Combining theory and experiment for X-ray absorption spectroscopy and resonant X-ray scattering characterization of polymers

DOE PAGES

Su, Gregory M.; Cordova, Isvar A.; Brady, Michael A.; ...

2016-07-04

We present that an improved understanding of fundamental chemistry, electronic structure, morphology, and dynamics in polymers and soft materials requires advanced characterization techniques that are amenable to in situ and operando studies. Soft X-ray methods are especially useful in their ability to non-destructively provide information on specific materials or chemical moieties. Analysis of these experiments, which can be very dependent on X-ray energy and polarization, can quickly become complex. Complementary modeling and predictive capabilities are required to properly probe these critical features. Here, we present relevant background on this emerging suite of techniques. Finally, we focus on how the combinationmore » of theory and experiment has been applied and can be further developed to drive our understanding of how these methods probe relevant chemistry, structure, and dynamics in soft materials.« less

Quality Control of Next-generation Sequencing-based In vitro Diagnostic Test for Onco-relevant Mutations Using Multiplex Reference Materials in Plasma.

PubMed

Liu, Donglai; Zhou, Haiwei; Shi, Dawei; Shen, Shu; Tian, Yabin; Wang, Lin; Lou, Jiatao; Cong, Rong; Lu, Juan; Zhang, Henghui; Zhao, Meiru; Zhu, Shida; Cao, Zhisheng; Jin, Ruilin; Wang, Yin; Zhang, Xiaoni; Yang, Guohua; Wang, Youchun; Zhang, Chuntao

2018-01-01

Background: Widespread clinical implementation of next-generation sequencing (NGS)-based cancer in vitro diagnostic tests (IVDs) highlighted the urgency to establish reference materials which could provide full control of the process from nucleic acid extraction to test report generation. The formalin-fixed, paraffin-embedded (FFPE) tissue and blood plasma containing circulating tumor deoxyribonucleic acid (ctDNA) were mostly used for clinically detecting onco-relevant mutations. Methods: We respectively developed multiplex FFPE and plasma reference materials covering three clinically onco-relevant mutations within the epidermal growth factor receptor ( EGFR ) gene at serial allelic frequencies. All reference materials were quantified and validated via droplet digital polymerase chain reaction (ddPCR), and then were distributed to eight domestic manufacturers for the collaborative evaluation of the performance of several domestic NGS-based cancer IVDs covering four major NGS platforms (NextSeq, HiSeq, Ion Proton and BGISEQ). Results: All expected mutations except one at extremely low allelic frequencies were detected, despite some differences in coefficient of variation (CV) which increased with the decrease of allelic frequency (CVs ranging from 18% to 106%). It was worth noting that the CV value seemed to correlate with a particular mutation as well. The repeatability of determination of different mutations was L858R>T790M>19del. Conclusions: The results indicated our reference materials would be pivotal for quality control of NGS-based cancer IVDs and would guide the further development of reference materials covering more onco-relevant mutations.

High-Pressure Oxygen Test Evaluations

NASA Technical Reports Server (NTRS)

Schwinghamer, R. J.; Key, C. F.

1974-01-01

The relevance of impact sensitivity testing to the development of the space shuttle main engine is discussed in the light of the special requirements for the engine. The background and history of the evolution of liquid and gaseous oxygen testing techniques and philosophy is discussed also. The parameters critical to reliable testing are treated in considerable detail, and test apparatus and procedures are described and discussed. Materials threshold sensitivity determination procedures are considered and a decision logic diagram for sensitivity threshold determination was plotted. Finally, high-pressure materials sensitivity test data are given for selected metallic and nonmetallic materials.

The Negative Numbers. A Source-Work Collection for In-Service and Pre-Service Teacher Courses.

ERIC Educational Resources Information Center

Arcavi, A.; Bruckheimer, M.

These materials on negative numbers are designed for use in workshops for pre- and in-service teacher training, especially for teachers in junior high schools. The general aims are: to improve teachers' mathematical knowledge of topics, to enrich teachers' mathematical background, to allow opportunity to discuss relevant didactics, and to create a…

The Irrational Numbers. A Source-Work Collection for In-Service and Pre-Service Teacher Courses.

ERIC Educational Resources Information Center

Arcavi, A.; Bruckheimer, M.

These materials on irrational numbers are designed for use in workshops for pre- and in-service teacher training, especially for teachers in junior high schools. The general aims are: to improve teachers' mathematical knowledge of topics, to enrich teachers' mathematical background, to allow opportunity to discuss relevant didactics, and to create…

The American College President, 1636-1989: A Critical Review and Bibliography. Bibliographies and Indexes in Education Number 10.

ERIC Educational Resources Information Center

Sontz, Ann H. L.

This 1,386-entry bibliography includes materials relevant to early American and nineteenth-century academic presidencies and encompasses a specialized corpus of literature written by academic administrators since the early 1960s. The bibliography is divided into four general areas: bibliographies; background sources; biographies; and presidential…

Culturally relevant science: An approach to math science education for hispanics. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Montellano, B.O. de

1996-11-14

This progress report summarizes results of a teacher workshop. A letter sent to 17 teachers who had participated in the workshop requested a report of any activities undertaken and copies of lesson plans and materials developed. Only nine responses were received, and not all of them demonstrated a satisfactory level of activity. Teachers who submitted materials showing the most promise were invited to participate in the Summer Writing Workshop. A partial first draft of a companion volume for the teacher`s manual was written which provides a rationale for culturally relevant science and presents the cultural and scientific background needed. Themore » outline of the book is presented in Appendix 1. Appendix 2 is a sample chapter from the book.« less

The U.S. national nuclear forensics library, nuclear materials information program, and data dictionary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lamont, Stephen Philip; Brisson, Marcia; Curry, Michael

2011-02-17

Nuclear forensics assessments to determine material process history requires careful comparison of sample data to both measured and modeled nuclear material characteristics. Developing centralized databases, or nuclear forensics libraries, to house this information is an important step to ensure all relevant data will be available for comparison during a nuclear forensics analysis and help expedite the assessment of material history. The approach most widely accepted by the international community at this time is the implementation of National Nuclear Forensics libraries, which would be developed and maintained by individual nations. This is an attractive alternative toan international database since it providesmore » an understanding that each country has data on materials produced and stored within their borders, but eliminates the need to reveal any proprietary or sensitive information to other nations. To support the concept of National Nuclear Forensics libraries, the United States Department of Energy has developed a model library, based on a data dictionary, or set of parameters designed to capture all nuclear forensic relevant information about a nuclear material. Specifically, information includes material identification, collection background and current location, analytical laboratories where measurements were made, material packaging and container descriptions, physical characteristics including mass and dimensions, chemical and isotopic characteristics, particle morphology or metallurgical properties, process history including facilities, and measurement quality assurance information. While not necessarily required, it may also be valuable to store modeled data sets including reactor burn-up or enrichment cascade data for comparison. It is fully expected that only a subset of this information is available or relevant to many materials, and much of the data populating a National Nuclear Forensics library would be process analytical or material accountability measurement data as opposed to a complete forensic analysis of each material in the library.« less

Caregiver and Adult Patient Perspectives on the Importance of a Diagnosis of 22q11.2 Deletion Syndrome

ERIC Educational Resources Information Center

Costain, G.; Chow, E. W. C.; Ray, P. N.; Bassett, A. S.

2012-01-01

Background: Recent advances in genetics are particularly relevant in the field of intellectual disability (ID), where sub-microscopic deletions or duplications of genetic material are increasingly implicated as known or suspected causal factors. Data-driven reports on the impact of providing an aetiological explanation in ID are needed to help…

Materials for Paediatric Dentistry. Part 1: Background to the Treatment of Carious Primary Teeth.

PubMed

Jenkins, Natalie

2015-12-01

Dental caries is a disease that affects many people, including children, and presents numerous challenges to healthcare providers. As clinicians it is important that we consider the advantages and disadvantages of treating carious primary teeth, and make an informed decision about when it is appropriate or not. This paper describes the background to the treatment of carious primary teeth, looking at the differences between primary and permanent teeth, and the relevance of this. It also suggests points to consider when looking at restoration survival studies, as the ability to appraise the literature critically is important for us all in this 'evidence-based' age. CPD/Clinical Relevance: Our early life experiences have the ability to shape our future attitudes and behaviour. Children with carious teeth require careful management so that pain and suffering is minimized, and positive attitudes towards dentistry are fostered.

21st Century Skills and Competences for New Millennium Learners in OECD Countries. OECD Education Working Papers, No. 41

ERIC Educational Resources Information Center

Ananiadou, Katerina; Claro, Magdalean

2009-01-01

This paper discusses issues related to the teaching and assessment of 21st century skills and competencies in OECD countries drawing on the findings of a questionnaire study and other relevant background material such as white papers or curriculum documents. Although all OECD countries were invited to participate in the questionnaire survey,…

Quantifying the risks of solid aerosol geoengineering: the role of fundamental material properties

NASA Astrophysics Data System (ADS)

Dykema, J. A.; Keutsch, F. N.; Keith, D.

2017-12-01

Solid aerosols have been considered as an alternative to sulfate aerosols for solar geoengineering due to their optical and chemical properties, which lead to different and possibly more attractive risk profiles. Solid aerosols can achieve higher solar scattering efficiency due to their higher refractive index, and in some cases may also be less effective absorbers of thermal infrared radiation. The optical properties of solid aerosols are however sensitive functions of the detailed physical properties of solid materials in question. The relevant details include the exact crystalline structure of the aerosols, the physical size of the particles, and interactions with background stratospheric molecular and particulate constituents. In this work, we examine the impact of these detailed physical properties on the radiative properties of calcite (CaCO3) solid aerosols. We examine how crystal morphology, size, chemical reactions, and interaction with background stratospheric aerosol may alter the scattering and absorption properties of calcite aerosols for solar and thermal infrared radiation. For example, in small particles, crystal lattice vibrations associated with the particle surface may lead to substantially different infrared absorption properties than bulk materials. We examine the wavelength dependence of absorption by the particles, which may lead to altered patterns of stratospheric radiative heating and equilibrium temperatures. Such temperature changes can lead to dynamical changes, with consequences for both stratospheric composition and tropospheric climate. We identify important uncertainties in the current state of understanding, investigate risks associated with these uncertainties, and survey potential approaches to quantitatively improving our knowledge of the relevant material properties.

Sensitivity of WallDYN material migration modeling to uncertainties in mixed-material surface binding energies

DOE PAGES

Nichols, J. H.; Jaworski, M. A.; Schmid, K.

2017-03-09

The WallDYN package has recently been applied to a number of tokamaks to self-consistently model the evolution of mixed-material plasma facing surfaces. A key component of the WallDYN model is the concentration-dependent surface sputtering rate, calculated using SDTRIM.SP. This modeled sputtering rate is strongly influenced by the surface binding energies (SBEs) of the constituent materials, which are well known for pure elements but often are poorly constrained for mixed-materials. This work examines the sensitivity of WallDYN surface evolution calculations to different models for mixed-material SBEs, focusing on the carbon/lithium/oxygen/deuterium system present in NSTX. A realistic plasma background is reconstructed frommore » a high density, H-mode NSTX discharge, featuring an attached outer strike point with local density and temperature of 4 × 10 20 m -3 and 4 eV, respectively. It is found that various mixed-material SBE models lead to significant qualitative and quantitative changes in the surface evolution profile at the outer divertor, with the highest leverage parameter being the C-Li binding model. Uncertainties of order 50%, appearing on time scales relevant to tokamak experiments, highlight the importance of choosing an appropriate mixed-material sputtering representation when modeling the surface evolution of plasma facing components. Lastly, these results are generalized to other fusion-relevant materials with different ranges of SBEs.« less

Sensitivity of WallDYN material migration modeling to uncertainties in mixed-material surface binding energies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nichols, J. H.; Jaworski, M. A.; Schmid, K.

The WallDYN package has recently been applied to a number of tokamaks to self-consistently model the evolution of mixed-material plasma facing surfaces. A key component of the WallDYN model is the concentration-dependent surface sputtering rate, calculated using SDTRIM.SP. This modeled sputtering rate is strongly influenced by the surface binding energies (SBEs) of the constituent materials, which are well known for pure elements but often are poorly constrained for mixed-materials. This work examines the sensitivity of WallDYN surface evolution calculations to different models for mixed-material SBEs, focusing on the carbon/lithium/oxygen/deuterium system present in NSTX. A realistic plasma background is reconstructed frommore » a high density, H-mode NSTX discharge, featuring an attached outer strike point with local density and temperature of 4 × 10 20 m -3 and 4 eV, respectively. It is found that various mixed-material SBE models lead to significant qualitative and quantitative changes in the surface evolution profile at the outer divertor, with the highest leverage parameter being the C-Li binding model. Uncertainties of order 50%, appearing on time scales relevant to tokamak experiments, highlight the importance of choosing an appropriate mixed-material sputtering representation when modeling the surface evolution of plasma facing components. Lastly, these results are generalized to other fusion-relevant materials with different ranges of SBEs.« less

Cosmogenic production of tritium in dark matter detectors

NASA Astrophysics Data System (ADS)

Amaré, J.; Castel, J.; Cebrián, S.; Coarasa, I.; Cuesta, C.; Dafni, T.; Galán, J.; García, E.; Garza, J. G.; Iguaz, F. J.; Irastorza, I. G.; Luzón, G.; Martínez, M.; Mirallas, H.; Oliván, M. A.; Ortigoza, Y.; Ortiz de Solórzano, A.; Puimedón, J.; Ruiz-Chóliz, E.; Sarsa, M. L.; Villar, J. A.; Villar, P.

2018-01-01

The direct detection of dark matter particles requires ultra-low background conditions at energies below a few tens of keV. Radioactive isotopes are produced via cosmogenic activation in detectors and other materials and those isotopes constitute a background source which has to be under control. In particular, tritium is specially relevant due to its decay properties (very low endpoint energy and long half-life) when induced in the detector medium, and because it can be generated in any material as a spallation product. Quantification of cosmogenic production of tritium is not straightforward, neither experimentally nor by calculations. In this work, a method for the calculation of production rates at sea level has been developed and applied to some of the materials typically used as targets in dark matter detectors (germanium, sodium iodide, argon and neon); it is based on a selected description of tritium production cross sections over the entire energy range of cosmic nucleons. Results have been compared to available data in the literature, either based on other calculations or from measurements. The obtained tritium production rates, ranging from a few tens to a few hundreds of nuclei per kg and per day at sea level, point to a significant contribution to the background in dark matter experiments, requiring the application of specific protocols for target material purification, material storing underground and limiting the time the detector is on surface during the building process in order to minimize the exposure to the most dangerous cosmic ray components.

INFORMATION STORAGE AND RETRIEVAL, A STATE-OF-THE-ART REPORT

DTIC Science & Technology

The objective of the study was to compile relevant background and interpretive material and prepare a state-of-the-art report which would put the...to-person communications. Section III presents basic IS and R concepts and techniques. It traces the history of traditional librarianship through...the process of communication between the originators and users of information. Section V categorizes the information system operations required to

Radiopurity assessment of the energy readout for the NEXT double beta decay experiment

NASA Astrophysics Data System (ADS)

Cebrián, S.; Pérez, J.; Bandac, I.; Labarga, L.; Álvarez, V.; Azevedo, C. D. R.; Benlloch-Rodríguez, J. M.; Borges, F. I. G. M.; Botas, A.; Cárcel, S.; Carrión, J. V.; Conde, C. A. N.; Díaz, J.; Diesburg, M.; Escada, J.; Esteve, R.; Felkai, R.; Fernandes, L. M. P.; Ferrario, P.; Ferreira, A. L.; Freitas, E. D. C.; Goldschmidt, A.; Gómez-Cadenas, J. J.; González-Díaz, D.; Gutiérrez, R. M.; Hauptman, J.; Henriques, C. A. O.; Hernandez, A. I.; Hernando Morata, J. A.; Herrero, V.; Jones, B. J. P.; Laing, A.; Lebrun, P.; Liubarsky, I.; López-March, N.; Losada, M.; Martín-Albo, J.; Martínez-Lema, G.; Martínez, A.; McDonald, A. D.; Monrabal, F.; Monteiro, C. M. B.; Mora, F. J.; Moutinho, L. M.; Muñoz Vidal, J.; Musti, M.; Nebot-Guinot, M.; Novella, P.; Nygren, D. R.; Palmeiro, B.; Para, A.; Querol, M.; Renner, J.; Ripoll, L.; Rodríguez, J.; Rogers, L.; Santos, F. P.; dos Santos, J. M. F.; Simón, A.; Sofka, C.; Sorel, M.; Stiegler, T.; Toledo, J. F.; Torrent, J.; Tsamalaidze, Z.; Veloso, J. F. C. A.; Villar, J. A.; Webb, R.; White, J. T.; Yahlali, N.

2017-08-01

The "Neutrino Experiment with a Xenon Time-Projection Chamber" (NEXT) experiment intends to investigate the neutrinoless double beta decay of 136Xe, and therefore requires a severe suppression of potential backgrounds. An extensive material screening and selection process was undertaken to quantify the radioactivity of the materials used in the experiment. Separate energy and tracking readout planes using different sensors allow us to combine the measurement of the topological signature of the event for background discrimination with the energy resolution optimization. The design of radiopure readout planes, in direct contact with the gas detector medium, was especially challenging since the required components typically have activities too large for experiments demanding ultra-low background conditions. After studying the tracking plane, here the radiopurity control of the energy plane is presented, mainly based on gamma-ray spectroscopy using ultra-low background germanium detectors at the Laboratorio Subterr&aposaneo de Canfranc (Spain). All the available units of the selected model of photomultiplier have been screened together with most of the components for the bases, enclosures and windows. According to these results for the activity of the relevant radioisotopes, the selected components of the energy plane would give a contribution to the overall background level in the region of interest of at most 2.4×10-4 counts keV-1 kg-1 y-1, satisfying the sensitivity requirements of the NEXT experiment.

Readability and Content of Patient Education Material Related to Implantable Cardioverter Defibrillators

PubMed Central

Strachan, Patricia H.; de Laat, Sonya; Carroll, Sandra L.; Schwartz, Lisa; Vaandering, Katie; Toor, Gurjit K.; Arthur, Heather M.

2012-01-01

Background Implantable cardioverter defibrillators (ICDs) are increasingly offered to patients for primary prevention of sudden cardiac death. Candidates for ICD receive ICD-related patient education material when they make decisions to consent or decline a primary prevention ICD. Printed patient education material directed at ICD candidates has not been the focus of direct appraisal. Objective We evaluated the readability and content of ICD-related print education materials made available to patients who were enrolled in a study involving patient decision making for ICD from 3 ICD sites in southern Ontario, Canada. Methods All ICD print materials referred to during interviews and/or that were available in ICD site waiting rooms were collected for analysis. Readability testing was conducted using the SMOG (“simple measurement of gobbledygook”) and Fry methods. The material was evaluated according to selected plain-language criteria, thematic content analysis, and rhetoric analysis. Results Twenty-one print materials were identified and analyzed. Documents were authored by device manufacturers, tertiary care hospitals, and cardiac support organizations. Although many documents adhered to plain-language recommendations, text-reading levels were higher than recommended. Twelve major content themes were identified. Content focused heavily on the positive aspects of living with the device to the exclusion of other possible information that could be relevant to the decisions that patients made. Conclusions Print-based patient education materials for ICD candidates are geared to a highly literate population. The focus on positive information to the exclusion of potentially negative aspects of the ICD, or alternatives to accepting 1, could influence and/or confuse patients about the purpose and implications of this medical device. Development of print materials is indicated that includes information about possible problems and that would be relevant for the multicultural and debilitated population who may require ICDs. The findings are highly relevant for nurses who care for primary prevention ICD candidates. PMID:21926915

Production and relevance of cosmogenic radionuclides in NaI(Tl) crystals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amaré, J.; Cebrián, S.; Cuesta, C.

2015-08-17

The cosmogenic production of long-lived radioactive isotopes in materials is an hazard for experiments demanding ultra-low background conditions. Although NaI(Tl) scintillators have been used in this context for a long time, very few activation data were available. We present results from two 12.5 kg NaI(Tl) detectors, developed within the ANAIS project and installed at the Canfranc Underground Laboratory. The prompt data taking starting made possible a reliable quantification of production of some I, Te and Na isotopes with half-lives larger than ten days. Tnitial activities underground were measured and then production rates at sea level were estimated following the history ofmore » detectors; a comparison of these rates with calculations using typical cosmic neutron flux at sea level and a selected description of excitation functions was also carried out. After including the contribution from the identified cosmogenic products in the detector background model, we found that the presence of {sup 3}H in the crystal bulk would help to fit much better our background model and experimental data. We have analyzed the cosmogenic production of {sup 3}H in NaI, and although precise quantification has not been attempted, we can conclude that it could imply a very relevant contribution to the total background below 15 ke in NaI detectors.« less

The Effects of Goal Relevance and Perceptual Features on Emotional Items and Associative Memory

PubMed Central

Mao, Wei B.; An, Shu; Yang, Xiao F.

2017-01-01

Showing an emotional item in a neutral background scene often leads to enhanced memory for the emotional item and impaired associative memory for background details. Meanwhile, both top–down goal relevance and bottom–up perceptual features played important roles in memory binding. We conducted two experiments and aimed to further examine the effects of goal relevance and perceptual features on emotional items and associative memory. By manipulating goal relevance (asking participants to categorize only each item image as living or non-living or to categorize each whole composite picture consisted of item image and background scene as natural scene or manufactured scene) and perceptual features (controlling visual contrast and visual familiarity) in two experiments, we found that both high goal relevance and salient perceptual features (high salience of items vs. high familiarity of items) could promote emotional item memory, but they had different effects on associative memory for emotional items and neutral backgrounds. Specifically, high goal relevance and high perceptual-salience of items could jointly impair the associative memory for emotional items and neutral backgrounds, while the effect of item familiarity on associative memory for emotional items would be modulated by goal relevance. High familiarity of items could increase associative memory for negative items and neutral backgrounds only in the low goal relevance condition. These findings suggest the effect of emotion on associative memory is not only related to attentional capture elicited by emotion, but also can be affected by goal relevance and perceptual features of stimulus. PMID:28790943

The Effects of Goal Relevance and Perceptual Features on Emotional Items and Associative Memory.

PubMed

Mao, Wei B; An, Shu; Yang, Xiao F

2017-01-01

Showing an emotional item in a neutral background scene often leads to enhanced memory for the emotional item and impaired associative memory for background details. Meanwhile, both top-down goal relevance and bottom-up perceptual features played important roles in memory binding. We conducted two experiments and aimed to further examine the effects of goal relevance and perceptual features on emotional items and associative memory. By manipulating goal relevance (asking participants to categorize only each item image as living or non-living or to categorize each whole composite picture consisted of item image and background scene as natural scene or manufactured scene) and perceptual features (controlling visual contrast and visual familiarity) in two experiments, we found that both high goal relevance and salient perceptual features (high salience of items vs. high familiarity of items) could promote emotional item memory, but they had different effects on associative memory for emotional items and neutral backgrounds. Specifically, high goal relevance and high perceptual-salience of items could jointly impair the associative memory for emotional items and neutral backgrounds, while the effect of item familiarity on associative memory for emotional items would be modulated by goal relevance. High familiarity of items could increase associative memory for negative items and neutral backgrounds only in the low goal relevance condition. These findings suggest the effect of emotion on associative memory is not only related to attentional capture elicited by emotion, but also can be affected by goal relevance and perceptual features of stimulus.

Flowable Resin Composites: A Systematic Review and Clinical Considerations

PubMed Central

Rodrigues, Jean C.

2015-01-01

Background Little is known about flowable composite materials. Most literature mentions conventional composite materials at large, giving minimal emphasis to flowables in particular. This paper briefly gives an in depth insight to the multiple facets of this versatile material. Aim To exclusively review the most salient features of flowable composite materials in comparison to conventional composites and to give clinicians a detailed understanding of the advantages, drawbacks, indications and contraindications based on composition and physical/mechanical properties. Methodology Data Sources: A thorough literature search from the year 1996 up to January 2015 was done on PubMed Central, The Cochrane Library, Science Direct, Wiley Online Library, and Google Scholar. Grey literature (pending patents, technical reports etc.) was also screened. The search terms used were “dental flowable resin composites”. Search Strategy After omitting the duplicates/repetitions, a total of 491 full text articles were assessed. As including all articles were out of the scope of this paper. Only relevant articles that fulfilled the reviewer’s objectives {mentioning indications, contraindications, applications, assessment of physical/mechanical/biological properties (in vitro/ in vivo /ex vivo)} were considered. A total of 92 full text articles were selected. Conclusion Flowable composites exhibit a variable composition and consequently variable mechanical/ physical properties. Clinicians must be aware of this aspect to make a proper material selection based on specific properties and indications of each material relevant to a particular clinical situation. PMID:26266238

Evaluation of the e-Learning material developed by EMERALD and EMIT for diagnostic imaging and radiotherapy.

PubMed

Aitken, Victoria; Tabakov, Slavik

2005-09-01

Two Leonardo projects, EMERALD and EMIT, have developed in a partnershipof university and hospital departments (the consortia) e-Learning materials in X-ray diagnostic radiology, nuclear medicine, radiotherapy, ultrasound and magnetic resonance imaging for medical physics graduates and other healthcare professionals. These e-Learning materials are described in a separate paper in this issue. To assess the effectiveness and relevance of the e-Learning material, a series of evaluations by student users groups plus experts in medical physics education and training were undertaken. The students, with backgrounds in physics and clinical ultrasound, reviewed the e-Learning material using an evaluation form developed by the consortia. The student feedback was favourable with students commenting that their level of knowledge had increased having completed the tasks. Areas identified for development were a reduction in text volume and an increase in the time allowed for completion of some tasks. The feedback from the experts was positive with an overall appreciation of the value of the learning material as a resource for students in medical physics field across Europe and identified other disciplines in which the access to the learning material could be useful contribution to their learning. Suggestions made for improvements ranged from grading the tasks into basic and advanced topics to increasing the interactive nature of the material. These early evaluation of the e-Learning material look promising and provide a framework for further developments in the field. Insight into users and providers views is important if developers are to provide relevant and worthwhile educational learning opportunities.

Towards clinically translatable in vivo nanodiagnostics

NASA Astrophysics Data System (ADS)

Park, Seung-Min; Aalipour, Amin; Vermesh, Ophir; Yu, Jung Ho; Gambhir, Sanjiv S.

2017-05-01

Nanodiagnostics as a field makes use of fundamental advances in nanobiotechnology to diagnose, characterize and manage disease at the molecular scale. As these strategies move closer to routine clinical use, a proper understanding of different imaging modalities, relevant biological systems and physical properties governing nanoscale interactions is necessary to rationally engineer next-generation bionanomaterials. In this Review, we analyse the background physics of several clinically relevant imaging modalities and their associated sensitivity and specificity, provide an overview of the materials currently used for in vivo nanodiagnostics, and assess the progress made towards clinical translation. This work provides a framework for understanding both the impressive progress made thus far in the nanodiagnostics field as well as presenting challenges that must be overcome to obtain widespread clinical adoption.

Development of a Pulsed Pressure-Based Technique for Cavitation Damage Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Fei; Wang, Jy-An John; Liu, Yun

2012-01-01

Cavitation occurs in many fluid systems and can lead to severe material damage. To assist the study of cavitation damage, a novel testing method utilizing pulsed pressure was developed. In this talk, the scientific background and the technical approach of this development are present and preliminary testing results are discussed. It is expected that this technique can be used to evaluate cavitation damage under various testing conditions including harsh environments such as those relevant to geothermal power generation.

The e-MapScholar project—an example of interoperability in GIScience education

NASA Astrophysics Data System (ADS)

Purves, R. S.; Medyckyj-Scott, D. J.; Mackaness, W. A.

2005-03-01

The proliferation of the use of digital spatial data in learning and teaching provides a set of opportunities and challenges for the development of e-learning materials suitable for use by a broad spectrum of disciplines in Higher Education. Effective e-learning materials must both provide engaging materials with which the learner can interact and be relevant to the learners' disciplinary and background knowledge. Interoperability aims to allow sharing of data and materials through the use of common agreements and specifications. Shared learning materials can take advantage of interoperable components to provide customisable components, and must consider issues in sharing data across institutional borders. The e-MapScholar project delivers teaching materials related to spatial data, which are customisable with respect to both context and location. Issues in the provision of such interoperable materials are discussed, including suitable levels of granularity of materials, the provision of tools to facilitate customisation and mechanisms to deliver multiple data sets and the metadata issues related to such materials. The examples shown make extensive use of the OpenGIS consortium specifications in the delivery of spatial data.

Evaluation of high temperature superconductive thermal bridges for space-borne cryogenic infrared detectors

NASA Technical Reports Server (NTRS)

Scott, Elaine P.

1993-01-01

The focus of this research is on the reduction of the refrigeration requirements for infrared sensors operating in space through the use of high temperature superconductive (HTS) materials as electronic leads between the cooled sensors and the relatively warmer data acquisition components. Specifically, this initial study was directed towards the design of an experiment to quantify the thermal performance of these materials in the space environment. First, an intensive review of relevant literature was undertaken, and then, design requirements were formulated. From this background information, a preliminary experimental design was developed. Additional studies will involve a thermal analysis of the experiment and further modifications of the experimental design.

Cosmogenic activation of materials

NASA Astrophysics Data System (ADS)

Cebrián, Susana

2017-10-01

Experiments looking for rare events like the direct detection of dark matter particles, neutrino interactions or the nuclear double beta decay are operated deep underground to suppress the effect of cosmic rays. But, the production of radioactive isotopes in materials due to previous exposure to cosmic rays is a hazard when ultra-low background conditions are required. In this context, the generation of long-lived products by cosmic nucleons has been studied for many detector media and for other materials commonly used. Here, the main results obtained on the quantification of activation yields on the Earth’s surface will be summarized, considering both measurements and calculations following different approaches. The isotope production cross-sections and the cosmic ray spectrum are the two main ingredients when calculating this cosmogenic activation; the different alternatives for implementing them will be discussed. Activation that can take place deep underground mainly due to cosmic muons will be briefly commented too. Presently, the experimental results for the cosmogenic production of radioisotopes are scarce and discrepancies between different calculations are important in many cases, but the increasing interest on this background source which is becoming more and more relevant can help to change this situation.

Relevant optical properties for direct restorative materials.

PubMed

Pecho, Oscar E; Ghinea, Razvan; do Amaral, Erika A Navarro; Cardona, Juan C; Della Bona, Alvaro; Pérez, María M

2016-05-01

To evaluate relevant optical properties of esthetic direct restorative materials focusing on whitened and translucent shades. Enamel (E), body (B), dentin (D), translucent (T) and whitened (Wh) shades for E (WhE) and B (WhB) from a restorative system (Filtek Supreme XTE, 3M ESPE) were evaluated. Samples (1 mm thick) were prepared. Spectral reflectance (R%) and color coordinates (L*, a*, b*, C* and h°) were measured against black and white backgrounds, using a spectroradiometer, in a viewing booth, with CIE D65 illuminant and d/0° geometry. Scattering (S) and absorption (K) coefficients and transmittance (T%) were calculated using Kubelka-Munk's equations. Translucency (TP) and opalescence (OP) parameters and whiteness index (W*) were obtained from differences of CIELAB color coordinates. R%, S, K and T% curves from all shades were compared using VAF (Variance Accounting For) coefficient with Cauchy-Schwarz inequality. Color coordinates and optical parameters were statistically analyzed using one-way ANOVA, Tukey's test with Bonferroni correction (α=0.0007). Spectral behavior of R% and S were different for T shades. In addition, T shades showed the lowest R%, S and K values, as well as the highest T%, TP an OP values. In most cases, WhB shades showed different color and optical properties (including TP and W*) than their corresponding B shades. WhE shades showed similar mean W* values and higher mean T% and TP values than E shades. When using whitened or translucent composites, the final color is influenced not only by the intraoral background but also by the color and optical properties of multilayers used in the esthetic restoration. Copyright © 2016 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Application of neuro-fuzzy methods to gamma spectroscopy

NASA Astrophysics Data System (ADS)

Grelle, Austin L.

Nuclear non-proliferation activities are an essential part of national security activities both domestic and abroad. The safety of the public in densely populated environments such as urban areas or large events can be compromised if devices using special nuclear materials are present. Therefore, the prompt and accurate detection of these materials is an important topic of research, in which the identification of normal conditions is also of importance. With gamma-ray spectroscopy, these conditions are identified as the radiation background, which though being affected by a multitude of factors is ever present. Therefore, in nuclear non-proliferation activities the accurate identification of background is important. With this in mind, a method has been developed to utilize aggregate background data to predict the background of a location through the use of an Artificial Neural Network (ANN). After being trained on background data, the ANN is presented with nearby relevant gamma-ray spectroscopy data---as identified by a Fuzzy Inference System - to create a predicted background spectra to compare to a measured spectra. If a significant deviation exists between the predicted and measured data, the method alerts the user such that a more thorough investigation can take place. Research herein focused on data from an urban setting in which the number of false positives was observed to be 28 out of a total of 987, representing 2.94% error. The method therefore currently shows a high rate of false positives given the current configuration, however there are promising steps that can be taken to further minimize this error. With this in mind, the method stands as a potentially significant tool in urban nuclear nonproliferation activities.

User-Centered Design and Printed Educational Materials: A Focus Group Study of Primary Care Physician Preferences.

PubMed

Grudniewicz, Agnes; Bhattacharyya, Onil; McKibbon, K Ann; Straus, Sharon E

2016-01-01

It is challenging for primary care physicians (PCPs) to review and apply the growing amount of clinical evidence available. Printed educational materials (PEMs), which synthesize evidence, are often ineffective at improving knowledge, possibly due to poor design and limited uptake. In this study, we collected PCP preferences for the design and content of physician-oriented PEMs and determined key attributes that may increase their usability and uptake. We held 90-minute focus groups with PCPs in Toronto, ON, Canada. Focus groups included discussion about whether and how participants use PEMs, feedback on three examples of PEMs, and a discussion on general format and design preferences in PEMs. We analyzed focus group transcripts using a thematic analysis and summarized results in a list of user preferences. Four focus groups were held with 13 PCPs. We found that participants only read PEMs relevant to their patients and prefer short, concise documents, with links to sources that can provide more detailed information. Simplicity of materials was important, with many participants preferring PEMs without lengthy backgrounds or scientific explanations. Most participants wanted to see key messages highlighted to easily assess the relevance of the materials to their practice. Some participants shared physician-oriented PEMs with patients. This study shows that PCPs may prefer shorter, simpler, and more concise documents that have less scientific detail but provide references to further information sources. It is important to understand end user preferences for the design and content of these materials to enhance their uptake.

Fusion materials high energy-neutron studies. A status report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doran, D.G.; Guinan, M.W.

1980-01-01

The objectives of this paper are (1) to provide background information on the US Magnetic Fusion Reactor Materials Program, (2) to provide a framework for evaluating nuclear data needs associated with high energy neutron irradiations, and (3) to show the current status of relevant high energy neutron studies. Since the last symposium, the greatest strides in cross section development have been taken in those areas providing FMIT design data, e.g., source description, shielding, and activation. In addition, many dosimetry cross sections have been tentatively extrapolated to 40 MeV and integral testing begun. Extensive total helium measurements have been made inmore » a variety of neutron spectra. Additional calculations are needed to assist in determining energy dependent cross sections.« less

Laboratory experiments of relevance to the space station environment

NASA Technical Reports Server (NTRS)

Caledonia, G. E.

1988-01-01

It has been found that the interaction between orbital vehicles and the ambient environment produces a contaminant cloud which can cause deletrious effects to spacecraft materials and equipment, create increased radiative backgrounds that would interfere with observational instrumentation, and enhance surface charging. A brief overview of the phenomena that produce the contaminant cloud is presented along with a review of physical data required to characterize it. Laboratory techniques which can be utilized to provide the required data are described. In particular, several oxygen beam apparati are discussed.

What do people with aphasia want to be able to say? A content analysis of words identified as personally relevant by people with aphasia

PubMed Central

Hughes, Helen; Chater, Tim

2017-01-01

Background Word finding is a common difficulty for people with aphasia. Targeting words that are relevant to the individual could maximise the usefulness and impact of word finding therapy. Aims To provide insights into words that people with aphasia perceive to be personally relevant. Methods and procedures 100 people with aphasia were each asked to identify 100 words that would be particularly important for them to be able to say. Two speech and language therapist researchers conducted a quantitative content analysis of the words selected. The words were coded into a framework of topics and subtopics. The frequency with which different words and topics were selected was then calculated. Outcomes and results 100 participants representing 20 areas of the United Kingdom ranged in age from 23 to 85 years. Word finding difficulties ranged from mild to severe. The sample of 9999 words selected for practice included 3095 different words in 27 topics. The majority of words selected (79.4%) were from the topics ‘food and drink’ (30.6%), ‘nature and gardening’ (10.3%), ‘entertainment’ (9.4%), ‘places’ (7.3%), ‘people’ (6.7%), ‘house’ (6.5%), ‘clothes’ (5.2%) and ‘travel’ (3.5%). The 100 words types chosen with the greatest frequency were identified. These account for 27 percent of the 9999 words chosen by the participants. Discussion Personally relevant vocabulary is unique to each individual and is likely to contain specific or specialist words for which material needs to be individually prepared. However there is some commonality in the words chosen by people with aphasia. This could inform pre-prepared materials for use in word finding therapy from which personally relevant words could be selected for practice. PMID:28346518

Technology development life cycle processes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck, David Franklin

2013-05-01

This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81more » of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.« less

Scanning Transmission X-ray Microscopy: Applications in Atmospheric Aerosol Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moffet, Ryan C.; Tivanski, Alexei V.; Gilles, Mary K.

Scanning transmission x-ray microscopy (STXM) combines x-ray microscopy and near edge x-ray absorption fine structure spectroscopy (NEXAFS). This combination provides spatially resolved bonding and oxidation state information. While there are reviews relevant to STXM/NEXAFS applications in other environmental fields (and magnetic materials) this chapter focuses on atmospheric aerosols. It provides an introduction to this technique in a manner approachable to non-experts. It begins with relevant background information on synchrotron radiation sources and a description of NEXAFS spectroscopy. The bulk of the chapter provides a survey of STXM/NEXAFS aerosol studies and is organized according to the type of aerosol investigated. Themore » purpose is to illustrate the current range and recent growth of scientific investigations employing STXM-NEXAFS to probe atmospheric aerosol morphology, surface coatings, mixing states, and atmospheric processing.« less

Discrimination of Hydrovolcanic Tephras from Volcanic and Non-Volcanic Backgrounds in Hyperspectral Data of Pavant Butte and Tabernacle Hill, Utah: Relevance for Mars

NASA Technical Reports Server (NTRS)

Farrand, W. H.

2003-01-01

Water-magma, or ice-magma, interactions have long been theorized as an important process in the Martian geologic record [1-3]. The ability to unambiguously recognize tephra deposits and volcanic edifices produced by H2O-magma interactions is important for understanding the geologic history of Mars and for understanding the genesis of the major components of the Martian surface layer. Recognizing volcanic edifices produced by H2Omagma interactions on the basis of morphology alone is difficult.can be definitively identified as such. One means of providing supporting evidence for the identification of hydrovolcanic landforms and tephra deposits is through spectroscopy. Tephras produced by hydrovolcanic activity range from fresh basaltic glass (sideromelane) to glasses that have been completely altered to palagonite. A study of the visible through short-wave infrared (Vis-IR) reflectance of tephras composing tuff rings and tuff cones showed that the different stages of this alteration sequence have recognizable reflectance signatures [6,7]. However, the ability to recognize these different types of tephras against volcanic and nonvolcanic background materials has yet to be fully demonstrated. In this research, hyperspectral Vis-IR data over volcanic and hydrovolcanic terrains in the Black Rock Desert of Utah were analyzed in order to determine the separability of the component materials from volcanic and non-volcanic backgrounds.

Adolescent Homicide: Towards Assessment of Risk.

ERIC Educational Resources Information Center

Hardwick, Peter J.; Rowton-Lee, Martyn A.

1996-01-01

Reviews the mental health literature relevant to homicidal children and adolescents. Background and situational factors relevant to risk are described. Background factors include the witnessing of serious violence, both live and on the screen, as well as abuse through neglect and deprivation. Discusses other factors that contribute to homicidal…

Mathematical biology modules based on modern molecular biology and modern discrete mathematics.

PubMed

Robeva, Raina; Davies, Robin; Hodge, Terrell; Enyedi, Alexander

2010-01-01

We describe an ongoing collaborative curriculum materials development project between Sweet Briar College and Western Michigan University, with support from the National Science Foundation. We present a collection of modules under development that can be used in existing mathematics and biology courses, and we address a critical national need to introduce students to mathematical methods beyond the interface of biology with calculus. Based on ongoing research, and designed to use the project-based-learning approach, the modules highlight applications of modern discrete mathematics and algebraic statistics to pressing problems in molecular biology. For the majority of projects, calculus is not a required prerequisite and, due to the modest amount of mathematical background needed for some of the modules, the materials can be used for an early introduction to mathematical modeling. At the same time, most modules are connected with topics in linear and abstract algebra, algebraic geometry, and probability, and they can be used as meaningful applied introductions into the relevant advanced-level mathematics courses. Open-source software is used to facilitate the relevant computations. As a detailed example, we outline a module that focuses on Boolean models of the lac operon network.

Mathematical Biology Modules Based on Modern Molecular Biology and Modern Discrete Mathematics

PubMed Central

Davies, Robin; Hodge, Terrell; Enyedi, Alexander

2010-01-01

We describe an ongoing collaborative curriculum materials development project between Sweet Briar College and Western Michigan University, with support from the National Science Foundation. We present a collection of modules under development that can be used in existing mathematics and biology courses, and we address a critical national need to introduce students to mathematical methods beyond the interface of biology with calculus. Based on ongoing research, and designed to use the project-based-learning approach, the modules highlight applications of modern discrete mathematics and algebraic statistics to pressing problems in molecular biology. For the majority of projects, calculus is not a required prerequisite and, due to the modest amount of mathematical background needed for some of the modules, the materials can be used for an early introduction to mathematical modeling. At the same time, most modules are connected with topics in linear and abstract algebra, algebraic geometry, and probability, and they can be used as meaningful applied introductions into the relevant advanced-level mathematics courses. Open-source software is used to facilitate the relevant computations. As a detailed example, we outline a module that focuses on Boolean models of the lac operon network. PMID:20810955

RELEVANCE OF WHOLE BODY VIBRATION EXERCISE IN SPORT: A SHORT REVIEW WITH SOCCER, DIVER AND COMBAT SPORT

PubMed Central

Morel, Danielle Soares; Dionello, Carla da Fontoura; Moreira-Marconi, Eloá; Brandão-Sobrinho-Neto, Samuel; Paineiras-Domingos, Laisa Liane; Souza, Patrícia Lopes; Sá-Caputo, Danúbia da Cunha; Dias, Glenda; Figueiredo, Claudia; Carmo, Roberto Carlos Resende; Paiva, Patrícia de Castro; Sousa-Gonçalves, Cintia Renata; Kütter, Cristiane Ribeiro; Guedes-Aguiar, Eliane de Oliveira; Cloak, Ross; Bernardo-Filho, Mario

2017-01-01

Background: Whole body vibration exercise (WBVE) has been used as a safe and accessible exercise and important reviews have been published about the use of this exercise to manage diseases and to improve physical conditions of athletes The aim of this paper is to highlight the relevance of WBVE to soccer players, divers and combat athletes. Material and methods: This study was made through a systematic review of publications involving WBVE and the selected sports in two databases (Pubmed and PEDRo). Results: It were identified 10 studies involving WBVE and sports (6 of soccer, 2 of diving and 2 of sport combat) with 156 subjects (80 soccer players, 32 divers and 44 combat athletes), with age from 17 to 44 years old. Conclusion: The use of WBVE has proven to be a safe and useful strategy to improve the physical conditions of players of different sports. These findings may have clinical relevance and should be considered as a strategy to be used to try improve the physical conditions of players. PMID:28740940

Electroencephalogram Signal Classification for Automated Epileptic Seizure Detection Using Genetic Algorithm

PubMed Central

Nanthini, B. Suguna; Santhi, B.

2017-01-01

Background: Epilepsy causes when the repeated seizure occurs in the brain. Electroencephalogram (EEG) test provides valuable information about the brain functions and can be useful to detect brain disorder, especially for epilepsy. In this study, application for an automated seizure detection model has been introduced successfully. Materials and Methods: The EEG signals are decomposed into sub-bands by discrete wavelet transform using db2 (daubechies) wavelet. The eight statistical features, the four gray level co-occurrence matrix and Renyi entropy estimation with four different degrees of order, are extracted from the raw EEG and its sub-bands. Genetic algorithm (GA) is used to select eight relevant features from the 16 dimension features. The model has been trained and tested using support vector machine (SVM) classifier successfully for EEG signals. The performance of the SVM classifier is evaluated for two different databases. Results: The study has been experimented through two different analyses and achieved satisfactory performance for automated seizure detection using relevant features as the input to the SVM classifier. Conclusion: Relevant features using GA give better accuracy performance for seizure detection. PMID:28781480

Astrophysically Relevant Dipole Studies at WiPAL

NASA Astrophysics Data System (ADS)

Endrizzi, Douglass; Forest, Cary; Wallace, John; WiPAL Team

2015-11-01

A novel terrella experiment is being developed to immerse a dipole magnetic field in the large, unmagnetized, and fully ionized background plasma of WiPAL (Wisconsin Plasma Astrophysics Lab). This allows for a series of related experiments motivated by astrophysical processes, including (1) inward transport of plasma into a magnetosphere with focus on development of Kelvin-Helmholtz instabilities from boundary shear flow; (2) helicity injection and simulation of solar eruptive events via electrical breakdown along dipole field lines; (3) interaction of Coronal Mass Ejection-like flows with a target magnetosphere and dependence on background plasma pressure; (4) production of a centrifugally driven wind to study how dipolar magnetic topology changes as closed field lines open. A prototype has been developed and preliminary results will be presented. An overview of the final design and construction progress will be given. This material is based upon work supported by the NSF Graduate Research Fellowship Program.

Single photon energy dispersive x-ray diffraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Higginbotham, Andrew; Patel, Shamim; Ciricosta, Orlando

2014-03-15

With the pressure range accessible to laser driven compression experiments on solid material rising rapidly, new challenges in the diagnosis of samples in harsh laser environments are emerging. When driving to TPa pressures (conditions highly relevant to planetary interiors), traditional x-ray diffraction techniques are plagued by increased sources of background and noise, as well as a potential reduction in signal. In this paper we present a new diffraction diagnostic designed to record x-ray diffraction in low signal-to-noise environments. By utilising single photon counting techniques we demonstrate the ability to record diffraction patterns on nanosecond timescales, and subsequently separate, photon-by-photon, signalmore » from background. In doing this, we mitigate many of the issues surrounding the use of high intensity lasers to drive samples to extremes of pressure, allowing for structural information to be obtained in a regime which is currently largely unexplored.« less

Analysis of Glass-Reinforced Epoxy Material for Radio Frequency Resonator

PubMed Central

Islam, M. T.; Misran, N.; Yatim, Baharudin

2014-01-01

A radio frequency (RF) resonator using glass-reinforced epoxy material for C and X band is proposed in this paper. Microstrip line technology for RF over glass-reinforced epoxy material is analyzed. Coupling mechanism over RF material and parasitic coupling performance is explained utilizing even and odd mode impedance with relevant equivalent circuit. Babinet's principle is deployed to explicate the circular slot ground plane of the proposed resonator. The resonator is designed over four materials from different backgrounds which are glass-reinforced epoxy, polyester, gallium arsenide (GaAs), and rogers RO 4350B. Parametric studies and optimization algorithm are applied over the geometry of the microstrip resonator to achieve dual band response for C and X band. Resonator behaviors for different materials are concluded and compared for the same structure. The final design is fabricated over glass-reinforced epoxy material. The fabricated resonator shows a maximum directivity of 5.65 dBi and 6.62 dBi at 5.84 GHz and 8.16 GHz, respectively. The lowest resonance response is less than −20 dB for C band and −34 dB for X band. The resonator is prototyped using LPKF (S63) drilling machine to study the material behavior. PMID:24977230

Autofluorescence of atmospheric bioaerosols - fluorescent biomolecules and potential interferences

NASA Astrophysics Data System (ADS)

Pöhlker, C.; Huffman, J. A.; Pöschl, U.

2012-01-01

Primary biological aerosol particles (PBAP) are an important subset of air particulate matter with a substantial contribution to the organic aerosol fraction and potentially strong effects on public health and climate. Recent progress has been made in PBAP quantification by utilizing real-time bioaerosol detectors based on the principle that specific organic molecules of biological origin such as proteins, coenzymes, cell wall compounds and pigments exhibit intrinsic fluorescence. The properties of many fluorophores have been well documented, but it is unclear which are most relevant for detection of atmospheric PBAP. The present study provides a systematic synthesis of literature data on potentially relevant biological fluorophores. We analyze and discuss their relative importance for the detection of fluorescent biological aerosol particles (FBAP) by online instrumentation for atmospheric measurements such as the ultraviolet aerodynamic particle sizer (UV-APS) or the wide issue bioaerosol sensor (WIBS). In addition, we provide new laboratory measurement data for selected compounds using bench-top fluorescence spectroscopy. Relevant biological materials were chosen for comparison with existing literature data and to fill in gaps of understanding. The excitation-emission matrices (EEM) exhibit pronounced peaks at excitation wavelengths of ~280 nm and ~360 nm, confirming the suitability of light sources used for online detection of FBAP. They also show, however, that valuable information is missed by instruments that do not record full emission spectra at multiple wavelengths of excitation, and co-occurrence of multiple fluorophores within a detected sample will likely confound detailed molecular analysis. Selected non-biological materials were also analyzed to assess their possible influence on FBAP detection and generally exhibit only low levels of background-corrected fluorescent emission. This study strengthens the hypothesis that ambient supermicron particle fluorescence in wavelength ranges used for most FBAP instruments is likely to be dominated by biological material and that such instrumentation is able to discriminate between FBAP and non-biological material in many situations. More detailed follow-up studies on single particle fluorescence are still required to reduce these uncertainties further, however.

Autofluorescence of atmospheric bioaerosols - fluorescent biomolecules and potential interferences

NASA Astrophysics Data System (ADS)

Pöhlker, C.; Huffman, J. A.; Pöschl, U.

2011-09-01

Primary biological aerosol particles (PBAP) are an important subset of air particulate matter with a substantial contribution to the organic aerosol fraction and potentially strong effects on public health and climate. Recent progress has been made in PBAP quantification by utilizing real-time bioaerosol detectors based on the principle that specific organic molecules of biological origin such as proteins, coenzymes, cell wall compounds and pigments exhibit intrinsic fluorescence. The properties of many fluorophores have been well documented, but it is unclear which are most relevant for detection of atmospheric PBAP. The present study provides a systematic synthesis of literature data on potentially relevant biological fluorophores. We analyze and discuss their relative importance for the detection of fluorescent biological aerosol particles (FBAP) by online instrumentation for atmospheric measurements such as the ultraviolet aerodynamic particle sizer (UV-APS) or the wide issue bioaerosol sensor (WIBS). In addition, we provide new laboratory measurement data for selected compounds using bench-top fluorescence spectroscopy. Relevant biological materials were chosen for comparison with existing literature data and to fill in gaps of understanding. The excitation-emission matrices (EEM) exhibit pronounced peaks at excitation wavelengths of ~280 nm and ~360 nm, confirming the suitability of light sources used for online detection of FBAP. They also show, however, that valuable information is missed by instruments that do not record full emission spectra at multiple wavelengths of excitation, and co-occurrence of multiple fluorophores within a detected sample will likely confound detailed molecular analysis. Selected non-biological materials were also analyzed to assess their possible influence on FBAP detection and generally exhibit only low levels of background-corrected fluorescent emission. This study strengthens the hypothesis that ambient supermicron particle fluorescence in wavelength ranges used for most FBAP instruments is likely to be dominated by biological material and that such instrumentation is able to discriminate between FBAP and non-biological material in many situations. More detailed follow-up studies on single particle fluorescence are still required to reduce these uncertainties further, however.

The Evolution of Interstellar Gas: Massive Stars and the Dispersal of Neutral Material

NASA Technical Reports Server (NTRS)

Federman, Steven R.

2003-01-01

We studied the effects of newly formed O and B stars on their surrounding interstellar material through a combination of observations and theoretical modeling. The observational data came from measurements of absorption seen in the spectra of background, newly formed stars. Particular attention was given to stellar radiation which converts molecular to atomic material. Laboratory data on absorption cross sections relevant to the analysis and interpretation of carbon monoxide formed part of the effort. The grant supported Postdoctoral Fellows, Drs. Min Yan and Yaron Sheffer, and a laboratory technician. Though the students themselves were not supported. one M.S. Thesis and two Ph.D. dissertations from the University of Toledo were based on the research done under the grant. The research accomplished under this grant led directly to other funded programs. An observing proposal to study the chemistry of diffuse molecular clouds in the Large and Small Magellanic Clouds with ESO s Very Large Telescope was another example of a successful outcome of my LTSA program.

Thermal properties for the thermal-hydraulics analyses of the BR2 maximum nominal heat flux.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dionne, B.; Kim, Y. S.; Hofman, G. L.

2011-05-23

This memo describes the assumptions and references used in determining the thermal properties for the various materials used in the BR2 HEU (93% enriched in {sup 235}U) to LEU (19.75% enriched in {sup 235}U) conversion feasibility analysis. More specifically, this memo focuses on the materials contained within the pressure vessel (PV), i.e., the materials that are most relevant to the study of impact of the change of fuel from HEU to LEU. This section is regrouping all of the thermal property tables. Section 2 provides a summary of the thermal properties in form of tables while the following sections presentmore » the justification of these values. Section 3 presents a brief background on the approach used to evaluate the thermal properties of the dispersion fuel meat and specific heat capacity. Sections 4 to 7 discuss the material properties for the following materials: (i) aluminum, (ii) dispersion fuel meat (UAlx-Al and U-7Mo-Al), (iii) beryllium, and (iv) stainless steel. Section 8 discusses the impact of irradiation on material properties. Section 9 summarizes the material properties for typical operating temperatures. Appendix A elaborates on how to calculate dispersed phase's volume fraction. Appendix B shows the evolution of the BR2 maximum heat flux with burnup.« less

Thermal Properties for the Thermal-Hydraulics Analyses of the BR2 Maximum Nominal Heat Flux

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dionne, B.; Bergeron, A.; Licht, J. R.

2015-02-01

This memo describes the assumptions and references used in determining the thermal properties for the various materials used in the BR2 HEU (93% enriched in 235U) to LEU (19.75% enriched in 235U) conversion feasibility analysis. More specifically, this memo focuses on the materials contained within the pressure vessel (PV), i.e., the materials that are most relevant to the study of impact of the change of fuel from HEU to LEU. Section 2 provides a summary of the thermal properties in the form of tables while the following sections and appendices present the justification of these values. Section 3 presents amore » brief background on the approach used to evaluate the thermal properties of the dispersion fuel meat and specific heat capacity. Sections 4 to 7 discuss the material properties for the following materials: i) aluminum, ii) dispersion fuel meat (UAlx-Al and U-7Mo-Al), iii) beryllium, and iv) stainless steel. Section 8 discusses the impact of irradiation on material properties. Section 9 summarizes the material properties for typical operating temperatures. Appendix A elaborates on how to calculate dispersed phase’s volume fraction. Appendix B provides a revised methodology for determining the thermal conductivity as a function of burnup for HEU and LEU.« less

Particle-size dependence on metal(loid) distributions in mine wastes: Implications for water contamination and human exposure

USGS Publications Warehouse

Kim, C.S.; Wilson, K.M.; Rytuba, J.J.

2011-01-01

The mining and processing of metal-bearing ores has resulted in contamination issues where waste materials from abandoned mines remain in piles of untreated and unconsolidated material, posing the potential for waterborne and airborne transport of toxic elements. This study presents a systematic method of particle size separation, mass distribution, and bulk chemical analysis for mine tailings and adjacent background soil samples from the Rand historic mining district, California, in order to assess particle size distribution and related trends in metal(loid) concentration as a function of particle size. Mine tailings produced through stamp milling and leaching processes were found to have both a narrower and finer particle size distribution than background samples, with significant fractions of particles available in a size range (???250 ??m) that could be incidentally ingested. In both tailings and background samples, the majority of trace metal(loid)s display an inverse relationship between concentration and particle size, resulting in higher proportions of As, Cr, Cu, Pb and Zn in finer-sized fractions which are more susceptible to both water- and wind-borne transport as well as ingestion and/or inhalation. Established regulatory screening levels for such elements may, therefore, significantly underestimate potential exposure risk if relying solely on bulk sample concentrations to guide remediation decisions. Correlations in elemental concentration trends (such as between As and Fe) indicate relationships between elements that may be relevant to their chemical speciation. ?? 2011 Elsevier Ltd.

Developing Culturally Relevant Literacy Assessments for Bahamian Children

ERIC Educational Resources Information Center

Sachs, Gertrude Tinker; Jackson, Annmarie P.; Sullivan, Tarika; Wynter-Hoyte, Kamania

2018-01-01

The strong presence of culturally relevant materials in classrooms is seen as an indicator of good teaching but the development and use of these materials is under-investigated. Similarly, the actual construction and use of culturally relevant materials for literacy assessment purposes is under-reported. This paper examines the development and…

Are Alphabetic Language-Derived Models of L2 Reading Relevant to L1 Logographic Background Readers?

ERIC Educational Resources Information Center

Ehrich, John Fitzgerald; Zhang, Lawrence Jun; Mu, Jon Congjun; Ehrich, Lisa Catherine

2013-01-01

In this paper, we argue that second language (L2) reading research, which has been informed by studies involving first language (L1) alphabetic English reading, may be less relevant to L2 readers with non-alphabetic reading backgrounds, such as Chinese readers with an L1 logographic (Chinese character) learning history. We provide both…

TheraCal LC: From Biochemical and Bioactive Properties to Clinical Applications

PubMed Central

Rabi, Tarek

2018-01-01

Background Direct pulp capping is a popular treatment modality among dentists. TheraCal LC is a calcium silicate-based material that is designed as a direct/indirect pulp capping material. The material might be very attractive for clinicians because of its ease of handling. Unlike other calcium silicate-based materials, TheraCal LC is resin-based and does not require any conditioning of the dentine surface. The material can be bonded with different types of adhesives directly after application. There has been considerable research performed on this material since its launching; however, there are no review articles that collates information and data obtained from these studies. This review discusses the various characteristics of the material with the aim of establishing a better understanding for its clinical use. Methods A search was conducted using search engines (PubMed and Cochrane databases) in addition to reference mining of the articles that was used to locate other papers. The process of searching for the relevant studies was performed using the keywords pulp protection, pulp capping, TheraCal, and calcium silicates. Only articles in English published in peer-reviewed journals were included in the review. Conclusion This review underlines the fact that further in vitro and in vivo studies are required before TheraCal LC can be used as a direct pulp capping material. PMID:29785184

Clinical teaching with emotional intelligence: A teaching toolbox

PubMed Central

Omid, Athar; Haghani, Fariba; Adibi, Peyman

2016-01-01

Background: Emotional intelligence (EI) helps humans to perceive their own and others’ emotions. It helps to make better interpersonal communication that consequently leads to an increase in everyday performance and professional career. Teaching, particularly teaching in the clinical environment, is among the professions that need a high level of EI due to its relevance to human interactions. Materials and Methods: We adopted EI competencies with characteristics of a good clinical teacher. As a result, we extracted 12 strategies and then reviewed the literatures relevant to these strategies. Results: In the present article, 12 strategies that a clinical teacher should follow to use EI in her/his teaching were described. Conclusion: To apply EI in clinical settings, a teacher should consider all the factors that can bring about a more positive emotional environment and social interactions. These factors will increase students’ learning, improve patients’ care, and maintain her/his well-being. In addition, he/she will be able to evaluate her/his teaching to improve its effectiveness. PMID:27904573

Integrating Research, Education, Outreach and Communication Through Storytelling: A Case Study in Progress

NASA Astrophysics Data System (ADS)

McCaffrey, M. S.; Ledley, T.; Manduca, C.; Salmon, R.

2006-12-01

In order to provide a meaningful context for non-technical users to be able to decipher and comprehend research data, it is necessary to provide background into the process involved. Storytelling can provide the narrative description that brings data alive by showing the 'Who' (providing human interest, education and training background, and career opportunities information), 'What' (focusing on discipline, field of study, research questions, and significance), 'Where' (geographic location(s), logistics involved in getting there, and elevation or depth), 'When' (time(s) of day, year data collected, and temporal scale data focus on), 'Why' (why is the data important intellectually as well as in the broader, societal context) and especially the 'How' (what tools, technology, mathematics, and statistics are used to collect, archive, and analyze data). The upcoming International Polar Year (IPY), running from March 2007 to March 2009, builds on prior polar research and IPYs, and offers a unique opportunity to showcase the process of data collection and analysis in a compelling human context. Internationally, the IPY Education, Outreach and Communication (EOC) subcommittee is seeking to integrate the EOC continuum and when appropriate repurpose information about specific research projects. For example, descriptions of projects designed initially for media purposes may also serve as the "at a glance" overview of a project that can then link to more detailed narrative descriptions of the projects, augmented with video and audio clips, web-links to related background information and relevant curriculum, and ultimately to the data itself, well scaffolded with relevant supporting materials and tools. In the United States, plans are underway for developing a suite of data stories that provide the narrative background of a project and can be used in museum kiosks and other informal science settings, data sheets, that provide teachers with an overview of the data, and curriculum and training for teachers using the model developed by the Earth Exploration Toolkit.

20 CFR 404.1560 - When we will consider your vocational background.

Code of Federal Regulations, 2010 CFR

2010-04-01

... section. (b) Past relevant work. We will first compare our assessment of your residual functional capacity with the physical and mental demands of your past relevant work. (1) Definition of past relevant work. Past relevant work is work that you have done within the past 15 years, that was substantial gainful...

Acoustical evaluation of preschool classrooms

NASA Astrophysics Data System (ADS)

Yang, Wonyoung; Hodgson, Murray

2003-10-01

An investigation was made of the acoustical environments in the Berwick Preschool, Vancouver, in response to complaints by the teachers. Reverberation times (RT), background noise levels (BNL), and in-class sound levels (Leq) were measured for acoustical evaluation in the classrooms. With respect to the measured RT and BNL, none of the classrooms in the preschool were acceptable according to the criteria relevant to this study. A questionnaire was administered to the teachers to assess their subjective responses to the acoustical and nonacoustical environments of the classrooms. Teachers agreed that the nonacoustical environments in the classrooms were fair, but that the acoustical environments had problems. Eight different classroom configurations were simulated to improve the acoustical environments, using the CATT room acoustical simulation program. When the surface absorption was increased, both the RT and speech levels decreased. RASTI was dependent on the volumes of the classrooms when the background noise levels were high; however, it depended on the total absorption of the classrooms when the background noise levels were low. Ceiling heights are critical as well. It is recommended that decreasing the volume of the classrooms is effective. Sound absorptive materials should be added to the walls or ceiling.

DiMES PMI research at DIII-D in support of ITER and beyond

DOE PAGES

Rudakov, Dimitry L.; Abrams, Tyler; Ding, Rui; ...

2017-03-27

An overview of recent Plasma-Material Interactions (PMI) research at the DIII-D tokamak using the Divertor Material Evaluation System (DiMES) is presented. The DiMES manipulator allows for exposure of material samples in the lower divertor of DIII-D under well-diagnosed ITER-relevant plasma conditions. Plasma parameters during the exposures are characterized by an extensive diagnostic suite including a number of spectroscopic diagnostics, Langmuir probes, IR imaging, and Divertor Thomson Scattering. Post-mortem measurements of net erosion/deposition on the samples are done by Ion Beam Analysis, and results are modelled by the ERO and REDEP/WBC codes with plasma background reproduced by OEDGE/DIVIMP modelling based onmore » experimental inputs. This article highlights experiments studying sputtering erosion, re-deposition and migration of high-Z elements, mostly tungsten and molybdenum, as well as some alternative materials. Results are generally encouraging for use of high-Z PFCs in ITER and beyond, showing high redeposition and reduced net sputter erosion. Two methods of high-Z PFC surface erosion control, with (i) external electrical biasing and (ii) local gas injection, are also discussed. Furthermore, these techniques may find applications in the future devices.« less

Testing odorants recovery from a novel metallized fluorinated ethylene propylene gas sampling bag.

PubMed

Zhu, Wenda; Koziel, Jacek A; Cai, Lingshuang; Wright, Donald; Kuhrt, Fred

2015-12-01

Industry-standard Tedlar bags for odor sample collection from confined animal feeding operations (CAFOs) have been challenged by the evidence of volatile organic compound (VOC) losses and background interferences. Novel impermeable aluminum foil with a thin layer of fluorinated ethylene propylene (FEP) film on the surface that is in contact with a gas sample was developed to address this challenge. In this research, Tedlar and metallized FEP bags were compared for (a) recoveries of four characteristic CAFO odorous VOCs (ethyl mercaptan, butyric acid, isovaleric acid and p-cresol) after 30 min and 24 hr sample storage time and for (b) chemical background interferences. All air sampling and analyses were performed with solid-phase microextraction (SPME) followed by gas chromatography-mass spectroscopy (GC-MS). Mean target gas sample recoveries from metallized FEP bags were 25.9% and 28.0% higher than those in Tedlar bags, for 30 min and 24 hr, respectively. Metallized FEP bags demonstrated the highest p-cresol recoveries after 30-min and 24-hr storage, 96.1±44.5% and 44.8±10.2%, respectively, among different types of sampling bags reported in previous studies. However, a higher variability was observed for p-cresol recovery with metallized FEP bags. A 0% recovery of ethyl mercaptan was observed with Tedlar bags after 24-hr storage, whereas an 85.7±7.4% recovery was achieved with metallized FEP bags. Recoveries of butyric and isovaleric acids were similar for both bag types. Two major impurities in Tedlar bags' background were identified as N,N-dimethylacetamide and phenol, while backgrounds of metallized FEP bags were significantly cleaner. Reusability of metallized FEP bags was tested. Caution is advised when using polymeric materials for storage of livestock-relevant odorous volatile organic compounds. The odorants loss with storage time confirmed that long-term storage in whole-air form is ill advised. A focused short-term odor sample containment should be biased toward the most inert material available relative to the highest impact target odorant. Metallized FEP was identified as such a material to p-cresol as the highest impact odorant from confined animal feeding operations. Metallized FEP bags have much cleaner background than commercial Tedlar bags do. Significantly higher recoveries of methyl mercaptan and p-cresol were also observed with metallized FEP bags.

When Educational Material Is Delivered: A Mixed Methods Content Validation Study of the Information Assessment Method

PubMed Central

2017-01-01

Background The Information Assessment Method (IAM) allows clinicians to report the cognitive impact, clinical relevance, intention to use, and expected patient health benefits associated with clinical information received by email. More than 15,000 Canadian physicians and pharmacists use the IAM in continuing education programs. In addition, information providers can use IAM ratings and feedback comments from clinicians to improve their products. Objective Our general objective was to validate the IAM questionnaire for the delivery of educational material (ecological and logical content validity). Our specific objectives were to measure the relevance and evaluate the representativeness of IAM items for assessing information received by email. Methods A 3-part mixed methods study was conducted (convergent design). In part 1 (quantitative longitudinal study), the relevance of IAM items was measured. Participants were 5596 physician members of the Canadian Medical Association who used the IAM. A total of 234,196 ratings were collected in 2012. The relevance of IAM items with respect to their main construct was calculated using descriptive statistics (relevance ratio R). In part 2 (qualitative descriptive study), the representativeness of IAM items was evaluated. A total of 15 family physicians completed semistructured face-to-face interviews. For each construct, we evaluated the representativeness of IAM items using a deductive-inductive thematic qualitative data analysis. In part 3 (mixing quantitative and qualitative parts), results from quantitative and qualitative analyses were reviewed, juxtaposed in a table, discussed with experts, and integrated. Thus, our final results are derived from the views of users (ecological content validation) and experts (logical content validation). Results Of the 23 IAM items, 21 were validated for content, while 2 were removed. In part 1 (quantitative results), 21 items were deemed relevant, while 2 items were deemed not relevant (R=4.86% [N=234,196] and R=3.04% [n=45,394], respectively). In part 2 (qualitative results), 22 items were deemed representative, while 1 item was not representative. In part 3 (mixing quantitative and qualitative results), the content validity of 21 items was confirmed, and the 2 nonrelevant items were excluded. A fully validated version was generated (IAM-v2014). Conclusions This study produced a content validated IAM questionnaire that is used by clinicians and information providers to assess the clinical information delivered in continuing education programs. PMID:28292738

Amputee socks: how does sock ply relate to sock thickness?

PubMed Central

Sanders, Joan E; Cagle, John C; Harrison, Daniel S; Karchin, Ari

2015-01-01

Background The term “sock ply” may be a source of confusion in prosthetics practice, because there may not be a consistent relationship between sock ply and sock thickness. Objectives The purpose of this study was to characterize how sock ply related to sock thickness for different sock materials commonly used in limb prosthetics. We also evaluated how sock thickness changed under loading conditions experienced while wearing a lower-limb prosthesis compared with unstressed. Study Design Experimental. Mechanical assessment. Methods Seven sock materials of varying ply were tested using a custom instrument. Sock thickness under eight different compressive stress conditions and two different in-plane tensile strain conditions were measured. Results For socks woven from a single material, thickness under walking stance phase conditions averaged 0.7, 1.2, and 1.5 mm for 1, 3, and 5-ply, respectively. For socks woven from several materials, the corresponding results were 0.4, 0.7, and 0.8 mm, respectively. Sock ply did not sum, e.g. a 3-ply sock was not three times the thickness of a 1-ply sock. Conclusions Sock thickness and compressive stiffness are strongly dependent upon sock material and interface pressure. Clinical Relevance Data may be useful towards selecting socks during fitting and towards understanding volume changes induced by adding socks. PMID:22228614

Improved background suppression in ¹H MAS NMR using composite pulses.

PubMed

Odedra, Smita; Wimperis, Stephen

2012-08-01

A well known feature of ¹H MAS NMR spectroscopy, particularly of solids where the concentration of ¹H nuclei is low, is the presence in the spectrum of a significant broad "background" signal arising from ¹H nuclei that are outside the MAS rotor and radiofrequency coil, probably located on the surfaces of the static components of the probehead. A popular method of suppressing this unwanted signal is the "depth pulse" method, consisting of a 90° pulse followed by one or two 180° pulses that are phase cycled according to the "Exorcycle" scheme, which removes signal associated with imperfect 180° pulses. Consequently, only spins in the centre of the radiofrequency coil contribute to the ¹H MAS spectrum, while those experiencing a low B₁ field outside the coil are suppressed. Although very effective at removing background signal from the spectrum, one drawback with this approach is that significant loss of the desired signal from the sample also occurs. Here we investigate the ¹H background suppression problem and, in particular, the use of novel antisymmetric passband composite pulses to replace the simple pulses in a depth pulse experiment. We show that it is possible to improve the intensity of the ¹H signals of interest while still maintaining effective background suppression. We expect that these results will be relevant to ¹H MAS NMR studies of, for example, nominally perdeuterated biological samples or nominally anhydrous inorganic materials. Copyright © 2012 Elsevier Inc. All rights reserved.

Improved background suppression in 1H MAS NMR using composite pulses

NASA Astrophysics Data System (ADS)

Odedra, Smita; Wimperis, Stephen

2012-08-01

A well known feature of 1H MAS NMR spectroscopy, particularly of solids where the concentration of 1H nuclei is low, is the presence in the spectrum of a significant broad "background" signal arising from 1H nuclei that are outside the MAS rotor and radiofrequency coil, probably located on the surfaces of the static components of the probehead. A popular method of suppressing this unwanted signal is the "depth pulse" method, consisting of a 90° pulse followed by one or two 180° pulses that are phase cycled according to the "Exorcycle" scheme, which removes signal associated with imperfect 180° pulses. Consequently, only spins in the centre of the radiofrequency coil contribute to the 1H MAS spectrum, while those experiencing a low B1 field outside the coil are suppressed. Although very effective at removing background signal from the spectrum, one drawback with this approach is that significant loss of the desired signal from the sample also occurs. Here we investigate the 1H background suppression problem and, in particular, the use of novel antisymmetric passband composite pulses to replace the simple pulses in a depth pulse experiment. We show that it is possible to improve the intensity of the 1H signals of interest while still maintaining effective background suppression. We expect that these results will be relevant to 1H MAS NMR studies of, for example, nominally perdeuterated biological samples or nominally anhydrous inorganic materials.

On the Relevance of Bernstein for German-Speaking Switzerland

ERIC Educational Resources Information Center

Bolander, Brook

2009-01-01

This article assesses the relevance of Basil Bernstein for German-speaking Switzerland. It argues that Bernstein is potentially relevant for German-speaking Switzerland in light of contemporary studies which highlight a connection between social background and differential school achievement. After contextualising Bernstein's theoretical outlook…

Tactical decisions for changeable cuttlefish camouflage: visual cues for choosing masquerade are relevant from a greater distance than visual cues used for background matching.

PubMed

Buresch, Kendra C; Ulmer, Kimberly M; Cramer, Corinne; McAnulty, Sarah; Davison, William; Mäthger, Lydia M; Hanlon, Roger T

2015-10-01

Cuttlefish use multiple camouflage tactics to evade their predators. Two common tactics are background matching (resembling the background to hinder detection) and masquerade (resembling an uninteresting or inanimate object to impede detection or recognition). We investigated how the distance and orientation of visual stimuli affected the choice of these two camouflage tactics. In the current experiments, cuttlefish were presented with three visual cues: 2D horizontal floor, 2D vertical wall, and 3D object. Each was placed at several distances: directly beneath (in a circle whose diameter was one body length (BL); at zero BL [(0BL); i.e., directly beside, but not beneath the cuttlefish]; at 1BL; and at 2BL. Cuttlefish continued to respond to 3D visual cues from a greater distance than to a horizontal or vertical stimulus. It appears that background matching is chosen when visual cues are relevant only in the immediate benthic surroundings. However, for masquerade, objects located multiple body lengths away remained relevant for choice of camouflage. © 2015 Marine Biological Laboratory.

A Planetary Defense Gateway for Smart Discovery of relevant Information for Decision Support

NASA Technical Reports Server (NTRS)

Bambacus, Myra; Yang, Chaowei Phil; Leung, Ronald Y.; Barbee, Brent; Nuth, Joseph A.; Seery, Bernard; Jiang, Yongyao; Qin, Han; Li, Yun; Yu, Manzhu;

Libretexts: a flexible online open system for disseminating educational materials relevant to geophysics at all levels

NASA Astrophysics Data System (ADS)

Halpern, J. B.

2017-12-01

Libretexts is an online open system for distributing educational materials with over 5 million page views per month. Covering geophysics, chemistry, physics and more it offers a platform for authors and users including faculty and students to access curated educational materials. Currently there are on line texts covering geology, geobiology, natural hazards and understanding the refusal to accept climate change as well as relevant materials in other sections on aquatic and atmospheric chemistry. In addition to "written" materials Libretexts provides access to simulations and demonstrations that are relevant. Most importantly the Libretext project welcomes new contributors. Faculty can use available materials to construct their own texts or supplementary materials in relatively short order. Since all material is covered by a Creative Commons Copyright, material can be added to as needed for teaching.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ortiz de Montellano, B.

As planned a letter was sent out to 17 teachers who had participated in a Summer 1994 workshop on ``Culturally Relevant Science for Hispanics`` at Michigan State. These teachers were supposed to have spent the intervening time developing lesson plans and curricula. The letter requested a report of any activities undertaken and copies of lesson plans and materials developed by February 1996 with a stipend of $400 for satisfactory reports. It was a disappointment to only get 9 responses and not all of them demonstrating a satisfactory level of activity. Diana Marinez, Dean of Science at Texas A and Mmore » University, Corpus Christi, who is the other developer of this curriculum and the author reviewed the submitted materials and chose those showing the most promise to be invited to participate in the Summer Writing Workshop. Spring of 1996 and particularly in May--June, the author wrote a partial first draft of a companion volume for the teacher`s manual which would provide a rationale for doing culturally relevant science, present the cultural and the scientific background that teachers would need in order to be able to teach. One of the goals of this curriculum is that it should be off-the-shelf ready to teach and that teachers would not have to do extra research to encourage its adoption. The outline of the book is appendix 1. The Writing Workshop was held at Texas A and M University, Corpus Christi from July 14 to July 27, 1996. Participating teachers chose topics that they were interested in developing and wrote first drafts. These were distributed to all participants and critiqued by the workshop directors before being rewritten. Some teachers were more productive than others depending on their science background. In total an impressive number of lesson plans were written. These lesson plans are listed in Appendix 3. Appendix 4 is a sample lesson. Work still needs to be done on both the source book and the teachers` manual.« less

In situ Observations of Magnetosonic Waves Modulated by Background Plasma Density

NASA Astrophysics Data System (ADS)

Yu, X.; Yuan, Z.; Huang, S.; Wang, D.; Funsten, H. O.

2017-12-01

We report in situ observations by the Van Allen Probe mission that magnetosonic (MS) waves are clearly relevant to appear relevant to the background plasma number density. As the satellite moved across dense and tenuous plasma alternatively, MS waves occurred only in lower density region. As the observed protons with 'ring' distributions provide free energy, local linear growth rates are calculated and show that magnetosonic waves can be locally excited in tenuous plasma. With variations of the background plasma density, the temporal variations of local wave growth rates calculated with the observed proton ring distributions, show a remarkable agreement with those of the observed wave amplitude. Therefore, the paper provides a direct proof that background plasma densities can modulate the amplitudes of magnetosonic waves through controlling the wave growth rates.

Examining Hip-Hop as Culturally Relevant Pedagogy

ERIC Educational Resources Information Center

Kim, Jung; Pulido, Isaura

2015-01-01

Culturally relevant pedagogy is a framework that conceptualizes the process of student learning as contingent upon educators' deep understanding of students' cultural backgrounds to co-construct knowledge and develop academic skills. Concurrently, there are a growing number of studies that explore hip-hop as a culturally relevant curriculum for…

Activation of Background Knowledge for Inference Making: Effects on Reading Comprehension

ERIC Educational Resources Information Center

Elbro, Carsten; Buch-Iversen, Ida

2013-01-01

Failure to "activate" relevant, existing background knowledge may be a cause of poor reading comprehension. This failure may cause particular problems with inferences that depend heavily on prior knowledge. Conversely, teaching how to use background knowledge in the context of gap-filling inferences could improve reading comprehension in…

Plasma Processes for Semiconductor Fabrication

NASA Astrophysics Data System (ADS)

Hitchon, W. N. G.

1999-01-01

Plasma processing is a central technique in the fabrication of semiconductor devices. This self-contained book provides an up-to-date description of plasma etching and deposition in semiconductor fabrication. It presents the basic physics and chemistry of these processes, and shows how they can be accurately modeled. The author begins with an overview of plasma reactors and discusses the various models for understanding plasma processes. He then covers plasma chemistry, addressing the effects of different chemicals on the features being etched. Having presented the relevant background material, he then describes in detail the modeling of complex plasma systems, with reference to experimental results. The book closes with a useful glossary of technical terms. No prior knowledge of plasma physics is assumed in the book. It contains many homework exercises and serves as an ideal introduction to plasma processing and technology for graduate students of electrical engineering and materials science. It will also be a useful reference for practicing engineers in the semiconductor industry.

X-Ray Diffraction on NIF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eggert, J H; Wark, J

2012-02-15

The National Ignition Facility (NIF) is currently a 192 beam, 1.6 MJ laser. NIF Ramp-Compression Experiments have already made the relevant exo-planet pressure range from 1 to 50 Mbar accessible. We Proposed to Study Carbon Phases by X-Ray Diffraction on NIF. Just a few years ago, ultra-high pressure phase diagrams for materials were very 'simple'. New experiments and theories point out surprising and decidedly complex behavior at the highest pressures considered. High pressures phases of aluminum are also predicted to be complex. Recent metadynamics survey of carbon proposed a dynamic pathway among multiple phases. We need to develop diagnostics andmore » techniques to explore this new regime of highly compressed matter science. X-Ray Diffraction - Understand the phase diagram/EOS/strength/texture of materials to 10's of Mbar. Strategy and physics goals: (1) Powder diffraction; (2) Begin with diamond; (3) Continue with metals etc.; (4) Explore phase diagrams; (5) Develop liquid diffraction; and (6) Reduce background/improve resolution.« less

49 CFR 845.25 - Examination of witnesses.

Code of Federal Regulations, 2010 CFR

2010-10-01

... witnesses. (b) Materiality, relevancy, and competency of witness testimony, exhibits, or physical evidence... inquiry, opportunity shall be given to show materiality, relevancy, or competency of the testimony or...

Clinical Performance of a New Biomimetic Double Network Material

PubMed Central

Dirxen, Christine; Blunck, Uwe; Preissner, Saskia

2013-01-01

Background: The development of ceramics during the last years was overwhelming. However, the focus was laid on the hardness and the strength of the restorative materials, resulting in high antagonistic tooth wear. This is critical for patients with bruxism. Objectives: The purpose of this study was to evaluate the clinical performance of the new double hybrid material for non-invasive treatment approaches. Material and Methods: The new approach of the material tested, was to modify ceramics to create a biomimetic material that has similar physical properties like dentin and enamel and is still as strong as conventional ceramics. Results: The produced crowns had a thickness ranging from 0.5 to 1.5 mm. To evaluate the clinical performance and durability of the crowns, the patient was examined half a year later. The crowns were still intact and soft tissues appeared healthy and this was achieved without any loss of tooth structure. Conclusions: The material can be milled to thin layers, but is still strong enough to prevent cracks which are stopped by the interpenetrating polymer within the network. Depending on the clinical situation, minimally- up to non-invasive restorations can be milled. Clinical Relevance: Dentistry aims in preservation of tooth structure. Patients suffering from loss of tooth structure (dental erosion, Amelogenesis imperfecta) or even young patients could benefit from minimally-invasive crowns. Due to a Vickers hardness between dentin and enamel, antagonistic tooth wear is very low. This might be interesting for treating patients with bruxism. PMID:24167534

12 CFR 1102.30 - Rules of evidence.

Code of Federal Regulations, 2010 CFR

2010-01-01

... in this section, relevant, material and reliable evidence that is not unduly repetitive is admissible... relevant, material, reliable and not unduly repetitive. (b) Stipulations. Any party may stipulate in...

12 CFR 1102.30 - Rules of evidence.

Code of Federal Regulations, 2011 CFR

2011-01-01

... in this section, relevant, material and reliable evidence that is not unduly repetitive is admissible... relevant, material, reliable and not unduly repetitive. (b) Stipulations. Any party may stipulate in...

20 CFR 416.960 - When we will consider your vocational background.

Code of Federal Regulations, 2012 CFR

2012-04-01

... applying for supplemental security income benefits based on disability, and we cannot decide whether you... in paragraphs (b) and (c) of this section. (b) Past relevant work. We will first compare our... work. (1) Definition of past relevant work. Past relevant work is work that you have done within the...

20 CFR 404.1560 - When we will consider your vocational background.

Code of Federal Regulations, 2012 CFR

2012-04-01

... benefits based on disability which began before age 22, or widow's or widower's benefits based on... section. (b) Past relevant work. We will first compare our assessment of your residual functional capacity with the physical and mental demands of your past relevant work. (1) Definition of past relevant work...

A robust hypothesis test for the sensitive detection of constant speed radiation moving sources

NASA Astrophysics Data System (ADS)

Dumazert, Jonathan; Coulon, Romain; Kondrasovs, Vladimir; Boudergui, Karim; Moline, Yoann; Sannié, Guillaume; Gameiro, Jordan; Normand, Stéphane; Méchin, Laurence

2015-09-01

Radiation Portal Monitors are deployed in linear networks to detect radiological material in motion. As a complement to single and multichannel detection algorithms, inefficient under too low signal-to-noise ratios, temporal correlation algorithms have been introduced. Test hypothesis methods based on empirically estimated mean and variance of the signals delivered by the different channels have shown significant gain in terms of a tradeoff between detection sensitivity and false alarm probability. This paper discloses the concept of a new hypothesis test for temporal correlation detection methods, taking advantage of the Poisson nature of the registered counting signals, and establishes a benchmark between this test and its empirical counterpart. The simulation study validates that in the four relevant configurations of a pedestrian source carrier under respectively high and low count rate radioactive backgrounds, and a vehicle source carrier under the same respectively high and low count rate radioactive backgrounds, the newly introduced hypothesis test ensures a significantly improved compromise between sensitivity and false alarm. It also guarantees that the optimal coverage factor for this compromise remains stable regardless of signal-to-noise ratio variations between 2 and 0.8, therefore allowing the final user to parametrize the test with the sole prior knowledge of background amplitude.

Inelastic neutron scattering cross sections for Ge 76 relevant to background in neutrinoless double- β decay experiments

DOE PAGES

Crider, B. P.; Peters, E. E.; Allmond, J. M.; ...

2015-09-11

The experimental signature in searches for the neutrinoless double- decay of 76Ge is a peak near 2039 keV in the spectrum. Given the low probability of the process, it is important that the background in this region be well understood. Moreover, inelastic scattering reactions with neutrons from muon-induced interactions and ( ,n) reactions in the surrounding materials or in the detector can provide contributions to the background. We also measured the production cross sections for rays from the 76Ge(n,n ) reaction in the 2039-keV region at incident neutron energies up to 4.9 MeV. In addition to determining that the crossmore » sections of a previously known 2040.7-keV ray from the 3952-keV level in 76 Ge are rather small, we find that a larger contribution arises from a 2037.5-keV ray which is attributed to a newly identified level at 3147 keV in 76Ge. Finally, a third contribution is also possible from another new level at 3577 keV. These results indicate that the 2039-keV region in 76Ge neutrinoless double- decay searches is more complex than was previously thought.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Archer, Daniel E.; Hornback, Donald Eric; Johnson, Jeffrey O.

This report summarizes the findings of a two year effort to systematically assess neutron and gamma backgrounds relevant to operational modeling and detection technology implementation. The first year effort focused on reviewing the origins of background sources and their impact on measured rates in operational scenarios of interest. The second year has focused on the assessment of detector and algorithm performance as they pertain to operational requirements against the various background sources and background levels.

New in-situ neutron diffraction cell for electrode materials

NASA Astrophysics Data System (ADS)

Biendicho, Jordi Jacas; Roberts, Matthew; Offer, Colin; Noréus, Dag; Widenkvist, Erika; Smith, Ronald I.; Svensson, Gunnar; Edström, Kristina; Norberg, Stefan T.; Eriksson, Sten G.; Hull, Stephen

2014-02-01

A novel neutron diffraction cell has been constructed to allow in-situ studies of the structural changes in materials of relevance to battery applications during charge/discharge cycling. The new design is based on the coin cell geometry, but has larger dimensions compared to typical commercial batteries in order to maximize the amount of electrode material and thus, collect diffraction data of good statistical quality within the shortest possible time. An important aspect of the design is its modular nature, allowing flexibility in both the materials studied and the battery configuration. This paper reports electrochemical tests using a Nickel-metal-hydride battery (Ni-MH), which show that the cell is able to deliver 90% of its theoretical capacity when using deuterated components. Neutron diffraction studies performed on the Polaris diffractometer using nickel metal and a hydrogen-absorbing alloy (MH) clearly show observable changes in the neutron diffraction patterns as a function of the discharge state. Due to the high quality of the diffraction patterns collected in-situ (i.e. good peak-to-background ratio), phase analysis and peak indexing can be performed successfully using data collected in around 30 min. In addition to this, structural parameters for the β-phase (charged) MH electrode obtained by Rietveld refinement are presented.

Assessing Unmet Information Needs of Breast Cancer Survivors: Exploratory Study of Online Health Forums Using Text Classification and Retrieval

PubMed Central

Rastegar-Mojarad, Majid; Wang, Yanshan; Ruddy, Kathryn J; Haddad, Tufia C; Liu, Hongfang

2018-01-01

Background Patient education materials given to breast cancer survivors may not be a good fit for their information needs. Needs may change over time, be forgotten, or be misreported, for a variety of reasons. An automated content analysis of survivors' postings to online health forums can identify expressed information needs over a span of time and be repeated regularly at low cost. Identifying these unmet needs can guide improvements to existing education materials and the creation of new resources. Objective The primary goals of this project are to assess the unmet information needs of breast cancer survivors from their own perspectives and to identify gaps between information needs and current education materials. Methods This approach employs computational methods for content modeling and supervised text classification to data from online health forums to identify explicit and implicit requests for health-related information. Potential gaps between needs and education materials are identified using techniques from information retrieval. Results We provide a new taxonomy for the classification of sentences in online health forum data. 260 postings from two online health forums were selected, yielding 4179 sentences for coding. After annotation of data and training alternative one-versus-others classifiers, a random forest-based approach achieved F1 scores from 66% (Other, dataset2) to 90% (Medical, dataset1) on the primary information types. 136 expressions of need were used to generate queries to indexed education materials. Upon examination of the best two pages retrieved for each query, 12% (17/136) of queries were found to have relevant content by all coders, and 33% (45/136) were judged to have relevant content by at least one. Conclusions Text from online health forums can be analyzed effectively using automated methods. Our analysis confirms that breast cancer survivors have many information needs that are not covered by the written documents they typically receive, as our results suggest that at most a third of breast cancer survivors’ questions would be addressed by the materials currently provided to them. PMID:29764801

Neural basis of processing threatening voices in a crowded auditory world

PubMed Central

Mothes-Lasch, Martin; Becker, Michael P. I.; Miltner, Wolfgang H. R.

2016-01-01

In real world situations, we typically listen to voice prosody against a background crowded with auditory stimuli. Voices and background can both contain behaviorally relevant features and both can be selectively in the focus of attention. Adequate responses to threat-related voices under such conditions require that the brain unmixes reciprocally masked features depending on variable cognitive resources. It is unknown which brain systems instantiate the extraction of behaviorally relevant prosodic features under varying combinations of prosody valence, auditory background complexity and attentional focus. Here, we used event-related functional magnetic resonance imaging to investigate the effects of high background sound complexity and attentional focus on brain activation to angry and neutral prosody in humans. Results show that prosody effects in mid superior temporal cortex were gated by background complexity but not attention, while prosody effects in the amygdala and anterior superior temporal cortex were gated by attention but not background complexity, suggesting distinct emotional prosody processing limitations in different regions. Crucially, if attention was focused on the highly complex background, the differential processing of emotional prosody was prevented in all brain regions, suggesting that in a distracting, complex auditory world even threatening voices may go unnoticed. PMID:26884543

10 CFR 73.28 - Security background checks for secure transfer of nuclear materials.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Security background checks for secure transfer of nuclear materials. 73.28 Section 73.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Physical Protection of Special Nuclear Material in Transit § 73.28 Security...

10 CFR 73.28 - Security background checks for secure transfer of nuclear materials.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Security background checks for secure transfer of nuclear materials. 73.28 Section 73.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Physical Protection of Special Nuclear Material in Transit § 73.28 Security...

10 CFR 73.28 - Security background checks for secure transfer of nuclear materials.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Security background checks for secure transfer of nuclear materials. 73.28 Section 73.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Physical Protection of Special Nuclear Material in Transit § 73.28 Security...

10 CFR 73.28 - Security background checks for secure transfer of nuclear materials.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Security background checks for secure transfer of nuclear materials. 73.28 Section 73.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Physical Protection of Special Nuclear Material in Transit § 73.28 Security...

10 CFR 73.28 - Security background checks for secure transfer of nuclear materials.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Security background checks for secure transfer of nuclear materials. 73.28 Section 73.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Physical Protection of Special Nuclear Material in Transit § 73.28 Security...

Specific Consideration on Superior Performance and Evaluation Methods of Polymer-housed Surge Arresters

NASA Astrophysics Data System (ADS)

Ishizaki, Yoshihiro; Kobayashi, Misao; Suzuki, Hironori; Futagami, Koichi

It is very suitable to select the polymer materials for the housings of surge arresters (SAs), because the polymer materials are generally soft and light weight. Therefore, many kinds of polymer-housed SAs using various polymer materials have been developed, and expanding into many countries. Considering these backgrounds, the JEC technical report (JEC-TR) 23002-2008; polymer-housed surge arrester(1) has been established based on the existent relevant standards of arresters, such as JEC-2371-2003; Insulator-housed surge arresters(2) and IEC 60099-4 Edition 2.2, Metal-oxide surge arresters (MOSAs) without gaps for a.c. systems(3) in order to introduce the technology and provide a common guide for testing of polymer-housed SAs. According as the JEC-TR, the various new applications of the polymer-housed SAs, which are caused by superior advantages such as compact, light weight, safe failure mode, anti-seismic performance, anti-pollution performance and cost efficiency design, have been realized recently in Japan. Therefore, this paper gives specific consideration on the superior performance of the polymer-housed SAs and the evaluation methods of the polymer-housed SAs, because there are some issues in the existent standards to be solved.

Analysis of human factors effects on the safety of transporting radioactive waste materials: Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abkowitz, M.D.; Abkowitz, S.B.; Lepofsky, M.

1989-04-01

This report examines the extent of human factors effects on the safety of transporting radioactive waste materials. It is seen principally as a scoping effort, to establish whether there is a need for DOE to undertake a more formal approach to studying human factors in radioactive waste transport, and if so, logical directions for that program to follow. Human factors effects are evaluated on driving and loading/transfer operations only. Particular emphasis is placed on the driving function, examining the relationship between human error and safety as it relates to the impairment of driver performance. Although multi-modal in focus, the widespreadmore » availability of data and previous literature on truck operations resulted in a primary study focus on the trucking mode from the standpoint of policy development. In addition to the analysis of human factors accident statistics, the report provides relevant background material on several policies that have been instituted or are under consideration, directed at improving human reliability in the transport sector. On the basis of reported findings, preliminary policy areas are identified. 71 refs., 26 figs., 5 tabs.« less

Introducing curriculum innovations in science: Identifying teachers' transformations and the design of related teacher education

NASA Astrophysics Data System (ADS)

Pint, Roser

2005-01-01

This paper introduces the four research papers in this paper set, which all derive from a European research project, STTIS (Science Teacher Training in an Information Society). The central concern of the project was to study curriculum innovations in science, and to investigate ways in which teachers transform these innovations when putting them into practice. This work led to the construction of appropriate teacher training materials for use when an innovation is being introduced. The paper describes the mutual research strategy agreed upon by the STTIS partners. Both to avoid repetition and to underline the understanding that the partners share about the issues involved in curriculum innovation and related teacher education, the main theoretical background and the review of literature relevant to all four papers is to be found here. Themes and conclusions common to all the papers are highlighted. The paper also outlines the common features of the approach the STTIS partners took toward the construction of teacher training materials. These materials build in concrete results from the research, in forms that provoke discussion and reflection aimed at making teachers more aware of their ideas and behavior, with a view to effecting lasting change.

Design, fabrication, and implementation of voxel-based 3D printed textured phantoms for task-based image quality assessment in CT

NASA Astrophysics Data System (ADS)

Solomon, Justin; Ba, Alexandre; Diao, Andrew; Lo, Joseph; Bier, Elianna; Bochud, François; Gehm, Michael; Samei, Ehsan

2016-03-01

In x-ray computed tomography (CT), task-based image quality studies are typically performed using uniform background phantoms with low-contrast signals. Such studies may have limited clinical relevancy for modern non-linear CT systems due to possible influence of background texture on image quality. The purpose of this study was to design and implement anatomically informed textured phantoms for task-based assessment of low-contrast detection. Liver volumes were segmented from 23 abdominal CT cases. The volumes were characterized in terms of texture features from gray-level co-occurrence and run-length matrices. Using a 3D clustered lumpy background (CLB) model, a fitting technique based on a genetic optimization algorithm was used to find the CLB parameters that were most reflective of the liver textures, accounting for CT system factors of spatial blurring and noise. With the modeled background texture as a guide, a cylinder phantom (165 mm in diameter and 30 mm height) was designed, containing 20 low-contrast spherical signals (6 mm in diameter at targeted contrast levels of ~3.2, 5.2, 7.2, 10, and 14 HU, 4 repeats per signal). The phantom was voxelized and input into a commercial multi-material 3D printer (Object Connex 350), with custom software for voxel-based printing. Using principles of digital half-toning and dithering, the 3D printer was programmed to distribute two base materials (VeroWhite and TangoPlus, nominal voxel size of 42x84x30 microns) to achieve the targeted spatial distribution of x-ray attenuation properties. The phantom was used for task-based image quality assessment of a clinically available iterative reconstruction algorithm (Sinogram Affirmed Iterative Reconstruction, SAFIRE) using a channelized Hotelling observer paradigm. Images of the textured phantom and a corresponding uniform phantom were acquired at six dose levels and observer model performance was estimated for each condition (5 contrasts x 6 doses x 2 reconstructions x 2 backgrounds = 120 total conditions). Based on the observer model results, the dose reduction potential of SAFIRE was computed and compared between the uniform and textured phantom. The dose reduction potential of SAFIRE was found to be 23% based on the uniform phantom and 17% based on the textured phantom. This discrepancy demonstrates the need to consider background texture when assessing non-linear reconstruction algorithms.

Dynamic toughness in elastic nonlinear viscous solids

NASA Astrophysics Data System (ADS)

Tang, S.; Guo, T. F.; Cheng, L.

2009-02-01

This work addresses the interrelationship among dissipative mechanisms—material separation in the fracture process zone (FPZ), nonelastic deformation in the surrounding background material and kinetic energy—and how they affect the macroscopic dynamic fracture toughness as well as the limiting crack speed in strain rate sensitive materials. To this end, a micromechanics-based model for void growth in a nonlinear viscous solid is incorporated into a microporous strip of cell elements that forms the FPZ. The latter is surrounded by background material described by conventional constitutive relations. In the first part of the paper, the background material is assumed to be purely elastic. Here, the computed dynamic fracture toughness is a convex function of crack velocity. In the second part, the background material as well as the FPZ are described by similar rate-sensitivity parameters. Voids grow in the strain rate strengthened FPZ as the crack velocity increases. Consequently, the work of separation increases. By contrast, the inelastic dissipation in the background material appears to be a concave function of crack velocity. At the lower crack velocity regime, where dissipation in the background material is dominant, toughness decreases as crack velocity increases. At high crack velocities, inelastic deformation enhanced by the inertial force can cause a sharp increase in toughness. Here, the computed toughness increases rapidly with crack velocity. There exist regimes where the toughness is a non-monotonic function of the crack velocity. Two length scales—the width of the FPZ and the ratio of the shear wave speed to the reference strain rate—can be shown to strongly affect the dynamic fracture toughness. Our computational simulations can predict experimental data for fracture toughness vs. crack velocity reported in several studies for amorphous polymeric materials.

39 CFR 952.21 - Depositions, interrogatories, requests for admission of fact and production of documents.

Code of Federal Regulations, 2010 CFR

2010-07-01

... verbatim. Objections to relevancy or materiality of testimony, or to errors and irregularities occurring at... therefor and specifically identify the documents or objects and their relevance and materiality to the...

Enhancing Information Awareness Through Directed Qualification of Semantic Relevancy Scoring Operations

DTIC Science & Technology

2014-06-01

analytics to evaluate document relevancy and order query results. 4 Background • Information environment complexity • Relevancy solutions for big data ...027 Primary Topic: Data , Information and Knowledge Alternatives: Organizational Concepts and Approaches; Experimentation, Metrics, and Analysis...instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send

They Schools: Culturally Relevant Pedagogy under Siege

ERIC Educational Resources Information Center

Royal, Camika; Gibson, Simone

2017-01-01

Background/Context: Culturally relevant pedagogy (CRP ) represents educators who work toward academic excellence, cultural competence, and sociopolitical awareness (Ladson-Billings, 2014). Although some profess to embrace CRP , many educators neglect sociopolitical consciousness (T. Howard, 2003; Simmons et al., 2013; Young, 2010).…

Cooperative oscillations of electron-copper-oxygen interaction: Possible relevance for superconduction theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tributsch, H.

1989-01-01

Interfaces of copper containing crystallized materials (Cu/sub 5/FeS/sub 4/, CuFeS/sub 2/, Cu/sub 2/S, CuS, CuInS/sub 2/, and CuInSe/sub 2/), exposed to oxidation by H/sub 2/O/sub 2/, undergo sustained electrochemical oscillations. They involve electronic (Cu/sup +/), (Cu/sup 2 +/), and (Cu/sup 3 +/) interactions with chemically bound oxygen similar as in superconducting YBa/sub 2/Cu/sub 3/O/sub 7/ or (La,Sr)/sub 2/CuO/sub 4/ and may be a phenomenon of irreversible thermodynamics which is related to the kind of cooperative electron-copper-oxygen interactions which also give rise to high-temperature superconduction. The relevance of the model system is supported by the formation of the H/sub 2/O/sub 2/more » species on the surface of high-temperature superconducting materials in contact with ambiental humidity. It is shown how, by a simple modification of the interaction mechanism, an oscillatory phenomenon such as that observed with oxidized copper sulfide interfaces, which follows a limiting cycle, can be converted into a triple-state phenomenon. Such a cooperative mechanism that involves a lowest steady state which is unable to turn over energy may be the background for the pairing of electrons or a related cooperative interaction process in superconduction. As a possible support, no interfacial oscillations could yet be induced with Ba/sub 2/Cu/sub 3/Y/sub 7/.« less

Controlling conflict from interfering long-term memory representations.

PubMed

Jost, Kerstin; Khader, Patrick H; Düsel, Peter; Richter, Franziska R; Rohde, Kristina B; Bien, Siegfried; Rösler, Frank

2012-05-01

Remembering is more than an activation of a memory trace. As retrieval cues are often not uniquely related to one specific memory, cognitive control should come into play to guide selective memory retrieval by focusing on relevant while ignoring irrelevant information. Here, we investigated, by means of EEG and fMRI, how the memory system deals with retrieval interference arising when retrieval cues are associated with two material types (faces and spatial positions), but only one is task-relevant. The topography of slow EEG potentials and the fMRI BOLD signal in posterior storage areas indicated that in such situations not only the relevant but also the irrelevant material becomes activated. This results in retrieval interference that triggers control processes mediated by the medial and lateral PFC, which are presumably involved in biasing target representations by boosting the task-relevant material. Moreover, memory-based conflict was found to be dissociable from response conflict that arises when the relevant and irrelevant materials imply different responses. The two types of conflict show different activations in the medial frontal cortex, supporting the claim of domain-specific prefrontal control systems.

Aging experiences of older immigrant women in Québec (Canada): From deskilling to liberation.

PubMed

Charpentier, Michèle; Quéniart, Anne

2017-01-01

This article examines experiences of aging of older immigrant women. The data are based on qualitative research that was conducted in Québec, Canada with 83 elderly women from different ethnocultural backgrounds (Arab, African, Haitian, Japanese, Chinese, Portuguese, Romanian, etc.). The results on how such immigrant women deal with material conditions of existence such as deskilling, aging alone, being more economically independent, and the combined effects of liberation from social and family norms associated with age and gender in the light of the migration route, will be presented. For the majority, migration opened up possibilities for personal development and self-affirmation. The findings demonstrated the relevance of the intersectional approach in understanding the complexity and social conditionings of women's experiences of aging.

Dacron® vs. PTFE as bypass materials in peripheral vascular surgery – systematic review and meta-analysis

PubMed Central

Roll, Stephanie; Müller-Nordhorn, Jacqueline; Keil, Thomas; Scholz, Hans; Eidt, Daniela; Greiner, Wolfgang; Willich, Stefan N

2008-01-01

Background In peripheral vascular bypass surgery different synthetic materials are available for bypass grafting. It is unclear which of the two commonly used materials, polytetrafluoroethylene (PTFE) or polyester (Dacron®) grafts, is to be preferred. Thus, the aim of this meta-analysis and systematic review was to compare the effectiveness of these two prosthetic bypass materials (Dacron® and PTFE). Methods We performed a systematic literature search in MEDLINE, Cochrane-Library – CENTRAL, EMBASE and other databases for relevant publications in English and German published between 1999 and 2008. Only randomized controlled trials were considered for inclusion. We assessed the methodological quality by means of standardized checklists. Primary patency was used as the main endpoint. Random-effect meta-analysis as well as pooling data in life table format was performed to combine study results. Results Nine randomized controlled trials (RCT) were included. Two trials showed statistically significant differences in primary patency, one favouring Dacron® and one favouring PTFE grafts, while 7 trials did not show statistically significant differences between the two materials. Meta-analysis on the comparison of PTFE vs. Dacron® grafts yielded no differences with regard to primary patency rates (hazard ratio 1.04 (95% confidence interval [0.85;1.28]), no significant heterogeneity (p = 0.32, I2 = 14%)). Similarly, there were no significant differences with regard to secondary patency rates. Conclusion Systematic evaluation and meta-analysis of randomized controlled trials comparing Dacron® and PTFE as bypass materials for peripheral vascular surgery showed no evidence of an advantage of one synthetic material over the other. PMID:19099583

Readability of Online Materials for Rhinoplasty

PubMed Central

Santos, Pauline Joy F; Daar, David A; Paydar, Keyianoosh Z; Wirth, Garrett A

2018-01-01

BACKGROUND Rhinoplasty is a popular aesthetic and reconstructive surgical procedure. However, little is known about the content and readability of online materials for patient education. The recommended grade level for educational materials is 7th to 8th grade according to the National Institutes of Health (NIH). This study aims to assess the readability of online patient resources for rhinoplasty. METHODS The largest public search engine, Google, was queried using the term “rhinoplasty” on February 26, 2016. Location filters were disabled and sponsored results excluded to avoid any inadvertent search bias. The 10 most popular websites were identified and all relevant, patient-directed information within one click from the original site was downloaded and saved as plain text. Readability was analyzed using five established analyses (Readability-score.com, Added Bytes, Ltd., Sussex, UK). RESULTS Analysis of ten websites demonstrates an average grade level of at least 12th grade. No material was at the recommended 7th to 8th grade reading level (Flesch-Kincaid, 11.1; Gunning-Fog, 14.1; Coleman-Liau, 14.5; SMOG 10.4; Automated Readability, 10.7; Average Grade Level, 12.2). Overall Flesch-Kincaid Reading Ease Index was 43.5, which is rated as “difficult.” CONCLUSION Online materials available for rhinoplasty exceed NIH-recommended reading levels, which may prevent appropriate decision-making in patients considering these types of surgery. Outcomes of this study identify that Plastic Surgeons should be cognizant of available online patient materials and make efforts to develop and provide more appropriate materials. Readability results can also contribute to marketing strategy and attracting a more widespread interest in the procedure. PMID:29651397

Investigation of contact allergy to dental materials by patch testing

PubMed Central

Rai, Reena; Dinakar, Devina; Kurian, Swetha S.; Bindoo, Y. A.

2014-01-01

Background: Dental products are widely used by patients and dental personnel alike and may cause problems for both. Dental materials could cause contact allergy with varying manifestations such as burning, pain, stomatitis, cheilitis, ulcers, lichenoid reactions localized to the oral mucosa in patients, and hand dermatitis in dental personnel. Patch testing with the dental series comprising commonly used materials can be used to detect contact allergies to dental materials. Aim: This study aimed to identify contact allergy among patients who have oral mucosal lesions after dental treatment and among dental personnel who came in contact with these materials. Materials and Methods: Twenty patients who had undergone dental procedures with symptoms of oral lichen planus, oral stomatitis, burning mouth, and recurrent aphthosis, were included in the study. Dental personnel with history of hand dermatitis were also included in the study. Patch testing was performed using Chemotechnique Dental Series and results interpreted as recommended by the International Contact Dermatitis Research Group (ICDRG). Results: Out of 13 patients who had undergone dental treatment/with oral symptoms, six patients with stomatitis, lichenoid lesions, and oral ulcers showed positive patch tests to a variety of dental materials, seven patients with ulcers had negative patch tests, seven dental personnel with hand dermatitis showed multiple allergies to various dental materials, and most had multiple positivities. Conclusion: The patch test is a useful, simple, noninvasive method to detect contact allergies among patients and among dental personnel dealing with these products. Long term studies are necessary to establish the relevance of these positive patch tests by eliminating the allergic substances, identifying clinical improvement, and substituting with nonallergenic materials. PMID:25165644

Using Action Research and Peer Perspectives to Develop Technology That Facilitates Behavioral Change and Self-Management in COPD

PubMed Central

McCabe, Catherine; Dinsmore, John; Brady, Anne Marie; Mckee, Gabrielle; O'Donnell, Sharon; Prendergast, David

2014-01-01

Background. Behavioural change and self-management in patients with chronic illness may help to control symptoms, avoid rehospitalization, enhance quality of life, and decrease mortality and morbidity. Objective. Guided by action research principles and using mixed methods, the aim of this project was to develop peer based educational, motivational, and health-promoting peer based videos, using behavioural change principles, to support self-management in patients with COPD. Methods. Individuals (n = 32) living with COPD at home and involved in two community based COPD support groups were invited to participate in this project. Focus group/individual interviews and a demographic questionnaire were used to collect data. Results. Analysis revealed 6 categories relevant to behavioural change which included self-management, support, symptoms, knowledge, rehabilitation, and technology. Participants commented that content needed to be specific, and videos needed to be shorter, to be tailored to severity of condition, to demonstrate “normal” activities, to be positive, and to ensure that content is culturally relevant. Conclusions. This study demonstrated that detailed analysis of patient perspectives and needs for self-management is essential and should underpin the development of any framework, materials, and technology. The action research design principles provided an effective framework for eliciting the data and applying it to technology and testing its relevance to the user. PMID:24959177

Knowledge, Attitude, Practice, and Status of Infection Control among Iranian Dentists and Dental Students: A Systematic Review

PubMed Central

Moradi Khanghahi, Behnam; Jamali, Zahra; Pournaghi Azar, Fatemeh; Naghavi Behzad, Mohammad; Azami-Aghdash, Saber

2013-01-01

Background and aims Infection control is an important issue in dentistry, and the dentists are primarily responsible for observing the relevant procedures. Therefore, the present study evaluated knowledge, attitude, practice, and status of infection control among Iranian dentists through systematic review of published results. Materials and methods In this systematic review, the required data was collected searching for keywords including infection, infection control, behavior, performance, practice, attitude, knowledge, dent*, prevention, Iran* and their Persian equivalents in PubMed, Science Direct, Iranmedex, SID, Medlib, and Magiran databases with a time limit of 1985 to 2012. Out of 698 articles, 15 completely related articles were finally considered and the rest were excluded due to lake of relev-ance to the study goals. The required data were extracted and summarized in an Extraction Table and were analyzed ma-nually. Results Evaluating the results of studies indicated inappropriate knowledge, attitude, and practice regarding infection control among Iranian dentists and dental students. Using personal protection devices and observing measures required for infection control were not in accordance with global standards. Conclusion The knowledge, attitudes, and practice of infection control in Iranian dental settings were found to be inadequate. Therefore, dentists should be educated more on the subject and special programs should be in place to monitor the dental settings for observing infection control standards. PMID:23875081

Review of Monte Carlo simulations for backgrounds from radioactivity

NASA Astrophysics Data System (ADS)

Selvi, Marco

2013-08-01

For all experiments dealing with the rare event searches (neutrino, dark matter, neutrino-less double-beta decay), the reduction of the radioactive background is one of the most important and difficult tasks. There are basically two types of background, electron recoils and nuclear recoils. The electron recoil background is mostly from the gamma rays through the radioactive decay. The nuclear recoil background is from neutrons from spontaneous fission, (α, n) reactions and muoninduced interactions (spallations, photo-nuclear and hadronic interaction). The external gammas and neutrons from the muons and laboratory environment, can be reduced by operating the detector at deep underground laboratories and by placing active or passive shield materials around the detector. The radioactivity of the detector materials also contributes to the background; in order to reduce it a careful screening campaign is mandatory to select highly radio-pure materials. In this review I present the status of current Monte Carlo simulations aimed to estimate and reproduce the background induced by gamma and neutron radioactivity of the materials and the shield of rare event search experiment. For the electromagnetic background a good level of agreement between the data and the MC simulation has been reached by the XENON100 and EDELWEISS experiments, using the GEANT4 toolkit. For the neutron background, a comparison between the yield of neutrons from spontaneous fission and (α, n) obtained with two dedicated softwares, SOURCES-4A and the one developed by Mei-Zhang-Hime, show a good overall agreement, with total yields within a factor 2 difference. The energy spectra from SOURCES-4A are in general smoother, while those from MZH presents sharp peaks. The neutron propagation through various materials has been studied with two MC codes, GEANT4 and MCNPX, showing a reasonably good agreement, inside 50% discrepancy.

Survey of background scattering from materials found in small-angle neutron scattering.

PubMed

Barker, J G; Mildner, D F R

2015-08-01

Measurements and calculations of beam attenuation and background scattering for common materials placed in a neutron beam are presented over the temperature range of 300-700 K. Time-of-flight (TOF) measurements have also been made, to determine the fraction of the background that is either inelastic or quasi-elastic scattering as measured with a 3 He detector. Other background sources considered include double Bragg diffraction from windows or samples, scattering from gases, and phonon scattering from solids. Background from the residual air in detector vacuum vessels and scattering from the 3 He detector dome are presented. The thickness dependence of the multiple scattering correction for forward scattering from water is calculated. Inelastic phonon background scattering at small angles for crystalline solids is both modeled and compared with measurements. Methods of maximizing the signal-to-noise ratio by material selection, choice of sample thickness and wavelength, removal of inelastic background by TOF or Be filters, and removal of spin-flip scattering with polarized beam analysis are discussed.

Survey of background scattering from materials found in small-angle neutron scattering

PubMed Central

Barker, J. G.; Mildner, D. F. R.

2015-01-01

Measurements and calculations of beam attenuation and background scattering for common materials placed in a neutron beam are presented over the temperature range of 300–700 K. Time-of-flight (TOF) measurements have also been made, to determine the fraction of the background that is either inelastic or quasi-elastic scattering as measured with a 3He detector. Other background sources considered include double Bragg diffraction from windows or samples, scattering from gases, and phonon scattering from solids. Background from the residual air in detector vacuum vessels and scattering from the 3He detector dome are presented. The thickness dependence of the multiple scattering correction for forward scattering from water is calculated. Inelastic phonon background scattering at small angles for crystalline solids is both modeled and compared with measurements. Methods of maximizing the signal-to-noise ratio by material selection, choice of sample thickness and wavelength, removal of inelastic background by TOF or Be filters, and removal of spin-flip scattering with polarized beam analysis are discussed. PMID:26306088

Regional Background Fine Particulate Matter

EPA Science Inventory

A modeling system composed of the global model GEOS-Chem providing hourly lateral boundary conditions to the regional model CMAQ was used to calculate the policy relevant background level of fine particulate: matter. Simulations were performed for the full year of 2004 over the d...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, Stacy; English, Shawn; Briggs, Timothy

Fiber-reinforced composite materials offer light-weight solutions to many structural challenges. In the development of high-performance composite structures, a thorough understanding is required of the composite materials themselves as well as methods for the analysis and failure prediction of the relevant composite structures. However, the mechanical properties required for the complete constitutive definition of a composite material can be difficult to determine through experimentation. Therefore, efficient methods are necessary that can be used to determine which properties are relevant to the analysis of a specific structure and to establish a structure's response to a material parameter that can only be definedmore » through estimation. The objectives of this paper deal with demonstrating the potential value of sensitivity and uncertainty quantification techniques during the failure analysis of loaded composite structures; and the proposed methods are applied to the simulation of the four-point flexural characterization of a carbon fiber composite material. Utilizing a recently implemented, phenomenological orthotropic material model that is capable of predicting progressive composite damage and failure, a sensitivity analysis is completed to establish which material parameters are truly relevant to a simulation's outcome. Then, a parameter study is completed to determine the effect of the relevant material properties' expected variations on the simulated four-point flexural behavior as well as to determine the value of an unknown material property. This process demonstrates the ability to formulate accurate predictions in the absence of a rigorous material characterization effort. Finally, the presented results indicate that a sensitivity analysis and parameter study can be used to streamline the material definition process as the described flexural characterization was used for model validation.« less

Where's the Race in Culturally Relevant Pedagogy?

ERIC Educational Resources Information Center

Milner, H. Richard, IV

2017-01-01

Background/Context: When Ladson-Billings described the pedagogical practices of successful teachers of African American children and consequently conceptualized culturally relevant pedagogy as an analytic resource to describe and make sense of pedagogical practices of teachers, her discussion was situated in a frame that examined instructional…

Purification of infectious human herpesvirus 6A virions and association of host cell proteins

PubMed Central

Hammarstedt, Maria; Ahlqvist, Jenny; Jacobson, Steven; Garoff, Henrik; Fogdell-Hahn, Anna

2007-01-01

Background Viruses that are incorporating host cell proteins might trigger autoimmune diseases. It is therefore of interest to identify possible host proteins associated with viruses, especially for enveloped viruses that have been suggested to play a role in autoimmune diseases, like human herpesvirus 6A (HHV-6A) in multiple sclerosis (MS). Results We have established a method for rapid and morphology preserving purification of HHV-6A virions, which in combination with parallel analyses with background control material released from mock-infected cells facilitates qualitative and quantitative investigations of the protein content of HHV-6A virions. In our iodixanol gradient purified preparation, we detected high levels of viral DNA by real-time PCR and viral proteins by metabolic labelling, silver staining and western blots. In contrast, the background level of cellular contamination was low in the purified samples as demonstrated by the silver staining and metabolic labelling analyses. Western blot analyses showed that the cellular complement protein CD46, the receptor for HHV-6A, is associated with the purified and infectious virions. Also, the cellular proteins clathrin, ezrin and Tsg101 are associated with intact HHV-6A virions. Conclusion Cellular proteins are associated with HHV-6A virions. The relevance of the association in disease and especially in autoimmunity will be further investigated. PMID:17949490

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ushizima, Daniela M.; Bianchi, Andrea G. C.; DeBianchi, Christina

We introduce a computational analysis workflow to access properties of solid objects using nondestructive imaging techniques that rely on X-ray imaging. The goal is to process and quantify structures from material science sample cross sections. The algorithms can differentiate the porous media (high density material) from the void (background, low density media) using a Boolean classifier, so that we can extract features, such as volume, surface area, granularity spectrum, porosity, among others. Our workflow, Quant-CT, leverages several algorithms from ImageJ, such as statistical region merging and 3D object counter. It also includes schemes for bilateral filtering that use a 3Dmore » kernel, for parallel processing of sub-stacks, and for handling over-segmentation using histogram similarities. The Quant-CT supports fast user interaction, providing the ability for the user to train the algorithm via subsamples to feed its core algorithms with automated parameterization. Quant-CT plugin is currently available for testing by personnel at the Advanced Light Source and Earth Sciences Divisions and Energy Frontier Research Center (EFRC), LBNL, as part of their research on porous materials. The goal is to understand the processes in fluid-rock systems for the geologic sequestration of CO2, and to develop technology for the safe storage of CO2 in deep subsurface rock formations. We describe our implementation, and demonstrate our plugin on porous material images. This paper targets end-users, with relevant information for developers to extend its current capabilities.« less

IPY STEM Polar Connections Links Teachers with the Global Relevance of the High Latitudes

NASA Astrophysics Data System (ADS)

Brigham-Grette, J.; Sternheim, M.; Bradley, R.; Caissie, B.; Snyder, R.; Devlin, K.; Silver, M.; Hargraves, H.

2008-12-01

IPY STEM Polar Connections is a curriculum development and professional development program involving a summer residential institute at UMass-Amherst and academic year, on-line communication for teachers involved in the professional development of colleagues. The project produces and disseminates a range of curriculum modules related to the Polar regions and climate change. The purpose of the summer institutes (2008 and 2009) is to test the modules and prepare teachers to disseminate selected materials in workshops in their districts, in their states and nationally. The institute agenda balanced content presentations with hands-on activities for use by teachers with diverse backgrounds and classroom settings. Power point presentations and accompanying flash videos are all posted on our website along with teacher guides and student handouts. Most of the materials were designed to be adaptable to a range of inquiry-based levels. The teachers shared their own experiences with dissemination in rounds of focus groups. Pre institute and post institute surveys confirmed our success in increasing the personal knowledge base of the teachers despite the fact that most were veteran teachers. The main outcomes of participation were the development of relationships with other teachers, enhanced knowledge of earth system science and inspiration for introducing the materials to their students. Many did see funding, time and state frameworks as potential barriers to including materials in their classrooms.

Investigation of Natural Radioactivity in a Monazite Processing Plant in Japan.

PubMed

Iwaoka, Kazuki; Yajima, Kazuaki; Suzuki, Toshikazu; Yonehara, Hidenori; Hosoda, Masahiro; Tokonami, Shinji; Kanda, Reiko

2017-09-01

Monazite is a naturally occurring radioactive material that is processed for use in a variety of domestic applications. At present, there is little information available on potential radiation doses experienced by people working with monazite. The ambient dose rate and activity concentration of natural radionuclides in raw materials, products, and dust in work sites as well as the Rn and Rn concentrations in work sites were measured in a monazite processing plant in Japan. Dose estimations for plant workers were also conducted. The activity concentration of the U series in raw materials and products for the monazite processing plant was found to be higher than the relevant values described in the International Atomic Energy Agency Safety Standards. The ambient dose rates in the raw material yard were higher than those in other work sites. Moreover, the activity concentrations of dust in the milling site were higher than those in other work sites. The Rn concentrations in all work sites were almost the same as those in regular indoor environments in Japan. The Rn concentrations in all work sites were much higher than those in regular indoor environments in Japan. The maximum value of the effective dose for workers was 0.62 mSv y, which is lower than the reference level range (1-20 mSv y) for abnormally high levels of natural background radiation published in the International Commission of Radiological Protection Publication 103.

Bone tissue engineering using silica-based mesoporous nanobiomaterials:Recent progress.

PubMed

Shadjou, Nasrin; Hasanzadeh, Mohammad

2015-10-01

Bone disorders are of significant concern due to increase in the median age of our population. It is in this context that tissue engineering has been emerging as a valid approach to the current therapies for bone regeneration/substitution. Tissue-engineered bone constructs have the potential to alleviate the demand arising from the shortage of suitable autograft and allograft materials for augmenting bone healing. Silica based mesostructured nanomaterials possessing pore sizes in the range 2-50 nm and surface reactive functionalities have elicited immense interest due to their exciting prospects in bone tissue engineering. In this review we describe application of silica-based mesoporous nanomaterials for bone tissue engineering. We summarize the preparation methods, the effect of mesopore templates and composition on the mesopore-structure characteristics, and different forms of these materials, including particles, fibers, spheres, scaffolds and composites. Also, the effect of structural and textural properties of mesoporous materials on development of new biomaterials for production of bone implants and bone cements was discussed. Also, application of different mesoporous materials on construction of manufacture 3-dimensional scaffolds for bone tissue engineering was discussed. It begins by giving the reader a brief background on tissue engineering, followed by a comprehensive description of all the relevant components of silica-based mesoporous biomaterials on bone tissue engineering, going from materials to scaffolds and from cells to tissue engineering strategies that will lead to "engineered" bone. Copyright © 2015 Elsevier B.V. All rights reserved.

A method for Removing Surface Contamination on Ultra-pure Copper Spectrometer Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoppe, Eric W.; Seifert, Allen; Aalseth, Craig E.

Spectrometers for the lowest-level radiometric measurements require materials of extreme radiopurity. Measurements of rare nuclear decays, e.g. neutrinoless double-beta decay, can require construction and shielding materials with bulk radiopurity reaching one micro-Becquerel per kilogram or less. When such extreme material purity is achieved, surface contamination, particularly solid daughters in the natural radon decay chains, can become the limiting background. High-purity copper is an important material for ultra-low-background spectrometers and thus is the focus of this work. A method for removing surface contamination at very low levels without attacking the bulk material is described. An assay method using a low-background proportionalmore » counter made of the material under examination is employed, and the resulting preliminary result of achievable surface contamination levels is presented.« less

49 CFR 209.111 - Informal response and assessment.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., information or materials, submitted by the respondent and relevant information presented during any conference... consideration of an informal response, including any relevant information presented at a conference, the Chief... written explanations, information or other materials as respondent may desire in answer to the charges or...

Infection as a Background to Safety: Source Material for Teaching.

ERIC Educational Resources Information Center

Wyatt, H. V.

1986-01-01

Offers selections from papers which illustrate accidents, epidemics, and bad practices which could be used as background material for lessons on laboratory safety. Advocates the need for instruction on pathogenicity and infectivity. (ML)

Brain dynamics in spider-phobic individuals exposed to phobia-relevant and other emotional stimuli.

PubMed

Michalowski, Jaroslaw M; Melzig, Christiane A; Weike, Almut I; Stockburger, Jessica; Schupp, Harald T; Hamm, Alfons O

2009-06-01

Dense sensor event-related brain potentials were measured in participants with spider phobia and nonfearful controls during viewing of phobia-relevant spider and standard emotional (pleasant, unpleasant, neutral) pictures. Irrespective of the picture content, spider phobia participants responded with larger P1 amplitudes than controls, suggesting increased vigilance in this group. Furthermore, spider phobia participants showed a significantly enlarged early posterior negativity (EPN) and late positive potential (LPP) during the encoding of phobia-relevant pictures compared to nonfearful controls. No group differences were observed for standard emotional materials indicating that these effects were specific to phobia-relevant material. Within group comparisons of the spider phobia group, though, revealed comparable EPN and LPP evoked by spider pictures and emotional (unpleasant and pleasant) picture contents. These results demonstrate a temporal unfolding in perceptual processing from unspecific vigilance (P1) to preferential responding (EPN and LPP) to phobia-relevant materials in the spider phobia group. However, at the level of early stimulus processing, these effects of increased attention seem to be related to emotional relevance of the stimulus cues rather than reflecting a fear-specific response.

The Curricular Integration of Ethics: Theory and Practice.

ERIC Educational Resources Information Center

Lisman, C. David

This book offers philosophical and pedagogical background to help faculty and academic administrators integrate ethics into curricula. The volume suggests the most appropriate way is through instructor-guided discussion of ethical issues relevant to course objectives. The book demonstrates how providing ethical discussions of relevant ethical…

Promoting improved family caregiver health literacy: evaluation of caregiver communication resources.

PubMed

Wittenberg, Elaine; Goldsmith, Joy; Ferrell, Betty; Ragan, Sandra L

2017-07-01

Family caregivers of cancer patients have a vital role in facilitating and sharing information about cancer, revealing a need to develop caregiver health literacy skills to support caregiver communication. The goal of this study was to investigate caregiver print materials and develop and assess a new caregiver communication resource titled A Communication Guide for Caregivers TM . Using a model of six domains of caregiver health literacy skills, print cancer education materials were collected and evaluated for caregiver communication support. A new caregiver communication resource was also developed and assessed by caregivers and healthcare providers. Caregivers reviewed content and assessed utility, relatability, and reading quality. Healthcare providers also assessed whether the material would be understandable and usable for cancer caregivers. Only three of the 28 print materials evaluated were written at the recommended sixth grade reading level and only five addressed all six caregiver health literacy skills. Readability scores for A Communication Guide for Caregivers TM were at the sixth grade level, and caregivers reported its contents were relatable, useful, and easy to read. Healthcare providers also rated the material as easy for patient/family members of diverse backgrounds and varying levels of literacy to understand and use. Existing print-based caregiver education materials do not address caregivers' health literacy skill needs and are aimed at a highly literate caregiving population. A Communication Guide for Caregivers TM meets health literacy standards and family caregiver and provider communication needs. The findings are relevant for healthcare professionals who provide cancer education. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Volumetric analysis of bone substitute material performance within the human sinus cavity of former head and neck cancer patients: A prospective, randomized clinical trial

PubMed Central

Lorenz, Jonas; Eichler, Kathrin; Barbeck, Mike; Lerner, Henriette; Stübinger, Stefan; Seipel, Catherine; Vogl, Thomas J.; Kovács, Adorján F.; Ghanaati, Shahram; Sader, Robert A.

2016-01-01

Background: In numerous animal and human studies, it could be detected that in bone augmentation procedures, material's physicochemical characteristics can influence the cellular inflammatory pattern and therefore the integration in the host tissue. Histological, histomorphometrical, and clinical analyses of the integration of the biomaterial in the surrounding tissue are well established methodologies; however, they do not make a statement on volume and density changes of the augmented biomaterial. Aims: The aim of the present study was to assess the volume and density of a xenogeneic (Bio-Oss®, BO) and a synthetic (NanoBone®, NB) bone substitute material in split-mouth sinus augmentations in former tumor patients to complete histological and histomorphometrical assessment. Methods: Immediately and 6 months after sinus augmentation computed tomography scans were recorded, bone grafts were marked, and the volume was calculated with radiologic RIS-PACS software (General Electric Healthcare, Chalfont St. Giles, Great Britain) to determine the integration and degradation behavior of both biomaterials. Results: Radiographic analysis revealed a volume reduction of the initial augmented bone substitute material (i.e. 100%) to 77.36 (±11.68) % in the BO-group, respectively, 75.82 (±22.28) % in the NB-group six months after augmentation. In both materials, the volume reduction was not significant. Bone density significantly increased in both groups. Conclusion: The presented radiological investigation presents a favorable method to obtain clinically relevant information concerning the integration and degradation behavior of bone substitute materials. PMID:28299254

Evaluation of the acceptability of a CD-Rom as a health promotion tool for Inuit in Ottawa

PubMed Central

McShane, Kelly E.; Smylie, Janet K.; Hastings, Paul D.; Prince, Conrad; Siedule, Connie

2013-01-01

Background There are few health promotion tools for urban Inuit, and there is a specific dearth of evaluations on such tools. Objective The current study used a community-specific approach in the evaluation of a health promotion tool, based on an urban Inuit community's preferences of health knowledge sources and distribution strategies. In partnership with the Tungasuvvingat Inuit Family Health Team in Ottawa, a CD-Rom was developed featuring an Inuk Elder presenting prenatal health messages in both Inuktitut and English. Also, relevant evaluation materials were developed. Design Using a mixed methods approach, 40 participants completed interviews prior to viewing the CD-Rom and participated in a focus group at follow-up. Questionnaires were also completed pre- and post-viewing to assess changes between expectations and reactions in order to document acceptability. Results Significant increases were found on satisfaction, acceptability of medium and relevance of content ratings. Qualitative findings also included (a) interest, uncertainty and conditional interest prior to viewing; and (b) positive evaluations of the CD-Rom. Conclusions This suggests that CD-Rom technology has the potential for health promotion for urban Inuit, and the community-specific evaluation approach yielded useful information. PMID:23717816

International strategy for fusion materials development

NASA Astrophysics Data System (ADS)

Ehrlich, Karl; Bloom, E. E.; Kondo, T.

2000-12-01

In this paper, the results of an IEA-Workshop on Strategy and Planning of Fusion Materials Research and Development (R&D), held in October 1998 in Risø Denmark are summarised and further developed. Essential performance targets for materials to be used in first wall/breeding blanket components have been defined for the major materials groups under discussion: ferritic-martensitic steels, vanadium alloys and ceramic composites of the SiC/SiC-type. R&D strategies are proposed for their further development and qualification as reactor-relevant materials. The important role of existing irradiation facilities (mainly fission reactors) for materials testing within the next decade is described, and the limits for the transfer of results from such simulation experiments to fusion-relevant conditions are addressed. The importance of a fusion-relevant high-intensity neutron source for the development of structural as well as breeding and special purpose materials is elaborated and the reasons for the selection of an accelerator-driven D-Li-neutron source - the International Fusion Materials Irradiation Facility (IFMIF) - as an appropriate test bed are explained. Finally the necessity to execute the materials programme for fusion in close international collaboration, presently promoted by the International Energy Agency, IEA is emphasised.

Federal Guidance Report No. 5: Background Material for the Development of Radiation Protection Standards

EPA Pesticide Factsheets

This report contains background material used in the development of guidance for Federal agencies in respect to planning protective actions to reduce potential doses from radioactive fission products to the population.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Selvi, Marco

For all experiments dealing with the rare event searches (neutrino, dark matter, neutrino-less double-beta decay), the reduction of the radioactive background is one of the most important and difficult tasks. There are basically two types of background, electron recoils and nuclear recoils. The electron recoil background is mostly from the gamma rays through the radioactive decay. The nuclear recoil background is from neutrons from spontaneous fission, (α, n) reactions and muoninduced interactions (spallations, photo-nuclear and hadronic interaction). The external gammas and neutrons from the muons and laboratory environment, can be reduced by operating the detector at deep underground laboratories andmore » by placing active or passive shield materials around the detector. The radioactivity of the detector materials also contributes to the background; in order to reduce it a careful screening campaign is mandatory to select highly radio-pure materials. In this review I present the status of current Monte Carlo simulations aimed to estimate and reproduce the background induced by gamma and neutron radioactivity of the materials and the shield of rare event search experiment. For the electromagnetic background a good level of agreement between the data and the MC simulation has been reached by the XENON100 and EDELWEISS experiments, using the GEANT4 toolkit. For the neutron background, a comparison between the yield of neutrons from spontaneous fission and (α, n) obtained with two dedicated softwares, SOURCES-4A and the one developed by Mei-Zhang-Hime, show a good overall agreement, with total yields within a factor 2 difference. The energy spectra from SOURCES-4A are in general smoother, while those from MZH presents sharp peaks. The neutron propagation through various materials has been studied with two MC codes, GEANT4 and MCNPX, showing a reasonably good agreement, inside 50% discrepancy.« less

Composite laminate failure parameter optimization through four-point flexure experimentation and analysis

DOE PAGES

Nelson, Stacy; English, Shawn; Briggs, Timothy

2016-05-06

Fiber-reinforced composite materials offer light-weight solutions to many structural challenges. In the development of high-performance composite structures, a thorough understanding is required of the composite materials themselves as well as methods for the analysis and failure prediction of the relevant composite structures. However, the mechanical properties required for the complete constitutive definition of a composite material can be difficult to determine through experimentation. Therefore, efficient methods are necessary that can be used to determine which properties are relevant to the analysis of a specific structure and to establish a structure's response to a material parameter that can only be definedmore » through estimation. The objectives of this paper deal with demonstrating the potential value of sensitivity and uncertainty quantification techniques during the failure analysis of loaded composite structures; and the proposed methods are applied to the simulation of the four-point flexural characterization of a carbon fiber composite material. Utilizing a recently implemented, phenomenological orthotropic material model that is capable of predicting progressive composite damage and failure, a sensitivity analysis is completed to establish which material parameters are truly relevant to a simulation's outcome. Then, a parameter study is completed to determine the effect of the relevant material properties' expected variations on the simulated four-point flexural behavior as well as to determine the value of an unknown material property. This process demonstrates the ability to formulate accurate predictions in the absence of a rigorous material characterization effort. Finally, the presented results indicate that a sensitivity analysis and parameter study can be used to streamline the material definition process as the described flexural characterization was used for model validation.« less

The Singapore Armed Forces: Are Citizen-Soldiers Still Relevant Today?

DTIC Science & Technology

2011-03-14

Defence and Strategic Studies." Shangri - La Hotel , Singapore: IDSS, January 13, 2005. MINDEF. "News by Deputy Prime Minister and Minister for Defence... Introduction ............................................................................................................................... ! 1.1 Background of... INTRODUCTION Conscription will remain relevant for Singapore even as global trends indicate more countries are gravitating towards an All-Volunteer

Epistemic Authority of Professors and Researchers: Differential Perceptions by Students from Two Cultural-Educational Systems

ERIC Educational Resources Information Center

Hornikx, Jos

2011-01-01

Teachers and researchers are considered epistemic authorities that provide reliable information if that information is relevant to their discipline. Students differentiate between relevant and irrelevant disciplines when assessing teachers' expertise. In this paper, it is investigated whether students' cultural-educational background plays a role…

Culturally Relevant Pedagogies: Possibilities and Challenges for African Canadian Children

ERIC Educational Resources Information Center

Henry, Annette

2017-01-01

Background/Context: Ladson-Billings's concept of Culturally Relevant Pedagogy for African American children has been widely reinterpreted in various contexts for racialized students. In this reflective essay, I consider its challenges in Canadian contexts. Focus: I use my early ethnographic work to illustrate important aspects of culturally…

Culturally Relevant Pedagogy: Clashes and Confrontations

ERIC Educational Resources Information Center

Scherff, Lisa, Ed.; Spector, Karen, Ed.

2010-01-01

The authors in this edited volume reflect on their experiences with culturally relevant pedagogy--as students, as teachers, as researchers--and how these experiences were often at odds with their backgrounds and/or expectations. Each of the authors speaks to the complexity and difficulty in attempting to address students' cultures, create learning…

Impact of Environmental Enrichment Devices on NTP In Vivo Studies

PubMed Central

Churchill, Sheba R.; Morgan, Daniel L.; Kissling, Grace E.; Travlos, Gregory S.; King-Herbert, Angela P.

2015-01-01

The goal of this study was to determine whether the use of nesting material or polycarbonate shelters, as enrichment devices would have an impact on endpoints commonly measured during the conduct of the National Toxicology Program (NTP) 13-week studies. The study design was consistent with the NTP 13-week toxicity studies. Harlan Sprague Dawley (HSD) rats and their offspring, and B6C3F1/N mice were assigned to control (unenriched) and enriched experimental groups. Body weight, food and water consumption, behavioral observations, fecal content, clinical pathology, gross pathology, organ weights, and histopathology were evaluated. Enriched male mice and male and female rats exhibited decreased feed intake without a subsequent decrease in body weight; this may have been the result of the nesting material reducing the effect of cold stress thereby allowing for more efficient use of feed. There were statistical differences in some hematological parameters, however these were not considered physiologically relevant since all values were within the normal range. Gross pathology and histopathological findings were background changes and were not considered enrichment-related. Nesting material and shelters were used frequently and consistently and allowed animals to display species typical behavior. There was no significant impact on commonly measured endpoints in HSD rats and B6C3F1/N mice given enrichment devices. PMID:26873679

Gavialis from the Pleistocene of Thailand and Its Relevance for Drainage Connections from India to Java

PubMed Central

Martin, Jeremy E.; Buffetaut, Eric; Naksri, Wilailuck; Lauprasert, Komsorn; Claude, Julien

2012-01-01

Background The genus Gavialis comprises a single living but endangered species, G. gangeticus, as well as fossil species recorded in the Miocene to Pleistocene deposits of the Indian subcontinent. The genus is also represented in the Pleistocene deposits of Java by the species G. bengawanicus, which was recently recognized to be valid. Surprisingly, no detailed report of the genus exists between these two provinces and the recent evolutionary history of Gavialis is not understood. Methodology/Principal Findings We report new material consisting of skull and mandibular remains of Gavialis from the Early Pleistocene of Khok Sung, Nakhon Ratchasima Province, northeastern Thailand. The Gavialis material described herein is attributed to Gavialis cf. bengawanicus and sheds new light on the occurrence of the genus in mainland SE Asia. Conclusions/Significance Comparison of this new material with other species referred to the genus Gavialis led us to preliminary restrict the content of the genus to three species, namely G. gangeticus Gmelin, G. bengawanicus Dubois and G. lewisi Lull. The occurrence of G. cf. bengawanicus in Thailand allows us to propose a scenario for the dispersal of Gavialis from Indo-Pakistan to Indonesia, thus bridging a geographical gap between these two provinces. Dispersal by sea appears a less likely possibility than dispersal through fluvial drainages. PMID:23028557

Online Respondent-Driven Sampling for Studying Contact Patterns Relevant for the Spread of Close-Contact Pathogens: A Pilot Study in Thailand

PubMed Central

Stein, Mart L.; van Steenbergen, Jim E.; Chanyasanha, Charnchudhi; Tipayamongkholgul, Mathuros; Buskens, Vincent; van der Heijden, Peter G. M.; Sabaiwan, Wasamon; Bengtsson, Linus; Lu, Xin; Thorson, Anna E.; Kretzschmar, Mirjam E. E.

2014-01-01

Background Information on social interactions is needed to understand the spread of airborne infections through a population. Previous studies mostly collected egocentric information of independent respondents with self-reported information about contacts. Respondent-driven sampling (RDS) is a sampling technique allowing respondents to recruit contacts from their social network. We explored the feasibility of webRDS for studying contact patterns relevant for the spread of respiratory pathogens. Materials and Methods We developed a webRDS system for facilitating and tracking recruitment by Facebook and email. One-day diary surveys were conducted by applying webRDS among a convenience sample of Thai students. Students were asked to record numbers of contacts at different settings and self-reported influenza-like-illness symptoms, and to recruit four contacts whom they had met in the previous week. Contacts were asked to do the same to create a network tree of socially connected individuals. Correlations between linked individuals were analysed to investigate assortativity within networks. Results We reached up to 6 waves of contacts of initial respondents, using only non-material incentives. Forty-four (23.0%) of the initially approached students recruited one or more contacts. In total 257 persons participated, of which 168 (65.4%) were recruited by others. Facebook was the most popular recruitment option (45.1%). Strong assortative mixing was seen by age, gender and education, indicating a tendency of respondents to connect to contacts with similar characteristics. Random mixing was seen by reported number of daily contacts. Conclusions Despite methodological challenges (e.g. clustering among respondents and their contacts), applying RDS provides new insights in mixing patterns relevant for close-contact infections in real-world networks. Such information increases our knowledge of the transmission of respiratory infections within populations and can be used to improve existing modelling approaches. It is worthwhile to further develop and explore webRDS for the detection of clusters of respiratory symptoms in social networks. PMID:24416371

Creating Culturally Relevant Instructional Materials: A Swaziland Case Study

ERIC Educational Resources Information Center

Titone, Connie; Plummer, Emily C.; Kielar, Melissa A.

2012-01-01

In the field of English language learning, research proves that culturally relevant reading materials improve students' language acquisition, learning motivation, self-esteem, and identity formation. Since English is the language of instruction in many distant countries, such as Swaziland, even when English is not the native language of those…

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, J.E.; Roussin, R.W.; Gilpin, H.

A version of the CRAC2 computer code applicable for use in analyses of consequences and risks of reactor accidents in case work for environmental statements has been implemented for use on the Nuclear Regulatory Commission Data General MV/8000 computer system. Input preparation is facilitated through the use of an interactive computer program which operates on an IBM personal computer. The resulting CRAC2 input deck is transmitted to the MV/8000 by using an error-free file transfer mechanism. To facilitate the use of CRAC2 at NRC, relevant background material on input requirements and model descriptions has been extracted from four reports -more » ''Calculations of Reactor Accident Consequences,'' Version 2, NUREG/CR-2326 (SAND81-1994) and ''CRAC2 Model Descriptions,'' NUREG/CR-2552 (SAND82-0342), ''CRAC Calculations for Accident Sections of Environmental Statements, '' NUREG/CR-2901 (SAND82-1693), and ''Sensitivity and Uncertainty Studies of the CRAC2 Computer Code,'' NUREG/CR-4038 (ORNL-6114). When this background information is combined with instructions on the input processor, this report provides a self-contained guide for preparing CRAC2 input data with a specific orientation toward applications on the MV/8000. 8 refs., 11 figs., 10 tabs.« less

Hypothesis tests for the detection of constant speed radiation moving sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dumazert, Jonathan; Coulon, Romain; Kondrasovs, Vladimir

2015-07-01

Radiation Portal Monitors are deployed in linear network to detect radiological material in motion. As a complement to single and multichannel detection algorithms, inefficient under too low signal to noise ratios, temporal correlation algorithms have been introduced. Test hypothesis methods based on empirically estimated mean and variance of the signals delivered by the different channels have shown significant gain in terms of a tradeoff between detection sensitivity and false alarm probability. This paper discloses the concept of a new hypothesis test for temporal correlation detection methods, taking advantage of the Poisson nature of the registered counting signals, and establishes amore » benchmark between this test and its empirical counterpart. The simulation study validates that in the four relevant configurations of a pedestrian source carrier under respectively high and low count rate radioactive background, and a vehicle source carrier under the same respectively high and low count rate radioactive background, the newly introduced hypothesis test ensures a significantly improved compromise between sensitivity and false alarm, while guaranteeing the stability of its optimization parameter regardless of signal to noise ratio variations between 2 to 0.8. (authors)« less

Application of Digital Technology and PDA+APPS Mobile Terminal in Historical Architecture Culture Protection and Development

NASA Astrophysics Data System (ADS)

Liu, Zhi Feng; Wang, Ying; Huang, Dong Hui

2018-06-01

In the wake of big data and Internet plus era, continuous infiltration of digital technology has been happening in various fields of social and economic development. As the most important material carrier of historical culture, the historical value of historical buildings is produced and accumulated in its historical evolution, and it can only be protected from being created again. Based on the background of digitization of cultural resources, this paper summarizes the relevant digital technologies for the digital translation of information on buildings of historical and cultural heritage, as a means to promote the spread of the PDA+APPS mobile terminal, so as to achieve the purpose of preservation, protection, management and publicity. Meanwhile, this paper analyzes the application of digital technology in this field and the prospect of its function.

Disentangling Public Participation In Science and Biomedicine

PubMed Central

2014-01-01

Background This article provides a framework for disentangling the concept of participation, with emphasis on participation in genomic medicine. We have derived seven ‘dimensions’ of participation that are most frequently invoked in the extensive, heterogeneous literature on participation. To exemplify these dimensions, we use material from a database of 102 contemporary cases of participation, and focus here on cases specific to science and medicine. We describe the stakes of public participation in biomedical research, with a focus on genomic medicine and lay out the seven dimensions. Discussion We single out five cases of participation that have particular relevance to the field of genomic medicine, we apply the seven dimensions to show how we can differentiate among forms of participation within this domain. Summary We conclude with some provocations to researchers and some recommendations for taking variation in participation more seriously. PMID:24479693

Improving Fluency Skills of Secondary-Level Students from Diverse Backgrounds

ERIC Educational Resources Information Center

O'Shea, Doris J.; McQuiston, Kathleen; McCollin, Michelle

2009-01-01

Many secondary-level students from culturally and linguistically diverse (CLD) backgrounds need to nurture their ongoing literacy growth to become independent, tenacious readers. Middle and high school teachers' use of direct and explicit strategies that are focused on culturally and linguistically responsive practices (e.g., use of relevant texts…

Perceptions of Head Start Teachers about Culturally Relevant Practice

ERIC Educational Resources Information Center

Gichuru, Margaret; Riley, Jeanetta G.; Robertson, Jo; Park, Mi-Hwa

2015-01-01

Children bring a variety of cultural, linguistic, and social backgrounds into the preschool classroom. When teachers consider these backgrounds, they are better able to create environments that reflect children's cultures and to design learning experiences that build on children's prior experiences. This qualitative study examined how children's…

Increasing Reading Achievement of Students from Culturally and Linguistically Diverse Backgrounds

ERIC Educational Resources Information Center

McCollin, Michelle; O'Shea, Doris

2005-01-01

Legislative language, mandated by the newly reauthorized Individuals With Disabilities Education Improvement Act (IDEIA) of 2004 and the No Child Left Behind Act (NCLB) of 2001, underscores a number of issues relevant to students from culturally and linguistically diverse backgrounds displaying reading-achievement difficulties. In this article,…

An assessment of contemporary atomic spectroscopic techniques for the determination of lead in blood and urine matrices

NASA Astrophysics Data System (ADS)

Parsons, Patrick J.; Geraghty, Ciaran; Verostek, Mary Frances

2001-09-01

The preparation and validation of a number of clinical reference materials for the determination of lead in blood and urine is described. Four candidate blood lead reference materials (Lots, 047-050), and four candidate urine lead reference materials (Lots, 034, 035, 037 and 038), containing physiologically-bound lead at clinically relevant concentrations, were circulated to up to 21 selected laboratories specializing in this analysis. Results from two interlaboratory studies were used to establish certified values and uncertainty estimates for these reference materials. These data also provided an assessment of current laboratory techniques for the measurement of lead in blood and urine. For the blood lead measurements, four laboratories used electrothermal atomization AAS, three used anodic stripping voltammetry and one used both ETAAS and ICP-MS. For the urine lead measurements, 11 laboratories used ETAAS (most with Zeeman background correction) and 10 used ICP-MS. Certified blood lead concentrations, ±S.D., ranged from 5.9±0.4 μg/dl (0.28±0.02 μmol/l) to 76.0±2.2 μg/dl (3.67±0.11 μmol/l) and urine lead concentrations ranged from 98±5 μg/l (0.47±0.02 μmol/l) to 641±36 μg/l (3.09±0.17 μmol/l). The highest concentration blood lead material was subjected to multiple analyses using ETAAS over an extended time period. The data indicate that more stringent internal quality control practices are necessary to improve long-term precision. While the certification of blood lead materials was accomplished in a manner consistent with established practices, the urine lead materials proved more troublesome, particularly at concentrations above 600 μg/l (2.90 μmol/l).

Recommending Education Materials for Diabetic Questions Using Information Retrieval Approaches

PubMed Central

Wang, Yanshan; Shen, Feichen; Liu, Sijia; Rastegar-Mojarad, Majid; Wang, Liwei

2017-01-01

Background Self-management is crucial to diabetes care and providing expert-vetted content for answering patients’ questions is crucial in facilitating patient self-management. Objective The aim is to investigate the use of information retrieval techniques in recommending patient education materials for diabetic questions of patients. Methods We compared two retrieval algorithms, one based on Latent Dirichlet Allocation topic modeling (topic modeling-based model) and one based on semantic group (semantic group-based model), with the baseline retrieval models, vector space model (VSM), in recommending diabetic patient education materials to diabetic questions posted on the TuDiabetes forum. The evaluation was based on a gold standard dataset consisting of 50 randomly selected diabetic questions where the relevancy of diabetic education materials to the questions was manually assigned by two experts. The performance was assessed using precision of top-ranked documents. Results We retrieved 7510 diabetic questions on the forum and 144 diabetic patient educational materials from the patient education database at Mayo Clinic. The mapping rate of words in each corpus mapped to the Unified Medical Language System (UMLS) was significantly different (P<.001). The topic modeling-based model outperformed the other retrieval algorithms. For example, for the top-retrieved document, the precision of the topic modeling-based, semantic group-based, and VSM models was 67.0%, 62.8%, and 54.3%, respectively. Conclusions This study demonstrated that topic modeling can mitigate the vocabulary difference and it achieved the best performance in recommending education materials for answering patients’ questions. One direction for future work is to assess the generalizability of our findings and to extend our study to other disease areas, other patient education material resources, and online forums. PMID:29038097

Development of Guidelines and Resource Materials on Latin America for Use in Grades 1-12. Final Report.

ERIC Educational Resources Information Center

Gill, Clark C.; Conroy, William B.

The Latin America Project (1966-69) consisted of two phases: (1) completion of background studies and (2) preparation, field testing, and evaluation of instructional materials. Five background bulletins were prepared and distributed (See ED 012 832, ED 012 833, ED 012 365, ED 013 342, ED 022 781) and instructional materials organized around…

Research Area 3 - Mathematical Sciences: Multiscale Modeling of the Mechanics of Advanced Energetic Materials Relevant to Detonation Prediction

DTIC Science & Technology

2015-08-24

new energetic materials with enhanced energy release rates and reduced sensitivity to unintentional detonation . The following results have been...Mechanics of Advanced Energetic Materials Relevant to Detonation Prediction The views, opinions and/or findings contained in this report are those of the...modeling, molecular simulations, detonation prediction REPORT DOCUMENTATION PAGE 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 10. SPONSOR/MONITOR’S

More Realistic Face Model Surface Improves Relevance of Pediatric In-Vitro Aerosol Studies

PubMed Central

Amirav, Israel; Halamish, Asaf; Gorenberg, Miguel; Omar, Hamza; Newhouse, Michael T.

2015-01-01

Background Various hard face models are commonly used to evaluate the efficiency of aerosol face masks. Softer more realistic “face” surface materials, like skin, deform upon mask application and should provide more relevant in-vitro tests. Studies that simultaneously take into consideration many of the factors characteristic of the in vivo face are lacking. These include airways, various application forces, comparison of various devices, comparison with a hard-surface model and use of a more representative model face based on large numbers of actual faces. Aim To compare mask to “face” seal and aerosol delivery of two pediatric masks using a soft vs. a hard, appropriately representative, pediatric face model under various applied forces. Methods Two identical face models and upper airways replicas were constructed, the only difference being the suppleness and compressibility of the surface layer of the “face.” Integrity of the seal and aerosol delivery of two different masks [AeroChamber (AC) and SootherMask (SM)] were compared using a breath simulator, filter collection and realistic applied forces. Results The soft “face” significantly increased the delivery efficiency and the sealing characteristics of both masks. Aerosol delivery with the soft “face” was significantly greater for the SM compared to the AC (p< 0.01). No statistically significant difference between the two masks was observed with the hard “face.” Conclusions The material and pliability of the model “face” surface has a significant influence on both the seal and delivery efficiency of face masks. This finding should be taken into account during in-vitro aerosol studies. PMID:26090661

Guidelines for integrating population education into primary education and literacy programmes.

PubMed

1989-01-01

In recent seminars and workshops in the Asia and Pacific region the integration of population education into primary schools and literacy programs were the main topics. In most of the countries in this area separate courses in population education appear to be unfeasible for primary and secondary schools. In the nonformal area experience has indicated that population education acquires more meaning and relevance if it is integrated into an ongoing development program. The integration approach requires knowledge of the contents of the accommodating subjects or programs and knowledge of the contents of the accommodating subjects or programs and knowledge of the contents of population education. Guidelines suggested include the following steps in developing an integrated curriculum and instructional materials. First determine the needs, characteristics and other background information needed on the target group. Next prioritize the problems and needs of the target group, and formulate educational objectives from the identified needs and problems. Next determine and sequence the curriculum contents and then determine specific population education objectives and contents for integration, and what specific materials have to be developed. Then identify the specific type of format of materials to be developed, and write the first draft of the material. Also prepare illustrations and other art and graphic materials. Then the draft material should be reviewed and translated into the language of the target audience if needed. The materials should then be pretested, or field tested, using a sample of the intended users. To make sure the materials are reaching the target groups and being used effectively, a user's guide should be prepared and teachers and facilitators, as well as supervisors, should be prepared on the use of the material. In addition, a distribution and utilization plan should be prepared. Nonformal education materials can be distributed through libraries, reading center, residences of village leaders, neighborhood stores, and direct mail. The material distribution and utilization should be monitored and evaluated.

Crystal viscoplasticity model for the creep-fatigue interactions in single-crystal Ni-base superalloy CMSX-8

DOE Office of Scientific and Technical Information (OSTI.GOV)

Estrada Rodas, Ernesto A.; Neu, Richard W.

A crystal viscoplasticity (CVP) model for the creep-fatigue interactions of nickel-base superalloy CMSX-8 is proposed. At the microstructure scale of relevance, the superalloys are a composite material comprised of a γ phase and a γ' strengthening phase with unique deformation mechanisms that are highly dependent on temperature. Considering the differences in the deformation of the individual material phases is paramount to predicting the deformation behavior of superalloys at a wide range of temperatures. In this work, we account for the relevant deformation mechanisms that take place in both material phases by utilizing two additive strain rates to model the deformationmore » on each material phase. The model is capable of representing the creep-fatigue interactions in single-crystal superalloys for realistic 3-dimensional components in an Abaqus User Material Subroutine (UMAT). Using a set of material parameters calibrated to superalloy CMSX-8, the model predicts creep-fatigue, fatigue and thermomechanical fatigue behavior of this single-crystal superalloy. In conclusion, a sensitivity study of the material parameters is done to explore the effect on the deformation due to changes in the material parameters relevant to the microstructure.« less

Crystal viscoplasticity model for the creep-fatigue interactions in single-crystal Ni-base superalloy CMSX-8

DOE PAGES

Estrada Rodas, Ernesto A.; Neu, Richard W.

2017-09-11

A crystal viscoplasticity (CVP) model for the creep-fatigue interactions of nickel-base superalloy CMSX-8 is proposed. At the microstructure scale of relevance, the superalloys are a composite material comprised of a γ phase and a γ' strengthening phase with unique deformation mechanisms that are highly dependent on temperature. Considering the differences in the deformation of the individual material phases is paramount to predicting the deformation behavior of superalloys at a wide range of temperatures. In this work, we account for the relevant deformation mechanisms that take place in both material phases by utilizing two additive strain rates to model the deformationmore » on each material phase. The model is capable of representing the creep-fatigue interactions in single-crystal superalloys for realistic 3-dimensional components in an Abaqus User Material Subroutine (UMAT). Using a set of material parameters calibrated to superalloy CMSX-8, the model predicts creep-fatigue, fatigue and thermomechanical fatigue behavior of this single-crystal superalloy. In conclusion, a sensitivity study of the material parameters is done to explore the effect on the deformation due to changes in the material parameters relevant to the microstructure.« less

45 CFR 1641.3 - Scope of debarment, suspension and removal.

Code of Federal Regulations, 2011 CFR

2011-10-01

... employee, independent contractor, agent or other representative of an IPA firm. (b) Actions against IPA... elements materially involved in the relevant engagement and as to which there is cause to debar, suspend or... the IPA firm only if such firm was materially involved in the relevant engagement and is specifically...

Field evaluations of residual pesticide applications and misting system on militarily relevant materials against medically important mosquitoes in Thailand

USDA-ARS?s Scientific Manuscript database

A key strategy to reduce insect-borne disease is to reduce contact between disease vectors and hosts. In the current study, residual pesticide application and misting system were applied on militarily relevant materials and evaluated against medically important mosquitoes. Field evaluations were car...

20 CFR 404.1560 - When we will consider your vocational background.

Code of Federal Regulations, 2013 CFR

2013-04-01

... benefits based on disability which began before age 22, or widow's or widower's benefits based on... section. (b) Past relevant work. We will first compare our assessment of your residual functional capacity with the physical and mental demands of your past relevant work. See § 404.1520(h) for an exception to...

20 CFR 416.960 - When we will consider your vocational background.

Code of Federal Regulations, 2013 CFR

2013-04-01

... applying for supplemental security income benefits based on disability, and we cannot decide whether you... in paragraphs (b) and (c) of this section. (b) Past relevant work. We will first compare our... work. See § 416.920(h) for an exception to this rule. (1) Definition of past relevant work. Past...

20 CFR 416.960 - When we will consider your vocational background.

Code of Federal Regulations, 2014 CFR

2014-04-01

... applying for supplemental security income benefits based on disability, and we cannot decide whether you... in paragraphs (b) and (c) of this section. (b) Past relevant work. We will first compare our... work. See § 416.920(h) for an exception to this rule. (1) Definition of past relevant work. Past...

20 CFR 404.1560 - When we will consider your vocational background.

Code of Federal Regulations, 2014 CFR

2014-04-01

... benefits based on disability which began before age 22, or widow's or widower's benefits based on... section. (b) Past relevant work. We will first compare our assessment of your residual functional capacity with the physical and mental demands of your past relevant work. See § 404.1520(h) for an exception to...

Advocacy for Equity: Extending Culturally Relevant Pedagogy in Predominantly White Suburban Schools

ERIC Educational Resources Information Center

Warren-Grice, April

2017-01-01

Background/Context: This article describes Black educators in predominantly White suburban schools who have used advocacy through the lens of culturally relevant pedagogy and serve as Educational Cultural Negotiators to help the students of color in these spaces academically and socially. This article highlights the advocacy needed to address the…

Relevance Revisited: Curriculum Development in the Humanities. No. III: Humanists and Policy Studies.

ERIC Educational Resources Information Center

French, Roderick S., Ed.

Papers presented at a March 1977 workshop that examined issues raised by the participation of academic humanists and other humanistically oriented academics in policy research and teaching are provided. Section I contains three background papers: "The Humanist, Technology, and Policy Studies," by Joseph W. Slade; "The Relevance of…

Culturally Relevant Literature: What Matters Most to Primary-Age Urban Learners

ERIC Educational Resources Information Center

Cartledge, Gwendolyn; Keesey, Susan; Bennett, Jessica G.; Ramnath, Rajiv; Council, Morris R., III.

2016-01-01

The ratings and rationales primary-age urban learners gave culturally relevant reading passages was the focus of this descriptive study. First- and second-grade students each read 30 researcher-developed passages reflecting the students' immediate and historical backgrounds. The students rated the passages and gave a reason for their ratings. A…

20 CFR 416.960 - When we will consider your vocational background.

Code of Federal Regulations, 2010 CFR

2010-04-01

... past 15 years, that was substantial gainful activity, and that lasted long enough for you to learn to... in paragraphs (b) and (c) of this section. (b) Past relevant work. We will first compare our assessment of your residual functional capacity with the physical and mental demands of your past relevant...

Investigating the Effects of Culturally Relevant Texts on African American Struggling Readers' Progress

ERIC Educational Resources Information Center

Clark, Kathleen F.

2017-01-01

Background/Context: In a recent review of culturally relevant instruction and reading comprehension, Fairbanks, Cooper, Masterson, and Webb (2009) highlighted the paucity of research available to support the widespread claim in the literacy field that "students' social and cultural practices are deeply intertwined with literacy learning"…

Study of the cosmogenic activation in NaI(Tl) crystals within the ANAIS experiment

NASA Astrophysics Data System (ADS)

Villar, P.; Amaré, J.; Cebrián, S.; Coarasa, I.; García, E.; Martínez, M.; Oliván, M. A.; Ortigoza, Y.; Ortiz de Solórzano, A.; Puimedón, J.; Sarsa, M. L.; Villar, J. A.

2018-03-01

The direct detection of galactic dark matter particles requires ultra-low background conditions. NaI(Tl) crystals are applied in the search for these dark matter particles through their interactions in the detector by measuring the scintillation signal produced. The production of long-lived isotopes in materials due to the exposure to cosmic rays on Earth’s surface can be an hazard for these ultra-low background demanding experiments, typically performed underground. Therefore, production rates of cosmogenic isotopes in all the materials present in the experimental set-up, as well as the corresponding cosmic rays exposure history, must be both well-known in order to assess the relevance of this effect in the achievable sensitivity of a given experiment. Here, analysis of the cosmogenic studies developed from the ANAIS experiment NaI(Tl) detectors are presented. Installed inside a convenient shielding at the Canfranc Underground Laboratory just after finishing surface exposure to cosmic rays and thanks to the prompt data taking developed, identification and quantification of isotopes with half-lives of the order of tens of days were allowed, and thanks to the long-term operation of the detectors long-lived isotopes have been also identified and quantified. Main results for the activation yields of iodine and tellurium isotopes, 22Na, 113Sn, 109Cd, and tritium are presented in this work, together with the estimate of the production rates for their activation by cosmic nucleons while on Earth’s surface based on a selection of excitation functions over the entire energy range of cosmic nucleons.

Propagation of Polarized Cosmic Microwave Background Radiation in an Anisotropic Magnetized Plasma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moskaliuk, S. S.

2010-01-01

The polarization plane of the cosmic microwave background radiation (CMBR) can be rotated either in a space-time with metric of anisotropic type and in a magnetized plasma or in the presence of a quintessential background with pseudoscalar coupling to electromagnetism. A unified treatment of these three phenomena is presented for cold anisotropic plasma at the pre-recombination epoch. It is argued that the generalized expressions derived in the present study may be relevant for direct searches of a possible rotation of the cosmic microwave background polarization.

Automotive Fuel Economy: A Technical Study and Curriculum Development Project. A Thesis Presented to the Faculty of the College of Education, Mankato State University.

ERIC Educational Resources Information Center

Ready, Kirk Lewis

Automotive fuel economy was the topic of a study during which technical and background information was gathered, curriculum materials were sought, and curricula were developed. Technical information came from written materials and actual mileage tests of selected factors. Background came from written materials, field trips, and building and…

ARC-1979-AC79-7090

NASA Image and Video Library

1979-07-10

P-21762 C This color picture of Ganymede in the region 30° S 180° W shows features as small as 6 kilometers (3.7 miles) across. Shown is a bright halo impact crater that shows the fresh material thrown out of the crater. In the background is bright grooved terrain that may be the result of shearing of the surface materials along fault planes. The dark background material is the ancient heavily cratered terrain--the oldest material preserved on the Ganymede surface.

Psychologists as Witnesses: Background and Good Practice in the Delivery of Evidence

ERIC Educational Resources Information Center

Ireland, Jane L.

2008-01-01

An outline of the background to the provision of psychological evidence within legal settings will be provided, with attention to formal and quasi-court settings (e.g., tribunals). Key points of relevance to psychologists and to educational psychologists in particular will be illustrated, including guidelines for defendable written and oral…

Shopping Centers: Their Development and Impact on a Community.

ERIC Educational Resources Information Center

Berezowski, P. E.; And Others

Presenting extensive background material on the development of shopping centers, this paper includes elementary and junior high school outdoor education activities centering upon shopping center studies. Background material includes analysis of the following: shopping center types (architecture, regional location, etc); land use (guidelines for…

Background Materials for Chairman's Workshop. 5th Edition.

ERIC Educational Resources Information Center

Kimble, Gregory A.

Information for newly appointed heads of graduate departments of psychology is presented as background material for the 1974 Chairman's Workshop. Topics include the following: the budgetary situation, pressures for increased teaching loads, effects upon recruiting faculty, faculty morale, graduate and undergraduate student morale, the intellectual…

Radon daughter plate-out onto Teflon

NASA Astrophysics Data System (ADS)

Morrison, E. S.; Frels, T.; Miller, E. H.; Schnee, R. W.; Street, J.

2018-01-01

Radiopure materials for detector components in rare event searches may be contaminated after manufacturing with long-lived 210Pb produced by the decay of atmospheric radon. Charged radon daughters deposited on the surface or implanted in the bulk of detector materials have the potential to cause noticeable backgrounds within dark matter regions of interest. Understanding the mechanics governing these background signals is therefore a paramount concern in dark matter experiments in order to distinguish a real signal from internal detector backgrounds. Teflon (i.e. PTFE) is a specific material of interest because it makes up the walls of the inner detector of many liquid noble detectors such as the LUX-ZEPLIN experiment. The rate of radon daughter plate-out onto Teflon can be orders of magnitude larger than the plate-out rate onto other materials. Mitigation of plate-out onto Teflon and steel by proximity to other materials is demonstrated.

Development of an underground HPGe array facility for ultra low radioactivity measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sala, E.; Kang, W. G.; Kim, Y. D.

Low Level Counting techniques using low background facilities are continuously under development to increase the possible sensitivity needed for rare physics events experiments. The CUP (Center for Underground Physics) group of IBS is developing, in collaboration with Canberra, a ultra low background instrument composed of two arrays facing each other with 7 HPGe detectors each. The low radioactive background of each detector has been evaluated and improved by the material selection of the detector components. Samples of all the building materials have been provided by the manufacturer and the contaminations had been measured using an optimized low background 100% HPGemore » with a dedicated shielding. The evaluation of the intrinsic background has been performed using MonteCarlo simulations and considering the contribution of each material with the measured contamination. To further reduce the background, the instrument will be placed in the new underground laboratory at YangYang exploiting the 700m mountain coverage and radon-free air supplying system. The array has been designed to perform various Ultra Low background measurements; the sensitivity we are expecting will allow not only low level measurements of Ra and Th contaminations in Copper or other usually pure materials, but also the search for rare decays. In particular some possible candidates and configurations to detect the 0νECEC (for example {sup 106}Cd and {sup 156}Dy) and rare β decays ({sup 96}Zr, {sup 180m}Ta , etc ) are under study.« less

A review of the characteristics of dietary fibers relevant to appetite and energy intake outcomes in human intervention trials.

PubMed

Poutanen, Kaisa S; Dussort, Pierre; Erkner, Alfrun; Fiszman, Susana; Karnik, Kavita; Kristensen, Mette; Marsaux, Cyril Fm; Miquel-Kergoat, Sophie; Pentikäinen, Saara P; Putz, Peter; Slavin, Joanne L; Steinert, Robert E; Mela, David J

2017-09-01

Background: Many intervention studies have tested the effect of dietary fibers (DFs) on appetite-related outcomes, with inconsistent results. However, DFs comprise a wide range of compounds with diverse properties, and the specific contribution of these to appetite control is not well characterized. Objective: The influence of specific DF characteristics [i.e., viscosity, gel-forming capacity, fermentability, or molecular weight (MW)] on appetite-related outcomes was assessed in healthy humans. Design: Controlled human intervention trials that tested the effects of well-characterized DFs on appetite ratings or energy intake were identified from a systematic search of literature. Studies were included only if they reported 1 ) DF name and origin and 2 ) data on viscosity, gelling properties, fermentability, or MW of the DF materials or DF-containing matrixes. Results: A high proportion of the potentially relevant literature was excluded because of lack of adequate DF characterization. In total, 49 articles that met these criteria were identified, which reported 90 comparisons of various DFs in foods, beverages, or supplements in acute or sustained-exposure trials. In 51 of the 90 comparisons, the DF-containing material of interest was efficacious for ≥1 appetite-related outcome. Reported differences in material viscosity, MW, or fermentability did not clearly correspond to differences in efficacy, whereas gel-forming DF sources were consistently efficacious (but with very few comparisons). Conclusions: The overall inconsistent relations of DF properties with respect to efficacy may reflect variation in measurement methodology, nature of the DF preparation and matrix, and study designs. Methods of DF characterization, incorporation, and study design are too inconsistent to allow generalized conclusions about the effects of DF properties on appetite and preclude the development of reliable, predictive, structure-function relations. Improved standards for characterization and reporting of DF sources and DF-containing materials are strongly recommended for future studies on the effects of DF on human physiology. This trial was registered at http://www.crd.york.ac.uk/PROSPERO as CRD42015015336. © 2017 American Society for Nutrition.

A Preliminary Validation of Attention, Relevance, Confidence and Satisfaction Model-Based Instructional Material Motivational Survey in a Computer-Based Tutorial Setting

ERIC Educational Resources Information Center

Huang, Wenhao; Huang, Wenyeh; Diefes-Dux, Heidi; Imbrie, Peter K.

2006-01-01

This paper describes a preliminary validation study of the Instructional Material Motivational Survey (IMMS) derived from the Attention, Relevance, Confidence and Satisfaction motivational design model. Previous studies related to the IMMS, however, suggest its practical application for motivational evaluation in various instructional settings…

Village Science: A Resource Handbook for Rural Alaskan Teachers.

ERIC Educational Resources Information Center

Dick, Alan

A resource handbook for rural Alaskan teachers covers village science, to make basic science concepts relevant to the physical environment in villages. Material is intended for use as filler for weeks that come up short on science materials, to provide stimulation for students who cannot see the relevance of science in their lives, and to help…

Accurate Monitoring Leads to Effective Control and Greater Learning of Patient Education Materials

ERIC Educational Resources Information Center

Rawson, Katherine A.; O'Neil, Rochelle; Dunlosky, John

2011-01-01

Effective management of chronic diseases (e.g., diabetes) can depend on the extent to which patients can learn and remember disease-relevant information. In two experiments, we explored a technique motivated by theories of self-regulated learning for improving people's learning of information relevant to managing a chronic disease. Materials were…

Optical pump-probe microscopy for biomedicine and art conservation

NASA Astrophysics Data System (ADS)

Fischer, Martin

2013-03-01

Nonlinear optical microscopy can provide contrast in highly heterogeneous media and a wide range of applications has emerged, primarily in biology, medicine, and materials science. Compared to linear microscopy methods, the localized nature of nonlinear interactions leads to high spatial resolution, optical sectioning, and larger possible imaging depth in scattering media. However, nonlinear contrast (other than fluorescence, harmonic generation or CARS) is generally difficult to measure because it is overwhelmed by the large background of detected illumination light. This background can be suppressed by using femtosecond pulse or pulse train shaping to encode nonlinear interactions in background-free regions of the frequency spectrum. We have developed this shaping technology to study novel intrinsic structural and molecular contrast in biological tissue, generally using less power than a laser pointer. For example we have recently been able to sensitively measure detailed transient absorption dynamics of melanin sub-types in a variety of skin lesions, showing clinically relevant differences of melanin type and distribution between cancerous and benign tissue.[1] Recently we have also applied this technology to paint samples and to historic artwork in order to provide detailed, depth-resolved pigment identification. Initial studies in different inorganic and organic pigments have shown a rich and pigment-specific nonlinear absorption signature.[2] Some pigments, for example lapis lazuli (natural ultramarine), even show marked differences in signal depending on its geographic origin and on age, demonstrating the potential of this technique to determine authenticity, provenance, technology of manufacture, or state of preservation of historic works of art.

Proposed chemical mechanismsManagement practices impacts soil nutrients and bacterial populations in backgrounding beef feedlot

USDA-ARS?s Scientific Manuscript database

Intensive beef backgrounding often accumulate manure born soil nutrients, microbes, and pharmaceuticals at different site locations. Unless properly managed, such waste materials can pollute surrounding soil and water sources. Soil sampling from these sites helps determining waste material levels bu...

WOW! The Wonders of Wetlands: An Educator's Guide. [Revised.

ERIC Educational Resources Information Center

Slattery, Britt Eckhardt; And Others

This educator's guide contains background material and stimulating activities pertaining to wetlands that classroom teachers, refuge managers, nature center interpreters, park service educators, and others will find useful. The first part, background material for teachers preparing wetland study units, is divided into six chapters: "Wetlands and…

Multispectral infrared target detection: phenomenology and modeling

NASA Astrophysics Data System (ADS)

Cederquist, Jack N.; Rogne, Timothy J.; Schwartz, Craig R.

1993-10-01

Many targets of interest provide only very small signature differences from the clutter background. The ability to detect these small difference targets should be improved by using data which is diverse in space, time, wavelength or some other observable. Target materials often differ from background materials in the variation of their reflectance or emittance with wavelength. A multispectral sensor is therefore considered as a means to improve detection of small signal targets. If this sensor operates in the thermal infrared, it will not need solar illumination and will be useful at night as well as during the day. An understanding of the phenomenology of the spectral properties of materials and an ability to model and simulate target and clutter signatures is needed to understand potential target detection performance from multispectral infrared sensor data. Spectral variations in material emittance are due to vibrational energy transitions in molecular bonds. The spectral emittances of many materials of interest have been measured. Examples are vegetation, soil, construction and road materials, and paints. A multispectral infrared signature model has been developed which includes target and background temperature and emissivity, sky, sun, cloud and background irradiance, multiple reflection effects, path radiance, and atmospheric attenuation. This model can be used to predict multispectral infrared signatures for small signal targets.

Evaluation of ultra-low background materials for uranium and thorium using ICP-MS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoppe, E. W.; Overman, N. R.; LaFerriere, B. D.

2013-08-08

An increasing number of physics experiments require low background materials for their construction. The presence of Uranium and Thorium and their progeny in these materials present a variety of unwanted background sources for these experiments. The sensitivity of the experiments continues to drive the necessary levels of detection ever lower as well. This requirement for greater sensitivity has rendered direct radioassay impractical in many cases requiring large quantities of material, frequently many kilograms, and prolonged counting times, often months. Other assay techniques have been employed such as Neutron Activation Analysis but this requires access to expensive facilities and instrumentation andmore » can be further complicated and delayed by the formation of unwanted radionuclides. Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is a useful tool and recent advancements have increased the sensitivity particularly in the elemental high mass range of U and Th. Unlike direct radioassay, ICP-MS is a destructive technique since it requires the sample to be in liquid form which is aspirated into a high temperature plasma. But it benefits in that it usually requires a very small sample, typically about a gram. This paper discusses how a variety of low background materials such as copper, polymers, and fused silica are made amenable to ICP-MS assay and how the arduous task of maintaining low backgrounds of U and Th is achieved.« less

Evaluation of Ultra-Low Background Materials for Uranium and Thorium Using ICP-MS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoppe, Eric W.; Overman, Nicole R.; LaFerriere, Brian D.

2013-08-08

An increasing number of physics experiments require low background materials for their construction. The presence of Uranium and Thorium and their progeny in these materials present a variety of unwanted background sources for these experiments. The sensitivity of the experiments continues to drive the necessary levels of detection ever lower as well. This requirement for greater sensitivity has rendered direct radioassay impractical in many cases requiring large quantities of material, frequently many kilograms, and prolonged counting times, often months. Other assay techniques have been employed such as Neutron Activation Analysis but this requires access to expensive facilities and instrumentation andmore » can be further complicated and delayed by the formation of unwanted radionuclides. Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is a useful tool and recent advancements have increased the sensitivity particularly in the elemental high mass range of U and Th. Unlike direct radioassay, ICP-MS is a destructive technique since it requires the sample to be in liquid form which is aspirated into a high temperature plasma. But it benefits in that it usually requires a very small sample, typically about a gram. Here we will discuss how a variety of low background materials such as copper, polymers, and fused silica are made amenable to ICP-MS assay and how the arduous task of maintaining low backgrounds of U and Th is achieved.« less

Evaluation of United States Department of Agriculture-sponsored consumer materials addressing food security.

PubMed

Tolma, Eleni; John, Robert; Garner, Jane

2007-01-01

Food insecurity in the United States is a major public health issue. The main objective of this study was to evaluate the availability and quality of printed materials addressing food security targeted to special populations by the United States Department of Agriculture (USDA). Nutrition education resources addressing food security available from USDA websites were selected for analysis. Not applicable. The review team consisted of project staff (n = 6), two of who were fluent in Spanish. Selection criteria were established to identify the food-security materials, and a group of reviewers assessed the quality of each publication both quantitatively and qualitatively. A consensus meeting among the reviewers was held to make final determinations of the quality of the materials. The quantitative data analysis consisted of basic descriptive statistics. Among the 27 materials initially identified, 20 were either irrelevant or of low relevance to food security. Moreover, very few of them were intended for minority populations. The quality of most of the materials ranged from "average" to "good." Some of the major weaknesses include readability level, lack of cultural relevance, and inadequate coverage of food insecurity. Very few materials on food insecurity are of high quality. In the development of such materials, emphasis should be given to the readability level, content, and cultural relevance.

Robin Hood Effects on Motivation in Math: Family Interest Moderates the Effects of Relevance Interventions

ERIC Educational Resources Information Center

Häfner, Isabelle; Flunger, Barbara; Dicke, Anna-Lena; Gaspard, Hanna; Brisson, Brigitte M.; Nagengast, Benjamin; Trautwein, Ulrich

2017-01-01

Using a cluster randomized field trial, the present study tested whether 2 relevance interventions affected students' value beliefs, self-concept, and effort in math differently depending on family background (socioeconomic status, family interest (FI), and parental utility value). Eighty-two classrooms were randomly assigned to either 1 of 2…

Polytechnic Engineering Mathematics: Assessing Its Relevance to the Productivity of Industries in Uganda

ERIC Educational Resources Information Center

Jehopio, Peter J.; Wesonga, Ronald

2017-01-01

Background: The main objective of the study was to examine the relevance of engineering mathematics to the emerging industries. The level of abstraction, the standard of rigor, and the depth of theoretical treatment are necessary skills expected of a graduate engineering technician to be derived from mathematical knowledge. The question of whether…

49 CFR 1570.13 - False statements regarding security background checks by public transportation agency or railroad...

Code of Federal Regulations, 2011 CFR

2011-10-01

..., national security, or of terrorism: (i) Relevant criminal history databases; (ii) In the case of an alien... databases to determine the status of the alien under the immigration laws of the United States; and (iii) Other relevant information or databases, as determined by the Secretary of Homeland Security. (c...

49 CFR 1570.13 - False statements regarding security background checks by public transportation agency or railroad...

Code of Federal Regulations, 2010 CFR

2010-10-01

..., national security, or of terrorism: (i) Relevant criminal history databases; (ii) In the case of an alien... databases to determine the status of the alien under the immigration laws of the United States; and (iii) Other relevant information or databases, as determined by the Secretary of Homeland Security. (c...

Perspectives of Employees with Intellectual Disabilities on Themes Relevant to Their Job Satisfaction. An Explorative Study Using Photovoice

ERIC Educational Resources Information Center

Akkerman, Alma; Janssen, Cees G. C.; Kef, Sabina; Meininger, Herman P.

2014-01-01

Background: This study explored the perspectives of people with intellectual disabilities on themes relevant to their job satisfaction in integrated and sheltered employment. Method: The photovoice method was used. Nine participants with moderate to mild intellectual disabilities, working in integrated and sheltered employment, took pictures of…

49 CFR 1570.13 - False statements regarding security background checks by public transportation agency or railroad...

Code of Federal Regulations, 2012 CFR

2012-10-01

..., national security, or of terrorism: (i) Relevant criminal history databases; (ii) In the case of an alien... databases to determine the status of the alien under the immigration laws of the United States; and (iii) Other relevant information or databases, as determined by the Secretary of Homeland Security. (c...

49 CFR 1570.13 - False statements regarding security background checks by public transportation agency or railroad...

Code of Federal Regulations, 2013 CFR

2013-10-01

..., national security, or of terrorism: (i) Relevant criminal history databases; (ii) In the case of an alien... databases to determine the status of the alien under the immigration laws of the United States; and (iii) Other relevant information or databases, as determined by the Secretary of Homeland Security. (c...

Classification-free threat detection based on material-science-informed clustering

NASA Astrophysics Data System (ADS)

Yuan, Siyang; Wolter, Scott D.; Greenberg, Joel A.

2017-05-01

X-ray diffraction (XRD) is well-known for yielding composition and structural information about a material. However, in some applications (such as threat detection in aviation security), the properties of a material are more relevant to the task than is a detailed material characterization. Furthermore, the requirement that one first identify a material before determining its class may be difficult or even impossible for a sufficiently large pool of potentially present materials. We therefore seek to learn relevant composition-structure-property relationships between materials to enable material-identification-free classification. We use an expert-informed, data-driven approach operating on a library of XRD spectra from a broad array of stream of commerce materials. We investigate unsupervised learning techniques in order to learn about naturally emergent groupings, and apply supervised learning techniques to determine how well XRD features can be used to separate user-specified classes in the presence of different types and degrees of signal degradation.

[On the Way to Culture-Sensitive Patient Information Materials: Results of a Focus Group Study].

PubMed

Ries, Zivile; Frank, Fabian; Bermejo, Isaac; Kalaitsidou, Chariklia; Zill, Jördis; Dirmaier, Jörg; Härter, Martin; Bengel, Jürgen; Hölzel, Lars

2018-06-01

This study was part of a double-blind randomised controlled trial aimed to evaluate the effects of culture-sensitive patient information materials (PIM) compared with standard translated material. The study aimed to obtain the data for the development of culture sensitive PIM about unipolar depression for the 4 largest migrant groups in Germany (Turkish, Polish, Russian and Italian migration background). A qualitative study using 4 manual-based focus groups (FG), one for each migrant group, with 29 participants (9 with a Turkish (TüG), 8 with a Polish (PoG), 5 with a Russian (RuG) and 7 with an Italian (ItG) migration background) was conducted. The discussions were recorded, transcribed and analyzed using qualitative content analysis. 7 categories were identified. For the (1.) development of a good culture-sensitive PIM an easy language, a clear structure, an assessable extent of information and the avoidance of stereotypes were highlighted cross-culturally in all four FG. RuG and PoG had the largest (2.) lack of information about the German health care system. Concerning the (3.) illness perception RuG named problems with recognizing and understanding depression. PoG, RuG and TüG thematized (4.) feared consequences of the illness and of professional helpseeking. ItG, PoG, RuG had fears concerning (5.) psychotropic drugs as a result from insufficient knowledge about medication. For (6.) doctor-patient relationship cultural specifics were identified in RuG and TüG and for (7.) migration or culture specific reasons for depression in RuG, ItG and TüG. Although the identified categories were relevant for all or for the majority of migrant groups, for most categories specific cultural aspects were discovered. These findings show the importance of a culture sensitive adaptation of PIM. © Georg Thieme Verlag KG Stuttgart · New York.

Molecular chirality: language, history, and significance.

PubMed

Gal, Joseph

2013-01-01

In this chapter some background material concerning molecular chirality and enantiomerism is presented. First some basic chemical-molecular aspects of chirality are reviewed, after which certain relevant terminology whose use in the literature has been problematic is discussed. Then an overview is provided of some of the early discoveries that laid the foundations of the science of molecular chirality in chemistry and biology, including the discovery of the phenomenon of molecular chirality by L. Pasteur, the proposals for the asymmetric carbon atom by J.H. van 't Hoff and J.A. Lebel, Pasteur's discovery of biological enantioselectivity, the discovery of enantioselectivity at biological receptors by A. Piutti, the studies of enzymatic stereoselectivity by E. Fischer, and the work on enantioselectivity in pharmacology by A. Cushny. Finally, the role of molecular chirality in pharmacotherapy and new-drug development, arguably one of the main driving forces for the current intense interest in the phenomenon of molecular chirality, is discussed.

[Indications for Retinal Laser Therapy Revisited].

PubMed

Enders, P; Schaub, F; Fauser, S

2017-02-10

Background Laser therapy is an important treatment option in retinal diseases, especially in cases of vascular involvement. Most approaches are based on coagulation of retinal structures. As there is increasing use of agents targetting vascular endothelial growth factor in the treatment of macular diseases, indications for the use of laser treatment need to be reviewed carefully, especially with respect to their significance in first line therapy. This article explains recent strategies and treatment protocols. Materials and Methods Review of current literature in PubMed as well as synopsis of relevant guidelines. Results and Conclusion Retinal laser therapy is still widely used within retinal opthalmology and covers a large spectrum of indications. Despite the success of medical approaches, retinal laser therapy remains an indispensable treatment option for proliferative diabetic retinopathy, central or peripheral vein occlusion and less frequent pathologies, such as retinopathy of prematurity or Coats's disease. Georg Thieme Verlag KG Stuttgart · New York.

Ophthalmic Pathology of Nance-Horan Syndrome: Case Report and Review of the Literature

PubMed Central

Ding, Xiaoyan; Patel, Mrinali; Herzlich, Alexandra A.; Sieving, Pamela C.; Chan, Chi-Chao

2009-01-01

Background Nance-Horan syndrome (NHS) is a rare X-linked disorder typified by dense congenital central cataracts, microcornea, anteverted and simplex pinnae, brachymetacarpalia, and numerous dental anomalies due in most cases to a mutation in the NHS gene. Material and Methods We present a case of clinical manifestation and ocular pathology in a patient with NHS. This article also reviews and discusses the relevant literature. Results Classic and novel ocular pathological findings of a young male with NHS are described, including congenital cataracts, infantile glaucoma, scleral staphyloma, and severe retinal cystoid degeneration. Conclusions We report a new pathological finding of severe retinal cystoid degeneration in this NHS patient and confirm abnormal development of the anterior chamber angle structure. These findings, coupled with our analysis of the available NHS literature, provide new understanding of the histopathological basis of ocular abnormalities and vision loss in NHS. PMID:19941417

Ultrafast and nonlinear surface-enhanced Raman spectroscopy.

PubMed

Gruenke, Natalie L; Cardinal, M Fernanda; McAnally, Michael O; Frontiera, Renee R; Schatz, George C; Van Duyne, Richard P

2016-04-21

Ultrafast surface-enhanced Raman spectroscopy (SERS) has the potential to study molecular dynamics near plasmonic surfaces to better understand plasmon-mediated chemical reactions such as plasmonically-enhanced photocatalytic or photovoltaic processes. This review discusses the combination of ultrafast Raman spectroscopic techniques with plasmonic substrates for high temporal resolution, high sensitivity, and high spatial resolution vibrational spectroscopy. First, we introduce background information relevant to ultrafast SERS: the mechanisms of surface enhancement in Raman scattering, the characterization of plasmonic materials with ultrafast techniques, and early complementary techniques to study molecule-plasmon interactions. We then discuss recent advances in surface-enhanced Raman spectroscopies with ultrafast pulses with a focus on the study of molecule-plasmon coupling and molecular dynamics with high sensitivity. We also highlight the challenges faced by this field by the potential damage caused by concentrated, highly energetic pulsed fields in plasmonic hotspots, and finally the potential for future ultrafast SERS studies.

Assessment of Chair-side Computer-Aided Design and Computer-Aided Manufacturing Restorations: A Review of the Literature

PubMed Central

Baroudi, Kusai; Ibraheem, Shukran Nasser

2015-01-01

Background: This paper aimed to evaluate the application of computer-aided design and computer-aided manufacturing (CAD-CAM) technology and the factors that affect the survival of restorations. Materials and Methods: A thorough literature search using PubMed, Medline, Embase, Science Direct, Wiley Online Library and Grey literature were performed from the year 2004 up to June 2014. Only relevant research was considered. Results: The use of chair-side CAD/CAM systems is promising in all dental branches in terms of minimizing time and effort made by dentists, technicians and patients for restoring and maintaining patient oral function and aesthetic, while providing high quality outcome. Conclusion: The way of producing and placing the restorations made with the chair-side CAD/CAM (CEREC and E4D) devices is better than restorations made by conventional laboratory procedures. PMID:25954082

Cultural standards, power and subversion in cross-cultural psychotherapy.

PubMed

Rechtman, Richard

2006-06-01

In a creolizing world, psychotherapy is challenged by the growing influence of cultural standards, systems of meaning and idioms of distress supported by new groups who play a major role in public health policies. While these elements were originally introduced in psychotherapy with ethnic minorities both to improve the patient-doctor relationship and to bring relevant material from patients' cultural background, they also became a way to empower nonwestern patients in western health care systems. When in the 1980s it became possible to readdress the issue of power in psychiatric practice, something had already changed in the social regulation that psychiatry should endorse. In this article, the author focuses on the new legitimated social and cultural values that underpin the therapeutic process. While obviously these new values should be taken into account, the aim for psychotherapy remains to find a path for a 'subversive' practice that could be something more than just following social guidelines.

Clinical features of olfactory disorders in patients seeking medical consultation

PubMed Central

Chen, Guowei; Wei, Yongxiang; Miao, Xutao; Li, Kunyan; Ren, Yuanyuan; Liu, Jia

2013-01-01

Background Olfactory disorders are common complaints in ENT clinics. We investigated causes and relevant features of olfactory disorders and the need for gustatory testing in patients with olfactory dysfunction. Material/Methods A total of 140 patients seeking medical consultations were enrolled. All patients were asked about their olfactory disorders in a structured interview of medical history and underwent thorough otolaryngologic examinations and imaging of the head. Results Causes of olfactory disorders were classified as: upper respiratory tract infection (URTI), sinonasal diseases (NSD), head trauma, idiopathic, endoscopic sinus surgery, congenital anosmia, and other causes. Each of the various causes of olfactory dysfunction had its own distinct clinical features. Nineteen of 54 patients whose gustation was assessed had gustatory disorders. Conclusions The leading causes of olfactory dysfunction were URTI, NSD, head trauma, and idiopathic causes. Gustatory disorders were fairly common in patients with olfactory dysfunction. High priority should be given to complaints of olfactory disorders. PMID:23748259

A mechanistic model for the superglue fuming of latent fingerprints.

PubMed

Czekanski, Patrick; Fasola, Michael; Allison, John

2006-11-01

The use of superglue vapors to detect latent fingerprints, known as superglue fuming, is a chemical process that has not been fully described. The role of the fingerprint material in the process, leading to formation of methyl cyanoacrylate polymer at the site of the fingerprint, remains to be established. Films of liquid alkanes respond similarly to actual fingerprints in the fuming experiment. Their responses depended on the hydrocarbon used, viscosity, and film thickness. Aspects such as film thickness appear to be relevant for actual fingerprints as well. A model was proposed in light of these observations. The model compares the process with gas chromatography, in which molecules partition between the gas phase and a stationary phase. Aspects such as accumulation of superglue monomers by partitioning into a thin film (or wax) are consistent with the preferential response of fingerprints on surfaces relative to the background.

Somatic hybridization of sexually incompatible petunias: Petunia parodii, Petunia parviflora.

PubMed

Power, J B; Berry, S F; Chapman, J V; Cocking, E C

1980-01-01

Somatic hybrid plants were regenerated following the fusion of leaf mesophyll protoplasts of P. parodii with those isolated from a nuclear-albino mutant of P. parviflora. Attempts at sexual hybridization of these two species repeatedly failed thus confirming their previously established cross-incompatibility. Selection of somatic hybrid plants was possible since protoplasts of P. parodii would not develop beyond the cell colony stage, whilst those of the somatic hybrid and albino P. parviflora produced calluses. Green somatic hybrid calluses were visible against a background of albino cells/calluses, and upon transfer to regeneration media gave rise to shoots. Shoots and the resultant flowering plants were confirmed as somatic hybrids based on their growth habit, floral pigmentation and morphology, leaf hair structure, chromosome number and Fraction 1 protein profiles. The relevance of such hybrid material for the development of new, and extensively modified cultivars, is discussed.

The Effects of a Working-Class Background on Community College Faculty: A Critical Ethnography

ERIC Educational Resources Information Center

Dole, Susan McLaughlin

2010-01-01

Fields of inquiry intent on making social class differences visible and relevant in higher education and society at large are newly developing. Researchers continue to identify significant obstacles to degree attainment and hence to social mobility for working-class and low income students. A college student's social class background can…

Understanding Latino Students' Schooling Experiences: The Relevance of Skin Color among Mexican and Puerto Rican High School Students

ERIC Educational Resources Information Center

Fergus, Edward

2009-01-01

Background/Context: For the last 40 years, researchers have posited competing theories regarding the relative influence of social class background and racial-group membership on the school experiences, academic performance, behavior, and motivation of ethnic minority students. The general purpose of these competing theories has been to explain why…

Toward Perovskite Solar Cell Commercialization: A Perspective and Research Roadmap Based on Interfacial Engineering.

PubMed

Rajagopal, Adharsh; Yao, Kai; Jen, Alex K-Y

2018-06-08

High-efficiency and low-cost perovskite solar cells (PVKSCs) are an ideal candidate for addressing the scalability challenge of solar-based renewable energy. The dynamically evolving research field of PVKSCs has made immense progress in solving inherent challenges and capitalizing on their unique structure-property-processing-performance traits. This review offers a unique outlook on the paths toward commercialization of PVKSCs from the interfacial engineering perspective, relevant to both specialists and nonspecialists in the field through a brief introduction of the background of the field, current state-of-the-art evolution, and future research prospects. The multifaceted role of interfaces in facilitating PVKSC development is explained. Beneficial impacts of diverse charge-transporting materials and interfacial modifications are summarized. In addition, the role of interfaces in improving efficiency and stability for all emerging areas of PVKSC design are also evaluated. The authors' integral contributions in this area are highlighted on all fronts. Finally, future research opportunities for interfacial material development and applications along with scalability-durability-sustainability considerations pivotal for facilitating laboratory to industry translation are presented. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Bone tissue engineering: state of the art and future trends.

PubMed

Salgado, António J; Coutinho, Olga P; Reis, Rui L

2004-08-09

Although several major progresses have been introduced in the field of bone regenerative medicine during the years, current therapies, such as bone grafts, still have many limitations. Moreover, and in spite of the fact that material science technology has resulted in clear improvements in the field of bone substitution medicine, no adequate bone substitute has been developed and hence large bone defects/injuries still represent a major challenge for orthopaedic and reconstructive surgeons. It is in this context that TE has been emerging as a valid approach to the current therapies for bone regeneration/substitution. In contrast to classic biomaterial approach, TE is based on the understanding of tissue formation and regeneration, and aims to induce new functional tissues, rather than just to implant new spare parts. The present review pretends to give an exhaustive overview on all components needed for making bone tissue engineering a successful therapy. It begins by giving the reader a brief background on bone biology, followed by an exhaustive description of all the relevant components on bone TE, going from materials to scaffolds and from cells to tissue engineering strategies, that will lead to "engineered" bone. Scaffolds processed by using a methodology based on extrusion with blowing agents.

Precisely controlled fabrication, manipulation and in-situ analysis of Cu based nanoparticles.

PubMed

Martínez, L; Lauwaet, K; Santoro, G; Sobrado, J M; Peláez, R J; Herrero, V J; Tanarro, I; Ellis, G J; Cernicharo, J; Joblin, C; Huttel, Y; Martín-Gago, J A

2018-05-08

The increasing demand for nanostructured materials is mainly motivated by their key role in a wide variety of technologically relevant fields such as biomedicine, green sustainable energy or catalysis. We have succeeded to scale-up a type of gas aggregation source, called a multiple ion cluster source, for the generation of complex, ultra-pure nanoparticles made of different materials. The high production rates achieved (tens of g/day) for this kind of gas aggregation sources, and the inherent ability to control the structure of the nanoparticles in a controlled environment, make this equipment appealing for industrial purposes, a highly coveted aspect since the introduction of this type of sources. Furthermore, our innovative UHV experimental station also includes in-flight manipulation and processing capabilities by annealing, acceleration, or interaction with background gases along with in-situ characterization of the clusters and nanoparticles fabricated. As an example to demonstrate some of the capabilities of this new equipment, herein we present the fabrication of copper nanoparticles and their processing, including the controlled oxidation (from Cu 0 to CuO through Cu 2 O, and their mixtures) at different stages in the machine.

E-learning for medical imaging specialists: introducing blended learning in a nuclear medicine specialist course

PubMed Central

Haslerud, Torjan; Tulipan, Andreas Julius; Gray, Robert M

2017-01-01

Background While e-learning has become an important tool in teaching medical students, the training of specialists in medical imaging is still dominated by lecture-based courses. Purpose To assess the potential of e-learning in specialist education in medical imaging. Material and Methods An existing lecture-based five-day course in Clinical Nuclear Medicine (NM) was enhanced by e-learning resources and activities, including practical exercises. An anonymized survey was conducted after participants had completed and passed the multiple choice electronic course examination. Results Twelve out of 15 course participants (80%) responded. Overall satisfaction with the new course format was high, but 25% of the respondents wanted more interactive elements such as discussions and practical exercises. The importance of lecture handouts and supplementary online material such as selected original articles and professional guidelines was affirmed by all the respondents (92% fully, 8% partially), while 75% fully and 25% partially agreed that the lectures had been interesting and relevant. Conclusion E-learning represents a hitherto unrealized potential in the education of medical specialists. It may expedite training of medical specialists while at the same time containing costs. PMID:28804642

Negotiating boundaries: Accessing donor gametes in India

PubMed Central

Widge, A.; Cleland, J.

2011-01-01

Background: This paper documents how couples and providers access donor materials for conception in the Indian context and perceptions about using them. The objective is to facilitate understanding of critical issues and relevant concerns. Methods: A postal survey was conducted with a sample of 6000 gynaecologists and in-depth interviews were conducted with 39 gynaecologists in four cities. Results: Donor gametes are relatively more acceptable than a few years ago, especially if confidentiality can be maintained, though lack of availability of donor materials is sometimes an impediment to infertility treatment. Donor sperms are usually accessed from in-house or commercial sperm banks, pathology laboratories, IVF centres, professional donors, relatives or friends. There is scepticism about screening procedures of sperm banks. Donor eggs are usually accessed from voluntary donors, friends, relatives, egg sharing programmes, donation from other patients, advertising and commercial donors. There are several concerns regarding informed consent for using donated gametes, using relatives and friends gametes, the unregulated use of gametes and embryos, record keeping and documentation, unethical and corrupt practices and commercialisation. Conclusion: These issues need to be addressed by patients, providers and regulatory authorities by providing information, counselling, ensuring informed consent, addressing exploitation and commercialisation, ensuring monitoring, proper documentation and transparency. PMID:24753849

Radial Profiles of Saturn’s Phoebe Ring

NASA Astrophysics Data System (ADS)

Tamayo, Daniel; Markham, Stephen; Hedman, Matthew M.; Burns, Joseph A.

2015-11-01

In 2009, the Spitzer observatory discovered a vast circumplanetary dust ring around Saturn, sourced by its swarm of irregular satellites. This material had been hypothesized to exist, in order to blanket Iapetus’ leading face and create its stark hemispherical dichotomy. Unfortunately, observations from near-Earth space cannot probe how far inward the Phoebe ring extends, as they are overwhelmed by scattered light from the planet. Additionally, to date, such measurements have only been achieved of thermal emission in the mid-infrared.By contrast, we present results from recent observations with the Cassini spacecraft (in orbit about Saturn) at optical wavelengths. Using a novel observational technique that exploits the moving shadow cast by Saturn, we mitigate the scattered light and background, and have been able to clearly extract the exceedingly faint Phoebe ring signal (line-of-sight optical depth of 10e-9, surface brightness of roughly 27 mag/arcsec^2).Our extracted albedos are consistent with dark material liberated from the irregular satellites. Additionally, we present reconstructed radial profiles over the broad range of distances from Saturn spanned by our observations. We also connect these results to theoretical models of the size-dependent dynamics of Phoebe ring dust grains under the action of the relevant perturbations.

PUMAS: Practical Uses of Math And Science

NASA Astrophysics Data System (ADS)

Kahn, R. A.

2009-12-01

For more than ten years, PUMAS has provided a forum for disseminating peer-reviewed examples of Practical Uses of Math And Science, aimed at helping pre-college teachers enrich their presentation of math and science topics. Contributors include scientists, engineers, and content experts from many disciplines. The innovative ideas in PUMAS examples tend to be treasures, containing the ‘sparks’ of understanding that comes only from having real-life experience with the material. Examples can be essays, anecdotes, problems, demonstrations, or activities, and can be written in any style that serves the material well. They are keyed to the National Standards and Benchmarks, which provide the critical connection to K-12 curriculum guidelines, and the peer-review process involves at least one scientist with a relevant background, and at least one teacher at an appropriate grade level. The PUMAS Web Site has recently been upgraded. It is now a NASA-wide facility, recognized by both the National Science Teachers Association (NSTA) and the National Council of Teachers of Mathematics (NCTM). This presentation will describe and illustrate the operation of PUMAS, will highlight a few of our many treasures, and will appeal to scientists interested in contributing meaningfully to pre-college education to consider submitting examples to PUMAS.

Causes of shortage and delay in material supply: a preliminary study

NASA Astrophysics Data System (ADS)

Rahman, M. M.; Yap, Y. H.; Ramli, N. R.; Dullah, M. A.; Shamsuddin, M. S. W.

2017-11-01

Shortage and delay in materials supply is argued to be one of the most important factors that lead to delay in construction project delivery globally. However, the relevant underlying reasons vary from country to country. As such, this paper summarises the outcomes of a study that targeted identifying causes of shortage and delay in materials supply in Brunei Darussalam. The study was conducted through fifteen semi-structured interviews of contractors and materials suppliers in Brunei. The study identified six causes of shortageof materials and nine causes of delay in materials supply in Brunei. The most importantcausefor shortage of materials relates to the origin or availability of construction materials. On the other hand, the most influential cause of delay in material supply was found to be poor materials procurement and inventory management system, which has other underlying reasons such as late identification of the type of materials needed. The observations are expected to help in formulating or reviewing relevant policies, in order to ensure on-time project delivery.

Materials Discovery | Photovoltaic Research | NREL

Science.gov Websites

and specialized analysis algorithms. The Center for Next Generation of Materials by Design (CNGMD) is , incorporating metastable materials into predictive design, and developing theory to guide materials synthesis design, accuracy and relevance, metastability, and synthesizability-to make computational materials

PEN as self-vetoing structural material

NASA Astrophysics Data System (ADS)

Majorovits, B.; Eck, S.; Fischer, F.; Gooch, C.; Hayward, C.; Kraetzschmar, T.; van der Kolk, N.; Muenstermann, D.; Schulz, O.; Simon, F.

2018-01-01

Polyethylene Naphtalate (PEN) is a mechanically very favorable polymer. Earlier it was found that thin foils made from PEN can have very high radio-purity compared to other commercially available foils. In fact, PEN is already in use for low background signal transmission applications (cables). Recently it has been realized that PEN also has favorable scintillating properties. In combination, this makes PEN a very promising candidate as a self-vetoing structural material in low background experiments. Components instrumented with light detectors could be built from PEN. This includes detector holders, detector containments, signal transmission links, etc. The current R&D towards qualification of PEN as a self-vetoing low background structural material is be presented.

Expected background in the LZ experiment

NASA Astrophysics Data System (ADS)

Kudryavtsev, Vitaly A.

2015-08-01

The LZ experiment, featuring a 7-tonne active liquid xenon target, is aimed at achieving unprecedented sensitivity to WIMPs with the background expected to be dominated by astrophysical neutrinos. To reach this goal, extensive simulations are carried out to accurately calculate the electron recoil and nuclear recoil rates in the detector. Both internal (from target material) and external (from detector components and surrounding environment) backgrounds are considered. A very efficient suppression of background rate is achieved with an outer liquid scintillator veto, liquid xenon skin and fiducialisation. Based on the current measurements of radioactivity of different materials, it is shown that LZ can achieve the reduction of a total background for a WIMP search down to about 2 events in 1000 live days for 5.6 tonne fiducial mass.

Evidence-based practice: extending the search to find material for the systematic review

PubMed Central

Helmer, Diane; Savoie, Isabelle; Green, Carolyn; Kazanjian, Arminée

2001-01-01

Background: Cochrane-style systematic reviews increasingly require the participation of librarians. Guidelines on the appropriate search strategy to use for systematic reviews have been proposed. However, research evidence supporting these recommendations is limited. Objective: This study investigates the effectiveness of various systematic search methods used to uncover randomized controlled trials (RCTs) for systematic reviews. Effectiveness is defined as the proportion of relevant material uncovered for the systematic review using extended systematic review search methods. The following extended systematic search methods are evaluated: searching subject-specific or specialized databases (including trial registries), hand searching, scanning reference lists, and communicating personally. Methods: Two systematic review projects were prospectively monitored regarding the method used to identify items as well as the type of items retrieved. The proportion of RCTs identified by each systematic search method was calculated. Results: The extended systematic search methods uncovered 29.2% of all items retrieved for the systematic reviews. The search of specialized databases was the most effective method, followed by scanning of reference lists, communicating personally, and hand searching. Although the number of items identified through hand searching was small, these unique items would otherwise have been missed. Conclusions: Extended systematic search methods are effective tools for uncovering material for the systematic review. The quality of the items uncovered has yet to be assessed and will be key in evaluating the value of the systematic search methods. PMID:11837256

Zirconia in dental implantology: A review

PubMed Central

Apratim, Abhishek; Eachempati, Prashanti; Krishnappa Salian, Kiran Kumar; Singh, Vijendra; Chhabra, Saurabh; Shah, Sanket

2015-01-01

Background: Titanium has been the most popular material of choice for dental implantology over the past few decades. Its properties have been found to be most suitable for the success of implant treatment. But recently, zirconia is slowly emerging as one of the materials which might replace the gold standard of dental implant, i.e., titanium. Materials and Methods: Literature was searched to retrieve information about zirconia dental implant and studies were critically analyzed. PubMed database was searched for information about zirconia dental implant regarding mechanical properties, osseointegration, surface roughness, biocompatibility, and soft tissue health around it. The literature search was limited to English language articles published from 1975 to 2015. Results: A total of 45 papers met the inclusion criteria for this review, among the relevant search in the database. Conclusion: Literature search showed that some of the properties of zirconia seem to be suitable for making it an ideal dental implant, such as biocompatibility, osseointegration, favourable soft tissue response and aesthetics due to light transmission and its color. At the same time, some studies also point out its drawbacks. It was also found that most of the studies on zirconia dental implants are short-term studies and there is a need for more long-term clinical trials to prove that zirconia is worth enough to replace titanium as a biomaterial in dental implantology. PMID:26236672

Development and testing of culturally sensitive patient information material for Turkish, Polish, Russian and Italian migrants with depression or chronic low back pain (KULTINFO): study protocol for a double-blind randomized controlled trial.

PubMed

Hölzel, Lars P; Ries, Zivile; Zill, Jördis M; Kriston, Levente; Dirmaier, Jörg; Härter, Martin; Bermejo, Isaac

2014-07-04

Many of the approximately 15 million people with a migration background living in Germany (19% of the population) are inadequately reached by existing healthcare provision. In the literature, the necessity for cultural adaptation of information material for patients with a migration background is often cited as a measure for improving healthcare.In this study, culturally sensitive information material will be developed and evaluated for patients with a migration background and depression or chronic low back pain. In this respect, it will be examined whether culturally sensitive information material is judged as more useful by the patients than standard translated patient information without cultural adaptation. The implementation and evaluation of culturally sensitive patient information material will occur in the framework of a double-blind randomized controlled parallel-group study in four study centres in Germany. Primary care patients with a Turkish, Polish, Russian or Italian migration background with a diagnosis of depressive disorder or chronic low back pain will be included and randomly allocated to the intervention group or the control group. In the intervention group, culturally sensitive patient information will be handed to the patient at the end of the physician consultation, while in the control group, standard translated patient information material will be provided. The patients will be surveyed by means of questionnaires following the consultation as well as after 8 weeks and 6 months. In addition to the primary outcome (subjective usefulness), several patient- and physician-rated secondary outcomes will be considered. The study will provide an empirical answer to the question of whether persons with a migration background perceive culturally sensitive patient information material as more useful than translated information material without cultural adaptation. Deutsches Register Klinischer Studien (DRKS-ID) DRKS00004241 and Universal Trial Number (UTN) U1111-1135-8043.

Systematic Review and Meta-Analysis of Interventions Relevant for Young Offenders with Mood Disorders, Anxiety Disorders, or Self-Harm

ERIC Educational Resources Information Center

Townsend, Ellen; Walker, Dawn-Marie; Sargeant, Sally; Vostanis, Panos; Hawton, Keith; Stocker, Olivia; Sithole, Jabulani

2010-01-01

Background: Mood and anxiety disorders, and problems with self-harm are significant and serious issues that are common in young people in the Criminal Justice System. Aims: To examine whether interventions relevant to young offenders with mood or anxiety disorders, or problems with self-harm are effective. Method: Systematic review and…

The Road to Culturally Relevant Pedagogy: Expatriate Teachers' Pedagogical Practices in the Cultural Context of Saudi Arabian Higher Education

ERIC Educational Resources Information Center

Hamdan, Amani K.

2014-01-01

This case study explored the need for culturally relevant pedagogy (CRP) in Saudi Arabian higher education, especially when students have a cultural background that differs from that of their instructor. The study documented how expatriate teachers structured their pedagogical practices in the Saudi Arabian context. It examined how these…

Ghana. Part One-Class Materials. Development Studies No. 1, Third Impression.

ERIC Educational Resources Information Center

Jones, Paula; Bourne, Fay

Background readings and classroom materials dealing with Ghana for use with secondary and college students are provided in this publication. The major historical, social, geographical, and political aspects which have contributed to the present day development of Ghana are examined. The background readings for teachers which comprise section one…

Unity in Diversity: History and Religion in Indonesia.

ERIC Educational Resources Information Center

Jones, Bruce William

This paper, intended as lecture material for university students or as background material for teachers of social studies and world history, assumes that students already have some knowledge about the origins, practices, and beliefs of Islam, but that they have no prior background about Indonesia or its history. The paper describes the diversity…

Report to the State Department of Education Task Force on Migrant Education.

ERIC Educational Resources Information Center

Rollason, Wendell N.

The report presents Redlands Christian Migrant Association's (RCMA's) position on Florida's Migrant Education Program, the program changes sought by RCMA, and background and back-up materials. The packet of materials includes brief discussions of the background and reactivation of the Task Force on Migrant Education; State Board of Education…

Clinical Decision Support Tools for Osteoporosis Disease Management: A Systematic Review of Randomized Controlled Trials

PubMed Central

Straus, Sharon E.

2008-01-01

BACKGROUND Studies indicate a gap between evidence and clinical practice in osteoporosis management. Tools that facilitate clinical decision making at the point of care are promising strategies for closing these practice gaps. OBJECTIVE To systematically review the literature to identify and describe the effectiveness of tools that support clinical decision making in osteoporosis disease management. DATA SOURCES Medline, EMBASE, CINAHL, and EBM Reviews (CDSR, DARE, CCTR, and ACP J Club), and contact with experts in the field. REVIEW METHODS Randomized controlled trials (RCTs) in any language from 1966 to July 2006 investigating disease management interventions in patients at risk for osteoporosis. Outcomes included fractures and bone mineral density (BMD) testing. Two investigators independently assessed articles for relevance and study quality, and extracted data using standardized forms. RESULTS Of 1,246 citations that were screened for relevance, 13 RCTs met the inclusion criteria. Reported study quality was generally poor. Meta-analysis was not done because of methodological and clinical heterogeneity; 77% of studies included a reminder or education as a component of their intervention. Three studies of reminders plus education targeted to physicians and patients showed increased BMD testing (RR range 1.43 to 8.67) and osteoporosis medication use (RR range 1.60 to 8.67). A physician reminder plus a patient risk assessment strategy found reduced fractures [RR 0.58, 95% confidence interval (CI) 0.37 to 0.90] and increased osteoporosis therapy (RR 2.44, CI 1.43 to 4.17). CONCLUSION Multi-component tools that are targeted to physicians and patients may be effective for supporting clinical decision making in osteoporosis disease management. Electronic supplementary material The online version of this article (doi:10.1007/s11606-008-0812-9) contains supplementary material, which is available to authorized users. PMID:18836782

Magnetic Modeling of a Rotating Flux Concentrator System Designed to Mitigate Noise in Large Magnetic Sensors

DTIC Science & Technology

2010-09-01

region were defined as a background. The flux concentrators were drawn as solid pieces and assigned the material properties of permalloy ( NiFe ), with...assigning properties (coercivity, permeability, etc.) to the objects, assigning boundaries or sources, seeding the objects and creating a mesh, and then...a permeability of 5000 as that is a value readily achieved in this material. The material properties assigned to this background are those of a

Foreign Trip Report MATGEN-IV Sep 24- Oct 26, 2007

DOE Office of Scientific and Technical Information (OSTI.GOV)

de Caro, M S

2007-10-30

Gen-IV activities in France, Japan and US focus on the development of new structural materials for Gen-IV nuclear reactors. Oxide dispersion strengthened (ODS) F/M steels have raised considerable interest in nuclear applications. Promising collaborations can be established seeking fundamental knowledge of relevant Gen-IV ODS steel properties (see attached travel report on MATGEN- IV 'Materials for Generation IV Nuclear Reactors'). Major highlights refer to results on future Ferritic/Martensitic steel cladding candidates (relevant to Gen-IV materials properties for LFR Materials Program) and on thermodynamic and mechanic behavior of metallic FeCr binary alloys, base matrix for future candidate steels (for the LLNL-LDRD projectmore » on Critical Issues on Materials for Gen-IV Reactors).« less

LLNL compiled first pages ordered by ascending B&R code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, G; Kumar, M; Tobin, J

We aim to develop a fundamental understanding of materials dynamics (from {micro}s to ns) in systems where the required combination of spatial and temporal resolution can only be reached by the dynamic transmission electron microscope (DTEM). In this regime, the DTEM is capable of studying complex transient phenomena with several orders of magnitude time resolution advantage over any existing in-situ TEM. Using the unique in situ capabilities and the nanosecond time resolution of the DTEM, we seek to study complex transient phenomena associated with rapid processes in materials, such as active sites on nanoscale catalysts and the atomic level mechanismsmore » and microstructural features for nucleation and growth associated with phase transformations in materials, specifically in martensite formation and crystallization reactions from the amorphous phase. We also will study the transient phase evolution in rapid solid-state reactions, such as those occurring in reactive multilayer foils (RMLF). Program Impact: The LLNL DTEM possesses unique capabilities for capturing time resolved images and diffraction patterns of rapidly evolving materials microstructure under strongly driven conditions. No other instrument in the world can capture images with <10 nm spatial resolution of interesting irreversible materials processes such as phase transformations, plasticity, or morphology changes with 15 ns time resolution. The development of this innovative capability requires the continuing collaboration of laser scientists, electron microscopists, and materials scientists experienced in time resolved observations of materials that exist with particularly relevant backgrounds at LLNL. The research team has made observations of materials processes that are possible by no other method, such as the rapid crystallization of thin film NiTi that identified a change in mechanism at high heating rates as compared to isothermal anneals through changes in nucleation and growth rates of the crystalline phase. The project is designed to reveal these fundamental processes and mechanisms in rapid microstructure evolution that form the foundation of understanding that is an integral part of the DOE-BES mission.« less

Use of UV Sources for Detection and Identification of Explosives

NASA Technical Reports Server (NTRS)

Hug, William; Reid, Ray; Bhartia, Rohit; Lane, Arthur

2009-01-01

Measurement of Raman and native fluorescence emission using ultraviolet (UV) sources (<400 nm) on targeted materials is suitable for both sensitive detection and accurate identification of explosive materials. When the UV emission data are analyzed using a combination of Principal Component Analysis (PCA) and cluster analysis, chemicals and biological samples can be differentiated based on the geometric arrangement of molecules, the number of repeating aromatic rings, associated functional groups (nitrogen, sulfur, hydroxyl, and methyl), microbial life cycles (spores vs. vegetative cells), and the number of conjugated bonds. Explosive materials can be separated from one another as well as from a range of possible background materials, which includes microbes, car doors, motor oil, and fingerprints on car doors, etc. Many explosives are comprised of similar atomic constituents found in potential background samples such as fingerprint oils/skin, motor oil, and soil. This technique is sensitive to chemical bonds between the elements that lead to the discriminating separability between backgrounds and explosive materials.

Particle radiation near the orbit of the Vacuum Wake Shield

NASA Technical Reports Server (NTRS)

Bering, Edgar A., III; Ignatiev, Alex

1990-01-01

The particle populations that are expected to inflict the most damage on thin film materials grown on the vacuum Wake Shield Facility (WSF) are ions and energetic neutral atoms with energies in the range of 100 eV to 20 keV. The production of films that have an order of magnitude fewer defects than are now available requires that the 1-keV particle flux be kept lower than 1000 particles/(sq cm s sr keV) (assuming a reasonable spectral shape). WSF will be flown on orbits with an inclination of 28 deg at altitudes of 300-700 km. Because of the background counting rate produced by the about 100 MeV trapped protons in the inner belt, obtaining accurate measurements of the particles of interest is very difficult. The quiet-time background fluxes of the relevant particles are not presently known. At times of magnetic activity, fluxes of 0.1-17 keV O(+) ions as great as 10 million ions/(sq cm s sr keV) have been observed flowing out of the ionosphere at these latitudes. It appears that instrumentation for detailed assessment is essential for the proof-of-concept flight(s) and that real-time monitoring of low-energy ion and energetic neutral radiation will be required for the production flights.

Application of stochastic models in identification and apportionment of heavy metal pollution sources in the surface soils of a large-scale region.

PubMed

Hu, Yuanan; Cheng, Hefa

2013-04-16

As heavy metals occur naturally in soils at measurable concentrations and their natural background contents have significant spatial variations, identification and apportionment of heavy metal pollution sources across large-scale regions is a challenging task. Stochastic models, including the recently developed conditional inference tree (CIT) and the finite mixture distribution model (FMDM), were applied to identify the sources of heavy metals found in the surface soils of the Pearl River Delta, China, and to apportion the contributions from natural background and human activities. Regression trees were successfully developed for the concentrations of Cd, Cu, Zn, Pb, Cr, Ni, As, and Hg in 227 soil samples from a region of over 7.2 × 10(4) km(2) based on seven specific predictors relevant to the source and behavior of heavy metals: land use, soil type, soil organic carbon content, population density, gross domestic product per capita, and the lengths and classes of the roads surrounding the sampling sites. The CIT and FMDM results consistently indicate that Cd, Zn, Cu, Pb, and Cr in the surface soils of the PRD were contributed largely by anthropogenic sources, whereas As, Ni, and Hg in the surface soils mostly originated from the soil parent materials.

Non-contact Measurement of Creep in Ultra-High-Temperature Materials

DTIC Science & Technology

2009-11-04

Task 1: Process UHTC materials at the relevant temperatures in Electrostatic Levitation for extended periods. 5 3.5 Task 2: Prepare the required high...Electrostatic Levitation ITI Industrial Tectonics, Inc. MSFC NASA George C. Marshall Space Flight Center NASA National Aeronautics and Space...was divided into certain research questions: Can high-precision UHTC spheres be processed in Electrostatic Levitation (ESL) at the relevant

Sociopolitical Change and Inequality of Educational Opportunities: Influences of Family Background and Institutional Factors on the Acquisition of Education (1940-2001)

ERIC Educational Resources Information Center

Chunling, Li

2012-01-01

This article analyzes the influences of family background and institutional factors on the acquisition of education (1940-2001) and demonstrates that the increase or decrease in the inequality of educational opportunity allocations are closely linked to the government's relevant policies. The rapid growth of the inequality in educational…

Using Foreign Virtual Patients With Medical Students in Germany: Are Cultural Differences Evident and Do They Impede Learning?

PubMed

Walldorf, Jens; Jähnert, Tina; Berman, Norman B; Fischer, Martin R

2016-09-27

Learning with virtual patients (VPs) is considered useful in medical education for fostering clinical reasoning. As the authoring of VPs is highly demanding, an international exchange of cases might be desirable. However, cultural differences in foreign VPs might hamper learning success. We investigated the need for support for using VPs from the United States at a German university, with respect to language and cultural differences. Our goal was to better understand potential implementation barriers of a intercultural VP exchange. Two VPs were presented to 30 German medical students featuring a cultural background different from German standards with respect to diagnostic and therapeutic procedures, ethical aspects, role models, and language (as identified by a cultural adaptation framework). Participants were assigned to two groups: 14 students were advised to complete the cases without further instructions (basic group), and 16 students received written explanatory supplemental information specifically with regard to cultural differences (supplement group). Using a 6-point scale (6=strongly agree), we analyzed the results of an integrated assessment of learning success as well as an evaluation of cases by the students on usefulness for learning and potential issues regarding the language and cultural background. The German students found it motivating to work with cases written in English (6-point scale, 4.5 points). The clinical relevance of the VPs was clearly recognized (6 points), and the foreign language was considered a minor problem in this context (3 points). The results of the integrated learning assessment were similar in both groups (basic 53% [SD 4] vs supplement 52% [SD 4] correct answers, P=.32). However, students using the supplemental material more readily realized culturally different diagnostic and therapeutic strategies (basic 4 vs supplement 5 points, P=.39) and were less affirmative when asked about the transferability of cases to a German context (basic 5 vs supplement 3 points, P=.048). German students found English VPs to be highly clinically relevant, and they rated language problems much lower than they rated motivation to work on cases in English. This should encourage the intercultural exchange of VPs. The provision of supplemental explanatory material facilitates the recognition of cultural differences and might help prevent unexpected learning effects.

Plasma Inter-Particle and Particle-Wall Interactions

NASA Astrophysics Data System (ADS)

Patino, Marlene Idy

An improved understanding of plasma inter-particle and particle-wall interactions is critical to the advancement of plasma devices used for space electric propulsion, fusion, high-power communications, and next-generation energy systems. Two interactions of particular importance are (1) ion-atom collisions in the plasma bulk and (2) secondary electron emission from plasma-facing materials. For ion-atom collisions, interactions between fast ions and slow atoms are commonly dominated by charge-exchange and momentum-exchange collisions that are important to understanding the performance and behavior of many plasma devices. To investigate this behavior, this work developed a simple, well-characterized experiment that accurately measures the effects of high energy xenon ions incident on a background of xenon neutral atoms. By comparing these results to both analytical and computational models of ion-atom interactions, we discovered the importance of (1) accurately treating the differential cross-sections for momentum-exchange and charge-exchange collisions over all neutral background pressures, and (2) commonly overlooked interactions, including ion-induced electron emission and neutral-neutral ionization collisions, at high pressures. Data provide vital information on the angular scattering distributions of charge-exchange and momentum-exchange ions at 1.5 keV relevant for ion thrusters, and serve as canonical data for validation of plasma models. This work also investigates electron-induced secondary electron emission behavior relevant to materials commonly considered for plasma thrusters, fusion systems, and many other plasma devices. For such applications, secondary electron emission can alter the sheath potential, which can significantly affect device performance and life. Secondary electron emission properties were measured for materials that are critical to the efficient operation of many plasma devices, including: graphite (for tokamaks, ion thrusters, and traveling wave tubes), lithium (for tokamak walls), tungsten (the most promising material for future tokamaks such as ITER), and nickel (for plasma-enhanced chemistry). Measurements were made for incident electron energies up to 1.5 keV and angles between 0 and 78°. The most significant results from these measurements are as follows: (1) first-ever measurements of naturally-forming tungsten fuzz show a more than 40% reduction in secondary electron emission and an independence on incidence angle; (2) original measurements of lithium oxide show a 2x and 6x increase in secondary electron emission for 17% and 100% oxidation; and (3) unique measurements of Ni(110) single crystal show extrema in secondary electron emission when incidence angle is varied and an up to 36% increase at 0° over polycrystalline nickel. Each of these results are important discoveries for improving plasma devices. For example, from (1), the growth of tungsten fuzz in tokamaks is desirable for minimizing adverse secondary electron emission effects. From (2), the opposite is true for tokamaks with lithium coatings which are oxidized by typical residual gases. From (3), secondary electron emission from Ni(110) catalysts in plasma-enhanced chemistry may facilitate further reactions.

Optical Design Considerations for Efficient Light Collection from Liquid Scintillation Counters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernacki, Bruce E.; Douglas, Matthew; Erchinger, Jennifer L.

2015-01-01

Liquid scintillation counters measure charged particle-emitting radioactive isotopes and are used for environmental studies, nuclear chemistry, and life science. Alpha and beta emissions arising from the material under study interact with the scintillation cocktail to produce light. The prototypical liquid scintillation counter employs low-level photon-counting detectors to measure the arrival of the scintillation light produced as a result of the dissolved material under study interacting with the scintillation cocktail. For reliable operation the counting instrument must convey the scintillation light to the detectors efficiently and predictably. Current best practices employ the use of two or more detectors for coincidence processingmore » to discriminate true scintillation events from background events due to instrumental effects such as photomultiplier tube dark rates, tube flashing, or other light emission not generated in the scintillation cocktail vial. In low background liquid scintillation counters additional attention is paid to shielding the scintillation cocktail from naturally occurring radioactive material (NORM) present in the laboratory and within the instruments construction materials. Low background design is generally at odds with optimal light collection. This study presents the evolution of a light collection design for liquid scintillation counting in a low background shield. The basic approach to achieve both good light collection and a low background measurement is described. The baseline signals arising from the scintillation vial are modeled and methods to efficiently collect scintillation light are presented as part of the development of a customized low-background, high sensitivity liquid scintillation counting system.« less

Mitigation of ^{42}Ar/^{42}K background for the GERDA Phase II experiment

NASA Astrophysics Data System (ADS)

Lubashevskiy, A.; Agostini, M.; Budjáš, D.; Gangapshev, A.; Gusev, K.; Heisel, M.; Klimenko, A.; Lazzaro, A.; Lehnert, B.; Pelczar, K.; Schönert, S.; Smolnikov, A.; Walter, M.; Zuzel, G.

2018-01-01

Background coming from the ^{42}Ar decay chain is considered to be one of the most relevant for the Gerda experiment, which searches for the neutrinoless double beta decay of ^{76}Ge. The sensitivity strongly relies on the absence of background around the Q-value of the decay. Background coming from ^{42}K, a progeny of ^{42}Ar, can contribute to that background via electrons from the continuous spectrum with an endpoint at 3.5 MeV. Research and development on the suppression methods targeting this source of background were performed at the low-background test facility LArGe . It was demonstrated that by reducing ^{42}K ion collection on the surfaces of the broad energy germanium detectors in combination with pulse shape discrimination techniques and an argon scintillation veto, it is possible to suppress ^{42}K background by three orders of magnitude. This is sufficient for Phase II of the Gerda experiment.

Functionality based detection of airborne engineered nanoparticles in quasi real time: a new type of detector and a new metric.

PubMed

Neubauer, Nicole; Seipenbusch, Martin; Kasper, Gerhard

2013-08-01

A new type of detector which we call the Catalytic Activity Aerosol Monitor (CAAM) was investigated towards its capability to detect traces of commonly used industrial catalysts in ambient air in quasi real time. Its metric is defined as the catalytic activity concentration (CAC) expressed per volume of sampled workplace air. We thus propose a new metric which expresses the presence of nanoparticles in terms of their functionality - in this case a functionality of potential relevance for damaging effects - rather than their number, surface, or mass concentration in workplace air. The CAAM samples a few micrograms of known or anticipated airborne catalyst material onto a filter first and then initiates a chemical reaction which is specific to that catalyst. The concentration of specific gases is recorded using an IR sensor, thereby giving the desired catalytic activity. Due to a miniaturization effort, the laboratory prototype is compact and portable. Sensitivity and linearity of the CAAM response were investigated with catalytically active palladium and nickel nano-aerosols of known mass concentration and precisely adjustable primary particle size in the range of 3-30 nm. With the miniature IR sensor, the smallest detectable particle mass was found to be in the range of a few micrograms, giving estimated sampling times on the order of minutes for workplace aerosol concentrations typically reported in the literature. Tests were also performed in the presence of inert background aerosols of SiO2, TiO2, and Al2O3. It was found that the active material is detectable via its catalytic activity even when the particles are attached to a non-active background aerosol.

Thermally and chemically responsive nanoporous materials for efficient capture of fission product gases.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stroeve, Pieter; Faller, Roland

The objective of this project was to develop robust, high-efficiency materials for capture of fission product gases such as He, Xe and Kr in scenarios relevant for both reactor fuels and reprocessing operations. The relevant environments are extremely harsh, encompassing temperatures up to 1500 °C, high levels of radiation, as well as potential exposures to highly-reactive chemicals such as nitric acid and organic solvents such as kerosene. The requirement for nanostructured capture materials is driven in part by the very short (few micron) diffusion distances for product gases in nuclear fuel. We achieved synthesis, characterization and detailed modeling of themore » materials. Although not all materials reviewed in this report will be feasible for the ultimate goal of integration in nuclear fuel, nevertheless each material studied has particular properties which will enable an optimized material to be efficiently developed and characterized.« less

Fluorescence emission spectral measurements for the detection of oil on shore

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balick, L.K.; Di Benedetto, J.A.; Lutz, S.S.

1997-06-01

The US DOE Special Technologies Laboratory is developing an airborne Laser-Induced Fluorescence Imaging (LIFI) system to support environmental management of government Utilities. This system, or a system to be derived from it, is being evaluated for its potential to detect spilled oils on shore, in wetlands, and on ice. To more fully understand the detectivity of oil spills, emphasis has been placed on the spectral contrast between the oil signatures and signatures associated with the natural backgrounds (sand, vegetation, etc.). To support this evaluation, two series of controlled measurements have been performed to provide rigorous characterization of the excitation-emission propertiesmore » of some oils and background materials, and to look at the effects of weathering of oil on terrestrial background materials. Oil targets included a heavy crude oil, diesel, kerosene, and aviation fuel and backgrounds included beach sand, straw, mud, tar and kelp. Fluorescence of oil on background materials decreases rapidly over the first few days of exposure to the environment and is more rapid than for neat oil samples.« less

Fluorescence emission spectral measurements for the detection of oil on shore

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balick, L.K.; Di Benedetto, J.A.; Lutz, S.S.

1996-12-31

The U.S. DOE Special Technologies Laboratory is developing an airborne Laser-Induced Fluorescence Imaging (LIFI) system to support environmental management of government facilities. This system, or a system to be derived from it, is being evaluated for its potential to detect spilled oils oN shore, in wetlands, and on ice. To more fully understand the detectivity of oil spills, emphasis has been placed on the spectral contrast between the oil signatures and signatures associated with the natural backgrounds (sand, vegetation, etc.). To support this evaluation, two series of controlled measurements have been performed to provide rigorous characterization of the excitation-emission propertiesmore » of some oils and background materials, and to look at the effects of weathering of oil on terrestrial background materials. Oil targets included a heavy crude oil, diesel, kerosene, and aviation fuel and backgrounds included beach sand, straw, mud, tar and kelp. Fluorescence of oil on background materials decreases rapidly over the first few days of exposure to the environment and is more rapid than for neat oil samples.« less

Nest covering in plovers: How modifying the visual environment influences egg camouflage.

PubMed

Troscianko, Jolyon; Wilson-Aggarwal, Jared; Spottiswoode, Claire N; Stevens, Martin

2016-10-01

Camouflage is one of the most widespread antipredator defences, and its mechanistic basis has attracted considerable interest in recent years. The effectiveness of camouflage depends on the interaction between an animal's appearance and its background. Concealment can therefore be improved by changes to an animal's own appearance, by behaviorally selecting an optimal background, or by modifying the background to better match the animal's own appearance. Research to date has largely focussed on the first of these mechanisms, whereas there has been little work on the second and almost none on the third. Even though a number of animal species may potentially modify their environment to improve individual-specific camouflage, this has rarely if ever been quantitatively investigated, or its adaptive value tested. Kittlitz's plovers (Charadrius pecuarius) use material (stones and vegetation) to cover their nests when predators approach, providing concealment that is independent of the inflexible appearance of the adult or eggs, and that can be adjusted to suit the local surrounding background. We used digital imaging and predator vision modeling to investigate the camouflage properties of covered nests, and whether their camouflage affected their survival. The plovers' nest-covering materials were consistent with a trade-off between selecting materials that matched the color of the eggs, while resulting in poorer nest pattern and contrast matching to the nest surroundings. Alternatively, the systematic use of materials with high-contrast and small-pattern grain sizes could reflect a deliberate disruptive coloration strategy, whereby high-contrast material breaks up the telltale outline of the clutch. No camouflage variables predicted nest survival. Our study highlights the potential for camouflage to be enhanced by background modification. This provides a flexible system for modifying an animal's conspicuousness, to which the main limitation may be the available materials rather than the animal's appearance.

Materials in Manufacturing and Packaging Systems as Sources of Elemental Impurities in Packaged Drug Products: A Literature Review.

PubMed

Jenke, Dennis R; Stults, Cheryl L M; Paskiet, Diane M; Ball, Douglas J; Nagao, Lee M

Elemental impurities in drug products can arise from a number of different sources and via a number of different means, including the active pharmaceutical ingredient, excipients, the vehicle, and leaching of elemental entities that are present in the drug product's manufacturing or packaging systems. Thus, knowledge about the presence, level, and likelihood of leaching of elemental entities in manufacturing and packaging systems is relevant to understanding how these systems contribute to a drug product's total elemental impurity burden. To that end, a joint team from the Extractables and Leachables Safety Information Exchange (ELSIE) Consortium and the International Pharmaceutical Aerosol Consortium on Regulation and Science (IPAC-RS) has conducted a review of the available literature on elemental entities in pharmaceutically relevant polymers and the presence of these elemental entities in material extracts and/or drug products. This review article contains the information compiled from the available body of literature and considers two questions: (1) What elemental entities are present in the relevant polymers and materials and at what levels are they present? (2) To what extent are these elemental entities leached from these materials under conditions relevant to the manufacturing and storage/distribution of solution drug products? Conclusions drawn from the compiled data are as follows: (1) Elemental entities are present in the materials used to construct packaging and manufacturing systems as these materials either contain these elemental entities as additives or are exposed to elemental entities during their production. (2) Unless the elemental entities are parts of the materials themselves (for example, SiO 2 in glass) or intentionally added to the materials (for example, metal stearates in polymers), their incidental amounts in the materials are generally low. (3) When elemental entities are present in materials and systems, generally only a very small fraction of the total available amount of the entity can be leached under conditions that are relevant to packaged drug products. Thus, while sources of certain elemental impurities may be ubiquitous in the natural environment, they are not ubiquitous in materials used in pharmaceutical packaging and manufacturing systems and when they are present, they are not extensively leached under relevant conditions. The information summarized here can be utilized to aid the elemental impurity risk assessment process by providing the identities of commonly reported elements and data to support probability estimates of those becoming elemental impurities in the drug product. Furthermore, recommendations are made related to establishing elements of potential product impact for individual materials. Extraneous impurities in drug products provide no therapeutic benefit and thus should be known and controlled. Elemental impurities can arise from a number of sources and by a number of means, including the leaching of elemental entities from drug product packaging and manufacturing systems. To understand the extent to which materials used in packaging systems contain elemental entities and the extent to which those entities leach into drug products to become elemental impurities, the Extractables and Leachables Safety Information Exchange (ELSIE) and International Pharmaceutical Aerosol Consortium on Regulation and Science (IPAC-RS) Consortia have jointly performed a literature review on this subject. Using the compiled information, it was concluded that while packaging materials may contain elemental entities, unless those entities are intentional parts of the materials, the amounts of those elemental entities are generally low. Furthermore, generally only a very small fraction of the total available amount of the entity can be leached under conditions that are relevant to packaged drug products. Thus, risk assessment of sources of elemental impurities in drug products that may be related to materials used in pharmaceutical packaging and manufacturing systems can utilize the information and recommendations presented here. © PDA, Inc. 2015.

Expected background in the LZ experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kudryavtsev, Vitaly A.

2015-08-17

The LZ experiment, featuring a 7-tonne active liquid xenon target, is aimed at achieving unprecedented sensitivity to WIMPs with the background expected to be dominated by astrophysical neutrinos. To reach this goal, extensive simulations are carried out to accurately calculate the electron recoil and nuclear recoil rates in the detector. Both internal (from target material) and external (from detector components and surrounding environment) backgrounds are considered. A very efficient suppression of background rate is achieved with an outer liquid scintillator veto, liquid xenon skin and fiducialisation. Based on the current measurements of radioactivity of different materials, it is shown thatmore » LZ can achieve the reduction of a total background for a WIMP search down to about 2 events in 1000 live days for 5.6 tonne fiducial mass.« less

The relevance of "non-relevant metabolites" from plant protection products (PPPs) for drinking water: the German view.

PubMed

Dieter, Hermann H

2010-03-01

"Non-relevant metabolites" are those degradation products of plant protection products (PPPs), which are devoid of the targeted toxicities of the PPP and devoid of genotoxicity. Most often, "non-relevant metabolites" have a high affinity to the aquatic environment, are very mobile within this environment, and, usually, are also persistent. Therefore, from the point of drinking water hygiene, they must be characterized as "relevant for drinking water" like many other hydrophilic/polar environmental contaminants of different origins. "Non-relevant metabolites" may therefore penetrate to water sources used for abstraction of drinking water and may thus ultimately be present in drinking water. The presence of "non-relevant metabolites" and similar trace compounds in the water cycle may endanger drinking water quality on a long-term scale. During oxidative drinking water treatment, "non-relevant metabolites" may also serve as the starting material for toxicologically relevant transformation products similar to processes observed by drinking water disinfection with chlorine. This hypothesis was recently confirmed by the detection of the formation of N-nitroso-dimethylamine from ozone and dimethylsulfamide, a "non-relevant metabolite" of the fungicide tolylfluanide. In order to keep drinking water preferably free of "non-relevant metabolites", the German drinking water advisory board of the Federal Ministry of Health supports limiting their penetration into raw and drinking water to the functionally (agriculturally) unavoidable extent. On this background, the German Federal Environment Agency (UBA) recently has recommended two health related indication values (HRIV) to assess "non-relevant metabolites" from the view of drinking water hygiene. Considering the sometimes incomplete toxicological data base for some "non-relevant metabolites", HRIV also have the role of health related precautionary values. Depending on the completeness and quality of the toxicological evaluation of a "non-relevant metabolite", its HRIV is either set as 1.0 microg/l (HRIV(a)) or as 3.0 microg/l (HRIV(b)) for lifelong exposure. In case a HRIV would be exceeded, UBA recommends to keep on a precautionary action value (PAV) of 10 microg/l for each "non-relevant metabolite". The HRIV(b) is similar to the maximal value derived by application of the TTC-concept for Cramer Class III (4.5 microg/l). The HRIV(a) and the PAV are similar to values in the EU-guidance document for assessing "non-relevant metabolites" in ground water, with the important difference that the drinking water PAV is not intended to be tolerated for permanent exposure. Drinking water containing "non-relevant metabolites" below the respective HRIVs can also be considered as being sufficiently protective against toxicologically relevant oxidative transformation products which may be formed from "non-relevant metabolites" during drinking water treatment with ozone. However, even drinking water where one or several "non-relevant metabolites" are detected above substance-specific HRIVs is suited for human consumption without health risks. Only in special cases (relatively high "non-relevant metabolite" - concentrations), it could be indicated to examine the finished water for transformation products after treatment with ozone if there are no further treatment steps to eliminate or degrade polar compounds. UBA's "non-relevant metabolite-Recommendation" from April 2008 was positively picked up in 2009 by four important stakeholders in the domain of drinking water management as part of a voluntary cooperation agreement. The aim of such cooperation is to limit the transport of "non-relevant metabolites" into the drinking water to the functionally (and agriculturally) unavoidable extent and insofar to meet special precautionary demands. (c) 2009 Elsevier Inc. All rights reserved.

78 FR 16684 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-18

... provide timely notice. Therefore, you should always check the Agency's Web site at http://www.fda.gov...]derm Voluma XC is indicated for deep (dermal/subcutaneous and/or submuscular/ supraperiosteal... the background material on its Web site prior to the meeting, the background material will be made...

Early space experiments in materials processing

NASA Technical Reports Server (NTRS)

Naumann, R. J.

1979-01-01

A comprehensive survey of the flight experiments conducted in conjunction with the United States Materials Processing in Space Program is presented. Also included are a brief description of the conditions prevailing in an orbiting spacecraft and the research implications provided by this unique environment. What was done and what was learned are summarized in order to serve as a background for future experiments. It is assumed that the reader has some knowledge of the physical sciences but no background in spaceflight experimentation or in the materials science per se.

Thermomechanical Fatigue Behavior of a Silicone Carbide Fiber-Reinforced Calcium Aluminosilicate Glass-Ceramic Matrix Composite

DTIC Science & Technology

1991-01-01

Fibers," Journal of Materials Science Letters, Chapman & Hall, Ltd., London, England, 2, [9], 1983, pp. 80-82. Wang, S-W, and Parvizi- Majidi , A...cross-plied [0/9012s material and found behavior similar to that seen by Rousseau, and Wang & Parvizi- Majidi . 17 References - CHAPTER I1: BACKGROUND...eds., American Society for Testing and Materials, Philadelphia, PA, 1990, pp. 136-151. 63 Wang, S-W, and Parvizi- Majidi , A., "Mechanical Behavior of

Restriction of foot supination by ankle braces in sudden fall situations.

PubMed

Podzielny, S; Hennig, E M

1997-06-01

OBJECTIVE: To investigate the restriction of foot supination in different shoe orthotic combinations for unexpected ankle turns. DESIGN: A supination platform was used to experimentally induce sudden ankle turns. BACKGROUND: This study expanded on previous investigations of the effectiveness of different ankle braces and the influence of shoe material on foot supination. METHODS: For 21 male subjects pressure distribution data, achilles tendon angle, and supination velocity were collected. A comparison between a shoe with cut upper material and an intact shoe was done to show the influence of upper material on supination. The effectiveness of four different orthotics inside of an intact shoe were tested in comparison to the same shoe without ankle brace. Additionally, subjects rated their perceived supination movement of the foot. RESULTS: Between experimental conditions no large differences for the pressure distribution patterns were found. Three of the ankle braces reduced foot supination as well as supination velocities. More than two times lower supination values were measured for a footwear condition in which the upper material was cut away. Already during the free-fall most ankle braces caused a substantial reduction of foot inversion. CONCLUSION: The experiments demonstrated the influence of the upper material of a shoe and different orthotics on foot supination. Biomechanical measurements are necessary because of limited capabilities of subjects in detecting subtalar angular motions. RELEVANCE: This study investigated the effectiveness of different shoe conditions and ankle braces under experimental conditions that simulated unexpected ankle turns, the most frequent causes of sport injuries. The results of the study provide insights into which factors influence the amount of foot supination during unexpected ankle turns.

CUORE and Background Reduction Case Studies for CUPID

NASA Astrophysics Data System (ADS)

Sakai, Michinari; Gozlukluoglu, Nihal; Huang, Huan; Cuore Collaboration

2017-09-01

CUORE (Cryogenic Underground Observatory for Rare Events) is a bolometric experiment at cryogenic temperatures currently in operation to search for neutrinoless double beta decay. Successful detection of this extremely rare process requires stringent control of radioactive backgrounds of the experiment as well as the detector itself. Great care was taken in CUORE to select the materials and various parts that comprise the current detector. However next-generation neutrinoless double beta decay experiments face a challenge to further reduce backgrounds in order to probe more deeply into the effective Majorana neutrino mass phase space. In this presentation we will review the sensitivity and background budget for the currently running experiment CUORE, as well as the target sensitivity and background goals for the next generation experiment CUPID that will cover the inverted neutrino mass hierarchy. We will explore simulation based R&D case studies for background reduction and lay out achievable background reduction levels using possible materials and feasible geometries in the context of CUPID. National Science Foundation.

Concept of Culture. Grade 4. Teacher's Background Material: Enculturation, Cultural Variation, Culture Dynamics [And] Pupil Text [And] Pupil Study Guide [And] A Sequential Curriculum in Anthropology. Test: Form 4, Composite Form for Pre- And Post-Test. (Revised, January 1968). Publications No. 13-17 and 42.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Anthropology Curriculum Project.

This social studies unit includes teacher background material, a student text, study guide, and composite pretest/posttest explaining and discussing cultural concepts. It is part of the Anthropology Curriculum Project and is designed to be used in grade 4. The unit objective is to provide students with a background for understanding man and his…

Local Jurisdictions and Active Shooters: Building Networks, Building Capacities

DTIC Science & Technology

2010-12-01

coordination will be the foundation for identifying relevant sources and materials on the armed active shooter assault. This research will also benefit...CONCLUSION In summary, the literature review identified relevant sources and materials on the importance of an armed attack. While an armed assault...armed with the following: dozens of explosive devices of varying potency, seven knives, two Savage-Stevens 12 gauge double- barrel shotguns with the

The migration background in multicultural care settings – results of a qualitative and quantitative survey of elderly migrants from Turkey

PubMed

Krobisch, Verena; Sonntag, Pia-Theresa; Gül, Kübra; Aronson, Polina; Schenk, Liane

2016-11-01

Background: Migration is associated with an increase of multicultural care settings. The acceptance of such care relations from user’s point of view has been rarely explored yet. Aim: It is examined, if and how elderly migrants from Turkey consider a common migration background respectively a common socio-cultural background of caregivers as relevant. Method: In terms of data triangulation results of a qualitative study and a quantitative study on care expectations of elderly migrants from Turkey have been merged. Data was collected by means of guideline-based and standardised interviews. Analysis included the documentary method according to Bohnsack as well as descriptive and multivariate methods. Results: Cultural and migration-related aspects are considered relevant by the vast majority of respondents. Turkish language skills of caregivers are important to more than three-quarters. According to qualitative results, the possibility to objective as well as culturally shaped intuitive communication in the mother tongue is crucial. Correspondingly, a low level of German language skills and a Turkish ethnic identity are associated with a need of migration-sensitive care. Conclusions: A common socio-cultural background with caregivers and the common mother tongue appear to be prerequisites of good care for elderly migrants from Turkey. Further research should examine the conditions under which multicultural care settings are accepted in this group.

MScanner: a classifier for retrieving Medline citations

PubMed Central

Poulter, Graham L; Rubin, Daniel L; Altman, Russ B; Seoighe, Cathal

2008-01-01

Background Keyword searching through PubMed and other systems is the standard means of retrieving information from Medline. However, ad-hoc retrieval systems do not meet all of the needs of databases that curate information from literature, or of text miners developing a corpus on a topic that has many terms indicative of relevance. Several databases have developed supervised learning methods that operate on a filtered subset of Medline, to classify Medline records so that fewer articles have to be manually reviewed for relevance. A few studies have considered generalisation of Medline classification to operate on the entire Medline database in a non-domain-specific manner, but existing applications lack speed, available implementations, or a means to measure performance in new domains. Results MScanner is an implementation of a Bayesian classifier that provides a simple web interface for submitting a corpus of relevant training examples in the form of PubMed IDs and returning results ranked by decreasing probability of relevance. For maximum speed it uses the Medical Subject Headings (MeSH) and journal of publication as a concise document representation, and takes roughly 90 seconds to return results against the 16 million records in Medline. The web interface provides interactive exploration of the results, and cross validated performance evaluation on the relevant input against a random subset of Medline. We describe the classifier implementation, cross validate it on three domain-specific topics, and compare its performance to that of an expert PubMed query for a complex topic. In cross validation on the three sample topics against 100,000 random articles, the classifier achieved excellent separation of relevant and irrelevant article score distributions, ROC areas between 0.97 and 0.99, and averaged precision between 0.69 and 0.92. Conclusion MScanner is an effective non-domain-specific classifier that operates on the entire Medline database, and is suited to retrieving topics for which many features may indicate relevance. Its web interface simplifies the task of classifying Medline citations, compared to building a pre-filter and classifier specific to the topic. The data sets and open source code used to obtain the results in this paper are available on-line and as supplementary material, and the web interface may be accessed at . PMID:18284683

How to assess good candidate molecules for self-activated optical power limiting

NASA Astrophysics Data System (ADS)

Lundén, Hampus; Glimsdal, Eirik; Lindgren, Mikael; Lopes, Cesar

2018-03-01

Reverse saturable absorbers have shown great potential to attenuate laser radiation. Good candidate molecules and various particles have successfully been incorporated into different glass matrices, enabling the creation of self-activated filters against damaging laser radiation. Although the performance of such filters has been impressive, work is still ongoing to improve the performance in a wider range of wavelengths and pulse widths. The purpose of this tutorial is, from an optical engineering perspective, to give an understanding of the strengths and weaknesses of this class of smart materials, how relevant photophysical parameters are measured and influence system performance and comment on the pitfalls in experimental evaluation of materials. A numerical population model in combination with simple physical formulas is used to demonstrate system behavior from a performance standpoint. Geometrical reasoning shows the advantage of reverse saturable absorption over nonlinear scattering due to a fraction of scattered light being recollected by imaging system optics. The numerical population model illustrates the importance of the optical power limiting performance during the leading edge of a nanosecond pulse, which is most strongly influenced by changes in the two-photon absorption cross section and the triplet linear absorption cross section for a modeled Pt-acetylide. This tutorial not only targets optical engineers evaluating reverse saturable absorbing materials but also aims to assist researchers with a chemistry background working on optical power limiting materials. We also present photophysical data for a series of coumarins that can be useful for the determination of quantum yields and two-photon cross sections and show examples of characterization of molecules with excited triplet states.

Reply to the comment by C. J. Goebel entitled ''Angular momentum of the cosmic background radiation''

DOE Office of Scientific and Technical Information (OSTI.GOV)

Segal, I.E.

1983-02-15

It is argued that the critical discussion by C. J. Goebel of a paper of Jakobsen, Kon, and Segal explaining the Woody-Richards anomaly by an assumption of nontrivial isotropic angular momentum in the cosmic background radiation (in galactic vicinities or otherwise) lacks logical coherence, specific relevance to the cited paper, and is generally without scientific metric.

Issue Paper on Metal Exposure Assessment

EPA Pesticide Factsheets

This paper explores the best approaches for characterizing exposure pathways and routes, estimating the most relevant exposure concentrations, linking exposure to dose, and coping with natural or background concentrations.

Psychological Principles in Materials Selection.

ERIC Educational Resources Information Center

Colvin, Cynthia M.

Those psychological principles which might aid the teacher in the selection of instructional materials are examined. Since learning is a process which builds sequentially on past learning, beginning reading materials should include words that have personal relevance for the individual child. Meaningful material is learned more quickly than…

Meeting EFL Learners Halfway by Using Locally Relevant Authentic Materials

ERIC Educational Resources Information Center

Thomas, Catherine

2014-01-01

The author defines and describes authentic materials and discusses their benefits--citing the Input Hypothesis and the Output Principle in support of such materials--as well as some challenges of using authentic materials. Five categories of authentic materials are presented, and sources for materials and ways to use them in the EFL classroom are…

Supercritical CO2 Foaming of Thermoplastic Materials Derived from Maize: Proof-of-Concept Use in Mammalian Cell Culture Applications

PubMed Central

Trujillo-de Santiago, Grissel; Portales-Cabrera, Cynthia Guadalupe; Portillo-Lara, Roberto; Araiz-Hernández, Diana; Del Barone, Maria Cristina; García-López, Erika; Rojas-de Gante, Cecilia; de los Angeles De Santiago-Miramontes, María; Segoviano-Ramírez, Juan Carlos; García-Lara, Silverio; Rodríguez-González, Ciro Ángel; Alvarez, Mario Moisés; Di Maio, Ernesto; Iannace, Salvatore

2015-01-01

Background Foams are high porosity and low density materials. In nature, they are a common architecture. Some of their relevant technological applications include heat and sound insulation, lightweight materials, and tissue engineering scaffolds. Foams derived from natural polymers are particularly attractive for tissue culture due to their biodegradability and bio-compatibility. Here, the foaming potential of an extensive list of materials was assayed, including slabs elaborated from whole flour, the starch component only, or the protein fraction only of maize seeds. Methodology/Principal Findings We used supercritical CO2 to produce foams from thermoplasticized maize derived materials. Polyethylene-glycol, sorbitol/glycerol, or urea/formamide were used as plasticizers. We report expansion ratios, porosities, average pore sizes, pore morphologies, and pore size distributions for these materials. High porosity foams were obtained from zein thermoplasticized with polyethylene glycol, and from starch thermoplasticized with urea/formamide. Zein foams had a higher porosity than starch foams (88% and 85%, respectively) and a narrower and more evenly distributed pore size. Starch foams exhibited a wider span of pore sizes and a larger average pore size than zein (208.84 vs. 55.43 μm2, respectively). Proof-of-concept cell culture experiments confirmed that mouse fibroblasts (NIH 3T3) and two different prostate cancer cell lines (22RV1, DU145) attached to and proliferated on zein foams. Conclusions/Significance We conducted screening and proof-of-concept experiments on the fabrication of foams from cereal-based bioplastics. We propose that a key indicator of foamability is the strain at break of the materials to be foamed (as calculated from stress vs. strain rate curves). Zein foams exhibit attractive properties (average pore size, pore size distribution, and porosity) for cell culture applications; we were able to establish and sustain mammalian cell cultures on zein foams for extended time periods. PMID:25859853

Background Materials Concerning Child and Family Services Act, 1975, H.R. 2966. Committee Print, 94th Congress, 2d Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Education and Labor.

This document contains the text of Child and Family Services Act of 1975, H.R. 2966, and background materials concerning that act. Included are reprints of many newspaper and magazine articles as well as statements of members of Congress in response to the campaign against the bill. (MS)

Druze Minority Students Learning Hebrew in Israel: The Relationship of Attitudes, Cultural Background, and Interest of Material to Reading Comprehension in a Second Language.

ERIC Educational Resources Information Center

Abu-Rabia, Salim

1996-01-01

Examines Israeli-Druze students' reading comprehension in Hebrew as a second language as related to their attitudes, cultural background, and interest in the material. Participants were administered questionnaires, Arab and Jewish cultural stories, and multiple-choice questions about each story. Results are discussed. (51 references) (Author/CK)

Periodic Comet Shoemaker-Levy 9 Collides with Jupiter. Background Material for Science Teachers.

ERIC Educational Resources Information Center

Jet Propulsion Lab., Pasadena, CA.

In July of 1994, fragments of Comet Shoemaker-Levy collided with Jupiter. This document has been provided to better inform students of the work that will be done by scientists and others involved in the study of this event. This document offers some background material on Jupiter, comets, what has and possibly will happen, and how scientists…

Expected Backgrounds of the BetaCage, an Ultra-sensitive Screener for Surface Contamination

NASA Astrophysics Data System (ADS)

Wang, Boqian; Bunker, Raymond; Schnee, Richard; Bowles, Michael; Kos, Marek; Ahmed, Zeeshan; Golwala, Sunil; Nelson, Robert; Grant, Darren

2013-04-01

Material screening for low-energy betas and alphas is necessary for rare-event-search experiments, such as dark matter and neutrinoless double-beta decay searches where surface radiocontamination has become a significant background. The BetaCage, a gaseous neon time-projection chamber, has been proposed as a screener for emitters of low-energy betas and alphas to which existing screening facilities are insufficiently sensitive. The expected sensitivity is 0.1 betas / (keV m^2 day) and 0.1 alphas / (m^2 day). Expected backgrounds are dominated by Compton scattering of external photons in the sample to be screened; radioassays and simulations indicate backgrounds from detector materials and radon daughters should be subdominant. We will report on details of the background simulations and the detector design that allows discrimination to reach these sensitivity levels.

Modeling surface backgrounds from radon progeny plate-out

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perumpilly, G.; Guiseppe, V. E.; Snyder, N.

2013-08-08

The next generation low-background detectors operating deep underground aim for unprecedented low levels of radioactive backgrounds. The surface deposition and subsequent implantation of radon progeny in detector materials will be a source of energetic background events. We investigate Monte Carlo and model-based simulations to understand the surface implantation profile of radon progeny. Depending on the material and region of interest of a rare event search, these partial energy depositions can be problematic. Motivated by the use of Ge crystals for the detection of neutrinoless double-beta decay, we wish to understand the detector response of surface backgrounds from radon progeny. Wemore » look at the simulation of surface decays using a validated implantation distribution based on nuclear recoils and a realistic surface texture. Results of the simulations and measured α spectra are presented.« less

Steel Alloy Hot Roll Simulations and Through-Thickness Variation Using Dislocation Density-Based Modeling

NASA Astrophysics Data System (ADS)

Jansen Van Rensburg, G. J.; Kok, S.; Wilke, D. N.

2017-10-01

Different roll pass reduction schedules have different effects on the through-thickness properties of hot-rolled metal slabs. In order to assess or improve a reduction schedule using the finite element method, a material model is required that captures the relevant deformation mechanisms and physics. The model should also report relevant field quantities to assess variations in material state through the thickness of a simulated rolled metal slab. In this paper, a dislocation density-based material model with recrystallization is presented and calibrated on the material response of a high-strength low-alloy steel. The model has the ability to replicate and predict material response to a fair degree thanks to the physically motivated mechanisms it is built on. An example study is also presented to illustrate the possible effect different reduction schedules could have on the through-thickness material state and the ability to assess these effects based on finite element simulations.

The Effect of Text Materials with Relevant Language, Illustrations and Content Upon the Reading Achievement and Reading Preference (Attitude) of Black Primary and Intermediate Inner-City Students.

ERIC Educational Resources Information Center

Grant, Gloria W.

The purpose of this study was to examine the effect of text materials with relevant language, illustrations, and content upon the reading achievement and reading preference (attitude) of black primary and intermediate grade inner-city students. The subjects for the study were 330 black students enrolled in three schools in a large urban area. A…

A Long-Term View on Perovskite Optoelectronics.

PubMed

Docampo, Pablo; Bein, Thomas

2016-02-16

Recently, metal halide perovskite materials have become an exciting topic of research for scientists of a wide variety of backgrounds. Perovskites have found application in many fields, starting from photovoltaics and now also making an impact in light-emitting applications. This new class of materials has proven so interesting since it can be easily solution processed while exhibiting materials properties approaching the best inorganic optoelectronic materials such as GaAs and Si. In photovoltaics, in only 3 years, efficiencies have rapidly increased from an initial value of 3.8% to over 20% in recent reports for the commonly employed methylammonium lead iodide (MAPI) perovskite. The first light emitting diodes and light-emitting electrochemical cells have been developed already exhibiting internal quantum efficiencies exceeding 15% for the former and tunable light emission spectra. Despite their processing advantages, perovskite optoelectronic materials suffer from several drawbacks that need to be overcome before the technology becomes industrially relevant and hence achieve long-term application. Chief among these are the sensitivity of the structure toward moisture and crystal phase transitions in the device operation regime, unreliable device performance dictated by the operation history of the device, that is, hysteresis, the inherent toxicity of the structure, and the high cost of the employed charge selective contacts. In this Account, we highlight recent advances toward the long-term viability of perovskite photovoltaics. We identify material decomposition routes and suggest strategies to prevent damage to the structure. In particular, we focus on the effect of moisture upon the structure and stabilization of the material to avoid phase transitions in the solar cell operating range. Furthermore, we show strategies to achieve low-cost chemistries for the development of hole transporters for perovskite solar cells, necessary to be able to compete with other established technologies. Additionally, we explore the application of perovskite materials in optoelectronic applications. We show that perovskite materials can function efficiently both as a film in light-emitting diodes and also in the form of nanoparticles in light-emitting electrochemical cells. Perovskite materials have indeed a very bright future.

Size-dependent disproportionation (in 2-20 nm regime) and hybrid Bond Valence derived interatomic potentials for BaTaO2N

NASA Astrophysics Data System (ADS)

Anbalagan, Kousika; Thomas, Tiju

2018-05-01

Interatomic potentials for complex materials (like ceramic systems) are important for realistic molecular dynamics (MD) simulations. Such simulations are relevant for understanding equilibrium, transport and dynamical properties of materials, especially in the nanoregime. Here we derive a hybrid interatomic potential (based on bond valence (BV) derived Morse and Coulomb terms), for modeling a complex ceramic, barium tantalum oxynitride (BaTaO2N). This material has been chosen due to its relevance for capacitive and photoactive applications. However, the material presents processing challenges such as the emergence of non-stoichiometric phases during processing, demonstrating complex processing-property correlations. This makes MD investigations of this material both scientifically and technologically relevant. The BV based hybrid potential presented here has been used for simulating sintering of BaTaO2N nanoparticles ( 2-20 nm) under different conditions (using the relevant canonical ensemble). Notably, we show that sintering of particles of diameter < 10 nm requires no external sintering aids such as the addition of barium sources (since stoichiometry is preserved during heat treatment in this size regime). Also, we observe that sintering of particles > 10 nm in size results in the formation of a cluster of tantalum and oxygen atoms at the interface of the BaTaO2N particles. This is in agreement with the experimental reports. The results presented here suggest that the potential proposed can be used to explore dynamical properties of BaTaO2N and related systems. This work will also open avenues for development of nanoscience-enabled aid-free sintering approaches to this and related materials.

System for characterizing semiconductor materials and photovoltaic devices through calibration

DOEpatents

Sopori, Bhushan L.; Allen, Larry C.; Marshall, Craig; Murphy, Robert C.; Marshall, Todd

1998-01-01

A method and apparatus for measuring characteristics of a piece of material, typically semiconductor materials including photovoltaic devices. The characteristics may include dislocation defect density, grain boundaries, reflectance, external LBIC, internal LBIC, and minority carrier diffusion length. The apparatus includes a light source, an integrating sphere, and a detector communicating with a computer. The measurement or calculation of the characteristics is calibrated to provide accurate, absolute values. The calibration is performed by substituting a standard sample for the piece of material, the sample having a known quantity of one or more of the relevant characteristics. The quantity measured by the system of the relevant characteristic is compared to the known quantity and a calibration constant is created thereby.

System for characterizing semiconductor materials and photovoltaic devices through calibration

DOEpatents

Sopori, B.L.; Allen, L.C.; Marshall, C.; Murphy, R.C.; Marshall, T.

1998-05-26

A method and apparatus are disclosed for measuring characteristics of a piece of material, typically semiconductor materials including photovoltaic devices. The characteristics may include dislocation defect density, grain boundaries, reflectance, external LBIC, internal LBIC, and minority carrier diffusion length. The apparatus includes a light source, an integrating sphere, and a detector communicating with a computer. The measurement or calculation of the characteristics is calibrated to provide accurate, absolute values. The calibration is performed by substituting a standard sample for the piece of material, the sample having a known quantity of one or more of the relevant characteristics. The quantity measured by the system of the relevant characteristic is compared to the known quantity and a calibration constant is created thereby. 44 figs.

Background nuclei measurements and implications for cavitation inception in hydrodynamic test facilities

NASA Astrophysics Data System (ADS)

Venning, J. A.; Khoo, M. T.; Pearce, B. W.; Brandner, P. A.

2018-04-01

Water susceptibility and background nuclei content in a water tunnel are investigated using a cavitation susceptibility meter. The measured cumulative histogram of nuclei concentration against critical pressure shows a power law dependence over a large range of concentrations and pressures. These results show that the water strength is not characterised by a single tension but is susceptible to `all' tensions depending on the relevant timescale. This background nuclei population is invariant to tunnel conditions showing that it is stabilised against dissolution. Consideration of a practical cavitating flow about a sphere shows that although background nuclei may be activated, their numbers are so few compared with other sources that they are insignificant for this case.

A Bird Strike Handbook for Base-Level Managers

DTIC Science & Technology

1984-09-01

Background Literature Review . . . . . . . . . . 7 Statistical History. . • . 7 . . . . • . . • Bird Behavior. ... . .. . . .. . . 9 Literature...compiled all relevant information through an extensive literature search, review of base-level documents, and personal interviews. The final product...34. .•" ’ft,, ft. . 𔃾 ft ’ft V. V. 11. Background Literature Review Chapter 4 of this thesis will be a handbook for use by the base-level managers. In essence

Primary and Secondary Anisotropies of Cosmic Microwave Background

NASA Technical Reports Server (NTRS)

Seljak, Uros

2002-01-01

The three main topics we proposed to do are linear calculations (continuing development of CMBFAST), nonlinear calculations of gas physics relevant to Cosmic Microwave Background (CMB) (Sunyaev-Zeldovich effect, etc.) and nonlinear effects on CMB due to dark matter (gravitational lensing, etc.). We describe each of these topics, as well as additional topics PI and his group worked on that are related to the topics in the proposal.

Readability of Invasive Procedure Consent Forms

PubMed Central

Eltorai, Adam E. M.; Naqvi, Syed S.; Ghanian, Soha; Eberson, Craig P.; Weiss, Arnold‐Peter C.; Born, Christopher T.

2015-01-01

Abstract Background Informed consent is a pillar of ethical medicine which requires patients to fully comprehend relevant issues including the risks, benefits, and alternatives of an intervention. Given the average reading skill of US adults is at the 8th grade level, the American Medical Association (AMA) and the National Institutes of Health (NIH) recommend patient information materials should not exceed a 6th grade reading level. We hypothesized that text provided in invasive procedure consent forms would exceed recommended readability guidelines for medical information. Materials and methods To test this hypothesis, we gathered procedure consent forms from all surgical inpatient hospitals in the state of Rhode Island. For each consent form, readability analysis was measured with the following measures: Flesch Reading Ease Formula, Flesch–Kincaid Grade Level, Fog Scale, SMOG Index, Coleman–Liau Index, Automated Readability Index, and Linsear Write Formula. These readability scores were used to calculate a composite Text Readability Consensus Grade Level. Results Invasive procedure consent forms were found to be written at an average of 15th grade level (i.e., third year of college), which is significantly higher than the average US adult reading level of 8th grade (p < 0.0001) and the AMA/NIH recommended readability guidelines for patient materials of 6th grade (p < 0.0001). Conclusion Invasive procedure consent forms have readability levels which makes comprehension difficult or impossible for many patients. Efforts to improve the readability of procedural consent forms should improve patient understanding regarding their healthcare decisions. PMID:26678039

The road not taken: Applications of fluorescence spectroscopy and electronic structure theory to systems of materials and biological relevance

NASA Astrophysics Data System (ADS)

Carlson, Philip Joseph

Applications of Fluorescence Spectroscopy and Electronic Structure Theory to Systems of Materials and Biological Relevance. The photophysics of curcumin was studied in micelles and the solvation dynamics were probed. The high-energy ionic liquid HEATN was also studied using the fragment molecular orbital method. The solvation dynamics of the HEATN system were determined. This marks the first study of the solvation dynamics in a triazolium ionic liquid system.

Spectral characterization of natural backgrounds

NASA Astrophysics Data System (ADS)

Winkelmann, Max

2017-10-01

As the distribution and use of hyperspectral sensors is constantly increasing, the exploitation of spectral features is a threat for camouflaged objects. To improve camouflage materials at first the spectral behavior of backgrounds has to be known to adjust and optimize the spectral reflectance of camouflage materials. In an international effort, the NATO CSO working group SCI-295 "Development of Methods for Measurements and Evaluation of Natural Background EO Signatures" is developing a method how this characterization of backgrounds has to be done. It is obvious that the spectral characterization of a background will be quite an effort. To compare and exchange data internationally the measurements will have to be done in a similar way. To test and further improve this method an international field trial has been performed in Storkow, Germany. In the following we present first impressions and lessons learned from this field campaign and describe the data that has been measured.

A unidirectional acoustic cloak for multilayered background media with homogeneous metamaterials

NASA Astrophysics Data System (ADS)

Zhu, Jian; Chen, Tianning; Liang, Qingxuan; Wang, Xiaopeng; Xiong, Jie; Jiang, Ping

2015-08-01

The acoustic cloak, which can make an object hard to detect acoustically in a homogeneous background, has attracted great attention from researchers in recent years. The inhomogeneous background media were considered in this paper. The relative constitutive parameters were derived for acoustic cloaks working in multilayered media. And a unidirectional acoustic cloak for layered background media was proposed, designed and implemented successfully in a wide frequency range. In water and NaCl aqueous solution, the acoustic cloak was designed and realized with homogeneous metamaterials which were composed of steel and porous materials. The effective parameters of the unit cells of the cloak were determined by using the effective medium theory. Numerical results demonstrated excellent cloaking performance and showed that such a device could be physically realized with natural materials which will greatly promote the real applications of an invisibility cloak in inhomogeneous backgrounds.

Instructional Materials for Improved Job Performance.

ERIC Educational Resources Information Center

Foley, John P., Jr.

1978-01-01

Instructional materials developed in military research to improve performance of electromechanical maintenance tasks are described, with implications for teacher education. The materials require task analysis, job task relevance, and task-oriented training. Although many industries have implemented these techniques, teacher training institutions…

Respectability and Relevance: Reflections on Richard Peters and Analytic Philosophy of Education

ERIC Educational Resources Information Center

Snook, Ivan

2013-01-01

I argue that, after Dewey, Peters was the first modern philosopher of education to write material (in English) that was both philosophically respectable and relevant to the day-to-day concerns of teachers. Since then, some philosophers of education have remained (more or less) relevant but not really respectable while others have "taken off into…

Prevalence of human cell material: DNA and RNA profiling of public and private objects and after activity scenarios.

PubMed

van den Berge, M; Ozcanhan, G; Zijlstra, S; Lindenbergh, A; Sijen, T

2016-03-01

Especially when minute evidentiary traces are analysed, background cell material unrelated to the crime may contribute to detectable levels in the genetic analyses. To gain understanding on the composition of human cell material residing on surfaces contributing to background traces, we performed DNA and mRNA profiling on samplings of various items. Samples were selected by considering events contributing to cell material deposits in exemplary activities (e.g. dragging a person by the trouser ankles), and can be grouped as public objects, private samples, transfer-related samples and washing machine experiments. Results show that high DNA yields do not necessarily relate to an increased number of contributors or to the detection of other cell types than skin. Background cellular material may be found on any type of public or private item. When a major contributor can be deduced in DNA profiles from private items, this can be a different person than the owner of the item. Also when a specific activity is performed and the areas of physical contact are analysed, the "perpetrator" does not necessarily represent the major contributor in the STR profile. Washing machine experiments show that transfer and persistence during laundry is limited for DNA and cell type dependent for RNA. Skin conditions such as the presence of sebum or sweat can promote DNA transfer. Results of this study, which encompasses 549 samples, increase our understanding regarding the prevalence of human cell material in background and activity scenarios. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Carbon, oxygen and their interaction with intrinsic point defects in solar silicon ribbon material: A speculative approach

NASA Technical Reports Server (NTRS)

Goesele, U.; Ast, D. G.

1983-01-01

Some background information on intrinsic point defects is provided and on carbon and oxygen in silicon in so far as it may be relevant for the efficiency of solar cells fabricated from EFG ribbon material. The co-precipitation of carbon and oxygen and especially of carbon and silicon self interstitials are discussed. A simple model for the electrical activity of carbon-self-interstitial agglomerates is presented. The self-interstitial content of these agglomerates is assumed to determine their electrical activity and that both compressive stresses (high self-interstitial content) and tensile stresses (low self-interstitial content) give rise to electrical activity of the agglomerates. The self-interstitial content of these carbon-related agglomerates may be reduced by an appropriate high temperature treatment and enhanced by a supersaturation of self-interstitials generated during formation of the p-n junction of solar cells. Oxygen present in supersaturation in carbon-rich silicon may be induced to form SiO, precipitates by self-interstitials generated during phosphorus diffusion. It is proposed that the SiO2-Si interface of the precipates gives rise to a continuum of donor stables and that these interface states are responsible for at least part of the light inhancement effects observed in oxygen containing EFG silicon after phosphorus diffusion.

Establishment and Characterization of Primary Glioblastoma Cell Lines from Fresh and Frozen Material: A Detailed Comparison

PubMed Central

Mullins, Christina Susanne; Schneider, Björn; Stockhammer, Florian; Krohn, Mathias; Classen, Carl Friedrich; Linnebacher, Michael

2013-01-01

Background Development of clinically relevant tumor model systems for glioblastoma multiforme (GBM) is important for advancement of basic and translational biology. High molecular heterogeneity of GBM tumors is well recognized, forming the rationale for molecular tests required before administration of several of the novel therapeutics rapidly entering the clinics. One model that has gained wide acceptance is the primary cell culture model. The laborious and time consuming process is rewarded with a relative high success rate (about 60%). We here describe and evaluate a very simple cryopreservation procedure for GBM tissue prior to model establishment that will considerably reduce the logistic complexity. Methods Twenty-seven GBM samples collected ad hoc were prepared for primary cell culture freshly from surgery (#1) and after cryopreservation (#2). Results Take rates after cryopreservation (59%) were as satisfactory as from fresh tissue (63%; p = 1.000). We did not observe any relevant molecular or phenotypic differences between cell lines established from fresh or vitally frozen tissue. Further, sensitivity both towards standard chemotherapeutic agents (Temozolomide, BCNU and Vincristine) and novel agents like the receptor tyrosine kinase inhibitor Imatinib did not differ. Conclusions Our simple cryopreservation procedure facilitates collection, long-time storage and propagation (modeling) of clinical GBM specimens (potentially also from distant centers) for basic research, (pre-) clinical studies of novel therapies and individual response prediction. PMID:23951083

Acute alcohol effects on facial expressions of emotions in social drinkers: a systematic review

PubMed Central

Capito, Eva Susanne; Lautenbacher, Stefan; Horn-Hofmann, Claudia

2017-01-01

Background As known from everyday experience and experimental research, alcohol modulates emotions. Particularly regarding social interaction, the effects of alcohol on the facial expression of emotion might be of relevance. However, these effects have not been systematically studied. We performed a systematic review on acute alcohol effects on social drinkers’ facial expressions of induced positive and negative emotions. Materials and methods With a predefined algorithm, we searched three electronic databases (PubMed, PsycInfo, and Web of Science) for studies conducted on social drinkers that used acute alcohol administration, emotion induction, and standardized methods to record facial expressions. We excluded those studies that failed common quality standards, and finally selected 13 investigations for this review. Results Overall, alcohol exerted effects on facial expressions of emotions in social drinkers. These effects were not generally disinhibiting, but varied depending on the valence of emotion and on social interaction. Being consumed within social groups, alcohol mostly influenced facial expressions of emotions in a socially desirable way, thus underscoring the view of alcohol as social lubricant. However, methodical differences regarding alcohol administration between the studies complicated comparability. Conclusion Our review highlighted the relevance of emotional valence and social-context factors for acute alcohol effects on social drinkers’ facial expressions of emotions. Future research should investigate how these alcohol effects influence the development of problematic drinking behavior in social drinkers. PMID:29255375

General practitioners’ and primary care nurses’ care for people with disabilities: quality of communication and awareness of supportive services

PubMed Central

Storms, Hannelore; Marquet, Kristel; Claes, Neree

2017-01-01

Background General practitioners (GPs) and primary-care nurses (PCNs) often feel inexperienced or inadequately educated to address unmet needs of people with disabilities (PDs). In this research, GPs’ and PCNs’ communication with PDs and health care professionals, as well as their awareness of supportive measures relevant to PDs (sensory disabilities excluded), was examined. Materials and methods An electronic questionnaire was sent out to 545 GPs and 1,547 PCNs employed in Limburg (Belgium). GPs and PCNs self-reported about both communication with parties involved in care for PDs (scale very good, good, bad, very bad) and their level of awareness of supportive measures relevant for PDs (scale unaware, inadequately aware, adequately aware). Results Of the questionnaire recipients, 6.6% (36 of 545) of GPs and 37.6% (588 of 1,547) of PCNs participated: 68.8% of 32 GPs and 45.8% of 443 PCNs categorized themselves as communicating well with PDs, and attributed miscommunication to limited intellectual capacities of PDs. GPs and PCNs reported communicating well with other health care professionals. Inadequate awareness was reported for tools to communicate (88.3% of GPs, 89% of PCNs) and benefits for PDs (44.1% of GPs, 66.9% of PCNs). Conclusion GPs’ and PCNs’ lacking awareness of communication aids is problematic. Involvement in a multidisciplinary, expert network might bypass inadequate awareness of practical and social support measures. PMID:29033579

Effectiveness of Organ Donation Information Campaigns in Germany: A Facebook Based Online Survey

PubMed Central

Settmacher, Utz; Wurst, Christine; Dirsch, Olaf

2015-01-01

Background The German transplantation system is in a crisis due to a lack of donor organs. Information campaigns are one of the main approaches to increase organ donation rates. Since 2012, German health insurance funds are obliged by law to inform their members about organ donation. We raised the hypothesis: The willingness to sign a donor card rises due to the subsequent increase of specific knowledge by receiving the information material of the health insurance funds. Objective The objective of the study was to assess the influence of information campaigns on the specific knowledge and the willingness to donate organs. Methods We conducted an online survey based on recruitment via Facebook groups, advertisements using the snowball effect, and on mailing lists of medical faculties in Germany. Besides the demographic data, the willingness to hold an organ donor card was investigated. Specific knowledge regarding transplantation was explored using five factual questions resulting in a specific knowledge score. Results We recruited a total of 2484 participants, of which 32.7% (300/917) had received information material. Mean age was 29.9 (SD 11.0, median 26.0). There were 65.81% (1594/2422) of the participants that were female. The mean knowledge score was 3.28 of a possible 5.00 (SD 1.1, median 3.0). Holding a donor card was associated with specific knowledge (P<.001), but not with the general education level (P=.155). Receiving information material was related to holding a donor card (P<.001), but not to a relevant increase in specific knowledge (difference in mean knowledge score 3.20 to 3.48, P=.006). The specific knowledge score and the percentage of organ donor card holders showed a linear association (P<.001). Conclusions The information campaign was not associated with a relevant increase in specific knowledge, but with an increased rate in organ donor card holders. This effect is most likely related to the feeling of being informed, together with an easy access to the organ donor card. PMID:26220442

Properties of planetary ices in the NH3 + CO2 ± H2O ternary system using neutron diffraction and ab initio calculations

NASA Astrophysics Data System (ADS)

Howard, C. M.; Wood, I. G.; Fortes, A. D.; Vocadlo, L.

2016-12-01

BackgroundInteractions between simple molecules are of fundamental interest across diverse areas of the physical sciences, and the ternary system NH3 + CO2 ± H2O is no exception. In the outer solar system, interaction of CO2 with aqueous ammonia is likely to occur, synthesizing `rock-forming' minerals [1], with CO2 perhaps playing a role in ammonia-water oceans and cryomagmas inside icy planetary bodies - the discovery of ammonium carbonates in a crater of Pluto's moon Charon [2] adds weight to CO2 occuring in these planetary environments. In the same context, ammonium carbonates may have some astrobiological relevance, since removal of water leads to the formation of urea. On Earth, combination of CO2 with aqueous ammonia has relevance to carbon capture schemes [3], and there is interest in using such materials for hydrogen storage in fuel cells [4]. Consequently, from earthly matters of climate change to the study of extraterrestrial ices, understanding the structures and properties of ammonium carbonates are important. Despite this, our knowledge of ammonium carbonates is limited under ambient conditions of pressure and temperature and is entirely absent at the higher pressures, severely limiting our ability to model the behaviour of NH3 + CO2 ± H2O solids and fluids in planetary environments. ResultsWe report the results of several experiments using variable pressure and temperature neutron diffraction work on ammonium carbonate monohydrate, ammonium bicarbonate and ammonium carbamate, with complementary Density Functional Theory (DFT) calculations. The excellent agreement between experiments and DFT calculations obtained so far adds weight to the accuracy of calculated material properties of ammonium sesquicarbonate monohydrate and several polymorphs of urea where little empirical data exists. These experimental and computational studies provide the structural, thermoelastic and vibrational information required for accurate planetary modelling and remote identification of these material on planetary surfaces. [1] Kargel (1991) Icarus 94 , 368-390. [2] De Sanctis et al. (2016) Nature Letters, 1-4. [3] Han et al. (2013) Int. J. Greenhouse Gas Control 14 , 270-281. [4] Lan et al. (2012) Int. J. Hydrogen Energy 37 (2), 1482-1494.

Determination of target detection limits in hyperspectral data using band selection and dimensionality reduction

NASA Astrophysics Data System (ADS)

Gross, W.; Boehler, J.; Twizer, K.; Kedem, B.; Lenz, A.; Kneubuehler, M.; Wellig, P.; Oechslin, R.; Schilling, H.; Rotman, S.; Middelmann, W.

2016-10-01

Hyperspectral remote sensing data can be used for civil and military applications to robustly detect and classify target objects. High spectral resolution of hyperspectral data can compensate for the comparatively low spatial resolution, which allows for detection and classification of small targets, even below image resolution. Hyperspectral data sets are prone to considerable spectral redundancy, affecting and limiting data processing and algorithm performance. As a consequence, data reduction strategies become increasingly important, especially in view of near-real-time data analysis. The goal of this paper is to analyze different strategies for hyperspectral band selection algorithms and their effect on subpixel classification for different target and background materials. Airborne hyperspectral data is used in combination with linear target simulation procedures to create a representative amount of target-to-background ratios for evaluation of detection limits. Data from two different airborne hyperspectral sensors, AISA Eagle and Hawk, are used to evaluate transferability of band selection when using different sensors. The same target objects were recorded to compare the calculated detection limits. To determine subpixel classification results, pure pixels from the target materials are extracted and used to simulate mixed pixels with selected background materials. Target signatures are linearly combined with different background materials in varying ratios. The commonly used classification algorithms Adaptive Coherence Estimator (ACE) is used to compare the detection limit for the original data with several band selection and data reduction strategies. The evaluation of the classification results is done by assuming a fixed false alarm ratio and calculating the mean target-to-background ratio of correctly detected pixels. The results allow drawing conclusions about specific band combinations for certain target and background combinations. Additionally, generally useful wavelength ranges are determined and the optimal amount of principal components is analyzed.

The Amateur Scientist.

ERIC Educational Resources Information Center

Walker, Jearl

1984-01-01

Discusses how to stop a spinning object (such as rotating fan blades) by humming and the perception of curious blue arcs around a light. Background information, relevant research, and activities related to these two topics are provided. (JN)

Cultural Competence in the Treatment of Addictions: Theory, Practice and Evidence.

PubMed

Gainsbury, Sally M

2017-07-01

Culturally and linguistically diverse (CALD) populations often have high rates of addictive disorders, but lower rates of treatment seeking and completion than the mainstream population. A significant barrier to treatment is the lack of culturally relevant and appropriate treatment. A literature review was conducted to identify relevant literature related to cultural competence in mental health services delivery and specifically treatment for addictive disorders. Several theoretical models of cultural competence in therapy have been developed, but the lack of rigorous research limits the empirical evidence available. Research indicates that culturally competent treatment practices including providing therapy and materials in the client's language, knowledge, understanding and appreciation for cultural perspectives and nuances, involving the wider family and community and training therapists can enhance client engagement, retention and treatment outcomes for substance use and gambling. Further methodologically rigorous research is needed to isolate the impact of cultural competence for the treatment of addictions and guide research to determine treatment efficacy within specific CALD populations. Training therapists and recruiting therapists and researchers from CALD communities is important to ensure an ongoing focus and improved outcomes for CALD populations due to the importance of engaging these populations with addiction treatment. Copyright © 2016 John Wiley & Sons, Ltd. Key Practitioner Message: The treatment needs of culturally diverse individuals with addictions are often not met. Theoretical models can guide therapists in incorporating cultural competence. Culturally targeted treatments increase recruitment, retention and treatment outcomes. Cultural competence includes matching clinicians and clients on linguistic and cultural backgrounds as well as being mindful of the impact of culture on client's experience of addiction problems. Few methodologically rigorous trials have been conducted to guide treatment practices and research needs to be incorporated into existing culturally relevant treatment services. Copyright © 2016 John Wiley & Sons, Ltd.

A comparison of the mechanical properties of fiberglass cast materials and their clinical relevance.

PubMed

Berman, A T; Parks, B G

1990-01-01

The mechanical properties of five synthetic fiberglass casting materials were evaluated and compared with the properties of plaster of Paris. Two of the tests were designed to bear clinical relevance and the third to determine intrinsic material properties. The effect of water on strength degradation was also evaluated. It was found that the synthetics as a group are far superior to plaster of Paris in all methods of testing and that, among the synthetics, KCast Tack Free, Deltalite "S", and KCast Improved were the stronger materials. Clinically, the most important results are that the synthetics attain their relatively high strength in a much shorter time frame than does plaster of Paris, and retain 70-90% of their strength after being immersed in water and allowed to dry.

Synchrotron x-ray diffraction studies of the structural properties of electrode materials in operating battery cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thurston, T.R.; Jisrawi, N.M.; Mukerjee, S.

Hard x rays from a synchrotron source were utilized in diffraction experiments which probed the bulk of electrode materials while they were operating {ital in} {ital situ} in battery cells. Two technologically relevant electrode materials were examined; an {ital AB}{sub 2}-type anode in a nickel{endash}metal{endash}hydride cell and a LiMn{sub 2}O{sub 4} cathode in a Li-ion {open_quote}{open_quote}rocking chair{close_quote}{close_quote} cell. Structural features such as lattice expansions and contractions, phase transitions, and the formation of multiple phases were easily observed as either hydrogen or lithium was electrochemically intercalated in and out of the electrode materials. The relevance of this technique for future studiesmore » of battery electrode materials is discussed. {copyright} {ital 1996 American Institute of Physics.}« less

Cosmic microwave background constraints on primordial black hole dark matter

NASA Astrophysics Data System (ADS)

Aloni, Daniel; Blum, Kfir; Flauger, Raphael

2017-05-01

We revisit cosmic microwave background (CMB) constraints on primordial black hole dark matter. Spectral distortion limits from COBE/FIRAS do not impose a relevant constraint. Planck CMB anisotropy power spectra imply that primordial black holes with mBHgtrsim 5 Msolar are disfavored. However, this is susceptible to sizeable uncertainties due to the treatment of the black hole accretion process. These constraints are weaker than those quoted in earlier literature for the same observables.

Advocacy and mass education in plastic surgery: Efforts and outcomes

PubMed Central

Panse, Nikhil Shrikrishna

2017-01-01

Background: Awareness of plastic surgery is lacking. Be it reconstructive surgery, or aesthetic surgery, public education and awareness regarding the spectrum is the need of the hour. Materials and Methods: We undertook a string of activities for patient awareness and education for burn prevention, occupational hand injuries prevention, skin banking awareness and various other conditions relevant to us as plastic surgeons. Use of social media helped us for increasing the reach of our projects. Observation and Results: Some of the projects we started, we are still pursuing with sincerity, and some never really picked up. A wide range and spectrum of activities were undertaken, and we would like to think that we have made some impact towards advocacy of plastic surgery; however, the measurable impact of these initiatives is questionable. Conclusion: Collective efforts for promotion of the speciality using innovative methods, use of celebrities for awareness and social media amongst other things must be undertaken to make a sustained and demonstrable impact towards advocacy of plastic surgery. PMID:28615817

Oral oncoprevention by phytochemicals - a systematic review disclosing the therapeutic dilemma.

PubMed

Bhavana, Sujana Mulk; Lakshmi, Chintamaneni Raja

2014-10-01

The aim of this article is to emphasize and focus on the preclinical and clinical update on phytochemicals and their role in prevention of oral carcinogenesis. Accordingly, the literature search was made following database: Embase, Medline, Science Citation index, NIH public access, pubmed and Cochrane Database of systematic reviews. Several internet websites were also searched to access publications from major phytochemical research sites and relevant information was obtained with regards to each plant chemical. The authors also spotted different list servers through wignet.com, Stanford cancer research etc: The data base search was made from the inception to 1988 and updated till 2013. A systematic method was obtained for literature search and data collection was critiqued. 60 articles were searched, among which there were only 6 systematic reviews on phytochemicals regarding oral carcinogenesis. Additional articles were obtained on phytochemicals and their mechanism of action in other cancers, which were regarded as background material. The studies done by various authors on each phytochemical has been briefly emphasized.

Literature Survey of Crude Oil Properties Relevant to Handling and Fire Safety in Transport.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lord, David; Luketa, Anay; Wocken, Chad

2015-03-01

Several fiery rail accidents in 2013-2015 in the U.S. and Canada carrying crude oil produced from the Bakken region of North Dakota have raised questions at many levels on the safety of transporting this, and other types of crude oil, by rail. Sandia National Laboratories was commissioned by the U.S. Department of Energy to investigate the material properties of crude oils, and in particular the so-called "tight oils" like Bakken that comprise the majority of crude oil rail shipments in the U.S. at the current time. The current report is a literature survey of public sources of information on crudemore » oil properties that have some bearing on the likelihood or severity of combustion events that may occur around spills associated with rail transport. The report also contains background information including a review of the notional "tight oil" field operating environment, as well a basic description of crude oils and potential combustion events in rail transport. This page intentionally blank« less

What is in a word? Neuron: Early usage and evolution in antiquity to its long-lasting current significance.

PubMed

Frixione, Eugenio

2017-01-01

Neuron, a Greek term with a rustic background, made much of its way to its current significance since antiquity, when full recognition was achieved that sensory and motor signals travel through the animal body along nerves (neura, plural). Drawing from classic and recent historical scholarship, this study identifies the successive steps toward such a major breakthrough, starting from the usage of the expression in archaic times and continuing up to the much later transference of a mature theory into the modern world. It is shown that four main consecutive stages may be distinguished in the process: (a) incorporation of the word into early anatomical terminology; (b) theorizing on material composition, origin, properties, and role of the neura in animal bodies; (c) functional association of the neura with a transmitting vehicle; (d) identification of true anatomical and physiological correspondences. Upon this over 2000-year-old foundation is still being built one of the most relevant and fascinating scientific adventures of all time.

Transgenic Overexpression of Abcb11 Enhances Biliary Bile Salt Outputs, But Does Not Affect Cholesterol Cholelithogenesis in Mice

PubMed Central

Wang, Helen H.; Lammert, Frank; Schmitz, Anne; Wang, David Q.-H.

2010-01-01

Background Cholesterol gallstone disease is a complex genetic trait and induced by multiple but as yet unknown genes. A major Lith gene, Lith1 was first identified on chromosome 2 in gallstone-susceptible C57L mice compared with resistant AKR mice. Abcb11, encoding the canalicular bile salt export pump in the hepatocyte, co-localizes with the Lith1 QTL region and its hepatic expression is significantly higher in C57L mice than in AKR mice. Material and methods To investigate whether Abcb11 influences cholesterol gallstone formation, we created an Abcb11 transgenic strain on the AKR genetic background and fed these mice with a lithogenic diet for 56 days. Result We excluded functionally relevant polymorphisms of the Abcb11 gene and its promoter region between C57L and AKR mice. Overexpression of Abcb11 significantly promoted biliary bile salt secretion and increased circulating bile salt pool size and bile salt-dependent bile flow rate. However, biliary cholesterol and phospholipid secretion, as well as gallbladder size and contractility were comparable in transgenic and wild-type mice. At 56 days on the lithogenic diet, cholesterol saturation indexes of gallbladder biles and gallstone prevalence rates were essentially similar in these two groups of mice. Conclusion Overexpression of Abcb11 augments biliary bile salt secretion, but does not affect cholelithogenesis in mice. PMID:20456485

Cooperation, Norms, and Revolutions: A Unified Game-Theoretical Approach

PubMed Central

Helbing, Dirk; Johansson, Anders

2010-01-01

Background Cooperation is of utmost importance to society as a whole, but is often challenged by individual self-interests. While game theory has studied this problem extensively, there is little work on interactions within and across groups with different preferences or beliefs. Yet, people from different social or cultural backgrounds often meet and interact. This can yield conflict, since behavior that is considered cooperative by one population might be perceived as non-cooperative from the viewpoint of another. Methodology and Principal Findings To understand the dynamics and outcome of the competitive interactions within and between groups, we study game-dynamical replicator equations for multiple populations with incompatible interests and different power (be this due to different population sizes, material resources, social capital, or other factors). These equations allow us to address various important questions: For example, can cooperation in the prisoner's dilemma be promoted, when two interacting groups have different preferences? Under what conditions can costly punishment, or other mechanisms, foster the evolution of norms? When does cooperation fail, leading to antagonistic behavior, conflict, or even revolutions? And what incentives are needed to reach peaceful agreements between groups with conflicting interests? Conclusions and Significance Our detailed quantitative analysis reveals a large variety of interesting results, which are relevant for society, law and economics, and have implications for the evolution of language and culture as well. PMID:20967256

Quantitative investigation of a novel small field of view hybrid gamma camera (HGC) capability for sentinel lymph node detection

PubMed Central

Lees, John E; Bugby, Sarah L; Jambi, Layal K; Perkins, Alan C

2016-01-01

Objective: The hybrid gamma camera (HGC) has been developed to enhance the localization of radiopharmaceutical uptake in targeted tissues during surgical procedures such as sentinel lymph node (SLN) biopsy. To assess the capability of the HGC, a lymph node contrast (LNC) phantom was constructed to simulate medical scenarios of varying radioactivity concentrations and SLN size. Methods: The phantom was constructed using two clear acrylic glass plates. The SLNs were simulated by circular wells of diameters ranging from 10 to 2.5 mm (16 wells in total) in 1 plate. The second plate contains four larger rectangular wells to simulate tissue background activity surrounding the SLNs. The activity used to simulate each SLN ranged between 4 and 0.025 MBq. The activity concentration ratio between the background and the activity injected in the SLNs was 1 : 10. The LNC phantom was placed at different depths of scattering material ranging between 5 and 40 mm. The collimator-to-source distance was 120 mm. Image acquisition times ranged from 60 to 240 s. Results: Contrast-to-noise ratio analysis and full-width-at-half-maximum (FWHM) measurements of the simulated SLNs were carried out for the images obtained. Over the range of activities used, the HGC detected between 87.5 and 100% of the SLNs through 20 mm of scattering material and 75–93.75% of the SLNs through 40 mm of scattering material. The FWHM of the detected SLNs ranged between 11.93 and 14.70 mm. Conclusion: The HGC is capable of detecting low accumulation of activity in small SLNs, indicating its usefulness as an intraoperative imaging system during surgical SLN procedures. Advances in knowledge: This study investigates the capability of a novel small-field-of-view (SFOV) HGC to detect low activity uptake in small SLNs. The phantom and procedure described are inexpensive and could be easily replicated and applied to any SFOV camera, to provide a comparison between systems with clinically relevant results. PMID:27537079

Graphene as a protein crystal mounting material to reduce background scatter.

PubMed

Wierman, Jennifer L; Alden, Jonathan S; Kim, Chae Un; McEuen, Paul L; Gruner, Sol M

2013-10-01

The overall signal-to-noise ratio per unit dose for X-ray diffraction data from protein crystals can be improved by reducing the mass and density of all material surrounding the crystals. This article demonstrates a path towards the practical ultimate in background reduction by use of atomically thin graphene sheets as a crystal mounting platform for protein crystals. The results show the potential for graphene in protein crystallography and other cases where X-ray scatter from the mounting material must be reduced and specimen dehydration prevented, such as in coherent X-ray diffraction imaging of microscopic objects.

Graphene as a protein crystal mounting material to reduce background scatter

PubMed Central

Wierman, Jennifer L.; Alden, Jonathan S.; Kim, Chae Un; McEuen, Paul L.; Gruner, Sol M.

2013-01-01

The overall signal-to-noise ratio per unit dose for X-ray diffraction data from protein crystals can be improved by reducing the mass and density of all material surrounding the crystals. This article demonstrates a path towards the practical ultimate in background reduction by use of atomically thin graphene sheets as a crystal mounting platform for protein crystals. The results show the potential for graphene in protein crystallography and other cases where X-ray scatter from the mounting material must be reduced and specimen dehydration prevented, such as in coherent X-ray diffraction imaging of microscopic objects. PMID:24068843

Solar neutrinos as a signal and background in direct-detection experiments searching for sub-GeV dark matter with electron recoils

NASA Astrophysics Data System (ADS)

Essig, Rouven; Sholapurkar, Mukul; Yu, Tien-Tien

2018-05-01

Direct-detection experiments sensitive to low-energy electron recoils from sub-GeV dark matter interactions will also be sensitive to solar neutrinos via coherent neutrino-nucleus scattering (CNS), since the recoiling nucleus can produce a small ionization signal. Solar neutrinos constitute both an interesting signal in their own right and a potential background to a dark matter search that cannot be controlled or reduced by improved shielding, material purification and handling, or improved detector design. We explore these two possibilities in detail for semiconductor (silicon and germanium) and xenon targets, considering several possibilities for the unmeasured ionization efficiency at low energies. For dark-matter-electron-scattering searches, neutrinos start being an important background for exposures larger than ˜1 - 10 kg -years in silicon and germanium, and for exposures larger than ˜0.1 - 1 kg -year in xenon. For the absorption of bosonic dark matter (dark photons and axion-like particles) by electrons, neutrinos are most relevant for masses below ˜1 keV and again slightly more important in xenon. Treating the neutrinos as a signal, we find that the CNS of 8B neutrinos can be observed with ˜2 σ significance with exposures of ˜2 , 7, and 20 kg-years in xenon, germanium, and silicon, respectively, assuming there are no other backgrounds. We give an example for how this would constrain nonstandard neutrino interactions. Neutrino components at lower energy can only be detected if the ionization efficiency is sufficiently large. In this case, observing pep neutrinos via CNS requires exposures ≳10 - 100 kg -years in silicon or germanium (˜1000 kg -years in xenon), and observing CNO neutrinos would require an order of magnitude more exposure. Only silicon could potentially detect 7Be neutrinos. These measurements would allow for a direct measurement of the electron-neutrino survival probability over a wide energy range.

Using Intervention Mapping to develop a programme to prevent sexually transmittable infections, including HIV, among heterosexual migrant men

PubMed Central

Wolfers, Mireille EG; van den Hoek, Caty; Brug, Johannes; de Zwart, Onno

2007-01-01

Background There is little experience with carefully developed interventions in the HIV/STI prevention field aimed at adult heterosexual target groups in the Netherlands. The ability to apply intervention development protocols, like Intervention Mapping, in daily practice outside of academia, is a matter of concern. An urgent need also exists for interventions aimed at the prevention of STI in migrant populations in the Netherlands. This article describes the theory and evidence based development of HIV/STI prevention interventions by the Municipal Public Health Service Rotterdam Area (MPHS), the Netherlands, for heterosexual migrant men with Surinamese, Dutch-Caribbean, Cape Verdean, Turkish and Moroccan backgrounds. Methods First a needs assessment was carried out. Then, a literature review was done, key figures were interviewed and seven group discussions were held. Subsequently, the results were translated into specific objectives ("change objectives") and used in intervention development for two subgroups: men with an Afro-Caribbean background and unmarried men with a Turkish and Moroccan background. A matrix of change objectives was made for each subgroup and suitable theoretical methods and practical strategies were selected. Culturally-tailored interventions were designed and were pre-tested among the target groups. Results This development process resulted in two interventions for specific subgroups that were appreciated by both the target groups and the migrant prevention workers. The project took place in collaboration with a university center, which provided an opportunity to get expert advice at every step of the Intervention Mapping process. At relevant points of the development process, migrant health educators and target group members provided advice and feedback on the draft intervention materials. Conclusion This intervention development project indicates that careful well-informed intervention development using Intervention Mapping is feasible in the daily practice of the MPHS, provided that sufficient time and expertise on this approach is available. Further research should test the effectiveness of these interventions. PMID:17615052

The influence of self-relevant materials on working memory in dysphoric undergraduates.

PubMed

Dai, Qin; Rahman, Shaoon; Lau, Becky; Sook Kim, Hyang; Deldin, Patricia

2015-10-30

Difficulties in updating working memory (WM) may underlie problems with regulating emotions that contribute to depression. To examine the ability of updating affective materials in WM, 33 dysphoric and 34 non-dysphoric participants were asked to evaluate the self-descriptiveness of emotional adjectives and provide answers to self-relevant questions. Within 3-7 days, they completed a two-back task with a series of self-irrelevant or self-relevant emotional words (they had generated previously) and four conditions (match-set, break-set, perseveration-set, and no-set). After the WM task, an unexpected recall task was administered; controls recalled more positive self-relevant words and intrusions while dysphoric participants recalled more negative self-relevant words and intrusions. In break-set trials of the two-back task, dysphoric individuals showed slower response to self-relevant words regardless of valence. In the match-set and perseveration-set trials, dysphoric participants showed delayed response to self-related negative words. Moreover, longer reaction times for self-relevant negative words were correlated with higher rumination and worse depression. The results suggest that dysphoric undergraduates are interfered more by and have a better memory of self-relevant negative stimuli in WM, which is closely correlated with rumination. This study is among the first to confirm the potential mechanism that could underwrite the involvement of self-schema in effectively regulating negative affect. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Pesticide Program Dialogue Committee - June 5-6, 2014 Materials

EPA Pesticide Factsheets

This PPDC meeting included sessions on the budget, 21st century toxicity testing, polllinator protection, school IPM, and the endocrine disruptor screening program. View presentation materials for those topics plus other background materials and updates.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chiaro, P.J.

A series of tests were performed at Oak Ridge National Laboratory (ORNL) to evaluate and characterize the radiological response of a ''Cricket'' radiation detection system. The ''Cricket'' is manufactured by RAD/COMM Systems Corp., which is located in Ontario, Canada. The system is designed to detect radioactive material that may be contained in scrap metal. The Cricket's detection unit is mounted to the base of a grappler and monitors material, while the grappler's tines hold the material. It can also be used to scan material in an attempt to isolate radioactive material if an alarm occurs. Testing was performed at themore » Environmental Effects Laboratory located at ORNL and operated by the Engineering Science and Technology Division. Tests performed included the following: (1) Background stability, (2) Energy response using {sup 241}Am, {sup 137}Cs, and {sup 60}Co, (3) Surface uniformity, (4) Angular dependence, (5) Alarm actuation, (6) Alarm threshold vs. background, (7) Shielding, (8) Response to {sup 235}U, (9) Response to neutrons using unmoderated {sup 252}Cf, and (10) Response to transient radiation. This report presents a summary of the test results. Background measurements were obtained prior to the performance of each individual test.« less

Recent Advances in the Synthesis of High Explosive Materials

DTIC Science & Technology

2015-12-29

explosives and secondary high explosives, and the sensitivities and properties of these molecules are provided. In addition to the synthesis of such materials...This review discusses the recent advances in the syntheses of high explosive energetic materials. Syntheses of some relevant modern primary

Recommended Best Practices for the Characterization of Storage Properties of Hydrogen Storage Materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2010-03-01

This is a reference guide to common methodologies and protocols for measuring critical performance properties of advanced hydrogen storage materials. It helps users to communicate clearly the relevant performance properties of new materials as they are discovered and tested.

Ethnic identity and the academic adjustment of adolescents from Mexican, Chinese, and European backgrounds.

PubMed

Fuligni, Andrew J; Witkow, Melissa; Garcia, Carla

2005-09-01

The association of adolescents' ethnic identification with their academic attitudes and achievement was examined among a sample of 589 ninth-grade students from Mexican, Chinese, and European backgrounds. Adolescents from all backgrounds chose a variety of ethnic labels to describe themselves, with those from Mexican, Chinese, and immigrant families incorporating more of their families' national origin and cultural background into their chosen ethnic labels. Nevertheless, the strength of adolescents' ethnic identification was more relevant to their academic adjustment than the specific labels that they chose, and it was most important for the extra motivation necessary for ethnic minority students to attain the same level of academic success as their European American peers. Copyright 2005 APA, all rights reserved.

Selective and cost-effective protocol to separate bioactive triterpene acids from plant matrices using alkalinized ethanol: Application to leaves of Myrtaceae species

PubMed Central

Lima, Adélia M. Belem; Siani, Antonio Carlos; Nakamura, Marcos Jun; D’Avila, Luiz Antonio

2015-01-01

Background: Triterpenes as betulinic (BA), oleanolic (OA) and ursolic acids (UA) have increasingly gained therapeutic relevance due to their wide scope of pharmacological activities. To fit large-scale demands, exploitable sources of these compounds have to be found and simple, cost-effective methods to extract them developed. Leaf material represents the best plant sustainable raw material. To obtain triterpene acid-rich extracts from leaves of Eugenia, Psidium and Syzygium species (Myrtaceae) by directly treating the dry plant material with alkalinized hydrated ethanol. This procedure was adapted from earlier methods to effect depolymerization of the leaf cutin. Materials and Methods: Extracts were prepared by shaking the milled dry leaves in freshly prepared 2% NaOH in 95% EtOH solution (1:4 w/v) at room temperature for 6 h. Working up the product in acidic aqueous medium led to clear precipitates in which BA, OA and UA were quantified by gas chromatography. Results: Pigment-free and low-polyphenol content extracts (1.2–2.8%) containing 6–50% of total triterpene acids were obtained for the six species assayed. UA (7–20%) predominated in most extracts, but BA preponderated in Eugenia florida (39%). Carried out in parallel, n-hexane defatted leaves led to up to 9% enhancement of total acids in the extracts. The hydroalcoholate treatment of Myrtaceae species dry leaves proved to be a cost-effective and environmentally friendly method to obtain triterpene acids, providing them be resistant to alkaline medium. These combined techniques might be applicable to other plant species and tissues. PMID:26246721

Assessing the impact of background spectral graph construction techniques on the topological anomaly detection algorithm

NASA Astrophysics Data System (ADS)

Ziemann, Amanda K.; Messinger, David W.; Albano, James A.; Basener, William F.

2012-06-01

Anomaly detection algorithms have historically been applied to hyperspectral imagery in order to identify pixels whose material content is incongruous with the background material in the scene. Typically, the application involves extracting man-made objects from natural and agricultural surroundings. A large challenge in designing these algorithms is determining which pixels initially constitute the background material within an image. The topological anomaly detection (TAD) algorithm constructs a graph theory-based, fully non-parametric topological model of the background in the image scene, and uses codensity to measure deviation from this background. In TAD, the initial graph theory structure of the image data is created by connecting an edge between any two pixel vertices x and y if the Euclidean distance between them is less than some resolution r. While this type of proximity graph is among the most well-known approaches to building a geometric graph based on a given set of data, there is a wide variety of dierent geometrically-based techniques. In this paper, we present a comparative test of the performance of TAD across four dierent constructs of the initial graph: mutual k-nearest neighbor graph, sigma-local graph for two different values of σ > 1, and the proximity graph originally implemented in TAD.

Culturally relevant HIV interventions: transcending ethnicity.

PubMed

DeMarco, Rosanna; Norris, Anne E

2004-01-01

Over the last 2 years, the co-authors produced an HIV prevention film for teens in collaboration with four African American women living with HIV. However, there were initially concerns that the experiences and prevention messages in the film would not be relevant to women of other cultures and ethnic backgrounds. Pretesting of the film was completed with African American and Latina teen girls; adult women who were HIV providers of various ethnicities and cultures; and adult Latina, Cape Verdean, and White women as well as adult Haitian men and women. Findings indicated that cultural relevance was strong for individuals who shared gender identity and socioeconomic status.

[Understanding and intervention: a dimension of collaboration of anthropology and epidemiology].

PubMed

Song, Lei-Ming; Wang, Ning

2012-10-01

'Epidemiological intervention' involves many social and cultural contents and can be recognized as a social cultural practice. If we know more about the relevant social cultural background of the objects on intervention measures and intervention, the goals would more successful and effective be reached. Since anthropology is specialized in understanding relevant social and cultural contents, the understanding of anthropology should be viewed both as important prerequisite and foundation of the epidemiological intervention programs.

Material Barriers to Diffusive Mixing

NASA Astrophysics Data System (ADS)

Haller, George; Karrasch, Daniel

2017-11-01

Transport barriers, as zero-flux surfaces, are ill-defined in purely advective mixing in which the flux of any passive scalar is zero through all material surfaces. For this reason, Lagrangian Coherent Structures (LCSs) have been argued to play the role of mixing barriers as most repelling, attracting or shearing material lines. These three kinematic concepts, however, can also be defined in different ways, both within rigorous mathematical treatments and within the realm of heuristic diagnostics. This has lead to a an ever-growing number of different LCS methods, each generally identifying different objects as transport barriers. In this talk, we examine which of these methods have actual relevance for diffusive transport barriers. The latter barriers are arguably the practically relevant inhibitors in the mixing of physically relevant tracers, such as temperature, salinity, vorticity or potential vorticity. We demonstrate the role of the most effective diffusion barriers in analytical examples and observational data. Supported in part by the DFG Priority Program on Turbulent Superstructures.

Piezoelectric polymers as biomaterials for tissue engineering applications.

PubMed

Ribeiro, Clarisse; Sencadas, Vítor; Correia, Daniela M; Lanceros-Méndez, Senentxu

2015-12-01

Tissue engineering often rely on scaffolds for supporting cell differentiation and growth. Novel paradigms for tissue engineering include the need of active or smart scaffolds in order to properly regenerate specific tissues. In particular, as electrical and electromechanical clues are among the most relevant ones in determining tissue functionality in tissues such as muscle and bone, among others, electroactive materials and, in particular, piezoelectric ones, show strong potential for novel tissue engineering strategies, in particular taking also into account the existence of these phenomena within some specific tissues, indicating their requirement also during tissue regeneration. This referee reports on piezoelectric materials used for tissue engineering applications. The most used materials for tissue engineering strategies are reported together with the main achievements, challenges and future needs for research and actual therapies. This review provides thus a compilation of the most relevant results and strategies and a start point for novel research pathways in the most relevant and challenging open questions. Copyright © 2015 Elsevier B.V. All rights reserved.

Emittance Measurements Relevant to a 250 W(sub t) Class RTPV Generator for Space Exploration

NASA Technical Reports Server (NTRS)

Wolford, Dave; Chubb, Donald; Clark, Eric; Pal, Anna Maria; Scheiman, Dave; Colon, Jack

2009-01-01

A proposed 250 Wt Radioisotope Thermophotovoltaic (RTPV) power system for utilization in lunar exploration and the subsequent exploration of Mars is described. Details of emitter selection are outlined for use in a maintenance free power supply that is productive over a 14-year mission life. Thorough knowledge of a material s spectral emittance is essential for accurate modeling of the RTPV system. While sometimes treated as a surface effect, emittance involves radiation from within a material. This creates a complex thermal gradient which is a combination of conductive and radiative heat transfer mechanisms. Emittance data available in the literature is a valuable resource but it is particular to the test sample s physical characteristics and the test environment. Considerations for making spectral emittance measurements relevant to RTPV development are discussed. Measured spectral emittance data of refractory emitter materials is given. Planned measurement system modifications to improve relevance to the current project are presented.

Review of the Theoretical and Experimental Status of Dark Matter Identification with Cosmic-Ray Antideuterons

NASA Technical Reports Server (NTRS)

Aramaki, T.; Boggs, S.; Bufalino, S.; Dal, L.; von Doetinchem, P.; Donato, F.; Fornengo, N.; Fuke, H.; Grefe, M.; Hailey, C.;

USGS Training in Afghanistan: Modern Earthquake Hazards Assessments

NASA Astrophysics Data System (ADS)

Medlin, J. D.; Garthwaite, M.; Holzer, T.; McGarr, A.; Bohannon, R.; Bergen, K.; Vincent, T.

2007-05-01

Afghanistan is located in a tectonically active region where ongoing deformation has generated rugged mountainous terrain, and where large earthquakes occur frequently. These earthquakes can present a significant hazard, not only from strong ground shaking, but also from liquefaction and extensive land sliding. The magnitude 6.1 earthquake of March 25, 2002 highlighted the vulnerability of Afghanistan to such hazards, and resulted in over 1000 fatalities. The USGS has provided the first of a series of Earth Science training courses to the Afghan Geological Survey (AGS). This course was concerned with modern earthquake hazard assessments, and is an integral part of a larger USGS effort to provide a comprehensive seismic-hazard assessment for Afghanistan. Funding for these courses is provided by the US Agency for International Development Afghanistan Reconstruction Program. The particular focus of this training course, held December 2-6, 2006 in Kabul, was on providing a background in the seismological and geological methods relevant to preparing for future earthquakes. Topics included identifying active faults, modern tectonic theory, geotechnical measurements of near-surface materials, and strong-motion seismology. With this background, participants may now be expected to educate other members of the community and be actively involved in earthquake hazard assessments themselves. The December, 2006, training course was taught by four lecturers, with all lectures and slides being presented in English and translated into Dari. Copies of the lectures were provided to the students in both hardcopy and digital formats. Class participants included many of the section leaders from within the AGS who have backgrounds in geology, geophysics, and engineering. Two additional training sessions are planned for 2007, the first entitled "Modern Concepts in Geology and Mineral Resource Assessments," and the second entitled "Applied Geophysics for Mineral Resource Assessments."

Review of the theoretical and experimental status of dark matter identification with cosmic-ray antideuterons

DOE PAGES

Aramaki, T.; Boggs, S.; Bufalino, S.; ...

2016-01-27

Recent years have seen increased theoretical and experimental effort towards the first-ever detection of cosmic-ray antideuterons, in particular as an indirect signature of dark matter annihilation or decay. In contrast to indirect dark matter searches using positrons, antiprotons, or γ-rays, which suffer from relatively high and uncertain astrophysical backgrounds, searches with antideuterons benefit from very suppressed conventional backgrounds, offering a potential breakthrough in unexplored phase space for dark matter. This article is based on the first dedicated cosmic-ray antideuteron workshop, which was held at UCLA in June 2014. It reviews broad classes of dark matter candidates that result in detectablemore » cosmic-ray antideuteron fluxes, as well as the status and prospects of current experimental searches. The coalescence model of antideuteron production and the influence of antideuteron measurements at particle colliders are discussed. This is followed by a review of the modeling of antideuteron propagation through the magnetic fields, plasma currents, and molecular material of our Galaxy, the solar system, the Earth’s geomagnetic field, and the atmosphere. Lastly, the three ongoing or planned experiments that are sensitive to cosmic-ray antideuterons, BESS, AMS-02, and GAPS, are detailed. As cosmic-ray antideuteron detection is a rare event search, multiple experiments with orthogonal techniques and backgrounds are essential. Furthermore, the combination of AMS-02 and GAPS antideuteron searches is highly desirable. Many theoretical and experimental groups have contributed to these studies over the last decade, this review aims to provide the first coherent discussion of the relevant dark matter theories that antideuterons probe, the challenges to predictions and interpretations of antideuteron signals, and the experimental efforts toward cosmic antideuteron detection.« less

The Concept of Culture. Teacher's Background Material for the American, the Arunta, the Kazak. Grade One and Grade Four. Publications No. 3, 4 and 5.

ERIC Educational Resources Information Center

Hunt, Anne; And Others

This guide presents background material to acquaint elementary social studies teachers with the cultural systems of the Arunta and Kazak tribes and the more technologically sophisticated American way of life. It is part of the Anthropology Curriculum Project and is designed to be used in conjunction with curriculum guides for grades 1 and 4 (SO…

The influence of animal fear on attentional capture by fear-relevant animal stimuli in children.

PubMed

Waters, Allison M; Lipp, Ottmar V

2008-01-01

The present study demonstrated that pictures of fear-relevant animals, snakes and spiders, presented among backgrounds of other animal stimuli captured attention and interfered in the detection of a neutral target to the same extent in a large sample of unselected children (N=81). Moreover, detection of a neutral target animal was slowed more in the presence of a feared fear-relevant distracter, e.g., a snake for snake fearful children, than in the presence of a not feared fear-relevant distracter, e.g., a spider for snake fearful children. These results indicate attentional capture by phylogenetically fear-relevant animal stimuli in children and the selective enhancement of this effect by fear of these animals. These findings are consistent with current models of preferential processing of phylogenetically prepared threat stimuli and with cognitive models of anxiety that propose an enhancing effect of fear in the processing of fear-related stimuli.

Radioactivities of Long Duration Exposure Facility (LDEF) materials: Baggage and bonanzas

NASA Technical Reports Server (NTRS)

Smith, Alan R.; Hurley, Donna L.

1992-01-01

Radioactivities in materials onboard the returned Long Duration Exposure Facility (LDEF) satellite were studied by a variety of techniques. Among the most powerful is low-background Ge-semiconductor detector gamma-ray spectrometry, illustrated here by results obtained at the Lawrence Berkeley Laboratory's (LBL) Low Background Facilities. The observed radioactivities are of two origins: those radionuclides produced by nuclear reactions with the radiation field in orbit, and radionuclides present initially as 'contaminants' in materials used for construction of the spacecraft and experimental assemblies. In the first category are experiment-related monitor foils and tomato seeds, and such spacecraft materials as aluminum, stainless steel, and titanium. In the second category are aluminum, beryllium, titanium, vanadium, and some special glasses.

Backgrounds in Language.

ERIC Educational Resources Information Center

Maxwell, John C.; Long, Barbara K.

"Backgrounds in Language," a field-tested inservice course designed for use by groups of 15 or 25 language arts teachers, provides the subject matter background teachers need to make informed decisions about what curriculum materials to use in what way, at what time, and with which students. The course is comprised of eight 2-hour sessions,…

Low-background Gamma Spectroscopy at Sanford Underground Laboratory

NASA Astrophysics Data System (ADS)

Chiller, Christopher; Alanson, Angela; Mei, Dongming

2014-03-01

Rare-event physics experiments require the use of material with unprecedented radio-purity. Low background counting assay capabilities and detectors are critical for determining the sensitivity of the planned ultra-low background experiments. A low-background counting, LBC, facility has been built at the 4850-Level Davis Campus of the Sanford Underground Research Facility to perform screening of material and detector parts. Like many rare event physics experiments, our LBC uses lead shielding to mitigate background radiation. Corrosion of lead brick shielding in subterranean installations creates radon plate-out potential as well as human risks of ingestible or respirable lead compounds. Our LBC facilities employ an exposed lead shield requiring clean smooth surfaces. A cleaning process of low-activity silica sand blasting and borated paraffin hot coating preservation was employed to guard against corrosion due to chemical and biological exposures. The resulting lead shield maintains low background contribution integrity while fully encapsulating the lead surface. We report the performance of the current LBC and a plan to develop a large germanium well detector for PMT screening. Support provided by Sd governors research center-CUBED, NSF PHY-0758120 and Sanford Lab.

Cosmic microwave background constraints on primordial black hole dark matter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aloni, Daniel; Blum, Kfir; Flauger, Raphael, E-mail: daniel.aloni@weizmann.ac.il, E-mail: kfir.blum@weizmann.ac.il, E-mail: flauger@physics.ucsd.edu

We revisit cosmic microwave background (CMB) constraints on primordial black hole dark matter. Spectral distortion limits from COBE/FIRAS do not impose a relevant constraint. Planck CMB anisotropy power spectra imply that primordial black holes with m {sub BH}∼> 5 M {sub ⊙} are disfavored. However, this is susceptible to sizeable uncertainties due to the treatment of the black hole accretion process. These constraints are weaker than those quoted in earlier literature for the same observables.

Using video to introduce clinical materials.

PubMed

Kommalage, Mahinda; Senadheera, Chandanie

2012-08-01

The early introduction of clinical material is a recognised strategy in medical education. The University of Ruhana Medical School, where a traditional curriculum is followed, offers students pre-clinical subjects without clinical exposure during their first and second years. Clinical materials in the form of videos were introduced to first-year students. In the videos, patients and their relatives described the diseases and related problems. Students were instructed to identify the problems encountered by patients and relatives. Each video was followed by a discussion of the problems identified by the students. The medical, social and economic problems encountered by patients and relatives were emphasised during post-video discussions. A lecture was conducted linking the contents of the videos to subsequent lectures. The aim of this study is to investigate whether combining teaching preclinical material with a video presentation of relevant clinical cases facilitates the interest and understanding of students. Quantitative data were collected using a questionnaire, whereas qualitative data were collected using focus group discussions. Quantitative data showed that students appreciated the video, had 'better' knowledge acquisition and a 'better' understanding of problems encountered by patients. Qualitative analysis highlighted the following themes: increased interest; enhanced understanding; relevance of basic knowledge to clinical practice; orientation to profession; and personalising theories. The introduction of patients in the form of videos helped students to understand the relevance of subject material for clinical practice, increased their interest and facilitated a better understanding of the subject material. Therefore, it seems video is a feasible medium to introduce clinical materials to first-year students who follow a traditional curriculum in a resource-limited environment. © Blackwell Publishing Ltd 2012.

A guideline to medical photography: a perspective on digital photography in an orthopaedic setting.

PubMed

de Meijer, P P G; Karlsson, J; LaPrade, R F; Verhaar, J A N; Wijdicks, C A

2012-12-01

Quality photographs are essential for clinical documentation, research, and publication in scientific journals and teaching. Oftentimes, non-ideal lighting and a sterile environment restrict the medical photographer, resulting in lower-quality photographs. This article aims to provide a clear and comprehensible guideline for medical photography in an orthopaedic setting. This article is based on extensive photographic involvement in operating and laboratory settings, in close collaboration with medical professionals from the Steadman Clinic (Vail, Colorado, USA), Gothenburg University (Göteborg, Sweden) and Erasmus MC (Rotterdam, the Netherlands). Background literature was searched through Google Scholar and PubMed. Three relevant journal articles, and one book on medical photography, were used to write this paper. Seventeen Internet articles were used for background information. A relevant, up-to-date and comprehensive guideline to medical photography for medical professionals, with or without photographic experience, is provided. Expert opinion, Level V.

Explaining the Muslim employment gap in Western Europe: individual-level effects and ethno-religious penalties.

PubMed

Connor, Phillip; Koenig, Matthias

2015-01-01

It is well-documented that Muslims experience economic disadvantages in Western European labor markets. However, few studies comprehensively test individual-level explanations for the Muslim employment gap. Using data from the European Social Survey, this research note briefly examines the role of individual-level differences between Muslims and non-Muslims in mediating employment differences. Results reveal that human capital, migration background, religiosity, cultural values, and perceptions of discrimination jointly account for about 40% of the employment variance between Muslims and non-Muslims. Model specifications for first- and second-generation Muslim immigrants reveal a similar pattern, with migration background and perceived discrimination being of key relevance in mediating employment difference. While individual-level effects are indeed relevant, unexplained variance suggests that symbolic boundaries against Islam may still translate into tangible ethno-religious penalties. Copyright © 2014 Elsevier Inc. All rights reserved.

Material Demand Studies: Materials Sorption of Vaporized Hydrogen Peroxide

DTIC Science & Technology

2010-06-01

SORPTION OF VAPORIZED HYDROGEN PEROXIDE Lawrence R. Procell Zoe A. Hess David G. Gehring Joseph T. Lynn Philip W. Bartram Teri Lalain RESEARCH AND...2010 2. REPORT TYPE Final 3. DATES COVERED (From - To) Nov 2003 - Jul 2005 4. TITLE AND SUBTITLE Material Demand Studies: Materials Sorption of...of office surfaces 33 \\i MATERIAL DEMAND STUDIES: MATERIALS SORPTION OF VAPORIZED HYDROGEN PEROXIDE 1. BACKGROUND The Material Demand effort was

MPA-11: Materials Synthesis and Integrated Devices; Overview of an Applied Energy Group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dattelbaum, Andrew Martin

Our mission is to provide innovative and creative chemical synthesis and materials science solutions to solve materials problems across the LANL missions. Our group conducts basic and applied research in areas related to energy security as well as problems relevant to the Weapons Program.

Some relations among engineering constants of wood

Treesearch

Jen Y. Liu; Robert J. Ross

1998-01-01

Wood may be described as an orthotropic material with unique and independent mechanical properties in the directions of three mutually perpendicular axes– longitudinal ( L ), radial ( R ), and tangential (T ). These mechanical properties are also called engineering constants. Orthotropic materials are of special relevance to composite materials. Therefore, mathematical...

Selected Materials on Drug Abuse and Misuse.

ERIC Educational Resources Information Center

Vigo County Public Library, Terre Haute, IN.

The Vigo County Public Library has a Center for Drug Information which contains pamphlets, leaflets, newsletters, realia kits, films, records, cassettes, slides, educational aids and other materials on drug use, abuse and education. The materials in this list were selected for their relevance to the needs of local groups and organizations in…

The global radioxenon background and its impact on the detection capability of underground nuclear explosions (Invited)

NASA Astrophysics Data System (ADS)

Ringbom, A.

2010-12-01

A detailed knowledge of both the spatial and isotopic distribution of anthropogenic radioxenon is essential in investigations of the performance of the radioxenon part of the IMS, as well as in the development of techniques to discriminate radioxenon signatures from a nuclear explosion from other sources. Further, the production processes in the facilities causing the radioxenon background has to be understood and be compatible with simulations. In this work, several aspects of the observed atmospheric radioxenon background are investigated, including the global distribution as well as the current understanding of the observed isotopic ratios. Analyzed radioxenon data from the IMS, as well as from other measurement stations, are used to create an up-to-date description of the global radioxenon background, including all four CTBT relevant xenon isotopes (133Xe, 131mXe, 133mXe, and 135Xe). In addition, measured isotopic ratios will be compared to simulations of neutron induced fission of 235U, and the uncertainties will be discussed. Finally, the impact of the radioxenon background on the detection capability of the IMS will be investigated. This work is a continuation of studies [1,2] that was presented at the International Scientific Studies conference held in Vienna in 2009. [1] A. Ringbom, et.al., “Characterization of the global distribution of atmospheric radioxenons”, International Scientific Studies Conference on CTBT Verification, 10-12 June 2009. [2] R. D'Amours and A. Ringbom, “A study on the global detection capability of IMS for all CTBT relevant xenon isotopes“, International Scientific Studies Conference on CTBT Verification, 10-12 June 2009.

Negative refraction in one- and two-dimensional lossless plasma dielectric photonic crystals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, B.

2013-07-15

Negative refraction in one- and two-dimensional lossless plasma dielectric photonic crystals consisting of plasma and background materials is theoretically investigated and the necessary conditions for negative refraction in these two structures are obtained. The critical frequency ω{sub 0} and the bandwidth Δω for negative refraction are explored, and the parameter dependence of effects such as plasma filling factor and the dielectric constant of background materials is also examined and discussed.

Tribology of magnetic storage systems

NASA Technical Reports Server (NTRS)

Bhushan, Bharat

1992-01-01

The construction and the materials used in different magnetic storage devices are defined. The theories of friction and adhesion, interface temperatures, wear, and solid-liquid lubrication relevant to magnetic storage systems are presented. Experimental data are presented wherever possible to support the relevant theories advanced.

Mitigation of Hot Electrons from Laser-Plasma Instabilities in Laser-Generated X-Ray Sources

NASA Astrophysics Data System (ADS)

Fein, Jeffrey R.

This thesis describes experiments to understand and mitigate energetic or "hot" electrons from laser-plasma instabilities (LPIs) in an effort to improve radiographic techniques using laser-generated x-ray sources. Initial experiments on the OMEGA-60 laser show evidence of an underlying background generated by x-rays with energies over 10 keV on radiographs using backlit pinhole radiography, whose source is consistent with hard x-rays from LPI-generated hot electrons. Mitigating this background can dramatically reduce uncertainties in measured object densities from radiographs and may be achieved by eliminating the target components in which LPIs are most likely to grow. Experiments were performed on the OMEGA-EP laser to study hot electron production from laser-plasma instabilities in high-Z plasmas relevant to laser-generated x-ray sources. Measurements of hard x-rays show a dramatic reduction in hot-electron energy going from low-Z CH to high-Z Au targets, in a manner that is consistent with steepening electron density profiles that were also measured. The profile-steepening, we infer, increased thresholds of LPIs and contributed to the reduced hot-electron production at higher Z. Possible mechanisms for generating hot electrons include the two-plasmon decay and stimulated Raman scattering instabilities driven by multiple laser beams. Radiation hydrodynamic simulations using the CRASH code predict that both of these instabilities were above threshold with linear threshold parameters that decreased with increasing Z due to steepening length-scales, as well as enhanced laser absorption and increased collisional and Landau damping of electron plasma waves. Another set of experiments were performed on the OMEGA-60 laser to test whether hard x-ray background could be mitigated in backlit pinhole imagers by controlling laser-plasma instabilities. Based on the results above, we hypothesized that LPIs and hot electrons that lead to hard x-ray background would be reduced by increasing the atomic number of the irradiated components in the pinhole imagers. Using higher-Z materials we demonstrate significant reduction in x-rays between 30-70 keV and 70% increase in the signal-to-background ratio. Based on this, a proposed backlighter and detector setup predicts a signal-to-background ratio of up to 4.5:1.

Role of Outgassing of ITER Vacuum Vessel In-Wall Shielding Materials in Leak Detection of ITER Vacuum Vessel

NASA Astrophysics Data System (ADS)

Maheshwari, A.; Pathak, H. A.; Mehta, B. K.; Phull, G. S.; Laad, R.; Shaikh, M. S.; George, S.; Joshi, K.; Khan, Z.

2017-04-01

ITER Vacuum Vessel is a torus-shaped, double wall structure. The space between the double walls of the VV is filled with In-Wall Shielding Blocks (IWS) and Water. The main purpose of IWS is to provide neutron shielding during ITER plasma operation and to reduce ripple of Toroidal Magnetic Field (TF). Although In-Wall Shield Blocks (IWS) will be submerged in water in between the walls of the ITER Vacuum Vessel (VV), Outgassing Rate (OGR) of IWS materials plays a significant role in leak detection of Vacuum Vessel of ITER. Thermal Outgassing Rate of a material critically depends on the Surface Roughness of material. During leak detection process using RGA equipped Leak detector and tracer gas Helium, there will be a spill over of mass 3 and mass 2 to mass 4 which creates a background reading. Helium background will have contribution of Hydrogen too. So it is necessary to ensure the low OGR of Hydrogen. To achieve an effective leak test it is required to obtain a background below 1 × 10-8 mbar 1 s-1 and hence the maximum Outgassing rate of IWS Materials should comply with the maximum Outgassing rate required for hydrogen i.e. 1 x 10-10 mbar 1 s-1 cm-2 at room temperature. As IWS Materials are special materials developed for ITER project, it is necessary to ensure the compliance of Outgassing rate with the requirement. There is a possibility of diffusing the gasses in material at the time of production. So, to validate the production process of materials as well as manufacturing of final product from this material, three coupons of each IWS material have been manufactured with the same technique which is being used in manufacturing of IWS blocks. Manufacturing records of these coupons have been approved by ITER-IO (International Organization). Outgassing rates of these coupons have been measured at room temperature and found in acceptable limit to obtain the required Helium Background. On the basis of these measurements, test reports have been generated and got approved by IO. This paper will describe the preparation, characteristics and cleaning procedure of samples, description of the system, Outgassing rate Measurement of these samples to ensure the accurate leak detection.

Clinical relevance of the ESKAPE pathogens.

PubMed

Pendleton, Jack N; Gorman, Sean P; Gilmore, Brendan F

2013-03-01

In recent years, the Infectious Diseases Society of America has highlighted a faction of antibiotic-resistant bacteria (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa and Enterobacter spp.) - acronymically dubbed 'the ESKAPE pathogens' - capable of 'escaping' the biocidal action of antibiotics and mutually representing new paradigms in pathogenesis, transmission and resistance. This review aims to consolidate clinically relevant background information on the ESKAPE pathogens and provide a contemporary summary of bacterial resistance, alongside pertinent microbiological considerations necessary to face the mounting threat of antimicrobial resistance.

T-wave alternans and beat-to-beat variability of repolarization: pathophysiological backgrounds and clinical relevance.

PubMed

Floré, Vincent; Willems, Rik

2012-12-01

In this review, we focus on temporal variability of cardiac repolarization. This phenomenon has been related to a higher risk for ventricular arrhythmia and is therefore interesting as a marker of sudden cardiac death risk. We review two non-invasive clinical techniques quantifying repolarization variability: T-wave alternans (TWA) and beat-to-beat variability of repolarization (BVR). We discuss their pathophysiological link with ventricular arrhythmia and the current clinical relevance of these techniques.

Shaped Charge Liner Materials: Resources, Processes, Properties, Costs, and Applications

DTIC Science & Technology

1991-02-01

SUBTITLE 5. FUNDING NUMBERS Shaped Charge Liner Materials: Resources, Processes, Properties, Costs, and Applications 2 6. AUTHOC Steven M. Buc 7...summaries of the mineral availability, Cq prmarymetal refinement processeb, material costs in raw form and as finished shaped charge liners , relevant... liner materials. 94-11479 gI 14, SUBJECT TERMS iSt NUMBER OF PAGIS 13chrg wrhad :xplosively formed penetrators material R. PRCE COEV" processing

The use of foresight methods in strategic raw materials intelligence - an international review

NASA Astrophysics Data System (ADS)

Konrat Martins, Marco Antonio; Bodo, Balazs; Falck, Eberhard

2017-04-01

Foresight methods are systematic attempts to look into the longer term future of science, society, economy and technology. There is a range of tools and techniques that can be used individually or combined, most commonly classified into qualitative, quantitative or semi-quantitative methods, that follow an exploratory or normative approach. These tools can help to identify the longer term visions, orienting policy formulation and decisions, triggering actions, among other objectives. There is an identified lack of European strategic foresight knowledge in the raw materials domain. Since the European Raw Materials Initiative was launched in 2008, the EU has been attempting to overcome challenges related to the future access of non-energy and non-agricultural raw materials. In this context, the ongoing H2020 project, MICA (Mineral Intelligence Capacity Analysis, Grant Agreement No. 689648), has been launched to answer to stakeholders needs by consolidating relevant data, determining relevant methods and tools, and investigating Raw Materials Intelligence options for European mineral policy development, all tailored to fit under the umbrella of a European Raw Materials Intelligence Capacity Platform (EU-RMICP). As part of the MICA activities, an assessment of best practices and benchmarks of international raw materials foresight case studies has been carried out in order to review how EU and non-EU countries have employed foresight. A pool of 30 case studies has been collected and reviewed internationally, one third of which were selected for detailed assessment. These were classified according to their background and goals, in function of methods employed, and to the purpose of each method in the study: a total of 12 different methods were identified in these studies. For longer time frames, qualitative predictive methods such as Scenario Development have been repeatedly observed for mineral raw materials foresight studies. Substantial variations were observed in terms of use and deployment of the scenarios. Pre-defined global scenarios can be used to explore futures thinking over a given theme - a step in the process - whereas the development of specific scenarios can be the main element of the study. The former was used to consider future strategies at different levels and how different futures influence the sector, whilst the latter was preferably used as means of assessment of sector capabilities and the current readiness for future challenges. Other methods such as SWOT, STEEP (Social, Technological, Economical, Environmental and Political scanning) and Brainstorming can be observed supporting the Scenarios, helping to provide either input for its development or post-processing its outcomes towards overall objectives. The volatility of the mineral raw materials sector presents a natural inclination towards more explorative and creativity-based methods. Such methods can address the necessity of understanding how different factors may play out in the future, where critical uncertainties can dictate a range of possible futures. Therefore, having a solid backdrop for alternative paths is extremely useful for policy and decision-makers to propose actions and respond in a timely manner to the future challenges of the sector.

Recycled Art: Create Puppets Using Recycled Objects.

ERIC Educational Resources Information Center

Clearing, 2003

2003-01-01

Presents an activity from "Healthy Foods from Healthy Soils" for making puppets using recycled food packaging materials. Includes background information, materials, instructions, literature links, resources, and benchmarks. (NB)

Health promotion programme design and efficacy in relation to ageing persons with culturally and linguistically diverse backgrounds: a systematic literature review and meta-analysis.

PubMed

Lood, Qarin; Häggblom-Kronlöf, Greta; Dahlin-Ivanoff, Synneve

2015-12-16

Health promotion has the potential to empower people to develop or maintain healthy lifestyles. However, previous research has visualised serious health and healthcare inequities associated with ageing, cultural affiliations and linguistic preferences. Therefore, this study was part of a larger health promotion project, set out to bridge barriers to health for ageing persons who have migrated to Sweden. More specifically, the present study aimed to elucidate the content and effects of multidimensional health promotion programmes in the context of ageing persons with culturally and linguistically diverse backgrounds. Databases were systematically searched to identify relevant randomised controlled trial publications. All potentially relevant publications were assessed for relevance and design and after this screening, a final sample of eight publications could be included in the review. Those publications evaluated six different programmes and a mixed-methods approach to data analysis was applied, using a combination of narrative synthesis, meta-analyses and evidence grading. The findings suggest a multidimensional health promotion programme design for ageing persons with culturally and linguistically diverse backgrounds, involving culturally and linguistically modified activities and health information that should be provided by professionals with a person-centred approach. In addition, the meta-analyses revealed statistically significant effects in favour of health promotion on: general health, depression, mental health, physical health, and vitality. However, the evidence for the identified effects is low, and further research findings are likely to change the estimations. The present study provides an aggregation of health promotion intervention research with older persons with culturally and linguistically diverse backgrounds; a group of people who are commonly excluded from research, and marginalised when it comes to health and healthcare. By visualising the core components of health promotion programmes with proven efficacy, the findings provide guidance for further explorations of how health promotion should be designed to minimise inequities in health.

Scanning Capacitance Microscopy | Materials Science | NREL

Science.gov Websites

obtained using scanning capacitance microscopy. Top Right: Image of p-type and n-type material, obtained 'fingers' of light-colored n-type material on a yellow and blue background representing p-type material ; measurement data were obtained using scanning capacitance microscopy. Bottom Right: Image of p-type and n-type

Comparison of three web-scale discovery services for health sciences research.

PubMed

Hanneke, Rosie; O'Brien, Kelly K

2016-04-01

The purpose of this study was to investigate the relative effectiveness of three web-scale discovery (WSD) tools in answering health sciences search queries. Simple keyword searches, based on topics from six health sciences disciplines, were run at multiple real-world implementations of EBSCO Discovery Service (EDS), Ex Libris's Primo, and ProQuest's Summon. Each WSD tool was evaluated in its ability to retrieve relevant results and in its coverage of MEDLINE content. All WSD tools returned between 50%-60% relevant results. Primo returned a higher number of duplicate results than the other 2 WSD products. Summon results were more relevant when search terms were automatically mapped to controlled vocabulary. EDS indexed the largest number of MEDLINE citations, followed closely by Summon. Additionally, keyword searches in all 3 WSD tools retrieved relevant material that was not found with precision (Medical Subject Headings) searches in MEDLINE. None of the 3 WSD products studied was overwhelmingly more effective in returning relevant results. While difficult to place the figure of 50%-60% relevance in context, it implies a strong likelihood that the average user would be able to find satisfactory sources on the first page of search results using a rudimentary keyword search. The discovery of additional relevant material beyond that retrieved from MEDLINE indicates WSD tools' value as a supplement to traditional resources for health sciences researchers.

Comparison of three web-scale discovery services for health sciences research*

PubMed Central

Hanneke, Rosie; O'Brien, Kelly K.

2016-01-01

Objective The purpose of this study was to investigate the relative effectiveness of three web-scale discovery (WSD) tools in answering health sciences search queries. Methods Simple keyword searches, based on topics from six health sciences disciplines, were run at multiple real-world implementations of EBSCO Discovery Service (EDS), Ex Libris's Primo, and ProQuest's Summon. Each WSD tool was evaluated in its ability to retrieve relevant results and in its coverage of MEDLINE content. Results All WSD tools returned between 50%–60% relevant results. Primo returned a higher number of duplicate results than the other 2 WSD products. Summon results were more relevant when search terms were automatically mapped to controlled vocabulary. EDS indexed the largest number of MEDLINE citations, followed closely by Summon. Additionally, keyword searches in all 3 WSD tools retrieved relevant material that was not found with precision (Medical Subject Headings) searches in MEDLINE. Conclusions None of the 3 WSD products studied was overwhelmingly more effective in returning relevant results. While difficult to place the figure of 50%–60% relevance in context, it implies a strong likelihood that the average user would be able to find satisfactory sources on the first page of search results using a rudimentary keyword search. The discovery of additional relevant material beyond that retrieved from MEDLINE indicates WSD tools' value as a supplement to traditional resources for health sciences researchers. PMID:27076797

15 CFR 904.251 - Evidence.

Code of Federal Regulations, 2010 CFR

2010-01-01

... the agency as an expert body. Where a decision or part thereof rests on official notice of a material... relevant material or source, whether or not submitted by a party. (2) Exhibits in a foreign language must...

15 CFR 904.251 - Evidence.

Code of Federal Regulations, 2014 CFR

2014-01-01

... the agency as an expert body. Where a decision or part thereof rests on official notice of a material... relevant material or source, whether or not submitted by a party. (2) Exhibits in a foreign language must...

15 CFR 904.251 - Evidence.

Code of Federal Regulations, 2013 CFR

2013-01-01

... the agency as an expert body. Where a decision or part thereof rests on official notice of a material... relevant material or source, whether or not submitted by a party. (2) Exhibits in a foreign language must...

15 CFR 904.251 - Evidence.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the agency as an expert body. Where a decision or part thereof rests on official notice of a material... relevant material or source, whether or not submitted by a party. (2) Exhibits in a foreign language must...

15 CFR 904.251 - Evidence.

Code of Federal Regulations, 2011 CFR

2011-01-01

... the agency as an expert body. Where a decision or part thereof rests on official notice of a material... relevant material or source, whether or not submitted by a party. (2) Exhibits in a foreign language must...

WE-D-18A-05: Construction of Realistic Liver Phantoms From Patient Images and a Commercial 3D Printer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leng, S; Vrieze, T; Kuhlmann, J

2014-06-15

Purpose: To assess image quality and radiation dose reduction in abdominal CT imaging, physical phantoms having realistic background textures and lesions are highly desirable. The purpose of this work was to construct a liver phantom with realistic background and lesions using patient CT images and a 3D printer. Methods: Patient CT images containing liver lesions were segmented into liver tissue, contrast-enhanced vessels, and liver lesions using commercial software (Mimics, Materialise, Belgium). Stereolithography (STL) files of each segmented object were created and imported to a 3D printer (Object350 Connex, Stratasys, MN). After test scans were performed to map the eight availablemore » printing materials into CT numbers, printing materials were assigned to each object and a physical liver phantom printed. The printed phantom was scanned on a clinical CT scanner and resulting images were compared with the original patient CT images. Results: The eight available materials used to print the liver phantom had CT number ranging from 62 to 117 HU. In scans of the liver phantom, the liver lesions and veins represented in the STL files were all visible. Although the absolute value of the CT number in the background liver material (approx. 85 HU) was higher than in patients (approx. 40 HU), the difference in CT numbers between lesions and background were representative of the low contrast values needed for optimization tasks. Future work will investigate materials with contrast sufficient to emulate contrast-enhanced arteries. Conclusion: Realistic liver phantoms can be constructed from patient CT images using a commercial 3D printer. This technique may provide phantoms able to determine the effect of radiation dose reduction and noise reduction techniques on the ability to detect subtle liver lesions in the context of realistic background textures.« less

An approach for maximizing the smallest eigenfrequency of structure vibration based on piecewise constant level set method

NASA Astrophysics Data System (ADS)

Zhang, Zhengfang; Chen, Weifeng

2018-05-01

Maximization of the smallest eigenfrequency of the linearized elasticity system with area constraint is investigated. The elasticity system is extended into a large background domain, but the void is vacuum and not filled with ersatz material. The piecewise constant level set (PCLS) method is applied to present two regions, the original material region and the void region. A quadratic PCLS function is proposed to represent the characteristic function. Consequently, the functional derivative of the smallest eigenfrequency with respect to PCLS function takes nonzero value in the original material region and zero in the void region. A penalty gradient algorithm is proposed, which initializes the whole background domain with the original material and decreases the area of original material region till the area constraint is satisfied. 2D and 3D numerical examples are presented, illustrating the validity of the proposed algorithm.

HEALTH RISKS FROM CONTAMINATED WATER: DO CLASS AND RACE MATTER?

EPA Science Inventory

The impact of contaminants in water on minorities and economically disadvantaged persons was reviewed. Environmental legislation governing water was summarized as background information against which relevant studies were evaluated. The majority of the available information was a...

Operational Reserve: Costs and Considerations

DTIC Science & Technology

material way. Findings include relevant RC costs at approximately 132% of those of a hypothetical equivalent AC unit. The primary contributor to...the Deputy Commandant for Manpower and Reserve Affairs (DC, M and RA), should monitor the totality of relevant monetary and non -monetary costs for any

Detection of microbial biofilms on food processing surfaces: hyperspectral fluorescence imaging study

NASA Astrophysics Data System (ADS)

Jun, Won; Kim, Moon S.; Chao, Kaunglin; Lefcourt, Alan M.; Roberts, Michael S.; McNaughton, James L.

2009-05-01

We used a portable hyperspectral fluorescence imaging system to evaluate biofilm formations on four types of food processing surface materials including stainless steel, polypropylene used for cutting boards, and household counter top materials such as formica and granite. The objective of this investigation was to determine a minimal number of spectral bands suitable to differentiate microbial biofilm formation from the four background materials typically used during food processing. Ultimately, the resultant spectral information will be used in development of handheld portable imaging devices that can be used as visual aid tools for sanitation and safety inspection (microbial contamination) of the food processing surfaces. Pathogenic E. coli O157:H7 and Salmonella cells were grown in low strength M9 minimal medium on various surfaces at 22 +/- 2 °C for 2 days for biofilm formation. Biofilm autofluorescence under UV excitation (320 to 400 nm) obtained by hyperspectral fluorescence imaging system showed broad emissions in the blue-green regions of the spectrum with emission maxima at approximately 480 nm for both E. coli O157:H7 and Salmonella biofilms. Fluorescence images at 480 nm revealed that for background materials with near-uniform fluorescence responses such as stainless steel and formica cutting board, regardless of the background intensity, biofilm formation can be distinguished. This suggested that a broad spectral band in the blue-green regions can be used for handheld imaging devices for sanitation inspection of stainless, cutting board, and formica surfaces. The non-uniform fluorescence responses of granite make distinctions between biofilm and background difficult. To further investigate potential detection of the biofilm formations on granite surfaces with multispectral approaches, principal component analysis (PCA) was performed using the hyperspectral fluorescence image data. The resultant PCA score images revealed distinct contrast between biofilms and granite surfaces. This investigation demonstrated that biofilm formations on food processing surfaces, even for background materials with heterogeneous fluorescence responses, can be detected. Furthermore, a multispectral approach in developing handheld inspection devices may be needed to inspect surface materials that exhibit non-uniform fluorescence.

Utilizing Diffuse Reflection to Increase the Efficiency of Luminescent Solar Concentrators

NASA Astrophysics Data System (ADS)

Bowser, Seth; Weible, Seth; Solomon, Joel; Schrecengost, Jonathan; Wittmershaus, Bruce

A luminescent solar concentrator (LSC) consists of a high index solid plate containing a fluorescent material that converts sunlight into fluorescence. Utilizing total internal reflection, the LSC collects and concentrates the fluorescence at the plate's edges where it is converted into electricity via photovoltaic solar cells. The lower production costs of LSCs make them an attractive alternative to photovoltaic solar cells. To optimize an LSC's efficiency, a white diffusive surface (background) is positioned behind it. The background allows sunlight transmitted in the first pass to be reflected back through the LSC providing a second chance for absorption. Our research examines how the LSC's performance is affected by changing the distance between the white background and the LSC. An automated linear motion apparatus was engineered to precisely measure this distance and the LSC's electrical current, simultaneously. LSC plates, with and without the presence of fluorescent material and in an isolated environment, showed a maximum current at a distance greater than zero. Further experimentation has proved that the optimal distance results from the background's optical properties and how the reflected light enters the LSC. This material is based upon work supported by the National Science Foundation under Grant Number NSF-ECCS-1306157.

Breast cancer survivorship program: testing for cross-cultural relevance.

PubMed

Chung, Lynna K; Cimprich, Bernadine; Janz, Nancy K; Mills-Wisneski, Sharon M

2009-01-01

Taking CHARGE, a theory-based self-management program, was developed to assist women with survivorship concerns that arise after breast cancer treatment. Few such programs have been evaluated for cultural relevance with diverse groups. This study determined the utility and cultural relevance of the program for African American (AA) breast cancer survivors. Two focus groups were held with AA women (n = 13), aged 41 to 72 years, who had completed primary treatment. Focus group participants assessed the program content, format, materials, and the self-regulation process. Content analysis of audiotapes was conducted using an open, focused coding process to identify emergent themes regarding program relevance and topics requiring enhancement and/or further emphasis. Although findings indicated that the program's content was relevant to participants' experiences, AA women identified need for cultural enhancements in spirituality, self-preservation, and positive valuations of body image. Content areas requiring more emphasis included persistent fatigue, competing demands, disclosure, anticipatory guidance, and age-specific concerns about body image/sexuality. Suggested improvements to program materials included portable observation logs, additional resources, more photographs of younger AA women, vivid colors, and images depicting strength. These findings provide the basis for program enhancements to increase the utility and cultural relevance of Taking CHARGE for AA survivors and underscore the importance of evaluating interventions for racially/ethnically diverse groups.

German undergraduate mathematics enrolment numbers: background and change

NASA Astrophysics Data System (ADS)

Ammann, Claudia; Frauendiener, Jörg; Holton, Derek

2010-06-01

Before we consider the German tertiary system, we review the education system and consider other relevant background details. We then concentrate on the tertiary system and observe that the mathematical enrolments are keeping up with the overall student enrolments. At the same time, the first year mathematics enrolments for women are greater than that for men, although more men are still studying mathematics at university. Finally, we note that the German economy seems to play a role in mathematics enrolments though not necessarily to its comparative detriment.

Effect of Broadband Nature of Marine Mammal Echolocation Clicks on Click-Based Population Density Estimates

DTIC Science & Technology

2015-09-30

Blainville’s beaked whales (Mesoplodon densirostris), known to be sensitive to sonar sound and therefore of high relevance to the US Navy, and sperm whale...this study were obtained from von Benda-Beckmann et al. (2010) for the beaked whale, and Zimmer (2011) for the sperm whale. 4 For background...Blainville’s beaked whales and sperm whales are commonly present. Analysis of the noise levels on the system indicated that the background noise was system

Environmental transmission electron microscopy for catalyst materials using a spherical aberration corrector.

PubMed

Takeda, Seiji; Kuwauchi, Yasufumi; Yoshida, Hideto

2015-04-01

Atomic resolution has been obtained using environmental transmission electron microscopy (ETEM) by installing a spherical aberration corrector (Cs-corrector) on the objective lens. Simultaneously, the technology for controlling the environment around a specimen in ETEM has advanced significantly in the past decade. Quantification methodology has recently been established for deriving relevant experimental data in catalyst materials from substantial and systematic ETEM observation at the atomic scale. With this background, this paper summarizes aspects of the evolutional microscopy technique: necessary conditions for atomic resolution in ETEM; reduction of the scattering of electrons by the medium surrounding a specimen; and an environmental cell for structural imaging of a crystalline specimen. The high spatial resolution of a Cs-corrected ETEM is demonstrated for different observation conditions. After statistical analysis combined with numerical image analysis of ETEM data is briefly described, the recent applications of the Cs-corrected ETEM to catalyst materials are reviewed. For gold nanoparticulate catalysts, the structural information on the reaction sites and adsorption sites are deduced. For Pt nanoparticulate catalysts, ETEM studies elucidate the correlation between the catalytic activity and the morphology of the nanoparticles. These studies also reveal oxidation and reduction on the topmost Pt surface layer at the atomic scale. Finally, current issues and the future perspectives of Cs-corrected ETEM are summarized, including the reproducibility of ETEM observation data, the control of environments, the critical evaluation of electron irradiation effects, the full implementation of transmission electron microscopy technology in ETEM, and the safety issues for an ETEM laboratory. Copyright © 2014 Elsevier B.V. All rights reserved.

Removal of Multiple Contaminants: Biological Treatment

EPA Science Inventory

This presentation contains (1) background material on nitrate, perchlorate and ammonia contamination in the continental US; (2) scientific background on biological drinking water treatment; (3) results of bench-scale anaerobic and aerobic treatment studies; (4) results of pilot-s...

Estimation of hysteretic losses for MgB2 tapes under the operating conditions of a generator

NASA Astrophysics Data System (ADS)

Vargas-Llanos, Carlos Roberto; Zermeño, Víctor M. R.; Sanz, Santiago; Trillaud, Frederic; Grilli, Francesco

2016-03-01

Hysteretic losses in the MgB2 wound superconducting coils of a 550 kW synchronous hybrid scaled generator were estimated as part of the European project SUPRAPOWER led by the Spanish Fundación Tecnalia Research & Innovation. Particular interest was given to the losses caused by the magnetic flux ripples in the rotor coils originating from the conventional stator during nominal operation. To compute these losses, a 2D finite element analysis was conducted and Maxwell’s equations written in the H-formulation were solved considering the nonlinear material properties of the conductor materials. The modeled tapes are made of multiple MgB2 filaments embedded in a Ni matrix and soldered to a high purity copper strip and insulated with Dacron braid. Three geometrical models of single tape cross sections of decreasing complexity were studied: (1) the first model reproduced closely the actual cross section obtained from tape micrographs. (2) The second model was obtained from the computed elasto-plastic deformation of a round Ni wire. (3) The third model was based on a simplified cross section with the superconducting filaments bundled in a single elliptical bulky structure. The last geometry allowed the validation of the modeling technique by comparing numerical losses with results from well-established analytical expressions. Additionally, the following cases of filament transpositions of the multi-filamentary tape were studied: no transposition, partial and full transposition; thereby improving understanding of the relevance of the tape fabrication process on the magnitude of the determination of ac losses. Finally, choosing the right level of geometrical detail, the following operational regimes of the machine and its impact on individual superconducting tape losses in the rotor were studied: bias-dc current, ramping current under ramping background field and magnetic flux ripples under dc background current and field.

Low-background gamma spectroscopy at the Boulby Underground Laboratory

NASA Astrophysics Data System (ADS)

Scovell, P. R.; Meehan, E.; Araújo, H. M.; Dobson, J.; Ghag, C.; Kraus, H.; Kudryavtsev, V. A.; Liu, X.-. R.; Majewski, P.; Paling, S. M.; Preece, R. M.; Saakyan, R.; Tomás, A.; Toth, C.; Yeoman, L. M.

2018-01-01

The Boulby Underground Germanium Suite (BUGS) comprises three low-background, high-purity germanium detectors operating in the Boulby Underground Laboratory, located 1.1 km underground in the north-east of England, UK. BUGS utilises three types of detector to facilitate a high-sensitivity, high-throughput radio-assay programme to support the development of rare-event search experiments. A Broad Energy Germanium (BEGe) detector delivers sensitivity to low-energy gamma-rays such as those emitted by 210Pb and 234Th. A Small Anode Germanium (SAGe) well-type detector is employed for efficient screening of small samples. Finally, a standard p-type coaxial detector provides fast screening of standard samples. This paper presents the steps used to characterise the performance of these detectors for a variety of sample geometries, including the corrections applied to account for cascade summing effects. For low-density materials, BUGS is able to radio-assay to specific activities down to 3.6mBqkg-1 for 234Th and 6.6mBqkg-1 for 210Pb both of which have uncovered some significant equilibrium breaks in the 238U chain. In denser materials, where gamma-ray self-absorption increases, sensitivity is demonstrated to specific activities of 0.9mBqkg-1 for 226Ra, 1.1mBqkg-1 for 228Ra, 0.3mBqkg-1 for 224Ra, and 8.6mBqkg-1 for 40K with all upper limits at a 90% confidence level. These meet the requirements of most screening campaigns presently under way for rare-event search experiments, such as the LUX-ZEPLIN (LZ) dark matter experiment. We also highlight the ability of the BEGe detector to probe the X-ray fluorescence region which can be important to identify the presence of radioisotopes associated with neutron production; this is of particular relevance in experiments sensitive to nuclear recoils.

MATERIALS FOR MODERNIZATION.

ERIC Educational Resources Information Center

JACKSON, R. GRAHAM

CHOICES AND ISSUES IN SELECTING MATERIALS FOR MODERNIZATION OF SCHOOL BUILDINGS ARE DISCUSSED IN THIS REPORT. BACKGROUND INFORMATION IS INTRODUCED IN TERMS OF REASONS FOR ABANDONMENT, THE CAUSES AND EFFECTS OF SCHOOL BUILDING OBSOLESCENCE, AND PROBLEMS IN THE MODERNIZATION PROCESS. INTERIOR PARTITIONS ARE DISCUSSED IN TERMS OF BUILDING MATERIALS,…

Audio-Visual Materials in Adult Consumer Education: An Annotated Bibliography.

ERIC Educational Resources Information Center

Forgue, Raymond E.; And Others

Designed to provide a quick but thorough reference for consumer educators of adults to use when choosing audio-visual materials, this annotated bibliography includes eighty-five titles from the currently available 1,500 films, slidesets, cassettes, records, and transparencies. (Materials were rejected because they were out-of-date; not relevant to…

Post-Secondary Vocational Home Economics Instructional Materials Needs Assessment Project: State-of-the-Art and Final Report.

ERIC Educational Resources Information Center

Glosson, Linda R.; Bowers, Candice H.

A Texas project assessed postsecondary vocational home economics instructors' needs for instructional media and materials as well as the need for training in the development of curriculum materials. Relevant post-secondary programs identified were child development, food service/dietetics, fashion design/tailoring, and interior design. In…

Bilingual/E.S.L. Materials Development, Grades 1-8, 1987. OREA Report.

ERIC Educational Resources Information Center

Berney, Tomi D.; Friedman, Grace Ibanez

New York City's program in Bilingual/E.S.L. Materials Development, Grade 1-8 was established to develop and/or update curricula and informational materials relevant to bilingual and English-as-a-Second-Language instruction. Curriculum development teams worked on independent activities. The project had 10 proposed curriculum initiatives, but the…

Gender Equity and the Law.

ERIC Educational Resources Information Center

Rosenberg, Judith H.

These instructional materials focus on federal laws and executive orders that prohibit sex discrimination in employment and education. The materials consist of the following: (1) a list of some of the legislation covered; (2) a list of relevant materials and resources; (3) a list of 14 instructional activities, each described by one or a few…

An ultra-low background PMT for liquid xenon detectors

DOE PAGES

Akerib, D. S.; Bai, X.; Bernard, E.; ...

2012-11-15

Results are presented from radioactivity screening of two models of photomultiplier tubes designed for use in current and future liquid xenon experiments. The Hamamatsu 5.6 cm diameter R8778 PMT, used in the LUX dark matter experiment, has yielded a positive detection of four common radioactive isotopes: 238U, 232Th, 40K, and 60Co. Screening of LUX materials has rendered backgrounds from other detector materials subdominant to the R8778 contribution. A prototype Hamamatsu 7.6 cm diameter R11410 MOD PMT has also been screened, with benchmark isotope counts measured at <0.4 238U / <0.3 232Th / < 8.3 40K / 2.0+-0.2 60Co mBq/PMT. This represents a large reduction, equal to a change of xmore » $$\\frac{1}{24}$$ 238U / x $$\\frac{1}{9}$$ 232Th / x $$\\frac{1}{8}$$ 40K per PMT, between R8778 and R11410 MOD, concurrent with a doubling of the photocathode surface area (4.5 cm to 6.4 cm diameter). 60Co measurements are comparable between the PMTs, but can be significantly reduced in future R11410 MOD units through further material selection. Assuming PMT activity equal to the measured 90% upper limits, Monte Carlo estimates indicate that replacement of R8778 PMTs with R11410 MOD PMTs will change LUX PMT electron recoil background contributions by a factor of x $$\\frac{1}{25}$$ after further material selection for 60Co reduction, and nuclear recoil backgrounds by a factor of \\times $$\\frac{1}{36}$$. The strong reduction in backgrounds below the measured R8778 levels makes the R11410 MOD a very competitive technology for use in large-scale liquid xenon detectors.« less

On the relationship between indentation hardness and modulus, and the damage resistance of biological materials.

PubMed

Labonte, David; Lenz, Anne-Kristin; Oyen, Michelle L

2017-07-15

The remarkable mechanical performance of biological materials is based on intricate structure-function relationships. Nanoindentation has become the primary tool for characterising biological materials, as it allows to relate structural changes to variations in mechanical properties on small scales. However, the respective theoretical background and associated interpretation of the parameters measured via indentation derives largely from research on 'traditional' engineering materials such as metals or ceramics. Here, we discuss the functional relevance of indentation hardness in biological materials by presenting a meta-analysis of its relationship with indentation modulus. Across seven orders of magnitude, indentation hardness was directly proportional to indentation modulus. Using a lumped parameter model to deconvolute indentation hardness into components arising from reversible and irreversible deformation, we establish criteria which allow to interpret differences in indentation hardness across or within biological materials. The ratio between hardness and modulus arises as a key parameter, which is related to the ratio between irreversible and reversible deformation during indentation, the material's yield strength, and the resistance to irreversible deformation, a material property which represents the energy required to create a unit volume of purely irreversible deformation. Indentation hardness generally increases upon material dehydration, however to a larger extent than expected from accompanying changes in indentation modulus, indicating that water acts as a 'plasticiser'. A detailed discussion of the role of indentation hardness, modulus and toughness in damage control during sharp or blunt indentation yields comprehensive guidelines for a performance-based ranking of biological materials, and suggests that quasi-plastic deformation is a frequent yet poorly understood damage mode, highlighting an important area of future research. Instrumented indentation is a widespread tool for characterising the mechanical properties of biological materials. Here, we show that the ratio between indentation hardness and modulus is approximately constant in biological materials. A simple elastic-plastic series deformation model is employed to rationalise part of this correlation, and criteria for a meaningful comparison of indentation hardness across biological materials are proposed. The ratio between indentation hardness and modulus emerges as the key parameter characterising the relative amount of irreversible deformation during indentation. Despite their comparatively high hardness to modulus ratio, biological materials are susceptible to quasiplastic deformation, due to their high toughness: quasi-plastic deformation is hence hypothesised to be a frequent yet poorly understood phenomenon, highlighting an important area of future research. Copyright © 2017 Acta Materialia Inc. All rights reserved.

The DC8 as an Exemplar of Relevant Physics

ERIC Educational Resources Information Center

Lockett, T. K.

1974-01-01

Presents data on aircraft take off and landing, including measurements of turning speeds, triangle of velocities method, fuel consumption, air pressure differences, air turbulence, maintenance inspection, and airborne radar. Indicates the materials can serve as relevant physics examples in teaching sixth and seventh form pupils. (CC)

39 CFR 965.9 - Evidence.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Evidence. 965.9 Section 965.9 Postal Service UNITED STATES POSTAL SERVICE PROCEDURES RULES OF PRACTICE IN PROCEEDINGS RELATIVE TO MAIL DISPUTES § 965.9 Evidence. (a) In general, admissibility will hinge on relevancy and materiality. However, relevant...

Honors Anthropology and the Four Rs.

ERIC Educational Resources Information Center

Farrer, Claire R.

1990-01-01

Describes an honors introductory cultural anthropology course taught at California State University, Chico. Discusses the course design, how course information is made relevant and reinforced, and how students have partial responsibility for the course design. Discusses the use of science fiction books to make material relevant to students. (JS)

Materials for Paediatric Dentistry. Part 2: The Evidence.

PubMed

Jenkins, Natalie

2015-12-01

Which materials should be used to restore primary teeth? The second part in this series summarizes the current evidence base relating to this question, and describes the biological approach to caries management. CPD/Clinical Relevance: Our decisions regarding material choices should be based, where possible, on up-to-date evidence. This will help to ensure that the appropriate material is placed in the appropriate clinical scenario.

RadMAP: The Radiological Multi-sensor Analysis Platform

NASA Astrophysics Data System (ADS)

Bandstra, Mark S.; Aucott, Timothy J.; Brubaker, Erik; Chivers, Daniel H.; Cooper, Reynold J.; Curtis, Joseph C.; Davis, John R.; Joshi, Tenzing H.; Kua, John; Meyer, Ross; Negut, Victor; Quinlan, Michael; Quiter, Brian J.; Srinivasan, Shreyas; Zakhor, Avideh; Zhang, Richard; Vetter, Kai

2016-12-01

The variability of gamma-ray and neutron background during the operation of a mobile detector system greatly limits the ability of the system to detect weak radiological and nuclear threats. The natural radiation background measured by a mobile detector system is the result of many factors, including the radioactivity of nearby materials, the geometric configuration of those materials and the system, the presence of absorbing materials, and atmospheric conditions. Background variations tend to be highly non-Poissonian, making it difficult to set robust detection thresholds using knowledge of the mean background rate alone. The Radiological Multi-sensor Analysis Platform (RadMAP) system is designed to allow the systematic study of natural radiological background variations and to serve as a development platform for emerging concepts in mobile radiation detection and imaging. To do this, RadMAP has been used to acquire extensive, systematic background measurements and correlated contextual data that can be used to test algorithms and detector modalities at low false alarm rates. By combining gamma-ray and neutron detector systems with data from contextual sensors, the system enables the fusion of data from multiple sensors into novel data products. The data are curated in a common format that allows for rapid querying across all sensors, creating detailed multi-sensor datasets that are used to study correlations between radiological and contextual data, and develop and test novel techniques in mobile detection and imaging. In this paper we will describe the instruments that comprise the RadMAP system, the effort to curate and provide access to multi-sensor data, and some initial results on the fusion of contextual and radiological data.

Sexual Functioning in Men Living with a Spinal Cord Injury–A Narrative Literature Review

PubMed Central

Sunilkumar, MM; Boston, Patricia; Rajagopal, MR

2015-01-01

Background: Sexual dysfunction is a major concern for Indian men living with a spinal cord injury Objectives: To examine the literature related to sexuality traumatic cord injury and its impact on sexual functioning. Materials and Methods: Databases using Cumulative Index to Nursing and Allied Health Literature (CINAHL) 2000–2012, Medline 1989–2012, Applied Social Sciences Index and Abstracts (ASSIA) 1989–2012 and Google Scholar were the search engines used used for literature review. Results: The search yielded a total of 457 articles and only 75 of them were found relevant. The minimum number of articles required to meet the inclusion criteria for this review was 25–30 articles. Out of the 75 articles, 33 were considered relevant or related to the topic of sexual functioning, spinal cord injury, and paraplegia. Six areas were identified: Sexual stigmatization, physiological barriers to sexual satisfaction, clinical aspects of sexual functioning, biomedical approaches to sexual dysfunction, partner satisfaction, and lack of accessibility to sexual education. Conclusion: Spinal cord injury and sexual functioning affects a large segment of the male Indian population, yet most current research focuses on quantitative measurement with the emphasis on ejaculatory dysfunction, orgasm impairment, incontinence, and other physiological dysfunction. Further research is needed to address the subjective accounts of patients themselves with respect to the emotional and social impact of sexual disability. This would help to identify the best possible outcomes for both treatment and rehabilitation. PMID:26600694

Palliative Sedation in Advanced Cancer Patients: Does it Shorten Survival Time? - A Systematic Review

PubMed Central

Barathi, B; Chandra, Prabha S

2013-01-01

Background: Patients with advanced cancer often suffer from multiple refractory symptoms in the terminal phase of their life. Palliative sedation is one of the few ways to relieve this refractory suffering. Objectives: This systematic review investigated the effect of palliative sedation on survival time in terminally ill cancer patients. Materials and Methods: Six electronic databases were searched for both prospective and retrospective studies which evaluated the effect of palliative sedation on survival time. Only those studies which had a comparison group that did not receive palliative sedation were selected for the review. Abstracts of all retrieved studies were screened to include the most relevant studies and only studies which met inclusion criteria were selected. References of all retrieved studies were also screened for relevant studies. Selected studies were assessed for quality and data extraction was done using the structured data extraction form. Results: Eleven studies including four prospective and seven retrospective studies were identified. Mean survival time (MST) was measured as the time from last admission until death. A careful analysis of the results of all the 11 studies indicated that MST of sedated and non-sedated group was not statistically different in any of the studies. Conclusion: This systematic review supports the fact that palliative sedation does not shorten survival in terminally ill cancer patients. However, this conclusion needs to be taken with consideration of the methodology, study design, and the population studied of the included studies in this review. PMID:23766594

Guidelines 2.0: systematic development of a comprehensive checklist for a successful guideline enterprise

PubMed Central

Schünemann, Holger J.; Wiercioch, Wojtek; Etxeandia, Itziar; Falavigna, Maicon; Santesso, Nancy; Mustafa, Reem; Ventresca, Matthew; Brignardello-Petersen, Romina; Laisaar, Kaja-Triin; Kowalski, Sérgio; Baldeh, Tejan; Zhang, Yuan; Raid, Ulla; Neumann, Ignacio; Norris, Susan L.; Thornton, Judith; Harbour, Robin; Treweek, Shaun; Guyatt, Gordon; Alonso-Coello, Pablo; Reinap, Marge; Brožek, Jan; Oxman, Andrew; Akl, Elie A.

2014-01-01

Background: Although several tools to evaluate the credibility of health care guidelines exist, guidance on practical steps for developing guidelines is lacking. We systematically compiled a comprehensive checklist of items linked to relevant resources and tools that guideline developers could consider, without the expectation that every guideline would address each item. Methods: We searched data sources, including manuals of international guideline developers, literature on guidelines for guidelines (with a focus on methodology reports from international and national agencies, and professional societies) and recent articles providing systematic guidance. We reviewed these sources in duplicate, extracted items for the checklist using a sensitive approach and developed overarching topics relevant to guidelines. In an iterative process, we reviewed items for duplication and omissions and involved experts in guideline development for revisions and suggestions for items to be added. Results: We developed a checklist with 18 topics and 146 items and a webpage to facilitate its use by guideline developers. The topics and included items cover all stages of the guideline enterprise, from the planning and formulation of guidelines, to their implementation and evaluation. The final checklist includes links to training materials as well as resources with suggested methodology for applying the items. Interpretation: The checklist will serve as a resource for guideline developers. Consideration of items on the checklist will support the development, implementation and evaluation of guidelines. We will use crowdsourcing to revise the checklist and keep it up to date. PMID:24344144

Final ecosystem goods and services enhance societal relevance of contaminated-site remediation

EPA Science Inventory

Background/Question/Methods Exposure to environmental stressors can adversely affect both human health and ecological receptors and impacts on the latter influence the community's overall vulnerability. Risk assessment guidance promotes conceptual site models to integrate multip...

Utilizing Creative Pedagogy

ERIC Educational Resources Information Center

Muirhead, Brent

2011-01-01

The article discusses creative teaching for public school teachers. It provides historical background on creativity research and highlights the barriers to creative teaching. The article emphasizes the relevant ways that teachers can encourage creativity in student work while supporting course objectives and standardized test preparation. The…

Safety Relevant Observations on the TGV High Speed Train

DOT National Transportation Integrated Search

1991-07-01

This report describes the background leading up to the development of the train grande vitesse (TGV) system, the French high-speed technology; the technology itself in some detail; and the potential U.S. applications. This document also reviews Feder...

Effects of testing on subsequent re-encoding and long-term forgetting of action-relevant materials: On the influence of recall type.

PubMed

Kubik, Veit; Nilsson, Lars-Göran; Olofsson, Jonas K; Jönsson, Fredrik U

2015-10-01

Testing one's memory of previously studied information reduces the rate of forgetting, compared to restudy. However, little is known about how this direct testing effect applies to action phrases (e.g., "wash the car") - a learning material relevant to everyday memory. As action phrases consist of two different components, a verb (e.g., "wash") and a noun (e.g., "car"), testing can either be implemented as noun-cued recall of verbs or verb-cued recall of nouns, which may differently affect later memory performance. In the present study, we investigated the effect of testing for these two recall types, using verbally encoded action phrases as learning materials. Results showed that repeated study-test practice, compared to repeated study-restudy practice, decreased the forgetting rate across 1 week to a similar degree for both noun-cued and verb-cued recall types. However, noun-cued recall of verbs initiated more new subsequent learning during the first restudy, compared to verb-cued recall of nouns. The study provides evidence that testing has benefits on both subsequent restudy and long-term retention of action-relevant materials, but that these benefits are differently expressed with testing via noun-cued versus verb-cued recall. © 2015 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

Overview of Materials International Space Station Experiment 7B

NASA Technical Reports Server (NTRS)

Jaworske, Donald A.; Siamidis, John

2009-01-01

Materials International Space Station Experiment 7B (MISSE 7B) is the most recent in a series of experiments flown on the exterior of International Space Station for the purpose of determining the durability of materials and components in the space environment. A collaborative effort among the Department of Defense, the National Aeronautics and Space Administration, industry, and academia, MISSE 7B will be flying a number of NASA experiments designed to gain knowledge in the area of space environmental effects to mitigate risk for exploration missions. Consisting of trays called Passive Experiment Containers, the suitcase sized payload opens on hinges and allows active and passive experiments contained within to be exposed to the ram and wake or zenith and nadir directions in low Earth orbit, in essence, providing a test bed for atomic oxygen exposure, ultraviolet radiation exposure, charged particle radiation exposure, and thermal cycling. New for MISSE 7B is the ability to monitor experiments actively, with data sent back to Earth via International Space Station communications. NASA?s active and passive experiments cover a range of interest for the Agency. Materials relevant to the Constellation Program include: solar array materials, seal materials, and thermal protection system materials. Materials relevant to the Exploration Technology Development Program include: fabrics for spacesuits, materials for lunar dust mitigation, and new thermal control coatings. Sensors and components on MISSE 7B include: atomic oxygen fluence monitors, ultraviolet radiation sensors, and electro-optical components. In addition, fundamental space environmental durability science experiments are being flown to gather atomic oxygen erosion data and thin film polymer mechanical and optical property data relevant to lunar lander insulation and the James Web Space Telescope. This paper will present an overview of the NASA experiments to be flown on MISSE 7B, along with a summary of the thermal environment to be expected during the 1 yr mission scheduled for launch in 2009.

Factors contributing to intervention fidelity in a multi-site chronic disease self-management program

PubMed Central

Perrin, Karen M; Burke, Somer Goad; O'Connor, Danielle; Walby, Gary; Shippey, Claire; Pitt, Seraphine; McDermott, Robert J; Forthofer, Melinda S

2006-01-01

Background and objectives Disease self-management programs have been a popular approach to reducing morbidity and mortality from chronic disease. Replicating an evidence-based disease management program successfully requires practitioners to ensure fidelity to the original program design. Methods The Florida Health Literacy Study (FHLS) was conducted to investigate the implementation impact of the Pfizer, Inc. Diabetes Mellitus and Hypertension Disease Self-Management Program based on health literacy principles in 14 community health centers in Florida. The intervention components discussed include health educator recruitment and training, patient recruitment, class sessions, utilization of program materials, translation of program manuals, patient retention and follow-up, and technical assistance. Results This report describes challenges associated with achieving a balance between adaptation for cultural relevance and fidelity when implementing the health education program across clinic sites. This balance was necessary to achieve effectiveness of the disease self-management program. The FHLS program was implemented with a high degree of fidelity to the original design and used original program materials. Adaptations identified as advantageous to program participation are discussed, such as implementing alternate methods for recruiting patients and developing staff incentives for participation. Conclusion Effective program implementation depends on the talent, skill and willing participation of clinic staff. Program adaptations that conserve staff time and resources and recognize their contribution can increase program effectiveness without jeopardizing its fidelity. PMID:17067388

Versatile fabrication of paper-based microfluidic devices with high chemical resistance using scholar glue and magnetic masks.

PubMed

Cardoso, Thiago M G; de Souza, Fabrício R; Garcia, Paulo T; Rabelo, Denilson; Henry, Charles S; Coltro, Wendell K T

2017-06-29

Simple methods have been developed for fabricating microfluidic paper-based analytical devices (μPADs) but few of these devices can be used with organic solvents and/or aqueous solutions containing surfactants. This study describes a simple fabrication strategy for μPADs that uses readily available scholar glue to create the hydrophobic flow barriers that are resistant to surfactants and organic solvents. Microfluidic structures were defined by magnetic masks designed with either neodymium magnets or magnetic sheets to define the patter, and structures were created by spraying an aqueous solution of glue on the paper surface. The glue-coated paper was then exposed to UV/Vis light for cross-linking to maximize chemical resistance. Examples of microzone arrays and microfluidic devices are demonstrated. μPADs fabricated with scholar glue retained their barriers when used with surfactants, organic solvents, and strong/weak acids and bases unlike common wax-printed barriers. Paper microzones and microfluidic devices were successfully used for colorimetric assays of clinically relevant analytes commonly detected in urinalysis to demonstrate the low background of the barrier material and generally applicability to sensing. The proposed fabrication method is attractive for both its ability to be used with diverse chemistries and the low cost and simplicity of the materials and process. Copyright © 2017 Elsevier B.V. All rights reserved.

Comparative evaluation between glass and polyethylene fiber reinforced composites: A review of the current literature

PubMed Central

Mangoush, Enas; Säilynoja, Eija; Prinssi, Roosa; Lassila, Lippo; Vallittu, Pekka K.

2017-01-01

Background Fiber reinforced composite (FRC) is a promising class of material that gives clinicians alternative treatment options. There are many FRC products available in the market based on either glass or polyethylene fiber type. The aim of this study was to present a comparison between glass and polyethylene fiber reinforced composites based on available literature review. Material and Methods A thorough literature search, with no limitation, was done up to June 2017. The range of relevant publications was surveyed using PubMed and Google Scholar. From the search results, articles related to our search terms were only considered. An assessment of these articles was done by two individuals in order to include only articles directly compare between glass and polyethylene FRCs. The search terms used were “fiber reinforced dental composites” and “glass and polyethylene fibers in dentistry”. Results The search provided 276 titles. Full-text analysis was performed for 29 articles that met the inclusion criteria. Most were laboratory-based research with various test specimen designs prepared according to ISO standard or with extracted teeth and only three articles were clinical studies. Most of studies (n=23) found superior characteristics of glass FRCs over polyethylene FRCs. Conclusions Significant reinforcement differences between commercial glass and polyethylene fiber reinforced composites were found. Key words:Fiber reinforced composite, glass fiber, polyethylene fiber. PMID:29410756

Local Renyi entropic profiles of DNA sequences

PubMed Central

Vinga, Susana; Almeida, Jonas S

2007-01-01

Background In a recent report the authors presented a new measure of continuous entropy for DNA sequences, which allows the estimation of their randomness level. The definition therein explored was based on the Rényi entropy of probability density estimation (pdf) using the Parzen's window method and applied to Chaos Game Representation/Universal Sequence Maps (CGR/USM). Subsequent work proposed a fractal pdf kernel as a more exact solution for the iterated map representation. This report extends the concepts of continuous entropy by defining DNA sequence entropic profiles using the new pdf estimations to refine the density estimation of motifs. Results The new methodology enables two results. On the one hand it shows that the entropic profiles are directly related with the statistical significance of motifs, allowing the study of under and over-representation of segments. On the other hand, by spanning the parameters of the kernel function it is possible to extract important information about the scale of each conserved DNA region. The computational applications, developed in Matlab m-code, the corresponding binary executables and additional material and examples are made publicly available at . Conclusion The ability to detect local conservation from a scale-independent representation of symbolic sequences is particularly relevant for biological applications where conserved motifs occur in multiple, overlapping scales, with significant future applications in the recognition of foreign genomic material and inference of motif structures. PMID:17939871

Biofield Therapies: Helpful or Full of Hype? A Best Evidence Synthesis

PubMed Central

Mills, Paul J.

2009-01-01

Background Biofield therapies (such as Reiki, therapeutic touch, and healing touch) are complementary medicine modalities that remain controversial and are utilized by a significant number of patients, with little information regarding their efficacy. Purpose This systematic review examines 66 clinical studies with a variety of biofield therapies in different patient populations. Method We conducted a quality assessment as well as a best evidence synthesis approach to examine evidence for biofield therapies in relevant outcomes for different clinical populations. Results Studies overall are of medium quality, and generally meet minimum standards for validity of inferences. Biofield therapies show strong evidence for reducing pain intensity in pain populations, and moderate evidence for reducing pain intensity hospitalized and cancer populations. There is moderate evidence for decreasing negative behavioral symptoms in dementia and moderate evidence for decreasing anxiety for hospitalized populations. There is equivocal evidence for biofield therapies' effects on fatigue and quality of life for cancer patients, as well as for comprehensive pain outcomes and affect in pain patients, and for decreasing anxiety in cardiovascular patients. Conclusion There is a need for further high-quality studies in this area. Implications and future research directions are discussed. Electronic supplementary material The online version of this article (doi:10.1007/s12529-009-9062-4) contains supplementary material, which is available to authorized users. PMID:19856109

Reductive precipitation of neptunium on iron surfaces under anaerobic conditions

NASA Astrophysics Data System (ADS)

Yang, H.; Cui, D.; Grolimund, D.; Rondinella, V. V.; Brütsch, R.; Amme, M.; Kutahyali, C.; Wiss, A. T.; Puranen, A.; Spahiu, K.

2017-12-01

Reductive precipitation of the radiotoxic nuclide 237Np from nuclear waste on the surface of iron canister material at simulated deep repository conditions was investigated. Pristine polished as well as pre-corroded iron specimens were interacted in a deoxygenated solution containing 10-100 μM Np(V), with 10 mM NaCl and 2 mM NaHCO3 as background electrolytes. The reactivity of each of the two different systems was investigated by analyzing the temporal evolution of the Np concentration in the reservoir. It was observed that pre-oxidized iron specimen with a 40 μm Fe3O4 corrosion layer are considerably more reactive regarding the reduction and immobilization of aqueous Np(V) as compared to pristine polished Fe(0) surfaces. 237Np immobilized by the reactive iron surfaces was characterized by scanning electron microscopy as well as synchrotron-based micro-X-ray fluorescence and X-ray absorption spectroscopy. At the end of experiments, a 5-8 μm thick Np-rich layer was observed to be formed ontop of the Fe3O4 corrosion layer on the iron specimen. The findings from this work are significant in the context of performance assessments of deep geologic repositories using iron as high level radioactive waste (HLW) canister material and are of relevance regarding removing pollutants from contaminated soil or groundwater aquifer systems.

Monte Carlo parametric studies of neutron interrogation with the Associated Particle Technique for cargo container inspections

NASA Astrophysics Data System (ADS)

Deyglun, Clément; Carasco, Cédric; Pérot, Bertrand

2014-06-01

The detection of Special Nuclear Materials (SNM) by neutron interrogation is extensively studied by Monte Carlo simulation at the Nuclear Measurement Laboratory of CEA Cadarache (French Alternative Energies and Atomic Energy Commission). The active inspection system is based on the Associated Particle Technique (APT). Fissions induced by tagged neutrons (i.e. correlated to an alpha particle in the DT neutron generator) in SNM produce high multiplicity coincidences which are detected with fast plastic scintillators. At least three particles are detected in a short time window following the alpha detection, whereas nonnuclear materials mainly produce single events, or pairs due to (n,2n) and (n,n'γ) reactions. To study the performances of an industrial cargo container inspection system, Monte Carlo simulations are performed with the MCNP-PoliMi transport code, which records for each neutron history the relevant information: reaction types, position and time of interactions, energy deposits, secondary particles, etc. The output files are post-processed with a specific tool developed with ROOT data analysis software. Particles not correlated with an alpha particle (random background), counting statistics, and time-energy resolutions of the data acquisition system are taken into account in the numerical model. Various matrix compositions, suspicious items, SNM shielding and positions inside the container, are simulated to assess the performances and limitations of an industrial system.

Pima Cultural Background Materials for an Elementary and Secondary Education Act Title III Project.

ERIC Educational Resources Information Center

Brook, Weston L., Comp.; And Others

Produced with funds under Title III of the Elementary and Secondary Education Act, this unit on Pima cultural background and Middle American civilization was designed to help Pima students achieve a sense of identity and pride in their Indian background by (1) thinking of themselves as a people with a long history and (2) learning that their…

A review on natural background radiation

PubMed Central

Shahbazi-Gahrouei, Daryoush; Gholami, Mehrdad; Setayandeh, Samaneh

2013-01-01

The world is naturally radioactive and approximately 82% of human-absorbed radiation doses, which are out of control, arise from natural sources such as cosmic, terrestrial, and exposure from inhalation or intake radiation sources. In recent years, several international studies have been carried out, which have reported different values regarding the effect of background radiation on human health. Gamma radiation emitted from natural sources (background radiation) is largely due to primordial radionuclides, mainly 232Th and 238U series, and their decay products, as well as 40K, which exist at trace levels in the earth's crust. Their concentrations in soil, sands, and rocks depend on the local geology of each region in the world. Naturally occurring radioactive materials generally contain terrestrial-origin radionuclides, left over since the creation of the earth. In addition, the existence of some springs and quarries increases the dose rate of background radiation in some regions that are known as high level background radiation regions. The type of building materials used in houses can also affect the dose rate of background radiations. The present review article was carried out to consider all of the natural radiations, including cosmic, terrestrial, and food radiation. PMID:24223380

Effect of genetic background on the stability of sunflower fatty acid composition in different high oleic mutations.

PubMed

Alberio, Constanza; Aguirrezábal, Luis An; Izquierdo, Natalia G; Reid, Roberto; Zuil, Sebastián; Zambelli, Andrés

2018-02-01

The effect of genetic background on the stability of fatty acid composition in sunflower near isogenic lines (NILs) carrying high-oleic Pervenets (P) or high-oleic NM1 mutations was studied. The materials were field-tested in different locations and at different sowing dates to evaluate a wide range of environmental conditions. Relationships were established between the fatty acids and the minimum night temperature (MNT) and the response was characterized. A genetic background effect for the fatty acid composition was found in both groups of NILs. The NM1-NILs showed an oleic level higher than 910 g kg -1 and they were more stable across environments with a zero or low dependence on the genetic background; on the other hand, high oleic materials bearing the P mutation showed lower levels of oleic acid, with a higher variation in fatty acid composition and a highly significant dependence on the genetic background. The NM1 mutation is the best option to develop ultra-high oleic sunflower oil that is stable across environments and genetic backgrounds, making its agronomical production more efficient and predictable. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

Nanoscale Materials for Human Space Exploration: Regenerable CO2 Removal

NASA Technical Reports Server (NTRS)

Arepalli, Sivaram; Nikolaev, Pasha; Gorelik, Olga; Huffman, Chad; Moloney, Padraig; Allada, Ram; Yowell, Leonard

2005-01-01

This viewgraph presentation reviews the use of Nanoscale materials in CO2 removal. It presented the background and review work on regenerable CO2 removal for spaceflight application. It demonstrated a new strategy for developing solid-supported amine absorbents based on carbon nanotube materials.

ICP MS selection of radiopure materials for the GERDA experiment

NASA Astrophysics Data System (ADS)

di Vacri, M. L.; Nisi, S.; Cattadori, C.; Janicsko, J.; Lubashevskiy, A.; Smolnikov, A.; Walter, M.

2015-08-01

The GERDA (GERmanium Detector Array) experiment, located in the Gran Sasso Underground Laboratory (LNGS, Italy) aims to search for neutrinoless double beta (0νββ) decay of the 76Ge isotope. Both an ultra-low radioactivity background environment and active techniques to abate the residual background are required to reach the background index (of 10-3 counts/keV kg y) at the Qββ. In order to veto and suppress those events that partially deposit energy in Ge detectors, the readout of liquid argon (LAr) scintillation light (SL) has been implemented for the second GERDA experimental Phase. A double veto system has been designed and constructed using highly radiopure materials (scintillating fibers, wavelength shifters, polymeric foils, reflective foils). This work describes the study of lead, thorium and uranium ultra-trace content, performed at the LNGS Chemistry Laboratory by High Resolution Mass Spectrometry (HR ICP MS), for the selection of all materials involved in the construction of the veto system

ICP MS selection of radiopure materials for the GERDA experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Di Vacri, M. L., E-mail: divacrim@lngs.infn.it; Dipartimento di Scienze Fisiche e Chimiche, University of L’Aquila, via Vetoio, 67100 L’Aquila; Nisi, S., E-mail: nisi@lngs.infn.it

2015-08-17

The GERDA (GERmanium Detector Array) experiment, located in the Gran Sasso Underground Laboratory (LNGS, Italy) aims to search for neutrinoless double beta (0νββ) decay of the {sup 76}Ge isotope. Both an ultra-low radioactivity background environment and active techniques to abate the residual background are required to reach the background index (of 10{sup −3} counts/keV kg y) at the Q{sub ββ}. In order to veto and suppress those events that partially deposit energy in Ge detectors, the readout of liquid argon (LAr) scintillation light (SL) has been implemented for the second GERDA experimental Phase. A double veto system has been designedmore » and constructed using highly radiopure materials (scintillating fibers, wavelength shifters, polymeric foils, reflective foils). This work describes the study of lead, thorium and uranium ultra-trace content, performed at the LNGS Chemistry Laboratory by High Resolution Mass Spectrometry (HR ICP MS), for the selection of all materials involved in the construction of the veto system.« less

Rare Earth Fluorescent Nanomaterials for Enhanced Development of Latent Fingerprints.

PubMed

Wang, Meng; Li, Ming; Yu, Aoyang; Wu, Jian; Mao, Chuanbin

2015-12-30

The most commonly found fingerprints at crime scenes are latent and, thus, an efficient method for detecting latent fingerprints is very important. However, traditional developing techniques have drawbacks such as low developing sensitivity, high background interference, complicated operation, and high toxicity. To tackle this challenge, we have synthesized two kinds of rare earth fluorescent nanomaterials, including the fluoresce red-emitting YVO4:Eu nanocrystals and green-emitting LaPO4:Ce,Tb nanobelts, and then used them as fluorescent labels for the development of latent fingerprints with high sensitivity, high contrast, high selectivity, high efficiency, and low background interference, on various substrates including noninfiltrating materials, semi-infiltrating materials, and infiltrating materials.

Statistical Models of Fracture Relevant to Nuclear-Grade Graphite: Review and Recommendations

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Bratton, Robert L.

2011-01-01

The nuclear-grade (low-impurity) graphite needed for the fuel element and moderator material for next-generation (Gen IV) reactors displays large scatter in strength and a nonlinear stress-strain response from damage accumulation. This response can be characterized as quasi-brittle. In this expanded review, relevant statistical failure models for various brittle and quasi-brittle material systems are discussed with regard to strength distribution, size effect, multiaxial strength, and damage accumulation. This includes descriptions of the Weibull, Batdorf, and Burchell models as well as models that describe the strength response of composite materials, which involves distributed damage. Results from lattice simulations are included for a physics-based description of material breakdown. Consideration is given to the predicted transition between brittle and quasi-brittle damage behavior versus the density of damage (level of disorder) within the material system. The literature indicates that weakest-link-based failure modeling approaches appear to be reasonably robust in that they can be applied to materials that display distributed damage, provided that the level of disorder in the material is not too large. The Weibull distribution is argued to be the most appropriate statistical distribution to model the stochastic-strength response of graphite.

Message framing and color combination in the perception of medical information.

PubMed

Chien, Yu-Hung

2011-04-01

A 2 x 2 between-subjects design was used to examine the effects of message framing (gain vs loss) and color combination (red background with white characters vs white background with black characters) on 120 university students' perception of materials promoting the H1N1 flu vaccine and their willingness to receive the vaccine after they had read the materials. Each participant completed a 6-item questionnaire, and the results of an analysis of variance showed that participants rated vaccine information presented through loss-framed messages as having greater interest and leading to greater understanding. Loss-framed messages presented on a white background with black characters significantly increased the willingness of the participants to receive the vaccine.

A Shallow Underground Laboratory for Low-Background Radiation Measurements and Materials Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aalseth, Craig E.; Bonicalzi, Ricco; Cantaloub, Michael G.

Abstract: Pacific Northwest National Laboratory recently commissioned a new shallow underground laboratory, located at a depth of approximately 30 meters water-equivalent. This new addition to the small class of radiation measurement laboratories located at modest underground depths worldwide houses the latest generation of custom-made, high-efficiency, low-background gamma-ray spectrometers and gas proportional counters. This manuscript describes the unique capabilities present in the shallow underground laboratory; these include large-scale ultra-pure materials production and a suite of radiation detection systems. Reported data characterize the degree of background reduction achieved through a combination of underground location, graded shielding, and rejection of cosmic-ray events. Wemore » conclude by presenting measurement targets and future opportunities.« less

Pulsed-laser capabilities at the Laser-Hardened Materials Evaluation Laboratory (LHMEL)

NASA Astrophysics Data System (ADS)

Royse, Robert W.; Seibert, Daniel B., II; Lander, Michael L.; Eric, John J.

2000-08-01

Pulsed laser capabilities at the Laser Hardened Material Evaluation Laboratory are described relevant to optical coupling, impulse generation and laser propulsion. Capabilities of the Nd:Glass laser are presented as well as supporting test systems.

Books Offer Entry into Understanding Cultures.

ERIC Educational Resources Information Center

Van Ausdell, Barbara Wass

1994-01-01

Making classroom materials relevant to students is paramount for one Missouri high school English teacher. Since a relevant curriculum needs more than short stories and essays, she has incorporated books like Ngugi Wa Thiong'o's "Weep Not, Child," Kamala Markandaya's "Nectar in a Sieve," and Charles Dickens's "Tale of Two…

37 CFR 351.5 - Discovery in royalty rate proceedings.

Code of Federal Regulations, 2010 CFR

2010-07-01

... proceedings. 351.5 Section 351.5 Patents, Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF... matter, not privileged, that is relevant to the claim or defense of any party. Relevant information need... information and materials. (1) In any royalty rate proceeding scheduled to commence prior to January 1, 2011...

Singapore Math: Challenging and Relevant Curriculum for the Gifted Learner

ERIC Educational Resources Information Center

Hazelton, Melody; Brearley, Donna

2008-01-01

Teachers know their students must struggle and grapple with authentic tasks in order to grow stronger. Classroom teachers of the gifted know that their students cannot advance cognitively without facing relevant and challenging material that demands higher level thinking and reasoning. Therefore, the teacher of gifted mathematics students must…

Investigation of Deuterium Loaded Materials Subject to X-Ray Exposure

NASA Technical Reports Server (NTRS)

Benyo, Theresa L.; Steinetz, Bruce M.; Hendricks, Robert C.; Martin, Richard E.; Forsley, Lawrence P.; Daniels, Christopher C.; Chait, Arnon; Pines, Vladimir; Pines, Marianna; Penney, Nicholas;

Mapping target signatures via partial unmixing of AVIRIS data

NASA Technical Reports Server (NTRS)

Boardman, Joseph W.; Kruse, Fred A.; Green, Robert O.

1995-01-01

A complete spectral unmixing of a complicated AVIRIS scene may not always be possible or even desired. High quality data of spectrally complex areas are very high dimensional and are consequently difficult to fully unravel. Partial unmixing provides a method of solving only that fraction of the data inversion problem that directly relates to the specific goals of the investigation. Many applications of imaging spectrometry can be cast in the form of the following question: 'Are my target signatures present in the scene, and if so, how much of each target material is present in each pixel?' This is a partial unmixing problem. The number of unmixing endmembers is one greater than the number of spectrally defined target materials. The one additional endmember can be thought of as the composite of all the other scene materials, or 'everything else'. Several workers have proposed partial unmixing schemes for imaging spectrometry data, but each has significant limitations for operational application. The low probability detection methods described by Farrand and Harsanyi and the foreground-background method of Smith et al are both examples of such partial unmixing strategies. The new method presented here builds on these innovative analysis concepts, combining their different positive attributes while attempting to circumvent their limitations. This new method partially unmixes AVIRIS data, mapping apparent target abundances, in the presence of an arbitrary and unknown spectrally mixed background. It permits the target materials to be present in abundances that drive significant portions of the scene covariance. Furthermore it does not require a priori knowledge of the background material spectral signatures. The challenge is to find the proper projection of the data that hides the background variance while simultaneously maximizing the variance amongst the targets.

Biomarkers in Natural Fish Populations Indicate Adverse Biological Effects of Offshore Oil Production

PubMed Central

Balk, Lennart; Hylland, Ketil; Hansson, Tomas; Berntssen, Marc H. G.; Beyer, Jonny; Jonsson, Grete; Melbye, Alf; Grung, Merete; Torstensen, Bente E.; Børseth, Jan Fredrik; Skarphedinsdottir, Halldora; Klungsøyr, Jarle

2011-01-01

Background Despite the growing awareness of the necessity of a sustainable development, the global economy continues to depend largely on the consumption of non-renewable energy resources. One such energy resource is fossil oil extracted from the seabed at offshore oil platforms. This type of oil production causes continuous environmental pollution from drilling waste, discharge of large amounts of produced water, and accidental spills. Methods and principal findings Samples from natural populations of haddock (Melanogrammus aeglefinus) and Atlantic cod (Gadus morhua) in two North Sea areas with extensive oil production were investigated. Exposure to and uptake of polycyclic aromatic hydrocarbons (PAHs) were demonstrated, and biomarker analyses revealed adverse biological effects, including induction of biotransformation enzymes, oxidative stress, altered fatty acid composition, and genotoxicity. Genotoxicity was reflected by a hepatic DNA adduct pattern typical for exposure to a mixture of PAHs. Control material was collected from a North Sea area without oil production and from remote Icelandic waters. The difference between the two control areas indicates significant background pollution in the North Sea. Conclusion It is most remarkable to obtain biomarker responses in natural fish populations in the open sea that are similar to the biomarker responses in fish from highly polluted areas close to a point source. Risk assessment of various threats to the marine fish populations in the North Sea, such as overfishing, global warming, and eutrophication, should also take into account the ecologically relevant impact of offshore oil production. PMID:21625421

Difficulties in diagnosing Marfan syndrome using current FBN1 databases.

PubMed

Groth, Kristian A; Gaustadnes, Mette; Thorsen, Kasper; Østergaard, John R; Jensen, Uffe Birk; Gravholt, Claus H; Andersen, Niels H

2016-01-01

The diagnostic criteria of Marfan syndrome (MFS) highlight the importance of a FBN1 mutation test in diagnosing MFS. As genetic sequencing becomes better, cheaper, and more accessible, the expected increase in the number of genetic tests will become evident, resulting in numerous genetic variants that need to be evaluated for disease-causing effects based on database information. The aim of this study was to evaluate genetic variants in four databases and review the relevant literature. We assessed background data on 23 common variants registered in ESP6500 and classified as causing MFS in the Human Gene Mutation Database (HGMD). We evaluated data in four variant databases (HGMD, UMD-FBN1, ClinVar, and UniProt) according to the diagnostic criteria for MFS and compared the results with the classification of each variant in the four databases. None of the 23 variants was clearly associated with MFS, even though all classifications in the databases stated otherwise. A genetic diagnosis of MFS cannot reliably be based on current variant databases because they contain incorrectly interpreted conclusions on variants. Variants must be evaluated by time-consuming review of the background material in the databases and by combining these data with expert knowledge on MFS. This is a major problem because we expect even more genetic test results in the near future as a result of the reduced cost and process time for next-generation sequencing.Genet Med 18 1, 98-102.

Research methodology in Dentistry: Part I – The essentials and relevance of research

PubMed Central

Krithikadatta, Jogikalmat

2012-01-01

The need for scientific evidence should be the basis of clinical practice. The field of restorative dentistry and endodontics is evolving at a rapid pace, with the introduction of several materials, instruments, and equipments. However, there is minimal information of their relevance in clinical practice. On the one hand, material and laboratory research is critical, however; its translation into clinical practice is not being substantiated enough with clinical research. This four part review series focuses on methods to improve evidence-based practice, by improving methods to integrate laboratory and clinical research. PMID:22368327

Guidelines for Assessment and Abatement of Asbestos-Containing Materials in Buildings.

ERIC Educational Resources Information Center

Pielert, James H.; Mathey, Robert G.

This report presents guidelines, based on available information, for the assessment and abatement of asbestos-containing materials in buildings. Section 1 provides background information on the history and use of asbestos-containing products in buildings, the characteristics of asbestos fibers, products and materials containing asbestos, and…

Data Processing Volume I. Instructor's Guide.

ERIC Educational Resources Information Center

Vittetoe, Jerry

These instructional materials are intended as a guide for the instructor of a block course in introductory vocational data processing. A textbook and supplementary materials of the instructor's choice would probably be used in conjunction with these materials. Topics covered in the 11 units are background and uses of data processing, input/output…

Materials and Equipment: ECI-4. Early Childhood Intervention Catalog Module.

ERIC Educational Resources Information Center

Evans, Joyce; Bricker, Donna

The fourth of seven modules for professionals working with young (birth to age 3) handicapped children provides information on equipment, materials, and activities in early intervention. Background information discusses ways to catalog materials and equipment and describes teaching approaches using toys and manipulatives. A variety of teaching…

Design of structures against fire. Civil engineering/buildings, architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anchor, R.D.; Malhotra, H.L.; Purkiss, J.A.

1986-01-01

The book covers structural design criteria, along with background theory on fire protection methods for structures from a variety of materials, including timber, steel, and concrete. Research on the behavior of structural materials in the presence of fire is highlighted, and the need for fire-resistant materials is addressed.

Material Control and Accounting Design Considerations for High-Temperature Gas Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trond Bjornard; John Hockert

The subject of this report is domestic safeguards and security by design (2SBD) for high-temperature gas reactors, focusing on material control and accountability (MC&A). The motivation for the report is to provide 2SBD support to the Next Generation Nuclear Plant (NGNP) project, which was launched by Congress in 2005. This introductory section will provide some background on the NGNP project and an overview of the 2SBD concept. The remaining chapters focus specifically on design aspects of the candidate high-temperature gas reactors (HTGRs) relevant to MC&A, Nuclear Regulatory Commission (NRC) requirements, and proposed MC&A approaches for the two major HTGR reactormore » types: pebble bed and prismatic. Of the prismatic type, two candidates are under consideration: (1) GA's GT-MHR (Gas Turbine-Modular Helium Reactor), and (2) the Modular High-Temperature Reactor (M-HTR), a derivative of Areva's Antares reactor. The future of the pebble-bed modular reactor (PBMR) for NGNP is uncertain, as the PBMR consortium partners (Westinghouse, PBMR [Pty] and The Shaw Group) were unable to agree on the path forward for NGNP during 2010. However, during the technology assessment of the conceptual design phase (Phase 1) of the NGNP project, AREVA provided design information and technology assessment of their pebble bed fueled plant design called the HTR-Module concept. AREVA does not intend to pursue this design for NGNP, preferring instead a modular reactor based on the prismatic Antares concept. Since MC&A relevant design information is available for both pebble concepts, the pebble-bed HTGRs considered in this report are: (1) Westinghouse PBMR; and (2) AREVA HTR-Module. The DOE Office of Nuclear Energy (DOE-NE) sponsors the Fuel Cycle Research and Development program (FCR&D), which contains an element specifically focused on the domestic (or state) aspects of SBD. This Material Protection, Control and Accountancy Technology (MPACT) program supports the present work summarized in this report, namely the development of guidance to support the consideration of MC&A in the design of both pebble-bed and prismatic-fueled HTGRs. The objective is to identify and incorporate design features into the facility design that will cost effectively aid in making MC&A more effective and efficient, with minimum impact on operations. The theft of nuclear material is addressed through both MC&A and physical protection, while the threat of sabotage is addressed principally through physical protection.« less

The Use of Logistics n the Quality Parameters Control System of Material Flow

ERIC Educational Resources Information Center

Karpova, Natalia P.; Toymentseva, Irina A.; Shvetsova, Elena V.; Chichkina, Vera D.; Chubarkova, Elena V.

2016-01-01

The relevance of the research problem is conditioned on the need to justify the use of the logistics methodologies in the quality parameters control process of material flows. The goal of the article is to develop theoretical principles and practical recommendations for logistical system control in material flows quality parameters. A leading…

Quality Assessment of Internationalised Studies: Theory and Practice

ERIC Educational Resources Information Center

Juknyte-Petreikiene, Inga

2013-01-01

The article reviews forms of higher education internationalisation at an institutional level. The relevance of theoretical background of internationalised study quality assessment is highlighted and definitions of internationalised studies quality are presented. Existing methods of assessment of higher education internationalisation are criticised…

Feminist Therapy with Ethnic Minority Women.

ERIC Educational Resources Information Center

Sieber, Jindra A.; Cairns, Kathleen V.

1991-01-01

Asserts that feminist assumptions about nature, process, and goals of therapy make feminist counseling particularly effective approach for women from diverse racial and cultural backgrounds. Considers feminist interpretation of women's problems from social, political, and economic perspectives to be particularly relevant to experiences and…

Effects of Embedded Processing Tasks on Learning Outcomes.

ERIC Educational Resources Information Center

Hobbs, D. J.

1987-01-01

Describes a British study with undergraduate accountancy students which compared the quantitative and qualitative effects of three types of embedded tasks or questions--relational-semantic, transpose-semantic, and non-semantic--on learning outcomes. Variables investigated included mathematical background, recall, and comprehension. Relevance of…

Contrast ratios and masking ability of three types of ceramic veneers.

PubMed

Chu, Frederick C S; Chow, Tak W; Chai, John

2007-11-01

Although ceramic veneers have been proven to be clinically successful in longevity studies, there is little information on the contrast ratios and masking ability of the available ceramic systems because dental laboratory technology and expensive experimental equipment are required for the investigation. Moreover, the complexity in understanding how to evaluate translucent ceramic materials may also explain why information in this area is limited. The purpose of this study was to determine the contrast ratios and masking abilities of 3 types of all-ceramic veneers by measuring their luminance and color difference over white and black backgrounds. Disk-shaped specimens (8-mm diameter x 0.7-mm thickness) of Shade A2 (Vita Lumin) of 3 types of all-ceramic systems: Procera (n=8), Empress 2 (n=8), and Vitadur Alpha (n=10) were fabricated. The luminance (as Y) and color (as CIE L*a*b*) of the specimens were measured with a colorimeter. The contrast ratio (CR=Yb/Yw), defined as the ratio of illuminance (Y) of the test material when it is placed on the black background (Yb) to the illuminance of the same material when it is placed over a white background (Yw), was determined. The masking ability of a specimen was evaluated by calculating the color difference (DeltaE) of the veneers over white and black backgrounds. Both CR and DeltaE* data were analyzed with 1-way ANOVA and the Tukey HSD test (alpha=.05). The mean contrast ratios (SD) of Procera, Empress 2, and Vitadur Alpha specimens were 0.50 (0.02), 0.46 (0.05), and 0.39 (0.02), respectively. CR values were significantly different among the 3 materials (P<.001). Procera veneers had a significantly higher CR compared to Empress 2 (P=.01) or Vitadur Alpha (P=.01), whereas the CR of Empress 2 was significantly higher than that of Vitadur Alpha (P=.046). Color difference (DeltaE*) (SD) of Procera, Empress 2, and Vitadur Alpha specimens over black and white backgrounds were 24.46 (1.03), 25.80 (1.03), and 31.08 (1.19), respectively. DeltaE* values were statistically different among the 3 materials (P<.001). Vitadur Alpha specimens had significantly higher DeltaE* when compared with Procera (P<.001) or Empress 2 (P<.001), whereas DeltaE* values between Procera and Empress 2 were not significantly different (P=.331). Vitadur Alpha had significantly lower contrast ratio and poorer masking ability compared to Procera or Empress 2. The clinical application of Vitadur Alpha as a veneer material over discolored teeth is cautioned. Although the contrast ratio of Procera was significantly higher than that of Empress 2, the masking abilities of these materials were not significantly different. The clinical application of these 2 ceramics as a veneer material may still be limited when applied over intense tooth discoloration because neither can fully mask the color of a black background.

Metal Matrix Composites: Custom-made Materials for Automotive and Aerospace Engineering

NASA Astrophysics Data System (ADS)

Kainer, Karl U.

2006-02-01

Since the properties of MMCs can be directly designed "into" the material, they can fulfill all the demands set by design engineers. This book surveys the latest results and development possibilities for MMCs as engineering and functional materials, making it of utmost value to all materials scientists and engineers seeking in-depth background information on the potentials these materials have to offer in research, development and design engineering.

The Community College Foundation Manual & Guide.

ERIC Educational Resources Information Center

Anderson, James M., Comp.; Snyder, Tom, Comp.

This collection of resources and information about community college foundations includes brief articles, selected data, materials from foundations, sample mission statements and articles of incorporation, sample forms and correspondence, relevant educational legislation, and other related materials from specific active foundations at two-year…

International Disability Educational Alliance (IDEAnet)

DTIC Science & Technology

2011-03-23

scientists who have graduated from the Field Epidemiology Training Program (FELTP) GUI: Graphical User Interface GIS : Global Implementation Solutions...how to participate in IDEAnet programs, and background information. 47 “Materials for Download ” is used here to denote materials that will be provided...for download and use by interested parties. The materials may include: written/pictorial instructions, articles, videos, images, and other materials

Ethnic Heritage in America, Teacher's Manual: Curriculum Materials in Elementary School Social Studies on Greeks, Jews, Lithuanians, and Ukrainians.

ERIC Educational Resources Information Center

Chicago Consortium for Inter-Ethnic Curriculum Development, IL.

The teacher's manual accompanies the Ethnic Heritage in America curriculum materials for elementary-level social studies. First, the manual presents a background discussion of the materials. The materials resulted from an ethnic education project based on a course for teachers on Community Policies in Ethnic Education at the University of Illinois…

In-Suit Doppler Technology Assessment

NASA Technical Reports Server (NTRS)

Schulze, Arthur E.; Greene, Ernest R.; Nadeau, John J.

1991-01-01

The objective of this program was to perform a technology assessment survey of non-invasive air embolism detection utilizing Doppler ultrasound methodologies. The primary application of this technology will be a continuous monitor for astronauts while performing extravehicular activities (EVA's). The technology assessment was to include: (1) development of a full understanding of all relevant background research; and (2) a survey of the medical ultrasound marketplace for expertise, information, and technical capability relevant to this development. Upon completion of the assessment, LSR was to provide an overview of technological approaches and R&D/manufacturing organizations.

The effectiveness of knowledge translation strategies used in public health: a systematic review

PubMed Central

2012-01-01

Background Literature related to the effectiveness of knowledge translation (KT) strategies used in public health is lacking. The capacity to seek, analyze, and synthesize evidence-based information in public health is linked to greater success in making policy choices that have the best potential to yield positive outcomes for populations. The purpose of this systematic review is to identify the effectiveness of KT strategies used to promote evidence-informed decision making (EIDM) among public health decision makers. Methods A search strategy was developed to identify primary studies published between 2000–2010. Studies were obtained from multiple electronic databases (CINAHL, Medline, EMBASE, and the Cochrane Database of Systematic Reviews). Searches were supplemented by hand searching and checking the reference lists of included articles. Two independent review authors screened studies for relevance, assessed methodological quality of relevant studies, and extracted data from studies using standardized tools. Results After removal of duplicates, the search identified 64, 391 titles related to KT strategies. Following title and abstract review, 346 publications were deemed potentially relevant, of which 5 met all relevance criteria on full text screen. The included publications were of moderate quality and consisted of five primary studies (four randomized controlled trials and one interrupted time series analysis). Results were synthesized narratively. Simple or single KT strategies were shown in some circumstances to be as effective as complex, multifaceted ones when changing practice including tailored and targeted messaging. Multifaceted KT strategies led to changes in knowledge but not practice. Knowledge translation strategies shown to be less effective were passive and included access to registries of pre-processed research evidence or print materials. While knowledge brokering did not have a significant effect generally, results suggested that it did have a positive effect on those organizations that at baseline perceived their organization to place little value on evidence-informed decision making. Conclusions No singular KT strategy was shown to be effective in all contexts. Conclusions about interventions cannot be taken on their own without considering the characteristics of the knowledge that was being transferred, providers, participants and organizations. PMID:22958371

Institutional capacity for health systems research in East and Central Africa schools of public health: enhancing capacity to design and implement teaching programs

PubMed Central

2014-01-01

Background The role of health systems research (HSR) in informing and guiding national programs and policies has been increasingly recognized. Yet, many universities in sub-Saharan African countries have relatively limited capacity to teach HSR. Seven schools of public health (SPHs) in East and Central Africa undertook an HSR institutional capacity assessment, which included a review of current HSR teaching programs. This study determines the extent to which SPHs are engaged in teaching HSR-relevant courses and assessing their capacities to effectively design and implement HSR curricula whose graduates are equipped to address HSR needs while helping to strengthen public health policy. Methods This study used a cross-sectional study design employing both quantitative and qualitative approaches. An organizational profile tool was administered to senior staff across the seven SPHs to assess existing teaching programs. A self-assessment tool included nine questions relevant to teaching capacity for HSR curricula. The analysis triangulates the data, with reflections on the responses from within and across the seven SPHs. Proportions and average of values from the Likert scale are compared to determine strengths and weaknesses, while themes relevant to the objectives are identified and clustered to elicit in-depth interpretation. Results None of the SPHs offer an HSR-specific degree program; however, all seven offer courses in the Master of Public Health (MPH) degree that are relevant to HSR. The general MPH curricula partially embrace principles of competency-based education. Different strengths in curricula design and staff interest in HSR at each SPH were exhibited but a number of common constraints were identified, including out-of-date curricula, face-to-face delivery approaches, inadequate staff competencies, and limited access to materials. Opportunities to align health system priorities to teaching programs include existing networks. Conclusions Each SPH has key strengths that can be leveraged to design and implement HSR teaching curricula. We propose networking for standardizing HSR curricula competencies, institutionalizing sharing of teaching resources, creating an HSR eLearning platform to expand access, regularly reviewing HSR teaching content to infuse competency-based approaches, and strengthening staff capacity to deliver such curricula. PMID:24888353

Improved health-relevant functionality in dark germinated Mucuna pruriens sprouts by elicitation with peptide and phytochemical elicitors.

PubMed

Randhir, Reena; Kwon, Young-In; Shetty, Kalidas

2009-10-01

The health-relevant functionality of Mucuna pruriens was improved by priming the seeds with elicitors of the pentose phosphate pathway (PPP) such as fish protein hydrolysates (FPHs), lactoferrin (LF) and oregano extract (OE) followed by dark germination. FPH elicited the highest phenolic content of 19 mg/g FW on day 1, which was 38% higher than control sprouts. OE enhanced Parkinson's disease-relevant L-DOPA content by 33% on day 1 compared to control sprouts. Anti-diabetes-relevant alpha-amylase inhibition percent (AIP) and alpha-glucosidase inhibition percent (GIP) were high in the cotyledons and decreased following elicitation and sprouting. For potential anti-diabetic applications, low AIP and high GIP with moderate L-DOPA content on day 4 of dark germination could be optimal. Improved L-DOPA concentrations in a soluble phenolic and antioxidant-rich M. pruriens background on day 1 sprouts have potential for Parkinson's disease management.

VIEW LOOKING NORTH ALONG COOMBE AVENUE. NOTE FLAGSTONE PAVING MATERIAL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW LOOKING NORTH ALONG COOMBE AVENUE. NOTE FLAGSTONE PAVING MATERIAL FOR FORMER CEREMONIAL ENTRANCE AND MATURE SOUTHERN MAGNOLIA TREE IN BACKGROUND. - Congressional Cemetery, 1801 E Street, Southeast, Washington, District of Columbia, DC

Defeating camouflage and finding explosives through spectral matched filtering of hyperspectral imagery

NASA Astrophysics Data System (ADS)

Dombrowski, Mark S.; Willson, Paul D.; LaBaw, Clayton C.

1997-01-01

In order to achieve their goal of surreptitious operation within a country, terrorist organizations attempt to hide themselves from public view. In many instances such masking takes the form of simply appearing like the surrounding populace. In others, such as training facilities, standard military camouflaging techniques are used to conceal the group's equipment and activities. To effectively monitor and suppress activities of terrorist organizations, defeating the groups' attempt to hide is essential. Although finding individuals hiding within a society is extremely problematic, discovering camouflaged equipment, facilities, and personnel is readily accomplished by proper exploitation of hyperspectral imagery. Camouflage techniques attempt to make an object appear similar to its background, thereby making it difficult to find. Although making an object have similar color to its background is fairly easy, making it have the same spectral appearance is nearly impossible, unless the object is covered in the same material as the background. Even attempting to hide an object by covering it in background material will not work against a spectral imager since the act of moving the background material, e.g., foliage cuttings, changes the material's spectral characteristics. Hence, by collecting and properly exploiting spectral imagery, camouflaged objects can be readily differentiated from their background. This paper presents development of this technique, and of the MIDIS (multi-band identification and discrimination imaging spectroradiometer) instrument capable of real-time discrimination of camouflaged objects throughout a scene. Spectral matched-filtering of hyperspectral imagery also has the potential to find vehicles or structures which may be laden with explosives. Many explosives contain volatile materials, the release of which can be imaged by viewing appropriate spectral regions. Volatiles from the fuel oil in readily-produced ANFO are an example. If such volatiles were seen emanating from a vehicle or structure where they would not normally be expected, closer inspection would be warranted. Additionally, packing a vehicle with explosives often leaves trace residues on the outside of the vehicle. Spectral imaging and matched filtering can be used to identify these residues. Incorporation of spectral imaging surveillance equipment at probable terrorist targets could avert disasters such as the tragic bombing of the Murrah Federal Building in Oklahoma City. Application of MIDIS technology to explosive identification is also detailed.

Terahertz Time Domain Spectroscopy of Complex Organic Molecules in Astrophysically Relevant Ices

NASA Astrophysics Data System (ADS)

McGuire, Brett A.; Ioppolo, Sergio; Allodi, Marco A.; Kelley, Matthew J.; Blake, Geoffrey A.

2013-06-01

We have constructed a new system to study the spectra of astrophysically-relevant ice analogs using THz time-domain spectroscopy from 300 GHz - 7 THz. Here, we present our initial efforts to explore the spectra of pure ices of simple, abundant interstellar species as well as complex organic molecules (COMs) and COM-doped ice mixtures. We will present preliminary spectra of pure H_2O, CO_2, methanol (CH_3OH), and methyl formate (CH_3COOH) ices, as well as spectra of these molecules embedded in a variety of other relevant interstellar analogs. Our results are discussed in the context of astronomical observations and the possibility of probing ice compositions in the absence of a background radiation source.

IDENTIFYING POTENTIAL SOURCES OF BACKGROUND CONTAMINATION IN RT-PCR

EPA Science Inventory

Extraction of nucleic acids from low biomass samples, such as drinking water, is particularly sensitive to potential background contamination because the contaminating material is minimally diluted by the sample. The presence of bacterial DNA in Taq DNA polymerase is wel...

Solid Lubrication Fundamentals and Applications: Introduction and Background. Revision 1

NASA Technical Reports Server (NTRS)

Miyoshi, Kazuhisa

1998-01-01

This chapter presents an introduction and historical background to the field of tribology, especially solid lubrication and lubricants and sets them in the perspective of techniques and materials in lubrication. Also, solid and liquid lubrication films are defined and described.

Solid Lubrication Fundamentals and Applications. Chapter 1; Introduction and Background

NASA Technical Reports Server (NTRS)

Miyoshi, Kazuhisa

1996-01-01

This chapter presents an introduction and historical background to the field of tribology, especially solid lubrication and lubricants and sets them in the perspective of techniques and materials in lubrication. Also, solid and liquid lubrication films are defined and described.

Pride in Oklahoma.

ERIC Educational Resources Information Center

Moore, Gordon; Blackburn, Bob L.

This booklet is intended to be used as background material by social studies and history classroom teachers as they develop and implement educational programs on Oklahoma's heritage. It includes background information on the land and people of Oklahoma (geology, climate, topography, vegetation, animals, prehistoric peoples, French explorers,…

A SWOT analysis of the organization and financing of the Danish health care system.

PubMed

Christiansen, Terkel

2002-02-01

The organization and financing of the Danish health care system was evaluated within a framework of a SWOT analysis (analysis of Strengths, Weaknesses, Opportunities and Threats) by a panel of five members with a background in health economics. The present paper describes the methods and materials used for the evaluation: selection of panel members, structure of the evaluation task according to the health care triangle model, selection of background material consisting of documents and literature on the Danish health care system, and a 1-week study visit.

The Development of Man and His Culture: Old World Prehistory. Grade 5. Teacher Guide [And] Pupil Text [And] Pupil Guide [And] Teacher Background Material [And] A Sequential Curriculum in Anthropology. Test Form 5, Composite Form for Pre- and Post-Test. Revised, January 1968. Publications No. 25, 31, 23, 24 and 43.

ERIC Educational Resources Information Center

Potterfield, James E.; And Others

This social studies unit includes a teaching guide, student text, study guide, teacher background material, and composite pretest/posttest covering archaeological methods, evolution, fossils and man, and development of culture during the prehistoric periods in the Old World. It is part of the Anthropology Curriculum Project and is designed for…

Impact of Budget Cuts on Children: Background Materials for Joint Hearing of the Subcommittee on Oversight of the Committee on Ways and Means and the Subcommittee on Health and the Environment of the Committee on Energy and Commerce, U.S. House of Representatives, 97th Congress, 2nd Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Ways and Means.

Prepared for joint hearings on the impact of the proposed budget cuts on programs affecting children, these background materials describe the main programs which serve children in five general areas. These areas are health services for mothers and children, child nutrition programs, aid to families with dependent children, day care and other child…

Coherent photon scattering background in sub- GeV / c 2 direct dark matter searches

DOE PAGES

Robinson, Alan E.

2017-01-18

Here, proposed dark matter detectors with eV-scale sensitivities will detect a large background of atomic (nuclear) recoils from coherent photon scattering of MeV-scale photons. This background climbs steeply below ~10 eV, far exceeding the declining rate of low-energy Compton recoils. The upcoming generation of dark matter detectors will not be limited by this background, but further development of eV-scale and sub-eV detectors will require strategies, including the use of low nuclear mass target materials, to maximize dark matter sensitivity while minimizing the coherent photon scattering background.

Quality of Cultural Heritage in EIA; twenty years of experience in Norway

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lindblom, Inge, E-mail: inge.lindblom@niku.no

2012-04-15

The aim of this paper is to clarify and discuss how quality, relevance, attitudes, beliefs and transfer value act as underlying driving forces in the development of the Cultural Heritage theme in EIAs. One purpose is to identify and discuss some conditions that can better environmental assessment in order to increase the significance of EIA in decision-making with regard to Cultural Heritage. The main tools used are different research methods designed for analyses of quality and quality changes, primarily based on the relevant opinions of 160 people occupied with Cultural Heritage in EIA in Norway. The study is based onmore » a review of 40 types of EIAs from 1991 to 2000, an online questionnaire to 319 (160 responded) individuals from 14 different backgrounds, and interviews with three institutions in Sweden and Denmark. The study confirms a steadily increasing quality on EIRs over time, parallel with an improvement of the way in which Cultural Heritage is treated in EIA. This is supported by both the interviews and the qualitative comments regarding the survey. Potential for improvements is shown to be a need for more detailed background material as well as more use of adequate methods. The survey shows the existence of a wide variety of negative views, attitudes and beliefs, but the consequences of this are difficult to evaluate. However, most certainly, negative attitudes and beliefs have not been powerful enough to be detrimental to the quality of Cultural Heritage component, as nothing in the study indicates that negative attitudes and myths are undermining the system of EIA. The study shows the importance of having on-going discussions on quality and quality change over time by people involved in EIA, and how this is a necessary condition for successful implementation and acceptance. Beliefs and negative attitudes can also be a catalyst for developing better practice and advancing new methodology. In addition, new EIA countries must be prepared for several years of development and improvements after implementation. This is important in order to gain acceptance from the bureaucracy, especially from the Cultural Heritage authorities and local population.« less

Bioinspired catalytic materials for energy-relevant conversions

NASA Astrophysics Data System (ADS)

Artero, Vincent

2017-09-01

The structure of active sites of enzymes involved in bioenergetic processes can inspire design of active, stable and cost-effective catalysts for renewable-energy technologies. For these materials to reach maturity, the benefits of bioinspired systems must be combined with practical technological requirements.

Measurement of Aluminum Content In Reflector Materials For The PICO Dark Matter Detector

NASA Astrophysics Data System (ADS)

Borsodi, Haley; PICO Collaboration

2015-04-01

The PICO collaboration uses a bubble chamber technique to search for dark matter particles. Bubbles are registered with cameras, pressure sensors and acoustic transducers. To increase the visual contrast between bubbles and liquid, retro-reflectors are used to diffuse light from LEDs evenly throughout the inner chamber. One must, however, be careful that reflector materials not contribute radioactive background. Light nuclei, such as aluminum, can absorb alpha particles from radioactive contaminants and produce high energy neutron background in the inner volume of the chamber. Since aluminum oxides are a common reflector material and since commercial compositions are trade secrets, we had to demonstrate that the amounts of aluminum in the reflectors was small enough to allow them to be used in the chambers. After acid digesting candidate material strips, they were analyzed using Microwave Plasma Atomic Emission Spectroscopy. All of the proposed materials were found to have less than 1% Aluminum content (by mass), making them safe for use by the experiment. Indiana University South Bend.

Discussing a Philosophical Background for the Ethnomathematical Program

ERIC Educational Resources Information Center

Vilela, Denise Silva

2010-01-01

This article examines the extent to which Wittgenstein's analytical framework may be relevant to philosophical reflection on ethnomathematics. The discussion develops Bill Barton's suggestion that a philosophical basis for the ethnomathematical program should include and explain culturally different mathematics systems, and the coexistence of…

Integrating Creativity into Online University Classes

ERIC Educational Resources Information Center

Muirhead, Brent

2007-01-01

In this article, the author provides a concise discussion on creativity, defining the term, sharing theoretical background information and offering insights into promoting creativity in online university classes. Emphasis will be placed on relevant ways to integrate creativity into instructional activities across the academic disciplines. He…

Formative Justice: The Regulative Principle of Education

ERIC Educational Resources Information Center

McClintock, Robert

2016-01-01

Background/Context: Concepts of justice relevant to making personal and public decisions about education. Purpose: To clarify a concept of formative justice that persons and the public often ignore in making decisions about educational effort. Setting: "The windmills of your mind" Research Design: Reflective essay.…

V-TECS Guide for Bookkeeping/Accounting/Payroll Clerk.

ERIC Educational Resources Information Center

Gregory, Margaret R.; Benson, Robert T.

This guide, an extension of the Vocational-Technical Education Consortium of States (V-TECS) catalog, includes such considerations as background information, decision-making skills, attitudes, and learning methods surrounding the occupations of bookkeeper/accountant/payroll clerk. The guide provides job-relevant task, performance objectives,…

Adolescent Pregnancy: An Inventory of Relevant Federal Programs and Policies.

ERIC Educational Resources Information Center

Moore, Kristin A.

This paper provides an overview of Federal programs related to teenage pregnancy. Primary prevention and ameliorative services are explained to assist fund raisers, counselors, and policymakers in developing appropriate programs. Information is given about legislative background, purpose, eligibility, and disbursement. Programs which provide…

Beating Darwin-Bragg losses in lab-based ultrafast x-ray experiments

PubMed Central

Fullagar, Wilfred K.; Uhlig, Jens; Mandal, Ujjwal; Kurunthu, Dharmalingam; El Nahhas, Amal; Tatsuno, Hideyuki; Honarfar, Alireza; Parnefjord Gustafsson, Fredrik; Sundström, Villy; Palosaari, Mikko R. J.; Kinnunen, Kimmo M.; Maasilta, Ilari J.; Miaja-Avila, Luis; O'Neil, Galen C.; Joe, Young Il; Swetz, Daniel S.; Ullom, Joel N.

2017-01-01

The use of low temperature thermal detectors for avoiding Darwin-Bragg losses in lab-based ultrafast experiments has begun. An outline of the background of this new development is offered, showing the relevant history and initiative taken by this work. PMID:28396880

International Large-Scale Assessments: What Uses, What Consequences?

ERIC Educational Resources Information Center

Johansson, Stefan

2016-01-01

Background: International large-scale assessments (ILSAs) are a much-debated phenomenon in education. Increasingly, their outcomes attract considerable media attention and influence educational policies in many jurisdictions worldwide. The relevance, uses and consequences of these assessments are often the focus of research scrutiny. Whilst some…

Nontraditional Degree Options for Nurses: A Model Program

ERIC Educational Resources Information Center

Walston, Sydney C.

1978-01-01

The Institute for Personal and Career Development of Central Michigan University offers external degree programs for adult learners using nontraditional study. The competency-based programs described include credit given for the educational background and relevant career-life experiences of registered nurses in Michigan. (Author/LBH)

A review of low density porous materials used in laser plasma experiments

NASA Astrophysics Data System (ADS)

Nagai, Keiji; Musgrave, Christopher S. A.; Nazarov, Wigen

2018-03-01

This review describes and categorizes the synthesis and properties of low density porous materials, which are commonly referred to as foams and are utilized for laser plasma experiments. By focusing a high-power laser on a small target composed of these materials, high energy and density states can be produced. In the past decade or so, various new target fabrication techniques have been developed by many laboratories that use high energy lasers and consequently, many publications and reviews followed these developments. However, the emphasis so far has been on targets that did not utilize low density porous materials. This review therefore, attempts to redress this balance and endeavors to review low density materials used in laser plasma experiments in recent years. The emphasis of this review will be on aspects of low density materials that are of relevance to high energy laser plasma experiments. Aspects of low density materials such as densities, elemental compositions, macroscopic structures, nanostructures, and characterization of these materials will be covered. Also, there will be a brief mention of how these aspects affect the results in laser plasma experiments and the constrictions that these requirements put on the fabrication of low density materials relevant to this field. This review is written from the chemists' point of view to aid physicists and the new comers to this field.

The construction of ``realistic'' four-dimensional strings through orbifolds

NASA Astrophysics Data System (ADS)

Font, A.; Ibáñez, L. E.; Quevedo, F.; Sierra, A.

1990-02-01

We discuss the construction of "realistic" lower rank 4-dimensional strings, through symmetric orbifolds with background fields. We present Z 3 three-generation SU(3) × SU(2) × U(1) models as well as models incorporating a left-right SU(2) L × SU(2) R × U(1) B-L symmetry in which proton stability is automatically guaranteed. Conformal field theory selection rules are used to find the flat directions to all orders which lead to these low-rank models and to study the relevant Yukawa couplings. A hierarchical structure of quark-lepton masses appears naturally in some models. We also present a detailed study of the structure of the Z 3 × Z 3 orbifold including the generalized GSO projection, the effect of discrete torsion and the conformal field theory Yukawa coupling selection rules. All these points are illustrated with a three-generation Z 3 × Z 3 model. We have made an effort to write a self-contained presentation in order to make this material available to non-string experts interested in the phenomenological aspects of this theory.

The cicadas (Hemiptera: Cicadidae) of India, Bangladesh, Bhutan, Myanmar, Nepal and Sri Lanka: an annotated provisional catalogue, regional checklist and bibliography

PubMed Central

Allan, Elizabeth Louise; Marathe, Kiran; Sarkar, Vivek; Simon, Chris; Kunte, Krushnamegh

2016-01-01

Abstract Background The cicadas of the Indian subcontinent, like many other insects in the region, have remained understudied since the early part of the 20th Century, and await modern taxonomic, systematic and phylogenetic treatment. This paper presents an updated systematic catalogue of cicadas (Hemiptera: Cicadidae) from India, Bangladesh, Bhutan, Myanmar, Nepal and Sri Lanka, the first in over a century. New information This paper treats 281 species, including: India and Bangladesh (189 species), Bhutan (19 species), Myanmar (81 species), Nepal (46 species) and Sri Lanka (22 species). For each species all recognized junior synonyms are included with information on the type material and additional specimens where relevant. The global distributional range and notes on the taxonomy of each species are included where appropriate. Two lists are provided: (1) species known to occur in India and Bangladesh (treated as a geographic unit), Bhutan, Myanmar, Nepal and Sri Lanka; and (2) species previously listed from these countries in error. A bibliography of species descriptions is provided, with the papers containing the original descriptions provided where copyright allows. PMID:27660527

Do topical applications of bisphosphonates improve bone formation in oral implantology? A systematic review

PubMed Central

Lozano-Carrascal, Naroa; Hernández-Alfaro, Federico; Gehrke, Sergio-Alexandre; Gargallo-Albiol, Jordi; Calvo-Guirado, José-Luis

2017-01-01

Background The aim of this systematic literature review was to evaluate the feasibility of topical bisphosphonate application for preserving/enhancing alveolar bone in oral implantology. Material and Methods An electronic search was conducted in the PubMed/Medline, EMBASE, Scopus, Web of knowledge, and Google-Scholar databases for articles dated from January 2000 to December 2016. Two reviewers assessed the quality of the studies independently. Results A total of 154 abstracts were identified, of which 18 potentially relevant articles were selected; a final total of nine papers were included for analysis. Comparison of the findings of the selected studies was made difficult by the heterogeneity of the articles, all of them animal research papers that showed heterogeneity in the methodologies used and a high or moderate risk of bias. Conclusions The topical application of bisphosphonate solution would appear to favor new bone formation in alveolar defects, and boosts the regenerative capacities of biomaterials resulting in increased bone density. Key words:Alveolar bone, bone regeneration, topical application, biomaterial, bisphosphonates. PMID:28624840

Opinions from ESL Instructors and Students about Curricula on Hepatitis B for Use in Immigrant Communities

PubMed Central

Coronado, Gloria D.; Taylor, Victoria M.; Hislop, T. Gregory; Teh, Chong; Acorda, Elizabeth; Do, H. Hoai; Chen, Hueifang; Thompson, Beti

2010-01-01

Background Chinese immigrants in Canada have a disproportionately high risk for hepatitis B compared with non-Hispanic whites. Hepatitis B is the leading cause of hepatocellular carcinoma among Asian immigrants to North America. English as a Second Language (ESL) classes are an effective way of reaching newly immigrated individuals and are a potential channel for delivering health messages. Methods Using data from six focus groups among ESL instructors and students, we characterized perceptions about activities that are successfully used in ESL classrooms and strategies for delivering hepatitis B information. Results Instructors and students generally reported that activities which focused on speaking and listening skills and that addressed content relevant to students' daily lives were successful in the classroom. Instructors generally avoided material that was irrelevant or too difficult to understand. Focus group participants offered strategies for delivering hepatitis B information in ESL classrooms; these strategies included addressing symptoms and prevention, and not singling out a specific population subgroup in order to avoid stigmatization. Conclusions These findings might assist efforts to develop ESL curricula that target immigrant populations. PMID:18709587

Inverse supercritical fluid extraction as a sample preparation method for the analysis of the nanoparticle content in sunscreen agents.

PubMed

Müller, David; Cattaneo, Stefano; Meier, Florian; Welz, Roland; de Vries, Tjerk; Portugal-Cohen, Meital; Antonio, Diana C; Cascio, Claudia; Calzolai, Luigi; Gilliland, Douglas; de Mello, Andrew

2016-04-01

We demonstrate the use of inverse supercritical carbon dioxide (scCO2) extraction as a novel method of sample preparation for the analysis of complex nanoparticle-containing samples, in our case a model sunscreen agent with titanium dioxide nanoparticles. The sample was prepared for analysis in a simplified process using a lab scale supercritical fluid extraction system. The residual material was easily dispersed in an aqueous solution and analyzed by Asymmetrical Flow Field-Flow Fractionation (AF4) hyphenated with UV- and Multi-Angle Light Scattering detection. The obtained results allowed an unambiguous determination of the presence of nanoparticles within the sample, with almost no background from the matrix itself, and showed that the size distribution of the nanoparticles is essentially maintained. These results are especially relevant in view of recently introduced regulatory requirements concerning the labeling of nanoparticle-containing products. The novel sample preparation method is potentially applicable to commercial sunscreens or other emulsion-based cosmetic products and has important ecological advantages over currently used sample preparation techniques involving organic solvents. Copyright © 2016 Elsevier B.V. All rights reserved.

Communication training for aircrews: A review of theoretical and pragmatic aspects of training program design

NASA Technical Reports Server (NTRS)

Linde, Charlotte; Goguen, Joseph; Devenish, Linda

1987-01-01

This study is the final report of a project studying methods of communications training applicable to both civilian and military aviation personnel, including multiperson teams or single pilot fixed wing or rotary wing aircraft. A review is provided of a number of theories proposed as relevant for producing training materials for improved communications. Criteria are given for evaluating the applicability of training programs to the aviation environment, and these criteria are applied to United Airlines' Resources Management Training, as well as to a number of commercially available general purpose training programs. The report considers in detail assertiveness training and grid management training, examining their theoretical background and attempts made to validate their effectiveness. It was found that there are substantive difficulties in assessing the effectiveness of both training programs, as well as problems with the theories underlying them. However, because the aviation environment offers unique advantages for studying the effectiveness of communications training, recommendations are made on the design of appropriate training programs and on procedures that might be used to validate them.

Purely Cutaneous Rosai-Dorfman Disease with Immunohistochemistry

PubMed Central

Farooq, Uzma; Chacon, Anna H; Vincek, Vladimir; Elgart, George W

2013-01-01

Background: The cutaneous form of Rosai-Dorfman disease (RDD) is a rare entity that manifests solely with skin papules or nodules and does not present with the usual myriad of symptoms of classical RDD. Aims: To analyze the most recent publications regarding cutaneous RDD to point out updated, relevant aspects regarding future directions for clinical recognition and management. To identify histopathologic and immunohistochemical findings in skin lesions that permit diagnosis. Materials and Methods: We present a case of a gentleman with a history of multiple lipomas with a new solitary nodule on physical exam; microscopic examination shows the typical findings of RDD with the associated diagnostic immunohistochemical profile, as well as the expected finding of histiocytes engulfing other intact inflammatory cells. Results: Our patient was managed with surgical excision of the entire lesion, one of the several available treatment options. Long-term follow-up 2 years later did not reveal any complications, recurrences, or new lesions. Conclusion: The diagnosis of cutaneous RDD is differentiated from other histiocytic conditions by the combination of clinical findings accompanied by histopathologic and immunohistochemical confirmation. PMID:24249896

Evaluation of the antifungal activity and modulation between Cajanus cajan (L.) Millsp. leaves and roots ethanolic extracts and conventional antifungals

PubMed Central

Brito, Samara A.; Rodrigues, Fabíola F. G.; Campos, Adriana R.; da Costa, José G. M.

2012-01-01

Background: The use and investigation of natural products with antimicrobial activity from vegeral source have been reported by several researchers. Cajanus cajan (Fabaceae) is a multiple use specie mainly as human food. In popular medicine, diverse parts of the plant are used as sedative and to treat cough, hepatitis, and diabetes. Materials and Methods: This study shows the characterization of secondary metabolites present in ehtanolic extracts from leaves and roots of Cajanus cajan by phytochemical prospection. The evaluation of the antifungal activity was performed by the microdilution method, and from the subinhibitory concentrations (MIC 1/8) the modulatory activity of antifungical (fluconazole and ketoconazole) was analyzed by the direct contact assay against C. albicans ATCC40006, Candida krusei ATCC 6538 and Candida tropicalis ATCC 40042. Results: The results showed the presence of tannins, flavonoids, and alkaloids in both extracts as the clinically relevant antifungal activity. The modulatory potential is presented by the antifungal tested against yeasts. Conclusion: The extracts studied here have demonstrated to be a new therapeutic source to treat these microorganism-associated diseases. PMID:22701281

Comparative 454 pyrosequencing of transcripts from two olive genotypes during fruit development

PubMed Central

Alagna, Fiammetta; D'Agostino, Nunzio; Torchia, Laura; Servili, Maurizio; Rao, Rosa; Pietrella, Marco; Giuliano, Giovanni; Chiusano, Maria Luisa; Baldoni, Luciana; Perrotta, Gaetano

2009-01-01

Background Despite its primary economic importance, genomic information on olive tree is still lacking. 454 pyrosequencing was used to enrich the very few sequence data currently available for the Olea europaea species and to identify genes involved in expression of fruit quality traits. Results Fruits of Coratina, a widely cultivated variety characterized by a very high phenolic content, and Tendellone, an oleuropein-lacking natural variant, were used as starting material for monitoring the transcriptome. Four different cDNA libraries were sequenced, respectively at the beginning and at the end of drupe development. A total of 261,485 reads were obtained, for an output of about 58 Mb. Raw sequence data were processed using a four step pipeline procedure and data were stored in a relational database with a web interface. Conclusion Massively parallel sequencing of different fruit cDNA collections has provided large scale information about the structure and putative function of gene transcripts accumulated during fruit development. Comparative transcript profiling allowed the identification of differentially expressed genes with potential relevance in regulating the fruit metabolism and phenolic content during ripening. PMID:19709400

Time-resolved detection of aromatic compounds on planetary surfaces by ultraviolet laser induced fluorescence and Raman spectroscopy

NASA Astrophysics Data System (ADS)

Eshelman, E.; Daly, M. G.; Slater, G.; Cloutis, E.

2015-12-01

Raman spectroscopic instruments are highly capable in the search for organics on Mars due to the potential to perform rapid and nondestructive measurements on unprepared samples. Upcoming and future Raman instruments are likely to also incorporate laser-induced fluorescence (LIF) capabilities, which can be added for modest cost and complexity. We demonstrate that it is possible to obtain sub-ns fluorescence lifetime measurements of Mars-relevant organics and minerals if a fast time-gating capability is used with an intensified detector and a short ultraviolet laser pulse. This serves a primary purpose of discriminating mineral from short-lived (less than 10 ns) organic fluorescence, considered a potential biosignature. Additionally, lifetime measurements may assist in determining if more than one fluorescing species is present and provide information concerning the molecular structure as well as the local environment. Fast time-gating is also useful at longer visible or near-IR wavelengths, as this approach increases the sensitivity of the instrument to organic material by removing the majority of the fluorescence background from the Raman signal and reducing the effect of ambient light.

The 13C(n,α0)10Be cross section at 14.3 MeV and 17 MeV neutron energy

NASA Astrophysics Data System (ADS)

Kavrigin, P.; Belloni, F.; Frais-Koelbl, H.; Griesmayer, E.; Plompen, A. J. M.; Schillebeeckx, P.; Weiss, C.

2017-09-01

At nuclear fusion reactors, CVD diamond detectors are considered an advantageous solution for neutron flux monitoring. For such applications the knowledge of the cross section of neutron-induced nuclear reactions on natural carbon are of high importance. Especially the (n,α0) reactions, yielding the highest energy reaction products, are of relevance as they can be clearly distinguished in the spectrum. The 13C(n,α0)10Be cross section was measured relative to 12C(n,α0)9Be at the Van de Graaff facility of EC-JRC Geel, Belgium, at 14.3 MeV and 17.0 MeV neutron energies. The measurement was performed with an sCVD (single-crystal Chemical Vapor Deposition) diamond detector, where the detector material acted simultaneously as sample and as sensor. A novel data analysis technique, based on pulse-shape discrimination, allowed an efficient reduction of background events. The results of the measurement are presented and compared to previously published values for this cross-section.

[Access to sexual health care for women who have sex with women in São Paulo, Brazil].

PubMed

Barbosa, Regina Maria; Facchini, Regina

2009-01-01

This article focuses on the relationship between health care for women who have sex with women and representations of gender, sexuality, and the body. The study used ethnographic observation and in-depth interviews held from 2003 to 2006, with 30 women ranging from 18 to 45 years of age, belonging to different social segments, backgrounds, and sexual identities, living in Greater Metropolitan São Paulo. Analysis of the material pointed to greater difficulty in accessing gynecological care for lower-income women, those who had never had sex with men, or those with masculine body language. Not only the negative representations and experiences in relation to health services, but also identity constructions concerning gender and sexuality, are related to difficulties in accessing health care. Although a large share of the relevant international literature emphasizes the relationship between homophobia and decreased access to health services, the findings suggest that although situations involving discrimination are a reality, they were not considered impediments to the search for care, and were more associated with reporting of erotic practices and preferences at the services.

Explosives signatures and analysis

NASA Astrophysics Data System (ADS)

Fountain, Augustus Way, III; Oyler, Jonathan M.; Ostazeski, Stanley A.

2008-04-01

The challenge of sampling explosive materials for various high threat military and civilian operational scenarios requires the community to identify and exploit other chemical compounds within the mixtures that may be available to support stand-off detection techniques. While limited surface and vapor phase characterization of IEDs exist, they are insufficient to guide the future development and evaluation of field deployable explosives detection (proximity and standoff) capabilities. ECBC has conducted a limited investigation of three artillery ammunition types to determine what chemical vapors, if any, are available for sensing; the relative composition of the vapors which includes the more volatile compounds in munitions, i.e., plastersizers and binders; and the sensitivity needed detect these vapors at stand-off. Also in partnership with MIT-Lincoln Laboratory, we performed a background measurement campaign at the National Training Center to determine the baseline ambient amounts and variability of nitrates and nitro-ester compounds as vapors, particulates, and on surfaces; as well as other chemical compounds related to non-energetic explosive additives. Environmental persistence studies in contexts relevant to counter-IED sensing operations, such as surface residues, are still necessary.

Management of extrapulmonary sarcoidosis: challenges and solutions

PubMed Central

Al-Kofahi, Khalid; Korsten, Peter; Ascoli, Christian; Virupannavar, Shanti; Mirsaeidi, Mehdi; Chang, Ian; Qaqish, Naim; Saketkoo, Lesley A; Baughman, Robert P; Sweiss, Nadera J

2016-01-01

Background Sarcoidosis is a chronic multisystem disease of unknown etiology characterized by noncaseating granulomas that most often involves the lungs, but frequently has extrapulmonary manifestations, which might be difficult to treat in individual patients. Objective To review different disease manifestations, focusing on extrapulmonary organ systems, and to provide treatment options for refractory cases. Materials and methods We performed a literature search using Medline and Google Scholar for individual or combined keywords of “sarcoidosis, extrapulmonary, treatment, kidney, neurosarcoidosis, cardiovascular, gastrointestinal, transplantation, musculoskeletal, rheumatology, arthritis, and skin”. Peer-reviewed articles, including review articles, clinical trials, observational trials, and case reports that were published in English were included. References from retrieved articles were also manually searched for relevant articles. Results and conclusion Isolated involvement of a single organ or organ system is rare in sarcoidosis, and thus all patients must be thoroughly evaluated for additional disease manifestations. Cardiac sarcoidosis and neurosarcoidosis may be life-threatening. Clinicians need to assess patients comprehensively using clinical, laboratory, imaging, and histopathological data to recommend competently the best and least toxic treatment option for the individual patient. PMID:27853374

An appraisal of an online tutorial system for the teaching and learning of engineering physics in conjunction with contextual physics and mathematics, and relevant mathematics

NASA Astrophysics Data System (ADS)

Bhathal, Ragbir

2016-09-01

The number of students entering engineering schools in Australian universities has increased tremendously over the last few years because of the Australian Federal Government's policy of increasing the participation rates of Higher School Certificate students and students from low social economic status backgrounds in the tertiary sector. They now come with a diverse background of skills, motivations and prior knowledge. It is imperative that new methods of teaching and learning be developed. This paper describes an online tutorial system used in conjunction with contextual physics and mathematics, and the revision of the relevant mathematical knowledge at the appropriate time before a new topic is introduced in the teaching and learning of engineering physics. Taken as a whole, this study shows that students not only improved their final examination results but there was also an increase in the retention rate of first-year engineering students which has financial implications for the university.

Heat input and accumulation for ultrashort pulse processing with high average power

NASA Astrophysics Data System (ADS)

Finger, Johannes; Bornschlegel, Benedikt; Reininghaus, Martin; Dohrn, Andreas; Nießen, Markus; Gillner, Arnold; Poprawe, Reinhart

2018-05-01

Materials processing using ultrashort pulsed laser radiation with pulse durations <10 ps is known to enable very precise processing with negligible thermal load. However, even for the application of picosecond and femtosecond laser radiation, not the full amount of the absorbed energy is converted into ablation products and a distinct fraction of the absorbed energy remains as residual heat in the processed workpiece. For low average power and power densities, this heat is usually not relevant for the processing results and dissipates into the workpiece. In contrast, when higher average powers and repetition rates are applied to increase the throughput and upscale ultrashort pulse processing, this heat input becomes relevant and significantly affects the achieved processing results. In this paper, we outline the relevance of heat input for ultrashort pulse processing, starting with the heat input of a single ultrashort laser pulse. Heat accumulation during ultrashort pulse processing with high repetition rate is discussed as well as heat accumulation for materials processing using pulse bursts. In addition, the relevance of heat accumulation with multiple scanning passes and processing with multiple laser spots is shown.

Foreground-background segmentation and attention: a change blindness study.

PubMed

Mazza, Veronica; Turatto, Massimo; Umiltà, Carlo

2005-01-01

One of the most debated questions in visual attention research is what factors affect the deployment of attention in the visual scene? Segmentation processes are influential factors, providing candidate objects for further attentional selection, and the relevant literature has concentrated on how figure-ground segmentation mechanisms influence visual attention. However, another crucial process, namely foreground-background segmentation, seems to have been neglected. By using a change blindness paradigm, we explored whether attention is preferentially allocated to the foreground elements or to the background ones. The results indicated that unless attention was voluntarily deployed to the background, large changes in the color of its elements remained unnoticed. In contrast, minor changes in the foreground elements were promptly reported. Differences in change blindness between the two regions of the display indicate that attention is, by default, biased toward the foreground elements. This also supports the phenomenal observations made by Gestaltists, who demonstrated the greater salience of the foreground than the background.

Stochastic background from cosmic (super)strings: Popcorn-like and (Gaussian) continuous regimes

NASA Astrophysics Data System (ADS)

Regimbau, Tania; Giampanis, Stefanos; Siemens, Xavier; Mandic, Vuk

2012-03-01

In the era of the next generation of gravitational wave experiments a stochastic background from cusps of cosmic (super)strings is expected to be probed and, if not detected, to be significantly constrained. A popcornlike background can be, for part of the parameter space, as pronounced as the (Gaussian) continuous contribution from unresolved sources that overlap in frequency and time. We study both contributions from unresolved cosmic string cusps over a range of frequencies relevant to ground based interferometers, such as the LIGO/Virgo second generation and Einstein Telescope third generation detectors, the space antenna LISA, and pulsar timing arrays. We compute the sensitivity (at the 2σ level) in the parameter space for the LIGO/Virgo second generation detector, the Einstein Telescope detector, LISA, and pulsar timing arrays. We conclude that the popcorn regime is complementary to the continuous background. Its detection could therefore enhance confidence in a stochastic background detection and possibly help determine fundamental string parameters such as the string tension and the reconnection probability.

Intelligent medical information filtering.

PubMed

Quintana, Y

1998-01-01

This paper describes an intelligent information filtering system to assist users to be notified of updates to new and relevant medical information. Among the major problems users face is the large volume of medical information that is generated each day, and the need to filter and retrieve relevant information. The Internet has dramatically increased the amount of electronically accessible medical information and reduced the cost and time needed to publish. The opportunity of the Internet for the medical profession and consumers is to have more information to make decisions and this could potentially lead to better medical decisions and outcomes. However, without the assistance from professional medical librarians, retrieving new and relevant information from databases and the Internet remains a challenge. Many physicians do not have access to the services of a medical librarian. Most physicians indicate on surveys that they do not prefer to retrieve the literature themselves, or visit libraries because of the lack of recent materials, poor organisation and indexing of materials, lack of appropriate and available material, and lack of time. The information filtering system described in this paper records the online web browsing behaviour of each user and creates a user profile of the index terms found on the web pages visited by the user. A relevance-ranking algorithm then matches the user profiles to the index terms of new health care web pages that are added each day. The system creates customised summaries of new information for each user. A user can then connect to the web site to read the new information. Relevance feedback buttons on each page ask the user to rate the usefulness of the page to their immediate information needs. Errors in relevance ranking are reduced in this system by having both the user profile and medical information represented in the same representation language using a controlled vocabulary. This system also updates the user profiles, automatically relieving this burden from the user, but also allowing the user to explicitly state preferences. An initial evaluation of this system was done with health consumers using a web site on consumer health. It was found that users often modified their criteria for what they considered relevant not only between browsing sessions but also during a session. A user's criteria for what is relevant is constantly changing as they interact with the information. New revised metrics of recall and precision are needed to account for the partially relevant judgements and the dynamically changing criteria of users. Future research, development, and evaluation of interactive information retrieval systems will need to take into account the users' dynamically changing criteria of relevance.

DNDO Report: Predicting Solar Modulation Potentials for Modeling Cosmic Background Radiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Behne, Patrick Alan

The modeling of the detectability of special nuclear material (SNM) at ports and border crossings requires accurate knowledge of the background radiation at those locations. Background radiation originates from two main sources, cosmic and terrestrial. Cosmic background is produced by high-energy galactic cosmic rays (GCR) entering the atmosphere and inducing a cascade of particles that eventually impact the earth’s surface. The solar modulation potential represents one of the primary inputs to modeling cosmic background radiation. Usosokin et al. formally define solar modulation potential as “the mean energy loss [per unit charge] of a cosmic ray particle inside the heliosphere…” Modulationmore » potential, a function of elevation, location, and time, shares an inverse relationship with cosmic background radiation. As a result, radiation detector thresholds require adjustment to account for differing background levels, caused partly by differing solar modulations. Failure to do so can result in higher rates of false positives and failed detection of SNM for low and high levels of solar modulation potential, respectively. This study focuses on solar modulation’s time dependence, and seeks the best method to predict modulation for future dates using Python. To address the task of predicting future solar modulation, we utilize both non-linear least squares sinusoidal curve fitting and cubic spline interpolation. This material will be published in transactions of the ANS winter meeting of November, 2016.« less

Optical method for determining the mechanical properties of a material

DOEpatents

Maris, H.J.; Stoner, R.J.

1998-12-01

Disclosed is a method for characterizing a sample, comprising the steps of: (a) acquiring data from the sample using at least one probe beam wavelength to measure, for times less than a few nanoseconds, a change in the reflectivity of the sample induced by a pump beam; (b) analyzing the data to determine at least one material property by comparing a background signal component of the data with data obtained for a similar delay time range from one or more samples prepared under conditions known to give rise to certain physical and chemical material properties; and (c) analyzing a component of the measured time dependent reflectivity caused by ultrasonic waves generated by the pump beam using the at least one determined material property. The first step of analyzing may include a step of interpolating between reference samples to obtain an intermediate set of material properties. The material properties may include sound velocity, density, and optical constants. In one embodiment, only a correlation is made with the background signal, and at least one of the structural phase, grain orientation, and stoichiometry is determined. 14 figs.

Optical method for determining the mechanical properties of a material

DOEpatents

Maris, Humphrey J.; Stoner, Robert J.

1998-01-01

Disclosed is a method for characterizing a sample, comprising the steps of: (a) acquiring data from the sample using at least one probe beam wavelength to measure, for times less than a few nanoseconds, a change in the reflectivity of the sample induced by a pump beam; (b) analyzing the data to determine at least one material property by comparing a background signal component of the data with data obtained for a similar delay time range from one or more samples prepared under conditions known to give rise to certain physical and chemical material properties; and (c) analyzing a component of the measured time dependent reflectivity caused by ultrasonic waves generated by the pump beam using the at least one determined material property. The first step of analyzing may include a step of interpolating between reference samples to obtain an intermediate set of material properties. The material properties may include sound velocity, density, and optical constants. In one embodiment, only a correlation is made with the background signal, and at least one of the structural phase, grain orientation, and stoichiometry is determined.

Hydrogen isotopes transport parameters in fusion reactor materials

NASA Astrophysics Data System (ADS)

Serra, E.; Benamati, G.; Ogorodnikova, O. V.

1998-06-01

This work presents a review of hydrogen isotopes-materials interactions in various materials of interest for fusion reactors. The relevant parameters cover mainly diffusivity, solubility, trap concentration and energy difference between trap and solution sites. The list of materials includes the martensitic steels (MANET, Batman and F82H-mod.), beryllium, aluminium, beryllium oxide, aluminium oxide, copper, tungsten and molybdenum. Some experimental work on the parameters that describe the surface effects is also mentioned.

Workshop on Measurement Needs for Local-Structure Determination in Inorganic Materials

PubMed Central

Levin, Igor; Vanderah, Terrell

2008-01-01

The functional responses (e.g., dielectric, magnetic, catalytic, etc.) of many industrially-relevant materials are controlled by their local structure—a term that refers to the atomic arrangements on a scale ranging from atomic (sub-nanometer) to several nanometers. Thus, accurate knowledge of local structure is central to understanding the properties of nanostructured materials, thereby placing the problem of determining atomic positions on the nanoscale—the so-called “nanostructure problem”—at the center of modern materials development. Today, multiple experimental techniques exist for probing local atomic arrangements; nonetheless, finding accurate comprehensive, and robust structural solutions for the nanostructured materials still remains a formidable challenge because any one of these methods yields only a partial view of the local structure. The primary goal of this 2-day NIST-sponsored workshop was to bring together experts in the key experimental and theoretical areas relevant to local-structure determination to devise a strategy for the collaborative effort required to develop a comprehensive measurement solution on the local scale. The participants unanimously agreed that solving the nanostructure problem—an ultimate frontier in materials characterization—necessitates a coordinated interdisciplinary effort that transcends the existing capabilities of any single institution, including national laboratories, centers, and user facilities. The discussions converged on an institute dedicated to local structure determination as the most viable organizational platform for successfully addressing the nanostructure problem. The proposed “institute” would provide an intellectual infrastructure for local structure determination by (1) developing and maintaining relevant computer software integrated in an open-source global optimization framework (Fig. 2), (2) connecting industrial and academic users with experts in measurement techniques, (3) developing and maintaining pertinent databases, and (4) providing necessary education and training. PMID:27096131

Basic Research Plan, February 2003

DTIC Science & Technology

2003-02-01

consistent. This effort includes the nitration , crystallization, and coating of CL–20. Under Army sponsor- ship, a process for the nitration of CL–20 has...actuators • Multiscale computational design of structural materials with embedded functionality • Materials with embedded electrical/magnetic/optical...the innovative use of biology to produce unique materials and processes of mili- tary relevance; to increase economic and environmental affordability

Validation of the Instructional Materials Motivation Survey (IMMS) in a Self-Directed Instructional Setting Aimed at Working with Technology

ERIC Educational Resources Information Center

Loorbach, Nicole; Peters, Oscar; Karreman, Joyce; Steehouder, Michaël

2015-01-01

The ARCS Model of Motivational Design has been used myriad times to design motivational instructions that focus on attention, relevance, confidence and satisfaction in order to motivate students. The Instructional Materials Motivation Survey (IMMS) is a 36-item situational measure of people's reactions to instructional materials in the light…

A Selected Annotated Bibliography of Material Relating to Racism, Blacks, Chicanos, Native Americans and Multi-Ethnicity. Vol. 4.

ERIC Educational Resources Information Center

Michigan Education Association, East Lansing. Div. of Minority Affairs.

Volume Four of this selected annotated bibliography is composed of the most recently discovered materials, pertaining to blacks, Latinos, Native Americans, multi-ethnicity and racism. Like the three previous annotated bibliographies, it is considered to reflect only that material which is held to be most representative and most relevant in terms…

A Rule-Based System for Hybrid Search and Delivery of Learning Objects to Learners

ERIC Educational Resources Information Center

Biletskiy, Yevgen; Baghi, Hamidreza; Steele, Jarrett; Vovk, Ruslan

2012-01-01

Purpose: Presently, searching the internet for learning material relevant to ones own interest continues to be a time-consuming task. Systems that can suggest learning material (learning objects) to a learner would reduce time spent searching for material, and enable the learner to spend more time for actual learning. The purpose of this paper is…

A Selected Annotated Bibliography of Material Relating to Racism, Blacks, Chicanos, Native Americans and Multi-Ethnicity. Vol. 3.

ERIC Educational Resources Information Center

Michigan Education Association, East Lansing. Div. of Minority Affairs.

The third in the series, this selected annotated bibliography is composed of the most recently discovered materials pertaining to Blacks, Latinos, Native Americans, multi-ethnicity, and racism. It is said to reflect only that material considered most representative and most relevant in terms of the involvement and contributions that Third World…