A Comparison of Simple Methods to Incorporate Material Temperature Dependency in the Green's Function Method for Estimating Transient Thermal Stresses in Thick-Walled Power Plant Components.

PubMed

Rouse, James; Hyde, Christopher

2016-01-06

The threat of thermal fatigue is an increasing concern for thermal power plant operators due to the increasing tendency to adopt "two-shifting" operating procedures. Thermal plants are likely to remain part of the energy portfolio for the foreseeable future and are under societal pressures to generate in a highly flexible and efficient manner. The Green's function method offers a flexible approach to determine reference elastic solutions for transient thermal stress problems. In order to simplify integration, it is often assumed that Green's functions (derived from finite element unit temperature step solutions) are temperature independent (this is not the case due to the temperature dependency of material parameters). The present work offers a simple method to approximate a material's temperature dependency using multiple reference unit solutions and an interpolation procedure. Thermal stress histories are predicted and compared for realistic temperature cycles using distinct techniques. The proposed interpolation method generally performs as well as (if not better) than the optimum single Green's function or the previously-suggested weighting function technique (particularly for large temperature increments). Coefficients of determination are typically above 0 . 96 , and peak stress differences between true and predicted datasets are always less than 10 MPa.

Creep relaxation of fuel pin bending and ovalling stresses. [BEND code, OVAL code, MARC-CDC code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chan, D.P.; Jackson, R.J.

1981-10-01

Analytical methods for calculating fuel pin cladding bending and ovalling stresses due to pin bundle-duct mechanical interaction taking into account nonlinear creep are presented. Calculated results are in agreement with finite element results by MARC-CDC program. The methods are used to investigate the effect of creep on the FTR fuel cladding bending and ovalling stresses. It is concluded that the cladding of 316 SS 20 percent CW and reference design has high creep rates in the FTR core region to keep the bending and ovalling stresses to acceptable levels. 6 refs.

(BARS) -- Bibliographic Retrieval System Sandia Shock Compression (SSC) database Shock Physics Index (SPHINX) database. Volume 1: UNIX version query guide customized application for INGRES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herrmann, W.; von Laven, G.M.; Parker, T.

1993-09-01

The Bibliographic Retrieval System (BARS) is a data base management system specially designed to retrieve bibliographic references. Two databases are available, (i) the Sandia Shock Compression (SSC) database which contains over 5700 references to the literature related to stress waves in solids and their applications, and (ii) the Shock Physics Index (SPHINX) which includes over 8000 further references to stress waves in solids, material properties at intermediate and low rates, ballistic and hypervelocity impact, and explosive or shock fabrication methods. There is some overlap in the information in the two data bases.

Selection of appropriate reference genes for the detection of rhythmic gene expression via quantitative real-time PCR in Tibetan hulless barley.

PubMed

Cai, Jing; Li, Pengfei; Luo, Xiao; Chang, Tianliang; Li, Jiaxing; Zhao, Yuwei; Xu, Yao

2018-01-01

Hulless barley (Hordeum vulgare L. var. nudum. hook. f.) has been cultivated as a major crop in the Qinghai-Tibet plateau of China for thousands of years. Compared to other cereal crops, the Tibetan hulless barley has developed stronger endogenous resistances to survive in the severe environment of its habitat. To understand the unique resistant mechanisms of this plant, detailed genetic studies need to be performed. The quantitative real-time reverse transcription-polymerase chain reaction (qRT-PCR) is the most commonly used method in detecting gene expression. However, the selection of stable reference genes under limited experimental conditions was considered to be an essential step for obtaining accurate results in qRT-PCR. In this study, 10 candidate reference genes-ACT (Actin), E2 (Ubiquitin conjugating enzyme 2), TUBα (Alpha-tubulin), TUBβ6 (Beta-tubulin 6), GAPDH (Glyceraldehyde 3-phosphate dehydrogenase), EF-1α (Elongation factor 1-alpha), SAMDC (S-adenosylmethionine decarboxylase), PKABA1 (Gene for protein kinase HvPKABA1), PGK (Phosphoglycerate kinase), and HSP90 (Heat shock protein 90)-were selected from the NCBI gene database of barley. Following qRT-PCR amplifications of all candidate reference genes in Tibetan hulless barley seedlings under various stressed conditions, the stabilities of these candidates were analyzed by three individual software packages including geNorm, NormFinder, and BestKeeper. The results demonstrated that TUBβ6, E2, TUBα, and HSP90 were generally the most suitable sets under all tested conditions; similarly, TUBα and HSP90 showed peak stability under salt stress, TUBα and EF-1α were the most suitable reference genes under cold stress, and ACT and E2 were the most stable under drought stress. Finally, a known circadian gene CCA1 was used to verify the service ability of chosen reference genes. The results confirmed that all recommended reference genes by the three software were suitable for gene expression analysis under tested stress conditions by the qRT-PCR method.

CoFe-microwires with stress-dependent magnetostriction as embedded sensing elements

NASA Astrophysics Data System (ADS)

Salem, M. M.; Nematov, M. G.; Uddin, A.; Panina, L. V.; Churyukanova, M. N.; Marchenko, A. T.

2017-10-01

Testing internal stress/strain condition of polymer composite materials is of high importance in structural health monitoring. We are presenting here a new method of monitoring internal stresses. The method can be referred to as embedded sensing technique, where the sensing element is a glass-coated ferromagnetic microwire with a specific magnetic anisotropy and stress-dependent magnetostriction. When the microwire is remagnetized the sharp voltage is induced which is characterized by high frequency harmonics. The amplitude of these harmonics sensitively depends on various stresses. The microwire of composition Co71Fe5B11Si10Cr3 with the metallic core diameter of 22.8 μm show abrupt transformation of the magnetization process under applied tensile stress owing to the stress-dependent magnetostriction.

Catheter Insertion Reference Trajectory Construction Method Using Photoelastic Stress Analysis for Quantification of Respect for Tissue During Endovascular Surgery Simulation

NASA Astrophysics Data System (ADS)

Tercero, Carlos; Ikeda, Seiichi; Fukuda, Toshio; Arai, Fumihito; Negoro, Makoto; Takahashi, Ikuo

2011-10-01

There is a need to develop quantitative evaluation for simulator based training in medicine. Photoelastic stress analysis can be used in human tissue modeling materials; this enables the development of simulators that measure respect for tissue. For applying this to endovascular surgery, first we present a model of saccular aneurism where stress variation during micro-coils deployment is measured, and then relying on a bi-planar vision system we measure a catheter trajectory and compare it to a reference trajectory considering respect for tissue. New photoelastic tissue modeling materials will expand the applications of this technology to other medical training domains.

Traumatic Stress Symptoms and Breast Cancer: The Role of Childhood Abuse

ERIC Educational Resources Information Center

Goldsmith, Rachel E.; Jandorf, Lina; Valdimarsdottir, Heiddis; Amend, Kandace L.; Stoudt, Brett G.; Rini, Christine; Hershman, Dawn; Neugut, Alfred; Reilly, James J.; Tartter, Paul I.; Feldman, Sheldon M.; Ambrosone, Christine B.; Bovbjerg, Dana H.

2010-01-01

Objective: The present study investigated relations between reported childhood abuse and recent traumatic stress symptoms in women newly diagnosed with breast cancer (n = 330). Methods: As part of a larger ongoing study, patients from eight public and private hospitals were referred by their physicians and completed the Childhood Trauma…

Identification of Reference Genes for Quantitative Real-Time PCR in Date Palm (Phoenix dactylifera L.) Subjected to Drought and Salinity.

PubMed

V Patankar, Himanshu; M Assaha, Dekoum V; Al-Yahyai, Rashid; Sunkar, Ramanjulu; Yaish, Mahmoud W

2016-01-01

Date palm is an important crop plant in the arid and semi-arid regions supporting human population in the Middle East and North Africa. These areas have been largely affected by drought and salinity due to insufficient rainfall and improper irrigation practices. Date palm is a relatively salt- and drought-tolerant plant and more recently efforts have been directed to identifying genes and pathways that confer stress tolerance in this species. Quantitative real-time PCR (qPCR) is a promising technique for the analysis of stress-induced differential gene expression, which involves the use of stable reference genes for normalizing gene expression. In an attempt to find the best reference genes for date palm's drought and salinity research, we evaluated the stability of 12 most commonly used reference genes using the geNorm, NormFinder, BestKeeper statistical algorithms and the comparative ΔCT method. The comprehensive results revealed that HEAT SHOCK PROTEIN (HSP), UBIQUITIN (UBQ) and YTH domain-containing family protein (YT521) were stable in drought-stressed leaves whereas GLYCERALDEHYDE-3-PHOSPHATE DEHYDROGENASE (GAPDH), ACTIN and TUBULIN were stable in drought-stressed roots. On the other hand, SMALL SUBUNIT RIBOSOMAL RNA (25S), YT521 and 18S ribosomal RNA (18S); and UBQ, ACTIN and ELONGATION FACTOR 1-ALPHA (eEF1a) were stable in leaves and roots, respectively, under salt stress. The stability of these reference genes was verified by using the abiotic stress-responsive CYTOSOLIC Cu/Zn SUPEROXIDE DISMUTASE (Cyt-Cu/Zn SOD), an ABA RECEPTOR, and a PROLINE TRANSPORTER 2 (PRO) genes. A combination of top 2 or 3 stable reference genes were found to be suitable for normalization of the target gene expression and will facilitate gene expression analysis studies aimed at identifying functional genes associated with drought and salinity tolerance in date palm.

Identification of Reference Genes for Normalizing Quantitative Real-Time PCR in Urechis unicinctus

NASA Astrophysics Data System (ADS)

Bai, Yajiao; Zhou, Di; Wei, Maokai; Xie, Yueyang; Gao, Beibei; Qin, Zhenkui; Zhang, Zhifeng

2018-06-01

The reverse transcription quantitative real-time PCR (RT-qPCR) has become one of the most important techniques of studying gene expression. A set of valid reference genes are essential for the accurate normalization of data. In this study, five candidate genes were analyzed with geNorm, NormFinder, BestKeeper and ΔCt methods to identify the genes stably expressed in echiuran Urechis unicinctus, an important commercial marine benthic worm, under abiotic (sulfide stress) and normal (adult tissues, embryos and larvae at different development stages) conditions. The comprehensive results indicated that the expression of TBP was the most stable at sulfide stress and in developmental process, while the expression of EF- 1- α was the most stable at sulfide stress and in various tissues. TBP and EF- 1- α were recommended as a suitable reference gene combination to accurately normalize the expression of target genes at sulfide stress; and EF- 1- α, TBP and TUB were considered as a potential reference gene combination for normalizing the expression of target genes in different tissues. No suitable gene combination was obtained among these five candidate genes for normalizing the expression of target genes for developmental process of U. unicinctus. Our results provided a valuable support for quantifying gene expression using RT-qPCR in U. unicinctus.

English Listeners Use Suprasegmental Cues to Lexical Stress Early during Spoken-Word Recognition

ERIC Educational Resources Information Center

Jesse, Alexandra; Poellmann, Katja; Kong, Ying-Yee

2017-01-01

Purpose: We used an eye-tracking technique to investigate whether English listeners use suprasegmental information about lexical stress to speed up the recognition of spoken words in English. Method: In a visual world paradigm, 24 young English listeners followed spoken instructions to choose 1 of 4 printed referents on a computer screen (e.g.,…

Reference Gene Selection for Quantitative Real-Time Reverse-Transcriptase PCR in Annual Ryegrass (Lolium multiflorum) Subjected to Various Abiotic Stresses.

PubMed

Liu, Qiuxu; Qi, Xiao; Yan, Haidong; Huang, Linkai; Nie, Gang; Zhang, Xinquan

2018-01-16

To select the most stable reference genes in annual ryegrass ( Lolium multiflorum ), we studied annual ryegrass leaf tissues exposed to various abiotic stresses by qRT-PCR and selected 11 candidate reference genes, i.e., 18S rRNA, E2, GAPDH, eIF4A, HIS3, SAMDC, TBP-1, Unigene71, Unigene77, Unigene755, and Unigene14912. We then used GeNorm, NormFinder, and BestKeeper to analyze the expression stability of these 11 genes, and used RefFinder to comprehensively rank genes according to stability. Under different stress conditions, the most suitable reference genes for studies of leaf tissues of annual ryegrass were different. The expression of the eIF4A gene was the most stable under drought stress. Under saline-alkali stress, Unigene14912 has the highest expression stability. Under acidic aluminum stress, SAMDC expression stability was highest. Under heavy metal stress, Unigene71 expression had the highest stability. According to the software analyses, Unigene14912, HIS3, and eIF4A were the most suitable for analyses of abiotic stress in tissues of annual ryegrass. GAPDH was the least suitable reference gene. In conclusion, selecting appropriate reference genes under abiotic stress not only improves the accuracy of annual ryegrass gene expression analyses, but also provides a theoretical reference for the development of reference genes in plants of the genus Lolium .

Astronautic structures manual

NASA Technical Reports Server (NTRS)

1977-01-01

Three-volume reference work serves as catalog of analysis techniques for elastic and inelastic stress ranges and as source on background and development of methods. Information is condensation of published journal articles, industry and university publications, textbooks, and government documents.

Prevalence of stress references on college freshmen Facebook profiles.

PubMed

Egan, Katie G; Moreno, Megan A

2011-10-01

Stress is common among college students and associated with adverse health outcomes. This study used the social networking Web site Facebook to identify self-reported stress and associated conditions among college students. Public Facebook profiles of undergraduate freshman at a large Midwestern State University (n = 300) were identified using a Facebook search. Content analysis of Facebook profiles included demographic information and displayed references to stress, weight concerns, depressive symptoms, and alcohol. The mean reported age was 18.4 years, and the majority of profile owners were female (62%). Stress references were displayed on 37% of the profiles, weight concerns on 6%, depressive symptoms on 24%, and alcohol on 73%. The display of stress references was associated with female sex (odds ratio [OR], 2.81; confidence interval [CI], 1.7-4.7), weight concerns (OR, 5.36; CI, 1.87-15.34), and depressive symptoms (OR, 2.7; CI, 1.57-4.63). No associations were found between stress and alcohol references. College freshmen frequently display references to stress on Facebook profiles with prevalence rates similar to self-reported national survey data. Findings suggest a positive association between referencing stress and both weight concerns and depressive symptoms. Facebook may be a useful venue to identify students at risk for stress-related conditions and to disseminate information about campus resources to these students.

Ecological comparison of cellular stress responses among populations - normalizing RT-qPCR values to investigate differential environmental adaptations.

PubMed

Koenigstein, Stefan; Pöhlmann, Kevin; Held, Christoph; Abele, Doris

2013-05-16

Rising temperatures and other environmental factors influenced by global climate change can cause increased physiological stress for many species and lead to range shifts or regional population extinctions. To advance the understanding of species' response to change and establish links between individual and ecosystem adaptations, physiological reactions have to be compared between populations living in different environments. Although changes in expression of stress genes are relatively easy to quantify, methods for reliable comparison of the data remain a contentious issue. Using normalization algorithms and further methodological considerations, we compare cellular stress response gene expression levels measured by RT-qPCR after air exposure experiments among different subpopulations of three species of the intertidal limpet Nacella. Reference gene assessment algorithms reveal that stable reference genes can differ among investigated populations and / or treatment groups. Normalized expression values point to differential defense strategies to air exposure in the investigated populations, which either employ a pronounced cellular stress response in the inducible Hsp70 forms, or exhibit a comparatively high constitutive expression of Hsps (heat shock proteins) while showing only little response in terms of Hsp induction. This study serves as a case study to explore the methodological prerequisites of physiological stress response comparisons among ecologically and phylogenetically different organisms. To improve the reliability of gene expression data and compare the stress responses of subpopulations under potential genetic divergence, reference gene stability algorithms are valuable and necessary tools. As the Hsp70 isoforms have been shown to play different roles in the acute stress responses and increased constitutive defenses of populations in their different habitats, these comparative studies can yield insight into physiological strategies of adaptation to environmental stress and provide hints for the prudent use of the cellular stress response as a biomarker to study environmental stress and stress adaptation of populations under changing environmental conditions.

Ecological comparison of cellular stress responses among populations – normalizing RT-qPCR values to investigate differential environmental adaptations

PubMed Central

2013-01-01

Background Rising temperatures and other environmental factors influenced by global climate change can cause increased physiological stress for many species and lead to range shifts or regional population extinctions. To advance the understanding of species’ response to change and establish links between individual and ecosystem adaptations, physiological reactions have to be compared between populations living in different environments. Although changes in expression of stress genes are relatively easy to quantify, methods for reliable comparison of the data remain a contentious issue. Using normalization algorithms and further methodological considerations, we compare cellular stress response gene expression levels measured by RT-qPCR after air exposure experiments among different subpopulations of three species of the intertidal limpet Nacella. Results Reference gene assessment algorithms reveal that stable reference genes can differ among investigated populations and / or treatment groups. Normalized expression values point to differential defense strategies to air exposure in the investigated populations, which either employ a pronounced cellular stress response in the inducible Hsp70 forms, or exhibit a comparatively high constitutive expression of Hsps (heat shock proteins) while showing only little response in terms of Hsp induction. Conclusions This study serves as a case study to explore the methodological prerequisites of physiological stress response comparisons among ecologically and phylogenetically different organisms. To improve the reliability of gene expression data and compare the stress responses of subpopulations under potential genetic divergence, reference gene stability algorithms are valuable and necessary tools. As the Hsp70 isoforms have been shown to play different roles in the acute stress responses and increased constitutive defenses of populations in their different habitats, these comparative studies can yield insight into physiological strategies of adaptation to environmental stress and provide hints for the prudent use of the cellular stress response as a biomarker to study environmental stress and stress adaptation of populations under changing environmental conditions. PMID:23680017

Methods of Coping with Stress: A Taxonomy

DTIC Science & Technology

1992-03-01

hypnosis (Feuerstein, Labbe, & Kuczmierczyk, 1986)), as well as more recent additions such as acupuncture (Hanson, 1989). Where, with a minimum of...phone index. REFERENCE: Hanson, 1989 #: 33 NAME: LEFT-BRAIN STIMULATION DEFINITION: Stimulating intellect and memory , e. g., in learning to play an...progressive muscle relaxation and hypnosis , leading to the control of the level of arousal in the body, binging on a restful, peaceful state. REFERENCE

Evaluation of Reference Genes for Normalization of Gene Expression Using Quantitative RT-PCR under Aluminum, Cadmium, and Heat Stresses in Soybean.

PubMed

Gao, Mengmeng; Liu, Yaping; Ma, Xiao; Shuai, Qin; Gai, Junyi; Li, Yan

2017-01-01

Quantitative reverse transcription polymerase chain reaction (qRT-PCR) is widely used to analyze the relative gene expression level, however, the accuracy of qRT-PCR is greatly affected by the stability of reference genes, which is tissue- and environment- dependent. Therefore, choosing the most stable reference gene in a specific tissue and environment is critical to interpret gene expression patterns. Aluminum (Al), cadmium (Cd), and heat stresses are three important abiotic factors limiting soybean (Glycine max) production in southern China. To identify the suitable reference genes for normalizing the expression levels of target genes by qRT-PCR in soybean response to Al, Cd and heat stresses, we studied the expression stability of ten commonly used housekeeping genes in soybean roots and leaves under these three abiotic stresses, using five approaches, BestKeeper, Delta Ct, geNorm, NormFinder and RefFinder. We found TUA4 is the most stable reference gene in soybean root tips under Al stress. Under Cd stress, Fbox and UKN2 are the most stable reference genes in roots and leaves, respectively, while 60S is the most suitable reference gene when analyzing both roots and leaves together. For heat stress, TUA4 and UKN2 are the most stable housekeeping genes in roots and leaves, respectively, and UKN2 is the best reference gene for analysis of roots and leaves together. To validate the reference genes, we quantified the relative expression levels of six target genes that were involved in soybean response to Al, Cd or heat stresses, respectively. The expression patterns of these target genes differed between using the most and least stable reference genes, suggesting the selection of a suitable reference gene is critical for gene expression studies.

Selection of relatively exact reference genes for gene expression studies in goosegrass (Eleusine indica) under herbicide stress.

PubMed

Chen, Jingchao; Huang, Zhaofeng; Huang, Hongjuan; Wei, Shouhui; Liu, Yan; Jiang, Cuilan; Zhang, Jie; Zhang, Chaoxian

2017-04-21

Goosegrass (Eleusine indica) is one of the most serious annual grassy weeds worldwide, and its evolved herbicide-resistant populations are more difficult to control. Quantitative real-time PCR (qPCR) is a common technique for investigating the resistance mechanism; however, there is as yet no report on the systematic selection of stable reference genes for goosegrass. This study proposed to test the expression stability of 9 candidate reference genes in goosegrass in different tissues and developmental stages and under stress from three types of herbicide. The results show that for different developmental stages and organs (control), eukaryotic initiation factor 4 A (eIF-4) is the most stable reference gene. Chloroplast acetolactate synthase (ALS) is the most stable reference gene under glyphosate stress. Under glufosinate stress, eIF-4 is the best reference gene. Ubiquitin-conjugating enzyme (UCE) is the most stable reference gene under quizalofop-p-ethyl stress. The gene eIF-4 is the recommended reference gene for goosegrass under the stress of all three herbicides. Moreover, pairwise analysis showed that seven reference genes were sufficient to normalize the gene expression data under three herbicides treatment. This study provides a list of reliable reference genes for transcript normalization in goosegrass, which will facilitate resistance mechanism studies in this weed species.

Suitable Reference Genes for Accurate Gene Expression Analysis in Parsley (Petroselinum crispum) for Abiotic Stresses and Hormone Stimuli

PubMed Central

Li, Meng-Yao; Song, Xiong; Wang, Feng; Xiong, Ai-Sheng

2016-01-01

Parsley, one of the most important vegetables in the Apiaceae family, is widely used in the food, medicinal, and cosmetic industries. Recent studies on parsley mainly focus on its chemical composition, and further research involving the analysis of the plant's gene functions and expressions is required. qPCR is a powerful method for detecting very low quantities of target transcript levels and is widely used to study gene expression. To ensure the accuracy of results, a suitable reference gene is necessary for expression normalization. In this study, four software, namely geNorm, NormFinder, BestKeeper, and RefFinder were used to evaluate the expression stabilities of eight candidate reference genes of parsley (GAPDH, ACTIN, eIF-4α, SAND, UBC, TIP41, EF-1α, and TUB) under various conditions, including abiotic stresses (heat, cold, salt, and drought) and hormone stimuli treatments (GA, SA, MeJA, and ABA). Results showed that EF-1α and TUB were the most stable genes for abiotic stresses, whereas EF-1α, GAPDH, and TUB were the top three choices for hormone stimuli treatments. Moreover, EF-1α and TUB were the most stable reference genes among all tested samples, and UBC was the least stable one. Expression analysis of PcDREB1 and PcDREB2 further verified that the selected stable reference genes were suitable for gene expression normalization. This study can guide the selection of suitable reference genes in gene expression in parsley. PMID:27746803

Suitable Reference Genes for Accurate Gene Expression Analysis in Parsley (Petroselinum crispum) for Abiotic Stresses and Hormone Stimuli.

PubMed

Li, Meng-Yao; Song, Xiong; Wang, Feng; Xiong, Ai-Sheng

2016-01-01

Parsley, one of the most important vegetables in the Apiaceae family, is widely used in the food, medicinal, and cosmetic industries. Recent studies on parsley mainly focus on its chemical composition, and further research involving the analysis of the plant's gene functions and expressions is required. qPCR is a powerful method for detecting very low quantities of target transcript levels and is widely used to study gene expression. To ensure the accuracy of results, a suitable reference gene is necessary for expression normalization. In this study, four software, namely geNorm, NormFinder, BestKeeper, and RefFinder were used to evaluate the expression stabilities of eight candidate reference genes of parsley ( GAPDH, ACTIN, eIF-4 α, SAND, UBC, TIP41, EF-1 α, and TUB ) under various conditions, including abiotic stresses (heat, cold, salt, and drought) and hormone stimuli treatments (GA, SA, MeJA, and ABA). Results showed that EF-1 α and TUB were the most stable genes for abiotic stresses, whereas EF-1 α, GAPDH , and TUB were the top three choices for hormone stimuli treatments. Moreover, EF-1 α and TUB were the most stable reference genes among all tested samples, and UBC was the least stable one. Expression analysis of PcDREB1 and PcDREB2 further verified that the selected stable reference genes were suitable for gene expression normalization. This study can guide the selection of suitable reference genes in gene expression in parsley.

CD-ROM Stress.

ERIC Educational Resources Information Center

Bunge, Charles A.

1991-01-01

Discussion of stress in library reference departments focuses on stress caused by CD-ROM reference tools. Topics discussed include work overload; nonreference duties; patron attitudes and behavior; staff attitudes; the need for proper staff training; and the need for library administrators to be sensitive to reference staff needs. (LRW)

Prevalence of Stress References on College Freshmen Facebook Profiles

PubMed Central

EGAN, KATIE G.; MORENO, MEGAN A.

2011-01-01

Stress is common among college students and associated with adverse health outcomes. This study used the social networking Web site Facebook to identify self-reported stress and associated conditions among college students. Public Facebook profiles of undergraduate freshman at a large Midwestern State University (n = 300) were identified using a Facebook search. Content analysis of Facebook profiles included demographic information and displayed references to stress, weight concerns, depressive symptoms, and alcohol. The mean reported age was 18.4 years, and the majority of profile owners were female (62%). Stress references were displayed on 37% of the profiles, weight concerns on 6%, depressive symptoms on 24%, and alcohol on 73%. The display of stress references was associated with female sex (odds ratio [OR], 2.81; confidence interval [CI], 1.7–4.7), weight concerns (OR, 5.36; CI, 1.87–15.34), and depressive symptoms (OR, 2.7; CI, 1.57–4.63). No associations were found between stress and alcohol references. College freshmen frequently display references to stress on Facebook profiles with prevalence rates similar to self-reported national survey data. Findings suggest a positive association between referencing stress and both weight concerns and depressive symptoms. Facebook may be a useful venue to identify students at risk for stress-related conditions and to disseminate information about campus resources to these students. PMID:21436681

Evaluation and selection of reliable reference genes for gene expression under abiotic stress in cotton (Gossypium hirsutum L.).

PubMed

Wang, Min; Wang, Qinglian; Zhang, Baohong

2013-11-01

Reference genes are critical for normalization of the gene expression level of target genes. The widely used housekeeping genes may change their expression levels at different tissue under different treatment or stress conditions. Therefore, systematical evaluation on the housekeeping genes is required for gene expression analysis. Up to date, no work was performed to evaluate the housekeeping genes in cotton under stress treatment. In this study, we chose 10 housekeeping genes to systematically assess their expression levels at two different tissues (leaves and roots) under two different abiotic stresses (salt and drought) with three different concentrations. Our results show that there is no best reference gene for all tissues at all stress conditions. The reliable reference gene should be selected based on a specific condition. For example, under salt stress, UBQ7, GAPDH and EF1A8 are better reference genes in leaves; TUA10, UBQ7, CYP1, GAPDH and EF1A8 were better in roots. Under drought stress, UBQ7, EF1A8, TUA10, and GAPDH showed less variety of expression level in leaves and roots. Thus, it is better to identify reliable reference genes first before performing any gene expression analysis. However, using a combination of housekeeping genes as reference gene may provide a new strategy for normalization of gene expression. In this study, we found that combination of four housekeeping genes worked well as reference genes under all the stress conditions. © 2013.

Selection of relatively exact reference genes for gene expression studies in goosegrass (Eleusine indica) under herbicide stress

PubMed Central

Chen, Jingchao; Huang, Zhaofeng; Huang, Hongjuan; Wei, Shouhui; Liu, Yan; Jiang, Cuilan; Zhang, Jie; Zhang, Chaoxian

2017-01-01

Goosegrass (Eleusine indica) is one of the most serious annual grassy weeds worldwide, and its evolved herbicide-resistant populations are more difficult to control. Quantitative real-time PCR (qPCR) is a common technique for investigating the resistance mechanism; however, there is as yet no report on the systematic selection of stable reference genes for goosegrass. This study proposed to test the expression stability of 9 candidate reference genes in goosegrass in different tissues and developmental stages and under stress from three types of herbicide. The results show that for different developmental stages and organs (control), eukaryotic initiation factor 4 A (eIF-4) is the most stable reference gene. Chloroplast acetolactate synthase (ALS) is the most stable reference gene under glyphosate stress. Under glufosinate stress, eIF-4 is the best reference gene. Ubiquitin-conjugating enzyme (UCE) is the most stable reference gene under quizalofop-p-ethyl stress. The gene eIF-4 is the recommended reference gene for goosegrass under the stress of all three herbicides. Moreover, pairwise analysis showed that seven reference genes were sufficient to normalize the gene expression data under three herbicides treatment. This study provides a list of reliable reference genes for transcript normalization in goosegrass, which will facilitate resistance mechanism studies in this weed species. PMID:28429727

Comparative study on the welded structure fatigue strength assessment method

NASA Astrophysics Data System (ADS)

Hu, Tao

2018-04-01

Due to the welding structure is widely applied in various industries, especially the pressure container, motorcycle, automobile, aviation, ship industry, such as large crane steel structure, so for welded structure fatigue strength evaluation is particularly important. For welded structure fatigue strength evaluation method mainly has four kinds of, the more from the use of two kinds of welded structure fatigue strength evaluation method, namely the nominal stress method and the hot spot stress evaluation method, comparing from its principle, calculation method for the process analysis and research, compare the similarities and the advantages and disadvantages, the analysis of practical engineering problems to provide the reference for every profession and trade, as well as the future welded structure fatigue strength and life evaluation method put forward outlook.

Estimates of bottom roughness length and bottom shear stress in South San Francisco Bay, California

USGS Publications Warehouse

Cheng, R.T.; Ling, C.-H.; Gartner, J.W.; Wang, P.-F.

1999-01-01

A field investigation of the hydrodynamics and the resuspension and transport of participate matter in a bottom boundary layer was carried out in South San Francisco Bay (South Bay), California, during March-April 1995. Using broadband acoustic Doppler current profilers, detailed measurements of turbulent mean velocity distribution within 1.5 m above bed have been obtained. A global method of data analysis was used for estimating bottom roughness length zo and bottom shear stress (or friction velocities u*). Field data have been examined by dividing the time series of velocity profiles into 24-hour periods and independently analyzing the velocity profile time series by flooding and ebbing periods. The global method of solution gives consistent properties of bottom roughness length zo and bottom shear stress values (or friction velocities u*) in South Bay. Estimated mean values of zo and u* for flooding and ebbing cycles are different. The differences in mean zo and u* are shown to be caused by tidal current flood-ebb inequality, rather than the flooding or ebbing of tidal currents. The bed shear stress correlates well with a reference velocity; the slope of the correlation defines a drag coefficient. Forty-three days of field data in South Bay show two regimes of zo (and drag coefficient) as a function of a reference velocity. When the mean velocity is >25-30 cm s-1, the ln zo (and thus the drag coefficient) is inversely proportional to the reference velocity. The cause for the reduction of roughness length is hypothesized as sediment erosion due to intensifying tidal currents thereby reducing bed roughness. When the mean velocity is <25-30 cm s-1, the correlation between zo and the reference velocity is less clear. A plausible explanation of scattered values of zo under this condition may be sediment deposition. Measured sediment data were inadequate to support this hypothesis, but the proposed hypothesis warrants further field investigation.

Dynamic stress changes during earthquake rupture

USGS Publications Warehouse

Day, S.M.; Yu, G.; Wald, D.J.

1998-01-01

We assess two competing dynamic interpretations that have been proposed for the short slip durations characteristic of kinematic earthquake models derived by inversion of earthquake waveform and geodetic data. The first interpretation would require a fault constitutive relationship in which rapid dynamic restrengthening of the fault surface occurs after passage of the rupture front, a hypothesized mechanical behavior that has been referred to as "self-healing." The second interpretation would require sufficient spatial heterogeneity of stress drop to permit rapid equilibration of elastic stresses with the residual dynamic friction level, a condition we refer to as "geometrical constraint." These interpretations imply contrasting predictions for the time dependence of the fault-plane shear stresses. We compare these predictions with dynamic shear stress changes for the 1992 Landers (M 7.3), 1994 Northridge (M 6.7), and 1995 Kobe (M 6.9) earthquakes. Stress changes are computed from kinematic slip models of these earthquakes, using a finite-difference method. For each event, static stress drop is highly variable spatially, with high stress-drop patches embedded in a background of low, and largely negative, stress drop. The time histories of stress change show predominantly monotonic stress change after passage of the rupture front, settling to a residual level, without significant evidence for dynamic restrengthening. The stress change at the rupture front is usually gradual rather than abrupt, probably reflecting the limited resolution inherent in the underlying kinematic inversions. On the basis of this analysis, as well as recent similar results obtained independently for the Kobe and Morgan Hill earthquakes, we conclude that, at the present time, the self-healing hypothesis is unnecessary to explain earthquake kinematics.

Identification and Validation of Reference Genes and Their Impact on Normalized Gene Expression Studies across Cultivated and Wild Cicer Species

PubMed Central

Reddy, Palakolanu Sudhakar; Sri Cindhuri, Katamreddy; Sivaji Ganesh, Adusumalli; Sharma, Kiran Kumar

2016-01-01

Quantitative Real-Time PCR (qPCR) is a preferred and reliable method for accurate quantification of gene expression to understand precise gene functions. A total of 25 candidate reference genes including traditional and new generation reference genes were selected and evaluated in a diverse set of chickpea samples. The samples used in this study included nine chickpea genotypes (Cicer spp.) comprising of cultivated and wild species, six abiotic stress treatments (drought, salinity, high vapor pressure deficit, abscisic acid, cold and heat shock), and five diverse tissues (leaf, root, flower, seedlings and seed). The geNorm, NormFinder and RefFinder algorithms used to identify stably expressed genes in four sample sets revealed stable expression of UCP and G6PD genes across genotypes, while TIP41 and CAC were highly stable under abiotic stress conditions. While PP2A and ABCT genes were ranked as best for different tissues, ABCT, UCP and CAC were most stable across all samples. This study demonstrated the usefulness of new generation reference genes for more accurate qPCR based gene expression quantification in cultivated as well as wild chickpea species. Validation of the best reference genes was carried out by studying their impact on normalization of aquaporin genes PIP1;4 and TIP3;1, in three contrasting chickpea genotypes under high vapor pressure deficit (VPD) treatment. The chickpea TIP3;1 gene got significantly up regulated under high VPD conditions with higher relative expression in the drought susceptible genotype, confirming the suitability of the selected reference genes for expression analysis. This is the first comprehensive study on the stability of the new generation reference genes for qPCR studies in chickpea across species, different tissues and abiotic stresses. PMID:26863232

Identification and Validation of Reference Genes and Their Impact on Normalized Gene Expression Studies across Cultivated and Wild Cicer Species.

PubMed

Reddy, Dumbala Srinivas; Bhatnagar-Mathur, Pooja; Reddy, Palakolanu Sudhakar; Sri Cindhuri, Katamreddy; Sivaji Ganesh, Adusumalli; Sharma, Kiran Kumar

2016-01-01

Quantitative Real-Time PCR (qPCR) is a preferred and reliable method for accurate quantification of gene expression to understand precise gene functions. A total of 25 candidate reference genes including traditional and new generation reference genes were selected and evaluated in a diverse set of chickpea samples. The samples used in this study included nine chickpea genotypes (Cicer spp.) comprising of cultivated and wild species, six abiotic stress treatments (drought, salinity, high vapor pressure deficit, abscisic acid, cold and heat shock), and five diverse tissues (leaf, root, flower, seedlings and seed). The geNorm, NormFinder and RefFinder algorithms used to identify stably expressed genes in four sample sets revealed stable expression of UCP and G6PD genes across genotypes, while TIP41 and CAC were highly stable under abiotic stress conditions. While PP2A and ABCT genes were ranked as best for different tissues, ABCT, UCP and CAC were most stable across all samples. This study demonstrated the usefulness of new generation reference genes for more accurate qPCR based gene expression quantification in cultivated as well as wild chickpea species. Validation of the best reference genes was carried out by studying their impact on normalization of aquaporin genes PIP1;4 and TIP3;1, in three contrasting chickpea genotypes under high vapor pressure deficit (VPD) treatment. The chickpea TIP3;1 gene got significantly up regulated under high VPD conditions with higher relative expression in the drought susceptible genotype, confirming the suitability of the selected reference genes for expression analysis. This is the first comprehensive study on the stability of the new generation reference genes for qPCR studies in chickpea across species, different tissues and abiotic stresses.

Identification of Appropriate Reference Genes for Normalization of miRNA Expression in Grafted Watermelon Plants under Different Nutrient Stresses

PubMed Central

Wu, Weifang; Deng, Qin; Shi, Pibiao; Yang, Jinghua; Hu, Zhongyuan; Zhang, Mingfang

2016-01-01

Watermelon (Citrullus lanatus) is a globally important crop belonging to the family Cucurbitaceae. The grafting technique is commonly used to improve its tolerance to stress, as well as to enhance its nutrient uptake and utilization. It is believed that miRNA is most likely involved in its nutrient-starvation response as a graft-transportable signal. The quantitative real-time reverse transcriptase polymerase chain reaction is the preferred method for miRNA functional analysis, in which reliable reference genes for normalization are crucial to ensure the accuracy. The purpose of this study was to select appropriate reference genes in scion (watermelon) and rootstocks (squash and bottle gourd) of grafted watermelon plants under normal growth conditions and nutrient stresses (nitrogen and phosphorus starvation). Under nutrient starvation, geNorm identified miR167c and miR167f as two most stable genes in both watermelon leaves and squash roots. miR166b was recommended by both geNorm and NormFinder as the best reference in bottle gourd roots under nutrient limitation. Expression of a new Cucurbitaceae miRNA, miR85, was used to validate the reliability of candidate reference genes under nutrient starvation. Moreover, by comparing several target genes expression in qRT-PCR analysis with those in RNA-seq data, miR166b and miR167c were proved to be the most suitable reference genes to normalize miRNA expression under normal growth condition in scion and rootstock tissues, respectively. This study represents the first comprehensive survey of the stability of miRNA reference genes in Cucurbitaceae and provides valuable information for investigating more accurate miRNA expression involving grafted watermelon plants. PMID:27749935

Identification of Appropriate Reference Genes for Normalization of miRNA Expression in Grafted Watermelon Plants under Different Nutrient Stresses.

PubMed

Wu, Weifang; Deng, Qin; Shi, Pibiao; Yang, Jinghua; Hu, Zhongyuan; Zhang, Mingfang

2016-01-01

Watermelon (Citrullus lanatus) is a globally important crop belonging to the family Cucurbitaceae. The grafting technique is commonly used to improve its tolerance to stress, as well as to enhance its nutrient uptake and utilization. It is believed that miRNA is most likely involved in its nutrient-starvation response as a graft-transportable signal. The quantitative real-time reverse transcriptase polymerase chain reaction is the preferred method for miRNA functional analysis, in which reliable reference genes for normalization are crucial to ensure the accuracy. The purpose of this study was to select appropriate reference genes in scion (watermelon) and rootstocks (squash and bottle gourd) of grafted watermelon plants under normal growth conditions and nutrient stresses (nitrogen and phosphorus starvation). Under nutrient starvation, geNorm identified miR167c and miR167f as two most stable genes in both watermelon leaves and squash roots. miR166b was recommended by both geNorm and NormFinder as the best reference in bottle gourd roots under nutrient limitation. Expression of a new Cucurbitaceae miRNA, miR85, was used to validate the reliability of candidate reference genes under nutrient starvation. Moreover, by comparing several target genes expression in qRT-PCR analysis with those in RNA-seq data, miR166b and miR167c were proved to be the most suitable reference genes to normalize miRNA expression under normal growth condition in scion and rootstock tissues, respectively. This study represents the first comprehensive survey of the stability of miRNA reference genes in Cucurbitaceae and provides valuable information for investigating more accurate miRNA expression involving grafted watermelon plants.

Rheological properties of soil: a review

NASA Astrophysics Data System (ADS)

Zhu, Guangli; Zhu, Long; Yu, Chao

2017-05-01

Recently rheological methods have been applied to investigate the mechanical properties of soil micro-structure. Rheological techniques have a number of quantitative physically based measurements and offer a better understanding of how soil micro-structure behaves when subject to stress. Rheological material is refers to deformation properties similar to the solid and flow properties similar to the liquid of bound water and colloidal substances under stress. Soil rheology is divided into fluid rheology and plasticity rheology. Fluid rheology is produced by rheological material. Plasticity rheology mainly refers to the sliding and peristaltic between soil solid particles under shear stress. It is generally believed that the soft soil rheology mainly belongs to fluid rheology, while the rheology of sand and other coarse grained soil mainly belongs to plasticity rheology. Thus, rheology mechanisms of soft soil and sand are different. This paper introduces the methods of the research progress on the rheology of soil, in the soil rheological mechanism, rheological model and rheological numerical aspects of the research at home and abroad were summarized and analysed, discussed the problems existed in related research, and puts forward some suggestions for the future study on the rheology of soil.

Identification of Reference Genes and Analysis of Heat Shock Protein Gene Expression in Lingzhi or Reishi Medicinal Mushroom, Ganoderma lucidum, after Exposure to Heat Stress.

PubMed

Liu, Yong-Nan; Lu, Xiao-Xiao; Ren, Ang; Shi, Liang; Jiang, Ai-Liang; Yu, Han-Shou; Zhao, Ming-Wen

2017-01-01

Ganoderma lucidum has been considered an emerging model species for studying how environmental factors regulate the growth, development, and secondary metabolism of Basidiomycetes. Heat stress, which is one of the most important environmental abiotic stresses, seriously affects the growth, development, and yield of microorganisms. Understanding the response to heat stress has gradually become a hotspot in microorganism research. But suitable reference genes for expression analysis under heat stress have not been reported in G. lucidum. In this study, we systematically identified 11 candidate reference genes that were measured using reverse transcriptase quantitative polymerase chain reaction, and the gene expression stability was analyzed under heat stress conditions using geNorm and NormFinder. The results show that 5 reference genes-CYP and TIF, followed by UCE2, ACTIN, and UBQ1-are the most stable genes under our experimental conditions. Moreover, the relative expression levels of 3 heat stress response genes (hsp17.4, hsp70, and hsp90) were analyzed under heat stress conditions with different normalization strategies. The results show that use of a gene with unstable expression (SAND) as the reference gene leads to biased data and misinterpretations of the target gene expression level under heat stress.

SPARSE—A subgrid particle averaged Reynolds stress equivalent model: testing with a priori closure

PubMed Central

Davis, Sean L.; Sen, Oishik; Udaykumar, H. S.

2017-01-01

A Lagrangian particle cloud model is proposed that accounts for the effects of Reynolds-averaged particle and turbulent stresses and the averaged carrier-phase velocity of the subparticle cloud scale on the averaged motion and velocity of the cloud. The SPARSE (subgrid particle averaged Reynolds stress equivalent) model is based on a combination of a truncated Taylor expansion of a drag correction function and Reynolds averaging. It reduces the required number of computational parcels to trace a cloud of particles in Eulerian–Lagrangian methods for the simulation of particle-laden flow. Closure is performed in an a priori manner using a reference simulation where all particles in the cloud are traced individually with a point-particle model. Comparison of a first-order model and SPARSE with the reference simulation in one dimension shows that both the stress and the averaging of the carrier-phase velocity on the cloud subscale affect the averaged motion of the particle. A three-dimensional isotropic turbulence computation shows that only one computational parcel is sufficient to accurately trace a cloud of tens of thousands of particles. PMID:28413341

SPARSE-A subgrid particle averaged Reynolds stress equivalent model: testing with a priori closure.

PubMed

Davis, Sean L; Jacobs, Gustaaf B; Sen, Oishik; Udaykumar, H S

2017-03-01

A Lagrangian particle cloud model is proposed that accounts for the effects of Reynolds-averaged particle and turbulent stresses and the averaged carrier-phase velocity of the subparticle cloud scale on the averaged motion and velocity of the cloud. The SPARSE (subgrid particle averaged Reynolds stress equivalent) model is based on a combination of a truncated Taylor expansion of a drag correction function and Reynolds averaging. It reduces the required number of computational parcels to trace a cloud of particles in Eulerian-Lagrangian methods for the simulation of particle-laden flow. Closure is performed in an a priori manner using a reference simulation where all particles in the cloud are traced individually with a point-particle model. Comparison of a first-order model and SPARSE with the reference simulation in one dimension shows that both the stress and the averaging of the carrier-phase velocity on the cloud subscale affect the averaged motion of the particle. A three-dimensional isotropic turbulence computation shows that only one computational parcel is sufficient to accurately trace a cloud of tens of thousands of particles.

Identification of suitable qPCR reference genes in leaves of Brassica oleracea under abiotic stresses.

PubMed

Brulle, Franck; Bernard, Fabien; Vandenbulcke, Franck; Cuny, Damien; Dumez, Sylvain

2014-04-01

Real-time quantitative PCR is nowadays a standard method to study gene expression variations in various samples and experimental conditions. However, to interpret results accurately, data normalization with appropriate reference genes appears to be crucial. The present study describes the identification and the validation of suitable reference genes in Brassica oleracea leaves. Expression stability of eight candidates was tested following drought and cold abiotic stresses by using three different softwares (BestKeeper, NormFinder and geNorm). Four genes (BolC.TUB6, BolC.SAND1, BolC.UBQ2 and BolC.TBP1) emerged as the most stable across the tested conditions. Further gene expression analysis of a drought- and a cold-responsive gene (BolC.DREB2A and BolC.ELIP, respectively), confirmed the stability and the reliability of the identified reference genes when used for normalization in the leaves of B. oleracea. These four genes were finally tested upon a benzene exposure and all appeared to be useful reference genes along this toxicological condition. These results provide a good starting point for future studies involving gene expression measurement on leaves of B. oleracea exposed to environmental modifications.

Selection and testing of reference genes for accurate RT-qPCR in rice seedlings under iron toxicity.

PubMed

Santos, Fabiane Igansi de Castro Dos; Marini, Naciele; Santos, Railson Schreinert Dos; Hoffman, Bianca Silva Fernandes; Alves-Ferreira, Marcio; de Oliveira, Antonio Costa

2018-01-01

Reverse Transcription quantitative PCR (RT-qPCR) is a technique for gene expression profiling with high sensibility and reproducibility. However, to obtain accurate results, it depends on data normalization by using endogenous reference genes whose expression is constitutive or invariable. Although the technique is widely used in plant stress analyzes, the stability of reference genes for iron toxicity in rice (Oryza sativa L.) has not been thoroughly investigated. Here, we tested a set of candidate reference genes for use in rice under this stressful condition. The test was performed using four distinct methods: NormFinder, BestKeeper, geNorm and the comparative ΔCt. To achieve reproducible and reliable results, Minimum Information for Publication of Quantitative Real-Time PCR Experiments (MIQE) guidelines were followed. Valid reference genes were found for shoot (P2, OsGAPDH and OsNABP), root (OsEF-1a, P8 and OsGAPDH) and root+shoot (OsNABP, OsGAPDH and P8) enabling us to perform further reliable studies for iron toxicity in both indica and japonica subspecies. The importance of the study of other than the traditional endogenous genes for use as normalizers is also shown here.

Selection and testing of reference genes for accurate RT-qPCR in rice seedlings under iron toxicity

PubMed Central

dos Santos, Fabiane Igansi de Castro; Marini, Naciele; dos Santos, Railson Schreinert; Hoffman, Bianca Silva Fernandes; Alves-Ferreira, Marcio

2018-01-01

Reverse Transcription quantitative PCR (RT-qPCR) is a technique for gene expression profiling with high sensibility and reproducibility. However, to obtain accurate results, it depends on data normalization by using endogenous reference genes whose expression is constitutive or invariable. Although the technique is widely used in plant stress analyzes, the stability of reference genes for iron toxicity in rice (Oryza sativa L.) has not been thoroughly investigated. Here, we tested a set of candidate reference genes for use in rice under this stressful condition. The test was performed using four distinct methods: NormFinder, BestKeeper, geNorm and the comparative ΔCt. To achieve reproducible and reliable results, Minimum Information for Publication of Quantitative Real-Time PCR Experiments (MIQE) guidelines were followed. Valid reference genes were found for shoot (P2, OsGAPDH and OsNABP), root (OsEF-1a, P8 and OsGAPDH) and root+shoot (OsNABP, OsGAPDH and P8) enabling us to perform further reliable studies for iron toxicity in both indica and japonica subspecies. The importance of the study of other than the traditional endogenous genes for use as normalizers is also shown here. PMID:29494624

[Development and application of reference materials containing mixed degradation products of amoxicillin and ampicillin].

PubMed

Li, Wei; Zhang, Wei-Qing; Li, Xiang; Hu, Chang-Qin

2014-09-01

Reference materials containing mixed degradation products of amoxicillin and ampicillin were developed after optimization of preparation processes. The target impurities were obtained by controlled stress testing, and each major component was identified with HPLC-MS and compared with single traceable reference standard each. The developed reference materials were applied to system suitability test for verifying HPLC system performed in accordance with set forth in China Pharmacopeia and identification of major impurities in samples based on retention and spectra information, which have advantages over the methods put forth in foreign pharmacopoeias. The development and application of the reference materials offer an effective way for rapid identification of impurities in chromatograms, and provide references for analyzing source of impurities and evaluation of drug quality.

Recovery after chronic stress within spatial reference and working memory domains: correspondence with hippocampal morphology.

PubMed

Hoffman, A N; Krigbaum, A; Ortiz, J B; Mika, A; Hutchinson, K M; Bimonte-Nelson, H A; Conrad, C D

2011-09-01

Chronic stress results in reversible spatial learning impairments in the Morris water maze that correspond with hippocampal CA3 dendritic retraction in male rats. Whether chronic stress impacts different types of memory domains, and whether these can similarly recover, is unknown. This study assessed the effects of chronic stress with and without a post-stress delay to evaluate learning and memory deficits within two memory domains, reference and working memory, in the radial arm water maze (RAWM). Three groups of 5-month-old male Sprague-Dawley rats were either not stressed [control (CON)], or restrained (6 h/day for 21 days) and then tested on the RAWM either on the next day [stress immediate (STR-IMM)] or following a 21-day delay [stress delay (STR-DEL)]. Although the groups learned the RAWM task similarly, groups differed in their 24-h retention trial assessment. Specifically, the STR-IMM group made more errors within both the spatial reference and working memory domains, and these deficits corresponded with a reduction in apical branch points and length of hippocampal CA3 dendrites. In contrast, the STR-DEL group showed significantly fewer errors in both the reference and working memory domains than the STR-IMM group. Moreover, the STR-DEL group showed better RAWM performance in the reference memory domain than did the CON group, and this corresponded with restored CA3 dendritic complexity, revealing long-term enhancing actions of chronic stress. These results indicate that chronic stress-induced spatial working and reference memory impairments, and CA3 dendritic retraction, are reversible, with chronic stress having lasting effects that can benefit spatial reference memory, but with these lasting beneficial effects being independent of CA3 dendritic complexity. © 2011 The Authors. European Journal of Neuroscience © 2011 Federation of European Neuroscience Societies and Blackwell Publishing Ltd.

Identification and validation of reference genes for quantification of target gene expression with quantitative real-time PCR for tall fescue under four abiotic stresses.

PubMed

Yang, Zhimin; Chen, Yu; Hu, Baoyun; Tan, Zhiqun; Huang, Bingru

2015-01-01

Tall fescue (Festuca arundinacea Schreb.) is widely utilized as a major forage and turfgrass species in the temperate regions of the world and is a valuable plant material for studying molecular mechanisms of grass stress tolerance due to its superior drought and heat tolerance among cool-season species. Selection of suitable reference genes for quantification of target gene expression is important for the discovery of molecular mechanisms underlying improved growth traits and stress tolerance. The stability of nine potential reference genes (ACT, TUB, EF1a, GAPDH, SAND, CACS, F-box, PEPKR1 and TIP41) was evaluated using four programs, GeNorm, NormFinder, BestKeeper, and RefFinder. The combinations of SAND and TUB or TIP41 and TUB were most stably expressed in salt-treated roots or leaves. The combinations of GAPDH with TIP41 or TUB were stable in roots and leaves under drought stress. TIP41 and PEPKR1 exhibited stable expression in cold-treated roots, and the combination of F-box, TIP41 and TUB was also stable in cold-treated leaves. CACS and TUB were the two most stable reference genes in heat-stressed roots. TIP41 combined with TUB and ACT was stably expressed in heat-stressed leaves. Finally, quantitative real-time polymerase chain reaction (qRT-PCR) assays of the target gene FaWRKY1 using the identified most stable reference genes confirmed the reliability of selected reference genes. The selection of suitable reference genes in tall fescue will allow for more accurate identification of stress-tolerance genes and molecular mechanisms conferring stress tolerance in this stress-tolerant species.

Role of young women's depression and stress symptoms in their weekly use and nonuse of contraceptive methods.

PubMed

Hall, Kelli Stidham; Moreau, Caroline; Trussell, James; Barber, Jennifer

2013-08-01

We prospectively examined the influence of young women's depression and psychological stress symptoms on their weekly contraceptive method use. We examined data from 689 women ages 18-20 years participating in a longitudinal cohort study. Women completed 8,877 weekly journals over the first year, which assessed reproductive, relationship, and health information. We focused on baseline depression (Center for Epidemiologic Studies-Depression Scale) and stress (Perceived Stress Scale) symptoms and weekly contraceptive method use. Analyses used multivariate random effects and multinomial logistic regression. Approximately one quarter of women exhibited moderate/severe depression (27%) and stress (25%) symptoms at baseline. Contraception was not used in 10% of weekly journals, whereas coital and noncoital methods were used in 42% and 48% of weeks, respectively. In adjusted models, women with moderate/severe stress symptoms had more than twice the odds of contraception nonuse than women without stress (odds ratio [OR] 2.23, confidence interval [CI] 1.02-4.89, p = .04). Additionally, women with moderate/severe depression (RR .52, CI .40-.68, p < .001) and stress (relative risk [RR] .75, CI .58-.96, p = .02) symptoms had lower relative risks of using long-acting methods than oral contraceptives (OCs; reference category). Women with stress symptoms also had higher relative risks of using condoms (RR 1.17, CI 1.00-1.34, p = .02) and withdrawal (RR 1.29, CI 1.10-1.51, p = .001) than OCs. The relative risk of dual versus single method use was also lower for women with stress symptoms. Women's psychological symptoms predicted their weekly contraceptive nonuse and use of less effective methods. Further research can determine the influence of dynamic psychological symptoms on contraceptive choices and failures over time. Copyright © 2013 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

An approach to an acute emotional stress reference scale.

PubMed

Garzon-Rey, J M; Arza, A; de-la-Camara, C; Lobo, A; Armario, A; Aguilo, J

2017-06-16

The clinical diagnosis aims to identify the degree of affectation of the psycho-physical state of the patient as a guide to therapeutic intervention. In stress, the lack of a measurement tool based on a reference makes it difficult to quantitatively assess this degree of affectation. To define and perform a primary assessment of a standard reference in order to measure acute emotional stress from the markers identified as indicators of the degree. Psychometric tests and biochemical variables are, in general, the most accepted stress measurements by the scientific community. Each one of them probably responds to different and complementary processes related to the reaction to a stress stimulus. The reference that is proposed is a weighted mean of these indicators by assigning them relative weights in accordance with a principal components analysis. An experimental study was conducted on 40 healthy young people subjected to the psychosocial stress stimulus of the Trier Social Stress Test in order to perform a primary assessment and consistency check of the proposed reference. The proposed scale clearly differentiates between the induced relax and stress states. Accepting the subjectivity of the definition and the lack of a subsequent validation with new experimental data, the proposed standard differentiates between a relax state and an emotional stress state triggered by a moderate stress stimulus, as it is the Trier Social Stress Test. The scale is robust. Although the variations in the percentage composition slightly affect the score, but they do not affect the valid differentiation between states.

On 3-D inelastic analysis methods for hot section components (base program)

NASA Technical Reports Server (NTRS)

Wilson, R. B.; Bak, M. J.; Nakazawa, S.; Banerjee, P. K.

1986-01-01

A 3-D Inelastic Analysis Method program is described. This program consists of a series of new computer codes embodying a progression of mathematical models (mechanics of materials, special finite element, boundary element) for streamlined analysis of: (1) combustor liners, (2) turbine blades, and (3) turbine vanes. These models address the effects of high temperatures and thermal/mechanical loadings on the local (stress/strain)and global (dynamics, buckling) structural behavior of the three selected components. Three computer codes, referred to as MOMM (Mechanics of Materials Model), MHOST (Marc-Hot Section Technology), and BEST (Boundary Element Stress Technology), have been developed and are briefly described in this report.

Static analysis of rectifier cabinet for nuclear power generating stations based on finite element method

NASA Astrophysics Data System (ADS)

Yin, Qiang; Chen, Tian-jin; Li, Wei-yang; Xiong, Ze-cheng; Ma, Rui

2017-09-01

In order to obtain the deformation map and equivalent stress distribution of rectifier cabinet for nuclear power generating stations, the quality distribution of structure and electrical are described, the tensile bond strengths of the rings are checked, and the finite element model of cabinet is set up by ANSYS. The transport conditions of the hoisting state and fork loading state are analyzed. The deformation map and equivalent stress distribution are obtained. The attentive problems are put forward. It is a reference for analysis method and the obtained results for the transport of rectifier cabinet for nuclear power generating stations.

Seismic Response Analysis of an Unanchored Steel Tank under Horizontal Excitation

NASA Astrophysics Data System (ADS)

Rulin, Zhang; Xudong, Cheng; Youhai, Guan

2017-06-01

The seismic performance of liquid storage tank affects the safety of people’s life and property. A 3-D finite element method (FEM) model of storage tank is established, which considers the liquid-solid coupling effect. Then, the displacement and stress distribution along the tank wall is studied under El Centro earthquake. Results show that, large amplitude sloshing with long period appears on liquid surface. The elephant-foot deformation occurs near the tank bottom, and at the elephant-foot deformation position maximum hoop stress and axial stress appear. The maximum axial compressive stress is very close to the allowable critical stress calculated by the design code, and may be local buckling failure occurs. The research can provide some reference for the seismic design of storage tanks.

Fracture mechanics analysis of cracked structures using weight function and neural network method

NASA Astrophysics Data System (ADS)

Chen, J. G.; Zang, F. G.; Yang, Y.; Shi, K. K.; Fu, X. L.

2018-06-01

Stress intensity factors(SIFs) due to thermal-mechanical load has been established by using weight function method. Two reference stress states sere used to determine the coefficients in the weight function. Results were evaluated by using data from literature and show a good agreement between them. So, the SIFs can be determined quickly using the weight function obtained when cracks subjected to arbitrary loads, and presented method can be used for probabilistic fracture mechanics analysis. A probabilistic methodology considering Monte-Carlo with neural network (MCNN) has been developed. The results indicate that an accurate probabilistic characteristic of the KI can be obtained by using the developed method. The probability of failure increases with the increasing of loads, and the relationship between is nonlinear.

Completed Beltrami-Michell Formulation for Analyzing Radially Symmetrical Bodies

NASA Technical Reports Server (NTRS)

Kaljevic, Igor; Saigal, Sunil; Hopkins, Dale A.; Patnaik, Surya N.

1994-01-01

A force method formulation, the completed Beltrami-Michell formulation (CBMF), has been developed for analyzing boundary value problems in elastic continua. The CBMF is obtained by augmenting the classical Beltrami-Michell formulation with novel boundary compatibility conditions. It can analyze general elastic continua with stress, displacement, or mixed boundary conditions. The CBMF alleviates the limitations of the classical formulation, which can solve stress boundary value problems only. In this report, the CBMF is specialized for plates and shells. All equations of the CBMF, including the boundary compatibility conditions, are derived from the variational formulation of the integrated force method (IFM). These equations are defined only in terms of stresses. Their solution for kinematically stable elastic continua provides stress fields without any reference to displacements. In addition, a stress function formulation for plates and shells is developed by augmenting the classical Airy's formulation with boundary compatibility conditions expressed in terms of the stress function. The versatility of the CBMF and the augmented stress function formulation is demonstrated through analytical solutions of several mixed boundary value problems. The example problems include a composite circular plate and a composite circular cylindrical shell under the simultaneous actions of mechanical and thermal loads.

Compatibility Condition in Theory of Solid Mechanics (Elasticity, Structures, and Design Optimization)

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Pai, Shantaram S.; Hopkins, Dale A.

2007-01-01

The strain formulation in elasticity and the compatibility condition in structural mechanics have neither been understood nor have they been utilized. This shortcoming prevented the formulation of a direct method to calculate stress. We have researched and understood the compatibility condition for linear problems in elasticity and in finite element analysis. This has lead to the completion of the method of force with stress (or stress resultant) as the primary unknown. The method in elasticity is referred to as the completed Beltrami-Michell formulation (CBMF), and it is the integrated force method (IFM) in structures. The dual integrated force method (IFMD) with displacement as the primary unknown has been formulated. IFM and IFMD produce identical responses. The variational derivation of the CBMF yielded the new boundary compatibility conditions. The CBMF can be used to solve stress, displacement, and mixed boundary value problems. The IFM in structures produced high-fidelity response even with a modest finite element model. The IFM has influenced structural design considerably. A fully utilized design method for strength and stiffness limitation has been developed. The singularity condition in optimization has been identified. The CBMF and IFM tensorial approaches are robust formulations because of simultaneous emphasis on the equilibrium equation and the compatibility condition.

The association of clinical indication for exercise stress testing with all-cause mortality: the FIT Project

PubMed Central

Kim, Joonseok; Al-Mallah, Mouaz; Juraschek, Stephen P.; Brawner, Clinton; Keteyian, Steve J.; Nasir, Khurram; Dardari, Zeina A.; Blumenthal, Roger S.

2016-01-01

Introduction We hypothesized that the indication for stress testing provided by the referring physician would be an independent predictor of all-cause mortality. Material and methods We studied 48,914 patients from The Henry Ford Exercise Testing Project (The FIT Project) without known congestive heart failure who were referred for a clinical treadmill stress test and followed for 11 ±4.7 years. The reason for stress test referral was abstracted from the clinical test order, and should be considered the primary concerning symptom or indication as stated by the ordering clinician. Hierarchical multivariable Cox proportional hazards regression was performed, after controlling for potential confounders including demographics, risk factors, and medication use as well as additional adjustment for exercise capacity in the final model. Results A total of 67% of the patients were referred for chest pain, 12% for shortness of breath (SOB), 4% for palpitations, 3% for pre-operative evaluation, 6% for abnormal prior testing, and 7% for risk factors only. There were 6,211 total deaths during follow-up. Compared to chest pain, those referred for palpitations (HR = 0.72, 95% CI: 0.60–0.86) and risk factors only (HR = 0.72, 95% CI: 0.63–0.82) had a lower risk of all-cause mortality, whereas those referred for SOB (HR = 1.15, 95% CI: 1.07–1.23) and pre-operative evaluation (HR = 2.11, 95% CI: 1.94–2.30) had an increased risk. In subgroup analysis, referral for palpitations was protective only in those without coronary artery disease (CAD) (HR = 0.75, 95% CI: 0.62–0.90), while SOB increased mortality risk only in those with established CAD (HR = 1.25, 95% CI: 1.10–1.44). Conclusions The indication for stress testing is an independent predictor of mortality, showing an interaction with CAD status. Importantly, SOB may be associated with higher mortality risk than chest pain, particularly in patients with CAD. PMID:27186173

Astronautic Structures Manual, Volume 3

NASA Technical Reports Server (NTRS)

1975-01-01

This document (Volumes I, II, and III) presents a compilation of industry-wide methods in aerospace strength analysis that can be carried out by hand, that are general enough in scope to cover most structures encountered, and that are sophisticated enough to give accurate estimates of the actual strength expected. It provides analysis techniques for the elastic and inelastic stress ranges. It serves not only as a catalog of methods not usually available, but also as a reference source for the background of the methods themselves. An overview of the manual is as follows: Section A is a general introduction of methods used and includes sections on loads, combined stresses, and interaction curves; Section B is devoted to methods of strength analysis; Section C is devoted to the topic of structural stability; Section D is on thermal stresses; Section E is on fatigue and fracture mechanics; Section F is on composites; Section G is on rotating machinery; and Section H is on statistics. These three volumes supersede Volumes I and II, NASA TM X-60041 and NASA TM X-60042, respectively.

Selection of reliable reference genes for quantitative real-time PCR gene expression analysis in Jute (Corchorus capsularis) under stress treatments

PubMed Central

Niu, Xiaoping; Qi, Jianmin; Zhang, Gaoyang; Xu, Jiantang; Tao, Aifen; Fang, Pingping; Su, Jianguang

2015-01-01

To accurately measure gene expression using quantitative reverse transcription PCR (qRT-PCR), reliable reference gene(s) are required for data normalization. Corchorus capsularis, an annual herbaceous fiber crop with predominant biodegradability and renewability, has not been investigated for the stability of reference genes with qRT-PCR. In this study, 11 candidate reference genes were selected and their expression levels were assessed using qRT-PCR. To account for the influence of experimental approach and tissue type, 22 different jute samples were selected from abiotic and biotic stress conditions as well as three different tissue types. The stability of the candidate reference genes was evaluated using geNorm, NormFinder, and BestKeeper programs, and the comprehensive rankings of gene stability were generated by aggregate analysis. For the biotic stress and NaCl stress subsets, ACT7 and RAN were suitable as stable reference genes for gene expression normalization. For the PEG stress subset, UBC, and DnaJ were sufficient for accurate normalization. For the tissues subset, four reference genes TUBβ, UBI, EF1α, and RAN were sufficient for accurate normalization. The selected genes were further validated by comparing expression profiles of WRKY15 in various samples, and two stable reference genes were recommended for accurate normalization of qRT-PCR data. Our results provide researchers with appropriate reference genes for qRT-PCR in C. capsularis, and will facilitate gene expression study under these conditions. PMID:26528312

Technostress and the Reference Librarian.

ERIC Educational Resources Information Center

Kupersmith, John

1992-01-01

Defines "technostress" as the stress experienced by reference librarians who must constantly deal with the demands of new information technology and the changes they produce in the work place. Discussion includes suggested ways in which both organizations and individuals can work to reduce stress. (27 references) (LAE)

Effects of ventilation behaviour on indoor heat load based on test reference years.

PubMed

Rosenfelder, Madeleine; Koppe, Christina; Pfafferott, Jens; Matzarakis, Andreas

2016-02-01

Since 2003, most European countries established heat health warning systems to alert the population to heat load. Heat health warning systems are based on predicted meteorological conditions outdoors. But the majority of the European population spends a substantial amount of time indoors, and indoor thermal conditions can differ substantially from outdoor conditions. The German Meteorological Service (Deutscher Wetterdienst, DWD) extended the existing heat health warning system (HHWS) with a thermal building simulation model to consider heat load indoors. In this study, the thermal building simulation model is used to simulate a standardized building representing a modern nursing home, because elderly and sick people are most sensitive to heat stress. Different types of natural ventilation were simulated. Based on current and future test reference years, changes in the future heat load indoors were analyzed. Results show differences between the various ventilation options and the possibility to minimize the thermal heat stress during summer by using an appropriate ventilation method. Nighttime ventilation for indoor thermal comfort is most important. A fully opened window at nighttime and the 2-h ventilation in the morning and evening are more sufficient to avoid heat stress than a tilted window at nighttime and the 1-h ventilation in the morning and the evening. Especially the ventilation in the morning seems to be effective to keep the heat load indoors low. Comparing the results for the current and the future test reference years, an increase of heat stress on all ventilation types can be recognized.

Functional integrity of the interrenal tissue of yellow perch from contaminated sites tested in vivo

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girard, C.; Brodeur, J.C.; Hontela, A.

1995-12-31

The normal activation of the hypothalamo-pituitary-interrenal axis (HPI axis) in response to capture is disrupted in fish subjected to life-long exposure to heavy metals, PCBs and PAHs. The ability to increase plasma cortisol in yellow perch (Perca flavescens) from sites contaminated by heavy metals and organic compounds, and from a reference site was assessed by the Capture stress test and by the ACTH Challenge test, a new standardized in vivo method designed for field studies. The effects of seasonal factors, such as temperature and gonadal maturity on these tests were investigated. Measures of liver and muscle glycogen and histopathology weremore » made to further characterize the biochemical and structural changes that may occur along with hormonal changes. The Capture stress test showed that an acute source of stress induced a lower cortisol response in fish from the highly contaminated site compared to the reference site, revealing a functional impairment of the HPI axis. The ACTH Challenge test showed that the hormonal responsiveness of the cortisol-secreting interrenal tissue, stimulated by a standard dose of ACTH injected i.p., was lower in fish from the highly contaminated site than the reference site. Spring is the season during which the impairment was the most evident. The possibility of using the reduced capacity of feral fish to respond to a standardized ACTH Challenge as an early bioindicator of toxic stress is discussed.« less

Effects of ventilation behaviour on indoor heat load based on test reference years

NASA Astrophysics Data System (ADS)

Rosenfelder, Madeleine; Koppe, Christina; Pfafferott, Jens; Matzarakis, Andreas

2016-02-01

Since 2003, most European countries established heat health warning systems to alert the population to heat load. Heat health warning systems are based on predicted meteorological conditions outdoors. But the majority of the European population spends a substantial amount of time indoors, and indoor thermal conditions can differ substantially from outdoor conditions. The German Meteorological Service (Deutscher Wetterdienst, DWD) extended the existing heat health warning system (HHWS) with a thermal building simulation model to consider heat load indoors. In this study, the thermal building simulation model is used to simulate a standardized building representing a modern nursing home, because elderly and sick people are most sensitive to heat stress. Different types of natural ventilation were simulated. Based on current and future test reference years, changes in the future heat load indoors were analyzed. Results show differences between the various ventilation options and the possibility to minimize the thermal heat stress during summer by using an appropriate ventilation method. Nighttime ventilation for indoor thermal comfort is most important. A fully opened window at nighttime and the 2-h ventilation in the morning and evening are more sufficient to avoid heat stress than a tilted window at nighttime and the 1-h ventilation in the morning and the evening. Especially the ventilation in the morning seems to be effective to keep the heat load indoors low. Comparing the results for the current and the future test reference years, an increase of heat stress on all ventilation types can be recognized.

Close-range hyperspectral image analysis for the early detection of stress responses in individual plants in a high-throughput phenotyping platform

NASA Astrophysics Data System (ADS)

Mohd Asaari, Mohd Shahrimie; Mishra, Puneet; Mertens, Stien; Dhondt, Stijn; Inzé, Dirk; Wuyts, Nathalie; Scheunders, Paul

2018-04-01

The potential of close-range hyperspectral imaging (HSI) as a tool for detecting early drought stress responses in plants grown in a high-throughput plant phenotyping platform (HTPPP) was explored. Reflectance spectra from leaves in close-range imaging are highly influenced by plant geometry and its specific alignment towards the imaging system. This induces high uninformative variability in the recorded signals, whereas the spectral signature informing on plant biological traits remains undisclosed. A linear reflectance model that describes the effect of the distance and orientation of each pixel of a plant with respect to the imaging system was applied. By solving this model for the linear coefficients, the spectra were corrected for the uninformative illumination effects. This approach, however, was constrained by the requirement of a reference spectrum, which was difficult to obtain. As an alternative, the standard normal variate (SNV) normalisation method was applied to reduce this uninformative variability. Once the envisioned illumination effects were eliminated, the remaining differences in plant spectra were assumed to be related to changes in plant traits. To distinguish the stress-related phenomena from regular growth dynamics, a spectral analysis procedure was developed based on clustering, a supervised band selection, and a direct calculation of a spectral similarity measure against a reference. To test the significance of the discrimination between healthy and stressed plants, a statistical test was conducted using a one-way analysis of variance (ANOVA) technique. The proposed analysis techniques was validated with HSI data of maize plants (Zea mays L.) acquired in a HTPPP for early detection of drought stress in maize plant. Results showed that the pre-processing of reflectance spectra with the SNV effectively reduces the variability due to the expected illumination effects. The proposed spectral analysis method on the normalized spectra successfully detected drought stress from the third day of drought induction, confirming the potential of HSI for drought stress detection studies and further supporting its adoption in HTPPP.

Multicenter evaluation of stress-first myocardial perfusion image triage by nuclear technologists and automated quantification

PubMed Central

Chaudhry, Waseem; Hussain, Nasir; Ahlberg, Alan W.; Croft, Lori B.; Fernandez, Antonio B.; Parker, Mathew W.; Swales, Heather H.; Slomka, Piotr J.; Henzlova, Milena J.; Duvall, W. Lane

2016-01-01

Background A stress-first myocardial perfusion imaging (MPI) protocol saves time, is cost effective, and decreases radiation exposure. A limitation of this protocol is the requirement for physician review of the stress images to determine the need for rest images. This hurdle could be eliminated if an experienced technologist and/or automated computer quantification could make this determination. Methods Images from consecutive patients who were undergoing a stress-first MPI with attenuation correction at two tertiary care medical centers were prospectively reviewed independently by a technologist and cardiologist blinded to clinical and stress test data. Their decision on the need for rest imaging along with automated computer quantification of perfusion results was compared with the clinical reference standard of an assessment of perfusion images by a board-certified nuclear cardiologist that included clinical and stress test data. Results A total of 250 patients (mean age 61 years and 55% female) who underwent a stress-first MPI were studied. According to the clinical reference standard, 42 (16.8%) and 208 (83.2%) stress-first images were interpreted as “needing” and “not needing” rest images, respectively. The technologists correctly classified 229 (91.6%) stress-first images as either “needing” (n = 28) or “not needing” (n = 201) rest images. Their sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) were 66.7%, 96.6%, 80.0%, and 93.5%, respectively. An automated stress TPD score ≥1.2 was associated with optimal sensitivity and specificity and correctly classified 179 (71.6%) stress-first images as either “needing” (n = 31) or “not needing” (n = 148) rest images. Its sensitivity, specificity, PPV, and NPV were 73.8%, 71.2%, 34.1%, and 93.1%, respectively. In a model whereby the computer or technologist could correct for the other's incorrect classification, 242 (96.8%) stress-first images were correctly classified. The composite sensitivity, specificity, PPV, and NPV were 83.3%, 99.5%, 97.2%, and 96.7%, respectively. Conclusion Technologists and automated quantification software had a high degree of agreement with the clinical reference standard for determining the need for rest images in a stress-first imaging protocol. Utilizing an experienced technologist and automated systems to screen stress-first images could expand the use of stress-first MPI to sites where the cardiologist is not immediately available for interpretation. PMID:26566774

Pathophysiology of Stress in Wild and Managed-Care Bottlenose Dolphins (Tursiops truncatus)

DTIC Science & Technology

2014-09-30

populations to establish reference ranges and assess variability across populations (Schwacke et al., 2008). Additionally , thyroid reference values were...stress evaluation using classic stress hormones were paired with biomarker expression using proteomics and metabolomics to provide additional stress...dolphins (27 from the Indian River Lagoon, FL and 22 from Charleston, SC). Additionally , 10 GA and 10 MMP dolphins were sampled multiple times during

Measurement of regional compliance using 4DCT images for assessment of radiation treatment1

PubMed Central

Zhong, Hualiang; Jin, Jian-yue; Ajlouni, Munther; Movsas, Benjamin; Chetty, Indrin J.

2011-01-01

Purpose: Radiation-induced damage, such as inflammation and fibrosis, can compromise ventilation capability of local functional units (alveoli) of the lung. Ventilation function as measured with ventilation images, however, is often complicated by the underlying mechanical variations. The purpose of this study is to present a 4DCT-based method to measure the regional ventilation capability, namely, regional compliance, for the evaluation of radiation-induced lung damage. Methods: Six 4DCT images were investigated in this study: One previously used in the generation of a POPI model and the other five acquired at Henry Ford Health System. A tetrahedral geometrical model was created and scaled to encompass each of the 4DCT image domains. Image registrations were performed on each of the 4DCT images using a multiresolution Demons algorithm. The images at the end of exhalation were selected as a reference. Images at other exhalation phases were registered to the reference phase. For the POPI-modeled patient, each of these registration instances was validated using 40 landmarks. The displacement vector fields (DVFs) were used first to calculate the volumetric variation of each tetrahedron, which represents the change in the air volume. The calculated results were interpolated to generate 3D ventilation images. With the computed DVF, a finite element method (FEM) framework was developed to compute the stress images of the lung tissue. The regional compliance was then defined as the ratio of the ventilation and stress values and was calculated for each phase. Based on iterative FEM simulations, the potential range of the mechanical parameters for the lung was determined by comparing the model-computed average stress to the clinical reference value of airway pressure. The effect of the parameter variations on the computed stress distributions was estimated using Pearson correlation coefficients. Results: For the POPI-modeled patient, five exhalation phases from the start to the end of exhalation were denoted by Pi, i=1,…,5, respectively. The average lung volume variation relative to the reference phase (P5) was reduced from 18% at P1 to 4.8% at P4. The average stress at phase Pi was 1.42, 1.34, 0.74, and 0.28 kPa, and the average regional compliance was 0.19, 0.20, 0.20, and 0.24 for i=1,…,4, respectively. For the other five patients, their average Rv value at the end-inhalation phase was 21.1%, 19.6%, 22.4%, 22.5%, and 18.8%, respectively, and the regional compliance averaged over all six patients is 0.2. For elasticity parameters chosen from the potential parameter range, the resultant stress distributions were found to be similar to each other with Pearson correlation coefficients greater than 0.81. Conclusions: A 4DCT-based mechanical model has been developed to calculate the ventilation and stress images of the lung. The resultant regional compliance represents the lung’s elasticity property and is potentially useful in correlating regions of lung damage with radiation dose following a course of radiation therapy. PMID:21520868

Measurement of regional compliance using 4DCT images for assessment of radiation treatment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhong Hualiang; Jin Jianyue; Ajlouni, Munther

2011-03-15

Purpose: Radiation-induced damage, such as inflammation and fibrosis, can compromise ventilation capability of local functional units (alveoli) of the lung. Ventilation function as measured with ventilation images, however, is often complicated by the underlying mechanical variations. The purpose of this study is to present a 4DCT-based method to measure the regional ventilation capability, namely, regional compliance, for the evaluation of radiation-induced lung damage. Methods: Six 4DCT images were investigated in this study: One previously used in the generation of a POPI model and the other five acquired at Henry Ford Health System. A tetrahedral geometrical model was created and scaledmore » to encompass each of the 4DCT image domains. Image registrations were performed on each of the 4DCT images using a multiresolution Demons algorithm. The images at the end of exhalation were selected as a reference. Images at other exhalation phases were registered to the reference phase. For the POPI-modeled patient, each of these registration instances was validated using 40 landmarks. The displacement vector fields (DVFs) were used first to calculate the volumetric variation of each tetrahedron, which represents the change in the air volume. The calculated results were interpolated to generate 3D ventilation images. With the computed DVF, a finite element method (FEM) framework was developed to compute the stress images of the lung tissue. The regional compliance was then defined as the ratio of the ventilation and stress values and was calculated for each phase. Based on iterative FEM simulations, the potential range of the mechanical parameters for the lung was determined by comparing the model-computed average stress to the clinical reference value of airway pressure. The effect of the parameter variations on the computed stress distributions was estimated using Pearson correlation coefficients. Results: For the POPI-modeled patient, five exhalation phases from the start to the end of exhalation were denoted by P{sub i}, i=1,...,5, respectively. The average lung volume variation relative to the reference phase (P{sub 5}) was reduced from 18% at P{sub 1} to 4.8% at P{sub 4}. The average stress at phase P{sub i} was 1.42, 1.34, 0.74, and 0.28 kPa, and the average regional compliance was 0.19, 0.20, 0.20, and 0.24 for i=1,...,4, respectively. For the other five patients, their average R{sub v} value at the end-inhalation phase was 21.1%, 19.6%, 22.4%, 22.5%, and 18.8%, respectively, and the regional compliance averaged over all six patients is 0.2. For elasticity parameters chosen from the potential parameter range, the resultant stress distributions were found to be similar to each other with Pearson correlation coefficients greater than 0.81. Conclusions: A 4DCT-based mechanical model has been developed to calculate the ventilation and stress images of the lung. The resultant regional compliance represents the lung's elasticity property and is potentially useful in correlating regions of lung damage with radiation dose following a course of radiation therapy.« less

Using RNA-seq data to select reference genes for normalizing gene expression in apple roots.

PubMed

Zhou, Zhe; Cong, Peihua; Tian, Yi; Zhu, Yanmin

2017-01-01

Gene expression in apple roots in response to various stress conditions is a less-explored research subject. Reliable reference genes for normalizing quantitative gene expression data have not been carefully investigated. In this study, the suitability of a set of 15 apple genes were evaluated for their potential use as reliable reference genes. These genes were selected based on their low variance of gene expression in apple root tissues from a recent RNA-seq data set, and a few previously reported apple reference genes for other tissue types. Four methods, Delta Ct, geNorm, NormFinder and BestKeeper, were used to evaluate their stability in apple root tissues of various genotypes and under different experimental conditions. A small panel of stably expressed genes, MDP0000095375, MDP0000147424, MDP0000233640, MDP0000326399 and MDP0000173025 were recommended for normalizing quantitative gene expression data in apple roots under various abiotic or biotic stresses. When the most stable and least stable reference genes were used for data normalization, significant differences were observed on the expression patterns of two target genes, MdLecRLK5 (MDP0000228426, a gene encoding a lectin receptor like kinase) and MdMAPK3 (MDP0000187103, a gene encoding a mitogen-activated protein kinase). Our data also indicated that for those carefully validated reference genes, a single reference gene is sufficient for reliable normalization of the quantitative gene expression. Depending on the experimental conditions, the most suitable reference genes can be specific to the sample of interest for more reliable RT-qPCR data normalization.

Using RNA-seq data to select reference genes for normalizing gene expression in apple roots

PubMed Central

Zhou, Zhe; Cong, Peihua; Tian, Yi

2017-01-01

Gene expression in apple roots in response to various stress conditions is a less-explored research subject. Reliable reference genes for normalizing quantitative gene expression data have not been carefully investigated. In this study, the suitability of a set of 15 apple genes were evaluated for their potential use as reliable reference genes. These genes were selected based on their low variance of gene expression in apple root tissues from a recent RNA-seq data set, and a few previously reported apple reference genes for other tissue types. Four methods, Delta Ct, geNorm, NormFinder and BestKeeper, were used to evaluate their stability in apple root tissues of various genotypes and under different experimental conditions. A small panel of stably expressed genes, MDP0000095375, MDP0000147424, MDP0000233640, MDP0000326399 and MDP0000173025 were recommended for normalizing quantitative gene expression data in apple roots under various abiotic or biotic stresses. When the most stable and least stable reference genes were used for data normalization, significant differences were observed on the expression patterns of two target genes, MdLecRLK5 (MDP0000228426, a gene encoding a lectin receptor like kinase) and MdMAPK3 (MDP0000187103, a gene encoding a mitogen-activated protein kinase). Our data also indicated that for those carefully validated reference genes, a single reference gene is sufficient for reliable normalization of the quantitative gene expression. Depending on the experimental conditions, the most suitable reference genes can be specific to the sample of interest for more reliable RT-qPCR data normalization. PMID:28934340

3-D inelastic analysis methods for hot section components (base program). [turbine blades, turbine vanes, and combustor liners

NASA Technical Reports Server (NTRS)

Wilson, R. B.; Bak, M. J.; Nakazawa, S.; Banerjee, P. K.

1984-01-01

A 3-D inelastic analysis methods program consists of a series of computer codes embodying a progression of mathematical models (mechanics of materials, special finite element, boundary element) for streamlined analysis of combustor liners, turbine blades, and turbine vanes. These models address the effects of high temperatures and thermal/mechanical loadings on the local (stress/strain) and global (dynamics, buckling) structural behavior of the three selected components. These models are used to solve 3-D inelastic problems using linear approximations in the sense that stresses/strains and temperatures in generic modeling regions are linear functions of the spatial coordinates, and solution increments for load, temperature and/or time are extrapolated linearly from previous information. Three linear formulation computer codes, referred to as MOMM (Mechanics of Materials Model), MHOST (MARC-Hot Section Technology), and BEST (Boundary Element Stress Technology), were developed and are described.

A Novel Arterial Constitutive Model in a Commercial Finite Element Package: Application to Balloon Angioplasty

PubMed Central

Zhao, Xuefeng; Liu, Yi; Zhang, Wei; Wang, Cong; Kassab, Ghassan S.

2011-01-01

Recently, a novel linearized constitutive model with a new strain measure that absorbs the material nonlinearity was validated for arteries. In this study, the linearized arterial stress-strain relationship is implemented into a finite element method package ANSYS, via the user subroutine USERMAT. The reference configuration is chosen to be the closed cylindrical tube (no-load state) rather than the open sector (zero-stress state). The residual strain is taken into account by analytic calculation and the incompressibility condition is enforced with Lagrange penalty method. Axisymmetric finite element analyses are conducted to demonstrate potential applications of this approach in a complex boundary value problem where angioplasty balloon interacts with the vessel wall. The model predictions of transmural circumferential and compressive radial stress distributions were also validated against an exponential-type Fung model, and the mean error was found to be within 6%. PMID:21689665

The Corrosion Protection of Magnesium Alloy AZ31B

NASA Technical Reports Server (NTRS)

Danford, M. D.; Mendrek, M. J.; Mitchell, M. L.; Torres, P. D.

1997-01-01

Corrosion rates for bare and coated Magnesium alloy AZ31B have been measured. Two coatings, Dow-23(Trademark) and Tagnite(Trademark), have been tested by electrochemical methods and their effectiveness determined. Electrochemical methods employed were the scanning reference electrode technique (SRET), the polarization resistance technique (PR) and the electrochemical impedance spectroscopy technique (EIS). In addition, general corrosion and stress corrosion methods were employed to examine the effectiveness of the above coatings in 90 percent humidity. Results from these studies are presented.

An Experimental Weight Function Method for Stress Intensity Factor Calibration.

DTIC Science & Technology

1980-04-01

in accuracy to the ones obtained by Macha (Reference 10) for the laser interferometry technique. The values of KI from the interpolating polynomial...Measurement. Air Force Material Laboratories, AFML-TR-74-75, July 1974. 10. D. E. Macha , W. N. Sharpe Jr., and A. F. Grandt Jr., A Laser Interferometry

Corrosion Studies of Wrought and Cast NASA-23 Alloy

NASA Technical Reports Server (NTRS)

Danford, M. D.

1997-01-01

Corrosion studies were carried out for wrought and cast NASA-23 alloy using electrochemical methods. The scanning reference electrode technique (SRET), the polarization resistance technique (PR), and the electrochemical impedance spectroscopy (EIS) were employed. These studies corroborate the findings of stress corrosion studies performed earlier, in that the material is highly resistant to corrosion.

Recommended reference genes for quantitative PCR analysis in soybean have variable stabilities during diverse biotic stresses

USDA-ARS?s Scientific Manuscript database

For real-time reverse transcription-PCR (qRT-PCR) in soybean, reference genes in different tissues, developmental stages, various cultivars, and under stress conditions have been suggested but their usefulness for research on soybean under various biotic stresses occurring in North-Central U.S. is n...

Completed Beltrami-Michell formulation for analyzing mixed boundary value problems in elasticity

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Kaljevic, Igor; Hopkins, Dale A.; Saigal, Sunil

1995-01-01

In elasticity, the method of forces, wherein stress parameters are considered as the primary unknowns, is known as the Beltrami-Michell formulation (BMF). The existing BMF can only solve stress boundary value problems; it cannot handle the more prevalent displacement of mixed boundary value problems of elasticity. Therefore, this formulation, which has restricted application, could not become a true alternative to the Navier's displacement method, which can solve all three types of boundary value problems. The restrictions in the BMF have been alleviated by augmenting the classical formulation with a novel set of conditions identified as the boundary compatibility conditions. This new method, which completes the classical force formulation, has been termed the completed Beltrami-Michell formulation (CBMF). The CBMF can solve general elasticity problems with stress, displacement, and mixed boundary conditions in terms of stresses as the primary unknowns. The CBMF is derived from the stationary condition of the variational functional of the integrated force method. In the CBMF, stresses for kinematically stable structures can be obtained without any reference to the displacements either in the field or on the boundary. This paper presents the CBMF and its derivation from the variational functional of the integrated force method. Several examples are presented to demonstrate the applicability of the completed formulation for analyzing mixed boundary value problems under thermomechanical loads. Selected example problems include a cylindrical shell wherein membrane and bending responses are coupled, and a composite circular plate.

Automation and Job Satisfaction among Reference Librarians.

ERIC Educational Resources Information Center

Whitlatch, Jo Bell

1991-01-01

Discussion of job satisfaction and the level of job performance focuses on the effect of automation on job satisfaction among reference librarians. The influence of stress is discussed, a job strain model is explained, and examples of how to design a job to reduce the stress caused by automation are given. (12 references) (LRW)

Ultrasonic angle beam standard reflector. [ultrasonic nondestructive inspection

NASA Technical Reports Server (NTRS)

Berry, R. F., Jr. (Inventor)

1985-01-01

A method that provides an impression profile in a reference standard material utilized in inspecting critically stressed components with pulsed ultrasound is described. A die stamp having an I letter is used to impress the surface of a reference material. The die stamp is placed against the surface and struck with an inertia imparting member to impress the I in the reference standard material. Upset may appear on the surface as a result of the impression and is removed to form a smooth surface. The stamping and upset removal is repeated until the entire surface area of a depth control platform on the die stamp uniformly contacts the material surface. The I impression profile in the reference standard material is utilized for reflecting pulsed ultrasonic beams for inspection purposes.

Deformation Failure Characteristics of Coal Body and Mining Induced Stress Evolution Law

PubMed Central

Wen, Zhijie; Wen, Jinhao; Shi, Yongkui; Jia, Chuanyang

2014-01-01

The results of the interaction between coal failure and mining pressure field evolution during mining are presented. Not only the mechanical model of stope and its relative structure division, but also the failure and behavior characteristic of coal body under different mining stages are built and demonstrated. Namely, the breaking arch and stress arch which influence the mining area are quantified calculated. A systematic method of stress field distribution is worked out. All this indicates that the pore distribution of coal body with different compressed volume has fractal character; it appears to be the linear relationship between propagation range of internal stress field and compressed volume of coal body and nonlinear relationship between the range of outburst coal mass and the number of pores which is influenced by mining pressure. The results provide theory reference for the research on the range of mining-induced stress and broken coal wall. PMID:24967438

Mechanical Twinning and Microstructures in Experimentally Stressed Quartzite

NASA Astrophysics Data System (ADS)

Minor, A.; Sintubin, M.; Wenk, H. R.; Rybacki, E.

2015-12-01

Since Dauphiné twins in quartz have been identified as a stress-related intracrystalline microstructure, several electron backscatter diffraction (EBSD) studies revealed that Dauphiné twins are present in naturally deformed quartz-bearing rocks in a wide range of tectono-metamorphic conditions. EBSD studies on experimentally stressed quartzite showed that crystals with particular crystallographic orientations contain many Dauphiné twin boundaries, while neighboring crystals with different orientations are largely free of twin boundaries. To understand the relationship between stress direction and orientation of Dauphiné twinned quartz crystals, a detailed EBSD study was performed on experimentally stressed quartzite samples and compared with an undeformed reference sample. We stressed 4 cylindrical samples in triaxial compression in a Paterson type gas deformation apparatus at GFZ Potsdam. Experimental conditions were 300MPa confining pressure, 500°C temperature and axial stresses of 145MPa, 250MPa and 460MPa for about 30 hours, resulting in a minor strain <0.04%. EBSD scans were obtained with a Zeiss Evo scanning electron microscope and TSL software at UC Berkeley. The EBSD maps show that Dauphiné twinning is present in the starting material as well as in experimentally stressed samples. Pole figures of the bulk orientation of the reference sample compared with stressed samples show a significant difference regarding the distribution for the r and z directions. The reference sample shows an indistinct maximum for r and z, whereas the stressed samples show a maximum for r poles and a minimum for z poles in the axial stress direction. EBSD scans of the reference and stressed samples were further analyzed manually to identify the orientations of single grains, which are free of twin boundaries and those, which contain twin boundaries. This analysis aims to quantify the relationship of crystal orientation and stress magnitude to initiate mechanical twinning.

Bending moment evaluation of a long specimen using a radial speckle pattern interferometer in combination with relaxation methods

NASA Astrophysics Data System (ADS)

Pacheco, Anderson; Fontana, Filipe; Viotti, Matias R.; Veiga, Celso L. N.; Lothhammer, Lívia R.; Albertazzi G., Armando, Jr.

2015-08-01

The authors developed an achromatic speckle pattern interferometer able to measure in-plane displacements in polar coordinates. It has been used to measure combined stresses resulting from the superposition of mechanical loading and residual stresses. Relaxation methods have been applied to produce on the surface of the specimen a displacement field that can be used to determine the amount of combined stresses. Two relaxation methods are explored in this work: blind hole-drilling and indentation. The first one results from a blind hole drilled with a high-speed drilling unit in the area of interest. The measured displacement data is fitted in an appropriate model to quantify the stress level using an indirect approach based on a set of finite element coefficients. The second approach uses indentation, where a hard spherical tip is firmly pressed against the surface to be measured with a predetermined indentation load. A plastic flow occurs around the indentation mark producing a radial in-plane displacement field that is related to the amount of combined stresses. Also in this case, displacements are measured by the radial interferometer and used to determine the stresses by least square fitting it to a displacement field determined by calibration. Both approaches are used to quantify the amount of bending stresses and moment in eight sections of a 12 m long 200 mm diameter steel pipe submitted to a known transverse loading. Reference values of bending stresses are also determined by strain gauges. The comparison between the four results is discussed in the paper.

Evaluating the adequacy of a reference site pool for ecological assessments in environmentally complex regions

USGS Publications Warehouse

Ode, Peter R.; Rehn, Andrew C.; Mazor, Raphael D.; Schiff, Kenneth C.; Stein, Eric D.; May, Jason; Brown, Larry R.; Herbst, David B.; Gillette, D.D.; Lunde, Kevin; Hawkins, Charles P.

2016-01-01

Many advances in the field of bioassessment have focused on approaches for objectively selecting the pool of reference sites used to establish expectations for healthy waterbodies, but little emphasis has been placed on ways to evaluate the suitability of the reference-site pool for its intended applications (e.g., compliance assessment vs ambient monitoring). These evaluations are critical because an inadequately evaluated reference pool may bias assessments in some settings. We present an approach for evaluating the adequacy of a reference-site pool for supporting biotic-index development in environmentally heterogeneous and pervasively altered regions. We followed common approaches for selecting sites with low levels of anthropogenic stress to screen 1985 candidate stream reaches to create a pool of 590 reference sites for assessing the biological integrity of streams in California, USA. We assessed the resulting pool of reference sites against 2 performance criteria. First, we evaluated how well the reference-site pool represented the range of natural gradients present in the entire population of streams as estimated by sites sampled through probabilistic surveys. Second, we evaluated the degree to which we were successful in rejecting sites influenced by anthropogenic stress by comparing biological metric scores at reference sites with the most vs fewest potential sources of stress. Using this approach, we established a reference-site pool with low levels of human-associated stress and broad coverage of environmental heterogeneity. This approach should be widely applicable and customizable to particular regional or programmatic needs.

In vivo labeling and specific magnetic bead separation of RNA for biofilm characterization and stress-induced gene expression analysis in bacteria.

PubMed

Stankiewicz, Nikolai; Gold, Andrea; Yüksel, Yousra; Berensmeier, Sonja; Schwartz, Thomas

2009-12-01

The method of in vivo labeling and separation of bacterial RNA was developed as an approach to elucidating the stress response of natural bacterial populations. This technique is based on the incorporation of digoxigenin-11-uridine-5'-triphosphate (DIG-11-UTP) in the RNA of active bacteria. The digoxigenin fulfills a dual role as a label of de novo synthesized RNA and a target for magnetic bead separation from a total RNA extract. Depending on the growth conditions and the population's composition, the assembly rate of DIG-11-UTP ranged from 1.2% to 12.5% of the total RNA in gram-positive and gram-negative reference bacteria as well as in natural biofilms from drinking water, surface water, and lake sediment. Separation of DIG-RNA from total RNA extracts was performed with a biotinylated anti-digoxigenin antibody and streptavidin-functionalized magnetic particles. The average separation yield from total RNA extracts was about 95% of labeled RNA. The unspecific bindings of non-labeled nucleic acids were smaller than 0.2%, as was evaluated by spiking experiments with an unmarked DNA amplicon. Applicability of the method developed was demonstrated by rRNA-directed PCR-DGGE population analysis of natural biofilms and expression profiling of two stress-induced genes (vanA and rpoS) in reference bacteria.

Monitoring the fracture behavior of SiCp/Al alloy composites using infrared lock-in thermography

NASA Astrophysics Data System (ADS)

Kordatos, E. Z.; Myriounis, D., P.; Hasan, S., T.; Matikas, T. E.

2009-03-01

his work deals with the study of fracture behavior of silicon carbide particle-reinforced (SiCp) A359 aluminum alloy matrix composites using an innovative nondestructive method based on lock-in thermography. The heat wave, generated by the thermo-mechanical coupling and the intrinsic energy dissipated during mechanical cyclic loading of the sample, was detected by an infrared camera. The coefficient of thermo-elasticity allows for the transformation of the temperature profiles into stresses. A new procedure was developed to determine the crack growth rate using thermographic mapping of the material undergoing fatigue: (a) The distribution of temperature and stresses at the surface of the specimen was monitored during the test. To this end, thermal images were obtained as a function of time and saved in the form of a movie. (b) The stresses were evaluated in a post-processing mode, along a series of equally spaced reference lines of the same length, set in front of the crack-starting notch. The idea was that the stress monitored at the location of a line versus time (or fatigue cycles) would exhibit an increase while the crack approaches the line, then attain a maximum when the crack tip was on the line. Due to the fact that the crack growth path could not be predicted and was not expected to follow a straight line in front of the notch, the stresses were monitored along a series of lines of a certain length, instead of a series of equally spaced points in front of the notch. The exact path of the crack could be easily determined by looking at the stress maxima along each of these reference lines. The thermographic results on the crack growth rate of the metal matrix composite (MMC) samples with three different heat treatments were correlated with measurements obtained by the conventional compliance method, and found to be in agreement.

Identification of reference genes for RT-qPCR in the Antarctic moss Sanionia uncinata under abiotic stress conditions

PubMed Central

Park, Mira; Hong, Soon Gyu; Park, Hyun; Lee, Byeong-ha

2018-01-01

Sanionia uncinata is a dominant moss species in the maritime Antarctic. Due to its high adaptability to harsh environments, this extremophile plant has been considered a good target for studying the molecular adaptation mechanisms of plants to a variety of environmental stresses. Despite the importance of S. uncinata as a representative Antarctic plant species for the identification and characterization of genes associated with abiotic stress tolerance, suitable reference genes, which are critical for RT-qPCR analyses, have not yet been identified. In this report, 11 traditionally used and 6 novel candidate reference genes were selected from transcriptome data of S. uncinata and the expression stability of these genes was evaluated under various abiotic stress conditions using three statistical algorithms; geNorm, NormFinder, and BestKeeper. The stability ranking analysis selected the best reference genes depending on the stress conditions. Among the 17 candidates, the most stable references were POB1 and UFD2 for cold stress, POB1 and AKB for drought treatment, and UFD2 and AKB for the field samples from a different water contents in Antarctica. Overall, novel genes POB1 and AKB were the most reliable references across all samples, irrespective of experimental conditions. In addition, 6 novel candidate genes including AKB, POB1 and UFD2, were more stable than the housekeeping genes traditionally used for internal controls, indicating that transcriptome data can be useful for identifying novel robust normalizers. The reference genes validated in this study will be useful for improving the accuracy of RT-qPCR analysis for gene expression studies of S. uncinata in Antarctica and for further functional genomic analysis of bryophytes. PMID:29920565

A sensitive LC-MS/MS method for the quantification of urinary 8-iso-prostaglandin F2α (8-iso-PGF2α) including pediatric reference interval.

PubMed

Xiao, Yi; Fu, Xiaowei; Pattengale, Paul; Dien Bard, Jennifer; Xu, Yan-Kang; O'Gorman, Maurice R

2016-09-01

Oxidative stress has been implicated in numerous diseases, including arthritis, atherosclerosis, Alzheimer's disease, cancer, diabetes, hypertension, and inflammation. 8-iso-prostaglandin F2α, a member of the F2 isoprostane family, has been well-accepted as a valuable biomarker for the assessment of oxidative stress. We report the development and validation of an ultra-sensitive LC-MS/MS assay for urinary 8-iso-PGF2α measurements in pediatric population. The assay was linear from 0.024 to 20nmol/l (R(2)=0.99). Recoveries were above 85% and matrix effects were below 5%. The variability was determined at nmol/l concentration: the intra-day variability (%CV) ranged from 3.9% to 4.5% (n=20); and the inter-day variability ranged from 4.3% to 5.7% (n=20). The accuracy of our laboratory developed test was evaluated with a clinical reference laboratory (n=39), and a correlation coefficient of 0.9257 was observed. Reference interval were established to be <0.5ng/mg creatinine in a group of pediatric population (2months-18years, n=123). The precision of the assay will allow for accurate assessment of oxidative stress, and is acceptable for patient testing, particularly in pediatric population. Copyright © 2016 Elsevier B.V. All rights reserved.

Determination of Residual Stress in Composite Materials Using Ultrasonic Waves

NASA Technical Reports Server (NTRS)

Rokhlin, S. I.

1997-01-01

The performance of high temperature composites can be significantly affected by the presence of residual stresses. These stresses arise during cooling processes from fabrication to room temperature due to mismatch of thermal expansion coefficients between matrix and fiber materials. This effect is especially pronounced in metal matrix and intermetallic composites. It can lead to plastic deformations, matrix cracking and fiber/matrix interface debonding. In this work the feasibility of ultrasonic techniques for residual stress assessment in composites is addressed. A novel technique for absolute stress determination in orthotropic materials from angular dependencies of ultrasonic velocities is described. The technique is applicable for determination of both applied and residual stresses and does not require calibration measurements on a reference sample. The important advantage of this method is that stress is determined simultaneously with stress-dependent elastic constants and is thus decoupled from the material texture. It is demonstrated that when the principal plane stress directions coincide with acoustical axes, the angular velocity data in the plane perpendicular to the stress plane may be used to determine both stress components. When the stress is off the acoustical axes, the shear and the difference of the normal stress components may be determined from the angular dependence of group velocities in the plane of stresses. Synthetic sets of experimental data corresponding to materials with different anisotropy and stress levels are used to check the applicability of the technique. The method is also verified experimentally. A high precision ultrasonic wave transmission technique is developed to measure angular dependence of ultrasonic velocities. Examples of stress determination from experimental velocity data are given. A method is presented for determination of velocities of ultrasonic waves propagating through the composite material with residual stresses. It is based on the generalized self-consistent multiple scattering model. Calculation results for longitudinal and shear ultrasonic wave velocities propagating perpendicular to the fibers direction in SCS-6/Ti composite with and without residual stresses are presented. They show that velocity changes due to presence of stresses are of order 1%.

Assessing Beaked Whale Reproduction and Stress Response Relative to Sonar Activity at the Atlantic Undersea Test and Evaluation Center (AUTEC)

DTIC Science & Technology

2015-09-30

oil spills (unpublished data, Kellar). The second will be to conduct a more fine-scale analysis of the areas examined during this study. For this...REFERENCES Carlin BP , Chib S (1995) Bayesian model choice via Markov-chain Monte-Carlo methods. Journal of the Royal Statistical Society

Transcriptome-Wide Identification of Reference Genes for Expression Analysis of Soybean Responses to Drought Stress along the Day.

PubMed

Marcolino-Gomes, Juliana; Rodrigues, Fabiana Aparecida; Fuganti-Pagliarini, Renata; Nakayama, Thiago Jonas; Ribeiro Reis, Rafaela; Bouças Farias, Jose Renato; Harmon, Frank G; Correa Molinari, Hugo Bruno; Correa Molinari, Mayla Daiane; Nepomuceno, Alexandre

2015-01-01

The soybean transcriptome displays strong variation along the day in optimal growth conditions and also in response to adverse circumstances, like drought stress. However, no study conducted to date has presented suitable reference genes, with stable expression along the day, for relative gene expression quantification in combined studies on drought stress and diurnal oscillations. Recently, water deficit responses have been associated with circadian clock oscillations at the transcription level, revealing the existence of hitherto unknown processes and increasing the demand for studies on plant responses to drought stress and its oscillation during the day. We performed data mining from a transcriptome-wide background using microarrays and RNA-seq databases to select an unpublished set of candidate reference genes, specifically chosen for the normalization of gene expression in studies on soybean under both drought stress and diurnal oscillations. Experimental validation and stability analysis in soybean plants submitted to drought stress and sampled during a 24 h timecourse showed that four of these newer reference genes (FYVE, NUDIX, Golgin-84 and CYST) indeed exhibited greater expression stability than the conventionally used housekeeping genes (ELF1-β and β-actin) under these conditions. We also demonstrated the effect of using reference candidate genes with different stability values to normalize the relative expression data from a drought-inducible soybean gene (DREB5) evaluated in different periods of the day.

Correction for Metastability in the Quantification of PID in Thin-film Module Testing: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hacke, Peter L; Johnston, Steven; Spataru, Sergiu

A fundamental change in the analysis for the accelerated stress testing of thin-film modules is proposed, whereby power changes due to metastability and other effects that may occur due to the thermal history are removed from the power measurement that we obtain as a function of the applied stress factor. The power of reference modules normalized to an initial state - undergoing the same thermal and light- exposure history but without the applied stress factor such as humidity or voltage bias - is subtracted from that of the stressed modules. For better understanding and appropriate application in standardized tests, themore » method is demonstrated and discussed for potential-induced degradation testing in view of the parallel-occurring but unrelated physical mechanisms that can lead to confounding power changes in the module.« less

Selection of Suitable Reference Genes for RT-qPCR Normalization under Abiotic Stresses and Hormone Stimulation in Persimmon (Diospyros kaki Thunb)

PubMed Central

Wang, Peihong; Xiong, Aisheng; Gao, Zhihong; Yu, Xinyi; Li, Man; Hou, Yingjun; Sun, Chao; Qu, Shenchun

2016-01-01

The success of quantitative real-time reverse transcription polymerase chain reaction (RT-qPCR) to quantify gene expression depends on the stability of the reference genes used for data normalization. To date, systematic screening for reference genes in persimmon (Diospyros kaki Thunb) has never been reported. In this study, 13 candidate reference genes were cloned from 'Nantongxiaofangshi' using information available in the transcriptome database. Their expression stability was assessed by geNorm and NormFinder algorithms under abiotic stress and hormone stimulation. Our results showed that the most suitable reference genes across all samples were UBC and GAPDH, and not the commonly used persimmon reference gene ACT. In addition, UBC combined with RPII or TUA were found to be appropriate for the "abiotic stress" group and α-TUB combined with PP2A were found to be appropriate for the "hormone stimuli" group. For further validation, the transcript level of the DkDREB2C homologue under heat stress was studied with the selected genes (CYP, GAPDH, TUA, UBC, α-TUB, and EF1-α). The results suggested that it is necessary to choose appropriate reference genes according to the test materials or experimental conditions. Our study will be useful for future studies on gene expression in persimmon. PMID:27513755

Reference intervals for serum reactive oxygen metabolites, biological antioxidant potential, and oxidative stress index in adult rams.

PubMed

Oikonomidis, Ioannis L; Kiosis, Evangelos A; Brozos, Christos N; Kritsepi-Konstantinou, Maria G

2017-03-01

OBJECTIVE To establish reference intervals for serum reactive oxygen metabolites (ROMs), biological antioxidant potential (BAP), and oxidative stress index (OSi) in adult rams by use of controlled preanalytic and analytic procedures. ANIMALS 123 healthy 1- to 4-year-old rams of 2 Greek breeds (Chios [n = 62] and Florina [61]). PROCEDURES 4 hours after rams were fed, a blood sample was obtained from each ram, and serum was harvested. Concentrations of ROMs and BAP were measured colorimetrically on a spectrophotometric analyzer. The OSi was calculated as ROMs concentration divided by BAP concentration. Combined and breed-specific reference intervals were calculated by use of nonparametric and robust methods, respectively. Reference intervals were defined as the 2.5th to 97.5th percentiles. RESULTS Reference intervals for ROMs, BAP, and OSi for all rams combined were 65 to 109 Carratelli units, 2,364 to 4,491 μmol/L, and 18.2 to 43.0 Carratelli units/(mmol/L), respectively. Reference intervals of Chios rams for ROMs, BAP, and OSi were 56 to 113 Carratelli units, 2,234 to 4,290 μmol/L, and 12.9 to 38.4 Carratelli units/(mmol/L), respectively. Reference intervals of Florina rams for ROMs, BAP, and OSi were 68 to 111 Carratelli units, 2,337 to 4,363 μmol/L, and 14.1 to 38.1 Carratelli units/(mmol/L), respectively. CONCLUSIONS AND CLINICAL RELEVANCE Reference intervals calculated in this study can be used as a guide for the interpretation of ROMs, BAP, and OSi results in rams and, under appropriate conditions, can be adopted for use by veterinary laboratories.

The Influence of the In-Situ Clad Staining on the Corrosion of Zircaloy in PWR Water Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kammenzind, B.F., Eklund, K.L. and Bajaj, R.

Zircaloy cladding tubes strain in-situ during service life in the corrosive environment of a Pressurized Water Reactor for a variety of reasons. First, the tube undergoes stress free growth due to the preferential alignment of irradiation induced vacancy loops on basal planes. Positive strains develop in the textured tubes along prism orientations while negative strains develop along basal orientations (Reference (a)). Second, early in life, free standing tubes will often shrink by creep in the diametrical direction under the external pressure of the water environment, but potentially grow later in life in the diametrical direction once the expanding fuel pelletmore » contacts the cladding inner wall (Reference (b)). Finally, the Zircaloy cladding absorbs hydrogen as a by product of the corrosion reaction (Reference (c)). Once above the solubility limit in Zircaloy, the hydride precipitates as zirconium hydride (References (c) through (j)). Both hydrogen in solid solution and precipitated as Zirconium hydride cause a volume expansion of the Zircaloy metal (Reference (k)). Few studies are reported on that have investigated the influence that in-situ clad straining has on corrosion of Zircaloy. If Zircaloy corrosion rates are governed by diffusion of anions through a thin passivating boundary layer at the oxide-to-metal interface (References (l) through (n)), in-situ straining of the cladding could accelerate the corrosion process by prematurely breaking that passivating oxide boundary layer. References (o) through (q) investigated the influence that an applied tensile stress has on the corrosion resistance of Zircaloy. Knights and Perkins, Reference (o), reported that the applied tensile stress increased corrosion rates above a critical stress level in 400 C and 475 C steam, but not at lower temperatures nor in dry oxygen environments. This latter observation suggested that hydrogen either in the oxide or at the oxide-to-metal interface is involved in the observed stress effect. Kim et al. (Reference (p)) and Kim and Kim (Reference (q)) more recently investigated the influence that an applied hoop stress has on the corrosion resistance of Zircaloy tubes in a 400 C steam and in a 350 C concentrated lithia water environment. Both of these studies found the applied tensile hoop stress to have no effect on cladding corrosion rates in the 400 C steam environment but to have accelerated corrosion in the lithiated water environment. In both cases, the corrosion acceleration in the lithiated water environment was attributed to the accumulation of the increased hydrogen picked up in the lithiated environment into the tensile regions of the test specimen. Dense hydride rims have been shown, independent of clad strain, to accelerate the corrosion of Zirconium alloys (References (r) and (s)), suggesting that the primary effect of applied stresses on the corrosion of Zircaloy in the above studies is through the accumulation of hydrogen at the oxide-to-metal interface and not through a direct mechanical breakdown of the passivating boundary layer. To further investigate the potential role of in-situ clad straining (or stress) on Zircaloy corrosion rates, two experimental studies were performed. First, several samples that were irradiated with and without an applied stress were destructively examined for the extent of corrosion occurring in strained and nonstrained regions of the test samples. The extent of corrosion was determined, posttest, by metallographic examination. Second, the corrosion process was monitored in-situ using electrochemical impedance spectroscopy on samples exposed out-of-reactor with and without an applied stress. Post test, these autoclave samples were also metallographically examined.« less

Shape and Stress Sensing of Multilayered Composite and Sandwich Structures Using an Inverse Finite Element Method

NASA Technical Reports Server (NTRS)

Cerracchio, Priscilla; Gherlone, Marco; Di Sciuva, Marco; Tessler, Alexander

2013-01-01

The marked increase in the use of composite and sandwich material systems in aerospace, civil, and marine structures leads to the need for integrated Structural Health Management systems. A key capability to enable such systems is the real-time reconstruction of structural deformations, stresses, and failure criteria that are inferred from in-situ, discrete-location strain measurements. This technology is commonly referred to as shape- and stress-sensing. Presented herein is a computationally efficient shape- and stress-sensing methodology that is ideally suited for applications to laminated composite and sandwich structures. The new approach employs the inverse Finite Element Method (iFEM) as a general framework and the Refined Zigzag Theory (RZT) as the underlying plate theory. A three-node inverse plate finite element is formulated. The element formulation enables robust and efficient modeling of plate structures instrumented with strain sensors that have arbitrary positions. The methodology leads to a set of linear algebraic equations that are solved efficiently for the unknown nodal displacements. These displacements are then used at the finite element level to compute full-field strains, stresses, and failure criteria that are in turn used to assess structural integrity. Numerical results for multilayered, highly heterogeneous laminates demonstrate the unique capability of this new formulation for shape- and stress-sensing.

Orthodontic intrusion of maxillary incisors: a 3D finite element method study

PubMed Central

Saga, Armando Yukio; Maruo, Hiroshi; Argenta, Marco André; Maruo, Ivan Toshio; Tanaka, Orlando Motohiro

2016-01-01

Objective: In orthodontic treatment, intrusion movement of maxillary incisors is often necessary. Therefore, the objective of this investigation is to evaluate the initial distribution patterns and magnitude of compressive stress in the periodontal ligament (PDL) in a simulation of orthodontic intrusion of maxillary incisors, considering the points of force application. Methods: Anatomic 3D models reconstructed from cone-beam computed tomography scans were used to simulate maxillary incisors intrusion loading. The points of force application selected were: centered between central incisors brackets (LOAD 1); bilaterally between the brackets of central and lateral incisors (LOAD 2); bilaterally distal to the brackets of lateral incisors (LOAD 3); bilaterally 7 mm distal to the center of brackets of lateral incisors (LOAD 4). Results and Conclusions: Stress concentrated at the PDL apex region, irrespective of the point of orthodontic force application. The four load models showed distinct contour plots and compressive stress values over the midsagittal reference line. The contour plots of central and lateral incisors were not similar in the same load model. LOAD 3 resulted in more balanced compressive stress distribution. PMID:27007765

Diagnostic accuracy of stress perfusion CMR in comparison with quantitative coronary angiography: fully quantitative, semiquantitative, and qualitative assessment.

PubMed

Mordini, Federico E; Haddad, Tariq; Hsu, Li-Yueh; Kellman, Peter; Lowrey, Tracy B; Aletras, Anthony H; Bandettini, W Patricia; Arai, Andrew E

2014-01-01

This study's primary objective was to determine the sensitivity, specificity, and accuracy of fully quantitative stress perfusion cardiac magnetic resonance (CMR) versus a reference standard of quantitative coronary angiography. We hypothesized that fully quantitative analysis of stress perfusion CMR would have high diagnostic accuracy for identifying significant coronary artery stenosis and exceed the accuracy of semiquantitative measures of perfusion and qualitative interpretation. Relatively few studies apply fully quantitative CMR perfusion measures to patients with coronary disease and comparisons to semiquantitative and qualitative methods are limited. Dual bolus dipyridamole stress perfusion CMR exams were performed in 67 patients with clinical indications for assessment of myocardial ischemia. Stress perfusion images alone were analyzed with a fully quantitative perfusion (QP) method and 3 semiquantitative methods including contrast enhancement ratio, upslope index, and upslope integral. Comprehensive exams (cine imaging, stress/rest perfusion, late gadolinium enhancement) were analyzed qualitatively with 2 methods including the Duke algorithm and standard clinical interpretation. A 70% or greater stenosis by quantitative coronary angiography was considered abnormal. The optimum diagnostic threshold for QP determined by receiver-operating characteristic curve occurred when endocardial flow decreased to <50% of mean epicardial flow, which yielded a sensitivity of 87% and specificity of 93%. The area under the curve for QP was 92%, which was superior to semiquantitative methods: contrast enhancement ratio: 78%; upslope index: 82%; and upslope integral: 75% (p = 0.011, p = 0.019, p = 0.004 vs. QP, respectively). Area under the curve for QP was also superior to qualitative methods: Duke algorithm: 70%; and clinical interpretation: 78% (p < 0.001 and p < 0.001 vs. QP, respectively). Fully quantitative stress perfusion CMR has high diagnostic accuracy for detecting obstructive coronary artery disease. QP outperforms semiquantitative measures of perfusion and qualitative methods that incorporate a combination of cine, perfusion, and late gadolinium enhancement imaging. These findings suggest a potential clinical role for quantitative stress perfusion CMR. Copyright © 2014 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

[Improving industrial microbial stress resistance by metabolic engineering: a review].

PubMed

Fu, Ruiyan; Li, Yin

2010-09-01

Metabolic engineering is a technologic platform for industrial strain improvement and aims not only at modifying microbial metabolic fluxes, but also improving the physiological performance of industrial microbes. Microbes will meet multiple stresses in industrial processes. Consequently, elicited gene responses might result in a decrease in overall cell fitness and the efficiency of biotransformation. Thus, it is crucial to develop robust and productive microbial strains that can be integrated into industrial-scale bioprocesses. In this review, we focus on the progress of these novel methods and strategies for engineering stress-tolerance phenotypes referring to rational metabolic engineering and inverse metabolic engineering in recent years. In addition, we also address problems existing in this area and future research needs of microbial physiological functionality engineering.

The Reynolds-stress tensor in diffusion flames; An experimental and theoretical investigation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schneider, F.; Janicka, J.

1990-07-01

The authors present measurements and predictions of Reynolds-stress components and mean velocities in a CH{sub 4}-air diffusion flame. A reference beam LDA technique is applied for measuring all Reynolds-stress components. A hologram with dichromated gelatine as recording medium generates strictly coherent reference beams. The theoretical part describes a Reynolds-stress model based on Favre-averaged quantities, paying special attention to modeling the pressure-shear correlation and the dissipation equation in flames. Finally, measurement/prediction comparisons are presented.

Uncertainties in obtaining high reliability from stress-strength models

NASA Technical Reports Server (NTRS)

Neal, Donald M.; Matthews, William T.; Vangel, Mark G.

1992-01-01

There has been a recent interest in determining high statistical reliability in risk assessment of aircraft components. The potential consequences are identified of incorrectly assuming a particular statistical distribution for stress or strength data used in obtaining the high reliability values. The computation of the reliability is defined as the probability of the strength being greater than the stress over the range of stress values. This method is often referred to as the stress-strength model. A sensitivity analysis was performed involving a comparison of reliability results in order to evaluate the effects of assuming specific statistical distributions. Both known population distributions, and those that differed slightly from the known, were considered. Results showed substantial differences in reliability estimates even for almost nondetectable differences in the assumed distributions. These differences represent a potential problem in using the stress-strength model for high reliability computations, since in practice it is impossible to ever know the exact (population) distribution. An alternative reliability computation procedure is examined involving determination of a lower bound on the reliability values using extreme value distributions. This procedure reduces the possibility of obtaining nonconservative reliability estimates. Results indicated the method can provide conservative bounds when computing high reliability. An alternative reliability computation procedure is examined involving determination of a lower bound on the reliability values using extreme value distributions. This procedure reduces the possibility of obtaining nonconservative reliability estimates. Results indicated the method can provide conservative bounds when computing high reliability.

A curved surface micro-moiré method and its application in evaluating curved surface residual stress

NASA Astrophysics Data System (ADS)

Zhang, Hongye; Wu, Chenlong; Liu, Zhanwei; Xie, Huimin

2014-09-01

The moiré method is typically applied to the measurement of deformations of a flat surface while, for a curved surface, this method is rarely used other than for projection moiré or moiré interferometry. Here, a novel colour charge-coupled device (CCD) micro-moiré method has been developed, based on which a curved surface micro-moiré (CSMM) method is proposed with a colour CCD and optical microscope (OM). In the CSMM method, no additional reference grating is needed as a Bayer colour filter array (CFA) installed on the OM in front of the colour CCD image sensor performs this role. Micro-moiré fringes with high contrast are directly observed with the OM through the Bayer CFA under the special condition of observing a curved specimen grating. The principle of the CSMM method based on a colour CCD micro-moiré method and its application range and error analysis are all described in detail. In an experiment, the curved surface residual stress near a welded seam on a stainless steel tube was investigated using the CSMM method.

Reference Frames and Relativity.

ERIC Educational Resources Information Center

Swartz, Clifford

1989-01-01

Stresses the importance of a reference frame in mechanics. Shows the Galilean transformation in terms of relativity theory. Discusses accelerated reference frames and noninertial reference frames. Provides examples of reference frames with diagrams. (YP)

Identification of potential internal control genes for real-time PCR analysis during stress response in Pyropia haitanensis

NASA Astrophysics Data System (ADS)

Wang, Xia; Feng, Jianhua; Huang, Aiyou; He, Linwen; Niu, Jianfeng; Wang, Guangce

2017-11-01

Pyropia haitanensis has prominent stress-resistance characteristics and is endemic to China. Studies into the stress responses in these algae could provide valuable information on the stress-response mechanisms in the intertidal Rhodophyta. Here, the effects of salinity and light intensity on the quantum yield of photosystem II in Py. haitanensis were investigated using pulse-amplitude-modulation fluorometry. Total RNA and genomic DNA of the samples under different stress conditions were isolated. By normalizing to the genomic DNA quantity, the RNA content in each sample was evaluated. The cDNA was synthesized and the expression levels of seven potential internal control genes were evaluated using qRT-PCR method. Then, we used geNorm, a common statistical algorithm, to analyze the qRT-PCR data of seven reference genes. Potential genes that may constantly be expressed under different conditions were selected, and these genes showed stable expression levels in samples under a salinity treatment, while tubulin, glyceraldehyde-3-phosphate dehydrogenase and actin showed stability in samples stressed by strong light. Based on the results of the pulse amplitude-modulation fluorometry, an absolute quantification was performed to obtain gene copy numbers in certain stress-treated samples. The stably expressed genes as determined by the absolute quantification in certain samples conformed to the results of the geNorm screening. Based on the results of the software analysis and absolute quantification, we proposed that elongation factor 3 and 18S ribosomal RNA could be used as internal control genes when the Py. haitanensis blades were subjected to salinity stress, and that α-tubulin and 18S ribosomal RNA could be used as the internal control genes when the stress was from strong light. In general, our findings provide a convenient reference for the selection of internal control genes when designing experiments related to stress responses in Py. haitanensis.

A method to separate and quantify the effects of indentation size, residual stress and plastic damage when mapping properties using instrumented indentation

NASA Astrophysics Data System (ADS)

Hou, X. D.; Jennett, N. M.

2017-11-01

Instrumented indentation is a convenient and increasingly rapid method of high resolution mapping of surface properties. There is, however, significant untapped potential for the quantification of these properties, which is only possible by solving a number of serious issues that affect the absolute values for mechanical properties obtained from small indentations. The three most pressing currently are the quantification of: the indentation size effect (ISE), residual stress, and pile-up and sink-in—which is itself affected by residual stress and ISE. Hardness based indentation mapping is unable to distinguish these effects. We describe a procedure that uses an elastic modulus as an internal reference and combines the information available from an indentation modulus map, a hardness map, and a determination of the ISE coefficient (using self-similar geometry indentation) to correct for the effects of stress, pile up and the indentation size effect, to leave a quantified map of plastic damage and grain refinement hardening in a surface. This procedure is used to map the residual stress in a cross-section of the machined surface of a previously stress free metal. The effect of surface grinding is compared to milling and is shown to cause different amounts of work hardening, increase in residual stress, and surface grain size reduction. The potential use of this procedure for mapping coatings in cross-section is discussed.

Transient thermal stresses of work roll by coupled thermoelasticity

NASA Astrophysics Data System (ADS)

Lai, W. B.; Chen, T. C.; Weng, C. I.

1991-01-01

A numerical method, based on a two-dimensional plane strain model, is developed to predict the transient responses (that include distributions of temperature, thermal deformation, and thermal stress) of work roll during strip rolling by coupled thermoelasticity. The method consists of discretizing the space domain of the problem by finite element method first, and then treating the time domain by implicit time integration techniques. In order to avoid the difficulty in analysis due to relative movement between work roll and its thermal boundary, the energy equation is formulated with respect to a fixed Eulerian reference frame. The effect of thermoelastic coupling term, that is generally disregarded in strip rolling, can be considered and assessed. The influences of some important process parameters, such as rotational speed of the roll and intensity of heat flux, on transient solutions are also included and discussed. Furthermore, since the stress history at any point of the roll in both transient and steady state could be accurately evaluated, it is available to perform the analysis of thermal fatigue for the roll by means of previous data.

Psychophysiological effects of a web-based stress management system: a prospective, randomized controlled intervention study of IT and media workers [ISRCTN54254861].

PubMed

Hasson, Dan; Anderberg, Ulla Maria; Theorell, Töres; Arnetz, Bengt B

2005-07-25

The aim of the present study was to assess possible effects on mental and physical well-being and stress-related biological markers of a web-based health promotion tool. A randomized, prospectively controlled study was conducted with before and after measurements, involving 303 employees (187 men and 116 women, age 23-64) from four information technology and two media companies. Half of the participants were offered web-based health promotion and stress management training (intervention) lasting for six months. All other participants constituted the reference group. Different biological markers were measured to detect possible physiological changes. After six months the intervention group had improved statistically significantly compared to the reference group on ratings of ability to manage stress, sleep quality, mental energy, concentration ability and social support. The anabolic hormone dehydroepiandosterone sulphate (DHEA-S) decreased significantly in the reference group as compared to unchanged levels in the intervention group. Neuropeptide Y (NPY) increased significantly in the intervention group compared to the reference group. Chromogranin A (CgA) decreased significantly in the intervention group as compared to the reference group. Tumour necrosis factor alpha (TNFalpha) decreased significantly in the reference group compared to the intervention group. Logistic regression analysis revealed that group (intervention vs. reference) remained a significant factor in five out of nine predictive models. The results indicate that an automatic web-based system might have short-term beneficial physiological and psychological effects and thus might be an opportunity in counteracting some clinically relevant and common stress and health issues of today.

Patient-specific stress analyses in the ascending thoracic aorta using a finite-element implementation of the constrained mixture theory.

PubMed

Mousavi, S Jamaleddin; Avril, Stéphane

2017-10-01

It is now a rather common approach to perform patient-specific stress analyses of arterial walls using finite-element models reconstructed from gated medical images. However, this requires to compute for every Gauss point the deformation gradient between the current configuration and a stress-free reference configuration. It is technically difficult to define such a reference configuration, and there is actually no guarantee that a stress-free configuration is physically attainable due to the presence of internal stresses in unloaded soft tissues. An alternative framework was proposed by Bellini et al. (Ann Biomed Eng 42(3):488-502, 2014). It consists of computing the deformation gradients between the current configuration and a prestressed reference configuration. We present here the first finite-element results based on this concept using the Abaqus software. The reference configuration is set arbitrarily to the in vivo average geometry of the artery, which is obtained from gated medical images and is assumed to be mechanobiologically homeostatic. For every Gauss point, the stress is split additively into the contributions of each individual load-bearing constituent of the tissue, namely elastin, collagen, smooth muscle cells. Each constituent is assigned an independent prestretch in the reference configuration, named the deposition stretch. The outstanding advantage of the present approach is that it simultaneously computes the in situ stresses existing in the reference configuration and predicts the residual stresses that occur after removing the different loadings applied onto the artery (pressure and axial load). As a proof of concept, we applied it on an ideal thick-wall cylinder and showed that the obtained results were consistent with corresponding experimental and analytical results of the well-known literature. In addition, we developed a patient-specific model of a human ascending thoracic aneurysmal aorta and demonstrated the utility in predicting the wall stress distribution in vivo under the effects of physiological pressure. Finally, we simulated the whole process preceding traditional in vitro uniaxial tensile testing of arteries, including excision from the body, radial cutting, flattening and subsequent tensile loading, showing how this process may impact the final mechanical properties derived from these in vitro tests.

A new relative referencing method for crop monitoring using chlorophyll fluorescence

NASA Technical Reports Server (NTRS)

Norikane, J.; Goto, E.; Kurata, K.; Takakura, T.

2003-01-01

The measurement of plant chlorophyll fluorescence has been used for many years as a method to monitor a plant's health status. These types of methods have been mostly relegated to the laboratory. The newly developed Relative Referencing Method allows for the measurement of chlorophyll fluorescence under artificial lighting conditions. The fluorescence signal can be determined by first taking a reference signal measurement, then a second measurement with an additional fluorescence excitation source. The first signal can then be subtracted from the second and the plant's chlorophyll fluorescence due to the second lighting source can be determined. With this simple approach, a photosynthesizing plant can be monitored to detect signs of water stress. Using this approach experiments on tomato plants have shown that it was possible to detect water stress, while the plants were continuously illuminated by fluorescent lamps. This method is a promising tool for the remote monitoring of crops grown in a CELSS-type application. Published by Elsevier Science Ltd on behalf of COSPAR.

Role stress amongst nurses at the workplace: concept analysis.

PubMed

Riahi, Sanaz

2011-09-01

The present study explicates the concept of role stress amongst nurses through an analysis adopted from Walker and Avant; Strategies for Theory Construction in Nursing, 4th edn, Prentice Hall, New Jersey, NY. Role stress has become a significant problem amongst nurses and has created much distress leading to burnout among many in the nursing profession. It is significant to analyse the concept of role stress and its relative attributes and consequences, in order to recognize the necessary antecedents needed to create better conditions for nurses at the workplace. A modified method developed by Walker and Avant was used for this concept analysis. A model representing the concept of role stress was developed through careful consideration of the attributes, consequences, antecedents and empirical referents of role stress. The concept analysis of role stress among nurses at the workplace recognized the vulnerability of the nursing discipline towards burnout and distress in general. It is critical to be aware of the current state of health care and note the increased workload created for nurses. Nurses are at a greater vulnerability for role stress, making it imperative for health care organizations to critically evaluate and establish preventative measures for the concept of role stress. 2011 Blackwell Publishing Ltd.

Parental stress and perceived vulnerability at 5 and 10 years after pediatric SCT.

PubMed

Vrijmoet-Wiersma, C M J; Egeler, R M; Koopman, H M; Bresters, D; Norberg, A L; Grootenhuis, M A

2010-06-01

With the aim of assessing parental stress after SCT, 73 parents of children and adolescents who underwent SCT 5 or 10 years ago responded to questionnaires on general distress (General Health Questionnaire (GHQ)), disease-related stress (Pediatric Inventory for Parents-short form (PIP-SF)) and perceptions of child vulnerability (Child Vulnerability Scale (CVS)). General distress scores were comparable with the reference groups, but 40% of the mothers at 5 years after SCT reported increased stress levels as compared with 26% in the community-based reference group. Disease-related stress was comparable with the reference group of parents of children who were just off cancer treatment, 5 years after SCT. At 10 years after SCT, scores were lower than the reference group. Perceived child vulnerability did diminish over time, but remained high in parents of SCT survivors, compared with parents of healthy children: 96% of the parents at 5 years after SCT and 76% of the parents at 10 years after SCT scored above the cutoff point. Perceived vulnerability was found to be a predictor for parental disease-related stress. To conclude, although most parents of SCT survivors are resilient, the majority of parents perceive their child to be much more vulnerable as compared with parents of healthy children. This perception is associated with disease-related stress and may induce overprotective parenting.

Validation of Reference Genes for Relative Quantitative Gene Expression Studies in Cassava (Manihot esculenta Crantz) by Using Quantitative Real-Time PCR

PubMed Central

Hu, Meizhen; Hu, Wenbin; Xia, Zhiqiang; Zhou, Xincheng; Wang, Wenquan

2016-01-01

Reverse transcription quantitative real-time polymerase chain reaction (real-time PCR, also referred to as quantitative RT-PCR or RT-qPCR) is a highly sensitive and high-throughput method used to study gene expression. Despite the numerous advantages of RT-qPCR, its accuracy is strongly influenced by the stability of internal reference genes used for normalizations. To date, few studies on the identification of reference genes have been performed on cassava (Manihot esculenta Crantz). Therefore, we selected 26 candidate reference genes mainly via the three following channels: reference genes used in previous studies on cassava, the orthologs of the most stable Arabidopsis genes, and the sequences obtained from 32 cassava transcriptome sequence data. Then, we employed ABI 7900 HT and SYBR Green PCR mix to assess the expression of these genes in 21 materials obtained from various cassava samples under different developmental and environmental conditions. The stability of gene expression was analyzed using two statistical algorithms, namely geNorm and NormFinder. geNorm software suggests the combination of cassava4.1_017977 and cassava4.1_006391 as sufficient reference genes for major cassava samples, the union of cassava4.1_014335 and cassava4.1_006884 as best choice for drought stressed samples, and the association of cassava4.1_012496 and cassava4.1_006391 as optimal choice for normally grown samples. NormFinder software recommends cassava4.1_006884 or cassava4.1_006776 as superior reference for qPCR analysis of different materials and organs of drought stressed or normally grown cassava, respectively. Results provide an important resource for cassava reference genes under specific conditions. The limitations of these findings were also discussed. Furthermore, we suggested some strategies that may be used to select candidate reference genes. PMID:27242878

Selection and validation of reference genes for qRT-PCR analysis during biological invasions: The thermal adaptability of Bemisia tabaci MED.

PubMed

Dai, Tian-Mei; Lü, Zhi-Chuang; Liu, Wan-Xue; Wan, Fang-Hao

2017-01-01

The Bemisia tabaci Mediterranean (MED) cryptic species has been rapidly invading to most parts of the world owing to its strong ecological adaptability, which is considered as a model insect for stress tolerance studies under rapidly changing environments. Selection of a suitable reference gene for quantitative stress-responsive gene expression analysis based on qRT-PCR is critical for elaborating the molecular mechanisms of thermotolerance. To obtain accurate and reliable normalization data in MED, eight candidate reference genes (β-act, GAPDH, β-tub, EF1-α, GST, 18S, RPL13A and α-tub) were examined under various thermal stresses for varied time periods by using geNorm, NormFinder and BestKeeper algorithms, respectively. Our results revealed that β-tub and EF1-α were the best reference genes across all sample sets. On the other hand, 18S and GADPH showed the least stability for all the samples studied. β-act was proved to be highly stable only in case of short-term thermal stresses. To our knowledge this was the first comprehensive report on validation of reference genes under varying temperature stresses in MED. The study could expedite particular discovery of thermotolerance genes in MED. Further, the present results can form the basis of further research on suitable reference genes in this invasive insect and will facilitate transcript profiling in other invasive insects.

NASALIFE - Component Fatigue and Creep Life Prediction Program

NASA Technical Reports Server (NTRS)

Gyekenyesi, John Z.; Murthy, Pappu L. N.; Mital, Subodh K.

2014-01-01

NASALIFE is a life prediction program for propulsion system components made of ceramic matrix composites (CMC) under cyclic thermo-mechanical loading and creep rupture conditions. Although the primary focus was for CMC components, the underlying methodologies are equally applicable to other material systems as well. The program references empirical data for low cycle fatigue (LCF), creep rupture, and static material properties as part of the life prediction process. Multiaxial stresses are accommodated by Von Mises based methods and a Walker model is used to address mean stress effects. Varying loads are reduced by the Rainflow counting method or a peak counting type method. Lastly, damage due to cyclic loading and creep is combined with Minor's Rule to determine damage due to cyclic loading, damage due to creep, and the total damage per mission and the number of potential missions the component can provide before failure.

Stress and quality of life among parents of children with congenital heart disease referred for psychological services.

PubMed

Kaugars, Astrida; Shields, Clarissa; Brosig, Cheryl

2018-01-01

The study examined parent stress and health-related quality of life (HRQOL) among families of children with congenital heart disease (CHD) referred for psychological services. Parents of 54 children (85% boys) aged 3 to 13 (M age  = 7.48, SD = 2.38) completed measures to assess parenting stress (Parenting Stress Index - Short Form; Pediatric Inventory for Parents) and the PedsQL Family Impact Module. Medical information was retrieved from medical record review. Half of parents of children with single ventricle anatomy had clinically significant levels of parenting stress. Parents of children with single ventricle anatomy reported more frequent illness-related stress and more difficulty dealing with illness-related stress than parents of children with two ventricle anatomy. Younger gestational age at birth and referral for attention or behavior problems were associated with greater likelihood of parent at-risk psychosocial functioning. Among children referred for psychological services, many parents report significant stress and significant negative impact of the child's medical condition on the family. Results underscore the need to consider assessing parent psychosocial functioning and providing additional support for parents of children with CHD. © 2017 Wiley Periodicals, Inc.

30 CFR 250.901 - What industry standards must your platform meet?

Code of Federal Regulations, 2011 CFR

2011-07-01

...? 250.901 Section 250.901 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION, AND... Constructing Fixed Offshore Platforms—Working Stress Design (incorporated by reference as specified in § 250... Stress Cracking Resistant Metallic Materials for Oilfield Equipment, (incorporated by reference as...

Chronic Stress During Adolescence Impairs and Improves Learning and Memory in Adulthood

PubMed Central

Chaby, Lauren E.; Cavigelli, Sonia A.; Hirrlinger, Amy M.; Lim, James; Warg, Kendall M.; Braithwaite, Victoria A.

2015-01-01

HIGHLIGHTS This study tested the effects of adolescent-stress on adult learning and memory.Adolescent-stressed rats had enhanced reversal learning compared to unstressed rats.Adolescent-stress exposure made working memory more vulnerable to disturbance.Adolescent-stress did not affect adult associative learning or reference memory. Exposure to acute stress can cause a myriad of cognitive impairments, but whether negative experiences continue to hinder individual as they age is not as well understood. We determined how chronic unpredictable stress during adolescence affects multiple learning and memory processes in adulthood. Using male Sprague Dawley rats, we measured learning (both associative and reversal) and memory (both reference and working) starting 110 days after completion of an adolescent-stress treatment. We found that adolescent-stress affected adult cognitive abilities in a context-dependent way. Compared to rats reared without stress, adolescent-stressed rats exhibited enhanced reversal learning, an indicator of behavioral flexibility, but showed no change in associative learning and reference memory abilities. Working memory, which in humans is thought to underpin reasoning, mathematical skills, and reading comprehension, may be enhanced by exposure to adolescent-stress. However, when adolescent-stressed animals were tested after a novel disturbance, they exhibited a 5-fold decrease in working memory performance while unstressed rats continued to exhibit a linear learning curve. These results emphasize the capacity for stress during adolescence to transform the cognitive abilities of adult animals, even after stress exposure has ceased and animals have resided in safe environments for the majority of their lifespans. PMID:26696849

English Listeners Use Suprasegmental Cues to Lexical Stress Early During Spoken-Word Recognition

PubMed Central

Poellmann, Katja; Kong, Ying-Yee

2017-01-01

Purpose We used an eye-tracking technique to investigate whether English listeners use suprasegmental information about lexical stress to speed up the recognition of spoken words in English. Method In a visual world paradigm, 24 young English listeners followed spoken instructions to choose 1 of 4 printed referents on a computer screen (e.g., “Click on the word admiral”). Displays contained a critical pair of words (e.g., ˈadmiral–ˌadmiˈration) that were segmentally identical for their first 2 syllables but differed suprasegmentally in their 1st syllable: One word began with primary lexical stress, and the other began with secondary lexical stress. All words had phrase-level prominence. Listeners' relative proportion of eye fixations on these words indicated their ability to differentiate them over time. Results Before critical word pairs became segmentally distinguishable in their 3rd syllables, participants fixated target words more than their stress competitors, but only if targets had initial primary lexical stress. The degree to which stress competitors were fixated was independent of their stress pattern. Conclusions Suprasegmental information about lexical stress modulates the time course of spoken-word recognition. Specifically, suprasegmental information on the primary-stressed syllable of words with phrase-level prominence helps in distinguishing the word from phonological competitors with secondary lexical stress. PMID:28056135

A minimum drives automatic target definition procedure for multi-axis random control testing

NASA Astrophysics Data System (ADS)

Musella, Umberto; D'Elia, Giacomo; Carrella, Alex; Peeters, Bart; Mucchi, Emiliano; Marulo, Francesco; Guillaume, Patrick

2018-07-01

Multiple-Input Multiple-Output (MIMO) vibration control tests are able to closely replicate, via shakers excitation, the vibration environment that a structure needs to withstand during its operational life. This feature is fundamental to accurately verify the experienced stress state, and ultimately the fatigue life, of the tested structure. In case of MIMO random tests, the control target is a full reference Spectral Density Matrix in the frequency band of interest. The diagonal terms are the Power Spectral Densities (PSDs), representative for the acceleration operational levels, and the off-diagonal terms are the Cross Spectral Densities (CSDs). The specifications of random vibration tests are however often given in terms of PSDs only, coming from a legacy of single axis testing. Information about the CSDs is often missing. An accurate definition of the CSD profiles can further enhance the MIMO random testing practice, as these terms influence both the responses and the shaker's voltages (the so-called drives). The challenges are linked to the algebraic constraint that the full reference matrix must be positive semi-definite in the entire bandwidth, with no flexibility in modifying the given PSDs. This paper proposes a newly developed method that automatically provides the full reference matrix without modifying the PSDs, considered as test specifications. The innovative feature is the capability of minimizing the drives required to match the reference PSDs and, at the same time, to directly guarantee that the obtained full matrix is positive semi-definite. The drives minimization aims on one hand to reach the fixed test specifications without stressing the delicate excitation system; on the other hand it potentially allows to further increase the test levels. The detailed analytic derivation and implementation steps of the proposed method are followed by real-life testing considering different scenarios.

Stress and your health

MedlinePlus

... uptight; Stress; Tension; Jitters; Apprehension Images Generalized anxiety disorder Stress and anxiety References Ahmed SM, Hershberger PJ, Lemkau ... on stress. www.nimh.nih.gov/health/publications/stress/index.shtml . Accessed ... aspects of cardiovascular disease. In: Mann DL, Zipes DP, Libby P, Bonow ...

The male to female ratio at birth in the Republic of Ireland and Northern Ireland: influence of societal stress

PubMed Central

2015-01-01

Introduction Male live births occur slightly in excess of female births. The ratio of male divided by total births is referred to as M/F. Many factors reduce M/F including toxins, stress, and privation, with excess male foetal loss. “The Troubles” (1969-1998) of Northern Ireland (NI) and the economic downturn of Republic of Ireland (ROI) from 2007 posed stresses with corresponding controls. This study analysed M/F in NI and ROI. Methods Annual male and female live births in NI and the ROI were compared using chi tests. Results M/F was significantly higher in NI than in ROI. M/F in NI dropped after 1974. M/F rose in ROI up to 1994, then fell. Discussion Violence-related stress may have been the cause for the M/F drop in NI. Economic improvement followed by recession may have caused parallel M/F changes in ROI. These findings agree with the stress hypothesis of M/F. PMID:26668416

Stress Literacy in Australian Adolescents

ERIC Educational Resources Information Center

Varlow, Megan; Wuthrich, Viviana; Murrihy, Rachael; Remond, Louise; Tuqiri, Rebekka; van Kessel, Jacobine; Wheatley, Anna; Dedousis-Wallace, Anna; Kidman, Antony

2009-01-01

Stress literacy is a term that refers to knowledge about stress and stress management techniques. Levels of stress literacy were examined in more than nine hundred Australian adolescents by providing a short stress-management education session and assessing stress literacy using a pre-post survey design. It was found that while adolescents had a…

Stress Crossover in Newlywed Marriage: A Longitudinal and Dyadic Perspective

ERIC Educational Resources Information Center

Neff, Lisa A.; Karney, Benjamin R.

2007-01-01

Studies of stress and marital quality often assess stress as an intrapersonal phenomenon, examining how spouses' stress may influence their own relationship well-being. Yet spouses' stress also may influence partners' relationship evaluations, a phenomenon referred to as stress crossover. This study examined stress crossover, and conditions that…

An artificial stress asperity for initialization of spontaneous rupture propagation - a parametric study of a dynamic model with linear slip-weakening friction

NASA Astrophysics Data System (ADS)

Galis, M.; Pelties, C.; Kristek, J.; Moczo, P.

2012-04-01

Artificial procedures are used to initiate spontaneous rupture on faults with the linear slip-weakening (LSW) friction law. Probably the most frequent technique is the stress asperity. It is important to minimize effects of the artificial initialization on the phase of the spontaneous rupture propagation. The effects may strongly depend on the geometry and size of the asperity, spatial distribution of the stress in and around the asperity, and a maximum stress-overshoot value. A square initialization zone with the stress discontinuously falling down at the asperity border to the level of the initial stress has been frequently applied (e.g., in the SCEC verification exercise). Galis et al. (2010) and Bizzarri (2010) independently introduced the elliptical asperity with a smooth spatial stress distribution in and around the asperity. In both papers the width of smoothing/tapering zone was only ad-hoc defined. Numerical simulations indicate that the ADER-DG method can account for a discontinuous-stress initialization more accurately than the FE method. Considering the ADER-DG solution a reference we performed numerical simulations in order to define the width of the smoothing/tapering zone to be used in the FE and FD-FE hybrid methods for spontaneous rupture propagation. We considered different sizes of initialization zone, different shapes of the initialization zone (square, circle, ellipse), different spatial distributions of stress (smooth, discontinuous), and different stress-overshoot values to investigate conditions of the spontaneous rupture propagation. We compare our numerical results with the 2D and 3D estimates by Andrews (1976a,b), Day (1982), Campillo & Ionescu (1997), Favreau at al. (1999) and Uenishi & Rice (2003, 2004). Results of our study may help modelers to better setup the initialization zone in order to avoid, e.g., a too large initialization zone and reduce numerical artifacts.

Validation of reference genes for normalization of qPCR mRNA expression levels in Staphylococcus aureus exposed to osmotic and lactic acid stress conditions encountered during food production and preservation.

PubMed

Sihto, Henna-Maria; Tasara, Taurai; Stephan, Roger; Johler, Sophia

2014-07-01

Staphylococcus aureus represents the most prevalent cause of food-borne intoxications worldwide. While being repressed by competing bacteria in most matrices, this pathogen exhibits crucial competitive advantages during growth at high salt concentrations or low pH, conditions frequently encountered in food production and preservation. We aimed to identify reference genes that could be used to normalize qPCR mRNA expression levels during growth of S. aureus in food-related osmotic (NaCl) and acidic (lactic acid) stress adaptation models. Expression stability of nine housekeeping genes was evaluated in full (LB) and nutrient-deficient (CYGP w/o glucose) medium under conditions of osmotic (4.5% NaCl) and acidic stress (lactic acid, pH 6.0) after 2-h exposure. Among the set of candidate reference genes investigated, rplD, rpoB,gyrB, and rho were most stably expressed in LB and thus represent the most suitable reference genes for normalization of qPCR data in osmotic or lactic acid stress models in a rich medium. Under nutrient-deficient conditions, expression of rho and rpoB was highly stable across all tested conditions. The presented comprehensive data on changes in expression of various S. aureus housekeeping genes under conditions of osmotic and lactic acid stress facilitate selection of reference genes for qPCR-based stress response models. © 2014 Federation of European Microbiological Societies. Published by John Wiley & Sons Ltd. All rights reserved.

Residual Stresses and Other Properties of Teardrops

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stroud, Mary Ann; Veirs, Douglas Kirk; Berg, John M.

The Department of Energy’s 3013 Standard for packaging plutonium-bearing materials for storage up to fifty years specifies a minimum of two individually welded, nested containers herein referred to as the 3013 outer and the 3013 inner.1 Stress corrosion cracking (SCC) is a potential failure mechanism for 3013 inner containers.2,3 The bagless transfer container (BTC), a 3013 inner container used by Hanford and Savanna River Site (SRS) made from 304L stainless steel (SS), poses the greatest concern for SCC.4,5 The Surveillance and Monitoring Program (SMP) use stressed metal samples known as teardrops as screening tools in SCC studies to evaluate factorsmore » that could result in cracks in the 3013 containers.6,7 This report provides background information on the teardrops used in the Los Alamos National Laboratory (LANL) SMP studies including method of construction, composition and variability. In addition, the report discusses measurements of residual stresses in teardrops and compares the results with residual stresses in BTCs reported previously.4 Factors affecting residual stresses, including teardrop dimensions and surface finish, are also discussed.« less

Family and Individual Factors Associated with Substance Involvement and PTS Symptoms among Adolescents in Greater New Orleans after Hurricane Katrina

ERIC Educational Resources Information Center

Rowe, Cynthia L.; La Greca, Annette M.; Alexandersson, Anders

2010-01-01

Objective: This study examined the influence of hurricane impact as well as family and individual risk factors on posttraumatic stress (PTS) symptoms and substance involvement among clinically referred adolescents affected by Hurricane Katrina. Method: A total of 80 adolescents (87% male; 13-17 years old; mean age = 15.6 years; 38% minorities) and…

Perceived Social Support and Markers of Heart Failure Severity

DTIC Science & Technology

2011-09-09

necessary for altering threat evaluation and enhancing self - esteem . Informational support, also referred to as appraisal support, describes the availability...1994). Social connections have been shown to enhance mood, reinforce self - esteem , and introduce adaptive coping resources for stress (Spiegel, Bloom...6MWT), self -reported symptoms as indicated by the Kansas City Cardiomyopathy Questionnaire (KCCQ), and levels of the biomarker BNP). Methods. Ninety

Stress Mapping in Glass-to-Metal Seals using Indentation Crack Lengths.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strong, Kevin; Buchheit, Thomas E.; Diebold, Thomas Wayne

Predicting the residual stress which develops during fabrication of a glass-to-metal compression seal requires material models that can accurately predict the effects of processing on the sealing glass. Validation of the predictions requires measurements on representative test geometries to accurately capture the interaction between the seal materials during a processing cycle required to form the seal, which consists of a temperature excursion through the glass transition temperature of the sealing glass. To this end, a concentric seal test geometry, referred to as a short cylinder seal, consisting of a stainless steel shell enveloping a commercial sealing glass disk has beenmore » designed, fabricated, and characterized as a model validation test geometry. To obtain data to test/validate finite element (FE) stress model predictions of this geometry, spatially-resolved residual stress was calculated from the measured lengths of the cracks emanating from radially positioned Vickers indents in the glass disk portion of the seal. The indentation crack length method is described, and the spatially-resolved residual stress determined experimentally are compared to FE stress predictions made using a nonlinear viscoelastic material model adapted to inorganic sealing glasses and an updated rate dependent material model for 304L stainless steel. The measurement method is a first to achieve a degree of success for measuring spatially resolved residual stress in a glass-bearing geometry and a favorable comparison between measurements and simulation was observed.« less

Stress Mapping in Glass-to-Metal Seals using Indentation Crack Lengths

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buchheit, Thomas E.; Strong, Kevin; Newton, Clay S.

Predicting the residual stress which develops during fabrication of a glass-to-metal compression seal requires material models that can accurately predict the effects of processing on the sealing glass. Validation of the predictions requires measurements on representative test geometries to accurately capture the interaction between the seal materials during a processing cycle required to form the seal, which consists of a temperature excursion through the glass transition temperature of the sealing glass. To this end, a concentric seal test geometry, referred to as a short cylinder seal, consisting of a stainless steel shell enveloping a commercial sealing glass disk has beenmore » designed, fabricated, and characterized as a model validation test geometry. To obtain data to test/validate finite element (FE) stress model predictions of this geometry, spatially-resolved residual stress was calculated from the measured lengths of the cracks emanating from radially positioned Vickers indents in the glass disk portion of the seal. The indentation crack length method is described, and the spatially-resolved residual stress determined experimentally are compared to FE stress predictions made using a nonlinear viscoelastic material model adapted to inorganic sealing glasses and an updated rate dependent material model for 304L stainless steel. The measurement method is a first to achieve a degree of success for measuring spatially resolved residual stress in a glass-bearing geometry and a favorable comparison between measurements and simulation was observed.« less

Sexual Self-concept and Its Relationship to Depression, Stress and Anxiety in Postmenopausal Women

PubMed Central

Heidari, Mohammad; Rafiei, Hossein

2017-01-01

Objectives Women in menopause have the more mood swings than before menopause. At the same time seem to sexual self-concept and sexual aspects of self-knowledge has a great impact on their mental health. This study aimed to investigate the sexual self-concept and its relationship to depression, stress and anxiety in postmenopausal women's. Methods In this descriptive correlation research, 300 of postmenopausal women referred to healthcare and medical treatment centers in Abadeh city were selected by convenience sampling method. The information in this study was collected by using questionnaires of multidimensional sexual self-concept and depression anxiety stress scale 21 (DASS-21). For data analysis, SPSS/17 software was used. Results The results showed the mean score positive sexual self-concept was 41.03 ± 8.66 and the average score of negative sexual self in women's was 110.32 ± 43.05. As well as scores of depression, stress, and anxiety, 35.67%, 32.33% and 37.67% respectively were in severe level. Positive and negative sexual self-concept scores with scores of stress, anxiety, and depression, of post-menopausal women in the confidence of 0.01, is significantly correlated (P < 0.05). Conclusions Being stress, anxiety, and depression in severe level and also a significant correlation between increased stress, anxiety and depression with negative and weak self-concept of women's, it is necessary to devote more careful attention to mental health issues of women's and have appropriate interventions. PMID:28523258

Mitigating cutting-induced plasticity in the contour method, Part 2: Numerical analysis

DOE PAGES

Muránsky, O.; Hamelin, C. J.; Hosseinzadeh, F.; ...

2016-02-10

Cutting-induced plasticity can have a significant effect on the measurement accuracy of the contour method. The present study examines the benefit of a double-embedded cutting configuration that relies on self-restraint of the specimen, relative to conventional edge-crack cutting configurations. A series of finite element analyses are used to simulate the planar sectioning performed during double-embedded and conventional edge-crack contour cutting configurations. The results of numerical analyses are first compared to measured results to validate the cutting simulations. The simulations are then used to compare the efficacy of different cutting configurations by predicting the deviation of the residual stress profile frommore » an original (pre-cutting) reference stress field, and the extent of cutting-induced plasticity. Comparisons reveal that while the double-embedded cutting configuration produces the most accurate residual stress measurements, the highest levels of plastic flow are generated in this process. As a result, this cutting-induced plastic deformation is, however, largely confined to small ligaments formed as a consequence of the sample sectioning process, and as such it does not significantly affect the back-calculated residual stress field.« less

Mitigating cutting-induced plasticity in the contour method, Part 2: Numerical analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muránsky, O.; Hamelin, C. J.; Hosseinzadeh, F.

Cutting-induced plasticity can have a significant effect on the measurement accuracy of the contour method. The present study examines the benefit of a double-embedded cutting configuration that relies on self-restraint of the specimen, relative to conventional edge-crack cutting configurations. A series of finite element analyses are used to simulate the planar sectioning performed during double-embedded and conventional edge-crack contour cutting configurations. The results of numerical analyses are first compared to measured results to validate the cutting simulations. The simulations are then used to compare the efficacy of different cutting configurations by predicting the deviation of the residual stress profile frommore » an original (pre-cutting) reference stress field, and the extent of cutting-induced plasticity. Comparisons reveal that while the double-embedded cutting configuration produces the most accurate residual stress measurements, the highest levels of plastic flow are generated in this process. As a result, this cutting-induced plastic deformation is, however, largely confined to small ligaments formed as a consequence of the sample sectioning process, and as such it does not significantly affect the back-calculated residual stress field.« less

A Novel Double Subculture Method and Its Theory for the Enumeration of Injured Cells in Stressed Microbial Population.

PubMed

Tsuchido, Tetsuaki

2017-01-01

　A novel double subculture method, termed DiVSaL (Differential Viabilities between Solid and Liquid media) method, for the enumeration of injured cell population of a microorganism, which occurs after some sublethal to lethal treatment, was proposed. In this method injured cells were enumerated as the differential value between viabilities determined with two different techniques, the conventional plate counting using a solid agar medium and the growth delay analysis using a liquid medium. In the former technique, the viable cell number is obtained as colony forming unit (CFU) formed on an agar medium where sublethally injured cells are as much rescued as possible. In the latter technique, on the other hand," the integrated viability" defined by Takano and Tsuchido (1982) is introduced and is calculated from the growth delay of a stressed population, referred to unstressed one. For the growth delay analysis, in this paper, not only the original theoretical model, where the specific growth rate (and therefore the defined G 10 value) does not change after the exposure to a stress treatment, but also a novel modified theory, where the parameter changes, is proposed. On the theoretical background, this DiVSaL method as a double subculture method can be used to enumerate the injured cells without selection by addition of some inhibitor or by nutritional shortage.

Heterogeneous growth-induced prestrain in the heart

PubMed Central

Genet, M.; Rausch, M.; Lee, L.C.; Choy, S.; Zhao, X.; Kassab, G.S.; Kozerke, S.; Guccione, J.M.; Kuhl, E.

2015-01-01

Even when entirely unloaded, biological structures are not stress-free, as shown by Y.C. Fung’s seminal opening angle experiment on arteries and the left ventricle. As a result of this prestrain, subject-specific geometries extracted from medical imaging do not represent an unloaded reference configuration necessary for mechanical analysis, even if the structure is externally unloaded. Here we propose a new computational method to create physiological residual stress fields in subject-specific left ventricular geometries using the continuum theory of fictitious configurations combined with a fixed-point iteration. We also reproduced the opening angle experiment on four swine models, to characterize the range of normal opening angle values. The proposed method generates residual stress fields which can reliably reproduce the range of opening angles between 8.7±1.8 and 16.6 ± 13.7 as measured experimentally. We demonstrate that including the effects of prestrain reduces the left ventricular stiffness by up to 40%, thus facilitating the ventricular filling, which has a significant impact on cardiac function. This method can improve the fidelity of subject-specific models to improve our understanding of cardiac diseases and to optimize treatment options. PMID:25913241

Transcriptome-wide identification of reference genes for expression analysis of soybean responses to drought stress along the day

USDA-ARS?s Scientific Manuscript database

The soybean transcriptome displays strong variation along the day in optimal growth conditions and also in response to adverse circumstances, like drought stress. However, no study conducted to date has presented suitable reference genes, with stable expression along the day, for relative gene expre...

A global deltas typology of environmental stress and its relation to terrestrial hydrology

NASA Astrophysics Data System (ADS)

Tessler, Z. D.; Vorosmarty, C. J.; McDonald, K. C.; Schroeder, R.; Grossberg, M.; Gladkova, I.; Aizenman, H.

2013-12-01

River delta systems around the world are under varying degrees of environmental stress stemming from a variety of human impacts, both from upstream basin based activities and local impacts on the deltas themselves, as well as sea level rise. These stresses are known to affect rates of relative sea level rise by disrupting the delivery or deposition of sediment on the delta. We present a global database of several of these stresses, and investigate patterns of stress across delta systems. Several methods of aggregating the environmental stressors into an index score are also investigated. A statistical clustering analysis, which we refer to as a "global delta fingerprinting system", across the environmental stresses identifies systems under similar states of threat. Several deltas, including the Nile, are in unique clusters, while regional patterns are evident among deltas in Southeast Asia. These patterns are compared with observed surface inundation derived from SAR, NDVI from MODIS, river discharge estimates from the WBMplus numerical model, and ocean wave activity from WAVEWATCH III. Delta inundation sensitivity to river and coastal forcings are observed to vary with environmental stress and social indicators including population density and GDP.

46 CFR Appendix B to Part 154 - Stress Analyses Definitions

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Stress Analyses Definitions B Appendix B to Part 154...—Stress Analyses Definitions The following are the standard definitions of stresses for the analysis of an independent tank type B: Normal stress means the component of stress normal to the plane of reference...

46 CFR Appendix B to Part 154 - Stress Analyses Definitions

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Stress Analyses Definitions B Appendix B to Part 154...—Stress Analyses Definitions The following are the standard definitions of stresses for the analysis of an independent tank type B: Normal stress means the component of stress normal to the plane of reference...

46 CFR Appendix B to Part 154 - Stress Analyses Definitions

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Stress Analyses Definitions B Appendix B to Part 154...—Stress Analyses Definitions The following are the standard definitions of stresses for the analysis of an independent tank type B: Normal stress means the component of stress normal to the plane of reference...

46 CFR Appendix B to Part 154 - Stress Analyses Definitions

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Stress Analyses Definitions B Appendix B to Part 154...—Stress Analyses Definitions The following are the standard definitions of stresses for the analysis of an independent tank type B: Normal stress means the component of stress normal to the plane of reference...

46 CFR Appendix B to Part 154 - Stress Analyses Definitions

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Stress Analyses Definitions B Appendix B to Part 154...—Stress Analyses Definitions The following are the standard definitions of stresses for the analysis of an independent tank type B: Normal stress means the component of stress normal to the plane of reference...

Selection and Validation of Reference Genes for Accurate RT-qPCR Data Normalization in Coffea spp. under a Climate Changes Context of Interacting Elevated [CO2] and Temperature

PubMed Central

Martins, Madlles Q.; Fortunato, Ana S.; Rodrigues, Weverton P.; Partelli, Fábio L.; Campostrini, Eliemar; Lidon, Fernando C.; DaMatta, Fábio M.; Ramalho, José C.; Ribeiro-Barros, Ana I.

2017-01-01

World coffee production has faced increasing challenges associated with ongoing climatic changes. Several studies, which have been almost exclusively based on temperature increase, have predicted extensive reductions (higher than half by 2,050) of actual coffee cropped areas. However, recent studies showed that elevated [CO2] can strongly mitigate the negative impacts of heat stress at the physiological and biochemical levels in coffee leaves. In addition, it has also been shown that coffee genotypes can successfully cope with temperatures above what has been traditionally accepted. Altogether, this information suggests that the real impact of climate changes on coffee growth and production could be significantly lower than previously estimated. Gene expression studies are an important tool to unravel crop acclimation ability, demanding the use of adequate reference genes. We have examined the transcript stability of 10 candidate reference genes to normalize RT-qPCR expression studies using a set of 24 cDNAs from leaves of three coffee genotypes (CL153, Icatu, and IPR108), grown under 380 or 700 μL CO2 L−1, and submitted to increasing temperatures from 25/20°C (day/night) to 42/34°C. Samples were analyzed according to genotype, [CO2], temperature, multiple stress interaction ([CO2], temperature) and total stress interaction (genotype, [CO2], and temperature). The transcript stability of each gene was assessed through a multiple analytical approach combining the Coeficient of Variation method and three algorithms (geNorm, BestKeeper, NormFinder). The transcript stability varied according to the type of stress for most genes, but the consensus ranking obtained with RefFinder, classified MDH as the gene with the highest mRNA stability to a global use, followed by ACT and S15, whereas α-TUB and CYCL showed the least stable mRNA contents. Using the coffee expression profiles of the gene encoding the large-subunit of ribulose-1,5-bisphosphate carboxylase/oxygenase (RLS), results from the in silico aggregation and experimental validation of the best number of reference genes showed that two reference genes are adequate to normalize RT-qPCR data. Altogether, this work highlights the importance of an adequate selection of reference genes for each single or combined experimental condition and constitutes the basis to accurately study molecular responses of Coffea spp. in a context of climate changes and global warming. PMID:28326094

Selection and Validation of Reference Genes for Accurate RT-qPCR Data Normalization in Coffea spp. under a Climate Changes Context of Interacting Elevated [CO2] and Temperature.

PubMed

Martins, Madlles Q; Fortunato, Ana S; Rodrigues, Weverton P; Partelli, Fábio L; Campostrini, Eliemar; Lidon, Fernando C; DaMatta, Fábio M; Ramalho, José C; Ribeiro-Barros, Ana I

2017-01-01

World coffee production has faced increasing challenges associated with ongoing climatic changes. Several studies, which have been almost exclusively based on temperature increase, have predicted extensive reductions (higher than half by 2,050) of actual coffee cropped areas. However, recent studies showed that elevated [CO 2 ] can strongly mitigate the negative impacts of heat stress at the physiological and biochemical levels in coffee leaves. In addition, it has also been shown that coffee genotypes can successfully cope with temperatures above what has been traditionally accepted. Altogether, this information suggests that the real impact of climate changes on coffee growth and production could be significantly lower than previously estimated. Gene expression studies are an important tool to unravel crop acclimation ability, demanding the use of adequate reference genes. We have examined the transcript stability of 10 candidate reference genes to normalize RT-qPCR expression studies using a set of 24 cDNAs from leaves of three coffee genotypes (CL153, Icatu, and IPR108), grown under 380 or 700 μL CO 2 L -1 , and submitted to increasing temperatures from 25/20°C (day/night) to 42/34°C. Samples were analyzed according to genotype, [CO 2 ], temperature, multiple stress interaction ([CO 2 ], temperature) and total stress interaction (genotype, [CO 2 ], and temperature). The transcript stability of each gene was assessed through a multiple analytical approach combining the Coeficient of Variation method and three algorithms (geNorm, BestKeeper, NormFinder). The transcript stability varied according to the type of stress for most genes, but the consensus ranking obtained with RefFinder, classified MDH as the gene with the highest mRNA stability to a global use, followed by ACT and S15 , whereas α -TUB and CYCL showed the least stable mRNA contents. Using the coffee expression profiles of the gene encoding the large-subunit of ribulose-1,5-bisphosphate carboxylase/oxygenase ( RLS ), results from the in silico aggregation and experimental validation of the best number of reference genes showed that two reference genes are adequate to normalize RT-qPCR data. Altogether, this work highlights the importance of an adequate selection of reference genes for each single or combined experimental condition and constitutes the basis to accurately study molecular responses of Coffea spp. in a context of climate changes and global warming.

Assessment of salivary amylase as a stress biomarker in pregnant patients.

PubMed

Guglielminotti, J; Dehoux, M; Mentré, F; Bedairia, E; Montravers, P; Desmonts, J-M; Longrois, D

2012-01-01

Chronic stress during pregnancy has been associated with worsened maternal and fetal outcomes. Acute stress immediately before spinal anaesthesia for caesarean section may contribute to hypotension. Therefore objective measures of acute stress may help identify women at risk of adverse outcomes. Salivary alpha-amylase is a stress biomarker that has so far been poorly investigated during pregnancy. The reference change value is the difference between two sequential results that must be exceeded for a change to be considered clinically relevant. Our first aim was to determine if salivary alpha-amylase increased in pregnant patients when subjected to the stress of transfer to the operating room. Our second aim was to determine if changes in salivary alpha-amylase were likely to be clinically significant by measuring reference change value in healthy volunteers. In 15 pregnant patients undergoing planned caesarean section under spinal anaesthesia, salivary alpha-amylase, systolic blood pressure, heart rate, and immediate anxiety were measured on the morning of surgery on the ward and again in the operating room. The reference change value was calculated from 18 healthy volunteers. A median 220% increase in salivary alpha-amylase activity (P=0.0015) and a 17% increase in systolic blood pressure (P=0.0006) were observed between the ward and operating room. No changes of immediate anxiety or heart rate were observed. Reference change value was ±76% in volunteers and 13 of the 15 pregnant patients had a salivary alpha-amylase increase greater than the reference change value. When pregnant women are taken to the operating room, a clinically and statistically significant increase in salivary alpha-amylase was observed. Further studies are required to define its clinical usefulness. Copyright © 2011 Elsevier Ltd. All rights reserved.

Assessment of oxidative stress markers and concentrations of selected elements in the leaves of Cassia occidentalis growing wild on a coal fly ash basin.

PubMed

Love, Amit; Banerjee, B D; Babu, C R

2013-08-01

Assessment of oxidative stress levels and tissue concentrations of elements in plants growing wild on fly ash basins is critical for realistic hazard identification of fly ash disposal areas. Hitherto, levels of oxidative stress markers in plants growing wild on fly ash basins have not been adequately investigated. We report here concentrations of selected metal and metalloid elements and levels of oxidative stress markers in leaves of Cassia occidentalis growing wild on a fly ash basin (Badarpur Thermal Power Station site) and a reference site (Garhi Mandu Van site). Plants growing on the fly ash basin had significantly high foliar concentration of As, Ni, Pb and Se and low foliar concentration of Mn and Fe compared to the plants growing on the reference site. The plants inhabiting the fly ash basin showed signs of oxidative stress and had elevated levels of lipid peroxidation, electrolyte leakage from cells and low levels of chlorophyll a and total carotenoids compared to plants growing at the reference site. The levels of both protein thiols and nonprotein thiols were elevated in plants growing on the fly ash basin compared to plants growing on the reference site. However, no differences were observed in the levels of cysteine, reduced glutathione and oxidized glutathione in plants growing at both the sites. Our study suggests that: (1) fly ash triggers oxidative stress responses in plants growing wild on fly ash basin, and (2) elevated levels of protein thiols and nonprotein thiols may have a role in protecting the plants from environmental stress.

[Studies on occupational stress intervention in workplaces abroad: a systematic review].

PubMed

Hua, Yujie; Dai, Junming

2015-10-01

To evaluate the effects of occupational stress intervention in the workplaces abroad by systematic review and to provide a reference for domestic research. The Medline database was searched to collect the literature on occupational stress intervention published from January 1 in 2000 to September 4 in 2014, Using standardized forms, the methods, contents, subjects, study design, result indicator, effectiveness and evidence of the intervention were extracted and analyzed. Thirty studies met the inclusion criteria, with a total sample size of 5699 participants, including 20 randomized trials and 10 non-randomized or self-controlled studies from 12 countries, such as Germany, Japan, and Britain. The course of intervention ranged from 4 to 16 weeks. Six types of intervention were identified, i.e., cognitive-behavioral treatment (CBT), relaxation technique, physical activity, organization-focused intervention, combined intervention, and multilevel intervention, among which CBT was used most frequently. The outcome variables mainly included social psychological variable and work-related variable. Occupational stress intervention could significantly improve the occupational stress and depressive symptoms, and also had some effects on the work-related outcomes. The effectiveness of the intervention might vary between the subjects with different occupational stress levels before intervention. The effectiveness of the intervention was better at an organizational level than at an individual level, but the effectiveness at a multiple level was not necessarily better than that at a single level. Occupational stress intervention is an effective method to improve the occupational stress at workplace. However, the occupational stress level before intervention, the duration and frequency of intervention, measures and level of intervention, and follow-up period have certain influence on the effectiveness of intervention. Future research should pay attention to methodology, focus on organizational level and network-based intervention, and increase the cost-benefit analysis.

The Application of Ultra-High-Performance Liquid Chromatography Coupled with a LTQ-Orbitrap Mass Technique to Reveal the Dynamic Accumulation of Secondary Metabolites in Licorice under ABA Stress.

PubMed

Li, Da; Xu, Guojie; Ren, Guangxi; Sun, Yufeng; Huang, Ying; Liu, Chunsheng

2017-10-20

The traditional medicine licorice is the most widely consumed herbal product in the world. Although much research work on studying the changes in the active compounds of licorice has been reported, there are still many areas, such as the dynamic accumulation of secondary metabolites in licorice, that need to be further studied. In this study, the secondary metabolites from licorice under two different methods of stress were investigated by ultra-high-performance liquid chromatography coupled with hybrid linear ion trap-Orbitrap mass spectrometry (UHPLC-LTQ-Orbitrap-MS). A complex continuous coordination of flavonoids and triterpenoids in a network was modulated by different methods of stress during growth. The results showed that a total of 51 secondary metabolites were identified in licorice under ABA stress. The partial least squares-discriminate analysis (PLS-DA) revealed the distinction of obvious compounds among stress-specific districts relative to ABA stress. The targeted results showed that there were significant differences in the accumulation patterns of the deeply targeted 41 flavonoids and 10 triterpenoids compounds by PCA and PLS-DA analyses. To survey the effects of flavonoid and triterpenoid metabolism under ABA stress, we inspected the stress-specific metabolic changes. Our study testified that the majority of flavonoids and triterpenoids were elevated in licorice under ABA stress, while the signature metabolite affecting the dynamic accumulation of secondary metabolites was detected. Taken together, our results suggest that ABA-specific metabolite profiling dynamically changed in terms of the biosynthesis of flavonoids and triterpenoids, which may offer new trains of thought on the regular pattern of dynamic accumulation of secondary metabolites in licorice at the metabolite level. Our results also provide a reference for clinical applications and directional planting and licorice breeding.

The Principal: An Agent for Reducing Teacher Stress.

ERIC Educational Resources Information Center

Calabrese, Raymond L.

1987-01-01

Teachers often cite stress as a reason for leaving the teaching profession. Stress does not have to be a negative factor. Discusses ways that principals can use their leadership skills to make stress a positive force. Includes five references. (Author/MD)

Effects of complete water fasting and regeneration diet on kidney function, oxidative stress and antioxidants.

PubMed

Mojto, V; Gvozdjakova, A; Kucharska, J; Rausova, Z; Vancova, O; Valuch, J

2018-01-01

The aim of the study was to observe the influence of 11-days complete water fasting (WF) and regeneration diet (RD) on renal function, body weight, blood pressure and oxidative stress. Therapeutic WF is considered a healing method. Ten volunteers drank only water for 11 days, followed by RD for the next 11 days. Data on body weight, blood pressure, kidney functions, antioxidants, lipid peroxidation, cholesterols, triacylglycerols and selected biochemical parameters were obtained. WF increased uric acid and creatinine and decreased glomerular filtration rate. After RD, the parameters were comparable to baseline values. Urea was not affected. Lipid peroxidation (TBARS) decreased and maintained stable after RD. Fasting decreased α-tocopherol and increased γ-tocopherol, no significant changes were found after RD. Coenzyme Q10 decreased after RD. HDL-cholesterol decreased in WF. Total- and LDL-cholesterol decreased after RD. Other biochemical parameters were within the range of reference values. The effect of the complete fasting on kidney function was manifested by hyperuricemia. Renal function was slightly decreased, however maintained within the reference values. After RD, it returned to baseline values. The positive effect of the complete water fasting was in the reduction of oxidative stress, body weight and blood pressure (Tab. 3, Ref. 25).

Evaluation of reference genes for quantitative RT-PCR in Lolium temulentum under abiotic stress

USDA-ARS?s Scientific Manuscript database

Lolium temulentum is a valuable model grass species for the study of stress in forage and turf grasses. Gene expression analysis by quantitative real time RT-PCR relies on the use of proper internal standards. The aim of this study was to identify and evaluate reference genes for use in real-time q...

Learning, Adjustment and Stress Disorders: With Special Reference to Tsunami Affected Regions. Beitrage zur Padagogischen und Rehabilitationspsychologie. Volume 1

ERIC Educational Resources Information Center

Witruk, Evelin, Ed.; Riha, David, Ed.; Teichert, Alexandra, Ed.; Haase, Norman, Ed.; Stueck, Marcus, Ed.

2010-01-01

This book contains selected contributions from the international workshop Learning, "Adjustment and Stress Disorders--with special reference to Tsunami affected Regions" organised by Evelin Witruk and the team of Educational and Rehabilitative Psychology at the University of Leipzig in January 2006. The book contains new results and the…

Assessing Posttraumatic Stress Disorder with or without Reference to a Single, Worst Traumatic Event: Examining Differences in Factor Structure

ERIC Educational Resources Information Center

Elhai, Jon D.; Engdahl, Ryan M.; Palmieri, Patrick A.; Naifeh, James A.; Schweinle, Amy; Jacobs, Gerard A.

2009-01-01

The authors examined the effects of a methodological manipulation on the Posttraumatic Stress Disorder (PTSD) Checklist's factor structure: specifically, whether respondents were instructed to reference a single worst traumatic event when rating PTSD symptoms. Nonclinical, trauma-exposed participants were randomly assigned to 1 of 2 PTSD…

Bibliography of Selected Literature in the 1970s Related to Crises, Family Stress, Coping and Adaptation.

ERIC Educational Resources Information Center

Chesser, Barbara

This bibliography of literature from the 1970s related to crises, family stress, coping, and adaptation contains references of particular interest to professionals in the areas of counseling, education, and family social, psychological and health services. The bibliography is divided into 26 categories; references are classified according to major…

Critical Void Volume Fraction fc at Void Coalescence for S235JR Steel at Low Initial Stress Triaxiality

NASA Astrophysics Data System (ADS)

Grzegorz Kossakowski, Paweł; Wciślik, Wiktor

2017-10-01

The paper is concerned with the nucleation, growth and coalescence of microdefects in the form of voids in S235JR steel. The material is known to be one of the basic steel grades commonly used in the construction industry. The theory and methods of damage mechanics were applied to determine and describe the failure mechanisms that occur when the material undergoes deformation. Until now, engineers have generally employed the Gurson-Tvergaard- Needleman model. This material model based on damage mechanics is well suited to define and analyze failure processes taking place in the microstructure of S235JR steel. It is particularly important to determine the critical void volume fraction fc , which is one of the basic parameters of the Gurson-Tvergaard-Needleman material model. As the critical void volume fraction fc refers to the failure stage, it is determined from the data collected for the void coalescence phase. A case of multi-axial stresses is considered taking into account the effects of spatial stress state. In this study, the parameter of stress triaxiality η was used to describe the failure phenomena. Cylindrical tensile specimens with a circumferential notch were analysed to obtain low values of initial stress triaxiality (η = 0.556 of the range) in order to determine the critical void volume fraction fc . It is essential to emphasize how unique the method applied is and how different it is from the other more common methods involving parameter calibration, i.e. curve-fitting methods. The critical void volume fraction fc at void coalescence was established through digital image analysis of surfaces of S235JR steel, which involved studying real, physical results obtained directly from the material tested.

Smartphone-Based Self-Assessment of Stress in Healthy Adult Individuals: A Systematic Review

PubMed Central

Þórarinsdóttir, Helga; Kessing, Lars Vedel

2017-01-01

Background Stress is a common experience in today’s society. Smartphone ownership is widespread, and smartphones can be used to monitor health and well-being. Smartphone-based self-assessment of stress can be done in naturalistic settings and may potentially reflect real-time stress level. Objective The objectives of this systematic review were to evaluate (1) the use of smartphones to measure self-assessed stress in healthy adult individuals, (2) the validity of smartphone-based self-assessed stress compared with validated stress scales, and (3) the association between smartphone-based self-assessed stress and smartphone generated objective data. Methods A systematic review of the scientific literature was reported and conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) statement. The scientific databases PubMed, PsycINFO, Embase, IEEE, and ACM were searched and supplemented by a hand search of reference lists. The databases were searched for original studies involving healthy individuals older than 18 years, measuring self-assessed stress using smartphones. Results A total of 35 published articles comprising 1464 individuals were included for review. According to the objectives, (1) study designs were heterogeneous, and smartphone-based self-assessed stress was measured using various methods (e.g., dichotomized questions on stress, yes or no; Likert scales on stress; and questionnaires); (2) the validity of smartphone-based self-assessed stress compared with validated stress scales was investigated in 3 studies, and of these, only 1 study found a moderate statistically significant positive correlation (r=.4; P<.05); and (3) in exploratory analyses, smartphone-based self-assessed stress was found to correlate with some of the reported smartphone generated objective data, including voice features and data on activity and phone usage. Conclusions Smartphones are being used to measure self-assessed stress in different contexts. The evidence of the validity of smartphone-based self-assessed stress is limited and should be investigated further. Smartphone generated objective data can potentially be used to monitor, predict, and reduce stress levels. PMID:28193600

Does acute maternal stress in pregnancy affect infant health outcomes? Examination of a large cohort of infants born after the terrorist attacks of September 11, 2001

PubMed Central

Endara, Skye M; Ryan, Margaret AK; Sevick, Carter J; Conlin, Ava Marie S; Macera, Caroline A; Smith, Tyler C

2009-01-01

Background Infants in utero during the terrorist attacks of September 11, 2001 may have been negatively affected by maternal stress. Studies to date have produced contradictory results. Methods Data for this retrospective cohort study were obtained from the Department of Defense Birth and Infant Health Registry and included up to 164,743 infants born to active-duty military families. Infants were considered exposed if they were in utero on September 11, 2001, while the referent group included infants gestating in the same period in the preceding and following year (2000 and 2002). We investigated the association of this acute stress during pregnancy with the infant health outcomes of male:female sex ratio, birth defects, preterm birth, and growth deficiencies in utero and in infancy. Results No difference in sex ratio was observed between infants in utero in the first trimester of pregnancy on September 11, 2001 and infants in the referent population. Examination of the relationship between first-trimester exposure and birth defects also revealed no significant associations. In adjusted multivariable models, neither preterm birth nor growth deficiencies were significantly associated with the maternal exposure to the stress of September 11 during pregnancy. Conclusion The findings from this large population-based study suggest that women who were pregnant during the terrorist attacks of September 11, 2001 had no increased risk of adverse infant health outcomes. PMID:19619310

Assessment of crack opening area for leak rates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharples, J.K.; Bouchard, P.J.

1997-04-01

This paper outlines the background to recommended crack opening area solutions given in a proposed revision to leak before break guidance for the R6 procedure. Comparisons with experimental and analytical results are given for some selected cases of circumferential cracks in cylinders. It is shown that elastic models can provide satisfactory estimations of crack opening displacement (and area) but they become increasingly conservative for values of L{sub r} greater than approximately 0.4. The Dugdale small scale yielding model gives conservative estimates of crack opening displacement with increasing enhancement for L{sub r} values greater than 0.4. Further validation of the elastic-plasticmore » reference stress method for up to L{sub r} values of about 1.0 is presented by experimental and analytical comparisons. Although a more detailed method, its application gives a best estimate of crack opening displacement which may be substantially greater than small scale plasticity models. It is also shown that the local boundary conditions in pipework need to be carefully considered when evaluating crack opening area for through-wall bending stresses resulting from welding residual stresses or geometry discontinuities.« less

Occupational stress and hypertension.

PubMed

Ferguson, D A; Edye, B V; Long, A A; Ng, T K

1982-01-01

The Department of Occupational and Environmental Health in the Commonwealth Institute of Health and the University of Sydney has since 1977 been conducting a study of possible occupational factors in hypertension and in other precursors of coronary heart disease. The study arose out of claims by public service employees that the stress of their work was inducing these diseases. The study has two additional aims: prospective observation of progression of hypertension and associated cardiovascular risk variables in relation to evolving occupational conditions; and a trial of non-pharmacological modification of mild hypertension and associated variables through intervention by occupational nurses. A total of 4607 subject drawn from telecommunications and taxation offices in Sydney underwent medical screening before allocation, according to risk, into intervention and reference groups. Data acquisition included self-administration of two questionnaires, on personal, social, occupational and medical history, and on reaction to potential work stresses and to recent life events. Response to questions related to the coronary prone behaviour pattern was tested in a sub-set of the population against rating of the pattern by Rosenman and Friedman's interview method. The paper reports on method and preliminary description of the population.

New concept for treating female stress urinary incontinence with radiofrequency

PubMed Central

Lordelo, Patrícia; Boas, Andrea Vilas; Sodré, Danielle; Lemos, Amanda; Tozetto, Sibele; Brasil, Cristina

2017-01-01

ABSTRACT Purpose: To evaluate the clinical response and adverse effects of radiofrequency on the urethral meatus in the treatment of stress urinary incontinence in women. Materials and Methods: This phase one study included ten women with Stress Urinary Incontinence (SUI). The evaluation consisted of 1 hour Pad tests to quantify urine loss and to assess the degree of procedure satisfaction by using the Likert scale. To evaluate safety, we observed the number of referred side effects. Results: Average age was 53.10 years±7.08 years. In assessing the final Pad Test, 70% showed a reduction and 30% a worsening of urinary loss. Using the Pad Test one month later, there was a reduction in all patients (p=0.028). The degree of satisfaction was 90% and no side effects have been observed. One patient reported burning sensation. Conclusion: The treatment of SUI with radiofrequency on the urethral meatus has no adverse effects, being a low risk method that reduces urinary loss in women. However, to increase the validity of the study, larger clinical trials are warranted. PMID:28727373

An Experimental Evaluation of Adaptogenic Potential of Standardized Epipremnum Aureum Leaf Extract.

PubMed

Das, Sreemoy Kanti; Sengupta, Pinaki; Mustapha, Mohd Shahimi; Sarker, Md Moklesur Rahman

2017-01-01

Stress is a normal part of everyday life but chronic stress can lead to a variety of stress-related illnesses including hypertension, anxiety, and depression. In the present investigation, standardized leaf extract of Epipremnumaureum was evaluated for its anti-stress potential. For the evaluation of anti-stress activity, groups of mice ( n = 6) were subjected to forced swim stress and anoxic stress tolerance test in mice 1h after daily treatment of E.aureumextract . Diazepam (5 mg/kg) was taken as a reference standard. Urinary vanillylmandelic acid (VMA) and ascorbic acid were selected as noninvasive biomarkers to assess the anti-stress activity and plasma cortisol, blood ascorbic acid, and weight of adrenal were measured. The 24 h urinary excretion of VMA and ascorbic acid were determined by spectrophotometric methods in all groups under normal and stressed conditions. The hematological parameters (neutrophils, lymphocytes, and eosinophils) were also determined. Administration of E.aureumat doses of 400 and 600 mg/kg wasfound to be effective in inhibiting the stress induced urinary biochemical changes in a dose-dependent manner. Treatment with E. aureum extract prevents the rise in blood ascorbic acid and plasma cortisol. Moreover, the extract prevented the increase in weight of adrenal gland also significantly increased the anoxia stress tolerance time. Dose-dependent significant reduction in white blood cell count was observed in anoxic stress tolerance test as compared to stressed group. Hence, the present study provides scientific support for the positiveadaptogenic effect of E. aureum extract.

Selection of reference genes for microRNA analysis associated to early stress response to handling and confinement in Salmo salar.

PubMed

Zavala, Eduardo; Reyes, Daniela; Deerenberg, Robert; Vidal, Rodrigo

2017-05-11

MicroRNAs are key non-coding RNA molecules that play a relevant role in the regulation of gene expression through translational repression and/or transcript cleavage during normal development and physiological adaptation processes like stress. Quantitative reverse transcription polymerase chain reaction (RT-qPCR) has become the approach normally used to determine the levels of microRNAs. However, this approach needs the use of endogenous reference. An improper selection of endogenous references can result in confusing interpretation of data. The aim of this study was to identify and validate appropriate endogenous reference miRNA genes for normalizing RT-qPCR survey of miRNAs expression in four different tissues of Atlantic salmon, under handling and confinement stress conditions associated to early or primary stress response. Nine candidate reference normalizers, including microRNAs and nuclear genes, normally used in vertebrate microRNA expression studies were selected from literature, validated by RT-qPCR and analyzed by the algorithms geNorm and NormFinder. The results revealed that the ssa-miR-99-5p gene was the most stable overall and that ssa-miR-99-5p and ssa-miR-23a-5p genes were the best combination. Moreover, the suitability of ssa-miR-99-5p and ssa-miR-23a-5p as endogeneuos reference genes was demostrated by the expression analysis of ssa-miR-193-5p gene.

Psychosocial burden among offshore drilling platform employees.

PubMed

Leszczyńska, Irena; Jeżewska, Maria

2010-01-01

Conditions of work on offshore drilling platforms are particularly hard due to extreme environmental situations created both by nature and technological processes. Oil drilling workers employed on the open sea are potentially exposed to permanently high stress. Apart from the obvious objective factors affecting drilling platform employees, a great role in the general work-related stress level is played by the working conditions and work-related psychosocial factors, defined according to Karask's concept as demands, control, and social support. A total of 184 drill platform workers were examined using objective and subjective research methods. The level of subjective stress among drilling platform workers is lower than the level of objective stress and the stress resulting from prognoses related with specificity of work in extremely hard conditions (audit). The examinations of drilling platform workers reveal a positive role of stress in psychological adaptation, being a special case of the "work ethos" and attachment to the firm. In such investigations of work-related stress on drilling platforms, which are very specific workplaces, a multi-aspect character, sociological and economic aspects, organizational culture conditions in the firm, and a tendency to conceal ailments and the stress experienced should be taken into account. It is important to apply measures referring to at least three different types of evidence (objective demands, subjective stress, health problems reported). Otherwise, the result reflecting work-related stress may not be objective and far from the truth.

Utility of a stressed-SNP real-time PCR assay for the rapid identification of measles vaccine strain in patient samples.

PubMed

Tran, Thomas; Kostecki, Renata; Catton, Michael; Druce, Julian

2018-05-09

Rapid differentiation of wild-type measles virus from measles vaccine strains is crucial during a measles outbreak and in a measles elimination setting. A real-time RT-PCR for the rapid detection of measles vaccine strains was developed with high specificity and greater sensitivity than when compared to traditional measles genotyping methods. The "stressed" minor grove binder TaqMan probe design approach achieves specificity to vaccine strains only, without compromising sensitivity. This assay has proven to be extremely useful in outbreak settings, without requiring sequence genotyping, for over 4 years at the Regional Measles Reference Laboratory for the Western Pacific Region. Copyright © 2018 Tran et al.

The stress-reducing effects of art in pediatric health care: art preferences of healthy children and hospitalized children.

PubMed

Eisen, Sarajane L; Ulrich, Roger S; Shepley, Mardelle M; Varni, James W; Sherman, Sandra

2008-09-01

Art is assumed to possess therapeutic benefits of healing for children, as part of patient-focused design in health care. Since the psychological and physiological well-being of children in health care settings is extremely important in contributing to the healing process, it is vitally important to identify what type of art supports stress reduction. Based on adult studies, nature art was anticipated to be the most preferred and to have stress-reducing effects on pediatric patients. Nature art refers to art images dominated by natural vegetation, flowers or water. The objective of this study was to investigate what type of art image children prefer, and what type of art image has potentially stress-reducing effects on children in hospitals. This study used a three-phase, multi-method approach with children aged 5-17 years: a focus group study (129 participants), a randomized study (48 participants), and a quasi-experimental study design (48 participants). Findings were evaluated from three phases.

Effect of Orem’s Self-Care Model on Perceived Stress in Adolescents with Asthma Referring the Asthma and Allergy Clinic, Isfahan, 2014

PubMed Central

Hemati, Zeinab; Abasi, Samira; Mosaviasl, Fatemehsadat; Shakerian, Behzad; Kiani, Davood

2016-01-01

Background: Incidence of asthma in adolescents leads to variations in family status, roles and interaction with peers for them, which could be a source of stress and psychological tensions in them. Therefore, the present study was conducted to investigate the effect of Orem’s self-care model on perceived stress in adolescents with asthma. Methods: In this semi-experimental study conducted from April 2013 to February 2014, 64 asthmatic adolescents referring Shariati Hospital, Isfahan were enrolled by simple random sampling and the patients were assigned to two groups of control and intervention. Then, Orem’s self-care model-based training was implemented throughout eight sessions of two hours each and the Cohen Perceived Stress Scale was administered to both groups prior to and two months after the completion of the training. The data were analyzed by descriptive and analytical statistics consisting of paired t-test, independent t-test, Chi-square and Mann-Whitney using SPSS Version 20. Results: Mean age of the participants was 14.15±3.12 years in the intervention group and 15.21±3.09 years in the control groups. 68.8% and 59.4% of the participants were male in the intervention and control groups, respectively. Independent t-test indicated a significant difference in the mean scores of perceived stress in the intervention (25.46±5.31) and control groups (28.90±5.27) after the training. Also, the result of paired t-test indicated a significant difference in the mean score of perceived stress between before (29.18±5.27) and after (25.46±5.31) training. Conclusion: As the training based on Orem’s model had a positive effect on declining perceived stress in asthmatic adolescents, continuation of using these training interventions could contribute to ultimately achieving positive outcomes in health functions of these patients. PMID:27382591

Application of several methods for determining transfer functions and frequency response of aircraft from flight data

NASA Technical Reports Server (NTRS)

Eggleston, John M; Mathews, Charles W

1954-01-01

In the process of analyzing the longitudinal frequency-response characteristics of aircraft, information on some of the methods of analysis has been obtained by the Langley Aeronautical Laboratory of the National Advisory Committee for Aeronautics. In the investigation of these methods, the practical applications and limitations were stressed. In general, the methods considered may be classed as: (1) analysis of sinusoidal response, (2) analysis of transient response as to harmonic content through determination of the Fourier integral by manual or machine methods, and (3) analysis of the transient through the use of least-squares solutions of the coefficients of an assumed equation for either the transient time response or frequency response (sometimes referred to as curve-fitting methods). (author)

Endocrine and metabolic dysfunction in yellow perch, Perca flavescens, exposed to organic contaminants and heavy metals in the St. Lawrence River

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hontela, A.; Duclos, D.; Fortin, R.

1995-04-01

The endocrine and biochemical responses to the acute stress of capture and handling were investigated in sexually mature and in immature male and female yellow perch, Perca flavescens, from a site contaminated by organic contaminants (PAHs and PCBs) and heavy metals (Hg, Cd, As, and Zn) and from a reference site in the St. Lawrence River. Following a standardized capture and handling stress, fish from the contaminated site did not exhibit the expected physiological stress response observed in fish from the reference site. Blood cortisol and thyroxine levels were lower, and liver glycogen stores were greater in mature males andmore » females, as well as in the immature fish from the contaminated site, compared to the reference site. Fish from the contaminated site also had smaller gonads and lower condition factor. The impaired ability to elevate blood cortisol in response to an acute stress may be used as a biomarker of toxic stress in health assessment of feral fish from polluted environments.« less

Studies on laws of stress-magnetization based on magnetic memory testing technique

NASA Astrophysics Data System (ADS)

Ren, Shangkun; Ren, Xianzhi

2018-03-01

Metal magnetic memory (MMM) testing technique is a novel testing method which can early test stress concentration status of ferromagnetic components. Under the different maximum tensile stress, the relationship between the leakage magnetic field of at certain point of cold rolled steel specimen and the tensile stress was measured during the process of loading and unloading by repeated. It shows that when the maximum tensile stress is less than 610 MPa, the relationship between the magnetic induction intensity and the stress is linear; When the maximum tensile stress increase from 610 MPa to 653 MPa of yield point, the relationship between the magnetic induction intensity and the tensile becomes bending line. The location of the extreme point of the bending line will move rapidly from the position of smaller stress to the larger stress position, and the variation of magnetic induction intensity increases rapidly. When the maximum tensile stress is greater than the 653 MPa of yield point, the variation of the magnetic induction intensity remains large, and the position of the extreme point moves very little. In theoretical aspects, tensile stress is to be divided into ordered stress and disordered stress. In the stage of elastic stress, a microscopic model of the order stress magnetization is established, and the conclusions are in good agreement with the experimental data. In the plastic deformation stage, a microscopic model of disordered stress magnetization is established, and the conclusions are in good agreement with the experimental data, too. The research results can provide reference for the accurate quantitative detection and evaluation of metal magnetic memory testing technology.

Parental functioning and pediatric sleep disturbance: an examination of factors associated with parenting stress in children clinically referred for evaluation of insomnia.

PubMed

Byars, Kelly C; Yeomans-Maldonado, Gloria; Noll, Jennie G

2011-10-01

Parenting stress is an aspect of parent functioning relevant in clinical settings. Within the context of behavioral sleep medicine, the role of parenting stress is not well understood. Prospective evaluation of patients 1.5-10 years old with insomnia. Subjects were 156 primary caregiver-child pairs who completed the Parenting Stress Index-Short Form (PSI-SF), Child Sleep Habits Questionnaire (CSHQ) and Child Behavior Checklist (CBCL). (1) determine prevalence of clinically significant parenting stress in primary caregivers of children clinically referred for insomnia; (2) identify childhood sleep problems that play a role in parenting stress; (3) identify relevant correlates of parenting stress within the context of a behavioral sleep medicine clinic; and (4) identify the most salient child sleep and behavioral variables associated with parenting stress. Forty-seven percent of primary caregivers had clinically significant parenting stress. When examining the relationship between child sleep problems and parenting stress, bedtime resistance (p=0.030) and daytime sleepiness (p=0.0003) stood alone as having the most salient associations with parenting stress. When considering a broader range of covariates (child age and child gender) and clinically relevant variables (parent history of sleep problems, parent history of psychiatric conditions, child behavior problems and child sleep problems) in a single regression equation, both child externalizing behavior problems (β=0.570, p<0.0001) and child daytime sleepiness (β=0.152, p=0.028) independently explained significant variability in parenting stress. Many primary caregivers of children clinically-referred for insomnia evaluation and treatment have significant parenting stress. Parenting stress is associated with daytime behavioral problems and sleepiness in children with insomnia. Clinicians working with pediatric insomnia patients should carefully evaluate parenting stress and child daytime behavior as these aspects of functioning may have an impact on service delivery and treatment outcomes. Copyright © 2011 Elsevier B.V. All rights reserved.

Characterizing heterogeneous properties of cerebral aneurysms with unknown stress-free geometry: a precursor to in vivo identification.

PubMed

Zhao, Xuefeng; Raghavan, Madhavan L; Lu, Jia

2011-05-01

Knowledge of elastic properties of cerebral aneurysms is crucial for understanding the biomechanical behavior of the lesion. However, characterizing tissue properties using in vivo motion data presents a tremendous challenge. Aside from the limitation of data accuracy, a pressing issue is that the in vivo motion does not expose the stress-free geometry. This is compounded by the nonlinearity, anisotropy, and heterogeneity of the tissue behavior. This article introduces a method for identifying the heterogeneous properties of aneurysm wall tissue under unknown stress-free configuration. In the proposed approach, an accessible configuration is taken as the reference; the unknown stress-free configuration is represented locally by a metric tensor describing the prestrain from the stress-free configuration to the reference configuration. Material parameters are identified together with the metric tensor pointwisely. The paradigm is tested numerically using a forward-inverse analysis loop. An image-derived sac is considered. The aneurysm tissue is modeled as an eightply laminate whose constitutive behavior is described by an anisotropic hyperelastic strain-energy function containing four material parameters. The parameters are assumed to vary continuously in two assigned patterns to represent two types of material heterogeneity. Nine configurations between the diastolic and systolic pressures are generated by forward quasi-static finite element analyses. These configurations are fed to the inverse analysis to delineate the material parameters and the metric tensor. The recovered and the assigned distributions are in good agreement. A forward verification is conducted by comparing the displacement solutions obtained from the recovered and the assigned material parameters at a different pressure. The nodal displacements are found in excellent agreement.

Essential features of residual stress determination in thin-walled plane structures in a base of whole field interferometric measurements

NASA Astrophysics Data System (ADS)

Pisarev, Vladimir S.; Odintsev, I.; Balalov, V.; Apalkov, A.

2003-05-01

Sophisticated technique for reliable quantitative deriving residual stress values from initial experimental data, which are inherent in combined implementing the hole drilling method with both holographic and speckle interferometry, is described in detail. The approach developed includes both possible ways of obtaining initial experimental information. The first of them consists of recording a set of required interference fringe patterns, which are resulted from residual stress energy release after through hole drilling, in two orthogonal directions that coincide with principal strain directions. The second way is obtaining a series of interrelated fringe patterns when a direction of either observation in reflection hologram interferometry or dual-beam illumination in speckle interferometry lies arbitrary with respect to definite principal strain direction. A set of the most typical both actual and analogous reference fringe patterns, which are related to both reflection hologram and dual-beam speckle interferometry, are presented.

Modified chloride diffusion model for concrete under the coupling effect of mechanical load and chloride salt environment

NASA Astrophysics Data System (ADS)

Lei, Mingfeng; Lin, Dayong; Liu, Jianwen; Shi, Chenghua; Ma, Jianjun; Yang, Weichao; Yu, Xiaoniu

2018-03-01

For the purpose of investigating lining concrete durability, this study derives a modified chloride diffusion model for concrete based on the odd continuation of boundary conditions and Fourier transform. In order to achieve this, the linear stress distribution on a sectional structure is considered, detailed procedures and methods are presented for model verification and parametric analysis. Simulation results show that the chloride diffusion model can reflect the effects of linear stress distribution of the sectional structure on the chloride diffusivity with reliable accuracy. Along with the natural environmental characteristics of practical engineering structures, reference value ranges of model parameters are provided. Furthermore, a chloride diffusion model is extended for the consideration of multi-factor coupling of linear stress distribution, chloride concentration and diffusion time. Comparison between model simulation and typical current research results shows that the presented model can produce better considerations with a greater universality.

[Nitrogen stress measurement of canola based on multi-spectral charged coupled device imaging sensor].

PubMed

Feng, Lei; Fang, Hui; Zhou, Wei-Jun; Huang, Min; He, Yong

2006-09-01

Site-specific variable nitrogen application is one of the major precision crop production management operations. Obtaining sufficient crop nitrogen stress information is essential for achieving effective site-specific nitrogen applications. The present paper describes the development of a multi-spectral nitrogen deficiency sensor, which uses three channels (green, red, near-infrared) of crop images to determine the nitrogen level of canola. This sensor assesses the nitrogen stress by means of estimated SPAD value of the canola based on canola canopy reflectance sensed using three channels (green, red, near-infrared) of the multi-spectral camera. The core of this investigation is the calibration methods between the multi-spectral references and the nitrogen levels in crops measured using a SPAD 502 chlorophyll meter. Based on the results obtained from this study, it can be concluded that a multi-spectral CCD camera can provide sufficient information to perform reasonable SPAD values estimation during field operations.

Simplified Model and Response Analysis for Crankshaft of Air Compressor

NASA Astrophysics Data System (ADS)

Chao-bo, Li; Jing-jun, Lou; Zhen-hai, Zhang

2017-11-01

The original model of crankshaft is simplified to the appropriateness to balance the calculation precision and calculation speed, and then the finite element method is used to analyse the vibration response of the structure. In order to study the simplification and stress concentration for crankshaft of air compressor, this paper compares calculative mode frequency and experimental mode frequency of the air compressor crankshaft before and after the simplification, the vibration response of reference point constraint conditions is calculated by using the simplified model, and the stress distribution of the original model is calculated. The results show that the error between calculative mode frequency and experimental mode frequency is controlled in less than 7%, the constraint will change the model density of the system, the position between the crank arm and the shaft appeared stress concentration, so the part of the crankshaft should be treated in the process of manufacture.

Chronic stress disrupts neural coherence between cortico-limbic structures.

PubMed

Oliveira, João Filipe; Dias, Nuno Sérgio; Correia, Mariana; Gama-Pereira, Filipa; Sardinha, Vanessa Morais; Lima, Ana; Oliveira, Ana Filipa; Jacinto, Luís Ricardo; Ferreira, Daniela Silva; Silva, Ana Maria; Reis, Joana Santos; Cerqueira, João José; Sousa, Nuno

2013-01-01

Chronic stress impairs cognitive function, namely on tasks that rely on the integrity of cortico-limbic networks. To unravel the functional impact of progressive stress in cortico-limbic networks we measured neural activity and spectral coherences between the ventral hippocampus (vHIP) and the medial prefrontal cortex (mPFC) in rats subjected to short term stress (STS) and chronic unpredictable stress (CUS). CUS exposure consistently disrupted the spectral coherence between both areas for a wide range of frequencies, whereas STS exposure failed to trigger such effect. The chronic stress-induced coherence decrease correlated inversely with the vHIP power spectrum, but not with the mPFC power spectrum, which supports the view that hippocampal dysfunction is the primary event after stress exposure. Importantly, we additionally show that the variations in vHIP-to-mPFC coherence and power spectrum in the vHIP correlated with stress-induced behavioral deficits in a spatial reference memory task. Altogether, these findings result in an innovative readout to measure, and follow, the functional events that underlie the stress-induced reference memory impairments.

Logging affects fledgling sex ratios and baseline corticosterone in a forest songbird.

PubMed

Leshyk, Rhiannon; Nol, Erica; Burke, Dawn M; Burness, Gary

2012-01-01

Silviculture (logging) creates a disturbance to forested environments. The degree to which forests are modified depends on the logging prescription and forest stand characteristics. In this study we compared the effects of two methods of group-selection ("moderate" and "heavy") silviculture (GSS) and undisturbed reference stands on stress and offspring sex ratios of a forest interior species, the Ovenbird (Seiurus aurocapilla), in Algonquin Provincial Park, Canada. Blood samples were taken from nestlings for corticosterone and molecular sexing. We found that logging creates a disturbance that is stressful for nestling Ovenbirds, as illustrated by elevated baseline corticosterone in cut sites. Ovenbirds nesting in undisturbed reference forest produce fewer male offspring per brood (proportion male = 30%) while logging with progressively greater forest disturbance, shifted the offspring sex ratio towards males (proportion male: moderate = 50%, heavy = 70%). If Ovenbirds in undisturbed forests usually produce female-biased broods, then the production of males as a result of logging may disrupt population viability. We recommend a broad examination of nestling sex ratios in response to anthropogenic disturbance to determine the generality of our findings.

Evaluation and Selection of Candidate Reference Genes for Normalization of Quantitative RT-PCR in Withania somnifera (L.) Dunal

PubMed Central

Singh, Varinder; Kaul, Sunil C.; Wadhwa, Renu; Pati, Pratap Kumar

2015-01-01

Quantitative real-time PCR (qRT-PCR) is now globally used for accurate analysis of transcripts levels in plants. For reliable quantification of transcripts, identification of the best reference genes is a prerequisite in qRT-PCR analysis. Recently, Withania somnifera has attracted lot of attention due to its immense therapeutic potential. At present, biotechnological intervention for the improvement of this plant is being seriously pursued. In this background, it is important to have comprehensive studies on finding suitable reference genes for this high valued medicinal plant. In the present study, 11 candidate genes were evaluated for their expression stability under biotic (fungal disease), abiotic (wounding, salt, drought, heat and cold) stresses, in different plant tissues and in response to various plant growth regulators (methyl jasmonate, salicylic acid, abscisic acid). The data as analyzed by various software packages (geNorm, NormFinder, Bestkeeper and ΔCt method) suggested that cyclophilin (CYP) is a most stable gene under wounding, heat, methyl jasmonate, different tissues and all stress conditions. T-SAND was found to be a best reference gene for salt and salicylic acid (SA) treated samples, while 26S ribosomal RNA (26S), ubiquitin (UBQ) and beta-tubulin (TUB) were the most stably expressed genes under drought, biotic and cold treatment respectively. For abscisic acid (ABA) treated samples 18S-rRNA was found to stably expressed gene. Finally, the relative expression level of the three genes involved in the withanolide biosynthetic pathway was detected to validate the selection of reliable reference genes. The present work will significantly contribute to gene analysis studies in W. somnifera and facilitate in improving the quality of gene expression data in this plant as well as and other related plant species. PMID:25769035

Improving the Efficiency of Abdominal Aortic Aneurysm Wall Stress Computations

PubMed Central

Zelaya, Jaime E.; Goenezen, Sevan; Dargon, Phong T.; Azarbal, Amir-Farzin; Rugonyi, Sandra

2014-01-01

An abdominal aortic aneurysm is a pathological dilation of the abdominal aorta, which carries a high mortality rate if ruptured. The most commonly used surrogate marker of rupture risk is the maximal transverse diameter of the aneurysm. More recent studies suggest that wall stress from models of patient-specific aneurysm geometries extracted, for instance, from computed tomography images may be a more accurate predictor of rupture risk and an important factor in AAA size progression. However, quantification of wall stress is typically computationally intensive and time-consuming, mainly due to the nonlinear mechanical behavior of the abdominal aortic aneurysm walls. These difficulties have limited the potential of computational models in clinical practice. To facilitate computation of wall stresses, we propose to use a linear approach that ensures equilibrium of wall stresses in the aneurysms. This proposed linear model approach is easy to implement and eliminates the burden of nonlinear computations. To assess the accuracy of our proposed approach to compute wall stresses, results from idealized and patient-specific model simulations were compared to those obtained using conventional approaches and to those of a hypothetical, reference abdominal aortic aneurysm model. For the reference model, wall mechanical properties and the initial unloaded and unstressed configuration were assumed to be known, and the resulting wall stresses were used as reference for comparison. Our proposed linear approach accurately approximates wall stresses for varying model geometries and wall material properties. Our findings suggest that the proposed linear approach could be used as an effective, efficient, easy-to-use clinical tool to estimate patient-specific wall stresses. PMID:25007052

Numerical study on air-structure coupling dynamic characteristics of the axial fan blade

NASA Astrophysics Data System (ADS)

Chen, Q. G.; Xie, B.; Li, F.; Gu, W. G.

2013-12-01

In order to understand the dynamic characteristics of the axial-flow fan blade due to the effect of rotating stress and the action of unsteady aerodynamic forces caused by the airflow, a numerical simulation method for air-structure coupling in an axial-flow fan with fixed rear guide blades was performed. The dynamic characteristics of an axial-flow fan rotating blade were studied by using the two-way air-structure coupling method. Based on the standard k-ε turbulence model, and using weak coupling method, the preceding six orders modal parameters of the rotating blade were obtained, and the distributions of stress and strain on the rotating blade were presented. The results show that the modal frequency from the first to the sixth order is 3Hz higher than the modal frequency without considering air-structure coupling interaction; the maximum stress and the maximum strain are all occurred in the vicinity of root area of the blade no matter the air-structure coupling is considered or not, thus, the blade root is the dangerous location subjected to fatigue break; the position of maximum deformation is at the blade tip, so the vibration of the blade tip is significant. This study can provide theoretical references for the further study on the strength analysis and mechanical optimal design.

Natural products targeting ER stress pathway for the treatment of cardiovascular diseases.

PubMed

Choy, Ker Woon; Murugan, Dharmani; Mustafa, Mohd Rais

2018-04-21

Endoplasmic reticulum (ER) is the main organelle for the synthesis, folding, and processing of secretory and transmembrane proteins. Pathological stimuli including hypoxia, ischaemia, inflammation and oxidative stress interrupt the homeostatic function of ER, leading to accumulation of unfolded proteins, a condition referred to as ER stress. ER stress triggers a complex signalling network referred as the unfolded protein response (UPR). Extensive studies have demonstrated that ER stress plays an important role in the pathogenesis of various cardiovascular diseases such as heart failure, ischemic heart disease and atherosclerosis. The importance of natural products in modern medicine are well recognized and continues to be of interests as a source of novel lead compounds. Natural products targeting components of UPR and reducing ER stress offers an innovative strategic approach to treat cardiovascular diseases. In this review, we discussed several therapeutic interventions using natural products with potential cardiovascular protective properties targeting ER stress signalling pathways. Copyright © 2018 Elsevier Ltd. All rights reserved.

Evaluation of stability and validation of reference genes for RT-qPCR expression studies in rice plants under water deficit.

PubMed

Auler, Priscila Ariane; Benitez, Letícia Carvalho; do Amaral, Marcelo Nogueira; Vighi, Isabel Lopes; Dos Santos Rodrigues, Gabriela; da Maia, Luciano Carlos; Braga, Eugenia Jacira Bolacel

2017-05-01

Many studies use strategies that allow for the identification of a large number of genes expressed in response to different stress conditions to which the plant is subjected throughout its cycle. In order to obtain accurate and reliable results in gene expression studies, it is necessary to use reference genes, which must have uniform expression in the majority of cells in the organism studied. RNA isolation of leaves and expression analysis in real-time quantitative polymerase chain reaction (RT-qPCR) were carried out. In this study, nine candidate reference genes were tested, actin 11 (ACT11), ubiquitin conjugated to E2 enzyme (UBC-E2), glyceraldehyde-3-phosphate dehydrogenase (GAPDH), beta tubulin (β-tubulin), eukaryotic initiation factor 4α (eIF-4α), ubiquitin 10 (UBQ10), ubiquitin 5 (UBQ5), aquaporin TIP41 (TIP41-Like) and cyclophilin, in two genotypes of rice, AN Cambará and BRS Querência, with different levels of soil moisture (20%, 10% and recovery) in the vegetative (V5) and reproductive stages (period preceding flowering). Currently, there are different softwares that perform stability analyses and define the most suitable reference genes for a particular study. In this study, we used five different methods: geNorm, BestKeeper, ΔCt method, NormFinder and RefFinder. The results indicate that UBC-E2 and UBQ5 can be used as reference genes in all samples and softwares evaluated. The genes β-tubulin and eIF-4α, traditionally used as reference genes, along with GAPDH, presented lower stability values. The gene expression of basic leucine zipper (bZIP23 and bZIP72) was used to validate the selected reference genes, demonstrating that the use of an inappropriate reference can induce erroneous results.

Development and Use of Mark Sense Record Cards for Recording Medical Data on Pilots Subjected to Acceleration Stress

NASA Technical Reports Server (NTRS)

Smedal, Harald A.; Havill, C. Dewey

1962-01-01

A TIME-HONORED system of recording medical histories and the data obtained on physical and laboratory examination has been that of writing the information on record sheets that go into a folder for each patient. In order to have information which would be more readily retrieved, 'a program was initiated in 1952 by the U. S. Naval School of Aviation Medicine in connection with their "Care of the Flyer" study to place this information on machine record cards. In 1958, a machine record card method was developed for recording medical data in connection with the astronaut selection program. Machine record cards were also developed by the Aero Medical Laboratory, Wright-Patterson AFB, Ohio, and the Aviation Medical Acceleration Laboratory, Naval Air Development Center, Johnsville, Pennsylvania, for use in connection with a variety of tests including acceleration stress.1 Therefore, a variety of systems resulted in which data of a medical nature could easily be recalled. During the NASA, Ames Research Center centrifuge studies/'S the pilot subjects were interviewed after each centrifuge run, or series of runs, and subjective information was recorded in a log book by the usual history taking methods referred to above. After the methods Were reviewed, it' was recognized that a card system would be very useful in recording data from our pilots after they had been exposed to acceleration stress. Since the acceleration stress cards already developed did not meet our requirements, it was decided a different card was needed.

[Stress and psychotic transition: A literature review].

PubMed

Chaumette, B; Kebir, O; Mam Lam Fook, C; Bourgin, J; Godsil, B P; Gaillard, R; Jay, T M; Krebs, M-O

2016-08-01

Psychiatric disorders are consistent with the gene x environment model, and non-specific environmental factors such as childhood trauma, urbanity, and migration have been implicated. All of these factors have in common to dysregulate the biological pathways involved in response to stress. Stress is a well-known precipitating factor implicated in psychiatric disorders such as depression, bipolar disorder, anxiety, and possibly schizophrenia. More precisely, psychosocial stress induces dysregulation of the hypothalamic-pituitary-adrenal axis (HPA) and could modify neurotransmission, which raises the question of the involvement of stress-related biological changes in psychotic disorders. Indeed, the literature reveals dysregulation of the HPA axis in schizophrenia. This dysregulation seems to be present in the prodromal phases (UHR subjects for ultra-high risk) and early schizophrenia (FEP for first episode psychosis). Thus, and following the stress-vulnerability model, stress could act directly on psychotic onset and precipitate the transition of vulnerable subjects to a full-blown psychosis. The present paper reviews the literature on stress and onset of schizophrenia, with consideration for the causal role vs. associated role of HPA axis dysregulation in schizophrenia and the factors that influence it, in particular during prodromal and earlier phases. We also discuss different methods developed to measure stress in humans. We performed a bibliographic search using the keywords 'cortisol', 'glucocorticoid', 'HPA' with 'UHR', 'CHR', 'at-risk mental state', 'first episode psychosis', 'schizotypal', 'prodromal schizophrenia' in Medline, Web of Knowledge (WOS), and EBSCO completed by a screening of the references of the selected articles. Stress has been studied for many years in schizophrenia, either by subjective methods (questionnaires), or objective methods (standardized experimental protocols) with biological sampling and/or brain imaging methods. These methods have suggested a link between dysregulation of the HPA axis and psychotic symptoms both through abnormal basal levels of cortisol and flattened reactivity to social stress. Imaging results suggest indirect modifications, including abnormal pituitary or hippocampal volume. Several factors dysregulating the HPA axis have also been highlighted, such as consumption of drugs (i.e. cannabis), childhood trauma or genetic factors (such as COMT, or MTHFR variants). Psychological stress induces subcortical dopaminergic activation attributable to hypothalamic-pituitary-adrenal (HPA) axis dysregulation. This dysregulation is present in the prodromal phase (UHR) in patients who have experienced a first psychotic episode (FEP) and in siblings of schizophrenic patients. Stress dysregulation is a plausible hypothesis to understand the psychosis onset. The effect of stress on brain pathways could participate to the mechanisms underlying the onset of psychotic symptoms, both as a precipitating factor and as a marker of a predisposing vulnerability. This dysregulation fits into the gene x environment model: in subjects with genetic predispositions, stressful environmental factors can modify biological pathways implicated in psychiatric disorders, promoting the emergence of symptoms. However, many confounding factors obscure the literature, and further studies are needed in schizophrenic patients, UHR and FEP patients to clarify the precise role of stress in psychotic transition. Identification of stress biomarkers could help diagnosis and prognosis, and pave the way for specific care strategies based on stress-targeted therapies. Copyright © 2016 L’Encéphale, Paris. Published by Elsevier Masson SAS. All rights reserved.

Allele specific expression analysis identifies regulatory variation associated with stress-related genes in the Mexican highland maize landrace Palomero Toluqueño

PubMed Central

González-Segovia, Eric; Ross-Ibarra, Jeffrey; Simpson, June K.

2017-01-01

Background Gene regulatory variation has been proposed to play an important role in the adaptation of plants to environmental stress. In the central highlands of Mexico, farmer selection has generated a unique group of maize landraces adapted to the challenges of the highland niche. In this study, gene expression in Mexican highland maize and a reference maize breeding line were compared to identify evidence of regulatory variation in stress-related genes. It was hypothesised that local adaptation in Mexican highland maize would be associated with a transcriptional signature observable even under benign conditions. Methods Allele specific expression analysis was performed using the seedling-leaf transcriptome of an F1 individual generated from the cross between the highland adapted Mexican landrace Palomero Toluqueño and the reference line B73, grown under benign conditions. Results were compared with a published dataset describing the transcriptional response of B73 seedlings to cold, heat, salt and UV treatments. Results A total of 2,386 genes were identified to show allele specific expression. Of these, 277 showed an expression difference between Palomero Toluqueño and B73 alleles under benign conditions that anticipated the response of B73 cold, heat, salt and/or UV treatments, and, as such, were considered to display a prior stress response. Prior stress response candidates included genes associated with plant hormone signaling and a number of transcription factors. Construction of a gene co-expression network revealed further signaling and stress-related genes to be among the potential targets of the transcription factors candidates. Discussion Prior activation of responses may represent the best strategy when stresses are severe but predictable. Expression differences observed here between Palomero Toluqueño and B73 alleles indicate the presence of cis-acting regulatory variation linked to stress-related genes in Palomero Toluqueño. Considered alongside gene annotation and population data, allele specific expression analysis of plants grown under benign conditions provides an attractive strategy to identify functional variation potentially linked to local adaptation. PMID:28852597

Effects of Stress After Hurricanes Katrina and Rita on Pubertal Disorders in Children

PubMed Central

Ponnapakkam, Adharsh; Gensure, Robert

2008-01-01

Hurricanes Katrina and Rita caused widespread damage that resulted in increased stress levels for families living in the New Orleans area. This study examined the relationship between this stress and the onset of puberty in children by conducting a retrospective chart review of patients referred before and after the storm to a pediatric endocrine practice in New Orleans. The total number of new patients referred and the incidence of diagnoses that are unlikely to be affected by stress (ie, thyroid disease and premature adrenarche) were essentially unchanged. On the other hand, the incidence of central precocious puberty decreased by 52% after the storm, while the incidence of pubertal delay increased by 9% in the post storm period. This study thus provides evidence that stress delays the onset of puberty in children. PMID:21603464

Reference ranges for cortisol and α-amylase in mother and newborn saliva samples at different perinatal and postnatal periods.

PubMed

García-Blanco, Ana; Vento, Máximo; Diago, Vicente; Cháfer-Pericás, Consuelo

2016-06-01

This paper describes a reliable analytical method based on Ultra High-Performance Liquid Chromatography coupled to tandem mass spectrometry to determine cortisol in saliva samples from healthy mothers (n=87) and newborns (n=65) at different time points: (i) 38 weeks of gestation, (ii) in the immediate postnatal period (48h) after a term delivery and, (iii) 3 months after delivery. The procedure is characterized by a simple sample treatment employing a sample volume of 25μL. In addition to this, salivary α-amylase was determined using a commercial kit. We have proposed potential reference ranges in saliva for cortisol (0.7-35nmolL(-1)) and α-amylase (2-500UmL(-1)) in mothers, and for cortisol (0.1-56nmolL(-1)) and α-amylase (0.1-500UmL(-1)) in newborn infants. In addition, statistical differences between the two sensitive population groups (mothers and newborns) at the perinatal and postnatal periods were studied. A lower concentration for maternal cortisol was found at 38 weeks of gestation than at 48h (p=0.048) or 3 months after delivery (p=0.021). Similar results were found for the α-amylase determinations. Hence, higher concentrations than could be expected from a chronic stress marker were found at 3 months after delivery than at 38 weeks of gestation (p<0.001) or 48h after delivery (p<0.001). We conclude that this analytical method could be applied to further clinical research on perinatal and postnatal stress, such as threatened preterm labor and/or parenting stress, respectively. Copyright © 2016 Elsevier B.V. All rights reserved.

[Influence of sociodemographic variables on coping styles, social stress, and sexual sensation seeking in adolescents].

PubMed

de la Paz Bermúdez, María; Teva, Inmaculada; Buela-Casal, Gualberto

2009-05-01

The aim of this study is to analyze the influence of gender, age, and type of high school (public/private) on coping styles solve the problem coping style, reference to others coping style and non-productive coping, social stress, and sexual sensation seeking in adolescents. A total of 4.456 adolescents participated. The following measures were used: Adolescent Coping Scale, Sexual Sensation Seeking Scale, and the Social Stress subscale of the Behavior Assessment System for Children. This is a cross-sectional study that used a stratified random sampling considering Spanish regions and type of high school (public/private) to select participants. The sample is representative of the national level at a 95.5% confidence interval. Results showed that males had higher scores in sexual sensation seeking and social stress compared to females. Female adolescents scored higher in reference to others coping style and non-productive coping. Compared to adolescents of public high schools, adolescents who attended to private high schools scored higher in solve the problem coping style and reference to others coping style. Associations among sexual sensation seeking, coping styles, social stress, and health risk behaviors in adolescents are discussed.

Differential surface stress sensor for detection of chemical and biological species

NASA Astrophysics Data System (ADS)

Kang, K.; Nilsen-Hamilton, M.; Shrotriya, P.

2008-10-01

We report a sensor consisting of two micromachined cantilevers (a sensing/reference pair) that is suitable for detection of chemical and biological species. The sensing strategy involves coating the sensing cantilever with receptors that have high affinities for the analyte. The presence of analyte is detected by determining the differential surface stress associated with its adsorption/absorption to the sensing cantilever. An interferometric technique is utilized to measure the differential bending of the sensing cantilever with respect to reference. Surface stress associated with hybridization of single stranded DNA is measured to demonstrate the unique advantages of the sensor.

Quality control for quantitative PCR based on amplification compatibility test.

PubMed

Tichopad, Ales; Bar, Tzachi; Pecen, Ladislav; Kitchen, Robert R; Kubista, Mikael; Pfaffl, Michael W

2010-04-01

Quantitative qPCR is a routinely used method for the accurate quantification of nucleic acids. Yet it may generate erroneous results if the amplification process is obscured by inhibition or generation of aberrant side-products such as primer dimers. Several methods have been established to control for pre-processing performance that rely on the introduction of a co-amplified reference sequence, however there is currently no method to allow for reliable control of the amplification process without directly modifying the sample mix. Herein we present a statistical approach based on multivariate analysis of the amplification response data generated in real-time. The amplification trajectory in its most resolved and dynamic phase is fitted with a suitable model. Two parameters of this model, related to amplification efficiency, are then used for calculation of the Z-score statistics. Each studied sample is compared to a predefined reference set of reactions, typically calibration reactions. A probabilistic decision for each individual Z-score is then used to identify the majority of inhibited reactions in our experiments. We compare this approach to univariate methods using only the sample specific amplification efficiency as reporter of the compatibility. We demonstrate improved identification performance using the multivariate approach compared to the univariate approach. Finally we stress that the performance of the amplification compatibility test as a quality control procedure depends on the quality of the reference set. Copyright 2010 Elsevier Inc. All rights reserved.

Reference range of blood biomarkers for oxidative stress in Thoroughbred racehorses (2–5 years old)

PubMed Central

KUSANO, Kanichi; YAMAZAKI, Masahiko; KIUCHI, Masataka; KANEKO, Kouki; KOYAMA, Katsuhiro

2016-01-01

ABSTRACT The oxidant and antioxidant equilibrium is known to play an important role in equine medicine and equine exercise physiology. There are abundant findings in this field; however, not many studies have been conducted for reference ranges of oxidative stress biomarkers in horses. This study was conducted to determine the reference values of reactive oxygen metabolites (d-ROMs) and biological antioxidant potential (BAP) using blood samples from 372 (191 males, 181 females) Thoroughbred racehorse aged 2 to 5 (3.43 ± 1.10 (mean ± SD)) years old. There were obvious gender differences in oxidative biomarkers, and growth/age-related changes were observed especially in females. Gender and age must be considered when interpreting obtained oxidative stress biomarkers for diagnosis of disease or fitness alterations in Thoroughbred racehorses. PMID:27703408

Two-body potential model based on cosine series expansion for ionic materials

DOE PAGES

Oda, Takuji; Weber, William J.; Tanigawa, Hisashi

2015-09-23

There is a method to construct a two-body potential model for ionic materials with a Fourier series basis and we examine it. For this method, the coefficients of cosine basis functions are uniquely determined by solving simultaneous linear equations to minimize the sum of weighted mean square errors in energy, force and stress, where first-principles calculation results are used as the reference data. As a validation test of the method, potential models for magnesium oxide are constructed. The mean square errors appropriately converge with respect to the truncation of the cosine series. This result mathematically indicates that the constructed potentialmore » model is sufficiently close to the one that is achieved with the non-truncated Fourier series and demonstrates that this potential virtually provides minimum error from the reference data within the two-body representation. The constructed potential models work appropriately in both molecular statics and dynamics simulations, especially if a two-step correction to revise errors expected in the reference data is performed, and the models clearly outperform two existing Buckingham potential models that were tested. Moreover, the good agreement over a broad range of energies and forces with first-principles calculations should enable the prediction of materials behavior away from equilibrium conditions, such as a system under irradiation.« less

Teacher Stress and Guidance Work in Hong Kong Secondary School Teachers.

ERIC Educational Resources Information Center

Hui, Eadaoin, K. P.; Chan, David W.

1996-01-01

Sources of stress in Hong Kong teachers were investigated, with specific reference to guidance work as a potential source of stress. A survey of 415 secondary school teachers revealed guidance-related aspects of work constituted a major dimension of stress, with guidance teachers, female teachers, younger teachers and junior teachers perceiving…

Horizontal stress in planetary lithospheres from vertical processes

NASA Technical Reports Server (NTRS)

Banerdt, W. B.

1991-01-01

Understanding the stress states in a lithosphere is of fundamental importance for planetary geophysics. It is closely linked to the processes which form and modify tectonic features on the surface and reflects the behavior of the planet's interior, providing a constraint for the difficult problem of determining interior structure and processes. The tectonics on many extraterrestrial bodies (Moon, Mars, and most of the outer planet satellites) appears to be mostly vertical, and the horizontal stresses induced by vertical motions and loads are expected to dominate the deformation of their lithospheres. Herein, only changes are examined in the state of stress induced by processes such as sedimentary and volcanic deposition, erosional denudation, and changes in the thermal gradient that induce uplift or subsidence. This analysis is important both for evaluating stresses for specific regions in which the vertical stress history can be estimated, as well as for applying the proper loading conditions to global stress models. All references to lithosphere herein should be understood to refer to the elastic lithosphere, that layer which deforms elastically or brittlely when subjected to geologically scaled stresses.

Body size and growth: the significance of chronic malnutrition among the Casiguran Agta.

PubMed

De Souza, Roberta G

2006-01-01

The Agta are a short statured, hunter-gatherer population who have been living under demographic and environmental stress. This article shows the influence of these factors and the resulting nutritional deficiency on the anthropometric measurements and mortality of Agta individuals. The joint analysis of cross-sectional measurements of Agta children and adults and of the mortality schedules in this population aims to stress the influence of environmental pressures on the ongoing evolution of short stature. Recumbent length, height, weight, mid-upper arm circumference, and triceps skinfolds were taken using standard methods from a total of 253 Agta individuals. Exact or nearly exact ages were taken from a long-term demographic database. z-Scores and growth curves were calculated using the NutStat program and 2000 CDC reference. Mortality schedules are from published material, improved through interviews in the field. Agta individuals are both short and thin when compared to other populations. Thirty-four per cent of the adults are under-nourished, while 17% of the children are wasted, according to international standards. A major and delayed peak of mortality in early infancy overlaps with a period of average decrease in body length in relation to the reference. Demographic indicators of poor health-related quality of life are consistent with slowed patterns of growth observed, stressing the importance of environmental pressure in maintaining the short stature of the Agta population.

Medial Tibial Stress Syndrome: Evidence-Based Prevention

PubMed Central

Craig, Debbie I

2008-01-01

Reference: Thacker SB, Gilchrist J, Stroup DF, Kimsey CD. The prevention of shin splints in sports: a systematic review of literature. Med Sci Sports Exerc. 2002;34(1):32–40. Clinical Question: Among physically active individuals, which medial tibial stress syndrome (MTSS) prevention methods are most effective to decrease injury rates? Data Sources: Studies were identified by searching MEDLINE (1966–2000), Current Contents (1996–2000), Biomedical Collection (1993–1999), and Dissertation Abstracts. Reference lists of identified studies were searched manually until no further studies were identified. Experts in the field were contacted, including first authors of randomized controlled trials addressing prevention of MTSS. The Cochrane Collaboration (early stage of Cochrane Database of Systematic Reviews) was contacted. Study Selection: Inclusion criteria included randomized controlled trials or clinical trials comparing different MTSS prevention methods with control groups. Excluded were studies that did not provide primary research data or that addressed treatment and rehabilitation rather than prevention of incident MTSS. Data Extraction: A total of 199 citations were identified. Of these, 4 studies compared prevention methods for MTSS. Three reviewers independently scored the 4 studies. Reviewers were blinded to the authors' names and affiliations but not the results. Each study was evaluated independently for methodologic quality using a 100-point checklist. Final scores were averages of the 3 reviewers' scores. Main Results: Prevention methods studied were shock-absorbent insoles, foam heel pads, Achilles tendon stretching, footwear, and graduated running programs. No statistically significant results were noted for any of the prevention methods. Median quality scores ranged from 29 to 47, revealing flaws in design, control for bias, and statistical methods. Conclusions: No current evidence supports any single prevention method for MTSS. The most promising outcomes support the use of shock-absorbing insoles. Well-designed and controlled trials are critically needed to decrease the incidence of this common injury. PMID:18523568

Researching on Control Device of Prestressing Wire Reinforcement

NASA Astrophysics Data System (ADS)

Si, Jianhui; Guo, Yangbo; Liu, Maoshe

2017-06-01

This paper mainly introduces a device for controlling prestress and its related research methods, the advantage of this method is that the reinforcement process is easy to operate and control the prestress of wire rope accurately. The relationship between the stress and strain of the steel wire rope is monitored during the experiment, and the one - to - one relationship between the controllable position and the pretightening force of the steel wire rope is confirmed by the 5mm steel wire rope, and the results are analyzed theoretically by the measured elastic modulus. The results show that the method can effectively control the prestressing force, and the result provides a reference method for strengthening the concrete column with prestressed steel strand.

Examining Factor Structure and Validating the Persian Version of the Pregnancy’s Worries and Stress Questionnaire for Pregnant Iranian Women

PubMed Central

Navidpour, Fariba; Dolatian, Mahrokh; Yaghmaei, Farideh; Majd, Hamid Alavi; Hashemi, Seyed Saeed

2015-01-01

Background and Objectives: Pregnant women tend to experience anxiety and stress when faced with the changes to their biology, environment and personal relationships. The identification of these factors and the prevention of their side effects are vital for both mother and fetus. The present study was conducted to validate and to examine the factor structure of the Persian version of the Pregnancy’s Worries and Stress Questionnaire. Materials and Methods: The 25-item PWSQ was first translated by specialists into Persian. The questionnaire’s validity was determined using face, content, criterion and construct validity and reliability of questionnaire was examined using Cronbach’s alpha. Confirmatory factor analysis was performed in AMOS and SPSS 21. Participants included healthy Iranian pregnant women (8-39 weeks) who refer to selected hospitals for prenatal care. Hospitals included private, social security and university hospitals and selected through the random cluster sampling method. Findings: The results of validity and reliability assessments of the questionnaire were acceptable. Cronbach’s alpha calculated showed a high internal consistency of 0.89. The confirmatory factor analysis using the χ2, CMIN/DF, IFI, CFI, NFI and NNFI indexes showed the 6-factor model to be the best fitted model for explaining the data. Conclusion: The questionnaire was translated into Persian to examine stress and worry specific to Iranian pregnant women. The psychometric results showed that the questionnaire is suitable for identifying Iranian pregnant women with pregnancy-related stress. PMID:26153186

Comparison of Effectiveness of the Metacognition Treatment and the Mindfulness-Based Stress Reduction Treatment on Global and Specific Life Quality of Women with Breast Cancer

PubMed Central

Rahmani, Soheila; Talepasand, Siavash; Ghanbary-Motlagh, ALi

2014-01-01

Background This study is conducted to compare the metacognition treatment and the mindfulness-based stress reduction treatment on life quality of women with breast cancer. Methods In a quasi-experimental design, with pre-test, post-test and control group, 36 patients with diagnosis of breast cancer, among patients who referred to the Division of Oncology and Radiotherapy of Imam Hossein hospital in Tehran, were selected in accessible way and were assigned randomly to three experimental groups, the first group receiving meta-cognition treatment (n=12), the second one receiving mindfulness-based stress reduction program (n=12), and the other was the control group. Participants completed global life quality in cancer patient's questionnaire and specific quality of life in breast cancer patient's questionnaire in three stages: baseline, after intervention and two-month follow-up. Data were analyzed using the multivariate repeated measurement model. Results Findings showed both treatments were effective in improving global and specific quality of life in patients with breast cancer. The mindfulness -based stress reduction treatment excelled in functions and roles, fatigue, pain, future perspective and treatment side effects symptoms at the end of the treatment and follow-up in comparison to the metacognition treatment. Conclusion Results of this research showed the mindfulness-based stress reduction treatment can be effective in improving global and specific life quality of women with breast cancer and is a selective method for improving quality of life in patients. PMID:25628839

Stress field modeling of the Carpathian Basin based on compiled tectonic maps

NASA Astrophysics Data System (ADS)

Albert, Gáspár; Ungvári, Zsuzsanna; Szentpéteri, Krisztián

2014-05-01

The estimation of the stress field in the Carpathian Basin is tackled by several authors. Their modeling methods usually based on measurements (borehole-, focal mechanism- and geodesic data) and the result is a possible structural pattern of the region. Our method works indirectly: the analysis is aimed to project a possible 2D stress field over the already mapped/known/compiled lineament pattern. This includes a component-wise interpolation of the tensor-field, which is based on the generated irregular point cloud in the puffer zone of the mapped lineaments. The interpolated values appear on contour and tensor maps, and show the relative stress field of the area. In 2006 Horváth et al. compiled the 'Atlas of the present-day geodynamics of the Pannonian basin'. To test our method we processed the lineaments of the 1:1 500 000 scale 'Map of neotectonic (active) structures' published in this atlas. The geodynamic parameters (i.e. normal, reverse, right- and left lateral strike-slip faults, etc.) of the lines on this map were mostly explained in the legend. We classified the linear elements according to these parameters and created a geo-referenced mapping database. This database contains the polyline sections of the map lineaments as vectors (i.e. line sections), and the directions of the stress field as attributes of these vectors. The directions of the dip-parallel-, strike-parallel- and vertical stress-vectors are calculated from the geodynamical parameters of the line section. Since we created relative stress field properties, the eigenvalues of the vectors were maximized to one. Each point in the point cloud inherits the stress property of the line section, from which it was derived. During the modeling we tried several point-cloud generating- and interpolation methods. The analysis of the interpolated tensor fields revealed that the model was able to reproduce a geodynamic synthesis of the Carpathian Basin, which can be correlated with the synthesis of the Atlas published in 2006. The method was primarily aimed to reconstruct paleo-stress fields. References Horváth, F., Bada, G., Windhoffer, G., Csontos, L., Dombrádi, E., Dövényi, P., Fodor, L., Grenerczy, G., Síkhegyi, F., Szafián, P., Székely, B., Timár, G., Tóth, L., Tóth, T. 2006: Atlas of the present-day geodynamics of the Pannonian basin: Euroconform maps with explanatory text. Magyar Geofizika 47, 133-137.

A novel method of temperature compensation for piezoresistive microcantilever-based sensors.

PubMed

Han, Jianqiang; Wang, Xiaofei; Yan, Tianhong; Li, Yan; Song, Meixuan

2012-03-01

Microcantilever with integrated piezoresistor has been applied to in situ surface stress measurement in the field of biochemical sensors. It is well known that piezoresistive cantilever-based sensors are sensitive to ambient temperature changing due to highly temperature-dependent piezoresistive effect and mismatch in thermal expansion of composite materials. This paper proposes a novel method of temperature drift compensation for microcantilever-based sensors with a piezoresistive full Wheatstone bridge integrated at the clamped ends by subtracting the amplified output voltage of the reference cantilever from the output voltage of the sensing cantilever through a simple temperature compensating circuit. Experiments show that the temperature drift of microcantilever sensors can be significantly reduced by the method.

Variation in the reference Shields stress for bed load transport in gravel‐bed streams and rivers

USGS Publications Warehouse

Mueller, Erich R.; Pitlick, John; Nelson, Jonathan M.

2005-01-01

The present study examines variations in the reference shear stress for bed load transport (τr) using coupled measurements of flow and bed load transport in 45 gravel‐bed streams and rivers. The study streams encompass a wide range in bank‐full discharge (1–2600 m3/s), average channel gradient (0.0003–0.05), and median surface grain size (0.027–0.21 m). A bed load transport relation was formed for each site by plotting individual values of the dimensionless transport rate W* versus the reach‐average dimensionless shear stress τ*. The reference dimensionless shear stress τ*r was then estimated by selecting the value of τ* corresponding to a reference transport rate of W* = 0.002. The results indicate that the discharge corresponding to τ*r averages 67% of the bank‐full discharge, with the variation independent of reach‐scale morphologic and sediment properties. However, values of τ*r increase systematically with average channel gradient, ranging from 0.025–0.035 at sites with slopes of 0.001–0.006 to values greater than 0.10 at sites with slopes greater than 0.02. A corresponding relation for the bank‐full dimensionless shear stress τ*bf, formulated with data from 159 sites in North America and England, mirrors the relation between τ*r and channel gradient, suggesting that the bank‐full channel geometry of gravel‐ and cobble‐bedded streams is adjusted to a relatively constant excess shear stress, τ*bf − τ*r, across a wide range of slopes.

Prediction and verification of creep behavior in metallic materials and components, for the space shuttle thermal protection system. Volume 1, phase 1: Cyclic materials creep predictions

NASA Technical Reports Server (NTRS)

Davis, J. W.; Cramer, B. A.

1974-01-01

Cyclic creep response was investigated and design methods applicable to thermal protection system structures were developed. The steady-state (constant temperature and load) and cyclic creep response characteristics of four alloys were studied. Steady-state creep data were gathered through a literature survey to establish reference data bases. These data bases were used to develop empirical equations describing creep as a function of time, temperature, and stress and as a basis of comparison for test data. Steady-state creep tests and tensile cyclic tests were conducted. The following factors were investigated: material thickness and rolling direction; material cyclic creep response under varying loads and temperatures; constant stress and temperature cycles representing flight conditions; changing stresses present in a creeping beam as a result of stress redistribution; and complex stress and temperature profiles representative of space shuttle orbiter trajectories. A computer program was written, applying creep hardening theories and empirical equations for creep, to aid in analysis of test data. Results are considered applicable to a variety of structures which are cyclicly exposed to creep producing thermal environments.

Remote sensing of stress using electro-optics imaging technique

NASA Astrophysics Data System (ADS)

Chen, Tong; Yuen, Peter; Hong, Kan; Tsitiridis, Aristeidis; Kam, Firmin; Jackman, James; James, David; Richardson, Mark; Oxford, William; Piper, Jonathan; Thomas, Francis; Lightman, Stafford

2009-09-01

Emotional or physical stresses induce a surge of adrenaline in the blood stream under the command of the sympathetic nerve system, which, cannot be suppressed by training. The onset of this alleviated level of adrenaline triggers a number of physiological chain reactions in the body, such as dilation of pupil and an increased feed of blood to muscles etc. This paper reports for the first time how Electro-Optics (EO) technologies such as hyperspectral [1,2] and thermal imaging[3] methods can be used for the detection of stress remotely. Preliminary result using hyperspectral imaging technique has shown a positive identification of stress through an elevation of haemoglobin oxygenation saturation level in the facial region, and the effect is seen more prominently for the physical stressor than the emotional one. However, all results presented so far in this work have been interpreted together with the base line information as the reference point, and that really has limited the overall usefulness of the developing technology. The present result has highlighted this drawback and it prompts for the need of a quantitative assessment of the oxygenation saturation and to correlate it directly with the stress level as the top priority of the next stage of research.

Biosignal Analysis to Assess Mental Stress in Automatic Driving of Trucks: Palmar Perspiration and Masseter Electromyography

PubMed Central

Zheng, Rencheng; Yamabe, Shigeyuki; Nakano, Kimihiko; Suda, Yoshihiro

2015-01-01

Nowadays insight into human-machine interaction is a critical topic with the large-scale development of intelligent vehicles. Biosignal analysis can provide a deeper understanding of driver behaviors that may indicate rationally practical use of the automatic technology. Therefore, this study concentrates on biosignal analysis to quantitatively evaluate mental stress of drivers during automatic driving of trucks, with vehicles set at a closed gap distance apart to reduce air resistance to save energy consumption. By application of two wearable sensor systems, a continuous measurement was realized for palmar perspiration and masseter electromyography, and a biosignal processing method was proposed to assess mental stress levels. In a driving simulator experiment, ten participants completed automatic driving with 4, 8, and 12 m gap distances from the preceding vehicle, and manual driving with about 25 m gap distance as a reference. It was found that mental stress significantly increased when the gap distances decreased, and an abrupt increase in mental stress of drivers was also observed accompanying a sudden change of the gap distance during automatic driving, which corresponded to significantly higher ride discomfort according to subjective reports. PMID:25738768

Thermo-mechanical analysis of an internal cooling system with various configurations of a combustion liner after shell

NASA Astrophysics Data System (ADS)

Moon, Hokyu; Kim, Kyung Min; Park, Jun Su; Kim, Beom Seok; Cho, Hyung Hee

2015-12-01

The after-shell section, which is part of the gas turbine combustion liner, is exposed to the hottest combustion gas. Various cooling schemes have been applied to protect against severe thermal load. However, there is a significant discrepancy in the thermal expansion with large temperature differences, resulting in thermo-mechanical crack formation. In this study, to reduce combustion liner damage, thermo-mechanical analysis was conducted on three after-shell section configurations: inline-discrete divider wall, staggered divider wall, and swirler wall arrays. These array components are well-known heat-transfer enhancement structures in the duct. In the numerical analyses, the heat transfer characteristics, temperature and thermo-mechanical stress distribution were evaluated using finite volume method and finite element method commercial codes. As a result, we demonstrated that the temperature and the thermo-mechanical stress distribution were readily dependent on the structural array for cooling effectiveness and structural support in each modified cooling system. Compared with the reference model, the swirler wall array was most effective in diminishing the thermo-mechanical stress concentration, especially on the inner ring that is vulnerable to crack formation.

Selection and Validation of Appropriate Reference Genes for Quantitative Real-Time PCR Analysis of Gene Expression in Lycoris aurea

PubMed Central

Ma, Rui; Xu, Sheng; Zhao, Yucheng; Xia, Bing; Wang, Ren

2016-01-01

Lycoris aurea (L' Hér.) Herb, a perennial grass species, produces a unique variety of pharmacologically active Amaryllidaceae alkaloids. However, the key enzymes and their expression pattern involved in the biosynthesis of Amaryllidaceae alkaloids (especially for galanthamine) are far from being fully understood. Quantitative real-time polymerase chain reaction (qRT-PCR), a commonly used method for quantifying gene expression, requires stable reference genes to normalize its data. In this study, to choose the appropriate reference genes under different experimental conditions, 14 genes including YLS8 (mitosis protein YLS8), CYP2 (Cyclophilin 2), CYP 1 (Cyclophilin 1), TIP41 (TIP41-like protein), EXP2 (Expressed protein 2), PTBP1 (Polypyrimidine tract-binding protein 1), EXP1 (Expressed protein 1), PP2A (Serine/threonine-protein phosphatase 2A), β-TUB (β-tubulin), α-TUB (α-tubulin), EF1-α (Elongation factor 1-α), UBC (Ubiquitin-conjugating enzyme), ACT (Actin) and GAPDH (Glyceraldehyde 3-phosphate dehydrogenase) were selected from the transcriptome datasets of L. aurea. And then, expressions of these genes were assessed by qRT-PCR in various tissues and the roots under different treatments. The expression stability of the 14 candidates was analyzed by three commonly used software programs (geNorm, NormFinder, and BestKeeper), and their results were further integrated into a comprehensive ranking based on the geometric mean. The results show the relatively stable genes for each subset as follows: (1) EXP1 and TIP41 for all samples; (2) UBC and EXP1 for NaCl stress; (3) PTBP1 and EXP1 for heat stress, polyethylene glycol (PEG) stress and ABA treatment; (4) UBC and CYP2 for cold stress; (5) PTBP1 and PP2A for sodium nitroprusside (SNP) treatment; (6) CYP1 and TIP41 for methyl jasmonate (MeJA) treatment; and (7) EXP1 and TIP41 for various tissues. The reliability of these results was further enhanced through comparison between part qRT-PCR result and RNA sequencing (RNA-seq) data. In summary, our results identified appropriate reference genes for qRT-PCR in L. aurea, and will facilitate gene expression studies under these conditions. PMID:27200013

Characterization of reference genes for RT-qPCR in the desert moss Syntrichia caninervis in response to abiotic stress and desiccation/rehydration

PubMed Central

Li, Xiaoshuang; Zhang, Daoyuan; Li, Haiyan; Gao, Bei; Yang, Honglan; Zhang, Yuanming; Wood, Andrew J.

2015-01-01

Syntrichia caninervis is the dominant bryophyte of the biological soil crusts found in the Gurbantunggut desert. The extreme desert environment is characterized by prolonged drought, temperature extremes, high radiation and frequent cycles of hydration and dehydration. S. caninervis is an ideal organism for the identification and characterization of genes related to abiotic stress tolerance. Reverse transcription quantitative real-time polymerase chain reaction (RT-qPCR) expression analysis is a powerful analytical technique that requires the use of stable reference genes. Using available S. caninervis transcriptome data, we selected 15 candidate reference genes and analyzed their relative expression stabilities in S. caninervis gametophores exposed to a range of abiotic stresses or a hydration-desiccation-rehydration cycle. The programs geNorm, NormFinder, and RefFinder were used to assess and rank the expression stability of the 15 candidate genes. The stability ranking results of reference genes under each specific experimental condition showed high consistency using different algorithms. For abiotic stress treatments, the combination of two genes (α-TUB2 and CDPK) were sufficient for accurate normalization. For the hydration-desiccation-rehydration process, the combination of two genes (α-TUB1 and CDPK) were sufficient for accurate normalization. 18S was among the least stable genes in all of the experimental sets and was unsuitable as reference gene in S. caninervis. This is the first systematic investigation and comparison of reference gene selection for RT-qPCR work in S. caninervis. This research will facilitate gene expression studies in S. caninervis, related moss species from the Syntrichia complex and other mosses. PMID:25699066

Self-perceived stress reactivity is an indicator of psychosocial impairment at the workplace

PubMed Central

2010-01-01

Background Work related stress is associated with a range of debilitating health outcomes. However, no unanimously accepted assessment tool exists for the early identification of individuals suffering from chronic job stress. The psychological concept of self-perceived stress reactivity refers to the individual disposition of a person to answer stressors with immediate as well as long lasting stress reactions, and it could be a valid indicator of current as well as prospective adverse health outcomes. The aim of this study was to determine the extent to which perceived stress reactivity correlates with various parameters of psychosocial health, cardiovascular risk factors, and parameters of chronic stress and job stress in a sample of middle-aged industrial employees in a so-called "sandwich-position". Methods In this cross-sectional study, a total of 174 industrial employees were assessed for psychosocial and biological stress parameters. Differences between groups with high and low stress reactivity were analysed. Logistic regression models were applied to identify which parameters allow to predict perceived high versus low stress reactivity. Results In our sample various parameters of psychosocial stress like chronic stress and effort-reward imbalance were significantly increased in comparison to the normal population. Compared to employees with perceived low stress reactivity, those with perceived high stress reactivity showed poorer results in health-related complaints, depression, anxiety, sports behaviour, chronic stress, and effort-reward imbalance. The educational status of employees with perceived low stress reactivity is higher. Education, cardiovascular complaints, chronic stress, and effort-reward imbalance were moderate predictors for perceived stress reactivity. However, no relationship was found between stress reactivity and cardiovascular risk factors in our sample. Conclusions Job stress is a major burden in a relevant subgroup of industrial employees in a middle management position. Self-perceived stress reactivity seems to be an appropriate concept to identify employees who experience psychosocial stress and associated psychological problems at the workplace. PMID:20470413

Coping as a mediator of the relationship between stress mindset and psychological stress response: a pilot study

PubMed Central

Horiuchi, Satoshi; Tsuda, Akira; Aoki, Shuntaro; Yoneda, Kenichiro; Sawaguchi, Yusuke

2018-01-01

Background Coping, the cognitive and behavioral effort required to manage the effects of stressors, is important in determining psychological stress responses (ie, the emotional, behavioral, and cognitive responses to stressors). Coping was classified into categories of emotional expression (eg, negative feelings and thoughts), emotional support seeking (eg, approaching loved ones to request encouragement), cognitive reinterpretation (eg, reframing a problem positively), and problem solving (eg, working to solve the problem). Stress mindset refers to the belief that stress has enhancing (stress-is-enhancing mindset) or debilitating consequences (stress-is-debilitating mindset). This study examined whether coping mediated the relationship between stress mindset and psychological stress responses. Psychological stress responses were conceptualized as depression-anxiety, irritability-anger, and helplessness. The following two hypotheses were tested: 1) a stronger stress-is-enhancing mindset is associated with less frequent use of emotional expression, emotional support seeking, and problem solving, which in turn is associated with lower levels of depression-anxiety, irritability-anger, and helplessness; 2) a stronger stress-is-debilitating mindset is associated with more frequent use of these coping strategies, which in turn is associated with higher levels of these psychological stress responses. Materials and methods The participants were 30 male and 94 female undergraduate and graduate students (mean age =20.4 years). Stress mindset, coping, and psychological stress responses were measured using self-report questionnaires. Six mediation analyses were performed with stress-is-enhancing mindset or stress-is-debilitating mindset as the independent variable, one of the psychological stress responses as the dependent variable, and the four coping strategies as mediators. Results Emotional expression partially mediated the relationship between a strong stress-is-debilitating mindset and higher irritability-anger levels. The other three coping strategies did not exhibit mediating effects. None of the coping strategies mediated the relationship between a stress-is-enhancing mindset and psychological stress responses. Conclusion These results provide initial evidence that stress mindset is associated with psychological stress responses, through coping strategies. PMID:29535562

Are Stress and Coping Associated with Aptitude and Achievement Testing Performance among Children? A Preliminary Investigation.

ERIC Educational Resources Information Center

Plante, Thomas G.; And Others

1993-01-01

Examined association of stress and coping variables with aptitude and achievement testing among children (n=100) aged 6 to 16 referred for multidisciplinary diagnostic testing. Stress and coping were significantly associated with performance on aptitude and achievement tests. Specific stress of physical and/or sexual abuse as well as parental…

The Effect of Social Coping Resources and Growth-Fostering Relationships on Infertility Stress in Women.

ERIC Educational Resources Information Center

Gibson, Donna M.; Myers, Jane E.

2002-01-01

The experience of infertility often results in multiple stresses and needs for coping in these women. Study examines the relationship between the uses of social coping resources, growth-fostering relationships, and infertility stress. Results support the use of social coping resources for coping with infertility stress. (Contains 62 references and…

Meshless analysis of shear deformable shells: the linear model

NASA Astrophysics Data System (ADS)

Costa, Jorge C.; Tiago, Carlos M.; Pimenta, Paulo M.

2013-10-01

This work develops a kinematically linear shell model departing from a consistent nonlinear theory. The initial geometry is mapped from a flat reference configuration by a stress-free finite deformation, after which, the actual shell motion takes place. The model maintains the features of a complete stress-resultant theory with Reissner-Mindlin kinematics based on an inextensible director. A hybrid displacement variational formulation is presented, where the domain displacements and kinematic boundary reactions are independently approximated. The resort to a flat reference configuration allows the discretization using 2-D Multiple Fixed Least-Squares (MFLS) on the domain. The consistent definition of stress resultants and consequent plane stress assumption led to a neat formulation for the analysis of shells. The consistent linear approximation, combined with MFLS, made possible efficient computations with a desired continuity degree, leading to smooth results for the displacement, strain and stress fields, as shown by several numerical examples.

Stretching the Stress Boundary: Linking Air Pollution Health Effects to a Neurohormonal Stress Response

EPA Science Inventory

Inhaled pollutants produce effects in virtually all organ systems in our body and have been linked to chronic diseases including hypertension, atherosclerosis, Alzheimer’s and diabetes. A neurohormonal stress response (referred here as a systemic response produced by activation ...

Work-Related Stress Risk Assessment in Italy: A Methodological Proposal Adapted to Regulatory Guidelines

PubMed Central

Persechino, Benedetta; Valenti, Antonio; Ronchetti, Matteo; Rondinone, Bruna Maria; Di Tecco, Cristina; Vitali, Sara; Iavicoli, Sergio

2013-01-01

Background Work-related stress is one of the major causes of occupational ill health. In line with the regulatory framework on occupational health and safety (OSH), adequate models for assessing and managing risk need to be identified so as to minimize the impact of this stress not only on workers' health, but also on productivity. Methods After close analysis of the Italian and European reference regulatory framework and work-related stress assessment and management models used in some European countries, we adopted the UK Health and Safety Executive's (HSE) Management Standards (MS) approach, adapting it to the Italian context in order to provide a suitable methodological proposal for Italy. Results We have developed a work-related stress risk assessment strategy, meeting regulatory requirements, now available on a specific web platform that includes software, tutorials, and other tools to assist companies in their assessments. Conclusion This methodological proposal is new on the Italian work-related stress risk assessment scene. Besides providing an evaluation approach using scientifically validated instruments, it ensures the active participation of occupational health professionals in each company. The assessment tools provided enable companies not only to comply with the law, but also to contribute to a database for monitoring and assessment and give access to a reserved area for data analysis and comparisons. PMID:23961332

Process Modelling of Curing Process-Induced Internal Stress and Deformation of Composite Laminate Structure with Elastic and Viscoelastic Models

NASA Astrophysics Data System (ADS)

Li, Dongna; Li, Xudong; Dai, Jianfeng

2018-06-01

In this paper, two kinds of transient models, the viscoelastic model and the linear elastic model, are established to analyze the curing deformation of the thermosetting resin composites, and are calculated by COMSOL Multiphysics software. The two models consider the complicated coupling between physical and chemical changes during curing process of the composites and the time-variant characteristic of material performance parameters. Subsequently, the two proposed models are implemented respectively in a three-dimensional composite laminate structure, and a simple and convenient method of local coordinate system is used to calculate the development of residual stresses, curing shrinkage and curing deformation for the composite laminate. Researches show that the temperature, degree of curing (DOC) and residual stresses during curing process are consistent with the study in literature, so the curing shrinkage and curing deformation obtained on these basis have a certain referential value. Compared the differences between the two numerical results, it indicates that the residual stress and deformation calculated by the viscoelastic model are more close to the reference value than the linear elastic model.

Stability evaluation of reference genes for gene expression analysis by RT-qPCR in soybean under different conditions.

PubMed

Wan, Qiao; Chen, Shuilian; Shan, Zhihui; Yang, Zhonglu; Chen, Limiao; Zhang, Chanjuan; Yuan, Songli; Hao, Qinnan; Zhang, Xiaojuan; Qiu, Dezhen; Chen, Haifeng; Zhou, Xinan

2017-01-01

Real-time quantitative reverse transcription PCR is a sensitive and widely used technique to quantify gene expression. To achieve a reliable result, appropriate reference genes are highly required for normalization of transcripts in different samples. In this study, 9 previously published reference genes (60S, Fbox, ELF1A, ELF1B, ACT11, TUA5, UBC4, G6PD, CYP2) of soybean [Glycine max (L.) Merr.] were selected. The expression stability of the 9 genes was evaluated under conditions of biotic stress caused by infection with soybean mosaic virus, nitrogen stress, across different cultivars and developmental stages. ΔCt and geNorm algorithms were used to evaluate and rank the expression stability of the 9 reference genes. Results obtained from two algorithms showed high consistency. Moreover, results of pairwise variation showed that two reference genes were sufficient to normalize the expression levels of target genes under each experimental setting. For virus infection, ELF1A and ELF1B were the most stable reference genes for accurate normalization. For different developmental stages, Fbox and G6PD had the highest expression stability between two soybean cultivars (Tanlong No. 1 and Tanlong No. 2). ELF1B and ACT11 were identified as the most stably expressed reference genes both under nitrogen stress and among different cultivars. The results showed that none of the candidate reference genes were uniformly expressed at different conditions, and selecting appropriate reference genes was pivotal for gene expression studies with particular condition and tissue. The most stable combination of genes identified in this study will help to achieve more accurate and reliable results in a wide variety of samples in soybean.

Family Functioning and Children's Post-Traumatic Stress Symptoms in a Referred Sample Exposed to Interparental Violence.

PubMed

Telman, Machteld D; Overbeek, Mathilde M; de Schipper, J Clasien; Lamers-Winkelman, Francien; Finkenauer, Catrin; Schuengel, Carlo

This study examined the association between interparental violence (IPV), child abuse and neglect, other traumatic experiences, and children's post-traumatic stress (PTS) symptoms and explored the moderating role of family functioning in the aftermath of IPV. One hundred and twenty IPV-exposed children (53.3 % male, M age = 9.85) and parents who were referred to community mental health centers participated in the study. Combined, IPV, child abuse and neglect, and other traumatic experiences were associated with PTS symptoms. For family functioning, higher levels of parenting stress were associated with higher levels of PTS symptoms. No moderating effects were found. To understand the variability in PTS symptoms among children exposed to IPV, other traumatic and stressful experiences need to be taken into account.

Gambling scores for earthquake predictions and forecasts

NASA Astrophysics Data System (ADS)

Zhuang, Jiancang

2010-04-01

This paper presents a new method, namely the gambling score, for scoring the performance earthquake forecasts or predictions. Unlike most other scoring procedures that require a regular scheme of forecast and treat each earthquake equally, regardless their magnitude, this new scoring method compensates the risk that the forecaster has taken. Starting with a certain number of reputation points, once a forecaster makes a prediction or forecast, he is assumed to have betted some points of his reputation. The reference model, which plays the role of the house, determines how many reputation points the forecaster can gain if he succeeds, according to a fair rule, and also takes away the reputation points betted by the forecaster if he loses. This method is also extended to the continuous case of point process models, where the reputation points betted by the forecaster become a continuous mass on the space-time-magnitude range of interest. We also calculate the upper bound of the gambling score when the true model is a renewal process, the stress release model or the ETAS model and when the reference model is the Poisson model.

Free vibrations and buckling analysis of laminated plates by oscillatory radial basis functions

NASA Astrophysics Data System (ADS)

Neves, A. M. A.; Ferreira, A. J. M.

2015-12-01

In this paper the free vibrations and buckling analysis of laminated plates is performed using a global meshless method. A refined version of Kant's theorie which accounts for transverse normal stress and through-the-thickness deformation is used. The innovation is the use of oscillatory radial basis functions. Numerical examples are performed and results are presented and compared to available references. Such functions proved to be an alternative to the tradicional nonoscillatory radial basis functions.

Predictors of quality of life: A quantitative investigation of the stress-coping model in children with asthma

PubMed Central

Peeters, Yvette; Boersma, Sandra N; Koopman, Hendrik M

2008-01-01

Background Aim of this study is to further explore predictors of health related quality of life in children with asthma using factors derived from to the extended stress-coping model. While the stress-coping model has often been used as a frame of reference in studying health related quality of life in chronic illness, few have actually tested the model in children with asthma. Method In this survey study data were obtained by means of self-report questionnaires from seventy-eight children with asthma and their parents. Based on data derived from these questionnaires the constructs of the extended stress-coping model were assessed, using regression analysis and path analysis. Results The results of both regression analysis and path analysis reveal tentative support for the proposed relationships between predictors and health related quality of life in the stress-coping model. Moreover, as indicated in the stress-coping model, HRQoL is only directly predicted by coping. Both coping strategies 'emotional reaction' (significantly) and 'avoidance' are directly related to HRQoL. Conclusion In children with asthma, the extended stress-coping model appears to be a useful theoretical framework for understanding the impact of the illness on their quality of life. Consequently, the factors suggested by this model should be taken into account when designing optimal psychosocial-care interventions. PMID:18366753

Application of Finite Element Method of Numerical Modelling to Understand Toe Buckling Deformation in the Southern Alps of New Zealand.

NASA Astrophysics Data System (ADS)

Ridl, Romy; Bell, David; Villeneuve, Marlene

2017-04-01

Toe buckling deformation is a temporal product of induced stresses concentrated at the base of a slope. Prolonged induced stresses may lead to yielding of an anisotropic rock mass, either through rheological creep deformation (flexural toe buckling) or brittle failure (hinge buckling). Progressive deformation can lead to the breakout at the buckled toe and ultimately result in deep seated displacements on a mountain range scale, referred to as deep seated gravitational slope deformation (DSGSD). DSGSD can have a considerable impact on civil infrastructure and should be well understood for hazard identification, to inform civil engineering design and for resource management purposes. Toe buckling deformation was identified beneath the basal sliding zone of three large (≥50 Mm3) landslides in the Cromwell Gorge, New Zealand. This area was subjected to extensive geotechnical investigations for the Clyde Hydropower Scheme. During these investigations seventeen major landslides were identified in the Cromwell Gorge and subsequently stabilised. The data from the landslide stabilisation project, including 26.7 km of boreholes and 9 km of tunnels, for the three landslides exhibiting toe buckling was made available for this study. This comprehensive database has enabled comparison and validation of numerical simulations carried out for the Cromwell Gorge. The application of numerical modelling has demonstrated that toe buckling within the Cromwell Gorge is a result of the combination of induced stresses acting on an anisotropic schistose rock mass. The induced stresses comprise: i) topographically-induced gravitational stresses parallel to the slope, associated with the evolution of the Cromwell Gorge from a relatively low relief surface to present day topography (1400 m deep valley), and ii) active far-field tectonic stresses associated with the obliquely convergent stress regime of the Australian-Pacific continent plate boundary. Finite Element Method (FEM) numerical models were used to model the anisotropic nature of the schist rock mass, and a sequential unloading method was adopted to simulate valley evolution. Far-field tectonics were incorporated into the model by comparing topographically induced gravitational stresses with in situ field stress measurements. The results of sensitivity analyses demonstrate that the dominant parameters governing toe buckling deformation in the Cromwell Gorge are a function of the anisotropy of the schist (foliation orientation and stiffness), and the intersection of the two induced stress fields near the base of the slopes.

Self-assembly of silk fibroin under osmotic stress

NASA Astrophysics Data System (ADS)

Sohn, Sungkyun

The supramolecular self-assembly behavior of silk fibroin was investigated using osmotic stress technique. In Chapter 2, a ternary phase diagram of water-silk-LiBr was constructed based on X-ray results on the osmotically stressed regenerated silk fibroin of Bombyx mori silkworm. Microscopic data indicated that silk I is a hydrated structure and a rough estimate of the number of water molecules lost by the structure upon converting from silk I to silk II has been made, and found to be about 2.2 per [GAGAGS] hexapeptide. In Chapter 3, wet-spinning of osmotically stressed, regenerated silk fibroin was performed, based on the prediction that the enhanced control over structure and phase behavior using osmotic stress method helps improve the physical properties of wet-spun regenerated silk fibroin fibers. The osmotic stress was applied in order to pre-structure the regenerated silk fibroin molecule from its original random coil state to more oriented state, manipulating the phase of the silk solution in the phase diagram before the start of spinning. Monofilament fiber with a diameter of 20 microm was produced. In Chapter 4, we investigated if there is a noticeable synergistic osmotic pressure increase between co-existing polymeric osmolyte and salt when extremely highly concentrated salt molecules are present both at sample subphase and stressing subphase, as is the case of silk fibroin self-assembly. The equilibration method that measures osmotic pressure relative to a reference with known osmotic pressure was introduced. Osmotic pressure of aqueous LiBr solution up to 2.75M was measured and it was found that the synergistic effect was insignificant up to this salt concentration. Solution parameters of stressing solutions and Arrhenius kinetics based on time-temperature relationship for the equilibration process were derived as well. In Chapter 5, self-assembly behavior of natural silk fibroin within the gland of Bombyx mori silkworm was investigated using osmotic stress technique. Microscopic and thermodynamic details of this self-assembly process along the spinline have been assessed. Formation of a needle-shaped molecular lath under appropriate osmotic stress was found. Silk I degree of hydration of silk gland was quantitatively estimated by image analysis of optical micrographs and the numbers varied from 2.2 to 2.7 depending on the region in the gland. Osmotic pressure in the gland was also estimated by equilibration method.

Sublaminate analysis of interlaminar fracture in composites

NASA Technical Reports Server (NTRS)

Armanios, E. A.; Rehfield, L. W.

1986-01-01

A simple analysis method based upon a transverse shear deformation theory and a sublaminate approach is utilized to analyze a mixed-mode edge delamination specimen. The analysis provides closed form expressions for the interlaminar shear stresses ahead of the crack, the total energy release rate, and the energy release rate components. The parameters controlling the behavior are identified. The effect of specimen stacking sequence and delamination interface on the strain energy release rate components is investigated. Results are compared with a finite element simulation for reference. The simple nature of the method makes it suitable for preliminary design analyses which require a large number of configurations to be evaluated quickly and economically.

46 CFR 52.01-95 - Design (modifies PG-16 through PG-31 and PG-100).

Code of Federal Regulations, 2010 CFR

2010-10-01

... exceeding 525 °F. Refer to § 56.30-30(b)(1) of this subchapter for applicable requirements. (e) Stresses. (Modifies PG-22.) The stresses due to hydrostatic head shall be taken into account in determining the... stresses, imposed by effects other than internal pressure or static head, which increase the average stress...

46 CFR 52.01-95 - Design (modifies PG-16 through PG-31 and PG-100).

Code of Federal Regulations, 2012 CFR

2012-10-01

... exceeding 525 °F. Refer to § 56.30-30(b)(1) of this subchapter for applicable requirements. (e) Stresses. (Modifies PG-22.) The stresses due to hydrostatic head shall be taken into account in determining the... stresses, imposed by effects other than internal pressure or static head, which increase the average stress...

English Pronunciation: A Systematic Approach to Word-Stress and Vowel-Sounds.

ERIC Educational Resources Information Center

Carmona, Francisco

A handbook on English word stress and stressed-vowel sounds is based on the idea that these segments are, in most cases, controlled by phonological context and their pronunciation can be understood through a system of rules. It serves as a reference for teachers and as a text for students. Chapters address these topics: word stress and active and…

46 CFR 52.01-95 - Design (modifies PG-16 through PG-31 and PG-100).

Code of Federal Regulations, 2011 CFR

2011-10-01

... exceeding 525 °F. Refer to § 56.30-30(b)(1) of this subchapter for applicable requirements. (e) Stresses. (Modifies PG-22.) The stresses due to hydrostatic head shall be taken into account in determining the... stresses, imposed by effects other than internal pressure or static head, which increase the average stress...

Improved Stress Corrosion Cracking Resistance and Strength of a Two-Step Aged Al-Zn-Mg-Cu Alloy Using Taguchi Method

NASA Astrophysics Data System (ADS)

Lin, Lianghua; Liu, Zhiyi; Ying, Puyou; Liu, Meng

2015-12-01

Multi-step heat treatment effectively enhances the stress corrosion cracking (SCC) resistance but usually degrades the mechanical properties of Al-Zn-Mg-Cu alloys. With the aim to enhance SCC resistance as well as strength of Al-Zn-Mg-Cu alloys, we have optimized the process parameters during two-step aging of Al-6.1Zn-2.8Mg-1.9Cu alloy by Taguchi's L9 orthogonal array. In this work, analysis of variance (ANOVA) was performed to find out the significant heat treatment parameters. The slow strain rate testing combined with scanning electron microscope and transmission electron microscope was employed to study the SCC behaviors of Al-Zn-Mg-Cu alloy. Results showed that the contour map produced by ANOVA offered a reliable reference for selection of optimum heat treatment parameters. By using this method, a desired combination of mechanical performances and SCC resistance was obtained.

Evaluation of four inch diameter VGF-Ge substrates used for manufacturing multi-junction solar cell

NASA Astrophysics Data System (ADS)

Kewei, Cao; Tong, Liu; Jingming, Liu; Hui, Xie; Dongyan, Tao; Youwen, Zhao; Zhiyuan, Dong; Feng, Hui

2016-06-01

Low dislocation density Ge wafers grown by a vertical gradient freeze (VGF) method used for the fabrication of multi-junction photovoltaic cells (MJC) have been studied by a whole wafer scale measurement of the lattice parameter, X-ray rocking curves, etch pit density (EPD), impurities concentration, minority carrier lifetime and residual stress. Impurity content in the VGF-Ge wafers, including that of B, is quite low although B2O3 encapsulation is used in the growth process. An obvious difference exists across the whole wafer regarding the distribution of etch pit density, lattice parameter, full width at half maximum (FWHM) of the X-ray rocking curve and residual stress measured by Raman spectra. These are in contrast to a reference Ge substrate wafer grown by the Cz method. The influence of the VGF-Ge substrate on the performance of the MJC is analyzed and evaluated by a comparison of the statistical results of cell parameters. Project supported by the National Natural Science Foundation of China (No. 61474104).

NASALife-Component Fatigue and Creep Life Prediction Program and Illustrative Examples

NASA Technical Reports Server (NTRS)

Murthy, Pappu L. N.; Mital, Subodh K.; Gyekenyesi, John Z.

2005-01-01

NASALife is a life prediction program for propulsion system components made of ceramic matrix composites (CMC) under cyclic thermo-mechanical loading and creep rupture conditions. Although, the primary focus was for CMC components the underlying methodologies are equally applicable to other material systems as well. The program references data for low cycle fatigue (LCF), creep rupture, and static material properties as part of the life prediction process. Multiaxial stresses are accommodated by Von Mises based methods and a Walker model is used to address mean stress effects. Varying loads are reduced by the Rainflow counting method. Lastly, damage due to cyclic loading (Miner s rule) and creep are combined to determine the total damage per mission and the number of missions the component can survive before failure are calculated. Illustration of code usage is provided through example problem of a CMC turbine stator vane made of melt-infiltrated, silicon carbide fiber-reinforced, silicon carbide matrix composite (MI SiC/SiC)

Corticosterone stress response in tree swallows nesting near polychlorinated biphenyl- and dioxin-contaminated rivers

USGS Publications Warehouse

Franceschini, M.D.; Custer, Christine M.; Custer, T.W.; Reed, J.M.; Romero, L.M.

2008-01-01

We assayed baseline and stress-induced corticosterone concentrations from adult female and nestling tree swallows, Tachycineta bicolor, from New England, USA, sites with different levels of contamination with polychlorinated biphenyls (PCBs) and 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). Corticosterone was compared over 2 years from a highly contaminated PCB site along the Housatonic River (Berkshire County, MA, USA), a midrange contaminated site upstream, and a reference site. Adult females (n = 29), sampled only in 2003, showed an inverted-U association with PCBs, with higher stress-induced corticosterone with midrange contamination than at the high-contamination site. In nestlings, stress-induced corticosterone was highest for the highly contaminated site compared with the other sites in 2003 (n = 53, 29 nests), with no difference among sites in 2004 (n = 93, 27 nests). In 2004, we began testing mechanisms underlying these changes in nestlings at the high- and low-PCB sites. Corticosterone response to dexamethasone injection (used to test negative feedback) was not different between sites, but stress-induced corticosterone was reduced at the contaminated site after adrenocorticotropin hormone injection (used to test adrenal responsiveness), suggesting an inhibited ability to mount a stress response. We also compared nestlings from a stretch of the Woonasquatucket River, Rhode Island, USA, heavily contaminated with TCDD (n = 80, 43 nests) with nestlings from an upstream site that had lower levels of TCDD and the Berkshire County reference site. Although there were no stress-induced differences, baseline corticosterone was lower at the higher TCDD site than at the reference site. Altogether these findings suggest that tree swallows chronically exposed to high PCB and TCDD levels exhibit altered baseline and stress-induced corticosterone responses, but the patterns of alteration might not be predictable. ?? 2008 SETAC.

Nonlinear Finite Element Analysis of a General Composite Shell

DTIC Science & Technology

1988-12-01

strain I Poisson’s ratio ix I I iI I I 1 Total potential energy a Normal stress rShear stress Rotational terms Distance from midsurface e ,Y ,0 Rotations...respectively 0 0 Subscript "e" indicates element reference Subscript "g" indicates global reference Superscript "o" indicates midsurface values...surface strains and rotations are small, and displacements away from the midsurface are restricted by the Kirchhoff-Love hypotheses [3]. With these

An Account of Old English Stress.

ERIC Educational Resources Information Center

McCully, C. B.; Hogg, R. M.

1990-01-01

An analysis of stress patterns in Old English, from the perspective of a framework based on lexicalist metrical phonology, indicates that there was a central Old English stress rule that operated from left-to-right, in contrast to to the central rule for present day English. (46 references) (Author/CB)

A PERIPHERAL CHOLINERGIC PATHWAY MODULATES STRESS-INDUCED HYPERTHERMIA IN THE RAT EXPOSED TO AN OPEN FIELD.

EPA Science Inventory

Exposure to an open-field is psychologically stressful and leads to an elevation in core temperature (Tc). This increase in Tc associated with open-field is usually referred to as stress-induced hyperthermia (SIH) and can be blocked centrally with cyclooxygenase inhibitors suc...

Orchids in the Bathroom: Reflections on Relocation Stress.

ERIC Educational Resources Information Center

Powell, William R.

2001-01-01

Discusses the stress factors involved in moving overseas to teach, or in returning home after an overseas assignment. Includes warning signs of relocation stress, such as becoming fearful of new situations, being reluctant to talk about the move, and finding excessive fault with new people or places. (Contains 15 references.) (NB)

Preliminary investigation of the roles of military background and posttraumatic stress symptoms in frequency and recidivism of intimate partner violence perpetration among court-referred men.

PubMed

Hoyt, Tim; Wray, Alisha M; Rielage, Jennifer Klosterman

2014-04-01

Significant rates of intimate partner violence (IPV) perpetration have been identified among men with military backgrounds. Research indicates posttraumatic stress symptoms place military men at increased risk for IPV perpetration, but may be negatively associated with IPV among nonmilitary samples. However, no previous studies have directly compared court-referred IPV offenders with and without military experience, which may have clinical implications if posttraumatic stress symptoms are differentially associated with IPV perpetration across these two samples. Twenty court-referred IPV offenders with military background were demographically matched with 40 court-referred IPV offenders without military background. As anticipated, self- and partner-report of physically assaultive acts and injurious acts during baseline assessment showed significantly greater physical assault and injury perpetrated by offenders with military background. However, 1-year follow-up data on convictions indicated a significantly lower rate of recidivism among offenders with military background than among nonmilitary offenders. As hypothesized, symptoms of posttraumatic stress at intake showed a significant positive correlation with IPV perpetration among offenders with military background; however, this relationship showed a negative correlation among offenders without military background. Clinical implications are discussed including treatment avenues, such as Veterans Courts and other incarceration diversion programs, which may be particularly appropriate for offenders with military backgrounds.

Cubical Mass-Spring Model design based on a tensile deformation test and nonlinear material model.

PubMed

San-Vicente, Gaizka; Aguinaga, Iker; Tomás Celigüeta, Juan

2012-02-01

Mass-Spring Models (MSMs) are used to simulate the mechanical behavior of deformable bodies such as soft tissues in medical applications. Although they are fast to compute, they lack accuracy and their design remains still a great challenge. The major difficulties in building realistic MSMs lie on the spring stiffness estimation and the topology identification. In this work, the mechanical behavior of MSMs under tensile loads is analyzed before studying the spring stiffness estimation. In particular, the performed qualitative and quantitative analysis of the behavior of cubical MSMs shows that they have a nonlinear response similar to hyperelastic material models. According to this behavior, a new method for spring stiffness estimation valid for linear and nonlinear material models is proposed. This method adjusts the stress-strain and compressibility curves to a given reference behavior. The accuracy of the MSMs designed with this method is tested taking as reference some soft-tissue simulations based on nonlinear Finite Element Method (FEM). The obtained results show that MSMs can be designed to realistically model the behavior of hyperelastic materials such as soft tissues and can become an interesting alternative to other approaches such as nonlinear FEM.

Reynolds Stress Balance in Plane Wakes Subjected to Irrotational Strains

NASA Technical Reports Server (NTRS)

Rogers, Miichael M.; Merriam, Marshal (Technical Monitor)

1997-01-01

Direct numerical simulations of time-evolving turbulent plane wakes developing in the presence of various irrotational plane strains have been generated. A pseudospectral numerical method with up to 25 million modes is used to solve the equations in a reference frame moving with the irrotational strain. The initial condition for each simulation is taken from a previous turbulent self-similar plane wake direct numerical simulation at a velocity deficit Reynolds number, R(sub e), of about 2,000. All the terms in the equations governing the evolution of the Reynolds stresses have been calculated. The relative importance of the various terms is examined for the different strain geometries and the behavior of the individual terms is used to better assess whether the strained wakes are evolving self-similarly.

Lack of Effect of Sleep Apnea on Oxidative Stress in Obstructive Sleep Apnea Syndrome (OSAS) Patients

PubMed Central

Simiakakis, M.; Kapsimalis, F.; Chaligiannis, E.; Loukides, S.; Sitaras, N.; Alchanatis, M.

2012-01-01

Purpose The aim of this study was to evaluate markers of systemic oxidative stress and antioxidant capacity in subjects with and without OSAS in order to investigate the most important factors that determine the oxidant–antioxidant status. Methods A total of 66 subjects referred to our Sleep laboratory were examined by full polysomnography. Oxidative stress and antioxidant activity were assessed by measurement of the derivatives of reactive oxygen metabolites (d-ROMs) and the biological antioxidant capacity (BAP) in blood samples taken in the morning after the sleep study. Known risk factors for oxidative stress, such as age, sex, obesity, smoking, hypelipidemia, and hypertension, were investigated as possible confounding factors. Results 42 patients with OSAS (Apnea-Hypopnea index >15 events/hour) were compared with 24 controls (AHI<5). The levels of d-ROMS were significantly higher (p = 0.005) in the control group but the levels of antioxidant capacity were significantly lower (p = 0.004) in OSAS patients. The most important factors predicting the variance of oxidative stress were obesity, smoking habit, and sex. Parameters of sleep apnea severity were not associated with oxidative stress. Minimal oxygen desaturation and smoking habit were the most important predicting factors of BAP levels. Conclusion Obesity, smoking, and sex are the most important determinants of oxidative stress in OSAS subjects. Sleep apnea might enhance oxidative stress by the reduction of antioxidant capacity of blood due to nocturnal hypoxia. PMID:22761732

Normalization for Relative Quantification of mRNA and microRNA in Soybean Exposed to Various Abiotic Stresses

PubMed Central

Zhou, Yonggang; Chen, Huan; Dong, Yuanyuan; Wang, Nan; Li, Xiaowei; Jameel, Aysha; Yang, He; Zhang, Min; Chen, Kai; Wang, Fawei; Li, Haiyan

2016-01-01

Plant microRNAs are small non-coding, endogenic RNA molecule (containing 20–24 nucleotides) produced from miRNA precursors (pri-miRNA and pre-miRNA). Evidence suggests that up and down regulation of the miRNA targets the mRNA genes involved in resistance against biotic and abiotic stresses. Reverse transcription quantitative real-time polymerase chain reaction (RT-qPCR) is a powerful technique to analyze variations in mRNA levels. Normalizing the data using reference genes is essential for the analysis of reliable RT-qPCR data. In this study, two groups of candidate reference mRNAs and miRNAs in soybean leaves and roots treated with various abiotic stresses (PEG-simulated drought, salinity, alkalinity, salinity+alkalinity, and abscisic acid) were analyzed by RT-qPCR. We analyzed the most appropriate reference mRNA/miRNAs using the geNorm, NormFinder, and BestKeeper algorithms. According to the results, Act and EF1b were the most suitable reference mRNAs in leaf and root samples, for mRNA and miRNA precursor data normalization. The most suitable reference miRNAs found in leaf and root samples were 166a and 167a for mature miRNA data normalization. Hence the best combinations of reference mRNAs for mRNA and miRNA precursor data normalization were EF1a + Act or EF1b + Act in leaf samples, and EF1a + EF1b or 60s + EF1b in root samples. For mature miRNA data normalization, the most suitable combinations of reference miRNAs were 166a + 167d in leaf samples, and 171a + 156a or 167a + 171a in root samples. We identified potential reference mRNA/miRNAs for accurate RT-qPCR data normalization for mature miRNA, miRNA precursors, and their targeted mRNAs. Our results promote miRNA-based studies on soybean plants exposed to abiotic stress conditions. PMID:27176476

[Effort-Reward Imbalance and psychophysical health of teachers].

PubMed

Zurlo, Maria Clelia; Pes, Daniela

2012-01-01

The present study referred to the Effort-Reward Imbalance Model applied to the evaluation of teacher stress and, by means of the italian version of the ERI test, explored the connections between the dimensions of the model and the specific effects of occupational stress on teacher's psychophysical diseases and leaving intentions. METHODS. The: subjects were 476 teachers working in Campania (region in southern Italy), belonging to all levels of teaching, who completed a questionnaire containing measures of Effort-Reward Imbalance, psychophysical health and intention to leave the teaching profession. RESULTS. Results showed the relevant: perception, among teachers, of Effort-reward Imbalance and of different physical and psychological diseases. All the dimensions of the ERI model emerged to be significantly related, in the direction stated by the model, to the different forms of psychological and physical disease considered, highlighting specific influences on them. The ERI-test and model provide a useful measure and a significative interpretative frame to explore the dimensions of teacher's stress and to arrange interventions for the prevention of psychophysical diseases.

Stress within a Restricted Time Window Selectively Affects the Persistence of Long-Term Memory

PubMed Central

Fang, Qin; Chai, Ning; Zhao, Li-Yan; Xue, Yan-Xue; Luo, Yi-Xiao; Jian, Min; Han, Ying; Shi, Hai-Shui; Lu, Lin; Wu, Ping; Wang, Ji-Shi

2013-01-01

The effects of stress on emotional memory are distinct and depend on the stages of memory. Memory undergoes consolidation and reconsolidation after acquisition and retrieval, respectively. Stress facilitates the consolidation but disrupts the reconsolidation of emotional memory. Previous research on the effects of stress on memory have focused on long-term memory (LTM) formation (tested 24 h later), but the effects of stress on the persistence of LTM (tested at least 1 week later) are unclear. Recent findings indicated that the persistence of LTM requires late-phase protein synthesis in the dorsal hippocampus. The present study investigated the effect of stress (i.e., cold water stress) during the late phase after the acquisition and retrieval of contextual fear memory in rats. We found that stress and corticosterone administration during the late phase (12 h) after acquisition, referred to as late consolidation, selectively enhanced the persistence of LTM, whereas stress during the late phase (12 h) after retrieval, referred to as late reconsolidation, selectively disrupted the restabilized persistence of LTM. Moreover, the effects of stress on the persistence of LTM were blocked by the corticosterone synthesis inhibitor metyrapone, which was administered before stress, suggesting that the glucocorticoid system is involved in the effects of stress on the persistence of LTM. We conclude that stress within a restricted time window after acquisition or retrieval selectively affects the persistence of LTM and depends on the glucocorticoid system. PMID:23544051

Fusion of Three-Dimensional Echocardiographic Regional Myocardial Strain with Cardiac Computed Tomography for Noninvasive Evaluation of the Hemodynamic Impact of Coronary Stenosis in Patients with Chest Pain.

PubMed

Mor-Avi, Victor; Patel, Mita B; Maffessanti, Francesco; Singh, Amita; Medvedofsky, Diego; Zaidi, S Javed; Mediratta, Anuj; Narang, Akhil; Nazir, Noreen; Kachenoura, Nadjia; Lang, Roberto M; Patel, Amit R

2018-06-01

Combined evaluation of coronary stenosis and the extent of ischemia is essential in patients with chest pain. Intermediate-grade stenosis on computed tomographic coronary angiography (CTCA) frequently triggers downstream nuclear stress testing. Alternative approaches without stress and/or radiation may have important implications. Myocardial strain measured from echocardiographic images can be used to detect subclinical dysfunction. The authors recently tested the feasibility of fusion of three-dimensional (3D) echocardiography-derived regional resting longitudinal strain with coronary arteries from CTCA to determine the hemodynamic significance of stenosis. The aim of the present study was to validate this approach against accepted reference techniques. Seventy-eight patients with chest pain referred for CTCA who also underwent 3D echocardiography and regadenoson stress computed tomography were prospectively studied. Left ventricular longitudinal strain data (TomTec) were used to generate fused 3D displays and detect resting strain abnormalities (RSAs) in each coronary territory. Computed tomographic coronary angiographic images were interpreted for the presence and severity of stenosis. Fused 3D displays of subendocardial x-ray attenuation were created to detect stress perfusion defects (SPDs). In patients with stenosis >25% in at least one artery, fractional flow reserve was quantified (HeartFlow). RSA as a marker of significant stenosis was validated against two different combined references: stenosis >50% on CTCA and SPDs seen in the same territory (reference standard A) and fractional flow reserve < 0.80 and SPDs in the same territory (reference standard B). Of the 99 arteries with no stenosis >50% and no SPDs, considered as normal, 19 (19%) had RSAs. Conversely, with stenosis >50% and SPDs, RSAs were considerably more frequent (17 of 24 [71%]). The sensitivity, specificity, and accuracy of RSA were 0.71, 0.81, and 0.79, respectively, against reference standard A and 0.83, 0.81, and 0.82 against reference standard B. Fusion of CTCA and 3D echocardiography-derived resting myocardial strain provides combined displays, which may be useful in determination of the hemodynamic or functional impact of coronary abnormalities, without additional ionizing radiation or stress testing. Copyright © 2018 American Society of Echocardiography. Published by Elsevier Inc. All rights reserved.

A simple method for simulating wind profiles in the boundary layer of tropical cyclones

DOE PAGES

Bryan, George H.; Worsnop, Rochelle P.; Lundquist, Julie K.; ...

2016-11-01

A method to simulate characteristics of wind speed in the boundary layer of tropical cyclones in an idealized manner is developed and evaluated. The method can be used in a single-column modelling set-up with a planetary boundary-layer parametrization, or within large-eddy simulations (LES). The key step is to include terms in the horizontal velocity equations representing advection and centrifugal acceleration in tropical cyclones that occurs on scales larger than the domain size. Compared to other recently developed methods, which require two input parameters (a reference wind speed, and radius from the centre of a tropical cyclone) this new method alsomore » requires a third input parameter: the radial gradient of reference wind speed. With the new method, simulated wind profiles are similar to composite profiles from dropsonde observations; in contrast, a classic Ekman-type method tends to overpredict inflow-layer depth and magnitude, and two recently developed methods for tropical cyclone environments tend to overpredict near-surface wind speed. When used in LES, the new technique produces vertical profiles of total turbulent stress and estimated eddy viscosity that are similar to values determined from low-level aircraft flights in tropical cyclones. Lastly, temporal spectra from LES produce an inertial subrange for frequencies ≳0.1 Hz, but only when the horizontal grid spacing ≲20 m.« less

A Simple Method for Simulating Wind Profiles in the Boundary Layer of Tropical Cyclones

NASA Astrophysics Data System (ADS)

Bryan, George H.; Worsnop, Rochelle P.; Lundquist, Julie K.; Zhang, Jun A.

2017-03-01

A method to simulate characteristics of wind speed in the boundary layer of tropical cyclones in an idealized manner is developed and evaluated. The method can be used in a single-column modelling set-up with a planetary boundary-layer parametrization, or within large-eddy simulations (LES). The key step is to include terms in the horizontal velocity equations representing advection and centrifugal acceleration in tropical cyclones that occurs on scales larger than the domain size. Compared to other recently developed methods, which require two input parameters (a reference wind speed, and radius from the centre of a tropical cyclone) this new method also requires a third input parameter: the radial gradient of reference wind speed. With the new method, simulated wind profiles are similar to composite profiles from dropsonde observations; in contrast, a classic Ekman-type method tends to overpredict inflow-layer depth and magnitude, and two recently developed methods for tropical cyclone environments tend to overpredict near-surface wind speed. When used in LES, the new technique produces vertical profiles of total turbulent stress and estimated eddy viscosity that are similar to values determined from low-level aircraft flights in tropical cyclones. Temporal spectra from LES produce an inertial subrange for frequencies ≳ 0.1 Hz, but only when the horizontal grid spacing ≲ 20 m.

Proteomic analysis of Chromobacterium violaceum and its adaptability to stress.

PubMed

Castro, Diogo; Cordeiro, Isabelle Bezerra; Taquita, Paula; Eberlin, Marcos Nogueira; Garcia, Jerusa Simone; Souza, Gustavo Henrique M F; Arruda, Marco Aurélio Zezzi; Andrade, Edmar V; Filho, Spartaco A; Crainey, J Lee; Lozano, Luis Lopez; Nogueira, Paulo A; Orlandi, Patrícia P

2015-12-01

Chromobacterium violaceum (C. violaceum) occurs abundantly in a variety of ecosystems, including ecosystems that place the bacterium under stress. This study assessed the adaptability of C. violaceum by submitting it to nutritional and pH stresses and then analyzing protein expression using bi-dimensional electrophoresis (2-DE) and Maldi mass spectrometry. Chromobacterium violaceum grew best in pH neutral, nutrient-rich medium (reference conditions); however, the total protein mass recovered from stressed bacteria cultures was always higher than the total protein mass recovered from our reference culture. The diversity of proteins expressed (repressed by the number of identifiable 2-DE spots) was seen to be highest in the reference cultures, suggesting that stress reduces the overall range of proteins expressed by C. violaceum. Database comparisons allowed 43 of the 55 spots subjected to Maldi mass spectrometry to be characterized as containing a single identifiable protein. Stress-related expression changes were noted for C. violaceum proteins related to the previously characterized bacterial proteins: DnaK, GroEL-2, Rhs, EF-Tu, EF-P; MCP, homogentisate 1,2-dioxygenase, Arginine deiminase and the ATP synthase β-subunit protein as well as for the ribosomal protein subunits L1, L3, L5 and L6. The ability of C. violaceum to adapt its cellular mechanics to sub-optimal growth and protein production conditions was well illustrated by its regulation of ribosomal protein subunits. With the exception of the ribosomal subunit L3, which plays a role in protein folding and maybe therefore be more useful in stressful conditions, all the other ribosomal subunit proteins were seen to have reduced expression in stressed cultures. Curiously, C. violeaceum cultures were also observed to lose their violet color under stress, which suggests that the violacein pigment biosynthetic pathway is affected by stress. Analysis of the proteomic signatures of stressed C. violaceum indicates that nutrient-starvation and pH stress can cause changes in the expression of the C. violaceum receptors, transporters, and proteins involved with biosynthetic pathways, molecule recycling, energy production. Our findings complement the recent publication of the C. violeaceum genome sequence and could help with the future commercial exploitation of C. violeaceum.

Reference ranges for LVEF and LV volumes from electrocardiographically gated 82Rb cardiac PET/CT using commercially available software.

PubMed

Bravo, Paco E; Chien, David; Javadi, Mehrbod; Merrill, Jennifer; Bengel, Frank M

2010-06-01

Electrocardiographic gating is increasingly used for (82)Rb cardiac PET/CT, but reference ranges for global functional parameters are not well defined. We sought to establish reference values for left ventricular ejection fraction (LVEF), end systolic volume (ESV), and end diastolic volume (EDV) using 4 different commercial software packages. Additionally, we compared 2 different approaches for the definition of a healthy individual. Sixty-two subjects (mean age +/- SD, 49 +/- 9 y; 85% women; mean body mass index +/- SD, 34 +/- 10 kg/m(2)) who underwent (82)Rb-gated myocardial perfusion PET/CT were evaluated. All subjects had normal myocardial perfusion and no history of coronary artery disease (CAD) or cardiomyopathy. Subgroup 1 consisted of 34 individuals with low pretest probability of CAD (<10%), and subgroup 2 comprised 28 subjects who had no atherosclerosis on a coronary CT angiogram obtained concurrently during the PET/CT session. LVEF, ESV, and EDV were calculated at rest and during dipyridamole-induced stress, using CardIQ Physio (a dedicated PET software) and the 3 major SPECT software packages (Emory Cardiac Toolbox, Quantitative Gated SPECT, and 4DM-SPECT). Mean LVEF was significantly different among all 4 software packages. LVEF was most comparable between CardIQ Physio (62% +/- 6% and 54% +/- 7% at stress and rest, respectively) and 4DM-SPECT (64% +/- 7% and 56% +/- 8%, respectively), whereas Emory Cardiac Toolbox yielded higher values (71% +/- 6% and 65% +/- 6%, respectively, P < 0.001) and Quantitated Gated SPECT lower values (56% +/- 8% and 50% +/- 8%, respectively, P < 0.001). Subgroup 1 (low likelihood) demonstrated higher LVEF values than did subgroup 2 (normal CT angiography findings), using all software packages (P < 0.05). However, mean ESV and EDV at stress and rest were comparable between both subgroups (p = NS). Intra- and interobserver agreement were excellent for all methods. The reference range of LVEF and LV volumes from gated (82)Rb PET/CT varies significantly among available software programs and therefore cannot be used interchangeably. LVEF results were higher when healthy subjects were defined by a low pretest probability of CAD than by normal CT angiography results.

Leaf litter breakdown, microbial respiration and shredder production in metal-polluted streams

USGS Publications Warehouse

Carlisle, D.M.; Clements, W.H.

2005-01-01

1. If species disproportionately influence ecosystem functioning and also differ in their sensitivities to environmental conditions, the selective removal of species by anthropogenic stressors may lead to strong effects on ecosystem processes. We evaluated whether these circumstances held for several Colorado, U.S.A. streams stressed by Zn. 2. Benthic invertebrates and chemistry were sampled in five second-third order streams for 1 year. Study streams differed in dissolved metal concentrations, but were otherwise similar in chemical and physical characteristics. Secondary production of leaf-shredding insects was estimated using the increment summation and size-frequency methods. Leaf litter breakdown rates were estimated by retrieving litter-bags over a 171 day period. Microbial activity on leaf litter was measured in the laboratory using changes in oxygen concentration over a 48 h incubation period. 3. Dissolved Zn concentrations varied eightfold among two reference and three polluted streams. Total secondary production of shredders was negatively associated with metal contamination. Secondary production in reference streams was dominated by Taenionema pallidum. Results of previous studies and the current investigation demonstrate that this shredder is highly sensitive to metals in Colorado headwater streams. Leaf litter breakdown rates were similar between reference streams and declined significantly in the polluted streams. Microbial respiration at the most contaminated site was significantly lower than at reference sites. 4. Our results supported the hypothesis that some shredder species contribute disproportionately to leaf litter breakdown. Furthermore, the functionally dominant taxon was also the most sensitive to metal contamination. We conclude that leaf litter breakdown in our study streams lacked functional redundancy and was therefore highly sensitive to contaminant-induced alterations in community structure. We argue for the necessity of simultaneously measuring community structure and ecosystem function in anthropogenically stressed ecosystems.

Multicenter evaluation of stress-first myocardial perfusion image triage by nuclear technologists and automated quantification.

PubMed

Chaudhry, Waseem; Hussain, Nasir; Ahlberg, Alan W; Croft, Lori B; Fernandez, Antonio B; Parker, Mathew W; Swales, Heather H; Slomka, Piotr J; Henzlova, Milena J; Duvall, W Lane

2017-06-01

A stress-first myocardial perfusion imaging (MPI) protocol saves time, is cost effective, and decreases radiation exposure. A limitation of this protocol is the requirement for physician review of the stress images to determine the need for rest images. This hurdle could be eliminated if an experienced technologist and/or automated computer quantification could make this determination. Images from consecutive patients who were undergoing a stress-first MPI with attenuation correction at two tertiary care medical centers were prospectively reviewed independently by a technologist and cardiologist blinded to clinical and stress test data. Their decision on the need for rest imaging along with automated computer quantification of perfusion results was compared with the clinical reference standard of an assessment of perfusion images by a board-certified nuclear cardiologist that included clinical and stress test data. A total of 250 patients (mean age 61 years and 55% female) who underwent a stress-first MPI were studied. According to the clinical reference standard, 42 (16.8%) and 208 (83.2%) stress-first images were interpreted as "needing" and "not needing" rest images, respectively. The technologists correctly classified 229 (91.6%) stress-first images as either "needing" (n = 28) or "not needing" (n = 201) rest images. Their sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) were 66.7%, 96.6%, 80.0%, and 93.5%, respectively. An automated stress TPD score ≥1.2 was associated with optimal sensitivity and specificity and correctly classified 179 (71.6%) stress-first images as either "needing" (n = 31) or "not needing" (n = 148) rest images. Its sensitivity, specificity, PPV, and NPV were 73.8%, 71.2%, 34.1%, and 93.1%, respectively. In a model whereby the computer or technologist could correct for the other's incorrect classification, 242 (96.8%) stress-first images were correctly classified. The composite sensitivity, specificity, PPV, and NPV were 83.3%, 99.5%, 97.2%, and 96.7%, respectively. Technologists and automated quantification software had a high degree of agreement with the clinical reference standard for determining the need for rest images in a stress-first imaging protocol. Utilizing an experienced technologist and automated systems to screen stress-first images could expand the use of stress-first MPI to sites where the cardiologist is not immediately available for interpretation.

Improving stressful working lives: complementary therapies, counselling and clinical supervision for staff.

PubMed

Mackereth, Peter A; White, Keven; Cawthorn, Anne; Lynch, Barbara

2005-06-01

The aim of this paper is to briefly examine the contemporary phenomenon of "burnout" within oncology and palliative care. In discussing the suitable interventions to manage stress and avoid burnout, reference will be made to counselling and clinical supervision, but more substantially the paper will report on an innovative subsidised complementary therapy service for staff. The Government's Improving Working Lives Standard will be referred as an initiative that supports the development of supportive services for NHS staff.

Assessment of Stress and Burnout in Youth Librarians.

ERIC Educational Resources Information Center

Swanson, Cecilia P.

Stress and burnout are now recognized as serious problems in those fields generally referred to as the helping professions. Whatever the causes, stress and burnout impact on individuals and organizations. Librarianship has many aspects in common with other helping professions. Librarians serving youth face many of the same demands as do educators,…

Measuring Physiological Stress Responses in Children: Lessons from a Novice

ERIC Educational Resources Information Center

Quas, Jodi A.

2011-01-01

In this article the author describes challenges associated with integrating physiological measures of stress into developmental research, especially in the domains of memory and cognition. An initial critical challenge concerns how to define stress, which can refer to one or a series of events, a response, the consequence of that response, an…

Comparability analysis of protein therapeutics by bottom-up LC-MS with stable isotope-tagged reference standards

PubMed Central

Manuilov, Anton V; Radziejewski, Czeslaw H

2011-01-01

Comparability studies lie at the heart of assessments that evaluate differences amongst manufacturing processes and stability studies of protein therapeutics. Low resolution chromatographic and electrophoretic methods facilitate quantitation, but do not always yield detailed insight into the effect of the manufacturing change or environmental stress. Conversely, mass spectrometry (MS) can provide high resolution information on the molecule, but conventional methods are not very quantitative. This gap can be reconciled by use of a stable isotope-tagged reference standard (SITRS), a version of the analyte protein that is uniformly labeled with 13C6-arginine and 13C6-lysine. The SITRS serves as an internal control that is trypsin-digested and analyzed by liquid chromatography (LC)-MS with the analyte sample. The ratio of the ion intensities of each unlabeled and labeled peptide pair is then compared to that of other sample(s). A comparison of these ratios provides a readily accessible way to spot even minute differences among samples. In a study of a monoclonal antibody (mAb) spiked with varying amounts of the same antibody bearing point mutations, peptides containing the mutations were readily identified and quantified at concentrations as low as 2% relative to unmodified peptides. The method was robust, reproducible and produced a linear response for every peptide that was monitored. The method was also successfully used to distinguish between two batches of a mAb that were produced in two different cell lines while two batches produced from the same cell line were found to be highly comparable. Finally, the use of the SITRS method in the comparison of two stressed mAb samples enabled the identification of sites susceptible to deamidation and oxidation, as well as their quantitation. The experimental results indicate that use of a SITRS in a peptide mapping experiment with MS detection enables sensitive and quantitative comparability studies of proteins at high resolution. PMID:21654206

Comparability analysis of protein therapeutics by bottom-up LC-MS with stable isotope-tagged reference standards.

PubMed

Manuilov, Anton V; Radziejewski, Czeslaw H; Lee, David H

2011-01-01

Comparability studies lie at the heart of assessments that evaluate differences amongst manufacturing processes and stability studies of protein therapeutics. Low resolution chromatographic and electrophoretic methods facilitate quantitation, but do not always yield detailed insight into the effect of the manufacturing change or environmental stress. Conversely, mass spectrometry (MS) can provide high resolution information on the molecule, but conventional methods are not very quantitative. This gap can be reconciled by use of a stable isotope-tagged reference standard (SITRS), a version of the analyte protein that is uniformly labeled (13)C6-arginine and (13)C6-lysine. The SITRS serves as an internal control that is trypsin-digested and analyzed by liquid chromatography (LC)-MS with the analyte sample. The ratio of the ion intensities of each unlabeled and labeled peptide pair is then compared to that of other sample(s). A comparison of these ratios provides a readily accessible way to spot even minute differences among samples. In a study of a monoclonal antibody (mAb) spiked with varying amounts of the same antibody bearing point mutations, peptides containing the mutations were readily identified and quantified at concentrations as low as 2% relative to unmodified peptides. The method is robust, reproducible and produced a linear response for every peptide that was monitored. The method was also successfully used to distinguish between two batches of a mAb that were produced in two different cell lines while two batches produced from the same cell line were found to be highly comparable. Finally, the use of the SITRS method in the comparison of two stressed mAb samples enabled the identification of sites susceptible to deamidation and oxidation, as well as their quantitation. The experimental results indicate that use of a SITRS in a peptide mapping experiment with MS detection enables sensitive and quantitative comparability studies of proteins at high resolution.

Mediation of the Relationship between Maternal Phthalate Exposure and Preterm Birth by Oxidative Stress with Repeated Measurements across Pregnancy.

PubMed

Ferguson, Kelly K; Chen, Yin-Hsiu; VanderWeele, Tyler J; McElrath, Thomas F; Meeker, John D; Mukherjee, Bhramar

2017-03-01

Mediation analysis is useful for understanding mechanisms and has been used minimally in the study of the environment and disease. We examined mediation of the association between phthalate exposure during pregnancy and preterm birth by oxidative stress. This nested case-control study of preterm birth ( n = 130 cases, 352 controls) included women who delivered in Boston, Massachusestts, from 2006 through 2008. Phthalate metabolites and 8-isoprostane, an oxidative stress biomarker, were measured in urine from three visits in pregnancy. We applied four counterfactual mediation methods: method 1, utilizing exposure and mediator averages; method 2, using averages but allowing for an exposure-mediator interaction; method 3, incorporating longitudinal measurements of the exposure and mediator; and method 4, using longitudinal measurements and allowing for an exposure-mediator interaction. We observed mediation of the associations between phthalate metabolites and all preterm birth by 8-isoprostane, with the greatest estimated proportion mediated observed for spontaneous preterm births specifically. Fully utilizing repeated measures of the exposure and mediator improved precision of indirect (i.e., mediated) effect estimates, and including an exposure-mediator interaction increased the estimated proportion mediated. For example, for mono(2-ethyl-carboxy-propyl) phthalate (MECPP), a metabolite of di(2-ethylhexyl) phthalate (DEHP), the percent of the total effect mediated by 8-isoprostane increased from 47% to 60% with inclusion of an exposure-mediator interaction term, in reference to a total adjusted odds ratio of 1.67 or 1.48, respectively. This demonstrates mediation of the phthalate-preterm birth relationship by oxidative stress, and the utility of complex regression models in capturing mediated associations when repeated measures of exposure and mediator are available and an exposure-mediator interaction may exist. Citation: Ferguson KK, Chen YH, VanderWeele TJ, McElrath TF, Meeker JD, Mukherjee B. 2017. Mediation of the relationship between maternal phthalate exposure and preterm birth by oxidative stress with repeated measurements across pregnancy. Environ Health Perspect 125:488-494; http://dx.doi.org/10.1289/EHP282.

Genetics Home Reference: catecholaminergic polymorphic ventricular tachycardia

MedlinePlus

... rate increases in response to physical activity or emotional stress, it can trigger an abnormally fast and irregular ... handling of calcium within myocytes. During exercise or emotional stress, impaired calcium regulation in the heart can lead ...

Single-step scanner-based digital image correlation (SB-DIC) method for large deformation mapping in rubber

NASA Astrophysics Data System (ADS)

Goh, C. P.; Ismail, H.; Yen, K. S.; Ratnam, M. M.

2017-01-01

The incremental digital image correlation (DIC) method has been applied in the past to determine strain in large deformation materials like rubber. This method is, however, prone to cumulative errors since the total displacement is determined by combining the displacements in numerous stages of the deformation. In this work, a method of mapping large strains in rubber using DIC in a single-step without the need for a series of deformation images is proposed. The reference subsets were deformed using deformation factors obtained from the fitted mean stress-axial stretch ratio curve obtained experimentally and the theoretical Poisson function. The deformed reference subsets were then correlated with the deformed image after loading. The recently developed scanner-based digital image correlation (SB-DIC) method was applied on dumbbell rubber specimens to obtain the in-plane displacement fields up to 350% axial strain. Comparison of the mean axial strains determined from the single-step SB-DIC method with those from the incremental SB-DIC method showed an average difference of 4.7%. Two rectangular rubber specimens containing circular and square holes were deformed and analysed using the proposed method. The resultant strain maps from the single-step SB-DIC method were compared with the results of finite element modeling (FEM). The comparison shows that the proposed single-step SB-DIC method can be used to map the strain distribution accurately in large deformation materials like rubber at much shorter time compared to the incremental DIC method.

Trends in referral patterns, invasive management, and mortality in elderly patients referred for exercise stress testing.

PubMed

Bouzas-Mosquera, Alberto; Peteiro, Jesús; Broullón, Francisco J; Calviño-Santos, Ramón; Mosquera, Víctor X; Barbeito-Caamaño, Cayetana; Larrañaga-Moreira, José María; Maneiro-Melón, Nicolás; Álvarez-García, Nemesio; Vázquez-Rodríguez, José Manuel

2015-12-01

Scarce data are available on the temporal patterns in clinical characteristics and outcomes of elderly patients referred for exercise stress testing. We aimed to assess the trends in baseline characteristics, tests results, referrals for invasive management, and mortality in these patients. We evaluated 11,192 patients aged ≥65years who were referred for exercise stress testing between January 1998 and December 2013. Calendar years were grouped into four quadrennia (1998-2001, 2002-2005, 2006-2009, and 2010-2013), and trends in clinical characteristics of the patients, type and results of the tests, referrals for invasive management, and mortality across the different periods were assessed. Despite a progressive decrease in the proportion of patients with non-interpretable baseline electrocardiograms or prior history of coronary artery disease, there was a gradual and marked increase in the use of cardiac imaging from 32.8% in 1998-2001 to 67.6% in 2010-2013 (p<0.001). In addition, despite a gradual decline in the probability of positive exercise stress testing both without imaging (from 18.9 to 13.6%, p<0.001) and with imaging assessment (from 40.2 to 29.7%, p<0.001), the cumulative rate of coronary revascularization at 1year increased (from 10.8 to 13.7%, p<0.001). One-year mortality also decreased progressively from 3% to 1.6% (p<0.001). Among older adults referred for exercise stress testing, we observed a decline over time in the probability of inducible myocardial ischemia, an increase in the use of cardiac imaging and in the rate of coronary revascularization, and an improvement in the survival rate at 1year. Copyright © 2015 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.

Evaluation of New Reference Genes in Papaya for Accurate Transcript Normalization under Different Experimental Conditions

PubMed Central

Chen, Weixin; Chen, Jianye; Lu, Wangjin; Chen, Lei; Fu, Danwen

2012-01-01

Real-time reverse transcription PCR (RT-qPCR) is a preferred method for rapid and accurate quantification of gene expression studies. Appropriate application of RT-qPCR requires accurate normalization though the use of reference genes. As no single reference gene is universally suitable for all experiments, thus reference gene(s) validation under different experimental conditions is crucial for RT-qPCR analysis. To date, only a few studies on reference genes have been done in other plants but none in papaya. In the present work, we selected 21 candidate reference genes, and evaluated their expression stability in 246 papaya fruit samples using three algorithms, geNorm, NormFinder and RefFinder. The samples consisted of 13 sets collected under different experimental conditions, including various tissues, different storage temperatures, different cultivars, developmental stages, postharvest ripening, modified atmosphere packaging, 1-methylcyclopropene (1-MCP) treatment, hot water treatment, biotic stress and hormone treatment. Our results demonstrated that expression stability varied greatly between reference genes and that different suitable reference gene(s) or combination of reference genes for normalization should be validated according to the experimental conditions. In general, the internal reference genes EIF (Eukaryotic initiation factor 4A), TBP1 (TATA binding protein 1) and TBP2 (TATA binding protein 2) genes had a good performance under most experimental conditions, whereas the most widely present used reference genes, ACTIN (Actin 2), 18S rRNA (18S ribosomal RNA) and GAPDH (Glyceraldehyde-3-phosphate dehydrogenase) were not suitable in many experimental conditions. In addition, two commonly used programs, geNorm and Normfinder, were proved sufficient for the validation. This work provides the first systematic analysis for the selection of superior reference genes for accurate transcript normalization in papaya under different experimental conditions. PMID:22952972

Reactive sputter deposition of piezoelectric Sc 0.12Al 0.88N for contour mode resonators

DOE PAGES

Henry, Michael David; Young, Travis Ryan; Douglas, Erica Ann; ...

2018-05-11

Substitution of Al by Sc has been predicted and demonstrated to improve the piezoelectric response in AlN for commercial market applications in radio frequency filter technologies. Although cosputtering with multiple targets have achieved Sc incorporation in excess of 40%, industrial processes requiring stable single target sputtering are currently limited. A major concern with sputter deposition of ScAl is the control over the presence of non-c-axis oriented crystal growth, referred to as inclusions here, while simultaneously controlling film stress for suspended microelectromechanical systems (MEMS) structures. In this paper, we describe 12.5% ScAl single target reactive sputter deposition process and establishes amore » direct relationship between the inclusion occurrences and compressive film stress allowing for the suppression of the c-axis instability on silicon (100) and Ti/TiN/AlCu seeding layers. An initial high film stress, for suppressing inclusions, is then balanced with a lower film stress deposition to control total film stress to prevent Euler buckling of suspended MEMS devices. Contour mode resonators fabricated using these films demonstrate effective coupling coefficients up to 2.7% with figures of merit of 42. Finally, this work provides a method to establish inclusion free films in ScAlN piezoelectric films for good quality factor devices.« less

Reactive sputter deposition of piezoelectric Sc 0.12Al 0.88N for contour mode resonators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henry, Michael David; Young, Travis Ryan; Douglas, Erica Ann

Substitution of Al by Sc has been predicted and demonstrated to improve the piezoelectric response in AlN for commercial market applications in radio frequency filter technologies. Although cosputtering with multiple targets have achieved Sc incorporation in excess of 40%, industrial processes requiring stable single target sputtering are currently limited. A major concern with sputter deposition of ScAl is the control over the presence of non-c-axis oriented crystal growth, referred to as inclusions here, while simultaneously controlling film stress for suspended microelectromechanical systems (MEMS) structures. In this paper, we describe 12.5% ScAl single target reactive sputter deposition process and establishes amore » direct relationship between the inclusion occurrences and compressive film stress allowing for the suppression of the c-axis instability on silicon (100) and Ti/TiN/AlCu seeding layers. An initial high film stress, for suppressing inclusions, is then balanced with a lower film stress deposition to control total film stress to prevent Euler buckling of suspended MEMS devices. Contour mode resonators fabricated using these films demonstrate effective coupling coefficients up to 2.7% with figures of merit of 42. Finally, this work provides a method to establish inclusion free films in ScAlN piezoelectric films for good quality factor devices.« less

Reactive sputter deposition of piezoelectric Sc 0.12Al 0.88N for contour mode resonators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henry, Michael David; Young, Travis Ryan; Douglas, Erica Ann

Substitution of Al by Sc has been predicted and demonstrated to improve the piezoelectric response in AlN for commercial market applications in radio frequency filter technologies. Although cosputtering with multiple targets have achieved Sc incorporation in excess of 40%, industrial processes requiring stable single target sputtering are currently limited. A major concern with sputter deposition of ScAl is the control over the presence of non-c-axis oriented crystal growth, referred to as inclusions here, while simultaneously controlling film stress for suspended microelectromechanical systems (MEMS) structures. This work describes 12.5% ScAl single target reactive sputter deposition process and establishes a direct relationshipmore » between the inclusion occurrences and compressive film stress allowing for the suppression of the c-axis instability on silicon (100) and Ti/TiN/AlCu seeding layers. An initial high film stress, for suppressing inclusions, is then balanced with a lower film stress deposition to control total film stress to prevent Euler buckling of suspended MEMS devices. Contour mode resonators fabricated using these films demonstrate effective coupling coefficients up to 2.7% with figures of merit of 42. Furthermore, this work provides a method to establish inclusion free films in ScAlN piezoelectric films for good quality factor devices.« less

Approximate stresses in 2-D flat elastic contact fretting problems

NASA Astrophysics Data System (ADS)

Urban, Michael Rene

Fatigue results from the cyclic loading of a solid body. If the body subject to fatigue is in contact with another body and relative sliding motion occurs between these two bodies, then rubbing surface damage can accelerate fatigue failure. The acceleration of fatigue failure is especially important if the relative motion between the two bodies results in surface damage without excessive surface removal via wear. The situation just described is referred to as fretting fatigue. Understanding of fretting fatigue is greatly enhanced if the stress state associated with fretting can be characterized. For Hertzian contact, this can readily be done. Unfortunately, simple stress formulae are not available for flat body contact. The primary result of the present research is the development of a new, reasonably accurate, approximate closed form expression for 2-dimensional contact stresses which has been verified using finite element modeling. This expression is also combined with fracture mechanics to provide a simple method of determining when a crack is long enough to no longer be affected by the contact stress field. Lower bounds on fatigue life can then easily be calculated using fracture mechanics. This closed form expression can also be used to calculate crack propagation within the contact stress field. The problem of determining the cycles required to generate an initial crack and what to choose as an initial crack size is unresolved as it is in non-fretting fatigue.

Effect of the Yield Stress and r-value Distribution on the Earing Profile of Cup Drawing with Yld2000-2d Yield Function

NASA Astrophysics Data System (ADS)

Lou, Yanshan; Bae, Gihyun; Lee, Changsoo; Huh, Hoon

2010-06-01

This paper deals with the effect of the yield stress and r-value distribution on the earing in the cup drawing. The anisotropic yield function, Yld2000-2d yield function, is selected to describe the anisotropy of two metal sheets, 719B and AA5182-O. The tool dimension is referred from the Benchmark problem of NUMISHEET'2002. The Downhill Simplex method is applied to identify the anisotropic coefficients in Yld2000-2d yield function. Simulations of the drawing process are performed to investigate the earing profile of two materials. The earing profiles obtained from simulations are compared with the analytical model developed by Hosford and Caddell. Simulations are conducted with respect to the change of the yield stress and r-value distribution, respectively. The correlation between the anisotropy and the earing tendency is investigated based on simulation data. Finally, the earing mechanism is analyzed through the deformation process of the blank during the cup deep drawing. It can be concluded that ears locate at angular positions with lower yield stress and higher r-value while the valleys appear at the angular position with higher yield stress and lower r-value. The effect of the yield stress distribution is more important for the cup height distribution than that of the r-value distribution.

Heterogeneity among violence-exposed women: applying person-oriented research methods.

PubMed

Nurius, Paula S; Macy, Rebecca J

2008-03-01

Variability of experience and outcomes among violence-exposed people pose considerable challenges toward developing effective prevention and treatment protocols. To address these needs, the authors present an approach to research and a class of methodologies referred to as person oriented. Person-oriented tools support assessment of meaningful patterns among people that distinguish one group from another, subgroups for whom different interventions are indicated. The authors review the conceptual base of person-oriented methods, outline their distinction from more familiar variable-oriented methods, present descriptions of selected methods as well as empirical applications of person-oriented methods germane to violence exposure, and conclude with discussion of implications for future research and translation between research and practice. The authors focus on violence against women as a population, drawing on stress and coping theory as a theoretical framework. However, person-oriented methods hold utility for investigating diversity among violence-exposed people's experiences and needs across populations and theoretical foundations.

Cardiac stress testing for the diagnosis and management of coronary artery disease: a reference for the primary care physician.

PubMed

Gajulapalli, Rama Dilip; Aneja, Ashish; Rovner, Aleksandr

2012-02-01

Choosing the appropriate stress test is important in the workup of patients with possible myocardial ischemia. This choice often is challenging and sometimes confusing because of the plethora of tests and guidelines available. We present a broad overview of commonly available stress tests and indications to help physicians select the most appropriate stress test for their patients.

Does Chronic Unpredictable Stress during Adolescence Affect Spatial Cognition in Adulthood?

PubMed

Chaby, Lauren E; Sheriff, Michael J; Hirrlinger, Amy M; Lim, James; Fetherston, Thomas B; Braithwaite, Victoria A

2015-01-01

Spatial abilities allow animals to retain and cognitively manipulate information about their spatial environment and are dependent upon neural structures that mature during adolescence. Exposure to stress in adolescence is thought to disrupt neural maturation, possibly compromising cognitive processes later in life. We examined whether exposure to chronic unpredictable stress in adolescence affects spatial ability in late adulthood. We evaluated spatial learning, reference and working memory, as well as long-term retention of visuospatial cues using a radial arm water maze. We found that stress in adolescence decreased the rate of improvement in spatial learning in adulthood. However, we found no overall performance impairments in adult reference memory, working memory, or retention caused by adolescent-stress. Together, these findings suggest that adolescent-stress may alter the strategy used to solve spatial challenges, resulting in performance that is more consistent but is not refined by incorporating available spatial information. Interestingly, we also found that adolescent-stressed rats showed a shorter latency to begin the water maze task when re-exposed to the maze after an overnight delay compared with control rats. This suggests that adolescent exposure to reoccurring stressors may prepare animals for subsequent reoccurring challenges. Overall, our results show that stress in adolescence does not affect all cognitive processes, but may affect cognition in a context-dependent manner.

Does Chronic Unpredictable Stress during Adolescence Affect Spatial Cognition in Adulthood?

PubMed Central

Chaby, Lauren E.; Sheriff, Michael J.; Hirrlinger, Amy M.; Lim, James; Fetherston, Thomas B.; Braithwaite, Victoria A.

2015-01-01

Spatial abilities allow animals to retain and cognitively manipulate information about their spatial environment and are dependent upon neural structures that mature during adolescence. Exposure to stress in adolescence is thought to disrupt neural maturation, possibly compromising cognitive processes later in life. We examined whether exposure to chronic unpredictable stress in adolescence affects spatial ability in late adulthood. We evaluated spatial learning, reference and working memory, as well as long-term retention of visuospatial cues using a radial arm water maze. We found that stress in adolescence decreased the rate of improvement in spatial learning in adulthood. However, we found no overall performance impairments in adult reference memory, working memory, or retention caused by adolescent-stress. Together, these findings suggest that adolescent-stress may alter the strategy used to solve spatial challenges, resulting in performance that is more consistent but is not refined by incorporating available spatial information. Interestingly, we also found that adolescent-stressed rats showed a shorter latency to begin the water maze task when re-exposed to the maze after an overnight delay compared with control rats. This suggests that adolescent exposure to reoccurring stressors may prepare animals for subsequent reoccurring challenges. Overall, our results show that stress in adolescence does not affect all cognitive processes, but may affect cognition in a context-dependent manner. PMID:26580066

Nature-assisted rehabilitation for reactions to severe stress and/or depression in a rehabilitation garden: long-term follow-up including comparisons with a matched population-based reference cohort.

PubMed

Währborg, Peter; Petersson, Ingemar F; Grahn, Patrik

2014-03-01

To determine the effect of a nature-assisted rehabilitation programme in a group of patients with reactions to severe stress and/or mild to moderate depression. Changes in sick-leave status and healthcare consumption in these patients were compared with those in a matched population-based reference cohort (treatment as usual). Retrospective cohort study with a matched reference group from the general population. A total of 118 participants referred to a nature-assisted rehabilitation programme, and 678 controls recruited from the Skåne Health Care Register. For both groups, information on sick leave was extracted from the National Social Insurance Register and on healthcare consumption data from the Skåne Health Care Register. The interventional rehabilitation programme was designed as a multimodal programme involving professionals from horticulture and medicine. The programme was conducted in a rehabilitation garden, designed especially for this purpose. A significant reduction in healthcare consumption was noted among participants in the programme compared with the reference population. The main changes were a reduction in outpatient visits to primary healthcare and a reduction in inpatient psychiatric care. No significant difference in sick-leave status was found. A structured, nature-based rehabilitation programme for patients with reactions to severe stress and/or depression could be beneficial, as reflected in reduced healthcare consumption.

Sexual Self-concept and Its Relationship to Depression, Stress and Anxiety in Postmenopausal Women.

PubMed

Heidari, Mohammad; Ghodusi, Mansureh; Rafiei, Hossein

2017-04-01

Women in menopause have the more mood swings than before menopause. At the same time seem to sexual self-concept and sexual aspects of self-knowledge has a great impact on their mental health. This study aimed to investigate the sexual self-concept and its relationship to depression, stress and anxiety in postmenopausal women's. In this descriptive correlation research, 300 of postmenopausal women referred to healthcare and medical treatment centers in Abadeh city were selected by convenience sampling method. The information in this study was collected by using questionnaires of multidimensional sexual self-concept and depression anxiety stress scale 21 (DASS-21). For data analysis, SPSS/17 software was used. The results showed the mean score positive sexual self-concept was 41.03 ± 8.66 and the average score of negative sexual self in women's was 110.32 ± 43.05. As well as scores of depression, stress, and anxiety, 35.67%, 32.33% and 37.67% respectively were in severe level. Positive and negative sexual self-concept scores with scores of stress, anxiety, and depression, of post-menopausal women in the confidence of 0.01, is significantly correlated ( P < 0.05). Being stress, anxiety, and depression in severe level and also a significant correlation between increased stress, anxiety and depression with negative and weak self-concept of women's, it is necessary to devote more careful attention to mental health issues of women's and have appropriate interventions.

Effects of emotional and perceptual-motor stress on a voice recognition system's accuracy: An applied investigation

NASA Astrophysics Data System (ADS)

Poock, G. K.; Martin, B. J.

1984-02-01

This was an applied investigation examining the ability of a speech recognition system to recognize speakers' inputs when the speakers were under different stress levels. Subjects were asked to speak to a voice recognition system under three conditions: (1) normal office environment, (2) emotional stress, and (3) perceptual-motor stress. Results indicate a definite relationship between voice recognition system performance and the type of low stress reference patterns used to achieve recognition.

Risk of Spontaneous Preterm Birth in Relation to Maternal Depressive, Anxiety and Stress Symptoms

PubMed Central

Sanchez, Sixto E.; Puente, Gabriella C.; Atencio, Guillermo; Qiu, Chungfang; Yanez, David; Gelaye, Bizu; Williams, Michelle A.

2013-01-01

Objective To examine the risk of preterm birth (PTB) in relation to maternal psychiatric symptoms during pregnancy in Peruvian women. Methods This case control study included 479 PTB cases and 480 term controls. In-person interviews were conducted to assess women’s depressive, anxiety and stress symptoms using the Patient Health Questionnaire (PHQ-9) and the Depression Anxiety Stress Scales (DASS-21). Multivariable logistic regression procedures were used to estimate adjusted odds ratios (aOR) and 95% confidence intervals (CI). Results Compared with women reporting no or minimal depressive symptoms, the aOR (95% CI) for PTB associated with consecutive severity of depressive symptoms based on the PHQ-9 assessment method were as follows: mild 2.22 (95% CI 1.64–3.00) and moderate-severe 3.67 (95% CI 2.09–6.46). The corresponding aORs for mild, moderate, and moderate- severe depressive symptoms based on the DASS-21 assessment were, 1.00 (reference), 3.82 (95% CI 1.90–7.66) and 2.90 (95% CI 1.66–5.04), respectively. A positive gradient was observed for the odds of PTB with severity of anxiety (ptrend <0.001) and stress symptoms (ptrend <0.001). Conclusions The odds of PTB are increased in pregnant Peruvian women with psychiatric symptoms. Efforts to screen and treat affected women may modify risks of PTB and possibly other associated disorders. PMID:23447915

Form drag in rivers due to small-scale natural topographic features: 1. Regular sequences

USGS Publications Warehouse

Kean, J.W.; Smith, J.D.

2006-01-01

Small-scale topographic features are commonly found on the boundaries of natural rivers, streams, and floodplains. A simple method for determining the form drag on these features is presented, and the results of this model are compared to laboratory measurements. The roughness elements are modeled as Gaussian-shaped features defined in terms of three parameters: a protrusion height, H; a streamwise length scale, ??; and a spacing between crests, ??. This shape is shown to be a good approximation to a wide variety of natural topographic bank features. The form drag on an individual roughness element embedded in a series of identical elements is determined using the drag coefficient of the individual element and a reference velocity that includes the effects of roughness elements further upstream. In addition to calculating the drag on each element, the model determines the spatially averaged total stress, skin friction stress, and roughness height of the boundary. The effects of bank roughness on patterns of velocity and boundary shear stress are determined by combining the form drag model with a channel flow model. The combined model shows that drag on small-scale topographic features substantially alters the near-bank flow field. These methods can be used to improve predictions of flow resistance in rivers and to form the basis for fully predictive (no empirically adjusted parameters) channel flow models. They also provide a foundation for calculating the near-bank boundary shear stress fields necessary for determining rates of sediment transport and lateral erosion.

Justification of the estimation technique for the technical condition of the tank with inadmissible imperfections in the wall shape

NASA Astrophysics Data System (ADS)

Chepur, Petr; Tarasenko, Alexander; Gruchenkova, Alesya

2017-10-01

The paper has its focus on the problem of estimating the stress-strain state of the vertical steel tanks with the inadmissible geometric imperfections in the wall shape. In the paper, the authors refer to an actual tank to demonstrate that the use of certain design schemes can lead to the raw errors and, accordingly, to the unreliable results. Obviously, these design schemes cannot be based on when choosing the real repair technologies. For that reason, authors performed the calculations of the tank removed out of service for the repair, basing on the developed finite-element model of the VST-5000 tank with a conical roof. The proposed approach was developed for the analysis of the SSS (stress-strain state) of a tank having geometric imperfections of the wall shape. Based on the work results, the following was proposed: to amend the Annex A methodology “Method for calculating the stress-strain state of the tank wall during repair by lifting the tank and replacing the wall metal structures” by inserting the requirement to compulsory consider the actual stiffness of the VST entire structure and its roof when calculating the structure stress-strain state.

Impact of a Stress Management Intervention Program on Sexual Functioning and Stress Reduction in Women with Breast Cancer

PubMed Central

Shayan, Arezoo; Jamshidi, Farkhondeh; Tahmasebiboldaji, Vahid; Khani, Somayeh; Babaei, Maryam; Havasian, Mohamad Reza; Masoumi, Seyedeh Zahra

2017-01-01

Breast cancer as the most common cancer among women endangers various aspects of their sexual lives and is a major culprit regarding health impairment and low life quality. The aim of this study was to examine the effect of a stress management intervention program on sexual functioning and stress reduction in women with breast cancer. This study employed a quasi-experimental pre-test, post-test design which included follow-up checks and a control group. To this end, 104 women with breast cancer referring to Hamadan’s Mahdiyeh MRI Center at the time of data collection were conventionally selected in 2015. Using permuted blocks, they were randomly divided into experimental and control groups (n= 52), only the former receiving stress management counseling for 18 hours. Data were collected through a demographic questionnaire, the Female Sexual Function Index (FSFI) questionnaire, and Harry’s stress questionnaire, filled out by patients before and after the intervention. To analyze the data, descriptive statistics and two-way ANOVA were used. The results showed that cognitive - behavioral stress management group therapy improved total sexual functioning and its subscales. After the treatment, there was a significant difference in mean scores between the groups (p=0.01). Moreover, significant differences were observed in the mean scores for stress with improvement in the experimental group in post-test results. Cognitive - behavioral group therapy for stress management was thuis found to improve total sexual functioning and its subscales and reduce the level of stress in the experimental group after the intervention and follow-up period with an interval of two weeks. Therefore, this method can be used as a complementary therapy along with medical treatment in oncology centers. PMID:29072415

Diastolic time – frequency relation in the stress echo lab: filling timing and flow at different heart rates

PubMed Central

Bombardini, Tonino; Gemignani, Vincenzo; Bianchini, Elisabetta; Venneri, Lucia; Petersen, Christina; Pasanisi, Emilio; Pratali, Lorenza; Alonso-Rodriguez, David; Pianelli, Mascia; Faita, Francesco; Giannoni, Massimo; Arpesella, Giorgio; Picano, Eugenio

2008-01-01

A cutaneous force-frequency relation recording system based on first heart sound amplitude vibrations has been recently validated. Second heart sound can be simultaneously recorded in order to quantify both systole and diastole duration. Aims 1- To assess the feasibility and extra-value of operator-independent, force sensor-based, diastolic time recording during stress. Methods We enrolled 161 patients referred for stress echocardiography (exercise 115, dipyridamole 40, pacing 6 patients). The sensor was fastened in the precordial region by a standard ECG electrode. The acceleration signal was converted into digital and recorded together with ECG signal. Both systolic and diastolic times were acquired continuously during stress and were displayed by plotting times vs. heart rate. Diastolic filling rate was calculated as echo-measured mitral filling volume/sensor-monitored diastolic time. Results Diastolic time decreased during stress more markedly than systolic time. At peak stress 62 of the 161 pts showed reversal of the systolic/diastolic ratio with the duration of systole longer than diastole. In the exercise group, at 100 bpm HR, systolic/diastolic time ratio was lower in the 17 controls (0.74 ± 0.12) than in patients (0.86 ± 0.10, p < 0.05 vs. controls). Diastolic filling rate increased from 101 ± 36 (rest) to 219 ± 92 ml/m2* s-1 at peak stress (p < 0.5 vs. rest). Conclusion Cardiological systolic and diastolic duration can be monitored during stress by using an acceleration force sensor. Simultaneous calculation of stroke volume allows monitoring diastolic filling rate. Stress-induced "systolic-diastolic mismatch" can be easily quantified and is associated to several cardiac diseases, possibly expanding the spectrum of information obtainable during stress. PMID:18426559

Self-Report Data on the Interactive Nature of Stress in Canadian Elementary School Principals.

ERIC Educational Resources Information Center

McMurray, J. G.

Stress has been defined as a stimulus event, a complex personal response to the interaction of various personal and environmental factors. When a demand, real or imagined, is perceived, a stress response will occur unless appropriate coping responses are present. The terms burnout or excessive distress refer to the experience of physical,…

Does Stress-Related Growth Really Matter for Adolescents' Day-to-Day Adaptive Functioning?

ERIC Educational Resources Information Center

Mansfield, Cade D.; Diamond, Lisa M.

2017-01-01

Adolescent stress-related growth refers to enhancement in an adolescent's cognitive-affective or social resources as a result of experiencing stressors. We tested whether adolescents reporting high levels of stress-related growth showed superior adaptation outcomes on a day-to-day basis. Participants (n = 91; females = 46, age = 14) completed a…

Organizational Role Stress of Secondary School Teachers with Reference to Gender and Management

ERIC Educational Resources Information Center

Mohanty, Sankar Prasad

2017-01-01

Everyone talks on stress. Further, role stress in an organization is very common in the current scenario. The organization has its own structure and goal and an individual plays important role in order to achieve the organisational goals. Individual's unique personality and needs affects his role in any organization. The investigators conducted a…

BIMOS transistor solutions for ESD protection in FD-SOI UTBB CMOS technology

NASA Astrophysics Data System (ADS)

Galy, Philippe; Athanasiou, S.; Cristoloveanu, S.

2016-01-01

We evaluate the Electro-Static Discharge (ESD) protection capability of BIpolar MOS (BIMOS) transistors integrated in ultrathin silicon film for 28 nm Fully Depleted SOI (FD-SOI) Ultra Thin Body and BOX (UTBB) high-k metal gate technology. Using as a reference our measurements in hybrid bulk-SOI structures, we extend the BIMOS design towards the ultrathin silicon film. Detailed study and pragmatic evaluations are done based on 3D TCAD simulation with standard physical models using Average Current Slope (ACS) method and quasi-static DC stress (Average Voltage Slope AVS method). These preliminary 3D TACD results are very encouraging in terms of ESD protection efficiency in advanced FD-SOI CMOS.

Quantum sequencing: opportunities and challenges

NASA Astrophysics Data System (ADS)

di Ventra, Massimiliano

Personalized or precision medicine refers to the ability of tailoring drugs to the specific genome and transcriptome of each individual. It is however not yet feasible due the high costs and slow speed of present DNA sequencing methods. I will discuss a sequencing protocol that requires the measurement of the distributions of transverse tunneling currents during the translocation of single-stranded DNA into nanochannels. I will show that such a quantum sequencing approach can reach unprecedented speeds, without requiring any chemical preparation, amplification or labeling. I will discuss recent experiments that support these theoretical predictions, the advantages of this approach over other sequencing methods, and stress the challenges that need to be overcome to render it commercially viable.

A comparison the effects of reflexology and relaxation on the psychological symptoms in women with multiple sclerosis

PubMed Central

Soheili, Mozhgan; Nazari, Fatemeh; Shaygannejad, Vahid; Valiani, Mahboobeh

2017-01-01

Background: Multiple sclerosis (MS) occurs with a variety of physical and psychological symptoms, yet there is not a conclusive cure for this disease. Complementary medicine is a current treatment which seems is effective in relieving symptoms of patients with MS. Therefore, this study is aimed to determine and compare the effects of reflexology and relaxation on anxiety, stress, and depression in women with MS. Subjects and Methods: This study is a randomized clinical trial that is done on 75 women with MS referred to MS Clinic of Kashani Hospital. After simple non random sampling, participants were randomly assigned by minimization method to three groups: reflexology, relaxation and control (25 patients in each group). In the experimental groups were performed reflexology and relaxation interventions within 4 weeks, twice a week for 40 min and the control group were received only routine treatment as directed by a doctor. Data were collected through depression anxiety and stress scale questionnaire, before, immediately after and 2 months after interventions in all three groups. Chi-square, Kruskal–Wallis, repeated measures analysis of variance and one-way analysis of variance and least significant difference post hoc test via SPSS version 18 were used to analyze the data (P < 0.05) was considered as significant level. Results: The results showed a significant reduction in the severity of anxiety, stress and depression during the different times in the reflexology and relaxation groups as compared with the control group (P < 0.05). Conclusion: The results showed that reflexology and relaxation in relieving anxiety, stress and depression are effective in women with MS. Hence, these two methods, as effective techniques, can be recommended. PMID:28546976

Effect of platform switching on the peri-implant bone: A finite element study

PubMed Central

Martínez-González, Amparo; Peiró, Germán; Ródenas, Juan-José; López-Mollá, María-Victoria

2015-01-01

Background There exists a relation between the presence and location of the micro-gap and the loss of peri implant bone. Several authors have shown that the treatments based on the use of platform switching result in less peri-implant bone loss and an increased tissue stability. The purpose of this study was to analyse the effect of the platform switching on the distribution of stresses on the peri-implant bone using the finite element method. Material and Methods A realistic 3D full-mandible finite element model representing cortical bone and trabecular bone was used to study the distribution of the stress on the bone induced by an implant of diameter 4.1 mm. Two abutments were modelled. The first one, of diameter 4.1 mm, was used in the reference model to represent a conventional implant. The second one, of diameter 3.2 mm, was used to represent the implant with platform switching. Both models were subjected to axial and oblique masticatory loads. Results The analyses showed that, although no relevant differences can be found for the trabecular bone, the use of platform switching reduces the maximum stress level in the cortical bone by almost 36% with axial loads and by 40% with oblique loads. Conclusions The full 3D Finite Element model, that can be used to investigate the influence of other parameters (implant diameter, connexion type, …) on the biomechanical behaviour of the implant, showed that this stress reduction can be a biomechanical reasons to explain why the platform switching seems to reduce or eliminate crestal bone resorption after the prosthetic restoration. Key words:Dental implant, platform switching, finite element method. PMID:26535094

Calculation of load distribution in stiffened cylindrical shells

NASA Technical Reports Server (NTRS)

Ebner, H; Koller, H

1938-01-01

Thin-walled shells with strong longitudinal and transverse stiffening (for example, stressed-skin fuselages and wings) may, under certain simplifying assumptions, be treated as static systems with finite redundancies. In this report the underlying basis for this method of treatment of the problem is presented and a computation procedure for stiffened cylindrical shells with curved sheet panels indicated. A detailed discussion of the force distribution due to applied concentrated forces is given, and the discussion illustrated by numerical examples which refer to an experimentally determined circular cylindrical shell.

Selection and Validation of Reference Genes for qRT-PCR Expression Analysis of Candidate Genes Involved in Olfactory Communication in the Butterfly Bicyclus anynana

PubMed Central

Arun, Alok; Baumlé, Véronique; Amelot, Gaël; Nieberding, Caroline M.

2015-01-01

Real-time quantitative reverse transcription PCR (qRT-PCR) is a technique widely used to quantify the transcriptional expression level of candidate genes. qRT-PCR requires the selection of one or several suitable reference genes, whose expression profiles remain stable across conditions, to normalize the qRT-PCR expression profiles of candidate genes. Although several butterfly species (Lepidoptera) have become important models in molecular evolutionary ecology, so far no study aimed at identifying reference genes for accurate data normalization for any butterfly is available. The African bush brown butterfly Bicyclus anynana has drawn considerable attention owing to its suitability as a model for evolutionary ecology, and we here provide a maiden extensive study to identify suitable reference gene in this species. We monitored the expression profile of twelve reference genes: eEF-1α, FK506, UBQL40, RpS8, RpS18, HSP, GAPDH, VATPase, ACT3, TBP, eIF2 and G6PD. We tested the stability of their expression profiles in three different tissues (wings, brains, antennae), two developmental stages (pupal and adult) and two sexes (male and female), all of which were subjected to two food treatments (food stress and control feeding ad libitum). The expression stability and ranking of twelve reference genes was assessed using two algorithm-based methods, NormFinder and geNorm. Both methods identified RpS8 as the best suitable reference gene for expression data normalization. We also showed that the use of two reference genes is sufficient to effectively normalize the qRT-PCR data under varying tissues and experimental conditions that we used in B. anynana. Finally, we tested the effect of choosing reference genes with different stability on the normalization of the transcript abundance of a candidate gene involved in olfactory communication in B. anynana, the Fatty Acyl Reductase 2, and we confirmed that using an unstable reference gene can drastically alter the expression profile of the target candidate genes. PMID:25793735

Selection and validation of reference genes for qRT-PCR expression analysis of candidate genes involved in olfactory communication in the butterfly Bicyclus anynana.

PubMed

Arun, Alok; Baumlé, Véronique; Amelot, Gaël; Nieberding, Caroline M

2015-01-01

Real-time quantitative reverse transcription PCR (qRT-PCR) is a technique widely used to quantify the transcriptional expression level of candidate genes. qRT-PCR requires the selection of one or several suitable reference genes, whose expression profiles remain stable across conditions, to normalize the qRT-PCR expression profiles of candidate genes. Although several butterfly species (Lepidoptera) have become important models in molecular evolutionary ecology, so far no study aimed at identifying reference genes for accurate data normalization for any butterfly is available. The African bush brown butterfly Bicyclus anynana has drawn considerable attention owing to its suitability as a model for evolutionary ecology, and we here provide a maiden extensive study to identify suitable reference gene in this species. We monitored the expression profile of twelve reference genes: eEF-1α, FK506, UBQL40, RpS8, RpS18, HSP, GAPDH, VATPase, ACT3, TBP, eIF2 and G6PD. We tested the stability of their expression profiles in three different tissues (wings, brains, antennae), two developmental stages (pupal and adult) and two sexes (male and female), all of which were subjected to two food treatments (food stress and control feeding ad libitum). The expression stability and ranking of twelve reference genes was assessed using two algorithm-based methods, NormFinder and geNorm. Both methods identified RpS8 as the best suitable reference gene for expression data normalization. We also showed that the use of two reference genes is sufficient to effectively normalize the qRT-PCR data under varying tissues and experimental conditions that we used in B. anynana. Finally, we tested the effect of choosing reference genes with different stability on the normalization of the transcript abundance of a candidate gene involved in olfactory communication in B. anynana, the Fatty Acyl Reductase 2, and we confirmed that using an unstable reference gene can drastically alter the expression profile of the target candidate genes.

Identification of Reference Genes for Real-Time Quantitative PCR Experiments in the Liverwort Marchantia polymorpha

PubMed Central

Dolan, Liam; Langdale, Jane A.

2015-01-01

Real-time quantitative polymerase chain reaction (qPCR) has become widely used as a method to compare gene transcript levels across different conditions. However, selection of suitable reference genes to normalize qPCR data is required for accurate transcript level analysis. Recently, Marchantia polymorpha has been adopted as a model for the study of liverwort development and land plant evolution. Identification of appropriate reference genes has therefore become a necessity for gene expression studies. In this study, transcript levels of eleven candidate reference genes have been analyzed across a range of biological contexts that encompass abiotic stress, hormone treatment and different developmental stages. The consistency of transcript levels was assessed using both geNorm and NormFinder algorithms, and a consensus ranking of the different candidate genes was then obtained. MpAPT and MpACT showed relatively constant transcript levels across all conditions tested whereas the transcript levels of other candidate genes were clearly influenced by experimental conditions. By analyzing transcript levels of phosphate and nitrate starvation reporter genes, we confirmed that MpAPT and MpACT are suitable reference genes in M. polymorpha and also demonstrated that normalization with an inappropriate gene can lead to erroneous analysis of qPCR data. PMID:25798897

Toward the Reliability of Fault Representation Methods in Finite Difference Schemes for Simulation of Shear Rupture Propagation

NASA Astrophysics Data System (ADS)

Dalguer, L. A.; Day, S. M.

2006-12-01

Accuracy in finite difference (FD) solutions to spontaneous rupture problems is controlled principally by the scheme used to represent the fault discontinuity, and not by the grid geometry used to represent the continuum. We have numerically tested three fault representation methods, the Thick Fault (TF) proposed by Madariaga et al (1998), the Stress Glut (SG) described by Andrews (1999), and the Staggered-Grid Split-Node (SGSN) methods proposed by Dalguer and Day (2006), each implemented in a the fourth-order velocity-stress staggered-grid (VSSG) FD scheme. The TF and the SG methods approximate the discontinuity through inelastic increments to stress components ("inelastic-zone" schemes) at a set of stress grid points taken to lie on the fault plane. With this type of scheme, the fault surface is indistinguishable from an inelastic zone with a thickness given by a spatial step dx for the SG, and 2dx for the TF model. The SGSN method uses the traction-at-split-node (TSN) approach adapted to the VSSG FD. This method represents the fault discontinuity by explicitly incorporating discontinuity terms at velocity nodes in the grid, with interactions between the "split nodes" occurring exclusively through the tractions (frictional resistance) acting between them. These tractions in turn are controlled by the jump conditions and a friction law. Our 3D tests problem solutions show that the inelastic-zone TF and SG methods show much poorer performance than does the SGSN formulation. The SG inelastic-zone method achieved solutions that are qualitatively meaningful and quantitatively reliable to within a few percent. The TF inelastic-zone method did not achieve qualitatively agreement with the reference solutions to the 3D test problem, and proved to be sufficiently computationally inefficient that it was not feasible to explore convergence quantitatively. The SGSN method gives very accurate solutions, and is also very efficient. Reliable solution of the rupture time is reached with a median resolution of the cohesive zone of only ~2 grid points, and efficiency is competitive with the Boundary Integral (BI) method. The results presented here demonstrate that appropriate fault representation in a numerical scheme is crucial to reduce uncertainties in numerical simulations of earthquake source dynamics and ground motion, and therefore important to improving our understanding of earthquake physics in general.

Materials and techniques for model construction

NASA Technical Reports Server (NTRS)

Wigley, D. A.

1985-01-01

The problems confronting the designer of models for cryogenic wind tunnel models are discussed with particular reference to the difficulties in obtaining appropriate data on the mechanical and physical properties of candidate materials and their fabrication technologies. The relationship between strength and toughness of alloys is discussed in the context of maximizing both and avoiding the problem of dimensional and microstructural instability. All major classes of materials used in model construction are considered in some detail and in the Appendix selected numerical data is given for the most relevant materials. The stepped-specimen program to investigate stress-induced dimensional changes in alloys is discussed in detail together with interpretation of the initial results. The methods used to bond model components are considered with particular reference to the selection of filler alloys and temperature cycles to avoid microstructural degradation and loss of mechanical properties.

Use of the Thin-Walled Torsion Specimen

DTIC Science & Technology

1992-08-01

similar to the 316 stainless steel but the shear, stress shows a region of lower 16 strain hardening during the reversal. This behavor has been observed...oscillations and match the axial stress seen in experiment. Among these proposals are: the use of the Green -Naghdi stress rate,22 and the formulation of...other references on the topic. In this section, calculations using Jaumann, Green -Naghdi, and plastic spin motivated stress rates ap- plied to

Completed Beltrami-Michell Formulation in Polar Coordinates

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Hopkins, Dale A.

2005-01-01

A set of conditions had not been formulated on the boundary of an elastic continuum since the time of Saint-Venant. This limitation prevented the formulation of a direct stress calculation method in elasticity for a continuum with a displacement boundary condition. The missed condition, referred to as the boundary compatibility condition, is now formulated in polar coordinates. The augmentation of the new condition completes the Beltrami-Michell formulation in polar coordinates. The completed formulation that includes equilibrium equations and a compatibility condition in the field as well as the traction and boundary compatibility condition is derived from the stationary condition of the variational functional of the integrated force method. The new method is illustrated by solving an example of a mixed boundary value problem for mechanical as well as thermal loads.

All-Systolic Non-ECG-gated Myocardial Perfusion MRI: Feasibility of Multi-Slice Continuous First-Pass Imaging

PubMed Central

Sharif, Behzad; Arsanjani, Reza; Dharmakumar, Rohan; Bairey Merz, C. Noel; Berman, Daniel S.; Li, Debiao

2015-01-01

Purpose To develop and test the feasibility of a new method for non-ECG-gated first-pass perfusion (FPP) cardiac MR capable of imaging multiple short-axis slices at the same systolic cardiac phase. Methods A magnetization-driven pulse sequence was developed for non-ECG-gated FPP imaging without saturation-recovery preparation using continuous slice-interleaved radial sampling. The image reconstruction method, dubbed TRACE, employed self-gating based on reconstruction of a real-time image-based navigator combined with reference-constrained compressed sensing. Data from ischemic animal studies (n=5) was used in a simulation framework to evaluate temporal fidelity. Healthy subjects (n=5) were studied using both the proposed and conventional method to compare the myocardial contrast-to-noise ratio (CNR). Patients (n=2) underwent adenosine stress studies using the proposed method. Results Temporal fidelity of the developed method was shown to be sufficient at high heart-rates. The healthy volunteers studies demonstrated normal perfusion and no artifacts. Compared to the conventional scheme, myocardial CNR for the proposed method was slightly higher (8.6±0.6 vs. 8.0±0.7). Patient studies showed stress-induced perfusion defects consistent with invasive angiography. Conclusions The presented methods and results demonstrate feasibility of the proposed approach for high-resolution non-ECG-gated FPP imaging and indicate its potential for achieving desirable image quality (high CNR, no dark-rim artifacts) with a 3-slice spatial coverage, all imaged at the same systolic phase. PMID:26052843

Continuous Rapid Quantification of Stroke Volume using Magnetohydrodynamic Voltages in 3T MRI

PubMed Central

Gregory, T. Stan; Oshinski, John; Schmidt, Ehud J.; Kwong, Raymond Y.; Stevenson, William G.; Tse, Zion Tsz Ho

2015-01-01

Background To develop a technique to non-invasively estimate Stroke Volume (SV) in real-time during Magnetic Resonance Imaging (MRI) guided procedures, based on induced Magnetohydrodynamic Voltages (VMHD) that occur in Electrocardiogram (ECG) recordings during MRI exams, leaving the MRI scanner free to perform other imaging tasks. Due to the relationship between blood-flow (BF) and VMHD, we hypothesized that a method to obtain SV could be derived from extracted VMHD vectors in the Vectorcardiogram frame-of-reference (VMHDVCG). Methods and Results To estimate a subject-specific BF-VMHD model, VMHDVCG was acquired during a 20-second breath-hold and calibrated versus aortic BF measured using Phase Contrast Magnetic Resonance (PCMR) in 10 subjects (n=10) and one subject diagnosed with Premature Ventricular Contractions (PVCs). Beat-to-Beat validation of VMHDVCG derived BF was performed using Real-Time Phase Contrast (RTPC) imaging in 7 healthy subjects (n=7) during a 15 minute cardiac exercise stress tests and 30 minutes after stress relaxation in 3T MRIs. Subject-specific equations were derived to correlate VMHDVCG to BF at rest, and validated using RTPC. An average error of 7.22% and 3.69% in SV estimation, respectively, was found during peak stress, and after complete relaxation. Measured beat-to-beat blood flow time-history derived from RTPC and VMHD were highly correlated using a Spearman Rank Correlation Coefficient during stress tests (0.89) and after stress relaxation (=0.86). Conclusions Accurate beat-to-beat SV and BF were estimated using VMHDVCG extracted from intra-MRI 12-lead ECGs, providing a means to enhance patient monitoring during MR imaging and MR-guided interventions. PMID:26628581

The influence of personality traits and social support on male nursing student life stress: a cross-sectional research design.

PubMed

Lou, Jiunn-Horng; Chen, Sheng-Hwang; Yu, Hsing-Yi; Li, Ren-Hau; Yang, Cheng-I; Eng, Cheng-Joo

2010-06-01

Understanding how male nursing students alleviate life stress during their academic career is conducive to their development as successful nursing professionals. This study was designed to understand the personality traits, social support, and life stresses of male nursing students. The respective influences of personality traits and social support on life stress were also explored. The study used a cross-sectional research design. A college in central Taiwan was targeted as the site for data collection. A total of 158 questionnaires were dispatched, with 145 valid copies returned (valid response rate = 91.7%). Structured questionnaires were designed to collect data on participant demographics, personality traits, social support, and life stress. Statistical methods such as descriptive statistics, one-way analysis of variance, and multiple regression analysis were applied to data analysis. Major findings of this study revealed that (a) in general, the personality traits, social support, and life stress of male nursing students scored in the medium to high range. Participants reported encountering more stress from learning and life goals than from interpersonal stress. (b) Male nursing student demographic variables (e.g., parent [father and mother considered separately] education level) and the personality traits of conscientiousness and family support, respectively, were found to impact significantly on participant life stress perceptions. And (c) the only significant predictors of life stress were support from family and education level of participant fathers and mothers, accounting for about 23.7% of variability. It is suggested that nursing students in each year of their academic career should be exposed to courses geared to reduce the life stress perceptions (especially in the areas of learning and career development) of male nursing students. Increased family support is an effective way to decrease male nursing student life stress. This study could be a reference for the design and application of strategies to reduce the perceived life stress of male nursing students.

Determination of Job Stresses and Their Consequences in Drivers in Ilam

PubMed Central

Rahmani, Abdolrasoul; khodaei, Roghiyeh; Farjami, Atena; Mahmodkhani, Somayeh; Gharagozlou, Faramarz; Ahmadnezhad, Iman; Karchani, Mohsen; Vatani, Javad

2013-01-01

Background: Human factors cause 60–70 percent of automobile accidents. Everything related to people that is involved in and interacting with a system is considered to be a human factor. These factors can be psychological, biological, or social, and all of them can affect drivers’ behaviors. Therefore, one of the negative and unfavorable effects of these factors is that they cause accidents. According to previous research, increases in the job stresses result in increases in the incidence of car accidents. Drivers who feel stressed often do not to observe the rules, and they may not even notice the warning signs. By measuring the job stress among drivers and its adverse effects, this research aimed to provide an appropriate managerial solution to reduce these problems. Methods: The sample in this descriptive-analytical study consisted of 250 drivers who were selected and investigated. A job stress questionnaire was used as a means for collecting data. Health conditions were assessed by referring to clinical documents provided for the drivers. Accident data were included in the study using accident-related documentation. Two hundred and fifty drivers from Ilam, Iran participated and were analyzed in this study. This research is a cross-sectional study that was performed by dossiers and personal memoirs. Data were analyzed by SPSS16 and the chi-squared test. Results: The study showed that the main factors that cause medium- to high-level stress are the physical environment, workload and ambiguity of duties. It also showed that the incidence and severity of accidents increased as stress levels increased. Conclusion: This study shows high prevalence of job stress amongst drivers in Ilam. The main causes of the prevalence of stress among drivers in Ilam City are physical environment, workload and ambiguity of duties, responsibility. PMID:26120388

Computation of turbulent boundary layers employing the defect wall-function method. M.S. Thesis

NASA Technical Reports Server (NTRS)

Brown, Douglas L.

1994-01-01

In order to decrease overall computational time requirements of spatially-marching parabolized Navier-Stokes finite-difference computer code when applied to turbulent fluid flow, a wall-function methodology, originally proposed by R. Barnwell, was implemented. This numerical effort increases computational speed and calculates reasonably accurate wall shear stress spatial distributions and boundary-layer profiles. Since the wall shear stress is analytically determined from the wall-function model, the computational grid near the wall is not required to spatially resolve the laminar-viscous sublayer. Consequently, a substantially increased computational integration step size is achieved resulting in a considerable decrease in net computational time. This wall-function technique is demonstrated for adiabatic flat plate test cases from Mach 2 to Mach 8. These test cases are analytically verified employing: (1) Eckert reference method solutions, (2) experimental turbulent boundary-layer data of Mabey, and (3) finite-difference computational code solutions with fully resolved laminar-viscous sublayers. Additionally, results have been obtained for two pressure-gradient cases: (1) an adiabatic expansion corner and (2) an adiabatic compression corner.

The usage of image trigonometry in bone measurements.

PubMed

Dymond, Ian W; Ashforth, James A; Dymond, Graeme F; Spirakis, Thanos; Learmonth, Ian D

2013-01-01

The entire musculo-skeletal system responds dynamically to stresses and strains applied to it. Restoring normal biomechanics contributes to the normal function that ensures that physiological stresses and strains are preserved. Appropriate preoperative planning is mandatory to restore normal biomechanics at reconstructive surgery. Effective preoperative planning depends on the ability to reproducibly make accurate measurements of lengths and angles from plain radiographs. Measurement has become an integral part of orthopaedics to define morphological abnormality, to plan for reconstruction and for comparative research. The most prevalent method of measurement is usually based on lines drawn on radiographs with no accurate reference to the actual geometry of the structures. This two-dimensional projection of an asymmetrical three-dimensional structure leads to inaccuracy and consequently to a compromise in the overall precision of many procedures. In addition it is also difficult to monitor the progression of disease as the exact relationship of the bones and joints to each other, and to prosthetics, cannot be accurately recorded. This paper presents a method of digitally measuring relevant bone parameters in a geometric manner in order to achieve accurate, repeatable measurements.

[A boy with a painful knee: bone tumour or stress fracture?].

PubMed

Robben, Bart J; Jutte, Paul C

2012-01-01

The symptoms of a stress fracture are almost identical to those of most bone tumours. Even with the use of various imaging techniques, it can be difficult to establish the correct diagnosis. Although a primary bone tumour requires early treatment to improve its prognosis, the discriminative factor in the diagnosis of a stress fracture is its clinical development over time. A 10-year-old boy was referred to our outpatient clinic on the suspicion of a primary bone tumour in his right tibia. A case was once described in this journal in which a stress fracture had eventually led to an amputation. The suspicion of primary bone tumour often marks the start of a long and intense diagnostic course. A stress fracture is the major diagnostic pitfall when there is a suspicion of such a tumour. If doubts persist after a diagnostic work-up by imaging, consultation with the Bone Tumour Committee is indicated. The patient can also be quickly referred to a centre specialised in treating bone tumours, as was the case in this article.

Oxidative toxic stress in workers occupationally exposed to ceramic dust: A study in a ceramic manufacturing industry.

PubMed

Shad, Mehri Keshvari; Barkhordari, Abolfaz; Mehrparvar, Amir Houshang; Dehghani, Ali; Ranjbar, Akram; Moghadam, Rashid Heidari

2016-09-27

Exposure to compounds used in ceramic industries appears to be associated with induction of oxidative toxic stress. This cross sectional study was undertaken to assess the oxidative toxic stress parameters associated with occupational exposure to ceramic dust. Forty ceramic-exposed workers from a ceramic manufacturing industry and 40 unexposed referent subjects were studied. A questionnaire containing information regarding demographic variables, occupational history, history of any chronic disease, antioxidant consumption, and use of therapeutic drugs was administrated to them. Oxidative toxic stress biomarkers including lipid peroxidation (LPO), total antioxidant power (TAP), levels of total Thiol groups (TTG) and catalase (CAT) activity were measured. Significant increments in blood LPO levels, CAT activity and concomitant lower TAP were observed in ceramic exposed workers in comparison to referent group. No statistically significant difference was noted between the means of TTG levels between the groups. Findings of the study indicate that occupational exposure to ceramic dust induces oxidative toxic stress. Supplementation of workers with antioxidants may have beneficial effects on oxidative damages in ceramic industries.

On the role of constant-stress surfaces in the problem of minimizing elastic stress concentration

NASA Technical Reports Server (NTRS)

Wheeler, L.

1976-01-01

Cases involving antiplane shear deformation, axisymmetric torsion, and plane strain theory, with surfaces of constant stress magnitude optimal in terms of minimizing stress, are investigated. Results for the plane theory refer to exterior doubly connected domains. Stresses generated by torsion of an elastic solid lying within a radially convex region of revolution with plane ends, body force absent, and lateral surface traction-free, are examined. The unknown portion of the boundary of such domains may involve a hole, fillet, or notch.

Smartphone-Based Self-Assessment of Stress in Healthy Adult Individuals: A Systematic Review.

PubMed

Þórarinsdóttir, Helga; Kessing, Lars Vedel; Faurholt-Jepsen, Maria

2017-02-13

Stress is a common experience in today's society. Smartphone ownership is widespread, and smartphones can be used to monitor health and well-being. Smartphone-based self-assessment of stress can be done in naturalistic settings and may potentially reflect real-time stress level. The objectives of this systematic review were to evaluate (1) the use of smartphones to measure self-assessed stress in healthy adult individuals, (2) the validity of smartphone-based self-assessed stress compared with validated stress scales, and (3) the association between smartphone-based self-assessed stress and smartphone generated objective data. A systematic review of the scientific literature was reported and conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) statement. The scientific databases PubMed, PsycINFO, Embase, IEEE, and ACM were searched and supplemented by a hand search of reference lists. The databases were searched for original studies involving healthy individuals older than 18 years, measuring self-assessed stress using smartphones. A total of 35 published articles comprising 1464 individuals were included for review. According to the objectives, (1) study designs were heterogeneous, and smartphone-based self-assessed stress was measured using various methods (e.g., dichotomized questions on stress, yes or no; Likert scales on stress; and questionnaires); (2) the validity of smartphone-based self-assessed stress compared with validated stress scales was investigated in 3 studies, and of these, only 1 study found a moderate statistically significant positive correlation (r=.4; P<.05); and (3) in exploratory analyses, smartphone-based self-assessed stress was found to correlate with some of the reported smartphone generated objective data, including voice features and data on activity and phone usage. Smartphones are being used to measure self-assessed stress in different contexts. The evidence of the validity of smartphone-based self-assessed stress is limited and should be investigated further. Smartphone generated objective data can potentially be used to monitor, predict, and reduce stress levels. ©Helga Þórarinsdóttir, Lars Vedel Kessing, Maria Faurholt-Jepsen. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 13.02.2017.

Stress Analyzer

NASA Technical Reports Server (NTRS)

1990-01-01

SPATE 900 Dynamic Stress Analyzer is an acronym for Stress Pattern Analysis by Thermal Emission. It detects stress-induced temperature changes in a structure and indicates the degree of stress. Ometron, Inc.'s SPATE 9000 consists of a scan unit and a data display. The scan unit contains an infrared channel focused on the test structure to collect thermal radiation, and a visual channel used to set up the scan area and interrogate the stress display. Stress data is produced by detecting minute temperature changes, down to one-thousandth of a degree Centigrade, resulting from the application to the structure of dynamic loading. The electronic data processing system correlates the temperature changes with a reference signal to determine stress level.

Evaluation of Reference Genes for RT-qPCR Studies in the Seagrass Zostera muelleri Exposed to Light Limitation

PubMed Central

Schliep, M.; Pernice, M.; Sinutok, S.; Bryant, C. V.; York, P. H.; Rasheed, M. A.; Ralph, P. J.

2015-01-01

Seagrass meadows are threatened by coastal development and global change. In the face of these pressures, molecular techniques such as reverse transcription quantitative real-time PCR (RT-qPCR) have great potential to improve management of these ecosystems by allowing early detection of chronic stress. In RT-qPCR, the expression levels of target genes are estimated on the basis of reference genes, in order to control for RNA variations. Although determination of suitable reference genes is critical for RT-qPCR studies, reports on the evaluation of reference genes are still absent for the major Australian species Zostera muelleri subsp. capricorni (Z. muelleri). Here, we used three different software (geNorm, NormFinder and Bestkeeper) to evaluate ten widely used reference genes according to their expression stability in Z. muelleri exposed to light limitation. We then combined results from different software and used a consensus rank of four best reference genes to validate regulation in Photosystem I reaction center subunit IV B and Heat Stress Transcription factor A- gene expression in Z. muelleri under light limitation. This study provides the first comprehensive list of reference genes in Z. muelleri and demonstrates RT-qPCR as an effective tool to identify early responses to light limitation in seagrass. PMID:26592440

A Gaussian Approximation Potential for Silicon

NASA Astrophysics Data System (ADS)

Bernstein, Noam; Bartók, Albert; Kermode, James; Csányi, Gábor

We present an interatomic potential for silicon using the Gaussian Approximation Potential (GAP) approach, which uses the Gaussian process regression method to approximate the reference potential energy surface as a sum of atomic energies. Each atomic energy is approximated as a function of the local environment around the atom, which is described with the smooth overlap of atomic environments (SOAP) descriptor. The potential is fit to a database of energies, forces, and stresses calculated using density functional theory (DFT) on a wide range of configurations from zero and finite temperature simulations. These include crystalline phases, liquid, amorphous, and low coordination structures, and diamond-structure point defects, dislocations, surfaces, and cracks. We compare the results of the potential to DFT calculations, as well as to previously published models including Stillinger-Weber, Tersoff, modified embedded atom method (MEAM), and ReaxFF. We show that it is very accurate as compared to the DFT reference results for a wide range of properties, including low energy bulk phases, liquid structure, as well as point, line, and plane defects in the diamond structure.

Deformation measurements of composite multi-span beam shear specimens by Moire interferometry

NASA Technical Reports Server (NTRS)

Post, D.; Czarnek, R.; Joh, D.; Wood, J.

1984-01-01

Experimental analyses were performed for determination of in plane deformations and shear strains in unidirectional and quasi-isotropic graphite-epoxy beams. Forty-eight ply beams were subjected to 5 point and 3 point flexure. Whole field measurements were recorded at load levels from about 20% to more than 90% of failure loads. Contour maps of U and W displacement fields were obtained by moire interferometry, using reference gratings of 2400 lines/mm. Clearly defined fringes with fringe orders exceeding 1000 were obtained. Whole field contour maps of shear strains were obtained by a method developed for these tests. Various anomalous effects were detected in the displacement fields. Their analysis indicated excess shear strains in resin rich zones in regions of shear tractions; free edge shear strains in quasi-isotropic specimens in regions of normal stresses; and shear stresses associated with cyclic shear compliances of quasi-isotropic plies in regions of shear tractions. Their contributions could occur independently or in superposition. Qualitative analyses addressed questions of relaxation; influence of contact stress distribution; specimen failure; effect of specimen overhang; nonlinearity; and qualities of 5 and 3 point flexure tests.

Tensile strength of aluminium nitride films

NASA Astrophysics Data System (ADS)

Zong, Deng Gang; Ong, Chung Wo; Aravind, Manju; Tsang, Mei Po; Loong Choy, Chung; Lu, Deren; Ma, Dejun

2004-11-01

Two-layered aluminium nitride (AlN)/silicon nitride microbridges were fabricated for microbridge tests to evaluate the elastic modulus, residual stress and tensile strength of the AlN films. The silicon nitride layer was added to increase the robustness of the structure. In a microbridge test, load was applied to the centre of a microbridge and was gradually increased by a nano-indenter equipped with a wedge tip until the sample was broken, while displacement was recorded coherently. Measurements were performed on single-layered silicon nitride microbridges and two-layered AlN/silicon nitride microbridges respectively. The data were fitted to a theory to derive the elastic modulus, residual stress and tensile strength of the silicon nitride films and AlN films. For the AlN films, the three parameters were determined to be 200, 0.06 and 0.3 GPa, respectively. The values of elastic modulus obtained were consistent with those measured by conventional nano-indentation method. The tensile strength value can be used as a reference to reflect the maximum tolerable tensile stress of AlN films when they are used in micro-electromechanical devices.

Wall shear stress characterization of a 3D bluff-body separated flow

NASA Astrophysics Data System (ADS)

Fourrié, Grégoire; Keirsbulck, Laurent; Labraga, Larbi

2013-10-01

Efficient flow control strategies aimed at reducing the aerodynamic drag of road vehicles require a detailed knowledge of the reference flow. In this work, the flow around the rear slanted window of a generic car model was experimentally studied through wall shear stress measurements using an electrochemical method. The mean and fluctuating wall shear stress within the wall impact regions of the recirculation bubble and the main longitudinal vortex structures which develop above the rear window are presented. Correlations allow a more detailed characterization of the recirculation phenomenon within the separation bubble. In the model symmetry plane the recirculation structure compares well with simpler 2D configurations; specific lengths, flapping motion and shedding of large-scale vortices are observed, these similarities diminish when leaving the middle plane due to the strong three-dimensionality of the flow. A specific attention is paid to the convection processes occurring within the recirculation: a downstream convection velocity is observed, in accordance with 2D recirculations from the literature, and an upstream convection is highlighted along the entire bubble length which has not been underlined in some previous canonical configurations.

New concept for treating female stress urinary incontinence with radiofrequency.

PubMed

Lordelo, Patrícia; Vilas Boas, Andrea; Sodré, Danielle; Lemos, Amanda; Tozetto, Sibele; Brasil, Cristina

2017-01-01

To evaluate the clinical response and adverse effects of radiofrequency on the urethral meatus in the treatment of stress urinary incontinence in women. This phase one study included ten women with Stress Urinary Incontinence (SUI). The evaluation consisted of 1 hour Pad tests to quantify urine loss and to assess the degree of procedure satisfaction by using the Likert scale. To evaluate safety, we observed the number of referred side effects. Average age was 53.10 years±7.08 years. In assessing the final Pad Test, 70% showed a reduction and 30% a worsening of urinary loss. Using the Pad Test one month later, there was a reduction in all patients (p=0.028). The degree of satisfaction was 90% and no side effects have been observed. One patient reported burning sensation. The treatment of SUI with radiofrequency on the urethral meatus has no adverse effects, being a low risk method that reduces urinary loss in women. However, to increase the validity of the study, larger clinical trials are warranted. Copyright® by the International Brazilian Journal of Urology.

RNA-seq analysis of the head-kidney transcriptome response to handling-stress in the red cusk-eel (Genypterus chilensis).

PubMed

Aballai, Víctor; Aedo, Jorge E; Maldonado, Jonathan; Bastias-Molina, Macarena; Silva, Herman; Meneses, Claudio; Boltaña, Sebastian; Reyes, Ariel; Molina, Alfredo; Valdés, Juan Antonio

2017-12-01

Stress is a primary contributing factor of fish disease and mortality in aquaculture. We have previously reported that the red cusk-eel (Genypterus chilensis), an important farmed marine fish, demonstrates a handling-stress response that results in increased juvenile mortality, which is mainly associated with skeletal muscle atrophy and liver steatosis. To better understand the systemic effects of stress on red cusk-eel immune-related gene expression, the present study assessed the transcriptomic head-kidney response to handling-stress. The RNA sequencing generated a total of 61,655,525 paired-end reads from control and stressed conditions. De novo assembly using the CLC Genomic Workbench produced 86,840 transcripts and created a reference transcriptome with a N50 of 1426bp. Reads mapped onto the assembled reference transcriptome resulted in the identification of 569 up-regulated and 513 down-regulated transcripts. Gene ontology enrichment analysis revealed a significant up-regulation of the biological processes, like response to stress, response to biotic stimulus, and immune response. Conversely, a significant down-regulation of biological processes is associated with metabolic processes. These results were validated by RT-qPCR analysis for nine candidate genes involved in the immune response. The present data demonstrated that short term stress promotes the immune innate response in the marine teleost G. chilensis. This study is an important step towards understanding the immune adaptive response to stress in non-model teleost species. Copyright © 2017 Elsevier Inc. All rights reserved.

Are Bank Employees Stressed? Job Perception and Positivity in the Banking Sector: An Italian Observational Study.

PubMed

Mannocci, Alice; Marchini, Laura; Scognamiglio, Alfredo; Sinopoli, Alessandra; De Sio, Simone; Sernia, Sabina; La Torre, Giuseppe

2018-04-10

Background : The epidemiology of stress on bank workers in Europe is only at the introductory stages. This study investigated for the first time the association between occupational stress level in bank-employees using the BEST8, Karasek-Model and socio-demographic and working factors in Italy. Methods : The observational pilot study involved 384 employees. Three questionnaires were adopted to collect data: Karasek-Model, BEST8 ( p < 0.001) and Positivity-Scale. Results : 25% of the sample belonged to high stress group. The workers more stressed were older with a commercial role and consumer of antidepressants/sedatives. Women were much more likely to agree with the perception of feeling unsafe in a possible robbery (OR = 2.42; 95% CI: 1.50-3.91) and with that sales requests were in conflict with one's own personal moral code (OR = 2.31; 95% CI: 1.38-3.87). Older employees declared feeling inadequate in the workplace (OR = 1.97; 95% CI: 1.07-3.65) and younger employees referred to be anxious about meeting financial budget goals. Workers who had a low positivity had a lower probability of adaptation (OR = 0.88; 95% CI: 0.83-0.93). Conclusions : The occupational stress level in the banking sector involves many aspects: gender, type of bank, role, personal morals, high job-demands, low level of decision-making. This study recommended that banks should implement strategic interventions for well-being of employees, and consequently for their productivity.

[Methodological aspects of risk assessment of work related stress. Italian experience of R Karasek JCQ application, a multiphase approach].

PubMed

Ferrario, M M; Cesana, G

2009-01-01

Due to a new legislation, the assessment of work stress has become compulsory in Italy for all the enterprise. Work stress is become a leading health problem in work settings all over Europe. The two major approaches, the expert-based direct observations and the measurements of the perceived job strain, are briefly introduced emphasizing on strengthens and weaknesses. Among the methods to assess perceived job stress, the Karasek's Job Content Questionnaire has been extensively used in Italy, and the available results support its use because reliable and able to pick up major constrictiveness at work. In addition, because it is now possible to have reference levels, comparisons are possible for either public or private enterprises. Acknowledging the complexity of carrying out reliable assessment of work stress, a multiphase approach is emphasised: first an analysis or current data can be used to estimate the levels of turnover, down-sizing, outsourcing, extra hours, shift work, sickness absenteeism, changes of job titles, work accidents and work-related diseases. At a second step, on groups of workers selected because recognised at risk at the first phase and on control groups, the JCQ can be used to assess workers stress perception. Finally, when constrain conditions emerge,further investigations are required, including: intervention of experts in work organisation analysis, clinical psychological examinations of selected workers, to separate between work-related and personal psychological problems and health consequences.

Study of the comprehension of the scientific method by members of a university health research laboratory.

PubMed

Burlamaque-Neto, A C; Santos, G R; Lisbôa, L M; Goldim, J R; Machado, C L B; Matte, U; Giugliani, R

2012-02-01

In Brazil, scientific research is carried out mainly at universities, where professors coordinate research projects with the active participation of undergraduate and graduate students. However, there is no formal program for the teaching/learning of the scientific method. The objective of the present study was to evaluate the comprehension of the scientific method by students of health sciences who participate in scientific projects in an academic research laboratory. An observational descriptive cross-sectional study was conducted using Edgar Morin complexity as theoretical reference. In a semi-structured interview, students were asked to solve an abstract logical puzzle - TanGram. The collected data were analyzed using the hermeneutic-dialectic analysis method proposed by Minayo and discussed in terms of the theoretical reference of complexity. The students' concept of the scientific method is limited to participation in projects, stressing the execution of practical procedures as opposed to scientific thinking. The solving of the TanGram puzzle revealed that the students had difficulties in understanding questions and activities focused on subjects and their processes. Objective answers, even when dealing with personal issues, were also reflected on the students' opinions about the characteristics of a successful researcher. Students' difficulties concerning these issues may affect their scientific performance and result in poorly designed experiments. This is a preliminary study that should be extended to other centers of scientific research.

Study of the comprehension of the scientific method by members of a university health research laboratory

PubMed Central

Burlamaque-Neto, A.C.; Santos, G.R.; Lisbôa, L.M.; Goldim, J.R.; Machado, C.L.B.; Matte, U.; Giugliani, R.

2012-01-01

In Brazil, scientific research is carried out mainly at universities, where professors coordinate research projects with the active participation of undergraduate and graduate students. However, there is no formal program for the teaching/learning of the scientific method. The objective of the present study was to evaluate the comprehension of the scientific method by students of health sciences who participate in scientific projects in an academic research laboratory. An observational descriptive cross-sectional study was conducted using Edgar Morin complexity as theoretical reference. In a semi-structured interview, students were asked to solve an abstract logical puzzle - TanGram. The collected data were analyzed using the hermeneutic-dialectic analysis method proposed by Minayo and discussed in terms of the theoretical reference of complexity. The students' concept of the scientific method is limited to participation in projects, stressing the execution of practical procedures as opposed to scientific thinking. The solving of the TanGram puzzle revealed that the students had difficulties in understanding questions and activities focused on subjects and their processes. Objective answers, even when dealing with personal issues, were also reflected on the students' opinions about the characteristics of a successful researcher. Students' difficulties concerning these issues may affect their scientific performance and result in poorly designed experiments. This is a preliminary study that should be extended to other centers of scientific research. PMID:22249427

Stress management on underlying GaN-based epitaxial films: A new vision for achieving high-performance LEDs on Si substrates

NASA Astrophysics Data System (ADS)

Lin, Zhiting; Wang, Haiyan; Lin, Yunhao; Wang, Wenliang; Li, Guoqiang

2017-11-01

High-performance blue GaN-based light-emitting diodes (LEDs) on Si substrates have been achieved by applying a suitable tensile stress in the underlying n-GaN. It is demonstrated by simulation that tensile stress in the underlying n-GaN alleviates the negative effect from polarization electric fields on multiple quantum wells but an excessively large tensile stress severely bends the band profile of the electron blocking layer, resulting in carrier loss and large electric resistance. A medium level of tensile stress, which ranges from 4 to 5 GPa, can maximally improve the luminous intensity and decrease forward voltage of LEDs on Si substrates. The LED with the optimal tensile stress shows the largest simulated luminous intensity and the smallest simulated voltage at 35 A/cm2. Compared to the LEDs with a compressive stress of -3 GPa and a large tensile stress of 8 GPa, the improvement of luminous intensity can reach 102% and 28.34%, respectively. Subsequent experimental results provide evidence of the superiority of applying tensile stress in n-GaN. The experimental light output power of the LEDs with a tensile stress of 1.03 GPa is 528 mW, achieving a significant improvement of 19.4% at 35 A/cm2 in comparison to the reference LED with a compressive stress of -0.63 GPa. The forward voltage of this LED is 3.08 V, which is smaller than 3.11 V for the reference LED. This methodology of stress management on underlying GaN-based epitaxial films shows a bright feature for achieving high-performance LED devices on Si substrates.

Parenting Stress and Child Behavior Problems among Clinic-Referred Youth: Cross-Cultural Differences across the US and Korea

ERIC Educational Resources Information Center

Chung, Kyong-Mee; Ebesutani, Chad; Bang, Hye Min; Kim, Joohee; Chorpita, Bruce F.; Weisz, John R.; Suh, Dongsoo; Byun, Heejung

2013-01-01

Due to increased multiculturalism in the US and abroad, there is a need for increased understanding of the different ways in which parenting stress is related to child problems across cultures. In the present study, we investigated (a) differences in reported parenting stress and childhood problem behaviors across a Korean (n = 71) and US (n = 71)…

Examining Factor Structure and Validating the Persian Version of the Pregnancy's Worries and Stress Questionnaire for Pregnant Iranian Women.

PubMed

Navidpour, Fariba; Dolatian, Mahrokh; Yaghmaei, Farideh; Majd, Hamid Alavi; Hashemi, Seyed Saeed

2015-04-23

Pregnant women tend to experience anxiety and stress when faced with the changes to their biology, environment and personal relationships. The identification of these factors and the prevention of their side effects are vital for both mother and fetus. The present study was conducted to validate and to examine the factor structure of the Persian version of the Pregnancy's Worries and Stress Questionnaire. The 25-item PWSQ was first translated by specialists into Persian. The questionnaire's validity was determined using face, content, criterion and construct validity and reliability of questionnaire was examined using Cronbach's alpha. Confirmatory factor analysis was performed in AMOS and SPSS 21. Participants included healthy Iranian pregnant women (8-39 weeks) who refer to selected hospitals for prenatal care. Hospitals included private, social security and university hospitals and selected through the random cluster sampling method. The results of validity and reliability assessments of the questionnaire were acceptable. Cronbach's alpha calculated showed a high internal consistency of 0.89. The confirmatory factor analysis using the c2, CMIN/DF, IFI, CFI, NFI and NNFI indexes showed the 6-factor model to be the best fitted model for explaining the data. The questionnaire was translated into Persian to examine stress and worry specific to Iranian pregnant women. The psychometric results showed that the questionnaire is suitable for identifying Iranian pregnant women with pregnancy-related stress.

Off-axis impact of unidirectional composites with cracks: Dynamic stress intensification

NASA Technical Reports Server (NTRS)

Sih, G. C.; Chen, E. P.

1979-01-01

The dynamic response of unidirectional composites under off axis (angle loading) impact is analyzed by assuming that the composite contains an initial flaw in the matrix material. The analytical method utilizes Fourier transform for the space variable and Laplace transform for the time variable. The off axis impact is separated into two parts, one being symmetric and the other skew-symmetric with reference to the crack plane. Transient boundary conditions of normal and shear tractions are applied to a crack embedded in the matrix of the unidirectional composite. The two boundary conditions are solved independently and the results superimposed. Mathematically, these conditions reduce the problem to a system of dual integral equations which are solved in the Laplace transform plane for the transformation of the dynamic stress intensity factor. The time inversion is carried out numerically for various combinations of the material properties of the composite and the results are displayed graphically.

The Finite Element Modelling and Dynamic Characteristics Analysis about One Kind of Armoured Vehicles’ Fuel Tanks

NASA Astrophysics Data System (ADS)

Gao, Yang; Ge, Zhishang; Zhai, Weihao; Tan, Shiwang; Zhang, Feng

2018-01-01

The static and dynamic characteristics of fuel tank are studied for the armoured vehicle in this paper. The CATIA software is applied to build the CAD model of the armoured vehicles’ fuel tank, and the finite element model is established in ANSYS Workbench. The finite element method is carried out to analyze the static and dynamic mechanical properties of the fuel tank, and the first six orders of mode shapes and their frequencies are also computed and given in the paper, then the stress distribution diagram and the high stress areas are obtained. The results of the research provide some references to the fuel tanks’ design improvement, and give some guidance for the installation of the fuel tanks on armoured vehicles, and help to improve the properties and the service life of this kind of armoured vehicles’ fuel tanks.

An Overview of Signaling Regulons During Cold Stress Tolerance in Plants

PubMed Central

Pareek, Amit; Khurana, Ashima; Sharma, Arun K.; Kumar, Rahul

2017-01-01

Plants, being sessile organisms, constantly withstand environmental fluctuations, including low-temperature, also referred as cold stress. Whereas cold poses serious challenges at both physiological and developmental levels to plants growing in tropical or sub-tropical regions, plants from temperate climatic regions can withstand chilling or freezing temperatures. Several cold inducible genes have already been isolated and used in transgenic approach to generate cold tolerant plants. The conventional breeding methods and marker assisted selection have helped in developing plant with improved cold tolerance, however, the development of freezing tolerant plants through cold acclimation remains an unaccomplished task. Therefore, it is essential to have a clear understanding of how low temperature sensing strategies and corresponding signal transduction act during cold acclimation process. Herein, we synthesize the available information on the molecular mechanisms underlying cold sensing and signaling with an aim that the summarized literature will help develop efficient strategies to obtain cold tolerant plants. PMID:29204079

Arts as an ecological method to enhance quality of work experience of healthcare staff: a phenomenological-hermeneutic study

PubMed Central

Bojner Horwitz, Eva; Grape Viding, Christina; Rydwik, Elisabeth; Huss, Ephrat

2017-01-01

ABSTRACT This paper explores the impact of self-chosen arts-based recreational activities, as opposed to the traditional arts therapy activities, on the well-being of healthcare providers. Three qualitative case studies of programs in which arts-based activities were used to work with healthcare providers, lasting for 10 weeks each, are phenomenological-hermeneutically evaluated using interviews and focus groups. The findings show what we refer to as an “ecological” ripple of effects: (1) the arts-based activities helped to reduce individual stress and to enhance mood over time, (2) the activities helped to transform workplace relationships within wards, and (3) the arts humanized the overall work climate in the healthcare setting. These effects go beyond those of using the art production as a strategy for stress reduction and imply potential for a more encompassing role for the arts within healthcare. PMID:28609216

Effect of stress, anxiety and depression on unstimulated salivary flow rate and xerostomia.

PubMed

Gholami, Neda; Hosseini Sabzvari, Behrous; Razzaghi, Alireza; Salah, Shilan

2017-01-01

Background. Unstimulated salivary flow rate can be influenced by different factors. This study was undertaken to evaluate the effect of stress, anxiety and depression on unstimulated salivary flow rate in adults. Methods. A total of 247 adult subjects, randomly selected from patients referring to Zanjan Dental School, were included in this investigation. The study procedures consisted of collecting salivary samples (in 5 minutes), completing a form for feeling of xerostomia and completing Depression Anxiety Stress Scale (DASS) Questionnaire to assess the severity of stress, anxiety and depression. Based on the results, the patients were categorized in four groups: Low salivary flow rate plus xerostomia (group 1, n=60), normal salivary flow rate plus xerostomia (group 2, n=59), low salivary flow rate without xerostomia (group 3, n=60) and normal salivary flow rate without xerostomia (control group, n=68). Results. The frequencies of subjects with severe and major depression in groups 1, 2 and 3 were 31.4%, 11.7% and 8.5%, respectively, with 4.4% in the control group. The frequencies of subjects with severe stress in groups 1, 2 and 3 were 21.7%, 3.3% and 11.9%, respectively, with 1.5% in the control group. The frequencies of patients with severe anxiety in groups 1, 2 and 3 were 50%, 30% and 61.1%, respectively, with 4.4% in the control group. Stress, anxiety and depression exhibited a statistically significant relationship with unstimulated salivary flow rate and xerostomia (P<0.05). Conclusion. Stress, anxiety and depression can influence unstimulated salivary flow rate and lead to xerostomia.

Collateral Damage to Satellites from an EMP Attack

DTIC Science & Technology

2010-08-01

peak dose is computed in an infinite half plane of silicon. The resulting in- plane stresses in silicon are shown in Figure VI.23. In- plane refers to...achieved by the SLAR coating 81 Figure VIII.6. Ratio of the peak in- plane compressive stress to the maximum compressive stress for the SLAR coating...82 Figure VIII.7. Maximum in- plane compressive stress in a SLAR coating on DMSP/NOAA subjected to the threat events 83 Figure VIII.8. Maximum in

Secondary Traumatic Stress in Substance Abuse Treatment

ERIC Educational Resources Information Center

Bride, Brian E.; Walls, Erin

2006-01-01

The terms secondary traumatic stress (STS), vicarious traumatization (VT), and compassion fatigue (CF) have all been used, sometimes interchangeably, to refer to the observation that those who provide clinical services to trauma survivors may themselves experience considerable emotional disruption, becoming indirect victims of the trauma.…

Selection of suitable soybean EF1α genes as internal controls for real-time PCR analyses of tissues during plant development and under stress conditions.

PubMed

Saraiva, Kátia D C; Fernandes de Melo, Dirce; Morais, Vanessa D; Vasconcelos, Ilka M; Costa, José H

2014-09-01

The EF1α genes were stable in the large majority of soybean tissues during development and in specific tissues/conditions under stress. Quantitative real-time PCR (qPCR) analysis strongly depends on transcript normalization using stable reference genes. Reference genes are generally encoded by multigene families and are used in qPCR normalization; however, little effort has been made to verify the stability of different gene members within a family. Here, the expression stability of members of the soybean EF1α gene family (named EF1α 1a1, 1a2, 1b, 2a, 2b and 3) was evaluated in different tissues during plant development and stress exposure (SA and PEG). Four genes (UKN1, SKIP 16, EF1β and MTP) already established as stably expressed were also used in the comparative analysis. GeNorm analyses revealed different combinations of reference genes as stable in soybean tissues during development. The EF1α genes were the most stable in cotyledons (EF1α 3 and EF1α 1b), epicotyls (EF1α 1a2, EF1α 2b and EF1α 1a1), hypocotyls (EF1α 1a1 and EF1β), pods (EF1α 2a and EF1α 2b) and roots (EF1α 2a and UKN1) and less stable in tissues such as trifoliate and unifoliate leaves and germinating seeds. Under stress conditions, no suitable combination including only EF1α genes was found; however, some genes were relatively stable in leaves (EF1α 1a2) and roots (EF1α 1a1) treated with SA as well as in roots treated with PEG (EF1α 2b). EF1α 2a was the most stably expressed EF1α gene in all soybean tissues under stress. Taken together, our data provide guidelines for the selection of EF1α genes for use as reference genes in qPCR expression analyses during plant development and under stress conditions.

Using Self-Efficacy as a Construct for Evaluating Science and Mathematics Methods Courses

NASA Astrophysics Data System (ADS)

Brand, Brenda R.; Wilkins, Jesse L. M.

2007-04-01

The focus of this study was elementary preservice teachers’ development as effective teachers of science and mathematics as influenced by their participation in elementary science and mathematics methods courses. Preservice teachers’ reports of factors that influenced their perception of their teaching abilities were analyzed according to Bandura’s (1994) 4 sources of efficacy: mastery experiences, vicarious experiences, social persuasion, and stress reduction. This investigation allowed the researchers to evaluate the courses based on these sources. The analysis indicated all 4 sources influenced preservice teachers’ teaching self-efficacy beliefs, with mastery experiences considered the most influential. Embedded within discussions of mastery experiences were references to the other sources of efficacy, which suggest an interrelationship between mastery experiences and the other sources.

Analyzing and Identifying Teens' Stressful Periods and Stressor Events From a Microblog.

PubMed

Li, Qi; Xue, Yuanyuan; Zhao, Liang; Jia, Jia; Feng, Ling

2017-09-01

Increased health problems among adolescents caused by psychological stress have aroused worldwide attention. Long-standing stress without targeted assistance and guidance negatively impacts the healthy growth of adolescents, threatening the future development of our society. So far, research focused on detecting adolescent psychological stress revealed from each individual post on microblogs. However, beyond stressful moments, identifying teens' stressful periods and stressor events that trigger each stressful period is more desirable to understand the stress from appearance to essence. In this paper, we define the problem of identifying teens' stressful periods and stressor events from the open social media microblog. Starting from a case study of adolescents' posting behaviors during stressful school events, we build a Poisson-based probability model for the correlation between stressor events and stressful posting behaviors through a series of posts on Tencent Weibo (referred to as the microblog throughout the paper). With the model, we discover teens' maximal stressful periods and further extract details of possible stressor events that cause the stressful periods. We generalize and present the extracted stressor events in a hierarchy based on common stress dimensions and event types. Taking 122 scheduled stressful study-related events in a high school as the ground truth, we test the approach on 124 students' posts from January 1, 2012 to February 1, 2015 and obtain some promising experimental results: (stressful periods: recall 0.761, precision 0.737, and F 1 -measure 0.734) and (top-3 stressor events: recall 0.763, precision 0.756, and F 1 -measure 0.759). The most prominent stressor events extracted are in the self-cognition domain, followed by the school life domain. This conforms to the adolescent psychological investigation result that problems in school life usually accompanied with teens' inner cognition problems. Compared with the state-of-the-art top-1 personal life event detection approach, our stressor event detection method is 13.72% higher in precision, 19.18% higher in recall, and 16.50% higher in F 1 -measure, demonstrating the effectiveness of our proposed framework.

Selection of reference genes for expression analysis of Kumamoto and Portuguese oysters and their hybrid

NASA Astrophysics Data System (ADS)

Yan, Lulu; Su, Jiaqi; Wang, Zhaoping; Yan, Xiwu; Yu, Ruihai

2017-12-01

Quantitative real-time polymerase chain reaction (qRT-PCR) is a rapid and reliable technique which has been widely used to quantifying gene transcripts (expression analysis). It is also employed for studying heterosis, hybridization breeding and hybrid tolerability of oysters, an ecologically and economically important taxonomic group. For these studies, selection of a suitable set of housekeeping genes as references is crucial for correct interpretation of qRT-PCR data. To identify suitable reference genes for oysters during low temperature and low salinity stresses, we analyzed twelve genes from the gill tissue of Crassostrea sikamea (SS), Crassostrea angulata (AA) and their hybrid (SA), which included three ribosomal genes, 28S ribosomal protein S5 ( RPS5), ribosomal protein L35 ( RPL35), and 60S ribosomal protein L29 ( RPL29); three structural genes, tubulin gamma ( TUBγ), annexin A6 and A7 ( AA6 and AA7); three metabolic pathway genes, ornithine decarboxylase ( OD), glyceraldehyde-3-phosphate dehydrogenase ( GAPDH) and glutathione S-transferase P1 ( GSP); two transcription factors, elongation factor 1 alpha and beta ( EF1α and EF1β); and one protein synthesis gene (ubiquitin ( UBQ). Primers specific for these genes were successfully developed for the three groups of oysters. Three different algorithms, geNorm, NormFinder and BestKeeper, were used to evaluate the expression stability of these candidate genes. BestKeeper program was found to be the most reliable. Based on our analysis, we found that the expression of RPL35 and EF1α was stable under low salinity stress, and the expression of OD, GAPDH and EF1α was stable under low temperature stress in hybrid (SA) oyster; the expression of RPS5 and GAPDH was stable under low salinity stress, and the expression of RPS5, UBQ, GAPDH was stable under low temperature stress in SS oyster; the expression of RPS5, GAPDH, EF1β and AA7 was stable under low salinity stress, and the expression of RPL35, EF1α, GAPDH and EF1β was stable under low temperature stress in AA oyster. Furthermore, to evaluate their suitability, the reference genes were used to quantify six target genes. In conclusion, we have successfully developed primers appropriate for the expression analysis in SS, SA and AA.

FY16 Status Report on Development of Integrated EPP and SMT Design Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jetter, R. I.; Sham, T. -L.; Wang, Y.

2016-08-01

The goal of the Elastic-Perfectly Plastic (EPP) combined integrated creep-fatigue damage evaluation approach is to incorporate a Simplified Model Test (SMT) data based approach for creep-fatigue damage evaluation into the EPP methodology to avoid the separate evaluation of creep and fatigue damage and eliminate the requirement for stress classification in current methods; thus greatly simplifying evaluation of elevated temperature cyclic service. The EPP methodology is based on the idea that creep damage and strain accumulation can be bounded by a properly chosen “pseudo” yield strength used in an elastic-perfectly plastic analysis, thus avoiding the need for stress classification. The originalmore » SMT approach is based on the use of elastic analysis. The experimental data, cycles to failure, is correlated using the elastically calculated strain range in the test specimen and the corresponding component strain is also calculated elastically. The advantage of this approach is that it is no longer necessary to use the damage interaction, or D-diagram, because the damage due to the combined effects of creep and fatigue are accounted in the test data by means of a specimen that is designed to replicate or bound the stress and strain redistribution that occurs in actual components when loaded in the creep regime. The reference approach to combining the two methodologies and the corresponding uncertainties and validation plans are presented. Results from recent key feature tests are discussed to illustrate the applicability of the EPP methodology and the behavior of materials at elevated temperature when undergoing stress and strain redistribution due to plasticity and creep.« less

Label-free protein assay based on a nanomechanical cantilever array

NASA Astrophysics Data System (ADS)

Arntz, Y.; Seelig, J. D.; Lang, H. P.; Zhang, J.; Hunziker, P.; Ramseyer, J. P.; Meyer, E.; Hegner, M.; Gerber, Ch

2003-01-01

We demonstrate continuous label-free detection of two cardiac biomarker proteins (creatin kinase and myoglobin) using an array of microfabricated cantilevers functionalized with covalently anchored anti-creatin kinase and anti-myoglobin antibodies. This method allows biomarker proteins to be detected via measurement of surface stress generated by antigen-antibody molecular recognition. Reference cantilevers are used to eliminate thermal drifts, undesired chemical reactions and turbulences from injections of liquids by calculating differential deflection signals with respect to sensor cantilevers. The sensitivity achieved for myoglobin detection is below 20 µg ml-1. Both myoglobin and creatin kinase could be detected independently using cantilevers functionalized with the corresponding antibodies, in unspecific protein background. This approach permits the use of up to seven different antigen-antibody reactions simultaneously, including an additional thermomechanical and chemical in situ reference. Applications lie in the field of early and rapid diagnosis of acute myocardial infarction.

Genome-wide analysis of salinity-stress induced DNA methylation alterations in cotton (Gossypium hirsutum L.) using the Me-DIP sequencing technology.

PubMed

Lu, X K; Shu, N; Wang, J J; Chen, X G; Wang, D L; Wang, S; Fan, W L; Guo, X N; Guo, L X; Ye, W W

2017-06-29

Cytosine DNA methylation is a significant form of DNA modification closely associated with gene expression in eukaryotes, fungi, animals, and plants. Although the reference genomes of cotton (Gossypium hirsutum L.) have been publically available, the salinity-stress-induced DNA methylome alterations in cotton are not well understood. Here, we constructed a map of genome-wide DNA methylation characteristics of cotton leaves under salt stress using the methylated DNA immunoprecipitation sequencing method. The results showed that the methylation reads on chromosome 9 were most comparable with those on the other chromosomes, but the greatest changes occurred on chromosome 8 under salt stress. The DNA methylation pattern analysis indicated that a relatively higher methylation density was found in the upstream2k and downstream2k elements of the CDS region and CG-islands. Almost 94% of the reads belonged to LTR-gspsy and LTR-copia, and the number of methylation reads in LTR-gypsy was four times greater than that in LTR-copia in both control and stressed samples. The analysis of differentially methylated regions (DMRs) showed that the gene elements upstream2k, intron, and downstream2k were hypomethylated, but the CDS regions were hypermethylated. The GO (Gene Ontology) analysis suggested that the methylated genes were most enriched in cellular processes, metabolic processes, cell parts and catalytic activities, which might be closely correlated with response to NaCl stress. In this study, we completed a genomic DNA methylation profile and conducted a DMR analysis under salt stress, which provided valuable information for the better understanding of epigenetics in response to salt stress in cotton.

A prospective cohort study to investigate parental stress and child health in low-income Chinese families: protocol paper

PubMed Central

Wong, Rosa Sze Man; Yu, Esther Yee Tak; Guo, Vivian Yawei; Wan, Eric Yuk-Fai; Fung, Colman Siu Cheung; Tung, Keith Tsz Suen; Wong, Wilfred Hing-Sang; Ip, Patrick; Tiwari, Agnes Fung Yee; Lam, Cindy Lo Kuen

2018-01-01

Introduction Chronic stress has adverse effects on health. Adults and children from low-income families are subject to multiple sources of stress. Existing literature about economic hardship mostly focuses on either adults or children but not both. Moreover, there is limited knowledge on the relationship between parental generalised stress and child health problems. This study aims to explore the bidirectional relationship between parental stress and child health in Chinese low-income families and to identify other modifiable factors influencing this relationship. Methods and analysis This prospective cohort study will sample 254 low-income parent–child pairs and follow them up for 24 months with assessments at three time points (baseline, 12 and 24 months) on parental stress, health-related quality of life (HRQOL) and child health and behaviour using both subjective measures and objective physiological parameters. This study will collect data using standardised measures on HRQOL and behaviours of children as well as on HRQOL, mental health and stress levels of parents along with physiological tests of allostatic load and telomere length. The mediating or moderating effect of family harmony, parenting style and neighbourhood conditions will also be assessed. Data will be analysed using latent growth modelling and cross-lagged path analysis modelling to examine the bidirectional effect of parental stress and child health over time. Mediation and moderation analysis will also be conducted to examine the mechanism by which the variables relate. Ethics and dissemination This study was approved by the institutional review board of the University of Hong Kong—the Hospital Authority Hong Kong West Cluster, reference no: UW 16-415. The study findings will be disseminated through peer-reviewed publications and international conferences. Trial registration number NCT03185273; Pre-results. PMID:29472262

DETERMINING MOTOR INERTIA OF A STRESS-CONTROLLED RHEOMETER.

PubMed

Klemuk, Sarah A; Titze, Ingo R

2009-01-01

Viscoelastic measurements made with a stress-controlled rheometer are affected by system inertia. Of all contributors to system inertia, motor inertia is the largest. Its value is usually determined empirically and precision is rarely if ever specified. Inertia uncertainty has negligible effects on rheologic measurements below the coupled motor/plate/sample resonant frequency. But above the resonant frequency, G' values of soft viscoelastic materials such as dispersions, gels, biomaterials, and non-Newtonian polymers, err quadratically due to inertia uncertainty. In the present investigation, valid rheologic measurements were achieved near and above the coupled resonant frequency for a non-Newtonian reference material. At these elevated frequencies, accuracy in motor inertia is critical. Here we compare two methods for determining motor-inertia accurately. For the first (commercially-used) phase method, frequency responses of standard fluids were measured. Phase between G' and G" was analyzed at 5-70 Hz for motor inertia values of 50-150% of the manufacturer's nominal value. For a newly-devised two-plate method (10 mm and 60 mm parallel plates), dynamic measurements of a non-Newtonian standard were collected. Using a linear equation of motion with inertia, viscosity, and elasticity coefficients, G' expressions for both plates were equated and motor inertia was determined to be accurate (by comparison to the phase method) with a precision of ± 3%. The newly developed two-plate method had advantages of expressly eliminating dependence on gap, was explicitly derived from basic principles, quantified the error, and required fewer experiments than the commercially used phase method.

Job Stress and Organizational Commitment among Mentoring Coordinators

ERIC Educational Resources Information Center

Michael, Orly; Court, Deborah; Petal, Pnina

2009-01-01

Purpose: This research aims to examine the impact of job stress on the organizational commitment of a random, representative sample of coordinators in the Israeli educational mentoring organization PMP. Organizational commitment, including affective, continuance and normative commitment, refers to worker relations in the organization, and how…

Early-Emerging Cognitive Vulnerability to Depression and the Serotonin Transporter Promoter Region Polymorphism

PubMed Central

Hayden, Elizabeth P.; Dougherty, Lea R.; Maloney, Bryan; Olino, Thomas M.; Sheikh, Haroon; Durbin, C. Emily; Nurnberger, John I.; Lahiri, Debomoy K.; Klein, Daniel N.

2009-01-01

Background Serotonin transporter promoter (5-HTTLPR) genotype appears to increase risk for depression in the context of stressful life events. However, the effects of this genotype on measures of stress sensitivity are poorly understood. Therefore, this study examined whether 5-HTTLPR genotype was associated with negative information processing biases in early childhood. Method Thirty-nine unselected seven-year-old children completed a negative mood induction procedure and a self-referent encoding task designed to measure positive and negative schematic processing. Children were also genotyped for the 5-HTTLPR gene. Results Children who were homozygous for the short allele of the 5-HTTLPR gene showed greater negative schematic processing following a negative mood prime than those with other genotypes. 5-HTTLPR genotype was not significantly associated with positive schematic processing. Limitations The sample size for this study was small. We did not analyze more recently reported variants of the 5-HTTLPR long alleles. Conclusions 5-HTTLPR genotype is associated with negative information processing styles following a negative mood prime in a nonclinical sample of young children. Such cognitive styles are thought to be activated in response to stressful life events, leading to depressive symptoms; thus, cognitive styles may index the “stress-sensitivity” conferred by this genotype. PMID:17804080

Diabetes Causation Beliefs Among Spanish-Speaking Patients

PubMed Central

Concha, Jeannie Belinda; Mayer, Sallie D.; Mezuk, Briana R.; Avula, Danielle

2016-01-01

Purpose The purpose of this study was to explore how the inquiry of cultural diabetes causation beliefs can improve Hispanic/Latino patient self-management. Methods Two semistructured focus groups were conducted with 13 Hispanic/Latinos adults diagnosed with type 2 diabetes mellitus. Prior to taking part in the group discussion, participants completed a demographic survey and the Illness Perception Questionnaire–Revised. Results The top 5 diabetes causation items endorsed by participants per the questionnaire included stress or worry, behavior, hereditary, diet/eating habits, and family problems/worries. The qualitative analysis revealed stress as a recurring theme for a cause of diabetes. Work stress was specifically identified as a contributor to unhealthy eating and diabetes. Most participants were aware of and believed in susto and referred to it as coraje (anger). Participants believed that asking patients about their diabetes causation beliefs and emotional status can help health professionals (1) better understand the patient and (2) identify and prioritize diabetes treatments. Participants also indicated that the role of doctors is important and the encouragement that they give to patients is clinically and spiritually valued. Conclusions Stress was identified as a cause of diabetes in addition to unhealthy diets and heredity. Asking patients about diabetes causation beliefs and emotional status may help prioritize treatment and management goals. PMID:26568376

Automatic Detection of Regions in Spinach Canopies Responding to Soil Moisture Deficit Using Combined Visible and Thermal Imagery

PubMed Central

Raza, Shan-e-Ahmed; Smith, Hazel K.; Clarkson, Graham J. J.; Taylor, Gail; Thompson, Andrew J.; Clarkson, John; Rajpoot, Nasir M.

2014-01-01

Thermal imaging has been used in the past for remote detection of regions of canopy showing symptoms of stress, including water deficit stress. Stress indices derived from thermal images have been used as an indicator of canopy water status, but these depend on the choice of reference surfaces and environmental conditions and can be confounded by variations in complex canopy structure. Therefore, in this work, instead of using stress indices, information from thermal and visible light imagery was combined along with machine learning techniques to identify regions of canopy showing a response to soil water deficit. Thermal and visible light images of a spinach canopy with different levels of soil moisture were captured. Statistical measurements from these images were extracted and used to classify between canopies growing in well-watered soil or under soil moisture deficit using Support Vector Machines (SVM) and Gaussian Processes Classifier (GPC) and a combination of both the classifiers. The classification results show a high correlation with soil moisture. We demonstrate that regions of a spinach crop responding to soil water deficit can be identified by using machine learning techniques with a high accuracy of 97%. This method could, in principle, be applied to any crop at a range of scales. PMID:24892284

Usefulness of oxidative stress biomarkers evaluated in the snout scraping, serum and Peripheral Blood Cells of Crocodylus moreletii from Southeast Campeche for assessment of the toxic impact of PAHs, metals and total phenols.

PubMed

Dzul-Caamal, Ricardo; Hernández-López, Abigail; Gonzalez-Jáuregui, Mauricio; Padilla, Sergio E; Girón-Pérez, Manuel Ivan; Vega-López, Armando

2016-10-01

In this study, we assessed the effects of inorganic and organic pollutants [As, Cu, Fe, Mn, Pb, Zn, PAHs (11 compounds) and total phenols] from a panel of biomarkers [O2, H2O2, thiobarbituric acid reactive substances (TBARS), carbonyl proteins (RCO), superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GPx) and total cytochrome P450 activities] evaluated in the Snout Scraping (SS), Serum (S) and Peripheral Blood Cells (PBC) of the Morelet's crocodile (Crocodylus moreletii) inhabiting the reference locality (Lake Mocu) and polluted locality (Champoton River) using Principal Component Analysis (PCA). In male crocodiles from the reference site, only H2O2 in PBC was related to levels of fluoranthene on the Keel of Caudal Scales (KCS), but, in females, no association was detected. In contrast, a sex-linked response was detected in specimens from the polluted locality. Levels of benzo[a]pyrene, benzo[a]anthracene, chrysene, pyrene, phenanthrene, acenaphthene, Zn, Cu, and Pb in KCS of the female crocodil were related to the oxidative stress biomarkers on PBC, incluing the total CYP450 activity and levels of O2, H2O2 in serum. However, in male crocodiles, the oxidative stress in SS and in the serum (TBARS, RCO, CAT, GPx), and SOD in PBC was related to As, Pb, Cu, Fe, and benzo[a]pyrene water concentrations and to the burdens of As, Fe, Mn, indeno[1,2,3cd]pyrene in KCS. These results confirm the usefulness of minimal or non-invasive methods of evaluating the oxidative stress response for the environmental monitoring program on the wild Morelet's crocodile that is subject to special protection in Mexican guidelines. Copyright © 2016 Elsevier Inc. All rights reserved.

Diagnostic agreement of the 3 Incontinence Questionnaire to video-urodynamics findings in women with urinary incontinence

PubMed Central

Omar, Mohammad Ali; Laniado, Marc

2017-01-01

Introduction There are limited studies evaluating the 3 Incontinence Questionnaire (3IQ) against urodynamics based diagnosis as a reference standard. The 3IQ has been proposed to be useful to evaluate women at the level of primary care. The aim of this study was to determine correlation between 3IQ and video-urodynamics (VUDS) in diagnosing types of urinary incontinence. Material and methods Prospective data was collected on 200 consecutive female patients referred by primary care physicians for urinary incontinence. The mean age was 55 years (range 15–83 years). The patients were evaluated using the 3IQ and video-urodynamics. The 3IQ-based diagnosis of type of female urinary incontinence was compared to VUDS-based results. Sensitivity, specificity, positive likelihood ratios and positive predictive values were calculated. Results On 3IQ based self-evaluation, 28% of patients were classified as having stress urinary incontinence, 20% with urge incontinence and 40% with mixed incontinence. On video-urodynamics, urodynamic stress urinary incontinence (UDSUI) was detected in 56% of patients, detrusor overactivity (DO) in 15% and mixed urinary incontinence (MUI) in 19%. The 3IQ had a sensitivity and specificity respectively of 43% and 92% for UDSUI, 57% and 86% for DO and 58% and 64% for MUI. The corresponding positive likelihood ratios (CI, 95%) were 5.4 (CI 2.6 to 11.3) for stress urinary incontinence, 4.0 (CI 2.5 to 6.5) for DO and 1.62 (1.2 to 2.3) for MUI. The respective positive predictive values were 87% (CI 75% to 95%), 42% (CI 26% to 58%) and 28% (18% to 39%). Conclusions In our study population, stress urinary incontinence was reasonably well predicted by the 3IQ, but the questionnaire under-performed in the diagnoses of detrusor overactivity and mixed urinaryincontinence. PMID:29732212

Finite element analysis of gravel pile composite foundation under flexible foundation of Airport Engineering

NASA Astrophysics Data System (ADS)

Luo, Min

2018-02-01

On the basis of consulting data, the bearing mechanism of gravel pile composite foundation is analyzed in this paper. The use of ANSYS software under flexible foundation according to the plum blossoms gravel pile additional stress between pile and soil additional stress distribution, load on pile top stress and pile bearing rate of modulus ratio between pile and soil on the pile top stress and rate of pile bearing capacity, pile-soil effect the stress ratio was calculated and analyzed, providing reasonable design reference for the design of gravel pile composite foundation.

Stochastic Simulations of Long-Range Forecasting Models. Volume 3. Technical Appendix

DTIC Science & Technology

1975-10-31

short-term stress in the society; and the balance of coercive capabilities between regimes and dissidents. Of course, the particular measures...and complements the more simple measure of strain, the ratio DEFX/GDP. The concept stress refers to shortages or relative declines in the supply of...valued social, economic, or political goods. Stress was measured by Gurr and Duvall (1972) with, among others, the operational variable DEFX/ GDP

Predicting Adaptive Performance in Multicultural Teams: A Causal Model

DTIC Science & Technology

2008-02-01

with the requirements of the situation. Such evaluations are referred to as stress appraisals ( Lazarus & Folkman , 1984). Stress appraisals are...and Human Decision Processes, 85, 1-31. [15] Lazarus , R.S., & Folkman , S. (1984). Stress, appraisal, and coping. New York: Springer-Verlag...Amos user’s guide. Chicago: Small Waters. [3] Bar-Tal, Y . (1994). The effect on mundane decision-making of the need and ability to achieve cognitive

Elevated hair cortisol concentrations in recently fled asylum seekers in comparison to permanently settled immigrants and non-immigrants.

PubMed

Mewes, R; Reich, H; Skoluda, N; Seele, F; Nater, U M

2017-03-07

Recently fled asylum seekers generally live in stressful conditions. Their residency status is mostly insecure and, similar to other immigrants, they experience stress due to acculturation. Moreover, they often suffer from traumatization and posttraumatic stress disorder (PTSD). All of these factors can result in chronic maladaptive biological stress responses in terms of hyper- or hypocortisolism and, ultimately, illness. We believe the current study is the first to compare hair cortisol concentration (HCC) of recently fled asylum seekers with PTSD to those without PTSD, and to compare HCC of asylum seekers to HCC of permanently settled immigrants and non-immigrant individuals. HCC of the previous 2 months was compared between 24 asylum seekers without PTSD, 32 asylum seekers with PTSD, 24 permanently settled healthy Turkish immigrants and 28 non-immigrant healthy Germans as the reference group. Statistical comparisons were controlled for age, sex and body mass index. No significant difference in HCC was found between asylum seekers with and without PTSD. However, the asylum seekers showed a 42% higher HCC than the reference group. In contrast, the permanently settled immigrants exhibited a 23% lower HCC than the reference group. We found relative hypercortisolism in recently fled asylum seekers, but no difference between persons with and without PTSD. These findings add to the very few studies investigating HCC in groups with recent traumatization and unsafe living conditions. Contrary to the findings in asylum seekers, permanently settled immigrants showed relative hypocortisolism. Both hyper- and hypocortisolism may set the stage for the development of stress-related illnesses.

Beta-carotene reduces oxidative stress, improves glutathione metabolism and modifies antioxidant defense systems in lead-exposed workers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kasperczyk, Sławomir, E-mail: kaslav@mp.pl; Dobrakowski, Michał; Kasperczyk, Janusz

2014-10-01

The aim of this study was to determine whether beta-carotene administration reduces oxidative stress and influences antioxidant, mainly glutathione-related, defense systems in workers chronically exposed to lead. The population consisted of two randomly divided groups of healthy male volunteers exposed to lead. Workers in the first group (reference group) were not administered any antioxidants, while workers in the second group (CAR group) were treated orally with 10 mg of beta-carotene once a day for 12 weeks. Biochemical analysis included measuring markers of lead-exposure and oxidative stress in addition to the levels and activities of selected antioxidants. After treatment, levels ofmore » malondialdehyde, lipid hydroperoxides and lipofuscin significantly decreased compared with the reference group. However, the level of glutathione significantly increased compared with the baseline. Treatment with beta-carotene also resulted in significantly decreased glutathione peroxidase activity compared with the reference group, while the activities of other glutathione-related enzymes and of superoxide dismutase were not significantly changed. However, the activities of glucose-6-phosphate dehydrogenase and catalase, as well as the level of alpha-tocopherol, were significantly higher after treatment compared with the baseline. Despite controversy over the antioxidant properties of beta-carotene in vivo, our findings showed reduced oxidative stress after beta-carotene supplementation in chronic lead poisoning. - Highlights: • Beta-carotene reduces oxidative stress in lead-exposed workers. • Beta-carotene elevates glutathione level in lead-exposed workers. • Beta-carotene administration could be beneficial in lead poisoning.« less

Inflammation, Oxidative Stress, and Antioxidants Contribute to Selected Sleep Quality and Cardiometabolic Health Relationships: A Cross-Sectional Study.

PubMed

Kanagasabai, Thirumagal; Ardern, Chris I

2015-01-01

Sleep is vital for cardiometabolic health, but a societal shift toward poor sleep is a prominent feature of many modern cultures. Concurrently, factors such as diet and lifestyle have also changed and may mediate the relationship between sleep quality and cardiometabolic health. Objectives were to explore (1) the interrelationship and (2) mediating effect of inflammation, oxidative stress, and antioxidants on sleep quality and cardiometabolic health. Cross-sectional data from the US National Health and Nutritional Examination Survey 2005-06 (≥20 y; N = 2,072) was used. Cardiometabolic health was defined as per the Joint Interim Statement; overall sleep quality was determined from six sleep habits and categorized as good, fair, poor, and very poor. Fair quality sleepers had optimal inflammation, oxidative stress, and antioxidant levels. Inflammation was above the current clinical reference range across all sleep quality categories, while oxidative stress was only within the clinical reference range for fair sleep quality. Selected sleep quality-cardiometabolic health relationships were mediated by inflammation, oxidative stress, and antioxidants and were moderated by sex. Our results provide initial evidence of a potential role for inflammation, oxidative stress, and antioxidants in the pathway between poor sleep quality-cardiometabolic decline. Further prospective research is needed to confirm our results.

Validation of Reference Genes for RT-qPCR Studies of Gene Expression in Preharvest and Postharvest Longan Fruits under Different Experimental Conditions

PubMed Central

Wu, Jianyang; Zhang, Hongna; Liu, Liqin; Li, Weicai; Wei, Yongzan; Shi, Shengyou

2016-01-01

Reverse transcription quantitative PCR (RT-qPCR) as the accurate and sensitive method is use for gene expression analysis, but the veracity and reliability result depends on whether select appropriate reference gene or not. To date, several reliable reference gene validations have been reported in fruits trees, but none have been done on preharvest and postharvest longan fruits. In this study, 12 candidate reference genes, namely, CYP, RPL, GAPDH, TUA, TUB, Fe-SOD, Mn-SOD, Cu/Zn-SOD, 18SrRNA, Actin, Histone H3, and EF-1a, were selected. Expression stability of these genes in 150 longan samples was evaluated and analyzed using geNorm and NormFinder algorithms. Preharvest samples consisted of seven experimental sets, including different developmental stages, organs, hormone stimuli (NAA, 2,4-D, and ethephon) and abiotic stresses (bagging and girdling with defoliation). Postharvest samples consisted of different temperature treatments (4 and 22°C) and varieties. Our findings indicate that appropriate reference gene(s) should be picked for each experimental condition. Our data further showed that the commonly used reference gene Actin does not exhibit stable expression across experimental conditions in longan. Expression levels of the DlACO gene, which is a key gene involved in regulating fruit abscission under girdling with defoliation treatment, was evaluated to validate our findings. In conclusion, our data provide a useful framework for choice of suitable reference genes across different experimental conditions for RT-qPCR analysis of preharvest and postharvest longan fruits. PMID:27375640

Long-Term Outcome of Bodily Distress Syndrome in Primary Care: A Follow-Up Study on Health Care Costs, Work Disability, and Self-Rated Health

PubMed Central

Rask, Mette Trollund; Ørnbøl, Eva; Rosendal, Marianne; Fink, Per

2017-01-01

ABSTRACT Objective The upcoming International Classification of Diseases, 11th Revision for primary care use suggests inclusion of a new diagnostic construct, bodily (di)stress syndrome (BDS), for individuals with medically unexplained symptoms. We aimed to explore the long-term outcome of BDS in health care costs, work disability, and self-rated health. Methods Consecutive patients consulting their family physician for a new health problem were screened for physical and mental symptoms by questionnaires (n = 1785). A stratified subsample was examined with a standardized diagnostic interview (n = 701). Patients with single-organ BDS (n = 124) and multiorgan BDS (n = 35), and a reference group with a family physician–verified medical condition (n = 880) were included. All included patients completed a questionnaire at 3, 12, and 24 months of follow-up. Register data on health care costs and work disability were obtained after 2 and 10 years of follow-up, respectively. Results Patients with BDS displayed poorer self-rated health and higher illness worry at index consultation and throughout follow-up than the reference group (p ≤ .001). The annual health care costs were higher in the BDS groups (2270 USD and 4066 USD) than in the reference group (1392 USD) (achieved significance level (ASL) ≤ 0.001). Both BDS groups had higher risk of sick leave during the first 2 years of follow-up (RRsingle-organ BDS = 3.0; 95% confidence interval [CI] = 1.8–5.0; RRmultiorgan BDS = 3.4; 95% CI = 1.5–7.5) and substantially higher risk of newly awarded disability pension than the reference group (HRsingle-organ BDS = 4.9; 95% CI = 2.8–8.4; HRmultiorgan BDS = 8.7; 95% CI = 3.7–20.7). Conclusions Patients with BDS have poor long-term outcome of health care costs, work disability, and subjective suffering. These findings stress the need for adequate recognition and management of BDS. PMID:27768649

Vineyard water status assessment using on-the-go thermal imaging and machine learning.

PubMed

Gutiérrez, Salvador; Diago, María P; Fernández-Novales, Juan; Tardaguila, Javier

2018-01-01

The high impact of irrigation in crop quality and yield in grapevine makes the development of plant water status monitoring systems an essential issue in the context of sustainable viticulture. This study presents an on-the-go approach for the estimation of vineyard water status using thermal imaging and machine learning. The experiments were conducted during seven different weeks from July to September in season 2016. A thermal camera was embedded on an all-terrain vehicle moving at 5 km/h to take on-the-go thermal images of the vineyard canopy at 1.2 m of distance and 1.0 m from the ground. The two sides of the canopy were measured for the development of side-specific and global models. Stem water potential was acquired and used as reference method. Additionally, reference temperatures Tdry and Twet were determined for the calculation of two thermal indices: the crop water stress index (CWSI) and the Jones index (Ig). Prediction models were built with and without considering the reference temperatures as input of the training algorithms. When using the reference temperatures, the best models casted determination coefficients R2 of 0.61 and 0.58 for cross validation and prediction (RMSE values of 0.190 MPa and 0.204 MPa), respectively. Nevertheless, when the reference temperatures were not considered in the training of the models, their performance statistics responded in the same way, returning R2 values up to 0.62 and 0.65 for cross validation and prediction (RMSE values of 0.190 MPa and 0.184 MPa), respectively. The outcomes provided by the machine learning algorithms support the use of thermal imaging for fast, reliable estimation of a vineyard water status, even suppressing the necessity of supervised acquisition of reference temperatures. The new developed on-the-go method can be very useful in the grape and wine industry for assessing and mapping vineyard water status.

Vineyard water status assessment using on-the-go thermal imaging and machine learning

PubMed Central

Gutiérrez, Salvador; Diago, María P.; Fernández-Novales, Juan

2018-01-01

The high impact of irrigation in crop quality and yield in grapevine makes the development of plant water status monitoring systems an essential issue in the context of sustainable viticulture. This study presents an on-the-go approach for the estimation of vineyard water status using thermal imaging and machine learning. The experiments were conducted during seven different weeks from July to September in season 2016. A thermal camera was embedded on an all-terrain vehicle moving at 5 km/h to take on-the-go thermal images of the vineyard canopy at 1.2 m of distance and 1.0 m from the ground. The two sides of the canopy were measured for the development of side-specific and global models. Stem water potential was acquired and used as reference method. Additionally, reference temperatures Tdry and Twet were determined for the calculation of two thermal indices: the crop water stress index (CWSI) and the Jones index (Ig). Prediction models were built with and without considering the reference temperatures as input of the training algorithms. When using the reference temperatures, the best models casted determination coefficients R2 of 0.61 and 0.58 for cross validation and prediction (RMSE values of 0.190 MPa and 0.204 MPa), respectively. Nevertheless, when the reference temperatures were not considered in the training of the models, their performance statistics responded in the same way, returning R2 values up to 0.62 and 0.65 for cross validation and prediction (RMSE values of 0.190 MPa and 0.184 MPa), respectively. The outcomes provided by the machine learning algorithms support the use of thermal imaging for fast, reliable estimation of a vineyard water status, even suppressing the necessity of supervised acquisition of reference temperatures. The new developed on-the-go method can be very useful in the grape and wine industry for assessing and mapping vineyard water status. PMID:29389982

The Metrical Foot in Diyari.

ERIC Educational Resources Information Center

Poser, William

1989-01-01

Considers the metrical foot in Diyari, a South Australian Language, and concludes that, on the basis of stress alone, an argument can be made for the constituency of the metrical stress foot under certain theoretical assumptions. This conclusion is reinforced by the occupance in Diyari of other less theory-dependant phenomena. (46 references) (JL)

Selection and Validation of Appropriate Reference Genes for qRT-PCR Analysis in Isatis indigotica Fort.

PubMed Central

Li, Tao; Wang, Jing; Lu, Miao; Zhang, Tianyi; Qu, Xinyun; Wang, Zhezhi

2017-01-01

Due to its sensitivity and specificity, real-time quantitative PCR (qRT-PCR) is a popular technique for investigating gene expression levels in plants. Based on the Minimum Information for Publication of Real-Time Quantitative PCR Experiments (MIQE) guidelines, it is necessary to select and validate putative appropriate reference genes for qRT-PCR normalization. In the current study, three algorithms, geNorm, NormFinder, and BestKeeper, were applied to assess the expression stability of 10 candidate reference genes across five different tissues and three different abiotic stresses in Isatis indigotica Fort. Additionally, the IiYUC6 gene associated with IAA biosynthesis was applied to validate the candidate reference genes. The analysis results of the geNorm, NormFinder, and BestKeeper algorithms indicated certain differences for the different sample sets and different experiment conditions. Considering all of the algorithms, PP2A-4 and TUB4 were recommended as the most stable reference genes for total and different tissue samples, respectively. Moreover, RPL15 and PP2A-4 were considered to be the most suitable reference genes for abiotic stress treatments. The obtained experimental results might contribute to improved accuracy and credibility for the expression levels of target genes by qRT-PCR normalization in I. indigotica. PMID:28702046

Inclusion of Population-specific Reference Panel from India to the 1000 Genomes Phase 3 Panel Improves Imputation Accuracy.

PubMed

Ahmad, Meraj; Sinha, Anubhav; Ghosh, Sreya; Kumar, Vikrant; Davila, Sonia; Yajnik, Chittaranjan S; Chandak, Giriraj R

2017-07-27

Imputation is a computational method based on the principle of haplotype sharing allowing enrichment of genome-wide association study datasets. It depends on the haplotype structure of the population and density of the genotype data. The 1000 Genomes Project led to the generation of imputation reference panels which have been used globally. However, recent studies have shown that population-specific panels provide better enrichment of genome-wide variants. We compared the imputation accuracy using 1000 Genomes phase 3 reference panel and a panel generated from genome-wide data on 407 individuals from Western India (WIP). The concordance of imputed variants was cross-checked with next-generation re-sequencing data on a subset of genomic regions. Further, using the genome-wide data from 1880 individuals, we demonstrate that WIP works better than the 1000 Genomes phase 3 panel and when merged with it, significantly improves the imputation accuracy throughout the minor allele frequency range. We also show that imputation using only South Asian component of the 1000 Genomes phase 3 panel works as good as the merged panel, making it computationally less intensive job. Thus, our study stresses that imputation accuracy using 1000 Genomes phase 3 panel can be further improved by including population-specific reference panels from South Asia.

Ciproxifan differentially modifies cognitive impairment evoked by chronic stress and chronic corticosterone administration in rats.

PubMed

Trofimiuk, Emil; Braszko, Jan J

2015-04-15

Despite the development of neuroscience and spectacular discoveries, the clear functions and the role of histamine are still not fully understood, especially in the context of the negative impact of prolonged stress exposure on the cognition. The purpose of this study was to evaluate the participation of hypercortisolemia in the detrimental effect of stress on cognitive function and their preclusion by affecting the histaminergic system with ciproxifan. Specifically, we attempted to characterize the preventive action of a single dose of ciproxifan (3mg/kg, i.p.) against an impairment caused by chronic restraint stress as well as parallel exogenous corticosterone (equivalent to that seen in chronically stressed rats), and show differences in the interaction on reference and working memories tested in both aversive (Morris water maze - MWM) and appetitive (Barnes maze-BM) incentives. We found that administration of ciproxifan potently prevented equally deleterious effects of chronic restraint stress (p<0.01) as well as prolonged administration of corticosterone (p<0.01), especially in the tests, which themselves generate high levels of stress. As it turns out, test provided in the less stressful conditions (BM) showed that administration of the H3 receptor antagonist to naïve rats resulted in even memory impairment (p<0.01, in some aspects of reference memory). These data support the idea that modulation of H3 receptors represents a novel and viable therapeutic strategy in the treatment but rather not for prevention of stress-evoked cognitive impairments. Even a single dose abolishes the effect of prolonged exposure to stress or steroids. Copyright © 2015 Elsevier B.V. All rights reserved.

Alteration in Memory and Electroencephalogram Waves with Sub-acute Noise Stress in Albino Rats and Safeguarded by Scoparia dulcis

PubMed Central

Loganathan, Sundareswaran; Rathinasamy, Sheeladevi

2016-01-01

Background: Noise stress has different effects on memory and novelty and the link between them with an electroencephalogram (EEG) has not yet been reported. Objective: To find the effect of sub-acute noise stress on the memory and novelty along with EEG and neurotransmitter changes. Materials and Methods: Eight-arm maze (EAM) and Y-maze to analyze the memory and novelty by novel object test. Four groups of rats were used: Control, control treated with Scoparia dulcis extract, noise exposed, and noise exposed which received Scoparia extract. Results: The results showed no marked difference observed between control and control treated with Scoparia extract on EAM, Y-maze, novel object test, and EEG in both prefrontal and occipital region, however, noise stress exposed rats showed significant increase in the reference memory and working memory error in EAM and latency delay, triad errors in Y-maze, and prefrontal and occipital EEG frequency rate with the corresponding increase in plasma corticosterone and epinephrine, and significant reduction in the novelty test, and significant reduction in the novelty test, amplitude of prefrontal, occipital EEG, and acetylcholine. Conclusion: These noise stress induced changes in EAM, Y-maze, novel object test, and neurotransmitters were significantly prevented when treated with Scoparia extract and these changes may be due to the normalizing action of Scoparia extract on the brain, which altered due to noise stress. SUMMARY Noise stress exposure causes EEG, behavior, and neurotransmitter alteration in the frontoparietal and occipital regions mainly involved in planning and recognition memoryOnly the noise stress exposed animals showed the significant alteration in the EEG, behavior, and neurotransmittersHowever, these noise stress induced changes in EEG behavior and neurotransmitters were significantly prevented when treated with Scoparia extractThese changes may be due to the normalizing action of Scoparia dulcis (adoptogen) on the brain which altered by noise stress. Abbreviations used: EEG: Electroencephalogram, dB: Decibel, EPI: Epinephrine, ACH: Acetylcholine, EAM: Eight-arm maze PMID:27041862

Biomarkers for oxidative stress: clinical application in pediatric medicine.

PubMed

Tsukahara, Hirokazu

2007-01-01

Loads of reactive oxygen species (ROS), including superoxide anion and nitric oxide, that overburden antioxidant systems induce oxidative stress in the body. Major cellular targets of ROS are membrane lipids, proteins, nucleic acids, and carbohydrates. Circumstantial evidence suggests that ROS play a crucial role in the initiation and progression of various diseases in children and adolescents. The involvement of ROS and oxidative stress in pediatric diseases is an important concern, but oxidative stress status in young subjects and appropriate methods for its measurement remain to be defined. Recently, specific biomarkers for oxidative damage and antioxidant defense have been introduced into the field of pediatric medicine. This review is intended to provide an overview of clinical applications of oxidative stress biomarkers in the field of pediatric medicine. First, this review presents the biochemistry and pathophysiology of ROS and antioxidant defense systems. Second, it presents a list of clinically applicable biomarkers, along with pediatric diseases in which enhanced oxidative stress might be involved. The discussion emphasizes that several reliable biomarkers are easily measurable using enzyme-linked immunosorbent assay. Third, this review presents age-related reference normal ranges of oxidative stress biomarkers, including urinary acrolein-lysine, 8-hydroxy-2'-deoxyguanosine, nitrite/nitrate, and pentosidine, and the changes of the parameters in several clinical conditions, including atopic dermatitis and diabetes mellitus. New and interesting data on oxidative stress and antioxidant defenses in neonatal biology are also presented. Fourth, this review discusses the ever-accumulating body of data linking oxidative stress to disturbances of the nitric oxide system and vascular endothelial activation/dysfunction. Finally, this review describes the reported clinical trials that have evaluated the efficacy of antioxidants for oxidative-stress related diseases. Suggestions are advanced for the direction of future trials using antioxidant therapies. Repeated measurement of appropriate parameters will enable us to discern the pathophysiological patterns of pediatric diseases and guide our therapies appropriately.

Stress Drops for Oceanic Crust and Mantle Intraplate Earthquakes in the Subduction Zone of Northeastern Japan Inferred from the Spectral Inversion Analysis

NASA Astrophysics Data System (ADS)

Si, H.; Ishikawa, K.; Arai, T.; Ibrahim, R.

2017-12-01

Understanding stress drop related to intraplate earthquakes in the subducting plate is very important for seismic hazard mitigation. In previous studies, Kita et al. (2015) analyzed stress drops for intraplate earthquakes under Hokkaido, Northern Japan, using S-coda wave spectral ratio analysis methods, and found that the stress drop for events occurring more than 10 km beneath the upper surface of the subducting plate (within the oceanic mantle) was larger than the stress drop for events occurring within 10 km of the upper surface of the subducting plate (in the oceanic crust). In this study, we focus on intraplate earthquakes that occur under Tohoku, Northeastern Japan, to determine whether similar stress drop differences may exist between earthquakes occurring within the upper 10 km of the subducting plate (within the oceanic crust) and those occurring deeper than 10 km (within the oceanic mantle), based on spectral inversion analysis of seismic waveforms recorded during the earthquakes. We selected 64 earthquakes with focal depths between 49-76 km and Mw 3.5-5.0 that occurred in the source area of the 2003 Miyagi-ken-oki earthquake (Mw 7.0) (region 1), and 82 earthquakes with focal depths between 49-67 km and Mw 3.5-5.5 in the source area of the 2011 Miyagi- ken-oki earthquake (Mw 7.1) (region 2). Records from the target earthquakes at 24 stations in region 1 and 21 stations in region 2 were used in the analysis. A 5-sec time window following S-wave onset was used for each station record. Borehole records of KiK-net station (MYGH04) was used as a reference station for both regions 1 and 2. We applied the spectral inversion analysis method of Matsunami et al. (2003) separately to regions 1 and 2. Our results show that stress drop generally increases with focal depth and that the stress drop for events occurring deeper than 10 km in the plate (within the oceanic mantle) were larger than the stress drop for events occurring within 10 km of the upper surface of the plate (within the oceanic crust). These results are consistent with previous studies.

In-depth analysis of internal control genes for quantitative real-time PCR in Brassica oleracea var. botrytis.

PubMed

Sheng, X G; Zhao, Z Q; Yu, H F; Wang, J S; Zheng, C F; Gu, H H

2016-07-15

Quantitative reverse-transcription PCR (qRT-PCR) is a versatile technique for the analysis of gene expression. The selection of stable reference genes is essential for the application of this technique. Cauliflower (Brassica oleracea L. var. botrytis) is a commonly consumed vegetable that is rich in vitamin, calcium, and iron. Thus far, to our knowledge, there have been no reports on the validation of suitable reference genes for the data normalization of qRT-PCR in cauliflower. In the present study, we analyzed 12 candidate housekeeping genes in cauliflower subjected to different abiotic stresses, hormone treatment conditions, and accessions. geNorm and NormFinder algorithms were used to assess the expression stability of these genes. ACT2 and TIP41 were selected as suitable reference genes across all experimental samples in this study. When different accessions were compared, ACT2 and UNK3 were found to be the most suitable reference genes. In the hormone and abiotic stress treatments, ACT2, TIP41, and UNK2 were the most stably expressed. Our study also provided guidelines for selecting the best reference genes under various experimental conditions.

Lace Up for Healthy Feet: The Impact of Shoe Closure on Plantar Stress Response.

PubMed

Rahemi, Hadi; Armstrong, David G; Enriquez, Ana; Owl, Joshua; Talal, Talal K; Najafi, Bijan

2017-07-01

This study examined the impact of shoe closure on plantar thermal stress response (TSR), which is known to be a surrogate of shear stress and skin perfusion. It is aimed to explore potential impact of shoe closure on increasing risk factors associated with plantar ulcers in people with diabetic peripheral neuropathy (DPN). Fifteen eligible subjects were enrolled. The left foot was used as a reference and fitted to a self-adjusted and habitual lace-tightening method by each subject. The right foot was used as a test closure and fitted into three lace closure conditions: loose, tight, and preset optimal closure (reel clutch, BOA technology). Thermal images were taken after 5 minutes of acclimatization (pre-trial) and immediately after 200 walking steps in each shoe closure condition (post-trial). TSR was calculated from the thermal images. TSR was significantly higher in the test closure with loose (70.24%, P = .000) and tight (66.85%, P = .007) and lower (-206.53%, P = .000) in the preset optimal closure when compared to the reference closure. Only lace closure conditions affected TSR with no significant impact from age, BMI, and gender in our sample in a multivariable regression model. The results from this study suggest that shoelace closure technique can have a profound effect on TSR. It therefore stands to reason that optimal lace closure may have an impact in reducing risk of plantar ulcers in people with DPN. Interestingly, results revealed that even a self-adjusted lace closure may not be necessarily optimal and a preset closure setting like reel clutch might ultimately be recommended to minimize risk. Further study is warranted to confirm or refute these interesting results.

Development and Validation of a Precise, Single HPLC Method for the Determination of Tolperisone Impurities in API and Pharmaceutical Dosage Forms.

PubMed

Raju, Thummala Veera Raghava; Seshadri, Raja Kumar; Arutla, Srinivas; Mohan, Tharlapu Satya Sankarsana Jagan; Rao, Ivaturi Mrutyunjaya; Nittala, Someswara Rao

2013-01-01

A novel, sensitive, stability-indicating HPLC method has been developed for the quantitative estimation of Tolperisone-related impurities in both bulk drugs and pharmaceutical dosage forms. Effective chromatographic separation was achieved on a C18 stationary phase with a simple mobile phase combination delivered in a simple gradient programme, and quantitation was by ultraviolet detection at 254 nm. The mobile phase consisted of a buffer and acetonitrile delivered at a flow rate 1.0 ml/min. The buffer consisted of 0.01 M potassium dihydrogen phosphate with the pH adjusted to 8.0 by using diethylamine. In the developed HPLC method, the resolution between Tolperisone and its four potential impurities was found to be greater than 2.0. Regression analysis showed an R value (correlation coefficient) of greater than 0.999 for the Tolperisone impurities. This method was capable of detecting all four impurities of Tolperisone at a level of 0.19 μg/mL with respect to the test concentration of 1000 μg/mL for a 10 µl injection volume. The tablets were subjected to the stress conditions of hydrolysis, oxidation, photolysis, and thermal degradation. Considerable degradation was found to occur in base hydrolysis, water hydrolysis, and oxidation. The stress samples were assayed against a qualified reference standard and the mass balance was found to be close to 100%. The established method was validated and found to be linear, accurate, precise, specific, robust, and rugged.

Are Bank Employees Stressed? Job Perception and Positivity in the Banking Sector: An Italian Observational Study

PubMed Central

Mannocci, Alice; Marchini, Laura; Scognamiglio, Alfredo; Sinopoli, Alessandra; Sernia, Sabina; La Torre, Giuseppe

2018-01-01

Background: The epidemiology of stress on bank workers in Europe is only at the introductory stages. This study investigated for the first time the association between occupational stress level in bank-employees using the BEST8, Karasek-Model and socio-demographic and working factors in Italy. Methods: The observational pilot study involved 384 employees. Three questionnaires were adopted to collect data: Karasek-Model, BEST8 (p < 0.001) and Positivity-Scale. Results: 25% of the sample belonged to high stress group. The workers more stressed were older with a commercial role and consumer of antidepressants/sedatives. Women were much more likely to agree with the perception of feeling unsafe in a possible robbery (OR = 2.42; 95% CI: 1.50–3.91) and with that sales requests were in conflict with one’s own personal moral code (OR = 2.31; 95% CI: 1.38–3.87). Older employees declared feeling inadequate in the workplace (OR = 1.97; 95% CI: 1.07–3.65) and younger employees referred to be anxious about meeting financial budget goals. Workers who had a low positivity had a lower probability of adaptation (OR = 0.88; 95% CI: 0.83–0.93). Conclusions: The occupational stress level in the banking sector involves many aspects: gender, type of bank, role, personal morals, high job-demands, low level of decision-making. This study recommended that banks should implement strategic interventions for well-being of employees, and consequently for their productivity. PMID:29642586

GIS-based Stress Field Modeling of the North Arm of Sulawesi (NAoS) and its application in mineral prospectivity assessment

NASA Astrophysics Data System (ADS)

Albert, Gáspár; Szentpéteri, Krisztián

2017-04-01

Remotely sensed and digital map data are useful sources for regional structural analysis, including stress calculations. If the type of a given fault is determined and is considered as Andersonian, and rather juvenile instead of a reactivated one, the tectonic stress can be calculated for each of the fault segments (Albert et al. 2016). The North Arm of Sulawesi, a west-east-trending land strip of the irregular shaped Sulawesi Island, is actively deforming and the upper plate tectonic setting is quite complex in this region since it is situated above a triple junction of the Eurasian, Pacific and Australian plates. The stress currently acting in this region not only creates neotectonics but triggers subduction-related volcanism shifting from west to east on the peninsula. The volcanic centers - adjacent to transfer faults and the colliding plates at depth - appear to be the most productive areas for epithermal-porphyry mineralization systems of economic potential (Szentpéteri et al. 2015). In this work we demonstrate how the derived stress field model helps to understand the location and clustering of various mineralization types in the NAoS. We examine if this method is applicable for mineral prospectively assessments. References Albert, G., Barancsuk, Á., and Szentpéteri, K., 2016, Stress field modelling from digital geological map data: Geophysical Research Abstracts, v. 18, EGU2016-14565. Szentpéteri, K., Albert, G., and Ungvári, Z., Plate tectonic - and stress field - modeling of the North Arm of Sulawesi, Indonesia, to better understand distribution of mineral deposits styles., in Proceedings SEG 2015 I World Class Ore Deposits: Discovery to Recovery, Wrest Point Convention Centre, Hobart, Australia, September 27 - 30. 2015.

An in vitro investigation of the influence of stenosis severity on the flow in the ascending aorta.

PubMed

Gülan, Utku; Lüthi, Beat; Holzner, Markus; Liberzon, Alex; Tsinober, Arkady; Kinzelbach, Wolfgang

2014-09-01

Cardiovascular diseases can lead to abnormal blood flows, some of which are linked to hemolysis and thrombus formation. Abnormal turbulent flows of blood in the vessels with stenosis create strong shear stresses on blood elements and may cause blood cell destruction or platelet activation. We implemented a Lagrangian (following the fluid elements) measurement technique of three dimensional particle tracking velocimetry that provides insight on the evolution of viscous and turbulent stresses along blood element trajectories. We apply this method to study a pulsatile flow in a compliant phantom of an aorta and compare the results in three cases: the reference case (called "healthy" case), and two cases of abnormal flows due to mild and severe stenosis, respectively. The chosen conditions can mimic a clinical application of an abnormal flow due to a calcific valve. We estimate the effect of aortic stenosis on the kinetic energy of the mean flow and the turbulent kinetic energy, which increases about two orders of magnitude as compared with the healthy flow case. Measuring the total flow stress acting on a moving fluid element that incorporates viscous stresses and the apparent turbulent-induced stresses (the so-called Reynolds stresses) we find out similar increase of the stresses with the increased severity of the stenosis. Furthermore, these unique Lagrangian measurements provide full acceleration and, consequently, the forces acting on the blood elements that are estimated to reach the level that can considerably deform red blood cells. These forces are strong and abrupt due to the contribution of the turbulent fluctuations which is much stronger than the typically measured phase-averaged values. Copyright © 2014 IPEM. Published by Elsevier Ltd. All rights reserved.

Bending behaviors of fully covered biodegradable polydioxanone biliary stent for human body by finite element method.

PubMed

Liu, Yanhui; Zhu, Guoqing; Yang, Huazhe; Wang, Conger; Zhang, Peihua; Han, Guangting

2018-01-01

This paper presents a study of the bending flexibility of fully covered biodegradable polydioxanone biliary stents (FCBPBs) developed for human body. To investigate the relationship between the bending load and structure parameter (monofilament diameter and braid-pin number), biodegradable polydioxanone biliary stents derived from braiding method were covered with membrane prepared via electrospinning method, and nine FCBPBSs were then obtained for bending test to evaluate the bending flexibility. In addition, by the finite element method, nine numerical models based on actual biliary stent were established and the bending load was calculated through the finite element method. Results demonstrate that the simulation and experimental results are in good agreement with each other, indicating that the simulation results can be provided a useful reference to the investigation of biliary stents. Furthermore, the stress distribution on FCBPBSs was studied, and the plastic dissipation analysis and plastic strain of FCBPBSs were obtained via the bending simulation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Internal Stresses in Laminated Construction

NASA Technical Reports Server (NTRS)

Heim, A L; Knauss, A C; Seutter, Louis

1923-01-01

This report reviews the procedure employed in an investigation of the sources and influence of internal stresses in laminated construction, and discusses the influence of shrinkage and swelling stresses caused by atmospheric conditions upon the tensile strength across grain in laminated construction with special reference to airplane propellers. The investigation covered three sources of internal stress, namely, the combination of plain-sawed and quarter-sawed material in the same construction, the gluing together of laminations of different moisture contents, and the gluing together of laminations of different densities. Glued specimens and free specimens, made up under various manufacturing conditions, were subjected to various climatic changes inducing internal stresses and then were tested.

Residual stress characterization of steel TIG welds by neutron diffraction and by residual magnetic stray field mappings

NASA Astrophysics Data System (ADS)

Stegemann, Robert; Cabeza, Sandra; Lyamkin, Viktor; Bruno, Giovanni; Pittner, Andreas; Wimpory, Robert; Boin, Mirko; Kreutzbruck, Marc

2017-03-01

The residual stress distribution of tungsten inert gas welded S235JRC+C plates was determined by means of neutron diffraction (ND). Large longitudinal residual stresses with maxima around 600 MPa were found. With these results as reference, the evaluation of residual stress with high spatial resolution GMR (giant magneto resistance) sensors was discussed. The experiments performed indicate a correlation between changes in residual stresses (ND) and the normal component of local residual magnetic stray fields (GMR). Spatial variations in the magnetic field strength perpendicular to the welds are in the order of the magnetic field of the earth.

Statistical damage constitutive model for rocks subjected to cyclic stress and cyclic temperature

NASA Astrophysics Data System (ADS)

Zhou, Shu-Wei; Xia, Cai-Chu; Zhao, Hai-Bin; Mei, Song-Hua; Zhou, Yu

2017-10-01

A constitutive model of rocks subjected to cyclic stress-temperature was proposed. Based on statistical damage theory, the damage constitutive model with Weibull distribution was extended. Influence of model parameters on the stress-strain curve for rock reloading after stress-temperature cycling was then discussed. The proposed model was initially validated by rock tests for cyclic stress-temperature and only cyclic stress. Finally, the total damage evolution induced by stress-temperature cycling and reloading after cycling was explored and discussed. The proposed constitutive model is reasonable and applicable, describing well the stress-strain relationship during stress-temperature cycles and providing a good fit to the test results. Elastic modulus in the reference state and the damage induced by cycling affect the shape of reloading stress-strain curve. Total damage induced by cycling and reloading after cycling exhibits three stages: initial slow increase, mid-term accelerated increase, and final slow increase.

Depression and anxiety in the reindeer-herding Sami population of Sweden.

PubMed

Kaiser, Niclas; Sjölander, Per; Liljegren, Annette Edin; Jacobsson, Lars; Renberg, Ellinor Salander

2010-09-01

The objective of this study was to investigate symptoms and predicting factors of depression and anxiety among reindeer-herding Sami in Sweden. A total of 319 reindeer-herding Sami (168 men, 151 women) were compared with urban and rural reference populations comprising 1,393 persons (662 men, 731 women). A cross-sectional questionnaire study on mental health, which included the Hospital Anxiety and Depression Scale (HADS). Data were analysed with regard to population, gender, age group, education and work-related stress. The Sami population disclosed higher mean values for both depression and anxiety than the reference groups, with Sami men reporting the highest rates. Work-related stress was associated with anxiety and depression in the Sami group. By comparing Sami men and women with reference groups of men and women living in urban and rural areas in northern Sweden, this study identified that reindeer-herding Sami men require special attention with regard to mental health problems.

Posttraumatic stress and symptom improvement in Norwegian tourists exposed to the 2004 tsunami – a longitudinal study

PubMed Central

2013-01-01

Background Mental health consequences of disasters are frequently studied. However, few studies have investigated symptom improvement in victims after natural disasters. This study aimed to identify predictors of 6 months post-disaster stress symptoms and to study 6 months and 24 months course of symptoms among Norwegian tourists who experienced the 2004 tsunami. Methods Norwegian tourists (≥18 years) who experienced the 2004 tsunami (n = 2468) were invited to return a postal questionnaire at two points of time. The first data set was collected at 6 months (T1, n = 899) and the second data set at 24 months post-disaster (T2, n = 1180). The population studied consisted of those who responded at both assessments (n = 674). Impact of Event Scale Revised (IES-R) was used to measure posttraumatic stress symptoms. IES–R score ≥33 (caseness) was used to identify various symptom trajectories from T1 to T2. Multiple linear regression was used to determine predictors of posttraumatic stress at T1 and to identify variables associated with symptom improvement from T1 to T2. Results The majority was identified as non-case at both assessments (57.7%), while 20.8% of the respondents were identified as case at both assessments. Symptoms at T1 were positively related to female gender, older age, unemployment, being chased or caught by the waves, witnessing death or suffering, loss of loved ones, experiencing intense fear during the disaster, low conscientiousness, neuroticism and low levels of social support. The IES-R sum score declined from 24.6 (SD = 18.5) at T1 to 22.9 (SD = 18.3) at T2, p < 0.001. Emotional stability and high IES-R scores at T1 were positively related to symptom improvement, while received social support was not. Being referred to a mental health specialist was negatively related to symptom improvement. Conclusions A significant minority (20-30%) among Norwegian tourists developed enduring posttraumatic stress symptoms in the aftermath of the 2004 tsunami. Tsunami exposure, peritraumatic fear, neuroticism and low levels of social support were the strongest predictors of posttraumatic stress at 6 months post-disaster. Decrease in posttraumatic stress was related to emotional stability and higher symptom levels at T1. Being referred to a mental health specialist did not facilitate symptom improvement. PMID:24063414

Shape and size of the body vs. musculoskeletal stress markers.

PubMed

Myszka, Anna; Piontek, Janusz

2010-01-01

The objective of this paper is to assess the relationship between the degree of development of muscle attachment sites (musculoskeletal stress markers - MSM1) and the length and circumference measurements of long bones and the body build expressed with the reconstructed values of body height (BH) and body mass (BM). The bone material (102 male and 99 female skeletons) used in the study was collected in the medieval burial ground in Cedynia, Poland. The authors analyzed 10 musculoskeletal stress markers located on the scapula (2), humerus (2), radius (2), femur (2) and tibia (2). The frequency and the degree of expression of muscle attachment size was carried out using the scale prepared by Myszka (2007). The scale encompassed three degrees of expression of muscle attachment size. Only changes of robusticity type (nonpathological changes) were taken into account. The assessment of body build of individuals was carried out according to the method proposed by Vancata & Charvátová (2001). Body height was reconstructed from the length of the humerus and femur using eight equations. Body mass was reconstructed from the measurements of the breadth of the proximal and distal sections of the femur and tibia (mechanical method) using twenty one equations. The equations were developed for different reference populations. The same equations were used for men and women. The correlation between the MSM and the length and circumference measurements of the bones was analyzed using the principal components analysis and the Gamma correlation coefficient. The strength of the correlation between the reconstructed body build traits (BH, BM) and the moderate degree of musculoskeletal stress markers expression was studied based on the principal components method and the Pearson correlation coefficient. A linear correlation was found between musculoskeletal stress markers and the circumference measurements and the reconstructed body mass, but no relationship with body height and the length measurements of long bones was revealed. From previous research it is evident that the relationship between the MSM and metric skeletal traits does not occur in every population. Divergent findings necessitate further corroboration of results on diverse skeletal material.

Canopy temperature for simulation of heat stress in irrigated wheat in a semi-arid environment: a multi-model comparison

USDA-ARS?s Scientific Manuscript database

Mounting evidence suggests that even brief periods of high temperatures occurring around flowering and during grain filling can severely reduce grain yield in cereals, a phenomenon referred to as heat stress. Recently, ecophysiological models of crops models have begun to represent such phenomena. M...

The Ambivalence of Challenge Stressors: Time Pressure Associated with Both Negative and Positive Well-Being

ERIC Educational Resources Information Center

Widmer, Pascale S.; Semmer, Norbert K.; Kalin, Wolfgang; Jacobshagen, Nicola; Meier, Laurenz L.

2012-01-01

According to the challenge-hindrance model, challenge stressors contain both stressful and challenging aspects, hindrance stressors only stressful aspects. Typically, negative outcomes of challenge stressors refer to well-being (strain), positive outcomes to so-called work outcomes (e.g., productivity, intention to quit). As both effects occur…

International Adoption in the U. S: Traumatic Stress and Normal Developmental Responses

ERIC Educational Resources Information Center

Wolfgang, Jeff Drayton

2011-01-01

The purpose of this paper is to present a review of literature on internationally adopted children in the U.S. that provides context, references for normal development, and describes traumatic stress with children. This gives counselors and other professionals who work with young children and families of international adoption a conceptual…

Physiological Regulation of Stress in Referred Adolescents: The Role of the Parent-Adolescent Relationship

ERIC Educational Resources Information Center

Willemen, Agnes M.; Schuengel, Carlo; Koot, Hans M.

2009-01-01

Background: Psychopathology in youth appears to be linked to deficits in regulating affective responses to stressful situations. In children, high-quality parental support facilitates affect regulation. However, in adolescence, the role of parent-child interaction in the regulation of affect is unclear. This study examined physiological reactivity…

SPAR reference manual

NASA Technical Reports Server (NTRS)

Whetstone, W. D.

1976-01-01

The functions and operating rules of the SPAR system, which is a group of computer programs used primarily to perform stress, buckling, and vibrational analyses of linear finite element systems, were given. The following subject areas were discussed: basic information, structure definition, format system matrix processors, utility programs, static solutions, stresses, sparse matrix eigensolver, dynamic response, graphics, and substructure processors.

Using eddy covariance and flux partitioning to assess basal, soil, and stress coefficients for crop evapotranspiration models

USDA-ARS?s Scientific Manuscript database

Current approaches to scheduling crop irrigation using reference evapotranspiration (ET0) recommend using a dual-coefficient approach using basal (Kcb) and soil (Ke) coefficients along with a stress coefficient (Ks) to model crop evapotranspiration (ETc), [e.g. ETc=(Ks*Kcb+Ke)*ET0]. However, indepe...

Field-scale mapping of evaporative stress indicators of crop yield: an application over Mead, Nebraska

USDA-ARS?s Scientific Manuscript database

The Evaporative Stress Index (ESI) quantifies temporal anomalies in a normalized evapotranspiration (ET) metric describing the ratio of actual-to-reference ET (fRET) as derived from satellite remote sensing. At coarse, regional scales (5-10 km resolution), the ESI has demonstrated capacity to captur...

Biological Sciences, Social Sciences and the Languages of Stress

ERIC Educational Resources Information Center

Youdell, Deborah; Harwood, Valerie; Lindley, Martin R.

2018-01-01

There are well documented concerns with the imposition of high stakes testing into the fabric of school education, and there is now an increasing focus on how such tests impact children's "well-being." This can be witnessed in reports in the popular news media, where discussion of these impacts frequently refer to "stress" and…

On the use of imaginary faults in palaeostress analysis

NASA Astrophysics Data System (ADS)

Shan, Yehua; Liang, Xinquan

2017-11-01

The imaginary fault refers to the counterpart of a certain given fault that has a similar expression about the Wallace-Bott hypothesis. It is included to further reduce the feasible fields for the principal stress directions using the right dihedra method. The given fault and its imaginary fault have a similar dip-slip sense under the extensional or compressional regime but, as proved in this paper, a different dip-slip sense under the strike-slip regime. Their relation in dip-slip sense does no change with the rotation of the coordinate system, thus making possible the general use in the reduction of the imaginary faults under any tectonic regime. A procedure for this use is proposed and applied to a real example to demonstrate the feasibility of this method.

A comparison the effects of reflexology and relaxation on the psychological symptoms in women with multiple sclerosis.

PubMed

Soheili, Mozhgan; Nazari, Fatemeh; Shaygannejad, Vahid; Valiani, Mahboobeh

2017-01-01

Multiple sclerosis (MS) occurs with a variety of physical and psychological symptoms, yet there is not a conclusive cure for this disease. Complementary medicine is a current treatment which seems is effective in relieving symptoms of patients with MS. Therefore, this study is aimed to determine and compare the effects of reflexology and relaxation on anxiety, stress, and depression in women with MS. This study is a randomized clinical trial that is done on 75 women with MS referred to MS Clinic of Kashani Hospital. After simple non random sampling, participants were randomly assigned by minimization method to three groups: reflexology, relaxation and control (25 patients in each group). In the experimental groups were performed reflexology and relaxation interventions within 4 weeks, twice a week for 40 min and the control group were received only routine treatment as directed by a doctor. Data were collected through depression anxiety and stress scale questionnaire, before, immediately after and 2 months after interventions in all three groups. Chi-square, Kruskal-Wallis, repeated measures analysis of variance and one-way analysis of variance and least significant difference post hoc test via SPSS version 18 were used to analyze the data ( P < 0.05) was considered as significant level. The results showed a significant reduction in the severity of anxiety, stress and depression during the different times in the reflexology and relaxation groups as compared with the control group ( P < 0.05). The results showed that reflexology and relaxation in relieving anxiety, stress and depression are effective in women with MS. Hence, these two methods, as effective techniques, can be recommended.

Gender stress: a preliminary survey with specific reference to female physicians.

PubMed

Davis, E M

1993-09-01

Practicing female physicians in Trinidad and Tobago were studied to identify major causal factors of negative stress. Results indicated that major stressors were as follows: job (36%), finance (32%), children (20%), relationships (20%). The minor stressors identified were: children (48%), finance (36%), relationships (36%), job (32%), and health (20%). The physicians showed the ability to cope with the stress and this was attributed to, inter alia, self-sufficiency, empowerment, self-fulfillment and gender.

Measures of Bulk and Grain Strain in Deformation Processes(PREPRINT)

DTIC Science & Technology

2007-04-01

the process and a similar measure of the flow stress of the material. The effective , or equivalent, strain, based on an analogous definition for...The conjugate effective stress in this case is the uniaxial tensile stress . Based on equations (12) and (13), expressions for effective bulk strains...t |L(t)| in the reference state deformed to an image, x′ = t′ | L′(t′)|, in the deformed state . In both cases an equation of the form of

METRO-APEX Volume 18.1: Legal Reference Manual. Revised.

ERIC Educational Resources Information Center

University of Southern California, Los Angeles. COMEX Research Project.

The Legal Reference Manual is one of a set of twenty-one manuals used in METRO-APEX 1974, a computerized college and professional level, computer-supported, role-play, simulation exercise of a community with "normal" problems. Stress is placed on environmental quality considerations. APEX 1974 is an expansion of APEX--Air Pollution…

Verification of conventional equations of state for tantalum under quasi-isentropic compression

DOE Office of Scientific and Technical Information (OSTI.GOV)

Binqiang, Luo; Guiji, Wang; Jianjun, Mo

2014-11-21

Shock Hugoniot data have been widely used to calibrate analytic equations of state (EOSs) of condensed matter at high pressures. However, the suitability of particular analytic EOSs under off-Hugoniot states has not been sufficiently verified using experimental data. We have conducted quasi-isentropic compression experiments (ICEs) of tantalum using the compact pulsed power generator CQ-4, and explored the relation of longitudinal stress versus volume of tantalum under quasi-isentropic compression using backward integration and characteristic inverse methods. By subtracting the deviatoric stress and additional pressure caused by irreversible plastic dissipation, the isentropic pressure can be extracted from the longitudinal stress. Several theoreticalmore » isentropes are deduced from analytic EOSs and compared with ICE results to validate the suitability of these analytic EOSs in isentropic compression states. The comparisons show that the Gruneisen EOS with Gruneisen Gamma proportional to volume is accurate, regardless whether the Hugoniot or isentrope is used as the reference line. The Vinet EOS yields better accuracy in isentropic compression states. Theoretical isentropes derived from Tillotson, PUFF, and Birch-Murnaghan EOSs well agree with the experimental isentrope in the range of 0–100 GPa, but deviate gradually with pressure increasing further.« less

Structural analysis of Aircraft fuselage splice joint

NASA Astrophysics Data System (ADS)

Udaya Prakash, R.; Kumar, G. Raj; Vijayanandh, R.; Senthil Kumar, M.; Ramganesh, T.

2016-09-01

In Aviation sector, composite materials and its application to each component are one of the prime factors of consideration due to the high strength to weight ratio, design flexibility and non-corrosive so that the composite materials are widely used in the low weight constructions and also it can be treated as a suitable alternative to metals. The objective of this paper is to estimate and compare the suitability of a composite skin joint in an aircraft fuselage with different joints by simulating the displacement, normal stress, vonmises stress and shear stress with the help of numerical solution methods. The reference Z-stringer component of this paper is modeled by CATIA and numerical simulation is carried out by ANSYS has been used for splice joint presents in the aircraft fuselage with three combinations of joints such as riveted joint, bonded joint and hybrid joint. Nowadays the stringers are using to avoid buckling of fuselage skin, it has joined together by rivets and they are connected end to end by splice joint. Design and static analysis of three-dimensional models of joints such as bonded, riveted and hybrid are carried out and results are compared.

Young adults' medicine use for headache: the combined effect of socioeconomic position and perceived stress, and the contribution of sense of coherence.

PubMed

Koushede, Vibeke; Hansen, Ebba Holme; Andersen, Anette; Holstein, Bjørn E

2012-01-01

Over-the-counter analgesic (OTCA) use is increasingly common and may have potential harmful side effects. The primary reason for using analgesics is headache symptoms. Whether OTCA use for headache is sensitive to psychosocial and social circumstances is an understudied topic. The purpose of this study was to examine the combined effect of socioeconomic position (SEP) and perceived stress on OTCA use for headache. An additional objective was to determine whether sense of coherence (SOC) modifies the association. Data derived from the cross-sectional "Danish Lifestyle and Medicine Use Study," 2009. The study population consisted of men and women ages 25-44 years (n = 955). The dependent variable was OTCA use for headache within the past 14 days. The independent variables were SEP, perceived stress, and SOC. Gender, headache prevalence, and response method were included as covariates. Associations were examined by means of logistic regression analyses, and reported as odds ratios (ORs) with 95% confidence intervals. The OR for OTCA use was 1.42 (0.94-2.14) (statistically nonsignificant) among participants with low SEP but no perceived stress (reference high SEP, no perceived stress), 2.09 (1.53-2.85) for participants with perceived stress and high SEP, and 2.65 (1.66-4.25) among participants with perceived stress and low SEP. In analysis, stratified by SOC associations were stronger among participants with low SOC than among those with high SOC. Individuals exposed to both low SEP and high perceived stress have high odds for using OTCA for headache, apparently higher than participants only exposed to 1 of these factors. SOC may act as a buffer against the harmful effects of perceived stress and low SEP on OTCA use. Health care professionals and policymakers need to be aware of the sensitivity of OTCA use to psychosocial and social circumstances. Copyright © 2012 Elsevier Inc. All rights reserved.

A Multicenter, Prospective Study to Evaluate the Use of Contrast Stress Echocardiography in Early Menopausal Women at Risk for Coronary Artery Disease: Trial Design and Baseline Findings

PubMed Central

Abdelmoneim, Sahar S.; Bernier, Mathieu; Hagen, Mary E.; Eifert-Rain, Susan; Bott-Kitslaar, Dalene; Wilansky, Susan; Castello, Ramon; Bhat, Gajanan; Pellikka, Patricia A.; Best, Patricia J. M.; Hayes, Sharonne N.

2013-01-01

Abstract Aims This multisite prospective trial, Stress Echocardiography in Menopausal Women At Risk for Coronary Artery Disease (SMART), aimed to evaluate the prognostic value of contrast stress echocardiography (CSE), coronary artery calcification (CAC), and cardiac biomarkers for prediction of cardiovascular events after 2 and 5 years in early menopausal women experiencing chest pain symptoms or risk factors. This report describes the study design, population, and initial test results at study entry. Methods From January 2004 through September 2007, 366 early menopausal women (age 54±5 years, Framingham risk score 6.51%±4.4 %, range 1%–27%) referred for stress echocardiography were prospectively enrolled. Image quality was enhanced with an ultrasound contrast agent. Tests for cardiac biomarkers [high-sensitivity C-reactive protein (hsCRP), atrial natriuretic protein (ANP), brain natriuretic protein (BNP), endothelin (ET-1)] and cardiac computed tomography (CT) for CAC were performed. Results CSE (76% exercise, 24% dobutamine) was abnormal in 42 women (11.5%), and stress electrocardiogram (ECG) was positive in 22 women (6%). Rest BNP correlated weakly with stress wall motion score index (WMSI) (r=0.189, p<0.001). Neither hsCRP, ANP, endothelin, nor CAC correlated with stress WMSI. Predictors of abnormal CSE were body mass index (BMI), diabetes mellitus, family history of premature coronary artery disease (CAD), and positive stress ECG. Twenty-four women underwent clinically indicated coronary angiography (CA); 5 had obstructive (≥50%), 15 had nonobstructive (10%–49%), and 4 had no epicardial CAD. Conclusions The SMART trial is designed to assess the prognostic value of CSE in early menopausal women. Independent predictors of positive CSE were BMI, diabetes mellitus, family history of premature CAD, and positive stress ECG. CAC scores and biomarkers (with the exception of rest BNP) were not correlated with CSE results. We await the follow-up data. PMID:23398128

Clinical experimental stress studies: methods and assessment.

PubMed

Bali, Anjana; Jaggi, Amteshwar Singh

2015-01-01

Stress is a state of threatened homeostasis during which a variety of adaptive processes are activated to produce physiological and behavioral changes. Stress induction methods are pivotal for understanding these physiological or pathophysiological changes in the body in response to stress. Furthermore, these methods are also important for the development of novel pharmacological agents for stress management. The well-described methods to induce stress in humans include the cold pressor test, Trier Social Stress Test, Montreal Imaging Stress Task, Maastricht Acute Stress Test, CO2 challenge test, Stroop test, Paced Auditory Serial Addition Task, noise stress, and Mannheim Multicomponent Stress Test. Stress assessment in humans is done by measuring biochemical markers such as cortisol, cortisol awakening response, dexamethasone suppression test, salivary α-amylase, plasma/urinary norepinephrine, norepinephrine spillover rate, and interleukins. Physiological and behavioral changes such as galvanic skin response, heart rate variability, pupil size, and muscle and/or skin sympathetic nerve activity (microneurography) and cardiovascular parameters such as heart rate, blood pressure, and self-reported anxiety are also monitored to assess stress response. This present review describes these commonly employed methods to induce stress in humans along with stress assessment methods.

A Review and Proposed Rationale for the use of Ultrasonography as a Diagnostic Modality in the Identification of Bone Stress Injuries.

PubMed

Fukushima, Yaeko; Ray, Jeremiah; Kraus, Emily; Syrop, Isaac P; Fredericson, Michael

2018-04-14

Bone stress injuries are common in military personnel and athletes. The delayed diagnosis of a bone stress injury can lead to a more severe injury that requires a longer period of treatment. The early detection of bone stress injuries is a central part of management. Currently, the reference standard for detecting bone stress injuries is magnetic resonance imaging. However, the expanding use of point-of-care ultrasonography (US) may enable the early detection of bone stress injuries in the clinical setting. In this article, we review the US detection of bone stress injuries, as well as discuss the rationale for the use of US in the diagnosis of these injuries. © 2018 by the American Institute of Ultrasound in Medicine.

Value of lateral blood pool imaging in patients with suspected stress fractures of the tibia.

PubMed

Mohan, Hosahalli K; Clarke, Susan E M; Centenara, Martin; Lucarelli, Amanda; Baron, Daniel; Fogelman, Ignac

2011-03-01

To critically evaluate the use of lateral blood pool imaging in athletes with lower limb pain and with a clinical suspicion of stress fracture. Two experienced nuclear medicine physicians evaluated 3-phase bone scans using 99mTc-methylene diphosphonate performed in 50 consecutive patients referred from a specialist sports injury clinic for suspected tibial stress fracture. The vascularity to the tibia as seen on the blood pool (second phase) images in the anterior/posterior views was compared with the lateral/medial view assessments. Stress fractures were presumed to be present when on the delayed images (third phase) there was a focal or fusiform area of increased tracer uptake involving the tibial cortex. Shin splints which are a recognized cause of lower limb pain in athletes mimicking stress fracture were diagnosed if increased tracer uptake was seen extending along the posterior tibial surface with no significant focal or fusiform area of uptake within this. Inter-reviewer agreement for the assessment of vascularity was also assessed using Cohen's Kappa scores. Twenty-four stress fractures in 24 patients and 66 shin splints in 40 patients were diagnosed. In 18 patients stress fracture and shin splints coexisted. In 10 patients no tibial pathology was identified. Of the 24 patients diagnosed with stress fractures, lateral/medial blood pool imaging was superior in the assessment of blood pool activity (P < 0.001) identifying increased vascularity in 21 cases compared with the anterior/posterior views positive in only 11 cases. The inter-reviewer agreement was near perfect for lateral/medial views, κ = 0.86 while very good for anterior/posterior views, κ = 0.68. In patients with suspected tibial stress fractures, lateral views of the tibia provide the optimal method for evaluation of vascularity. Prospective studies with quantitative or semi-quantitative assessment of skeletal vascularity could provide supplementary information relating to the pathophysiology of stress fractures, for example, the time scale of vascular changes after a tibial stress fracture, and potentially could have clinical relevance as to the assessment of the severity of stress fractures and their prognosis.

Evaluation of Reference Genes for Real-Time Quantitative PCR Analysis in Larvae of Spodoptera litura Exposed to Azadirachtin Stress Conditions

PubMed Central

Shu, Benshui; Zhang, Jingjing; Cui, Gaofeng; Sun, Ranran; Sethuraman, Veeran; Yi, Xin; Zhong, Guohua

2018-01-01

Azadirachtin is an efficient and broad-spectrum botanical insecticide against more than 150 kinds of agricultural pests with the effects of mortality, antifeedant and growth regulation. Real-time quantitative polymerase chain reaction (RT-qPCR) could be one of the powerful tools to analyze the gene expression level and investigate the mechanism of azadirachtin at transcriptional level, however, the ideal reference genes are needed to normalize the expression profiling of target genes. In this present study, the fragments of eight candidate reference genes were cloned and identified from the pest Spodoptera litura. In addition, the expression stability of these genes in different samples from larvae of control and azadirachtin treatments were evaluated by the computational methods of NormFinder, BestKeeper, Delta CT, geNorm, and RefFinder. According to our results, two of the reference genes should be the optimal number for RT-qPCR analysis. Furthermore, the best reference genes for different samples were showed as followed: EF-1α and EF2 for cuticle, β-Tubulin and RPL7A for fat body, EF2 and Actin for midgut, EF2 and RPL13A for larva and RPL13A and RPL7A for all the samples. Our results established a reliable normalization for RT-qPCR experiments in S. litura and ensure the data more accurate for the mechanism analysis of azadirachtin. PMID:29695976

Evaluation of Reference Genes for Real-Time Quantitative PCR Analysis in Larvae of Spodoptera litura Exposed to Azadirachtin Stress Conditions.

PubMed

Shu, Benshui; Zhang, Jingjing; Cui, Gaofeng; Sun, Ranran; Sethuraman, Veeran; Yi, Xin; Zhong, Guohua

2018-01-01

Azadirachtin is an efficient and broad-spectrum botanical insecticide against more than 150 kinds of agricultural pests with the effects of mortality, antifeedant and growth regulation. Real-time quantitative polymerase chain reaction (RT-qPCR) could be one of the powerful tools to analyze the gene expression level and investigate the mechanism of azadirachtin at transcriptional level, however, the ideal reference genes are needed to normalize the expression profiling of target genes. In this present study, the fragments of eight candidate reference genes were cloned and identified from the pest Spodoptera litura . In addition, the expression stability of these genes in different samples from larvae of control and azadirachtin treatments were evaluated by the computational methods of NormFinder, BestKeeper, Delta CT, geNorm, and RefFinder. According to our results, two of the reference genes should be the optimal number for RT-qPCR analysis. Furthermore, the best reference genes for different samples were showed as followed: EF-1α and EF2 for cuticle, β-Tubulin and RPL7A for fat body, EF2 and Actin for midgut, EF2 and RPL13A for larva and RPL13A and RPL7A for all the samples. Our results established a reliable normalization for RT-qPCR experiments in S. litura and ensure the data more accurate for the mechanism analysis of azadirachtin.

An Evaluation of Portable Wet Bulb Globe Temperature Monitor Accuracy.

PubMed

Cooper, Earl; Grundstein, Andrew; Rosen, Adam; Miles, Jessica; Ko, Jupil; Curry, Patrick

2017-12-01

  Wet bulb globe temperature (WBGT) is the gold standard for assessing environmental heat stress during physical activity. Many manufacturers of commercially available instruments fail to report WBGT accuracy.   To determine the accuracy of several commercially available WBGT monitors compared with a standardized reference device.   Observational study.   Field test.   Six commercially available WBGT devices.   Data were recorded for 3 sessions (1 in the morning and 2 in the afternoon) at 2-minute intervals for at least 2 hours. Mean absolute error (MAE), root mean square error (RMSE), mean bias error (MBE), and the Pearson correlation coefficient ( r) were calculated to determine instrument performance compared with the reference unit.   The QUESTemp° 34 (MAE = 0.24°C, RMSE = 0.44°C, MBE = -0.64%) and Extech HT30 Heat Stress Wet Bulb Globe Temperature Meter (Extech; MAE = 0.61°C, RMSE = 0.79°C, MBE = 0.44%) demonstrated the least error in relation to the reference standard, whereas the General WBGT8778 Heat Index Checker (General; MAE = 1.18°C, RMSE = 1.34°C, MBE = 4.25%) performed the poorest. The QUESTemp° 34 and Kestrel 4400 Heat Stress Tracker units provided conservative measurements that slightly overestimated the WBGT provided by the reference unit. Finally, instruments using the psychrometric wet bulb temperature (General, REED Heat Index WBGT Meter, and WBGT-103 Heat Stroke Checker) tended to underestimate the WBGT, and the resulting values more frequently fell into WBGT-based activity categories with fewer restrictions as defined by the American College of Sports Medicine.   The QUESTemp° 34, followed by the Extech, had the smallest error compared with the reference unit. Moreover, the QUESTemp° 34, Extech, and Kestrel units appeared to offer conservative yet accurate assessments of the WBGT, potentially minimizing the risk of allowing physical activity to continue in stressful heat environments. Instruments using the psychrometric wet bulb temperature tended to underestimate WBGT under low wind-speed conditions. Accurate WBGT interpretations are important to enable clinicians to guide activities in hot and humid weather conditions.

Assessment of Different Discrete Particle Methods Ability To Predict Gas-Particle Flow in a Small-Scale Fluidized Bed

DOE PAGES

Lu, Liqiang; Gopalan, Balaji; Benyahia, Sofiane

2017-06-21

Several discrete particle methods exist in the open literature to simulate fluidized bed systems, such as discrete element method (DEM), time driven hard sphere (TDHS), coarse-grained particle method (CGPM), coarse grained hard sphere (CGHS), and multi-phase particle-in-cell (MP-PIC). These different approaches usually solve the fluid phase in a Eulerian fixed frame of reference and the particle phase using the Lagrangian method. The first difference between these models lies in tracking either real particles or lumped parcels. The second difference is in the treatment of particle-particle interactions: by calculating collision forces (DEM and CGPM), using momentum conservation laws (TDHS and CGHS),more » or based on particle stress model (MP-PIC). These major model differences lead to a wide range of results accuracy and computation speed. However, these models have never been compared directly using the same experimental dataset. In this research, a small-scale fluidized bed is simulated with these methods using the same open-source code MFIX. The results indicate that modeling the particle-particle collision by TDHS increases the computation speed while maintaining good accuracy. Also, lumping few particles in a parcel increases the computation speed with little loss in accuracy. However, modeling particle-particle interactions with solids stress leads to a big loss in accuracy with a little increase in computation speed. The MP-PIC method predicts an unphysical particle-particle overlap, which results in incorrect voidage distribution and incorrect overall bed hydrodynamics. Based on this study, we recommend using the CGHS method for fluidized bed simulations due to its computational speed that rivals that of MPPIC while maintaining a much better accuracy.« less

Assessment of Different Discrete Particle Methods Ability To Predict Gas-Particle Flow in a Small-Scale Fluidized Bed

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Liqiang; Gopalan, Balaji; Benyahia, Sofiane

Several discrete particle methods exist in the open literature to simulate fluidized bed systems, such as discrete element method (DEM), time driven hard sphere (TDHS), coarse-grained particle method (CGPM), coarse grained hard sphere (CGHS), and multi-phase particle-in-cell (MP-PIC). These different approaches usually solve the fluid phase in a Eulerian fixed frame of reference and the particle phase using the Lagrangian method. The first difference between these models lies in tracking either real particles or lumped parcels. The second difference is in the treatment of particle-particle interactions: by calculating collision forces (DEM and CGPM), using momentum conservation laws (TDHS and CGHS),more » or based on particle stress model (MP-PIC). These major model differences lead to a wide range of results accuracy and computation speed. However, these models have never been compared directly using the same experimental dataset. In this research, a small-scale fluidized bed is simulated with these methods using the same open-source code MFIX. The results indicate that modeling the particle-particle collision by TDHS increases the computation speed while maintaining good accuracy. Also, lumping few particles in a parcel increases the computation speed with little loss in accuracy. However, modeling particle-particle interactions with solids stress leads to a big loss in accuracy with a little increase in computation speed. The MP-PIC method predicts an unphysical particle-particle overlap, which results in incorrect voidage distribution and incorrect overall bed hydrodynamics. Based on this study, we recommend using the CGHS method for fluidized bed simulations due to its computational speed that rivals that of MPPIC while maintaining a much better accuracy.« less

[Falling as a method of suicide--psychodynamic aspects].

PubMed

Haenel, T

1985-01-01

After some reflections upon the phenomenon of falling/jumping, the fall from a height and its meaning in fairy tales, in literature and in history is discussed. Eight casuistics with fatal and non-fatal issue serve to shed light on the psychodynamics which precipitate such acts. Referring to world-famous buildings such as the Eiffel Tower in Paris or the Golden Gate Bridge in San Francisco, the fact is stressed that many suicidal persons are attracted by these constructions and choose the place for their suicidal act accordingly. The possibilities of suicide prevention and the treatment of patients who have survived their attempt are presented.

High-intensity, occupation-specific training in a series of firefighters during phase II cardiac rehabilitation.

PubMed

Adams, Jenny; Cheng, Dunlei; Berbarie, Rafic F

2013-04-01

Six male firefighters who were referred to phase II cardiac rehabilitation after coronary revascularization participated in a specialized regimen of high-intensity, occupation-specific training (HIOST) that simulated firefighting tasks. During each session, the electrocardiogram, heart rate, and blood pressure were monitored, and the patients were observed for adverse symptoms. No patient had to discontinue HIOST because of adverse arrhythmias or symptoms. For physicians who must make decisions about return to work, the information collected over multiple HIOST sessions might be more thorough and conclusive than the information gained during a single treadmill exercise stress test (the recommended evaluation method).

[Dispute over the multiple personality disorder: theoretical or practical dilemma?].

PubMed

Stankiewicz, Sylwia; Golczyńska, Maria

2006-01-01

Dissociative identity disorder (DID) could also be referred to as multiple personality disorder (MPD). Due to rare occurrence and difficulty in its' identification it is infrequently diagnosed in Poland. The indicated disorder has been portrayed by the authors throughout the historical context, referring to initial 18th century's references concerning dissociation. A typical dissociatively disordered person has been characterized along with his individual personality categories such as: original personality, altered personality, host and personality fragment. Moreover various diagnosis criterions of DID have been introduced. DID has also been differentiated with other disorders: PTSD (post-traumatic stress disorder) and BPD (borderline personality disorder). A hypothesis has been set up, stating that DID is directly correlated with the trauma experienced during childhood, while PTSD is linked with traumatic lived-through events in the later period of ones' life. The most contemporary and frequently used research tools for DID have been indicated: dissociative experience scale (DES) and somatoform dissociation questionnaire (SDQ-20). Based upon the known literature, the authors have presented treatment methods such as hypnotherapy and recorded therapy sessions. It is the view of the authors that the switching in dissociative identity disorder is of adaptive character (it occurrs depending upon adaptive needs).

The Reference Genome of the Halophytic Plant Eutrema salsugineum

PubMed Central

Yang, Ruolin; Jarvis, David E.; Chen, Hao; Beilstein, Mark A.; Grimwood, Jane; Jenkins, Jerry; Shu, ShengQiang; Prochnik, Simon; Xin, Mingming; Ma, Chuang; Schmutz, Jeremy; Wing, Rod A.; Mitchell-Olds, Thomas; Schumaker, Karen S.; Wang, Xiangfeng

2013-01-01

Halophytes are plants that can naturally tolerate high concentrations of salt in the soil, and their tolerance to salt stress may occur through various evolutionary and molecular mechanisms. Eutrema salsugineum is a halophytic species in the Brassicaceae that can naturally tolerate multiple types of abiotic stresses that typically limit crop productivity, including extreme salinity and cold. It has been widely used as a laboratorial model for stress biology research in plants. Here, we present the reference genome sequence (241 Mb) of E. salsugineum at 8× coverage sequenced using the traditional Sanger sequencing-based approach with comparison to its close relative Arabidopsis thaliana. The E. salsugineum genome contains 26,531 protein-coding genes and 51.4% of its genome is composed of repetitive sequences that mostly reside in pericentromeric regions. Comparative analyses of the genome structures, protein-coding genes, microRNAs, stress-related pathways, and estimated translation efficiency of proteins between E. salsugineum and A. thaliana suggest that halophyte adaptation to environmental stresses may occur via a global network adjustment of multiple regulatory mechanisms. The E. salsugineum genome provides a resource to identify naturally occurring genetic alterations contributing to the adaptation of halophytic plants to salinity and that might be bioengineered in related crop species. PMID:23518688

Reference Genes for Accurate Transcript Normalization in Citrus Genotypes under Different Experimental Conditions

PubMed Central

Mafra, Valéria; Kubo, Karen S.; Alves-Ferreira, Marcio; Ribeiro-Alves, Marcelo; Stuart, Rodrigo M.; Boava, Leonardo P.; Rodrigues, Carolina M.; Machado, Marcos A.

2012-01-01

Real-time reverse transcription PCR (RT-qPCR) has emerged as an accurate and widely used technique for expression profiling of selected genes. However, obtaining reliable measurements depends on the selection of appropriate reference genes for gene expression normalization. The aim of this work was to assess the expression stability of 15 candidate genes to determine which set of reference genes is best suited for transcript normalization in citrus in different tissues and organs and leaves challenged with five pathogens (Alternaria alternata, Phytophthora parasitica, Xylella fastidiosa and Candidatus Liberibacter asiaticus). We tested traditional genes used for transcript normalization in citrus and orthologs of Arabidopsis thaliana genes described as superior reference genes based on transcriptome data. geNorm and NormFinder algorithms were used to find the best reference genes to normalize all samples and conditions tested. Additionally, each biotic stress was individually analyzed by geNorm. In general, FBOX (encoding a member of the F-box family) and GAPC2 (GAPDH) was the most stable candidate gene set assessed under the different conditions and subsets tested, while CYP (cyclophilin), TUB (tubulin) and CtP (cathepsin) were the least stably expressed genes found. Validation of the best suitable reference genes for normalizing the expression level of the WRKY70 transcription factor in leaves infected with Candidatus Liberibacter asiaticus showed that arbitrary use of reference genes without previous testing could lead to misinterpretation of data. Our results revealed FBOX, SAND (a SAND family protein), GAPC2 and UPL7 (ubiquitin protein ligase 7) to be superior reference genes, and we recommend their use in studies of gene expression in citrus species and relatives. This work constitutes the first systematic analysis for the selection of superior reference genes for transcript normalization in different citrus organs and under biotic stress. PMID:22347455

Fatigue life assessment of 316L stainless steel and DIN-1.4914 martensitic steel before and after TEXTOR exposure

NASA Astrophysics Data System (ADS)

Shakib, J. I.; Ullmaier, H.; Little, E. A.; Schmitz, W.; Faulkner, R. G.; Chung, T. E.

1992-09-01

The effects of plasma exposure in the TEXTOR tokomak on elevated temperature fatigue lifetime and failure micromechanisms of 316L austenitic stainless steel and DIN 1.4914 martensitic steel (NET reference heats) have been evaluated. Fatigue tests were carried out in vacuum in the temperature range 150°-450°C and compared with data from reference specimens.Plasma-induced surface modifications lead to significant deterioration in fatigue life of 316L steel, whereas the lifetime of 1.4914 steel is unaffected. Fatigue in the 1.4914 steel is surface-initiated only at high stresses. At low stress amplitudes internal fatigue initiation at inclusions was observed.

Association between psychological status with perceived social support in pregnant women referring to Tabriz health centers.

PubMed

Shafaie, Fahimeh Sehhatie; Mirghafourvand, Mojgan; Rahmati, Mahbubeh; Nouri, Parviz; Bagherinia, Marzieh

2018-06-01

The aim of this study was to determine the relationship between the psychological status of pregnant women with perceived social support. In this cross-sectional study, 372 Iranian women were selected randomly via a two-stage cluster sampling method at the third trimester of pregnancy in healthcare centers of Tabriz-Iran. Data were collected using the socio-demographic characteristics questionnaire, perceived social support (PRQ-85) and the short form of depression, anxiety, and stress (DASS-21). The statistical tests including Spearman's correlation, Mann-Whitney, Kruskal Wallis, and linear regression model were used for data. The mean (SD) score of perceived social support 131.5 (18.9) with a range of 25-175 was achieved. In terms of the scale of mental health, median (25-75 percentile) of the score of anxiety 4.0 (3.0-7.0), depression 1.0 (0.0-6.0), and stress 8.0 (0.6-10.0) was achieved. There was a significant negative correlation between perceived social support with anxiety (r = -.355, p < .001), depression (r = -.541, p < .001), and stress in women (r = -.302, p < .001). The results of this study showed that social support affects the mental state of women in the third trimester of pregnancy and the levels of anxiety, depression, and stress decrease in pregnant women with increasing of social support.

[Effects of seed priming on physiology of seed germination and seeding growth of Marsdenia tenacissima under NaCl stress].

PubMed

Xiao, Xue-feng; Liu, Li; Guo, Qiao-sheng; Li, Chao; Wang, Ping-li; Yang, Sheng-chao; Hang, Yue-yu

2015-01-01

To offer the reference and method for salt damage in the cultivation of Marsdenia tenacissima, the seeds of M. tenacissima collected from Maguan city ( Yunnan province) were taken as the test materials to study the effects of different priming materials on improving germination and growth under high-level salt stress condition. Four different treatments, which were GA3, KNO3-KH2PO4, PEG-6000, NaCl, combined with ANOVA were applied to test the performance of germination energy, germination percentage, germination index, MDA, SOD, and CAT. The results showed that the seed germination was obviously inhibited under salt stress and the soaked seeds with different priming materials could alleviate the damage of salt stress. Under these treatments, the activities of SOD, CAT the content of soluble protein significantly increased. While the content of MDA significantly decreased. The maximum index was obtained when treated with 1.20% KNO3-KH2PO4, the germination percentage increased from 52.67% to 87.33% and the activity of SOD increased from 138.01 to 219.44 respectively. Comparing with the treatment of 1.20% KNO3-KH2PO4, the germination percentage of treating with 300 mg x L(-1) GA3 increased from 52.67% to 80.67%, while the activity of SOD increased from 138.01 to 444.61.

Use of the flat dilatometer (DMT) in landslides

NASA Astrophysics Data System (ADS)

Amoroso, Sara; Monaco, Paola

2016-04-01

During the last decades we have assisted at a considerable shift from laboratory testing to in situ testing to the point that, today, in situ testing often represent the major part of a geotechnical investigation. Recommendations given in recent State-of-the-Art papers indicate that direct-push in situ tests, such as the Seismic Cone Penetration Test (SCPT) and the Seismic Dilatometer Test (SDMT), are fast and very convenient tests for routine site investigations. The aim of this paper is to describe the use of the flat dilatometer test (DMT) in landslide diagnosis and monitoring. In particular, a method is presented for detecting slip surfaces in overconsolidated clay slopes based on the inspection of the profiles of the horizontal stress index KD from DMT, as developed by Totani et al. (1997). In addition, the relaxation of the in situ horizontal stress σh, estimated from DMT, helps to locate a landslide. The paper illustrates by using different examples the capability of SDMT to identify the shear zones left remoulded by the occurrence of a landslide. Keywords: flat dilatometer, horizontal stress index, in situ horizontal stress References Totani G., Calabrese M., Marchetti S., Monaco, P. (1997). Use of in situ flat dilatometer (DMT) for ground characterization in the stability analysis of slopes. Proceeding of 14th International Conference on Soil Mechanics and Foundation Engineering, Hamburg, September 1997, vol. 1, pp. 607-610.

Tear staining in pigs: a potential tool for welfare assessment on commercial farms

USDA-ARS?s Scientific Manuscript database

Tear staining or chromodacryorrhea refers to a dark stain below the inner corner of the eye, caused by porphyrin-pigmented secretion from the Harderian gland. It been shown to be a consistent indicator of stress in rats, and recently it has been shown to correlate with social stress and a barren env...

When Experience Counts: The Effects of Experiential and Structural Similarity on Patterns of Support and Interpersonal Stress.

ERIC Educational Resources Information Center

Suitor, J. Jill; And Others

1995-01-01

Draws upon theories of homophily and reference groups to argue that experiential similarity (similar status transition) is more important than structural similarity (age, gender, and marital status) in determining sources of emotional support and stress following life events. Arguments are supported by longitudinal data on social networks of…

Investigating Teacher Stress when Using Technology

ERIC Educational Resources Information Center

Al-Fudail, Mohammed; Mellar, Harvey

2008-01-01

In this study we use a model which we refer to as the "teacher-technology environment interaction model" to explore the issue of the stress experienced by teachers whilst using ICT in the classroom. The methodology we used involved a comparison of three datasets obtained from: direct observation and video-logging of the teachers in the classroom;…

Geotechnical Investigations

DTIC Science & Technology

2001-01-01

and erosion of embankment or foundation materials and hydraulic fracturing while using water. The new ER establishes a policy for drilling in earth...Table 5-4 In Situ Tests to Determine Stress Conditions Bibliographic Test Soils Rocks Reference Remarks Hydraulic fracturing X...Leach (1977) Only for normally consolidated or slightly Mitchell, Guzikowski, consolidated soils and Villet (1978) Hydraulic fracturing X RTH 344 Stress

Post-traumatic stress disorder in veterans.

PubMed

Charles, Janice; Harrison, Christopher; Britt, Helena

2014-11-01

Over 2000 general practice encounters per year (2.3%) in BEACH are with repatriation health card holders, referred to here as veterans. The patients are veterans of Australia's defence force or war widows, widowers or dependent children. We compared the rate at which post-traumatic stress disorder (PTSD) was managed among veterans and non-veterans from April 2009 to June 2014.

Negative First-Term Outcomes Associated with Lower Extremity Injury During Recruit Training Among Female Marine Corps Graduates

DTIC Science & Technology

2007-01-01

regarding stress fractures and retention, and no sex -specific practices. Current medical practice at MCRD Parris Island is to recommend separation for...2.5 Lower Extremity Injury Stress Fracture IU Reference B Failed to completed H No promotlon# • No reenllst# | Fig. 1. AORs for first- tenn outcome

A new scoring method for evaluating the performance of earthquake forecasts and predictions

NASA Astrophysics Data System (ADS)

Zhuang, J.

2009-12-01

This study presents a new method, namely the gambling score, for scoring the performance of earthquake forecasts or predictions. Unlike most other scoring procedures that require a regular scheme of forecast and treat each earthquake equally, regardless their magnitude, this new scoring method compensates the risk that the forecaster has taken. A fair scoring scheme should reward the success in a way that is compatible with the risk taken. Suppose that we have the reference model, usually the Poisson model for usual cases or Omori-Utsu formula for the case of forecasting aftershocks, which gives probability p0 that at least 1 event occurs in a given space-time-magnitude window. The forecaster, similar to a gambler, who starts with a certain number of reputation points, bets 1 reputation point on ``Yes'' or ``No'' according to his forecast, or bets nothing if he performs a NA-prediction. If the forecaster bets 1 reputation point of his reputations on ``Yes" and loses, the number of his reputation points is reduced by 1; if his forecasts is successful, he should be rewarded (1-p0)/p0 reputation points. The quantity (1-p0)/p0 is the return (reward/bet) ratio for bets on ``Yes''. In this way, if the reference model is correct, the expected return that he gains from this bet is 0. This rule also applies to probability forecasts. Suppose that p is the occurrence probability of an earthquake given by the forecaster. We can regard the forecaster as splitting 1 reputation point by betting p on ``Yes'' and 1-p on ``No''. In this way, the forecaster's expected pay-off based on the reference model is still 0. From the viewpoints of both the reference model and the forecaster, the rule for rewarding and punishment is fair. This method is also extended to the continuous case of point process models, where the reputation points bet by the forecaster become a continuous mass on the space-time-magnitude range of interest. We also calculate the upper bound of the gambling score when the true model is a renewal process, the stress release model or the ETAS model and when the reference model is the Poisson model.

Elastic interactions between two-dimensional geometric defects

NASA Astrophysics Data System (ADS)

Moshe, Michael; Sharon, Eran; Kupferman, Raz

2015-12-01

In this paper, we introduce a methodology applicable to a wide range of localized two-dimensional sources of stress. This methodology is based on a geometric formulation of elasticity. Localized sources of stress are viewed as singular defects—point charges of the curvature associated with a reference metric. The stress field in the presence of defects can be solved using a scalar stress function that generalizes the classical Airy stress function to the case of materials with nontrivial geometry. This approach allows the calculation of interaction energies between various types of defects. We apply our methodology to two physical systems: shear-induced failure of amorphous materials and the mechanical interaction between contracting cells.

A scheme for computing surface layer turbulent fluxes from mean flow surface observations

NASA Technical Reports Server (NTRS)

Hoffert, M. I.; Storch, J.

1978-01-01

A physical model and computational scheme are developed for generating turbulent surface stress, sensible heat flux and humidity flux from mean velocity, temperature and humidity at some fixed height in the atmospheric surface layer, where conditions at this reference level are presumed known from observations or the evolving state of a numerical atmospheric circulation model. The method is based on coupling the Monin-Obukov surface layer similarity profiles which include buoyant stability effects on mean velocity, temperature and humidity to a force-restore formulation for the evolution of surface soil temperature to yield the local values of shear stress, heat flux and surface temperature. A self-contained formulation is presented including parameterizations for solar and infrared radiant fluxes at the surface. Additional parameters needed to implement the scheme are the thermal heat capacity of the soil per unit surface area, surface aerodynamic roughness, latitude, solar declination, surface albedo, surface emissivity and atmospheric transmissivity to solar radiation.

Isolation of Polysomal RNA for Analyzing Stress-Responsive Genes Regulated at the Translational Level in Plants.

PubMed

Li, Yong-Fang; Mahalingam, Ramamurthy; Sunkar, Ramanjulu

2017-01-01

Alteration of gene expression is an essential mechanism, which allows plants to respond and adapt to adverse environmental conditions. Transcriptome and proteome analyses in plants exposed to abiotic stresses revealed that protein levels are not correlated with the changes in corresponding mRNAs, indicating regulation at translational level is another major regulator for gene expression. Analysis of translatome, which refers to all mRNAs associated with ribosomes, thus has the potential to bridge the gap between transcriptome and proteome. Polysomal RNA profiling and recently developed ribosome profiling (Ribo-seq) are two main methods for translatome analysis at global level. Here, we describe the classical procedure for polysomal RNA isolation by sucrose gradient ultracentrifugation followed by highthroughput RNA-seq to identify genes regulated at translational level. Polysomal RNA can be further used for a variety of downstream applications including Northern blot analysis, qRT-PCR, RNase protection assay, and microarray-based gene expression profiling.

Effects of Teacher Self-Disclosure on Student Learning and Perceptions of Teacher.

ERIC Educational Resources Information Center

McCarthy, Patricia R.; Schmeck, Ronald R.

Researchers in the area of human learning and memory have stressed the need for systematic studies of the factors involved in information processing and their effects on the retention and recall of the information processed. One such important factor may be self-reference. A lecturer may stimulate self-reference in students through…

The Processing Cost of Reference Set Computation: Acquisition of Stress Shift and Focus

ERIC Educational Resources Information Center

Reinhart, Tanya

2004-01-01

Reference set computation -- the construction of a (global) comparison set to determine whether a given derivation is appropriate in context -- comes with a processing cost. I argue that this cost is directly visible at the acquisition stage: In those linguistic areas in which it has been independently established that such computation is indeed…

Prevalence of Trauma, PTSD, and Dissociation in Court-Referred Adolescents

ERIC Educational Resources Information Center

Brosky, Beverly A.; Lally, Stephen J.

2004-01-01

This study examines the prevalence of trauma, posttraumatic stress disorder (PTSD), and dissociative symptoms in adolescents. The sample consisted of 76 females and 76 males, between the ages of 12 and 18, referred to the Child Guidance Clinic of the Superior Court of the District of Columbia for a psychological evaluation. Two sets of analyses…

Observed Interactions Indicate Protective Effects of Relationships with Parents for Referred Adolescents

ERIC Educational Resources Information Center

Willemen, Agnes M.; Schuengel, Carlo; Koot, Hans M.

2011-01-01

This study examined whether the quality of parent-adolescent interactions moderate the association between stressful life events and internalizing and externalizing problems in referred adolescents (N = 101, M age 13.41 years, SD = 1.81). Adolescents and their parents reported on psychological problems at the time of referral and 4 years later. At…

The Best of the Recent Literature Focusing on the User

ERIC Educational Resources Information Center

Voeller, Stacy L.

2008-01-01

The author's focus for this column within the large universe of the public services literature is on articles which stress what is best for the user. That may mean finding out why faculty use or do not use the physical library, considering the elimination of the reference desk, beginning or enhancing a library's virtual reference services, or…

Constitutive Equations: Plastic and Viscoelastic Properties. (Latest citations from the Aerospace Database)

NASA Technical Reports Server (NTRS)

1997-01-01

The bibliography contains citations concerning analytical techniques using constitutive equations, applied to materials under stress. The properties explored with these techniques include viscoelasticity, thermoelasticity, and plasticity. While many of the references are general as to material type, most refer to specific metals or composites, or to specific shapes, such as flat plate or spherical vessels.

The influence of music and stress on musicians' hearing

NASA Astrophysics Data System (ADS)

Kähäri, Kim; Zachau, Gunilla; Eklöf, Mats; Möller, Claes

2004-10-01

Hearing and hearing disorders among classical and rock/jazz musicians was investigated. Pure tone audiometry was done in 140 classical and 139 rock/jazz musicians. The rock/jazz musicians answered a questionnaire concerning hearing disorders and psychosocial exposure. All results were compared to age appropriate reference materials. Hearing thresholds showed a notch configuration in both classical and rock/jazz musicians indicating the inclusion of high sound levels but an overall well-preserved hearing thresholds. Female musicians had significantly better hearing thresholds in the high-frequency area than males. Rock/jazz musicians showed slight worse hearing thresholds as compared to classical musicians. When assessing hearing disorders, a large number of rock/jazz musicians suffered from different hearing disorders (74%). Hearing loss, tinnitus and hyperacusis were the most common disorders and were significantly more frequent in comparison with different reference populations. Among classical musicians, no extended negative progress of the pure tone hearing threshold values was found in spite of the continued 16 years of musical noise exposure. In rock/jazz musicians, there was no relationships between psychosocial factors at work and hearing disorders. The rock/jazz musicians reported low stress and high degree of energy. On the average, the rock/jazz musicians reported higher control, lower stress and higher energy than a reference material of white-collar workers.

Determination of internal controls for quantitative gene expression of Isochrysis zhangjiangensis at nitrogen stress condition

NASA Astrophysics Data System (ADS)

Wu, Shuang; Zhou, Jiannan; Cao, Xupeng; Xue, Song

2016-02-01

Isochrysis zhangjiangensis is a potential marine microalga for biodiesel production, which accumulates lipid under nitrogen limitation conditions, but the mechanism on molecular level is veiled. Quantitative real-time polymerase chain reaction (qPCR) provides the possibility to investigate the gene expression levels, and a valid reference for data normalization is an essential prerequisite for firing up the analysis. In this study, five housekeeping genes, actin (ACT), α-tubulin (TUA), ß-tubulin (TUB), ubiquitin (UBI), 18S rRNA (18S) and one target gene, diacylglycerol acyltransferase (DGAT), were used for determining the reference. By analyzing the stabilities based on calculation of the stability index and on operating the two types of software, geNorm and bestkeeper, it showed that the reference genes widely used in higher plant and microalgae, such as UBI, TUA and 18S, were not the most stable ones in nitrogen-stressed I. zhangjiangensis, and thus are not suitable for exploring the mRNA expression levels under these experimental conditions. Our results show that ACT together with TUB is the most feasible internal control for investigating gene expression under nitrogen-stressed conditions. Our findings will contribute not only to future qPCR studies of I. zhangjiangensis, but also to verification of comparative transcriptomics studies of the microalgae under similar conditions.

Residual stress evaluation by Barkhausen signals with a magnetic field sensor for high efficiency electrical motors

NASA Astrophysics Data System (ADS)

Tsuchida, Yuji; Enokizono, Masato

2018-04-01

The iron loss of industrial motors increases by residual stress during manufacturing processes. It is very important to make clear the distribution of the residual stress in the motor cores to reduce the iron loss in the motors. Barkhausen signals which occur on electrical steel sheets can be used for the evaluation of the residual stress because they are very sensitive to the material properties. Generally, a B-sensor is used to measure Barkhausen signals, however, we developed a new H-sensor to measure them and applied it into the stress evaluation. It is supposed that the Barkhausen signals by using a H-sensor can be much effective to the residual stress on the electrical steel sheets by referring our results regarding to the stress evaluations. We evaluated the tensile stress of the electrical steel sheets by measuring Barkhausen signals by using our developed H-sensor for high efficiency electrical motors.

Groundwater withdrawal in the Central Valley, California: implications for San Andreas Fault stressing and lithosphere rheology

NASA Astrophysics Data System (ADS)

Lundgren, P.; Liu, Z.; Ali, S. T.; Farr, T.; Faunt, C. C.

2016-12-01

Anthropogenic perturbations to crustal loading due to groundwater pumping are increasingly recognized as causing changes in nearby fault stresses. We present preliminary analysis of crustal unloading in the Central Valley (CV), California, for the period 2006-2010 to infer Coulomb stress changes on the central San Andreas Fault (CSAF), lithospheric rheology, and system memory due to more than a century of groundwater withdrawal in the southern CV. We use data-driven unloading estimates to drive three-dimensional (3-D) finite element method models and compare model vertical surface deformation rates with observed GPS uplift rates outside the CV. Groundwater level changes are observed through well water elevation changes and through the resultant surface deformation (subsidence) by interferometric synthetic aperture radar (InSAR) and through broader scale changes in gravity from the GRACE satellite time variable gravity data [Famiglietti et al., 2011] that constrain the overall water volume changes. Combining InSAR with well-water data we are able to estimate the aquifer skeletal elastic and inelastic response and through a linear inversion derive the water volume (load) changes across the Central Valley and compare them with GRACE-inferred groundwater changes. Preliminary 3-D finite element method modeling that considers elastic and viscosity structure in the lithosphere gives three interesting results: 1) elastic models poorly fit the uplift rates near the SAF; 2) viscoelastic models that simulate different unloading histories show the past history of groundwater unloading has significant residual uplift rates and fault stress changes; 3) Coulomb stress change varies from inhibited on the locked (Carrizo) section to promoted on the creeping section of the SAF north of Parkfield. Thus, 3D models that account for lithosphere rheology, loading history viscous relaxation, have significant implications for longer-term time-dependent deformation, stress perturbation, and earthquake hazard on the nearby faults. Reference: Famiglietti, J. S., M. Lo, S. L. Ho, J. Bethune, K. J. Anderson, T. H. Syed, S. C. Swenson, C. R. de Linage, and M. Rodell, 2011, Satellites measure recent rates of groundwater depletion in California's Central Valley, Geophys. Res. Lett., 38, L03403, doi:10.1029/2010GL046442.

Evidence for the Stepwise Stress Model: Gambusia holbrooki and Daphnia magna under acid mine drainage and acidified reference water stress.

PubMed

Gerhardt, Almut; Janssens de Bisthoven, Luc; Soares, Amadeu M V

2005-06-01

The Stepwise Stress Model (SSM) states that a cascade of regulative behavioral responses with different intrinsic sensitivities and threshold values offers increased behavioral plasticity and thus a wider range of tolerance for environmental changes or pollutant exposures. We tested the SSM with a widely introduced fish Gambusia holbrooki (Girard) (Pisces, Poeciliidae) and the standard laboratory test species Daphnia magna Straus (Crustacea, Daphniidae). The stress was simulated by short-term exposure to acid mine drainage (AMD) and to acidified reference water (ACID). Recording of behavioral responses with the multispecies freshwater biomonitor (MFB) generated continuous time-dependent dose-response data that were modeled in three-dimensional (3D) surface plots. Both the pH-dependent mortalities and the strong linear correlations between pH and aqueous metals confirmed the toxicity of the AMD and ACID gradients, respectively, for fish and Daphnia, the latter being more sensitive. AMD stress at pH < or = 5.5 amplified circadian rhythmicity in both species, while ACID stress did so only in G. holbrooki. A behavioral stepwise stress response was found in both species: D. magna decreased locomotion and ventilation (first step) (AMD, ACID), followed by increased ventilation (second step) (AMD). G. holbrooki decreased locomotion (first step) (AMD, ACID) and increased ventilation at intermediate pH levels (second step) (AMD). Both species, although from different taxonomic groups and feeding habits, followed the SSM, which might be expanded to a general concept for describing the behavioral responses of aquatic organims to pollution. Stepwise stress responses might be applied in online biomonitors to provide more sensitive and graduated alarm settings, hence optimizing the "early warning" detection of pollution waves.

Differential Gene Expression Reveals Candidate Genes for Drought Stress Response in Abies alba (Pinaceae)

PubMed Central

Ziegenhagen, Birgit; Liepelt, Sascha

2015-01-01

Increasing drought periods as a result of global climate change pose a threat to many tree species by possibly outpacing their adaptive capabilities. Revealing the genetic basis of drought stress response is therefore implemental for future conservation strategies and risk assessment. Access to informative genomic regions is however challenging, especially for conifers, partially due to their large genomes, which puts constraints on the feasibility of whole genome scans. Candidate genes offer a valuable tool to reduce the complexity of the analysis and the amount of sequencing work and costs. For this study we combined an improved drought stress phenotyping of needles via a novel terahertz water monitoring technique with Massive Analysis of cDNA Ends to identify candidate genes for drought stress response in European silver fir (Abies alba Mill.). A pooled cDNA library was constructed from the cotyledons of six drought stressed and six well-watered silver fir seedlings, respectively. Differential expression analyses of these libraries revealed 296 candidate genes for drought stress response in silver fir (247 up- and 49 down-regulated) of which a subset was validated by RT-qPCR of the twelve individual cotyledons. A majority of these genes code for currently uncharacterized proteins and hint on new genomic resources to be explored in conifers. Furthermore, we could show that some traditional reference genes from model plant species (GAPDH and eIF4A2) are not suitable for differential analysis and we propose a new reference gene, TPC1, for drought stress expression profiling in needles of conifer seedlings. PMID:25924061

Medial tibial stress syndrome: evidence-based prevention.

PubMed

Craig, Debbie I

2008-01-01

Thacker SB, Gilchrist J, Stroup DF, Kimsey CD. The prevention of shin splints in sports: a systematic review of literature. Med Sci Sports Exerc. 2002;34(1):32-40. Among physically active individuals, which medial tibial stress syndrome (MTSS) prevention methods are most effective to decrease injury rates? Studies were identified by searching MEDLINE (1966-2000), Current Contents (1996-2000), Biomedical Collection (1993-1999), and Dissertation Abstracts. Reference lists of identified studies were searched manually until no further studies were identified. Experts in the field were contacted, including first authors of randomized controlled trials addressing prevention of MTSS. The Cochrane Collaboration (early stage of Cochrane Database of Systematic Reviews) was contacted. Inclusion criteria included randomized controlled trials or clinical trials comparing different MTSS prevention methods with control groups. Excluded were studies that did not provide primary research data or that addressed treatment and rehabilitation rather than prevention of incident MTSS. A total of 199 citations were identified. Of these, 4 studies compared prevention methods for MTSS. Three reviewers independently scored the 4 studies. Reviewers were blinded to the authors' names and affiliations but not the results. Each study was evaluated independently for methodologic quality using a 100-point checklist. Final scores were averages of the 3 reviewers' scores. Prevention methods studied were shock-absorbent insoles, foam heel pads, Achilles tendon stretching, footwear, and graduated running programs. No statistically significant results were noted for any of the prevention methods. Median quality scores ranged from 29 to 47, revealing flaws in design, control for bias, and statistical methods. No current evidence supports any single prevention method for MTSS. The most promising outcomes support the use of shock-absorbing insoles. Well-designed and controlled trials are critically needed to decrease the incidence of this common injury.

A brief review and clinical application of heart rate variability biofeedback in sports, exercise, and rehabilitation medicine.

PubMed

Prinsloo, Gabriell E; Rauch, H G Laurie; Derman, Wayne E

2014-05-01

An important component of the effective management of chronic noncommunicable disease is the assessment and management of psychosocial stress. The measurement and modulation of heart rate variability (HRV) may be valuable in this regard. To describe the measurement and physiological control of HRV; to describe the impact of psychosocial stress on cardiovascular disease, metabolic syndrome, and chronic respiratory disease, and the relationship between these diseases and changes in HRV; and to describe the influence of biofeedback and exercise on HRV and the use of HRV biofeedback in the management of chronic disease. The PubMed, Medline, and Embase databases were searched (up to August 2013). Additional articles were obtained from the reference lists of relevant articles and reviews. Articles were individually selected for further review based on the quality and focus of the study, and the population studied. Heart rate variability is reduced in stress and in many chronic diseases, and may even predict the development and prognosis of some diseases. Heart rate variability can be increased with both exercise and biofeedback. Although the research on the effect of exercise is conflicting, there is evidence that aerobic training may increase HRV and cardiac vagal tone both in healthy individuals and in patients with disease. Heart rate variability biofeedback is also an effective method of increasing HRV and cardiac vagal tone, and has been shown to decrease stress and reduce the morbidity and mortality of disease. The assessment and management of psychosocial stress is a challenging but important component of effective comprehensive lifestyle interventions for the management of noncommunicable disease. It is, therefore, important for the sports and exercise physician to have an understanding of the therapeutic use of HRV modulation, both in the reduction of stress and in the management of chronic disease.

Heavy metal-induced stress in rice crops detected using multi-temporal Sentinel-2 satellite images.

PubMed

Liu, Meiling; Wang, Tiejun; Skidmore, Andrew K; Liu, Xiangnan

2018-05-05

Regional-level information on heavy metal pollution in agro-ecosystems is essential for food security because excessive levels of heavy metals in crops may pose risks to humans. However, collecting this information over large areas is inherently costly. This paper investigates the possibility of applying multi-temporal Sentinel-2 satellite images to detect heavy metal-induced stress (i.e., Cd stress) in rice crops in four study areas in Zhuzhou City, Hunan Province, China. For this purpose, we compared seven Sentinel-2 images acquired in 2016 and 2017 with in situ measured hyper-spectral data, chlorophyll content, rice leaf area index, and heavy metal concentrations in soil collected from 2014 to 2017. Vegetation indices (VIs) related to red edge bands were referred to as the sensitive indicators for screening stressed rice from unstressed rice. The coefficients of spatio-temporal variation (CSTV) derived from the VIs allowed us to discriminate crops exposed to pollution from heavy metals as well as environmental stressors. The results indicate that (i) the red edge chlorophyll index, the red edge position index, and the normalized difference red edge 2 index derived from multi-temporal Sentinel-2 images were good indicators for screening stressed rice from unstressed rice; (ii) Rice under Cd stress remained stable with lower CSTV values of VIs overall growth stages in the experimental region, whereas rice under other stressors (i.e., pests and disease) showed abrupt changes at some growth stages and presented "hot spots" with greater CSTV values; and (iii) the proposed spatio-temporal anomaly detection method was successful at detecting rice under Cd stress; and CSTVs of rice VIs stabilized regardless of whether they were applied to consecutive growth stages or to two different crop years. This study suggests that regional heavy metal stress may be accurately detected using multi-temporal Sentinel-2 images, using VIs sensitive to the spatio-temporal characteristics of crops. Copyright © 2018 Elsevier B.V. All rights reserved.

The association between workplace smoking bans and self-perceived, work-related stress among smoking workers

PubMed Central

2012-01-01

Background There is substantial empirical evidence on the benefits of smoking bans; however, the unintended consequences of this anti-smoking measure have received little attention. This paper examines whether workplace smoking bans (WSB's) are associated with higher self-perceived, work-related stress among smoking workers. Methods A longitudinal representative sample of 3,237 individuals from the Canadian National Population Health Survey from 2000 to 2008 is used. Work-related stress is derived from a 12-item job questionnaire. Two categories of WSB's, full and partial, are included in the analysis, with no ban being the reference category. Analysis also controls for individual socio-demographic characteristics, health status, provincial and occupational fixed-effects. We use fixed-effects linear regression to control for individual time-invariant confounders, both measured and unmeasured, which can affect the relationship between WSB's and work-related stress. To examine the heterogeneous effects of WSB's, the analysis is stratified by gender and age. We check the robustness of our results by re-estimating the baseline specification with the addition of different control variables and a separate analysis for non-smokers. Results Multivariate analysis reveals a positive and statistically significant association between full (β = 0.75, CI = 0.19-1.32) or partial (β = 0.69, CI = 0.12-1.26) WSB's, and the level of self-perceived, work-related stress among smoking workers compared to those with no WSB. We also find that this association varies by gender and age. In particular, WSB's are significantly associated with higher work stress only for males and young adults (aged 18-40). No statistically significant association is found between WSB's and the level of self-perceived work-related stress among non-smoking workers. Conclusion The results of this study do not imply that WSB's are the main determinant of self-perceived, work-related stress among smokers but provides suggestive evidence that these may be positively related. PMID:22329920

[Investigation on Inhibitory Capacities of Seventeen Herbal Extracts on Oxidative Stress using Ultraviolet and Fluorescence Spectroscopy].

PubMed

Hou, Guang-yue; Zheng, Zhong; Song, Feng-rui; Liu, Zhi-qiang; Zhao, Bing

2015-03-01

Diabetic patients usually suffer from complications and the long-term secondary complications are the main cause of morbidity and mortality. The hyperglycemia-induced oxidative stress is one of the important pathogenesis of diabetic complications, while the oxidative stress is associated with the lipid peroxidation reaction and the formation of advanced glycation end products (AGEs). Our study was focus on the pathogenesis of diabetic complications and based on the oxidative stress reaction. In this research, the oxidative stress inhibiting effects of seventeen herbal extracts were studied based on spectroscopic methodology. The capacities of herbal extracts against the lipid peroxidation reaction of rat liver in vitro were investigated using spectrophotometric method. It showed that the inhibitory activity of Radix Scutellariae and Flos Sophorae Immaturus were better than other herbal extracts. Additionally, the herbal extracts rich in flavonoids, alkaloids and lignanoids showed good inhibitory activities on the lipid peroxidation reaction. On the contrary, the saponin-rich herbal extracts possessed weak inhibitory effects. We applied the BSA/glucose (fructose) system combined with fluorescent spectroscopy to determine the inhibitory activities of herbal extracts in glycation model reactions. The results showed that the AGEs formation inhibitory activity of Flos Sophorae Immaturus, Radix Scutellariae and Rhizoma Anemarrhenae were better than others in the BSA/glucose (fructose) system by fluorescene analysis. The results demonstrated that the herbal extracts rich in flavonoids were found to be more effective than that of those herbal extracts as alkaloids and terpenoids class in inhibiting oxidative stress, while the saponin-rich herbal extracts showed weak inhibitory activities against oxidative stress. The Flos Sophorae Immaturus and Radix Scutellariae extracts had better inhibitory activity to the oxidative stress, so their pharmacological activity could be explored in further investigations. These results demonstrated in this assay could provide a reference for the study of pharmacological activity, and thus lays the foundation for the further study of the application of natural products in the prevention and treatment of diabetic complications.

Role of back stress in the creep behavior of particle strengthened alloys

NASA Technical Reports Server (NTRS)

Purushothaman, S.; Tien, J. K.

1978-01-01

Recent developments in the interpolation of high-temperature steady-state creep results have introduced the concept that the stress dependence of the creep rate should be in terms of the effective stress referred to as the applied stress minus a back stress. This paper reports on back stresses taken from data on a gamma-prime-strengthened wrought nickel-base superalloy, an oxide dispersion-strengthened ODS nickel-base solid solution alloy, and an ODS nickel-base superalloy. The effect of air versus vacuum environments and the effect of dynamic changes in the strengthening microstructures on the magnitude of the back stress are assessed. The role of modulus normalization and the back stress correction in determining the true creep activation energy are examined. It is shown that the high values of the apparent stress exponent 'n' of the steady-state creep equation can be easily explained through a relationship between n, the true stress exponent of steady-state creep, and the stress which when subtracted from the applied stress results in the effective driving stress acting on the mobile dislocations during creep.

The evaluation of maximum horizontal in-situ stress using the wellbore imagers data

NASA Astrophysics Data System (ADS)

Dubinya, N. V.; Ezhov, K. A.

2016-12-01

Well drilling provides a number of possibilities to improve the knowledge of stress state of the upper layers of the Earth crust. The data obtained from drilling, well logging, core experiments and special tests is used to evaluate the principal stresses' directions and magnitudes. Although the values of vertical stress and minimum horizontal stress may be decently estimated, the maximum horizontal stress remains a major problem. In this study a new method to estimate this value is proposed. The suggested approach is based on the concept of hydraulically conductive and non-conductive fractures near a wellbore (Barton, Zoback and Moos, 1995). It was stated that all the fractures which properties may be acquired from well logging data can be divided into two groups regarding hydraulic conductivity. The fracture properties and the in-situ stress state are put in relationship via the Mohr diagram. This approach was later used by Ito and Zoback (2000) to estimate the magnitude of the maximum horizontal stress from the temperature profiles. In the current study ultrasonic and resistivity borehole imaging are used to estimate the magnitude of maximum horizontal stress in rather precise way. After proper interpretation one is able to obtain orientation and hydraulic conductivity for each fracture appeared at the images. If the proper profiles of vertical and minimum horizontal stresses are known all the fractures may be analyzed at the Mohr diagram. Alteration of maximum horizontal stress profile grants an opportunity to adjust it so the conductive fractures at the Mohr diagram fit the data from imagers' interpretation. The precision of the suggested approach was evaluated for several oil production wells in Siberia with decent wellbore stability models. It appeared that the difference between maximum horizontal stress estimated in a suggested approach and the values obtained from drilling reports did not exceed 0.5 MPa. Thus the proposed approach may be used to evaluate the values of maximum horizontal stress using the wellbore imagers' data. References Barton, C.A., Zoback, M.D., Moos, D. Fluid flow along potentially active faults in crystalline rock - Geology, 1995. T. Ito, M. Zoback, Fracture permeability and in situ stress to 7 km depth in the KTB Scientific Drillhole, Geophysical Research Letters, 2000.

Mindfulness-based stress reduction: an intervention to enhance the effectiveness of nurses' coping with work-related stress.

PubMed

Smith, Sarah A

2014-06-01

This critical literature review explored the current state of the science regarding mindfulness-based stress reduction (MBSR) as a potential intervention to improve the ability of nurses to effectively cope with stress. Literature sources include searches from EBSCOhost, Gale PowerSearch, ProQuest, PubMed Medline, Google Scholar, Online Journal of Issues in Nursing, and reference lists from relevant articles. Empirical evidence regarding utilizing MBSR with nurses and other healthcare professionals suggests several positive benefits including decreased stress, burnout, and anxiety; and increased empathy, focus, and mood. Nurse use of MBSR may be a key intervention to help improve nurses' ability to cope with stress and ultimately improve the quality of patient care provided. © 2014 NANDA International, Inc.

Investigating Resulting Residual Stresses during Mechanical Forming Process

NASA Astrophysics Data System (ADS)

Akinlabi, Stephen A.; Fatoba, Olawale S.; Mashinini, Peter M.; Akinlabi, Esther T.

2018-03-01

Most manufacturing processes such as machining, welding, heat treatment, laser forming, laser cladding and, laser metal deposition, etc. are subjected to a form of heat or energy to change the geometrical shape thus changing the inherent engineering and structural properties of the material. These changes often cause the development of locked up stresses referred to as residual stresses as a result of these activities. This study reports on the residual stresses developed due to the mechanical forming process to maintain a suitable structural integrity for the formed components. The result of the analysis through the X-ray diffraction confirmed that residual stresses were induced in the manufactured parts and further revealed that residual stresses were compressive in nature as found in the parent material but with values less than the parent material.

Improved ultrasonic standard reference blocks

NASA Technical Reports Server (NTRS)

Eitzen, D. G.

1975-01-01

A program to improve the quality, reproducibility and reliability of nondestructive testing through the development of improved ASTM-type ultrasonic reference standards is described. Reference blocks of aluminum, steel, and titanium alloys were considered. Equipment representing the state-of-the-art in laboratory and field ultrasonic equipment was obtained and evaluated. Some RF and spectral data on ten sets of ultrasonic reference blocks were taken as part of a task to quantify the variability in response from nominally identical blocks. Techniques for residual stress, preferred orientation, and microstructural measurements were refined and are applied to a reference block rejected by the manufacturer during fabrication in order to evaluate the effect of metallurgical condition on block response.

Implementing psychophysiology in clinical assessments of adolescent social anxiety: use of rater judgments based on graphical representations of psychophysiology.

PubMed

De Los Reyes, Andres; Augenstein, Tara M; Aldao, Amelia; Thomas, Sarah A; Daruwala, Samantha; Kline, Kathryn; Regan, Timothy

2015-01-01

Social stressor tasks induce adolescents' social distress as indexed by low-cost psychophysiological methods. Unknown is how to incorporate these methods within clinical assessments. Having assessors judge graphical depictions of psychophysiological data may facilitate detections of data patterns that may be difficult to identify using judgments about numerical depictions of psychophysiological data. Specifically, the Chernoff Face method involves graphically representing data using features on the human face (eyes, nose, mouth, and face shape). This method capitalizes on humans' abilities to discern subtle variations in facial features. Using adolescent heart rate norms and Chernoff Faces, we illustrated a method for implementing psychophysiology within clinical assessments of adolescent social anxiety. Twenty-two clinic-referred adolescents completed a social anxiety self-report and provided psychophysiological data using wireless heart rate monitors during a social stressor task. We graphically represented participants' psychophysiological data and normative adolescent heart rates. For each participant, two undergraduate coders made comparative judgments between the dimensions (eyes, nose, mouth, and face shape) of two Chernoff Faces. One Chernoff Face represented a participant's heart rate within a context (baseline, speech preparation, or speech-giving). The second Chernoff Face represented normative heart rate data matched to the participant's age. Using Chernoff Faces, coders reliably and accurately identified contextual variation in participants' heart rate responses to social stress. Further, adolescents' self-reported social anxiety symptoms predicted Chernoff Face judgments, and judgments could be differentiated by social stress context. Our findings have important implications for implementing psychophysiology within clinical assessments of adolescent social anxiety.

Piezoelectrically forced vibrations of electroded doubly rotated quartz plates by state space method

NASA Technical Reports Server (NTRS)

Chander, R.

1990-01-01

The purpose of this investigation is to develop an analytical method to study the vibration characteristics of piezoelectrically forced quartz plates. The procedure can be summarized as follows. The three dimensional governing equations of piezoelectricity, the constitutive equations and the strain-displacement relationships are used in deriving the final equations. For this purpose, a state vector consisting of stresses and displacements are chosen and the above equations are manipulated to obtain the projection of the derivative of the state vector with respect to the thickness coordinate on to the state vector itself. The solution to the state vector at any plane is then easily obtained in a closed form in terms of the state vector quantities at a reference plane. To simplify the analysis, simple thickness mode and plane strain approximations are used.

DIFFERENTIAL DIAGNOSTIC PROCESS AND CLINICAL DECISION MAKING IN A YOUNG ADULT FEMALE WITH LATERAL HIP PAIN: A CASE REPORT.

PubMed

Livingston, Jennifer I; Deprey, Sara M; Hensley, Craig P

2015-10-01

differential diagnosis and clinical decision making. Young adults with lateral hip pain are often referred to physical therapy (PT). A thorough examination is required to obtain a diagnosis and guide management. The purpose of this case report is to describe the physical therapist's differential diagnostic process and clinical decision making for a subject with the referring diagnosis of trochanteric bursitis. A 29-year-old female presented to PT with limited sitting and running tolerance secondary to right lateral hip pain. Her symptoms began three months prior when she abruptly changed her running intensity and frequency of weight bearing activities, including running and low impact plyometrics for the lower extremity. Physical examination revealed a positive Trendelenburg sign, manual muscle test that was weak and painless of the right hip abductors, and pain elicited when performing a vertical hop on a concrete surface (+single leg hop test), but pain-free when performing the same single leg hop on a foam surface. Examination findings warranted discussion with the referring physician for further diagnostic imaging. Magnetic resonance imaging revealed a focus of edema in the posterior acetabulum, suspicious for an acetabular stress fracture. The subject was subsequently diagnosed with an acetabular stress fracture and restricted from running and plyometrics for four weeks. Thorough examination and appropriate clinical decision making by the physical therapist at the initial examination led to the diagnosis of an acetabular stress fracture in this subject. Clinicians must be aware of symptoms and signs which place the subject at risk for stress fracture for timely referral and management. 4.

76 FR 12896 - References to Credit Ratings in Certain Investment Company Act Rules and Forms

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-09

... several releases that the Securities and Exchange Commission (``Commission'') will be considering relating... Conditional Demand Feature 3. Monitoring Minimal Credit Risks 4. Stress Testing B. Form N-MFP C. Rule 5b-3 D... events; and stress testing.\\20\\ The proposed amendments to rule 2a-7, which are similar to those we...

Effects of Childhood Stress Can Accumulate in the Body. Science Brief

ERIC Educational Resources Information Center

National Scientific Council on the Developing Child, 2008

2008-01-01

This brief presents the findings of a study that examined the effects of "allostatic load" on children in poverty at age 9 and 13. "Allostatic load" refers to the measurement of the cumulative wear and tear on the body that results from experiencing stress. Research shows that high allostatic load in childhood is associated with long-term…

A Multimedia over IP Integrated System for Military Communications

DTIC Science & Technology

2006-12-01

stressed how communications requirements raise dramatically now, either in quantity either in quality, in order to effectively improve sensor...admission control based on network resources availability. We will stress the role of SIT and the characteristic of the Gatekeeper to act as the...considered: • Telecommuting - Telecommuting is a broad term referring to corporate employees who interact electronically with corporate resources

Psychosocial workload and stress in the workers’ representative

PubMed Central

2012-01-01

Background Using a data set of works councils of trade union IG Metal, this paper investigates psychosocial stress and strain on this specific group in comparison to employees working in administration in general (leadership and non-leadership-role) and a national reference value. Methods For assessing psychosocial work factors on works councils within the sector represented by the trade union IG Metal in Germany, a research by using the German standard version of COPSOQ (Copenhagen Psychosocial Questionnaire) was performed. The instrument includes 87 single items forming 25 aspects of strain and stress. Results from the study group of works councils were compared to those from employees working in administration and to the general population mean (COPSOQ database). Statistical analysis included t-tests, analysis of variance and multiple comparisons of means. To be significant in terms of statistics, p<0.05 (two-tailed) and a minimum deviation of 5 or more points between groups′ mean values identify the relevant values. Results All in all, 309 works councils from a national survey of the German chemical and metalworking industries took part in the study. 113 were full-time works council members (exempted from the duty to perform their regular work), 196 were voluntary members (acting as employee representatives on an honorary basis alongside their normal duties). Comparison between works councils and employees working in administration (leadership roles (N=1810) and non-leadership roles (N=2970)) and for employees in general (N=35.000) showed unfavourable values for works councils for most scales. Significantly higher values indicating higher strain and stress were found for the scales: emotional demands, work-privacy conflict, role conflicts, mobbing, cognitive stress symptoms and burnout. Unfavourable results were obtained for the aspects: quality of leadership, social support, sense of community and general health. Favourable findings were found on the scales: influence at work, quantity of social relations and the partly positive values for quantitative demands and commitment to the workplace. Conclusion Compared to the reference groups, works council members perceive the psychosocial demands of working life as more exhausting for the majority of aspects. This allows several conclusions. One reason may be the extended tasks employee representatives face, an other may be that the education of most works council members does not seem appropriate to the high demands of their managerial and executive tasks. PMID:23101876

Application of the Low-dose One-stop-shop Cardiac CT Protocol with Third-generation Dual-source CT.

PubMed

Lin, Lu; Wang, Yining; Yi, Yan; Cao, Jian; Kong, Lingyan; Qian, Hao; Zhang, Hongzhi; Wu, Wei; Wang, Yun; Jin, Zhengyu

2017-02-20

Objective To evaluate the feasibility of a low-dose one-stop-shop cardiac CT imaging protocol with third-generation dual-source CT (DSCT). Methods Totally 23 coronary artery disease (CAD) patients were prospectively enrolled between March to September in 2016. All patients underwent an ATP stress dynamic myocardial perfusion imaging (MPI) (data acquired prospectively ECG-triggered during end systole by table shuttle mode in 32 seconds) at 70 kV combined with prospectively ECG-triggered high-pitch coronary artery angiography (CCTA) on a third-generation DSCT system. Myocardial blood flow (MBF) was quantified and compared between perfusion normal and abnormal myocardial segments based on AHA-17-segment model. CCTA images were evaluated qualitatively based on SCCT-18-segment model and the effective dose(ED) was calculated. In patients with subsequent catheter coronary angiography (CCA) as reference,the diagnosis performance of MPI (for per-vessel ≥50% and ≥70% stenosis) and CCTA (for≥50% stenosis) were assessed. Results Of 23 patients who had completed the examination of ATP stress MPI plus CCTA,12 patients received follow-up CCA. At ATP stress MPI,77 segments (19.7%) in 13 patients (56.5%) had perfusion abnormalities. The MBF values of hypo-perfused myocardial segments decreased significantly compared with normal segments [(93±22)ml/(100 ml·min) vs. (147±27)ml/(100 ml·min);t=15.978,P=0.000]. At CCTA,93.9% (308/328) of the coronary segments had diagnostic image quality. With CCA as the reference standard,the per-vessel and per-segment sensitivity,specificity,and accuracy of CCTA for stenosis≥50% were 94.1%,93.5%,and 93.7% and 90.9%,97.8%,and 96.8%,and the per-vessel sensitivity,specificity and accuracy of ATP stress MPI for stenosis≥50% and ≥70% were 68.7%,100%,and 89.5% and 91.7%,100%,and 97.9%. The total ED of MPI and CCTA was (3.9±1.3) mSv [MPI:(3.5±1.2) mSv,CCTA:(0.3±0.1) mSv]. Conclusion The third-generation DSCT stress dynamic MPI at 70 kV combined with prospectively ECG-triggered high-pitch CCTA is a feasible and reliable tool for clinical diagnosis,with remarkably reduced radiation dose.

Psychological evaluations, referrals, and follow-up of adolescents after their exposure to Hurricane Hugo.

PubMed

Grant, S M; Hardin, S B; Pesut, D J; Hardin, T

1997-01-01

There is little understanding of adolescent appraisal of stress and crisis intervention for adolescents who are exposed to major stress such as that of a natural disaster. A description of the psychological evaluations, referrals, and follow-up assessments made by nurse practitioners (NPs) and a nurse psychotherapist (NPT) of adolescents (N = 507) in two South Carolina high schools who experienced Hurricane Hugo. The NPs' evaluations concluded that 63 adolescents (12%) exhibited symptoms of psychological distress. The NPs referred 36 of these adolescents to high school counselors for minor distress or school-related problems and 27 for more intensive clinical evaluation by an NPT. Of the 27 adolescents who were referred to the NPT, 10 had symptoms associated with adolescent adjustment reaction, 8 showed symptoms of depression, 5 revealed symptoms of posttraumatic stress disorder, and 4 complained of serious family problems. Based on these data and the mental processes described by these adolescents, the authors propose a model and suggest adolescent appraisal of stress and crisis is a critical issue to consider when intervening with adolescents who are exposed to major stressors, including those associated with a disaster.

The role of oxidative stress in menopause

PubMed Central

Doshi, Sejal B.; Agarwal, Ashok

2013-01-01

This review will discuss the concept of reproductive aging, which includes the definition of menopause, its symptoms, and predisposing conditions. It will elaborate upon the contributory factors implicated in the pathogenesis of menopause, focusing most prominently on oxidative stress. Specifically, this paper will explain how oxidative stress, in the form of free radicals and antioxidant deficiencies, has been directly linked to the decline of estrogen during reproductive aging. Additionally, this paper will elaborate upon the treatment options aimed at mitigating the menopausal symptoms and hormonal deficiencies that can lead to various disease processes. Treatment options such as hormonal therapy, antioxidant supplementation, and lifestyle modification have been explored for their effectiveness in treating and preventing the symptoms and sequelae of menopause. The majority of information in this review was obtained through PubMed and the National Library of Medicine. While most references in this paper are original research articles, a limited number of references are comprehensive reviews on the topic. PMID:24672185

Lower white blood cell counts in elite athletes training for highly aerobic sports.

PubMed

Horn, P L; Pyne, D B; Hopkins, W G; Barnes, C J

2010-11-01

White cell counts at rest might be lower in athletes participating in selected endurance-type sports. Here, we analysed blood tests of elite athletes collected over a 10-year period. Reference ranges were established for 14 female and 14 male sports involving 3,679 samples from 937 females and 4,654 samples from 1,310 males. Total white blood cell counts and counts of neutrophils, lymphocytes and monocytes were quantified. Each sport was scaled (1-5) for its perceived metabolic stress (aerobic-anaerobic) and mechanical stress (concentric-eccentric) by 13 sports physiologists. Substantially lower total white cell and neutrophil counts were observed in aerobic sports of cycling and triathlon (~16% of test results below the normal reference range) compared with team or skill-based sports such as water polo, cricket and volleyball. Mechanical stress of sports had less effect on the distribution of cell counts. The lower white cell counts in athletes in aerobic sports probably represent an adaptive response, not underlying pathology.

The influence of microgravity on Euglena gracilis as studied on Shenzhou 8.

PubMed

Nasir, A; Strauch, S M; Becker, I; Sperling, A; Schuster, M; Richter, P R; Weißkopf, M; Ntefidou, M; Daiker, V; An, Y A; Li, X Y; Liu, Y D; Lebert, M

2014-01-01

The German Aerospace Center (DLR) enabled German participation in the joint space campaign on the unmanned Shenzhou 8 spacecraft in November 2011. In this report, the effect of microgravity on Euglena gracilis cells is described. Custom-made dual compartment cell fixation units (containing cells in one chamber and fixative - RNA lysis buffer - in another one) were enclosed in a small container and placed in the Simbox incubator, which is an experiment support system. Cells were fixed by injecting them with fixative at different time intervals. In addition to stationary experiment slots, Simbox provides a 1 g reference centrifuge. Cell fixation units were mounted in microgravity and 1 g reference positions of Simbox. Two Simbox incubators were used, one for space flight and the other as ground reference. Cells were fixed soon after launch and shortly before return of the spaceship. Due to technical problems, only early in-flight samples (about 40 min after launch microgravity and corresponding 1 g reference) were fully mixed with fixative, therefore only data from those samples are presented. Transcription of several genes involved in signal transduction, oxidative stress defence, cell cycle regulation and heat shock responses was investigated with quantitative PCR. The data indicate that Euglena cells suffer stress upon short-term exposure to microgravity; various stress-induced genes were up-regulated. Of 32 tested genes, 18 were up-regulated, one down-regulated and the rest remained unaltered. These findings are in a good agreement with results from other research groups using other organisms. © 2013 German Botanical Society and The Royal Botanical Society of the Netherlands.

The Impact of Minority Stress on Mental Health and Substance Use Among Sexual Minority Women

PubMed Central

Lehavot, Keren; Simoni, Jane M.

2014-01-01

Objective We examined the direct and indirect impact of minority stress on mental health and substance use among sexual minority women. Method A combination of snowball and targeted sampling strategies was used to recruit lesbian and bisexual women (N = 1,381) for a cross-sectional, online survey. Participants (M age = 33.54 years; 74% White) completed a questionnaire assessing gender expression, minority stressors (i.e., victimization, internalized homophobia, and concealment), social–psychological resources (i.e., social support, spirituality), and health-related outcomes. We used structural equation modeling to test associations among these factors, with gender expression as an antecedent and social–psychological resources as a mediator between minority stress and health. Results The final model demonstrated acceptable fit, χ2(79) = 414.00, p < .05, confirmatory fit index = .93, Tucker–Lewis index = .91, standardized root-mean-square residual = .05, root-mean-square error of approximation = .06, accounting for significant portions of the variance in mental health problems (56%) and substance use (14%), as well as the mediator social–psychological resources (24%). Beyond indirect effects of minority stress on health outcomes, direct links emerged between victimization and substance use and between internalized homophobia and substance use. Conclusions Findings indicate a significant impact of minority stressors and social–psychological resources on mental health and substance use among sexual minority women. The results improve understanding of the distinct role of various minority stressors and their mechanisms on health outcomes. Health care professionals should assess for minority stress and coping resources and refer for evidence-based psychosocial treatments. PMID:21341888

Fatigue-type stress fractures of the lower limb associated with fibrous cortical defects/non-ossifying fibromas in the skeletally immature.

PubMed

Shimal, A; Davies, A M; James, S L J; Grimer, R J

2010-05-01

To investigate the association of a fatigue-type stress fracture and a fibrous cortical defect/non-ossifying fibroma (FCD/NOF) of the lower limb long bones in skeletally immature patients. The patient database of a specialist orthopaedic oncology centre was searched to determine the number of skeletally immature patients (

Postconditioning hormesis put in perspective: an overview of experimental and clinical studies.

PubMed

Wiegant, F A C; Prins, H A B; Van Wijk, R

2011-01-01

A beneficial effect of applying mild stress to cells or organisms, that were initially exposed to a high dose of stress, has been referred to as 'postconditioning hormesis'. The initial high dose of stress activates intrinsic self-recovery mechanisms. Modulation of these endogenous adaptation strategies by administration of a subsequent low dose of stress can confer effects that are beneficial to the biological system. Owing to its potentially therapeutic applications, postconditioning hormesis is subject to research in various scientific disciplines. This paper presents an overview of the dynamics of postconditioning hormesis and illustrates this phenomenon with a number of examples in experimental and clinical research.

A novel method for calculating the energy barriers for carbon diffusion in ferrite under heterogeneous stress

NASA Astrophysics Data System (ADS)

Tchitchekova, Deyana S.; Morthomas, Julien; Ribeiro, Fabienne; Ducher, Roland; Perez, Michel

2014-07-01

A novel method for accurate and efficient evaluation of the change in energy barriers for carbon diffusion in ferrite under heterogeneous stress is introduced. This method, called Linear Combination of Stress States, is based on the knowledge of the effects of simple stresses (uniaxial or shear) on these diffusion barriers. Then, it is assumed that the change in energy barriers under a complex stress can be expressed as a linear combination of these already known simple stress effects. The modifications of energy barriers by either uniaxial traction/compression and shear stress are determined by means of atomistic simulations with the Climbing Image-Nudge Elastic Band method and are stored as a set of functions. The results of this method are compared to the predictions of anisotropic elasticity theory. It is shown that, linear anisotropic elasticity fails to predict the correct energy barrier variation with stress (especially with shear stress) whereas the proposed method provides correct energy barrier variation for stresses up to ˜3 GPa. This study provides a basis for the development of multiscale models of diffusion under non-uniform stress.

A novel method for calculating the energy barriers for carbon diffusion in ferrite under heterogeneous stress.

PubMed

Tchitchekova, Deyana S; Morthomas, Julien; Ribeiro, Fabienne; Ducher, Roland; Perez, Michel

2014-07-21

A novel method for accurate and efficient evaluation of the change in energy barriers for carbon diffusion in ferrite under heterogeneous stress is introduced. This method, called Linear Combination of Stress States, is based on the knowledge of the effects of simple stresses (uniaxial or shear) on these diffusion barriers. Then, it is assumed that the change in energy barriers under a complex stress can be expressed as a linear combination of these already known simple stress effects. The modifications of energy barriers by either uniaxial traction/compression and shear stress are determined by means of atomistic simulations with the Climbing Image-Nudge Elastic Band method and are stored as a set of functions. The results of this method are compared to the predictions of anisotropic elasticity theory. It is shown that, linear anisotropic elasticity fails to predict the correct energy barrier variation with stress (especially with shear stress) whereas the proposed method provides correct energy barrier variation for stresses up to ∼3 GPa. This study provides a basis for the development of multiscale models of diffusion under non-uniform stress.

Maltreatment type, exposure characteristics, and mental health outcomes among clinic referred trauma-exposed youth.

PubMed

Hodgdon, Hilary B; Spinazzola, Joseph; Briggs, Ernestine C; Liang, Li-Jung; Steinberg, Alan M; Layne, Christopher M

2018-05-28

Building upon prior research documenting differential effects of psychological maltreatment, physical, and sexual abuse on youth mental health outcomes (Spinazzola et al., 2014), the present study sought to clarify the relative predictive contributions of type of maltreatment compared to salient exposure characteristics. The sample included 5058 clinic-referred youth from the Core Dataset (CDS) of the National Child Traumatic Stress Network (NCTSN) with lifetime histories of exposure to one or more of three specific types of maltreatment: psychological maltreatment (PM), physical abuse (PA), and sexual abuse (SA). First, we examined variations in salient trauma characteristics (age of onset, duration of exposure, number of co-occurring trauma types, and perpetrator type and number) by maltreatment group. Second, we examined whether type of maltreatment remained associated with mental health measures after adjusting for demographic variables and trauma characteristics. Profiles for youth with PM were more severe than youth who experienced either PA or SA only. Co-occurring PM and PA was associated with the most severe trauma exposure profile and with severity of PTSD symptoms, even after adjusting for demographic and trauma characteristics. Youth exposed to SA only had a distinct trauma profile and greater PTSD symptom severity after adjusting for demographic and trauma characteristic variables. Study findings hold important implications for trauma screening, assessment, and intervention, as well as for traumatic stress research methods that extend beyond abuse-specific or cumulative-risk approaches. Copyright © 2018 Elsevier Ltd. All rights reserved.

Restored agricultural wetlands in Central Iowa: habitat quality and amphibian response

USGS Publications Warehouse

Reeves, Rebecca A.; Pierce, Clay; Smalling, Kelly L.; Klaver, Robert W.; Vandever, Mark W.; Battaglin, William A.; Muths, Erin L.

2016-01-01

Amphibians are declining throughout the United States and worldwide due, partly, to habitat loss. Conservation practices on the landscape restore wetlands to denitrify tile drainage effluent and restore ecosystem services. Understanding how water quality, hydroperiod, predation, and disease affect amphibians in restored wetlands is central to maintaining healthy amphibian populations in the region. We examined the quality of amphibian habitat in restored wetlands relative to reference wetlands by comparing species richness, developmental stress, and adult leopard frog (Lithobates pipiens) survival probabilities to a suite of environmental metrics. Although measured habitat variables differed between restored and reference wetlands, differences appeared to have sub-lethal rather than lethal effects on resident amphibian populations. There were few differences in amphibian species richness and no difference in estimated survival probabilities between wetland types. Restored wetlands had more nitrate and alkaline pH, longer hydroperiods, and were deeper, whereas reference wetlands had more amphibian chytrid fungus zoospores in water samples and resident amphibians exhibited increased developmental stress. Restored and reference wetlands are both important components of the landscape in central Iowa and maintaining a complex of fish-free wetlands with a variety of hydroperiods will likely contribute to the persistence of amphibians in this landscape.

Development and validation of a novel stability-indicating HPLC method for the quantitative determination of eleven related substances in ezetimibe drug substance and drug product.

PubMed

Luo, Zhiqiang; Deng, Zhongqing; Liu, Yang; Wang, Guopeng; Yang, Wenning; Hou, Chengbo; Tang, Minming; Yang, Ruirui; Zhou, Huaming

2015-07-01

Ezetimibe is a novel lipid-lowering agent that inhibits intestinal absorption of dietary and biliary cholesterol. In the present work, a simple, sensitive and reproducible gradient reverse phase high performance liquid chromatographic (RP-HPLC) method for separation and determination of the related substances of ezetimibe was developed and validated. Eleven potential process-related impurities (starting materials, (3S,4S,3'S)-isomer, degradants and byproducts) were identified in the crude samples. Tentative structures for all the impurities were assigned primarily based on comparison of their retention time and mass spectrometric data with that of available standards and references. This method can be applied to routine analysis in quality control of both bulk drugs and commercial tablets. Separation of all these compounds was performed on a Phenomenex Luna Phenyl-Hexyl (100mm×4.6mm, 5μm) analytical column. The mobile phase-A consists of acetonitrile-water (pH adjusted to 4.0 with phosphoric acid)-methanol at 15:75:10 (v/v/v), and mobile phase-B contains acetonitrile. The eluted compounds were monitored at 210nm. Ezetimibe was subjected to hydrolytic, acid, base, oxidative, photolytic and thermal stress conditions as per ICH serves to generate degradation products that can be used as a worst case to assess the analytical method performance. The drug showed extensive degradation in thermal, acid, oxidative, base and hydrolytic stress conditions, while it was stable to photolytic degradation conditions. The main degradation product formed under thermal, acid, oxidative, base and hydrolytic stress conditions corresponding to (2R,3R,6S)-N, 6-bis(4-fluorophenyl)-2-(4-hydroxyphenyl)-oxane-3-carboxamide (Ezetimibe tetrahydropyran impurity) was characterized by LC-MS/MS analysis. The degradation products were well resolved from the main peak and its impurities, thus proved the stability-indicating power of the method. The developed method was validated as per international conference on harmonization (ICH) guidelines with respect to specificity, linearity, limit of detection (LOD), limit of quantification (LOQ), accuracy, precision and robustness. Copyright © 2015 Elsevier B.V. All rights reserved.

Improved ultrasonic standard reference blocks

NASA Technical Reports Server (NTRS)

Eitzen, D. G.; Sushinsky, G. F.; Chwirut, D. J.; Bechtoldt, C. J.; Ruff, A. W.

1976-01-01

A program to improve the quality, reproducibility and reliability of nondestructive testing through the development of improved ASTM-type ultrasonic reference standards is described. Reference blocks of aluminum, steel, and titanium alloys are to be considered. Equipment representing the state-of-the-art in laboratory and field ultrasonic equipment was obtained and evaluated. RF and spectral data on ten sets of ultrasonic reference blocks have been taken as part of a task to quantify the variability in response from nominally identical blocks. Techniques for residual stress, preferred orientation, and micro-structural measurements were refined and are applied to a reference block rejected by the manufacturer during fabrication in order to evaluate the effect of metallurgical condition on block response. New fabrication techniques for reference blocks are discussed and ASTM activities are summarized.

Predictors of Treatment Completion for Families Referred to Trauma Focused-Cognitive Behavioral Therapy after Child Abuse.

PubMed

Celano, Marianne; NeMoyer, Amanda; Stagg, Anna; Scott, Nikia

2018-05-22

Despite advances in the dissemination of evidence-based therapy for abuse-related traumatic stress, many referred children fail to complete treatment. Using archival data from a sample of children participating in trauma-focused cognitive behavioral therapy (TF-CBT) at a hospital-based child advocacy center, analyses explored the impact of baseline child traumatic stress symptoms, a second (nonprimary) caregiver's treatment attendance, and the number of assessment sessions on treatment completion while controlling for demographic variables. We conducted analyses separately for the total sample (n = 77) and for a subsample of children 6 years of age or older (n = 65) who completed measures of traumatic stress. Families who completed TF-CBT had fewer pretreatment assessment sessions, odds ratio (OR) = 0.41, 95% CI [0.19, 0.88], and greater nonprimary caregiver session attendance, OR = 1.30, 95% CI [1.03, 1.64], than families who did not complete treatment. Child age, race, and insurance status did not predict treatment completion. Among children at least 6 years of age, treatment completion was related to younger child age, OR = 0.76, 95% CI [0.59, 0.98], and fewer diagnostic evaluation sessions, OR = 0.29, 95% CI [0.11, 0.74], but not to baseline traumatic stress symptoms. Findings may suggest benefits of shortening the assessment period and including a second caregiver in TF-CBT. Copyright © 2018 International Society for Traumatic Stress Studies.

Calibration of Wire-Like Manganin Gauges for Use in Planar Shock-Wave Experiments

NASA Astrophysics Data System (ADS)

Chapman, David J.; Braithwaite, Christopher H.; Proud, William G.

2009-12-01

Piezoresistive gauges have been used extensively for many decades as in-material stress transducers during shock wave experiments. Manganin demonstrates a high piezoresistive response which is relatively temperature independent. As such manganin gauges have been widely calibrated by many authors for use during shock-wave experiments. The precise calibration has been demonstrated to depend on both the chemical composition and mechanical history of the manganin, and on the geometry of the gauge. The research presented in this paper refers to the calibration of a commercially available manganin gauge, Micro-measurements J2M-SS-580SF-025, generally referred to as the T-gauge owing to its geometry. The T-gauge has seen widespread use as a pressure transducer to measure lateral stress during plate-impact experiments. It has been previously proposed that T-gauges have a similar response to the grid foil-like manganin gauges extensively calibrated by Rosenberg et al. However, recently it has been suggested that they in fact behave in a wire-like manner. The results presented here demonstrate that the gauges' behaviour is wire-like when mounted to measure longitudinal stress. A modified calibration can be applied successfully to convert the relative resistance change to the stress normal to the gauge element. These results have important ramifications for the reduction of lateral stress measurements previously made using the T-gauge.

Calibration of Wire-Like Manganin Gauges for Use in Planar Shock-Wave Experiments

NASA Astrophysics Data System (ADS)

Chapman, David; Proud, William

2009-06-01

Peizoresistive gauges have been used extensively for many decades as in-material stress transducers during shock wave experiments. Manganin demonstrates a high piezoresistive response which is relatively temperature independent. As such manganin gauges have been widely calibrated by many authors for use during shock-wave experiments. The precise calibration has been demonstrated to depend on both the chemical composition and mechanical history of the manganin, and on the geometry of the gauge. The research presented in this paper refers to the calibration of a commercially available manganin gauge, Micro-measurements J2M-SS-580SF-025, generally referred to as the T-gauge owing to its geometry. The T-gauge has seen widespread use as a pressure transducer to measure lateral stress during plate-impact experiments. It has been previously proposed that T-gauges have a similar response to the grid foil-like manganin gauges extensively calibrated by Rosenberg et. al.. However, recently it has been suggested that they in fact behave in a wire-like manner. The results presented here demonstrate that the gauges behaviour is wire-like when mounted to measure longitudinal stress. A modified calibration can be applied successfully to convert the relative resistance change to the stress normal to the gauge element. These results have important ramifications for the reduction of lateral stress measurements previously made using the T-gauge.

A Study of the Development of Steady and Periodic Unsteady Turbulent Wakes Through Curved Channels at Positive, Zero, and Negative Streamwise Pressure Gradients, Part 1

NASA Technical Reports Server (NTRS)

Schobeiri, M. T.; John, J.

1996-01-01

The turbomachinery wake flow development is largely influenced by streamline curvature and streamwise pressure gradient. The objective of this investigation is to study the development of the wake under the influence of streamline curvature and streamwise pressure gradient. The experimental investigation is carried out in two phases. The first phase involves the study of the wake behind a stationary circular cylinder (steady wake) in curved channels at positive, zero, and negative streamwise pressure gradients. The mean velocity and Reynolds stress components are measured using a X-hot-film probe. The measured quantities obtained in probe coordinates are transformed to a curvilinear coordinate system along the wake centerline and are presented in similarity coordinates. The results of the steady wakes suggest strong asymmetry in velocity and Reynolds stress components. However, the velocity defect profiles in similarity coordinates are almost symmetrical and follow the same distribution as the zero pressure gradient straight wake. The results of Reynolds stress distributions show higher values on the inner side of the wake than the outer side. Other quantities, including the decay of maximum velocity defect, growth of wake width, and wake integral parameters, are also presented for the three different pressure gradient cases of steady wake. The decay rate of velocity defect is fastest for the negative streamwise pressure gradient case and slowest for the positive pressure gradient case. Conversely, the growth of the wake width is fastest for the positive streamwise pressure gradient case and slowest for the negative streamwise pressure gradient. The second phase studies the development of periodic unsteady wakes generated by the circular cylinders of the rotating wake generator in a curved channel at zero streamwise pressure gradient. Instantaneous velocity components of the periodic unsteady wakes, measured with a stationary X-hot-film probe, are analyzed by the phase averaging techniques. The temporal distribution of velocity and Reynolds stress components obtained in a stationary frame of reference are transformed to a spatial distribution in a relative frame of reference. Profiles of phase-averaged velocity and Reynolds stress distributions in the relative frame of reference and similarity coordinates are presented. The velocity defect and Reynolds stress distributions agree with the results of the wake development behind a stationary cylinder in the curved channel at zero streamwise pressure gradient. The phase-averaged third-order correlations, presented in the relative frame of reference and similarity coordinates, show pronounced asymmetric features.

Risk Quantification for Sustaining Coastal Military Installation Asset and Mission Capabilities (RC-1701)

DTIC Science & Technology

2014-06-06

al. 2012, and references therein). The world’s oceans have an en01m ous capacity to store this heat , but the result is ocean wruming and all the...TC96 wind model computes surface stress and average wind speed and direction in the PBL of a tropical cyclone. The model inputs are meteorological...is the effective earth elasticity factor; τs,winds and τs,waves are surface stresses due to winds and waves, respectively; τb is bottom stress ; M

Plant moisture stress: a portable freezing-point meter compared with the psychrometer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cary, J.W.; Fisher, H.D.

A small portable instrument for measuring the freezing-point depression of plant tissue has been developed for field use. The instrument is easy to operate and can be constructed from materials costing less than $100. Moisture stress measurements made with the freezing-point meter on a variety of plants were compared with vapor pressure psychrometer measurements. Variation between duplicates in the freezing point averaged 1.2 bars, but differences between stress measurements made with the psychrometer and freezing-point instrument averaged 2.6 bars. 11 references, 5 figures, 2 tables.

Bending moments, envelope, and cable stresses in non-rigid airships

NASA Technical Reports Server (NTRS)

Burgess, C P

1923-01-01

This report describes the theory of calculating the principal stresses in the envelope of a nonrigid airship used by the Bureau of Aeronautics, United States Navy. The principal stresses are due to the gas pressure and the unequal distribution of weight and buoyancy, and the concentrated loads from the car suspension cables. The second part of the report deals with the variations of tensions in the car suspension cables of any type of airship, with special reference to the rigid type, due to the propeller thrust or the inclination of the airship longitudinally.

Wave-induced drift of large floating sheets

NASA Astrophysics Data System (ADS)

Christensen, K. H.; Weber, J. E.

In this article we study the wave-induced drift of large, flexible shallow floating objects, referred to as sheets. When surface waves propagate through a sheet, they provide a mean stress on the sheet, resulting in a mean drift. In response, the sheet generates an Ekman current. The drift velocity of the sheet is determined by (i) the wave-induced stress, (ii) the viscous stress due to the Ekman current, and (iii) the Coriolis force. The sheet velocity and the current beneath the sheet are determined for constant and depth-varying eddy viscosities.

Antioxidant capacity of BO-653, 2,3-dihydro-5-hydroxy-4,6-di-tert-butyl-2,2-dipentylbenzofuran, and uric acid as evaluated by ORAC method and inhibition of lipid peroxidation.

PubMed

Niki, Etsuo; Fukuhara, Akiko; Omata, Yo; Saito, Yoshiro; Yoshida, Yasukazu

2008-04-01

The role of radical-scavenging antioxidant against oxidative stress has received much attention. The antioxidant capacity has been assessed by various methods. Above all, oxygen radical absorbance capacity (ORAC) has been frequently employed [Prior et.al., J. Agric. Food Chem.2005, 53, 4290]. In the present study, the antioxidant capacity of 2,3-dihydro-5-hydroxy-4,6-di-tert-butyl-2,2-dipentylbenzofuran (BO-653) and uric acid was assessed by ORAC method using pyranine as a reference probe and compared with that against lipid peroxidation of human plasma. It was found that BO-653 was assessed to be much less potent than uric acid by ORAC method, whereas BO-653 exerted much higher antioxidant activity than uric acid against plasma lipid peroxidation. The reason for such discrepancy is discussed. The results suggest that ORAC method is suitable for the assessment of free radical scavenging capacity, but not for the assessment of antioxidant capacity against lipid peroxidation in plasma.

Application of the Mathar Method to Identify Internal Stress Variation in Steel as a Welding Process Result

NASA Astrophysics Data System (ADS)

Kowalski, Dariusz

2017-06-01

The paper deals with the method to identify internal stresses in two-dimensional steel members. Steel members were investigated in the delivery stage and after assembly, by means of electric-arc welding. In order to perform the member assessment two methods to identify the stress variation were applied. The first is a non-destructive measurement method employing local external magnetic field and to detecting the induced voltage, including Barkhausen noise The analysis of the latter allows to assess internal stresses in a surface layer of the material. The second method, essential in the paper, is a semi-trepanation Mathar method of tensometric strain variation measurement in the course of a controlled void-making in the material. Variation of internal stress distribution in the material led to the choice of welding technology to join. The assembly process altered the actual stresses and made up new stresses, triggering post-welding stresses as a response for the excessive stress variation.

Modelling Coastal Cliff Recession Based on the GIM-DDD Method

NASA Astrophysics Data System (ADS)

Gong, Bin; Wang, Shanyong; Sloan, Scott William; Sheng, Daichao; Tang, Chun'an

2018-04-01

The unpredictable and instantaneous collapse behaviour of coastal rocky cliffs may cause damage that extends significantly beyond the area of failure. Gravitational movements that occur during coastal cliff recession involve two major stages: the small deformation stage and the large displacement stage. In this paper, a method of simulating the entire progressive failure process of coastal rocky cliffs is developed based on the gravity increase method (GIM), the rock failure process analysis method and the discontinuous deformation analysis method, and it is referred to as the GIM-DDD method. The small deformation stage, which includes crack initiation, propagation and coalescence processes, and the large displacement stage, which includes block translation and rotation processes during the rocky cliff collapse, are modelled using the GIM-DDD method. In addition, acoustic emissions, stress field variations, crack propagation and failure mode characteristics are further analysed to provide insights that can be used to predict, prevent and minimize potential economic losses and casualties. The calculation and analytical results are consistent with previous studies, which indicate that the developed method provides an effective and reliable approach for performing rocky cliff stability evaluations and coastal cliff recession analyses and has considerable potential for improving the safety and protection of seaside cliff areas.

Exploring the expression of depression and distress in aboriginal men in central Australia: a qualitative study

PubMed Central

2012-01-01

Background Despite being at heightened risk of developing mental illness, there has been little research into the experience of depression in Australian Aboriginal populations. This study aimed to outline the expression, experience, manifestations and consequences of emotional distress and depression in Aboriginal men in central Australia. Methods Utilizing a grounded theory approach, in depth semi-structured interviews were conducted with 22 theoretically sampled young, middle aged and senior Aboriginal men and traditional healers. Analysis was conducted by a single investigator using constant comparison methods. Results Depressive symptoms were common and identifiable, and largely consistent with symptom profiles seen in non-Aboriginal groups. For Aboriginal men, depression was expressed and understood as primarily related to weakness or injury of the spirit, with a lack of reference to hopelessness and specific somatic complaints. The primary contributors to depression related to the loss of connection to social and cultural features of Aboriginal life, cumulative stress and marginalisation. Conclusions Depression and depressive symptomatology clearly exists in Aboriginal men, however its determinants and expression differ from mainstream populations. Emotions were understood within the construction of spirit, Kurunpa, which was vulnerable to repetitive and powerful negative social forces, loss, and stress across the life course, and served to frame the physical and emotional experience and expression of depression. PMID:22853622

Effects of Military activity and habitat quality on DNA damage and oxidative stress in the largest population of the Federally threatened gopher tortoise.

PubMed

Theodorakis, Christopher W; Adams, S Marshall; Smith, Chandra; Rotter, Jamie; Hay, Ashley; Eslick, Joy

2017-12-01

Department of Defense lands are essential for providing important habitat for threatened, endangered, and at-risk species (TER-S). However, there is little information on the effects of military-related contaminants on TER-S on these lands in field situations. Thus, this study examined genotoxicity and oxidative stress in gopher tortoises (Gopherus polyphemus) on Camp Shelby, MS-the largest known population of this species, which is listed as an "endangered species" in Mississippi and a "threatened species" by the U.S. government. Blood was collected from tortoises at 19 different sites on the base with different levels of habitat quality (high-quality and low-quality habitat) and military activity (high, low, and no military activity). Oxidative stress was quantified as lipid peroxidation and GSSG/GSH ratios, while DNA damage was determined using flow cytometry. Our results suggest that: (1) for tortoises residing in low-quality habitats, oxidative stress and DNA damage increased with increasing military activity, while in high-quality habitats, oxidative stress and DNA damage decreased with increasing military activity; (2) in the absence of military activity, tortoises in high-quality habitat had higher levels of oxidative stress and DNA damage than those in low-quality habitat, and (3) there were interactions between military activity, habitat quality, and landuse in terms of the amount of observable DNA damage and oxidative stress. In particular, on high-quality habitat, tortoises from areas with high levels of military activity had lower levels of oxidative stress and DNA damage biomarkers than on reference sites. This may represent a compensatory or hormetic response. Conversely, on low-quality habitats, the level of oxidative stress and DNA damage was lower on the reference sites. Thus, tortoises on higher-quality habitats may have a greater capacity for compensatory responses. In terms of management implications, it is suggested that low quality habitats should be a higher priority for remediation, and lower priority for conducting military activities.

46 CFR 54.30-10 - Method of performing mechanical stress relief.

Code of Federal Regulations, 2011 CFR

2011-10-01

... PRESSURE VESSELS Mechanical Stress Relief § 54.30-10 Method of performing mechanical stress relief. (a) The mechanical stress relief shall be carried out in accordance with the following stipulations using water as... 46 Shipping 2 2011-10-01 2011-10-01 false Method of performing mechanical stress relief. 54.30-10...

46 CFR 54.30-10 - Method of performing mechanical stress relief.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Method of performing mechanical stress relief. 54.30-10... PRESSURE VESSELS Mechanical Stress Relief § 54.30-10 Method of performing mechanical stress relief. (a) The mechanical stress relief shall be carried out in accordance with the following stipulations using water as...

46 CFR 54.30-10 - Method of performing mechanical stress relief.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false Method of performing mechanical stress relief. 54.30-10... PRESSURE VESSELS Mechanical Stress Relief § 54.30-10 Method of performing mechanical stress relief. (a) The mechanical stress relief shall be carried out in accordance with the following stipulations using water as...

46 CFR 54.30-10 - Method of performing mechanical stress relief.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 2 2013-10-01 2013-10-01 false Method of performing mechanical stress relief. 54.30-10... PRESSURE VESSELS Mechanical Stress Relief § 54.30-10 Method of performing mechanical stress relief. (a) The mechanical stress relief shall be carried out in accordance with the following stipulations using water as...

46 CFR 54.30-10 - Method of performing mechanical stress relief.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false Method of performing mechanical stress relief. 54.30-10... PRESSURE VESSELS Mechanical Stress Relief § 54.30-10 Method of performing mechanical stress relief. (a) The mechanical stress relief shall be carried out in accordance with the following stipulations using water as...

Finite element simulation of the mechanism of laser ultrasound induced pain weapon

NASA Astrophysics Data System (ADS)

Zhou, Bo; Zhan, Ren Jun; Shan, Ning

2018-03-01

The Laser-Ultrasonic technique uses laser energy to generate ultrasound waves in various solids. In normal conditions, this technique is used to inspect large structures without destruction, but in military use, we hope get this destruction. Nociceptors in Human skin can feel cold, heat, mechanical and other stimuli, when the stimulus exceeds a certain threshold will produce pain. Based on this principle, a laser induced pain weapon may be made. The generated ultrasound wave form is affected by features of laser pulse. The results obtained from the finite element model of laser generated ultrasound are presented in terms of temperature and displacement. At first step, the transient temperature field can be precisely calculated by using the finite element method. Then, laser generated surface acoustic wave forms are calculated by coupling the temperature distribution. Displacement is used to represent the mechanical action of skin caused by laser ultrasound. Results from numerical simulation are compared with other references; the accuracy of the method is proved accordingly. The results of simulation in the given conditions demonstrate that the stresses generated by pulse laser in human skin model were about -8 and +4 MPa. According to the results of simulation, the max and min stress are both emerged in the range of 0 600 um, that is exactly the location of myelinated Aδ and unmyelinated C nociceptor. The value of stress is can be adjusted by chose suitable parameters of laser. The study provides a possibility for developing a new non-lethal weapon to control riots or crowd.

Finite Element Modeling Used to Study Stress Distribution on the Foot

NASA Technical Reports Server (NTRS)

Morales, Nelson; Davis, Brian; Tajaddini, Azita

2004-01-01

A method to study the stress distribution inside the forefoot during walking was developed at the Cleveland Clinic Foundation by a researcher from the NASA Glenn Research Center. In this method, a semiautomated process was outlined to create a three-dimensional, patient-specific, finite element model (FEM) of the forefoot using magnetic resonance images (MRI). The images were processed in Matlab using the k-nearest neighbor (k-NN) classification algorithm and Sobel edge detection to separate the different tissue types: bone, skin, fat, and muscle. This information was used to create curves and surfaces that were exported to an FEM preprocessor known as Truegrid. In Truegrid, eight-noded or brick elements were created by using surface mapping. The FEM was processed and postprocessed in Abaqus. Material properties of the models were obtained from past experiments such as fat pad confined compression, skin axial and biaxial tests, muscle in vivo compressive tests, and reference literature (bone properties). Nonlinear (hyperelastic) material models were used for the skin (epidermis and dermis), fat, and muscles; and a linear elastic model was used for the bones. Muscle activation during walking yielded uncertainties in the muscle material model since contracted muscles are stiffer than relaxed muscles. These uncertainties were resolved by performing a sensitivity analysis of the muscle material properties. The original properties were multiplied by arbitrary factors of 2, 3, 0.5, and 0.33. The strain and stress distributions, as well as the locations of peak values, were similar in all cases. The peak contact pressure P obtained for each case varied with respect to the applied factor f as follows:

Residual stress determination of direct metal laser sintered (DMLS) inconel specimens and parts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watkins, Thomas R.; Unocic, Kinga A.; Maziasz, Philip J.

Residual stress determinations and microstructural studies were performed on a series of Inconel 718Plus prisms built using Direct Metal Laser Sintering (DMLS) at Honeywell Aerospace (hereafter also referred to as Honeywell). The results are being used to validate and improve existing models at Honeywell, and ultimately will expedite the implementation of DMLS throughout various industrial sectors (automotive, biomedical, etc.).

Coping Strategies as Moderators of the Relation between Individual Race-Related Stress and Mental Health Symptoms for African American Women

ERIC Educational Resources Information Center

Greer, Tawanda M.

2011-01-01

The purpose of this investigation was to examine coping strategies as moderators of the relationship between individual race-related stress and mental health symptoms among a sample of 128 African American women. Coping strategies refer to efforts used to resolve problems and those used to manage, endure, or alleviate distress. Culture-specific…

[Evidence-based medicine--method, critical appraisal and usefulness for professionalized business practice in medical].

PubMed

Portwich, P

2005-05-01

The concept of evidence-based medicine (EBM) describes 5 steps that lead to a scientifically based solution of clinical problems. EBM is often reduced to the search for the best evidence (randomised controlled trials, meta-analyses) or the introduction of guidelines. This causes criticism and may have consequences for medicine. But EBM also emphasizes the so-called clinical expertise of the doctor, which is important for reference to the individual patient. This point of EBM is being developed further. Connected with the theory of professionalization by U. Oevermann, stressing the importance of hermeneutical competence, EBM turns out to be a sophisticated model of professional medical practice.

Turbulent slurry flow measurement using ultrasonic Doppler method in rectangular pipe

NASA Astrophysics Data System (ADS)

Bareš, V.; Krupička, J.; Picek, T.; Brabec, J.; Matoušek, V.

2014-03-01

Distribution of velocity and Reynolds stress was measured using ultrasonic velocimetry in flows of water and Newtonian water-ballotini slurries in a pressurized Plexiglas pipe. Profiles of the measured parameters were sensed in the vertical plane at the centreline of a rectangular cross section of the pipe. Reference measurements in clear water produced expected symmetrical velocity profiles the shape of which was affected by secondary currents developed in the rectangular pipe. Slurry-flow experiments provided information on an effect of the concentration of solid grains on the internal structure of the flow. Strong attenuation of velocity fluctuations caused by a presence of grains was identified. The attenuation increased with the increasing local concentration of the grains.

["In psychiatry, nothing more degrading can happen to you"].

PubMed

Frajo-Apor, Beatrice; Stippler, Maria; Meise, Ullrich

2011-08-01

OBJECTIVE The subjective view of psychiatric patients on mechanical restraint is to be examined and the necessity of dealing with this issue consciously is to be pointed out. METHODS 14 patients, who experienced mechanical restraint during a stay in a psychiatric hospital, were questioned in a problem-centered, semi-structured interview. Data analysis was based on inductive category formation, using Mayring's qualitative content analysis. RESULTS Mechanical restraint is primarily experienced as stressful or traumatizing. Patients complain about a lack of information, support and response when referring to mechanical restraint. CONCLUSION Reports of patients who have experienced coercive measures should be increasingly integrated into clinical practice. © Georg Thieme Verlag KG Stuttgart · New York.

The CMEMS L3 scatterometer wind product

NASA Astrophysics Data System (ADS)

de Kloe, Jos; Stoffelen, Ad; Verhoef, Anton

2017-04-01

Within the Copernicus Marine Environment Monitoring Service KNMI produces several ocean surface Level 3 wind products. These are daily updated global maps on a regular grid of the available scatterometer wind observations and derived properties, and produced from our EUMETSAT Ocean and Sea Ice Satellite Application Facility (OSI SAF) operational near-real time (NRT) Level 2 swath-based wind products by linear interpolation. Currently available products are the ASCAT on Metop A/B stress equivalent wind vectors, accompanied by ECMWF NWP reference stress equivalent winds from the operational ECMWF NWP model. For each ASCAT scatterometer we provide products on 2 different resolutions, 0.25 and 0.125 degrees. In addition we provide wind stress vectors, and derivative fields (curl and divergence) for stress equivalent wind and wind stress, both for the observations and for the NWP reference winds. New NRT scatterometer products will be made available when additional scatterometer instruments become available, and NRT access to the data can be arranged. We hope OSCAT on the Indian ScatSat-1 satellite will be the the next NRT product to be added. In addition multi-year reprocessing datasets have been made available for ASCAT on Metop-A (1-Jan-2007 up to 31-Mar-2014) and Seawinds on QuikScat (19-Jul-1999 up to 21-Nov-2009). For ASCAT 0.25 and 0.125 degree resolution products are provided, and for QuikScat 0.50 and 0.25 degree resolution products are provided, These products are based on reprocessing the L2 scatterometer products with the latest processing software version, and include reference winds from the ECMWF ERA-Interim model. Additional reprocessing datasets will be added when reprocessed L2 datasets become available. This will hopefully include the ERS-1 and ERS-2 scatterometer datasets (1992-2001), which will extend the available date range back to 1992. These products are available for download through the CMEMS portal website: http://marine.copernicus.eu/

Towards an integrative soil health assessment strategy: a three tier (integrative biomarker response) approach with Eisenia fetida applied to soils subjected to chronic metal pollution.

PubMed

Asensio, Vega; Rodríguez-Ruiz, Amaia; Garmendia, Larraitz; Andre, Jane; Kille, Peter; Morgan, Andrew John; Soto, Manu; Marigómez, Ionan

2013-01-01

This is a pilot study for assessing soil ecosystem health in chronically polluted sites on the basis of a 3-tier approach (screening+scoring+understanding) designed to be cost-effective and scientifically based, and to provide straightforward advice and support to managers and stakeholders involved in environmental protection. For the initial screening (Tier 1), the use of a highly sensitive, low-cost biomarker such as neutral red uptake (NRU) in earthworm coelomocytes is proposed. In sites where an alteration in NRU has been established, the stress level may be further assessed by utilising a suite of low-cost and rapid biomarkers of effect integrated in an integrative biological response (IBR) index to obtain an objective (scored) assessment of the induced stress syndrome (Tier 2). The IBR/n index is based on the integration of biomarkers at different levels of biological organisation. Acyl-CoA oxidase activity (AOX), catalase activity (CAT), lipofuscin optical density (LOD%), NRU and the mean epithelial thickness (MET) have been used to calculate the IBR/n index. Biomarkers are determined in earthworms, Eisenia fetida, exposed ex situ to real soils (three mining sites and a reference) for 3, 10 and 17d. The 3d NRU (Tier 1) provided signal of stress. After 3d, PCA, based on the suite of biomarkers (Tier 2), discriminated reference and polluted sites according to toxicity profiles and at 17d, the most polluted site is segregated from less polluted and reference sites. Soils were classified as harmful, unhealthy (not apparently toxic) or healthy. Soils were investigated by microarray transcriptomics (Tier 3), to understand the causes (aetiology) and consequences (prognosis) of health impairment. Tier 3 discriminates, according to stress syndrome traits, soils that did not fall into the category of highly stressed and revealed the main agent causing toxicity at each site by identifying the toxicity mechanisms and biological responses. Copyright © 2012 Elsevier B.V. All rights reserved.

Quality of Life, Stress, and Mental Health in Parents of Children with Parentally Diagnosed Food Allergy Compared to Medically Diagnosed and Healthy Controls.

PubMed

Birdi, Gurkiran; Cooke, Richard; Knibb, Rebecca

2016-01-01

Background. Food allergy is related to poorer quality of life (QoL) and mental health of caregivers. Many parents diagnose food allergy in their child without seeking medical care and there is limited research on this group. This study investigated parental QoL and mental health in parents of children with parent-diagnosed food allergy (PA), medically diagnosed food allergy (MA), and a control group with no allergy (NA). Methods. One hundred and fifty parents from a general population completed validated measures of QoL, anxiety, depression, and stress. Results. Parents of children with food allergy (PA or MA) reported higher stress, anxiety, and depression than the control group (all p < 0.05). Parents of children with MA reported poorer food allergy related QoL compared to parents of children with PA (p < 0.05); parents of children with PA reported poorer general QoL compared to parents of children with MA (p < 0.05). Conclusion. Parents of children with food allergy have significantly poorer mental health compared to healthy controls, irrespective of whether food allergy is medically diagnosed or not. It is important to encourage parents to have their child medically tested for food allergy and to recognise and refer for psychological support where needed.

Mindfulness-based stress reduction, mindfulness-based cognitive therapy, and Zen meditation for depression, anxiety, pain, and psychological distress.

PubMed

Marchand, William R

2012-07-01

Mindfulness has been described as a practice of learning to focus attention on moment-bymoment experience with an attitude of curiosity, openness, and acceptance. Mindfulness practices have become increasingly popular as complementary therapeutic strategies for a variety of medical and psychiatric conditions. This paper provides an overview of three mindfulness interventions that have demonstrated effectiveness for psychiatric symptoms and/or pain. The goal of this review is to provide a synopsis that practicing clinicians can use as a clinical reference concerning Zen meditation, mindfulness-based stress reduction (MBSR), and mindfulness-based cognitive therapy (MBCT). All three approaches originated from Buddhist spiritual practices, but only Zen is an actual Buddhist tradition. MBSR and MBCT are secular, clinically based methods that employ manuals and standardized techniques. Studies indicate that MBSR and MBCT have broad-spectrum antidepressant and antianxiety effects and decrease general psychological distress. MBCT is strongly recommended as an adjunctive treatment for unipolar depression. The evidence suggests that both MBSR and MBCT have efficacy as adjunctive interventions for anxiety symptoms. MBSR is beneficial for general psychological health and stress management in those with medical and psychiatric illness as well as in healthy individuals. Finally, MBSR and Zen meditation have a role in pain management.

Anhydrobiotic insect Polypedilum vanderplanki: molecular mechanisms of DNA and protein protection against extreme environments.

NASA Astrophysics Data System (ADS)

Gusev, Oleg; Nakahara, Yuichi; Kikawada, Takahiro; Levinskikh, Margarita; Sychev, Vladimir; Okuda, Takashi

Some organisms showing no sign of living due to complete desiccation are nevertheless able to resume active life after rehydration. This peculiar biological state is referred to as "anhydrobiosis". Larvae of the sleeping chironomid, P. vanderplanki living in temporary pools in semi-arid areas on the African continent become completely desiccated upon drought, but can revive after water becomes available upon the next rain. The dried larvae can stand other extreme conditions, such as exposure to 100˚C, -270˚C, 100We have adopted several methods to evaluated DNA damage in cells of P. vanderplanki and cloned and analyzed expression of the main agent of genetic stress response showing that the larvae possess highly developed anti-stress genetic system, involving anti-oxidative stress genes, hsp and DNA reparation enzymes acting together to provide stability of proteins and DNA in the absence of water. From 2005, dried larvae were included in a number of research programs, including exposition to space environments onboard ISS and long-term exposure to outer space environment outside of ISS ("Expose-R" and"Biorisk" projects) and now are being considered for including into the Phobos-Grunt mission as a testing organism to analyze capability of resting stages of multicellular organism to interplanetary flights.

Laser effects based optimal laser parameter identifications for paint removal from metal substrate at 1064 nm: a multi-pulse model

NASA Astrophysics Data System (ADS)

Han, Jinghua; Cui, Xudong; Wang, Sha; Feng, Guoying; Deng, Guoliang; Hu, Ruifeng

2017-10-01

Paint removal by laser ablation is favoured among cleaning techniques due to its high efficiency. How to predict the optimal laser parameters without producing damage to substrate still remains challenging for accurate paint stripping. On the basis of ablation morphologies and combining experiments with numerical modelling, the underlying mechanisms and the optimal conditions for paint removal by laser ablation are thoroughly investigated. Our studies suggest that laser paint removal is dominated by the laser vaporization effect, thermal stress effect and laser plasma effect, in which thermal stress effect is the most favoured while laser plasma effect should be avoided during removal operations. Based on the thermodynamic equations, we numerically evaluated the spatial distribution of the temperature as well as thermal stress in the paint and substrate under the irradiation of laser pulse at 1064 nm. The obtained curves of the paint thickness vs. threshold fluences can provide the reference standard of laser parameter selection in view of the paint layer with different thickness. A multi-pulse model is proposed and validated under a constant laser fluence to perfectly remove a thicker paint layer. The investigations and the methods proposed here might give hints to the efficient operations on the paint removal and lowering the risk of substrate damages.

Characterization of Residual Stress Effects on Fatigue Crack Growth of a Friction Stir Welded Aluminum Alloy

NASA Technical Reports Server (NTRS)

Newman, John A.; Smith, Stephen W.; Seshadri, Banavara R.; James, Mark A.; Brazill, Richard L.; Schultz, Robert W.; Donald, J. Keith; Blair, Amy

2015-01-01

An on-line compliance-based method to account for residual stress effects in stress-intensity factor and fatigue crack growth property determinations has been evaluated. Residual stress intensity factor results determined from specimens containing friction stir weld induced residual stresses are presented, and the on-line method results were found to be in excellent agreement with residual stress-intensity factor data obtained using the cut compliance method. Variable stress-intensity factor tests were designed to demonstrate that a simple superposition model, summing the applied stress-intensity factor with the residual stress-intensity factor, can be used to determine the total crack-tip stress-intensity factor. Finite element, VCCT (virtual crack closure technique), and J-integral analysis methods have been used to characterize weld-induced residual stress using thermal expansion/contraction in the form of an equivalent delta T (change in local temperature during welding) to simulate the welding process. This equivalent delta T was established and applied to analyze different specimen configurations to predict residual stress distributions and associated residual stress-intensity factor values. The predictions were found to agree well with experimental results obtained using the crack- and cut-compliance methods.