A Sneak Preview of the E-ELT Design Reference Science Plan Questionnaire Results

NASA Astrophysics Data System (ADS)

Kissler-Patig, M.; Küpcü Yoldaş, A.; Liske, J.

2009-12-01

The European Extremely Large Telescope is in its detailed design phase until the end of 2010. During this period, the telescope design is being consolidated and instrument and operation concepts are being studied. The scientific users are feeding back requirements into the project in numerous ways. One of them, the Design Reference Science Plan, was an opportunity for the entire community to provide direct feedback to the project. Here, we summarise the first results from this study. The full report will appear in the first half of 2010.

Reference and Information Services: An Introduction. Third Edition. Library and Information Science Text Series.

ERIC Educational Resources Information Center

Bopp, Richard E., Ed.; Smith, Linda C., Ed.

Like the first two editions, this third edition is designed primarily to provide the beginning student of library and information science with an overview both of the concepts and processes behind today's reference services and of the most important sources consulted in answering common types of reference questions. The first 12 chapters deal with…

Developing Coherent Conceptual Storylines: Two Elementary Challenges

ERIC Educational Resources Information Center

Hanuscin, Deborah; Lipsitz, Kelsey; Cisterna-Alburquerque, Dante; Arnone, Kathryn A.; van Garderen, Delinda; de Araujo, Zandra; Lee, Eun Ju

2016-01-01

The "conceptual storyline" of a lesson refers to the flow and sequencing of learning activities such that science concepts align and progress in ways that are instructionally meaningful to student learning of the concepts. Research demonstrates that when teachers apply lesson design strategies to create a coherent science content…

Advancing Your Career: Concepts of Professional Nursing. Second Edition.

ERIC Educational Resources Information Center

Kearney, Rose

This textbook, intended for registered nurses (RN's) returning to school, is designed to provide practicing RN's with professional concepts to advance their careers. The book contains 22 chapters organized in five sections. Each chapter includes chapter objectives, key terms, key points, chapter exercises, references, and a bibliography. Section I…

Health Concepts, Guides for Health Instruction.

ERIC Educational Resources Information Center

American Association for Health, Physical Education, and Recreation, Washington, DC.

Concepts and supporting data pertaining to major health problems facing youth today as well as those anticipated in the next decade are enumerated in this resource. The material is designed as a reference for curriculum planners and classroom teachers in developing curriculum and teaching guides, units and instruction, and other curriculum…

Design concept for the microwave interrogation structure in PARCS

NASA Technical Reports Server (NTRS)

Dick, G. J.; Klipstein, W. M.; Heavner, T. P.; Jefferts, S. R.

2002-01-01

In this paper we will describe key aspects of the conceptual design of the microwave interrogation structure in the laser-cooled cesium frequency standard that is part of the Primary Atomic Reference Clock in Space (PARCS) experiment.

Concepts of a Higher Hierarchical Level Require More Dual Situated Learning Events for Conceptual Change: A Study of Air Pressure and Buoyancy.

ERIC Educational Resources Information Center

She, Hsiao-Ching

2002-01-01

Examines the process of students' conceptual changes with regard to air pressure and buoyancy as a result of teaching with the dual situated learning model. Uses a model designed according to the students' ontological viewpoint on science concepts as well as the nature of these concepts. (Contains 40 references.) (Author/YDS)

Networking for Teacher Learning: Toward a Theory of Effective Design.

ERIC Educational Resources Information Center

McDonald, Joseph P.; Klein, Emily J.

2003-01-01

Examines how teacher networks design for teacher learning, describing several dynamic tensions inherent in the designs of a sample of teacher networks and assessing the relationships of these tensions to teacher learning. The paper illustrates these design concepts with reference to the work of seven networks that aim to revamp teacher' knowledge…

An Earth-Moon System Trajectory Design Reference Catalog

NASA Technical Reports Server (NTRS)

Folta, David; Bosanac, Natasha; Guzzetti, Davide; Howell, Kathleen C.

2014-01-01

As demonstrated by ongoing concept designs and the recent ARTEMIS mission, there is, currently, significant interest in exploiting three-body dynamics in the design of trajectories for both robotic and human missions within the Earth-Moon system. The concept of an interactive and 'dynamic' catalog of potential solutions in the Earth-Moon system is explored within this paper and analyzed as a framework to guide trajectory design. Characterizing and compiling periodic and quasi-periodic solutions that exist in the circular restricted three-body problem may offer faster and more efficient strategies for orbit design, while also delivering innovative mission design parameters for further examination.

Ares V Overview and Status

NASA Technical Reports Server (NTRS)

Creech, Steve; Sumrall, Phil; Cockrell, Charles E., Jr.; Burris, Mike

2009-01-01

As part of NASA s Constellation Program to resume exploration beyond low Earth orbit (LEO), the Ares V heavy-lift cargo launch vehicle as currently conceived will be able to send more crew and cargo to more places on the Moon than the Apollo Program Saturn V. (Figure 1) It also has unprecedented cargo mass and volume capabilities that will be a national asset for science, commerce, and national defense applications. Compared to current systems, it will offer approximately five times the mass and volume to most orbits and locations. The Columbia space shuttle accident, the resulting investigation, the Vision for Space Exploration, and the Exploration Systems Architecture Study (ESAS) broadly shaped the Constellation architecture. Out of those events and initiatives emerged an architecture intended to replace the space shuttle, complete the International Space Station (ISS), resume a much more ambitious plan to explore the moon as a stepping stone to other destinations in the solar system. The Ares I was NASA s main priority because of the goal to retire the Shuttle. Ares V remains in a concept development phase, evolving through hundreds of configurations. The current reference design was approved during the Lunar Capabilities Concept Review/Ares V Mission Concept Review (LCCR/MCR) in June 2008. This reference concept serves as a starting point for a renewed set of design trades and detailed analysis into its interaction with the other components of the Constellation architecture and existing launch infrastructure. In 2009, the Ares V team was heavily involved in supporting the Review of U.S. Human Space Flight Plans Committee. Several alternative designs for Ares V have been supplied to the committee. This paper will discuss the origins of the Ares V design, the evolution to the current reference configuration, and the options provided to the review committee.

Modular disposable can (MODCAN) crash cushion: A concept investigation

NASA Technical Reports Server (NTRS)

Knoell, A.; Wilson, A.

1976-01-01

A conceptual design investigation of an improved highway crash cushion system is presented. The system is referred to as a modular disposable can (MODCAN) crash system. It is composed of a modular arrangement of disposable metal beverage cans configured to serve as an effective highway impact attenuation system. Experimental data, design considerations, and engineering calculations supporting the design development are presented. Design performance is compared to that of a conventional steel drum system. It is shown that the MODCAN concepts offers the potential for smoother and safer occupant deceleration for a larger class of vehicle impact weights than the steel drum device.

Structural analysis of three space crane articulated-truss joint concepts

NASA Technical Reports Server (NTRS)

Wu, K. Chauncey; Sutter, Thomas R.

1992-01-01

Three space crane articulated truss joint concepts are studied to evaluate their static structural performance over a range of geometric design parameters. Emphasis is placed on maintaining the four longeron reference truss performance across the joint while allowing large angle articulation. A maximum positive articulation angle and the actuator length ratio required to reach the angle are computed for each concept as the design parameters are varied. Configurations with a maximum articulation angle less than 120 degrees or actuators requiring a length ratio over two are not considered. Tip rotation and lateral deflection of a truss beam with an articulated truss joint at the midspan are used to select a point design for each concept. Deflections for one point design are up to 40 percent higher than for the other two designs. Dynamic performance of the three point design is computed as a function of joint articulation angle. The two lowest frequencies of each point design are relatively insensitive to large variations in joint articulation angle. One point design has a higher maximum tip velocity for the emergency stop than the other designs.

Design and Analysis of a Formation Flying System for the Cross-Scale Mission Concept

NASA Technical Reports Server (NTRS)

Cornara, Stefania; Bastante, Juan C.; Jubineau, Franck

2007-01-01

The ESA-funded "Cross-Scale Technology Reference Study has been carried out with the primary aim to identify and analyse a mission concept for the investigation of fundamental space plasma processes that involve dynamical non-linear coupling across multiple length scales. To fulfill this scientific mission goal, a constellation of spacecraft is required, flying in loose formations around the Earth and sampling three characteristic plasma scale distances simultaneously, with at least two satellites per scale: electron kinetic (10 km), ion kinetic (100-2000 km), magnetospheric fluid (3000-15000 km). The key Cross-Scale mission drivers identified are the number of S/C, the space segment configuration, the reference orbit design, the transfer and deployment strategy, the inter-satellite localization and synchronization process and the mission operations. This paper presents a comprehensive overview of the mission design and analysis for the Cross-Scale concept and outlines a technically feasible mission architecture for a multi-dimensional investigation of space plasma phenomena. The main effort has been devoted to apply a thorough mission-level trade-off approach and to accomplish an exhaustive analysis, so as to allow the characterization of a wide range of mission requirements and design solutions.

POSITION AND MOTION, A SCIENCE UNIT FOR THE UPPER ELEMENTARY GRADES, STUDENT MANUAL.

ERIC Educational Resources Information Center

BERGER, CARL; MONTGOMERY, MARSHALL

THIS MANUAL IS DESIGNED FOR STUDENTS IN UPPER ELEMENTARY GRADES STUDYING THE SCIENCE CURRICULUM IMPROVEMENT STUDY (SCIS) UNIT "POSITION AND MOTION". THE OVERALL STRUCTURE OF THE UNIT FOLLOWS A CYCLE OF PRELIMINARY EXPLORATION, INVENTION OF SPECIFIC CONCEPTS RELATED TO REFERENCE FRAMES, AND DISCOVERY OF THE USEFULNESS OF THE CONCEPT.…

Definition of a 5MW/61.5m wind turbine blade reference model.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Resor, Brian Ray

2013-04-01

A basic structural concept of the blade design that is associated with the frequently utilized %E2%80%9CNREL offshore 5-MW baseline wind turbine%E2%80%9D is needed for studies involving blade structural design and blade structural design tools. The blade structural design documented in this report represents a concept that meets basic design criteria set forth by IEC standards for the onshore turbine. The design documented in this report is not a fully vetted blade design which is ready for manufacture. The intent of the structural concept described by this report is to provide a good starting point for more detailed and targeted investigationsmore » such as blade design optimization, blade design tool verification, blade materials and structures investigations, and blade design standards evaluation. This report documents the information used to create the current model as well as the analyses used to verify that the blade structural performance meets reasonable blade design criteria.« less

Generic repository design concepts and thermal analysis (FY11).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Howard, Robert; Dupont, Mark; Blink, James A.

2011-08-01

Reference concepts for geologic disposal of used nuclear fuel and high-level radioactive waste in the U.S. are developed, including geologic settings and engineered barriers. Repository thermal analysis is demonstrated for a range of waste types from projected future, advanced nuclear fuel cycles. The results show significant differences among geologic media considered (clay/shale, crystalline rock, salt), and also that waste package size and waste loading must be limited to meet targeted maximum temperature values. In this study, the UFD R&D Campaign has developed a set of reference geologic disposal concepts for a range of waste types that could potentially be generatedmore » in advanced nuclear FCs. A disposal concept consists of three components: waste inventory, geologic setting, and concept of operations. Mature repository concepts have been developed in other countries for disposal of spent LWR fuel and HLW from reprocessing UNF, and these serve as starting points for developing this set. Additional design details and EBS concepts will be considered as the reference disposal concepts evolve. The waste inventory considered in this study includes: (1) direct disposal of SNF from the LWR fleet, including Gen III+ advanced LWRs being developed through the Nuclear Power 2010 Program, operating in a once-through cycle; (2) waste generated from reprocessing of LWR UOX UNF to recover U and Pu, and subsequent direct disposal of used Pu-MOX fuel (also used in LWRs) in a modified-open cycle; and (3) waste generated by continuous recycling of metal fuel from fast reactors operating in a TRU burner configuration, with additional TRU material input supplied from reprocessing of LWR UOX fuel. The geologic setting provides the natural barriers, and establishes the boundary conditions for performance of engineered barriers. The composition and physical properties of the host medium dictate design and construction approaches, and determine hydrologic and thermal responses of the disposal system. Clay/shale, salt, and crystalline rock media are selected as the basis for reference mined geologic disposal concepts in this study, consistent with advanced international repository programs, and previous investigations in the U.S. The U.S. pursued deep geologic disposal programs in crystalline rock, shale, salt, and volcanic rock in the years leading up to the Nuclear Waste Policy Act, or NWPA (Rechard et al. 2011). The 1987 NWPA amendment act focused the U.S. program on unsaturated, volcanic rock at the Yucca Mountain site, culminating in the 2008 license application. Additional work on unsaturated, crystalline rock settings (e.g., volcanic tuff) is not required to support this generic study. Reference disposal concepts are selected for the media listed above and for deep borehole disposal, drawing from recent work in the U.S. and internationally. The main features of the repository concepts are discussed in Section 4.5 and summarized in Table ES-1. Temperature histories at the waste package surface and a specified distance into the host rock are calculated for combinations of waste types and reference disposal concepts, specifying waste package emplacement modes. Target maximum waste package surface temperatures are identified, enabling a sensitivity study to inform the tradeoff between the quantity of waste per disposal package, and decay storage duration, with respect to peak temperature at the waste package surface. For surface storage duration on the order of 100 years or less, waste package sizes for direct disposal of SNF are effectively limited to 4-PWR configurations (or equivalent size and output). Thermal results are summarized, along with recommendations for follow-on work including adding additional reference concepts, verification and uncertainty analysis for thermal calculations, developing descriptions of surface facilities and other system details, and cost estimation to support system-level evaluations.« less

Jovian system science issues and implications for a Mariner Jupiter Orbiter mission

NASA Technical Reports Server (NTRS)

Beckman, J. C.; Miner, E. D.

1975-01-01

Science goals for missions to Jupiter in the early 1980's are reviewed and a case is made for the science community to play the key role in assigning relative priorities for these goals. A reference set of measurement requirements and their priorities is established and those high priority goals that are most demanding on spacecraft and mission design are used to develop a reference mission concept. An orbiter mission is required to satisfy a majority of the measurements, and a spacecraft data handling capability as least equivalent to the Mariner Jupiter/Saturn spacecraft is the major system design driver. This reference Mission Concept is called Mariner Jupiter Orbiter. The remaining measurement requirements are reviewed in light of the potential science return of this mission, and certain options are developed to augment this science return. Two attractive options fulfill high priority objectives not achieved by the reference Mariner Jupiter Orbiter mission alone: an atmospheric entry probe, released prior to orbit insertion; and a daughter satellite dedicated to particle and fields measurements, ejected into an independent orbit about Jupiter.

Survey and documentation of emerging technologies for the Satellite Power System (SPS)

NASA Technical Reports Server (NTRS)

Glaser, P.; Chapman, P.

1981-01-01

The genesis of the solar power satellite (SPS) concept is reviewed historically and the original assumptions and guidelines which led to development of the SPS reference system design concept are discussed. Some guidelines are applicable to almost any SPS design, but others can be changed, leading to new and perhaps preferable systems. In order to stimulate new SPS concepts and to facilitate comparative assessment of emerging SPS technologies, one useful approach is to break the overall system into functional parts. The system functions which must be performed by any SPS concept and the interrelations between them are discussed and a systematic framework is presented for assessing the wide variety of system concepts and subsystem technologies which have been proposed. About 80 alternative SPS technologies are reviewed.

14 CFR 1240.102 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Contributions Board. (d) Commercial quality refers to computer software that is not in an experimental or beta..., engineering or scientific concept, idea, design, process, or product, reported as new technology on NASA Form...) Invention includes any act, method, process, machine, manufacture, design, or composition of matter, or any...

14 CFR 1240.102 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Contributions Board. (d) Commercial quality refers to computer software that is not in an experimental or beta..., engineering or scientific concept, idea, design, process, or product, reported as new technology on NASA Form...) Invention includes any act, method, process, machine, manufacture, design, or composition of matter, or any...

Multimedia as Rhizome: Design Issues in a Network Environment.

ERIC Educational Resources Information Center

Burnett, Kathleen

1992-01-01

Defines the concepts of hypertext, hypermedia, multimedia, and multimedia networks. Using the rhizome as a metaphor for electronically mediated exchange, a theory of hypermedia design that incorporates principles of connection and heterogeneity, multiplicity, asignifying rupture, and cartography and decalomania is explored. (four references) (MES)

Design Reference Missions for Deep-Space Optical Communication

NASA Astrophysics Data System (ADS)

Breidenthal, J.; Abraham, D.

2016-05-01

We examined the potential, but uncertain, NASA mission portfolio out to a time horizon of 20 years, to identify mission concepts that potentially could benefit from optical communication, considering their communications needs, the environments in which they would operate, and their notional size, weight, and power constraints. A set of 12 design reference missions was selected to represent the full range of potential missions. These design reference missions span the space of potential customer requirements, and encompass the wide range of applications that an optical ground segment might eventually be called upon to serve. The design reference missions encompass a range of orbit types, terminal sizes, and positions in the solar system that reveal the chief system performance variables of an optical ground segment, and may be used to enable assessments of the ability of alternative systems to meet various types of customer needs.

Satellite power systems (SPS) concept definition study. Volume 2, part 1: System engineering

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1980-01-01

Top level trade studies are presented, including comparison of solid state and klystron concepts, higher concentration on the solar cells, composite and aluminum structure, and several variations to the reference concept. Detailed trade studies are presented in each of the subsystem areas (solar array, power distribution, structures, thermal control, attitude control and stationkeeping, microwave transmission, and ground receiving station). A description of the selected point design is also presented.

Human Exploration of Mars Design Reference Architecture 5.0

NASA Technical Reports Server (NTRS)

Drake, Bret G.

2010-01-01

This paper provides a summary of the Mars Design Reference Architecture 5.0 (DRA 5.0), which is the latest in a series of NASA Mars reference missions. It provides a vision of one potential approach to human Mars exploration. The reference architecture provides a common framework for future planning of systems concepts, technology development, and operational testing as well as Mars robotic missions, research that is conducted on the International Space Station, and future lunar exploration missions. This summary the Mars DRA 5.0 provides an overview of the overall mission approach, surface strategy and exploration goals, as well as the key systems and challenges for the first three human missions to Mars.

Satellite power system concept development and evaluation program system definition technical assessment report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-12-01

The results of the system definition studies conducted by NASA as a part of the Department of Energy/National Aeronautics and Space Administration SPS Concept Development and Evaluation Program are summarized. The purpose of the system definition efforts was to identify and define candidate SPS concepts and to evaluate the concepts in terms of technical and cost factors. Although the system definition efforts consisted primarily of evaluation and assessment of alternative technical approaches, a reference system was also defined to facilitate economic, environmental, and societal assessments by the Department of Energy. This reference system was designed to deliver 5 GW ofmore » electrical power to the utility grid. Topics covered include system definition; energy conversion and power management; power transmission and reception; structures, controls, and materials; construction and operations; and space transportation.« less

Origins Space Telescope: Science Case and Design Reference Mission for Concept 1

NASA Astrophysics Data System (ADS)

Meixner, Margaret; Cooray, Asantha; Pope, Alexandra; Armus, Lee; Vieira, Joaquin Daniel; Milam, Stefanie N.; Melnick, Gary; Leisawitz, David; Staguhn, Johannes G.; Bergin, Edwin; Origins Space Telescope Science and Technology Definition Team

2018-01-01

The Origins Space Telescope (OST) is the mission concept for the Far-Infrared Surveyor, one of the four science and technology definition studies of NASA Headquarters for the 2020 Astronomy and Astrophysics Decadal survey. The science case for OST covers four themes: Tracing the Signature of Life and the Ingredients of Habitable Worlds; Charting the Rise of Metals, Dust and the First Galaxies, Unraveling the Co-evolution of Black Holes and Galaxies and Understanding Our Solar System in the Context of Planetary System Formation. Using a set of proposed observing programs from the community, we estimate a design reference mission for OST mission concept 1. The mission will complete significant programs in these four themes and have time for other programs from the community. Origins will enable flagship-quality general observing programs led by the astronomical community in the 2030s. We welcome you to contact the Science and Technology Definition Team (STDT) with your science needs and ideas by emailing us at ost_info@lists.ipac.caltech.edu.

Resource Conservation and Recovery Act, Part B Permit Application [for the Waste Isolation Pilot Plant (WIPP)]. Volume 5, Chapter D, Appendix D1 (conclusion), Revision 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, Neville G.W.; Heuze, Francois E.; Miller, Hamish D.S.

1993-03-01

The reference design for the underground facilities at the Waste Isolation Pilot Plant was developed using the best criteria available at initiation of the detailed design effort. These design criteria are contained in the US Department of Energy document titled Design Criteria, Waste Isolation Pilot Plant (WIPP). Revised Mission Concept-IIA (RMC-IIA), Rev. 4, dated February 1984. The validation process described in the Design Validation Final Report has resulted in validation of the reference design of the underground openings based on these criteria. Future changes may necessitate modification of the Design Criteria document and/or the reference design. Validation of the referencemore » design as presented in this report permits the consideration of future design or design criteria modifications necessitated by these changes or by experience gained at the WIPP. Any future modifications to the design criteria and/or the reference design will be governed by a DOE Standard Operation Procedure (SOP) covering underground design changes. This procedure will explain the process to be followed in describing, evaluating and approving the change.« less

14 CFR 1240.102 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Contributions Board. (d) Commercial quality refers to computer software that is not in an experimental or beta..., engineering or scientific concept, idea, design, process, or product. (h) Innovator means any person listed as..., machine, manufacture, design, or composition of matter, or any new and useful improvement thereof, or any...

The Crossbyton project

NASA Technical Reports Server (NTRS)

Reichert, J. D.

1980-01-01

The Analog Design Verification System (ADVS), the largest single solar collector built, was tested. Referred to as the Solar Gridiron or Bowl Concept, it employs a stationary mirror, with tracking accomplished by the mirror.

Key Resources on Higher Education Governance, Management, and Leadership. A Guide to the Literature.

ERIC Educational Resources Information Center

Peterson, Marvin W., Ed.; Mets, Lisa A., Ed.

Designed as a reference for both practitioners and scholars, this book describes the general development of governance, management, and leadership in higher education, and also outlines the evolution of particular issues, concepts, and literature within each of these three areas. Each bibliographic entry is numbered to provide cross-references to…

Optimization of Actuating Origami Networks

NASA Astrophysics Data System (ADS)

Buskohl, Philip; Fuchi, Kazuko; Bazzan, Giorgio; Joo, James; Gregory, Reich; Vaia, Richard

2015-03-01

Origami structures morph between 2D and 3D conformations along predetermined fold lines that efficiently program the form, function and mobility of the structure. By leveraging design concepts from action origami, a subset of origami art focused on kinematic mechanisms, reversible folding patterns for applications such as solar array packaging, tunable antennae, and deployable sensing platforms may be designed. However, the enormity of the design space and the need to identify the requisite actuation forces within the structure places a severe limitation on design strategies based on intuition and geometry alone. The present work proposes a topology optimization method, using truss and frame element analysis, to distribute foldline mechanical properties within a reference crease pattern. Known actuating patterns are placed within a reference grid and the optimizer adjusts the fold stiffness of the network to optimally connect them. Design objectives may include a target motion, stress level, or mechanical energy distribution. Results include the validation of known action origami structures and their optimal connectivity within a larger network. This design suite offers an important step toward systematic incorporation of origami design concepts into new, novel and reconfigurable engineering devices. This research is supported under the Air Force Office of Scientific Research (AFOSR) funding, LRIR 13RQ02COR.

Crew appliance study

NASA Technical Reports Server (NTRS)

Proctor, B. W.; Reysa, R. P.; Russell, D. J.

1975-01-01

Viable crew appliance concepts were identified by means of a thorough literature search. Studies were made of the food management, personal hygiene, housekeeping, and off-duty habitability functions to determine which concepts best satisfy the Space Shuttle Orbiter and Modular Space Station mission requirements. Models of selected appliance concepts not currently included in the generalized environmental-thermal control and life support systems computer program were developed and validated. Development plans of selected concepts were generated for future reference. A shuttle freezer conceptual design was developed and a test support activity was provided for regenerative environmental control life support subsystems.

General Systems Theory and Instructional Systems Design.

ERIC Educational Resources Information Center

Salisbury, David F.

1990-01-01

Describes basic concepts in the field of general systems theory (GST) and identifies commonalities that exist between GST and instructional systems design (ISD). Models and diagrams that depict system elements in ISD are presented, and two matrices that show how GST has been used in ISD literature are included. (11 references) (LRW)

Arts Education Facilities Planner for Grades K-8.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh.

This reference document for public school facility designers addresses arts education programs and the facilities that support them. Some sections focus on concepts and features common to most or all arts education subject areas, such as sound management, acoustical design, teacher workstations, and performance facilities. Other sections describe…

The Chemistry Teaching Program for Developing the Senior High School Students' Entrepreneurial Attitudes

ERIC Educational Resources Information Center

Susianna, Nancy

2011-01-01

The objectives of this research were to identify the characteristics and effectiveness of chemistry teaching programs that increase students' entrepreneurial attitudes, chemistry concepts understanding and creativity. The research design application refers to the R & D (Research and Development) Design. Seventy-three senior high school students…

A reference model for model-based design of critical infrastructure protection systems

NASA Astrophysics Data System (ADS)

Shin, Young Don; Park, Cheol Young; Lee, Jae-Chon

2015-05-01

Today's war field environment is getting versatile as the activities of unconventional wars such as terrorist attacks and cyber-attacks have noticeably increased lately. The damage caused by such unconventional wars has also turned out to be serious particularly if targets are critical infrastructures that are constructed in support of banking and finance, transportation, power, information and communication, government, and so on. The critical infrastructures are usually interconnected to each other and thus are very vulnerable to attack. As such, to ensure the security of critical infrastructures is very important and thus the concept of critical infrastructure protection (CIP) has come. The program to realize the CIP at national level becomes the form of statute in each country. On the other hand, it is also needed to protect each individual critical infrastructure. The objective of this paper is to study on an effort to do so, which can be called the CIP system (CIPS). There could be a variety of ways to design CIPS's. Instead of considering the design of each individual CIPS, a reference model-based approach is taken in this paper. The reference model represents the design of all the CIPS's that have many design elements in common. In addition, the development of the reference model is also carried out using a variety of model diagrams. The modeling language used therein is the systems modeling language (SysML), which was developed and is managed by Object Management Group (OMG) and a de facto standard. Using SysML, the structure and operational concept of the reference model are designed to fulfil the goal of CIPS's, resulting in the block definition and activity diagrams. As a case study, the operational scenario of the nuclear power plant while being attacked by terrorists is studied using the reference model. The effectiveness of the results is also analyzed using multiple analysis models. It is thus expected that the approach taken here has some merits over the traditional design methodology of repeating requirements analysis and system design.

3S (Safeguards, Security, Safety) based pyroprocessing facility safety evaluation plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ku, J.H.; Choung, W.M.; You, G.S.

The big advantage of pyroprocessing for the management of spent fuels against the conventional reprocessing technologies lies in its proliferation resistance since the pure plutonium cannot be separated from the spent fuel. The extracted materials can be directly used as metal fuel in a fast reactor, and pyroprocessing reduces drastically the volume and heat load of the spent fuel. KAERI has implemented the SBD (Safeguards-By-Design) concept in nuclear fuel cycle facilities. The goal of SBD is to integrate international safeguards into the entire facility design process since the very beginning of the design phase. This paper presents a safety evaluationmore » plan using a conceptual design of a reference pyroprocessing facility, in which 3S (Safeguards, Security, Safety)-By-Design (3SBD) concept is integrated from early conceptual design phase. The purpose of this paper is to establish an advanced pyroprocessing hot cell facility design concept based on 3SBD for the successful realization of pyroprocessing technology with enhanced safety and proliferation resistance.« less

Study of the Army Helicopter Design Hover Criterion Using Temperature and Pressure Altitude

DTIC Science & Technology

2017-09-01

the Advanced Scout Helicopter Special Study Group reexamined the design point requirement. They recommended increasing the design point pressure...other combinations group between these two extremes. Ultimately, the design point for a helicopter has to be determined by the user of the...helicopter designs . 6. References Aviation Agency. 1972. “Heavy Lift Helicopter (HLH) Concept Formulation Study (U)”, Action Control Number 2958

Satellite power system concept development and evaluation program. Volume 2: System definition

NASA Technical Reports Server (NTRS)

1981-01-01

The system level results of the system definition studies performed by NASA as a part of the Department of Energy/NASA satellite power system concept development and evaluation program are summarized. System requirements and guidelines are discussed as well as the major elements that comprise the reference system and its design options. Alternative system approaches including different system sizes, solid state amplifier (microwave) concepts, and laser power transmission system cost summaries are reviewed. An overview of the system analysis and planning efforts is included. The overall study led to the conclusion that the reference satellite power system concept is a feasible baseload source of electrical power and, within the assumed guidelines, the minimum cost per kilowatt is achieved at the maximum output of 5 gigawatts to the utility grid. Major unresolved technical issues include maximum allowable microwave power density in the ionosphere and performance/mass characteristics of laser power transmission systems.

Teleology and teleonomy in behavior analysis

PubMed Central

Reese, Hayne W.

1994-01-01

Teleological descriptions and explanations refer to purpose as consequent to a phenomenon. They become nonteleological if purpose is represented as antecedent to the phenomenon. Such nonteleological statements are called teleonomic, especially when they refer to antecedent genetic “programs.” In behavior analysis, purpose is attributed to the organism's history of consequences. Such a history may leave a trace—physiological (mechanism) or mental (cognitivism)—or the issue of traces may be irrelevant (contextualism). The history or trace is antecedent to current responding, and thus is not a teleological concept in the classical sense. It could be called a teleonomic concept, but this designation is undesirable if it implies exclusively genetic programming, because the history or trace is genetically programmed in evolutionary selection but not in ontogenetic selection. Therefore, the concepts of teleology and teleonomy are not useful for behavior analysis, and invoking them can be misleading. The concept of purpose can be useful if it is not reified. PMID:22478174

ATLAS, an integrated structural analysis and design system. Volume 6: Design module theory

NASA Technical Reports Server (NTRS)

Backman, B. F.

1979-01-01

The automated design theory underlying the operation of the ATLAS Design Module is decribed. The methods, applications and limitations associated with the fully stressed design, the thermal fully stressed design and a regional optimization algorithm are presented. A discussion of the convergence characteristics of the fully stressed design is also included. Derivations and concepts specific to the ATLAS design theory are shown, while conventional terminology and established methods are identified by references.

Human Exploration of Mars Design Reference Architecture 5.0

NASA Technical Reports Server (NTRS)

Drake, Bret G.; Hoffman, Stephen J.; Beaty, David W.

2009-01-01

This paper provides a summary of the 2007 Mars Design Reference Architecture 5.0 (DRA 5.0), which is the latest in a series of NASA Mars reference missions. It provides a vision of one potential approach to human Mars exploration including how Constellation systems can be used. The reference architecture provides a common framework for future planning of systems concepts, technology development, and operational testing as well as Mars robotic missions, research that is conducted on the International Space Station, and future lunar exploration missions. This summary the Mars DRA 5.0 provides an overview of the overall mission approach, surface strategy and exploration goals, as well as the key systems and challenges for the first three human missions to Mars.

The Ariane Transfer Vehicle (ATV) system studies

NASA Astrophysics Data System (ADS)

Thomas, U.; Thirkettle, A.

1991-08-01

Two distinct concepts of the Ariane transfer vehicle (ATV) are compared which incorporate existing ATV technology and offer logistics delivery at competitive costs. One concept is based on the Ariane-5 upper stage and the Vehicle Equipment Bay, and the other does not include Ariane-5 functions so that existing upper-stage limitations can be eliminated. Both concepts are required to accomplish the same transport, rendezvous, and berthing maneuvers and allow for controlled destructive reentry. An ATV reference mission is outlined, and key ATV design drivers are listed which include safety requirements, debris protection, and propulsion criteria. The Ariane-5 upgrade is the most cost-effective design although the second design is more operationally efficient. The ATV can potentially be used to relieve the schedule of the shuttle flights required for building the Space Station Freedom.

Evolution of Analog Circuits on Field Programmable Transistor Arrays

NASA Technical Reports Server (NTRS)

Stoica, A.; Keymeulen, D.; Zebulum, R.; Thakoor, A.; Daud, T.; Klimeck, G.; Jin, Y.; Tawel, R.; Duong, V.

2000-01-01

Evolvable Hardware (EHW) refers to HW design and self-reconfiguration using evolutionary/genetic mechanisms. The paper presents an overview of some key concepts of EHW, describing also a set of selected applications.

Design sensitivity analysis of nonlinear structural response

NASA Technical Reports Server (NTRS)

Cardoso, J. B.; Arora, J. S.

1987-01-01

A unified theory is described of design sensitivity analysis of linear and nonlinear structures for shape, nonshape and material selection problems. The concepts of reference volume and adjoint structure are used to develop the unified viewpoint. A general formula for design sensitivity analysis is derived. Simple analytical linear and nonlinear examples are used to interpret various terms of the formula and demonstrate its use.

A head-up display for low-visibility approach and landing

NASA Technical Reports Server (NTRS)

Bray, R. S.; Scott, B. C.

1981-01-01

An electronic flight-guidance display format was designed for use in evaluations of the collimated head-up display concept in low-visibility landings of transport aircraft. In the design process of iterative evaluation and modification, some general principles, or guidelines, applicable to such flight displays were suggested. The usefulness of an indication of instantaneous inertial flightpath was clearly demonstrated, particularly in low-altitude transition to visual references. Evaluator pilot acceptance of the unfamiliar display concepts was very positive when careful attention was given to indoctrination and training.

The role of local terminologies in electronic health records. The HEGP experience.

PubMed

Daniel-Le Bozec, Christel; Steichen, Olivier; Dart, Thierry; Jaulent, Marie-Christine

2007-01-01

Despite decades of work, there is no universally accepted standard medical terminology and no generally usable terminological tools have yet emerged. The local dictionary of concepts of the Georges Pompidou European Hospital (HEGP) is a Terminological System (TS) designed to support clinical data entry. It covers 93 data entry forms and contains definitions and synonyms of more than 5000 concepts, sometimes linked to reference terminologies such as ICD-10. In this article, we evaluate to which extend SNOMED CT could fully replace or rather be mapped to the local terminology system. We first describe the local dictionary of concepts of HEGP according to some published TS characterization framework. Then we discuss the specific role that a local terminology system plays with regards to reference terminologies.

Study of unconventional aircraft engines designed for low energy consumption

NASA Technical Reports Server (NTRS)

Neitzel, R. E.; Hirschkron, R.; Johnston, R. P.

1976-01-01

A study of unconventional engine cycle concepts, which may offer significantly lower energy consumption than conventional subsonic transport turbofans, is described herein. A number of unconventional engine concepts were identified and parametrically studied to determine their relative fuel-saving potential. Based on results from these studies, regenerative, geared, and variable-boost turbofans, and combinations thereof, were selected along with advanced turboprop cycles for further evaluation and refinement. Preliminary aerodynamic and mechanical designs of these unconventional engine configurations were conducted and mission performance was compared to a conventional, direct-drive turofan reference engine. Consideration is given to the unconventional concepts, and their state of readiness for application. Areas of needed technology advancement are identified.

The flight telerobotic servicer Tinman concept: System design drivers and task analysis

NASA Technical Reports Server (NTRS)

Andary, J. F.; Hewitt, D. R.; Hinkal, S. W.

1989-01-01

A study was conducted to develop a preliminary definition of the Flight Telerobotic Servicer (FTS) that could be used to understand the operational concepts and scenarios for the FTS. Called the Tinman, this design concept was also used to begin the process of establishing resources and interfaces for the FTS on Space Station Freedom, the National Space Transportation System shuttle orbiter, and the Orbital Maneuvering vehicle. Starting with an analysis of the requirements and task capabilities as stated in the Phase B study requirements document, the study identified eight major design drivers for the FTS. Each of these design drivers and their impacts on the Tinman design concept are described. Next, the planning that is currently underway for providing resources for the FTS on Space Station Freedom is discussed, including up to 2000 W of peak power, up to four color video channels, and command and data rates up to 500 kbps between the telerobot and the control station. Finally, an example is presented to show how the Tinman design concept was used to analyze task scenarios and explore the operational capabilities of the FTS. A structured methodology using a standard terminology consistent with the NASA/National Bureau of Standards Standard Reference Model for Telerobot Control System Architecture (NASREM) was developed for this analysis.

A CURRICULUM DESIGN FOR DISADVANTAGED COMMUNITY JUNIOR COLLEGE STUDENTS.

ERIC Educational Resources Information Center

CLARKE, JOHNNIE RUTH

THE JUNIOR COLLEGE MUST DEVELOP A CURRICULUM DESIGNED TO MEET THE IDENTIFIABLE EDUCATIONAL NEEDS OF THE DISADVANTAGED STUDENT, WITH SPECIFIC REFERENCE TO THE EFFECTS OF DEPRIVATION ON ASPIRATIONS, VALUES, MOTIVATION, AND SELF-CONCEPT AND TO THE INFLUENCE OF CLASS OR CASTE ON ACADEMIC PROGRESS. THIS STUDENT NEEDS TO DEVELOP (1) POSITIVE FEELINGS OF…

WEBSLIDE: A "Virtual" Slide Projector Based on World Wide Web.

ERIC Educational Resources Information Center

Barra, Maria; Ferrandino, Salvatore; Scarano, Vittorio

1999-01-01

Presents the key design concepts of a software project whose objective is to provide a simple, cheap, and efficient solution for showing slides during lessons in computer labs. Contains 26 references. (DDR)

A Didactic Proposed for Teaching the Concepts of Electrons and Light in Secondary School Using Feynman's Path Sum Method

ERIC Educational Resources Information Center

Fanaro, Maria de los Angeles; Arlego, Marcelo; Otero, Maria Rita

2012-01-01

This work comprises an investigation about basic Quantum Mechanics (QM) teaching in the high school. The organization of the concepts does not follow a historical line. The Path Integrals method of Feynman has been adopted as a Reference Conceptual Structure that is an alternative to the canonical formalism. We have designed a didactic sequence…

Pre-Service Physics Teachers’ Concept Mastery and the Challenges of Game Development on Physics Learning

NASA Astrophysics Data System (ADS)

Saprudin, S.; Liliasari, L.; Prihatmanto, A. S.

2017-09-01

This study is a survey that aims to describe pre-service physics teachers’ concept mastery at a university in Ternate. Data were collected through test standard instrument for physics which used in the teacher certification program. Data were analyzed by using quantitative descriptive technique. Based on the results of data analysis, it was concluded that generally pre-service physics teachers’ concept mastery can be categorized on low category (25.4%). The map of concept mastery will be used as a reference to developing game design in the physics learning context for pre-service physics teachers.

Function, form, and technology - The evolution of Space Station in NASA

NASA Technical Reports Server (NTRS)

Fries, S. D.

1985-01-01

The history of major Space Station designs over the last twenty-five years is reviewed. The evolution of design concepts is analyzed with respect to the changing functions of Space Stations; and available or anticipated technology capabilities. Emphasis is given to the current NASA Space Station reference configuration, the 'power tower'. Detailed schematic drawings of the different Space Station designs are provided.

Optical Design Trade Study for the Wide Field Infrared Survey Telescope [WFIRST

NASA Technical Reports Server (NTRS)

Content, David A.; Goullioud, R.; Lehan, John P.; Mentzell, John E.

2011-01-01

The Wide Field Infrared Survey Telescope (WFIRST) mission concept was ranked first in new space astrophysics mission by the Astro2010 Decadal Survey incorporating the Joint Dark Energy Mission (JDEM)-Omega payload concept and multiple science white papers. This mission is based on a space telescope at L2 studying exoplanets [via gravitational microlensing], probing dark energy, and surveying the near infrared sky. Since the release of NWNH, the WFIRST project has been working with the WFIRST science definition team (SDT) to refine mission and payload concepts. We present the driving requirements. The current interim reference mission point design, based on the use of a 1.3m unobscured aperture three mirror anastigmat form, with focal imaging and slitless spectroscopy science channels, is consistent with the requirements, requires no technology development, and out performs the JDEM-Omega design.

Initial conceptual design study of self-critical nuclear pumped laser systems

NASA Technical Reports Server (NTRS)

Rodgers, R. J.

1979-01-01

An analytical study of self-critical nuclear pumped laser system concepts was performed. Primary emphasis was placed on reactor concepts employing gaseous uranium hexafluoride (UF6) as the fissionable material. Relationships were developed between the key reactor design parameters including reactor power level, critical mass, neutron flux level, reactor size, operating pressure, and UF6 optical properties. The results were used to select a reference conceptual laser system configuration. In the reference configuration, the 3.2 m cubed lasing volume is surrounded by a graphite internal moderator and a region of heavy water. Results of neutronics calculations yield a critical mass of 4.9 U(235) in the form (235)UF6. The configuration appears capable of operating in a continuous steady-state mode. The average gas temperature in the core is 600 K and the UF6 partial pressure within the lasing volume is 0.34 atm.

Reference Reactor Module for the Affordable Fission Surface Power System

NASA Astrophysics Data System (ADS)

Poston, David I.; Kapernick, Richard J.; Dixon, David D.; Amiri, Benjamin W.; Marcille, Thomas F.

2008-01-01

Surface fission power systems on the Moon and Mars may provide the first US application of fission reactor technology in space since 1965. The requirements of many surface power applications allow the consideration of systems with much less development risk than most other space reactor applications, because of modest power (10s of kWe) and no driving need for minimal mass (allowing temperatures <1000 K). The Affordable Fission Surface Power System (AFSPS) study was completed by NASA/DOE to determine the cost of a modest performance, low-technical risk surface power system. This paper describes the reference AFSPS reactor module concept, which is designed to provide a net power of 40 kWe for 8 years on the lunar surface; note, the system has been designed with technologies that are fully compatible with a Martian surface application. The reactor concept uses stainless-steel based, UO2-fueled, liquid metal-cooled fission reactor coupled to free-piston Stirling converters. The reactor shielding approach utilizes both in-situ and launched shielding to keep the dose to astronauts much lower than the natural background radiation on the lunar surface. One of the important ``affordability'' attributes is that the concept has been designed to minimize both the technical and programmatic safety risk.

The Teacher as Instructional Designer: A Search Through the Curriculum Maze.

ERIC Educational Resources Information Center

Jacko, Carol M.; Garman, Noreen M.

The vast amount of literature on curriculum and instructional design does not establish a clear frame of reference to help teachers utilize and operationalize concepts and information. Four specific problem areas are of special concern in the literature: (1) the terminology and definitions are confusing; (2) the place of the classroom teacher is…

A MEMS hardness sensor with reduced contact force dependence based on the reference plane concept aimed for medical applications

NASA Astrophysics Data System (ADS)

Maeda, Yusaku; Terao, Kyohei; Shimokawa, Fusao; Takao, Hidekuni

2016-04-01

In this study, the stable detection principle of a MEMS hardness sensor with “reference plane” structure is theoretically analyzed and demonstrated with experimental results. Hardness measurement independent of contact force instability is realized by the optimum design of the reference plane. The fabricated devices were evaluated, and a “shore A” hardness scale (JIS K 6301 A) was obtained as the reference in the range from A1 to A54 under a stable contact force. The contact force dependence on hardness sensor signals was effectively reduced by 96.6% using our reference plane design. Below 5 N contact force, the maximal signal error of hardness is suppressed to A8. This result corresponds to the detection capability for fat hardness, even when the contact force is unstable. Through experiments, stable detection of human body hardness has been demonstrated without any control of contact force.

Humans to Mars: Fifty Years of Mission Planning, 1950-2000

NASA Technical Reports Server (NTRS)

Portree, David S. F.

2001-01-01

Contents of this document include: On the Grand Scale; Earliest NASA Concepts; EMPIRE and After; A Hostile Environment; Apogee; Viking and the Resources of Mars; The Case for Mars; Challengers; Space Exploration Initiative; and Design Reference Mission.

Lander Propulsion Overview and Technology Requirements Discussion

NASA Technical Reports Server (NTRS)

Brown, Thomas M.

2007-01-01

This viewgraph presentation reviews the lunar lander propulsion requirements. It includes discussion on: Lander Project Overview, Project Evolution/Design Cycles, Lunar Architecture & Lander Reference Missions, Lander Concept Configurations, Descent and Ascent propulsion reviews, and a review of the technology requirements.

Lunar in-core thermionic nuclear reactor power system conceptual design

NASA Technical Reports Server (NTRS)

Mason, Lee S.; Schmitz, Paul C.; Gallup, Donald R.

1991-01-01

This paper presents a conceptual design of a lunar in-core thermionic reactor power system. The concept consists of a thermionic reactor located in a lunar excavation with surface mounted waste heat radiators. The system was integrated with a proposed lunar base concept representative of recent NASA Space Exploration Initiative studies. The reference mission is a permanently-inhabited lunar base requiring a 550 kWe, 7 year life central power station. Performance parameters and assumptions were based on the Thermionic Fuel Element (TFE) Verification Program. Five design cases were analyzed ranging from conservative to advanced. The cases were selected to provide sensitivity effects on the achievement of TFE program goals.

The Role of Design-of-Experiments in Managing Flow in Compact Air Vehicle Inlets

NASA Technical Reports Server (NTRS)

Anderson, Bernhard H.; Miller, Daniel N.; Gridley, Marvin C.; Agrell, Johan

2003-01-01

It is the purpose of this study to demonstrate the viability and economy of Design-of-Experiments methodologies to arrive at microscale secondary flow control array designs that maintain optimal inlet performance over a wide range of the mission variables and to explore how these statistical methods provide a better understanding of the management of flow in compact air vehicle inlets. These statistical design concepts were used to investigate the robustness properties of low unit strength micro-effector arrays. Low unit strength micro-effectors are micro-vanes set at very low angles-of-incidence with very long chord lengths. They were designed to influence the near wall inlet flow over an extended streamwise distance, and their advantage lies in low total pressure loss and high effectiveness in managing engine face distortion. The term robustness is used in this paper in the same sense as it is used in the industrial problem solving community. It refers to minimizing the effects of the hard-to-control factors that influence the development of a product or process. In Robustness Engineering, the effects of the hard-to-control factors are often called noise , and the hard-to-control factors themselves are referred to as the environmental variables or sometimes as the Taguchi noise variables. Hence Robust Optimization refers to minimizing the effects of the environmental or noise variables on the development (design) of a product or process. In the management of flow in compact inlets, the environmental or noise variables can be identified with the mission variables. Therefore this paper formulates a statistical design methodology that minimizes the impact of variations in the mission variables on inlet performance and demonstrates that these statistical design concepts can lead to simpler inlet flow management systems.

CisLunar Habitat Internal Architecture Design Criteria

NASA Technical Reports Server (NTRS)

Jones, R.; Kennedy, K.; Howard, R.; Whitmore, M.; Martin, C.; Garate, J.

2017-01-01

BACKGROUND: In preparation for human exploration to Mars, there is a need to define the development and test program that will validate deep space operations and systems. In that context, a Proving Grounds CisLunar habitat spacecraft is being defined as the next step towards this goal. This spacecraft will operate differently from the ISS or other spacecraft in human history. The performance envelope of this spacecraft (mass, volume, power, specifications, etc.) is being defined by the Future Capabilities Study Team. This team has recognized the need for a human-centered approach for the internal architecture of this spacecraft and has commissioned a CisLunar Phase-1 Habitat Internal Architecture Study Team to develop a NASA reference configuration, providing the Agency with a "smart buyer" approach for future acquisition. THE CISLUNAR HABITAT INTERNAL ARCHITECTURE STUDY: Overall, the CisLunar Habitat Internal Architecture study will address the most significant questions and risks in the current CisLunar architecture, habitation, and operations concept development. This effort is achieved through definition of design criteria, evaluation criteria and process, design of the CisLunar Habitat Phase-1 internal architecture, and the development and fabrication of internal architecture concepts combined with rigorous and methodical Human-in-the-Loop (HITL) evaluations and testing of the conceptual innovations in a controlled test environment. The vision of the CisLunar Habitat Internal Architecture Study is to design, build, and test a CisLunar Phase-1 Habitat Internal Architecture that will be used for habitation (e.g. habitability and human factors) evaluations. The evaluations will mature CisLunar habitat evaluation tools, guidelines, and standards, and will interface with other projects such as the Advanced Exploration Systems (AES) Program integrated Power, Avionics, Software (iPAS), and Logistics for integrated human-in-the-loop testing. The mission of the CisLunar Habitat Internal Architecture Study is to become a forcing function to establish a common understanding of CisLunar Phase-1 Habitation Internal Architecture design criteria, processes, and tools. The scope of the CisLunar Habitat Internal Architecture study is to design, develop, demonstrate, and evaluate a Phase-1 CisLunar Habitat common module internal architecture based on design criteria agreed to by NASA, the International Partners, and Commercial Exploration teams. This task is to define the CisLunar Phase-1 Internal Architecture Government Reference Design, assist NASA in becoming a "smart buyer" for Phase-1 Habitat Concepts, and ultimately to derive standards and requirements from the Internal Architecture Design Process. The first step was to define a Habitat Internal Architecture Design Criteria and create a structured philosophy to be used by design teams as a filter by which critical aspects of consideration would be identified for the purpose of organizing and utilizing interior spaces. With design criteria in place, the team will develop a series of iterative internal architecture concept designs which will be assessed by means of an evaluation criteria and process. These assessments will successively drive and refine the design, leading to the combination and down-selection of design concepts. A single refined reference design configuration will be developed into in a medium-to-high fidelity mockup. A multi-day human-in-the-loop mission test will fully evaluate the reference design and validate its configuration. Lessons learned from the design and evaluation will enable the team to identify appropriate standards for Phase-1 CisLunar Habitat Internal Architecture and will enable NASA to develop derived requirements in support of maturing CisLunar Habitation capabilities. This paper will describe the criteria definition process, workshop event, and resulting CisLunar Phase-1 Habitat Internal Architecture Design Criteria.

Advanced Low-Emissions Catalytic-Combustor Program, phase 1. [aircraft gas turbine engines

NASA Technical Reports Server (NTRS)

Sturgess, G. J.

1981-01-01

Six catalytic combustor concepts were defined, analyzed, and evaluated. Major design considerations included low emissions, performance, safety, durability, installations, operations and development. On the basis of these considerations the two most promising concepts were selected. Refined analysis and preliminary design work was conducted on these two concepts. The selected concepts were required to fit within the combustor chamber dimensions of the reference engine. This is achieved by using a dump diffuser discharging into a plenum chamber between the compressor discharge and the turbine inlet, with the combustors overlaying the prediffuser and the rear of the compressor. To enhance maintainability, the outer combustor case for each concept is designed to translate forward for accessibility to the catalytic reactor, liners and high pressure turbine area. The catalytic reactor is self-contained with air-cooled canning on a resilient mounting. Both selected concepts employed integrated engine-starting approaches to raise the catalytic reactor up to operating conditions. Advanced liner schemes are used to minimize required cooling air. The two selected concepts respectively employ fuel-rich initial thermal reaction followed by rapid quench and subsequent fuel-lean catalytic reaction of carbon monoxide, and, fuel-lean thermal reaction of some fuel in a continuously operating pilot combustor with fuel-lean catalytic reaction of remaining fuel in a radially-staged main combustor.

Design and development of pressure and repressurization purge system for reusable space shuttle multilayer insulation system

NASA Technical Reports Server (NTRS)

1971-01-01

Preliminary design and analysis of purge system concepts and purge subsystem approaches are defined and evaluated. Acceptable purge subsystem approaches were combined into four predesign layouts which are presented for comparison and evaluation. Two predesigns were selected for further detailed design and evaluation for eventual selection of the best design for a full scale test configuration. An operation plan is included as an appendix for reference to shuttle-oriented operational parameters.

The Multi-Sector Sustainability Browser (MSSB): A Tool for ...

EPA Pesticide Factsheets

The MSSB is the first and only decision support tool containing information from scientific literature and technical reports that can be used to develop and implement sustainability initiatives. The MSSB is designed to assist individuals and communities in understanding the impacts that the four key dimensions of sustainability - Land Use, Buildings and Infrastructure, Transportation, and Materials Management - can have on human health, the economy, the built environment and natural environments. The MSSB has the following capabilities: a. Displays and describes linkages between the four major sustainability concepts (Land Use, Buildings and Infrastructure, Transportation, and Materials Management) and their subordinate concepts. b. Displays and lists literature sources and references (including weblinks where applicable) providing information about each major sustainability concept and its associated subordinate concepts. c. Displays and lists quantitative data related to each major sustainability concept and its associated subordinate concepts, with weblinks where applicable.The MSSB serves as a ‘visual database’, allowing users to: investigate one or more of the four key sustainability dimensions; explore available scientific literature references, and; assess potential impacts of sustainability activities. The MSSB reduces the amount of time and effort required to assess the state of sustainability science and engineering research pertaining

Course Syllabus: Christianity in a Technological Society.

ERIC Educational Resources Information Center

Kaiser, Christopher

1984-01-01

Explains a course designed to develop student skills to rethink the concept of ministry in a culture dominated by technological structures. An assignment involving national and local news events is described. Also presents lecture topics, guidelines for class discussions, and references. (DH)

Nuclear design of a very-low-activation fusion reactor

NASA Astrophysics Data System (ADS)

Cheng, E. T.; Hopkins, G. R.

1983-06-01

The nuclear design aspects of using very-low-activation materials, such as SiC, MgO, and aluminum for fusion-reactor first wall, blanket, and shield applications were investigated. In addition to the advantage of very-low radioactive inventory, it was found that the very-low-activation fusion reactor can also offer an adequate tritium-breeding ratio and substantial amount of blanket nuclear heating as a conventional-material-structured reactor does. The most-stringent design constraint found in a very-low-activation fusion reactor is the limited space available in the inboard region of a Tokamak concept for shielding to protect the superconducting toroidal field coil. A reference design was developed which mitigates the constraint by adopting a removable tungsten shield design that retains the inboard dimensions and gives the same shield performance as the reference STARFIRE Tokamak reactor design.

A ground based phase control system for the solar power satellite. Executive summary, volume 1, phase 3

NASA Technical Reports Server (NTRS)

Chie, C. M.

1980-01-01

The Solar Power Satellite (SPS) concept and the reference phase control system investigated in earlier efforts are reviewed. A summary overview of the analysis and selection of the pilot signal and power transponder design is presented along with the SOLARSIM program development and the simulated SPS phase control performance. Evaluations of the ground based phase control system as an alternate phase control concept are summarized.

Integrating Nursing Diagnostic Concepts into the Medical Entities Dictionary Using the ISO Reference Terminology Model for Nursing Diagnosis

PubMed Central

Hwang, Jee-In; Cimino, James J.; Bakken, Suzanne

2003-01-01

Objective: The purposes of the study were (1) to evaluate the usefulness of the International Standards Organization (ISO) Reference Terminology Model for Nursing Diagnoses as a terminology model for defining nursing diagnostic concepts in the Medical Entities Dictionary (MED) and (2) to create the additional hierarchical structures required for integration of nursing diagnostic concepts into the MED. Design and Measurements: The authors dissected nursing diagnostic terms from two source terminologies (Home Health Care Classification and the Omaha System) into the semantic categories of the ISO model. Consistent with the ISO model, they selected Focus and Judgment as required semantic categories for creating intensional definitions of nursing diagnostic concepts in the MED. Because the MED does not include Focus and Judgment hierarchies, the authors developed them to define the nursing diagnostic concepts. Results: The ISO model was sufficient for dissecting the source terminologies into atomic terms. The authors identified 162 unique focus concepts from the 266 nursing diagnosis terms for inclusion in the Focus hierarchy. For the Judgment hierarchy, the authors precoordinated Judgment and Potentiality instead of using Potentiality as a qualifier of Judgment as in the ISO model. Impairment and Alteration were the most frequently occurring judgments. Conclusions: Nursing care represents a large proportion of health care activities; thus, it is vital that terms used by nurses are integrated into concept-oriented terminologies that provide broad coverage for the domain of health care. This study supports the utility of the ISO Reference Terminology Model for Nursing Diagnoses as a facilitator for the integration process. PMID:12668692

Categorization and modeling of information work for H-journal design.

PubMed Central

Sundaram, A.

1996-01-01

This paper reports on a doctoral research project that examined the work of reference librarians in the health sciences domain. Categories of information work are derived and used to build Hyper-MedLib, a proof-of-concept h-journal. Findings from this study may be used in the design of electronic documents and information systems for the practice environments. PMID:8947690

Investigation of Wind Turbine Rotor Concepts for Offshore Wind Farms

NASA Astrophysics Data System (ADS)

Ceyhan, Özlem; Grasso, Francesco

2014-06-01

Current plans in offshore wind energy developments call for further reduction of cost of energy. In order to contribute to this goal, several wind turbine rotor concepts have been investigated. Assuming the future offshore wind turbines will operate only in the offshore wind farms, the rotor concepts are not only evaluated for their stand-alone performances and their potential in reducing the loads, but also for their performance in an offshore wind farm. In order to do that, the 10MW reference wind turbine designed in Innwind.EU project is chosen as baseline. Several rotor parameters have been modified and their influences are investigated for offshore wind turbine design purposes. This investigation is carried out as a conceptual parametrical study. All concepts are evaluated numerically with BOT (Blade optimisation tool) software in wind turbine level and with Farmflow software in wind farm level for two wind farm layouts. At the end, all these concepts are compared with each other in terms of their advantages and disadvantages.

Investigating the influence of achievement on self-concept using an intra-class design and a comparison of the PASS and SDQ-1 self-concept tests.

PubMed

Hay, I; Ashman, A; van Kraayenoord, C E

1997-09-01

The formation and measurement of self-concept were the foci of this research. The study aimed to investigate the influence of achievement on academic self-concept and to compare the Perception of Ability Scale for Students (PASS, Boersma & Chapman, 1992) with the Self-Description Questionnaire-1 (SDQ-1, Marsh, 1988). The participants were 479 grade 5 (mean age 126.6 months) coeducational Australian students, located in 18 schools. An intra-class research design was used to investigate the influence of frame-of-reference on self-concept development. As students' academic scores rose above their class mean their self-concepts increased and as students' academic scores fell below their class mean their self-concepts decreased. Students' difference from class mean predicted their self-concept scores. This finding was consistently shown across the reading, spelling, and mathematics domains using test and teaching rating data. A comparison between the PASS and the SDQ-1 demonstrated concurrent validity across self-concept domains. The findings support the notions that the social environment is a significant agent that influences self-concept, and that teacher ratings and standardised tests of achievement and the PASS and the SDQ-1 are valid measures for self-concept research.

Effect of ball geometry on endurance limit in bending of drilled balls

NASA Technical Reports Server (NTRS)

Munson, H. E.

1975-01-01

Four designs of drilled (cylindrically hollow) balls were tested for resistance to bending fatigue. Bending fatigue has been demonstrated to be a limiting factor in previous evaluations of the drilled ball concept. A web reinforced drilled ball was most successful in resisting bending fatigue. Another design of through drilled design, involving a heavier wall than the standard reference ball, also showed significant improvement in resistance to bending fatigue.

Evolution of Orion Mission Design for Exploration Mission 1 and 2

NASA Technical Reports Server (NTRS)

Gutkowski, Jeffrey P.; Dawn, Timothy F.; Jedrey, Richard M.

2016-01-01

The evolving mission design and concepts of NASA’s next steps have shaped Orion into the spacecraft that it is today. Since the initial inception of Orion, through the Constellation Program, and now in the Exploration Mission frame-work with the Space Launch System (SLS), each mission design concept and pro-gram goal have left Orion with a set of capabilities that can be utilized in many different mission types. Exploration Missions 1 and 2 (EM-1 and EM-2) have now been at the forefront of the mission design focus for the last several years. During that time, different Design Reference Missions (DRMs) were built, analyzed, and modified to solve or mitigate enterprise level design trades to ensure a viable mission from launch to landing. The resulting DRMs for EM-1 and EM-2 were then expanded into multi-year trajectory scans to characterize vehicle performance as affected by variations in Earth-Moon geometry. This provides Orion’s subsystems with stressing reference trajectories to help design their system. Now that Orion has progressed through the Preliminary and Critical Design Reviews (PDR and CDR), there is a general shift in the focus of mission design from aiding the vehicle design to providing mission specific products needed for pre-flight and real time operations. Some of the mission specific products needed include, large quantities of nominal trajectories for multiple monthly launch periods and abort options at any point in the mission for each valid trajectory in the launch window.

Precision Pointing Control System (PPCS) system design and analysis. [for gimbaled experiment platforms

NASA Technical Reports Server (NTRS)

Frew, A. M.; Eisenhut, D. F.; Farrenkopf, R. L.; Gates, R. F.; Iwens, R. P.; Kirby, D. K.; Mann, R. J.; Spencer, D. J.; Tsou, H. S.; Zaremba, J. G.

1972-01-01

The precision pointing control system (PPCS) is an integrated system for precision attitude determination and orientation of gimbaled experiment platforms. The PPCS concept configures the system to perform orientation of up to six independent gimbaled experiment platforms to design goal accuracy of 0.001 degrees, and to operate in conjunction with a three-axis stabilized earth-oriented spacecraft in orbits ranging from low altitude (200-2500 n.m., sun synchronous) to 24 hour geosynchronous, with a design goal life of 3 to 5 years. The system comprises two complementary functions: (1) attitude determination where the attitude of a defined set of body-fixed reference axes is determined relative to a known set of reference axes fixed in inertial space; and (2) pointing control where gimbal orientation is controlled, open-loop (without use of payload error/feedback) with respect to a defined set of body-fixed reference axes to produce pointing to a desired target.

Conceptual Design and Structural Optimization of NASA Environmentally Responsible Aviation (ERA) Hybrid Wing Body Aircraft

NASA Technical Reports Server (NTRS)

Quinlan, Jesse R.; Gern, Frank H.

2016-01-01

Simultaneously achieving the fuel consumption and noise reduction goals set forth by NASA's Environmentally Responsible Aviation (ERA) project requires innovative and unconventional aircraft concepts. In response, advanced hybrid wing body (HWB) aircraft concepts have been proposed and analyzed as a means of meeting these objectives. For the current study, several HWB concepts were analyzed using the Hybrid wing body Conceptual Design and structural optimization (HCDstruct) analysis code. HCDstruct is a medium-fidelity finite element based conceptual design and structural optimization tool developed to fill the critical analysis gap existing between lower order structural sizing approaches and detailed, often finite element based sizing methods for HWB aircraft concepts. Whereas prior versions of the tool used a half-model approach in building the representative finite element model, a full wing-tip-to-wing-tip modeling capability was recently added to HCDstruct, which alleviated the symmetry constraints at the model centerline in place of a free-flying model and allowed for more realistic center body, aft body, and wing loading and trim response. The latest version of HCDstruct was applied to two ERA reference cases, including the Boeing Open Rotor Engine Integration On an HWB (OREIO) concept and the Boeing ERA-0009H1 concept, and results agreed favorably with detailed Boeing design data and related Flight Optimization System (FLOPS) analyses. Following these benchmark cases, HCDstruct was used to size NASA's ERA HWB concepts and to perform a related scaling study.

VIEWCACHE: An incremental pointer-base access method for distributed databases. Part 1: The universal index system design document. Part 2: The universal index system low-level design document. Part 3: User's guide. Part 4: Reference manual. Part 5: UIMS test suite

NASA Technical Reports Server (NTRS)

Kelley, Steve; Roussopoulos, Nick; Sellis, Timos

1992-01-01

The goal of the Universal Index System (UIS), is to provide an easy-to-use and reliable interface to many different kinds of database systems. The impetus for this system was to simplify database index management for users, thus encouraging the use of indexes. As the idea grew into an actual system design, the concept of increasing database performance by facilitating the use of time-saving techniques at the user level became a theme for the project. This Final Report describes the Design, the Implementation of UIS, and its Language Interfaces. It also includes the User's Guide and the Reference Manual.

An Overview of a Trajectory-Based Solution for En Route and Terminal Area Self-Spacing: Third Revision

NASA Technical Reports Server (NTRS)

Abbott, Terence S.

2012-01-01

This paper presents an overview of the third major revision to an algorithm specifically designed to support NASA's Airborne Precision Spacing concept. This algorithm is referred to as the Airborne Spacing for Terminal Arrival Routes version 11 (ASTAR11). This airborne self-spacing concept is trajectory-based, allowing for spacing operations prior to the aircraft being on a common path. Because this algorithm is trajectory-based, it also has the inherent ability to support required time-of-arrival (RTA) operations. This algorithm was also designed specifically to support a standalone, non-integrated implementation in the spacing aircraft.

Implementation of accessible tourism concept at museums in Jakarta

NASA Astrophysics Data System (ADS)

Wiastuti, R. D.; Adiati, M. P.; Lestari, N. S.

2018-03-01

Accessibility, sustainability and equitable participation by all makeup what is known as Tourism for All. Tourism product must be designed for all people despite the age, gender and ability as one of the requirements to comply the accessible tourism concept. Museum as one of the elements of tourism chain must adhere to accessible tourism concept thus able to be enjoyed for everyone regardless of one’s abilities. The aim of this study is to identify the implementation of accessible tourism concept at the museum in Jakarta and to provide practical accessibility- improvement measures for the museum in Jakarta towards accessible tourism concept. This research is qualitative- explorative research. Jakarta Tourism Board website was used as the main reference to obtain which museum that was selected. Primary data collect from direct field observations and interview. The results outline museum implementation of accessible tourism that classified into five criteria; information, transport, common requirements, universal design, and accessibility. The implication of this study provides recommendations to enhance museums’ accessibility performance expected to be in line with accessible tourism concept.

RS-34 (Peacekeeper Post Boost Propulsion System) Orbital Debris Application Concept Study

NASA Technical Reports Server (NTRS)

Esther, Elizabeth A.; Burnside, Christopher G.

2013-01-01

The Advanced Concepts Office (ACO) at the NASA Marshall Space Flight Center (MSFC) lead a study to evaluate the Rocketdyne produced RS-34 propulsion system as it applies to an orbital debris removal design reference mission. The existing RS-34 propulsion system is a remaining asset from the de-commissioned United States Air Force Peacekeeper ICBM program; specifically the pressure-fed storable bi-propellant Stage IV Post Boost Propulsion System. MSFC gained experience with the RS-34 propulsion system on the successful Ares I-X flight test program flown in the Ares I-X Roll control system (RoCS). The heritage hardware proved extremely robust and reliable and sparked interest for further utilization on other potential in-space applications. Subsequently, MSFC is working closely with the USAF to obtain all the remaining RS-34 stages for re-use opportunities. Prior to pursuit of securing the hardware, MSFC commissioned the Advanced Concepts Office to understand the capability and potential applications for the RS-34 Phoenix stage as it benefits NASA, DoD, and commercial industry. Originally designed, the RS-34 Phoenix provided in-space six-degrees-of freedom operational maneuvering to deploy multiple payloads at various orbital locations. The RS-34 Concept Study, preceded by a utilization study to understand how the unique capabilities of the RS-34 Phoenix and its application to six candidate missions, sought to further understand application for an orbital debris design reference mission as the orbital debris removal mission was found to closely mimic the heritage RS-34 mission. The RS-34 Orbital Debris Application Concept Study sought to identify multiple configurations varying the degree of modification to trade for dry mass optimization and propellant load for overall capability and evaluation of several candidate missions. The results of the RS-34 Phoenix Utilization Study show that the system is technically sufficient to successfully support all of the missions analyzed. The results and benefits of the RS-34 Orbital Debris Application Concept Study are presented in this paper.

A satellite-based personal communication system for the 21st century

NASA Technical Reports Server (NTRS)

Sue, Miles K.; Dessouky, Khaled; Levitt, Barry; Rafferty, William

1990-01-01

Interest in personal communications (PCOMM) has been stimulated by recent developments in satellite and terrestrial mobile communications. A personal access satellite system (PASS) concept was developed at the Jet Propulsion Laboratory (JPL) which has many attractive user features, including service diversity and a handheld terminal. Significant technical challenges addressed in formulating the PASS space and ground segments are discussed. PASS system concept and basic design features, high risk enabling technologies, an optimized multiple access scheme, alternative antenna coverage concepts, the use of non-geostationary orbits, user terminal radiation constraints, and user terminal frequency reference are covered.

Concept of Operations for RCO SPO

NASA Technical Reports Server (NTRS)

Matessa, Michael; Strybel, Thomas; Vu, Kim; Battiste, Vernol; Schnell, Thomas

2017-01-01

Reduced crew operations (RCO) refers to the reduction of crew members flying long-haul or military operations with more than one pilot onboard. Single pilot operations (SPO) refers to flying a commercial transport aircraft with only one pilot on board the aircraft, assisted by advanced onboard automation andor ground operators providing piloting support services. Properly implemented, RCO/SPO could provide operating cost savings while maintaining a level of safety no less than conventional two-pilot commercial operations. A concept of operations (ConOps) for any paradigm describes the characteristics of its various components and their integration in a multi-dimensional design space. This paper presents key options for humanautomation function allocation being considered by NASA in its ongoing development of RCO/SPO ConOps.

Forest landscape analysis and design: a process for developing and implementing land management objectives for landscape patterns.

Treesearch

Nancy Diaz; Dean Apostol

1992-01-01

This publication presents a Landscape Design and Analysis Process, along with some simple methods and tools for describing landscapes and their function. The information is qualitative in nature and highlights basic concepts, but does not address landscape ecology in great depth. Readers are encouraged to consult the list of selected references in Chapter 2 if they...

Virtual Reality in the Classroom.

ERIC Educational Resources Information Center

Pantelidis, Veronica S.

1993-01-01

Considers the concept of virtual reality; reviews its history; describes general uses of virtual reality, including entertainment, medicine, and design applications; discusses classroom uses of virtual reality, including a software program called Virtus WalkThrough for use with a computer monitor; and suggests future possibilities. (34 references)…

Alternatives for discounting in the analysis of noninferiority trials.

PubMed

Snapinn, Steven M

2004-05-01

Determining the efficacy of an experimental therapy relative to placebo on the basis of an active-control noninferiority trial requires reference to historical placebo-controlled trials. The validity of the resulting comparison depends on two key assumptions: assay sensitivity and constancy. Since the truth of these assumptions cannot be verified, it seems logical to raise the standard of evidence required to declare efficacy; this concept is referred to as discounting. It is not often recognized that two common design and analysis approaches, setting a noninferiority margin and requiring preservation of a fraction of the standard therapy's effect, are forms of discounting. The noninferiority margin is a particularly poor approach, since its degree of discounting depends on an irrelevant factor. Preservation of effect is more reasonable, but it addresses only the constancy assumption, not the issue of assay sensitivity. Gaining consensus on the most appropriate approach to the design and analysis of noninferiority trials will require a common understanding of the concept of discounting.

Statistics for Radiology Research.

PubMed

Obuchowski, Nancy A; Subhas, Naveen; Polster, Joshua

2017-02-01

Biostatistics is an essential component in most original research studies in imaging. In this article we discuss five key statistical concepts for study design and analyses in modern imaging research: statistical hypothesis testing, particularly focusing on noninferiority studies; imaging outcomes especially when there is no reference standard; dealing with the multiplicity problem without spending all your study power; relevance of confidence intervals in reporting and interpreting study results; and finally tools for assessing quantitative imaging biomarkers. These concepts are presented first as examples of conversations between investigator and biostatistician, and then more detailed discussions of the statistical concepts follow. Three skeletal radiology examples are used to illustrate the concepts. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Integrating Green Building Criteria Into Housing Design Processes Case Study: Tropical Apartment At Kebon Melati, Jakarta

NASA Astrophysics Data System (ADS)

Farid, V. L.; Wonorahardjo, S.

2018-05-01

The implementation of Green Building criteria is relatively new in architectural practice, especially in Indonesia. Consequently, the integration of these criteria into design process has the potential to change the design process itself. The implementation of the green building criteria into the conventional design process will be discussed in this paper. The concept of this project is to design a residential unit with a natural air-conditioning system. To achieve this purpose, the Green Building criteria has been implemented since the beginning of the design process until the detailing process on the end of the project. Several studies was performed throughout the design process, such as: (1) Conceptual review, where several professionally proved theories related to Tropical Architecture and passive design are used for a reference, and (2) Computer simulations, such as Computational Fluid Dynamics (CFD) and wind tunnel simulation, used to represent the dynamic response of the surrounding environment towards the building. Hopefully this paper may become a reference for designing a green residential building.

Student Math Skills Reference Manual.

ERIC Educational Resources Information Center

Wilson, Odell; And Others

This mathematics support guide is intended for use by vocational students and instructors as a review of essential mathematics concepts and for problem-solving exercises in the vocations. It is designed to accompany the "Mathematical Skills Inventory," which tests mathematics skills, attitudes, and background. A section entitled Arithmetic Skills…

An Integrative Landscape-Scale Exercise for Introductory Soil Science Classes.

ERIC Educational Resources Information Center

Levy, D. B.; Graham, R. C.

1993-01-01

Describes how teachers can improve introductory soil science courses by applying concepts taught in the classroom to actual field situations. Presents a specific example of a field exercise designed to illustrate soil properties and processes with respect to their environmental settings. (11 references) (Author/MCO)

Only an Expensive Horoscope.

ERIC Educational Resources Information Center

Berg, Craig A.; Clough, Michael

1991-01-01

Madeline Hunter's statements and teaching examples lead to a conception of teaching best described as a teacher-centered, funnel model. The Hunter lesson design may be useful to science teachers for some instructional objectives, but it cannot be expected to improve the state of science education. Includes five references. (MLH)

Concept of multiple-cell cavity for axion dark matter search

NASA Astrophysics Data System (ADS)

Jeong, Junu; Youn, SungWoo; Ahn, Saebyeok; Kim, Jihn E.; Semertzidis, Yannis K.

2018-02-01

In cavity-based axion dark matter search experiments exploring high mass regions, multiple-cavity design is under consideration as a method to increase the detection volume within a given magnet bore. We introduce a new idea, referred to as a multiple-cell cavity, which provides various benefits including a larger detection volume, simpler experimental setup, and easier phase-matching mechanism. We present the characteristics of this concept and demonstrate the experimental feasibility with an example of a double-cell cavity.

Fission Surface Power System Initial Concept Definition

NASA Technical Reports Server (NTRS)

2010-01-01

Under the NASA Exploration Technology Development Program (ETDP) and in partnership with the Department of Energy (DOE), NASA has embarked on a project to develop Fission Surface Power (FSP) technology. The primary goals of the project are to 1) develop FSP concepts that meet expected surface power requirements at reasonable cost with added benefits over other options, 2) establish a hardwarebased technical foundation for FSP design concepts and reduce overall development risk, 3) reduce the cost uncertainties for FSP and establish greater credibility for flight system cost estimates, and 4) generate the key products to allow NASA decision-makers to consider FSP as a preferred option for flight development. The FSP project was initiated in 2006 as the Prometheus Program and the Jupiter Icy Moons Orbiter (JIMO) mission were phased-out. As a first step, NASA Headquarters commissioned the Affordable Fission Surface Power System Study to evaluate the potential for an affordable FSP development approach. With a cost-effective FSP strategy identified, the FSP team evaluated design options and selected a Preliminary Reference Concept to guide technology development. Since then, the FSP Preliminary Reference Concept has served as a point-of-departure for several NASA mission architecture studies examining the use of nuclear power and has provided the foundation for a series of "Pathfinder" hardware tests. The long-term technology goal is a Technology Demonstration Unit (TDU) integrated system test using full-scale components and a non-nuclear reactor simulator. The FSP team consists of Glenn Research Center (GRC), Marshall Space Flight Center (MSFC) and the DOE National Laboratories at Los Alamos (LANL), Idaho (INL), Oak Ridge (ORNL), and Sandia (SNL). The project is organized into two main elements: Concept Definition and Risk Reduction. Under Concept Definition, the team performs trade studies, develops analytical tools, and formulates system concepts. Under Risk Reduction the team develops hardware prototypes and conducts laboratory-based testing.

A Multi-Modality Mobility Concept for a Small Package Delivery UAV

NASA Technical Reports Server (NTRS)

Young, L. A.

2017-01-01

This paper will discuss a different approach to the typical notional small package delivery drone concept. Most delivery drone concepts employ a point-to-point aerial delivery CONOPS (Concept of Operations) from a warehouse directly to the front or back yards of a customers residence or a commercial office space. Instead, the proposed approach is somewhat analogous to current postal deliveries: a small aerial vehicle flies from a warehouse to designated neighborhood VTOL (Vertical Take-Off and Landing) landing spots where the aerial vehicle then converts to a "roadable" (ground-mobility) vehicle that then transits on sidewalks and/or bicycle paths till it arrives to the residence/office drop-off points. This concept and associated platform or vehicle will be referred in this paper as MICHAEL (Multimodal Intra-City Hauling and Aerial-Effected Logistics) concept. It is suggested that the MICHAEL concept potentially results in a more community friendly "delivery drone" approach.

Transitioning from conceptual design to construction performance specification

NASA Astrophysics Data System (ADS)

Jeffers, Paul; Warner, Mark; Craig, Simon; Hubbard, Robert; Marshall, Heather

2012-09-01

On successful completion of a conceptual design review by a funding agency or customer, there is a transition phase before construction contracts can be placed. The nature of this transition phase depends on the Project's approach to construction and the particular subsystem being considered. There are generically two approaches; project retention of design authority and issuance of build to print contracts, or issuance of subsystem performance specifications with controlled interfaces. This paper relates to the latter where a proof of concept (conceptual or reference design) is translated into performance based sub-system specifications for competitive tender. This translation is not a straightforward process and there are a number of different issues to consider in the process. This paper deals with primarily the Telescope mount and Enclosure subsystems. The main subjects considered in this paper are: • Typical status of design at Conceptual Design Review compared with the desired status of Specifications and Interface Control Documents at Request for Quotation. • Options for capture and tracking of system requirements flow down from science / operating requirements and sub-system requirements, and functional requirements derived from reference design. • Requirements that may come specifically from the contracting approach. • Methods for effective use of reference design work without compromising a performance based specification. • Management of project team's expectation relating to design. • Effects on cost estimates from reference design to actual. This paper is based on experience and lessons learned through this process on both the VISTA and the ATST projects.

The CELSS Test Facility Project - An example of a CELSS flight experiment system

NASA Technical Reports Server (NTRS)

Macelroy, R. D.; Straight, C. L.

1992-01-01

The design of the facility is described in terms of its use as an investigation tool for evaluating crop growth in space with reference to required emerging technologies. NASA's CELSS Test Facility (CTF) is designed to permit the measurement of crop-plant productivity under microgravity conditions including biomass production, food production, water transpiration, and O2/CO2 exchanges. Crucial hardware tests and qualifications are identified to assure the operation of CTF technologies in space including the nutrient-delivery, water-condensation, and gas-liquid-mixing subsystems. The design concept and related scientific requirements are described and shown to provide microgravity crop research. The CTF is expected to provide data for plant research and for concepts for bioregenerative life-support systems for applications to Martian, lunar, and space-station missions.

A high resolution cavity BPM for the CLIC Test Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chritin, N.; Schmickler, H.; Soby, L.

2010-08-01

In frame of the development of a high resolution BPM system for the CLIC Main Linac we present the design of a cavity BPM prototype. It consists of a waveguide loaded dipole mode resonator and a monopole mode reference cavity, both operating at 15 GHz, to be compatible with the bunch frequencies at the CLIC Test Facility. Requirements, design concept, numerical analysis, and practical considerations are discussed.

An investigation and conceptual design of a holographic starfield and landmark tracker

NASA Technical Reports Server (NTRS)

Welch, J. D.

1973-01-01

The analysis, experiments, and design effort of this study have supported the feasibility of the basic holographic tracker concept. Image intensifiers and photoplastic recording materials were examined, along with a Polaroid rapid process silver halide material. Two reference beam, coherent optical matched filter technique was used for multiplexing spatial frequency filters for starfields. A 1 watt HeNe laser and an electro-optical readout are also considered.

Cognitive ability, academic achievement and academic self-concept: extending the internal/external frame of reference model.

PubMed

Chen, Ssu-Kuang; Hwang, Fang-Ming; Yeh, Yu-Chen; Lin, Sunny S J

2012-06-01

Marsh's internal/external (I/E) frame of reference model depicts the relationship between achievement and self-concept in specific academic domains. Few efforts have been made to examine concurrent relationships among cognitive ability, achievement, and academic self-concept (ASC) within an I/E model framework. To simultaneously examine the influences of domain-specific cognitive ability and grades on domain self-concept in an extended I/E model, including the indirect effect of domain-specific cognitive ability on domain self-concept via grades. Tenth grade respondents (628 male, 452 female) to a national adolescent survey conducted in Taiwan. Respondents completed surveys designed to measure maths and verbal aptitudes. Data on Maths and Chinese class grades and self-concepts were also collected. Statistically significant and positive path coefficients were found between cognitive ability and self-concept in the same domain (direct effect) and between these two constructs via grades (indirect effect). The cross-domain effects of either ability or grades on ASC were negatively significant. Taiwanese 10th graders tend to evaluate their ASCs based on a mix of ability and achievement, with achievement as a mediator exceeding ability as a predictor. In addition, the cross-domain effects suggest that Taiwanese students are likely to view Maths and verbal abilities and achievements as distinctly different. ©2011 The British Psychological Society.

Evolution of Orion Mission Design for Exploration Mission 1 and 2

NASA Technical Reports Server (NTRS)

Gutkowski, Jeffrey P.; Dawn, Timothy F.; Jedrey, Richard M.

2016-01-01

The evolving mission design and concepts of NASA's next steps have shaped Orion into the spacecraft that it is today. Since the initial inception of Orion, through the Constellation Program, and now in the Exploration Mission frame-work with the Space Launch System (SLS), each mission design concept and program goal have left Orion with a set of capabilities that can be utilized in many different mission types. Exploration Missions 1 and 2 (EM-1 and EM-2) have now been at the forefront of the mission design focus for the last several years. During that time, different Design Reference Missions (DRMs) were built, analyzed, and modified to solve or mitigate enterprise level design trades to ensure a viable mission from launch to landing. The resulting DRMs for EM-1 and EM-2 were then expanded into multi-year trajectory scans to characterize vehicle performance and Earth-Moon geometry trends. This provides Orion's subsystems with stressing reference trajectories to help design their system. Now that Orion has progressed through the Preliminary and Critical Design Re-views (PDR and CDR) there is a general shift in the focus of mission design from aiding the vehicle design to providing mission specific products needed for pre-flight and real time operations. Some of the mission specific products need-ed include analysis of steering law performance, inputs into navigational accura-cy assessments, abort options at any point in the mission for each valid trajecto-ry in the launch window, recontact avoidance between the upper stage and Orion post nominal separation, etc.

Influence of Alternative Engine Concepts on LCTR2 Sizing and Mission Profile

NASA Technical Reports Server (NTRS)

Acree, C. W., Jr.; Snyder, Christopher A.

2012-01-01

The Large Civil Tiltrotor (LCTR) was developed as part of the NASA Heavy Lift Rotorcraft Systems Investigation in order to establish a consistent basis for evaluating the benefits of advanced technology for large tiltrotors. The concept has since evolved into the second-generation LCTR2, designed to carry 90 passengers for 1,000 nm at 300 knots, with vertical takeoff and landing. This paper examines the impact of advanced propulsion system concepts on LCTR2 sizing. Two concepts were studied: an advanced, single-speed engine with a conventional power turbine layout (Advanced Conventional Engine, or ACE), and a variable-speed power turbine engine (VSPT). The ACE is the lighter engine, but requires a multi-speed (shifting) gearbox, whereas the VSPT uses a lighter, fixed-ratio gearbox. The NASA Design and Analysis of Rotorcraft (NDARC) design code was used to study the trades between rotor and engine efficiency and weight. Rotor performance was determined by Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics (CAMRAD II), and engine performance was estimated with the Numerical Propulsion System Simulation (NPSS). Design trades for the ACE vs. VSPT are presented in terms of vehicle weight empty for variations in mission altitude and range; the effect of different One Engine Inoperative (OEI) criteria are also examined. Because of its strong effect on gearbox weight and on both rotor and engine efficiency, rotor speed was chosen as the reference design variable for comparing design trades. The two propulsion concepts had nearly identical vehicle weights and mission fuel consumption, and their relative advantages varied little with cruise altitude, mission range, or OEI criteria; high cruise altitude and low cruise tip speed were beneficial for both concepts.

HSI top-down requirements analysis for ship manpower reduction

NASA Astrophysics Data System (ADS)

Malone, Thomas B.; Bost, J. R.

2000-11-01

U.S. Navy ship acquisition programs such as DD 21 and CVNX are increasingly relying on top down requirements analysis (TDRA) to define and assess design approaches for workload and manpower reduction, and for ensuring required levels of human performance, reliability, safety, and quality of life at sea. The human systems integration (HSI) approach to TDRA begins with a function analysis which identifies the functions derived from the requirements in the Operational Requirements Document (ORD). The function analysis serves as the function baseline for the ship, and also supports the definition of RDT&E and Total Ownership Cost requirements. A mission analysis is then conducted to identify mission scenarios, again based on requirements in the ORD, and the Design Reference Mission (DRM). This is followed by a mission/function analysis which establishes the function requirements to successfully perform the ship's missions. Function requirements of major importance for HSI are information, performance, decision, and support requirements associated with each function. An allocation of functions defines the roles of humans and automation in performing the functions associated with a mission. Alternate design concepts, based on function allocation strategies, are then described, and task networks associated with the concepts are developed. Task network simulations are conducted to assess workloads and human performance capabilities associated with alternate concepts. An assessment of the affordability and risk associated with alternate concepts is performed, and manning estimates are developed for feasible design concepts.

14 CFR 1240.102 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Definitions. 1240.102 Section 1240.102... Contributions Board. (d) Commercial quality refers to computer software that is not in an experimental or beta..., engineering or scientific concept, idea, design, process, or product, reported as new technology on NASA Form...

Extended development of a sodium hydroxide thermal energy storage module

NASA Technical Reports Server (NTRS)

Rice, R. E.; Rowny, P. E.; Cohen, B. M.

1980-01-01

The post-test evaluation of a single heat exchanger sodium hydroxide thermal energy storage module for use in solar electric generation is reported. Chemical analyses of the storage medium used in the experimental model are presented. The experimental verification of the module performance using an alternate heat transfer fluid, Caloria HT-43, is described. Based on these results, a design analysis of a dual heat exchanger concept within the storage module is presented. A computer model and a reference design for the dual system (storage working fluid/power cycle working fluid) were completed. The dual system is estimated to have a capital cost of approximately one half that of the single heat exchanger concept.

Advanced Radioisotope Power System Enabled Titan Rover Concept with Inflatable Wheels

NASA Astrophysics Data System (ADS)

Balint, Tibor S.; Schriener, Timothy M.; Shirley, James H.

2006-01-01

The Decadal Survey identified Titan as one of the top priority science destinations in the large moons category, while NASA's proposed Design Reference Mission Set ranked a Titan in-situ explorer second, after a recommended Europa Geophysical Explorer mission. This paper discusses a Titan rover concept, enabled by a single advanced Radioisotope Power System that could provide about 110 We (BOL). The concept targets the smaller Flagship or potentially the New Frontiers mission class. This MSL class rover would traverse on four 1.5 m diameter inflatable wheels during its 3 years mission duration and would use as much design and flight heritage as possible to reduce mission cost. Direct to Earth communication would remove the need for a relay orbiter. Details on the strawman instrument payload, and rover subsystems are given for this science driven mission concept. In addition, power system trades between Advanced RTG, TPV, and Advanced-Stirling and Brayton RPSs are outlined. While many possible approaches exist for Titan in-situ exploration, the Titan rover concept presented here could provide a scientifically interesting and programmatically affordable solution.

ARPS Enabled Titan Rover Concept with Inflatable Wheels

NASA Technical Reports Server (NTRS)

Balint, Tibor S.; Schriener, Timothy M.; Shirley, James H.

2006-01-01

The Decadal Survey identified Titan as one of the top priority science destinations in the large moons category, while NASA's proposed Design Reference Mission Set ranked a Titan in-situ explorer second, after a recommended Europa Geophysical Observer mission. This paper discusses a Titan rover concept, enabled by a single advanced Radioisotope Power System that could provide about 110We (BOL). The concept targets the smaller Flagship or potentially the New Frontiers mission class. This MSL class rover would traverse on four 1.5 m diameter inflatable wheels during its 3 years mission duration and would use as much design and flight heritage as possible to reduce mission cost. Direct to Earth communication would remove the need for a relay orbiter. Details on the strawman instrument payload, and rover subsystems are given for this science driven mission concept. In addition, power system trades between Advanced RTG, TPV, and Advanced Stirling and Brayton Radioisotope Power Systems (RPS) are outlined. While many possible approaches exist for Titan in-situ exploration, the Titan rover concept presented here could provide a scientifically interesting and programmatically affordable solution.

The Europa Mission: Multiple Europa Flyby Trajectory Design Trades and Challenges

NASA Technical Reports Server (NTRS)

Lam, Try; Arrieta-Camacho, Juan J.; Buffington, Brent B.

2015-01-01

With potential sources of water, energy and other chemicals essential for life, Europa is a top candidate for finding current life in our Solar System outside of Earth. This paper describes the current trajectory design concept for a multiple Europa flyby mission and discusses several trajectory design challenges. The candidate reference trajectory utilizes multiple Europa flybys while around Jupiter to enable near global coverage of Europa while balancing science requirements, radiation dose, propellant usage, and flight time. Trajectory design trades and robustness are also discussed.

Space transfer concepts and analysis for exploration missions. Implementation plan and element description document. Volume 1: Major trades. Book 1: Draft final

NASA Technical Reports Server (NTRS)

1991-01-01

This document presents trade studies and reference concept designs accomplished during a study of Space Transfer Concepts and Analyses for Exploration Missions (STCAEM). This volume contains the major top level trades, level 2 trades conducted in support of NASA's Lunar/Mars Exploration Program Office, and a synopsis of the vehicles for different propulsion systems under trade consideration. The vehicles are presented in more detail in other volumes of this report. Book 1 of Volume 1 covers the following analyses: lunar/Mars commonality trades, lunar/Mars mission operations, and Mars transfer systems.

Reference Models for Structural Technology Assessment and Weight Estimation

NASA Technical Reports Server (NTRS)

Cerro, Jeff; Martinovic, Zoran; Eldred, Lloyd

2005-01-01

Previously the Exploration Concepts Branch of NASA Langley Research Center has developed techniques for automating the preliminary design level of launch vehicle airframe structural analysis for purposes of enhancing historical regression based mass estimating relationships. This past work was useful and greatly reduced design time, however its application area was very narrow in terms of being able to handle a large variety in structural and vehicle general arrangement alternatives. Implementation of the analysis approach presented herein also incorporates some newly developed computer programs. Loft is a program developed to create analysis meshes and simultaneously define structural element design regions. A simple component defining ASCII file is read by Loft to begin the design process. HSLoad is a Visual Basic implementation of the HyperSizer Application Programming Interface, which automates the structural element design process. Details of these two programs and their use are explained in this paper. A feature which falls naturally out of the above analysis paradigm is the concept of "reference models". The flexibility of the FEA based JAVA processing procedures and associated process control classes coupled with the general utility of Loft and HSLoad make it possible to create generic program template files for analysis of components ranging from something as simple as a stiffened flat panel, to curved panels, fuselage and cryogenic tank components, flight control surfaces, wings, through full air and space vehicle general arrangements.

Multi-Organization Multi-Discipline Effort Developing a Mitigation Concept for Planetary Defense

NASA Technical Reports Server (NTRS)

Leung, Ronald Y.; Barbee, Brent W.; Seery, Bernard D.; Bambacus, Myra; Finewood, Lee; Greenaugh, Kevin C.; Lewis, Anthony; Dearborn, David; Miller, Paul L.; Weaver, Robert P.;

System engineering toolbox for design-oriented engineers

NASA Technical Reports Server (NTRS)

Goldberg, B. E.; Everhart, K.; Stevens, R.; Babbitt, N., III; Clemens, P.; Stout, L.

1994-01-01

This system engineering toolbox is designed to provide tools and methodologies to the design-oriented systems engineer. A tool is defined as a set of procedures to accomplish a specific function. A methodology is defined as a collection of tools, rules, and postulates to accomplish a purpose. For each concept addressed in the toolbox, the following information is provided: (1) description, (2) application, (3) procedures, (4) examples, if practical, (5) advantages, (6) limitations, and (7) bibliography and/or references. The scope of the document includes concept development tools, system safety and reliability tools, design-related analytical tools, graphical data interpretation tools, a brief description of common statistical tools and methodologies, so-called total quality management tools, and trend analysis tools. Both relationship to project phase and primary functional usage of the tools are also delineated. The toolbox also includes a case study for illustrative purposes. Fifty-five tools are delineated in the text.

Advanced data management design for autonomous telerobotic systems in space using spaceborne symbolic processors

NASA Technical Reports Server (NTRS)

Goforth, Andre

1987-01-01

The use of computers in autonomous telerobots is reaching the point where advanced distributed processing concepts and techniques are needed to support the functioning of Space Station era telerobotic systems. Three major issues that have impact on the design of data management functions in a telerobot are covered. It also presents a design concept that incorporates an intelligent systems manager (ISM) running on a spaceborne symbolic processor (SSP), to address these issues. The first issue is the support of a system-wide control architecture or control philosophy. Salient features of two candidates are presented that impose constraints on data management design. The second issue is the role of data management in terms of system integration. This referes to providing shared or coordinated data processing and storage resources to a variety of telerobotic components such as vision, mechanical sensing, real-time coordinated multiple limb and end effector control, and planning and reasoning. The third issue is hardware that supports symbolic processing in conjunction with standard data I/O and numeric processing. A SSP that currently is seen to be technologically feasible and is being developed is described and used as a baseline in the design concept.

Microprocessor design for GaAs technology

NASA Astrophysics Data System (ADS)

Milutinovic, Veljko M.

Recent advances in the design of GaAs microprocessor chips are examined in chapters contributed by leading experts; the work is intended as reading material for a graduate engineering course or as a practical R&D reference. Topics addressed include the methodology used for the architecture, organization, and design of GaAs processors; GaAs device physics and circuit design; design concepts for microprocessor-based GaAs systems; a 32-bit GaAs microprocessor; a 32-bit processor implemented in GaAs JFET; and a direct coupled-FET-logic E/D-MESFET experimental RISC machine. Drawings, micrographs, and extensive circuit diagrams are provided.

[Understanding mistake-proofing].

PubMed

de Saint Maurice, G; Giraud, N; Ausset, S; Auroy, Y; Lenoir, B; Amalberti, R

2011-01-01

The mistake-proofing concept often refers to physical devices that prevent actors from making a wrong action. In anaesthesiology, one immediately thinks to specific design of outlets for medical gases. More generally, the principle of mistake-proofing is to avoid an error, by placing knowledge in the world rather than knowledge in the head. As it often happens in risk management, healthcare has received information transfers from the industry. Computer is changing the concept of mistake-proofing, initially based on physical design, such as aerospace and automotive industry. The mistake-proofing concept may be applied to prevention, detection, and mitigation of errors. The forcing functions are a specific part of mistake-proofing: they prevent a wrong action or they force a virtuous one. Grout proposes a little shortcut to identify mistake-proofing devices: "If it is not possible to picture it in action, it is probably not a mistake-proofing device". Copyright © 2010 Elsevier Masson SAS. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This bibliography provides documentation for use by state public utility commissions and major nonregulated utilities in evaluating the applicability of a wide range of electric utility rate design and regulatory concepts in light of certain regulatory objectives. Part I, Utility Regulatory Objectives, contains 2084 citations on conservation of energy and capital; efficient use of facilities and resources; and equitable rates to electricity consumers. Part II, Rate Design Concepts, contains 1238 citations on time-of-day rates; seasonally-varying rates; cost-of-service rates; interruptible rates (including the accompanying use of load management techniques); declining block rates; and lifeline rates. Part III, Regulatory Concepts, contains 1282more » references on restrictions on master metering; procedures for review of automatic adjustment clauses; prohibitions of rate or regulatory discrimination against solar, wind, or other small energy systems; treatment of advertising expenses; and procedures to protect ratepayers from abrupt termination of service.« less

System level electrochemical principles

NASA Technical Reports Server (NTRS)

Thaller, L. H.

1985-01-01

The traditional electrochemical storage concepts are difficult to translate into high power, high voltage multikilowatt storage systems. The increased use of electronics, and the use of electrochemical couples that minimize the difficulties associated with the corrective measures to reduce the cell to cell capacity dispersion were adopted by battery technology. Actively cooled bipolar concepts are described which represent some attractive alternative system concepts. They are projected to have higher energy densities lower volumes than current concepts. They should be easier to scale from one capacity to another and have a closer cell to cell capacity balance. These newer storage system concepts are easier to manage since they are designed to be a fully integrated battery. These ideas are referred to as system level electrochemistry. The hydrogen-oxygen regenerative fuel cells (RFC) is probably the best example of the integrated use of these principles.

A new piezoelectric energy harvesting design concept: multimodal energy harvesting skin.

PubMed

Lee, Soobum; Youn, Byeng D

2011-03-01

This paper presents an advanced design concept for a piezoelectric energy harvesting (EH), referred to as multimodal EH skin. This EH design facilitates the use of multimodal vibration and enhances power harvesting efficiency. The multimodal EH skin is an extension of our previous work, EH skin, which was an innovative design paradigm for a piezoelectric energy harvester: a vibrating skin structure and an additional thin piezoelectric layer in one device. A computational (finite element) model of the multilayered assembly - the vibrating skin structure and piezoelectric layer - is constructed and the optimal topology and/or shape of the piezoelectric layer is found for maximum power generation from multiple vibration modes. A design rationale for the multimodal EH skin was proposed: designing a piezoelectric material distribution and external resistors. In the material design step, the piezoelectric material is segmented by inflection lines from multiple vibration modes of interests to minimize voltage cancellation. The inflection lines are detected using the voltage phase. In the external resistor design step, the resistor values are found for each segment to maximize power output. The presented design concept, which can be applied to any engineering system with multimodal harmonic-vibrating skins, was applied to two case studies: an aircraft skin and a power transformer panel. The excellent performance of multimodal EH skin was demonstrated, showing larger power generation than EH skin without segmentation or unimodal EH skin.

Assessing voids in SNOMED CT for pediatric concepts.

PubMed

Wade, Geraldine; Gotlieb, Edward M; Weigle, Carl; Warren, Robert

2008-11-06

Reference terminologies such as SNOMED CT may have voids in their representation of concepts important to the practice of pediatrics. In this project, relevant pediatric concepts were extracted from an American Academy of Pediatrics guideline and were mapped to SNOMED CT. Concepts were identified that should be included in the standard reference terminology. A process for formally evaluating voids in reference terminologies for concepts needed in pediatric clinical decision-making is planned as a next step.

Basic Reference Tools for Nursing Research. A Workbook with Explanations and Examples.

ERIC Educational Resources Information Center

Smalley, Topsy N.

This workbook is designed to introduce nursing students to basic concepts and skills needed for searching the literatures of medicine, nursing, and allied health areas for materials relevant to specific information needs. The workbook introduces the following research tools: (1) the National Library of Medicine's MEDLINE searches, including a…

Arts Education Facilities Planner for Grades 9-12.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of School Support.

This document suggests facilities necessary to conduct instruction in arts programs in grades 9-12 and conveys essential features that should be present. As a reference document for school facilities designers, it describes arts education programs and the facilities that support them, with some sections focusing on the concepts and features common…

Evidence-Based Design and Research-Informed Design: What's the Difference? Conceptual Definitions and Comparative Analysis.

PubMed

Peavey, Erin; Vander Wyst, Kiley B

2017-10-01

This article provides critical examination and comparison of the conceptual meaning and underlying assumptions of the concepts evidence-based design (EBD) and research-informed design (RID) in order to facilitate practical use and theoretical development. In recent years, EBD has experienced broad adoption, yet it has been simultaneously critiqued for rigidity and misapplication. Many practitioners are gravitating to the term RID to describe their method of integrating knowledge into the design process. However, the term RID lacks a clear definition and the blurring of terms has the potential to weaken advances made integrating research into practice. Concept analysis methods from Walker and Avant were used to define the concepts for comparison. Conceptual definitions, process descriptions, examples (i.e., model cases), and methods of evaluation are offered for EBD and RID. Although EBD and RID share similarities in meaning, the two terms are distinct. When comparing evidence based (EB) and research informed, EB is a broad base of information types (evidence) that are narrowly applied (based), while the latter references a narrow slice of information (research) that is broadly applied (informed) to create an end product of design. Much of the confusion between the use of the concepts EBD and RID arises out of differing perspectives between the way practitioners and academics understand the underlying terms. The authors hope this article serves to generate thoughtful dialogue, which is essential to the development of a discipline, and look forward to the contribution of the readership.

Green Tunnel Construction Technology and Application

NASA Astrophysics Data System (ADS)

Zhang, J. L.; Shi, P. X.; Huang, J.; Li, H. G.; Zhou, X. Q.

2018-05-01

With the dramatic growth of urban tunnels in recent years, energy saving and environmental protection have received intensive attention in tunnel construction and operation. As reference to the concept of green buildings, this paper proposes the concept of green tunnels. Combining with the key issues of tunnel design, construction, operation and maintenance, the major aspects of green tunnels including prefabricated construction, noise control, ventilation & lighting energy saving, and digital intelligent maintenance are discussed and the future development of green tunnels is outlined with the economic and social benefits as indicators.

Referenced-site environmental document for a Monitored Retrievable Storage facility: backup waste management option for handling 1800 MTU per year

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silviera, D.J.; Aaberg, R.L.; Cushing, C.E.

This environmental document includes a discussion of the purpose of a monitored retrievable storage facility, a description of two facility design concepts (sealed storage cask and field drywell), a description of three reference sites (arid, warm-wet, and cold-wet), and a discussion and comparison of the impacts associated with each of the six site/concept combinations. This analysis is based on a 15,000-MTU storage capacity and a throughput rate of up to 1800 MTU per year.

NASA general aviation crashworthiness seat development

NASA Technical Reports Server (NTRS)

Fasanella, E. L.; Alfaro-Bou, E.

1979-01-01

Three load limiting seat concepts for general aviation aircraft designed to lower the deceleration of the occupant in the event of a crash were sled tested and evaluated with reference to a standard seat. Dummy pelvis accelerations were reduced up to 50 percent with one of the concepts. Computer program MSOMLA (Modified Seat Occupant Model for Light Aircraft) was used to simulate the behavior of a dummy passenger in a NASA full-scale crash test of a twin engine light aircraft. A computer graphics package MANPLOT was developed to pictorially represent the occupant and seat motion.

Advanced transportation system study: Manned launch vehicle concepts for two way transportation system payloads to LEO

NASA Technical Reports Server (NTRS)

Duffy, James B.

1993-01-01

The purpose of the Advanced Transportation System Study (ATSS) task area 1 study effort is to examine manned launch vehicle booster concepts and two-way cargo transfer and return vehicle concepts to determine which of the many proposed concepts best meets NASA's needs for two-way transportation to low earth orbit. The study identified specific configurations of the normally unmanned, expendable launch vehicles (such as the National Launch System family) necessary to fly manned payloads. These launch vehicle configurations were then analyzed to determine the integrated booster/spacecraft performance, operations, reliability, and cost characteristics for the payload delivery and return mission. Design impacts to the expendable launch vehicles which would be required to perform the manned payload delivery mission were also identified. These impacts included the implications of applying NASA's man-rating requirements, as well as any mission or payload unique impacts. The booster concepts evaluated included the National Launch System (NLS) family of expendable vehicles and several variations of the NLS reference configurations to deliver larger manned payload concepts (such as the crew logistics vehicle (CLV) proposed by NASA JSC). Advanced, clean sheet concepts such as an F-1A engine derived liquid rocket booster (LRB), the single stage to orbit rocket, and a NASP-derived aerospace plane were also included in the study effort. Existing expendable launch vehicles such as the Titan 4, Ariane 5, Energia, and Proton were also examined. Although several manned payload concepts were considered in the analyses, the reference manned payload was the NASA Langley Research Center's HL-20 version of the personnel launch system (PLS). A scaled up version of the PLS for combined crew/cargo delivery capability, the HL-42 configuration, was also included in the analyses of cargo transfer and return vehicle (CTRV) booster concepts. In addition to strictly manned payloads, two-way cargo transportation systems (CTRV's) were also examined. The study provided detailed design and analysis of the performance, reliability, and operations of these concepts. The study analyzed these concepts as unique systems and also analyzed several combined CTRV/booster configurations as integrated launch systems (such as for launch abort analyses). Included in the set of CTRV concepts analyzed were the medium CTRV, the integral CTRV (in both a pressurized and unpressurized configuration), the winged CTRV, and an attached cargo carrier for the PLS system known as the PLS caboose.

Lunar base thermal management/power system analysis and design

NASA Technical Reports Server (NTRS)

Mcghee, Jerry R.

1992-01-01

A compilation of several lunar surface thermal management and power system studies completed under contract and IR&D is presented. The work includes analysis and preliminary design of all major components of an integrated thermal management system, including loads determination, active internal acquisition and transport equipment, external transport systems (active and passive), passive insulation, solar shielding, and a range of lunar surface radiator concepts. Several computer codes were utilized in support of this study, including RADSIM to calculate radiation exchange factors and view factors, RADIATOR (developed in-house) for heat rejection system sizing and performance analysis over a lunar day, SURPWER for power system sizing, and CRYSTORE for cryogenic system performance predictions. Although much of the work was performed in support of lunar rover studies, any or all of the results can be applied to a range of surface applications. Output data include thermal loads summaries, subsystem performance data, mass, and volume estimates (where applicable), integrated and worst-case lunar day radiator size/mass and effective sink temperatures for several concepts (shielded and unshielded), and external transport system performance estimates for both single and two-phase (heat pumped) transport loops. Several advanced radiator concepts are presented, along with brief assessments of possible system benefits and potential drawbacks. System point designs are presented for several cases, executed in support of the contract and IR&D studies, although the parametric nature of the analysis is stressed to illustrate applicability of the analysis procedure to a wide variety of lunar surface systems. The reference configuration(s) derived from the various studies will be presented along with supporting criteria. A preliminary design will also be presented for the reference basing scenario, including qualitative data regarding TPS concerns and issues.

Conceptual design of a data reduction system

NASA Technical Reports Server (NTRS)

1983-01-01

A telemetry data processing system was defined of the Data Reduction. Data reduction activities in support of the developmental flights of the Space Shuttle were used as references against which requirements are assessed in general terms. A conceptual system design believed to offer significant throughput for the anticipated types of data reduction activities is presented. The design identifies the use of a large, intermediate data store as a key element in a complex of high speed, single purpose processors, each of which performs predesignated, repetitive operations on either raw or partially processed data. The recommended approach to implement the design concept is to adopt an established interface standard and rely heavily on mature or promising technologies which are considered main stream of the integrated circuit industry. The design system concept, is believed to be implementable without reliance on exotic devices and/or operational procedures. Numerical methods were employed to examine the feasibility of digital discrimination of FDM composite signals, and of eliminating line frequency noises in data measurements.

Recent advances in approximation concepts for optimum structural design

NASA Technical Reports Server (NTRS)

Barthelemy, Jean-Francois M.; Haftka, Raphael T.

1991-01-01

The basic approximation concepts used in structural optimization are reviewed. Some of the most recent developments in that area since the introduction of the concept in the mid-seventies are discussed. The paper distinguishes between local, medium-range, and global approximations; it covers functions approximations and problem approximations. It shows that, although the lack of comparative data established on reference test cases prevents an accurate assessment, there have been significant improvements. The largest number of developments have been in the areas of local function approximations and use of intermediate variable and response quantities. It also appears that some new methodologies are emerging which could greatly benefit from the introduction of new computer architecture.

Chemical thermodynamic data. 1. The concept of links to the chemical elements and the historical development of key thermodynamic data

NASA Astrophysics Data System (ADS)

Wolery, Thomas J.; Jové Colón, Carlos F.

2017-09-01

Chemical thermodynamic data remain a keystone for geochemical modeling and reactive transport simulation as applied to an increasing number of applications in the earth sciences, as well as applications in other areas including metallurgy, material science, and industrial process design. The last century has seen the development of a large body of thermodynamic data and a number of major compilations. The past several decades have seen the development of thermodynamic databases in digital form designed to support computer calculations. However, problems with thermodynamic data appear to be persistent. One problem pertains to the use of inconsistent primary key reference data. Such data pertain to elemental reference forms and key, stoichiometrically simple chemical species including metal oxides, CO2, water, and aqueous species such as Na+ and Cl-. A consistent set of primary key data (standard Gibbs energies, standard enthalpies, and standard entropies for key chemical species) for 298.15 K and 1 bar pressure is essential. Thermochemical convention is to define the standard Gibbs energy and the standard enthalpy of an individual chemical species in terms of formation from reference forms of the constituent chemical elements. We propose a formal concept of "links" to the elemental reference forms. This concept involves a documented understanding of all reactions and calculations leading to values for a formation property (standard Gibbs energy or enthalpy). A valid link consists of two parts: (a) the path of reactions and corrections and (b) the associated data, which are key data. Such a link differs from a bare "key" or "reference" datum in that it requires additional information. Some or all of its associated data may also be key data. In evaluating a reported thermodynamic datum, one should identify the links to the chemical elements, a process which can be time-consuming and which may lead to a dead end (an incomplete link). The use of two or more inconsistent links to the same elemental reference form in a thermodynamic database will result in an inconsistency in the database. Thus, in constructing a database, it is important to establish a set of reliable links (generally resulting in a set of primary reference data) and then correct all data adopted subsequently for consistency with that set. Recommended values of key data have not been constant through history. We review some of this history through the lens of major compilations and other influential reports, and note a number of problem areas. Finally, we illustrate the concepts developed in this paper by applying them to some key species of geochemical interest, including liquid water; quartz and aqueous silica; and gibbsite, corundum, and the aqueous aluminum ion.

Leadership in evidence-based practice: a systematic review.

PubMed

Reichenpfader, Ursula; Carlfjord, Siw; Nilsen, Per

2015-01-01

This study aims to systematically review published empirical research on leadership as a determinant for the implementation of evidence-based practice (EBP) and to investigate leadership conceptualization and operationalization in this field. A systematic review with narrative synthesis was conducted. Relevant electronic bibliographic databases and reference lists of pertinent review articles were searched. To be included, a study had to involve empirical research and refer to both leadership and EBP in health care. Study quality was assessed with a structured instrument based on study design. A total of 17 studies were included. Leadership was mostly viewed as a modifier for implementation success, acting through leadership support. Yet, there was definitional imprecision as well as conceptual inconsistency, and studies seemed to inadequately address situational and contextual factors. Although referring to an organizational factor, the concept was mostly analysed at the individual or group level. The concept of leadership in implementation science seems to be not fully developed. It is unclear whether attempts to tap the concept of leadership in available instruments truly capture and measure the full range of the diverse leadership elements at various levels. Research in implementation science would benefit from a better integration of research findings from other disciplinary fields. Once a more mature concept has been established, researchers in implementation science could proceed to further elaborate operationalization and measurement. Although the relevance of leadership in implementation science has been acknowledged, the conceptual base of leadership in this field has received only limited attention.

The EVA space suit development in Europe.

PubMed

Skoog, A I

1994-01-01

The progress of the European EVA space suit predevelopment activities has resulted in an improved technical reference concept, which will form the basis for a start of the Phase C/D development work in 1992. Technology development work over the last 2 years has resulted in a considerable amount of test data and a better understanding of the characteristics and behaviour of individual parts of the space suit system, in particular in the areas of suits' mobility and life support functions. This information has enabled a consolidation of certain design features on the one hand, but also led to the challenging of some of the design solutions on the other hand. While working towards an improved situation with respect to the main design drivers mass and cost, the technical concept has been improved with respect to functional safety and ease of handling, taking the evolving Hermes spaceplane requirements into consideration. Necessary hardware and functional redundancies have been implemented taking the operational scenario with Hermes and Columbus servicing into consideration. This paper presents the latest design status of the European EVA space suit concept, with particular emphasis on crew safety, comfort and productivity, in the frame of the predevelopment work for the European Space Agency.

Extended Plate and Beam Wall System: Concept Investigation and Initial Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiehagen, J.; Kochkin, V.

A new and innovative High-R wall design, referred to as the Extended Plate & Beam (EP&B), is under development. The EP&B system uniquely integrates foam sheathing insulation with wall framing such that wood structural panels are installed exterior of the foam sheathing, enabling the use of standard practices for installation of drainage plane, windows and doors, claddings, cavity insulation, and the standard exterior foam sheathing installation approach prone to damage of the foam during transportation of prefabricated wall panels. As part of the ongoing work, the EP&B wall system concept has undergone structural verification testing and has been positively vettedmore » by a group of industry stakeholders. Having passed these initial milestone markers, the advanced wall system design has been analyzed to assess cost implications relative to other advanced wall systems, undergone design assessment to develop construction details, and has been evaluated to develop representative prescriptive requirements for the building code. This report summarizes the assessment steps conducted to-date and provides details of the concept development.« less

Dual-Fuel Propulsion in Single-Stage Advanced Manned Launch System Vehicle

NASA Technical Reports Server (NTRS)

Lepsch, Roger A., Jr.; Stanley, Douglas O.; Unal, Resit

1995-01-01

As part of the United States Advanced Manned Launch System study to determine a follow-on, or complement, to the Space Shuttle, a reusable single-stage-to-orbit concept utilizing dual-fuel rocket propulsion has been examined. Several dual-fuel propulsion concepts were investigated. These include: a separate-engine concept combining Russian RD-170 kerosene-fueled engines with space shuttle main engine-derivative engines: the kerosene- and hydrogen-fueled Russian RD-701 engine; and a dual-fuel, dual-expander engine. Analysis to determine vehicle weight and size characteristics was performed using conceptual-level design techniques. A response-surface methodology for multidisciplinary design was utilized to optimize the dual-fuel vehicles with respect to several important propulsion-system and vehicle design parameters, in order to achieve minimum empty weight. The tools and methods employed in the analysis process are also summarized. In comparison with a reference hydrogen- fueled single-stage vehicle, results showed that the dual-fuel vehicles were from 10 to 30% lower in empty weight for the same payload capability, with the dual-expander engine types showing the greatest potential.

Extended Plate and Beam Wall System: Concept Investigation and Initial Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiehagen, J.; Kochkin, V.

2015-08-01

A new and innovative High-R wall design, referred to as the Extended Plate & Beam (EP&B), is under development. The EP&B system uniquely integrates foam sheathing insulation with wall framing such that wood structural panels are installed exterior of the foam sheathing, enabling the use of standard practices for installation of drainage plane, windows and doors, claddings, cavity insulation, and the standard exterior foam sheathing installation approach prone to damage of the foam during transportation of prefabricated wall panels. As part of the ongoing work, the EP&B wall system concept has undergone structural verification testing and has been positively vettedmore » by a group of industry stakeholders. Having passed these initial milestone markers, the advanced wall system design has been analyzed to assess cost implications relative to other advanced wall systems, undergone design assessment to develop construction details, and has been evaluated to develop representative prescriptive requirements for the building code. This report summarizes the assessment steps conducted to-date and provides details of the concept development.« less

Concept Development and the Development of the God Concept in the Child: A Bibliography.

ERIC Educational Resources Information Center

Pitts, V. Peter, Comp.

This is a 600-reference bibliography on the development of children's conceptions and artistic representations of God. References are presented in 12 categories: (1) The God Concept, (2) Concept Development, (3) Child Development and Developmental Child Psychology, (4) Religious Education, (5) Children's Religious Thought and Development, (6)…

Reference reactor module for NASA's lunar surface fission power system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poston, David I; Kapernick, Richard J; Dixon, David D

Surface fission power systems on the Moon and Mars may provide the first US application of fission reactor technology in space since 1965. The Affordable Fission Surface Power System (AFSPS) study was completed by NASA/DOE to determine the cost of a modest performance, low-technical risk surface power system. The AFSPS concept is now being further developed within the Fission Surface Power (FSP) Project, which is a near-term technology program to demonstrate system-level TRL-6 by 2013. This paper describes the reference FSP reactor module concept, which is designed to provide a net power of 40 kWe for 8 years on themore » lunar surface; note, the system has been designed with technologies that are fully compatible with a Martian surface application. The reactor concept uses stainless-steel based. UO{sub 2}-fueled, pumped-NaK fission reactor coupled to free-piston Stirling converters. The reactor shielding approach utilizes both in-situ and launched shielding to keep the dose to astronauts much lower than the natural background radiation on the lunar surface. The ultimate goal of this work is to provide a 'workhorse' power system that NASA can utilize in near-term and future Lunar and Martian mission architectures, with the eventual capability to evolve to very high power, low mass systems, for either surface, deep space, and/or orbital missions.« less

Space station group activities habitability module study

NASA Technical Reports Server (NTRS)

Nixon, David

1986-01-01

This study explores and analyzes architectural design approaches for the interior of the Space Station Habitability Module (originally defined as Habitability Module 1 in Space Station Reference Configuration Decription, JSC-19989, August 1984). In the Research Phase, architectural program and habitability design guidelines are specified. In the Schematic Design Phase, a range of alternative concepts is described and illustrated with drawings, scale-model photographs and design analysis evaluations. Recommendations are presented on the internal architectural, configuration of the Space Station Habitability Module for such functions as the wardroom, galley, exercise facility, library and station control work station. The models show full design configurations for on-orbit performance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardin, Ernest; Hadgu, Teklu; Greenberg, Harris

This report is one follow-on to a study of reference geologic disposal design concepts (Hardin et al. 2011a). Based on an analysis of maximum temperatures, that study concluded that certain disposal concepts would require extended decay storage prior to emplacement, or the use of small waste packages, or both. The study used nominal values for thermal properties of host geologic media and engineered materials, demonstrating the need for uncertainty analysis to support the conclusions. This report is a first step that identifies the input parameters of the maximum temperature calculation, surveys published data on measured values, uses an analytical approachmore » to determine which parameters are most important, and performs an example sensitivity analysis. Using results from this first step, temperature calculations planned for FY12 can focus on only the important parameters, and can use the uncertainty ranges reported here. The survey of published information on thermal properties of geologic media and engineered materials, is intended to be sufficient for use in generic calculations to evaluate the feasibility of reference disposal concepts. A full compendium of literature data is beyond the scope of this report. The term “uncertainty” is used here to represent both measurement uncertainty and spatial variability, or variability across host geologic units. For the most important parameters (e.g., buffer thermal conductivity) the extent of literature data surveyed samples these different forms of uncertainty and variability. Finally, this report is intended to be one chapter or section of a larger FY12 deliverable summarizing all the work on design concepts and thermal load management for geologic disposal (M3FT-12SN0804032, due 15Aug2012).« less

Progress on DCLL Blanket Concept

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wong, Clement; Abdou, M.; Katoh, Yutai

2013-09-01

Under the US Fusion Nuclear Science and Technology Development program, we have selected the Dual Coolant Lead Lithium concept (DCLL) as a reference blanket, which has the potential to be a high performance DEMO blanket design with a projected thermal efficiency of >40%. Reduced activation ferritic/martensitic (RAF/M) steel is used as the structural material. The self-cooled breeder PbLi is circulated for power conversion and for tritium breeding. A SiC-based flow channel insert (FCI) is used as a means for magnetohydrodynamic pressure drop reduction from the circulating liquid PbLi and as a thermal insulator to separate the high-temperature PbLi (~700°C) frommore » the helium-cooled RAF/M steel structure. We are making progress on related R&D needs to address critical Fusion Nuclear Science and Facility (FNSF) and DEMO blanket development issues. When performing the function as the Interface Coordinator for the DCLL blanket concept, we had been developing the mechanical design and performing neutronics, structural and thermal hydraulics analyses of the DCLL TBM module. We had estimated the necessary ancillary equipment that will be needed at the ITER site and a detailed safety impact report has been prepared. This provided additional understanding of the DCLL blanket concept in preparation for the FNSF and DEMO. This paper will be a summary report on the progress of the DCLL TBM design and R&Ds for the DCLL blanket concept.« less

Recovery Systems Design Guide

DTIC Science & Technology

1978-12-01

analysis. retrieval parachute concepts are being investigated. The development of recovery systems for fast flying, possible out-of-control missiles proved...system. 21 •, . , r, _ . .. , . " , , . : . .. . " . , ,- Reference 32 suggests certain applications (speed/ Fast Opening. An emergency escape...operation, physiological aspect of flying and escape. fast parachute opening., Low Rate of Descent. A sea level rate of descent low parachute opening

The Emergence of Public Health Open Educational Resources

ERIC Educational Resources Information Center

Angell, C.; Hartwell, H.; Hemingway, A.

2011-01-01

Purpose: The purpose of this paper is to identify key concepts in the literature relating to the release of open educational resources (OER), with specific reference to the emergence of public health OER. Design/methodology/approach: A review of the literature relating to the development of OER was followed by an online search for OER literature…

NASA, The First 25 Years: 1958-83. A Resource for Teachers. A Curriculum Project.

ERIC Educational Resources Information Center

Thorne, Muriel M., Ed.

This book is designed to serve as a reference base from which teachers can develop classroom concepts and activities related to the National Aeronautics and Space Administration (NASA). The book consists of a prologue, ten chapters, an epilogue, and two appendices. The prologue contains a brief survey of the National Advisory Committee for…

Analyzing Science Activities in Force and Motion Concepts: A Design of an Immersion Unit

ERIC Educational Resources Information Center

Ayar, Mehmet C.; Aydeniz, Mehmet; Yalvac, Bugrahan

2015-01-01

In this paper, we analyze the science activities offered at 7th grade in the Turkish science and technology curriculum along with addressing the curriculum's original intent. We refer to several science education researchers' ideas, including Chinn & Malhotra's (Science Education, 86:175--218, 2002) theoretical framework and Edelson's (1998)…

Water Literacy in College Freshmen: Could a Cognitive Imagery Strategy Improve Understanding?

ERIC Educational Resources Information Center

Ewing, Margaret S.; Mills, Terence J.

1994-01-01

Presents a study designed to determine whether levels of water literacy differed between (n=83) college freshman nonscience majors having one versus two years of high school science coursework, visual imagery exercises could improve understanding of the water cycle, and patterns exist in the concept of the water cycle. (Contains 23 references.)…

When We Listen: Using Student Voices to Design Culturally Responsive and Just Schools

ERIC Educational Resources Information Center

Bunner, Teresa

2017-01-01

Teresa Bunner works as the high school literacy coordinating teacher for the Wake County (NC) Public School System in Raleigh. In this article she discusses the concept of Culturally Responsive teaching as a pedagogy that recognizes the importance of including students' cultural reference in all aspects of learning. She describes how she and her…

Teaching Strategies & Techniques for Adjunct Faculty. Third Edition. Higher Education Series.

ERIC Educational Resources Information Center

Greive, Donald

This booklet presents teaching strategies and techniques in a quick reference format. It was designed specifically to assist adjunct and part-time faculty, who have careers outside of education, to efficiently grasp many of the concepts necessary for effective teaching. Included are a checklist of points to review prior to beginning a teaching…

Drug development from the bench to the pharmacy: with special reference to dipeptidyl peptidase-4 inhibitor development.

PubMed

Carr, R D

2016-06-01

The dipeptidyl peptidase-4 (DPP-4) inhibitor concept is an example of prospective drug design and development based upon a distinct endocrine hypothesis. The design of enzyme inhibitors is a pragmatic approach to drug design; being compatible with the identification and optimization of small molecules that have properties commensurate with oral administration, as well as acceptable drug metabolism, distribution and elimination characteristics. Glucagon-like peptide 1 (GLP-1), a hormone with a spectrum of favourable metabolic actions, including glucose-dependent stimulation of insulin and inhibition of glucagon secretion, provided the endocrine basis from which the idea of using DPP-4 inhibitors as anti-diabetic agents was developed. The origin of the DPP-4 inhibitor concept was inspired by the angiotensin-converting enzyme inhibitor approach, which succeeded in establishing a class of extensively used therapeutic agents for the treatment of cardiovascular disorders. © 2016 Diabetes UK.

Imaging Exoplanets with the Exo-S Starshade Mission: Baseline Design

NASA Astrophysics Data System (ADS)

Cady, Eric; Lisman, Doug; Martin, Stefan; Scharf, Daniel; Shaklan, Stuart; Trabert, Rachel; Webb, David; Exo-S Science; Technology Definition Team, Exoplanet Program Probe Study Design Team

2015-01-01

Starshades suppress on-axis starlight to enable the direct imaging of exoplanets with non-specialized space telescopes of variable size. Even relatively small, commercially available telescopes are capable of imaging Earth-like planets in the habitable zone, and larger telescopes provide the capability to characterize planet atmospheres with increasing spectral resolution. We detail two options developed by the STDT for probe-class starshade missions (Exo-S): a co-launch of a starshade with a dedicated 1.1m telescope, and a standalone starshade to augment an existing large telescope such as WFIRST-AFTA. For these concepts, we describe the optical and mechanical design, the formation flying system, and the augmentations required to make a telescope 'starshade-ready'. We also lay out typical design reference missions for each and their scientific yield, and show both concepts have the capability to image terrestrial exoplanets orbiting nearby stars.

Evidence-based ergonomics: a model and conceptual structure proposal.

PubMed

Silveira, Dierci Marcio

2012-01-01

In Human Factors and Ergonomics Science (HFES), it is difficult to identify what is the best approach to tackle the workplace and systems design problems which needs to be solved, and it has been also advocated as transdisciplinary and multidisciplinary the issue of "How to solve the human factors and ergonomics problems that are identified?". The proposition on this study is to combine the theoretical approach for Sustainability Science, the Taxonomy of the Human Factors and Ergonomics (HFE) discipline and the framework for Evidence-Based Medicine in an attempt to be applied in Human Factors and Ergonomics. Applications of ontologies are known in the field of medical research and computer science. By scrutinizing the key requirements for the HFES structuring of knowledge, it was designed a reference model, First, it was identified the important requirements for HFES Concept structuring, as regarded by Meister. Second, it was developed an evidence-based ergonomics framework as a reference model composed of six levels based on these requirements. Third, it was devised a mapping tool using linguistic resources to translate human work, systems environment and the complexities inherent to their hierarchical relationships to support future development at Level 2 of the reference model and for meeting the two major challenges for HFES, namely, identifying what problems should be addressed in HFE as an Autonomous Science itself and proposing solutions by integrating concepts and methods applied in HFES for those problems.

Contextual Processing of Abstract Concepts Reveals Neural Representations of Non-Linguistic Semantic Content

PubMed Central

Wilson-Mendenhall, Christine D.; Simmons, W. Kyle; Martin, Alex; Barsalou, Lawrence W.

2014-01-01

Concepts develop for many aspects of experience, including abstract internal states and abstract social activities that do not refer to concrete entities in the world. The current study assessed the hypothesis that, like concrete concepts, distributed neural patterns of relevant, non-linguistic semantic content represent the meanings of abstract concepts. In a novel neuroimaging paradigm, participants processed two abstract concepts (convince, arithmetic) and two concrete concepts (rolling, red) deeply and repeatedly during a concept-scene matching task that grounded each concept in typical contexts. Using a catch trial design, neural activity associated with each concept word was separated from neural activity associated with subsequent visual scenes to assess activations underlying the detailed semantics of each concept. We predicted that brain regions underlying mentalizing and social cognition (e.g., medial prefrontal cortex, superior temporal sulcus) would become active to represent semantic content central to convince, whereas brain regions underlying numerical cognition (e.g., bilateral intraparietal sulcus) would become active to represent semantic content central to arithmetic. The results supported these predictions, suggesting that the meanings of abstract concepts arise from distributed neural systems that represent concept-specific content. PMID:23363408

Telescoping Solar Array Concept for Achieving High Packaging Efficiency

NASA Technical Reports Server (NTRS)

Mikulas, Martin; Pappa, Richard; Warren, Jay; Rose, Geoff

2015-01-01

Lightweight, high-efficiency solar arrays are required for future deep space missions using high-power Solar Electric Propulsion (SEP). Structural performance metrics for state-of-the art 30-50 kW flexible blanket arrays recently demonstrated in ground tests are approximately 40 kW/cu m packaging efficiency, 150 W/kg specific power, 0.1 Hz deployed stiffness, and 0.2 g deployed strength. Much larger arrays with up to a megawatt or more of power and improved packaging and specific power are of interest to mission planners for minimizing launch and life cycle costs of Mars exploration. A new concept referred to as the Compact Telescoping Array (CTA) with 60 kW/cu m packaging efficiency at 1 MW of power is described herein. Performance metrics as a function of array size and corresponding power level are derived analytically and validated by finite element analysis. Feasible CTA packaging and deployment approaches are also described. The CTA was developed, in part, to serve as a NASA reference solar array concept against which other proposed designs of 50-1000 kW arrays for future high-power SEP missions could be compared.

Designing an effective office brochure.

PubMed

Metzger, Michael Z

2003-01-01

The office brochure is an effective and comparatively inexpensive method for both internal and external marketing of your practice. With the advent of desktop publishing, almost anyone with a computer and a few hours can design, write, and edit the brochure. However to be successful, certain concepts such as color, paper weight, font, and layout must be understood. Once printed, a well-planned program for the use of the brochure can effectively promote the practice to the present and future patients, referring physicians, and insurance companies.

Development of an unmanned maritime system reference architecture

NASA Astrophysics Data System (ADS)

Duarte, Christiane N.; Cramer, Megan A.; Stack, Jason R.

2014-06-01

The concept of operations (CONOPS) for unmanned maritime systems (UMS) continues to envision systems that are multi-mission, re-configurable and capable of acceptable performance over a wide range of environmental and contextual variability. Key enablers for these concepts of operation are an autonomy module which can execute different mission directives and a mission payload consisting of re-configurable sensor or effector suites. This level of modularity in mission payloads enables affordability, flexibility (i.e., more capability with future platforms) and scalability (i.e., force multiplication). The modularity in autonomy facilitates rapid technology integration, prototyping, testing and leveraging of state-of-the-art advances in autonomy research. Capability drivers imply a requirement to maintain an open architecture design for both research and acquisition programs. As the maritime platforms become more stable in their design (e.g. unmanned surface vehicles, unmanned underwater vehicles) future developments are able to focus on more capable sensors and more robust autonomy algorithms. To respond to Fleet needs, given an evolving threat, programs will want to interchange the latest sensor or a new and improved algorithm in a cost effective and efficient manner. In order to make this possible, the programs need a reference architecture that will define for technology providers where their piece fits and how to successfully integrate. With these concerns in mind, the US Navy established the Unmanned Maritime Systems Reference Architecture (UMS-RA) Working Group in August 2011. This group consists of Department of Defense and industry participants working the problem of defining reference architecture for autonomous operations of maritime systems. This paper summarizes its efforts to date.

Deep Borehole Field Test Conceptual Design Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardin, Ernest L.

This report documents conceptual design development for the Deep Borehole Field Test (DBFT), including test packages (simulated waste packages, not containing waste) and a system for demonstrating emplacement and retrieval of those packages in the planned Field Test Borehole (FTB). For the DBFT to have demonstration value, it must be based on conceptualization of a deep borehole disposal (DBD) system. This document therefore identifies key options for a DBD system, describes an updated reference DBD concept, and derives a recommended concept for the DBFT demonstration. The objective of the DBFT is to confirm the safety and feasibility of the DBDmore » concept for long-term isolation of radioactive waste. The conceptual design described in this report will demonstrate equipment and operations for safe waste handling and downhole emplacement of test packages, while contributing to an evaluation of the overall safety and practicality of the DBD concept. The DBFT also includes drilling and downhole characterization investigations that are described elsewhere (see Section 1). Importantly, no radioactive waste will be used in the DBFT, nor will the DBFT site be used for disposal of any type of waste. The foremost performance objective for conduct of the DBFT is to demonstrate safe operations in all aspects of the test.« less

Thermal and hydraulic analysis of a cylindrical blanket module design for a tokamak reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, A.Y.

1978-10-01

Various existing blanket design concepts for a tokamak fusion reactor were evaluated and assessed. These included the demonstration power reactors of ORNL, GA and others. As a result of this study, a cylindrical, modularized blanket design concept was developed. The module is a double-walled, stainless steel 316 cylinder containing liquid lithium for tritium breeding and is cooled by pressurized helium. Steady state and transient thermal conditions under normal and some off-design conditions were analyzed and presented. At the steady state reference operating point the maximum structure temperature is 452/sup 0/C at the maximum stressed location and is 495/sup 0/C atmore » the less stressed location. The coolant inlet pressure is 54.4 atm, the inlet temperature is 200/sup 0/C and the exit temperature is 435/sup 0/C. The coolant could be utilized with a helium/steam turbine power conversion system with a cycle thermal efficiency of 30.8%.« less

Experimental study of the effects of flameholder geometry on emissions and performance of lean premixed combustors

NASA Technical Reports Server (NTRS)

Roffe, G.; Venkataramani, K. S.

1978-01-01

Emissions of NOx, CO, and unburned hydrocarbons (UHC) are reported for a lean premixed propane-air system at inlet conditions of 800K and 1MPa using twelve flameholder designs. The flameholders tested represent six design concepts with two values of blockage for each concept. Data were obtained at reference velocities of 35 m/s, 25 m/s and 20 m/s at combustor stations 10 cm and 30 cm downstream of the flameholders. Flameholder pressure drop was found to be a principal determinant of emissions performance. Designs producing larger pressure drops also produced less NOx, CO, and UHC emissions. The lean stability limit equivalence ratio was found to be approximately 0.35 for all designs. Flashback velocities (axial components in the flameholder passages) varied between 30 m/s and 40 m/s. A perforated plate flameholder was operated with a velocity as low as 23 m/s through the perforations at equivalence ratio 0.7 without producing flashback.

Design and development of automatic sharia compliant wheelchair wheels cleaner

NASA Astrophysics Data System (ADS)

Shaari, Muhammad Farid; Rasli, Ibrahim Ismail Mohammad; Jamaludin, M. Z. Z. Wan; Isa, W. A. Mohamad; M., H.; Rashid, A. H. Abdul

2017-04-01

Sharia compliant wheelchair wheel cleaner was developed in order to assist the muslim Person with Disabilities (PWD) to pray in the mosque without leaving their wheelchair because of the filthy wheels. Though there are many wheelchair wheel cleaning system in the market, it is very rare to find sharia compliant cleaning system that applies sertu concept which is one of the cleaning and purification technique in Islamic practice. The sertu concept is based on 6:1 ratio that refers to the six times pipe water cleaning and one time soiled water cleaning. The development process consists of design stage, fabrication and system installation stage and followed by testing stage. During the design stage, the proposed prototype underwent design brainstorming, operation programming and structural simulation analysis. Once fabricated, the cleaner prototype underwent was tested. The results showed that the prototype can cater load up to 100kg with 1.31×10-6 mm shaft bending displacement. The water ejection timing varied approximately 3% compared to the program.

Preliminary design method for deployable spacecraft beams

NASA Technical Reports Server (NTRS)

Mikulas, Martin M., Jr.; Cassapakis, Costas

1995-01-01

There is currently considerable interest in low-cost, lightweight, compactly packageable deployable elements for various future missions involving small spacecraft. These elements must also have a simple and reliable deployment scheme and possess zero or very small free-play. Although most small spacecraft do not experience large disturbances, very low stiffness appendages or free-play can couple with even small disturbances and lead to unacceptably large attitude errors which may involve the introduction of a flexible-body control system. A class of structures referred to as 'rigidized structures' offers significant promise in providing deployable elements that will meet these needs for small spacecraft. The purpose of this paper is to introduce several rigidizable concepts and to develop a design methodology which permits a rational comparison of these elements to be made with alternate concepts.

An Overview of a Trajectory-Based Solution for En Route and Terminal Area Self-Spacing: Sixth Revision

NASA Technical Reports Server (NTRS)

Abbott, Terence S.

2015-01-01

This paper presents an overview of the sixth revision to an algorithm specifically designed to support NASA's Airborne Precision Spacing concept. This algorithm is referred to as the Airborne Spacing for Terminal Arrival Routes version 13 (ASTAR13). This airborne self-spacing concept contains both trajectory-based and state-based mechanisms for calculating the speeds required to achieve or maintain a precise spacing interval. The trajectory-based capability allows for spacing operations prior to the aircraft being on a common path. This algorithm was also designed specifically to support a standalone, non-integrated implementation in the spacing aircraft. This current revision to the algorithm adds the state-based capability in support of evolving industry standards relating to airborne self-spacing.

Reference and Information Services: An Introduction. Second Edition. Library Science Text Series.

ERIC Educational Resources Information Center

Bopp, Richard E., Ed.; Smith, Linda C., Ed.

This document provides an overview of the concepts and processes behind reference services and the most important sources consulted in answering common reference questions. The book is divided into two parts. Part 1 deals with concepts and theory. It covers ethical aspects of reference service, the reference interview, the principles and goals of…

Waste Handling and Emplacement Options for Disposal of Radioactive Waste in Deep Boreholes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cochran, John R.; Hardin, Ernest

2015-11-01

Traditional methods cannot be used to handle and emplace radioactive wastes in boreholes up to 16,400 feet (5 km) deep for disposal. This paper describes three systems that can be used for handling and emplacing waste packages in deep borehole: (1) a 2011 reference design that is based on a previous study by Woodward–Clyde in 1983 in which waste packages are assembled into “strings” and lowered using drill pipe; (2) an updated version of the 2011 reference design; and (3) a new concept in which individual waste packages would be lowered to depth using a wireline. Emplacement on coiled tubingmore » was also considered, but not developed in detail. The systems described here are currently designed for U.S. Department of Energy-owned high-level waste (HLW) including the Cesium- 137/Strontium-90 capsules from the Hanford Facility and bulk granular HLW from fuel processing in Idaho.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qualls, A. L.; Brown, Nicholas R.; Betzler, Benjamin R.

The fluoride salt-cooled high-temperature reactor (FHR) demonstration reactor (DR) is a concept for a salt-cooled reactor with 100 megawatts of thermal output (MWt). It would use tristructural-isotropic (TRISO) particle fuel within prismatic graphite blocks. FLiBe (2 LiF-BeF 2) is the reference primary coolant. The FHR DR is designed to be small, simple, and affordable. Development of the FHR DR is a necessary intermediate step to enable near-term commercial FHRs. Lower risk technologies are purposely included in the initial FHR DR design to ensure that the reactor can be built, licensed, and operated within an acceptable budget and schedule. These technologiesmore » include TRISO particle fuel, replaceable core structural material, the use of that same material for the primary and intermediate loops, and tube-and-shell primary-to-intermediate heat exchangers. Several preconceptual and conceptual design efforts that have been conducted on FHR concepts bear a significant influence on the FHR DR design. Specific designs include the Oak Ridge National Laboratory (ORNL) advanced high-temperature reactor (AHTR) with 3400/1500 MWt/megawatts of electric output (MWe), as well as a 125 MWt small modular AHTR (SmAHTR) from ORNL. Other important examples are the Mk1 pebble bed FHR (PB-FHR) concept from the University of California, Berkeley (UCB), and an FHR test reactor design developed at the Massachusetts Institute of Technology (MIT). The MIT FHR test reactor is based on a prismatic fuel platform and is directly relevant to the present FHR DR design effort. These FHR concepts are based on reasonable assumptions for credible commercial prototypes. The FHR DR concept also directly benefits from the operating experience of the Molten Salt Reactor Experiment (MSRE), as well as the detailed design efforts for a large molten salt reactor concept and its breeder variant, the Molten Salt Breeder Reactor. The FHR DR technology is most representative of the 3400 MWt AHTR concept, and it will demonstrate key operational features of that design. The FHR DR will be closely scaled to the SmAHTR concept in power and flows, so any technologies demonstrated will be directly applicable to a reactor concept of that size. The FHR DR is not a commercial prototype design, but rather a DR that serves a cost and risk mitigation function for a later commercial prototype. It is expected to have a limited operational lifetime compared to a commercial plant. It is designed to be a low-cost reactor compared to more mature advanced prototype DRs. A primary reason to build the FHR DR is to learn about salt reactor technologies and demonstrate solutions to remaining technical gaps.« less

Alignment of the Stanford Linear Collider Arcs: Concepts and results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pitthan, R.; Bell, B.; Friedsam, H.

1987-02-01

The alignment of the Arcs for the Stanford Linear Collider at SLAC has posed problems in accelerator survey and alignment not encountered before. These problems come less from the tight tolerances of 0.1 mm, although reaching such a tight statistically defined accuracy in a controlled manner is difficult enough, but from the absence of a common reference plane for the Arcs. Traditional circular accelerators, including HERA and LEP, have been designed in one plane referenced to local gravity. For the SLC Arcs no such single plane exists. Methods and concepts developed to solve these and other problems, connected with themore » unique design of SLC, range from the first use of satellites for accelerator alignment, use of electronic laser theodolites for placement of components, computer control of the manual adjustment process, complete automation of the data flow incorporating the most advanced concepts of geodesy, strict separation of survey and alignment, to linear principal component analysis for the final statistical smoothing of the mechanical components.« less

Structural Materials and Fuels for Space Power Plants

NASA Technical Reports Server (NTRS)

Bowman, Cheryl; Busby, Jeremy; Porter, Douglas

2008-01-01

A fission reactor combined with Stirling convertor power generation is one promising candidate in on-going Fission Surface Power (FSP) studies for future lunar and Martian bases. There are many challenges for designing and qualifying space-rated nuclear power plants. In order to have an affordable and sustainable program, NASA and DOE designers want to build upon the extensive foundation in nuclear fuels and structural materials. This talk will outline the current Fission Surface Power program and outline baseline design options for a lunar power plant with an emphasis on materials challenges. NASA first organized an Affordable Fission Surface Power System Study Team to establish a reference design that could be scrutinized for technical and fiscal feasibility. Previous papers and presentations have discussed this study process in detail. Considerations for the reference design included that no significant nuclear technology, fuels, or material development were required for near term use. The desire was to build upon terrestrial-derived reactor technology including conventional fuels and materials. Here we will present an overview of the reference design, Figure 1, and examine the materials choices. The system definition included analysis and recommendations for power level and life, plant configuration, shielding approach, reactor type, and power conversion type. It is important to note that this is just one concept undergoing refinement. The design team, however, understands that materials selection and improvement must be an integral part of the system development.

Reference Communities: Applying the Community of Practice Concept to Development of Reference Knowledge

ERIC Educational Resources Information Center

Miller, Robin E.

2011-01-01

Communities of practice offer reference librarians a conceptual model through which to develop and maintain general and subject specific knowledge. Reference librarians acquire general and subject-specific knowledge in many ways, sometimes independently and sometimes collaboratively. Applying the concept of the "community of practice" to reference…

Chemical thermodynamic data. 1. The concept of links to the chemical elements and the historical development of key thermodynamic data [plus Supplementary Electronic Annex 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolery, Thomas J.; Jove Colon, Carlos F.

Chemical thermodynamic data remain a keystone for geochemical modeling and reactive transport simulation as applied to an increasing number of applications in the earth sciences, as well as applications in other areas including metallurgy, material science, and industrial process design. The last century has seen the development of a large body of thermodynamic data and a number of major compilations. The past several decades have seen the development of thermodynamic databases in digital form designed to support computer calculations. However, problems with thermodynamic data appear to be persistent. One problem pertains to the use of inconsistent primary key reference data.more » Such data pertain to elemental reference forms and key, stoichiometrically simple chemical species including metal oxides, CO 2, water, and aqueous species such as Na + and Cl -. A consistent set of primary key data (standard Gibbs energies, standard enthalpies, and standard entropies for key chemical species) for 298.15K and 1 bar pressure is essential. Thermochemical convention is to define the standard Gibbs energy and the standard enthalpy of an individual chemical species in terms of formation from reference forms of the constituent chemical elements. We propose a formal concept of “links” to the elemental reference forms. This concept involves a documented understanding of all reactions and calculations leading to values for a formation property (standard Gibbs energy or enthalpy). A valid link consists of two parts: (a) the path of reactions and corrections and (b) the associated data, which are key data. Such a link differs from a bare “key” or “reference” datum in that it requires additional information. Some or all of its associated data may also be key data. In evaluating a reported thermodynamic datum, one should identify the links to the chemical elements, a process which can be time-consuming and which may lead to a dead end (an incomplete link). The use of two or more inconsistent links to the same elemental reference form in a thermodynamic database will result in an inconsistency in the database. Thus, in constructing a database, it is important to establish a set of reliable links (generally resulting in a set of primary reference data) and then correct all data adopted subsequently for consistency with that set. Recommended values of key data have not been constant through history. We review some of this history through the lens of major compilations and other influential reports, and note a number of problem areas. Finally, we illustrate the concepts developed in this paper by applying them to some key species of geochemical interest, including liquid water; quartz and aqueous silica; and gibbsite, corundum, and the aqueous aluminum ion.« less

Chemical thermodynamic data. 1. The concept of links to the chemical elements and the historical development of key thermodynamic data [plus Supplementary Electronic Annex 2

DOE PAGES

Wolery, Thomas J.; Jove Colon, Carlos F.

2016-09-26

Chemical thermodynamic data remain a keystone for geochemical modeling and reactive transport simulation as applied to an increasing number of applications in the earth sciences, as well as applications in other areas including metallurgy, material science, and industrial process design. The last century has seen the development of a large body of thermodynamic data and a number of major compilations. The past several decades have seen the development of thermodynamic databases in digital form designed to support computer calculations. However, problems with thermodynamic data appear to be persistent. One problem pertains to the use of inconsistent primary key reference data.more » Such data pertain to elemental reference forms and key, stoichiometrically simple chemical species including metal oxides, CO 2, water, and aqueous species such as Na + and Cl -. A consistent set of primary key data (standard Gibbs energies, standard enthalpies, and standard entropies for key chemical species) for 298.15K and 1 bar pressure is essential. Thermochemical convention is to define the standard Gibbs energy and the standard enthalpy of an individual chemical species in terms of formation from reference forms of the constituent chemical elements. We propose a formal concept of “links” to the elemental reference forms. This concept involves a documented understanding of all reactions and calculations leading to values for a formation property (standard Gibbs energy or enthalpy). A valid link consists of two parts: (a) the path of reactions and corrections and (b) the associated data, which are key data. Such a link differs from a bare “key” or “reference” datum in that it requires additional information. Some or all of its associated data may also be key data. In evaluating a reported thermodynamic datum, one should identify the links to the chemical elements, a process which can be time-consuming and which may lead to a dead end (an incomplete link). The use of two or more inconsistent links to the same elemental reference form in a thermodynamic database will result in an inconsistency in the database. Thus, in constructing a database, it is important to establish a set of reliable links (generally resulting in a set of primary reference data) and then correct all data adopted subsequently for consistency with that set. Recommended values of key data have not been constant through history. We review some of this history through the lens of major compilations and other influential reports, and note a number of problem areas. Finally, we illustrate the concepts developed in this paper by applying them to some key species of geochemical interest, including liquid water; quartz and aqueous silica; and gibbsite, corundum, and the aqueous aluminum ion.« less

Materiales en Marcha Para El Esfuerzo Bilingue--Bicultural (Materials on the March for the Promotion of Bilingualism/Biculturalism), March 1973.

ERIC Educational Resources Information Center

San Diego City Schools, CA.

This newsletter is designed to promote the concept of bilingual-bicultural education. Included in this issue are articles on "Bilingual Education: Acceptance and Allocation,""A World History Reference,""History Teachers, Take Heart,""Social Studies Materials in Spanish," and "Pride of Aztlan." Articles appear in Spanish and English. Included is a…

Planning and Management Systems for State Programs of Vocational and Technical Education: An Application of Research.

ERIC Educational Resources Information Center

Nowrasteh, Daryush M.

This publication is designed to serve state-level planners interested in reviewing the key concepts of state planning and management systems. The compact nature of the review and its organization in guideline format should provide a ready reference for the practitioner seeking to develop and improve management systems for vocational education in…

The Concept of "English Learning Power" and Its Implication for the Design of English Curricula for Primary and Middle Schools in China

ERIC Educational Resources Information Center

Dai, Zhongxin

2015-01-01

In the research on "New Characteristics of Future Basic Education in China," Dina Pei formulates a "three-powered" model to theorize about the characteristics of future basic education in China. The three powers refer to the "Policy-making Power" of the local educational administration, the "Leading Power"…

Strapdown system redundancy management flight demonstration. [vertical takeoff and landing aircraft

NASA Technical Reports Server (NTRS)

1978-01-01

The suitability of strapdown inertial systems in providing highly reliable short-term navigation for vertical take-off and landing (VTOL) aircraft operating in an intra-urban setting under all-weather conditions was assessed. A preliminary design configuration of a skewed sensor inertial reference system employing a redundancy management concept to achieve fail-operational, fail-operational performance, was developed.

Sound[']s Right: Pupils' Responses to Heard Poetry and the Revised National Curriculum for English

ERIC Educational Resources Information Center

Gordon, John

2009-01-01

This article considers the design of poetry within the UK National Curriculum for English, where it is conceived of primarily as a print-based medium. With reference to curricular detail, the recent Ofsted survey of poetry teaching in schools, and to original research, it describes the role the existing curricular conception of poetry can play in…

Using Virtual Reality Computer Models to Support Student Understanding of Astronomical Concepts

ERIC Educational Resources Information Center

Barnett, Michael; Yamagata-Lynch, Lisa; Keating, Tom; Barab, Sasha A.; Hay, Kenneth E.

2005-01-01

The purpose of this study was to examine how 3-dimensional (3-D) models of the Solar System supported student development of conceptual understandings of various astronomical phenomena that required a change in frame of reference. In the course described in this study, students worked in teams to design and construct 3-D virtual reality computer…

Implications of Incessant Strike Actions on the Implementation of Technical Education Programme in Nigeria

ERIC Educational Resources Information Center

Adavbiele, J. A.

2015-01-01

This paper was designed to x-ray the implications of incessant strike actions on the implementation of Technical education programme in Nigeria. The paper took an exploratory view on the concept of strike actions in Nigeria with particular references on notable strike actions that have occurred in Nigeria. The types of strike were explained and…

The Aerial Regional-scale Environmental Survey (ARES) Mission to Mars

NASA Technical Reports Server (NTRS)

Levine, J. S.

2005-01-01

ARES is an exploration mission concept for an Aerial Regional-scale Environmental Survey of Mars designed to fly an instrumented platform over the surface of Mars at very low altitudes (1-3 km) for distances of hundreds to thousands of kilometers to obtain scientific data to address fundamental problems in Mars science. ARES helps to fill a gap in the scale and perspective of the Mars Exploration Program and addresses many key COMPLEX/MEPAG questions (e.g., nature and origin of crustal magnetic anomalies) not readily pursued in other parts of the exploration program. ARES supports the human exploration program through key environmental measurements and high-resolution contiguous data essential to reference mission design. Here we describe the major types of scientific goals, candidate instruments, and reference mission profiles.

Design for robustness of unique, multi-component engineering systems

NASA Astrophysics Data System (ADS)

Shelton, Kenneth A.

2007-12-01

The purpose of this research is to advance the science of conceptual designing for robustness in unique, multi-component engineering systems. Robustness is herein defined as the ability of an engineering system to operate within a desired performance range even if the actual configuration has differences from specifications within specified tolerances. These differences are caused by three sources, namely manufacturing errors, system degradation (operational wear and tear), and parts availability. Unique, multi-component engineering systems are defined as systems produced in unique or very small production numbers. They typically have design and manufacturing costs on the order of billions of dollars, and have multiple, competing performance objectives. Design time for these systems must be minimized due to competition, high manpower costs, long manufacturing times, technology obsolescence, and limited available manpower expertise. Most importantly, design mistakes cannot be easily corrected after the systems are operational. For all these reasons, robustness of these systems is absolutely critical. This research examines the space satellite industry in particular. Although inherent robustness assurance is absolutely critical, it is difficult to achieve in practice. The current state of the art for robustness in the industry is to overdesign components and subsystems with redundancy and margin. The shortfall is that it is not known if the added margins were either necessary or sufficient given the risk management preferences of the designer or engineering system customer. To address this shortcoming, new assessment criteria to evaluate robustness in design concepts have been developed. The criteria are comprised of the "Value Distance", addressing manufacturing errors and system degradation, and "Component Distance", addressing parts availability. They are based on an evolutionary computation format that uses a string of alleles to describe the components in the design concept. These allele values are unitless themselves, but map to both configuration descriptions and attribute values. The Value Distance and Component Distance are metrics that measure the relative differences between two design concepts using the allele values, and all differences in a population of design concepts are calculated relative to a reference design, called the "base design". The base design is the top-ranked member of the population in weighted terms of robustness and performance. Robustness is determined based on the change in multi-objective performance as Value Distance and Component Distance (and thus differences in design) increases. It is assessed as acceptable if differences in design configurations up to specified tolerances result in performance changes that remain within a specified performance range. The design configuration difference tolerances and performance range together define the designer's risk management preferences for the final design concepts. Additionally, a complementary visualization capability was developed, called the "Design Solution Topography". This concept allows the visualization of a population of design concepts, and is a 3-axis plot where each point represents an entire design concept. The axes are the Value Distance, Component Distance and Performance Objective. The key benefit of the Design Solution Topography is that it allows the designer to visually identify and interpret the overall robustness of the current population of design concepts for a particular performance objective. In a multi-objective problem, each performance objective has its own Design Solution Topography view. These new concepts are implemented in an evolutionary computation-based conceptual designing method called the "Design for Robustness Method" that produces robust design concepts. The design procedures associated with this method enable designers to evaluate and ensure robustness in selected designs that also perform within a desired performance range. The method uses an evolutionary computation-based procedure to generate populations of large numbers of alternative design concepts, which are assessed for robustness using the Value Distance, Component Distance and Design Solution Topography procedures. The Design for Robustness Method provides a working conceptual designing structure in which to implement and gain the benefits of these new concepts. In the included experiments, the method was used on several mathematical examples to demonstrate feasibility, which showed favorable results as compared to existing known methods. Furthermore, it was tested on a real-world satellite conceptual designing problem to illustrate the applicability and benefits to industry. Risk management insights were demonstrated for the robustness-related issues of manufacturing errors, operational degradation, parts availability, and impacts based on selections of particular types of components.

Digitally Milled Metal Framework for Fixed Complete Denture with Metal Occlusal Surfaces: A Design Concept.

PubMed

AlBader, Bader; AlHelal, Abdulaziz; Proussaefs, Periklis; Garbacea, Antonela; Kattadiyil, Mathew T; Lozada, Jaime

Implant-supported fixed complete dentures, often referred to as hybrid prostheses, have been associated with high implant survival rates but also with a high incidence of mechanical prosthetic complications. The most frequent of these complications have been fracture and wear of the veneering material. The proposed design concept incorporates the occlusal surfaces of the posterior teeth as part of a digital milled metal framework by designing the posterior first molars in full contour as part of the framework. The framework can be designed, scanned, and milled from a titanium blank using a milling machine. Acrylic resin teeth can then be placed on the framework by conventional protocol. The metal occlusal surfaces of the titanium-countered molars will be at centric occlusion. It is hypothesized that metal occlusal surfaces in the posterior region may reduce occlusal wear in these types of prostheses. When the proposed design protocol is followed, the connection between the metal frame and the cantilever part of the prosthesis is reinforced, which may lead to fewer fractures of the metal framework.

Dual Heat Pulse, Dual Layer Thermal Protection System Sizing Analysis and Trade Studies for Human Mars Entry Descent and Landing

NASA Technical Reports Server (NTRS)

McGuire, Mary Kathleen

2011-01-01

NASA has been recently updating design reference missions for the human exploration of Mars and evaluating the technology investments required to do so. The first of these started in January 2007 and developed the Mars Design Reference Architecture 5.0 (DRA5). As part of DRA5, Thermal Protection System (TPS) sizing analysis was performed on a mid L/D rigid aeroshell undergoing a dual heat pulse (aerocapture and atmospheric entry) trajectory. The DRA5 TPS subteam determined that using traditional monolithic ablator systems would be mass expensive. They proposed a new dual-layer TPS concept utilizing an ablator atop a low thermal conductivity insulative substrate to address the issue. Using existing thermal response models for an ablator and insulative tile, preliminary hand analysis of the dual layer concept at a few key heating points indicated that the concept showed potential to reduce TPS masses and warranted further study. In FY09, the followon Entry, Descent and Landing Systems Analysis (EDL-SA) project continued by focusing on Exploration-class cargo or crewed missions requiring 10 to 50 metric tons of landed payload. The TPS subteam advanced the preliminary dual-layer TPS analysis by developing a new process and updated TPS sizing code to rapidly evaluate mass-optimized, full body sizing for a dual layer TPS that is capable of dual heat pulse performance. This paper describes the process and presents the results of the EDL-SA FY09 dual-layer TPS analyses on the rigid mid L/D aeroshell. Additionally, several trade studies were conducted with the sizing code to evaluate the impact of various design factors, assumptions and margins.

Path to a UV/Optical/IR Flagship: Review of ATLAST and Its Predecessors

NASA Technical Reports Server (NTRS)

Thronson, Harley; Bolcar, Matthew R.; Clampin, Mark; Crooke, Julie; Feinberg, Lee; Oegerle, William; Rioux, Norman; Stahl, H. Philip; Stapelfeldt, Karl

2016-01-01

Our recently completed study for the Advanced Technology Large-Aperture Space Telescope (ATLAST) was the culmination of three years of initially internally funded work that built upon earlier engineering designs, science objectives, and technology priorities. Beginning in the mid-1980s, multiple teams of astronomers, technologists, and engineers developed concepts for a large-aperture UV/optical/IR space observatory intended to follow the Hubble Space Telescope (HST). Here, we summarize since the first significant conferences on major post-HST ultraviolet, optical, and infrared (UVOIR) observatories the history of designs, scientific goals, key technology recommendations, and community workshops. Although the sophistication of science goals and the engineering designs both advanced over the past three decades, we note the remarkable constancy of major characteristics of large post-HST UVOIR concepts. As it has been a priority goal for NASA and science communities for a half-century, and has driven much of the technology priorities for major space observatories, we include the long history of concepts for searching for Earth-like worlds. We conclude with a capsule summary of our ATLAST reference designs developed by four partnering institutions over the past three years, which was initiated in 2013 to prepare for the 2020 National Academies' Decadal Survey.

Fulfilling the law of a single independent variable and improving the result of mathematical educational research

NASA Astrophysics Data System (ADS)

Pardimin, H.; Arcana, N.

2018-01-01

Many types of research in the field of mathematics education apply the Quasi-Experimental method and statistical analysis use t-test. Quasi-experiment has a weakness that is difficult to fulfil “the law of a single independent variable”. T-test also has a weakness that is a generalization of the conclusions obtained is less powerful. This research aimed to find ways to reduce the weaknesses of the Quasi-experimental method and improved the generalization of the research results. The method applied in the research was a non-interactive qualitative method, and the type was concept analysis. Concepts analysed are the concept of statistics, research methods of education, and research reports. The result represented a way to overcome the weaknesses of quasi-Experiments and T-test. In addition, the way was to apply a combination of Factorial Design and Balanced Design, which the authors refer to as Factorial-Balanced Design. The advantages of this design are: (1) almost fulfilling “the low of single independent variable” so no need to test the similarity of the academic ability, (2) the sample size of the experimental group and the control group became larger and equal; so it becomes robust to deal with violations of the assumptions of the ANOVA test.

Extraction and Capture of Water from Martian Regolith Experimental Proof-of-Concept

NASA Technical Reports Server (NTRS)

Linne, Diane; Kleinhenz, Julie; Bauman, Steve; Johnson, Kyle

2016-01-01

Mars Design Reference Architecture 5.0:Lists in-situ resource utilization (ISRU) as enabling for robust human Mars missionsLO2LCH4 ascent propulsion 25,000 kg oxygen from atmosphere for ascent and life support Atmospheric based ISRU processes less operationally complex than surface based limited concept evaluation to date and Mars surface water property and distribution uncertainty would not allow [Mars soil water processing] to be base lined at this time Limited Concept Evaluation to Date Lunar regolith O2 extraction processing experience Lunar regolith is fluidized and heated to high temperatures with H2 to produce H2O from iron-bearing minerals Mars similarity concept: Soil placed in fluidized bed reactor Heated to moderate temperatures Inert gas flow used to fluidize the bed and help with water desorption Challenges: High-temperature dusty seals Working gas requires downstream separation and recycling to reduce consumables loss Batch process heating thermally inefficient.

Optimal Micro-Jet Flow Control for Compact Air Vehicle Inlets

NASA Technical Reports Server (NTRS)

Anderson, Bernhard H.; Miller, Daniel N.; Addington, Gregory A.; Agrell, Johan

2004-01-01

The purpose of this study on micro-jet secondary flow control is to demonstrate the viability and economy of Response Surface Methodology (RSM) to optimally design micro-jet secondary flow control arrays, and to establish that the aeromechanical effects of engine face distortion can also be included in the design and optimization process. These statistical design concepts were used to investigate the design characteristics of "low mass" micro-jet array designs. The term "low mass" micro-jet may refers to fluidic jets with total (integrated) mass flow ratios between 0.10 and 1.0 percent of the engine face mass flow. Therefore, this report examines optimal micro-jet array designs for compact inlets through a Response Surface Methodology.

Review of research on the health of caregiving grandparents.

PubMed

Grinstead, Linda Nicholson; Leder, Sharon; Jensen, Susan; Bond, Linda

2003-11-01

To provide a critical review of research literature on the health of grandparents raising grandchildren, and identify directions for future research. Approaches used to access the research studies for this review included a comprehensive search using relevant electronic databases and a thorough examination of the references in each published study. All studies but one were published after 1990. Samples consisted primarily of African-American and Caucasian grandmothers in the United States of America. Earlier studies tended to describe health and other related concepts while more recent studies began to examine relationships between concepts. Most of the studies had a cross-sectional design and only one evaluated interventions. Inconsistencies in the results of these studies were prevalent. Evaluation studies, longitudinal designs, and more varied study samples including cross-cultural comparisons are needed to advance knowledge about grandparent caregivers' health.

An Overview of a Trajectory-Based Solution for En Route and Terminal Area Self-Spacing: Seventh Revision

NASA Technical Reports Server (NTRS)

Abbott, Terence S.

2015-01-01

This paper presents an overview of the seventh revision to an algorithm specifically designed to support NASA's Airborne Precision Spacing concept. This paper supersedes the previous documentation and presents a modification to the algorithm referred to as the Airborne Spacing for Terminal Arrival Routes version 13 (ASTAR13). This airborne self-spacing concept contains both trajectory-based and state-based mechanisms for calculating the speeds required to achieve or maintain a precise spacing interval. The trajectory-based capability allows for spacing operations prior to the aircraft being on a common path. This algorithm was also designed specifically to support a standalone, non-integrated implementation in the spacing aircraft. This current revision to the algorithm adds the state-based capability in support of evolving industry standards relating to airborne self-spacing.

An Overview of a Trajectory-Based Solution for En Route and Terminal Area Self-Spacing: Eighth Revision

NASA Technical Reports Server (NTRS)

Abbott, Terence S.; Swieringa, Kurt S.

2017-01-01

This paper presents an overview of the eighth revision to an algorithm specifically designed to support NASA's Airborne Precision Spacing concept. This paper supersedes the previous documentation and presents a modification to the algorithm referred to as the Airborne Spacing for Terminal Arrival Routes version 13 (ASTAR13). This airborne self-spacing concept contains both trajectory-based and state-based mechanisms for calculating the speeds required to achieve or maintain a precise spacing interval with another aircraft. The trajectory-based capability allows for spacing operations prior to the aircraft being on a common path. This algorithm was also designed specifically to support a standalone, non-integrated implementation in the spacing aircraft. This current revision to the algorithm supports the evolving industry standards relating to airborne self-spacing.

Design Concept for a Minimal Volume Spacecraft Cabin to Serve as a Mars Ascent Vehicle Cabin and Other Alternative Pressurized Vehicle Cabins

NASA Technical Reports Server (NTRS)

Howard, Robert L., Jr.

2016-01-01

The Evolvable Mars Campaign is developing concepts for human missions to the surface of Mars. These missions are round-trip expeditions, thereby requiring crew launch via a Mars Ascent Vehicle (MAV). A study to identify the smallest possible pressurized cabin for this mission has developed a conceptual vehicle referred to as the minimal MAV cabin. The origin of this concept will be discussed as well as its initial concept definition. This will lead to a description of possible configurations to integrate the minimal MAV cabin with ascent vehicle engines and propellant tanks. Limitations of this concept will be discussed, in particular those that argue against the use of the minimal MAV cabin to perform the MAV mission. However, several potential alternative uses for the cabin are identified. Finally, recommended forward work will be discussed, including current work in progress to develop a full scale mockup and conduct usability evaluations.

A logical foundation for representation of clinical data.

PubMed Central

Campbell, K E; Das, A K; Musen, M A

1994-01-01

OBJECTIVE: A general framework for representation of clinical data that provides a declarative semantics of terms and that allows developers to define explicitly the relationships among both terms and combinations of terms. DESIGN: Use of conceptual graphs as a standard representation of logic and of an existing standardized vocabulary, the Systematized Nomenclature of Medicine (SNOMED International), for lexical elements. Concepts such as time, anatomy, and uncertainty must be modeled explicitly in a way that allows relation of these foundational concepts to surface-level clinical descriptions in a uniform manner. RESULTS: The proposed framework was used to model a simple radiology report, which included temporal references. CONCLUSION: Formal logic provides a framework for formalizing the representation of medical concepts. Actual implementations will be required to evaluate the practicality of this approach. PMID:7719805

Design Technology of Advanced Composites.

DTIC Science & Technology

1982-11-01

Communications A.146 Figure 2.-- Conceptual Structure of the Fundamental Protocol Building Block A.147 Figure 3.--External Interactions Associated with a...compatibility between 1544 and 2048 kbit/s system. Annex 5 contains a description of the proposed framwork for distribution to other Study Groups. Some of...are conceptual configurations useful in identifying various possible arrangements to an ISDN. Two concepts are used in defining reference configurations

TLOG: Training and Educating Operational Logistic Planners

DTIC Science & Technology

2008-05-22

monograph recommends specific changes to the current curriculum. Additions in operational knowledge provide the students technical knowledge and a...common frame of reference in campaign planning. The changes result in students not only technically competent to design a concept of support, but...planning process. The implementation of these changes enhance TLog’s curriculum to meet the course’s stated goal; the graduates will be the

Feasibility evaluation and study of adapting the attitude reference system to the Orbiter camera payload system's large format camera

NASA Technical Reports Server (NTRS)

1982-01-01

A design concept that will implement a mapping capability for the Orbital Camera Payload System (OCPS) when ground control points are not available is discussed. Through the use of stellar imagery collected by a pair of cameras whose optical axis are structurally related to the large format camera optical axis, such pointing information is made available.

USMC Logistics Resource Allocation Optimization Tool

DTIC Science & Technology

2015-12-01

Virtual Warehouse Concept ..........................................12  3.  New Models in Logistics Network Design and Implications for Third Party...is the smallest DD activity in terms of manpower , but due to its proximity to USMC units, stocks a much greater quantity of USMC-demanded materiel...salient conclusion to reference with respect to this thesis. 12 2. Inventory Management of Repairables in the U.S. Marine Corps— A Virtual Warehouse

Optical Air Flow Measurements in Flight

NASA Technical Reports Server (NTRS)

Bogue, Rodney K.; Jentink, Henk W.

2004-01-01

This document has been written to assist the flight-test engineer and researcher in using optical flow measurements in flight applications. The emphasis is on describing tradeoffs in system design to provide desired measurement performance as currently understood. Optical system components are discussed with examples that illustrate the issues. The document concludes with descriptions of optical measurement systems designed for a variety of applications including aeronautics research, airspeed measurement, and turbulence hazard detection. Theoretical discussion is minimized, but numerous references are provided to supply ample opportunity for the reader to understand the theoretical underpinning of optical concepts.

An algorithm for control system design via parameter optimization. M.S. Thesis

NASA Technical Reports Server (NTRS)

Sinha, P. K.

1972-01-01

An algorithm for design via parameter optimization has been developed for linear-time-invariant control systems based on the model reference adaptive control concept. A cost functional is defined to evaluate the system response relative to nominal, which involves in general the error between the system and nominal response, its derivatives and the control signals. A program for the practical implementation of this algorithm has been developed, with the computational scheme for the evaluation of the performance index based on Lyapunov's theorem for stability of linear invariant systems.

ANOPP programmer's reference manual for the executive System. [aircraft noise prediction program

NASA Technical Reports Server (NTRS)

Gillian, R. E.; Brown, C. G.; Bartlett, R. W.; Baucom, P. H.

1977-01-01

Documentation for the Aircraft Noise Prediction Program as of release level 01/00/00 is presented in a manual designed for programmers having a need for understanding the internal design and logical concepts of the executive system software. Emphasis is placed on providing sufficient information to modify the system for enhancements or error correction. The ANOPP executive system includes software related to operating system interface, executive control, and data base management for the Aircraft Noise Prediction Program. It is written in Fortran IV for use on CDC Cyber series of computers.

LDRD Final Report: Advanced Hohlraum Concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, Ogden S.

Indirect drive inertial confinement fusion (ICF) experiments to date have mostly used cylindrical, laser-heated, gas-filled hohlraums to produce the radiation drive needed to symmetrically implode DT-filled fusion capsules. These hohlraums have generally been unable to produce a symmetric radiation drive through the end of the desired drive pulse, and are plagued with complications due to laser-plasma interactions (LPI) that have made it difficult to predict their performance. In this project we developed several alternate hohlraum concepts. These new hohlraums utilize different hohlraum geometries, radiation shields, and foam materials in an attempt to improve performance relative to cylindrical hohlraums. Each alternatemore » design was optimized using radiation hydrodynamic (RH) design codes to implode a reference DT capsule with a high-density carbon (HDC) ablator. The laser power and energy required to produce the desired time-dependent radiation drive, and the resulting time-dependent radiation symmetry for each new concept were compared to the results for a reference cylindrical hohlraum. Since several of the new designs needed extra laser entrance holes (LEHs), techniques to keep small LEHs open longer, including high-Z foam liners and low-Z wires at the LEH axis, were investigated numerically. Supporting experiments and target fabrication efforts were also done as part of this project. On the Janus laser facility plastic tubes open at one end (halfraums) and filled with SiO 2 or Ta 2O 5 foam were heated with a single 2w laser. Laser propagation and backscatter were measured. Generally the measured propagation was slower than calculated, and the measured laser backscatter was less than calculated. A comparable, scaled up experiment was designed for the NIF facility and four targets were built. Since low density gold foam was identified as a desirable material for lining the LEH and the hohlraum wall, a technique was developed to produce 550 mg/cc gold foam, and a sample of this material was successfully manufactured.« less

Fault Tolerant Design Concepts for Highly Integrated Flight Critical Guidance and Control Systems: Conference Proceedings Held at the Guidance and Control Panel Symposium (49th) Held in Toulouse, France on 10-13 October 1989

DTIC Science & Technology

1990-04-01

conception des postes de pilotage et les r6les des pilotes doivent itre difinis avec soin en face des tiches automatis6es ainsi que les pcifications de...from USA and Canada: Commandant M.Mouhamad. FAF AGARD-NATO Executive, GCP Attention : GCP Executive AGARD-OTAN APO New York 09777 7 rue Ancelle F-92200...G.Manfeld 54 UN SYSTEME DE REFERENCES PRIMAIRES DE HAUTE INTEGRITE (A High Integrity Flight Data System) par J.L.Roch et J.Contet 55 ..... 4- K- ’-I

Human Genetics and Islam: Scientific and Medical Aspects

PubMed Central

Ghareeb, Bilal A.A.

2011-01-01

Objective: To relate diverse aspects of genetics and its applications to concepts in the Glorious Qur’an and the ḥadīth. Study Design: The author compared passages from the Glorious Qur’an and ḥadīth with modern concepts in genetics, such as recessive inheritance, genetic counseling, genetic variation, cytoplasmic inheritance, sex chromosomes, genetics-environment interactions, gender determination, and the hypothesis of “pairing in the universe.” Conclusions: A fresh understanding of Islamic scripture reveals references to principles of genetics that predate contemporary discoveries. This highlights the need for further exploration of possible links between science and religion. PMID:23610491

How to successfully implement extended producer responsibility: considerations from an economic point of view.

PubMed

Wiesmeth, Hans; Häckl, Dennis

2011-09-01

This paper investigates the concept of extended producer responsibility (EPR) from an economic point of view. Particular importance will be placed on the concept of 'economic feasibility' of an EPR policy, which should guide decision-making in this context. Moreover, the importance of the core EPR principle of 'integrating signals throughout the product chain' into the incentive structure will be demonstrated with experiences from Germany. These examples refer to sales packaging consumption, refillable drinks packages and waste electrical and electronic equipment collection. As a general conclusion, the interaction between economic principles and technological development needs to be observed carefully when designing incentive-compatible EPR policies.

Design for disassembly and sustainability assessment to support aircraft end-of-life treatment

NASA Astrophysics Data System (ADS)

Savaria, Christian

Gas turbine engine design is a multidisciplinary and iterative process. Many design iterations are necessary to address the challenges among the disciplines. In the creation of a new engine architecture, the design time is crucial in capturing new business opportunities. At the detail design phase, it was proven very difficult to correct an unsatisfactory design. To overcome this difficulty, the concept of Multi-Disciplinary Optimization (MDO) at the preliminary design phase (Preliminary MDO or PMDO) is used allowing more freedom to perform changes in the design. PMDO also reduces the design time at the preliminary design phase. The concept of PMDO was used was used to create parametric models, and new correlations for high pressure gas turbine housing and shroud segments towards a new design process. First, dedicated parametric models were created because of their reusability and versatility. Their ease of use compared to non-parameterized models allows more design iterations thus reduces set up and design time. Second, geometry correlations were created to minimize the number of parameters used in turbine housing and shroud segment design. Since the turbine housing and the shroud segment geometries are required in tip clearance analyses, care was taken as to not oversimplify the parametric formulation. In addition, a user interface was developed to interact with the parametric models and improve the design time. Third, the cooling flow predictions require many engine parameters (i.e. geometric and performance parameters and air properties) and a reference shroud segments. A second correlation study was conducted to minimize the number of engine parameters required in the cooling flow predictions and to facilitate the selection of a reference shroud segment. Finally, the parametric models, the geometry correlations, and the user interface resulted in a time saving of 50% and an increase in accuracy of 56% in the new design system compared to the existing design system. Also, regarding the cooling flow correlations, the number of engine parameters was reduced by a factor of 6 to create a simplified prediction model and hence a faster shroud segment selection process. None

Study Navigator: An Algorithmically Generated Aid for Learning from Electronic Textbooks

ERIC Educational Resources Information Center

Agrawal, Rakesh; Gollapudi, Sreenivas; Kannan, Anitha; Kenthapadi, Krishnaram

2014-01-01

We present "study navigator," an algorithmically-generated aid for enhancing the experience of studying from electronic textbooks. The study navigator for a section of the book consists of helpful "concept references" for understanding this section. Each concept reference is a pair consisting of a concept phrase explained…

Framework Design of Unified Cross-Authentication Based on the Fourth Platform Integrated Payment

NASA Astrophysics Data System (ADS)

Yong, Xu; Yujin, He

The essay advances a unified authentication based on the fourth integrated payment platform. The research aims at improving the compatibility of the authentication in electronic business and providing a reference for the establishment of credit system by seeking a way to carry out a standard unified authentication on a integrated payment platform. The essay introduces the concept of the forth integrated payment platform and finally put forward the whole structure and different components. The main issue of the essay is about the design of the credit system of the fourth integrated payment platform and the PKI/CA structure design.

Barrier-free design: a review and critique of the occupational therapy perspective.

PubMed

Cooper, B A; Cohen, U; Hasselkus, B R

1991-04-01

This review of the occupational therapy literature on barrier-free design identifies both a paucity of related occupational therapy research on the topic and a lack of a common conceptual base with which to guide the development and use of environmental assessments. Nonetheless, two fledgling themes can be extrapolated: the consistent reference to the concepts of accessibility, mobility, function, and safety and an increased awareness among occupational therapists regarding the accessibility standards developed by the American National Standards Institute (ANSI) (ANSI, 1971, 1980). A problem-solving model suggested by designers for the 1979 revision of ANSI standards that incorporates these conceptual themes is described and discussed.

Status and Path Forward for the Large Ultraviolet Optical Infrared Surveyor (LUVOIR) Mission Concept Study

NASA Technical Reports Server (NTRS)

Crooke, Julie A.; Roberge, Aki; Domagal-Goldman, Shawn D.; Mandell, Avram M.; Bolcar, Matthew R.; Rioux, Norman M.; Perez, Mario R.; Smith, Erin C.

2016-01-01

In preparation of the 2020 Astrophysics Decadal Survey, National Aeronautics and Space Administration (NASA) has commenced a process for the astronomical community to study several large mission concepts leveraging the lessons learned from past Decadal Surveys. This will enable the Decadal Survey committee to make more informed recommendations to NASA on its astrophysics science and mission priorities with respect to cost and risk. Four astrophysics large mission concepts were identified. Each of them had a Science and Technology Definition Teem(STDT) chartered to produce scientifically compelling, feasible, and executable design reference mission (DRM)concepts to present to the 2020 Decadal Survey. In addition, The Aerospace Corporation will perform an independent cost and technical evaluation (CATE) of each of these mission concept studies in advance of the 2020 Decadal Survey by interacting with the STDTs to provide detailed technical details on certain areas for which deep dives are appropriate. This paper presents the status and path forward for one of the four large mission concepts, namely, the Large UltraViolet, Optical, InfraRed surveyor (LUVOIR).

Status and path forward for the large ultraviolet/optical/infrared surveyor (LUVOIR) mission concept study

NASA Astrophysics Data System (ADS)

Crooke, Julie A.; Roberge, Aki; Domagal-Goldman, Shawn D.; Mandell, Avi M.; Bolcar, Matthew R.; Rioux, Norman M.; Perez, Mario R.; Smith, Erin C.

2016-07-01

In preparation of the 2020 Astrophysics Decadal Survey, National Aeronautics and Space Administration (NASA) has commenced a process for the astronomical community to study several large mission concepts leveraging the lessons learned from past Decadal Surveys. This will enable the Decadal Survey committee to make more informed recommendations to NASA on its astrophysics science and mission priorities with respect to cost and risk. Four astrophysics large mission concepts were identified. Each of them had a Science and Technology Definition Teem (STDT) chartered to produce scientifically compelling, feasible, and executable design reference mission (DRM) concepts to present to the 2020 Decadal Survey. In addition, The Aerospace Corporation will perform an independent cost and technical evaluation (CATE) of each of these mission concept studies in advance of the 2020 Decadal Survey, by interacting with the STDTs to provide detailed technical details on certain areas for which "deep dives" are appropriate. This paper presents the status and path forward for one of the four large mission concepts, namely, the Large UltraViolet, Optical, InfraRed surveyor (LUVOIR).

Lunar lander and return propulsion system trade study

NASA Technical Reports Server (NTRS)

Hurlbert, Eric A.; Moreland, Robert; Sanders, Gerald B.; Robertson, Edward A.; Amidei, David; Mulholland, John

1993-01-01

This trade study was initiated at NASA/JSC in May 1992 to develop and evaluate main propulsion system alternatives to the reference First Lunar Outpost (FLO) lander and return-stage transportation system concept. Thirteen alternative configurations were developed to explore the impacts of various combinations of return stage propellants, using either pressure or pump-fed propulsion systems and various staging options. Besides two-stage vehicle concepts, the merits of single-stage and stage-and-a-half options were also assessed in combination with high-performance liquid oxygen and liquid hydrogen propellants. Configurations using an integrated modular cryogenic engine were developed to assess potential improvements in packaging efficiency, mass performance, and system reliability compared to non-modular cryogenic designs. The selection process to evaluate the various designs was the analytic hierarchy process. The trade study showed that a pressure-fed MMH/N2O4 return stage and RL10-based lander stage is the best option for a 1999 launch. While results of this study are tailored to FLO needs, the design date, criteria, and selection methodology are applicable to the design of other crewed lunar landing and return vehicles.

A stellar tracking reference system

NASA Technical Reports Server (NTRS)

Klestadt, B.

1971-01-01

A stellar attitude reference system concept for satellites was studied which promises to permit continuous precision pointing of payloads with accuracies of 0.001 degree without the use of gyroscopes. It is accomplished with the use of a single, clustered star tracker assembly mounted on a non-orthogonal, two gimbal mechanism, driven so as to unwind satellite orbital and orbit precession rates. A set of eight stars was found which assures the presence of an adequate inertial reference on a continuous basis in an arbitrary orbit. Acquisition and operational considerations were investigated and inherent reference redundancy/reliability was established. Preliminary designs for the gimbal mechanism, its servo drive, and the star tracker cluster with its associated signal processing were developed for a baseline sun-synchronous, noon-midnight orbit. The functions required of the onboard computer were determined and the equations to be solved were found. In addition detailed error analyses were carried out, based on structural, thermal and other operational considerations.

Reference Gauging System for a Small-Scale Liquid Hydrogen Tank

NASA Technical Reports Server (NTRS)

VanDresar, Neil T.; Siegwarth, James D.

2003-01-01

A system to accurately weigh the fluid contents of a small-scale liquid hydrogen test tank has been experimentally verified. It is intended for use as a reference or benchmark system when testing lowgravity liquid quantity gauging concepts in the terrestrial environment. The reference gauging system has shown a repeatable measurement accuracy of better than 0.5 percent of the full tank liquid weight. With further refinement, the system accuracy can be improved to within 0.10 percent of full scale. This report describes the weighing system design, calibration, and operational results. Suggestions are given for further refinement of the system. An example is given to illustrate additional sources of uncertainty when mass measurements are converted to volume equivalents. Specifications of the companion test tank and its multi-layer insulation system are provided.

A Performance Assessment of Eight Low-Boom High-Speed Civil Transport Concepts

NASA Technical Reports Server (NTRS)

Baize, Daniel G.; McElroy, Marcus O.; Fenbert, James A.; Coen, Peter G.; Ozoroski, Lori P.; Domack, Chris S.; Needleman, Kathy E.; Geiselhart, Karl A.

1999-01-01

A performance assessment of eight low-boom high speed civil transport (HSCT) configurations and a reference HSCT configuration has been performed. Although each of the configurations was designed with different engine concepts, for consistency, a year 2005 technology, 0.4 bypass ratio mixed-flow turbofan (MFTF) engine was used for all of the performance assessments. Therefore, all original configuration nacelles were replaced by a year 2005 MFRF nacelle design which corresponds to the engine deck utilized. The engine thrust level was optimized to minimize vehicle takeoff gross weight. To preserve the configuration's sonic-boom shaping, wing area was not optimized or altered from its original design value. Performance sizings were completed when possible for takeoff balanced field lengths of 11,000 ft and 12,000 ft, not considering FAR Part 36 Stage III noise compliance. Additionally, an arbitrary sizing with thrust-to-weight ratio equal to 0.25 was performed, enabling performance levels to be compared independent of takeoff characteristics. The low-boom configurations analyzed included designs from the Boeing Commercial Airplane Group, Douglas Aircraft Company, Ames Research Center, and Langley Research Center. This paper discusses the technology level assumptions, mission profile, analysis methodologies, and the results of the assessment. The results include maximum lift-to-drag ratios, total fuel consumption, number of passengers, optimum engine sizing plots, takeoff performance, mission block time, and takeoff gross weight for all configurations. Results from the low-boom configurations are also compared with a non-low-boom reference configuration. Configuration dependent advantages or deficiencies are discussed as warranted.

Motorcycle helmets--a state of the art review.

PubMed

Fernandes, F A O; Alves de Sousa, R J

2013-07-01

This paper tries to make an overview of the work carried out by scientific community in the area of road helmets safety. In an area that is constantly being pushed forward by market competition, self-awareness of danger and tighter standards, several research groups around the world have contributed to safety gear improvement. In this work concepts related to head impact protection and energy absorption are explained. It also makes reference to the theories related to the development of helmets, as well as to the different existing types nowadays. The materials that are typically used in impact situations and new design concepts are also approached. In addition, it is presented a literature review of current--and most commonly used--helmet test standards, along with new tests and helmet concepts to assess the effects of rotational motion. In a non-restrictive, and never up-to-date report, a state-of-art review on road helmets safety is done, with a special insight into brain injury, helmet design and standards. Copyright © 2013 Elsevier Ltd. All rights reserved.

Active heat exchange system development for latent heat thermal energy storage

NASA Technical Reports Server (NTRS)

Alario, J.; Kosson, R.; Haslett, R.

1980-01-01

Various active heat exchange concepts were identified from among three generic categories: scrapers, agitators/vibrators and slurries. The more practical ones were given a more detailed technical evaluation and an economic comparison with a passive tube-shell design for a reference application (300 MW sub t storage for 6 hours). Two concepts were selected for hardware development: (1) a direct contact heat exchanger in which molten salt droplets are injected into a cooler counterflowing stream of liquid metal carrier fluid, and (2) a rotating drum scraper in which molten salt is sprayed onto the circumference of a rotating drum, which contains the fluid salt is sprayed onto the circumference of a rotating drum, which contains the fluid heat sink in an internal annulus near the surface. A fixed scraper blade removes the solidified salt from the surface which was nickel plated to decrease adhesion forces. In addition to improving performance by providing a nearly constant transfer rate during discharge, these active heat exchanger concepts were estimated to cost at least 25% less than the passive tube-shell design.

The LIFE Laser Design in Context: A Comparison to the State-of-the-Art

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deri, R J; Bayramian, A J; Erlandson, A C

2011-03-21

The current point design for the LIFE laser leverages decades of solid-state laser development in order to achieve the performance and attributes required for inertial fusion energy. This document provides a brief comparison of the LIFE laser point design to other state-of-the-art solid-state lasers. Table I compares the attributes of the current LIFE laser point design to other systems. the state-of-the-art for single-shot performance at fusion-relevant beamline energies is exemplified by performance observed on the National Ignition Facility. The state-of-the-art for high average power is exemplified by the Northrup Grumman JHPSSL laser. Several items in Table I deal with themore » laser efficiency; a more detailed discussion of efficiency can be found in reference 5. The electrical-to-optical efficiency of the LIFE design exceeds that of reference 4 due to the availability of higher efficiency laser diode pumps (70% vs. {approx}50% used in reference 4). LIFE diode pumps are discussed in greater detail in reference 6. The 'beam steering' state of the art is represented by the deflection device that will be used in the LIFE laser, not a laser system. Inspection of Table I shows that most LIFE laser attributes have already been experimentally demonstrated. The two cases where the LIFE design is somewhat better than prior experimental work do not involve the development of new concepts: beamline power is increased simply by increasing aperture (as demonstrated by the power/aperture comparison in Table I), and efficiency increases are achieved by employing state-of-the-art diode pumps. In conclusion, the attributes anticipated for the LIFE laser are consistent with the demonstrated performance of existing solid-state lasers.« less

Innovative design method of automobile profile based on Fourier descriptor

NASA Astrophysics Data System (ADS)

Gao, Shuyong; Fu, Chaoxing; Xia, Fan; Shen, Wei

2017-10-01

Aiming at the innovation of the contours of automobile side, this paper presents an innovative design method of vehicle side profile based on Fourier descriptor. The design flow of this design method is: pre-processing, coordinate extraction, standardization, discrete Fourier transform, simplified Fourier descriptor, exchange descriptor innovation, inverse Fourier transform to get the outline of innovative design. Innovative concepts of the innovative methods of gene exchange among species and the innovative methods of gene exchange among different species are presented, and the contours of the innovative design are obtained separately. A three-dimensional model of a car is obtained by referring to the profile curve which is obtained by exchanging xenogeneic genes. The feasibility of the method proposed in this paper is verified by various aspects.

Virtual Prototyping: Concept to Production

DTIC Science & Technology

1994-03-01

element analysis. Meshing refers to the gen - following page. The FEA enables designers to eration of nodal coordinates and elements evaluate complex...pants. It is not acceptable to have one weapon technology. This is especially true when gen - system believe it is concealed by a terrain fea- erating...conducted by Gen - process there is ample opportunity to utilize eral Paul F Gorman, USA (Ret.), who led the virtual prototyping and simulation to en

A New Approach for the Design and Evaluation of Land Defense Concepts,

DTIC Science & Technology

1991-01-01

18. Theater-strategic situation in southern USSR, December 1942 ............. 84 19. 11th Panzer division’s activities in the Chir River battles...early December 1942 ................................................. 85 20. 11th Panzer division’s activities in the Chir River battles, mid-December...activity distributions in mind. Such reference values might come from historical studies (such as the Chir River example described below), map studies

Lift cruise fan V/STOL aircraft conceptual design study T-39 modification. Volume 1: Technical report

NASA Technical Reports Server (NTRS)

Elliott, D. W.

1976-01-01

The conversion of two T-39 aircraft into lift cruise fan research and technology vehicles is discussed. The concept is based upon modifying the T-39A (NA265-40) Sabreliner airframe into a V/STOL configuration by incorporating two LCF-459 lift cruise fans and three YJ-97 gas generators. The propulsion concept provides the thrust for horizontal flight or lift for vertical flight by deflection of bifurcated nozzles while maintaining engine out safety throughout the flight envelope. The configuration meets all the study requirements specified for the design with control powers in VTOL and conversion in excess of the requirement making it an excellent vehicle for research and development. The study report consists of two volumes; Volume 1 (Reference a) contains background data detailed description and technical substantiation of the aircraft. Volume 2 includes cost data, scheduling and program planning not addressed in Volume 1.

An Overview of a Trajectory-Based Solution for En Route and Terminal Area Self-Spacing: Fifth Edition

NASA Technical Reports Server (NTRS)

Abbott, Terence S.

2015-01-01

This paper presents an overview of the fifth revision to an algorithm specifically designed to support NASA's Airborne Precision Spacing concept. This algorithm is referred to as the Airborne Spacing for Terminal Arrival Routes version 12 (ASTAR12). This airborne self-spacing concept is trajectory-based, allowing for spacing operations prior to the aircraft being on a common path. Because this algorithm is trajectory-based, it also has the inherent ability to support required-time-of- arrival (RTA) operations. This algorithm was also designed specifically to support a standalone, non-integrated implementation in the spacing aircraft. This current revision to the algorithm includes a ground speed feedback term to compensate for slower than expected traffic aircraft speeds based on the accepted air traffic control tendency to slow aircraft below the nominal arrival speeds when they are farther from the airport.

A Case Study in High Contrast Coronagraph for Planet Discovery: The Eclipse Concept and Support Laboratory Experience

NASA Technical Reports Server (NTRS)

Trauger, John T.

2005-01-01

Eclipse is a proposed NASA Discovery mission to perform a sensitive imaging survey of nearby planetary systems, including a survey for jovian-sized planets orbiting Sun-like stars to distances of 15 pc. We outline the science objectives of the Eclipse mission and review recent developments in the key enabling technologies. Eclipse is a space telescope concept for high-contrast visible-wavelength imaging and spectrophotometry. Its design incorporates a telescope with an unobscured aperture of 1.8 meters, a coronographic camera for suppression of diffracted light, and precise active wavefront correction for the suppression of scattered background light. For reference, Eclipse is designed to reduce the diffracted and scattered starlight between 0.33 and 1.5 arcseconds from the star by three orders of magnitude compared to any HST instrument. The Eclipse mission provides precursor science exploration and technology experience in support of NASA's Terrestrial Planet Finder (TPF) program.

AFC-Enabled Simplified High-Lift System Integration Study

NASA Technical Reports Server (NTRS)

Hartwich, Peter M.; Dickey, Eric D.; Sclafani, Anthony J.; Camacho, Peter; Gonzales, Antonio B.; Lawson, Edward L.; Mairs, Ron Y.; Shmilovich, Arvin

2014-01-01

The primary objective of this trade study report is to explore the potential of using Active Flow Control (AFC) for achieving lighter and mechanically simpler high-lift systems for transonic commercial transport aircraft. This assessment was conducted in four steps. First, based on the Common Research Model (CRM) outer mold line (OML) definition, two high-lift concepts were developed. One concept, representative of current production-type commercial transonic transports, features leading edge slats and slotted trailing edge flaps with Fowler motion. The other CRM-based design relies on drooped leading edges and simply hinged trailing edge flaps for high-lift generation. The relative high-lift performance of these two high-lift CRM variants is established using Computational Fluid Dynamics (CFD) solutions to the Reynolds-Averaged Navier-Stokes (RANS) equations for steady flow. These CFD assessments identify the high-lift performance that needs to be recovered through AFC to have the CRM variant with the lighter and mechanically simpler high-lift system match the performance of the conventional high-lift system. Conceptual design integration studies for the AFC-enhanced high-lift systems were conducted with a NASA Environmentally Responsible Aircraft (ERA) reference configuration, the so-called ERA-0003 concept. These design trades identify AFC performance targets that need to be met to produce economically feasible ERA-0003-like concepts with lighter and mechanically simpler high-lift designs that match the performance of conventional high-lift systems. Finally, technical challenges are identified associated with the application of AFC-enabled highlift systems to modern transonic commercial transports for future technology maturation efforts.

Deep Space Habitat Concept of Operations for Extended Duration Transit Missions

NASA Technical Reports Server (NTRS)

Hoffman, Stephen J.; Toups, Larry

2012-01-01

NASA's Capability-Driven Framework (CDF) describes an approach for progressively extending human exploration missions farther into the Solar System for longer periods of time as allowed by developments in technology and spacecraft systems. Within this framework design reference missions (DRMs) targeted for several specific destinations are being used to assess different combinations of vehicles, operations, and advanced technologies to help understand which combination will best support expanded human exploration both efficiently and sustainably. Several of the identified destinations have been found to require missions with a round trip duration exceeding one year. These mission durations exceed the capabilities of current human-rated spacecraft if resupply from Earth is not possible. This makes the design of an efficient and reliable Deep Space Habitat (DSH) critical for reaching these destinations. The paper will describe the current understanding of DSH capabilities and functions that must be exhibited by any future habitat design for these missions. This description of the DSH is presented in the form of a concept of operation, which focuses on the functions that any DSH must provide, as opposed to a specific DSH design concept. Development of a concept of operations, based on DRM features, provides a common basis for assessing the viability of design concepts incorporating differing configurations and technologies. A study team with representation from several NASA Centers and relevant engineering and scientific disciplines collaborated to develop this DSH concept of operations for the transit phases of these missions. The transit phase of a mission is defined as the time after leaving Earth but before arrival at the destination and the time after leaving the destination but before arriving back at Earth. These transit phases were found to have many common features across all of the destinations being assessed for the CDF and thus arguing for a common concept of operations for all of the associated DRMs. The paper first describes the CDF and potential destinations being considered within this framework. DRMs representative of those currently being assessed will then be discussed to illustrate the range of capabilities that the DSH must support. The 18 functions identified by the multi-discipline analysis team are then described at a summary level. Several specific examples of the potential use for this concept of operations are described.

Editors' Introduction: Abstract Concepts: Structure, Processing, and Modeling.

PubMed

Bolognesi, Marianna; Steen, Gerard

2018-06-22

Our ability to deal with abstract concepts is one of the most intriguing faculties of human cognition. Still, we know little about how such concepts are formed, processed, and represented in mind. For example, because abstract concepts do not designate referents that can be experienced through our body, the role of perceptual experiences in shaping their content remains controversial. Current theories suggest a variety of alternative explanations to the question of "how abstract concepts are represented in the human mind." These views pinpoint specific streams of semantic information that would play a prominent role in shaping the content of abstract concepts, such as situation-based information (e.g., Barsalou & Wiemer-Hastings, ), affective information (Kousta, Vigliocco, Vinson, Andrews, & Del Campo, ), and linguistic information (Louwerse, ). Rarely, these theoretical views are directly compared. In this special issue, current views are presented in their most recent and advanced form, and directly compared and discussed in a debate, which is reported at the end of each article. As a result, new exciting questions and challenges arise. These questions and challenges, reported in this introductory article, can arguably pave the way to new empirical studies and theoretical developments on the nature of abstract concepts. © 2018 Cognitive Science Society, Inc.

Threshold concepts in finance: student perspectives

NASA Astrophysics Data System (ADS)

Hoadley, Susan; Kyng, Tim; Tickle, Leonie; Wood, Leigh N.

2015-10-01

Finance threshold concepts are the essential conceptual knowledge that underpin well-developed financial capabilities and are central to the mastery of finance. In this paper we investigate threshold concepts in finance from the point of view of students, by establishing the extent to which students are aware of threshold concepts identified by finance academics. In addition, we investigate the potential of a framework of different types of knowledge to differentiate the delivery of the finance curriculum and the role of modelling in finance. Our purpose is to identify ways to improve curriculum design and delivery, leading to better student outcomes. Whilst we find that there is significant overlap between what students identify as important in finance and the threshold concepts identified by academics, much of this overlap is expressed by indirect reference to the concepts. Further, whilst different types of knowledge are apparent in the student data, there is evidence that students do not necessarily distinguish conceptual from other types of knowledge. As well as investigating the finance curriculum, the research demonstrates the use of threshold concepts to compare and contrast student and academic perceptions of a discipline and, as such, is of interest to researchers in education and other disciplines.

Sail GTS ground system analysis: Avionics system engineering

NASA Technical Reports Server (NTRS)

Lawton, R. M.

1977-01-01

A comparison of two different concepts for the guidance, navigation and control test set signal ground system is presented. The first is a concept utilizing a ground plate to which crew station, avionics racks, electrical power distribution system, master electrical common connection assembly and marshall mated elements system grounds are connected by 4/0 welding cable. An alternate approach has an aluminum sheet interconnecting the signal ground reference points between the crew station and avionics racks. The comparison analysis quantifies the differences between the two concepts in terms of dc resistance, ac resistance and inductive reactance. These parameters are figures of merit for ground system conductors in that the system with the lowest impedance is the most effective in minimizing noise voltage. Although the welding cable system is probably adequate, the aluminum sheet system provides a higher probability of a successful system design.

Design concept of K-DEMO for near-term implementation

NASA Astrophysics Data System (ADS)

Kim, K.; Im, K.; Kim, H. C.; Oh, S.; Park, J. S.; Kwon, S.; Lee, Y. S.; Yeom, J. H.; Lee, C.; Lee, G.-S.; Neilson, G.; Kessel, C.; Brown, T.; Titus, P.; Mikkelsen, D.; Zhai, Y.

2015-05-01

A Korean fusion energy development promotion law (FEDPL) was enacted in 2007. As a following step, a conceptual design study for a steady-state Korean fusion demonstration reactor (K-DEMO) was initiated in 2012. After the thorough 0D system analysis, the parameters of the main machine characterized by the major and minor radii of 6.8 and 2.1 m, respectively, were chosen for further study. The analyses of heating and current drives were performed for the development of the plasma operation scenarios. Preliminary results on lower hybrid and neutral beam current drive are included herein. A high performance Nb3Sn-based superconducting conductor is adopted, providing a peak magnetic field approaching 16 T with the magnetic field at the plasma centre above 7 T. Pressurized water is the prominent choice for the main coolant of K-DEMO when the balance of plant development details is considered. The blanket system adopts a ceramic pebble type breeder. Considering plasma performance, a double-null divertor is the reference configuration choice of K-DEMO. For a high availability operation, K-DEMO incorporates a design with vertical maintenance. A design concept for K-DEMO is presented together with the preliminary design parameters.

The Big-Fish-Little-Pond Effect for Academic Self-Concept, Test Anxiety, and School Grades in Gifted Children.

PubMed

Zeidner; Schleyer

1999-10-01

This study reports data extending work by Marsh and colleagues on the "big-fish-little-pond effect" (BFLPE). The BFLPE hypothesizes that it is better for academic self-concept to be a big fish in a little pond (gifted student in regular reference group) than to be a small fish in a big pond (gifted student in gifted reference group). The BFLPE effect was examined with respect to academic self-concept, test anxiety, and school grades in a sample of 1020 gifted Israeli children participating in two different educational programs: (a) special homogeneous classes for the gifted and (b) regular mixed-ability classes. The central hypothesis, deduced from social comparison and reference group theory, was that academically talented students enrolled in special gifted classes will perceive their academic ability and chances for academic success less favorably compared to students in regular mixed-ability classes. These negative self-perceptions, in turn, will serve to deflate students' academic self-concept, elevate their levels of evaluative anxiety, and result in depressed school grades. A path-analytic model linking reference group, academic self-concept, evaluative anxiety, and school performance, was employed to test this conceptualization. Overall, the data lend additional support to reference group theory, with the big-fish-little-pond effect supported for all three variables tested. In addition, academic self-concept and test anxiety were observed to mediate the effects of reference group on school grades. Copyright 1999 Academic Press.

A system study of the solar power satellite concept

NASA Technical Reports Server (NTRS)

Piland, R. O.

1983-01-01

The paper summarizes a system study of the solar power satellite (SPS) concept which was conducted in the 1977-1980 time period. The system study was sponsored by the U.S. Department of Energy and the National Aeronautics and Space Administration as part of an SPS Concept Development and Evaluation Program. A reference system, developed during the study is described. The reference system was subsequently used as a basis for environmental, economic, and societal assessments. The reference system was recognized as probably not being an optimized approach. A number of alternate approaches which were studied in less depth are also described. The paper concludes with a number of observations regarding the SPS concept, and the pertinence of ongoing space technology, development, and flight programs to various aspects of the concept.

THE CONCEPT OF REFERENCE CONDITION, REVISITED ...

EPA Pesticide Factsheets

Ecological assessments of aquatic ecosystems depend on the ability to compare current conditions against some expectation of how they could be in the absence of significant human disturbance. The concept of a ‘‘reference condition’’ is often used to describe the standard or benchmark against which current condition is compared. If assessments are to be conducted consistently, then a common understanding of the definitions and complications of reference condition is necessary. A 2006 paper (Stoddard et al., 2006, Ecological Applications 16:1267-1276) made an early attempt at codifying the reference condition concept; in this presentation we will revisit the points raised in that paper (and others) and examine how our thinking has changed in a little over 10 years.Among the issues to be discussed: (1) the “moving target” created when reference site data are used to set thresholds in large scale assessments; (2) natural vs. human disturbance and their effects on reference site distributions; (3) circularity and the use of biological data to assist in reference site identification; (4) using site-scale (in-stream or in-lake) measurements vs. landscape-level human activity to identify reference conditions. Ecological assessments of aquatic ecosystems depend on the ability to compare current conditions against some expectation of how they could be in the absence of significant human disturbance. The concept of a ‘‘reference condition’’ is often use

Cognitive Ability, Academic Achievement and Academic Self-Concept: Extending the Internal/External Frame of Reference Model

ERIC Educational Resources Information Center

Chen, Ssu-Kuang; Hwang, Fang-Ming; Yeh, Yu-Chen; Lin, Sunny S. J.

2012-01-01

Background: Marsh's internal/external (I/E) frame of reference model depicts the relationship between achievement and self-concept in specific academic domains. Few efforts have been made to examine concurrent relationships among cognitive ability, achievement, and academic self-concept (ASC) within an I/E model framework. Aim: To simultaneously…

Conceptual design of a self-deployable, high performance parabolic concentrator for advanced solar-dynamic power systems

NASA Astrophysics Data System (ADS)

Dehne, Hans J.

1991-05-01

NASA has initiated technology development programs to develop advanced solar dynamic power systems and components for space applications beyond 2000. Conceptual design work that was performed is described. The main efforts were the: (1) conceptual design of self-deploying, high-performance parabolic concentrator; and (2) materials selection for a lightweight, shape-stable concentrator. The deployment concept utilizes rigid gore-shaped reflective panels. The assembled concentrator takes an annular shape with a void in the center. This deployable concentrator concept is applicable to a range of solar dynamic power systems of 25 kW sub e to in excess of 75 kW sub e. The concept allows for a family of power system sizes all using the same packaging and deployment technique. The primary structural material selected for the concentrator is a polyethyl ethylketone/carbon fiber composite also referred to as APC-2 or Vitrex. This composite has a nearly neutral coefficient of thermal expansion which leads to shape stable characteristics under thermal gradient conditions. Substantial efforts were undertaken to produce a highly specular surface on the composite. The overall coefficient of thermal expansion of the composite laminate is near zero, but thermally induced stresses due to micro-movement of the fibers and matrix in relation to each other cause the surface to become nonspecular.

Conceptual design of a self-deployable, high performance parabolic concentrator for advanced solar-dynamic power systems

NASA Technical Reports Server (NTRS)

Dehne, Hans J.

1991-01-01

NASA has initiated technology development programs to develop advanced solar dynamic power systems and components for space applications beyond 2000. Conceptual design work that was performed is described. The main efforts were the: (1) conceptual design of self-deploying, high-performance parabolic concentrator; and (2) materials selection for a lightweight, shape-stable concentrator. The deployment concept utilizes rigid gore-shaped reflective panels. The assembled concentrator takes an annular shape with a void in the center. This deployable concentrator concept is applicable to a range of solar dynamic power systems of 25 kW sub e to in excess of 75 kW sub e. The concept allows for a family of power system sizes all using the same packaging and deployment technique. The primary structural material selected for the concentrator is a polyethyl ethylketone/carbon fiber composite also referred to as APC-2 or Vitrex. This composite has a nearly neutral coefficient of thermal expansion which leads to shape stable characteristics under thermal gradient conditions. Substantial efforts were undertaken to produce a highly specular surface on the composite. The overall coefficient of thermal expansion of the composite laminate is near zero, but thermally induced stresses due to micro-movement of the fibers and matrix in relation to each other cause the surface to become nonspecular.

Turbomachinery design considerations for the nuclear HTGR-GT power plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonald, C.F.; Smith, M.J.

1979-11-01

For several years, design studies have been under way in the USA on a nuclear closed-cycle gas turbine plant (HTGR-GT). Design aspects of the helium turbomachine portion of these studies are presented. Gas dynamic and mechanical design considerations are presented for helium turbomachines in the 400-MW(e) (non-intercooled) and 600-MW(e) (intercooled) power range. Design of the turbomachine is a key element in the overall power plant program effort, which is currently directed toward the selection of a reference HTGR-GT commercial plant configuration for the US utility market. A conservative design approach has been emphasized to provide maximum safety and durability. Themore » studies presented for the integrated plant concept outline the necessary close working relationship between the reactor primary system and turbomachine designers.« less

Multidisciplinary conceptual design optimization of aircraft using a sound-matching-based objective function

NASA Astrophysics Data System (ADS)

Diez, Matteo; Iemma, Umberto

2012-05-01

The article presents a novel approach to include community noise considerations based on sound quality in the Multidisciplinary Conceptual Design Optimization (MCDO) of civil transportation aircraft. The novelty stems from the use of an unconventional objective function, defined as a measure of the difference between the noise emission of the aircraft under analysis and a reference 'weakly annoying' noise, the target sound. The minimization of such a merit factor yields an aircraft concept with a noise signature as close as possible to the given target. The reference sound is one of the outcomes of the European Research Project SEFA (Sound Engineering For Aircraft, VI Framework Programme, 2004-2007), and used here as an external input. The aim of the present work is to address the definition and the inclusion of the sound-matching-based objective function in the MCDO of aircraft.

Mars Surface Habitability Options

NASA Technical Reports Server (NTRS)

Howe, A. Scott; Simon, Matthew; Smitherman, David; Howard, Robert; Toups, Larry; Hoffman, Stephen J.

2015-01-01

This paper reports on current habitability concepts for an Evolvable Mars Campaign (EMC) prepared by the NASA Human Spaceflight Architecture Team (HAT). For many years NASA has investigated alternative human Mars missions, examining different mission objectives, trajectories, vehicles, and technologies; the combinations of which have been referred to as reference missions or architectures. At the highest levels, decisions regarding the timing and objectives for a human mission to Mars continue to evolve while at the lowest levels, applicable technologies continue to advance. This results in an on-going need for assessments of alternative system designs such as the habitat, a significant element in any human Mars mission scenario, to provide meaningful design sensitivity characterizations to assist decision-makers regarding timing, objectives, and technologies. As a subset of the Evolvable Mars Campaign activities, the habitability team builds upon results from past studies and recommends options for Mars surface habitability compatible with updated technologies.

Mars Design Reference Architecture 5.0 Study: Executive Summary

NASA Technical Reports Server (NTRS)

Drake, Bret G.

2008-01-01

The NASA Mars Design Reference Architecture 5.0 Study seeks to update its long term goals and objective for human exploration missions; flight and surface systems for human missions and supporting infrastructure; operational concept for human and robotic exploration of Mars; key challenges including risk and cost drivers; and, its development schedule options. It additionally seeks to assess strategic linkages between lunar and Mars strategies and develop and understanding of methods for reducing the cost/risk of human Mars missions through investment in research, technology development, and synergy with other exploration plans. Recommendations are made regarding conjunction class (long-stay) missions which are seen as providing the best balance of cost, risk, and performance. Additionally, this study reviews entry, descent, and landing challenges; in-space transportation systems; launch vehicle and Orion assessments; risk and risk mitigation; key driving requirements and challenges; and, lunar linkages.

Dynamic Compression of the Signal in a Charge Sensitive Amplifier: From Concept to Design

NASA Astrophysics Data System (ADS)

Manghisoni, Massimo; Comotti, Daniele; Gaioni, Luigi; Ratti, Lodovico; Re, Valerio

2015-10-01

This work is concerned with the design of a low-noise Charge Sensitive Amplifier featuring a dynamic signal compression based on the non-linear features of an inversion-mode MOS capacitor. These features make the device suitable for applications where a non-linear characteristic of the front-end is required, such as in imaging instrumentation for free electron laser experiments. The aim of the paper is to discuss a methodology for the proper design of the feedback network enabling the dynamic signal compression. Starting from this compression solution, the design of a low-noise Charge Sensitive Amplifier is also discussed. The study has been carried out by referring to a 65 nm CMOS technology.

TMN: Introduction and interpretation

NASA Astrophysics Data System (ADS)

Pras, Aiko

An overview of Telecommunications Management Network (TMN) status is presented. Its relation with Open System Interconnection (OSI) systems management is given and the commonalities and distinctions are identified. Those aspects that distinguish TMN from OSI management are introduced; TMN's functional and physical architectures and TMN's logical layered architecture are discussed. An analysis of the concepts used by these architectures (reference point, interface, function block, and building block) is given. The use of these concepts to express geographical distribution and functional layering is investigated. This aspect is interesting to understand how OSI management protocols can be used in a TMN environment. A statement regarding applicability of TMN as a model that helps the designers of (management) networks is given.

Methodology for conceptual remote sensing spacecraft technology: insertion analysis balancing performance, cost, and risk

NASA Astrophysics Data System (ADS)

Bearden, David A.; Duclos, Donald P.; Barrera, Mark J.; Mosher, Todd J.; Lao, Norman Y.

1997-12-01

Emerging technologies and micro-instrumentation are changing the way remote sensing spacecraft missions are developed and implemented. Government agencies responsible for procuring space systems are increasingly requesting analyses to estimate cost, performance and design impacts of advanced technology insertion for both state-of-the-art systems as well as systems to be built 5 to 10 years in the future. Numerous spacecraft technology development programs are being sponsored by Department of Defense (DoD) and National Aeronautics and Space Administration (NASA) agencies with the goal of enhancing spacecraft performance, reducing mass, and reducing cost. However, it is often the case that technology studies, in the interest of maximizing subsystem-level performance and/or mass reduction, do not anticipate synergistic system-level effects. Furthermore, even though technical risks are often identified as one of the largest cost drivers for space systems, many cost/design processes and models ignore effects of cost risk in the interest of quick estimates. To address these issues, the Aerospace Corporation developed a concept analysis methodology and associated software tools. These tools, collectively referred to as the concept analysis and design evaluation toolkit (CADET), facilitate system architecture studies and space system conceptual designs focusing on design heritage, technology selection, and associated effects on cost, risk and performance at the system and subsystem level. CADET allows: (1) quick response to technical design and cost questions; (2) assessment of the cost and performance impacts of existing and new designs/technologies; and (3) estimation of cost uncertainties and risks. These capabilities aid mission designers in determining the configuration of remote sensing missions that meet essential requirements in a cost- effective manner. This paper discuses the development of CADET modules and their application to several remote sensing satellite mission concepts.

RS-34 Phoenix In-Space Propulsion System Applied to Active Debris Removal Mission

NASA Technical Reports Server (NTRS)

Esther, Elizabeth A.; Burnside, Christopher G.

2014-01-01

In-space propulsion is a high percentage of the cost when considering Active Debris Removal mission. For this reason it is desired to research if existing designs with slight modification would meet mission requirements to aid in reducing cost of the overall mission. Such a system capable of rendezvous, close proximity operations, and de-orbit of Envisat class resident space objects has been identified in the existing RS-34 Phoenix. RS-34 propulsion system is a remaining asset from the de-commissioned United States Air Force Peacekeeper program; specifically the pressure-fed storable bi-propellant Stage IV Post Boost Propulsion System. The National Aeronautics and Space Administration (NASA) Marshall Space Flight Center (MSFC) gained experience with the RS-34 propulsion system on the successful Ares I-X flight test program flown in the Ares I-X Roll control system (RoCS). The heritage hardware proved extremely robust and reliable and sparked interest for further utilization on other potential in-space applications. Subsequently, MSFC has obtained permission from the USAF to obtain all the remaining RS-34 stages for re-use opportunities. The MSFC Advanced Concepts Office (ACO) was commissioned to lead a study for evaluation of the Rocketdyne produced RS-34 propulsion system as it applies to an active debris removal design reference mission for resident space object targets including Envisat. Originally designed, the RS-34 Phoenix provided in-space six-degrees-of freedom operational maneuvering to deploy payloads at multiple orbital locations. The RS-34 Concept Study lead by sought to further understand application for a similar orbital debris design reference mission to provide propulsive capability for rendezvous, close proximity operations to support the capture phase of the mission, and deorbit of single or multiple large class resident space objects. Multiple configurations varying the degree of modification were identified to trade for dry mass optimization and propellant load. The results of the RS-34 Phoenix Concept Study show that the system is technically sufficient to successfully support all of the missions to rendezvous, capture, and de-orbit targets including Envisat and Hubble Space Telescope. The results and benefits of the RS-34 Orbital Debris Application Concept Study are presented in this paper.

Handling and Emplacement Options for Deep Borehole Disposal Conceptual Design.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cochran, John R.; Hardin, Ernest

2015-07-01

This report presents conceptual design information for a system to handle and emplace packages containing radioactive waste, in boreholes 16,400 ft deep or possibly deeper. Its intended use is for a design selection study that compares the costs and risks associated with two emplacement methods: drill-string and wireline emplacement. The deep borehole disposal (DBD) concept calls for siting a borehole (or array of boreholes) that penetrate crystalline basement rock to a depth below surface of about 16,400 ft (5 km). Waste packages would be emplaced in the lower 6,560 ft (2 km) of the borehole, with sealing of appropriate portionsmore » of the upper 9,840 ft (3 km). A deep borehole field test (DBFT) is planned to test and refine the DBD concept. The DBFT is a scientific and engineering experiment, conducted at full-scale, in-situ, without radioactive waste. Waste handling operations are conceptualized to begin with the onsite receipt of a purpose-built Type B shipping cask, that contains a waste package. Emplacement operations begin when the cask is upended over the borehole, locked to a receiving flange or collar. The scope of emplacement includes activities to lower waste packages to total depth, and to retrieve them back to the surface when necessary for any reason. This report describes three concepts for the handling and emplacement of the waste packages: 1) a concept proposed by Woodward-Clyde Consultants in 1983; 2) an updated version of the 1983 concept developed for the DBFT; and 3) a new concept in which individual waste packages would be lowered to depth using a wireline. The systems described here could be adapted to different waste forms, but for design of waste packaging, handling, and emplacement systems the reference waste forms are DOE-owned high- level waste including Cs/Sr capsules and bulk granular HLW from fuel processing. Handling and Emplacement Options for Deep Borehole Disposal Conceptual Design July 23, 2015 iv ACKNOWLEDGEMENTS This report has benefited greatly from review principally by Steve Pye, and also by Paul Eslinger, Dave Sevougian and Jiann Su.« less

A Systematic Review and Taxonomy of Published Quality Criteria Related to the Evaluation of User-Facing eHealth Programs.

PubMed

Baumel, Amit; Birnbaum, Michael L; Sucala, Madalina

2017-08-01

The purpose of this review was to identify and classify key criteria concepts related to the evaluation of user-facing eHealth programs. In line with the PRISMA statement methodology, computer searches of relevant databases were conducted for studies published between January 1, 2000 and March 1, 2016 that contained explicit quality criteria related to mHealth and eHealth products. Reference lists of included articles, review articles, and grey literature (e.g., books, websites) were searched for additional sources. A team of nine experts led by the first author was gathered to support the classification of these criteria. Identified criteria were extracted, grouped and organized using an inductive thematic analysis. Eighty-four sources - emanating from 26 different courtiers - were included in this review. The team extracted 454 criteria that were grouped into 11 quality domains, 58 criteria concepts and 134 concepts' sub-groups. Quality domains were: Usability, Visual Design, User Engagement, Content, Behavior Change/Persuasive Design, Influence of Social Presence, Therapeutic Alliance, Classification, Credibility/Accountability, and Privacy/Security. Findings suggest that authors around the globe agree on key criteria concepts when evaluating user-facing eHealth products. The high proportion of new published criteria in the second half of this review time-frame (2008-2016), and more specifically, the high proportion of criteria relating to persuasive design, therapeutic alliance and privacy/security within this time-frame, points to the advancements made in recent years within this field.

Self-perception in a clinical sample of gender variant children.

PubMed

Rijn, Anouk Balleur-van; Steensma, Thomas D; Kreukels, Baudewijntje P C; Cohen-Kettenis, Peggy T

2013-07-01

Gender variance (GV) in childhood has a negative impact on the self-concept of children in the general population and can lead to mental health problems and even suicidal ideation in adulthood. This study explored the self-concept of clinically referred gender variant children and examined potential risk factors. The Self-Perception Profile for Children was administered to 147 children, who were referred to a gender identity clinic. Their parents completed the Child Behaviour Checklist and the Gender Identity Questionnaire to assess the degree of GV. The referred children were at risk of developing a negative self-concept; more specifically gender variant girls had low scores on 'global self-worth', 'physical appearance' and 'behavioural conduct' compared to Dutch norms for girls. Gender variant boys had low scores on 'global self-worth', 'scholastic competence', 'athletic competence' and 'physical appearance' compared to Dutch norms for boys. Within the group of referred children, sex differences, but no age effects, were found. The referred girls felt more competent than the referred boys on 'athletic competence' and 'scholastic functioning'. For both boys and girls poor peer relations had a significant negative relationship with self-concept and more GV was related to a lower global self-worth. Clinically referred gender variant children seemed vulnerable to developing a negative self-concept. Poor peer relations and extreme GV might be mediating variables. Interventions might focus on enhancing acceptance of the environment and improving social skills of gender variant children.

Athena Mission Status

NASA Astrophysics Data System (ADS)

Lumb, D.

2016-07-01

Athena has been selected by ESA for its second large mission opportunity of the Cosmic Visions programme, to address the theme of the Hot and Energetic Universe. Following the submission of a proposal from the community, the technical and programmatic aspects of the mission design were reviewed in ESA's Concurrent Design Facility. The proposed concept was deemed to betechnically feasible, but with potential constraints from cost and schedule. Two parallel industry study contracts have been conducted to explore these conclusions more thoroughly, with the key aim of providing consolidated inputs to a Mission Consolidation Review that was conducted in April-May 2016. This MCR has recommended a baseline design, which allows the agency to solicit proposals for a community provided payload. Key design aspects arising from the studies are described, and the new reference design is summarised.

Development of a Universal Waste Management System

NASA Technical Reports Server (NTRS)

Baccus, Shelley; Broyan, James L., Jr.

2013-01-01

A concept for a Universal Waste Management System (UWMS) has been developed based on the knowledge gained from over 50 years of space travel. It is being designed for Commercial Orbital Transportation Services (COTS) and Multi ]Purpose Crew Vehicle (MPCV) and is based upon the Extended Duration Orbiter (EDO) commode. The UMWS was modified to enhance crew interface and reduce volume and cost. The UWMS will stow waste in fecal canisters, similar to the EDO, and urine will be stowed in bags for in orbit change out. This allows the pretreated urine to be subsequently processed and recovered as drinking water. The new design combines two fans and a rotary phase separator on a common shaft to allow operation by a single motor. This change enhances packaging by reducing the volume associated with an extra motor, associated controller, harness, and supporting structure. The separator pumps urine to either a dual bag design for COTS vehicles or directly into a water reclamation system. The commode is supported by a concentric frame, enhancing its structural integrity while further reducing the volume from the previous design. The UWMS flight concept development effort is underway and an early output of the development will be a ground based UMWS prototype for manned testing. Referred to as the Gen 3 unit, this prototype will emulate the crew interface included in the UWMS and will offer a great deal of knowledge regarding the usability of the new design, allowing the design team the opportunity to modify the UWMS flight concept based on the manned testing.

Concept of combinatorial de novo design of drug-like molecules by particle swarm optimization.

PubMed

Hartenfeller, Markus; Proschak, Ewgenij; Schüller, Andreas; Schneider, Gisbert

2008-07-01

We present a fast stochastic optimization algorithm for fragment-based molecular de novo design (COLIBREE, Combinatorial Library Breeding). The search strategy is based on a discrete version of particle swarm optimization. Molecules are represented by a scaffold, which remains constant during optimization, and variable linkers and side chains. Different linkers represent virtual chemical reactions. Side-chain building blocks were obtained from pseudo-retrosynthetic dissection of large compound databases. Here, ligand-based design was performed using chemically advanced template search (CATS) topological pharmacophore similarity to reference ligands as fitness function. A weighting scheme was included for particle swarm optimization-based molecular design, which permits the use of many reference ligands and allows for positive and negative design to be performed simultaneously. In a case study, the approach was applied to the de novo design of potential peroxisome proliferator-activated receptor subtype-selective agonists. The results demonstrate the ability of the technique to cope with large combinatorial chemistry spaces and its applicability to focused library design. The technique was able to perform exploitation of a known scheme and at the same time explorative search for novel ligands within the framework of a given molecular core structure. It thereby represents a practical solution for compound screening in the early hit and lead finding phase of a drug discovery project.

Unified implementation of the reference architecture : concept of operations.

DOT National Transportation Integrated Search

2015-10-19

This document describes the Concept of Operations (ConOps) for the Unified Implementation of the Reference Architecture, located in Southeast Michigan, which supports connected vehicle research and development. This ConOps describes the current state...

Concept Mapping Assessment of Media Assisted Learning in Interdisciplinary Science Education

NASA Astrophysics Data System (ADS)

Schaal, Steffen; Bogner, Franz X.; Girwidz, Raimund

2010-05-01

Acquisition of conceptual knowledge is a central aim in science education. In this study we monitored an interdisciplinary hypermedia assisted learning unit on hibernation and thermodynamics based on cooperative learning. We used concept mapping for the assessment, applying a pre-test/post-test design. In our study, 106 9th graders cooperated by working in pairs ( n = 53) for six lessons. As an interdisciplinary learning activity in such complex knowledge domains has to combine many different aspects, we focused on long-term knowledge. Learners working cooperatively in dyads constructed computer-supported concept maps which were analysed by specific software. The data analysis encompassed structural aspects of the knowledge corresponding to a target reference map. After the learning unit, the results showed the acquisition of higher-order domain-specific knowledge structures which indicates successful interdisciplinary learning through the hypermedia learning environment. The benefit of using a computer-assisted concept mapping assessment for research in science education, and in science classrooms is considered.

Invited article: advanced drag-free concepts for future space-based interferometers: acceleration noise performance.

PubMed

Gerardi, D; Allen, G; Conklin, J W; Sun, K-X; DeBra, D; Buchman, S; Gath, P; Fichter, W; Byer, R L; Johann, U

2014-01-01

Future drag-free missions for space-based experiments in gravitational physics require a Gravitational Reference Sensor with extremely demanding sensing and disturbance reduction requirements. A configuration with two cubical sensors is the current baseline for the Laser Interferometer Space Antenna (LISA) and has reached a high level of maturity. Nevertheless, several promising concepts have been proposed with potential applications beyond LISA and are currently investigated at HEPL, Stanford, and EADS Astrium, Germany. The general motivation is to exploit the possibility of achieving improved disturbance reduction, and ultimately understand how low acceleration noise can be pushed with a realistic design for future mission. In this paper, we discuss disturbance reduction requirements for LISA and beyond, describe four different payload concepts, compare expected strain sensitivities in the "low-frequency" region of the frequency spectrum, dominated by acceleration noise, and ultimately discuss advantages and disadvantages of each of those concepts in achieving disturbance reduction for space-based detectors beyond LISA.

Designing with figer-reinforced plastics (planar random composites)

NASA Technical Reports Server (NTRS)

Chamis, C. C.

1982-01-01

The use of composite mechanics to predict the hygrothermomechanical behavior of planar random composites (PRC) is reviewed and described. These composites are usually made from chopped fiber reinforced resins (thermoplastics or thermosets). The hygrothermomechanical behavior includes mechanical properties, physical properties, thermal properties, fracture toughness, creep and creep rupture. Properties are presented in graphical form with sample calculations to illustrate their use. Concepts such as directional reinforcement and strip hybrids are described. Typical data that can be used for preliminary design for various PRCs are included. Several resins and molding compounds used to make PRCs are described briefly. Pertinent references are cited that cover analysis and design methods, materials, data, fabrication procedures and applications.

Common computational properties found in natural sensory systems

NASA Astrophysics Data System (ADS)

Brooks, Geoffrey

2009-05-01

Throughout the animal kingdom there are many existing sensory systems with capabilities desired by the human designers of new sensory and computational systems. There are a few basic design principles constantly observed among these natural mechano-, chemo-, and photo-sensory systems, principles that have been proven by the test of time. Such principles include non-uniform sampling and processing, topological computing, contrast enhancement by localized signal inhibition, graded localized signal processing, spiked signal transmission, and coarse coding, which is the computational transformation of raw data using broadly overlapping filters. These principles are outlined here with references to natural biological sensory systems as well as successful biomimetic sensory systems exploiting these natural design concepts.

Automated extraction of knowledge for model-based diagnostics

NASA Technical Reports Server (NTRS)

Gonzalez, Avelino J.; Myler, Harley R.; Towhidnejad, Massood; Mckenzie, Frederic D.; Kladke, Robin R.

1990-01-01

The concept of accessing computer aided design (CAD) design databases and extracting a process model automatically is investigated as a possible source for the generation of knowledge bases for model-based reasoning systems. The resulting system, referred to as automated knowledge generation (AKG), uses an object-oriented programming structure and constraint techniques as well as internal database of component descriptions to generate a frame-based structure that describes the model. The procedure has been designed to be general enough to be easily coupled to CAD systems that feature a database capable of providing label and connectivity data from the drawn system. The AKG system is capable of defining knowledge bases in formats required by various model-based reasoning tools.

Aircraft Crash Survival Design Guide. Volume 4. Aircraft Seats, Restraints. Litters, and Padding

DTIC Science & Technology

1980-06-01

11i 34 Tubular strut wire - bending energy absorber with force-deflection curves ..... . . . . . . . . . . 113 35 Inversion tube concept with...decelera- tor and a wire - bending seat load limiter (References 31 and 32). Therefore, correcting the calculated distance yields 16.25/0.8 - 20.31 in. It...Naval Air Development Center, Warminster, Pennsylvania, October 1969. )- 109 I-. - - ’. Two variations of the wire - bending device have been developed and

Spatial Reference in Rongga (ISO 639-3: ROR), Balinese (ISO 639-3: BAN), and Indonesia (ISO 639-3: IND)

ERIC Educational Resources Information Center

Aryawibawa, I Nyoman

2010-01-01

Many scholars have proposed concepts relevant to spatial reference. Herskovits (1982) proposed that the topological concepts support, contiguity and containment are basic in English, while Levinson et al.'s (2003) examination of nine unrelated languages revealed that the concept attachment is primary. Neither of these proposals is confirmed in…

Holistic Nursing Simulation: A Concept Analysis.

PubMed

Cohen, Bonni S; Boni, Rebecca

2018-03-01

Simulation as a technology and holistic nursing care as a philosophy are two components within nursing programs that have merged during the process of knowledge and skill acquisition in the care of the patients as whole beings. Simulation provides opportunities to apply knowledge and skill through the use of simulators, standardized patients, and virtual settings. Concerns with simulation have been raised regarding the integration of the nursing process and recognizing the totality of the human being. Though simulation is useful as a technology, the nursing profession places importance on patient care, drawing on knowledge, theories, and expertise to administer patient care. There is a need to promptly and comprehensively define the concept of holistic nursing simulation to provide consistency and a basis for quality application within nursing curricula. This concept analysis uses Walker and Avant's approach to define holistic nursing simulation by defining antecedents, consequences, and empirical referents. The concept of holism and the practice of holistic nursing incorporated into simulation require an analysis of the concept of holistic nursing simulation by developing a language and model to provide direction for educators in design and development of holistic nursing simulation.

Positioning navigation and timing service applications in cyber physical systems

NASA Astrophysics Data System (ADS)

Qu, Yi; Wu, Xiaojing; Zeng, Lingchuan

2017-10-01

The positioning navigation and timing (PNT) architecture was discussed in detail, whose history, evolvement, current status and future plan were presented, main technologies were listed, advantages and limitations of most technologies were compared, novel approaches were introduced, and future capacities were sketched. The concept of cyber-physical system (CPS) was described and their primary features were interpreted. Then the three-layer architecture of CPS was illustrated. Next CPS requirements on PNT services were analyzed, including requirements on position reference and time reference, requirements on temporal-spatial error monitor, requirements on dynamic services, real-time services, autonomous services, security services and standard services. Finally challenges faced by PNT applications in CPS were concluded. The conclusion was expected to facilitate PNT applications in CPS, and furthermore to provide references to the design and implementation of both architectures.

Preliminary Assessment of Variable Speed Power Turbine Technology on Civil Tiltrotor Size and Performance

NASA Technical Reports Server (NTRS)

Snyder, Christopher A.; Acree, Cecil W., Jr.

2012-01-01

A Large Civil Tiltrotor (LCTR) conceptual design was developed as part of the NASA Heavy Lift Rotorcraft Systems Investigation in order to establish a consistent basis for evaluating the benefits of advanced technology for large tiltrotors. The concept has since evolved into the second-generation LCTR2, designed to carry 90 passengers for 1,000 nm at 300 knots, with vertical takeoff and landing capability. This paper performs a preliminary assessment of variable-speed power turbine technology on LCTR2 sizing, while maintaining the same, advanced technology engine core. Six concepts were studied; an advanced, single-speed engine with a conventional power turbine layout (Advanced Conventional Engine, or ACE) using a multi-speed (shifting) gearbox. There were five variable-speed power turbine (VSPT) engine concepts, comprising a matrix of either three or four turbine stages, and fixed or variable guide vanes; plus a minimum weight, twostage, fixed-geometry VSPT. The ACE is the lightest engine, but requires a multi-speed (shifting) gearbox to maximize its fuel efficiency, whereas the VSPT concepts use a lighter, fixed-ratio gearbox. The NASA Design and Analysis of Rotorcraft (NDARC) design code was used to study the trades between rotor and engine efficiency and weight. Rotor performance was determined by Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics (CAMRAD II), and engine performance was estimated with the Numerical Propulsion System Simulation (NPSS). Design trades for the ACE vs. VSPT are presented in terms of vehicle gross and empty weight, propulsion system weight and mission fuel burn for the civil mission. Because of its strong effect on gearbox weight and on both rotor and engine efficiency, rotor speed was chosen as the reference design variable for comparing design trades. Major study assumptions are presented and discussed. Impressive engine power-to-weight and fuel efficiency reduced vehicle sensitivity to propulsion system choice. The 10% weight penalty for multi-speed gearbox was more significant than most engine technology weight penalties to the vehicle design because drive system weight is more than two times engine weight. Based on study assumptions, fixed-geometry VSPT concept options performed better than their variable-geometry counterparts. Optimum design gross weights varied 1% or less and empty weights less than 2% among the concepts studied, while optimum fuel burns varied up to 5%. The outcome for some optimum configurations was so unexpected as to recommend a deeper look at the underlying technology assumptions.

A comprehensive approach to environmental and human factors into product/service design and development. A review from an ergoecological perspective.

PubMed

Saravia-Pinilla, Martha H; Daza-Beltrán, Carolina; García-Acosta, Gabriel

2016-11-01

This article presents the results of a documentary-exploratory review of design methods and concepts associated with human and environmental factors, based on a qualitative-quantitative analysis of coincidences with the fundamentals of ergoecology and in line with sustainable dynamics, with a view to putting the principles of ergoecology into practice in product/service design and development. 61.6% of 696 documents found represent work on conceptual developments, while the remaining 38.4% refer to design methods. Searches were refined using Nvivo-10 software, and 101 documents were obtained about theoretical aspects while 17 focused on the application of methods, and these formed the analysis universe. The results show how little concern there is for working comprehensively on human and environmental aspects, and a trend toward segmentation of human and environmental aspects in the field of product/service design and development can be seen, at both concept and application/methodology levels. It was concluded from the above that comprehensive, simultaneous work is needed on human and environmental aspects, clarity and conceptual unity, in order to achieve sustainability in practical matters and ensure that ergoecology-compatible design methods are applied. Copyright © 2015 Elsevier Ltd. All rights reserved.

Anatomic Customization of Root-Analog Dental Implants With Cone-Beam CT and CAD/CAM Fabrication: A Cadaver-Based Pilot Evaluation.

PubMed

Evans, Zachary P; Renne, Walter G; Bacro, Thierry R; Mennito, Anthony S; Ludlow, Mark E; Lecholop, Michael K

2018-02-01

Existing root-analog dental implant systems have no standardized protocols regarding retentive design, surface manipulation, or prosthetic attachment design relative to the site's unique anatomy. Historically, existing systems made those design choices arbitrarily. For this report, strategies were developed that deliberately reference the adjacent anatomy, implant and restorable path of draw, and bone density for implant and retentive design. For proof of concept, dentate arches from human cadavers were scanned using cone-beam computed tomography and then digitally modeled. Teeth of interest were virtually extracted and manipulated via computer-aided design to generate root-analog implants from zirconium. We created a stepwise protocol for analyzing and developing the implant sites, implant design and retention, and prosthetic emergence and connection all from the pre-op cone-beam data. Root-analog implants were placed at the time of extraction and examined radiographically and mechanically concerning ideal fit and stability. This study provides proof of concept that retentive root-analog implants can be produced from cone-beam data while improving fit, retention, safety, esthetics, and restorability when compared to the existing protocols. These advancements may provide the critical steps necessary for clinical relevance and success of immediately placed root-analog implants. Additional studies are necessary to validate the model prior to clinical trial.

Development of an Assessment Model for Sustainable Supply Chain Management in Batik Industry

NASA Astrophysics Data System (ADS)

Mubiena, G. F.; Ma’ruf, A.

2018-03-01

This research proposes a dynamic assessment model for sustainable supply chain management in batik industry. The proposed model identifies the dynamic relationship between economic aspect, environment aspect and social aspect. The economic aspect refers to the supply chain operation reference model. The environment aspect uses carbon emissions and liquid waste as the attribute assessment, while the social aspect focus on employee’s welfare. Lean manufacturing concept was implemented as an alternative approach to sustainability. The simulation result shows that the average of sustainability score for 5 years increased from 65,3% to 70%. Future experiments will be conducted on design improvements to reach the company target on sustainability score.

The Reciprocal Internal/External Frame of Reference Model: An Integration of Models of Relations between Academic Achievement and Self-Concept

ERIC Educational Resources Information Center

Moller, Jens; Retelsdorf, Jan; Koller, Olaf; Marsh, Herb W.

2011-01-01

The reciprocal internal/external frame of reference model (RI/EM) combines the internal/external frame of reference model and the reciprocal effects model. The RI/EM predicts positive effects of mathematics and verbal achievement and academic self-concepts (ASC) on subsequent mathematics and verbal achievements and ASCs within domains and negative…

PMG: Numerical model of a fault tolerant permanent magnet generator for high rpm applications

NASA Astrophysics Data System (ADS)

Bertrand, Alexandre

The aerospace industry is confronting an increasing number of challenges these days. One can think for instance of the environmental challenges as well as the economic and social ones to name a few. These challenges have forced the industry to turn their design philosophy toward new ways of doing things. It is in this context that was born the More Electrical Aircraft (MEA) concept. This concept aims at giving a more prominent part to electrical power in the overall installed power balance aboard aircrafts (in comparison to more traditional power sources such as mechanical and hydraulic). In order to be able to support this increasing demand in electrical power, the electric power generation aboard aircrafts needed reengineering. This is one of the main reasons the More Electrical Engine (MEE) concept was born: to serve the needs of the MEA philosophy. It is precisely under the MEE concept that this project takes place. This project, realized in collaboration with Pratt & Whitney Canada (PWC), is a first attempt at the electrical modelling of this new type of electrical generator designed for aircrafts. The main objectives of this project are to understand the principles of operation of the New Architecture Electromagnetic Machine (NAEM) and to build a simplified model for EMTP-RV for steady-state simulations. This document contains the results that were obtained during the electrical modelling project of the New Architecture Electromagnetic Machine (NAEM) by the author using data from PWC. The model built by PWC using MagNet, a finite element analysis software, was used as the reference during the project. It was possible to develop an electrical model of the generator that replicate with a good accuracy the behaviour of the model of reference under steady-state operation. Some technical avenues are explored in the discussion in order to list the key improvements that will need to be done to the electrical model in future work.

Thiokol/Wasatch installation evaluation of the redesigned field joint protection system (concepts 1 and 3)

NASA Technical Reports Server (NTRS)

Cook, M.

1989-01-01

The procedures, performance, and results obtained from the Thiokol Corporation/Wasatch Redesigned Field Joint Protection System (FJPS) Installation Evaluation are documented. The purpose of the evaluation was to demonstrate and develop the procedures required to install two different concepts (referred to as Concepts 1 and 3) of the redesigned FJPS. The processing capability of each configuration was then evaluated and compared. The FJPS is installed on redesigned solid rocket motors (RSRM) to protect the field joints from rain intrusion and to maintain the joint temperature sensor measurement between 85 and 122 F while the boosters are on the launch pad. The FJPS is being redesigned to reduce installation timelines at KSC and to simplify or eliminate installation processing problems related to the present design of an EPDM moisture seal/extruded cork combination. Several installation techniques were evaluated, and a preferred method of application was developed for each concept. The installations were performed with the test article in the vertical (flight) position. Comparative timelines between the two concepts were also developed. An additional evaluation of the Concept 3 configuration was performed with the test article in the horizontal position, to simulate an overhead installation on a technical evaluation motor (TEM).

Apodized Pupil Lyot Coronagraphs designs for future segmented space telescopes

NASA Astrophysics Data System (ADS)

St. Laurent, Kathryn; Fogarty, Kevin; Zimmerman, Neil; N’Diaye, Mamadou; Stark, Chris; Sivaramakrishnan, Anand; Pueyo, Laurent; Vanderbei, Robert; Soummer, Remi

2018-01-01

A coronagraphic starlight suppression system situated on a future flagship space observatory offers a promising avenue to image Earth-like exoplanets and search for biomarkers in their atmospheric spectra. One NASA mission concept that could serve as the platform to realize this scientific breakthrough is the Large UV/Optical/IR Surveyor (LUVOIR). Such a mission would also address a broad range of topics in astrophysics with a multi-wavelength suite of instruments.In support of the community’s assessment of the scientific capability of a LUVOIR mission, the Exoplanet Exploration Program (ExEP) has launched a multi-team technical study: Segmented Coronagraph Design and Analysis (SCDA). The goal of this study is to develop viable coronagraph instrument concepts for a LUVOIR-type mission. Results of the SCDA effort will directly inform the mission concept evaluation being carried out by the LUVOIR Science and Technology Definition Team. The apodized pupil Lyot coronagraph (APLC) is one of several coronagraph design families that the SCDA study is assessing. The APLC is a Lyot-style coronagraph that suppresses starlight through a series of amplitude operations on the on-axis field. Given a suite of seven plausible segmented telescope apertures, we have developed an object-oriented software toolkit to automate the exploration of thousands of APLC design parameter combinations. In the course of exploring this parameter space we have established relationships between APLC throughput and telescope aperture geometry, Lyot stop, inner working angle, bandwidth, and contrast level. In parallel with the parameter space exploration, we have investigated several strategies to improve the robustness of APLC designs to fabrication and alignment errors and integrated a Design Reference Mission framework to evaluate designs with scientific yield metrics.

Integrated Baseline System (IBS), Version 1. 03. [Chemical Stockpile Emergency Preparedness Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bailey, B.M.; Burford, M.J.; Downing, T.R.

The Integrated Baseline System (IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planing and analysis. This document is the user guide for the IBS and explains how to operate the IBS system. The fundamental function of the IBS is to provide tools that civilian emergency management personnel can use in developing emergency plans and in supporting emergency management activities to cope with a chemical-releasing event at a military chemical stockpile. Emergency management planners can evaluate concepts and ideas using the IBS system. The results of that experience can then be factoredmore » into refining requirements and plans. This document provides information for the general system user, and is the primary reference for the system features of the IBS. It is designed for persons who are familiar with general emergency management concepts, operations, and vocabulary. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other LBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary. IBS is a dynamic system. Its capabilities are in a state of continuing expansion and enhancement.« less

Micro-satellites thermal control—concepts and components

NASA Astrophysics Data System (ADS)

Baturkin, Volodymyr

2005-01-01

The main idea of this paper is to present the survey of current tendencies in micro-satellites thermal control concepts that can be rational and useful for posterior missions due to intensive expansion of satellites of such type. For this purpose, the available references and lessons learned by the National Technical University of Ukraine during the elaboration of thermal control hardware for micro-satellites Magion 4, 5, BIRD and autonomous thermal control systems for interplanetary missions VEGA, PHOBOS have been used. The main parameters taken into consideration for analysis are the satellite sizes, mass, power consumption, orbit parameters, altitude control peculiarities and thermal control description. It was defined that passive thermal control concepts are widely used, excepting autonomous temperature regulation for sensitive components such as batteries, high-precision optics, and some types of sensors. The practical means for realization of passive thermal control design as multi-layer insulation, optical coatings, heat conductive elements, gaskets are briefly described.

Perspective: Structural fluctuation of protein and Anfinsen's thermodynamic hypothesis

NASA Astrophysics Data System (ADS)

Hirata, Fumio; Sugita, Masatake; Yoshida, Masasuke; Akasaka, Kazuyuki

2018-01-01

The thermodynamics hypothesis, casually referred to as "Anfinsen's dogma," is described theoretically in terms of a concept of the structural fluctuation of protein or the first moment (average structure) and the second moment (variance and covariance) of the structural distribution. The new theoretical concept views the unfolding and refolding processes of protein as a shift of the structural distribution induced by a thermodynamic perturbation, with the variance-covariance matrix varying. Based on the theoretical concept, a method to characterize the mechanism of folding (or unfolding) is proposed. The transition state, if any, between two stable states is interpreted as a gap in the distribution, which is created due to an extensive reorganization of hydrogen bonds among back-bone atoms of protein and with water molecules in the course of conformational change. Further perspective to applying the theory to the computer-aided drug design, and to the material science, is briefly discussed.

Internet addiction: reappraisal of an increasingly inadequate concept.

PubMed

Starcevic, Vladan; Aboujaoude, Elias

2017-02-01

This article re-examines the popular concept of Internet addiction, discusses the key problems associated with it, and proposes possible alternatives. The concept of Internet addiction is inadequate for several reasons. Addiction may be a correct designation only for the minority of individuals who meet the general criteria for addiction, and it needs to be better demarcated from various patterns of excessive or abnormal use. Addiction to the Internet as a medium does not exist, although the Internet as a medium may play an important role in making some behaviors addictive. The Internet can no longer be separated from other potentially overused media, such as text messaging and gaming platforms. Internet addiction is conceptually too heterogeneous because it pertains to a variety of very different behaviors. Internet addiction should be replaced by terms that refer to the specific behaviors (eg, gaming, gambling, or sexual activity), regardless of whether these are performed online or offline.

Workplace Challenges: The Impact of Personal Beliefs and the Birth Environment.

PubMed

Adams, Ellise D

This article reviews 2 workplace challenges faced by the perinatal nurse: the impact of personal beliefs and issues within the birth environment. It also explores how these challenges inform the birth practices of the perinatal nurse. The methods employed for this review are focus groups and a concept analysis. Two focus groups (n = 14) and a concept analysis based on a process defined by Walker and Avant provided a set of birth practices performed by the perinatal nurse who facilitates normal birth. Assertiveness was identified as a primary attribute of the perinatal nurse and several suggestions are identified as empirical referents or methods of measuring the abstract concepts, to identify the workplace challenges of the perinatal nurse. Development of effective processes, designed to overcome the many challenges facing the perinatal nurse, will assist in improving perinatal care for women and newborns.

Verbal and Math Self-Concepts: An Extension of the Internal/External Frame of Reference Model.

ERIC Educational Resources Information Center

Marsh, Herbert W.; Byrne, Barbara M.

The internal/external (I/E) frame of reference model describes relations among Verbal self-concept (VSC), Math self-concept (MSC), and corresponding achievement scores (VACH, MACH). In support of the model Marsh (1986) found that: (1) VSC and MSC were nearly uncorrelated; (2) the effect of VACH on VSC, and of MACH on MSC, were positive; but (3)…

THE CONCEPT OF REFERENCE CONDITION, REVISITED

EPA Science Inventory

Ecological assessments of aquatic ecosystems depend on the ability to compare current conditions against some expectation of how they could be in the absence of significant human disturbance. The concept of a ‘‘reference condition’’ is often used to descri...

Optimizing product life cycle processes in design phase

NASA Astrophysics Data System (ADS)

Faneye, Ola. B.; Anderl, Reiner

2002-02-01

Life cycle concepts do not only serve as basis in assisting product developers understand the dependencies between products and their life cycles, they also help in identifying potential opportunities for improvement in products. Common traditional concepts focus mainly on energy and material flow across life phases, necessitating the availability of metrics derived from a reference product. Knowledge of life cycle processes won from an existing product is directly reused in its redesign. Depending on sales volume nevertheless, the environmental impact before product optimization can be substantial. With modern information technologies today, computer-aided life cycle methodologies can be applied well before product use. On the basis of a virtual prototype, life cycle processes are analyzed and optimized, using simulation techniques. This preventive approach does not only help in minimizing (or even eliminating) environmental burdens caused by product, costs incurred due to changes in real product can also be avoided. The paper highlights the relationship between product and life cycle and presents a computer-based methodology for optimizing the product life cycle during design, as presented by SFB 392: Design for Environment - Methods and Tools at Technical University, Darmstadt.

Robotic lunar surface operations: Engineering analysis for the design, emplacement, checkout and performance of robotic lunar surface systems

NASA Technical Reports Server (NTRS)

Woodcock, Gordon R.

1990-01-01

The assembly, emplacement, checkout, operation, and maintenance of equipment on planetary surfaces are all part of expanding human presence out into the solar system. A single point design, a reference scenario, is presented for lunar base operations. An initial base, barely more than an output, which starts from nothing but then quickly grows to sustain people and produce rocket propellant. The study blended three efforts: conceptual design of all required surface systems; assessments of contemporary developments in robotics; and quantitative analyses of machine and human tasks, delivery and work schedules, and equipment reliability. What emerged was a new, integrated understanding of hot to make a lunar base happen. The overall goal of the concept developed was to maximize return, while minimizing cost and risk. The base concept uses solar power. Its primary industry is the production of liquid oxygen for propellant, which it extracts from native lunar regolith. Production supports four lander flights per year, and shuts down during the lunar nighttime while maintenance is performed.

Comparison of complex and parsimonious model structures by means of a modular hydrological model concept

NASA Astrophysics Data System (ADS)

Holzmann, Hubert; Massmann, Carolina

2015-04-01

A plenty of hydrological model types have been developed during the past decades. Most of them used a fixed design to describe the variable hydrological processes assuming to be representative for the whole range of spatial and temporal scales. This assumption is questionable as it is evident, that the runoff formation process is driven by dominant processes which can vary among different basins. Furthermore the model application and the interpretation of results is limited by data availability to identify the particular sub-processes, since most models were calibrated and validated only with discharge data. Therefore it can be hypothesized, that simpler model designs, focusing only on the dominant processes, can achieve comparable results with the benefit of less parameters. In the current contribution a modular model concept will be introduced, which allows the integration and neglection of hydrological sub-processes depending on the catchment characteristics and data availability. Key elements of the process modules refer to (1) storage effects (interception, soil), (2) transfer processes (routing), (3) threshold processes (percolation, saturation overland flow) and (4) split processes (rainfall excess). Based on hydro-meteorological observations in an experimental catchment in the Slovak region of the Carpathian mountains a comparison of several model realizations with different degrees of complexity will be discussed. A special focus is given on model parameter sensitivity estimated by Markov Chain Monte Carlo approach. Furthermore the identification of dominant processes by means of Sobol's method is introduced. It could be shown that a flexible model design - and even the simple concept - can reach comparable and equivalent performance than the standard model type (HBV-type). The main benefit of the modular concept is the individual adaptation of the model structure with respect to data and process availability and the option for parsimonious model design.

Repetition reduction during word and concept overlap in bilinguals

PubMed Central

Lam, Tuan Q.; Marian, Viorica

2015-01-01

In natural conversation, speakers often mention the same referents multiple times. While referents that have been previously mentioned are produced with less prominence than those that have not been mentioned, it is unclear whether prominence reduction is due to repetition of concepts, words, or a combination of the two. In the current study, we dissociate these sources of repetition by examining bilingual speakers, who have more than one word for the same concept across their two languages. Three groups of Korean-English bilinguals (balanced, English-dominant, and Korean-dominant) performed an event description task involving repetition of referents within a single language (i.e., repetition of word and concept) or across languages (i.e., repetition of concept only). While balanced bilinguals reduced prominence both within and across languages, unbalanced bilinguals only reduced prominence when repetition occurred within a language. These patterns suggest that the degree to which words and concepts are linked within a speaker’s language system determines the source of repetition reduction. PMID:26166943

Conception preliminaire de disques de turbine axiale pour moteurs d'aeronefs

NASA Astrophysics Data System (ADS)

Ouellet, Yannick

The preliminary design phase of a turbine rotor has an important impact on the architecture of a new engine definition, as it sets the technical orientation right from start and provides a good estimate of product performance, weight and cost. In addition, the execution speed at this preliminary phase has become critical into capturing business opportunities. Improving upfront accuracy also alleviates downstream detailed design work and therefore reduces overall product development cycle time. This preliminary phase contains elements slowing down its process, including low interoperability of currently used systems, incompatibility of software and ineffective management of data. In order to overcome these barriers, we have developed the first module of a new Design and Analysis (D&A) platform for the rotor disc. This complete platform ensures integration of different tools processing in batch mode, and is driven from a single graphical user interface. The platform developed has been linked with different optimization methods (algorithms, configuration) in order to automate the disc design and propose best practices for rotor structural optimization. This methodology allowed reduction in design cycle time and improvement of performance. It was applied on two reference P&WC axial discs. The platform's architecture was also used in the development of reference charts to better understand disc performance within given design space. Four high pressure rotor discs of P&WC turbofan and turboprop engines were used to generate the technical charts and understand the effect of various parameters. The new tools supporting disc D&A, combined with the optimization process and reference charts, has proven to be profitable in terms of component performance and engineering effort inputs.

Design Quality in the Context of Healthcare Environments: A Scoping Review.

PubMed

Anåker, Anna; Heylighen, Ann; Nordin, Susanna; Elf, Marie

2017-07-01

We explored the concept of design quality in relation to healthcare environments. In addition, we present a taxonomy that illustrates the wide range of terms used in connection with design quality in healthcare. High-quality physical environments can promote health and well-being. Developments in healthcare technology and methodology put high demands on the design quality of care environments, coupled with increasing expectations and demands from patients and staff that care environments be person centered, welcoming, and accessible while also supporting privacy and security. In addition, there are demands that decisions about the design of healthcare architecture be based on the best available information from credible research and the evaluation of existing building projects. The basic principles of Arksey and O'Malley's model of scoping review design were used. Data were derived from literature searches in scientific databases. A total of 18 articles and books were found that referred to design quality in a healthcare context. Design quality of physical healthcare environments involves three different themes: (i) environmental sustainability and ecological values, (ii) social and cultural interactions and values, and (iii) resilience of the engineering and building construction. Design quality was clarified herein with a definition. Awareness of what is considered design quality in relation to healthcare architecture could help to design healthcare environments based on evidence. To operationalize the concept, its definition must be clear and explicit and able to meet the complex needs of the stakeholders in a healthcare context, including patients, staff, and significant others.

Feasibility of Using the Space Shuttle to Conduct Global Geomagnetic Surveys (Phase I - Retrievable Probes)

DTIC Science & Technology

1985-07-01

Datatape Division 4-1 5.0 REFERENCES Acuna, M.H. et. al., The MAGSAT Vector Magnetometer - A Precision Fluxgate Magnetometer for the Measurement of the...charting would consist of a triaxial, mutually orthogonal fluxgate magnetometer and an absolute scalar magnetometer to check the flux- gates drift...While space-ready, triaxial fluxgate magnetometers are not an off-the-shelf item, their design concepts are well understood. Their resolution of less

Extraterrestrial processing and manufacturing of large space systems, volume 1, chapters 1-6

NASA Technical Reports Server (NTRS)

Miller, R. H.; Smith, D. B. S.

1979-01-01

Space program scenarios for production of large space structures from lunar materials are defined. The concept of the space manufacturing facility (SMF) is presented. The manufacturing processes and equipment for the SMF are defined and the conceptual layouts are described for the production of solar cells and arrays, structures and joints, conduits, waveguides, RF equipment radiators, wire cables, and converters. A 'reference' SMF was designed and its operation requirements are described.

Utilizing Arc Marine Concepts for Designing a Geospatially Enabled Database to Support Rapid Environmental Assessment

DTIC Science & Technology

2009-07-01

data were recognized as being largely geospatial and thus a GIS was considered the most reasonable way to proceed. The Postgre suite of software also...for the ESRI (2009) geodatabase environment but is applicable for this Postgre -based system. We then introduce and discuss spatial reference...PostgreSQL database using a Postgre ODBC connection. This procedure identified 100 tables with 737 columns. This is after the removal of two

Guided inquiry lab exercises in development and oxygen consumption using zebrafish.

PubMed

Bagatto, Brian

2009-06-01

Zebrafish have become a model organism in many areas of research and are now being used with more frequency in the classroom to teach important biological concepts. The two guided inquiry exercises in this article are each aimed at a different level of instruction, but each can be modified to fit the needs of many high school or college-level courses. The "Zebrafish Development and Environment" exercise teaches high school students about zebrafish development by presenting a series of embryos at different ages. Without access to visual references, students are asked to rank developing zebrafish by age and explain their choices. The students also learn about the heart and circulatory system and the effects of temperature on physiological processes. The second exercise, "Oxygen Consumption," is a 2-week laboratory designed for introductory college biology majors and involves the concept of oxygen consumption as a predictor of metabolic rate. During the first week of lab, students are introduced to the concept and learn how to measure oxygen consumption in zebrafish. In the second week, they perform an instructor-approved experiment of their own design, analyze the results using statistics, and write a report.

The social space of empowerment within epilepsy services: The map is not the terrain.

PubMed

Bennett, Louise; Bergin, Michael; Wells, John S G

2016-03-01

Empowerment is now seen as an integral component of holistic practice and service design in healthcare, particularly as it relates to the improvement of quality of life for people with epilepsy. However, the literature suggests that empowerment is a neglected and poorly understood concept by service users and providers alike within epilepsy services. Conceptual ambiguity is a further impediment to its understanding and implementation. Bearing this in mind, a clear definition of empowerment is needed in order to realistically recognize, encourage, and prioritize empowerment as a service design philosophy. Therefore, this paper undertakes a concept analysis of empowerment with reference to epilepsy services. Results indicate that empowerment demands a transformation of consciousness and a readiness to act on this transformation in order to allow people to gain personal power and autonomy over their own life, including the self-management of their condition. With this in mind, a critical reflection on the 'micro' and 'macro' levels of power that exist within epilepsy services is warranted with reference to theoretical principles. In this context although the map is not the terrain, we argue that an educational intervention guided by critical social theory principles has the potential to encourage an understanding of empowerment and 'holds the key' to future advances for its implementation within epilepsy services. Copyright © 2016 Elsevier Inc. All rights reserved.

Ares V: Shifting the Payload Design Paradigm

NASA Technical Reports Server (NTRS)

Summrall, Phil; Creech, Steve

2009-01-01

NASA's Ares V heavy-lift cargo launch vehicle is being designed send more crew and cargo to more places on the lunar surface than the 1960s-era Apollo program and provide ongoing support to a permanent lunar outpost. In addition to that role, however, its unmatched mass and volume capability represent a global asset for exploration, science, and commerce. The Ares V also is an enabler of a large class of space missions not thought possible by scientists and engineers since the Saturn V program ended over 30 years ago. Compared to current systems, it will offer approximately 5 times the mass and volume to most orbits and locations. This should allow prospective mission planners to build robust payloads with margins that are 3 to 5 times the industry norm. The space inside the planned payload shroud has enough usable volume to launch the volumetric equivalent of approximately 10 Apollo Lunar Excursion Modules or approximately 5 equivalent Hubble Space Telescopes. This mass and volume capability to Low Earth Orbit enables a host of new scientific and observation platforms, such as telescopes, satellites, planetary and solar missions, as well as being able to provide the lift for future large in-space infrastructure missions, such as space based power and mining, Earth asteroid defense, propellant depots, etc. The Ares V team is engaging the potential payload community now, 2-3 years before System Requirements Review, in order to better understand the potential limitations and or additional requirements that could be added to the Ares V from the mission planning community. If a viable mission is determined and added to the Ares V as a design case, tradeoffs will be conducted to determine if other mission design requirements can be included in the system. Multiple shroud options for the Ares V have been analyzed to identify their impact on performance. Ares V is in a conceptual design stage prior to a formal design phase. The initial concept for the cargo launch vehicle (CaLV) that would later be dubbed "Ares V" was produced by the Exploration Systems Architecture Study in 2005. Since then, it has evolved through hundreds of concepts. The current point-of-departure (POD) concept was approved during the Lunar Capabilities Concept Review/Ares V Mission Concept Review in June 2008. This reference concept serves as a starting point for a renewed set of design trades and detailed analysis into its interaction with the other components of the Constellation architecture and existing launch infrastructure. This paper will discuss the Ares V design evolution, the most recent point-of-departure concept, and its capabilities to support future science missions.

Measurements and Predictions for a Distributed Exhaust Nozzle

NASA Technical Reports Server (NTRS)

Kinzie, Kevin W.; Brown, Martha C.; Schein, David B.; Solomon, W. David, Jr.

2001-01-01

The acoustic and aerodynamic performance characteristics of a distributed exhaust nozzle (DEN) design concept were evaluated experimentally and analytically with the purpose of developing a design methodology for developing future DEN technology. Aerodynamic and acoustic measurements were made to evaluate the DEN performance and the CFD design tool. While the CFD approach did provide an excellent prediction of the flowfield and aerodynamic performance characteristics of the DEN and 2D reference nozzle, the measured acoustic suppression potential of this particular DEN was low. The measurements and predictions indicated that the mini-exhaust jets comprising the distributed exhaust coalesced back into a single stream jet very shortly after leaving the nozzles. Even so, the database provided here will be useful for future distributed exhaust designs with greater noise reduction and aerodynamic performance potential.

Design Study for a Mars Geyser Hopper

NASA Technical Reports Server (NTRS)

Landis, Geoffrey A.; Oleson, Steven J.; McGuire, Melissa

2012-01-01

The Mars Geyser Hopper is a design reference missions (DRMs) for a Discovery-class spacecraft using Advanced Stirling Radioisotope Generator (ASRG) power source. The Geyser Hopper is a mission concept that will investigate the springtime carbon-dioxide geysers found in regions around the south pole of Mars. The Geyser Hopper design uses Phoenix heritage systems and approach, but uses a single ASRG as the power source, rather than twin solar arrays, and is designed to last over a one-year stay on the South Pole. The spacecraft will land at a target landing area near the south pole of Mars, and have the ability to "hop" after a summertime landing to reposition itself close to a geyser site, and wait through the winter until the first sunlight of spring to witness first-hand the geyser phenomenon.

Ergonomic design in ancient Greece.

PubMed

Marmaras, N; Poulakakis, G; Papakostopoulos, V

1999-08-01

Although the science of ergonomics did not actually emerge until the 20th century, there is evidence to suggest that ergonomic principles were in fact known and adhered to 25 centuries ago. The study reported here is a first attempt to research the ergonomics concerns of ancient Greeks, on both a conceptual and a practical level. On the former we present a collection of literature references to the concepts of usability and human-centred design. On the latter, examples of ergonomic design from a variety of fields are analysed. The fields explored here include the design of everyday utensils, the sculpture and manipulation of marble as a building material and the design of theatres. Though hardly exhaustive, these examples serve to demonstrate that the ergonomics principles, in content if not in name, actually emerged a lot earlier than is traditionally thought.

IT behind a platform for Translational Cancer Research - concept and objectives.

PubMed

Steffens, Michael; Husmann, Gabriele; Koca, Mithat; Lablans, Martin; Komor, Martina; Zeissig, Sylke; Emrich, Katharina; Brandts, Christian; Serve, Hubert; Blettner, Maria; Uckert, Frank

2012-01-01

The German Consortium for Translational Cancer Research (DKTK) and the Rhine-Main Translational Cancer Research Network (RM-TCRN) are designed to exploit large population cohorts of cancer patients for the purpose of bio-banking, clinical trials, and clinical cancer registration. Hence, the success of these platforms is heavily dependent on the close interlinking of clinical data from cancer patients, information from study registries, and data from bio-banking systems of different laboratories and scientific institutions. This article referring to the poster discusses the main challenges of the platforms from an information technology point of view, legal and data security issues, and outlines an integrative IT-concept concerning a decentralized, distributed search approach where data management and search is in compliance with existing legislative rules.

Metrology Standards for Quantitative Imaging Biomarkers

PubMed Central

Obuchowski, Nancy A.; Kessler, Larry G.; Raunig, David L.; Gatsonis, Constantine; Huang, Erich P.; Kondratovich, Marina; McShane, Lisa M.; Reeves, Anthony P.; Barboriak, Daniel P.; Guimaraes, Alexander R.; Wahl, Richard L.

2015-01-01

Although investigators in the imaging community have been active in developing and evaluating quantitative imaging biomarkers (QIBs), the development and implementation of QIBs have been hampered by the inconsistent or incorrect use of terminology or methods for technical performance and statistical concepts. Technical performance is an assessment of how a test performs in reference objects or subjects under controlled conditions. In this article, some of the relevant statistical concepts are reviewed, methods that can be used for evaluating and comparing QIBs are described, and some of the technical performance issues related to imaging biomarkers are discussed. More consistent and correct use of terminology and study design principles will improve clinical research, advance regulatory science, and foster better care for patients who undergo imaging studies. © RSNA, 2015 PMID:26267831

Technical and economic assessment of span-distributed loading cargo aircraft concepts

NASA Technical Reports Server (NTRS)

Whitlow, D. H.; Whitner, P. C.

1976-01-01

A preliminary design study of the performance and economics resulting from the application of the distributed load concept to large freighter aircraft was made. The study was limited to configurations having the payload entirely contained in unswept wings of constant chord with conventional tail surfaces supported from the wing by twin booms. A parametric study based on current technology showed that increases in chord had a similar effect on the economics as increases in span. Increases in both span and chord or airplane size had the largest and most favorable effect. At 600,000 lbs payload a configuration was selected and refined to incorporate advanced technology that could be in production by 1990 and compared with a reference conventional airplane having similar technology.

Adiabatic diesel engine component development: Reference engine for on-highway applications

NASA Technical Reports Server (NTRS)

Hakim, Nabil S.

1986-01-01

The main objectives were to select an advanced low heat rejection diesel reference engine (ADRE) and to carry out systems analysis and design. The ADRE concept selection consisted of: (1) rated point performance optimization; (2) study of various exhaust energy recovery scenarios; (3) components, systems and engine configuration studies; and (4) life cycle cost estimates of the ADRE economic worth. The resulting ADRE design proposed a reciprocator with many advanced features for the 1995 technology demonstration time frame. These included ceramic air gap insulated hot section structural components, high temperature tribology treatments, nonmechanical (camless) valve actuation systems, and elimination of the cylinder head gasket. ADRE system analysis and design resulted in more definition of the engine systems. These systems include: (1) electro-hydraulic valve actuation, (2) electronic common rail injection system; (3) engine electronic control; (4) power transfer for accessory drives and exhaust energy recovery systems; and (5) truck installation. Tribology and performance assessments were also carried out. Finite element and probability of survival analyses were undertaken for the ceramic low heat rejection component.

VLSI realization of learning vector quantization with hardware/software co-design for different applications

NASA Astrophysics Data System (ADS)

An, Fengwei; Akazawa, Toshinobu; Yamasaki, Shogo; Chen, Lei; Jürgen Mattausch, Hans

2015-04-01

This paper reports a VLSI realization of learning vector quantization (LVQ) with high flexibility for different applications. It is based on a hardware/software (HW/SW) co-design concept for on-chip learning and recognition and designed as a SoC in 180 nm CMOS. The time consuming nearest Euclidean distance search in the LVQ algorithm’s competition layer is efficiently implemented as a pipeline with parallel p-word input. Since neuron number in the competition layer, weight values, input and output number are scalable, the requirements of many different applications can be satisfied without hardware changes. Classification of a d-dimensional input vector is completed in n × \\lceil d/p \\rceil + R clock cycles, where R is the pipeline depth, and n is the number of reference feature vectors (FVs). Adjustment of stored reference FVs during learning is done by the embedded 32-bit RISC CPU, because this operation is not time critical. The high flexibility is verified by the application of human detection with different numbers for the dimensionality of the FVs.

Crossing boundaries in interprofessional education: A call for instructional integration of two script concepts.

PubMed

Kiesewetter, Jan; Kollar, Ingo; Fernandez, Nicolas; Lubarsky, Stuart; Kiessling, Claudia; Fischer, Martin R; Charlin, Bernard

2016-09-01

Clinical work occurs in a context which is heavily influenced by social interactions. The absence of theoretical frameworks underpinning the design of collaborative learning has become a roadblock for interprofessional education (IPE). This article proposes a script-based framework for the design of IPE. This framework provides suggestions for designing learning environments intended to foster competences we feel are fundamental to successful interprofessional care. The current literature describes two script concepts: "illness scripts" and "internal/external collaboration scripts". Illness scripts are specific knowledge structures that link general disease categories and specific examples of diseases. "Internal collaboration scripts" refer to an individual's knowledge about how to interact with others in a social situation. "External collaboration scripts" are instructional scaffolds designed to help groups collaborate. Instructional research relating to illness scripts and internal collaboration scripts supports (a) putting learners in authentic situations in which they need to engage in clinical reasoning, and (b) scaffolding their interaction with others with "external collaboration scripts". Thus, well-established experiential instructional approaches should be combined with more fine-grained script-based scaffolding approaches. The resulting script-based framework offers instructional designers insights into how students can be supported to develop the necessary skills to master complex interprofessional clinical situations.

Self-Sustaining Thorium Boiling Water Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greenspan, Ehud; Gorman, Phillip M.; Bogetic, Sandra

The primary objectives of this project are to: Perform a pre-conceptual design of a core for an alternative to the Hitachi proposed fuel-self- sustaining RBWR-AC, to be referred to as a RBWR-Th. The use of thorium fuel is expected to assure negative void coefficient of reactivity (versus positive of the RBWR-AC) and improve reactor safety; Perform a pre-conceptual design of an alternative core to the Hitachi proposed LWR TRU transmuting RBWR-TB2, to be referred to as the RBWR-TR. In addition to improved safety, use of thorium for the fertile fuel is expected to improve the TRU transmutation effectiveness; Compare themore » RBWR-Th and RBWR-TR performance against that of the Hitachi RBWR core designs and sodium cooled fast reactor counterparts - the ARR and ABR; and, Perform a viability assessment of the thorium-based RBWR design concepts to be identified along with their associated fuel cycle, a technology gap analysis, and a technology development roadmap. A description of the work performed and of the results obtained is provided in this Overview Report and, in more detail, in the Attachments. The major findings of the study are summarized.« less

Mapping Children--Mapping Space.

ERIC Educational Resources Information Center

Pick, Herbert L., Jr.

Research is underway concerning the way the perception, conception, and representation of spatial layout develops. Three concepts are important here--space itself, frame of reference, and cognitive map. Cognitive map refers to a form of representation of the behavioral space, not paired associate or serial response learning. Other criteria…

A time reference distribution concept for a time division communication network

NASA Technical Reports Server (NTRS)

Stover, H. A.

1973-01-01

Starting with an assumed ideal network having perfect clocks at every node and known fixed transmission delays between nodes, the effects of adding tolerances to both transmission delays and nodal clocks is described. The advantages of controlling tolerances on time rather than frequency are discussed. Then a concept is presented for maintaining these tolerances on time throughout the network. This concept, called time reference distribution, is a systematic technique for distributing time reference to all nodes of the network. It is reliable, survivable and possesses many other desirable characteristics. Some of its features such as an excellent self monitoring capability will be pointed out. Some preliminary estimates of the accuracy that might be expected are developed and there is a brief discussion of the impact upon communication system costs. Time reference distribution is a concept that appears very attractive. It has not had experimental evaluation and has not yet been endorsed for use in any communication network.

Synthetic biology through biomolecular design and engineering.

PubMed

Channon, Kevin; Bromley, Elizabeth H C; Woolfson, Derek N

2008-08-01

Synthetic biology is a rapidly growing field that has emerged in a global, multidisciplinary effort among biologists, chemists, engineers, physicists, and mathematicians. Broadly, the field has two complementary goals: To improve understanding of biological systems through mimicry and to produce bio-orthogonal systems with new functions. Here we review the area specifically with reference to the concept of synthetic biology space, that is, a hierarchy of components for, and approaches to generating new synthetic and functional systems to test, advance, and apply our understanding of biological systems. In keeping with this issue of Current Opinion in Structural Biology, we focus largely on the design and engineering of biomolecule-based components and systems.

In-Space Transportation for GEO Space Solar Power Satellites

NASA Technical Reports Server (NTRS)

Martin, James A.; Donnahue, Benjamin B.; Henley, Mark W.

1999-01-01

This report summarizes results of study tasks to evaluate design options for in-space transportation of geostationary Space Solar Power Satellites. Referring to the end-to-end architecture studies performed in 1988, this current activity focuses on transportation of Sun Tower satellite segments from an initial low Earth orbit altitude to a final position in geostationary orbit (GEO; i.e., 35,786 km altitude, circular, equatorial orbit). This report encompasses study activity for In-Space Transportation of GEO Space Solar Power (SSP) Satellites including: 1) assessment of requirements, 2) design of system concepts, 3) comparison of alternative system options, and 4) assessment of potential derivatives.

Phase change references for in-flight recalibration of orbital thermometry

NASA Astrophysics Data System (ADS)

Topham, T. S.; Latvakoski, H.; Watson, M.

2013-09-01

Several critical questions need to be answered to determine the potential utility of phase change materials as long-term orbital references: How accurate and repeatable will phase change reference implementations be after incorporating necessary design trade-offs to accommodate launch and the space environment? How can the temperature of phase transitions be transferred to something useful for calibration such as a black body. How, if at all, will the microgravity environment affect the phase transitions? To help answer some of these questions, three experiments will be conducted on the International Space Station (ISS). The experiments will test melts and freezes of three different phase change materials in various containment apparatus. This paper addresses the current status of the ISS experiments, as well as results from ground testing of several concepts for space application of PCM recalibration systems in the CORSAIR (Calibration Observations of Radiance Spectra in the far Infrared) black body.

Satellite Power Study (SPS) concept definition study (Exhibit D). Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1981-01-01

Efforts concentrated on updating of the Rockwell reference concept, definition of new system options, studies of special emphasis topics, further definition of the transportation system, and further program definition. The Rockwell reference satellite concept has a gallium arsenide (GaAs) solar cell array having flat concentrators with an effective concentration ratio of 1.83at end of life. Alternatives to this concept includes solid state power amplifiers or magnetrons for dc/RF conversion and multibandgap solar cells for solar to dc energy conversion. Two solid state concepts were studied. It was determined that the magnetron approach was the lowest mass and cost system.

Solar Array Structures for 300 kW-Class Spacecraft

NASA Technical Reports Server (NTRS)

Pappa, Richard; Rose, Geoff; Mann, Troy O.; Warren, Jerry E.; Mikulas, Martin M., Jr.; Kerslake, Tom; Kraft, Tom; Banik, Jeremy

2013-01-01

State-of-the-art solar arrays for spacecraft provide on the order of 20 kW of electrical power, and they usually consist of 3J solar cells bonded to hinged rigid panels about 1 inch in thickness. This structural construction allows specific mass and packaging volumes of up to approximately 70 W/kg and 15 kW/m3 to be achieved. Significant advances in solar array structures are required for future very-high-power spacecraft (300+ kW), such as those proposed for pre-positioning heavy cargo on or near the Moon, Mars, or asteroids using solar electric propulsion. These applications will require considerable increases in both W/kg and kW/m3, and will undoubtedly require the use of flexible-substrate designs. This presentation summarizes work sponsored by NASA's Game Changing Development Program since Oct. 2011 to address the challenge of developing 300+ kW solar arrays. The work is primarily being done at NASA Langley, NASA Glenn, and two contractor teams (ATK and DSS), with technical collaboration from AFRL/Kirtland. The near-tem objective of the project is design, analysis, and testing of 30-50 kW solar array designs that are extensible to the far-term objective of 300+ kW. The work is currently focused on three designs: the MegaFlex concept by ATK, the Mega-ROSA concept by DSS, and an in-house 300-kW Government Reference Array concept. Each of these designs will be described in the presentation. Results obtained to date by the team, as well as future work plans, for the design, analysis, and testing of these large solar array structures will be summarized.

DRACO Flowpath Performance and Environments

NASA Technical Reports Server (NTRS)

Komar, D. R.; McDonald, Jon

1999-01-01

The Advanced Space Transportation (AST) project office has challenged NASA to design, manufacture, ground-test and flight-test an axisymmetric, hydrocarbon-fueled, flight-weight, ejector-ramjet engine system testbed no later than 2005. To accomplish this, a multi-center NASA team has been assembled. The goal of this team, led by NASA-Marshall Space Flight Center (MSFC), is to develop propulsion technologies that demonstrate rocket and airbreathing combined-cycle operation (DRACO). Current technical activities include flowpath conceptual design, engine systems conceptual design, and feasibility studies investigating the integration and operation of the DRACO engine with a Lockheed D-21B drone. This paper focuses on the activities of the Flowpath Systems Product Development Team (PDT), led by NASA-Glenn Research Center (GRC) and supported by NASA-MSFC and TechLand Research, Inc. The objective of the Flowpath PDT at the start of the DRACO program was to establish a conceptual design of the flowpath aerodynamic lines, determine the preliminary performance, define the internal environments, and support the DRACO testbed concept feasibility studies. To accomplish these tasks, the PDT convened to establish a baseline flowpath concept. With the conceptual lines defined, cycle analysis tasks were planned and the flowpath performance and internal environments were defined. Additionally, sensitivity studies investigating the effects of inlet reference area, combustion performance, and combustor/nozzle materials selection were performed to support the Flowpath PDT design process. Results of these tasks are the emphasis of this paper and are intended to verify the feasibility of the DRACO flowpath and engine system as well as identify the primary technical challenges inherent in the flight-weight design of an advanced propulsion technology demonstration engine. Preliminary cycle performance decks were developed to support the testbed concept feasibility studies but are not discussed further in this paper.

Experimental evaluation of combustor concepts for burning broad property fuels

NASA Technical Reports Server (NTRS)

Kasper, J. M.; Ekstedt, E. E.; Dodds, W. J.; Shayeson, M. W.

1980-01-01

A baseline CF6-50 combustor and three advanced combustor designs were evaluated to determine the effects of combustor design on operational characteristics using broad property fuels. Three fuels were used in each test: Jet A, a broad property 13% hydrogen fuel, and a 12% hydrogen fuel blend. Testing was performed in a sector rig at true cruise and simulated takeoff conditions for the CF6-50 engine cycle. The advanced combustors (all double annular, lean dome designs) generally exhibited lower metal temperatures, exhaust emissions, and carbon buildup than the baseline CF6-50 combustor. The sensitivities of emissions and metal temperatures to fuel hydrogen content were also generally lower for the advanced designs. The most promising advanced design used premixing tubes in the main stage. This design was chosen for additional testing in which fuel/air ratio, reference velocity, and fuel flow split were varied.

A gravity gradient stabilized solar power satellite design

NASA Technical Reports Server (NTRS)

Bowden, M. L.

1981-01-01

The concept of a solar power satellite (SPS) is reviewed, and a design proposed for such a satellite taking advantage of solar radiation pressure and gravity gradient forces to eliminate much of the structure from the baseline configuration. The SPS design consists of a solar cell array lying in the orbital plane and a free floating mirror above to reflect sunlight down onto it. The structural modes of the solar cell array are analyzed and found to be well within control limitations. Preliminary calculations concerning the free floating mirror and its position-keeping propellant requirements are also performed. A numerical example is presented, which shows that, even in terms of mass only, this configuration is a competitive design when compared to the conventional Department of Energy reference design. Other advantages, such as easier assembly in orbit, lower position-keeping propellant requirements, possibilities for decreasing necessary solar cell area, and longer solar cell life, may make this design superior.

Hybrid deployable support truss designs for LDR

NASA Technical Reports Server (NTRS)

Hedgepeth, J.

1988-01-01

Concepts for a 20-meter diameter Large Deployable Reflector (LDR) deployable truss backup structure, and analytical predictions of its structural characteristics are discussed. The concept shown is referred to as the SIXPAC; It is a combination of the PACTRUSS concept and a single-fold beam, which would make up the desired backup structure. One advantage of retaining the PACTRUSS concept is its packaging density and its capability for synchronous deployment. Various 2-meter hexagonal panel arrangements are possible for this Hybrid PACTRUSS structure depending on the panel-to-structure attachment strategies used. Static analyses of the SIXPAC using various assumptions for truss designs and panel masses of 10 kg sq meters were performed to predict the tip displacement of the structure when supported at the center. The tip displacement ranged from 0.20 to 0.44 mm without the panel mass, and from 0.9 to 3.9 mm with the panel mass (in a 1-g field). The data indicate that the structure can be adequately ground tested to validate its required performance in space, assuming the required performance in space is approximately 100 microns. The static displacement at the tip of the structure when subjected to an angular acceleration of 0.001 rad/sec squared were estimated to range from 0.8 to 7.5 microns, depending on the type of truss elements.

SETTING EXPECTATIONS FOR THE ECOLOGICAL CONDITION OF STREAMS: THE CONCEPT OF REFERENCE CONDITION

EPA Science Inventory

An important component of the biological assessment of stream condition is an evaluation of the direct or indirect effects of human activities or disturbances. The concept of a "reference condition" is increasingly used to describe the standard or benchmark against which current ...

Perinatal Bereavement: A Principle-based Concept Analysis

PubMed Central

FENSTERMACHER, Kimberly; HUPCEY, Judith E.

2013-01-01

Aim This paper is a report of an analysis of the concept of perinatal bereavement. Background The concept of perinatal bereavement emerged in the scientific literature during the 1970s. Perinatal bereavement is a practice based concept, although it is not well defined in the scientific literature and is often intermingled with the concepts of mourning and grief. Design Concept Analysis. Data Sources Using the term ‘perinatal bereavement’ and limits of only English and human, Pub Med and CINAHL were searched to yield 278 available references dating from 1974 – 2011. Articles specific to the experience of perinatal bereavement were reviewed. The final data set was 143 articles. Review Methods The methods of principle-based concept analysis were used. Results reveal conceptual components (antecedents, attributes and outcomes) which are delineated to create a theoretical definition of perinatal bereavement. Results The concept is epistemologically immature, with few explicit definitions to describe the phenomenon. Inconsistency in conceptual meaning threatens the construct validity of measurement tools for perinatal bereavement and contributes to incongruent theoretical definitions. This has implications for both nursing science (how the concept is studied and theoretically integrated) and clinical practice (timing and delivery of support interventions). Conclusions Perinatal bereavement is a multifaceted global phenomenon that follows perinatal loss. Lack of conceptual clarity and lack of a clearly articulated conceptual definition impede the synthesis and translation of research findings into practice. A theoretical definition of perinatal bereavement is offered as a platform for researchers to advance the concept through research and theory development. PMID:23458030

LCOE Baseline for OE Buoy

DOE Data Explorer

Previsic, Mirko; Karthikeyan, Anantha; Lewis, Tony; McCarthy, John

2017-07-26

Capex numbers are in $/kW, Opex numbers in $/kW-yr. Cost Estimates provided herein are based on concept design and basic engineering data and have high levels of uncertainties embedded. This reference economic scenario was done for a very large device version of the OE Buoy technology, which is not presently on Ocean Energy's technology development pathway but will be considered in future business plan development. The DOE reference site condition is considered a low power-density site, compared with many of the planned initial deployment locations for the OE Buoy. Many of the sites considered for the initial commercial deployment of the OE buoy feature much higher wave power densities and shorter period waves. Both of these characteristics will improve the OE buoy's commercial viability.

New insights on SOI Tunnel FETs with low-temperature process flow for CoolCube™ integration

NASA Astrophysics Data System (ADS)

Diaz Llorente, C.; Le Royer, C.; Batude, P.; Fenouillet-Beranger, C.; Martinie, S.; Lu, C.-M. V.; Allain, F.; Colinge, J.-P.; Cristoloveanu, S.; Ghibaudo, G.; Vinet, M.

2018-06-01

This paper reports the fabrication and electrical characterization of planar SOI Tunnel FETs (TFETs) made using a Low-Temperature (LT) process designed for 3D sequential integration. These proof-of-concept TFETs feature junctions obtained by Solid Phase Epitaxy Regrowth (SPER). Their electrical behavior is analyzed and compared to reference samples (regular process using High-Temperature junction formation, HT). Dual ID-VDS measurements verify that the TFET structures present Band-to-Band tunnelling (BTBT) carrier injection and not Schottky Barrier tunnelling. P-mode operating LT TFETs deliver an ON state current similar to that of the HT reference, opening the door towards optimized devices operating with very low threshold voltage VTH and low supply voltage VDD.

High heat transfer oxidizer heat exchanger design and analysis. [RL10-2B engine

NASA Technical Reports Server (NTRS)

Kmiec, Thomas D.; Kanic, Paul G.; Peckham, Richard J.

1987-01-01

The RL10-2B engine, a derivative of the RL10, is capable of multimode thrust operation. This engine operates at two low thrust levels: tank head idle (THI), which is approximately 1 to 2% of full thrust, and pumped idle (PI), which is 10% of full thrust. Operation at THI provides vehicle propellant settling thrust and efficient engine thermal conditioning; PI operation provides vehicle tank pre-pressurization and maneuver thrust for low-g deployment. Stable combustion of the RL10-2B engine during the low thrust operating modes can be accomplished by using a heat exchanger to supply gaseous oxygen to the propellant injector. The oxidizer heat exchanger (OHE) vaporizes the liquid oxygen using hydrogen as the energy source. The design, concept verification testing and analysis for such a heat exchanger is discussed. The design presented uses a high efficiency compact core to vaporize the oxygen, and in the self-contained unit, attenuates any pressure and flow oscillations which result from unstable boiling in the core. This approach is referred to as the high heat transfer design. An alternative approach which prevents unstable boiling of the oxygen by limiting the heat transfer is referred to as the low heat transfer design and is reported in Pratt & Whitney report FR-19135-2.

Border Crossings and Multimodal Composition in the Arts

ERIC Educational Resources Information Center

Morrison, Andrew

2005-01-01

Developmental and development-oriented learning with digital media are discussed in relation to the concepts border crossings and multimodal composition. The first concept refers to a transveral of disciplines and recombinations of elements from them. Local-global relations in knowledge building are covered. The second refers to the collaborative…

An Interdigitated Coupler with Defect Ground Structure

DTIC Science & Technology

2015-07-01

branch-line coupler. In [8], DGS is used to microstrip forward-wave coupler for size–reduction. In fact, DGS have been widely used from the concept put...substantially. REFERENCE [1] Bialkowski M E, Seman N, Leong M S. Design of a compact ultra wideband 3 dB microstrip -slot coupler with high return losses and...Pozar D M. Microwave engineering. John Wiley & Sons, 2009. [4] You S J, Liao W. A multi-layer coupled-line power divider. Antennas , Propagation and EM

Ergonomics as a missing part of sustainability.

PubMed

Pavlovic-Veselinovic, Sonja

2014-01-01

In the last twenty years, terms such as sustainable development, environmental protection, and sustainable design have been widely exploited, often without justification. Does ergonomics have a legitimate need or right to use these terms and to be the part of the process to which they refer? This paper discusses the relationship between ergonomics and the concept of sustainable development and its three elements of sustainability (environmental, social and economic), as the steps ergonomists need to take to secure and strengthen the influence in sustainability topics.

HSCT noise reduction technology development at GE Aircraft Engines

NASA Technical Reports Server (NTRS)

Majjigi, Rudramuni K.

1992-01-01

The topics covered include the following: High Speed Civil Transport (HSCT) exhaust nozzle design approaches; GE aircraft engine (GEAE) HSCT acoustics research; 2DCD non-IVP suppressor ejector; key sensitivities from reference aircraft; acoustic experiments; aero-mixing experimental set-up; fluid shield nozzle; HSCT Mach 2.4 flade nozzle; noise prediction; nozzle concept for GE/Boeing joint test; scale model hot core flow path modified to prevent hub-choking CFL3-D solution; HSCT exhaust nozzle status; and key acoustic technology issues for HSCT's.

HSCT noise reduction technology development at GE Aircraft Engines

NASA Astrophysics Data System (ADS)

Majjigi, Rudramuni K.

1992-04-01

The topics covered include the following: High Speed Civil Transport (HSCT) exhaust nozzle design approaches; GE aircraft engine (GEAE) HSCT acoustics research; 2DCD non-IVP suppressor ejector; key sensitivities from reference aircraft; acoustic experiments; aero-mixing experimental set-up; fluid shield nozzle; HSCT Mach 2.4 flade nozzle; noise prediction; nozzle concept for GE/Boeing joint test; scale model hot core flow path modified to prevent hub-choking CFL3-D solution; HSCT exhaust nozzle status; and key acoustic technology issues for HSCT's.

Biological Signal Processing with a Genetic Toggle Switch

PubMed Central

Hillenbrand, Patrick; Fritz, Georg; Gerland, Ulrich

2013-01-01

Complex gene regulation requires responses that depend not only on the current levels of input signals but also on signals received in the past. In digital electronics, logic circuits with this property are referred to as sequential logic, in contrast to the simpler combinatorial logic without such internal memory. In molecular biology, memory is implemented in various forms such as biochemical modification of proteins or multistable gene circuits, but the design of the regulatory interface, which processes the input signals and the memory content, is often not well understood. Here, we explore design constraints for such regulatory interfaces using coarse-grained nonlinear models and stochastic simulations of detailed biochemical reaction networks. We test different designs for biological analogs of the most versatile memory element in digital electronics, the JK-latch. Our analysis shows that simple protein-protein interactions and protein-DNA binding are sufficient, in principle, to implement genetic circuits with the capabilities of a JK-latch. However, it also exposes fundamental limitations to its reliability, due to the fact that biological signal processing is asynchronous, in contrast to most digital electronics systems that feature a central clock to orchestrate the timing of all operations. We describe a seemingly natural way to improve the reliability by invoking the master-slave concept from digital electronics design. This concept could be useful to interpret the design of natural regulatory circuits, and for the design of synthetic biological systems. PMID:23874595

The concept of sustainable prefab modular housing made of natural fiber reinforced polymer (NFRP)

NASA Astrophysics Data System (ADS)

Setyowati, E.; Pandelaki, E. E.

2018-03-01

This research aims to formulate the concept of public housing based on research results on natural fiber reinforced polymer (FRP) material which has been done in the road map of research. Research output is the public housing design and specifications of FRP made of water hyacinths and coconut fiber. Method used is descriptive review of the concept based on references and material test which consists of density, water absorption, modulus of rupture (MOR), tensile strength, absorption coefficient and Sound Transmission Loss (STL). The entire tests of material were carried out in the laboratory of materials and construction, while the acoustic tests carried out using the impedance tubes method. The test results concluded that the FRP material may have a density between 0.2481 – 0.2777 g/cm3, the absorption coefficient is average of 0.450 – 0.900, the Modulus of Elasticity is between 4061 – 15193 kg/cm2, while the average of sound transmission loss is 52 – 59 dB. Furthermore, that the concept of public housing must be able to be the embryo of the concept of environment-friendly and low emissions housing.

Integration of nursing assessment concepts into the medical entities dictionary using the LOINC semantic structure as a terminology model.

PubMed

Cieslowski, B J; Wajngurt, D; Cimino, J J; Bakken, S

2001-01-01

Recent investigations have tested the applicability of various terminology models for the representing nursing concepts including those related to nursing diagnoses, nursing interventions, and standardized nursing assessments as a prerequisite for building a reference terminology that supports the nursing domain. We used the semantic structure of Clinical LOINC (Logical Observations, Identifiers, Names, and Codes) as a reference terminology model to support the integration of standardized assessment terms from two nursing terminologies into the Medical Entities Dictionary (MED), the concept-oriented, metadata dictionary at New York Presbyterian Hospital. Although the LOINC semantic structure was used previously to represent laboratory terms in the MED, selected hierarchies and semantic slots required revisions in order to incorporate the nursing assessment concepts. This project was an initial step in integrating nursing assessment concepts into the MED in a manner consistent with evolving standards for reference terminology models. Moreover, the revisions provide the foundation for adding other types of standardized assessments to the MED.

Integration of nursing assessment concepts into the medical entities dictionary using the LOINC semantic structure as a terminology model.

PubMed Central

Cieslowski, B. J.; Wajngurt, D.; Cimino, J. J.; Bakken, S.

2001-01-01

Recent investigations have tested the applicability of various terminology models for the representing nursing concepts including those related to nursing diagnoses, nursing interventions, and standardized nursing assessments as a prerequisite for building a reference terminology that supports the nursing domain. We used the semantic structure of Clinical LOINC (Logical Observations, Identifiers, Names, and Codes) as a reference terminology model to support the integration of standardized assessment terms from two nursing terminologies into the Medical Entities Dictionary (MED), the concept-oriented, metadata dictionary at New York Presbyterian Hospital. Although the LOINC semantic structure was used previously to represent laboratory terms in the MED, selected hierarchies and semantic slots required revisions in order to incorporate the nursing assessment concepts. This project was an initial step in integrating nursing assessment concepts into the MED in a manner consistent with evolving standards for reference terminology models. Moreover, the revisions provide the foundation for adding other types of standardized assessments to the MED. PMID:11825165

Solar satellites

NASA Astrophysics Data System (ADS)

Poher, C.

A reference system design, projected costs, and the functional concepts of a satellite solar power system (SSPS) for converting sunlight falling on solar panels of a satellite in GEO to a multi-GW beam which could be received by a rectenna on earth are outlined. Electricity transmission by microwaves has been demonstrated, and a reference design system for supplying 5 GW dc to earth was devised. The system will use either monocrystalline Si or concentrator GaAs solar cells for energy collection in GEO. Development is still needed to improve the lifespan of the cells. Currently, the cell performance degrades 50 percent in efficiency after 7-8 yr in space. Each SSPS satellite would weigh either 34,000 tons (Si) or 51,000 tons (GaAs), thereby requiring the fabrication of a heavy lift launch vehicle or a single-stage-to-orbit transport in order to minimize launch costs. Costs for the solar panels have been estimated at $500/kW using the GaAs technology, with transport costs for materials to GEO being $40/kg.

Application of automation and robotics to lunar surface human exploration operations

NASA Technical Reports Server (NTRS)

Woodcock, Gordon R.; Sherwood, Brent; Buddington, Patricia A.; Bares, Leona C.; Folsom, Rolfe; Mah, Robert; Lousma, Jack

1990-01-01

Major results of a study applying automation and robotics to lunar surface base buildup and operations concepts are reported. The study developed a reference base scenario with specific goals, equipment concepts, robot concepts, activity schedules and buildup manifests. It examined crew roles, contingency cases and system reliability, and proposed a set of technologies appropriate and necessary for effective lunar operations. This paper refers readers to four companion papers for quantitative details where appropriate.

Satellite power systems (SPS) concept definition study. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1980-01-01

System definition studies resulted in a further definition of the reference system using gallium arsenide solar arrays, analysis of alternative subsystem options for the reference concept, preliminary solid state microwave concept studies, and an environmental analysis of laser transmission systems. The special emphasis studies concentrated on satellite construction, satellite construction base definition, satellite construction base construction, and rectenna construction. Major emphasis in the transportation studies was put on definition of a two stage parallel burn, vertical takeoff/horizontal landing concept. The electric orbit transfer vehicle was defined in greater detail. Program definition included cost analyses and schedule definition.

The Evaluation of Relationship between Sexual Self-concept and Sexual Dysfunction in Individuals Undergoing Methadone Maintenance Treatment

PubMed Central

Rajabizadeh, Ghodratolah; Yazdanpanah, Fatemeh; Ramezani, Mohammad Arash

2017-01-01

Background The present study was conducted with the aim of designing a causal model for the evaluation of sexual dysfunctions based on the variables of methadone dosage and sexual self-concept among individuals undergoing methadone maintenance treatment (MMT). Methods The study population of the present study consisted of married men of 20 to 45 years of age with sexual ýrelations and undergoing MMT for a minimum of 8 weeks referring to all MMT clinics of Kerman, Iran, in ýý2015-2016. ýThe subjects were selected through multi-stage cluster sampling (n = 250). Data were collected using the General Health Questionnaire (GHQ-28), Multi-Dimensional Sexual Self-concept Questionnaire (MSSQ), and Internal Index for Erectile Function (IIEF). Data were analyzed using path analysis method and Pearson correlation coefficient. The suggested model was evaluated using structural equation model (SEM), and indirect relationships were assessed using Bootstrap method. Findings The suggested model showed acceptable fitness with the data, and all routes, except methadone use route, to sexual function were significant. The result of the multiple ýindirect route showed that sexual function had a significant relationship with methadone use through ýsexual self-concept. In total, 60% of variance in sexual dysfunction was explained using the variables of the suggested model. Conclusion Further studies are suggested to be conducted regarding psychological factors effective on the sexual dysfunctions among individuals undergoing MMT, such as sexual self-concept. Moreover, more detailed evaluation of each subscale of positive and negative sexual self-concept is recommended to assess the psychological causes of sexual dysfunctions in these individuals and design psychological, behavioral, and cognitive-behavioral treatment interventions for them. PMID:29299211

Overcoming Barriers to Implementation of Evidence-Based Practice Concepts in Athletic Training Education: Perceptions of Select Educators

PubMed Central

Manspeaker, Sarah; Van Lunen, Bonnie

2011-01-01

Context: The need to include evidence-based practice (EBP) concepts in entry-level athletic training education is evident as the profession transitions toward using evidence to inform clinical decision making. Objective: To evaluate athletic training educators' experience with implementation of EBP concepts in Commission on Accreditation of Athletic Training Education (CAATE)-accredited entry-level athletic training education programs in reference to educational barriers and strategies for overcoming these barriers. Design: Qualitative interviews of emergent design with grounded theory. Setting: Undergraduate CAATE-accredited athletic training education programs. Patients or Other Participants: Eleven educators (3 men, 8 women). The average number of years teaching was 14.73 ± 7.06. Data Collection and Analysis: Interviews were conducted to evaluate perceived barriers and strategies for overcoming these barriers to implementation of evidence-based concepts in the curriculum. Interviews were explored qualitatively through open and axial coding. Established themes and categories were triangulated and member checked to determine trustworthiness. Results: Educators identified 3 categories of need for EBP instruction: respect for the athletic training profession, use of EBP as part of the decision-making toolbox, and third-party reimbursement. Barriers to incorporating EBP concepts included time, role strain, knowledge, and the gap between clinical and educational practices. Suggested strategies for surmounting barriers included identifying a starting point for inclusion and approaching inclusion from a faculty perspective. Conclusions: Educators must transition toward instruction of EBP, regardless of barriers present in their academic programs, in order to maintain progress with other health professions' clinical practices and educational standards. Because today's students are tomorrow's clinicians, we need to include EBP concepts in entry-level education to promote critical thinking, inspire potential research interest, and further develop the available body of knowledge in our growing clinical practice. PMID:22488139

Assessment of the Technical Maturity of Generation IV Concepts for Test or Demonstration Reactor Applications, Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gougar, Hans David

2015-10-01

The United States Department of Energy (DOE) commissioned a study the suitability of different advanced reactor concepts to support materials irradiations (i.e. a test reactor) or to demonstrate an advanced power plant/fuel cycle concept (demonstration reactor). As part of the study, an assessment of the technical maturity of the individual concepts was undertaken to see which, if any, can support near-term deployment. A Working Group composed of the authors of this document performed the maturity assessment using the Technical Readiness Levels as defined in DOE’s Technology Readiness Guide . One representative design was selected for assessment from of each ofmore » the six Generation-IV reactor types: gas-cooled fast reactor (GFR), lead-cooled fast reactor (LFR), molten salt reactor (MSR), supercritical water-cooled reactor (SCWR), sodium-cooled fast reactor (SFR), and very high temperature reactor (VHTR). Background information was obtained from previous detailed evaluations such as the Generation-IV Roadmap but other technical references were also used including consultations with concept proponents and subject matter experts. Outside of Generation IV activity in which the US is a party, non-U.S. experience or data sources were generally not factored into the evaluations as one cannot assume that this data is easily available or of sufficient quality to be used for licensing a US facility. The Working Group established the scope of the assessment (which systems and subsystems needed to be considered), adapted a specific technology readiness scale, and scored each system through discussions designed to achieve internal consistency across concepts. In general, the Working Group sought to determine which of the reactor options have sufficient maturity to serve either the test or demonstration reactor missions.« less

The Evaluation of Relationship between Sexual Self-concept and Sexual Dysfunction in Individuals Undergoing Methadone Maintenance Treatment.

PubMed

Rajabizadeh, Ghodratolah; Yazdanpanah, Fatemeh; Ramezani, Mohammad Arash

2017-04-01

The present study was conducted with the aim of designing a causal model for the evaluation of sexual dysfunctions based on the variables of methadone dosage and sexual self-concept among individuals undergoing methadone maintenance treatment (MMT). The study population of the present study consisted of married men of 20 to 45 years of age with sexual ýrelations and undergoing MMT for a minimum of 8 weeks referring to all MMT clinics of Kerman, Iran, in ýý2015-2016. ýThe subjects were selected through multi-stage cluster sampling (n = 250). Data were collected using the General Health Questionnaire (GHQ-28), Multi-Dimensional Sexual Self-concept Questionnaire (MSSQ), and Internal Index for Erectile Function (IIEF). Data were analyzed using path analysis method and Pearson correlation coefficient. The suggested model was evaluated using structural equation model (SEM), and indirect relationships were assessed using Bootstrap method. The suggested model showed acceptable fitness with the data, and all routes, except methadone use route, to sexual function were significant. The result of the multiple ýindirect route showed that sexual function had a significant relationship with methadone use through ýsexual self-concept. In total, 60% of variance in sexual dysfunction was explained using the variables of the suggested model. Further studies are suggested to be conducted regarding psychological factors effective on the sexual dysfunctions among individuals undergoing MMT, such as sexual self-concept. Moreover, more detailed evaluation of each subscale of positive and negative sexual self-concept is recommended to assess the psychological causes of sexual dysfunctions in these individuals and design psychological, behavioral, and cognitive-behavioral treatment interventions for them.

Development of a 5 MW reference gearbox for offshore wind turbines: 5 MW reference gearbox

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nejad, Amir Rasekhi; Guo, Yi; Gao, Zhen

2015-07-27

This paper presents detailed descriptions, modeling parameters and technical data of a 5MW high-speed gearbox developed for the National Renewable Energy Laboratory offshore 5MW baseline wind turbine. The main aim of this paper is to support the concept studies and research for large offshore wind turbines by providing a baseline gearbox model with detailed modeling parameters. This baseline gearbox follows the most conventional design types of those used in wind turbines. It is based on the four-point supports: two main bearings and two torque arms. The gearbox consists of three stages: two planetary and one parallel stage gears. The gearmore » ratios among the stages are calculated in a way to obtain the minimum gearbox weight. The gearbox components are designed and selected based on the offshore wind turbine design codes and validated by comparison to the data available from large offshore wind turbine prototypes. All parameters required to establish the dynamic model of the gearbox are then provided. Moreover, a maintenance map indicating components with high to low probability of failure is shown. The 5 MW reference gearbox can be used as a baseline for research on wind turbine gearboxes and comparison studies. It can also be employed in global analysis tools to represent a more realistic model of a gearbox in a coupled analysis.« less

Design Quality in the Context of Healthcare Environments: A Scoping Review

PubMed Central

Anåker, Anna; Heylighen, Ann; Nordin, Susanna; Elf, Marie

2016-01-01

Objective: We explored the concept of design quality in relation to healthcare environments. In addition, we present a taxonomy that illustrates the wide range of terms used in connection with design quality in healthcare. Background: High-quality physical environments can promote health and well-being. Developments in healthcare technology and methodology put high demands on the design quality of care environments, coupled with increasing expectations and demands from patients and staff that care environments be person centered, welcoming, and accessible while also supporting privacy and security. In addition, there are demands that decisions about the design of healthcare architecture be based on the best available information from credible research and the evaluation of existing building projects. Method: The basic principles of Arksey and O’Malley’s model of scoping review design were used. Data were derived from literature searches in scientific databases. A total of 18 articles and books were found that referred to design quality in a healthcare context. Results: Design quality of physical healthcare environments involves three different themes: (i) environmental sustainability and ecological values, (ii) social and cultural interactions and values, and (iii) resilience of the engineering and building construction. Design quality was clarified herein with a definition. Conclusions: Awareness of what is considered design quality in relation to healthcare architecture could help to design healthcare environments based on evidence. To operationalize the concept, its definition must be clear and explicit and able to meet the complex needs of the stakeholders in a healthcare context, including patients, staff, and significant others. PMID:28643560

It's time to reinvent the general aviation airplane

NASA Technical Reports Server (NTRS)

Stengel, Robert F.

1988-01-01

Current designs for general aviation airplanes have become obsolete, and avenues for major redesign must be considered. New designs should incorporate recent advances in electronics, aerodynamics, structures, materials, and propulsion. Future airplanes should be optimized to operate satisfactorily in a positive air traffic control environment, to afford safety and comfort for point-to-point transportation, and to take advantage of automated manufacturing techniques and high production rates. These requirements have broad implications for airplane design and flying qualities, leading to a concept for the Modern Equipment General Aviation (MEGA) airplane. Synergistic improvements in design, production, and operation can provide a much needed fresh start for the general aviation industry and the traveling public. In this investigation a small four place airplane is taken as the reference, although the proposed philosophy applies across the entire spectrum of general aviation.

Satellite power system: Concept development and evaluation program, reference system report

NASA Technical Reports Server (NTRS)

1979-01-01

The Satellite Power System (SPS) Reference System is discussed and the technical and operational information required in support of environmental, socioeconomic, and comparative assessment studies are emphasized. The reference System concept features a gallium-aluminum-arsenide, and silicon solar cell options. Other aspects of an SPS are the construction of bases in space, launch and mission control bases on earth, and fleets of various transportation vehicles to support the construction and maintenance operations of the satellites.

MYCIN II: design and implementation of a therapy reference with complex content-based indexing.

PubMed Central

Kim, D. K.; Fagan, L. M.; Jones, K. T.; Berrios, D. C.; Yu, V. L.

1998-01-01

We describe the construction of MYCIN II, a prototype system that provides for content-based markup and search of a forthcoming clinical therapeutics textbook, Antimicrobial Therapy and Vaccines. Existing commercial search technology for digital references utilizes generic tools such as textword-based searches with geographical or statistical refinements. We suggest that the drawbacks of such systems significantly restrict their use in everyday clinical practice. This is in spite of the fact that there is a great need for the information contained within these same references. The system we describe is intended to supplement keyword searching so that certain important questions can be asked easily and can be answered reliably (in terms of precision and recall). Our method attacks this problem in a restricted domain of knowledge-clinical infectious disease. For example, we would like to be able to answer the class of questions exemplified by the following query: "What antimicrobial agents can be used to treat endocarditis caused by Eikenella corrodens?" We have compiled and analyzed a list of such questions to develop a concept-based markup scheme. This scheme was then applied within an HTML markup to electronically "highlight" passages from three textbook chapters. We constructed a functioning web-based search interface. Our system also provides semi-automated querying of PubMed using our concept markup and the user's actions as a guide. PMID:9929205

MYCIN II: design and implementation of a therapy reference with complex content-based indexing.

PubMed

Kim, D K; Fagan, L M; Jones, K T; Berrios, D C; Yu, V L

1998-01-01

We describe the construction of MYCIN II, a prototype system that provides for content-based markup and search of a forthcoming clinical therapeutics textbook, Antimicrobial Therapy and Vaccines. Existing commercial search technology for digital references utilizes generic tools such as textword-based searches with geographical or statistical refinements. We suggest that the drawbacks of such systems significantly restrict their use in everyday clinical practice. This is in spite of the fact that there is a great need for the information contained within these same references. The system we describe is intended to supplement keyword searching so that certain important questions can be asked easily and can be answered reliably (in terms of precision and recall). Our method attacks this problem in a restricted domain of knowledge-clinical infectious disease. For example, we would like to be able to answer the class of questions exemplified by the following query: "What antimicrobial agents can be used to treat endocarditis caused by Eikenella corrodens?" We have compiled and analyzed a list of such questions to develop a concept-based markup scheme. This scheme was then applied within an HTML markup to electronically "highlight" passages from three textbook chapters. We constructed a functioning web-based search interface. Our system also provides semi-automated querying of PubMed using our concept markup and the user's actions as a guide.

Integrated Baseline System (IBS), Version 1.03. User guide: Chemical Stockpile Emergency Preparedness Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bailey, B.M.; Burford, M.J.; Downing, T.R.

The Integrated Baseline System (IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planing and analysis. This document is the user guide for the IBS and explains how to operate the IBS system. The fundamental function of the IBS is to provide tools that civilian emergency management personnel can use in developing emergency plans and in supporting emergency management activities to cope with a chemical-releasing event at a military chemical stockpile. Emergency management planners can evaluate concepts and ideas using the IBS system. The results of that experience can then be factoredmore » into refining requirements and plans. This document provides information for the general system user, and is the primary reference for the system features of the IBS. It is designed for persons who are familiar with general emergency management concepts, operations, and vocabulary. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other LBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary. IBS is a dynamic system. Its capabilities are in a state of continuing expansion and enhancement.« less

Evolutionary space platform concept study. Volume 2, part B: Manned space platform concepts

NASA Technical Reports Server (NTRS)

1982-01-01

Logical, cost-effective steps in the evolution of manned space platforms are investigated and assessed. Tasks included the analysis of requirements for a manned space platform, identifying alternative concepts, performing system analysis and definition of the concepts, comparing the concepts and performing programmatic analysis for a reference concept.

When Practice Doesn't Make Perfect: Effects of Task Goals on Learning Computing Concepts

ERIC Educational Resources Information Center

Miller, Craig S.; Settle, Amber

2011-01-01

Specifying file references for hypertext links is an elementary competence that nevertheless draws upon core computational thinking concepts such as tree traversal and the distinction between relative and absolute references. In this article we explore the learning effects of different instructional strategies in the context of an introductory…

Reference in human and non-human primate communication: What does it take to refer?

PubMed

Sievers, Christine; Gruber, Thibaud

2016-07-01

The concept of functional reference has been used to isolate potentially referential vocal signals in animal communication. However, its relatedness to the phenomenon of reference in human language has recently been brought into question. While some researchers have suggested abandoning the concept of functional reference altogether, others advocate a revision of its definition to include contextual cues that play a role in signal production and perception. Empirical and theoretical work on functional reference has also put much emphasis on how the receiver understands the referential signal. However, reference, as defined in the linguistic literature, is an action of the producer, and therefore, any definition describing reference in non-human animals must also focus on the producer. To successfully determine whether a signal is used to refer, we suggest an approach from the field of pragmatics, taking a closer look at specific situations of signal production, specifically at the factors that influence the production of a signal by an individual. We define the concept of signaller's reference to identify intentional acts of reference produced by a signaller independently of the communicative modality, and illustrate it with a case study of the hoo vocalizations produced by wild chimpanzees during travel. This novel framework introduces an intentional approach to referentiality. It may therefore permit a closer comparison of human and non-human animal referential behaviour and underlying cognitive processes, allowing us to identify what may have emerged solely in the human lineage.

Ideograms for Physics and Chemistry

NASA Astrophysics Data System (ADS)

García Risueño, Pablo; Syropoulos, Apostolos; Vergés, Natàlia

2016-12-01

Ideograms (symbols that represent a word or idea) have great communicative value. They refer to concepts in a simple manner, easing the understanding of related ideas. Moreover, ideograms can simplify the often cumbersome notation used in the fields of Physics and physical Chemistry. Nonetheless only a few ideograms- like and - have been defined to date. In this work we propose that the scientific community follows the example of Mathematics—as well as that of oriental languages—and bestows a more important role upon ideograms. To support this thesis we propose ideograms for essential concepts in Physics and Chemistry. They are designed to be intuitive, and their goal is to make equations easier to read and understand. Our symbols are included in a publicly available [InlineEquation not available: see fulltext.]package ( svrsymbols).

Accurate positioning of long, flexible ARM's (Articulated Robotic Manipulator)

NASA Technical Reports Server (NTRS)

Malachowski, Michael J.

1988-01-01

An articulated robotic manipulator (ARM) system is being designed for space applications. Work being done on a concept utilizing an infinitely stiff laser beam for position reference is summarized. The laser beam is projected along the segments of the ARM, and the position is sensed by the beam rider modules (BRM) mounted on the distal ends of the segments. The BRM concept is the heart of the system. It utilizes a combination of lateral displacements and rotational and distance measurement sensors. These determine the relative position of the two ends of the segments with respect to each other in six degrees of freedom. The BRM measurement devices contain microprocessor controlled data acquisition and active positioning components. An indirect adaptive controller is used to accurately control the position of the ARM.

Optical analysis of a compound quasi-microscope for planetary landers

NASA Technical Reports Server (NTRS)

Wall, S. D.; Burcher, E. E.; Huck, F. O.

1974-01-01

A quasi-microscope concept, consisting of facsimile camera augmented with an auxiliary lens as a magnifier, was introduced and analyzed. The performance achievable with this concept was primarily limited by a trade-off between resolution and object field; this approach leads to a limiting resolution of 20 microns when used with the Viking lander camera (which has an angular resolution of 0.04 deg). An optical system is analyzed which includes a field lens between camera and auxiliary lens to overcome this limitation. It is found that this system, referred to as a compound quasi-microscope, can provide improved resolution (to about 2 microns ) and a larger object field. However, this improvement is at the expense of increased complexity, special camera design requirements, and tighter tolerances on the distances between optical components.

Accuracy of Different Implant Impression Techniques: Evaluation of New Tray Design Concept.

PubMed

Liu, David Yu; Cader, Fathima Nashmie; Abduo, Jaafar; Palamara, Joseph

2017-12-29

To evaluate implant impression accuracy with a new tray design concept in comparison to nonsplinted and splinted impression techniques for a 2-implant situation. A reference bar titanium framework was fabricated to fit on 2 parallel implants. The framework was used to generate a resin master model with 2 implants that fit precisely against the framework. Three impression techniques were evaluated: (1) nonsplinted, (2) splinted, and (3) nonsplinted with modified tray impressions. All the trays were fabricated from light-cured acrylic resin material with openings that corresponded to the implant impression copings. Ten impressions were taken for each technique using poly(vinyl siloxane) impression material. The impressions were poured with type IV dental stone to generate the test casts. A rosette strain gauge was bonded to the middle of the framework. As the framework retaining screws were tightened on each test cast, the developed strains were recorded until the completion of the tightening to 35 Ncm. The generated strains of the rosette strain gauge were used to calculate the maximum principal strain. A statistically significant difference was observed among the different impression techniques. The modified tray design impression technique was associated with the least framework strains, which indicates greater accuracy compared with the other techniques. There was no significant difference between the splinted and the nonsplinted impression techniques. The new tray design concept appeared to produce more accurate implant impressions than the other techniques. Despite the statistical difference among the impression techniques, the clinical significance of this difference is yet to be determined. © 2017 by the American College of Prosthodontists.

Supersonic Wing Optimization Using SpaRibs

NASA Technical Reports Server (NTRS)

Locatelli, David; Mulani, Sameer B.; Liu, Qiang; Tamijani, Ali Y.; Kapania, Rakesh K.

2014-01-01

This research investigates the advantages of using curvilinear spars and ribs, termed SpaRibs, to design a supersonic aircraft wing-box in comparison to the use of classic design concepts that employ straight spars and ribs. The objective is to achieve a more efficient load-bearing mechanism and to passively control the deformation of the structure under the flight loads. Moreover, the use of SpaRibs broadens the design space and allows for natural frequencies and natural mode shape tailoring. The SpaRibs concept is implemented in a new optimization MATLAB-based framework referred to as EBF3SSWingOpt. This optimization scheme performs both the sizing and the shaping of the internal structural elements, connecting the optimizer with the analysis software. The shape of the SpaRibs is parametrically defined using the so called Linked Shape method. Each set of SpaRibs is placed in a one by one square domain of the natural space. The set of curves is subsequently transformed in the physical space for creating the wing structure geometry layout. The shape of each curve of each set is unique; however, mathematical relations link the curvature in an effort to reduce the number of design variables. The internal structure of a High Speed Commercial Transport aircraft concept developed by Boeing is optimized subjected to stress, subsonic flutter and supersonic flutter constraints. The results show that the use of the SpaRibs allows for the reduction of the aircraft's primary structure weight without violating the constraints. A weight reduction of about 15 percent is observed.

A lightweight vibro-acoustic metamaterial demonstrator: Numerical and experimental investigation

NASA Astrophysics Data System (ADS)

Claeys, C.; Deckers, E.; Pluymers, B.; Desmet, W.

2016-03-01

In recent years metamaterials gained a lot of attention due to their superior noise and vibration insulation properties, be it at least in some targeted and tuneable frequency ranges, referred to as stopbands. These are frequency zones for which free wave propagation is prevented throughout the metamaterial, resulting in frequency zones of pronounced wave attenuation. Metamaterials are achieved due to addition of an, often periodic, grid of resonant structures to a host material or structure. The interaction between resonant inclusions and host structure can lead to a performance which is superior to the ones of any of the constituent materials. A key element in this concept is that waves can be affected by incorporating structural resonant elements of sub-wavelength sizes, i.e. features that are actually smaller than the wavelength of the waves to be affected. This paves the way towards compact and light vibro-acoustic solutions in the lower frequency ranges. This paper discusses the numerical design and experimental validation of acoustic insulation based on the concept of metamaterials: a hollow core periodic sandwich structure with added local resonant structures. In order to investigate the sensitivity to specific parameters in the metamaterial design and the robustness of the design, a set of variations on the nominal design are investigated. The stop bands are numerically predicted through unit cell modelling after which a full vibro-acoustic finite element model is applied to predict the insertion loss of the demonstrator. The results of these analyses are compared with measurements; both indicate that this metamaterials concept can be applied to combine light weight, compact volume and good acoustic behaviour.

Construction of a pulse-coupled dipole network capable of fear-like and relief-like responses

NASA Astrophysics Data System (ADS)

Lungsi Sharma, B.

2016-07-01

The challenge for neuroscience as an interdisciplinary programme is the integration of ideas among the disciplines to achieve a common goal. This paper deals with the problem of deriving a pulse-coupled neural network that is capable of demonstrating behavioural responses (fear-like and relief-like). Current pulse-coupled neural networks are designed mostly for engineering applications, particularly image processing. The discovered neural network was constructed using the method of minimal anatomies approach. The behavioural response of a level-coded activity-based model was used as a reference. Although the spiking-based model and the activity-based model are of different scales, the use of model-reference principle means that the characteristics that is referenced is its functional properties. It is demonstrated that this strategy of dissection and systematic construction is effective in the functional design of pulse-coupled neural network system with nonlinear signalling. The differential equations for the elastic weights in the reference model are replicated in the pulse-coupled network geometrically. The network reflects a possible solution to the problem of punishment and avoidance. The network developed in this work is a new network topology for pulse-coupled neural networks. Therefore, the model-reference principle is a powerful tool in connecting neuroscience disciplines. The continuity of concepts and phenomena is further maintained by systematic construction using methods like the method of minimal anatomies.

An Internet Protocol-Based Software System for Real-Time, Closed-Loop, Multi-Spacecraft Mission Simulation Applications

NASA Technical Reports Server (NTRS)

Davis, George; Cary, Everett; Higinbotham, John; Burns, Richard; Hogie, Keith; Hallahan, Francis

2003-01-01

The paper will provide an overview of the web-based distributed simulation software system developed for end-to-end, multi-spacecraft mission design, analysis, and test at the NASA Goddard Space Flight Center (GSFC). This software system was developed for an internal research and development (IR&D) activity at GSFC called the Distributed Space Systems (DSS) Distributed Synthesis Environment (DSE). The long-term goal of the DSS-DSE is to integrate existing GSFC stand-alone test beds, models, and simulation systems to create a "hands on", end-to-end simulation environment for mission design, trade studies and simulations. The short-term goal of the DSE was therefore to develop the system architecture, and then to prototype the core software simulation capability based on a distributed computing approach, with demonstrations of some key capabilities by the end of Fiscal Year 2002 (FY02). To achieve the DSS-DSE IR&D objective, the team adopted a reference model and mission upon which FY02 capabilities were developed. The software was prototyped according to the reference model, and demonstrations were conducted for the reference mission to validate interfaces, concepts, etc. The reference model, illustrated in Fig. 1, included both space and ground elements, with functional capabilities such as spacecraft dynamics and control, science data collection, space-to-space and space-to-ground communications, mission operations, science operations, and data processing, archival and distribution addressed.

A Distributed Simulation Software System for Multi-Spacecraft Missions

NASA Technical Reports Server (NTRS)

Burns, Richard; Davis, George; Cary, Everett

2003-01-01

The paper will provide an overview of the web-based distributed simulation software system developed for end-to-end, multi-spacecraft mission design, analysis, and test at the NASA Goddard Space Flight Center (GSFC). This software system was developed for an internal research and development (IR&D) activity at GSFC called the Distributed Space Systems (DSS) Distributed Synthesis Environment (DSE). The long-term goal of the DSS-DSE is to integrate existing GSFC stand-alone test beds, models, and simulation systems to create a "hands on", end-to-end simulation environment for mission design, trade studies and simulations. The short-term goal of the DSE was therefore to develop the system architecture, and then to prototype the core software simulation capability based on a distributed computing approach, with demonstrations of some key capabilities by the end of Fiscal Year 2002 (FY02). To achieve the DSS-DSE IR&D objective, the team adopted a reference model and mission upon which FY02 capabilities were developed. The software was prototyped according to the reference model, and demonstrations were conducted for the reference mission to validate interfaces, concepts, etc. The reference model, illustrated in Fig. 1, included both space and ground elements, with functional capabilities such as spacecraft dynamics and control, science data collection, space-to-space and space-to-ground communications, mission operations, science operations, and data processing, archival and distribution addressed.

Eddy-Current Reference Standard

NASA Technical Reports Server (NTRS)

Ambrose, H. H., Jr.

1985-01-01

Magnetic properties of metallic reference standards duplicated and stabilized for eddy-current coil measurements over long times. Concept uses precisely machined notched samples of known annealed materials as reference standards.

Cost and performance of thermal storage concepts in solar thermal systems, Phase 2-liquid metal receivers

NASA Astrophysics Data System (ADS)

McKenzie, A. W.

Cost and performance of various thermal storage concepts in a liquid metal receiver solar thermal power system application have been evaluated. The objectives of this study are to provide consistently calculated cost and performance data for thermal storage concepts integrated into solar thermal systems. Five alternative storage concepts are evaluated for a 100-MW(e) liquid metal-cooled receiver solar thermal power system for 1, 6, and 15 hours of storage: sodium 2-tank (reference system), molten draw salt 2-tank, sand moving bed, air/rock, and latent heat (phase change) with tube-intensive heat exchange (HX). The results indicate that the all sodium 2-tank thermal storage concept is not cost-effective for storage in excess of 3 or 4 hours; the molten draw salt 2-tank storage concept provides significant cost savings over the reference sodium 2-tank concept; and the air/rock storage concept with pressurized sodium buffer tanks provides the lowest evaluated cost of all storage concepts considered above 6 hours of storage.

Intervention studies to foster resilience - A systematic review and proposal for a resilience framework in future intervention studies.

PubMed

Chmitorz, A; Kunzler, A; Helmreich, I; Tüscher, O; Kalisch, R; Kubiak, T; Wessa, M; Lieb, K

2018-02-01

Psychological resilience refers to the phenomenon that many people are able to adapt to the challenges of life and maintain mental health despite exposure to adversity. This has stimulated research on training programs to foster psychological resilience. We evaluated concepts, methods and designs of 43 randomized controlled trials published between 1979 and 2014 which assessed the efficacy of such training programs and propose standards for future intervention research based on recent developments in the field. We found that concepts, methods and designs in current resilience intervention studies are of limited use to properly assess efficacy of interventions to foster resilience. Major problems are the use of definitions of resilience as trait or a composite of resilience factors, the use of unsuited assessment instruments, and inappropriate study designs. To overcome these challenges, we propose 1) an outcome-oriented definition of resilience, 2) an outcome-oriented assessment of resilience as change in mental health in relation to stressor load, and 3) methodological standards for suitable study designs of future intervention studies. Our proposals may contribute to an improved quality of resilience intervention studies and may stimulate further progress in this growing research field. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

A Comparison Study: Assessing Teachers' Conceptions with the Chemistry Concepts Inventory

ERIC Educational Resources Information Center

Kruse, Rebecca A.; Roehrig, Gillian H.

2005-01-01

The conceptions of chemistry teachers with diverse backgrounds within a large urban district are assessed. The Chemistry Concepts Inventory (CCI) and Mulford and Robinson's research study were utilized for reference and conceptual factors contributing to teachers' conceptions such as degree major and credential status were analyzed from data…

Concepts in Activities and Discourses

ERIC Educational Resources Information Center

Greeno, James G.

2012-01-01

The articles in this special issue make valuable contributions toward a scientific understanding of concepts that is broader than the traditional view that has focused on categorizing by individuals. I propose considering concepts for categorization as a special case of concepts. At their clearest, they can be referred to as "formal concepts," or…

Linear fixed-field multipass arcs for recirculating linear accelerators

DOE PAGES

Morozov, V. S.; Bogacz, S. A.; Roblin, Y. R.; ...

2012-06-14

Recirculating Linear Accelerators (RLA's) provide a compact and efficient way of accelerating particle beams to medium and high energies by reusing the same linac for multiple passes. In the conventional scheme, after each pass, the different energy beams coming out of the linac are separated and directed into appropriate arcs for recirculation, with each pass requiring a separate fixed-energy arc. In this paper we present a concept of an RLA return arc based on linear combined-function magnets, in which two and potentially more consecutive passes with very different energies are transported through the same string of magnets. By adjusting themore » dipole and quadrupole components of the constituting linear combined-function magnets, the arc is designed to be achromatic and to have zero initial and final reference orbit offsets for all transported beam energies. We demonstrate the concept by developing a design for a droplet-shaped return arc for a dog-bone RLA capable of transporting two beam passes with momenta different by a factor of two. Finally, we present the results of tracking simulations of the two passes and lay out the path to end-to-end design and simulation of a complete dog-bone RLA.« less

Geometrical model for DBMS: an experimental DBMS using IBM solid modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ali, D.E.D.L.

1985-01-01

This research presents a new model for data base management systems (DBMS). The new model, Geometrical DBMS, is based on using solid modelling technology in designing and implementing DBMS. The Geometrical DBMS is implemented using the IBM solid modelling Geometric Design Processor (GDP). Built basically on computer-graphics concepts, Geometrical DBMS is indeed a unique model. Traditionally, researchers start with one of the existent DBMS models and then put a graphical front end on it. In Geometrical DBMS, the graphical aspect of the model is not an alien concept tailored to the model but is, as a matter of fact, themore » atom around which the model is designed. The main idea in Geometrical DBMS is to allow the user and the system to refer to and manipulate data items as a solid object in 3D space, and representing a record as a group of logically related solid objects. In Geometical DBMS, hierarchical structure is used to present the data relations and the user sees the data as a group of arrays; yet, for the user and the system together, the data structure is a multidimensional tree.« less

Building Integrated Design Practice under the Concept of Sustainable Development

NASA Astrophysics Data System (ADS)

Liu, Xuexin

2018-03-01

With the continuous development of social economy, people are more demanding for architecture. Some advanced design concepts are gradually applied to the design of buildings. Under the concept of sustainable development, building integration design has also been widely used to promote the rapid development of architectural design. Integrated design concepts and sustainable development concepts play an important role to meet people’s requirements. This article will explore the concept of sustainable development under the concept of integrated architectural design and practice analysis, propose appropriate measures.

Soft computing in design and manufacturing of advanced materials

NASA Technical Reports Server (NTRS)

Cios, Krzysztof J.; Baaklini, George Y; Vary, Alex

1993-01-01

The potential of fuzzy sets and neural networks, often referred to as soft computing, for aiding in all aspects of manufacturing of advanced materials like ceramics is addressed. In design and manufacturing of advanced materials, it is desirable to find which of the many processing variables contribute most to the desired properties of the material. There is also interest in real time quality control of parameters that govern material properties during processing stages. The concepts of fuzzy sets and neural networks are briefly introduced and it is shown how they can be used in the design and manufacturing processes. These two computational methods are alternatives to other methods such as the Taguchi method. The two methods are demonstrated by using data collected at NASA Lewis Research Center. Future research directions are also discussed.

Conceptual design studies and experiments related to cavity exhaust systems for nuclear light bulb configurations

NASA Technical Reports Server (NTRS)

Kendall, J. S.; Stoeffler, R. C.

1972-01-01

Investigations of various phases of gaseous nuclear rocket technology have been conducted. The principal research efforts have recently been directed toward the closed-cycle, vortex-stabilized nuclear light bulb engine and toward a small-scale fissioning uranium plasma experiment that could be conducted in the Los Alamos Scientific Laboratory's Nuclear Furnace. The engine concept is based on the transfer of energy by thermal radiation from gaseous fissioning uranium, through a transparent wall, to hydrogen propellant. The reference engine configuration is comprised of seven unit cavities, each having its own fuel transparent wall and propellant duct. The basic design of the engine is described. Subsequent studies performed to supplement and investigate the basic design are reported. Summaries of other nuclear light bulb research programs are included.

Developmental engineering: a new paradigm for the design and manufacturing of cell-based products. Part II: from genes to networks: tissue engineering from the viewpoint of systems biology and network science.

PubMed

Lenas, Petros; Moos, Malcolm; Luyten, Frank P

2009-12-01

The field of tissue engineering is moving toward a new concept of "in vitro biomimetics of in vivo tissue development." In Part I of this series, we proposed a theoretical framework integrating the concepts of developmental biology with those of process design to provide the rules for the design of biomimetic processes. We named this methodology "developmental engineering" to emphasize that it is not the tissue but the process of in vitro tissue development that has to be engineered. To formulate the process design rules in a rigorous way that will allow a computational design, we should refer to mathematical methods to model the biological process taking place in vitro. Tissue functions cannot be attributed to individual molecules but rather to complex interactions between the numerous components of a cell and interactions between cells in a tissue that form a network. For tissue engineering to advance to the level of a technologically driven discipline amenable to well-established principles of process engineering, a scientifically rigorous formulation is needed of the general design rules so that the behavior of networks of genes, proteins, or cells that govern the unfolding of developmental processes could be related to the design parameters. Now that sufficient experimental data exist to construct plausible mathematical models of many biological control circuits, explicit hypotheses can be evaluated using computational approaches to facilitate process design. Recent progress in systems biology has shown that the empirical concepts of developmental biology that we used in Part I to extract the rules of biomimetic process design can be expressed in rigorous mathematical terms. This allows the accurate characterization of manufacturing processes in tissue engineering as well as the properties of the artificial tissues themselves. In addition, network science has recently shown that the behavior of biological networks strongly depends on their topology and has developed the necessary concepts and methods to describe it, allowing therefore a deeper understanding of the behavior of networks during biomimetic processes. These advances thus open the door to a transition for tissue engineering from a substantially empirical endeavor to a technology-based discipline comparable to other branches of engineering.

Low-speed wind-tunnel test of a STOL supersonic-cruise fighter concept

NASA Technical Reports Server (NTRS)

Coe, Paul L., Jr.; Riley, Donald R.

1988-01-01

A wind-tunnel investigation was conducted to examine the low-speed static stability and control characteristics of a 0.10 scale model of a STOL supersonic cruise fighter concept. The concept, referred to as a twin boom fighter, was designed as a STOL aircraft capable of efficient long range supersonic cruise. The configuration name is derived from the long twin booms extending aft of the engine to the twin vertical tails which support a high center horizontal tail. The propulsion system features a two dimensional thrust vectoring exhaust nozzle which is located so that the nozzle hinge line is near the aircraft center of gravity. This arrangement is intended to allow large thrust vector angles to be used to obtain significant values of powered lift, while minimizing pitching moment trim changes. Low speed stability and control information was obtained over an angle of attack range including the stall. A study of jet induced power effects was included.

MOSES: a modular sensor electronics system for space science and commercial applications

NASA Astrophysics Data System (ADS)

Michaelis, Harald; Behnke, Thomas; Tschentscher, Matthias; Mottola, Stefano; Neukum, Gerhard

1999-10-01

The camera group of the DLR--Institute of Space Sensor Technology and Planetary Exploration is developing imaging instruments for scientific and space applications. One example is the ROLIS imaging system of the ESA scientific space mission `Rosetta', which consists of a descent/downlooking and a close-up imager. Both are parts of the Rosetta-Lander payload and will operate in the extreme environment of a cometary nucleus. The Rosetta Lander Imaging System (ROLIS) will introduce a new concept for the sensor electronics, which is referred to as MOSES (Modula Sensor Electronics System). MOSES is a 3D miniaturized CCD- sensor-electronics which is based on single modules. Each of the modules has some flexibility and enables a simple adaptation to specific application requirements. MOSES is mainly designed for space applications where high performance and high reliability are required. This concept, however, can also be used in other science or commercial applications. This paper describes the concept of MOSES, its characteristics, performance and applications.

Reliability of SNOMED-CT Coding by Three Physicians using Two Terminology Browsers

PubMed Central

Chiang, Michael F.; Hwang, John C.; Yu, Alexander C.; Casper, Daniel S.; Cimino, James J.; Starren, Justin

2006-01-01

SNOMED-CT has been promoted as a reference terminology for electronic health record (EHR) systems. Many important EHR functions are based on the assumption that medical concepts will be coded consistently by different users. This study is designed to measure agreement among three physicians using two SNOMED-CT terminology browsers to encode 242 concepts from five ophthalmology case presentations in a publicly-available clinical journal. Inter-coder reliability, based on exact coding match by each physician, was 44% using one browser and 53% using the other. Intra-coder reliability testing revealed that a different SNOMED-CT code was obtained up to 55% of the time when the two browsers were used by one user to encode the same concept. These results suggest that the reliability of SNOMED-CT coding is imperfect, and may be a function of browsing methodology. A combination of physician training, terminology refinement, and browser improvement may help increase the reproducibility of SNOMED-CT coding. PMID:17238317

An Enhanced Engineering Perspective of Global Climate Systems and Statistical Formulation of Terrestrial CO2 Exchanges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dai, Yuanshun; Baek, Seung H.; Garcia-Diza, Alberto

2012-01-01

This paper designs a comprehensive approach based on the engineering machine/system concept, to model, analyze, and assess the level of CO2 exchange between the atmosphere and terrestrial ecosystems, which is an important factor in understanding changes in global climate. The focus of this article is on spatial patterns and on the correlation between levels of CO2 fluxes and a variety of influencing factors in eco-environments. The engineering/machine concept used is a system protocol that includes the sequential activities of design, test, observe, and model. This concept is applied to explicitly include various influencing factors and interactions associated with CO2 fluxes.more » To formulate effective models of a large and complex climate system, this article introduces a modeling technique that will be referred to as Stochastic Filtering Analysis of Variance (SFANOVA). The CO2 flux data observed from some sites of AmeriFlux are used to illustrate and validate the analysis, prediction and globalization capabilities of the proposed engineering approach and the SF-ANOVA technology. The SF-ANOVA modeling approach was compared to stepwise regression, ridge regression, and neural networks. The comparison indicated that the proposed approach is a valid and effective tool with similar accuracy and less complexity than the other procedures.« less

Implementation green and low cost on landscape design of Manggarai Integrated Station, Jakarta

NASA Astrophysics Data System (ADS)

Suryanti, T.; Meilianti, H.

2018-01-01

The Manggarai Integrated Station is the transit of various transportation modes. The Integrated Station located in Manggarai Jakarta and managed by PT. KAI. The Manggarai station is integrated and have terminal nature of transit areas (switching mode of transportation). There are several problems in the site, such as the problem of the site conditions in the urban area, topography, soil, vegetation, space, visual, users on the site can provide ideas for the concepts. The data was analyzed using the quantitative descriptive methode. The purpose of this research is to design the integrated station atmosphere, not only can support of the activities station users, but can also accommodate the needs of the community. It will “Green, Low cost” at the Manggarai integrated transport transit station in Jakarta. The potential that exists in this area is the lowliest integrated from various areas of the mode of transportation that make the users to facilitate transit transportation to the other. The basic concept of this design refers to the “Green, Low Cost” which unite with theme “user friendly” land use on a more efficient and effective site. The result of this research is landscape design development of Manggarai integrated station. Its consists of landscape design in west and east area, transition area, parking area, solar panel area, and social interaction area.

How do Small Groups Promote Behaviour Change? An Integrative Conceptual Review of Explanatory Mechanisms.

PubMed

Borek, Aleksandra J; Abraham, Charles

2018-03-01

Small groups are used to promote health, well-being, and personal change by altering members' perceptions, beliefs, expectations, and behaviour patterns. An extensive cross-disciplinary literature has articulated and tested theories explaining how such groups develop, function, and facilitate change. Yet these theoretical understandings are rarely applied in the development, description, and evaluation of health-promotion, group-based, behaviour-change interventions. Medline database, library catalogues, search engines, specific journals and reference lists were searched for relevant texts. Texts were reviewed for explanatory concepts or theories describing change processes in groups, which were integrated into the developing conceptual structure. This was designed to be a parsimonious conceptual framework that could be applied to design and delivery. Five categories of interacting processes and concepts were identified and defined: (1) group development processes, (2) dynamic group processes, (3) social change processes, (4) personal change processes, and (5) group design and operating parameters. Each of these categories encompasses a variety of theorised mechanisms explaining individual change in small groups. The final conceptual model, together with the design issues and practical recommendations derived from it, provides a practical basis for linking research and theory explaining group functioning to optimal design of group-based, behaviour-change interventions. © 2018 The Authors. Applied Psychology: Health and Well-Being published by John Wiley & Sons Ltd on behalf of International Association of Applied Psychology.

Toward Right-Fidelity Rotorcraft Conceptual Design

NASA Technical Reports Server (NTRS)

Sinsay, Jeffrey D.; Johnson, Wayne

2010-01-01

The aviation Advanced Design Office (ADO) of the US Army Aeroflightdynamics Directorate (AMRDEC) performs conceptual design of advanced Vertical Takeoff and Landing (VTOL) concepts in support of the Army's development and acquisition of new aviation systems. In particular, ADO engages in system synthesis to assess the impact of new technologies and their application to satisfy emerging warfighter needs and requirements. Fundamental to ADO being successful in accomplishing its role; is the ability to evaluate a wide array of proposed air vehicle concepts, and independently synthesize new concepts to inform Army and DoD decision makers about the tradespace in which decisions will be made (Figure 1). ADO utilizes a conceptual design (CD) process in the execution of its role. Benefiting from colocation with NASA rotorcraft researchers at the Ames Research Center, ADO and NASA have engaged in a survey of the current rotorcraft PD practices and begun the process of improving those capabilities to enable effective design and development of the next generation of VTOL systems. A unique aspect of CD in ADO is the fact that actual designs developed in-house are not intended to move forward in the development process. Rather, they are used as reference points in discussions about requirements development and technology impact. The ultimate products of ADO CD efforts are technology impact assessments and specifications which guide industry design activity. The fact that both the requirement and design are variables in the tradespace adds to the complexity of the CD process. A frequent need is ability to assess the relative "cost" of variations in requirement for a diverse set of VTOL configurations. Each of these configurations may have fundamentally different response characteristics to this requirement variation, and such insight into how different requirements drive different designs is a critical insight ADO attempts to provide decision makers. The processes and tools utilized are driven by the timeline in which questions must be answered. This can range from quick "back-of-the-envelope" assessments of a configuration made in an afternoon, to more detailed tradespace explorations that can take upwards of a year to complete. A variety of spreadsheet based tools and conceptual design codes are currently in use. The in-house developed conceptual sizing code RC (Rotorcraft) has been the preferred tool of choice for CD activity for a number of years. Figure 2 illustrates the long standing coupling between RC and solid modeling tools for layout, as well as a number of ad-hoc interfaces with external analyses. RC contains a sizing routine that is built around the use of momentum theory for rotors, classic finite wing theory, a referred parameter engine model, and semi-emperical weight estimation techniques. These methods lend themselves to rapid solutions, measured in seconds and minutes. The successful use of RC, however requires careful consideration of model input parameters and judicious comparison with existing aircraft to avoid unjustified extrapolation of results. RC is in fact a legacy of a series of codes whose development started in the early 1970s, and is best suited to the study of conventional helicopters and XV-15 style tiltrotors. Other concepts have been analyzed with RC, but typically it became necessary to modify the source code and methods for each unique configuration. Recent activity has lead to the development of a new code, NASA Design and Analysis of Rotorcraft (NDARC). NDARC uses a similar level of analytical fidelity as RC, but is built on a new framework intended to improve modularity and ability to rapidly model a wider array of concepts. Critical to achieving this capability is the decomposition of the aircraft system into a series of fundamental components which can then be assembled to form a wide-array of configurations. The paper will provide an overview of NDARC and its capabilities.

Science teacher’s idea about environmental concepts in science learning as the first step of science teacher training

NASA Astrophysics Data System (ADS)

Tapilouw, M. C.; Firman, H.; Redjeki, S.; Chandra, D. T.

2018-05-01

To refresh natural environmental concepts in science, science teacher have to attend a teacher training. In teacher training, all participant can have a good sharing and discussion with other science teacher. This study is the first step of science teacher training program held by education foundation in Bandung and attended by 20 science teacher from 18 Junior High School. The major aim of this study is gathering science teacher’s idea of environmental concepts. The core of questions used in this study are basic competencies linked with environmental concepts, environmental concepts that difficult to explain, the action to overcome difficulties and references in teaching environmental concepts. There are four major findings in this study. First finding, most environmental concepts are taught in 7th grade. Second finding, most difficult environmental concepts are found in 7th grade. Third finding, there are five actions to overcome difficulties. Fourth finding, science teacher use at least four references in mastering environmental concepts. After all, teacher training can be a solution to reduce difficulties in teaching environmental concepts.

Current Highlights on ESA's Planetary Technology Reference Studies

NASA Astrophysics Data System (ADS)

Falkner, P.

The concept of Technology Reference Studies has been introduced already at EGU05, where the Venus Entry Probe (VEP), the Jupiter Minisat Explorer (JME), the Deimos Sample Return (DSR) and the Interstellar Heliopause Probe (IHP) have been presented in detail. At the EGU06 the new studies in reaction to the Cosmic Vision exercise have been introduced. The formulation of themes and mapping into potential future missions has been taken as basis in the planning of additional new and adaptation of existing TRS's to cover areas, which have not yet been addressed by any TRS. These new ongoing studies are progressing well and current highlights will be presented in the paper in further detail as well as an overview on supporting technology studies and Concurrent Design Facility (CDF) sessions. The Jupiter System Explorer (JSE) study investigates mission concepts with up to two Magnetospheric Orbiters placed in a highly elliptical Jovian orbit and the possibility to deploy a Jovian Entry Probe. The mission profile is based on a solar powered concept launched on a Soyuz-Fregat launcher. Mission analysis and the application of a new Jovian radiation model are supporting the study activities. The Near-Earth Asteroid Sample Return (NEA-SR) concept explores the possibilities of sample return or in-situ mission profiles with visits to up to two NEA targets. Due to the assumed low cost cap a trade between a sample return and remote/in-situ exploration concept has a high attention in the study. The Cross Scale TRS (CS-TRS) is intended to simultaneously investigate magnetospheric and plasma processes in three spatial scales with a formation flight of up to 12 spacecraft, orbiting on deep elliptical orbits around Earth. One of the major challenges is the launch of that number of spacecraft on a single launcher and the collisionless deployment of the formation at the target orbit. The scope if the GeoSail TRS is to demonstrate deployment, attitude control and navigation concepts for a solar sailing mission as required by Interstellar Heliopause Probe (IHP) or Solar Polar Orbiter (SPO) mission concepts and to investigate the potential influence of the extended sail for science measurements.

New approaches to digital transformation of petrochemical production

NASA Astrophysics Data System (ADS)

Andieva, E. Y.; Kapelyuhovskaya, A. A.

2017-08-01

The newest concepts of the reference architecture of digital industrial transformation are considered, the problems of their application for the enterprises having in their life cycle oil products processing and marketing are revealed. The concept of the reference architecture, providing a systematic representation of the fundamental changes in the approaches to production management based on the automation of production process control is proposed.

Lessons learned from the design of chemical space networks and opportunities for new applications.

PubMed

Vogt, Martin; Stumpfe, Dagmar; Maggiora, Gerald M; Bajorath, Jürgen

2016-03-01

The concept of chemical space is of fundamental relevance in chemical informatics and computer-aided drug discovery. In a series of articles published in the Journal of Computer-Aided Molecular Design, principles of chemical space design were evaluated, molecular networks proposed as an alternative to conventional coordinate-based chemical reference spaces, and different types of chemical space networks (CSNs) constructed and analyzed. Central to the generation of CSNs was the way in which molecular similarity relationships were assessed and a primary focal point was the network-based representation of biologically relevant chemical space. The design and comparison of CSNs based upon alternative similarity measures can be viewed as an evolutionary path with interesting lessons learned along the way. CSN design has matured to the point that such chemical space representations can be used in practice. In this contribution, highlights from the sequence of CSN design efforts are discussed in context, providing a perspective for future practical applications.

Lessons learned from the design of chemical space networks and opportunities for new applications

NASA Astrophysics Data System (ADS)

Vogt, Martin; Stumpfe, Dagmar; Maggiora, Gerald M.; Bajorath, Jürgen

2016-03-01

The concept of chemical space is of fundamental relevance in chemical informatics and computer-aided drug discovery. In a series of articles published in the Journal of Computer- Aided Molecular Design, principles of chemical space design were evaluated, molecular networks proposed as an alternative to conventional coordinate-based chemical reference spaces, and different types of chemical space networks (CSNs) constructed and analyzed. Central to the generation of CSNs was the way in which molecular similarity relationships were assessed and a primary focal point was the network-based representation of biologically relevant chemical space. The design and comparison of CSNs based upon alternative similarity measures can be viewed as an evolutionary path with interesting lessons learned along the way. CSN design has matured to the point that such chemical space representations can be used in practice. In this contribution, highlights from the sequence of CSN design efforts are discussed in context, providing a perspective for future practical applications.

Feasibility analysis on integration of luminous environment measuring and design based on exposure curve calibration

NASA Astrophysics Data System (ADS)

Zou, Yuan; Shen, Tianxing

2013-03-01

Besides illumination calculating during architecture and luminous environment design, to provide more varieties of photometric data, the paper presents combining relation between luminous environment design and SM light environment measuring system, which contains a set of experiment devices including light information collecting and processing modules, and can offer us various types of photometric data. During the research process, we introduced a simulation method for calibration, which mainly includes rebuilding experiment scenes in 3ds Max Design, calibrating this computer aid design software in simulated environment under conditions of various typical light sources, and fitting the exposure curves of rendered images. As analytical research went on, the operation sequence and points for attention during the simulated calibration were concluded, connections between Mental Ray renderer and SM light environment measuring system were established as well. From the paper, valuable reference conception for coordination between luminous environment design and SM light environment measuring system was pointed out.

User’s Guide for Crew Chief: A Computer Graphics Simulation of an Aircraft Maintenance Technician (Version 1 - CD 20)

DTIC Science & Technology

1988-05-25

theoretical approaches used in developing the proqrams. The introduction of the report (Section 1) gives general background of the concepts and... GENERATION 1-5 1.3 WORKPLACE DESIGN 1-6 1.4 THE CREW CHIEF MAINTENANCE ANALYSIS PROGRAMS 1-7 1.5 GETTING STARTED 1-11 2 CREW CHIEF GENERATION FUNCTIONS...OPTIONS 8-1 9 QUICK REFERENCE 9-1 9.1 CREW CHIEF GENERATION FUNCTIONS (@CCGEN) 9-1 9.1.1 CREW CHIEF Initialization Function (CCINIT) 9-1 9.1.2 CREW CHIEF

The organization of successful participative management in a health sciences library.

PubMed Central

Wood, M B

1977-01-01

The University of Washington Health Sciences Library, Seattle, and its participative management process are described in detail. The evolution of the management system is reviewed by interrelating the various phases of the library's growth, its service complexities, and its communication needs. Staff development results of this participative management mode are discussed. Reference is made to the use of group dynamics concepts. The current organizational design, which integrates the participative subunit with the simple line management structure, is considered effective by both the library staff and its director. PMID:843648

NASA, the first 25 years: 1958 - 1983

NASA Technical Reports Server (NTRS)

Dalelio, J. (Compiler); Tully, J. (Compiler); Cortesi, W. (Compiler)

1983-01-01

Because it is impossible to describe the 25 years of NASA's research and missions in detail, this book is designed to provide a reference base from which teachers can develop classroom concepts and activities. It begins with a prologue, a brief history of the National Advisory Committee for Aeronautics, NASA's predecessor. Succeeding chapters are devoted to major NASA programs, in alphabetical order; within the chapters projects are listed chronologically. Each chapter concludes with ideas for the classroom and space for notes and new information the user may wish to add.

Inferential revision in narrative texts: An ERP study.

PubMed

Pérez, Ana; Cain, Kate; Castellanos, María C; Bajo, Teresa

2015-11-01

We evaluated the process of inferential revision during text comprehension in adults. Participants with high or low working memory read short texts, in which the introduction supported two plausible concepts (e.g., 'guitar/violin'), although one was more probable ('guitar'). There were three possible continuations: a neutral sentence, which did not refer back to either concept; a no-revise sentence, which referred to a general property consistent with either concept (e.g., '…beautiful curved body'); and a revise sentence, which referred to a property that was consistent with only the less likely concept (e.g., '…matching bow'). Readers took longer to read the sentence in the revise condition, indicating that they were able to evaluate their comprehension and detect a mismatch. In a final sentence, a target noun referred to the alternative concept supported in the revise condition (e.g., 'violin'). ERPs indicated that both working memory groups were able to evaluate their comprehension of the text (P3a), but only high working memory readers were able to revise their initial incorrect interpretation (P3b) and integrate the new information (N400) when reading the revise sentence. Low working memory readers had difficulties inhibiting the no-longer-relevant interpretation and thus failed to revise their situation model, and they experienced problems integrating semantically related information into an accurate memory representation.

Children's Conceptions of Air Pressure: Exploring the Nature of Conceptual Change.

ERIC Educational Resources Information Center

Tytler, Russell

1998-01-01

Constructs case studies of individuals to explore the way conceptions change over time, and the difficulties presented by the concept of atmospheric pressure. Evaluates different structural theories of conceptual change. Contains 62 references. (DDR)

Psychoneurometric Operationalization of Threat Sensitivity: Relations with Clinical Symptom and Physiological Response Criteria

PubMed Central

Yancey, James R.; Venables, Noah C.; Patrick, Christopher J.

2015-01-01

The NIMH RDoC initiative calls for the incorporation of neurobiological approaches and findings into conceptions of mental health problems through a focus on biobehavioral constructs investigated across multiple domains of measurement (units of analysis). Though the constructs in the RDoC system are characterized in ‘process terms’ (i.e., as functional concepts with brain and behavioral referents), these constructs can also be framed as dispositions (i.e., as dimensions of variation in biobehavioral functioning across individuals). Focusing on one key RDoC construct, acute threat or ‘fear’, the current paper illustrates a construct-oriented psychoneurometric strategy to operationalizing this construct in individual-difference terms—as threat sensitivity (THT+). Utilizing data from 454 adult participants, we demonstrate empirically that: 1) a scale measure of THT+ design to tap general fear/fearlessness predicts effectively to relevant clinical problems (i.e., fear disorder symptoms), 2) this scale measure shows reliable associations with physiological indices of acute reactivity to aversive visual stimuli, and 3) a cross-domain factor reflecting the intersection of scale and physiological indicators of THT+ predicts effectively to both clinical and neurophysiological criterion measures. Results illustrate how the psychoneurometric approach can be used to create a dimensional index of a biobehavioral trait construct, in this case THT+, which can serve as a bridge between phenomena in domains of psychopathology and neurobiology. Implications and future directions are discussed with reference to the RDoC initiative and existing report-based conceptions of psycholological traits. PMID:26877132

Bio-behavioral synchrony promotes the development of conceptualized emotions.

PubMed

Atzil, Shir; Gendron, Maria

2017-10-01

As adults, we have structured conceptual representations of our emotions that help us to make sense of and regulate our ongoing affective experience. The ability to use emotion concepts is critical to make predictions about the world and choose appropriate action, such as 'I am afraid, and going to run away' or 'I am hungry and going to eat'. Thus, emotion concepts have an important role in helping us maintain our ongoing physiological balance, or allostasis. We will suggest here that infants can learn emotion concepts for the purpose of allostasis regulation, and that conceptualization is key component in emotional development. Moreover, we will suggest that social dyads facilitate concept learning because of a robust evolutionary feature seen in newborns of social species: they cannot survive alone and depend on conspecifics for allostasis regulation. Such social dependency creates a robust driving force for social learning of emotion concepts, and makes the social dyad, which is designed to regulate the infant's allostasis, an optimal medium for concept learning. In line with that, we will review evidence showing that the neural reference space for emotion overlaps with neural circuits that support allostasis (striatum, amygdala, and hypothalamus) and conceptualization (medial prefrontal cortex, posterior cingulate cortex), and that their developmental trajectories are interrelated, and depend on synchronous social care. Copyright © 2017 Elsevier Ltd. All rights reserved.

High School Biology: A Group Approach to Concept Mapping.

ERIC Educational Resources Information Center

Brown, David S.

2003-01-01

Explains concept mapping as an instructional method in cooperative learning environments, and describes a study investigating the effectiveness of concept mapping on student learning during a photosynthesis and cellular respiration unit. Reports on the positive effects of concept mapping in the experimental group. (Contains 16 references.) (YDS)

Satellite power system concept development and evaluation program. Volume 1: Technical assessment summary report

NASA Technical Reports Server (NTRS)

1980-01-01

Candidate satellite power system (SPS) concepts were identified and evaluated in terms of technical and cost factors. A number of alternative technically feasible approaches and system concepts were investigated. A reference system was defined to facilitate economic, environmental, and societal assessments by the Department of Energy. All elements of the reference system were defined including the satellite and all its subsystems, the orbital construction and maintenance bases, all elements of the space transportation system, the ground receiving station, and the associated industrial facilities for manufacturing the required hardware. The reference conclusions and remaining issues are stated for the following topical areas: system definition; energy conversion and power management; power transmission and reception; structures, controls, and materials; construction and operations; and space transportation.

Color associations among designers and non-designers for common warning and operation concepts.

PubMed

Ng, Annie W Y; Chan, Alan H S

2018-07-01

This study examined color-concept associations among designers and non-designers with commonly used warning and operation concepts. This study required 199 designers and 175 non-designers to indicate their choice among nine colors to associate with each of the 38 concepts in a color-concept table. The results showed that the designers and non-designers had the same color associations and similar strengths of stereotypes for 17 concepts. The strongest color-concept stereotypes for both groups were red-danger, red-fire, and red-hot. However, the designers and non-designers had different color associations for the concepts of escape (green, red), increase (green, red), potential hazard (red, orange), fatal (black, red), and normal (white, green), while the strengths of the 16 remaining associations for both groups were not at equivalent levels. These findings provide ergonomists and design practitioners with a better understanding of population stereotypes for color coding, and consequently to effectively use colors in their user-centered designs. Copyright © 2018 Elsevier Ltd. All rights reserved.

Managed Development Environment Successes for MSFC's VIPA Team

NASA Technical Reports Server (NTRS)

Finckenor, Jeff; Corder, Gary; Owens, James; Meehan, Jim; Tidwell, Paul H.

2005-01-01

This paper outlines the best practices of the Vehicle Design Team for VIPA. The functions of the VIPA Vehicle Design (VVD) discipline team are to maintain the controlled reference geometry and provide linked, simplified geometry for each of the other discipline analyses. The core of the VVD work, and the approach for VVD s first task of controlling the reference geometry, involves systems engineering, top-down, layout-based CAD modeling within a Product Data Manager (PDM) development environment. The top- down approach allows for simple control of very large, integrated assemblies and greatly enhances the ability to generate trade configurations and reuse data. The second VVD task, model simplification for analysis, is handled within the managed environment through application of the master model concept. In this approach, there is a single controlling, or master, product definition dataset. Connected to this master model are reference datasets with live geometric and expression links. The referenced models can be for drawings, manufacturing, visualization, embedded analysis, or analysis simplification. A discussion of web based interaction, including visualization, between the design and other disciplines is included. Demonstrated examples are cited, including the Space Launch Initiative development cycle, the Saturn V systems integration and verification cycle, an Orbital Space Plane study, and NASA Exploration Office studies of Shuttle derived and clean sheet launch vehicles. The VIPA Team has brought an immense amount of detailed data to bear on program issues. A central piece of that success has been the Managed Development Environment and the VVD Team approach to modeling.

Stratospheric Observatory For Infrared Astronomy (SOFIA). Phase A: System concept description

NASA Technical Reports Server (NTRS)

1995-01-01

Infrared astronomers have made significant discoveries using the NASA/Ames Research Center C-141 Kuiper airborne Observatory (KAO) with its 0.91-meter telescope. The need for a 3-meter class airborne observatory has been established to improve astronomy data gathering capability. The new system envisioned by NASA and the international community of astronomers will be known as the Stratospheric Observatory for Infrared Astronomy (SOFIA). The platform of choice for SOFIA is a modified Boeing 747SP. SOFIA is viewed as a logical progression from the KAO. Potentially, a 3-meter telescope operating at the altitude achievable by the 747SP aircraft can be 11 times more sensitive than the KAO, can have 3.3 times better angular resolution, and will allow observations of compact sources in a volume of space up to 36 times that of the KAO. The KAO has enabled detection of about 15 percent of the far infrared IRAS survey point-sources; SOFIA should be able to detect them all. This document presents the results of in-house ARC and contracted concept definition studies for SOFIA. Using the ARC-based Kuiper Airborne Observatory as a basis for both SOFIA design and operations concepts, the SOFIA system concept has been developed with a view toward demonstrating mission and technical feasibility, and preparing preliminary cost estimates. The reference concept developed is not intended to represent final design, and should be treated accordingly. The most important products of this study, other than demonstration of system feasibility, are the understanding of system trade-offs and the development of confidence in the technology base that exists to move forward with a program leading to implementation of the Stratospheric Observatory for Infrared Astronomy (SOFIA).

Knowledge Management and Reference Services

ERIC Educational Resources Information Center

Gandhi, Smiti

2004-01-01

Many corporations are embracing knowledge management (KM) to capture the intellectual capital of their employees. This article focuses on KM applications for reference work in libraries. It defines key concepts of KM, establishes a need for KM for reference services, and reviews various KM initiatives for reference services.

Conceptual design for a food production, water and waste processing, and gas regeneration module

NASA Technical Reports Server (NTRS)

Nicks, O. W.

1986-01-01

During the first six month period, the RECON (Regenerative Concepts Group) team collected reference material, made visits to consult with other researchers, and invited distinguished visitors to speak on the status of closed life support activities. A decision was made to develop the data base and modeling such that artificial intelligence (AI) methods could be used to manipulate data and examine concept alternatives. Six discrete tasks and a project schedule were outlined for the first year. The first two tasks have been essentially completed and have resulted in a sample set of assumptions for general use in defining candidate systems and for the specification of closed system characteristics. To model a closed environment, decisions were necessary to establish the amounts of food, air, water and waste products. Although recognized that data would eventually be normalized on the basis of a single human, the amount of data in existence for four person crews led to the decision to use this as a baseline. Information on existing concepts was collected from NASA sources, from industry, and libraries. Concept modeling was begun, hardware and software obtained, technical tasks identified and experimental work initiated.

An Investigation of Secondary Students' Mental Models of Climate Change and the Greenhouse Effect

NASA Astrophysics Data System (ADS)

Varela, Begoña; Sesto, Vanessa; García-Rodeja, Isabel

2018-03-01

There are several studies dealing with students' conceptions on climate change, but most of them refer to understanding before instruction. In contrast, this study investigates students' conceptions and describes the levels of sophistication of their mental models on climate change and the greenhouse effect. The participants were 40 secondary students (grade 7) in Spain. As a method of data collection, a questionnaire was designed with open-ended questions focusing on the mechanism, causes, and actions that could be useful in reducing climate change. Students completed the same questionnaire before and after instruction. The students' conceptions and mental models were identified by an inductive and iterative analysis of the participants' explanations. With regard to the students' conceptions, the results show that they usually link climate change to an increase in temperature, and they tend to mention, even after instruction, generic actions to mitigate climate change, such as not polluting. With regard to the students' mental models, the results show an evolution of models with little consistency and coherence, such as the models on level 1, towards higher levels of sophistication. The paper concludes with educational implications proposed for solving learning difficulties regarding the greenhouse effect and climate change.

Development of an Experiment High Performance Nozzle Research Program

NASA Technical Reports Server (NTRS)

2004-01-01

As proposed in the above OAI/NASA Glenn Research Center (GRC) Co-Operative Agreement the objective of the work was to provide consultation and assistance to the NASA GRC GTX Rocket Based Combined Cycle (RBCC) Program Team in planning and developing requirements, scale model concepts, and plans for an experimental nozzle research program. The GTX was one of the launch vehicle concepts being studied as a possible future replacement for the aging NASA Space Shuttle, and was one RBCC element in the ongoing NASA Access to Space R&D Program (Reference 1). The ultimate program objective was the development of an appropriate experimental research program to evaluate and validate proposed nozzle concepts, and thereby result in the optimization of a high performance nozzle for the GTX launch vehicle. Included in this task were the identification of appropriate existing test facilities, development of requirements for new non-existent test rigs and fixtures, develop scale nozzle model concepts, and propose corresponding test plans. Also included were the evaluation of originally proposed and alternate nozzle designs (in-house and contractor), evaluation of Computational Fluid Dynamics (CFD) study results, and make recommendations for geometric changes to result in improved nozzle thrust coefficient performance (Cfg).

G STL: the geostatistical template library in C++

NASA Astrophysics Data System (ADS)

Remy, Nicolas; Shtuka, Arben; Levy, Bruno; Caers, Jef

2002-10-01

The development of geostatistics has been mostly accomplished by application-oriented engineers in the past 20 years. The focus on concrete applications gave birth to many algorithms and computer programs designed to address different issues, such as estimating or simulating a variable while possibly accounting for secondary information such as seismic data, or integrating geological and geometrical data. At the core of any geostatistical data integration methodology is a well-designed algorithm. Yet, despite their obvious differences, all these algorithms share many commonalities on which to build a geostatistics programming library, lest the resulting library is poorly reusable and difficult to expand. Building on this observation, we design a comprehensive, yet flexible and easily reusable library of geostatistics algorithms in C++. The recent advent of the generic programming paradigm allows us elegantly to express the commonalities of the geostatistical algorithms into computer code. Generic programming, also referred to as "programming with concepts", provides a high level of abstraction without loss of efficiency. This last point is a major gain over object-oriented programming which often trades efficiency for abstraction. It is not enough for a numerical library to be reusable, it also has to be fast. Because generic programming is "programming with concepts", the essential step in the library design is the careful identification and thorough definition of these concepts shared by most geostatistical algorithms. Building on these definitions, a generic and expandable code can be developed. To show the advantages of such a generic library, we use G STL to build two sequential simulation programs working on two different types of grids—a surface with faults and an unstructured grid—without requiring any change to the G STL code.

Liquid rocket actuators and operators. [in spacecraft control systems

NASA Technical Reports Server (NTRS)

1973-01-01

All the types of actuators and associated operators used in booster, upper stage, and spacecraft propulsion and reaction-control systems except for chemical-explosive actuators and turbine actuators are discussed. Discussion of static and dynamic seals, mechanical transmission of motion, and instrumentation is included to the extent that actuator or operator design is affected. Selection of the optimum actuator configuration is discussed for specific application which require a tradeoff study that considers all the relevant factors: available energy sources, load capacity, stroke, speed of response, leakage limitations, environmental conditions, chemical compatibility, storage life and conditions, size, weight, and cost. These factors are interrelated with overall control-system design evaluations that are beyond the scope of this monograph; however, literature references are cited for a detailed review of the general considerations. Perinent advanced-state-of-the-art design concepts are surveyed briefly.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wissemann, Chris; White, Stanley M

The primary objective of the project was to develop a innovative Gravity Base Foundation (GBF) concepts, including fabrication yards, launching systems and installation equipment, for a 500MW utility scale project in the Great Lakes (Lake Erie). The goal was to lower the LCOE by 25%. The project was the first to investigate an offshore wind project in the Great Lakes and it has furthered the body of knowledge for foundations and installation methods within Lake Erie. The project collected historical geotechnical information for Lake Erie and also used recently obtained data from the LEEDCo Icebreaker Project (FOA DE-EE0005989) geotechnical programmore » to develop the conceptual designs. Using these data-sets, the project developed design wind and wave conditions from actual buoy data in order to develop a concept that would de-risk a project using a GBF. These wind and wave conditions were then utilized to create reference designs for various foundations specific to installation in Lake Erie. A project partner on the project (Weeks Marine) provided input for construction and costing the GBF fabrication and installation. By having a marine contractor with experience with large marine projects as part of the team provides credibility to the LCOE developed by NREL. NREL then utilized the design and construction costing information as part of the LCOE model. The report summarizes the findings of the project; Developed a cost model and “baseline” LCOE; Documented Site Conditions within Lake Erie; Developed Fabrication, Installation and Foundations Innovative Concept Designs; Evaluated LCOE Impact of Innovations; Developed Assembly line “Rail System” for GBF Construction and Staging; Developed Transit-Inspired Foundation Designs which incorporated: Semi-Floating Transit with Supplemental Pontoons Barge mounted Winch System; Developed GBF with “Penetration Skirt”; Developed Integrated GBF with Turbine Tower; Developed Turbine, Plant Layout and O&M Strategies. The report details lowering LCOE by 22.3% and identified additional strategies that could further lower LCOE when building an utility scale wind farm in the Great Lakes.« less

The Internal/External Frame of Reference Model of Self-Concept and Achievement Relations: Age-Cohort and Cross-Cultural Differences

ERIC Educational Resources Information Center

Marsh, Herbert W.; Abduljabbar, Adel Salah; Parker, Philip D.; Morin, Alexandre J. S.; Abdelfattah, Faisal; Nagengast, Benjamin; Möller, Jens; Abu-Hilal, Maher M.

2015-01-01

The internal/external frame of reference (I/E) model and dimensional comparison theory posit paradoxical relations between achievement (ACH) and self-concept (SC) in mathematics (M) and verbal (V) domains; ACH in each domain positively affects SC in the matching domain (e.g., MACH to MSC) but negatively in the nonmatching domain (e.g., MACH to…

THE CONCEPT OF PSYCHOTHERAPY IN AYURVEDA WITH SPECIAL REFERENCE TO SATVAVAJAYA

PubMed Central

Murthy, A. R. V.; Singh, R. H.

1987-01-01

Ayurveda conceives in Life (Ayu) as a four dimensional entity i.e. Sarirendriya Satvatma Samyoga. Accordingly it adopts a comprehensive psychosomatic-spiritual approach to preservation of health and cure of diseases. Satvavajaya (psychotherapy) is described as a major non-pharmacological approach to treatment. This paper presents a critical study on the concept of Psychotherapy in Ayurveda with special reference to Satvavajaya. PMID:22557578

Solar power satellite system definition study. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1979-01-01

Configuration concepts, option sizes, and systems definitions study design evolutions are reviewed. The main features of the present reference design silicon solar cell solar power satellite are described, as well as the provisions for space construction and support systems. The principal study accomplishments and conclusions are summarized according to the following tasks: (1) baseline critique; (2) construction and maintenance; (3) industrial complex needs, cost estimates, and production capacity; (4) launch complex requirements at KSC or at an offshore facility; (5) integration of the SPS/ground power network; (6) technology advancement and development; (7) costs and schedules; and (8) exploratory technology: laser annealing of solar cells degraded by proton irradiation, and a fiber-optic phase distribution link at 980 MHz.

Flexbus — an attractive technical solution for small missions

NASA Astrophysics Data System (ADS)

Settelmeyer, Eckard; Lampen, Martin; Hartmann, Ralf; Lippner, Gerhard

1996-11-01

Responding to the demand for a 'faster, cheaper, better' implementation of space related services, Domier Satellitensysteme GmbH has established and exercised an approach for the development and production of satellites and the corresponding ground equipment for small missions, referred to as Flexbus. It allows to support space service customers starting from mission engineering via design, development and manufacturing of the necessary hardware, the launch service and ending with the hand-over of the operational system. Flexbus harmonises a modular component concept with a sound design and development approach, as a whole providing the means to offer high quality products in a fairly short time and for competitive pricing. This paper will outline the major features of the Flexbus approach and describe application examples.

Elexbus — An attractive technical solution for small mission opportunities

NASA Astrophysics Data System (ADS)

Seltelmeyer, Eckard; Lampen, Martin; Hartmann, Ralf; Lippncr, Gerhard

Responding to the demand for a 'faster, cheaper, better' implementation of space related services. Dornier Satellitensysteme GmbH has established and exercised an approach for the development and production of satellites and the corresponding ground equipment for small missions, referred to as Flexbus. It allows to support space service customers starting from mission engineering via design, development and manufacturing of the necessary hardware, the launch service and ending with the hand-over of the operational system. Flexbus harmonises a modular component concept with a sound design and development approach, as a whole providing the means to offer high quality products in a fairly short time and for competitive pricing. This paper will outline the major features of the Flexbus approach and describe application examples.

Manned geosynchronous mission requirements and systems analysis study extension. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1981-01-01

A study was performed to determine the types of manned missions that will likely be performed in the late 1980's or early 1990's timeframe, to define MOTV configurations which satisfy these missions requirements, and to develop a program plan for its development. Twenty generic missions were originally defined for MOTV but, to simplify the selection process, five of these missions were selected as typical and used as Design Reference Missions. Systems and subsystems requirements were re-examined and sensitivity analyses performed to determine optimum point designs. Turnaround modes were considered to determine the most effective combination of ground based and spaced based activities. A preferred concept for the crew capsule and for the mission mode was developed.

Lunar Ultraviolet Telescope Experiment (LUTE), phase A

NASA Technical Reports Server (NTRS)

Mcbrayer, Robert O.

1994-01-01

The Lunar Ultraviolet Telescope Experiment (LUTE) is a 1-meter telescope for imaging from the lunar surface the ultraviolet spectrum between 1,000 and 3,500 angstroms. There have been several endorsements of the scientific value of a LUTE. In addition to the scientific value of LUTE, its educational value and the information it can provide on the design of operating hardware for long-term exposure in the lunar environment are important considerations. This report provides the results of the LUTE phase A activity begun at the George C. Marshall Space Flight Center in early 1992. It describes the objective of LUTE (science, engineering, and education), a feasible reference design concept that has evolved, and the subsystem trades that were accomplished during the phase A.

Combination of an electrolytic pretreatment unit with secondary water reclamation processes

NASA Technical Reports Server (NTRS)

Wells, G. W.; Bonura, M. S.

1973-01-01

The design and fabrication of a flight concept prototype electrolytic pretreatment unit (EPU) and of a contractor-furnished air evaporation unit (AEU) are described. The integrated EPU and AEU potable water recovery system is referred to as the Electrovap and is capable of processing the urine and flush water of a six-man crew. Results of a five-day performance verification test of the Electrovap system are presented and plans are included for the extended testing of the Electrovap to produce data applicable to the combination of electrolytic pretreatment with most final potable water recovery systems. Plans are also presented for a program to define the design requirements for combining the electrolytic pretreatment unit with a reverse osmosis final processing unit.

Professional Education, Know-How and Conceptual Ability: The Role of Education in the Attainment of Concept Mastery in Professional Work

ERIC Educational Resources Information Center

Winch, Christopher

2016-01-01

This article shows the relationship between know-how and conceptual ability with particular reference to professional education. It is argued that although concept mastery is necessary to expert performance, it is not sufficient. Starting with Geach's account of concepts, distinctions are made between concept acquisition and concept mastery. An…

Design and testing of piezo motors for non-magnetic and/or fine positioning applications

NASA Astrophysics Data System (ADS)

Six, M. F.; Le Letty, R.; Seiler, R.; Coste, P.

2005-07-01

Piezoelectric motors offer several outstanding characteristics that may be very interesting for new scientific instruments in space applications. Piezo motors use a combination of electro-mechanical and frictional forces for generating a progressive motion; they are well suited for positioning applications because they exhibit a large force at rest without any power supply, and they often do not require any reduction gear. They are increasingly used in optical applications. Using piezo motors in space applications may become more and more relevant because of the continuous trend towards adaptive optics in future scientific payloads. In general, piezoelectric actuators are more and more used in space. Piezoelectric motors exhibit a number of advantages compared to conventional electromagnetic (stepping) motors, e.g. superior force/mass ratio, improved direct drive capability, no power supply to maintain a position, feasibility of a fully non-magnetic motor design. In this context, two complementary concepts have been designed and evaluated in the frame of ESA funded research and development activities: a resonant concept, called Rotary Piezo Actuator (RPA), a quasi-static concept, called Rotary Piezo Motor for High Precision Pointing (RPMHPP). The developed Rotary Piezo Actuator (RPA) is based on a Ultrasonic Piezo Drive (UPD) unit that drives a friction ring on the rotor part supported by a ball bearing assembly. This new motorization principle offers excellent motion dynamics and positioning accuracy combined with a high un-powered torque at standstill, and it does not rely on any magnetic features. A rotary piezo motor compliant with the requirements of a reference space application has been designed and tested. The technology remains challenging to be mastered, since the interdisciplinary aspects of the concept include, among others, drive electronics and controller design, piezo-electricity, contact mechanics and tribology. The conceptual design has lead to a cup configuration, in which the stator is placed in the inner diameter of a duplex ball bearing assembly. Despite the mass penalty of the rotor suspension, this configuration has been preferred for an easier wear debris confinement and higher support stiffness. Development testing examined two routes for the friction material (that should exhibit a low wear rate and a high friction coefficient, which should be similar in air and in vacuum): a polymer solution, already known and tested by CEDRAT TECHNOLOGIES, and a ceramic solution. Some potential applications have been identified both in the space sector (for instance magnetometer motorisation for the SWARM mission) and in other sectors, such as motorisation of equipment for Magnetic Resonant Imaging, taking benefit from the non-magnetic design option of the RPA. The second concept (RPMHPP) aims at providing very high pointing accuracy for future instruments such as the one foreseen for telescope pointing in the LISA constellation. In this concept, the piezo actuators operate in quasi-static mode and lead to a robust design, able to withstand a large non-operational temperature range (-140 to +140°C). Although the concept could allow for a full rotation, the prototype was implemented with an elastic guiding of the shaft: the angular stroke is +/-1° and the measured angular positioning accuray is in the range of 100 nrad.

Vehicle Integrated Performance Analysis, the VIPA Experience: Reconnecting with Technical Integration

NASA Technical Reports Server (NTRS)

McGhee, David S.

2005-01-01

Today's NASA is facing significant challenges and changes. The Exploration initiative indicates a large increase in projects with limited increase in budget. The Columbia report has criticized NASA for its lack of insight and technical integration impacting its ability to provide safety. The Aldridge report is advocating NASA find new ways of doing business. Very early in the Space Launch Initiative (SLI) program a small team of engineers at MSFC were asked to propose a process for performing a system level assessment of a launch vehicle. The request was aimed primarily at providing insight and making NASA a "smart buyer." Out of this effort the VIPA team was created. The difference between the VIPA effort and many integration attempts is that VIPA focuses on using experienced people from various disciplines and a process which focuses them on a technically integrated assessment. Most previous attempts have focused on developing an all encompassing software tool. In addition, VIPA anchored its process formulation in the experience of its members and in early developmental Space Shuttle experience. The primary reference for this is NASA-TP-2001-210092, "Launch Vehicle Design Process: Characterization, Technical Integration, and Lessons Learned," and discussions with its authors. The foundations of VIPA's process are described. The VIPA team also recognized the need to drive detailed analysis earlier in the design process. Analyses and techniques typically done in later design phases, are brought forward using improved computing technology. The intent is to allow the identification of significant sensitivities, trades, and design issues much earlier in the program. This process is driven by the T-model for Technical Integration described in the aforementioned reference. VIPA's approach to performing system level technical integration is discussed in detail. Proposed definitions are offered to clarify this discussion and the general systems integration dialog. VIPA's capabilities and process can now be used to significantly enhance the development and monitoring of realizable project requirements. This is done through the use of VIPA's V-model. Starting with a given concept, VIPA's assessment validates the concept's stated performance, identifies significant issues either with the concept or the requirements, and then re-integrates these issues to determine impacts. This process is discussed along with a description of how it may be integrated into a program's insight and review process. The VIPA process has been employed successfully on several projects including SLI, Orbital Space Plane (OSP), and several heavy lift concepts for Exploration. It has also been proposed for use on the Jupiter Icy Moon (JIMO) spacecraft. The VIPA process has gained favor with both engineering and project organizations for being responsive and insightful. Selected results from these assessments will be presented.

High precision moving magnet chopper for variable operation conditions

NASA Technical Reports Server (NTRS)

Aicher, Winfried; Schmid, Manfred

1994-01-01

In the context of an ESTEC technology contract, a Chopping Mechanism was developed and built with the Far Infrared and Submillimeter Telescope (FIRST) astronomy mission as a reference. The task of the mechanism is to tilt the subreflector of the telescope with an assumed mass of 2.5 kg about one chopping axis at nominal frequencies of up to 5 Hz and chopping angles of up to +/- 11.25 mrad with high efficiency (minimum time for position change). The chopping axis is required to run through the subreflector vertex. After performing a concept trade-off also considering the low operational temperatures in the 130 K range, a design using moving magnet actuators was found to be the favorite one. In addition, a bearing concept using flexible pivots was chosen to meet the high chopping accuracy required. With this approach, a very reliable design could be realized, since the actuators work without any mechanical contact between its moving and fixed parts, and the only bearings used are two flexible pivots supporting the subreflector mounting interface. The mechanism was completely built in titanium in a lightweight and stiff design. The moving magnet actuators were designed to meet the stringent requirements for minimum risetime (time necessary to move from one angular position to a new one) in the 20 msec range. The angular position and the corresponding chopping frequency as well can be arbitrarily selected by the user.

Early-Years Teachers' Concept Images and Concept Definitions: Triangles, Circles, and Cylinders

ERIC Educational Resources Information Center

Tsamir, Pessia; Tirosh, Dina; Levenson, Esther; Barkai, Ruthi; Tabach, Michal

2015-01-01

This study investigates practicing early-years teachers' concept images and concept definitions for triangles, circles, and cylinders. Teachers were requested to define each figure and then to identify various examples and non-examples of the figure. Teachers' use of correct and precise mathematical language and reference to critical and…

Development of the Self-Concept in Childhood.

ERIC Educational Resources Information Center

McNelly, Frederick W., Jr.

This paper presents a review of the research related to the development of self concept in both "normal" and "abnormal" children. The problems and limitations of self concept research are discussed, followed by an analysis of self concept as related to: (1) the developmental factors in childhood (with specific references to the work of S.…

Computer-Based Tutoring of Visual Concepts: From Novice to Experts.

ERIC Educational Resources Information Center

Sharples, Mike

1991-01-01

Description of ways in which computers might be used to teach visual concepts discusses hypermedia systems; describes computer-generated tutorials; explains the use of computers to create learning aids such as concept maps, feature spaces, and structural models; and gives examples of visual concept teaching in medical education. (10 references)…

Electronegativity from Avogadro to Pauling. Part I: Origins of the Electronegativity Concept.

ERIC Educational Resources Information Center

Jensen, William B.

1996-01-01

Discusses the origins of electronegativity as a qualitative concept in the period between 1809 and 1813. Outlines the contributions of Amedeo Avogadro and Jons Jakob Berzelius to the development of this concept. Contains 53 references. (JRH)

Analysis of space systems study for the space disposal of nuclear waste study report. Volume 2: Technical report

NASA Technical Reports Server (NTRS)

1981-01-01

Reasonable space systems concepts were systematically identified and defined and a total system was evaluated for the space disposal of nuclear wastes. Areas studied include space destinations, space transportation options, launch site options payload protection approaches, and payload rescue techniques. Systems level cost and performance trades defined four alternative space systems which deliver payloads to the selected 0.85 AU heliocentric orbit destination at least as economically as the reference system without requiring removal of the protective radiation shield container. No concepts significantly less costly than the reference concept were identified.

Using Dedal to share and reuse distributed engineering design information

NASA Technical Reports Server (NTRS)

Baya, Vinod; Baudin, Catherine; Mabogunje, Ade; Das, Aseem; Cannon, David M.; Leifer, Larry J.

1994-01-01

The overall goal of the project is to facilitate the reuse of previous design experience for the maintenance, repair and redesign of artifacts in the electromechanical engineering domain. An engineering team creates information in the form of meeting summaries, project memos, progress reports, engineering notes, spreadsheet calculations and CAD drawings. Design information captured in these media is difficult to reuse because the way design concepts are referred to evolve over the life of a project and because decisions, requirements and structure are interrelated but rarely explicitly linked. Based on protocol analysis of the information seeking behavior of designer's, we defined a language to describe the content and the form of design records and implemented this language in Dedal, a tool for indexing, modeling and retrieving design information. We first describe the approach to indexing and retrieval in Dedal. Next we describe ongoing work in extending Dedal's capabilities to a distributed environment by integrating it with World Wide Web. This will enable members of a design team who are not co-located to share and reuse information.

Frames of Reference in the Classroom

ERIC Educational Resources Information Center

Grossman, Joshua

2012-01-01

The classic film "Frames of Reference" effectively illustrates concepts involved with inertial and non-inertial reference frames. In it, Donald G. Ivey and Patterson Hume use the cameras perspective to allow the viewer to see motion in reference frames translating with a constant velocity, translating while accelerating, and rotating--all with…

Understanding and Applying the Concept of Value Creation in Radiology.

PubMed

Larson, David B; Durand, Daniel J; Siegal, Daniel S

2017-04-01

The concept of value in radiology has been strongly advocated in recent years as a means of advancing patient care and decreasing waste. This article explores the concept of value creation in radiology and offers a framework for how radiology practices can create value according to the needs of their referring clinicians. Value only exists in the eyes of a customer. We propose that the primary purpose of diagnostic radiology is to answer clinical questions using medical imaging to help guide management of patient care. Because they are the direct recipient of this service, we propose that referring clinicians are the direct customers of a radiology practice and patients are indirect customers. Radiology practices create value as they understand and fulfill their referring clinicians' needs. To narrow those needs to actionable categories, we propose a framework consisting of four major dimensions: (1) how quickly the clinical question needs to be answered, (2) the degree of specialization required to answer the question, (3) how often the referring clinician uses imaging, and (4) the breadth of imaging that the referring clinician uses. We further identify three major settings in which referring clinicians utilize radiological services: (1) emergent or urgent care, (2) primary care, and (3) specialty care. Practices best meet these needs as they engage with their referring clinicians, create a shared vision, work together as a cohesive team, structure the organization to meet referring clinicians' needs, build the tools, and continually improve in ways that help referring clinicians care for patients. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Integrating MPI and deduplication engines: a software architecture roadmap.

PubMed

Baksi, Dibyendu

2009-03-01

The objective of this paper is to clarify the major concepts related to architecture and design of patient identity management software systems so that an implementor looking to solve a specific integration problem in the context of a Master Patient Index (MPI) and a deduplication engine can address the relevant issues. The ideas presented are illustrated in the context of a reference use case from Integrating the Health Enterprise Patient Identifier Cross-referencing (IHE PIX) profile. Sound software engineering principles using the latest design paradigm of model driven architecture (MDA) are applied to define different views of the architecture. The main contribution of the paper is a clear software architecture roadmap for implementors of patient identity management systems. Conceptual design in terms of static and dynamic views of the interfaces is provided as an example of platform independent model. This makes the roadmap applicable to any specific solutions of MPI, deduplication library or software platform. Stakeholders in need of integration of MPIs and deduplication engines can evaluate vendor specific solutions and software platform technologies in terms of fundamental concepts and can make informed decisions that preserve investment. This also allows freedom from vendor lock-in and the ability to kick-start integration efforts based on a solid architecture.

Translational Epidemiology in Psychiatry

PubMed Central

Weissman, Myrna M.; Brown, Alan S.; Talati, Ardesheer

2012-01-01

Translational research generally refers to the application of knowledge generated by advances in basic sciences research translated into new approaches for diagnosis, prevention, and treatment of disease. This direction is called bench-to-bedside. Psychiatry has similarly emphasized the basic sciences as the starting point of translational research. This article introduces the term translational epidemiology for psychiatry research as a bidirectional concept in which the knowledge generated from the bedside or the population can also be translated to the benches of laboratory science. Epidemiologic studies are primarily observational but can generate representative samples, novel designs, and hypotheses that can be translated into more tractable experimental approaches in the clinical and basic sciences. This bedside-to-bench concept has not been explicated in psychiatry, although there are an increasing number of examples in the research literature. This article describes selected epidemiologic designs, providing examples and opportunities for translational research from community surveys and prospective, birth cohort, and family-based designs. Rapid developments in informatics, emphases on large sample collection for genetic and biomarker studies, and interest in personalized medicine—which requires information on relative and absolute risk factors—make this topic timely. The approach described has implications for providing fresh metaphors to communicate complex issues in interdisciplinary collaborations and for training in epidemiology and other sciences in psychiatry. PMID:21646577

Reference Frames in Relativistic Space-Time

NASA Astrophysics Data System (ADS)

Soffel, M.; Herold, H.; Ruder, H.; Schneider, M.

Three fundamental concepts of reference frames in relativistic space-time are confronted: 1. the gravitation compass, 2. the stellar compass and 3. the inertial compass. It is argued that under certain conditions asymptotically fixed (stellar) reference frames can be introduced with the same rigour as local Fermi frames, thereby eliminating one possible psychological reason why the importance of Fermi frames frequently has been overestimated in the past. As applications of these three concepts the authors discuss: 1. a relativistic definition of the geoid, 2. a relativistic astrometric problem and 3. the post-Newtonian theory of a laser gyroscope fixed to the Earth's surface.

Soundscapes/Artabilitation - Evolution of a Hybrid Human Performance Concept, Method & Apparatus Where Digital Interactive Media, The Arts, & Entertainment are Combined

NASA Astrophysics Data System (ADS)

Brooks, A. L.

'SoundScapes' is a body of empirical research that for almost two decades has focused upon investigating noninvasive gesture control of multi-sensory stimuli and potential uses in therapy and the arts. In this context noninvasive gesture refers to motion in invisible activity zones of a system input device utilizing technology outside of human vision. Especially targeted are disabled people of all ages, and special focus has been on the profoundly impaired who especially have limited opportunities for creative self-articulation and playful interaction. The concept has been explored in various situations including: - live stage performances; interactive room installations for museums, workshops, and festivals; and in health-care sessions at hospitals, institutes and special schools. Multifaceted aspects continuously cross-inform in a systemic manner, and each situation where the motion-sensitive environment is applied is considered as a hybrid system. Whilst simplistic in concept, i.e. learning by playful and creative doings, inherent are complexities of optimizing the interactive system to user-experience and evaluation of same. This chapter presents the system in context to its conceived-for-target community; it also presents the parallel practice-led investigations in performance art. Reciprocal design and reflective cross-analysis of the activities has resulted such that performance informs design and strategies of intervention and evaluation with impaired users, and vice versa.

What Is Cyberspace?

ERIC Educational Resources Information Center

Bauwens, Michel

1994-01-01

Discusses the concept of cyberspace, defines three different levels that have been or will be attained, and compares it with mediaspace; examines the concept of virtualization, particularly the virtual library, and defines three different levels; and describes the concepts of cybrarians, cyberocracy, and cyberology. (Contains seven references.)…

The Internal/External Frame of Reference of Academic Self-Concept: Extension to a Foreign Language and the Role of Language of Instruction

ERIC Educational Resources Information Center

Xu, Man K.; Marsh, Herbert W.; Hau, Kit-Tai; Ho, Irene T.; Morin, Alexandre J. S.; Abduljabbar, Adel S.

2013-01-01

The internal/external frame of reference (I/E) model (Marsh, 1986) posits that the effects of contrasting math and verbal domains of achievement are positive for matching academic self-concepts (ASCs) but negative for nonmatching ASCs (i.e., math achievement on verbal ASC; verbal achievement on math ASC). We extend the classic I/E model by…

The Longitudinal Interplay of Students' Academic Self-Concepts and Achievements within and across Domains: Replicating and Extending the Reciprocal Internal/External Frame of Reference Model

ERIC Educational Resources Information Center

Niepel, Christoph; Brunner, Martin; Preckel, Franzis

2014-01-01

Students' cognitive and motivational profiles have a large impact on their academic careers. The development of such profiles can partly be explained by the reciprocal internal/external frame of reference model (RI/E model). The RI/E model predicts positive and negative longitudinal effects between academic self-concepts and achievements within…

Ethical issues in using Twitter for public health surveillance and research: developing a taxonomy of ethical concepts from the research literature.

PubMed

Conway, Mike

2014-12-22

The rise of social media and microblogging platforms in recent years, in conjunction with the development of techniques for the processing and analysis of "big data", has provided significant opportunities for public health surveillance using user-generated content. However, relatively little attention has been focused on developing ethically appropriate approaches to working with these new data sources. Based on a review of the literature, this study seeks to develop a taxonomy of public health surveillance-related ethical concepts that emerge when using Twitter data, with a view to: (1) explicitly identifying a set of potential ethical issues and concerns that may arise when researchers work with Twitter data, and (2) providing a starting point for the formation of a set of best practices for public health surveillance through the development of an empirically derived taxonomy of ethical concepts. We searched Medline, Compendex, PsycINFO, and the Philosopher's Index using a set of keywords selected to identify Twitter-related research papers that reference ethical concepts. Our initial set of queries identified 342 references across the four bibliographic databases. We screened titles and abstracts of these references using our inclusion/exclusion criteria, eliminating duplicates and unavailable papers, until 49 references remained. We then read the full text of these 49 articles and discarded 36, resulting in a final inclusion set of 13 articles. Ethical concepts were then identified in each of these 13 articles. Finally, based on a close reading of the text, a taxonomy of ethical concepts was constructed based on ethical concepts discovered in the papers. From these 13 articles, we iteratively generated a taxonomy of ethical concepts consisting of 10 top level categories: privacy, informed consent, ethical theory, institutional review board (IRB)/regulation, traditional research vs Twitter research, geographical information, researcher lurking, economic value of personal information, medical exceptionalism, and benefit of identifying socially harmful medical conditions. In summary, based on a review of the literature, we present a provisional taxonomy of public health surveillance-related ethical concepts that emerge when using Twitter data.

Ethical Issues in Using Twitter for Public Health Surveillance and Research: Developing a Taxonomy of Ethical Concepts From the Research Literature

PubMed Central

2014-01-01

Background The rise of social media and microblogging platforms in recent years, in conjunction with the development of techniques for the processing and analysis of “big data”, has provided significant opportunities for public health surveillance using user-generated content. However, relatively little attention has been focused on developing ethically appropriate approaches to working with these new data sources. Objective Based on a review of the literature, this study seeks to develop a taxonomy of public health surveillance-related ethical concepts that emerge when using Twitter data, with a view to: (1) explicitly identifying a set of potential ethical issues and concerns that may arise when researchers work with Twitter data, and (2) providing a starting point for the formation of a set of best practices for public health surveillance through the development of an empirically derived taxonomy of ethical concepts. Methods We searched Medline, Compendex, PsycINFO, and the Philosopher’s Index using a set of keywords selected to identify Twitter-related research papers that reference ethical concepts. Our initial set of queries identified 342 references across the four bibliographic databases. We screened titles and abstracts of these references using our inclusion/exclusion criteria, eliminating duplicates and unavailable papers, until 49 references remained. We then read the full text of these 49 articles and discarded 36, resulting in a final inclusion set of 13 articles. Ethical concepts were then identified in each of these 13 articles. Finally, based on a close reading of the text, a taxonomy of ethical concepts was constructed based on ethical concepts discovered in the papers. Results From these 13 articles, we iteratively generated a taxonomy of ethical concepts consisting of 10 top level categories: privacy, informed consent, ethical theory, institutional review board (IRB)/regulation, traditional research vs Twitter research, geographical information, researcher lurking, economic value of personal information, medical exceptionalism, and benefit of identifying socially harmful medical conditions. Conclusions In summary, based on a review of the literature, we present a provisional taxonomy of public health surveillance-related ethical concepts that emerge when using Twitter data. PMID:25533619

Concept analysis: lack of anonymity.

PubMed

Swan, Marilyn A; Hobbs, Barbara B

2017-05-01

To re-examine and expand understanding of the concept 'lack of anonymity' as a component of rural nursing theory. Early healthcare literature reports lack of anonymity as part of social and working environments, particularly rural nursing. Rural nursing theory included the first published concept analysis on lack of anonymity but lacked empirical referents. Workforce, societal and rural healthcare changes support an updated analysis. To further understand lack of anonymity, its present day use and applicability to diverse environments, research from multiple disciplines was reviewed. Concept analysis. A literature search using eight terms in eleven databases was conducted of literature published between 2008-2013. Walker and Avant's concept analysis methodology guided the analysis. The previous concept analysis is supported in part by current literature. The defining attributes, 'identifiable', 'establishing boundaries for public and private self and interconnectedness' in a community were updated. Updated antecedents include: (i) environmental context; (ii) opportunities to become visible; (iii) developing relationships and (iv) unconscious or limited awareness of public or personal privacy. Consequences are: (i) familiarity; (ii) visibility; (iii) awareness of privacy and (iv) manage or balance of lack of anonymity. Cases were constructed and empirical referents identified. The concept of lack of anonymity was updated; portions of the original definition remain unchanged. Empirical referents reveal the defining attributes in daily life and may guide future research on the effect of lack of anonymity on nursing practice. This analysis advances the conceptual understanding of rural nursing theory. © 2016 John Wiley & Sons Ltd.

Supramolecular assembly affording a ratiometric two-photon fluorescent nanoprobe for quantitative detection and bioimaging.

PubMed

Wang, Peng; Zhang, Cheng; Liu, Hong-Wen; Xiong, Mengyi; Yin, Sheng-Yan; Yang, Yue; Hu, Xiao-Xiao; Yin, Xia; Zhang, Xiao-Bing; Tan, Weihong

2017-12-01

Fluorescence quantitative analyses for vital biomolecules are in great demand in biomedical science owing to their unique detection advantages with rapid, sensitive, non-damaging and specific identification. However, available fluorescence strategies for quantitative detection are usually hard to design and achieve. Inspired by supramolecular chemistry, a two-photon-excited fluorescent supramolecular nanoplatform ( TPSNP ) was designed for quantitative analysis with three parts: host molecules (β-CD polymers), a guest fluorophore of sensing probes (Np-Ad) and a guest internal reference (NpRh-Ad). In this strategy, the TPSNP possesses the merits of (i) improved water-solubility and biocompatibility; (ii) increased tissue penetration depth for bioimaging by two-photon excitation; (iii) quantitative and tunable assembly of functional guest molecules to obtain optimized detection conditions; (iv) a common approach to avoid the limitation of complicated design by adjustment of sensing probes; and (v) accurate quantitative analysis by virtue of reference molecules. As a proof-of-concept, we utilized the two-photon fluorescent probe NHS-Ad-based TPSNP-1 to realize accurate quantitative analysis of hydrogen sulfide (H 2 S), with high sensitivity and good selectivity in live cells, deep tissues and ex vivo -dissected organs, suggesting that the TPSNP is an ideal quantitative indicator for clinical samples. What's more, TPSNP will pave the way for designing and preparing advanced supramolecular sensors for biosensing and biomedicine.

Beyond Self-Esteem: Some Neglected Aspects of the Self-Concept.

ERIC Educational Resources Information Center

Rosenberg, Morris

The purpose of this paper is to call attention to certain important aspects of self-concept which have been largely neglected in behavioral science research literature. Self-concept is defined as the totality of the individual's thoughts and feelings with reference to himself as an object. Three broad areas of self-concept are discussed. The first…

Educational Spaces of Cultural Capitalism: The Concept of Consumer Culture as a New Framework for Contemporary Educational Research

ERIC Educational Resources Information Center

Knobloch, Phillip D. Th.

2016-01-01

This article introduces a specific concept of consumer culture into the international and European discussion about new concepts and categories in comparative education. Basic meanings of consumer culture are presented in reference to consumer research, consumer culture theory, and a revisited concept of world polity. In addition to general…

Performance and Weight Estimates for an Advanced Open Rotor Engine

NASA Technical Reports Server (NTRS)

Hendricks, Eric S.; Tong, Michael T.

2012-01-01

NASA s Environmentally Responsible Aviation Project and Subsonic Fixed Wing Project are focused on developing concepts and technologies which may enable dramatic reductions to the environmental impact of future generation subsonic aircraft. The open rotor concept (also historically referred to an unducted fan or advanced turboprop) may allow for the achievement of this objective by reducing engine fuel consumption. To evaluate the potential impact of open rotor engines, cycle modeling and engine weight estimation capabilities have been developed. The initial development of the cycle modeling capabilities in the Numerical Propulsion System Simulation (NPSS) tool was presented in a previous paper. Following that initial development, further advancements have been made to the cycle modeling and weight estimation capabilities for open rotor engines and are presented in this paper. The developed modeling capabilities are used to predict the performance of an advanced open rotor concept using modern counter-rotating propeller designs. Finally, performance and weight estimates for this engine are presented and compared to results from a previous NASA study of advanced geared and direct-drive turbofans.

Digital Earth reloaded - Beyond the next generation

NASA Astrophysics Data System (ADS)

Ehlers, M.; Woodgate, P.; Annoni, A.; Schade, S.

2014-02-01

Digital replicas (or 'mirror worlds') of complex entities and systems are now routine in many fields such as aerospace engineering; archaeology; medicine; or even fashion design. The Digital Earth (DE) concept as a digital replica of the entire planet occurs in Al Gore's 1992 book Earth in the Balance and was popularized in his speech at the California Science Center in January 1998. It played a pivotal role in stimulating the development of a first generation of virtual globes, typified by Google Earth that achieved many elements of this vision. Almost 15 years after Al Gore's speech, the concept of DE needs to be re-evaluated in the light of the many scientific and technical developments in the fields of information technology, data infrastructures, citizen?s participation, and earth observation that have taken place since. This paper intends to look beyond the next generation predominantly based on the developments of fields outside the spatial sciences, where concepts, software, and hardware with strong relationships to DE are being developed without referring to this term. It also presents a number of guiding criteria for future DE developments.

Low turbulence/high efficiency cyclone separators: Facility qualification results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Razgaitis, R.; Paul, D.D.; Bioarski, A.A.

1985-01-01

The objective of this work is to experimentally investigate the near-wall turbulent flow-fields characteristic of cyclone separators in order to determine the influence of wall-originating turbulence on the separation of fine particles. In particular, seven turbulence suppression concepts will be evaluated with reference to a well-established baseline condition. Concepts which appear attractive will be studied and characterized in more detail. The work accomplished to date is principally the design, construction, and qualification of two of the facilities that will be used to study the various concepts of turbulence suppression. The qualification of the primary facility, the Cyclonic Wind Tunnel (CWT),more » has required the development and adaptation of laser Doppler velocimetry (LDV) to perform simultaneous two-dimensional turbulence measurements in a highly swirling flow. A companion facility to the CWT is the Curvilinear Boundary Layer (CBL) apparatus. The purpose of the CBL is to provide a thick, visually-observable near-wall flow region under dynamically similar conditions to the CWT to that a physical understanding of the turbulence suppression process can be obtained. 9 refs., 15 figs.« less

Better-Than-Visual Technologies for Next Generation Air Transportation System Terminal Maneuvering Area Operations

NASA Technical Reports Server (NTRS)

Prinzel, Lawrence J., III; Bailey, Randall E.; Shelton, Kevin J.; Jones, Denise R.; Kramer, Lynda J.; Arthur, Jarvis J., III; Williams, Steve P.; Barmore, Bryan E.; Ellis, Kyle E.; Rehfeld, Sherri A.

2011-01-01

A consortium of industry, academia and government agencies are devising new concepts for future U.S. aviation operations under the Next Generation Air Transportation System (NextGen). Many key capabilities are being identified to enable NextGen, including the concept of Equivalent Visual Operations (EVO) replicating the capacity and safety of today's visual flight rules (VFR) in all-weather conditions. NASA is striving to develop the technologies and knowledge to enable EVO and to extend EVO towards a Better-Than-Visual (BTV) operational concept. The BTV operational concept uses an electronic means to provide sufficient visual references of the external world and other required flight references on flight deck displays that enable VFR-like operational tempos and maintain and improve the safety of VFR while using VFR-like procedures in all-weather conditions. NASA Langley Research Center (LaRC) research on technologies to enable the concept of BTV is described.

Visual Learning in Application of Integration

NASA Astrophysics Data System (ADS)

Bt Shafie, Afza; Barnachea Janier, Josefina; Bt Wan Ahmad, Wan Fatimah

Innovative use of technology can improve the way how Mathematics should be taught. It can enhance student's learning the concepts through visualization. Visualization in Mathematics refers to us of texts, pictures, graphs and animations to hold the attention of the learners in order to learn the concepts. This paper describes the use of a developed multimedia courseware as an effective tool for visual learning mathematics. The focus is on the application of integration which is a topic in Engineering Mathematics 2. The course is offered to the foundation students in the Universiti Teknologi of PETRONAS. Questionnaire has been distributed to get a feedback on the visual representation and students' attitudes towards using visual representation as a learning tool. The questionnaire consists of 3 sections: Courseware Design (Part A), courseware usability (Part B) and attitudes towards using the courseware (Part C). The results showed that students demonstrated the use of visual representation has benefited them in learning the topic.

A new scenario framework for climate change research: The concept of Shared Climate Policy Assumptions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriegler, Elmar; Edmonds, James A.; Hallegatte, Stephane

2014-04-01

The paper presents the concept of shared climate policy assumptions as an important element of the new scenario framework. Shared climate policy assumptions capture key climate policy dimensions such as the type and scale of mitigation and adaptation measures. They are not specified in the socio-economic reference pathways, and therefore introduce an important third dimension to the scenario matrix architecture. Climate policy assumptions will have to be made in any climate policy scenario, and can have a significant impact on the scenario description. We conclude that a meaningful set of shared climate policy assumptions is useful for grouping individual climatemore » policy analyses and facilitating their comparison. Shared climate policy assumptions should be designed to be policy relevant, and as a set to be broad enough to allow a comprehensive exploration of the climate change scenario space.« less

A simplified scheme for computing radiation transfer in the troposphere

NASA Technical Reports Server (NTRS)

Katayama, A.

1973-01-01

A scheme is presented, for the heating of clear and cloudy air by solar and infrared radiation transfer, designed for use in tropospheric general circulation models with coarse vertical resolution. A bulk transmission function is defined for the infrared transfer. The interpolation factors, required for computing the bulk transmission function, are parameterized as functions of such physical parameters as the thickness of the layer, the pressure, and the mixing ratio at a reference level. The computation procedure for solar radiation is significantly simplified by the introduction of two basic concepts. The first is that the solar radiation spectrum can be divided into a scattered part, for which Rayleigh scattering is significant but absorption by water vapor is negligible, and an absorbed part for which absorption by water vapor is significant but Rayleigh scattering is negligible. The second concept is that of an equivalent cloud water vapor amount which absorbs the same amount of radiation as the cloud.

Development of a Free-Flight Simulation Infrastructure

NASA Technical Reports Server (NTRS)

Miles, Eric S.; Wing, David J.; Davis, Paul C.

1999-01-01

In anticipation of a projected rise in demand for air transportation, NASA and the FAA are researching new air-traffic-management (ATM) concepts that fall under the paradigm known broadly as ":free flight". This paper documents the software development and engineering efforts in progress by Seagull Technology, to develop a free-flight simulation (FFSIM) that is intended to help NASA researchers test mature-state concepts for free flight, otherwise referred to in this paper as distributed air / ground traffic management (DAG TM). Under development is a distributed, human-in-the-loop simulation tool that is comprehensive in its consideration of current and envisioned communication, navigation and surveillance (CNS) components, and will allow evaluation of critical air and ground traffic management technologies from an overall systems perspective. The FFSIM infrastructure is designed to incorporate all three major components of the ATM triad: aircraft flight decks, air traffic control (ATC), and (eventually) airline operational control (AOC) centers.

Design of environmental education module towards the needs of aboriginal community learning

NASA Astrophysics Data System (ADS)

Dasman, Siti Mariam; Yasin, Ruhizan Mohammad

2017-05-01

Non-formal education (NFE) refers to a program that is designed for personal and social education for learners to improve the level of skills and competencies outside formal educational curriculum. Issues related to geography and environment of different Aboriginal communities with other communities play an important role in determining the types and methods that should be made available to the minority community groups. Thus, this concept paper is intended to cater for educational environment through the design and development of learning modules based on non-formal education to the learning of Aboriginal community. Methods and techniques in the design and construction of the modules is based on the Design and Development Research (DDR) that was based on instructional design model of Morrison, Kemp and Ross which is more flexible and prioritizes the needs and characteristics of learners who were involved in the learning modules of the future. The discussion is related to the module development which is suitable to the learning needs of the community and there are several recommendations which may be applied in the implementation of this approach. In conclusion, the community of Orang Asli should be offered the same education as other communities but it is important to distinguish acceptance of learning techniques or approaches used in the education system to meet their standards. The implications of this concept paper is to meet the educational needs of the environment which includes a few aspects of science and some learning activities using effective approaches such as playing and building their own knowledge of meaning.

Faculty of Dentistry, Kuwait University, designated as a World Health Organization Collaborating Centre for Primary Oral Health Care.

PubMed

Behbehani, J M

2014-01-01

The Faculty of Dentistry, Kuwait University, was designated as a World Health Organization (WHO) Collaborating Centre for Primary Oral Health Care (POHC) in 2011. This article aimed to describe the following: (1) the background for this nomination, (2) the WHO Collaborating Centre for POHC, its terms of reference and 5 activities, (3) the primary health care concept as it was established in Alma-Ata, (4) the oral health situation in Kuwait and in the Middle-East region and, finally, (5) how POHC policy should be implemented in Kuwait and this region. It can be concluded that, because the caries experience is very high in Kuwait and in the other countries of the Eastern Mediterranean region, good POHC programmes should be designed and implemented in this region. The Faculty of Dentistry will strengthen its research tradition and as a WHO Collaborating Centre for POHC will try to collect information and experience from POHC in this region and exchange ideas between POHC experts in this region on how these programmes could be further developed. This will happen according to the terms of reference and activity plans of the WHO Collaborating Centre for POHC approved by the WHO Global Oral Health Programme. © 2014 S. Karger AG, Basel.

Faculty of Dentistry, Kuwait University, Designated as a World Health Organization Collaborating Centre for Primary Oral Health Care

PubMed Central

Behbehani, J.M.

2014-01-01

The Faculty of Dentistry, Kuwait University, was designated as a World Health Organization (WHO) Collaborating Centre for Primary Oral Health Care (POHC) in 2011. This article aimed to describe the following: (1) the background for this nomination, (2) the WHO Collaborating Centre for POHC, its terms of reference and 5 activities, (3) the primary health care concept as it was established in Alma-Ata, (4) the oral health situation in Kuwait and in the Middle-East region and, finally, (5) how POHC policy should be implemented in Kuwait and this region. It can be concluded that, because the caries experience is very high in Kuwait and in the other countries of the Eastern Mediterranean region, good POHC programmes should be designed and implemented in this region. The Faculty of Dentistry will strengthen its research tradition and as a WHO Collaborating Centre for POHC will try to collect information and experience from POHC in this region and exchange ideas between POHC experts in this region on how these programmes could be further developed. This will happen according to the terms of reference and activity plans of the WHO Collaborating Centre for POHC approved by the WHO Global Oral Health Programme. PMID:24504110

Ratiometric Matryoshka biosensors from a nested cassette of green- and orange-emitting fluorescent proteins.

PubMed

Ast, Cindy; Foret, Jessica; Oltrogge, Luke M; De Michele, Roberto; Kleist, Thomas J; Ho, Cheng-Hsun; Frommer, Wolf B

2017-09-05

Sensitivity, dynamic and detection range as well as exclusion of expression and instrumental artifacts are critical for the quantitation of data obtained with fluorescent protein (FP)-based biosensors in vivo. Current biosensors designs are, in general, unable to simultaneously meet all these criteria. Here, we describe a generalizable platform to create dual-FP biosensors with large dynamic ranges by employing a single FP-cassette, named GO-(Green-Orange) Matryoshka. The cassette nests a stable reference FP (large Stokes shift LSSmOrange) within a reporter FP (circularly permuted green FP). GO- Matryoshka yields green and orange fluorescence upon blue excitation. As proof of concept, we converted existing, single-emission biosensors into a series of ratiometric calcium sensors (MatryoshCaMP6s) and ammonium transport activity sensors (AmTryoshka1;3). We additionally identified the internal acid-base equilibrium as a key determinant of the GCaMP dynamic range. Matryoshka technology promises flexibility in the design of a wide spectrum of ratiometric biosensors and expanded in vivo applications.Single fluorescent protein biosensors are susceptible to expression and instrumental artifacts. Here Ast et al. describe a dual fluorescent protein design whereby a reference fluorescent protein is nested within a reporter fluorescent protein to control for such artifacts while preserving sensitivity and dynamic range.

Why are sex and gender important to basic physiology and translational and individualized medicine?

PubMed

Miller, Virginia M

2014-03-01

Sex refers to biological differences between men and women. Although sex is a fundamental aspect of human physiology that splits the population in two approximately equal halves, this essential biological variable is rarely considered in the design of basic physiological studies, in translating findings from basic science to clinical research, or in developing personalized medical strategies. Contrary to sex, gender refers to social and cultural factors related to being a man or a woman in a particular historical and cultural context. Unfortunately, gender is often used incorrectly by scientists and clinical investigators as synonymous with sex. This article clarifies the definition of sex and gender and reviews evidence showing how sex and gender interact with each other to influence etiology, presentation of disease, and treatment outcomes. In addition, strategies to improve the inclusion of female and male human beings in preclinical and clinical studies will be presented, and the importance of embedding concepts of sex and gender into postgraduate and medical curricula will be discussed. Also, provided is a list of resources for educators. In the history of medical concepts, physiologists have provided pivotal contributions to understanding health and disease processes. In the future, physiologists should provide the evidence for advancing personalized medicine and for reducing sex and gender disparities in health care.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marleau, Peter; Brubaker, Erik; Deland, Sharon M.

This report summarizes the discussion and conclusions reached during a table top exercise held at Sandia National Laboratories, Albuquerque on September 3, 2014 regarding a recently described approach for nuclear warhead verification based on the cryptographic concept of a zero-knowledge protocol (ZKP) presented in a recent paper authored by Glaser, Barak, and Goldston. A panel of Sandia National Laboratories researchers, whose expertise includes radiation instrumentation design and development, cryptography, and arms control verification implementation, jointly reviewed the paper and identified specific challenges to implementing the approach as well as some opportunities. It was noted that ZKP as used in cryptographymore » is a useful model for the arms control verification problem, but the direct analogy to arms control breaks down quickly. The ZKP methodology for warhead verification fits within the general class of template-based verification techniques, where a reference measurement is used to confirm that a given object is like another object that has already been accepted as a warhead by some other means. This can be a powerful verification approach, but requires independent means to trust the authenticity of the reference warhead - a standard that may be difficult to achieve, which the ZKP authors do not directly address. Despite some technical challenges, the concept of last-minute selection of the pre-loads and equipment could be a valuable component of a verification regime.« less

Why are sex and gender important to basic physiology and translational and individualized medicine?

PubMed Central

2014-01-01

Sex refers to biological differences between men and women. Although sex is a fundamental aspect of human physiology that splits the population in two approximately equal halves, this essential biological variable is rarely considered in the design of basic physiological studies, in translating findings from basic science to clinical research, or in developing personalized medical strategies. Contrary to sex, gender refers to social and cultural factors related to being a man or a woman in a particular historical and cultural context. Unfortunately, gender is often used incorrectly by scientists and clinical investigators as synonymous with sex. This article clarifies the definition of sex and gender and reviews evidence showing how sex and gender interact with each other to influence etiology, presentation of disease, and treatment outcomes. In addition, strategies to improve the inclusion of female and male human beings in preclinical and clinical studies will be presented, and the importance of embedding concepts of sex and gender into postgraduate and medical curricula will be discussed. Also, provided is a list of resources for educators. In the history of medical concepts, physiologists have provided pivotal contributions to understanding health and disease processes. In the future, physiologists should provide the evidence for advancing personalized medicine and for reducing sex and gender disparities in health care. PMID:24414073

Detecting the presence of an indwelling urinary catheter and urinary symptoms in hospitalized patients using natural language processing.

PubMed

Gundlapalli, Adi V; Divita, Guy; Redd, Andrew; Carter, Marjorie E; Ko, Danette; Rubin, Michael; Samore, Matthew; Strymish, Judith; Krein, Sarah; Gupta, Kalpana; Sales, Anne; Trautner, Barbara W

2017-07-01

To develop a natural language processing pipeline to extract positively asserted concepts related to the presence of an indwelling urinary catheter in hospitalized patients from the free text of the electronic medical note. The goal is to assist infection preventionists and other healthcare professionals in determining whether a patient has an indwelling urinary catheter when a catheter-associated urinary tract infection is suspected. Currently, data on indwelling urinary catheters is not consistently captured in the electronic medical record in structured format and thus cannot be reliably extracted for clinical and research purposes. We developed a lexicon of terms related to indwelling urinary catheters and urinary symptoms based on domain knowledge, prior experience in the field, and review of medical notes. A reference standard of 1595 randomly selected documents from inpatient admissions was annotated by human reviewers to identify all positively and negatively asserted concepts related to indwelling urinary catheters. We trained a natural language processing pipeline based on the V3NLP framework using 1050 documents and tested on 545 documents to determine agreement with the human reference standard. Metrics reported are positive predictive value and recall. The lexicon contained 590 terms related to the presence of an indwelling urinary catheter in various categories including insertion, care, change, and removal of urinary catheters and 67 terms for urinary symptoms. Nursing notes were the most frequent inpatient note titles in the reference standard document corpus; these also yielded the highest number of positively asserted concepts with respect to urinary catheters. Comparing the performance of the natural language processing pipeline against the human reference standard, the overall recall was 75% and positive predictive value was 99% on the training set; on the testing set, the recall was 72% and positive predictive value was 98%. The performance on extracting urinary symptoms (including fever) was high with recall and precision greater than 90%. We have shown that it is possible to identify the presence of an indwelling urinary catheter and urinary symptoms from the free text of electronic medical notes from inpatients using natural language processing. These are two key steps in developing automated protocols to assist humans in large-scale review of patient charts for catheter-associated urinary tract infection. The challenges associated with extracting indwelling urinary catheter-related concepts also inform the design of electronic medical record templates to reliably and consistently capture data on indwelling urinary catheters. Published by Elsevier Inc.

Space Nuclear Thermal Propulsion (SNTP) Air Force facility

NASA Technical Reports Server (NTRS)

Beck, David F.

1993-01-01

The Space Nuclear Thermal Propulsion (SNTP) Program is an initiative within the US Air Force to acquire and validate advanced technologies that could be used to sustain superior capabilities in the area or space nuclear propulsion. The SNTP Program has a specific objective of demonstrating the feasibility of the particle bed reactor (PBR) concept. The term PIPET refers to a project within the SNTP Program responsible for the design, development, construction, and operation of a test reactor facility, including all support systems, that is intended to resolve program technology issues and test goals. A nuclear test facility has been designed that meets SNTP Facility requirements. The design approach taken to meet SNTP requirements has resulted in a nuclear test facility that should encompass a wide range of nuclear thermal propulsion (NTP) test requirements that may be generated within other programs. The SNTP PIPET project is actively working with DOE and NASA to assess this possibility.

User's Guide for Monthly Vector Wind Profile Model

NASA Technical Reports Server (NTRS)

Adelfang, S. I.

1999-01-01

The background, theoretical concepts, and methodology for construction of vector wind profiles based on a statistical model are presented. The derived monthly vector wind profiles are to be applied by the launch vehicle design community for establishing realistic estimates of critical vehicle design parameter dispersions related to wind profile dispersions. During initial studies a number of months are used to establish the model profiles that produce the largest monthly dispersions of ascent vehicle aerodynamic load indicators. The largest monthly dispersions for wind, which occur during the winter high-wind months, are used for establishing the design reference dispersions for the aerodynamic load indicators. This document includes a description of the computational process for the vector wind model including specification of input data, parameter settings, and output data formats. Sample output data listings are provided to aid the user in the verification of test output.

Establishment of design criteria for acceptable failure modes and fail safe considerations for the space shuttle structural system

NASA Technical Reports Server (NTRS)

Westrup, R. W.

1972-01-01

Investigations of fatigue life, and safe-life and fail-safe design concepts as applied to space shuttle structure are summarized. The results are evaluated to select recommended structural design criteria to provide assurance that premature failure due to propagation of undetected crack-like defects will not occur during shuttle operational service. The space shuttle booster, GDC configuration B-9U, is selected as the reference vehicle. Structural elements used as basis of detail analyses include wing spar caps, vertical stabilizer skins, crew compartment skin, orbiter support frame, and propellant tank shell structure. Fatigue life analyses of structural elements are performed to define potential problem areas and establish upper limits of operating stresses. Flaw growth analyses are summarized in parametric form over a range of initial flaw types and sizes, operating stresses and service life requirements. Service life of 100 to 500 missions is considered.

The Path to a UV/optical/IR Flagship: ATLAST and Its Predecessors

NASA Technical Reports Server (NTRS)

Thronson, Harley; Bolcar, Matthew R.; Clampin, Mark; Crooke, Julie; Feinberg, Lee; Oegerle, William; Postman, Marc; Rioux, Norman; Stahl, H. Philip; Stapelfeldt, Karl

2016-01-01

The recently completed study for the Advanced Technology Large-Aperture Telescope (ATLAST) was the culmination of three years of work that built upon earlier engineering designs, science objectives, and sustained recommendations for technology investments. Since the mid-1980s, multiple teams of astronomers, technologists, and engineers have developed concepts for a large-aperture UV/optical/IR space observatory to follow the Hubble Space Telescope (HST). Especially over the past decade, technology advances and exciting scientific results has led to growing support for development in the 2020s of a large UVOIR space observatory. Here we summarize the history of major mission designs, scientific goals, key technology recommendations, community workshops and conferences, and recommendations to NASA for a major UV/optical/IR observatory to follow HST. We conclude with a capsule summary of the ATLAST reference design developed over the past three years.

Does ought imply can?

PubMed Central

Kurthy, Miklos; Lawford-Smith, Holly; Sousa, Paulo

2017-01-01

Most philosophers believe that a person can have an obligation only insofar as she is able to fulfil it, a principle generally referred to as “Ought Implies Can”. Arguably, this principle reflects something basic about the ordinary concept of obligation. However, in a paper published recently in this journal, Wesley Buckwalter and John Turri presented evidence for the conclusion that ordinary people in fact reject that principle. With a series of studies, they claimed to have demonstrated that, in people’s judgements, obligations persist irrespective of whether those who hold them have the ability to fulfil them. We argue in this paper that due to some problems in their design, Buckwalter & Turri’s conclusions may not be warranted. We present the results of a series of studies demonstrating the problems with their design and showing that, with an improved design, people judge that obligation depends on ability after all. PMID:28403195

[Early Egyptian forerunners of the Paranatellonta?].

PubMed

Quack, J F

1999-01-01

The term "paranatellonta" is well-known in greek astrological literature. It designates stars either rising together with the sun or being in other conspicuous positions to it. Tentatively, a forerunner of this conception is identified in an egyptian depiction attested several times from the 13th century BC onwards. There, "gods" are depicted who are defined by their positions in regard to the sun-god. It seems possible to connect their positions with the typical meanings of the word paranatellonta. Some reflections on the contribution of Egypt to hellenistic astrology are added, including some references to the largely unpublished corpus of demotic egyptian astrological texts.

Forecast analysis of optical waveguide bus performance

NASA Technical Reports Server (NTRS)

Ledesma, R.; Rourke, M. D.

1979-01-01

Elements to be considered in the design of a data bus include: architecture; data rate; modulation, encoding, detection; power distribution requirements; protocol, work structure; bus reliability, maintainability; interterminal transmission medium; cost; and others specific to application. Fiber- optic data bus considerations for a 32 port transmissive star architecture, are discussed in a tutorial format. General optical-waveguide bus concepts, are reviewed. The electrical and optical performance of a 32 port transmissive star bus, and the effects of temperature on the performance of optical-waveguide buses are examined. A bibliography of pertinent references and the bus receiver test results are included.

Implementation of a Sage-Based Stirling Model Into a System-Level Numerical Model of the Fission Power System Technology Demonstration Unit

NASA Technical Reports Server (NTRS)

Briggs, Maxwell H.

2011-01-01

The Fission Power System (FPS) project is developing a Technology Demonstration Unit (TDU) to verify the performance and functionality of a subscale version of the FPS reference concept in a relevant environment, and to verify component and system models. As hardware is developed for the TDU, component and system models must be refined to include the details of specific component designs. This paper describes the development of a Sage-based pseudo-steady-state Stirling convertor model and its implementation into a system-level model of the TDU.

Introduction to computers: Reference guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ligon, F.V.

1995-04-01

The ``Introduction to Computers`` program establishes formal partnerships with local school districts and community-based organizations, introduces computer literacy to precollege students and their parents, and encourages students to pursue Scientific, Mathematical, Engineering, and Technical careers (SET). Hands-on assignments are given in each class, reinforcing the lesson taught. In addition, the program is designed to broaden the knowledge base of teachers in scientific/technical concepts, and Brookhaven National Laboratory continues to act as a liaison, offering educational outreach to diverse community organizations and groups. This manual contains the teacher`s lesson plans and the student documentation to this introduction to computer course.

Beamforming strategy of ULA and UCA sensor configuration in multistatic passive radar

NASA Astrophysics Data System (ADS)

Hossa, Robert

2009-06-01

A Beamforming Network (BN) concept of Uniform Linear Array (ULA) and Uniform Circular Array (UCA) dipole configuration designed to multistatic passive radar is considered in details. In the case of UCA configuration, computationally efficient procedure of beamspace transformation from UCA to virtual ULA configuration with omnidirectional coverage is utilized. If effect, the idea of the proposed solution is equivalent to the techniques of antenna array factor shaping dedicated to ULA structure. Finally, exemplary results from the computer software simulations of elaborated spatial filtering solutions to reference and surveillance channels are provided and discussed.

Manned Mars mission health maintenance facility

NASA Technical Reports Server (NTRS)

Degioanni, Joseph C.

1986-01-01

The Health Maintenance Facility (HMF) requirements which enable/enhance manned Mars missions (MMMs) are addressed. It does not attempt to resolve any issues that may affect the feasibility of any given element in the HMF. Reference is made to current work being conducted in the design of the space station HMF. The HMF requirements are discussed within the context of two distinctly different scenarios: HMF as part of the Mars surface infrastructure, and HMF as part of the nine months translation from low Earth orbit to Mars orbit. Requirements for an HMF are provided, and a concept of HMF is shown.

Biomarkers intersect with the exposome

PubMed Central

Rappaport, Stephen M.

2016-01-01

The exposome concept promotes use of omic tools for discovering biomarkers of exposure and biomarkers of disease in studies of diseased and healthy populations. A two-stage scheme is presented for profiling omic features in serum to discover molecular biomarkers and then for applying these biomarkers in follow-up studies. The initial component, referred to as an exposome-wide-association study (EWAS), employs metabolomics and proteomics to interrogate the serum exposome and, ultimately, to identify, validate and differentiate biomarkers of exposure and biomarkers of disease. Follow-up studies employ knowledge-driven designs to explore disease causality, prevention, diagnosis, prognosis and treatment. PMID:22672124

A stable submillimeter laser local oscillator for heterodyne radiometry and spectroscopy

NASA Technical Reports Server (NTRS)

Koepf, G. A.; Fetterman, H. R.; Mcavoy, N.

1980-01-01

A submillimeter laser with off-axis pump beam injection is described. This design concept achieves complete isolation of the pump laser with respect to the pump radiation reflected from the submillimeter resonator. Active line independent stabilization of the pump laser is obtained by the use of an external tunable etalon as a frequency reference. The submillimeter output power is constant to within 4% over periods of hours. Mean frequency drifts of less than 2 parts in 100 million per minute were measured by mixing with very high harmonics of an X-band synthesizer in a planar Schottky diode.

Sustainability in nursing: a concept analysis

PubMed Central

Anåker, Anna; Elf, Marie

2014-01-01

Aim The aim of this study was to describe, explore and explain the concept of sustainability in nursing. Background Although researchers in nursing and medicine have emphasised the issue of sustainability and health, the concept of sustainability in nursing is undefined and poorly researched. A need exists for theoretical and empirical studies of sustainability in nursing. Design Concept analysis as developed by Walker and Avant. Method Data were derived from dictionaries, international healthcare organisations and literature searches in the CINAHL and MEDLINE databases. Inclusive years for the search ranged from 1990 to 2012. A total of fourteen articles were found that referred to sustainability in nursing. Results Sustainability in nursing involves six defining attributes: ecology, environment, future, globalism, holism and maintenance. Antecedents of sustainability require climate change, environmental impact and awareness, confidence in the future, responsibility and a willingness to change. Consequences of sustainability in nursing include education in the areas of ecology, environment and sustainable development as well as sustainability as a part of nursing academic programs and in the description of the academic subject of nursing. Sustainability should also be part of national and international healthcare organisations. The concept was clarified herein by giving it a definition. Conclusion Sustainability in nursing was explored and found to contribute to sustainable development, with the ultimate goal of maintaining an environment that does not harm current and future generations′ opportunities for good health. This concept analysis provides recommendations for the healthcare sector to incorporate sustainability and provides recommendations for future research. PMID:24602178

World Class Schools: An Evolving Concept.

ERIC Educational Resources Information Center

Jenkins, John M., Ed.; And Others

The concept of "world class," often used in reference to education, lacks a precise, universal definition. This book presents case studies of exemplary schools. The foreword by Fenwick W. English presents a developmental concept of world-class education, in which fair and comparable standards, with sufficient room for sociocultural…

Quantity quotient reporting. A proposal for a standardized presentation of laboratory results.

PubMed

Haeckel, Rainer; Wosniok, Werner

2009-01-01

Laboratory results are reported in different units (despite international recommendations for SI units) together with different reference limits, of which several exist for many quantities. It is proposed to adopt the concept of the intelligence quotient and to report quantitative results as a quantity quotient (QQ) in laboratory medicine. This quotient is essentially the difference (measured result minus mean or mode value of the reference interval) divided by the observed biological variation CV(o). Thus, all quantities are reported in the same unit system with the same reference limits (for convenience shifted to e.g., 80-120). The critical difference can also be included in this standardization concept. In this way the information of reference intervals and the original result are integrated into one combined value, which has the same format for all quantities suited for quotient reporting (QR). The proposal of QR does not interfere with neither the current concepts of traceability, SI units or method standardization. This proposal represents a further step towards harmonization of reporting. It provides simple values which can be interpreted easily by physicians and their patients.

Calling Biomarkers in Milk Using a Protein Microarray on Your Smartphone

PubMed Central

Ludwig, Susann K. J.; Tokarski, Christian; Lang, Stefan N.; van Ginkel, Leendert A.; Zhu, Hongying; Ozcan, Aydogan; Nielen, Michel W. F.

2015-01-01

Here we present the concept of a protein microarray-based fluorescence immunoassay for multiple biomarker detection in milk extracts by an ordinary smartphone. A multiplex immunoassay was designed on a microarray chip, having built-in positive and negative quality controls. After the immunoassay procedure, the 48 microspots were labelled with Quantum Dots (QD) depending on the protein biomarker levels in the sample. QD-fluorescence was subsequently detected by the smartphone camera under UV light excitation from LEDs embedded in a simple 3D-printed opto-mechanical smartphone attachment. The somewhat aberrant images obtained under such conditions, were corrected by newly developed Android-based software on the same smartphone, and protein biomarker profiles were calculated. The indirect detection of recombinant bovine somatotropin (rbST) in milk extracts based on altered biomarker profile of anti-rbST antibodies was selected as a real-life challenge. RbST-treated and untreated cows clearly showed reproducible treatment-dependent biomarker profiles in milk, in excellent agreement with results from a flow cytometer reference method. In a pilot experiment, anti-rbST antibody detection was multiplexed with the detection of another rbST-dependent biomarker, insulin-like growth factor 1 (IGF-1). Milk extract IGF-1 levels were found to be increased after rbST treatment and correlated with the results obtained from the reference method. These data clearly demonstrate the potential of the portable protein microarray concept towards simultaneous detection of multiple biomarkers. We envisage broad application of this ‘protein microarray on a smartphone’-concept for on-site testing, e.g., in food safety, environment and health monitoring. PMID:26308444

Psychoneurometric operationalization of threat sensitivity: Relations with clinical symptom and physiological response criteria.

PubMed

Yancey, James R; Venables, Noah C; Patrick, Christopher J

2016-03-01

The National Institute of Mental Health's Research Domain Criteria (RDoC) initiative calls for the incorporation of neurobiological approaches and findings into conceptions of mental health problems through a focus on biobehavioral constructs investigated across multiple domains of measurement (units of analysis). Although the constructs in the RDoC system are characterized in "process terms" (i.e., as functional concepts with brain and behavioral referents), these constructs can also be framed as dispositions (i.e., as dimensions of variation in biobehavioral functioning across individuals). Focusing on one key RDoC construct, acute threat or "fear," the current article illustrates a construct-oriented psychoneurometric strategy for operationalizing this construct in individual difference terms-as threat sensitivity (THT+). Utilizing data from 454 adult participants, we demonstrate empirically that (a) a scale measure of THT+ designed to tap general fear/fearlessness predicts effectively to relevant clinical problems (i.e., fear disorder symptoms), (b) this scale measure shows reliable associations with physiological indices of acute reactivity to aversive visual stimuli, and (c) a cross-domain factor reflecting the intersection of scale and physiological indicators of THT+ predicts effectively to both clinical and neurophysiological criterion measures. Results illustrate how the psychoneurometric approach can be used to create a dimensional index of a biobehavioral trait construct, in this case THT+, which can serve as a bridge between phenomena in domains of psychopathology and neurobiology. Implications and future directions are discussed with reference to the RDoC initiative and existing report-based conceptions of psychological traits. © 2016 Society for Psychophysiological Research.

Detecteur multibandes libs a base de reseaux holographiques epais: Conception optomecanique et gestion de l'innovation

NASA Astrophysics Data System (ADS)

Gagnon, Daniel

Detection of sulfur by optical emission spectroscopy generally presents difficulties because the strongest lines are in the vacuum ultraviolet and therefore are readily absorbed by oxygen molecules in air. A novel concept for a low cost and efficient system to detect sulfur using near infrared lines by Laser-Induced Breakdown Spectroscopy is proposed in this thesis. The concept proposes to use customized thick holographic gratings, also referred as Volume Bragg Grating, for spectral filtering of the plasma light, and built-in custom electronics that amplify and integrate photodiodes output signals. In this work, the optomechanical design, manufacturing and trials of a multiband sensor's prototype is reviewed. Preliminary results has been presented at NASLIBS 2011 and showed a limit of detection comparable to that of a conventional high-end system. An article describing the concept and results has been published in a special issue of the Applied Optics journal. To turn this newly patented concept into commercial success, the management of the innovation has been performed by proposing strategic and tactic alliances for commercialisation purposes applied to strategic business positioning structured along the 3 axis Technology -- Product -- Market. Open innovation is here acting as the paradigm to efficiently reach the market. Discussion relative to strategic and tactic alliance is actually taking place for deployment of the LIBS multiband sensor in the mining industry.

A Systematic Framework and Nanoperiodic Concept for Unifying Nanoscience: Hard/Soft Nanoelements, Superatoms, Meta-Atoms, New Emerging Properties, Periodic Property Patterns, and Predictive Mendeleev-like Nanoperiodic Tables.

PubMed

Tomalia, Donald A; Khanna, Shiv N

2016-02-24

Development of a central paradigm is undoubtedly the single most influential force responsible for advancing Dalton's 19th century atomic/molecular chemistry concepts to the current maturity enjoyed by traditional chemistry. A similar central dogma for guiding and unifying nanoscience has been missing. This review traces the origins, evolution, and current status of such a critical nanoperiodic concept/framework for defining and unifying nanoscience. Based on parallel efforts and a mutual consensus now shared by both chemists and physicists, a nanoperiodic/systematic framework concept has emerged. This concept is based on the well-documented existence of discrete, nanoscale collections of traditional inorganic/organic atoms referred to as hard and soft superatoms (i.e., nanoelement categories). These nanometric entities are widely recognized to exhibit nanoscale atom mimicry features reminiscent of traditional picoscale atoms. All unique superatom/nanoelement physicochemical features are derived from quantized structural control defined by six critical nanoscale design parameters (CNDPs), namely, size, shape, surface chemistry, flexibility/rigidity, architecture, and elemental composition. These CNDPs determine all intrinsic superatom properties, their combining behavior to form stoichiometric nanocompounds/assemblies as well as to exhibit nanoperiodic properties leading to new nanoperiodic rules and predictive Mendeleev-like nanoperiodic tables, and they portend possible extension of these principles to larger quantized building blocks including meta-atoms.

Translational research: a concept analysis.

PubMed

Wendler, M Cecilia; Kirkbride, Geri; Wade, Kristen; Ferrell, Lynne

2013-01-01

BACKGROUND/CONCEPTUAL FRAMEWORK: Little is known about which approaches facilitate adoption and sustainment of evidence-based practice change in the highly complex care environments that constitute clinical practice today. The purpose of this article was to complete a concept analysis of translational research using a modified Walker and Avant approach. DESIGN/DATA COLLECTION: Using a rigorous and thorough review of the recent health care literature generated by a deep electronic search from 2004-2011, 85 appropriate documents were retrieved. Close reading of the articles by three coresearchers yielded an analysis of the emerging concept of translational research. Using the iterative process described by Walker and Avant, a tentative definition of the concept of translational research, along with antecedents and consequences were identified. Implications for health care professionals in education, practice, and research are offered. Further research is needed to determine the adequacy of the definition, to identify empirical referents, and to guide theory development. The study resulted in a theoretical definition of the concept of translational research, along with identification of antecedents and consequences and a description of an ideal or model case to illustrate the definition. Implications for practice and education include the importance of focusing on translational research approaches that may reduce the research-practice gap in health care, thereby improving patient care delivery. Research is needed to determine the usefulness of the definition in health care clinical practice.

Executive Summary of Ares V: Lunar Capabilities Concept Review Through Phase A-Cycle 3

NASA Technical Reports Server (NTRS)

Holladay, J. B.; Baggett, K. E.; Feldman, S. M.

2011-01-01

This Technical Memorandum (TM) was generated as an overall Ares V summary from the Lunar Capabilities Concept Review (LCCR) through Phase A-Cycle 3 (PA-C3) with the intent that it may be coupled with separately published appendices for a more detailed, integrated narrative. The Ares V has evolved from the initial point of departure (POD) 51.00.48 LCCR configuration to the current candidate POD, PA-C3D, and the family of vehicles concept that contains vehicles PA-C3A through H. The logical progression from concept to POD vehicles is summarized in this TM and captures the trade space and performance of each. The family-of-vehicles concept was assessed during PA-C3 and offered flexibility in the path forward with the ability to add options deemed appropriate. A description of each trade space is given in addition to a summary of each Ares V element. The Ares V contributions to a Mars campaign are also highlighted with the goal of introducing Ares V capabilities within the trade space. The assessment of the Ares V vehicle as it pertains to Mars missions remained locked to the architecture presented in Mars Design Reference Authorization 5.0 using the PA-C3D vehicle configuration to assess Mars transfer vehicle options, in-space EDS capabilities, docking adaptor and propellant transfer assessments, and lunar and Mars synergistic potential.

Safety Guided Design of Crew Return Vehicle in Concept Design Phase Using STAMP/STPA

NASA Astrophysics Data System (ADS)

Nakao, H.; Katahira, M.; Miyamoto, Y.; Leveson, N.

2012-01-01

In the concept development and design phase of a new space system, such as a Crew Vehicle, designers tend to focus on how to implement new technology. Designers also consider the difficulty of using the new technology and trade off several system design candidates. Then they choose an optimal design from the candidates. Safety should be a key aspect driving optimal concept design. However, in past concept design activities, safety analysis such as FTA has not used to drive the design because such analysis techniques focus on component failure and component failure cannot be considered in the concept design phase. The solution to these problems is to apply a new hazard analysis technique, called STAMP/STPA. STAMP/STPA defines safety as a control problem rather than a failure problem and identifies hazardous scenarios and their causes. Defining control flow is the essential in concept design phase. Therefore STAMP/STPA could be a useful tool to assess the safety of system candidates and to be part of the rationale for choosing a design as the baseline of the system. In this paper, we explain our case study of safety guided concept design using STPA, the new hazard analysis technique, and model-based specification technique on Crew Return Vehicle design and evaluate benefits of using STAMP/STPA in concept development phase.

Techniques for Conducting Effective Concept Design and Design-to-Cost Trade Studies

NASA Technical Reports Server (NTRS)

Di Pietro, David A.

2015-01-01

Concept design plays a central role in project success as its product effectively locks the majority of system life cycle cost. Such extraordinary leverage presents a business case for conducting concept design in a credible fashion, particularly for first-of-a-kind systems that advance the state of the art and that have high design uncertainty. A key challenge, however, is to know when credible design convergence has been achieved in such systems. Using a space system example, this paper characterizes the level of convergence needed for concept design in the context of technical and programmatic resource margins available in preliminary design and highlights the importance of design and cost evaluation learning curves in determining credible convergence. It also provides techniques for selecting trade study cases that promote objective concept evaluation, help reveal unknowns, and expedite convergence within the trade space and conveys general practices for conducting effective concept design-to-cost studies.

A new torsion pendulum for testing enhancements to the LISA Gravitational Reference Sensor

NASA Astrophysics Data System (ADS)

Conklin, John; Chilton, A.; Ciani, G.; Mueller, G.; Olatunde, T.; Shelley, R.

2014-01-01

The Laser Interferometer Space Antenna (LISA), the most mature concept for observing gravitational waves from space, consists of three Sun-orbiting spacecraft that form a million km-scale equilateral triangle. Each spacecraft houses two free-floating test masses (TM), which are protected from disturbing forces so that they follow pure geodesics in spacetime. A single test mass together with its housing and associated components is referred to as a gravitational reference sensor (GRS). Laser interferometry is used to measure the minute variations in the distance between these free-falling TMs, caused by gravitational waves. The demanding acceleration noise requirement of 3E-15 m/sec^2Hz^1/2 for the LISA GRS has motivated a rigorous testing campaign in Europe and a dedicated technology mission, LISA Pathfinder, scheduled for launch in 2015. Recently, efforts have begun in the U.S. to design and assemble a new, nearly thermally noise limited torsion pendulum for testing GRS technology enhancements and for understanding the dozens of acceleration noise sources that affect the performance of the GRS. This experimental facility is based on the design of a similar facility at the University of Trento, and will consist of a vacuum enclosed torsion pendulum that suspends mock-ups of the LISA test masses, surrounded by electrode housings. The GRS technology enhancements under development include a novel TM charge control scheme based on ultraviolet LEDs, simplified capacitive readout electronics, and a six degree-of-freedom, all-optical TM sensor. This presentation will describe the design of the torsion pendulum facility, its expected performance, and the potential technology enhancements.

Performance Validation Approach for the GTX Air-Breathing Launch Vehicle

NASA Technical Reports Server (NTRS)

Trefny, Charles J.; Roche, Joseph M.

2002-01-01

The primary objective of the GTX effort is to determine whether or not air-breathing propulsion can enable a launch vehicle to achieve orbit in a single stage. Structural weight, vehicle aerodynamics, and propulsion performance must be accurately known over the entire flight trajectory in order to make a credible assessment. Structural, aerodynamic, and propulsion parameters are strongly interdependent, which necessitates a system approach to design, evaluation, and optimization of a single-stage-to-orbit concept. The GTX reference vehicle serves this purpose, by allowing design, development, and validation of components and subsystems in a system context. The reference vehicle configuration (including propulsion) was carefully chosen so as to provide high potential for structural and volumetric efficiency, and to allow the high specific impulse of air-breathing propulsion cycles to be exploited. Minor evolution of the configuration has occurred as analytical and experimental results have become available. With this development process comes increasing validation of the weight and performance levels used in system performance determination. This paper presents an overview of the GTX reference vehicle and the approach to its performance validation. Subscale test rigs and numerical studies used to develop and validate component performance levels and unit structural weights are outlined. The sensitivity of the equivalent, effective specific impulse to key propulsion component efficiencies is presented. The role of flight demonstration in development and validation is discussed.

Tone as a health concept: An analysis.

PubMed

McDowall, Donald; Emmanuel, Elizabeth; Grace, Sandra; Chaseling, Marilyn

2017-11-01

Concept analysis. This paper is a report on the analysis of the concept of tone in chiropractic. The purpose of this paper is to clarify the concept of tone as originally understood by Daniel David Palmer from 1895 to 1914 and to monitor its evolution over time. Data was sourced from Palmer's original work, published between 1895 and 1914. A literature search from 1980 to 2016 was also performed on the online databases CINHAL, PubMed and Scopus with key terms including 'tone', 'chiropractic', 'Palmer', 'vitalism', 'health', 'homeostasis', 'holism' and 'wellness'. Finally hand-searches were conducted through chiropractic books and professional literature from 1906 to 1980 for any references to 'tone'. Rodgers' evolutionary method of analysis was used to categorise the data in relation to the surrogates, attributes, references, antecedents and consequences of tone. A total of 49 references were found: five from publications by Palmer; three from the database searches, and; the remaining 41 from professional books, trade journals and websites. There is no clear interpretation of tone in the contemporary chiropractic literature. Tone is closely aligned with functional neurology and can be understood as an interface between the metaphysical and the biomedical. Using the concept of tone as a foundation for practice could strengthen the identity of the chiropractic profession. Copyright © 2017 Elsevier Ltd. All rights reserved.

Optical character recognition based on nonredundant correlation measurements.

PubMed

Braunecker, B; Hauck, R; Lohmann, A W

1979-08-15

The essence of character recognition is a comparison between the unknown character and a set of reference patterns. Usually, these reference patterns are all possible characters themselves, the whole alphabet in the case of letter characters. Obviously, N analog measurements are highly redundant, since only K = log(2)N binary decisions are enough to identify one out of N characters. Therefore, we devised K reference patterns accordingly. These patterns, called principal components, are found by digital image processing, but used in an optical analog computer. We will explain the concept of principal components, and we will describe experiments with several optical character recognition systems, based on this concept.

1170 MW/sub t/ HTGR steamer cogeneration plant: design and cost study

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

A conceptual design and cost study is presented for intermediate size high temperature gas-cooled reactor (HTGR) for industrial energy applications performed by United Engineers and Constructors Inc., (UE and C) and The General Atomic Company (GAC). The study is part of a program at ORNL and has the objective to provide support in the evaluation of the technical and economic feasibility of a single unit 1170 MW/sub t/ HTGR steam cycle cogeneration plant (referred to as the Steamer plant) for the production of industrial process energy. Inherent in the achievement of this objective, it was essential to perform a numbermore » of basic tasks such as the development of plant concept, capital cost estimate, project schedule and annual operation and maintenance (O and M) cost.« less

[Measuring the impact of practices of social appropriation of science and technology: a proposal for a set of indicators].

PubMed

Daza-Caicedo, Sandra; Maldonado, Oscar; Arboleda-Castrillón, Tania; Falla, Sigrid; Moreno, Pablo; Tafur-Sequera, Mayali; Papagayo, Diana

2017-01-01

We propose a set of qualitative indicators for monitoring practices of social appropriation of science and technology. The design of this set is based on the Maloka case, but it can be of use to multiple actors involved in the social appropriation of science and technology (referred to by its Spanish acronym, ASCyT). The introduction discusses the concept of ASCyT. The first section provides a review of the literature about measuring activities that link science and society. The second section explains why it is important to develop this type of measurement. The third section lays out the methodology used in designing the indicators. The fourth section explains the set of indicators and the fifth reflects on that process.

Calibration of the Geostationary Imaging Fourier Transform Spectrometer (GIFTS)

NASA Technical Reports Server (NTRS)

Best, F. A.; Revercomb, H. E.; Bingham, G. E.; Knuteson, R. O.; Tobin, D. C.; LaPorte, D. D.; Smith, W. L.

2001-01-01

The NASA New Millennium Program's Geostationary Imaging Fourier Transform Spectrometer (GIFTS) requires highly accurate radiometric and spectral calibration in order to carry out its mission to provide water vapor, wind, temperature, and trace gas profiling from geostationary orbit. A calibration concept has been developed for the GIFTS Phase A instrument design. The in-flight calibration is performed using views of two on-board blackbody sources along with cold space. A radiometric calibration uncertainty analysis has been developed and used to show that the expected performance for GIFTS exceeds its top level requirement to measure brightness temperature to better than 1 K. For the Phase A GIFTS design, the spectral calibration is established by the highly stable diode laser used as the reference for interferogram sampling, and verified with comparisons to atmospheric calculations.

Modelling the infrared ManPAD Track Angle Bias missile countermeasure

NASA Astrophysics Data System (ADS)

Birchenall, Richard Peter; Richardson, Mark A.; Butters, Brian; Walmsley, Roy

2011-09-01

The paper describes the concept of missile evolution and the development of a range of missile advancements designed to defeat the evolving array of aircraft defensive measures. The paper describes a typical military aircraft infrared signature and looks at how examination of different spectral parts of the target signature can be used to determine if an aircraft has deployed flare countermeasures. This information can then be used to trigger a missile countermeasure in attempt for the missile to continue with a successful engagement. The paper examines the Track Angle Bias missile countermeasure and details the results of over 1000 engagement simulations designed to test the effectiveness of the missile countermeasure. The paper references the work published in IRPT Volume 53, Issue 5, September 2010, Pages 372-380.

Evaluation of the feasibility and viability of modular pumped storage hydro (m-PSH) in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Witt, Adam M.; Hadjerioua, Boualem; Martinez, Rocio

The viability of modular pumped storage hydro (m-PSH) is examined in detail through the conceptual design, cost scoping, and economic analysis of three case studies. Modular PSH refers to both the compactness of the project design and the proposed nature of product fabrication and performance. A modular project is assumed to consist of pre-fabricated standardized components and equipment, tested and assembled into modules before arrival on site. This technology strategy could enable m-PSH projects to deploy with less substantial civil construction and equipment component costs. The concept of m-PSH is technically feasible using currently available conventional pumping and turbine equipment,more » and may offer a path to reducing the project development cycle from inception to commissioning.« less

The development of STS payload environmental engineering standards

NASA Technical Reports Server (NTRS)

Bangs, W. F.

1982-01-01

The presently reported effort to provide a single set of standards for the design, analysis and testing of Space Transportation System (STS) payloads throughout the NASA organization must be viewed as essentially experimental, since the concept of incorporating the diverse opinions and experiences of several separate field research centers may in retrospect be judged too ambitious or perhaps even naive. While each STS payload may have unique characteristics, and the project should formulate its own criteria for environmental design, testing and evaluation, a reference source document providing coordinated standards is expected to minimize the duplication of effort and limit random divergence of practices among the various NASA payload programs. These standards would provide useful information to all potential STS users, and offer a degree of standardization to STS users outside the NASA organization.

Line-scan spectrum-encoded imaging by dual-comb interferometry.

PubMed

Wang, Chao; Deng, Zejiang; Gu, Chenglin; Liu, Yang; Luo, Daping; Zhu, Zhiwei; Li, Wenxue; Zeng, Heping

2018-04-01

Herein, the method of spectrum-encoded dual-comb interferometry is introduced to measure a three-dimensional (3-D) profile with absolute distance information. By combining spectral encoding for wavelength-to-space mapping, dual-comb interferometry for decoding and optical reference for calibration, this system can obtain a 3-D profile of an object at a stand-off distance of 114 mm with a depth precision of 12 μm. With the help of the reference arm, the absolute distance, reflectivity distribution, and depth information are simultaneously measured at a 5 kHz line-scan rate with free-running carrier-envelope offset frequencies. To verify the concept, experiments are conducted with multiple objects, including a resolution test chart, a three-stair structure, and a designed "ECNU" letter chain. The results show a horizontal resolution of ∼22  μm and a measurement range of 1.93 mm.

Data mining and visualization of average images in a digital hand atlas

NASA Astrophysics Data System (ADS)

Zhang, Aifeng; Gertych, Arkadiusz; Liu, Brent J.; Huang, H. K.

2005-04-01

We have collected a digital hand atlas containing digitized left hand radiographs of normally developed children grouped accordingly by age, sex, and race. A set of features stored in a database reflecting patient's stage of skeletal development has been calculated by automatic image processing procedures. This paper addresses a new concept, "average" image in the digital hand atlas. The "average" reference image in the digital atlas is selected for each of the groups of normal developed children with the best representative skeletal maturity based on bony features. A data mining procedure was designed and applied to find the average image through average feature vector matching. It also provides a temporary solution for the missing feature problem through polynomial regression. As more cases are added to the digital hand atlas, it can grow to provide clinicians accurate reference images to aid the bone age assessment process.

Advances in Degradable Embolic Microspheres: A State of the Art Review

PubMed Central

Doucet, Jensen; Kiri, Lauren; O’Connell, Kathleen; Kehoe, Sharon; Lewandowski, Robert J.; Liu, David M.; Abraham, Robert J.; Boyd, Daniel

2018-01-01

Considerable efforts have been placed on the development of degradable microspheres for use in transarterial embolization indications. Using the guidance of the U.S. Food and Drug Administration (FDA) special controls document for the preclinical evaluation of vascular embolization devices, this review consolidates all relevant data pertaining to novel degradable microsphere technologies for bland embolization into a single reference. This review emphasizes intended use, chemical composition, degradative mechanisms, and pre-clinical safety, efficacy, and performance, while summarizing the key advantages and disadvantages for each degradable technology that is currently under development for transarterial embolization. This review is intended to provide an inclusive reference for clinicians that may facilitate an understanding of clinical and technical concepts related to this field of interventional radiology. For materials scientists, this review highlights innovative devices and current evaluation methodologies (i.e., preclinical models), and is designed to be instructive in the development of innovative/new technologies and evaluation methodologies. PMID:29373510

A comparative analysis of the density of the SNOMED CT conceptual content for semantic harmonization

PubMed Central

He, Zhe; Geller, James; Chen, Yan

2015-01-01

Objectives Medical terminologies vary in the amount of concept information (the “density”) represented, even in the same sub-domains. This causes problems in terminology mapping, semantic harmonization and terminology integration. Moreover, complex clinical scenarios need to be encoded by a medical terminology with comprehensive content. SNOMED Clinical Terms (SNOMED CT), a leading clinical terminology, was reported to lack concepts and synonyms, problems that cannot be fully alleviated by using post-coordination. Therefore, a scalable solution is needed to enrich the conceptual content of SNOMED CT. We are developing a structure-based, algorithmic method to identify potential concepts for enriching the conceptual content of SNOMED CT and to support semantic harmonization of SNOMED CT with selected other Unified Medical Language System (UMLS) terminologies. Methods We first identified a subset of English terminologies in the UMLS that have ‘PAR’ relationship labeled with ‘IS_A’ and over 10% overlap with one or more of the 19 hierarchies of SNOMED CT. We call these “reference terminologies” and we note that our use of this name is different from the standard use. Next, we defined a set of topological patterns across pairs of terminologies, with SNOMED CT being one terminology in each pair and the other being one of the reference terminologies. We then explored how often these topological patterns appear between SNOMED CT and each reference terminology, and how to interpret them. Results Four viable reference terminologies were identified. Large density differences between terminologies were found. Expected interpretations of these differences were indeed observed, as follows. A random sample of 299 instances of special topological patterns (“2:3 and 3:2 trapezoids”) showed that 39.1% and 59.5% of analyzed concepts in SNOMED CT and in a reference terminology, respectively, were deemed to be alternative classifications of the same conceptual content. In 30.5% and 17.6% of the cases, it was found that intermediate concepts could be imported into SNOMED CT or into the reference terminology, respectively, to enhance their conceptual content, if approved by a human curator. Other cases included synonymy and errors in one of the terminologies. Conclusion These results show that structure-based algorithmic methods can be used to identify potential concepts to enrich SNOMED CT and the four reference terminologies. The comparative analysis has the future potential of supporting terminology authoring by suggesting new content to improve content coverage and semantic harmonization between terminologies. PMID:25890688

Clinical Impact Research – how to choose experimental or observational intervention study?

PubMed Central

Malmivaara, Antti

2016-01-01

Abstract Background: Interventions directed to individuals by health and social care systems should increase health and welfare of patients and customers. Aims: This paper aims to present and define a new concept Clinical Impact Research (CIR) and suggest which study design, either randomized controlled trial (RCT) (experimental) or benchmarking controlled trial (BCT) (observational) is recommendable and to consider the feasibility, validity, and generalizability issues in CIR. Methods: The new concept is based on a narrative review of the literature and on author’s idea that in intervention studies, there is a need to cover comprehensively all the main impact categories and their respective outcomes. The considerations on how to choose the most appropriate study design (RCT or BCT) were based on previous methodological studies on RCTs and BCTs and on author’s previous work on the concepts benchmarking controlled trial and system impact research (SIR). Results: The CIR covers all studies aiming to assess the impact for health and welfare of any health (and integrated social) care or public health intervention directed to an individual. The impact categories are accessibility, quality, equality, effectiveness, safety, and efficiency. Impact is the main concept, and within each impact category, both generic- and context-specific outcome measures are needed. CIR uses RCTs and BCTs. Conclusions: CIR should be given a high priority in medical, health care, and health economic research. Clinicians and leaders at all levels of health care can exploit the evidence from CIR. Key messagesThe new concept of Clinical Impact Research (CIR) is defined as a research field aiming to assess what are the impacts of healthcare and public health interventions targeted to patients or individuals.The term impact refers to all effects caused by the interventions, with particular emphasis on accessibility, quality, equality, effectiveness, safety, and efficiency. CIR uses two study designs: randomized controlled trials (RCTs) (experimental) and benchmarking controlled trials (BCTs) (observational). Suggestions on how to choose between RCT and BCT as the most suitable study design are presented.Simple way of determining the study question in CIR based on the PICO (patient, intervention, control intervention, outcome) framework is presented.CIR creates the scientific basis for clinical decisions. Clinicians and leaders at all levels of health care and those working for public health can use the evidence from CIR for the benefit of patients and the population. PMID:27494394

Clinical Impact Research - how to choose experimental or observational intervention study?

PubMed

Malmivaara, Antti

2016-11-01

Interventions directed to individuals by health and social care systems should increase health and welfare of patients and customers. This paper aims to present and define a new concept Clinical Impact Research (CIR) and suggest which study design, either randomized controlled trial (RCT) (experimental) or benchmarking controlled trial (BCT) (observational) is recommendable and to consider the feasibility, validity, and generalizability issues in CIR. The new concept is based on a narrative review of the literature and on author's idea that in intervention studies, there is a need to cover comprehensively all the main impact categories and their respective outcomes. The considerations on how to choose the most appropriate study design (RCT or BCT) were based on previous methodological studies on RCTs and BCTs and on author's previous work on the concepts benchmarking controlled trial and system impact research (SIR). The CIR covers all studies aiming to assess the impact for health and welfare of any health (and integrated social) care or public health intervention directed to an individual. The impact categories are accessibility, quality, equality, effectiveness, safety, and efficiency. Impact is the main concept, and within each impact category, both generic- and context-specific outcome measures are needed. CIR uses RCTs and BCTs. CIR should be given a high priority in medical, health care, and health economic research. Clinicians and leaders at all levels of health care can exploit the evidence from CIR. Key messages The new concept of Clinical Impact Research (CIR) is defined as a research field aiming to assess what are the impacts of healthcare and public health interventions targeted to patients or individuals. The term impact refers to all effects caused by the interventions, with particular emphasis on accessibility, quality, equality, effectiveness, safety, and efficiency. CIR uses two study designs: randomized controlled trials (RCTs) (experimental) and benchmarking controlled trials (BCTs) (observational). Suggestions on how to choose between RCT and BCT as the most suitable study design are presented. Simple way of determining the study question in CIR based on the PICO (patient, intervention, control intervention, outcome) framework is presented. CIR creates the scientific basis for clinical decisions. Clinicians and leaders at all levels of health care and those working for public health can use the evidence from CIR for the benefit of patients and the population.

Marketing Reference Services.

ERIC Educational Resources Information Center

Norman, O. Gene

1995-01-01

Relates the marketing concept to library reference services. Highlights include a review of the literature and an overview of marketing, including research, the marketing mix, strategic plan, marketing plan, and marketing audit. Marketing principles are applied to reference services through the marketing mix elements of product, price, place, and…

Art Education and the Development of Self-Concept.

ERIC Educational Resources Information Center

Hausman, Jerome J.

References are often made in art education literature about how art can enhance individuals' self-concepts. This document discusses the work of authors, Manuel Barkan, George Herbert Mead, and Sigmund Freud, who support this concept. Barkan's theory concerning how an individual's personality develops and changes by interacting socially is…

Marginalization and School Nursing

ERIC Educational Resources Information Center

Smith, Julia Ann

2004-01-01

The concept of marginalization was first analyzed by nursing researchers Hall, Stevens, and Meleis. Although nursing literature frequently refers to this concept when addressing "at risk" groups such as the homeless, gays and lesbians, and those infected with HIV/AIDS, the concept can also be applied to nursing. Analysis of current school nursing…

The Influence of a Collaborative Learning Environment on Primary Students' Conceptions about Acid Rain.

ERIC Educational Resources Information Center

Marinopoulos, Dimitrios; Stavridou, Heleni

2002-01-01

Investigates primary students' conceptions of acid rain formation and its consequences to people and the environment before and after a 10-hour constructivist teaching intervention. Reports improvement in conceptions of physical and chemical phenomena among the experimental group participants. (Contains 23 references.) (Author/YDS)

Relationships between Prospective Elementary Teachers' Classroom Practice and Their Conceptions of Biology and of Teaching Science.

ERIC Educational Resources Information Center

Meyer, Helen; Tabachnick, B. Robert; Hewson, Peter W.; Lemberger, John; Park, Hyun-Ju

1999-01-01

Discusses three prospective elementary teachers' conceptions of teaching science and selected portions of their knowledge base in life science. Explores how these teachers' conceptions, along with their teaching actions, developed during the course of a teacher-education program. Contains 21 references. (Author/WRM)

Altair Lunar Lander Development Status: Enabling Human Lunar Exploration

NASA Technical Reports Server (NTRS)

Laurini, Kathleen C.; Connolly, John F.

2009-01-01

As a critical part of the NASA Constellation Program lunar transportation architecture, the Altair lunar lander will return humans to the moon and enable a sustained program of lunar exploration. The Altair is to deliver up to four crew to the surface of the moon and return them to low lunar orbit at the completion of their mission. Altair will also be used to deliver large cargo elements to the lunar surface, enabling the buildup of an outpost. The Altair Project initialized its design using a minimum functionality approach that identified critical functionality required to meet a minimum set of Altair requirements. The Altair team then performed several analysis cycles using risk-informed design to selectively add back components and functionality to increase the vehicles safety and reliability. The analysis cycle results were captured in a reference Altair design. This design was reviewed at the Constellation Lunar Capabilities Concept Review, a Mission Concept Review, where key driving requirements were confirmed and the Altair Project was given authorization to begin Phase A project formulation. A key objective of Phase A is to revisit the Altair vehicle configuration, to better optimize it to complete its broad range of crew and cargo delivery missions. Industry was invited to partner with NASA early in the design to provide their insights regarding Altair configuration and key engineering challenges. A blended NASA-industry team will continue to refine the lander configuration and mature the vehicle design over the next few years. This paper will update the international community on the status of the Altair Project as it addresses the challenges of project formulation, including optimizing a vehicle configuration based on the work of the NASA Altair Project team, industry inputs and the plans going forward in designing the Altair lunar lander.