Automatic rendezvous and docking systems functional and performance requirements

NASA Technical Reports Server (NTRS)

1985-01-01

A generalized mission design scheme which utilizes a standard mission profile for all OMV rendezvous operations, recognizes typical operational constraints, and minimizes propellant penalties due to nodal regression effects was developed. This scheme has been used to demonstrate a unified guidance and navigation maneuver processor (the UMP), which supports all mission phases through station-keeping. The initial demonstration version of the Orbital Rendezvous Mission Planner (ORMP) was provided for evaluation purposes, and program operation was discussed.

Factors Affecting Leave out of General Practitioners from Rural Family Physician Program: A Case of Kerman, Iran

PubMed Central

Amiresmaili, Mohammadreza; Khosravi, Sajad; Feyzabadi, Vahid Yazdi

2014-01-01

Background: Rural family physician program as the new reform in the Iranian health system has been implemented since 2005. Its success depends much on physicians’ retention. The present study aimed to identify influential factors on physicians’ willingness to leave out this program in Kerman province. Methods: The present cross-sectional study was performed in Kerman province in 2011. All family physicians working in this program (n = 271) were studied using a questionnaire. Data analysis was carried out using descriptive statistics and logistic regression through SPSS version 18.0. Results: Twenty-six percent (70) of the physicians had left out the program in the past. In addition, 77.3% (208) intended to leave out in the near future. Opportunity for continuing education, inappropriate and long working hours, unsuitable requirements of salary, irregular payments, lack of job security and high working responsibility were regarded as the most important reasons for leaving out the program in the past and intention to leave out in future orderly. According to univariate logistic regression, younger physicians (odds ratio [OR] =2.479; 95% confidence interval [CI]: 1.261-4.872) and physicians who had older children (OR = 4.743; 95% CI: 1.441-15.607) were more willing to leave out the plan in the near future, however it was not significant in multivariate logistic regression. Conclusions: Physician retention in family physician program is faced with serious doubts due to different reasons. The success of the program is endangered because of the pivotal role of human resources. Hence, the revision of human resources policies of the program seems necessary in order to reduce physicians leave out and improving its effectiveness. PMID:25400891

STEP and STEPSPL: Computer programs for aerodynamic model structure determination and parameter estimation

NASA Technical Reports Server (NTRS)

Batterson, J. G.

1986-01-01

The successful parametric modeling of the aerodynamics for an airplane operating at high angles of attack or sideslip is performed in two phases. First the aerodynamic model structure must be determined and second the associated aerodynamic parameters (stability and control derivatives) must be estimated for that model. The purpose of this paper is to document two versions of a stepwise regression computer program which were developed for the determination of airplane aerodynamic model structure and to provide two examples of their use on computer generated data. References are provided for the application of the programs to real flight data. The two computer programs that are the subject of this report, STEP and STEPSPL, are written in FORTRAN IV (ANSI l966) compatible with a CDC FTN4 compiler. Both programs are adaptations of a standard forward stepwise regression algorithm. The purpose of the adaptation is to facilitate the selection of a adequate mathematical model of the aerodynamic force and moment coefficients of an airplane from flight test data. The major difference between STEP and STEPSPL is in the basis for the model. The basis for the model in STEP is the standard polynomial Taylor's series expansion of the aerodynamic function about some steady-state trim condition. Program STEPSPL utilizes a set of spline basis functions.

A computer-based instrumentation system for measurement of breath-by-breath oxygen consumption and carbon dioxide production.

PubMed

Sharma, C; Gallagher, R R

1994-01-01

Improvements are implemented (Version 4) in a Computer-Based Respiratory Measurement System (CBRMS) identified as Version 3. The programming language has been changed from Pascal to C. A Gateway 2000 desktop computer with 486 DX2/50MHz CPU and a plug-in data I/O board (KEITHLEY METRABYTE/ASYST/DAC's DAS-HRES 16-bit Analog and Digital I/O board) replaces an HP 9836 system used in Version 3. The breath-by-breath system consists of a mass spectrometer for measuring fractional concentrations of oxygen and carbon dioxide and the accommodation of a turbine or pneumotachometer for measuring inspiratory and expiratory flows. The temperature of the inspiratory and expiratory gases can be monitored if temperature corrections are necessary for the flow measurement device. These signals are presented to the PC via the data acquisition module. To compare the two Versions, ten significant respiratory parameters were investigated and compared for physiological resting states and steady states obtained during an exercise forcing. Both graphical and statistical (analysis of variance, regression, and correlation) tests were carried out on the data. The results from the two versions compared well for all ten parameters. Also, no evidence of a statistically significant difference was found between the resting and steady-state results of the present CBRMS (Version 4) and the previous CBRMS (Version 3). This evidence suggests that Version 3 (Pascal) has been successfully converted to Version 4 (C). Implementation of the CBRMS in C on a PC has several advantages.(ABSTRACT TRUNCATED AT 250 WORDS)

The predictive information obtained by testing multiple software versions

NASA Technical Reports Server (NTRS)

Lee, Larry D.

1987-01-01

Multiversion programming is a redundancy approach to developing highly reliable software. In applications of this method, two or more versions of a program are developed independently by different programmers and the versions are combined to form a redundant system. One variation of this approach consists of developing a set of n program versions and testing the versions to predict the failure probability of a particular program or a system formed from a subset of the programs. The precision that might be obtained, and also the effect of programmer variability if predictions are made over repetitions of the process of generating different program versions, are examined.

Prediction of unwanted pregnancies using logistic regression, probit regression and discriminant analysis

PubMed Central

Ebrahimzadeh, Farzad; Hajizadeh, Ebrahim; Vahabi, Nasim; Almasian, Mohammad; Bakhteyar, Katayoon

2015-01-01

Background: Unwanted pregnancy not intended by at least one of the parents has undesirable consequences for the family and the society. In the present study, three classification models were used and compared to predict unwanted pregnancies in an urban population. Methods: In this cross-sectional study, 887 pregnant mothers referring to health centers in Khorramabad, Iran, in 2012 were selected by the stratified and cluster sampling; relevant variables were measured and for prediction of unwanted pregnancy, logistic regression, discriminant analysis, and probit regression models and SPSS software version 21 were used. To compare these models, indicators such as sensitivity, specificity, the area under the ROC curve, and the percentage of correct predictions were used. Results: The prevalence of unwanted pregnancies was 25.3%. The logistic and probit regression models indicated that parity and pregnancy spacing, contraceptive methods, household income and number of living male children were related to unwanted pregnancy. The performance of the models based on the area under the ROC curve was 0.735, 0.733, and 0.680 for logistic regression, probit regression, and linear discriminant analysis, respectively. Conclusion: Given the relatively high prevalence of unwanted pregnancies in Khorramabad, it seems necessary to revise family planning programs. Despite the similar accuracy of the models, if the researcher is interested in the interpretability of the results, the use of the logistic regression model is recommended. PMID:26793655

Prediction of unwanted pregnancies using logistic regression, probit regression and discriminant analysis.

PubMed

Ebrahimzadeh, Farzad; Hajizadeh, Ebrahim; Vahabi, Nasim; Almasian, Mohammad; Bakhteyar, Katayoon

2015-01-01

Unwanted pregnancy not intended by at least one of the parents has undesirable consequences for the family and the society. In the present study, three classification models were used and compared to predict unwanted pregnancies in an urban population. In this cross-sectional study, 887 pregnant mothers referring to health centers in Khorramabad, Iran, in 2012 were selected by the stratified and cluster sampling; relevant variables were measured and for prediction of unwanted pregnancy, logistic regression, discriminant analysis, and probit regression models and SPSS software version 21 were used. To compare these models, indicators such as sensitivity, specificity, the area under the ROC curve, and the percentage of correct predictions were used. The prevalence of unwanted pregnancies was 25.3%. The logistic and probit regression models indicated that parity and pregnancy spacing, contraceptive methods, household income and number of living male children were related to unwanted pregnancy. The performance of the models based on the area under the ROC curve was 0.735, 0.733, and 0.680 for logistic regression, probit regression, and linear discriminant analysis, respectively. Given the relatively high prevalence of unwanted pregnancies in Khorramabad, it seems necessary to revise family planning programs. Despite the similar accuracy of the models, if the researcher is interested in the interpretability of the results, the use of the logistic regression model is recommended.

Computer program for the computation of total sediment discharge by the modified Einstein procedure

USGS Publications Warehouse

Stevens, H.H.

1985-01-01

Two versions of a computer program to compute total sediment discharge by the modified Einstein procedure are presented. The FORTRAN 77 language version is for use on the PRIME computer, and the BASIC language version is for use on most microcomputers. The program contains built-in limitations and input-output options that closely follow the original modified Einstein procedure. Program documentation and listings of both versions of the program are included. (USGS)

DNAStat, version 2.1--a computer program for processing genetic profile databases and biostatistical calculations.

PubMed

Berent, Jarosław

2010-01-01

This paper presents the new DNAStat version 2.1 for processing genetic profile databases and biostatistical calculations. The popularization of DNA studies employed in the judicial system has led to the necessity of developing appropriate computer programs. Such programs must, above all, address two critical problems, i.e. the broadly understood data processing and data storage, and biostatistical calculations. Moreover, in case of terrorist attacks and mass natural disasters, the ability to identify victims by searching related individuals is very important. DNAStat version 2.1 is an adequate program for such purposes. The DNAStat version 1.0 was launched in 2005. In 2006, the program was updated to 1.1 and 1.2 versions. There were, however, slight differences between those versions and the original one. The DNAStat version 2.0 was launched in 2007 and the major program improvement was an introduction of the group calculation options with the potential application to personal identification of mass disasters and terrorism victims. The last 2.1 version has the option of language selection--Polish or English, which will enhance the usage and application of the program also in other countries.

Parallel computation for biological sequence comparison: comparing a portable model to the native model for the Intel Hypercube.

PubMed

Nadkarni, P M; Miller, P L

1991-01-01

A parallel program for inter-database sequence comparison was developed on the Intel Hypercube using two models of parallel programming. One version was built using machine-specific Hypercube parallel programming commands. The other version was built using Linda, a machine-independent parallel programming language. The two versions of the program provide a case study comparing these two approaches to parallelization in an important biological application area. Benchmark tests with both programs gave comparable results with a small number of processors. As the number of processors was increased, the Linda version was somewhat less efficient. The Linda version was also run without change on Network Linda, a virtual parallel machine running on a network of desktop workstations.

Parallel computation for biological sequence comparison: comparing a portable model to the native model for the Intel Hypercube.

PubMed Central

Nadkarni, P. M.; Miller, P. L.

1991-01-01

A parallel program for inter-database sequence comparison was developed on the Intel Hypercube using two models of parallel programming. One version was built using machine-specific Hypercube parallel programming commands. The other version was built using Linda, a machine-independent parallel programming language. The two versions of the program provide a case study comparing these two approaches to parallelization in an important biological application area. Benchmark tests with both programs gave comparable results with a small number of processors. As the number of processors was increased, the Linda version was somewhat less efficient. The Linda version was also run without change on Network Linda, a virtual parallel machine running on a network of desktop workstations. PMID:1807632

Modified SEAGULL

NASA Technical Reports Server (NTRS)

Salas, M. D.; Kuehn, M. S.

1994-01-01

Original version of program incorporated into program SRGULL (LEW-15093) for use on National Aero-Space Plane project, its duty being to model forebody, inlet, and nozzle portions of vehicle. However, real-gas chemistry effects in hypersonic flow fields limited accuracy of that version, because it assumed perfect-gas properties. As a result, SEAGULL modified according to real-gas equilibrium-chemistry methodology. This program analyzes two-dimensional, hypersonic flows of real gases. Modified version of SEAGULL maintains as much of original program as possible, and retains ability to execute original perfect-gas version.

Computer programs for computing particle-size statistics of fluvial sediments

USGS Publications Warehouse

Stevens, H.H.; Hubbell, D.W.

1986-01-01

Two versions of computer programs for inputing data and computing particle-size statistics of fluvial sediments are presented. The FORTRAN 77 language versions are for use on the Prime computer, and the BASIC language versions are for use on microcomputers. The size-statistics program compute Inman, Trask , and Folk statistical parameters from phi values and sizes determined for 10 specified percent-finer values from inputed size and percent-finer data. The program also determines the percentage gravel, sand, silt, and clay, and the Meyer-Peter effective diameter. Documentation and listings for both versions of the programs are included. (Author 's abstract)

NITPICK: peak identification for mass spectrometry data

PubMed Central

Renard, Bernhard Y; Kirchner, Marc; Steen , Hanno; Steen, Judith AJ; Hamprecht , Fred A

2008-01-01

Background The reliable extraction of features from mass spectra is a fundamental step in the automated analysis of proteomic mass spectrometry (MS) experiments. Results This contribution proposes a sparse template regression approach to peak picking called NITPICK. NITPICK is a Non-greedy, Iterative Template-based peak PICKer that deconvolves complex overlapping isotope distributions in multicomponent mass spectra. NITPICK is based on fractional averagine, a novel extension to Senko's well-known averagine model, and on a modified version of sparse, non-negative least angle regression, for which a suitable, statistically motivated early stopping criterion has been derived. The strength of NITPICK is the deconvolution of overlapping mixture mass spectra. Conclusion Extensive comparative evaluation has been carried out and results are provided for simulated and real-world data sets. NITPICK outperforms pepex, to date the only alternate, publicly available, non-greedy feature extraction routine. NITPICK is available as software package for the R programming language and can be downloaded from . PMID:18755032

75 FR 38026 - Medicare Program; Identification of Backward Compatible Version of Adopted Standard for E...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-01

... Programs (NCPDP) Prescriber/ Pharmacist Interface SCRIPT standard, Implementation Guide, Version 10... Prescriber/Pharmacist Interface SCRIPT standard, Version 8, Release 1 and its equivalent NCPDP Prescriber/Pharmacist Interface SCRIPT Implementation Guide, Version 8, Release 1 (hereinafter referred to as the...

Production version of the extended NASA-Langley Vortex Lattice FORTRAN computer program. Volume 1: User's guide

NASA Technical Reports Server (NTRS)

Lamar, J. E.; Herbert, H. E.

1982-01-01

The latest production version, MARK IV, of the NASA-Langley vortex lattice computer program is summarized. All viable subcritical aerodynamic features of previous versions were retained. This version extends the previously documented program capabilities to four planforms, 400 panels, and enables the user to obtain vortex-flow aerodynamics on cambered planforms, flowfield properties off the configuration in attached flow, and planform longitudinal load distributions.

Estimation of Standard Error of Regression Effects in Latent Regression Models Using Binder's Linearization. Research Report. ETS RR-07-09

ERIC Educational Resources Information Center

Li, Deping; Oranje, Andreas

2007-01-01

Two versions of a general method for approximating standard error of regression effect estimates within an IRT-based latent regression model are compared. The general method is based on Binder's (1983) approach, accounting for complex samples and finite populations by Taylor series linearization. In contrast, the current National Assessment of…

Multithreaded transactions in scientific computing: New versions of a computer program for kinematical calculations of RHEED intensity oscillations

NASA Astrophysics Data System (ADS)

Brzuszek, Marcin; Daniluk, Andrzej

2006-11-01

Writing a concurrent program can be more difficult than writing a sequential program. Programmer needs to think about synchronisation, race conditions and shared variables. Transactions help reduce the inconvenience of using threads. A transaction is an abstraction, which allows programmers to group a sequence of actions on the program into a logical, higher-level computation unit. This paper presents multithreaded versions of the GROWTH program, which allow to calculate the layer coverages during the growth of thin epitaxial films and the corresponding RHEED intensities according to the kinematical approximation. The presented programs also contain graphical user interfaces, which enable displaying program data at run-time. New version program summaryTitles of programs:GROWTHGr, GROWTH06 Catalogue identifier:ADVL_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADVL_v2_0 Program obtainable from:CPC Program Library, Queen's University of Belfast, N. Ireland Catalogue identifier of previous version:ADVL Does the new version supersede the original program:No Computer for which the new version is designed and others on which it has been tested: Pentium-based PC Operating systems or monitors under which the new version has been tested: Windows 9x, XP, NT Programming language used:Object Pascal Memory required to execute with typical data:More than 1 MB Number of bits in a word:64 bits Number of processors used:1 No. of lines in distributed program, including test data, etc.:20 931 Number of bytes in distributed program, including test data, etc.: 1 311 268 Distribution format:tar.gz Nature of physical problem: The programs compute the RHEED intensities during the growth of thin epitaxial structures prepared using the molecular beam epitaxy (MBE). The computations are based on the use of kinematical diffraction theory [P.I. Cohen, G.S. Petrich, P.R. Pukite, G.J. Whaley, A.S. Arrott, Surf. Sci. 216 (1989) 222. [1

Detection of faults and software reliability analysis

NASA Technical Reports Server (NTRS)

Knight, John C.

1987-01-01

Multi-version or N-version programming is proposed as a method of providing fault tolerance in software. The approach requires the separate, independent preparation of multiple versions of a piece of software for some application. These versions are executed in parallel in the application environment; each receives identical inputs and each produces its version of the required outputs. The outputs are collected by a voter and, in principle, they should all be the same. In practice there may be some disagreement. If this occurs, the results of the majority are taken to be the correct output, and that is the output used by the system. A total of 27 programs were produced. Each of these programs was then subjected to one million randomly-generated test cases. The experiment yielded a number of programs containing faults that are useful for general studies of software reliability as well as studies of N-version programming. Fault tolerance through data diversity and analytic models of comparison testing are discussed.

Trace contaminant control simulation computer program, version 8.1

NASA Technical Reports Server (NTRS)

Perry, J. L.

1994-01-01

The Trace Contaminant Control Simulation computer program is a tool for assessing the performance of various process technologies for removing trace chemical contamination from a spacecraft cabin atmosphere. Included in the simulation are chemical and physical adsorption by activated charcoal, chemical adsorption by lithium hydroxide, absorption by humidity condensate, and low- and high-temperature catalytic oxidation. Means are provided for simulating regenerable as well as nonregenerable systems. The program provides an overall mass balance of chemical contaminants in a spacecraft cabin given specified generation rates. Removal rates are based on device flow rates specified by the user and calculated removal efficiencies based on cabin concentration and removal technology experimental data. Versions 1.0 through 8.0 are documented in NASA TM-108409. TM-108409 also contains a source file listing for version 8.0. Changes to version 8.0 are documented in this technical memorandum and a source file listing for the modified version, version 8.1, is provided. Detailed descriptions for the computer program subprograms are extracted from TM-108409 and modified as necessary to reflect version 8.1. Version 8.1 supersedes version 8.0. Information on a separate user's guide is available from the author.

USSAERO computer program development, versions B and C

NASA Technical Reports Server (NTRS)

Woodward, F. A.

1980-01-01

Versions B and C of the unified subsonic and supersonic aerodynamic analysis program, USSAERO, are described. Version B incorporates a new symmetrical singularity method to provide improved surface pressure distributions on wings in subsonic flow. Version C extends the range of application of the program to include the analysis of multiple engine nacelles or finned external stores. In addition, nonlinear compressibility effects in high subsonic and supersonic flows are approximated using a correction based on the local Mach number at panel control points. Several examples are presented comparing the results of these programs with other panel methods and experimental data.

COSMIC monthly progress report

NASA Technical Reports Server (NTRS)

1993-01-01

Activities of the Computer Software Management and Information Center (COSMIC) are summarized for the month of August, 1993. Tables showing the current inventory of programs available from COSMIC are presented and program processing and evaluation activities are discussed. Ten articles were prepared for publication in the NASA Tech Brief Journal. These articles (included in this report) describe the following software items: (1) MOM3D - A Method of Moments Code for Electromagnetic Scattering (UNIX Version); (2) EM-Animate - Computer Program for Displaying and Animating the Steady-State Time-Harmonic Electromagnetic Near Field and Surface-Current Solutions; (3) MOM3D - A Method of Moments Code for Electromagnetic Scattering (IBM PC Version); (4) M414 - MIL-STD-414 Variable Sampling Procedures Computer Program; (5) MEDOF - Minimum Euclidean Distance Optimal Filter; (6) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (Macintosh Version); (7) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (IBM PC Version); (8) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (UNIX Version); (9) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (DEC VAX VMS Version); and (10) TFSSRA - Thick Frequency Selective Surface with Rectangular Apertures. Activities in the areas of marketing, customer service, benefits identification, maintenance and support, and dissemination are also described along with a budget summary.

Comparison between Linear and Nonlinear Regression in a Laboratory Heat Transfer Experiment

ERIC Educational Resources Information Center

Gonçalves, Carine Messias; Schwaab, Marcio; Pinto, José Carlos

2013-01-01

In order to interpret laboratory experimental data, undergraduate students are used to perform linear regression through linearized versions of nonlinear models. However, the use of linearized models can lead to statistically biased parameter estimates. Even so, it is not an easy task to introduce nonlinear regression and show for the students…

Modifications of the IBM personal computer synchronous communications support programs for use with the Multics

USGS Publications Warehouse

Kork, John O.

1983-01-01

Version 1.00 of the Asynchronous Communications Support supplied with the IBM Personal Computer must be modified to be used for communications with Multics. Version 2.00 can be used as supplied, but error checking and screen printing capabilities can be added by using modifications very similar to those required for Version 1.00. This paper describes and lists required programs on Multics and appropriate modifications to both Versions 1.00 and 2.00 of the programs supplied by IBM.

Superquantile/CVaR Risk Measures: Second-Order Theory

DTIC Science & Technology

2014-07-17

order version of quantile regression . Keywords: superquantiles, conditional value-at-risk, second-order superquantiles, mixed superquan- tiles... quantile regression . 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT Same as Report (SAR) 18. NUMBER OF PAGES 26 19a...second-order superquantiles is in the domain of generalized regression . We laid out in [16] a parallel methodology to that of quantile regression

Interactive Computer-Supported Learning in Mathematics: A Comparison of Three Learning Programs on Trigonometry

ERIC Educational Resources Information Center

Sander, Elisabeth; Heiß, Andrea

2014-01-01

Three different versions of a learning program on trigonometry were compared, a program controlled, non-interactive version (CG), an interactive, conflict inducing version (EG 1), and an interactive one which was supposed to reduce the occurrence of a cognitive conflict regarding the central problem solution (EG 2). Pupils (N = 101) of a…

The incorporation of plotting capability into the Unified Subsonic Supersonic Aerodynamic Analysis program, version B

NASA Technical Reports Server (NTRS)

Winter, O. A.

1980-01-01

The B01 version of the United Subsonic Supersonic Aerodynamic Analysis program is the result of numerous modifications and additions made to the B00 version. These modifications and additions affect the program input, its computational options, the code readability, and the overlay structure. The following are described: (1) the revised input; (2) the plotting overlay programs which were also modified, and their associated subroutines, (3) the auxillary files used by the program, the revised output data; and (4) the program overlay structure.

Preliminary evidence for good psychometric properties of the Norwegian version of the Brief Problems Monitor (BPM).

PubMed

Richter, Jörg

2015-04-01

Methods to assess intervention progress and outcome for frequent use are needed. To provide preliminary information about psychometric properties for the Norwegian version of the Brief Problems Monitor. Cronbach's alpha scores and intra-class correlation coefficients as indicators for internal consistency (reliability) and Pearson correlation coefficients between corresponding subscales of the long and short ASEBA form versions as well as multiple regression coefficients to explore the predictive power of the reduced item-set related to the corresponding scale-scores of the long version were calculated in large, representative data sets of Norwegian children and adolescents. Cronbach's alpha scores of the Norwegian version of the BPM subscales varied between 0.67 (attention BPM-youth) and 0.88 (attention BPM-teacher) and between 0.90 (BPM-youth) and 0.96 (BPM-teacher) for its total problem score. Corresponding subscales from the long versions and the BPM as well as the total problems scores were closely correlated with coefficients of high effect size (all r > 0.80). The variance of the items of the BPM explained about three-quarters or more of the variance in the corresponding subscales of the long version. The Norwegian BPM has good psychometric properties in terms of 1) being acceptable to good internal consistency and in terms of 2) regression coefficients of high effect size from the BPM items to the problem-scale scores of the long versions as validity indicators. Its use in clinical practice and research can be recommended.

WTAQ version 2-A computer program for analysis of aquifer tests in confined and water-table aquifers with alternative representations of drainage from the unsaturated zone

USGS Publications Warehouse

Barlow, Paul M.; Moench, Allen F.

2011-01-01

The computer program WTAQ simulates axial-symmetric flow to a well pumping from a confined or unconfined (water-table) aquifer. WTAQ calculates dimensionless or dimensional drawdowns that can be used with measured drawdown data from aquifer tests to estimate aquifer hydraulic properties. Version 2 of the program, which is described in this report, provides an alternative analytical representation of drainage to water-table aquifers from the unsaturated zone than that which was available in the initial versions of the code. The revised drainage model explicitly accounts for hydraulic characteristics of the unsaturated zone, specifically, the moisture retention and relative hydraulic conductivity of the soil. The revised program also retains the original conceptualizations of drainage from the unsaturated zone that were available with version 1 of the program to provide alternative approaches to simulate the drainage process. Version 2 of the program includes all other simulation capabilities of the first versions, including partial penetration of the pumped well and of observation wells and piezometers, well-bore storage and skin effects at the pumped well, and delayed drawdown response of observation wells and piezometers.

HYPERDIRE-HYPERgeometric functions DIfferential REduction: Mathematica-based packages for the differential reduction of generalized hypergeometric functions: Lauricella function FC of three variables

NASA Astrophysics Data System (ADS)

Bytev, Vladimir V.; Kniehl, Bernd A.

2016-09-01

We present a further extension of the HYPERDIRE project, which is devoted to the creation of a set of Mathematica-based program packages for manipulations with Horn-type hypergeometric functions on the basis of differential equations. Specifically, we present the implementation of the differential reduction for the Lauricella function FC of three variables. Catalogue identifier: AEPP_v4_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEPP_v4_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 243461 No. of bytes in distributed program, including test data, etc.: 61610782 Distribution format: tar.gz Programming language: Mathematica. Computer: All computers running Mathematica. Operating system: Operating systems running Mathematica. Classification: 4.4. Does the new version supersede the previous version?: No, it significantly extends the previous version. Nature of problem: Reduction of hypergeometric function FC of three variables to a set of basis functions. Solution method: Differential reduction. Reasons for new version: The extension package allows the user to handle the Lauricella function FC of three variables. Summary of revisions: The previous version goes unchanged. Running time: Depends on the complexity of the problem.

The impact of a livelihood program on depressive symptoms among people living with HIV in Cambodia.

PubMed

Shimizu, Mayumi; Yi, Siyan; Tuot, Sovannary; Suong, Samedy; Sron, Samrithea; Shibanuma, Akira; Jimba, Masamine

2016-01-01

Psychological and social problems are major concerns in this era of successful antiretroviral therapy. Although livelihood programs have been implemented extensively to improve the daily living conditions of people living with HIV in Cambodia, no studies have yet investigated the impacts of these programs on the mental health of this vulnerable population. Therefore, we examined the impact of a livelihood program on depressive symptoms and associated factors among people living with HIV in Cambodia. A quasi-experimental, nonequivalent comparison group study was conducted in six provinces of Cambodia in 2014. Data were collected from an intervention group comprising 357 people living with HIV who had participated in the livelihood program and a comparison group comprising 328 people living with HIV who had not participated in this program. Multiple logistic regression analysis was carried out to examine the association between livelihood-program participation and depressive symptoms as measured by the depressive symptoms subscale of the 25-item Cambodian version of the Hopkins Symptom Checklist. A propensity score matching was used to examine the effect of the livelihood program on depressive symptoms while controlling for selection bias. Overall, 56.0% and 62.7% of the participants in the intervention and comparison groups, respectively, met the Hopkins Symptom Checklist threshold for depressive symptoms. The multiple logistic regression analysis showed that the participants in the intervention group had significantly lower odds of having depressive symptoms (adjusted odds ratio 0.68, 95% confidence interval 0.52-0.88). The analysis from propensity score matching indicated that the livelihood program helped mitigate depressive symptoms among the participants in the intervention group (T=-1.99). The livelihood program appeared to help mitigate the burden of depressive symptoms among people living with HIV in Cambodia. Thus, this program should be scaled up and modified to better improve participants' mental health.

Mediating Role of Psychological Capital in Relationship between Occupational Stress and Turnover Intention among Nurses at Veterans Administration Hospitals in Korea.

PubMed

Yim, Hee-Yun; Seo, Hyun-Ju; Cho, Yoonhyung; Kim, JinHee

2017-03-01

The aim of this study was to evaluate the mediating role of psychological capital (PCP) in the relationship between occupational stress and turnover intention in nurses. Data were collected from a sample of 447 nurses working at four Veterans Administration Hospitals throughout South Korea from July 1 to July 31, 2014. We collected data from the nurses using the following surveys: the Short Form Korean-Occupational Stress Scale, the Korean version of the Turnover Intention Scale, and the Korean version of the Psychological Capital Questionnaire. Multiple linear regression analysis was performed to examine the mediating role of PCP. The level of occupational stress was 1.81 ± 0.23, the level of turnover intention was 3.29 ± 0.86, and the PCP level was 3.95 ± 0.52. There were significant correlations among the three variables (occupational stress, turnover intention, and PCP). PCP played a partial mediating role (β=-0.22, p=.008) in the relationship between occupational stress and turnover intention (p<.001) among nurses working at the Veterans Administration Hospitals. Based on the findings of this study, we recommend that South Korean hospitals offer occupational stress management programs that incorporate relevant programs in efforts to strengthen the overall components of PCP among nurses to reduce turnover intentions. Further studies are required to determine the most effective intervention programs for hospital settings. Copyright © 2017. Published by Elsevier B.V.

A new version of Visual tool for estimating the fractal dimension of images

NASA Astrophysics Data System (ADS)

Grossu, I. V.; Felea, D.; Besliu, C.; Jipa, Al.; Bordeianu, C. C.; Stan, E.; Esanu, T.

2010-04-01

This work presents a new version of a Visual Basic 6.0 application for estimating the fractal dimension of images (Grossu et al., 2009 [1]). The earlier version was limited to bi-dimensional sets of points, stored in bitmap files. The application was extended for working also with comma separated values files and three-dimensional images. New version program summaryProgram title: Fractal Analysis v02 Catalogue identifier: AEEG_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEG_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 9999 No. of bytes in distributed program, including test data, etc.: 4 366 783 Distribution format: tar.gz Programming language: MS Visual Basic 6.0 Computer: PC Operating system: MS Windows 98 or later RAM: 30 M Classification: 14 Catalogue identifier of previous version: AEEG_v1_0 Journal reference of previous version: Comput. Phys. Comm. 180 (2009) 1999 Does the new version supersede the previous version?: Yes Nature of problem: Estimating the fractal dimension of 2D and 3D images. Solution method: Optimized implementation of the box-counting algorithm. Reasons for new version:The previous version was limited to bitmap image files. The new application was extended in order to work with objects stored in comma separated values (csv) files. The main advantages are: Easier integration with other applications (csv is a widely used, simple text file format); Less resources consumed and improved performance (only the information of interest, the "black points", are stored); Higher resolution (the points coordinates are loaded into Visual Basic double variables [2]); Possibility of storing three-dimensional objects (e.g. the 3D Sierpinski gasket). In this version the optimized box-counting algorithm [1] was extended to the three-dimensional case. Summary of revisions:The application interface was changed from SDI (single document interface) to MDI (multi-document interface). One form was added in order to provide a graphical user interface for the new functionalities (fractal analysis of 2D and 3D images stored in csv files). Additional comments: User friendly graphical interface; Easy deployment mechanism. Running time: In the first approximation, the algorithm is linear. References:[1] I.V. Grossu, C. Besliu, M.V. Rusu, Al. Jipa, C.C. Bordeianu, D. Felea, Comput. Phys. Comm. 180 (2009) 1999-2001.[2] F. Balena, Programming Microsoft Visual Basic 6.0, Microsoft Press, US, 1999.

NITPICK: peak identification for mass spectrometry data.

PubMed

Renard, Bernhard Y; Kirchner, Marc; Steen, Hanno; Steen, Judith A J; Hamprecht, Fred A

2008-08-28

The reliable extraction of features from mass spectra is a fundamental step in the automated analysis of proteomic mass spectrometry (MS) experiments. This contribution proposes a sparse template regression approach to peak picking called NITPICK. NITPICK is a Non-greedy, Iterative Template-based peak PICKer that deconvolves complex overlapping isotope distributions in multicomponent mass spectra. NITPICK is based on fractional averaging, a novel extension to Senko's well-known averaging model, and on a modified version of sparse, non-negative least angle regression, for which a suitable, statistically motivated early stopping criterion has been derived. The strength of NITPICK is the deconvolution of overlapping mixture mass spectra. Extensive comparative evaluation has been carried out and results are provided for simulated and real-world data sets. NITPICK outperforms pepex, to date the only alternate, publicly available, non-greedy feature extraction routine. NITPICK is available as software package for the R programming language and can be downloaded from (http://hci.iwr.uni-heidelberg.de/mip/proteomics/).

Cascade Optimization for Aircraft Engines With Regression and Neural Network Analysis - Approximators

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Guptill, James D.; Hopkins, Dale A.; Lavelle, Thomas M.

2000-01-01

The NASA Engine Performance Program (NEPP) can configure and analyze almost any type of gas turbine engine that can be generated through the interconnection of a set of standard physical components. In addition, the code can optimize engine performance by changing adjustable variables under a set of constraints. However, for engine cycle problems at certain operating points, the NEPP code can encounter difficulties: nonconvergence in the currently implemented Powell's optimization algorithm and deficiencies in the Newton-Raphson solver during engine balancing. A project was undertaken to correct these deficiencies. Nonconvergence was avoided through a cascade optimization strategy, and deficiencies associated with engine balancing were eliminated through neural network and linear regression methods. An approximation-interspersed cascade strategy was used to optimize the engine's operation over its flight envelope. Replacement of Powell's algorithm by the cascade strategy improved the optimization segment of the NEPP code. The performance of the linear regression and neural network methods as alternative engine analyzers was found to be satisfactory. This report considers two examples-a supersonic mixed-flow turbofan engine and a subsonic waverotor-topped engine-to illustrate the results, and it discusses insights gained from the improved version of the NEPP code.

Program CALIB. [for computing noise levels for helicopter version of S-191 filter wheel spectrometer

NASA Technical Reports Server (NTRS)

Mendlowitz, M. A.

1973-01-01

The program CALIB, which was written to compute noise levels and average signal levels of aperture radiance for the helicopter version of the S-191 filter wheel spectrometer is described. The program functions, and input description are included along with a compiled program listing.

STAR adaptation of QR algorithm. [program for solving over-determined systems of linear equations

NASA Technical Reports Server (NTRS)

Shah, S. N.

1981-01-01

The QR algorithm used on a serial computer and executed on the Control Data Corporation 6000 Computer was adapted to execute efficiently on the Control Data STAR-100 computer. How the scalar program was adapted for the STAR-100 and why these adaptations yielded an efficient STAR program is described. Program listings of the old scalar version and the vectorized SL/1 version are presented in the appendices. Execution times for the two versions applied to the same system of linear equations, are compared.

PROLOG to the Future: A Glimpse of Things to Come in Artificial Intelligence.

ERIC Educational Resources Information Center

Herther, Nancy K.

1986-01-01

Briefly introduces the programming languages of artificial intelligence and presents information on some of the new versions of these languages available for microcomputers. A tutorial for PROLOG-86, a new microcomputer version of PROLOG, is given. Information on other microcomputer versions of these programs and a bibliography are included.…

Potential youth exposure to alcohol advertising on the internet: A study of internet versions of popular television programs.

PubMed

Siegel, Michael; Kurland, Rachel P; Castrini, Marisa; Morse, Catherine; de Groot, Alexander; Retamozo, Cynthia; Roberts, Sarah P; Ross, Craig S; Jernigan, David H

No previous paper has examined alcohol advertising on the internet versions of television programs popular among underage youth. To assess the volume of alcohol advertising on web sites of television networks which stream television programs popular among youth. Multiple viewers analyzed the product advertising appearing on 12 television programs that are available in full episode format on the internet. During a baseline period of one week, six coders analyzed all 12 programs. For the nine programs that contained alcohol advertising, three underage coders (ages 10, 13, and 18) analyzed the programs to quantify the extent of that advertising over a four-week period. Alcohol advertisements are highly prevalent on these programs, with nine of the 12 shows carrying alcohol ads, and six programs averaging at least one alcohol ad per episode. There was no difference in alcohol ad exposure for underage and legal age viewers. There is a substantial potential for youth exposure to alcohol advertising on the internet through internet-based versions of television programs. The Federal Trade Commission should require alcohol companies to report the underage youth and adult audiences for internet versions of television programs on which they advertise.

Predicting healthcare employees' participation in an office redesign program: attitudes, norms and behavioral control.

PubMed

Mohr, David C; VanDeusen Lukas, Carol; Meterko, Mark

2008-11-02

The study examined the extent to which components based on a modified version of the theory of planned behavior explained employee participation in a new clinical office program designed to reduce patient waiting times in primary care clinics. We regressed extent of employee participation on attitudes about the program, group norms, and perceived behavioral control along with individual and clinic characteristics using a hierarchical linear mixed model. Perceived group norms were one of the best predictors of employee participation. Attitudes about the program were also significant, but to a lesser degree. Behavioral control, however, was not a significant predictor. Respondents with at least one year of clinic tenure, or who were team leaders, first line supervisor, or managers had greater participation rates. Analysis at the clinic level indicated clinics with scores in the highest quartile clinic scores on group norms, attitudes, and behavioral control scores were significantly higher on levels of overall participation than clinics in the lowest quartile. Findings suggest that establishing strong norms and values may influence employee participation in a change program in a group setting. Supervisory level was also significant with greater responsibility being associated with greater participation.

Aircraft noise prediction program propeller analysis system IBM-PC version user's manual version 2.0

NASA Technical Reports Server (NTRS)

Nolan, Sandra K.

1988-01-01

The IBM-PC version of the Aircraft Noise Prediction Program (ANOPP) Propeller Analysis System (PAS) is a set of computational programs for predicting the aerodynamics, performance, and noise of propellers. The ANOPP-PAS is a subset of a larger version of ANOPP which can be executed on CDC or VAX computers. This manual provides a description of the IBM-PC version of the ANOPP-PAS and its prediction capabilities, and instructions on how to use the system on an IBM-XT or IBM-AT personal computer. Sections within the manual document installation, system design, ANOPP-PAS usage, data entry preprocessors, and ANOPP-PAS functional modules and procedures. Appendices to the manual include a glossary of ANOPP terms and information on error diagnostics and recovery techniques.

42 CFR 423.160 - Standards for electronic prescribing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Prescriber/Pharmacist Interface SCRIPT Standard, Implementation Guide, Version 8, Release 1, (Version 8.1... Prescriber/Pharmacist Interface SCRIPT Standard, Implementation Guide, Version 8, Release 1 (Version 8.1... Programs Prescriber/Pharmacist Interface SCRIPT Standard, Implementation Guide Version 8, Release 1...

Methods for Streamlining Intervention Fidelity Checklists: An Example from the Chronic Disease Self-Management Program

PubMed Central

Ahn, SangNam; Smith, Matthew Lee; Altpeter, Mary; Belza, Basia; Post, Lindsey; Ory, Marcia G.

2015-01-01

Maintaining intervention fidelity should be part of any programmatic quality assurance (QA) plan and is often a licensure requirement. However, fidelity checklists designed by original program developers are often lengthy, which makes compliance difficult once programs become widely disseminated in the field. As a case example, we used Stanford’s original Chronic Disease Self-Management Program (CDSMP) fidelity checklist of 157 items to demonstrate heuristic procedures for generating shorter fidelity checklists. Using an expert consensus approach, we sought feedback from active master trainers registered with the Stanford University Patient Education Research Center about which items were most essential to, and also feasible for, assessing fidelity. We conducted three sequential surveys and one expert group-teleconference call. Three versions of the fidelity checklist were created using different statistical and methodological criteria. In a final group-teleconference call with seven national experts, there was unanimous agreement that all three final versions (e.g., a 34-item version, a 20-item version, and a 12-item version) should be made available because the purpose and resources for administering a checklist might vary from one setting to another. This study highlights the methodology used to generate shorter versions of a fidelity checklist, which has potential to inform future QA efforts for this and other evidence-based programs (EBP) for older adults delivered in community settings. With CDSMP and other EBP, it is important to differentiate between program fidelity as mandated by program developers for licensure, and intervention fidelity tools for providing an “at-a-glance” snapshot of the level of compliance to selected program indicators. PMID:25964941

Program package for multicanonical simulations of U(1) lattice gauge theory-Second version

NASA Astrophysics Data System (ADS)

Bazavov, Alexei; Berg, Bernd A.

2013-03-01

A new version STMCMUCA_V1_1 of our program package is available. It eliminates compatibility problems of our Fortran 77 code, originally developed for the g77 compiler, with Fortran 90 and 95 compilers. New version program summaryProgram title: STMC_U1MUCA_v1_1 Catalogue identifier: AEET_v1_1 Licensing provisions: Standard CPC license, http://cpc.cs.qub.ac.uk/licence/licence.html Programming language: Fortran 77 compatible with Fortran 90 and 95 Computers: Any capable of compiling and executing Fortran code Operating systems: Any capable of compiling and executing Fortran code RAM: 10 MB and up depending on lattice size used No. of lines in distributed program, including test data, etc.: 15059 No. of bytes in distributed program, including test data, etc.: 215733 Keywords: Markov chain Monte Carlo, multicanonical, Wang-Landau recursion, Fortran, lattice gauge theory, U(1) gauge group, phase transitions of continuous systems Classification: 11.5 Catalogue identifier of previous version: AEET_v1_0 Journal Reference of previous version: Computer Physics Communications 180 (2009) 2339-2347 Does the new version supersede the previous version?: Yes Nature of problem: Efficient Markov chain Monte Carlo simulation of U(1) lattice gauge theory (or other continuous systems) close to its phase transition. Measurements and analysis of the action per plaquette, the specific heat, Polyakov loops and their structure factors. Solution method: Multicanonical simulations with an initial Wang-Landau recursion to determine suitable weight factors. Reweighting to physical values using logarithmic coding and calculating jackknife error bars. Reasons for the new version: The previous version was developed for the g77 compiler Fortran 77 version. Compiler errors were encountered with Fortran 90 and Fortran 95 compilers (specified below). Summary of revisions: epsilon=one/10**10 is replaced by epsilon/10.0D10 in the parameter statements of the subroutines u1_bmha.f, u1_mucabmha.f, u1wl_backup.f, u1wlread_backup.f of the folder Libs/U1_par. For the tested compilers script files are added in the folder ExampleRuns and readme.txt files are now provided in all subfolders of ExampleRuns. The gnuplot driver files produced by the routine hist_gnu.f of Libs/Fortran are adapted to syntax required by gnuplot version 4.0 and higher. Restrictions: Due to the use of explicit real*8 initialization the conversion into real*4 will require extra changes besides replacing the implicit.sta file by its real*4 version. Unusual features: The programs have to be compiled the script files like those contained in the folder ExampleRuns as explained in the original paper. Running time: The prepared test runs took up to 74 minutes to execute on a 2 GHz PC.

A users' guide to the trace contaminant control simulation computer program

NASA Technical Reports Server (NTRS)

Perry, J. L.

1994-01-01

The Trace Contaminant Control Simulation computer program is a tool for assessing the performance of various trace contaminant control technologies for removing trace chemical contamination from a spacecraft cabin atmosphere. The results obtained from the program can be useful in assessing different technology combinations, system sizing, system location with respect to other life support systems, and the overall life cycle economics of a trace contaminant control system. The user's manual is extracted in its entirety from NASA TM-108409 to provide a stand-alone reference for using any version of the program. The first publication of the manual as part of TM-108409 also included a detailed listing of version 8.0 of the program. As changes to the code were necessary, it became apparent that the user's manual should be separate from the computer code documentation and be general enough to provide guidance in using any version of the program. Provided in the guide are tips for input file preparation, general program execution, and output file manipulation. Information concerning source code listings of the latest version of the computer program may be obtained by contacting the author.

HYDROLOGIC EVALUATION OF LANDFILL PERFORMANCE (HELP) MODEL - USER'S GUIDE FOR VERSION 3

EPA Science Inventory

This report documents the solution methods and process descriptions used in the Version 3 of the HELP model. Program documentation including program options, system and operating requirements, file structures, program structure and variable descriptions are provided in a separat...

Patient assessment of diabetes care in a pay-for-performance program.

PubMed

Chiu, Herng-Chia; Hsieh, Hui-Min; Lin, Yi-Chieh; Kuo, Shou-Jen; Kao, Hao-Yun; Yeh, Shu-Chuan Jennifer; Chang, Wen-Hsin; Hsiao, Pi-Jung; Chen, Yao-Shen; Lin, Shoei-Loong; Lo, Gin-Ho; Ker, Chen-Guo; Hung, Yu-Han; Cheng, Hsien-An; Chou, Tiang-Hong; Chou, Sze-Yuan; Wang, Jao-Hsien; Wang, Chien-Fu

2016-04-01

Few studies address quality of care in pay-for-performance (P4P) programs from the perspective of patients' perceptions. This study aimed to examine and compare the patient assessment of diabetes chronic care as perceived by diabetic patients enrolled and not enrolled in a P4P program from the patients' self-reported perspectives. A cross-sectional study with case and comparison group design. A large-scale survey was conducted from February to November 2013 in 18 healthcare institutions in Taiwan. A total of 1458 P4P (n = 1037) and non-P4P (n = 421) diabetic patients participated in this large survey. The Chinese version of the Patient Assessment of Chronic Illness Care (PACIC) instrument was used and patients' clinical outcome data (e.g. HbA1c, LDL) were collected. None. Five subscales from the PACIC were measured, including patient activation, delivery system design/system support, goal setting/tailoring, problem solving/contextual and follow-up/coordination. Patient clinical outcomes were also measured. Multiple linear regression and logistic regression models were used and controlled for patient demographic and health institution characteristics statistically. After adjusting for covariates, P4P patients had higher overall scores on the PACIC and five subscales than non-P4P patients. P4P patients also had better clinical processes of care (e.g. HbA1c test) and intermediate outcomes. Patients who participated in the program likely received better patient-centered care given the original Chronic Care Model. Better perceptions of diabetic care assessment also better clinical outcomes. The PACIC instrument can be used for the patient assessment of chronic care in a P4P program. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

Trochanteric entry femoral nails yield better femoral version and lower revision rates-A large cohort multivariate regression analysis.

PubMed

Yoon, Richard S; Gage, Mark J; Galos, David K; Donegan, Derek J; Liporace, Frank A

2017-06-01

Intramedullary nailing (IMN) has become the standard of care for the treatment of most femoral shaft fractures. Different IMN options include trochanteric and piriformis entry as well as retrograde nails, which may result in varying degrees of femoral rotation. The objective of this study was to analyze postoperative femoral version between three types of nails and to delineate any significant differences in femoral version (DFV) and revision rates. Over a 10-year period, 417 patients underwent IMN of a diaphyseal femur fracture (AO/OTA 32A-C). Of these patients, 316 met inclusion criteria and obtained postoperative computed tomography (CT) scanograms to calculate femoral version and were thus included in the study. In this study, our main outcome measure was the difference in femoral version (DFV) between the uninjured limb and the injured limb. The effect of the following variables on DFV and revision rates were determined via univariate, multivariate, and ordinal regression analyses: gender, age, BMI, ethnicity, mechanism of injury, operative side, open fracture, and table type/position. Statistical significance was set at p<0.05. A total of 316 patients were included. Piriformis entry nails made up the majority (n=141), followed by retrograde (n=108), then trochanteric entry nails (n=67). Univariate regression analysis revealed that a lower BMI was significantly associated with a lower DFV (p=0.006). Controlling for possible covariables, multivariate analysis yielded a significantly lower DFV for trochanteric entry nails than piriformis or retrograde nails (7.9±6.10 vs. 9.5±7.4 vs. 9.4±7.8°, p<0.05). Using revision as an endpoint, trochanteric entry nails also had a significantly lower revision rate, even when controlling for all other variables (p<0.05). Comparative, objective comparisons between DFV between different nails based on entry point revealed that trochanteric nails had a significantly lower DFV and a lower revision rate, even after regression analysis. However, this is not to state that the other nail types exhibited abnormal DFV. Translation to the clinical impact of a few degrees of DFV is also unknown. Future studies to more in-depth study the intricacies of femoral version may lead to improved technology in addition to potentially improved clinical outcomes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Assessment of factors impacting success for incoming college engineering students in a summer bridge program

NASA Astrophysics Data System (ADS)

Reisel, John R.; Jablonski, Marissa; Hosseini, Hossein; Munson, Ethan

2012-06-01

A summer bridge program for incoming engineering and computer science freshmen has been used at the University of Wisconsin-Milwaukee from 2007 to 2010. The primary purpose of this program has been to improve the mathematics course placement for incoming students who initially place into a course below Calculus I on the math placement examination. The students retake the university's math placement examination after completing the bridge program to determine if they then place into a higher-level mathematics course. If the students improve their math placement, the program is considered successful for that student. The math portion of the bridge program is designed around using the ALEKS software package for targeted, self-guided learning. In the 2007 and 2008 versions of the program, both an on-line version and an on-campus version with additional instruction were offered. In 2009 and 2010, the program was exclusively in an on-campus format, and also featured a required residential component and additional engineering activities for the students. From the results of these four programs, we are able to evaluate the success of the program in its different formats. In addition, data has been collected and analysed regarding the impact of other factors on the program's success. The factors include student preparation before the beginning of the program (as measured by math ACT scores) and the amount of time the student spent working on the material during the program. Better math preparation and the amount of time spent on the program were found to be good indicators of success. Furthermore, the on-campus version of the program is more effective than the on-line version.

Avionic Data Bus Integration Technology

DTIC Science & Technology

1991-12-01

address the hardware-software interaction between a digital data bus and an avionic system. Very Large Scale Integration (VLSI) ICs and multiversion ...the SCP. In 1984, the Sperry Corporation developed a fault tolerant system which employed multiversion programming, voting, and monitoring for error... MULTIVERSION PROGRAMMING. N-version programming. 226 N-VERSION PROGRAMMING. The independent coding of a number, N, of redundant computer programs that

WAIS-IV Seven-Subtest Short Form: Validity and Clinical Use in Schizophrenia.

PubMed

Bulzacka, Ewa; Meyers, John E; Boyer, Laurent; Le Gloahec, Tifenn; Fond, Guillaume; Szöke, Andrei; Leboyer, Marion; Schürhoff, Franck

2016-09-01

This study assesses the psychometric properties of Ward's seven-subtest short form (SF) for WAIS-IV in a sample of adults with schizophrenia (SZ) and schizoaffective disorder. Seventy patients diagnosed with schizophrenia or schizoaffective disorder were administered the full version of the WAIS-IV. Four different versions of the Ward's SF were then calculated. The subtests used were: Similarities, Digit Span, Arithmetic, Information, Coding, Picture Completion, and Block Design (BD version) or Matrix Reasoning (MR version). Prorated and regression-based formulae were assessed for each version. The actual and estimated factorial indexes reflected the typical pattern observed in schizophrenia. The four SFs correlated significantly with their full-version counterparts, but the Perceptual Reasoning Index (PRI) correlated below the acceptance threshold for all four versions. The regression-derived estimates showed larger differences compared to the full form. The four forms revealed comparable but generally low clinical category agreement rates for factor indexes. All SFs showed an acceptable reliability, but they were not correlated with clinical outcomes. The WAIS-IV SF offers a good estimate of WAIS-IV intelligence quotient, which is consistent with previous results. Although the overall scores are comparable between the four versions, the prorated forms provided a better estimation of almost all indexes. MR can be used as an alternative for BD without substantially changing the psychometric properties of the SF. However, we recommend a cautious use of these abbreviated forms when it is necessary to estimate the factor index scores, especially PRI, and Processing Speed Index. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Cross-cultural measurement equivalence of the 5-level EQ-5D (EQ-5D-5L) in patients with type 2 diabetes mellitus in Singapore.

PubMed

Wang, Ye; Tan, Ngiap-Chuan; Tay, Ee-Guan; Thumboo, Julian; Luo, Nan

2015-07-16

This study aimed to assess the measurement equivalence of the 5-level EQ-5D (EQ-5D-5L) among the English, Chinese, and Malay versions. A convenience sample of patients with type 2 diabetes mellitus were enrolled from a public primary health care institution in Singapore. The survey questionnaire comprised the EQ-5D-5L and questions assessing participants' socio-demographic and clinical characteristics. Multiple linear regression models were used to assess the difference in EQ-5D-5L index (calculated using an interim algorithm) and EQ-visual analog scale (EQ-VAS) scores across survey language (Chinese vs. English, Malay vs. English, and Malay vs. Chinese). Measurement equivalence was examined by comparing the 90% confidence interval of difference in the EQ-5D-5L index and EQ-VAS scores with a pre-determined equivalence margin. Multiple logistic regression models were used to assess the response patterns of the 5 Likert-type items of the EQ-5D-5L across survey language. Equivalence was demonstrated between the Chinese and English versions and between the Malay and English versions of the EQ-5D-5L index scores. Equivalence was also demonstrated between the Chinese and English versions and between the Malay and Chinese versions of the EQ-VAS scores. Equivalence could not be determined between the Malay and Chinese versions of the EQ-5D-5L index score and between the Malay and English versions of the EQ-VAS score. No significant difference was found in responses to EQ-5D-5L items between any languages, except that patients who chose to complete the Chinese version were more likely to report "no problems" in mobility compared to those who completed the Malay version of the questionnaire. This study provided evidence for the measurement equivalence of the different language versions of EQ-5D-5L in Singapore.

The Dutch Memory Compensation Questionnaire: Psychometric Properties and Regression-Based Norms

ERIC Educational Resources Information Center

Van der Elst, Wim; Hoogenhout, Esther M.; Dixon, Roger A.; De Groot, Renate H. M.; Jolles, Jelle

2011-01-01

The Memory Compensation Questionnaire (MCQ) is a psychometrically sound instrument that assesses the variety and extent to which an individual compensates for actual or perceived memory losses. Until now, only an English version of the MCQ has been psychometrically evaluated. The aim of the present study was to establish a Dutch version of the MCQ…

Validation studies of the DOE-2 Building Energy Simulation Program. Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, R.; Winkelmann, F.

1998-06-01

This report documents many of the validation studies (Table 1) of the DOE-2 building energy analysis simulation program that have taken place since 1981. Results for several versions of the program are presented with the most recent study conducted in 1996 on version DOE-2.1E and the most distant study conducted in 1981 on version DOE-1.3. This work is part of an effort related to continued development of DOE-2, particularly in its use as a simulation engine for new specialized versions of the program such as the recently released RESFEN 3.1. RESFEN 3.1 is a program specifically dealing with analyzing themore » energy performance of windows in residential buildings. The intent in providing the results of these validation studies is to give potential users of the program a high degree of confidence in the calculated results. Validation studies in which calculated simulation data is compared to measured data have been conducted throughout the development of the DOE-2 program. Discrepancies discovered during the course of such work has resulted in improvements in the simulation algorithms. Table 2 provides a listing of additions and modifications that have been made to various versions of the program since version DOE-2.1A. One of the most significant recent changes in the program occurred with version DOE-2.1E. An improved algorithm for calculating the outside surface film coefficient was implemented. In addition, integration of the WINDOW 4 program was accomplished resulting in improved ability in analyzing window energy performance. Validation and verification of a program as sophisticated as DOE-2 must necessarily be limited because of the approximations inherent in the program. For example, the most accurate model of the heat transfer processes in a building would include a three-dimensional analysis. To justify such detailed algorithmic procedures would correspondingly require detailed information describing the building and/or HVAC system and energy plant parameters. Until building simulation programs can get this data directly from CAD programs, such detail would negate the usefulness of the program for the practicing engineers and architects who currently use the program. In addition, the validation studies discussed herein indicate that such detail is really unnecessary. The comparison of calculated and measured quantities have resulted in a satisfactory level of confidence that is sufficient for continued use of the DOE-2 program. However, additional validation is warranted, particularly at the component level, to further improve the program.« less

Comprehensive Monitoring Program: Air Quality Data Assessment Report for FY90. Volume 2. Version 3.1

DTIC Science & Technology

1991-09-01

91311R01 If VERSION 3.10) VOLUME II Comm 2ND COPY COMPREHENSIVE MONITORING PROGRAM Contract Number DAAAI5-87-0095 AIR QUALITY DATA ASSESSMENT REPORT...MONITORING PROGRAM. FINAL AIR QUALITY DATA ASSESSMENT REPORT FOR FY90, VERSION 3.1 NONE 6. AUTHOR(S) 7. PERFORMING ORGANIZATION NAME(S) AND ADDRES.S(S) 8...RELEASE; DISTRIBUTION IS UNLIMITED 13. ABSTRACT (Maximum 200 words) THE OBJECTIVE OF THIS CMP IS TO: VERIFY AND EVALUATE POTENTIAL AIR QUALITY HEALTH

Arlequin suite ver 3.5: a new series of programs to perform population genetics analyses under Linux and Windows.

PubMed

Excoffier, Laurent; Lischer, Heidi E L

2010-05-01

We present here a new version of the Arlequin program available under three different forms: a Windows graphical version (Winarl35), a console version of Arlequin (arlecore), and a specific console version to compute summary statistics (arlsumstat). The command-line versions run under both Linux and Windows. The main innovations of the new version include enhanced outputs in XML format, the possibility to embed graphics displaying computation results directly into output files, and the implementation of a new method to detect loci under selection from genome scans. Command-line versions are designed to handle large series of files, and arlsumstat can be used to generate summary statistics from simulated data sets within an Approximate Bayesian Computation framework. © 2010 Blackwell Publishing Ltd.

Parsimonious estimation of the Wechsler Memory Scale, Fourth Edition demographically adjusted index scores: immediate and delayed memory.

PubMed

Miller, Justin B; Axelrod, Bradley N; Schutte, Christian

2012-01-01

The recent release of the Wechsler Memory Scale Fourth Edition contains many improvements from a theoretical and administration perspective, including demographic corrections using the Advanced Clinical Solutions. Although the administration time has been reduced from previous versions, a shortened version may be desirable in certain situations given practical time limitations in clinical practice. The current study evaluated two- and three-subtest estimations of demographically corrected Immediate and Delayed Memory index scores using both simple arithmetic prorating and regression models. All estimated values were significantly associated with observed index scores. Use of Lin's Concordance Correlation Coefficient as a measure of agreement showed a high degree of precision and virtually zero bias in the models, although the regression models showed a stronger association than prorated models. Regression-based models proved to be more accurate than prorated estimates with less dispersion around observed values, particularly when using three subtest regression models. Overall, the present research shows strong support for estimating demographically corrected index scores on the WMS-IV in clinical practice with an adequate performance using arithmetically prorated models and a stronger performance using regression models to predict index scores.

QuTiP 2: A Python framework for the dynamics of open quantum systems

NASA Astrophysics Data System (ADS)

Johansson, J. R.; Nation, P. D.; Nori, Franco

2013-04-01

We present version 2 of QuTiP, the Quantum Toolbox in Python. Compared to the preceding version [J.R. Johansson, P.D. Nation, F. Nori, Comput. Phys. Commun. 183 (2012) 1760.], we have introduced numerous new features, enhanced performance, and made changes in the Application Programming Interface (API) for improved functionality and consistency within the package, as well as increased compatibility with existing conventions used in other scientific software packages for Python. The most significant new features include efficient solvers for arbitrary time-dependent Hamiltonians and collapse operators, support for the Floquet formalism, and new solvers for Bloch-Redfield and Floquet-Markov master equations. Here we introduce these new features, demonstrate their use, and give a summary of the important backward-incompatible API changes introduced in this version. Catalog identifier: AEMB_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEMB_v2_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 33625 No. of bytes in distributed program, including test data, etc.: 410064 Distribution format: tar.gz Programming language: Python. Computer: i386, x86-64. Operating system: Linux, Mac OSX. RAM: 2+ Gigabytes Classification: 7. External routines: NumPy, SciPy, Matplotlib, Cython Catalog identifier of previous version: AEMB_v1_0 Journal reference of previous version: Comput. Phys. Comm. 183 (2012) 1760 Does the new version supercede the previous version?: Yes Nature of problem: Dynamics of open quantum systems Solution method: Numerical solutions to Lindblad, Floquet-Markov, and Bloch-Redfield master equations, as well as the Monte Carlo wave function method. Reasons for new version: Compared to the preceding version we have introduced numerous new features, enhanced performance, and made changes in the Application Programming Interface (API) for improved functionality and consistency within the package, as well as increased compatibility with existing conventions used in other scientific software packages for Python. The most significant new features include efficient solvers for arbitrary time-dependent Hamiltonians and collapse operators, support for the Floquet formalism, and new solvers for Bloch-Redfield and Floquet-Markov master equations. Restrictions: Problems must meet the criteria for using the master equation in Lindblad, Floquet-Markov, or Bloch-Redfield form. Running time: A few seconds up to several tens of hours, depending on size of the underlying Hilbert space.

Potential youth exposure to alcohol advertising on the internet: A study of internet versions of popular television programs

PubMed Central

Siegel, Michael; Kurland, Rachel P.; Castrini, Marisa; Morse, Catherine; de Groot, Alexander; Retamozo, Cynthia; Roberts, Sarah P.; Ross, Craig S.; Jernigan, David H.

2015-01-01

Background No previous paper has examined alcohol advertising on the internet versions of television programs popular among underage youth. Objectives To assess the volume of alcohol advertising on web sites of television networks which stream television programs popular among youth. Methods Multiple viewers analyzed the product advertising appearing on 12 television programs that are available in full episode format on the internet. During a baseline period of one week, six coders analyzed all 12 programs. For the nine programs that contained alcohol advertising, three underage coders (ages 10, 13, and 18) analyzed the programs to quantify the extent of that advertising over a four-week period. Results Alcohol advertisements are highly prevalent on these programs, with nine of the 12 shows carrying alcohol ads, and six programs averaging at least one alcohol ad per episode. There was no difference in alcohol ad exposure for underage and legal age viewers. Conclusions There is a substantial potential for youth exposure to alcohol advertising on the internet through internet-based versions of television programs. The Federal Trade Commission should require alcohol companies to report the underage youth and adult audiences for internet versions of television programs on which they advertise. PMID:27212891

Expert System for Automated Design Synthesis

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Barthelemy, Jean-Francois M.

1987-01-01

Expert-system computer program EXADS developed to aid users of Automated Design Synthesis (ADS) general-purpose optimization program. EXADS aids engineer in determining best combination based on knowledge of specific problem and expert knowledge stored in knowledge base. Available in two interactive machine versions. IBM PC version (LAR-13687) written in IQ-LISP. DEC VAX version (LAR-13688) written in Franz-LISP.

GENXICC2.0: An upgraded version of the generator for hadronic production of double heavy baryons Ξ, Ξ and Ξ

NASA Astrophysics Data System (ADS)

Chang, Chao-Hsi; Wang, Jian-Xiong; Wu, Xing-Gang

2010-06-01

An upgraded (second) version of the package GENXICC (A Generator for Hadronic Production of the Double Heavy Baryons Ξ, Ξ and Ξ by C.H. Chang, J.X. Wang and X.G. Wu [its first version in: Comput. Phys. Comm. 177 (2007) 467]) is presented. Users, with this version being implemented in PYTHIA and a GNU C compiler, may simulate full events of these processes in various experimental environments conveniently. In comparison with the previous version, in order to implement it in PYTHIA properly, a subprogram for the fragmentation of the produced double heavy diquark to the relevant baryon is supplied and the interface of the generator to PYTHIA is changed accordingly. In the subprogram, with explanation, certain necessary assumptions (approximations) are made in order to conserve the momenta and the QCD 'color' flow for the fragmentation. Program summaryProgram title: GENXICC2.0 Catalogue identifier: ADZJ_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADZJ_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 102 482 No. of bytes in distributed program, including test data, etc.: 1 469 519 Distribution format: tar.gz Programming language: Fortran 77/90 Computer: Any LINUX based on PC with FORTRAN 77 or FORTRAN 90 and GNU C compiler as well Operating system: Linux RAM: About 2.0 MByte Classification: 11.2 Catalogue identifier of previous version: ADZJ_v1_0 Journal reference of previous version: Comput. Phys. Comm. 177 (2007) 467 Does the new version supersede the previous version?: No Nature of problem: Hadronic production of double heavy baryons Ξ, Ξ and Ξ Solution method: The code is based on NRQCD framework. With proper options, it can generate weighted and un-weighted events of hadronic double heavy baryon production. When the hadronizations of the produced jets and double heavy diquark are taken into account in the production, the upgraded version with proper interface to PYTHIA can generate full events. Reasons for new version: Responding to the feedback from users, we improve the generator mainly by carefully completing the 'final non-perturbative process', i.e. the formulation of the double heavy baryon from relevant intermediate diquark. In the present version, the information for fragmentation about momentum-flow and the color-flow, that is necessary for PYTHIA to generate full events, is retained although reasonable approximations are made. In comparison with the original version, the upgraded one can implement it in PYTHIA properly to do the full event simulation of the double heavy baryon production. Summary of revisions:We try to explain the treatment of the momentum distribution of the process more clearly than the original version, and show how the final baryon is generated through the typical intermediate diquark precisely. We present color flow of the involved processes precisely and the corresponding changes for the program are made. The corresponding changes of the program are explained in the paper. Restrictions: The color flow, particularly, in the piece of code programming of the fragmentation from the produced colorful double heavy diquark into a relevant double heavy baryon, is treated carefully so as to implement it in PYTHIA properly. Running time: It depends on which option is chosen to configure PYTHIA when generating full events and also on which mechanism is chosen to generate the events. Typically, for the most complicated case with gluon-gluon fusion mechanism to generate the mixed events via the intermediate diquark in (cc)[ and (cc)[ states, under the option, IDWTUP=1, to generate 1000 events, takes about 20 hours on a 1.8 GHz Intel P4-processor machine, whereas under the option, IDWTUP=3, even to generate 106 events takes about 40 minutes on the same machine.

The statistical analysis of multi-environment data: modeling genotype-by-environment interaction and its genetic basis

PubMed Central

Malosetti, Marcos; Ribaut, Jean-Marcel; van Eeuwijk, Fred A.

2013-01-01

Genotype-by-environment interaction (GEI) is an important phenomenon in plant breeding. This paper presents a series of models for describing, exploring, understanding, and predicting GEI. All models depart from a two-way table of genotype by environment means. First, a series of descriptive and explorative models/approaches are presented: Finlay–Wilkinson model, AMMI model, GGE biplot. All of these approaches have in common that they merely try to group genotypes and environments and do not use other information than the two-way table of means. Next, factorial regression is introduced as an approach to explicitly introduce genotypic and environmental covariates for describing and explaining GEI. Finally, QTL modeling is presented as a natural extension of factorial regression, where marker information is translated into genetic predictors. Tests for regression coefficients corresponding to these genetic predictors are tests for main effect QTL expression and QTL by environment interaction (QEI). QTL models for which QEI depends on environmental covariables form an interesting model class for predicting GEI for new genotypes and new environments. For realistic modeling of genotypic differences across multiple environments, sophisticated mixed models are necessary to allow for heterogeneity of genetic variances and correlations across environments. The use and interpretation of all models is illustrated by an example data set from the CIMMYT maize breeding program, containing environments differing in drought and nitrogen stress. To help readers to carry out the statistical analyses, GenStat® programs, 15th Edition and Discovery® version, are presented as “Appendix.” PMID:23487515

A new version of a computer program for dynamical calculations of RHEED intensity oscillations

NASA Astrophysics Data System (ADS)

Daniluk, Andrzej; Skrobas, Kazimierz

2006-01-01

We present a new version of the RHEED program which contains a graphical user interface enabling the use of the program in the graphical environment. The presented program also contains a graphical component which enables displaying program data at run-time through an easy-to-use graphical interface. New version program summaryTitle of program: RHEEDGr Catalogue identifier: ADWV Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADWV Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Catalogue identifier of previous version: ADUY Authors of the original program: A. Daniluk Does the new version supersede the original program: no Computer for which the new version is designed and others on which it has been tested: Pentium-based PC Operating systems or monitors under which the new version has been tested: Windows 9x, XP, NT Programming language used: Borland C++ Builder Memory required to execute with typical data: more than 1 MB Number of bits in a word: 64 bits Number of processors used: 1 Number of lines in distributed program, including test data, etc.: 5797 Number of bytes in distributed program, including test data, etc.: 588 121 Distribution format: tar.gz Nature of physical problem: Reflection high-energy electron diffraction (RHEED) is a very useful technique for studying growth and surface analysis of thin epitaxial structures prepared by the molecular beam epitaxy (MBE). The RHEED technique can reveal, almost instantaneously, changes either in the coverage of the sample surface by adsorbates or in the surface structure of a thin film. Method of solution: RHEED intensities are calculated within the framework of the general matrix formulation of Peng and Whelan [1] under the one-beam condition. Reasons for the new version: Responding to the user feedback we designed a graphical package that enables displaying program data at run-time through an easy-to-use graphical interface. Summary of revisions:In the present form the code is an object-oriented extension of previous version [2]. Fig. 1 shows the static structure of classes and their possible relationships (i.e. inheritance, association, aggregation and dependency) in the code. The code has been modified and optimized to compile under the C++ Builder integrated development environment (IDE). A graphical user interface (GUI) for the program has been created. The application is a standard multiple document interface (MDI) project from Builder's object repository. The MDI application spawns child window that reside within the client window; the main form contains child object. We have added an original graphical component [3] which has been tested successfully in the C++ Builder programming environment under Microsoft Windows platform. Fig. 2 shows internal structure of the component. This diagram is a graphic presentation of the static view which shows a collection of declarative model elements, such as classes, types, and their relationships. Each of the model elements shown in Fig. 2 is manifested by one header file Graph2D.h, and one code file Graph2D.cpp. Fig. 3 sets the stage by showing the package which supplies the C++ Builder elements used in the component. Installation instructions of the TGraph2D.bpk package can be found in the new distribution. The program has been constructed according to the systems development live cycle (SDLC) methodology [4]. Typical running time: The typical running time is machine and user-parameters dependent. Unusual features of the program: The program is distributed in the form of a main project RHEEDGr.bpr with associated files, and should be compiled using Borland C++ Builder compilers version 5 or later.

Software fault-tolerance by design diversity DEDIX: A tool for experiments

NASA Technical Reports Server (NTRS)

Avizienis, A.; Gunningberg, P.; Kelly, J. P. J.; Lyu, R. T.; Strigini, L.; Traverse, P. J.; Tso, K. S.; Voges, U.

1986-01-01

The use of multiple versions of a computer program, independently designed from a common specification, to reduce the effects of an error is discussed. If these versions are designed by independent programming teams, it is expected that a fault in one version will not have the same behavior as any fault in the other versions. Since the errors in the output of the versions are different and uncorrelated, it is possible to run the versions concurrently, cross-check their results at prespecified points, and mask errors. A DEsign DIversity eXperiments (DEDIX) testbed was implemented to study the influence of common mode errors which can result in a failure of the entire system. The layered design of DEDIX and its decision algorithm are described.

Improving Thai Students' Understanding of Concepts in Protein Purification by Using Thai and English Versions of a Simulation Program

ERIC Educational Resources Information Center

Phornphisutthimas, Somkiat; Panijpan, Bhinyo; Wood, Edward J.; Booth, Andrew G.

2007-01-01

To support student learning in biochemistry and related courses, a simulation program, the Protein Purification Program, offers an alternative multimedia-based tool. This program has now been translated to produce a Thai version. However, translation from the original into the Thai language is limited by the differences between the language…

Calculating Trajectories And Orbits

NASA Technical Reports Server (NTRS)

Alderson, Daniel J.; Brady, Franklyn H.; Breckheimer, Peter J.; Campbell, James K.; Christensen, Carl S.; Collier, James B.; Ekelund, John E.; Ellis, Jordan; Goltz, Gene L.; Hintz, Gerarld R.;

The Short-term Effects of ASPIRA: A Web-based, Multimedia Smoking Prevention Program for Adolescents in Romania: A Cluster Randomized Trial.

PubMed

Nădăşan, Valentin; Foley, Kristie L; Pénzes, Melinda; Paulik, Edit; Mihăicuţă, Ștefan; Ábrám, Zoltán; Bálint, Jozsef; Csibi, Monika; Urbán, Robert

2017-08-01

Although web-based, multimedia smoking prevention programs have been tested in several high-income countries, their efficacy in Central and Eastern Europe is unknown. The aim of this trial was to assess the short-term effects of ASPIRA, among Romanian and Hungarian speaking ninth graders in Tirgu Mures, Romania. ASPIRA is the Romanian acronym for the translated and adapted version of ASPIRE, "A Smoking Prevention Interactive Experience," an evidence-based smoking prevention program originally developed to prevent tobacco use among high school students in the United States. Sixteen high schools in Tirgu Mures, Romania were randomized to receive five weekly sessions of the ASPIRA web-based, multimedia program or to a control condition. Socio-demographic data, psychosocial characteristics, and smoking behavior were collected from students at baseline and at 6 months. A hierarchical logistic regression analysis was conducted to test the efficacy of the intervention on smoking initiation and current smoking among 1369 students. Never-smoker students in the intervention arm were 35% less likely to report smoking initiation 6 months after the baseline assessment (OR = 0.65, 95%CI: 0.44-0.97). Reduced smoking initiation was observed most notably among students who were exposed to at least 75% of the ASPIRA program. There was no statistically significant effect of the intervention on current tobacco use (OR = 0.80, 95%CI: 0.44-1.46). ASPIRA, an adapted version of the evidence-based, multimedia ASPIRE program that was originally developed and tested in the United States may decrease smoking initiation among multi-ethnic adolescents in Central and Eastern Europe. (1). Web-based, multimedia smoking prevention programs may be effective tools to prevent smoking initiation among multi-ethnic adolescent communities in Central and Eastern Europe. (2). The degree of exposure is critical, only high exposure to the multimedia smoking prevention program is associated with reduced smoking initiation. © The Author 2016. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco.

An all-FORTRAN version of NASTRAN for the VAX

NASA Technical Reports Server (NTRS)

Purves, L.

1981-01-01

All FORTRAN version of NASA structural analysis program NASATRAN is implemented on DEC VAX-series computer. Applications of NASATRAN extend to almost every type of linear structure and construction. Two special features are available in VAX version; program is executed from terminal in manner permitting use of VAX interactive debugger, and links are interactively restarted when desired by first making copy of all NASATRAN work files.

Modular reweighting software for statistical mechanical analysis of biased equilibrium data

NASA Astrophysics Data System (ADS)

Sindhikara, Daniel J.

2012-07-01

Here a simple, useful, modular approach and software suite designed for statistical reweighting and analysis of equilibrium ensembles is presented. Statistical reweighting is useful and sometimes necessary for analysis of equilibrium enhanced sampling methods, such as umbrella sampling or replica exchange, and also in experimental cases where biasing factors are explicitly known. Essentially, statistical reweighting allows extrapolation of data from one or more equilibrium ensembles to another. Here, the fundamental separable steps of statistical reweighting are broken up into modules - allowing for application to the general case and avoiding the black-box nature of some “all-inclusive” reweighting programs. Additionally, the programs included are, by-design, written with little dependencies. The compilers required are either pre-installed on most systems, or freely available for download with minimal trouble. Examples of the use of this suite applied to umbrella sampling and replica exchange molecular dynamics simulations will be shown along with advice on how to apply it in the general case. New version program summaryProgram title: Modular reweighting version 2 Catalogue identifier: AEJH_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEJH_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 179 118 No. of bytes in distributed program, including test data, etc.: 8 518 178 Distribution format: tar.gz Programming language: C++, Python 2.6+, Perl 5+ Computer: Any Operating system: Any RAM: 50-500 MB Supplementary material: An updated version of the original manuscript (Comput. Phys. Commun. 182 (2011) 2227) is available Classification: 4.13 Catalogue identifier of previous version: AEJH_v1_0 Journal reference of previous version: Comput. Phys. Commun. 182 (2011) 2227 Does the new version supersede the previous version?: Yes Nature of problem: While equilibrium reweighting is ubiquitous, there are no public programs available to perform the reweighting in the general case. Further, specific programs often suffer from many library dependencies and numerical instability. Solution method: This package is written in a modular format that allows for easy applicability of reweighting in the general case. Modules are small, numerically stable, and require minimal libraries. Reasons for new version: Some minor bugs, some upgrades needed, error analysis added. analyzeweight.py/analyzeweight.py2 has been replaced by “multihist.py”. This new program performs all the functions of its predecessor while being versatile enough to handle other types of histograms and probability analysis. “bootstrap.py” was added. This script performs basic bootstrap resampling allowing for error analysis of data. “avg_dev_distribution.py” was added. This program computes the averages and standard deviations of multiple distributions, making error analysis (e.g. from bootstrap resampling) easier to visualize. WRE.cpp was slightly modified purely for cosmetic reasons. The manual was updated for clarity and to reflect version updates. Examples were removed from the manual in favor of online tutorials (packaged examples remain). Examples were updated to reflect the new format. An additional example is included to demonstrate error analysis. Running time: Preprocessing scripts 1-5 minutes, WHAM engine <1 minute, postprocess script ∼1-5 minutes.

REFERENCE MANUAL FOR RASSMIT VERSION 2.1: SUB-SLAB DEPRESSURIZATION SYSTEM DESIGN PERFORMANCE SIMULATION PROGRAM

EPA Science Inventory

The report is a reference manual for RASSMlT Version 2.1, a computer program that was developed to simulate and aid in the design of sub-slab depressurization systems used for indoor radon mitigation. The program was designed to run on DOS-compatible personal computers to ensure ...

User's guide for Northeast Stand Exam Program (NEST Version 2.1).

Treesearch

Thomas M. Schuler; Brian T. Simpson

1991-01-01

Explains the Northeast Stand Exam (NEST Version 2.1) program. The NEST program was designed for use on the Polycorder 600 Series electronic portable data recorder to record data collected from the standard permanent plot as described by the Stand Culture and Stand Establishment Working Groups of the Northeastern Forest Experiment Station.

Applying PRECEDE-PROCEED to Develop an Intuitive Eating Nondieting Approach to Weight Management Pilot Program

ERIC Educational Resources Information Center

Cole, Renee E.; Horacek, Tanya

2009-01-01

Objective: To describe the use of a consolidated version of the PRECEDE-PROCEED participatory program planning model to collaboratively design an intuitive eating program with Fort Drum military spouses tailored to their readiness to reject the dieting mentality and make healthful lifestyle modifications. Design: A consolidated version of…

Effects of Experimentally Induced Familiarization of Content and Different Response Modes on Achievement from Programmed Instruction.

ERIC Educational Resources Information Center

Abramson, Theodore; Kagen, Edward

This study investigated attribute by treatment interactions between prior familiarity and response mode to programmed materials for college level subjects by manipulating subjects' familiarity. The programs were a revised version of Diagnosis of Myocardial Infraction in standard format and in a reading version. Materials to familiarize subjects…

42 CFR 423.160 - Standards for electronic prescribing.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Council for Prescription Drug Programs Prescriber/Pharmacist Interface SCRIPT Standard, Implementation... National Council for Prescription Drug Programs Prescriber/Pharmacist Interface SCRIPT Standard... Prescriber/Pharmacist Interface SCRIPT Standard, Implementation Guide Version 8, Release 1 (Version 8.1...

42 CFR 423.160 - Standards for electronic prescribing.

Code of Federal Regulations, 2013 CFR

2013-10-01

... National Council for Prescription Drug Programs Prescriber/Pharmacist Interface SCRIPT Standard... National Council for Prescription Drug Programs Prescriber/Pharmacist Interface SCRIPT Standard... Prescriber/Pharmacist Interface SCRIPT Standard, Implementation Guide Version 8, Release 1 (Version 8.1...

42 CFR 423.160 - Standards for electronic prescribing.

Code of Federal Regulations, 2014 CFR

2014-10-01

... National Council for Prescription Drug Programs Prescriber/Pharmacist Interface SCRIPT Standard... National Council for Prescription Drug Programs Prescriber/Pharmacist Interface SCRIPT Standard... Prescriber/Pharmacist Interface SCRIPT Standard, Implementation Guide Version 8, Release 1 (Version 8.1...

10 CFR 431.203 - Materials incorporated by reference.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... Environmental Protection Agency “ENERGY STAR Program Requirements for Exit Signs,” Version 2.0 issued January 1... Protection Agency “ENERGY STAR Program Requirements for Exit Signs,” Version 2.0, may be obtained from the...

10 CFR 431.203 - Materials incorporated by reference.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... Environmental Protection Agency “ENERGY STAR Program Requirements for Exit Signs,” Version 2.0 issued January 1... Protection Agency “ENERGY STAR Program Requirements for Exit Signs,” Version 2.0, may be obtained from the...

10 CFR 431.203 - Materials incorporated by reference.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... Environmental Protection Agency “ENERGY STAR Program Requirements for Exit Signs,” Version 2.0 issued January 1... Protection Agency “ENERGY STAR Program Requirements for Exit Signs,” Version 2.0, may be obtained from the...

10 CFR 431.203 - Materials incorporated by reference.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... Environmental Protection Agency “ENERGY STAR Program Requirements for Exit Signs,” Version 2.0 issued January 1... Protection Agency “ENERGY STAR Program Requirements for Exit Signs,” Version 2.0, may be obtained from the...

10 CFR 431.203 - Materials incorporated by reference.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... Environmental Protection Agency “ENERGY STAR Program Requirements for Exit Signs,” Version 2.0 issued January 1... Protection Agency “ENERGY STAR Program Requirements for Exit Signs,” Version 2.0, may be obtained from the...

Factors Associated with High Use of a Workplace Web-Based Stress Management Program in a Randomized Controlled Intervention Study

ERIC Educational Resources Information Center

Hasson, H.; Brown, C.; Hasson, D.

2010-01-01

In web-based health promotion programs, large variations in participant engagement are common. The aim was to investigate determinants of high use of a worksite self-help web-based program for stress management. Two versions of the program were offered to randomly selected departments in IT and media companies. A static version of the program…

The Effectiveness of Adapted Versions of an Evidence-Based Prevention Program in Reducing Alcohol Use among Alternative School Students

ERIC Educational Resources Information Center

Hopson, Laura M.; Holleran Steiker, Lori K.

2010-01-01

Although there is a strong evidence base for effective substance abuse prevention programs for youths, there is a need to facilitate the implementation and evaluation of these programs in real-world settings. This study evaluates the effectiveness of adapted versions of an evidence-based prevention program, keepin' it REAL (kiR), with alternative…

Daily values flow comparison and estimates using program HYCOMP, version 1.0

USGS Publications Warehouse

Sanders, Curtis L.

2002-01-01

A method used by the U.S. Geological Survey for quality control in computing daily value flow records is to compare hydrographs of computed flows at a station under review to hydrographs of computed flows at a selected index station. The hydrographs are placed on top of each other (as hydrograph overlays) on a light table, compared, and missing daily flow data estimated. This method, however, is subjective and can produce inconsistent results, because hydrographers can differ when calculating acceptable limits of deviation between observed and estimated flows. Selection of appropriate index stations also is judgemental, giving no consideration to the mathematical correlation between the review station and the index station(s). To address the limitation of the hydrograph overlay method, a set of software programs, written in the SAS macrolanguage, was developed and designated Program HYDCOMP. The program automatically selects statistically comparable index stations by correlation and regression, and performs hydrographic comparisons and estimates of missing data by regressing daily mean flows at the review station against -8 to +8 lagged flows at one or two index stations and day-of-week. Another advantage that HYDCOMP has over the graphical method is that estimated flows, the criteria for determining the quality of the data, and the selection of index stations are determined statistically, and are reproducible from one user to another. HYDCOMP will load the most-correlated index stations into another file containing the ?best index stations,? but will not overwrite stations already in the file. A knowledgeable user should delete unsuitable index stations from this file based on standard error of estimate, hydrologic similarity of candidate index stations to the review station, and knowledge of the individual station characteristics. Also, the user can add index stations not selected by HYDCOMP, if desired. Once the file of best-index stations is created, a user may do hydrographic comparison and data estimates by entering the number of the review station, selecting an index station, and specifying the periods to be used for regression and plotting. For example, the user can restrict the regression to ice-free periods of the year to exclude flows estimated during iced conditions. However, the regression could still be used to estimate flow during iced conditions. HYDCOMP produces the standard error of estimate as a measure of the central scatter of the regression and R-square (coefficient of determination) for evaluating the accuracy of the regression. Output from HYDCOMP includes plots of percent residuals against (1) time within the regression and plot periods, (2) month and day of the year for evaluating seasonal bias in the regression, and (3) the magnitude of flow. For hydrographic comparisons, it plots 2-month segments of hydrographs over the selected plot period showing the observed flows, the regressed flows, the 95 percent confidence limit flows, flow measurements, and regression limits. If the observed flows at the review station remain outside the 95 percent confidence limits for a prolonged period, there may be some error in the flows at the review station or at the index station(s). In addition, daily minimum and maximum temperatures and daily rainfall are shown on the hydrographs, if available, to help indicate whether an apparent change in flow may result from rainfall or from changes in backwater from melting ice or freezing water. HYDCOMP statistically smooths estimated flows from non-missing flows at the edges of the gaps in data into regressed flows at the center of the gaps using the Kalman smoothing algorithm. Missing flows are automatically estimated by HYDCOMP, but the user also can specify that periods of erroneous, but nonmissing flows, be estimated by the program.

CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (IBM PC VERSION)

NASA Technical Reports Server (NTRS)

Riley, G.

1994-01-01

The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh version each contain a windowing variant of CLIPS as well as the standard line oriented version. The mouse/window interface version for the PC works with a Microsoft compatible mouse or without a mouse. This window version uses the proprietary CURSES library for the PC, but a working executable of the window version is provided. The window oriented version for the Macintosh includes a version which uses a full Macintosh-style interface, including an integrated editor. This version allows the user to observe the changing fact base and rule activations in separate windows while a CLIPS program is executing. The IBM PC version is available bundled with CLIPSITS, The CLIPS Intelligent Tutoring System for a special combined price (COS-10025). The goal of CLIPSITS is to provide the student with a tool to practice the syntax and concepts covered in the CLIPS User's Guide. It attempts to provide expert diagnosis and advice during problem solving which is typically not available without an instructor. CLIPSITS is divided into 10 lessons which mirror the first 10 chapters of the CLIPS User's Guide. The program was developed for the IBM PC series with a hard disk. CLIPSITS is also available separately as MSC-21679. The CLIPS program is written in C for interactive execution and has been implemented on an IBM PC computer operating under DOS, a Macintosh and DEC VAX series computers operating under VMS or ULTRIX. The line oriented version should run on any computer system which supports a full (Kernighan and Ritchie) C compiler or the ANSI standard C language. CLIPS was developed in 1986 and Version 4.2 was released in July of 1988. Version 4.3 was released in June of 1989.

CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (MACINTOSH VERSION)

NASA Technical Reports Server (NTRS)

Culbert, C.

1994-01-01

The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh version each contain a windowing variant of CLIPS as well as the standard line oriented version. The mouse/window interface version for the PC works with a Microsoft compatible mouse or without a mouse. This window version uses the proprietary CURSES library for the PC, but a working executable of the window version is provided. The window oriented version for the Macintosh includes a version which uses a full Macintosh-style interface, including an integrated editor. This version allows the user to observe the changing fact base and rule activations in separate windows while a CLIPS program is executing. The IBM PC version is available bundled with CLIPSITS, The CLIPS Intelligent Tutoring System for a special combined price (COS-10025). The goal of CLIPSITS is to provide the student with a tool to practice the syntax and concepts covered in the CLIPS User's Guide. It attempts to provide expert diagnosis and advice during problem solving which is typically not available without an instructor. CLIPSITS is divided into 10 lessons which mirror the first 10 chapters of the CLIPS User's Guide. The program was developed for the IBM PC series with a hard disk. CLIPSITS is also available separately as MSC-21679. The CLIPS program is written in C for interactive execution and has been implemented on an IBM PC computer operating under DOS, a Macintosh and DEC VAX series computers operating under VMS or ULTRIX. The line oriented version should run on any computer system which supports a full (Kernighan and Ritchie) C compiler or the ANSI standard C language. CLIPS was developed in 1986 and Version 4.2 was released in July of 1988. Version 4.3 was released in June of 1989.

CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (IBM PC VERSION WITH CLIPSITS)

NASA Technical Reports Server (NTRS)

Riley, , .

1994-01-01

The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh version each contain a windowing variant of CLIPS as well as the standard line oriented version. The mouse/window interface version for the PC works with a Microsoft compatible mouse or without a mouse. This window version uses the proprietary CURSES library for the PC, but a working executable of the window version is provided. The window oriented version for the Macintosh includes a version which uses a full Macintosh-style interface, including an integrated editor. This version allows the user to observe the changing fact base and rule activations in separate windows while a CLIPS program is executing. The IBM PC version is available bundled with CLIPSITS, The CLIPS Intelligent Tutoring System for a special combined price (COS-10025). The goal of CLIPSITS is to provide the student with a tool to practice the syntax and concepts covered in the CLIPS User's Guide. It attempts to provide expert diagnosis and advice during problem solving which is typically not available without an instructor. CLIPSITS is divided into 10 lessons which mirror the first 10 chapters of the CLIPS User's Guide. The program was developed for the IBM PC series with a hard disk. CLIPSITS is also available separately as MSC-21679. The CLIPS program is written in C for interactive execution and has been implemented on an IBM PC computer operating under DOS, a Macintosh and DEC VAX series computers operating under VMS or ULTRIX. The line oriented version should run on any computer system which supports a full (Kernighan and Ritchie) C compiler or the ANSI standard C language. CLIPS was developed in 1986 and Version 4.2 was released in July of 1988. Version 4.3 was released in June of 1989.

A computer program (MODFLOWP) for estimating parameters of a transient, three-dimensional ground-water flow model using nonlinear regression

USGS Publications Warehouse

Hill, Mary Catherine

1992-01-01

This report documents a new version of the U.S. Geological Survey modular, three-dimensional, finite-difference, ground-water flow model (MODFLOW) which, with the new Parameter-Estimation Package that also is documented in this report, can be used to estimate parameters by nonlinear regression. The new version of MODFLOW is called MODFLOWP (pronounced MOD-FLOW*P), and functions nearly identically to MODFLOW when the ParameterEstimation Package is not used. Parameters are estimated by minimizing a weighted least-squares objective function by the modified Gauss-Newton method or by a conjugate-direction method. Parameters used to calculate the following MODFLOW model inputs can be estimated: Transmissivity and storage coefficient of confined layers; hydraulic conductivity and specific yield of unconfined layers; vertical leakance; vertical anisotropy (used to calculate vertical leakance); horizontal anisotropy; hydraulic conductance of the River, Streamflow-Routing, General-Head Boundary, and Drain Packages; areal recharge rates; maximum evapotranspiration; pumpage rates; and the hydraulic head at constant-head boundaries. Any spatial variation in parameters can be defined by the user. Data used to estimate parameters can include existing independent estimates of parameter values, observed hydraulic heads or temporal changes in hydraulic heads, and observed gains and losses along head-dependent boundaries (such as streams). Model output includes statistics for analyzing the parameter estimates and the model; these statistics can be used to quantify the reliability of the resulting model, to suggest changes in model construction, and to compare results of models constructed in different ways.

Investigation of marital satisfaction and its relationship with job stress and general health of nurses in Qazvin, Iran.

PubMed

Azimian, Jalil; Piran, Pegah; Jahanihashemi, Hassan; Dehghankar, Leila

2017-04-01

Pressures in nursing can affect family life and marital problems, disrupt common social problems, increase work-family conflicts and endanger people's general health. To determine marital satisfaction and its relationship with job stress and general health of nurses. This descriptive and cross-sectional study was done in 2015 in medical educational centers of Qazvin by using an ENRICH marital satisfaction scale and General Health and Job Stress questionnaires completed by 123 nurses. Analysis was done by SPSS version 19 using descriptive and analytical statistics (Pearson correlation, t-test, ANOVA, Chi-square, regression line, multiple regression analysis). The findings showed that 64.4% of nurses had marital satisfaction. There was significant relationship between age (p=0.03), job experience (p=0.01), age of spouse (p=0.01) and marital satisfaction. The results showed that there was a significant relationship between marital satisfaction and general health (p<0.0001). Multiple regression analysis showed that there was a significant relationship between depression (p=0.012) and anxiety (p=0.001) with marital satisfaction. Due to high levels of job stress and disorder in general health of nurses and low marital satisfaction by running health promotion programs and paying attention to its dimensions can help work and family health of nurses.

Three Dimensional Thermal Pollution Models. Volume 2; Rigid-Lid Models

NASA Technical Reports Server (NTRS)

Lee, S. S.; Sengupta, S.

1978-01-01

Three versions of rigid lid programs are presented: one for near field simulation; the second for far field unstratified situations; and the third for stratified basins, far field simulation. The near field simulates thermal plume areas, and the far field version simulates larger receiving aquatic ecosystems. Since these versions have many common subroutines, a unified testing is provided, with main programs for the three possible conditions listed.

CADNA_C: A version of CADNA for use with C or C++ programs

NASA Astrophysics Data System (ADS)

Lamotte, Jean-Luc; Chesneaux, Jean-Marie; Jézéquel, Fabienne

2010-11-01

The CADNA library enables one to estimate round-off error propagation using a probabilistic approach. The CADNA_C version enables this estimation in C or C++ programs, while the previous version had been developed for Fortran programs. The CADNA_C version has the same features as the previous one: with CADNA the numerical quality of any simulation program can be controlled. Furthermore by detecting all the instabilities which may occur at run time, a numerical debugging of the user code can be performed. CADNA provides new numerical types on which round-off errors can be estimated. Slight modifications are required to control a code with CADNA, mainly changes in variable declarations, input and output. New version program summaryProgram title: CADNA_C Catalogue identifier: AEGQ_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEGQ_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 60 075 No. of bytes in distributed program, including test data, etc.: 710 781 Distribution format: tar.gz Programming language: C++ Computer: PC running LINUX with an i686 or an ia64 processor, UNIX workstations including SUN, IBM Operating system: LINUX, UNIX Classification: 6.5 Catalogue identifier of previous version: AEAT_v1_0 Journal reference of previous version: Comput. Phys. Comm. 178 (2008) 933 Does the new version supersede the previous version?: No Nature of problem: A simulation program which uses floating-point arithmetic generates round-off errors, due to the rounding performed at each assignment and at each arithmetic operation. Round-off error propagation may invalidate the result of a program. The CADNA library enables one to estimate round-off error propagation in any simulation program and to detect all numerical instabilities that may occur at run time. Solution method: The CADNA library [1-3] implements Discrete Stochastic Arithmetic [4,5] which is based on a probabilistic model of round-off errors. The program is run several times with a random rounding mode generating different results each time. From this set of results, CADNA estimates the number of exact significant digits in the result that would have been computed with standard floating-point arithmetic. Reasons for new version: The previous version (AEAT_v1_0) enables the estimation of round-off error propagation in Fortran programs [2]. The new version has been developed to enable this estimation in C or C++ programs. Summary of revisions: The CADNA_C source code consists of one assembly language file (cadna_rounding.s) and twenty-three C++ language files (including three header files). cadna_rounding.s is a symbolic link to the assembly file corresponding to the processor and the C++ compiler used. This assembly file contains routines which are frequently called in the CADNA_C C++ files to change the rounding mode. The C++ language files contain the definition of the stochastic types on which the control of accuracy can be performed, CADNA_C specific functions (for instance to enable or disable the detection of numerical instabilities), the definition of arithmetic and relational operators which are overloaded for stochastic variables and the definition of mathematical functions which can be used with stochastic arguments. As a remark, on 64-bit processors, the mathematical library associated with the GNU C++ compiler may provide incorrect results or generate severe bugs with rounding towards -∞ and +∞, which the random rounding mode is based on. Therefore, if CADNA_C is used on a 64-bit processor with the GNU C++ compiler, mathematical functions are computed with rounding to the nearest, otherwise they are computed with the random rounding mode. It must be pointed out that the knowledge of the accuracy of the argument of a mathematical function is never lost. Additional comments: In the library archive, users are advised to read the INSTALL file first. The doc directory contains a user guide named ug.cadna.pdf and a reference guide named, ref_cadna.pdf. The user guide shows how to control the numerical accuracy of a program using CADNA, provides installation instructions and describes test runs.The reference guide briefly describes each function of the library. The source code (which consists of C++ and assembly files) is located in the src directory. The examples directory contains seven test runs which illustrate the use of the CADNA library and the benefits of Discrete Stochastic Arithmetic. Running time: The version of a code which uses CADNA runs at least three times slower than its floating-point version. This cost depends on the computer architecture and can be higher if the detection of numerical instabilities is enabled. In this case, the cost may be related to the number of instabilities detected.

NCRETURN Computer Program for Evaluating Investments Revised to Provide Additional Information

Treesearch

Allen L. Lundgren; Dennis L. Schweitzer

1971-01-01

Reports a modified version of NCRETURN, a computer program for evauating forestry investments. The revised version, RETURN, provides additional information about each investment, including future net worths and benefit-cost ratios, with no added input.

Development of a User Interface for a Regression Analysis Software Tool

NASA Technical Reports Server (NTRS)

Ulbrich, Norbert Manfred; Volden, Thomas R.

2010-01-01

An easy-to -use user interface was implemented in a highly automated regression analysis tool. The user interface was developed from the start to run on computers that use the Windows, Macintosh, Linux, or UNIX operating system. Many user interface features were specifically designed such that a novice or inexperienced user can apply the regression analysis tool with confidence. Therefore, the user interface s design minimizes interactive input from the user. In addition, reasonable default combinations are assigned to those analysis settings that influence the outcome of the regression analysis. These default combinations will lead to a successful regression analysis result for most experimental data sets. The user interface comes in two versions. The text user interface version is used for the ongoing development of the regression analysis tool. The official release of the regression analysis tool, on the other hand, has a graphical user interface that is more efficient to use. This graphical user interface displays all input file names, output file names, and analysis settings for a specific software application mode on a single screen which makes it easier to generate reliable analysis results and to perform input parameter studies. An object-oriented approach was used for the development of the graphical user interface. This choice keeps future software maintenance costs to a reasonable limit. Examples of both the text user interface and graphical user interface are discussed in order to illustrate the user interface s overall design approach.

An adaptive maneuvering logic computer program for the simulation of one-on-one air-to-air combat. Volume 1: General description

NASA Technical Reports Server (NTRS)

Burgin, G. H.; Fogel, L. J.; Phelps, J. P.

1975-01-01

A technique for computer simulation of air combat is described. Volume 1 decribes the computer program and its development in general terms. Two versions of the program exist. Both incorporate a logic for selecting and executing air combat maneuvers with performance models of specific fighter aircraft. In the batch processing version the flight paths of two aircraft engaged in interactive aerial combat and controlled by the same logic are computed. The realtime version permits human pilots to fly air-to-air combat against the adaptive maneuvering logic (AML) in Langley Differential Maneuvering Simulator (DMS). Volume 2 consists of a detailed description of the computer programs.

Unit Cohesion and the Surface Navy: Does Cohesion Affect Performance

DTIC Science & Technology

1989-12-01

v. 68, 1968. Neter, J., Wasserman, W., and Kutner, M. H., Applied Linear Regression Models, 2d ed., Boston, MA: Irwin, 1989. Rand Corporation R-2607...Neter, J., Wasserman, W., and Kutner, M. H., Applied Linear Regression Models, 2d ed., Boston, MA: Irwin, 1989. SAS User’s Guide: Basics, Version 5 ed

MODIFIED N.R.C. VERSION OF THE U.S.G.S. SOLUTE TRANSPORT MODEL. VOLUME 2. INTERACTIVE PREPROCESSOR PROGRAM

EPA Science Inventory

The methods described in the report can be used with the modified N.R.C. version of the U.S.G.S. Solute Transport Model to predict the concentration of chemical parameters in a contaminant plume. The two volume report contains program documentation and user's manual. The program ...

Multithreaded transactions in scientific computing. The Growth06_v2 program

NASA Astrophysics Data System (ADS)

Daniluk, Andrzej

2009-07-01

Writing a concurrent program can be more difficult than writing a sequential program. Programmer needs to think about synchronization, race conditions and shared variables. Transactions help reduce the inconvenience of using threads. A transaction is an abstraction, which allows programmers to group a sequence of actions on the program into a logical, higher-level computation unit. This paper presents a new version of the GROWTHGr and GROWTH06 programs. New version program summaryProgram title: GROWTH06_v2 Catalogue identifier: ADVL_v2_1 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADVL_v2_1.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 65 255 No. of bytes in distributed program, including test data, etc.: 865 985 Distribution format: tar.gz Programming language: Object Pascal Computer: Pentium-based PC Operating system: Windows 9x, XP, NT, Vista RAM: more than 1 MB Classification: 4.3, 7.2, 6.2, 8, 14 Catalogue identifier of previous version: ADVL_v2_0 Journal reference of previous version: Comput. Phys. Comm. 175 (2006) 678 Does the new version supersede the previous version?: Yes Nature of problem: The programs compute the RHEED intensities during the growth of thin epitaxial structures prepared using the molecular beam epitaxy (MBE). The computations are based on the use of kinematical diffraction theory. Solution method: Epitaxial growth of thin films is modelled by a set of non-linear differential equations [1]. The Runge-Kutta method with adaptive stepsize control was used for solving initial value problem for non-linear differential equations [2]. Reasons for new version: According to the users' suggestions functionality of the program has been improved. Moreover, new use cases have been added which make the handling of the program easier and more efficient than the previous ones [3]. Summary of revisions:The design pattern (See Fig. 2 of Ref. [3]) has been modified according to the scheme shown on Fig. 1. A graphical user interface (GUI) for the program has been reconstructed. Fig. 2 presents a hybrid diagram of a GUI that shows how onscreen objects connect to use cases. The program has been compiled with English/USA regional and language options. Note: The figures mentioned above are contained in the program distribution file. Unusual features: The program is distributed in the form of source project GROWTH06_v2.dpr with associated files, and should be compiled using Borland Delphi compilers versions 6 or latter (including Borland Developer Studio 2006 and Code Gear compilers for Delphi). Additional comments: Two figures are included in the program distribution file. These are captioned Static classes model for Transaction design pattern. A model of a window that shows how onscreen objects connect to use cases. Running time: The typical running time is machine and user-parameters dependent. References: [1] A. Daniluk, Comput. Phys. Comm. 170 (2005) 265. [2] W.H. Press, B.P. Flannery, S.A. Teukolsky, W.T. Vetterling, Numerical Recipes in Pascal: The Art of Scientific Computing, first ed., Cambridge University Press, 1989. [3] M. Brzuszek, A. Daniluk, Comput. Phys. Comm. 175 (2006) 678.

Invariance levels across language versions of the PISA 2009 reading comprehension tests in Spain.

PubMed

Elosua Oliden, Paula; Mujika Lizaso, Josu

2013-01-01

The PISA project provides the basis for studying curriculum design and for comparing factors associated with school effectiveness. These studies are only valid if the different language versions are equivalent to each other. In Spain, the application of PISA in autonomous regions with their own languages means that equivalency must also be extended to the Spanish, Galician, Catalan and Basque versions of the test. The aim of this work was to analyse the equivalence among the four language versions of the Reading Comprehension Test (PISA 2009). After defining the testlet as the unit of analysis, equivalence among the language versions was analysed using two invariance testing procedures: multiple-group mean and covariance structure analyses for ordinal data and ordinal logistic regression. The procedures yielded concordant results supporting metric equivalence across all four language versions: Spanish, Basque, Galician and Catalan. The equivalence supports the estimated reading literacy score comparability among the language versions used in Spain.

CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (UNIX VERSION)

NASA Technical Reports Server (NTRS)

Donnell, B.

1994-01-01

CLIPS, the C Language Integrated Production System, is a complete environment for developing expert systems -- programs which are specifically intended to model human expertise or knowledge. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. CLIPS 6.0 provides a cohesive tool for handling a wide variety of knowledge with support for three different programming paradigms: rule-based, object-oriented, and procedural. Rule-based programming allows knowledge to be represented as heuristics, or "rules-of-thumb" which specify a set of actions to be performed for a given situation. Object-oriented programming allows complex systems to be modeled as modular components (which can be easily reused to model other systems or create new components). The procedural programming capabilities provided by CLIPS 6.0 allow CLIPS to represent knowledge in ways similar to those allowed in languages such as C, Pascal, Ada, and LISP. Using CLIPS 6.0, one can develop expert system software using only rule-based programming, only object-oriented programming, only procedural programming, or combinations of the three. CLIPS provides extensive features to support the rule-based programming paradigm including seven conflict resolution strategies, dynamic rule priorities, and truth maintenance. CLIPS 6.0 supports more complex nesting of conditional elements in the if portion of a rule ("and", "or", and "not" conditional elements can be placed within a "not" conditional element). In addition, there is no longer a limitation on the number of multifield slots that a deftemplate can contain. The CLIPS Object-Oriented Language (COOL) provides object-oriented programming capabilities. Features supported by COOL include classes with multiple inheritance, abstraction, encapsulation, polymorphism, dynamic binding, and message passing with message-handlers. CLIPS 6.0 supports tight integration of the rule-based programming features of CLIPS with COOL (that is, a rule can pattern match on objects created using COOL). CLIPS 6.0 provides the capability to define functions, overloaded functions, and global variables interactively. In addition, CLIPS can be embedded within procedural code, called as a subroutine, and integrated with languages such as C, FORTRAN and Ada. CLIPS can be easily extended by a user through the use of several well-defined protocols. CLIPS provides several delivery options for programs including the ability to generate stand alone executables or to load programs from text or binary files. CLIPS 6.0 provides support for the modular development and execution of knowledge bases with the defmodule construct. CLIPS modules allow a set of constructs to be grouped together such that explicit control can be maintained over restricting the access of the constructs by other modules. This type of control is similar to global and local scoping used in languages such as C or Ada. By restricting access to deftemplate and defclass constructs, modules can function as blackboards, permitting only certain facts and instances to be seen by other modules. Modules are also used by rules to provide execution control. The CRSV (Cross-Reference, Style, and Verification) utility included with previous version of CLIPS is no longer supported. The capabilities provided by this tool are now available directly within CLIPS 6.0 to aid in the development, debugging, and verification of large rule bases. COSMIC offers four distribution versions of CLIPS 6.0: UNIX (MSC-22433), VMS (MSC-22434), MACINTOSH (MSC-22429), and IBM PC (MSC-22430). Executable files, source code, utilities, documentation, and examples are included on the program media. All distribution versions include identical source code for the command line version of CLIPS 6.0. This source code should compile on any platform with an ANSI C compiler. Each distribution version of CLIPS 6.0, except that for the Macintosh platform, includes an executable for the command line version. For the UNIX version of CLIPS 6.0, the command line interface has been successfully implemented on a Sun4 running SunOS, a DECstation running DEC RISC ULTRIX, an SGI Indigo Elan running IRIX, a DEC Alpha AXP running OSF/1, and an IBM RS/6000 running AIX. Command line interface executables are included for Sun4 computers running SunOS 4.1.1 or later and for the DEC RISC ULTRIX platform. The makefiles may have to be modified slightly to be used on other UNIX platforms. The UNIX, Macintosh, and IBM PC versions of CLIPS 6.0 each have a platform specific interface. Source code, a makefile, and an executable for the Windows 3.1 interface version of CLIPS 6.0 are provided only on the IBM PC distribution diskettes. Source code, a makefile, and an executable for the Macintosh interface version of CLIPS 6.0 are provided only on the Macintosh distribution diskettes. Likewise, for the UNIX version of CLIPS 6.0, only source code and a makefile for an X-Windows interface are provided. The X-Windows interface requires MIT's X Window System, Version 11, Release 4 (X11R4), the Athena Widget Set, and the Xmu library. The source code for the Athena Widget Set is provided on the distribution medium. The X-Windows interface has been successfully implemented on a Sun4 running SunOS 4.1.2 with the MIT distribution of X11R4 (not OpenWindows), an SGI Indigo Elan running IRIX 4.0.5, and a DEC Alpha AXP running OSF/1 1.2. The VAX version of CLIPS 6.0 comes only with the generic command line interface. ASCII makefiles for the command line version of CLIPS are provided on all the distribution media for UNIX, VMS, and DOS. Four executables are provided with the IBM PC version: a windowed interface executable for Windows 3.1 built using Borland C++ v3.1, an editor for use with the windowed interface, a command line version of CLIPS for Windows 3.1, and a 386 command line executable for DOS built using Zortech C++ v3.1. All four executables are capable of utilizing extended memory and require an 80386 CPU or better. Users needing an 8086/8088 or 80286 executable must recompile the CLIPS source code themselves. Users who wish to recompile the DOS executable using Borland C++ or MicroSoft C must use a DOS extender program to produce an executable capable of using extended memory. The version of CLIPS 6.0 for IBM PC compatibles requires DOS v3.3 or later and/or Windows 3.1 or later. It is distributed on a set of three 1.4Mb 3.5 inch diskettes. A hard disk is required. The Macintosh version is distributed in compressed form on two 3.5 inch 1.4Mb Macintosh format diskettes, and requires System 6.0.5, or higher, and 1Mb RAM. The version for DEC VAX/VMS is available in VAX BACKUP format on a 1600 BPI 9-track magnetic tape (standard distribution medium) or a TK50 tape cartridge. The UNIX version is distributed in UNIX tar format on a .25 inch streaming magnetic tape cartridge (Sun QIC-24). For the UNIX version, alternate distribution media and formats are available upon request. The CLIPS 6.0 documentation includes a User's Guide and a three volume Reference Manual consisting of Basic and Advanced Programming Guides and an Interfaces Guide. An electronic version of the documentation is provided on the distribution medium for each version: in MicroSoft Word format for the Macintosh and PC versions of CLIPS, and in both PostScript format and MicroSoft Word for Macintosh format for the UNIX and DEC VAX versions of CLIPS. CLIPS was developed in 1986 and Version 6.0 was released in 1993.

CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (IBM PC VERSION)

NASA Technical Reports Server (NTRS)

Donnell, B.

1994-01-01

CLIPS, the C Language Integrated Production System, is a complete environment for developing expert systems -- programs which are specifically intended to model human expertise or knowledge. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. CLIPS 6.0 provides a cohesive tool for handling a wide variety of knowledge with support for three different programming paradigms: rule-based, object-oriented, and procedural. Rule-based programming allows knowledge to be represented as heuristics, or "rules-of-thumb" which specify a set of actions to be performed for a given situation. Object-oriented programming allows complex systems to be modeled as modular components (which can be easily reused to model other systems or create new components). The procedural programming capabilities provided by CLIPS 6.0 allow CLIPS to represent knowledge in ways similar to those allowed in languages such as C, Pascal, Ada, and LISP. Using CLIPS 6.0, one can develop expert system software using only rule-based programming, only object-oriented programming, only procedural programming, or combinations of the three. CLIPS provides extensive features to support the rule-based programming paradigm including seven conflict resolution strategies, dynamic rule priorities, and truth maintenance. CLIPS 6.0 supports more complex nesting of conditional elements in the if portion of a rule ("and", "or", and "not" conditional elements can be placed within a "not" conditional element). In addition, there is no longer a limitation on the number of multifield slots that a deftemplate can contain. The CLIPS Object-Oriented Language (COOL) provides object-oriented programming capabilities. Features supported by COOL include classes with multiple inheritance, abstraction, encapsulation, polymorphism, dynamic binding, and message passing with message-handlers. CLIPS 6.0 supports tight integration of the rule-based programming features of CLIPS with COOL (that is, a rule can pattern match on objects created using COOL). CLIPS 6.0 provides the capability to define functions, overloaded functions, and global variables interactively. In addition, CLIPS can be embedded within procedural code, called as a subroutine, and integrated with languages such as C, FORTRAN and Ada. CLIPS can be easily extended by a user through the use of several well-defined protocols. CLIPS provides several delivery options for programs including the ability to generate stand alone executables or to load programs from text or binary files. CLIPS 6.0 provides support for the modular development and execution of knowledge bases with the defmodule construct. CLIPS modules allow a set of constructs to be grouped together such that explicit control can be maintained over restricting the access of the constructs by other modules. This type of control is similar to global and local scoping used in languages such as C or Ada. By restricting access to deftemplate and defclass constructs, modules can function as blackboards, permitting only certain facts and instances to be seen by other modules. Modules are also used by rules to provide execution control. The CRSV (Cross-Reference, Style, and Verification) utility included with previous version of CLIPS is no longer supported. The capabilities provided by this tool are now available directly within CLIPS 6.0 to aid in the development, debugging, and verification of large rule bases. COSMIC offers four distribution versions of CLIPS 6.0: UNIX (MSC-22433), VMS (MSC-22434), MACINTOSH (MSC-22429), and IBM PC (MSC-22430). Executable files, source code, utilities, documentation, and examples are included on the program media. All distribution versions include identical source code for the command line version of CLIPS 6.0. This source code should compile on any platform with an ANSI C compiler. Each distribution version of CLIPS 6.0, except that for the Macintosh platform, includes an executable for the command line version. For the UNIX version of CLIPS 6.0, the command line interface has been successfully implemented on a Sun4 running SunOS, a DECstation running DEC RISC ULTRIX, an SGI Indigo Elan running IRIX, a DEC Alpha AXP running OSF/1, and an IBM RS/6000 running AIX. Command line interface executables are included for Sun4 computers running SunOS 4.1.1 or later and for the DEC RISC ULTRIX platform. The makefiles may have to be modified slightly to be used on other UNIX platforms. The UNIX, Macintosh, and IBM PC versions of CLIPS 6.0 each have a platform specific interface. Source code, a makefile, and an executable for the Windows 3.1 interface version of CLIPS 6.0 are provided only on the IBM PC distribution diskettes. Source code, a makefile, and an executable for the Macintosh interface version of CLIPS 6.0 are provided only on the Macintosh distribution diskettes. Likewise, for the UNIX version of CLIPS 6.0, only source code and a makefile for an X-Windows interface are provided. The X-Windows interface requires MIT's X Window System, Version 11, Release 4 (X11R4), the Athena Widget Set, and the Xmu library. The source code for the Athena Widget Set is provided on the distribution medium. The X-Windows interface has been successfully implemented on a Sun4 running SunOS 4.1.2 with the MIT distribution of X11R4 (not OpenWindows), an SGI Indigo Elan running IRIX 4.0.5, and a DEC Alpha AXP running OSF/1 1.2. The VAX version of CLIPS 6.0 comes only with the generic command line interface. ASCII makefiles for the command line version of CLIPS are provided on all the distribution media for UNIX, VMS, and DOS. Four executables are provided with the IBM PC version: a windowed interface executable for Windows 3.1 built using Borland C++ v3.1, an editor for use with the windowed interface, a command line version of CLIPS for Windows 3.1, and a 386 command line executable for DOS built using Zortech C++ v3.1. All four executables are capable of utilizing extended memory and require an 80386 CPU or better. Users needing an 8086/8088 or 80286 executable must recompile the CLIPS source code themselves. Users who wish to recompile the DOS executable using Borland C++ or MicroSoft C must use a DOS extender program to produce an executable capable of using extended memory. The version of CLIPS 6.0 for IBM PC compatibles requires DOS v3.3 or later and/or Windows 3.1 or later. It is distributed on a set of three 1.4Mb 3.5 inch diskettes. A hard disk is required. The Macintosh version is distributed in compressed form on two 3.5 inch 1.4Mb Macintosh format diskettes, and requires System 6.0.5, or higher, and 1Mb RAM. The version for DEC VAX/VMS is available in VAX BACKUP format on a 1600 BPI 9-track magnetic tape (standard distribution medium) or a TK50 tape cartridge. The UNIX version is distributed in UNIX tar format on a .25 inch streaming magnetic tape cartridge (Sun QIC-24). For the UNIX version, alternate distribution media and formats are available upon request. The CLIPS 6.0 documentation includes a User's Guide and a three volume Reference Manual consisting of Basic and Advanced Programming Guides and an Interfaces Guide. An electronic version of the documentation is provided on the distribution medium for each version: in MicroSoft Word format for the Macintosh and PC versions of CLIPS, and in both PostScript format and MicroSoft Word for Macintosh format for the UNIX and DEC VAX versions of CLIPS. CLIPS was developed in 1986 and Version 6.0 was released in 1993.

CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (MACINTOSH VERSION)

NASA Technical Reports Server (NTRS)

Riley, G.

1994-01-01

CLIPS, the C Language Integrated Production System, is a complete environment for developing expert systems -- programs which are specifically intended to model human expertise or knowledge. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. CLIPS 6.0 provides a cohesive tool for handling a wide variety of knowledge with support for three different programming paradigms: rule-based, object-oriented, and procedural. Rule-based programming allows knowledge to be represented as heuristics, or "rules-of-thumb" which specify a set of actions to be performed for a given situation. Object-oriented programming allows complex systems to be modeled as modular components (which can be easily reused to model other systems or create new components). The procedural programming capabilities provided by CLIPS 6.0 allow CLIPS to represent knowledge in ways similar to those allowed in languages such as C, Pascal, Ada, and LISP. Using CLIPS 6.0, one can develop expert system software using only rule-based programming, only object-oriented programming, only procedural programming, or combinations of the three. CLIPS provides extensive features to support the rule-based programming paradigm including seven conflict resolution strategies, dynamic rule priorities, and truth maintenance. CLIPS 6.0 supports more complex nesting of conditional elements in the if portion of a rule ("and", "or", and "not" conditional elements can be placed within a "not" conditional element). In addition, there is no longer a limitation on the number of multifield slots that a deftemplate can contain. The CLIPS Object-Oriented Language (COOL) provides object-oriented programming capabilities. Features supported by COOL include classes with multiple inheritance, abstraction, encapsulation, polymorphism, dynamic binding, and message passing with message-handlers. CLIPS 6.0 supports tight integration of the rule-based programming features of CLIPS with COOL (that is, a rule can pattern match on objects created using COOL). CLIPS 6.0 provides the capability to define functions, overloaded functions, and global variables interactively. In addition, CLIPS can be embedded within procedural code, called as a subroutine, and integrated with languages such as C, FORTRAN and Ada. CLIPS can be easily extended by a user through the use of several well-defined protocols. CLIPS provides several delivery options for programs including the ability to generate stand alone executables or to load programs from text or binary files. CLIPS 6.0 provides support for the modular development and execution of knowledge bases with the defmodule construct. CLIPS modules allow a set of constructs to be grouped together such that explicit control can be maintained over restricting the access of the constructs by other modules. This type of control is similar to global and local scoping used in languages such as C or Ada. By restricting access to deftemplate and defclass constructs, modules can function as blackboards, permitting only certain facts and instances to be seen by other modules. Modules are also used by rules to provide execution control. The CRSV (Cross-Reference, Style, and Verification) utility included with previous version of CLIPS is no longer supported. The capabilities provided by this tool are now available directly within CLIPS 6.0 to aid in the development, debugging, and verification of large rule bases. COSMIC offers four distribution versions of CLIPS 6.0: UNIX (MSC-22433), VMS (MSC-22434), MACINTOSH (MSC-22429), and IBM PC (MSC-22430). Executable files, source code, utilities, documentation, and examples are included on the program media. All distribution versions include identical source code for the command line version of CLIPS 6.0. This source code should compile on any platform with an ANSI C compiler. Each distribution version of CLIPS 6.0, except that for the Macintosh platform, includes an executable for the command line version. For the UNIX version of CLIPS 6.0, the command line interface has been successfully implemented on a Sun4 running SunOS, a DECstation running DEC RISC ULTRIX, an SGI Indigo Elan running IRIX, a DEC Alpha AXP running OSF/1, and an IBM RS/6000 running AIX. Command line interface executables are included for Sun4 computers running SunOS 4.1.1 or later and for the DEC RISC ULTRIX platform. The makefiles may have to be modified slightly to be used on other UNIX platforms. The UNIX, Macintosh, and IBM PC versions of CLIPS 6.0 each have a platform specific interface. Source code, a makefile, and an executable for the Windows 3.1 interface version of CLIPS 6.0 are provided only on the IBM PC distribution diskettes. Source code, a makefile, and an executable for the Macintosh interface version of CLIPS 6.0 are provided only on the Macintosh distribution diskettes. Likewise, for the UNIX version of CLIPS 6.0, only source code and a makefile for an X-Windows interface are provided. The X-Windows interface requires MIT's X Window System, Version 11, Release 4 (X11R4), the Athena Widget Set, and the Xmu library. The source code for the Athena Widget Set is provided on the distribution medium. The X-Windows interface has been successfully implemented on a Sun4 running SunOS 4.1.2 with the MIT distribution of X11R4 (not OpenWindows), an SGI Indigo Elan running IRIX 4.0.5, and a DEC Alpha AXP running OSF/1 1.2. The VAX version of CLIPS 6.0 comes only with the generic command line interface. ASCII makefiles for the command line version of CLIPS are provided on all the distribution media for UNIX, VMS, and DOS. Four executables are provided with the IBM PC version: a windowed interface executable for Windows 3.1 built using Borland C++ v3.1, an editor for use with the windowed interface, a command line version of CLIPS for Windows 3.1, and a 386 command line executable for DOS built using Zortech C++ v3.1. All four executables are capable of utilizing extended memory and require an 80386 CPU or better. Users needing an 8086/8088 or 80286 executable must recompile the CLIPS source code themselves. Users who wish to recompile the DOS executable using Borland C++ or MicroSoft C must use a DOS extender program to produce an executable capable of using extended memory. The version of CLIPS 6.0 for IBM PC compatibles requires DOS v3.3 or later and/or Windows 3.1 or later. It is distributed on a set of three 1.4Mb 3.5 inch diskettes. A hard disk is required. The Macintosh version is distributed in compressed form on two 3.5 inch 1.4Mb Macintosh format diskettes, and requires System 6.0.5, or higher, and 1Mb RAM. The version for DEC VAX/VMS is available in VAX BACKUP format on a 1600 BPI 9-track magnetic tape (standard distribution medium) or a TK50 tape cartridge. The UNIX version is distributed in UNIX tar format on a .25 inch streaming magnetic tape cartridge (Sun QIC-24). For the UNIX version, alternate distribution media and formats are available upon request. The CLIPS 6.0 documentation includes a User's Guide and a three volume Reference Manual consisting of Basic and Advanced Programming Guides and an Interfaces Guide. An electronic version of the documentation is provided on the distribution medium for each version: in MicroSoft Word format for the Macintosh and PC versions of CLIPS, and in both PostScript format and MicroSoft Word for Macintosh format for the UNIX and DEC VAX versions of CLIPS. CLIPS was developed in 1986 and Version 6.0 was released in 1993.

CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (DEC VAX VMS VERSION)

NASA Technical Reports Server (NTRS)

Donnell, B.

1994-01-01

CLIPS, the C Language Integrated Production System, is a complete environment for developing expert systems -- programs which are specifically intended to model human expertise or knowledge. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. CLIPS 6.0 provides a cohesive tool for handling a wide variety of knowledge with support for three different programming paradigms: rule-based, object-oriented, and procedural. Rule-based programming allows knowledge to be represented as heuristics, or "rules-of-thumb" which specify a set of actions to be performed for a given situation. Object-oriented programming allows complex systems to be modeled as modular components (which can be easily reused to model other systems or create new components). The procedural programming capabilities provided by CLIPS 6.0 allow CLIPS to represent knowledge in ways similar to those allowed in languages such as C, Pascal, Ada, and LISP. Using CLIPS 6.0, one can develop expert system software using only rule-based programming, only object-oriented programming, only procedural programming, or combinations of the three. CLIPS provides extensive features to support the rule-based programming paradigm including seven conflict resolution strategies, dynamic rule priorities, and truth maintenance. CLIPS 6.0 supports more complex nesting of conditional elements in the if portion of a rule ("and", "or", and "not" conditional elements can be placed within a "not" conditional element). In addition, there is no longer a limitation on the number of multifield slots that a deftemplate can contain. The CLIPS Object-Oriented Language (COOL) provides object-oriented programming capabilities. Features supported by COOL include classes with multiple inheritance, abstraction, encapsulation, polymorphism, dynamic binding, and message passing with message-handlers. CLIPS 6.0 supports tight integration of the rule-based programming features of CLIPS with COOL (that is, a rule can pattern match on objects created using COOL). CLIPS 6.0 provides the capability to define functions, overloaded functions, and global variables interactively. In addition, CLIPS can be embedded within procedural code, called as a subroutine, and integrated with languages such as C, FORTRAN and Ada. CLIPS can be easily extended by a user through the use of several well-defined protocols. CLIPS provides several delivery options for programs including the ability to generate stand alone executables or to load programs from text or binary files. CLIPS 6.0 provides support for the modular development and execution of knowledge bases with the defmodule construct. CLIPS modules allow a set of constructs to be grouped together such that explicit control can be maintained over restricting the access of the constructs by other modules. This type of control is similar to global and local scoping used in languages such as C or Ada. By restricting access to deftemplate and defclass constructs, modules can function as blackboards, permitting only certain facts and instances to be seen by other modules. Modules are also used by rules to provide execution control. The CRSV (Cross-Reference, Style, and Verification) utility included with previous version of CLIPS is no longer supported. The capabilities provided by this tool are now available directly within CLIPS 6.0 to aid in the development, debugging, and verification of large rule bases. COSMIC offers four distribution versions of CLIPS 6.0: UNIX (MSC-22433), VMS (MSC-22434), MACINTOSH (MSC-22429), and IBM PC (MSC-22430). Executable files, source code, utilities, documentation, and examples are included on the program media. All distribution versions include identical source code for the command line version of CLIPS 6.0. This source code should compile on any platform with an ANSI C compiler. Each distribution version of CLIPS 6.0, except that for the Macintosh platform, includes an executable for the command line version. For the UNIX version of CLIPS 6.0, the command line interface has been successfully implemented on a Sun4 running SunOS, a DECstation running DEC RISC ULTRIX, an SGI Indigo Elan running IRIX, a DEC Alpha AXP running OSF/1, and an IBM RS/6000 running AIX. Command line interface executables are included for Sun4 computers running SunOS 4.1.1 or later and for the DEC RISC ULTRIX platform. The makefiles may have to be modified slightly to be used on other UNIX platforms. The UNIX, Macintosh, and IBM PC versions of CLIPS 6.0 each have a platform specific interface. Source code, a makefile, and an executable for the Windows 3.1 interface version of CLIPS 6.0 are provided only on the IBM PC distribution diskettes. Source code, a makefile, and an executable for the Macintosh interface version of CLIPS 6.0 are provided only on the Macintosh distribution diskettes. Likewise, for the UNIX version of CLIPS 6.0, only source code and a makefile for an X-Windows interface are provided. The X-Windows interface requires MIT's X Window System, Version 11, Release 4 (X11R4), the Athena Widget Set, and the Xmu library. The source code for the Athena Widget Set is provided on the distribution medium. The X-Windows interface has been successfully implemented on a Sun4 running SunOS 4.1.2 with the MIT distribution of X11R4 (not OpenWindows), an SGI Indigo Elan running IRIX 4.0.5, and a DEC Alpha AXP running OSF/1 1.2. The VAX version of CLIPS 6.0 comes only with the generic command line interface. ASCII makefiles for the command line version of CLIPS are provided on all the distribution media for UNIX, VMS, and DOS. Four executables are provided with the IBM PC version: a windowed interface executable for Windows 3.1 built using Borland C++ v3.1, an editor for use with the windowed interface, a command line version of CLIPS for Windows 3.1, and a 386 command line executable for DOS built using Zortech C++ v3.1. All four executables are capable of utilizing extended memory and require an 80386 CPU or better. Users needing an 8086/8088 or 80286 executable must recompile the CLIPS source code themselves. Users who wish to recompile the DOS executable using Borland C++ or MicroSoft C must use a DOS extender program to produce an executable capable of using extended memory. The version of CLIPS 6.0 for IBM PC compatibles requires DOS v3.3 or later and/or Windows 3.1 or later. It is distributed on a set of three 1.4Mb 3.5 inch diskettes. A hard disk is required. The Macintosh version is distributed in compressed form on two 3.5 inch 1.4Mb Macintosh format diskettes, and requires System 6.0.5, or higher, and 1Mb RAM. The version for DEC VAX/VMS is available in VAX BACKUP format on a 1600 BPI 9-track magnetic tape (standard distribution medium) or a TK50 tape cartridge. The UNIX version is distributed in UNIX tar format on a .25 inch streaming magnetic tape cartridge (Sun QIC-24). For the UNIX version, alternate distribution media and formats are available upon request. The CLIPS 6.0 documentation includes a User's Guide and a three volume Reference Manual consisting of Basic and Advanced Programming Guides and an Interfaces Guide. An electronic version of the documentation is provided on the distribution medium for each version: in MicroSoft Word format for the Macintosh and PC versions of CLIPS, and in both PostScript format and MicroSoft Word for Macintosh format for the UNIX and DEC VAX versions of CLIPS. CLIPS was developed in 1986 and Version 6.0 was released in 1993.

[Aggression and related factors in elementary school students].

PubMed

Ji, Eun Sun; Jang, Mi Heui

2010-10-01

This study was done to explore the relationship between aggression and internet over-use, depression-anxiety, self-esteem, all of which are known to be behavior and psychological characteristics linked to "at-risk" children for aggression. Korean-Child Behavior Check List (K-CBCL), Korean-Internet Addiction Self-Test Scale, and Self-Esteem Scale by Rosenberg (1965) were used as measurement tools with a sample of 743, 5th-6th grade students from 3 elementary schools in Jecheon city. Chi-square, t-test, ANOVA, Pearson's correlation and stepwise multiple regression with SPSS/Win 13.0 version were used to analyze the collected data. Aggression for the elementary school students was positively correlated with internet over-use and depression-anxiety, whereas self-esteem was negatively correlated with aggression. Stepwise multiple regression analysis showed that 68.4% of the variance for aggression was significantly accounted for by internet over-use, depression-anxiety, and self-esteem. The most significant factor influencing aggression was depression-anxiety. These results suggest that earlier screening and intervention programs for depression-anxiety and internet over-use for elementary student will be helpful in preventing aggression.

A study on Turkish adolescent's Internet use: possible predictors of Internet addiction.

PubMed

Ak, Serife; Koruklu, Nermin; Yılmaz, Yusuf

2013-03-01

The purpose of this study is to investigate the internet use of Turkish adolescents, with a (particular) focus on the risk of Internet addiction. A web-based questionnaire was completed by a total of 4,311 adolescents attending public high schools in grades 9-12, in a small-sized city in western Turkey. Ages ranged from 15 to 19 years, 54 percent were female and 46 percent male. The questionnaire included items on sociodemographic information, Internet usage, and a Turkish version of the Young's Internet Addiction Test. The data were analyzed in SPPS 15.0 program using the t test, the Mann-Whitney U test, correlation and hierarchic regression analysis. The findings show that, regardless of gender, Facebook ranked highest in the classification of students' purpose of Internet use; it was also found that females mainly used the Internet for communication, whereas males were more interested in playing online games and reading newspapers and magazines. The results of hierarchic regression analysis indicated that the significant predictors of the internet addiction were the presence of Internet access at home, gender, and family income levels.

An Improved Version of the NASA-Lockheed Multielement Airfoil Analysis Computer Program

NASA Technical Reports Server (NTRS)

Brune, G. W.; Manke, J. W.

1978-01-01

An improved version of the NASA-Lockheed computer program for the analysis of multielement airfoils is described. The predictions of the program are evaluated by comparison with recent experimental high lift data including lift, pitching moment, profile drag, and detailed distributions of surface pressures and boundary layer parameters. The results of the evaluation show that the contract objectives of improving program reliability and accuracy have been met.

Digital Systems Validation Handbook. Volume 2. Chapter 18. Avionic Data Bus Integration Technology

DTIC Science & Technology

1993-11-01

interaction between a digital data bus and an avionic system. Very Large Scale Integration (VLSI) ICs and multiversion software, which make up digital...1984, the Sperry Corporation developed a fault tolerant system which employed multiversion programming, voting, and monitoring for error detection and...formulate all the significant behavior of a system. MULTIVERSION PROGRAMMING. N-version programming. N-VERSION PROGRAMMING. The independent coding of a

Factors Affecting Regression-Discontinuity.

ERIC Educational Resources Information Center

Schumacker, Randall E.

The regression-discontinuity approach to evaluating educational programs is reviewed, and regression-discontinuity post-program mean differences under various conditions are discussed. The regression-discontinuity design is used to determine whether post-program differences exist between an experimental program and a control group. The difference…

Parent Engagement With a Telehealth-Based Parent-Mediated Intervention Program for Children With Autism Spectrum Disorders: Predictors of Program Use and Parent Outcomes

PubMed Central

Berger, Natalie I

2015-01-01

Background There has been growing interest in using telehealth to increase access to parent-mediated interventions for children with ASD. However, little is known about how parents engage with such programs. Objective This paper presents program engagement data from a pilot study comparing self-directed and therapist-assisted versions of a novel telehealth-based parent-mediated intervention for young children with autism spectrum disorders (ASD). Methods Parents of young children with ASD were randomly assigned to receive a self-directed or therapist-assisted version of ImPACT Online. Parent engagement and satisfaction with the different components of the program website were examined using the program’s automated data collection and a post-treatment evaluation survey. We examined the relationship between program engagement and changes in parent knowledge and implementation and participant characteristics associated with program engagement. Results Of the 27 parent participants, the majority were female (26/27, 96%), married (22/27, 81%), with a college degree or higher (15/27, 56%), and less than half were not employed outside of the home (10/27, 37%). The mean chronological age of the child participants was 43.26 months, and the majority were male (19/27, 70%) and white (21/27, 78%). Most of the families (19/27, 70%) resided in a rural or medically underserved area. Parents logged into the website an average of 46.85 times, spent an average of 964.70 minutes on the site, and completed an average of 90.17% of the lesson learning activities. Participants in the therapist-assisted group were more likely to engage with the website than those in the self-directed group: F 2,24=17.65, P<.001. In total, 85% of participants completed the program, with a significantly greater completion rate in the therapist-assisted group (N=27): χ2 1=5.06, P=.03. Lesson learning activities were visited significantly more often than the supplemental activities (all Ps<.05). Multiple regression controlling for pretreatment performance indicated that program completion (beta=.51, P=.02) predicted post-treatment intervention knowledge, and program completion (beta=.43, P=.03) and group assignment (beta=-.37, P=.045) predicted post-treatment intervention fidelity. Partial correlations indicated that parent depressive symptoms at pretreatment were negatively associated with program completion (r=-.40, P=.04), but other key parent and child demographic factors were not. Post-treatment measures of website usability (r=.65, P<.001), treatment acceptability (r=.58, P=.002), and overall satisfaction (r=.58, P=.002) were all related to program completion. Conclusions Parent engagement and satisfaction with ImPACT Online was high for both self-directed and therapist-assisted versions of the program, although therapist assistance increased engagement. Program completion was associated with parent outcomes, providing support for the role of the website in parent learning. This program has the potential to increase access to parent-mediated intervention for families of children with ASD. PMID:26443557

Incidence Trend and Epidemiology of Common Cancers in the Center of Iran.

PubMed

Rafiemanesh, Hosein; Rajaei-Behbahani, Narjes; Khani, Yousef; Hosseini, Sayedehafagh; Pournamdar, Zahra; Mohammadian-Hafshejani, Abdollah; Soltani, Shahin; Hosseini, Seyedeh Akram; Khazaei, Salman; Salehiniya, Hamid

2015-07-13

Cancer is a major public health problem in Iran and many other parts of the world. The cancer incidence is different in various countries and in country provinces. Geographical differences in the cancer incidence lead to be important to conduct an epidemiological study of the disease. This study aimed to investigate cancer epidemiology and trend in the province of Qom, located in center of Iran. This is an analytical cross-sectional study carried out based on re-analysis cancer registry report and the disease management center of health ministry from 2004 to 2008 in the province of Qom. To describe incidence time trends, we carried out join point regression analysis using the software Join point Regression Program, Version 4.1.1.1. There were 3,029 registered cases of cancer during 5 years studied. Sex ratio was 1.32 (male to female). Considering the frequency and mean standardized incidence, the most common cancer in women were breast, skin, colorectal, stomach, and esophagus, respectively while in men the most common cancers included skin, stomach, colorectal, bladder, and prostate, respectively. There was an increasing and significant trend, according to the annual percentage change (APC) equal to 8.08% (CI: 5.1-11.1) for all site cancer in women. The incidence trend of all cancers was increasing in this area. Hence, planning for identifying risk factors and performing programs for dealing with the disease are essential.

USSAERO version D computer program development using ANSI standard FORTRAN 77 and DI-3000 graphics

NASA Technical Reports Server (NTRS)

Wiese, M. R.

1986-01-01

The D version of the Unified Subsonic Supersonic Aerodynamic Analysis (USSAERO) program is the result of numerous modifications and enhancements to the B01 version. These changes include conversion to ANSI standard FORTRAN 77; use of the DI-3000 graphics package; removal of the overlay structure; a revised input format; the addition of an input data analysis routine; and increasing the number of aeronautical components allowed.

JEFI: a cash flow analysis program (Version 3.0 for Windows). [Computer program].

Treesearch

Bruce Hansen; Jeff Palmer

1998-01-01

JEFFI/3 is a Windows-version of JEFFI/2. The differences between the two versions are the new interface, an investment term of 1 to 30 years (instead of 4 to 30), and a rich set of detailed online help documents. JEFFI/3 still retains a number of unique features of JEFFII2 related to treatment of the final year cash flows, depreciation, working capital, and derivation...

FLY MPI-2: a parallel tree code for LSS

NASA Astrophysics Data System (ADS)

Becciani, U.; Comparato, M.; Antonuccio-Delogu, V.

2006-04-01

New version program summaryProgram title: FLY 3.1 Catalogue identifier: ADSC_v2_0 Licensing provisions: yes Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADSC_v2_0 Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland No. of lines in distributed program, including test data, etc.: 158 172 No. of bytes in distributed program, including test data, etc.: 4 719 953 Distribution format: tar.gz Programming language: Fortran 90, C Computer: Beowulf cluster, PC, MPP systems Operating system: Linux, Aix RAM: 100M words Catalogue identifier of previous version: ADSC_v1_0 Journal reference of previous version: Comput. Phys. Comm. 155 (2003) 159 Does the new version supersede the previous version?: yes Nature of problem: FLY is a parallel collisionless N-body code for the calculation of the gravitational force Solution method: FLY is based on the hierarchical oct-tree domain decomposition introduced by Barnes and Hut (1986) Reasons for the new version: The new version of FLY is implemented by using the MPI-2 standard: the distributed version 3.1 was developed by using the MPICH2 library on a PC Linux cluster. Today the FLY performance allows us to consider the FLY code among the most powerful parallel codes for tree N-body simulations. Another important new feature regards the availability of an interface with hydrodynamical Paramesh based codes. Simulations must follow a box large enough to accurately represent the power spectrum of fluctuations on very large scales so that we may hope to compare them meaningfully with real data. The number of particles then sets the mass resolution of the simulation, which we would like to make as fine as possible. The idea to build an interface between two codes, that have different and complementary cosmological tasks, allows us to execute complex cosmological simulations with FLY, specialized for DM evolution, and a code specialized for hydrodynamical components that uses a Paramesh block structure. Summary of revisions: The parallel communication schema was totally changed. The new version adopts the MPICH2 library. Now FLY can be executed on all Unix systems having an MPI-2 standard library. The main data structure, is declared in a module procedure of FLY (fly_h.F90 routine). FLY creates the MPI Window object for one-sided communication for all the shared arrays, with a call like the following: CALL MPI_WIN_CREATE(POS, SIZE, REAL8, MPI_INFO_NULL, MPI_COMM_WORLD, WIN_POS, IERR) the following main window objects are created: win_pos, win_vel, win_acc: particles positions velocities and accelerations, win_pos_cell, win_mass_cell, win_quad, win_subp, win_grouping: cells positions, masses, quadrupole momenta, tree structure and grouping cells. Other windows are created for dynamic load balance and global counters. Restrictions: The program uses the leapfrog integrator schema, but could be changed by the user. Unusual features: FLY uses the MPI-2 standard: the MPICH2 library on Linux systems was adopted. To run this version of FLY the working directory must be shared among all the processors that execute FLY. Additional comments: Full documentation for the program is included in the distribution in the form of a README file, a User Guide and a Reference manuscript. Running time: IBM Linux Cluster 1350, 512 nodes with 2 processors for each node and 2 GB RAM for each processor, at Cineca, was adopted to make performance tests. Processor type: Intel Xeon Pentium IV 3.0 GHz and 512 KB cache (128 nodes have Nocona processors). Internal Network: Myricom LAN Card "C" Version and "D" Version. Operating System: Linux SuSE SLES 8. The code was compiled using the mpif90 compiler version 8.1 and with basic optimization options in order to have performances that could be useful compared with other generic clusters Processors

The mathematical statement for the solving of the problem of N-version software system design

NASA Astrophysics Data System (ADS)

Kovalev, I. V.; Kovalev, D. I.; Zelenkov, P. V.; Voroshilova, A. A.

2015-10-01

The N-version programming, as a methodology of the fault-tolerant software systems design, allows successful solving of the mentioned tasks. The use of N-version programming approach turns out to be effective, since the system is constructed out of several parallel executed versions of some software module. Those versions are written to meet the same specification but by different programmers. The problem of developing an optimal structure of N-version software system presents a kind of very complex optimization problem. This causes the use of deterministic optimization methods inappropriate for solving the stated problem. In this view, exploiting heuristic strategies looks more rational. In the field of pseudo-Boolean optimization theory, the so called method of varied probabilities (MVP) has been developed to solve problems with a large dimensionality.

A covariance correction that accounts for correlation estimation to improve finite-sample inference with generalized estimating equations: A study on its applicability with structured correlation matrices

PubMed Central

Westgate, Philip M.

2016-01-01

When generalized estimating equations (GEE) incorporate an unstructured working correlation matrix, the variances of regression parameter estimates can inflate due to the estimation of the correlation parameters. In previous work, an approximation for this inflation that results in a corrected version of the sandwich formula for the covariance matrix of regression parameter estimates was derived. Use of this correction for correlation structure selection also reduces the over-selection of the unstructured working correlation matrix. In this manuscript, we conduct a simulation study to demonstrate that an increase in variances of regression parameter estimates can occur when GEE incorporates structured working correlation matrices as well. Correspondingly, we show the ability of the corrected version of the sandwich formula to improve the validity of inference and correlation structure selection. We also study the relative influences of two popular corrections to a different source of bias in the empirical sandwich covariance estimator. PMID:27818539

A covariance correction that accounts for correlation estimation to improve finite-sample inference with generalized estimating equations: A study on its applicability with structured correlation matrices.

PubMed

Westgate, Philip M

2016-01-01

When generalized estimating equations (GEE) incorporate an unstructured working correlation matrix, the variances of regression parameter estimates can inflate due to the estimation of the correlation parameters. In previous work, an approximation for this inflation that results in a corrected version of the sandwich formula for the covariance matrix of regression parameter estimates was derived. Use of this correction for correlation structure selection also reduces the over-selection of the unstructured working correlation matrix. In this manuscript, we conduct a simulation study to demonstrate that an increase in variances of regression parameter estimates can occur when GEE incorporates structured working correlation matrices as well. Correspondingly, we show the ability of the corrected version of the sandwich formula to improve the validity of inference and correlation structure selection. We also study the relative influences of two popular corrections to a different source of bias in the empirical sandwich covariance estimator.

COSMIC monthly progress report

NASA Technical Reports Server (NTRS)

1994-01-01

Activities of the Computer Software Management and Information Center (COSMIC) are summarized for the month of May 1994. Tables showing the current inventory of programs available from COSMIC are presented and program processing and evaluation activities are summarized. Nine articles were prepared for publication in the NASA Tech Brief Journal. These articles (included in this report) describe the following software items: (1) WFI - Windowing System for Test and Simulation; (2) HZETRN - A Free Space Radiation Transport and Shielding Program; (3) COMGEN-BEM - Composite Model Generation-Boundary Element Method; (4) IDDS - Interactive Data Display System; (5) CET93/PC - Chemical Equilibrium with Transport Properties, 1993; (6) SDVIC - Sub-pixel Digital Video Image Correlation; (7) TRASYS - Thermal Radiation Analyzer System (HP9000 Series 700/800 Version without NASADIG); (8) NASADIG - NASA Device Independent Graphics Library, Version 6.0 (VAX VMS Version); and (9) NASADIG - NASA Device Independent Graphics Library, Version 6.0 (UNIX Version). Activities in the areas of marketing, customer service, benefits identification, maintenance and support, and dissemination are also described along with a budget summary.

Nuclear Engine System Simulation (NESS). Version 2.0: Program user's guide

NASA Technical Reports Server (NTRS)

Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman

1993-01-01

This Program User's Guide discusses the Nuclear Thermal Propulsion (NTP) engine system design features and capabilities modeled in the Nuclear Engine System Simulation (NESS): Version 2.0 program (referred to as NESS throughout the remainder of this document), as well as its operation. NESS was upgraded to include many new modeling capabilities not available in the original version delivered to NASA LeRC in Dec. 1991, NESS's new features include the following: (1) an improved input format; (2) an advanced solid-core NERVA-type reactor system model (ENABLER 2); (3) a bleed-cycle engine system option; (4) an axial-turbopump design option; (5) an automated pump-out turbopump assembly sizing option; (6) an off-design gas generator engine cycle design option; (7) updated hydrogen properties; (8) an improved output format; and (9) personal computer operation capability. Sample design cases are presented in the user's guide that demonstrate many of the new features associated with this upgraded version of NESS, as well as design modeling features associated with the original version of NESS.

Evaluating Youth Development Programs: Progress and Promise

PubMed Central

Brooks-Gunn, Jeanne

2016-01-01

Advances in theories of adolescent development and positive youth development have greatly increased our understanding of how programs and practices with adolescents can impede or enhance their development. In this paper the authors reflect on the progress in research on youth development programs in the last two decades, since possibly the first review of empirical evaluations by Roth, Brooks-Gunn, Murray, and Foster (1998). The authors use the terms Version 1.0, 2.0 and 3.0 to refer to changes in youth development research and programs over time. They argue that advances in theory and descriptive accounts of youth development programs (Version 2.0) need to be coupled with progress in definitions of youth development programs, measurement of inputs and outputs that incorporate an understanding of programs as contexts for development, and stronger design and evaluation of programs (Version 3.0). The authors also advocate for an integration of prevention and promotion research, and for use of the term youth development rather than positive youth development. PMID:28077922

FORM version 4.0

NASA Astrophysics Data System (ADS)

Kuipers, J.; Ueda, T.; Vermaseren, J. A. M.; Vollinga, J.

2013-05-01

We present version 4.0 of the symbolic manipulation system FORM. The most important new features are manipulation of rational polynomials and the factorization of expressions. Many other new functions and commands are also added; some of them are very general, while others are designed for building specific high level packages, such as one for Gröbner bases. New is also the checkpoint facility, that allows for periodic backups during long calculations. Finally, FORM 4.0 has become available as open source under the GNU General Public License version 3. Program summaryProgram title: FORM. Catalogue identifier: AEOT_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEOT_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 151599 No. of bytes in distributed program, including test data, etc.: 1 078 748 Distribution format: tar.gz Programming language: The FORM language. FORM itself is programmed in a mixture of C and C++. Computer: All. Operating system: UNIX, LINUX, Mac OS, Windows. Classification: 5. Nature of problem: FORM defines a symbolic manipulation language in which the emphasis lies on fast processing of very large formulas. It has been used successfully for many calculations in Quantum Field Theory and mathematics. In speed and size of formulas that can be handled it outperforms other systems typically by an order of magnitude. Special in this version: The version 4.0 contains many new features. Most important are factorization and rational arithmetic. The program has also become open source under the GPL. The code in CPC is for reference. You are encouraged to upload the most recent sources from www.nikhef.nl/form/formcvs.php because of frequent bug fixes. Solution method: See "Nature of Problem", above. Additional comments: NOTE: The code in CPC is for reference. You are encouraged to upload the most recent sources from www.nikhef.nl/form/formcvs.php because of frequent bug fixes.

High- and Low-Level Dissonance-Based Eating Disorder Prevention Programs with Young Women with Body Image Concerns: An Experimental Trial

ERIC Educational Resources Information Center

McMillan, Whitney; Stice, Eric; Rohde, Paul

2011-01-01

Objective: As cognitive dissonance is theorized to contribute to the effects of dissonance-based eating disorder prevention programs, we evaluated a high-dissonance version of this program against a low-dissonance version and a wait-list control condition to provide an experimental test of the mechanism of intervention effects. Method: Female…

Mass Spectral Library with Search Program, Data Version: NIST v17

National Institute of Standards and Technology Data Gateway

SRD 1A NIST/EPA/NIH Mass Spectral Library with Search Program, Data Version: NIST v17 (PC database for purchase)   Available with full-featured NIST MS Search Program for Windows integrated tools, the NIST '98 is a fully evaluated collection of electron-ionization mass spectra. (147,198 Compounds with Spectra; 147,194 Chemical Structures; 174,948 Spectra )

PyPele Rewritten To Use MPI

NASA Technical Reports Server (NTRS)

Hockney, George; Lee, Seungwon

2008-01-01

A computer program known as PyPele, originally written as a Pythonlanguage extension module of a C++ language program, has been rewritten in pure Python language. The original version of PyPele dispatches and coordinates parallel-processing tasks on cluster computers and provides a conceptual framework for spacecraft-mission- design and -analysis software tools to run in an embarrassingly parallel mode. The original version of PyPele uses SSH (Secure Shell a set of standards and an associated network protocol for establishing a secure channel between a local and a remote computer) to coordinate parallel processing. Instead of SSH, the present Python version of PyPele uses Message Passing Interface (MPI) [an unofficial de-facto standard language-independent application programming interface for message- passing on a parallel computer] while keeping the same user interface. The use of MPI instead of SSH and the preservation of the original PyPele user interface make it possible for parallel application programs written previously for the original version of PyPele to run on MPI-based cluster computers. As a result, engineers using the previously written application programs can take advantage of embarrassing parallelism without need to rewrite those programs.

mm_par2.0: An object-oriented molecular dynamics simulation program parallelized using a hierarchical scheme with MPI and OPENMP

NASA Astrophysics Data System (ADS)

Oh, Kwang Jin; Kang, Ji Hoon; Myung, Hun Joo

2012-02-01

We have revised a general purpose parallel molecular dynamics simulation program mm_par using the object-oriented programming. We parallelized the revised version using a hierarchical scheme in order to utilize more processors for a given system size. The benchmark result will be presented here. New version program summaryProgram title: mm_par2.0 Catalogue identifier: ADXP_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADXP_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC license, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 2 390 858 No. of bytes in distributed program, including test data, etc.: 25 068 310 Distribution format: tar.gz Programming language: C++ Computer: Any system operated by Linux or Unix Operating system: Linux Classification: 7.7 External routines: We provide wrappers for FFTW [1], Intel MKL library [2] FFT routine, and Numerical recipes [3] FFT, random number generator, and eigenvalue solver routines, SPRNG [4] random number generator, Mersenne Twister [5] random number generator, space filling curve routine. Catalogue identifier of previous version: ADXP_v1_0 Journal reference of previous version: Comput. Phys. Comm. 174 (2006) 560 Does the new version supersede the previous version?: Yes Nature of problem: Structural, thermodynamic, and dynamical properties of fluids and solids from microscopic scales to mesoscopic scales. Solution method: Molecular dynamics simulation in NVE, NVT, and NPT ensemble, Langevin dynamics simulation, dissipative particle dynamics simulation. Reasons for new version: First, object-oriented programming has been used, which is known to be open for extension and closed for modification. It is also known to be better for maintenance. Second, version 1.0 was based on atom decomposition and domain decomposition scheme [6] for parallelization. However, atom decomposition is not popular due to its poor scalability. On the other hand, domain decomposition scheme is better for scalability. It still has a limitation in utilizing a large number of cores on recent petascale computers due to the requirement that the domain size is larger than the potential cutoff distance. To go beyond such a limitation, a hierarchical parallelization scheme has been adopted in this new version and implemented using MPI [7] and OPENMP [8]. Summary of revisions: (1) Object-oriented programming has been used. (2) A hierarchical parallelization scheme has been adopted. (3) SPME routine has been fully parallelized with parallel 3D FFT using volumetric decomposition scheme [9]. K.J.O. thanks Mr. Seung Min Lee for useful discussion on programming and debugging. Running time: Running time depends on system size and methods used. For test system containing a protein (PDB id: 5DHFR) with CHARMM22 force field [10] and 7023 TIP3P [11] waters in simulation box having dimension 62.23 Å×62.23 Å×62.23 Å, the benchmark results are given in Fig. 1. Here the potential cutoff distance was set to 12 Å and the switching function was applied from 10 Å for the force calculation in real space. For the SPME [12] calculation, K, K, and K were set to 64 and the interpolation order was set to 4. To do the fast Fourier transform, we used Intel MKL library. All bonds including hydrogen atoms were constrained using SHAKE/RATTLE algorithms [13,14]. The code was compiled using Intel compiler version 11.1 and mvapich2 version 1.5. Fig. 2 shows performance gains from using CUDA-enabled version [15] of mm_par for 5DHFR simulation in water on Intel Core2Quad 2.83 GHz and GeForce GTX 580. Even though mm_par2.0 is not ported yet for GPU, its performance data would be useful to expect mm_par2.0 performance on GPU. Timing results for 1000 MD steps. 1, 2, 4, and 8 in the figure mean the number of OPENMP threads. Timing results for 1000 MD steps from double precision simulation on CPU, single precision simulation on GPU, and double precision simulation on GPU.

Economic-Analysis Program for a Communication System

NASA Technical Reports Server (NTRS)

Chamberlain, R. G.

1986-01-01

Prices and profits of alternative designs compared. Objective of Land Mobile Satellite Service Finance Report (LMSS) program is to provide means for comparing alternative designs of LMSS systems. Program is Multiplan worksheet program. Labels used in worksheet chosen for satellite-based cellular communication service, but analysis not restricted to such cases. LMSS written for interactive execution with Multiplan (version 1.2) and implemented on IBM PC series computer operating under DOS (version 2.11).

Application of Artificial Intelligence (AI) programming techniques to tactical guidance for fighter aircraft

NASA Technical Reports Server (NTRS)

Mcmanus, John W.; Goodrich, Kenneth H.

1989-01-01

A research program investigating the use of Artificial Intelligence (AI) programming techniques to aid in the development of a Tactical Decision Generator (TDG) for Within-Visual-Range (WVR) air combat engagements is discussed. The application of AI methods for development and implementation of the TDG is presented. The history of the Adaptive Maneuvering Logic (AML) program is traced and current versions of the (AML) program is traced and current versions of the AML program are compared and contrasted with the TDG system. The Knowledge-Based Systems (KBS) used by the TDG to aid in the decision-making process are outlined and example rules are presented. The results of tests to evaluate the performance of the TDG against a version of AML and against human pilots in the Langley Differential Maneuvering Simulator (DMS) are presented. To date, these results have shown significant performance gains in one-versus-one air combat engagements.

New version: GRASP2K relativistic atomic structure package

NASA Astrophysics Data System (ADS)

Jönsson, P.; Gaigalas, G.; Bieroń, J.; Fischer, C. Froese; Grant, I. P.

2013-09-01

A revised version of GRASP2K [P. Jönsson, X. He, C. Froese Fischer, I.P. Grant, Comput. Phys. Commun. 177 (2007) 597] is presented. It supports earlier non-block and block versions of codes as well as a new block version in which the njgraf library module [A. Bar-Shalom, M. Klapisch, Comput. Phys. Commun. 50 (1988) 375] has been replaced by the librang angular package developed by Gaigalas based on the theory of [G. Gaigalas, Z.B. Rudzikas, C. Froese Fischer, J. Phys. B: At. Mol. Phys. 30 (1997) 3747, G. Gaigalas, S. Fritzsche, I.P. Grant, Comput. Phys. Commun. 139 (2001) 263]. Tests have shown that errors encountered by njgraf do not occur with the new angular package. The three versions are denoted v1, v2, and v3, respectively. In addition, in v3, the coefficients of fractional parentage have been extended to j=9/2, making calculations feasible for the lanthanides and actinides. Changes in v2 include minor improvements. For example, the new version of rci2 may be used to compute quantum electrodynamic (QED) corrections only from selected orbitals. In v3, a new program, jj2lsj, reports the percentage composition of the wave function in LSJ and the program rlevels has been modified to report the configuration state function (CSF) with the largest coefficient of an LSJ expansion. The bioscl2 and bioscl3 application programs have been modified to produce a file of transition data with one record for each transition in the same format as in ATSP2K [C. Froese Fischer, G. Tachiev, G. Gaigalas, M.R. Godefroid, Comput. Phys. Commun. 176 (2007) 559], which identifies each atomic state by the total energy and a label for the CSF with the largest expansion coefficient in LSJ intermediate coupling. All versions of the codes have been adapted for 64-bit computer architecture. Program SummaryProgram title: GRASP2K, version 1_1 Catalogue identifier: ADZL_v1_1 Program summary URL: http://cpc.cs.qub.ac.uk/summaries/ADZL_v1_1.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 730252 No. of bytes in distributed program, including test data, etc.: 14808872 Distribution format: tar.gz Programming language: Fortran. Computer: Intel Xeon, 2.66 GHz. Operating system: Suse, Ubuntu, and Debian Linux 64-bit. RAM: 500 MB or more Classification: 2.1. Catalogue identifier of previous version: ADZL_v1_0 Journal reference of previous version: Comput. Phys. Comm. 177 (2007) 597 Does the new version supersede the previous version?: Yes Nature of problem: Prediction of atomic properties — atomic energy levels, oscillator strengths, radiative decay rates, hyperfine structure parameters, Landé gJ-factors, and specific mass shift parameters — using a multiconfiguration Dirac-Hartree-Fock approach. Solution method: The computational method is the same as in the previous GRASP2K [1] version except that for v3 codes the njgraf library module [2] for recoupling has been replaced by librang [3,4]. Reasons for new version: New angular libraries with improved performance are available. Also methodology for transforming from jj- to LSJ-coupling has been developed. Summary of revisions: New angular libraries where the coefficients of fractional parentage have been extended to j=9/2, making calculations feasible for the lanthanides and actinides. Inclusion of a new program jj2lsj, which reports the percentage composition of the wave function in LSJ. Transition programs have been modified to produce a file of transition data with one record for each transition in the same format as Atsp2K [C. Froese Fischer, G. Tachiev, G. Gaigalas and M.R. Godefroid, Comput. Phys. Commun. 176 (2007) 559], which identifies each atomic state by the total energy and a label for the CSF with the largest expansion coefficient in LSJ intermediate coupling. Updated to 64-bit architecture. A comprehensive user manual in pdf format for the program package has been added. Restrictions: The packing algorithm restricts the maximum number of orbitals to be ≤214. The tables of reduced coefficients of fractional parentage used in this version are limited to subshells with j≤9/2 [5]; occupied subshells with j>9/2 are, therefore, restricted to a maximum of two electrons. Some other parameters, such as the maximum number of subshells of a CSF outside a common set of closed shells are determined by a parameter.def file that can be modified prior to compile time. Unusual features: The bioscl3 program reports transition data in the same format as in Atsp2K [6], and the data processing program tables of the latter package can be used. The tables program takes a name.lsj file, usually a concatenated file of all the .lsj transition files for a given atom or ion, and finds the energy structure of the levels and the multiplet transition arrays. The tables posted at the website http://atoms.vuse.vanderbilt.edu are examples of tables produced by the tables program. With the extension of coefficients of fractional parentage to j=9/2, calculations for the lanthanides and actinides become possible. Running time: CPU time required to execute test cases: 70.5 s.

GEMPAK 5.1 - A GENERAL METEOROLOGICAL PACKAGE (UNIX VERSION)

NASA Technical Reports Server (NTRS)

Desjardins, M. L.

1994-01-01

GEMPAK is a general meteorological software package developed at NASA/Goddard Space Flight Center. It includes programs to analyze and display surface, upper-air, and gridded data, including model output. There are very general programs to list, edit, and plot data on maps, to display profiles and time series, to draw and fill contours, to draw streamlines, to plot symbols for clouds, sky cover, and pressure tendency, and draw cross sections in the case of gridded data and sounding data. In addition, there are Barnes objective analysis programs to grid surface and upper-air data. The programs include the capabilities to derive meteorological parameters from those found in the dataset, to perform vertical interpolations of sounding data to different coordinate systems, and to compute an extensive set of gridded diagnostic quantities by specifying various nested combinations of scalars and vector arithmetic, algebraic, and differential operators. The GEMPAK 5.1 graphics/transformation subsystem, GEMPLT, provides device-independent graphics. GEMPLT also has the capability to display output in a variety of map projections or overlaid on satellite imagery. GEMPAK 5.1 is written in FORTRAN 77 and C-language and has been implemented on VAX computers under VMS and on computers running the UNIX operating system. During installation and normal use, this package occupies approximately 100Mb of hard disk space. The UNIX version of GEMPAK includes drivers for several graphic output systems including MIT's X Window System (X11,R4), Sun GKS, PostScript (color and monochrome), Silicon Graphics, and others. The VMS version of GEMPAK also includes drivers for several graphic output systems including PostScript (color and monochrome). The VMS version is delivered with the object code for the Transportable Applications Environment (TAE) program, version 4.1 which serves as a user interface. A color monitor is recommended for displaying maps on video display devices. Data for rendering regional maps is included with this package. The standard distribution medium for the UNIX version of GEMPAK 5.1 is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the VMS version of GEMPAK 5.1 is a 6250 BPI 9-track magnetic tape in DEC VAX BACKUP format. The VMS version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. This program was developed in 1985. The current version, GEMPAK 5.1, was released in 1992. The package is delivered with source code. An extensive collection of subroutine libraries allows users to format data for use by GEMPAK, to develop new programs, and to enhance existing ones.

Long wavelength propagation capacity, version 1.1 (computer diskette)

NASA Astrophysics Data System (ADS)

1994-05-01

File Characteristics: software and data file. (72 files); ASCII character set. Physical Description: 2 computer diskettes; 3 1/2 in.; high density; 1.44 MB. System Requirements: PC compatible; Digital Equipment Corp. VMS; PKZIP (included on diskette). This report describes a revision of the Naval Command, Control and Ocean Surveillance Center RDT&E Division's Long Wavelength Propagation Capability (LWPC). The first version of this capability was a collection of separate FORTRAN programs linked together in operation by a command procedure written in an operating system unique to the Digital Equipment Corporation (Ferguson & Snyder, 1989a, b). A FORTRAN computer program named Long Wavelength Propagation Model (LWPM) was developed to replace the VMS control system (Ferguson & Snyder, 1990; Ferguson, 1990). This was designated version 1 (LWPC-1). This program implemented all the features of the original VMS plus a number of auxiliary programs that provided summaries of the files and graphical displays of the output files. This report describes a revision of the LWPC, designated version 1.1 (LWPC-1.1)

Nonstrategic Nuclear Weapons

DTIC Science & Technology

2012-12-19

full scope” life extension program for the B61 bomb, the weapon that is currently deployed in Europe, “to ensure its functionality with the F-35...This life extension program will consolidate four versions of the B61 bomb, including the B61 -3 and B61 - 4 that are currently deployed in Europe, into...one version, the B61 -12. Reports indicate that this new version will reuse the nuclear components of the older bombs, but will include enhanced

Nonstrategic Nuclear Weapons

DTIC Science & Technology

2014-01-03

NPR also indicated that the United States would conduct a “full scope” life extension program for the B61 bomb, the weapon that is currently deployed...in Europe, “to ensure its functionality with the F-35.” This life extension program will consolidate four versions of the B61 bomb, including the B61 ...3 and B61 - 4 that are currently deployed in Europe, into one version, the B61 -12. Reports indicate that this new version will reuse the nuclear

Spacecraft Orbit Design and Analysis (SODA), version 1.0 user's guide

NASA Technical Reports Server (NTRS)

Stallcup, Scott S.; Davis, John S.

1989-01-01

The Spacecraft Orbit Design and Analysis (SODA) computer program, Version 1.0 is described. SODA is a spaceflight mission planning system which consists of five program modules integrated around a common database and user interface. SODA runs on a VAX/VMS computer with an EVANS & SUTHERLAND PS300 graphics workstation. BOEING RIM-Version 7 relational database management system performs transparent database services. In the current version three program modules produce an interactive three dimensional (3D) animation of one or more satellites in planetary orbit. Satellite visibility and sensor coverage capabilities are also provided. One module produces an interactive 3D animation of the solar system. Another module calculates cumulative satellite sensor coverage and revisit time for one or more satellites. Currently Earth, Moon, and Mars systems are supported for all modules except the solar system module.

Major Depression Prevalence Increases with Latitude in Canada

PubMed Central

Williams, Jeanne V. A.; Lavorato, Dina H.; Wang, Jian Li; Bulloch, Andrew G. M.

2016-01-01

Objective: To determine whether there is an association between latitude and annual major depressive episode (MDE) prevalence in Canada. Methods: Data from 2 national survey programs (the National Population Health Survey and the Canadian Community Health Survey) were used, providing 10 data sets collected between 1996 and 2013, together including 922,260 respondents, of whom 495,739 were assessed for MDE using 1 of 2 versions of the Composite International Diagnostic Interview, a short-form version (8 studies), and a Canadian adaptation of the World Mental Health version (2 studies). Approximate latitude was determined by linkage to postal code data. Data were analyzed using logistic regression and pooled across surveys using individual-level meta-analytic methods. Results: In models including latitude as a continuous variable, a statistically significant association was observed, with prevalence increasing with increasing latitude. This association persisted after adjustment for a set of known risk factors. The latitude gradient was modest in magnitude, a 1% to 2% increase in the prevalence odds of MDE per degree of latitude was observed. Due to sparse data, this gradient cannot be confidently generalized beyond major population centres, which tend to occur at less than 55° latitude in Canada. Conclusion: A latitude gradient has not previously been reported. If replicated, the gradient may have implications for the planning of services and generation of aetiological hypotheses. However, this cross-sectional analysis cannot confirm aetiology and could not evaluate the potential contributions of variables such as light exposure, weather patterns, or social determinants. PMID:27729573

Timing of delivery after external cephalic version and the risk for cesarean delivery.

PubMed

Kabiri, Doron; Elram, Tamar; Aboo-Dia, Mushira; Elami-Suzin, Matan; Elchalal, Uriel; Ezra, Yossef

2011-08-01

To estimate the association between time of delivery after external cephalic version at term and the risk for cesarean delivery. This retrospective cohort study included all successful external cephalic versions performed in a tertiary center between January 1997 and January 2010. Stepwise logistic regression was used to calculate the odds ratio (OR) for cesarean delivery. We included 483 external cephalic versions in this study, representing 53.1% of all external cephalic version attempts. The incidence of cesarean delivery for 139 women (29%) who gave birth less than 96 hours from external cephalic version was 16.5%; for 344 women (71%) who gave birth greater than 96 hours from external cephalic version, the incidence of cesarean delivery was 7.8% (P = .004). The adjusted OR for cesarean delivery was 2.541 (95% confidence interval 1.36-4.72). When stratified by parity, the risk for cesarean delivery when delivery occurred less than 96 hours after external cephalic version was 2.97 and 2.28 for nulliparous and multiparous women, respectively. Delivery at less than 96 hours after successful external cephalic version was associated with an increased risk for cesarean delivery. III.

Extensive middle atmosphere (20-120 KM) modification in the Global Reference Atmospheric Model (GRAM-90)

NASA Technical Reports Server (NTRS)

Justus, C. G.; Johnson, Dale

1990-01-01

The Global Reference Atmospheric Model (GRAM) is currently available in the 'GRAM-88' version (Justus, et al., 1986; 1988), which includes relatively minor upgrades and changes from the 'MOD-3' version (Justus, et al., 1980). Currently a project is underway to use large amounts of data, mostly collected under the Middle Atmosphere Program (MAP) to produce a major upgrade of the program planned for release as the GRAM-90 version. The new data and program revisions will particularly affect the 25-90 km height range. Sources of data and preliminary results are described here in the form of cross-sectional plots.

SITE CHARACTERIZATION LIBRARY VERSION 3.0

EPA Science Inventory

The Site Characterization Library is a CD that provides a centralized, field-portable source for site characterization information. Version 3 of the Site Characterization Library contains additional (from earlier versions) electronic documents and computer programs related to th...

Updated System-Availability and Resource-Allocation Program

NASA Technical Reports Server (NTRS)

Viterna, Larry

2004-01-01

A second version of the Availability, Cost and Resource Allocation (ACARA) computer program has become available. The first version was reported in an earlier tech brief. To recapitulate: ACARA analyzes the availability, mean-time-between-failures of components, life-cycle costs, and scheduling of resources of a complex system of equipment. ACARA uses a statistical Monte Carlo method to simulate the failure and repair of components while complying with user-specified constraints on spare parts and resources. ACARA evaluates the performance of the system on the basis of a mathematical model developed from a block-diagram representation. The previous version utilized the MS-DOS operating system and could not be run by use of the most recent versions of the Windows operating system. The current version incorporates the algorithms of the previous version but is compatible with Windows and utilizes menus and a file-management approach typical of Windows-based software.

Application of majority voting and consensus voting algorithms in N-version software

NASA Astrophysics Data System (ADS)

Tsarev, R. Yu; Durmuş, M. S.; Üstoglu, I.; Morozov, V. A.

2018-05-01

N-version programming is one of the most common techniques which is used to improve the reliability of software by building in fault tolerance, redundancy and decreasing common cause failures. N different equivalent software versions are developed by N different and isolated workgroups by considering the same software specifications. The versions solve the same task and return results that have to be compared to determine the correct result. Decisions of N different versions are evaluated by a voting algorithm or the so-called voter. In this paper, two of the most commonly used software voting algorithms such as the majority voting algorithm and the consensus voting algorithm are studied. The distinctive features of Nversion programming with majority voting and N-version programming with consensus voting are described. These two algorithms make a decision about the correct result on the base of the agreement matrix. However, if the equivalence relation on the agreement matrix is not satisfied it is impossible to make a decision. It is shown that the agreement matrix can be transformed into an appropriate form by using the Boolean compositions when the equivalence relation is satisfied.

Checkout/demonstration application program for the SEL 840MP Multi-Processing Control System: Version 1 (MPCS/1)

NASA Technical Reports Server (NTRS)

Anderson, W. F.; Conway, J. R.; Keller, L. C.

1972-01-01

The characteristics of the application program were developed to verify and demonstrate the SEL 840MP Multi-Processing Control System - Version I (MPCS/1). The application program emphasizes the display support and task control capabilities. The application program is further intended to be used as an aid to familization with MPCS/1. It complements the information provided in the MPCS/1 Users Guide, Volume I and II.

Computer program documentation modified version of the JA70 aerodynamic heating computer program H800 (MINIVER with a DISSPLA plot package

NASA Technical Reports Server (NTRS)

Olmedo, L.

1980-01-01

The changes, modifications, and inclusions which were adapted to the current version of the MINIVER program are discussed. Extensive modifications were made to various subroutines, and a new plot package added. This plot package is the Johnson Space Center DISSPLA Graphics System currently driven under an 1110 EXEC 8 configuration. User instructions on executing the MINIVER program are provided and the plot package is described.

10 CFR Appendix W to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Medium Base Compact Fluorescent Lamps

Code of Federal Regulations, 2013 CFR

2013-01-01

... “ENERGY STAR Program Requirements for [Compact Fluorescent Lamps] CFLs,” Version dated August 9, 2001... DOE's “ENERGY STAR Program Requirements for [Compact Fluorescent Lamps] CFLs,” Version dated August 9...

The Role of Graphic and Sanitized Violence in the Enjoyment of Television Dramas

ERIC Educational Resources Information Center

Weaver, Andrew J.; Wilson, Barbara J.

2009-01-01

This experiment explores the relationship between television violence and viewer enjoyment. Over 400 participants were randomly assigned to one of 15 conditions that were created by editing five TV programs into three versions each: A graphically violent version, a sanitized violent version, and a nonviolent version. After viewing, participants…

Effectiveness of Two Versions of a STD/HIV Prevention Program

DTIC Science & Technology

2002-01-01

NAVAL HEALTH RESEARCH CENTER EFFECTIVENESS OF TWO VERSIONS OF A STD/HIV PREVENTION PROGRAM S . Booth-Kewley R. A. Shaffer...R. Y. Minagawa S . K. Brodine Report No. 01-01 Approved for public release; distribution unlimited...of a behavioral intervention called the STD/HIV Intervention Program (SHIP) in a sample of Marines. Marines were exposed to either a 6 hr or a 3 hr

QDENSITY—A Mathematica quantum computer simulation

NASA Astrophysics Data System (ADS)

Juliá-Díaz, Bruno; Burdis, Joseph M.; Tabakin, Frank

2009-03-01

This Mathematica 6.0 package is a simulation of a Quantum Computer. The program provides a modular, instructive approach for generating the basic elements that make up a quantum circuit. The main emphasis is on using the density matrix, although an approach using state vectors is also implemented in the package. The package commands are defined in Qdensity.m which contains the tools needed in quantum circuits, e.g., multiqubit kets, projectors, gates, etc. New version program summaryProgram title: QDENSITY 2.0 Catalogue identifier: ADXH_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADXH_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 26 055 No. of bytes in distributed program, including test data, etc.: 227 540 Distribution format: tar.gz Programming language: Mathematica 6.0 Operating system: Any which supports Mathematica; tested under Microsoft Windows XP, Macintosh OS X, and Linux FC4 Catalogue identifier of previous version: ADXH_v1_0 Journal reference of previous version: Comput. Phys. Comm. 174 (2006) 914 Classification: 4.15 Does the new version supersede the previous version?: Offers an alternative, more up to date, implementation Nature of problem: Analysis and design of quantum circuits, quantum algorithms and quantum clusters. Solution method: A Mathematica package is provided which contains commands to create and analyze quantum circuits. Several Mathematica notebooks containing relevant examples: Teleportation, Shor's Algorithm and Grover's search are explained in detail. A tutorial, Tutorial.nb is also enclosed. Reasons for new version: The package has been updated to make it fully compatible with Mathematica 6.0 Summary of revisions: The package has been updated to make it fully compatible with Mathematica 6.0 Running time: Most examples included in the package, e.g., the tutorial, Shor's examples, Teleportation examples and Grover's search, run in less than a minute on a Pentium 4 processor (2.6 GHz). The running time for a quantum computation depends crucially on the number of qubits employed.

A study of satisfaction of medical students on their mentoring programs at one medical school in Korea

PubMed Central

2017-01-01

Purpose The purpose of this study was to investigate the awareness levels of medical students regarding the characteristics of each function within a mentoring program conducted within Kyung Hee University and to ultimately suggest points for reformation. Medical students’ awareness levels were determined using a 29-item questionnaire. Methods The questionnaire was conducted on 347 medical students, excluding 25 students who either marked multiple answers or did not reply. The assessment of the program was based on a questionnaire with the use of a 5-point Likert scale using SPSS version 22.0. Multiple regression was conducted to examine the relationship between the satisfaction level, regarding functions of mentoring programs, and characteristics of mentoring programs. Interviews were conducted to supplement additional information that was hard to gain from the questionnaire. Results The results on demographic and functional characteristics revealed that there was no statistically significant differences in satisfaction levels across gender, whereas there were significant differences across grade levels. In addition, there were significant differences in the frequency of meetings and topics of conversation while the length of meetings and meeting place were not significantly different. Conclusion For the improved mentoring programs for medical students, the program should focus on the frequency of meetings and the topics of conversation. Furthermore, mentoring programs of high quality can be expected if professors take interview results into consideration. Also, students want to be provided with psychosocial advice from mentors in various ways such as role model function. PMID:29207456

Personalization of structural PDB files.

PubMed

Woźniak, Tomasz; Adamiak, Ryszard W

2013-01-01

PDB format is most commonly applied by various programs to define three-dimensional structure of biomolecules. However, the programs often use different versions of the format. Thus far, no comprehensive solution for unifying the PDB formats has been developed. Here we present an open-source, Python-based tool called PDBinout for processing and conversion of various versions of PDB file format for biostructural applications. Moreover, PDBinout allows to create one's own PDB versions. PDBinout is freely available under the LGPL licence at http://pdbinout.ibch.poznan.pl.

An upgraded version of the generator BCVEGPY2.0 for hadronic production of B meson and its excited states

NASA Astrophysics Data System (ADS)

Chang, Chao-Hsi; Wang, Jian-Xiong; Wu, Xing-Gang

2006-11-01

An upgraded version of the package BCVEGPY2.0: [C.-H. Chang, J.-X. Wang, X.-G. Wu, Comput. Phys. Commun. 174 (2006) 241] is presented, which works under LINUX system and is named as BCVEGPY2.1. With the version and a GNU C compiler additionally, users may simulate the B-events in various experimental environments very conveniently. It has been manipulated in better modularity and code reusability (less cross communication among various modules) than BCVEGPY2.0 has. Furthermore, in the upgraded version a special execution is arranged as that the GNU command make compiles a requested code with the help of a master makefile in main code directory, and then builds an executable file with the default name run. Finally, this paper may also be considered as an erratum, i.e., typo errors in BCVEGPY2.0 and corrections accordingly have been listed. New version program (BCVEGPY2.1) summaryTitle of program: BCVEGPY2.1 Catalogue identifier: ADTJ_v2_1 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADTJ_v2_1 Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Reference to original program: BCVEGPY2.0 Reference in CPC: Comput. Phys. Commun. 174 (2006) 241 Does the new version supersede the old program: No Computer: Any LINUX based on PC with FORTRAN 77 or FORTRAN 90 and GNU C compiler as well Operating systems: LINUX Programming language used: FORTRAN 77/90 Memory required to execute with typical data: About 2.0 MB No. of lines in distributed program, including test data, etc.: 31 521 No. of bytes in distributed program, including test data, etc.: 1 310 179 Distribution format: tar.gz Nature of physical problem: Hadronic production of B meson itself and its excited states Method of solution: The code with option can generate weighted and unweighted events. An interface to PYTHIA is provided to meet the needs of jets hadronization in the production. Restrictions on the complexity of the problem: The hadronic production of (cb¯)-quarkonium in S-wave and P-wave states via the mechanism of gluon-gluon fusion are given by the so-called 'complete calculation' approach. Reasons for new version: Responding to the feedback from users, we rearrange the program in a convenient way and then it can be easily adopted by the users to do the simulations according to their own experimental environment (e.g. detector acceptances and experimental cuts). We have paid many efforts to rearrange the program into several modules with less cross communication among the modules, the main program is slimmed down and all the further actions are decoupled from the main program and can be easily called for various purposes. Typical running time: The typical running time is machine and user-parameters dependent. Typically, for production of the S-wave (cb¯)-quarkonium, when IDWTUP = 1, it takes about 20 hour on a 1.8 GHz Intel P4-processor machine to generate 1000 events; however, when IDWTUP = 3, to generate 10 6 events it takes about 40 minutes only. Of the production, the time for the P-wave (cb¯)-quarkonium will take almost two times longer than that for its S-wave quarkonium. Summary of the changes (improvements): (1) The structure and organization of the program have been changed a lot. The new version package BCVEGPY2.1 has been divided into several modules with less cross communication among the modules (some old version source files are divided into several parts for the purpose). The main program is slimmed down and all the further actions are decoupled from the main program so that they can be easily called for various applications. All of the Fortran codes are organized in the main code directory named as bcvegpy2.1, which contains the main program, all of its prerequisite files and subsidiary 'folders' (subdirectory to the main code directory). The method for setting the parameter is the same as that of the previous versions [C.-H. Chang, C. Driouich, P. Eerola, X.-G. Wu, Comput. Phys. Commun. 159 (2004) 192, hep-ph/0309120. [1

IMS Version 3 Student Data Base Maintenance Program.

ERIC Educational Resources Information Center

Brown, John R.

Computer routines that update the Instructional Management System (IMS) Version 3 student data base which supports the Southwest Regional Laboratory's (SWRL) student monitoring system are described. Written in IBM System 360 FORTRAN IV, the program updates the data base by adding, changing and deleting records, as well as adding and deleting…

76 FR 57723 - Agency Information Collection Activities: Proposed Collection; Comment Request; Election...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

...; Comment Request; Election Assistance Commission's Voting System Test Laboratory Program Manual, Version 1... Paperwork Reduction Act of 1995, the U.S. Election Assistance Commission (EAC) invites the general public... information collection, EAC's Voting System Test Laboratory Program Manual, Version 1.0. Comments are invited...

The Invar tensor package: Differential invariants of Riemann

NASA Astrophysics Data System (ADS)

Martín-García, J. M.; Yllanes, D.; Portugal, R.

2008-10-01

The long standing problem of the relations among the scalar invariants of the Riemann tensor is computationally solved for all 6ṡ10 objects with up to 12 derivatives of the metric. This covers cases ranging from products of up to 6 undifferentiated Riemann tensors to cases with up to 10 covariant derivatives of a single Riemann. We extend our computer algebra system Invar to produce within seconds a canonical form for any of those objects in terms of a basis. The process is as follows: (1) an invariant is converted in real time into a canonical form with respect to the permutation symmetries of the Riemann tensor; (2) Invar reads a database of more than 6ṡ10 relations and applies those coming from the cyclic symmetry of the Riemann tensor; (3) then applies the relations coming from the Bianchi identity, (4) the relations coming from commutations of covariant derivatives, (5) the dimensionally-dependent identities for dimension 4, and finally (6) simplifies invariants that can be expressed as product of dual invariants. Invar runs on top of the tensor computer algebra systems xTensor (for Mathematica) and Canon (for Maple). Program summaryProgram title:Invar Tensor Package v2.0 Catalogue identifier:ADZK_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADZK_v2_0.html Program obtainable from:CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions:Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.:3 243 249 No. of bytes in distributed program, including test data, etc.:939 Distribution format:tar.gz Programming language:Mathematica and Maple Computer:Any computer running Mathematica versions 5.0 to 6.0 or Maple versions 9 and 11 Operating system:Linux, Unix, Windows XP, MacOS RAM:100 Mb Word size:64 or 32 bits Supplementary material:The new database of relations is much larger than that for the previous version and therefore has not been included in the distribution. To obtain the Mathematica and Maple database files click on this link. Classification:1.5, 5 Does the new version supersede the previous version?:Yes. The previous version (1.0) only handled algebraic invariants. The current version (2.0) has been extended to cover differential invariants as well. Nature of problem:Manipulation and simplification of scalar polynomial expressions formed from the Riemann tensor and its covariant derivatives. Solution method:Algorithms of computational group theory to simplify expressions with tensors that obey permutation symmetries. Tables of syzygies of the scalar invariants of the Riemann tensor. Reasons for new version:With this new version, the user can manipulate differential invariants of the Riemann tensor. Differential invariants are required in many physical problems in classical and quantum gravity. Summary of revisions:The database of syzygies has been expanded by a factor of 30. New commands were added in order to deal with the enlarged database and to manipulate the covariant derivative. Restrictions:The present version only handles scalars, and not expressions with free indices. Additional comments:The distribution file for this program is over 53 Mbytes and therefore is not delivered directly when download or Email is requested. Instead a html file giving details of how the program can be obtained is sent. Running time:One second to fully reduce any monomial of the Riemann tensor up to degree 7 or order 10 in terms of independent invariants. The Mathematica notebook included in the distribution takes approximately 5 minutes to run.

Users' instructions for the NASA/MSFC cloud-rise preprocessor program, version 6, and the NASA/MSFC multilayer diffusion program, version 6: Research version for Univac 1108 system

NASA Technical Reports Server (NTRS)

Bjorklund, J. R.

1978-01-01

The cloud-rise preprocessor and multilayer diffusion computer programs were used by NASA in predicting concentrations and dosages downwind from normal and abnormal launches of rocket vehicles. These programs incorporated: (1) the latest data for the heat content and chemistry of rocket exhaust clouds; (2) provision for the automated calculation of surface water pH due to deposition of HCl from precipitation scavenging; (3) provision for automated calculation of concentration and dosage parameters at any level within the vertical grounds for which meteorological inputs have been specified; and (4) provision for execution of multiple cases of meteorological data. Procedures used to automatically calculate wind direction shear in a layer were updated.

Predictive Accuracy of Violence Risk Scale-Sexual Offender Version Risk and Change Scores in Treated Canadian Aboriginal and Non-Aboriginal Sexual Offenders.

PubMed

Olver, Mark E; Sowden, Justina N; Kingston, Drew A; Nicholaichuk, Terry P; Gordon, Audrey; Beggs Christofferson, Sarah M; Wong, Stephen C P

2018-04-01

The present study examined the predictive properties of Violence Risk Scale-Sexual Offender version (VRS-SO) risk and change scores among Aboriginal and non-Aboriginal sexual offenders in a combined sample of 1,063 Canadian federally incarcerated men. All men participated in sexual offender treatment programming through the Correctional Service of Canada (CSC) at sites across its five regions. The Static-99R was also examined for comparison purposes. In total, 393 of the men were identified as Aboriginal (i.e., First Nations, Métis, Circumpolar) while 670 were non-Aboriginal and primarily White. Aboriginal men scored significantly higher on the Static-99R and VRS-SO and had higher rates of sexual and violent recidivism; however, there were no significant differences between Aboriginal and non-Aboriginal groups on treatment change with both groups demonstrating close to a half-standard deviation of change pre and post treatment. VRS-SO risk and change scores significantly predicted sexual and violent recidivism over fixed 5- and 10-year follow-ups for both racial/ancestral groups. Cox regression survival analyses also demonstrated positive treatment changes to be significantly associated with reductions in sexual and violent recidivism among Aboriginal and non-Aboriginal men after controlling baseline risk. A series of follow-up Cox regression analyses demonstrated that risk and change score information accounted for much of the observed differences between Aboriginal and non-Aboriginal men in rates of sexual recidivism; however, marked group differences persisted in rates of general violent recidivism even after controlling for these covariates. The results support the predictive properties of VRS-SO risk and change scores with treated Canadian Aboriginal sexual offenders.

The effects of the Union for International Cancer Control/American Joint Committee on Cancer Tumour, Node, Metastasis system version 8 on staging of differentiated thyroid cancer: a comparison to version 7.

PubMed

Verburg, Frederik A; Mäder, Uwe; Luster, Markus; Reiners, Christoph

2018-06-01

To assess the changes resulting from the changes from UICC/AJCC TNM version 7 to version 8 and to subsequently determine whether TNM version 8 is an improvement compared to previous iterations of the TNM system and other staging systems for differentiated thyroid cancer (DTC) with regard to prognostic power. Database study of DTC patients treated in our centre between 1978 up to and including 1 July 2014. Results were compared to our previous comparison of prognostic systems using the same data set. 2257 DTC patients. Staging in accordance with TNM 7 and TNM 8. Thyroid cancer-specific mortality; comparison was based on p-values of univariate Cox regression analyses as well as analysis of the proportion of variance explained (PVE). There is a redistribution from stage 3 to lower stages affecting 206 (9.1%) patients. DTC-related mortality according to Kaplan-Meier for younger and older patients in TNM 7 had a slightly lower prognostic power than that in accordance with TNM 8 (P = 8.0 10 -16 and P = 1.5 10 -21 , respectively). Overall staging is lower in 627/2257 (27.8%) patients. PVE (TNM 7: 0.29; TNM 8: 0.28) and the P-value of Cox regressions (TNM 7: P = 7.1*10 -52 ; TNM 8: P = 3.9*10 -49 ) for TNM version 8 are marginally lower than that for TNM version 7, but still better than for any other DTC staging system. TNM 8 results in a marked downstaging of patients compared to TNM 7. Although some changes, like the change in age boundary, appear to be associated with an improvement in prognostic power, the overall effect of the changes does not improve the predictive power compared to TNM 7. © 2018 John Wiley & Sons Ltd.

Views of Teachers, Parents, and Counselors toward the Preschool Version of First Step to Success Early Intervention Program (FSS-PSV) in Preventing Antisocial Behaviors

ERIC Educational Resources Information Center

Çolak, Aysun; Tomris, Gözde; Diken, Ibrahim H.; Arikan, Arzu; Aksoy, Funda; Çelik, Seçil

2015-01-01

This study aims to describe the views of teachers, parents, and FSS-PSV counselors on the Preschool Version of First Step to Success Early Intervention Program (FSS-PSV) in preventing antisocial behaviors; in addition, the implementation process and contributions from the program will also be outlined. The study was conducted in six different…

Optics Program Modified for Multithreaded Parallel Computing

NASA Technical Reports Server (NTRS)

Lou, John; Bedding, Dave; Basinger, Scott

2006-01-01

A powerful high-performance computer program for simulating and analyzing adaptive and controlled optical systems has been developed by modifying the serial version of the Modeling and Analysis for Controlled Optical Systems (MACOS) program to impart capabilities for multithreaded parallel processing on computing systems ranging from supercomputers down to Symmetric Multiprocessing (SMP) personal computers. The modifications included the incorporation of OpenMP, a portable and widely supported application interface software, that can be used to explicitly add multithreaded parallelism to an application program under a shared-memory programming model. OpenMP was applied to parallelize ray-tracing calculations, one of the major computing components in MACOS. Multithreading is also used in the diffraction propagation of light in MACOS based on pthreads [POSIX Thread, (where "POSIX" signifies a portable operating system for UNIX)]. In tests of the parallelized version of MACOS, the speedup in ray-tracing calculations was found to be linear, or proportional to the number of processors, while the speedup in diffraction calculations ranged from 50 to 60 percent, depending on the type and number of processors. The parallelized version of MACOS is portable, and, to the user, its interface is basically the same as that of the original serial version of MACOS.

FINDS: A fault inferring nonlinear detection system programmers manual, version 3.0

NASA Technical Reports Server (NTRS)

Lancraft, R. E.

1985-01-01

Detailed software documentation of the digital computer program FINDS (Fault Inferring Nonlinear Detection System) Version 3.0 is provided. FINDS is a highly modular and extensible computer program designed to monitor and detect sensor failures, while at the same time providing reliable state estimates. In this version of the program the FINDS methodology is used to detect, isolate, and compensate for failures in simulated avionics sensors used by the Advanced Transport Operating Systems (ATOPS) Transport System Research Vehicle (TSRV) in a Microwave Landing System (MLS) environment. It is intended that this report serve as a programmers guide to aid in the maintenance, modification, and revision of the FINDS software.

WATEQF; a FORTRAN IV version of WATEQ : a computer program for calculating chemical equilibrium of natural waters

USGS Publications Warehouse

Plummer, Niel; Jones, Blair F.; Truesdell, Alfred Hemingway

1976-01-01

WATEQF is a FORTRAN IV computer program that models the thermodynamic speciation of inorganic ions and complex species in solution for a given water analysis. The original version (WATEQ) was written in 1973 by A. H. Truesdell and B. F. Jones in Programming Language/one (PL/1.) With but a few exceptions, the thermochemical data, speciation, coefficients, and general calculation procedure of WATEQF is identical to the PL/1 version. This report notes the differences between WATEQF and WATEQ, demonstrates how to set up the input data to execute WATEQF, provides a test case for comparison, and makes available a listing of WATEQF. (Woodard-USGS)

The 1991 version of the plume impingement computer program. Volume 2: User's input guide

NASA Technical Reports Server (NTRS)

Bender, Robert L.; Somers, Richard E.; Prendergast, Maurice J.; Clayton, Joseph P.; Smith, Sheldon D.

1991-01-01

The Plume Impingement Program (PLIMP) is a computer code used to predict impact pressures, forces, moments, heating rates, and contamination on surfaces due to direct impingement flowfields. Typically, it has been used to analyze the effects of rocket exhaust plumes on nearby structures from ground level to the vacuum of space. The program normally uses flowfields generated by the MOC, RAMP2, SPF/2, or SFPGEN computer programs. It is capable of analyzing gaseous and gas/particle flows. A number of simple subshapes are available to model the surfaces of any structure. The original PLIMP program has been modified many times of the last 20 years. The theoretical bases for the referenced major changes, and additional undocumented changes and enhancements since 1988 are summarized in volume 1 of this report. This volume is the User's Input Guide and should be substituted for all previous guides when running the latest version of the program. This version can operate on VAX and UNIX machines with NCAR graphics ability.

Investigation of marital satisfaction and its relationship with job stress and general health of nurses in Qazvin, Iran

PubMed Central

Azimian, Jalil; Piran, Pegah; Jahanihashemi, Hassan; Dehghankar, Leila

2017-01-01

Background Pressures in nursing can affect family life and marital problems, disrupt common social problems, increase work-family conflicts and endanger people’s general health. Aim To determine marital satisfaction and its relationship with job stress and general health of nurses. Methods This descriptive and cross-sectional study was done in 2015 in medical educational centers of Qazvin by using an ENRICH marital satisfaction scale and General Health and Job Stress questionnaires completed by 123 nurses. Analysis was done by SPSS version 19 using descriptive and analytical statistics (Pearson correlation, t-test, ANOVA, Chi-square, regression line, multiple regression analysis). Results The findings showed that 64.4% of nurses had marital satisfaction. There was significant relationship between age (p=0.03), job experience (p=0.01), age of spouse (p=0.01) and marital satisfaction. The results showed that there was a significant relationship between marital satisfaction and general health (p<0.0001). Multiple regression analysis showed that there was a significant relationship between depression (p=0.012) and anxiety (p=0.001) with marital satisfaction. Conclusions Due to high levels of job stress and disorder in general health of nurses and low marital satisfaction by running health promotion programs and paying attention to its dimensions can help work and family health of nurses. PMID:28607660

Hybrid-view programming of nuclear fusion simulation code in the PGAS parallel programming language XcalableMP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsugane, Keisuke; Boku, Taisuke; Murai, Hitoshi

Recently, the Partitioned Global Address Space (PGAS) parallel programming model has emerged as a usable distributed memory programming model. XcalableMP (XMP) is a PGAS parallel programming language that extends base languages such as C and Fortran with directives in OpenMP-like style. XMP supports a global-view model that allows programmers to define global data and to map them to a set of processors, which execute the distributed global data as a single thread. In XMP, the concept of a coarray is also employed for local-view programming. In this study, we port Gyrokinetic Toroidal Code - Princeton (GTC-P), which is a three-dimensionalmore » gyrokinetic PIC code developed at Princeton University to study the microturbulence phenomenon in magnetically confined fusion plasmas, to XMP as an example of hybrid memory model coding with the global-view and local-view programming models. In local-view programming, the coarray notation is simple and intuitive compared with Message Passing Interface (MPI) programming while the performance is comparable to that of the MPI version. Thus, because the global-view programming model is suitable for expressing the data parallelism for a field of grid space data, we implement a hybrid-view version using a global-view programming model to compute the field and a local-view programming model to compute the movement of particles. Finally, the performance is degraded by 20% compared with the original MPI version, but the hybrid-view version facilitates more natural data expression for static grid space data (in the global-view model) and dynamic particle data (in the local-view model), and it also increases the readability of the code for higher productivity.« less

Hybrid-view programming of nuclear fusion simulation code in the PGAS parallel programming language XcalableMP

DOE PAGES

Tsugane, Keisuke; Boku, Taisuke; Murai, Hitoshi; ...

2016-06-01

Recently, the Partitioned Global Address Space (PGAS) parallel programming model has emerged as a usable distributed memory programming model. XcalableMP (XMP) is a PGAS parallel programming language that extends base languages such as C and Fortran with directives in OpenMP-like style. XMP supports a global-view model that allows programmers to define global data and to map them to a set of processors, which execute the distributed global data as a single thread. In XMP, the concept of a coarray is also employed for local-view programming. In this study, we port Gyrokinetic Toroidal Code - Princeton (GTC-P), which is a three-dimensionalmore » gyrokinetic PIC code developed at Princeton University to study the microturbulence phenomenon in magnetically confined fusion plasmas, to XMP as an example of hybrid memory model coding with the global-view and local-view programming models. In local-view programming, the coarray notation is simple and intuitive compared with Message Passing Interface (MPI) programming while the performance is comparable to that of the MPI version. Thus, because the global-view programming model is suitable for expressing the data parallelism for a field of grid space data, we implement a hybrid-view version using a global-view programming model to compute the field and a local-view programming model to compute the movement of particles. Finally, the performance is degraded by 20% compared with the original MPI version, but the hybrid-view version facilitates more natural data expression for static grid space data (in the global-view model) and dynamic particle data (in the local-view model), and it also increases the readability of the code for higher productivity.« less

MinFinder v2.0: An improved version of MinFinder

NASA Astrophysics Data System (ADS)

Tsoulos, Ioannis G.; Lagaris, Isaac E.

2008-10-01

A new version of the "MinFinder" program is presented that offers an augmented linking procedure for Fortran-77 subprograms, two additional stopping rules and a new start-point rejection mechanism that saves a significant portion of gradient and function evaluations. The method is applied on a set of standard test functions and the results are reported. New version program summaryProgram title: MinFinder v2.0 Catalogue identifier: ADWU_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADWU_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC Licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 14 150 No. of bytes in distributed program, including test data, etc.: 218 144 Distribution format: tar.gz Programming language used: GNU C++, GNU FORTRAN, GNU C Computer: The program is designed to be portable in all systems running the GNU C++ compiler Operating system: Linux, Solaris, FreeBSD RAM: 200 000 bytes Classification: 4.9 Catalogue identifier of previous version: ADWU_v1_0 Journal reference of previous version: Computer Physics Communications 174 (2006) 166-179 Does the new version supersede the previous version?: Yes Nature of problem: A multitude of problems in science and engineering are often reduced to minimizing a function of many variables. There are instances that a local optimum does not correspond to the desired physical solution and hence the search for a better solution is required. Local optimization techniques can be trapped in any local minimum. Global optimization is then the appropriate tool. For example, solving a non-linear system of equations via optimization, one may encounter many local minima that do not correspond to solutions, i.e. they are far from zero. Solution method: Using a uniform pdf, points are sampled from a rectangular domain. A clustering technique, based on a typical distance and a gradient criterion, is used to decide from which points a local search should be started. Further searching is terminated when all the local minima inside the search domain are thought to be found. This is accomplished via three stopping rules: the "double-box" stopping rule, the "observables" stopping rule and the "expected minimizers" stopping rule. Reasons for the new version: The link procedure for source code in Fortran 77 is enhanced, two additional stopping rules are implemented and a new criterion for accepting-start points, that economizes on function and gradient calls, is introduced. Summary of revisions:Addition of command line parameters to the utility program make_program. Augmentation of the link process for Fortran 77 subprograms, by linking the final executable with the g2c library. Addition of two probabilistic stopping rules. Introduction of a rejection mechanism to the Checking step of the original method, that reduces the number of gradient evaluations. Additional comments: A technical report describing the revisions, experiments and test runs is packaged with the source code. Running time: Depending on the objective function.

Comparison of In-Person vs. Digital Climate Education Program

NASA Astrophysics Data System (ADS)

Anderson, R. K.; Flora, J. A.; Saphir, M.

2017-12-01

In 2014, ACE (Alliance for Climate Education) evaluated the impact of its 45-minute live climate edutainment education program on the knowledge, attitudes and behavior of high school students with respect to climate change. The results showed gains in knowledge, increased engagement, as well as increased communication about climate change with number of students reporting talking about climate change with friends and family more than doubling. In 2016, ACE launched a digital version of its in-person edutainment education program, a 40-minute video version of the live program. This digital version, Our Climate Our Future (OCOF), has now been used by nearly 4,000 teachers nationwide and viewed by over 150,000 students. We experimentally tested the impact of the digital program (OCOF) compared to the live program and a control group. The experiment was conducted with 709 students in 27 classes at two North Carolina public high schools. Classes were assigned to one of three conditions: digital, live and control. In the digital version, students watched the 40-minute OCOF video featuring the same educator that presented the live program. In the live version, students received an identical 40-minute live presentation by an ACE staff educator The control group received neither treatment. When compared to controls, both programs were effective in positively increasing climate change knowledge, climate justice knowledge, perceived self-efficacy to make climate-friendly behavior changes, and beliefs about climate change (all statistically significant at or above P<.01). In the areas of hope that people can solve climate change and intent to change behavior, only the live program showed significant increases. In these two areas, it may be that an in-person experience is key to affecting change. In light of these positive results, ACE plans to increase the use of OCOF in schools across the country to assist teachers in their efforts to teach about climate change.

Comparison of In-Person vs. Digital Climate Education Program

NASA Astrophysics Data System (ADS)

Anbar, A. D.; Elkins-Tanton, L. T.; Klug Boonstra, S.; Ben-Naim, D.

2016-12-01

In 2014, ACE (Alliance for Climate Education) evaluated the impact of its 45-minute live climate edutainment education program on the knowledge, attitudes and behavior of high school students with respect to climate change. The results showed gains in knowledge, increased engagement, as well as increased communication about climate change with number of students reporting talking about climate change with friends and family more than doubling. In 2016, ACE launched a digital version of its in-person edutainment education program, a 40-minute video version of the live program. This digital version, Our Climate Our Future (OCOF), has now been used by nearly 4,000 teachers nationwide and viewed by over 150,000 students. We experimentally tested the impact of the digital program (OCOF) compared to the live program and a control group. The experiment was conducted with 709 students in 27 classes at two North Carolina public high schools. Classes were assigned to one of three conditions: digital, live and control. In the digital version, students watched the 40-minute OCOF video featuring the same educator that presented the live program. In the live version, students received an identical 40-minute live presentation by an ACE staff educator The control group received neither treatment. When compared to controls, both programs were effective in positively increasing climate change knowledge, climate justice knowledge, perceived self-efficacy to make climate-friendly behavior changes, and beliefs about climate change (all statistically significant at or above P<.01). In the areas of hope that people can solve climate change and intent to change behavior, only the live program showed significant increases. In these two areas, it may be that an in-person experience is key to affecting change. In light of these positive results, ACE plans to increase the use of OCOF in schools across the country to assist teachers in their efforts to teach about climate change.

GEMPAK 5.1 - A GENERAL METEOROLOGICAL PACKAGE (VAX VMS VERSION)

NASA Technical Reports Server (NTRS)

Des, Jardins M. L.

1994-01-01

GEMPAK is a general meteorological software package developed at NASA/Goddard Space Flight Center. It includes programs to analyze and display surface, upper-air, and gridded data, including model output. There are very general programs to list, edit, and plot data on maps, to display profiles and time series, to draw and fill contours, to draw streamlines, to plot symbols for clouds, sky cover, and pressure tendency, and draw cross sections in the case of gridded data and sounding data. In addition, there are Barnes objective analysis programs to grid surface and upper-air data. The programs include the capabilities to derive meteorological parameters from those found in the dataset, to perform vertical interpolations of sounding data to different coordinate systems, and to compute an extensive set of gridded diagnostic quantities by specifying various nested combinations of scalars and vector arithmetic, algebraic, and differential operators. The GEMPAK 5.1 graphics/transformation subsystem, GEMPLT, provides device-independent graphics. GEMPLT also has the capability to display output in a variety of map projections or overlaid on satellite imagery. GEMPAK 5.1 is written in FORTRAN 77 and C-language and has been implemented on VAX computers under VMS and on computers running the UNIX operating system. During installation and normal use, this package occupies approximately 100Mb of hard disk space. The UNIX version of GEMPAK includes drivers for several graphic output systems including MIT's X Window System (X11,R4), Sun GKS, PostScript (color and monochrome), Silicon Graphics, and others. The VMS version of GEMPAK also includes drivers for several graphic output systems including PostScript (color and monochrome). The VMS version is delivered with the object code for the Transportable Applications Environment (TAE) program, version 4.1 which serves as a user interface. A color monitor is recommended for displaying maps on video display devices. Data for rendering regional maps is included with this package. The standard distribution medium for the UNIX version of GEMPAK 5.1 is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the VMS version of GEMPAK 5.1 is a 6250 BPI 9-track magnetic tape in DEC VAX BACKUP format. The VMS version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. This program was developed in 1985. The current version, GEMPAK 5.1, was released in 1992. The package is delivered with source code. An extensive collection of subroutine libraries allows users to format data for use by GEMPAK, to develop new programs, and to enhance existing ones.

Hyper-Fractal Analysis: A visual tool for estimating the fractal dimension of 4D objects

NASA Astrophysics Data System (ADS)

Grossu, I. V.; Grossu, I.; Felea, D.; Besliu, C.; Jipa, Al.; Esanu, T.; Bordeianu, C. C.; Stan, E.

2013-04-01

This work presents a new version of a Visual Basic 6.0 application for estimating the fractal dimension of images and 3D objects (Grossu et al. (2010) [1]). The program was extended for working with four-dimensional objects stored in comma separated values files. This might be of interest in biomedicine, for analyzing the evolution in time of three-dimensional images. New version program summaryProgram title: Hyper-Fractal Analysis (Fractal Analysis v03) Catalogue identifier: AEEG_v3_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEG_v3_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Standard CPC license, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 745761 No. of bytes in distributed program, including test data, etc.: 12544491 Distribution format: tar.gz Programming language: MS Visual Basic 6.0 Computer: PC Operating system: MS Windows 98 or later RAM: 100M Classification: 14 Catalogue identifier of previous version: AEEG_v2_0 Journal reference of previous version: Comput. Phys. Comm. 181 (2010) 831-832 Does the new version supersede the previous version? Yes Nature of problem: Estimating the fractal dimension of 4D images. Solution method: Optimized implementation of the 4D box-counting algorithm. Reasons for new version: Inspired by existing applications of 3D fractals in biomedicine [3], we extended the optimized version of the box-counting algorithm [1, 2] to the four-dimensional case. This might be of interest in analyzing the evolution in time of 3D images. The box-counting algorithm was extended in order to support 4D objects, stored in comma separated values files. A new form was added for generating 2D, 3D, and 4D test data. The application was tested on 4D objects with known dimension, e.g. the Sierpinski hypertetrahedron gasket, Df=ln(5)/ln(2) (Fig. 1). The algorithm could be extended, with minimum effort, to higher number of dimensions. Easy integration with other applications by using the very simple comma separated values file format for storing multi-dimensional images. Implementation of χ2 test as a criterion for deciding whether an object is fractal or not. User friendly graphical interface. Hyper-Fractal Analysis-Test on the Sierpinski hypertetrahedron 4D gasket (Df=ln(5)/ln(2)≅2.32). Running time: In a first approximation, the algorithm is linear [2]. References: [1] V. Grossu, D. Felea, C. Besliu, Al. Jipa, C.C. Bordeianu, E. Stan, T. Esanu, Computer Physics Communications, 181 (2010) 831-832. [2] I.V. Grossu, C. Besliu, M.V. Rusu, Al. Jipa, C. C. Bordeianu, D. Felea, Computer Physics Communications, 180 (2009) 1999-2001. [3] J. Ruiz de Miras, J. Navas, P. Villoslada, F.J. Esteban, Computer Methods and Programs in Biomedicine, 104 Issue 3 (2011) 452-460.

BUCKY instruction manual, version 3.3

NASA Technical Reports Server (NTRS)

Smith, James P.

1994-01-01

The computer program BUCKY is a p-version finite element package for the solution of structural problems. The current version of BUCKY solves the 2-D plane stress, 3-D plane stress plasticity, 3-D axisymmetric, Mindlin and Kirchoff plate bending, and buckling problems. The p-version of the finite element method is a highly accurate version of the traditional finite element method. Example cases are presented to show the accuracy and application of BUCKY.

78 FR 22536 - Procedural Manual for the Election Assistance Commission's Voting System Test Laboratories...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-16

... System Test Laboratories Program Manual, Version 2.0 AGENCY: United States Election Assistance Commission (EAC). ACTION: Notice; publication of Voting System Test Laboratories Program Manual, Version 2.0, for 60 day public comment period on EAC Web site. SUMMARY: The U.S. Election Assistance Commission (EAC...

Dr TIM: Ray-tracer TIM, with additional specialist scientific capabilities

NASA Astrophysics Data System (ADS)

Oxburgh, Stephen; Tyc, Tomáš; Courtial, Johannes

2014-03-01

We describe several extensions to TIM, a raytracing program for ray-optics research. These include relativistic raytracing; simulation of the external appearance of Eaton lenses, Luneburg lenses and generalised focusing gradient-index lens (GGRIN) lenses, which are types of perfect imaging devices; raytracing through interfaces between spaces with different optical metrics; and refraction with generalised confocal lenslet arrays, which are particularly versatile METATOYs. Catalogue identifier: AEKY_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKY_v2_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licencing provisions: GNU General Public License No. of lines in distributed program, including test data, etc.: 106905 No. of bytes in distributed program, including test data, etc.: 6327715 Distribution format: tar.gz Programming language: Java. Computer: Any computer capable of running the Java Virtual Machine (JVM) 1.6. Operating system: Any, developed under Mac OS X Version 10.6 and 10.8.3. RAM: Typically 130 MB (interactive version running under Mac OS X Version 10.8.3) Classification: 14, 18. Catalogue identifier of previous version: AEKY_v1_0 Journal reference of previous version: Comput. Phys. Comm. 183(2012)711 External routines: JAMA [1] (source code included) Does the new version supersede the previous version?: Yes Nature of problem: Visualisation of scenes that include scene objects that create wave-optically forbidden light-ray fields. Solution method: Ray tracing. Reasons for new version: Significant extension of the capabilities (see Summary of revisions), as demanded by our research. Summary of revisions: Added capabilities include the simulation of different types of camera moving at relativistic speeds relative to the scene; visualisation of the external appearance of generalised focusing gradient-index (GGRIN) lenses, including Maxwell fisheye, Eaton and Luneburg lenses; calculation of refraction at the interface between spaces with different optical metrics; and handling of generalised confocal lenslet arrays (gCLAs), a new type of METATOY. Unusual features: Specifically designed to visualise wave-optically forbidden light-ray fields; can visualise ray trajectories and geometric optic transformations; can simulate photos taken with different types of camera moving at relativistic speeds, interfaces between spaces with different optical metrics, the view through METATOYs and generalised focusing gradient-index lenses; can create anaglyphs (for viewing with coloured “3D glasses”), HDMI-1.4a standard 3D images, and random-dot autostereograms of the scene; integrable into web pages. Running time: Problem-dependent; typically seconds for a simple scene. References: [1] JAMA: A Java Matrix Package, http://math.nist.gov/javanumerics/jama/

Screening for postpartum depression using Kurdish version of Edinburgh postnatal depression scale.

PubMed

Ahmed, Hamdia Mirkhan; Alalaf, Shahla Kareem; Al-Tawil, Namir Ghanim

2012-05-01

One of the important public health problems affecting maternal and child health is postpartum depression (PPD). It generally occurs within 6-8 weeks after childbirth. To determine the prevalence of postpartum depression (PPD) using a Kurdish version of Edinburgh postpartum depression scale (EPDS) and to analyze the risk factors for postpartum depression in a population of puerperal Kurdish women in Erbil city. A cross-sectional study was conducted between 20th of June and 30th of November 2010, in 14 antenatal care units of primary health centers, in Erbil city, Kurdistan region, Iraq. The sample of the study included 1,000 puerperal women (6-8 weeks postpartum), ranging in age from 14 to 48 years. Data were collected after interviewing the women using a questionnaire designed by the researchers, and the Kurdish version of the EPDS. Chi square test of association and the logistic regression tests were used in the analysis. The prevalence of postpartum depression was 28.4%. Logistic regression analysis showed that the factors found to be associated with PPD were: physical or sexual abuse, delivery by cesarean section, history of past psychiatric illness, and family history of past psychiatric illness; while marriage with no previous agreement, and high socio-economic level were associated with lower levels of PPD. The Kurdish version of the EPDS can be successfully used to screen depression in a Kurdish population of puerperal women.

[The Confusion Assessment Method: Transcultural adaptation of a French version].

PubMed

Antoine, V; Belmin, J; Blain, H; Bonin-Guillaume, S; Goldsmith, L; Guerin, O; Kergoat, M-J; Landais, P; Mahmoudi, R; Morais, J A; Rataboul, P; Saber, A; Sirvain, S; Wolfklein, G; de Wazieres, B

2018-05-01

The Confusion Assessment Method (CAM) is a validated key tool in clinical practice and research programs to diagnose delirium and assess its severity. There is no validated French version of the CAM training manual and coding guide (Inouye SK). The aim of this study was to establish a consensual French version of the CAM and its manual. Cross-cultural adaptation to achieve equivalence between the original version and a French adapted version of the CAM manual. A rigorous process was conducted including control of cultural adequacy of the tool's components, double forward and back translations, reconciliation, expert committee review (including bilingual translators with different nationalities, a linguist, highly qualified clinicians, methodologists) and pretesting. A consensual French version of the CAM was achieved. Implementation of the CAM French version in daily clinical practice will enable optimal diagnosis of delirium diagnosis and enhance communication between health professionals in French speaking countries. Validity and psychometric properties are being tested in a French multicenter cohort, opening up new perspectives for improved quality of care and research programs in French speaking countries. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Effects of Two Versions of an Empathy-Based Rape Prevention Program on Fraternity Men's Survivor Empathy, Attitudes, and Behavioral Intent to Commit Rape or Sexual Assault

ERIC Educational Resources Information Center

Foubert, John D.; Newberry, Johnathan T.

2006-01-01

Fraternity men (N = 261) at a small to midsized public university saw one of two versions of a rape prevention program or were in a control group. Program participants reported significant increases in empathy toward rape survivors and significant declines in rape myth acceptance, likelihood of raping, and likelihood of committing sexual assault.…

AN ATTEMPT TO FIND AN A PRIORI MEASURE OF STEP SIZE. COMPARATIVE STUDIES OF PRINCIPLES FOR PROGRAMMING MATHEMATICS IN AUTOMATED INSTRUCTION, TECHNICAL REPORT NO. 13.

ERIC Educational Resources Information Center

ROSEN, ELLEN F.; STOLUROW, LAWRENCE M.

IN ORDER TO FIND A GOOD PREDICTOR OF EMPIRICAL DIFFICULTY, AN OPERATIONAL DEFINITION OF STEP SIZE, TEN PROGRAMER-JUDGES RATED CHANGE IN COMPLEXITY IN TWO VERSIONS OF A MATHEMATICS PROGRAM, AND THESE RATINGS WERE THEN COMPARED WITH MEASURES OF EMPIRICAL DIFFICULTY OBTAINED FROM STUDENT RESPONSE DATA. THE TWO VERSIONS, A 54 FRAME BOOKLET AND A 35…

Epi info - present and future.

PubMed

Su, Y; Yoon, S S

2003-01-01

Epi Info is a suite of public domain computer programs for public health professionals developed by the Centers for Disease Control and Prevention (CDC). Epi Info is used for rapid questionnaire design, data entry and validation, data analysis including mapping and graphing, and creation of reports. Epi Info was originally created in 1985 using Turbo Pascal. In 1998, the last version of Epi Info for DOS, version 6, was released. Epi Info for DOS is currently supported by CDC but is no longer updated. The current version, Epi Info 2002, is Windows-based software developed using Microsoft Visual Basic. Approximately 300,000 downloads of Epi Info software occurred in 2002 from approximately 130 countries. These numbers make Epi Info probably one of the most widely distributed and used public domain programs in the world. The DOS version of Epi Info was translated into 13 languages, and efforts are underway to translate the Windows version into other major languages. Versions already exist for Spanish, French, Portuguese, Chinese, Japanese, and Arabic.

The IAEA neutron coincidence counting (INCC) and the DEMING least-squares fitting programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krick, M.S.; Harker, W.C.; Rinard, P.M.

1998-12-01

Two computer programs are described: (1) the INCC (IAEA or International Neutron Coincidence Counting) program and (2) the DEMING curve-fitting program. The INCC program is an IAEA version of the Los Alamos NCC (Neutron Coincidence Counting) code. The DEMING program is an upgrade of earlier Windows{reg_sign} and DOS codes with the same name. The versions described are INCC 3.00 and DEMING 1.11. The INCC and DEMING codes provide inspectors with the software support needed to perform calibration and verification measurements with all of the neutron coincidence counting systems used in IAEA inspections for the nondestructive assay of plutonium and uranium.

Analysis of Learning Curve Fitting Techniques.

DTIC Science & Technology

1987-09-01

1986. 15. Neter, John and others. Applied Linear Regression Models. Homewood IL: Irwin, 19-33. 16. SAS User’s Guide: Basics, Version 5 Edition. SAS... Linear Regression Techniques (15:23-52). Random errors are assumed to be normally distributed when using -# ordinary least-squares, according to Johnston...lot estimated by the improvement curve formula. For a more detailed explanation of the ordinary least-squares technique, see Neter, et. al., Applied

AMPS/PC - AUTOMATIC MANUFACTURING PROGRAMMING SYSTEM

NASA Technical Reports Server (NTRS)

Schroer, B. J.

1994-01-01

The AMPS/PC system is a simulation tool designed to aid the user in defining the specifications of a manufacturing environment and then automatically writing code for the target simulation language, GPSS/PC. The domain of problems that AMPS/PC can simulate are manufacturing assembly lines with subassembly lines and manufacturing cells. The user defines the problem domain by responding to the questions from the interface program. Based on the responses, the interface program creates an internal problem specification file. This file includes the manufacturing process network flow and the attributes for all stations, cells, and stock points. AMPS then uses the problem specification file as input for the automatic code generator program to produce a simulation program in the target language GPSS. The output of the generator program is the source code of the corresponding GPSS/PC simulation program. The system runs entirely on an IBM PC running PC DOS Version 2.0 or higher and is written in Turbo Pascal Version 4 requiring 640K memory and one 360K disk drive. To execute the GPSS program, the PC must have resident the GPSS/PC System Version 2.0 from Minuteman Software. The AMPS/PC program was developed in 1988.

Automated evaluation of matrix elements between contracted wavefunctions: A Mathematica version of the FRODO program

NASA Astrophysics Data System (ADS)

Angeli, C.; Cimiraglia, R.

2013-02-01

A symbolic program performing the Formal Reduction of Density Operators (FRODO), formerly developed in the MuPAD computer algebra system with the purpose of evaluating the matrix elements of the electronic Hamiltonian between internally contracted functions in a complete active space (CAS) scheme, has been rewritten in Mathematica. New version : A program summaryProgram title: FRODO Catalogue identifier: ADV Y _v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADVY_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 3878 No. of bytes in distributed program, including test data, etc.: 170729 Distribution format: tar.gz Programming language: Mathematica Computer: Any computer on which the Mathematica computer algebra system can be installed Operating system: Linux Classification: 5 Catalogue identifier of previous version: ADV Y _v1_0 Journal reference of previous version: Comput. Phys. Comm. 171(2005)63 Does the new version supersede the previous version?: No Nature of problem. In order to improve on the CAS-SCF wavefunction one can resort to multireference perturbation theory or configuration interaction based on internally contracted functions (ICFs) which are obtained by application of the excitation operators to the reference CAS-SCF wavefunction. The previous formulation of such matrix elements in the MuPAD computer algebra system, has been rewritten using Mathematica. Solution method: The method adopted consists in successively eliminating all occurrences of inactive orbital indices (core and virtual) from the products of excitation operators which appear in the definition of the ICFs and in the electronic Hamiltonian expressed in the second quantization formalism. Reasons for new version: Some years ago we published in this journal a couple of papers [1, 2] hereafter to be referred to as papers I and II, respectively dedicated to the automated evaluation of the matrix elements of the molecular electronic Hamiltonian between internally contracted functions [3] (ICFs). In paper II the program FRODO (after Formal Reduction Of Density Operators) was presented with the purpose of providing working formulas for each occurrence of the ICFs. The original FRODO program was written in the MuPAD computer algebra system [4] and was actively used in our group for the generation of the matrix elements to be employed in the third-order n-electron valence state perturbation theory (NEVPT) [5-8] as well as in the internally contracted configuration interaction (IC-CI) [9]. We present a new version of the program FRODO written in the Mathematica system [10]. The reason for the rewriting of the program lies in the fact that, on the one hand, MuPAD does not seem to be any longer available as a stand-alone system and, on the other hand, Mathematica, due to its ubiquitousness, appears to be increasingly the computer algebra system most widely used nowadays. Restrictions: The program is limited to no more than doubly excited ICFs. Running time: The examples described in the Readme file take a few seconds to run. References: [1] C. Angeli, R. Cimiraglia, Comp. Phys. Comm. 166 (2005) 53. [2] C. Angeli, R. Cimiraglia, Comp. Phys. Comm. 171 (2005) 63. [3] H.-J. Werner, P. J. Knowles, Adv. Chem. Phys. 89 (1988) 5803. [4] B. Fuchssteiner, W. Oevel: http://www.mupad.de Mupad research group, university of Paderborn. Mupad version 2.5.3 for Linux. [5] C. Angeli, R. Cimiraglia, S. Evangelisti, T. Leininger, J.-P. Malrieu, J. Chem. Phys. 114 (2001) 10252. [6] C. Angeli, R. Cimiraglia, J.-P. Malrieu, J. Chem. Phys. 117 (2002) 9138. [7] C. Angeli, B. Bories, A. Cavallini, R. Cimiraglia, J. Chem. Phys. 124 (2006) 054108. [8] C. Angeli, M. Pastore, R. Cimiraglia, Theor. Chem. Acc. 117 (2007) 743. [9] C. Angeli, R. Cimiraglia, Mol. Phys. in press, DOI:10.1080/00268976.2012.689872 [10] http://www.wolfram.com/Mathematica. Mathematica version 8 for Linux.

A general spectral method for the numerical simulation of one-dimensional interacting fermions

NASA Astrophysics Data System (ADS)

Clason, Christian; von Winckel, Gregory

2012-08-01

This software implements a general framework for the direct numerical simulation of systems of interacting fermions in one spatial dimension. The approach is based on a specially adapted nodal spectral Galerkin method, where the basis functions are constructed to obey the antisymmetry relations of fermionic wave functions. An efficient Matlab program for the assembly of the stiffness and potential matrices is presented, which exploits the combinatorial structure of the sparsity pattern arising from this discretization to achieve optimal run-time complexity. This program allows the accurate discretization of systems with multiple fermions subject to arbitrary potentials, e.g., for verifying the accuracy of multi-particle approximations such as Hartree-Fock in the few-particle limit. It can be used for eigenvalue computations or numerical solutions of the time-dependent Schrödinger equation. The new version includes a Python implementation of the presented approach. New version program summaryProgram title: assembleFermiMatrix Catalogue identifier: AEKO_v1_1 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKO_v1_1.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 332 No. of bytes in distributed program, including test data, etc.: 5418 Distribution format: tar.gz Programming language: MATLAB/GNU Octave, Python Computer: Any architecture supported by MATLAB, GNU Octave or Python Operating system: Any supported by MATLAB, GNU Octave or Python RAM: Depends on the data Classification: 4.3, 2.2. External routines: Python 2.7+, NumPy 1.3+, SciPy 0.10+ Catalogue identifier of previous version: AEKO_v1_0 Journal reference of previous version: Comput. Phys. Commun. 183 (2012) 405 Does the new version supersede the previous version?: Yes Nature of problem: The direct numerical solution of the multi-particle one-dimensional Schrödinger equation in a quantum well is challenging due to the exponential growth in the number of degrees of freedom with increasing particles. Solution method: A nodal spectral Galerkin scheme is used where the basis functions are constructed to obey the antisymmetry relations of the fermionic wave function. The assembly of these matrices is performed efficiently by exploiting the combinatorial structure of the sparsity patterns. Reasons for new version: A Python implementation is now included. Summary of revisions: Added a Python implementation; small documentation fixes in Matlab implementation. No change in features of the package. Restrictions: Only one-dimensional computational domains with homogeneous Dirichlet or periodic boundary conditions are supported. Running time: Seconds to minutes.

The NASA/MSFC global reference atmospheric model: 1990 version (GRAM-90). Part 2: Program/data listings

NASA Technical Reports Server (NTRS)

Justus, C. G.; Alyea, F. N.; Cunnold, D. M.; Jeffries, W. R., III; Johnson, D. L.

1991-01-01

A new (1990) version of the NASA/MSFC Global Reference Atmospheric Model (GRAM-90) was completed and the program and key data base listing are presented. GRAM-90 incorporate extensive new data, mostly collected under the Middle Atmosphere Program, to produce a completely revised middle atmosphere model (20 to 120 km). At altitudes greater than 120 km, GRAM-90 uses the NASA Marshall Engineering Thermosphere model. Complete listings of all program and major data bases are presented. Also, a test case is included.

MSFC crack growth analysis computer program, version 2 (users manual)

NASA Technical Reports Server (NTRS)

Creager, M.

1976-01-01

An updated version of the George C. Marshall Space Flight Center Crack Growth Analysis Program is described. The updated computer program has significantly expanded capabilities over the original one. This increased capability includes an extensive expansion of the library of stress intensity factors, plotting capability, increased design iteration capability, and the capability of performing proof test logic analysis. The technical approaches used within the computer program are presented, and the input and output formats and options are described. Details of the stress intensity equations, example data, and example problems are presented.

A new version of code Java for 3D simulation of the CCA model

NASA Astrophysics Data System (ADS)

Zhang, Kebo; Xiong, Hailing; Li, Chao

2016-07-01

In this paper we present a new version of the program of CCA model. In order to benefit from the advantages involved in the latest technologies, we migrated the running environment from JDK1.6 to JDK1.7. And the old program was optimized into a new framework, so promoted extendibility.

Analyses of Receptive and Productive Korean EFL Vocabulary: Computer-Based Vocabulary Learning Program

ERIC Educational Resources Information Center

Kim, Scott Sungki

2013-01-01

The present research study investigated the effects of 8 versions of a computer-based vocabulary learning program on receptive and productive knowledge levels of college students. The participants were 106 male and 103 female Korean EFL students from Kyungsung University and Kwandong University in Korea. Students who participated in versions of…

MODIFIED N.R.C. VERSION OF THE U.S.G.S. SOLUTE TRANSPORT MODEL. VOLUME 1. MODIFICATIONS

EPA Science Inventory

The methods described in the report can be used with the modified N.R.C. version of the U.S.G.S. Solute Transport Model to predict the concentration of chemical parameters in a contaminant plume. The two volume report contains program documentation and user's manual. The program ...

Master Teachers as Professional Developers: Managing Conflicting Versions of Professionalism

ERIC Educational Resources Information Center

Montecinos, Carmen; Pino, Mauricio; Campos-Martinez, Javier; Domínguez, Rosario; Carreño, Claudia

2014-01-01

As education's main workforce, teachers have been the target of policies designed to shape and affirm new versions of professionalism. This paper examines this issue as it is exemplified by the Teachers of Teachers Network (TTN), a program developed by Chile's Ministry of Education. As a program designed to identify and reward high quality…

Markov chains for testing redundant software

NASA Technical Reports Server (NTRS)

White, Allan L.; Sjogren, Jon A.

1988-01-01

A preliminary design for a validation experiment has been developed that addresses several problems unique to assuring the extremely high quality of multiple-version programs in process-control software. The procedure uses Markov chains to model the error states of the multiple version programs. The programs are observed during simulated process-control testing, and estimates are obtained for the transition probabilities between the states of the Markov chain. The experimental Markov chain model is then expanded into a reliability model that takes into account the inertia of the system being controlled. The reliability of the multiple version software is computed from this reliability model at a given confidence level using confidence intervals obtained for the transition probabilities during the experiment. An example demonstrating the method is provided.

Star adaptation for two-algorithms used on serial computers

NASA Technical Reports Server (NTRS)

Howser, L. M.; Lambiotte, J. J., Jr.

1974-01-01

Two representative algorithms used on a serial computer and presently executed on the Control Data Corporation 6000 computer were adapted to execute efficiently on the Control Data STAR-100 computer. Gaussian elimination for the solution of simultaneous linear equations and the Gauss-Legendre quadrature formula for the approximation of an integral are the two algorithms discussed. A description is given of how the programs were adapted for STAR and why these adaptations were necessary to obtain an efficient STAR program. Some points to consider when adapting an algorithm for STAR are discussed. Program listings of the 6000 version coded in 6000 FORTRAN, the adapted STAR version coded in 6000 FORTRAN, and the STAR version coded in STAR FORTRAN are presented in the appendices.

ISICS2011, an updated version of ISICS: A program for calculation K-, L-, and M-shell cross sections from PWBA and ECPSSR theories using a personal computer

NASA Astrophysics Data System (ADS)

Cipolla, Sam J.

2011-11-01

In this new version of ISICS, called ISICS2011, a few omissions and incorrect entries in the built-in file of electron binding energies have been corrected; operational situations leading to un-physical behavior have been identified and flagged. New version program summaryProgram title: ISICS2011 Catalogue identifier: ADDS_v5_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADDS_v5_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 6011 No. of bytes in distributed program, including test data, etc.: 130 587 Distribution format: tar.gz Programming language: C Computer: 80486 or higher-level PCs Operating system: WINDOWS XP and all earlier operating systems Classification: 16.7 Catalogue identifier of previous version: ADDS_v4_0 Journal reference of previous version: Comput. Phys. Commun. 180 (2009) 1716. Does the new version supersede the previous version?: Yes Nature of problem: Ionization and X-ray production cross section calculations for ion-atom collisions. Solution method: Numerical integration of form factor using a logarithmic transform and Gaussian quadrature, plus exact integration limits. Reasons for new version: General need for higher precision in output format for projectile energies; some built-in binding energies needed correcting; some anomalous results occur due to faulty read-in data or calculated parameters becoming un-physical; erroneous calculations could result for the L and M shells when restricted K-shell options are inadvertently chosen; to achieve general compatibility with ISICSoo, a companion C++ version that is portable to Linux and MacOS platforms, has been submitted for publication in the CPC Program Library approximately at the same time as this present new standalone version of ISICS [1]. Summary of revisions: The format field for projectile energies in the output has been expanded from two to four decimal places in order to distinguish between closely spaced energy values. There were a few entries in the executable binding energy file that needed correcting; K shell of Eu, M shells of Zn, M1 shell of Kr. The corrected values were also entered in the ENERGY.DAT file. In addition, an alternate data file of binding energies is included, called ENERGY_GW.DAT, which is more up-to-date [2]. Likewise, an alternate atomic parameters data file is now included, called FLOURE_JC.DAT, which is more up-to-date [3] fluorescence yields for the K and L shells and Coster-Kronig parameters for the L shell. Both data files can be read in using the -f usage option. To do this, the original energy file should be renamed and saved (e.g., ENERGY_BB.DAT) and the new file (ENERGY_GW.DAT ) should be duplicated as ENERGY.DAT to be read in using the -f option. Similarly for reading in an alternate FLOURE.DAT file. As with previous versions, the user can also simply input different values of any input quantity by invoking the "specify your own parameters" option from the main menu. You can also use this option to simply check the values of the built-in values of the parameters. If it still happens that a zero binding energy for a particular sub-shell is read in, the program will not completely abort, but will calculate results for the other sub-shells while setting the affected sub-shell output to zero. In calculating the Coulomb deflection factor, if the quantity inside the radical sign of the parameter z z=√{(1} becomes zero or negative, to prevent the program from aborting, the PWBA cross sections are still calculated while the ECPSSR cross sections are set to zero. This situation can happen for very low energy collisions, such as were noticed for helium ions on copper at energies of E⩽11.2 keV. It was observed during the engineering of ISICSoo [1] that erroneous calculations could result for the L- and M-shell cases when restricted K-shell R or HSR scaling options were inappropriately chosen. The program has now been fixed so that these inappropriate options are ignored for the L and M shells. In the previous versions, the usage for inputting a batch data file was incorrectly stated in the Users Manual as -Bxxx; the correct designation is -Fxxx, or alternatively, -Ixxx, as indicated on the usage screen in running the program. A revised Users Manual is also available. Restrictions: The consumed CPU time increases with the atomic shell (K, L, M), but execution is still very fast. Running time: This depends on which shell and the number of different energies to be used in the calculation. The running time is not significantly changed from the previous version.

New version of PLNoise: a package for exact numerical simulation of power-law noises

NASA Astrophysics Data System (ADS)

Milotti, Edoardo

2007-08-01

In a recent paper I have introduced a package for the exact simulation of power-law noises and other colored noises [E. Milotti, Comput. Phys. Comm. 175 (2006) 212]: in particular, the algorithm generates 1/f noises with 0<α⩽2. Here I extend the algorithm to generate 1/f noises with 2<α⩽4 (black noises). The method is exact in the sense that it produces a sampled process with a theoretically guaranteed range-limited power-law spectrum for any arbitrary sequence of sampling intervals, i.e. the sampling times may be unevenly spaced. Program summaryTitle of program: PLNoise Catalogue identifier:ADXV_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADXV_v2_0.html Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Programming language used: ANSI C Computer: Any computer with an ANSI C compiler: the package has been tested with gcc version 3.2.3 on Red Hat Linux 3.2.3-52 and gcc version 4.0.0 and 4.0.1 on Apple Mac OS X-10.4 Operating system: All operating systems capable of running an ANSI C compiler RAM: The code of the test program is very compact (about 60 Kbytes), but the program works with list management and allocates memory dynamically; in a typical run with average list length 2ṡ10, the RAM taken by the list is 200 Kbytes External routines: The package needs external routines to generate uniform and exponential deviates. The implementation described here uses the random number generation library ranlib freely available from Netlib [B.W. Brown, J. Lovato, K. Russell: ranlib, available from Netlib, http://www.netlib.org/random/index.html, select the C version ranlib.c], but it has also been successfully tested with the random number routines in Numerical Recipes [W.H. Press, S.A. Teulkolsky, W.T. Vetterling, B.P. Flannery, Numerical Recipes in C: The Art of Scientific Computing, second ed., Cambridge Univ. Press., Cambridge, 1992, pp. 274-290]. Notice that ranlib requires a pair of routines from the linear algebra package LINPACK, and that the distribution of ranlib includes the C source of these routines, in case LINPACK is not installed on the target machine. No. of lines in distributed program, including test data, etc.:2975 No. of bytes in distributed program, including test data, etc.:194 588 Distribution format:tar.gz Catalogue identifier of previous version: ADXV_v1_0 Journal reference of previous version: Comput. Phys. Comm. 175 (2006) 212 Does the new version supersede the previous version?: Yes Nature of problem: Exact generation of different types of colored noise. Solution method: Random superposition of relaxation processes [E. Milotti, Phys. Rev. E 72 (2005) 056701], possibly followed by an integration step to produce noise with spectral index >2. Reasons for the new version: Extension to 1/f noises with spectral index 2<α⩽4: the new version generates both noises with spectral with spectral index 0<α⩽2 and with 2<α⩽4. Summary of revisions: Although the overall structure remains the same, one routine has been added and several changes have been made throughout the code to include the new integration step. Unusual features: The algorithm is theoretically guaranteed to be exact, and unlike all other existing generators it can generate samples with uneven spacing. Additional comments: The program requires an initialization step; for some parameter sets this may become rather heavy. Running time: Running time varies widely with different input parameters, however in a test run like the one in Section 3 in the long write-up, the generation routine took on average about 75 μs for each sample.

Eye movements as a function of response contingencies measured by blackout technique1

PubMed Central

Doran, Judith; Holland, James G.

1971-01-01

A program may have a low error rate but, at the same time, require little of the student and teach him little. A measure to supplement error rate in evaluating a program has recently been developed. This measure, called the blackout ratio, is the percentage of material that may be deleted without increasing the error rate. In high blackout-ratio programs, obtaining a correct answer is contingent upon only a small portion of the item. The present study determined if such low response-contingent material is read less thoroughly than programmed material that is heavily response-contingent. Eye movements were compared for two versions of the same program that differed only in the choice of the omitted words. The alteration of the required responses resulted in a version with a higher blackout ratio than the original version, which had a low blackout ratio. Eighteen undergraduates received half their material from the high and half their material from the low blackout-ratio version. The order was counterbalanced. Location and duration of all eye fixations in each item were recorded by a Mackworth Eye Marker Camera. On high blackout-ratio material, subjects used fewer fixations, shorter fixation time, and shorter scanning time. High blackout-ratio material failed to evoke the students' attention. PMID:16795275

ROOT — A C++ framework for petabyte data storage, statistical analysis and visualization

NASA Astrophysics Data System (ADS)

Antcheva, I.; Ballintijn, M.; Bellenot, B.; Biskup, M.; Brun, R.; Buncic, N.; Canal, Ph.; Casadei, D.; Couet, O.; Fine, V.; Franco, L.; Ganis, G.; Gheata, A.; Maline, D. Gonzalez; Goto, M.; Iwaszkiewicz, J.; Kreshuk, A.; Segura, D. Marcos; Maunder, R.; Moneta, L.; Naumann, A.; Offermann, E.; Onuchin, V.; Panacek, S.; Rademakers, F.; Russo, P.; Tadel, M.

2011-06-01

A new stable version ("production version") v5.28.00 of ROOT [1] has been published [2]. It features several major improvements in many areas, most noteworthy data storage performance as well as statistics and graphics features. Some of these improvements have already been predicted in the original publication Antcheva et al. (2009) [3]. This version will be maintained for at least 6 months; new minor revisions ("patch releases") will be published [4] to solve problems reported with this version. New version program summaryProgram title: ROOT Catalogue identifier: AEFA_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEFA_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU Lesser Public License v.2.1 No. of lines in distributed program, including test data, etc.: 2 934 693 No. of bytes in distributed program, including test data, etc.: 1009 Distribution format: tar.gz Programming language: C++ Computer: Intel i386, Intel x86-64, Motorola PPC, Sun Sparc, HP PA-RISC Operating system: GNU/Linux, Windows XP/Vista/7, Mac OS X, FreeBSD, OpenBSD, Solaris, HP-UX, AIX Has the code been vectorized or parallelized?: Yes RAM: > 55 Mbytes Classification: 4, 9, 11.9, 14 Catalogue identifier of previous version: AEFA_v1_0 Journal reference of previous version: Comput. Phys. Commun. 180 (2009) 2499 Does the new version supersede the previous version?: Yes Nature of problem: Storage, analysis and visualization of scientific data Solution method: Object store, wide range of analysis algorithms and visualization methods Reasons for new version: Added features and corrections of deficiencies Summary of revisions: The release notes at http://root.cern.ch/root/v528/Version528.news.html give a module-oriented overview of the changes in v5.28.00. Highlights include File format Reading of TTrees has been improved dramatically with respect to CPU time (30%) and notably with respect to disk space. Histograms A new TEfficiency class has been provided to handle the calculation of efficiencies and their uncertainties, TH2Poly for polygon-shaped bins (e.g. maps), TKDE for kernel density estimation, and TSVDUnfold for singular value decomposition. Graphics Kerning is now supported in TLatex, PostScript and PDF; a table of contents can be added to PDF files. A new font provides italic symbols. A TPad containing GL can be stored in a binary (i.e. non-vector) image file; add support for full-scene anti-aliasing. Usability enhancements to EVE. Math New interfaces for generating random number according to a given distribution, goodness of fit tests of unbinned data, binning multidimensional data, and several advanced statistical functions were added. RooFit Introduction of HistFactory; major additions to RooStats. TMVA Updated to version 4.1.0, adding e.g. the support for simultaneous classification of multiple output classes for several multivariate methods. PROOF Many new features, adding to PROOF's usability, plus improvements and fixes. PyROOT Support of Python 3 has been added. Tutorials Several new tutorials were provided for above new features (notably RooStats). A detailed list of all the changes is available at http://root.cern.ch/root/htmldoc/examples/V5. Additional comments: For an up-to-date author list see: http://root.cern.ch/drupal/content/root-development-team and http://root.cern.ch/drupal/content/former-root-developers. The distribution file for this program is over 30 Mbytes and therefore is not delivered directly when download or E-mail is requested. Instead a html file giving details of how the program can be obtained is sent. Running time: Depending on the data size and complexity of analysis algorithms. References: id="pr0100" view="all">http://root.cern.ch. http://root.cern.ch/drupal/content/production-version-528. I. Antcheva, M. Ballintijn, B. Bellenot, M. Biskup, R. Brun, N. Buncic, Ph. Canal, D. Casadei, O. Couet, V. Fine, L. Franco, G. Ganis, A. Gheata, D. Gonzalez Maline, M. Goto, J. Iwaszkiewicz, A. Kreshuk, D. Marcos Segura, R. Maunder, L. Moneta, A. Naumann, E. Offermann, V. Onuchin, S. Panacek, F. Rademakers, P. Russo, M. Tadel, ROOT — A C++ framework for petabyte data storage, statistical analysis and visualization, Comput. Phys. Commun. 180 (2009) 2499. http://root.cern.ch/drupal/content/root-version-v5-28-00-patch-release-notes.

Predictors and correlations of emotional intelligence among medical students at King Abdulaziz University, Jeddah

PubMed Central

Ibrahim, Nahla Khamis; Algethmi, Wafaa Ali; Binshihon, Safia Mohammad; Almahyawi, Rawan Aesh; Alahmadi, Razan Faisal; Baabdullah, Maha Yousef

2017-01-01

Objectives: To determine the predictors of Emotional Intelligence (EI), and its relationship with academic performance, leadership capacity, self-efficacy and the perceived stress between medical students at King Abdulaziz University, Jeddah, Saudi Arabia. Methods: A cross-sectional study was done among 540 students selected through a multi-stage stratified random sampling method during 2015/2016. A standardized, confidential data collection sheet was used. It included Schutte Self-Report Emotional Intelligence (SSREI) scale, Authentic Leadership questionnaire, General Self-Efficacy Scale and the short version of Perceived Stress Scale (PSS-4). Both descriptive and inferential statistics were done, and a multiple linear regression model was constructed. Results: The predictors of high EI were gender (female), increasing age, and being non-smoker. EI was positively associated with better academic performance, leadership capacity and self-efficacy. It was negatively correlated to perceived-stress. Conclusion: Female gender, age, non-smoking were the predictors of high EI. Conduction of holistic training programs on EI, leadership and self-efficacy are recommended. More smoking control programs and stress management courses are required. PMID:29142542

MMB-4 Inhibition of Aceylcholinesterase Is Similar across Species

DTIC Science & Technology

2014-11-01

version 5.4). An IC50 value was determined for AChE from each animal species by fitting the percent of AChE activity with respect to MMB 4 concentration...in GraphPad Prism (version 5) using a nonlinear regression dose response model for inhibition (normalized response with variable slope). Assessing the...Therefore, AChE activity and inhibition studies were carried out at 435 nm to reduce interference from MMB 4. Comparison of IC50 Values for MMB 4 with AChE

[A SAS marco program for batch processing of univariate Cox regression analysis for great database].

PubMed

Yang, Rendong; Xiong, Jie; Peng, Yangqin; Peng, Xiaoning; Zeng, Xiaomin

2015-02-01

To realize batch processing of univariate Cox regression analysis for great database by SAS marco program. We wrote a SAS macro program, which can filter, integrate, and export P values to Excel by SAS9.2. The program was used for screening survival correlated RNA molecules of ovarian cancer. A SAS marco program could finish the batch processing of univariate Cox regression analysis, the selection and export of the results. The SAS macro program has potential applications in reducing the workload of statistical analysis and providing a basis for batch processing of univariate Cox regression analysis.

Computer programs to characterize alloys and predict cyclic life using the total strain version of strainrange partitioning: Tutorial and users manual, version 1.0

NASA Technical Reports Server (NTRS)

Saltsman, James F.

1992-01-01

This manual presents computer programs for characterizing and predicting fatigue and creep-fatigue resistance of metallic materials in the high-temperature, long-life regime for isothermal and nonisothermal fatigue. The programs use the total strain version of Strainrange Partitioning (TS-SRP). An extensive database has also been developed in a parallel effort. This database is probably the largest source of high-temperature, creep-fatigue test data available in the public domain and can be used with other life prediction methods as well. This users manual, software, and database are all in the public domain and are available through COSMIC (382 East Broad Street, Athens, GA 30602; (404) 542-3265, FAX (404) 542-4807). Two disks accompany this manual. The first disk contains the source code, executable files, and sample output from these programs. The second disk contains the creep-fatigue data in a format compatible with these programs.

MPI implementation of PHOENICS: A general purpose computational fluid dynamics code

NASA Astrophysics Data System (ADS)

Simunovic, S.; Zacharia, T.; Baltas, N.; Spalding, D. B.

1995-03-01

PHOENICS is a suite of computational analysis programs that are used for simulation of fluid flow, heat transfer, and dynamical reaction processes. The parallel version of the solver EARTH for the Computational Fluid Dynamics (CFD) program PHOENICS has been implemented using Message Passing Interface (MPI) standard. Implementation of MPI version of PHOENICS makes this computational tool portable to a wide range of parallel machines and enables the use of high performance computing for large scale computational simulations. MPI libraries are available on several parallel architectures making the program usable across different architectures as well as on heterogeneous computer networks. The Intel Paragon NX and MPI versions of the program have been developed and tested on massively parallel supercomputers Intel Paragon XP/S 5, XP/S 35, and Kendall Square Research, and on the multiprocessor SGI Onyx computer at Oak Ridge National Laboratory. The preliminary testing results of the developed program have shown scalable performance for reasonably sized computational domains.

MPI implementation of PHOENICS: A general purpose computational fluid dynamics code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simunovic, S.; Zacharia, T.; Baltas, N.

1995-04-01

PHOENICS is a suite of computational analysis programs that are used for simulation of fluid flow, heat transfer, and dynamical reaction processes. The parallel version of the solver EARTH for the Computational Fluid Dynamics (CFD) program PHOENICS has been implemented using Message Passing Interface (MPI) standard. Implementation of MPI version of PHOENICS makes this computational tool portable to a wide range of parallel machines and enables the use of high performance computing for large scale computational simulations. MPI libraries are available on several parallel architectures making the program usable across different architectures as well as on heterogeneous computer networks. Themore » Intel Paragon NX and MPI versions of the program have been developed and tested on massively parallel supercomputers Intel Paragon XP/S 5, XP/S 35, and Kendall Square Research, and on the multiprocessor SGI Onyx computer at Oak Ridge National Laboratory. The preliminary testing results of the developed program have shown scalable performance for reasonably sized computational domains.« less

Space Shuttle Orbiter flight heating rate measurement sensitivity to thermal protection system uncertainties

NASA Technical Reports Server (NTRS)

Bradley, P. F.; Throckmorton, D. A.

1981-01-01

A study was completed to determine the sensitivity of computed convective heating rates to uncertainties in the thermal protection system thermal model. Those parameters considered were: density, thermal conductivity, and specific heat of both the reusable surface insulation and its coating; coating thickness and emittance; and temperature measurement uncertainty. The assessment used a modified version of the computer program to calculate heating rates from temperature time histories. The original version of the program solves the direct one dimensional heating problem and this modified version of The program is set up to solve the inverse problem. The modified program was used in thermocouple data reduction for shuttle flight data. Both nominal thermal models and altered thermal models were used to determine the necessity for accurate knowledge of thermal protection system's material thermal properties. For many thermal properties, the sensitivity (inaccuracies created in the calculation of convective heating rate by an altered property) was very low.

COMPPAP - COMPOSITE PLATE BUCKLING ANALYSIS PROGRAM (IBM PC VERSION)

NASA Technical Reports Server (NTRS)

Smith, J. P.

1994-01-01

The Composite Plate Buckling Analysis Program (COMPPAP) was written to help engineers determine buckling loads of orthotropic (or isotropic) irregularly shaped plates without requiring hand calculations from design curves or extensive finite element modeling. COMPPAP is a one element finite element program that utilizes high-order displacement functions. The high order of the displacement functions enables the user to produce results more accurate than traditional h-finite elements. This program uses these high-order displacement functions to perform a plane stress analysis of a general plate followed by a buckling calculation based on the stresses found in the plane stress solution. The current version assumes a flat plate (constant thickness) subject to a constant edge load (normal or shear) on one or more edges. COMPPAP uses the power method to find the eigenvalues of the buckling problem. The power method provides an efficient solution when only one eigenvalue is desired. Once the eigenvalue is found, the eigenvector, which corresponds to the plate buckling mode shape, results as a by-product. A positive feature of the power method is that the dominant eigenvalue is the first found, which is this case is the plate buckling load. The reported eigenvalue expresses a load factor to induce plate buckling. COMPPAP is written in ANSI FORTRAN 77. Two machine versions are available from COSMIC: a PC version (MSC-22428), which is for IBM PC 386 series and higher computers and compatibles running MS-DOS; and a UNIX version (MSC-22286). The distribution medium for both machine versions includes source code for both single and double precision versions of COMPPAP. The PC version includes source code which has been optimized for implementation within DOS memory constraints as well as sample executables for both the single and double precision versions of COMPPAP. The double precision versions of COMPPAP have been successfully implemented on an IBM PC 386 compatible running MS-DOS, a Sun4 series computer running SunOS, an HP-9000 series computer running HP-UX, and a CRAY X-MP series computer running UNICOS. COMPPAP requires 1Mb of RAM and the BLAS and LINPACK math libraries, which are included on the distribution medium. The COMPPAP documentation provides instructions for using the commercial post-processing package PATRAN for graphical interpretation of COMPPAP output. The UNIX version includes two electronic versions of the documentation: one in LaTex format and one in PostScript format. The standard distribution medium for the PC version (MSC-22428) is a 5.25 inch 1.2Mb MS-DOS format diskette. The standard distribution medium for the UNIX version (MSC-22286) is a .25 inch streaming magnetic tape cartridge (Sun QIC-24) in UNIX tar format. For the UNIX version, alternate distribution media and formats are available upon request. COMPPAP was developed in 1992.

COMPPAP - COMPOSITE PLATE BUCKLING ANALYSIS PROGRAM (UNIX VERSION)

NASA Technical Reports Server (NTRS)

Smith, J. P.

1994-01-01

The Composite Plate Buckling Analysis Program (COMPPAP) was written to help engineers determine buckling loads of orthotropic (or isotropic) irregularly shaped plates without requiring hand calculations from design curves or extensive finite element modeling. COMPPAP is a one element finite element program that utilizes high-order displacement functions. The high order of the displacement functions enables the user to produce results more accurate than traditional h-finite elements. This program uses these high-order displacement functions to perform a plane stress analysis of a general plate followed by a buckling calculation based on the stresses found in the plane stress solution. The current version assumes a flat plate (constant thickness) subject to a constant edge load (normal or shear) on one or more edges. COMPPAP uses the power method to find the eigenvalues of the buckling problem. The power method provides an efficient solution when only one eigenvalue is desired. Once the eigenvalue is found, the eigenvector, which corresponds to the plate buckling mode shape, results as a by-product. A positive feature of the power method is that the dominant eigenvalue is the first found, which is this case is the plate buckling load. The reported eigenvalue expresses a load factor to induce plate buckling. COMPPAP is written in ANSI FORTRAN 77. Two machine versions are available from COSMIC: a PC version (MSC-22428), which is for IBM PC 386 series and higher computers and compatibles running MS-DOS; and a UNIX version (MSC-22286). The distribution medium for both machine versions includes source code for both single and double precision versions of COMPPAP. The PC version includes source code which has been optimized for implementation within DOS memory constraints as well as sample executables for both the single and double precision versions of COMPPAP. The double precision versions of COMPPAP have been successfully implemented on an IBM PC 386 compatible running MS-DOS, a Sun4 series computer running SunOS, an HP-9000 series computer running HP-UX, and a CRAY X-MP series computer running UNICOS. COMPPAP requires 1Mb of RAM and the BLAS and LINPACK math libraries, which are included on the distribution medium. The COMPPAP documentation provides instructions for using the commercial post-processing package PATRAN for graphical interpretation of COMPPAP output. The UNIX version includes two electronic versions of the documentation: one in LaTex format and one in PostScript format. The standard distribution medium for the PC version (MSC-22428) is a 5.25 inch 1.2Mb MS-DOS format diskette. The standard distribution medium for the UNIX version (MSC-22286) is a .25 inch streaming magnetic tape cartridge (Sun QIC-24) in UNIX tar format. For the UNIX version, alternate distribution media and formats are available upon request. COMPPAP was developed in 1992.

Exploration of Factors Predictive of At-risk Fathers' Participation in a Pilot Study of an Augmented Evidence-Based Parent Training Program: A Mixed Methods Approach.

PubMed

Rostad, Whitney L; Self-Brown, Shannon; Boyd, Clinton; Osborne, Melissa; Patterson, Alexandria

2017-08-01

There has been burgeoning parenting intervention research specifically addressing fathers in recent decades. Corresponding research examining their participation and engagement in evidence-based parent training programs, which have almost exclusively targeted mothers, is just emerging. The current study used mixed methods to examine factors that influenced completion of an augmented version of an evidence-based child maltreatment prevention program developed for male caregivers called SafeCare Dad to Kids (Dad2K) in a pilot study. The current sample comprised 50 male caregivers ( M age = 29.42 years, SD = 8.18) of a child between the ages of 2 and 5 years. Fathers participated in a baseline assessment and were considered program completers (n = 27) if they participated in the program's six home visiting sessions. A subsample of completers (n = 11) was recruited to participate in qualitative interviews that provided in-depth information about fathers' experiences in Dad2K. Logistic regression indicated that, in the context of other demographic predictors, fathers with an education beyond high school were over 5 times more likely to complete Dad2K program compared to fathers with a high school education or less. Qualitative analyses revealed that interviewed father completers were motivated to enroll and participate in a fathering program because of an interest to learn and obtain skills to make them a better parent. Fathers with a high school education or less may require additional engagement strategies to help proactively encourage their enrollment and completion of parent training programs.

Insomnia and Its Temporal Association with Academic Performance among University Students: A Cross-Sectional Study

PubMed Central

Alemu, Sisay Mulugeta

2017-01-01

Introduction Studies show that 9.4% to 38.2% of university students are suffering from insomnia. However, research data in developing countries is limited. Thus, the aim of the study was to assess insomnia and its temporal association with academic performance. Methods and Materials Institution based cross-sectional study was conducted with 388 students at Debre Berhan University. Data were collected at the nine colleges. Logistic and linear regression analysis was performed for modeling insomnia and academic performance with a p value threshold of 0.05, respectively. Data were entered using EPI-data version 3.1 and analyzed using SPSS version 20. Results The prevalence of insomnia was 61.6%. Field of study (p value = 0.01), worshiping frequency (p value = 0.048), marital status (p value = 0.03), and common mental disorder (p value < 0.001) were identified associated factors of insomnia. There was no significant association between insomnia and academic performance (p value = 0.53, β = −0.04). Insomnia explained 1.2% (r2 = 0.012) of the difference in academic performance between students. Conclusions Nearly 3 out of 5 students had insomnia. We recommended that universities would endorse sleep quality and mental health illness screening programs for students. PMID:28752093

Employing online quantum random number generators for generating truly random quantum states in Mathematica

NASA Astrophysics Data System (ADS)

Miszczak, Jarosław Adam

2013-01-01

The presented package for the Mathematica computing system allows the harnessing of quantum random number generators (QRNG) for investigating the statistical properties of quantum states. The described package implements a number of functions for generating random states. The new version of the package adds the ability to use the on-line quantum random number generator service and implements new functions for retrieving lists of random numbers. Thanks to the introduced improvements, the new version provides faster access to high-quality sources of random numbers and can be used in simulations requiring large amount of random data. New version program summaryProgram title: TRQS Catalogue identifier: AEKA_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKA_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 18 134 No. of bytes in distributed program, including test data, etc.: 2 520 49 Distribution format: tar.gz Programming language: Mathematica, C. Computer: Any supporting Mathematica in version 7 or higher. Operating system: Any platform supporting Mathematica; tested with GNU/Linux (32 and 64 bit). RAM: Case-dependent Supplementary material: Fig. 1 mentioned below can be downloaded. Classification: 4.15. External routines: Quantis software library (http://www.idquantique.com/support/quantis-trng.html) Catalogue identifier of previous version: AEKA_v1_0 Journal reference of previous version: Comput. Phys. Comm. 183(2012)118 Does the new version supersede the previous version?: Yes Nature of problem: Generation of random density matrices and utilization of high-quality random numbers for the purpose of computer simulation. Solution method: Use of a physical quantum random number generator and an on-line service providing access to the source of true random numbers generated by quantum real number generator. Reasons for new version: Added support for the high-speed on-line quantum random number generator and improved methods for retrieving lists of random numbers. Summary of revisions: The presented version provides two signicant improvements. The first one is the ability to use the on-line Quantum Random Number Generation service developed by PicoQuant GmbH and the Nano-Optics groups at the Department of Physics of Humboldt University. The on-line service supported in the version 2.0 of the TRQS package provides faster access to true randomness sources constructed using the laws of quantum physics. The service is freely available at https://qrng.physik.hu-berlin.de/. The use of this service allows using the presented package with the need of a physical quantum random number generator. The second improvement introduced in this version is the ability to retrieve arrays of random data directly for the used source. This increases the speed of the random number generation, especially in the case of an on-line service, where it reduces the time necessary to establish the connection. Thanks to the speed improvement of the presented version, the package can now be used in simulations requiring larger amounts of random data. Moreover, the functions for generating random numbers provided by the current version of the package more closely follow the pattern of functions for generating pseudo- random numbers provided in Mathematica. Additional comments: Speed comparison: The implementation of the support for the QRNG on-line service provides a noticeable improvement in the speed of random number generation. For the samples of real numbers of size 101; 102,…,107 the times required to generate these samples using Quantis USB device and QRNG service are compared in Fig. 1. The presented results show that the use of the on-line service provides faster access to random numbers. One should note, however, that the speed gain can increase or decrease depending on the connection speed between the computer and the server providing random numbers. Running time: Depends on the used source of randomness and the amount of random data used in the experiment. References: [1] M. Wahl, M. Leifgen, M. Berlin, T. Röhlicke, H.-J. Rahn, O. Benson., An ultrafast quantum random number generator with provably bounded output bias based on photon arrival time measurements, Applied Physics Letters, Vol. 098, 171105 (2011). http://dx.doi.org/10.1063/1.3578456.

ISICS2008: An expanded version of ISICS for calculating K-, L-, and M-shell cross sections from PWBA and ECPSSR theory

NASA Astrophysics Data System (ADS)

Cipolla, Sam J.

2009-09-01

New version program summaryProgram title: ISICS2008 Catalogue identifier: ADDS_v4_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADDS_v4_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 5420 No. of bytes in distributed program, including test data, etc.: 107 669 Distribution format: tar.gz Programming language: C Computer: 80 486 or higher level PCs Operating system: Windows XP and all earlier operating systems Classification: 16.7 Catalogue identifier of previous version: ADDS_v3_0 Journal reference of previous version: Comput. Phys. Comm. 179 (2008) 616 Does the new version supersede the previous version?: Yes Nature of problem: Ionization and X-ray production cross section calculations for ion-atom collisions. Solution method: Numerical integration of form factor using a logarithmic transform and Gaussian quadrature, plus exact integration limits. Reasons for new version: Addition of relativistic treatment of both projectile and K-shell electrons. Summary of revisions: A new addition to ISICS is the option (R) to calculate ECPSSR cross sections that account for the relativistic treatment of both projectile and K-shell electron, as proposed recently by Lapicki [1], accordingly as σKRECPSSR=Cṡ(1+0.07(()ṡσ(√{(mKRυ1R)}/Z,ςθ), where υ1R is the relativistic projectile velocity. The option can also be invoked in calculating ECPSShsR, where hsR stands for the Hartree-Slater description of the K-shell electron, which was already incorporated into ISICS2006 [2,3], and is now expressed in this option as, σKRECPSShsR=CṡhsR((2υ1R)/(Zςθ),Z/137)ṡ(1+0.07(()ṡσ(υ1R/Z,ςθ) using the function hsR that is already incorporated into ISICS2006. It should be noted that these expressions are corrected versions [4] from the ones published in Ref. [1]. In this new version, ISICS2008, the option line in the main menu that read "Use Relativistic Proj. velocity" has been replaced by "R option for K-shell … Uses Rel. Proj. vel.". As before, various combinations of options can be utilized and each is denoted in the output. Restrictions: The consumed CPU time increases with the atomic shell (K,L,M), but execution is still very fast. Additional comments: A revised User Manual is included in the distribution file. Running time: This depends on which shell and the number of different energies to be used in the calculation. The running time is not significantly changed from the previous version. As before, to calculate K-shell cross sections for protons striking carbon for 19 different proton energies it took less than 10 s; to calculate M-shell cross sections for protons on gold for 21 proton energies it took 4.2 min. References:G. Lapicki, J. Phys. B: At. Mol. Op. Phys. 41 (2008) 115201. S. Cipolla, Comput. Phys. Comm. 176 (2007) 157. S. Cipolla, Nucl. Instrum. Methods Phys. Res. B 261 (2007) 142. G. Lapicki, private communication.

The pEst version 2.1 user's manual

NASA Technical Reports Server (NTRS)

Murray, James E.; Maine, Richard E.

1987-01-01

This report is a user's manual for version 2.1 of pEst, a FORTRAN 77 computer program for interactive parameter estimation in nonlinear dynamic systems. The pEst program allows the user complete generality in definig the nonlinear equations of motion used in the analysis. The equations of motion are specified by a set of FORTRAN subroutines; a set of routines for a general aircraft model is supplied with the program and is described in the report. The report also briefly discusses the scope of the parameter estimation problem the program addresses. The report gives detailed explanations of the purpose and usage of all available program commands and a description of the computational algorithms used in the program.

Digital Control of the Czochralski Growth of Gallium Arsenide. System Reference Manual. Valid for Czochralski Growth Controller Software Version 2.4

DTIC Science & Technology

1988-01-04

Controller Routine .......... ........................ 405 -viii- ’ O, ...1 . • N SList of Illustrations i p List of Illustrations . Fig. 1: A...J------ - - - 6 - -- -w -- -w -r n . w ~ - P a CGCS Program Versions ~CGCS Program Versions This section describes the "evolution" of the...8217 ~- 134 - ,d" - 1’ , n "W , ’." " a 4 r P . ’ ,’ r t r 1 "."." , . L t * 5.1 CGCS Concept and Structure 5. The Czochralski Growth Control System Software

The Effect of Chair Yoga on Biopsychosocial Changes in English- and Spanish-Speaking Community-Dwelling Older Adults with Lower-Extremity Osteoarthritis.

PubMed

Park, Juyoung; Newman, David; McCaffrey, Ruth; Garrido, Jacinto J; Riccio, Mary Lou; Liehr, Patricia

Chair yoga (CY), a mind-body therapy, is a safe nonpharmacological approach for managing osteoarthritis (OA) in older adults who cannot participate in standing exercise. However, there is no linguistically tailored CY program for those with limited English proficiency (LEP). This 2-arm randomized controlled trial compared the effects of a linguistically tailored yoga program (English and Spanish versions) on the outcomes of pain, physical function, and psychosocial factors compared to the effects of a linguistically tailored Health Education Program (HEP; English and Spanish versions). Participants with lower-extremity OA, recruited from 2 community sites, completed the Spanish (n = 40) or English (n = 60) version of twice-weekly 45-min CY or HEP sessions for 8 weeks. Data were collected at baseline, 4 weeks, 8 weeks, and 1- and 3-month follow-ups. English and Spanish CY groups (but neither HEP language group) showed significant decreases in pain interference. Measures of OA symptoms, balance, depression, and social activities were not significantly different between English and Spanish versions of CY and English and Spanish versions of HEP. It was concluded that the Spanish and English versions of CY and HEP were equivalent. Linguistically tailored CY could be implemented in aging-serving communities for persons with LEP.

Augmentation of Teaching Tools: Outsourcing the HSD Computing for SPSS Application

ERIC Educational Resources Information Center

Wang, Jianjun

2010-01-01

The widely-used Tukey's HSD index is not produced in the current version of SPSS (i.e., PASW Statistics, version 18), and a computer program named "HSD Calculator" has been chosen to amend this problem. In comparison to hand calculation, this program application does not require table checking, which eliminates potential concern on the size of a…

Automated Test Assembly Using lp_Solve Version 5.5 in R

ERIC Educational Resources Information Center

Diao, Qi; van der Linden, Wim J.

2011-01-01

This article reviews the use of the software program lp_solve version 5.5 for solving mixed-integer automated test assembly (ATA) problems. The program is freely available under Lesser General Public License 2 (LGPL2). It can be called from the statistical language R using the lpSolveAPI interface. Three empirical problems are presented to…

An Alternative to QUERY: Batch-Searching of the ERIC Information Collections.

ERIC Educational Resources Information Center

Krahmer, Edward; Horne, Kent

A manual describing the RIC computer search program for retrieval of information from ERIC, CIJE, and other collections is presented. It is pointed out that two versions of this program have been developed. The first is for an IBM 360/370 computer. This version has been operational on a production basis for nearly a year. Four installations of…

PVAST Propeller Vibration and Strength Analysis Program Version 7.3 User’s Manual

DTIC Science & Technology

2001-03-01

Copy No: ___ _ PVAST Propeller Vibration and Strength Analysis Program Version 7.3 User’s Manual Koko ,T S, Palmeter, M F, Chernuka, M.W. MARTEC...34St name, rruddle mittal If rruhtary, show rank, e g. Doe, Maj. John E.) Koko ,T.S., Palmeter, M.F., Chernuka, M.W. DATE OF PUBLICATION (month and

DFMSPH14: A C-code for the double folding interaction potential of two spherical nuclei

NASA Astrophysics Data System (ADS)

Gontchar, I. I.; Chushnyakova, M. V.

2016-09-01

This is a new version of the DFMSPH code designed to obtain the nucleus-nucleus potential by using the double folding model (DFM) and in particular to find the Coulomb barrier. The new version uses the charge, proton, and neutron density distributions provided by the user. Also we added an option for fitting the DFM potential by the Gross-Kalinowski profile. The main functionalities of the original code (e.g. the nucleus-nucleus potential as a function of the distance between the centers of mass of colliding nuclei, the Coulomb barrier characteristics, etc.) have not been modified. Catalog identifier: AEFH_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEFH_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland. Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 7211 No. of bytes in distributed program, including test data, etc.: 114404 Distribution format: tar.gz Programming language: C Computer: PC and Mac Operation system: Windows XP and higher, MacOS, Unix/Linux Memory required to execute with typical data: below 10 Mbyte Classification: 17.9 Catalog identifier of previous version: AEFH_v1_0 Journal reference of previous version: Comp. Phys. Comm. 181 (2010) 168 Does the new version supersede the previous version?: Yes Nature of physical problem: The code calculates in a semimicroscopic way the bare interaction potential between two colliding spherical nuclei as a function of the center of mass distance. The height and the position of the Coulomb barrier are found. The calculated potential is approximated by an analytical profile (Woods-Saxon or Gross-Kalinowski) near the barrier. Dependence of the barrier parameters upon the characteristics of the effective NN forces (like, e.g. the range of the exchange part of the nuclear term) can be investigated. Method of solution: The nucleus-nucleus potential is calculated using the double folding model with the Coulomb and the effective M3Y NN interactions. For the direct parts of the Coulomb and the nuclear terms, the Fourier transform method is used. In order to calculate the exchange parts, the density matrix expansion method is applied. Typical running time: less than 1 minute. Reason for new version: Many users asked us how to implement their own density distributions in the DFMSPH. Now this option has been added. Also we found that the calculated Double-Folding Potential (DFP) is approximated more accurately by the Gross-Kalinowski (GK) profile. This option has been also added.

SMMP v. 3.0—Simulating proteins and protein interactions in Python and Fortran

NASA Astrophysics Data System (ADS)

Meinke, Jan H.; Mohanty, Sandipan; Eisenmenger, Frank; Hansmann, Ulrich H. E.

2008-03-01

We describe a revised and updated version of the program package SMMP. SMMP is an open-source FORTRAN package for molecular simulation of proteins within the standard geometry model. It is designed as a simple and inexpensive tool for researchers and students to become familiar with protein simulation techniques. SMMP 3.0 sports a revised API increasing its flexibility, an implementation of the Lund force field, multi-molecule simulations, a parallel implementation of the energy function, Python bindings, and more. Program summaryTitle of program:SMMP Catalogue identifier:ADOJ_v3_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADOJ_v3_0.html Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Licensing provisions:Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html Programming language used:FORTRAN, Python No. of lines in distributed program, including test data, etc.:52 105 No. of bytes in distributed program, including test data, etc.:599 150 Distribution format:tar.gz Computer:Platform independent Operating system:OS independent RAM:2 Mbytes Classification:3 Does the new version supersede the previous version?:Yes Nature of problem:Molecular mechanics computations and Monte Carlo simulation of proteins. Solution method:Utilizes ECEPP2/3, FLEX, and Lund potentials. Includes Monte Carlo simulation algorithms for canonical, as well as for generalized ensembles. Reasons for new version:API changes and increased functionality. Summary of revisions:Added Lund potential; parameters used in subroutines are now passed as arguments; multi-molecule simulations; parallelized energy calculation for ECEPP; Python bindings. Restrictions:The consumed CPU time increases with the size of protein molecule. Running time:Depends on the size of the simulated molecule.

Assessment of radionuclide databases in CAP88 mainframe version 1.0 and Windows-based version 3.0.

PubMed

LaBone, Elizabeth D; Farfán, Eduardo B; Lee, Patricia L; Jannik, G Timothy; Donnelly, Elizabeth H; Foley, Trevor Q

2009-09-01

In this study the radionuclide databases for two versions of the Clean Air Act Assessment Package-1988 (CAP88) computer model were assessed in detail. CAP88 estimates radiation dose and the risk of health effects to human populations from radionuclide emissions to air. This program is used by several U.S. Department of Energy (DOE) facilities to comply with National Emission Standards for Hazardous Air Pollutants regulations. CAP88 Mainframe, referred to as version 1.0 on the U.S. Environmental Protection Agency Web site (http://www.epa.gov/radiation/assessment/CAP88/), was the very first CAP88 version released in 1988. Some DOE facilities including the Savannah River Site still employ this version (1.0) while others use the more user-friendly personal computer Windows-based version 3.0 released in December 2007. Version 1.0 uses the program RADRISK based on International Commission on Radiological Protection Publication 30 as its radionuclide database. Version 3.0 uses half-life, dose, and risk factor values based on Federal Guidance Report 13. Differences in these values could cause different results for the same input exposure data (same scenario), depending on which version of CAP88 is used. Consequently, the differences between the two versions are being assessed in detail at Savannah River National Laboratory. The version 1.0 and 3.0 database files contain 496 and 838 radionuclides, respectively, and though one would expect the newer version to include all the 496 radionuclides, 35 radionuclides are listed in version 1.0 that are not included in version 3.0. The majority of these has either extremely short or long half-lives or is no longer in production; however, some of the short-lived radionuclides might produce progeny of great interest at DOE sites. In addition, 122 radionuclides were found to have different half-lives in the two versions, with 21 over 3 percent different and 12 over 10 percent different.

Glenoid version and size: does gender, ethnicity, or body size play a role?

PubMed

Piponov, Hristo Ivanov; Savin, David; Shah, Neal; Esposito, Domenic; Schwartz, Brian; Moretti, Vincent; Goldberg, Benjamin

2016-11-01

Variations in glenoid morphology among patients of different gender, body habitus, and ethnicity have been of interest for surgeons. Understanding these anatomical variations is a critical step in restoring normal glenohumeral structure during shoulder reconstruction surgery. Retrospective review of 108 patient shoulder CT scans was performed and glenoid version, AP diameter and height were measured. Statistical multiple regression models were used to investigate the ability of gender and ethnicity to predict glenoid AP diameter, height, and version independently of patient weight and height. The mean glenoid AP diameter was 24.7 ± 3.5, the mean glenoid height was 31.7 ± 3.7, and the mean glenoid version was 0.05 ± 9.05. According to our regression models, males would be expected to exhibit 8.4° more glenoid retroversion than females (p = 0.003) and have 2.9 mm larger glenoid height compared to females (p = 0.002). The predicted male glenoid AP diameter was 3.4 mm higher than that in females (p < 0.001). Hispanics demonstrated 6.4° more glenoid anteversion compared to African-Americans (p = 0.04). Asians exhibited 4.1 mm smaller glenoid AP diameters than African-Americans (p = 0.002). An increase of 25 kg in patient weight resulted in 1 mm increase in AP diameter (p = 0.01). Gender is the strongest independent predictor of glenoid size and version. Males exhibited a larger size and more retroverted glenoid. Patient height was found to be predictive of glenoid size only in patients of the same gender. Although variations in glenoid size and version are observed among ethnicities, larger sample size ethnic groups will be necessary to explore the precise relations. Surgeons should consider gender and ethnic variations in the pre-operative planning and surgical restoration of the native glenohumeral relationship. Anatomic Study.

A finite difference Hartree-Fock program for atoms and diatomic molecules

NASA Astrophysics Data System (ADS)

Kobus, Jacek

2013-03-01

The newest version of the two-dimensional finite difference Hartree-Fock program for atoms and diatomic molecules is presented. This is an updated and extended version of the program published in this journal in 1996. It can be used to obtain reference, Hartree-Fock limit values of total energies and multipole moments for a wide range of diatomic molecules and their ions in order to calibrate existing and develop new basis sets, calculate (hyper)polarizabilities (αzz, βzzz, γzzzz, Az,zz, Bzz,zz) of atoms, homonuclear and heteronuclear diatomic molecules and their ions via the finite field method, perform DFT-type calculations using LDA or B88 exchange functionals and LYP or VWN correlations ones or the self-consistent multiplicative constant method, perform one-particle calculations with (smooth) Coulomb and Krammers-Henneberger potentials and take account of finite nucleus models. The program is easy to install and compile (tarball+configure+make) and can be used to perform calculations within double- or quadruple-precision arithmetic. Catalogue identifier: ADEB_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADEB_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License version 2 No. of lines in distributed program, including test data, etc.: 171196 No. of bytes in distributed program, including test data, etc.: 9481802 Distribution format: tar.gz Programming language: Fortran 77, C. Computer: any 32- or 64-bit platform. Operating system: Unix/Linux. RAM: Case dependent, from few MB to many GB Classification: 16.1. Catalogue identifier of previous version: ADEB_v1_0 Journal reference of previous version: Comput. Phys. Comm. 98(1996)346 Does the new version supersede the previous version?: Yes Nature of problem: The program finds virtually exact solutions of the Hartree-Fock and density functional theory type equations for atoms, diatomic molecules and their ions. The lowest energy eigenstates of a given irreducible representation and spin can be obtained. The program can be used to perform one-particle calculations with (smooth) Coulomb and Krammers-Henneberger potentials and also DFT-type calculations using LDA or B88 exchange functionals and LYP or VWN correlations ones or the self-consistent multiplicative constant method. Solution method: Single-particle two-dimensional numerical functions (orbitals) are used to construct an antisymmetric many-electron wave function of the restricted open-shell Hartree-Fock model. The orbitals are obtained by solving the Hartree-Fock equations as coupled two-dimensional second-order (elliptic) partial differential equations (PDEs). The Coulomb and exchange potentials are obtained as solutions of the corresponding Poisson equations. The PDEs are discretized by the eighth-order central difference stencil on a two-dimensional single grid, and the resulting large and sparse system of linear equations is solved by the (multicolour) successive overrelaxation ((MC)SOR) method. The self-consistent-field iterations are interwoven with the (MC)SOR ones and orbital energies and normalization factors are used to monitor the convergence. The accuracy of solutions depends mainly on the grid and the system under consideration, which means that within double precision arithmetic one can obtain orbitals and energies having up to 12 significant figures. If more accurate results are needed, quadruple-precision floating-point arithmetic can be used. Reasons for new version: Additional features, many modifications and corrections, improved convergence rate, overhauled code and documentation. Summary of revisions: see ChangeLog found in tar.gz archive Restrictions: The present version of the program is restricted to 60 orbitals. The maximum grid size is determined at compilation time. Unusual features: The program uses two C routines for allocating and deallocating memory. Several BLAS (Basic Linear Algebra System) routines are emulated by the program. When possible they should be replaced by their library equivalents. Additional comments: automake and autoconf tools are required to build and compile the program; checked with f77, gfortran and ifort compilers Running time: Very case dependent - from a few CPU seconds for the H2 defined on a small grid up to several weeks for the Hartree-Fock-limit calculations for 40-50 electron molecules.

User guide for MODPATH Version 7—A particle-tracking model for MODFLOW

USGS Publications Warehouse

Pollock, David W.

2016-09-26

MODPATH is a particle-tracking post-processing program designed to work with MODFLOW, the U.S. Geological Survey (USGS) finite-difference groundwater flow model. MODPATH version 7 is the fourth major release since its original publication. Previous versions were documented in USGS Open-File Reports 89–381 and 94–464 and in USGS Techniques and Methods 6–A41.MODPATH version 7 works with MODFLOW-2005 and MODFLOW–USG. Support for unstructured grids in MODFLOW–USG is limited to smoothed, rectangular-based quadtree and quadpatch grids.A software distribution package containing the computer program and supporting documentation, such as input instructions, output file descriptions, and example problems, is available from the USGS over the Internet (http://water.usgs.gov/ogw/modpath/).

SMP: A solid modeling program version 2.0

NASA Technical Reports Server (NTRS)

Randall, D. P.; Jones, K. H.; Vonofenheim, W. H.; Gates, R. L.; Matthews, C. G.

1986-01-01

The Solid Modeling Program (SMP) provides the capability to model complex solid objects through the composition of primitive geometric entities. In addition to the construction of solid models, SMP has extensive facilities for model editing, display, and analysis. The geometric model produced by the software system can be output in a format compatible with existing analysis programs such as PATRAN-G. The present version of the SMP software supports six primitives: boxes, cones, spheres, paraboloids, tori, and trusses. The details for creating each of the major primitive types is presented. The analysis capabilities of SMP, including interfaces to existing analysis programs, are discussed.

A program for the Bayesian Neural Network in the ROOT framework

NASA Astrophysics Data System (ADS)

Zhong, Jiahang; Huang, Run-Sheng; Lee, Shih-Chang

2011-12-01

We present a Bayesian Neural Network algorithm implemented in the TMVA package (Hoecker et al., 2007 [1]), within the ROOT framework (Brun and Rademakers, 1997 [2]). Comparing to the conventional utilization of Neural Network as discriminator, this new implementation has more advantages as a non-parametric regression tool, particularly for fitting probabilities. It provides functionalities including cost function selection, complexity control and uncertainty estimation. An example of such application in High Energy Physics is shown. The algorithm is available with ROOT release later than 5.29. Program summaryProgram title: TMVA-BNN Catalogue identifier: AEJX_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEJX_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: BSD license No. of lines in distributed program, including test data, etc.: 5094 No. of bytes in distributed program, including test data, etc.: 1,320,987 Distribution format: tar.gz Programming language: C++ Computer: Any computer system or cluster with C++ compiler and UNIX-like operating system Operating system: Most UNIX/Linux systems. The application programs were thoroughly tested under Fedora and Scientific Linux CERN. Classification: 11.9 External routines: ROOT package version 5.29 or higher ( http://root.cern.ch) Nature of problem: Non-parametric fitting of multivariate distributions Solution method: An implementation of Neural Network following the Bayesian statistical interpretation. Uses Laplace approximation for the Bayesian marginalizations. Provides the functionalities of automatic complexity control and uncertainty estimation. Running time: Time consumption for the training depends substantially on the size of input sample, the NN topology, the number of training iterations, etc. For the example in this manuscript, about 7 min was used on a PC/Linux with 2.0 GHz processors.

Multistage Planetary Power Transmissions

NASA Technical Reports Server (NTRS)

Hadden, G. B.; Dyba, G. J.; Ragen, M. A.; Kleckner, R. J.; Sheynin, L.

1986-01-01

PLANETSYS simulates thermomechanical performance of multistage planetary performance of multistage planetary power transmission. Two versions of code developed, SKF version and NASA version. Major function of program: compute performance characteristics of planet bearing for any of six kinematic inversions. PLANETSYS solves heat-balance equations for either steadystate or transient thermal conditions, and produces temperature maps for mechanical system.

The 1-min Screening Test for Reading Problems in College Students: Psychometric Properties of the 1-min TIL.

PubMed

Fernandes, Tânia; Araújo, Susana; Sucena, Ana; Reis, Alexandra; Castro, São Luís

2017-02-01

Reading is a central cognitive domain, but little research has been devoted to standardized tests for adults. We, thus, examined the psychometric properties of the 1-min version of Teste de Idade de Leitura (Reading Age Test; 1-min TIL), the Portuguese version of Lobrot L3 test, in three experiments with college students: typical readers in Experiment 1A and B, dyslexic readers and chronological age controls in Experiment 2. In Experiment 1A, test-retest reliability and convergent validity were evaluated in 185 students. Reliability was >.70, and phonological decoding underpinned 1-min TIL. In Experiment 1B, internal consistency was assessed by presenting two 45-s versions of the test to 19 students, and performance in these versions was significantly associated (r = .78). In Experiment 2, construct validity, criterion validity and clinical utility of 1-min TIL were investigated. A multiple regression analysis corroborated construct validity; both phonological decoding and listening comprehension were reliable predictors of 1-min TIL scores. Logistic regression and receiver operating characteristics analyses revealed the high accuracy of this test in distinguishing dyslexic from typical readers. Therefore, the 1-min TIL, which assesses reading comprehension and potential reading difficulties in college students, has the necessary psychometric properties to become a useful screening instrument in neuropsychological assessment and research. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Validation of an abbreviated version of the Denver HIV risk score for prediction of HIV infection in an urban ED.

PubMed

Hsieh, Yu-Hsiang; Haukoos, Jason S; Rothman, Richard E

2014-07-01

We sought to evaluate the performance of an abbreviated version of the Denver HIV Risk Score in 2 urban emergency departments (ED) with known high undiagnosed HIV prevalence. We performed a secondary analysis of data collected prospectively between November 2005 and December 2009 as part of an ED-based nontargeted rapid HIV testing program from 2 sites. Demographics; HIV testing history; injection drug use; and select high-risk sexual behaviors, including men who have sex with men, were collected by standardized interview. Information regarding receptive anal intercourse and vaginal intercourse was either not collected or collected inconsistently and was thus omitted from the model to create its abbreviated version. The study cohort included 15184 patients with 114 (0.75%) newly diagnosed with HIV infection. HIV prevalence was 0.41% (95% confidence interval [CI], 0.21%-0.71%) for those with a score less than 20, 0.29% (95% CI, 0.14%-0.52%) for those with a score of 20 to 29, 0.65% (95% CI, 0.48%-0.87%) for those with a score of 30 to 39, 2.38% (95% CI, 1.68%-3.28%) for those with a score of 40 to 49, and 4.57% (95% CI, 2.09%-8.67%) for those with a score of 50 or higher. External validation resulted in good discrimination (area under the receiver operating characteristic curve, 0.75; 95% CI, 0.71-0.79). The calibration regression slope was 0.92 and its R(2) was 0.78. An abbreviated version of the Denver HIV Risk Score had comparable performance to that reported previously, offering a promising alternative strategy for HIV screening in the ED where limited sexual risk behavior information may be obtainable. Copyright © 2014 Elsevier Inc. All rights reserved.

DIRAC: A new version of computer algebra tools for studying the properties and behavior of hydrogen-like ions

NASA Astrophysics Data System (ADS)

McConnell, Sean; Fritzsche, Stephan; Surzhykov, Andrey

2010-03-01

During recent years, the DIRAC package has proved to be an efficient tool for studying the structural properties and dynamic behavior of hydrogen-like ions. Originally designed as a set of MAPLE procedures, this package provides interactive access to the wave and Green's functions in the non-relativistic and relativistic frameworks and supports analytical evaluation of a large number of radial integrals that are required for the construction of transition amplitudes and interaction cross sections. We provide here a new version of the DIRAC program which is developed within the framework of MATHEMATICA (version 6.0). This new version aims to cater to a wider community of researchers that use the MATHEMATICA platform and to take advantage of the generally faster processing times therein. Moreover, the addition of new procedures, a more convenient and detailed help system, as well as source code revisions to overcome identified shortcomings should ensure expanded use of the new DIRAC program over its predecessor. New version program summaryProgram title: DIRAC Catalogue identifier: ADUQ_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADUQ_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC license, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 45 073 No. of bytes in distributed program, including test data, etc.: 285 828 Distribution format: tar.gz Programming language: Mathematica 6.0 or higher Computer: All computers with a license for the computer algebra package Mathematica (version 6.0 or higher) Operating system: Mathematica is O/S independent Classification: 2.1 Catalogue identifier of previous version: ADUQ_v1_0 Journal reference of previous version: Comput. Phys. Comm. 165 (2005) 139 Does the new version supersede the previous version?: Yes Nature of problem: Since the early days of quantum mechanics, the "hydrogen atom" has served as one of the key models for studying the structure and dynamics of various quantum systems. Its analytic solutions are frequently used in case studies in atomic and molecular physics, quantum optics, plasma physics, or even in the field of quantum information and computation. Fast and reliable access to functions and properties of the hydrogenic systems are frequently required, in both the non-relativistic and relativistic frameworks. Despite all the knowledge about one-electron ions, providing such an access is not a simple task, owing to the rather complicated mathematical structure of the Schrödinger and especially Dirac equations. Moreover, for analyzing experimental results as well as for performing advanced theoretical studies one often needs (apart from the detailed information on atomic wave- and Green's functions) to be able to calculate a number of integrals involving these functions. Although for many types of transition operators these integrals can be evaluated analytically in terms of special mathematical functions, such an evaluation is usually rather involved and prone to mistakes. Solution method: A set of Mathematica procedures is developed which provides both the non-relativistic and relativistic solutions of the "Hydrogen atom model". It facilitates, moreover, the symbolic evaluation of integrals involved in the calculations of cross sections and transition amplitudes. These procedures are based on a large number of relations among special mathematical functions, information about their integral representations, recurrence formulae and series expansions. Based on this knowledge, the DIRAC tools provide a fast and reliable algebraic (and if necessary, numeric) manipulation of functions and properties of one-electron systems, thus helping to obtain further insight into the behavior of quantum physical systems. Reasons for new version: The original version of the DIRAC program was developed as a toolbox of Maple procedures and was submitted to the CPC library in 2004 (cf. Ref. [1]). Since then DIRAC has found its niche in advanced theoretical studies carried out in realm of heavy ion physics. With the help of this program detailed analysis has been performed, in particular, for the various excitation and ionization processes occurring in relativistic ion-atom collisions [2], the polarization of the characteristic X-ray radiation following radiative electron capture [3], the correlation properties of the two-photon emission from few-electron heavy ions [4], the spin entanglement phenomena in atomic photoionization [5] and even for exploring the vibrational excitations of the heavy nuclei [6]. Although these studies have conclusively proven the potential of the program, they have also illuminated routes for its further enhancement. Apart from certain source code revisions, demand has grown for a new version of DIRAC compatible with the Mathematica platform. The version presented here includes a wider ranging and more user friendly interactive help system, a number of new procedures and reprogramming for greater computational efficiency. Summary of revisions: The most important new capabilities of the DIRAC program since the previous version are: The utilization of the Mathematica (version 6.0) platform. The addition of a number of new procedures. Since the complete list of the new (and updated) procedures can be found in the interactive help library of the program, we mention here only the most important ones: DiracGlobal[] - Displays a list of the current global settings which specify the framework, nuclear charge and the units which are to be used by the DIRAC program. DiracRadialOrbitalMomentum[] - Returns a non-relativistic radial orbital in momentum space for both, the bound and free electron states. DiracSlaterRadial[] - Evaluates the radial Slater integral both, with the non-relativistic and relativistic wavefunctions. In the previous version of the program this procedure was restricted to the non-relativistic framework only. DiracGreensIntegralRadial[] - Evaluates the two-dimensional radial integrals with the wave- and Green's functions both in non-relativistic and relativistic frameworks. DiracAngularMatrixElement[] - Calculates the angular matrix elements for various irreducible tensor operators. The elimination of some redundant procedures. In particular, the previous version supported evaluation of the spherical Bessel functions, Wigner 3j symbols, Clebsch-Gordan coefficients and spherical harmonics functions. These tools are now superseded by in-built procedures of Mathematica. The development of a full featured interactive help system which follows the style of the Mathematica Help Pages. Extensive revision of the source code in order to correct a number of bugs and inconsistencies that have been identified during use of the previous version of Dirac. The DIRAC package is distributed as a compressed tar file from which the DIRAC root directory can be (re-)generated. The root directory contains the source code and help libraries, a "Readme" file, Dirac_Installation_Instructions, as well as the notebook DemonstrationNotebook.nb that includes a number of test cases to illustrate the use of the program. These test cases, which concern the theoretical analysis of wavefunctions and the fine-structure of hydrogen-like ions, has already been discussed in detail in Ref. [1] and are provided here in order to underline the continuity between the previous (Maple) and new (Mathematica) versions of the DIRAC program. Unusual features: Even though all basic features of the previous Maple version have been retained in as close to the original form as possible, some small syntax changes became necessary in the new version of DIRAC in order to follow Mathematica standards. First of all, these changes concern naming conventions for DIRAC's procedures. As was discussed in Ref. [1], previously rather long names were employed in which each word was separated by an underscore. For example, when running the Maple version of the program one had to call the procedure Dirac_Slater_radial() in order to evaluate the Slater integral. Such a naming convention however, cannot be used in the Mathematica framework where the underscore character is reserved to represent Blank, a built-in symbol. In the new version of DIRAC we therefore follow the Mathematica convention of delimiting each word in a procedure's name by capitalization. Evaluation of the Slater determinant can be accomplished now simply by entering DiracSlaterRadial[]. Besides procedure names, a new convention is introduced to represent fundamental physical constants. In this version of DIRAC the group of (preset) global variables has changed to resemble their conventional symbols, specifically α, a, e, m, c and ℏ, being the fine structure constant, Bohr radius, electron charge, electron mass, speed of light and the Planck constant respectively. If the numerical evaluator N is wrapped around any of these constants, their numerical values are returned. Running time: Although the program replies promptly upon most requests, the running time also depends on the particular task. For example, computation of (radial) matrix elements involving components of relativistic wavefunctions might require a few seconds of a runtime. A number of test calculations performed regarding this and other tasks clearly indicate that the new version of Dirac requires up to 90% less evaluation time compared to its predecessor. References:A. Surzhykov, P. Koval, S. Fritzsche, Comput. Phys. Comm. 165 (2005) 139. H. Ogawa, et al., Phys. Rev. A 75 (2007) 1. A.V. Maiorova, et al., J. Phys. B: At. Mol. Opt. Phys. 42 (2009) 125003. L. Borowska, A. Surzhykov, Th. Stöhlker, S. Fritzsche, Phys. Rev. A 74 (2006) 062516. T. Radtke, S. Fritzsche, A. Surzhykov, Phys. Rev. A 74 (2006) 032709. A. Pálffy, Z. Harman, A. Surzhykov, U.D. Jentschura, Phys. Rev. A 75 (2007) 012712.

GR@PPA 2.8: Initial-state jet matching for weak-boson production processes at hadron collisions

NASA Astrophysics Data System (ADS)

Odaka, Shigeru; Kurihara, Yoshimasa

2012-04-01

The initial-state jet matching method introduced in our previous studies has been applied to the event generation of single W and Z production processes and diboson (WW, WZ and ZZ) production processes at hadron collisions in the framework of the GR@PPA event generator. The generated events reproduce the transverse momentum spectra of weak bosons continuously in the entire kinematical region. The matrix elements (ME) for hard interactions are still at the tree level. As in previous versions, the decays of weak bosons are included in the matrix elements. Therefore, spin correlations and phase-space effects in the decay of weak bosons are exact at the tree level. The program package includes custom-made parton shower programs as well as ME-based hard interaction generators in order to achieve self-consistent jet matching. The generated events can be passed to general-purpose event generators to make the simulation proceed down to the hadron level. Catalogue identifier: ADRH_v3_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADRH_v3_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 112 146 No. of bytes in distributed program, including test data, etc.: 596 667 Distribution format: tar.gz Programming language: Fortran; with some included libraries coded in C and C++ Computer: All Operating system: Any UNIX-like system RAM: 1.6 Mega bytes at minimum Classification: 11.2 Catalogue identifier of previous version: ADRH_v2_0 Journal reference of previous version: Comput. Phys. Comm. 175 (2006) 665 External routines: Bash and Perl for the setup, and CERNLIB, ROOT, LHAPDF, PYTHIA according to the user's choice. Does the new version supersede the previous version?: No, this version supports only a part of the processes included in the previous versions. Nature of problem: We need to combine those processes including 0 jet and 1 jet in the matrix elements using an appropriate matching method, in order to simulate weak-boson production processes in the entire kinematical region. Solution method: The leading logarithmic components to be included in parton distribution functions and parton showers are subtracted from 1-jet matrix elements. Custom-made parton shower programs are provided to ensure satisfactory performance of the matching method. Reasons for new version: An initial-state jet matching method has been implemented. Summary of revisions: Weak-boson production processes associated with 0 jet and 1 jet can be consistently merged using the matching method. Restrictions: The built-in parton showers are not compatible with the PYTHIA new PS and the HERWIG PS. Unusual features: A large number of particles may be produced by the parton showers and passed to general-purpose event generators. Running time: About 10 min for initialization plus 25 s for every 1k-event generation for W production in the LHC condition, on a 3.0-GHz Intel Xeon processor with the default setting.

Accounting for center in the Early External Cephalic Version trials: an empirical comparison of statistical methods to adjust for center in a multicenter trial with binary outcomes.

PubMed

Reitsma, Angela; Chu, Rong; Thorpe, Julia; McDonald, Sarah; Thabane, Lehana; Hutton, Eileen

2014-09-26

Clustering of outcomes at centers involved in multicenter trials is a type of center effect. The Consolidated Standards of Reporting Trials Statement recommends that multicenter randomized controlled trials (RCTs) should account for center effects in their analysis, however most do not. The Early External Cephalic Version (EECV) trials published in 2003 and 2011 stratified by center at randomization, but did not account for center in the analyses, and due to the nature of the intervention and number of centers, may have been prone to center effects. Using data from the EECV trials, we undertook an empirical study to compare various statistical approaches to account for center effect while estimating the impact of external cephalic version timing (early or delayed) on the outcomes of cesarean section, preterm birth, and non-cephalic presentation at the time of birth. The data from the EECV pilot trial and the EECV2 trial were merged into one dataset. Fisher's exact method was used to test the overall effect of external cephalic version timing unadjusted for center effects. Seven statistical models that accounted for center effects were applied to the data. The models included: i) the Mantel-Haenszel test, ii) logistic regression with fixed center effect and fixed treatment effect, iii) center-size weighted and iv) un-weighted logistic regression with fixed center effect and fixed treatment-by-center interaction, iv) logistic regression with random center effect and fixed treatment effect, v) logistic regression with random center effect and random treatment-by-center interaction, and vi) generalized estimating equations. For each of the three outcomes of interest approaches to account for center effect did not alter the overall findings of the trial. The results were similar for the majority of the methods used to adjust for center, illustrating the robustness of the findings. Despite literature that suggests center effect can change the estimate of effect in multicenter trials, this empirical study does not show a difference in the outcomes of the EECV trials when accounting for center effect. The EECV2 trial was registered on 30 July 30 2005 with Current Controlled Trials: ISRCTN 56498577.

MC-TESTER v. 1.23: A universal tool for comparisons of Monte Carlo predictions for particle decays in high energy physics

NASA Astrophysics Data System (ADS)

Davidson, N.; Golonka, P.; Przedziński, T.; Waş, Z.

2011-03-01

Theoretical predictions in high energy physics are routinely provided in the form of Monte Carlo generators. Comparisons of predictions from different programs and/or different initialization set-ups are often necessary. MC-TESTER can be used for such tests of decays of intermediate states (particles or resonances) in a semi-automated way. Since 2002 new functionalities were introduced into the package. In particular, it now works with the HepMC event record, the standard for C++ programs. The complete set-up for benchmarking the interfaces, such as interface between τ-lepton production and decay, including QED bremsstrahlung effects is shown. The example is chosen to illustrate the new options introduced into the program. From the technical perspective, our paper documents software updates and supplements previous documentation. As in the past, our test consists of two steps. Distinct Monte Carlo programs are run separately; events with decays of a chosen particle are searched, and information is stored by MC-TESTER. Then, at the analysis step, information from a pair of runs may be compared and represented in the form of tables and plots. Updates introduced in the program up to version 1.24.4 are also documented. In particular, new configuration scripts or script to combine results from multitude of runs into single information file to be used in analysis step are explained. Program summaryProgram title: MC-TESTER, version 1.23 and version 1.24.4 Catalog identifier: ADSM_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADSM_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 250 548 No. of bytes in distributed program, including test data, etc.: 4 290 610 Distribution format: tar.gz Programming language: C++, FORTRAN77 Tested and compiled with: gcc 3.4.6, 4.2.4 and 4.3.2 with g77/gfortran Computer: Tested on various platforms Operating system: Tested on operating systems: Linux SLC 4.6 and SLC 5, Fedora 8, Ubuntu 8.2 etc. Classification: 11.9 External routines: HepMC ( https://savannah.cern.ch/projects/hepmc/), PYTHIA8 ( http://home.thep.lu.se/~torbjorn/Pythia.html), LaTeX ( http://www.latex-project.org/) Catalog identifier of previous version: ADSM_v1_0 Journal reference of previous version: Comput. Phys. Comm. 157 (2004) 39 Does the new version supersede the previous version?: Yes Nature of problem: The decays of individual particles are well defined modules of a typical Monte Carlo program chain in high energy physics. A fast, semi-automatic way of comparing results from different programs is often desirable for the development of new programs, in order to check correctness of the installations or for discussion of uncertainties. Solution method: A typical HEP Monte Carlo program stores the generated events in event records such as HepMC, HEPEVT or PYJETS. MC-TESTER scans, event by event, the contents of the record and searches for the decays of the particle under study. The list of the found decay modes is successively incremented and histograms of all invariant masses which can be calculated from the momenta of the particle decay products are defined and filled. The outputs from the two runs of distinct programs can be later compared. A booklet of comparisons is created: for every decay channel, all histograms present in the two outputs are plotted and parameter quantifying shape difference is calculated. Its maximum over every decay channel is printed in the summary table. Reasons for new version: Interface for HepMC Event Record is introduced. Setup for benchmarking the interfaces, such as τ-lepton production and decay, including QED bremsstrahlung effects is introduced as well. This required significant changes in the algorithm. As a consequence, a new version of the code was introduced. Restrictions: Only the first 200 decay channels that were found will initialize histograms and if the multiplicity of decay products in a given channel was larger than 7, histograms will not be created for that channel. Additional comments: New features: HepMC interface, use of lists in definition of histograms and decay channels, filters for decay products or secondary decays to be omitted, bug fixing, extended flexibility in representation of program output, installation configuration scripts, merging multiple output files from separate generations. Running time: Varies substantially with the analyzed decay particle, but generally speed estimation of the old version remains valid. On a PC/Linux with 2.0 GHz processors MC-TESTER increases the run time of the τ-lepton Monte Carlo program TAUOLA by 4.0 seconds for every 100 000 analyzed events (generation itself takes 26 seconds). The analysis step takes 13 seconds; LATEX processing takes additionally 10 seconds. Generation step runs may be executed simultaneously on multiprocessor machines.

Axially deformed solution of the Skyrme-Hartree-Fock-Bogoliubov equations using the transformed harmonic oscillator basis (II) HFBTHO v2.00d: A new version of the program

NASA Astrophysics Data System (ADS)

Stoitsov, M. V.; Schunck, N.; Kortelainen, M.; Michel, N.; Nam, H.; Olsen, E.; Sarich, J.; Wild, S.

2013-06-01

We describe the new version 2.00d of the code HFBTHO that solves the nuclear Skyrme-Hartree-Fock (HF) or Skyrme-Hartree-Fock-Bogoliubov (HFB) problem by using the cylindrical transformed deformed harmonic oscillator basis. In the new version, we have implemented the following features: (i) the modified Broyden method for non-linear problems, (ii) optional breaking of reflection symmetry, (iii) calculation of axial multipole moments, (iv) finite temperature formalism for the HFB method, (v) linear constraint method based on the approximation of the Random Phase Approximation (RPA) matrix for multi-constraint calculations, (vi) blocking of quasi-particles in the Equal Filling Approximation (EFA), (vii) framework for generalized energy density with arbitrary density-dependences, and (viii) shared memory parallelism via OpenMP pragmas. Program summaryProgram title: HFBTHO v2.00d Catalog identifier: ADUI_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADUI_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License version 3 No. of lines in distributed program, including test data, etc.: 167228 No. of bytes in distributed program, including test data, etc.: 2672156 Distribution format: tar.gz Programming language: FORTRAN-95. Computer: Intel Pentium-III, Intel Xeon, AMD-Athlon, AMD-Opteron, Cray XT5, Cray XE6. Operating system: UNIX, LINUX, WindowsXP. RAM: 200 Mwords Word size: 8 bits Classification: 17.22. Does the new version supercede the previous version?: Yes Catalog identifier of previous version: ADUI_v1_0 Journal reference of previous version: Comput. Phys. Comm. 167 (2005) 43 Nature of problem: The solution of self-consistent mean-field equations for weakly-bound paired nuclei requires a correct description of the asymptotic properties of nuclear quasi-particle wave functions. In the present implementation, this is achieved by using the single-particle wave functions of the transformed harmonic oscillator, which allows for an accurate description of deformation effects and pairing correlations in nuclei arbitrarily close to the particle drip lines. Solution method: The program uses the axial Transformed Harmonic Oscillator (THO) single- particle basis to expand quasi-particle wave functions. It iteratively diagonalizes the Hartree-Fock-Bogoliubov Hamiltonian based on generalized Skyrme-like energy densities and zero-range pairing interactions until a self-consistent solution is found. A previous version of the program was presented in: M.V. Stoitsov, J. Dobaczewski, W. Nazarewicz, P. Ring, Comput. Phys. Commun. 167 (2005) 43-63. Reasons for new version: Version 2.00d of HFBTHO provides a number of new options such as the optional breaking of reflection symmetry, the calculation of axial multipole moments, the finite temperature formalism for the HFB method, optimized multi-constraint calculations, the treatment of odd-even and odd-odd nuclei in the blocking approximation, and the framework for generalized energy density with arbitrary density-dependences. It is also the first version of HFBTHO to contain threading capabilities. Summary of revisions: The modified Broyden method has been implemented, Optional breaking of reflection symmetry has been implemented, The calculation of all axial multipole moments up to λ=8 has been implemented, The finite temperature formalism for the HFB method has been implemented, The linear constraint method based on the approximation of the Random Phase Approximation (RPA) matrix for multi-constraint calculations has been implemented, The blocking of quasi-particles in the Equal Filling Approximation (EFA) has been implemented, The framework for generalized energy density functionals with arbitrary density-dependence has been implemented, Shared memory parallelism via OpenMP pragmas has been implemented. Restrictions: Axial- and time-reversal symmetries are assumed. Unusual features: The user must have access to the LAPACK subroutines DSYEVD, DSYTRF and DSYTRI, and their dependences, which compute eigenvalues and eigenfunctions of real symmetric matrices, the LAPACK subroutines DGETRI and DGETRF, which invert arbitrary real matrices, and the BLAS routines DCOPY, DSCAL, DGEMM and DGEMV for double-precision linear algebra (or provide another set of subroutines that can perform such tasks). The BLAS and LAPACK subroutines can be obtained from the Netlib Repository at the University of Tennessee, Knoxville: http://netlib2.cs.utk.edu/. Running time: Highly variable, as it depends on the nucleus, size of the basis, requested accuracy, requested configuration, compiler and libraries, and hardware architecture. An order of magnitude would be a few seconds for ground-state configurations in small bases N≈8-12, to a few minutes in very deformed configuration of a heavy nucleus with a large basis N>20.

RIS3: A program for relativistic isotope shift calculations

NASA Astrophysics Data System (ADS)

Nazé, C.; Gaidamauskas, E.; Gaigalas, G.; Godefroid, M.; Jönsson, P.

2013-09-01

An atomic spectral line is characteristic of the element producing the spectrum. The line also depends on the isotope. The program RIS3 (Relativistic Isotope Shift) calculates the electron density at the origin and the normal and specific mass shift parameters. Combining these electronic quantities with available nuclear data, isotope-dependent energy level shifts are determined. Program summaryProgram title:RIS3 Catalogue identifier: ADEK_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADEK_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 5147 No. of bytes in distributed program, including test data, etc.: 32869 Distribution format: tar.gz Programming language: Fortran 77. Computer: HP ProLiant BL465c G7 CTO. Operating system: Centos 5.5, which is a Linux distribution compatible with Red Hat Enterprise Advanced Server. Classification: 2.1. Catalogue identifier of previous version: ADEK_v1_0 Journal reference of previous version: Comput. Phys. Comm. 100 (1997) 81 Subprograms used: Cat Id Title Reference ADZL_v1_1 GRASP2K VERSION 1_1 to be published. Does the new version supersede the previous version?: Yes Nature of problem: Prediction of level and transition isotope shifts in atoms using four-component relativistic wave functions. Solution method: The nuclear motion and volume effects are treated in first order perturbation theory. Taking the zero-order wave function in terms of a configuration state expansion |Ψ>=∑μcμ|Φ(γμPJMj)>, where P, J and MJ are, respectively, the parity and angular quantum numbers, the electron density at the nucleus and the normal and specific mass shift parameters may generally be expressed as ∑cμcν<γμPJMj|V|γνPJMj> where V is the relevant operator. The matrix elements, in turn, can be expressed as sums over radial integrals multiplied by angular coefficients. All the angular coefficients are calculated using routines from the GRASP2K version 1_1 package [1]. Reasons for new version: This new version takes the nuclear recoil corrections into account within the (m2/M approximation [2] and also allows storage of the angular coefficients for a series of calculations within a given isoelectronic sequence. Furthermore, the program JJ2LSJ, a module of the GRASP2K version 1_1 toolkit that allows a transformation of ASFs from a jj-coupled CSF basis into an LSJ-coupled CSF basis, has been especially adapted to present RIS3 results using LSJ labels of the states. This additional tool is called RIS3_LSJ. Summary of revisions: This version is compatible with the new angular approach of the GRASP2K version 1_1 package [1] and can store necessary angular coefficients. According to the formalism of the relativistic nuclear recoil, the "uncorrected" expression of the normal mass shift has been fundamentally modified compared with its expression in [3]. Restrictions: The complexity of the cases that can be handled is entirely determined by the GRASP2K package [1] used for the generation of the electronic wave functions. Unusual features: Angular data is stored on disk and can be reused. LSJ labels are used for the states. Running time: As an example, we evaluated the isotope shift parameters and the electron density at the origin using the wave functions of Be-like system. We used the MCDHF wave function built on a complete active space (CAS) with n=8 (296 626 CSFs-62 orbitals) that contains 3 non-interacting blocks of given parity and J values involving 6 different eigenvalues in total. Calculations take around 10 h on one AMD Opteron 6100 @ 2.3 GHz CPU with 8 cores (64 GB DDR3 RAM 1.333 GHz). If angular files are available the time is reduced to 20 min. The storage of the angular data takes 139 MB and 7.2 GB for the one-body and the two-body elements, respectively. References: [1] P. Jönsson, G. Gaigalas, J. Bieroń, C. Froese Fischer, I.P. Grant, New version: GRASP2K relativistic atomic structure package, Comput. Phys. Commun. 184 (9) (2013) 2197-2203. [2] E. Gaidamauskas, C. Nazé, P. Rynkun, G. Gaigalas, P. Jönsson, M. Godefroid, J. Phys. B: At. Mol. Opt. Phys. 44 (17) (2011) 175003. [3] P. Jönsson, C. Froese Fischer, Comput. Phys. Commun. 100 (1997) 81-92.

Comparison of two methods in deriving a short version of oral health-related quality of life measure.

PubMed

Saub, R; Locker, D; Allison, P

2008-09-01

To compare two methods of developing short forms of the Malaysian Oral Health Impact Profile (OHIP-M) measure. Cross sectional data obtained using the long form of the OHIP-M was used to produce two types of OHIP-M short forms, derived using two different methods; namely regression and item frequency methods. The short version derived using a regression method is known as Reg-SOHIP(M) and that derived using a frequency method is known as Freq-SOHIP(M). Both short forms contained 14 items. These two forms were then compared in terms of their content, scores, reliability, validity and the ability to distinguish between groups. Out of 14 items, only four were in common. The form derived from the frequency method contained more high prevalence items and higher scores than the form derived from the regression method. Both methods produced a reliable and valid measure. However, the frequency method produced a measure, which was slightly better in terms of distinguishing between groups. Regardless of the method used to produce the measures, both forms performed equally well when tested for their cross-sectional psychometric properties.

TS-SRP/PACK - COMPUTER PROGRAMS TO CHARACTERIZE ALLOYS AND PREDICT CYCLIC LIFE USING THE TOTAL STRAIN VERSION OF STRAINRANGE PARTITIONING

NASA Technical Reports Server (NTRS)

Saltsman, J. F.

1994-01-01

TS-SRP/PACK is a set of computer programs for characterizing and predicting fatigue and creep-fatigue resistance of metallic materials in the high-temperature, long-life regime for isothermal and nonisothermal fatigue. The programs use the total strain version of the Strainrange Partitioning (TS-SRP). The user should be thoroughly familiar with the TS-SRP method before attempting to use any of these programs. The document for this program includes a theory manual as well as a detailed user's manual with a tutorial to guide the user in the proper use of TS-SRP. An extensive database has also been developed in a parallel effort. This database is an excellent source of high-temperature, creep-fatigue test data and can be used with other life-prediction methods as well. Five programs are included in TS-SRP/PACK along with the alloy database. The TABLE program is used to print the datasets, which are in NAMELIST format, in a reader friendly format. INDATA is used to create new datasets or add to existing ones. The FAIL program is used to characterize the failure behavior of an alloy as given by the constants in the strainrange-life relations used by the total strain version of SRP (TS-SRP) and the inelastic strainrange-based version of SRP. The program FLOW is used to characterize the flow behavior (the constitutive response) of an alloy as given by the constants in the flow equations used by TS-SRP. Finally, LIFE is used to predict the life of a specified cycle, using the constants characterizing failure and flow behavior determined by FAIL and FLOW. LIFE is written in interpretive BASIC to avoid compiling and linking every time the equation constants are changed. Four out of five programs in this package are written in FORTRAN 77 for IBM PC series and compatible computers running MS-DOS and are designed to read data using the NAMELIST format statement. The fifth is written in BASIC version 3.0 for IBM PC series and compatible computers running MS-DOS version 3.10. The executables require at least 239K of memory and DOS 3.1 or higher. To compile the source, a Lahey FORTRAN compiler is required. Source code modifications will be necessary if the compiler to be used does not support NAMELIST input. Probably the easiest revision to make is to use a list-directed READ statement. The standard distribution medium for this program is a set of two 5.25 inch 360K MS-DOS format diskettes. The contents of the diskettes are compressed using the PKWARE archiving tools. The utility to unarchive the files, PKUNZIP.EXE, is included. TS-SRP/PACK was developed in 1992.

ESTIMATION OF INTERNAL EXPOSURE TO URANIUM WITH UNCERTAINTY FROM URINALYSIS DATA USING THE InDEP COMPUTER CODE

PubMed Central

Anderson, Jeri L.; Apostoaei, A. Iulian; Thomas, Brian A.

2015-01-01

The National Institute for Occupational Safety and Health (NIOSH) is currently studying mortality in a cohort of 6409 workers at a former uranium processing facility. As part of this study, over 220 000 urine samples were used to reconstruct organ doses due to internal exposure to uranium. Most of the available computational programs designed for analysis of bioassay data handle a single case at a time, and thus require a significant outlay of time and resources for the exposure assessment of a large cohort. NIOSH is currently supporting the development of a computer program, InDEP (Internal Dose Evaluation Program), to facilitate internal radiation exposure assessment as part of epidemiological studies of both uranium- and plutonium-exposed cohorts. A novel feature of InDEP is its batch processing capability which allows for the evaluation of multiple study subjects simultaneously. InDEP analyses bioassay data and derives intakes and organ doses with uncertainty estimates using least-squares regression techniques or using the Bayes’ Theorem as applied to internal dosimetry (Bayesian method). This paper describes the application of the current version of InDEP to formulate assumptions about the characteristics of exposure at the study facility that were used in a detailed retrospective intake and organ dose assessment of the cohort. PMID:22683620

A new version of the helicopter aural detection program, ICHIN

NASA Technical Reports Server (NTRS)

Mueller, A. W.; Smith, C. D.; Shepherd, K. P.; Sullivan, B. M.

1986-01-01

NASA Langley Research Center personnel have conducted an evaluation of the helicopter aural detection program I Can Hear It Now (ICHIN version-5). This was accomplished using flight noise data of five helicopters, obtained from a joint NASA and U.S. Army acoustics measurement program. The evaluation consisted of presenting the noise data to a jury of 20 subjects and to the ICHIN-5 program. A comparative study was then made of the detection distances determined by the jury and predicted by ICHIN-5. This report presents the changes made in the ICHIN-5 program as a result of this comparative study. The changes represent current psychoacoustics and propagation knowledge.

Design and Implementation of a Distributed Version of the NASA Engine Performance Program

NASA Technical Reports Server (NTRS)

Cours, Jeffrey T.

1994-01-01

Distributed NEPP is a new version of the NASA Engine Performance Program that runs in parallel on a collection of Unix workstations connected through a network. The program is fault-tolerant, efficient, and shows significant speed-up in a multi-user, heterogeneous environment. This report describes the issues involved in designing distributed NEPP, the algorithms the program uses, and the performance distributed NEPP achieves. It develops an analytical model to predict and measure the performance of the simple distribution, multiple distribution, and fault-tolerant distribution algorithms that distributed NEPP incorporates. Finally, the appendices explain how to use distributed NEPP and document the organization of the program's source code.

An "Evidence-Based" Professional Development Program for Physics Teachers Focusing on Knowledge Integration

NASA Astrophysics Data System (ADS)

Berger, Hana

This dissertation is concerned with the design and study of an evidence-based approach to the professional development of high-school physics teachers responding to the need to develop effective continuing professional development programs (CPD) in domains that require genuine changes in teachers' views, knowledge, and practice. The goals of the thesis were to design an evidence-based model for the CPD program, to implement it with teachers, and to study its influence on teachers' knowledge, views, and practice, as well as its impact on students' learning. The program was developed in three consecutive versions: a pilot, first, and second versions. Based on the pilot version (that was not part of this study), we developed the first version of the program in which we studied difficulties in employing the evidence-based and blended-learning approaches. According to our findings, we modified the strategies for enacting these approaches in the second version of the program. The influence of the program on the teachers and students was studied during the enactment of the second version of the program. The model implemented in the second version of the program was characterized by four main design principles: 1. The KI and evidence aspects are acquired simultaneously in an integrated manner. 2. The guidance of the teachers follows the principles of cognitive apprenticeship both in the evidence and the KI aspects. 3. The teachers experience the innovative activities as learners. 4. The program promotes continuity of teachers' learning through a structured "blended learning" approach. The results of our study show that this version of the program achieved its goals; throughout the program the teachers progressed in their knowledge, views, and practice concerning the knowledge integration, and in the evidence and learner-centered aspects. The results also indicated that students improved their knowledge of physics and knowledge integration skills that were developed throughout the program. More specifically, analysis of the teachers' discourse during the second version revealed that the program led to significant changes in teachers' knowledge about their students' knowledge and in teachers' views about the following: 1. the advantages of the KIRs' innovative teaching tool, 2. the "evidence" as a useful resource for evaluating the contribution of the KIRs to students' learning, and more generally, as a powerful tool for investigating students' learning, and for improving practice, and 3. several "learner-centered" pedagogical aspects: the importance and legitimacy of learning from peers, the need to listen carefully to students' ideas and reflections, and the need to investigate students' knowledge using a variety of methods, and to plan the teaching accordingly. Our analysis of the students' worksheets verified the teachers' findings about their students' initial state of knowledge and the improvement of this knowledge as a result of advancing through the KIR phases. When we extended the sample and examined worksheets of additional classes, we found similar findings. We also found that the students were aware of the improvement in their knowledge and attributed this improvement to their working with the KIRs. Two major recommendations emerge from this study: 1. We recommend that KIRs be routinely incorporated into physics teaching. The results show that the KIRs contribute to teachers' practice and to students' learning and support the teachers in becoming more learner-centered in their teaching. 2. We recommend incorporating an evidence-based approach in long-term programs aimed at bringing about a significant change in the teachers' practice. In order to engage the teachers with the evidence endeavor, it is recommended to introduce them an innovative teaching tool that is considered by them important and to evoke their curiosity to find out empirically about the influence of the tool on their students' learning. It is also recommended to engage the teachers in ongoing interactions about their experience in implementing the innovative tools in their classes through an online platform by which special, simple online tools are enacted. The present study has several limitations that suggest directions for further study, some of which can be based on the present set of data, but others require additional study. These directions include a detailed study of individual teachers' professional development, studies of ways to up-scale the evidence-based approach and use it effectively in less intensive courses, an extensive study of how students study with the improved versions of the KIRs that resulted from this study, and further investigation into how the new computerized tools can be utilized in professional development courses. (Abstract shortened by UMI.)

BehavePlus fire modeling system, version 5.0: Variables

Treesearch

Patricia L. Andrews

2009-01-01

This publication has been revised to reflect updates to version 4.0 of the BehavePlus software. It was originally published as the BehavePlus fire modeling system, version 4.0: Variables in July, 2008.The BehavePlus fire modeling system is a computer program based on mathematical models that describe wildland fire behavior and effects and the...

Spacecraft Orbit Design and Analysis (SODA). Version 2.0: User's guide

NASA Technical Reports Server (NTRS)

Stallcup, Scott S.; Davis, John S.; Zsoldos, Jeffrey S.

1991-01-01

The Spacecraft Orbit Design and Analysis (SODA) computer program, Version 2.0, is discussed. SODA is a spaceflight mission planning system that consists of six program modules integrated around a common database and user interface. SODA runs on a VAX/VMS computer with an Evans and Sutherland PS300 graphics workstation. In the current version, three program modules produce an interactive three dimensional animation of one or more satellites in planetary orbit. Satellite visibility and sensor coverage capabilities are also provided. Circular and rectangular, off nadir, fixed and scanning sensors are supported. One module produces an interactive three dimensional animation of the solar system. Another module calculates cumulative satellite sensor coverage and revisit time for one or more satellites. Currently, Earth, Moon, and Mars systems are supported for all modules except the solar system module.

Simulating electron energy loss spectroscopy with the MNPBEM toolbox

NASA Astrophysics Data System (ADS)

Hohenester, Ulrich

2014-03-01

Within the MNPBEM toolbox, we show how to simulate electron energy loss spectroscopy (EELS) of plasmonic nanoparticles using a boundary element method approach. The methodology underlying our approach closely follows the concepts developed by García de Abajo and coworkers (Garcia de Abajo, 2010). We introduce two classes eelsret and eelsstat that allow in combination with our recently developed MNPBEM toolbox for a simple, robust, and efficient computation of EEL spectra and maps. The classes are accompanied by a number of demo programs for EELS simulation of metallic nanospheres, nanodisks, and nanotriangles, and for electron trajectories passing by or penetrating through the metallic nanoparticles. We also discuss how to compute electric fields induced by the electron beam and cathodoluminescence. Catalogue identifier: AEKJ_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKJ_v2_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 38886 No. of bytes in distributed program, including test data, etc.: 1222650 Distribution format: tar.gz Programming language: Matlab 7.11.0 (R2010b). Computer: Any which supports Matlab 7.11.0 (R2010b). Operating system: Any which supports Matlab 7.11.0 (R2010b). RAM:≥1 GB Classification: 18. Catalogue identifier of previous version: AEKJ_v1_0 Journal reference of previous version: Comput. Phys. Comm. 183 (2012) 370 External routines: MESH2D available at www.mathworks.com Does the new version supersede the previous version?: Yes Nature of problem: Simulation of electron energy loss spectroscopy (EELS) for plasmonic nanoparticles. Solution method: Boundary element method using electromagnetic potentials. Reasons for new version: The new version of the toolbox includes two additional classes for the simulation of electron energy loss spectroscopy (EELS) of plasmonic nanoparticles, and corrects a few minor bugs and inconsistencies. Summary of revisions: New classes “eelsstat” and “eelsret” for the simulation of electron energy loss spectroscopy (EELS) of plasmonic nanoparticles have been added. A few minor errors in the implementation of dipole excitation have been corrected. Running time: Depending on surface discretization between seconds and hours.

ASTROP2 Users Manual: A Program for Aeroelastic Stability Analysis of Propfans

NASA Technical Reports Server (NTRS)

Reddy, T. S. R.; Lucero, John M.

1996-01-01

This manual describes the input data required for using the second version of the ASTROP2 (Aeroelastic STability and Response Of Propulsion systems - 2 dimensional analysis) computer code. In ASTROP2, version 2.0, the program is divided into two modules: 2DSTRIP, which calculates the structural dynamic information; and 2DASTROP, which calculates the unsteady aerodynamic force coefficients from which the aeroelastic stability can be determined. In the original version of ASTROP2, these two aspects were performed in a single program. The improvements to version 2.0 include an option to account for counter rotation, improved numerical integration, accommodation for non-uniform inflow distribution, and an iterative scheme to flutter frequency convergence. ASTROP2 can be used for flutter analysis of multi-bladed structures such as those found in compressors, turbines, counter rotating propellers or propfans. The analysis combines a two-dimensional, unsteady cascade aerodynamics model and a three dimensional, normal mode structural model using strip theory. The flutter analysis is formulated in the frequency domain resulting in an eigenvalue determinant. The flutter frequency and damping can be inferred from the eigenvalues.

Update on PISCES

NASA Technical Reports Server (NTRS)

Pearson, Don; Hamm, Dustin; Kubena, Brian; Weaver, Jonathan K.

2010-01-01

An updated version of the Platform Independent Software Components for the Exploration of Space (PISCES) software library is available. A previous version was reported in Library for Developing Spacecraft-Mission-Planning Software (MSC-22983), NASA Tech Briefs, Vol. 25, No. 7 (July 2001), page 52. To recapitulate: This software provides for Web-based, collaborative development of computer programs for planning trajectories and trajectory- related aspects of spacecraft-mission design. The library was built using state-of-the-art object-oriented concepts and software-development methodologies. The components of PISCES include Java-language application programs arranged in a hierarchy of classes that facilitates the reuse of the components. As its full name suggests, the PISCES library affords platform-independence: The Java language makes it possible to use the classes and application programs with a Java virtual machine, which is available in most Web-browser programs. Another advantage is expandability: Object orientation facilitates expansion of the library through creation of a new class. Improvements in the library since the previous version include development of orbital-maneuver- planning and rendezvous-launch-window application programs, enhancement of capabilities for propagation of orbits, and development of a desktop user interface.

Effect of formal specifications on program complexity and reliability: An experimental study

NASA Technical Reports Server (NTRS)

Goel, Amrit L.; Sahoo, Swarupa N.

1990-01-01

The results are presented of an experimental study undertaken to assess the improvement in program quality by using formal specifications. Specifications in the Z notation were developed for a simple but realistic antimissile system. These specifications were then used to develop 2 versions in C by 2 programmers. Another set of 3 versions in Ada were independently developed from informal specifications in English. A comparison of the reliability and complexity of the resulting programs suggests the advantages of using formal specifications in terms of number of errors detected and fault avoidance.

BOOK REVIEW: Numerical Recipes in C++: The Art of Scientific Computing (2nd edn)1 Numerical Recipes Example Book (C++) (2nd edn)2 Numerical Recipes Multi-Language Code CD ROM with LINUX or UNIX Single-Screen License Revised Version3Numerical Recipes in C++: The Art of Scientific Computing (2nd edn) Numerical Recipes Example Book (C++) (2nd edn) Numerical Recipes Multi-Language Code CD ROM with LINUX or UNIX Single-Screen License Revised Version

NASA Astrophysics Data System (ADS)

Press, William H.; Teukolsky, Saul A.; Vettering, William T.; Flannery, Brian P.

2003-05-01

The two Numerical Recipes books are marvellous. The principal book, The Art of Scientific Computing, contains program listings for almost every conceivable requirement, and it also contains a well written discussion of the algorithms and the numerical methods involved. The Example Book provides a complete driving program, with helpful notes, for nearly all the routines in the principal book. The first edition of Numerical Recipes: The Art of Scientific Computing was published in 1986 in two versions, one with programs in Fortran, the other with programs in Pascal. There were subsequent versions with programs in BASIC and in C. The second, enlarged edition was published in 1992, again in two versions, one with programs in Fortran (NR(F)), the other with programs in C (NR(C)). In 1996 the authors produced Numerical Recipes in Fortran 90: The Art of Parallel Scientific Computing as a supplement, called Volume 2, with the original (Fortran) version referred to as Volume 1. Numerical Recipes in C++ (NR(C++)) is another version of the 1992 edition. The numerical recipes are also available on a CD ROM: if you want to use any of the recipes, I would strongly advise you to buy the CD ROM. The CD ROM contains the programs in all the languages. When the first edition was published I bought it, and have also bought copies of the other editions as they have appeared. Anyone involved in scientific computing ought to have a copy of at least one version of Numerical Recipes, and there also ought to be copies in every library. If you already have NR(F), should you buy the NR(C++) and, if not, which version should you buy? In the preface to Volume 2 of NR(F), the authors say 'C and C++ programmers have not been far from our minds as we have written this volume, and we think that you will find that time spent in absorbing its principal lessons will be amply repaid in the future as C and C++ eventually develop standard parallel extensions'. In the preface and introduction to NR(C++), the authors point out some of the problems in the use of C++ in scientific computing. I have not found any mention of parallel computing in NR(C++). Fortran has quite a lot going for it. As someone who has used it in most of its versions from Fortran II, I have seen it develop and leave behind other languages promoted by various enthusiasts: who now uses Algol or Pascal? I think it unlikely that C++ will disappear: it was devised as a systems language, and can also be used for other purposes such as scientific computing. It is possible that Fortran will disappear, but Fortran has the strengths that it can develop, that there are extensive Fortran subroutine libraries, and that it has been developed for parallel computing. To argue with programmers as to which is the best language to use is sterile. If you wish to use C++, then buy NR(C++), but you should also look at volume 2 of NR(F). If you are a Fortran programmer, then make sure you have NR(F), volumes 1 and 2. But whichever language you use, make sure you have one version or the other, and the CD ROM. The Example Book provides listings of complete programs to run nearly all the routines in NR, frequently based on cases where an anlytical solution is available. It is helpful when developing a new program incorporating an unfamiliar routine to see that routine actually working, and this is what the programs in the Example Book achieve. I started teaching computational physics before Numerical Recipes was published. If I were starting again, I would make heavy use of both The Art of Scientific Computing and of the Example Book. Every computational physics teaching laboratory should have both volumes: the programs in the Example Book are included on the CD ROM, but the extra commentary in the book itself is of considerable value. P Borcherds

MOLECULAR DESIGNER: an interactive program for the display of protein structure on the IBM-PC.

PubMed

Hannon, G J; Jentoft, J E

1985-09-01

A BASIC interactive graphics program has been developed for the IBM-PC which utilizes the graphics capabilities of that computer to display and manipulate protein structure from coordinates. Structures may be generated from typed files, or from Brookhaven National Laboratories' Protein Data Bank data tapes. Once displayed, images may be rotated, translated and expanded to any desired size. Figures may be viewed as ball-and-stick or space-filling models. Calculated multiple-point perspective may also be added to the display. Docking manipulations are possible since more than a single figure may be displayed and manipulated simultaneously. Further, stereo images and red/blue three-dimensional images may be generated using the accompanying DESIPLOT program and an HP-7475A plotter. A version of the program is also currently available for the Apple Macintosh. Full implementation on the Macintosh requires 512 K and at least one disk drive. Otherwise this version is essentially identical to the IBM-PC version described herein.

Solution of monotone complementarity and general convex programming problems using a modified potential reduction interior point method

DOE PAGES

Huang, Kuo -Ling; Mehrotra, Sanjay

2016-11-08

We present a homogeneous algorithm equipped with a modified potential function for the monotone complementarity problem. We show that this potential function is reduced by at least a constant amount if a scaled Lipschitz condition (SLC) is satisfied. A practical algorithm based on this potential function is implemented in a software package named iOptimize. The implementation in iOptimize maintains global linear and polynomial time convergence properties, while achieving practical performance. It either successfully solves the problem, or concludes that the SLC is not satisfied. When compared with the mature software package MOSEK (barrier solver version 6.0.0.106), iOptimize solves convex quadraticmore » programming problems, convex quadratically constrained quadratic programming problems, and general convex programming problems in fewer iterations. Moreover, several problems for which MOSEK fails are solved to optimality. In addition, we also find that iOptimize detects infeasibility more reliably than the general nonlinear solvers Ipopt (version 3.9.2) and Knitro (version 8.0).« less

[Predictors of hospitalization for alcohol use disorder in Korean men].

PubMed

Hong, Hae-Sook; Park, Jeong-Eun; Park, Wan-Ju

2014-10-01

This study was done to identify the patterns and significant predictors influencing hospitalization of Korean men for alcohol use disorder. A descriptive study design was utilized. Data were collected using self-report questionnaires from 143 inpatients who met the DSM-5 alcohol use disorder criteria and were receiving treatment and 157 social drinkers living in the community. The questionnaires included Alcohol Use Disorders Identification Test (AUDIT), Alcohol Problems, Alcohol Expectancy Questionnaire (AEQ), Life Position, and The Korean version of the Children of Alcoholics Screening Test (CAST-K). Data were analyzed using descriptive statistics, t-test, χ²-test, F-test, Pearson correlation coefficients, and logistic regression with forward stepwise. AUDIT had significant correlations with alcohol problems, alcohol expectancy, and parents' alcoholism. In logistic regression, factors significantly affecting hospitalization were divorced (OR=4.18, 95% CI: 1.28-13.71), graduation from elementary school (OR=28.50, 95% CI: 8.07-100.69), middle school (OR=6.66, 95% CI: 2.21-20.09), high school (OR=6.31, 95% CI: 2.59-15.36), drinking alone (OR=9.07, 95% CI: 1.78-46.17), family history of alcoholism (OR=2.41, 95% CI: 1.11-5.25), interpersonal relationship problems (OR=1.28, 95% CI:1.17-1.41), and sexual enhancement of alcohol expectancy (OR=0.83, 95% CI: 0.72-0.94), which accounted for 53% of the variance. Results suggest that interpersonal relationship programs and customized cognitive programs for social drinkers in the community are needed to decreased alcohol related hospitalization in Korean men.

ESDAPT - APT PROGRAMMING EDITOR AND INTERPRETER

NASA Technical Reports Server (NTRS)

Premack, T.

1994-01-01

ESDAPT is a graphical programming environment for developing APT (Automatically Programmed Tool) programs for controlling numerically controlled machine tools. ESDAPT has a graphical user interface that provides the user with an APT syntax sensitive text editor and windows for displaying geometry and tool paths. APT geometry statement can also be created using menus and screen picks. ESDAPT interprets APT geometry statements and displays the results in its view windows. Tool paths are generated by batching the APT source to an APT processor (COSMIC P-APT recommended). The tool paths are then displayed in the view windows. Hardcopy output of the view windows is in color PostScript format. ESDAPT is written in C-language, yacc, lex, and XView for use on Sun4 series computers running SunOS. ESDAPT requires 4Mb of disk space, 7Mb of RAM, and MIT's X Window System, Version 11 Release 4, or OpenWindows version 3 for execution. Program documentation in PostScript format and an executable for OpenWindows version 3 are provided on the distribution media. The standard distribution medium for ESDAPT is a .25 inch streaming magnetic tape cartridge (Sun QIC-24) in UNIX tar format. This program was developed in 1992.

Testing the generalized complementary relationship of evaporation with continental-scale long-term water-balance data

NASA Astrophysics Data System (ADS)

Szilagyi, Jozsef; Crago, Richard; Qualls, Russell J.

2016-09-01

The original and revised versions of the generalized complementary relationship (GCR) of evaporation (ET) were tested with six-digit Hydrologic Unit Code (HUC6) level long-term (1981-2010) water-balance data (sample size of 334). The two versions of the GCR were calibrated with Parameter-Elevation Regressions on Independent Slopes Model (PRISM) mean annual precipitation (P) data and validated against water-balance ET (ETwb) as the difference of mean annual HUC6-averaged P and United States Geological Survey HUC6 runoff (Q) rates. The original GCR overestimates P in about 18% of the PRISM grid points covering the contiguous United States in contrast with 12% of the revised version. With HUC6-averaged data the original version has a bias of -25 mm yr-1 vs the revised version's -17 mm yr-1, and it tends to more significantly underestimate ETwb at high values than the revised one (slope of the best fit line is 0.78 vs 0.91). At the same time it slightly outperforms the revised version in terms of the linear correlation coefficient (0.94 vs 0.93) and the root-mean-square error (90 vs 92 mm yr-1).

Numerical evaluation of multi-loop integrals for arbitrary kinematics with SecDec 2.0

NASA Astrophysics Data System (ADS)

Borowka, Sophia; Carter, Jonathon; Heinrich, Gudrun

2013-02-01

We present the program SecDec 2.0, which contains various new features. First, it allows the numerical evaluation of multi-loop integrals with no restriction on the kinematics. Dimensionally regulated ultraviolet and infrared singularities are isolated via sector decomposition, while threshold singularities are handled by a deformation of the integration contour in the complex plane. As an application, we present numerical results for various massive two-loop four-point diagrams. SecDec 2.0 also contains new useful features for the calculation of more general parameter integrals, related for example to phase space integrals. Program summaryProgram title: SecDec 2.0 Catalogue identifier: AEIR_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEIR_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 156829 No. of bytes in distributed program, including test data, etc.: 2137907 Distribution format: tar.gz Programming language: Wolfram Mathematica, Perl, Fortran/C++. Computer: From a single PC to a cluster, depending on the problem. Operating system: Unix, Linux. RAM: Depending on the complexity of the problem Classification: 4.4, 5, 11.1. Catalogue identifier of previous version: AEIR_v1_0 Journal reference of previous version: Comput. Phys. Comm. 182(2011)1566 Does the new version supersede the previous version?: Yes Nature of problem: Extraction of ultraviolet and infrared singularities from parametric integrals appearing in higher order perturbative calculations in gauge theories. Numerical integration in the presence of integrable singularities (e.g., kinematic thresholds). Solution method: Algebraic extraction of singularities in dimensional regularization using iterated sector decomposition. This leads to a Laurent series in the dimensional regularization parameter ɛ, where the coefficients are finite integrals over the unit hypercube. Those integrals are evaluated numerically by Monte Carlo integration. The integrable singularities are handled by choosing a suitable integration contour in the complex plane, in an automated way. Reasons for new version: In the previous version the calculation of multi-scale integrals was restricted to the Euclidean region. Now multi-loop integrals with arbitrary physical kinematics can be evaluated. Another major improvement is the possibility of full parallelization. Summary of revisions: No restriction on the kinematics for multi-loop integrals. The integrand can be constructed from the topological cuts of the diagram. Possibility of full parallelization. Numerical integration of multi-loop integrals written in C++ rather than Fortran. Possibility to loop over ranges of parameters. Restrictions: Depending on the complexity of the problem, limited by memory and CPU time. The restriction that multi-scale integrals could only be evaluated at Euclidean points is superseded in version 2.0. Running time: Between a few minutes and several days, depending on the complexity of the problem. Test runs provided take only seconds.

A new version of the CADNA library for estimating round-off error propagation in Fortran programs

NASA Astrophysics Data System (ADS)

Jézéquel, Fabienne; Chesneaux, Jean-Marie; Lamotte, Jean-Luc

2010-11-01

The CADNA library enables one to estimate, using a probabilistic approach, round-off error propagation in any simulation program. CADNA provides new numerical types, the so-called stochastic types, on which round-off errors can be estimated. Furthermore CADNA contains the definition of arithmetic and relational operators which are overloaded for stochastic variables and the definition of mathematical functions which can be used with stochastic arguments. On 64-bit processors, depending on the rounding mode chosen, the mathematical library associated with the GNU Fortran compiler may provide incorrect results or generate severe bugs. Therefore the CADNA library has been improved to enable the numerical validation of programs on 64-bit processors. New version program summaryProgram title: CADNA Catalogue identifier: AEAT_v1_1 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEAT_v1_1.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 28 488 No. of bytes in distributed program, including test data, etc.: 463 778 Distribution format: tar.gz Programming language: Fortran NOTE: A C++ version of this program is available in the Library as AEGQ_v1_0 Computer: PC running LINUX with an i686 or an ia64 processor, UNIX workstations including SUN, IBM Operating system: LINUX, UNIX Classification: 6.5 Catalogue identifier of previous version: AEAT_v1_0 Journal reference of previous version: Comput. Phys. Commun. 178 (2008) 933 Does the new version supersede the previous version?: Yes Nature of problem: A simulation program which uses floating-point arithmetic generates round-off errors, due to the rounding performed at each assignment and at each arithmetic operation. Round-off error propagation may invalidate the result of a program. The CADNA library enables one to estimate round-off error propagation in any simulation program and to detect all numerical instabilities that may occur at run time. Solution method: The CADNA library [1-3] implements Discrete Stochastic Arithmetic [4,5] which is based on a probabilistic model of round-off errors. The program is run several times with a random rounding mode generating different results each time. From this set of results, CADNA estimates the number of exact significant digits in the result that would have been computed with standard floating-point arithmetic. Reasons for new version: On 64-bit processors, the mathematical library associated with the GNU Fortran compiler may provide incorrect results or generate severe bugs with rounding towards -∞ and +∞, which the random rounding mode is based on. Therefore a particular definition of mathematical functions for stochastic arguments has been included in the CADNA library to enable its use with the GNU Fortran compiler on 64-bit processors. Summary of revisions: If CADNA is used on a 64-bit processor with the GNU Fortran compiler, mathematical functions are computed with rounding to the nearest, otherwise they are computed with the random rounding mode. It must be pointed out that the knowledge of the accuracy of the stochastic argument of a mathematical function is never lost. Restrictions: CADNA requires a Fortran 90 (or newer) compiler. In the program to be linked with the CADNA library, round-off errors on complex variables cannot be estimated. Furthermore array functions such as product or sum must not be used. Only the arithmetic operators and the abs, min, max and sqrt functions can be used for arrays. Additional comments: In the library archive, users are advised to read the INSTALL file first. The doc directory contains a user guide named ug.cadna.pdf which shows how to control the numerical accuracy of a program using CADNA, provides installation instructions and describes test runs. The source code, which is located in the src directory, consists of one assembly language file (cadna_rounding.s) and eighteen Fortran language files. cadna_rounding.s is a symbolic link to the assembly file corresponding to the processor and the Fortran compiler used. This assembly file contains routines which are frequently called in the CADNA Fortran files to change the rounding mode. The Fortran language files contain the definition of the stochastic types on which the control of accuracy can be performed, CADNA specific functions (for instance to enable or disable the detection of numerical instabilities), the definition of arithmetic and relational operators which are overloaded for stochastic variables and the definition of mathematical functions which can be used with stochastic arguments. The examples directory contains seven test runs which illustrate the use of the CADNA library and the benefits of Discrete Stochastic Arithmetic. Running time: The version of a code which uses CADNA runs at least three times slower than its floating-point version. This cost depends on the computer architecture and can be higher if the detection of numerical instabilities is enabled. In this case, the cost may be related to the number of instabilities detected.

Ridge: a computer program for calculating ridge regression estimates

Treesearch

Donald E. Hilt; Donald W. Seegrist

1977-01-01

Least-squares coefficients for multiple-regression models may be unstable when the independent variables are highly correlated. Ridge regression is a biased estimation procedure that produces stable estimates of the coefficients. Ridge regression is discussed, and a computer program for calculating the ridge coefficients is presented.

Working in tandem: The contribution of remedial programs and roadside licence suspensions to drinking and driving deterrence in Ontario.

PubMed

Ma, Tracey; Byrne, Patrick A; Haya, Maryam; Elzohairy, Yoassry

2015-12-01

In 1998, Ontario implemented a remedial program called "Back On Track" (BOT) for individuals convicted of alcohol-impaired driving. Drivers convicted before October 2000 were exposed to a single-component program ("Edu BOT"); those convicted after participated in a multi-component program ("Full BOT"). We evaluated the impact of BOT, and the preceding 90-day roadside licence suspension, on drinking and driving recidivism, an outcome yet to be examined, using population-wide driver records. A Chi Square Test was used to compare the three-year cumulative incidence of recidivism between three historically-defined cohorts: No BOT, Edu BOT, and Full BOT. Stratified analyses by completion status and by age were also conducted. Analyses of the roadside suspension were conducted using an interrupted time series approach based on segmented Poisson/negative binomial regression. The roadside suspension was associated with a 65.2% reduction in drinking driving recidivism. In combination with indefinite suspensions for non-completion, the BOT program was also associated with a 21% decrease in drinking and driving recidivism in the three years following a CCC driving prohibition, from 8.5% to 6.7%. This reduction cannot be explained by pre-existing trends in recidivism. Conversion of the BOT program from the single-component version to the multi-component program further reduced the three-year cumulative incidence of recidivism to 5.5% (a total reduction of 35% from pre-BOT). Results provide strong converging evidence that remedial alcohol education/treatment programs in combination with other sanctions can produce substantial increases in road safety. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

FLAPS (Fatigue Life Analysis Programs): Computer Programs to Predict Cyclic Life Using the Total Strain Version of Strainrange Partitioning and Other Life Prediction Methods. Users' Manual and Example Problems, Version 1.0

NASA Technical Reports Server (NTRS)

Arya, Vinod K.; Halford, Gary R. (Technical Monitor)

2003-01-01

This manual presents computer programs FLAPS for characterizing and predicting fatigue and creep-fatigue resistance of metallic materials in the high-temperature, long-life regime for isothermal and nonisothermal fatigue. The programs use the Total Strain version of Strainrange Partitioning (TS-SRP), and several other life prediction methods described in this manual. The user should be thoroughly familiar with the TS-SRP and these life prediction methods before attempting to use any of these programs. Improper understanding can lead to incorrect use of the method and erroneous life predictions. An extensive database has also been developed in a parallel effort. The database is probably the largest source of high-temperature, creep-fatigue test data available in the public domain and can be used with other life-prediction methods as well. This users' manual, software, and database are all in the public domain and can be obtained by contacting the author. The Compact Disk (CD) accompanying this manual contains an executable file for the FLAPS program, two datasets required for the example problems in the manual, and the creep-fatigue data in a format compatible with these programs.

SINDA'85/FLUINT - SYSTEMS IMPROVED NUMERICAL DIFFERENCING ANALYZER AND FLUID INTEGRATOR (CONVEX VERSION)

NASA Technical Reports Server (NTRS)

Cullimore, B.

1994-01-01

SINDA, the Systems Improved Numerical Differencing Analyzer, is a software system for solving lumped parameter representations of physical problems governed by diffusion-type equations. SINDA was originally designed for analyzing thermal systems represented in electrical analog, lumped parameter form, although its use may be extended to include other classes of physical systems which can be modeled in this form. As a thermal analyzer, SINDA can handle such interrelated phenomena as sublimation, diffuse radiation within enclosures, transport delay effects, and sensitivity analysis. FLUINT, the FLUid INTegrator, is an advanced one-dimensional fluid analysis program that solves arbitrary fluid flow networks. The working fluids can be single phase vapor, single phase liquid, or two phase. The SINDA'85/FLUINT system permits the mutual influences of thermal and fluid problems to be analyzed. The SINDA system consists of a programming language, a preprocessor, and a subroutine library. The SINDA language is designed for working with lumped parameter representations and finite difference solution techniques. The preprocessor accepts programs written in the SINDA language and converts them into standard FORTRAN. The SINDA library consists of a large number of FORTRAN subroutines that perform a variety of commonly needed actions. The use of these subroutines can greatly reduce the programming effort required to solve many problems. A complete run of a SINDA'85/FLUINT model is a four step process. First, the user's desired model is run through the preprocessor which writes out data files for the processor to read and translates the user's program code. Second, the translated code is compiled. The third step requires linking the user's code with the processor library. Finally, the processor is executed. SINDA'85/FLUINT program features include 20,000 nodes, 100,000 conductors, 100 thermal submodels, and 10 fluid submodels. SINDA'85/FLUINT can also model two phase flow, capillary devices, user defined fluids, gravity and acceleration body forces on a fluid, and variable volumes. SINDA'85/FLUINT offers the following numerical solution techniques. The Finite difference formulation of the explicit method is the Forward-difference explicit approximation. The formulation of the implicit method is the Crank-Nicolson approximation. The program allows simulation of non-uniform heating and facilitates modeling thin-walled heat exchangers. The ability to model non-equilibrium behavior within two-phase volumes is included. Recent improvements to the program were made in modeling real evaporator-pumps and other capillary-assist evaporators. SINDA'85/FLUINT is available by license for a period of ten (10) years to approved licensees. The licensed program product includes the source code and one copy of the supporting documentation. Additional copies of the documentation may be purchased separately at any time. SINDA'85/FLUINT is written in FORTRAN 77. Version 2.3 has been implemented on Cray series computers running UNICOS, CONVEX computers running CONVEX OS, and DEC RISC computers running ULTRIX. Binaries are included with the Cray version only. The Cray version of SINDA'85/FLUINT also contains SINGE, an additional graphics program developed at Johnson Space Flight Center. Both source and executable code are provided for SINGE. Users wishing to create their own SINGE executable will also need the NASA Device Independent Graphics Library (NASADIG, previously known as SMDDIG; UNIX version, MSC-22001). The Cray and CONVEX versions of SINDA'85/FLUINT are available on 9-track 1600 BPI UNIX tar format magnetic tapes. The CONVEX version is also available on a .25 inch streaming magnetic tape cartridge in UNIX tar format. The DEC RISC ULTRIX version is available on a TK50 magnetic tape cartridge in UNIX tar format. SINDA was developed in 1971, and first had fluid capability added in 1975. SINDA'85/FLUINT version 2.3 was released in 1990.

Cross-cultural differences for adapting translated five-item version of International Index of Erectile Function: results of a Korean study.

PubMed

Ku, Ja Hyeon; Park, Dal Woo; Kim, Soo Woong; Paick, Jae-Seung

2005-06-01

To assess whether the translated Korean version of the International Index of Erectile Function (IIEF-5) developed by Rosen et al. (RIIEF-5) may be adapted for a Korean population to have cross-cultural equivalency to the original version. A total of 151 patients with erectile dysfunction (ED) and 156 controls were prospectively studied. All the patients and controls had had sexual activity or attempted sexual intercourse within the 4-week period before completing the questionnaire. The Classification and Regression Trees program was used to select an optimal set of five items from the IIEF-15 (KIIEF-5) to discriminate between men with and without ED. Then, the optimal cutoff score for the diagnosis of ED was determined using the receiver operating characteristic curve. The optimal cutoff score, sensitivity, and specificity were also calculated using the RIIEF-5. The KIIEF-5 consisted, in order of importance, of items 15, 5, 13, 4, and 2 from the IIEF-15. Item 7 in the original RIIEF-5 was replaced with item 13 in the new KIIEF-5. The optimal cutoff score proved to be 21, with a corresponding sensitivity and specificity of 0.97 and 0.91, respectively. For the original RIIEF-5, the optimal cutoff score was 21 and the corresponding sensitivity and specificity was 0.94 and 0.90, respectively. Although the RIIEF-5 may be adapted for a Korean population, the KIIEF-5 can aid in decreasing the incidence of an incorrect diagnosis of ED and decreasing the number of undiagnosed cases of ED in this population. In addition, our findings suggest that the equivalence of psychometric properties does not imply cross-cultural equivalence.

Can increases in CHIP copayments reduce program expenditures on prescription drugs?

PubMed

Sen, Bisakha; Blackburn, Justin; Morrisey, Michael; Becker, David; Kilgore, Meredith; Caldwell, Cathy; Menachemi, Nir

2014-01-01

The primary aim is to explore whether prescription drug expenditures by enrollees changed in Alabama's CHIP program, ALL Kids, after copayment increases in fiscal year 2004. The subsidiary aim is to explore whether non-pharmaceutical expenditures also changed. Data on ALL Kids enrollees between 1999-2007, obtained from claims files and the state's administrative database. We used data on children who were enrolled between one and three years both before and after the changes to the copayment schedule, and estimate regression models with individual-level fixed effects to control for time-invariant heterogeneity at the child level. This allows an accurate estimate of how program expenditures change for the same individual following copayment changes. Primary outcomes of interest are expenditures for prescription drugs by class and brand-name and generic versions. We estimate models for the likelihood of any use of prescription drugs and expenditure level conditional on use. Following the copayment increase, the probability of any expenditure decline by 5.8%, brand name drugs by 6.9%, generic drugs by 7.4%. Conditional on any use, program expenditures decline by 7.9% for all drugs, by 9.6% for brand name drugs, and 6.2% for generic drugs. The largest declines are for antihistamine drugs; the least declines are for Central Nervous System agents. Declines are smaller and statistically weaker for children with chronic health conditions. Concurrent declines are also seen for non-pharmaceutical medical expenditures. Copayment increases appear to reduce program expenditures on prescription drugs per enrollee and may be a useful tool for controlling program costs.

SCI model structure determination program (OSR) user's guide. [optimal subset regression

NASA Technical Reports Server (NTRS)

1979-01-01

The computer program, OSR (Optimal Subset Regression) which estimates models for rotorcraft body and rotor force and moment coefficients is described. The technique used is based on the subset regression algorithm. Given time histories of aerodynamic coefficients, aerodynamic variables, and control inputs, the program computes correlation between various time histories. The model structure determination is based on these correlations. Inputs and outputs of the program are given.

Sound Medication Therapy Management Programs, Version 2.0 with validation study.

PubMed

2008-01-01

The Academy of Managed Care Pharmacy (AMCP, the Academy) contracted with the National Committee for Quality Assurance (NCQA) to conduct a field study to validate and assess the 2006 Sound Medication Therapy Management Programs, Version 1.0 document. Version 1.0 posits several principles of sound medication therapy management (MTM) programs: they (1) recruit patients whose data show they may need assistance with managing medications; (2) have health professionals who intervene with patients and their physicians to improve medication regimens; and (3) measure their results. The validation study determined the extent to which the principles identified in version 1.0 are incorporated in MTM programs. The method was designed to determine to what extent the important features and operational elements of sound MTM programs as described in version 1.0 are (1) acceptable and seen as comprehensive to users, (2) incorporated into MTM programs in the field, (3) reflective of the consensus group's intentions, and (4) in need of modification or updating. NCQA first conducted Phase One, in which NCQA gathered perspectives on the principles in the consensus document from a mixed group of stakeholders representing both providers and users of MTM programs. Phase Two involved a deeper analysis of existing programs related to the consensus document, in which NCQA conducted a Web-based survey of 20 varied MTM programs and conducted in-depth site visits with 5 programs. NCQA selected programs offered by a range of MTM-providing organizations -- health plans, pharmacy benefit management companies, disease management organizations, and stand-alone MTM providers. NCQA analyzed the results of both phases. The Phase Two survey asked specific questions of the programs and found that some programs perform beyond the principles listed in version 1.0. NCQA found that none of the elements of the consensus document should be eliminated because programs cannot perform them, although NCQA suggested some areas where the document could be more expansive or more specific, given the state of MTM operations in the field. The important features and operational elements in the document were categorized into the following 3 overall categories, which NCQA used to structure the survey and conduct the site visits in Phase Two: (1) eligibility and enrollment, (2) operations, and (3) quality management. NCQA found that the original consensus document was realistic in identifying the elements of sound MTM. In the current project, NCQA's purpose was not to make judgments about the effectiveness of MTM programs in general or any individual program in particular. NCQA recommended that the consensus document could be made stronger and more specific in 3 areas: (1) specifically state that the Patient Identification and Recruitment section advocates use of various eligibility criteria that may include, but are not limited to, Medicare-defined MTM eligibility criteria; (2) reframe or remove the statement in Appendix A of the consensus document that the preferred modality for MTM is face-to-face interaction between patient and pharmacist, unless there are comparative data to support it as currently written; and (3) specifically recommend that programs measure performance across the entire populations in their plans in addition to measuring results for those patients selected into MTM. This will make benchmarking among programs possible and will lead to substantiated best practices in this growing field.

A modular finite-element model (MODFE) for areal and axisymmetric ground-water-flow problems, Part 3: Design philosophy and programming details

USGS Publications Warehouse

Torak, L.J.

1993-01-01

A MODular Finite-Element, digital-computer program (MODFE) was developed to simulate steady or unsteady-state, two-dimensional or axisymmetric ground-water-flow. The modular structure of MODFE places the computationally independent tasks that are performed routinely by digital-computer programs simulating ground-water flow into separate subroutines, which are executed from the main program by control statements. Each subroutine consists of complete sets of computations, or modules, which are identified by comment statements, and can be modified by the user without affecting unrelated computations elsewhere in the program. Simulation capabilities can be added or modified by either adding or modifying subroutines that perform specific computational tasks, and the modular-program structure allows the user to create versions of MODFE that contain only the simulation capabilities that pertain to the ground-water problem of interest. MODFE is written in a Fortran programming language that makes it virtually device independent and compatible with desk-top personal computers and large mainframes. MODFE uses computer storage and execution time efficiently by taking advantage of symmetry and sparseness within the coefficient matrices of the finite-element equations. Parts of the matrix coefficients are computed and stored as single-subscripted variables, which are assembled into a complete coefficient just prior to solution. Computer storage is reused during simulation to decrease storage requirements. Descriptions of subroutines that execute the computational steps of the modular-program structure are given in tables that cross reference the subroutines with particular versions of MODFE. Programming details of linear and nonlinear hydrologic terms are provided. Structure diagrams for the main programs show the order in which subroutines are executed for each version and illustrate some of the linear and nonlinear versions of MODFE that are possible. Computational aspects of changing stresses and boundary conditions with time and of mass-balance and error terms are given for each hydrologic feature. Program variables are listed and defined according to their occurrence in the main programs and in subroutines. Listings of the main programs and subroutines are given.

Prediction of Success in External Cephalic Version under Tocolysis: Still a Challenge.

PubMed

Vaz de Macedo, Carolina; Clode, Nuno; Mendes da Graça, Luís

2015-01-01

External cephalic version is a procedure of fetal rotation to a cephalic presentation through manoeuvres applied to the maternal abdomen. There are several prognostic factors described in literature for external cephalic version success and prediction scores have been proposed, but their true implication in clinical practice is controversial. We aim to identify possible factors that could contribute to the success of an external cephalic version attempt in our population. We retrospectively examined 207 consecutive external cephalic version attempts under tocolysis conducted between January 1997 and July 2012. We consulted the department's database for the following variables: race, age, parity, maternal body mass index, gestational age, estimated fetal weight, breech category, placental location and amniotic fluid index. We performed descriptive and analytical statistics for each variable and binary logistic regression. External cephalic version was successful in 46.9% of cases (97/207). None of the included variables was associated with the outcome of external cephalic version attempts after adjustment for confounding factors. We present a success rate similar to what has been previously described in literature. However, in contrast to previous authors, we could not associate any of the analysed variables with success of the external cephalic version attempt. We believe this discrepancy is partly related to the type of statistical analysis performed. Even though there are numerous prognostic factors identified for the success in external cephalic version, care must be taken when counselling and selecting patients for this procedure. The data obtained suggests that external cephalic version should continue being offered to all eligible patients regardless of prognostic factors for success.

Virtual Beach v2.2 User Guide

EPA Science Inventory

Virtual Beach version 2.2 (VB 2.2) is a decision support tool. It is designed to construct site-specific Multi-Linear Regression (MLR) models to predict pathogen indicator levels (or fecal indicator bacteria, FIB) at recreational beaches. MLR analysis has outperformed persisten...

Capabilities and applications of the Program to Optimize Simulated Trajectories (POST). Program summary document

NASA Technical Reports Server (NTRS)

Brauer, G. L.; Cornick, D. E.; Stevenson, R.

1977-01-01

The capabilities and applications of the three-degree-of-freedom (3DOF) version and the six-degree-of-freedom (6DOF) version of the Program to Optimize Simulated Trajectories (POST) are summarized. The document supplements the detailed program manuals by providing additional information that motivates and clarifies basic capabilities, input procedures, applications and computer requirements of these programs. The information will enable prospective users to evaluate the programs, and to determine if they are applicable to their problems. Enough information is given to enable managerial personnel to evaluate the capabilities of the programs and describes the POST structure, formulation, input and output procedures, sample cases, and computer requirements. The report also provides answers to basic questions concerning planet and vehicle modeling, simulation accuracy, optimization capabilities, and general input rules. Several sample cases are presented.

UPEML Version 3.0: A machine-portable CDC update emulator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mehlhorn, T.A.; Haill, T.A.

1992-04-01

UPEML is a machine-portable program that emulates a subset of the functions of the standard CDC Update. Machine-portability has been achieved by conforming to ANSI standards for Fortran-77. UPEML is compact and fairly efficient; however, it only allows a restricted syntax as compared with the CDC Update. This program was written primarily to facilitate the use of CDC-based scientific packages on alternate computer systems such as the VAX/VMS mainframes and UNIX workstations. UPEML has also been successfully used on the multiprocessor ELXSI, on CRAYs under both UNICOS and CTSS operating systems, and on Sun, HP, Stardent and IBM workstations. UPEMLmore » was originally released with the ITS electron/photon Monte Carlo transport package, which was developed on a CDC-7600 and makes extensive use of conditional file structure to combine several problem geometry and machine options into a single program file. UPEML 3.0 is an enhanced version of the original code and is being independently released for use at any installation or with any code package. Version 3.0 includes enhanced error checking, full ASCII character support, a program library audit capability, and a partial update option in which only selected or modified decks are written to the complete file. Version 3.0 also checks for overlapping corrections, allows processing of pested calls to common decks, and allows the use of alternate files in READ and ADDFILE commands. Finally, UPEML Version 3.0 allows the assignment of input and output files at runtime on the control line.« less

UPEML Version 3. 0: A machine-portable CDC update emulator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mehlhorn, T.A.; Haill, T.A.

1992-04-01

UPEML is a machine-portable program that emulates a subset of the functions of the standard CDC Update. Machine-portability has been achieved by conforming to ANSI standards for Fortran-77. UPEML is compact and fairly efficient; however, it only allows a restricted syntax as compared with the CDC Update. This program was written primarily to facilitate the use of CDC-based scientific packages on alternate computer systems such as the VAX/VMS mainframes and UNIX workstations. UPEML has also been successfully used on the multiprocessor ELXSI, on CRAYs under both UNICOS and CTSS operating systems, and on Sun, HP, Stardent and IBM workstations. UPEMLmore » was originally released with the ITS electron/photon Monte Carlo transport package, which was developed on a CDC-7600 and makes extensive use of conditional file structure to combine several problem geometry and machine options into a single program file. UPEML 3.0 is an enhanced version of the original code and is being independently released for use at any installation or with any code package. Version 3.0 includes enhanced error checking, full ASCII character support, a program library audit capability, and a partial update option in which only selected or modified decks are written to the complete file. Version 3.0 also checks for overlapping corrections, allows processing of pested calls to common decks, and allows the use of alternate files in READ and ADDFILE commands. Finally, UPEML Version 3.0 allows the assignment of input and output files at runtime on the control line.« less

XTALOPT version r11: An open-source evolutionary algorithm for crystal structure prediction

NASA Astrophysics Data System (ADS)

Avery, Patrick; Falls, Zackary; Zurek, Eva

2018-01-01

Version 11 of XTALOPT, an evolutionary algorithm for crystal structure prediction, has now been made available for download from the CPC library or the XTALOPT website, http://xtalopt.github.io. Whereas the previous versions of XTALOPT were published under the Gnu Public License (GPL), the current version is made available under the 3-Clause BSD License, which is an open source license that is recognized by the Open Source Initiative. Importantly, the new version can be executed via a command line interface (i.e., it does not require the use of a Graphical User Interface). Moreover, the new version is written as a stand-alone program, rather than an extension to AVOGADRO.

76 FR 65428 - Classification and Program Review

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-21

... review will be an abbreviated program review meant to focus on an inmate's programming activities. This... during his/her incarceration. The plan will ordinarily include work and programming activities to help... an inmate's programming activities. This shortened version of the more thorough program review will...

78 FR 79659 - Chronic Wasting Disease Herd Certification Program and Interstate Movement of Farmed or Captive...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-31

...We are giving notice of changes to the Program Standards for the chronic wasting disease (CWD) herd certification program. The CWD herd certification program is a voluntary, cooperative program that establishes minimum requirements for the interstate movement of farmed or captive cervids, provisions for participating States to administer Approved State CWD Herd Certification Programs, and provisions for participating herds to become certified as having a low risk of being infected with CWD. The Program Standards provide optional guidance, explanation, and clarification on how to meet the requirements for interstate movement and for the Herd Certification Programs. Recently, we convened a group of State, laboratory, and industry representatives to discuss possible changes to the current Program Standards. The revised Program Standards reflect these discussions, and we believe the revised version will improve understanding of the program among State and industry cooperators. We are making the revised version of the Program Standards available for review and comment.

The Discriminatory Ability of the Fibromyalgia Rapid Screening Tool (FiRST): An International Study in Spain and Four Latin American Countries.

PubMed

Collado, Antonio; Torres, Xavier; Messina, Osvaldo D; Vidal, Luis F; Clark, Patricia; Ríos, Carlos; Solé, Emília; Arias, Anna; Perrot, Serge; Salomon, Patricia A

2016-05-01

To assess the transcultural equivalency of the Spanish version of the Fibromyalgia Rapid Screening Tool (FiRST) and its discriminatory ability in different Latin American samples. Validation study. Departments of Rheumatology in general hospitals and private centers; fibromyalgia unit in a university hospital. 350 chronic pain patients from Spain, Argentina, Mexico, Peru, and Ecuador. The cultural relevance of the Spanish version of the FiRST was evaluated. The ability of the FiRST as a screening tool for fibromyalgia was assessed by logistic regression analysis. To determine the degree to which potential confounders, such as differences in demographics, pain, affective distress, catastrophizing, and disability, might affect the discriminatory ability, the tool was reassessed by hierarchical multivariate logistic regression. Slightly different versions of the FiRST were recommended for use in each Latin American subsample. The FiRST showed acceptable criterion validity and was able to discriminate between fibromyalgia and non-fibromyalgia patients even after controlling for the effect of potential confounders. However, low specificities were observed in samples from Spain and Mexico. The Spanish version of the FiRST may be used as a screening tool for fibromyalgia in several Latin American subsamples, even in those patients with high scores on potential confounders. In Spain and Mexico, the low specificity of the FiRST suggests, however, that it would be best used to support a suspected diagnosis of fibromyalgia, rather than to exclude the diagnosis. © 2015 American Academy of Pain Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

A parallel solver for huge dense linear systems

NASA Astrophysics Data System (ADS)

Badia, J. M.; Movilla, J. L.; Climente, J. I.; Castillo, M.; Marqués, M.; Mayo, R.; Quintana-Ortí, E. S.; Planelles, J.

2011-11-01

HDSS (Huge Dense Linear System Solver) is a Fortran Application Programming Interface (API) to facilitate the parallel solution of very large dense systems to scientists and engineers. The API makes use of parallelism to yield an efficient solution of the systems on a wide range of parallel platforms, from clusters of processors to massively parallel multiprocessors. It exploits out-of-core strategies to leverage the secondary memory in order to solve huge linear systems O(100.000). The API is based on the parallel linear algebra library PLAPACK, and on its Out-Of-Core (OOC) extension POOCLAPACK. Both PLAPACK and POOCLAPACK use the Message Passing Interface (MPI) as the communication layer and BLAS to perform the local matrix operations. The API provides a friendly interface to the users, hiding almost all the technical aspects related to the parallel execution of the code and the use of the secondary memory to solve the systems. In particular, the API can automatically select the best way to store and solve the systems, depending of the dimension of the system, the number of processes and the main memory of the platform. Experimental results on several parallel platforms report high performance, reaching more than 1 TFLOP with 64 cores to solve a system with more than 200 000 equations and more than 10 000 right-hand side vectors. New version program summaryProgram title: Huge Dense System Solver (HDSS) Catalogue identifier: AEHU_v1_1 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEHU_v1_1.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 87 062 No. of bytes in distributed program, including test data, etc.: 1 069 110 Distribution format: tar.gz Programming language: Fortran90, C Computer: Parallel architectures: multiprocessors, computer clusters Operating system: Linux/Unix Has the code been vectorized or parallelized?: Yes, includes MPI primitives. RAM: Tested for up to 190 GB Classification: 6.5 External routines: MPI ( http://www.mpi-forum.org/), BLAS ( http://www.netlib.org/blas/), PLAPACK ( http://www.cs.utexas.edu/~plapack/), POOCLAPACK ( ftp://ftp.cs.utexas.edu/pub/rvdg/PLAPACK/pooclapack.ps) (code for PLAPACK and POOCLAPACK is included in the distribution). Catalogue identifier of previous version: AEHU_v1_0 Journal reference of previous version: Comput. Phys. Comm. 182 (2011) 533 Does the new version supersede the previous version?: Yes Nature of problem: Huge scale dense systems of linear equations, Ax=B, beyond standard LAPACK capabilities. Solution method: The linear systems are solved by means of parallelized routines based on the LU factorization, using efficient secondary storage algorithms when the available main memory is insufficient. Reasons for new version: In many applications we need to guarantee a high accuracy in the solution of very large linear systems and we can do it by using double-precision arithmetic. Summary of revisions: Version 1.1 Can be used to solve linear systems using double-precision arithmetic. New version of the initialization routine. The user can choose the kind of arithmetic and the values of several parameters of the environment. Running time: About 5 hours to solve a system with more than 200 000 equations and more than 10 000 right-hand side vectors using double-precision arithmetic on an eight-node commodity cluster with a total of 64 Intel cores.

Monte Carlo Shower Counter Studies

NASA Technical Reports Server (NTRS)

Snyder, H. David

1991-01-01

Activities and accomplishments related to the Monte Carlo shower counter studies are summarized. A tape of the VMS version of the GEANT software was obtained and installed on the central computer at Gallaudet University. Due to difficulties encountered in updating this VMS version, a decision was made to switch to the UNIX version of the package. This version was installed and used to generate the set of data files currently accessed by various analysis programs. The GEANT software was used to write files of data for positron and proton showers. Showers were simulated for a detector consisting of 50 alternating layers of lead and scintillator. Each file consisted of 1000 events at each of the following energies: 0.1, 0.5, 2.0, 10, 44, and 200 GeV. Data analysis activities related to clustering, chi square, and likelihood analyses are summarized. Source code for the GEANT user subprograms and data analysis programs are provided along with example data plots.

A program for calculating photonic band structures, Green's functions and transmission/reflection coefficients using a non-orthogonal FDTD method

NASA Astrophysics Data System (ADS)

Ward, A. J.; Pendry, J. B.

2000-06-01

In this paper we present an updated version of our ONYX program for calculating photonic band structures using a non-orthogonal finite difference time domain method. This new version employs the same transparent formalism as the first version with the same capabilities for calculating photonic band structures or causal Green's functions but also includes extra subroutines for the calculation of transmission and reflection coefficients. Both the electric and magnetic fields are placed onto a discrete lattice by approximating the spacial and temporal derivatives with finite differences. This results in discrete versions of Maxwell's equations which can be used to integrate the fields forwards in time. The time required for a calculation using this method scales linearly with the number of real space points used in the discretization so the technique is ideally suited to handling systems with large and complicated unit cells.

A second generation experiment in fault-tolerant software

NASA Technical Reports Server (NTRS)

Knight, J. C.

1986-01-01

Information was collected on the efficacy of fault-tolerant software by conducting two large-scale controlled experiments. In the first, an empirical study of multi-version software (MVS) was conducted. The second experiment is an empirical evaluation of self testing as a method of error detection (STED). The purpose ot the MVS experiment was to obtain empirical measurement of the performance of multi-version systems. Twenty versions of a program were prepared at four different sites under reasonably realistic development conditions from the same specifications. The purpose of the STED experiment was to obtain empirical measurements of the performance of assertions in error detection. Eight versions of a program were modified to include assertions at two different sites under controlled conditions. The overall structure of the testing environment for the MVS experiment and its status are described. Work to date in the STED experiment is also presented.

Computerized Engineering

NASA Technical Reports Server (NTRS)

1998-01-01

In 1966, MacNeal-Schwendler Corporation (MSC) was awarded a contract by NASA to develop a general purpose structural analysis program dubbed NASTRAN (NASA structural analysis). The first operational version was delivered in 1969. In 1982, MSC procured the rights to market their subsequent version of NASTRAN to industry as a problem solver for applications ranging from acoustics to heat transfer. Known today as MSC/NASTRAN, the program has thousands of users worldwide. NASTRAN is also distributed through COSMIC.

PCACE-Personal-Computer-Aided Cabling Engineering

NASA Technical Reports Server (NTRS)

Billitti, Joseph W.

1987-01-01

PCACE computer program developed to provide inexpensive, interactive system for learning and using engineering approach to interconnection systems. Basically database system that stores information as files of individual connectors and handles wiring information in circuit groups stored as records. Directly emulates typical manual engineering methods of handling data, thus making interface between user and program very natural. Apple version written in P-Code Pascal and IBM PC version of PCACE written in TURBO Pascal 3.0

Users guide for ENVSTD program Version 2. 0 and LTGSTD program Version 2. 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crawley, D.B.; Riesen, P.K.; Briggs, R.S.

1989-02-01

On January 30, 1989, the US Department of Energy (DOE) promulgated 10 CFR Part 435, Subpart A, an Interim Rule entitled ''Energy Conservation Voluntary Performance Standards for New Commercial and Multi-Family High Rise Residential Buildings; Mandatory for New Federal Buildings.'' As a consequence, federal agencies must design all future federal commercial and multifamily high rise residential buildings in accordance with the Standards, or show that their current standards already meet or exceed the energy-efficiency requirements of the Standards. Although these newly enacted Standards do not regulate the design of nonfederal buildings, DOE recommends that all design professionals use the Standardsmore » as guidelines for designing energy-conserving buildings. To encourage private sector use, the Standards were presented in the January 30, 1989, Federal Register in the format typical of commercial standards rather than a federal regulation. As a further help, DOE supported the development of various microcomputer programs to ease the use of the Standards. Two of these programs/emdash/ENVSTD (Version 2.0) and LTGSTD (Version 2.0)/emdash/are detailed in this users guide and provided on the accompanying diskette. This package, developed by Pacific Northwest Laboratory (PNL), is intended to facilitate the designer's use of the Standards dealing specifically with a building's envelope and lighting system designs. Using these programs will greatly simplify the designer's task of performing the sometimes complex calculations needed to determine a design's compliance with the Standards. 3 refs., 6 figs.« less

Adjustment of geochemical background by robust multivariate statistics

USGS Publications Warehouse

Zhou, D.

1985-01-01

Conventional analyses of exploration geochemical data assume that the background is a constant or slowly changing value, equivalent to a plane or a smoothly curved surface. However, it is better to regard the geochemical background as a rugged surface, varying with changes in geology and environment. This rugged surface can be estimated from observed geological, geochemical and environmental properties by using multivariate statistics. A method of background adjustment was developed and applied to groundwater and stream sediment reconnaissance data collected from the Hot Springs Quadrangle, South Dakota, as part of the National Uranium Resource Evaluation (NURE) program. Source-rock lithology appears to be a dominant factor controlling the chemical composition of groundwater or stream sediments. The most efficacious adjustment procedure is to regress uranium concentration on selected geochemical and environmental variables for each lithologic unit, and then to delineate anomalies by a common threshold set as a multiple of the standard deviation of the combined residuals. Robust versions of regression and RQ-mode principal components analysis techniques were used rather than ordinary techniques to guard against distortion caused by outliers Anomalies delineated by this background adjustment procedure correspond with uranium prospects much better than do anomalies delineated by conventional procedures. The procedure should be applicable to geochemical exploration at different scales for other metals. ?? 1985.

Economics of global burden of road traffic injuries and their relationship with health system variables.

PubMed

Dalal, Koustuv; Lin, Zhiquin; Gifford, Mervyn; Svanström, Leif

2013-12-01

To estimate the economic loss due to road traffic injuries (RTIs) of the World Health Organization (WHO) member countries and to explore the relationship between the economic loss and relevant health system factors. Data from the World Bank and the WHO were applied to set up the databases. Disability-adjusted life year (DALY) and gross domestic product per capita were used to estimate the economic loss relating to RTIs. Regression analysis was used. Data were analyzed by IBM SPSS Statistics, Versions 20.0. In 2005, the total economic loss of RTIs was estimated to be 167,752.4 million United States Dollars. High income countries (HIC) showed the greatest economic losses. The majority (96%) of the top 25 countries with the greatest DALY losses are low and middle income countries while 48% of the top 25 countries with the highest economic losses are HIC. The linear regression model indicates an inverse relationship between nurse density in the health system and economic loss due to RTI. RTIs cause enormous death and DALYs loss in low-middle income countries and enormous economic loss in HIC. More road traffic prevention programs should be promoted in these areas to reduce both incidence and economic burden of RTIs.

A computer program (MACPUMP) for interactive aquifer-test analysis

USGS Publications Warehouse

Day-Lewis, F. D.; Person, M.A.; Konikow, Leonard F.

1995-01-01

This report introduces MACPUMP (Version 1.0), an aquifer-test-analysis package for use with Macintosh4 computers. The report outlines the input- data format, describes the solutions encoded in the program, explains the menu-items, and offers a tutorial illustrating the use of the program. The package reads list-directed aquifer-test data from a file, plots the data to the screen, generates and plots type curves for several different test conditions, and allows mouse-controlled curve matching. MACPUMP features pull-down menus, a simple text viewer for displaying data-files, and optional on-line help windows. This version includes the analytical solutions for nonleaky and leaky confined aquifers, using both type curves and straight-line methods, and for the analysis of single-well slug tests using type curves. An executable version of the code and sample input data sets are included on an accompanying floppy disk.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Kuo -Ling; Mehrotra, Sanjay

We present a homogeneous algorithm equipped with a modified potential function for the monotone complementarity problem. We show that this potential function is reduced by at least a constant amount if a scaled Lipschitz condition (SLC) is satisfied. A practical algorithm based on this potential function is implemented in a software package named iOptimize. The implementation in iOptimize maintains global linear and polynomial time convergence properties, while achieving practical performance. It either successfully solves the problem, or concludes that the SLC is not satisfied. When compared with the mature software package MOSEK (barrier solver version 6.0.0.106), iOptimize solves convex quadraticmore » programming problems, convex quadratically constrained quadratic programming problems, and general convex programming problems in fewer iterations. Moreover, several problems for which MOSEK fails are solved to optimality. In addition, we also find that iOptimize detects infeasibility more reliably than the general nonlinear solvers Ipopt (version 3.9.2) and Knitro (version 8.0).« less

A formative evaluation of the SWITCH® obesity prevention program: print versus online programming.

PubMed

Welk, Gregory J; Chen, Senlin; Nam, Yoon Ho; Weber, Tara E

2015-01-01

SWITCH® is an evidence-based childhood obesity prevention program that works through schools to impact parenting practices. The present study was designed as a formative evaluation to test whether an online version of SWITCH® would work equivalently as the established print version. Ten elementary schools were matched by socio-economic status and randomly assigned to receive either the print (n = 5) or online (n = 5) version. A total of 211 children from 22, 3(rd) grade classrooms were guided through the 4 month program by a team of program leaders working in cooperation with the classroom teachers. Children were tasked with completing weekly SWITCH® Trackers with their parents to monitor goal setting efforts in showing positive Do (≥60 minutes of moderate-to-vigorous physical activity), View (≤2 hours of screen time), and Chew (≥5 servings of fruits and vegetables) behaviors on each day. A total of 91 parents completed a brief survey to assess project-specific interactions with their child and the impact on their behaviors. The majority of parents (93.2%) reported satisfactory experiences with either the online or print SWITCH® program. The return rate for the SWITCH® Trackers was higher (42.5% ± 11%) from the print schools compared to the online schools (27.4% ± 10.9%). District program managers rated the level of teacher engagement in regards to program facilitation and the results showed a higher Trackers return rate in the highly engaged schools (38.5% ± 13.3%) than the lowly engaged schools (28.6 ± 11.9%). No significant differences were observed in parent/child interactions or reported behavior change (ps > .05) suggesting the equivalence in intervention effect for print and online versions of the SWITCH® program. The findings support the utility of the online SWITCH® platform but school-based modules are needed to facilitate broader school engagement by classroom teachers and PE teachers.

On the design of classifiers for crop inventories

NASA Technical Reports Server (NTRS)

Heydorn, R. P.; Takacs, H. C.

1986-01-01

Crop proportion estimators that use classifications of satellite data to correct, in an additive way, a given estimate acquired from ground observations are discussed. A linear version of these estimators is optimal, in terms of minimum variance, when the regression of the ground observations onto the satellite observations in linear. When this regression is not linear, but the reverse regression (satellite observations onto ground observations) is linear, the estimator is suboptimal but still has certain appealing variance properties. In this paper expressions are derived for those regressions which relate the intercepts and slopes to conditional classification probabilities. These expressions are then used to discuss the question of classifier designs that can lead to low-variance crop proportion estimates. Variance expressions for these estimates in terms of classifier omission and commission errors are also derived.

Insufficient acetabular version increases blood metal ion levels after metal-on-metal hip resurfacing.

PubMed

Hart, Alister J; Skinner, John A; Henckel, Johann; Sampson, Barry; Gordon, Fabiana

2011-09-01

Many factors affect the blood metal ion levels after metal-on-metal (MOM) hip arthroplasty. The main surgically adjustable variable is the amount of coverage of the head provided by the cup which is a function of the inclination and version angles. However, most studies have used plain radiographs which have questionable precision and accuracy, particularly for version and large diameter metal heads; further, these studies do not simultaneously assess version and inclination. Thus the relationship between version and blood metal ions levels has not been resolved. We determined whether cup inclination and version influence blood metal ion levels while adjusting for age at assessment, gender, body mass index, horizontal femoral offset, head size, manufacturer hip type, and Oxford hip score. We prospectively followed 100 individuals (51 females, 49 males) with unilateral MOM hip resurfacing who underwent clinical assessment, CT scanning, and blood metal ion measurement. Multiple regression analysis was used to determine which variables were predictors of blood metal ion levels and to model the effect of these variables. Only cup inclination, version angles, and gender influenced blood cobalt or chromium levels. Cobalt and chromium levels positively correlated with inclination angle and negatively correlated with version angle. The effect of changes in version angle was less than for inclination angle. Based on our observations, we developed a formula to predict the effect of these parameters on metal ion levels. Our data suggest insufficient cup version can cause high blood metal ions after MOM hip arthroplasty. We were unable to show that excessive version caused high levels. Level II, prognostic study. See Guidelines for Authors for a complete description of levels of evidence.

Chemical Education from Programs for Learning, Inc.

ERIC Educational Resources Information Center

Petrich, James A.

1981-01-01

This software review focuses on five concept-related packages of programs in the Apple version and are viewed as well-written in terms of both educational sophistication and programing expertise. (MP)

A robust ridge regression approach in the presence of both multicollinearity and outliers in the data

NASA Astrophysics Data System (ADS)

Shariff, Nurul Sima Mohamad; Ferdaos, Nur Aqilah

2017-08-01

Multicollinearity often leads to inconsistent and unreliable parameter estimates in regression analysis. This situation will be more severe in the presence of outliers it will cause fatter tails in the error distributions than the normal distributions. The well-known procedure that is robust to multicollinearity problem is the ridge regression method. This method however is expected to be affected by the presence of outliers due to some assumptions imposed in the modeling procedure. Thus, the robust version of existing ridge method with some modification in the inverse matrix and the estimated response value is introduced. The performance of the proposed method is discussed and comparisons are made with several existing estimators namely, Ordinary Least Squares (OLS), ridge regression and robust ridge regression based on GM-estimates. The finding of this study is able to produce reliable parameter estimates in the presence of both multicollinearity and outliers in the data.

The use of self checks and voting in software error detection - An empirical study

NASA Technical Reports Server (NTRS)

Leveson, Nancy G.; Cha, Stephen S.; Knight, John C.; Shimeall, Timothy J.

1990-01-01

The results of an empirical study of software error detection using self checks and N-version voting are presented. Working independently, each of 24 programmers first prepared a set of self checks using just the requirements specification of an aerospace application, and then each added self checks to an existing implementation of that specification. The modified programs were executed to measure the error-detection performance of the checks and to compare this with error detection using simple voting among multiple versions. The analysis of the checks revealed that there are great differences in the ability of individual programmers to design effective checks. It was found that some checks that might have been effective failed to detect an error because they were badly placed, and there were numerous instances of checks signaling nonexistent errors. In general, specification-based checks alone were not as effective as specification-based checks combined with code-based checks. Self checks made it possible to identify faults that had not been detected previously by voting 28 versions of the program over a million randomly generated inputs. This appeared to result from the fact that the self checks could examine the internal state of the executing program, whereas voting examines only final results of computations. If internal states had to be identical in N-version voting systems, then there would be no reason to write multiple versions.

MAGNA (Materially and Geometrically Nonlinear Analysis). Part I. Finite Element Analysis Manual.

DTIC Science & Technology

1982-12-01

provided for operating the program, modifying storage caoacity, preparing input data, estimating computer run times , and interpreting the output...7.1.3 Reserved File Names 7.1.16 7.1.4 Typical Execution Times on CDC Computers 7.1.18 7.2 CRAY PROGRAM VERSION 7.2.1 7.2.1 Job Control Language 7.2.1...7.2.2 Modification of Storage Capacity 7.2.8 7.2.3 Execution Times on the CRAY-I Computer 7.2.12 7.3 VAX PROGRAM VERSION 7.3.1 8 INPUT DATA 8.0.1 8.1

Program Processes Thermocouple Readings

NASA Technical Reports Server (NTRS)

Quave, Christine A.; Nail, William, III

1995-01-01

Digital Signal Processor for Thermocouples (DART) computer program implements precise and fast method of converting voltage to temperature for large-temperature-range thermocouple applications. Written using LabVIEW software. DART available only as object code for use on Macintosh II FX or higher-series computers running System 7.0 or later and IBM PC-series and compatible computers running Microsoft Windows 3.1. Macintosh version of DART (SSC-00032) requires LabVIEW 2.2.1 or 3.0 for execution. IBM PC version (SSC-00031) requires LabVIEW 3.0 for Windows 3.1. LabVIEW software product of National Instruments and not included with program.

Program Models A Laser Beam Focused In An Aerosol Spray

NASA Technical Reports Server (NTRS)

Barton, J. P.

1996-01-01

Monte Carlo analysis performed on packets of light. Program for Analysis of Laser Beam Focused Within Aerosol Spray (FLSPRY) developed for theoretical analysis of propagation of laser pulse optically focused within aerosol spray. Applied for example, to analyze laser ignition arrangement in which focused laser pulse used to ignite liquid aerosol fuel spray. Scattering and absorption of laser light by individual aerosol droplets evaluated by use of electromagnetic Lorenz-Mie theory. Written in FORTRAN 77 for both UNIX-based computers and DEC VAX-series computers. VAX version of program (LEW-16051). UNIX version (LEW-16065).

A distributed version of the NASA Engine Performance Program

NASA Technical Reports Server (NTRS)

Cours, Jeffrey T.; Curlett, Brian P.

1993-01-01

Distributed NEPP, a version of the NASA Engine Performance Program, uses the original NEPP code but executes it in a distributed computer environment. Multiple workstations connected by a network increase the program's speed and, more importantly, the complexity of the cases it can handle in a reasonable time. Distributed NEPP uses the public domain software package, called Parallel Virtual Machine, allowing it to execute on clusters of machines containing many different architectures. It includes the capability to link with other computers, allowing them to process NEPP jobs in parallel. This paper discusses the design issues and granularity considerations that entered into programming Distributed NEPP and presents the results of timing runs.

Influence of caregiver personality on the burden of family caregivers of terminally ill cancer patients.

PubMed

Kim, Ha-Hyun; Kim, Seon-Young; Kim, Jae-Min; Kim, Sung-Wan; Shin, Il-Seon; Shim, Hyun-Jeong; Hwang, Jun-Eul; Chung, Ik-Joo; Yoon, Jin-Sang

2016-02-01

To determine the influence of caregiver personality and other factors on the burden of family caregivers of terminally ill cancer patients. We investigated a wide range of factors related to the patient-family caregiver dyad in a palliative care setting using a cross-sectional design. Caregiver burden was assessed using the seven-item short version of the Zarit Burden Interview (ZBI-7). Caregiver personality was assessed using the 10-item short version of the Big Five Inventory (BFI-10), which measures the following five personality dimensions: extroversion, agreeableness, conscientiousness, neuroticism, and openness. Patient- and caregiver-related sociodemographic and psychological factors were included in the analysis because of their potential association with caregiver burden. Clinical patient data were obtained from medical charts or by using other measures. Multivariate linear regression analysis was performed to identify the independent factors associated with caregiver burden. We analyzed 227 patient-family caregiver dyads. The multivariate analysis revealed that caregiver extroversion was protective against caregiver burden, whereas depressive symptoms in caregivers were related to increased burden. Neuroticism was positively correlated with caregiver burden, but this relationship was nonsignificant following adjustment for depressive symptoms. Patient-related factors were not significantly associated with caregiver burden. Evaluating caregiver personality traits could facilitate identification of individuals at greater risk of high burden. Furthermore, depression screening and treatment programs for caregivers in palliative care settings are required to decrease caregiver burden.

HIPPO Unit Commitment Version 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

2017-01-17

Developed for the Midcontinent Independent System Operator, Inc. (MISO), HIPPO-Unit Commitment Version 1 is for solving security constrained unit commitment problem. The model was developed to solve MISO's cases. This version of codes includes I/O module to read in MISO's csv files, modules to create a state-based mixed integer programming formulation for solving MIP, and modules to test basic procedures to solve MIP via HPC.

FHWA traffic noise model, version 1.0 : user's guide

DOT National Transportation Integrated Search

1998-01-01

This User's Guide is for the Federal Highway Administration's Traffic Noise Model (FHWA TNM), Version 1.0 -- the FHWAs computer program for highway traffic noise prediction and analysis. Two companion reports, a Technical Manual and a data repor...

FHWA Traffic Noise Model, version 1.0 technical manual

DOT National Transportation Integrated Search

1998-02-01

This Technical Manual is for the Federal Highway Administrations Traffic Noise Model (FHWA TNM), Version 1.0 -- the FHWAs computer program for highway traffic noise prediction and analysis. Two companion reports, a Users Guide and a data r...

Does Nonlinear Modeling Play a Role in Plasmid Bioprocess Monitoring Using Fourier Transform Infrared Spectra?

PubMed

Lopes, Marta B; Calado, Cecília R C; Figueiredo, Mário A T; Bioucas-Dias, José M

2017-06-01

The monitoring of biopharmaceutical products using Fourier transform infrared (FT-IR) spectroscopy relies on calibration techniques involving the acquisition of spectra of bioprocess samples along the process. The most commonly used method for that purpose is partial least squares (PLS) regression, under the assumption that a linear model is valid. Despite being successful in the presence of small nonlinearities, linear methods may fail in the presence of strong nonlinearities. This paper studies the potential usefulness of nonlinear regression methods for predicting, from in situ near-infrared (NIR) and mid-infrared (MIR) spectra acquired in high-throughput mode, biomass and plasmid concentrations in Escherichia coli DH5-α cultures producing the plasmid model pVAX-LacZ. The linear methods PLS and ridge regression (RR) are compared with their kernel (nonlinear) versions, kPLS and kRR, as well as with the (also nonlinear) relevance vector machine (RVM) and Gaussian process regression (GPR). For the systems studied, RR provided better predictive performances compared to the remaining methods. Moreover, the results point to further investigation based on larger data sets whenever differences in predictive accuracy between a linear method and its kernelized version could not be found. The use of nonlinear methods, however, shall be judged regarding the additional computational cost required to tune their additional parameters, especially when the less computationally demanding linear methods herein studied are able to successfully monitor the variables under study.

Conceptual modeling of coincident failures in multiversion software

NASA Technical Reports Server (NTRS)

Littlewood, Bev; Miller, Douglas R.

1989-01-01

Recent work by Eckhardt and Lee (1985) shows that independently developed program versions fail dependently (specifically, simultaneous failure of several is greater than would be the case under true independence). The present authors show there is a precise duality between input choice and program choice in this model and consider a generalization in which different versions can be developed using diverse methodologies. The use of diverse methodologies is shown to decrease the probability of the simultaneous failure of several versions. Indeed, it is theoretically possible to obtain versions which exhibit better than independent failure behavior. The authors try to formalize the notion of methodological diversity by considering the sequence of decision outcomes that constitute a methodology. They show that diversity of decision implies likely diversity of behavior for the different verions developed under such forced diversity. For certain one-out-of-n systems the authors obtain an optimal method for allocating diversity between versions. For two-out-of-three systems there seem to be no simple optimality results which do not depend on constraints which cannot be verified in practice.

Power User Interface

NASA Technical Reports Server (NTRS)

Pfister, Robin; McMahon, Joe

2006-01-01

Power User Interface 5.0 (PUI) is a system of middleware, written for expert users in the Earth-science community, PUI enables expedited ordering of data granules on the basis of specific granule-identifying information that the users already know or can assemble. PUI also enables expert users to perform quick searches for orderablegranule information for use in preparing orders. PUI 5.0 is available in two versions (note: PUI 6.0 has command-line mode only): a Web-based application program and a UNIX command-line- mode client program. Both versions include modules that perform data-granule-ordering functions in conjunction with external systems. The Web-based version works with Earth Observing System Clearing House (ECHO) metadata catalog and order-entry services and with an open-source order-service broker server component, called the Mercury Shopping Cart, that is provided separately by Oak Ridge National Laboratory through the Department of Energy. The command-line version works with the ECHO metadata and order-entry process service. Both versions of PUI ultimately use ECHO to process an order to be sent to a data provider. Ordered data are provided through means outside the PUI software system.

Intimate partner violence and anxiety disorders in pregnancy: the importance of vocational training of the nursing staff in facing them1

PubMed Central

Fonseca-Machado, Mariana de Oliveira; Monteiro, Juliana Cristina dos Santos; Haas, Vanderlei José; Abrão, Ana Cristina Freitas de Vilhena; Gomes-Sponholz, Flávia

2015-01-01

Objective: to identify the relationship between posttraumatic stress disorder, trait and state anxiety, and intimate partner violence during pregnancy. Method: observational, cross-sectional study developed with 358 pregnant women. The Posttraumatic Stress Disorder Checklist - Civilian Version was used, as well as the State-Trait Anxiety Inventory and an adapted version of the instrument used in the World Health Organization Multi-country Study on Women's Health and Domestic Violence. Results: after adjusting to the multiple logistic regression model, intimate partner violence, occurred during pregnancy, was associated with the indication of posttraumatic stress disorder. The adjusted multiple linear regression models showed that the victims of violence, in the current pregnancy, had higher symptom scores of trait and state anxiety than non-victims. Conclusion: recognizing the intimate partner violence as a clinically relevant and identifiable risk factor for the occurrence of anxiety disorders during pregnancy can be a first step in the prevention thereof. PMID:26487135

MADANALYSIS 5, a user-friendly framework for collider phenomenology

NASA Astrophysics Data System (ADS)

Conte, Eric; Fuks, Benjamin; Serret, Guillaume

2013-01-01

We present MADANALYSIS 5, a new framework for phenomenological investigations at particle colliders. Based on a C++ kernel, this program allows us to efficiently perform, in a straightforward and user-friendly fashion, sophisticated physics analyses of event files such as those generated by a large class of Monte Carlo event generators. MADANALYSIS 5 comes with two modes of running. The first one, easier to handle, uses the strengths of a powerful PYTHON interface in order to implement physics analyses by means of a set of intuitive commands. The second one requires one to implement the analyses in the C++ programming language, directly within the core of the analysis framework. This opens unlimited possibilities concerning the level of complexity which can be reached, being only limited by the programming skills and the originality of the user. Program summaryProgram title: MadAnalysis 5 Catalogue identifier: AENO_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AENO_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Permission to use, copy, modify and distribute this program is granted under the terms of the GNU General Public License. No. of lines in distributed program, including test data, etc.: 31087 No. of bytes in distributed program, including test data, etc.: 399105 Distribution format: tar.gz Programming language: PYTHON, C++. Computer: All platforms on which Python version 2.7, Root version 5.27 and the g++ compiler are available. Compatibility with newer versions of these programs is also ensured. However, the Python version must be below version 3.0. Operating system: Unix, Linux and Mac OS operating systems on which the above-mentioned versions of Python and Root, as well as g++, are available. Classification: 11.1. External routines: ROOT (http://root.cern.ch/drupal/) Nature of problem: Implementing sophisticated phenomenological analyses in high-energy physics through a flexible, efficient and straightforward fashion, starting from event files such as those produced by Monte Carlo event generators. The event files can have been matched or not to parton-showering and can have been processed or not by a (fast) simulation of a detector. According to the sophistication level of the event files (parton-level, hadron-level, reconstructed-level), one must note that several input formats are possible. Solution method: We implement an interface allowing the production of predefined as well as user-defined histograms for a large class of kinematical distributions after applying a set of event selection cuts specified by the user. This therefore allows us to devise robust and novel search strategies for collider experiments, such as those currently running at the Large Hadron Collider at CERN, in a very efficient way. Restrictions: Unsupported event file format. Unusual features: The code is fully based on object representations for events, particles, reconstructed objects and cuts, which facilitates the implementation of an analysis. Running time: It depends on the purposes of the user and on the number of events to process. It varies from a few seconds to the order of the minute for several millions of events.

Simulation of ultra-high energy photon propagation with PRESHOWER 2.0

NASA Astrophysics Data System (ADS)

Homola, P.; Engel, R.; Pysz, A.; Wilczyński, H.

2013-05-01

In this paper we describe a new release of the PRESHOWER program, a tool for Monte Carlo simulation of propagation of ultra-high energy photons in the magnetic field of the Earth. The PRESHOWER program is designed to calculate magnetic pair production and bremsstrahlung and should be used together with other programs to simulate extensive air showers induced by photons. The main new features of the PRESHOWER code include a much faster algorithm applied in the procedures of simulating the processes of gamma conversion and bremsstrahlung, update of the geomagnetic field model, and a minor correction. The new simulation procedure increases the flexibility of the code so that it can also be applied to other magnetic field configurations such as, for example, encountered in the vicinity of the sun or neutron stars. Program summaryProgram title: PRESHOWER 2.0 Catalog identifier: ADWG_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADWG_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 3968 No. of bytes in distributed program, including test data, etc.: 37198 Distribution format: tar.gz Programming language: C, FORTRAN 77. Computer: Intel-Pentium based PC. Operating system: Linux or Unix. RAM:< 100 kB Classification: 1.1. Does the new version supercede the previous version?: Yes Catalog identifier of previous version: ADWG_v1_0 Journal reference of previous version: Comput. Phys. Comm. 173 (2005) 71 Nature of problem: Simulation of a cascade of particles initiated by UHE photon in magnetic field. Solution method: The primary photon is tracked until its conversion into an e+ e- pair. If conversion occurs each individual particle in the resultant preshower is checked for either bremsstrahlung radiation (electrons) or secondary gamma conversion (photons). Reasons for new version: Slow and outdated algorithm in the old version (a significant speed up is possible); Extension of the program to allow simulations also for extraterrestrial magnetic field configurations (e.g. neutron stars) and very long path lengths. Summary of revisions: A veto algorithm was introduced in the gamma conversion and bremsstrahlung tracking procedures. The length of the tracking step is now variable along the track and depends on the probability of the process expected to occur. The new algorithm reduces significantly the number of tracking steps and speeds up the execution of the program. The geomagnetic field model has been updated to IGRF-11, allowing for interpolations up to the year 2015. Numerical Recipes procedures to calculate modified Bessel functions have been replaced with an open source CERN routine DBSKA. One minor bug has been fixed. Restrictions: Gamma conversion into particles other than an electron pair is not considered. Spatial structure of the cascade is neglected. Additional comments: The following routines are supplied in the package, IGRF [1, 2], DBSKA [3], ran2 [4] Running time: 100 preshower events with primary energy 1020 eV require a 2.66 GHz CPU time of about 200 sec.; at the energy of 1021 eV, 600 sec.

Additions to Mars Global Reference Atmospheric Model (MARS-GRAM)

NASA Technical Reports Server (NTRS)

Justus, C. G.; James, Bonnie

1992-01-01

Three major additions or modifications were made to the Mars Global Reference Atmospheric Model (Mars-GRAM): (1) in addition to the interactive version, a new batch version is available, which uses NAMELIST input, and is completely modular, so that the main driver program can easily be replaced by any calling program, such as a trajectory simulation program; (2) both the interactive and batch versions now have an option for treating local-scale dust storm effects, rather than just the global-scale dust storms in the original Mars-GRAM; and (3) the Zurek wave perturbation model was added, to simulate the effects of tidal perturbations, in addition to the random (mountain wave) perturbation model of the original Mars-GRAM. A minor modification was also made which allows heights to go 'below' local terrain height and return 'realistic' pressure, density, and temperature, and not the surface values, as returned by the original Mars-GRAM. This feature will allow simulations of Mars rover paths which might go into local 'valley' areas which lie below the average height of the present, rather coarse-resolution, terrain height data used by Mars-GRAM. Sample input and output of both the interactive and batch versions of Mars-GRAM are presented.

Additions to Mars Global Reference Atmospheric Model (Mars-GRAM)

NASA Technical Reports Server (NTRS)

Justus, C. G.

1991-01-01

Three major additions or modifications were made to the Mars Global Reference Atmospheric Model (Mars-GRAM): (1) in addition to the interactive version, a new batch version is available, which uses NAMELIST input, and is completely modular, so that the main driver program can easily be replaced by any calling program, such as a trajectory simulation program; (2) both the interactive and batch versions now have an option for treating local-scale dust storm effects, rather than just the global-scale dust storms in the original Mars-GRAM; and (3) the Zurek wave perturbation model was added, to simulate the effects of tidal perturbations, in addition to the random (mountain wave) perturbation model of the original Mars-GRAM. A minor modification has also been made which allows heights to go below local terrain height and return realistic pressure, density, and temperature (not the surface values) as returned by the original Mars-GRAM. This feature will allow simulations of Mars rover paths which might go into local valley areas which lie below the average height of the present, rather coarse-resolution, terrain height data used by Mars-GRAM. Sample input and output of both the interactive and batch version of Mars-GRAM are presented.

Maxis-A rezoning and remapping code in two dimensional cylindrical geometry

NASA Astrophysics Data System (ADS)

Lin, Zhiwei; Jiang, Shaoen; Zhang, Lu; Kuang, Longyu; Li, Hang

2018-06-01

This paper presents the new version of our code Maxis (Lin et al., 2011). Maxis is a local rezoning and remapping code in two dimensional cylindrical geometry, which can be employed to address the grid distortion problem of unstructured meshes. The new version of Maxis is mostly programmed in the C language which considerably improves its computational efficiency with respect to the former Matlab version. A new algorithm for determining the intersection of two arbitrary convex polygons is also incorporated into the new version. Some additional linking functions are further provided in the new version for the purpose of combining Maxis and MULTI2D.

Computer program modifications of Open-file report 82-1065; a comprehensive system for interpreting seismic-refraction and arrival-time data using interactive computer methods

USGS Publications Warehouse

Ackermann, Hans D.; Pankratz, Leroy W.; Dansereau, Danny A.

1983-01-01

The computer programs published in Open-File Report 82-1065, A comprehensive system for interpreting seismic-refraction arrival-time data using interactive computer methods (Ackermann, Pankratz, and Dansereau, 1982), have been modified to run on a mini-computer. The new version uses approximately 1/10 of the memory of the initial version, is more efficient and gives the same results.

Analysis of the Performance of Mixed Finite Element Methods

DTIC Science & Technology

1988-11-28

with constant h is used and p is increased for accuracy. The h-p version combines the two approaches. We have studied varioius theoretical and...program PROBE IA101, developed by Noetic Tech, St. Louis [with a first release in 1985 and a second one in 19861. This program implements these versions...Vol. 606, Springer-Verlag, Berlin, 1977. A 10. B. A. Szabo, PROBE: Theoretical Manual, NOETIC Technologies, St. Louis, 1985. 4. Chronological list of

Engineering and programming manual: Two-dimensional kinetic reference computer program (TDK)

NASA Technical Reports Server (NTRS)

Nickerson, G. R.; Dang, L. D.; Coats, D. E.

1985-01-01

The Two Dimensional Kinetics (TDK) computer program is a primary tool in applying the JANNAF liquid rocket thrust chamber performance prediction methodology. The development of a methodology that includes all aspects of rocket engine performance from analytical calculation to test measurements, that is physically accurate and consistent, and that serves as an industry and government reference is presented. Recent interest in rocket engines that operate at high expansion ratio, such as most Orbit Transfer Vehicle (OTV) engine designs, has required an extension of the analytical methods used by the TDK computer program. Thus, the version of TDK that is described in this manual is in many respects different from the 1973 version of the program. This new material reflects the new capabilities of the TDK computer program, the most important of which are described.

ADS: A FORTRAN program for automated design synthesis: Version 1.10

NASA Technical Reports Server (NTRS)

Vanderplaats, G. N.

1985-01-01

A new general-purpose optimization program for engineering design is described. ADS (Automated Design Synthesis - Version 1.10) is a FORTRAN program for solution of nonlinear constrained optimization problems. The program is segmented into three levels: strategy, optimizer, and one-dimensional search. At each level, several options are available so that a total of over 100 possible combinations can be created. Examples of available strategies are sequential unconstrained minimization, the Augmented Lagrange Multiplier method, and Sequential Linear Programming. Available optimizers include variable metric methods and the Method of Feasible Directions as examples, and one-dimensional search options include polynomial interpolation and the Golden Section method as examples. Emphasis is placed on ease of use of the program. All information is transferred via a single parameter list. Default values are provided for all internal program parameters such as convergence criteria, and the user is given a simple means to over-ride these, if desired.

PSsolver: A Maple implementation to solve first order ordinary differential equations with Liouvillian solutions

NASA Astrophysics Data System (ADS)

Avellar, J.; Duarte, L. G. S.; da Mota, L. A. C. P.

2012-10-01

We present a set of software routines in Maple 14 for solving first order ordinary differential equations (FOODEs). The package implements the Prelle-Singer method in its original form together with its extension to include integrating factors in terms of elementary functions. The package also presents a theoretical extension to deal with all FOODEs presenting Liouvillian solutions. Applications to ODEs taken from standard references show that it solves ODEs which remain unsolved using Maple's standard ODE solution routines. New version program summary Program title: PSsolver Catalogue identifier: ADPR_v2_0 Program summary URL: http://cpc.cs.qub.ac.uk/summaries/ADPR_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 2302 No. of bytes in distributed program, including test data, etc.: 31962 Distribution format: tar.gz Programming language: Maple 14 (also tested using Maple 15 and 16). Computer: Intel Pentium Processor P6000, 1.86 GHz. Operating system: Windows 7. RAM: 4 GB DDR3 Memory Classification: 4.3. Catalogue identifier of previous version: ADPR_v1_0 Journal reference of previous version: Comput. Phys. Comm. 144 (2002) 46 Does the new version supersede the previous version?: Yes Nature of problem: Symbolic solution of first order differential equations via the Prelle-Singer method. Solution method: The method of solution is based on the standard Prelle-Singer method, with extensions for the cases when the FOODE contains elementary functions. Additionally, an extension of our own which solves FOODEs with Liouvillian solutions is included. Reasons for new version: The program was not running anymore due to changes in the latest versions of Maple. Additionally, we corrected/changed some bugs/details that were hampering the smoother functioning of the routines. Summary of revisions: • As time went by, many commands in Maple were deprecated. So, in order to make the program able to run with the newer versions, we have checked and changed some of those. For instance, the command sum had changed, and some program lines were substituted so that the package works properly. • In the old version we must supply the degree of the Darboux polynomials we want to determine. In the present version the user can set the degree by typing Deg = number in the command call (e.g., PSsolve(ode, Deg =3); telling the command PSsolve that it must use Darboux polynomials of degree up to three). If the user does not specify the degree, the routines use, as default, the degree 1. Restrictions: If the integrating factor for the FOODE under consideration has factors of high degree in the dependent and independent variables and in the elementary functions appearing in the FOODE, the package may spend a long time finding the solution. Also, when dealing with FOODEs containing elementary functions, it is essential that the algebraic dependency between them is recognized. If that does not happen, our program can miss some solutions. Unusual features: Our implementation of the Prelle-Singer approach not only solves FOODEs, but can also be used as a research tool that allows the user to follow all the steps of the procedure. For example, the Darboux polynomials (eigenpolynomials) of the D-operator associated with a FOODE (see Section 4) can be calculated. In addition, our package is successful in solving FOODEs that were not solved by some of the most commonly available solvers. Finally, our package implements a theoretical extension (for details, see [1,2]) to the original Prelle-Singer approach that enhances its scope, allowing it to tackle some FOODEs whose solutions involve non-elementary Liouvillian functions. Running time: This depends strongly on the FOODE, but usually under 2 seconds when running our 'arena' test file: The non linear FOODEs presented in the book by Kamke [3]. These times were obtained using an Intel Pentium Processor P6000, 1.86 GHz, with 4 GB RAM. References: [1] M. Singer, Liouvillian first integrals of differential equations, Trans. Amer. Math. Soc. 333 (1992) 673-688. [2] L.G.S. Duarte, S.E.S. Duarte, L.A.C.P. da Mota, J.E.F. Skea, A method to tackle first order ordinary differential equations with Liouvilian functions in the solution, J. Phys. A: Math. Gen. Inglaterra 35 (17) (2002) 3899-3910. [3] E. Kamke, Differentialgleichungen: Lösungsmethoden und Lösungen, Chelsea Publishing Co., New York, 1959.

Revised and extended UTILITIES for the RATIP package

NASA Astrophysics Data System (ADS)

Nikkinen, J.; Fritzsche, S.; Heinäsmäki, S.

2006-09-01

During the last years, the RATIP package has been found useful for calculating the excitation and decay properties of free atoms. Based on the (relativistic) multiconfiguration Dirac-Fock method, this program is used to obtain accurate predictions of atomic properties and to analyze many recent experiments. The daily work with this package made an extension of its UTILITIES [S. Fritzsche, Comput. Phys. Comm. 141 (2001) 163] desirable in order to facilitate the data handling and interpretation of complex spectra. For this purpose, we make available an enlarged version of the UTILITIES which mainly supports the comparison with experiment as well as large Auger computations. Altogether 13 additional tasks have been appended to the program together with a new menu structure to improve the interactive control of the program. Program summaryTitle of program: RATIP Catalogue identifier: ADPD_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADPD_v2_0 Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Licensing provisions: none Reference in CPC to previous version: S. Fritzsche, Comput. Phys. Comm. 141 (2001) 163 Catalogue identifier of previous version: ADPD Authors of previous version: S. Fritzsche, Department of Physics, University of Kassel, Heinrich-Plett-Strasse 40, D-34132 Kassel, Germany Does the new version supersede the original program?: yes Computer for which the new version is designed and others on which it has been tested: IBM RS 6000, PC Pentium II-IV Installations: University of Kassel (Germany), University of Oulu (Finland) Operating systems: IBM AIX, Linux, Unix Program language used in the new version: ANSI standard Fortran 90/95 Memory required to execute with typical data: 300 kB No. of bits in a word: All real variables are parameterized by a selected kind parameter and, thus, can be adapted to any required precision if supported by the compiler. Currently, the kind parameter is set to double precision (two 32-bit words) as used also for other components of the RATIP package [S. Fritzsche, C.F. Fischer, C.Z. Dong, Comput. Phys. Comm. 124 (2000) 341; G. Gaigalas, S. Fritzsche, Comput. Phys. Comm. 134 (2001) 86; S. Fritzsche, Comput. Phys. Comm. 141 (2001) 163; S. Fritzsche, J. Elec. Spec. Rel. Phen. 114-116 (2001) 1155] No. of lines in distributed program, including test data, etc.:231 813 No. of bytes in distributed program, including test data, etc.: 3 977 387 Distribution format: tar.gzip file Nature of the physical problem: In order to describe atomic excitation and decay properties also quantitatively, large-scale computations are often needed. In the framework of the RATIP package, the UTILITIES support a variety of (small) tasks. For example, these tasks facilitate the file and data handling in large-scale applications or in the interpretation of complex spectra. Method of solution: The revised UTILITIES now support a total of 29 subtasks which are mainly concerned with the manipulation of output data as obtained from other components of the RATIP package. Each of these tasks are realized by one or several subprocedures which have access to the corresponding modules of the main components. While the main menu defines seven groups of subtasks for data manipulations and computations, a particular task is selected from one of these group menus. This allows to enlarge the program later if technical support for further tasks will become necessary. For each selected task, an interactive dialog about the required input and output data as well as a few additional information are printed during the execution of the program. Reasons for the new version: The requirement for enlarging the previous version of the UTILITIES [S. Fritzsche, Comput. Phys. Comm. 141 (2001) 163] arose from the recent application of the RATIP package for large-scale radiative and Auger computations. A number of new subtasks now refer to the handling of Auger amplitudes and their proper combination in order to facilitate the interpretation of complex spectra. A few further tasks, such as the direct access to the one-electron matrix elements for some given set of orbital functions, have been found useful also in the analysis of data. Summary of revisions: extraction and handling of atomic data within the framework of RATIP. With the revised version, we now 'add' another 13 tasks which refer to the manipulation of data files, the generation and interpretation of Auger spectra, the computation of various one- and two-electron matrix elements as well as the evaluation of momentum densities and grid parameters. Owing to the rather large number of subtasks, the main menu has been divided into seven groups from which the individual tasks can be selected very similarly as before. Typical running time: The program responds promptly for most of the tasks. The responding time for some tasks, such as the generation of a relativistic momentum density, strongly depends on the size of the corresponding data files and the number of grid points. Unusual features of the program: A total of 29 different tasks are supported by the program. Starting from the main menu, the user is guided interactively through the program by a dialog and a few additional explanations. For each task, a short summary about its function is displayed before the program prompts for all the required input data.

Continuous-time quantum Monte Carlo impurity solvers

NASA Astrophysics Data System (ADS)

Gull, Emanuel; Werner, Philipp; Fuchs, Sebastian; Surer, Brigitte; Pruschke, Thomas; Troyer, Matthias

2011-04-01

Continuous-time quantum Monte Carlo impurity solvers are algorithms that sample the partition function of an impurity model using diagrammatic Monte Carlo techniques. The present paper describes codes that implement the interaction expansion algorithm originally developed by Rubtsov, Savkin, and Lichtenstein, as well as the hybridization expansion method developed by Werner, Millis, Troyer, et al. These impurity solvers are part of the ALPS-DMFT application package and are accompanied by an implementation of dynamical mean-field self-consistency equations for (single orbital single site) dynamical mean-field problems with arbitrary densities of states. Program summaryProgram title: dmft Catalogue identifier: AEIL_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEIL_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: ALPS LIBRARY LICENSE version 1.1 No. of lines in distributed program, including test data, etc.: 899 806 No. of bytes in distributed program, including test data, etc.: 32 153 916 Distribution format: tar.gz Programming language: C++ Operating system: The ALPS libraries have been tested on the following platforms and compilers: Linux with GNU Compiler Collection (g++ version 3.1 and higher), and Intel C++ Compiler (icc version 7.0 and higher) MacOS X with GNU Compiler (g++ Apple-version 3.1, 3.3 and 4.0) IBM AIX with Visual Age C++ (xlC version 6.0) and GNU (g++ version 3.1 and higher) compilers Compaq Tru64 UNIX with Compq C++ Compiler (cxx) SGI IRIX with MIPSpro C++ Compiler (CC) HP-UX with HP C++ Compiler (aCC) Windows with Cygwin or coLinux platforms and GNU Compiler Collection (g++ version 3.1 and higher) RAM: 10 MB-1 GB Classification: 7.3 External routines: ALPS [1], BLAS/LAPACK, HDF5 Nature of problem: (See [2].) Quantum impurity models describe an atom or molecule embedded in a host material with which it can exchange electrons. They are basic to nanoscience as representations of quantum dots and molecular conductors and play an increasingly important role in the theory of "correlated electron" materials as auxiliary problems whose solution gives the "dynamical mean field" approximation to the self-energy and local correlation functions. Solution method: Quantum impurity models require a method of solution which provides access to both high and low energy scales and is effective for wide classes of physically realistic models. The continuous-time quantum Monte Carlo algorithms for which we present implementations here meet this challenge. Continuous-time quantum impurity methods are based on partition function expansions of quantum impurity models that are stochastically sampled to all orders using diagrammatic quantum Monte Carlo techniques. For a review of quantum impurity models and their applications and of continuous-time quantum Monte Carlo methods for impurity models we refer the reader to [2]. Additional comments: Use of dmft requires citation of this paper. Use of any ALPS program requires citation of the ALPS [1] paper. Running time: 60 s-8 h per iteration.

FHWA Traffic Noise Model user's guide (version 2.0 addendum).

DOT National Transportation Integrated Search

2002-03-01

In March 1998, the Federal Highway Administration (FHWA) Office of Natural : Environment, released the FHWA Traffic Noise Model (FHWA TNM) Version 1.0, a : state-of-the-art computer program for highway traffic noise prediction and : analysis. Since t...

Carbon monoxide screen for signalized intersections : COSIM, version 4.0 - technical documentation.

DOT National Transportation Integrated Search

2013-06-01

Illinois Carbon Monoxide Screen for Intersection Modeling (COSIM) Version 3.0 is a Windows-based computer : program currently used by the Illinois Department of Transportation (IDOT) to estimate worst-case carbon : monoxide (CO) concentrations near s...

External cephalic version among women with a previous cesarean delivery: report on 36 cases and review of the literature.

PubMed

Abenhaim, Haim A; Varin, Jocelyne; Boucher, Marc

2009-01-01

Whether or not women with a previous cesarean section should be considered for an external cephalic version remains unclear. In our study, we sought to examine the relationship between a history of previous cesarean section and outcomes of external cephalic version for pregnancies at 36 completed weeks of gestation or more. Data on obstetrical history and on external cephalic version outcomes was obtained from the C.H.U. Sainte-Justine External Cephalic Version Database. Baseline clinical characteristics were compared among women with and without a history of previous cesarean section. We used logistic regression analysis to evaluate the effect of previous cesarean section on success of external cephalic version while adjusting for parity, maternal body mass index, gestational age, estimated fetal weight, and amniotic fluid index. Over a 15-year period, 1425 external cephalic versions were attempted of which 36 (2.5%) were performed on women with a previous cesarean section. Although women with a history of previous cesarean section were more likely to be older and para >2 (38.93% vs. 15.0%), there were no difference in gestational age, estimated fetal weight, and amniotic fluid index. Women with a prior cesarean section had a success rate similar to women without [50.0% vs. 51.6%, adjusted OR: 1.31 (0.48-3.59)]. Women with a previous cesarean section who undergo an external cephalic version have similar success rates than do women without. Concern about procedural success in women with a previous cesarean section is unwarranted and should not deter attempting an external cephalic version.

Detection of faults and software reliability analysis

NASA Technical Reports Server (NTRS)

Knight, J. C.

1986-01-01

Multiversion or N-version programming was proposed as a method of providing fault tolerance in software. The approach requires the separate, independent preparation of multiple versions of a piece of software for some application. Specific topics addressed are: failure probabilities in N-version systems, consistent comparison in N-version systems, descriptions of the faults found in the Knight and Leveson experiment, analytic models of comparison testing, characteristics of the input regions that trigger faults, fault tolerance through data diversity, and the relationship between failures caused by automatically seeded faults.

User's guide to PHREEQC (Version 2) : a computer program for speciation, batch-reaction, one-dimensional transport, and inverse geochemical calculations

USGS Publications Warehouse

Parkhurst, David L.; Appelo, C.A.J.

1999-01-01

PHREEQC version 2 is a computer program written in the C programming language that is designed to perform a wide variety of low-temperature aqueous geochemical calculations. PHREEQC is based on an ion-association aqueous model and has capabilities for (1) speciation and saturation-index calculations; (2) batch-reaction and one-dimensional (1D) transport calculations involving reversible reactions, which include aqueous, mineral, gas, solid-solution, surface-complexation, and ion-exchange equilibria, and irreversible reactions, which include specified mole transfers of reactants, kinetically controlled reactions, mixing of solutions, and temperature changes; and (3) inverse modeling, which finds sets of mineral and gas mole transfers that account for differences in composition between waters, within specified compositional uncertainty limits.New features in PHREEQC version 2 relative to version 1 include capabilities to simulate dispersion (or diffusion) and stagnant zones in 1D-transport calculations, to model kinetic reactions with user-defined rate expressions, to model the formation or dissolution of ideal, multicomponent or nonideal, binary solid solutions, to model fixed-volume gas phases in addition to fixed-pressure gas phases, to allow the number of surface or exchange sites to vary with the dissolution or precipitation of minerals or kinetic reactants, to include isotope mole balances in inverse modeling calculations, to automatically use multiple sets of convergence parameters, to print user-defined quantities to the primary output file and (or) to a file suitable for importation into a spreadsheet, and to define solution compositions in a format more compatible with spreadsheet programs. This report presents the equations that are the basis for chemical equilibrium, kinetic, transport, and inverse-modeling calculations in PHREEQC; describes the input for the program; and presents examples that demonstrate most of the program's capabilities.

Most Likely to Succeed: Exploring Predictor Variables for the Counselor Preparation Comprehensive Examination

ERIC Educational Resources Information Center

Hartwig, Elizabeth Kjellstrand; Van Overschelde, James P.

2016-01-01

The authors investigated predictor variables for the Counselor Preparation Comprehensive Examination (CPCE) to examine whether academic variables, demographic variables, and test version were associated with graduate counseling students' CPCE scores. Multiple regression analyses revealed all 3 variables were statistically significant predictors of…

HELAC-PHEGAS: A generator for all parton level processes

NASA Astrophysics Data System (ADS)

Cafarella, Alessandro; Papadopoulos, Costas G.; Worek, Malgorzata

2009-10-01

The updated version of the HELAC-PHEGAS event generator is presented. The matrix elements are calculated through Dyson-Schwinger recursive equations using color connection representation. Phase-space generation is based on a multichannel approach, including optimization. HELAC-PHEGAS generates parton level events with all necessary information, in the most recent Les Houches Accord format, for the study of any process within the Standard Model in hadron and lepton colliders. New version program summaryProgram title: HELAC-PHEGAS Catalogue identifier: ADMS_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADMS_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 35 986 No. of bytes in distributed program, including test data, etc.: 380 214 Distribution format: tar.gz Programming language: Fortran Computer: All Operating system: Linux Classification: 11.1, 11.2 External routines: Optionally Les Houches Accord (LHA) PDF Interface library ( http://projects.hepforge.org/lhapdf/) Catalogue identifier of previous version: ADMS_v1_0 Journal reference of previous version: Comput. Phys. Comm. 132 (2000) 306 Does the new version supersede the previous version?: Yes, partly Nature of problem: One of the most striking features of final states in current and future colliders is the large number of events with several jets. Being able to predict their features is essential. To achieve this, the calculations need to describe as accurately as possible the full matrix elements for the underlying hard processes. Even at leading order, perturbation theory based on Feynman graphs runs into computational problems, since the number of graphs contributing to the amplitude grows as n!. Solution method: Recursive algorithms based on Dyson-Schwinger equations have been developed recently in order to overcome the computational obstacles. The calculation of the amplitude, using Dyson-Schwinger recursive equations, results in a computational cost growing asymptotically as 3 n, where n is the number of particles involved in the process. Off-shell subamplitudes are introduced, for which a recursion relation has been obtained allowing to express an n-particle amplitude in terms of subamplitudes, with 1-, 2-, … up to (n-1) particles. The color connection representation is used in order to treat amplitudes involving colored particles. In the present version HELAC-PHEGAS can be used to efficiently obtain helicity amplitudes, total cross sections, parton-level event samples in LHA format, for arbitrary multiparticle processes in the Standard Model in leptonic, pp¯ and pp collisions. Reasons for new version: Substantial improvements, major functionality upgrade. Summary of revisions: Color connection representation, efficient integration over PDF via the PARNI algorithm, interface to LHAPDF, parton level events generated in the most recent LHA format, k reweighting for Parton Shower matching, numerical predictions for amplitudes for arbitrary processes for phase-space points provided by the user, new user interface and the possibility to run over computer clusters. Running time: Depending on the process studied. Usually from seconds to hours. References:A. Kanaki, C.G. Papadopoulos, Comput. Phys. Comm. 132 (2000) 306. C.G. Papadopoulos, Comput. Phys. Comm. 137 (2001) 247. URL: http://www.cern.ch/helac-phegas.

External cephalic version for breech presentation with or without spinal analgesia in nulliparous women at term: a randomized controlled trial.

PubMed

Weiniger, Carolyn F; Ginosar, Yehuda; Elchalal, Uriel; Sharon, Einav; Nokrian, Malka; Ezra, Yossef

2007-12-01

To compare the success of external cephalic version using spinal analgesia with no analgesia among nulliparas. A prospective randomized controlled trial was performed in a tertiary referral center delivery suite. Nulliparous women at term requesting external cephalic version for breech presentation were randomized to receive spinal analgesia (7.5 mg bupivacaine) or no analgesia before the external cephalic version. An experienced obstetrician performed the external cephalic version. Primary outcome was successful conversion to vertex presentation. Seventy-four women were enrolled, and 70 analyzed (36 spinal, 34 no analgesia). Successful external cephalic version occurred among 24 of 36 (66.7%) women randomized to receive spinal analgesia compared with 11 of 34 (32.4%) without, P=.004 (95% confidence interval [CI] of the difference: 0.0954-0.5513). External cephalic version with spinal analgesia resulted in a lower visual analog pain score, 1.76+/-2.74 compared with 6.84+/-3.08 without, P<.001. A secondary analysis logistic regression model demonstrated that the odds of external cephalic version success was 4.0-fold higher when performed with spinal analgesia P=.02 (95% CI, odds ratio [OR] 1.2-12.9). Complete breech presentation before attempting external cephalic version increased the odds of success 8.2-fold, P=.001 (95% CI, OR 2.2-30.3). Placental position, estimated fetal weight, and maternal weight did not contribute to the success rate when spinal analgesia was used. There were no cases of placental abruption or fetal distress. Administration of spinal analgesia significantly increases the success rate of external cephalic version among nulliparous women at term, which allows possible normal vaginal delivery. ClinicalTrials.gov, www.clinicaltrials.gov, NCT00119184 I.

An Impact Evaluation of Two Versions of a Brief Intervention Targeting Alcohol Use and Physical Activity among Adolescents

ERIC Educational Resources Information Center

Mathews, Anna E.; Werch, Chudley (CHAD); Michniewicz, Mara; Bian, Hui

2007-01-01

The purpose of the study was to evaluate the immediate impact of two new versions of the Project SPORT program, a brief one-on-one tailored consult addressing alcohol use and physical activity for adolescents. One new version was a brief interactive CD-ROM (Study one) and a second was a brief small group consultation (Study two). In study one,…

Tailoring auditory training to patient needs with single and multiple talkers: transfer-appropriate gains on a four-choice discrimination test.

PubMed

Barcroft, Joe; Sommers, Mitchell S; Tye-Murray, Nancy; Mauzé, Elizabeth; Schroy, Catherine; Spehar, Brent

2011-11-01

Our long-term objective is to develop an auditory training program that will enhance speech recognition in those situations where patients most want improvement. As a first step, the current investigation trained participants using either a single talker or multiple talkers to determine if auditory training leads to transfer-appropriate gains. The experiment implemented a 2 × 2 × 2 mixed design, with training condition as a between-participants variable and testing interval and test version as repeated-measures variables. Participants completed a computerized six-week auditory training program wherein they heard either the speech of a single talker or the speech of six talkers. Training gains were assessed with single-talker and multi-talker versions of the Four-choice discrimination test. Participants in both groups were tested on both versions. Sixty-nine adult hearing-aid users were randomly assigned to either single-talker or multi-talker auditory training. Both groups showed significant gains on both test versions. Participants who trained with multiple talkers showed greater improvement on the multi-talker version whereas participants who trained with a single talker showed greater improvement on the single-talker version. Transfer-appropriate gains occurred following auditory training, suggesting that auditory training can be designed to target specific patient needs.

A New Stochastic Equivalent Linearization Implementation for Prediction of Geometrically Nonlinear Vibrations

NASA Technical Reports Server (NTRS)

Muravyov, Alexander A.; Turner, Travis L.; Robinson, Jay H.; Rizzi, Stephen A.

1999-01-01

In this paper, the problem of random vibration of geometrically nonlinear MDOF structures is considered. The solutions obtained by application of two different versions of a stochastic linearization method are compared with exact (F-P-K) solutions. The formulation of a relatively new version of the stochastic linearization method (energy-based version) is generalized to the MDOF system case. Also, a new method for determination of nonlinear sti ness coefficients for MDOF structures is demonstrated. This method in combination with the equivalent linearization technique is implemented in a new computer program. Results in terms of root-mean-square (RMS) displacements obtained by using the new program and an existing in-house code are compared for two examples of beam-like structures.

The Portals 4.0 network programming interface.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barrett, Brian W.; Brightwell, Ronald Brian; Pedretti, Kevin

2012-11-01

This report presents a specification for the Portals 4.0 network programming interface. Portals 4.0 is intended to allow scalable, high-performance network communication between nodes of a parallel computing system. Portals 4.0 is well suited to massively parallel processing and embedded systems. Portals 4.0 represents an adaption of the data movement layer developed for massively parallel processing platforms, such as the 4500-node Intel TeraFLOPS machine. Sandias Cplant cluster project motivated the development of Version 3.0, which was later extended to Version 3.3 as part of the Cray Red Storm machine and XT line. Version 4.0 is targeted to the next generationmore » of machines employing advanced network interface architectures that support enhanced offload capabilities.« less

Nationwide summary of US Geological Survey regional regression equations for estimating magnitude and frequency of floods for ungaged sites, 1993

USGS Publications Warehouse

Jennings, M.E.; Thomas, W.O.; Riggs, H.C.

1994-01-01

For many years, the U.S. Geological Survey (USGS) has been involved in the development of regional regression equations for estimating flood magnitude and frequency at ungaged sites. These regression equations are used to transfer flood characteristics from gaged to ungaged sites through the use of watershed and climatic characteristics as explanatory or predictor variables. Generally these equations have been developed on a statewide or metropolitan area basis as part of cooperative study programs with specific State Departments of Transportation or specific cities. The USGS, in cooperation with the Federal Highway Administration and the Federal Emergency Management Agency, has compiled all the current (as of September 1993) statewide and metropolitan area regression equations into a micro-computer program titled the National Flood Frequency Program.This program includes regression equations for estimating flood-peak discharges and techniques for estimating a typical flood hydrograph for a given recurrence interval peak discharge for unregulated rural and urban watersheds. These techniques should be useful to engineers and hydrologists for planning and design applications. This report summarizes the statewide regression equations for rural watersheds in each State, summarizes the applicable metropolitan area or statewide regression equations for urban watersheds, describes the National Flood Frequency Program for making these computations, and provides much of the reference information on the extrapolation variables needed to run the program.

45 CFR 170.299 - Incorporation by reference.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Drug Programs Prescriber/Pharmacist Interface SCRIPT Standard, Implementation Guide, Version 8, Release.... (1) National Council for Prescription Drug Programs Prescriber/Pharmacist Interface SCRIPT Standard...

A new version of Scilab software package for the study of dynamical systems

NASA Astrophysics Data System (ADS)

Bordeianu, C. C.; Felea, D.; Beşliu, C.; Jipa, Al.; Grossu, I. V.

2009-11-01

This work presents a new version of a software package for the study of chaotic flows, maps and fractals [1]. The codes were written using Scilab, a software package for numerical computations providing a powerful open computing environment for engineering and scientific applications. It was found that Scilab provides various functions for ordinary differential equation solving, Fast Fourier Transform, autocorrelation, and excellent 2D and 3D graphical capabilities. The chaotic behaviors of the nonlinear dynamics systems were analyzed using phase-space maps, autocorrelation functions, power spectra, Lyapunov exponents and Kolmogorov-Sinai entropy. Various well-known examples are implemented, with the capability of the users inserting their own ODE or iterative equations. New version program summaryProgram title: Chaos v2.0 Catalogue identifier: AEAP_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEAP_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 1275 No. of bytes in distributed program, including test data, etc.: 7135 Distribution format: tar.gz Programming language: Scilab 5.1.1. Scilab 5.1.1 should be installed before running the program. Information about the installation can be found at http://wiki.scilab.org/howto/install/windows. Computer: PC-compatible running Scilab on MS Windows or Linux Operating system: Windows XP, Linux RAM: below 150 Megabytes Classification: 6.2 Catalogue identifier of previous version: AEAP_v1_0 Journal reference of previous version: Comput. Phys. Comm. 178 (2008) 788 Does the new version supersede the previous version?: Yes Nature of problem: Any physical model containing linear or nonlinear ordinary differential equations (ODE). Solution method: Numerical solving of ordinary differential equations for the study of chaotic flows. The chaotic behavior of the nonlinear dynamical system is analyzed using Poincare sections, phase-space maps, autocorrelation functions, power spectra, Lyapunov exponents and Kolmogorov-Sinai entropies. Numerical solving of iterative equations for the study of maps and fractals. Reasons for new version: The program has been updated to use the new version 5.1.1 of Scilab with new graphical capabilities [2]. Moreover, new use cases have been added which make the handling of the program easier and more efficient. Summary of revisions: A new use case concerning coupled predator-prey models has been added [3]. Three new use cases concerning fractals (Sierpinsky gasket, Barnsley's Fern and Tree) have been added [3]. The graphical user interface (GUI) of the program has been reconstructed to include the new use cases. The program has been updated to use Scilab 5.1.1 with the new graphical capabilities. Additional comments: The program package contains 12 subprograms. interface.sce - the graphical user interface (GUI) that permits the choice of a routine as follows 1.sci - Lorenz dynamical system 2.sci - Chua dynamical system 3.sci - Rosler dynamical system 4.sci - Henon map 5.sci - Lyapunov exponents for Lorenz dynamical system 6.sci - Lyapunov exponent for the logistic map 7.sci - Shannon entropy for the logistic map 8.sci - Coupled predator-prey model 1f.sci - Sierpinsky gasket 2f.sci - Barnsley's Fern 3f.sci - Barnsley's Tree Running time: 10 to 20 seconds for problems that do not involve Lyapunov exponents calculation; 60 to 1000 seconds for problems that involve high orders ODE, Lyapunov exponents calculation and fractals. References: C.C. Bordeianu, C. Besliu, Al. Jipa, D. Felea, I. V. Grossu, Comput. Phys. Comm. 178 (2008) 788. S. Campbell, J.P. Chancelier, R. Nikoukhah, Modeling and Simulation in Scilab/Scicos, Springer, 2006. R.H. Landau, M.J. Paez, C.C. Bordeianu, A Survey of Computational Physics, Introductory Computational Science, Princeton University Press, 2008.

Adherence and delivery: Implementation quality and program outcomes for the 7th grade keepin’ it REAL program

PubMed Central

Pettigrew, Jonathan; Graham, John W.; Miller-Day, Michelle; Hecht, Michael L.; Krieger, Janice L.; Shin, Young Ju

2014-01-01

Poor implementation quality (IQ) is known to reduce program effects making it important to consider IQ for evaluation and dissemination of prevention programs. However, less is known about the ways specific implementation variables relate to outcomes. In this study, two versions of the keepin’ it REAL, 7th grade drug prevention intervention were implemented in 78 classrooms in 25 schools in rural districts in Pennsylvania and Ohio. IQ was measured through observational coding of 276 videos. IQ variables included adherence to the curriculum, teacher engagement (attentiveness, enthusiasm, seriousness, clarity, positivity), student engagement (attention, participation), and a global rating of teacher delivery quality. Factor analysis showed that teacher engagement, student engagement, and delivery quality formed one factor, which was labeled delivery. A second factor was adherence to the curriculum. Self-report student surveys measured substance use, norms (beliefs about prevalence and acceptability of use), and efficacy (beliefs about one’s ability to refuse substance offers) at two waves (pretest, immediate posttest). Mixed model regression analysis which accounted for missing data and controlled for pretest levels examined implementation quality’s effects on individual level outcomes, statistically controlling for cluster level effects. Results show that when implemented well, students show positive outcomes compared to students receiving a poorly implemented program. Delivery significantly influenced substance use and norms, but not efficacy. Adherence marginally significantly predicted use and significantly predicted norms, but not efficacy. Findings underscore the importance of comprehensively measuring and accounting for IQ, particularly delivery, when evaluating prevention interventions. PMID:24442403

FHWA Traffic Noise Model version 1.1 user's guide (Addendum)

DOT National Transportation Integrated Search

2000-09-30

In March 1998, the Federal Highway Administration (FHWA) Office of Natural Environment, released the FHWA Traffic Noise Model (FHWA TNM) Version 1.0, a state-of-the-art computer program for highway traffic noise prediction and analysis. Since then, t...

45 CFR 170.455 - Testing and certification to newer versions of certain standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification... Technology may be upgraded to comply with newer versions of an adopted minimum standard accepted by the...

45 CFR 170.455 - Testing and certification to newer versions of certain standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification... Technology may be upgraded to comply with newer versions of an adopted minimum standard accepted by the...

45 CFR 170.455 - Testing and certification to newer versions of certain standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification... Technology may be upgraded to comply with newer versions of an adopted minimum standard accepted by the...

45 CFR 170.455 - Testing and certification to newer versions of certain standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification... Technology may be upgraded to comply with newer versions of an adopted minimum standard accepted by the...

45 CFR 170.455 - Testing and certification to newer versions of certain standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification... Technology may be upgraded to comply with newer versions of an adopted minimum standard accepted by the...

A numerical differentiation library exploiting parallel architectures

NASA Astrophysics Data System (ADS)

Voglis, C.; Hadjidoukas, P. E.; Lagaris, I. E.; Papageorgiou, D. G.

2009-08-01

We present a software library for numerically estimating first and second order partial derivatives of a function by finite differencing. Various truncation schemes are offered resulting in corresponding formulas that are accurate to order O(h), O(h), and O(h), h being the differencing step. The derivatives are calculated via forward, backward and central differences. Care has been taken that only feasible points are used in the case where bound constraints are imposed on the variables. The Hessian may be approximated either from function or from gradient values. There are three versions of the software: a sequential version, an OpenMP version for shared memory architectures and an MPI version for distributed systems (clusters). The parallel versions exploit the multiprocessing capability offered by computer clusters, as well as modern multi-core systems and due to the independent character of the derivative computation, the speedup scales almost linearly with the number of available processors/cores. Program summaryProgram title: NDL (Numerical Differentiation Library) Catalogue identifier: AEDG_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEDG_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 73 030 No. of bytes in distributed program, including test data, etc.: 630 876 Distribution format: tar.gz Programming language: ANSI FORTRAN-77, ANSI C, MPI, OPENMP Computer: Distributed systems (clusters), shared memory systems Operating system: Linux, Solaris Has the code been vectorised or parallelized?: Yes RAM: The library uses O(N) internal storage, N being the dimension of the problem Classification: 4.9, 4.14, 6.5 Nature of problem: The numerical estimation of derivatives at several accuracy levels is a common requirement in many computational tasks, such as optimization, solution of nonlinear systems, etc. The parallel implementation that exploits systems with multiple CPUs is very important for large scale and computationally expensive problems. Solution method: Finite differencing is used with carefully chosen step that minimizes the sum of the truncation and round-off errors. The parallel versions employ both OpenMP and MPI libraries. Restrictions: The library uses only double precision arithmetic. Unusual features: The software takes into account bound constraints, in the sense that only feasible points are used to evaluate the derivatives, and given the level of the desired accuracy, the proper formula is automatically employed. Running time: Running time depends on the function's complexity. The test run took 15 ms for the serial distribution, 0.6 s for the OpenMP and 4.2 s for the MPI parallel distribution on 2 processors.

A primer for biomedical scientists on how to execute model II linear regression analysis.

PubMed

Ludbrook, John

2012-04-01

1. There are two very different ways of executing linear regression analysis. One is Model I, when the x-values are fixed by the experimenter. The other is Model II, in which the x-values are free to vary and are subject to error. 2. I have received numerous complaints from biomedical scientists that they have great difficulty in executing Model II linear regression analysis. This may explain the results of a Google Scholar search, which showed that the authors of articles in journals of physiology, pharmacology and biochemistry rarely use Model II regression analysis. 3. I repeat my previous arguments in favour of using least products linear regression analysis for Model II regressions. I review three methods for executing ordinary least products (OLP) and weighted least products (WLP) regression analysis: (i) scientific calculator and/or computer spreadsheet; (ii) specific purpose computer programs; and (iii) general purpose computer programs. 4. Using a scientific calculator and/or computer spreadsheet, it is easy to obtain correct values for OLP slope and intercept, but the corresponding 95% confidence intervals (CI) are inaccurate. 5. Using specific purpose computer programs, the freeware computer program smatr gives the correct OLP regression coefficients and obtains 95% CI by bootstrapping. In addition, smatr can be used to compare the slopes of OLP lines. 6. When using general purpose computer programs, I recommend the commercial programs systat and Statistica for those who regularly undertake linear regression analysis and I give step-by-step instructions in the Supplementary Information as to how to use loss functions. © 2011 The Author. Clinical and Experimental Pharmacology and Physiology. © 2011 Blackwell Publishing Asia Pty Ltd.

The NASA/MSFC global reference atmospheric model: 1990 version (GRAM-90). Part 1: Technical/users manual

NASA Technical Reports Server (NTRS)

Justus, C. G.; Alyea, F. N.; Cunnold, D. M.; Jeffries, W. R., III; Johnson, D. L.

1991-01-01

A technical description of the NASA/MSFC Global Reference Atmospheric Model 1990 version (GRAM-90) is presented with emphasis on the additions and new user's manual descriptions of the program operation aspects of the revised model. Some sample results for the new middle atmosphere section and comparisons with results from a three dimensional circulation model are provided. A programmer's manual with more details for those wishing to make their own GRAM program adaptations is also presented.

Ada technology support for NASA-GSFC

NASA Technical Reports Server (NTRS)

1986-01-01

Utilization of the Ada programming language and environments to perform directorate functions was reviewed. The Mission and Data Operations Directorate Network (MNET) conversion effort was chosen as the first task for evaluation and assistance. The MNET project required the rewriting of the existing Network Control Program (NCP) in the Ada programming language. The DEC Ada compiler running on the VAX under WMS was used for the initial development efforts. Stress tests on the newly delivered version of the DEC Ada compiler were performed. The new Alsys Ada compiler was purchased for the IBM PC AT. A prevalidated version of the compiler was obtained. The compiler was then validated.

CET93 and CETPC: An interim updated version of the NASA Lewis computer program for calculating complex chemical equilibria with applications

NASA Technical Reports Server (NTRS)

Mcbride, Bonnie J.; Reno, Martin A.; Gordon, Sanford

1994-01-01

The NASA Lewis chemical equilibrium program with applications continues to be improved and updated. The latest version is CET93. This code, with smaller arrays, has been compiled for use on an IBM or IBM-compatible personal computer and is called CETPC. This report is intended to be primarily a users manual for CET93 and CETPC. It does not repeat the more complete documentation of earlier reports on the equilibrium program. Most of the discussion covers input and output files, two new options (ONLY and comments), example problems, and implementation of CETPC.

Schizophrenia illness severity is associated with reduced loss aversion.

PubMed

Currie, James; Buruju, Dheeraj; Perrin, Jennifer S; Reid, Ian C; Steele, J Douglas; Feltovich, Nick

2017-06-01

Loss aversion, whereby losses weigh more heavily than equal-sized gains, has been demonstrated in many decision-making settings. Previous research has suggested reduced loss aversion in schizophrenia, but with little evidence of a link between loss aversion and schizophrenia illness severity. In this study, 20 individuals with schizophrenia and 16 control participants, matched by age and sex, played two versions of the Iterated Prisoners' Dilemma, one version with only positive payoffs and another version in which negative payoffs were possible, with the second version being derived from the first by subtracting a constant value from all payoffs. The control group demonstrated significantly lower cooperation rates under negative payoffs, compared with the version with only positive payoffs, indicative of loss aversion. The patient group on average showed no loss aversion response. Moreover, the extent of loss aversion in patients was found to be negatively correlated with schizophrenia illness severity, with less ill patients showing loss aversion more similar to controls. Results were found to be robust to the inclusion of potential confounding factors as covariates within rigorous probit regression analyses. Reduced loss aversion is a feature of schizophrenia and related to illness severity. Copyright © 2017. Published by Elsevier B.V.

Maximum step length: relationships to age and knee and hip extensor capacities.

PubMed

Schulz, Brian W; Ashton-Miller, James A; Alexander, Neil B

2007-07-01

Maximum Step Length may be used to identify older adults at increased risk for falls. Since leg muscle weakness is a risk factor for falls, we tested the hypotheses that maximum knee and hip extension speed, strength, and power capacities would significantly correlate with Maximum Step Length and also that the "step out and back" Maximum Step Length [Medell, J.L., Alexander, N.B., 2000. A clinical measure of maximal and rapid stepping in older women. J. Gerontol. A Biol. Sci. Med. Sci. 55, M429-M433.] would also correlate with the Maximum Step Length of its two sub-tasks: stepping "out only" and stepping "back only". These sub-tasks will be referred to as versions of Maximum Step Length. Unimpaired younger (N=11, age=24[3]years) and older (N=10, age=73[5]years) women performed the above three versions of Maximum Step Length. Knee and hip extension speed, strength, and power capacities were determined on a separate day and regressed on Maximum Step Length and age group. Version and practice effects were quantified and subjective impressions of test difficulty recorded. Hypotheses were tested using linear regressions, analysis of variance, and Fisher's exact test. Maximum Step Length explained 6-22% additional variance in knee and hip extension speed, strength, and power capacities after controlling for age group. Within- and between-block and test-retest correlation values were high (>0.9) for all test versions. Shorter Maximum Step Lengths are associated with reduced knee and hip extension speed, strength, and power capacities after controlling for age. A single out-and-back step of maximal length is a feasible, rapid screening measure that may provide insight into underlying functional impairment, regardless of age.

Integrated description of agricultural field experiments and production: the ICASA version 2.0 data standards

USDA-ARS?s Scientific Manuscript database

Agricultural research increasingly seeks to quantify complex interactions of processes for a wide range of environmental conditions and crop management scenarios, leading to investigation where multiple sets of experimental data are examined using tools such as simulation and regression. The use of ...

Evaluation of the CATSIB DIF Procedure in a Pretest Setting

ERIC Educational Resources Information Center

Nandakumar, Ratna; Roussos, Louis

2004-01-01

A new procedure, CATSIB, for assessing differential item functioning (DIF) on computerized adaptive tests (CATs) is proposed. CATSIB, a modified SIBTEST procedure, matches test takers on estimated ability and controls for impact-induced Type 1 error inflation by employing a CAT version of the IBTEST "regression correction." The…

The Over-Pruning Hypothesis of Autism

ERIC Educational Resources Information Center

Thomas, Michael S. C.; Davis, Rachael; Karmiloff-Smith, Annette; Knowland, Victoria C. P.; Charman, Tony

2016-01-01

This article outlines the "over-pruning hypothesis" of autism. The hypothesis originates in a neurocomputational model of the regressive sub-type (Thomas, Knowland & Karmiloff-Smith, 2011a, 2011b). Here we develop a more general version of the over-pruning hypothesis to address heterogeneity in the timing of manifestation of ASD,…

Adolescent Domain Screening Inventory-Short Form: Development and Initial Validation

ERIC Educational Resources Information Center

Corrigan, Matthew J.

2017-01-01

This study sought to develop a short version of the ADSI, and investigate its psychometric properties. Methods: This is a secondary analysis. Analysis to determine the Cronbach's Alpha, correlations to determine concurrent criterion validity and known instrument validity and a logistic regression to determine predictive validity were conducted.…

Web-based Interspecies Correlation Estimation (Web-ICE) for Acute Toxicity: User Manual Version 3.1

EPA Science Inventory

Predictive toxicological models are integral to ecological risk assessment because data for most species are limited. Web-based Interspecies Correlation Estimation (Web-ICE) models are least square regressions that predict acute toxicity (LC50/LD50) of a chemical to a species, ge...

HWNOISE program users' guide

DOT National Transportation Integrated Search

1992-02-01

HWNOISE is a VNTSC-developed user friendly program written in : Microsoft Fortran version 4.01 for the IBM PC/AT and : compatibles to analyze acoustic data. This program is an : integral part of the Federal Highway Administration's Mobile : Noise Dat...

HWINPUT program users' guide

DOT National Transportation Integrated Search

1992-02-01

HWINPUT is a VNTSC-developed user friendly program written in : Microsoft Fortran version 4.01 for the IBM PC/AT. This program : is an integral part of the Federal Highway Administration's : Mobile Noise Data Gathering and Analysis Laboratory and is ...

Revision of FMM-Yukawa: An adaptive fast multipole method for screened Coulomb interactions

NASA Astrophysics Data System (ADS)

Zhang, Bo; Huang, Jingfang; Pitsianis, Nikos P.; Sun, Xiaobai

2010-12-01

FMM-YUKAWA is a mathematical software package primarily for rapid evaluation of the screened Coulomb interactions of N particles in three dimensional space. Since its release, we have revised and re-organized the data structure, software architecture, and user interface, for the purpose of enabling more flexible, broader and easier use of the package. The package and its documentation are available at http://www.fastmultipole.org/, along with a few other closely related mathematical software packages. New version program summaryProgram title: FMM-Yukawa Catalogue identifier: AEEQ_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEQ_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU GPL 2.0 No. of lines in distributed program, including test data, etc.: 78 704 No. of bytes in distributed program, including test data, etc.: 854 265 Distribution format: tar.gz Programming language: FORTRAN 77, FORTRAN 90, and C. Requires gcc and gfortran version 4.4.3 or later Computer: All Operating system: Any Classification: 4.8, 4.12 Catalogue identifier of previous version: AEEQ_v1_0 Journal reference of previous version: Comput. Phys. Comm. 180 (2009) 2331 Does the new version supersede the previous version?: Yes Nature of problem: To evaluate the screened Coulomb potential and force field of N charged particles, and to evaluate a convolution type integral where the Green's function is the fundamental solution of the modified Helmholtz equation. Solution method: The new version of fast multipole method (FMM) that diagonalizes the multipole-to-local translation operator is applied with the tree structure adaptive to sample particle locations. Reasons for new version: To handle much larger particle ensembles, to enable the iterative use of the subroutines in a solver, and to remove potential contention in assignments for parallelization. Summary of revisions: The software package FMM-Yukawa has been revised and re-organized in data structure, software architecture, programming methods, and user interface. The revision enables more flexible use of the package and economic use of memory resources. It consists of five stages. The initial stage (stage 1) determines, based on the accuracy requirement and FMM theory, the length of multipole expansions and the number of quadrature points for diagonalization, and loads the quadrature nodes and weights that are computed off line. Stage 2 constructs the oct-tree and interaction lists, with adaptation to the sparsity or density of particles and employing a dynamic memory allocation scheme at every tree level. Stage 3 executes the core FMM subroutine for numerical calculation of the particle interactions. The subroutine can now be used iteratively as in a solver, while the particle locations remain the same. Stage 4 releases the memory allocated in Stage 2 for the adaptive tree and interaction lists. The user can modify the iterative routine easily. When the particle locations are changed such as in a molecular dynamics simulation, stage 2 to 4 can also be used together repeatedly. The final stage releases the memory space used for the quadrature and other remaining FMM parameters. Programs at the stage level and at the user interface are re-written in the C programming language, while most of the translation and interaction operations remain in FORTRAN. As a result of the change in data structures and memory allocation, the revised package can accommodate much larger particle ensembles while maintaining the same accuracy-efficiency performance. The new version is also developed as an important precursor to its parallel counterpart on multi-core or many core processors in a shared memory programming environment. Particularly, in order to ensure mutual exclusion in concurrent updates without incurring extra latency, we have replaced all the assignment statements at a source box that put its data to multiple target boxes with assignments at every target box that gather data from source boxes. This amounts to replacing the column version of matrix-vector multiplication with the row version. The matrix here, however, is in compressive representation. Sufficient care is taken in the revision not to alter the algorithmic complexity or numerical behavior, as concurrent writing potentially takes place in the upward calculation of the multipole expansion coefficients, interactions at every level of the FMM tree, and downward calculation of the local expansion coefficients. The software modules and their compositions are also organized according to the stages they are used. Demonstration files and makefiles for merging the user routines and the library routines are provided. Restrictions: Accuracy requirement is described in terms of three or six digits. Higher multiples of three digits will be allowed in a later version. Finer decimation in digits for accuracy specification may or may not be necessary. Unusual features: Ready and friendly for customized use and instrumental in expression of concurrency and dependency for efficient parallelization. Running time: The running time depends linearly on the number N of particles, and varies with the distribution characteristics of the particle distribution. It also depends on the accuracy requirement, a higher accuracy requirement takes relatively longer time. The code outperforms the direct summation method when N⩾750.

Interactive graphics for the Macintosh: software review of FlexiGraphs.

PubMed

Antonak, R F

1990-01-01

While this product is clearly unique, its usefulness to individuals outside small business environments is somewhat limited. FlexiGraphs is, however, a reasonable first attempt to design a microcomputer software package that controls data through interactive editing within a graph. Although the graphics capabilities of mainframe programs such as MINITAB (Ryan, Joiner, & Ryan, 1981) and the graphic manipulations available through exploratory data analysis (e.g., Velleman & Hoaglin, 1981) will not be surpassed anytime soon by this program, a researcher may want to add this program to a software library containing other Macintosh statistics, drawing, and graphics programs if only to obtain the easy-to-obtain curve fitting and line smoothing options. I welcome the opportunity to review the enhanced "scientific" version of FlexiGraphs that the author of the program indicates is currently under development. An MS-DOS version of the program should be available within the year.

Hybrid Applications Of Artificial Intelligence

NASA Technical Reports Server (NTRS)

Borchardt, Gary C.

1988-01-01

STAR, Simple Tool for Automated Reasoning, is interactive, interpreted programming language for development and operation of artificial-intelligence application systems. Couples symbolic processing with compiled-language functions and data structures. Written in C language and currently available in UNIX version (NPO-16832), and VMS version (NPO-16965).

GeoGebra 3D from the Perspectives of Elementary Pre-Service Mathematics Teachers Who Are Familiar with a Number of Software Programs

ERIC Educational Resources Information Center

Baltaci, Serdal; Yildiz, Avni

2015-01-01

Each new version of the GeoGebra dynamic mathematics software goes through updates and innovations. One of these innovations is the GeoGebra 5.0 version. This version aims to facilitate 3D instruction by offering opportunities for students to analyze 3D objects. While scanning the previous studies of GeoGebra 3D, it is seen that they mainly focus…

ZCURVE 3.0: identify prokaryotic genes with higher accuracy as well as automatically and accurately select essential genes

PubMed Central

Hua, Zhi-Gang; Lin, Yan; Yuan, Ya-Zhou; Yang, De-Chang; Wei, Wen; Guo, Feng-Biao

2015-01-01

In 2003, we developed an ab initio program, ZCURVE 1.0, to find genes in bacterial and archaeal genomes. In this work, we present the updated version (i.e. ZCURVE 3.0). Using 422 prokaryotic genomes, the average accuracy was 93.7% with the updated version, compared with 88.7% with the original version. Such results also demonstrate that ZCURVE 3.0 is comparable with Glimmer 3.02 and may provide complementary predictions to it. In fact, the joint application of the two programs generated better results by correctly finding more annotated genes while also containing fewer false-positive predictions. As the exclusive function, ZCURVE 3.0 contains one post-processing program that can identify essential genes with high accuracy (generally >90%). We hope ZCURVE 3.0 will receive wide use with the web-based running mode. The updated ZCURVE can be freely accessed from http://cefg.uestc.edu.cn/zcurve/ or http://tubic.tju.edu.cn/zcurveb/ without any restrictions. PMID:25977299

CIF2Cell: Generating geometries for electronic structure programs

NASA Astrophysics Data System (ADS)

Björkman, Torbjörn

2011-05-01

The CIF2Cell program generates the geometrical setup for a number of electronic structure programs based on the crystallographic information in a Crystallographic Information Framework (CIF) file. The program will retrieve the space group number, Wyckoff positions and crystallographic parameters, make a sensible choice for Bravais lattice vectors (primitive or principal cell) and generate all atomic positions. Supercells can be generated and alloys are handled gracefully. The code currently has output interfaces to the electronic structure programs ABINIT, CASTEP, CPMD, Crystal, Elk, Exciting, EMTO, Fleur, RSPt, Siesta and VASP. Program summaryProgram title: CIF2Cell Catalogue identifier: AEIM_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEIM_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU GPL version 3 No. of lines in distributed program, including test data, etc.: 12 691 No. of bytes in distributed program, including test data, etc.: 74 933 Distribution format: tar.gz Programming language: Python (versions 2.4-2.7) Computer: Any computer that can run Python (versions 2.4-2.7) Operating system: Any operating system that can run Python (versions 2.4-2.7) Classification: 7.3, 7.8, 8 External routines: PyCIFRW [1] Nature of problem: Generate the geometrical setup of a crystallographic cell for a variety of electronic structure programs from data contained in a CIF file. Solution method: The CIF file is parsed using routines contained in the library PyCIFRW [1], and crystallographic as well as bibliographic information is extracted. The program then generates the principal cell from symmetry information, crystal parameters, space group number and Wyckoff sites. Reduction to a primitive cell is then performed, and the resulting cell is output to suitably named files along with documentation of the information source generated from any bibliographic information contained in the CIF file. If the space group symmetries is not present in the CIF file the program will fall back on internal tables, so only the minimal input of space group, crystal parameters and Wyckoff positions are required. Additional key features are handling of alloys and supercell generation. Additional comments: Currently implements support for the following general purpose electronic structure programs: ABINIT [2,3], CASTEP [4], CPMD [5], Crystal [6], Elk [7], exciting [8], EMTO [9], Fleur [10], RSPt [11], Siesta [12] and VASP [13-16]. Running time: The examples provided in the distribution take only seconds to run.

[Validation of the Spanish parent satisfaction questionnaire with neonatal hearing screening programs].

PubMed

Núñez-Batalla, Faustino; Antuña-León, Eva; González-Trelles, Teresa; Carro-Fernández, Pilar

2009-01-01

Although measuring parent satisfaction has been recommended as one of the important outcome measures in assessing the effectiveness of neonatal hearing screening programs, there are few published studies investigating this issue. To validate the Spanish version of the Parent Satisfaction Questionnaire with Neonatal Hearing Screening Program (PSQ-NHSP). 112 parents whose children had received hearing screening participated in this study. High levels of satisfaction were reported with more than 90% of parents satisfied with all aspects of the program. The psychometric properties of the Spanish version of the PSQ-NHSP were analyzed and demonstrated good internal consistency (alpha=0.75). Construct validity was indicated by a significant positive relationship between overall satisfaction and the three specific dimensions in the questionnaire. The development of a valid and reliable parent satisfaction questionnaire is important for improving hearing screening programs.

Software reliability experiments data analysis and investigation

NASA Technical Reports Server (NTRS)

Walker, J. Leslie; Caglayan, Alper K.

1991-01-01

The objectives are to investigate the fundamental reasons which cause independently developed software programs to fail dependently, and to examine fault tolerant software structures which maximize reliability gain in the presence of such dependent failure behavior. The authors used 20 redundant programs from a software reliability experiment to analyze the software errors causing coincident failures, to compare the reliability of N-version and recovery block structures composed of these programs, and to examine the impact of diversity on software reliability using subpopulations of these programs. The results indicate that both conceptually related and unrelated errors can cause coincident failures and that recovery block structures offer more reliability gain than N-version structures if acceptance checks that fail independently from the software components are available. The authors present a theory of general program checkers that have potential application for acceptance tests.

A regularization corrected score method for nonlinear regression models with covariate error.

PubMed

Zucker, David M; Gorfine, Malka; Li, Yi; Tadesse, Mahlet G; Spiegelman, Donna

2013-03-01

Many regression analyses involve explanatory variables that are measured with error, and failing to account for this error is well known to lead to biased point and interval estimates of the regression coefficients. We present here a new general method for adjusting for covariate error. Our method consists of an approximate version of the Stefanski-Nakamura corrected score approach, using the method of regularization to obtain an approximate solution of the relevant integral equation. We develop the theory in the setting of classical likelihood models; this setting covers, for example, linear regression, nonlinear regression, logistic regression, and Poisson regression. The method is extremely general in terms of the types of measurement error models covered, and is a functional method in the sense of not involving assumptions on the distribution of the true covariate. We discuss the theoretical properties of the method and present simulation results in the logistic regression setting (univariate and multivariate). For illustration, we apply the method to data from the Harvard Nurses' Health Study concerning the relationship between physical activity and breast cancer mortality in the period following a diagnosis of breast cancer. Copyright © 2013, The International Biometric Society.

Hubble Space Telescope: The GO and GTO Observing Programs. Version 1.0

NASA Technical Reports Server (NTRS)

Saha, Abhijit

1990-01-01

Selected information from the current Hubble Space Telescope (HST) science programs for the Guaranteed Time Observers (GTO's) and General Observers (GO's) is presented. Included are program abstracts, detailed listings of specific targets, and exposure information.

The portals 4.0.1 network programming interface.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barrett, Brian W.; Brightwell, Ronald Brian; Pedretti, Kevin

2013-04-01

This report presents a specification for the Portals 4.0 network programming interface. Portals 4.0 is intended to allow scalable, high-performance network communication between nodes of a parallel computing system. Portals 4.0 is well suited to massively parallel processing and embedded systems. Portals 4.0 represents an adaption of the data movement layer developed for massively parallel processing platforms, such as the 4500-node Intel TeraFLOPS machine. Sandias Cplant cluster project motivated the development of Version 3.0, which was later extended to Version 3.3 as part of the Cray Red Storm machine and XT line. Version 4.0 is targeted to the next generationmore » of machines employing advanced network interface architectures that support enhanced offload capabilities. 3« less

The English and Chinese versions of the five-level EuroQoL Group's five-dimension questionnaire (EQ-5D) were valid and reliable and provided comparable scores in Asian breast cancer patients.

PubMed

Lee, Chun Fan; Ng, Raymond; Luo, Nan; Wong, Nan Soon; Yap, Yoon Sim; Lo, Soo Kien; Chia, Whay Kuang; Yee, Alethea; Krishna, Lalit; Wong, Celest; Goh, Cynthia; Cheung, Yin Bun

2013-01-01

To examine the measurement properties of and comparability between the English and Chinese versions of the five-level EuroQoL Group's five-dimension questionnaire (EQ-5D) in breast cancer patients in Singapore. This is an observational study of 269 patients. Known-group validity and responsiveness of the EQ-5D utility index and visual analog scale (VAS) were assessed in relation to various clinical characteristics and longitudinal change in performance status, respectively. Convergent and divergent validity was examined by correlation coefficients between the EQ-5D and a breast cancer-specific instrument. Test-retest reliability was evaluated. The two language versions were compared by multiple regression analyses. For both English and Chinese versions, the EQ-5D utility index and VAS demonstrated known-group validity and convergent and divergent validity, and presented sufficient test-retest reliability (intraclass correlation = 0.72 to 0.83). The English version was responsive to changes in performance status. The Chinese version was responsive to decline in performance status, but there was no conclusive evidence about its responsiveness to improvement in performance status. In the comparison analyses of the utility index and VAS between the two language versions, borderline results were obtained, and equivalence cannot be definitely confirmed. The five-level EQ-5D is valid, responsive, and reliable in assessing health outcome of breast cancer patients. The English and Chinese versions provide comparable measurement results.

AIRPOL-4A : an introduction and user's guide.

DOT National Transportation Integrated Search

1976-01-01

This report details the mechanics of implementing the computer program AIRPOL-4A. AIRPOL-4A supersedes AIRPOL-4. The upgrade from version 4 to version 4A is a result of the new emissions guidelines contained in Supplement 5 to AP-42, April 1975, by t...

Reference manual for generation and analysis of Habitat Time Series: version II

USGS Publications Warehouse

Milhous, Robert T.; Bartholow, John M.; Updike, Marlys A.; Moos, Alan R.

1990-01-01

The selection of an instream flow requirement for water resource management often requires the review of how the physical habitat changes through time. This review is referred to as 'Time Series Analysis." The Tune Series Library (fSLIB) is a group of programs to enter, transform, analyze, and display time series data for use in stream habitat assessment. A time series may be defined as a sequence of data recorded or calculated over time. Examples might be historical monthly flow, predicted monthly weighted usable area, daily electrical power generation, annual irrigation diversion, and so forth. The time series can be analyzed, both descriptively and analytically, to understand the importance of the variation in the events over time. This is especially useful in the development of instream flow needs based on habitat availability. The TSLIB group of programs assumes that you have an adequate study plan to guide you in your analysis. You need to already have knowledge about such things as time period and time step, species and life stages to consider, and appropriate comparisons or statistics to be produced and displayed or tabulated. Knowing your destination, you must first evaluate whether TSLIB can get you there. Remember, data are not answers. This publication is a reference manual to TSLIB and is intended to be a guide to the process of using the various programs in TSLIB. This manual is essentially limited to the hands-on use of the various programs. a TSLIB use interface program (called RTSM) has been developed to provide an integrated working environment where the use has a brief on-line description of each TSLIB program with the capability to run the TSLIB program while in the user interface. For information on the RTSM program, refer to Appendix F. Before applying the computer models described herein, it is recommended that the user enroll in the short course "Problem Solving with the Instream Flow Incremental Methodology (IFIM)." This course is offered by the Aquatic Systems Branch of the National Ecology Research Center. For more information about the TSLIB software, refer to the Memorandum of Understanding. Chapter 1 provides a brief introduction to the Instream Flow Incremental Methodology and TSLIB. Other chapters in this manual provide information on the different aspects of using the models. The information contained in the other chapters includes (2) acquisition, entry, manipulation, and listing of streamflow data; (3) entry, manipulation, and listing of the habitat-versus-streamflow function; (4) transferring streamflow data; (5) water resources systems analysis; (6) generation and analysis of daily streamflow and habitat values; (7) generation of the time series of monthly habitats; (8) manipulation, analysis, and display of month time series data; and (9) generation, analysis, and display of annual time series data. Each section includes documentation for the programs therein with at least one page of information for each program, including a program description, instructions for running the program, and sample output. The Appendixes contain the following: (A) sample file formats; (B) descriptions of default filenames; (C) alphabetical summary of batch-procedure files; (D) installing and running TSLIB on a microcomputer; (E) running TSLIB on a CDC Cyber computer; (F) using the TSLIB user interface program (RTSM); and (G) running WATSTORE on the USGS Amdahl mainframe computer. The number for this version of TSLIB--Version II-- is somewhat arbitrary, as the TSLIB programs were collected into a library some time ago; but operators tended to use and manage them as individual programs. Therefore, we will consider the group of programs from the past that were only on the CDC Cyber computer as Version 0; the programs from the past that were on both the Cyber and the IBM-compatible microcomputer as Version I; and the programs contained in this reference manual as Version II.

Research in Presistent Simulation: Development of the Persistent ModSim Object-Oriented Programming Language

DTIC Science & Technology

1993-07-01

version tree is formed that permits users to go back to any previous version. There are methods for traversing the version tree of a particular...workspace. Workspace objects are linked (or nested) hierarchically into a workspace tree . Applications can set the access privileges to parts of this...workspace tree to control access (and hence change). There must be a default global workspace. Workspace objects are then allocated within the context

NextGen Weather Plan, Version 1.1

DTIC Science & Technology

2009-09-17

values of weather parameters at a station or over an area. In this paper, we often refer to aeronautical climatology, which is the application of the data...Joint Planning and Development Office NEXTGEN Weather Plan Version 1.1 Version 1.1 i September 17, 2009 Report Documentation Page Form...COVERED 00-00-2009 to 00-00-2009 4. TITLE AND SUBTITLE NextGen Weather Plan 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

Model-Driven Development for scientific computing. Computations of RHEED intensities for a disordered surface. Part I

NASA Astrophysics Data System (ADS)

Daniluk, Andrzej

2010-03-01

Scientific computing is the field of study concerned with constructing mathematical models, numerical solution techniques and with using computers to analyse and solve scientific and engineering problems. Model-Driven Development (MDD) has been proposed as a means to support the software development process through the use of a model-centric approach. This paper surveys the core MDD technology that was used to develop an application that allows computation of the RHEED intensities dynamically for a disordered surface. New version program summaryProgram title: RHEED1DProcess Catalogue identifier: ADUY_v4_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADUY_v4_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 31 971 No. of bytes in distributed program, including test data, etc.: 3 039 820 Distribution format: tar.gz Programming language: Embarcadero C++ Builder Computer: Intel Core Duo-based PC Operating system: Windows XP, Vista, 7 RAM: more than 1 GB Classification: 4.3, 7.2, 6.2, 8, 14 Catalogue identifier of previous version: ADUY_v3_0 Journal reference of previous version: Comput. Phys. Comm. 180 (2009) 2394 Does the new version supersede the previous version?: No Nature of problem: An application that implements numerical simulations should be constructed according to the CSFAR rules: clear and well-documented, simple, fast, accurate, and robust. A clearly written, externally and internally documented program is much easier to understand and modify. A simple program is much less prone to error and is more easily modified than one that is complicated. Simplicity and clarity also help make the program flexible. Making the program fast has economic benefits. It also allows flexibility because some of the features that make a program efficient can be traded off for greater accuracy. Making the program fast also has the benefit of allowing longer calculations with better resolution. The compromise between speed and accuracy has always posted one of the most troublesome challenges for the programmer. Almost all advances in numerical analysis have come about trying to reach these twin goals. Change in the basic algorithms will give greater improvements in accuracy and speed than using special numerical tricks or changing programming language. A robust program works correctly over a broad spectrum of input data. Solution method: The computational model of the program is based on the use of a dynamical diffraction theory in which the electrons are taken to be diffracted by a potential, which is periodic in the dimension perpendicular to the surface. In the case of a disordered surface we can use the proportional model of the scattering potential, in which the potential of a partially filled layer is taken to be the product of the coverage of this layer and the potential of a fully filled layer: U(θ,z)=∑ θ(t/τ)U(1,z), where U(1,z) stands for the potential for the full nth layer, and U(θ,z) the potential of the growing layer. Reasons for new version: Responding to the user feedback the RHEEDGr_09 program has been upgraded to a standard that allows carrying out computations of the RHEED intensities for a disordered surface. Also, functionality and documentation of the program have been improved. Summary of revisions:The logical structure of the Platform-Specific Model of the RHEEDGr_09 program has been modified according to the scheme showed in Fig. 1*. The class diagram in Fig. 1* is a static view of the main platform-specific elements of the RHEED1DProcess architecture. Fig. 2* provides a dynamic view by showing the creation and destruction simplistic sequence diagram for the process. Fig. 3* shows the RHEED1DProcess use case model. As can be seen in Figs. 2-3* the RHEED1DProcess has been designed as a slave process that runs as a separate thread inside each transaction generated by the master Growth09 program (see pii:S0010-4655(09)00386-5 A. Daniluk, Model-Driven Development for scientific computing. Computations of RHEED intensities for a disordered surface. Part II The RHEED1DProcess requires the user to provide the appropriate parameters for the crystal structure under investigation. These parameters are loaded from the parameters.ini file at run-time. Instructions on the preparation of the .ini files can be found in the new distribution. The RHEED1DProcess requires the user to provide the appropriate values of the layers of coverage profiles. The CoverageProfiles.dat file (generated by Growth09 master application) at run-time loads these values. The RHEED1DProcess enables carrying out one-dimensional dynamical calculations for the fcc lattice, with a two-atoms basis and fcc lattice, with one atom basis but yet the zeroth Fourier component of the scattering potential in the TRHEED1D::crystPotUg() function can be modified according to users' specific application requirements. * The figures mentioned can be downloaded, see "Supplementary material" below. Unusual features: The program is distributed in the form of main projects RHEED1DProcess.cbproj and Graph2D0x.cbproj with associated files, and should be compiled using Embarcadero RAD Studio 2010 along with Together visual-modelling platform. The program should be compiled with English/USA regional and language options. Additional comments: This version of the RHEED program is designed to run in conjunction with the GROWTH09 (ADVL_v3_0) program. It does not replace the previous, stand alone, RHEEDGR-09 (ADUY_v3_0) version. Running time: The typical running time is machine and user-parameters dependent. References:[1] OMG, Model Driven Architecture Guide Version 1.0.1, 2003.

The relationship of problematic internet use with dissociation among South Korean internet users.

PubMed

Lee, Tae Kyung; Roh, Sungwon; Han, Joo Hyun; Park, Se Jin; Soh, Min A; Han, Doug Hyun; Shaffer, Howard J

2016-07-30

This study examined patterns of problematic internet use (PIU) among South Korean internet users to investigate the association between PIU and dissociative experiences. Five hundred and eight participants between 20 and 49 years old were recruited through an online panel survey. Using logistic regression analysis with PIU as the dependent variable, we observed that the participants with PIU were more likely to have alcohol-related behaviors or problems, higher levels of perceived stress, and dissociative experiences. Participants' scores on the Korean version of the Dissociative Experiences Scale were positively correlated with the severity of PIU. Individuals with PIU and dissociation had more severe PIU and more severe mental-health problems than those with PIU but without dissociation. These findings suggest that treatment programs for persons with PIU should focus on helping them tolerate negative affect and increase their level of awareness to prevent the occurrence of dissociative experiences. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Healthy Living Behaviors Among Chinese-American Preschool-Aged Children: Results of a Parent Survey.

PubMed

Chomitz, Virginia Rall; Brown, Alison; Lee, Victoria; Must, Aviva; Chui, Kenneth Kwan Ho

2017-07-17

Associations between diet, physical activity, parenting, and acculturation among Chinese-American children are understudied. Parents/caregivers of children attending child-care programs in Boston Chinatown completed a self-administered survey on demographics, child's diet, physical activities, anthropometrics, and parenting practices. Associations were evaluated in multivariable regression analysis, stratified by survey language preference, a proxy for acculturation. Responding Asian families = 132; 86.4% were immigrants; 75.8% completed the Chinese-version survey. Children (mean ± SD: 4.9 ± 1.1 years) did not eat vegetables (31.8%), or play actively outside (45.4%) daily, 64.8% watched television/screens daily; 32.6% were overweight/obese (based on parent report). Parenting practices associated with obesity were apparent. Although healthy-living behavioral outcomes were less prevalent among less acculturated parents; multivariable adjustment attenuated the observed significant differences. Findings suggest opportunities for improvement in study children's diet and healthy-living behaviors, and underscore the need for further research on acculturation, and parenting styles in this population.

Exposure to Psychosocial Risk Factors at Work and the Incidence of Occupational Injuries: A Cohort Study in Spain.

PubMed

Julià, Mireia; Catalina-Romero, Carlos; Calvo-Bonacho, Eva; Benavides, Fernando G

2016-03-01

The aim of this study is to analyze the association between the exposure to psychosocial risk factors at work and the incidence of occupational injuries (OIs). A prospective dynamic cohort study (n = 16,693) of 1-year follow-up. Psychosocial risk factors at work were assessed with the Spanish version of Copenhagen Psychosocial Questionnaire. Incidence rates of OI per 1000 workers-year were calculated and associations between psychosocial risk factors and OI were estimated by Poisson regression models. Unfavorable levels of esteem in men [rate ratio (RR) = 1.28], and unfavorable levels of social support and quality of leadership (RR = 1.87), psychological demands (RR = 2.20), and active work and possibilities for development (RR = 1.83) among women, were associated with OI incidence. Poor quality of psychosocial work environment increases the incidence of OI. Psychosocial intervention programs could be helpful in order to reduce OI incidence rates and their associated costs.

Improvements to the adaptive maneuvering logic program

NASA Technical Reports Server (NTRS)

Burgin, George H.

1986-01-01

The Adaptive Maneuvering Logic (AML) computer program simulates close-in, one-on-one air-to-air combat between two fighter aircraft. Three important improvements are described. First, the previously available versions of AML were examined for their suitability as a baseline program. The selected program was then revised to eliminate some programming bugs which were uncovered over the years. A listing of this baseline program is included. Second, the equations governing the motion of the aircraft were completely revised. This resulted in a model with substantially higher fidelity than the original equations of motion provided. It also completely eliminated the over-the-top problem, which occurred in the older versions when the AML-driven aircraft attempted a vertical or near vertical loop. Third, the requirements for a versatile generic, yet realistic, aircraft model were studied and implemented in the program. The report contains detailed tables which make the generic aircraft to be either a modern, high performance aircraft, an older high performance aircraft, or a previous generation jet fighter.

International Translation of Project EX: A Teen Tobacco Use Cessation Program.

PubMed

Sussman, Steve

2012-10-01

There are relatively few documented teen tobacco use cessation efforts outside the United States (U.S.). Project EX is an evidence-based program that consists of eight sessions, as a school-based clinic tobacco cessation-only version and a classroom-based prevention and cessation version. This paper provides a 'snapshot' of progress on international translation of ProjectEXpilot study work in eight countries that have been approached thus far. The program was implemented in Wuhan, China; Israel and partners; Bashkortostan, Russia; and Elche, Spain. Implementation is planned for Vienna, Austria; Mumbai, India; and Bangkok, Thailand. This work will lead eventually to a greater understanding regarding preference for type of programming (e.g., clinic versus classroom modality), challenges in recruitment and retention, program receptivity, and short-term (approximately 3-month post-program) quit rates. Convenience samples are being recruited based on previous contacts with each location. A protocol was sent to each location, proposing a controlled design, in which subjects enter cessation groups or become a wait-list control, with an immediate pretest, posttest, and 3-month follow-up. Language translation of program materials was completed in seven of the eight locations. Several variations in design and implementation were demanded though. For example, youth fear of reporting tobacco publicly mandated to researchers that the prevention/cessation classroom version be implemented in some locations (Israel and partners, and India). Program effects are suggested across countries. Ongoing partnerships with parties actively involved in tobacco control facilitate pilot testing of teen tobacco use cessation programming. The Project EX curriculum appears quite translatable, though having flexibility in implementation modality eased being able to pilot test the program. Research on this cognitive-behavioral, motivation enhancement approach continues.

International Translation of Project EX: A Teen Tobacco Use Cessation Program

PubMed Central

Sussman, Steve

2013-01-01

Aims There are relatively few documented teen tobacco use cessation efforts outside the United States (U.S.). Project EX is an evidence-based program that consists of eight sessions, as a school-based clinic tobacco cessation-only version and a classroom-based prevention and cessation version. This paper provides a ‘snapshot’ of progress on international translation of ProjectEXpilot study work in eight countries that have been approached thus far. The program was implemented in Wuhan, China; Israel and partners; Bashkortostan, Russia; and Elche, Spain. Implementation is planned for Vienna, Austria; Mumbai, India; and Bangkok, Thailand. This work will lead eventually to a greater understanding regarding preference for type of programming (e.g., clinic versus classroom modality), challenges in recruitment and retention, program receptivity, and short-term (approximately 3-month post-program) quit rates. Protocol and Interim Results of International Translation of Project EX Convenience samples are being recruited based on previous contacts with each location. A protocol was sent to each location, proposing a controlled design, in which subjects enter cessation groups or become a wait-list control, with an immediate pretest, posttest, and 3-month follow-up. Language translation of program materials was completed in seven of the eight locations. Several variations in design and implementation were demanded though. For example, youth fear of reporting tobacco publicly mandated to researchers that the prevention/cessation classroom version be implemented in some locations (Israel and partners, and India). Program effects are suggested across countries. Conclusions Ongoing partnerships with parties actively involved in tobacco control facilitate pilot testing of teen tobacco use cessation programming. The Project EX curriculum appears quite translatable, though having flexibility in implementation modality eased being able to pilot test the program. Research on this cognitive-behavioral, motivation enhancement approach continues. PMID:23885135

Earth observing system. Output data products and input requirements, version 2.0. Volume 1: Instrument data product characteristics

NASA Technical Reports Server (NTRS)

Lu, Yun-Chi; Chang, Hyo Duck; Krupp, Brian; Kumar, Ravindra; Swaroop, Anand

1992-01-01

Information on Earth Observing System (EOS) output data products and input data requirements that has been compiled by the Science Processing Support Office (SPSO) at GSFC is presented. Since Version 1.0 of the SPSO Report was released in August 1991, there have been significant changes in the EOS program. In anticipation of a likely budget cut for the EOS Project, NASA HQ restructured the EOS program. An initial program consisting of two large platforms was replaced by plans for multiple, smaller platforms, and some EOS instruments were either deselected or descoped. Updated payload information reflecting the restructured EOS program superseding the August 1991 version of the SPSO report is included. This report has been expanded to cover information on non-EOS data products, and consists of three volumes (Volumes 1, 2, and 3). Volume 1 provides information on instrument outputs and input requirements. Volume 2 is devoted to Interdisciplinary Science (IDS) outputs and input requirements, including the 'best' and 'alternative' match analysis. Volume 3 provides information about retrieval algorithms, non-EOS input requirements of instrument teams and IDS investigators, and availability of non-EOS data products at seven primary Distributed Active Archive Centers (DAAC's).

GENXICC2.1: An improved version of GENXICC for hadronic production of doubly heavy baryons

NASA Astrophysics Data System (ADS)

Wang, Xian-You; Wu, Xing-Gang

2013-03-01

We present an improved version of GENXICC, which is a generator for hadronic production of the doubly heavy baryons Ξcc, Ξbc and Ξbb and has been introduced by C.H. Chang, J.X. Wang and X.G. Wu [Comput. Phys. Commun. 177 (2007) 467; Comput. Phys. Commun. 181 (2010) 1144]. In comparison with the previous GENXICC versions, we update the program in order to generate the unweighted baryon events more effectively under various simulation environments, whose distributions are now generated according to the probability proportional to the integrand. One Les Houches Event (LHE) common block has been added to produce a standard LHE data file that contains useful information of the doubly heavy baryon and its accompanying partons. Such LHE data can be conveniently imported into PYTHIA to do further hadronization and decay simulation, especially, the color-flow problem can be solved with PYTHIA8.0. NEW VERSION PROGRAM SUMMARYTitle of program: GENXICC2.1 Program obtained from: CPC Program Library Reference to original program: GENXICC Reference in CPC: Comput. Phys. Commun. 177, 467 (2007); Comput. Phys. Commun. 181, 1144 (2010) Does the new version supersede the old program: No Computer: Any LINUX based on PC with FORTRAN 77 or FORTRAN 90 and GNU C compiler as well Operating systems: LINUX Programming language used: FORTRAN 77/90 Memory required to execute with typical data: About 2.0 MB No. of bytes in distributed program: About 2 MB, including PYTHIA6.4 Distribution format: .tar.gz Nature of physical problem: Hadronic production of doubly heavy baryons Ξcc, Ξbc and Ξbb. Method of solution: The upgraded version with a proper interface to PYTHIA can generate full production and decay events, either weighted or unweighted, conveniently and effectively. Especially, the unweighted events are generated by using an improved hit-and-miss approach. Reasons for new version: Responding to the feedback from users of CMS and LHCb groups at the Large Hadron Collider, and based on the recent improvements of PYTHIA on the color-flow problem, we improve the efficiency for generating the unweighted events, and also improve the color-flow part for further hadronization. Especially, an interface has been added to import the output production events into a suitable form for PYTHIA8.0 simulation, in which the color-flow during the simulation can be correctly set. Typical running time: It depends on which option is chosen to match PYTHIA when generating the full events and also on which mechanism is chosen to generate the events. Typically, for the dominant gluon-gluon fusion mechanism to generate the mixed events via the intermediate diquarks in (cc)[3S1]3¯ and (cc)[1S0]6 states, setting IDWTUP=3 and unwght =.true., it takes 30 min to generate 105 unweighted events on a 2.27 GHz Intel Xeon E5520 processor machine; setting IDWTUP=3 and unwght =.false. or IDWTUP=1 and IGENERATE=0, it only needs 2 min to generate the 105 baryon events (the fastest way, for theoretical purposes only). As a comparison, for previous GENXICC versions, if setting IDWTUP=1 and IGENERATE=1, it takes about 22 hours to generate 1000 unweighted events. Keywords: Event generator; Doubly heavy baryons; Hadronic production. Summary of the changes (improvements): (1) The scheme for generating unweighted events has been improved; (2) One Les Houches Event (LHE) common block has been added to record the standard LHE data in order to be the correct input for PYTHIA8.0 for later simulation; (3) We present the code for connecting GENXICC to PYTHIA8.0, where three color-flows have to be correctly set for later simulation. More specifically, we present the changes together with their detailed explanations in the following:

Experimental field test of proposed anti-dart-out training programs. Volume 2, Implementation guidelines and program materials

DOT National Transportation Integrated Search

1981-12-01

This report (Volume 2 of three volumes) provides detailed descriptions of all program materials employed with the recommended version of a child pedestrian safety program. Volume 1 of this report describes the conduct and results of the evaluation of...

Experimental field test of proposed anti-dart-out training programs. Volume 3, Program staff training materials and videotape/film

DOT National Transportation Integrated Search

1981-12-01

This report (Volume 3 of three volumes) provides detailed descriptions of additional program materials suggested for use with the recommended version of a child pedestrian safety program. Volume 1 of this report describes the conduct and results of t...

Experimental field test of proposed anti-dart-out training programs. Volume 1, Conduct and results

DOT National Transportation Integrated Search

1981-12-01

This report describes the conduct and results of an evaluation of a child pedestrian anti-dart-out training program. Two versions were tested: A film program and a film/simulator program. Before/after accident and street crossing behavior data were c...

The Effects of Dubbing Versus Subtitling of Television Program.

ERIC Educational Resources Information Center

Mokhtar, Fattawi B.

The purpose of this study was to investigate viewers' knowledge of program content under various television translation modes and viewing experiences. Subjects were 176 students from the Center for Matriculation Program, Universiti Sains Malaysia in Penang, Malaysia. The Spanish version of an instructional television program was used; the program…

A short generic measure of work stress in the era of globalization: effort-reward imbalance.

PubMed

Siegrist, Johannes; Wege, Natalia; Pühlhofer, Frank; Wahrendorf, Morten

2009-08-01

We evaluate psychometric properties of a short version of the original effort-reward imbalance (ERI) questionnaire. This measure is of interest in the context of assessing stressful work conditions in the era of economic globalization. In a representative sample of 10,698 employed men and women participating in the longitudinal Socio-Economic Panel (SOEP) in Germany, a short version of the ERI questionnaire was included in the 2006 panel wave. Structural equation modeling and logistic regression analysis were applied. In addition to satisfactory internal consistency of scales, a model representing the theoretical structure of the scales provided the best data fit in a competitive test (RMSEA = 0.059, CAIC = 4124.19). Scoring high on the ERI scales was associated with elevated risks of poor self-rated health. This short version of the ERI questionnaire reveals satisfactory psychometric properties, and can be recommended for further use in research and practice.

Negotiating Multicollinearity with Spike-and-Slab Priors.

PubMed

Ročková, Veronika; George, Edward I

2014-08-01

In multiple regression under the normal linear model, the presence of multicollinearity is well known to lead to unreliable and unstable maximum likelihood estimates. This can be particularly troublesome for the problem of variable selection where it becomes more difficult to distinguish between subset models. Here we show how adding a spike-and-slab prior mitigates this difficulty by filtering the likelihood surface into a posterior distribution that allocates the relevant likelihood information to each of the subset model modes. For identification of promising high posterior models in this setting, we consider three EM algorithms, the fast closed form EMVS version of Rockova and George (2014) and two new versions designed for variants of the spike-and-slab formulation. For a multimodal posterior under multicollinearity, we compare the regions of convergence of these three algorithms. Deterministic annealing versions of the EMVS algorithm are seen to substantially mitigate this multimodality. A single simple running example is used for illustration throughout.

75 FR 37443 - National Toxicology Program (NTP); NTP Interagency Center for the Evaluation of Alternative...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-29

... Nonradioactive Versions of the Murine Local Lymph Node Assay for Assessing Allergic Contact Dermatitis Hazard... nonradioactive versions of the Local Lymph Node Assay (LLNA) for assessing allergic contact dermatitis (ACD... Nonradioactive Alternative Test Method to Assess the Allergic Contact Dermatitis Potential of Chemicals and...

Evaluating an Abbreviated Version of the Paths Curriculum Implemented by School Mental Health Clinicians

ERIC Educational Resources Information Center

Gibson, Jennifer E.; Werner, Shelby S.; Sweeney, Andrew

2015-01-01

When evidence-based prevention programs are implemented in schools, adaptations are common. It is important to understand which adaptations can be made while maintaining positive outcomes for students. This preliminary study evaluated an abbreviated version of the Promoting Alternative Thinking Strategies (PATHS) Curriculum implemented by…

Marketing and the Low Income Consumer.

ERIC Educational Resources Information Center

Bureau of Domestic Commerce (DOC), Washington, DC.

This is a revised version of a 1969 bibliography dealing with the characteristics of the market system serving low-income consumers, with programs designed to improve the market system and with problems in low income marketing. This version contains 326 classified, annotated entries. The bibliography covers the following major areas: (1)…

What's New with MS Office Suites

ERIC Educational Resources Information Center

Goldsborough, Reid

2012-01-01

If one buys a new PC, laptop, or netbook computer today, it probably comes preloaded with Microsoft Office 2010 Starter Edition. This is a significantly limited, advertising-laden version of Microsoft's suite of productivity programs, Microsoft Office. This continues the trend of PC makers providing ever more crippled versions of Microsoft's…

MEASUREMENT AND PRECISION, EXPERIMENTAL VERSION.

ERIC Educational Resources Information Center

Harvard Univ., Cambridge, MA. Harvard Project Physics.

THIS DOCUMENT IS AN EXPERIMENTAL VERSION OF A PROGRAMED TEXT ON MEASUREMENT AND PRECISION. PART I CONTAINS 24 FRAMES DEALING WITH PRECISION AND SIGNIFICANT FIGURES ENCOUNTERED IN VARIOUS MATHEMATICAL COMPUTATIONS AND MEASUREMENTS. PART II BEGINS WITH A BRIEF SECTION ON EXPERIMENTAL DATA, COVERING SUCH POINTS AS (1) ESTABLISHING THE ZERO POINT, (2)…

Darton College Customized Nursing Program for the Fort Benning Community and Research Project

DTIC Science & Technology

2013-10-01

Netbook /laptop versions of English 1102, Communication 1101, PSYC 2115 and PHED 1161 will be developed for deployed students with limited or no...internet accessibility. Netbook /laptop versions of English 1102, Communication 1101, PSYC, and PHED 1161 for deployed students with limited or no

75 FR 74025 - Procedural Manual for the Election Assistance Commission's Voting System Testing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-30

... System Testing and Certification Program, Version 2.0 AGENCY: United States Election Assistance Commission (EAC). ACTION: Notice; publication of Voting System Testing and Certification Manual, Version 2.0, for 60 day public comment period on EAC Web site. SUMMARY: The U.S. Election Assistance Commission...

DATAMAP upgrade version 4.0

NASA Technical Reports Server (NTRS)

Watts, Michael E.; Dejpour, Shabob R.

1989-01-01

The changes made on the data analysis and management program DATAMAP (Data from Aeromechanics Test and Analytics - Management and Analysis Package) are detailed. These changes are made to Version 3.07 (released February, 1981) and are called Version 4.0. Version 4.0 improvements were performed by Sterling Software under contract to NASA Ames Research Center. The increased capabilities instituted in this version include the breakout of the source code into modules for ease of modification, addition of a more accurate curve fit routine, ability to handle higher frequency data, additional data analysis features, and improvements in the functionality of existing features. These modification will allow DATAMAP to be used on more data sets and will make future modifications and additions easier to implement.

An Expert-System-Like Feedback Approach in the hp-Version of the Finite Element Method.

DTIC Science & Technology

1986-05-01

and, besides some research codes, the authors know of only two commercial programs based on the p-version. These are the computer program PROBE ( Noetic ...assumptions. Let us first study the problem of the best approximation on the interval I=(-1,1) . Let for E < 1 (x + X - for x > 0 for x and let W(a,E,x) = (x...Comp. and Maths. with Appls., 5, pp. 99-115, 1979. [𔃼] Szabo, B., PROBE: Theoretical Manual, NOETIC Technology Corporation, 7980 Clayton Road, Suite 205

Predictors of Better Self-Care in Patients with Heart Failure after Six Months of Follow-Up Home Visits

PubMed Central

Trojahn, Melina Maria; Ruschel, Karen Brasil; Nogueira de Souza, Emiliane; Mussi, Cláudia Motta; Naomi Hirakata, Vânia; Nogueira Mello Lopes, Alexandra; Rabelo-Silva, Eneida Rejane

2013-01-01

This study aimed to examine the predictors of better self-care behavior in patients with heart failure (HF) in a home visiting program. This is a longitudinal study nested in a randomized controlled trial (ISRCTN01213862) in which the home-based educational intervention consisted of a six-month followup that included four home visits by a nurse, interspersed with four telephone calls. The self-care score was measured at baseline and at six months using the Brazilian version of the European Heart Failure Self-Care Behaviour Scale. The associations included eight variables: age, sex, schooling, having received the intervention, social support, income, comorbidities, and symptom severity. A simple linear regression model was developed using significant variables (P ≤ 0.20), followed by a multivariate model to determine the predictors of better self-care. One hundred eighty-eight patients completed the study. A better self-care behavior was associated with patients who received intervention (P < 0.001), had more years of schooling (P = 0.016), and had more comorbidities (P = 0.008). Having received the intervention (P < 0.001) and having a greater number of comorbidities (P = 0.038) were predictors of better self-care. In the multivariate regression model, being in the intervention group and having more comorbidities were a predictor of better self-care. PMID:24083023

Epidemiologic programs for computers and calculators. A microcomputer program for multiple logistic regression by unconditional and conditional maximum likelihood methods.

PubMed

Campos-Filho, N; Franco, E L

1989-02-01

A frequent procedure in matched case-control studies is to report results from the multivariate unmatched analyses if they do not differ substantially from the ones obtained after conditioning on the matching variables. Although conceptually simple, this rule requires that an extensive series of logistic regression models be evaluated by both the conditional and unconditional maximum likelihood methods. Most computer programs for logistic regression employ only one maximum likelihood method, which requires that the analyses be performed in separate steps. This paper describes a Pascal microcomputer (IBM PC) program that performs multiple logistic regression by both maximum likelihood estimation methods, which obviates the need for switching between programs to obtain relative risk estimates from both matched and unmatched analyses. The program calculates most standard statistics and allows factoring of categorical or continuous variables by two distinct methods of contrast. A built-in, descriptive statistics option allows the user to inspect the distribution of cases and controls across categories of any given variable.

Cost-effectiveness analysis of the diarrhea alleviation through zinc and oral rehydration therapy (DAZT) program in rural Gujarat India: an application of the net-benefit regression framework.

PubMed

Shillcutt, Samuel D; LeFevre, Amnesty E; Fischer-Walker, Christa L; Taneja, Sunita; Black, Robert E; Mazumder, Sarmila

2017-01-01

This study evaluates the cost-effectiveness of the DAZT program for scaling up treatment of acute child diarrhea in Gujarat India using a net-benefit regression framework. Costs were calculated from societal and caregivers' perspectives and effectiveness was assessed in terms of coverage of zinc and both zinc and Oral Rehydration Salt. Regression models were tested in simple linear regression, with a specified set of covariates, and with a specified set of covariates and interaction terms using linear regression with endogenous treatment effects was used as the reference case. The DAZT program was cost-effective with over 95% certainty above $5.50 and $7.50 per appropriately treated child in the unadjusted and adjusted models respectively, with specifications including interaction terms being cost-effective with 85-97% certainty. Findings from this study should be combined with other evidence when considering decisions to scale up programs such as the DAZT program to promote the use of ORS and zinc to treat child diarrhea.

Reliability and Validity of the Chinese Version of the Solution-Focused Inventory in College Students

ERIC Educational Resources Information Center

Yang, Hongfei; Hai, Tang

2015-01-01

The psychometrics of the Chinese Solution-Focused Inventory (CSFI) was studied in Chinese college students. Confirmatory factor analysis confirmed the 3-factor structure. All subscales showed good reliability and convergent and incremental validity. Results of hierarchical regression analyses indicated that the 3 subscales accounted for additional…

Constrained and Unconstrained Partial Adjacent Category Logit Models for Ordinal Response Variables

ERIC Educational Resources Information Center

Fullerton, Andrew S.; Xu, Jun

2018-01-01

Adjacent category logit models are ordered regression models that focus on comparisons of adjacent categories. These models are particularly useful for ordinal response variables with categories that are of substantive interest. In this article, we consider unconstrained and constrained versions of the partial adjacent category logit model, which…

NASA TLX: software for assessing subjective mental workload.

PubMed

Cao, Alex; Chintamani, Keshav K; Pandya, Abhilash K; Ellis, R Darin

2009-02-01

The NASA Task Load Index (TLX) is a popular technique for measuring subjective mental workload. It relies on a multidimensional construct to derive an overall workload score based on a weighted average of ratings on six subscales: mental demand, physical demand, temporal demand, performance, effort, and frustration level. A program for implementing a computerized version of the NASA TLX is described. The software version assists in simplifying collection, postprocessing, and storage of raw data. The program collects raw data from the subject and calculates the weighted (or unweighted) workload score, which is output to a text file. The program can also be tailored to a specific experiment using a simple input text file, if desired. The program was designed in Visual Studio 2005 and is capable of running on a Pocket PC with Windows CE or on a PC with Windows 2000 or higher. The NASA TLX program is available for free download.

Social cognition intervention in schizophrenia: Description of the training of affect recognition program - Indian version.

PubMed

Thonse, Umesh; Behere, Rishikesh V; Frommann, Nicole; Sharma, Psvn

2018-01-01

Social cognition refers to mental operations involved in processing of social cues and includes the domains of emotion processing, Theory of Mind (ToM), social perception, social knowledge and attributional bias. Significant deficits in ToM, emotion perception and social perception have been demonstrated in schizophrenia which can have an impact on socio-occupational functioning. Intervention modules for social cognition have demonstrated moderate effect sizes for improving emotion identification and discrimination. We describe the Indian version of the Training of Affect Recognition (TAR) program and a pilot study to demonstrate the feasibility of administering this intervention program in the Indian population. We also discuss the cultural sensibilities in adopting an intervention program for the Indian setting. To the best of our knowledge this is the first intervention program for social cognition for use in persons with schizophrenia in India. Copyright © 2017 Elsevier B.V. All rights reserved.

C-Language Integrated Production System, Version 6.0

NASA Technical Reports Server (NTRS)

Riley, Gary; Donnell, Brian; Ly, Huyen-Anh Bebe; Ortiz, Chris

1995-01-01

C Language Integrated Production System (CLIPS) computer programs are specifically intended to model human expertise or other knowledge. CLIPS is designed to enable research on, and development and delivery of, artificial intelligence on conventional computers. CLIPS 6.0 provides cohesive software tool for handling wide variety of knowledge with support for three different programming paradigms: rule-based, object-oriented, and procedural. Rule-based programming: representation of knowledge as heuristics - essentially, rules of thumb that specify set of actions performed in given situation. Object-oriented programming: modeling of complex systems comprised of modular components easily reused to model other systems or create new components. Procedural-programming: representation of knowledge in ways similar to those of such languages as C, Pascal, Ada, and LISP. Version of CLIPS 6.0 for IBM PC-compatible computers requires DOS v3.3 or later and/or Windows 3.1 or later.

Application to graduate psychology programs by undergraduate students of color: the impact of a research training program.

PubMed

Hall, Gordon C Nagayama; Allard, Carolyn B

2009-07-01

The top 86 students were selected from a pool of approximately 400 applicants to a summer clinical psychology research training program for undergraduate students of color. Forty-three of the students were randomly assigned to 1 of 2 clinical psychology research training programs, and 43 were randomly assigned to a control condition without training. The multicultural version of the training program emphasized the cultural context of psychology in all areas of training, whereas cultural context was de-emphasized in the monocultural version of the program. Although the cultural content of the 2 training programs was effectively manipulated as indicated by a fidelity check by an outside expert, there were no significant differences between the effects of the 2 programs on the outcomes measured in this study. The primary differences in this study were between students who did versus those who did not participate in a training program. Sixty-five percent of the students who completed the multicultural training program applied to graduate schools in psychology, compared with 47% of those who completed the monocultural training program, and 31% of those in the control group. Participation in summer research training programs also increased self-perceptions of multicultural competence.

Regression modeling of ground-water flow

USGS Publications Warehouse

Cooley, R.L.; Naff, R.L.

1985-01-01

Nonlinear multiple regression methods are developed to model and analyze groundwater flow systems. Complete descriptions of regression methodology as applied to groundwater flow models allow scientists and engineers engaged in flow modeling to apply the methods to a wide range of problems. Organization of the text proceeds from an introduction that discusses the general topic of groundwater flow modeling, to a review of basic statistics necessary to properly apply regression techniques, and then to the main topic: exposition and use of linear and nonlinear regression to model groundwater flow. Statistical procedures are given to analyze and use the regression models. A number of exercises and answers are included to exercise the student on nearly all the methods that are presented for modeling and statistical analysis. Three computer programs implement the more complex methods. These three are a general two-dimensional, steady-state regression model for flow in an anisotropic, heterogeneous porous medium, a program to calculate a measure of model nonlinearity with respect to the regression parameters, and a program to analyze model errors in computed dependent variables such as hydraulic head. (USGS)

Logo Talks Back.

ERIC Educational Resources Information Center

Bearden, Donna; Muller, Jim

1983-01-01

In addition to turtle graphics, the Logo programing language has list and text processing capabilities that open up opportunities for word games, language programs, word processing, and other applications. Provided are examples of these applications using both Apple and MIT Logo versions. Includes sample interactive programs. (JN)

COOL: A code for Dynamic Monte Carlo Simulation of molecular dynamics

NASA Astrophysics Data System (ADS)

Barletta, Paolo

2012-02-01

Cool is a program to simulate evaporative and sympathetic cooling for a mixture of two gases co-trapped in an harmonic potential. The collisions involved are assumed to be exclusively elastic, and losses are due to evaporation from the trap. Each particle is followed individually in its trajectory, consequently properties such as spatial densities or energy distributions can be readily evaluated. The code can be used sequentially, by employing one output as input for another run. The code can be easily generalised to describe more complicated processes, such as the inclusion of inelastic collisions, or the possible presence of more than two species in the trap. New version program summaryProgram title: COOL Catalogue identifier: AEHJ_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEHJ_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 1 097 733 No. of bytes in distributed program, including test data, etc.: 18 425 722 Distribution format: tar.gz Programming language: C++ Computer: Desktop Operating system: Linux RAM: 500 Mbytes Classification: 16.7, 23 Catalogue identifier of previous version: AEHJ_v1_0 Journal reference of previous version: Comput. Phys. Comm. 182 (2011) 388 Does the new version supersede the previous version?: Yes Nature of problem: Simulation of the sympathetic process occurring for two molecular gases co-trapped in a deep optical trap. Solution method: The Direct Simulation Monte Carlo method exploits the decoupling, over a short time period, of the inter-particle interaction from the trapping potential. The particle dynamics is thus exclusively driven by the external optical field. The rare inter-particle collisions are considered with an acceptance/rejection mechanism, that is, by comparing a random number to the collisional probability defined in terms of the inter-particle cross section and centre-of-mass energy. All particles in the trap are individually simulated so that at each time step a number of useful quantities, such as the spatial densities or the energy distributions, can be readily evaluated. Reasons for new version: A number of issues made the old version very difficult to be ported on different architectures, and impossible to compile on Windows. Furthermore, the test runs results could only be replicated poorly, as a consequence of the simulations being very sensitive to the machine background noise. In practise, as the particles are simulated for billions and billions of steps, the consequence of a small difference in the initial conditions due to the finiteness of double precision real can have macroscopic effects in the output. This is not a problem in its own right, but a feature of such simulations. However, for sake of completeness we have introduced a quadruple precision version of the code which yields the same results independently of the software used to compile it, or the hardware architecture where the code is run. Summary of revisions: A number of bugs in the dynamic memory allocation have been detected and removed, mostly in the cool.cpp file. All files have been renamed with a .cpp ending, rather than .c++, to make them compatible with Windows. The Random Number Generator routine, which is the computational core of the algorithm, has been re-written in C++, and there is no need any longer for cross FORTRAN-C++ compilation. A quadruple precision version of the code is provided alongside the original double precision one. The makefile allows the user to choose which one to compile by setting the switch PRECISION to either double or quad. The source code and header files have been organised into directories to make the code file system look neater. Restrictions: The in-trap motion of the particles is treated classically. Running time: The running time is relatively short, 1-2 hours. However it is convenient to replicate each simulation several times with different initialisations of the random sequence.

Space Shuttle Main Engine performance analysis

NASA Technical Reports Server (NTRS)

Santi, L. Michael

1993-01-01

For a number of years, NASA has relied primarily upon periodically updated versions of Rocketdyne's power balance model (PBM) to provide space shuttle main engine (SSME) steady-state performance prediction. A recent computational study indicated that PBM predictions do not satisfy fundamental energy conservation principles. More recently, SSME test results provided by the Technology Test Bed (TTB) program have indicated significant discrepancies between PBM flow and temperature predictions and TTB observations. Results of these investigations have diminished confidence in the predictions provided by PBM, and motivated the development of new computational tools for supporting SSME performance analysis. A multivariate least squares regression algorithm was developed and implemented during this effort in order to efficiently characterize TTB data. This procedure, called the 'gains model,' was used to approximate the variation of SSME performance parameters such as flow rate, pressure, temperature, speed, and assorted hardware characteristics in terms of six assumed independent influences. These six influences were engine power level, mixture ratio, fuel inlet pressure and temperature, and oxidizer inlet pressure and temperature. A BFGS optimization algorithm provided the base procedure for determining regression coefficients for both linear and full quadratic approximations of parameter variation. Statistical information relative to data deviation from regression derived relations was also computed. A new strategy for integrating test data with theoretical performance prediction was also investigated. The current integration procedure employed by PBM treats test data as pristine and adjusts hardware characteristics in a heuristic manner to achieve engine balance. Within PBM, this integration procedure is called 'data reduction.' By contrast, the new data integration procedure, termed 'reconciliation,' uses mathematical optimization techniques, and requires both measurement and balance uncertainty estimates. The reconciler attempts to select operational parameters that minimize the difference between theoretical prediction and observation. Selected values are further constrained to fall within measurement uncertainty limits and to satisfy fundamental physical relations (mass conservation, energy conservation, pressure drop relations, etc.) within uncertainty estimates for all SSME subsystems. The parameter selection problem described above is a traditional nonlinear programming problem. The reconciler employs a mixed penalty method to determine optimum values of SSME operating parameters associated with this problem formulation.

MULGRES: a computer program for stepwise multiple regression analysis

Treesearch

A. Jeff Martin

1971-01-01

MULGRES is a computer program source deck that is designed for multiple regression analysis employing the technique of stepwise deletion in the search for most significant variables. The features of the program, along with inputs and outputs, are briefly described, with a note on machine compatibility.

Ada (Trade Name) Compiler Validation Summary Report. Harris Corporation, HARRIS Ada Compiler, Version 1.0, Harris H1200 and H800.

DTIC Science & Technology

1987-04-30

AiBI 895 ADA (TRADENNANE) COMPILER VALIDATION SUMMARY REPORT / HARRIS CORPORATION HA (U) INFORMATION SYSTEMS AND TECHNOLOGY CENTER W-P AFS OH ADA...Compiler Validation Summary Report : 30 APR 1986 to 30 APR 1987 Harris Corporation, HARRIS Ada Compiler, Version 1.0, Harris H1200 and H800 6...the United States Government (Ada Joint Program Office). Adae Compiler Validation mary Report : Compiler Name: HARRIS Ada Compiler, Version 1.0 1 Host

Aviation Data Integration System

NASA Technical Reports Server (NTRS)

Kulkarni, Deepak; Wang, Yao; Windrem, May; Patel, Hemil; Keller, Richard

2003-01-01

During the analysis of flight data and safety reports done in ASAP and FOQA programs, airline personnel are not able to access relevant aviation data for a variety of reasons. We have developed the Aviation Data Integration System (ADIS), a software system that provides integrated heterogeneous data to support safety analysis. Types of data available in ADIS include weather, D-ATIS, RVR, radar data, and Jeppesen charts, and flight data. We developed three versions of ADIS to support airlines. The first version has been developed to support ASAP teams. A second version supports FOQA teams, and it integrates aviation data with flight data while keeping identification information inaccessible. Finally, we developed a prototype that demonstrates the integration of aviation data into flight data analysis programs. The initial feedback from airlines is that ADIS is very useful in FOQA and ASAP analysis.

Menu-Driven Solver Of Linear-Programming Problems

NASA Technical Reports Server (NTRS)

Viterna, L. A.; Ferencz, D.

1992-01-01

Program assists inexperienced user in formulating linear-programming problems. A Linear Program Solver (ALPS) computer program is full-featured LP analysis program. Solves plain linear-programming problems as well as more-complicated mixed-integer and pure-integer programs. Also contains efficient technique for solution of purely binary linear-programming problems. Written entirely in IBM's APL2/PC software, Version 1.01. Packed program contains licensed material, property of IBM (copyright 1988, all rights reserved).

Integrated analysis of DNA-methylation and gene expression using high-dimensional penalized regression: a cohort study on bone mineral density in postmenopausal women.

PubMed

Lien, Tonje G; Borgan, Ørnulf; Reppe, Sjur; Gautvik, Kaare; Glad, Ingrid Kristine

2018-03-07

Using high-dimensional penalized regression we studied genome-wide DNA-methylation in bone biopsies of 80 postmenopausal women in relation to their bone mineral density (BMD). The women showed BMD varying from severely osteoporotic to normal. Global gene expression data from the same individuals was available, and since DNA-methylation often affects gene expression, the overall aim of this paper was to include both of these omics data sets into an integrated analysis. The classical penalized regression uses one penalty, but we incorporated individual penalties for each of the DNA-methylation sites. These individual penalties were guided by the strength of association between DNA-methylations and gene transcript levels. DNA-methylations that were highly associated to one or more transcripts got lower penalties and were therefore favored compared to DNA-methylations showing less association to expression. Because of the complex pathways and interactions among genes, we investigated both the association between DNA-methylations and their corresponding cis gene, as well as the association between DNA-methylations and trans-located genes. Two integrating penalized methods were used: first, an adaptive group-regularized ridge regression, and secondly, variable selection was performed through a modified version of the weighted lasso. When information from gene expressions was integrated, predictive performance was considerably improved, in terms of predictive mean square error, compared to classical penalized regression without data integration. We found a 14.7% improvement in the ridge regression case and a 17% improvement for the lasso case. Our version of the weighted lasso with data integration found a list of 22 interesting methylation sites. Several corresponded to genes that are known to be important in bone formation. Using BMD as response and these 22 methylation sites as covariates, least square regression analyses resulted in R 2 =0.726, comparable to an average R 2 =0.438 for 10000 randomly selected groups of DNA-methylations with group size 22. Two recent types of penalized regression methods were adapted to integrate DNA-methylation and their association to gene expression in the analysis of bone mineral density. In both cases predictions clearly benefit from including the additional information on gene expressions.

Version 3.0 of EMINERS - Economic Mineral Resource Simulator

USGS Publications Warehouse

Duval, Joseph S.

2012-01-01

Quantitative mineral resource assessment, as developed by the U.S. Geological Survey (USGS), consists of three parts: (1) development of grade and tonnage mineral deposit models; (2) delineation of tracts permissive for each deposit type; and (3) probabilistic estimation of the numbers of undiscovered deposits for each deposit type. The estimate of the number of undiscovered deposits at different levels of probability is the input to the EMINERS (Economic Mineral Resource Simulator) program. EMINERS uses a Monte Carlo statistical process to combine probabilistic estimates of undiscovered mineral deposits with models of mineral deposit grade and tonnage to estimate mineral resources. Version 3.0 of the EMINERS program is available as this USGS Open-File Report 2004-1344. Changes from version 2.0 include updating 87 grade and tonnage models, designing new templates to produce graphs showing cumulative distribution and summary tables, and disabling economic filters. The economic filters were disabled because embedded data for costs of labor and materials, mining techniques, and beneficiation methods are out of date. However, the cost algorithms used in the disabled economic filters are still in the program and available for reference for mining methods and milling techniques. The release notes included with this report give more details on changes in EMINERS over the years. EMINERS is written in C++ and depends upon the Microsoft Visual C++ 6.0 programming environment. The code depends heavily on the use of Microsoft Foundation Classes (MFC) for implementation of the Windows interface. The program works only on Microsoft Windows XP or newer personal computers. It does not work on Macintosh computers. For help in using the program in this report, see the "Quick-Start Guide for Version 3.0 of EMINERS-Economic Mineral Resource Simulator" (W.J. Bawiec and G.T. Spanski, 2012, USGS Open-File Report 2009-1057, linked at right). It demonstrates how to execute EMINERS software using default settings and existing deposit models.

PAN AIR: A computer program for predicting subsonic or supersonic linear potential flows about arbitrary configurations using a higher order panel method. Volume 4: Maintenance document (version 3.0)

NASA Technical Reports Server (NTRS)

Purdon, David J.; Baruah, Pranab K.; Bussoletti, John E.; Epton, Michael A.; Massena, William A.; Nelson, Franklin D.; Tsurusaki, Kiyoharu

1990-01-01

The Maintenance Document Version 3.0 is a guide to the PAN AIR software system, a system which computes the subsonic or supersonic linear potential flow about a body of nearly arbitrary shape, using a higher order panel method. The document describes the overall system and each program module of the system. Sufficient detail is given for program maintenance, updating, and modification. It is assumed that the reader is familiar with programming and CRAY computer systems. The PAN AIR system was written in FORTRAN 4 language except for a few CAL language subroutines which exist in the PAN AIR library. Structured programming techniques were used to provide code documentation and maintainability. The operating systems accommodated are COS 1.11, COS 1.12, COS 1.13, and COS 1.14 on the CRAY 1S, 1M, and X-MP computing systems. The system is comprised of a data base management system, a program library, an execution control module, and nine separate FORTRAN technical modules. Each module calculates part of the posed PAN AIR problem. The data base manager is used to communicate between modules and within modules. The technical modules must be run in a prescribed fashion for each PAN AIR problem. In order to ease the problem of supplying the many JCL cards required to execute the modules, a set of CRAY procedures (PAPROCS) was created to automatically supply most of the JCL cards. Most of this document has not changed for Version 3.0. It now, however, strictly applies only to PAN AIR version 3.0. The major changes are: (1) additional sections covering the new FDP module (which calculates streamlines and offbody points); (2) a complete rewrite of the section on the MAG module; and (3) strict applicability to CRAY computing systems.

10 CFR 431.223 - Materials incorporated by reference.

Code of Federal Regulations, 2013 CFR

2013-01-01

... procedures incorporated by reference. (1) Environmental Protection Agency, “ENERGY STAR Program Requirements... Agency “ENERGY STAR Program Requirements for Traffic Signals,” Version 1.1, may be obtained from the...

10 CFR 431.223 - Materials incorporated by reference.

Code of Federal Regulations, 2014 CFR

2014-01-01

... procedures incorporated by reference. (1) Environmental Protection Agency, “ENERGY STAR Program Requirements... Agency “ENERGY STAR Program Requirements for Traffic Signals,” Version 1.1, may be obtained from the...

10 CFR 431.223 - Materials incorporated by reference.

Code of Federal Regulations, 2012 CFR

2012-01-01

... procedures incorporated by reference. (1) Environmental Protection Agency, “ENERGY STAR Program Requirements... Agency “ENERGY STAR Program Requirements for Traffic Signals,” Version 1.1, may be obtained from the...

A multicenter, randomized controlled trial of individualized occupational therapy for patients with schizophrenia in Japan

PubMed Central

Ohori, Manami; Inagaki, Yusuke; Shimooka, Yuko; Sugimura, Naoya; Ishihara, Ikuyo; Yoshida, Tomotaka

2018-01-01

The individualized occupational therapy (IOT) program is a psychosocial program that we developed to facilitate proactive participation in treatment and improve cognitive functioning and other outcomes for inpatients with acute schizophrenia. The program consists of motivational interviewing, self-monitoring, individualized visits, handicraft activities, individualized psychoeducation, and discharge planning. This multicenter, open-labeled, blinded-endpoint, randomized controlled trial evaluated the impact of adding IOT to a group OT (GOT) program as usual for outcomes in recently hospitalized patients with schizophrenia in Japanese psychiatric hospitals setting compared with GOT alone. Patients with schizophrenia were randomly assigned to the GOT+IOT group or the GOT alone group. Among 136 randomized patients, 129 were included in the intent-to-treat population: 66 in the GOT+IOT and 63 in the GOT alone groups. Outcomes were administered at baseline and discharge or 3 months following hospitalization including the Brief Assessment of Cognition in Schizophrenia Japanese version (BACS-J), the Schizophrenia Cognition Rating Scale Japanese version, the Social Functioning Scale Japanese version, the Global Assessment of Functioning scale, the Intrinsic Motivation Inventory Japanese version (IMI-J), the Morisky Medication Adherence Scale-8 (MMAS-8), the Positive and Negative Syndrome Scale (PANSS), and the Japanese version of Client Satisfaction Questionnaire-8 (CSQ-8J). Results of linear mixed effects models indicated that the IOT+GOT showed significant improvements in verbal memory (p <0.01), working memory (p = 0.02), verbal fluency (p < 0.01), attention (p < 0.01), and composite score (p < 0.01) on the BACS-J; interest/enjoyment (p < 0.01), value/usefulness (p < 0.01), perceived choice (p < 0.01), and IMI-J total (p < 0.01) on the IMI-J; MMAS-8 score (p < 0.01) compared with the GOT alone. Patients in the GOT+IOT demonstrated significant improvements on the CSQ-8J compared with the GOT alone (p < 0.01). The present findings provide support for the feasibility in implementing an IOT program and its effectiveness for improving cognitive impairment and other outcomes in patients with schizophrenia. PMID:29621261

A multicenter, randomized controlled trial of individualized occupational therapy for patients with schizophrenia in Japan.

PubMed

Shimada, Takeshi; Ohori, Manami; Inagaki, Yusuke; Shimooka, Yuko; Sugimura, Naoya; Ishihara, Ikuyo; Yoshida, Tomotaka; Kobayashi, Masayoshi

2018-01-01

The individualized occupational therapy (IOT) program is a psychosocial program that we developed to facilitate proactive participation in treatment and improve cognitive functioning and other outcomes for inpatients with acute schizophrenia. The program consists of motivational interviewing, self-monitoring, individualized visits, handicraft activities, individualized psychoeducation, and discharge planning. This multicenter, open-labeled, blinded-endpoint, randomized controlled trial evaluated the impact of adding IOT to a group OT (GOT) program as usual for outcomes in recently hospitalized patients with schizophrenia in Japanese psychiatric hospitals setting compared with GOT alone. Patients with schizophrenia were randomly assigned to the GOT+IOT group or the GOT alone group. Among 136 randomized patients, 129 were included in the intent-to-treat population: 66 in the GOT+IOT and 63 in the GOT alone groups. Outcomes were administered at baseline and discharge or 3 months following hospitalization including the Brief Assessment of Cognition in Schizophrenia Japanese version (BACS-J), the Schizophrenia Cognition Rating Scale Japanese version, the Social Functioning Scale Japanese version, the Global Assessment of Functioning scale, the Intrinsic Motivation Inventory Japanese version (IMI-J), the Morisky Medication Adherence Scale-8 (MMAS-8), the Positive and Negative Syndrome Scale (PANSS), and the Japanese version of Client Satisfaction Questionnaire-8 (CSQ-8J). Results of linear mixed effects models indicated that the IOT+GOT showed significant improvements in verbal memory (p <0.01), working memory (p = 0.02), verbal fluency (p < 0.01), attention (p < 0.01), and composite score (p < 0.01) on the BACS-J; interest/enjoyment (p < 0.01), value/usefulness (p < 0.01), perceived choice (p < 0.01), and IMI-J total (p < 0.01) on the IMI-J; MMAS-8 score (p < 0.01) compared with the GOT alone. Patients in the GOT+IOT demonstrated significant improvements on the CSQ-8J compared with the GOT alone (p < 0.01). The present findings provide support for the feasibility in implementing an IOT program and its effectiveness for improving cognitive impairment and other outcomes in patients with schizophrenia.

SST algorithms in ACSPO reanalysis of AVHRR GAC data from 2002-2013

NASA Astrophysics Data System (ADS)

Petrenko, B.; Ignatov, A.; Kihai, Y.; Zhou, X.; Stroup, J.

2014-05-01

In response to a request from the NOAA Coral Reef Watch Program, NOAA SST Team initiated reprocessing of 4 km resolution GAC data from AVHRRs flown onboard NOAA and MetOp satellites. The objective is to create a longterm Level 2 Advanced Clear-Sky Processor for Oceans (ACSPO) SST product, consistent with NOAA operations. ACSPO-Reanalysis (RAN) is used as input in the NOAA geo-polar blended Level 4 SST and potentially other Level 4 SST products. In the first stage of reprocessing (reanalysis 1, or RAN1), data from NOAA-15, -16, -17, -18, -19, and Metop-A and -B, from 2002-present have been processed with ACSPO v2.20, and matched up with quality controlled in situ data from in situ Quality Monitor (iQuam) version 1. The ~12 years time series of matchups were used to develop and explore the SST retrieval algorithms, with emphasis on minimizing spatial biases in retrieved SSTs, close reproduction of the magnitudes of true SST variations, and maximizing temporal, spatial and inter-platform stability of retrieval metrics. Two types of SST algorithms were considered: conventional SST regressions, and recently developed incremental regressions. The conventional equations were adopted in the EUMETSAT OSI-SAF formulation, which, according to our previous analyses, provide relatively small regional biases and well-balanced combination of precision and sensitivity, in its class. Incremental regression equations were specifically elaborated to automatically correct for model minus observation biases, always present when RTM simulations are employed. Improved temporal stability was achieved by recalculation of SST coefficients from matchups on a daily basis, with a +/-45 day window around the current date. This presentation describes the candidate SST algorithms considered for the next round of ACSPO reanalysis, RAN2.

Microservices for systematic profiling and monitoring of the refactoring process at the LHCb experiment

NASA Astrophysics Data System (ADS)

Mazurov, Alexander; Couturier, Ben; Popov, Dmitry; Farley, Nathanael

2017-10-01

Any time you modify an implementation within a program, change compiler version or operating system, you should also do regression testing. You can do regression testing by rerunning existing tests against the changes to determine whether this breaks anything that worked prior to the change and by writing new tests where necessary. At LHCb we have a huge codebase which is maintained by many people and can be run within different setups. Such situations lead to the crucial necessity to guide refactoring with a central profiling system that helps to run tests and find the impact of changes. In our work we present a software architecture and tools for running a profiling system. This system is responsible for systematically running regression tests, collecting and comparing results of these tests so changes between different setups can be observed and reported. The main feature of our solution is that it is based on a microservices architecture. Microservices break a large project into loosely coupled modules, which communicate with each other through simple APIs. Such modular architectural style helps us to avoid general pitfalls of monolithic architectures such as hard to understand a codebase as well as maintaining a large codebase and ineffective scalability. Our solution also allows to escape a complexity of microservices deployment process by using software containers and services management tools. Containers and service managers let us quickly deploy linked modules in development, production or in any other environments. Most of the developed modules are generic which means that the proposed architecture and tools can be used not only in LHCb but adopted for other experiments and companies.

PC Utilities: Small Programs with a Big Impact

ERIC Educational Resources Information Center

Baule, Steven

2004-01-01

The three utility commercial programs available on the Internet are like software packages purchased through a vendor or the Internet, shareware programs are developed by individuals and distributed via the Internet for a small fee to obtain the complete version of the product, and freeware programs are distributed via the Internet free of cost.…

GRASP92: a package for large-scale relativistic atomic structure calculations

NASA Astrophysics Data System (ADS)

Parpia, F. A.; Froese Fischer, C.; Grant, I. P.

2006-12-01

Program summaryTitle of program: GRASP92 Catalogue identifier: ADCU_v1_1 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADCU_v1_1 Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Licensing provisions: no Programming language used: Fortran Computer: IBM POWERstation 320H Operating system: IBM AIX 3.2.5+ RAM: 64M words No. of lines in distributed program, including test data, etc.: 65 224 No of bytes in distributed program, including test data, etc.: 409 198 Distribution format: tar.gz Catalogue identifier of previous version: ADCU_v1_0 Journal reference of previous version: Comput. Phys. Comm. 94 (1996) 249 Does the new version supersede the previous version?: Yes Nature of problem: Prediction of atomic spectra—atomic energy levels, oscillator strengths, and radiative decay rates—using a 'fully relativistic' approach. Solution method: Atomic orbitals are assumed to be four-component spinor eigenstates of the angular momentum operator, j=l+s, and the parity operator Π=βπ. Configuration state functions (CSFs) are linear combinations of Slater determinants of atomic orbitals, and are simultaneous eigenfunctions of the atomic electronic angular momentum operator, J, and the atomic parity operator, P. Lists of CSFs are either explicitly prescribed by the user or generated from a set of reference CSFs, a set of subshells, and rules for deriving other CSFs from these. Approximate atomic state functions (ASFs) are linear combinations of CSFs. A variational functional may be constructed by combining expressions for the energies of one or more ASFs. Average level (AL) functionals are weighted sums of energies of all possible ASFs that may be constructed from a set of CSFs; the number of ASFs is then the same as the number, n, of CSFs. Optimal level (OL) functionals are weighted sums of energies of some subset of ASFs; the GRASP92 package is optimized for this latter class of functionals. The composition of an ASF in terms of CSFs sharing the same quantum numbers is determined using the configuration-interaction (CI) procedure that results upon varying the expansion coefficients to determine the extremum of a variational functional. Radial functions may be determined by numerically solving the multiconfiguration Dirac-Fock (MCDF) equations that result upon varying the orbital radial functions or some subset thereof so as to obtain an extremum of the variational functional. Radial wavefunctions may also be determined using a screened hydrogenic or Thomas-Fermi model, although these schemes generally provide initial estimates for MCDF self-consistent-field (SCF) calculations. Transition properties for pairs of ASFs are computed from matrix elements of multipole operators of the electromagnetic field. All matrix elements of CSFs are evaluated using the Racah algebra. Reasons for the new version: During recent studies using the general relativistic atomic structure package (GRASP92), several errors were found, some of which might have been present already in the earlier GRASP92 version (program ABJN_v1_0, Comput. Phys. Comm. 55 (1989) 425). These errors were reported and discussed by Froese Fischer, Gaigalas, and Ralchenko in a separate publication [C. Froese Fischer, G. Gaigalas, Y. Ralchenko, Comput. Phys. Comm. 175 (2006) 738-744. [7

i-SVOC -- A simulation program for indoor SVOCs (Version 1.0)

EPA Science Inventory

Program i-SVOC estimates the emissions, transport, and sorption of semivolatile organic compounds (SVOCs) in the indoor environment as functions of time when a series of initial conditions is given. This program implements a framework for dynamic modeling of indoor SVOCs develope...

The Effectiveness of Adapted Versions of an Evidence-based Prevention Program in Reducing Alcohol Use among Alternative School Students

PubMed Central

Hopson, Laura M.; Holleran Steiker, Lori K.

2010-01-01

Although there is a strong evidence base for effective substance abuse prevention programs for youth, there is a need to facilitate the implementation and evaluation of these programs in real world settings. This study evaluates the effectiveness of adapted versions of an evidence-based prevention program, keepin’ it REAL (kiR), with alternative school students. Programs are often adapted when used in schools and other community settings for a variety of reasons. The kiR adaptations, developed during an earlier phase of this study, were created to make the curriculum more appropriate for alternative high school youth. The adaptations were evaluated using a quasi-experimental design in which questionnaires were administered at pretest, posttest, and follow-up, and focus groups were conducted at posttest. MANOVA analyses indicate significantly reduced intentions to accept alcohol and, for younger participants, reduced alcohol use. Focus group data support the need for age appropriate prevention content. The authors discuss implications for practitioners implementing prevention programs in schools. PMID:20622971

A Preliminary Report on the PLATO V Terminal.

ERIC Educational Resources Information Center

Stifle, J. E.

This report is a preliminary description of a prototype of a second generation version of the PLATO IV (Programmed Logic for Automated Teaching Operations) student terminal. Development of a new terminal has been pursued with two objectives: to generate a more economic version of the PLATO IV terminal, and to expand capacities and performance of…

How to use the Stand-Damage Model: Version 2.0. (Computer program)

Treesearch

J.J. Colbert; George Racin

2001-01-01

The Stand-Damage Model simulates the growth of a forest stand, a spatially homogeneous collection of trees growing on a site. The model simulates growth from an initial inventory, user-prescribed management practices, and the effects of gypsy moth defoliation. Here we provide installation and operating instructions for Version 2.0.

ISS Expedition 42 Crew Profiles - Version 01

NASA Image and Video Library

2014-11-14

Narrated program with biographical information about ISS Expedition 42 crewmembers Terry Virts, Samantha Cristoforetti and Anton Shjaplerov. The program covers the crewmember's career including childhood photographs; footage from previous missions; and interview sound bites.

Ultrasonographic evaluation of myometrial thickness and prediction of a successful external cephalic version.

PubMed

Buhimschi, Catalin S; Buhimschi, Irina A; Wehrum, Mark J; Molaskey-Jones, Sherry; Sfakianaki, Anna K; Pettker, Christian M; Thung, Stephen; Campbell, Katherine H; Dulay, Antonette T; Funai, Edmund F; Bahtiyar, Mert O

2011-10-01

To test the hypothesis that myometrial thickness predicts the success of external cephalic version. Abdominal ultrasonographic scans were performed in 114 consecutive pregnant women with breech singletons before an external cephalic version maneuver. Myometrial thickness was measured by a standardized protocol at three sites: the lower segment, midanterior wall, and the fundal uterine wall. Independent variables analyzed in conjunction with myometrial thickness were: maternal age, parity, body mass index, abdominal wall thickness, estimated fetal weight, amniotic fluid index, placental thickness and location, fetal spine position, breech type, and delivery outcomes such as final mode of delivery and birth weight. Successful version was associated with a thicker ultrasonographic fundal myometrium (unsuccessful: 6.7 [5.5-8.4] compared with successful: 7.4 [6.6-9.7] mm, P=.037). Multivariate regression analysis showed that increased fundal myometrial thickness, high amniotic fluid index, and nonfrank breech presentation were the strongest independent predictors of external cephalic version success (P<.001). A fundal myometrial thickness greater than 6.75 mm and an amniotic fluid index greater than 12 cm were each associated with successful external cephalic versions (fundal myometrial thickness: odds ratio [OR] 2.4, 95% confidence interval [CI] 1.1-5.2, P=.029; amniotic fluid index: OR 2.8, 95% CI 1.3-6.0, P=.008). Combining the two variables resulted in an absolute risk reduction for a failed version of 27.6% (95% CI 7.1-48.1) and a number needed to treat of four (95% CI 2.1-14.2). Fundal myometrial thickness and amniotic fluid index contribute to success of external cephalic version and their evaluation can be easily incorporated in algorithms before the procedure. III.

The validity of the 4-Skills Scan: A double validation study.

PubMed

van Kernebeek, W G; de Kroon, M L A; Savelsbergh, G J P; Toussaint, H M

2018-06-01

Adequate gross motor skills are an essential aspect of a child's healthy development. Where physical education (PE) is part of the primary school curriculum, a strong curriculum-based emphasis on evaluation and support of motor skill development in PE is apparent. Monitoring motor development is then a task for the PE teacher. In order to fulfil this task, teachers need adequate tools. The 4-Skills Scan is a quick and easily manageable gross motor skill instrument; however, its validity has never been assessed. Therefore, the purpose of this study is to assess the construct and concurrent validity of both 4-Skills Scans (version 2007 and version 2015). A total of 212 primary school children (6 - 12 years old), was requested to participate in both versions of the 4-Skills Scan. For assessing construct validity, children covered an obstacle course with video recordings for observation by an expert panel. For concurrent validity, a comparison was made with the MABC-2, by calculating Pearson correlations. Multivariable linear regression analyses were performed to determine the contribution of each subscale to the construct of gross motor skills, according to the MABC-2 and the expert panel. Correlations between the 4-Skills Scans and expert valuations were moderate, with coefficients of .47 (version 2007) and .46 (version 2015). Correlations between the 4-Skills Scans and the MABC-2 (gross) were moderate (.56) for version 2007 and high (.64) for version 2015. It is concluded that both versions of the 4-Skills Scans are satisfactory valid instruments for assessing gross motor skills during PE lessons. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

VACTIV: A graphical dialog based program for an automatic processing of line and band spectra

NASA Astrophysics Data System (ADS)

Zlokazov, V. B.

2013-05-01

The program VACTIV-Visual ACTIV-has been developed for an automatic analysis of spectrum-like distributions, in particular gamma-ray spectra or alpha-spectra and is a standard graphical dialog based Windows XX application, driven by a menu, mouse and keyboard. On the one hand, it was a conversion of an existing Fortran program ACTIV [1] to the DELPHI language; on the other hand, it is a transformation of the sequential syntax of Fortran programming to a new object-oriented style, based on the organization of event interactions. New features implemented in the algorithms of both the versions consisted in the following as peak model both an analytical function and a graphical curve could be used; the peak search algorithm was able to recognize not only Gauss peaks but also peaks with an irregular form; both narrow peaks (2-4 channels) and broad ones (50-100 channels); the regularization technique in the fitting guaranteed a stable solution in the most complicated cases of strongly overlapping or weak peaks. The graphical dialog interface of VACTIV is much more convenient than the batch mode of ACTIV. [1] V.B. Zlokazov, Computer Physics Communications, 28 (1982) 27-37. NEW VERSION PROGRAM SUMMARYProgram Title: VACTIV Catalogue identifier: ABAC_v2_0 Licensing provisions: no Programming language: DELPHI 5-7 Pascal. Computer: IBM PC series. Operating system: Windows XX. RAM: 1 MB Keywords: Nuclear physics, spectrum decomposition, least squares analysis, graphical dialog, object-oriented programming. Classification: 17.6. Catalogue identifier of previous version: ABAC_v1_0 Journal reference of previous version: Comput. Phys. Commun. 28 (1982) 27 Does the new version supersede the previous version?: Yes. Nature of problem: Program VACTIV is intended for precise analysis of arbitrary spectrum-like distributions, e.g. gamma-ray and X-ray spectra and allows the user to carry out the full cycle of automatic processing of such spectra, i.e. calibration, automatic peak search and estimation of parameters of interest. VACTIV can run on any standard modern laptop. Reasons for the new version: At the time of its creation (1999) VACTIV was seemingly the first attempt to apply the newest programming languages and styles to systems of spectrum analysis. Its goal was to both get a convenient and efficient technique for data processing, and to elaborate the formalism of spectrum analysis in terms of classes, their properties, their methods and events of an object-oriented programming language. Summary of revisions: Compared with ACTIV, VACTIV preserves all the mathematical algorithms, but provides the user with all the benefits of an interface, based on a graphical dialog. It allows him to make a quick intervention in the work of the program; in particular, to carry out the on-line control of the fitting process: depending on the intermediate results and using the visual form of data representation, to change the conditions for the fitting and so achieve the optimum performance, selecting the optimum strategy. To find the best conditions for the fitting one can compress the spectrum, delete the blunders from it, smooth it using a high-frequency spline filter and build the background using a low-frequency spline filter; use not only automatic methods for the blunder deletion, the peak search, the peak model forming and the calibration, but also use manual mouse clicking on the spectrum graph. Restrictions: To enhance the reliability and portability of the program the majority of the most important arrays have a static allocation; all the arrays are allocated with a surplus, and the total pool of the program is restricted only by the size of the computer virtual memory. A spectrum has the static size of 32 K real words. The maximum size of the least-square matrix is 314 (the maximum number of fitted parameters per one analyzed spectrum interval, not for the whole spectrum), from which it follows that the maximum number of peaks in one spectrum interval is 154. The maximum total number of peaks in the spectrum is not restricted. Running time: The calculation time is negligibly small compared with the time for the dialog; using ini-files the program can be partly used in a semi-dialog mode.

Quick-start guide for version 3.0 of EMINERS - Economic Mineral Resource Simulator

USGS Publications Warehouse

Bawiec, Walter J.; Spanski, Gregory T.

2012-01-01

Quantitative mineral resource assessment, as developed by the U.S. Geological Survey (USGS), consists of three parts: (1) development of grade and tonnage mineral deposit models; (2) delineation of tracts permissive for each deposit type; and (3) probabilistic estimation of the numbers of undiscovered deposits for each deposit type (Singer and Menzie, 2010). The estimate of the number of undiscovered deposits at different levels of probability is the input to the EMINERS (Economic Mineral Resource Simulator) program. EMINERS uses a Monte Carlo statistical process to combine probabilistic estimates of undiscovered mineral deposits with models of mineral deposit grade and tonnage to estimate mineral resources. It is based upon a simulation program developed by Root and others (1992), who discussed many of the methods and algorithms of the program. Various versions of the original program (called "MARK3" and developed by David H. Root, William A. Scott, and Lawrence J. Drew of the USGS) have been published (Root, Scott, and Selner, 1996; Duval, 2000, 2012). The current version (3.0) of the EMINERS program is available as USGS Open-File Report 2004-1344 (Duval, 2012). Changes from version 2.0 include updating 87 grade and tonnage models, designing new templates to produce graphs showing cumulative distribution and summary tables, and disabling economic filters. The economic filters were disabled because embedded data for costs of labor and materials, mining techniques, and beneficiation methods are out of date. However, the cost algorithms used in the disabled economic filters are still in the program and available for reference for mining methods and milling techniques included in Camm (1991). EMINERS is written in C++ and depends upon the Microsoft Visual C++ 6.0 programming environment. The code depends heavily on the use of Microsoft Foundation Classes (MFC) for implementation of the Windows interface. The program works only on Microsoft Windows XP or newer personal computers. It does not work on Macintosh computers. This report demonstrates how to execute EMINERS software using default settings and existing deposit models. Many options are available when setting up the simulation. Information and explanations addressing these optional parameters can be found in the EMINERS Help files. Help files are available during execution of EMINERS by selecting EMINERS Help from the pull-down menu under Help on the EMINERS menu bar. There are four sections in this report. Part I describes the installation, setup, and application of the EMINERS program, and Part II illustrates how to interpret the text file that is produced. Part III describes the creation of tables and graphs by use of the provided Excel templates. Part IV summarizes grade and tonnage models used in version 3.0 of EMINERS.

A brief introduction to PYTHIA 8.1

NASA Astrophysics Data System (ADS)

Sjöstrand, Torbjörn; Mrenna, Stephen; Skands, Peter

2008-06-01

The PYTHIA program is a standard tool for the generation of high-energy collisions, comprising a coherent set of physics models for the evolution from a few-body hard process to a complex multihadronic final state. It contains a library of hard processes and models for initial- and final-state parton showers, multiple parton-parton interactions, beam remnants, string fragmentation and particle decays. It also has a set of utilities and interfaces to external programs. While previous versions were written in Fortran, PYTHIA 8 represents a complete rewrite in C++. The current release is the first main one after this transition, and does not yet in every respect replace the old code. It does contain some new physics aspects, on the other hand, that should make it an attractive option especially for LHC physics studies. Program summaryProgram title:PYTHIA 8.1 Catalogue identifier: ACTU_v3_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ACTU_v3_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GPL version 2 No. of lines in distributed program, including test data, etc.: 176 981 No. of bytes in distributed program, including test data, etc.: 2 411 876 Distribution format: tar.gz Programming language: C++ Computer: Commodity PCs Operating system: Linux; should also work on other systems RAM: 8 megabytes Classification: 11.2 Does the new version supersede the previous version?: yes, partly Nature of problem: High-energy collisions between elementary particles normally give rise to complex final states, with large multiplicities of hadrons, leptons, photons and neutrinos. The relation between these final states and the underlying physics description is not a simple one, for two main reasons. Firstly, we do not even in principle have a complete understanding of the physics. Secondly, any analytical approach is made intractable by the large multiplicities. Solution method: Complete events are generated by Monte Carlo methods. The complexity is mastered by a subdivision of the full problem into a set of simpler separate tasks. All main aspects of the events are simulated, such as hard-process selection, initial- and final-state radiation, beam remnants, fragmentation, decays, and so on. Therefore events should be directly comparable with experimentally observable ones. The programs can be used to extract physics from comparisons with existing data, or to study physics at future experiments. Reasons for new version: Improved and expanded physics models, transition from Fortran to C++. Summary of revisions: New user interface, transverse-momentum-ordered showers, interleaving with multiple interactions, and much more. Restrictions: Depends on the problem studied. Running time: 10-1000 events per second, depending on process studied. References: [1] T. Sjöstrand, P. Edén, C. Friberg, L. Lönnblad, G. Miu, S. Mrenna, E. Norrbin, Comput. Phys. Comm. 135 (2001) 238.

ZCURVE 3.0: identify prokaryotic genes with higher accuracy as well as automatically and accurately select essential genes.

PubMed

Hua, Zhi-Gang; Lin, Yan; Yuan, Ya-Zhou; Yang, De-Chang; Wei, Wen; Guo, Feng-Biao

2015-07-01

In 2003, we developed an ab initio program, ZCURVE 1.0, to find genes in bacterial and archaeal genomes. In this work, we present the updated version (i.e. ZCURVE 3.0). Using 422 prokaryotic genomes, the average accuracy was 93.7% with the updated version, compared with 88.7% with the original version. Such results also demonstrate that ZCURVE 3.0 is comparable with Glimmer 3.02 and may provide complementary predictions to it. In fact, the joint application of the two programs generated better results by correctly finding more annotated genes while also containing fewer false-positive predictions. As the exclusive function, ZCURVE 3.0 contains one post-processing program that can identify essential genes with high accuracy (generally >90%). We hope ZCURVE 3.0 will receive wide use with the web-based running mode. The updated ZCURVE can be freely accessed from http://cefg.uestc.edu.cn/zcurve/ or http://tubic.tju.edu.cn/zcurveb/ without any restrictions. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

Loci-STREAM Version 0.9

NASA Technical Reports Server (NTRS)

Wright, Jeffrey; Thakur, Siddharth

2006-01-01

Loci-STREAM is an evolving computational fluid dynamics (CFD) software tool for simulating possibly chemically reacting, possibly unsteady flows in diverse settings, including rocket engines, turbomachines, oil refineries, etc. Loci-STREAM implements a pressure- based flow-solving algorithm that utilizes unstructured grids. (The benefit of low memory usage by pressure-based algorithms is well recognized by experts in the field.) The algorithm is robust for flows at all speeds from zero to hypersonic. The flexibility of arbitrary polyhedral grids enables accurate, efficient simulation of flows in complex geometries, including those of plume-impingement problems. The present version - Loci-STREAM version 0.9 - includes an interface with the Portable, Extensible Toolkit for Scientific Computation (PETSc) library for access to enhanced linear-equation-solving programs therein that accelerate convergence toward a solution. The name "Loci" reflects the creation of this software within the Loci computational framework, which was developed at Mississippi State University for the primary purpose of simplifying the writing of complex multidisciplinary application programs to run in distributed-memory computing environments including clusters of personal computers. Loci has been designed to relieve application programmers of the details of programming for distributed-memory computers.

Consumer and provider responses to a computerized version of the Illness Management and Recovery Program.

PubMed

Wright-Berryman, Jennifer L; Salyers, Michelle P; O'Halloran, James P; Kemp, Aaron S; Mueser, Kim T; Diazoni, Amanda J

2013-12-01

To explore mental health consumer and provider responses to a computerized version of the Illness Management and Recovery (IMR) program. Semistructured interviews were conducted to gather data from 6 providers and 12 consumers who participated in a computerized prototype of the IMR program. An inductive-consensus-based approach was used to analyze the interview responses. Qualitative analysis revealed consumers perceived various personal benefits and ease of use afforded by the new technology platform. Consumers also highly valued provider assistance and offered several suggestions to improve the program. The largest perceived barriers to future implementation were lack of computer skills and access to computers. Similarly, IMR providers commented on its ease and convenience, and the reduction of time intensive material preparation. Providers also expressed that the use of technology creates more options for the consumer to access treatment. The technology was acceptable, easy to use, and well-liked by consumers and providers. Clinician assistance with technology was viewed as helpful to get clients started with the program, as lack of computer skills and access to computers was a concern. Access to materials between sessions appears to be desired; however, given perceived barriers of computer skills and computer access, additional supports may be needed for consumers to achieve full benefits of a computerized version of IMR. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Simulation of modern climate with the new version of the INM RAS climate model

NASA Astrophysics Data System (ADS)

Volodin, E. M.; Mortikov, E. V.; Kostrykin, S. V.; Galin, V. Ya.; Lykosov, V. N.; Gritsun, A. S.; Diansky, N. A.; Gusev, A. V.; Yakovlev, N. G.

2017-03-01

The INMCM5.0 numerical model of the Earth's climate system is presented, which is an evolution from the previous version, INMCM4.0. A higher vertical resolution for the stratosphere is applied in the atmospheric block. Also, we raised the upper boundary of the calculating area, added the aerosol block, modified parameterization of clouds and condensation, and increased the horizontal resolution in the ocean block. The program implementation of the model was also updated. We consider the simulation of the current climate using the new version of the model. Attention is focused on reducing systematic errors as compared to the previous version, reproducing phenomena that could not be simulated correctly in the previous version, and modeling the problems that remain unresolved.

Teaching mothers to read: evidence from Colombia on the key role of maternal education in preschool child nutritional health.

PubMed

Lomperis, A M

1991-10-01

The determinants of the severity of childhood malnutrition among a low income population in Cali, Colombia in 1974-76 were examined. Sections are devoted to the welfare maximization and household production model and methodology, the data set, the empirical results, the policy implications, and conclusions. The nutritional health of each preschooler is produced within the household with goods and time inputs (food, environmental sanitation, medical care, time invested in child care, and breastfeeding), and is conditioned by the state of household production technology (mother's literacy as a dummy variable -- version 1, and mother's level of schooling -- version 2) as well as by each child's sex, birth order, age, household size, and sociocultural setting. Constraints are total available income and time available (dummy variable). Reinhardt's version of the translog function is used to represent the production process. Household survey data were made available from a pilot study of a maternal and child health program (PRIMOPS) and includes 421 preschool children and 280 households, and food expenditure data for 197 children and 123 households. The main finding is that teaching Third World mothers to read holds the greatest promise of permanently improving the nutritional status of preschool children. The linear regression results show that the determinants of short-term nutritional status as reflected in weight for age (w/a) are the duration of breastfeeding, literacy, 1-3 years of schooling, and the available food in the household. The levels of significance are higher for version 2, but significance is achieved only with the lower levels of schooling. Birth order is statistically significant but weak and negative; i.e., higher birth orders are at higher risk of malnutrition. Long-term nutritional status is statistically significantly influenced by educational level, birth order, and food available, where older preschoolers are likely to experience stunting but not necessarily wasting. The last born suffers the most nutritionally. The proportion of time spent in child rearing vs. employment results needs further clarification. Breastfeeding effects are largely short term. Of the factors affecting children's nutritional status, the data show that food transfer approaches are not the most cost-effective means for solving chronic malnutrition. Implementing literacy programs would be a more successful strategy and lasts a lifetime. Breastfeeding must be for at least 4 months and preferably a year to show a significant improvement in nutrition, and does not eliminate the risk of malnutrition. Smaller families produce healthier children. A mother, who works part time or greater, increases income potential to provide for nutritional need; income and other factors such as literacy are critical determinants of preschool nutritional well being as supported by the findings of Wolfe and Behrman.

Maternal outcomes of term breech presentation delivery: impact of successful external cephalic version in a nationwide sample of delivery admissions in the United States.

PubMed

Weiniger, Carolyn F; Lyell, Deirdre J; Tsen, Lawrence C; Butwick, Alexander J; Shachar, BatZion; Callaghan, William M; Creanga, Andreea A; Bateman, Brian T

2016-07-08

We aimed to define the frequency and predictors of successful external cephalic version in a nationally-representative cohort of women with breech presentations and to compare maternal outcomes associated with successful external cephalic version versus persistent breech presentation. Using the Nationwide Inpatient Sample, a United States healthcare utilization database, we identified delivery admissions between 1998 and 2011 for women who had successful external cephalic version or persistent breech presentation (including unsuccessful or no external cephalic version attempt) at term. Multivariable logistic regression identified patient and hospital-level factors associated with successful external cephalic version. Maternal outcomes were compared between women who had successful external cephalic version versus persistent breech. Our study cohort comprised 1,079,576 delivery admissions with breech presentation; 56,409 (5.2 %) women underwent successful external cephalic version and 1,023,167 (94.8 %) women had persistent breech presentation at the time of delivery. The rate of cesarean delivery was lower among women who had successful external cephalic version compared to those with persistent breech (20.2 % vs. 94.9 %; p < 0.001). Compared to women with persistent breech at the time of delivery, women with successful external cephalic version were also less likely to experience several measures of significant maternal morbidity including endometritis (adjusted Odds Ratio (aOR) = 0.36, 95 % Confidence Interval (CI) 0.24-0.52), sepsis (aOR = 0.35, 95 % CI 0.24-0.51) and length of stay > 7 days (aOR = 0.53, 95 % CI 0.40-0.70), but had a higher risk of chorioamnionitis (aOR = 1.83, 95 % CI 1.54-2.17). Overall a low proportion of women with breech presentation undergo successful external cephalic version, and it is associated with significant reduction in the frequency of cesarean delivery and a number of measures of maternal morbidity. Increased external cephalic version use may be an important approach to mitigate the high rate of cesarean delivery observed in the United States.

Volumetric CT-images improve testing of radiological image interpretation skills.

PubMed

Ravesloot, Cécile J; van der Schaaf, Marieke F; van Schaik, Jan P J; ten Cate, Olle Th J; van der Gijp, Anouk; Mol, Christian P; Vincken, Koen L

2015-05-01

Current radiology practice increasingly involves interpretation of volumetric data sets. In contrast, most radiology tests still contain only 2D images. We introduced a new testing tool that allows for stack viewing of volumetric images in our undergraduate radiology program. We hypothesized that tests with volumetric CT-images enhance test quality, in comparison with traditional completely 2D image-based tests, because they might better reflect required skills for clinical practice. Two groups of medical students (n=139; n=143), trained with 2D and volumetric CT-images, took a digital radiology test in two versions (A and B), each containing both 2D and volumetric CT-image questions. In a questionnaire, they were asked to comment on the representativeness for clinical practice, difficulty and user-friendliness of the test questions and testing program. Students' test scores and reliabilities, measured with Cronbach's alpha, of 2D and volumetric CT-image tests were compared. Estimated reliabilities (Cronbach's alphas) were higher for volumetric CT-image scores (version A: .51 and version B: .54), than for 2D CT-image scores (version A: .24 and version B: .37). Participants found volumetric CT-image tests more representative of clinical practice, and considered them to be less difficult than volumetric CT-image questions. However, in one version (A), volumetric CT-image scores (M 80.9, SD 14.8) were significantly lower than 2D CT-image scores (M 88.4, SD 10.4) (p<.001). The volumetric CT-image testing program was considered user-friendly. This study shows that volumetric image questions can be successfully integrated in students' radiology testing. Results suggests that the inclusion of volumetric CT-images might improve the quality of radiology tests by positively impacting perceived representativeness for clinical practice and increasing reliability of the test. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Translation and validation of the Malay version of the Stroke Knowledge Test.

PubMed

Sowtali, Siti Noorkhairina; Yusoff, Dariah Mohd; Harith, Sakinah; Mohamed, Monniaty

2016-04-01

To date, there is a lack of published studies on assessment tools to evaluate the effectiveness of stroke education programs. This study developed and validated the Malay language version of the Stroke Knowledge Test research instrument. This study involved translation, validity, and reliability phases. The instrument underwent backward and forward translation of the English version into the Malay language. Nine experts reviewed the content for consistency, clarity, difficulty, and suitability for inclusion. Perceived usefulness and utilization were obtained from experts' opinions. Later, face validity assessment was conducted with 10 stroke patients to determine appropriateness of sentences and grammar used. A pilot study was conducted with 41 stroke patients to determine the item analysis and reliability of the translated instrument using the Kuder Richardson 20 or Cronbach's alpha. The final Malay version Stroke Knowledge Test included 20 items with good content coverage, acceptable item properties, and positive expert review ratings. Psychometric investigations suggest that Malay version Stroke Knowledge Test had moderate reliability with Kuder Richardson 20 or Cronbach's alpha of 0.58. Improvement is required for Stroke Knowledge Test items with unacceptable difficulty indices. Overall, the average rating of perceived usefulness and perceived utility of the instruments were both 72.7%, suggesting that reviewers were likely to use the instruments in their facilities. Malay version Stroke Knowledge Test was a valid and reliable tool to assess educational needs and to evaluate stroke knowledge among participants of group-based stroke education programs in Malaysia.

Predictors of participation in parenting workshops for improving adolescent behavioral and mental health: results from the common sense parenting trial.

PubMed

Fleming, Charles B; Mason, W Alex; Haggerty, Kevin P; Thompson, Ronald W; Fernandez, Kate; Casey-Goldstein, Mary; Oats, Robert G

2015-04-01

Engaging and retaining participants are crucial to achieving adequate implementation of parenting interventions designed to prevent problem behaviors among children and adolescents. This study examined predictors of engagement and retention in a group-based family intervention across two versions of the program: a standard version requiring only parent attendance for six sessions and an adapted version with two additional sessions that required attendance by the son or daughter. Families included a parent and an eighth grader who attended one of five high-poverty schools in an urban Pacific Northwest school district. The adapted version of the intervention had a higher rate of engagement than the standard version, a difference that was statistically significant after adjusting for other variables assessed at enrollment in the study. Higher household income and parent education, younger student age, and poorer affective quality in the parent-child relationship predicted greater likelihood of initial attendance. In the adapted version of the intervention, parents of boys were more likely to engage with the program than those of girls. The variables considered did not strongly predict retention, although retention was higher among parents of boys. Retention did not significantly differ between conditions. Asking for child attendance at workshops may have increased engagement in the intervention, while findings for other predictors of attendance point to the need for added efforts to recruit families who have less socioeconomic resources, as well as families who perceive they have less need for services.

Predictors of Participation in Parenting Workshops for Improving Adolescent Behavioral and Mental Health: Results from the Common Sense Parenting Trial

PubMed Central

Fleming, Charles B.; Mason, W. Alex; Haggerty, Kevin P.; Thompson, Ronald W.; Fernandez, Kate; Casey-Goldstein, Mary; Oats, Robert G.

2015-01-01

Engaging and retaining participants are crucial to achieving adequate implementation of parenting interventions designed to prevent problem behaviors among children and adolescents. This study examined predictors of engagement and retention in a group-based family intervention across two versions of the program: a standard version requiring only parent attendance for six sessions and an adapted version with two additional sessions that required attendance by the son or daughter. Families included a parent and an eighth grader who attended one of five high-poverty schools in an urban Pacific Northwest school district. The adapted version of the intervention had a higher rate of engagement than the standard version, a difference that was statistically significant after adjusting for other variables assessed at enrollment in the study. Higher household income and parent education, younger student age, and poorer affective quality in the parent-child relationship predicted greater likelihood of initial attendance. In the adapted version of the intervention, parents of boys were more likely to engage with the program than those of girls. The variables considered did not strongly predict retention, although retention was higher among parents of boys. Retention did not significantly differ between conditions. Asking for child attendance at workshops may have increased engagement in the intervention, while findings for other predictors of attendance point to the need for added efforts to recruit families who have less socioeconomic resources, as well as families who perceive they have less need for services. PMID:25656381

Modal analysis and dynamic stresses for acoustically excited shuttle insulation tiles

NASA Technical Reports Server (NTRS)

Ojalvo, I. U.; Ogilvie, P. L.

1975-01-01

Improvements and extensions to the RESIST computer program developed for determining the normalized modal stress response of shuttle insulation tiles are described. The new version of RESIST can accommodate primary structure panels with closed-cell stringers, in addition to the capability for treating open-cell stringers. In addition, the present version of RESIST numerically solves vibration problems several times faster than its predecessor. A new digital computer program, titled ARREST (Acoustic Response of Reusable Shuttle Tiles) is also described. Starting with modal information contained on output tapes from RESIST computer runs, ARREST determines RMS stresses, deflections and accelerations of shuttle panels with reusable surface insulation tiles. Both programs are applicable to stringer stiffened structural panels with or without reusable surface insulation titles.

User documentation for the FHWA Carpool Matching Program (second edition)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1975-01-01

This document provides persons interested in computerized carpool/buspool matching programs a complete description of the user documentation for the FHWA Carpool Matching Program. The FHWA program is written in American National Standard COBOL and thus should be readily transferable to environments other than the IBM 360/65 (OS) under which it has been developed and tested. The program has a compiled time core requirement of 110K and a maximum execution time core requirement of 110K. While considerable effort has been made to test the program in several applications and to achieve accuracy and completeness in the program and supporting documentation, themore » FHWA cannot guarantee the proper operation of this program by any user nor can it assume liability for any damage, loss, or inconvenience resulting from the operation of this program or the results obtained thereby. This present version of the carpool matching program represents the latest version of the first generation of an ongoing multi-phase process of improvements and refinements. The ultimate goal is an effective carpool and transit information system that will produce individualized information covering not only carpooling opportunities, but also transit routing, scheduling, and other identifying information for the commuter. (MCW)« less

Determinants of anemia among pregnant mothers attending antenatal care in Dessie town health facilities, northern central Ethiopia, unmatched case -control study.

PubMed

Tadesse, Sisay Eshete; Seid, Omer; G/Mariam, Yemane; Fekadu, Abel; Wasihun, Yitbarek; Endris, Kedir; Bitew, Abebayehu

2017-01-01

Anemia affects around 38.2% and 22% of pregnant women at a global and national level respectively. In developing countries, women start pregnancy with already depleted body stores of iron and other vitamins with significant variation of anemia within and between regions. To identify the determinants of anemia among pregnant mothers attending antenatal care in Dessie town health facilities, northern central Ethiopia. A health facility based unmatched case control study was conducted among 112 cases and 336 controls from January to March 2016 G.C. The sample size was determined by using Epi Info version 7.1.5.2. Study subjects were selected using consecutive sampling technique. Data were collected using a structured questionnaire, entered using Epi Data version 3.1 and analyzed using SPSS version 20. Bivariable and multivariable logistic regression model was used to see the determinants of anemia. Adjusted odds ratio (AOR) with 95% confidence interval (CI) and p-value<0.05 were used to see the significant association. Failure to take dark green leafy vegetables per two weeks (AOR = 5.02, 95% CI: 2.16, 11.71), didn't take chicken per two weeks (AOR = 2.68, 95% CI: 1.22, 5.86), 1st trimester (AOR = 2.07, 95% CI: 1.12, 3.84), 3rd trimester (AOR = 2.96, 95% CI: 1.53, 5.72), HIV infection (AOR = 6.78, 95% CI: 2.28, 20.18) and medication (AOR = 3.57 95% CI: 1.60, 7.98) were positively associated with anemia. Inadequate intake of dark green leafy vegetables, inadequate consumption of chicken, trimester of the current pregnancy, HIV infection and medication were the determinants of anemia among pregnant women. Therefore, anemia prevention strategy should include promotion of adequate intake of dark green leafy vegetables and chicken, increase meal pattern during the entire pregnancy and strengthen the prevention of mother to child HIV transmission/antenatal care programs.

Determinants of anemia among pregnant mothers attending antenatal care in Dessie town health facilities, northern central Ethiopia, unmatched case -control study

PubMed Central

Seid, Omer; G/Mariam, Yemane; Fekadu, Abel; Wasihun, Yitbarek; Endris, Kedir; Bitew, Abebayehu

2017-01-01

Introduction Anemia affects around 38.2% and 22% of pregnant women at a global and national level respectively. In developing countries, women start pregnancy with already depleted body stores of iron and other vitamins with significant variation of anemia within and between regions. Objective To identify the determinants of anemia among pregnant mothers attending antenatal care in Dessie town health facilities, northern central Ethiopia. Methods A health facility based unmatched case control study was conducted among 112 cases and 336 controls from January to March 2016 G.C. The sample size was determined by using Epi Info version 7.1.5.2. Study subjects were selected using consecutive sampling technique. Data were collected using a structured questionnaire, entered using Epi Data version 3.1 and analyzed using SPSS version 20. Bivariable and multivariable logistic regression model was used to see the determinants of anemia. Adjusted odds ratio (AOR) with 95% confidence interval (CI) and p-value<0.05 were used to see the significant association. Results Failure to take dark green leafy vegetables per two weeks (AOR = 5.02, 95% CI: 2.16, 11.71), didn’t take chicken per two weeks (AOR = 2.68, 95% CI: 1.22, 5.86), 1st trimester (AOR = 2.07, 95% CI: 1.12, 3.84), 3rd trimester (AOR = 2.96, 95% CI: 1.53, 5.72), HIV infection (AOR = 6.78, 95% CI: 2.28, 20.18) and medication (AOR = 3.57 95% CI: 1.60, 7.98) were positively associated with anemia. Conclusions Inadequate intake of dark green leafy vegetables, inadequate consumption of chicken, trimester of the current pregnancy, HIV infection and medication were the determinants of anemia among pregnant women. Therefore, anemia prevention strategy should include promotion of adequate intake of dark green leafy vegetables and chicken, increase meal pattern during the entire pregnancy and strengthen the prevention of mother to child HIV transmission/antenatal care programs. PMID:28288159

Word Processors: A Look at Four Popular Programs.

ERIC Educational Resources Information Center

Press, Larry

1980-01-01

Described are types of programs used for processing text (editors, print formatters, and word processors), followed by the comparison of four word-processing packages: Auto Scribe, Electric Pencil, Magic Want and Word Star. With the exception of Auto Scribe, all programs reviewed are CP/M versions. (KC)

Text only version of the National Estuary Program Story Map

EPA Pesticide Factsheets

Since 1987, the EPA National Estuary Program (NEP) has made a unique and lasting contribution to protecting and restoring our nation's estuaries, delivering environmental and public health benefits to the American people.

User's Guide for the Interactive Scheduling Program : Preliminary Calendar Version

DOT National Transportation Integrated Search

1978-08-01

The Office of Transportation Management of the Urban Mass Transportation Administration (UMTA), in conjunction with the Transportation Systems Center (TSC), designed and developed the Interactive Scheduling Program (ISP) to assist rail-transit operat...

TRASYS - THERMAL RADIATION ANALYZER SYSTEM (DEC VAX VERSION WITH NASADIG)

NASA Technical Reports Server (NTRS)

Anderson, G. E.

1994-01-01

The Thermal Radiation Analyzer System, TRASYS, is a computer software system with generalized capability to solve the radiation related aspects of thermal analysis problems. TRASYS computes the total thermal radiation environment for a spacecraft in orbit. The software calculates internode radiation interchange data as well as incident and absorbed heat rate data originating from environmental radiant heat sources. TRASYS provides data of both types in a format directly usable by such thermal analyzer programs as SINDA/FLUINT (available from COSMIC, program number MSC-21528). One primary feature of TRASYS is that it allows users to write their own driver programs to organize and direct the preprocessor and processor library routines in solving specific thermal radiation problems. The preprocessor first reads and converts the user's geometry input data into the form used by the processor library routines. Then, the preprocessor accepts the user's driving logic, written in the TRASYS modified FORTRAN language. In many cases, the user has a choice of routines to solve a given problem. Users may also provide their own routines where desirable. In particular, the user may write output routines to provide for an interface between TRASYS and any thermal analyzer program using the R-C network concept. Input to the TRASYS program consists of Options and Edit data, Model data, and Logic Flow and Operations data. Options and Edit data provide for basic program control and user edit capability. The Model data describe the problem in terms of geometry and other properties. This information includes surface geometry data, documentation data, nodal data, block coordinate system data, form factor data, and flux data. Logic Flow and Operations data house the user's driver logic, including the sequence of subroutine calls and the subroutine library. Output from TRASYS consists of two basic types of data: internode radiation interchange data, and incident and absorbed heat rate data. The flexible structure of TRASYS allows considerable freedom in the definition and choice of solution method for a thermal radiation problem. The program's flexible structure has also allowed TRASYS to retain the same basic input structure as the authors update it in order to keep up with changing requirements. Among its other important features are the following: 1) up to 3200 node problem size capability with shadowing by intervening opaque or semi-transparent surfaces; 2) choice of diffuse, specular, or diffuse/specular radiant interchange solutions; 3) a restart capability that minimizes recomputing; 4) macroinstructions that automatically provide the executive logic for orbit generation that optimizes the use of previously completed computations; 5) a time variable geometry package that provides automatic pointing of the various parts of an articulated spacecraft and an automatic look-back feature that eliminates redundant form factor calculations; 6) capability to specify submodel names to identify sets of surfaces or components as an entity; and 7) subroutines to perform functions which save and recall the internodal and/or space form factors in subsequent steps for nodes with fixed geometry during a variable geometry run. There are two machine versions of TRASYS v27: a DEC VAX version and a Cray UNICOS version. Both versions require installation of the NASADIG library (MSC-21801 for DEC VAX or COS-10049 for CRAY), which is available from COSMIC either separately or bundled with TRASYS. The NASADIG (NASA Device Independent Graphics Library) plot package provides a pictorial representation of input geometry, orbital/orientation parameters, and heating rate output as a function of time. NASADIG supports Tektronix terminals. The CRAY version of TRASYS v27 is written in FORTRAN 77 for batch or interactive execution and has been implemented on CRAY X-MP and CRAY Y-MP series computers running UNICOS. The standard distribution medium for MSC-21959 (CRAY version without NASADIG) is a 1600 BPI 9-track magnetic tape in UNIX tar format. The standard distribution medium for COS-10040 (CRAY version with NASADIG) is a set of two 6250 BPI 9-track magnetic tapes in UNIX tar format. Alternate distribution media and formats are available upon request. The DEC VAX version of TRASYS v27 is written in FORTRAN 77 for batch execution (only the plotting driver program is interactive) and has been implemented on a DEC VAX 8650 computer under VMS. Since the source codes for MSC-21030 and COS-10026 are in VAX/VMS text library files and DEC Command Language files, COSMIC will only provide these programs in the following formats: MSC-21030, TRASYS (DEC VAX version without NASADIG) is available on a 1600 BPI 9-track magnetic tape in VAX BACKUP format (standard distribution medium) or in VAX BACKUP format on a TK50 tape cartridge; COS-10026, TRASYS (DEC VAX version with NASADIG), is available in VAX BACKUP format on a set of three 6250 BPI 9-track magnetic tapes (standard distribution medium) or a set of three TK50 tape cartridges in VAX BACKUP format. TRASYS was last updated in 1993.

TRASYS - THERMAL RADIATION ANALYZER SYSTEM (CRAY VERSION WITH NASADIG)

NASA Technical Reports Server (NTRS)

Anderson, G. E.

1994-01-01

The Thermal Radiation Analyzer System, TRASYS, is a computer software system with generalized capability to solve the radiation related aspects of thermal analysis problems. TRASYS computes the total thermal radiation environment for a spacecraft in orbit. The software calculates internode radiation interchange data as well as incident and absorbed heat rate data originating from environmental radiant heat sources. TRASYS provides data of both types in a format directly usable by such thermal analyzer programs as SINDA/FLUINT (available from COSMIC, program number MSC-21528). One primary feature of TRASYS is that it allows users to write their own driver programs to organize and direct the preprocessor and processor library routines in solving specific thermal radiation problems. The preprocessor first reads and converts the user's geometry input data into the form used by the processor library routines. Then, the preprocessor accepts the user's driving logic, written in the TRASYS modified FORTRAN language. In many cases, the user has a choice of routines to solve a given problem. Users may also provide their own routines where desirable. In particular, the user may write output routines to provide for an interface between TRASYS and any thermal analyzer program using the R-C network concept. Input to the TRASYS program consists of Options and Edit data, Model data, and Logic Flow and Operations data. Options and Edit data provide for basic program control and user edit capability. The Model data describe the problem in terms of geometry and other properties. This information includes surface geometry data, documentation data, nodal data, block coordinate system data, form factor data, and flux data. Logic Flow and Operations data house the user's driver logic, including the sequence of subroutine calls and the subroutine library. Output from TRASYS consists of two basic types of data: internode radiation interchange data, and incident and absorbed heat rate data. The flexible structure of TRASYS allows considerable freedom in the definition and choice of solution method for a thermal radiation problem. The program's flexible structure has also allowed TRASYS to retain the same basic input structure as the authors update it in order to keep up with changing requirements. Among its other important features are the following: 1) up to 3200 node problem size capability with shadowing by intervening opaque or semi-transparent surfaces; 2) choice of diffuse, specular, or diffuse/specular radiant interchange solutions; 3) a restart capability that minimizes recomputing; 4) macroinstructions that automatically provide the executive logic for orbit generation that optimizes the use of previously completed computations; 5) a time variable geometry package that provides automatic pointing of the various parts of an articulated spacecraft and an automatic look-back feature that eliminates redundant form factor calculations; 6) capability to specify submodel names to identify sets of surfaces or components as an entity; and 7) subroutines to perform functions which save and recall the internodal and/or space form factors in subsequent steps for nodes with fixed geometry during a variable geometry run. There are two machine versions of TRASYS v27: a DEC VAX version and a Cray UNICOS version. Both versions require installation of the NASADIG library (MSC-21801 for DEC VAX or COS-10049 for CRAY), which is available from COSMIC either separately or bundled with TRASYS. The NASADIG (NASA Device Independent Graphics Library) plot package provides a pictorial representation of input geometry, orbital/orientation parameters, and heating rate output as a function of time. NASADIG supports Tektronix terminals. The CRAY version of TRASYS v27 is written in FORTRAN 77 for batch or interactive execution and has been implemented on CRAY X-MP and CRAY Y-MP series computers running UNICOS. The standard distribution medium for MSC-21959 (CRAY version without NASADIG) is a 1600 BPI 9-track magnetic tape in UNIX tar format. The standard distribution medium for COS-10040 (CRAY version with NASADIG) is a set of two 6250 BPI 9-track magnetic tapes in UNIX tar format. Alternate distribution media and formats are available upon request. The DEC VAX version of TRASYS v27 is written in FORTRAN 77 for batch execution (only the plotting driver program is interactive) and has been implemented on a DEC VAX 8650 computer under VMS. Since the source codes for MSC-21030 and COS-10026 are in VAX/VMS text library files and DEC Command Language files, COSMIC will only provide these programs in the following formats: MSC-21030, TRASYS (DEC VAX version without NASADIG) is available on a 1600 BPI 9-track magnetic tape in VAX BACKUP format (standard distribution medium) or in VAX BACKUP format on a TK50 tape cartridge; COS-10026, TRASYS (DEC VAX version with NASADIG), is available in VAX BACKUP format on a set of three 6250 BPI 9-track magnetic tapes (standard distribution medium) or a set of three TK50 tape cartridges in VAX BACKUP format. TRASYS was last updated in 1993.

TRASYS - THERMAL RADIATION ANALYZER SYSTEM (DEC VAX VERSION WITHOUT NASADIG)

NASA Technical Reports Server (NTRS)

Vogt, R. A.

1994-01-01

The Thermal Radiation Analyzer System, TRASYS, is a computer software system with generalized capability to solve the radiation related aspects of thermal analysis problems. TRASYS computes the total thermal radiation environment for a spacecraft in orbit. The software calculates internode radiation interchange data as well as incident and absorbed heat rate data originating from environmental radiant heat sources. TRASYS provides data of both types in a format directly usable by such thermal analyzer programs as SINDA/FLUINT (available from COSMIC, program number MSC-21528). One primary feature of TRASYS is that it allows users to write their own driver programs to organize and direct the preprocessor and processor library routines in solving specific thermal radiation problems. The preprocessor first reads and converts the user's geometry input data into the form used by the processor library routines. Then, the preprocessor accepts the user's driving logic, written in the TRASYS modified FORTRAN language. In many cases, the user has a choice of routines to solve a given problem. Users may also provide their own routines where desirable. In particular, the user may write output routines to provide for an interface between TRASYS and any thermal analyzer program using the R-C network concept. Input to the TRASYS program consists of Options and Edit data, Model data, and Logic Flow and Operations data. Options and Edit data provide for basic program control and user edit capability. The Model data describe the problem in terms of geometry and other properties. This information includes surface geometry data, documentation data, nodal data, block coordinate system data, form factor data, and flux data. Logic Flow and Operations data house the user's driver logic, including the sequence of subroutine calls and the subroutine library. Output from TRASYS consists of two basic types of data: internode radiation interchange data, and incident and absorbed heat rate data. The flexible structure of TRASYS allows considerable freedom in the definition and choice of solution method for a thermal radiation problem. The program's flexible structure has also allowed TRASYS to retain the same basic input structure as the authors update it in order to keep up with changing requirements. Among its other important features are the following: 1) up to 3200 node problem size capability with shadowing by intervening opaque or semi-transparent surfaces; 2) choice of diffuse, specular, or diffuse/specular radiant interchange solutions; 3) a restart capability that minimizes recomputing; 4) macroinstructions that automatically provide the executive logic for orbit generation that optimizes the use of previously completed computations; 5) a time variable geometry package that provides automatic pointing of the various parts of an articulated spacecraft and an automatic look-back feature that eliminates redundant form factor calculations; 6) capability to specify submodel names to identify sets of surfaces or components as an entity; and 7) subroutines to perform functions which save and recall the internodal and/or space form factors in subsequent steps for nodes with fixed geometry during a variable geometry run. There are two machine versions of TRASYS v27: a DEC VAX version and a Cray UNICOS version. Both versions require installation of the NASADIG library (MSC-21801 for DEC VAX or COS-10049 for CRAY), which is available from COSMIC either separately or bundled with TRASYS. The NASADIG (NASA Device Independent Graphics Library) plot package provides a pictorial representation of input geometry, orbital/orientation parameters, and heating rate output as a function of time. NASADIG supports Tektronix terminals. The CRAY version of TRASYS v27 is written in FORTRAN 77 for batch or interactive execution and has been implemented on CRAY X-MP and CRAY Y-MP series computers running UNICOS. The standard distribution medium for MSC-21959 (CRAY version without NASADIG) is a 1600 BPI 9-track magnetic tape in UNIX tar format. The standard distribution medium for COS-10040 (CRAY version with NASADIG) is a set of two 6250 BPI 9-track magnetic tapes in UNIX tar format. Alternate distribution media and formats are available upon request. The DEC VAX version of TRASYS v27 is written in FORTRAN 77 for batch execution (only the plotting driver program is interactive) and has been implemented on a DEC VAX 8650 computer under VMS. Since the source codes for MSC-21030 and COS-10026 are in VAX/VMS text library files and DEC Command Language files, COSMIC will only provide these programs in the following formats: MSC-21030, TRASYS (DEC VAX version without NASADIG) is available on a 1600 BPI 9-track magnetic tape in VAX BACKUP format (standard distribution medium) or in VAX BACKUP format on a TK50 tape cartridge; COS-10026, TRASYS (DEC VAX version with NASADIG), is available in VAX BACKUP format on a set of three 6250 BPI 9-track magnetic tapes (standard distribution medium) or a set of three TK50 tape cartridges in VAX BACKUP format. TRASYS was last updated in 1993.

Automating approximate Bayesian computation by local linear regression.

PubMed

Thornton, Kevin R

2009-07-07

In several biological contexts, parameter inference often relies on computationally-intensive techniques. "Approximate Bayesian Computation", or ABC, methods based on summary statistics have become increasingly popular. A particular flavor of ABC based on using a linear regression to approximate the posterior distribution of the parameters, conditional on the summary statistics, is computationally appealing, yet no standalone tool exists to automate the procedure. Here, I describe a program to implement the method. The software package ABCreg implements the local linear-regression approach to ABC. The advantages are: 1. The code is standalone, and fully-documented. 2. The program will automatically process multiple data sets, and create unique output files for each (which may be processed immediately in R), facilitating the testing of inference procedures on simulated data, or the analysis of multiple data sets. 3. The program implements two different transformation methods for the regression step. 4. Analysis options are controlled on the command line by the user, and the program is designed to output warnings for cases where the regression fails. 5. The program does not depend on any particular simulation machinery (coalescent, forward-time, etc.), and therefore is a general tool for processing the results from any simulation. 6. The code is open-source, and modular.Examples of applying the software to empirical data from Drosophila melanogaster, and testing the procedure on simulated data, are shown. In practice, the ABCreg simplifies implementing ABC based on local-linear regression.

SEAWAT Version 4: A Computer Program for Simulation of Multi-Species Solute and Heat Transport

USGS Publications Warehouse

Langevin, Christian D.; Thorne, Daniel T.; Dausman, Alyssa M.; Sukop, Michael C.; Guo, Weixing

2008-01-01

The SEAWAT program is a coupled version of MODFLOW and MT3DMS designed to simulate three-dimensional, variable-density, saturated ground-water flow. Flexible equations were added to the program to allow fluid density to be calculated as a function of one or more MT3DMS species. Fluid density may also be calculated as a function of fluid pressure. The effect of fluid viscosity variations on ground-water flow was included as an option. Fluid viscosity can be calculated as a function of one or more MT3DMS species, and the program includes additional functions for representing the dependence on temperature. Although MT3DMS and SEAWAT are not explicitly designed to simulate heat transport, temperature can be simulated as one of the species by entering appropriate transport coefficients. For example, the process of heat conduction is mathematically analogous to Fickian diffusion. Heat conduction can be represented in SEAWAT by assigning a thermal diffusivity for the temperature species (instead of a molecular diffusion coefficient for a solute species). Heat exchange with the solid matrix can be treated in a similar manner by using the mathematically equivalent process of solute sorption. By combining flexible equations for fluid density and viscosity with multi-species transport, SEAWAT Version 4 represents variable-density ground-water flow coupled with multi-species solute and heat transport. SEAWAT Version 4 is based on MODFLOW-2000 and MT3DMS and retains all of the functionality of SEAWAT-2000. SEAWAT Version 4 also supports new simulation options for coupling flow and transport, and for representing constant-head boundaries. In previous versions of SEAWAT, the flow equation was solved for every transport timestep, regardless of whether or not there was a large change in fluid density. A new option was implemented in SEAWAT Version 4 that allows users to control how often the flow field is updated. New options were also implemented for representing constant-head boundaries with the Time-Variant Constant-Head (CHD) Package. These options allow for increased flexibility when using CHD flow boundaries with the zero-dispersive flux solute boundaries implemented by MT3DMS at constant-head cells. This report contains revised input instructions for the MT3DMS Dispersion (DSP) Package, Variable-Density Flow (VDF) Package, Viscosity (VSC) Package, and CHD Package. The report concludes with seven cases of an example problem designed to highlight many of the new features.

TIM, a ray-tracing program for METATOY research and its dissemination

NASA Astrophysics Data System (ADS)

Lambert, Dean; Hamilton, Alasdair C.; Constable, George; Snehanshu, Harsh; Talati, Sharvil; Courtial, Johannes

2012-03-01

TIM (The Interactive METATOY) is a ray-tracing program specifically tailored towards our research in METATOYs, which are optical components that appear to be able to create wave-optically forbidden light-ray fields. For this reason, TIM possesses features not found in other ray-tracing programs. TIM can either be used interactively or by modifying the openly available source code; in both cases, it can easily be run as an applet embedded in a web page. Here we describe the basic structure of TIM's source code and how to extend it, and we give examples of how we have used TIM in our own research. Program summaryProgram title: TIM Catalogue identifier: AEKY_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKY_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License No. of lines in distributed program, including test data, etc.: 124 478 No. of bytes in distributed program, including test data, etc.: 4 120 052 Distribution format: tar.gz Programming language: Java Computer: Any computer capable of running the Java Virtual Machine (JVM) 1.6 Operating system: Any; developed under Mac OS X Version 10.6 RAM: Typically 145 MB (interactive version running under Mac OS X Version 10.6) Classification: 14, 18 External routines: JAMA [1] (source code included) Nature of problem: Visualisation of scenes that include scene objects that create wave-optically forbidden light-ray fields. Solution method: Ray tracing. Unusual features: Specifically designed to visualise wave-optically forbidden light-ray fields; can visualise ray trajectories; can visualise geometric optic transformations; can create anaglyphs (for viewing with coloured "3D glasses") and random-dot autostereograms of the scene; integrable into web pages. Running time: Problem-dependent; typically seconds for a simple scene.

Utilities for master source code distribution: MAX and Friends

NASA Technical Reports Server (NTRS)

Felippa, Carlos A.

1988-01-01

MAX is a program for the manipulation of FORTRAN master source code (MSC). This is a technique by which one maintains one and only one master copy of a FORTRAN program under a program developing system, which for MAX is assumed to be VAX/VMS. The master copy is not intended to be directly compiled. Instead it must be pre-processed by MAX to produce compilable instances. These instances may correspond to different code versions (for example, double precision versus single precision), different machines (for example, IBM, CDC, Cray) or different operating systems (i.e., VAX/VMS versus VAX/UNIX). The advantage os using a master source is more pronounced in complex application programs that are developed and maintained over many years and are to be transported and executed on several computer environments. The version lag problem that plagues many such programs is avoided by this approach. MAX is complemented by several auxiliary programs that perform nonessential functions. The ensemble is collectively known as MAX and Friends. All of these programs, including MAX, are executed as foreign VAX/VMS commands and can easily be hidden in customized VMS command procedures.

COMBIMAN Programs (COMputerized BIomechanical MAN-Model). Version 8 (User’s Guide)

DTIC Science & Technology

1989-02-01

prgrams The guide is based on the program as of January 1989. It deals with the conventions used to develop and analyze crew stations, the generation of the...END ACTION: This is a safety to prevent ending the program if PFK 31 is accidentally depressed. Select END COMBIMAN if you intended to end the program

Books and Pets: Our Friends for Life! Arizona Reading Program Manual.

ERIC Educational Resources Information Center

Arizona State Dept. of Library, Archives and Public Records, Phoenix.

This reading program manual delineates the "Books and Pets" program, a project of Arizona Reads, which is a collaboration between the Arizona Humanities Council and the Arizona State Library, Archives, and Public Records. A CD-ROM version of the program accompanies the manual. The manual is divided into the following parts: Introduction;…

Computer Programs for Chemistry Experiments I and II.

ERIC Educational Resources Information Center

Reynard, Dale C.

This unit of instruction includes nine laboratory experiments. All of the experiments are from the D.C. Health Revision of the Chemical Education Materials Study (CHEMS) with one exception. Program six is the lab from the original version of the CHEMS program. Each program consists of three parts (1) the lab and computer hints, (2) the description…

The U.S. Geological Survey coal quality (COALQUAL) database version 3.0

USGS Publications Warehouse

Palmer, Curtis A.; Oman, Charles L.; Park, Andy J.; Luppens, James A.

2015-12-21

Because of database size limits during the development of COALQUAL Version 1.3, many analyses of individual bench samples were merged into whole coal bed averages. The methodology for making these composite intervals was not consistent. Size limits also restricted the amount of georeferencing information and forced removal of qualifier notations such as "less than detection limit" (<) information, which can cause problems when using the data. A review of the original data sheets revealed that COALQUAL Version 2.0 was missing information that was needed for a complete understanding of a coal section. Another important database issue to resolve was the USGS "remnant moisture" problem. Prior to 1998, tests for remnant moisture (as-determined moisture in the sample at the time of analysis) were not performed on any USGS major, minor, or trace element coal analyses. Without the remnant moisture, it is impossible to convert the analyses to a usable basis (as-received, dry, etc.). Based on remnant moisture analyses of hundreds of samples of different ranks (and known residual moisture) reported after 1998, it was possible to develop a method to provide reasonable estimates of remnant moisture for older data to make it more useful in COALQUAL Version 3.0. In addition, COALQUAL Version 3.0 is improved by (1) adding qualifiers, including statistical programming to deal with the qualifiers; (2) clarifying the sample compositing problems; and (3) adding associated samples. Version 3.0 of COALQUAL also represents the first attempt to incorporate data verification by mathematically crosschecking certain analytical parameters. Finally, a new database system was designed and implemented to replace the outdated DOS program used in earlier versions of the database.

Second generation experiments in fault tolerant software

NASA Technical Reports Server (NTRS)

Knight, J. C.

1987-01-01

The purpose of the Multi-Version Software (MVS) experiment is to obtain empirical measurements of the performance of multi-version systems. Twenty version of a program were prepared under reasonably realistic development conditions from the same specifications. The overall structure of the testing environment for the MVS experiment and its status are described. A preliminary version of the control system is described that was implemented for the MVS experiment to allow the experimenter to have control over the details of the testing. The results of an empirical study of error detection using self checks are also presented. The analysis of the checks revealed that there are great differences in the ability of individual programmers to design effective checks.

Program Participants Increase Equitable Attitudes.

ERIC Educational Resources Information Center

New Jersey Research Bulletin, 1996

1996-01-01

In 1996, the effectiveness of New Jersey's Perkins Act-funded single parent/displaced homemaker and gender equity programs were evaluated by using a modified version of MacDonald's Sex Role Survey to determine the effects of program participation on participants' attitudes toward four dimensions of sex equity: work, behavior, equity, and home.…

Facilitating Family Group Inquiry at Science Museum Exhibits

ERIC Educational Resources Information Center

Gutwill, Joshua P.; Allen, Sue

2010-01-01

We describe a study of programs to deepen families' scientific inquiry practices in a science museum setting. The programs incorporated research-based learning principles from formal and informal educational environments. In a randomized experimental design, two versions of the programs, called "inquiry games," were compared to two control…

Teaching Adaptability of Object-Oriented Programming Language Curriculum

ERIC Educational Resources Information Center

Zhu, Xiao-dong

2012-01-01

The evolution of object-oriented programming languages includes update of their own versions, update of development environments, and reform of new languages upon old languages. In this paper, the evolution analysis of object-oriented programming languages is presented in term of the characters and development. The notion of adaptive teaching upon…

Foresters' Metric Conversions program (version 1.0). [Computer program

Treesearch

Jefferson A. Palmer

1999-01-01

The conversion of scientific measurements has become commonplace in the fields of - engineering, research, and forestry. Foresters? Metric Conversions is a Windows-based computer program that quickly converts user-defined measurements from English to metric and from metric to English. Foresters? Metric Conversions was derived from the publication "Metric...

Standard interface files and procedures for reactor physics codes, version III

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carmichael, B.M.

Standards and procedures for promoting the exchange of reactor physics codes are updated to Version-III status. Standards covering program structure, interface files, file handling subroutines, and card input format are included. The implementation status of the standards in codes and the extension of the standards to new code areas are summarized. (15 references) (auth)

Comprehensive Monitoring Program. Air Quality Data Assessment for 1989. Version 2.1. Volume 2

DTIC Science & Technology

1990-06-01

Hg collected on Hopcalite TH media. 4.4.3.2 Basin F Data. Table 4.4-5 shows average and maximum metals values for the Basin F Remedial Monitoring...PMRMA. "Chemical Quality Assurance Plan." Version 1.0, July, 1989. Rathje and Marcero. 1976. "Improved Hopcalite Procedure for the Determination of

Hydrologic Evaluation of Landfill Performance (HELP) Model: B (Set Includes, A- User's Guide for Version 3 w/disks, B-Engineering Documentation for Version 3

EPA Science Inventory

The Hydrologic Evaluation of Landfill Performance (HELP) computer program is a quasi-two-dimensional hydrologic model of water movement across, into, through and out of landfills. The model accepts weather, soil and design data. Landfill systems including various combinations o...

TEDS-M 2008 User Guide for the International Database. Supplement 1: International Version of the TEDS-M Questionnaires

ERIC Educational Resources Information Center

Brese, Falk, Ed.

2012-01-01

The Teacher Education Study in Mathematics (TEDS-M) International Database includes data for all questionnaires administered as part of the TEDS-M study. These consisted of questionnaires administered to future teachers, educators, and institutions with teacher preparation programs. This supplement contains the international version of the TEDS-M…

An Introduction To PC-TRIM.

Treesearch

John R. Mills

1989-01-01

The timber resource inventory model (TRIM) has been adapted to run on person al computers. The personal computer version of TRIM (PC-TRIM) is more widely used than its mainframe parent. Errors that existed in previous versions of TRIM have been corrected. Information is presented to help users with program input and output management in the DOS environment, to...

Mexican/Mexican American Adolescents and "Keepin' It REAL": An Evidence-Based Substance Use Prevention Program

ERIC Educational Resources Information Center

Kulis, Stephen; Marsiglia, Flavio F.; Elek, Elvira; Dustman, Patricia; Wagstaff, David A.; Hecht, Michael L.

2005-01-01

A randomized trial tested the efficacy of three curriculum versions teaching drug resistance strategies, one modeled on Mexican American culture; another modeled on European American and African American culture; and a multicultural version. Self-report data at baseline and 14 months post-intervention were obtained from 3,402 Mexican heritage…

User's manual for the Macintosh version of PASCO

NASA Technical Reports Server (NTRS)

Lucas, S. H.; Davis, Randall C.

1991-01-01

A user's manual for Macintosh PASCO is presented. Macintosh PASCO is an Apple Macintosh version of PASCO, an existing computer code for structural analysis and optimization of longitudinally stiffened composite panels. PASCO combines a rigorous buckling analysis program with a nonlinear mathematical optimization routine to minimize panel mass. Macintosh PASCO accepts the same input as mainframe versions of PASCO. As output, Macintosh PASCO produces a text file and mode shape plots in the form of Apple Macintosh PICT files. Only the user interface for Macintosh is discussed here.

Version 4.0 of code Java for 3D simulation of the CCA model

NASA Astrophysics Data System (ADS)

Fan, Linyu; Liao, Jianwei; Zuo, Junsen; Zhang, Kebo; Li, Chao; Xiong, Hailing

2018-07-01

This paper presents a new version Java code for the three-dimensional simulation of Cluster-Cluster Aggregation (CCA) model to replace the previous version. Many redundant traverses of clusters-list in the program were totally avoided, so that the consumed simulation time is significantly reduced. In order to show the aggregation process in a more intuitive way, we have labeled different clusters with varied colors. Besides, a new function is added for outputting the particle's coordinates of aggregates in file to benefit coupling our model with other models.

Computing Operating Characteristics Of Bearing/Shaft Systems

NASA Technical Reports Server (NTRS)

Moore, James D.

1996-01-01

SHABERTH computer program predicts operating characteristics of bearings in multibearing load-support system. Lubricated and nonlubricated bearings modeled. Calculates loads, torques, temperatures, and fatigue lives of ball and/or roller bearings on single shaft. Provides for analysis of reaction of system to termination of supply of lubricant to bearings and other lubricated mechanical elements. Valuable in design and analysis of shaft/bearing systems. Two versions of SHABERTH available. Cray version (LEW-14860), "Computing Thermal Performances Of Shafts and Bearings". IBM PC version (MFS-28818), written for IBM PC-series and compatible computers running MS-DOS.

UFO (UnFold Operator) computer program abstract

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kissel, L.; Biggs, F.

UFO (UnFold Operator) is an interactive user-oriented computer program designed to solve a wide range of problems commonly encountered in physical measurements. This document provides a summary of the capabilities of version 3A of UFO.

Stewplan: software for creating forest stewardship plans (Version 1.3)

Treesearch

Peter D. Knopp; Mark J. Twery

2003-01-01

Describes the purpose and function of the Stewplan computer program. Provides instructions for loading Stewplan, a tutorial for getting started, and instructions for use. A copy of the program is included. [User's manual; CD-ROM].

Postgraduate nurses' self-assessment of clinical competence and need for further training. A European cross-sectional survey.

PubMed

Wangensteen, Sigrid; Finnbakk, Elisabeth; Adolfsson, Annsofie; Kristjansdottir, Gudrun; Roodbol, Petrie; Ward, Helen; Fagerström, Lisbeth

2018-03-01

Nursing practice requires application of knowledge, skills and values in various combinations and has undergone substantial changes the last decades. An increased focus on inter-professional collaboration and possible new and more independent roles for nurses are described. A variety of programs have been developed in order to educate registered nurses (RN) to meet the changes and demands in health and nursing care throughout the world. The aims were to 1) describe nurses' self-assessment of clinical competence and need for further training, and 2) explore possible differences between nurses in specialist vs master's programs. A cross-sectional survey design was applied. 97 nurses in postgraduate programs from five countries responded (response rate 45%). A revised version of the Professional Nurse Self-Assessment Scale of clinical core competencies (PROFFNurseSASII) was used for data collection. Independent student t-test and regression analyses were carried out. The respondents rated their competence highest in taking full responsibility, cooperation with other health professionals and in acting ethically. Items where they considered themselves needing further training most were competence on medications, interaction and side effects and differential diagnoses. For all items, nurses in master's programs rated their competence higher than nurses in the specialist programs. Nurses in specialist programs rated their need for more training for all items higher than nurses in master's degree programs, and for 47 out of the 50 items these differences were statistically significant. Even though the nurses rated their competence high for important competence aspects such as taking responsibility and cooperation with other health professionals, it is worrying that their need for further training was highest for effects and interaction of various types of medications. Further studies are needed to conclude if and how master's education improves patient outcome. Copyright © 2017 Elsevier Ltd. All rights reserved.

AutoCAD-To-NASTRAN Translator Program

NASA Technical Reports Server (NTRS)

Jones, A.

1989-01-01

Program facilitates creation of finite-element mathematical models from geometric entities. AutoCAD to NASTRAN translator (ACTON) computer program developed to facilitate quick generation of small finite-element mathematical models for use with NASTRAN finite-element modeling program. Reads geometric data of drawing from Data Exchange File (DXF) used in AutoCAD and other PC-based drafting programs. Written in Microsoft Quick-Basic (Version 2.0).

Efficient self-consistency for magnetic tight binding

NASA Astrophysics Data System (ADS)

Soin, Preetma; Horsfield, A. P.; Nguyen-Manh, D.

2011-06-01

Tight binding can be extended to magnetic systems by including an exchange interaction on an atomic site that favours net spin polarisation. We have used a published model, extended to include long-ranged Coulomb interactions, to study defects in iron. We have found that achieving self-consistency using conventional techniques was either unstable or very slow. By formulating the problem of achieving charge and spin self-consistency as a search for stationary points of a Harris-Foulkes functional, extended to include spin, we have derived a much more efficient scheme based on a Newton-Raphson procedure. We demonstrate the capabilities of our method by looking at vacancies and self-interstitials in iron. Self-consistency can indeed be achieved in a more efficient and stable manner, but care needs to be taken to manage this. The algorithm is implemented in the code PLATO. Program summaryProgram title:PLATO Catalogue identifier: AEFC_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEFC_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 228 747 No. of bytes in distributed program, including test data, etc.: 1 880 369 Distribution format: tar.gz Programming language: C and PERL Computer: Apple Macintosh, PC, Unix machines Operating system: Unix, Linux, Mac OS X, Windows XP Has the code been vectorised or parallelised?: Yes. Up to 256 processors tested RAM: Up to 2 Gbytes per processor Classification: 7.3 External routines: LAPACK, BLAS and optionally ScaLAPACK, BLACS, PBLAS, FFTW Catalogue identifier of previous version: AEFC_v1_0 Journal reference of previous version: Comput. Phys. Comm. 180 (2009) 2616 Does the new version supersede the previous version?: Yes Nature of problem: Achieving charge and spin self-consistency in magnetic tight binding can be very difficult. Our existing schemes failed altogether, or were very slow. Solution method: A new scheme for achieving self-consistency in orthogonal tight binding has been introduced that explicitly evaluates the first and second derivatives of the energy with respect to input charge and spin, and then uses these to search for stationary values of the energy. Reasons for new version: Bug fixes and new functionality. Summary of revisions: New charge and spin mixing scheme for orthogonal tight binding. Numerous small bug fixes. Restrictions: The new mixing scheme scales poorly with system size. In particular the memory usage scales as number of atoms to the power 4. It is restricted to systems with about 200 atoms or less. Running time: Test cases will run in a few minutes, large calculations may run for several days.

A user's guide to Sandia's latin hypercube sampling software : LHS UNIX library/standalone version.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swiler, Laura Painton; Wyss, Gregory Dane

2004-07-01

This document is a reference guide for the UNIX Library/Standalone version of the Latin Hypercube Sampling Software. This software has been developed to generate Latin hypercube multivariate samples. This version runs on Linux or UNIX platforms. This manual covers the use of the LHS code in a UNIX environment, run either as a standalone program or as a callable library. The underlying code in the UNIX Library/Standalone version of LHS is almost identical to the updated Windows version of LHS released in 1998 (SAND98-0210). However, some modifications were made to customize it for a UNIX environment and as a librarymore » that is called from the DAKOTA environment. This manual covers the use of the LHS code as a library and in the standalone mode under UNIX.« less

Multiple linear regression analysis

NASA Technical Reports Server (NTRS)

Edwards, T. R.

1980-01-01

Program rapidly selects best-suited set of coefficients. User supplies only vectors of independent and dependent data and specifies confidence level required. Program uses stepwise statistical procedure for relating minimal set of variables to set of observations; final regression contains only most statistically significant coefficients. Program is written in FORTRAN IV for batch execution and has been implemented on NOVA 1200.

The Digital Shoreline Analysis System (DSAS) Version 4.0 - An ArcGIS extension for calculating shoreline change

USGS Publications Warehouse

Thieler, E. Robert; Himmelstoss, Emily A.; Zichichi, Jessica L.; Ergul, Ayhan

2009-01-01

The Digital Shoreline Analysis System (DSAS) version 4.0 is a software extension to ESRI ArcGIS v.9.2 and above that enables a user to calculate shoreline rate-of-change statistics from multiple historic shoreline positions. A user-friendly interface of simple buttons and menus guides the user through the major steps of shoreline change analysis. Components of the extension and user guide include (1) instruction on the proper way to define a reference baseline for measurements, (2) automated and manual generation of measurement transects and metadata based on user-specified parameters, and (3) output of calculated rates of shoreline change and other statistical information. DSAS computes shoreline rates of change using four different methods: (1) endpoint rate, (2) simple linear regression, (3) weighted linear regression, and (4) least median of squares. The standard error, correlation coefficient, and confidence interval are also computed for the simple and weighted linear-regression methods. The results of all rate calculations are output to a table that can be linked to the transect file by a common attribute field. DSAS is intended to facilitate the shoreline change-calculation process and to provide rate-of-change information and the statistical data necessary to establish the reliability of the calculated results. The software is also suitable for any generic application that calculates positional change over time, such as assessing rates of change of glacier limits in sequential aerial photos, river edge boundaries, land-cover changes, and so on.

Measurement properties of the English and Chinese versions of the Functional Assessment of Cancer Therapy-Breast (FACT-B) in Asian breast cancer patients.

PubMed

Ng, Raymond; Lee, Chun Fan; Wong, Nan Soon; Luo, Nan; Yap, Yoon Sim; Lo, Soo Kien; Chia, Whay Kuang; Yee, Alethea; Krishna, Lalit; Goh, Cynthia; Cheung, Yin Bun

2012-01-01

The objective of the study was to examine the measurement properties of and comparability between the English and Chinese versions of the Functional Assessment of Cancer Therapy-Breast (FACT-B) in breast cancer patients in Singapore. This is an observational study of 271 Singaporean breast cancer patients. The known-group validity of FACT-B total score and Trial Outcome Index (TOI) were assessed in relation to performance status, evidence of disease, and treatment status cross-sectionally; responsiveness to change was assessed in relation to change in performance status longitudinally. Internal consistency and test-retest reliability were evaluated by the Cronbach's alpha and intraclass correlation coefficient (ICC), respectively. Multiple regression analyses were performed to compare the scores on the two language versions, adjusting for covariates. The FACT-B total score and TOI demonstrated known-group validity in differentiating patients with different clinical status. They showed high internal consistency and test-retest reliability, with Cronbach's alpha ranging from 0.87 to 0.91 and ICC ranging from 0.82 to 0.89. The English version was responsive to the change in performance status. The Chinese version was shown to be responsive to decline in performance status but the sample size of Chinese-speaking patients who improved in performance status was too small (N = 6) for conclusive analysis about responsiveness to improvement. Two items concerning sexuality had a high item non-response rate (50.2 and 14.4%). No practically significant difference was found in the total score and TOI between the two language versions despite minor differences in two of the 37 items. The English and Chinese versions of the FACT-B are valid, responsive, and reliable instruments in assessing health-related quality of life in breast cancer patients in Singapore. Data collected from the English and Chinese versions can be pooled and either version could be used for bilingual patients.

Focusing on the adult attachment style in schizophrenia in community mental health centres: validation of the Psychosis Attachment Measure (PAM) in a German-speaking sample.

PubMed

Kvrgic, Sara; Beck, Eva-Marina; Cavelti, Marialuisa; Kossowsky, Joe; Stieglitz, Rolf-Dieter; Vauth, Roland

2012-07-01

Assessing attachment style in people with schizophrenia may be important to identify a risk factor in building a strong therapeutic relationship and so indirectly to understand the development of mal-compliance as one of the major obstacles in the treatment of schizophrenia. The present study analysed the psychometric properties of the German version of the Psychosis Attachment Measure (PAM), which assesses avoidant and anxious attachment style. A sample of 127 patients suffering from chronic schizophrenia or schizoaffective disorder participated in this study. In testing discriminant validity, we assessed psychopathology, depression, therapeutic relationship and service engagement. Internal consistency, test-retest reliability and factor structure were analysed. The German version of PAM exhibited acceptable to good internal and test-retest reliabilities and the two-factor structure of the English version could be replicated. Avoidant attachment style was related to higher levels of positive symptoms and to a poorer therapeutic relationship. In the context of external validation, a regression analysis revealed that a poor therapeutic relationship correlated with avoidant attachment style, independent of anxious attachment style and depressive symptoms. Anxious attachment was associated with higher treatment adherence. Both insecure attachment styles (avoidant and anxious) were found to be correlated with higher levels of depression, but only attachment anxiety had an independent predictive value for self-reported depression in regression analysis. The German version of PAM displayed satisfactory psychometric properties and seems to be a reliable measure for assessing attachment style in individuals with schizophrenia. Validation of PAM led to the finding that only the avoidant attachment style might be a risk factor when building a strong therapeutic relationship in schizophrenia. In future studies, other factors influencing therapeutic relationship should be taken into account. Anxious attachment style may be a risk factor for depression, but it also has an enhancing effect on treatment adherence.

Image retrieval and processing system version 2.0 development work

NASA Technical Reports Server (NTRS)

Slavney, Susan H.; Guinness, Edward A.

1991-01-01

The Image Retrieval and Processing System (IRPS) is a software package developed at Washington University and used by the NASA Regional Planetary Image Facilities (RPIF's). The IRPS combines data base management and image processing components to allow the user to examine catalogs of image data, locate the data of interest, and perform radiometric and geometric calibration of the data in preparation for analysis. Version 1.0 of IRPS was completed in Aug. 1989 and was installed at several IRPS's. Other RPIF's use remote logins via NASA Science Internet to access IRPS at Washington University. Work was begun on designing and population a catalog of Magellan image products that will be part of IRPS Version 2.0, planned for release by the end of calendar year 1991. With this catalog, a user will be able to search by orbit and by location for Magellan Basic Image Data Records (BIDR's), Mosaicked Image Data Records (MIDR's), and Altimetry-Radiometry Composite Data Records (ARCDR's). The catalog will include the Magellan CD-ROM volume, director, and file name for each data product. The image processing component of IRPS is based on the Planetary Image Cartography Software (PICS) developed by the U.S. Geological Survey, Flagstaff, Arizona. To augment PICS capabilities, a set of image processing programs were developed that are compatible with PICS-format images. This software includes general-purpose functions that PICS does not have, analysis and utility programs for specific data sets, and programs from other sources that were modified to work with PICS images. Some of the software will be integrated into the Version 2.0 release of IRPS. A table is presented that lists the programs with a brief functional description of each.

[Violence prevention in secondary schools: the Faustlos-curriculum for middle school].

PubMed

Schick, Andreas; Cierpka, Manfred

2009-01-01

Schools and kindergartens are particularly suitable for the implementation of violence prevention programs. Many German schools and kindergartens have securely established the violence prevention curriculum Faustlos. The Faustlos programs for kindergartens and elementary schools are now complemented with the version for middle schools. As the kindergarten- and elementary school versions the middle school program too focuses on the theoretically profound, age group-tailored promotion of empathy, impulse control and anger management. These dimensions are subdivided into the five themes "understanding the problem" "training for empathy"; "anger management", "problem solving" and "applying skills" and taught stepwise, highly structured and based on several video sequences in 31 lessons. US-American evaluation studies proof the effectiveness and the violence prevention potential of the program. With the curriculum for middle schools a comprehensive Faustlos program package is now made available to sustainably promote core violence prevention competences of children and adolescents on a developmentally appropriate level and with a consistent didactic approach.

Application of Artificial Intelligence (AI) Programming Techniques to Tactical Guidance for Fighter Aircraft

NASA Technical Reports Server (NTRS)

McManus, John W.; Goodrich, Kenneth H.

1989-01-01

A research program investigating the use of Artificial Intelligence (AI) techniques to aid in the development of a Tactical Decision Generator (TDG) for Within-Visual-Range (WVR) air combat engagements is discussed. The application of AI methods for development and implementation of the TDG is presented. The history of the Adaptive Maneuvering Logic (AML) program is traced and current versions of the AML program are compared and contrasted with the TDG system. The Knowledge-Based Systems (KBS) used by the TDG to aid in the decision-making process are outlined in detail and example rules are presented. The results of tests to evaluate the performance of the TDG versus a version of AML and versus human pilots in the Langley Differential Maneuvering Simulator (DMS) are presented. To date, these results have shown significant performance gains in one-versus-one air combat engagements, and the AI-based TDG software has proven to be much easier to modify than the updated FORTRAN AML programs.

Clarifying the Links Among Online Gaming, Internet Use, Drinking Motives, and Online Pornography Use.

PubMed

Bőthe, Beáta; Tóth-Király, István; Orosz, Gábor

2015-04-01

This study was aimed at investigating the links between online gaming and online pornography use by considering gender, problematic Internet use, and different motives for alcohol drinking. University students (n=512; mean age=22.11 years; standard deviation=2.43 years; 64.06 percent women) filled in the Cyber Pornography Use Inventory, Hungarian version, the Problematic Online Gaming Questionnaire, Hungarian version (POGQ-HU), the Problematic Internet Use Questionnaire, Hungarian version (PIUQ-HU), and the Drinking Motive Questionnaire Revised Short Form, Hungarian version (DMQ-R-HU SF) questionnaires. According to hierarchical multiple regression analyses, the neglect factor of PIUQ-HU, the conformity factor of DMQ-R-HU SF, and the immersion and preoccupation factors of POGQ-HU have a significant predictive value on one's online pornography use, but gender does not. This research shows that independently from the effect of Internet and alcohol use dimensions, immersion and preoccupation factors of online gaming have significant effects on online pornography use. However, preoccupation has a negative effect on pornography use. Players scoring high on this subscale may think about gaming as the only interesting activity that rates higher than even pornography.

Electronic laboratory quality assurance program: A method of enhancing the prosthodontic curriculum and addressing accreditation standards.

PubMed

Moghadam, Marjan; Jahangiri, Leila

2015-08-01

An electronic quality assurance (eQA) program was developed to replace a paper-based system and to address standards introduced by the Commission on Dental Accreditation (CODA) and to improve educational outcomes. This eQA program provides feedback to predoctoral dental students on prosthodontic laboratory steps at New York University College of Dentistry. The purpose of this study was to compare the eQA program of performing laboratory quality assurance with the former paper-based format. Fourth-year predoctoral dental students (n=334) who experienced both the paper-based and the electronic version of the quality assurance program were surveyed about their experiences. Additionally, data extracted from the eQA program were analyzed to identify areas of weakness in the curriculum. The study findings revealed that 73.8% of the students preferred the eQA program to the paper-based version. The average number of treatments that did not pass quality assurance standards was 119.5 per month. This indicated a 6.34% laboratory failure rate. Further analysis of these data revealed that 62.1% of the errors were related to fixed prosthodontic treatment, 27.9% to partial removable dental prostheses, and 10% to complete removable dental prostheses in the first 18 months of program implementation. The eQA program was favored by dental students who have experienced both electronic and paper-based versions of the system. Error type analysis can yield the ability to create customized faculty standardization sessions and refine the didactic and clinical teaching of the predoctoral students. This program was also able to link patient care activity with the student's laboratory activities, thus addressing the latest requirements of the CODA regarding the competence of graduates in evaluating laboratory work related to their patient care. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

C++QEDv2 Milestone 10: A C++/Python application-programming framework for simulating open quantum dynamics

NASA Astrophysics Data System (ADS)

Sandner, Raimar; Vukics, András

2014-09-01

The v2 Milestone 10 release of C++QED is primarily a feature release, which also corrects some problems of the previous release, especially as regards the build system. The adoption of C++11 features has led to many simplifications in the codebase. A full doxygen-based API manual [1] is now provided together with updated user guides. A largely automated, versatile new testsuite directed both towards computational and physics features allows for quickly spotting arising errors. The states of trajectories are now savable and recoverable with full binary precision, allowing for trajectory continuation regardless of evolution method (single/ensemble Monte Carlo wave-function or Master equation trajectory). As the main new feature, the framework now presents Python bindings to the highest-level programming interface, so that actual simulations for given composite quantum systems can now be performed from Python. Catalogue identifier: AELU_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AELU_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: yes No. of lines in distributed program, including test data, etc.: 492422 No. of bytes in distributed program, including test data, etc.: 8070987 Distribution format: tar.gz Programming language: C++/Python. Computer: i386-i686, x86 64. Operating system: In principle cross-platform, as yet tested only on UNIX-like systems (including Mac OS X). RAM: The framework itself takes about 60MB, which is fully shared. The additional memory taken by the program which defines the actual physical system (script) is typically less than 1MB. The memory storing the actual data scales with the system dimension for state-vector manipulations, and the square of the dimension for density-operator manipulations. This might easily be GBs, and often the memory of the machine limits the size of the simulated system. Classification: 4.3, 4.13, 6.2. External routines: Boost C++ libraries, GNU Scientific Library, Blitz++, FLENS, NumPy, SciPy Catalogue identifier of previous version: AELU_v1_0 Journal reference of previous version: Comput. Phys. Comm. 183 (2012) 1381 Does the new version supersede the previous version?: Yes Nature of problem: Definition of (open) composite quantum systems out of elementary building blocks [2,3]. Manipulation of such systems, with emphasis on dynamical simulations such as Master-equation evolution [4] and Monte Carlo wave-function simulation [5]. Solution method: Master equation, Monte Carlo wave-function method Reasons for new version: The new version is mainly a feature release, but it does correct some problems of the previous version, especially as regards the build system. Summary of revisions: We give an example for a typical Python script implementing the ring-cavity system presented in Sec. 3.3 of Ref. [2]: Restrictions: Total dimensionality of the system. Master equation-few thousands. Monte Carlo wave-function trajectory-several millions. Unusual features: Because of the heavy use of compile-time algorithms, compilation of programs written in the framework may take a long time and much memory (up to several GBs). Additional comments: The framework is not a program, but provides and implements an application-programming interface for developing simulations in the indicated problem domain. We use several C++11 features which limits the range of supported compilers (g++ 4.7, clang++ 3.1) Documentation, http://cppqed.sourceforge.net/ Running time: Depending on the magnitude of the problem, can vary from a few seconds to weeks. References: [1] Entry point: http://cppqed.sf.net [2] A. Vukics, C++QEDv2: The multi-array concept and compile-time algorithms in the definition of composite quantum systems, Comp. Phys. Comm. 183(2012)1381. [3] A. Vukics, H. Ritsch, C++QED: an object-oriented framework for wave-function simulations of cavity QED systems, Eur. Phys. J. D 44 (2007) 585. [4] H. J. Carmichael, An Open Systems Approach to Quantum Optics, Springer, 1993. [5] J. Dalibard, Y. Castin, K. Molmer, Wave-function approach to dissipative processes in quantum optics, Phys. Rev. Lett. 68 (1992) 580.

Uveal Melanoma Regression after Brachytherapy: Relationship with Chromosome 3 Monosomy Status.

PubMed

Salvi, Sachin M; Aziz, Hassan A; Dar, Suhail; Singh, Nakul; Hayden-Loreck, Brandy; Singh, Arun D

2017-07-01

The objective was to evaluate the relationship between the regression rate of ciliary body melanoma and choroidal melanoma after brachytherapy and chromosome 3 monosomy status. We conducted a prospective and consecutive case series of patients who underwent biopsy and brachytherapy for ciliary/choroidal melanoma. Tumor biopsy performed at the time of radiation plaque placement was analyzed with fluorescence in situ hybridization to determine the percentage of tumor cells with chromosome 3 monosomy. The regression rate was calculated as the percent change in tumor height at months 3, 6, and 12. The relationship between regression rate and tumor location, initial tumor height, and chromosome 3 monosomy (percentage) was assessed by univariate linear regression (R version 3.1.0). Of the 75 patients included in the study, 8 had ciliary body melanoma, and 67 were choroidal melanomas. The mean tumor height at the time of diagnosis was 5.2 mm (range: 1.90-13.00). The percentage composition of chromosome 3 monosomy ranged from 0-20% (n = 35) to 81-100% (n = 40). The regression of tumor height at months 3, 6, and 12 did not statistically correlate with tumor location (ciliary or choroidal), initial tumor height, or chromosome 3 monosomy (percentage). The regression rate of choroidal melanoma following brachytherapy did not correlate with chromosome 3 monosomy status.