Deformation-related recrystallization processes

NASA Astrophysics Data System (ADS)

Drury, Martyn R.; Urai, Janos L.

1990-02-01

Recrystallization is a common microstructural transformation that occurs during deformation, metamorphism and diagenesis of rocks. Studies on minerals and rock analogues have demonstrated that a wide range of recrystallization mechanisms can occur. The range of mechanisms is related to the various ways in which two basic processes, grain boundary migration and new grain boundary formation combine to transform the microstructure. Two recent papers (Drury et al., 1985; Urai et al., 1986) have proposed different schemes for the description of recrystallization mechanisms. The purpose of this paper is to provide a unified framework for the description of mechanisms. Recrystallization mechanisms are divided into three main types; rotation mechanisms which principally involve the formation of new grain boundaries; migration mechanisms which principally involve grain boundary migration; and general mechanisms which involve both basic processes. A further distinction is made on the basis of the continuity of the microstructural transformation with respect to time. Each of the three main types of mechanism can be divided into a number of sub-types depending on whether the processes of grain boundary migration, new grain boundary formation and new grain formation occur in a discontinuous or continuous manner with respect to time. As the terms continuous and discontinuous have been used in the metallurgical literature to signify the spatial continuity of the microstructural transformation, the terms discontinuai and continual are used to refer to the temporal continuity of the transformation. It is recommended that the following aspects should be specified, if possible, in a general description of recrystallization mechanisms: (1) How do the basic processes combine to transform the microstructure. (2) If new grain development occurs, what is the development mechanism, and does new grain formation occur in a continual or discontinuai manner. (3) If grain boundary migration is involved in the transformation, what is the migration mechanism (i.e. fast solute escape migration, slow solute loaded migration, fluid assisted migration, etc.), and is migration a continual or discontinuai process. The application of the unified scheme is illustrated by reviewing studies that have provided detailed information on the recrystallization mechanisms involved. The complicating effects of solid solution impurities, dispersed second phase particles and grain boundary fluid films are also considered and it is demonstrated that variations in content of these types of impurity can significantly effect the types of recrystallization that occur in a given material.

Oxygen Isotopes and the Cooling History of the Mount Barcroft Area, Central White Mountains, Easternmost California

NASA Astrophysics Data System (ADS)

Ernst, W. G.; Rumble, D.

2001-12-01

The White-Inyo Range + Owens Valley marks the western limit of the Basin and Range province, directly east of the Sierra Nevada. At Mount Barcroft, mid-Mesozoic, alkaline, bimodal White Mountain Peak metavolcanic + metaclastic rocks on the N are separated from Lower Cambrian siliciclastic + carbonate metasedimentary strata on the S by the NE-trending Middle Jurassic Barcroft mafic granodioritic pluton. It consists of mineralogically/chemically intergradational gabbro/diorite, granodiorite, metadiorite, and alaskite. Eastward, the section is intruded by the Late Cretaceous, ternary-minimum McAfee Creek Granite. Ignoring altered dikes, bulk-rock analyses of plutonic rocks indicate that metaluminous, I-type rocks of the Barcroft comagmatic suite possess an av(12) d18O value of 7.5. Slightly peraluminous, apparently S-type granitic rocks sensu stricto of the McAfee Creek series have an av(8) d18O value of 8.6. Evidence is lacking for large-scale bulk-rock interaction with near-surface waters, suggesting intermediate crustal depths of intrusion and cooling for these plutons. Coexisting Barcroft minerals exhibit consistent oxygen isotopic partitioning from high to low d18O in the sequence quartz > plagioclase > K-feldspar >> amphibole = biotite. Wall-rock quartz and biotite are richer in 18O than analogous phases in the plutonic rocks, and show slightly greater fractionations than igneous counterparts. Along its borders, late-stage exchange with heated aqueous fluids, derived from recrystallized wall rocks due to emplacement of the Middle Jurassic magma, increased 18O/16O ratios of dikes, and some Barcroft igneous plagioclase and subsolidus tremolite-actinolite. Oxygen isotope geothermometry for Barcroft quartz-amphibole and quartz-biotite pairs yields broadly similar temperatures; the combined average of 13 pairs is 519oC. A single quartz-biotite pair analyzed from a Lower Cambrian quartzite within the inner metamorphic aureole of the Barcroft pluton yields a temperature of 511oC, in agreement with values based on wall-rock metamorphic parageneses. Barcroft quartz, feldspars, biotite, and clinoamphiboles were subjected to exchange with deuteric fluid, and re-equilibrated under subsolidus conditions. Quartz-plagioclase pairs from two Barcroft granodiorites possess similar temperatures of 519 and 515oC, so also re-equilibrated at subsolidus temperatures. Areal distributions for quartz-plagioclase, quartz-clinoamphibole, and quartz-biotite pairs reveal that annealing temperatures are lowest in axial portions of the Barcroft granodioritic pluton. Late Cretaceous emplacement of the McAfee Creek Granite had little effect on d18O values of Barcroft minerals and bulk rocks.

The Variscan calc-alkalic plutonism of western Corsica: mineralogy and major and trace element geochemistry

NASA Astrophysics Data System (ADS)

Cocherie, A.; Rossi, Ph.; Le Bel, L.

1984-10-01

Petrographic and structural observations on the calc-alkalic plutonism of western Corsica revealed the existence of several successively emplaced units associated with large basic bodies. The present mineralogical and geochemical study deals with the genesis, evolution and relationships of these different units. Basic plutonism is represented by three genetically linked types of rock: norites and troctolites with cumulate textures characterized by low REE contents and either no Eu anomaly or a positive Eu anomaly; gabbros with enriched LREE relatively to HREE patterns, probably close to an initial basaltic liquid; and diorites ranging up to charnockites which represent liquids evolved to varying degrees, mainly by fractional crystallization. Trace element data and studies on the evolution of pyroxene pairs demonstrate the consanguinity of these calc-alkaline basic rocks which are derived from a high alumina basaltic melt. The various granitoids (granodiorites, monzogranites and leucocratic monzogranites, i.e., adamellites) have distinct evolution trends as shown by the composition of their mafic minerals and by trace element distributions. They cannot be considered as being derivatives of the basic suite and they cannot be related by a common fractionation sequence. Rather, they represent distinctive batches of crustal anatexis. In addition, hybridization phenomena with the basic melt are noticed in granodiorites. The particular problem of the low La/Yb, Eu/Eu∗ and the high U, Th, Cs leucocratic monzogranites is discussed in detail. In addition to more conventional trace element diagrams, the simultaneous statistical treatment of all the geochemical data by correspondence factor analysis is shown to be a very use tool in distinguishing between the different units and to classify the elements according to their geochemical properties.

The Merensky Reef in the Chineisky Pluton (Siberia)? A myth or a reality?

NASA Astrophysics Data System (ADS)

Zhitova, L.; Sharapov, V.; Zhukova, I.

2006-12-01

It is a dream of each geologist to find a `Merensky Reef' in each layered basic intrusion. Scientists have been trying many various techniques to come this dream to reality. The most perspective way to do so is probably a combination of physicochemical and computer modeling of layered basic intrusion crystallization together with fluid and melt inclusions studies in situ. This combination allows us to do the following: 1. To study boundary conditions for separation of low density gas phase and salt melt from the crystallizing primary basic melt in large magma chamber. 2. To determine correct quantitative parameters for formation of residual fluid-bearing brines extracting high metal concentrations. 3. To compute critical levels for substance differentiation at phase, geochemical and other `barriers' in those basic mantle-crust ore magmatic systems. 4. To model metal extraction, transportation and deposition at these `barriers' for systems of various `silicate melt - residual salt brines' ratios under the conditions of continental lithosphere. Comparison of real and modeled data allows us to conclude if a formation of a narrow zone of high metal concentration is possible at those critical levels (phase and geochemical `barriers'). The above-mentioned algorithm has been used for the Chineisky Pluton (the Transbaikal region, Siberia). Fortunately we have found our own `Merensky Reef', which happened to be a PGE enrichment marginal zone of the Chineisky Pluton due to specific fluid regime of crystallization! This work was supported by the Ministry for Russian Science and Education, Grant #DSP.2.1.1.702.

Bohemian circular structure, Czechoslovakia: Search for the impact evidence

NASA Technical Reports Server (NTRS)

Rajlich, Petr

1992-01-01

Test of the impact hypothesis for the origin of the circular, 260-km-diameter structure of the Bohemian Massif led to the discovery of glasses and breccias in the Upper Proterozoic sequence that can be compared to autogeneous breccias of larger craters. The black recrystallized glass contains small exsolution crystals of albite-oligoclase and biotite, regularly dispersed in the matrix recrystallized to quartz. The occurrence of these rocks is limited to a 1-sq-km area. It is directly underlain by the breccia of the pelitic and silty rocks cemented by the melted matrix, found on several tens of square kilometers. The melt has the same chemistry as rock fragments in major and in trace elements. It is slightly impoverished in water. The proportion of melted rocks to fragments varies from 1:5 to 10:1. The mineralogy of melt viens is the function of later, mostly contact metamorphism. On the contact of granitic plutons it abounds on sillimanite, cordierite, and small bullets of ilmenite. Immediately on the contact with syenodiorites it contains garnets. The metamorphism of the impact rock melt seems the most probable explanation of the mineralogy and the dry total fusion of rocks accompanied by the strong fragmentation. Other aspects of this investigation are discussed.

Bohemian circular structure, Czechoslovakia: Search for the impact evidence

NASA Astrophysics Data System (ADS)

Rajlich, Petr

Test of the impact hypothesis for the origin of the circular, 260-km-diameter structure of the Bohemian Massif led to the discovery of glasses and breccias in the Upper Proterozoic sequence that can be compared to autogeneous breccias of larger craters. The black recrystallized glass contains small exsolution crystals of albite-oligoclase and biotite, regularly dispersed in the matrix recrystallized to quartz. The occurrence of these rocks is limited to a 1-sq-km area. It is directly underlain by the breccia of the pelitic and silty rocks cemented by the melted matrix, found on several tens of square kilometers. The melt has the same chemistry as rock fragments in major and in trace elements. It is slightly impoverished in water. The proportion of melted rocks to fragments varies from 1:5 to 10:1. The mineralogy of melt viens is the function of later, mostly contact metamorphism. On the contact of granitic plutons it abounds on sillimanite, cordierite, and small bullets of ilmenite. Immediately on the contact with syenodiorites it contains garnets. The metamorphism of the impact rock melt seems the most probable explanation of the mineralogy and the dry total fusion of rocks accompanied by the strong fragmentation. Other aspects of this investigation are discussed.

Tectono-metamorphic evolution and magmatic processes in the thermo-metamorphic aureole of the Monte Capanne pluton (Elba Island, Northern Tyrrhenian Sea, Italy).

NASA Astrophysics Data System (ADS)

Morelli, M.; Pandeli, E.; Principi, G.

2003-04-01

Introduction In this work we present new structural and petrographic data collected in the thermo-metamorphic aureole of Monte Capanne (western Elba Island) and its metamorphic evolution. In the western Elba Island the Monte Capanne monzogranitic body (ca. 7 Ma) and its thermo-metamorphic aureole crop out. At least two different tectonic units can be distinguished: the Punta Le Tombe Unit, weak re-crystallized, and the Punta Nera Unit. In the latter one the re-crystallization is strong and a pre-intrusion tectono-metamorphic framework is evident (Morelli et al., 2002). The latter is mainly constituted by thermo-metamorphosed meta-ophiolites and meta-sedimentary successions previously correlated by Barberi et al. (1969) with the un-metamorphic ones (Complex IV and V of Trevisan, 1950) cropping out in the central-eastern Elba. According to Perrin (1975) and Reutter &Spohn (1982) a pre-intrusion tectono-metamorphic framework was recognized into such rocks. As suggested by Daniel &Jolivet (1995) complex relationships between metamorphic evolution and magmatic events are also recognizable. Geological Data The Punta Nera Unit crops out all around the Monte Capanne magmatic body and the primary contact with the underlying granitoid is somewhere preserved. This unit, strongly re-crystallized and locally crosscut by aplitic and porphyritic dikes, is represented by (Coli &Pandeli, 1997; Morelli, 2000) tectonized meta-serpentinites, meta-gabbros with rodingitic dikes, rare meta-basalts and meta-ophicalcites, meta-cherts, marbles, cherty meta-limestones, phyllites and meta-limestones with rare meta-arenites intercalations. A "pre-magmatic" tectono-metamorphic framework of this unit is well evident only in its meta-sedimentary portion. The meta-sediments are deformed by syn-metamorphic isoclinal folds caractherized by N-S trending axes, west dipping axial planes and easternward vergence. A later folding and flattening event clearly post-dated the above said folds and associated main foliation. Both at the meso- and micro-scale few generations of syn-/inter-kinematic and static thermo-metamorphic blasteses (e.g. biotite, wollastonite, garnet, epidote etc.) are evident. Finally weak local folding and faulting affected the Monte Capanne thermo-metamorphic aureole during the uplift of the cooled pluton. Along the coast of Spartaia (north-eastern side of Monte Capanne) the meta-sedimentary upper portion of the Punta Nera Unit crops out and it is represented by alternating marbles and phyllites with rare meta-arenites. Here, the relationships between tectono-metamorphic and thermo-metamorphic structures, and intrusive magmatic bodies are particularly evident. D_1M_1: is recognizable at the meso-scale only as rare relics of intrafolial isoclinal rootless hinges and locally as a transposed foliation (S1). At the microscope a relic fine-spaced foliation, locally preserved by the following re-crystallization and parallel to the original lithological partitions, is evident. The original mineral associations is often replaced by HT/LP mimetic and syn-kinematic or static blasteses. D_2M_2 is the most evident structural fabric pre-dating the thermo-metamorphic events. It is represented by tight to isoclinal folds with N-S trending axes and easternward vergence. At the microscope the S2 foliation deformed the previously S1 and at the fold hinges a variously penetrative discrete crenulation cleavage (S2) is recognizable. M_3 is the first thermo-metamorphic event. It is associated to the intrusions of the Capo Bianco, San Martino and Portoferraio laccoliths (between ca. 8 and 7.2 Ma, Rocchi et alii, 2002) along pre-existing tectonic and lithological discontinuity. The laccoliths clearly crosscut the tectono-metamorphic fabric of the Punta Nera Unit. At this first magmatic event is associated a HT/LP blastesis of static garnet, wollastonite and epidote. Close to the contact between the magmatic intrusive bodies the country rocks are strongly re-crystallized and the original structure is oblitered. D_3M_4: is linked to the intrusion of the Monte Capanne pluton (6.9 Ma). Because of the flattening of the country rocks a penetrative foliation, sub-parallel to the surface of the plutonic body, developed during its intrusion and the uplift. Fluidal structures and discharge folding also developed. This structures affected both the country rocks and the laccoliths intruded in. At the meso-scale are also evident fractures, filled by calcite, cutting the garnet/wollastonite aggregate and later flattened and-or partially transposed. Late felsic products associated with the Monte Capanne pluton partly are deformed by the flattening and partly cut the flattening structures. The contact between the pluton and the country rocks itself is locally deformed by flattening structures. At the microscope the growth of HT/LP minerals, mimetic on the previous associations, or syn-kinematic or static, is evident. M_5: finally, during the last intrusive event (Orano porphyries, 6.8 Ma) a static thermo-metamorphic blastesis locally occurs post-dating the structures previously described. Only gentle folding, veins and fractures formation, and faulting processes followed the tectono-metamorphic and thermo-metamorphic deformation events. Conclusions The Punta Nera Unit represents another important element to understand the relationships between Alps and Apennines. In fact, the evidences of a pre-granitoid polyphased tectono-metamorphic framework in this metamorphic oceanic unit allow to correlate it to the Schistes Lustrés of the Alpine Corsica (e.g. Inzecca Massif, Duran Delga, 1984) and of the Northern Tyrrhenian area (e.g. the outcrops of oceanic metamorphic units in the Gorgona Island, Giglio Island and eastern Elba Island: Bortolotti et al., 2001; Pandeli et alii, 2001; Rossetti et al., 2001; Orti et al., 2002). References Barberi et al. (1969). F.126. Isola d'Elba. Note Ill. Carta Geol. It., 1:100.000. Ser. Geol. d'It. Bortolotti V. et al. (2001), Ofioliti, 26, 2001. Coli &Pandeli, (2001), Ofioliti, 26, 2001. Daniel &Jolivet, (1995), Bull. Soc. Geol. France, 166(4), 341--354. Durand-Delga M. (1984), Mem. Soc. Geol. It., 28, 285--329. Morelli M. et alii, (2002), Proceedings of Eurogranites 2002, 15th--21th Sept. 2002. Orti et alii, (2002), Ofioliti, 27, 2002. Pandeli et alii, (2001), Ofioliti, 26, 2001. Perrin M. (1975), Boll. Soc. Geol. It., 94, pp.1929--1955. Reutter K.J. and Spohn A., (1982), Ofioliti, 7, 467--478. Rocchi et alii, (2002), in Eurogranites 2002 Field Meeting Guide. 15th--21th Sept. 2002 Rossetti et al., (2001), Ofioliti, 26, 2001. Trevisan L., (1950), Mem. Ist. Geol. Univ. Padova, 16, 2--39.

GRANITE FIORDS WILDERNESS STUDY AREA, ALASKA.

USGS Publications Warehouse

Berg, Henry C.; Pittman, Tom L.

1984-01-01

Mineral surveys of the Granite Fiords Wilderness study area revealed areas with probable and substantiated mineral-resource potential. In the northeastern sector, areas of probable and substantiated resource potential for gold, sivler, and base metals in small, locally high grade vein and disseminated deposits occur in recrystallized Mesozoic volcanic, sedimentary, and intrusive rocks. In the central part, areas of probable resource potential for gold, silver, copper, and zinc in disseminated and locally massive sulfide deposits occur in undated pelitic paragneiss roof pendants. A molybdenite-bearing quartz vein has been prospected in western Granite Fiords, and molybdenum also occurs along with other metals in veins in the northeastern sector and in geochemical samples collected from areas where there is probable resource potential for low-grade porphyry molybdenum deposits in several Cenozoic plutons. No energy resource potential was identified in the course of this study.

Submarine hydrothermal metamorphism of the Del Puerto ophiolite, California.

USGS Publications Warehouse

Evarts, R.C.; Schiffman, P.

1983-01-01

Metamorphic zonation overprinted on the volcanic member and overlying volcanogenic sediments of the ophiolite complex increases downward in grade and is characterized by the sequential appearance with depth of zeolites, ferric pumpellyite and pistacitic epidote. Metamorphic assemblages of the plutonic member of the complex are characterized by the presence of calcic amphibole. The overprinting represents the effects of hydrothermal metamorphism resulting from the massive interaction between hot igneous rocks and convecting sea-water in a submarine environment. A thermal gradient of 100oC/km is postulated to account for the zonal recrystallization effects in the volcanic member. The diversity and sporadic distribution of mineral assemblages in the amphibole zone are considered due to the limited availability of H2O in the deeper part of the complex. Details of the zonation and representative microprobe analyses are tabulated.-M.S.

Cyclic Ductile-Brittle Deformation during Temperature Decrease in Quartz-Rich Mylonites: Insights from the Calamita Schists (Elba Island, Italy)

NASA Astrophysics Data System (ADS)

Papeschi, S.; Menegon, L. M.; Musumeci, G.

2017-12-01

The Calamita Schists are a metamorphic complex that experienced transient (< 1 Ma) upper Miocene HT/LP metamorphism related to the emplacement of the Porto Azzurro pluton at P<0.2 GPa. HT/LP metamorphism was coeval with regional scale contractional tectonics leading to the development of meter to decameter ductile east-verging high-strain domains marked by mylonitic fabric overprinted by non-Andersonian brittle faults. In order to investigate the switch in deformation mechanism during temperature decrease at constant pressure (P<0.2 GPa), a sample of mylonitic quartzite with S-C' fabric was examined by Electron Backscatter Diffraction (EBSD), optical microscopy and Scanning Electron Microscope (SEM). Mylonitic fabric is marked by synkinematic biotite + cordierite + andalusite + K-feldspar assemblage, which is progressively replaced by retrograde white mica + chlorite. Quartz microfabric is defined by coarse-grained (100-900 µm) quartz porphyroclasts wrapped by ribbons of dynamically recrystallized finer grains ( 50 µm) showing a strong CPO. This fabric is cross cut by conjugate and synthetic C'-shear bands localized in porphyroclasts and marked by recrystallized fine grains (5-50 µm). EBSD data indicate that prism was the dominant slip system during crystal plastic deformation and dynamic recrystallization in the polycrystalline ribbons. Subsequently, brittle deformation localized along intracrystalline bands (both in conjugate sets and parallel to C' shear bands) within quartz porphyroclasts. The bands evolved in localized cataclastic micro-shear zones and in shear fractures, which localized fluid infiltration and healing by solution precipitation. The quartz new grains filling the bands are preferentially oriented with their c-axis parallel to the shear band boundary. This work highlights that deformation in the Calamita Schists switched over time from high-temperature dynamic recrystallization, accommodated by prism slip to low grade brittle-ductile processes. At the brittle-ductile transition strain partitioning was controlled by grain size and fluid penetration and was characterized by cyclical ductile-brittle mechanisms. In particular brittle failure localized in coarse-grains acted as the precursor for ductile C' shear bands.

Metamorphism and plutonism around the middle and south forks of the Feather River, California

USGS Publications Warehouse

Hietanen, Anna Martta

1976-01-01

The area around the Middle and South Forks of the Feather River provides information on metamorphic and igneous processes that bear on the origin of andesitic and granitic magmas in general and on the variation of their potassium content in particular. In the north, the area joins the Pulga and Bucks Lake quadrangles studied previously. Tectonically, this area is situated in the southern part of an arcuate segment of the Nevadan orogenic belt in the northwestern Sierra Nevada. The oldest rocks are metamorphosed calcalkaline island-arc-type andesite, dacite, and sodarhyolite with interbedded tuff layers (the Franklin Canyon Formation), all probably correlative with Devonian rocks in the Klamath Mountains. Younger rocks form a sequence of volcanic, volcaniclastic, and sedimentary rocks including some limestone (The Horseshoe Bend Formation), probably Permian in age. All the volcanic and sedimentary rocks were folded and recrystallized to the greenschist facies during the Nevadan (Jurassic) orogeny and were invaded by monzotonalitic magmas shortly thereafter. A second lineation and metamorphism to the epidote-amphibolite facies developed in a narrow zone around the plutons. In light of the concept of plate tectonics, it is suggested that the early (Devonian?) island-arc-type andesite, dacite, and sodarhyolite (the Franklin Canyon Formation) were derived from the mantle above a Benioff zone by partial melting of peridotite in hydrous conditions. The water was probably derived from an oceanic plate descending to the mantle. Later (Permian?) magmas were mainly basaltic; some discontinuous layers of potassium-rich rhyolite indicate a change into anhydrous conditions and a deeper level of magma generation. The plutonic magmas that invaded the metamorphic rocks at the end of the Jurassic may contain material from the mantle, the subducted oceanic lithosphere, and the downfolded metamorphic rocks. The ratio of partial melts from these three sources may have changed with time, giving rise to the diversity in composition of magmas.

Pre-Elsonian mafic magmatism in the Nain Igneous Complex, Labrador: the bridges layered intrusion

USGS Publications Warehouse

Ashwal, L.D.; Wiebe, R.A.; Wooden, J.L.; Whitehouse, M.J.; Snyder, Diane

1992-01-01

Decades of work on the pristine, unmetamorphosed, and well exposed anorthositic, mafic and granitic rocks of the Nain igneous complex, Labrador, have led to the conclusion that all plutonic rocks in that area were emplaced in a short time intercal at about 1300 ?? 10 Ma). We report here new isotopic data for mafic intrusive rocks that appear to have crystallized several hundred Ma earlier than the bulk of the plutonic activity in the Nain complex. The Bridges layered intrusion (BLI) is a small (15-20 km2) lens of layered mafic rocks about 1.5 km thick, surrounded and intruded by anorthositic, leuconoritic and leucotroctolitic plutons in the middle of the coastal section of the Nain igneous complex. BLI shows very well developed magmatic structures, including channel scours, slump structures, and ubiquitous modally graded layering. Most rocks, however, show granular textures indicative of recrystallization, presumably caused by emplacement of younger anorthositic rocks. BLI contains cumulate rocks with slightly more primitive mineral compositions (An60-83, Fo66-71) than those of other mafic intrusions in the Nain igneous complex, including Kiglapait. SmNd isotopic data for 7 BLI whole-rocks ranging in composition between olivine melagabbro and olivine leucogabbro yield an age of 1667 ?? 75 Ma, which we interpret as the time of primary crystallization. The internal isotopic systematics of the BLI have been reset, probably by intrusion of adjacent anorthositic plutons. A SmNd mineral isochron (plag, whole-rock, mafics) for a BLI olivine melagabbro gives an age of 1283 ?? 22 Ma, equivalent within error of a mineral array (plag, whole-rock, opx, cpx) for an adjacent, igneous-textured, leuconorite vein (1266 ?? 152 Ma). The initial Nd ratio for BLI corresponds to ??{lunate}Nd = -3.18 ?? 0.44. Other whole-rock samples, however, some with vein-like alteration (Chlorite, serpentine, amphiboles), show ??{lunate}Nd values as low as -9.1, suggesting variable contamination by direct assimilation of early Archean crustal rocks and/or by fluids that have interacted with such crust. Adjacent anorthositic rocks also show variable ??{lunate}Nd some as low as -14.7, implying larger degrees if crustal assimilation, perhaps by parental magmas during lower crustal ponding prior to emplacement. These contamination effects preclude straightforward determination of the isotopic character of mantle sources for both BLI and the anorthositic rocks. ?? 1992.

Composite Magnetite and Protein Containing CaCO3 Crystals. External Manipulation and Vaterite → Calcite Recrystallization-Mediated Release Performance.

PubMed

Sergeeva, Alena; Sergeev, Roman; Lengert, Ekaterina; Zakharevich, Andrey; Parakhonskiy, Bogdan; Gorin, Dmitry; Sergeev, Sergey; Volodkin, Dmitry

2015-09-30

Biocompatibility and high loading capacity of mesoporous CaCO3 vaterite crystals give an option to utilize the polycrystals for a wide range of (bio)applications. Formation and transformations of calcium carbonate polymorphs have been studied for decades, aimed at both basic and applied research interests. Here, composite multilayer-coated calcium carbonate polycrystals containing Fe3O4 magnetite nanoparticles and model protein lysozyme are fabricated. The structure of the composite polycrystals and vaterite → calcite recrystallization kinetics are studied. The recrystallization results in release of both loaded protein and Fe3O4 nanoparticles (magnetic manipulation is thus lost). Fe3O4 nanoparticles enhance the recrystallization that can be induced by reduction of the local pH with citric acid and reduction of the polycrystal crystallinity. Oppositely, the layer-by-layer assembled poly(allylamine hydrochloride)/poly(sodium styrenesulfonate) polyelectrolyte coating significantly inhibits the vaterite → calcite recrystallization (from hours to days) most likely due to suppression of the ion exchange giving an option to easily tune the release kinetics for a wide time scale, for example, for prolonged release. Moreover, the recrystallization of the coated crystals results in formulation of multilayer capsules keeping the feature of external manipulation. This study can help to design multifunctional microstructures with tailor-made characteristics for loading and controlled release as well as for external manipulation.

Deformation microstructures of Barre granite: An optical, Sem and Tem study

USGS Publications Warehouse

Schedl, A.; Kronenberg, A.K.; Tullis, J.

1986-01-01

New scanning electron microscope techniques have been developed for characterizing ductile deformation microstructures in felsic rocks. In addition, the thermomechanical history of the macroscopically undeformed Barre granite (Vermont, U.S.A.) has been reconstructed based on examination of deformation microstructures using optical microscopy, scanning electron microscopy, and transmission electron microscopy. The microstructures reveal three distinct events: 1. (1) a low-stress, high-temperature event that produced subgrains in feldspars, and subgrains and recrystallized grains in quartz; 2. (2) a high-stress, low-temperature event that produced a high dislocation density in quartz and feldspars; and 3. (3) a lowest-temperature event that produced cracks, oriented primarily along cleavage planes in feldspars, and parallel to the macroscopic rift in quartz. The first two events are believed to reflect various stages in the intrusion and cooling history of the pluton, and the last may be related to the last stages of cooling, or to later tectonism. ?? 1986.

First Evidence of Middle Triassic Basic Magmatism in the Southwestern Part of the Dzhugdzhur-Stanovoi Superterrane (Ilikan Terrane)

NASA Astrophysics Data System (ADS)

Buchko, I. V.; Sorokin, A. A.; Rodionov, A. A.; Kudryashov, N. M.

2018-04-01

U-Pb ID-TIMS zircon analyses of the Dzhigda gabbro-gabbrodiorite Massif (Ilikan block in the southwestern part of the Dzhugdzhur-Stanovoi superterrane) have been carried out. The results demonstrate that the formation of the massif at 244 ± 5 Ma corresponds to one of the stages of formation of the Selenga-Vitim volcano-plutonic belt. The latter stretches along the southeastern margin of the North Asian Craton along its border with the Mongol-Okhotsk fold belt. This indicates that the Selenga-Vitim volcano-plutonic belt along with granitoids and volcanics comprises Permian-Triassic massifs and that this belt is superimposed onto structures of not only the Selenga-Stanovoi terrane but also the Dzhugdzhur-Stanovoi terrane.

Geology of quadrangles H-12, H-13, and parts of I-12 and I-13, (zone III) in northeastern Santander Department, Colombia

USGS Publications Warehouse

Ward, Dwight Edward; Goldsmith, Richard; Cruz, Jaime B.; Restrepo, Hernan A.

1974-01-01

A program of geologic mapping and mineral investigation in Colombia was undertaken cooperatively by the Colombian Instituto Nacional de Investigaciones Geologico-Mineras (formerly known as the Inventario Minero Nacional), and the U. S. Geological Survey; by the Government of Colombia and the Agency for International Development, U. S. Department of State. The purpose was to study, and evaluate mineral resources (excluding of petroleum, coal, emeralds, and alluvial gold) of four selected areas, designated Zones I to IV, that total about 70,000 km2. The work in Zone III, in the Cordillera Oriental, was done from 1965 to 1968. The northeast trend of the Cordillera Oriental of Colombia swings abruptly to north-northwest in the area of this report, and divides around the southern end of the Maracaibo Basin. This section of the Cordillera Oriental is referred to as the Santander Massif. Radiometric age determinations indicate that the oldest rocks of the Santander massif are Precambrian and include high-grade gneiss, schist, and migmatite of the Bucaramanga Formation. These rocks were probably part of the Precambrian Guayana Shield. Low- to medium-grade metamorphic rocks of late Precambrian to Ordovician age .include phyllite, schist, metasiltstone, metasandstone, and marble of the Silgara Formation, a geosynclinal series of considerable extent in the Cordillera Oriental and possibly the Cordillera de Merida of Venezuela. Orthogneiss ranging from granite to tonalite is widely distributed in the high- and medium-grade metamorphic rocks of the central core of the massif and probably represents rocks of two ages, Precambrian and Ordovician to Early Devonian. Younger orthogneiss and the Silgara are overlain by Middle Devonian beds of the Floresta Formation which show a generally low but varying degree of metamorphism. Phyllite and argillite are common, and infrequent marble and other calcareous beds are fossiliferous. Except for recrystallization in limestones of !the Permian-Carboniferous Diamante Formation, sedimentary rocks younger than Devonian are unmetamorphosed. The effects of Precambrian regional dynamothermal metamorphism and plutonism on Precambrian geosynclinal deposits reached the upper amphibolite facies in the Bucaramanga Gneiss. The geosynclinal Silgara Formation was subjected to similar conditions in Late Ordovician and Early Silurian time but reached only the greenschist or lower amphibolite facies. Orthogneisses generally show a concordance of foliation and lineation with the neighboring Silgara Formation and the Bucaramanga Gneiss as well as similarities in grade of metamorphism. Regional dynamothermal metamorphism in Late Permian and Triassic time reached, low grade in the Floresta Formation and caused recrystallization of limestone of the Diamante Formation. The Bucaramanga and Silgara metamorphic rocks show evidence of metrogressive metamorphism accompanied by high activity or potassium and water, but whether this occurred at the time the Floresta was metamorphosed or later is not clear. Batholiths, plutons, and stocks of igneous rocks in the Santander massif range from diorite to granite. Radioactive age data indicate that most belong to a single plutonic interval. These are referred to as the Santander Plutoniq Group and are Jurassic and Jurassic-Triassic- Two suites of this group are pink granite and quartz monzonite, and gray quartz monzonite and granodiorite. Contact relations indicate that the pink and more granitic rocks are younger than the gray and more mafic rocks, but radioactive age data are in conflict with this. Undated plutonic rocks that are not clearly related to the group are assigned to relatively older or younger age positions. West of the Bucanamanga fault rhyolite makes up a small body at one locality and forms an intrusive sheet with granophyre and intrusive breccias in Triassic sedimentary rocks at another locality. Its age is unknown, but it probably is younger than the

Heterogeneous brittle-ductile deformation at shallow crustal levels under high thermal conditions: The case of a synkinematic contact aureole in the inner northern Apennines, southeastern Elba Island, Italy

NASA Astrophysics Data System (ADS)

Papeschi, Samuele; Musumeci, Giovanni; Mazzarini, Francesco

2017-10-01

We present an example of interaction between magmatism and tectonics at shallow crustal levels. In the Late Miocene the metamorphic units of the eastern Elba Island (northern Apennines) were intruded at very shallow crustal levels by a large pluton (> 60 km2) with the development of an hectometre-sized contact aureole defined by growth of low-pressure/high-temperature mineral assemblages (Pmax < 0.2 GPa, Tmax 650 °C). Structural data show that the contact aureole is associated with a km-sized antiform of the foliation and by several metre- to decametre-thick high-strain domains consisting of strongly foliated rocks containing synkinematic HT/LP mineral assemblages and ductile shear zones of variable thickness. These shear zones are characterized by a mylonitic foliation variably overprinted by cataclasis. Quartz microfabrics indicate that the dynamic crystallization processes progressively changed from grain boundary migration, associated with the thermal peak of contact metamorphism, to subgrain rotation and bulging recrystallization, the latter mostly associated with the cataclastic overprint. These transitions of recrystallization mechanisms in quartz are related to a progressive decrease of temperature during deformation. Deformation accompanied the development and cooling of the contact aureole, which recorded the switch from high temperature ductile to low temperature brittle conditions. The geometry of the studied deformation structures is consistent with the constraints of the regional tectonic evolution and its local interaction with the localized and transient thermal anomaly related to the coeval emplacement of igneous rocks.

Late Mesoproterozoic to Early Paleozoic history of metamorphic basement from the southeastern Chiapas Massif Complex, Mexico, and implications for the evolution of NW Gondwana

NASA Astrophysics Data System (ADS)

Weber, Bodo; González-Guzmán, Reneé; Manjarrez-Juárez, Román; Cisneros de León, Alejandro; Martens, Uwe; Solari, Luigi; Hecht, Lutz; Valencia, Victor

2018-02-01

In this paper, U-Pb zircon geochronology, Lu-Hf and Sm-Nd isotope systematics, geochemistry and geothermobarometry of metaigneous basement rocks exposed in the southeastern Chiapas Massif Complex are presented. Geologic mapping of the newly defined "El Triunfo Complex" located at the southeastern edge of the Chiapas Massif reveals (1) partial melting of a metamorphic basement mainly constituted by mafic metaigneous rocks (Candelaria unit), (2) an Ediacaran metasedimentary sequence (Jocote unit), and (3) occurrence of massif-type anorthosite. All these units are intruded by undeformed Ordovician plutonic rocks of the Motozintla suite. Pressure and temperature estimates using Ca-amphiboles, plagioclase and phengite revealed prograde metamorphism that reached peak conditions at 650 °C and 6 kbar, sufficient for partial melting under water saturated conditions. Relict rutile in titanite and clinopyroxene in amphibolite further indicate a previous metamorphic event at higher P-T conditions. U-Pb zircon ages from felsic orthogneiss boudins hosted in deformed amphibolite and migmatite yield crystallization ages of 1.0 Ga, indicating that dry granitic protoliths represent remnants of Rodinia-type basement. Additionally, a mid-Tonian ( 920 Ma) metamorphic overprint is suggested by recrystallized zircon from a banded gneiss. Zircon from folded amphibolite samples yield mainly Ordovician ages ranging from 457 to 444 Ma that are indistinguishable from the age of the undeformed Motozintla plutonic suite. Similar ages between igneous- and metamorphic- zircon suggest a coeval formation during a high-grade metamorphic event, in which textural discrepancies are explained in terms of differing zircon formation mechanisms such as sub-solidus recrystallization and precipitation from anatectic melts. In addition, some amphibolite samples contain inherited zircon yielding Stenian-Tonian ages around 1.0 Ga. Lu-Hf and Sm-Nd isotopes and geochemical data indicate that the protoliths of the amphibolite have E-MORB characteristics and were derived from a depleted mantle source younger than the Rodinia-type basement. Inasmuch as similar amphibolites also occur in the Ediacaran metasedimentary rocks as dykes or lenses, Late Neoproterozoic magmatism in a rift setting is suggested. Hence, the geologic record of the El Triunfo Complex includes evidences for Rodinia assemblage, Tonian circum-Rodinia subduction, and breakup during the Late Neoproterozoic. Metamorphism, and partial melting are interpreted in terms of a convergent margin setting during the Ordovician. The results place the southern Chiapas Massif along with Oaxaquia and similar Northern Andes terranes on the NW margin of Gondwana interpreted as the extension of the Famatinian orogen that evolved during the closure of the Iapetus Ocean.

Introduction to the Apollo collections. Part 1: Lunar igneous rocks

NASA Technical Reports Server (NTRS)

Mcgee, P. E.; Warner, J. L.; Simonds, C. H.

1977-01-01

The basic petrographic, chemical, and age data is presented for a representative suite of igneous rocks gathered during the six Apollo missions. Tables are given for 69 samples: 32 igneous rocks and 37 impactites (breccias). A description is given of 26 basalts, four plutonic rocks, and two pyroclastic samples. The textural-mineralogic name assigned each sample is included.

A Cost-Effective Two-Part Experiment for Teaching Introductory Organic Chemistry Techniques

ERIC Educational Resources Information Center

Sadek, Christopher M.; Brown, Brenna A.; Wan, Hayley

2011-01-01

This two-part laboratory experiment is designed to be a cost-effective method for teaching basic organic laboratory techniques (recrystallization, thin-layer chromatography, column chromatography, vacuum filtration, and melting point determination) to large classes of introductory organic chemistry students. Students are exposed to different…

The clumped-isotope geochemistry of exhumed marbles from Naxos, Greece

NASA Astrophysics Data System (ADS)

Ryb, U.; Lloyd, M. K.; Stolper, D. A.; Eiler, J. M.

2017-07-01

Exhumation and accompanying retrograde metamorphism alter the compositions and textures of metamorphic rocks through deformation, mineral-mineral reactions, water-rock reactions, and diffusion-controlled intra- and inter-mineral atomic mobility. Here, we demonstrate that these processes are recorded in the clumped- and single-isotope (δ13 C and δ18 O) compositions of marbles, which can be used to constrain retrograde metamorphic histories. We collected 27 calcite and dolomite marbles along a transect from the rim to the center of the metamorphic core-complex of Naxos (Greece), and analyzed their carbonate single- and clumped-isotope compositions. The majority of Δ47 values of whole-rock samples are consistent with exhumation- controlled cooling of the metamorphic complex. However, the data also reveal that water-rock interaction, deformation driven recrystallization and thermal shock associated with hydrothermal alteration may considerably impact the overall distribution of Δ47 values. We analyzed specific carbonate fabrics influenced by deformation and fluid-rock reaction to study how these processes register in the carbonate clumped-isotope system. Δ47 values of domains drilled from a calcite marble show a bimodal distribution. Low Δ47 values correspond to an apparent temperature of 260 °C and are common in static fabrics; high Δ47 values correspond to an apparent temperature of 200 °C and are common in dynamically recrystallized fabrics. We suggest that the low Δ47 values reflect diffusion-controlled isotopic reordering during cooling, whereas high Δ47 values reflect isotopic reordering driven by dynamic recrystallization. We further studied the mechanism by which dynamic recrystallization may alter Δ47 values by controlled heating experiments. Results show no significant difference between laboratory reactions rates in the static and dynamic fabrics, consistent with a mineral-extrinsic mechanism, in which slip along crystal planes was associated with atomic-scale isotopic reordering in the calcite lattice. An intrinsic mechanism (enhanced isotopic reordering rate in deformed minerals) is contraindicated by these experiments. We suggest that Δ47 values of dynamically recrystallized fabrics that form below the diffusion-controlled blocking-temperature for calcite constrain the temperature of deformation. We find that Δ47-based temperatures of static fabrics from Naxos marbles are ∼60-80 °C higher than commonly observed in slowly cooled metamorphic rocks, and would suggest cooling rates of ∼105 °CMyr-1. A similar thermal history is inferred for dolomite marbles from the core vicinity, which preserve apparent temperatures up to 200 °C higher than a typical blocking temperature (∼300 °C). This finding could be explained by a hydrothermal event driving a brief thermal pulse and locally resetting Δ47 values. Rapid cooling of the core-complex region is consistent with a compilation of published cooling ages and a new apatite U-Th/He age, associating the thermal event with the emplacement of a granodiorite pluton at ∼12 Ma.

Magma interaction in the root of an arc batholith

NASA Astrophysics Data System (ADS)

Chapman, T.; Robbins, V.; Clarke, G. L.; Daczko, N. R.; Piazolo, S.

2016-12-01

Fiordland, New Zealand, preserves extensive Cretaceous arc plutons, emplaced into parts of the Delamerian/Ross Orogen. Dioritic to gabbroic material emplaced at mid to lower crustal levels are exposed in the Malaspina Pluton (c. 1.2 GPa) and the Breaksea Orthogneiss (c. 1.8 GPa). Distinct magmatic pulses can be mapped in both of these plutons consistent with cycles of melt advection. Relationships are consistent with predictions from lower crustal processing zones (MASH and hot zones) considered important in the formation of Cordilleran margins. Metamorphic garnet growth is enhanced along magmatic contacts, such as where hornblende gabbronorite is cut by garnet-clinopyroxene-bearing diorite. Such features are consistent with cycles of incremental emplacement, younger magma having induced localised garnet granulite metamorphism in wall rock of older material. Temperature estimates and microstructures preserved in garnet granulite are consistent with sub-solidus, water-poor conditions in both the Malaspina and Breaksea Orthogneiss. The extent and conditions of the metamorphism implies conditions and duration was incapable of partially melting older wall rock material. The nature of interactions in intermediate to basic compositions are assessed in terms of magma genesis in the Cretaceous batholith. Most of the upper crustal felsic I-type magmatism along the margin being controlled by high-pressure garnet-clinopyroxene fractionation.

Petrology and geobarometry of Admiralty-Revillagigedo belt granitoids near Petersburg, southeastern Alaska

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hammarstrom, J.M.; Brew, D.A.

1993-04-01

The Admiralty-Revillagigedo belt (ARB) of southeastern Alaska is an approximately 400 mile long northwest-trending belt of Late Cretaceous ([approximately]95 Ma) calcalkalic plutons that extends from Juneau to Ketchikan. The ARB is bounded on the east by the younger Coast plutonic complex sill and on the west by the mid-Cretaceous Muir-Chichagof plutonic belt. Near Petersburg, the ARB consists of a variety of plutons that include equigranular and porphyritic quartz diorite, tonalite, quartz monzodiorite, and granodiorite. Minerals in these plutons are: hornblende, biotite, plagioclase, potassium feldspar, quartz, apatite, zircon, titanite, and ilmenite [+-] epidote, minor allanite, magnetite, grossular-almandine garnet, clinopyroxene, and locallymore » trace amounts of sulfide minerals. New geochemical data for six samples from three plutons near Petersburg overlap data for the rest of the ARB, which is metaluminous to slightly peraluminous. The central ARB granitoids are moderately LREE-enriched with slightly negative to slightly positive europium anomalies. High strontium (700 to 800 ppm) and low rubidium contents in central ARB plutons overlap compositions of ARB plutons to the north and south, and magmatic epidote-bearing plutons elsewhere. Pressure estimates for pluton emplacement based on hornblende geobarometry (6 to 9 kbars) are compatible with pressure estimates for plutons to the south and for metamorphic aureole assemblages around ARB plutons elsewhere in the western metamorphic belt of southeastern Alaska. These data support the chemical consanguinity of plutons along the length of the magmatic arc now preserved as the ARB and suggest that the whole ARB has been uplifted and eroded to expose plutons emplaced at relatively deep crustal levels.« less

Magnetic Fabric and Paleomagnetism of the Peninsular Ranges Batholith, Sierra San Pedro M rtir, Baja California.

NASA Astrophysics Data System (ADS)

Knight, M.; Herrero-Bervera, E.; Molina-Garza, R. S.; Böhnel, H. N.

2003-12-01

We summarize results of recent paleomagnetic, structural, petrologic and magnetic fabric studies along an east-west (60 km long) transect across the Peninsular Ranges Batholith (PRB) in north-central Baja California. The transect includes both magnetite rich plutons from the western sector of the PRB, and ilmenite rich plutons from the eastern sector, as well as plutons on the eastern and western side of major tectonic discontinuities. We include results for 8 plutons, included well-characterized bodies such as San Pedro M rtir (SP), San José (SJ) and La Zarza (LZ), and relatively little known plutons such as Potrero (PO), Aguaje del Burro (AB), El Milagro (MI), and San Telmo (ST). Plutons on the western sector of the PRB yield a paleomagnetic pole at 82° N-186.4° E (A95=4.8° ). When rotated into a pre- Gulf of California position, the pole (79.2° -188.2° ) is statistically undistinguishable from the North American reference pole. In contrast, SP, SJ and PO plutons, on either side of the NW trending Main Martir Thrust yield clearly discordant direction that can only be reconciled with results for the western plutons assuming southwestward tilt of ˜ 25° for SP and greater than 45° for SJ and PO. We find strong evidence in support of tilt of the plutons from thermochronological, structural, and geobarometric data. These data will be discussed elsewhere. Here we focus on magnetic fabric data. AMS for SJ is strongly developed with high values for degree of anisotropy (P= 1.14 a 1.40), but marked east-west asymmetry that contrasts with the general symmetry of the pluton along a north-south axis. Oblate fabrics (T ˜ +0.4) with dispersed lineation directions dominate the west side of the pluton and prolate fabrics (T ˜ -0.15) with steep to vertical lineations dominate on its eastern side. This fabric is interpreted to result from magma flow. SP, a much larger pluton and sensibly asymmetric, displays high degrees of anisotropy (P ˜1.2) on its western side but dominantly oblate (T ˜ +0.4) fabric, with foliations parallel to the pluton margins. In contrast, the eastern side of the pluton displays low P values ( ˜ 1.06-1.10), but markedly oblate fabrics (T ˜ +0.6) parallel to the pluton margin. Fabrics in the pluton interior are weakly developed. These data are interpreted to support models of pluton emplacement that involve drag (vertical shear) along the western margin of the pluton along the Main M rtir Thrust during pluton ascent, thus facilitating tilt and deformation of the smaller plutons to the west.

Magmatic tempo of Earth's youngest exposed plutons as revealed by detrital zircon U-Pb geochronology.

PubMed

Ito, Hisatoshi; Spencer, Christopher J; Danišík, Martin; Hoiland, Carl W

2017-09-29

Plutons are formed by protracted crystallization of magma bodies several kilometers deep within the crust. The temporal frequency (i.e. episodicity or 'tempo') of pluton formation is often poorly constrained as timescales of pluton formation are largely variable and may be difficult to resolve by traditional dating methods. The Hida Mountain Range of central Japan hosts the youngest exposed plutons on Earth and provides a unique opportunity to assess the temporal and spatial characteristics of pluton emplacement at high temporal resolution. Here we apply U-Pb geochronology to zircon from the Quaternary Kurobegawa Granite and Takidani Granodiorite in the Hida Mountain Range, and from modern river sediments whose fluvial catchments include these plutons in order to reconstruct their formation. The U-Pb data demonstrate that the Kurobegawa pluton experienced two magmatic pulses at ~2.3 Ma and ~0.9 Ma; whereas, to the south, the Takidani pluton experienced only one magmatic pulse at ~1.6 Ma. These data imply that each of these magmatic systems were both spatially and temporally distinct. The apparent ~0.7 Myr age gap between each of the three magmatic pulses potentially constrains the recharge duration of a single pluton within a larger arc plutonic complex.

Emplacement of the Santa Rita Flat pluton as a pluton-scale saddle reef

NASA Astrophysics Data System (ADS)

Vines, John A.; Law, Richard D.

2000-12-01

Regional mapping indicates that the Middle Jurassic Santa Rita Flat pluton, exposed in the Inyo Range of eastern California, is situated within the core of a south-plunging synform defined by bedding in the surrounding metasedimentary wall rocks, which dip beneath the pluton. However, bedding in rocks preserved above the pluton defines a south-plunging antiform. Anisotropy of magnetic susceptibility analysis revealed that magnetic foliation within the pluton also defines a south-plunging antiform, and the accompanying magnetic lineation plunges subparallel to the axis of this antiform. Our data indicate that the pluton was initially intruded as a sill in the hinge zone of the enveloping synform. Subsequent vertical inflation of the sill resulted in upward doming of the overlying roof and formation of the antiform now observed at the current erosion level in the pluton and preserved roof rocks. Emplacement of the pluton at 164 ± 1.5 Ma (U-Pb zircon age) overlaps in time with regional thrust faulting and folding ca. 185 148 Ma recognized in the southern Inyo Range. We speculate that space for initial emplacement of the pluton was produced during folding by layer-parallel slip and hinge-zone dilation, producing a saddle reef-like structure.

Plutons and accretionary episodes of the Klamath Mountains, California and Oregon

USGS Publications Warehouse

Irwin, William P.; Wooden, Joseph L.

1999-01-01

The Klamath Mountains consist of various accreted terranes and include many plutons that range in composition from gabbro to granodiorite. Some of the plutons (preaccretionary plutons) were parts of terranes before the terranes accreted; others (accretionary plutons) intruded during or after the accretion of their host terrane(s). This report attempts to (1) graphically illustrate how the Klamath Mountains grew by the accretion of allochthonous oceanic terranes during early Paleozoic to Cretaceous times, (2) identify the plutons as either preaccretionary or accretionary, and (3) genetically relate the plutonic intrusions to specific accretionary episodes. The eight accretionary episodes portrayed in this report are similar to those shown by Irwin and Mankinen (1998) who briefly described the basis for the timing of the episodes and who illustrated the ~110 degrees of clockwise rotation of the Klamath Mountains since Early Devonian time. Each episode is named for the accreting terrane. In all episodes (Figs. 1-8), the heavy black line represents a fault that separates the accreting oceanic rocks on the left from earlier accreted terranes on the right. The preaccretionary plutons are shown within the accreting oceanic crustal rocks to the left of the heavy black line, and the accretionary plutons in most instances are shown intruding previously accreted terranes to the right. Episodes earlier than the Central Metamorphic episode (Fig. 1), and that may have been important in the formation of the early Paleozoic nucleous of the province (the Eastern Klamath terrane), are not known. The 'Present Time' distribution of the accreted terranes and plutons is shown at a large scale in Figure 9. The schematic vertical section (Fig. 10) depicts the terranes as a stack of horizontal slabs that include or are intruded by vertical plutons. Note that at their base the ~170 Ma preaccretionary plutons of the Western Hayfork subterrane are truncated by the ~164 Ma Salt Creek accretionary fault, the ~160 Ma accretionary plutons are truncated by the ~150 Ma Bear Wallow accretionary fault, and the ~150 Ma accretionary plutons (and questionably the Grants Pass ~139 Ma accretionary pluton) are truncated by the ~120 Ma South Fork fault.

The Solarya Volcano-Plutonic Complex (NW Turkey): Petrography, Petrogenesis and Tectonic Implications

NASA Astrophysics Data System (ADS)

Ünal, Alp; Kamacı, Ömer; Altunkaynak, Şafak

2014-05-01

The post collisional magmatic activity produced several volcano-plutonic complexes in NW Anatolia (Turkey) during the late Oligocene- Middle Miocene. One of the major volcano-plutonic complexes, the Solarya volcano-plutonic complex is remarkable for its coeval and cogenetic plutonic (Solarya pluton), hypabysal and volcanic rocks of Early Miocene (24-21 Ma) age. Solarya pluton is an epizonal pluton which discordantly intruded into metamorphic and nonmetamorphic basement rocks of Triassic age. It is a N-S trending magmatic body covering an area of 220 km2,approximatelly 20 km in length and 10 km in width. Based on the field and petrographic studies, three main rock groups distinguished in Solarya pluton; K-feldspar megacrystalline granodiorite, microgranite-granodiorite and haplogranite. Porphyritic and graphic-granophyric textures are common in these three rock groups. Pluton contains magmatic enclaves and syn-plutonic dykes of dioritic composition. Hypabyssal rocks are represented by porphyritic microdiorite and porphyritic quartz-diorite. They form porphyry plugs, sheet inrusions and dykes around the pluton. Porphyrites have microcrystalline-cryptocrystalline groundmass displaying micrographic and granophyric textures. Petrographically similar to the hypabyssal rocks, volcanic rocks are formed from andesitic and dasitic lavas and pyroclastic rocks. Plutonic, hypabyssal and volcanic rocks of Solarya volcano-plutonic complex show similar major-trace element and Sr-Nd-Pb isotopic compositions, indicating common magmatic evolution and multicomponent melt sources including mantle and crustal components. They are mainly metaluminous, medium to high-K calc alkaline rocks and display enrichment in LILE and depletion in Nb, Ta, P and Ti. They have initial 87Sr/86Sr values of 0.70701- 0.70818 and 143Nd/144Nd values of 0.51241-0.51250. These geochemical characteristics and isotopic signatures are considered to reflect the composition of the magmas derived from a metasomatized lithospheric mantle beneath NW Anatolia and from the overlying crust. Compositional variations in Solarya volcano-plutonic complex are interpreted as a result of AFC. Convective removal or partial delamination of the base of mantle lithosphere and asthenospheric upwelling can be considered as possible mechanisms to provide melting of subcontinental lithospheric mantle metasomatized by earlier subduction, resulting in post collisional magmatic activity in NW Anatolia and the adjacent regions.

Late-stage sinking of plutons

USGS Publications Warehouse

Glazner, A.F.; Miller, D.M.

1997-01-01

Many granodiorite to diorite plutons in the Great Basin of western North America are surrounded by rim monoclines or anticlines that suggest relative downward movement of the plutons while wall rocks were hot and ductile. We propose that such plutons rise to a level of approximately neutral buoyancy and then founder as their densities increase ??? 40% during crystallization. Late-stage sinking of intermediate to mafic plutons should be common when wall rocks are rich in weak, low-density minerals such as quartz and calcite. Structures related to sinking will overprint those related to initial pluton emplacement and may be mistaken for regional tectonic structures.

The volcanic-plutonic connection unveiled

NASA Astrophysics Data System (ADS)

Hartung, E.; Caricchi, L.; Floess, D.; Wallis, S.; Harayama, S.

2017-12-01

Are upper crustal plutons solidified magma bodies or residues from extracted and erupted liquids? This remains one of the key questions to address to understand the construction and eruption of upper crustal magmatic systems. We have investigated the Takidani Pluton and contemporaneous volcanic deposits (Nyukawa PFD, Chayano Tuff and Ebisutoge PD) distributed around this crustal intrusion to understand whether they were sourced from this pluton. The Takidani Pluton is a good candidate because it contains petrographic and geochemical evidences for residual melt extraction, and pressure quenching associated with eruptive activity (Hartung et al., 2017). We analysed major and trace element concentrations of 18 plagioclase phenocrysts (core to rim) from the Takidani Pluton and Nyukawa-Chayano-Ebisutoge eruptions. Major elements were first analysed using an electron microprobe and trace elements were subsequently determined by laser ablation inductively coupled mass spectrometry in the same spot. Plagioclase chemistry shows that the Chayano and Ebisutoge rhyolitic deposits are not petrogenetically related to either the Takidani Pluton or the Nyukawa PFD. However, plagioclase of the Nyukawa PDF and the Takidani Pluton show indistinguishable REE patterns suggesting a common source domain for plagioclase from the two units. Ebisutoge plagioclase grains commonly contain xenocrystic cores that have major and trace element compositions comparable to the plagioclase grains observed in the Takidani Pluton and Nyukawa PFD. Our data show that the Nyukawa and Takidani plagioclase are geochemically indistinguishable, suggesting that the Takidani pluton was the magma reservoir that fed this large eruptive unit (400 km3, Oikawa, 2003). The Ebisutoge magma was not extracted directly from the pluton, but interacted with Takidani-Nyukawa when it was still molten. We have no evidence to suggest that the Takidani Pluton was the source of either the Chayano Tuff or the Ebisutoge PD.

Plutons: Simmer between 350° and 500°C for 10 million years, then serve cold (Invited)

NASA Astrophysics Data System (ADS)

Coleman, D. S.; Davis, J.

2009-12-01

The growing recognition that continental plutons are assembled incrementally over millions of years requires reexamination of the thermal histories of intrusive rocks. With the exception of the suggestion that pluton magma chambers can be revitalized by mafic input at their deepest structural levels, most aspects of modern pluton petrology are built on the underlying assumption that silicic plutons intrude as discrete thermal packages that undergo subsequent monotonic decay back to a steady-state geothermal gradient. The recognition that homogeneous silicic plutons are constructed over timescales too great to be single events necessitates rethinking pluton intrusion mechanisms, textures, thermochronology, chemical evolution and links to volcanic rocks. Three-dimensional thermal modeling of sheeted (horizontal and vertical) incremental pluton assembly (using HEAT3D by Wohletz, 2007) yields several results that are largely independent of intrusive geometry and may help understand bothersome field and laboratory results from plutonic rocks. 1) All increments cool quickly below hornblende closure temperature. However, late increments are emplaced into walls warmed by earlier increments, and they cycle between hornblende and biotite closure temperatures, a range in which fluid-rich melts are likely to be present. These conditions persist until the increments are far from the region of new magma flux, or the addition of increments stops. These observations are supported by Ar thermochronology and may explain why heterogeneous early marginal intrusive phases often grade into younger homogeneous interior map units. 2) Early increments become the contact metamorphic wall rocks of later increments. This observation suggests that much of the contact metamorphism associated with a given volume of plutonic rock is “lost” via textural modification of early increments during intrusion of later increments. Johnson and Glazner (CMP, in press) argue that mappable variations in pluton texture can result from textural modification during thermal cycling associated with incremental assembly. 3) The thermal structure of the model pluton evolves toward roughly spheroidal isotherms even though the pluton is assembled from thin tabular sheets. The zone of melt-bearing rock and the shape of intrapluton contact metamorphic isograds bear little resemblance to the increments from which the pluton was built. Consequently, pluton contacts mapped by variations in texture that reflect the thermal cycling inherent to incremental assembly will inevitably be “blob” or diapir-like, but will yield little insight into magma intrusion geometry. 4) Although models yield large regions of melt-bearing rock, the melt fraction is low and the melt-bearing volume at any time is small compared to the total volume of the pluton. This observation raises doubts about the connections between zoned silicic plutons and large ignimbrite eruptions.

Uranium-Lead Zircon Ages and Sr, Nd, and Pb Isotope Geochemistry of Selected Plutonic Rocks from Western Idaho

USGS Publications Warehouse

Unruh, Daniel M.; Lund, Karen; Kuntz, Mel A.; Snee, Lawrence W.

2008-01-01

Across the Salmon River suture in western Idaho, where allochthonous Permian to Cretaceous oceanic rocks are juxtaposed against Proterozoic North American rocks, a wide variety of plutonic rocks are exposed. Available data indicate much variation in composition, source, and structural state of these plutons. The plutonic rocks were long described as the western border zone of the Cretaceous Idaho batholith but limited pre-existing age data indicate more complicated origins. Because the affinity and age of the plutonic rocks cannot be reliably determined from field relations, TIMS U-Pb dating in conjunction with Sr, Nd, and Pb isotopic studies of selected plutons across the suture in western Idaho were undertaken. The data indicate three general groups of plutons including (1) those that intruded the island arc terranes during the Triassic and Jurassic, those that intruded near the western edge of oceanic rocks along the suture in the Early Cretaceous, and the plutons of the Idaho batholith that intruded Proterozoic North American rocks in the Late Cretaceous. Plutons that intruded Proterozoic North American rocks commonly include xenocrystic zircons and in several cases, ages could not be determined. The least radiogenic Sr and most radiogenic Nd are found among the Blue Mountains superterrane island arc samples. Suture-zone plutons have isotopic characteristics that span the range between Idaho batholith and island arc samples but mostly follow island arc signatures. Plutons of the Idaho batholith have the most radiogenic initial Pb and Sr ratios and the least radiogenic Nd of the samples analyzed.

Multiscale magmatic cyclicity, duration of pluton construction, and the paradoxical relationship between tectonism and plutonism in continental arcs

NASA Astrophysics Data System (ADS)

de Saint Blanquat, Michel; Horsman, Eric; Habert, Guillaume; Morgan, Sven; Vanderhaeghe, Olivier; Law, Richard; Tikoff, Basil

2011-03-01

The close relationship between crustal magmatism, an expression of heat dissipation, and tectonics, an expression of stress dissipation, leads to the question of their mutual relationships. Indeed, the low viscosity of magmas and the large viscosity contrast between magmas and surrounding rocks favor strain localization in magmas, and then possible "magmatic" initiation of structures at a wide range of scales. However, new data about 3-d pluton shape and duration of pluton construction perturb this simple geological image, and indicate some independence between magmatism and tectonics. In some cases we observe a direct genetic link and strong arguments for physical interactions between magmas and tectonics. In other cases, we observe an absence of these interactions and it is unclear how magma transfer and emplacement are related to lithospheric-plate dynamics. A simple explanation of this complexity follows directly from the pulsed, incremental assembly of plutons and its spatial and temporal characteristics. The size of each pluton is related to a magmatic pulsation at a particular time scale, and each of these coupled time/space scales is related to a specific process: in small plutons, we can observe the incremental process, the building block of plutons; in larger plutons, the incremental process is lost, and the pulsation, which consists of a cycle of injections at different timescales, must be related to the composition and thermal regime of the source region, itself driving magmatic processes (melting, segregation, and transfer) that interact with tectonic boundary conditions. The dynamics of pulsed magmatism observed in plutonic systems is then a proxy for deep lithospheric and magmatic processes. From our data and a review of published work, we find a positive corelation between volume and duration of pluton construction. The larger a pluton, the longer its construction time. Large/fast or small/slow plutons have not been identified to date. One consequence of this observation is that plutonic magmatic fluxes seem to be comparable from one geodynamic setting to another and also over various geologic time spans. A second consequence of this correlation is that small plutons, which are constructed in a geologically short length of time, commonly record little about tectonic conditions, and result only from the interference between magma dynamics and the local geologic setting. The fast rate of magma transfer in the crust (on the order of cm/s) relative to tectonic rates (on the order of cm/yr) explain why the incremental process of pluton construction is independent of - but not insensitive to - the tectonic setting. However, in large plutonic bodies, which correspond to longer duration magmatic events, regional deformation has time to interact with the growing pluton and can be recorded within the pluton-wall rock structure. Magma transfer operates at a very short timescale (comparable to volcanic timescales), which can be sustained over variable periods, depending on the fertility of the magma source region and its ability to feed the system. The fast operation of magmatic processes relative to crustal tectonic processes ensures that the former control the system from below.

A Two-Stage Model for Origin of Al-rich Crustal Xenoliths in Miocene Andesite, Diablo Range, West-Central California

NASA Astrophysics Data System (ADS)

Metzger, E. P.; Ernst, W. G.

2003-12-01

Miocene ( ˜ 8-10.5 Ma) andesite exposed as small plugs and dikes in the Diablo Range of west-central California encloses scattered xenoliths with diverse compositions and textures. The andesite is part of the Diablo Range Volcanics (DRV), a mafic to intermediate suite that is broadly coeval with and may be erosional remnants of the more extensive Quien Sabe Field located to the south and east. The DRV suite is inferred to be part of a northwestwardly younging sequence of volcanic fields that may be related to migration of the Mendocino Triple Junction (MTJ). Two basic categories of xenoliths are present: (1) metasedimentary rocks including quartzite, biotite schist, garnet-clinopyroxene gneiss, and distinctive sillimanite-corundum rocks; and (2) gabbroic and dioritic rocks exhibiting plutonic textures. Preliminary analysis has focused on aluminous xenoliths in which blocky porphyroblasts consisting of intergrown plagioclase, corundum, and hercynite +/- sillimanite +/- alkali feldspar up to ˜ 2 cm in length are surrounded by a very fine-grained granoblastic matrix of plagioclase, orthopyroxene, and hercynite +/- biotite +/- alkali feldspar +/- minor quartz. Glass is present both within the inclusions and in the surrounding matrix. The square to elongate outlines of the plagioclase-corundum inclusions suggest that they are pseudomorphic after andalusite. The corundum-bearing xenoliths are interpreted as the products of two stages of high T-low P metamorphism. The first event involved mid-crustal metamorphism (reflecting cessation of outboard subduction/refrigeration?) to produce andalusite-bearing hornfels; other phases probably included K-feldspar, Na-plagioclase, muscovite, biotite, and quartz. The second stage of recrystallization took place when the previously metamorphosed wall rock was incorporated in andesitic magma, possibly during passage of the MTJ. In response to heating by the magma, andalusite was replaced by corundum, plagioclase +/- sillimanite, muscovite and quartz broke down to produce more K-feldspar and sillimanite, and most of the biotite decomposed, forming abundant hercynite.

Tube manufacturing and characterization of oxide dispersion strengthened ferritic steels

NASA Astrophysics Data System (ADS)

Ukai, Shigeharu; Mizuta, Shunji; Yoshitake, Tunemitsu; Okuda, Takanari; Fujiwara, Masayuki; Hagi, Shigeki; Kobayashi, Toshimi

2000-12-01

Oxide dispersion strengthened (ODS) ferritic steels have an advantage in radiation resistance and superior creep rupture strength at elevated temperature due to finely distributed Y2O3 particles in the ferritic matrix. Using a basic composition of low activation ferritic steel (Fe-12Cr-2W-0.05C), cladding tube manufacturing by means of pilger mill rolling and subsequent recrystallization heat-treatment was conducted while varying titanium and yttria contents. The recrystallization heat-treatment, to soften the tubes hardened due to cold-rolling and to subsequently improve the degraded mechanical properties, was demonstrated to be effective in the course of tube manufacturing. For a titanium content of 0.3 wt% and yttria of 0.25 wt%, improvement of the creep rupture strength can be attained for the manufactured cladding tubes. The ductility is also adequately maintained.

Fault-controlled pluton emplacement in the Sevier fold-and-thrust belt of southwest Montana, USA

NASA Astrophysics Data System (ADS)

Kalakay, Thomas J.; John, Barbara E.; Lageson, David R.

2001-06-01

Problems associated with syncompressional pluton emplacement center on the need to make room for magma in environments where crustal shortening, not extension, occurs on a regional scale. New structural data from the Pioneer and Boulder batholiths of southwest Montana, USA, suggest emplacement at the top of frontal thrust ramps as composite tabular bodies at crustal depths between 1 and 10 km. Frontal thrust facilitated pluton emplacement was accommodated by: (1) a magma feeder zone created along the ramp interface; (2) providing 'releasing steps' at ramp tops that serve as initial points of emplacement and subsequent pluton growth; and (3) localizing antithetic back-thrusts that assist in pluton ascent. A model of magma emplacement is proposed that involves these elements. This model for syntectonic ramp-top emplacement of plutons helps explain how space is made for plutons within fold-and-thrust belts.

The case for simultaneous deformation, metamorphism and plutonism: an example from Proterozoic rocks in central Arizona

NASA Astrophysics Data System (ADS)

Karlstrom, K. E.; Williams, M. L.

1995-01-01

The syntectonic 1.70 Ga Crazy Basin Monzogranite provides an example of the complex spatial and temporal interactions between metamorphism, deformation, and plutonism. Synchronous plutonism and deformation is indicated by syn-shortening dikes, sills, and veins; parallel magmatic and solid state fabrics; fabrics in xenoliths; and a foliation triple point. Synchronous plutonism and metamorphism is indicated by a systematic increase from 400 °C to 630 °C towards the pluton at a constant pressure of 300 MPa (3 kb). Temperatures are consistent with a conductive cooling model in which a 700 °C pluton was emplaced into country rocks undergoing greenschist facies regional metamorphism. Synchronous deformation and metamorphism is indicated by porphyroblast inclusion geometries that document the synmetamorphic development of the S2 cleavage. The pluton was emplaced adjacent to the Shylock shear zone during progressive shortening. Emplacement of granite as NE-trending sheets was facilitated by temporal partitioning of transpressional convergence into strike-slip and dip-slip components. At the scale of the pluton's aureole and on the relatively rapid time scale of 10 3-10 6 y, regional deformation and metamorphism were punctuated by thermal softening and increased diffusion rates. Data suggests that accretion of Proterozoic arcs in Arizona involved diachronous pluton-enhanced deformation and associated high temperature-low pressure regional metamorphism.

Map showing the distribution and characteristics of plutonic rocks in the Tonopah 1 degree by 2 degrees Quadrangle, central Nevada

USGS Publications Warehouse

John, D.A.

1987-01-01

The accompanying table includes the name (if any) of the pluton and its location, the age of the pluton (either a radiometric age or an age inferred from field relations), modal composition, texture, mineralogy, hydrothermal alteration and mineralization related to the pluton, the source of mapping shown on this map, and published references on the pluton. Radiometric ages are either published K-Ar and fission track ages or new whole-rock Rb-Sr ages determined by A. C. Robinson on samples collected either for this study or as part of regional Sr-isotope studies by R.W. Kistler and A.C. Robinson. K-Ar ages published prior to 1977 are corrected using the new I.U.C.S. constants (Steiger and Jager, 1977). Muscovite alteration ages are reported for several plutons and represent minimum ages for emplacement of these plutons. Compositional classification follows the T. J. G.S. system (“Streckeisen, 1976) and is based either on modal analyses of slabs or estimates from hand specimens. All modes, unless otherwise noted, were measured in this study. The number of modes determined is shown in parentheses, and the range in volume percent of major minerals is given. Where no modal data are available, the color index (percentage of mafic minerals) and major mafic minerals are given for most plutons. Data tabulated on hydrothermal alteration and mineralization related to plutons are based on observations made during field studies for this project. Clear genetic relation between granitic plutonism and several mineral deposits previously attributed to granitic plutonism were not substantiated, and these inconsistencies are noted in the table.

Episodic intrusion, internal differentiation, and hydrothermal alteration of the miocene tatoosh intrusive suite south of Mount Rainier, Washington

USGS Publications Warehouse

du Bray, E.A.; Bacon, C.R.; John, D.A.; Wooden, J.L.; Mazdab, F.K.

2011-01-01

The Miocene Tatoosh intrusive suite south of Mount Rainier is composed of three broadly granodioritic plutons that are manifestations of ancestral Cascades arc magmatism. Tatoosh intrusive suite plutons have individually diagnostic characteristics, including texture, mineralogy, and geochemistry, and apparently lack internal contacts. New ion-microprobe U-Pb zircon ages indicate crystallization of the Stevens pluton ca. 19.2 Ma, Reflection-Pyramid pluton ca. 18.5 Ma, and Nisqually pluton ca. 17.5 Ma. The Stevens pluton includes rare, statistically distinct ca. 20.1 Ma zircon antecrysts. Wide-ranging zircon rare earth element (REE), Hf, U, and Th concentrations suggest late crystallization from variably evolved residual liquids. Zircon Eu/Eu*-Hf covariation is distinct for each of the Reflection-Pyramid, Nisqually, and Stevens plutons. Although most Tatoosh intrusive suite rocks have been affected by weak hydrothermal alteration, and sparse mineralized veins cut some of these rocks, significant base or precious metal mineralization is absent. At the time of shallow emplacement, each of these magma bodies was largely homogeneous in bulk composition and petrographic features, but, prior to final solidification, each of the Tatoosh intrusive suite plutons developed internal compositional variation. Geochemical and petrographic trends within each pluton are most consistent with differential loss of residual melt, possibly represented by late aplite dikes or erupted as rhyolite, from crystal-rich magma. Crystal-rich magma that formed each pluton evidently accumulated in reservoirs below the present level of exposure and then intruded to a shallow depth. Assembled by episodic intrusion, the Tatoosh intrusive suite may be representative of midsized composite plutonic complexes beneath arc volcanoes. ?? 2011 Geological Society of America.

Wall Rock Assimilation and Magma Migration in the Sierra Nevada Batholith: A Study of the Courtright Intrusive Zone, Central California

NASA Astrophysics Data System (ADS)

Torrez, G.; Putirka, K. D.

2010-12-01

The Sierra Nevada Batholith is composed of various plutons that interact with each other, and with pre- and syn-batholith metamorphic rocks. In the central part of the Sierra Nevada Batholith, at Courtright Reservoir in California, the younger Mt. Givens Pluton (87-93 Ma; McNulty et al., 2000) intrudes the Dinkey pluton (103 Ma; Bateman et al., 1964), and metasediments (a metamorphic screen) that, in places, separate the two plutons. This Courtright Reservoir Intrusive zone, as termed by Bateman et al. (1964), provides an ideal setting to examine the dynamics of intrusion and assimilation. Whole rock major and trace element compositions of the plutons, their mafic enclaves, and the metasediments, show that all such samples, from both plutons, fall on a single mixing trend. We thus infer that magmas parental to both plutons were roughly similar in composition, and assimilated significant amounts of the same, or very similar metasedimentary wall rocks. We also examined changes in whole rock compositions within the Mt. Givens pluton, as a function of distance from the two rock units with which it is now in contact (the metasediments, and the Dinkey Creek). In the vicinity of the contact between are an abundance of enclaves that are rounded, and appear to have been transported in vertical pipes. Whole rock analysis of the host granitoid material that surrounds these enclaves is clearly more mafic than the granitoid magmas from interior parts of the pluton. These whole rock compositions indicate that the pluton becomes more homogenous moving away from the contact, with a compositional decay occurring over a span of about 50-100 m. There are at least two possible interpretations. The compositional decay may represent a diffusive exchange of mass between an early crystallizing marginal phase of the pluton and the pluton interior. Another (not mutually incompatible) possibility is that the mafic margins represent pipes or tubes (Paterson, 2010), related to some convective instability at the margins of the pluton.

Investigating Magmatic Processes in the Lower Levels of Mantle-derived Magmatic Systems: The Age & Emplacement of the Kunene Anorthosite Complex (SW Angola)

NASA Astrophysics Data System (ADS)

Hayes, B.; Bybee, G. M.; Owen-Smith, T.; Lehmann, J.; Brower, A. M.; Ashwal, L. D.; Hill, C. M.

2017-12-01

Our understanding of mantle-derived magmatic systems has shifted from a notion of upper crustal, melt-dominated magma chambers that feed short-lived volcanic eruptions, to a view of more long-lived trans-crustal, mush-dominated systems. Proterozoic massif-type anorthosite systems are voluminous, plagioclase-dominated plutonic suites with ubiquitous intermediate compositions (An 50 ± 10) that represent mantle-derived magmas initially ponded at Moho depths and crystallized polybarically until emplacement at mid-crustal levels. Thus, these systems provide unique insight into magma storage and processing in the lower reaches of the magma mush column, where such interpretation has previously relied on cumulate xenoliths in lavas, geophysical data and experimental/numerical modeling. We present new CA-ID-TIMS ages and a series of detailed field observations from the largest Proterozoic anorthosite massif on Earth, the Kunene Anorthosite Complex (KAC) of SW Angola. Field structures indicate that (i) the bulk of the material was emplaced in the form of crystal mushes, as both plutons and sheet-like intrusions; (ii) prolonged magmatism led to cumulate disaggregation (block structure development) and remobilization, producing considerable textural heterogeneity; (iii) crystal-rich magmatic flow induced localized recrystallization and the development of protoclastic (mortar) textures; and (iv) late residual melts were able to migrate locally prior to complete solidification. Dating of pegmatitic pods entrained from cumulate zones at the base of the crust (1500 ± 13 Ma) and their host anorthosites (1375-1438 Ma) reveals time periods in the range of 60-120 Myr between the earliest products of the system and the final mushes emplaced at higher crustal levels. Therefore, the KAC represents a complex, mushy magmatic system that developed over a long period of time. Not only do these observations help in refining our understanding of Proterozoic anorthosite petrogenesis, they also allow us to place constraints on the types of magmatic processes that operate in the lower levels of other trans-crustal magmatic systems.

Immiscibility of Fluid Phases at Magmatic-hydrothermal Transition: Formation of Various PGE-sulfide Mineralization for Layered Basic Intrusions

NASA Astrophysics Data System (ADS)

Zhitova, L.; Borisenko, A.; Morgunov, K.; Zhukova, I.

2007-12-01

Fluid inclusions in quartz of the Merensky Reef (Bushveld Complex, South Africa) and the Chineisky Pluton (Transbaikal Region, Russia) were studied using cryometry, microthermometry, Raman-spectroscopy, LA ICP- MS, scanning electronic microscopy, gas-chromatography and isotopic methods. This allowed us to document some examples of fluid phase separation resulting in formation of different types of PGE-sulfide mineralization for layered basic intrusions. The results obtained show at least three generations of fluid separated from boiling residual alumosilicate intercumulus liquid of the Merensky Reef. The earliest fluid phase composed of homogenous high-dense methane and nitrogen gas mixture was identified in primary gas and co-existing anomalous fluid inclusions from symplectitic quartz. The next generation, heterophase fluid, composed of brines containing a free low-dense (mostly of carbon dioxide) gas phase, was observed in primary multiphase and coexisting gas-rich inclusions of miarolitic quartz crystals. The latest generation was also a heterophase fluid (low salinity water-salt solution and free low-dense methane gas phase) found in primary water-salt and syngenetic gas inclusions from peripheral zones of miarolitic quartz crystals. For the Chineisky Pluton reduced endocontact magmatogene fluids changed to oxidized low salinity hydrothermal fluids in exocontact zone. This resulted in formation of sulfide-PGE enrichment marginal zones of intrusion. The results obtained give us a possibility to suggest that: 1) Fluid phase separation is a typical feature of magmatogene fluids for layered basic intrusions. 2) Reduced fluids can extract and transport substantial PGE and sulfide concentrations. 3) Oxidation of reduced fluids is one of the most important geochemical barriers causing abundant PGE minerals and sulfides precipitation. This in turn results in both formation of PGE reefs or enriched contact zones of layered basic intrusions. This work was supported by the Ministry for Russian Science and Education, Grant DSP.2.1.1.702, by RFBR Grants ## 07-05-00685, 07-05-00803, Grant VMTK-2007 IGM SB RAS.

Clumped isotope thermometry of calcite and dolomite in a contact metamorphic environment

NASA Astrophysics Data System (ADS)

Lloyd, Max K.; Eiler, John M.; Nabelek, Peter I.

2017-01-01

Clumped isotope compositions of slowly-cooled calcite and dolomite marbles record apparent equilibrium temperatures of roughly 150-200 °C and 300-350 °C, respectively. Because clumped isotope compositions are sensitive to the details of T-t path within these intervals, measurements of the Δ47 values of coexisting calcite and dolomite can place new constraints on thermal history of low-grade metamorphic rocks over a large portion of the upper crust (from ∼5 to ∼15 km depth). We studied the clumped isotope geochemistry of coexisting calcite and dolomite in marbles from the Notch Peak contact metamorphic aureole, Utah. Here, flat-lying limestones were intruded by a pluton, producing a regular, zoned metamorphic aureole. Calcite Δ47 temperatures are uniform, 156 ± 12 °C (2σ s.e.), across rocks varying from high-grade marbles that exceeded 500 °C to nominally unmetamorphosed limestones >5 km from the intrusion. This result appears to require that the temperature far from the pluton was close to this value; an ambient temperature just 20 °C lower would not have permitted substantial re-equilibration, and should have preserved depositional or early diagenetic Δ47 values several km from the pluton. Combining this result with depth constraints from overlying strata suggests the country rock here had an average regional geotherm of 22.3-27.4 °C/km from the late Jurassic Period until at least the middle Paleogene Period. Dolomite Δ47 in all samples above the talc + tremolite-in isograd record apparent equilibrium temperatures of 328-12+13 °C (1σ s.e.), consistent with the apparent equilibrium blocking temperature we expect for cooling from peak metamorphic conditions. At greater distances, dolomite Δ47 records temperatures of peak (anchi)metamorphism or pre-metamorphic diagenetic conditions. The interface between these domains is the location of the 330 °C isotherm associated with intrusion. Multiple-phase clumped isotope measurements are complemented by bulk δ13C and δ18O dolomite-calcite thermometry. These isotopic exchange thermometers are largely consistent with peak temperatures in all samples within 4 km of the contact, indicating that metamorphic recrystallization can occur even in samples too low-grade to produce growth of conventional metamorphic index minerals (i.e., talc and tremolite). Altogether, this work demonstrates the potential of these methods to quantify the conditions of metamorphism at sub-greenschist facies.

U-Pb dating and emplacement history of granitoid plutons in the northern Sanandaj-Sirjan Zone, Iran

NASA Astrophysics Data System (ADS)

Mahmoudi, Shahryar; Corfu, Fernando; Masoudi, Fariborz; Mehrabi, Behzad; Mohajjel, Mohammad

2011-05-01

The Sanandaj-Sirjan Zone (SSZ), which runs parallel to the Zagros fold and thrust belt of Iran, underwent a multistage evolution starting with Neotethys initiation, its subsequent subduction below the Iranian continental crust, and eventual closure during convergence of Arabia towards central Iran. Plutonic complexes are well developed in the northern part of the SSZ and we have dated a number of them by ID-TIMS U-Pb on zircon. The new data record the following events: a Mid Jurassic period that formed the Boroujerd Plutonic Complex (169 Ma), the Astaneh Pluton (168 Ma) and the Alvand Pluton (165 Ma); Late Jurassic emplacement of the Gorveh Pluton (157-149 Ma); Mid Cretaceous (109 Ma) formation of a I-type phase in the Hasan Salary Pluton near Saqqez, followed by Early Paleocene (60 Ma) intrusion of A-type granite in the same pluton; and the youngest intrusive event recorded so far in the SSZ with the intrusion of granite in the Gosheh-Tavandasht Complex near Boroujerd at 34.9 Ma. These different events reflect specific stages of subduction-related magmatism prior to the eventual Miocene collision between the two continental blocks.

Eastgate Geothermal Borehole Project: Predicting Fracture Geometry at Depth

NASA Astrophysics Data System (ADS)

Beattie, Stewart; Shipton, Zoe K.; Johnson, Gareth; Younger, Paul L.

2013-04-01

In 2004 an exploratory borehole at the Eastgate Geothermal Project encountered part of a vein system within the Weardale granite. At 995m depth brine was at a temperature of around 46°C. The geothermal source is likely related to the Slitt vein system that cuts through c.270m of carboniferous sedimentary strata overlying the Weardale granite pluton. The economic success of the Eastgate geothermal project is dependent on exploiting this vein system in an otherwise low permeability and low geothermal gradient setting. The Slitt vein system has been extensively mined. Mining records show the attitude of the vein through the sedimentary strata, however, the trajectory and magnitude of the vein within the pluton itself is unknown. Using mine records, geological maps and published literature, models of the vein system up to the depth of the pluton were created. To extend this model into the pluton itself requires some knowledge regarding the geometry and evolution of the pluton and subsequently properties of vein systems and other fracture populations at depth. The properties of fracture and vein populations within the granite will depend on forming processes including; cooling and contraction of the pluton, deformation of host rocks during pluton emplacement, and post emplacement deformation. Using published literature and gravity data a 3D model of the geometry of the pluton was constructed. Shape analysis of the pluton allows an estimation of the orientation of fractures within the pluton. Further modelling of the structural evolution of the pluton will enable kinematic or geomechanical strain associated with the structural evolution to be captured and subsequently used as a proxy for modelling both intensity and orientation of fracturing within the pluton. The successful prediction of areas of high fracture intensity and thus increased permeability is critical to the development of potential geothermal resources in low geothermal gradient and low permeability settings. This is also important in EGS settings where stimulation will often re-activate existing fracture networks. The development at the Eastgate Geothermal Borehole project provides an opportunity to model fracture and vein populations within an intrusive body and validate those model predictions with production data from the site.

Age and intrusive relations of the Lamarck granodiorite and associated mafic plutons, Sierra Nevada, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joye, J.L.; Bachl, C.A.; Miller, J.S.

The compositionally zoned Late Cretaceous Lamarck granodiorite, west of Bishop, hosts numerous mafic intrusions ranging from hornblende gabbro to mafic granodiorite. Frost and Mahood (1987) suggested from field relations that the Lamarck and the associated mafic plutons were co-intrusive. Contact relations between the Lamarck host and the mafic intrusions are variable (sharp to diffuse) and in places suggest commingling. In order to constrain the intrusive relationships between the Lamarck and its associated mafic plutons, the authors have analyzed feldspars from the Mt. Gilbert pluton and the Lamarck granodiorite to see if feldspar compositions in the Mt. Gilbert overlap those inmore » the Lamarck host and determined U-Pb zircon ages for the Mt. Gilbert and Lake Sabrina plutons to see if they have the same age as the Lamarck granodiorite. Feldspars from the Lamarck granodiorite are normally zoned and range compositionally from An[sub 38--32]; those in the Mt. Gilbert diorite are also normally zoned but range compositionally from An[sub 49--41] and do not overlap the Lamarck host. Four to five zircon fractions from each pluton were handpicked and dated using U-Pb methods. The Mt. Gilbert mafic diorite has a concordant age of 92.5 Ma and the Lake Sabrina diorite has a concordant age of 91.5 Ma. Ages for the two plutons overlap within error, but multiple fractions from each suggest that the Lake Sabrina pluton is slightly younger than the Mt. Gilbert pluton. These data and field relationships indicate: (1) plagioclase phenocrysts in the Mt. Gilbert pluton were not derived from the Lamarck granodiorite despite their textural similarity; but (2) the Lamarck granodiorite and its associated mafic plutons are co-intrusive as supported by the close agreement of the ages with the crystallization age obtained by Stern and others for the Lamarck granodiorite.« less

Hematite-Ilmenite with Magnetite from the Ecstall Pluton, British Columbia: Single Crystal Magnetic Experiments

NASA Astrophysics Data System (ADS)

Scott, G. R.; Brownlee, S. J.; Feinberg, J. M.; Renne, P. R.

2008-12-01

Rocks provide a compound paleomagnetic signal from mixtures of various iron minerals with different grain sizes and magnetic stabilities. To unravel this complex signal, specific mineral phases with stable remanence can be individually examined as single crystals. In the case of the Ecstall Pluton (~91 Ma), intra-pluton discordance of paleomagnetic directions may be the result of post-crystallization deformation, or mineralogical changes caused by re-heating from the adjacent Quottoon Pluton (~52 Ma). In order to distinguish between these two hypotheses we conducted rock magnetic experiments on single crystals of finely-exsolved hematite-ilmenite along a transect approaching the Quottoon Pluton. Reflected light, and SEM observations show grains of hematite and ilmenite as the dominant Fe-oxide throughout the Ecstall. Nearest the Quottoon Pluton, the hematite-ilmenite grains exhibit the classic rutile blitz texture. The lamellar microstructure observed in the hematite-ilmenite grains, as well as the rutile blitz texture are linked to the thermal history of the Ecstall Pluton, and have important effects on the magnetic properties of these grains (i.e. lamellar magnetism). Our results include the magnetic unmixing of isothermal remanence magnetization (IRM) acquisition, First Order Reversal Curve (FORC) diagrams, temperature vs. remanence experiments (MPMS), and TEM studies. These data provide a spatially resolved record of rock magnetic variations across the Ecstall Pluton, showing evidence of thermally activated reduction of hematite to magnetite in samples within 13 km of the Quottoon Pluton. TEM analysis shows the magnetite is present as 20-50 nm-sized particles within hematite. This mineralogic change may be responsible for the variations in paleomagnetic directions across the Ecstall Pluton, and clear evidence for this reaction cannot be found by traditional rock characterization techniques, illustrating the need to couple detailed rock magnetic, paleomagnetic, and mineralogic analyses.

Syn-extensional emplacement of the 1. 42 Ga Sandia Granite, N. M

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karlstrom, K.E.; Kirby, E.; Andronicos, C.

1993-02-01

The 1.42 Ga Sandia pluton is one of a suite of Middle Proterozoic granitoid intrusions exposed in northern New Mexico. It crops out over 420 km[sup 2] in the Sandia Mountains, just east of Albuquerque. Recent structural work indicates that the pluton was emplaced syntectonically with respect to a transtensional ductile shear zone on its southeastern side. The shear zone is 1-2 km wide, dips 60[degree] NW under the pluton, and is thus inferred to be a deformed base or lower side of the pluton. From NW to SE, a transect across the zone consists of (1) essentially undeformed, locallymore » flow-foliated Sandia pluton (megacrystic monzogranite); (2) mylonitic, augen orthogneiss that is clearly sheared Sandia pluton; its matrix is depleted in quartz and K-feldspar and enriched in biotite relative to the undeformed pluton; (3) Cibola granite - a 1 km wide zone of fine to coarse grained, equigranular, leucocratic granite; (4) the Tijeras Fault - a Phanerozoic brittle fault; (5) the Tijeras Greenstone - unsheared amphibolite and interlayered pelitic schist and quartzite. Field and microstructural relationships indicate that pluton crystallization was synchronous with shear zone movements. Shear zone movement is interpreted to have punctuated segregation of evolved melts during fractional crystallization of the magma. Geochemical data show linear trends in major and trace elements, with compositional gaps between the main pluton and leucocratic phases. Strain studies suggest that the biotite-rich mylonitic augen orthogneiss records significant volume loss in the matrix. Melts presumably were drawn down pressure gradients into the active shear zone after the main unit was 50--70% crystallized. Further work is required to constrain whether extension was related to regional deformation or only to pluton emplacement.« less

Structure of the Castillo granite, Southwest Spain: Variscan deformation of a late Cadomian pluton

NASA Astrophysics Data System (ADS)

EguíLuz, L.; Apraiz, A.; ÁBalos, B.

1999-12-01

A geometrical reconstruction of the 500 Ma old Castillo granite pluton (SW Iberia) is completed on the basis of structural and geophysical (rock magnetism) techniques. The pluton is intrusive into latest Proterozoic-earliest Cambrian metasediments and conforms a tabular intrusion 6 km in diameter and 1.7 km thick that was emplaced at a depth of 10 km. Its magnetic fabric reveals that the strike of moderately to steeply dipping magmatic flow planes forms a high angle to the regional tectonic trends. Magnetic foliations and associated moderately to gently plunging magnetic lineations represent magmatic flow planes and directions. The internal anisotropy of the granite together with the structure shown by the country rocks attest the lateral propagation of the pluton and its latter inflation. The pluton's root zone would correspond to a likely thin, subvertical feeder structure initiated near the orientation of regional σ1 at the time of emplacement. During the Variscan orogeny the pluton was tilted and underwent localized brittle-ductile strain in relation to shear zone deformation in the footwall of a major ductile thrust. Tilting permits the observation and study of a vertical profile of the intrusion. Localized deformation caused superposition of tectonic zonations on the magmatic ones, a reactivation of the basal contact of the pluton, and dismemberment from its root. This and other granitoid plutons of similar age emplaced at a similar depth constrained the creation of crustal mechanical heterogeneity and anisotropy. This controlled the site of pluton emplacement, the nucleation of a major ductile thrust, and localization of deformation and tectonic displacements along the pluton margins during later orogenic reactivation.

A PCR detection method for rapid identification of Melissococcus pluton in honeybee larvae.

PubMed

Govan, V A; Brözel, V; Allsopp, M H; Davison, S

1998-05-01

Melissococcus pluton is the causative agent of European foulbrood, a disease of honeybee larvae. This bacterium is particularly difficult to isolate because of its stringent growth requirements and competition from other bacteria. PCR was used selectively to amplify specific rRNA gene sequences of M. pluton from pure culture, from crude cell lysates, and directly from infected bee larvae. The PCR primers were designed from M. pluton 16S rRNA sequence data. The PCR products were visualized by agarose gel electrophoresis and confirmed as originating from M. pluton by sequencing in both directions. Detection was highly specific, and the probes did not hybridize with DNA from other bacterial species tested. This method enabled the rapid and specific detection and identification of M. pluton from pure cultures and infected bee larvae.

A PCR Detection Method for Rapid Identification of Melissococcus pluton in Honeybee Larvae

PubMed Central

Govan, V. A.; Brözel, V.; Allsopp, M. H.; Davison, S.

1998-01-01

Melissococcus pluton is the causative agent of European foulbrood, a disease of honeybee larvae. This bacterium is particularly difficult to isolate because of its stringent growth requirements and competition from other bacteria. PCR was used selectively to amplify specific rRNA gene sequences of M. pluton from pure culture, from crude cell lysates, and directly from infected bee larvae. The PCR primers were designed from M. pluton 16S rRNA sequence data. The PCR products were visualized by agarose gel electrophoresis and confirmed as originating from M. pluton by sequencing in both directions. Detection was highly specific, and the probes did not hybridize with DNA from other bacterial species tested. This method enabled the rapid and specific detection and identification of M. pluton from pure cultures and infected bee larvae. PMID:9572987

Emplacement, rapid burial, and exhumation of 90-Ma plutons in southeastern Alaska

USGS Publications Warehouse

Himmelberg, G.R.; Haeussler, Peter J.; Brew, D.A.

2004-01-01

In southeastern Alaska, granodiorite-tonalite plutons of the Admiralty-Revillagigedo belt intruded the Jurassic-Cretaceous Gravina belt along the eastern side of the Alexander terrane around 90 Ma. These plutons postdate some deformation related to a major contractional event between the previously amalgamated Wrangellia and Alexander terranes and the previously accreted terranes of the North American margin. We studied the aureole mineral assemblages of these plutons near Petersburg, Alaska, determined pressure and temperature of equilibration, and examined structures that developed within and adjacent to these plutons. Parallelism of magmatic and submagmatic fabrics with fabrics in the country rock indicates synchroneity of pluton emplacement with regional deformation and suggests that magma transport to higher crustal levels was assisted by regional deformation. Replacement of andalusite by kyanite or sillimanite indicates crustal thickening soon after pluton emplacement. Regional structural analysis indicates the crustal thickening was accomplished by thrust burial. Thermobarometric analyses indicate the aureoles reached near-peak temperatures of 525 to 635 ??C at pressures of 570 to 630 MPa. Consideration of the rate of thermal decay of the aureoles suggests that burial was rapid and occurred at rates around 5 to 8 mm/year. Structural observations indicate there was contractional deformation before, during, and after emplacement of the 90-Ma plutons. Initial exhumation of the Admiralty-Revillagedo belt in the Petersburg area may have occurred along a thrust west of the pluton belt within the Gravina belt. ?? 2004 NRC Canada.

Interactions between plutonism and detachments during metamorphic core complex formation, Serifos Island (Cyclades, Greece)

NASA Astrophysics Data System (ADS)

Rabillard, Aurélien; Arbaret, Laurent; Jolivet, Laurent; Le Breton, Nicole; Gumiaux, Charles; Augier, Romain; Grasemann, Bernhard

2015-06-01

In order to better understand the interactions between plutonic activity and strain localization during metamorphic core complex formation, the Miocene granodioritic pluton of Serifos (Cyclades, Greece) is studied. This pluton (11.6-9.5 Ma) intruded the Cycladic Blueschists during thinning of the Aegean domain along a system of low-angle normal faults belonging to the south dipping West Cycladic Detachment System (WCDS). Based on structural fieldwork, together with microstructural observations and anisotropy of magnetic susceptibility, we recognize a continuum of deformation from magmatic to brittle conditions within the magmatic body. This succession of deformation events is kinematically compatible with the development of the WCDS. The architecture of the pluton shows a marked asymmetry resulting from its interaction with the detachments. We propose a tectonic scenario for the emplacement of Serifos pluton and its subsequent cooling during the Aegean extension: (1) A first stage corresponds to the metamorphic core complex initiation and associated southwestward shearing along the Meghàlo Livadhi detachment. (2) In the second stage, the Serifos pluton has intruded the dome at shallow crustal level, piercing through the ductile/brittle Meghàlo Livadhi detachment. Southwest directed extensional deformation was contemporaneously transferred upward in the crust along the more localized Kàvos Kiklopas detachment. (3) The third stage was marked by synmagmatic extensional deformation and strain localization at the contact between the pluton and the host rocks resulting in nucleation of narrow shear zones, which (4) continued to develop after the pluton solidification.

Composition and genesis of the Konevinsky gold deposit, Eastern Sayan, Russia

NASA Astrophysics Data System (ADS)

Damdinov, B. B.; Zhmodik, S. M.; Roshchektaev, P. A.; Damdinova, L. B.

2016-03-01

The Konevinsky gold deposit in southeast Eastern Sayan is distinguished from most known deposits in this region (Zun-Kholba, etc.) by the geological setting and composition of mineralization. To elucidate the cause of the peculiar mineralization, we have studied the composition, formation conditions, and origin of this deposit, which is related to the Ordovician granitoid pluton 445-441 Ma in age cut by intermediate and basic dikes spatially associated with metavolcanic rocks of the Devonian-Carboniferous Ilei Sequence. Four mineral assemblages are recognized: (1) quartz-pyrite-molybdenite, (2) quartz-gold-pyrite, (3) gold-polysulfide, and (4) telluride. Certain indications show that the ore was formed as a result of the superposition of two distinct mineral assemblages differing in age. The first stage dated at ~440 Ma is related to intrusions generating Cu-Mo-Au porphyry mineralization and gold-polysulfide veins. The second stage is controlled by dikes pertaining to the Devonian-Carboniferous volcanic-plutonic association. The second stage is characterized by gain of Hg and Te and formation of gold-mercury-telluride paragenesis.

Transformation of juvenile Izu-Bonin-Mariana oceanic arc into mature continental crust: An example from the Neogene Izu collision zone granitoid plutons, Central Japan

NASA Astrophysics Data System (ADS)

Saito, Satoshi; Tani, Kenichiro

2017-04-01

Granitic rocks (sensulato) are major constituents of upper continental crust. Recent reviews reveal that the average composition of Phanerozoic upper continental crust is granodioritic. Although oceanic arcs are regarded as a site producing continental crust material in an oceanic setting, intermediate to felsic igneous rocks occurring in modern oceanic arcs are dominantly tonalitic to trondhjemitic in composition and have lower incompatible element contents than the average upper continental crust. Therefore, juvenile oceanic arcs require additional processes in order to get transformed into mature continental crust enriched in incompatible elements. Neogene granitoid plutons are widely exposed in the Izu Collision Zone in central Japan, where the northern end of the Izu-Bonin-Mariana (IBM) arc (juvenile oceanic arc) has been colliding with the Honshu arc (mature island arc) since Middle Miocene. The plutons in this area are composed of various types of granitoids ranging from tonalite to trondhjemite, granodiorite, monzogranite and granite. Three main granitoid plutons are distributed in this area: Tanzawa plutonic complex, Kofu granitic complex, and Kaikomagatake granitoid pluton. Tanzawa plutonic complex is dominantly composed of tonalite and trondhjemite and characterized by low concentration of incompatible elements and shows geochemical similarity with modern juvenile oceanic arcs. In contrast, Kofu granitic complex and Kaikomagatake granitoid pluton consists mainly of granodiorite, monzogranite and granite and their incompatible element abundances are comparable to the average upper continental crust. Previous petrogenetic studies on these plutons suggested that (1) the Tanzawa plutonic complex formed by lower crustal anatexis of juvenile basaltic rocks occurring in the IBM arc, (2) the Kofu granitic complex formed by anatexis of 'hybrid lower crust' comprising of both basaltic rocks of the IBM arc and metasedimentary rocks of the Honshu arc, and (3) the Kaikomagatake granitoid pluton formed by anatexis of 'hybrid lower crust' consisting of K-rich rear-arc crust of the IBM arc and metasedimentary rocks of the Honshu arc. These studies collectively suggest that the chemical diversity within the Izu Collision Zone granitoid plutons reflects the chemical variation of basaltic sources (i.e., across-arc chemical variation in the IBM arc) as well as variable contribution of the metasedimentary component in the source region. The petrogenetic models of the Izu Collision Zone granitoid plutons suggest that collision with another mature arc/continent, hybrid lower crust formation and subsequent hybrid source anatexis are required for juvenile oceanic arcs to produce granitoid magmas with enriched compositions. The Izu Collision Zone granitoid plutons provide an exceptional example of the collision-induced transformation from a juvenile oceanic arc to the mature continental crust.

Circum-North Pacific tectonostratigraphic terrane map

USGS Publications Warehouse

Nokleberg, Warren J.; Parfenov, Leonid M.; Monger, James W.H.; Baranov, Boris B.; Byalobzhesky, Stanislav G.; Bundtzen, Thomas K.; Feeney, Tracey D.; Fujita, Kazuya; Gordey, Steven P.; Grantz, Arthur; Khanchuk, Alexander I.; Natal'in, Boris A.; Natapov, Lev M.; Norton, Ian O.; Patton, William W.; Plafker, George; Scholl, David W.; Sokolov, Sergei D.; Sosunov, Gleb M.; Stone, David B.; Tabor, Rowland W.; Tsukanov, Nickolai V.; Vallier, Tracy L.; Wakita, Koji

1994-01-01

after accretion of most terranes in the region; (2) Cenozoic and Mesozoic basinal deposits that occur within a terrane or on the craton; (3) plutonic rocks. The postaccretion igneous units are identified by age-lithologic abbreviations and by name. These overlap assemblages and basinal deposits formed mainly during sedimentation and magmatism that occurred after accretion of terranes to each other or to a continental margin. Overlap assemblages provide minimum ages on the timing of accretion of terranes. Some Cenozoic and Mesozoic overlap assemblages and basinal deposits, as well as fragments of terranes, are extensively offset by movement along postaccretion faults. In addition, in onshore areas, the map depicts major preaccretion plutonic rocks that are limited to individual terranes. and in offshore areas. the map depicts major oceanic plates,-ocean floor magnetic lineations. oceanic spreading ridges, and seamounts. The map consists of five sheets. Sheets I and 2 depict, at a scale of I :5.000.000. the tectonostratigraphic terranes. preaccretion plutonic rocks, and postaccretion Cenozoic and Mesozoic overlap sedimentary, volcanic. and plutonic assemblages, and basinal deposits for the Circum- orth Pacific including the Russian Far East, northern Hokkaido Island of Japan, Alaska. the Canadian Cordillera, part of the U.S.A. Pacific Northwest. and adjacent offshore areas. Sheet 3 provides the list of map units for Sheets I and 2. Sheet 4 is a index map showing generalized onshore terranes and overlap assemblages for onshore parts of the Circum-North Pacific at a scale of I: I 0,000,000. Sheet 4 is a guide to the more complicated onshore features depicted on Sheets I and 2. Sheet 5 is an index map showing the major geographic regions for the Circum-North Pacific. Significant differences exist between the representation of onshore and offshore geology on Sheets I and 2. These are: (I) compared to the onshore part of the map, the offshore part is depicted in a more schematic fashion because of more limited data and because the offshore terranes and early Cenozoic and older overlap assemblages generally are obscured by extensive late Cenozoic sedimentary cover that is not shown unless thicker than two kilometers; (2) marginal contacts of offshore Cenozoic and Cretaceous sedimentary basins do not match contacts of onshore Cenozoic and Cretaceous sedimentary units because offshore basins are limited to those regions with sediment thicknesses greater than two kilometers; (3) stratigraphic columns, included at the end of this explanation. are provided only for onshore terranes because the geology of offshore terranes is generally less well-known; and (4) for simplicity, the major onshore Cenozoic sedimentary basins are generally not defined and described separately because the onshore part of the map is designed to emphasize terranes and overlap volcanic assemblages that are crucial for both for tectonic and metallogenic analyses published elsewhere (Nokleberg and others, 1993, 1994a). Several key geologic sources were used in the compilation of the map. For Alaska. the basic outcrop pattern for the map is from Beikman (1980), Gehrels and Berg (1992, 1994). Barker and others ( 1994). Brew (1994), and Moli-Stalcup and others ( 1994b). The distribution of terranes is from Jones and others (1987) and Monger and Berg (1987), with modification by Grantz and other (1991 ). Worall (199 1 ), okleberg and others (1993, 1994a), the cited references, and the Alaskan co-authors of this report. For the Canadian Cordillera. the basic outcrop pattern is from Monger and Berg ( 1987), Wheeler and other (1988). and Wheeler and McFeeley ( 1991) with modifications by the Canadian authors. For the northern part of the Russian Far East. the basic outcrop pattern is from So unov (1985) with modifications by the Russian authors. For the outhern part of the Russian Far East, the basic outcrop pattern is from Krasny (1991) and Bazhanov and Oleinik ( 1986) with modification by the Russian authors. The Russian Far East part of the map is the first attempt to define and delineate terranes in that region. In their compilation. the Russian authors utilized the methodology of U.S.A. and Canadian geologists. Because this map is the first attempt to display the terranes. Cenozoic and Mesozoic overlap assemblages. basinal deposit , and plutonic belts of the Russian Far East. the Russian author will appreciate constructive sugge tions for improving the map.

Numerical modeling of forceful pluton emplacement and associated deformation at different crustal levels - instantaneous, continuous or episodic intrusion?

NASA Astrophysics Data System (ADS)

Chen, Y.; Nabelek, P. I.

2015-12-01

The Papoose Flat pluton in the White-Inyo Range, California, is one of the best examples of forceful magma emplacement at mid-crustal levels that is revealed by a highly strained aureole. A thermo-rheological 2-D model of the pluton and its aureole is proposed. We explored how the frequency of magma input, from instantaneous to continuous to the bottom of the laccolith, affects the ductile width of the aureole and the crystallinity of the pluton, which has implications for eruption of magma. We modeled these aspects at mid- and upper-crustal levels. The pluton was assumed to be 5 km thick in the middle and 13 km wide. Except for instantaneous growth, pluton was assumed to grow over 5 m.y. The aureole was assumed to have power-law rheology of quartz with dependence on H2O fugacity, which was calculated using the CORK equation (Holland & Powell, 1991) Our result shows that the bottom of the Papoose Flat pluton was emplaced at the brittle-ductile transition zone of the crust. The crustal rheology profile assisted the softening of rocks around the pluton. The simulated temperature and strength profiles confirm that ductile deformation was related to thermal weakening (Saint-Blanquat et al., 2001). Results of incremental growth calculations show that the pluton remains hot and only partially crystalline for millions of years when it grows by frequent input of small batches of liquid. At the mid-crustal level, the ductile region around the pluton is much wider and exists longer than at the shallow crustal level. Brittle rheology is dominant during the late stage growth at the shallow depth. When the pluton grows instantly or by only few episodes of large batches of input, the mobile part of the pluton is thin and the ductile aureole is narrower. High-frequency incremental growth by smaller magma batches produces a large volume of mobile magma that has the potential to induce internal magmatic layering that may be reflected in aligned acquired magnetic susceptibility (AMS) in upper parts of the pluton. By examing the chamber overpressure generated by injection of magma (Jellinek and DePaolo, 2003) and the overpressure related to magma buoyancy (Karlstrom et al, 2010), eruption during high-frequency magma input may be promoted by the magma buoyancy while an eruption during low-frequency input may be caused by injection of a large magma batch.

Structural evolution of the La Paya pluton (Sierra de Cachi, NW Argentina): insights from the study of its magnetic fabric

NASA Astrophysics Data System (ADS)

Aranguren, Aitor; Hongn, Fernando; María Tubía, José; Vegas, Néstor

2017-04-01

The La Paya granite is a pluton elongated in a northerly direction that spreads over 10 km2 in the Sierra de Cachi (Eastern Cordillera of Salta, Andean belt, NW Argentina). This pluton intrudes into high-temperature and low-pressure migmatites and schists. The metamorphic evolution of the country rocks and the emplacement of the La Paya pluton took place in an extensional tectonic setting during Ordovician times (Hongn et al., 2014). Subsequently, a compressional tectonic event led to the formation of large E-verging folds with a penetrative axial planar foliation. Due to the folding event, the current metamorphic zonation is inverted and the metamorphic degree rises towards the west. The granite is concordant with the metamorphic zonation and with the country rocks foliation. Schists with biotite and andalucite (low to medium metamorphic grade) crop out in the eastern border of the pluton and schists with cordierite (high grade) in the western border. The pluton is characterized by the coexistence of magmatic and solid-state structures. The deformation is localized in shear bands concentrated in the pluton roof. Wide sectors of the pluton core preserve medium- to coarse-grained equigranular textures of magmatic origin on which we have collected samples from 28 sites in order to perform an AMS study. Susceptibility values are very low, with k ranging between 19 and 67 x 10-6 SI. The obtained anisotropy values are in agreement with the magmatic character of the analysed samples (Pj between 1,03-1,07). The magnetic foliations are concordant with the contacts of the pluton. They show northwards trends and dips to the west that are steeper close to the eastern pluton border. Magnetic lineations are concentrated in two main maxima that define a great circle parallel to the pluton elongation. The parallelism between the magnetic fabrics from areas with magmatic structures and the structures observed in domains with solid-state deformation points to a syn-kinematic emplacement of the pluton during the development of the roof shear zone. The cartographic data and the distribution of the magnetic lineations of the La Paya granite allows to recognize an east-vergent antiform that folds the roof shear zone and the overall laminar pluton. Hongn, F.D., Tubía, J.M., Esteban, J.J., Aranguren, A., Vegas, N., Sergeev, S., Larionov, A. and Basei, M. (2014). Journal of Iberian Geology 40 (2), 225-240. DOI: 10.5209/rev_JIGE.2014.v40.n2.45303

Iron variation within a granitic pluton as determined by near-infrared reflectance

NASA Technical Reports Server (NTRS)

Baird, A. K.

1984-01-01

One-hundred fifty-one previously chemically analyzed samples of tonalite from the Lakeview Mountains pluton, southern California batholith, were analyzed for their iron content using near-infrared spectrophotometry. Compared to the earlier analyses of the same sample set by X-ray fluorescence spectrography, the infrared data have higher analytical variance but clearly define patterns of compositional zonation in the pluton which are closely similar to those patterns obtained from X-ray data; petrogenetic interpretations for the pluton would be the same from either data set. Infrared spectral data can be obtained directly in the field with relatively simple instruments and field measurements can be made to average local heterogeneities that often mask significant plutonic variations.

Natural radioactivity levels in granitic plutons and groundwaters in Southeast part of Eskisehir, Turkey.

PubMed

Orgün, Y; Altinsoy, N; Gültekin, A H; Karahan, G; Celebi, N

2005-08-01

The present work investigated the radioactivity level of the granitoid plutons and its effect on the groundwaters in the southeast part of Eskisehir. Fourteen granitic samples from the Kaymaz and Sivrihisar plutons and 11 groundwater samples from the near vicinity of the pluton were analyzed. The activity concentrations measured for (238)U and (232)Th ranged from 43.59+/-2 to 651.80+/-24 Bq/kg, and 51.16+/-3 to 351.94+/-13 Bq/kg, respectively. The activity concentrations obtained for (40)K varied from 418.50+/-17 to 1618.03+/-66 Bq/kg. The absorbed dose rates in air outdoors ranged from 87.14 to 531.81 nGy/h. All the results obtained from the Kaymaz pluton are higher than those from the Sivrihisar. The U (ave. 16.6 ppm) and Th (ave. 49.9 ppm) values of the Kaymaz pluton are higher than the average concentrations of the magmatic rocks of granitic composition. These results are consistent with high dose rates of the pluton. The gross-alpha activities in the groundwater samples ranged from 0.009 to 1.64 Bq/l and the gross-beta activities from 0.006 to 0.89 Bq/l. The highest gross-alpha value was found in the sample taken from near the Kaymaz pluton. The concentrations of (222)Rn varied from 0.060 to 0.557 Bq/l.

Cretaceous plutonic rocks in the Donner Lake-Cisco Grove area, northern Sierra Nevada, California

USGS Publications Warehouse

Kulow, Matthew J.; Hanson, Richard E.; Girty, Gary H.; Girty, Melissa S.; Harwood, David S.

1998-01-01

The northernmost occurrences of extensive, glaciated exposures of the Sierra Nevada batholith occur in the Donner Lake-Cisco Grove area of the northern Sierra Nevada. The plutonic rocks in this area, which are termed here the Castle Valley plutonic assemblage, crop out over an area of 225 km2 and for the most part are shown as a single undifferentiated mass on previously published geological maps. In the present work, the plutonic assemblage is divided into eight separate intrusive units or lithodemes, two of which each consist of two separate plutons. Compositions are dominantly granodiorite and tonalite, but diorite and granite form small plutons in places. Spectacular examples of comb layering and orbicular texture occur in the diorites. U-Pb zircon ages have been obtained for all but one of the main units and range from ~120 to 114 Ma, indicating that the entire assemblage was emplaced in a narrow time frame in the Early Cretaceous. This is consistent with abundant field evidence that many of the individual phases were intruded penecontemporaneously. The timing of emplacement correlates with onset of major Cretaceous plutonism in the main part of the Sierra Nevada batholith farther south. The emplacement ages also are similar to isotopic ages for gold-quartz mineralization in the Sierran foothills west of the study area, suggesting a direct genetic relationship between the voluminous Early Cretaceous plutonism and hydrothermal gold mineralization.

Gamma-ray spectrometry in the field: Radioactive heat production in the Central Slovakian Volcanic Zone

NASA Astrophysics Data System (ADS)

Harley, Thomas L.; Westaway, Rob; McCay, Alistair T.

2017-05-01

We report 62 sets of measurements from central-southern Slovakia, obtained using a modern portable gamma-ray spectrometer, which reveal the radioactive heat production in intrusive and extrusive igneous rocks of the Late Cenozoic Central Slovakian Volcanic Zone. Sites in granodiorite of the Štiavnica pluton are thus shown to have heat production in the range 2.2-4.9 μW m- 3, this variability being primarily a reflection of variations in content of the trace element uranium. Sites in dioritic parts of this pluton have a lower, but overlapping, range of values, 2.1-4.4 μW m- 3. Sites that have been interpreted in adjoining minor dioritic intrusions of similar age have heat production in the range 1.4-3.3 μW m- 3. The main Štiavnica pluton has zoned composition, with potassium and uranium content and radioactive heat production typically increasing inward from its margins, reflecting variations observed in other granodioritic plutons elsewhere. It is indeed possible that the adjoining dioritic rocks, hitherto assigned to other minor intrusions of similar age, located around the periphery of the Štiavnica pluton, in reality provide further evidence for zonation of the same pluton. The vicinity of this pluton is associated with surface heat flow 40 mW m- 2 above the regional background. On the basis of our heat production measurements, we thus infer that the pluton has a substantial vertical extent, our preferred estimate for the scale depth for its downward decrease in radioactive heat production being 8 km. Nonetheless, this pluton lacks any significant negative Bouguer gravity anomaly. We attribute this to the effect of the surrounding volcanic caldera, filled with relatively low-density lavas, 'masking' the pluton's own gravity anomaly. We envisage that emplacement occurred when the pluton was much hotter, and thus of lower density, than at present, its continued uplift, evident from the local geomorphology, being the isostatic consequence of localized erosion. The heat production in this intrusion evidently plays a significant role, hitherto unrecognized, in the regional geothermics.

Microstructure effects on the recrystallization of low-symmetry alpha-uranium

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCabe, Rodney James; Richards, Andrew Walter; Coughlin, Daniel Robert

2015-10-01

We employ electron backscatter diffraction (EBSD) to investigate microstructural evolution of uranium during recrystallization. To understand the relationship between microstructure and recrystallization, we use measures of intra-granular misorientation within grains and near grain boundaries in both deformed (non-recrystallized) uranium and recrystallizing uranium. The data show that the level of intra-granular misorientation depends on crystallographic orientation. However, contrary to expectation, this relationship does not significantly affect the recrystallization texture. Rather, the analysis suggests that recrystallization nucleation occurs along high angle grain boundaries in the deformed microstructure. Specifically, we show that the nucleation of recrystallized grains correlates well with the spatially heterogeneousmore » distribution of high angle boundaries. Due to the inhomogeneous distribution of high angle boundaries, the recrystallized microstructure after long times exhibits clustered distributions of small and large grains. Twin boundaries do not appear to act as recrystallization nucleation sites.« less

A Rate-Theory-Phase-Field Model of Irradiation-Induced Recrystallization in UMo Nuclear Fuels

NASA Astrophysics Data System (ADS)

Hu, Shenyang; Joshi, Vineet; Lavender, Curt A.

2017-12-01

In this work, we developed a recrystallization model to study the effect of microstructures and radiation conditions on recrystallization kinetics in UMo fuels. The model integrates the rate theory of intragranular gas bubble and interstitial loop evolutions and a phase-field model of recrystallization zone evolution. A first passage method is employed to describe one-dimensional diffusion of interstitials with a diffusivity value several orders of magnitude larger than that of fission gas xenons. With the model, the effect of grain sizes on recrystallization kinetics is simulated. The results show that (1) recrystallization in large grains starts earlier than that in small grains, (2) the recrystallization kinetics (recrystallization volume fraction) decrease as the grain size increases, (3) the predicted recrystallization kinetics are consistent with the experimental results, and (4) the recrystallization kinetics can be described by the modified Avrami equation, but the parameters of the Avrami equation strongly depend on the grain size.

Ages and geochemical comparison of coeval plutons and volcanics from the central and eastern Aleutian arc

NASA Astrophysics Data System (ADS)

Cai, Y.; Kelemen, P. B.; Goldstein, S. L.; Yogodzinski, G. M.; Hemming, S. R.; Rioux, M. E.; Cooperdock, E. H. G.

2016-12-01

On average, arc volcanics are compositionally different from the bulk continental crust. The relatively little known plutonic part of intra-oceanic arcs is more similar to continental crust, and may play a significant role for understanding continental crust formation. Our pilot study [1] demonstrated that in the central and eastern Aleutian islands, predominantly tholeiitic Quaternary volcanic rocks have statistically different Pb-Nd-Sr-Hf isotopic signatures than predominantly calc-alkaline Miocene and older plutonic rocks, showing that these plutonics and volcanics were derived from compositionally different sources. However, studies of older volcanics are needed to determine whether (1) there was a change in magma chemistry in the central and eastern Aleutian arc between the Miocene and the present-day, or (2) coeval plutonics and volcanics are compositionally different, and formed by different processes. For example, silica- and water-rich calc-alkaline magmas may preferentially stall and form plutons after extensive degassing and rapid viscosity increase in the mid-crust, while silica- and water-poor tholeiitic magmas tend to erupt at the surface. Here we report new geochronological and geochemical results on samples collected during the 2015 GeoPRISMS shared logistics field campaign. We collected more than 500 volcanic and plutonic samples from Unalaska, Umnak and Atka islands, including pillow lavas, sills, and larger plutons. A subset of 50 samples has been analyzed for major and trace element chemistry, Pb-Nd-Sr-Hf isotopes, and Ar-Ar geochronology. So far,40Ar/39Ar cooling dates measured for the volcanics span a wide range, from zero to 35 Ma, which is comparable to the age distribution of the plutons ( 9 Ma to 39 Ma) from these islands. The forthcoming, combined geochronology and geochemistry of coeval plutonics and volcanics will contribute to our understanding of the connections between arc magmatism and continental crust formation. [1] Cai et al., EPSL, 2015, vol 431, pp. 119-126.

Rapid Intradeformational Emplacement of the Big Hole Canyon Pluton Into the Sevier Fold-Thrust Belt, Southwest Montana.

NASA Astrophysics Data System (ADS)

Hespenheide, M. A.

2002-12-01

The Big Hole Canyon pluton (BHCp) is a Late Cretaceous pluton emplaced within the Sevier fold-and-thrust belt of the western North American Cordillera. The pluton is exposed over 60km2 and a thickness of ~1400m. Combined anisotropy of magnetic susceptibility (AMS), structural, and field studies document a clear pattern of magmatic flow radiating from at least three subvertical conduits <100m wide and ~300 to ~800m long. Interpreted flow plunges change rapidly to subhorizontal fabrics across the rest of the pluton, matching the expected pattern for laccolithic emplacement. Ascent conduits within the Big Hole Canyon pluton are coincident with the fold axis of an anticline above a thrust ramp, suggesting that the magma ascended up the fault of the fault-bend-fold. Geobarometry and stratigraphic reconstructions indicate an emplacement depth of approximately ~3km. Preliminary thermal modeling indicates that the BHCp was emplaced in 250,000 years, likely between periods of regional shortening deformation. Rapid magma ascent rates calculated by dike flow modeling and implied by entrained wall-rock xenoliths may indicate sequential magma injection into the pluton; an absence of chill margins between phases within the pluton indicates that sequential injections must have taken place quickly enough that the magmas did not have time to cool below the solidus temperature. The geometry and location of the BHCp suggest that magma used a pre-existing fault as a mechanical discontinuity for both ascent and emplacement. Continued intrusion of magma had a sufficient amount of driving pressure to stretch, shear, and lift the roof of the pluton. Detailed field mapping, structural studies, AMS, and thermobarometry indicate that the Late Cretaceous Big Hole Canyon pluton was emplaced as a laccolith at the top of a pre-existing fault-bend-fold in the frontal portion of the Sevier fold-thrust belt.

Evidence for post-1620 Ma Proterozoic regional deformation, Lucy Gray Range, southern Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duebendorfer, E.M.; Christensen, C.H.; Shafiqullah, M.

1993-04-01

Major mylonite zones in the northern Lucy Gray Range, Nevada, deform and are spatially associated with the 1,425 Ma Beer Bottle Pass pluton, Mylonitic granite yielded a K-Ar biotite date of 1,400 [+-] 30 Ma and is overlain nonconformably by the Cambrian Tapeats Sandstone, thus constraining deformation to the Proterozoic. The mylonites may therefore represent an unrecognized period of Proterozoic deformation in the Southwest. Field and microstructural studies were undertaken to evaluate between 3 possible models for the apparent spatial association of granite and mylonites: (1) deformation directly related to pluton emplacement (ballooning); (2) synkinematic pluton emplacement; or (3) post-emplacementmore » deformation. Mylonite zones up to 50 meters thick strike north to northeast, dip moderately to steeply northwest, and contain a remarkably consistent west-plunging mineral lineation. Mylonites are present locally at the granite-wall rock contact; however, less than 30% of the exposed contact is mylonitic. The authors reject a pluton-emplacement origin for the mylonites because (1) mylonite zones within wall rocks locally strike at high angles to an undeformed pluton-wall rock contact, (2) the consistent (pluton-side-down) shear sense is more compatible with a uniform-sense simple shear zone than a ballooning pluton, (3) plane strain fabrics dominate over flattening fabrics, and (4) mylonites adjacent to pluton contacts lack annealing textures predicted by the ballooning model. If so, the conventional interpretation of 1,400 Ga granitoids as anorogenic may need to be re-evaluated. The authors cannot, however, rule out the possibility that the mylonites completely postdate intrusion of the Beer Bottle Pass pluton. Future work is planned to delimit the regional extent of this previously unrecognized Proterozoic deformational event.« less

The Jeffers Brook diorite-granodiorite pluton: style of emplacement and role of volatiles at various crustal levels in Avalonian appinites, Canadian Appalachians

NASA Astrophysics Data System (ADS)

Pe-Piper, Georgia; Piper, David J. W.

2018-04-01

Small appinite plutons ca. 610 Ma outcrop in the peri-Gondwanan Avalon terrane of northern Nova Scotia, with different structural levels exposed. Field mapping shows that the Jeffers Brook pluton is a laccolith emplaced along an upper crustal thrust zone, likely in a dilational jog in a regional dextral strike-slip system. The oldest rocks are probably mafic sills, which heated the area facilitating emplacement of intermediate magmas. Cross-cutting relationships show that both mafic and intermediate magmas were supplied throughout the history of pluton emplacement. The modal composition, mineral chemistry, and bulk chemistry of gabbro, diorite, tonalite, granodiorite, and granite have been studied in the main plutonic phases, dykes, and sills, and mafic microgranular enclaves. As with the type appinites in the Scottish Caledonides, the pluton shows evidence of high water content: the dominance of hornblende, locally within pegmatitic texture; vesicles and irregular felsic patches in enclaves; and late aplite dykes. Analyzed mafic microgranular enclaves are geochemically similar to larger diorite bodies in the pluton. Tonalite-granodiorite is distinct from the diorite in trace-element geochemistry and radiogenic isotopes. Elsewhere to the east, similar rocks of the same age form vertically sheeted complexes in major shear zones; hornblende chemistry shows that they were emplaced at a deeper upper crustal level. This implies that little of the observed geochemical variability in the Jeffers Brook pluton was developed within the pluton. The general requirements to form appinites are proposed to be small magma volumes of subduction-related magmas that reach the upper crust because of continual heating by mafic magmas moving through strike-slip fault pathways and trapping of aqueous fluids rather than venting through volcanic activity.

Investigating Dissolution and Precipitation Phenomena with a Smartphone Microscope

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lumetta, Gregg J.; Arcia, Edgar

A novel smartphone microscope can be used to observe the dissolution and crystallization of sodium chloride at a microscopic level. Observation of these seemingly simple phenomena through the microscope at 100× magnification can actually reveal some surprising behavior. These experiments offer the opportunity to discuss some basic concepts such as how the morphological features of the crystals dictates how the dissolution process proceeds, and how materials can be purified by re-crystallization techniques.

The nature and barium partitioning between immiscible melts - A comparison of experimental and natural systems with reference to lunar granite petrogenesis

NASA Technical Reports Server (NTRS)

Neal, C. R.; Taylor, L. A.

1989-01-01

Elemental partitioning between immiscible melts has been studied using experimental liquid-liquid Kds and those determined by analysis of immiscible glasses in basalt mesostases in order to investigate lunar granite petrogenesis. Experimental data show that Ba is partitioned into the basic immiscible melt, while probe analysis results show that Ba is partitioned into the granitic immiscible melt. It is concluded that lunar granite of significant size can only occur in a plutonic or deep hypabyssal environment.

Petrology of the Plutonic Rocks of west-central Alaska

USGS Publications Warehouse

Miller, Thomas P.

1970-01-01

A series of plutons in west-central Alaska defines the Hogatza plutonic belt which extends for about 200 miles in an east-west direction from the northeastern Seward Peninsula to the Koyukuk River. The plutonic rocks have an aggregate area of about 1,200 square miles and their composition, distribution, and possible petrogenesis are discussed for the first time in this report. Field, petrographic and chemical data supported by K/Ar age dating indicate the plutonic rocks are divisible into two suites differing in age, location, and composition. The western plutons are mid-Cretaceous (~100 m.y.) in age and consist of a heterogeneous assemblage of monzonite, syenite, quartz monzonite. Associated with these granitic rocks is a group of alkaline sub-silicic rocks that forma belt of intrusive complexes extending for a distance of at least 180 miles from west-central Alaska to the Bering Sea. The complex at Granite Mountain shows a rare example of zoning from an alkaline rim to a quartz-bearing core. The occurrence of a similar complex at Cape Dezhnev on the easternmost tip of Siberia suggests the alkaline province may extend into Siberia. The easternmost plutons are Late Cretaceous (180 m.y.) in age and composed primarily of granodiorite and quartz monzonite similar to calc-alkaline plutons found throughout the North America Cordillera. The plutons are epizonal and intrude deformed but unmetamorphosed Lower Cretaceous andesitic volcanics and volcanic graywacke which constitute the highly mobile Yukon-Koyukuk volcanogenic province of west-central Alaska. No older rocks have been found within the confines of this vast tract; the occurrence of a bounding ophiolite sequence has lead to the suggestion that the province was formed by large-scale rifting and is underlain by oceanic crust. The possibility of no juvenile sialic crust over much of the area suggests that the potassium-rich magma now represented by the alkaline rocks originated in the mantle. The distribution of the alkaline rocks appears to be related to regional structural features, particularly the boundary between the Mesozoic volcanogenic province of west-central Alaska and the thrust-faulted province of metamorphic-plutonic and sedimentary rocks of Paleozoic and Precambrian age that forms the eastern Seward Peninsula. This boundary may have been a zone of structural weakness along which alkaline magma was generated. Modal and chemical trends suggest that the potassium-rich magma influenced the composition of more granitic magmas forming at higher levels. The latter may have been forming as a result of anatexis of andesite and mixing of mantle-derived mafic magma. The result is the heterogeneous assemblage of generally potassium-rich plutonic rocks that forms the west end of the Hogataza plutonic belt. The loci of magmatism in west-central Alaska shifted east in Late Cretaceous time and the eastern plutons show only local signs of potassium enrichment. They are compositionally homogeneous and differences within plutons appear due to local contamination.

Publications - SR 53 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

Group; Lead; Limestone; Lode; Marble; Mercury; Mesozoic; Metallurgy; Metamorphic Rocks; Mineral Pluton; Nickel; Nikolai Greenstone; Noatak Sandstone; Nome Group; Nuggets; Orca Group; Ordovician; Ores ; Paleozoic; Palladium; Pennsylvanian; Placer; Platinum; Platinum Group Elements; Plutonic; Plutonic Hosted

Publications - SR 57 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

; Kanayut Conglomerate; Kayak Shale; Kuskokwim Group; Lead; Limestone; Lode; Marble; Massive Sulfides ; Noatak Sandstone; Nome Group; Nuggets; Orca Group; Ordovician; Ores; Paleozoic; Palladium; Pennsylvanian ; Placer; Platinum; Platinum Group Elements; Plutonic; Plutonic Hosted; Plutonic Rocks; Polymetallic Vein

Lead-isotopic evidence for distinct source of granite and for distinct basement in the northern Appalachians, Maine.

USGS Publications Warehouse

Ayuso, R.A.

1986-01-01

Lead-isotopic compositions of feldspars in high-level Devonian granitic plutons across the northern Appalachians were measured. The presence of three fundamentally different sources of granites was indicated by three distinct lead-isotope groups. Plutons in the coastal lithotectonic block are the most radiogenic (206Pb/204Pb) 18.25-19.25; 207Pb/204Pb 15.59-15.67; 208Pb/204Pb 38.00-38.60); plutons in northern Maine are the least radiogenic (206Pb/204Pb 18.00-18.50; 207Pb/204Pb 15.51-15.55; 208Pb/204Pb 37.80-38.38). Intermediate lead-isotope values characterize the plutons in central Maine. All plutons show relatively radiogenic lead values for their ages and suggest the imprint of continental crustal sources, particularly in the coastal block. These plutons were formed in different crustal fragments in a continental environment, that were juxtaposed after emplacement of the granites.-L.C.H.

Constraints on the depth of generation and emplacement of a magmatic epidote-bearing quartz diorite pluton in the Coast Plutonic Complex, British Columbia

USGS Publications Warehouse

Chang, J.M.; Andronicos, C.L.

2009-01-01

Petrology and P-T estimates indicate that a magmatic epidote-bearing quartz diorite pluton from Mt. Gamsby, Coast Plutonic Complex, British Columbia, was sourced at pressures below ???1.4 GPa and cooled nearly isobarically at ???0.9 GPa. The P-T path indicates that the magma was within the stability field of magmatic epidote early and remained there upon final crystallization. The pluton formed and crystallized at depths greater than ???30 km. REE data indicate that garnet was absent in the melting region and did not fractionate during crystallization. This suggests that the crust was less than or equal to ???55 km thick at 188 Ma during the early phases of magmatism in the Coast Plutonic Complex. Late Cretaceous contractional deformation and early Tertiary extension exhumed the rocks to upper crustal levels. Textures of magmatic epidote and other magmatic phases, combined with REE data, can be important for constraining the P-T path followed by magmas. ?? 2009 Blackwell Publishing Ltd.

Pan-African alkali granites and syenites of Kerala as imprints of taphrogenic magmatism in the South Indian shield

NASA Technical Reports Server (NTRS)

Santosh, M.; Drury, S. A.; Iyer, S. S.

1988-01-01

Granite and syenite plutons with alkaline affinities ranging in age from 550 to 750 Ma sporadically puncture the Precambrian granulites of the Kerala region. All the bodies are small (20 to 60 sq km), E-W to NW-SE elongated elliptical intrusives with sharp contacts and lie on or close to major late Proterozoic lineaments. Geochemical plots of A-F-M and An-Ab-Or relations show an apparent alkali enrichment trend on the former, but the plutons define relatively distinct fields on the latter. Most of the plutons are adamellitic to granitic by chemistry. The variations of SiO2 with log sub 10 K2O/MgO (1) brings out the distinct alkaline nature of the plutons. Some of the granites are extremely potassic, like the Peralimala pluton, which shows up to 11.8 percent K2O. On a SiO2-Al2O3-Na2O+K2O (mol percent) plot, the plutons vary from peraluminous to peralkaline, but none are nepheline normative. Low MgO, low to moderate CaO and high Fe2O3/FeO values are other common characteristics. Among trace elements, depletion of Ba, Sr and Rb with high K/Ba and K/Rb values are typical. Overall, the plutons show a trend of decreasing K/Rb ratio with increasing K content. Individual plutons show more clearly defined trends similar to those from granitic masses characterized by plagioclase fractionation.

Quartz grainsize evolution during dynamic recrystallization across a natural shear zone boundary

NASA Astrophysics Data System (ADS)

Xia, Haoran; Platt, John P.

2018-04-01

Although it is widely accepted that grainsize reduction by dynamic recrystallization can lead to strain localization, the details of the grainsize evolution during dynamic recrystallization remain unclear. We investigated the bulge size and grainsizes of quartz at approximately the initiation and the completion stages of bulging recrystallization across the upper boundary of a 500 m thick mylonite zone above the Vincent fault in the San Gabriel Mountains, southern California. Within uncertainty, the average bulge size of quartz, 4.7 ± 1.5 μm, is the same as the recrystallized grainsize, 4.5 ± 1.5 μm, at the incipient stage of dynamic recrystallization, and also the same within uncertainties as the recrystallized grainsize when dynamic recrystallization is largely complete, 4.7 ± 1.3 μm. These observations indicate that the recrystallized grainsize is controlled by the nucleation process and does not change afterwards. It is also consistent with the experimental finding that the quartz recrystallized grainsize paleopiezometer is independent of temperature.

An evolving tectonic environment of Late Carboniferous to Early Permian granitic plutons in the Chinese Altai and Eastern Junggar terranes, Central Asian Orogenic Belt, NW China

NASA Astrophysics Data System (ADS)

Zhang, Chen; Liu, Dongdong; Luo, Qun; Liu, Luofu; Zhang, Yunzhao; Zhu, Deyu; Wang, Pengfei; Dai, Quanqi

2018-06-01

The Central Asian Orogenic Belt (CAOB) represents one of the most important sites of juvenile crustal growth during the Phanerozoic. Located in the central part of the CAOB, the Chinese Altai and Eastern Junggar terranes record the collisional processes between the peri-Siberian and Kazakhstan orogenic systems. However, the precise timing of collision between the two terranes remains controversial. The Wukuli and Kadelat plutons in the Chinese Altai belt are dated at ∼305 and ∼280 Ma respectively, whereas the Aketas pluton in the Eastern Junggar terrane is dated at ∼308 Ma. Granites from the Wukuli and Kadelat plutons are strongly peraluminous (A/CNK > 1.1), and are characterized by low Al2O3, Na2O, MnO, MgO, CaO and heavy rare earth element (HREE) contents, but with high SiO2, K2O and Rb contents as well as high Rb/Sr ratios. Granites from the Wukuli pluton have low εNd(t) and εHf(t) values of -3.7 to -3.4 and -9.7 to +4.9, whereas those from the Kadelat pluton have values of -3.6 to -3.4 and -8.0 to +2.6. These features suggest S-type affinity for the Wukuli and Kadelat plutons with magma derivation through partial melting of Mesoproterozoic metasediments. The Aketas pluton is composed of weakly peraluminous quartz monzonites that have A/CNK values ranging from 0.92 to 1.08, with high Na2O, Sr, and Sr/Y, and low Y, Yb, Nb, and Ta. These rocks display positive εNd(t) (+4.8 to +6.4) and εHf(t) (+9.7 to +14.6) values, and low initial 87Sr/86Sr ratios (0.703357-0.703868), similar to modern adakites, suggesting that the quartz monzonites were derived from the partial melting of lower crustal material. The geochemical characteristics suggest that the Aketas pluton was formed in a subduction-related setting, the Wukuli pluton in a syn-collisional setting, and the Kadelat pluton in the subsequent post-orogenic strike-slip-related setting. In combination with data from other granitoids in these two terranes, the Aketas pluton represents the youngest record of subduction-related environments, suggesting that the final collision between the Chinese Altai and Eastern Junggar terranes might have occurred between 308 and 304 Ma.

Modifications in the AA5083 Johnson-Cook Material Model for Use in Friction Stir Welding Computational Analyses

NASA Astrophysics Data System (ADS)

Grujicic, M.; Pandurangan, B.; Yen, C.-F.; Cheeseman, B. A.

2012-11-01

Johnson-Cook strength material model is frequently used in finite-element analyses of various manufacturing processes involving plastic deformation of metallic materials. The main attraction to this model arises from its mathematical simplicity and its ability to capture the first-order metal-working effects (e.g., those associated with the influence of plastic deformation, rate of deformation, and the attendant temperature). However, this model displays serious shortcomings when used in the engineering analyses of various hot-working processes (i.e., those utilizing temperatures higher than the material recrystallization temperature). These shortcomings are related to the fact that microstructural changes involving: (i) irreversible decrease in the dislocation density due to the operation of annealing/recrystallization processes; (ii) increase in grain-size due to high-temperature exposure; and (iii) dynamic-recrystallization-induced grain refinement are not accounted for by the model. In this study, an attempt is made to combine the basic physical-metallurgy principles with the associated kinetics relations to properly modify the Johnson-Cook material model, so that the model can be used in the analyses of metal hot-working and joining processes. The model is next used to help establish relationships between process parameters, material microstructure and properties in friction stir welding welds of AA5083 (a non-age-hardenable, solid-solution strengthened, strain-hardened/stabilized Al-Mg-Mn alloy).

An Archean Geomagnetic Reversal in the Kaap Valley Pluton, South Africa

PubMed

Layer; Kroner; McWilliams

1996-08-16

The Kaap Valley pluton in South Africa is a tonalite intrusion associated with the Archean Barberton Greenstone Belt. Antipodal paleomagnetic directions determined from the central and marginal parts of the pluton record a geomagnetic reversal that occurred as the pluton cooled. The age of the reversal is constrained by an 40Ar/39Ar plateau age from hornblende at 3214 +/- 4 million years, making it the oldest known reversal. The data presented here suggest that Earth has had a reversing, perhaps dipolar, magnetic field since at least 3.2 billion years ago.

Is there a geochemical link between volcanic and plutonic rocks in the Organ Mountains caldera?

NASA Astrophysics Data System (ADS)

Memeti, V.; Davidson, J.

2013-12-01

Results from separate volcanic and plutonic studies have led to inconsistent conclusions regarding the origins and thus links between volcanic and plutonic systems in continental arcs and the magmatic processes and time scales responsible for their compositional variations. Some have suggested that there is a geochemical and geochronological disconnect between volcanic and plutonic rocks and hence have questioned the existence of magma mush columns beneath active volcanoes. Investigating contemporary volcanic and plutonic rocks that are spatially connected is thus critical in exploring these issues. The ca. 36 Ma Organ Mountains caldera in New Mexico, USA, represents such a system exposing contemporaneous volcanic and plutonic rocks juxtaposed at the surface due to tilting during extensional tectonics along the Rio Grande Rift. Detailed geologic and structural mapping [1] and 40Ar/39Ar ages of both volcanics and plutons [2] demonstrate the spatial and temporal connection of both rock types with active magmatism over >2.5 myr. Three caldera-forming ignimbrites erupted within 600 kyr [2] from this system with a total erupted volume of 500-1,000 km3 as well as less voluminous pre- and post-caldera trachyte and andesite lavas. The ignimbrite sequence ranges from a crystal-poor, high-SiO2 rhyolite at the base to a more crystal-rich, low-SiO2 rhyolite at the top. Compositional zoning with quartz-monzonite at the base grading to syenite and alaskite at the top is also found in the Organ Needle pluton, the main intrusion, which is interpreted to be the source for the ignimbrites [1]. Other contemporaneous and slightly younger plutons have dioritic to leucogranitic compositions. We examined both volcanic and plutonic rocks with petrography and their textural variations with color cathodoluminescence, and used whole rock element and Sr, Nd and Pb isotope geochemistry to constrain magma compositions and origins. Electron microprobe analyses on feldspars have been completed to determine within-crystal geochemical variations. Our current conclusions and working hypotheses are: 1) All igneous rocks from the Organ Mountains are crustal-mantle melt mixtures indicating two component mixing; 2) the caldera-forming ignimbrites are likely derived from a fractionating Organ Needle pluton; 3) pre- and post-caldera lavas are isotopically similar to the post-caldera Sugarloaf Peak quartz-monzonite; 4) K-feldspar cumulate textures in the structurally top 0.5-1 km of the Organ Needle pluton indicate that interstitial melt was lost from the magma mush, which likely fed the ignimbrite eruptions. 5) Plutonic feldspar textures are complex compared to rather simple zoned volcanic feldspars including K-feldspar rimmed plagioclase, plagioclase rimmed K-feldspar and unrimmed feldspars occurring over a range of grain sizes at thin section scale. Some volcanic feldspar phenocrysts have any previous zonation erased due to late stage albitization. Although the single mineral studies are still work in progress and details need resolving, our data so far suggest a geochemical link between volcanic and plutonic rocks of the Organ Mountains caldera, albeit a complex one; and greater complexity in plutonic versus volcanic minerals. [1] Seager (1980), NM Bureau of Mines and Min. Res. Memoir 36, 97 p. [2] Zimmerer & McIntosh (2013) Journal of Geophysical Research, v. 93, p. 4421-4433

Susceptibility of Goethite to Fe2+-Catalyzed Recrystallization over Time.

PubMed

Joshi, Prachi; Fantle, Matthew S; Larese-Casanova, Philip; Gorski, Christopher A

2017-10-17

Recent work has shown that iron oxides, such as goethite and hematite, may recrystallize in the presence of aqueous Fe 2+ under anoxic conditions. This process, referred to as Fe 2+ -catalyzed recrystallization, can influence water quality by causing the incorporation/release of environmental contaminants and biological nutrients. Accounting for the effects of Fe 2+ -catalyzed recrystallization on water quality requires knowing the time scale over which recrystallization occurs. Here, we tested the hypothesis that nanoparticulate goethite becomes less susceptible to Fe 2+ -catalyzed recrystallization over time. We set up two batches of reactors in which 55 Fe 2+ tracer was added at two different time points and tracked the 55 Fe partitioning in the aqueous and goethite phases over 60 days. Less 55 Fe uptake occurred between 30 and 60 days than between 0 and 30 days, suggesting goethite recrystallization slowed with time. Fitting the data with a box model indicated that 17% of the goethite recrystallized after 30 days of reaction, and an additional 2% recrystallized between 30 and 60 days. The decreasing susceptibility of goethite to recrystallize as it reacted with aqueous Fe 2+ suggested that recrystallization is likely only an important process over short time scales.

Magma Reservoirs from the Perspective of Supervolcanoes and Granitic Plutons: "Big Red Blobs" and "Balloons and Soda Straws" are Real

NASA Astrophysics Data System (ADS)

Christiansen, E. H.

2016-12-01

Simple models describing silicic magma reservoirs and their connections with volcanic rocks have been denigrated as "big red blobs" and "balloons-and-soda straws." Although these models are certainly generalized to convey complex relations, there are multiple reasons to accept the existence of large magma chambers and direct connections between volcanoes and plutonic rocks. These include:-Geophysical evidence (seismic, magnetotelluric, and geodetic) for the existence of large bodies of magma in the crust today. Magma is a mixture of liquids, solids, and fluids. It does not have to be melt rich, nor does it need to be mobile and eruptible; it just has to have melt present. -Eruptions of large volumes (>1,000 km3) of dacitic to rhyolitic magma and large collapse calderas (30-50 km across). -The thermal lifetimes of large bodies are extended by high recharge rates. Individual bodies of magma may exist for tens to hundreds of thousands of years.-Geochronological evidence that pluton lifetimes are similar to those of volcanic fields.-Evidence for incremental emplacement of a pluton is not evidence against the former existence of a large magma reservoir, but the natural consequence of ongoing replenishment and crystallization after eruptions cease. Thus, what might have been a large liquid-dominated system at the time of eruption of a large ignimbrite, is subsequently intruded by new batches of magma as it crystallizes and closes down. This destroys the evidence for a large red blob and creates a composite pluton. -Direct and indirect evidence connect plutons to large eruptions. This is shown by field relations, geochronology, as well as chemical, mineralogical, and isotopic similarities of volcanic and plutonic rocks. -Volcanic and plutonic differentiation patterns are very similar, but differ in some ways because cumulates are preserved in the plutonic record and because intrusions continue to differentiate (liquids separate from solids) until the last bit of liquid is consumed. Highly evolved liquids are present in the volcanic record, but are less common than in intrusions. Most plutonic rocks appear to be mixtures of cumulate minerals and interstitial melt unable to separate from the coarsening mush.

The Recrystallization Behavior of Unalloyed Mg and a Mg-Al Alloy

NASA Astrophysics Data System (ADS)

Murphy, Aeriel D.; Allison, John E.

2018-02-01

The static recrystallization behavior of pure Mg and Mg-4Al was characterized over a range of annealing temperatures. The electron backscatter diffraction grain orientation spread technique was used to quantify the level of recrystallization at various annealing times. Recrystallization kinetics were characterized using the Johnson-Mehl-Avrami-Kolmogorov (JMAK) relationship and it was found that two sequential annealing stages exist. Stage 1 involves heterogeneous nucleation of recrystallization in regions with a high stored energy, including twins and grain boundaries, and can be represented by an Avrami exponent of n 1 ranging from 0.35 to 0.6. During Stage 2, recrystallization occurred predominately in the interior of deformed grains with incomplete recrystallization generally observed even at annealing times in excess of two weeks. The second recrystallization stage exhibited a much lower Avrami exponent, n 2, ranging from 0.02 to 0.2. Increasing the starting grain size in the pure Mg condition led to a significant delay in recrystallization. The addition of Al had a minimal effect on the recrystallization kinetics of Mg.

Observations and controls on the occurrence of inherited zircon in Concord-type granitoids, New Hampshire

USGS Publications Warehouse

Harrison, T.M.; Aleinikoff, J.N.; Compston, W.

1987-01-01

U-Pb analyses of zircons separated from two Concord-type plutons near Sunapee and Dixville Notch, New Hampshire, reveal differences in the pattern and magnitude of zircon inheritance which are related to differences in melt chemistry. The Sunapee pluton contains only slightly more Zr than required to saturate the melt at the peak temperature of 700 ?? 30??C. Traces of inherited zircon in this separate are inferred to be present as small, largely resorbed grains. In contrast, the Long Mountain pluton, near Dixville Notch, contains about 240% more Zr than required to saturate the melt. Thus, more than half of the Zr existed as stable, inherited zircon crystals during the partial fusion event, consistent with the observation of substantial inheritance in all grain size fractions. Ion probe intra-grain analyses of zircon from the Long Mountain pluton indicate a complex pattern of inheritance with contributions from at least two Proterozoic terrenes and caution against simple interpretations of upper and lower intercepts of chords containing an inherited component. Ion probe analyses of zircons from the Sunapee pluton reveal clear evidence of U loss which results in incorrect apparent conventional U-Pb ages. Ages of crystallization for the Long Mountain and Sunapee pluton are ~350 and 354 ?? 5 Ma, respectively. A Sm/Nd measurement for the Long Mountain pluton yields a depleted mantle model age of 1.5 Ga, consistent with the observed inheritance pattern. In contrast, a Sm/Nd model age for the Sunapee pluton is improbably old due to minor monazite fractionation. ?? 1987.

Experimental and Modeling Characterization of PETN Mobilization Mechanisms During Recrystallization at Ambient Conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burnham, A K; Gee, R; Maiti, A

2005-11-03

Experimental measurements suggest that pentaerythritoltetranitrate (PETN) undergoes changes at the molecular level that cause macroscopic changes in the overall PETN powder characteristics over time. These changes have been attributed to the high molecular mobility of PETN, but the underlying mechanism(s) responsible for this redistribution are still uncertain. Two basic approaches have been implemented in the past year to provide insight into the nature of these underlying mechanisms. The first approach is of an experimental nature, utilizing both AFM and evaporation measurements, which address both surface mobility and evaporation. These data include AFM measurements performed at LLNL and evaporation rate measurementsmore » performed at Texas Tech. These results are compared to earlier vapor pressure measurements performed at SNL, and estimates of recrystallization time frames are given. The second approach utilizes first-principle calculations and simulations that will be used to compare directly to those experimental quantities measured. We are developing an accurate intermolecular potential for PETN, which via kinetic Monte Carlo (KMC) simulations would mimic real crystallite shapes. Once the basic theory is in place for the growth of single crystallites, we will be in a position to investigate realistic grain coarsening phenomena in multi-crystallite simulations. This will also enable us to study how to control the morphological evolution, e.g., through thermal cycling, or through the action of custom additives and impurities.« less

Basic thermal-mechanical properties and thermal shock, fatigue resistance of swaged + rolled potassium doped tungsten

NASA Astrophysics Data System (ADS)

Zhang, Xiaoxin; Yan, Qingzhi; Lang, Shaoting; Xia, Min; Ge, Changchun

2014-09-01

The potassium doped tungsten (W-K) grade was achieved via swaging + rolling process. The swaged + rolled W-K alloy exhibited acceptable thermal conductivity of 159.1 W/m K and ductile-to-brittle transition temperature of about 873 K while inferior mechanical properties attributed to the coarse pores and small deformation degree. Then the thermal shock, fatigue resistance of the W-K grade were characterized by an electron beam facility. Thermal shock tests were conducted at absorbed power densities varied from 0.22 to 1.1 GW/m2 in a step of 0.22 GW/m2. The cracking threshold was in the range of 0.44-0.66 GW/m2. Furthermore, recrystallization occurred in the subsurface of the specimens tested at 0.66-1.1 GW/m2 basing on the analysis of microhardness and microstructure. Thermal fatigue tests were performed at 0.44 GW/m2 up to 1000 cycles and no cracks emerged throughout the tests. Moreover, recrystallization occurred after 1000 cycles.

Thermochronology of the Cornubian batholith in southwest England: Implications for pluton emplacement and protracted hydrothermal mineralization

NASA Astrophysics Data System (ADS)

Chesley, J. T.; Halliday, A. N.; Snee, L. W.; Mezger, K.; Shepherd, T. J.; Scrivener, R. C.

1993-04-01

The metalliferous ore deposits of southwest England are associated with biotite-muscovite granites that intruded upper Paleozoic sediments and volcanic rocks at the end of the Hercynian Orogeny. The hydrothermal mineralization can be subdivided into four stages: (1) exoskarns (2) high-temperature tin and tungsten oxide-bearing sheeted greisen bordered veins and Sn-bearing tourmaline veins and breccias (3) polymetallic quartz-tourmaline-chlorite-sulfide-fluorite-bearing fissure veins, which represent the main episode of economic mineralization (4) late-stage, low-temperature polymetallic fluorite veins. U-Pb dating of monazite and xenotime and 40Ar /39Ar dating of muscovite were used to determine emplacement ages and cooling times for individual plutons within the Cornubian batholith, as well as separate intrusive phases within the plutons. In addition, 40Ar /39Ar ages from hornblende and secondary muscovite and Sm-Nd isochron ages from fluorite were employed to determine the relationship between pluton emplacement and different stages of mineralization. The U-Pb ages indicate that granite magmatism was protracted from ~300 Ma down to ~275 Ma with no evidence of a major hiatus. There is no systematic relation between the age of a pluton and its location within the batholith. The U-Pb ages for separate granite phases within a single pluton are resolvable and indicate that magma emplacement within individual plutons occurred over periods of as much as 4.5 myrs. Felsic porphyry dike emplacement was coeval with plutonism, but continued to ~270 Ma. The geochronologic data suggest that the Cornubian batholith originated from repeated melting events over 30 myrs and was formed by a series of small coalescing granitic bodies. Cooling rates of the main plutons are unrelated to emplacement age, but decrease from the southwest to the northeast from ~210°C myr -1 to ~60°C myr -1 with a mean of 100°C myr -1. These slow cooling rates appear to reflect the addition of heat from multiple intrusive episodes. The mineralization history is distinct for each pluton and ranges from coeval with, to up to 40 myrs younger than the cooling age for the host pluton. Stage 2 mineralization is broadly synchronous with the emplacement of granite magmas, is dominated by fluids expelled during crystallization, and may be repeated by the emplacement of younger magmas within the same pluton. Sm-Nd isochrons for fluorite from stage 3 polymetallic mineralization give ages of 259 ± 7, 266 ± 3 and 267 ± 12 Ma, postdating stage 2 mineralization by up to 25 myrs within the same deposit. The similarity in age of the main polymetallic mineralization hosted by the oldest and youngest plutons, suggests that this stage of mineralization is unlikely to be related to hydrothermal circulation driven by the emplacement and cooling of the host granite. The mineralization is more likely the product of regional hydrothermal circulation driven by heat from the emplacement and crystallization of younger buried pulses of magma.

Thermochronology of the Cornubian batholith in southwest England: Implications for pluton emplacement and protracted hydrothermal mineralization

USGS Publications Warehouse

Chesley, J.T.; Halliday, A.N.; Snee, L.W.; Mezger, K.; Shepherd, T.J.; Scrivener, R.C.

1993-01-01

The metalliferous ore deposits of southwest England are associated with biotite-muscovite granites that intruded upper Paleozoic sediments and volcanic rocks at the end of the Hercynian Orogeny. The hydrothermal mineralization can be subdivided into four stages: 1. (1) exoskarns 2. (2) high-temperature tin and tungsten oxide-bearing sheeted greisen bordered veins and Sn-bearing tourmaline veins and breccias 3. (3) polymetallic quartz-tourmaline-chlorite-sulfide-fluorite-bearing fissure veins, which represent the main episode of economic mineralization 4. (4) late-stage, low-temperature polymetallic fluorite veins. U-Pb dating of monazite and xenotime and 40Ar 39Ar dating of muscovite were used to determine emplacement ages and cooling times for individual plutons within the Cornubian batholith, as well as separate intrusive phases within the plutons. In addition, 40Ar 39Ar ages from hornblende and secondary muscovite and Sm-Nd isochron ages from fluorite were employed to determine the relationship between pluton emplacement and different stages of mineralization. The U-Pb ages indicate that granite magmatism was protracted from ~300 Ma down to ~275 Ma with no evidence of a major hiatus. There is no systematic relation between the age of a pluton and its location within the batholith. The U-Pb ages for separate granite phases within a single pluton are resolvable and indicate that magma emplacement within individual plutons occurred over periods of as much as 4.5 myrs. Felsic porphyry dike emplacement was coeval with plutonism, but continued to ~270 Ma. The geochronologic data suggest that the Cornubian batholith originated from repeated melting events over 30 myrs and was formed by a series of small coalescing granitic bodies. Cooling rates of the main plutons are unrelated to emplacement age, but decrease from the southwest to the northeast from ~210??C myr-1 to ~60??C myr-1 with a mean of 100??C myr-1. These slow cooling rates appear to reflect the addition of heat from multiple intrusive episodes. The mineralization history is distinct for each pluton and ranges from coeval with, to up to 40 myrs younger than the cooling age for the host pluton. Stage 2 mineralization is broadly synchronous with the emplacement of granite magmas, is dominated by fluids expelled during crystallization, and may be repeated by the emplacement of younger magmas within the same pluton. Sm-Nd isochrons for fluorite from stage 3 polymetallic mineralization give ages of 259 ?? 7, 266 ?? 3 and 267 ?? 12 Ma, postdating stage 2 mineralization by up to 25 myrs within the same deposit. The similarity in age of the main polymetallic mineralization hosted by the oldest and youngest plutons, suggests that this stage of mineralization is unlikely to be related to hydrothermal circulation driven by the emplacement and cooling of the host granite. The mineralization is more likely the product of regional hydrothermal circulation driven by heat from the emplacement and crystallization of younger buried pulses of magma. ?? 1993.

Publications - PDF 96-18 | Alaska Division of Geological & Geophysical

Science.gov Websites

content DGGS PDF 96-18 Publication Details Title: Major and trace element analyses of Cretaceous plutonic Bibliographic Reference Newberry, R.J., 1996, Major and trace element analyses of Cretaceous plutonic rocks in pdf1996_018.pdf (571.0 K) Keywords Geochemistry; Geology; Igneous Rocks; Major Oxides; Plutonic Rocks

PRECIPITATION OF PLUTONOUS PEROXIDE

DOEpatents

Barrick, J.G.; Manion, J.P.

1961-08-15

A precipitation process for recovering plutonium values contained in an aqueous solution is described. In the process for precipitating plutonium as plutonous peroxide, hydroxylamine or hydrazine is added to the plutoniumcontaining solution prior to the addition of peroxide to precipitate plutonium. The addition of hydroxylamine or hydrazine increases the amount of plutonium precipitated as plutonous peroxide. (AEC)

Recrystallization of polycrystalline silicon

NASA Technical Reports Server (NTRS)

Lall, C.; Kulkarni, S. B.; Graham, C. D., Jr.; Pope, D. P.

1981-01-01

Optical metallography is used to investigate the recrystallization properties of polycrystalline semiconductor-grade silicon. It is found that polycrystalline silicon recrystallizes at 1380 C in relatively short times, provided that the prior deformation is greater than 30%. For a prior deformation of about 40%, the recrystallization process is essentially complete in about 30 minutes. Silicon recrystallizes at a substantially slower rate than metals at equivalent homologous temperatures. The recrystallized grain size is insensitive to the amount of prestrain for strains in the range of 10-50%.

Dextral strike-slip along the Kapıdağ shear zone (NW Turkey): evidence for Eocene westward translation of the Anatolian plate

NASA Astrophysics Data System (ADS)

Türkoğlu, Ercan; Zulauf, Gernold; Linckens, Jolien; Ustaömer, Timur

2016-10-01

The northern part of the Kapıdağ Peninsula (Marmara Sea, NW Turkey) is affected by the E-W trending Kapıdağ shear zone, which cuts through calc-alkaline granitoids of the Ocaklar pluton resulting in mylonitic orthogneiss. Macroscopic and microscopic shear-sense indicators, such as SC fabrics, shear bands, σ-clasts and mica fish, unequivocally suggest dextral strike-slip for the Kapıdağ shear zone. Based on petrographic data, deformation microfabrics of quartz and feldspar, and the slip systems in quartz, the dextral shearing should have been active at T = 500-300 °C and P < 5 kbar. Published K-Ar and 39Ar-40Ar cooling ages of hornblende and biotite suggest that cooling below 500-300 °C occurred during the Eocene (ca. 45-ca. 35 Ma), meaning that the Kapıdağ shear zone should have been active during Middle to Late Eocene times. The differential stress related to the shearing was <50 MPa as is indicated by the size of recrystallized quartz grains. Based on the new and published data, it is concluded that the westward movement of the Anatolian plate might have been active almost continuously from the Middle Eocene until recent times.

Petrology of Aztec Wash pluton, Eldorado Mountains, southern Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Falkner, C.M.; Miller, C.F.; Wooden, J.L.

1993-04-01

Aztec Wash pluton, a 50 km[sup 2] intrusive complex in the northern Eldorado Mountains, was emplaced ca. 16 Ma (Faulds et al., 1990) during extension within the Colorado River Corridor. The pluton displays extreme compositional variability, ranging from olivine gabbro (ca. 50 wt% SiO[sub 2]) to highly evolved aplite (76% SiO[sub 2]). Most of the intrusion is medium grained, homogeneous granite (ca. 72% SiO[sub 2]), but 1/3 is highly heterogeneous and dominated by mafic to intermediate rocks; a 6 [times] 3km, N-S mafic zone almost bisects the pluton. Well-displayed magma mingling and late mafic and felsic dikes verify the coexistencemore » of mafic and felsic melts. Hornblende barometry indicates that the entire exposed portion of Aztec Wash pluton was emplaced at very shallow depth (« less

The distribution, geochronology and geochemistry of early Paleozoic granitoid plutons in the North Altun orogenic belt, NW China: Implications for the petrogenesis and tectonic evolution

NASA Astrophysics Data System (ADS)

Meng, Ling-Tong; Chen, Bai-Lin; Zhao, Ni-Na; Wu, Yu; Zhang, Wen-Gao; He, Jiang-Tao; Wang, Bin; Han, Mei-Mei

2017-01-01

Abundant early Paleozoic granitoid plutons are widely distributed in the North Altun orogenic belt. These rocks provide clues to the tectonic evolution of the North Altun orogenic belt and adjacent areas. In this paper, we report an integrated study of petrological features, U-Pb zircon dating, in situ zircon Hf isotope and whole-rock geochemical compositions for the Abei, 4337 Highland and Kaladawan Plutons from north to south in the North Altun orogenic belt. The dating yielded magma crystallization ages of 514 Ma for the Abei Pluton, 494 Ma for the 4337 Highland Pluton and 480-460 Ma for the Kaladawan Pluton, suggesting that they are all products of oceanic slab subduction because of the age constraint. The Abei monzogranites derived from the recycle of Paleoproterozoic continental crust under low-pressure and high-temperature conditions are products of subduction initiation. The 4337 Highland granodiorites have some adakitic geochemical signatures and are sourced from partial melting of thickened mafic lower continental crust. The Kaladawan quartz diorites are produced by partial melting of mantle wedge according to the positive εHf(t) values, and the Kaladawan monzogranite-syenogranite are derived from partial melting of Neoproterozoic continental crust mixing the juvenile underplated mafic material from the depleted mantle. These results, together with existing data, provide significant information about the evolution history of oceanic crust subduction during the 520-460 Ma. The initiation of subduction occurred during 520-500 Ma with formation of Abei Pluton; subsequent transition from steep-angle to flat-slab subduction at ca.500 Ma due to the arrival of buoyant oceanic plateaus, which induces the formation of 4337 Highland Pluton. With ongoing subduction, the steep-angle subduction system is reestablished to cause the formation of 480-460 Ma Kaladawan Pluton. Meanwhile, it is this model that account for the temporal-spatial distribution of these early Paleozoic magmatic rocks in the North Altun orogenic belt.

Petrogenesis of the reversely-zoned Turtle pluton, southeastern California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, C.M.

1989-01-01

Few plutons with a reversed geometry of a felsic rim and mafic core have been described in the geologic literature. The Turtle pluton of S.E. California is an intrusion composed of a granitic rim and granodioritic core and common microgranitoid enclaves. Field observations, mineral textures and chemistries, major and trace element geochemistry, and isotopic variability support a petrogenetic model of in situ, concomitant, magma mixing and fractional crystallization of rhyolitic magma progressively mixed with an increasing volume of andesitic magma, all without chemical contribution from entrained basaltic enclaves. Hornblende geobarometry indicates the Turtle pluton crystallized at about 3.5 kb. Amore » crystallization sequence of biotite before hornblende (and lack of pyroxenes) suggests the initial granitic magma contained less than 4 wt% H{sub 2}O at temperatures less than 780C. U-Pb, Pb-Pb, Rb-Sr and oxygen isotope studies indicate the terrane intruded by the Turtle pluton is 1.8 Ga, that the Turtle pluton crystallized at 130 Ma, that the Target Granite and garnet aplites are about 100 Ma, and that these intrusions were derived from different sources. Models based on isotopic data suggest the rhyolitic end member magma of the Turtle pluton was derived from mafic igneous rocks, and was not derived from sampled Proterozoic country rocks. Similarity of common Sr and Pb isotopic ratios of these rocks to other Mesozoic intrusions in the Colorado River Region suggest the Turtle pluton and Target Granite have affinities like rocks to the east, including the Whipple Mountains and plutons of western Arizona. P-T-t history of the southern Turtle Mountains implies uplift well into the upper crust by Late Cretaceous time so that the heating and deformation events of the Late Cretaceous and Tertiary observed in flanking ranges did not affect the study area.« less

An early extensional event of the South China Block during the Late Mesozoic recorded by the emplacement of the Late Jurassic syntectonic Hengshan Composite Granitic Massif (Hunan, SE China)

NASA Astrophysics Data System (ADS)

Wei, Wei; Chen, Yan; Faure, Michel; Martelet, Guillaume; Lin, Wei; Wang, Qingchen; Yan, Quanren; Hou, Quanlin

2016-03-01

Continental scaled extension is the major Late Mesozoic (Jurassic and Cretaceous) tectonic event in East Asia, characterized by faulting, magmatic intrusions and half-grabens in an area with a length of > 5000 km and a width of > 1000 km. Numerous studies have been conducted on this topic in the South China Block (SCB), However, the space and time ranges of the compressional or extensional regimes of the SCB during the Jurassic are still unclear, partly due to the lack of structural data. The emplacement fabrics of granitic plutons can help determine the regional tectonic background. In this study, a multidisciplinary approach, including Anisotropy of Magnetic Susceptibility (AMS), macro and microstructural analyses, quartz c-axis preferred orientation, gravity modeling and monazite EPMA dating, was conducted on the Hengshan composite granitic massif in SCB that consists of the Triassic Nanyue biotite granitic pluton and the Late Jurassic Baishifeng two-mica granitic pluton. The magnetic fabrics are characterized by a consistent NW-SE oriented lineation and weakly inclined foliation. A dominant high temperature deformation with a top-to-the-NW shear sense is identified for both plutons. The deformation increasing from the center of the Baishifeng pluton to its western border is associated to the development of the West Hengshan Boundary Fault (WHBF). The gravity modeling shows a ;saw tooth-shaped; NE-SW oriented structure of the Baishifeng pluton, which may be considered as NE-SW oriented tension-gashes formed due to the NW-SE extension. All results show that the Triassic Nanyue pluton was deformed under post-solidus conditions by the WHBF coeval with the emplacement of the Late Jurassic Baishifeng pluton. All these observations comply with the NW-SE extensional tectonics coeval with the emplacement of the Baishifeng pluton, which argues that the NW-SE crustal stretching started since the Late Jurassic, at least in this part of the SCB.

Geochemistry, petrology and geodynamic setting of the Urumieh plutonic complex, Sanandaj-Sirjan zone, NW Iran: New implication for Arabian and Central Iranian plate collision

NASA Astrophysics Data System (ADS)

Jafari, Amin; Fazlnia, Abdolnaser; Jamei, Susan

2018-03-01

The Urumieh plutonic complex, in the northernmost part of Sanandaj-Sirjan zone (SSZ) of Iran, consists of ten basic-acidic units which formed in response to subduction and continental collision of the SSZ with the Arabian plate to the south during Mid-Late Cretaceous times. Geochemically, the plutonic unit is divided into three distinct groups: I-type, S-type and A-type that mainly belong to calc-alkalic series. The I-type intrusions, especially mafic members, are enriched in LREE and LILE and possibly formed from metasomatized mantle wedge during the subduction of the Neo-Tethys oceanic crust beneath the SSZ. The felsic I-type rocks are depleted in Ba, Sr, Nb, Ta, Ti and Eu, but enriched in Rb, Th, K, Ce, U and La. These data suggest that they formed in deep crustal levels via partial melting of crustal sources by injection of hot mantle magmas. The S-type rocks are characterized by low Na2O (<3.02 wt%), high LILE, relatively high values of molar Al2O3/(MgO+FeO) and K2O/Na2O ratios combined with low CaO/(MgO+FeO*) ratios. These features show that the S-type granites originated from partial melting of a metapelitic to metagreywacke source. The A-type alkali feldspar granites formed through the slab break off after the continental collision in northwestern Iran by decompression melting of crustal protolith. The author's new model implies that collision between Arabian margin and north SSZ initiated in the Late Cretaceous and completed until Late Paleocene. In contrast, in the southeast, subduction was active during this period of time, but collision presumably occurred during the Middle to Late Miocene.

Age and petrogenesis of the Diana Complex, Adirondack Mountains, New York

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grant, N.; Yang, Yingping; Cliff, R.

1992-01-01

U-Pb zircon data show that the Diana Complex was emplaced 1152[plus minus]12 Ma ago along the Carthage-Colton Mylonite Zone (CCMZ), that marks the boundary between the Adirondack Highlands and the Lowlands. The tectonic setting of the Complex is uncertain because granitoid plutons of the same age were emplaced under syntectonic conditions in the Lowlands, while in the Highlands the same plutons have been viewed as anorogenic. Deformation focused on the CCMZ is reflected in whole-rock Rb-Sr isochron age of 1038[plus minus]97 Ma for the Complex. This resetting is typical of granitoid plutons within a 10 km-wide zone across the CCMZ,more » but is absent outside this zone elsewhere in the Lowlands. Although the chemical continuity of the Complex with Adirondack mafic rocks of the same presumed age demonstrates that crystal fractionation from a basic parent was a likely origin for the Complex, it is probable the magmas were modified by crustal assimilation. For example, the initial [sup 87]Sr/[sup 86]Sr[sub 1152] values for the Complex (0.7042[plus minus]3) are higher than the same ratios for Adirondack mafic rocks (0.7033[plus minus]6), and one zircon fraction lies to the right of the discordia defined by the other four analyzed fractions. The nature and age of the assimilant may be constrained by a metasedimentary xenolith with a whole-rock Rb-Sr isochron age of 1318[plus minus]15 Ma. Changes in TiO[sub 2] and P[sub 2]O[sub 5] abundances and La/Yb values indicate that the crystallization of both accessory (e.g., Fe-Ti oxides, apatite and zircon) and silicate phases were important in the fractionation of the Diana Complex syenites.« less

Plutonic rocks in the Mineoka-Setogawa ophiolitic mélange, central Japan: Fragments of middle to lower crust of the Izu-Bonin-Mariana Arc?

NASA Astrophysics Data System (ADS)

Ichiyama, Yuji; Ito, Hisatoshi; Hokanishi, Natsumi; Tamura, Akihiro; Arai, Shoji

2017-06-01

A Paleogene accretionary complex, the Mineoka-Setogawa Belt, is distributed around the Izu Collision Zone, central Japan. Plutonic rocks of gabbro, diorite and tonalite compositions are included as fragments and dykes in an ophiolitic mélange in this belt. Zircon U-Pb dating of the plutonic rocks indicates that they were formed at ca. 35 Ma simultaneously. These ages are consistent with Eocene-Oligocene tholeiite and calc-alkaline arc magmatism in the Izu-Bonin-Mariana (IBM) Arc and exclude several previous models for the origin of the Mineoka-Setogawa ophiolitic rocks. The geochemical characteristics of these plutonic rocks are similar to those of the Eocene-Oligocene IBM tholeiite and calc-alkaline volcanic rocks as well as to the accreted middle crust of the IBM Arc, the Tanzawa Plutonic Complex. Moreover, their lithology is consistent with those of the middle and lower crust of the IBM Arc estimated from the seismic velocity structure. These lines of evidence strongly indicate that the plutonic rocks in the Mineoka-Setogawa ophiolitic mélange are fragments of the middle to lower crust of the IBM Arc. Additionally, the presence of the Mineoka-Setogawa intermediate to felsic plutonic rocks supports the hypothesis that intermediate magma can form continental crust in intra-oceanic arcs.

Depositional features and stratigraphic sections in granitic plutons: implications for the emplacement and crystallization of granitic magma

NASA Astrophysics Data System (ADS)

Wiebe, R. A.; Collins, W. J.

1998-09-01

Many granitic plutons contain sheet-like masses of dioritic to gabbroic rocks or swarms of mafic to intermediate enclaves which represent the input of higher temperature, more mafic magma during crystallization of the granitic plutons. Small-scale structures associated with these bodies (e.g. load-cast and compaction features, silicic pipes extending from granitic layers into adjacent gabbroic sheets) indicate that the sheets and enclave swarms were deposited on a floor of the magma chamber (on granitic crystal mush and beneath crystal-poor magma) while the mafic magma was incompletely crystallized. These structures indicate 'way up', typically toward the interior of the intrusions, and appear to indicate that packages of mafic sheets and enclave concentrations in these plutons are a record of sequential deposition. Hence, these plutons preserve a stratigraphic history of events involved in the construction (filling, replenishment) and crystallization of the magma chamber. The distinctive features of these depositional portions of plutons allow them to be distinguished from sheeted intrusions, which usually preserve mutual intrusive contacts and 'dike-sill' relations of different magma types. The considerable thickness of material that can be interpreted as depositional, and the evidence for replenishment, suggest that magma chamber volumes at any one time were probably much less than the final size of the pluton. Thus, magma chambers may be constructed much more slowly than presently envisaged. The present steep attitudes of these structures in many plutons may have developed gradually as the floor of the chamber (along with the underlying solidified granite and country rock) sank during continuing episodes of magma chamber replenishment. These internal magmatic structures support recent suggestions that the room problem for granites could be largely accommodated by downward movement of country rock beneath the magma chamber.

Insights into the emplacement of upper-crustal plutons and their relationship to large silicic calderas, from field relationships, geochronology, and zircon trace element geochemistry in the Stillwater - Clan Alpine caldera complex, western Nevada, USA

NASA Astrophysics Data System (ADS)

Colgan, Joseph P.; John, David A.; Henry, Christopher D.; Watts, Kathryn E.

2018-01-01

Geologic mapping, new U-Pb zircon ages, and new and published 40Ar/39Ar sanidine ages document the timing and extent of Oligocene magmatism in the southern Stillwater Range and Clan Alpine Mountains of western Nevada, where Miocene extension has exposed at least six nested silicic calderas and underlying granitic plutons to crustal depths locally ≥ 9 km. Both caldera-forming rhyolitic tuffs and underlying plutons were emplaced in two episodes, one from about 30.4-28.2 Ma that included the Deep Canyon, Job Canyon, and Campbell Creek calderas and underlying plutons, and one from about 25.3-24.8 Ma that included the Louderback Mountains, Poco Canyon, and Elevenmile Canyon calderas and underlying plutons. In these two 1-2 m.y. periods, almost the entire Mesozoic upper crust was replaced by Oligocene intrusive and extrusive rocks to depths ≥ 9 km over an estimated total area of 1500 km2 (pre-extension). Zircon trace element geochemistry indicates that some plutonic rock can be solidified residual magma from the tuff eruptions. Most plutons are not solidified residual magma, although they directly underlie calderas and were emplaced along the same structures shortly after to as much as one million years after caldera formation. Magma chambers and plutons grew by floor subsidence accommodated by downward transfer of country rocks. If other Great Basin calderas are similar, the dense concentration of shallowly exposed calderas in central Nevada is underlain by a complexly zoned mid-Cenozoic batholith assembled in discrete pulses that coincided with formation of large silicic calderas up to 2500-5000 km3.

Structural development of an Archean Orogen, Western Point Lake, Northwest Territories

NASA Astrophysics Data System (ADS)

Kusky, Timothy M.

1991-08-01

The Point Lake orogen in the central Archean Slave Province of northwestern Canada preserves more than 10 km of structural relief through an eroded antiformal thrust stack and deeper anastomosing midcrustal mylonites. Fault restoration along a 25 km long transect requires a minimum of 69 km slip and 53 km horizontal shortening. In the western part of the orogen the basal decollement places mafic plutonic/volcanic rocks over an ancient tonalitic gneiss complex. Ten kilometers to the east in the Keskarrah Bay area, slices of gneiss unroofed on brittle thrusts shed molasse into several submerged basins. Conglomerates and associated thinly bedded sedimentary rocks are interpreted as channel, levee, and overbank facies of this thrust-related sedimentary fan system. The synorogenic erosion surface at the base of the conglomerate truncates premetamorphic or early metamorphic thrust faults formed during foreland propagation, while other thrusts related to hinterland-progressing imbrication displace this unconformity. Tightening of synorogenic depositional troughs resulted in the conglomerates' present localization in synclines to the west of associated thrust faults and steepening of structural dips. Eastern parts of the orogen consist of isoclinally folded graywackes composed largely of Mutti and Ricci-Lucchi turbidite facies B, C, and D, interpreted as submarine fan deposits eroded from a distant volcanic arc. Thrust faults in the metasedimentary terrane include highly disrupted slate horizons with meter-scale duplex structures, and recrystallized calcmylonites exhibiting sheath folds and boudin trains with very large interboudin distances. The sequence of fabric development and the overall geometry of this metasedimentary terrane strongly resembles younger forearc accretionary prisms. Conditions of deformation along the thrusts parallel the regional metamorphic zonation: amphibolite facies in the basal decollement through greenschist facies shear zones to cataclastic crush zones in the region of emergent thrusts in Keskarrah Bay. Depth differences can account for only half of the metamorphic gradient; thermal profiles which increased downwards in obducted greenstone belts and synthrusting plutonism explains other high metamorphic gradients. A tectonic model involving the collision of an accretionary prism with a continental margin best explains the structural and sedimentological evolution of the orogen.

Minor elements in magnetic concentrates from the Syenite-Shonkinite Province, southern Asir, Kingdom of Saudi Arabia

USGS Publications Warehouse

Overstreet, W.C.; Day, G.W.; Botinelly, Theodore; VanTrump, George

1987-01-01

Magnetic concentrates from 106 localities in three plutons of syenite and one pluton of shonkinite in the southern Asir were analyzed spectrographically for 31 elements to determine if anomaly-enhancement techniques would identify mineralization not disclosed by conventional geochemical sample media. Positive anomalies are lacking for all elements except vanadium. Vanadium contents as high as 0.7 percent were identified in magnetic concentrates from the syenite pluton to the southeast of Suq al Ithnayn, but magnetite is sparse. This observation indicates a need to reexamine magnetite-rich drill core for possible ore-grade tenors in vanadium from the zoned pluton at Lakathah. Experimental analyses for platinum-group metals in magnetic concentrates from layered mafic plutons at Jabal Sha'i', Jabal al Ashshar, and Hishshat al Hawi should be performed to determine whether micron-size particles of the platinum-group metals are present in mafic rocks of the Arabian Shield.

Earth's youngest exposed granite and its tectonic implications: the 10-0.8 Ma Kurobegawa Granite.

PubMed

Ito, Hisatoshi; Yamada, Ryuji; Tamura, Akihiro; Arai, Shoji; Horie, Kenji; Hokada, Tomokazu

2013-01-01

Although the quest for Earth's oldest rock is of great importance, identifying the youngest exposed pluton on Earth is also of interest. A pluton is a body of intrusive igneous rock that crystallized from slowly cooling magma at depths of several kilometers beneath the surface of the Earth. Therefore, the youngest exposed pluton represents the most recent tectonic uplift and highest exhumation. The youngest exposed pluton reported to date is the Takidani Granodiorite (~ 1.4 Ma) in the Hida Mountain Range of central Japan. Using LA-ICP-MS and SHRIMP U-Pb zircon dating methods, this study demonstrates that the Kurobegawa Granite, also situated in the Hida Mountain Range, is as young as ~ 0.8 Ma. In addition, data indicate multiple intrusion episodes in this pluton since 10 Ma with a ~ 2-million-year period of quiescence; hence, a future intrusion event is likely within 1 million years.

Earth's youngest exposed granite and its tectonic implications: the 10–0.8 Ma Kurobegawa Granite

PubMed Central

Ito, Hisatoshi; Yamada, Ryuji; Tamura, Akihiro; Arai, Shoji; Horie, Kenji; Hokada, Tomokazu

2013-01-01

Although the quest for Earth's oldest rock is of great importance, identifying the youngest exposed pluton on Earth is also of interest. A pluton is a body of intrusive igneous rock that crystallized from slowly cooling magma at depths of several kilometers beneath the surface of the Earth. Therefore, the youngest exposed pluton represents the most recent tectonic uplift and highest exhumation. The youngest exposed pluton reported to date is the Takidani Granodiorite (~ 1.4 Ma) in the Hida Mountain Range of central Japan. Using LA-ICP-MS and SHRIMP U-Pb zircon dating methods, this study demonstrates that the Kurobegawa Granite, also situated in the Hida Mountain Range, is as young as ~ 0.8 Ma. In addition, data indicate multiple intrusion episodes in this pluton since 10 Ma with a ~ 2-million-year period of quiescence; hence, a future intrusion event is likely within 1 million years. PMID:23419636

Relationships between subduction and extension in the Aegean region: evidence from granite plutons of the Biga Peninsula, NW Turkey

NASA Astrophysics Data System (ADS)

Black, K. N.; Catlos, E. J.; Oyman, T.; Demirbilek, M.

2012-04-01

The Biga Peninsula is a tectonically complex region in western Turkey characterized by Tethyan sutures overprinted by extensional grabens, active fault strands of the North Anatolian Shear Zone, and numerous granitoid plutons. Two end-member models for the initiation of extension in the Biga region have been proposed, both of which focus on the role of igneous assemblages. The first model involves the emplacement of a hot mantle plume that thins and weakens crust and isostatic doming drives extension. The second has regional tensional stresses as the driving force, and magmatism is a consequence of decompression. Here we focus on understanding the timing and geochemical evolution of three granitoid plutons located in and just south of the Biga Peninsula to understand which end-member model could be applicable to the Aegean region. The Kestanbolu pluton is located north of the proposed Vardar Suture Zone, whereas the Eybek and Kozak plutons are north of the Izmir-Ankara Suture Zone. These sutures may mark regions of the closure of branches of the NeoTethyan Ocean. To better understand their sources and tectonic evolution, we acquired geochemical and geochronological data, and cathodoluminescence (CL) images of the rocks. Previously reported ages of the plutons range from Late Eocene to Middle Miocene. Here we acquired in situ (in thin section) ion microprobe U-Pb ages of zircon grains found in a range of textural relationships. Ages from the Kozak pluton range from 37.8±5.4 Ma to 10.3±2.4 Ma (238U/206Pb, ±1σ) with two ages from a single grain of 287±26 Ma and 257±18 Ma. We also found Oligocene to Late Miocene zircon grains in the Kestanbolu pluton, whereas zircons from the Eybek pluton range from 34.3±4.8 Ma to 21.2±1.7 Ma. Samples collected from the Kozak and Eybek plutons are magnesian, calc-alkalic, and metaluminous, whereas the Kestanbolu rocks are magnesian, alkali-calcic, and metaluminous with one ferroan sample and one peraluminous sample. Trace element data suggest the Kozak and Kestanbolu plutons have a volcanic arc source, whereas the Eybek pluton is syn-collisional. CL imagery documents a complex history of these granites including magma mixing, multiple episodes of brittle deformation, and fluid alteration. Microveins, microcracks, and myrmekite textures are present, indicating brittle deformation and fluid alteration. Plagioclase grains display a range of compositional zoning and some show distinctly cracked cores that are evidence of magma mixing. The Kozak, Eybek and Kestanbolu plutons may be sourced from the melting of the subducting Mediterranean oceanic crust with a contribution from the overlying Eurasian continental crust. These granites intruded into the Vardar and/or Izmir-Ankara Sutures, entraining the Permian zircon grain. The Oligocene zircon ages are consistent with magmatism propagating from north to south in the Aegean region, whereas the Late Miocene results are consistent with ongoing extension throughout the region at this time. In this scenario, slowing subduction along the Hellenic arc led to the formation of extensional structures that provided space for the accommodation of these magma bodies.

Geochemistry of Mesozoic plutons, southern Death Valley region, California: Insights into the origin of Cordilleran interior magmatism

USGS Publications Warehouse

Ramo, O.T.; Calzia, J.P.; Kosunen, P.J.

2002-01-01

Mesozoic granitoid plutons in the southern Death Valley region of southeastern California reveal substantial compositional and isotopic diversity for Mesozoic magmatism in the southwestern US Cordillera. Jurassic plutons of the region are mainly calc-alkaline mafic granodiorites with ??Ndi of -5 to -16, 87Sr/86Sri of 0.707-0.726, and 206Pb/204Pbi of 17.5-20.0. Cretaceous granitoids of the region are mainly monzogranites with ??Ndi of -6 to -19, 87Sr/86Sri of 0.707-0.723, and 206Pb/204Pbi of 17.4-18.6. The granitoids were generated by mixing of mantle-derived mafic melts and pre-existing crust - some of the Cretaceous plutons represent melting of Paleoproterozoic crust that, in the southern Death Valley region, is exceptionally heterogeneous. A Cretaceous gabbro on the southern flank of the region has an unuasually juvenile composition (??Ndi -3.2, 87Sr/86Sri 0.7060). Geographic position of the Mesozoic plutons and comparison with Cordillera plutonism in the Mojave Desert show that the Precambrian lithosphere (craton margin) in the eastern Mojave Desert region may consists of two crustal blocks separated by a more juvenile terrane.

Reconnaissance guidelines for gold exploration in Central Alaska

USGS Publications Warehouse

Light, T.D.; Moll, S.H.; Bie, S.W.; Lee, G.K.

1993-01-01

Distribution of more than 300 gold-bearing samples from the Livengood (Tolovana) and parts of the Fairbanks and Rampart mining districts in central Alaska, USA, indicate that the concentration of gold in placers is spatially related both to structural features and to Late Cretaceous and (or) Tertiary felsic plutons. The regional consistency of these spatial relationships is demonstrated by proximity analysis using a Geographic Information System (GIS), and suggests a genetic association between faults, felsic plutons, and gold occurrences. The local presence of gold within several of the plutons indicates that these are the source of some of the gold. In addition, some gold occurs proximal to faults where plutons are not present, suggesting that some of the gold was also derived from the country rock. We envision a model whereby weakly mineralized solutions, thermally driven by latent plutonic heat, were enriched by circulation through clastic units that may have had a naturally elevated gold background. The resultant enriched solutions were channeled and reconcentrated along or adjacent to large-scale fault systems. Future exploration to define individual target areas should be directed toward areas where Late Cretaceous and (or) Tertiary felsic plutons occur near major faults. ?? 1993.

Magmatic apatite - a window into melt evolution of the Dalgety pluton.

NASA Astrophysics Data System (ADS)

Pope, M. D.; Tailby, N.; Webster, J. D.

2017-12-01

The Dalgety Pluton is located in the Lachlan Fold Belt in southeastern Australia, and is a coarse grained, peraluminous, S-type, biotite granodiorite. Historically, pluton emplacement has been thought of as cooling from a single, large body of magma over a geologically quick period. Current studies suggest issues with this model and propose a slower, incremental model of emplacement in some settings (Glazner et al., 2004). This work proposes that the emplacement of the Dalgety Pluton occurred in incremental phases demonstrated through halogen, minor, and trace element concentrations in apatites. Apatites from 13 samples collected along a north-south transect of the pluton were analyzed using a 5-spectrometer Cameca SX-100 calibrated for seventeen elements (F, Na, Cl, P, Mg, Al, Si, Ca, S, K, Ti, Mn, Fe, Sr, Ba, La, and Ce) at the American Museum of Natural History. The majority of apatites are fluorapatites, having >50 % F, <15 % Cl, and <25 % OH (calculated from Ketchum et al., 2015). However, the concentrations of the halogens vary throughout the pluton with the highest Cl concentrations near the southern edge. Two of the minor elements, Mn and Fe, also show distinct variation with the lowest concentrations being 0.35 wt% in Mn and 0.25 wt% in Fe and the highest being 1.10 wt% and 0.95 wt%, respectively. Trace elements Ce and La vary as well with their highest concentrations being 0.29 wt% and 0.11 wt% and their lowest for both being below the detection limit of the electron probe. Elemental variation across the pluton is seen in the concentration of minor elements and halogens with a sharp increases at 10,000 meters and again at 21,000 meters from the southern rim of the pluton. Similar shifts in concentration are also seen in the trace elements, however the concentrations decrease at these distances. These wholesale elemental fluctuations in composition are indicative of a dramatic shift in melt composition supporting the hypothesis of multiple melt injection in the Dalgety Pluton. Reference: Glazner, A.F., Bartley, J.M., Coleman, D.S., Gray, W. and Taylor, R.Z., 2004. Are plutons assembled over millions of years by amalgamation from small magma chambers?. GSA today, 14(4/5), pp.4-12.

Petrogenesis of Mesoproterozoic granitic plutons, eastern Llano Uplift, central Texas, USA

NASA Astrophysics Data System (ADS)

Smith, R. K.; Gray, Walt; Gibbs, Tyson; Gallegos, M. A.

2010-08-01

The Llano Uplift of central Texas is a gentle structural dome exposing ˜ 1370 to 1230 Ma metaigneous and metasedimentary rocks of Grenville affinity along the southern margin of Laurentia. The metamorphic rocks were subsequently intruded by ˜ 1119 to 1070 Ma late syn- to post-tectonic granites collectively known as the Town Mountain Granite (TMG). The eastern most of the TMG, the Marble Falls (MF), Kingsland (KL), and Lone Grove (LG) plutons, are metaluminous to marginally peraluminous, high-K, calc-alkaline, ferroan, biotite-calcic amphibole granites [Fe/(Fe + Mg) = 0.71-0.92 and 0.78-0.91 for biotite and calcic amphibole, respectively] displaying distinct variation trends with increasing silica content. They are chemically and texturally zoned and have mineralogical and chemical characteristics similar to A-type granites; i.e., 1) Fe-rich biotites, calcic amphiboles, accessory fluorite, and sporadic rapakivi texture, 2) high K 2O (> 4 wt.%), 3) low Al 2O 3 (< 16 wt.%) and CaO (< 3 wt.%), 4) high Fe/(Fe + Mg), 5) enrichments in Zr, Nb, REE, Ga/Al, and 6) depleted Eu. However, in contrast to typical A-type granites (having low Sr and Ba) the MF, KL,and LG plutons are enriched in Sr and Ba; i.e., up to 229 ppm and 1090 ppm, respectively. On granite discrimination diagrams [(K 2O + Na 2O)/CaO vs. Zr + Nb + Ce + Y (ppm) and Zr (ppm) vs. Ga/Al*10,000] the KL and MF plutons plot within the A-type field, whereas the LG pluton compositions are divided between A-type and fractionated granite fields (I-, S- and M-types). On tectonic discrimination diagrams (Y vs. Nb ) the MF and KL granites plot in the "within-plate" granite field, but the LG pluton plots across several fields including "within-plate" and "volcanic arc plus syn-collisional" fields. Consequently the tectonic classification on a geochemical basis for the LG pluton is unclear. Based on thermal metamorphic mineral assemblages, normative Q-Ab-Or plots, and Q-Ab-Or-H 2O experimental data (Johannes and Holtz, 1996), crystallization temperatures and pressures are estimated to range from 750 to 850 °C and 200 to 500 MPa, respectively. The assemblage of titanite + magnetite + quartz suggests crystallization at low fO2 [confirmed by Fe/(Fe + Mg) vs. [4] Al microprobe analyses of calcic amphibole] and a water content of less than 1.5 wt.% (Wones, 1989). Like other Town Mountain-type plutons, the MF, KL, and LG granites display comparable iron contents at similar alkali and silica enrichments. Melting models (Ba vs. Sr) suggest the MF, KL, and LG plutons may have evolved from the partial melting (anatexis) of juvenile, tonalitic, lower crustal rocks, followed by plagioclase and pyroxene dominated fractionation. Nd isotopic data for the MF pluton ( ɛNd = + 3.4 at 1.06 Ga; Patchett and Ruiz, 1989) and whole-rock δ18O values for the MF, KL, and LG plutons (+ 7.0 < δ 18O >+10.1‰; Rangel et al., 2008) suggest that the magmas in the eastern Llano Uplift may contain a significant mantle component, whereas relatively high δ18O values (+ 9.3 to + 9.7‰; Bebout and Carlson, 1986) for other coeval TMG rocks suggest that a significant crustal component is involved. Whole-rock and trace-element chemistry indicate that the MF and KL plutons, along with the coarser grained textures of the LG pluton, are 'A-type' granites. However, with no coeval mafic dikes, syenitic compositions, or volcanic rocks it is clear that the TMG plutons do not represent anorogenic granites. The available evidence is most compatible with emplacement of the TMG plutons in a post-orogenic (Grenville), relaxation and extensional (i.e., slab breakoff) setting.

Intrusive rocks of the Holden and Lucerne quadrangles, Washington; the relation of depth zones, composition, textures, and emplacement of plutons

USGS Publications Warehouse

Cater, Fred W.

1982-01-01

The core of the northern Cascade Range in Washington consists of Precambrian and upper Paleozoic metamorphic rocks cut by numerous plutons, ranging in age from early Triassic to Miocene. The older plutons have been eroded to catazonal depths, whereas subvolcanic rocks are exposed in the youngest plutons. The Holden and Lucerne quadrangles span a -sizeable and representative part of this core. The oldest of the formations mapped in these quadrangles is the Swakane Biotite Gneiss, which was shown on the quadrangle maps as Cretaceous and older in age. The Swakane has yielded a middle Paleozoic metamorphic age, and also contains evidence of zircon inherited from some parent material more than 1,650 m.y. old. In this report, the Swakane is assigned an early Paleozoic or older age. It consists mostly of biotite gneiss, but interlayered with it are scattered layers and lenses of hornblende schist and gneiss, clinozoisite-epidote gneiss, and quartzite. Thickness of the Swakane is many thousands of meters, and the base is not exposed. The biotite gneiss is probably derived from a pile of siliceous volcanic rocks containing scattered sedimentary beds and basalt flows. Overlying the Swakane is a thick sequence of eugeosynclinal upper Paleozoic rocks metamorphosed to amphibolite grade. The sequence includes quartzite and thin layers of marble, hornblende schist and gneiss, graphitic schist, and smaller amounts of schist and gneiss of widely varying compositions. The layers have been tightly and complexly folded, and, in places, probably had been thrust over the overlying Swakane prior to metamorphism. Youngest of the supracrustal rocks in the area are shale, arkosic sandstone, and conglomerate of the Paleocene Swauk Formation. These rocks are preserved in the Chiwaukum graben, a major structural element of the region. Of uncertain age, but possibly as old as any of the intrusive rocks in the area, are small masses of ultramafic rocks, now almost completely altered to serpentine. These occur either as included irregular masses in later intrusives or as tectonically emplaced lenses in metamorphic rocks. Also of uncertain age but probably much younger, perhaps as young as Eocene, are larger masses of hornblendite and hornblende periodotite that grade into hornblende gabbro. These are exposed on the surface and in the underground workings of the Holden mine. Oldest of the granitoid intrusives are the narrow, nearly concordant Dumbell Mountain plutons, having a radiometric age of about 220 m.y. They consist of gneissic hornblende-quartz diorite and quartz diorite gneiss. Most contacts consist of lit-par-lit zones, but some are gradational or more rarely sharp. The plutons are typically catazonal. Closely resembling the Dumbell Mountain plutons in outcrop appearance, but differing considerably in composition, are the Bearcat Ridge plutons. These consist of gneissic quartz diorite and granodiorite. The Bearcat Ridge plutons are not in contact with older dated plutons, but because their textural and structural characteristics so closely resemble those of the Dumbell Mountain plutons, they are considered to be the same age. Their composition, however, is suggestive of a much younger age. Cutting the Dumbell Mountain plutons is the Leroy Creek pluton, consisting of gneissic biotite-quartz diorite and trondjhemite. The gneissic foliation in the Leroy Creek is characterized by a strong and pervasive swirling. Cutting both the Dumbell Mountain and Leroy Creek plutons are the almost dikelike Seven-fingered Jack plutons. These range in composition from gabbro to quartz diorite; associated with them are contact complexes of highly varied rocks characterized by gabbro and coarse-grained hornblendite. Most of the rocks are gneissic, but some are massive and structureless. Radiometric ages by various methods range from 100 to 193 m.y. Dikes, sills, small stocks, and irregular clots of leucocratic quartz diorite and granodiorite are abundant in t

Decompressional metamorphic P-T paths from kyanite-sillimanite-andalusite bearing rocks in north-central New Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daniel, C.G.; Thompson, A.G.; Grambling, J.A.

1992-01-01

Proterozoic rocks in six uplifts in northern and central New mexico display decompressional metamorphic P-T paths, apparently, related to crustal extension at a time near 1,440 Ma. Metamorphic P-T paths from the Picuris, Rincon, Truchas, Rio Mora, Sandia and southern Manzano Mountains are constrained by three independent techniques: (1) Al[sub 2]SiO[sub 5] and other mineral parageneses; (2) the Gibbs method applied to compositional zoning in garnet and plagioclase; and (3) a new technique based upon Fe[sup 3+] and Mn[sup 3+] zoning in andalusite. Aluminum silicate textures suggest that kyanite and subsequent sillimanite (commonly aligned parallel to the regional foliation andmore » lineation) are earlier than andalusite, which overprints foliation. The decompressional P-T paths are interpreted to reflect crustal extension. Contact metamorphic aureoles associated with the Priest pluton in the southern Manzano and the Sandia Granite in the Sandia Mountains place constraints upon the timing of the Ky-Sil-And metamorphism. In the southern Manzano Mountains metamorphic isograds marking the first appearance of staurolite and (closer to the pluton) sillimanite are parallel to the margin of the 1,440 Ma Priest quartz monzonite pluton. Similarly, isograds also surround the NW margin of the 1,420 Ma Sandia pluton. The regional metamorphism appears to have coincided with and to have been enhanced by the emplacement of the plutons. Because plutonism and regional metamorphism appear to have been synchronous, pluton emplacement occurred during decompression.« less

Thermal evolution of plutons: a parameterized approach.

PubMed

Spera, F

1980-01-18

A conservation-of-energy equation has been derived for the spatially averaged magma temperature in a spherical pluton undergoing simultaneous crystallization and both internal (magma) and external (hydrothermal fluid) thermal convection. The model accounts for the dependence of magma viscosity on crystallinity, temperature, and bulk composition; it includes latent heat effects and the effects of different initial water concentrations in the melt and quantitatively considers the role that large volumes of circulatory hydrothermal fluids play in dissipating heat. The nonlinear ordinary differential equation describing these processes has been solved for a variety of magma compositions, initial termperatures, initial crystallinities, volume ratios of hydrothermal fluid to magma, and pluton sizes. These calculations are graphically summarized in plots of the average magma temperature versus time after emplacement. Solidification times, defined as the time necessary for magma to cool from the initial emplacement temperature to the solidus temperature vary as R(1,3), where R is the pluton radius. The solidification time of a pluton with a radius of 1 kilometer is 5 x 10(4) years; for an otherwise identical pluton with a radius of 10 kilometers, the solidification time is approximately 10(6) years. The water content has a marked effect on the solidification time. A granodiorite pluton with a radius of 5 kilometers and either 0.5 or 4 percent (by weight) water cools in 3.3 x 10(5) or 5 x 10(4) years, respectively. Convection solidification times are usually but not always less than conduction cooling times.

High magnetic susceptibility granodiorite as a source of surface magnetic anomalies in the King George Island, Antarctica

NASA Astrophysics Data System (ADS)

Kon, S.; Nakamura, N.; Funaki, M.; Sakanaka, S.

2012-12-01

Change in plate motion produces convergence of the two oceanic lithospheres and the formation of volcanic island arcs above the subducted older and thicker plate. The association of calc-alkaline diorites to tonalites and granodiorites (ACG) is typical plutonic rocks of the volcanic arcs. In the many island arcs that surround the Pacific Ocean, ACG generally forms shallow level plutons and is closely associated with volcanic rocks. The Japan Arc setting had occurred the emplacement of the highly magnetic granitoid along the fore-arc basin before back-arc spreading at middle Miocene, showing a linear positive magnetic anomaly. Similar magnetic anomalies have also been exhibited along the Circum-Pacific Belt. Along East Antarctica, it is well known that the South Shetland Islands have been formed by back-arc spreading related to the subduction along the South Shetland trench during the late Cretaceous and middle Miocene. Moreover, geology in the South Shetland Islands consists of lava flows with subordinate pyroclastic deposits, intrusive dykes-sills, granitic plutons, displaying a typical subduction-related calc-alkaline volcanic association. However, there is little report on the presence of fore-arc granitoid. Here we report the distribution and structure of the granitic plutons around Marian Cove in the King George Island, South Shetland, East Antarctica by surface geological survey and magnetic anisotropic studies. Then we compare the distribution of granitic plutons with surface magnetic anomalies through our ship-borne and foot-borne magnetic surveys. The granitic plutons are distributed only shallow around the Marian cove in the King George Island, and the plutons had been intruded in the Sejong formation with pyroclastic deposits and basaltic/rhyoritic lavas, suggesting the post back-arc spreading. We sampled 8 plutons, 12 basaltic lavas and 6 andestic dykes, all located within four kilometer radius from the Korean Antarctic research station (King Sejong station) in the western side of King George Island. The plutonic rocks of diorite and granodiorite show high values of bulk magnetic susceptibility of c.a. 0.01-0.4 SI, appearing to be the source of positive magnetic anomaly. We also revealed the preferred petrofabric lineation directions at the sites using anisotropy of magnetic susceptibility (AMS). The AMS showed the plutonic rocks represent the vertical intrusion from the deep seated magma. Our optical microscope observation verified the maximum AMS orientation is parallel to the preferred alignment of framework-forming plagioclase, suggesting the alignment of euhedral magnetite grains along the long-axes of plagioclases. Our ship-borne and foot-borne surveys of geomagnetic filed anomaly agree well with the distribution of the plutonic rocks, revealing the possible origin of surface magnetic anomaly. These suggests that the plutons in this area may be included ACG, and this magnetic surveys is proposed to infer the availability to find out the presence of granitoid.

Construction of the Devonian bimodal Gouldsboro pluton via multiple intrusion, coastal Maine, USA

NASA Astrophysics Data System (ADS)

Koteas, C.

2006-12-01

The Gouldsboro pluton (377 ± 19 ma) (Metzger et al., 1982) of the eastern coastal Maine magmatic province preserves abundant evidence of mechanical interaction between mafic and felsic magmas, as well as the stoping and doming of country rock. Coastal Maine is a unique location where subequal volumes of felsic and mafic material have interacted and are preserved in both plutonic and volcanic complexes. The effects of generation and mobilization of large volumes of magma in the shallow crust are well-preserved. The Gouldsboro pluton provides an excellent perspective from the highest to lowest sections (southwest to northeast) of a hybrid magmatic system. The Gouldsboro magmatic complex is hosted by undated greenstone to the north that is overlain by the 477 ± 18 ma (Metzger, 1977) meta-volcanic/meta-sedimentary Bar Harbor formation. Blocks of both units are discernable as 10 cm to 2 m-diameter blocks within the pluton. The Gouldsboro granite is dominantly a fine to medium grained feldspar- rich leucocratic hornblende granite, although biotite is sometimes present. Miarolitic cavities are common in the highest exposure of the system, especially in the south where the finest grained, most leucocratic granite occurs. Other units include, from lowest to highest in the system, hybrid diorite-gabbro, hybrid granite-granodiorite, granite hosting 30 cm to 3 m-diameter globular basaltic pillows, and a previously unrecognized pyroclastic unit, very similar to the lowermost member of the Cranberry Isle series, a volcanic breccia (Seaman et al., 1999). The pyroclastic unit is intruded by medium grained granite hosting angular fragments of volcanic, mafic plutonic, and country rock. While the contact between gabbro near the base of the pluton and granite in the middle of the pluton is commonly gradational, there are complex intrusive breccias in some areas where fine to coarse, angular diorite to gabbro xenoliths are hosted by granodiorite and granite. Enclave-rich zones appear to be associated with gabbroic intrusions. At least two distinct zones of quenched, pillowed mafic sheets, striking east-west and dipping shallowly north, occur south of the gabbro-granite contact (Wiebe and Adams, 1995). These features suggest large scale replenishment of an initially felsic system by multiple later mafic intrusions. Given the presence of pyroclastic rocks at the southwestern margin of the pluton, it is possible that the pluton may have intruded its own volcanic deposits. Xenoliths of volcanic breccia in the granite intruding the volcanic rock are similar in appearance to the "shatter zone" (Gilman et al., 1988) that surrounds the Cadiallac Mountain granite, and suggest that the Gouldsboro pluton abruptly expanded as a result of vesiculation resulting in explosive eruption. Similarity in pluton architectures, magmatic histories and compositional ranges implies that the history of the Gouldsboro and Cadillac Mountain magmatic systems may have been more intimately related than previously thought.

A STATE-VARIABLE APPROACH FOR PREDICTING THE TIME REQUIRED FOR 50% RECRYSTALLIZATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. STOUT; ET AL

2000-08-01

It is important to be able to model the recrystallization kinetics in aluminum alloys during hot deformation. The industrial relevant process of hot rolling is an example of where the knowledge of whether or not a material recrystallizes is critical to making a product with the correct properties. Classically, the equations that describe the kinetics of recrystallization predict the time to 50% recrystallization. These equations are largely empirical; they are based on the free energy for recrystallization, a Zener-Holloman parameter, and have several adjustable exponents to fit the equation to engineering data. We have modified this form of classical theorymore » replacing the Zener-Hollomon parameter with a deformation energy increment, a free energy available to drive recrystallization. The advantage of this formulation is that the deformation energy increment is calculated based on the previously determined temperature and strain-rate sensitivity of the constitutive response. We modeled the constitutive response of the AA5182 aluminum using a state variable approach, the value of the state variable is a function of the temperature and strain-rate history of deformation. Thus, the recrystallization kinetics is a function of only the state variable and free energy for recrystallization. There are no adjustable exponents as in classical theory. Using this approach combined with engineering recrystallization data we have been able to predict the kinetics of recrystallization in AA5182 as a function of deformation strain rate and temperature.« less

Evidence for a close phylogenetic relationship between Melissococcus pluton, the causative agent of European foulbrood disease, and the genus Enterococcus.

PubMed

Cai, J; Collins, M D

1994-04-01

The 16S rRNA gene sequence of Melissococcus pluton, the causative agent of European foulbrood disease, was determined in order to investigate the phylogenetic relationships between this organism and other low-G + C-content gram-positive bacteria. A comparative sequence analysis revealed that M. pluton is a close phylogenetic relative of the genus Enterococcus.

Reconnaissance geochemical exploration of the plutons of quartz monzonite and granite in the Jabal Lababa and Ar Rayth areas, southern Asir, Kingdom of Saudi Arabia

USGS Publications Warehouse

Overstreet, W.C.; Assegaff, A.B.; Jambi, Mohammed; Hussain, M.A.; Selner, G.I.; Matzko, J.J.

1985-01-01

Three nonmagnetic high-density concentrates containing 1,000 to 15,000 ppm lead were found on the granitic pluton near Ar Rayth. The source of the lead is not galena, and high values for lead appear to be characteristic of the pluton but do not indicate an ore deposit.

Mesoscale model for fission-induced recrystallization in U-7Mo alloy

DOE PAGES

Liang, Linyun; Mei, Zhi -Gang; Kim, Yeon Soo; ...

2016-08-09

A mesoscale model is developed by integrating the rate theory and phase-field models and is used to study the fission-induced recrystallization in U-7Mo alloy. The rate theory model is used to predict the dislocation density and the recrystallization nuclei density due to irradiation. The predicted fission rate and temperature dependences of the dislocation density are in good agreement with experimental measurements. This information is used as input for the multiphase phase-field model to investigate the fission-induced recrystallization kinetics. The simulated recrystallization volume fraction and bubble induced swelling agree well with experimental data. The effects of the fission rate, initial grainmore » size, and grain morphology on the recrystallization kinetics are discussed based on an analysis of recrystallization growth rate using the modified Avrami equation. Here, we conclude that the initial microstructure of the U-Mo fuels, especially the grain size, can be used to effectively control the rate of fission-induced recrystallization and therefore swelling.« less

Microstructure and critical strain of dynamic recrystallization of 6082 aluminum alloy in thermal deformation

NASA Astrophysics Data System (ADS)

Ren, W. W.; Xu, C. G.; Chen, X. L.; Qin, S. X.

2018-05-01

Using high temperature compression experiments, true stress true strain curve of 6082 aluminium alloy were obtained at the temperature 460°C-560°C and the strain rate 0.01 s-1-10 s-1. The effects of deformation temperature and strain rate on the microstructure are investigated; (‑∂lnθ/∂ε) ‑ ε curves are plotted based on σ-ε curve. Critical strains of dynamic recrystallization of 6082 aluminium alloy model were obtained. The results showed lower strain rates were beneficial to increase the volume fraction of recrystallization, the average recrystallized grain size was coarse; High strain rates are beneficial to refine average grain size, the volume fraction of dynamic recrystallized grain is less than that by using low strain rates. High temperature reduced the dislocation density and provided less driving force for recrystallization so that coarse grains remained. Dynamic recrystallization critical strain model and thermal experiment results can effectively predict recrystallization critical point of 6082 aluminium alloy during thermal deformation.

Mesozoic tectonic history and geochronology of the Kular Dome, Russia and Bendeleben Mountains, Seward Peninsula, Alaska

NASA Astrophysics Data System (ADS)

Harris, Daniel B.

The tectonic history responsible for formation of the major basins of the Arctic and movement of landmasses surrounding these basins remains unclear despite multidisciplinary efforts. Most studies focus on one of four potential movement pathways of the Arctic Alaska-Chukotka microplate during the Mesozoic and the relationship between this movement and formation of the Amerasian Basin. Due to difficulty in access and harsh climate of the Arctic Ocean, most geological studies focus on landmasses surrounding the Amerasian Basin. For this reason, we have conducted research in the Kular Dome of northern Russia and the Bendeleben Mountain Range of the Seward Peninsula, Alaska in an attempt to better constrain timing of emplacement of plutons in these areas and their associated tectonic conditions. For both areas, U-Pb zircon crystallization geochronology was performed on several samples collected from plutons responsible for gneiss dome formation during the Mesozoic. Dating of these plutons in tandem with field observation and thin section analysis of deformation suggests an extensional emplacement setting for both areas during the Middle to Late Cretaceous. In the Kular Dome, intrusion of the Kular pluton occurred from approximately 111-103 Ma along with extensional development of the nearby Yana fault, which was previously interpreted as a regional suture between deposits of the Kolyma-Omolon superterrane and passive-margin sequences of the Verkhoyansk Fold-Thrust Belt. Evidence for extensional emplacement of the Kular pluton includes top-down shear around mantled porphyroblasts plunging along gentle foliation away from the pluton and abundant low-offset normal faults in the area. The Kular Dome also falls into a north-south oriented belt of Late Cretaceous plutons interpreted to have been emplaced under regional extensional conditions based on geochemical discrimination diagrams. Detrital zircon geochronology was also performed on seven samples collected from Triassic sandstones and Jurassic greywackes near the Kular Dome and compared to results from previously studied surrounding regions in Russia and the Arctic Alaska-Chukotka microplate in order to better define the relationship between the Arctic Alaska-Chukotka microplate and northern Russia during the Mesozoic. Results suggest that though the Chukotkan portion of the Arctic Alaska-Chukotka microplate was separated from the Kular Dome area during the Triassic, by the Tithonian it shared similar source regions for detrital zircon populations. Based on detrital zircon data from Chukotka, the Kular Dome, and the In’Yali Debin area, a new tectonic model for the formation of the Amerasian Basin and structures within is proposed. In this new model, Chukotka separated from and moved independently of the North Slope of Alaska during the Late Triassic-Early Jurassic, experiencing strike-slip emplacement along the northern coast of paleo-Russia and closed the South Anyui Ocean via transpression to form the South Anyui suture. Geochronologic and geochemical results from the Bendeleben and Windy Creek plutons of the southeastern Seward Peninsula were also studied to better describe Arctic tectonic conditions during the Late Mesozoic. In this area, six samples were collected from the multiple lithologies seen within the Bendeleben and Windy Creek plutons and were also dated by zircon U-Pb geochronology and analyzed for their major and trace element geochemistry. Results suggest that the Bendeleben and Windy Creek plutons were emplaced during multiple extensionally driven pulses of magmatism above a southward-retreating, northward-subducting slab causing extension in the overlying crust from about 104 Ma to 83 Ma. The magma chamber at depth was experiencing continuous replenishment and liquid segregation causing stratification of the Bendeleben pluton. Magmas of the felsic cap, which now form the outer region of the Bendeleben pluton, were emplaced first, followed by subsequent intrusion of younger, mafic magma from below. Evidence for north-south directed extension during emplacement of the Bendeleben pluton was in the form of consistent east-west dike orientation in the Seward Peninsula, top-down shear in mantled garnet porphyroblasts from country rock surrounding the Bendeleben pluton, gentle foliation dip away from the pluton and stretching lineations around the pluton. Discrimination diagrams based on Rb, Nb and Y concentrations from bulk rock samples supports a collisional or volcanic arc province and is consistent with emplacement in an extensional environment above a subducting plate.

Effects of homogenization treatment on recrystallization behavior of 7150 aluminum sheet during post-rolling annealing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Zhanying; Department of Applied Science, University of Québec at Chicoutimi, Saguenay, QC G7H 2B1; Zhao, Gang

2016-04-15

The effects of two homogenization treatments applied to the direct chill (DC) cast billet on the recrystallization behavior in 7150 aluminum alloy during post-rolling annealing have been investigated using the electron backscatter diffraction (EBSD) technique. Following hot and cold rolling to the sheet, measured orientation maps, the recrystallization fraction and grain size, the misorientation angle and the subgrain size were used to characterize the recovery and recrystallization processes at different annealing temperatures. The results were compared between the conventional one-step homogenization and the new two-step homogenization, with the first step being pretreated at 250 °C. Al{sub 3}Zr dispersoids with highermore » densities and smaller sizes were obtained after the two-step homogenization, which strongly retarded subgrain/grain boundary mobility and inhibited recrystallization. Compared with the conventional one-step homogenized samples, a significantly lower recrystallized fraction and a smaller recrystallized grain size were obtained under all annealing conditions after cold rolling in the two-step homogenized samples. - Highlights: • Effects of two homogenization treatments on recrystallization in 7150 Al sheets • Quantitative study on the recrystallization evolution during post-rolling annealing • Al{sub 3}Zr dispersoids with higher densities and smaller sizes after two-step treatment • Higher recrystallization resistance of 7150 sheets with two-step homogenization.« less

On the Coupling between Recrystallization and Precipitation Following Hot Deformation in a γ-γ' Nickel-Based Superalloy

NASA Astrophysics Data System (ADS)

Seret, Anthony; Moussa, Charbel; Bernacki, Marc; Bozzolo, Nathalie

2018-06-01

Postdynamic recrystallization and γ' precipitation during cooling from γ' supersolvus temperature after hot compression were studied in the AD730 (AD730 is a trademark of Aubert et Duval Company in Paris, France) γ-γ' nickel-based superalloy. Emphasis was on not only both phenomena as distinct mechanisms but also on their mutual influence in terms of physical mechanisms. The growth of γ' precipitates is hastened in the unrecrystallized grains compared to the recrystallized ones. This could possibly be attributed to the higher dislocation content acting as high-diffusivity paths. Postdynamic recrystallization is not prevented by Smith-Zener pinning of the recrystallization front by the γ' precipitates. Instead, the recrystallization front dissolves γ' precipitates, which then reprecipitate discontinuously or continuously and coherently with the surrounding γ matrix in the recrystallized grains.

Composition of coarse-grained magnetite from pegmatite dikes related to plutons of quartz monzonite in the Jabal Lababa area, Kingdom of Saudi Arabia

USGS Publications Warehouse

Overstreet, William C.; Mousa, Hassan; Matzko, John J.

1985-01-01

Crystals of magnetite as large as 30 mm long and 7 mm thick are locally present in quartz-rich zones of interior and exterior pegmatite dikes related to plutons of quartz monzonite in the Jabal Lababa area. Niobium, tin, and yttrium are strongly enriched in six specimens of magnetite from interior pegmatite dikes in a small pluton where these elements form geochemical anomalies in nonmagnetic heavy-mineral concentrates from wadi sediment. Less abundant anomalous elements in the magnetite are molybdenum, lead, and zirconium, which also tend to be present in anomalous amounts in the nonmagnetic concentrates from the niobium-bearing pluton. The most anomalous trace element in the magnetite is zinc, which is at least 10 times as abundant as it is in the quartz monzonite plutons or in the nonmagnetic concentrates. The capacity of magnetite to scavenge molybdenum, zinc, niobium, lead, tin, yttrium, and zirconium suggests the possible utility of magnetite as a geochemical sample medium.

Courtright intrusive zone: Sierra National Forest, Fresno County, California.

USGS Publications Warehouse

Bateman, P.C.; Kistler, R.W.; DeGraff, J.V.

1984-01-01

This is a field guide to a well-exposed area of plutonic and metamorphic rocks in the Sierra National Forest, Fresno County, California. The plutonic rocks, of which three major bodies are recognized, besides aplite and pegmatite dykes, range 103 to approx 90 m.y. in age. Points emphasized include cataclastic features within the plutonic rocks, schlieren and mafic inclusions. (M.A. 83M/0035).-A.P.

JPRS Report, West Europe: Reference Aid, Swedish-English Glossary of Military and Technical Acronyms and Abbreviations.

DTIC Science & Technology

1988-07-22

Pi plansch Pi plats PlottL plottingledare plufs planerings- och uppfölj ningssystem plut pluton plutch plutonschef plutstab plutonstab...äsbandvagn pvrb pansarvärnsrobot pvrbplut pansarvärnsrobot pluton anti-tank gun anti-tank gun anti-tank gun tank destroyer, SP anti-tank gun...tpl transportledare tplut tung pluton tpmedel transportmedel type of transportation schedule, roster regulating officer heavy weapons

The Shir-Kuh pluton (Central Iran): Magnetic fabric evidences for the coalescence of magma batches during emplacement

NASA Astrophysics Data System (ADS)

Sheibi, M.; Bouchez, J. L.; Esmaeily, D.; Siqueira, R.

2012-03-01

The ˜136 Ma, NW-SE elongate Shir-Kuh pluton is one of the most poorly understood geological feature of Central Iran. It is composed of peraluminous rocks, corresponding to ilmenite-bearing S-type granites compositionally ranging from granodiorites to leucogranites. These rocks show a continuum in their chemistry attributed to progressive differentiation. This allows using the anisotropy of magnetic susceptibility technique to tempt establishing the relative chronology between emplacements of magma batches in the pluton. The rather low susceptibility magnitudes (Km < 400 μSI) depict a dominant paramagnetic behavior of the pluton. The magnetic fabrics data (magnetic lineation and foliation maps, K, P and T parameters), complemented by field and microstructural observations, reveal that two feeder zones at least, as characterized by areas having steep lineations ascribed to magma flow likely issued from the base of the brittle crust, served as conduits for the magmas. The early Cretaceous age of the pluton, the orientations of the feeding zones, the overall lineation directions throughout the pluton, as well as the S-type nature of the magmas call for a dextral transpressive regime which might have been active in the back-arc region located above the subducting eastern branch of the Neo-Tethys.

Lateral extrusion of a thermally weakened pluton overburden (Campiglia Marittima, Tuscany)

NASA Astrophysics Data System (ADS)

Vezzoni, Simone; Rocchi, Sergio; Dini, Andrea

2017-10-01

The ascent and emplacement of magmas in the upper crust modify the local pre-existing thermal and rheological settings. Such changes have important effects in producing anomalous structures, mass extrusion, rock fracturing, and in some conditions, hydrothermal mineralizations. In the Campiglia Marittima area, detailed field mapping led to the reconstruction of a local deformation history that overlaps, chronologically and spatially, with regional extension. This local deformation was triggered at the Miocene-Pliocene boundary by the intrusion of a monzogranitic pluton beneath a carbonate sedimentary sequence. The emplacement of the pluton produced a perturbation in the rheological behaviour of the carbonate host rocks, producing transient ductile conditions in the very shallow crust. The carbonate rocks were thermally weakened and flowed laterally, accumulating downslope of the pluton roof, mainly toward the east. As the thermal anomaly was decaying, the brittle-ductile boundary moved progressively back towards the pluton, and large tension gash-shaped volumes of fractured marble were generated. These fractured volumes were exploited by rising hydrothermal fluids generating sigmoidal skarn bodies and ore shoots. This work presents the Campiglia Marittima case study as a prime example of structural interference between regional extensional structures and local, lateral mass extrusion in a transient ductile rheological regime triggered by pluton emplacement.

Lateral extrusion of a thermally weakened pluton overburden (Campiglia Marittima, Tuscany)

NASA Astrophysics Data System (ADS)

Vezzoni, Simone; Rocchi, Sergio; Dini, Andrea

2018-06-01

The ascent and emplacement of magmas in the upper crust modify the local pre-existing thermal and rheological settings. Such changes have important effects in producing anomalous structures, mass extrusion, rock fracturing, and in some conditions, hydrothermal mineralizations. In the Campiglia Marittima area, detailed field mapping led to the reconstruction of a local deformation history that overlaps, chronologically and spatially, with regional extension. This local deformation was triggered at the Miocene-Pliocene boundary by the intrusion of a monzogranitic pluton beneath a carbonate sedimentary sequence. The emplacement of the pluton produced a perturbation in the rheological behaviour of the carbonate host rocks, producing transient ductile conditions in the very shallow crust. The carbonate rocks were thermally weakened and flowed laterally, accumulating downslope of the pluton roof, mainly toward the east. As the thermal anomaly was decaying, the brittle-ductile boundary moved progressively back towards the pluton, and large tension gash-shaped volumes of fractured marble were generated. These fractured volumes were exploited by rising hydrothermal fluids generating sigmoidal skarn bodies and ore shoots. This work presents the Campiglia Marittima case study as a prime example of structural interference between regional extensional structures and local, lateral mass extrusion in a transient ductile rheological regime triggered by pluton emplacement.

An AMS study of the Takidani pluton (Japan)

NASA Astrophysics Data System (ADS)

Hartung, Eva; Caricchi, Luca; Floess, David; Wallis, Simon; Harayama, Satoru

2016-04-01

Large plutonic bodies are typically constructed incrementally often by under-accretion of distinct successive magma pulses. Petrography and geochemistry of the Takidani Pluton (1.54 Ma ± 0.23 Ma) in the Northern Japanese Alps show that the chemical and textural variability observed at the roof of this intrusion is best explained by the segregation of residual melt from a crystallising magma body. We carried out a magnetic susceptibility survey (bulk susceptibility and anisotropy of magnetic susceptibility) to identify the structures associated with the emplacement and extraction of residual melts from a magmatic mush. Additionally, we determined shape preferred orientations (SPO) of amphibole at several locations within the Takidani pluton. From bottom to top of the intrusion, the bulk susceptibility is about constant in the main granodioritic part, decreases roofwards within the porphyritic unit, before increasing again within the marginal granodiorite close to the contact with the overlaying Hotaka Andesite. Such variability mimics the major and trace elements compositional variability measured in the whole rock samples. Magnetic foliations are observed at the western tectonic contact of the pluton potentially indicating overprint, while most other magnetic fabrics across the pluton are characterised by triaxial ellipsoids of magnetic susceptibility or magnetic lineations. Our preliminary data and the lack of internal contacts indicate that Takidani Pluton was likely emplaced as a series of successive magma pulses finally merging to produce a large connected magma body. While amphibole foliations may likely be the results of super-solidus tectonic overprint, anisotropy of magnetic susceptibility data may be related to post-emplacement melt segregation.

Insights into the emplacement of upper-crustal plutons and their relationship to large silicic calderas, from field relationships, geochronology, and zircon trace element geochemistry in the Stillwater – Clan Alpine caldera complex, western Nevada, USA

USGS Publications Warehouse

Colgan, Joseph P.; John, David A.; Henry, Christopher D.; Watts, Kathryn E.

2018-01-01

Geologic mapping, new U-Pb zircon ages, and new and published 40Ar/39Ar sanidine ages document the timing and extent of Oligocene magmatism in the southern Stillwater Range and Clan Alpine Mountains of western Nevada, where Miocene extension has exposed at least six nested silicic calderas and underlying granitic plutons to crustal depths locally ≥ 9 km. Both caldera-forming rhyolitic tuffs and underlying plutons were emplaced in two episodes, one from about 30.4–28.2 Ma that included the Deep Canyon, Job Canyon, and Campbell Creek calderas and underlying plutons, and one from about 25.3–24.8 Ma that included the Louderback Mountains, Poco Canyon, and Elevenmile Canyon calderas and underlying plutons. In these two 1–2 m.y. periods, almost the entire Mesozoic upper crust was replaced by Oligocene intrusive and extrusive rocks to depths ≥ 9 km over an estimated total area of ~ 1500 km2 (pre-extension). Zircon trace element geochemistry indicates that some plutonic rock can be solidified residual magma from the tuff eruptions. Most plutons are not solidified residual magma, although they directly underlie calderas and were emplaced along the same structures shortly after to as much as one million years after caldera formation. Magma chambers and plutons grew by floor subsidence accommodated by downward transfer of country rocks. If other Great Basin calderas are similar, the dense concentration of shallowly exposed calderas in central Nevada is underlain by a complexly zoned mid-Cenozoic batholith assembled in discrete pulses that coincided with formation of large silicic calderas up to 2500–5000 km3.

La Escalerilla pluton, San Luis Argentina: The orogenic and post-orogenic magmatic evolution of the famatinian cycle at Sierras de San Luis

NASA Astrophysics Data System (ADS)

Morosini, Augusto Francisco; Ortiz Suárez, Ariel Emilio; Otamendi, Juan Enrique; Pagano, Diego Sebastián; Ramos, Gabriel Alejandro

2017-01-01

Field relationships, geochemical analysis and two new absolute ages (LA-MC-ICP-MS U/Pb-zircon) allow the division of the La Escalerilla pluton (previously considered to be a single granitic body) into two different plutons: a new La Escalerilla pluton (s.s.), dated at 476.7 ± 9.6 Ma, that represents the northern portion, and the El Volcán pluton, dated at 404.5 ± 8.5 Ma, located in the southern sector. The La Escalerilla pluton is composed of three facies: (1) biotite-bearing granodiorite, (2) porphyritic biotite-bearing granite, and (3) porphyritic two micas-bearing leucogranite, being the presence of late-magmatic dykes in these facies common. The El Volcán pluton is composed of two main facies: 1) porphyritic biotite-bearing granite, and 2) two micas-bearing leucogranite, but amphibole-bearing monzodioritic and tonalititic mega-enclaves are also common, as well as some dykes of amphibole and clinopyroxene-bearing syenites. A peculiarity between the two plutons is that their most representative facies (porphyritic biotite-bearing granites) have, apart from different absolute ages, distinctive geochemical characteristics in their concentrations of trace elements; the La Escalerilla granite is comparatively poorer in Ba, Sr, Nb, La, Ce, P, and richer in Rb, Tb, Y, Tm and Yb. The El Volcán granite is notably enriched in Sr and depleted in Y, resulting in high Sr/Y ratios (12.67-39.08) compared to the La Escalerilla granite (1.11-2.41). These contrasts indicate that the separation from their sources occurred at different depths: below 25 km for the La Escalerilla, and above 30 km for the El Volcán. Moreover, the contrasts allow us to interpret a thin crust linked to an environment of pre-collisional subduction for the first case, and a thickened crust of post-collisional environment for the second, respectively.

Influence of Fe(2+)-catalysed iron oxide recrystallization on metal cycling.

PubMed

Latta, Drew E; Gorski, Christopher A; Scherer, Michelle M

2012-12-01

Recent work has indicated that iron (oxyhydr-)oxides are capable of structurally incorporating and releasing metals and nutrients as a result of Fe2+-induced iron oxide recrystallization. In the present paper, we briefly review the current literature examining the mechanisms by which iron oxides recrystallize and summarize how recrystallization affects metal incorporation and release. We also provide new experimental evidence for the Fe2+-induced release of structural manganese from manganese-doped goethite. Currently, the exact mechanism(s) for Fe2+-induced recrystallization remain elusive, although they are likely to be both oxide-and metal-dependent. We conclude by discussing some future research directions for Fe2+-catalysed iron oxide recrystallization.

Negative Temperature Dependence of Recrystallized Grain Size: Formulation and Experimental Confirmation on Copper

PubMed Central

Elmasry, Mohamed; Liu, Fan; Jiang, Yao; Mao, Ze Ning; Liu, Ying; Wang, Jing Tao

2017-01-01

The catalyzing effect on nucleation of recrystallization from existing grains resulting from previous lower temperature deformation is analyzed, analogous to the size effect of foreign nucleus in heterogeneous nucleation. Analytical formulation of the effective nucleation site for recrystallization leads to a negative temperature dependence of recrystallized grain size of metals. Non-isochronal annealing—where annealing time is set just enough for the completion of recrystallization at different temperatures—is conducted on pure copper after severe plastic deformation. More homogeneous and smaller grains are obtained at higher annealing temperature. The good fit between analytical and experimental results unveils the intrinsic feature of this negative temperature dependence of recrystallized grain size. PMID:28772676

Emplacement, petrological and magnetic susceptibility characteristics of diverse magmatic epidote-bearing granitoid rocks in Brazil, Argentina and Chile

NASA Astrophysics Data System (ADS)

Sial, A. N.; Toselli, A. J.; Saavedra, J.; Parada, M. A.; Ferreira, V. P.

1999-03-01

Magmatic epidote (mEp)-bearing granitoids from five Neoproterozoic tectonostratigraphic terranes in Northeastern (NE) Brazil, Early Palaeozoic calc-alkalic granitoids in Northwestern (NW) Argentina and from three batholiths in Chile have been studied. The elongated shape of some of these plutons suggests that magmas filled fractures and that dyking was probably the major mechanism of emplacement. Textures reveal that, in many cases, epidote underwent partial dissolution by host magma and, in these cases, may have survived dissolution by relatively rapid upward transport by the host magma. In plutons where such a mechanism is not evident, unevenly distributed epidote at outcrop scale is armoured by biotite or near-solidus K-feldspar aggregates, which probably grew much faster than epidote dissolution, preventing complete resorption of epidote by the melt. Al-in-hornblende barometry indicates that, in most cases, amphibole crystallized at P≥5 kbar. Kyanite-bearing thermal aureoles surrounding plutons that intruded low-grade metamorphic rocks in NE Brazil support pluton emplacement at intermediate to high pressure. mEp show overall chemical variation from 20 to 30 mol% (mole percent) pistacite (Ps) and can be grouped into two compositional ranges: Ps 20-24 and Ps 27-30. The highest Ps contents are in epidotes of plutons in which hornblende solidified under P<5 kbar. The percentage of corrosion of individual epidote crystals included in plagioclase in high-K calc-alkalic granitoids in NE Brazil, emplaced at 5-7 kbar pressure, yielded estimates of magma transport rate from 70 to 350 m year -1. Most of these plutons lack Fe-Ti oxide minerals and Fe +3 is mostly associated with the epidote structure. Consequently, magnetic susceptibility (MS) in the Neoproterozoic granitoids in NE Brazil, as well as Early Palaeozoic plutons in Argentina and Late Palaeozoic plutons in Chile, is usually low (<0.50×10 -3 SI), which is typical behavior of plutons which crystallized under low fO 2 (ilmenite-series granitoids), although Fe/(Fe+Mg) ratios in hornblende (0.40-0.65) indicate crystallization under high fO 2. Mesozoic to Tertiary calc-alkalic plutons in Chile, however, exhibit iron oxide minerals and MS values >3.0×10 -3 SI, typical of magnetite-series granitoids crystallized under higher oxygen fugacity. In NE Brazil, Argentina and Chile, it seems that mEp is more common in Precambrian to Palaeozoic ilmenite-series granitoids, while its occurrence in magnetite-series granitoids is more restricted to Mesozoic to Tertiary granitoids.

Mineralogy and Chemistry of Continental-like Calc-alkaline Plutons on Adak Island in the Oceanic Aleutian arc: Emplacement and Implications for the Eocene History of the Arc

NASA Astrophysics Data System (ADS)

Kay, S. M.; Citron, G. P.; Kay, R. W.; Jicha, B. R.

2016-12-01

The mineralogy and chemistry of the 15 km wide latest Eocene/Oligocene (34.6-30.9 Ma) Hidden Bay and Miocene (14.2-13.7 Ma) Kagalaska calc-alkaline plutons on Adak and Kagalaska Islands in the central Aleutian arc provide insight into the arc's Tertiary evolution. The plutons intrude the moderately light REE-enriched tholeiitic basaltic to mafic andesites of the Eocene Finger Bay Formation. The Hidden Bay pluton largely consists of mid to high-K amphibole-bearing cumulate diorite (53-55% SiO2) and granodiorite (57-64% & 61-64% SiO2) with lesser amounts of gabbro (50-52%), leucogranodiorite (67-69% SiO2) and aplite (76-77% SiO2). REE patterns indicate important fractionation of amphibole and plagioclase with pyroxene and olivine present in mafic units and orthopyroxene, biotite, quartz and K-feldspar in silicic units. Quartz, K-feldspar and biotite occur in interstices in most units. Plagioclase cores are mostly from AN40-60 with K-feldspar at OR95-OR98. Fractionation of homogeneous gabbros with high-Al basalt compositions (51% SiO2) best explains the chemistry and mineralogy of the Hidden Bay pluton. The presence of pargasitic amphibole in medium to course grained diorite cumulates indicates fractionation at 12-14 km at 950-1000°C with 5.5% H2O and a NNO oxygen fugacity. Two pyroxene, Mg hornblende and Ti-Zr zircon thermometers for granodiorite and late crystallized areas record temperatures of 850-750°C at 3.5- 4.5 % H2O and a NNO+2 oxygen fugacity. The Kagalaska pluton differs in being more calc-alkaline (alkali-rich), more bimodal in being dominated by amphibole-bearing gabbro and granodiorite/ leucogranodiorite (63-68% SiO2) and in requiring more amphibole fractionation. Both plutons have compositions approaching continental crust and characteristics that are similar to plutons intruded into continental crust. Differences with the Finger Bay Volcanic are best explained by thickening of the crust to near modern thicknesses ( 35-38 km) by the time of pluton emplacement. Residual garnet in the source required by REE patterns in some samples as well as depleted isotopic signatures are best explained by oceanic crust removed by forearc subduction erosion entering the mantle wedge as magmatism waned and the arc migrated northward after the emplacement of the plutons.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liang, Linyun; Mei, Zhi -Gang; Kim, Yeon Soo

A mesoscale model is developed by integrating the rate theory and phase-field models and is used to study the fission-induced recrystallization in U-7Mo alloy. The rate theory model is used to predict the dislocation density and the recrystallization nuclei density due to irradiation. The predicted fission rate and temperature dependences of the dislocation density are in good agreement with experimental measurements. This information is used as input for the multiphase phase-field model to investigate the fission-induced recrystallization kinetics. The simulated recrystallization volume fraction and bubble induced swelling agree well with experimental data. The effects of the fission rate, initial grainmore » size, and grain morphology on the recrystallization kinetics are discussed based on an analysis of recrystallization growth rate using the modified Avrami equation. Here, we conclude that the initial microstructure of the U-Mo fuels, especially the grain size, can be used to effectively control the rate of fission-induced recrystallization and therefore swelling.« less

Adaptive characterization of recrystallization kinetics in IF steel by electron backscatter diffraction.

PubMed

Kim, Dong-Kyu; Park, Won-Woong; Lee, Ho Won; Kang, Seong-Hoon; Im, Yong-Taek

2013-12-01

In this study, a rigorous methodology for quantifying recrystallization kinetics by electron backscatter diffraction is proposed in order to reduce errors associated with the operator's skill. An adaptive criterion to determine adjustable grain orientation spread depending on the recrystallization stage is proposed to better identify the recrystallized grains in the partially recrystallized microstructure. The proposed method was applied in characterizing the microstructure evolution during annealing of interstitial-free steel cold rolled to low and high true strain levels of 0.7 and 1.6, respectively. The recrystallization kinetics determined by the proposed method was found to be consistent with the standard method of Vickers microhardness. The application of the proposed method to the overall recrystallization stages showed that it can be used for the rigorous characterization of progressive microstructure evolution, especially for the severely deformed material. © 2013 The Authors Journal of Microscopy © 2013 Royal Microscopical Society.

In situ differentiation and evolution of potassic syenites from Svidnya, Bulgaria

NASA Astrophysics Data System (ADS)

Dyulgerov, Momchil; Platevoet, Bernard

2013-12-01

Potassic syenites from Svidnya, Bulgaria crop out as small isolated bodies as the primary for this intrusion liquid has basic to intermediate composition. The evolution in a closed magma chamber created plutonic rocks ranging from basic (melasyenite) to acid (granite) and from metaluminous to peralkaline. The most mafic varieties show cumulative textures typical for orthocumulates with cumulus phases clinopyroxene, biotite, apatite and potassium feldspar as gravitational settling is a viable process for separation of particles in the bottom parts of magma chamber. In the middle stratigraphic level of biggest body modal igneous layering with development of dark (clinopyroxene + amphibole) and light (potassium feldspar) laminas was observed. Oscillatory crystallization around eutectic point resulted in cyclic separation of mafic and felsic phases in repetitive layers. Fractionation of Ca- and Al-rich phases—clinopyroxene, biotie and potassium feldspar created peralkaline residual liquid strongly enriched in HFS elements.

Intrusive rocks northeast of Steamboat Springs, Park Range, Colorado, with a section on geochronology

USGS Publications Warehouse

Snyder, George L.; Hedge, Carl E.

1978-01-01

Major Precambrian and minor Tertiary intrusive rocks northeast of Steamboat Springs in the Park Range between 40?30' and 40?45' N. lat. are described and compared with related rocks elsewhere in Colorado and Wyoming. The Precambrian intrusives were emplaced in a sequence of high-grade interlayered felsic gneisses, amphibolites, and pelitic schists of sedimentary and volcanic origin. These rocks are cut by a major northeast-trending Precambrian shear zone where mainly left lateral movement of 1/ 2 to 1 mile is certain. Cumulative movement of many miles is possible. The Precambrian intrusives consist of a batholith, the Mount Ethel pluton, a smaller Buffalo Pass pluton, and small dikes or lenses of fine-grained porphyry, pegmatites, and ultramafics. The Mount Ethel pluton is an oval shaped body 7 miles wide by about 40 miles long (shown by geophysical data to extend beneath younger sediments in North Park). Outer batholithic contacts are sharp and dip steeply outward at about 85?. Five mappable internal variants consist, in order of decreasing age, of granodiorite, quartz monzonite porphyry of Rocky Peak, quartz monzonite of Roxy Ann Lake, granite and quartz monzonite, and. leucogranite. Internal contacts between these plutonic variants are sharp, and evidence of liquid-solid relationships abounds; despite this, all rocks except the granodiorite contribute to an Rb-Sr whole-rock isochron indicating emplacement about 1.4 b.y. (billion years) ago. The most important variants volumetrically are: the quartz monzonite porphyry of Rocky Peak, which forms an irregular 2-mile-thick carapace or mapped band around the west edge of the pluton and is lithologically similar to nearby Sherman Granite, and the quartz monzonite of Roxy Ann Lake, which forms most of the rest of the pluton and is lithologically similar to Silver Plume Granite. An apparent Sherman -Silver Plume dichotomy with similar rock types and similar relative ages is noted throughout Colorado plutons of that age. The Buffalo Pass pluton consists of the quartz monzonite and gra- nodiorite augen gneiss of Buffalo Mountain and equigranular quartz monzonite gneiss. Internal contacts are not exposed. These rocks contribute to an Rb-Sr whole-rock isochron indicating syntectonic emplacement 1.7-1.8 b.y. ago, essentially the same as the metamorphism of the felsic gneiss wallrocks in the area of this report, and of rocks of Boulder Creek age elsewhere in Colorado. The fine-grained porphyry dikes cut the Buffalo Pass pluton, the ultramafics, and some pegmatites. The dikes are within the age range of the Mount Ethel pluton and are older than the mylonite and shear zones. They occur in both an older northwest-trending and a somewhat younger northeast-trending set but do not appear to change compositionally from one set to the other. Regional considerations indicate that they were emplaced between about 1.1 and 1.5 b.y. ago, a time when intermediate to mafic dikes were commonly emplaced throughout Colorado, Wyoming, and southwestern Montana. The pegmatite and ultramafic bodies are not dated directly, but clustering of many pegmatites outside the contacts of the Mount Ethel pluton may indicate a genetic relation of the pegmatites to the Mount Ethel rocks. Fluorite is a common accessory mineral in the rocks of the Mount Ethel pluton; it has not been observed in this area in the petrographically similar rocks of the Buffalo Pass pluton. Fluorite was precipitated most abundantly from the Precambrian magma that formed the quartz monzonite of Roxy Ann Lake. In 70 percent of these rocks fluorite is observed in amounts as great as 2 percent and is successively less abundant in both older and younger plutonic phases. Textural evidence indicates that, although most fluorite is intergrown with and contemporaneous with other magmatic minerals, some fluorite is associated with alteration minerals in a manner demonstrating its mobility since its initial deposition. Five areas of ec

Modeling the Controlled Recrystallization of Particle-Containing Aluminum Alloys

NASA Astrophysics Data System (ADS)

Adam, Khaled; Root, Jameson M.; Long, Zhengdong; Field, David P.

2017-01-01

The recrystallized fraction for AA7050 during the solution heat treatment is highly dependent upon the history of deformation during thermomechanical processing. In this work, a state variable model was developed to predict the recrystallization volume fraction as a function of processing parameters. Particle stimulated nucleation (PSN) was observed as a dominant mechanism of recrystallization in AA7050. The mesoscale Monte Carlo Potts model was used to simulate the evolved microstructure during static recrystallization with the given recrystallization fraction determined already by the state variable model for AA7050 alloy. The spatial inhomogeneity of nucleation is obtained from the measurement of the actual second-phase particle distribution in the matrix identified using backscattered electron (BSE) imaging. The state variable model showed good fit with the experimental results, and the simulated microstructures were quantitatively comparable to the experimental results for the PSN recrystallized microstructure of 7050 aluminum alloy. It was also found that the volume fraction of recrystallization did not proceed as dictated by the Avrami equation in this alloy because of the presence of the growth inhibitors.

Through-thickness recrystallization characteristics of a laminated AA3xxx–AA6xxx aluminum alloy system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liao, L.H., E-mail: l2liao@uwaterloo.ca; Jin, H.; Gallerneault, M.

2015-03-15

The through-thickness annealing behavior of a laminated AA3xxx–AA6xxx alloy system at 300 °C has been studied by scanning electron microscopy, electron backscatter diffraction analysis, electron probe micro-analysis, differential scanning calorimetry, and hardness measurement. Results show that the recrystallization process starts at the interface region between the AA3xxx (clad) and AA6xxx (core) layers. Subsequently, the recrystallization process front progresses into the core layer, while the clad layer is the last region to recrystallize. It is also found that precipitation precedes recrystallization in the entire laminate at the investigated temperature. The preferential onset of recrystallization at the interface region is attributed tomore » the net driving pressure being the highest in this region. The factors that lead to such enhanced net driving pressure are (a) deformation incompatibility between the two alloy layers, (b) lower solute content of the interface, which also leads to lower volume fraction of precipitates, and (c) an accelerated rate of precipitate coarsening due to the presence of a higher density of dislocations. The gradual progress of recrystallization from the interface towards the core layer is dictated by precipitate coarsening and the dependence of its rate on the density of deformation-induced dislocations. The lower driving pressure due to lower work hardening capacity, high solute drag pressure due to Mn, and additional Zener drag from precipitates that form due to solute redistribution during annealing explain the late initiation of recrystallization in the clad layer. - Highlights: • The through-thickness recrystallization of a laminated system is investigated. • The early onset of recrystallization at the interface is discussed. • The effects of precipitation and coarsening on recrystallization are analyzed.« less

Microscopic approach of the crystallization of tripalmitin and tristearin by microscopy.

PubMed

Silva, Roberta Claro da; Martini Soares, Fabiana Andrea Schafer De; Maruyama, Jéssica Mayumi; Dagostinho, Natália Roque; Silva, Ylana Adami; Ract, Juliana Neves Rodrigues; Gioielli, Luiz Antonio

2016-06-01

The crystallization behavior of lipids has important implications in industrial processing of food products, whose physical characteristics depend largely on crystallized fats. The study of the crystallization behavior and polymorphism of a pure lipid system is of great scientific importance as a means of gaining an understanding of the phenomena involved, serving as basic knowledge to help guide the addition or removal of these compounds in different raw materials. The crystallization behavior and polymorphism of pure tripalmitin (PPP) and tristearin (SSS) were investigated by Polarized Light Microscopy (PLM) and Differential Scanning Calorimetry (DSC) under different crystallization conditions. The polymorphic forms (β' and β) of PPP and SSS exhibited different morphologies depending on how they were obtained, either from α form recrystallization or from isotropic melt. Crystallization in the β form was faster in SSS than in PPP, indicating that the process occurs faster in TAGs composed of longer fatty acid chains. Both β' and β polymorphic forms were obtained from α form recrystallization, albeit with predominance of the β form. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Shenyang; Joshi, Vineet; Lavender, Curt A.

Experiments showed that recrystallization dramatically speeds up the gas bubble swelling kinetics in metallic UMo fuels. In this work a recrystallization model is developed to study the effect of microstructures and radiation conditions on recrystallization kinetics. The model integrates the rate theory of intra-granular gas bubble and interstitial loop evolution and a phase field model of recrystallization zone evolution. A fast passage method is employed to describe one dimensional diffusion of interstitials which have diffusivity several order magnitude larger than that of the fission gas Xe. With the model, the effect of grain sizes on recrystallization kinetics is simulated.

Geochronological, geochemical, and Sr-Nd-Hf isotopic characteristics of Cretaceous monzonitic plutons in western Zhejiang Province, Southeast China: New insights into the petrogenesis of intermediate rocks

NASA Astrophysics Data System (ADS)

Liu, Liang; Qiu, Jian-Sheng; Zhao, Jiao-Long; Yang, Ze-Li

2014-05-01

We present comprehensive petrological, geochemical, and Sr-Nd-Hf isotopic data for the Matou and Dalai plutons in western Zhejiang Province, Southeast China, with the aim of constraining the petrogenesis of monzonites and to offer new insights into the deep processes of interaction between crustal- and mantle-derived magmas beneath SE China. The Matou pluton comprises quartz monzonite, whereas the Dalai pluton consists of quartz monzodiorite. Zircon U-Pb ages obtained by laser ablation-inductively coupled plasma-mass spectrometry show that both plutons were emplaced at 99-101 Ma. Rocks of both plutons are intermediate to silicic, metaluminous to weakly peraluminous, subalkaline, and K-rich in composition. Samples of the plutons are enriched in large ion lithophile (e.g., Rb, K, and Pb) and light rare earth elements, depleted in high-field strength elements (e.g., Nb, Ta, and Ti), and have small negative or no Eu anomalies. In addition, the rocks have high Mg# values (up to 53.9), high zircon ɛHf(t) values (up to - 1.4), and low Nb/U and Ta/U ratios. Geochemical evidence suggests that both depleted asthenospheric and metasomatically enriched mantle components were involved in the formation of these monzonitic rocks. The presence of inherited zircons with Palaeoproterozoic ages and zircons with unusually low ɛHf(t) values (- 12.9) in the Matou quartz monzonites indicates that ancient crustal materials were also involved in their petrogenesis. In combination with the presence of abundant mafic microgranular enclaves (MMEs) with spheroidal to ellipsoidal-ovoidal shapes and xenocrysts within the more diffused enclaves, and the results of trace element modelling, we suggest that the Matou quartz monzonites were generated by mixing between mantle-derived mafic magmas and crustally derived silicic magmas. The Dalai pluton is relatively homogeneous and contains fewer MMEs than the Matou pluton. Zircons from the Dalai pluton show no inherited components, indicating that crustal materials have played a limited role in the petrogenesis of the quartz monzodiorites. The Dalai quartz monzodiorites have lower SiO2 contents, higher Mg# values, and considerably higher and variable Cr, Co, and Ni concentrations than the Matou quartz monzonites. Zircon Hf isotopic compositions of the Dalai pluton are relatively homogeneous (ɛHf(t) = - 5.2 to - 3.2). The combined petrological, geochemical, and isotopic features indicate that the Dalai monzodiorites were generated by olivine- and pyroxene-dominated fractional crystallisation from basaltic magmas, which were in turn produced by mixing between melts from depleted asthenosphere and subduction-enriched mantle. Our interpretation implies that Late Mesozoic monzonitic rocks in Southeast China require a significant input of mantle melts, and some may have been generated solely by fractionation of basaltic magmas. This petrogenetic model may be applicable to other monzonitic rocks in Southeast China, and to similar tectonic settings and sites of monzonitic magma generation worldwide.

Volcanic-plutonic connections and metal fertility of highly evolved magma systems: A case study from the Herberton Sn-W-Mo Mineral Field, Queensland, Australia

NASA Astrophysics Data System (ADS)

Cheng, Yanbo; Spandler, Carl; Chang, Zhaoshan; Clarke, Gavin

2018-03-01

Understanding the connection between the highly evolved intrusive and extrusive systems is essential to explore the evolution of high silicic magma systems, which plays an important role in discussions of planetary differentiation, the growth of continents, crustal evolution, and the formation of highly evolved magma associated Sn-W-Mo mineral systems. To discern differences between "fertile" and "non-fertile" igneous rocks associated with Sn-W-Mo mineralization and reveal the genetic links between coeval intrusive and extrusive rocks, we integrate whole rock geochemistry, geochronology and Hf isotope signatures of igneous zircons from contemporaneous plutonic and volcanic rocks from the world-class Herberton Mineral Field of Queensland, Australia. The 310-300 Ma intrusive rocks and associated intra-plutonic W-Mo mineralization formed from relatively oxidized magmas after moderate degrees of crystal fractionation. The geochemical and isotopic features of the coeval volcanic succession are best reconciled utilizing the widely-accepted volcanic-plutonic connection model, whereby the volcanic rocks represent fractionated derivatives of the intrusive rocks. Older intrusions emplaced at 335-315 Ma formed from relatively low fO2 magmas that fractionated extensively to produce highly evolved granites that host Sn mineralization. Coeval volcanic rocks of this suite are compositionally less evolved than the intrusive rocks, thereby requiring a different model to link these plutonic-volcanic sequences. In this case, we propose that the most fractionated magmas were not lost to volcanism, but instead were effectively retained at the plutonic level, which allowed further localized build-up of volatiles and lithophile metals in the plutonic environment. This disconnection to the volcanism and degassing may be a crucial step for forming granite-hosted Sn mineralization. The transition between these two igneous regimes in Herberton region over a ∼30 m.y. period is attributed to a change from an early compressive tectonic environment with a thickened crust, to conditions of crustal thinning and lithospheric extension due to progressive slab rollback. Such tectonic transitions may provide favorable conditions for intrusion-related mineralization. Given the common occurrence of volcanic and plutonic rocks associated with Sn-W-Mo mineralization worldwide, we suggest that a combined understanding of temporal tectonic evolution and plutonic-volcanic connections can assist in assessment of regional-scale mineralization potential, which in turn can aid strategies for future ore deposit exploration.

Syn-extensional plutonism and peak metamorphism in the albion-raft river-grouse creek metamorphic core complex

USGS Publications Warehouse

Strickland, A.; Miller, E.L.; Wooden, J.L.; Kozdon, R.; Valley, J.W.

2011-01-01

The Cassia plutonic complex (CPC) is a group of variably deformed, Oligocene granitic plutons exposed in the lower plate of the Albion-Raft River- Grouse Creek (ARG) metamorphic core complex of Idaho and Utah. The plutons range from granodiorite to garnet-bearing, leucogranite, and during intrusion, sillimanite- grade peak metamorphism and ductile attenuation occurred in the country rocks and normal-sense, amphibolite-grade deformation took place along the Middle Mountain shear zone. U-Pb zircon geochronology from three variably deformed plutons exposed in the lower plate of the ARG metamorphic core complex revealed that each zircon is comprised of inherited cores (dominantly late Archean) and Oligocene igneous overgrowths. Within each pluton, a spread of concordant ages from the Oligocene zircon overgrowths is interpreted as zircon recycling within a long-lived magmatic system. The plutons of the CPC have very low negative whole rock ??Nd values of -26 to -35, and initial Sr values of 0.714 to 0.718, consistent with an ancient, crustal source. Oxygen isotope ratios of the Oligocene zircon overgrowths from the CPC have an average ??18O value of 5.40 ?? 0.63 permil (2SD, n = 65) with a slight trend towards higher ??18O values through time. The ??18O values of the inherited cores of the zircons are more variable at 5.93 ?? 1.51 permil (2SD, n = 29). Therefore, we interpret the plutons of the CPC as derived, at least in part, from melting Archean crust based on the isotope geochemistry. In situ partial melting of the exposed Archean basement that was intruded by the Oligocene plutons of the CPC is excluded as the source for the CPC based on field relationships, age and geochemistry. Correlations between Ti and Hf concentrations in zircons from the CPC suggest that the magmatic system may have become hotter (higher Ti concentration in zircon) and less evolved (lower Hf in zircon concentration) through time. Therefore, the CPC represents prolonged or episodic magmatism system (32-25 Ma), and the intrusions were each accompanied by sillimanite-grade deformation and extension. The Oligocene magmatism and peak metamorphism preserved in the ARG metamorphic core complex are likely related to regional trends in mantle-derived magmatism that led to protracted heating, melting and mobilization of the deeper crust.

Aperçu de precambrien de côte d'Ivoire: geologie-metallogenie

NASA Astrophysics Data System (ADS)

Angoran, Y.; Kadio, E.

The Ivory Coast is situated at the southern limits of the West African Craton and constitute a part of the 'Dorsale de Man'. The precambrian rocks occupy 97% of the superficial area of the country and include rocks of two orogenic episodes: the Liberian (3000-2580 Ma) and the Eburnian of lower Proterozoic (2400-1550 Ma). Liberian Orogeny, which is the most ancient, consists of gneisses, amphibo-pyroxinites, fine-grained itabirites and coarse-grained ferruginous quartzites. The aluminous gneisses, amphibo-pyroxinites and ferruginous quartzites are supracrustals that have been transformed by a high grade Catasonal metamorphism resulting in highly folded rocks. The Liberian plutons are infracrustals consisting of complex basic and ultrabasic rocks, migmatites, charnockites and granites associated with magmatites. This Liberian complex is intruded by some dolerites (2200 Ma), and kimberlites with diamond (2210-2500 Ma) which have been eroded to produce Birrimian placer deposits of Tortiya and Birrim in Ghana. The eburnian geosyncline consists of alternating subparallel intrageosynclines and intrageanticlines. The volcano-sedimentary complexes were intruded by eburnian plutons of 2100-1550 Ma. About 20 different types of mineralisations are common within the Pre-Cambrian rocks of the Ivory Coast and they are of Archaen to lower Proterozoic age. Examples of these mineral concentrations are cited in this paper.

Comparison of thermal modeling, microstructural analysis, and Ti-in-quartz thermobarometry to constrain the thermal history of a cooling pluton during deformation in the Mount Abbot Quadrangle, CA

NASA Astrophysics Data System (ADS)

Nevitt, Johanna M.; Warren, Jessica M.; Kidder, Steven; Pollard, David D.

2017-03-01

Granitic plutons commonly preserve evidence for jointing, faulting, and ductile fabric development during cooling. Constraining the spatial variation and temporal evolution of temperature during this deformation could facilitate an integrated analysis of heterogeneous deformation over multiple length-scales through time. Here, we constrain the evolving temperature of the Lake Edison granodiorite within the Mount Abbot Quadrangle (central Sierra Nevada, CA) during late Cretaceous deformation by combining microstructural analysis, titanium-in-quartz thermobarometry (TitaniQ), and thermal modeling. Microstructural and TitaniQ analyses were applied to 12 samples collected throughout the pluton, representative of either the penetrative "regional" fabric or the locally strong "fault-related" fabric. Overprinting textures and mineral assemblages indicate the temperature decreased from 400-500°C to <350°C during faulting. TitaniQ reveals consistently lower Ti concentrations for partially reset fault-related fabrics (average: 12 ± 4 ppm) than for regional fabrics (average: 31 ± 12 ppm), suggesting fault-related fabrics developed later, following a period of pluton cooling. Uncertainties, particularly in TiO2 activity, significantly limit further quantitative thermal estimates using TitaniQ. In addition, we present a 1-D heat conduction model that suggests average pluton temperature decreased from 585°C at 85 Ma to 332°C at 79 Ma, consistent with radiometric age data for the field. Integrated with the model results, microstructural temperature constraints suggest faulting initiated by ˜83 Ma, when the temperature was nearly uniform across the pluton. Thus, spatially heterogeneous deformation cannot be attributed to a persistent temperature gradient, but may be related to regional structures that develop in cooling plutons.

Petrology and geochemistry of primitive lower oceanic crust from Pito Deep: Implications for the accretion of the lower crust at the Southern East Pacific Rise

USGS Publications Warehouse

Perk, N.W.; Coogan, L.A.; Karson, J.A.; Klein, E.M.; Hanna, H.D.

2007-01-01

A suite of samples collected from the uppermost part of the plutonic section of the oceanic crust formed at the southern East Pacific Rise and exposed at the Pito Deep has been examined. These rocks were sampled in situ by ROV and lie beneath a complete upper crustal section providing geological context. This is only the second area (after the Hess Deep) in which a substantial depth into the plutonic complex formed at the East Pacific Rise has been sampled in situ and reveals significant spatial heterogeneity in the plutonic complex. In contrast to the uppermost plutonic rocks at Hess Deep, the rocks studied here are generally primitive with olivine forsterite contents mainly between 85 and 88 and including many troctolites. The melt that the majority of the samples crystallized from was aggregated normal mid-ocean ridge basalt (MORB). Despite this high Mg# clinopyroxene is common despite model predictions that clinopyroxene should not reach the liquidus early during low-pressure crystallization of MORB. Stochastic modeling of melt crystallisation at various levels in the crust suggests that it is unlikely that a significant melt mass crystallized in the deeper crust (for example in sills) because this would lead to more evolved shallow level plutonic rocks. Similar to the upper plutonic section at Hess Deep, and in the Oman ophiolite, many samples show a steeply dipping, axis-parallel, magmatic fabric. This suggests that vertical magmatic flow is an important process in the upper part of the seismic low velocity zone beneath fast-spreading ridges. We suggest that both temporal and spatial (along-axis) variability in the magmatic and hydrothermal systems can explain the differences observed between the Hess Deep and Pito Deep plutonics. ?? Springer-Verlag 2007.

Natural and anthropogenic radionuclides in rocks and beach sands from Ezine region (Canakkale), Western Anatolia, Turkey.

PubMed

Orgün, Y; Altinsoy, N; Sahin, S Y; Güngör, Y; Gültekin, A H; Karahan, G; Karacik, Z

2007-06-01

This paper represents the first reports on the natural and anthropogenic radionuclides in Kestanbol granitic pluton and surrounding rocks, and coastal region of the Ezine town. To assess the radiological hazard of the natural radioactivity, the radium equivalent activity, the absorbed dose rate and the external hazard index were calculated, and in situ gamma dose rates were measured. The high-activity concentrations were measured in the pluton and sands, which was originated mainly from the pluton, due to the presence of zircon, allanite, monazite, thorite, uranothorite and apatite. The average activity concentrations of (238)U, (232)Th and (40)K are 174.78, 204.69 and 1171.95 Bq kg(-1) for pluton, and 290.36, 532.04 and 1160.75 Bq kg(-1) for sands, respectively. (137)Cs in Ezine region ranged from 0-6.57 Bq kg(-1). The average absorbed dose rate for the granitic and sand samples were calculated to be 251.6 and 527.92 nGy h(-1), respectively. The maximum contribution to the total absorbed gamma dose rate in air was due to the (232)Th (52.3% for pluton and 67.1% for sands). The Raeq activities of the pluton and sands are higher than the recommended maximum value of 370 Bq kg(-1) criterion limit of Raeq activity for building materials.

Theoretical investigation of crack formation in tungsten after heat loads

NASA Astrophysics Data System (ADS)

Arakcheev, A. S.; Huber, A.; Wirtz, M.; Sergienko, G.; Steudel, I.; Burdakov, A. V.; Coenen, J. W.; Kreter, A.; Linke, J.; Mertens, Ph.; Shoshin, A. A.; Unterberg, B.; Vasilyev, A. A.

2015-08-01

Transient events such as ELMs in large plasma devices lead to significant heat load on plasma-facing components (PFCs). ELMs cause mechanical damage of PFCs (e.g. cracks). The cracks appear due to stresses caused by thermal extension. Analytical calculations of the stresses are carried out for tungsten. The model only takes into account the basic features of solid body mechanics without material modifications (e.g. fatigue or recrystallization). The numerical results of the model demonstrate good agreement with experimental data obtained at the JUDITH-1, PSI-2 and GOL-3 facilities.

Stable mineral recrystallization in low temperature aqueous systems: A critical review

NASA Astrophysics Data System (ADS)

Gorski, Christopher A.; Fantle, Matthew S.

2017-02-01

Minerals may undergo recrystallization reactions in low temperature (<100 °C) aqueous systems, during which they exchange isotopes and trace elements with the dissolved reservoir without undergoing overt structural, bulk compositional, or morphological changes. These interfacial reactions, which are often referred to in the literature as "atom exchange" and herein as "stable mineral recrystallization", have important implications for the use of isotopic and elemental proxies to interpret past temperatures, oxidation states, and aqueous chemistries on Earth. The reactions are also significant for modern environments, including engineered systems, as they imply that mineral lattices may be substantially more open to exchanging toxic elements and radionuclides with coexisting solutions than previously thought. To date, observations of stable mineral recrystallization are distributed among several disciplines, and no work has attempted to review their findings comprehensively. Accordingly, this review article presents laboratory evidence for stable mineral recrystallization, describes data collection and interpretation strategies, summarizes similar recrystallization systematics observed in multiple studies, explores the potential occurrence of stable mineral recrystallization in natural systems, and discusses possible mechanisms by which stable mineral recrystallization occurs. The review focuses primarily on carbonates, sulfates, and iron oxides because these minerals have been studied most extensively to date. The review concludes by presenting key questions that should be addressed in this field to further understand and account for stable mineral recrystallization in natural and engineered aqueous systems at low temperatures.

Using a Simulated Industrial Setting for the Development of an Improved Solvent System for the Recrystallization of Benzoic Acid: A Student-Centered Project

ERIC Educational Resources Information Center

Hightower, Timothy R.; Heeren, Jay D.

2006-01-01

Recrystallization of benzoic acid is an excellent way to remove insoluble impurities. In a traditional organic laboratory experiment, insoluble impurities are removed through the recrystallization of benzoic acid utilizing water as the recrystallization solvent. It was our goal to develop a peer-led, problem-solving organic laboratory exercise…

Static Recrystallization Behavior of Z12CN13 Martensite Stainless Steel

NASA Astrophysics Data System (ADS)

Luo, Min; Zhou, Bing; Li, Rong-bin; Xu, Chun; Guo, Yan-hui

2017-09-01

In order to increase the hot workability and provide proper hot forming parameters of forging Z12CN13 martensite stainless steel for the simulation and production, the static recrystallization behavior has been studied by double-pass hot compression tests. The effects of deformation temperature, strain rate and inter-pass time on the static recrystallization fraction by the 2% offset method are extensively studied. The results indicate that increasing the inter-pass time and the deformation temperature as well as strain rate appropriately can increase the fraction of static recrystallization. At the temperature of 1050-1150 °C, inter-pass time of 30-100 s and strain rate of 0.1-5 s-1, the static recrystallization behavior is obvious. In addition, the kinetics of static recrystallization behavior of Z12CN13 steel has been established and the activation energy of static recrystallization is 173.030 kJ/mol. The substructure and precipitates have been studied by TEM. The results reveal that the nucleation mode is bulging at grain boundary. Undissolved precipitates such as MoNi3 and Fe3C have a retarding effect on the recrystallization kinetics. The effect is weaker than the accelerating effect of deformation temperature.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liang, Linyun; Mei, Zhi-Gang; Yacout, Abdellatif M.

We have developed a mesoscale phase-field model for studying the effect of recrystallization on the gas-bubble-driven swelling in irradiated U-Mo alloy fuel. The model can simulate the microstructural evolution of the intergranular gas bubbles on the grain boundaries as well as the recrystallization process. Our simulation results show that the intergranular gas-bubble-induced fuel swelling exhibits two stages: slow swelling kinetics before recrystallization and rapid swelling kinetics with recrystallization. We observe that the recrystallization can significantly expedite the formation and growth of gas bubbles at high fission densities. The reason is that the recrystallization process increases the nucleation probability of gasmore » bubbles and reduces the diffusion time of fission gases from grain interior to grain boundaries by increasing the grain boundary area and decreasing the diffusion distance. The simulated gas bubble shape, size distribution, and density on the grain boundaries are consistent with experimental measurements. We investigate the effect of the recrystallization on the gas-bubble-driven fuel swelling in UMo through varying the initial grain size and grain aspect ratio. We conclude that the initial microstructure of fuel, such as grain size and grain aspect ratio, can be used to effectively control the recrystallization and therefore reduce the swelling in U-Mo fuel.« less

Ion-specific ice recrystallization provides a facile approach for the fabrication of porous materials

NASA Astrophysics Data System (ADS)

Wu, Shuwang; Zhu, Chongqin; He, Zhiyuan; Xue, Han; Fan, Qingrui; Song, Yanlin; Francisco, Joseph S.; Zeng, Xiao Cheng; Wang, Jianjun

2017-05-01

Ice recrystallization is of great importance to both fundamental research and practical applications, however understanding and controlling ice recrystallization processes remains challenging. Here, we report the discovery of an ion-specific effect on ice recrystallization. By simply changing the initial type and concentration of ions in an aqueous solution, the size of ice grains after recrystallization can be tuned from 27.4+/-4.1 to 277.5+/-30.9 μm. Molecular dynamics simulations show that the ability of the ion to be incorporated into the ice phase plays a key role in the ultimate size of the ice grains after recrystallization. Moreover, by using recrystallized ice crystals as templates, 2D and 3D porous networks with tuneable pore sizes could be prepared from various materials, for example, NaBr, collagen, quantum dots, silver and polystyrene colloids. These porous materials are suitable for a wide range of applications, for example, in organic electronics, catalysis and bioengineering.

Microstructural evolution and rheology of quartz in a mid-crustal shear zone

NASA Astrophysics Data System (ADS)

Rahl, Jeffrey M.; Skemer, Philip

2016-06-01

We present microstructural and crystallographic preferred orientation (CPO) data on quartz deformed in the middle crust to explore the interaction and feedback between dynamic recrystallization, deformation processes, and CPO evolution. The sample investigated here is a moderately deformed quartz-rich mylonite from the Blue Ridge in Virginia. We have created high-resolution crystallographic orientation maps using electron backscatter diffraction (EBSD) of 51 isolated quartz porphyroclasts with recrystallized grain fractions ranging from 10 to 100%. Recrystallized grains are internally undeformed and display crystallographic orientations dispersed around the orientation of the associated parent porphyroclast. We document a systematic decrease in fabric intensity with recrystallization, suggesting that progressive deformation of the recrystallized domains involves processes that can weaken a pre-existing CPO. Relationships between recrystallization fraction and shear strain suggest that complete microstructural re-equilibration requires strains in excess of γ = 5. Variation in the degree of recrystallization implies that strain was accumulated heterogeneously, and that a steady-state microstructure and rheology were not achieved.

Ion-specific ice recrystallization provides a facile approach for the fabrication of porous materials

PubMed Central

Wu, Shuwang; Zhu, Chongqin; He, Zhiyuan; Xue, Han; Fan, Qingrui; Song, Yanlin; Francisco, Joseph S.; Zeng, Xiao Cheng; Wang, Jianjun

2017-01-01

Ice recrystallization is of great importance to both fundamental research and practical applications, however understanding and controlling ice recrystallization processes remains challenging. Here, we report the discovery of an ion-specific effect on ice recrystallization. By simply changing the initial type and concentration of ions in an aqueous solution, the size of ice grains after recrystallization can be tuned from 27.4±4.1 to 277.5±30.9 μm. Molecular dynamics simulations show that the ability of the ion to be incorporated into the ice phase plays a key role in the ultimate size of the ice grains after recrystallization. Moreover, by using recrystallized ice crystals as templates, 2D and 3D porous networks with tuneable pore sizes could be prepared from various materials, for example, NaBr, collagen, quantum dots, silver and polystyrene colloids. These porous materials are suitable for a wide range of applications, for example, in organic electronics, catalysis and bioengineering. PMID:28462937

Ion-specific ice recrystallization provides a facile approach for the fabrication of porous materials.

PubMed

Wu, Shuwang; Zhu, Chongqin; He, Zhiyuan; Xue, Han; Fan, Qingrui; Song, Yanlin; Francisco, Joseph S; Zeng, Xiao Cheng; Wang, Jianjun

2017-05-02

Ice recrystallization is of great importance to both fundamental research and practical applications, however understanding and controlling ice recrystallization processes remains challenging. Here, we report the discovery of an ion-specific effect on ice recrystallization. By simply changing the initial type and concentration of ions in an aqueous solution, the size of ice grains after recrystallization can be tuned from 27.4±4.1 to 277.5±30.9 μm. Molecular dynamics simulations show that the ability of the ion to be incorporated into the ice phase plays a key role in the ultimate size of the ice grains after recrystallization. Moreover, by using recrystallized ice crystals as templates, 2D and 3D porous networks with tuneable pore sizes could be prepared from various materials, for example, NaBr, collagen, quantum dots, silver and polystyrene colloids. These porous materials are suitable for a wide range of applications, for example, in organic electronics, catalysis and bioengineering.

Regional and contact metamorphism within the Moy Intrusive Complex, Grampian Highlands, Scotland

NASA Astrophysics Data System (ADS)

Zaleski, E.

1985-04-01

In central Scotland, the Moy Intrusive Complex consists of (1) the Main Phase — syntectonic peraluminous granodiorite to granite emplaced at c. 455 Ma, intruded by (2) the Finglack Alaskite — post-tectonic leucocratic granite emplaced at 407+/-5 Ma. The Main Phase was emplaced into country rocks at amphibolite facies temperatures. Rb-Sr dates and a compositional spectrum of decreasing celadonite content in Main Phase muscovite suggest the persistence of c. 550° C temperatures for c. 30 Ma but with a declining pressure regime, i.e. isothermal uplift. The Finglack Alaskite was intruded at high structural level, leading to the development of a contact metamorphic aureole in the Main Phase. The thermal effects of contact metamorphism include intergrowths of andalusite, biotite and feldspar in pseudomorphs after muscovite. This is associated with recrystallized granoblastic quartz. Muscovite breakdown and reaction with adjacent biotite, quartz and feldspar, i.e. a function of local mineral assemblage rather than bulk rock composition, is postulated to explain the occurrence of metamorphic andalusite in a granitoid rock. The Main Phase pluton of the Moy Intrusive Complex lies within a NNE trending belt of c. 450 Ma Caledonian tectonic and magmatic activity paralleling the Moine Thrust, and extending from northern Scotland to the Highland Boundary Fault. Syntectonic ‘S-type’ magmatism with upper crustal source areas implies crustal thickening and suggests an intracratonic orogeny.

Use of EBSD Data in Numerical Analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Becker, R; Wiland, H

2000-01-14

Experimentation, theory and modeling have all played vital roles in defining what is known about microstructural evolution and the effects of microstructure on material properties. Recently, technology has become an enabling factor, allowing significant advances to be made on several fronts. Experimental evidence of crystallographic slip and the basic theory of crystal plasticity were established in the early 20th Century, and the theory and models evolved incrementally over the next 60 years. (Asaro provides a comprehensive review of the mechanisms and basic plasticity models.) During this time modeling was primarily concerned with the average response of polycrystalline aggregates. While somemore » detailed finite element modeling (FEM) with crystal plasticity constitutive relations was done in the early 1980s, such simulations over taxed the capabilities of the available computer hardware. Advances in computer capability led to a flurry of activity in finite element modeling in the next 10 years, increasing understanding of microstructure evolution and pushing the limits of theories and material characterization. Automated Electron Back Scatter Diffraction (EBSD) has produced a similar revolution in material characterization. The data collected is extensive and many questions about the evolution of microstructure and its role in determining mechanic properties can now be addressed. It is also now possible to obtain sufficient information about lattice orientations on a fine enough scale to allow detailed quantitative comparisons of experiments and newly emerging large scale numerical simulations. The insight gained from the coupling of EBSD and FEM studies will provide impetus for further development of microstructure models and theories of microstructure evolution. Early studies connecting EBSD data to finite element models used manual measurements to define initial orientations for the simulation. In one study, manual measurements of the deformed structure were also obtained for comparison with the model predictions. More recent work has taken advantage of automated data collection on deformed specimens as a means of collecting detailed and spatially correlated data for model validation. Although it will not be discussed in detail here, another area in which EBSD data is having a great impact is on recrystallization modeling. EBSD techniques can be used to collect data for quantitative microstructural analysis. This data can be used to infer growth kinetics of specific orientations, and this information can be synthesized into more accurate grain growth or recrystallization models. Another role which EBSD techniques may play is in determining initial structures for recrystallization models. A realistic starting structure is vital for evaluating the models, and attempts at predicting realistic structures with finite element simulations are not yet successful. As methodologies and equipment resolution continue to improve, it is possible that measured structures will serve as input for recrystallization models. Simulations have already been run using information obtained manually from a TEM.« less

Using Oxygen Isotopes of Zircon to Evaluate Magmatic Evolution and Crustal Contamination in the Halifax Pluton, Nova Scotia

NASA Astrophysics Data System (ADS)

Murray, K. E.; Lackey, J.; Valley, J. W.; Nowak, R.

2007-12-01

Oxygen isotope analysis of zircon (Zrc) is well suited for parsing out the magmatic history in granitoids. The Halifax pluton is the largest pluton (1060 km2) in the peraluminous South Mountain batholith. The Halifax pluton is mapped as a concentrically zoned body, with outer units comprising granodiorite, monzogranite and a mafic porphyry; these units are locally rich in metasedimentary xenoliths and magmatic enclaves. The exterior units surround a more felsic core of leucogranite [1]. Previous oxygen isotope studies of the pluton report high whole rock δ18O values that range from 10.7-11.7‰ [2], and indicate a significant supracrustal component in the source of the pluton. We report the first δ18O(Zrc) values from the Peggy's Cove monzogranite and an associated mafic porphyry. Samples were collected across 30 km of discontinuous exposures of the monzogranite. Values of δ18O(Zrc) vary from 7.71-8.26‰ (average = 8.15±±0.32‰(2 S.D.); n = 10). Small but systematic E-W regional variation in δ18O(Zrc) values suggests heterogeneous magmatic contamination within the monzogranite. Meter-scale magmatic enclaves, observed in close association with pods of diverse xenoliths and smaller enclaves at the western Cranberry Head locality, are slightly enriched in δ18O relative to the host monzogranite. These data combined support a model of magma mingling and heterogeneous mixing at the rim of the pluton, with contamination by high-δ18O rocks. Additional high-δ18O(Zrc) data from granodiorites on the northern margin of the Halifax pluton concur with these observations [3]. Typically, closed magmatic systems show increasing δ18O with SiO2 because more felsic magmas have a greater percentage of high-δ18O minerals such as quartz and feldspar. Thus, the Halifax pluton appears to exhibit an enrichment trend opposite of what would be expected of a closed evolving system. Emplacement mechanisms for the Halifax pluton proposed by previous workers suggest that the outer units intruded first, followed by the more felsic luecogranites at the core of the pluton [1]. Based on δ18O(Zrc) data, we propose a model in which early magmas were already enriched in δ18O from a metasedimentary source; during emplacement, the magmas mixed with and variably assimilated high δ18O(10-13‰; [2]) Meguma Group metasedimentary wallrocks and melts thereof, which increased the δ18O of the magma. The first magmas emplaced cleared the way for later, more evolved magmas to intrude without significant contact with country rock. Additionally, δ18O (Zrc) values are in disequilibrium with published whole rock and quartz δ18O values from the pluton, indicating that progressive contamination or subsolidus isotopic exchange elevated whole rock δ18O of the monzogranite after zircon crystallization. 1. M. A. MacDonald, R. J. Horne, Maritime Seds Atlantic Geol 24, 33 (1988). 2. F. J. Longstaffe, T. E. Smith, K. Muehlenbachs, Can J Earth Sci 17, 132 (1980). 3. R. M. Nowak, J. S. Lackey, J. W. Valley, GSA Abs (2007).

Preliminary geologic map of the Winchester 7.5' quadrangle, Riverside County, California

USGS Publications Warehouse

Morton, Douglas M.

2003-01-01

The Winchester quadrangle is located in the northern part of the Peninsular Ranges Province within the central part of the Perris block, a relatively stable, rectangular in plan view, area located between the Elsinore and San Jacinto fault zones (see location map). The quadrangle is underlain by Cretaceous and older basement rocks. Cretaceous plutonic rocks are part of the composite Peninsular Ranges batholith, which indicates wide variety of granitic rocks, ranging from granite to gabbro. Parts of three major plutonic complexes are within the quadrangle, the Lakeview Mountains pluton, the Domenigoni Valley pluton and the Paloma Valley ring complex. In the northern part of the quadrangle is the southern part of the Lakeview Mountains pluton, a large composite body, most of which lies in the quadrangle to the north. In the center part of the quadrangle is the eastern part of the Domenigoni Valley pluton, which consists of massive biotite-hornblende granodiorite and tonalite; some tonalite in the southern part of the pluton has a relatively pronounced foliation produced by oriented biotite and hornblende. Common to abundant equant-shaped, mafic inclusions occur through out the pluton except in the outermost part where inclusions are absent. The pluton was passively emplaced by piecemeal stoping of a variety of older rocks and the eastern contact is well exposed in the quadrangle. Associated with the Domenigoni Valley pluton is a swarm of latite dikes; the majority of these dikes occur in the Winchester quadrangle, but they extend into the Romoland quadrangle to the west. The latite dikes intrude both the pluton and adjacent metamorphic rocks, most are foliated, and most have a well developed lineation defined by oriented biotite and/or hornblende crystals. Dikes intruding the pluton were emplaced in northwest striking joints; and dikes intruding the metamorphic rocks were emplaced along foliation planes. In the eastern part of the quadrangle a Cretaceous age suture juxtaposes low-metamorphic grade Mesozoic rocks against high-metamorphic grade gneissic-textured Mesozoic rocks. Juxtaposition occurred when the high-metamorphic grade rocks were at upper amphibolite grade temperatures, and produced a steep thermal gradient in the low-metamorphic grade Mesozoic rocks. Age of suturing and attendant metamorphism, based on metamorphic mineral ages, is about 100 Ma (L. Snee, personal communication, 2002). The suture zone appears to vary in thickness, and includes within it a number of metadunite bodies and related rocks. Prebatholithic rocks of Mesozoic age include a wide variety of sedimentary rocks of greenschist or lower metamorphic grade, in the western and central part of the quadrangle, and upper amphibolite grade near the eastern edge of the quadrangle. The metamorphic grade increases from greenschist to upper amphibolite grade over a distance of less than two miles; andalusite and sillimanite isograds are closely spaced near the suture. Metamorphism was Buchan type of relatively high temperature and relatively low pressure (Schwarcz, 1969). Common lithologies of the low metamorphic grade suite include phyllite, lithic greywacke, impure quartzite, meta-arkose, and interlayered quartzite and phyllite. Most of the layering and foliation in the metamorphic rocks is the result of intense structural transposition. Relic bedding appears to be restricted to very local occurrences in hinges of slip folds. The upper amphibolite grade, gneissic-textured Mesozoic rocks consist of sillimanite-biotite gneiss, black amphibolite, and impure quartzite. Anatectic gneiss containing igneous textured segregations of quartz and feldspar is commonly inter leaved with biotite gneiss.

Strontium and oxygen isotopic variations in Mesozoic and Tertiary plutons of central Idaho

USGS Publications Warehouse

Fleck, R.J.; Criss, R.E.

1985-01-01

Regional variations in initial 87Sr/86Sr ratios (ri) of Mesozoic plutons in central Idaho locate the edge of Precambrian continental crust at the boundary between the late Paleozoic-Mesozoic accreted terranes and Precambrian sialic crust in western Idaho. The ri values increase abruptly but continuously from less than 0.704 in the accreted terranes to greater than 0.708 across a narrow, 5 to 15 km zone, characterized by elongate, lens-shaped, highly deformed plutons and schistose metasedimentary and metavolcanic units. The chemical and petrologic character of the plutons changes concomitantly from ocean-arc-type, diorite-tonalite-trondhjemite units to a weakly peraluminous, calcic to calcalkalic tonalite-granodiorite-granite suite (the Idaho batholith). Plutons in both suites yield Late Cretaceous ages, but Permian through Early Cretaceous bodies are confined to the accreted terranes and early Tertiary intrusions are restricted to areas underlain by Precambrian crust. The two major terranes were juxtaposed between 75 and 130 m.y. ago, probably between 80 and 95 m.y. Oxygen and strontium isotopic ratios and Rb and Sr concentrations of the plutonic rocks document a significant upper-crustal contribution to the magmas that intrude Precambrian crust. Magmas intruding the arc terranes were derived from the upper mantle/subducted oceanic lithosphere and may have been modified by anatexis of earlier island-arc volcanic and sedimentary units. Plutons near the edge of Precambrian sialic crust represent simple mixtures of the Precambrian wall-rocks with melts derived from the upper mantle or subducted oceanic lithosphere with ri of 0.7035. Rb/Sr varies linearly with ri, producing "pseudoisochrons" with apparent "ages" close to the age of the wall rocks. Measured ??18O values of the wall rocks are less than those required for the assimilated end-member by Sr-O covariation in the plutons, however, indicating that wall-rock ??18O was reduced significantly by exchange with circulating fluids. Metasedimentary rocks of the Belt Supergroup are similarly affected near the batholith, documenting a systematic depletion in 18O as much as 50 km from the margin of the batholith. Plutons of the Bitterroot lobe of the Idaho batholith are remote from the accreted terranes and represent mixtures of Precambrian wall-rocks with melts dominated by continental lower crust (ri>0.708) rather than mantle. "Pseudoisochrons" resulting from these data are actually mixing lines that yield apparent "ages" less than the true age of the wall rocks and meaningless "ri". Assimilation/ fractional-crystallization models permit only insignificant amounts of crystal fractionation during anatexis and mixing for the majority of plutons of the region. ?? 1985 Springer-Verlag.

Plutonism at Different Crustal Levels of an Arc: Insights From the 5 to 40 km (Paleodepth) North Cascades Crustal Section, Washington

NASA Astrophysics Data System (ADS)

Miller, R. B.; Paterson, S. R.; Matzel, J. P.

2008-12-01

The crystalline core of the North Cascades preserves a Cretaceous crustal section that facilitates evaluation of pluton construction, emplacement, geometry, composition, and deformation at widely variable crustal levels (~5 to 40 km paleodepth) in a thick (> 55 km) continental magmatic arc. The oldest and largest pulse of plutonism was focused between 96-89 Ma when fluxes were a minimum of 3.9x10-6km3/yr/km of arc length, but the coincidence with regional crustal thickening and underthrusting of a cool outboard terrane resulted in relatively low mid- to deep-crustal temperatures for an arc. A second, smaller peak of magmatism at 78-71 Ma (minimum of 8.2x10-7km3/yr/km of arc length) occurred during regional transpression. Tonalite dominates at all levels of the section. Intrusions range from large plutons to thin (< 50 m) dispersed sheets encased in metamorphic rocks that record less focused magmatism. The percentage of igneous rocks increases systematically from shallow to middle to deep levels; from approximately 37% to 55% to 65% of the total rock volume. Unfocused magmas comprise much higher percentages (approximately 19%) of the total plutonic rock at deep- and mid-crustal depths, but only 1% at shallower levels, whereas the largest intrusions were emplaced into shallow crust. Plutons have a range of shapes, including: asymmetric wedges to funnels; subhorizontal tabular sheets; steep-sided, blade-shaped bodies with high aspect ratios in map view; and steep-sided, vertically extensive (> 8 km) bodies shaped like thick disks and/or hockey pucks. Sheeted intrusions and gently dipping tabular bodies are more common with depth. Some of these plutons fit the model that most intrusions are subhorizontal and tabular, but many do not, reflecting the complex changes in lithology and rheology in arc crust undergoing regional shortening. The steep sheeted plutons partly represent magma transfer zones that fed the large shallow plutons, which were sites of intermittent magma accumulation for up to 5.5 m.y. Downward movement of host rocks by multiple processes occurred at all crustal levels during pluton emplacement. Ductile flow and accompanying rigid rotation were the dominant processes; stoping played an important secondary role, and magma wedging and regional deformation also aided emplacement. Overall, there are some striking changes with increasing depth, but many features and processes in the arc are similar throughout the crustal section, probably reflecting the relatively small differences in peak temperatures between the mid- and deep crust. Such patterns may be representative of thick continental magmatic arcs constructed during regional shortening.

Spatial distribution of quartz recrystallization microstructures across the Aar massif (Swiss Central Alps)

NASA Astrophysics Data System (ADS)

Peters, M.; Herwegh, M.

2012-04-01

In the Aar massif, main foliation and major deformation structures were developed during NW-SE compression associated with the Alpine orogeny (Steck 1968). To be precise, shearing at the brittle to ductile transition may have initiated at different stages between 22-20 Ma and 14-12 Ma, followed by purely brittle deformation at around 10 Ma (Rolland et al. 2009). In light of the onset of dynamic recrystallization in quartz, Bambauer et al. (2009) defined a quartz recrystallization isograd in the northern part of the Aar massif. To the south, the grain size of recrystallized grains increases due to an increase of metamorphic temperatures from N to S. The aim of the current project is to carry out quantitative analysis on changes of the dynamic and static recrystallization behavior of quartz. Across the Aar massif, two general types of microstructures have to be discriminated: (i) weakly to moderately deformed host rocks and (ii) intensely deformed mylonites to ultramylonites out of high strain shear zones. In (i), volume fraction and size of recrystallized quartz grains increase towards the S showing grain size changes from around 5 µm up to ca. 200 µm. Southern microstructures are characterized by complete recrystallization. In terms of recrystallization processes, a transition from bulging recrystallization in the N to subgrain rotation recrystallization in the S occurs. Such a change in dynamic recrystallization processes combined with a grain size increase points towards reduced differential stresses with increasing temperature. This temperature gradient is also corroborated by a switch in the active glide systems in quartz from basal to rhomb dominated glide. In contrast to the granitic host rocks, the mylonites and ultramylonites (ii) show smaller recrystallized grain sizes due to enhanced strain rates. However, they also reveal a general increase of recrystallized grain sizes from N to S. In the S, microstructures from (i) and (ii) show equidimensional grains with 120° triple junctions and straight grain boundaries. Such microstructures are typical for static annealing. For that reason, we propose a post-deformational temperature pulse mainly affecting the southern part of the Aar massif. This annealing stage might correlate with the fluid pulse between 12-10 Ma suggested by Challandes et al. (2008). We will present constraints on the grade of deformation based on grain size data and CPO analyses, supporting the hypothesis that various deformation stages are well preserved in statically recrystallized structures.

Geochronology of plutonic rocks and their tectonic terranes in Glacier Bay National Park and Preserve, southeast Alaska: Chapter E in Studies by the U.S. Geological Survey in Alaska, 2008-2009

USGS Publications Warehouse

Brew, David A.; Tellier, Kathleen E.; Lanphere, Marvin A.; Nielsen, Diane C.; Smith, James G.; Sonnevil, Ronald A.

2014-01-01

We have identified six major belts and two nonbelt occurrences of plutonic rocks in Glacier Bay National Park and Preserve and characterized them on the basis of geologic mapping, igneous petrology, geochemistry, and isotopic dating. The six plutonic belts and two other occurrences are, from oldest to youngest: (1) Jurassic (201.6–145.5 Ma) diorite and gabbro of the Lituya belt; (2) Late Jurassic (161.0–145.5 Ma) leucotonalite in Johns Hopkins Inlet; (3) Early Cretaceous (145.5–99.6 Ma) granodiorite and tonalite of the Muir-Chichagof belt; (4) Paleocene tonalite in Johns Hopkins Inlet (65.5–55.8 Ma); (5) Eocene granodiorite of the Sanak-Baranof belt; (6) Eocene and Oligocene (55.8–23.0 Ma) granodiorite, quartz diorite, and granite of the Muir-Fairweather felsic-intermediate belt; (7) Eocene and Oligocene (55.8–23.0 Ma) layered gabbros of the Crillon-La Perouse mafic belt; and (8) Oligocene (33.9–23.0 Ma) quartz monzonite and quartz syenite of the Tkope belt. The rocks are further classified into 17 different combination age-compositional units; some younger belts are superimposed on older ones. Almost all these plutonic rocks are related to Cretaceous and Tertiary subduction events. The six major plutonic belts intrude the three southeast Alaska geographic subregions in Glacier Bay National Park and Preserve, from west to east: (1) the Coastal Islands, (2) the Tarr Inlet Suture Zone (which contains the Border Ranges Fault Zone), and (3) the Central Alexander Archipelago. Each subregion includes rocks assigned to one or more tectonic terranes. The various plutonic belts intrude different terranes in different subregions. In general, the Early Cretaceous plutons intrude rocks of the Alexander and Wrangellia terranes in the Central Alexander Archipelago subregion, and the Paleogene plutons intrude rocks of the Chugach, Alexander, and Wrangellia terranes in the Coastal Islands, Tarr Inlet Suture Zone, and Central Alexander Archipelago subregions.

Intrusive rocks and plutonic belts of southeastern Alaska, U.S.A.

USGS Publications Warehouse

Brew, David A.; Morrell, Robert P.; Roddick, J.A.

1983-01-01

About 30 percent of the 175,000-km2 area of southeastern Alaska is underlain by intrusive igneous rocks. Compilation of available information on the distribution, composition, and ages of these rocks indicates the presence of six major and six minor plutonic belts. From west to east, the major belts are: the Fairweather-Baranof belt of early to mid-Tertiary granodiorite; the Muir-Chichagof belt of mid-Cretaceous tonalite and granodiorite; the Admiralty-Revillagigedo belt of porphyritic granodiorite, quartz diorite, and diorite of probable Cretaceous age; the Klukwan-Duke belt of concentrically zoned or Alaskan-type ultramafic-mafic plutons of mid-Cretaceous age within the Admiralty-Revillagigedo belt; the Coast Plutonic Complex sill belt of tonalite of unknown, but perhaps mid-Cretaceous, age; and the Coast Plutonic Complex belt I of early to mid-Tertiary granodiorite and quartz monzonite. The minor belts are distributed as follows: the Glacier Bay belt of Cretaceous and(or) Tertiary granodiorite, tonalite, and quartz diorite lies within the Fair-weather-Baranof belt; layered gabbro complexes of inferred mid-Tertiary age lie within and are probably related to the Fairweather-Baranof belt; the Chilkat-Chichagof belt of Jurassic granodiorite and tonalite lies within the Muir-Chichagof belt; the Sitkoh Bay alkaline, the Kendrick Bay pyroxenite to quartz monzonite, and the Annette and Cape Fox trondhjemite plutons, all interpreted to be of Ordovician(?) age, together form the crude southern southeastern Alaska belt within the Muir-Chichagof belt; the Kuiu-Etolin mid-Tertiary belt of volcanic and plutonic rocks extends from the Muir-Chichagof belt eastward into the Admiralty-Revillagigedo belt; and the Behm Canal belt of mid- to late Tertiary granite lies within and next to Coast Plutonic Complex belt II. In addition, scattered mafic-ultramafic bodies occur within the Fairweather-Baranof, Muir-Chichagof, and Coast Plutonic Complex belts I and II. Palinspastic reconstruction of 200 km of right-lateral movement on the Chatham Strait fault does not significantly change the pattern of the major belts but does bring parts of the minor mid-Tertiary and Ordovician(?) belts closer together. The major belts are related to the stratigraphic-tectonic terranes of Berg, Jones, and Coney (1978) as follows: the Fairweather-Baranof belt is largely in the Chugach, Wrangell (Wrangellia), and Alexander terranes; the Muir-Chichagof belt is in the Alexander and Wrangell terranes; the Admiralty-Revillagigedo belt is in the Gravina and Taku terranes; the Klukwan-Duke belt is in the Gravina, Taku, and Alexander terranes; the Coast Plutonic Complex sill belt is probably between the Taku and Tracy Arm terranes; and the Coast Plutonic Complex belts I and II are in the Tracy Arm and Stikine terranes. Significant metallic-mineral deposits are spatially related to certain of these belts, and some deposits may be genetically related. Gold, copper, and molybdenum occurrences may be related to granodiorites of the Fairweather-Baranof belt. Magmatic copper-nickel deposits occur in the layered gabbro within that belt. The Juneau gold belt, which contains gold, silver, copper, lead, and zinc occurrences, parallels and lies close to the Coast Plutonic Complex sill belt; iron deposits occur in the Klukwan-Duke belt; and porphyry molybdenum deposits occur in the Behm Canal belt. The Muir-Chichagof belt of mid-Cretaceous age and the Admiralty-Revillagigedo belt of probable Cretaceous age are currently interpreted as possible magmatic arcs associated with subduction events. In general, the other belts of intrusive rocks are spatially related to structural discontinuities, but genetic relations, if any, are not yet known. The Coast Plutonic Complex sill belt is probably related to a post-Triassic, pre-early Tertiary suture zone that nearly corresponds to the boundary between the Tracy Arm and Taku terranes. The boundary between the Admiralty-Revillagigedo and Muir-Chichagof belts coincides nearly with the Seymour Canal-Clarence Strait lineament and also is probably a major post-Triassic suture.

Preliminary Geologic Map of the Hemet 7.5' Quadrangle, Riverside County, California

USGS Publications Warehouse

Morton, Douglas M.; Matti, Jon C.

2005-01-01

The Hemet 7.5' quadrangle is located near the eastern edge of the Perris block of the Peninsular Ranges batholith. The northeastern corner of the quadrangle extends across the San Jacinto Fault Zone onto the edge of the San Jacinto Mountains block. The Perris block is a relatively stable area located between the Elsinore Fault Zone on the west and the San Jacinto Fault Zone on the east. Both of the fault zones are active; the San Jacinto being the seismically most active in southern California. The fault zone is obscured by very young alluvial deposits. The concealed location of the San Jacinto Fault Zone shown on this quadrangle is after Sharp, 1967. The geology of the quadrangle is dominated by Cretaceous tonalite formerly included in the Coahuila Valley pluton of Sharp (1967). The northern part of Sharp's Coahuila Valley pluton is separated out as the Hemet pluton. Tonalite of the Hemet pluton is more heterogeneous than the tonalite of the Coahuila Valley pluton and has a different sturctural pattern. The Coahuila Valley pluton consists of relatively homogeneous hornblende-biotite tonalite, commonly with readily visible large euhedral honey-colored sphene crystals. Only the tip of the adjacent Tucalota Valley pluton, another large tonalite pluton, extends into the quadrangle. Tonalite of the Tucalota Valley pluton is very similar to the tonalite of the Coahuila Valley pluton except it generally lacks readily visible sphene. In the western part of the quadrangle a variety of amphibolite grade metasedimentary rocks are informally referred to as the rocks of Menifee Valley; named for exposures around Menifee Valley west of the Hemet quadrangle. In the southwestern corner of the quadrangle a mixture of schist and gneiss marks a suture that separated low metamorphic grade metasedimentary rocks to the west from high metamorphic grade rocks to the east. The age of these rocks is interpreted to be Triassic and the age of the suturing is about 100 Ma, essentially the same age as the adjacent Coahuila Valley pluton. Rocks within the suture zone consist of a mixture of lithologies from both sides of the suture. Gneiss, schist, and anatectic gneiss are the predominate lithologies within the rocks on the east side of the suture. Lesser amounts of metalithic greywacke and lenticular masses of black amphibolite are subordinate rock types. Biotite, biotite-sillimanite and lesser amounts of garnet-biotite-sillimanite schist and metaquartzite-metalithic greywacke lithologies occur west of the suture. Pleistocene continental beds, termed the Bautista beds occur east of the San Jacinto Fault Zone in the northeast corner of the quadrangle. Most of the Bautista beds were derived from the San Jacinto pluton that is located just to the east of the sedimentary rocks. Along the northern part of the quadrangle is the southern part of a large Holocene-late Pleistocene fan emanating from Baustista Canyon. Sediments in the Bautista fan are characterized by their content of detritus derived from amphibolite grade metasedimentary rocks located in the Bautista Canyon drainage. Between the Holocene-late Pleistocene Bautista fan and the Santa Rosa Hills is the remnant of a much older Bautista Canyon alluvial fan. A pronounced Holocene-late Pleistocene channel was developed along the south fringe of the very old alluvial fan and the Santa Rosa Hill. A now dissected late to middle Pleistocene alluvial complex was produced by the coalesced fans of Goodhart, St. Johns, and Avery canyons, and Cactus Valley. Pleistocene continental beds, termed the Bautista beds occur east of the San Jacinto Fault Zone in the northeast corner of the quadrangle. Most of the Bautista beds were derived from the San Jacinto pluton that is located just to the east of the sedimentary rocks. Along the northern part of the quadrangle is the southern part of a large Holocene-late Pleistocene fan emanating from Baustista Canyon. Sediments in the Bautista fan are characterized by

Solvent Selection for Recrystallization: An Undergraduate Organic Experiment.

ERIC Educational Resources Information Center

Baumann, Jacob B.

1979-01-01

This experiment develops the students' ability to carry out a simple recrystallization effectively, and demonstrates how a solvent may be selected or rejected for the recrystallization of a specific organic compound. (Author/BB)

K-Ar geochronology of basement rocks on the northern flank of the Huancabama deflection, Ecuador

USGS Publications Warehouse

Feininger, Tomas; Silberman, M.L.

1982-01-01

The Huancabamba deflection, a major Andean orocline located at the Ecuador-Peru border, constitutes an important geologic boundary on the Pacific coast of South America. Crust to the north of the deflection is oceanic and the basement is composed of basic igneous rocks of Cretaceous age, whereas crust to the south is continental and felsic rocks of Precambrian to Cretaceous age make up the basement. The northern flank of the Huancabamba Deflection in El Oro Province, Ecuador, is underlain by Precambrian polymetamorphic basic rocks of the Piedras Group; shale, siltstone, sandstone, and their metamorphosed equivalents in the Tahuin Group (in part of Devonian age); concordant syntectonic granitic rocks; quartz diorite and alaskite of the Maroabeli pluton; a protrusion of serpentinized harzburgite that contains a large inclusion of blueschist-facies metamorphic rocks, the Raspas Formation, and metamorphic rocks north of the La Palma fault. Biotite from gneiss of the Tahuin Group yields a Late Triassic K-Ar age (210 ? 8 m.y.). This is interpreted as an uplift age and is consistent with a regional metamorphism of Paleozoic age. A nearby sample from the Piedras Group that yielded a hornblende K-Ar age of 196 ? 8 m.y. was affected by the same metamorphic event. Biotite from quartz diorite of the mesozonal Maroabeli pluton yields a Late Triassic age (214 ? 6 m.y.) which is interpreted as an uplift age which may be only slightly younger than the age of magmatic crystallization. Emplacement of the pluton may postdate regional metamorphism of the Tahuin Group. Phengite from politic schist of the Raspas Formation yields an Early Cretaceous K-Ar age (132 ? 5 m.y.). This age is believed to date the isostatic rise of the encasing serpentinized harzburgite as movement along a subjacent subduction zone ceased, and it is synchronous with the age of the youngest lavas of a coeval volcanic arc in eastern Ecuador. A Late Cretaceous K-Ar age (74.4 ? 1.1 m.y.) from hornblende in amphibolite north of the La Palma fault shows that rocks there are distinct from the superficially similar rocks of the Tahuin Group to the south. Biotite from schist in the Eastern Andean Cordillera yields an Early Eocene age (56.6 ? 1.6 m.y.). Metamorphic rocks in the northern part of the Eastern Andean Cordillera are Cretaceous in age and were metamorphosed in part in early Tertiary time. They are unrelated to and were metamorphosed later than any of the diverse rocks exposed on the northern flank of the Huancabamba Deflection.

SilMush: A procedure for modeling of the geochemical evolution of silicic magmas and granitic rocks

NASA Astrophysics Data System (ADS)

Hertogen, Jan; Mareels, Joyce

2016-07-01

A boundary layer crystallization modeling program is presented that specifically addresses the chemical fractionation in silicic magma systems and the solidification of plutonic bodies. The model is a Langmuir (1989) type approach and does not invoke crystal settling in high-viscosity silicic melts. The primary aim is to model a granitic rock as a congealed crystal-liquid mush, and to integrate major element and trace element modeling. The procedure allows for some exploratory investigation of the exsolution of H2O-fluids and of the fluid/melt partitioning of trace elements. The procedure is implemented as a collection of subroutines for the MS Excel spreadsheet environment and is coded in the Visual Basic for Applications (VBA) language. To increase the flexibility of the modeling, the procedure is based on discrete numeric process simulation rather than on solution of continuous differential equations. The program is applied to a study of the geochemical variation within and among three granitic units (Senones, Natzwiller, Kagenfels) from the Variscan Northern Vosges Massif, France. The three units cover the compositional range from monzogranite, over syenogranite to alkali-feldspar granite. An extensive set of new major element and trace element data is presented. Special attention is paid to the essential role of accessory minerals in the fractionation of the Rare Earth Elements. The crystallization model is able to reproduce the essential major and trace element variation trends in the data sets of the three separate granitic plutons. The Kagenfels alkali-feldspar leucogranite couples very limited variation in major element composition to a considerable and complex variation of trace elements. The modeling results can serve as a guide for the reconstruction of the emplacement sequence of petrographically distinct units. Although the modeling procedure essentially deals with geochemical fractionation within a single pluton, the modeling results bring up a number of questions about the petrogenetic relationships among parental magmas of nearly coeval granitic units emplaced in close proximity.

On the use of copper-based substrates for YBCO coated conductors

NASA Astrophysics Data System (ADS)

Vannozzi, A.; Fabbri, F.; Augieri, A.; Angrisani Armenio, A.; Galluzzi, V.; Mancini, A.; Rizzo, F.; Rufoloni, A.; Padilla, J. A.; Xuriguera, E.; De Felicis, D.; Bemporad, E.; Celentano, G.

2014-05-01

It is well known that the recrystallization texture of heavily cold-rolled pure copper is almost completely cubic. However, one of the main drawbacks concerning the use of pure copper cube-textured substrates for YBCO coated conductor is the reduced secondary recrystallization temperature. The onset of secondary recrystallization (i.e., the occurrence of abnormal grains with unpredictable orientation) in pure copper substrate was observed within the typical temperature range required for buffer layer and YBCO processing (600-850 °C). To avoid the formation of abnormal grains the effect of both grain size adjustment (GSA) and recrystallization annealing was analyzed. The combined use of a small initial grain size and a recrystallization two-step annealing (TSA) drastically reduced the presence of abnormal grains in pure copper tapes. Another way to overcome the limitation imposed by the formation of abnormal grains is to deposit a buffer layer at temperatures where secondary recrystallization does not occur. For example, La2Zr2O7 (LZO) film with a high degree of epitaxy was grown by metal-organic decomposition (MOD) at 1000 °C on pure copper substrate. In several samples the substrate underwent secondary recrystallization. Our experiments indicate that the motion of grain boundaries occurring during secondary recrystallization process does not affect the quality of LZO film.

Effect of Sn Micro-alloying on Recrystallization Nucleation and Growth Processes of Ferritic Stainless Steels

NASA Astrophysics Data System (ADS)

He, Tong; Bai, Yang; Liu, Xiuting; Guo, Dan; Liu, Yandong

2018-04-01

We investigated the effect of Sn micro-alloying on recrystallization nucleation and growth processes of ferritic stainless steels. The as-received hot rolled sheets were cold rolled up to 80% reduction and then annealed at 740-880 °C for 5 min. The cold rolling and recrystallization microstructures and micro-textures of Sn-containing and Sn-free ferritic stainless steels were all determined by electron backscatter diffraction. Our Results show that Sn micro-alloying has important effects on recrystallization nucleation and growth processes of ferritic stainless steels. Sn micro-alloying conduces to grain fragmentation in the deformation band, more fragmented grains are existed in Sn-containing cold rolled sheets, which provides more sites for recrystallization nucleation. Sn micro-alloying also promotes recrystallization process and inhibits the growth of recrystallized grains. The recrystallization nucleation and growth mechanism of Sn-containing and Sn-free ferritic stainless steels are both characterized by orientation nucleation and selective growth, but Sn micro-alloying promotes the formation of γ-oriented grains. Furthermore, Sn micro-alloying contributes to the formation of Σ13b CSL boundaries and homogeneous γ-fiber texture. Combining the results of microstructure and micro-texture, the formability of Sn-containing ferritic stainless steels will be improved to some extent.

Composition, Age, and Origin of Cretaceous Granitic Magmatism on the Eastern Chukchi Peninsula

NASA Astrophysics Data System (ADS)

Luchitskaya, M. V.; Sokolov, S. D.; Pease, V.; Miller, E.; Belyatsky, B. V.

2018-05-01

New geochronological and isotopic geochemical data are given, which make it possible to recognize two types of granitic rocks on the eastern Chukchi Peninsula. Early Cretaceous Tkachen and Dolina granitic plutons with zircon ages (U-Pb SIMS) of 119-122 and 131-136 Ma are related to the first type. They cut through Devonian-Lower Carboniferous basement rocks and are overlain by the Aptian-Albian Etelkuyum Formation. Basal units of the latter contain fragments of granitic rocks. Late Cretaceous Provideniya and Rumilet granitic plutons, which contain zircons with ages of 94 and 85 Ma (U-Pb SIMS), respectively, belong to the second type. They cut through volcanic-sedimentary rocks of the Etelkuyum and Leurvaam formations pertaining to the Okhotsk-Chukotka Volcanic Belt. In petrographic and geochemical features, the Early Cretaceous granitic rocks of the Tkachen Pluton are commensurable with I-type granites, while Late Cretaceous granite of the Rumilet Pluton is comparable to A2-type granite. The Sr-Nd isotopic data provide evidence that from the Early Cretaceous Tkachen and Dolina plutons to the Late Cretaceous Provideniya and Rumilet plutons, the degree of crustal assimilation of suprasubduction mantle-derived melts increases up to partial melting of heterogeneous continental crust enriched in rubidium. An unconformity and various degrees of secondary alteration of volcanic-sedimentary rocks have been established in the Okhotsk-Chukotka Volcanic Belt, and this was apparently caused by transition of the tectonic setting from suprasubduction to a transform margin with local extension.

Mechanism of secondary recrystallization of Goss grains in grain-oriented electrical steel

NASA Astrophysics Data System (ADS)

Hayakawa, Yasuyuki

2017-12-01

Since its invention by Goss in 1934, grain-oriented (GO) electrical steel has been widely used as a core material in transformers. GO exhibits a grain size of over several millimeters attained by secondary recrystallization during high-temperature final batch annealing. In addition to the unusually large grain size, the crystal direction in the rolling direction is aligned with <001>, which is the easy magnetization axis of α-iron. Secondary recrystallization is the phenomenon in which a certain very small number of {110}<001> (Goss) grains grow selectively (about one in 106 primary grains) at the expense of many other primary recrystallized grains. The question of why the Goss orientation is exclusively selected during secondary recrystallization has long been a main research subject in this field. The general criterion for secondary recrystallization is a small and uniform primary grain size, which is achieved through the inhibition of normal grain growth by fine precipitates called inhibitors. This paper describes several conceivable mechanisms of secondary recrystallization of Goss grains mainly based on the selective growth model.

Mechanism of secondary recrystallization of Goss grains in grain-oriented electrical steel

PubMed Central

Hayakawa, Yasuyuki

2017-01-01

Abstract Since its invention by Goss in 1934, grain-oriented (GO) electrical steel has been widely used as a core material in transformers. GO exhibits a grain size of over several millimeters attained by secondary recrystallization during high-temperature final batch annealing. In addition to the unusually large grain size, the crystal direction in the rolling direction is aligned with <001>, which is the easy magnetization axis of α-iron. Secondary recrystallization is the phenomenon in which a certain very small number of {110}<001> (Goss) grains grow selectively (about one in 106 primary grains) at the expense of many other primary recrystallized grains. The question of why the Goss orientation is exclusively selected during secondary recrystallization has long been a main research subject in this field. The general criterion for secondary recrystallization is a small and uniform primary grain size, which is achieved through the inhibition of normal grain growth by fine precipitates called inhibitors. This paper describes several conceivable mechanisms of secondary recrystallization of Goss grains mainly based on the selective growth model. PMID:28804524

Evaluation of the recrystallization kinetics of hot-melt extruded polymeric solid dispersions using an improved Avrami equation

PubMed Central

Feng, Xin; Ye, Xingyou; Park, Jun-Bom; Lu, Wenli; Morott, Joe; Beissner, Brad; Lian, Zhuoyang John; Pinto, Elanor; Bi, Vivian; Porter, Stu; Durig, Tom; Majumdar, Soumyajit; Repka, Michael A.

2017-01-01

The recrystallization of an amorphous drug in a solid dispersion system could lead to a loss in the drug solubility and bioavailability. The primary objective of the current research was to use an improved kinetic model to evaluate the recrystallization kinetics of amorphous structures and to further understand the factors influencing the physical stability of amorphous solid dispersions. Amorphous solid dispersions of fenofibrate with different molecular weights of hydroxypropylcellulose, HPC (Klucel™ LF, EF, ELF) were prepared utilizing hot-melt extrusion technology. Differential scanning calorimetry was utilized to quantitatively analyze the extent of recrystallization in the samples stored at different temperatures and relative humidity (RH) conditions. The experimental data were fitted into the improved kinetics model of a modified Avrami equation to calculate the recrystallization rate constants. Klucel LF, the largest molecular weight among the HPCs used, demonstrated the greatest inhibition of fenofibrate recrystallization. Additionally, the recrystallization rate (k) decreased with increasing polymer content, however exponentially increased with higher temperature. Also k increased linearly rather than exponentially over the range of RH studied. PMID:25224341

Investigating the principles of recrystallization from glyceride melts.

PubMed

Windbergs, Maike; Strachan, Clare J; Kleinebudde, Peter

2009-01-01

Different lipids were melted and resolidified as model systems to gain deeper insight into the principles of recrystallization processes in lipid-based dosage forms. Solid-state characterization was performed on the samples with differential scanning calorimetry and X-ray powder diffraction. Several recrystallization processes could be identified during storage of the lipid layers. Pure triglycerides that generally crystallize to the metastable alpha-form from the melt followed by a recrystallization process to the stable beta-form with time showed a chain-length-dependent behavior during storage. With increasing chain length, the recrystallization to the stable beta-form was decelerated. Partial glycerides exhibited a more complex recrystallization behavior due to the fact that these substances are less homogenous. Mixtures of a long-chain triglyceride and a partial glyceride showed evidence of some interaction between the two components as the partial glyceride hindered the recrystallization of the triglyceride to the stable beta-form. In addition, the extent of this phenomenon depended on the amount of partial glyceride in the mixture. Based on these results, changes in solid dosage forms based on glycerides during processing and storage can be better understood.

Evaluation of the recrystallization kinetics of hot-melt extruded polymeric solid dispersions using an improved Avrami equation.

PubMed

Feng, Xin; Ye, Xingyou; Park, Jun-Bom; Lu, Wenli; Morott, Joe; Beissner, Brad; Lian, Zhuoyang John; Pinto, Elanor; Bi, Vivian; Porter, Stu; Durig, Tom; Majumdar, Soumyajit; Repka, Michael A

2015-01-01

The recrystallization of an amorphous drug in a solid dispersion system could lead to a loss in the drug solubility and bioavailability. The primary objective of the current research was to use an improved kinetic model to evaluate the recrystallization kinetics of amorphous structures and to further understand the factors influencing the physical stability of amorphous solid dispersions. Amorphous solid dispersions of fenofibrate with different molecular weights of hydroxypropylcellulose, HPC (Klucel™ LF, EF, ELF) were prepared utilizing hot-melt extrusion technology. Differential scanning calorimetry was utilized to quantitatively analyze the extent of recrystallization in the samples stored at different temperatures and relative humidity (RH) conditions. The experimental data were fitted into the improved kinetics model of a modified Avrami equation to calculate the recrystallization rate constants. Klucel LF, the largest molecular weight among the HPCs used, demonstrated the greatest inhibition of fenofibrate recrystallization. Additionally, the recrystallization rate (k) decreased with increasing polymer content, however exponentially increased with higher temperature. Also k increased linearly rather than exponentially over the range of RH studied.

Mechanism of secondary recrystallization of Goss grains in grain-oriented electrical steel.

PubMed

Hayakawa, Yasuyuki

2017-01-01

Since its invention by Goss in 1934, grain-oriented (GO) electrical steel has been widely used as a core material in transformers. GO exhibits a grain size of over several millimeters attained by secondary recrystallization during high-temperature final batch annealing. In addition to the unusually large grain size, the crystal direction in the rolling direction is aligned with <001>, which is the easy magnetization axis of α-iron. Secondary recrystallization is the phenomenon in which a certain very small number of {110}<001> (Goss) grains grow selectively (about one in 10 6 primary grains) at the expense of many other primary recrystallized grains. The question of why the Goss orientation is exclusively selected during secondary recrystallization has long been a main research subject in this field. The general criterion for secondary recrystallization is a small and uniform primary grain size, which is achieved through the inhibition of normal grain growth by fine precipitates called inhibitors. This paper describes several conceivable mechanisms of secondary recrystallization of Goss grains mainly based on the selective growth model.

Neoproterozoic A-type granitoids of the central and southern Appalachians: Intraplate magmatism associated with episodic rifting of the Rodinian supercontinent

USGS Publications Warehouse

Tollo, R.P.; Aleinikoff, J.N.; Bartholomew, M.J.; Rankin, D.W.

2004-01-01

Emplacement of compositionally distinctive granitic plutons accompanied two pulses (765-680 and 620-550Ma) of crustal extension that affected the Rodinian craton at the present location of the central Appalachians during the Neoproterozoic. The dominantly metaluminous plutons display mineralogical and geochemical characteristics of A-type granites including high FeO t/MgO ratios, high abundances of Nb, Zr, Y, Ta, and REE (except Eu), and low concentrations of Sc, Ba, Sr, and Eu. These dike-like, sheet complexes occur throughout the Blue Ridge province of Virginia and North Carolina, and were emplaced at shallow levels in continental crust during active extension, forming locally multiple-intrusive plutons elongated perpendicular to the axis of extension. New U-Pb zircon ages obtained from the Polly Wright Cove (706??4Ma) and Suck Mountain (680??4Ma) plutons indicate that metaluminous magmas continued to be replenished near the end of the first pulse of rifting. The Suck Mountain body is presently the youngest known igneous body associated with earlier rifting. U-Pb zircon ages for the Pound Ridge Granite Gneiss (562??5Ma) and Yonkers Gneiss (563??2Ma) in the Manhattan prong of southeastern New York constitute the first evidence of plutonic felsic activity associated with the later period of rifting in the U.S. Appalachians, and suggest that similar melt-generation processes were operative during both intervals of crustal extension. Fractionation processes involving primary minerals were responsible for much of the compositional variation within individual plutons. Compositions of mapped lithologic units in a subset of plutons studied in detail define overlapping data arrays, indicating that, throughout the province, similar petrologic processes operated locally on magmas that became successively more chemically evolved. Limited variation in source-sensitive Y/Nb and Yb/Ta ratios is consistent with results of melting experiments and indicates that metaluminous granitoids of the supersuite likely were derived through melting of lower crustal sources. Mildly peralkaline rocks of the Robertson River batholith and Irish Creek pluton may be derived from more chemically primitive sources similar in composition to ocean-island basalts. Blue Ridge granitoids define a plutonic episode that occurred during an unsuccessful pulse of crustal extension which predated opening of Iapetus by more than 100 million years. Granitoid gneisses in New York were emplaced during an extension-related, dominantly mafic magmatic episode that ultimately led to development of Iapetus. ?? 2003 Elsevier B.V. All rights reserved.

Stratigraphy and structure of the Strawberry Mine roof pendant, central Sierra Nevada, California

USGS Publications Warehouse

Nokleberg, W.J.

1981-01-01

The Strawberry mine roof pendant, 90 km northeast of Fresno, Calif., is composed of a sequence of metasedimentary rocks of probable Early Jurassic age and a sequence of metaigneous rocks of middle Cretaceous age. The metasedimentary rocks are a former miogeosynclinal sequence of marl and limestone now metamorphosed to calc-silicate hornfels and marble. A pelecypod found in the calc-silicate hornfels has been tentatively identified as a Mesozoic bivalve, possibly Inoceramus pseudomytiloides of Early Jurassic age. These metasedimentary rocks are similar in lithology, structure, and gross age to the metasedimentary rocks of the Boyden Cave roof pendant and are assigned to the Lower Jurassic Kings sequence. The younger metaigneous rocks are metamorphosed shallow-in trusi ve rocks that range in composi tion from granodiorite to rhyolite. These rocks are similar in composition and age to the metavolcanic rocks of the surrounding Merced Peak quadrangle and nearby Ritter Range, and probably represent necks or dikes that were one source for the meta volcanic rocks. The roof pendant is intruded by several plutons, ranging in composition from dioritic to highly felsic, that constitute part of the granodiorite of Jackass Lakes, also M middle Cretaceous age. The contemporaneous suites of metaigneous, metavolcanic, and plutonic rocks in the region represent a middle Cretaceous period of calc-alkalic volcanism and plutonism in the central Sierra Nevada and are interpreted as part of an Andean-type volcanic-plutonic arc. Three deformations are documented in the roof pendant. The first deformation is reflected only in the metasedimentary rocks and consists of northeast-to east-west-trending folds. Similar structures occur in the Boyden Cave roof pendant and in the Calaveras Formation and represent a Middle Jurassic regional deformation. Evidence of the second deformation occurs in the metasedimentary and metaigneous rocks and consists of folds, faults, minor structures, and regional metamorphism along N. 25? W. trends. Crosscutting of these structures by the contemporaneous granodiorite of Jackass Lakes indicates that this deformation occurred simultaneously with volcanism and plutonism during the middle Cretaceous. The third deformation involved both the roof pendant and adjacent plutonic rocks and consists of folds, faults, schistosities, and regional metamorphism along N. 65? -900 W. trends. Crosscutting of similar structures in other middle Cretaceous plutonic rocks of the Merced Peak quadrangle by undeformed late Cretaceous plutonic rocks indicates a regional deformation of middle to late Cretaceous age. Structures of similar style, orientation, and age occur elsewhere in metavolcanic and plutonic rocks throughout the central Sierra Nevada.

Petrochemical evolution of the White Mfolozi Granite pluton: Evidence for a late Palaeoarchaean A-type granite from the SE Kaapvaal Craton, South Africa

NASA Astrophysics Data System (ADS)

Misra, Saumitra; Reinhardt, Jürgen; Wilson, Allan H.

2017-08-01

One of the major limitations in understanding the geochemical evolution of the Kaapvaal Craton, South Africa, is the scarcity of whole rock trace element data of the granitoid and other rocks compared to the vastness of this cratonic block. Here we present new XRF major oxide and ICP-MS trace element analyses of the White Mfolozi Granitoid (WMG) pluton, SE Kaapvaal Craton, which suggest that the 3.25 Ga (U-Pb zircon age) old WMG pluton is a peraluminous A-type granite and could be equivalent to the intrusive potassic granite phase of the Anhalt Granitoid suite, occurring to the North of the WMG pluton. The pluton was generated by batch partial melting of a pre-existing TTG source in two major phases under relatively anhydrous conditions, and the heat of partial melting could have been provided by a voluminous mantle-derived mafic magma, which intruded into mid-crustal levels (c. 17 km), perhaps during a period of crustal extension. The estimated pressure and temperature of generation of the WMG parent magma with average molar [or/(or + ab)] 0.48 could be 500 MPa and close to 1000 °C, respectively, when compared with the results of experimental petrology. Interstitial occurrence of relatively iron-rich biotite [Mg/(Mg + Fe) 0.41-0.45] suggests that the final temperature of crystallization of the pluton was close to 800 °C. An important magmatic event following the main phase of partial melting was limited mixing between the intrusive mafic magma and co-existing newly generated granitic melt. This magma mixing resulted in distinct variations in SiO2 and a low initial Sr isotopic ratio (0.7013) of the WMG pluton. Although both the models of partial melting of quartzo-feldspathic sources and fractional crystallization of basaltic magmas with or without crustal assimilation have been proposed for the origin of A-type granites, the model of magmatic evolution of the WMG pluton presented here can also be an alternative model for the generation of A-type granites. In this model, post-partial melting magma mixing is perhaps critical in explaining the Daly gap in composition and extreme variations in chemical (e.g., SiO2) and isotopic compositions observed in many bimodal A-type granite suites. The emplacement of the oldest known A-type granitoid suite in the Kaapvaal Craton, the WMG pluton, marks a period of stabilization of the craton before erosion and deposition of the overlying volcano-sedimentary succession of the Pongola Supergroup.

The link between volcanism and plutonism in epizonal magma systems; high-precision U–Pb zircon geochronology from the Organ Mountains caldera and batholith, New Mexico

USGS Publications Warehouse

Rioux, Matthew; Farmer, Lang; Bowring, Samuel; Wooton, Kathleen M.; Amato, Jeffrey M.; Coleman, Drew S.; Verplanck, Philip L.

2016-01-01

The Organ Mountains caldera and batholith expose the volcanic and epizonal plutonic record of an Eocene caldera complex. The caldera and batholith are well exposed, and extensive previous mapping and geochemical analyses have suggested a clear link between the volcanic and plutonic sections, making this an ideal location to study magmatic processes associated with caldera volcanism. Here we present high-precision thermal ionization mass spectrometry U–Pb zircon dates from throughout the caldera and batholith, and use these dates to test and improve existing petrogenetic models. The new dates indicate that Eocene volcanic and plutonic rocks in the Organ Mountains formed from ~44 to 34 Ma. The three largest caldera-related tuff units yielded weighted mean 206Pb/238U dates of 36.441 ± 0.020 Ma (Cueva Tuff), 36.259 ± 0.016 Ma (Achenback Park tuff), and 36.215 ± 0.016 Ma (Squaw Mountain tuff). An alkali feldspar granite, which is chemically similar to the erupted tuffs, yielded a synchronous weighted mean 206Pb/238U date of 36.259 ± 0.021 Ma. Weighted mean 206Pb/238U dates from the larger volume syenitic phase of the underlying Organ Needle pluton range from 36.130 ± 0.031 to 36.071 ± 0.012 Ma, and the youngest sample is 144 ± 20 to 188 ± 20 ka younger than the Squaw Mountain and Achenback Park tuffs, respectively. Younger plutonism in the batholith continued through at least 34.051 ± 0.029 Ma. We propose that the Achenback Park tuff, Squaw Mountain tuff, alkali feldspar granite and Organ Needle pluton formed from a single, long-lived magma chamber/mush zone. Early silicic magmas generated by partial melting of the lower crust rose to form an epizonal magma chamber. Underplating of the resulting mush zone led to partial melting and generation of a high-silica alkali feldspar granite cap, which erupted to form the tuffs. The deeper parts of the chamber underwent continued recharge and crystallization for 144 ± 20 ka after the final eruption. Calculated magmatic fluxes for the Organ Needle pluton range from 0.0006 to 0.0030 km3/year, in agreement with estimates from other well-studied plutons. The petrogenetic evolution proposed here may be common to many small-volume silicic volcanic systems.

Pre-Alpine evolution of the Seckau Complex (Austroalpine basement/Eastern Alps): Constraints from in-situ LA-ICP-MS Usbnd Pb zircon geochronology

NASA Astrophysics Data System (ADS)

Mandl, Magdalena; Kurz, Walter; Hauzenberger, Christoph; Fritz, Harald; Klötzli, Urs; Schuster, Ralf

2018-01-01

The Variscan European Belt is a complex orogen with its southern margin partly obscured by Alpine tectonics and metamorphism. We present a study of one of the units, the Seckau Complex, that constitute the southern part of the Variscan European Belt in the Eastern Alps in order to clarify its origin, age and lithostratigraphy. The magmatic and geochronological evolution of this Complex in the northwestern part of the Seckau Nappe (as part of the Austroalpine Silvretta-Seckau Nappe System) was investigated by zircon Usbnd Pb dating of paragneisses and metagranitoids coupled with petrological and geochemical data. This reveals the distinction of three newly defined lithostratigraphic/lithodemic sub-units: (1) Glaneck Metamorphic Suite, (2) Hochreichart Plutonic Suite and (3) Hintertal Plutonic Suite. The Glaneck Metamorphic Suite is mainly composed of fine-grained paragneisses that yield Usbnd Pb zircon ages in the range between 2.7 Ga and 2.0 Ga, as well as concordia ages from 572 ± 7 Ma to 559 ± 11 Ma. All of these ages are interpreted as detrital zircon ages originating from an igneous source. The paragneisses are the host rock for the large volumes of metagranitoids of the Hochreichart Plutonic Suite and the Hintertal Plutonic Suite. The Hochreichart Plutonic Suite comprises highly fractionated melts with mainly S-type characteristics and late Cambrian to Early Ordovician Usbnd Pb zircon ages (508 ± 9 Ma to 486 ± 9 Ma), interpreted as magmatic protolith ages. The Hintertal Plutonic Suite is composed of metagranitoids with Late Devonian to early Carboniferous (365 ± 11 Ma and 331 ± 10 Ma) protolith ages, that intruded during an early phase of the Variscan tectonometamorphic event. The metagranitoids of the Hintertal Plutonic Suites define a magmatic fractionation trend, seen in variable Rb/Sr ratios. On this base they can be further subdivided into (a) the Griessstein Pluton characterized by S-type metagranitoids and (b) the Pletzen Pluton distinguished by intermediate to acidic metagranitoids with I-type affinity. The detrital zircon age spectra suggest a Neoproterozoic ancestry of the Glaneck Metamorphic Suite, which was located west of the Arabian Nubian Shield, probably next to the Trans-Saharan Belt. The early Paleozoic evolution of the recent Seckau Complex shows similarities to basement units of the Southalpine Unit, parts of the Austroalpine Unit and the Tatric and Veporic units of the Central Western Carpathians.

Controls on intrusion of near-trench magmas of the Sanak-Baranof Belt, Alaska, during Paleogene ridge subduction, and consequences for forearc evolution

USGS Publications Warehouse

Kusky, Timothy M.; Bradley, Dwight C.; Donely, D. Thomas; Rowley, David; Haeussler, Peter J.

2003-01-01

A belt of Paleogene near-trench plutons known as the Sanak-Baranof belt intruded the southern Alaska convergent margin. A compilation of isotopic ages of these plutons shows that they range in age from 61 Ma in the west to ca. 50 Ma in the east. This migrating pulse of magmatism along the continental margin is consistent with North Pacific plate reconstructions that suggests the plutons were generated by migration of a trench-ridge-trench triple junction along the margin. On the Kenai Peninsula the regional lower greenschist metamorphic grade of the turbiditic host rocks, texture of the plutons, contact-metamorphic assemblage, and isotopic and fluid inclusion studies suggest that the plutons were emplaced at pressures of 1.5–3.0 kbars (5.2–10.5 km) into a part of the accretionary wedge with an ambient temperature of 210–300 °C. The presence of kyanite, garnet, and cordierite megacrysts in the plutons indicates that the melts were generated at a depth greater than 20 km and minimum temperature of 650 °C. These megacrysts are probably xenocrystic remnants of a restitic or contact metamorphic phase entrained by the melt during intrusion. However, it is also possible that they are primary magmatic phases crystallized from the peraluminous melt.Plutons of the Sanak-Baranof belt serve as time and strain markers separating kinematic regimes that predate and postdate ridge subduction. Pre-ridge subduction structures are interpreted to be related to the interaction between the leading oceanic plate and the Chugach terrane. These include regional thrust faults, NE-striking map-scale folds with associated axial planar foliation, type-1 mélanges, and an arrayof faults within the contact aureole indicating shortening largely accommodated by layer-parallel extension. Syn-ridge subduction features include the plutons, dikes, and ductile shear zones within contact aureoles with syn-kinematic metamorphic mineral growth and foliation development. Many of the studied plutons have sheeted margins and appear to have intruded along extensional jogs in margin-parallel strike-slip faults, whereas others form significant angles with the main faults and may have been influenced by minor faults of other orientations. Some of the plutons of the Sanak-Baranof belt have their long axes oriented parallel to faults of an orthorhombic fault set, implying that these faults may have provided a conduit for magma emplacement. This orthorhombic set of late faults is interpreted to have initially formed during the ridge subduction event, and continued to be active for a short time after passage of the triple junction. ENE-striking dextral faults of this orthorhombic fault system exhibit mutually crosscutting relationships with Eocene dikes related to ridge subduction, and mineralized strike-slip and normal faults of this system have yielded 40Ar/39Ar ages identical to near-trench intrusives related to ridge subduction. Movement on the orthorhombic fault system accommodated exhumation of deeper levels of the southern Alaska accretionary wedge, which is interpreted as a critical taper adjustment to subduction of younger oceanic lithosphere during ridge subduction. These faults therefore accommodate both deformation of the wedge and assisted emplacement of near-trench plutons. Structures that crosscut the plutons and aureoles include the orthorhombic fault set and dextral strike-slip faults, reflecting a new kinematic regime established after ridge subduction, during underthrusting of the trailing oceanic plate with new dextral-oblique convergence vectors with the overriding plate. The observation that the orthorhombic fault set both cuts and is cut by Eocene intrusives demonstrates the importance of these faults for magma emplacement in the forearc.A younger, ca. 35 Ma suite of plutons intrudes the Chugach terrane in the Prince William Sound region, and their intrusion geometry was strongly influenced by pre-existing faults developed during ridge subduction. The generation of these plutons may be related to the sudden northward migration of the triple junction at ca. 40–33 Ma, as the ridge was being subducted nearly parallel to the trench during this interval. These younger plutons are used to provide additional constraints on the structural evolution of the wedge. Late- to post-ridge subduction fabrics include a pressure solution cleavage and additional movement on the orthorhombic fault system. After triple junction migration, subduction of the trailing oceanic plate involved a significant component of dextral transpression and northward translation of the Chugach terrane. This change in kinematics is recorded by very late gouge-filled dextral faults in the late structures of the accretionary prism.

Hot Deformation and Dynamic Recrystallization Behavior of the Cu-Cr-Zr-Y Alloy

NASA Astrophysics Data System (ADS)

Zhang, Yi; Huili, Sun; Volinsky, Alex A.; Tian, Baohong; Chai, Zhe; Liu, Ping; Liu, Yong

2016-03-01

To study the workability and to optimize the hot deformation processing parameters of the Cu-Cr-Zr-Y alloy, the strain hardening effect and dynamic softening behavior of the Cu-Cr-Zr-Y alloy were investigated. The flow stress increases with the strain rate and stress decreases with deformation temperature. The critical conditions, including the critical strain and stress for the occurrence of dynamic recrystallization, were determined based on the alloy strain hardening rate. The critical stress related to the onset of dynamic recrystallization decreases with temperature. The evolution of DRX microstructure strongly depends on the deformation temperature and the strain rate. Dynamic recrystallization appears at high temperatures and low strain rates. The addition of Y can refine the grain and effectively accelerate dynamic recrystallization. Dislocation generation and multiplication are the main hot deformation mechanisms for the alloy. The deformation temperature increase and the strain rate decrease can promote dynamic recrystallization of the alloy.

Effect of controlling recrystallization from the melt on the residual stress and structural properties of the Silica-clad Ge core fiber

NASA Astrophysics Data System (ADS)

Zhao, Ziwen; Cheng, Xueli; He, Ting; Xue, Fei; Zhang, Wei; Chen, Na; Wen, Jianxiang; Zeng, Xianglong; Wang, Tingyun

2017-09-01

Effect of controlling recrystallization from the melt (1000 °C) on the residual stress and structural properties of a Ge core fiber via molten core drawing (MCD) method is investigated. Ge core fibers is investigated using Raman spectroscopy, scanning electron microscope (SEM), and X-ray diffraction (XRD). Compared with the as-drawn Ge fiber, the Raman peak of the recrystallized Ge fiber shift from 300 cm-1 to 300.6 cm-1 and full width at half maximum (FWHM) decreased from 5.36 cm-1 to 4.48 cm-1. The Ge crystal grains which sizes are of 200-600 nm were formed during the process of recrystallization; the XRD peak of (1 1 1) plane is observed after recrystallization. These results show that controlling recrystallization allows the release of the thermal stress, and improvement of the crystal quality of Ge core.

Microstructure heterogeneity after the ECAP process and its influence on recrystallization in aluminium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wronski, S., E-mail: wronski@fis.agh.edu.pl; Tarasiuk, J., E-mail: tarasiuk@ftj.agh.edu.pl; Bacroix, B., E-mail: brigitte.bacroix@univ-paris13.fr

The main purpose of the present work is to describe the qualitative and quantitative behaviours of aluminium during high strain plastic deformation and the effect of deformation on the subsequent recrystallization process. An Electron Backscatter Diffraction analysis of aluminium after the Equal channel angular pressing (ECAP) and recrystallization process is presented. In order to do this, several topological maps are measured for samples processed by 4 and 8 passes and recrystallized. The processing was conducted with route C. For all samples, distributions of grain size, misorientation, image quality factor (IQ) and texture were preceded and then analysed in some detail.more » - Highlights: ► Describe the microstructure fragmentation in aluminum. ► High strain plastic deformation and effect of deformation on recrystallization. ► The microstructure fragmentation and its influence on recrystallization. ► Image quality factor and misorientation characteristics are examined using EBSD.« less

Mineral Resources Survey, Seven Additional Valleys, Nevada/Utah Siting Area. Volume III.

DTIC Science & Technology

1981-06-23

intermittent plaoc C-Goldt X5 0 o AuR( vr 27 ~ O , O future reserves: > S)701 ’C-Gold Hill Fm 11.~.Acieeplrto K-Gmanittic Pluton X PS X > 2,000,000 No Atv...molybdenum in granitic plutons and for > l5,000(Hg) precious metals Active exploration in the western part of the PR 3,800,000(Recorded) No district...and Weepah plutons . intrisive rhyol ites flank the district W L >220,000 No Active exploration Placer, Active exploration for large tonnage, lowWL X

Strain induced grain boundary migration effects on grain growth of an austenitic stainless steel during static and metadynamic recrystallization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paggi, A., E-mail: alpaggi@tenaris.com; Angella, G.; Donnini, R.

Static and metadynamic recrystallization of an AISI 304L austenitic stainless steel was investigated at 1100 °C and 10{sup −} {sup 2} s{sup −} {sup 1} strain rate. The kinetics of recrystallization was determined through double hit compression tests. Two strain levels were selected for the first compression hit: ε{sub f} = 0.15 for static recrystallization (SRX) and 0.25 for metadynamic recrystallization (MDRX). Both the as-deformed and the recrystallized microstructures were investigated through optical microscopy and electron back-scattered diffraction (EBSD) technique. During deformation, strain induced grain boundary migration appeared to be significant, producing a square-like grain boundary structure aligned along themore » directions of the maximum shear stresses in compression. EBSD analysis revealed to be as a fundamental technique that the dislocation density was distributed heterogeneously in the deformed grains. Grain growth driven by surface energy reduction was also investigated, finding that it was too slow to explain the experimental data. Based on microstructural results, it was concluded that saturation of the nucleation sites occurred in the first stages of recrystallization, while grain growth driven by strain induced grain boundary migration (SIGBM) dominated the subsequent stages. - Highlights: • Recrystallization behavior of a stainless steel was investigated at 1100 °C. • EBSD revealed that the dislocation density distribution was heterogeneous during deformation. • Saturation of nucleation sites occurred in the first stages of recrystallization. • Strain induced grain boundary migration (SIGBM) effects were significant. • Grain growth driven by SIGBM dominated the subsequent stages.« less

Titanium concentration in quartz as a record of multiple deformation mechanisms in an extensional shear zone

NASA Astrophysics Data System (ADS)

Nachlas, William O.; Whitney, Donna L.; Teyssier, Christian; Bagley, Brian; Mulch, Andreas

2014-04-01

Results of high precision analysis of Ti concentration ([Ti]) in quartz representing different recrystallization microstructures in a suite of progressively deformed quartzite mylonites show the effect of recrystallization on distribution of Ti in quartz. Petrographic observations and ion microprobe analysis reveals three texturally and geochemically distinct quartz microstructures in mylonites: (1) cores of recrystallized quartz ribbons preserve the highest [Ti] and are interpreted to have recrystallized via grain boundary migration recrystallization, (2) recrystallized rims and grain margins preserve a lower and more variable [Ti] and are interpreted to reflect the combined influence of subgrain rotation and bulging recrystallization, and (3) neocrystallized quartz precipitated in dilatancy sites has low (˜1 ppm) [Ti], reflecting the Ti content of the syndeformational fluid. Muscovite in nonmylonitic quartzite (at the base of the sampling traverse) is compositionally zoned, whereas muscovite in mylonitic quartzite shows a progressive decreasing in zoning in higher strain samples. Three-dimensional phase distribution mapping using X-ray computed tomography analysis of rock hand samples reveals that Ti-bearing accessory phases are less abundant and more dispersed in higher strained mylonites compared to nonmylonitic quartzite. This study demonstrates the influence of dynamic recrystallization on Ti substitution in quartz and evaluates the Ti buffering capacity of aqueous fluids (meteoric versus metamorphic/magmatic) as well as the distribution and reactivity of Ti-bearing accessory phases in a deforming quartzite. Results of this study suggest that Ti-in-quartz thermobarometry of deformed quartz is a sensitive technique for resolving the multistage history of quartz deformation and recrystallization in crustal shear zones.

Synthesis of petrographic, geochemical, and isotopic data for the Boulder batholith, southwest Montana

USGS Publications Warehouse

du Bray, Edward A.; Aleinikoff, John N.; Lund, Karen

2012-01-01

The Late Cretaceous Boulder batholith in southwest Montana consists of the Butte Granite and a group of associated smaller intrusions emplaced into Mesoproterozoic to Mesozoic sedimentary rocks and into the Late Cretaceous Elkhorn Mountains Volcanics. The Boulder batholith is dominated by the voluminous Butte Granite, which is surrounded by as many as a dozen individually named, peripheral intrusions. These granodiorite, monzogranite, and minor syenogranite intrusions contain varying abundances of plagioclase, alkali feldspar, quartz, biotite, hornblende, rare clinopyroxene, and opaque oxide minerals. Mafic, intermediate, and felsic subsets of the Boulder batholith intrusions are defined principally on the basis of color index. Most Boulder batholith plutons have inequigranular to seriate textures although several are porphyritic and some are granophyric (and locally miarolitic). Most of these plutons are medium grained but several of the more felsic and granophyric intrusions are fine grained. Petrographic characteristics, especially relative abundances of constituent minerals, are distinctive and foster reasonably unambiguous identification of individual intrusions. Seventeen samples from plutons of the Boulder batholith were dated by SHRIMP (Sensitive High Resolution Ion Microprobe) zircon U-Pb geochronology. Three samples of the Butte Granite show that this large pluton may be composite, having formed during two episodes of magmatism at about 76.7 ± 0.5 Ma (2 samples) and 74.7 ± 0.6 million years ago (Ma) (1 sample). However, petrographic and chemical data are inconsistent with the Butte Granite consisting of separate, compositionally distinct intrusions. Accordingly, solidification of magma represented by the Butte Granite appears to have spanned about 2 million year (m.y.). The remaining Boulder batholith plutons were emplaced during a 6-10 m.y. span (81.7 ± 1.4 Ma to 73.7 ± 0.6 Ma). The compositional characteristics of these plutons are similar to those of moderately differentiated subduction-related magmas. The plutons form relatively coherent, distinct but broadly overlapping major oxide composition clusters or linear arrays on geochemical variation diagrams. Rock compositions are subalkaline, magnesian, calc-alkalic to calcic, and metaluminous to weakly peraluminous. The Butte Granite intrusion is homogeneous with respect to major oxide abundances. Each of the plutons is also characterized by distinct trace element abundances although absolute trace element abundance variations are relatively minor. Limited Sr and Nd isotope data for whole-rock samples of the Boulder batholith are more radiogenic than those for plutonic rocks of western Idaho, eastern Oregon, the Salmon River suture, and most of the Big Belt Mountains. Initial strontium (Sri) values are low and epsilon neodymium (εNd) values are comparable relative to those of other southwest Montana basement and Mesozoic intrusive rocks. Importantly, although the Boulder batholith hosts significant mineral deposits, including the world-class Butte Cu-Ag deposit, ore metal abundances in the Butte Granite, as well as in its peripheral plutons, are not elevated but are comparable to global average abundances in igneous rocks.

Investigation of the mineral potential of the Clipper Gap, Lone Mountain-Weepah, and Pipe Spring plutons, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tingley, J.V.; Maldonado, F.

1983-09-15

The Clipper Gap pluton, composed mostly of quartz monzonite with minor granite, granodiorite, and crosscutting alaskite dikes, intrudes Paleozoic western facies strata. A narrow zone of contact metamorphism is present at the intrusive-sediment contact. No mineral production has been recorded from Clipper Gap, but quartz veins containing gold-silver-copper mineral occurrences have been prospected there from the late 1800's to the present. Areas of the Lone Mountain-Weepah plutons that were studied are located in Esmeralda County about 14 km west of Tonopah, Nevada. At Lone Mountain, a Cretaceous intrusive cuts folded Precambrian and Cambrian sediments. Lead-zinc ores have been mined frommore » small replacement ore bodies in the Alpine district, west of Lone Mountain. Copper and molybdenum occurrences have been found along the east flank of Lone Mountain, and altered areas were noted in intrusive outcrops around the south end of Lone Mountain. Mineral occurrences are widespread and varied with mining activity dating back to the 1860's. The Pipe Spring pluton study area is flanked by two important mining districts, Manhattan to the north and Belmont to the northeast. Mining activity at Belmont dates from 1865. Activity at Manhattan was mainly between 1907 and 1947, but the district is active at the present time (1979). Four smaller mining areas, Monarch, Spanish Springs, Baxter Spring, and Willow Springs, are within the general boundary of the area. The Pipe Spring pluton study area contains numerous prospects along the northern contact zone of the pluton. Tungsten-bearing veins occur within the pluton near Spanish Springs, with potential for gold-tungsten placer in the Ralston Valley. Nickel and associated metals occur at Willow Spring and Monarch Ranch, where prospects may be associated with the margin of the Big Ten Peak Caldera.« less

Dynamic recrystallization in friction surfaced austenitic stainless steel coatings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Puli, Ramesh, E-mail: rameshpuli2000@gmail.com; Janaki Ram, G.D.

2012-12-15

Friction surfacing involves complex thermo-mechanical phenomena. In this study, the nature of dynamic recrystallization in friction surfaced austenitic stainless steel AISI 316L coatings was investigated using electron backscattered diffraction and transmission electron microscopy. The results show that the alloy 316L undergoes discontinuous dynamic recrystallization under conditions of moderate Zener-Hollomon parameter during friction surfacing. - Highlights: Black-Right-Pointing-Pointer Dynamic recrystallization in alloy 316L friction surfaced coatings is examined. Black-Right-Pointing-Pointer Friction surfacing leads to discontinuous dynamic recrystallization in alloy 316L. Black-Right-Pointing-Pointer Strain rates in friction surfacing exceed 400 s{sup -1}. Black-Right-Pointing-Pointer Estimated grain size matches well with experimental observations in 316L coatings.

Gelatinization and freeze-concentration effects on recrystallization in corn and potato starch gels.

PubMed

Ronda, Felicidad; Roos, Yrjö H

2008-04-07

Freeze-concentration of starch gels was controlled by temperature and gelatinization with glucose and lactose. The aim of the study was to evaluate the effects of freezing temperature and gel composition on starch recrystallization behaviour of corn and potato starch gels (water content 70%, w/w) in water or glucose or lactose (10%, w/w) solutions. Starch gels were obtained by heating in differential scanning calorimetry (DSC). Samples of starch gels were frozen at -10 degrees C, -20 degrees C and -30 degrees C for 24h and, after thawing, stored at +2 degrees C for 0, 1, 2, 4 and 8 days. The extent of starch recrystallization was taken from the enthalpy of melting of the recrystallized starch by DSC. Freezing temperatures, glucose, lactose and the origin of the starch affected the recrystallization behaviour greatly. The recrystallization of amorphous starch during storage was enhanced by freeze-concentration of gels at temperatures above T'(m). Molecular mobility was enhanced by unfrozen water and consequently molecular rearrangements for nucleation could take place. Further storage at a higher temperature enhanced the growth and the maturation of crystals. In particular, glucose decreased the T'(m) of the gels and consequently lower freezing temperatures were needed to reduce enhanced recrystallization during storage. Freeze-concentration temperatures also showed a significant effect on the size and the perfection of crystals formed in starch recrystallization.

Local equilibrium of mafic enclaves and granitoids of the Turtle pluton, southeast California: Mineral, chemical, and isotopic evidence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, C.M.

Major element and trace element compositions of whole rocks, mineral compositions, and Rb-Sr isotopic compositions of enclave and host granitoid pairs from the Early Cretaceous, calc-alkaline Turtle pluton of southeastern California suggest that the local environmental profoundly affects some enclave types. In the Turtle pluton, where the source of fine-grained, mafic enclaves can be deduced to be magmatic by the presence of partially disaggregated basaltic dikes, mineral chemistry suggests partial or complete local equilibrium among mineral species in the enclave and its host granitoid. Because of local Rb-Sr isotopic equilibration between fine-grained enclaves and host granitoid, one cannot use Srmore » isotopes to distinguish an enclave source independent of its host rocks from an enclave source related to the enclosing pluton. However, preliminary Nd isotopic data suggest an independent, mantle source for enclaves.« less

Timing of ore-related magmatism in the western Alaska Range, southwestern Alaska

USGS Publications Warehouse

Taylor, Ryan D.; Graham, Garth E.; Anderson, Eric D.; Selby, David

2014-01-01

This report presents isotopic age data from mineralized granitic plutons in an area of the Alaska Range located approximately 200 kilometers to the west-northwest of Anchorage in southwestern Alaska. Uranium-lead isotopic data and trace element concentrations of zircons were determined for 12 samples encompassing eight plutonic bodies ranging in age from approximately 76 to 57.4 millions of years ago (Ma). Additionally, a rhenium-osmium age of molybdenite from the Miss Molly molybdenum occurrence is reported (approx. 59 Ma). All of the granitic plutons in this study host gold-, copper-, and (or) molybdenum-rich prospects. These new ages modify previous interpretations regarding the age of magmatic activity and mineralization within the study area. The new ages show that the majority of the gold-quartz vein-hosting plutons examined in this study formed in the Late Cretaceous. Further work is necessary to establish the ages of ore-mineral deposition in these deposits.

Compositional Evolution of Pyrochlore-Group Minerals in Carbonatites of the Belaya Zima Pluton, Eastern Sayan

NASA Astrophysics Data System (ADS)

Khromova, E. A.; Doroshkevich, A. G.; Sharygin, V. V.; Izbrodin, L. A.

2017-12-01

Pyrochlore-group minerals are the main concentrators of niobium in carbonatites of the Belaya Zima alkaline pluton. Fluorcalciopyrochlore, kenopyrochlore and hydropyrochlore were identified in chemical composition. Their main characteristics are given: compositional variation, morphology, and zoning. During evolution from early calcite to late ankerite carbonatites, the UO2, TiO2, REE, and Y contents gradually increased. All carbonatite types are suggested to contain initial fluorcalciopyrochlore. However, in calcite-dolomite and ankerite carbonatites, it is partially or completely hydrated due to hydrothermal processes at the late stage of the pluton. This hydration resulted in the appearance of kenopyrochlore and hydropyrochlore due to removal of Ca, Na and F, and input of Ba, H2O, K, Si, Fe, and probably U and REE. At the last stage of the pluton, this hydrated pyrochlore was replaced by Fe-bearing columbite.

Alteration and mineralization in the eastern part of the Soldier Mountains, Camas County, Idaho

USGS Publications Warehouse

Lewis, Reed S.

2001-01-01

The eastern part of the Soldier Mountains in Camas County, south-central Idaho, is underlain principally by plutonic rocks of Cretaceous and Eocene age that locally have undergone propylitic, potassic, and muscovite-quartz alteration. Muscovite- quartz alteration is Cretaceous in age and is localized along joints and fractures, some of which are filled with quartz. Associated veins have yielded minor amounts of gold. Potassic alteration is probably both Cretaceous and Eocene in age but is weakly developed and limited in extent. Propylitic alteration is Eocene in age and is pronounced around biotite granite plutons. Despite a clear association between plutons of biotite granite and widespread propylitic alteration, mineralization associated with these rocks was minimal. Mineralized areas within more mafic Eocene plutons are characterized by veins and (or) stockworks(?) enriched in copper, molybdenum, and silver, but these areas are restricted in size and have not been productive.

Ultrasonic Determination Of Recrystallization

NASA Technical Reports Server (NTRS)

Generazio, Edward R.

1988-01-01

State of recrystallization identified. Measurement of ultrasonic attenuation shows promise as means of detecting recrystallization in metal. Technique applicable to real-time acoustic monitoring of thermomechanical treatments. Starting with work-hardened material, one ultrasonically determines effect of annealing, using correlation between ultrasonic attenuation and temperature.

A texture-component Avrami model for predicting recrystallization textures, kinetics and grain size

NASA Astrophysics Data System (ADS)

Raabe, Dierk

2007-03-01

The study presents an analytical model for predicting crystallographic textures and the final grain size during primary static recrystallization of metals using texture components. The kinetics is formulated as a matrix variant of the Johnson-Mehl-Avrami-Kolmogorov equation. The matrix form is required since the kinetic and crystallographic evolution of the microstructure is described in terms of a limited set of growing (recrystallizing) and swept (deformed) texture components. The number of components required (5-10) defines the order of the matrix since the kinetic coupling occurs between all recrystallizing and all deformed components. Each such couple is characterized by corresponding values for the nucleation energy and grain boundary mobility. The values of these parameters can be obtained by analytical or numerical coarse graining according to a renormalization scheme which replaces many individual grains which grow via recrystallization in a deformed texture component by a single equivalent recrystallization texture component or by fitting to experimental data. Each deformed component is further characterized by an average stored deformation energy. Each element of the kinetic matrix, reflecting one of the possible couplings between a deformed and a recrystallizing texture component, is then derived in each time step by a set of two differential equations. The first equation describes the thermally activated nucleation and growth processes for the expanded (free) volume for a particular couple of a deformed and a recrystallizing texture component and the second equation is used for calculating the constrained (real) volume for that couple which corrects the free volume for those portions of the deformation component which were already swept. The new method is particularly developed for the fast and physically based process simulation of recrystallization textures with respect to processing. The present paper introduces the method and applies it to the primary recrystallization of low carbon steels.

Petrology and geochronology of metamorphosed volcanic rocks and a middle Cretaceous volcanic neck in the east-central Sierra Nevada, California.

USGS Publications Warehouse

Kistler, R.W.; Swanson, S.E.

1981-01-01

Metamorphosed Mesozoic volcanic rocks from the E-central Sierra Nevada range in composition from basalt to rhyolite and have ages, based on whole rock Rb-Sr and U-Pb zircon dating, of about 237- 224, 185, 163, 134, and 100Ma. The major plutons of the batholith in this area are of Triassic (215-200Ma) and Cretaceous (94-80Ma) ages. Initial 87Sr/86Sr values for the metamorphosed volcanic rocks of the area are in the range from 0.7042 to 0.7058 and are generally different from the values for the surrounding batholithic rocks (0.7056-0.7066). A circular, zoned granitic pluton, with an outcrop area of 2.5km2, similar in appearance to a ring dike complex, was apparently a conduit for some or possibly all of the middle-Cretaceous metamorphosed volcanic rocks exposed about 5km to the S in the western part of the Ritter Range. Samples from the metamorphosed volcanic rocks and the pluton yield a Rb/Sr whole rock isochron age of 99.9+ or -2.2Ma with an intitial 87Sr/86Sr of 0.7048+ or -0.00001. Major element variation diagrams of the pluton and volcanic rocks define coincident compositional trends. The ages of volcanic events relative to the ages of the major intrusive epochs and the major element and isotopic compositions of the volcanic rocks relative to the major plutons indicate that the volcanic rocks are not simply or directly related to the major plutons in the Sierra Nevada. -from Authors

Subsurface profiling of granite pluton using microtremor method: southern Aravalli, Gujarat, India

NASA Astrophysics Data System (ADS)

Joshi, Aditya U.; Sant, Dhananjay A.; Parvez, Imtiyaz A.; Rangarajan, Govindan; Limaye, Manoj A.; Mukherjee, Soumyajit; Charola, Mitesh J.; Bhatt, Meghnath N.; Mistry, Sagar P.

2018-01-01

We report, using the microtremor method, a subsurface granitic pluton underneath the Narukot Dome and in its western extension along a WNW profile, in proximity of eastern fringe of Cambay Rift, India. The dome and its extension is a part of the Champaner Group of rocks belonging to the Mesoproterozoic Aravalli Supergroup. The present finding elucidates development of an asymmetric double plunge along Narukot Dome. Microtremor measurements at 32 sites were carried out along the axial trace (N95°) of the dome. Fourier amplitude spectral studies were applied to obtain the ratio between the horizontal and vertical components of persisting Rayleigh waves as local ambient noise. Fundamental resonant frequencies with amplitude ≥1-sigma for each site are considered to distinguish rheological boundary. Two distinct rheological boundaries are identified based on frequency ranges determined in the terrain: (1) 0.2219-10.364 Hz recorded at 31 stations identified as the Champaner metasediment and granite boundary, and (2) 10.902-27.1119 Hz recorded at 22 stations identified as the phyllite and quartzite boundary. The proposed equation describing frequency-depth relationship between granite and overlaying regolith matches with those already published in the literature. The morphology of granite pluton highlights the rootless character of Champaner Group showing sharp discordance with granitic pluton. The findings of manifestation of pluton at a shallower depth imply a steep easterly plunge within the Champaner metasediments, whereas signature of pluton at a deeper level implies a gentle westerly plunge. The present method enables to assess how granite emplacement influences the surface structure.

Spatially controlled Fe and Si isotope variations: an alternative view on the formation of the Torres del Paine pluton

NASA Astrophysics Data System (ADS)

Gajos, Norbert A.; Lundstrom, Craig C.; Taylor, Alexander H.

2016-11-01

We present new Fe and Si isotope ratio data for the Torres del Paine igneous complex in southern Chile. The multi-composition pluton consists of an approximately 1 km vertical exposure of homogenous granite overlying a contemporaneous 250-m-thick mafic gabbro suite. This first-of-its-kind spatially dependent Fe and Si isotope investigation of a convergent margin-related pluton aims to understand the nature of granite and silicic igneous rock formation. Results collected by MC-ICP-MS show a trend of increasing δ56Fe and δ30Si with increasing silica content as well as a systematic increase in δ56Fe away from the mafic base of the pluton. The marginal Torres del Paine granites have heavier Fe isotope signatures (δ56Fe = +0.25 ± 0.02 2se) compared to granites found in the interior pluton (δ56Fe = +0.17 ± 0.02 2se). Cerro Toro country rock values are isotopically light in both Fe and Si isotopic systems (δ56Fe = +0.05 ± 0.02 ‰; δ30Si = -0.38 ± 0.07 ‰). The variations in the Fe and Si isotopic data cannot be accounted for by local assimilation of the wall rocks, in situ fractional crystallization, late-stage fluid exsolution or some combination of these processes. Instead, we conclude that thermal diffusion or source magma variation is the most likely process producing Fe isotope ratio variations in the Torres del Paine pluton.

An improved kinetics approach to describe the physical stability of amorphous solid dispersions.

PubMed

Yang, Jiao; Grey, Kristin; Doney, John

2010-01-15

The recrystallization of amorphous solid dispersions may lead to a loss in the dissolution rate, and consequently reduce bioavailability. The purpose of this work is to understand factors governing the recrystallization of amorphous drug-polymer solid dispersions, and develop a kinetics model capable of accurately predicting their physical stability. Recrystallization kinetics was measured using differential scanning calorimetry for initially amorphous efavirenz-polyvinylpyrrolidone solid dispersions stored at controlled temperature and relative humidity. The experimental measurements were fitted by a new kinetic model to estimate the recrystallization rate constant and microscopic geometry of crystal growth. The new kinetics model was used to illustrate the governing factors of amorphous solid dispersions stability. Temperature was found to affect efavirenz recrystallization in an Arrhenius manner, while recrystallization rate constant was shown to increase linearly with relative humidity. Polymer content tremendously inhibited the recrystallization process by increasing the crystallization activation energy and decreasing the equilibrium crystallinity. The new kinetic model was validated by the good agreement between model fits and experiment measurements. A small increase in polyvinylpyrrolidone resulted in substantial stability enhancements of efavirenz amorphous solid dispersion. The new established kinetics model provided more accurate predictions than the Avrami equation.

Pairing Heterocyclic Cations with closo-Icosahedral Borane and Carborane Anions, II: Benchtop Alternative Synthetic Methodologies for Binary Triazolium and Tetrazolium Salts with Significant Water Solubility (POSTPRINT)

DTIC Science & Technology

2012-01-01

interesting property, eutectic melting-point depression. Recrystallization of ternary salts 12–14 was not attempted because of a concern that a cation... recrystallization solvent mixture for these powders, and while some individual successes resulted, a general efficient solvent system for all salt...product recrystallizations could not be found. So, rather than recrystallizing each individual adduct, spectroscopic examination of the amorphous solids was

Effect of the Rate of Hot Compressive Deformation on the Kinetics of Dynamic and Static Recrystallization of Novel Medium-Carbon Medium-Alloy Steel

NASA Astrophysics Data System (ADS)

Khlusova, E. I.; Zisman, A. A.; Knyazyuk, T. V.; Novoskol'tsev, N. N.

2018-03-01

Dynamic and static recrystallization occurring under hot deformation at a rate of 1 and 100 sec - 1 in high-strength medium-carbon wear-resistant steels developed at CRISM "Prometey" for die forming of parts of driven elements of tillage machines is studied. The critical strain of dynamic recrystallization and the threshold temperatures and times of finish of static recrystallization are determined for the studied deformation rates at various temperatures.

Ultrasonic determination of recrystallization

NASA Technical Reports Server (NTRS)

Generazio, E. R.

1986-01-01

Ultrasonic attenuation was measured for cold worked Nickel 200 samples annealed at increasing temperatures. Localized dislocation density variations, crystalline order and colume percent of recrystallized phase were determined over the anneal temperature range using transmission electron microscopy, X-ray diffraction, and metallurgy. The exponent of the frequency dependence of the attenuation was found to be a key variable relating ultrasonic attenuation to the thermal kinetics of the recrystallization process. Identification of this key variable allows for the ultrasonic determination of onset, degree, and completion of recrystallization.

Calorimetric analysis of cryopreservation and freeze-drying formulations.

PubMed

Sun, Wendell Q

2015-01-01

Differential scanning calorimetry (DSC) is a commonly used thermal analysis technique in cryopreservation and freeze-drying research. It has been used to investigate crystallization, eutectic formation, glass transition, devitrification, recrystallization, melting, polymorphism, molecular relaxation, phase separation, water transport, thermochemistry, and kinetics of complex reactions (e.g., protein denaturation). Such information can be used for the optimization of protective formulations and process protocols. This chapter gives an introduction to beginners who are less familiar with this technique. It covers the instrument and its basic principles, followed by a discussion of the methods as well as examples of specific applications.

Deformation Characteristics and Recrystallization Response of a 9310 Steel Alloy

NASA Astrophysics Data System (ADS)

Snyder, David; Chen, Edward Y.; Chen, Charlie C.; Tin, Sammy

2013-01-01

The flow behavior and recrystallization response of a 9310 steel alloy deformed in the ferrite temperature range were studied in this work. Samples were compressed under various conditions of strain (0.6, 0.8 and multi-axial), strain rate (10-4 seconds-1 to 10-1 seconds-1) and temperature [811 K to 1033 K (538 °C to 760 °C)] using a Gleeble thermo-mechanical simulator. Deformation was characterized by both qualitative and quantitative means, using standard microscopy, electron backscatter diffraction (EBSD) analysis and flow stress modeling. The results indicate that deformation is primarily accommodated through dynamic recovery in sub-grain formation. EBSD analysis shows a continuous increase in sub-grain boundary misorientation with increasing strain, ultimately producing recrystallized grains from the sub-grains at high strains. This suggests that a sub-grain rotation recrystallization mechanism predominates in this temperature range. Analyses of the results reveal a decreasing mean dynamically recrystallized grain size with increasing Zener-Hollomon parameter, and an increasing recrystallized fraction with increasing strain.

Glass-Transition Temperature of the β-Relaxation as the Major Predictive Parameter for Recrystallization of Neat Amorphous Drugs.

PubMed

Kissi, Eric Ofosu; Grohganz, Holger; Löbmann, Korbinian; Ruggiero, Michael T; Zeitler, J Axel; Rades, Thomas

2018-03-15

Recrystallization of amorphous drugs is currently limiting the simple approach to improve solubility and bioavailability of poorly water-soluble drugs by amorphization of a crystalline form of the drug. In view of this, molecular mobility, α-relaxation and β-relaxation processes with the associated transition temperatures T gα and T gβ , was investigated using dynamic mechanical analysis (DMA). The correlation between the transition temperatures and the onset of recrystallization for nine amorphous drugs, stored under dry conditions at a temperature of 296 K, was determined. From the results obtained, T gα does not correlate with the onset of recrystallization under the experimental storage conditions. However, a clear correlation between T gβ and the onset of recrystallization was observed. It is shown that at storage temperature below T gβ , amorphous nifedipine retains its amorphous form. On the basis of the correlation, an empirical correlation is proposed for predicting the onset of recrystallization for drugs stored at 0% RH and 296 K.

Crustal Heterogeneity in the Basin and Range,

DTIC Science & Technology

1995-08-14

plutonism ). Seismic velocities are taken from laboratory measurements of rocks with similar compositions and are consistent with the bulk velocities... plutons intruded into Proterozoic North American crust in the Chocolate Mountains (Figure 2, upper crust) as describing the entire crustal column

Metamorphic facies map of Southeastern Alaska; distribution, facies, and ages of regionally metamorphosed rocks

USGS Publications Warehouse

Dusel-Bacon, Cynthia; Brew, D.A.; Douglass, S.L.

1996-01-01

Nearly all of the bedrock in Southeastern Alaska has been metamorphosed, much of it under medium-grade conditions during metamorphic episodes that were associated with widespread plutonism. The oldest metamorphisms affected probable arc rocks near southern Prince of Wales Island and occurred during early and middle Paleozoic orogenies. The predominant period of metamorphism and associated plutonism occurred during Early Cretaceous to early Tertiary time and resulted in the development of the Coast plutonic-metamorphic complex that extends along the inboard half of Southeastern Alaska. Middle Tertiary regional thermal metamorphism affected a large part of Baranof Island.

Incremental assembly and prolonged consolidation of Cordilleran magma chambers--Evidence from the Southern Rocky Mountain volcanic field

USGS Publications Warehouse

Lipman, Peter W.

2007-01-01

Plutons thus provide an integrated record of prolonged magmatic evolution, while volcanism offers snapshots of conditions at early stages. Growth of subvolcanic batholiths involved sustained multistage open-system processes. These commonly involved ignimbrite eruptions at times of peak power input, but assembly and consolidation processes continued at diminishing rates long after peak volcanism. Some evidence cited for early incremental pluton assembly more likely records late events during or after volcanism. Contrasts between relatively primitive arc systems dominated by andesitic compositions and small upper-crustal plutons versus more silicic volcanic fields and associated batholiths probably reflect intertwined contrasts in crustal thickness and magmatic power input. Lower power input would lead to a Cascade- or Aleutian-type arc system, where intermediate-composition magma erupts directly from middle- and lower-crustal storage without development of large shallow plutons. Andean and southern Rocky Mountain–type systems begin similarly with intermediate-composition volcanism, but increasing magma production, perhaps triggered by abrupt changes in plate boundaries, leads to development of larger upper-crustal reservoirs, more silicic compositions, large ignimbrites, and batholiths. Lack of geophysical evidence for voluminous eruptible magma beneath young calderas suggests that near-solidus plutons can be rejuvenated rapidly by high-temperature mafic recharge, potentially causing large explosive eruptions with only brief precursors.

Late Jurassic plutonism in the southwest U.S. Cordillera

USGS Publications Warehouse

Barth, A.P.; Wooden, J.L.; Howard, K.A.; Richards, J.L.

2008-01-01

Although plate reconstructions suggest that subduction was an approximately steady-state process from the mid-Mesozoic through the early Tertiary, recent precise geochronologic studies suggest highly episodic emplacement of voluminous continental-margin batholiths in the U.S. Cordillera. In central and southern California and western Arizona, major episodes of batholithic magmatism are known to have occurred in Permian-Triassic, Middle Jurassic, and late Early to Late Cretaceous time. However, recent studies of forearc-basin and continental-interior sediments suggest that Late Jurassic time was probably also a period of significant magmatism, although few dated plutons of this age have been recognized. We describe a belt of Late Jurassic plutonic and hypabyssal rocks at least 200 km in length that extends from the northwestern Mojave Desert through the Transverse Ranges. The belt lies outboard of both the voluminous Middle Jurassic arc and the ca. 148 Ma Independence dike swarm at these latitudes. The plutons include two intrusive suites emplaced between 157 and 149 Ma: a calc-alkaline suite compositionally unlike Permian-Triassic and Middle Jurassic mon-zonitic suites but similar to Late Cretaceous arc plutons emplaced across this region, and a contemporaneous but not comagmatic alkaline suite. The Late Jurassic was thus a time of both tectonic and magmatic transitions in the southern Cordillera. ?? 2008 The Geological Society of America.

Multiphase groundwater flow near cooling plutons

USGS Publications Warehouse

Hayba, D.O.; Ingebritsen, S.E.

1997-01-01

We investigate groundwater flow near cooling plutons with a computer program that can model multiphase flow, temperatures up to 1200??C, thermal pressurization, and temperature-dependent rock properties. A series of experiments examines the effects of host-rock permeability, size and depth of pluton emplacement, single versus multiple intrusions, the influence of a caprock, and the impact of topographically driven groundwater flow. We also reproduce and evaluate some of the pioneering numerical experiments on flow around plutons. Host-rock permeability is the principal factor influencing fluid circulation and heat transfer in hydrothermal systems. The hottest and most steam-rich systems develop where permeability is of the order of 10-15 m2. Temperatures and life spans of systems decrease with increasing permeability. Conduction-dominated systems, in which permeabilities are ???10-16m2, persist longer but exhibit relatively modest increases in near-surface temperatures relative to ambient conditions. Pluton size, emplacement depth, and initial thermal conditions have less influence on hydrothermal circulation patterns but affect the extent of boiling and duration of hydrothermal systems. Topographically driven groundwater flow can significantly alter hydrothermal circulation; however, a low-permeability caprock effectively decouples the topographically and density-driven systems and stabilizes the mixing interface between them thereby defining a likely ore-forming environment.

Magmatic evolution of a Cordilleran flare-up and its role in the creation of silicic crust.

PubMed

Ward, Kevin M; Delph, Jonathan R; Zandt, George; Beck, Susan L; Ducea, Mihai N

2017-08-22

The role of magmatic processes as a significant mechanism for the generation of voluminous silicic crust and the development of Cordilleran plateaus remains a lingering question in part because of the inherent difficulty in quantifying plutonic volumes. Despite this difficulty, a growing body of independently measured plutonic-to-volcanic ratios suggests the volume of plutonic material in the crust related to Cordilleran magmatic systems is much larger than is previously expected. To better examine the role of crustal magmatic processes and its relationship to erupted material in Cordilleran systems, we present a continuous high-resolution crustal seismic velocity model for an ~800 km section of the active South American Cordillera (Puna Plateau). Although the plutonic-to-volcanic ratios we estimate vary along the length of the Puna Plateau, all ratios are larger than those previously reported (~30:1 compared to 5:1) implying that a significant volume of intermediate to silicic plutonic material is generated in the crust of the central South American Cordillera. Furthermore, as Cordilleran-type margins have been common since the onset of modern plate tectonics, our findings suggest that similar processes may have played a significant role in generating and/or modifying large volumes of continental crust, as observed in the continents today.

Tilting, burial, and uplift of the Guadalupe Igneous Complex, Sierra Nevada, California

USGS Publications Warehouse

Haeussler, Peter J.; Paterson, Scott R.

1993-01-01

It is often incorrectly assumed that plutons have a relatively uneventful structural history after emplacement. The 151 Ma Guadalupe Igneous Complex (GIC) in the Foothills Terrane, California, was involved in three post-emplacement events: (1) ∼30° of southwestside-up tilting during ductile regional faulting and contraction, (2) burial of the pluton from ∼4 to 12 km during crustal thickening of the wall rocks, and (3) uplift with only minor tilting in the Late Cretaceous. Tilting of the pluton is indicated by (1) southwest to northeast gradational changes from layered gabbros and diorites to granites and granophyres; (2) northeastward dips of layering in gabbro, internal contacts, and bedding of overlying coeval(?) volcanic rocks; (3) northeastward decrease in wall-rock metamorphic grade; and (4) paleomagnetic data from 14 localities across the pluton. We argue that tilting occurred between 146-135 Ma during southwest-northeast-directed regional contraction. This contraction is indicated by widespread folds and cleavages and by reverse motion on the Bear Mountains fault zone (BMFZ), a large northeast-dipping shear zone that bounds the GIC on its southwest side. Burial of the GIC, which overlapped in time but outlasted tilting, is suggested by (1) post-emplacement contractional faulting, folding, and cleavage development; (2) analyses of strains associated with widespread cleavage that indicate vertical thickening of ∼100% and (3) microstructural and mineral assemblage data that indicate shallow emplacement of the GIC, in contrast to mineral assemblage and limited geobarometric data from adjacent 120-110 Ma plutons that indicate moderate emplacement levels. Late Cretaceous uplift is indicated by 95-75 Ma sedimentary rocks that unconformably overlie the 120-110 Ma plutons.This geologic history is interesting for several reasons. First, although the GIC participated in extensive post-emplacement deformation, it lacks internal structural evidence of these events, except locally along the Bear Mountains fault zone. Second, the agreement between paleomagnetic and structural evidence for tilting suggests that no large latitudinal displacement of the GIC is required. Third, the paleomagnetic data also help to define the geometry of the magma chamber now represented by the GIC. Lack of streaking of paleomagnetic site-mean directions demonstrates that the pluton acted as a single unit after cooling through the blocking temperature (450-560 °C) of low-titanium titanomagnetite; however, variations in the dip of internal layering and contacts, from 70° at the base to 30° near the top of the pluton, indicate that not all of these features were horizontal and planar when they formed. We propose that this variation in dip of layering is most consistent with sidewall crystallization of magma resulting in drape of layering along the walls of the intrusion. Therefore, internal layering within this pluton does not record paleohorizontal.

The deformation record of olivine in mylonitic peridotites from the Finero Complex, Ivrea Zone: Separate deformation cycles during exhumation

NASA Astrophysics Data System (ADS)

Matysiak, Agnes K.; Trepmann, Claudia A.

2015-12-01

Mylonitic peridotites from the Finero complex are investigated to detect characteristic olivine microfabrics that can resolve separate deformation cycles at different metamorphic conditions. The heterogeneous olivine microstructures are characterized by deformed porphyroclasts surrounded by varying amounts of recrystallized grains. A well-developed but only locally preserved foam structure is present in recrystallized grain aggregates. This indicates an early stage of dynamic recrystallization and subsequent recovery and recrystallization at quasi-static stress conditions, where the strain energy was reduced such that a reduction in surface energy controlled grain boundary migration. Ultramylonites record a renewed stage of localized deformation and recrystallization by a second generation of recrystallized grains that do not show a foam structure. This second generation of recrystallized grains as well as sutured grain and kink band boundaries of porphyroclasts indicate that these microstructures developed during a stage of localized deformation after development of the foam structure. The heterogeneity of the microfabrics is interpreted to represent several (at least two) cycles of localized deformation separated by a marked hiatus with quasi-static recrystallization and recovery and eventually grain growth. The second deformation cycle did not only result in reactivation of preexisting shear zones but instead also locally affected the host rock that was not deformed in the first stage. Such stress cycles can result from sudden increases in differential stress imposed by seismic events, i.e., high stress-loading rates, during exhumation of the Finero complex.

Uranium-lead isotopic ages from the Sierra Nevada Batholith, California

NASA Astrophysics Data System (ADS)

Chen, James H.; Moore, James G.

1982-06-01

This study provides new information on the timing and distribution of Mesozoic magmatic events in the Sierra Nevada batholithic complex chiefly between 36° and 37°N. latitude. U-Pb ages have been determined for 133 zircon and 7 sphene separates from 82 samples of granitoid rocks. Granitoid rocks in this area range in age from 217 to 80 m.y. Triassic intrusions are restricted to the east side of the batholith; Jurassic plutons occur south of the Triassic plutons east of the Sierra Nevada, as isolated masses within the Cretaceous batholith, and in the western foothills of the range; Cretaceous plutons form a continuous belt along the axis of the batholith and occur as isolated masses east of the Sierra Nevada. No granitic intrusions were emplaced for 37 m.y. east of the Sierra Nevada following the end of Jurassic plutonism. However, following emplacement of the eastern Jurassic granitoids, regional extension produced a fracture system at least 350 km long into which the dominantly mafic, calc-alkalic Independence dike swarm was intruded 148 m.y. ago. The dike fractures probably represents a period of regional crustal extension caused by a redistribution of the regional stress pattern accompanying the Nevadan orogeny. Intrusion of Cretaceous granitic plutons began in large volume about 120 m.y. ago in the western Sierra Nevada and migrated steadily eastward for 40 m.y. at a rate of 2.7 mm/y. This slow and constant migration indicates remarkably uniform conditions of subduction with perhaps downward migration of parent magma generation or a slight flattening of the subduction zone. Such steady conditions could be necessary for the production of large batholithic complexes such as the Sierra Nevada. The abrupt termination of plutonism 80 m.y. ago may have resulted from an increased rate of convergence of the American and eastern Pacific plates and dramatic flattening of the subduction zone. U-Pb ages of the Giant Forest-alaskite sequence in Sequoia National Park are all in the range 99±3 m.y., indicating a relatively short period of emplacement and cooling for this nested group of plutons. U-Pb ages of a mafic inclusion and its host granodiorite indicate that both were derived from a common source or that the mafic inclusion was totally equilibrated with the granodioritic magma. Comparison of isotopic ages determined by different methods such as zircon U-Pb, sphene U-Pb, hornblende K-Ar, and biotite K-Ar suggests that zircon U-Pb ages generally approximate the emplacement age of a pluton. However, some plutons probably contain inherited or entrained old zircons, and the zircons of some samples are disturbed by younger thermal and metamorphic events. The ages reported here are consistent with U-Pb age determinations previously made on granitic rocks to the north [Stern et al., 1981], The age distribution of granitic belts determined here is in general agreement with those established by K-Ar dating [Evernden and Kistler, 1970] but does not differentiate the five epochs of plutonism determined in their study.

Uranium-lead isotopic ages from the Sierra Nevada Batholith, California

USGS Publications Warehouse

Chen, J.

1982-01-01

This study provides new information on the timing and distribution of Mesozoic magmatic events in the Sierra Nevada batholithic complex chiefly between 36° and 37°N. latitude. U-Pb ages have been determined for 133 zircon and 7 sphene separates from 82 samples of granitoid rocks. Granitoid rocks in this area range in age from 217 to 80 m.y. Triassic intrusions are restricted to the east side of the batholith; Jurassic plutons occur south of the Triassic plutons east of the Sierra Nevada, as isolated masses within the Cretaceous batholith, and in the western foothills of the range; Cretaceous plutons form a continuous belt along the axis of the batholith and occur as isolated masses east of the Sierra Nevada. No granitic intrusions were emplaced for 37 m.y. east of the Sierra Nevada following the end of Jurassic plutonism. However, following emplacement of the eastern Jurassic granitoids, regional extension produced a fracture system at least 350 km long into which the dominantly mafic, calc-alkalic Independence dike swarm was intruded 148 m.y. ago. The dike fractures probably represents a period of regional crustal extension caused by a redistribution of the regional stress pattern accompanying the Nevadan orogeny. Intrusion of Cretaceous granitic plutons began in large volume about 120 m.y. ago in the western Sierra Nevada and migrated steadily eastward for 40 m.y. at a rate of 2.7 mm/y. This slow and constant migration indicates remarkably uniform conditions of subduction with perhaps downward migration of parent magma generation or a slight flattening of the subduction zone. Such steady conditions could be necessary for the production of large batholithic complexes such as the Sierra Nevada. The abrupt termination of plutonism 80 m.y. ago may have resulted from an increased rate of convergence of the American and eastern Pacific plates and dramatic flattening of the subduction zone. U-Pb ages of the Giant Forest-alaskite sequence in Sequoia National Park are all in the range 99±3 m.y., indicating a relatively short period of emplacement and cooling for this nested group of plutons. U-Pb ages of a mafic inclusion and its host granodiorite indicate that both were derived from a common source or that the mafic inclusion was totally equilibrated with the granodioritic magma. Comparison of isotopic ages determined by different methods such as zircon U-Pb, sphene U-Pb, hornblende K-Ar, and biotite K-Ar suggests that zircon U-Pb ages generally approximate the emplacement age of a pluton. However, some plutons probably contain inherited or entrained old zircons, and the zircons of some samples are disturbed by younger thermal and metamorphic events. The ages reported here are consistent with U-Pb age determinations previously made on granitic rocks to the north [Stern et al., 1981], The age distribution of granitic belts determined here is in general agreement with those established by K-Ar dating [Evernden and Kistler, 1970] but does not differentiate the five epochs of plutonism determined in their study.

High-pressure thermal aureoles around two Neoproterozoic synorogenic magmatic epidote-bearing granitoids, Northeastern Brazil

NASA Astrophysics Data System (ADS)

Caby, Renaud; Sial, Alcides N.; Ferreira, Valderez P.

2009-02-01

Unusual high-pressure inner thermal aureoles are described from the Minador and Angico Torto epidote-bearing tonalitic plutons that emplaced into greenschist-facies metasedimentary rocks of the Neoproterozoic Cachoeirinha-Salgueiro belt, northeastern Brazil. The foliated pelitic hornfelses display the mineral assemblage garnet, kyanite, staurolite, muscovite, biotite, plagioclase ± quartz. Rare fibrolite is only found very close to the contacts. Hornfelses display steep mineral lineations and steeply-dipping foliations concordant with magmatic contacts. Leucocratic veinlets containing quartz, oligoclase, garnet, kyanite, staurolite, rutile and ilmenite suggest that limited melting conditions were reached very close to magmatic contacts ( T ⩾ 650 °C, P around 8 kbar). These high-pressure hornfelses form a few meters thick, rigid envelopes around the two plutons. Contrary to known examples of kyanite-bearing hornfelses that recorded high-temperature decompression, the nearly isobaric cooling down to ca. 450 °C is constrained by 3.20-3.30 Si contents of retrogressive phengites from both inner hornfelses and ductilely-deformed tonalite at the pluton margins. Isograds and bathograds are, therefore, apparently telescoped due to HP/LT shearing, possibly caused by subsequent differential vertical movements affecting these two solidified plutons. The unusual depth of emplacement of these syn-kinematic calc-alkaline plutons is explained by a tentative geodynamic model involving a pre-620 Ma-subduction setting. Resumen Las aureolas internas que rodean dos plutones tonalíticos emplazados dentro de rocas cajas en facies esquistos verdes del Cinturón-plegado Cachoeirinha-Salgueiro al noreste de Brasil, contienen hornfelses pelíticos foliados con granate, kyanita, estaurolita, muscovita, biotita, plagioclasa ± cuarzo. Fibrolita es rara ó es encontrada solamente cerca de las zonas de contacto. Los hornfelses desarrollaron foliaciones concordantes con buzamiento fuerte cerca de los contactos magmáticos y muestran lineaciones minerales casi verticales. Venillas leucocraticas contienen cuarzo, oligoclasa, granate, kyanita, estaurolita, rutilo e ilmenita sugiriendo que el límite en las condiciones de fusión fueron cercanas a los contactos magmáticos ( T ⩾ 650 °C, P entorno 8 kbar). Estos hornfelses de alta presión forman una cobertura rígida de poco metros entorno a los dos plutones. Contrariamente a lo conocido en diferentes ejemplos de hornfelses con kyanita con registro de descompresión, la isóbara de enfriamiento para cerca de 450 °C está controlada por el contenido de Si 3.20-3.30 de fengitas retrógradas, en los hornfelses internos y en las márgenes de los plutones donde las tonalitas están deformadas ductilmente. Isógradas y batógradas son, por lo tanto, aparentemente telescopadas debido a cizalla de alta presión/baja temperatura, posiblemente causado por subsecuentes movimientos verticales diferenciales afectando estos dos plutones solidificados. El emplazamiento a una profundidad inusual de estos plutones calci-alcalinos syn-cinemáticos es explicado por un modelo geodinámico tentativo que involucra un escenario de subducción pre-620 Ma.

Geochemical and Isotopic Features of Çaykara (Trabzon, NE Turkey) Intrusive Complex

NASA Astrophysics Data System (ADS)

Sen, Cuneyt; Aydınçakır, Emre; Aydin, Faruk; Dokuz, Abdurrahman; Karslı, Orhan; Yılmazer, Sinan; Dündar, Buket

2017-04-01

Çaykara (Trabzon) Intrusive Complex is located at the eastern part of the Kaçkar Batholith. In the complex, Gündoǧdu-Boǧalı Plutons is Upper Cretaceous in aged, and Uzundere and Eǧerler Plutons are Eocene in aged. Gündoǧdu-Boǧa Plutons crop out around Araklı-Bahçecik villages, and are represented by the granitic to granodioritic rocks in composition showing porphyritic-granular texture. These rocks contain dark coloured, semi-rounded to rounded, wedged, fine-grained diorite and monzodiorite anclaves. Uzuntarla Pluton extends at E-W from Köknar-Karaçam-Uzuntarla sub-districs to south of Çaykara towards Bahçecik sub-district of Araklı. The rocks of the Uzuntarla Pluton are generally diorite to granodiorite in composition with porphyritic in texture. Eǧerler Pluton exposes at southern of the Çaykara Intrusive Complex. It's mineralogical composition is changing from diorite to granite with medium-coarse grain granular texture. The Upper Cretaceous plutonic rocks are characterized by ɛNd(i) values range from -1.5 to -9.7, whereas 87Sr/86Sr(i) values range from 0.7052 to 0.7119. Nd model ages are between 0.94 and 1.52 Ga. 206Pb/204Pb(i), 207Pb/204Pb(i) and 208Pb/204Pb(i) contents of samples change from 18.24 to 18.72, 15.59 to 15.66 and 37.93-38.64, respectively. The δ18O values in the investigated samples range from 4.0 ‰ to 6.7 ‰ and have similar ratios to I-type granitoides.The Eocene plutonic rocks are characterized by ɛNd(i) values range from -0.4 to -6.0, whereas 87Sr/86Sr(i) values range from 0.7050 to 0.7143. Nd model ages are between 0.81 and 1.32 Ga. 206Pb/204Pb(i), 207Pb/204Pb(i) and 208Pb/204Pb(i) contents of samples change from 18.241to 18.57, 15.58 to 15.63 and 38.22-38.92, respectively. The δ18O values in the investigated samples range from 5.8 ‰ to 7.1 ‰ and have similar ratios to I-type granitoides. Upper Cretaceous and Eocene aged Plutons in the study area are high-K calc-alkaline in composition and display metaluminous to peraluminous characteristics. The primitive mantle normalized multi-element variation diagrams of the studied samples show enrichment in LILE relative to HFSE and also negative Nb, Ta, P, Ti and positive Pb anomalies. Chondrite-normalized rare earth element (REE) patterns are [(La/Lu)N=8-10] and display negative Eu anomalies. When obtained initial data is plotted on tectonic discrimination diagram, as expected the tectonic setting of the plutons in subject was observed representing island arc environment. This work was supported by the Scientific and Technological Research Council of Turkey (TUBITAK, grant 114Y219).

Matrix recrystallization for MALDI-MS imaging of maize lipids at high-spatial resolution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duenas, Maria Emilia; Carlucci, Laura; Lee, Young Jin

Matrix recrystallization is optimized and applied to improve lipid ion signals in maize embryos and leaves. A systematic study was performed varying solvent and incubation time. During this study, unexpected side reactions were found when methanol was used as a recrystallization solvent, resulting in the formation of a methyl ester of phosphatidic acid. Furthermore, using an optimum recrystallization condition with isopropanol, there is no apparent delocalization demonstrated with a transmission electron microscopy (TEM) pattern and maize leaf images obtained at 10 μm spatial resolution.

Matrix recrystallization for MALDI-MS imaging of maize lipids at high-spatial resolution

DOE PAGES

Duenas, Maria Emilia; Carlucci, Laura; Lee, Young Jin

2016-06-27

Matrix recrystallization is optimized and applied to improve lipid ion signals in maize embryos and leaves. A systematic study was performed varying solvent and incubation time. During this study, unexpected side reactions were found when methanol was used as a recrystallization solvent, resulting in the formation of a methyl ester of phosphatidic acid. Furthermore, using an optimum recrystallization condition with isopropanol, there is no apparent delocalization demonstrated with a transmission electron microscopy (TEM) pattern and maize leaf images obtained at 10 μm spatial resolution.

Matrix Recrystallization for MALDI-MS Imaging of Maize Lipids at High-Spatial Resolution

NASA Astrophysics Data System (ADS)

Dueñas, Maria Emilia; Carlucci, Laura; Lee, Young Jin

2016-09-01

Matrix recrystallization is optimized and applied to improve lipid ion signals in maize embryos and leaves. A systematic study was performed varying solvent and incubation time. During this study, unexpected side reactions were found when methanol was used as a recrystallization solvent, resulting in the formation of a methyl ester of phosphatidic acid. Using an optimum recrystallization condition with isopropanol, there is no apparent delocalization demonstrated with a transmission electron microscopy (TEM) pattern and maize leaf images obtained at 10 μm spatial resolution.

Correlation buildup during recrystallization in three-dimensional dusty plasma clusters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schella, André; Mulsow, Matthias; Melzer, André

2014-05-15

The recrystallization process of finite three-dimensional dust clouds after laser heating is studied experimentally. The time-dependent Coulomb coupling parameter is presented, showing that the recrystallization starts with an exponential cooling phase where cooling is slower than damping by the neutral gas friction. At later times, the coupling parameter oscillates into equilibrium. It is found that a large fraction of cluster states after recrystallization experiments is in metastable states. The temporal evolution of the correlation buildup shows that correlation occurs on even slower time scale than cooling.

Matrix Recrystallization for MALDI-MS Imaging of Maize Lipids at High-Spatial Resolution.

PubMed

Dueñas, Maria Emilia; Carlucci, Laura; Lee, Young Jin

2016-09-01

Matrix recrystallization is optimized and applied to improve lipid ion signals in maize embryos and leaves. A systematic study was performed varying solvent and incubation time. During this study, unexpected side reactions were found when methanol was used as a recrystallization solvent, resulting in the formation of a methyl ester of phosphatidic acid. Using an optimum recrystallization condition with isopropanol, there is no apparent delocalization demonstrated with a transmission electron microscopy (TEM) pattern and maize leaf images obtained at 10 μm spatial resolution. Graphical Abstract ᅟ.

Ultrasonic attenuation measurements determine onset, degree, and completion of recrystallization

NASA Technical Reports Server (NTRS)

Generazio, E. R.

1988-01-01

Ultrasonic attenuation was measured for cold worked Nickel 200 samples annealed at increasing temperatures. Localized dislocation density variations, crystalline order and volume percent of recrystallized phase were determined over the anneal temperature range using transmission electron microscopy, X-ray diffraction, and metallurgy. The exponent of the frequency dependence of the attenuation was found to be a key variable relating ultrasonic attenuation to the thermal kinetics of the recrystallization process. Identification of this key variable allows for the ultrasonic determination of onset, degree, and completion of recrystallization.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Y. B.; Budai, J. D.; Tischler, J. Z.

How boundaries surrounding recrystallization grains migrate through the 3D network of dislocation boundaries in deformed crystalline materials is unknown and critical for the resulting recrystallized crystalline materials. Furthermore, by using X-ray Laue diffraction microscopy, we show for the first time the migration pattern of a typical recrystallization boundary through a well-characterized deformation matrix. The data provide a unique possibility to investigate effects of both boundary misorientation and plane normal on the migration, information which cannot be accessed with any other techniques. Our results show that neither of these two parameters can explain the observed migration behavior. Instead we suggest thatmore » the subdivision of the deformed microstructure ahead of the boundary plays the dominant role. Our experimental observations challenge the assumptions of existing recrystallization theories, and set the stage for determination of mobilities of recrystallization boundaries.« less

Grain Boundary Evolution of Cold-Rolled FePd Alloy during Recrystallization at Disordering Temperature

PubMed Central

Lin, Hung-Pin; Chen, Delphic; Kuo, Jui-Chao

2015-01-01

In this study, the grain boundary character and texture of 50% and 90% cold-rolled FePd alloy was investigated during recrystallization at 700 °C. Electron backscatter diffraction (EBSD) measurements were performed on the rolling direction to normal direction section. Kernel average misorientation (KAM) calculated from EBSD measurements was employed to determine the recrystallization fraction. The Avrami exponent n of recrystallization is 1.9 and 4.9 for 50% and 90% cold rolling, respectively. The new formation of texture reveals random texture during the recrystallization process. As annealing time increased, the number of high angle boundary (HAGB) and coincidence site lattice (CSL) increased with consumption of low angle boundary (LAGB). In addition, possible transformations between different grain boundaries are observed here.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Kun; Bannister, Mark E.; Meyer, Fred W.

Here, in a magnetic fusion energy (MFE) device, the plasma-facing materials (PFMs) will be subjected to tremendous fluxes of ions, heat, and neutrons. The response of PFMs to the fusion environment is still not well defined. Tungsten metal is the present candidate of choice for PFM applications such as the divertor in ITER. However, tungsten's microstructure will evolve in service, possibly to include recrystallization. How tungsten's response to plasma exposure evolves with changes in microstructure is presently unknown. In this work, we have exposed hot-worked and recrystallized tungsten to an 80 eV helium ion beam at a temperature of 900more » °C to fluences of 2 × 10 23 or 20 × 10 23 He/m 2. This resulted in a faceted surface structure at the lower fluence or short but well-developed nanofuzz structure at the higher fluence. There was little difference in the hot-rolled or recrystallized material's near-surface (≤50 nm) bubbles at either fluence. At higher fluence and deeper depth, the bubble populations of the hot-rolled and recrystallized were different, the recrystallized being larger and deeper. This may explain previous high-fluence results showing pronounced differences in recrystallized material. The deeper penetration in recrystallized material also implies that grain boundaries are traps, rather than high-diffusivity paths.« less

High temperature microstructural stability and recrystallization mechanisms in 14YWT alloys

DOE PAGES

Aydogan, E.; El-Atwani, O.; Takajo, S.; ...

2018-02-09

In-situ neutron diffraction experiments were performed on room temperature compressed 14YWT nanostructured ferritic alloys at 1100°C and 1150°C to understand their thermally activated static recrystallization mechanisms. The existence of high density of Y-Ti-O rich nano-oxides (<5 nm) shift the recrystallization temperature up due to Zener pinning of the grain boundaries, making these materials attractive for high temperature applications. This study serves to quantify the texture evolution in-situ and understand the effect of particles on the recrystallization mechanisms in 14YWT alloys. We have shown, both experimentally and theoretically, that there is considerable recovery in the 20% compressed sample after 6.5 hmore » annealing at 1100°C while recrystallization occurs within an hour of annealing at 1100°C and 1150°C in the 60% compressed samples. Moreover, the 60% compressed samples show {112}<110> and {112}<111> texture components during annealing, in contrast to the conventional recrystallization textures in body centered cubic alloys. Furthermore, nano-oxide size, shape, density and distribution are considerably different in unrecrystallized and abnormally grown grains. Transmission electron microscopy analysis shows that oxide particles having a size between 5 and 30 nm play a critical role for recrystallization mechanisms in 14YWT nanostructured ferritic alloys.« less

High temperature microstructural stability and recrystallization mechanisms in 14YWT alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aydogan, E.; El-Atwani, O.; Takajo, S.

In-situ neutron diffraction experiments were performed on room temperature compressed 14YWT nanostructured ferritic alloys at 1100°C and 1150°C to understand their thermally activated static recrystallization mechanisms. The existence of high density of Y-Ti-O rich nano-oxides (<5 nm) shift the recrystallization temperature up due to Zener pinning of the grain boundaries, making these materials attractive for high temperature applications. This study serves to quantify the texture evolution in-situ and understand the effect of particles on the recrystallization mechanisms in 14YWT alloys. We have shown, both experimentally and theoretically, that there is considerable recovery in the 20% compressed sample after 6.5 hmore » annealing at 1100°C while recrystallization occurs within an hour of annealing at 1100°C and 1150°C in the 60% compressed samples. Moreover, the 60% compressed samples show {112}<110> and {112}<111> texture components during annealing, in contrast to the conventional recrystallization textures in body centered cubic alloys. Furthermore, nano-oxide size, shape, density and distribution are considerably different in unrecrystallized and abnormally grown grains. Transmission electron microscopy analysis shows that oxide particles having a size between 5 and 30 nm play a critical role for recrystallization mechanisms in 14YWT nanostructured ferritic alloys.« less

Recrystallization and grain growth behavior of rolled tungsten under VDE-like short pulse high heat flux loads

NASA Astrophysics Data System (ADS)

Yuan, Y.; Greuner, H.; Böswirth, B.; Krieger, K.; Luo, G.-N.; Xu, H. Y.; Fu, B. Q.; Li, M.; Liu, W.

2013-02-01

Short pulse heat loads expected for vertical displacement events (VDEs) in ITER were applied in the high heat flux (HHF) test facility GLADIS at IPP-Garching onto samples of rolled W. Pulsed neutral beams with the central heat flux of 23 MW/m2 were applied for 0.5, 1.0 and 1.5 s, respectively. Rapid recrystallization of the adiabatically loaded 3 mm thick samples was observed when the pulse duration was up to 1.0 s. Grains grew markedly following recrystallization with increasing pulse length. The recrystallization temperature and temperature dependence of the recrystallized grain size were also investigated. The results showed that the recrystallization temperature of the W grade was around 2480 °C under the applied heat loading condition, which was nearly 1150 °C higher than the conventional recrystallization temperature, and the grains were much finer. A linear relationship between the logarithm of average grain size (ln d) and the inverse of maximum surface temperature (1/Tmax) was found and accordingly the activation energy for grain growth in temperature evolution up to Tmax in 1.5 s of the short pulse HHF load was deduced to be 4.1 eV. This provided an effective clue to predict the structure evolution under short pulse HHF loads.

Bulk rock and mineral chemistries and ascent rates of high-K calc-alkalic epidote-bearing magmas, Northeastern Brazil

NASA Astrophysics Data System (ADS)

Brasilino, R. G.; Sial, A. N.; Ferreira, V. P.; Pimentel, M. M.

2011-12-01

A manifestation of the Pan-African-Brasiliano orogeny (700-550 Ma) in northeastern Brazil was the emplacement of widespread Neoproterozoic granitoids in diverse tectonic terranes. Among these plutons are the magmatic epidote-bearing Conceição das Creoulas, Caldeirão Encantado, Murici, and Boqueirão plutons, located close to the boundary between the Alto Pajeú and Cachoeirinha-Salgueiro terranes. The plutons are high-K calc-alkalic granodiorites to monzogranites, with tabular K-feldspar megacrysts. Pistacite [atomic Fe+ 3/(Fe3++ Al)] in epidote in these granitoids ranges from 21 to 27%. High oxygen fugacity (log fO2 - 19 to - 13) and the preservation of epidote suggest that the magma was oxidized. Al-in-hornblende barometry indicates hornblende solidification between 6 and 8 kbar, at 620 to 780 °C according to the hornblende-plagioclase thermometer. Zircon saturation thermometry attests to a near-liquidus temperature range from 794 to 853 °C. Partial corrosion of magmatic epidote in these four plutons occurred during an interval of no more than 10-30 years, which corresponds to maximum magma ascent rates of 650-1000 m/year. Diking, associated with regional shearing, probably facilitated rapid transport of granitic magma through hot continental crust at peak metamorphism, and permitted survival of epidote that was out of equilibrium at the low pressure of final emplacement. Similarities between mineralogical composition, chemistry, and isotopic compositions (εNd(0.60Ga) between - 2 and - 5,TDM from 1.2 to 1.3 Ga, δ18O values > 10‰, V-SMOW) of these four plutons and Neoproterozoic magmatic epidote-bearing plutons elsewhere in northeastern Brazil, argue for similar metabasaltic/mafic sources that had previously experienced low-temperature alteration.

Crustally derived granites in Dali, SW China: new constraints on silicic magmatism of the Central Emeishan Large Igneous Province

NASA Astrophysics Data System (ADS)

Zhu, Bei; Peate, David W.; Guo, Zhaojie; Liu, Runchao; Du, Wei

2017-10-01

We have identified a new crustally derived granite pluton that is related to the Emeishan Large Igneous Province (ELIP). This pluton (the Wase pluton, near Dali) shows two distinct SHRIMP zircon U-Pb age groups ( 768 and 253 Ma). As it has an intrusive relationship with Devonian limestone, the younger age is interpreted as its formation, which is related to the ELIP event, whereas the 768 Ma Neoproterozoic-aged zircons were inherited from Precambrian crustal component of the Yangtze Block, implying the pluton has a crustally derived origin. This is consistent with its peraluminous nature, negative Nb-Ta anomaly, enrichment in light rare earth elements, high 87Sr/86Sr(i) ratio (0.7159-0.7183) and extremely negative ɛ(Nd)(i) values (-12.15 to -13.70), indicative of melts derived from upper crust materials. The Wase pluton-intruded Devonian strata lie stratigraphically below the Shangcang ELIP sequence, which is the thickest volcanic sequence ( 5400 m) in the whole ELIP. The uppermost level of the Shangcang sequence contains laterally restricted rhyolite. Although the rhyolite has the same age as the Wase pluton, its geochemical features demonstrate a different magma origin. The rhyolite displays moderate 87Sr/86Sr(i) (0.7053), slightly negative ɛ(Nd)(i) (-0.18) and depletions in Ba, Cs, Eu and Sr, implying derivation from differentiation of a mantle-derived mafic magma source. The coexistence of crustally and mantle-derived felsic systems, along with the robust development of dike swarms, vent proximal volcanics and thickest flood basalts piles in Dali, shows that the Dali area was probably where the most active Emeishan magmatism had once existed.

Multistage magma emplacement and progressive strain accumulation in the shallow-level Krkonoše-Jizera plutonic complex, Bohemian Massif

NASA Astrophysics Data System (ADS)

Žák, Jiří; Verner, Kryštof; Sláma, Jiří; Kachlík, Václav; Chlupáčová, Marta

2013-09-01

relationships combined with new U-Pb zircon geochronology suggest that the shallow-level Krkonoše-Jizera plutonic complex, northern Bohemian Massif, was assembled successively from bottom to top, starting with emplacement of the separately evolved S-type Tanvald granite (317.3 ± 2.1 Ma), followed by at least two voluminous batches of the I-type porphyritic Liberec (319.5 ± 2.3 Ma) and Jizera (320.1 ± 3.0 Ma and 319.3 ± 3.7 Ma) granites. The intrusive sequence was completed by uppermost, minor intrusions of the equigranular Harrachov (315.0 ± 2.7 Ma) and Krkonoše granites. The I-type granites exhibit an unusually complex pattern of superposed feldspar phenocryst and magnetic fabrics as revealed from the anisotropy of magnetic susceptibility (AMS). The outer Liberec granite preserves margin-parallel foliations and lineations, interpreted to record emplacement-related strain captured by cooling from the pluton floor and walls. In contrast, the inner Jizera, Harrachov, and Krkonoše granites were overprinted by synmagmatic strain resulting from dextral movements along regional strike-slip faults cutting the opposite ends of the plutonic complex. Late-stage felsic dikes in the Liberec and Jizera granites reorient from horizontal to vertical (lineation-perpendicular) attitude in response to changing the least principal stress direction, whereas mafic schlieren do not do so, representing only randomly oriented small-scale thermal-mechanical instabilities in the phenocryst framework. In general, this case example challenges the common approach of inferring pluton-wide magma flow from interpolated foliation, lineation, and schlieren patterns. More likely, magmatic fabrics in large plutons record complex temporal succession of superposed strains resulting from diverse processes at multiple scales.

Geologic Map of the Tower Peak Quadrangle, Central Sierra Nevada, California

USGS Publications Warehouse

Wahrhaftig, Clyde

2000-01-01

Introduction The Tower Peak quadrangle, which includes northernmost Yosemite National Park, is located astride the glaciated crest of the central Sierra Nevada and covers an exceptionally well-exposed part of the Sierra Nevada batholith. Granitic plutonic rocks of the batholith dominate the geology of the Tower Peak quadrangle, and at least 18 separate pre-Tertiary intrusive events have been identified. Pre-Cretaceous metamorphic rocks crop out in the quadrangle in isolated roof pendants and septa. Tertiary volcanic rocks cover granitic rocks in the northern part of the quadrangle, but are not considered in this brief summary. Potassium-argon (K-Ar) age determinations for plutonic rocks in the quadrangle range from 83 to 96 million years (Ma), including one of 86 Ma for the granodiorite of Lake Harriet (Robinson and Kistler, 1986). However, a rubidium-strontium whole-rock isochron age of 129 Ma has been obtained for the Lake Harriet pluton (Robinson and Kistler, 1986), which field evidence indicates is the oldest plutonic body within the quadrangle. This suggests that some of the K-Ar ages record an episode of resetting during later thermal events and are too young. The evidence indicates that all the plutonic rocks are of Cretaceous age, with the youngest being the Cathedral Peak Granodiorite at about 83 Ma. The pre-Tertiary rocks of the Tower Peak quadrangle fall into two groups: (1) an L-shaped area of older plutonic and metamorphic rocks, 3 to 10 km wide, that extends diagonally both northeast and southeast from near the center of the quadrangle; and (2) a younger group of large, probably composite intrusions that cover large areas in adjacent quadrangles and extend into the Tower Peak quadrangle from the east, north, and southwest.

Geographically diverse Australian isolates of Melissococcus pluton exhibit minimal genotypic diversity by restriction endonuclease analysis.

PubMed

Djordjevic, S P; Smith, L A; Forbes, W A; Hornitzky, M A

1999-04-15

Melissococcus pluton, the causative agent of European foulbrood is an economically significant disease of honey bees (Apis mellifera) across most regions of the world and is prevalent throughout most states of Australia. 49 Isolates of M. pluton recovered from diseased colonies or honey samples in New South Wales, Queensland, South Australia, Tasmania and Victoria were compared using SDS-PAGE, Western immunoblotting and restriction endonuclease analyses. DNA profiles of all 49 geographically diverse isolates showed remarkably similar AluI profiles although four isolates (one each from Queensland, South Australia, New South Wales and Victoria) displayed minor profile variations compared to AluI patterns of all other isolates. DNA from a subset of the 49 Australian and three isolates from the United Kingdom were digested separately with the restriction endonucleases CfoI, RsaI and DraI. Restriction endonuclease fragment patterns generated using these enzymes were also similar although minor variations were noted. SDS-PAGE of whole cell proteins from 13 of the 49 isolates from different states of Australia, including the four isolates which displayed minor profile variations (AluI) produced indistinguishable patterns. Major immunoreactive proteins of approximate molecular masses of 21, 24, 28, 30, 36, 40, 44, 56, 60, 71, 79 and 95 kDa were observed in immunoblots of whole cell lysates of 22 of the 49 isolates and reacted with rabbit hyperimmune antibodies raised against M. pluton whole cells. Neither SDS-PAGE or immunoblotting was capable of distinguishing differences between geographically diverse isolates of M. pluton. Collectively these data confirm that Australian isolates of M. pluton are genetically homogeneous and that this species may be clonal. Plasmid DNA was not detected in whole cell DNA profiles of any isolate resolved using agarose gel electrophoresis.

Publications - SR 56 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

Minerals; Iron; Jade; Jurassic; Kanayut Conglomerate; Kayak Shale; Kuskokwim Group; Lead; Limestone; Lode ; Nickel; Nikolai Greenstone; Noatak Sandstone; Nome Group; Nuggets; Orca Group; Ordovician; Ores ; Paleozoic; Palladium; Pennsylvanian; Placer; Platinum; Platinum Group Elements; Plutonic; Plutonic Hosted

Publications - SR 54 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

Minerals; Iron; Jade; Jurassic; Kanayut Conglomerate; Kayak Shale; Kuskokwim Group; Lead; Limestone; Lode ; Nickel; Nikolai Greenstone; Noatak Sandstone; Nome Group; Nuggets; Orca Group; Ordovician; Ores ; Paleozoic; Palladium; Pennsylvanian; Placer; Platinum; Platinum Group Elements; Plutonic; Plutonic Hosted

Publications - SR 55 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

Minerals; Iron; Jade; Jurassic; Kanayut Conglomerate; Kayak Shale; Kuskokwim Group; Lead; Limestone; Lode ; Nickel; Nikolai Greenstone; Noatak Sandstone; Nome Group; Nuggets; Orca Group; Ordovician; Ores ; Paleozoic; Palladium; Pennsylvanian; Placer; Platinum; Platinum Group Elements; Plutonic; Plutonic Hosted

EXTRACTION METHOD FOR SEPARATING URANIUM, PLUTONIUM, AND FISSION PRODUCTS FROM COMPOSITIONS CONTAINING SAME

DOEpatents

Seaborg, G.T.

1957-10-29

Methods for separating plutonium from the fission products present in masses of neutron irradiated uranium are reported. The neutron irradiated uranium is first dissolved in an aqueous solution of nitric acid. The plutonium in this solution is present as plutonous nitrate. The aqueous solution is then agitated with an organic solvent, which is not miscible with water, such as diethyl ether. The ether extracts 90% of the uraryl nitrate leaving, substantially all of the plutonium in the aqueous phase. The aqueous solution of plutonous nitrate is then oxidized to the hexavalent state, and agitated with diethyl ether again. In the ether phase there is then obtained 90% of plutonium as a solution of plutonyl nitrate. The ether solution of plutonyl nitrate is then agitated with water containing a reducing agent such as sulfur dioxide, and the plutonium dissolves in the water and is reduced to the plutonous state. The uranyl nitrate remains in the ether. The plutonous nitrate in the water may be recovered by precipitation.

Tilted middle Tertiary ash-flow calderas and subjacent granitic plutons, southern Stillwater Range, Nevada: cross sections of an Oligocene igneous center

USGS Publications Warehouse

John, D.A.

1995-01-01

Steeply tilted late Oligocene caldera systems in the Stillwater caldera complex record a number of unusual features including extreme thickness of caldera-related deposits, lack of evidence for structural doming of the calderas and preservation of vertical compositional zoning in the plutonic rocks. The Stillwater caldera complex comprises three partly overlapping ash-flow calderas and subjacent plutonic rocks that were steeply tilted during early Miocene extension. The Job Canyon caldera, the oldest (ca. 29-28 Ma) caldera, consists of two structural blocks. The 25 to 23 Ma Poco Canyon and Elevenmile Canyon calderas and underlying Freeman Creek pluton overlap in time and space with each other. Caldera collapse occurred mostly along subvertical ring-fracture faults that penetrated to depths of >5 km and were repeatedly active during eruption of ash-flow tuffs. The calderas collapsed as large piston-like blocks, and there is no evidence for chaotic collapse. Preserved parts of caldera floors are relatively flat surfaces several kilometers across. -from Author

Mineral resource potential map of the Selway-Bitterroot Wilderness, Idaho County, Idaho, and Missoula and Ravalli counties, Montana

USGS Publications Warehouse

Toth, Margo I.; Coxe, Berton W.; Zilka, Nicholas T.; Hamilton, Michael M.

1983-01-01

Mineral resource studies by the U.S. Bureau of Mines and the U.S, Geological Survey indicate that five areas within the Selway-Bitterroot Wilderness have mineral resource potential. Regional studies suggest that three granitic plutons within the wildemess, the Running Creek pluton on the southwestern border of the wildemess, the Painted Rocks pluton on the southern border of the wildemess, and the Whistling Pig pluton in the west-central portion of the wildemess, have low potential for molybdenite deposits, but detailed surface investigations failed to recognize a deposit. Placer deposits in the Elk Summit area on the north side of the wildemess contain subeconomic resources of niobium- (columbium-) bearing ilmenite. A vein on the northeast side of the wildemess at t~e Cliff mine at Saint Joseph Peak contains subeconomic silver-copper-lead resources. The wilderness has no known potential for oil and gas, coal, geothermal resources, or other energy-related commodities.

Automatic twin vessel recrystallizer. Effective purification of acetaminophen by successive automatic recrystallization and absolute determination of purity by DSC.

PubMed

Nara, Osamu

2011-01-24

I describe an interchangeable twin vessel (J, N) automatic glass recrystallizer that eliminates the time-consuming recovery and recycling of crystals for repeated recrystallization. The sample goes in the dissolution vessel J containing a magnetic stir-bar K; J is clamped to the upper joint H of recrystallizer body D. Empty crystallization vessel N is clamped to the lower joint M. Pure solvent is delivered to the dissolution vessel and the crystallization vessel via the head of the condenser A. Crystallization vessel is heated (P). The dissolution reservoir is stirred and heated by the solvent vapor (F). Continuous outflow of filtrate E out of J keeps N at a stable boiling temperature. This results in efficient dissolution, evaporation and separation of pure crystals Q. Pure solvent in the dissolution reservoir is recovered by suction. Empty dissolution and crystallization vessels are detached. Stirrer magnet is transferred to the crystallization vessel and the role of the vessels are then reversed. Evacuating mother liquor out of the upper twin vessel, the apparatus unit is ready for the next automatic recrystallization by refilling twin vessels with pure solvent. We show successive automatic recrystallization of acetaminophen from diethyl ether obtaining acetaminophen of higher melting temperatures than USP and JP reference standards by 8× automatic recrystallization, 96% yield at each stage. Also, I demonstrate a novel approach to the determination of absolute purity by combining the successive automatic recrystallization with differential scanning calorimetry (DSC) measurement requiring no reference standards. This involves the measurement of the criterial melting temperature T(0) corresponding to the 100% pure material and quantitative ΔT in DSC based on the van't Hoff law of melting point depression. The purity of six commercial acetaminophen samples and reference standards and an eight times recrystallized product evaluated were 98.8 mol%, 97.9 mol%, 99.1 mol%, 98.3 mol%, 98.4 mol%, 98.5 mol% and 99.3 mol% respectively. Copyright © 2010 Elsevier B.V. All rights reserved.

The risk of recrystallization: changes to the toxicity and morphology of pyrimethamine.

PubMed

Perold, Zak; Caira, Mino R; Brits, Marius

2014-01-01

Pyrimethamine, an anti-malarial agent known to exhibit solid state polymorphism, may be purified by means of recrystallization. Recrystallization may alter the solid state chemistry of pharmaceuticals, which may impact the toxicity and/or manufacturability thereof. We evaluated the risks associated with the recrystallization of pyrimethamine. Pyrimethamine was recrystallized using several organic solvents. X-ray diffraction, thermal analysis, infra-red spectroscopy, microscopy, flowability -, solubility and dissolution testing as well as computational work were employed to evaluate the recrystallized products. A toxic solvatomorph of pyrimethamine (Pyr-MeOH) was found to be the product from methanol recrystallization. The elucidation of - and the elaboration on the unique characteristics of Pyr-MeOH provides the pharmaceutical industry with several means to identify Pyr-MeOH and to distinguish it from the pharmaceutically preferred anhydrous form (Pyr). Thermal methods of analysis found that the toxicity of Pyr-MeOH may be reversed by overcoming a desolvation activation energy of 148 kJ/mol. In addition it was found that recrystallization altered the morphology of Pyr. Angle of repose and tapped density determinations identified that the different morphologies of Pyr displayed differences in powder flow and compressibility behaviour and In Silico calculations were successful in rendering morphologies resembling that found experimentally. We present a solvatomorph of pyrimethamine and provide several characteristic means to identify this unwanted toxic form and quantified the energy required to overcome its toxicity. In addition we describe that Pyr may present in different morphologies and show how it may impact the manufacturability thereof.

Early Paleozoic dioritic and granitic plutons in the Eastern Tianshan Orogenic Belt, NW China: Constraints on the initiation of a magmatic arc in the southern Central Asian Orogenic Belt

NASA Astrophysics Data System (ADS)

Du, Long; Long, Xiaoping; Yuan, Chao; Zhang, Yunying; Huang, Zongying; Sun, Min; Zhao, Guochun; Xiao, Wenjiao

2018-03-01

Early Paleozoic dioritic and granitic plutons in the Eastern Tianshan Orogenic Belt (ETOB) have been studied in order to constraint the initiation of a magmatic arc formed in this region. Zircon U-Pb dating indicates that two dioritic plutons in the northern ETOB were generated in the Late Ordovician (452 ± 4 Ma) and the Early Silurian (442 ± 3 Ma), respectively. Diorites from the two plutons are characterized by enrichments in large ion lithophile elements (LILE) and highly incompatible elements, with depletions in high field strength elements (HSFE) displaying typical geochemical features of a subduction-related origin. They have positive εNd(t) values (+5.08-+6.58), relatively young Nd model ages (TDM = 0.71-1.08 Ga), with Ta/Yb (0.05-0.09) and Nb/Ta ratios (12.06-15.19) similar to those of depleted mantle, suggesting a juvenile mantle origin. Their high Ba/La (13.3-35.9), low Th/Yb (0.72-2.02), and relatively low Ce/Th (4.57-14.7) and Ba/Th (47.8-235) ratios indicate that these diorites were probably produced by partial melting of a depleted mantle wedge metasomatized by both subducted sediment-derived melts and slab-derived aqueous fluids. Zircon U-Pb dating of a granitic pluton in the northern ETOB yielded a Late Ordovician intrusion age of 447 ± 5 Ma. Granites from this pluton show calc-alkaline compositions with geochemical characteristics of I-type granites. They also show positive εNd(t) values (+6.49-+6.95) and young Nd model ages (TDM = 0.69-0.87 Ga), indicating that the granites were most likely derived from juvenile lower crust. Our new dating results on the dioritic and granitic plutons suggest that arc-type magmatism in the northern ETOB began prior to or at the Late Ordovician (452-442 Ma). In addition, north-dipping subduction of the Kangguertage oceanic lithosphere may account for the arc-type magmatism and the geodynamic process of the ETOB in the Early Paleozoic.

Analysis of Particle-Stimulated Nucleation (PSN)-Dominated Recrystallization for Hot-Rolled 7050 Aluminum Alloy

NASA Astrophysics Data System (ADS)

Adam, Khaled F.; Long, Zhengdong; Field, David P.

2017-04-01

In 7xxx series aluminum alloys, the constituent large and small second-phase particles present during deformation process. The fraction and spatial distribution of these second-phase particles significantly influence the recrystallized structure, kinetics, and texture in the subsequent treatment. In the present work, the Monte Carlo Potts model was used to model particle-stimulated nucleation (PSN)-dominated recrystallization and grain growth in high-strength aluminum alloy 7050. The driving force for recrystallization is deformation-induced stored energy, which is also strongly affected by the coarse particle distribution. The actual microstructure and particle distribution of hot-rolled plate were used as an initial point for modeling of recrystallization during the subsequent solution heat treatment. Measurements from bright-field TEM images were performed to enhance qualitative interpretations of the developed microstructure. The influence of texture inhomogeneity has been demonstrated from a theoretical point of view using pole figures. Additionally, in situ annealing measurements in SEM were performed to track the orientational and microstructural changes and to provide experimental support for the recrystallization mechanism of PSN in AA7050.

Facile synthesis of hollow zeolite microspheres through dissolution–recrystallization procedure in the presence of organosilanes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tao, Haixiang; Ren, Jiawen; Liu, Xiaohui

2013-04-15

Hollow zeolite microspheres have been hydrothermally synthesized in the presence of organosilanes via a dissolution–recrystallization procedure. In the presence of organosilanes, zeolite particles with a core/shell structure formed at the first stage of hydrothermal treatment, then the core was consumed and recrystallized into zeolite framework to form the hollow structure during the second hydrothermal process. The influence of organosilanes was discussed, and a related dissolution–recrystallization mechanism was proposed. In addition, the hollow zeolite microspheres exhibited an obvious advantage in catalytic reactions compared to conventional ZSM-5 catalysts, such as in the alkylation of toluene with benzyl chloride. - Graphical abstract: Hollowmore » zeolite spheres with aggregated zeolite nanocrystals were synthesized via a dissolution–recrystallization procedure in the presence of organosiline. Highlights: ► Hollow zeolite spheres with aggregated zeolite nanocrystals were synthesized via a dissolution–recrystallization procedure. ► Organosilane influences both the morphology and hollow structure of zeolite spheres. ► Hollow zeolite spheres showed an excellent catalytic performance in alkylation of toluene with benzyl chloride.« less

Lead isotope systematics of some igneous rocks from the Egyptian Shield

NASA Technical Reports Server (NTRS)

Gillespie, J. G.; Dixon, T. H.

1983-01-01

Lead isotope data on whole-rock samples and two feldspar separates for a variety of Pan-African (late Precambrian) igneous rocks for the Egyptian Shield are presented. It is pointed out that the eastern desert of Egypt is a Late Precambrian shield characterized by the widespread occurrence of granitic plutons. The lead isotope ratios may be used to delineate boundaries between Late Precambrian oceanic and continental environments in northeastern Africa. The samples belong to three groups. These groups are related to a younger plutonic sequence of granites and adamellites, a plutonic group consisting of older tonalites to granodiorites, and the Dokhan volcanic suite.

Bullialdus - Strengthening the case for lunar plutons

NASA Technical Reports Server (NTRS)

Pieters, Carle M.

1991-01-01

Although many craters expose materials of a composition different from that of the local surroundings, Bullialdus has excavated material representing three distinct stratigraphic zones that occur in the upper 6 km of crust, the top two of which are gabbroic and the deepest of which is noritic. This three-component stratigraphy at Bullialdus provides strong evidence that the lunar crust includes pockets of compositionally layered material reminiscent of mafic layered plutons. When combined with previous information on the compositional diversity at other large craters, these remote analyses obtained in a geologic context substantially strengthen the hypothesis suggested from lunar samples that plutons play an integral role in lunar crustal evolution.

Effect of Prestraining of Recrystallization Temperature and Mechanical Properties of Commercial, Sintered, Wrought Molybdenum

NASA Technical Reports Server (NTRS)

Dike, Kenneth C; Long, Roger A

1953-01-01

Given three presumably identical lots of commercial, sintered, wrought molybdenum, the 1-hour recrystallization temperature of one lot remained above 2900 F by limiting the amount of effective restraining to 35 percent or less. Different recrystallization temperatures were obtained in various atmospheres, the highest in argon and the lowest in hydrogen. Metal thus fabricated and then stress-relieved possessed an ultimate tensile strength at room temperature within 10 percent of metal swaged 99 percent and also possessed equivalent ductility. At 1800 F, equivalent strength and ductility was obtained irrespective of the amount of swaging over the range of 10 to 99 percent. The amount of swaging greatly influenced the recrystallized grain size but the difference in grain size is not the major controlling factor which determines whether recrystallized molybdenum is ductile or brittle at room temperature.

Optimum rolling ratio for obtaining {001}<110> recrystallization texture in Ti-Nb-Al biomedical shape memory alloy.

PubMed

Inamura, T; Shimizu, R; Kim, H Y; Miyazaki, S; Hosoda, H

2016-04-01

The rolling rate (r) dependence of textures was investigated in the Ti-26Nb-3Al (mol%) alloy to reveal the conditions required to form the {001}<110> recrystallization texture, which is a desirable orientation for the β-titanium shape memory alloy. {001}<110> was the dominant cold-rolling texture when r=90% and it was transferred to the recrystallization texture without forming {112}<110>, which is detrimental for the isotropic mechanical properties of the rolled sheet. A further increase in r resulted in the formation of {112}<110> in both rolling and recrystallization textures. Therefore, r should be controlled to form only the {001}<110> rolling texture, because the {112}<110> texture can overwhelm the {001}<110> texture during recrystallization. Copyright © 2016 Elsevier B.V. All rights reserved.

Geochemical constraints on the link between volcanism and plutonism at the Yunshan caldera complex, SE China

NASA Astrophysics Data System (ADS)

Yan, Lili; He, Zhenyu; Beier, Christoph; Klemd, Reiner

2018-01-01

The Yunshan caldera complex is part of a larger scale, ca. 2000-km-long volcanic-plutonic complex belt in the coastal region of SE China. The volcanic rocks in the caldera complex are characterized by high-silica peraluminous and peralkaline rhyolites associated with an intracaldera porphyritic quartz monzonite pluton. In this study, we present zircon U-Pb, Hf and stable O isotopes along with geochemical data of both volcanic and plutonic rocks to evaluate the potential petrogenetic link between volcanism and plutonism in the Yunshan caldera complex. SHRIMP zircon U-Pb geochronology of both volcanic and plutonic rocks yields almost identical ages ranging from 95.6 to 93.1 Ma. The peraluminous and peralkaline rhyolites show negative anomalies of Sr, P, Ti and Ba and to a lesser extent negative Nb and Ta anomalies, along with positive Rb anomalies and `seagull-like' rare earth element (REE) patterns with negative Eu anomalies and low (La/Yb)N ratios. The intracaldera porphyritic quartz monzonite displays minor negative Rb, Nb, Ta, Sr, P and Ti anomalies and a positive Ba anomaly with REE patterns characterized by relatively high (La/Yb)N ratios and lack significant Eu anomalies. The peraluminous and peralkaline rhyolites and the porphyritic quartz monzonite exhibit consistent ɛ Nd( t) of - 3.7 to - 2.2 and display zircon ɛ Hf( t) values of - 2.1 to 3.7. They further have similar, mantle-like, zircon oxygen isotopic compositions (δ18OVSMOW mainly = 4.63 to 5.76‰). We interpret these observations to be in agreement with a crystal mush model in which the parental magma of the volcanic and plutonic rocks of the Yunshan caldera complex was likely produced by interaction of asthenosphere melts with subduction-influenced enriched mantle wedge. The peralkaline rhyolites are interpreted to represent the most differentiated magma that has subsequently experienced significant fluid-melt interactions, whereas the porphyritic quartz monzonite may be representative of the residual crystal mush. The Yunshan rhyolites typically match the geochemical characteristics of `hot-dry-reduced' rhyolites indicating that, during the late Cretaceous, the tectonic setting of SE China changed from a compressional environment to an extensional environment, i.e., from an arc into a back-arc setting. Our results imply that volcanic and plutonic rocks in caldera systems may provide unique constraints on the evolution of the magmatic system in which both the erupting melt and the residual crystalline material are being preserved.

U-Pb Geochronology of Grandite Skarn Garnet: Case Studies From Jurassic Skarns of California

NASA Astrophysics Data System (ADS)

Gevedon, M. L.; Seman, S.; Barnes, J.; Stockli, D. F.; Lackey, J. S.

2016-12-01

We present 3 case studies using a new method for U-Pb dating grossular-andradite (grandite) skarn garnet via LA-ICP-MS (Seman et al., in prep). Grandite is commonly rich in U, with high Fe3+ contents generally correlating with higher U concentrations. Micron-scale non-radiogenic Pb heterogeneities allow for regression of age data using Tera-Wasserberg concordia. Although others have dated accessory skarn minerals, garnet U-Pb ages are powerful because garnet grows early and is nearly ubiquitous in skarns, resists alteration, and provides a formation age independent of that of the causative pluton. The Darwin stock (Argus range, eastern CA) was likely a short-lived, single pulse of magmatism, genetically related to the Darwin skarn. A robust skarn garnet U-Pb age of 176.8 ± 1.3 Ma agrees well with the pluton U-Pb zircon age of 175 Ma (Chen and Moore, 1982). Furthermore, zircon separated from, and in textural equilibrium with, exoskarn garnetite yields a U-Pb age of 176.8 ± 1 Ma. Such agreement between plutonic and skarn zircon ages with a skarn garnet age in a geologically simple field area is the ideal scenario for establishing grandite U-Pb as a viable tool for directly dating skarns. The Black Rock skarn (BRS; eastern CA) is more complex: multiple plutons and ambiguous field relations complicate determination of a causative pluton. A skarn garnet U-Pb age of 172.0 ± 3 Ma confirms a middle Jurassic BRS formation age. Investigation of 4 local plutons yield zircon U-Pb ages of 222 ± 3 Ma, 213 ± 4 Ma, 207 ± 4 Ma and 176.2 ± 2 Ma. Comparison of the skarn garnet U-Pb and pluton ages suggest the BRS is genetically related to the youngest pluton, providing basis for further field and geochemical investigation. The Whitehorse skarn (WS; Mojave Desert, CA) lies in an important region for studying the changing tectono-magmatic regime of the Jurassic North American Cordillera; basin fill suggests a tectonically-controlled oscillating regional shoreline (Busby, 2012). Values of δ18O of WS garnet are strongly negative, —9.8‰ to 1.2‰, and can only be the result of access to meteoric water. A grandite U-Pb age of 162.3 ± 2 Ma requires the region of the WS not be submerged below the sea at this time. Future work coupling grandite U-Pb and δ18O may be vital in establishing the timing of Jurassic Cordilleran tectonic changes in the Mojave Desert.

Petrogenesis of Luchuba and Wuchaba granitoids in western Qinling: geochronological and geochemical evidence

NASA Astrophysics Data System (ADS)

Kong, Juanjuan; Niu, Yaoling; Duan, Meng; Zhang, Yu; Hu, Yan; Li, Jiyong; Chen, Shuo

2017-12-01

The West Qinling Orogenic Belt (WQOB) is a major portion of the Qinling-Dabie-Sulu Orogen and holds essential information for understanding the prolonged evolution of the northeastern branch of the Paleo-Tethys in East Asia. This study focuses on the petrogenesis of granitoids from Luchuba and Wuchaba plutons in the WQOB. We obtained zircon U-Pb ages of 211 ± 1.4 Ma for the Luchuba pluton and 218.7 ± 1.3 Ma for the Wuchaba pluton, which are the same as the proposed timing of continental collision at ˜220 Ma. We thus interpret the granitoids to represent a magmatic response to the collision between the North China Craton (NCC) and the Yangtze Block (YB). The two plutons are metaluminous to weakly peraluminous I-type granitoids. Samples from the two plutons show strong light rare earth element (REEs) enrichment and weak heavy REE depletion, with varying negative Eu anomalies, which is most consistent with significant plagioclase fractionation although the possible effect of plagioclase as residual phase in the magma source region cannot be ruled out. In primitive mantle normalized multi-element variation diagrams, nearly all the samples show negative Nb, Ta, P and Ti anomalies and relative enrichment in Rb, Pb, U and K. These characteristics resemble those of the average continental crust. The Luchuba pluton has lower (87Sr/86Sr)i (0.7051 to 0.7104), higher ɛNd(t) (-8.11 to -5.73) and ɛHf(t) (-6.70 to -1.65) than mature continental crust ([87Sr/86Sr] i > 0.72, ɛNd(t) < -12). The Wuchaba pluton also has lower (87Sr/86Sr)i (0.7069 to 0.7080), higher ɛNd(t) (-9.86 to -3.34) and ɛHf(t) (-5.69 to 1.58) than mature continental crust. We conclude that the Luchuba and Wuchaba granitoids in the WQOB are best explained as resulting from fractional crystallization with crustal assimilation of parental magmas derived from melting of Mianlue oceanic crust under amphibolite facies conditions during the initial stage of continental collision between the North China Craton and the Yangtze Block. Mafic magmatic enclaves (MMEs) of Wuchaba pluton are earlier cumulates of the same magmatic system. The Mianlue oceanic crust (MORB-like) contributes to the source of the Luchuba and Wuchaba granitoids, pointing to the significance of melting of oceanic crust for continental crust accretion.

Isotopic and trace element variations in the Ruby Batholith, Alaska, and the nature of the deep crust beneath the Ruby and Angayucham Terranes

USGS Publications Warehouse

Arth, Joseph G.; Zmuda, Clara C.; Foley, Nora K.; Criss, Robert E.; Patton, W.W.; Miller, T.P.

1989-01-01

Thirty-six samples from plutons of the Ruby batholith of central Alaska were collected and analyzed for 22 trace elements, and many were analyzed for the isotopic compositions of Sr, Nd, O, and Pb in order to delimit the processes that produced the diversity of granodioritic to granitic compositions, to deduce the nature of the source of magmas at about 110 Ma, and to characterize the deep crust beneath the Ruby and Angayucham terranes. Plutons of the batholith show a substantial range in initial 87Sr/86Sr (SIR) of 0.7055–0.7235 and a general decrease from southwest to northeast. Initial 143Nd/144Nd (NIR) have a range of 0.51150–0.51232 and generally increase from southwest to northeast. The δ18O values for most whole rocks have a range of +8.4 to +11.8 and an average of +10.3‰. Rb, Cs, U, and Th show large ranges of concentration, generally increase as SiO2 increases, and are higher in southwest than in northeast plutons. Sr, Ba, Zr, Hf, Ta, Sc, Cr, Co, and Zr show large ranges of concentration and generally decrease as SiO2 increases. Rare earth elements (REE) show fractionated patterns and negative Eu anomalies. REE concentrations and anomalies are larger in the southwest than in the northeast plutons. Uniformity of SIR and NIR in Sithylemenkat and Jim River plutons suggests a strong role for fractional crystallization or melting of uniform magma sources at depth. Isotopic variability in Melozitna, Ray Mountains, Hot Springs, and Kanuti plutons suggests complex magmatic processes such as magma mixing and assimilation, probably combined with fractional crystallization, or melting of a complex source at depth. The large variations in SIR and NIR in the batholith require a variation in source materials at depth. The southwestern plutons probably had dominantly siliceous sources composed of metamorphosed Proterozoic and Paleozoic upper crustal rocks. The northeastern plutons probably had Paleozoic sources that were mixtures of siliceous and intermediate to mafic crustal rocks. The inferred sources could well have been the higher-metamorphic-grade lithologic equivalents of the exposed Proterozoic(?) to Paleozoic schists, orthogneisses, and metavolcanic rocks of Ruby terrane, the silicic portions of which are quite radiogenic. The deeper crustal sources that gave rise to most of the batholithic magmas are inferred to be similar under both the Ruby metamorphic terrane and the Angayucham ophiolitic terrane.

Pluton emplacement within an extensional transfer zone during dextral strike-slip faulting: an example from the late Archaean Abitibi Greenstone Belt

NASA Astrophysics Data System (ADS)

Lacroix, S.; Sawyer, E. W.; Chown, E. H.

1998-01-01

The Lake Abitibi area within the late Archaean Abitibi Greenstone Belt exhibits an interlinked plutonic, structural and metamorphic evolution that may characterize segmented strike-slip faults at upper-to-mid-crustal levels. Along the major, southeastward propagating Macamic D2 dextral strike-slip fault, Theological and preexisting D1 structural heterogeneities induced the development of NNW-trending dextral-oblique splays which evolved into an extensional trailing fan and created an extensional, NNW-dipping stepover. Magma flowing upwards from deeper parts of the Macamic Fault spread towards the southeast at upper crustal levels along both the oblique-slip and extensional D2 splays, and built several plutons in a pull-apart domain between 2696 and 2690 Ma. Different emplacement and material transfer mechanisms operated simultaneously in different parts of the system, including fault dilation and wedging, lateral expansion, wall-rock ductile flow and stoping. Transfer of movement between D2 splays occurred under ductile conditions during syn-emplacement, amphibolite-grade metamorphism (500-700 °C). During cooling (< 2690 Ma), narrower brittle-ductile zones of greenschist-grade shearing were concentrated along the pluton-wall rock contacts, but the extensional stepover locked since both normal and reverse movements occurred along NNW-dipping faults. Pluton emplacement, contact metamorphism and propagation of D2 faults appear to have been closely linked during the Superior Province-wide late transpressional event.

K-feldspar megacryst accumulations formed by mechanical instabilities in magma chamber margins, Asha pluton, NW Argentina

NASA Astrophysics Data System (ADS)

Rocher, Sebastián; Alasino, Pablo H.; Grande, Marcos Macchioli; Larrovere, Mariano A.; Paterson, Scott R.

2018-07-01

The Asha pluton, the oldest unit of the San Blas intrusive complex (Early Carboniferous), exhibits impressive examples of magmatic structures formed by accumulation of K-feldspar megacrysts, enclaves, and schlieren. Almost all recognized structures are meter-scale, vertically elongate bodies of variable shapes defined as fingers, trails, drips, and blobs. They preferentially developed near the external margin of the Asha pluton and generally are superimposed by chamber-wide magmatic fabrics. They mostly have circular or sub-circular transverse sections with an internal fabric defined by margin-parallel, inward-dipping concentric foliation and steeply plunging lineation at upper parts and flat foliation at lower parts. The concentration of megacrysts usually grades from upper sections, where they appear in a proportion similar to the host granite, to highly packed accumulations of K-feldspar along with grouped flattened enclaves at lower ends. These features suggest an origin by downward localized multiphase magmatic flow, narrowing and 'log jamming', and gravitational sinking of grouped crystals and enclaves, with compaction and filter pressing as main mechanisms of melt removal. Crystal size distribution analysis supports field observations arguing for a mechanical origin of accumulations. The magmatic structures of the Asha pluton represent mechanical instabilities generated by thermal and compositional convection, probably owing to cooling and crystallization near the pluton margins during early stages of construction of the intrusive complex.

The Phillips pluton, Maine, USA: evidence of heterogeneous crustal sources and implications for granite ascent and emplacement mechanisms in convergent orogens

NASA Astrophysics Data System (ADS)

Pressley, Rachel A.; Brown, Michael

1999-03-01

The Phillips pluton (age of 403.8±1.3 Ma) was assembled at a crustal level below the contemporary brittle-plastic transition during regional dextral-reverse transpressive deformation. The pluton is composed dominantly of medium- to coarse-grained leucogranite sensu lato (s.l.), but within its bounds includes decametric massive outcrop of fine- to medium-grained granodiorite (s.l.). In places, the leucogranite contains centimetric enclaves apparently of the granodiorite. Granodiorite is host to more biotite than muscovite, and more calcic, oscillatory-zoned plagioclase, compared to the leucogranite. Pegmatitic granite and composite pegmatite-aplite occur as metric sheets within the pluton and as larger bodies outside the pluton to the SW. Magmatic fabrics, defined by biotite schlieren, occur locally in the leucogranite; the attitude of these fabrics and layering within the leucogranite are concordant with the NE-striking, steeply-dipping country rock foliation. K 2O contents, Rb/Sr ratios, Rb, Sr and Ba covariations, and chondrite-normalized rare earth element (REE) patterns of leucogranite are consistent with high-to-moderate a(H 2O) muscovite dehydration equilibrium eutectic melting of a predominantly pelite source similar to metasedimentary rocks of the surrounding central Maine belt (CMB). The REE patterns and Rb/Sr ratios of granodiorite also suggest derivation from a metasedimentary source, but more likely by moderate-to-low a(H 2O) (muscovite-) biotite dehydration equilibrium eutectic to non-eutectic (minimum) melting of a protolith dominated by greywacke in which garnet and plagioclase were residual phases. Both granite (s.l.) types have heterogeneous initial Nd isotope compositions. Samples of granodiorite define a range in ɛNd (404 Ma) of -1.8 to +0.1 (±0.3 2 σ uncertainty), and samples of leucogranite define a range in ɛNd (404 Ma) of -8.0 to -5.3 (±0.3 2 σ uncertainty). This bimodal distribution suggests that melts were derived from a minimum of two sources. The data are consistent with these sources being CMB metasedimentary rocks ( ɛNd (404 Ma)<-4) for the leucogranite, and Avalon-like (peri-Gondwanan) metasedimentary crust ( ɛNd (404 Ma)>-4) for the granodiorite. The range of Nd isotope compositions within each granite type most likely reflects isotopic heterogeneity inherited from the source. These data imply that the integrity of individual melt batches was maintained during ascent, and that extensive mixing of melt batches during emplacement at this level in the pluton did not occur, although centimetric enclaves have intermediate Nd isotope compositions consistent with small-scale interactions between magmas. We infer that the Phillips pluton represents the root of a larger pluton, and that what remains of this larger pluton is the feeder constructed from multiple melt batches arrested during waning flow of granite magma through a crustal-scale shear zone system.

Effect of starting microstructure on helium plasma-materials interaction in tungsten

DOE PAGES

Wang, Kun; Bannister, Mark E.; Meyer, Fred W.; ...

2016-11-24

Here, in a magnetic fusion energy (MFE) device, the plasma-facing materials (PFMs) will be subjected to tremendous fluxes of ions, heat, and neutrons. The response of PFMs to the fusion environment is still not well defined. Tungsten metal is the present candidate of choice for PFM applications such as the divertor in ITER. However, tungsten's microstructure will evolve in service, possibly to include recrystallization. How tungsten's response to plasma exposure evolves with changes in microstructure is presently unknown. In this work, we have exposed hot-worked and recrystallized tungsten to an 80 eV helium ion beam at a temperature of 900more » °C to fluences of 2 × 10 23 or 20 × 10 23 He/m 2. This resulted in a faceted surface structure at the lower fluence or short but well-developed nanofuzz structure at the higher fluence. There was little difference in the hot-rolled or recrystallized material's near-surface (≤50 nm) bubbles at either fluence. At higher fluence and deeper depth, the bubble populations of the hot-rolled and recrystallized were different, the recrystallized being larger and deeper. This may explain previous high-fluence results showing pronounced differences in recrystallized material. The deeper penetration in recrystallized material also implies that grain boundaries are traps, rather than high-diffusivity paths.« less

Effect of strain on evolution of dynamic recrystallization in Nb-1 wt%Zr-0.1 wt%C alloy at 1500 and 1600 °C

DOE Office of Scientific and Technical Information (OSTI.GOV)

Behera, A.N.

Uniaxial compression tests were carried out on Nb-1 wt%Zr-0.1 wt%C alloy at temperature of 1500 and 1600 °C and strain rate of 0.1 s{sup −1} to study the evolution of dynamic recrystallization with strain. Electron back scatter diffraction was used to quantify the microstructural evolution. Nb-1Zr-0.1C alloy showed a necklace structure at a strain of 0.9 when deformed at 1500 °C and at strain of 0.6 when deformed at 1600 °C, both at strain rate of 0.1 s{sup −1}. This suggested the occurrence of dynamic recrystallization. At 1500 °C and strain of 0.9 the local average misorientation and the grainmore » orientation spread was low confirming the presence of dynamic recrystallization at this deformation condition. At both 1500 and 1600 °C and all measured strains the recrystallized grains had a strong fiber component of <001>. - Highlights: • Necklace formation of dynamically recrystallized grains occurred at strain of 0.6 and 0.9 for 1500 and 1600 °C, respectively. • Equiaxed microstructures were seen with increase in strain for both 1500 and 1600 °C. • At large strains the predominant recrystallized texture evolved to <001> pole.« less

Friction Stir Back Extrusion of Aluminium Alloys for Automotive Applications

NASA Astrophysics Data System (ADS)

Xu, Zeren

Since the invention of Friction Stir Welding in 1991 as a solid state joining technique, extensive scientific investigations have been carried out to understand fundamental aspects of material behaviors when processed by this technique, in order to optimize processing conditions as well as mechanical properties of the welds. Based on the basic principles of Friction Stir Welding, several derivatives have also been developed such as Friction Stir Processing, Friction Extrusion and Friction Stir Back Extrusion. Friction Stir Back Extrusion is a novel technique that is proposed recently and designed for fabricating tubes from lightweight alloys. Some preliminary results have been reported regarding microstructure and mechanical properties of Friction Stir Back Extrusion processed AZ31 magnesium alloy, however, systematic study and in-depth investigations are still needed to understand the materials behaviors and underlying mechanisms when subjected to Friction Stir Back Extrusion, especially for age-hardenable Al alloys. In the present study, Friction Stir Back Extrusion processed AA6063-T5 and AA7075-T6 alloys are analyzed with respect to grain structure evolution, micro-texture change, recrystallization mechanisms, precipitation sequence as well as mechanical properties. Optical Microscopy, Electron Backscatter Diffraction, Transmission Electron Microscopy, Vickers Hardness measurements and uniaxial tensile tests are carried out to characterize the microstructural change as well as micro and macro mechanical properties of the processed tubes. Special attention is paid to the micro-texture evolution across the entire tube and dynamic recrystallization mechanisms that are responsible for grain refinement. Significant grain refinement has been observed near the processing zone while the tube wall is characterized by inhomogeneous grain structure across the thickness for both alloys. Dissolution of existing precipitates is noticed under the thermal hysterias imposed by Friction Stir Back Extrusion process, resulting in decreased strength but improved elongation of the processed tubes; a post-process aging step can effectively restore the mechanical properties of the processed tubes by allowing for the reprecipitation of solute elements in the form of fine, dispersed precipitates. Texture analysis performed for AA6063 alloy suggests the dominance of simple shear type textures with clear transition from initial texture to stable B/ ?B components via intermediate types that are stable under moderate strain levels. In order to identify the texture components properly, rigid body rotations are applied to the existing coordinate system to align it to local shear reference frame. Surprisingly, for AA7075 tubes, and fibers are observed to be the dominant texture components in the transition region as well as thermomechanically affected zone while the processing zone is characterized by random texture. The underlying mechanisms responsible for the formation of random texture are discussed in Chapter 5 based on Electron Backscatter Diffraction analysis. Comparative discussions are also carried out for the recrystallization mechanisms that are responsible for grain structure evolution of both alloys. Continuous grain subdivision and reorientation is cited as the dominant mechanism for the recrystallization of AA6063 alloys, while dynamic recrystallization occurs mainly in the form of Geometric Dynamic Recrystallization and progressive subgrain rotations near grain boundaries in AA7075 alloys.

Publications - PDF 99-24A | Alaska Division of Geological & Geophysical

Science.gov Websites

Alaska's Mineral Industry Reports AKGeology.info Rare Earth Elements WebGeochem Engineering Geology Alaska Alaska, scale 1:63,360 (6.9 M) Keywords Ar-Ar; Bedrock; Bedrock Geology; Generalized; Geologic; Geologic Map; Geology; Gold; Lode; Non-Metals; Paleontology; Plutonic; Plutonic Hosted; STATEMAP Project

Small-Volume U-Pb Zircon Geochronology by Laser Ablation-Multicollector-ICP-MS

DTIC Science & Technology

2008-11-03

Ecstall pluton in the Coast Mountains of British Columbia: Evidence for local deformation rather than large-scale transport. Journal of Geophysical...Journal of Metamorphic Geology 18, 719–735. Kalsbeek, F., Jepsen, H.F., Nutman, A.P., 2001. From source migmatites to plutons : tracking the origin of

Study of Improved Aluminum Materials for Vehicular Armor

DTIC Science & Technology

1977-04-07

and along cell walls. Dislocations generated during deformation cf the 17 -------------- recrystallized structure interacted with the grain...unrecrystallized (HR) 7475 plate containing dislocations within subgrains and along cell walls. Hot rolling the recrystallized structure at 750OF produced...a structure after solution heat treatment that consisted of elongated recrystallized grains containing polygonized cells . This structure developed

Remarkable isotopic and trace element trends in potassic through sodic Cretaceous plutons of the Yukon-Koyukuk Basin, Alaska, and the nature of the lithosphere beneath the Koyukuk terrane

USGS Publications Warehouse

Arth, Joseph G.; Criss, Robert E.; Zmuda, Clara C.; Foley, Nora K.; Patton, W.W.; Miller, T.P.

1989-01-01

During the period from 110 to 80 m.y. ago, a 450-km-long magmatic belt was active along the northern margin of Yukon-Koyukuk basin and on eastern Seward Peninsula. The plutons intruded Upper Jurassic(?) and Lower Cretaceous volcanic arc rocks and Cretaceous sedimentary rocks in Yukon-Koyukuk basin and Proterozoic and lower Paleozoic continental rocks in Seward Peninsula. Within Yukon-Koyukuk basin, the plutons vary in composition from calc-alkalic plutons on the east to potassic and ultrapotassic alkalic plutons on the west. Plutons within Yukon-Koyukuk basin were analyzed for trace element and isotopic compositions in order to discern their origin and the nature of the underling lithosphere. Farthest to the east, the calc-alkalic rocks of Indian Mountain pluton are largely tonalite and sodic granodiorite, and have low Rb (average 82 ppm), high Sr (>600 ppm), high chondrite-normalized (cn) Ce/Yb (16–37), low δ18O (+6.5 to +7.1), low initial 87Sr/86Sr (SIR) (0.704), and high initial 143Nd/144Nd (NIR) (0.5126). These rocks resemble those modelled elsewhere as partial melts and subsequent fractionates of basaltic or gabbroic metaigneous rocks, and may be products of melting in the deeper parts of the Late Jurassic(?) and Early Cretaceous volcanic arc. Farthest to the west, the two ultrapotassic bodies of Selawik and Inland Lake are high in Cs (up to 93 ppm), Rb (up to 997 ppm), Sr, Ba, Th, and light rare earth elements, have high (Ce/Yb)cn (30, 27), moderate to low δ18O (+8.4, +6.9), high SIR (0.712, 0.710), and moderate NIR (0.5121–0.5122). These rocks resemble rocks of Australia and elsewhere that were modelled as melts of continental mantle that had been previously enriched in large cations. This mantle may be Paleozoic or older. The farthest west alkalic pluton of Selawik Hills is largely monzonite, quartz monzonite, and granite; has moderate Rb (average 284 ppm), high Sr (>600 ppm), high (Ce/Yb)cn (15–25), moderate δ18O (+8.3 to +8.6), high SIR (0.708–0.712), and moderate NIR (0.5121–0.5122). These rocks may be the product of interaction of magma derived from old continental mantle and magma derived from old continental crust. Plutons between eastern and western extremes show completely gradational variations in the concentration of K and Rb and in the isotopic compositions of Sr, Nd, and O. These plutons probably originated either by melting in a mixed source composed of a Paleozoic or older continental section (mantle + crust) overlain by Mesozoic mafic arc rocks, or by mixing of ultrapotassic to potassic magmas from continental sources (mantle + crust), and tonalitic magmas from arc sources. We infer from these results that the northwest portion of Yukon-Koyukuk basin is underlain by a substantial continental basement of Paleozoic or greater age. This basement probably thins out to the east. There is no geochemical evidence for continental basement east of about longitude 157°, or along a belt of at least 50 km width flanking Ruby Geanticline as far to the southwest as about longitude 161°. These areas are probably underlain by oceanic and Mesozoic arc rocks.

Orogen-scale along-strike continuity in quartz recrystallization microstructures adjacent to the Main Central Thrust: implications for deformation temperatures, strain rates and flow stresses

NASA Astrophysics Data System (ADS)

Law, Richard

2015-04-01

Traced for ~ 1500 km along the foreland edge of the Himalaya from NW India to Bhutan published reports indicate a remarkable along-strike continuity of quartz recrystallization microstructures in the footwall and hanging wall to the Main Central Thrust (MCT). Recrystallization in Lesser Himalayan Series (LHS) rocks in the footwall to the MCT is dominated by grain boundary bulging (BLG) microstructures, while recrystallization in Greater Himalayan Series (GHS) rocks in the hanging wall is dominated by grain boundary migration microstructures that traced structurally upwards transition in to the anatectic core of the GHS. In foreland-positioned high-strain rocks adjacent to the MCT recrystallization is dominated by subgrain rotation (SGR) with transitional BLG-SGR and SGR-GBM microstructures being recorded at structural distances of up to a few hundred meters below and above the MCT, respectively. Correlation with available information on temperatures of metamorphism indicated by mineral phase equilibria and RSCM data suggests that recrystallization in the structural zones dominated by BLG, SGR and GBM occurred at temperatures of ~ 350-450, 450-550 and 550- > 650 °C, respectively. It should be kept in mind, however, that these temperatures are likely to be 'close-to-peak' temperatures of metamorphism, whereas penetrative shearing and recrystallization may have continued during cooling. The dominance of SGR along the more foreland-positioned exposures of the MCT intuitively suggests that shearing occurred under a relatively restricted range of deformation temperatures and strain rates. Plotting the 'close-to-peak' 450-500 °C temperatures of metamorphism indicated for SGR-dominated rocks located at up to a few hundred meters below/above the MCT on the quartz recrystallization map developed by Stipp et al. (2002) indicates 'ball-park' strain rates of ~ 10-13 to 10-10 sec-1. However, only strain rates slower than 10-12 sec-1 on the MCT are likely to be compatible with know convergence rates between the Indian and Asian plates. If shearing continued during retrograde cooling while remaining in the SGR field, then the recrystallization map suggests that a significant drop in deformation temperature (> ~75-100 °C) would result in a decrease in strain rate. In general, however, the presence of a single recrystallization microstructure traced over a large (regional scale) distance does not necessarily mean that deformation temperature (or strain rate) remains constant but could, for example, indicate that spatial variations in deformation temperature are compensated for by changes in strain rate, with grain-scale deformation remaining within a particular recrystallization regime. Constant stress conditions plot along a straight line in the 1/T versus log strain rate space used in the quartz recrystallization mechanism map. This suggests that the observed along-strike consistency of SGR-dominated recrystallization microstructures may indicate near to constant stress boundary conditions (albeit with varying temperatures and strain rates) prevailing along what are now the more foreland-positioned exposures of the MCT. Extrapolation of the Hirth et al. (2001) flow law suggests a flow stress of ~ 30-50 MPa based on the deformation temperatures and strain rates inferred for foreland-positioned exposures of the MCT, in agreement with flow stresses estimated from recrystallized quartz grain size data.

Reinforcement of the Cube texture during recrystallization of a 1050 aluminum alloy partially recrystallized and 10% cold-rolled

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang Wei; Helbert, Anne-Laure, E-mail: anne-laure.helbert@u-psud.fr; Baudin, Thierry

In high purity Aluminum, very strong {l_brace}100{r_brace}<001> recrystallization texture is developed after 98% cold rolling and annealing at 500 Degree-Sign C. On the contrary, in Aluminum alloys of commercial purity, the Cube component hardly exceeds 30% after complete recrystallization. Parameters controlling Cube orientation development are mainly the solute dragging due to impurities in solid solution and the stored deformation energy. In the present study, besides the 85% cold rolling, two extra annealings and a slight cold rolling are introduced in the processing route to increase the Cube volume fraction. The Cube development was analyzed by X-ray diffraction and Electron BackScatteredmore » Diffraction (EBSD). The nucleation and growth mechanisms responsible for the large Cube growth were investigated using FEG/EBSD in-situ heating experiments. Continuous recrystallization was observed in Cube oriented grains and competed with SIBM (Strain Induced Boundary Migration) mechanism. This latter was favored by the stored energy gap introduced during the additional cold-rolling between the Cube grains and their neighbors. Finally, a Cube volume fraction of 65% was reached after final recrystallization. - Highlights: Black-Right-Pointing-Pointer EBSD in-situ heating experiments of aluminum alloy of commercial purity. Black-Right-Pointing-Pointer A 10% cold-rolling after a partial recrystallization improved Cube nucleation and growth. Black-Right-Pointing-Pointer Annealing before cold-rolling limited the solute drag effect and permitted a large Cube growth. Black-Right-Pointing-Pointer Cube development is enhanced by continuous recrystallization of Cube sub-grains. Black-Right-Pointing-Pointer The preferential Cube growth occurs by SIBM of small Cube grains.« less

Combined Effect of Heating Rate and Microalloying Elements on Recrystallization During Annealing of Dual-Phase Steels

NASA Astrophysics Data System (ADS)

Bellavoine, Marion; Dumont, Myriam; Drillet, Josée; Hébert, Véronique; Maugis, Philippe

2018-05-01

Adjusting ferrite recrystallization kinetics during annealing is a way to control the final microstructure and thus the mechanical properties of advanced cold-rolled high-strength steels. Two strategies are commonly used for this purpose: adjusting heating rates and/or adding microalloying elements. The present work investigates the effect of heating rate and microalloying elements Ti, Nb, and Mo on recrystallization kinetics during annealing in various cold-rolled Dual-Phase steel grades. The use of combined experimental and modeling approaches allows a deeper understanding of the separate influence of heating rate and the addition of microalloying elements. The comparative effect of Ti, Nb, and Mo as solute elements and as precipitates on ferrite recrystallization is also clarified. It is shown that solute drag has the largest delaying effect on recrystallization in the present case and that the order of solute drag effectiveness of microalloying elements is Nb > Mo > Ti.

Combined Effect of Heating Rate and Microalloying Elements on Recrystallization During Annealing of Dual-Phase Steels

NASA Astrophysics Data System (ADS)

Bellavoine, Marion; Dumont, Myriam; Drillet, Josée; Hébert, Véronique; Maugis, Philippe

2018-07-01

Adjusting ferrite recrystallization kinetics during annealing is a way to control the final microstructure and thus the mechanical properties of advanced cold-rolled high-strength steels. Two strategies are commonly used for this purpose: adjusting heating rates and/or adding microalloying elements. The present work investigates the effect of heating rate and microalloying elements Ti, Nb, and Mo on recrystallization kinetics during annealing in various cold-rolled Dual-Phase steel grades. The use of combined experimental and modeling approaches allows a deeper understanding of the separate influence of heating rate and the addition of microalloying elements. The comparative effect of Ti, Nb, and Mo as solute elements and as precipitates on ferrite recrystallization is also clarified. It is shown that solute drag has the largest delaying effect on recrystallization in the present case and that the order of solute drag effectiveness of microalloying elements is Nb > Mo > Ti.

Recrystallization kinetics of warm-rolled tungsten in the temperature range 1150-1350 °C

NASA Astrophysics Data System (ADS)

Alfonso, A.; Juul Jensen, D.; Luo, G.-N.; Pantleon, W.

2014-12-01

Pure tungsten is a potential candidate material for the plasma-facing first wall and the divertor of fusion reactors. Both parts have to withstand high temperatures during service. This will alter the microstructure of the material by recovery, recrystallization and grain growth and will cause degradation in material properties as a loss in mechanical strength and embrittlement. The thermal stability of a pure tungsten plate warm-rolled to 67% thickness reduction was investigated by long-term isothermal annealing in the temperature range between 1150 °C and 1350 °C up to 2200 h. Changes in the mechanical properties during annealing are quantified by Vickers hardness measurements. They are described concisely by classical kinetic models for recovery and recrystallization. The observed time spans for recrystallization and the obtained value for the activation energy of the recrystallization process indicate a sufficient thermal stability of the tungsten plate during operation below 1075 °C.

Boundary migration in a 3D deformed microstructure inside an opaque sample

DOE PAGES

Zhang, Y. B.; Budai, J. D.; Tischler, J. Z.; ...

2017-06-30

How boundaries surrounding recrystallization grains migrate through the 3D network of dislocation boundaries in deformed crystalline materials is unknown and critical for the resulting recrystallized crystalline materials. Furthermore, by using X-ray Laue diffraction microscopy, we show for the first time the migration pattern of a typical recrystallization boundary through a well-characterized deformation matrix. The data provide a unique possibility to investigate effects of both boundary misorientation and plane normal on the migration, information which cannot be accessed with any other techniques. Our results show that neither of these two parameters can explain the observed migration behavior. Instead we suggest thatmore » the subdivision of the deformed microstructure ahead of the boundary plays the dominant role. Our experimental observations challenge the assumptions of existing recrystallization theories, and set the stage for determination of mobilities of recrystallization boundaries.« less

Improvement of seawater salt quality by hydro-extraction and re-crystallization methods

NASA Astrophysics Data System (ADS)

Sumada, K.; Dewati, R.; Suprihatin

2018-01-01

Indonesia is one of the salt producing countries that use sea water as a source of raw materials, the quality of salt produced is influenced by the quality of sea water. The resulting average salt quality contains 85-90% NaCl. The Indonesian National Standard (SNI) for human salt’s consumption sodium chloride content is 94.7 % (dry base) and for industrial salt 98,5 %. In this study developed the re-crystallization without chemical and hydro-extraction method. The objective of this research to choose the best methods based on efficiency. The results showed that re-crystallization method can produce salt with NaCl content 99,21%, while hydro-extraction method content 99,34 % NaCl. The salt produced through both methods can be used as a consumption and industrial salt, Hydro-extraction method is more efficient than re-crystallization method because re-crystallization method requires heat energy.

Diffusion-Controlled Recrystallization of Water Sorbed into Poly(meth)acrylates Revealed by Variable-Temperature Mid-Infrared Spectroscopy and Molecular Dynamics Simulation.

PubMed

Yasoshima, Nobuhiro; Fukuoka, Mizuki; Kitano, Hiromi; Kagaya, Shigehiro; Ishiyama, Tatsuya; Gemmei-Ide, Makoto

2017-05-18

Recrystallization behaviors of water sorbed into four poly(meth)acrylates, poly(2-methoxyethyl acrylate), poly(tetrahydrofurfuryl acrylate), poly(methyl acrylate), and poly(methyl methacrylate), are investigated by variable-temperature mid-infrared (VT-MIR) spectroscopy and molecular dynamics (MD) simulation. VT-MIR spectra demonstrate that recrystallization temperatures of water sorbed into the polymers are positively correlated with their glass-transition temperatures reported previously. The present MD simulation shows that a lower-limit temperature of the diffusion for the sorbed water and the glass-transition temperatures of the polymers also have a positive correlation, indicating that the recrystallization is controlled by diffusion mechanism rather than reorientation mechanism. Detailed molecular processes of not only recrystallization during rewarming but also crystallization during cooling and hydrogen-bonding states of water in the polymers are systematically analyzed and discussed.

Synthesis, structure and stability of a chiral imine-based Schiff-based ligand derived from L-glutamic acid and its [Cu4] complex

NASA Astrophysics Data System (ADS)

Muche, Simon; Levacheva, Irina; Samsonova, Olga; Biernasiuk, Anna; Malm, Anna; Lonsdale, Richard; Popiołek, Łukasz; Bakowsky, Udo; Hołyńska, Małgorzata

2017-01-01

Studies of the stability of a ligand derived from L-glutamic acid and ortho-vanillin and its new [Cu4] complex are presented. The [Cu4] complex contains a heterocubane [CuII4O4] core and pendant carboxylic groups increasing its solubility in water, also under basic conditions. The stability of the complex in different solvents is confirmed with ESI-MS studies and such experiments as successful recrystallization. The complex is stable also under physiological conditions whereas the ligand is partly decomposed to L-glutamic acid and ortho-vanillin.

Porous Hydrogen-Bonded Organic Frameworks.

PubMed

Han, Yi-Fei; Yuan, Ying-Xue; Wang, Hong-Bo

2017-02-13

Ordered porous solid-state architectures constructed via non-covalent supramolecular self-assembly have attracted increasing interest due to their unique advantages and potential applications. Porous metal-coordination organic frameworks (MOFs) are generated by the assembly of metal coordination centers and organic linkers. Compared to MOFs, porous hydrogen-bonded organic frameworks (HOFs) are readily purified and recovered via simple recrystallization. However, due to lacking of sufficiently ability to orientate self-aggregation of building motifs in predictable manners, rational design and preparation of porous HOFs are still challenging. Herein, we summarize recent developments about porous HOFs and attempt to gain deeper insights into the design strategies of basic building motifs.

Cellular monotectic model solidification

NASA Technical Reports Server (NTRS)

Kaukler, William F.

1987-01-01

Succinonitrile (sn) was purified to a superior level using a fractional recrystallization method. The melting point of the best twice recrystallized sn was not raised by following with double distillation. This was tested using differential scanning calorimetry. The peak shape on melting also proved that double distillation after double recrystallization did not improve the quality. Stability and phase diagrams for succinonitrile and glycerol are presented.

Effect of one-step recrystallization on the grain boundary evolution of CoCrFeMnNi high entropy alloy and its subsystems.

PubMed

Chen, Bo-Ru; Yeh, An-Chou; Yeh, Jien-Wei

2016-02-29

In this study, the grain boundary evolution of equiatomic CoCrFeMnNi, CoCrFeNi, and FeCoNi alloys after one-step recrystallization were investigated. The special boundary fraction and twin density of these alloys were evaluated by electron backscatter diffraction analysis. Among the three alloys tested, FeCoNi exhibited the highest special boundary fraction and twin density after one-step recrystallization. The special boundary increment after one-step recrystallization was mainly affected by grain boundary velocity, while twin density was mainly affected by average grain boundary energy and twin boundary energy.

High-quality Silicon Films Prepared by Zone-melting Recrystallization

NASA Technical Reports Server (NTRS)

Chen, C. K.; Geis, M. W.; Tsaur, B. Y.; Fan, J. C. C.

1984-01-01

The graphite strip heater zone melting recrystallization (ZMR) technique is described. The material properties of the ZMR films, and SOI device results are reviewed. Although our ZMR work is primarily motivated by integrated circuit applications, this work evolved in part from earlier research on laser crystallization of thick amorphous GaAs and Si films, which was undertaken with the goal of producing low cost photovoltaic materials. The ZMR growth process and its effect on the properties of the recrystallized films may contribute some insight to a general understanding of the rapid recrystallization of Si for solar cells. Adaptation of ZMR for solar cell fabrication is considered.

Effect of Scandium on the Interaction of Concurrent Precipitation and Recrystallization in Commercial AA3003 Aluminum Alloy

NASA Astrophysics Data System (ADS)

Tu, Yiyou; Qian, Huan; Zhou, Xuefeng; Jiang, Jianqing

2014-04-01

In the current study, the effect of Sc addition on the interaction of concurrent precipitation and recrystallization in commercial AA3003 aluminum alloy was investigated using optical microscopy, scanning electron microscopy, and transmission electron microscopy. In case of AA3003 alloy, which was cold rolled to a true strain of 2.20 and heated at a heating rate of 150 K/s, the onset of precipitation and ending of recrystallization are signified by the critical temperature, T C ~740 K (467 °C). There is a change in the shape of the recrystallized grains from pancake-like to equiaxed shape, as the annealing temperature increases greater than T C. In case of AA3003 alloy microalloyed with 0.4 wt pct of Sc, the high no. density precipitation of coherent Al3Sc precipitates always occurs before recrystallization because of the small nucleation barrier and high rate of decomposition. This leads to extremely coarse pancake-like recrystallization grains with high fraction of low-angle grain boundaries in the entire annealing temperature range, even at a high brazing temperature of 883 K (610 °C).

Incorporation of Eu(III) into Calcite under Recrystallization conditions.

PubMed

Hellebrandt, S E; Hofmann, S; Jordan, N; Barkleit, A; Schmidt, M

2016-09-13

The interaction of calcite with trivalent europium under recrystallization conditions was studied on the molecular level using site-selective time-resolved laser fluorescence spectroscopy (TRLFS). We conducted batch studies with a reaction time from seven days up to three years with three calcite powders, which differed in their specific surface area, recrystallization rates and impurities content. With increase of the recrystallization rate incorporation of Eu(3+) occurs faster and its speciation comes to be dominated by one species with its excitation maximum at 578.8 nm, so far not identified during previous investigations of this process under growth and phase transformation conditions. A long lifetime of 3750 μs demonstrates complete loss of hydration, consequently Eu must have been incorporated into the bulk crystal. The results show a strong dependence of the incorporation kinetics on the recrystallization rate of the different calcites. Furthermore the investigation of the effect of different background electrolytes (NaCl and KCl) demonstrate that the incorporation process under recrystallization conditions strongly depends on the availability of Na(+). These findings emphasize the different retention potential of calcite as a primary and secondary mineral e.g. in a nuclear waste disposal site.

Inhibiting ice recrystallization and optimization of cell viability after cryopreservation.

PubMed

Chaytor, Jennifer L; Tokarew, Jacqueline M; Wu, Luke K; Leclère, Mathieu; Tam, Roger Y; Capicciotti, Chantelle J; Guolla, Louise; von Moos, Elisabeth; Findlay, C Scott; Allan, David S; Ben, Robert N

2012-01-01

The ice recrystallization inhibition activity of various mono- and disaccharides has been correlated with their ability to cryopreserve human cell lines at various concentrations. Cell viabilities after cryopreservation were compared with control experiments where cells were cryopreserved with dimethylsulfoxide (DMSO). The most potent inhibitors of ice recrystallization were 220 mM solutions of disaccharides; however, the best cell viability was obtained when a 200 mM d-galactose solution was utilized. This solution was minimally cytotoxic at physiological temperature and effectively preserved cells during freeze-thaw. In fact, this carbohydrate was just as effective as a 5% DMSO solution. Further studies indicated that the cryoprotective benefit of d-galactose was a result of its internalization and its ability to mitigate osmotic stress, prevent intracellular ice formation and/or inhibit ice recrystallization. This study supports the hypothesis that the ability of a cryoprotectant to inhibit ice recrystallization is an important property to enhance cell viability post-freeze-thaw. This cryoprotective benefit is observed in three different human cell lines. Furthermore, we demonstrated that the ability of a potential cryoprotectant to inhibit ice recrystallation may be used as a predictor of its ability to preserve cells at subzero temperatures.

Incorporation of Eu(III) into Calcite under Recrystallization conditions

PubMed Central

Hellebrandt, S. E.; Hofmann, S.; Jordan, N.; Barkleit, A.; Schmidt, M.

2016-01-01

The interaction of calcite with trivalent europium under recrystallization conditions was studied on the molecular level using site-selective time-resolved laser fluorescence spectroscopy (TRLFS). We conducted batch studies with a reaction time from seven days up to three years with three calcite powders, which differed in their specific surface area, recrystallization rates and impurities content. With increase of the recrystallization rate incorporation of Eu3+ occurs faster and its speciation comes to be dominated by one species with its excitation maximum at 578.8 nm, so far not identified during previous investigations of this process under growth and phase transformation conditions. A long lifetime of 3750 μs demonstrates complete loss of hydration, consequently Eu must have been incorporated into the bulk crystal. The results show a strong dependence of the incorporation kinetics on the recrystallization rate of the different calcites. Furthermore the investigation of the effect of different background electrolytes (NaCl and KCl) demonstrate that the incorporation process under recrystallization conditions strongly depends on the availability of Na+. These findings emphasize the different retention potential of calcite as a primary and secondary mineral e.g. in a nuclear waste disposal site. PMID:27618958

Publications - PDF 99-24B | Alaska Division of Geological & Geophysical

Science.gov Websites

Alaska's Mineral Industry Reports AKGeology.info Rare Earth Elements WebGeochem Engineering Geology Alaska (6.4 M) Keywords Ar-Ar; Bedrock; Bedrock Geologic Map; Bedrock Geology; Economic Geology; Geochronology ; Geologic; Geologic Map; Geology; Gold; Lode; Plutonic; Plutonic Hosted; Porphyry; STATEMAP Project; Silver

Finding of No Significant Impact: Military Family Housing Revitalization Project Nellis Air Force Base, Nevada

DTIC Science & Technology

2005-02-01

extent, plutonic rocks (all from the early Cenozoic Era). The sedimentary rocks are predominantly carbonates (limestone and dolomite), although there are...comprised of volcanic rocks, while the plutonic rocks also are exposed at a number of locations in the southern mountains (Longwell, et al., 1965

Magma mixing in granitic rocks of the central Sierra Nevada, California

NASA Astrophysics Data System (ADS)

Reid, John B.; Evans, Owen C.; Fates, Dailey G.

1983-12-01

The El Capitan alaskite exposed in the North American Wall, Yosemite National Park, was intruded by two sets of mafic dikes that interacted thermally and chemically with the host alaskite. Comparisons of petrographic and compositional data for these dikes and alaskite with published data for Sierra Nevada plutons lead us to suggest that mafic magmas were important in the generation of the Sierra Nevada batholith. Specifically, we conclude that: (1) intrusion of mafic magmas in the lower crust caused partial melting and generation of alaskite (rhyolitic) magmas; (2) interaction between the mafic and felsic magmas lead to the observed linear variation diagrams for major elements; (3) most mafic inclusions in Sierra Nevada plutons represent chilled pillows of mafic magmas, related by fractional crystallization and granitoid assimilation, that dissolve into their felsic host and contaminate it to intermediate (granodioritic) compositions; (4) vesiculation of hydrous mafic magma upon chilling may allow buoyant mafic inclusions and their disaggregation products to collect beneath a pluton's domed ceiling causing the zoning (mafic margins-to-felsic core) that these plutons exhibit.

Anisotropic Morphological Changes in Goethite during Fe(2+)-Catalyzed Recrystallization.

PubMed

Joshi, Prachi; Gorski, Christopher A

2016-07-19

When goethite is exposed to aqueous Fe(2+), rapid and extensive Fe atom exchange can occur between solid-phase Fe(3+) and aqueous Fe(2+) in a process referred to as Fe(2+)-catalyzed recrystallization. This process can lead to the structural incorporation or release of trace elements, which has important implications for contaminant remediation and nutrient biogeochemical cycling. Prior work found that the process did not cause major changes to the goethite structure or morphology. Here, we further investigated if and how goethite morphology and aggregation behavior changed temporally during Fe(2+)-catalyzed recrystallization. On the basis of existing literature, we hypothesized that Fe(2+)-catalyzed recrystallization of goethite would not result in changes to individual particle morphology or interparticle interactions. To test this, we reacted nanoparticulate goethite with aqueous Fe(2+) at pH 7.5 over 30 days and used transmission electron microscopy (TEM), cryogenic TEM, and (55)Fe as an isotope tracer to observe changes in particle dimensions, aggregation, and isotopic composition over time. Over the course of 30 days, the goethite particles substantially recrystallized, and the particle dimensions changed anisotropically, resulting in a preferential increase in the mean particle width. The temporal changes in goethite morphology could not be completely explained by a single mineral-transformation mechanism but rather indicated that multiple transformation mechanisms occurred concurrently. Collectively, these results demonstrate that the morphology of goethite nanoparticles does change during recrystallization, which is an important step toward identifying the driving force(s) of recrystallization.

In Vitro Characterization of the Two-Stage Non-Classical Reassembly Pathway of S-Layers

PubMed Central

Breitwieser, Andreas; Iturri, Jagoba; Toca-Herrera, Jose-Luis; Sleytr, Uwe B.; Pum, Dietmar

2017-01-01

The recombinant bacterial surface layer (S-layer) protein rSbpA of Lysinibacillus sphaericus CCM 2177 is an ideal model system to study non-classical nucleation and growth of protein crystals at surfaces since the recrystallization process may be separated into two distinct steps: (i) adsorption of S-layer protein monomers on silicon surfaces is completed within 5 min and the amount of bound S-layer protein sufficient for the subsequent formation of a closed crystalline monolayer; (ii) the recrystallization process is triggered—after washing away the unbound S-layer protein—by the addition of a CaCl2 containing buffer solution, and completed after approximately 2 h. The entire self-assembly process including the formation of amorphous clusters, the subsequent transformation into crystalline monomolecular arrays, and finally crystal growth into extended lattices was investigated by quartz crystal microbalance with dissipation (QCM-D) and atomic force microscopy (AFM). Moreover, contact angle measurements showed that the surface properties of S-layers change from hydrophilic to hydrophobic as the crystallization proceeds. This two-step approach is new in basic and application driven S-layer research and, most likely, will have advantages for functionalizing surfaces (e.g., by spray-coating) with tailor-made biological sensing layers. PMID:28216572

Sr-Nd-Hf-O isotope geochemistry of the Ertaibei pluton, East Junggar, NW China: Implications for development of a crustal-scale granitoid pluton and crustal growth

NASA Astrophysics Data System (ADS)

Tang, Gong-Jian; Wang, Qiang; Zhang, Chunfu; Wyman, Derek A.; Dan, Wei; Xia, Xiao-Ping; Chen, Hong-Yi; Zhao, Zhen-Hua

2017-09-01

To better understand the compositional diversity of plutonic complexes and crustal growth of the Central Asian Orogenic Belt (CAOB), we conducted an integrated study of the Ertaibei pluton, which obtained geochronological, petrological, geochemical, and isotopic (including whole rock Sr-Nd, in situ zircon Hf-O) data. The pluton (ca. 300 Ma) is composed of granodiorites that contain mafic microgranular enclaves (MMEs), dolerite dikes, and granite dikes containing quartz-tourmaline orbicules. The dolerite dikes were possibly generated by melting of an asthenospheric mantle source, with discrete assimilation of lower crustal components in the MASH (melting, assimilation, storage, and homogenization) zone. The MMEs originated from hybridization between mantle and crust-derived magmas, which spanned a range of melting depths (˜25-30 km) in the MASH zone and were episodically tapped. Melting of the basaltic lower crust in the core of the MASH zone generated magmas to form the granodiorites. The granite dikes originated from melting of an arc-derived volcanogenic sedimentary source with a minor underplated basaltic source in the roof of the MASH zone (˜25 km). The compositional diversity reflects both the magma sources and the degree of maturation of the MASH zone. Although having mantle-like radiogenic isotope compositions, the Ertaibei and other postcollisional granitoids show high zircon δ18O values (mostly between +6 and +9‰), indicating a negligible contribution to the CAOB crustal growth during the postcollisional period.

U-Pb ages and Hf isotope compositions of zircons in plutonic rocks from the central Famatinian arc, Argentina

NASA Astrophysics Data System (ADS)

Otamendi, Juan E.; Ducea, Mihai N.; Cristofolini, Eber A.; Tibaldi, Alina M.; Camilletti, Giuliano C.; Bergantz, George W.

2017-07-01

The Famatinian arc formed around the South Iapetus rim during the Ordovician, when oceanic lithosphere subducted beneath the West Gondwana margin. We present combined in situ U-Th-Pb and Lu-Hf isotope analyses for zircon to gain insights into the origin and evolution of Famatinian magmatism. Zircon crystals sampled from four intermediate and silicic plutonic rocks confirm previous observations showing that voluminous magmatism took place during a relatively short pulse between the Early and Middle Ordovician (472-465 Ma). The entire zircon population for the four plutonic rocks yields coherent εHf negative values and spreads over several ranges of initial εHf(t) units (-0.3 to -8.0). The range of εHf units in detrital zircons of Famatinian metasedimentary rocks reflects a prolonged history of the cratonic sources during the Proterozoic to the earliest Phanerozoic. Typical tonalites and granodiorites that contain zircons with evolved Hf isotopic compositions formed upon incorporating (meta)sedimentary materials into calc-alkaline metaluminous magmas. The evolved Hf isotope ratios of zircons in the subduction related plutonic rocks strongly reflect the Hf isotopic character of the metasedimentary contaminant, even though the linked differentiation and growth of the Famatinian arc crust was driven by ascending and evolving mantle magmas. Geochronology and Hf isotope systematics in plutonic zircons allow us understanding the petrogenesis of igneous series and the provenance of magma sources. However, these data could be inadequate for computing model ages and supporting models of crustal evolution.

Granite emplacement at the termination of a major Variscan transcurrent shear zone: The late collisional Viseu batholith

NASA Astrophysics Data System (ADS)

Valle Aguado, B.; Azevedo, M. R.; Nolan, J.; Medina, J.; Costa, M. M.; Corfu, F.; Martínez Catalán, J. R.

2017-05-01

A major event of plutonic activity occurred all across the Central Iberian Zone of the Iberian Variscan Belt at the end of Late Paleozoic Variscan collisional tectonism. The present study focuses on the western sector of the Viseu late-post-tectonic batholith (central Portugal), a large composite intrusion comprising three main plutonic units: (a) small bodies of mafic to intermediate composition preferentially concentrated along the northern border, (b) a wide ring of coarse porphyritic biotite monzogranite (Cota-Viseu granite) and (c) a more evolved medium porphyritic, biotite-muscovite monzogranite occupying the central part of the intrusion (Alcafache granite). The compositional zonation pattern of the whole batholith and the complex mixing/mingling relationships between the voluminous Cota-Viseu porphyritic granite and the mafic/intermediate rocks suggest that these melts were withdrawn from a lower crustal source region undergoing partial melting, invasion by mantle-derived mafic magmas, mixing and fractional crystallization. New CA-ID-TIMS U-Pb zircon ages indicate that pluton assembly via multipulse injection of successive magma batches took place between 299.4 ± 0.4 Ma and 296.0 ± 0.6 Ma. A detailed anisotropy of magnetic susceptibility (AMS) survey suggests that pluton emplacement occurred at the extensional termination of a regional-scale, ENE-WSW trending, sinistral D3 shear zone - the Juzbado-Penalva Shear Zone (JPSZ). A dilational opening model involving the development of "en-échelon" tensional gashes at the extensional termination of the fault, followed by progressive opening and widening of north-south trending fractures, provided the space into which the successive magma batches arriving from below were emplaced. Vertical inflation was accommodated by depression of the pluton floor. The proposed model is consistent with the asymmetric wedge-shaped geometry of the intrusion (steep root zone on the northern side, discordant subvertical walls and a shallowing pluton floor towards the south).

U-Pb Zircon Geochronology of the Emigrant Gap Composite Pluton, Northern Sierra Nevada, California: Implications for the Nevadan Orogeny

USGS Publications Warehouse

Girty, G. H.; Yoshinobu, S.; Wracher, M.D.; Girty, M.S.; Bryan, K.A.; Skinner, J.E.; McNulty, B.A.; Bracchi, K.A.; Harwood, D.S.; Hanson, R.E.

1993-01-01

The undeformed Emigrant Gap composite pluton postdates the Lower to Middle Jurassic Sailor Canyon and Middle Jurassic Tuttle Lake Formations. According to earlier workers, these latterformations contain main and late phase Nevadan-aged (155 +/-3 Ma) spaced, slaty, phyllitic, and crenulation cleavage. Recently discovered fossils indicate that the upper part of the Sailor Canyon Formation can be no older than early Bajocian and no younger than Bathonian. The Tuttle Lake Formation stratigraphically overlies the Sailor Canyon Formation and thus probably includes middle to late Bajocian and/or Bathonian strata.The results of U-Pb work suggest that the Emigrant Gap composite pluton is composed of units that range in age from 168 +/-2 Ma (latest Bathonian to early Callovian) to 163-164 Ma (late Callovian). These new data, when combined with observations summarized above, imply that the Tuttle Lake Formation is older than the undeformed oldest unit of the Emigrant Gap composite pluton (i.e., latest Bathonian or early Callovian), and thus was probably deposited and deformed sometime between middle Bajocian and middle late Bathonian time. Hence, the cleavage contained within the Sailor Canyon and Tuttle Lake Formations could not have formed during the Late Jurassic Nevadan orogeny 155 +/-3 Ma as suggested by earlier workers.Within the foothills belt, just to the west of the Emigrant Gap composite pluton, a pronounced contractional deformation occurred sometime between 200 and 163 Ma (Early to Middle Jurassic). This middle Mesozoic deformation apparently was the result of a collision between an oceanic arc and continental North America. Because of the gross similarity in timing of structures produced during this collision and structures in the wall rocks of the Emigrant Gap composite pluton, we suggest that the latter Middle Jurassic structures are also the result of arc-continent collision, albeit a slightly more continentward expression.

Reconnaissance study of the Taylor Mountains pluton, southwestern Alaska

USGS Publications Warehouse

Hudson, Travis L.; Miller, Marti L.; Klimasauskas, Edward P.; Layer, Paul W.

2010-01-01

The Taylor Mountains pluton is a Late Cretaceous to early Tertiary (median age 65 + or ? 2 Ma) epizonal, composite biotite granite stock located about 235 km (145 mi) northeast of Dillingham in southwestern Alaska. This 30 km2 (12 mi2) pluton has sharp and discordant contacts with hornfels that developed in Upper Cretaceous clastic sedimentary rocks of the Kuskokwim Group. The three intrusive phases in the Taylor Mountains pluton, in order of emplacement, are (1) porphyritic granite containing large K-feldspar phenocrysts in a coarse-grained groundmass, (2) porphyritic granite containing large K-feldspar and smaller, but still coarse, plagioclase, quartz, and biotite phenocrysts in a fine-grained groundmass, and (3) fine-grained, leucocratic, equigranular granite. The porphyritic granites have different emplacement histories, but similar compositions; averages are 69.43 percent SiO2, 1.62 percent CaO, 5.23 percent FeO+MgO, 3.11 percent Na2O, and 4.50 percent K2O. The fine-grained, equigranular granite is distinctly felsic compared to porphyritic granite; it averages 75.3 percent SiO2, 0.49 percent CaO, 1.52 percent FeO+MgO, 3.31 percent Na2O, and 4.87 percent K2O. Many trace elements including Ni, Cr, Sc, V, Ba, Sr, Zr, Y, Nb, La, Ce, Th, and Nd are strongly depleted in fine-grained equigranular granite. Trace elements are not highly enriched in any of the granites. Known hydrothermal alteration is limited to one tourmaline-quartz replacement zone in porphyritic granite. Mineral deposits in the Taylor Mountains area are primarily placer gold (plus wolframite, cassiterite, and cinnabar); sources for these likely include scattered veins in hornfels peripheral to the Taylor Mountain pluton. The granite magmas that formed the Taylor Mountains pluton are thought to represent melted continental crust that possibly formed in response to high heat flow in the waning stage of Late Cretaceous subduction beneath interior Alaska.

New geochronological evidence for the timing of early Tertiary ridge subduction in southern Alaska: A section in Geologic studies in Alaska by the U.S. Geological Survey, 1998

USGS Publications Warehouse

Bradley, Dwight C.; Parrish, Randall; Clendenen, William; Lux, Daniel R.; Layer, Paul W.; Heizler, Matthew; Donley, D. Thomas

2000-01-01

We present new U/Pb (monazite, zircon) and 40Ar/39Ar (biotite, amphibole) ages for 10 Tertiary plutons and dikes that intrude the Chugach–Prince William accretionary complex of southern Alaska. The Sanak pluton of Sanak Island yielded ages of 61.1±0.5 Ma (zircon) and 62.7±0.35 (biotite). The Shumagin pluton of Big Koniuji Island yielded a U/Pb zircon age of 61.1±0.3 Ma. Two biotite ages from the Kodiak batholith of Kodiak Island are nearly identical at 58.3±0.2 and 57.3±2.5 Ma. Amphibole from a dike at Malina Bay, Afognak Island, is 59.3±2.2 Ma; amphibole from a dike in Seldovia Bay, Kenai Peninsula, is 57.0±0.2 Ma. The Nuka pluton, Kenai Peninsula, yielded ages of 56.0±0.5 Ma (monazite) and 54.2±0.1 (biotite). Biotite plateau ages are reported for the Aialik (52.2±0.9 Ma), Tustumena (53.2±1.1 Ma), Chernof (54.2±1.1 Ma), and Hive Island (53.4±0.4 Ma) plutons of the Kenai Peninsula. Together, these new results confirm, but refine, the previously documented along-strike diachronous age trend of near-trench magmatism during the early Tertiary. We suggest that this event began at 61 Ma at Sanak Island, 2-4 m.y. later than previously supposed. An intermediate dike near Tutka Bay, Kenai Peninsula, yielded a hornblende age of 115±2 Ma. This represents a near-trench magmatic event that had heretofore gone unrecognized on the Kenai Peninsula; correlative Early Cretaceous near-trench plutons are known from the western Chugach Mountains near Palmer.

Modeling the microstructural changes during hot tandem rolling of AA5 XXX aluminum alloys: Part I. Microstructural evolution

NASA Astrophysics Data System (ADS)

Wells, M. A.; Samarasekera, I. V.; Brimacombe, J. K.; Hawbolt, E. B.; Lloyd, D. J.

1998-06-01

A comprehensive mathematical model of the hot tandem rolling process for aluminum alloys has been developed. Reflecting the complex thermomechanical and microstructural changes effected in the alloys during rolling, the model incorporated heat flow, plastic deformation, kinetics of static recrystallization, final recrystallized grain size, and texture evolution. The results of this microstructural engineering study, combining computer modeling, laboratory tests, and industrial measurements, are presented in three parts. In this Part I, laboratory measurements of static recrystallization kinetics and final recrystallized grain size are described for AA5182 and AA5052 aluminum alloys and expressed quantitatively by semiempirical equations. In Part II, laboratory measurements of the texture evolution during static recrystallization are described for each of the alloys and expressed mathematically using a modified form of the Avrami equation. Finally, Part III of this article describes the development of an overall mathematical model for an industrial aluminum hot tandem rolling process which incorporates the microstructure and texture equations developed and the model validation using industrial data. The laboratory measurements for the microstructural evolution were carried out using industrially rolled material and a state-of-the-art plane strain compression tester at Alcan International. Each sample was given a single deformation and heat treated in a salt bath at 400 °C for various lengths of time to effect different levels of recrystallization in the samples. The range of hot-working conditions used for the laboratory study was chosen to represent conditions typically seen in industrial aluminum hot tandem rolling processes, i.e., deformation temperatures of 350 °C to 500 °C, strain rates of 0.5 to 100 seconds and total strains of 0.5 to 2.0. The semiempirical equations developed indicated that both the recrystallization kinetics and the final recrystallized grain size were dependent on the deformation history of the material i.e., total strain and Zener-Hollomon parameter ( Z), where Z = dot \\varepsilon exp left( {{Q_{def} }/{RT_{def }}} right) and time at the recrystallization temperature.

Activity of slip in amphibolite facies, fine-grained recrystallized quartz aggregates: high differential stress during high-T creep of quartz?

NASA Astrophysics Data System (ADS)

Viegas, G.; Menegon, L. M.; Archanjo, C. J.

2016-12-01

Quartz axis fabrics are a valuable tool to investigate strain partitioning/distribution in both naturally- and experimentally deformed quartz. Previous works have shown that slip dominates at high temperatures (> 600º C) and water-rich, commonly sub-magmatic conditions, typically associated with large grain sizes and grain boundary migration microstructures. In the Pernambuco shear zone, sheared quartz veins from a protomylonitic granitoid formed during the main amphibolite facies event constrained at mid-crustal conditions (550-600ºC, 5 kbar). The veins contain heterogeneously-deformed primary quartz grains, which typically form both flattened and elongated ribbons as well as more equant porphyroclasts surrounded by aggregates of fine-grained (ca. 20 µm) recrystallized aggregates. Recrystallized quartz with the same fine grain size may also occur in intracrystalline bands within the porphyroclasts. Chessboard extinction is widely observed in the porphyroclasts, and subgrain boundaries are either parallel or normal to the (0001) direction, suggesting slip on both basal and prismatic planes during recrystallization. Crystallographic preferred orientations (CPOs) of porphyroclasts (≥ 100 µm) show maxima of (0001) axes subparallel to Z and X, suggesting coeval glide along both basal and prism planes during shearing. In the recrystallized aggregates, fabric strength tends to become weaker, but still records glide along and directions. These preliminary results suggest that naturally deformed quartz veins record coeval activity of and slip during dynamic recrystallization under amphibolite facies conditions. The microstructure suggests that the CPO of the fine-grained aggregates is host-controlled and results from dominant subgrain rotation recrystallization. To our knowledge, activity of slip in fine-grained recrystallized aggregates has never been reported before. Thus, these preliminary results call into question the general view that slip is expected to be active only during dominant high-T grain boundary migration in the lower crust. In our samples, a fine grain size of dynamically recrystallized quartz associated with slip might indicate high differential stress/strain rates during high-T viscous creep along the Pernambuco shear zone.

Magma flow recorded by magmatic and magnetic fabrics in a shallow granitic pluton: La Gloria Pluton, central Chile

NASA Astrophysics Data System (ADS)

Payacán, I. J.; Gutiérrez, F. J.; Gelman, S. E.; Bachmann, O.; Parada, M. A.

2013-12-01

To better understand the dynamics of a small, shallow, silicic magma reservoir, magmatic and magnetic (AMS) fabrics are compared in samples obtained from La Gloria Pluton (LGP), a 10 Ma granitic intrusion located in southern Andes. The magnetic fabric of LGP, mainly given by magnetite, is characterized by oblate shapes. Magnetic lineations have a NW trend with subhorizontal dip, following the main pluton elongation, while magnetic foliation planes have dips varying gradually from vertical at the walls to subhorizontal toward the center and the roof of the pluton. On the basis of numerical simulations, magnetic fabric was interpreted to represent the shear record induced by magmatic convection along solidification fronts as the reservoir reached its rheological locking point. Magmatic fabric (mineral orientation) was determined on 12 samples along the pluton. Three mutually orthogonal thin sections were produced for each sample, perpendicular to the AMS tensor axes. Size and orientation of individual crystals were obtained by image analysis. A 2-D tensor for two mineral groups (plagioclase and amphibole+biotitie) was defined in each mineral plane projecting the crystal lengths on the main crystal orientation (given by Bingham statistics). A 3-D magmatic fabric tensor was obtained. In order to compare the magmatic and magnetic fabrics, magmatic anisotropy parameters were defined similar to the AMS tensors. Magmatic fabric and anisotropy parameter values vary depending on the location inside the pluton: (1) Samples located at the borders exhibit vertical foliations and lineations with a NW trend, similar to the magnetic fabric tensors and higher anisotropy values for plagioclase than amphibole+biotite,; (2) samples located at the center of the LGP commonly present subvertical foliations/lineations, which differ from the magnetic fabric, and higher magmatic anisotropy degree values for amphibole+biotite than plagioclase. Based on numerical simulations of the fluid dynamics of the LGP and the different aspect ratio of minerals, we interpret that both the magnetic and magmatic fabrics represent the shear pattern produced along solidification fronts due to rheological locking during late-stage of magma cooling. It is interesting to note that while the magmatic fabric records vertical convection patterns in the core of the pluton, in agreement with predictions from numerical simulations, the magnetic fabric does not, probably because shear rate values are too low. Acknowledgments. This research has been developed by the FONDECYT N°11100241 and PBCT-PDA07 projects granted by CONICYT (Chilean National Commission for Science and Technology). I.P. is supported by CONICYT magister grant N°22130729. We thank to FONDAP N°15090013 for supporting during the congress.

Development of modal layering in granites: a case study from the Carna Pluton, Connemara, Ireland

NASA Astrophysics Data System (ADS)

McKenzie, Kirsty; McCarthy, William; Hunt, Emma

2016-04-01

Modal layering in igneous rocks uniquely record dynamic processes operating in magma chambers and also host a large proportion of Earth's strategic mineral deposits. This research investigates the origin of biotite modal layering and primary pseudo-sedimentary structures in felsic magmas, by using a combination of Crystal Size Distribution (CSD) analysis and Electron Probe Microanalysis (EPMA) to determine the mechanisms responsible for the development of these structures in the Carna Pluton, Connemara, Ireland. The Carna Pluton is a composite granodiorite intrusion and is one of five plutons comprising the Galway Granite Complex (425 - 380 Ma). Prominent 30 cm thick modal layers are defined by sharp basal contacts to a biotite-rich (20%) granite, which grades upward over 10 cm into biotite-poor, alkali-feldspar megacrystic granite. The layering strikes parallel to, and dips 30-60° N toward the external pluton contact. Pseudo-sedimentary structures (cross-bedding, flame structures, slumping and crystal graded bedding) are observed within these layers. Petrographic observations indicate the layers contain euhedral biotite and fresh undeformed quartz and feldspar. Throughout the pluton, alkali-feldspar phenocrysts define a foliation that is sub-parallel to the strike of biotite modal layers. Together these observations indicate that the intrusion's concentric foliation, biotite layers and associated structures formed in the magmatic state and due to a complex interaction between magma flow and crystallisation processes. Biotite CSDs (>250 crystals per sample) were determined for nine samples across three biotite-rich layers in a single unit. Preliminary CSD results suggest biotite within basal contacts accumulated via fractional crystallisation within an upward-growing crystal pile, likely reflecting the yield strength of the magma as a limiting factor to gravitational settling of biotite. This is supported by the abrupt decrease in mean biotite crystal size across the contact, compared to the biotite crystals in the megacrystic granite below. CSD results provide additional evidence for in-situ textural coarsening of biotite. This study proposes a new model for the crystallisation dynamics of the Carna Pluton. During emplacement, 2 - 5 cm alkali-feldspar megacrysts were aligned and fractional crystallisation was the primary mechanism driving the formation of biotite modal layers. Pseudo-sedimentary structures are interpreted to have formed due to the entrainment of biotite crystals within a necessarily highly fluid magma chamber. However, this interpretation is difficult to reconcile with the high viscosities commonly associated with granitic melts. To test this hypothesis, ongoing EPMA analysis on biotite F content and Fe/(Fe+Mg) ratios will assess whether the magma viscosity could have been low enough to produce these features via flow processes; or whether expansion of the pluton and tilting of planar primary magmatic layers, prior to solidification, could be responsible.

Hiding the Evidence: Growth of plutons by incremental emplacement of sheets in crystal mush

NASA Astrophysics Data System (ADS)

Miller, C. F.; Furbish, D. J.; Claiborne, L. L.; Walker, B. A.; Bleick, H. A.; Steinwinder, T. R.; Koteas, G. C.

2006-12-01

Growing evidence supports the notion that plutons are constructed incrementally, commonly over long periods of time, yet field evidence for the multiple injections that seem to be required is commonly sparse or absent (e.g. Glazner et al. 2004). Timescales of up to several million years, among other arguments, indicate that the dominant volume does not remain largely molten, yet if growing plutons are constructed from rapidly solidifying increments it is unlikely that intrusive contacts would escape notice. A model wherein magma increments are emplaced into crystal mush rather than either solid or crystal-poor material provides a plausible explanation for this apparent conundrum. A partially solidified intrusion undoubtedly comprises zones with contrasting melt fraction and therefore strength. The emplacement of dikes that intrude such a strength-zoned intrusion will be guided by the contrasts in the same way that dikes intruding solid media: magma spreads rather than continuing to propagate upward where it encounters a zone of higher rigidity (e.g. experiments by Kavanagh et al. 2006). We propose that ascending magma is in essence trapped by low-strength zones in plutonic mushes that are relatively melt-rich. In many cases, such zones may be subhorizontal and thus sill-like in geometry, but shapes and orientations could be highly variable, depending on the prior history of the composite intrusion. Contacts will commonly be obscure from the start because the contrast between intruding material (crystal-poorer magma) and host (crystal-richer mush) is subtle, and it may be obscured even further by subsequent destabilization of the mush. Field evidence and zircon zoning stratigraphy in plutons of the Colorado River region of southern Nevada support the hypothesis that emplacement of magma replenishments into a mush host is important in pluton construction. Except for highly fractionated dikes and sills, the dominant granite unit of the Spirit Mountain batholith displays only subtle internal contacts. However, ages and elemental zoning in zircons demonstrate a protracted history of almost 2 million years, major fluctuations in T and host melt chemistry, and mixing of strongly contrasting zircon populations in single samples (Walker et al. in press; Claiborne et al. in press). We interpret this to reflect reactivation of mushes and entrainment of earlier-formed crystals, and we infer that this was in response to granitic replenishment. Much of the smaller Aztec Wash pluton comprises interlayered cumulate-textured quartz monzonite and mafic sheets. The latest phase of pluton emplacement is marked by numerous thick granite "sills" that intruded the subhorizontal quartz monzonite sheets. Contacts between granite and quartz monzonite are "soft," highly irregular on cm-dm scale with coarse xenocrysts from the quartz monzonite entrained in the fine-grained granite. We interpret the granite replenishments to have spread laterally within mushy, melt-bearing quartz monzonite, beneath rigid mafic sheets. In this case, clear evidence for the emplacement process is fortuitously preserved because the granite was emplaced in the waning stage of thermal lifetime of the pluton, and because the mafic sheets enhance the strength contrast and make the geometry more visible.

Zircon U-Pb age, Lu-Hf isotope, mineral chemistry and geochemistry of Sundamalai peralkaline pluton from the Salem Block, southern India: Implications for Cryogenian adakite-like magmatism in an aborted-rift

NASA Astrophysics Data System (ADS)

Renjith, M. L.; Santosh, M.; Li, Tang; Satyanarayanan, M.; Korakoppa, M. M.; Tsunogae, T.; Subba Rao, D. V.; Kesav Krishna, A.; Nirmal Charan, S.

2016-01-01

The Sundamalai peralkaline pluton is one among the Cryogenian alkaline plutons occurring in the Dharmapuri Rift Zone (DRZ) of the Salem Block in the Southern Granulite Terrane (SGT) of India. Here we present zircon U-Pb age and Lu-Hf isotopic composition, mineral chemistry and geochemistry of the pluton to explore the petrogenesis and geodynamic implications. Systematic modal variation of orthoclase, Na-plagioclase, Ca-amphibole (ferro-edenite and hastingsite) and quartz developed quartz-monzonite and granite litho units in the Sundamalai pluton. Thermometry based on amphibole-plagioclase pair suggests that the pluton was emplaced and solidified at around 4.6 kbar pressure with crystallization of the major phases between 748 and 661 °C. Estimated saturation temperature of zircon (712-698 °C) is also well within this range. However, apatite saturation occurred at higher temperatures between 835 and 870 °C, in contrast with monazite saturation (718-613 °C) that continued up to the late stage of crystallization. Estimated oxygen fugacity values (log fO2: -14 to -17) indicate high oxidation state for the magma that stabilized titanite and magnetite. The magmatic zircons from Sundamalai pluton yielded a weighted mean 206Pb/238U age of 832.6 ± 3.2 Ma. Geochemically, the Sundamalai rocks are high-K to shoshonitic, persodic (Na2O/K2O ratio > 1), silica-saturated (SiO2:65-72 wt.%), and peralkaline in composition (aluminum saturation index, ASI < 1; Alkalinity index, AI < 0). The initial magma was mildly metaluminous which evolved to strongly peralkaline as result of fractional crystallization (plagioclase effect) controlled differentiation between quartz-monzonite and granite. Both rock types have high content of Na2O (5.1-6.3 wt.%), Ba (350-2589 ppm) and Sr (264-1036 ppm); low content of Y (8.7-17 ppm) and Yb (0.96-1.69 ppm); elevated ratios of La/Yb (11-46) and Sr/Y (46-69) and are depleted in Ti, with a positive Sr anomaly suggesting an adakite-like composition and garnet controlled melting of a plagioclase-poor source. The low content of MgO (<1 wt.%), Cr (7-29 ppm), Ni (6-19 ppm), Sc(2-3 ppm), positive Sr anomaly and predominantly negative zircon εHf(t) values (-10.8 to -9.3 with an average of -10.2) and initial 176Hf/177Hf ratios (0.281947-0.282022) confirm a Paleoproterozoic crustal source. Based on the field and geochemical evidences, we propose that a previously metasomatized mafic lower-crustal source enriched in alkalis has undergone CO2-present partial melting as a result of asthenospheric upwelling beneath an aborted rifting along the DRZ generating the magma that crystallized the Sundamalai rocks. Age of this pluton is comparable with that of the other Cryogenian felsic alkaline plutons from Salem Block suggesting extensive rift-related magmatism at this time in the SGT.

Mantle contribution and tectonic transition in the Aqishan-Yamansu Belt, Eastern Tianshan, NW China: Insights from geochronology and geochemistry of Early Carboniferous to Early Permian felsic intrusions

NASA Astrophysics Data System (ADS)

Du, Long; Long, Xiaoping; Yuan, Chao; Zhang, Yunying; Huang, Zongying; Wang, Xinyu; Yang, Yueheng

2018-04-01

Late Paleozoic is a key period for the accretion and collision of the southern Central Asian Orogenic Belt (CAOB). Here, we present new zircon U-Pb ages, whole-rock geochemistry and Sr-Nd isotopic compositions for four Late Paleozoic felsic plutons in Eastern Tianshan (or Tienshan in some literatures) in order to constrain the tectonic evolution of the southern CAOB. The granodioritic pluton and its dioritic enclaves were synchronously formed in the Early Carboniferous (336 ± 3 Ma and 335 ± 2 Ma, respectively). These rocks are depleted in Nb, Ta and Ti, and enriched in Rb, Ba, Th and U related to the primitive mantle, which show typical features of arc rocks. They both have similar Sr-Nd isotopic ratios to those granitic rocks from the eastern Central Tianshan Block and have the latest Mesoproterozoic two stage Nd model ages (TDM2) (1111-1195 Ma for the granodioritic pluton and 1104-1108 Ma for the enclaves, respectively), indicating that their source magmas may have been derived from the Mesoproterozoic crust. The albitophyric pluton was also emplaced in the Early Carboniferous (333 ± 3 Ma). Rocks of this pluton have similar εNd(t) values (-0.69 to -0.37) and TDM2 ages (1135-1161 Ma) to those of the granodioritic rocks, suggest similar crustal source for both types of rocks. In contrast, the K-feldspar granitic and monzonitic plutons were emplaced in the Early Permian (292 ± 3 Ma and 281 ± 2 Ma, respectively). Samples of the K-feldspar granitic pluton have high K2O + Na2O, FeO/MgO, Ga/Al, HFSE (e.g., Zr and Hf) and low CaO, Sr and Ba, exhibiting characteristics of A2-type granites, which probably emplaced in a post-collisional extension environment. They have higher εNd(t) values (+2.77 to +3.27) and more juvenile TDM2 ages (799-841 Ma) than the Early Carboniferous plutons, suggesting that they were derived from relatively younger crustal sources. The monzonitic granites are metaluminous to weakly peraluminous with A/CNK ranging from 0.93 to 1.05, and have very low P2O5, indicating characteristics of I-type granites. They also have positive εNd(t) values (+2.22 to +2.34) and juvenile TDM2 ages (868-878 Ma), suggesting this pluton was also produced by partial melting of relatively young crustal source. Based on an isotopic mixing simulation, significant mantle contributions were added to the magma source of both the Early Carboniferous and the Early Permian felsic rocks. The mantle contribution changes from 60% in the Early Carboniferous to 75% in the Early Permian. The remarkably increasing of mantle materials in the magma source of the felsic rocks in the Aqishan-Yamansu belt was most likely induced by the tectonic transition from an Early Carboniferous continental arc to an Early Permian post-collisional extension environment.

Monte Carlo modeling of recrystallization processes in α-uranium

DOE PAGES

Steiner, M. A.; McCabe, R. J.; Garlea, E.; ...

2017-08-01

In this study, starting with electron backscattered diffraction (EBSD) data obtained from a warm clock-rolled α-uranium deformation microstructure, a Potts Monte Carlo model was used to simulate static site-saturated recrystallization while testing a number of different conditions for the assignment of recrystallized nuclei within the microstructure. The simulations support observations that recrystallized nuclei within α-uranium form preferentially on non-twin high-angle grain boundary sites at 450 °C, and demonstrate that the most likely nucleation sites on these boundaries can be identified by the surrounding degree of Kernel Average Misorientation (KAM), which may be considered as a proxy for the local geometricallymore » necessary dislocation (GND) density.« less

Dynamic Recrystallization Behavior of Zr-1Sn-0.3Nb Alloy During Hot Rolling Process

NASA Astrophysics Data System (ADS)

Zhao, Siyu; Liu, Huiqun; Lin, Gaoyong; Jiang, Yilan; Xun, Jian

2017-11-01

Zirconium alloys are advanced materials with properties that are greatly affected by their crystalline structure. To investigate this, sheets of Zr-1Sn-0.3Nb alloy were hot rolled with different reductions (10%, 30%, 50%, and 60%) at 1023 K and 1073 K to investigate the alloy's dynamic recrystallization behavior. Recrystallization kinetics was observed via electron backscattering diffraction and transmission electron microscopy, and the results were compared with estimates based on the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation. The values of the JMAK exponent n and k increased with the rolling temperature. The estimates and microstructural observations of dynamic recrystallization (DRX) kinetics were in good agreement.

Characterization of thermoplastic polyimide NEW-TPI

NASA Technical Reports Server (NTRS)

Hou, T. H.; Reddy, R. M.

1991-01-01

Thermal and rheological properties of a commercial thermoplastic polyimide, NEW-TPI, were characterized. The as-received material possesses initially a transient crystallite form with a bimodal distribution in peak melting temperatures. After the meltings of the initial crystallite structures, the sample can be recrystallized by various thermal treatments. A bimodal or single-modal melting peak distribution is formed for annealing temperatures below or above 360 C, respectively. The recrystallized crystallinities are all transient in nature. The polymers are unable to be recrystallized after being subjected to elevated temperature annealing above 450 C. The recrystallization mechanism was postulated, and a simple kinetics model was found to describe the behavior satisfactorily under conditions of prolonged thermal annealing.

Effect of one-step recrystallization on the grain boundary evolution of CoCrFeMnNi high entropy alloy and its subsystems

PubMed Central

Chen, Bo-Ru; Yeh, An-Chou; Yeh, Jien-Wei

2016-01-01

In this study, the grain boundary evolution of equiatomic CoCrFeMnNi, CoCrFeNi, and FeCoNi alloys after one-step recrystallization were investigated. The special boundary fraction and twin density of these alloys were evaluated by electron backscatter diffraction analysis. Among the three alloys tested, FeCoNi exhibited the highest special boundary fraction and twin density after one-step recrystallization. The special boundary increment after one-step recrystallization was mainly affected by grain boundary velocity, while twin density was mainly affected by average grain boundary energy and twin boundary energy. PMID:26923713

The effect of precipitation on the evolution of recrystallization textures in an AA 8011 aluminum alloy sheet

NASA Astrophysics Data System (ADS)

Ryu, Jong-Ho; Lee, Yoon-Soo; Lee, Dong Nyung

2001-06-01

The texture of an AA 8011 aluminum alloy sheet cold rolled by 95% showed a typical β-fiber, which runs from the copper orientation [C={112}<111>] over S [{123}<634>] to brass [B={011}<112>]. The development of annealing textures depended on annealing temperatures due to the interaction between precipitation and recrystallization. Upon annealing at a low temperature of 275°C, precipitation took place before recrystallization. This led to a weak recrystallization texture consisting of {011}<122>, {001˜<100>, and {hk0}<001>, among which the {011}<122> orientation developed near large FeAl3 particles as the main orientation and the cube [{001}<100>] orientation originating from the matrix was relatively weak. After annealing at 350 and 500°C, a strong cube texture developed along with a weak {011}<122> orientation. When the cube orientation developed, the copper orientation disappeared most rapidly. These results were discussed based on the interaction between precipitation and recrystallization.

Microstructure evolution and texture development of hot form-quench (HFQ) AZ31 twin roll cast (TRC) magnesium alloy

NASA Astrophysics Data System (ADS)

Alias, J.; Zhou, X.; Das, Sanjeev; El-Fakir, Omer; Thompson, G. E.

2017-12-01

The present study on the microstructure evolution of hot form-quench (HFQ) AZ31 twin roll cast magnesium alloy attempt to provide an understanding on the grain structure and heterogeneous intermetallic phase formation in the alloy and texture development following the HFQ process. Grain recrystallization and partial dissolution of eutectic β-Mg17Al12 phase particles were occurred during the solution heat treatment at 450°C, leaving the alloy consists of recrystallized grains and discontinuous or random β-Mg17Al12 phase particles distribution with small volume fraction. The particles act as effective nucleation sites for new grains during recrystallization and variation of recrystallization occurrence contributed to texture alteration. The partial or full β-Mg17Al12 phase dissolution following the HFQ induces void formation that act as fracture nucleation site and the corresponding texture alteration in the recrystallized grains led to poor formability in TRC alloy.

Dynamic moisture sorption characteristics of enzyme-resistant recrystallized cassava starch.

PubMed

Mutungi, Christopher; Schuldt, Stefan; Onyango, Calvin; Schneider, Yvonne; Jaros, Doris; Rohm, Harald

2011-03-14

The interaction of moisture with enzyme-resistant recrystallized starch, prepared by heat-moisture treatment of debranched acid-modified or debranched non-acid-modified cassava starch, was investigated in comparison with the native granules. Crystallinities of the powdered products were estimated by X-ray diffraction. Moisture sorption was determined using dynamic vapor sorption analyzer and data fitted to various models. Percent crystallinities of native starch (NS), non-acid-modified recrystallized starch (NAMRS), and acid-modified recrystallized starch (AMRS) were 39.7, 51.9, and 56.1%, respectively. In a(w) below 0.8, sorption decreased in the order NS > NAMRS > AMRS in line with increasing sample crystallinities but did not follow this crystallinity dependence at higher a(w) because of condensation and polymer dissolution effects. Adsorbed moisture became internally absorbed in NS but not in NAMRS and AMRS, which might explain the high resistance of the recrystallized starches to digestion because enzyme and starch cannot approach each other over fairly sufficient surface at the molecular level.

Recrystallization texture in nickel heavily deformed by accumulative roll bonding

NASA Astrophysics Data System (ADS)

Mishin, O. V.; Zhang, Y. B.; Godfrey, A.

2017-07-01

The recrystallization behavior of Ni processed by accumulative roll bonding to a total accumulated von Mises strain of 4.8 has been examined, and analyzed with respect to heterogeneity in the deformation microstructure. The regions near the bonding interface are found to be more refined and contain particle deformation zones around fragments of the steel wire brush used to prepare the surface for bonding. Sample-scale gradients are also observed, manifested as differences between the subsurface, intermediate and central layers, where the distributions of texture components are different. These heterogeneities affect the progress of recrystallization. While the subsurface and near-interface regions typically contain lower frequencies of cube-oriented grains than anywhere else in the sample, a strong cube texture forms in the sample during recrystallization, attributed to both a high nucleation rate and fast growth rate of cube-oriented grains. The observations highlight the sensitivity of recrystallization to heterogeneity in the deformation microstructure and demonstrate the importance of characterizing this heterogeneity over several length scales.

Photoacoustic Imaging.

DTIC Science & Technology

1983-12-01

recrystallization is currently an active area of research. Much effort has been made to grow large grain polysilicon with grain sizes of 100 microns from fine grain... polysilicon using laser recrystallization. The recrystallization process is inherently traumatic, producing large changes in temperature in short...temperature distribution above as the source term in the acoustic field equation, we ol fain r where B1)jwP) The general solution to this equation is given by

A quasi-in-situ EBSD observation of the transformation from rolling texture to recrystallization texture in V-4Cr-4Ti alloy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peng, Lixia

Recrystallization texture evolution of rolled V-4Cr-4Ti alloy has been investigated by quasi-in-situ EBSD (electron back-scattering diffraction) method. Concurrently, the precipitates were characterized by SEM (Scanning Electron Microscopy). It was found that both the initial rolling textures and the distribution of the precipitates affected the formation of the recrystallization texture. It was revealed that the texture transformations of (558) 〈110〉 + (665) 〈110〉 to (334) 〈483〉 + (665) 〈1 1 2.4〉 were possibly attributed to the selective drag induced by the sparsely dispersed Ti-rich precipitates. While the densely distributed Ti-rich precipitates were responsible for the randomized recrystallization texture. Finally, when themore » precipitates were absent, the orientation changes from (112) 〈110〉 and (558) 〈110〉 to (111) 〈112〉 and (001) <110> to (001) <520> were observed. - Highlights: • Micro recrystallization texture evolution in V-4Cr-4Ti alloys is reported for the first time. • The volume fraction of Ti-rich precipitates has significant effect on the recrystallization texture evolution. • The dissolution of the Ti-rich precipitates above 1100 °C induces the strengthening of (111) <112> texture.« less

In-situ observation of recrystallization in an AlMgScZr alloy using confocal laser scanning microscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taendl, J., E-mail: johannes.taendl@tugraz.atl; Nambu, S.; Orthacker, A.

2015-10-15

In this work we present a novel in-situ approach to study the recrystallization behavior of age hardening alloys. We use confocal laser scanning microscopy (CLSM) at 400 °C to investigate the static recrystallization of an AlMg4Sc0.4Zr0.12 alloy in-situ. The results are combined with electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM) analyses. It was found that CLSM is a powerful tool to visualize both the local initiation and temporal sequence of recrystallization. After fast nucleation and initial growth, the grain growth rate decreases and the grain boundary migration stops after some minutes due to Zener pinning from Al{sub 3}(Sc,Zr)more » precipitates produced during the heat treatment. EBSD and TEM analyses confirm both the boundary movements and the particle-boundary interactions. - Highlights: • First time that CLSM is used to study recrystallization in-situ. • The start and end of recrystallization can be directly observed. • The procedure is easy to apply and requires only simple data interpretation. • In-situ observations on the surface correlate to modifications inside the bulk. • In-situ observations correlate to EBSD and EFTEM analyses.« less

A Comparative Study on the Static Recrystallization Behavior of Cold-Rolled Mg-3Al-1Zn Alloy Stimulated by Electropulse Treatment and Conventional Heat Treatment

NASA Astrophysics Data System (ADS)

Li, Xiaopei; Li, Xiaohui; Kure-Chu, Song-Zhu; Tang, Guoyi

2017-12-01

Cold-rolled AZ31 Mg alloy strips, with a reduction of 33 pct, were subjected to electropulse treatment (EPT) and conventional heat treatment (HT) to evaluate the respective influences of electropulses and temperature on the recrystallization behavior of AZ31. The highest measured temperature during the EPT (543 K) was used in HT. The electron backscattered diffraction results demonstrated that the EPT-stimulated recrystallization was completed within 8 seconds, whereas for HT, recrystallization was still far from completion even after 240 seconds. It was found that both the nucleation and grain growth of these two processes were totally different. In the EPT samples, nucleation tended to occur preferentially near extension twin boundaries and grain boundaries by continuous recrystallization, whereas in the HT samples, nucleation occurred mainly by grain boundaries bulging via discontinuous recrystallization. As grain growth proceeded, the texture intensities of the EPT samples decreased gradually and finally evolved into an obvious transverse-direction-split texture. This is likely attributable to the impact of electropulses on the boundary energy and the contribution of nonbasal dislocations; however, the basal-type textures of the HT samples were notably strengthened, which is associated with a 30 deg〈0001〉 orientation with respect to the deformed texture.

A Comparative Study on the Static Recrystallization Behavior of Cold-Rolled Mg-3Al-1Zn Alloy Stimulated by Electropulse Treatment and Conventional Heat Treatment

NASA Astrophysics Data System (ADS)

Li, Xiaopei; Li, Xiaohui; Kure-Chu, Song-Zhu; Tang, Guoyi

2018-02-01

Cold-rolled AZ31 Mg alloy strips, with a reduction of 33 pct, were subjected to electropulse treatment (EPT) and conventional heat treatment (HT) to evaluate the respective influences of electropulses and temperature on the recrystallization behavior of AZ31. The highest measured temperature during the EPT (543 K) was used in HT. The electron backscattered diffraction results demonstrated that the EPT-stimulated recrystallization was completed within 8 seconds, whereas for HT, recrystallization was still far from completion even after 240 seconds. It was found that both the nucleation and grain growth of these two processes were totally different. In the EPT samples, nucleation tended to occur preferentially near extension twin boundaries and grain boundaries by continuous recrystallization, whereas in the HT samples, nucleation occurred mainly by grain boundaries bulging via discontinuous recrystallization. As grain growth proceeded, the texture intensities of the EPT samples decreased gradually and finally evolved into an obvious transverse-direction-split texture. This is likely attributable to the impact of electropulses on the boundary energy and the contribution of nonbasal dislocations; however, the basal-type textures of the HT samples were notably strengthened, which is associated with a 30 deg〈0001〉 orientation with respect to the deformed texture.

Cube texture formation during the early stages of recrystallization of Al-1%wt.Mn and AA1050 aluminium alloys

NASA Astrophysics Data System (ADS)

Miszczyk, M. M.; Paul, H.

2015-08-01

The cube texture formation during primary recrystallization was analysed in plane strain deformed samples of a commercial AA1050 alloy and an Al-1%wt.Mn model alloy single crystal of the Goss{110}<001> orientation. The textures were measured with the use of X-ray diffraction and scanning electron microscopy equipped with an electron backscattered diffraction facility. After recrystallization of the Al-1%wt.Mn single crystal, the texture of the recrystallized grains was dominated by four variants of the S{123}<634> orientation. The cube grains were only sporadically detected by the SEM/EBSD system. Nevertheless, an increased density of <111> poles corresponding to the cube orientation was observed. The latter was connected with the superposition of four variants of the S{123}<634> orientation. This indicates that the cube texture after the recrystallization was a ‘compromise texture’. In the case of the recrystallized AA1050 alloy, the strong cube texture results from both the increased density of the particular <111> poles of the four variants of the S orientation and the ∼40°(∼< 111>)-type rotation. The first mechanism transforms the Sdef-oriented areas into Srex ones, whereas the second the near S-oriented, as-deformed areas into near cube-oriented grains.

Influence of Heating Rate on Ferrite Recrystallization and Austenite Formation in Cold-Rolled Microalloyed Dual-Phase Steels

NASA Astrophysics Data System (ADS)

Philippot, C.; Bellavoine, M.; Dumont, M.; Hoummada, K.; Drillet, J.; Hebert, V.; Maugis, P.

2018-01-01

Compared with other dual-phase (DP) steels, initial microstructures of cold-rolled martensite-ferrite have scarcely been investigated, even though they represent a promising industrial alternative to conventional ferrite-pearlite cold-rolled microstructures. In this study, the influence of the heating rate (over the range of 1 to 10 K/s) on the development of microstructures in a microalloyed DP steel is investigated; this includes the tempering of martensite, precipitation of microalloying elements, recrystallization, and austenite formation. This study points out the influence of the degree of ferrite recrystallization prior to the austenite formation, as well as the importance of the cementite distribution. A low heating rate giving a high degree of recrystallization, leads to the formation of coarse austenite grains that are homogenously distributed in the ferrite matrix. However, a high heating rate leading to a low recrystallization degree, results in a banded-like structure with small austenite grains surrounded by large ferrite grains. A combined approach, involving relevant multiscale microstructural characterization and modeling to rationalize the effect of the coupled processes, highlights the role of the cold-worked initial microstructure, here a martensite-ferrite mixture: recrystallization and austenite formation commence in the former martensite islands before extending in the rest of the material.

Investigation of the Atypical Glass Transition and Recrystallization Behavior of Amorphous Prazosin Salts

PubMed Central

Kumar, Lokesh; Popat, Dharmesh; Bansal, Arvind K.

2011-01-01

This manuscript studied the effect of counterion on the glass transition and recrystallization behavior of amorphous salts of prazosin. Three amorphous salts of prazosin, namely, prazosin hydrochloride, prazosin mesylate and prazosin tosylate were prepared by spray drying, and characterized by optical-polarized microscopy, differential scanning calorimetry and powder X-ray diffraction. Modulated differential scanning calorimetry was used to determine the glass transition and recrystallization temperature of amorphous salts. Glass transition of amorphous salts followed the order: prazosin mesylate > prazosin tosylate ∼ prazosin hydrochloride. Amorphous prazosin mesylate and prazosin tosylate showed glass transition, followed by recrystallization. In contrast, amorphous prazosin hydrochloride showed glass transition and recrystallization simultaneously. Density Functional Theory, however, suggested the expected order of glass transition as prazosin hydrochloride > prazosin mesylate > prazosin tosylate. The counterintuitive observation of amorphous prazosin hydrochloride having lower glass transition was explained in terms of its lower activation energy (206.1 kJ/mol) for molecular mobility at Tg, compared to that for amorphous prazosin mesylate (448.5 kJ/mol) and prazosin tosylate (490.7 kJ/mol), and was further correlated to a difference in hydrogen bonding strength of the amorphous and the corresponding recrystallized salts. This study has implications in selection of an optimal amorphous salt form for pharmaceutical development. PMID:24310595

Investigation of the atypical glass transition and recrystallization behavior of amorphous prazosin salts.

PubMed

Kumar, Lokesh; Popat, Dharmesh; Bansal, Arvind K

2011-08-25

This manuscript studied the effect of counterion on the glass transition and recrystallization behavior of amorphous salts of prazosin. Three amorphous salts of prazosin, namely, prazosin hydrochloride, prazosin mesylate and prazosin tosylate were prepared by spray drying, and characterized by optical-polarized microscopy, differential scanning calorimetry and powder X-ray diffraction. Modulated differential scanning calorimetry was used to determine the glass transition and recrystallization temperature of amorphous salts. Glass transition of amorphous salts followed the order: prazosin mesylate > prazosin tosylate ~ prazosin hydrochloride. Amorphous prazosin mesylate and prazosin tosylate showed glass transition, followed by recrystallization. In contrast, amorphous prazosin hydrochloride showed glass transition and recrystallization simultaneously. Density Functional Theory, however, suggested the expected order of glass transition as prazosin hydrochloride > prazosin mesylate > prazosin tosylate. The counterintuitive observation of amorphous prazosin hydrochloride having lower glass transition was explained in terms of its lower activation energy (206.1 kJ/mol) for molecular mobility at Tg, compared to that for amorphous prazosin mesylate (448.5 kJ/mol) and prazosin tosylate (490.7 kJ/mol), and was further correlated to a difference in hydrogen bonding strength of the amorphous and the corresponding recrystallized salts. This study has implications in selection of an optimal amorphous salt form for pharmaceutical development.

Inhibition of Recrystallization of Amorphous Lactose in Nanocomposites Formed by Spray-Drying.

PubMed

Hellrup, Joel; Alderborn, Göran; Mahlin, Denny

2015-11-01

This study aims at investigating the recrystallization of amorphous lactose in nanocomposites. In particular, the focus is on the influence of the nano- to micrometer length scale nanofiller arrangement on the amorphous to crystalline transition. Further, the relative significance of formulation composition and manufacturing process parameters for the properties of the nanocomposite was investigated. Nanocomposites of amorphous lactose and fumed silica were produced by co-spray-drying. Solid-state transformation of the lactose was studied at 43%, 84%, and 94% relative humidity using X-ray powder diffraction and microcalorimetry. Design of experiments was used to analyze spray-drying process parameters and nanocomposite composition as factors influencing the time to 50% recrystallization. The spray-drying process parameters showed no significant influence. However, the recrystallization of the lactose in the nanocomposites was affected by the composition (fraction silica). The recrystallization rate constant decreased as a function of silica content. The lowered recrystallization rate of the lactose in the nanocomposites could be explained by three mechanisms: (1) separation of the amorphous lactose into discrete compartments on a micrometer length scale (compartmentalization), (2) lowered molecular mobility caused by molecular interactions between the lactose molecules and the surface of the silica (rigidification), and/or (3) intraparticle confinement of the amorphous lactose. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

Preparation and recrystallization behavior of spray-dried co-amorphous naproxen-indomethacin.

PubMed

Beyer, Andreas; Radi, Lydia; Grohganz, Holger; Löbmann, Korbinian; Rades, Thomas; Leopold, Claudia S

2016-07-01

To improve the dissolution properties and the physical stability of amorphous active pharmaceutical ingredients, small molecule stabilizing agents may be added to prepare co-amorphous systems. The objective of the study was to investigate if spray-drying allows the preparation of co-amorphous drug-drug systems such as naproxen-indomethacin and to examine the influence of the process conditions on the resulting initial sample crystallinity and the recrystallization behavior of the drug(s). For this purpose, the process parameters inlet temperature and pump feed rate were varied according to a 2(2) factorial design and the obtained samples were analyzed with X-ray powder diffractometry and Fourier-transformed infrared spectroscopy. Evaluation of the data revealed that the preparation of fully amorphous samples could be achieved depending on the process conditions. The resulting recrystallization behavior of the samples, such as the total recrystallization rate, the individual recrystallization rates of naproxen and indomethacin as well as the polymorphic form of indomethacin that was formed were influenced by these process conditions. For initially amorphous samples, it was found that naproxen and indomethacin recrystallized almost simultaneously, which supports the theory of formation of drug-drug heterodimers in the co-amorphous phase. Copyright © 2016 Elsevier B.V. All rights reserved.

Effects of rolling conditions on recrystallization microstructure and texture in magnetostrictive Fe-Ga-Al rolled sheets

NASA Astrophysics Data System (ADS)

Li, Jiheng; Liu, Yangyang; Li, Xiaojuan; Mu, Xing; Bao, Xiaoqian; Gao, Xuexu

2018-07-01

The effects of different rolling conditions on the microstructure and texture of primary and secondary recrystallization in magnetostrictive Fe82Ga9Al9+0.1at%NbC alloy sheets were investigated. After the primary recrystallization annealing at 850 °C for 5 min, the as-rolled sheets prepared by warm-cold rolling with an intermediate annealing, can be fully recrystallized, and obtain the homogeneous matrix in which the fine dispersed NbC precipitate particles are distributed. The primary recrystallization textures of sheets with different rolling conditions consist mostly of strong {1 0 0} textures, γ-fiber textures, {4 1 1}〈1 4 8〉 texture and weak Goss texture. In the primary recrystallized sheets prepared by warm-cold rolling with an intermediate annealing, the high energy grain boundaries and ∑9 boundaries have the highest proportion. After high temperature annealing, the secondary recrystallizations of Goss grains in these sheets are more complete, and the size of abnormal grown Goss grain is up to several centimeters, which results in the strongest Goss texture. Correspondingly, the largest magnetostriction of 183 ppm is observed. The sample prepared by warm-cold rolling with an intermediate annealing, has homogeneous primary matrix, special texture components and grain boundary distribution, all of which provide a better surrounding for the abnormal growth of Goss grains. This work indicates that the control of rolling conditions of Fe-Ga-Al alloy sheets is necessary to achieve the strong Goss texture and obtain a possible high magnetostriction if other appropriate conditions (stress, domain structure) are achieved.

Surface damage and structure evolution of recrystallized tungsten exposed to ELM-like transient loads

NASA Astrophysics Data System (ADS)

Yuan, Y.; Du, J.; Wirtz, M.; Luo, G.-N.; Lu, G.-H.; Liu, W.

2016-03-01

Surface damage and structure evolution of the full tungsten ITER divertor under transient heat loads is a key concern for component lifetime and plasma operations. Recrystallization caused by transients and steady-state heat loads can lead to degradation of the material properties and is therefore one of the most serious issues for tungsten armor. In order to investigate the thermal response of the recrystallized tungsten under edge localized mode-like transient thermal loads, fully recrystallized tungsten samples with different average grain sizes are exposed to cyclic thermal shocks in the electron beam facility JUDITH 1. The results indicate that not only does the microstructure change due to recrystallization, but that the surface residual stress induced by mechanical polishing strongly influences the surface cracking behavior. The stress-free surface prepared by electro-polishing is shown to be more resistant to cracking than the mechanically polished one. The resulting surface roughness depends largely on the loading conditions instead of the recrystallized-grain size. As the base temperature increases from room temperature to 400 °C, surface roughening mainly due to the shear bands in each grain becomes more pronounced, and sub-grains (up to 3 μm) are simultaneously formed in the sub-surface. The directions of the shear bands exhibit strong grain-orientation dependence, and they are generally aligned with the traces of {1 1 2} twin habit planes. The results suggest that twinning deformation and dynamic recrystallization represent the predominant mechanism for surface roughening and related microstructure evolution.

Improvement of physicomechanical properties of carbamazepine by recrystallization at different pH values.

PubMed

Javadzadeh, Yousef; Mohammadi, Ameneh; Khoei, Nazaninossadat Seyed; Nokhodchi, Ali

2009-06-01

The morphology of crystals has an appreciable impact role on the physicochemical properties of drugs. Drug properties such as flowability, dissolution, hardness and bioavailability may be affected by crystallinity behaviours of drugs. The objective of this study was to achieve an improved physicomechanical property of carbamazepine powder through recrystallization from aqueous solutions at different pH values. For this purpose, carbamazapine was recrystallized from aqueous solutions at different pH values (1, 7, 11). The morphology of crystals was investigated using scanning electron microscopy; X-ray powder diffraction (XRPD) was used to identify polymorphism; thermodynamic properties were analyzed using differential scanning calorimetery (DSC). Dissolution rate was determined using USP dissolution apparatus. Mechanical behavior of recrystallized carbamazepine powders was investigated by making tablets under different compaction pressure and measuring their hardness. SEM studies showed that the carbamazepine crystallization in different media affected the morphology and size of carbamazepine crystals. The shape of carbamazepine crystals changed from flaky or thin plate-like to needle shape. XRPD and DSC results ruled out any crystallinity changes occurring due to the temperature during recrystallization procedure or pH of crystallization media. The crushing strength of tablets indicated that all of the recrystallized carbamazepine samples had better compactiblity than the original carbamazepine powder. In vitro dissolution studies of carbamazepine samples showed a higher dissolution rate for carbamazepine crystals obtained from media with pH 11 and 1. Carbamazepine particles recrystallized from aqueous solutions of different pH values (all media) appeared to have superior mechanical properties to those of the original carbamazepine sample.

Two-step recrystallization of water in concentrated aqueous solution of poly(ethylene glycol).

PubMed

Gemmei-Ide, Makoto; Motonaga, Tetsuya; Kasai, Ryosuke; Kitano, Hiromi

2013-02-21

Crystallization behavior of water in a concentrated aqueous solution of poly(ethylene glycol) (PEG) with a water content of 37.5 wt % was investigated by temperature variable mid-infrared (mid-IR) spectroscopy in a temperature range of 298-170 K. The mid-IR spectrum of water at 298 K showed that a large water cluster was not formed and that most of the water molecules were associated with the PEG chain. Ice formation, however, occurred as found in previous studies by differential scanning calorimetory. Ice formations were grouped into three types: crystallization at 231 K during cooling, that at 198 K during heating, and that at 210 K during heating. The latter two were just recrystallization. These ice formations were the direct transition from hydration species to ice without condensation regardless of crystallization or recrystallization. This means that the recrystallized water in the present system was not generated from low-density amorphous solid water. At a low cooling rate, nearly complete crystallization at 231 K during cooling and no recrystallization were observed. At a high cooling rate, no crystallization and two-step recrystallization at 198 and 210 K were observed. The former and latter recrystallizations were found to be generated from water associated with the PEG chains with ttg (the sequence -O-CH(2)-CH(2)-O- having a trans (t) conformation about the -C-O- bond and a gauche (g) conformation about the -C-C- bond) and random conformations, respectively. These results indicate that recrystallizable water does not have a single specific water structure.

Deformation Mechanism and Recrystallization Relationships in Galfenol Single Crystals: On the Origin of Goss and Cube Orientations

NASA Astrophysics Data System (ADS)

Na, Suok-Min; Smith, Malcolm; Flatau, Alison B.

2018-06-01

In this work, deformation mechanism related to recrystallization behavior in single-crystal disks of Galfenol (Fe-Ga alloy) was investigated to gain insights into the influence of crystal orientations on structural changes and selective grain growth that take place during secondary recrystallization. We started with the three kinds of single-crystal samples with (011)[100], (001)[100], and (001)[110] orientations, which were rolled and annealed to promote the formation of different grain structures and texture evolutions. The initial Goss-oriented (011)[100] crystal mostly rotated into {111}<112> orientations with twofold symmetry and shear band structures by twinning resulted in the exposure of rolled surface along {001}<110> orientation during rolling. In contrast, the Cube-oriented (001)[100] single crystal had no change in texture during rolling with the thickness reduction up to 50 pct. The {123}<111> slip systems were preferentially activated in these single crystals during deformation as well as {112}<111> slip systems that are known to play a role in primary slip of body-centered cubic (BCC) materials such as α-iron and Fe-Si alloys. After annealing, the deformed Cube-oriented single crystal had a small fraction (<10 pct) of recrystallized Goss-oriented grains. The weak Goss component remained in the shear bands of the 50 pct rolled Goss-oriented single crystal, and it appeared to be associated with coalescence of subgrains inside shear band structures during primary recrystallization. Rolling of the (001)[110] single crystal led to the formation of a tilted (001)[100] component close to the <120> orientation, associated with {123}<111> slip systems as well. This was expected to provide potential sites of nucleation for secondary recrystallization; however, no Goss- and Cube-oriented components actually developed in this sample during secondary recrystallization. Those results illustrated how the recrystallization behavior can be influenced by deformed structure and the slip systems.

Evolution of microstructure and grain boundary character distribution of a tin bronze annealed at different temperatures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Weijiu; Chongqing Municipal Key Laboratory of Institutions of Higher Education for Mould Technology, Chongqing University of Technology, Chongqing 400054; Chai, Linjiang, E-mail: chailinjiang@cqut.edu.cn

2016-04-15

Specimens cut from a rolled tin bronze sheet were annealed at 400–800 °C for 1 h and evolution of their microstructures was then characterized in details by electron channeling contrast imaging and electron backscatter diffraction techniques. Particularly, statistics on special boundaries (SBs) with Σ ≤ 29 and network connectivity of random high angle boundaries (HABs) in the annealed specimens were examined to probe optimization potentials of grain boundary character distribution (GBCD) for this material. Results show that the deformed microstructure in the as-received material begins to be recrystallized when the annealing temperature increase to 500 °C and average grain sizesmore » surge with further increasing temperatures. As a result of the recrystallization, a large number of annealing twins (with Σ3 misorientation) are produced, leading to remarkably increased fractions of SBs (f{sub SBs}). Thanks to preexisting dense low angle boundaries, the majority of SBs in the 500 °C specimen with only partial recrystallization are Σ3{sub ic} (incoherent) boundaries, which effectively disrupt connectivity of random HABs network. Although the f{sub SBs} can be further increased (up to 72.5%) in specimens with full recrystallization (at higher temperatures), the Σ3{sub ic} boundaries would be replaced to some extent by Σ3{sub c} (coherent) boundaries which do not contribute directly to optimizing the GBCD. This work should be able to provide clear suggestions on applying the concept of grain boundary engineering to tin bronze alloys. - Highlights: • The rolled tin bronze begins to be recrystallized as temperature increases to 500 °C. • A lot of SBs are produced after recrystallization and the highest f{sub SBs} is 72.5%. • Partially recrystallized specimen has the optimum GBCD due to more Σ3{sub ic} boundaries. • The Σ3{sub ic} boundaries are replaced by Σ3{sub c} boundaries after full recrystallization.« less

User-independent EBSD parameters to study the progress of recovery and recrystallization in Cu-Zn alloy during in situ heating.

PubMed

Sharma, N K; Shekhar, S

2016-12-01

Microstructural evolution of cold-rolled Cu-5%Zn alloy during in situ heating inside field-emission scanning electron microscope was utilized to obtain user-independent parameters in order to trace the progress of static recovery and recrystallization. Electron back-scattered diffraction (EBSD)-based orientation imaging microscopy was used to obtain micrographs at various stages of in situ heating. It is shown that unlike the pre-existing methods, additional EBSD-based parameter can be used to trace the progress of recovery and recrystallization, which is not dependent on user input and hence less prone to error. True strain of 0.3 was imposed during cold rolling of alloy sample. Rolled sample was subjected to in situ heating from room temperature to 500°C (∼0.58 Tm) with soaking time of 10 min, at each of the intermediate temperatures viz. 100, 200, 300, 400 and 450°C. After reaching 500°C, the sample was kept at this temperature for a maximum duration of around 15 h. The sample showed clear signs of recovery for temperature up to 450°C, and at 500°C, recrystallization started to take place. Recrystallization kinetics was moderate, and full recrystallization was achieved in approximately 120 min. We found that EBSD parameter, namely, band contrast intensity can be used as an extra handle to map out the progress of recrystallization occurring in the sample. By contrast, mean angular deviation can be used to understand the evolution of recovery in samples. The parameters mentioned in the current study, unlike other pre-existing methods, can also be used for mapping local microstructural transformations due to recovery and recrystallization. We discuss the benefits and limitations in using these additional handles in understanding the changes taking place in the material during in situ heating. © 2016 The Authors Journal of Microscopy © 2016 Royal Microscopical Society.

K-Ar chronology and geochemistry of the Miocene magmatism of Collo-Bougaroun and Edough-Cap de Fer areas (NE Algeria). Temporal constraints on geodynamic evolution of the Eastern Algerian margin between 6° and 8°E

NASA Astrophysics Data System (ADS)

Abbassene, F.; Bellon, H.; Chazot, G.; Ouabadi, A.

2013-12-01

The ''Petite Kabylie'' corresponds to the eastern Algerian coastal magmatic chain outcropping from Jijel to the west, up to the plain of Annaba to the east. In this area, the Collo-Bougaroun volcano-plutonic complex, of ca. 300 km2, comprises (1) granular rocks, mainly cordierite bearing peraluminous granites, (2) gabbros that occur at the northern and southern parts of Cap Bougaroun pluton where they are associated with ultramafic rocks and form the layered complex of Yadene?; (3) microgranular rocks, mainly microgranites, that outcrop at the eastern part of the Bougaroun pluton, in Collo basin and El Milia, microdiorites in Bouserdoum and some doleritic or microgabbroic metric veins at Cap Bougaroun and (4) of rhyolitic lava in Kef Cheraïa. The Bougaroun complex form a huge elliptical batholite along a major axis of 20km oriented ENE- WSW that intrudes serpentinized peridotites and kinzigites of the Bougaroun basement to the east. This granitic pluton gives time constraints as it induces deformation and contact metamorphism of the Oligo-Miocene Kabyle sediments of Collo-Oued Zhour basin in the south. These sediments reach the Upper Burdigalien which suggests that the lower limit of emplacement of this granite is coeval at least with this age. The majority of these magmatic rocks show subalkaline affinity with strong enrichment (0.13 to 4.13 %) in K2O during fractionation to calc-alkaline and high-K calc-alkaline affinity for the most differentiated rocks. The felsic rocks (granites, microgranites and rhyolites) are marked by a significant crustal contamination (ξNd = -10, I Sr = 0.720, δ18O = +12 ‰ [1], [2]) during their petrogenesis. However, the presence of basic rocks (gabbros and dolerites) that are depleted in K2O (0.13 to 0.44%) provides information on mantle composition and origin of magmas. The geochemical data on these rocks are discussed in the very particular geodynamic context of the northern Algerian margin.Twenty-four 40K-40Ar analyses were performed on whole rock and separated grain minerals (biotite, quartz and feldspar) from some granites. Grains were chosen in 150-300 μm separates. The obtained results from mineral separates from the granites and gabbros scatter between 21 and 16 Ma. These results appear older compared to field observations that fixe the age of pluton intrusion around 16-17 Ma. Several assumptions are made on the possible origin of the possible excess argon, particularly during crustal contamination of magmas and differentiation processes. Syn-late or post-magmatic hydrothermal alteration is also considered. The Chetaïbi-Cap Fer area shows mafic (gabbro, basalt), intermediate (diorite) and felsic rocks (microgranite and rhyolite) that were emplaced either as lava-flows, sills, dykes or laccoliths intruding Miocene sediments. 14 samples were dated by K/Ar whole rock method and in some cases biotite and quartz & feldspar separates. The results show three groups: between 16 and 15Ma, about 14Ma and about 13Ma. We consider that three distinct magmatic events are responsible for their emplacement.These results agree well with the overall geodynamic context of Algerian margin which was structured during three tangential tectonic events, dated respectively 17 Ma, 15 Ma and 9 Ma.

Petrology of Teofilândia granitoids: An example of 2.1 Ga crustal accretion in the São Francisco Craton (Bahia, Brazil)

NASA Astrophysics Data System (ADS)

Nascimento, H. S.; Nédélec, Anne; Bouchez, Jean-Luc

2017-07-01

Teofilândia granitoids are representative of the Paleoproterozoic plutonic rocks, which intruded the Serrinha block, an Archean crustal fragment of the Sao Francisco Craton (Bahia, Brazil). Three plutons were emplaced, the Teofilândia granodiorite, the Barrocas trondhjemite and the Santa Rosa granite, respectively dated at 2130, 2127 and 2073 Ma. The two first plutons are calc-alkaline rocks following a trondhjemitic trend. They resemble Archean TTGs (tonalites-trondhjemites-granodiorites) by their major and trace element compositions and especially by their fractionated REE patterns, with very low HREE contents. These juvenile magmas resulted from partial melting of a young mafic protolith, likely represented by the nearby Rio Itapicuru greenstone belt. Barrocas trondhjemite and Teofilândia granodiorite derive from similar sources, possibly at different depths and with a different degree of melting. The rocks were deformed at high temperature during the Trans-Amazonian collision and are therefore pre-collisional and ascribed to a subduction stage. The younger Santa Rosa pluton is a small, syn-to post-collisional granite that derived from anatexis of the Archean crust. It is representative of a second, volumetrically minor, plutonic episode of potassic, shoshonitic or alkaline affinities. The large amount of 2.1 Ga granitoids emplaced in Brazil as well as in the West African craton, suggests that, at that time, a global event of possible mantle origin was responsible for the intense magmatic activity that involved both crustal accretion and crustal reworking in many places of the world.

Effect of Aluminum on the Microstructure and Properties of Two Refractory High-Entropy Alloys (Postprint)

DTIC Science & Technology

2014-04-01

The chemical compositions of the recrystallized ic release; distribution unlimited. Fig. 5. (a) Equiaxed grain structure of the annealed...deformation bands crossing a grain boundary; (c) fine recrystallized grains formed at grain boundaries; (d) a higher magnification image shows the...presence of nano-precipitates at the boundaries of the recrystallized grains. 220 O.N. Senkov et al. / Acta Materialia 68 (2014) 214–228and non

Research and Process-Optimization on Mixed Crystal Caused Uneven-Performance of High-strength Structural Car Steel QStE500TM

NASA Astrophysics Data System (ADS)

Jian-wen, Li; Hong-yan, Liu

Handan Iron and Steel production of high-strength structural car steel QStE500TM thin gauge products using Nb + Ti composite strengthening, with a small amount of Cr element to improve its hardenability, the process parameter control is inappropriate with Nb + Ti complex steel, it is easy to produce in the mixed crystal phenomenon, resulting in decreasing the toughness and uneven performance. In this paper, Gleeble 3500 thermal simulation testing machine for high-strength structural steel car QStE500TM product deformation austenite recrystallization behavior research, determined completely recrystallized, partial recrystallization and non-recrystallization region, provide theoretical basis and necessary data for reasonable controlled rolling process for production.

Ice-Active Substances from the Infective Juveniles of the Freeze Tolerant Entomopathogenic Nematode, Steinernema feltiae.

PubMed

Ali, Farman; Wharton, David A

2016-01-01

Steinernema feltiae is a moderately freezing tolerant nematode, that can withstand intracellular ice formation. We investigated recrystallization inhibition, thermal hysteresis and ice nucleation activities in the infective juveniles of S. feltiae. Both the splat cooling assay and optical recrystallometry indicate the presence of ice active substances that inhibit recrystallization in the nematode extract. The substance is relatively heat stable and largely retains the recrystallization inhibition activity after heating. No thermal hysteresis activity was detected but the extract had a typical hexagonal crystal shape when grown from a single seed crystal and weak ice nucleation activity. An ice active substance is present in a low concentration, which may be involved in the freezing survival of this species by inhibiting ice recrystallization.

Krasnotur'insk Skarn copper ore field, Northern Urals: The U-Pb age of ore-controlling diorites and their place in the regional metallogeny

NASA Astrophysics Data System (ADS)

Grabezhev, A. I.; Ronkin, Yu. L.; Puchkov, V. N.; Gerdes, A.; Rovnushkin, M. Yu.

2014-06-01

The Krasnotur'insk skarn copper ore field known from the theoretical works of Academician K.S. Korzhinskii is located in the western part of the Tagil volcanic zone (in the area of the town of Krasnotur'insk). The ore field is composed of layered Devonian (Emsian) volcanosedimentary rocks intruded by small plutons of quartz diorites, diorites, and gabbrodiorites. Widespread pre-ore and intra-ore dikes of similar composition control the abundance of the andradite skarns formed after limestones and the magnetitesulfide and sulfide ore bodies formed after skarns. The LA-ICP-MS U-Pb concordant age of zircon from the quartz diorite of the Vasil'evsko-Moskalevskii pluton calculated by 16 analyses (16 crystals) is 407.7 ± 1.6 Ma (MSWD = 1.5). Taking into account the geological and petrogeochemical similarity of diorites of small plutons and intra-ore dikes, it is assumed that this age corresponds to the period of formation of the ore-magmatic system of the Krasnotur'insk skarn copper ore field. It was probably formed somewhat earlier than the Auerbakh montzonitic pluton and the accompanying skarn magnetite deposits in the south.

Tectono-metamorphic evolution of high-P/T and low-P/T metamorphic rocks in the Tia Complex, southern New England Fold Belt, eastern Australia: Insights from K-Ar chronology

NASA Astrophysics Data System (ADS)

Fukui, Shiro; Tsujimori, Tatsuki; Watanabe, Teruo; Itaya, Tetsumaru

2012-10-01

The Tia Complex in the southern New England Fold Belt is a poly-metamorphosed Late Paleozoic accretionary complex. It consists mainly of high-P/low-T type pumpellyite-actinolite facies (rare blueschist facies) schists, phyllite and serpentinite (T = 300 °C and P = 5 kbar), and low-P/high-T type amphibolite facies schist and gneiss (T = 600 °C and P < 5 kbar) associated with granodioritic plutons (Tia granodiorite). White mica and biotite K-Ar ages distinguish Carboniferous subduction zone metamorphism and Permian granitic intrusions, respectively. The systematic K-Ar age mapping along a N-S traverse of the Tia Complex exhibits a gradual change. The white mica ages become younger from the lowest-grade zone (339 Ma) to the highest-grade zone (259 Ma). In contrast, Si content of muscovite changes drastically only in the highest-grade zone. The regional changes of white mica K-Ar ages and chemical compositions of micas indicate argon depletion from precursor high-P/low-T type phengitic white mica during the thermal overprinting and recrystallization by granitoids intrusions. Our new K-Ar ages and available geological data postulate a model of the eastward rollback of a subduction zone in Early Permian. The eastward shift of a subduction zone system and subsequent magmatic activities of high-Mg andesite and adakite might explain formation of S-type granitoids (Hillgrove suite) and coeval low-P/high-T type metamorphism in the Tia Complex.

Lu/Hf dating of garnet constrains timing of metamorphism and deformation, Prince Rupert Area, British Columbia

NASA Astrophysics Data System (ADS)

Wolf, D. E.; Andronicos, C. L.; Vervoort, J. D.; Mansfield, M.

2008-12-01

We present new Lu-Hf garnet ages that constrain the timing of deformation and metamorphism in the Western Metamorphic Belt (WMB), near Prince Rupert, British Columbia. We examined four samples of grt- bearing schist collected within the aureole to the Ecstall Pluton in the WMB. Garnets were separated from these rocks and dated using the Lu-Hf method at Washington State University. We determined geologically meaningful ages from three of these samples. The tectonic history of the Prince Rupert area is marked by phases of transpressive deformation, which included the development of crustal scale strike-slip shear zones and thrust slices with inverted metamorphic gradients. The Grenville Channel shear zone (GCSZ) is a crustal-scale sinistral-slip shear zone over 300 km long that strikes NW with a steep dip and shallow lineation. The GCSZ cuts through the WMB, a ductile fold and thrust belt composed of gneiss and schist with an inverted metamorphic sequence. Index minerals range from: chl and chd-grade units at the bottom of the sequence, str-bearing rocks in the middle, and ky-grt schist and local migmatites at the top of the thrust stack. The WMB was deformed and intruded by the Ecstall Pluton after the inverted metamorphic sequence had formed. The Ecstall is an epi-bearing hbl-qtz diorite emplaced between 91 and 93.5±1 Ma (Butler et al., 2001). Sample G-16A from Kumeleon Inlet (W of the Ecstall pluton) is a schist containing grt+biot+musc+qtz+epi+amph+sil, with small (<1 mm) euhedral grt. Kinematic indicators, including grt porphyroclasts, indicate left-lateral, top to the south, strike-slip shear. This sample yields a Lu-Hf age of 102±3.6 Ma (2σ, MSWD=1.5) based on seven grt and three whole-rock fractions, and a P-T estimate of 5.5±1 kbar and 590°±50° C from garnet-biotite thermobarometry. Sample 98-114A from Ridley Island (NW of Ecstall pluton) is a schist containing musc+biot+qtz+grt+ky+plag+chl+ill and with syn-tectonic euhedral garnet (1 cm). Grt contains sigmoidal inclusion trails that suggest rotation during left lateral shear, consistent with shear bands and C-S fabrics developed in the matrix of the sample. Grt in the sample produced a twelve-point isochron of 107.3±2.6 Ma (2σ, MSWD=1.6), indicating deformation and metamorphism at this time. Sample 06B-57, a garnet amphibolite migmatite from the inner aureole of the Ecstall pluton, contains grt up to 4 cm in diameter concentrated in leucosome layers. Qtz inclusion trails are consistent with rotation during reverse shear (pluton-side up), in addition to meso-scale folds, shear bands and dike arrays in adjacent rocks. This sample had complex systematics that record an older age of ~105 Ma with a younger overprinting of 90- 94 Ma during pluton emplacement. Pegmatite dikes contained within the Ecstall occur at high angles to the magmatic foliation, normal to the pluton margins, and indicate that the pluton was not folded after the pegmatite dikes were intruded. These new ages directly date garnet growth during metamorphism and deformation in the Prince Rupert area, and show that development of the inverted metamorphic sequence predated emplacement of the Ecstall pluton by 10 to 15 Ma. The data further indicate that left lateral strike slip shearing occurred between 107 and 102 Ma, at the same time much of the North American Cordillera was undergoing major contractional deformation.

Barite recrystallization in the presence of 226Ra and 133Ba

NASA Astrophysics Data System (ADS)

Heberling, Frank; Metz, Volker; Böttle, Melanie; Curti, Enzo; Geckeis, Horst

2018-07-01

Despite the long history of studies on (Ba,Ra)SO4, various recent investigations aimed at improving our understanding of its formation processes and thermodynamics. Accumulation of natural Ra isotopes (mainly 226Ra and 228Ra) in (Ba,Ra)SO4 plays an important role in many geotechnical applications and water desalination facilities. In the near field of a nuclear waste repository, barite formation may be expected e.g. as a consequence of contact of spent nuclear fuel or vitrified high level waste with sulfate containing ground water, and may control the potential release of Ra from waste forms upon leakage. Here, we present results of long term batch-type barite recrystallization experiments conducted in the simultaneous presence of 226Ra and 133Ba as a function of initial Ra2+ concentration and pH with the same type and charge of barite powder as used in previous studies (Curti et al., 2010; Klinkenberg et al., 2014; Brandt et al., 2015). Due to the simultaneous measurement of 133Ba and 226Ra our data allow for a direct relation of 226Ra uptake with barite recrystallization, which leads to more accurate partition coefficients compared to previous studies. During a reaction period of five years, barite is continuously recrystallizing. Within the investigated radium concentration range (Ba(1-X)RaXSO4 with X < 0.0006), we measure a partition coefficient of D = 2.1 ± 0.5. The partition coefficient is constant within uncertainty during almost five years (1793 days) of experimental duration. This value is in line with a description of (Ba,Ra)SO4 as an ideal solid solution based on the solubility products (KSP) of the endmembers barite (log10(KSP(barite)) = -9.97) and radium sulfate (log10(KSP(RaSO4)) = -10.26; dimensionless Guggenheim parameter, a0 = 0.0 ± 0.3). Apparent discrepancies to previous theoretical results (a0 = 1.0 ± 0.4) may be resolved when the uncertainties related to the solubility of RaSO4 are considered. Compared to results of previous publications, recrystallization is extremely slow in the experiments presented here. While previous authors suggested complete equilibration of bulk microcrystalline barite within less than three years, a recrystallization of less than 7% of the barite mass is observed within five years. We describe the progress of recrystallization with a new modified homogeneous recrystallization model. Observed recrystallization rates are in the range 0.11-1.5 nmol/(m2 s) and increase with decreasing pH. According to this modified homogeneous recrystallization model, complete bulk barite equilibration is expected in about 1400-16,900 years. The strongly decreased recrystallization kinetics in our experiments is likely related to a strongly prolonged pre-equilibration time (0.8 years), which according to XRD investigations, leads to a higher crystallinity (higher crystal domain size and lower Debye-Waller parameters) of the barite powder.

Deformation Enhanced Recrystallization of Titanite: Insight from the Western Gneiss Region Ultrahigh-Pressure Terrane

NASA Astrophysics Data System (ADS)

Gordon, S. M.; Reddy, S. M.; Blatchford, H.; Whitney, D. L.; Kirkland, C. L.; Teyssier, C.; Evans, N. J.; McDonald, B.

2017-12-01

Titanite readily recrystallizes due to metamorphism, deformation, and/or fluids making it an ideal chronometer for tracking the exhumation of high-grade rocks. The Western Gneiss Region (WGR), Norway, is a giant UHP terrane exhumed as a fairly coherent slab. Parts of the WGR underwent little deformation during exhumation; however, meters-scale shear zones, located across the WGR, deformed over a range of pressures, from (U)HP to amphibolite facies. Titanite from quartzofeldpathic gneiss within, directly adjacent to, and 300 m away from a mylonitic shear zone within the southern WGR have been analyzed to track exhumation and investigate effects of deformation on recrystallization and trace-element mobility. EBSD was used to characterize the microstructural evolution of the gneisses, and trace-element concentrations and timing of recrystallization were estimated by split-stream LA-ICPMS. Titanite grain size decreases from outside (>200) to inside (<75 µm) the shear zone. Gneiss in and directly adjacent to the shear zone contain partially to completely recrystallized grains, with 207-corrected 206Pb/238U ages of <405 Ma. Gneiss within the shear zone shows a greater percentage of recrystallized grains. EBSD data indicate that some titanite comprises multiple subgrains within an optically coherent single grain. Subgrains in titanite cores show evidence of inherited radiogenic Pb, whereas subgrains in rims and tails of deformed sigma grains were recrystallized. In a gneiss directly adjacent to the shear zone, optically coherent grains are zoned, with increasing Sr and decreasing Zr from core to rim; titanite subgrains within the shear-zone gneiss are too small to analyze. In comparison, titanite from the gneiss outside the shear zone does not show any internal microstructures or evidence for Scandian recrystallization and has low U and high 204Pb. These results show that most trace elements are unaffected by deformation of titanite; however, Pb is mobile. Deformation thus plays an important role in resetting U-Pb systematics and allows the timing of shear zone development to be linked to the early stages of eclogite exhumation at ca. 405 Ma. Atom-probe analyses of adjacent subgrains, one that has recrystallized and one with an inherited age, will provide insight into trace-element mobility on the nm-scale.

[Comporison Sduty of Microstructure by Metallographicalk on the Polarized Light and Texture by XRD of CC 5083 and CC 5182 Aluminium Alloy after Cold Rolling and Recrystallization].

PubMed

Chen, Ming-biao; Li, Yong-wei; Tan, Yuan-biao; Ma, Min; Wang, Xue-min; Liu, Wen-chang

2015-03-01

At present the study of relation between microstructure, texture and performance of CC 5083 aluminium alloy after cold tolling and recrystallization processes is still finitude. So that the use of the CC 5083 aluminium alloy be influenced. Be cased into electrical furnace, hot up with unlimited speed followed the furnace hot up to different temperature and annealed 2h respectively, and be cased into salt-beth furnace, hot up quickly to different temperature and annealed 30 min respectively for CC 5083 and CC 5182 aluminum alloy after cold roling with 91.5% reduction. The microstructure be watched use metallographic microscope, the texture be inspected by XRD. The start temperature of recrystallization and grain grow up temperature within annealing in the electric furnace of CC 5083 aluminum alloy board is 343 degrees C, and the shap of grain after grow up with long strip (the innovation point ); The start temperature of recrystallization within annealling in the salt bath furnace of CC 5083 is 343 degrees C. The start temperature and end temperature of recrystallization within annealling of CC 5083 and CC 5182 aluminum alloy is 371 degrees C. The grain grow up outstanding of cold rooled CC 5152 aluminum alloy after annealed with 454 degrees C in the electric furnace and salt bath furnace. The start temperature of grain grow up of CC 5083 alluminurn alloy annealed in the electric furnace and salt bath furnace respectively is higher than the start temperature of grain grow up of CC 5182 alluminum alloy annealed in the electric furnace and salt bath furnace respectively. The strat temperature of recrystallization grain grow up is higher than which annealled with other three manner annealing process. The recrystallization temperature of CC 5182 annealed in the salt bath furnace is higher than which annealed in the electric furnace. The recrystallization temperature of the surface layer of CC 5083 and CC 5182 aluminum alloy is higher than the inner layer (the innovation point). There is a difference each other of the structure and the texture of the four manner annealing aluminum alloy (the innovation point). There is a little difference at the recrystallization processes course reflectived by the observe results of structure transform and by the examination results of texture transmission.

Deformation Enhanced Recrystallization of Titanite: Insight from the Western Gneiss Region Ultrahigh-Pressure Terrane

NASA Astrophysics Data System (ADS)

Gordon, S. M.; Reddy, S. M.; Blatchford, H.; Whitney, D. L.; Kirkland, C. L.; Teyssier, C.; Evans, N. J.; McDonald, B.

2016-12-01

Titanite readily recrystallizes due to metamorphism, deformation, and/or fluids making it an ideal chronometer for tracking the exhumation of high-grade rocks. The Western Gneiss Region (WGR), Norway, is a giant UHP terrane exhumed as a fairly coherent slab. Parts of the WGR underwent little deformation during exhumation; however, meters-scale shear zones, located across the WGR, deformed over a range of pressures, from (U)HP to amphibolite facies. Titanite from quartzofeldpathic gneiss within, directly adjacent to, and 300 m away from a mylonitic shear zone within the southern WGR have been analyzed to track exhumation and investigate effects of deformation on recrystallization and trace-element mobility. EBSD was used to characterize the microstructural evolution of the gneisses, and trace-element concentrations and timing of recrystallization were estimated by split-stream LA-ICPMS. Titanite grain size decreases from outside (>200) to inside (<75 µm) the shear zone. Gneiss in and directly adjacent to the shear zone contain partially to completely recrystallized grains, with 207-corrected 206Pb/238U ages of <405 Ma. Gneiss within the shear zone shows a greater percentage of recrystallized grains. EBSD data indicate that some titanite comprises multiple subgrains within an optically coherent single grain. Subgrains in titanite cores show evidence of inherited radiogenic Pb, whereas subgrains in rims and tails of deformed sigma grains were recrystallized. In a gneiss directly adjacent to the shear zone, optically coherent grains are zoned, with increasing Sr and decreasing Zr from core to rim; titanite subgrains within the shear-zone gneiss are too small to analyze. In comparison, titanite from the gneiss outside the shear zone does not show any internal microstructures or evidence for Scandian recrystallization and has low U and high 204Pb. These results show that most trace elements are unaffected by deformation of titanite; however, Pb is mobile. Deformation thus plays an important role in resetting U-Pb systematics and allows the timing of shear zone development to be linked to the early stages of eclogite exhumation at ca. 405 Ma. Atom-probe analyses of adjacent subgrains, one that has recrystallized and one with an inherited age, will provide insight into trace-element mobility on the nm-scale.

Ignimbrites to batholiths: integrating perspectives from geological, geophysical, and geochronological data

USGS Publications Warehouse

Lipman, Peter W.; Bachmann, Olivier

2015-01-01

Multistage histories of incremental accumulation, fractionation, and solidification during construction of large subvolcanic magma bodies that remained sufficiently liquid to erupt are recorded by Tertiary ignimbrites, source calderas, and granitoid intrusions associated with large gravity lows at the Southern Rocky Mountain volcanic field (SRMVF). Geophysical data combined with geological constraints and comparisons with tilted plutons and magmatic-arc sections elsewhere are consistent with the presence of vertically extensive (>20 km) intermediate to silicic batholiths (with intrusive:extrusive ratios of 10:1 or greater) beneath the major SRMVF volcanic loci (Sawatch, San Juan, Questa-Latir). Isotopic data require involvement of voluminous mantle-derived mafic magmas on a scale equal to or greater than that of the intermediate to silicic volcanic and plutonic rocks. Early waxing-stage intrusions (35–30 Ma) that fed intermediate-composition central volcanoes of the San Juan locus are more widespread than the geophysically defined batholith; these likely heated and processed the crust, preparatory for ignimbrite volcanism (32–27 Ma) and large-scale upper-crustal batholith growth. Age and compositional similarities indicate that SRMVF ignimbrites and granitic intrusions are closely related, but the extent to which the plutons record remnants of former magma reservoirs that lost melt to volcanic eruptions has been controversial. Published Ar/Ar-feldspar and U-Pb-zircon ages for plutons spatially associated with ignimbrite calderas document final crystallization of granitoid intrusions at times indistinguishable from the tuff to ages several million years younger. These ages also show that SRMVF caldera-related intrusions cooled and solidified soon after zircon crystallization, as magma supply waned. Some researchers interpret these results as recording pluton assembly in small increments that crystallized rapidly, leading to temporal disconnects between ignimbrite eruption and intrusion growth. Alternatively, crystallization ages of the granitic rocks are here inferred to record late solidification, after protracted open-system evolution involving voluminous mantle input, lengthy residence (105–106yr) as near-solidus crystal mush, and intermittent separation of liquid to supply volcanic eruptions. The compositions of the least-evolved ignimbrite magmas tend to merge with those of caldera-related plutons, suggesting that the plutons record nonerupted parts of long-lived cogenetic magmatic systems, variably modified prior to final solidification. Precambrian-source zircons are scarce in caldera plutons, in contrast to their abundance in some peripheral waning-stage intrusions of the SRMVF, implying dissolution of inherited crustal zircon during lengthy magma assembly for the ignimbrite eruptions and construction of a subvolcanic batholith. Broad age spans of zircons (to several million years) from individual samples of some ignimbrites and intrusions, commonly averaged and interpreted as “intrusion-emplacement age,” alternatively provide an incomplete record of intermittent crystallization during protracted incremental magma-body assembly, with final solidification only when the system began to wane. Analyses of whole zircons cannot resolve late stages of crystal growth, and early growth in a long-lived magmatic system may be poorly recorded due to periods of zircon dissolution. Overall, construction of a batholith can take longer than recorded by zircon-crystallization ages, while the time interval for separation and shallow assembly of eruptible magma may be much shorter. Magma-supply estimates (from ages and volcano-plutonic volumes) yield focused intrusion-assembly rates sufficient to generate ignimbrite-scale volumes of eruptible magma, based on published thermal models. Mid-Tertiary processes of batholith assembly associated with the SRMVF caused drastic chemical and physical reconstruction of the entire lithosphere, probably accompanied by asthenospheric input.

Timing and nature of tertiary plutonism and extension in the Grouse Creek Mountains, Utah

USGS Publications Warehouse

Egger, A.E.; Dumitru, T.A.; Miller, E.L.; Savage, C.F.I.; Wooden, J.L.

2003-01-01

The Grouse Creek-Albion-Raft River metamorphic core complex in northwestern Utah and southern Idaho is characterized by several Tertiary plutons with a range of ages and crosscutting relations that help constrain the timing of extensional deformation. In the Grouse Creek Mountains, at least three distinct, superimposed, extension-related Tertiary deformational events are bracketed by intrusive rocks, followed by a fourth event: motion on range-bounding faults. The Emigrant Pass plutonic complex was emplaced at depths of less than 10 km into Permianage rocks. SHRIMP U-Pb zircon analysis indicates a three-stage intrusion of the complex at 41.3 ?? 0.3 Ma, 36.1 ?? 0.2 Ma, and 34.3 ?? 0.3 Ma. The two youngest phases represent distinctly younger intrusive event(s) than the oldest phase, separated by more than 5 m.y. The oldest phase cuts several metamorphosed and deformed younger-on-older faults, providing a pre-41 Ma age bracket for oldest extension-related deformation in the region. The youngest phase(s) are interpreted to have been intruded during delelopment of a map-scale. N-S-trending recumbent fold, the Bovine Mountain fold, formed during vertical shortening of roof rocks during intrusion. This second event folded older normal faults that are likely pre-41 Ma. Zircons from the youngest part of the pluton show inheritance from Archean basement (???2.5 Ga) and from its Proterozoic sedimentary cover (???1.65 Ga). The Red Butte pluton, emplaced at 15-20 km depth, intruded highly metamorphosed Archean orthogneiss at 25.3 ?? 0.5 Ma; cores of some zircons yield latest Archean ages of 2.55 Ga. The pluton is interpreted to have been intruded during a third deformational and metamorphic event that resulted in vertical flattening fabrics formed during NW to EW stretching, ultimately leading to thinning of cover and top-to-the west motion on the Ingham Pass fault. The Ingham Pass fault represents an important structure in the Grouse Creek Mountains, as it juxtaposes two parts of the crust that apparently resided as much as 10 km apart (in depth) at times as young as the Miocene. The varied structural, metamorphic, and intrusive relations obsreved in the Grouse Creek Mountains reflect their formation at different levels within the crust. Data from these various levels argue that plutonism has been a key mechanism far transferring heat into the middle and upper crust, and localizing strain during regional extension. Interestingly, events documented here correlate in a broad way with cooling events documented in the Raft River Mountains, although plutons are not exposed there. Major and trace element geochemistry imply a crustal component in all of the studied plutons, indicating significant degrees of crustal melting at depth during extension, and point to mantle heat sources during the timespan of Basin and Range extension as the cause of melting. Basin and Range faulting and final uplift of the range is recorded by apatite fission track ages, averaging 13.4 Ma, and deposition of about 2 km of syn-faulting basin fill deposits along the Grouse Creek fault mapped along the western flank of the range. Similar apatite ages from the Albion Mountains to the north indicate that the western side of the Albion-Raft River-Grouse Creek core complex behaved as a single rigid crustal block at this time.

Magnetic anisotropy of Cenozoic igneous rocks from the Vardar zone (Kopaonik area, Serbia)

NASA Astrophysics Data System (ADS)

Lesić, Vesna; Márton, Emő; Cvetkov, Vesna; Tomić, Dragana

2013-06-01

The Vardar zone is the suture between colliding Adriatic and Eurasian plates, comprising profoundly different tectonostratigraphic units which came into contact during Early Palaeogene. The zone was subsequently intruded by igneous rocks, concentrated at certain places, like the Kopaonik area, where plutonic and extrusive igneous rocks are in abundance. The largest I-type plutons (Kopaonik, Drenje and Željin) form the central part of an N-S running anticline, with an undulating and northward sinking axis. The anticline is conceived as having been formed during compression (D3 phase of deformation of post-Cretaceous age), prior to the intrusion of I-type granitoids or alternatively, the updoming of the regionally metamorphosed rocks was caused by the intrusion of the plutons. The granitoids, forming the core of the anticline and the satellite bodies intruded during Oligocene (at the depth of 10 km), but were exhumed during a mid-Miocene extensional D4 phase of deformation, simultaneously with the intrusion of S-type granite which crops out NW of the anticline. Dacitoandesites, mostly situated west of the anticline, are considered as of Oligocene age, but older than the plutonic rocks. The Miocene granite has visible foliation, the I-type granodiorites and the dacitoandesites occasionally exhibit visibly oriented mineral fabric. In such cases, the fast and inexpensive magnetic susceptibility measurements can provide information about the degree and type of the orientation of the fabric. Our aim was to find out if the loosely dated D3 and the well-dated D4 deformations left imprint in the magnetic fabrics of the above-mentioned rocks by studying the magnetic susceptibility anisotropy of nearly 300 independently oriented samples from 25 localities. We found that the granodiorites often have high or extremely high degree of magnetic anisotropy, suggesting that it was acquired under the influence of stress in the last stage of solidification. In the main body of the Kopaonik and Željin plutons and in the satellite body of Dubovo anisotropy of magnetic susceptibility (AMS) ellipsoids can be related to the N-S running Kopaonik-Željin anticline. In the northern part of the Kopaonik pluton, and in the Drenje massif the pattern of the schistosity planes do not fit to the anticlinorium, neither seem to satisfy an onion-shell model put forward earlier for the Kopaonik pluton. On the contrary, the orientations of the AMS ellipsoids are consistent with those for the Drenje mass (not included in the `onion-shell' structure) and they are probably related to regional extension. AMS fabric of the Kremići satellite body (W of the Kopaonik pluton) and that of the Miocene S-type granite is also interpreted as to reflect Miocene extension. Thus, we suggest that at certain places the magnetic fabric of the I-type intrusions was `frozen in' during compressional deformation (D3). The magnetic fabric of the northern part of the Kopaonik pluton, the Drenje mass, the Kremići body must have been still deformable during D4 (ductile) phase, when the Polumir granite was emplaced. The magnetic fabrics of the dacitoandesites did not reflect deformation. The reason may be that they cooled completely before the intrusion of the I-type granodiorites.

Influence of warm rolling temperature on ferrite recrystallization in low C and IF steels

NASA Astrophysics Data System (ADS)

Barnett, Matthew Robert

Experiments involving single pass laboratory rolling and isothermal salt bath annealing were carried out; three steels were studied: a titanium stabilized interstitial free grade and two low carbon grades, one of which contained a particularly low level of manganese (˜0.009wt.%). The two low carbon grades were produced such that any complication from AlN precipitation was avoided. X-ray, neutron diffraction, optical metallography and mechanical testing measurements were carried out on the samples before and after annealing. The main aim of this work was to further the understanding of the metallurgy of recrystallization after ferrite rolling at temperatures between room temperature and 700sp°C. Deformation textures, recrystallization kinetics, final grain sizes and recrystallization textures were quantified for all the samples and experimental conditions. A major conclusion based on these data is that the influence of rolling temperature is far greater in the low carbon samples than in the IF grade. Indeed, the IF results alter only marginally with increasing temperature. In the low carbon grades, however, the rolling texture sharpens, recrystallization slows, the final grain size coarsens, and the recrystallization texture changes when the rolling temperature is increased. This distinct difference between the two steel types is explained in terms of their contrasting deformation behaviors. Solute carbon and nitrogen in the low carbon grades interact with dislocations causing high stored energy levels after low temperature rolling (due to dynamic strain aging) and high strain rate sensitivities during high temperature rolling (due to the solute drag of dislocations in the transition region between DSA and DRC). Nucleation during subsequent recrystallization is strongly influenced by both the stored energy and the strain rate sensitivity. The latter affects the occurrence of the flow localisations that enhance nucleation.

Anorthosite Magma Revisited: Field and Petrographic Evidence From the CRUML Belt, Grenville Province, Quebec

NASA Astrophysics Data System (ADS)

Dymek, R. F.

2004-05-01

The "CRUML belt" comprises a series of relatively small (each <500 km2), late- to post-tectonic, Grenville-aged (~1010-1060 Ma) anorthositic plutons that extends from near Quebec City to north of Chicoutimi, a distance of >400 km. The dominant lithology in each pluton is andesine anorthosite (AA) of exceptional purity (typical outcrops contain >95% plag), with minor leuconorite, oxide-rich norite, and ilmenitite (locally ore bodies) also present. Northern CRUML plutons (Labrieville and Mattawa) contain a leucogabbroic border facies in addition, and are more sodic and potassic (with higher Ba and Sr) than the southern ones (Chateau Richer=CR, St. Urbain, Lac Chaudiere, Lac a Jack, and Lac Piche). Each pluton is dome-shaped (concentric, outward-dipping foliations), and displays a subtle yet persistent pluton-scale, core-to-margin increase in plag An-content that is suggestive of a pressure decrease during crystallization. It thus appears that the CRUML-belt plutons were emplaced as magmatic diapirs. Strong reverse zoning in individual plag crystals, however, has a different origin (see below). Excepting CR, the CRUML-belt plutons also contain enclaves of labradorite anorthosite (LA) that range in size from dm to km. Contacts between the AA and LA typically are very sharp, with no obvious evidence of interaction between the two lithologies. However, rare outcrops having plag compositions intermediate between AA and LA may represent examples of modified rock. Most LA outcrops are invaded by dikes and veins (even anastomosing veinlets and net-veins) of the AA, and some dikes contain LA xenoliths as well. Locally, lit-par-lit injection of AA into LA is accompanied by disruption and rotation of the latter. Thus, field relations provide compelling evidence for the mobile nature of AA and its emplacement as "magma" into the LA. Plag grain boundaries in many AA samples (all dike samples) are decorated by fine-grained vermicular intergrowths of ~An80 + quartz, termed "calcic myrmekite" by Dymek & Schiffries (Can. Min., 1987, p. 291), which formed by corrosion of early formed plag by late-stage aqueous fluid. Independent evidence for the presence of water in the evolution of the CRUML-belt plutons is provided by the widespread occurrence of biotite. Extensive reverse zoning in many individual plag crystals also can be explained by the involvement of water. The presence of identical features elsewhere in Quebec (e.g., in the Allard Lake massif) confirms that they are not unique to anorthosites of the CRUML belt, and may be more widespread than realized. The present author concludes, reluctantly, that the anorthosite dikes do not represent magma in the traditional sense but rather correspond to cumulate materials mobilized in the presence of an aqueous grain-boundary film. In this scenario, the dynamic environment of the upward-moving magmatic diapir caused expulsion of the putative aqueous fluid, forcing it into zones that led to "hyrofracturing" of the LA concomitant with dike emplacement.

Deformation due to the distension of cylindrical igneous contacts: A kinematic model

NASA Astrophysics Data System (ADS)

Morgan, John

1980-06-01

A simple kinematic model is described that predicts the state of overall wall-rock strain resulting from the distension of igneous contacts. It applies to the axially symmetric expansion of any pluton whose overall shape is a cylinder with circular cross section i.e. to late magmatic plutons which are circular or annular in cross section. The model is not capable of predicting the strain distribution in the zone of contact strain, but does predict components of overall strain whose magnitudes are calculated from the change in shape of the zone of contact strain. These strain components are: (1) overall radial shortening of the wall rocks overlineer; (2) overall vertical extension overlineev; and (3) overall horizontal extension parallel to the contact overlineeh (the axis of symmetry is arbitrarily oriented vertically). In addition, one local strain magnitude can be predicted, namely the horizontal extension of the contact surface ehc. The four strain parameters and {(1 + overlineev) }/{(1 + overlineeh}) are graphed as functions of two independent variables: (1) outward distension of the contact ( r - r0)/ r; and (2) depth of contact strain ( rd - r)/ r. r is the present, observed radius of the pluton, r0 is the original radius and rd is the radius of contact strain. If ( rd- r)/ r is reduced or ( r - r0)/ r is increased, absolute values of the overall strain components are increased, ehc increases with ( r - r0)/ r but is independent of ( r d - r)/r · (1 + overlineev)/(l + overlineeh) ≅ 1 over a large range of values of both independent variables. The model has been applied to two Archean plutons in northwestern Ontario. According to a previous study, strain near the contact of the Bamaji-Blackstone batholith is characterized by large values of extension parallel to the contact and shortening normal to the contact, ( r - r0)/r and ( rd - r)/ r are estimated to be less than 0.20 and 0.27 respectively. The horizontal extension parallel to the contact is apparently a minimum estimate of ehc and the depth of contact strain was previously underestimated. The range of values of ehc indicates that ( r - r0)/ r is larger than previously estimated by a factor of at least three. A similar problem has been encountered at the convex boundary of the Marmion Lake crescentic pluton. The pluton was emplaced along an older contact between greenstone and tonalitic gneiss. A minimum value of the outward displacement of the convex boundary of the pluton can be estimated from a major fold in the greenstone. It is found that the magnitude of this outward displacement is greater than the width of the pluton or ( r - r0). Apparently, the folding pre-dates the emplacement of the crescent; it probably dates from the emplacement of the tonalitic gneiss into greenstone cover.

Effects of V addition on recrystallization resistance of 7150 aluminum alloy after simulative hot deformation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lai, Jing; Shi, Cangji; Chen, X.-Grant, E-mail: xgrant_chen@uqac.ca

2014-10-15

The effects of different V contents (0.01 to 0.19 wt.%) on the recrystallization resistance of 7150 aluminum alloys during post-deformation heat treatment were investigated. The microstructural evolutions at as-cast, as-homogenized conditions and after post-deformation annealing were studied using optical, scanning electron and transmission electron microscopes and using the electron backscattered diffraction technique. The precipitation of Al{sub 21}V{sub 2} dispersoids was observed in alloys containing 0.11 to 0.19 wt.% V after homogenization. The dispersoids were mainly distributed in the dendrite cells, and the precipitate-free zones occurred in the interdendritic regions and near grain boundaries. V addition could significantly enhance the recrystallizationmore » resistance during post-deformation annealing, particularly in the presence of a great number of Al{sub 21}V{sub 2} dispersoids. Recrystallized grain growth was effectively restricted because of the dispersoid pinning effect. The alloy containing 0.15 wt.% V exhibited the highest recrystallization resistance amongst all V-containing alloys studied. - Highlights: • Investigated the effect of V level on microstructure and flow stress of 7150 alloys • Characterized microstructures using optical microscopy, SEM, TEM and EBSD • Described the precipitation behavior of V-dispersoids in the dendritic structure • Studied the V effect on recrystallization resistance during post heat treatment • V addition greatly enhanced the recrystallization resistance during annealing.« less

Recrystallization and grain growth phenomena in a particle-reinforced aluminum composite

NASA Astrophysics Data System (ADS)

van Aken, D. C.; Krajewski, P. E.; Vyletel, G. M.; Allison, J. E.; Jones, J. W.

1995-06-01

Recrystallization and grain growth in a 2219/TiC/15p composite were investigated as functions of the amount of deformation and deformation temperature. Both cold and hot deformed samples were annealed at the normal solution treatment temperature of 535 °C. It was shown that large recrystallized grain diameters, relative to the interparticle spacing, could be produced in a narrow range of deformation for samples cold-worked and those hot-worked below 450 °C. For cold-worked samples, between 4 to 6 pct deformation, the recrystallized grain diameters varied from 530 to 66 μm as the amount of deformation increased. Subsequent grain growth was not observed in these recrystallized materials and noncompact grain shapes were observed. For deformations greater than 15 pct, recrystallized grain diameters less than the interparticle spacing were observed and subsequent grain growth produced a pinned grain diameter of 27 μm. The pinned grain diameter agreed well with an empirical model based on three dimensional (3-D) Monte Carlo simulations of grain growth and particle pinning in a two-phase material. Tensile properties were determined as a function of grain size, and it was shown that grain size had a weak influence on yield strength. A maximum in the yield strength was observed at a grain size larger than the normal grain growth and particle-pinned diameter.

Dynamic Recrystallization of the Constituent γ Phase and Mechanical Properties of Ti-43Al-9V-0.2Y Alloy Sheet.

PubMed

Zhang, Yu; Wang, Xiaopeng; Kong, Fantao; Chen, Yuyong

2017-09-15

A crack-free Ti-43Al-9V-0.2Y alloy sheet was successfully fabricated via hot-pack rolling at 1200 °C. After hot-rolling, the β/γ lamellar microstructure of the as-forged TiAl alloy was completely converted into a homogeneous duplex microstructure with an average γ grain size of 10.5 μm. The dynamic recrystallization (DRX) of the γ phase was systematically investigated. A recrystallization fraction of 62.5% was obtained for the γ phase in the TiAl alloy sheet, when a threshold value of 0.8° was applied to the distribution of grain orientation spread (GOS) values. The high strain rate and high stress associated with hot-rolling are conducive for discontinuous dynamic recrystallization (DDRX) and continuous dynamic recrystallization (CDRX), respectively. A certain high-angle boundary (HAGB: θ = 89° ± 3°<100>), which is associated with DDRX, occurs in both the recrystallized and deformed γ grains. The twin boundaries play an important role in the DDRX of the γ phase. Additionally, the sub-structures and sub-boundaries originating from low-angle boundaries in the deformed grains also indicate that CDRX occurs. The mechanical properties of the alloy sheet were determined at both room and elevated temperatures. At 750 °C, the alloy sheet exhibited excellent elongation (53%), corresponding to a failure strength of 467 MPa.

[Investigation of the recrystallization of trehalose as a good glass-former excipient].

PubMed

Katona, Gábor; Orsolya, Jójártné Laczkovich; Szabóné, Révész Piroska

2014-01-01

An amorphous form of trehalose is easy to prepare by using a solvent method. The recrystallization kinetics can be followed well, which is important because of the occurrence of polymorphic forms of trehalose. This is especially significant in the case of dry powder inhalers. Spray-drying was used as a preparation method this being one of the most efficient technologies with which to obtain an amorphous form. This method can result in the required particle size and a monodisperse distribution with excellent flowability and with moreover considerable amorphization. In our work, trehalose was applied as a technological auxiliary agent, and literature data relating to the spray-drying technology of trehalose were collected. Studies were made of the influence of the spraying process on the amorphization of trehalose and on the recrystallization of amorphous trehalose during storage. Amorphous samples were investigated under 3 different conditions during 3 months. The recrystallization process was followed by differential scanning calorimetry and X-ray powder diffraction. The results demonstrated the perfect amorphization of trehalose during the spray-drying process. The glass transition temperature was well measurable in the samples and proved to be the same as the literature data. Recrystallization under normal conditions was very slow but at high relative humidity the process was accelerated greatly. Amorphous trehalose gave rise to dihydrate forms (gamma- and h-trehaloses) during recrystallization, and beta-trehalose was also identified as an anhydrous form.

Recrystallization in Si upon ion irradiation at room temperature in Co/Si(111) thin film systems

NASA Astrophysics Data System (ADS)

Banu, Nasrin; Satpati, B.; Dev, B. N.

2018-04-01

After several decades of research it was concluded that for a constant flux recrystallization in Si upon ion irradiation is possible only at high temperature. At low temperature or at room temperature only amorphization can take place. However we have observed recrystallization in Si upon ion irradiation at room temperature in a Co/Si thin film system. The Co/Si sample was prepared by deposition of 25 nm Co on clean Si(111) substrate. An oxide layer (˜ 2nm) of cobalt at the top of the film due to air exposure. The ion irradiation was done at room temperature under high vacuum with 1MeV Si+ ion with low beam current < 400 nA. Earlier we have shown similar ion induced recrystallization in Si(100) substrate which had a sandwich Si/Ni/Si structure. This system had an epitaxial buffer Si layer on Si substrate. This study also shows that the phenomenon is independent of substrate orientation and buffer layer. We have used transmission electron microscopy (TEM) to study the recrystallization behavior.

Purification and crystal growth of NPB via imidazolium based ionic liquids

NASA Astrophysics Data System (ADS)

Oh, Yong-Taeg; Shin, Dong-Chan

2018-04-01

Here we report the production of high purity and crystallinity organic electronic material of NPB (N,N‧-Di-[(1-naphthyl)-N,N‧-diphenyl]-1,1‧-biphenyl-4,4‧-diamine (C44H32N2) through solution recrystallization within imidazolium based ionic liquids. When low purity NPB was recrystallized at 170 °C within C8MIM[TFSI], its purity was drastically improved from 82% to 99.92%. These recrystallized NPB crystals showed 0.040° FWHM (Full Width Half Maximum) of X-ray (1 1 1) diffraction peak. Such small FWHM angle indicates single-crystal like crystallinity. Initial NPB powder was dissolved at 100 °C and recrystallized at temperature above 110 °C. At higher temperature of 170 °C, a small number of bigger crystals were formed compared to those at 110 °C. This can be well explained by the classical nucleation and growth theory. Therefore, solution recrystallization process using ionic liquid might be promising for mass production of organic electronic materials by replacing the widely-used sublimation purification method.

Microstructural Evolution During Cold Rolling and Subsequent Annealing in Low-Carbon Steel with Different Initial Microstructures

NASA Astrophysics Data System (ADS)

Ogawa, Toshio; Dannoshita, Hiroyuki; Maruoka, Kuniaki; Ushioda, Kohsaku

2017-08-01

Microstructural evolution during cold rolling and subsequent annealing of low-carbon steel with different initial microstructures was investigated from the perspective of the competitive phenomenon between recrystallization of ferrite and reverse phase transformation from ferrite to austenite. Three kinds of hot-rolled sheet specimens were prepared. Specimen P consisted of ferrite and pearlite, specimen B consisted of bainite, and specimen M consisted of martensite. The progress of recovery and recrystallization of ferrite during annealing was more rapid in specimen M than that in specimens P and B. In particular, the recrystallized ferrite grains in specimen M were fine and equiaxed. The progress of ferrite-to-austenite phase transformation during intercritical annealing was more rapid in specimen M than in specimens P and B. In all specimens, the austenite nucleation sites were mainly at high-angle grain boundaries, such as those between recrystallized ferrite grains. The austenite distribution was the most uniform in specimen M. Thus, we concluded that fine equiaxed recrystallized ferrite grains were formed in specimen M, leading to a uniform distribution of austenite.

Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy

PubMed Central

Jo, Y. H.; Jung, S.; Choi, W. M.; Sohn, S. S.; Kim, H. S.; Lee, B. J.; Kim, N. J.; Lee, S.

2017-01-01

The excellent cryogenic tensile properties of the CrMnFeCoNi alloy are generally caused by deformation twinning, which is difficult to achieve at room temperature because of insufficient stress for twinning. Here, we induced twinning at room temperature to improve the cryogenic tensile properties of the CrMnFeCoNi alloy. Considering grain size effects on the critical stress for twinning, twins were readily formed in the coarse microstructure by cold rolling without grain refinement by hot rolling. These twins were retained by partial recrystallization and played an important role in improving strength, allowing yield strengths approaching 1 GPa. The persistent elongation up to 46% as well as the tensile strength of 1.3 GPa are attributed to additional twinning in both recrystallized and non-recrystallization regions. Our results demonstrate that non-recrystallized grains, which are generally avoided in conventional alloys because of their deleterious effect on ductility, can be useful in achieving high-strength high-entropy alloys. PMID:28604656

High-Temperature Flow Stress and Recrystallization Characteristics of Al-Bearing Microalloyed TWIP Steels

NASA Astrophysics Data System (ADS)

Somani, Mahesh Chandra; Porter, David A.; Hamada, Atef S.; Karjalainen, L. Pentti

2015-11-01

In this study, the effects of microalloying (Nb,V) and aluminum on the constitutive flow behavior and static recrystallization (SRX) characteristics of microalloyed TWIP steels (Fe-20Mn-0.6C-Al-(Nb,V)) have been investigated under hot deformation conditions. Compression tests in a Gleeble simulator, including the double-hit technique, enabled the acquisition of flow stress and recrystallization data. These were analyzed to determine the powers of strain and strain rate as well as the activation energies of deformation and recrystallization ( Q def and Q rex). Aluminum increased the flow stress and activation energy of deformation and delayed the onset of dynamic recrystallization of microalloyed TWIP steels. While microalloying with V up to 0.3 pct seems to have little or no effect on the SRX kinetics, microalloying with 0.026 pct Nb significantly slowed down the SRX rate, similarly as in the case of low C-Mn steels. Addition of high aluminum (4.9 pct) marginally retarded the SRX kinetics in comparison with the steels with low aluminum (1.5 pct), with or without microalloying with V.

Geology of the Payette National Forest and vicinity, west-central Idaho

USGS Publications Warehouse

Lund, Karen

2005-01-01

Before the Late Cretaceous, the eastern and western parts of the geologically complex Payette National Forest, as divided by the Salmon River suture, had fundamentally different geologic histories. The eastern part is underlain by Mesoproterozoic to Cambrian(?) rocks of the Laurentian (Precambrian North American) continent. Thick Mesopro-terozoic units, which are at least in part equivalent in age to the Belt Supergroup of northern Idaho and western Montana, underwent Mesoproterozoic metamorphic and deformational events, including intrusion of Mesoproterozoic plutons. Dur-ing the Neoproterozoic to early Paleozoic, the western edge of Laurentia was rifted. This event included magmatism and resulted in deposition of rift-related Neoproterozoic to Lower Cambrian(?) volcanic and sedimentary rocks above Mesopro-terozoic rocks. The western part of the forest is underlain by upper Paleozoic to lower Mesozoic island-arc volcanic and sedimentary rocks. These rocks comprise four recognized island-arc terranes that were amalgamated and intruded by intermediate-composition plutons, probably in the Late Juras-sic and Early Cretaceous, and then sutured to Laurentia along the Salmon River suture in the Late Cretaceous. The Salmon River suture formed as a right-lateral, transpressive fault. The metamorphic grade and structural complexity of the rocks increase toward the suture from both sides, and geochemical signatures in crosscutting plutonic rocks abruptly differ across the crustal boundary. Having been reactivated by younger structures, the Salmon River suture forms a north-trending topographic depression along Long Valley, through McCall, to the Goose Creek and French Creek drainages. During the last stages of metamorphism and deformation related to the suture event, voluminous plutons of the Idaho batholith were intruded east of the suture. An older plutonic series is intermediate in composition and preserved as elon-gated and deformed bodies near the suture and as parts of roof pendants to younger intrusions to the east. A younger magma series consists of undeformed, marginally peraluminous plu-tons that formed east of the suture after accretion. After suture-related compression, crustal extension resulted in voluminous volcanic and plutonic rocks of the Eocene Challis magmatic complex on the east side of the forest. Extension, from the Late Cretaceous to post-Miocene, uplifted the area of the Idaho batholith relative to the western part of the for-est and formed dominant highlands along the Snake River. Extensional basins also formed such that, in the Miocene, the Columbia River Basalt Group and related basaltic lavas flowed over most of the lower elevations on the western side of the forest and redirected erosional debris into north-trending, fault-controlled drainages and young sedimentary basins.

Ice-Active Substances from the Infective Juveniles of the Freeze Tolerant Entomopathogenic Nematode, Steinernema feltiae

PubMed Central

Ali, Farman; Wharton, David A.

2016-01-01

Steinernema feltiae is a moderately freezing tolerant nematode, that can withstand intracellular ice formation. We investigated recrystallization inhibition, thermal hysteresis and ice nucleation activities in the infective juveniles of S. feltiae. Both the splat cooling assay and optical recrystallometry indicate the presence of ice active substances that inhibit recrystallization in the nematode extract. The substance is relatively heat stable and largely retains the recrystallization inhibition activity after heating. No thermal hysteresis activity was detected but the extract had a typical hexagonal crystal shape when grown from a single seed crystal and weak ice nucleation activity. An ice active substance is present in a low concentration, which may be involved in the freezing survival of this species by inhibiting ice recrystallization. PMID:27227961

Reconnaissance geology of the Ghazzalah Quadrangle, sheet 26/41 A, Kingdom of Saudi Arabia

USGS Publications Warehouse

Quick, James E.

1983-01-01

The Ghazzalah quadrangle is located in the northern Precambrian shield of Saudi Arabia between lat 26?30' and 27?00' N. and long 41?00' and 41?30' E. The area is underlain by two lithologically distinct, Precambrian volcanosedimentary units and a wide range of dioritoid and granitoid plutonic intrusive rocks. The only Phanerozoic rocks consist of one outcrop of Tertiary(?) basalt and widespread but thin deposits of Quaternary detritus. The Banana greenstone, the oldest rock in the quadrangle, consists of intermediate volcanic and subvolcanic rocks and minor interbedded marble, which have been metamorphosed to greenschist-facies assemblages. Volcanic rocks mainly range in composition from basalt to andesite, and subvolcanic rocks consist of diorite and diabase. The Banana greenstone is unconformably overlain by silicic volcanic rocks and minor arkosic sandstone and breccia of the Hadn formation. Preservation of delicate volcanic textures suggests that the rocks have been only incipiently metamorphosed. Unpublished rubidium/strontium isotopic data for the Hadn formation suggest an age of 620 to 610 Ma. Intrusive rocks are separable according to their ages relative to the Hadn formation. Those that are unconformably overlain by the Hadn formation consist of hornblende quartz diorite and gabbro, which may be consanguineous with the Banana greenstone, and younger tonalite, biotite-hornblende granodiorite, syenogranite, and monzogranite. Plutons of monzogranite, alkali-feldspar g,ranite, syenbgranite, peralkaline granite, and hypabyssal intrusions of granophyre were probably emplaced during a period coincident with and (or) following Hadn volcanism. Uranium-lead and rubidium/strontium isotopic data for two plutons in the adjacent Al Qasr quadrangle suggest that plutonic activity persisted in the region until about 580 to 570 Ma. Faulting appears to postdate all of the plutonic rocks. The dominant faults belong to a northeast-trending system of right-lateral shears; a subordinant system consists of mainly north- to northwest-trending faults. The peralkaline-granite plutons underlying Jibal Ba'gham and Jibal ar Rumman have the most economic potential. Wadi samples from these areas show an anomalous concentrations of tin, lead, niobium, and yttrium. Localized, intense radiometric anomalies in the Ba'gham intrusive complex are associated with high concentrations )f thorium, uranium, andrare-earth elements.

Petrotectonic characteristics, geochemistry, and U-Pb geochronology of Jurassic plutons in the Upper Magdalena Valley-Colombia: Implications on the evolution of magmatic arcs in the NW Andes

NASA Astrophysics Data System (ADS)

Rodríguez, G.; Arango, M. I.; Zapata, G.; Bermúdez, J. G.

2018-01-01

Field, petrographic, and geochemical characterization along with U-Pb zircon geochronology of the Jurassic plutons exposed in the Upper Magdalena Valley (Colombia) allowed recognizing distinct western and eastern suites formed in at least three magmatic pulses. The western plutons crop out between the eastern flank of the Central Cordillera and the Las Minas range, being limited by the Avirama and the Betania-El Agrado faults. The western suite comprises a quartz monzonite - quartz monzodiorite - quartz diorite series and subordinate monzogranites. Chemically, the rocks are high-K calc-alkaline I-type granitoids (some reaching the shoshonitic series) with metaluminous of magnesium affinity. Trace-element tectonic discrimination is consistent with magmatism in a continental arc environment. Most rocks of this suite crystallized between 195 and 186 Ma (Early Jurassic, Pliensbachian), but locally some plutons yielded younger ages between 182 and 179 Ma (Early Jurassic, Toarcian). The eastern suite crops out in the eastern margin of the Upper Magdalena Valley, east of the Betania - El Agrado fault. Plutons of this unit belong to the monzogranite series with rock types ranging between syenogranites and granodiorites. They are high-K calc-alkaline continental granitoids, some metaluminous and some peraluminous, related to I-type granites generated in a volcanic arc. Crystallization of the suite was between 173 and 169 Ma (Middle Jurassic, Aalenian-Bajocian), but locally these rocks contain zircon with earlier inherited ages related to the magmatic pulse of the western suite between 182 and 179 Ma (Early Jurassic, Toarcian). The evolution of the Jurassic plutons in the Upper Magdalena Valley is best explained by onset or increase in subduction erosion of the accretionary prism. This explains the eastward migration of the arc away from the trench. Subduction of prism sediments increased the water flux from the subducting slab, decreasing solidus temperatures, therefore increasing the volume of magma and the amount of crustal melts involved in the magma. This is explains the crystallization of older and more primitive quartz-monzodiorite stocks in the west and the later crystallization of granitic bodies with batholitic dimensions in the east.

Late magmatic controls on the origin of schorlitic and foititic tourmalines from late-Variscan peraluminous granites of the Arbus pluton (SW Sardinia, Italy): Crystal-chemical study and petrological constraints

NASA Astrophysics Data System (ADS)

Bosi, Ferdinando; Naitza, Stefano; Skogby, Henrik; Secchi, Francesco; Conte, Aida M.; Cuccuru, Stefano; Hålenius, Ulf; De La Rosa, Nathaly; Kristiansson, Per; Charlotta Nilsson, E. J.; Ros, Linus; Andreozzi, Giovanni B.

2018-05-01

Tourmalines from the late-Variscan Arbus pluton (SW Sardinia) and its metamorphic aureole were structurally and chemically characterized by single-crystal X-ray diffraction, electron and nuclear microprobe analysis, Mössbauer, infrared and optical absorption spectroscopy, to elucidate their origin and relationships with the magmatic evolution during the pluton cooling stages. The Arbus pluton represents a peculiar shallow magmatic system, characterized by sekaninaite (Fe-cordierite)-bearing peraluminous granitoids, linked via AFC processes to gabbroic mantle-derived magmas. The Fe2+-Al-dominant tourmalines occur in: a) pegmatitic layers and pods, as prismatic crystals; b) greisenized rocks and spotted granophyric dikes, as clots or nests of fine-grained crystals in small miaroles locally forming orbicules; c) pegmatitic veins and pods close to the contacts within the metamorphic aureole. Structural formulae indicate that tourmaline in pegmatitic layers is schorl, whereas in greisenized rocks it ranges from schorl to fluor-schorl. Tourmalines in thermometamorphosed contact aureole are schorl, foitite and Mg-rich oxy-schorl. The main substitution is Na + Fe2+ ↔ □ + Al, which relates schorl to foitite. The homovalent substitution (OH) ↔ F at the O1 crystallographic site relates schorl to fluor-schorl, while the heterovalent substitution Fe2+ + (OH, F) ↔ Al + O relates schorl/fluor-schorl to oxy-schorl. Tourmaline crystallization in the Arbus pluton was promoted by volatile (B, F and H2O) enrichment, low oxygen fugacity and Fe2+ activity. The mineralogical evolutive trend is driven by decreasing temperature, as follows: sekaninaite + quartz → schorl + quartz → fluor-schorl + quartz → foitite + quartz. The schorl → foitite evolution represents a distinct trend towards (Al + □) increase and unit-cell volume decrease. These trends are typical of granitic magmas and consistent with Li-poor granitic melts, as supported by the absence of elbaite and other Li-minerals in the Arbus pluton. Tourmaline-bearing rocks reflect the petrogenetic significance of contribution from a metapelitic crustal component during the evolution of magmas in the middle-upper crust.

Distinctly different parental magmas for plutons and lavas in the central Aleutian arc

NASA Astrophysics Data System (ADS)

Cai, Y.; Rioux, M. E.; Kelemen, P. B.; Goldstein, S. L.; Bolge, L.; Kylander-Clark, A. R.

2014-12-01

While it is generally agreed that continental crust is generated by arc magmatism, average arc lavas are basaltic while the bulk continental crust is andesitic, and this has led to many models for secondary reprocessing of the arc crust in order to form continental crust. We report new data on calc-alkaline plutons in the central Aleutians showing that they have distinctly different sources compared to Holocene tholeiitic lavas. Therefore the lavas are not representative of the net magmatic transfer from the mantle into the arc crust. Eocene to Miocene (9-39 Ma) intermediate to felsic plutonic rocks from the central Aleutian arc show higher SiO2 at a given Mg#, higher ɛNd- and ɛHf-values, and lower Pb isotope ratios than Holocene volcanic rocks from the same region. Instead, the plutonic rocks resemble volcanics from the western Aleutians isotopically, and have chemical compositions similar to bulk continental crust. These data could reflect temporal variation of Aleutian magma source compositions, from Eocene-Miocene "isotopically depleted" and predominantly calc-alkaline to Holocene "isotopically enriched" and predominantly tholeiitic. Alternatively, they may reflect different transport and emplacement processes for the magmas that form plutons and lavas: calc-alkaline magmas with higher Si content and high viscosity may preferentially form plutons, perhaps after extensive mid-crustal degassing of initially high water contents. The latter case implies that the upper and middle arc crust is more like the calc-alkaline bulk composition of the continental crust than the lavas alone. Crustal reprocessing mechanisms that preserve upper and middle arc crust, while removing lower arc crust, can account for the genesis and evolution of continental crust. Since gabbroic lower arc crust extends from ca 20-40 km depth, and is density stable over most of this depth range, "delamination" of dense lithologies [1] may not be sufficient to accomplish this. Alternatively, subduction erosion of arc crust followed by "relamination" [2] of buoyant calc-alkaline rocks may be more effective. [1] e.g. Ringwood & Green, Tectonophysics 1966; Herzberg et al. Contributions to mineralogy and petrology 1983; [2] e.g. Hacker et al. Earth and Planetary Science Letters 2011.

Pairing Heterocyclic Cations with closo-Icosahedral Borane and Carborane Anions. II. Benchtop Alternative Synthetic Methodologies for Binary Triazolium and Tetrazolium Salts with Significant Water Solubility

DTIC Science & Technology

2010-04-01

produced from eutectic melts. Nat. Mater. 2008, 7, 626-630. 9. Any attempt at recrystallizing the 1:1 mixture of cations in (12) is likely to afford... recrystallizations . So, rather than recrystallizing each individual adduct, we concentrated on performing a careful spectroscopic examination of the...suggested. [1] While it is well-known that an admixture of two neutral compounds often affords eutectic behavior, we wondered whether or not the same

Ostwald ripening of clays and metamorphic minerals

USGS Publications Warehouse

Eberl, D.D.; Srodon, J.; Kralik, M.; Taylor, B.E.; Peterman, Z.E.

1990-01-01

Analyses of particle size distributions indicate that clay minerals and other diagenetic and metamorphic minerals commonly undergo recrystallization by Ostwald ripening. The shapes of their particle size distributions can yield the rate law for this process. One consequence of Ostwald ripening is that a record of the recrystallization process is preserved in the various particle sizes. Therefore, one can determine the detailed geologic history of clays and other recrystallized minerals by separating, from a single sample, the various particle sizes for independent chemical, structural, and isotopic analyses.

Orientation filtering for crystalline films

DOEpatents

Smith, Henry I.; Atwater, Harry A.; Thompson, Carl V.; Geis, Michael W.

1986-12-30

A substrate is coated with a film to be recrystallized. A pattern of crystallization barriers is created in the film, for example, by etching voids in the film. An encapsulation layer is generally applied to protect the film, fill the voids and otherwise enhance a recrystallization process. Recrystallization is carried out such that certain orientations pass preferentially through the barrier, generally as a result of growth-velocity anisotropy. The result is a film of a specific predetermined crystallographic orientation, a range of orientations or a set of discrete orientations.

Fracture controls on valley persistence: the Cairngorm Granite pluton, Scotland

NASA Astrophysics Data System (ADS)

Hall, A. M.; Gillespie, M. R.

2017-09-01

Valleys are remarkably persistent features in many different tectonic settings, but the reasons for this persistence are rarely explored. Here, we examine the structural controls on valleys in the Cairngorms Mountains, Scotland, part of the passive margin of the eastern North Atlantic. We consider valleys at three scales: straths, glens and headwater valleys. The structural controls on valleys in and around the Cairngorm Granite pluton were examined on satellite and aerial photographs and by field survey. Topographic lineaments, including valleys, show no consistent orientation with joint sets or with sheets of microgranite and pegmatitic granite. In this granite landscape, jointing is not a first-order control on valley development. Instead, glens and headwater valleys align closely to quartz veins and linear alteration zones (LAZs). LAZs are zones of weakness in the granite pluton in which late-stage hydrothermal alteration and hydro-fracturing have greatly reduced rock mass strength and increased permeability. LAZs, which can be kilometres long and >700 m deep, are the dominant controls on the orientation of valleys in the Cairngorms. LAZs formed in the roof zone of the granite intrusion. Although the Cairngorm pluton was unroofed soon after emplacement, the presence of Old Red Sandstone (ORS) outliers in the terrain to the north and east indicates that the lower relief of the sub-ORS basement surface has been lowered by <500 m. Hence, the valley patterns in and around the Cairngorms have persisted through >1 km of vertical erosion and for 400 Myr. This valley persistence is a combined product of regionally low rates of basement exhumation and of the existence of LAZs in the Cairngorm pluton and sub-parallel Caledonide fractures in the surrounding terrain with depths that exceed 1 km.

Igneous petrogenesis and tectonic setting of granitic rocks from the eastern Blue Ridge, Alabama Appalachians

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drummond, M.S.; Allison, D.T.; Tull, J.F.

1994-03-01

A span of 150 my of orogenic activity is recorded within the granitic rocks of the eastern Blue Ridge of Alabama (EBR). Four discrete episodes of plutonism can be differentiated, each event exhibiting distinct field relations and geochemical signatures. (1) Penobscotian stage: this initial stage of plutonic activity is represented by the Elkahatchee Quartz Diorite (EQD), a premetamorphic (495 Ma) batholith and the largest intrusive complex (880 km[sup 2]) exposed in the Blue Ridge. Calc-alkaline I-type tonalite-granodiorite are the principal lithologies, with subordinate cumulate hbl-bt diorite, metadacite, granite and trondhjemite. The parental tonalitic magmas are interpreted to have been derivedmore » from a subducted MORB source under eclogite to get amphibolite conditions. (2) Taconic stage: the Kowaliga augen gneiss (KAG) and the Zana granite gneiss (ZG) are 460 Ma granitic bodies that reside in the SE extremity and structurally highest portion of the EBR. Both of these bodies are pre-metamorphic with strongly elongate sill- and pod-like shapes concordant with S[sub 1] foliation. Granite and granodiorite comprise the bulk of the KAG. (3) Acadian stage: Rockford Granite (RG), Bluff springs Granite (BSG, 366 Ma), and Almond Trondhjemite represent a suite of pre- to syn-metamorphic granitic intrusions. (4) late-Acadian stage: The Blakes Ferry pluton (BFP) is a post-kinematic pluton displaying spectacular by schlieren igneous flow structures, but no metamorphic fabric. The pluton's age can be bracketed between a 366 Ma age on the BSG and a 324 Ma K-Ar muscovite age on the BFP. BFP's petrogenesis has involved partial melting a MORB source followed by assimilation of metasedimentary host rock.« less

Magnetic Fabrics of Biotite- and Tourmaline-bearing Granites : The Carnmenellis and Bodmin Plutons (british Cornwall)

NASA Astrophysics Data System (ADS)

Nguema, T. Minstsa Mi; Bouchez, J. L.

In order to extract geological information about the possible emplacement mode of the late-Variscan granite plutons of British Cornwall, detailed petro-structural studies, including magnetic fabric coverages, have been performed in Carnmenellis and Bodmin plutons. The behaviour of these granites is paramagnetic (no magnetite). However, tourmaline is ubiquitous in addition to biotite and iron-bearing muscovite. Since tourmaline has an «inverse» magneto-crystalline intrinsic anisotropy, its magnetic signal perturbates th e easy-to-interpret signal carried by the phyllosilicates. In order to overcome the magnetic signal of tourmaline, most specimens were in-air heated at 650°C during 2 hours. This helped growing magnetite grains out of biotite. These new magnetites, that are demonstrated to be magnetically mimetic with respect to biotite, re-inforce dramatically the magnetic signal of the phyllosilicates. A new structural map of Carnmenellis, obtained from after-heating AMS measurements, is compared with the original one. A dominant NW-SE trend of shallowly plunging lineations is reinforced and is attributed to magma stretch along this direction during pluton emplacement within its overlying country rocks. This agrees with some of Ghosh's field measurements (1934), and with already existing regional reconstructions. In addition, a conspicuous NE-SW lineation trend is revealed, in places where the tourmaline content is possibly the highest, particularly along a NE-SW trending corridor crossing through the pluton at its center. These NE-SW trending domains and lineations are ascribed to late-magmatic tension- gashes along which the magma was flowing and the late, boron-enriched, fluids were collected. The preliminary results obtained from Bodmin (work in progress) will be presented and compared with those of Carnmenellis, and integrated into the regional geology frame of western England.

Igneous history of the aubrite parent asteroid - Evidence from the Norton County enstatite achondrite

NASA Technical Reports Server (NTRS)

Okada, Akihiko; Keil, Klaus; Taylor, G. Jeffrey; Newsom, Horton

1988-01-01

Numerous specimens of the Norton County enstatite achondrite (aubrite) were studied by optical microscopy, electron microprobe, and neutron-activation analysis. Norton County is found to be a fragmental impact breccia, consisting of a clastic matrix made mostly of crushed enstatite, into which are embedded a variety of mineral and lithic clasts of both igneous and impact melt origin. The Norton County precursor materials were igneous rocks, mostly plutonic orthopyroxenites, not grains formed by condensation from the solar nebula. The Mg-silicate-rich aubrite parent body experienced extensive melting and igneous differentiation, causing formation of diverse lithologies including dunites, plutonic orthopyroxenites, plutonic pyroxenites, and plagioclase-silica rocks. The presence of impact melt breccias (the microporphyritic clasts and the diopside-plagioclase-silica clast) of still different compositions further attests to the lithologic diversity of the aubrite parent body.

Geology and tectonics of the Archean Superior Province, Canadian Shield

NASA Technical Reports Server (NTRS)

Card, K. D.

1986-01-01

Superior Province consists mainly of Late Archean rocks with Middle Archean gneisses in the south, and possibly in the north. The Late Archean supracrustal sequences are of island arc and interarc affinity and are cut by abundant plutonic rocks, including early arc-related intrusions, late synorogenic intrusions, and post-orogenic plutons that are possibly the product of crustal melting caused by thermal blanketing of newly-thickened continental crust combined with high mantle heat flux. The contemporaneity of magmatic and deformational events along the lengths of the belts is consistent with a subduction-dominated tectonic regime for assembly of the Kenoran Orogen. Successive addition of volcanic arcs accompanied and followed by voluminous plutonism resulted in crustal thickening and stabilization of the Superior craton prior to uplift of Kapuskasing granulites, emplacement of the Matachewan diabase dykes, and Early Proterozoic marginal rifting.

Nested granites in question: Contrasted emplacement kinematics of independent magmas in the Zaër pluton, Morocco

NASA Astrophysics Data System (ADS)

Bouchez, Jean Luc; Diot, Herve

1990-10-01

The concentrically zoned Zaër pluton (Variscan Meseta of Morocco), previously modeled as the nesting of two magmas forming a ballooning pluton, is here subjected to a study of its internal magmatic and solid-state structures. The magmatic flow patterns, derived mainly from anisotropy of magnetic susceptibility measurements, together with structural observations down to thin-section scale, indicate that these two magmas have undergone totally independent kinematics of emplacement. This supports recent isotope geochemistry and geochronology data indicating independent origin of the magmas and diachronism of emplacement, respectively. Thus, we propose that a magma diapir, probably emplaced within a crustal fracture zone, cooled down to brittle conditions, before a likely flat-lying fracture was opened within the fracture zone and was filled with a new and compositionally different pulse of magma.

Geochemistry of speleothems affected by aragonite to calcite recrystallization - Potential inheritance from the precursor mineral

NASA Astrophysics Data System (ADS)

Domínguez-Villar, David; Krklec, Kristina; Pelicon, Primož; Fairchild, Ian J.; Cheng, Hai; Edwards, Lawrence R.

2017-03-01

Formerly aragonite speleothems recrystallized to calcite result from solutions subsaturated in aragonite and supersaturated in calcite that infiltrate into the speleothem through the interconnected porosity. In most cases, the crystal replacement takes place through a thin solution film. This diagenetic process can occur under open or semi-closed geochemical conditions. Thus, secondary calcite crystals record the composition of the fluid at the time of diagenesis affected by calcite partition coefficients and fractionation factors (open system) or partly inherit the composition of the primary aragonite (semi-closed system). So, whether or not recrystallized aragonite speleothems can record reliable geochemical signals from the time of speleothem primary deposition still is an open debate. We studied a stalagmite from Eagle Cave (Spain) predominantly composed of secondary calcite that replaced aragonite, although a core of primary aragonite extending 45 mm along the growth direction was preserved at the base of the sample. We obtained Mg and Sr compositional maps, paired U-Th dating and δ18O and δ13C profiles across the diagenetic front. Additionally, two parallel isotope records were obtained along the speleothem growth direction in the aragonite and calcite sectors. Our results support that recrystallization of this speleothem took place in open system conditions for δ18O, δ13C, Mg and Sr, but in semi-closed system conditions for U and Th. The recrystallization of this sample took place during one or several events, likely after the Younger Dryas as a result of climate change influencing drip water composition. Based on compositional zoned patterns, we suggest that the advance of diagenetic fronts in this speleothem had an average rate of 50 ± 45 μm/yr. Such recrystallization rate can transform any aragonite speleothem into calcite within a few centuries. We suggest that the volume of water interacting with the speleothem at the time of recrystallization is of critical importance for inheritance of different elements. The volume of solution is controlled by (1) the discharge of water passing through the sample and (2) the lapse time between aragonite dissolution and calcite precipitation. Hydrology and hydrochemistry of the interacting solution, together with the mineralogy and texture of the speleothem are the essential controls for the diagenesis of the speleothem. Recrystallization of aragonite speleothems does not follow stratigraphical levels of the sample but occurs along sites with preferential flow paths in any sector of the speleothem. In these cases the relationship between age and distance from base is not preserved. However, alternation of periods of recrystallization with periods of aragonite precipitation causing speleothem accretion can result in recrystallized speleothems with coherent distance from the base-age relationship. Thus, early diagenesis of speleothems affected by seasonal or inter-annual oscillation of drip waters supersaturated and subsaturated in aragonite may provide best-scenario conditions for dating and preservation of paleoenvironmental records along recrystallized speleothems. However, even in this scenario, the variable discharge and the diagenetic rate control the geochemical inheritance from the primary aragonite crystals.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Shenyang; Lavender, Curt A.; Joshi, Vineet V.

Recrystallization plays an important role in swelling kinetics of irradiated metallic nuclear fuels. This talk will present a three-dimensional microstructure-dependent swelling model by integrating the evolution of intra-and inter- granular gas bubbles, dislocation loop density, and recrystallization.

Recrystallization characteristics and interfacial oxides on the compression bonding interface

NASA Astrophysics Data System (ADS)

Xie, Bijun; Sun, Mingyue; Xu, Bin; Li, Dianzhong

2018-05-01

Up to now, the mechanism of interface bonding is still not fully understood. This work presents interfacial characteristics of 316LN stainless steel bonding joint after cold compression bonding with subsequent annealing. EBSD analysis shows that fine recrystallization grains preferentially appear near the bonding interface and grow towards both sides of the interface. Transmission electron microscopy reveals that initial cold compression bonding disintegrates the native oxide scales and brings pristine metal from both sides of the interface come into intimate contact, while the broken oxide particles are remained at the original interface. The results indicate that partial bonding can be achieved by cold compression bonding with post-annealing treatment and recrystallization firstly occurs along the bonding interface. However, the interfacial oxides impede the recrystallization grains step over the interface and hinder the complete healing of the bonding interface.

Recrystallization as a controlling process in the wear of some f.c.c. metals

NASA Technical Reports Server (NTRS)

Bill, R. C.; Wisander, D.

1977-01-01

Detailed examination of copper specimens after sliding against 440 C steel in liquid methane at speeds up to 25 m/s and loads of up to 2 kg showed the metal comprising the wear surface to possess a fine cell recrystallized structure. Wear proceeded by the plastic shearing of metal in this near surface region without the occurrence of visible metal transfer. A dynamic balance between the intense shear process at the surface and the nucleation of recrystallized grains was proposed to account for the behavior of the metal at the wear surface. Sliding wear experiments were also conducted on Ag, Cu-10% Al, Cu-10% Sn, Ni and Al. It was found that low wear and the absence of heavy metal transfer were associated with those metals observed to undergo recrystallization nucleation without prior recovery.

Recrystallization characteristics of oxide dispersion strengthened nickel-base alloys

NASA Technical Reports Server (NTRS)

Hotzler, R. K.; Glasgow, T. K.

1980-01-01

Electron microscopy was employed to study the process of recrystallization in two oxide dispersion strengthened (ODS) mechanically alloyed nickel-base alloys, MA 754 and MA 6000E. MA 754 contained both fine, uniformly dispersed particles and coarser oxides aligned along the working direction. Hot rolled MA 754 had a grain size of 0.5 microns and high dislocation densities. After partial primary recrystallization, the fine grains transformed to large elongated grains via secondary (or abnormal) grain growth. Extruded and rolled MA 6000E contained equiaxed grains of 0.2 micron diameter. Primary recrystallization occurring during working eliminated virtually all dislocations. Conversion from fine to coarse grains was triggered by gamma prime dissolution; this was also a process of secondary or abnormal grain growth. Comparisons were made to conventional and oxide dispersion strengthened nickel-base alloys.

Dynamic Recrystallization of the Constituent γ Phase and Mechanical Properties of Ti-43Al-9V-0.2Y Alloy Sheet

PubMed Central

Zhang, Yu; Wang, Xiaopeng; Kong, Fantao

2017-01-01

A crack-free Ti-43Al-9V-0.2Y alloy sheet was successfully fabricated via hot-pack rolling at 1200 °C. After hot-rolling, the β/γ lamellar microstructure of the as-forged TiAl alloy was completely converted into a homogeneous duplex microstructure with an average γ grain size of 10.5 μm. The dynamic recrystallization (DRX) of the γ phase was systematically investigated. A recrystallization fraction of 62.5% was obtained for the γ phase in the TiAl alloy sheet, when a threshold value of 0.8° was applied to the distribution of grain orientation spread (GOS) values. The high strain rate and high stress associated with hot-rolling are conducive for discontinuous dynamic recrystallization (DDRX) and continuous dynamic recrystallization (CDRX), respectively. A certain high-angle boundary (HAGB: θ = 89° ± 3°<100>), which is associated with DDRX, occurs in both the recrystallized and deformed γ grains. The twin boundaries play an important role in the DDRX of the γ phase. Additionally, the sub-structures and sub-boundaries originating from low-angle boundaries in the deformed grains also indicate that CDRX occurs. The mechanical properties of the alloy sheet were determined at both room and elevated temperatures. At 750 °C, the alloy sheet exhibited excellent elongation (53%), corresponding to a failure strength of 467 MPa. PMID:28914797

Review of potential host rocks for radioactive waste disposal in the southeast United States-Southern Piedmont subregion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-10-01

A literature study was conducted on the geology of the Southern Piedmont province in the states of Maryland, Virginia, North Carolina, South Carolina, and Georgia. The purpose was to identify geologic areas potentially suitable for containment of a repository for the long-term isolation of solidified radioactive waste. The crystalline rocks of the Southern Piedmont province range in age from Precambrian to Paleozoic, and are predominantly slates, phyllites, argillites, schists, metavolcanics, gneisses, gabbros, and granites. These rock units were classified as either favorable, potentially favorable, or unfavorable as potential study areas based on an evaluation of the geologic, hydrologic, and geotechnicalmore » characteristics. No socio-economic factors were considered. Rocks subjected to multiple periods of deformation and metamorphism, or described as highly fractured, or of limited areal extent were generally ranked as unfavorable. Potentially favorable rocks are primarily the high-grade metamorphic gneisses and granites. Sixteen areas were classified as being favorable for additional study. These areas are primarily large igneous granite plutons as follows: the Petersburg granite in Virginia; the Rolesville-Castallia, Churchland, and Landis plutons in North Carolina; the Liberty Hill, Winnsboro, and Ogden plutons in South Carolina; and the Siloam, Elberton, and six unnamed granite plutons in Georgia.« less

[Discussion on diagenesis of Xilingang pluton-constrained by X-ray Fluorescence spectroscopy, plasma mass spectrometry and Raman spectroscopy].

PubMed

Tang, Yu-Kun; Chen, Guo-Neng; Zhang, Ke; Huang, Hai-Hua

2013-05-01

The results on Xilingang pluton, mainly consisting of red beds, granites containing numerous debris of red beds and granites, obtained by X-ray fluorescence spectroscopy, plasma mass spectrometry and Raman spectroscopy show: (1) Xilingang pluton from red beds, granites containing numerous debris of red beds to granites has obvious characteristics of decreasing silicon and alkali content, and rising ignition loss, dark mineral content and oxidation index; (2) Chondrite-normalized REE distribution curves and primitive mantle-normalized spider diagram for trace elements of redbed, granites containing numerous debris of red beds and granites have a good consistency, the distribution characteristics of elements are similar to Nanling transformation-type granite; (3) The value of Raman spectrogram characteristic peak of quartz crystal in Xilingang granite decreased from the center of quartz crystal, and FWHM is steady. According to the above, the authors believe that Xilingang granite formed was related to in-situ melting of red beds and underlying strata and magma consolidation. Volatile components were discharged continuously, and oxidation index decreased gradually in the melting process. In the process of diagenesis, the top of pluton tend to be an ongoing silicon and alkali increase, while TFeO and MgO continue to migrate to bottom, and crystallization environment is a relatively closed and steady system.

Erupted frothy xenoliths may explain lack of country-rock fragments in plutons

PubMed Central

Burchardt, Steffi; Troll, Valentin R.; Schmeling, Harro; Koyi, Hemin; Blythe, Lara

2016-01-01

Magmatic stoping is discussed to be a main mechanism of magma emplacement. As a consequence of stoping, abundant country-rock fragments should occur within, and at the bottom of, magma reservoirs as “xenolith graveyards”, or become assimilated. However, the common absence of sufficient amounts of both xenoliths and crustal contamination have led to intense controversy about the efficiency of stoping. Here, we present new evidence that may explain the absence of abundant country-rock fragments in plutons. We report on vesiculated crustal xenoliths in volcanic rocks that experienced devolatilisation during heating and partial melting when entrained in magma. We hypothesise that the consequential inflation and density decrease of the xenoliths allowed them to rise and become erupted instead of being preserved in the plutonic record. Our thermomechanical simulations of this process demonstrate that early-stage xenolith sinking can be followed by the rise of a heated, partially-molten xenolith towards the top of the reservoir. There, remnants may disintegrate and mix with resident magma or erupt. Shallow-crustal plutons emplaced into hydrous country rocks may therefore not necessarily contain evidence of the true amount of magmatic stoping during their emplacement. Further studies are needed to quantify the importance of frothy xenolith in removing stoped material. PMID:27804996

A tale of 10 plutons - Revisited: Age of granitic rocks in the White Mountains, California and Nevada

USGS Publications Warehouse

McKee, E.H.; Conrad, J.E.

1996-01-01

40Ar/39Ar incremental heating analysis and conventional K-Ar age determinations on plutonic rocks of the White Mountains define two stages of magmatic emplacement: Late Cretaceous, between ca. 90 Ma and 75 Ma, and Middle-Late Jurassic, between ca. 180 and 140 Ma. The Jurassic stage can be divided into two substages, 180-165 Ma and 150-140 Ma. Thermal effects of the younger plutons on the older granitoids partially to completely reset ages, making it difficult to determine the age of emplacement and cooling of several of the plutons even by 40Ar/39Ar incremental heating analyses. New data together with published ages and regional geochronological synthesis of the Sierra Nevada batholith indicate that regions within the batholith have coherent periods or episodes of magmatic activity. In the White Mountains and Sierra Nevada directly to the west there was little or no activity in Early Jurassic and Early Cretaceous time; magmatism took place during relatively short intervals of 15 m.y. or less in the Middle and Late Jurassic and Late Cretaceous periods. The new K-Ar and 40Ar/39Ar analyses of granitoids from the White Mountains help, but do not completely clarify the complex history of emplacement, cooling, and reheating of the batholith.

Relative contributions of crust and mantle to generation of Campanian high-K calc-alkaline I-type granitoids in a subduction setting, with special reference to the Harşit Pluton, Eastern Turkey

NASA Astrophysics Data System (ADS)

Karsli, Orhan; Dokuz, Abdurrahman; Uysal, Ibrahim; Aydin, Faruk; Chen, Bin; Kandemir, Raif; Wijbrans, Jan

2010-10-01

We present elemental and Sr-Nd-Pb isotopic data for the magmatic suite (~79 Ma) of the Harşit pluton, from the Eastern Pontides (NE Turkey), with the aim of determining its magma source and geodynamic evolution. The pluton comprises granite, granodiorite, tonalite and minor diorite (SiO2 = 59.43-76.95 wt%), with only minor gabbroic diorite mafic microgranular enclaves in composition (SiO2 = 54.95-56.32 wt%), and exhibits low Mg# (<46). All samples show a high-K calc-alkaline differentiation trend and I-type features. The chondrite-normalized REE patterns are fractionated [(La/Yb) n = 2.40-12.44] and display weak Eu anomalies (Eu/Eu* = 0.30-0.76). The rocks are characterized by enrichment of LILE and depletion of HFSE. The Harşit host rocks have weak concave-upward REE patterns, suggesting that amphibole and garnet played a significant role in their generation during magma segregation. The host rocks and their enclaves are isotopically indistinguishable. Sr-Nd isotopic data for all of the samples display I Sr = 0.70676-0.70708, ɛ Nd(79 Ma) = -4.4 to -3.3, with T DM = 1.09-1.36 Ga. The lead isotopic ratios are (206Pb/204Pb) = 18.79-18.87, (207Pb/204Pb) = 15.59-15.61 and (208Pb/204Pb) = 38.71-38.83. These geochemical data rule out pure crustal-derived magma genesis in a post-collision extensional stage and suggest mixed-origin magma generation in a subduction setting. The melting that generated these high-K granitoidic rocks may have resulted from the upper Cretaceous subduction of the Izmir-Ankara-Erzincan oceanic slab beneath the Eurasian block in the region. The back-arc extensional events would have caused melting of the enriched subcontinental lithospheric mantle and formed mafic magma. The underplating of the lower crust by mafic magmas would have played a significant role in the generation of high-K magma. Thus, a thermal anomaly induced by underplated basic magma into a hot crust would have caused partial melting in the lower part of the crust. In this scenario, the lithospheric mantle-derived basaltic melt first mixed with granitic magma of crustal origin at depth. Then, the melts, which subsequently underwent a fractional crystallization and crustal assimilation processes, could ascend to shallower crustal levels to generate a variety of rock types ranging from diorite to granite. Sr-Nd isotope modeling shows that the generation of these magmas involved ~65-75% of the lower crustal-derived melt and ~25-35% of subcontinental lithospheric mantle. Further, geochemical data and the Ar-Ar plateau age on hornblende, combined with regional studies, imply that the Harşit pluton formed in a subduction setting and that the back-arc extensional period started by least ~79 Ma in the Eastern Pontides.

Recrystallization and grain growth induced by ELMs-like transient heat loads in deformed tungsten samples

NASA Astrophysics Data System (ADS)

Suslova, A.; El-Atwani, O.; Sagapuram, D.; Harilal, S. S.; Hassanein, A.

2014-11-01

Tungsten has been chosen as the main candidate for plasma facing components (PFCs) due to its superior properties under extreme operating conditions in future nuclear fusion reactors such as ITER. One of the serious issues for PFCs is the high heat load during transient events such as ELMs and disruption in the reactor. Recrystallization and grain size growth in PFC materials caused by transients are undesirable changes in the material, since the isotropic microstructure developed after recrystallization exhibits a higher ductile-to-brittle transition temperature which increases with the grain size, a lower thermal shock fatigue resistance, a lower mechanical strength, and an increased surface roughening. The current work was focused on careful determination of the threshold parameters for surface recrystallization, grain growth rate, and thermal shock fatigue resistance under ELM-like transient heat events. Transient heat loads were simulated using long pulse laser beams for two different grades of ultrafine-grained tungsten. It was observed that cold rolled tungsten demonstrated better power handling capabilities and higher thermal stress fatigue resistance compared to severely deformed tungsten. Higher recrystallization threshold, slower grain growth, and lower degree of surface roughening were observed in the cold rolled tungsten.

Effect of alloying elements and coiling temperature on the recrystallization behavior and the bainitic transformation in TRIP steels

NASA Astrophysics Data System (ADS)

Han, Seongho; Seong, Hwangoo; Ahn, Yeonsang; Garcia, C. I.; DeArdo, A. J.; Kim, Inbae

2009-08-01

The effects of alloying elements and coiling temperature on recrystallization behavior and bainitic transformation were investigated based on 0.07C-Mn-Cr-Nb steel with a low carbon equivalent. Based on the ferrite recrystallization behavior, the proper intercritical annealing temperature of all studied steels was suggested to produce TRIP steel with good strength and elongation balance. All steels coiled at 550 °C showed much faster ferrite recrystallization behavior than steels coiled at 700 °C. In addition to the coiling temperature, the effect of increasing carbon content on the ferrite recrystallization was minor at a coiling temperature of 550 °C, but much more prominent at a coiling temperature of 700 °C. The highest Mo added steel showed the best strength and elongation balance, and the highest carbon and Mo added steel showed the highest tensile strength at a coiling temperature of 550 °C. The steel containing a higher amount of elemental Al (0.7 wt.% Al) exhibited much better elongation than the lower Al added steel (0.04 wt.% Al) in TS 780 MPa grade, about 24 % and 19 %, respectively.

Solid dispersion of acetaminophen and poly(ethylene oxide) prepared by hot-melt mixing.

PubMed

Yang, Min; Wang, Peng; Huang, Chien-Yueh; Ku, M Sherry; Liu, Huiju; Gogos, Costas

2010-08-16

In this study, a model drug, acetaminophen (APAP), was melt mixed with poly(ethylene oxide) (PEO) using a Brabender mixer. APAP was found to recrystallize upon cooling to room temperature for all the drug loadings investigated. Higher drug loading leads to faster recrystallization rate. However, the morphology of the recrystallized drug crystals is identical in samples with different drug loadings and does not change with the storage time. To adjust the drug's dissolution rate, nanoclay Cloisite 15A and 30B were added into the binary mixture. The presence of either of the nanoclay dramatically accelerates the drug's recrystallization rate and slows down the drug's releasing rate. The drop of the releasing rate is mainly due to the decrease of wettability, as supported by the contact angle data. Data analysis of the dissolution results suggests that the addition of nanoclays changes the drug's release mechanism from erosion dominant to diffusion dominant. This study suggests that nanoclays may be utilized to tailor the drug's releasing rate and to improve the dosage form's stability by dramatically shortening the lengthy recrystallization process. Copyright (c) 2010 Elsevier B.V. All rights reserved.

Recrystallization and grain growth induced by ELMs-like transient heat loads in deformed tungsten samples

PubMed Central

Suslova, A.; El-Atwani, O.; Sagapuram, D.; Harilal, S. S.; Hassanein, A.

2014-01-01

Tungsten has been chosen as the main candidate for plasma facing components (PFCs) due to its superior properties under extreme operating conditions in future nuclear fusion reactors such as ITER. One of the serious issues for PFCs is the high heat load during transient events such as ELMs and disruption in the reactor. Recrystallization and grain size growth in PFC materials caused by transients are undesirable changes in the material, since the isotropic microstructure developed after recrystallization exhibits a higher ductile-to-brittle transition temperature which increases with the grain size, a lower thermal shock fatigue resistance, a lower mechanical strength, and an increased surface roughening. The current work was focused on careful determination of the threshold parameters for surface recrystallization, grain growth rate, and thermal shock fatigue resistance under ELM-like transient heat events. Transient heat loads were simulated using long pulse laser beams for two different grades of ultrafine-grained tungsten. It was observed that cold rolled tungsten demonstrated better power handling capabilities and higher thermal stress fatigue resistance compared to severely deformed tungsten. Higher recrystallization threshold, slower grain growth, and lower degree of surface roughening were observed in the cold rolled tungsten. PMID:25366885

Recrystallization of water in non-water-soluble (meth)acrylate polymers is not rare and is not devitrification.

PubMed

Gemmei-Ide, Makoto; Ohya, Atsushi; Kitano, Hiromi

2012-02-16

Change in the state of water sorbed into four kinds of non-water-soluble poly(meth)acrylates with low water content by temperature (T) perturbation was examined on the basis of T variable mid-infrared (MIR) spectroscopy. Many studies using differential scanning calorimetry suggested that there was no change in the state. T dependence of their MIR spectra, however, clearly demonstrated various changes in the state. Furthermore, recrystallization, which was crystallization during heating, was observed in all four polymers. The recrystallization observed in this study was not devitrification, which is the change in the state from glassy water to crystalline water, but vapor deposition during heating (vapor re-deposition). There were only two reports about recrystallization of water in a non-water-soluble polymer before this report; therefore, it might be considered to be a rare phenomenon. However, as demonstrated in this study, it is not a rare phenomenon. Recrystallization (vapor re-deposition) of water in the polymer matrices is related to a balance between flexibility and strength of the electrostatic interaction sites of polymer matrices but might not be related to the biocompatibility of polymers.

Recrystallization and grain growth induced by ELMs-like transient heat loads in deformed tungsten samples.

PubMed

Suslova, A; El-Atwani, O; Sagapuram, D; Harilal, S S; Hassanein, A

2014-11-04

Tungsten has been chosen as the main candidate for plasma facing components (PFCs) due to its superior properties under extreme operating conditions in future nuclear fusion reactors such as ITER. One of the serious issues for PFCs is the high heat load during transient events such as ELMs and disruption in the reactor. Recrystallization and grain size growth in PFC materials caused by transients are undesirable changes in the material, since the isotropic microstructure developed after recrystallization exhibits a higher ductile-to-brittle transition temperature which increases with the grain size, a lower thermal shock fatigue resistance, a lower mechanical strength, and an increased surface roughening. The current work was focused on careful determination of the threshold parameters for surface recrystallization, grain growth rate, and thermal shock fatigue resistance under ELM-like transient heat events. Transient heat loads were simulated using long pulse laser beams for two different grades of ultrafine-grained tungsten. It was observed that cold rolled tungsten demonstrated better power handling capabilities and higher thermal stress fatigue resistance compared to severely deformed tungsten. Higher recrystallization threshold, slower grain growth, and lower degree of surface roughening were observed in the cold rolled tungsten.

Geochronology and Structural Studies in the Northern Ritter Range: Implications for the Tectonic History of Mesozoic Sierra Nevada Arc

NASA Astrophysics Data System (ADS)

Black, C. J.; Whitesides, A. S.; Anderson, J. L.; Culbert, K. N.; Vandeveer, M.; Cox, I. V.; Cardamone, J.; Torrez, G.; Quirk, M.; Memeti, V.; Cao, W.; Paterson, S. R.

2010-12-01

Field mapping in the Northern Ritter Range pendant, central Sierra Nevada reveals four different lithotectonic units. Unit 1, east of Gem Lake, consists of Paleozoic passive margin metasedimentary rocks. Unit 2 lies unconformably above and west and is composed of Late Triassic to Middle Jurassic rhyolitic to andesitic, clast-rich, metavolcanic rocks that are typically massive, thick bedded, relatively homogeneous. Breccias and millimeter sized plagioclase phenocrysts are common in these beds. Unit 3 west of and structurally higher than unit 2 and is composed of thinly bedded metavolcanic and metasedimentary rocks of same age. Unit 2 and Unit 3 both steeply dipping and NW striking bedding and bedding parallel foliations. Unit 4 is composed of less deformed, Cretaceous, rhyolitic to andesitic breccias and rare volcaniclastic units that are west of and unconformably above unit 3. All units are now separated by faults. The Cretaceous dextral, oblique Gem Lake shear zone reactivated the uncomformity between units 1 and 2. West of the shear zone, both the shearing and strain intensity gradually decrease, the later from >60% to 40% shortening. Unit 2 and 3 are separated by a thrust fault, with local pseudotachelite now overprinted by ductile deformation. Unit 3 and 4 are now juxtaposed along a deformed unconformity west of which strain decreases to shortening values > 30%. These host rocks are intruded by granitic to dioritic plutons preserving a wide range of internal characteristics and emplacement styles. The oldest pluton is the 100 Ma Rush Creek Granodiorite, which intruded into unit 2. The Kuna Crest (KC, 94.6 Ma), the Waugh Lake (WL, 93.6 Ma), and the Thousand Island Lake leucogranodiorites (TIL) (~94 Ma) all intrude into the unit 3. The TIL cut the unconformity between units 3 and 4. The WL pluton is possibly cut by movement between units 2 and 3. The typically NW striking steeply dipping bedding in host rock units is dramatically deflected to EW orientations along the SW margin of the KC lobe. Within the nearby WL Granodiorite, hundreds of andesitic host rock blocks, some up to hundred meter lengths suggest that stoping was an important emplacement process. Migmatitic zones occur along several pluton margins. Our observations are consistent with aspects of the Tobisch et al. (2000) paper suggesting early brittle thrusting led to rotation of beds to steep dips. However our results indicate that beds were already at near vertical dips prior to ductile shortening and well before pluton emplacement. And although regional downward flow of extrusive volcanics has certainly occurred we see evidence against previous suggestions that this downward flow was localized in pluton aureoles as plutons typically cut discordantly across already steeply dipping beds and in turn are deformed by the younger ductile deformation. Although ductile shortening may play a minor role in rotation of beds, much of the ductile deformation had to occur after beds were steeply dipping as the 100-93.5 m.y. plutons have fabrics that are continuous with ductile deformation in the host rocks.

Orogenic potassic mafic magmatism, a product of alkaline-peraluminous mixing ? Variscan 'calc-alkaline' rocks from the Central Iberian and Ossa Morena Zones, Central Spain.

NASA Astrophysics Data System (ADS)

Scarrow, Jane H.; Cambeses, Aitor; Bea, Fernando; Montero, Pilar; Molina, José F.; Moreno, Juan Antonio

2013-04-01

Orogenic magmatic rocks provide information about mantle and crust melt-generation and -interaction processes. In this context, minor potassic mafic stocks which are formed of enriched mantle and crustal components and are common as late-orogenic intrusions in granitic plutons give insight into the timing of new crust formation and crustal recycling. Potassic mafic stocks are prevalent, albeit low volume, constituents of granite batholiths all through the European Variscan (350-280 Ma). In the Central Iberia Zone, Spanish Central System, crustal-melt, S-type, granitoid plutons are intruded by minor concomitant ultramafic-intermediate appinitic-vaugneritic stocks. Notwithstanding their whole-rock calc-alkaline composition, the stocks apparently did not have a subduction-related origin. Recent studies have attributed their genesis to mixing of alkaline mantle and peraluminous crustal melts. Their primary alkaline character, as indicated by amphibole and biotite mineral chemistry data, points, rather, towards an extension-related genesis. In the Ossa Morena Zone, south of the Central Iberian Zone, the igneous rocks also have a whole-rock calc-alkaline composition which has been considered to be the result of northward subduction of the South Portuguese Zone. Nevertheless, identification of a 'sill' of significant volume of mafic magma in the middle crust, the ´IBERSEIS reflective body', in a seismic profile across the Ossa Morena and South Portuguese Zones has cast doubt upon the calc-alkaline magmatism-subduction model; leading, instead, to the magmatism being attributed to intra-orogenic extension related to a mantle plume active from 340 Ma to 330 Ma. The aim here, then, is to reinvestigate the petrogenesis and age of the calc-alkaline rocks of the Ossa Morena Zone to determine their tectonomagmatic context be it subduction-, plume- or extension-related, and establish what they may reveal about mantle-crust interactions. Focussing, initially, on the Valencia del Ventoso pluton, preliminary mineral chemistry, whole-rock and isotope data indicate that rather than a single-stage cogenetic calc-alkaline intrusion, the pluton is a multi-stage composite of compositionally diverse stocks. Including the metaluminous calc-alkaline Medina de las Torres gabbro and Cortijo del Pozuelo granite to the concentrically zone alkaline core though to calk-alkaline border of the main pluton. In addition, an associated older peraluminous La Jineta granite body and younger cross-cutting tholeiitic dykes crop out in the same region. Here we present new U-Pb single zircon IBERSIMS SHRIMP data which indicate that the compositionally diverse main pluton and associated stocks are contemporaneous at 334 ± 2 Ma. So, rather than reflecting reactivation of a zone of lithospheric weakness by successive magmatic events it appears that at Valencia del Ventoso diverse mantle and crustal sources were being tapped simultaneously. We suggest that this is linked to the generation of and thermal anomaly associated with the coeval ´IBERSEIS reflective body'. The question is, then, if other 'calc-alkaline' plutons have similar compositional, and so, possible tectonomagmatic complexity. To test this hypothesis studies are currently underway of the Ossa Morena Zone Burguillos del Cerro and Brovales plutons.

Orientation filtering for crystalline films

DOEpatents

Smith, H.I.; Atwater, H.A.; Thompson, C.V.; Geis, M.W.

1986-12-30

A substrate is coated with a film to be recrystallized. A pattern of crystallization barriers is created in the film, for example, by etching voids in the film. An encapsulation layer is generally applied to protect the film, fill the voids and otherwise enhance a recrystallization process. Recrystallization is carried out such that certain orientations pass preferentially through the barrier, generally as a result of growth-velocity anisotropy. The result is a film of a specific predetermined crystallographic orientation, a range of orientations or a set of discrete orientations. 7 figs.

Strong Surface Diffusion Mediated Glancing-Angle Deposition: Growth, Recrystallization and Reorientation of Tin Nanorods

NASA Astrophysics Data System (ADS)

Wang, Huan-Hua; Shi, Yi-Jian; William, Chu; Yigal, Blum

2008-01-01

Different from usual glancing-angle deposition where low surface diffusion is necessary to form nanorods, strong surface diffusion mediated glancing-angle deposition is exemplified by growing tin nanorod films on both silicon and glass substrates simultaneously via thermal evaporation. During growth, the nanorods were simultaneously baked by the high-temperature evaporator, and therefore re-crystallized into single crystals in consequence of strong surface diffusion. The monocrystalline tin nanorods have a preferred orientation perpendicular to the substrate surface, which is quite different from the usual uniformly oblique nanorods without recrystallization.

Role of the Double-Layer Cation on the Potential-Dependent Stretching Frequencies and Binding Geometries of Carbon Monoxide at Platinum-Nonaqueous Interfaces

DTIC Science & Technology

1992-02-01

were recrystallized twice from water, or water, and then ethanol , and methanol/water, respectively, and dried at 100"C under vacuum for 24 hours. The...hexafluorophosphate, and recrystallized twice from absolute ethanol . The alkali perchlorates (LiCIO4, NaCl0 4, KCIO 4, from G.F. Smith) were recrystallized twice from...which a Ag/AgCl (3M KCI) reference electrode was used. All measurements were made at room 5 temperature , 23 ± VC. RESULTS In our earlier preliminary

Optically induced melting of colloidal crystals and their recrystallization.

PubMed

Harada, Masashi; Ishii, Masahiko; Nakamura, Hiroshi

2007-04-15

Colloidal crystals melt by applying focused light of optical tweezers and recrystallize after removing it. The disturbed zone by the light grows radially from the focus point and the ordering starts from the interface with the crystal. Although the larger disturbed zone is observed for the higher power optical tweezers, a master curve is extracted by normalization of the disturbed zone. The temporal changes of the normalized disturbed zone are well described with exponential functions, indicating that the melting and recrystallization process is governed by a simple relaxation mechanism.

Annealing effects in plated-wire memory elements. II - Recrystallization in Permalloy films.

NASA Technical Reports Server (NTRS)

Marquardt, S. J.; Kench, J. R.

1971-01-01

Results of grain-size measurements in Permalloy platings suggest that recrystallization is possible at temperatures as low as 200 C, but that it is an extremely heterogeneous process. No worthwhile correlation was found to exist between observed grain size and magnetic dispersion in samples aged in the temperature range from 180 to 230 C. It is suggested that the magnetic aging which occurs under these conditions may be due to some other diffusion-controlled process than recrystallization; a process such as chemical homogenization is tentatively preferred.

Unified Static and Dynamic Recrystallization Model for the Minerals of Earth's Mantle Using Internal State Variable Model

NASA Astrophysics Data System (ADS)

Cho, H. E.; Horstemeyer, M. F.; Baumgardner, J. R.

2017-12-01

In this study, we present an internal state variable (ISV) constitutive model developed to model static and dynamic recrystallization and grain size progression in a unified manner. This method accurately captures temperature, pressure and strain rate effect on the recrystallization and grain size. Because this ISV approach treats dislocation density, volume fraction of recrystallization and grain size as internal variables, this model can simultaneously track their history during the deformation with unprecedented realism. Based on this deformation history, this method can capture realistic mechanical properties such as stress-strain behavior in the relationship of microstructure-mechanical property. Also, both the transient grain size during the deformation and the steady-state grain size of dynamic recrystallization can be predicted from the history variable of recrystallization volume fraction. Furthermore, because this model has a capability to simultaneously handle plasticity and creep behaviors (unified creep-plasticity), the mechanisms (static recovery (or diffusion creep), dynamic recovery (or dislocation creep) and hardening) related to dislocation dynamics can also be captured. To model these comprehensive mechanical behaviors, the mathematical formulation of this model includes elasticity to evaluate yield stress, work hardening in treating plasticity, creep, as well as the unified recrystallization and grain size progression. Because pressure sensitivity is especially important for the mantle minerals, we developed a yield function combining Drucker-Prager shear failure and von Mises yield surfaces to model the pressure dependent yield stress, while using pressure dependent work hardening and creep terms. Using these formulations, we calibrated against experimental data of the minerals acquired from the literature. Additionally, we also calibrated experimental data for metals to show the general applicability of our model. Understanding of realistic mantle dynamics can only be acquired once the various deformation regimes and mechanisms are comprehensively modeled. The results of this study demonstrate that this ISV model is a good modeling candidate to help reveal the realistic dynamics of the Earth's mantle.

Crystalline rocks of the Strawberry Lake area, Front Range, Colorado

USGS Publications Warehouse

Young, Edward J.

1991-01-01

This report is a petrographic and geochemical study of the bedrock and a petrologic discussion based on felsic-mafic and silica-saturation ratios of the Strawberry Lake area. This volume is published as chapters A and B. These chapters are not available separatelyThe Strawberry lake area lies between the Continental Divide and Granby, Colorado, just north of Tabernash. It is underlain by Proterozoic rocks composed of biotite gneiss and two plutons-Boulder Creek Granodiorite of the Routt Plutonic Suite and Silver Plume Granite of the Berthoud Plutonic Suite. Relict enclaves of biotite gneiss are not uncommon in the Boulder Creek Granodiorite, in the Silver Plume Granite, and in the granitic enclaves in the biotite gneiss. Granitic and mafic enclaves in the Boulder Creek Granodiorite, granitic enclaves in the Silver Plume Granite and in the biotite gneiss, and a Tertiary andesite porphyry dike complete the rock types.

Isotopic studies of the late Archean plutonic rocks of the Wind River Range, Wyoming.

USGS Publications Warehouse

Stuckless, J.S.; Hedge, C.E.; Worl, R.G.; Simmons, K.R.; Nkomo, I.T.; Wenner, D.B.

1985-01-01

Two late Archaean intrusive events were documented in the Wind River Range by isotopic studies of the Rb-Sr and U-Th-Pb systems in whole-rock samples and the U-Pb systematics for zircon. An age of approx 2630(20) m.y. for the Louis Lake batholith and apparent ages of 2504(40) to 2575(50) m.y. for the Bear Ears pluton were obtained. Post-magmatic hydrothermal events approximately Tertiary in age, lowered delta 18O values and disturbed parent-daughter relationships in most of the isotopic systems investigated. The two intrusive units apparently were derived from different protoliths. Initial isotopic ratios and petrochemistry for the Louis Lake batholith are consistent with an early Archaean trondhjemitic to tonalitic source. The protolith for the Bear Ears pluton must have been subjected to high-grade metamorphism that caused loss of Rb and U prior to magma generation. -L.C.H.

Distribution and characteristics of metamorphic belts in the south- eastern Alaska part of the North American Cordillera

USGS Publications Warehouse

Brew, D.A.; Himmelberg, G.R.; Loney, R.A.; Ford, A.B.

1992-01-01

The Cordilleran orogen in south-eastern Alaska includes 14 distinct metamorphic belts that make up three major metamorphic complexes, from east to west: the Coast plutonic-metamorphic complex; the Glacier Bay-Chichagof plutonic-metamorphic complex; and the Chugach plutonic-metamorphic complex. Each of these complexes is related to a major subduction event. The metamorphic history of the Coast complex is lengthy and is related to the Late Cretaceous collision of the Alexander and Wrangellia terranes and the Gravina overlap assemblage to the west against the Stikine terrane to the east. The metamorphic history of the Glacier Bay-Chichagof complex is relatively simple and is related to the roots of a Late Jurassic to late Early Cretaceous island arc. The metamorphic history of the Chugach is complicated and developed during and after the Late Cretaceous collision of the Chugach terrane with the Wrangellia and Alexander terranes. -from Authors

River Valley pluton, Ontario - A late-Archean/early-Proterozoic anorthositic intrusion in the Grenville Province

NASA Technical Reports Server (NTRS)

Ashwal, Lewis D.; Wooden, Joseph L.

1989-01-01

This paper presents Nd, Sr, and Pb isotopic data indicating a late-Archean/early-Proterozoic age for the River Valley anorthositic pluton of the southwestern Grenville Province of Sudbury, Ontario. Pb-Pb isotopic data on 10 whole-rock samples ranging in composition from anorthosite to gabbro yield an age of 2560 + or - 155 Ma. The River Valley pluton is thus the oldest anorthositic intrusive yet recognized within the Grenville Province. The Sm-Nd isotopic system records an age of 2377 + or - 68 Ma. High Pb-208/Pb-204 of deformed samples relative to igneous-textured rocks implies Th introduction and/or U loss during metamorphism in the River Valley area. Rb-Sr data from igneous-textured and deformed samples and from mineral separates give an age of 2185 + or - 105 Ma, indicating substantial disturbance of the Rb-Sr isotopic system.

A simple tectonic model for crustal accretion in the Slave Province: A 2.7-2.5 Ga granite greenstone terrane

NASA Technical Reports Server (NTRS)

Hoffman, P. F.

1986-01-01

A prograding (direction unspecified) trench-arc system is favored as a simple yet comprehensive model for crustal generation in a 250,000 sq km granite-greenstone terrain. The model accounts for the evolutionary sequence of volcanism, sedimentation, deformation, metamorphism and plutonism, observed througout the Slave province. Both unconformable (trench inner slope) and subconformable (trench outer slope) relations between the volcanics and overlying turbidities; and the existence of relatively minor amounts of pre-greenstone basement (microcontinents) and syn-greenstone plutons (accreted arc roots) are explained. Predictions include: a varaiable gap between greenstone volcanism and trench turbidite sedimentation (accompanied by minor volcanism) and systematic regional variations in age span of volcanism and plutonism. Implications of the model will be illustrated with reference to a 1:1 million scale geological map of the Slave Province (and its bounding 1.0 Ga orogens).

Geology of the Petersburg batholith, eastern Piedmont, Virginia

USGS Publications Warehouse

Owens, Brent E.; Carter, Mark W.; Bailey, Christopher M.

2017-01-01

The 295-300 Ma Petersburg batholith in east-central Virginia forms one of the largest and northernmost of the Alleghanian plutonic complexes in the southern Appalachian Piedmont. The batholith is primarily composed of granite including massive and foliated (both magmatic and solid-state fabrics) varieties. The plutonic complex intruded medium-grade metamorphosed volcanic/plutonic rocks of the Roanoke Rapids terrane. The western edge of the batholith experienced right lateral transpressional deformation associated with movement on the Hylas fault zone during the Alleghanian orogeny; this was followed by normal faulting and exhumation during the development of the Triassic Richmond basin. Much of the batholith was buried by a thin veneer of primarily Cenozoic siliciclastic sediments at the western edge of the Atlantic Coastal Plain. Granite rocks of the Petersburg batholith have long been quarried for both dimension and crushed stone. The purpose of this trip is to discuss the age, origin, and tectonic significance of the Petersburg batholith.

Precious metals associated with Late Cretaceous-early Tertiary igneous rocks of southwestern Alaska

USGS Publications Warehouse

Bundtzen, Thomas K.; Miller, Marti L.; Goldfarb, Richard J.; Miller, Lance D.

1997-01-01

Placer gold and precious metal-bearing lode deposits of southwestern Alaska lie within a region 550 by 350 km, herein referred to as the Kuskokwim mineral belt. This mineral belt has yielded 100,240 kg (3.22 Moz) of gold, 12, 813 kg (412,000 oz) of silver, 1,377,412 kg (39,960 flasks) of mercury, and modest amounts of antimony and tungsten derived primarily from the late Cretaceous-early Tertiary igneous complexes of four major types: (1) alkali-calcic, comagmatic volcanic-plutonic complexes and isolated plutons, (2) calc-alkaline, meta-aluminous reduced plutons, (3) peraluminous alaskite or granite-porphyry sills and dike swarms, and (4) andesite-rhyolite subaerial volcanic rocks.About 80 percent of the 77 to 52 Ma intrusive and volcanic rocks intrude or overlie the middle to Upper Cretaceous Kuskokwim Group sedimentary and volcanic rocks, as well as the Paleozoic-Mesozoic rocks of the Nixon Fork, Innoko, Goodnews, and Ruby preaccretionary terranes.The major precious metal-bearing deposit types related to Late Cretaceous-early Tertiary igneous complexes of the Kuskokwim mineral belt are subdivided as follows: (1) plutonic-hosted copper-gold polymetallic stockwork, skarn, and vein deposits, (2) peraluminous granite-porphory-hosted gold polymetallic deposits, (3) plutonic-related, boron-enriched silver-tin polymetallic breccia pipes and replacement deposits, (4) gold and silver mineralization in epithermal systems, and (5) gold polymetallic heavy mineral placer deposits. Ten deposits genetically related to Late Cretaceous-early Tertiary intrusions contain minimum, inferred reserves amounting to 162,572 kg (5.23 Moz) of gold, 201,015 kg (6.46 Moz) silver, 12,160 metric tons (t) of tin, and 28,088 t of copper.The lodes occur in veins, stockworks, breccia pipes, and replacement deposits that formed in epithermal to mesothermal temperature-pressure conditions. Fluid inclusion, isotopic age, mineral assemblage, alteration assemblage, and structural data indicate that many of the mineral deposits associated with Late Cretaceous-early tertiary volcanic and plutonic rocks represent geologically and spatially related, vertically zoned hydrothermal systems now exposed at several erosional levels.Polymetallic gold deposits of the Kuskokwim mineral belt are probably related to 77 to 52 Ma plutonism and volcanism associated with a period of rapid, north-directed subduction of the Kula plate. The geologic interpretation suggests that igneous complexes of the Kuskokwim mineral belt formed in an intracontinental back-arc setting during a period of extensional, wrench fault tectonics.The Kuskokwim mineral belt has many geologic and metallogenic features similar to other precious metal-bearing systems associated with arc-related igneous rocks such as the Late Cretaceous-early Tertiary Rocky Mountain alkalic province, the Jurassic Mount Milligan district of central British Columbia, the Andean orogen of South America, and the Okhotsk-Chukotka belt of northeast Asia.

U-Pb ages and geochemistry of zircon from Proterozoic plutons of the Sawatch and Mosquito ranges, Colorado, U.S.A.: Implications for crustal growth of the central Colorado province

USGS Publications Warehouse

Moscati, Richard J.; Premo, Wayne R.; Dewitt, Ed; Wooden, Joseph L.

2017-01-01

A broad study of zircons from plutonic rocks of the Sawatch and Mosquito ranges of west-central Colorado (U.S.A.) was undertaken to significantly refine the magmatic chronology and chemistry of this under-studied region of the Colorado province. This region was chosen because it lies just to the north of the suspected arc-related Gunnison-Salida volcano-plutonic terrane, which has been the subject of many recent investigations—and whose origin is still debated. Our new results provide important insights into the processes active during Proterozoic crustal evolution in this region, and they have important ramifications for broader-scope crustal evolution models for southwestern North America.Twenty-four new U-Pb ages and sequentially acquired rare-earth element (REE), U, Th, and Hf contents of zircon have been determined using the sensitive high-resolution ion microprobe-reverse geometry (SHRIMP-RG). These zircon geochemistry data, in conjunction with whole-rock major- and trace-element data, provide important insights into zircon crystallization and melt fractionation, and they help to further constrain the tectonic environment of magma generation.Our detailed zircon and whole-rock data support the following three interpretations:(1) The Roosevelt Granite in the southern Sawatch Range was the oldest rock dated at 1,766 ± 7 Ma, and it intruded various metavolcanic and metasedimentary rocks. Geochemistry of both whole-rock and zircon supports the contention that this granite was produced in a magmatic arc environment and, therefore, is likely an extension of the older Dubois Greenstone Belt of the Gunnison Igneous Complex (GIC) and the Needle Mountains (1,770–1,755 Ma). Rocks of the younger Cochetopa succession of the GIC, the Salida Greenstone Belt, and the Sangre de Cristo Mountains (1,740–1,725 Ma) were not found in the Sawatch and Mosquito ranges. This observation strongly suggests that the northern edge of the Gunnison-Salida arc terrane underlies the southern portion of the Sawatch and Mosquito ranges.(2) Calc-alkalic to alkali-calcic magmas intruded this region approximately 55 m.y. after the Roosevelt Granite with emplacement of pre-deformational plutons at ca. 1,710 Ma (e.g., Henry Mountain Granite and diorite of Denny Creek), and this continued for at least 30 m.y., ending with emplacement of post-deformational plutons at ca. 1,680 Ma (e.g., Kroenke Granodiorite, granite of Fairview Peak, and syenite of Mount Yale). The timing of deformation can be constrained to sometime after intrusion of the diorite of Denny Creek and likely before the emplacement of the undeformed granite of Fairview Peak. Geochemistry of both whole-rock and zircon indicates that the older group of ca. 1,710-Ma plutons formed at shallower depths, and then they intruded the younger group of more deeply generated, commonly peraluminous and sodic plutons. Although absent in the Sawatch and Mosquito ranges, Mazatzal-age (ca. 1,680–1,620 Ma) plutonic rocks are present regionally. Inherited zircon components of Mazatzal-age were found as cores in some 1.4-Ga Sawatch and Mosquito Range zircons, indicating the likelihood of a relatively local source. These combined data suggest the possibility that all were produced within a continental-margin magmatic arc created as a result of southward-migrating (slab rollback?), north-dipping subduction to the south of the region.(3) Widespread Mesoproterozoic plutonism—with emplacement at various depths and exhibiting bimodal geochemistry—is recognized in 16 different samples. An older group of predominantly peraluminous, yet magnesian granitoids (e.g., granodiorite of Sayers, granite of Taylor River, and the St. Kevin Granite) were emplaced between ca. 1,450 and 1,425 Ma. These geochemical parameters suggest moderate degrees of partial melting in a low-pressure environment. Three younger metaluminous, but ferroan plutons (diorite of Grottos, diorite of Mount Elbert, and granodiorite of Mount Harvard), probably represent a final magmatic pulse at ca. 1,416 Ma.A comprehensive treatment of zircon REE and whole-rock trace-element behavior from Proterozoic rocks is scarce. Discriminant U/Yb versus Y diagrams using zircon data show that the Sawatch and Mosquito plutons are of continental origin, not oceanic. Additional bivariate diagrams incorporating cation ratio combinations of Gd, Ce, Yb, U, Th, Hf, and Eu offer refined insight into differences in fractionation trends and depth of magma generation for the various plutons. These interpretations, on the basis of zircon trace-element data, are mirrored in the whole-rock geochemistry data.

Effects of Static Recrystallization and Precipitation on Mechanical Properties of 00Cr12 Ferritic Stainless Steel

NASA Astrophysics Data System (ADS)

Shao, Yi; Liu, Chenxi; Yue, Tengxiao; Liu, Yongchang; Yan, Zesheng; Li, Huijun

2018-05-01

The 00Cr12 ferritic stainless steel samples were isothermally held at different temperatures in the range of 700 °C to 1000 °C to investigate the effect of static recrystallization and precipitation on mechanical properties, such as microhardness, tensile strength, and yield strength. The results show that the formation of the fine recrystallized grain, as well as precipitation, coarsening, and dissolution of the second-phase particles, influences the mechanical properties remarkably. The fine recrystallized grain can provide a positive grain boundary-strengthening effect in the sample under a relatively high holding temperature. Coarsening and dissolution of M23C6 result in partial depletion of precipitate hardening. In contrast, the size and number density of MX particles are almost constant, regardless of the holding temperature; therefore, it can provide a better precipitation-hardening effect.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deibler, Lisa Anne; Brown, Arthur; Puskar, Joseph D.

Drawn 304L stainless steel tubing was subjected to 42 different annealing heat treatments with the goal of initializing a microstructural model to select a heat treatment to soften the tubing from a hardness of 305 Knoop to 225–275 Knoop. The amount of recrystallization and grain size caused by 18 heat treatments were analyzed via optical microscopy and image analysis, revealing the full range of recrystallization from 0 to 100%. The formation of carbides during the longer duration and higher-temperature heat treatments was monitored via transmission electron microscope evaluation. The experimental results informed a model which includes recovery, recrystallization, and grainmore » growth to predict microstructure and hardness. After initialization of the model, it was able to predict hardness with a R 2 value of 0.95 and recrystallization with an R 2 value of 0.99. As a result, the model was then utilized in the design and testing of a heat treatment to soften the tubing.« less

On a Fast and Accurate In Situ Measuring Strategy for Recrystallization Kinetics and Its Application to an Al-Fe-Si Alloy

NASA Astrophysics Data System (ADS)

Kühbach, Markus; Brüggemann, Thiemo; Molodov, Konstantin D.; Gottstein, Günter

2015-03-01

In the current study, we detail a novel in situ X-ray diffraction-based bulk measurement technique, which allows for the continuous tracking of primary recrystallization kinetics. The approach is based on measuring the diffracted intensity that is correlated with the evolution of the volume fraction of particular texture components during annealing of a sample within a texture goniometer. The method is applied in an experimental study on a cold-rolled industrial Al-Fe-Si alloy. For comparison purposes, the macrotexture and the hardness evolution were monitored ex situ along isothermal and nonisothermal annealing. These measurements were then contrasted to the in situ obtained growth kinetics of recrystallizing grains in beta-fiber deformation and cube orientation. The results showed clearly that this method can be reliably utilized for the characterization of recrystallization kinetics in an industrial context.

Deformation-Induced Dynamic Precipitation and Resulting Microstructure in a Mg-Zn-Ca Alloy

NASA Astrophysics Data System (ADS)

Du, Yuzhou; Zheng, Mingyi; Jiang, Bailing; Zhou, Kesong

2018-05-01

The microstructure of an Mg-Zn-Ca extrusion was investigated by transmission electron microscopy, and the interaction between dynamic precipitation and dynamic recrystallization was analyzed. The results showed that dynamic precipitation significantly affected the microstructure of the as-extruded Mg-Zn-Ca alloy. The pinning effects of precipitates on dislocations effectively prohibited dynamic recrystallization processes, while the grain boundary precipitate Ca2Mg6Zn3, inhibited the growth of dynamically recrystallized grains. Consequently, a bimodal microstructure with fine dynamically recrystallized (DRXed) grains and elongated deformed regions was obtained for the Mg-Zn-Ca extrusion. High-resolution transmission electron microscopy indicated that the intragranular precipitate MgZn2 had a crystal orientation relationship with α-Mg in the form of (0002)Mg//(10-13)MgZn2 and [1-100]Mg//[1-210]MgZn2, which was beneficial for strength improvement.

A comparative study on the direct deposition of μc-Si:H and plasma-induced recrystallization of a-Si:H: Insight into Si crystallization in a high-density plasma

NASA Astrophysics Data System (ADS)

Zhou, H. P.; Xu, M.; Xu, S.; Feng, Y. Y.; Xu, L. X.; Wei, D. Y.; Xiao, S. Q.

2018-03-01

Deep insight into the crystallization mechanism of amorphous silicon is of theoretical and technological significance for the preparation of high-quality microcrystalline/polycrystalline silicon. In this work, we intensively compare the present two plasma-involved routes, i.e., the direct deposition and recrystallization of precursor amorphous silicon (a-Si) films, to fabricate microcrystalline silicon. Both the directly deposited and recrystallized samples show multi-layered structures as revealed by electronic microscopy. High-density hydrogen plasma involved recrystallization process, which is mediated by the hydrogen diffusion into the deep region of the precursor a-Si film, displays significantly different nucleation configuration, interface properties, and crystallite shape. The underlying mechanisms are analyzed in combination with the interplay of high-density plasma and growing or treated surface.

FEM study of recrystallized tungsten under ELM-like heat loads

NASA Astrophysics Data System (ADS)

Du, J.; Yuan, Y.; Wirtz, M.; Linke, J.; Liu, W.; Greuner, H.

2015-08-01

FEM thermal analysis has been performed on rolled tungsten plate loaded with heat load of 23 MW/m2 for 1.5 s. Gradient temperature field is generated due to the Gaussian shape beam profile. Recrystallization and grain growth of various scales were found at different areas of the sample depending on the localized thermal field. FEM thermal-mechanical analyses have been performed on the recrystallized tungsten exposed to ELMs-like heat loads. The analyzed load conditions were 0.38 and 1.14 GW/m2 with different base temperatures. Material deterioration due to recrystallization was implemented by adopting decreased yield stress, tangent modulus, strength coefficient and ductility coefficients. Life time predicted by adopting strain life criterion indicates grain growth from 5 μm to 100 μm causes the life decrease of 80%. This result is gained by pure mathematical calculation based on the empiric assumptions of material properties.

Recrystallization of freezable bound water in aqueous solutions of medium concentration

NASA Astrophysics Data System (ADS)

Lishan, Zhao; Liqing, Pan; Ailing, Ji; Zexian, Cao; Qiang, Wang

2016-07-01

For aqueous solutions with freezable bound water, vitrification and recrystallization are mingled, which brings difficulty to application and misleads the interpretation of relevant experiments. Here, we report a quantification scheme for the freezable bound water based on the water-content dependence of glass transition temperature, by which also the concentration range for the solutions that may undergo recrystallization finds a clear definition. Furthermore, we find that depending on the amount of the freezable bound water, different temperature protocols should be devised to achieve a complete recrystallization. Our results may be helpful for understanding the dynamics of supercooled aqueous solutions and for improving their manipulation in various industries. Project supported by the Knowledge Innovation Project of Chinese Academy of Sciences on Water Science Research (Grant No. KJZD-EW-M03) and the National Natural Science Foundation of China (Grant Nos. 11474325 and 11290161).

Surface premelting/recrystallization governing the collapse of open-cell nanoporous Cu via thermal annealing.

PubMed

Wang, L; Zhang, X M; Deng, L; Tang, J F; Xiao, S F; Deng, H Q; Hu, W Y

2018-06-04

We systematically investigate the collapse of a set of open-cell nanoporous Cu (np-Cu) materials with the same porosity and shape but different specific surface areas, during thermal annealing, by performing large-scale molecular dynamics simulations. Two mechanisms govern the collapse of np-Cu. One is direct surface premelting, facilitating the collapse of np-Cu, when the specific surface area is less than a critical value (∼2.38 nm-1). The other is recrystallization followed by surface premelting, accelerating the sloughing of ligaments and the annihilation of voids, when the critical specific surface area is exceeded. Surface premelting results from surface reconstruction by prompting localized "disordering" and "chaos" on the surface, and the melting temperature reduces linearly with the increase of the specific surface area. Recrystallization is followed by surface premelting as the melting temperature is below the supercooling point, where a liquid is unstable and instantaneously recrystallizes.

Thermoplastic polyimide NEW-TPI (trademark)

NASA Technical Reports Server (NTRS)

Hou, Tan-Hung; Reddy, Rakasi M.

1990-01-01

Thermal and rheological properties of a commercial thermoplastic polyimide, NEW-TPI (trademark), were characterized. The as-received material possesses initially a transient crystallite form with a bimodal distribution in peak melting temperatures. After the melting of the initial crystallite structure, the sample can be recrystallized by various thermal treatments. A bimodal or single modal melting peak distribution is formed for annealing temperatures below or above 360 C, respectively. The recrystallized crystallinities are all transient in nature. The polymers are unable to be recrystallized after being subjected to elevated temperature annealing above 450 C. The recrystallization mechanism was postulated, and a simple kinetics model was found to describe the behavior rather satisfactory under the conditions of prolonged thermal annealing. Rheological measurements made in the linear viscoelastic range support the evidence observed in the thermal analysis. Furthermore, the measurements sustain the manufacturer's recommended processing window of 400 to 420 C for this material.

Disclination mediated dynamic recrystallization in metals at low temperature.

PubMed

Aramfard, Mohammad; Deng, Chuang

2015-09-16

Recrystallization is one of the most important physical phenomena in condensed matter that has been utilized for materials processing for thousands of years in human history. It is generally believed that recrystallization is thermally activated and a minimum temperature must be achieved for the necessary atomic mechanisms to occur. Here, using atomistic simulations, we report a new mechanism of dynamic recrystallization that can operate at temperature as low as T = 10 K in metals during deformation. In contrast to previously proposed dislocation-based models, this mechanism relies on the generation of disclination quadrupoles, which are special defects that form during deformation when the grain boundary migration is restricted by structural defects such as triple junctions, cracks or obstacles. This mechanism offers an alternative explanation for the grain refinement in metals during severe plastic deformation at cryogenic temperature and may suggest a new method to tailor the microstructure in general crystalline materials.

A study of the oxide dispersion and recrystallization in NiCrAl prepared from preoxidized powder

NASA Technical Reports Server (NTRS)

Glasgow, T. K.

1975-01-01

The SAP technique of dispersion strengthening (formation of an oxide dispersion by preoxidation of metal powders) was applied to atomized powder of the alloy Ni-17Cr-5Al-0.2 Y. SAP-NiCrAl was worked by extrusion and rod rolling at 1205 C and by swaging at 760 C. A variety of annealing treatments were applied after working to determine the recrystallization response. NiCrAlY, similarly prepared from atomized powder, but without a preoxidation treatment, was examined for comparison. The SAP-NiCrAl of this study exhibited oxide particle size and spacing much larger than that usually observed in oxide dispersion strengthened alloys; nonetheless, it was possible to achieve abnormal (secondary) recrystallization in the SAP-NiCrAl as has been reported for other oxide dispersion strengthened alloys. In contrast, unoxidized NiCrAlY exhibited only primary recrystallization.

Recrystallization-induced self-assembly for the growth of Cu₂O superstructures.

PubMed

Shang, Yang; Shao, Yi-Ming; Zhang, Dong-Feng; Guo, Lin

2014-10-20

The assembly of inorganic nanoparticles (NPs) into 3D superstructures with defined morphologies is of particular interest. A novel strategy that is based on recrystallization-induced self-assembly (RISA) for the construction of 3D Cu2O superstructures and employs Cu2O mesoporous spheres with diameters of approximately 300 nm as the building blocks has now been developed. Balancing the hydrolysis and recrystallization rates of the CuCl precursors through precisely adjusting the experimental parameters was key to success. Furthermore, the geometry of the superstructures can be tuned to obtain either cubes or tetrahedra and was shown to be dependent on the growth behavior of bulk CuCl. The overall strategy extends the applicability of recrystallization-based processes for the guided construction of assemblies and offers unique insights for assembling larger particles into complicated 3D superstructures. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Copper Refinement from Anode to Cathode and then to Wire Rod: Effects of Impurities on Recrystallization Kinetics and Wire Ductility.

PubMed

Helbert, Anne-Laure; Moya, Alice; Jil, Tomas; Andrieux, Michel; Ignat, Michel; Brisset, François; Baudin, Thierry

2015-10-01

In this paper, the traceability of copper from the anode to the cathode and then the wire rod has been studied in terms of impurity content, microstructure, texture, recrystallization kinetics, and ductility. These characterizations were obtained based on secondary ion mass spectrometry, differential scanning calorimetry (DSC), X-ray diffraction, HV hardness, and electron backscattered diffraction. It is shown that the recrystallization was delayed by the total amount of impurities. From tensile tests performed on cold drawn and subsequently annealed wires for a given time, a simplified model has been developed to link tensile elongation to the chemical composition. This model allowed quantification of the contribution of some additional elements, present in small quantity, on the recrystallization kinetics. The proposed model adjusted for the cold-drawn wires was also validated on both the cathode and wire rod used for the study of traceability.

Disclination mediated dynamic recrystallization in metals at low temperature

PubMed Central

Aramfard, Mohammad; Deng, Chuang

2015-01-01

Recrystallization is one of the most important physical phenomena in condensed matter that has been utilized for materials processing for thousands of years in human history. It is generally believed that recrystallization is thermally activated and a minimum temperature must be achieved for the necessary atomic mechanisms to occur. Here, using atomistic simulations, we report a new mechanism of dynamic recrystallization that can operate at temperature as low as T = 10 K in metals during deformation. In contrast to previously proposed dislocation-based models, this mechanism relies on the generation of disclination quadrupoles, which are special defects that form during deformation when the grain boundary migration is restricted by structural defects such as triple junctions, cracks or obstacles. This mechanism offers an alternative explanation for the grain refinement in metals during severe plastic deformation at cryogenic temperature and may suggest a new method to tailor the microstructure in general crystalline materials. PMID:26374603

A method for the monitoring of metal recrystallization based on the in-situ measurement of the elastic energy release using neutron diffraction.

PubMed

Christien, F; Telling, M T F; Knight, K S; Le Gall, R

2015-05-01

A method is proposed for the monitoring of metal recrystallization using neutron diffraction that is based on the measurement of stored energy. Experiments were performed using deformed metal specimens heated in-situ while mounted at the sample position of the High Resolution Powder Diffractometer, HRPD (ISIS Facility), UK. Monitoring the breadth of the resulting Bragg lines during heating not only allows the time-dependence (or temperature-dependence) of the stored energy to be determined but also the recrystallized fraction. The analysis method presented here was developed using pure nickel (Ni270) specimens with different deformation levels from 0.29 to 0.94. In situ temperature ramping as well as isothermal annealing was undertaken. The method developed in this work allows accurate and quantitative monitoring of the recrystallization process. The results from neutron diffraction are satisfactorily compared to data obtained from calorimetry and hardness measurements.

Geochemistry of zircons from basic rocks of the Korosten anorthosite-mangerite-charnockite-granite complex, north-western region of the Ukrainian Shield

NASA Astrophysics Data System (ADS)

Shumlyanskyy, Leonid; Belousova, Elena; Petrenko, Oksana

2017-09-01

The concentrations of 26 trace elements have been determined by laser ablation ICP-MS in zircons from four samples of basic rocks of the Korosten anorthosite-mangerite-charnockite-granite plutonic complex, the Ukrainian Shield. Zircons from the Fedorivka and Torchyn gabbroic intrusions and Volynsky anorthosite massif have distinctive abundances of many trace elements (REE, Sr, Y, Mn, Th). Zircons from the gabbroic massifs are unusually enriched in trace elements, while zircons from pegmatites in anorthosite are relatively depleted in trace elements. High concentrations of trace elements in zircons from gabbroic intrusions can be explained by their crystallization from residual interstitial melts enriched in incompatible elements. The zircons studied demonstrate a wide range of Ti concentrations, which reflects their temperature of crystallization: the zircons most enriched in Ti, from mafic pegmatites of the Horbuliv quarry (20-40 ppm), have the highest temperature of crystallization (845 ± 40 °C). Lower (720-770 °C) temperatures of zircon crystallization in gabbroic rocks are explained by its crystallization from the latest portions of the interstitial melt or by simultaneous crystallization of ilmenite. The Ce anomaly in zircons correlates with the degree of oxidation of the coexisting ilmenite.

Dynamic recrystallization behavior of an as-cast TiAl alloy during hot compression

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Jianbo, E-mail: lijianbo1205@163.com; Liu, Yong, E-mail: yonliu@csu.edu.cn; Wang, Yan, E-mail: wangyan@csu.edu.cn

2014-11-15

High temperature compressive deformation behaviors of as-cast Ti–43Al–4Nb–1.4W–0.6B alloy were investigated at temperatures ranging from 1050 °C to 1200 °C, and strain rates from 0.001 s{sup −1} to 1 s{sup −1}. Electron back scattered diffraction technique, scanning electron microscopy and transmission electron microscopy were employed to investigate the microstructural evolutions and nucleation mechanisms of the dynamic recrystallization. The results indicated that the true stress–true strain curves show a dynamic flow softening behavior. The dependence of the peak stress on the deformation temperature and the strain rate can well be expressed by a hyperbolic-sine type equation. The activation energy decreases withmore » increasing the strain. The size of the dynamically recrystallized β grains decreases with increasing the value of the Zener–Hollomon parameter (Z). When the flow stress reaches a steady state, the size of β grains almost remains constant with increasing the deformation strain. The continuous dynamic recrystallization plays a dominant role in the deformation. In order to characterize the evolution of dynamic recrystallization volume fraction, the dynamic recrystallization kinetics was studied by Avrami-type equation. Besides, the role of β phase and the softening mechanism during the hot deformation was also discussed in details. - Highlights: • The size of DRXed β grains decreases with increasing the value of the Z. • The CDRX plays a dominant role in the deformation. • The broken TiB{sub 2} particles can promote the nucleation of DRX.« less

Microstructure and yield strength effects on hydrogen and tritium induced cracking in HERF (high-energy-rate-forged) stainless steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morgan, M J; Tosten, M H

1989-01-01

Rising-load J-integral measurements and falling-load threshold stress intensity measurements were used to characterize hydrogen and tritium induced cracking in high-energy-rate-forged (HERF) 21-6-9 stainless steel. Samples having yield strengths in the range 517--930 MPa were thermally charged with either hydrogen or tritium and tested at room temperature in either air or high-pressure hydrogen gas. In general, the hydrogen isotopes reduced the fracture toughness by affecting the fracture process. Static recrystallization in the HERF microstructures affected the material's fracture toughness and its relative susceptibility to hydrogen and tritium induced fracture. In hydrogen-exposed samples, the reduction in fracture toughness was primarily dependent onmore » the susceptibility of the microstructure to intergranular fracture and only secondarily affected by strength in the range of 660 to 930 MPa. Transmission-electron microscopy observations revealed that the microstructures least susceptible to hydrogen-induced intergranular cracking contained patches of fully recrystallized grains. These grains are surrounded by highly deformed regions containing a high number density of dislocations. The microstructure can best be characterized as duplex'', with soft recrystallized grains embedded in a hard, deformed matrix. The microstructures most susceptible to hydrogen-induced intergranular fracture showed no well-developed recrystallized grains. The patches of recrystallized grains seemed to act as crack barriers to hydrogen-induced intergranular fracture. In tritium-exposed-and-aged samples, the amount of static recrystallization also affected the fracture toughness properties but to a lesser degree. 7 refs., 25 figs.« less

Evolution of grain boundary character distributions in alloy 825 tubes during high temperature annealing: Is grain boundary engineering achieved through recrystallization or grain growth?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bai, Qin; Zhao, Qing

Grain boundary engineering (GBE) of nickel-based alloy 825 tubes was carried out with different cold drawing deformations by using a draw-bench on a factory production line and subsequent annealing at various temperatures. The microstructure evolution of alloy 825 during thermal-mechanical processing (TMP) was characterized by means of the electron backscatter diffraction (EBSD) technique to study the TMP effects on the grain boundary network and the evolution of grain boundary character distributions during high temperature annealing. The results showed that the proportion of ∑ 3{sup n} coincidence site lattice (CSL) boundaries of alloy 825 tubes could be increased to > 75%more » by the TMP of 5% cold drawing and subsequent annealing at 1050 °C for 10 min. The microstructures of the partially recrystallized samples and the fully recrystallized samples suggested that the proportion of low ∑ CSL grain boundaries depended on the annealing time. The frequency of low ∑ CSL grain boundaries increases rapidly with increasing annealing time associating with the formation of large-size highly-twinned grains-cluster microstructure during recrystallization. However, upon further increasing annealing time, the frequency of low ∑ CSL grain boundaries decreased markedly during grain growth. So it is concluded that grain boundary engineering is achieved through recrystallization rather than grain growth. - Highlights: •The grain boundary engineering (GBE) is applicable to 825 tubes. •GBE is achieved through recrystallization rather than grain growth. •The low ∑ CSL grain boundaries in 825 tubes can be increased to > 75%.« less

Physical stability and recrystallization kinetics of amorphous ibipinabant drug product by fourier transform raman spectroscopy.

PubMed

Sinclair, Wayne; Leane, Michael; Clarke, Graham; Dennis, Andrew; Tobyn, Mike; Timmins, Peter

2011-11-01

The solid-state physical stability and recrystallization kinetics during storage stability are described for an amorphous solid dispersed drug substance, ibipinabant, at a low concentration (1.0%, w/w) in a solid oral dosage form (tablet). The recrystallization behavior of the amorphous ibipinabant-polyvinylpyrrolidone solid dispersion in the tablet product was characterized by Fourier transform (FT) Raman spectroscopy. A partial least-square analysis used for multivariate calibration based on Raman spectra was developed and validated to detect less than 5% (w/w) of the crystalline form (equivalent to less than 0.05% of the total mass of the tablet). The method provided reliable and highly accurate predictive crystallinity assessments after exposure to a variety of stability storage conditions. It was determined that exposure to moisture had a significant impact on the crystallinity of amorphous ibipinabant. The information provided by the method has potential utility for predictive physical stability assessments. Dissolution testing demonstrated that the predicted crystallinity had a direct correlation with this physical property of the drug product. Recrystallization kinetics was measured using FT Raman spectroscopy for the solid dispersion from the tablet product stored at controlled temperature and relative humidity. The measurements were evaluated by application of the Johnson-Mehl-Avrami (JMA) kinetic model to determine recrystallization rate constants and Avrami exponent (n = 2). The analysis showed that the JMA equation could describe the process very well, and indicated that the recrystallization kinetics observed was a two-step process with an induction period (nucleation) followed by rod-like crystal growth. Copyright © 2011 Wiley-Liss, Inc.

Cracking the Stoping Paradigm: Field and Modeling Constraints From the Sierra Nevada Batholith

NASA Astrophysics Data System (ADS)

Pignotta, G. S.; Paterson, S. R.; Okaya, D.

2001-12-01

The significance of stoping during pluton emplacement remains a controversial issue. This mechanism has fallen out of favor recently largely due to the apparent lack of stoped blocks preserved in plutons. Our field studies in plutons in a variety of tectonic settings clearly show evidence of stoping. This is not surprising since stoping should be favored when large thermal gradients exist at magma-host rock boundaries. Preservation of stoped blocks is uncommon however, since the rate at which blocks sink is much greater than the rate at which magmas crystallize (Paterson and Okaya, 1999). Thus, only during final crystallization when magmatic yield strength is high, should stoped blocks be trapped. The Mitchell Peak granodiorite, Sierra Nevada is a rare example of a pluton that preserves abundant stoped blocks, with the youngest intrusive phase preserving >25% stoped blocks, and locally, near the margins >50% of exposed surface area is stoped blocks. Thus stoping is an important process here, at least during the final stages of emplacement. This area is ideal to study the mechanisms of block formation and disintegration using both field and modeling techniques, because of abundant stoped blocks, excellent exposure, and nature of host rock. The host rock is a slightly older, coarse grained, granodioritic intrusion that preserves extremely weak to no magmatic fabric, and thus can be treated as a "homogeneous and isotropic" medium for the purposes of thermal-mechanical modeling. Detailed mapping indicates that preserved stoped blocks range in size from hundreds of m's to xenocrystic feldspars, and there is abundant evidence for mechanical disintegration of blocks. Thermal-mechanical models, using detailed maps from the Mitchell Peak area, further support field observations. Rates at which thermal stresses develop and exceed host rock tensile strength are extremely rapid (hours to days) compared to onset of crystal plastic flow and/or melting. The calculated pattern of thermal stresses (i.e. high magnitudes at block corners) strongly supports rapid mechanical breakdown of stoped blocks. We suggest that rapid disintegration coupled with rapid rates of sinking of blocks explains the lack of observable blocks in plutons, and is an effective way to contaminate magmas thermally, mechanically and chemically. Furthermore, lack of observable stoped blocks in plutons should not be used as evidence that stoping did not occur.

Geologic Map of the Sheep Hole Mountains 30' x 60' Quadrangle, San Bernardino and Riverside Counties, California

USGS Publications Warehouse

Howard, Keith A.

2002-01-01

This data set describes and maps the geology of the Sheep Hole Mountains 30' x 60' quadrangle in southern California. The quadrangle covers an area of the Mojave Desert characterized by desert ranges separated by broad basins. Ranges include parts of the Old Woman, Ship, Iron, Coxcomb, Pinto, Bullion, and Calumet mountains as well as Lead Mountain and the Kilbeck Hills. Basins include part of Ward Valley, part of Cadiz Valley including Cadiz Lake playa, and broad valleys occupied by the Bristol Lake and Dale Lake playas. Bedrock geologic units in the ranges range in age from Proterozoic to Quaternary. The valleys expose Neogene and Quaternary deposits. Proterozoic granitoids in the quadrangle include the Early Proterozoic Fenner Gneiss, Kilbeck Gneiss, Dog Wash Gneiss, granite of Joshua Tree, the (highly peraluminous granite) gneiss of Dry Lakes valley, and a Middle Proterozoic granite. Proterozoic supracrustal rocks include the Pinto Gneiss of Miller (1938) and the quartzite of Pinto Mountain. Early Proterozoic orogeny left an imprint of metamorphic mineral assemblages and fabrics in the older rocks. A Cambrian to Triassic sequence deposited on the continental shelf lies above a profound nonconformity developed on the Proterozoic rocks. Small metamorphosed remnants of this sequence in the quadrangle include rocks correlated to the Tapeats, Bright Angel, Bonanza King, Redwall, Bird Spring, Hermit, Coconino, Kaibab, and Moenkopi formations. The Dale Lake Volcanics (Jurassic), and the McCoy Mountains Formation of Miller (1944)(Cretaceous and Jurassic?) are younger Mesozoic synorogenic supracrustal rocks in the quadrangle. Mesozoic intrusions form much of the bedrock in the quadrangle, and represent a succession of magmatic arcs. The oldest rock is the Early Triassic quartz monzonite of Twentynine Palms. Extensive Jurassic magmatism is represented by large expanses of granitoids that range in composition from gabbro to syenogranite. They include the Virginia May Quartz Monzonite and other members of the Bullion Intrusive Suite, the Chubbock Porphyry, and rocks that form the Goat Basin pluton, Music Valley pluton, and Ship Mountains pluton. The Jurassic plutons range in emplacement depths from mid-crustal to hypabysasal. Mafic and felsic dikes that probably are part of the Late Jurassic Independence dike swarm intrude the Jurassic batholithic rocks. A Mesozoic ductile fault (tectonic slide), the Scanlon thrust, places an inverted sequence of lower Paleozoic rocks and their Proterozoic basement over a lower plate of younger Paleozoic and Triassic rocks. The lower- plate rocks are internally sliced and folded. They in turn are superposed along an attenuation tectonic slide, the Kilbeck fault, over highly strained tectonic schist. The major tectonic slides and associated fabrics are cut by Late Cretaceous batholithic rocks. Widespread Late Cretaceous granitoids assigned to the Cadiz Valley batholith and the Old-Woman Piute Range batholith together form a contiguous super-unit of granite and granodiorite compositions. The Old- Woman Piute Range batholith includes the granite of Sweetwater Wash in the Painted Rock pluton and the Old Woman Mountains Granodiorite forming the Old Woman pluton. The large Cadiz Valley batholith is divided into the Iron Mountains Intrusive Suite and the Coxcomb Intrusive Suite. The Iron Mountains Intrusive Suite includes the Granite Pass Granite (which forms the Granite Pass pluton), the Danby Lake Granite Gneiss, and the Iron Granodiorite Gneiss. The Coxcomb Intrusive Suite consists of many units including the Clarks Pass Granodiorite, the Sheep Hole Mountains Granodiorite (forms the Sheep Hole Mountains pluton), and the Sheep Hole Pass Granite (forms the Sheep Hole Pass pluton). The Cretaceous rocks were emplaced at a range of deep to shallow depths, and their intrusion resulted in an aureole 2-3 km wide in older rocks. Mylonitic fabrics developed through a thickness of >1.3 km, together

Lead isotope compositions of Late Cretaceous and early Tertiary igneous rocks and sulfide minerals in Arizona: Implications for the sources of plutons and metals in porphyry copper deposits

USGS Publications Warehouse

Bouse, R.M.; Ruiz, J.; Titley, S.R.; Tosdal, R.M.; Wooden, J.L.

1999-01-01

Porphyry copper deposits in Arizona are genetically associated with Late Cretaceous and early Tertiary igneous complexes that consist of older intermediate volcanic rocks and younger intermediate to felsic intrusions. The igneous complexes and their associated porphyry copper deposits were emplaced into an Early Proterozoic basement characterized by different rocks, geologic histories, and isotopic compositions. Lead isotope compositions of the Proterozoic basement rocks define, from northwest to southeast, the Mojave, central Arizona, and southeastern Arizona provinces. Porphyry copper deposits are present in each Pb isotope province. Lead isotope compositions of Late Cretaceous and early Tertiary plutons, together with those of sulfide minerals in porphyry copper deposits and of Proterozoic country rocks, place important constraints on genesis of the magmatic suites and the porphyry copper deposits themselves. The range of age-corrected Pb isotope compositions of plutons in 12 Late Cretaceous and early Tertiary igneous complexes is 206Pb/204Pb = 17.34 to 22.66, 207Pb/204Pb = 15.43 to 15.96, and 208Pb/204Pb = 37.19 to 40.33. These Pb isotope compositions and calculated model Th/U are similar to those of the Proterozoic rocks in which the plutons were emplaced, thereby indicating that Pb in the younger rocks and ore deposits was inherited from the basement rocks and their sources. No Pb isotope differences distinguish Late Cretaceous and early Tertiary igneous complexes that contain large economic porphyry copper deposits from less rich or smaller deposits that have not been considered economic for mining. Lead isotope compositions of Late Cretaceous and early Tertiary plutons and sulfide minerals from 30 metallic mineral districts, furthermore, require that the southeastern Arizona Pb province be divided into two subprovinces. The northern subprovince has generally lower 206Pb/204Pb and higher model Th/U, and the southern subprovince has higher 206Pb/204Pb and lower model Th/U. These Pb isotope differences are inferred to result from differences in their respective post-1.7 Ga magmatic histories. Throughout Arizona, Pb isotope compositions of Late Cretaceous and early Tertiary plutons and associated sulfide minerals are distinct from those of Jurassic plutons and also middle Tertiary igneous rocks and sulfide minerals. These differences most likely reflect changes in tectonic setting and magmatic sources. Within Late Cretaceous and early Tertiary igneous complexes that host economic porphyry copper deposits, there is commonly a decrease in Pb isotope composition from older to younger plutons. This decrease in Pb isotope values with time suggests an increasing involvement of crust with lower U/Pb than average crust in the source(s) of Late Cretaceous and early Tertiary magmas. Lead isotope compositions of the youngest porphyries in the igneous complexes are similar to those in most sulfide minerals within the associated porphyry copper deposit. This Pb isotope similarity argues for a genetic link between them. However, not all Pb in the sulfide minerals in porphyry copper deposits is magmatically derived. Some sulfide minerals, particularly those that are late stage, or distal to the main orebody, or in Proterozoic or Paleozoic rocks, have elevated Pb isotope compositions displaced toward the gross average Pb isotope composition of the local country rocks. The more radiogenic isotopic compositions argue for a contribution of Pb from those rocks at the site of ore deposition. Combining the Pb isotope data with available geochemical, isotopic, and petrologic data suggests derivation of the young porphyry copper-related plutons, most of their Pb, and other metals from a hybridized lower continental crustal source. Because of the likely involvement of subduction-related mantle-derived basaltic magma in the hybridized lower crustal source, an indiscernible mantle contribution is probable in the porphyry magmas. Clearly, in addition

The ultimate fate of a synmagmatic shear zone. Interplay between rupturing and ductile flow in a cooling granite pluton

NASA Astrophysics Data System (ADS)

Zibra, I.; White, J. C.; Menegon, L.; Dering, G.; Gessner, K.

2018-05-01

The Neoarchean Cundimurra Pluton (Yilgarn Craton, Western Australia) was emplaced incrementally along the transpressional Cundimurra Shear Zone. During syndeformational cooling, discrete networks of cataclasites and ultramylonites developed in the narrowest segment of the shear zone, showing the same kinematics as the earlier synmagmatic structures. Lithological boundaries between aplite/pegmatite veins and host granitic gneiss show more intense pre-cataclasite fabrics than homogeneous material, and these boundaries later became the preferred sites of shear rupture and cataclasite nucleation. Transient ductile instabilities established along lithological boundaries culminated in shear rupture at relatively high temperature (∼500-600 °C). Here, tensile fractures at high angles from the fault plane formed asymmetrically on one side of the fault, indicating development during seismic rupture, establishing the oldest documented earthquake on Earth. Tourmaline veins were emplaced during brittle shearing, but fluid pressure probably played a minor role in brittle failure, as cataclasites are in places tourmaline-free. Subsequent ductile deformation localized in the rheologically weak tourmaline-rich aggregates, forming ultramylonites that deformed by grain-size sensitive creep. The shape and width of the pluton/shear zone and the regime of strain partitioning, induced by melt-present deformation and established during pluton emplacement, played a key role in controlling the local distribution of brittle and then ductile subsolidus structures.

Contrasting magmatic structures between small plutons and batholiths emplaced at shallow crustal level (Sierras de Córdoba, Argentina)

NASA Astrophysics Data System (ADS)

Pinotti, Lucio P.; D'Eramo, Fernando J.; Weinberg, Roberto F.; Demartis, Manuel; Tubía, José María; Coniglio, Jorge E.; Radice, Stefania; Maffini, M. Natalia; Aragón, Eugenio

2016-11-01

Processes like injection, magma flow and differentiation and influence of the regional strain field are here described and contrasted to shed light on their role in the formation of small plutons and large batholiths their magmatic structures. The final geometric and compositional arrangement of magma bodies are a complex record of their construction and internal flow history. Magma injection, flow and differentiation, as well as regional stresses, all control the internal nature of magma bodies. Large magma bodies emplaced at shallow crustal levels result from the intrusion of multiple magma batches that interact in a variety of ways, depending on internal and external dynamics, and where the early magmatic, growth-related structures are commonly overprinted by subsequent history. In contrast, small plutons emplaced in the brittle-ductile transition more likely preserve growth-related structures, having a relatively simple cooling history and limited internal magma flow. Outcrop-scale magmatic structures in both cases record a rich set of complementary information that can help elucidate their evolution. Large and small granitic bodies of the Sierra Pampeanas preserve excellent exposures of magmatic structures that formed as magmas stepped through different rheological states during pluton growth and solidification. These structures reveal not only the flow pattern inside magma chambers, but also the rheological evolution of magmas in response to temperature evolution.

Stress in recrystallized quartz by electron backscatter diffraction mapping

NASA Astrophysics Data System (ADS)

Llana-Fúnez, S.

2017-07-01

The long-term state of stress at middle and lower crustal depths can be estimated through the study of the microstructure of exhumed rocks from active and/or ancient shear zones. Constitutive equations for deformation mechanisms in experimentally deformed rocks relate differential stress to the size of recrystallized grains. Cross et al. (2017) take advantage of electron backscatter diffraction mapping to systematically separate new recrystallized grains from host grains on the basis of the measurable lattice distorsion within the grains. They produce the first calibrated piezometer for quartz with this technique, reproducing within error a previous calibration based on optical microscopy.

Application of two-level factorial design to investigate the effect of process parameters on the sonocrystallization of sulfathiazole

NASA Astrophysics Data System (ADS)

Kuo, Peng-Hsuan; Zhang, Bo-Cong; Su, Chie-Shaan; Liu, Jun-Jen; Sheu, Ming-Thau

2017-08-01

In this study, cooling sonocrystallization was used to recrystallize an active pharmaceutical ingredient, sulfathiazole, using methanol as the solvent. The effects of three operating parameters-sonication intensity, sonication duration, and solution concentration-on the recrystallization were investigated by using a 2k factorial design. The solid-state properties of sulfathiazole, including the mean particle size, crystal habit, and polymorphic form, were analyzed. Analysis of variance showed that the effect of the sonication intensity, cross-interaction effect of sonication intensity/sonication duration, and cross-interaction effect of sonication intensity/solution concentration on the recrystallization were significant. The results obtained using the 2k factorial design indicated that a combination of high sonication intensity and long sonication duration is not favorable for sonocrystallization, especially at a high solution concentration. A comparison of the solid-state properties of the original and the recrystallized sulfathiazole revealed that the crystal habit of the recrystallized sulfathiazole was more regular and that its mean particle size could be reduced to approximately 10 μm. Furthermore, the analytical results obtained using the PXRD, DSC, and FTIR spectroscopy indicated that the polymorphic purity of sulfathiazole improved from the original Form III/IV mixture to Form III after sonocrystallization.

Microstructure study of a severely plastically deformed Mg-Zn-Y alloy by application of low angle annular dark field diffraction contrast imaging.

PubMed

Basha, Dudekula Althaf; Rosalie, Julian M; Somekawa, Hidetoshi; Miyawaki, Takashi; Singh, Alok; Tsuchiya, Koichi

2016-01-01

Microstructural investigation of extremely strained samples, such as severely plastically deformed (SPD) materials, by using conventional transmission electron microscopy techniques is very challenging due to strong image contrast resulting from the high defect density. In this study, low angle annular dark field (LAADF) imaging mode of scanning transmission electron microscope (STEM) has been applied to study the microstructure of a Mg-3Zn-0.5Y (at%) alloy processed by high pressure torsion (HPT). LAADF imaging advantages for observation of twinning, grain fragmentation, nucleation of recrystallized grains and precipitation on second phase particles in the alloy processed by HPT are highlighted. By using STEM-LAADF imaging with a range of incident angles, various microstructural features have been imaged, such as nanoscale subgrain structure and recrystallization nucleation even from the thicker region of the highly strained matrix. It is shown that nucleation of recrystallized grains starts at a strain level of revolution [Formula: see text] (earlier than detected by conventional bright field imaging). Occurrence of recrystallization of grains by nucleating heterogeneously on quasicrystalline particles is also confirmed. Minimizing all strain effects by LAADF imaging facilitated grain size measurement of [Formula: see text] nm in fully recrystallized HPT specimen after [Formula: see text].

Study on the dynamic recrystallization model and mechanism of nuclear grade 316LN austenitic stainless steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Shenglong; Zhang, Mingxian; Wu, Huanchun

In this study, the dynamic recrystallization behaviors of a nuclear grade 316LN austenitic stainless steel were researched through hot compression experiment performed on a Gleeble-1500 simulator at temperatures of 900–1250 °C and strain rates of 0.01–1 s{sup −1}. By multiple linear regressions of the flow stress-strain data, the dynamic recrystallization mathematical models of this steel as functions of strain rate, strain and temperature were developed. Then these models were verified in a real experiment. Furthermore, the dynamic recrystallization mechanism of the steel was determined. The results indicated that the subgrains in this steel are formed through dislocations polygonization and thenmore » grow up through subgrain boundaries migration towards high density dislocation areas and subgrain coalescence mechanism. Dynamic recrystallization nucleation performs in grain boundary bulging mechanism and subgrain growth mechanism. The nuclei grow up through high angle grain boundaries migration. - Highlights: •Establish the DRX mathematical models of nuclear grade 316LN stainless steel •Determine the DRX mechanism of this steel •Subgrains are formed through dislocations polygonization. •Subgrains grow up through subgrain boundaries migration and coalescence mechanism. •DRX nucleation performs in grain boundary bulging mechanism and subgrain growth mechanism.« less

Modeling the microstructural changes during hot tandem rolling of AA5 XXX aluminum alloys: Part II. Textural evolution

NASA Astrophysics Data System (ADS)

Wells, M. A.; Samarasekera, I. V.; Brimacombe, J. K.; Hawbolt, E. B.; Lloyd, D. J.

1998-06-01

In Part II of this article, the experimental work undertaken to measure the effect of deformation parameters (temperature, strain, and strain rate) on the texture formation during hot deformation and the evolution during subsequent recrystallization is described. In addition, the isothermal kinetics of development of individual texture components were also determined. A neutron diffractometer was used to measure the texture in the as-hot-deformed aluminum samples, and the samples were then heat treated in a 400 °C salt bath for various lengths of time, with the texture being remeasured at various stages in the recrystallization process. Using data from the experimental program, the texture evolution during recrystallization was modeled by applying a modified form of the Avrami equation. Results indicated that, of the deformation parameters studied, textural development was most sensitive to the deformation temperature for both alloys. In addition, modeling results revealed that the Cu component ({112} <111>) was the first to recrystallize, typically followed by the S ({123} <634>) and Bs ({110} <112>) components. This is in agreement with earlier work which indicated that the Bs component was the hardest to recrystallize, possibly because it is able to deform on very few slip systems and, hence, the dislocation interaction may be low.

Measurement of process-dependent material properties of pharmaceutical solids by nanoindentation.

PubMed

Liao, Xiangmin; Wiedmann, Timothy Scott

2005-01-01

The purpose of this work was to evaluate nanoindentation as a means to characterize the material properties of pharmaceutical solids. X-ray diffraction of potassium chloride and acetaminophen showed that samples prepared by cooling a melt to a crystalline sample as opposed to slow recrystallization had the same crystal structure. With analysis of the force-displacement curves, the KCl quenched samples had a hardness that was 10 times higher than the recrystallized KCl, while acetaminophen quenched samples were 25% harder than the recrystallized samples. The elastic moduli of the quenched samples were also much greater than that observed for the recrystallized samples. Although the elasticity was independent of load, the hardness increased with load for acetaminophen. With each sample, the flow at constant load increased with applied load. Etching patterns obtained by atomic force microscopy showed that the KCl quenched sample had a higher dislocation density than the recrystallized sample, although there was no evident difference in the acetaminophen samples. Overall, the differences in the observed sample properties may be related to the dislocation density. Thus, nanoindentation has been shown to be a sensitive method for determining a processed-induced change in the hardness, creep, and elasticity of KCl and acetaminophen. (c) 2004 Wiley-Liss, Inc.

Prediction of recrystallization behavior of troglitazone/polyvinylpyrrolidone solid dispersion by solid-state NMR.

PubMed

Ito, Atsutoshi; Watanabe, Tomoyuki; Yada, Shuichi; Hamaura, Takeshi; Nakagami, Hiroaki; Higashi, Kenjirou; Moribe, Kunikazu; Yamamoto, Keiji

2010-01-04

The purpose of this study was to elaborate the relationship between the (13)C CP/MAS NMR spectra and the recrystallization behavior during the storage of troglitazone solid dispersions. The solid dispersions were prepared by either the solvent method or by co-grinding. The recrystallization behavior under storage conditions at 40 degrees C/94% RH was evaluated by the Kolmogorov-Johnson-Mehl-Avrami (KJMA) equation. Solid dispersions prepared by the solvent method or by prolonged grinding brought about inhibition of the nucleation and the nuclei growth at the same time. No differences in the PXRD profiles were found in the samples prepared by the co-grinding and solvent methods, however, (13)C CP/MAS NMR showed significant differences in the spectra. The correlation coefficients using partial least square regression analysis between the PXRD profiles and the apparent nuclei-growth constant or induction period to nucleation were 0.1305 or 0.6350, respectively. In contrast, those between the (13)C CP/MAS NMR spectra and the constant or the period were 0.9916 or 0.9838, respectively. The (13)C CP/MAS NMR spectra had good correlation with the recrystallization kinetic parameters evaluated by the KJMA equation. Consequently, solid-state NMR was judged to be a useful tool for the prediction of the recrystallization behavior of solid dispersions.

Recrystallization Behavior in Mixed Solder Joints of BGA Components during Thermal Shock

NASA Astrophysics Data System (ADS)

Tan, Shihai; Han, Jing; Guo, Fu

2018-03-01

Sn-37Pb and Sn-3.0Ag-0.5Cu solder pastes printed onto a board were attached to ball grid array (BGA) samples using Sn-3.0Ag-0.5Cu solder balls. Before thermal shock, the initial grain orientations on the cross-section were obtained by scanning electron microscopy equipped with an electron backscattered diffraction system. Three mixed solder joints (two from the corner and another from the middle of the BGA component) and three lead-free solder joints (at the same positions) were selected to investigate the recrystallization behavior under thermal shock (TS) cycling conditions. All of the mixed and lead-free solder joints were initially single crystal. The results showed that recrystallization occurred in both the mixed and lead-free solder joints after 200 TS. For the mixed solder joints, more recrystallization was observed and the location of samples had a significant influence on their recrystallization behavior, while location was not as important for the lead-free samples after 200 TS in this study. Both the mixed and lead-free solder joints at the corner of BGA components showed the poorest reliability. According to misorientation distribution maps and subgrain rotation behaviors, the reliability of mixed solder joints was much poorer than that of lead-free solder joints.

Dynamic recrystallization mechanisms and their transition in the Daling Thrust (DT) zone, Darjeeling-Sikkim Himalaya

NASA Astrophysics Data System (ADS)

Ghosh, Subhajit; Bose, Santanu; Mandal, Nibir; Dasgupta, Sujoy

2016-04-01

The Daling Thrust (DT) delineates a zone of intense shear localization in the Lesser Himalayan Sequence (LHS) of the Darjeeling-Sikkim Himalaya. From microstructural studies of deformed quartzite samples, we show a transition in the dynamic recrystallization mechanism with increasing distance from the DT, dominated by grain boundary bulging (BLG) recrystallization closest to the DT, and progressively replaced by sub-grain rotation (SGR) recrystallization away from the thrust. The transition is marked by a characteristic variation in the fractal dimension (D) of grain boundaries, estimated from the area-perimeter method. For the BLG regime, D ≈ 1.046, which decreases significantly to a value as low as 1.025 for the SGR regime. Using the available thermal data for BLG and SGR recrystallization, we infer increasing deformation temperatures away from the DT in the hanging wall. Based on the quartz piezometer our estimates reveal strong variations in the flow stress (59.00 MPa to 16.00 MPa) over a distance of 1.2 km from the DT. Deformation mechanism maps constructed for different temperatures indicate that the strain rates (10- 12 S- 1 to 10- 14 S- 1) comply with the geologically possible range. Finally, we present a mechanical model to provide a possible explanation for the cause of stress intensification along the DT.

Effect of cold deformation on the recrystallization behavior of FePd alloy at the ordering temperature using electron backscatter diffraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Hung-Pin; Chen, Yen-Chun; Chen, Delphic

2014-08-15

In this study, the evolution of the recrystallization texture and microstructure was investigated after annealing of 50% and 90% cold-rolled FePd alloy at 530 °C. The FePd alloy was produced by vacuum arc melting in an atmosphere of 97% Ar and 3% H{sub 2}. The specimens were cold rolled to achieve 50% and 90% reduction in thickness. Electron backscatter diffraction measurements were performed on the rolling direction–normal direction section. With increased deformation from 50% to 90%, recrystallized texture transition occurs. For the 50% cold-rolled alloy, the preferred orientation is (0 1 0) [11 0 1], which is close to themore » cubic orientation after 400 h of annealing. For the 90% cold-rolled alloy, the orientation changes to (0 5 4) [22–4 5] after 16 h of annealing. - Highlights: • Texture and microstructure in cold-rolled FePd alloy was investigated during annealing using EBSD. • The recrystallized texture of 50% cold-rolled FePd is (0 1 0) [11 0 1] at 530 °C for 400 hours. • The recrystallized texture of 90% cold-rolled FePd is changed to (0 5 4) [22–4 5] at 530 °C after 16 hours.« less

Dynamic recrystallization and texture evolution of Mg–Y–Zn alloy during hot extrusion process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tong, L.B.; Li, X.; Guangzhou Research Institute of Non-ferrous Metals, Guangzhou 510651

2014-06-01

The microstructure and texture evolution of Mg{sub 98.5}Y{sub 1}Zn{sub 0.5} and Mg{sub 92.5}Y{sub 5}Zn{sub 2.5} (atomic percent) alloys during hot extrusion were systematically investigated. The coarse LPSO phases with higher volume fraction (∼ 57%) suppressed the twinning generation in the initial stage of extrusion, and accelerated the dynamic recrystallization through the particle deformation zones. Therefore, the volume fraction of DRXed grains in as-extruded Mg{sub 92.5}Y{sub 5}Zn{sub 2.5} alloy was much higher than that of Mg{sub 98.5}Y{sub 1}Zn{sub 0.5} alloy. The intensive recrystallization process resulted in the conventional basal texture weakening, although the texture evolution was mainly dominated by flow behavior.more » The dynamic recrystallization behavior in Mg{sub 92.5}Y{sub 5}Zn{sub 2.5} alloy restricted the formation of deformation texture, and thus the more random texture was observed during the whole extrusion process. - Highlights: • The densely coarse LPSO phases suppressed the twinning deformation. • Coarse LPSO phases induced the particle stimulated nucleation effect. • Dynamic recrystallization resulted in the basal texture weakening effect.« less

Pioneering In Situ Recrystallization during Bead Milling: A Top-down Approach to Prepare Zeolite A Nanocrystals.

PubMed

Anand, Chokkalingam; Yamaguchi, Yudai; Liu, Zhendong; Ibe, Sayoko; Elangovan, Shanmugam P; Ishii, Toshihiro; Ishikawa, Tsuyoshi; Endo, Akira; Okubo, Tatsuya; Wakihara, Toru

2016-07-05

Top-down approach has been viewed as an efficient and straightforward method to prepare nanosized zeolites. Yet, the mechanical breaking of zeolite causes amorphization, which usually requires a post-milling recrystallization to obtain fully crystalline nanoparticles. Herein we present a facile methodology to prepare zeolite nanocrystals, where milling and recrystallization can be performed in situ. A milling apparatus specially designed to work under conditions of high alkalinity and temperature enables the in situ recrystallization during milling. Taking zeolite A as an example, we demonstrate its size reduction from ~3 μm to 66 nm in 30 min, which is quite faster than previous methods reported. Three functions, viz., miniaturization, amorphization and recrystallization were found to take effect concurrently during this one-pot process. The dynamic balance between these three functions was achieved by adjusting the milling period and temperature, which lead to the tuning of zeolite A particle size. Particle size and crystallinity of the zeolite A nanocrystals were confirmed by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and water adsorption-desorption. This work presents a pioneering advancement in this field of nanosized zeolites, and will facilitate the mass production as well as boost the wide applications of nanosized zeolites.

Pioneering In Situ Recrystallization during Bead Milling: A Top-down Approach to Prepare Zeolite A Nanocrystals

PubMed Central

Anand, Chokkalingam; Yamaguchi, Yudai; Liu, Zhendong; Ibe, Sayoko; Elangovan, Shanmugam P.; Ishii, Toshihiro; Ishikawa, Tsuyoshi; Endo, Akira; Okubo, Tatsuya; Wakihara, Toru

2016-01-01

Top-down approach has been viewed as an efficient and straightforward method to prepare nanosized zeolites. Yet, the mechanical breaking of zeolite causes amorphization, which usually requires a post-milling recrystallization to obtain fully crystalline nanoparticles. Herein we present a facile methodology to prepare zeolite nanocrystals, where milling and recrystallization can be performed in situ. A milling apparatus specially designed to work under conditions of high alkalinity and temperature enables the in situ recrystallization during milling. Taking zeolite A as an example, we demonstrate its size reduction from ~3 μm to 66 nm in 30 min, which is quite faster than previous methods reported. Three functions, viz., miniaturization, amorphization and recrystallization were found to take effect concurrently during this one-pot process. The dynamic balance between these three functions was achieved by adjusting the milling period and temperature, which lead to the tuning of zeolite A particle size. Particle size and crystallinity of the zeolite A nanocrystals were confirmed by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and water adsorption-desorption. This work presents a pioneering advancement in this field of nanosized zeolites, and will facilitate the mass production as well as boost the wide applications of nanosized zeolites. PMID:27378145

Structure of Hole 1256D: The role of mechanical deformation in superfast-spread crust

NASA Astrophysics Data System (ADS)

Tartarotti, P.; Hayman, N. W.; Anma, R.; Crispini, L.; Veloso Espinosa, E. A.; Galli, L.

2006-12-01

One view of seafloor spreading is that mechanical deformation is not significant at high spreading rates. With recovery of up to 37%, and the vertical axis known for many pieces, shipboard visual core descriptions from Hole 1256D provide an opportunity to evaluate the significance of deformational structures in EPR-, superfast- (~220 mm-yr) spread crust. From top to bottom, the structural characteristics of crustal units are: (1) A relatively flat-lying, ~100-m thick "lava pond" that is largely free of deformational structures; (2) ~184 m of shallowly dipping lava flows remarkable for hyaloclastites and a cooling-related fracture system; (3) ~466 m of massive and sheet flows with flow-related fractures, hydrothermal veins, and (fault-related) cataclastic domains; (3) A ~61 m thick transition zone that contains a well-developed (fault-related) cataclastic domain; (4) A ~346 m thick sheeted dike complex, with abundant hydrothermal veins, local breccias, and magmatic flow features. Recovered chilled dike margins have a mean dip of 70° and range from 41-88°; (5) A ~100 m thick plutonic suite contains gabbroic rocks that intrude the sheeted dikes. Gabbros contain some local brittle structures and minor (largely static) recrystallized domains, but are more noteworthy for their magmatic features: dike/gabbro contacts and flow foliations are modestly dipping (e.g., ~45°) with leucocratic melt patches concentrated toward the top of the section. Brittle structures were subordinate to magmatic processes in accommodating large extensional strain. Brittle deformation was important, however, in accommodating magmatism and hydrothermal fluid flow, thereby affecting the variation of crustal physical properties and the distribution of oceanic alteration.

Recrystallization and anatexis along the plutonic-volcanic contact of the Turkey Creek caldera, Arizona

USGS Publications Warehouse

du Bray, E.A.; Pallister, J.S.

1999-01-01

Unusual geologic and geochemical relations are preserved along the contact between intracaldera tuff and a resurgent intrusion within the 26.9 Ma Turkey Creek caldera of southeast Arizona. Thick intracaldera tuff is weakly argillically altered throughout, except in zones within several hundred meters of its contact with the resurgent intrusion, where the groundmass of the tuff has been variably converted to granophyre and unaltered sanidine phenocrysts are present. Dikes of similarly granophyric material originate at the tuff-resurgent intrusion contact and intrude overlying intracaldera megabreccia and tuff. Field relations indicate that the resurgent intrusion is a laccolith and that it caused local partial melting of adjacent intracaldera tuff. Geochemical and petrographic relations indicate that small volumes of partially melted intracaldera tuff assimilated and mixed with dacite of the resurgent intrusion along their contact, resulting in rocks that have petrographic and compositional characteristics transitional between those of tuff and dacite. Some of this variably contaminated, second-generation magma coalesced, was mobilized, and was intruded into overlying intracaldera rocks. Interpretation of the resurgent intrusion in the Turkey Creek and other calderas as intracaldera laccoliths suggests that intrusions of this type may be a common, but often unrecognized, feature of calderas. Development of granophyric and anatectic features such as those described here may be equally common in other calderas. The observations and previously undocumented processes described here can be applied to identification and interpretation of similarly enigmatic relations and rocks in other caldera systems. Integration of large-scale field mapping with detailed petrographic and chemical data has resulted in an understanding of otherwise intractable but petrologically important caldera-related features.

Growth of plutons by incremental emplacement of sheets in crystal-rich host: Evidence from Miocene intrusions of the Colorado River region, Nevada, USA

NASA Astrophysics Data System (ADS)

Miller, Calvin F.; Furbish, David J.; Walker, Barry A.; Claiborne, Lily L.; Koteas, G. Christopher; Bleick, Heather A.; Miller, Jonathan S.

2011-03-01

Growing evidence supports the notion that plutons are constructed incrementally, commonly over long periods of time, yet field evidence for the multiple injections that seem to be required is commonly sparse or absent. Timescales of up to several million years, among other arguments, indicate that the dominant volume does not remain largely molten, yet if growing plutons are constructed from rapidly solidifying increments it is unlikely that intrusive contacts would escape notice. A model wherein magma increments are emplaced into melt-bearing but crystal-rich host, rather than either solid or crystal-poor material, provides a plausible explanation for this apparent conundrum. A partially solidified intrusion undoubtedly comprises zones with contrasting melt fraction and therefore strength. Depending on whether these zones behave elastically or ductilely in response to dike emplacement, intruding magma may spread to form sheets by either of two mechanisms. If the melt-bearing host is elastic on the relevant timescale, magma spreads rather than continuing to propagate upward, where it encounters a zone of higher rigidity (higher crystal fraction). Similarly, if the dike at first ascends through rigid, melt-poor material and then encounters a zone that is weak enough (poor enough in crystals) to respond ductilely, the ascending material will also spread because the dike tip ceases to propagate as in rigid material. We propose that ascending magma is thus in essence trapped, by either mechanism, within relatively crystal-poor zones. Contacts will commonly be obscure from the start because the contrast between intruding material (crystal-poorer magma) and host (crystal-richer material) is subtle, and they may be obscured even further by subsequent destabilization of the crystal-melt framework. Field evidence and zircon zoning stratigraphy in plutons of the Colorado River region of southern Nevada support the hypothesis that emplacement of magma replenishments into a crystal-laden host is important in pluton construction. The dominant granite unit of the Spirit Mountain batholith displays only subtle internal contacts. However, ages and elemental zoning in zircons demonstrate a protracted history of almost 2 million years, major fluctuations in T and host melt chemistry, and mixing of strongly contrasting populations of magmatic zircon in single samples. We interpret this to reflect reactivation of rigid sponge and mush and entrainment of earlier-formed crystals, and we infer that this was in response to granitic replenishment. Much of the smaller Aztec Wash pluton comprises interlayered cumulate-textured quartz monzonite and mafic sheets. The latest phase of pluton emplacement is marked by numerous thick, fine-grained granite "sills" that intruded the subhorizontal quartz monzonite sheets. Contacts between granite and quartz monzonite are "soft," highly irregular on cm-dm scale with coarse xenocrysts from the quartz monzonite entrained in the fine-grained granite. We interpret the granite replenishments to have spread laterally within crystal-rich, melt-bearing quartz monzonite beneath rigid mafic sheets. In this case, clear evidence for the emplacement process is fortuitously preserved because the granite was emplaced in the waning stage of the thermal lifetime of the pluton, and because the mafic sheets enhance the strength contrast and make the geometry more visible. Similar "sills" of fine-grained granite were also preserved during the late stages of the history of the Spirit Mountain batholith.

Zircon U-Th and U-Pb Ages From Quaternary Silicic Volcanic and Plutonic Rocks, and Their Bearing on Granitoid Batholiths

NASA Astrophysics Data System (ADS)

Bacon, C. R.

2007-12-01

In the ten years since publication of M. Reid et al.'s seminal paper on zircon ages from rhyolites (EPSL 150:2-39, 1997) >20 papers have appeared on SIMS 238U-230Th and 238U-206Pb geochronology of zircon from silicic volcanic rocks, plutonic xenoliths, and young intrusions. In some cases, as well as for U-Pb studies of Tertiary granitoids, plutonic samples are interpreted in the context of related volcanism. These geochronologic data have advanced conceptual models of silicic magma genesis and pluton construction. Of fundamental importance are discoveries that zircons in volcanic rocks typically pre-date eruption by 10's to 100's of kyr and that multiple zircon populations are common; these crystals are "antecrysts" recycled from intrusive rocks or crystal mush of the system that vented. Resolving such age differences is possible with U-Th at <300 ka but is challenging with U-Pb, where SIMS precision limits resolution of differences on the order of 100 kyr for Pleistocene-Miocene zircons. Cathodoluminescence (CL) imaging of polished crystals guides beam placement but leads to sampling bias that favors high-U regions. Thus, although model-age histograms and relative probability plots identify zircon age populations, they are unlikely to accurately define relative abundances of age groups. Microbeam analysis collects data for the entire volume sampled but only SIMS depth-profiling into crystal faces can spatially resolve fine zones. ID-TIMS analysis of CL-imaged zircon fragments can improve U-Pb precision. SIMS complements geochronology with trace element fingerprints of zircon growth environments and enables Ti-in-zircon thermometry. Literature examples illustrate recent findings: (1) rhyodacite lava at Crater Lake contains zircons derived from late Pleistocene granodiorite represented by blocks ejected in the caldera-forming eruption; (2) zircons in Mount St. Helens dacites grew at sub-eruption temperatures and pre-date eruptions by up to 250 kyr; (3) Miocene plutons near Mount Rainier and the Colorado River were emplaced and crystallized in pulses over ~2-3-Myr periods, some with coeval volcanics; and (4) Cretaceous batholiths in the Sierra Nevada and North Cascades preserve evidence of assembly over as much as 10 Myr; individual samples contain zircons that crystallized during intervals of >1 Myr. Zircon ages and wide-ranging trace element concentrations suggest crystallization mainly in differentiated melt pockets in high-crystallinity magmas that may repeatedly freeze and thaw. Some high-Th/U, incompatible-element rich, spongy textured zircons grew very late, in the presence of oxidizing fluid. Not all zircons survive recycling into undersaturated magmas, in which zircon will dissolve given enough time, depending on temperature and dissolved volatiles. Recent zircon geochronologic results for volcanic and plutonic rocks lend credence to the "mush model" of rhyolite genesis and batholith consolidation. Crystal-poor rhyolites and leucogranites are melts segregated by compaction or gas-driven filter pressing from granitoid crystal mush emplaced incrementally in the middle to upper crust and powered by basaltic magma repeatedly injected into the lower reaches of the mush column. Balance between heat loss and basaltic influx determines whether the mush freezes or partially thaws at any given time, blurs internal contacts in resulting plutons, and can produce large volumes of crystal-rich ignimbrite or rapid separation and eruption of crystal-poor rhyolite. Lifetimes of the largest volcano-plutonic systems, such as the Altiplano-Puna or Southern Rocky Mountains volcanic fields, are comparable to the ~10 Myr of the Tuolumne Intrusive Suite.

Geology of the Northern Part of the Harcuvar Complex, West-Central Arizona

USGS Publications Warehouse

Bryant, Bruce; Wooden, J.L.

2008-01-01

In west-central Arizona near the northeast margin of the Basin and Range Province, the Rawhide detachment fault separates Tertiary and older rocks lacking significant effects of Tertiary metamorphism from Precambrian, Paleozoic, and Mesozoic rocks in the Harcuvar metamorphic core complex below. Much of the northern part of the Harcuvar complex in the Buckskin and eastern Harcuvar Mountains is layered granitic gneiss, biotite gneiss, amphibolite, and minor pelitic schist that was probably deformed and metamorphosed in Early Proterozoic time. In the eastern Buckskin Mountains, Early and Middle Proterozoic plutons having U-Pb zircon ages of 1,683?6.4 mega-annum (Ma) and 1,388?2.3 Ma, respectively, intruded the layered gneiss. Small plutons of alkaline gabbro and diorite intruded in Late Jurassic time. A sample of mylonitized diorite from this unit has a U-Pb zircon age of 149?2.8 Ma. In the Early Cretaceous, amphibolite facies regional metamorphism was accompanied by partial melting and formation of migmatite. Zircon from a granitic layer in migmatitic gneiss in the eastern Harcuvar Mountains has a U-Pb age of 110?3.7 Ma. In the Late Cretaceous, sills and plutons of the granite of Tank Pass were emplaced in both the Buckskin and eastern Harcuvar Mountains. In the Buckskin Mountains those intrusions are locally numerous enough to form an injection migmatite. A pluton of this granite crops out over almost half the area of the eastern Harcuvar Mountains. Paleozoic and Mesozoic sedimentary rocks were caught as slices along south-vergent Cretaceous thrusts related to the Maria fold and thrust belt and were metamorphosed beneath a thick sheet of Proterozoic crustal rocks. Inception of volcanism and basin formation in upper-plate rocks indicates that regional extension started at about 26 Ma, in late Oligocene. The Swansea Plutonic Suite, composed of rocks ranging from gabbro to granite, intruded the lower-plate rocks in the Miocene and Oligocene(?). Granite and a gabbro from the suite have a U-Pb zircon age of 21.86?0.60 Ma. Previously published 40Ar/39Ar ages of hornblende suggest that some of the Swansea Suite is Oligocene. The felsic rocks contain numerous inclusions ranging from porphyritic granite to porphyritic granodiorite. A sample from one inclusion has a U-Pb zircon age of 1,409?6.3 Ma. A discordia line for the U-Pb zircon data from the Swansea Plutonic Suite has an upper intercept at 1,408?3.4 Ma. The Swansea Plutonic Suite probably formed by interaction between mantle material and plutonic rocks at least as old as Middle Proterozoic. An irregular layer in the middle crust, which is thickest under and adjacent to the Buckskin Mountains, may be the level where that interaction took place. During extensional deformation these rocks and all the older rocks were displaced southwest from beneath the rocks of the Colorado Plateau transition zone below an area extending 50?80 kilometers northeast of the Buckskin Mountains as far as Bagdad, Arizona, or beyond. At that time the rocks were variably mylonitized, and a northeast-trending lineation formed. Much of the evidence for the complex sequence of structural events preserved in these rocks in the western Harcuvar Mountains has been obliterated in the northern Harcuvar complex by Miocene deformation.

Growth of plutons by incremental emplacement of sheets in crystal-rich host: Evidence from Miocene intrusions of the Colorado River region, Nevada, USA

USGS Publications Warehouse

Miller, C.F.; Furbish, D.J.; Walker, B.A.; Claiborne, L.L.; Koteas, G.C.; Bleick, H.A.; Miller, J.S.

2011-01-01

Growing evidence supports the notion that plutons are constructed incrementally, commonly over long periods of time, yet field evidence for the multiple injections that seem to be required is commonly sparse or absent. Timescales of up to several million years, among other arguments, indicate that the dominant volume does not remain largely molten, yet if growing plutons are constructed from rapidly solidifying increments it is unlikely that intrusive contacts would escape notice. A model wherein magma increments are emplaced into melt-bearing but crystal-rich host, rather than either solid or crystal-poor material, provides a plausible explanation for this apparent conundrum. A partially solidified intrusion undoubtedly comprises zones with contrasting melt fraction and therefore strength. Depending on whether these zones behave elastically or ductilely in response to dike emplacement, intruding magma may spread to form sheets by either of two mechanisms. If the melt-bearing host is elastic on the relevant timescale, magma spreads rather than continuing to propagate upward, where it encounters a zone of higher rigidity (higher crystal fraction). Similarly, if the dike at first ascends through rigid, melt-poor material and then encounters a zone that is weak enough (poor enough in crystals) to respond ductilely, the ascending material will also spread because the dike tip ceases to propagate as in rigid material. We propose that ascending magma is thus in essence trapped, by either mechanism, within relatively crystal-poor zones. Contacts will commonly be obscure from the start because the contrast between intruding material (crystal-poorer magma) and host (crystal-richer material) is subtle, and they may be obscured even further by subsequent destabilization of the crystal-melt framework. Field evidence and zircon zoning stratigraphy in plutons of the Colorado River region of southern Nevada support the hypothesis that emplacement of magma replenishments into a crystal-laden host is important in pluton construction. The dominant granite unit of the Spirit Mountain batholith displays only subtle internal contacts. However, ages and elemental zoning in zircons demonstrate a protracted history of almost 2 million years, major fluctuations in T and host melt chemistry, and mixing of strongly contrasting populations of magmatic zircon in single samples. We interpret this to reflect reactivation of rigid sponge and mush and entrainment of earlier-formed crystals, and we infer that this was in response to granitic replenishment. Much of the smaller Aztec Wash pluton comprises interlayered cumulate-textured quartz monzonite and mafic sheets. The latest phase of pluton emplacement is marked by numerous thick, fine-grained granite "sills" that intruded the subhorizontal quartz monzonite sheets. Contacts between granite and quartz monzonite are "soft," highly irregular on cm-dm scale with coarse xenocrysts from the quartz monzonite entrained in the fine-grained granite. We interpret the granite replenishments to have spread laterally within crystal-rich, melt-bearing quartz monzonite beneath rigid mafic sheets. In this case, clear evidence for the emplacement process is fortuitously preserved because the granite was emplaced in the waning stage of the thermal lifetime of the pluton, and because the mafic sheets enhance the strength contrast and make the geometry more visible. Similar "sills" of fine-grained granite were also preserved during the late stages of the history of the Spirit Mountain batholith. ?? 2009 Elsevier B.V.

The Age of the intra-Danubian Suture (Southern Carpathians, Romania)

NASA Astrophysics Data System (ADS)

Balica, C.; Hann, H. P.; Chen, F.; Balintoni, I. C.; Zaharia, L.

2007-12-01

The Southern Carpathians, as an Alpine chain are formed of two domains, namely the Getic Domain (GD) and the Danubian Domain (DD). The basement of DD is represented by two terranes, named Dragsan and Lainici- Paius sutured through Tisovita-Iuti ophiolitic complex. The two terranes were invaded by large granitic plutons, some of them being dated as Late Proterozoic by U/Pb method. Yet, along the inferred suture there are four granitic bodies whose ages have been only assumed by their geological relations. From North to South the four bodies sampled for LA-ICP-MS zircon U/Pb dating are: Muntele Mic, Sfardinu, Cherbelezu and Ogradena. The previously CL imaged zircon crystals were ablated at the China's University of Geosciences facilities in Wuhan. The zircons from all samples showed quite complex structures, with many inherited cores or affected by lead loss processes. In order to get a mean age for every pluton, we used the weighted average plots by projecting the 206Pb/238U apparent ages. The crystallization age of the Poiana Marului pluton is around 326.7±7 Ma (MSWD 1.6). A set of sixteen apparent ages ranging between 400 to 648 Ma together with other tree points indicating 897, 1353 and 1693 Ma, represent inheritances. There was no observable lead loss process in this data set. The Sfardinu granite crystallized at 310±7.9 Ma (MSWD 4.8). The inheritances found in this sample are at 427 and 723 Ma, but an important lead loss process occurred later, as indicated by ten apparent ages between 240-292 Ma. Cherbelezu granite gave a crystallization mean age of 326.9±4.9 Ma (MSWD 1.9). A single inherited core appears at 502 Ma, yet eight apparent ages ranging between 239-295 Ma signalize again an important lead loss process. Other two ages at 176 and 193 Ma confirm the presence of this process. The Ogradena pluton zircons display two possible crystallization ages for the outer zones of zircon grains, at 356.6±7.8 Ma (twelve apparent ages, MSWD 12) and 314.1±7.8 Ma (nine apparent ages, MSWD 13) respectively. It is difficult to explain this situation, and we suppose the second figure as the probable crystallization age. Inheritances are represented by a number of 37 206Pb/238U apparent ages scattered between 400 and 612 Ma, only one apparent age of 265 Ma possibly proving the presence of lead loss. The geochemical parameters ASI, Fe-number and MALI calculated from the major oxides analyses showed that all four plutons are metaluminous and magnezian. Both Cherbelezu and Ogradena have a calcalkaline character near to alkalicalcic while Muntele Mic and Sfardinu are alkalicalcic. Geochemically, all four plutons are closed to Cordilleran type, main portion or a little inboard of it. Out of these data several conclusions can be drawn. The age of the intra-Danubian suture is late Visean to Bashkirian or late Variscan. Muntele Mic and Ogradena granites exhibit abundant Cadomian inheritances, while Cherbelezu and Sfardinu plutons seem affected by lead loss processes due to an important thermotectonic event happened during 250 to 290 Ma interval. The emplacement of the four plutons probably reflects a subductional process. Finally, the inheritances suggest a Gondwanan source for the anatectic material.

1.1 Ga K-rich alkaline plutonism in the SW Grenville Province

NASA Astrophysics Data System (ADS)

Corriveau, Louise; Heaman, Larry M.; Marcantonio, Franco; van Breemen, Otto

1990-09-01

U-Pb zircon and baddeleyite dating of six syenitic stocks establishes that the ultrapotassic, potassic alkaline and shoshonitic magmatism with island-arc affinities in the Central Metasedimentary Belt (CMB) of the southwestern Grenville Province, Canada took place between 1089 and 1076 Ma, along a 400-km-long, northeast-trending plutonic belt. These ages indicate that ultrapotassic rocks with arc affinities are not unique to the Phanerozoic. West to east emplacement ages along a northern and southern cross-section of this belt range from 1083±2 Ma (Kensington), through 1081±2 Ma (Lac Rouge) to 1076{-1/+3}Ma (Loranger) in the north, and from 1089{-3/+4}Ma (loon Lake) and 1088±2 Ma (Calabogie), to 1076±2 Ma (Westport) in the south. Although closely spaced in time, in detail these ages suggest a slight younging of this magmatic activity to the southeast. Integration of the geochronological data with the spatial extent and potassic character of the plutons shows that the K-rich alkaline suite is distinct from the nepheline-syenite belt of the Bancroft terrane and from the syenite-monzonite suite of the Frontenac terrane of the CMB, and it is considered to be a magmatic episode unique to the Elzevir terrane and its Gatineau segment. The timing and the postmetamorphic emplacement of these plutons indicate that the regional greenschist to granulite-facies metamorphism of the country rock (precise age unknown) is older than 1089 Ma throughout the entire Elzevir terrane. The potassic magmatism is interpreted as the initiation of the 1090 1050 Ma Ottawan Orogeny in the Elzevir terrane; thus, the regional metamorphism in this terrane, previously assigned to the Ottawan Orogeny, is an earlier event. The contemporaneous emplacement of this postmetamorphic plutonic belt with Keweenawan volcanism is at variance with current tectonic models which consider the Keweenawan rift to be formed at the same time as regional metamorphism in the CMB.

Thondhjemite of the Talkeetna Mountains: An unusually large low-K pluton in Alaska's Peninsular terrane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ford, A.B.; Arth, J.G.; Csejtey, B.

1993-04-01

An unusually large, elongate Jurassic pluton of trondhjemite, about 120- by 10--15 km in dimensions, intruded Jurassic plutonic and metamorphic rocks of the Peninsular terrane in the central Talkeetna Mountains of south-central Alaska. Muscovite and biotite yield minimum ages of 150--145 Ma. The N40[degree]E-trending body is concordant with regional structures. It is the youngest member of a subduction-related Jurassic plutonic suite in the Peninsular terrane that, along with Wrangellia, was accreted to the North American continent in the middle Cretaceous. Rocks, commonly sheared, are medium to coarse grained and leucocratic (CI = 3--9). Biotite is the chief mafic mineral. Minormore » muscovite and garnet are common and green hornblende rare. Samples (n = 27) from the body's entire length have an average Mg[number sign] of 45 and an SiO[sub 2] continuum of 67--74% (avg. 70.7%). High Al[sub 2]O[sub 3] (14.4--17.9%, avg. 16.5%) is typical of continental trondhjemite. Averages for Zr (109 ppm) and Nb (3.5 ppm) and the ratios K/Rb (491) and Zr/Nb (34) are typical of orogenic igneous rocks of subduction origin. Four samples analyzed have low ([sup 87]Sr/[sup 86]Sr)[sub i] (avg. 0.7036). Very low Rb/Sr (avg. 0.027) is similar to Idaho batholith trondhjemites. REE patterns with low to moderate LREE and HREE with flat patterns and low contents suggest residual garnet or hornblende during partial melting or fractionation. The pluton appears homogeneous in outcrop. However, some geographic variations in chemistry, as in SiO[sub 2] contents and especially in Eu/Eu[sup *], suggest existence of perhaps three regionally separate plumbing systems, or chambers in which different processes such as plagioclase accumulation or hornblende fractionation were active.« less

Metamorphic ages constrain the timing and nature of heat flow into the lower crust of a magmatic arc, Fiordland New Zealand

NASA Astrophysics Data System (ADS)

Stowell, H. H.; Schwartz, J.; Klepeis, K. A.; Odom-Parker, K.; Hout, C.; Bollen, E.; Yelverton, J.

2017-12-01

Garnet ages for eclogite and granulite from the Western Fiordland Orthogneiss (WFO) provide a precise age for high-grade metamorphism and partial melting of the lower crust in a Cretaceous magmatic arc currently exposed in Fiordland, New Zealand. U/Pb zircon ages and pluton areas indicate that a high magmatic flux event between 118 and 115 Ma added >3,000 km2 of mid- to lower-crustal plutons. The high flux event was followed by high temperature metamorphism and partial melting which resulted in pervasive leucosomes, and trondhjemite layers and veins. At least 1,800 km2 of the newly added crust was metamorphosed to garnet granulite facies orthogneiss. Thermobarometry and phase diagram models indicate that garnet grew at 850 to 1,000°C and 12 to 14 kbar in this monzodiorite and diorite gneiss of the Misty, Malaspina, and Breaksea plutons. Sm-Nd garnet-rock isochrons for these three plutons of the WFO (>700 km2of lower crust) indicate that peak temperatures were reached at 111.7±1.0 Ma (N=16). The isotopic and chemical composition of zircon indicate that the Cretaceous arc flare-up was most likely triggered by partial melting and hybridization of subducted oceanic crust and enriched subcontinental lithospheric mantle directly prior to cessation of arc magmatism. The driving mechanism for the terminal magmatic surge is inferred to be propagation of a discontinuous slab tear beneath the arc, or a ridge-trench collision event between 136 and 128 Ma. The lack of ca. 112 Ma plutons in the western part of Fiordland negates a magmatic heat source for garnet granulite metamorphism. Therefore, we infer that high heat flow associated with mantle advection at the base of the arc after the magmatic surge continued for several m.y., heating the lower crust to granulite facies temperatures.

Age and isotopic systematics of Cretaceous borehole and surface samples from the greater Los Angeles Basin region: Implications for the types of crust that might underlie Los Angeles and their distribution along late Cenozoic fault systems

USGS Publications Warehouse

Premo, Wayne R.; Morton, Douglas M.; Kistler, Ronald W.

2014-01-01

Nine U-Pb zircon ages were determined on plutonic rocks sampled from surface outcrops and rock chips of drill core from boreholes within the greater Los Angeles Basin region. In addition, lead-strontium-neodymium (Pb-Sr-Nd) whole-rock isotopic data were obtained for eight of these samples. These results help to characterize the crystalline basement rocks hidden in the subsurface and provide information that bears on the tectonic history of the myriad of fault systems that have dissected the Los Angeles region over the past 15 m.y. Seven of the nine samples have U-Pb ages ranging from 115 to 103 Ma and whole-rock Pb-Sr-Nd isotopic characteristics that indicate the crystalline basement underneath the greater Los Angeles Basin region is mostly part of the Peninsular Ranges batholith. Furthermore, these data are interpreted as evidence for (1) the juxtaposition of mid-Cretaceous, northern Peninsular Ranges batholith plutonic rocks against Late Cretaceous plutonic rocks of the Transverse Ranges in the San Fernando Valley, probably along the Verdugo fault; (2) the juxtaposition of older northwestern Peninsular Ranges batholith rocks against younger northeastern Peninsular Ranges batholith rocks in the northern Puente Hills, implying transposition of northeastern Peninsular Ranges batholith rocks to the west along unrecognized faults beneath the Chino Basin; and (3) juxtaposition of northern Peninsular Ranges batholith plutonic rocks against Late Cretaceous plutonic rocks of the Transverse Ranges along the San Jose fault in the northern San Jose Hills at Ganesha Park. These mainly left-lateral strike-slip faults of the eastern part of the greater Los Angeles Basin region could be the result of block rotation within the adjacent orthogonal, right-lateral, Elsinore-Whittier fault zone to the west and the subparallel San Jacinto fault zone to the east. The San Andreas fault system is the larger, subparallel, driving force further to the east.

Lithospheric delamination in post-collisional setting: Evidence from intrusive magmatism from the North Qilian orogen to southern margin of the Alxa block, NW China

NASA Astrophysics Data System (ADS)

Zhang, Liqi; Zhang, Hongfei; Zhang, Shasha; Xiong, Ziliang; Luo, Biji; Yang, He; Pan, Fabin; Zhou, Xiaochun; Xu, Wangchun; Guo, Liang

2017-09-01

Post-collisional granitoids are widespread in the North Qilian and southern margin of the Alxa block and their petrogenesis can provide important insights into the lithospheric processes in a post-collisional setting. This paper carries out an integrated study of U-Pb zircon dating, geochemical and Sr-Nd-Hf isotopic compositions for five early Paleozoic intrusive plutons from the North Qilian to southern margin of the Alxa block. The geochronological and geochemical results show that their magmatism can be divided into three periods with distinct geochemical features. The early-period intrusive rocks ( 440 Ma) include the Lianhuashan (LHS) and Mengjiadawan (MJDW) granodiorites. Both of them display high Sr/Y ratios (52-91), coupled with low Y and HREE contents, implying that they were derived from partial melting of thickened lower crust, with garnet in the residue. The middle-period intrusive rocks ( 430 Ma), including the MJDW quartz diorites and Yangqiandashan (YQDS) granodiorites, are high-K calc-alkaline with low Sr/Y values. The geochemical and isotopic data suggest that they are generated from partial melting of lower crust without garnet in the residue. The late-period intrusive rocks (414-422 Ma), represented by the Shengrongsi (SRS) and Xinkaigou (XKG) plutons, are A-type or alkali-feldspar granites. They are possibly derived from partial melting of felsic crustal material under lower pressure condition. Our data show decreasing magma crystallization ages from MJDW pluton in the north and LHS pluton in the south to the SRS and XKG plutons in the central part of the study area. We suggest that such spatial and temporal variations of magmatic suites were caused by lithospheric delamination after the collision between the Central Qilian and the Alxa block. A more plausible explanation is that the delamination propagated from the margin part of the thickened lithosphere to inward beneath the North Qilian and southern margin of the Alxa block.

Aeromagnetic and Gravity Maps of the Central Marysvale Volcanic Field, Southwestern Utah

USGS Publications Warehouse

Campbell, David L.; Steven, Thomas A.; Cunningham, Charles G.; Rowley, Peter D.

1999-01-01

Gravity and aeromagnetic features in the Marysvale volcanic field result from the composite effects of many factors, including rock composition, style of magmatic emplacement, type and intensity of rock alteration, and effects of structural evolution. Densities and magnetic properties measured on a suite of rock samples from the Marysvale volcanic field differ in systematic ways. Generally, the measured densities, magnetic susceptibilities, and natural remanent magnetizations all increase with mafic index, but decrease with degree of alteration, and for tuffs, with degree of welding. Koenigsberger Q indices show no such systematic trends. The study area is divided into three geophysical domains. The northern domain is dominated by aeromagnetic lows that probably reflect reversed-polarity volcanic flows. There are no intermediate-sized magnetic highs in the northern domain that might reflect plutons. The northern domain has a decreasing-to-the-south gravity gradient that reflects the Pavant Range homocline. The central domain has gravity lows that reflect altered rocks in calderas and low-density plutons of the Marysvale volcanic field. Its aeromagnetic signatures consist of rounded highs that reflect plutons and birdseye patterns that reflect volcanic flows. In many places the birdseyes are attenuated, indicating that the flows there have been hydrothermally altered. We interpret the central domain to reflect an east-trending locus of plutons in the Marysvale volcanic field. The southern domain has intermediate gravity fields, indicating somewhat denser rocks there than in the central domain, and high-amplitude aeromagnetic birdseyes that reflect unaltered volcanic units. The southern domain contains no magnetic signatures that we interpret to reflect plutons. Basin-and-range tectonism has overprinted additional gravity features on the three domains. A deep gravity low follows the Sevier and Marysvale Valleys, reflecting grabens there. The gravity gradient in the north reflects the southern flank of a structural dome that led to the Pavant Range homocline and whose southern edge lies along the Clear Creek downwarp.

Petrochronology of Granitoids in the Langshan Reveals Carboniferous Plutonism along the Northeast Edge of the Alxa Block (NW China)

NASA Astrophysics Data System (ADS)

Rea-Downing, G.; Lippert, P. C.; Stearns, M.

2017-12-01

The Alxa block is positioned between the western North China Craton (NCC) to the east and the Tarim Craton to the west. Several first-order characteristics of the Alxa region remain largely unresolved due to the limited outcrop exposure and remote nature of the region. For example, the crustal affinity and thermo-tectonic history of the Alxa block throughout Central Asian terrane accretion may have pre-conditioned the Cenozoic and Recent strain. Recent paleomagnetic and detrital zircon studies within the Alxa block indicate that its basement geology and apparent polar wander path are substantially different from the NCC. These data suggest that Alxa was not initially part of the NCC. Identification of a suture between Alxa and the NCC, timing of the incorporation of the Alxa block with the NCC, and the correlation of well-studied tectono-thermal events occurring in the NCC to the comparatively understudied Alxa block to the west are poorly constrained. Preliminary petrochronologic data from granitoid bodies within the Langshan range address these limitations by characterizing the bedrock age and affinity along the NE edge of the Alxa block. LA-Q-ICP-MS analysis of zircons including U-Pb dates, major and minor trace elemental data, and rare earth element compositions are combined with bulk rock geochemistry to place early-mid Carboniferous ( 350 Ma) Langshan plutons in a regional context. The relative rarity of plutons of this age in a region replete with Permo-Triassic plutonism indicates that the Langshan includes a record of relatively understudied magmatism along the periphery of the NCC. The approach utilized here allows for 1) direct age and compositional comparisons to other Carboniferous-Permian plutons in central Asia and 2) a robust provenance data point for future detrital zircon studies of the Paleozoic paleogeography in the heart of Central Asia.

Ion-adsorption REEs in regolith of the Liberty Hill pluton, South Carolina, USA: An effect of hydrothermal alteration

USGS Publications Warehouse

Bern, Carleton R.; Yesavage, Tiffany; Foley, Nora K.

2017-01-01

Ion-adsorbed rare earth element (REE) deposits supply the majority of world heavy REE production and substantial light REE production, but relatively little is known of their occurrence outside Southeast Asia. We examined the distribution and forms of REEs on a North American pluton located in the highly weathered and slowly eroding South Carolina Piedmont. The Hercynian Liberty Hill pluton experiences a modern climate that includes ~ 1500 mm annual rainfall and a mean annual temperature of 17 °C. The pluton is medium- to coarse-grained biotite-amphibole granite with minor biotite granite facies. REE-bearing phases are diverse and include monazite, zircon, titanite, allanite, apatite and bastnäsite. Weathered profiles were sampled up to 7 m-deep across the ~ 400 km2 pluton. In one profile, ion-adsorbed REEs plus yttrium (REE + Y) ranged up to 581 mg/kg and accounted for up to 77% of total REE + Y in saprolite. In other profiles, ion-adsorbed REE + Y ranged 12–194 mg/kg and only accounted for 3–37% of totals. The profile most enriched in ion-adsorbed REEs was located along the mapped boundary of two granite facies and contained trioctahedral smectite in the saprolite, evidence suggestive of hydrothermal alteration of biotite at that location. Post-emplacement deuteric alteration can generate easily weathered REE phases, particularly fluorocarbonates. In the case of Liberty Hill, hydrothermal alteration may have converted less soluble to more soluble REE minerals. Additionally, regolith P content was inversely correlated with the fraction ion-adsorbed REEs, and weathering related secondary REE-phosphates were found in some regolith profiles. Both patterns illustrate how low P content aids in the accumulation of ion-adsorbed REEs. The localized occurrence at Liberty Hill sheds light on conditions and processes that generate ion-adsorbed REEs.

The distribution of uranium and thorium in granitic rocks of the basin and range province, Western United States

USGS Publications Warehouse

McNeal, J.M.; Lee, D.E.; Millard, H.T.

1981-01-01

Some secondary uranium deposits are thought to have formed from uranium derived by the weathering of silicic igneous rocks such as granites, rhyolites, and tuffs. A regional geochemical survey was made to determine the distribution of uranium and thorium in granitic rocks of the Basin and Range province in order to evaluate the potential for secondary uranium occurrences in the area. The resulting geochemical maps of uranium, thorium, and the Th:U ratio may be useful in locating target areas for uranium exploration. The granites were sampled according to a five-level, nested, analysis-of-variance design, permitting estimates to be made of the variance due to differences between:(1) two-degree cells; (2) one-degree cells; (3) plutons; (4) samples; and (5) analyses. The cells are areas described in units of degrees of latitude and longitude. The results show that individual plutons tend to differ in uranium and thorium concentrations, but that each pluton tends to be relatively homogeneous. Only small amounts of variance occur at the two degree and the between-analyses levels. The three geochemical maps that were prepared are based on one-degree cell means. The reproducibility of the maps is U > Th ??? Th:U. These geochemical maps may be used in three methods of locating target areas for uranium exploration. The first method uses the concept that plutons containing the greatest amounts of uranium may supply the greatest amounts of uranium for the formation of secondary uranium occurrences. The second method is to examine areas with high thorium contents, because thorium and uranium are initially highly correlated but much uranium could be lost by weathering. The third method is to locate areas in which the plutons have particularly high Th:U ratios. Because uranium, but not thorium, is leached by chemical weathering, high Th:U ratios suggest a possible loss of uranium and possibly a greater potential for secondary uranium occurrences to be found in the area. ?? 1981.

Orbicules and Comb Layers: Igneous Layering in Shallow Plutons as a Result of Mineral Growth in Subvolcanic Conduits

NASA Astrophysics Data System (ADS)

McCarthy, A. J.; Müntener, O.

2017-12-01

Different processes have been proposed to explain the variety of igneous layering in plutonic rocks. Vertical layering in particular has been described as resulting from various processes such as Ostwald ripening, oscillatory crystallization or reactive mush infiltration in cooling plutons. Comb layers and orbicules are formed by the growth of elongated, feather-like minerals growing ±perpendicular to the layering and nucleating either on dyke walls (comb layers) or on xenoliths (orbicules) at the contact between homogenous plutons. Through a detailed study of the mineralogy, bulk chemistry and the size-frequency distribution of representative comb layers and orbicules of the 110Ma Fisher Lake Pluton (Sierra Nevada, USA), we show that comb layers and orbicules show no evidence of forming through a self-organizing, oscillatory crystallization process, but represent crystallization fronts resulting from in-situ crystallization and extraction of evolved melt fractions during decompression-driven crystallization of superheated melts in subvolcanic conduits. The microstructures are dominated by the formation of a plagioclase-dominated cres-cumulate at the mm- to m-scale. We propose that the crystal content of the melt and the dynamics of the magmatic system control the mechanisms responsible for vertical igneous layering in shallow reservoirs. Moreover, the mineralogical and compositional variation of orbicules rims and comb layers can be ascribed to variations in pressure, temperature and cooling rates within the subvolcanic conduit, with estimated growth timescales of mm- to m-thick orbicules and comb layers ranging from weeks to years. Moreover, though plagioclase-glomerocrysts found in erupted volcanic products are generally interpreted as remobilized crystal-mush, we propose that some glomerocrysts might represent "failed" orbicules forming within vertical conduits upon eruption. Such glomerocrysts, as well as orbicules found in erupted volcanic products, might allow for unique insights into the dynamics, timescales and P-T conditions within volcanic conduits upon eruption.

Petrogenesis and tectonic implications of the Early Carboniferous to the Late Permian Barleik plutons in the West Junggar (NW China)

NASA Astrophysics Data System (ADS)

Liu, Bo; Han, Bao-Fu; Ren, Rong; Chen, Jia-Fu; Wang, Zeng-Zhen; Zheng, Bo

2017-02-01

The Paleozoic accretionary orogenesis and continental crustal growth in Central Asia are thought to have close relationship with the evolution of the Paleo-Asian Ocean (PAO). The well-exposed plutons in the northern Barleik Mountains of the West Junggar region, NW China, may provide essential insights into the evolution of the Junggar Ocean, a branch of the PAO, and mechanism of continental crustal growth. Our work on the Barleik plutons indicates an early suite of 324-320 Ma diorite and a late suite of 314-259 Ma quartz syenite and granitic porphyry. All the plutons are characterized by high-K calc-alkaline to shoshonitic signatures, varying depletion in Nb, Ta, Sr, P, Eu, and Ti, low initial 87Sr/86Sr ratios (0.70241-0.70585), strongly positive εNd(t) values (+ 5.7-+7.7), and young one-stage Nd model ages (390-761 Ma), suggesting that they resulted from different batches of magma that were produced by fractional crystallization of a metasomatized mantle source with minor crustal contamination. The diorite is coeval with the youngest arc magmatic rocks, indicating a subduction-related origin. By contrast, the quartz syenite and granitic porphyry are geochemically similar to A2-type granites, with high Zr, Ga, and FeOT/[FeOT + MgO], and are coeval with the widespread plutons in the West Junggar. This, together with the occurrence of Late Carboniferous fluvial deposits and the lack of < 320 Ma ophiolitic and subduction-related metamorphic lithologies, definitively indicates a post-collisional setting after the closure of the Junggar Ocean. Slab breakoff accompanied by asthenospheric upwelling and basaltic underplating is a possible geodynamic process that is responsible for the post-collisional magmatism and vertical crustal growth in the region. Thus a tectonic switch from subduction to post-collision started at the end of the Early Carboniferous ( 320 Ma), probably as a result of the final closure of the Junggar Ocean.

Hydrogen and oxygen isotope constraints on hydrothermal alteration of the Trinity peridotite, Klamath Mountains, California

USGS Publications Warehouse

Liakhovitch, V.; Quick, J.E.; Gregory, R.T.

2005-01-01

The Trinity peridotite represents a rare opportunity to examine a relatively fertile plagioclase peridotite that was exhumed and later subjected to intrusive events in a seafloor environment, followed by its emplacement and incorporation into a continent. Over 250 stable isotopic determinations on whole rocks and minerals elucidate the hydrothermal evolution of the Trinity complex. All three serpentine polymorphs are present in the Trinity peridotite; these separate on the basis of their ??D values: antigorite, -46 < ??D < -82??? and lizardite and chrysotile, -90 < ??D < -106 and -110 < ??D < -136???, respectively. Antigorite coexists with chlorite, talc, and tremolite in contact aureole assemblages associated with Silurian/Devonian gabbroic plutons. Lizardite and chrysotile alteration carries a meteoric signature, which suggests association with post-emplacement serpentinization, or overprinting of earlier low-temperature seafloor serpentinization. Regionally, contours of ??D values exhibit bull's-eye patterns associated with the gabbroic plutons, with ??D maxima coinciding with the blackwall alteration at the margins on the plutons. In contrast to the hydrogen isotope behavior, oxygen isotope values of the three polymorphs are indistinguishable, spanning the range 5.3 < ??18O< 7.5, and suggesting low integrated fluid fluxes and strongly 18O-shifted fluids. Inferred primary ?? 18O values for peridotite, gabbro, and late Mesozoic granodiorite indicate a progressive 18O enrichment with time for the source regions of the rocks. These isotopic signatures are consistent with the geology, petrochemistry, and geochronology of the Trinity massif, which indicate the following history: (1) lithospheric emplacement and cooling of the peridotite in an oceanic environment ??? 472 Ma; (2) intrusion of gabbroic plutons into cold peridotite in an arc environment between 435 and 404 Ma; and finally (3) intrusion of felsic plutons between 171 and 127 Ma, long after the peridotite was incorporated into the continental crust. Copyright ?? 2005 by V. H. Winston & Son, Inc. All rights reserved.

Biosignatures in the Recrystallized Shock Melt Pocket of ALH-77005 Shergottite — Clues to Martian Life

NASA Astrophysics Data System (ADS)

Gyollai, I.; Polgári, M.; Bérczi, Sz.; Gucsik, A.; Pál-Molnár, E.

2017-11-01

In the spinifex textured, recrystallized shock melt portion in ALH 77005 shergottite mineralized microbially produced texture (MMPT) - in form of pearl necklace-like, vermiform inner signatures - was measured, which we propose to have Martian origin.

Microstructural and rheological evolution of calcite mylonites during shear zone thinning: Constraints from the Mount Irene shear zone, Fiordland, New Zealand

NASA Astrophysics Data System (ADS)

Negrini, Marianne; Smith, Steven A. F.; Scott, James M.; Tarling, Matthew S.

2018-01-01

Layers of calc-mylonite in the Mount Irene shear zone, Fiordland, New Zealand, show substantial variations in thickness due to deflection of the shear zone boundaries around wall rock asperities. In relatively thick parts (c. 2.6 m) of the shear zone, calcite porphyroclasts are internally strained, contain abundant subgrain boundaries and have a strong shape preferred orientation (SPO) and crystallographic preferred orientation (CPO), suggesting that deformation occurred mainly by dislocation creep involving subgrain-rotation recrystallization. In relatively thin parts (c. 1.5 m) of the shear zone, aggregates of fine-grained recrystallized calcite surrounding flattened porphyroclasts have a weak SPO and CPO, and contain polygonal calcite grains with low degrees of internal misorientation. The recrystallized aggregates also contain microstructures (e.g. grain quadruple junctions, randomized misorientation axes) similar to those reported for neighbor-switching processes during grain-boundary sliding. Comparison of subgrain sizes in the porphyroclasts to published grain-size differential-stress relationships indicates that stresses and strain rates were substantially higher in relatively thin parts of the shear zone. The primary microstructural response to higher stresses and strain rates was an increase in the amount of recrystallization to produce aggregates that deformed by grain-boundary sliding. However, even after the development of interconnected networks of recrystallized grains, dislocation creep by subgrain-rotation recrystallization continued to occur within porphyroclasts. This behavior suggests that the bulk rheology of shear zones undergoing thinning and thickening can be controlled by concomitant grain-size insensitive and grain-size sensitive mechanisms. Overall, our observations show that shear zone thickness variations at constant P-T can result in highly variable stresses and strain rates, which in turn modifies microstructure, deformation mechanism and shear zone rheology.

Effects of two-step homogenization on precipitation behavior of Al{sub 3}Zr dispersoids and recrystallization resistance in 7150 aluminum alloy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Zhanying; Key Laboratory for Anisotropy and Texture of Materials, Northeastern University, Shenyang 110819, China,; Zhao, Gang

2015-04-15

The effect of two-step homogenization treatments on the precipitation behavior of Al{sub 3}Zr dispersoids was investigated by transmission electron microscopy (TEM) in 7150 alloys. Two-step treatments with the first step in the temperature range of 300–400 °C followed by the second step at 470 °C were applied during homogenization. Compared with the conventional one-step homogenization, both a finer particle size and a higher number density of Al{sub 3}Zr dispersoids were obtained with two-step homogenization treatments. The most effective dispersoid distribution was attained using the first step held at 300 °C. In addition, the two-step homogenization minimized the precipitate free zonesmore » and greatly increased the number density of dispersoids near dendrite grain boundaries. The effect of two-step homogenization on recrystallization resistance of 7150 alloys with different Zr contents was quantitatively analyzed using the electron backscattered diffraction (EBSD) technique. It was found that the improved dispersoid distribution through the two-step treatment can effectively inhibit the recrystallization process during the post-deformation annealing for 7150 alloys containing 0.04–0.09 wt.% Zr, resulting in a remarkable reduction of the volume fraction and grain size of recrystallization grains. - Highlights: • Effect of two-step homogenization on Al{sub 3}Zr dispersoids was investigated by TEM. • Finer and higher number of dispersoids obtained with two-step homogenization • Minimized the precipitate free zones and improved the dispersoid distribution • Recrystallization resistance with varying Zr content was quantified by EBSD. • Effectively inhibit the recrystallization through two-step treatments in 7150 alloy.« less

Dissolution enhancement of gliclazide using pH change approach in presence of twelve stabilizers with various physico-chemical properties.

PubMed

Talari, Roya; Varshosaz, Jaleh; Mostafavi, Seyed Abolfazl; Nokhodchi, Ali

2009-01-01

The micronization using milling process to enhance dissolution rate is extremely inefficient due to a high energy input, and disruptions in the crystal lattice which can cause physical or chemical instability. Therefore, the aim of the present study is to use in situ micronization process through pH change method to produce micron-size gliclazide particles for fast dissolution hence better bioavailability. Gliclazide was recrystallized in presence of 12 different stabilizers and the effects of each stabilizer on micromeritic behaviors, morphology of microcrystals, dissolution rate and solid state of recrystallized drug particles were investigated. The results showed that recrystallized samples showed faster dissolution rate than untreated gliclazide particles and the fastest dissolution rate was observed for the samples recrystallized in presence of PEG 1500. Some of the recrystallized drug samples in presence of stabilizers dissolved 100% within the first 5 min showing at least 10 times greater dissolution rate than the dissolution rate of untreated gliclazide powders. Micromeritic studies showed that in situ micronization technique via pH change method is able to produce smaller particle size with a high surface area. The results also showed that the type of stabilizer had significant impact on morphology of recrystallized drug particles. The untreated gliclazide is rod or rectangular shape, whereas the crystals produced in presence of stabilizers, depending on the type of stabilizer, were very fine particles with irregular, cubic, rectangular, granular and spherical/modular shape. The results showed that crystallization of gliclazide in presence of stabilizers reduced the crystallinity of the samples as confirmed by XRPD and DSC results. In situ micronization of gliclazide through pH change method can successfully be used to produce micron-sized drug particles to enhance dissolution rate.

Predicting the Kinetics of Ice Recrystallization in Aqueous Sugar Solutions

PubMed Central

2018-01-01

The quality of stored frozen products such as foods and biomaterials generally degrades in time due to the growth of large ice crystals by recrystallization. While there is ample experimental evidence that recrystallization within such products (or model systems thereof) is often dominated by diffusion-limited Ostwald ripening, the application of Ostwald-ripening theories to predict measured recrystallization rates has only met with limited success. For a model system of polycrystalline ice within an aqueous solution of sugars, we here show recrystallization rates can be predicted on the basis of Ostwald ripening theory, provided (1) the theory accounts for the fact the solution can be nonideal, nondilute and of different density than the crystals, (2) the effect of ice-phase volume fraction on the diffusional flux of water between crystals is accurately described, and (3) all relevant material properties (involving binary Fick diffusion coefficients, the thermodynamic factor of the solution, and the surface energy of ice) are carefully estimated. To enable calculation of material properties, we derive an alternative formulation of Ostwald ripening in terms of the Maxwell–Stefan instead of the Fick approach to diffusion. First, this leads to a cancellation of the thermodynamic factor (a measure for the nonideality of a solution), which is a notoriously difficult property to obtain. Second, we show that Maxwell–Stefan diffusion coefficients can to a reasonable approximation be related to self-diffusion coefficients, which are relatively easy to measure or predict in comparison to Fick diffusion coefficients. Our approach is validated for a binary system of water and sucrose, for which we show predicted recrystallization rates of ice compare well to experimental results, with relative deviations of at most a factor of 2. PMID:29651228

Predicting the Kinetics of Ice Recrystallization in Aqueous Sugar Solutions.

PubMed

van Westen, Thijs; Groot, Robert D

2018-04-04

The quality of stored frozen products such as foods and biomaterials generally degrades in time due to the growth of large ice crystals by recrystallization. While there is ample experimental evidence that recrystallization within such products (or model systems thereof) is often dominated by diffusion-limited Ostwald ripening, the application of Ostwald-ripening theories to predict measured recrystallization rates has only met with limited success. For a model system of polycrystalline ice within an aqueous solution of sugars, we here show recrystallization rates can be predicted on the basis of Ostwald ripening theory, provided (1) the theory accounts for the fact the solution can be nonideal, nondilute and of different density than the crystals, (2) the effect of ice-phase volume fraction on the diffusional flux of water between crystals is accurately described, and (3) all relevant material properties (involving binary Fick diffusion coefficients, the thermodynamic factor of the solution, and the surface energy of ice) are carefully estimated. To enable calculation of material properties, we derive an alternative formulation of Ostwald ripening in terms of the Maxwell-Stefan instead of the Fick approach to diffusion. First, this leads to a cancellation of the thermodynamic factor (a measure for the nonideality of a solution), which is a notoriously difficult property to obtain. Second, we show that Maxwell-Stefan diffusion coefficients can to a reasonable approximation be related to self-diffusion coefficients, which are relatively easy to measure or predict in comparison to Fick diffusion coefficients. Our approach is validated for a binary system of water and sucrose, for which we show predicted recrystallization rates of ice compare well to experimental results, with relative deviations of at most a factor of 2.

The Ajo Mining District, Pima County, Arizona--Evidence for Middle Cenozoic Detachment Faulting, Plutonism, Volcanism, and Hydrothermal Alteration

USGS Publications Warehouse

Cox, Dennis P.; Force, Eric R.; Wilkinson, William H.; More, Syver W.; Rivera, John S.; Wooden, Joseph L.

2006-01-01

Introduction: The Ajo porphyry copper deposit and surrounding Upper Cretaceous rocks have been separated from their plutonic source and rotated by detachment faulting. Overlying middle Cenozoic sedimentary and volcanic rocks have been tilted and show evidence for two periods of rotation. Following these rotations, a granitic stock (23.7?0.2 Ma) intruded basement rocks west of the Ajo deposit. This stock was uplifted 2.5 km to expose deep-seated Na-Ca alteration.

Validation of Innovative Exploration Technologies for Newberry Volcano: Drill Site Location Map 2010

DOE Data Explorer

Jaffe, Todd

2012-01-01

Newberry seeks to explore "blind" (no surface evidence) convective hydrothermal systems associated with a young silicic pluton on the flanks of Newberry Volcano. This project will employ a combination of innovative and conventional techniques to identify the location of subsurface geothermal fluids associated with the hot pluton. Newberry project drill site location map 2010. Once the exploration mythology is validated, it can be applied throughout the Cascade Range and elsewhere to locate and develop “blind” geothermal resources.

Metadynamic and static recrystallization softening behavior of a bainite steel

NASA Astrophysics Data System (ADS)

Li, Lixin; Zheng, Liangyu; Ye, Ben; Tong, Zeqiong

2018-01-01

The metadynamic recrystallization (MDRX) and static recrystallization (SRX) softening behavior of a bainite steel was investigated by two-pass isothermal compression experiments at temperatures of 1173, 1273, 1373, and 1473 K and strain rates of 0.01, 0.1, 1, and 10 s-1 with inter-pass times of 1, 5, 10, and 30 s on a Gleeble-1500 thermo-mechanical simulator. Kinetic equations were developed to evaluate the softening fractions caused by MDRX and SRX. A comparison between the experimental and predicted softening fractions showed that the proposed kinetic equations can provide a precise estimation of the MDRX and SRX behavior of the studied steel. The results based on the kinetic equations indicated that the MDRX and SRX softening fraction increases with the increase in strain rate, deformation temperature, inter-pass time, and pre-strain; the activation energy of MDRX is much smaller than that of SRX; and the no-recrystallization temperature of the investigated steel is 1179.4 K.

Fabric and texture at Siple Dome, Antarctica

USGS Publications Warehouse

Diprinzio, C.L.; Wilen, Lawrence A.; Alley, R.B.; Fitzpatrick, J.J.; Spencer, M.K.; Gow, A.J.

2005-01-01

Preferred c-axis orientations are present in the firn at Siple Dome, West Antarctica, and recrystallization begins as shallow as 200 m depth in ice below -20??C, based on digital analysis of c-axis fabrics, grain-sizes and other characteristics of 52 vertical thin sections prepared in the field from the kilometer-long Siple Dome ice core. The shallowest section analyzed, from 22 m, shows clustering of c axes toward the vertical. By 200 m depth, girdle fabric and other features of recrystallized ice are evident in layers (or regions), separated by layers (regions) of typically finer-grained ice lacking evidence of recrystallization. Ice from about 700-780 m depth, which was deposited during the last ice age, is especially fine-grained, with strongly vertical c axes, but deeper ice shows much larger crystals and strong evidence of recrystallization. Azimuthal asymmetry of some c-axis fabrics, trends in grain-size, and other indicators reveal additional information on processes and history of ice flow at Siple Dome.

Effect of Thermomechanical Processing on Texture and Superelasticity in Fe-Ni-Co-Al-Ti-B Alloy

NASA Astrophysics Data System (ADS)

Lee, Doyup; Omori, Toshihiro; Han, Kwangsik; Hayakawa, Yasuyuki; Kainuma, Ryosuke

2018-03-01

The texture and superelasticity were investigated in austenitic Fe-Ni-Co-Al-Ti-B alloy with various reduction ratios of cold rolling and heating ratios in annealing. The rolled sheets show the {110} <112> deformation texture at a reduction ratio higher than 80%, while the texture hardly changes in the primary recrystallization at 1000 °C. The β (B2) precipitates inhibit the grain growth at this temperature, but they dissolve during heating, and secondary recrystallization occurs due to decreased pinning force at temperatures higher than 1100 °C, resulting in texture change to {210} <001> . The recrystallization texture is more strongly developed when the reduction ratio and heating rate are high and slow, respectively. The 90% cold-rolled and slowly heated sheet shows the recrystallization texture and high fraction of low-angle boundaries. As a result, ductility and superelasticity can be drastically improved in the 90% cold-rolled sheet, although superelasticity was previously obtained only in thin sheets with 98.5% reduction.

A study of the oxide dispersion and recrystallization in NiCrAl prepared from preoxidized powder

NASA Technical Reports Server (NTRS)

Glasgow, T. K.

1975-01-01

The sintered aluminum powder (SAP) technique of dispersion strengthening (formation of an oxide dispersion by preoxidation of metal powders) was applied to atomized powder of a nickel alloy containing, by weight, 17% Cr, 5% Al, and 0.2% Y. The SAP-NiCrAl alloy (without the ytterbium removed by oxdation) was worked by extrusion and rod rolling at 1205 C and by swaging at 760 C. Annealing treatments were applied after working to determine the recrystallization response. The NiCrAlY alloy, similarly prepared from atomized powder, but without a preoxidation treatment, was examined for comparison. The SAP-NiCrAl alloy exhibited oxide particle size and spacing much larger than that usually observed in oxide dispersion strengthened alloys; nonetheless, it was possible to achieve abnormal (secondary) recrystallization in the SAP-NiCrAl alloy as has been reported for other oxide dispersion strengthened alloys. In contrast, the unoxidized NiCrAlY alloy exhibited only primary recrystallization.

Modeling Deformation Flow Curves and Dynamic Recrystallization of BA-160 Steel During Hot Compression

NASA Astrophysics Data System (ADS)

Shahriari, Babak; Vafaei, Reza; Mohammad Sharifi, Ehsan; Farmanesh, Khosro

2018-03-01

The hot deformation behavior of a high strength low carbon steel was investigated using hot compression test at the temperature range of 850-1100 °C and under strain rates varying from 0.001 to 1 s-1. It was found that the flow curves of the steel were typical of dynamic recrystallization at the temperature of 950 °C and above; at tested strain rates lower than 1 s-1. A very good correlation between the flow stress and Zener-Hollomon parameter was obtained using a hyperbolic sine function. The activation energy of deformation was found to be around 390 kJ mol-1. The kinetics of dynamic recrystallization of the steel was studied by comparing it with a hypothetical dynamic recovery curve, and the dynamically fraction recrystallized was modeled by the Kolmogorov-Johnson-Mehl-Avrami relation. The Avrami exponent was approximately constant around 1.8, which suggested that the type of nucleation was one of site saturation on grain boundaries and edges.

Effects of Laves phase particles on recovery and recrystallization behaviors of Nb-containing FeCrAl alloys

DOE PAGES

Sun, Zhiqian; Edmondson, Philip D.; Yamamoto, Yukinori

2017-11-15

The microstructures and mechanical properties of deformed and annealed Nb-containing FeCrAl alloys were investigated. Fine dispersion of Fe 2Nb-type Laves phase particles was observed in the bcc-Fe matrix after applying a thermomechanical treatment, especially along grain/subgrain boundaries, which effectively stabilized the recovered and recrystallized microstructures compared with the Nb-free FeCrAl alloy. The stability of recovered areas increased with Nb content up to 1 wt%. The recrystallized grain structure in Nb-containing FeCrAl alloys consisted of elongated grains along the rolling direction with a weak texture when annealed below 1100 °C. An abnormal relationship between recrystallized grain size and annealing temperature wasmore » found. Microstructural inhomogeneity in the deformed and annealed states was explained based on the Taylor factor. Annealed Nb-containing FeCrAl alloys showed a good combination of strength and ductility, which is desirable for their application as fuel cladding in light-water reactors.« less