The Importance of HRA in Human Space Flight: Understanding the Risks

NASA Technical Reports Server (NTRS)

Hamlin, Teri

2010-01-01

Human performance is critical to crew safety during space missions. Humans interact with hardware and software during ground processing, normal flight, and in response to events. Human interactions with hardware and software can cause Loss of Crew and/or Vehicle (LOCV) through improper actions, or may prevent LOCV through recovery and control actions. Humans have the ability to deal with complex situations and system interactions beyond the capability of machines. Human Reliability Analysis (HRA) is a method used to qualitatively and quantitatively assess the occurrence of human failures that affect availability and reliability of complex systems. Modeling human actions with their corresponding failure probabilities in a Probabilistic Risk Assessment (PRA) provides a more complete picture of system risks and risk contributions. A high-quality HRA can provide valuable information on potential areas for improvement, including training, procedures, human interfaces design, and the need for automation. Modeling human error has always been a challenge in part because performance data is not always readily available. For spaceflight, the challenge is amplified not only because of the small number of participants and limited amount of performance data available, but also due to the lack of definition of the unique factors influencing human performance in space. These factors, called performance shaping factors in HRA terminology, are used in HRA techniques to modify basic human error probabilities in order to capture the context of an analyzed task. Many of the human error modeling techniques were developed within the context of nuclear power plants and therefore the methodologies do not address spaceflight factors such as the effects of microgravity and longer duration missions. This presentation will describe the types of human error risks which have shown up as risk drivers in the Shuttle PRA which may be applicable to commercial space flight. As with other large PRAs of complex machines, human error in the Shuttle PRA proved to be an important contributor (12 percent) to LOCV. An existing HRA technique was adapted for use in the Shuttle PRA, but additional guidance and improvements are needed to make the HRA task in space-related PRAs easier and more accurate. Therefore, this presentation will also outline plans for expanding current HRA methodology to more explicitly cover spaceflight performance shaping factors.

The Use of Empirical Data Sources in HRA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruce Hallbert; David Gertman; Julie Marble

This paper presents a review of available information related to human performance to support Human Reliability Analysis (HRA) performed for nuclear power plants (NPPs). A number of data sources are identified as potentially useful. These include NPP licensee event reports (LERs), augmented inspection team (AIT) reports, operator requalification data, results from the literature in experimental psychology, and the Aviation Safety Reporting System (ASRSs). The paper discusses how utilizing such information improves our capability to model and quantify human performance. In particular the paper discusses how information related to performance shaping factors (PSFs) can be extracted from empirical data to determinemore » their size effect, their relative effects, as well as their interactions. The paper concludes that appropriate use of existing sources can help addressing some of the important issues we are currently facing in HRA.« less

Tailoring a Human Reliability Analysis to Your Industry Needs

NASA Technical Reports Server (NTRS)

DeMott, D. L.

2016-01-01

Companies at risk of accidents caused by human error that result in catastrophic consequences include: airline industry mishaps, medical malpractice, medication mistakes, aerospace failures, major oil spills, transportation mishaps, power production failures and manufacturing facility incidents. Human Reliability Assessment (HRA) is used to analyze the inherent risk of human behavior or actions introducing errors into the operation of a system or process. These assessments can be used to identify where errors are most likely to arise and the potential risks involved if they do occur. Using the basic concepts of HRA, an evolving group of methodologies are used to meet various industry needs. Determining which methodology or combination of techniques will provide a quality human reliability assessment is a key element to developing effective strategies for understanding and dealing with risks caused by human errors. There are a number of concerns and difficulties in "tailoring" a Human Reliability Assessment (HRA) for different industries. Although a variety of HRA methodologies are available to analyze human error events, determining the most appropriate tools to provide the most useful results can depend on industry specific cultures and requirements. Methodology selection may be based on a variety of factors that include: 1) how people act and react in different industries, 2) expectations based on industry standards, 3) factors that influence how the human errors could occur such as tasks, tools, environment, workplace, support, training and procedure, 4) type and availability of data, 5) how the industry views risk & reliability, and 6) types of emergencies, contingencies and routine tasks. Other considerations for methodology selection should be based on what information is needed from the assessment. If the principal concern is determination of the primary risk factors contributing to the potential human error, a more detailed analysis method may be employed versus a requirement to provide a numerical value as part of a probabilistic risk assessment. Industries involved with humans operating large equipment or transport systems (ex. railroads or airlines) would have more need to address the man machine interface than medical workers administering medications. Human error occurs in every industry; in most cases the consequences are relatively benign and occasionally beneficial. In cases where the results can have disastrous consequences, the use of Human Reliability techniques to identify and classify the risk of human errors allows a company more opportunities to mitigate or eliminate these types of risks and prevent costly tragedies.

Multi-Unit Considerations for Human Reliability Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

St. Germain, S.; Boring, R.; Banaseanu, G.

This paper uses the insights from the Standardized Plant Analysis Risk-Human Reliability Analysis (SPAR-H) methodology to help identify human actions currently modeled in the single unit PSA that may need to be modified to account for additional challenges imposed by a multi-unit accident as well as identify possible new human actions that might be modeled to more accurately characterize multi-unit risk. In identifying these potential human action impacts, the use of the SPAR-H strategy to include both errors in diagnosis and errors in action is considered as well as identifying characteristics of a multi-unit accident scenario that may impact themore » selection of the performance shaping factors (PSFs) used in SPAR-H. The lessons learned from the Fukushima Daiichi reactor accident will be addressed to further help identify areas where improved modeling may be required. While these multi-unit impacts may require modifications to a Level 1 PSA model, it is expected to have much more importance for Level 2 modeling. There is little currently written specifically about multi-unit HRA issues. A review of related published research will be presented. While this paper cannot answer all issues related to multi-unit HRA, it will hopefully serve as a starting point to generate discussion and spark additional ideas towards the proper treatment of HRA in a multi-unit PSA.« less

Panel Discussion: New Directions in Human Reliability Analysis for Oil & Gas, Cybersecurity, Nuclear, and Aviation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harold S. Blackman; Ronald Boring; Julie L. Marble

This panel will discuss what new directions are necessary to maximize the usefulness of HRA techniques across different areas of application. HRA has long been a part of Probabilistic Risk Assessment in the nuclear industry as it offers a superior standard for risk-based decision-making. These techniques are continuing to be adopted by other industries including oil & gas, cybersecurity, nuclear, and aviation. Each participant will present his or her ideas concerning industry needs followed by a discussion about what research is needed and the necessity to achieve cross industry collaboration.

The assessment of cervical sensory motor control: a systematic review focusing on measuring methods and their clinimetric characteristics.

PubMed

Michiels, Sarah; De Hertogh, Willem; Truijen, Steven; November, Danny; Wuyts, Floris; Van de Heyning, Paul

2013-05-01

Cervical sensorimotor control (CSMC) becomes increasingly important in the assessment and treatment of patients with neck pain. This review aims to compare commonly used CSMC measuring methods in terms of required tasks, measuring device and clinimetric properties. A systematic review of two databases, followed by methodological quality assessment (CBO guidelines). The methodological quality of 34 included articles was generally good (five to seven out of eight), the inter-rater agreement was excellent (κw=0.966, p<0.01). Following tasks were found: head repositioning accuracy to the neutral head position (HRA-to-NHP) and to a target position (HRA-to-target), a virtual reality test, a continuous linear movement technique (CLMT) and an object following non-linear movement technique (NLMT) (The Fly™). Test-retest reliability was fair to excellent (ICC 0.35-0.87) for the HRA-to-NHP, very bad to excellent (ICC 0.01-0.90) for the HRA-to-target, fair to good (ICC 0.25-0.77) for the virtual reality test and moderate to excellent (ICC: 0.60-0.86) for The Fly™. The reliability of the CLMT was not documented. The HRA-to-NHP, The Fly™ and the CLMT can discriminate between patients with neck complaints and controls (discriminant validity). Currently, only The Fly™ can discriminate between different patient populations (post-traumatic and non-traumatic neck pain). The sensitivity, specificity and responsiveness of the methods have to be assessed in future research. The dynamic method The Fly™ appears to be more reliable than the HRA-to-NHP and is able to discriminate between different patient populations. The diagnostic potential is to be confirmed in future research. Copyright © 2012 Elsevier B.V. All rights reserved.

STAMP-Based HRA Considering Causality Within a Sociotechnical System: A Case of Minuteman III Missile Accident.

PubMed

Rong, Hao; Tian, Jin

2015-05-01

The study contributes to human reliability analysis (HRA) by proposing a method that focuses more on human error causality within a sociotechnical system, illustrating its rationality and feasibility by using a case of the Minuteman (MM) III missile accident. Due to the complexity and dynamics within a sociotechnical system, previous analyses of accidents involving human and organizational factors clearly demonstrated that the methods using a sequential accident model are inadequate to analyze human error within a sociotechnical system. System-theoretic accident model and processes (STAMP) was used to develop a universal framework of human error causal analysis. To elaborate the causal relationships and demonstrate the dynamics of human error, system dynamics (SD) modeling was conducted based on the framework. A total of 41 contributing factors, categorized into four types of human error, were identified through the STAMP-based analysis. All factors are related to a broad view of sociotechnical systems, and more comprehensive than the causation presented in the accident investigation report issued officially. Recommendations regarding both technical and managerial improvement for a lower risk of the accident are proposed. The interests of an interdisciplinary approach provide complementary support between system safety and human factors. The integrated method based on STAMP and SD model contributes to HRA effectively. The proposed method will be beneficial to HRA, risk assessment, and control of the MM III operating process, as well as other sociotechnical systems. © 2014, Human Factors and Ergonomics Society.

EPRI/NRC-RES fire human reliability analysis guidelines.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lewis, Stuart R.; Cooper, Susan E.; Najafi, Bijan

2010-03-01

During the 1990s, the Electric Power Research Institute (EPRI) developed methods for fire risk analysis to support its utility members in the preparation of responses to Generic Letter 88-20, Supplement 4, 'Individual Plant Examination - External Events' (IPEEE). This effort produced a Fire Risk Assessment methodology for operations at power that was used by the majority of U.S. nuclear power plants (NPPs) in support of the IPEEE program and several NPPs overseas. Although these methods were acceptable for accomplishing the objectives of the IPEEE, EPRI and the U.S. Nuclear Regulatory Commission (NRC) recognized that they required upgrades to support currentmore » requirements for risk-informed, performance-based (RI/PB) applications. In 2001, EPRI and the USNRC's Office of Nuclear Regulatory Research (RES) embarked on a cooperative project to improve the state-of-the-art in fire risk assessment to support a new risk-informed environment in fire protection. This project produced a consensus document, NUREG/CR-6850 (EPRI 1011989), entitled 'Fire PRA Methodology for Nuclear Power Facilities' which addressed fire risk for at power operations. NUREG/CR-6850 developed high level guidance on the process for identification and inclusion of human failure events (HFEs) into the fire PRA (FPRA), and a methodology for assigning quantitative screening values to these HFEs. It outlined the initial considerations of performance shaping factors (PSFs) and related fire effects that may need to be addressed in developing best-estimate human error probabilities (HEPs). However, NUREG/CR-6850 did not describe a methodology to develop best-estimate HEPs given the PSFs and the fire-related effects. In 2007, EPRI and RES embarked on another cooperative project to develop explicit guidance for estimating HEPs for human failure events under fire generated conditions, building upon existing human reliability analysis (HRA) methods. This document provides a methodology and guidance for conducting a fire HRA. This process includes identification and definition of post-fire human failure events, qualitative analysis, quantification, recovery, dependency, and uncertainty. This document provides three approaches to quantification: screening, scoping, and detailed HRA. Screening is based on the guidance in NUREG/CR-6850, with some additional guidance for scenarios with long time windows. Scoping is a new approach to quantification developed specifically to support the iterative nature of fire PRA quantification. Scoping is intended to provide less conservative HEPs than screening, but requires fewer resources than a detailed HRA analysis. For detailed HRA quantification, guidance has been developed on how to apply existing methods to assess post-fire fire HEPs.« less

Task Decomposition in Human Reliability Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boring, Ronald Laurids; Joe, Jeffrey Clark

2014-06-01

In the probabilistic safety assessments (PSAs) used in the nuclear industry, human failure events (HFEs) are determined as a subset of hardware failures, namely those hardware failures that could be triggered by human action or inaction. This approach is top-down, starting with hardware faults and deducing human contributions to those faults. Elsewhere, more traditionally human factors driven approaches would tend to look at opportunities for human errors first in a task analysis and then identify which of those errors is risk significant. The intersection of top-down and bottom-up approaches to defining HFEs has not been carefully studied. Ideally, both approachesmore » should arrive at the same set of HFEs. This question remains central as human reliability analysis (HRA) methods are generalized to new domains like oil and gas. The HFEs used in nuclear PSAs tend to be top-down— defined as a subset of the PSA—whereas the HFEs used in petroleum quantitative risk assessments (QRAs) are more likely to be bottom-up—derived from a task analysis conducted by human factors experts. The marriage of these approaches is necessary in order to ensure that HRA methods developed for top-down HFEs are also sufficient for bottom-up applications.« less

The SACADA database for human reliability and human performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Y. James Chang; Dennis Bley; Lawrence Criscione

2014-05-01

Lack of appropriate and sufficient human performance data has been identified as a key factor affecting human reliability analysis (HRA) quality especially in the estimation of human error probability (HEP). The Scenario Authoring, Characterization, and Debriefing Application (SACADA) database was developed by the U.S. Nuclear Regulatory Commission (NRC) to address this data need. An agreement between NRC and the South Texas Project Nuclear Operating Company (STPNOC) was established to support the SACADA development with aims to make the SACADA tool suitable for implementation in the nuclear power plants' operator training program to collect operator performance information. The collected data wouldmore » support the STPNOC's operator training program and be shared with the NRC for improving HRA quality. This paper discusses the SACADA data taxonomy, the theoretical foundation, the prospective data to be generated from the SACADA raw data to inform human reliability and human performance, and the considerations on the use of simulator data for HRA. Each SACADA data point consists of two information segments: context and performance results. Context is a characterization of the performance challenges to task success. The performance results are the results of performing the task. The data taxonomy uses a macrocognitive functions model for the framework. At a high level, information is classified according to the macrocognitive functions of detecting the plant abnormality, understanding the abnormality, deciding the response plan, executing the response plan, and team related aspects (i.e., communication, teamwork, and supervision). The data are expected to be useful for analyzing the relations between context, error modes and error causes in human performance.« less

A Mid-Layer Model for Human Reliability Analysis: Understanding the Cognitive Causes of Human Failure Events

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stacey M. L. Hendrickson; April M. Whaley; Ronald L. Boring

The Office of Nuclear Regulatory Research (RES) is sponsoring work in response to a Staff Requirements Memorandum (SRM) directing an effort to establish a single human reliability analysis (HRA) method for the agency or guidance for the use of multiple methods. As part of this effort an attempt to develop a comprehensive HRA qualitative approach is being pursued. This paper presents a draft of the method’s middle layer, a part of the qualitative analysis phase that links failure mechanisms to performance shaping factors. Starting with a Crew Response Tree (CRT) that has identified human failure events, analysts identify potential failuremore » mechanisms using the mid-layer model. The mid-layer model presented in this paper traces the identification of the failure mechanisms using the Information-Diagnosis/Decision-Action (IDA) model and cognitive models from the psychological literature. Each failure mechanism is grouped according to a phase of IDA. Under each phase of IDA, the cognitive models help identify the relevant performance shaping factors for the failure mechanism. The use of IDA and cognitive models can be traced through fault trees, which provide a detailed complement to the CRT.« less

A mid-layer model for human reliability analysis : understanding the cognitive causes of human failure events.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shen, Song-Hua; Chang, James Y. H.; Boring,Ronald L.

2010-03-01

The Office of Nuclear Regulatory Research (RES) at the US Nuclear Regulatory Commission (USNRC) is sponsoring work in response to a Staff Requirements Memorandum (SRM) directing an effort to establish a single human reliability analysis (HRA) method for the agency or guidance for the use of multiple methods. As part of this effort an attempt to develop a comprehensive HRA qualitative approach is being pursued. This paper presents a draft of the method's middle layer, a part of the qualitative analysis phase that links failure mechanisms to performance shaping factors. Starting with a Crew Response Tree (CRT) that has identifiedmore » human failure events, analysts identify potential failure mechanisms using the mid-layer model. The mid-layer model presented in this paper traces the identification of the failure mechanisms using the Information-Diagnosis/Decision-Action (IDA) model and cognitive models from the psychological literature. Each failure mechanism is grouped according to a phase of IDA. Under each phase of IDA, the cognitive models help identify the relevant performance shaping factors for the failure mechanism. The use of IDA and cognitive models can be traced through fault trees, which provide a detailed complement to the CRT.« less

Science Based Human Reliability Analysis: Using Digital Nuclear Power Plant Simulators for Human Reliability Research

NASA Astrophysics Data System (ADS)

Shirley, Rachel Elizabeth

Nuclear power plant (NPP) simulators are proliferating in academic research institutions and national laboratories in response to the availability of affordable, digital simulator platforms. Accompanying the new research facilities is a renewed interest in using data collected in NPP simulators for Human Reliability Analysis (HRA) research. An experiment conducted in The Ohio State University (OSU) NPP Simulator Facility develops data collection methods and analytical tools to improve use of simulator data in HRA. In the pilot experiment, student operators respond to design basis accidents in the OSU NPP Simulator Facility. Thirty-three undergraduate and graduate engineering students participated in the research. Following each accident scenario, student operators completed a survey about perceived simulator biases and watched a video of the scenario. During the video, they periodically recorded their perceived strength of significant Performance Shaping Factors (PSFs) such as Stress. This dissertation reviews three aspects of simulator-based research using the data collected in the OSU NPP Simulator Facility: First, a qualitative comparison of student operator performance to computer simulations of expected operator performance generated by the Information Decision Action Crew (IDAC) HRA method. Areas of comparison include procedure steps, timing of operator actions, and PSFs. Second, development of a quantitative model of the simulator bias introduced by the simulator environment. Two types of bias are defined: Environmental Bias and Motivational Bias. This research examines Motivational Bias--that is, the effect of the simulator environment on an operator's motivations, goals, and priorities. A bias causal map is introduced to model motivational bias interactions in the OSU experiment. Data collected in the OSU NPP Simulator Facility are analyzed using Structural Equation Modeling (SEM). Data include crew characteristics, operator surveys, and time to recognize and diagnose the accident in the scenario. These models estimate how the effects of the scenario conditions are mediated by simulator bias, and demonstrate how to quantify the strength of the simulator bias. Third, development of a quantitative model of subjective PSFs based on objective data (plant parameters, alarms, etc.) and PSF values reported by student operators. The objective PSF model is based on the PSF network in the IDAC HRA method. The final model is a mixed effects Bayesian hierarchical linear regression model. The subjective PSF model includes three factors: The Environmental PSF, the simulator Bias, and the Context. The Environmental Bias is mediated by an operator sensitivity coefficient that captures the variation in operator reactions to plant conditions. The data collected in the pilot experiments are not expected to reflect professional NPP operator performance, because the students are still novice operators. However, the models used in this research and the methods developed to analyze them demonstrate how to consider simulator bias in experiment design and how to use simulator data to enhance the technical basis of a complex HRA method. The contributions of the research include a framework for discussing simulator bias, a quantitative method for estimating simulator bias, a method for obtaining operator-reported PSF values, and a quantitative method for incorporating the variability in operator perception into PSF models. The research demonstrates applications of Structural Equation Modeling and hierarchical Bayesian linear regression models in HRA. Finally, the research demonstrates the benefits of using student operators as a test platform for HRA research.

Defining Human Failure Events for Petroleum Risk Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronald L. Boring; Knut Øien

2014-06-01

In this paper, an identification and description of barriers and human failure events (HFEs) for human reliability analysis (HRA) is performed. The barriers, called target systems, are identified from risk significant accident scenarios represented as defined situations of hazard and accident (DSHAs). This report serves as the foundation for further work to develop petroleum HFEs compatible with the SPAR-H method and intended for reuse in future HRAs.

Top-down and bottom-up definitions of human failure events in human reliability analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boring, Ronald Laurids

2014-10-01

In the probabilistic risk assessments (PRAs) used in the nuclear industry, human failure events (HFEs) are determined as a subset of hardware failures, namely those hardware failures that could be triggered by human action or inaction. This approach is top-down, starting with hardware faults and deducing human contributions to those faults. Elsewhere, more traditionally human factors driven approaches would tend to look at opportunities for human errors first in a task analysis and then identify which of those errors is risk significant. The intersection of top-down and bottom-up approaches to defining HFEs has not been carefully studied. Ideally, both approachesmore » should arrive at the same set of HFEs. This question is crucial, however, as human reliability analysis (HRA) methods are generalized to new domains like oil and gas. The HFEs used in nuclear PRAs tend to be top-down—defined as a subset of the PRA—whereas the HFEs used in petroleum quantitative risk assessments (QRAs) often tend to be bottom-up—derived from a task analysis conducted by human factors experts. The marriage of these approaches is necessary in order to ensure that HRA methods developed for top-down HFEs are also sufficient for bottom-up applications.« less

Temporal uncertainty analysis of human errors based on interrelationships among multiple factors: a case of Minuteman III missile accident.

PubMed

Rong, Hao; Tian, Jin; Zhao, Tingdi

2016-01-01

In traditional approaches of human reliability assessment (HRA), the definition of the error producing conditions (EPCs) and the supporting guidance are such that some of the conditions (especially organizational or managerial conditions) can hardly be included, and thus the analysis is burdened with incomprehensiveness without reflecting the temporal trend of human reliability. A method based on system dynamics (SD), which highlights interrelationships among technical and organizational aspects that may contribute to human errors, is presented to facilitate quantitatively estimating the human error probability (HEP) and its related variables changing over time in a long period. Taking the Minuteman III missile accident in 2008 as a case, the proposed HRA method is applied to assess HEP during missile operations over 50 years by analyzing the interactions among the variables involved in human-related risks; also the critical factors are determined in terms of impact that the variables have on risks in different time periods. It is indicated that both technical and organizational aspects should be focused on to minimize human errors in a long run. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Probabilistic risk assessment for a loss of coolant accident in McMaster Nuclear Reactor and application of reliability physics model for modeling human reliability

NASA Astrophysics Data System (ADS)

Ha, Taesung

A probabilistic risk assessment (PRA) was conducted for a loss of coolant accident, (LOCA) in the McMaster Nuclear Reactor (MNR). A level 1 PRA was completed including event sequence modeling, system modeling, and quantification. To support the quantification of the accident sequence identified, data analysis using the Bayesian method and human reliability analysis (HRA) using the accident sequence evaluation procedure (ASEP) approach were performed. Since human performance in research reactors is significantly different from that in power reactors, a time-oriented HRA model (reliability physics model) was applied for the human error probability (HEP) estimation of the core relocation. This model is based on two competing random variables: phenomenological time and performance time. The response surface and direct Monte Carlo simulation with Latin Hypercube sampling were applied for estimating the phenomenological time, whereas the performance time was obtained from interviews with operators. An appropriate probability distribution for the phenomenological time was assigned by statistical goodness-of-fit tests. The human error probability (HEP) for the core relocation was estimated from these two competing quantities: phenomenological time and operators' performance time. The sensitivity of each probability distribution in human reliability estimation was investigated. In order to quantify the uncertainty in the predicted HEPs, a Bayesian approach was selected due to its capability of incorporating uncertainties in model itself and the parameters in that model. The HEP from the current time-oriented model was compared with that from the ASEP approach. Both results were used to evaluate the sensitivity of alternative huinan reliability modeling for the manual core relocation in the LOCA risk model. This exercise demonstrated the applicability of a reliability physics model supplemented with a. Bayesian approach for modeling human reliability and its potential usefulness of quantifying model uncertainty as sensitivity analysis in the PRA model.

Determination of inadvertent atrial capture during para-Hisian pacing.

PubMed

Obeyesekere, Manoj; Leong-Sit, Peter; Skanes, Allan; Krahn, Andrew; Yee, Raymond; Gula, Lorne J; Bennett, Matthew; Klein, George J

2011-08-01

Inadvertent capture of the atrium will lead to spurious results during para-Hisian pacing. We sought to establish whether the stimulation-to-atrial electrogram interval at the proximal coronary sinus (stim-PCS) or high right atrium (stim-HRA) could signal inadvertent atrial capture. Para-Hisian pacing with and without intentional atrial capture was performed in 31 patients. Stim-HRA and stim-PCS intervals were measured with atrial capture, His plus para-Hisian ventricular (H+V) capture, and para-Hisian ventricular (V) capture alone. The mean stim-HRA interval was significantly shorter with atrial capture (66 ± 18 ms) than with H+V (121 ± 27 ms, P < 0.001) or V capture alone (174 ± 38 ms, P < 0.001). The mean stim-PCS interval was significantly shorter with atrial capture (51 ± 16 ms) than with H+V (92 ± 22 ms, P<0.001) or V capture alone (146 ± 33 ms, P < 0.001). A stim-PCS < 60 ms (stim-HRA < 70 ms) was observed only with atrial capture. A stim-PCS >90 ms (stim-HRA >100 ms) was observed only in the absence of atrial capture. A stim-HRA of < 85 ms was highly specific and stim-PCS of < 85 ms highly sensitive at identifying atrial capture. Stim-HRA intervals of 75 to 97 ms and stim-PCS intervals of 65 to 88 ms were observed with either atrial, His, or para-Hisian ventricular capture without atrial capture. In this overlap zone, all patients demonstrated a stim-PCS or stim-HRA interval prolongation of at least 20 ms when the catheter was advanced to avoid deliberate atrial pacing. The QRS morphology was of limited value in distinguishing atrial capture due to concurrent ventricular or H+V capture, as observed in 20 of 31 (65%) patients. Stim-PCS and stim-HRA intervals can be used to monitor for inadvertent atrial capture during para-Hisian pacing. A stim-PCS < 60 ms (or stim-HRA < 70 ms) and stim-PCS > 90 ms (or stim-HRA > 100 ms) were observed only with and without atrial capture, respectively, but there was significant overlap between these values. Deliberate atrial capture and loss of capture reliably identifies atrial capture regardless of intervals.

IDHEAS – A NEW APPROACH FOR HUMAN RELIABILITY ANALYSIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

G. W. Parry; J.A Forester; V.N. Dang

2013-09-01

This paper describes a method, IDHEAS (Integrated Decision-Tree Human Event Analysis System) that has been developed jointly by the US NRC and EPRI as an improved approach to Human Reliability Analysis (HRA) that is based on an understanding of the cognitive mechanisms and performance influencing factors (PIFs) that affect operator responses. The paper describes the various elements of the method, namely the performance of a detailed cognitive task analysis that is documented in a crew response tree (CRT), and the development of the associated time-line to identify the critical tasks, i.e. those whose failure results in a human failure eventmore » (HFE), and an approach to quantification that is based on explanations of why the HFE might occur.« less

Resource utilization, costs and treatment patterns of switching and discontinuing treatment of MS patients with high relapse activity.

PubMed

Raimundo, Karina; Tian, Haijun; Zhou, Huanxue; Zhang, Xin; Kahler, Kristijan H; Agashivala, Neetu; Kim, Edward

2013-04-08

Multiple sclerosis (MS) is a chronic disease that affects mainly adults in the prime of their lives. However, few studies report the impact of high annual relapse rates on outcomes. The purpose of this study was to identify high relapse activity (HRA) in patients with MS, comparing differences in outcomes between patients with and without HRA. A retrospective longitudinal study was conducted using the MarketScan® Commercial Claims and Encounters and Medicare Supplemental Database. Patients had to have at least one ICD-9 for MS (340.XX) in 2009 and one in 2008, be older than 18 years, and have continuous enrolment in the years 2009-2010. HRA was defined as having ≥2 relapses in 2009. Multivariate analyses compared all-cause and MS-specific emergency room (ER) visits, hospitalizations, and all-cause costs, excluding disease modifying therapy (DMT) costs, in 2010 between patients with and without HRA, controlling for baseline characteristics. A subgroup analysis using treatment exposure was also performed. 19,219 patients were included: 5.3% (n=1,017) had ≥2 relapses in 2009. Patients with HRA were more likely to have all-cause and MS-specific resource utilization than patients without HRA. Mean total all-cause non DMT costs were $12,057 higher for the HRA group. In the subgroup analysis, HRA treatment-naïve patients were more likely to start treatment, and HRA treatment-experienced patients were more likely to discontinue or switch index DMT (P<0.01). Patients with ≥2 relapses annually have higher resource utilization and costs. The difference in cost was over twice as large in treatment-naïve patients versus treatment-experienced patients. HRA was also associated with an increased likelihood of starting DMT treatment (treatment-naïve patients), and switching or discontinuing DMT therapy (treatment-experienced patients).

Extracting and Converting Quantitative Data into Human Error Probabilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tuan Q. Tran; Ronald L. Boring; Jeffrey C. Joe

2007-08-01

This paper discusses a proposed method using a combination of advanced statistical approaches (e.g., meta-analysis, regression, structural equation modeling) that will not only convert different empirical results into a common metric for scaling individual PSFs effects, but will also examine the complex interrelationships among PSFs. Furthermore, the paper discusses how the derived statistical estimates (i.e., effect sizes) can be mapped onto a HRA method (e.g. SPAR-H) to generate HEPs that can then be use in probabilistic risk assessment (PRA). The paper concludes with a discussion of the benefits of using academic literature in assisting HRA analysts in generating sound HEPsmore » and HRA developers in validating current HRA models and formulating new HRA models.« less

Culture Representation in Human Reliability Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

David Gertman; Julie Marble; Steven Novack

Understanding human-system response is critical to being able to plan and predict mission success in the modern battlespace. Commonly, human reliability analysis has been used to predict failures of human performance in complex, critical systems. However, most human reliability methods fail to take culture into account. This paper takes an easily understood state of the art human reliability analysis method and extends that method to account for the influence of culture, including acceptance of new technology, upon performance. The cultural parameters used to modify the human reliability analysis were determined from two standard industry approaches to cultural assessment: Hofstede’s (1991)more » cultural factors and Davis’ (1989) technology acceptance model (TAM). The result is called the Culture Adjustment Method (CAM). An example is presented that (1) reviews human reliability assessment with and without cultural attributes for a Supervisory Control and Data Acquisition (SCADA) system attack, (2) demonstrates how country specific information can be used to increase the realism of HRA modeling, and (3) discusses the differences in human error probability estimates arising from cultural differences.« less

Do the potential benefits of metal-on-metal hip resurfacing justify the increased cost and risk of complications?

PubMed

Bozic, Kevin J; Pui, Christine M; Ludeman, Matthew J; Vail, Thomas P; Silverstein, Marc D

2010-09-01

Metal-on-metal hip resurfacing arthroplasty (MoM HRA) may offer potential advantages over total hip arthroplasty (THA) for certain patients with advanced osteoarthritis of the hip. However, the cost effectiveness of MoM HRA compared with THA is unclear. The purpose of this study was to compare the clinical effectiveness and cost-effectiveness of MoM HRA to THA. A Markov decision model was constructed to compare the quality-adjusted life-years (QALYs) and costs associated with HRA versus THA from the healthcare system perspective over a 30-year time horizon. We performed sensitivity analyses to evaluate the impact of patient characteristics, clinical outcome probabilities, quality of life and costs on the discounted incremental costs, incremental clinical effectiveness, and the incremental cost-effectiveness ratio (ICER) of HRA compared to THA. MoM HRA was associated with modest improvements in QALYs at a small incremental cost, and had an ICER less than $50,000 per QALY gained for men younger than 65 and for women younger than 55. MoM HRA and THA failure rates, device costs, and the difference in quality of life after conversion from HRA to THA compared to primary THA had the largest impact on costs and quality of life. MoM HRA could be clinically advantageous and cost-effective in younger men and women. Further research on the comparative effectiveness of MoM HRA versus THA should include assessments of the quality of life and resource use in addition to the clinical outcomes associated with both procedures. Level I, economic and decision analysis. See Guidelines for Authors for a complete description of levels of evidence.

Assessing the Reliability of Regional Depth-Duration-Frequency Equations for Gauged and Ungauged Sites

NASA Astrophysics Data System (ADS)

Castellarin, A.; Montanari, A.; Brath, A.

2002-12-01

The study derives Regional Depth-Duration-Frequency (RDDF) equations for a wide region of northern-central Italy (37,200 km 2) by following an adaptation of the approach originally proposed by Alila [WRR, 36(7), 2000]. The proposed RDDF equations have a rather simple structure and allow an estimation of the design storm, defined as the rainfall depth expected for a given storm duration and recurrence interval, in any location of the study area for storm durations from 1 to 24 hours and for recurrence intervals up to 100 years. The reliability of the proposed RDDF equations represents the main concern of the study and it is assessed at two different levels. The first level considers the gauged sites and compares estimates of the design storm obtained with the RDDF equations with at-site estimates based upon the observed annual maximum series of rainfall depth and with design storm estimates resulting from a regional estimator recently developed for the study area through a Hierarchical Regional Approach (HRA) [Gabriele and Arnell, WRR, 27(6), 1991]. The second level performs a reliability assessment of the RDDF equations for ungauged sites by means of a jack-knife procedure. Using the HRA estimator as a reference term, the jack-knife procedure assesses the reliability of design storm estimates provided by the RDDF equations for a given location when dealing with the complete absence of pluviometric information. The results of the analysis show that the proposed RDDF equations represent practical and effective computational means for producing a first guess of the design storm at the available raingauges and reliable design storm estimates for ungauged locations. The first author gratefully acknowledges D.H. Burn for sponsoring the submission of the present abstract.

Results of a nuclear power plant application of A New Technique for Human Error Analysis (ATHEANA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitehead, D.W.; Forester, J.A.; Bley, D.C.

1998-03-01

A new method to analyze human errors has been demonstrated at a pressurized water reactor (PWR) nuclear power plant. This was the first application of the new method referred to as A Technique for Human Error Analysis (ATHEANA). The main goals of the demonstration were to test the ATHEANA process as described in the frame-of-reference manual and the implementation guideline, test a training package developed for the method, test the hypothesis that plant operators and trainers have significant insight into the error-forcing-contexts (EFCs) that can make unsafe actions (UAs) more likely, and to identify ways to improve the method andmore » its documentation. A set of criteria to evaluate the success of the ATHEANA method as used in the demonstration was identified. A human reliability analysis (HRA) team was formed that consisted of an expert in probabilistic risk assessment (PRA) with some background in HRA (not ATHEANA) and four personnel from the nuclear power plant. Personnel from the plant included two individuals from their PRA staff and two individuals from their training staff. Both individuals from training are currently licensed operators and one of them was a senior reactor operator on shift until a few months before the demonstration. The demonstration was conducted over a 5-month period and was observed by members of the Nuclear Regulatory Commission`s ATHEANA development team, who also served as consultants to the HRA team when necessary. Example results of the demonstration to date, including identified human failure events (HFEs), UAs, and EFCs are discussed. Also addressed is how simulator exercises are used in the ATHEANA demonstration project.« less

Differing Developmental Trajectories in Heart Rate Responses to Speech Stimuli in Infants at High and Low Risk for Autism Spectrum Disorder.

PubMed

Perdue, Katherine L; Edwards, Laura A; Tager-Flusberg, Helen; Nelson, Charles A

2017-08-01

We investigated heart rate (HR) in infants at 3, 6, 9, and 12 months of age, at high (HRA) and low (LRC) familial risk for ASD, to identify potential endophenotypes of ASD risk related to attentional responses. HR was extracted from functional near-infrared spectroscopy recordings while infants listened to speech stimuli. Longitudinal analysis revealed that HRA infants and males generally had lower baseline HR than LRC infants and females. HRA infants showed decreased HR responses to early trials over development, while LRC infants showed increased responses. These findings suggest altered developmental trajectories in physiological responses to speech stimuli over the first year of life, with HRA infants showing less social orienting over time.

Science-based HRA: experimental comparison of operator performance to IDAC (Information-Decision-Action Crew) simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shirley, Rachel; Smidts, Carol; Boring, Ronald

Information-Decision-Action Crew (IDAC) operator model simulations of a Steam Generator Tube Rupture are compared to student operator performance in studies conducted in the Ohio State University’s Nuclear Power Plant Simulator Facility. This study is presented as a prototype for conducting simulator studies to validate key aspects of Human Reliability Analysis (HRA) methods. Seven student operator crews are compared to simulation results for crews designed to demonstrate three different decision-making strategies. The IDAC model used in the simulations is modified slightly to capture novice behavior rather that expert operators. Operator actions and scenario pacing are compared. A preliminary review of availablemore » performance shaping factors (PSFs) is presented. After the scenario in the NPP Simulator Facility, student operators review a video of the scenario and evaluate six PSFs at pre-determined points in the scenario. This provides a dynamic record of the PSFs experienced by the OSU student operators. In this preliminary analysis, Time Constraint Load (TCL) calculated in the IDAC simulations is compared to TCL reported by student operators. We identify potential modifications to the IDAC model to develop an “IDAC Student Operator Model.” This analysis provides insights into how similar experiments could be conducted using expert operators to improve the fidelity of IDAC simulations.« less

Association of Wage With Employee Participation in Health Assessments and Biometric Screening.

PubMed

Sherman, Bruce W; Addy, Carol

2018-02-01

To understand differences in health risk assessment (HRA) and biometric screening participation rates among benefits-enrolled employees in association with wage category. Cross-sectional analysis of employee eligibility file and health benefits (wellness and claims) data. Data from self-insured employers participating in the RightOpt private exchange (Conduent HR Services) during 2014. Active employees from 4 companies continuously enrolled in health insurance for which wage data were available. Measures included HRA and biometric screening participation rates and wage status, with employee age, sex, employer, job tenure, household income, geographic location, and health benefits deductible as a percentage of total wages serving as covariates. Employees were separated into 5 groups based on wage status. Logistic regression analysis incorporated other measures as covariates to adjust for differences between groups, with HRA and biometric screening participation rates determined as binary outcomes. Participation rates for HRA and biometric screening were 90% and 87%, respectively, in the highest wage category, decreasing to 67% and 60%, respectively, among the lowest wage category. Employee wage status is associated with significant differences in HRA and biometric participation rates. Generalizing the results generated by modest participation in these offerings to entire populations may risk misinterpretation of results based on variable participation rates across wage categories.

Lost in Translation: the Case for Integrated Testing

NASA Technical Reports Server (NTRS)

Young, Aaron

2017-01-01

The building of a spacecraft is complex and often involves multiple suppliers and companies that have their own designs and processes. Standards have been developed across the industries to reduce the chances for critical flight errors at the system level, but the spacecraft is still vulnerable to the introduction of critical errors during integration of these systems. Critical errors can occur at any time during the process and in many cases, human reliability analysis (HRA) identifies human error as a risk driver. Most programs have a test plan in place that is intended to catch these errors, but it is not uncommon for schedule and cost stress to result in less testing than initially planned. Therefore, integrated testing, or "testing as you fly," is essential as a final check on the design and assembly to catch any errors prior to the mission. This presentation will outline the unique benefits of integrated testing by catching critical flight errors that can otherwise go undetected, discuss HRA methods that are used to identify opportunities for human error, lessons learned and challenges over ownership of testing will be discussed.

Risk of Metachronous High-Risk Adenomas and Large Serrated Polyps in Individuals With Serrated Polyps on Index Colonoscopy: Data From the New Hampshire Colonoscopy Registry.

PubMed

Anderson, Joseph C; Butterly, Lynn F; Robinson, Christina M; Weiss, Julia E; Amos, Christopher; Srivastava, Amitabh

2018-01-01

Surveillance guidelines for serrated polyps (SPs) are based on limited data on longitudinal outcomes of patients. We used the New Hampshire Colonoscopy Registry to evaluate risk of clinically important metachronous lesions associated with SPs detected during index colonoscopies. We collected data from a population-based colonoscopy registry that has been collecting and analyzing data on colonoscopies across the state of New Hampshire since 2004, including rates of adenoma and SP detection. Patients completed a questionnaire to determine demographic characteristics, health history, and risk factors for colorectal cancer, and were followed from index colonoscopy through all subsequent surveillance colonoscopies. Our analyses included 5433 participants (median age, 61 years; 49.7% male) with 2 colonoscopies (median time to surveillance, 4.9 years). We used multivariable logistic regression models to assess effects of index SPs (n = 1016), high-risk adenomas (HRA, n = 817), low-risk adenomas (n = 1418), and no adenomas (n = 3198) on subsequent HRA or large SPs (>1 cm) on surveillance colonoscopy (metachronous lesions). Synchronous SPs, within each index risk group, were assessed for size and by histology. SPs comprise hyperplastic polyps, sessile serrated adenomas/polyps (SSA/Ps), and traditional serrated adenomas. In this study, SSA/Ps and traditional serrated adenomas are referred to collectively as STSAs. HRA and synchronous large SP (odds ratio [OR], 5.61; 95% confidence interval [CI], 1.72-18.28), HRA with synchronous STSA (OR, 16.04; 95% CI, 6.95-37.00), and HRA alone (OR, 3.86; 95% CI, 2.77-5.39) at index colonoscopy significantly increased the risk of metachronous HRA compared to the reference group (no index adenomas or SPs). Large index SPs alone (OR, 14.34; 95% CI, 5.03-40.86) or index STSA alone (OR, 9.70; 95% CI, 3.63-25.92) significantly increased the risk of a large metachronous SP. In an analysis of data from a population-based colonoscopy registry, we found index large SP or index STSA with no index HRA increased risk of metachronous large SPs but not metachronous HRA. HRA and synchronous SPs at index colonoscopy significantly increased risk of metachronous HRA. Individuals with HRA and synchronous large SP or any STSA could therefore benefit from close surveillance. Copyright © 2018 AGA Institute. Published by Elsevier Inc. All rights reserved.

Evaluation of End-User Satisfaction Among Employees Participating in a Web-based Health Risk Assessment With Tailored Feedback

PubMed Central

Colkesen, Ersen B; Niessen, Maurice AJ; Kraaijenhagen, Roderik A; Essink-Bot, Marie-Louise; Peek, Niels

2012-01-01

Background Web technology is increasingly being used to provide individuals with health risk assessments (HRAs) with tailored feedback. End-user satisfaction is an important determinant of the potential impact of HRAs, as this influences program attrition and adherence to behavioral advice. Objective The aim of this study was to evaluate end-user satisfaction with a web-based HRA with tailored feedback applied in worksite settings, using mixed (quantitative and qualitative) methods. Methods Employees of seven companies in the Netherlands participated in a commercial, web-based, HRA with tailored feedback. The HRA consisted of four components: 1) a health and lifestyle assessment questionnaire, 2) a biometric evaluation, 3) a laboratory evaluation, and 4) tailored feedback consisting of a personal health risk profile and lifestyle behavior advice communicated through a web portal. HRA respondents received an evaluation questionnaire after six weeks. Satisfaction with different parts of the HRA was measured on 5-point Likert scales. A free-text field provided the opportunity to make additional comments. Results In total, 2289 employees participated in the HRA program, of which 637 (27.8%) completed the evaluation questionnaire. Quantitative analysis showed that 85.6% of the respondents evaluated the overall HRA positively. The free-text field was filled in by 29.7 % of the respondents (189 out of 637), who made 315 separate remarks. Qualitative evaluation of these data showed that these respondents made critical remarks. Respondents felt restricted by the answer categories of the health and lifestyle assessment questionnaire, which resulted in the feeling that the corresponding feedback could be inadequate. Some respondents perceived the personal risk profile as unnecessarily alarming or suggested providing more explanations, reference values, and a justification of the behavioral advice given. Respondents also requested the opportunity to discuss the feedback with a health professional. Conclusions Most people were satisfied with the web-based HRA with tailored feedback. Sources of dissatisfaction were limited opportunities for providing additional health information outside of the predefined health and lifestyle assessment questionnaire and insufficient transparency on the generation of the feedback. Information regarding the aim and content of the HRA should be clear and accurate to prevent unrealistic expectations among end-users. Involving trusted health professionals in the implementation of web-based HRAs may enhance the use of and confidence in the HRA. PMID:23111097

Evaluation of end-user satisfaction among employees participating in a web-based health risk assessment with tailored feedback.

PubMed

Vosbergen, Sandra; Laan, Eva K; Colkesen, Ersen B; Niessen, Maurice A J; Kraaijenhagen, Roderik A; Essink-Bot, Marie-Louise; Peek, Niels

2012-10-30

Web technology is increasingly being used to provide individuals with health risk assessments (HRAs) with tailored feedback. End-user satisfaction is an important determinant of the potential impact of HRAs, as this influences program attrition and adherence to behavioral advice. The aim of this study was to evaluate end-user satisfaction with a web-based HRA with tailored feedback applied in worksite settings, using mixed (quantitative and qualitative) methods. Employees of seven companies in the Netherlands participated in a commercial, web-based, HRA with tailored feedback. The HRA consisted of four components: 1) a health and lifestyle assessment questionnaire, 2) a biometric evaluation, 3) a laboratory evaluation, and 4) tailored feedback consisting of a personal health risk profile and lifestyle behavior advice communicated through a web portal. HRA respondents received an evaluation questionnaire after six weeks. Satisfaction with different parts of the HRA was measured on 5-point Likert scales. A free-text field provided the opportunity to make additional comments. In total, 2289 employees participated in the HRA program, of which 637 (27.8%) completed the evaluation questionnaire. Quantitative analysis showed that 85.6% of the respondents evaluated the overall HRA positively. The free-text field was filled in by 29.7 % of the respondents (189 out of 637), who made 315 separate remarks. Qualitative evaluation of these data showed that these respondents made critical remarks. Respondents felt restricted by the answer categories of the health and lifestyle assessment questionnaire, which resulted in the feeling that the corresponding feedback could be inadequate. Some respondents perceived the personal risk profile as unnecessarily alarming or suggested providing more explanations, reference values, and a justification of the behavioral advice given. Respondents also requested the opportunity to discuss the feedback with a health professional. Most people were satisfied with the web-based HRA with tailored feedback. Sources of dissatisfaction were limited opportunities for providing additional health information outside of the predefined health and lifestyle assessment questionnaire and insufficient transparency on the generation of the feedback. Information regarding the aim and content of the HRA should be clear and accurate to prevent unrealistic expectations among end-users. Involving trusted health professionals in the implementation of web-based HRAs may enhance the use of and confidence in the HRA.

Differential Attention to Faces in Infant Siblings of Children with Autism Spectrum Disorder and Associations with Later Social and Language Ability.

PubMed

Wagner, Jennifer B; Luyster, Rhiannon J; Moustapha, Hana; Tager-Flusberg, Helen; Nelson, Charles A

2018-01-01

A growing body of literature has begun to explore social attention in infant siblings of children with autism spectrum disorder (ASD) with hopes of identifying early differences that are associated with later ASD or other aspects of development. The present study used eye-tracking to familiar (mother) and unfamiliar (stranger) faces in two groups of 6-month-old infants: infants with no family history of ASD (low-risk controls; LRC), and infants at high risk for ASD (HRA), by virtue of having an older sibling with ASD. HRA infants were further characterized based on autism classification at 24 months or older as HRA- (HRA without an ASD outcome) or HRA+ (HRA with an ASD outcome). For time scanning faces overall, HRA+ and LRC showed similar patterns of attention, and this was significantly greater than in HRA-. When examining duration of time spent on eyes and mouth, all infants spent more time on eyes than mouth, but HRA+ showed the greatest amount of time looking at these regions, followed by LRC, then HRA-. LRC showed a positive association between 6-month attention to eyes and 18-month social-communicative behavior, while HRA- showed a negative association between attention to eyes at 6 months and expressive language at 18 months (all correlations controlled for non-verbal IQ; HRA- correlations held with and without the inclusion of the small sample of HRA+). Differences found in face scanning at 6 months, as well as associations with social communication at 18 months, point to potential variation in the developmental significance of early social attention in children at low and high risk for ASD.

Prevalence of Metabolic Syndrome in an Employed Population as Determined by Analysis of Three Data Sources.

PubMed

Goetzel, Ron Z; Kent, Karen; Henke, Rachel Mosher; Pack, Cory; D'Arco, Malinda; Thomas, Jordana; Luckett, James; Arthur-Hartranft, Traci

2017-02-01

The aim of this study was to compare estimates of the prevalence and incidence of metabolic syndrome (MetS) using various data sources. We integrated health risk assessment (HRA), claims, and biometric screening data from Lockheed Martin Corporation. We measured the extent to which MetS risk factors measured using HRA and medical claims correlated with biometric screening data. Using biometric data, 24.9% of employees were identified as having MetS. Prevalence estimates were much lower using HRA data (6.8%) and claims (3.7%). Between 2012 and 2014, 10.4% of the sample newly acquired MetS. The number of MetS risk factors per employee was predictive of diabetes, heart disease, health care costs, and utilization. MetS is prevalent and associated with progression to disease. It is more easily tracked with biometric screening data than with HRA or claims data. Employers should consider efforts to manage and prevent this condition in their workforce.

Stress reaction process-based hierarchical recognition algorithm for continuous intrusion events in optical fiber prewarning system

NASA Astrophysics Data System (ADS)

Qu, Hongquan; Yuan, Shijiao; Wang, Yanping; Yang, Dan

2018-04-01

To improve the recognition performance of optical fiber prewarning system (OFPS), this study proposed a hierarchical recognition algorithm (HRA). Compared with traditional methods, which employ only a complex algorithm that includes multiple extracted features and complex classifiers to increase the recognition rate with a considerable decrease in recognition speed, HRA takes advantage of the continuity of intrusion events, thereby creating a staged recognition flow inspired by stress reaction. HRA is expected to achieve high-level recognition accuracy with less time consumption. First, this work analyzed the continuity of intrusion events and then presented the algorithm based on the mechanism of stress reaction. Finally, it verified the time consumption through theoretical analysis and experiments, and the recognition accuracy was obtained through experiments. Experiment results show that the processing speed of HRA is 3.3 times faster than that of a traditional complicated algorithm and has a similar recognition rate of 98%. The study is of great significance to fast intrusion event recognition in OFPS.

Human Reliability Assessments: Using the Past (Shuttle) to Predict the Future (Orion)

NASA Technical Reports Server (NTRS)

DeMott, Diana L.; Bigler, Mark A.

2017-01-01

NASA (National Aeronautics and Space Administration) Johnson Space Center (JSC) Safety and Mission Assurance (S&MA) uses two human reliability analysis (HRA) methodologies. The first is a simplified method which is based on how much time is available to complete the action, with consideration included for environmental and personal factors that could influence the human's reliability. This method is expected to provide a conservative value or placeholder as a preliminary estimate. This preliminary estimate or screening value is used to determine which placeholder needs a more detailed assessment. The second methodology is used to develop a more detailed human reliability assessment on the performance of critical human actions. This assessment needs to consider more than the time available, this would include factors such as: the importance of the action, the context, environmental factors, potential human stresses, previous experience, training, physical design interfaces, available procedures/checklists and internal human stresses. The more detailed assessment is expected to be more realistic than that based primarily on time available. When performing an HRA on a system or process that has an operational history, we have information specific to the task based on this history and experience. In the case of a Probabilistic Risk Assessment (PRA) that is based on a new design and has no operational history, providing a "reasonable" assessment of potential crew actions becomes more challenging. To determine what is expected of future operational parameters, the experience from individuals who had relevant experience and were familiar with the system and process previously implemented by NASA was used to provide the "best" available data. Personnel from Flight Operations, Flight Directors, Launch Test Directors, Control Room Console Operators, and Astronauts were all interviewed to provide a comprehensive picture of previous NASA operations. Verification of the assumptions and expectations expressed in the assessments will be needed when the procedures, flight rules, and operational requirements are developed and then finalized.

Human Reliability Assessments: Using the Past (Shuttle) to Predict the Future (Orion)

NASA Technical Reports Server (NTRS)

DeMott, Diana; Bigler, Mark

2016-01-01

NASA (National Aeronautics and Space Administration) Johnson Space Center (JSC) Safety and Mission Assurance (S&MA) uses two human reliability analysis (HRA) methodologies. The first is a simplified method which is based on how much time is available to complete the action, with consideration included for environmental and personal factors that could influence the human's reliability. This method is expected to provide a conservative value or placeholder as a preliminary estimate. This preliminary estimate or screening value is used to determine which placeholder needs a more detailed assessment. The second methodology is used to develop a more detailed human reliability assessment on the performance of critical human actions. This assessment needs to consider more than the time available, this would include factors such as: the importance of the action, the context, environmental factors, potential human stresses, previous experience, training, physical design interfaces, available procedures/checklists and internal human stresses. The more detailed assessment is expected to be more realistic than that based primarily on time available. When performing an HRA on a system or process that has an operational history, we have information specific to the task based on this history and experience. In the case of a Probabilistic Risk Assessment (PRA) that is based on a new design and has no operational history, providing a "reasonable" assessment of potential crew actions becomes more challenging. In order to determine what is expected of future operational parameters, the experience from individuals who had relevant experience and were familiar with the system and process previously implemented by NASA was used to provide the "best" available data. Personnel from Flight Operations, Flight Directors, Launch Test Directors, Control Room Console Operators and Astronauts were all interviewed to provide a comprehensive picture of previous NASA operations. Verification of the assumptions and expectations expressed in the assessments will be needed when the procedures, flight rules and operational requirements are developed and then finalized.

An assessment of health hazard/health risk appraisal.

PubMed Central

Wagner, E H; Beery, W L; Schoenbach, V J; Graham, R M

1982-01-01

A state-of-the-art review of a widely-used health promotion technique, the health hazard/health risk appraisal (HHA/HRA), was conducted. The review included preparing a 212-item annotated bibliography, compiling an inventory of 217 programs that have used HHA/HRA, holding discussions with HHA/HRA developers and users, conducting formal site visits to 15 HHA/HRA programs, and consultation with experts on epidemiology, biostatistics, and behavioral science as well as developers and users of HHA/HRA. Programs use HHA/HRA primarily as a promotional device, as a tool for structuring education about health-related behaviors, and as a motivational device for stimulating behavioral change. The scientific basis for HHA/HRA risk predictions is problematic, but their arithmetic imprecision is of less concern than insufficiency of the scientific evidence for certain behavioral recommendations, and inaccuracies in client-supplied data. Widely-held beliefs in HHA/HRA's efficacy for motivating behavioral change cannot be substantiated from available evidence, nor can the assumed absence of adverse effects. The importance of this particular health promotion technique appears to have been exaggerated. PMID:7065313

A Multi-Methods Approach to HRA and Human Performance Modeling: A Field Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacques Hugo; David I Gertman

2012-06-01

The Advanced Test Reactor (ATR) is a research reactor at the Idaho National Laboratory is primarily designed and used to test materials to be used in other, larger-scale and prototype reactors. The reactor offers various specialized systems and allows certain experiments to be run at their own temperature and pressure. The ATR Canal temporarily stores completed experiments and used fuel. It also has facilities to conduct underwater operations such as experiment examination or removal. In reviewing the ATR safety basis, a number of concerns were identified involving the ATR canal. A brief study identified ergonomic issues involving the manual handlingmore » of fuel elements in the canal that may increase the probability of human error and possible unwanted acute physical outcomes to the operator. In response to this concern, that refined the previous HRA scoping analysis by determining the probability of the inadvertent exposure of a fuel element to the air during fuel movement and inspection was conducted. The HRA analysis employed the SPAR-H method and was supplemented by information gained from a detailed analysis of the fuel inspection and transfer tasks. This latter analysis included ergonomics, work cycles, task duration, and workload imposed by tool and workplace characteristics, personal protective clothing, and operational practices that have the potential to increase physical and mental workload. Part of this analysis consisted of NASA-TLX analyses, combined with operational sequence analysis, computational human performance analysis (CHPA), and 3D graphical modeling to determine task failures and precursors to such failures that have safety implications. Experience in applying multiple analysis techniques in support of HRA methods is discussed.« less

Similarities and differences in philanthropic and federal support for medical research in the United States: an analysis of funding by nonprofits in 2006-2008.

PubMed

Myers, Elizabeth R; Alciati, Marianne H; Ahlport, Kathryn N; Sung, Nancy S

2012-11-01

The medical community currently has no detailed source of information on philanthropic research funding. The authors sought to identify trends in research funding by members of the Health Research Alliance (HRA), a consortium of nonprofit funders of biomedical research, and compare findings with research support from the federal government. Thirty-two HRA members uploaded information about grants with start dates in 2006, 2007, and 2008. Data were collected about each grant, investigator, and recipient institution. Disease categorization codes were assigned by a computer process similar to that used by the National Institutes of Health (NIH). In the three years under study, HRA members awarded 9,934 grants, totaling $2,712,418,254 in research and training support. Grant funding increased by 26% between 2006 and 2008. In contrast, NIH research spending increased by only 3% over the same time. Fifty-six percent of HRA grant dollars supported research projects, whereas 30% supported career development and training. During the same period, more than two-thirds of NIH grant dollars supported research projects, although NIH invested proportionally less in career development and training (7%). The largest proportion of HRA grant dollars addressed cancer, followed by diabetes and genetics. Sixty-three percent of HRA-supported investigators were men and 36% were women; 66% of investigators were white, 32% Asian, and fewer than 2% black. These results indicate that nonprofit organizations play an important role in developing careers and advancing research in significant disease areas such as cancer and diabetes, and in basic science areas such as genetics.

HRA Aerospace Challenges

NASA Technical Reports Server (NTRS)

DeMott, Diana

2013-01-01

Compared to equipment designed to perform the same function over and over, humans are just not as reliable. Computers and machines perform the same action in the same way repeatedly getting the same result, unless equipment fails or a human interferes. Humans who are supposed to perform the same actions repeatedly often perform them incorrectly due to a variety of issues including: stress, fatigue, illness, lack of training, distraction, acting at the wrong time, not acting when they should, not following procedures, misinterpreting information or inattention to detail. Why not use robots and automatic controls exclusively if human error is so common? In an emergency or off normal situation that the computer, robotic element, or automatic control system is not designed to respond to, the result is failure unless a human can intervene. The human in the loop may be more likely to cause an error, but is also more likely to catch the error and correct it. When it comes to unexpected situations, or performing multiple tasks outside the defined mission parameters, humans are the only viable alternative. Human Reliability Assessments (HRA) identifies ways to improve human performance and reliability and can lead to improvements in systems designed to interact with humans. Understanding the context of the situation that can lead to human errors, which include taking the wrong action, no action or making bad decisions provides additional information to mitigate risks. With improved human reliability comes reduced risk for the overall operation or project.

Efficacy of Cladribine Tablets in high disease activity subgroups of patients with relapsing multiple sclerosis: A post hoc analysis of the CLARITY study.

PubMed

Giovannoni, Gavin; Soelberg Sorensen, Per; Cook, Stuart; Rammohan, Kottil W; Rieckmann, Peter; Comi, Giancarlo; Dangond, Fernando; Hicking, Christine; Vermersch, Patrick

2018-04-01

In the CLARITY (CLAdRIbine Tablets treating multiple sclerosis orallY) study, Cladribine Tablets significantly improved clinical and magnetic resonance imaging (MRI) outcomes (vs placebo) in patients with relapsing-remitting multiple sclerosis. Describe two clinically relevant definitions for patients with high disease activity (HDA) at baseline of the CLARITY study (utility verified in patients receiving placebo) and assess the treatment effects of Cladribine Tablets 3.5 mg/kg compared with the overall study population. Outcomes of patients randomised to Cladribine Tablets 3.5 mg/kg or placebo were analysed for subgroups using HDA definitions based on high relapse activity (HRA; patients with ⩾2 relapses during the year prior to study entry, whether on DMD treatment or not) or HRA plus disease activity on treatment (HRA + DAT; patients with ⩾2 relapses during the year prior to study entry, whether on DMD treatment or not, PLUS patients with ⩾1 relapse during the year prior to study entry while on therapy with other DMDs and ⩾1 T1 Gd+ or ⩾9 T2 lesions). In the overall population, Cladribine Tablets 3.5 mg/kg reduced the risk of 6-month-confirmed Expanded Disability Status Scale (EDSS) worsening by 47% vs placebo. A risk reduction of 82% vs placebo was seen in both the HRA and HRA + DAT subgroups (vs 19% for non-HRA and 18% for non-HRA + DAT), indicating greater responsiveness to Cladribine Tablets 3.5 mg/kg in patients with HDA. There were consistent results for other efficacy endpoints. The safety profile in HDA patients was consistent with the overall CLARITY population. Patients with HDA showed clinical and MRI responses to Cladribine Tablets 3.5 mg/kg that were generally better than, or at least comparable with, the outcomes seen in the overall CLARITY population.

The U.S. Army’s Health Risk Appraisal (HRA) Survey, Part I, History, Reliability, and Validity

DTIC Science & Technology

2003-08-01

reports as a clinical decision-making rule in deciding whether or not to administer the screening test. Second, accuracy of patient self-reports may...10): 1665-1669, 1997. 6. Baker, F., S. R. Ainsworth, J. T. Dye, C. Crammer , M. J. Thun, D. Hoffmann, J. L. Repace, J. E. Henningfield, J. Slade, J

Demonstration of community pharmacy and managed care organization collaboration on cardiovascular disease risk factor identification using health risk appraisal.

PubMed

Dettloff, Rick W; Morse, Jacqueline A

2009-01-01

To integrate the resources from a local statewide managed care organization (MCO) and a supermarket pharmacy chain to conduct a comprehensive health risk appraisal (HRA). Collected data were used to assess cardiovascular risk factors and identify disease management opportunities. An analysis to determine the prevalence of risk factors was conducted on a cross-sectional HRA survey. The HRA involved point-of-care cholesterol screening (with a follow-up risk factor questionnaire) conducted by pharmacist employees of the employer group (a regional supermarket chain). Those eligible for the screening were employees of the supermarket chain and their dependents covered by the participating MCO. A total of 12,915 completed HRA questionnaires were received. The mean age of the employees participating was approximately 44 years. Of note, 14%, 24%, 21%, and 69% of questionnaires had abnormal values for total cholesterol, high-density lipoprotein (HDL) cholesterol, blood pressure, and body mass index (BMI), respectively. Compared with national benchmarks, low HDL cholesterol and BMI more than 30 kg/m2 were more common in this cohort. More than one-fourth of the employees in this analysis were identified as being at high risk for a coronary heart disease event. The unique collaboration presented here allowed for an expanded role of pharmacists to implement a quality improvement program. In response, the employer decided to continue the HRA screening and offer a employee contribution reduction-based health incentive to covered members. The employer also is considering offering cardiovascular disease management interventions that will be performed by the supermarket chain's pharmacists and targeted toward the identified risk factor trends.

Health-risk appraisal with or without disease management for worksite cardiovascular risk reduction.

PubMed

Maron, David J; Forbes, Barbara L; Groves, Jay R; Dietrich, Mary S; Sells, Patrick; DiGenio, Andres G

2008-01-01

Worksite health promotion programs use health risk appraisal (HRA) surveys to identify employees at increased risk, then provide a range of interventions to encourage high-risk individuals to improve their health. Our objective was to determine how the intensity of intervention after HRA affected cardiovascular risk after 1 year, comparing individual follow-up counseling with environmental supports. 133 employees of Vanderbilt University with cardiovascular risk factors were randomly assigned to worksite HRA plus targeted disease management (DM group) or HRA plus information about worksite health promotion programs (HRA group). The DM group received longitudinal individualized counseling for risk reduction, whereas the HRA group members received one feedback session about their risk factors and information about free worksite health promotion programs. The main outcome measure was the difference between groups in the change in average Framingham risk score from baseline to 1 year. There was no significant baseline difference between groups in the Framingham risk score. Among DM participants, the mean (SD) Framingham risk score decreased by 22.6%; among HRA participants, the mean score rose by 4.3% (P = .017 for the difference between groups). In this study of employees with cardiovascular risk factors, HRA followed by individual counseling was more effective than providing information about free worksite health promotion programs.

Behavioral science perspectives on health hazard/health risk appraisal.

PubMed Central

Becker, M H; Janz, N K

1987-01-01

Health-promotion efforts often employ HRA as a device for providing an individual with quantitative information about the consequences of personal health-related behaviors and as an attempt to motivate the client to adopt recommendations directed at establishing a healthier lifestyle. From a behavioral science perspective, the HRA approach and process contain elements that (at least in retrospective analysis) appear to be founded in relevant bodies of theory. First, HRA seems to be a reasonably efficient mechanism for transmitting information relative to associations between personal health behaviors and mortality risks. Moreover, while general knowledge and advice about the untoward consequences of risk factors (such as smoking, obesity, high blood pressure, etc.) are currently widespread, HRA provides new and specific information: the client's own relative risks. Some individuals who voluntarily participate in HRA bring to the experience an already high level of readiness to take action; for them, the technique may constitute the final necessary stimulus or "cue to action" [12]. Referring to a "borrowing from the future" phenomenon, Green points out that "some educational efforts are really only triggers to behavior that would have changed eventually anyway" [44, p. 159]. Thus, where motivation is sufficiently high, receipt of HRA feedback information may by itself be capable of inducing behavior change. Second, the focus on awareness and personalization of mortality risk fits well with most theoretical formulations concerning attitudes and beliefs involved in health-related decision making. Although the emphasis on mortality and often distant negative outcomes is problematic, increasing the client's perception of personal vulnerability is a psychologically defensible approach, and fear arousal can generate attitude change (although questions of appropriate level, duration of effects obtained, acceptability, etc. still need to be resolved). Third, HRA might be expected to enhance the client's perception of the benefits associated with lifestyle modifications and may even increase personal belief in his or her ability to undertake such changes in behavior. However, in light of the fact that the behaviors to be altered are complex, usually well-established and repetitive, and require different skills to extinguish, the provision of typical HRA feedback should not (on a theoretical basis) ordinarily be expected to accomplish much beyond information transmission, belief or attitude change, and the induction of some level of motivation.(ABSTRACT TRUNCATED AT 400 WORDS) PMID:3679842

Doing battle with "the monster:" how high-risk heterosexuals experience and successfully manage HIV stigma as a barrier to HIV testing.

PubMed

Gwadz, Marya; Leonard, Noelle R; Honig, Sylvie; Freeman, Robert; Kutnick, Alexandra; Ritchie, Amanda S

2018-04-20

Annual HIV testing is recommended for populations at-risk for HIV in the United States, including heterosexuals geographically connected to urban high-risk areas (HRA) with elevated rates of HIV prevalence and poverty, who are primarily African American/Black or Hispanic. Yet this subpopulation of "individuals residing in HRA" (IR-HRA) evidence low rates of regular HIV testing. HIV stigma is a recognized primary barrier to testing, in part due to its interaction with other stigmatized social identities. Guided by social-cognitive and intersectionality theories, this qualitative descriptive study explored stigma as a barrier to HIV testing and identified ways IR-HRA manage stigma. In 2012-2014, we conducted in-depth qualitative interviews with 31 adult IR-HRA (74% male, 84% African American/Black) with unknown or negative HIV status, purposively sampled from a larger study for maximum variation on HIV testing experiences. Interviews were audio-recorded and professionally transcribed verbatim. Data were analyzed using a systematic content analysis approach that was both theory-driven and inductive. Stigma was a primary barrier to HIV testing among IR-HRA. In the context of an under-resourced community, HIV stigma was experienced as emerging from, and being perpetuated by, health care organizations and educational institutions, as well as community members. Participants noted it was "better not to know" one's HIV status, to avoid experiencing HIV-related stigma, which could interact with other stigmatized social identities and threaten vital social relationships, life chances, and resources. Yet most had tested for HIV previously. Factors facilitating testing included health education to boost knowledge of effective treatments for HIV; understanding HIV does not necessitate ending social relationships; and tapping into altruism. In the context of economic and social inequality, HIV stigma operates on multiple, intersecting layers. IR-HRA struggle with an aversion to HIV testing, because adopting another stigmatized status is dangerous. They also find ways to manage stigma to engage in testing, even if not at recommended levels. Findings highlight strategies to reduce HIV stigma at the levels of communities, institutions, and individuals to improve rates of annual HIV testing necessary to eliminate HIV transmission and reduce HIV-related racial and ethnic health disparities among IR-HRA.

Comparison of the Utility of Two Assessments for Explaining and Predicting Productivity Change: Well-Being Versus an HRA.

PubMed

Gandy, William M; Coberley, Carter; Pope, James E; Rula, Elizabeth Y

2016-01-01

To compare utility of employee well-being to health risk assessment (HRA) as predictors of productivity change. Panel data from 2189 employees who completed surveys 2 years apart were used in hierarchical models comparing the influence of well-being and health risk on longitudinal changes in presenteeism and job performance. Absenteeism change was evaluated in a nonexempt subsample. Change in well-being was the most significant independent predictor of productivity change across all three measures. Comparing hierarchical models, well-being models performed significantly better than HRA models. The HRA added no incremental explanatory power over well-being in combined models. Alone, nonphysical health well-being components outperformed the HRA for all productivity measures. Well-being offers a more comprehensive measure of factors that influence productivity and can be considered preferential to HRA in understanding and addressing suboptimal productivity.

The role of incentive design, incentive value, communications strategy, and worksite culture on health risk assessment participation.

PubMed

Seaverson, Erin L D; Grossmeier, Jessica; Miller, Toni M; Anderson, David R

2009-01-01

To examine the impact of financial incentives, communications strategy, and worksite culture on health risk assessment (HRA) participation rates. A cross-sectional study design was used to examine factors that influence employee participation, including incentive value, incentive design, communications strategy, and worksite culture. Large private-sector and public-sector employers. Thirty-six employers (n = 559,988 employees) that provided financial incentives to promote employee HRA participation. Organizations implemented the HRA as part of a more comprehensive worksite health promotion strategy that included follow-up interventions and a variety of other components. The primary outcome of interest was employee HRA participation. Information on program design and structure, as well as on HRA eligibility and participation, was collected for each organization via standard client report and semistructured interviews with account managers. General linear regression models were used to examine the extent to which factors influence HRA participation independently and when controlled for other factors. Incentive value (r2 = .433; p < .000), benefits-integrated incentive design (r2 = .184; p = .009), culture (r2 = .113; p = .045), and communications strategy (r = .300; p = .001) had positive bivariate associations with HRA participation rates. When all factors were included in the model, incentive value (p = .001) and communications strategy (p = .023) were significantly associated with HRA participation. Variance accounted for by all factors combined was R12 = .584. This study suggests that incentive value, incentive type, supportive worksite culture, and comprehensive communications strategy may all play a role in increasing HRA participation.

The impact of two workplace-based health risk appraisal interventions on employee lifestyle parameters, mental health and work ability: results of a randomized controlled trial.

PubMed

Addley, K; Boyd, S; Kerr, R; McQuillan, P; Houdmont, J; McCrory, M

2014-04-01

Health risk appraisals (HRA) are a common type of workplace health promotion programme offered by American employers. In the United Kingdom, evidence of their effectiveness for promoting health behaviour change remains inconclusive. This randomized controlled trial examined the effects of two HRA interventions on lifestyle parameters, mental health and work ability in a UK context. A total of 180 employees were randomized into one of three groups: Group A (HRA augmented with health promotion and education activities), Group B (HRA only) and Group C (control, no intervention). After 12 months, changes in mean scoring in 10 lifestyle, mental health and work ability indices were compared, Groups A and B demonstrated non-significant improvements in 70% and 80%, respectively, compared with controls (40%). Odds ratios revealed that, compared with the control group, Group A was 29.2 (95% CI: 9.22-92.27) times more likely to report a perceived change in lifestyle behaviour; Group B 4.4 times (95% CI: 1.65-11.44). In conclusion, participation in the HRA was associated with a higher likelihood of perceived lifestyle behaviour change which was further increased in the augmented HRA group, thereby providing preliminary evidence that HRA and augmented HRA in particular may help UK employees make positive healthy lifestyle changes.

One Size Does Not Fit All: Human Failure Event Decomposition and Task Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronald Laurids Boring, PhD

2014-09-01

In the probabilistic safety assessments (PSAs) used in the nuclear industry, human failure events (HFEs) are determined as a subset of hardware failures, namely those hardware failures that could be triggered or exacerbated by human action or inaction. This approach is top-down, starting with hardware faults and deducing human contributions to those faults. Elsewhere, more traditionally human factors driven approaches would tend to look at opportunities for human errors first in a task analysis and then identify which of those errors is risk significant. The intersection of top-down and bottom-up approaches to defining HFEs has not been carefully studied. Ideally,more » both approaches should arrive at the same set of HFEs. This question remains central as human reliability analysis (HRA) methods are generalized to new domains like oil and gas. The HFEs used in nuclear PSAs tend to be top-down—defined as a subset of the PSA—whereas the HFEs used in petroleum quantitative risk assessments (QRAs) are more likely to be bottom-up—derived from a task analysis conducted by human factors experts. The marriage of these approaches is necessary in order to ensure that HRA methods developed for top-down HFEs are also sufficient for bottom-up applications. In this paper, I first review top-down and bottom-up approaches for defining HFEs and then present a seven-step guideline to ensure a task analysis completed as part of human error identification decomposes to a level suitable for use as HFEs. This guideline illustrates an effective way to bridge the bottom-up approach with top-down requirements.« less

Head repositioning accuracy to neutral: a comparative study of error calculation.

PubMed

Hill, Robert; Jensen, Pål; Baardsen, Tor; Kulvik, Kristian; Jull, Gwendolen; Treleaven, Julia

2009-02-01

Deficits in cervical proprioception have been identified in subjects with neck pain through the measure of head repositioning accuracy (HRA). Nevertheless there appears to be no general consensus regarding the construct of measurement of error used for calculating HRA. This study investigated four different mathematical methods of measurement of error to determine if there were any differences in their ability to discriminate between a control group and subjects with a whiplash associated disorder. The four methods for measuring cervical joint position error were calculated using a previous data set consisting of 50 subjects with whiplash complaining of dizziness (WAD D), 50 subjects with whiplash not complaining of dizziness (WAD ND) and 50 control subjects. The results indicated that no one measure of HRA uniquely detected or defined the differences between the whiplash and control groups. Constant error (CE) was significantly different between the whiplash and control groups from extension (p<0.05). Absolute errors (AEs) and root mean square errors (RMSEs) demonstrated differences between the two WAD groups in rotation trials (p<0.05). No differences were seen with variable error (VE). The results suggest that a combination of AE (or RMSE) and CE are probably the most suitable measures for analysis of HRA.

The impact of alternative incentive schemes on completion of health risk assessments.

PubMed

Haisley, Emily; Volpp, Kevin G; Pellathy, Thomas; Loewenstein, George

2012-01-01

The biggest challenge for corporate wellness initiatives is low rates of employee participation. We test whether a behavioral economic approach to incentive design (i.e., a lottery) is more effective than a direct economic payment of equivalent monetary value (i.e., a grocery gift certificate) in encouraging employees to complete health risk assessments (HRAs). Employees were assigned to one of three arms. Assignment to a treatment arm versus the nontreatment arm was determined by management. Assignment to an arm among those eligible for treatment was randomized by office. A large health care management and information technology consulting company. A total of 1299 employees across 14 offices participated. All employees were eligible to receive $25 for completing the HRA. Those in the lottery condition were assigned to teams of four to eight people and, conditional on HRA completion, were entered into a lottery with a prize of $100 (expected value, $25) and a bonus value of an additional $25 if 80% of team members participated. Those in the grocery gift certificate condition who completed an HRA received a $25 grocery gift certificate. Those in the comparison condition received no additional incentive. HRA completion rates. Logistic regression analysis. HRA completion rates were significantly higher among participations in the lottery incentive condition (64%) than in both the grocery gift certificate condition (44%) and the comparison condition (40%). Effects were larger for lower-income employees, as indicated by a significant interaction between income and the lottery incentive. Lottery incentives that incorporate regret aversion and social pressure can provide higher impact for the same amount of money as simple economic incentives.

Value of laboratory tests in employer-sponsored health risk assessments for newly identifying health conditions: analysis of 52,270 participants.

PubMed

Kaufman, Harvey W; Williams, Fred R; Odeh, Mouneer A

2011-01-01

Employer-sponsored health risk assessments (HRA) may include laboratory tests to provide evidence of disease and disease risks for common medical conditions. We evaluated the ability of HRA-laboratory testing to provide new disease-risk information to participants. We performed a cross-sectional analysis of HRA-laboratory results for participating adult employees and their eligible spouses or their domestic partners, focusing on three common health conditions: hyperlipidemia, diabetes mellitus, and chronic kidney disease. HRA with laboratory results of 52,270 first-time participants were analyzed. Nearly all participants had access to health insurance coverage. Twenty-four percent (12,392) self-reported one or more of these medical conditions: 21.1% (11,017) self-identified as having hyperlipidemia, 4.7% (2,479) self-identified as having diabetes, and 0.7% (352) self-identified as having chronic kidney disease. Overall, 36% (n = 18,540) of participants had laboratory evidence of at least one medical condition newly identified: 30.7% (16,032) had laboratory evidence of hyperlipidemia identified, 1.9% (984) had laboratory evidence of diabetes identified, and 5.5% (2,866) had laboratory evidence of chronic kidney disease identified. Of all participants with evidence of hyperlipidemia 59% (16,030 of 27,047), were newly identified through the HRA. Among those with evidence of diabetes 28% (984 of 3,463) were newly identified. The highest rate of newly identified disease risk was for chronic kidney disease: 89% (2,866 of 3,218) of participants with evidence of this condition had not self-reported it. Men (39%) were more likely than women (33%) to have at least one newly identified condition (p<0.0001). Among men, lower levels of educational achievement were associated with modestly higher rates of newly identified disease risk (p<0.0001); the association with educational achievement among women was unclear. Even among the youngest age range (20 to 29 year olds), nearly 1 in 4 participants (24%) had a newly identified risk for disease. These results support the important role of employer-sponsored laboratory testing as an integral element of HRA for identifying evidence of previously undiagnosed common medical conditions in individuals of all working age ranges, regardless of educational level and gender.

40 CFR 174.533 - Glycine max Herbicide-Resistant Acetolactate Synthase (GM-HRA) inert ingredient; exemption from...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Glycine max Herbicide-Resistant... Glycine max Herbicide-Resistant Acetolactate Synthase (GM-HRA) inert ingredient; exemption from the requirement of a tolerance. Residues of Glycine max herbicide-resistant acetolactate synthase (GM-HRA) enzyme...

40 CFR 174.533 - Glycine max Herbicide-Resistant Acetolactate Synthase (GM-HRA) inert ingredient; exemption from...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Glycine max Herbicide-Resistant... Glycine max Herbicide-Resistant Acetolactate Synthase (GM-HRA) inert ingredient; exemption from the requirement of a tolerance. Residues of Glycine max herbicide-resistant acetolactate synthase (GM-HRA) enzyme...

What is needed to implement a computer-assisted health risk assessment tool? An exploratory concept mapping study.

PubMed

Ahmad, Farah; Norman, Cameron; O'Campo, Patricia

2012-12-19

Emerging eHealth tools could facilitate the delivery of comprehensive care in time-constrained clinical settings. One such tool is interactive computer-assisted health-risk assessments (HRA), which may improve provider-patient communication at the point of care, particularly for psychosocial health concerns, which remain under-detected in clinical encounters. The research team explored the perspectives of healthcare providers representing a variety of disciplines (physicians, nurses, social workers, allied staff) regarding the factors required for implementation of an interactive HRA on psychosocial health. The research team employed a semi-qualitative participatory method known as Concept Mapping, which involved three distinct phases. First, in face-to-face and online brainstorming sessions, participants responded to an open-ended central question: "What factors should be in place within your clinical setting to support an effective computer-assisted screening tool for psychosocial risks?" The brainstormed items were consolidated by the research team. Then, in face-to-face and online sorting sessions, participants grouped the items thematically as 'it made sense to them'. Participants also rated each item on a 5-point scale for its 'importance' and 'action feasibility' over the ensuing six month period. The sorted and rated data was analyzed using multidimensional scaling and hierarchical cluster analyses which produced visual maps. In the third and final phase, the face-to-face Interpretation sessions, the concept maps were discussed and illuminated by participants collectively. Overall, 54 providers participated (emergency care 48%; primary care 52%). Participants brainstormed 196 items thought to be necessary for the implementation of an interactive HRA emphasizing psychosocial health. These were consolidated by the research team into 85 items. After sorting and rating, cluster analysis revealed a concept map with a seven-cluster solution: 1) the HRA's equitable availability; 2) the HRA's ease of use and appropriateness; 3) the content of the HRA survey; 4) patient confidentiality and choice; 5) patient comfort through humanistic touch; 6) professional development, care and workload; and 7) clinical management protocol. Drawing insight from the theoretical lens of Sociotechnical theory, the seven clusters of factors required for HRA implementation could be read as belonging to three overarching aspects : Technical (cluster 1, 2 and 3), Social-Patient (cluster 4 and 5), and Social-Provider (cluster 6 and 7). Participants rated every one of the clusters as important, with mean scores from 4.0 to 4.5. Their scores for feasibility were somewhat lower, ranging from 3.4 to. 4.3. Comparing the scores for importance and feasibility, a significant difference was found for one cluster from each region (cluster 2, 5, 6). The cluster on professional development, care and workload was perceived as especially challenging in emergency department settings, and possible reasons were discussed in the interpretation sessions. A number of intertwined multilevel factors emerged as important for the implementation of a computer-assisted, interactive HRA with a focus on psychosocial health. Future developments in this area could benefit from systems thinking and insights from theoretical perspectives, such as sociotechnical system theory for joint optimization and responsible autonomy, with emphasis on both the technical and social aspects of HRA implementation.

Marker-based or model-based RSA for evaluation of hip resurfacing arthroplasty? A clinical validation and 5-year follow-up.

PubMed

Lorenzen, Nina Dyrberg; Stilling, Maiken; Jakobsen, Stig Storgaard; Gustafson, Klas; Søballe, Kjeld; Baad-Hansen, Thomas

2013-11-01

The stability of implants is vital to ensure a long-term survival. RSA determines micro-motions of implants as a predictor of early implant failure. RSA can be performed as a marker- or model-based analysis. So far, CAD and RE model-based RSA have not been validated for use in hip resurfacing arthroplasty (HRA). A phantom study determined the precision of marker-based and CAD and RE model-based RSA on a HRA implant. In a clinical study, 19 patients were followed with stereoradiographs until 5 years after surgery. Analysis of double-examination migration results determined the clinical precision of marker-based and CAD model-based RSA, and at the 5-year follow-up, results of the total translation (TT) and the total rotation (TR) for marker- and CAD model-based RSA were compared. The phantom study showed that comparison of the precision (SDdiff) in marker-based RSA analysis was more precise than model-based RSA analysis in TT (p CAD < 0.001; p RE = 0.04) and TR (p CAD = 0.01; p RE < 0.001). The clinical precision (double examination in 8 patients) comparing the precision SDdiff was better evaluating the TT using the marker-based RSA analysis (p = 0.002), but showed no difference between the marker- and CAD model-based RSA analysis regarding the TR (p = 0.91). Comparing the mean signed values regarding the TT and the TR at the 5-year follow-up in 13 patients, the TT was lower (p = 0.03) and the TR higher (p = 0.04) in the marker-based RSA compared to CAD model-based RSA. The precision of marker-based RSA was significantly better than model-based RSA. However, problems with occluded markers lead to exclusion of many patients which was not a problem with model-based RSA. HRA were stable at the 5-year follow-up. The detection limit was 0.2 mm TT and 1° TR for marker-based and 0.5 mm TT and 1° TR for CAD model-based RSA for HRA.

Novel Method for Recruiting Representative At-Risk Individuals into Cancer Prevention Trials: Online Health Risk Assessment in Employee Wellness Programs.

PubMed

Hui, Siu-Kuen Azor; Miller, Suzanne M; Hazuda, Leah; Engelman, Kimberly; Ellerbeck, Edward F

2016-09-01

Participation in cancer prevention trials (CPT) is lower than 3 % among high-risk healthy individuals, and racial/ethnic minorities are the most under-represented. Novel recruitment strategies are therefore needed. Online health risk assessment (HRA) serves as a gateway component of nearly all employee wellness programs (EWPs) and may be a missed opportunity. This study aimed to explore employees' interest, willingness, motivators, and barriers of releasing their HRA responses to an external secure research database for recruitment purpose. We used qualitative research methods (focus group and individual interviews) to examine employees' interest and willingness in releasing their online HRA responses to an external, secure database to register as potential CPT participants. Fifteen structured interviews (40 % of study participants were of racial/ethnic minority) were conducted, and responses reached saturation after four interviews. All employees showed interest and willingness to release their online HRA responses to register as a potential CPT participant. Content analyses revealed that 91 % of participants were motivated to do so, and the major motivators were to (1) obtain help in finding personally relevant prevention trials, (2) help people they know who are affected by cancer, and/or (3) increase knowledge about CPT. A subset of participants (45 %) expressed barriers of releasing their HRA responses due to concerns about credibility and security of the external database. Online HRA may be a feasible but underutilized recruitment method for cancer prevention trials. EWP-sponsored HRA shows promise for the development of a large, centralized registry of racially/ethnically representative CPT potential participants.

Novel method for recruiting representative at-risk individuals into cancer prevention trials: on-line health risk assessment in employee wellness programs

PubMed Central

Hui, Siu-kuen Azor; Miller, Suzanne M.; Hazuda, Leah; Engelman, Kimberly; Ellerbeck, Edward F.

2015-01-01

Participation in cancer prevention trials (CPT) is lower than 3% among high-risk healthy individuals, and racial/ethnic minorities are the most under-represented. Novel recruitment strategies are therefore needed. On-line health risk assessment (HRA) serves as a gateway component of nearly all employee wellness programs (EWP) and may be a missed opportunity. This study aimed to explore employees’ interest, willingness, motivators, and barriers of releasing their HRA responses to an external secure research database for recruitment purpose. We used qualitative research methods (focus group and individual interviews) to examine employees’ interest and willingness in releasing their on-line HRA responses to an external, secure database to register as potential CPT participants. Fifteen structured interviews (40% of study participants were of racial/ethnic minority) were conducted and responses reached saturation after four interviews. All employees showed interest and willingness to release their on-line HRA responses to register as a potential CPT participant. Content analyses revealed that 91% of participants were motivated to do so, and the major motivators were to: 1) obtain help in finding personally relevant prevention trials, 2) help people they know who are affected by cancer, and/or 3) increase knowledge about CPT. A subset of participants (45%) expressed barriers of releasing their HRA responses due to concerns about credibility and security of the external database. On-line HRA may be a feasible but underutilized recruitment method for cancer prevention trials. EWP-sponsored HRA shows promise for the development of a large, centralized registry of racially/ethnically representative CPT potential participants. PMID:26507744

Human Reliability Assessments: Using the Past (Shuttle) to Predict the Future (ORION)

NASA Technical Reports Server (NTRS)

Mott, Diana L.; Bigler, Mark A.

2017-01-01

NASA uses two HRA assessment methodologies. The first is a simplified method which is based on how much time is available to complete the action, with consideration included for environmental and personal factors that could influence the human's reliability. This method is expected to provide a conservative value or placeholder as a preliminary estimate. This preliminary estimate is used to determine which placeholder needs a more detailed assessment. The second methodology is used to develop a more detailed human reliability assessment on the performance of critical human actions. This assessment needs to consider more than the time available, this would include factors such as: the importance of the action, the context, environmental factors, potential human stresses, previous experience, training, physical design interfaces, available procedures/checklists and internal human stresses. The more detailed assessment is still expected to be more realistic than that based primarily on time available. When performing an HRA on a system or process that has an operational history, we have information specific to the task based on this history and experience. In the case of a PRA model that is based on a new design and has no operational history, providing a "reasonable" assessment of potential crew actions becomes more problematic. In order to determine what is expected of future operational parameters, the experience from individuals who had relevant experience and were familiar with the system and process previously implemented by NASA was used to provide the "best" available data. Personnel from Flight Operations, Flight Directors, Launch Test Directors, Control Room Console Operators and Astronauts were all interviewed to provide a comprehensive picture of previous NASA operations. Verification of the assumptions and expectations expressed in the assessments will be needed when the procedures, flight rules and operational requirements are developed and then finalized.

Indications for MARS-MRI in Patients Treated With Metal-on-Metal Hip Resurfacing Arthroplasty.

PubMed

Connelly, James W; Galea, Vincent P; Matuszak, Sean J; Madanat, Rami; Muratoglu, Orhun; Malchau, Henrik

2018-06-01

Currently, there are no universally accepted guidelines on when to obtain metal artifact reduction sequence magnetic resonance imaging (MARS-MRI) in metal-on-metal (MoM) hip resurfacing arthroplasty (HRA) patients. Our primary aims were to identify which patient and clinical factors are predictive of adverse local tissue reaction (ALTR) and create an algorithm for indicating MARS-MRI in patients with Articular Surface Replacement (ASR) HRA. The secondary aim was to compare our algorithm to existing guidelines on when to perform MARS-MRI in MoM HRA patients. The study cohort consisted of 182 patients with unilateral ASR HRA from a prospective, multicenter study. Subjects received MARS-MRI at a mean of 7.8 years from surgery, regardless of symptoms. We determined which variables were predictive of ALTR and generated cutoffs for each variable. Finally, we created an algorithm to predict ALTR and indicate MARS-MRI in ASR HRA patients using these cutoffs and compared it to existing guidelines. We found high blood cobalt (Co) (odds ratio = 1.070; P = .011) and high blood chromium (Cr) (odds ratio = 1.162; P = .002) to be significant predictors of ALTR presence. Our algorithm using a blood Co cutoff of 1.15 ppb and a Cr cutoff of 1.09 ppb achieved 96.6% sensitivity and 35.3% specificity in predicting ALTR, which outperformed the existing guidelines. Blood Co and Cr levels are predictive of ALTR in ASR HRA patients. Our algorithm considering blood Co and Cr levels predicts ALTR in ASR HRA patients with higher sensitivity than previously established guidelines. Copyright © 2018 Elsevier Inc. All rights reserved.

SUPPLEMENTARY COMPARISON: Final report of the bilateral comparison APMP.M.H-S2 of hardness measurement for Rockwell scales A and B between PTB and NIMT

NASA Astrophysics Data System (ADS)

Sanponpute, Tassanai; Meesaplak, Apichaya; Herrmann, Konrad; Menelao, Febo

2009-01-01

The bilateral comparison APMP.M.H-S2 of hardness measurement for Rockwell scales A and B was arranged by the National Institute of Metrology of Thailand, NIMT, as the pilot laboratory, comparing with Physikalisch-Technische Bundesanstalt of Germany, PTB. The objective of this comparison was to confirm the calibration and measurement capabilities of NIMT in hardness measurement. The period of measurement covered March to August 2009. There were two sets of artefacts: scale A artefact set and scale B artefact set. The scale A artefact set consisted of seven hardness blocks: 35 HRA, 40 HRA, 55 HRA, 60 HRA, 70 HRA, 80 HRA, 85 HRA. The artefact set for scale B consisted of nine hardness blocks: 25 HRB, 30 HRB, 40 HRB, 50 HRB, 60 HRB, 70 HRB, 80 HRB, 90 HRB, 100 HRB. Laboratories had to ensure that the primary Rockwell hardness machines passed the verification process according to ISO 6508-3. Then participants measured the hardness value by making ten indentations in a designated area of each artefact block. Hardness measurement results and uncertainty budget were then reported to the pilot laboratory and were used to compute the degrees of equivalence in terms of the Comparison Reference Value (CRV) and En ratio. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by APMP, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

Human Reliability and the Cost of Doing Business

NASA Technical Reports Server (NTRS)

DeMott, Diana

2014-01-01

Most businesses recognize that people will make mistakes and assume errors are just part of the cost of doing business, but does it need to be? Companies with high risk, or major consequences, should consider the effect of human error. In a variety of industries, Human Errors have caused costly failures and workplace injuries. These have included: airline mishaps, medical malpractice, administration of medication and major oil spills have all been blamed on human error. A technique to mitigate or even eliminate some of these costly human errors is the use of Human Reliability Analysis (HRA). Various methodologies are available to perform Human Reliability Assessments that range from identifying the most likely areas for concern to detailed assessments with human error failure probabilities calculated. Which methodology to use would be based on a variety of factors that would include: 1) how people react and act in different industries, and differing expectations based on industries standards, 2) factors that influence how the human errors could occur such as tasks, tools, environment, workplace, support, training and procedure, 3) type and availability of data and 4) how the industry views risk & reliability influences ( types of emergencies, contingencies and routine tasks versus cost based concerns). The Human Reliability Assessments should be the first step to reduce, mitigate or eliminate the costly mistakes or catastrophic failures. Using Human Reliability techniques to identify and classify human error risks allows a company more opportunities to mitigate or eliminate these risks and prevent costly failures.

Fifty Years of THERP and Human Reliability Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronald L. Boring

2012-06-01

In 1962 at a Human Factors Society symposium, Alan Swain presented a paper introducing a Technique for Human Error Rate Prediction (THERP). This was followed in 1963 by a Sandia Laboratories monograph outlining basic human error quantification using THERP and, in 1964, by a special journal edition of Human Factors on quantification of human performance. Throughout the 1960s, Swain and his colleagues focused on collecting human performance data for the Sandia Human Error Rate Bank (SHERB), primarily in connection with supporting the reliability of nuclear weapons assembly in the US. In 1969, Swain met with Jens Rasmussen of Risø Nationalmore » Laboratory and discussed the applicability of THERP to nuclear power applications. By 1975, in WASH-1400, Swain had articulated the use of THERP for nuclear power applications, and the approach was finalized in the watershed publication of the NUREG/CR-1278 in 1983. THERP is now 50 years old, and remains the most well known and most widely used HRA method. In this paper, the author discusses the history of THERP, based on published reports and personal communication and interviews with Swain. The author also outlines the significance of THERP. The foundations of human reliability analysis are found in THERP: human failure events, task analysis, performance shaping factors, human error probabilities, dependence, event trees, recovery, and pre- and post-initiating events were all introduced in THERP. While THERP is not without its detractors, and it is showing signs of its age in the face of newer technological applications, the longevity of THERP is a testament of its tremendous significance. THERP started the field of human reliability analysis. This paper concludes with a discussion of THERP in the context of newer methods, which can be seen as extensions of or departures from Swain’s pioneering work.« less

Quality of Kelantan drinking water and knowledge, attitude and practice among the population of Pasir Mas, Malaysia.

PubMed

Ab Razak, N H; Praveena, S M; Aris, A Z; Hashim, Z

2016-02-01

Information about the quality of drinking water, together with analysis of knowledge, attitude and practice (KAP) analysis and health risk assessment (HRA) remain limited. The aims of this study were: (1) to ascertain the level of KAP regarding heavy metal contamination of drinking water in Pasir Mas; (2) to determine the concentration of heavy metals (Al, Cr, Cu, Fe, Ni, Pb, Zn and Cd) in drinking water in Pasir Mas; and (3) to estimate the health risks (non-carcinogenic and carcinogenic) caused by heavy metal exposure through drinking water using hazard quotient and lifetime cancer risk. Information on KAP was collected using a standardized questionnaire. Heavy metal analysis of drinking water samples was performed using graphite furnace atomic absorption spectrophotometry. The population of Pasir Mas has good knowledge (80%), a less positive attitude (93%) and good practice (81%) towards heavy metal contamination of drinking water. The concentrations of heavy metals analysed in this study were found to be below the permissible limits for drinking water set by the Malaysian Ministry of Health and the World Health Organization. The HRA showed no potential non-carcinogenic and carcinogenic risks from the intake of heavy metal through drinking water. By investigating the quality of drinking water, KAP and HRA, the results of this study will provide authorities with the knowledge and resources to improve the management of drinking water quality in the future. Copyright © 2015 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Poster - 30: Use of a Hazard-Risk Analysis for development of a new eye immobilization tool for treatment of choroidal melanoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prooijen, Monique van; Breen, Stephen

Purpose: Our treatment for choroidal melanoma utilizes the GTC frame. The patient looks at a small LED to stabilize target position. The LED is attached to a metal arm attached to the GTC frame. A camera on the arm allows therapists to monitor patient compliance. To move to mask-based immobilization we need a new LED/camera attachment mechanism. We used a Hazard-Risk Analysis (HRA) to guide the design of the new tool. Method: A pre-clinical model was built with input from therapy and machine shop personnel. It consisted of an aluminum frame placed in aluminum guide posts attached to the couchmore » top. Further development was guided by the Department of Defense Standard Practice - System Safety hazard risk analysis technique. Results: An Orfit mask was selected because it allowed access to indexes on the couch top which assist with setup reproducibility. The first HRA table was created considering mechanical failure modes of the device. Discussions with operators and manufacturers identified other failure modes and solutions. HRA directed the design towards a safe clinical device. Conclusion: A new immobilization tool has been designed using hazard-risk analysis which resulted in an easier-to-use and safer tool compared to the initial design. The remaining risks are all low probability events and not dissimilar from those currently faced with the GTC setup. Given the gains in ease of use for therapists and patients as well as the lower costs for the hospital, we will implement this new tool.« less

Health risk appraisal and safety belt use

DOT National Transportation Integrated Search

1987-05-01

The primary objective of this study was to determine the effectiveness of health risk appraisal (HRA) programs for increasing claimed and observed safety belt use. HRA programs were field tested with and without supplemental educational materials on ...

Evaluating a Web-Based Health Risk Assessment With Tailored Feedback: What Does an Expert Focus Group Yield Compared to a Web-Based End-User Survey?

PubMed Central

Vosbergen, Sandra; Mahieu, Guy R; Laan, Eva K; Kraaijenhagen, Roderik A; Jaspers, Monique WM

2014-01-01

Background Increasingly, Web-based health applications are developed for the prevention and management of chronic diseases. However, their reach and utilization is often disappointing. Qualitative evaluations post-implementation can be used to inform the optimization process and ultimately enhance their adoption. In current practice, such evaluations are mainly performed with end-user surveys. However, a review approach by experts in a focus group may be easier to administer and might provide similar results. Objective The aim of this study was to assess whether industrial design engineers in a focus group would address the same issues as end users in a Web-based survey when evaluating a commercial Web-based health risk assessment (HRA) with tailored feedback. Methods Seven Dutch companies used the HRA as part of their corporate health management strategy. Employees using the HRA (N=2289) and 10 independent industrial designers were invited to participate in the study. The HRA consisted of four components: (1) an electronic health questionnaire, (2) biometric measurements, (3) laboratory evaluation, and (4) individually tailored feedback generated by decision support software. After participating in the HRA as end users, both end users and designers evaluated the program. End users completed an evaluation questionnaire that included a free-text field. Designers participated in a focus group discussion. Constructs from user satisfaction and technology acceptance theories were used to categorize and compare the remarks from both evaluations. Results We assessed and qualitatively analyzed 294 remarks of 189 end users and 337 remarks of 6 industrial designers, pertaining to 295 issues in total. Of those, 137 issues were addressed in the end-user survey and 148 issues in the designer focus group. Only 7.3% (10/137) of the issues addressed in the survey were also addressed in the focus group. End users made more remarks about the usefulness of the HRA and prior expectations that were not met. Designers made more remarks about how the information was presented to end users, quality of the feedback provided by the HRA, recommendations on the marketing and on how to create more unity in the design of the HRA, and on how to improve the HRA based on these issues. Conclusions End-user surveys should not be substituted for expert focus groups. Issues identified by end users in the survey and designers in the focus group differed considerably, and the focus group produced a lot of new issues. The issues addressed in the focus group often focused on different aspects of user satisfaction and technology acceptance than those addressed by the survey participants; when they did focus on the same aspects, then the nature of issues differed considerably in content. PMID:24384408

Evaluating a web-based health risk assessment with tailored feedback: what does an expert focus group yield compared to a web-based end-user survey?

PubMed

Vosbergen, Sandra; Mahieu, Guy R; Laan, Eva K; Kraaijenhagen, Roderik A; Jaspers, Monique Wm; Peek, Niels

2014-01-02

Increasingly, Web-based health applications are developed for the prevention and management of chronic diseases. However, their reach and utilization is often disappointing. Qualitative evaluations post-implementation can be used to inform the optimization process and ultimately enhance their adoption. In current practice, such evaluations are mainly performed with end-user surveys. However, a review approach by experts in a focus group may be easier to administer and might provide similar results. The aim of this study was to assess whether industrial design engineers in a focus group would address the same issues as end users in a Web-based survey when evaluating a commercial Web-based health risk assessment (HRA) with tailored feedback. Seven Dutch companies used the HRA as part of their corporate health management strategy. Employees using the HRA (N=2289) and 10 independent industrial designers were invited to participate in the study. The HRA consisted of four components: (1) an electronic health questionnaire, (2) biometric measurements, (3) laboratory evaluation, and (4) individually tailored feedback generated by decision support software. After participating in the HRA as end users, both end users and designers evaluated the program. End users completed an evaluation questionnaire that included a free-text field. Designers participated in a focus group discussion. Constructs from user satisfaction and technology acceptance theories were used to categorize and compare the remarks from both evaluations. We assessed and qualitatively analyzed 294 remarks of 189 end users and 337 remarks of 6 industrial designers, pertaining to 295 issues in total. Of those, 137 issues were addressed in the end-user survey and 148 issues in the designer focus group. Only 7.3% (10/137) of the issues addressed in the survey were also addressed in the focus group. End users made more remarks about the usefulness of the HRA and prior expectations that were not met. Designers made more remarks about how the information was presented to end users, quality of the feedback provided by the HRA, recommendations on the marketing and on how to create more unity in the design of the HRA, and on how to improve the HRA based on these issues. End-user surveys should not be substituted for expert focus groups. Issues identified by end users in the survey and designers in the focus group differed considerably, and the focus group produced a lot of new issues. The issues addressed in the focus group often focused on different aspects of user satisfaction and technology acceptance than those addressed by the survey participants; when they did focus on the same aspects, then the nature of issues differed considerably in content.

Metal-on-Metal Hip Resurfacing Arthroplasty

PubMed Central

Sehatzadeh, S; Kaulback, K; Levin, L

2012-01-01

Background Metal-on-metal (MOM) hip resurfacing arthroplasty (HRA) is in clinical use as an appropriate alternative to total hip arthroplasty in young patients. In this technique, a metal cap is placed on the femoral head to cover the damaged surface of the bone and a metal cup is placed in the acetabulum. Objectives The primary objective of this analysis was to compare the revision rates of MOM HRA using different implants with the benchmark set by the National Institute of Clinical Excellence (NICE). The secondary objective of this analysis was to review the literature regarding adverse biological effects associated with implant material. Review Methods A literature search was performed on February 13, 2012, to identify studies published from January 1, 2009, to February 13, 2012. Results The revision rates for MOM HRA using 6 different implants were reviewed. The revision rates for MOM HRA with 3 implants met the NICE criteria, i.e., a revision rate of 10% or less at 10 years. Two implants had short-term follow-ups and MOM HRA with one of the implants failed to meet the NICE criteria. Adverse tissue reactions resulting in failure of the implants have been reported by several studies. With a better understanding of the factors that influence the wear rate of the implants, adverse tissue reactions and subsequent implant failure can be minimized. Many authors have suggested that patient selection and surgical technique affect the wear rate and the risk of tissue reactions. The biological effects of high metal ion levels in the blood and urine of patients with MOM HRA implants are not known. Studies have shown an increase in chromosomal aberrations in patients with MOM articulations, but the clinical implications and long-term consequences of this increase are still unknown. Epidemiological studies have shown that patients with MOM HRA implants did not have an overall increase in mortality or risk of cancer. There is insufficient clinical data to confirm the teratogenicity of MOM implants in humans. Conclusions Metal-on-metal HRA can be beneficial for appropriately selected patients, provided the surgeon has the surgical skills required for performing this procedure. Plain Language Summary There are many young patients with hip diseases who need to have hip replacement surgery. Although a traditional hip replacement is an acceptable procedure for these patients, some surgeons prefer using a newer technique in young patients called hip resurfacing. In this technique, instead of removing the head of the femoral bone, a metal cap is placed on the femoral head to cover the damaged surface of the bone and a metal cup is placed in the hip socket, similar to the cups used in traditional hip replacement. The analysis of the revision rates (i.e., how soon and in how many patients the surgery needs to be redone) and safety of resurfacing implants showed that generally these implants can last 10 years or more for the majority of young people. Good outcomes can be expected when skilled surgeons perform the surgery in properly selected patients. However, since these implants are made of metal (cobalt and chromium alloy), there is concern about excess metal debris production due to friction between the 2 metal components leading to high levels of metal ions in the blood and urine of patients. The production of metal debris may result in inflammation in the joint or development of a benign soft tissue mass leading to implant failure. However, it has been shown that this risk can be reduced by proper positioning of the implant and the careful selection of patients for this procedure. Little is known about the long-term biological effects of high levels of metal ions in the blood and urine of patients who have received metal implants. There is concern about potential increases in the risk of cancer and the risk of fetal abnormalities, but these effects have not been established yet. However, since cobalt and chromium can pass the placental barrier, implants that are not metal-on-metal are recommended for women at childbearing ages if they need a hip replacement. PMID:23074429

[Braking capacity after hip arthroplasty - effect of prosthesis design and preoperative status].

PubMed

Franz, A; Mannel, H; Brüggemann, G-P; Schmidt, J

2012-10-01

Driving a car is an important everyday activity. However, the patients' desire to resume driving at an early stage after hip arthroplasty is often faced by the uncertainty about their driving ability. Only little evidence is available to support the clinical decision-making with regard to driving competence after conventional total hip arthroplasty (THA). However, there is no proof that the results observed after THA can be transferred to hip resurfacing arthroplasty (HRA) patients. Due to physiological advantages, i.e., patient age and activity, as well as the special biomechanical implant characteristics, HRA patients could be expected to achieve normal braking capacity at an earlier stage in the rehabilitation process than THA patients. This could be achieved by an accelerated postoperative recovery or could depend on the preoperative vantage point concerning the patients' braking capacity. To verify this hypothesis HRA and THA patients were compared to healthy subjects concerning their ability to perform an emergency braking manoeuvre in a car simulator before surgery, and at 6 weeks and 3 months after operation. Furthermore, postoperative recovery rates were compared between the two groups of patients. In addition, correlations between pre- and postoperative braking capacity were tested. Reaction time, movement time and force-time integral on the brake pedal were analysed. Except for a deficient preoperative force-time integral, no significant differences were detected in HRA patients compared to healthy controls. In contrast THA patients required, pre- as well as postoperatively, a longer movement time and exhibited a smaller force-time integral. The two patient groups did not show any significant difference in recovery rates of movement time and force-time integral. However, considering the two patient groups as a whole, a significant correlation was detected between existing pre- and postoperative deficits. In conclusion, it can be confirmed that HRA patients resume normal braking capacity at an earlier stage in their rehabilitation process than THA patients. Patients recommended for HRA recover braking capacity at the latest six weeks after surgery. This capacity clearly depends on the better preoperative status of the HRA patients and is not determined by a faster recovery rate. General patient-related advantages as well as biomechanical aspects of HRA have thus no influence on the recovery rates of braking capacity during the first three months after surgery. Due to the increasing outpatient rehabilitation regime after HRA, further studies are necessary to detect the turning point after surgical impairment within the first six weeks after surgery. Concerning the THA patients we recommend a longer safety distance when driving a car for up to three months after the operation. However, patients, especially those assigned to THA, should be made aware of their most likely already existing preoperative deficit. For clinical practice a rough estimation of postoperative braking capacity seems to be possible based on group assignment (HRA/THA). Nevertheless, deviators cannot be detected by this group classification. As driving simulator systems usually are not available in hospitals, a more accurate prognosis, i.e., based on established clinical scores, would be helpful. Georg Thieme Verlag KG Stuttgart · New York.

Reliability of drivers in urban intersections.

PubMed

Gstalter, Herbert; Fastenmeier, Wolfgang

2010-01-01

The concept of human reliability has been widely used in industrial settings by human factors experts to optimise the person-task fit. Reliability is estimated by the probability that a task will successfully be completed by personnel in a given stage of system operation. Human Reliability Analysis (HRA) is a technique used to calculate human error probabilities as the ratio of errors committed to the number of opportunities for that error. To transfer this notion to the measurement of car driver reliability the following components are necessary: a taxonomy of driving tasks, a definition of correct behaviour in each of these tasks, a list of errors as deviations from the correct actions and an adequate observation method to register errors and opportunities for these errors. Use of the SAFE-task analysis procedure recently made it possible to derive driver errors directly from the normative analysis of behavioural requirements. Driver reliability estimates could be used to compare groups of tasks (e.g. different types of intersections with their respective regulations) as well as groups of drivers' or individual drivers' aptitudes. This approach was tested in a field study with 62 drivers of different age groups. The subjects drove an instrumented car and had to complete an urban test route, the main features of which were 18 intersections representing six different driving tasks. The subjects were accompanied by two trained observers who recorded driver errors using standardized observation sheets. Results indicate that error indices often vary between both the age group of drivers and the type of driving task. The highest error indices occurred in the non-signalised intersection tasks and the roundabout, which exactly equals the corresponding ratings of task complexity from the SAFE analysis. A comparison of age groups clearly shows the disadvantage of older drivers, whose error indices in nearly all tasks are significantly higher than those of the other groups. The vast majority of these errors could be explained by high task load in the intersections, as they represent difficult tasks. The discussion shows how reliability estimates can be used in a constructive way to propose changes in car design, intersection layout and regulation as well as driver training.

The implications of the Human Rights Act 1998 for the removal and detention of persons in need of care and attention.

PubMed

Hewitt, D

2002-03-01

The Human Rights Act 1998 ('HRA 1998') requires public authorities to act compatibly with the European Convention on Human Rights ('ECHR'). The ECHR contains rights, inter alia, to liberty and to respect for private life. Those rights--and, therefore, the HRA 1998--may be breached by provisions in the National Assistance Act 1948 and the National Assistance (Amendment) Act 1951 that enable persons in need of care and attention to be removed compulsorily to hospital. However, legal proceedings brought against a public authority that invoked its statuatory powers of removal may themselves be defensible under the HRA.

A HUMAN RELIABILITY-CENTERED APPROACH TO THE DEVELOPMENT OF JOB AIDS FOR REVIEWERS OF MEDICAL DEVICES THAT USE RADIOLOGICAL BYPRODUCT MATERIALS.

DOE Office of Scientific and Technical Information (OSTI.GOV)

COOPER, S.E.; BROWN, W.S.; WREATHALL, J.

2005-02-02

The U.S. Nuclear Regulatory Commission (NRC) is engaged in an initiative to risk-inform the regulation of byproduct materials. Operating experience indicates that human actions play a dominant role in most of the activities involving byproduct materials, which are radioactive materials other than those used in nuclear power plants or in weapons production, primarily for medical or industrial purposes. The overall risk of these activities is strongly influenced by human performance. Hence, an improved understanding of human error, its causes and contexts, and human reliability analysis (HRA) is important in risk-informing the regulation of these activities. The development of the humanmore » performance job aids was undertaken by stages, with frequent interaction with the prospective users. First, potentially risk significant human actions were identified based on reviews of available risk studies for byproduct material applications and of descriptions of events for byproduct materials applications that involved potentially significant human actions. Applications from the medical and the industrial domains were sampled. Next, the specific needs of the expected users of the human performance-related capabilities were determined. To do this, NRC headquarters and region staff were interviewed to identify the types of activities (e.g., license reviews, inspections, event assessments) that need HRA support and the form in which such support might best be offered. Because the range of byproduct uses regulated by NRC is so broad, it was decided that initial development of knowledge and tools would be undertaken in the context of a specific use of byproduct material, which was selected in consultation with NRC staff. Based on needs of NRC staff and the human performance related characteristics of the context chosen, knowledge resources were then compiled to support consideration of human performance issues related to the regulation of byproduct materials. Finally, with information sources and an application context identified, a set of strawman job aids was developed, which was then presented to prospective users for critique and comment. Work is currently under way to develop training materials and refine the job aids in preparation for a pilot evaluation.« less

The Answer Is Blowing in the Wind. Investment in Training from a Human Resource Accounting Perspective.

ERIC Educational Resources Information Center

Johanson, Ulf

1998-01-01

Presents components of human resource accounting (HRA)--description of human resource costs, estimation of return on investment, estimation of human resource values. Reviews research on the influence of HRA on decision making, concluding that a number of factors inhibit its effective use. (SK)

Correlation between Trunk Posture and Neck Reposition Sense among Subjects with Forward Head Neck Postures

PubMed Central

Lee, Han Suk; Chung, Hyung Kuk; Park, Sun Wook

2015-01-01

Objective. To assess the correlation of abnormal trunk postures and reposition sense of subjects with forward head neck posture (FHP). Methods. In all, postures of 41 subjects were evaluated and the FHP and trunk posture including shoulder, scapular level, pelvic side, and anterior tilting degrees were analyzed. We used the head repositioning accuracy (HRA) test to evaluate neck position senses of neck flexion, neck extension, neck right and left side flexion, and neck right and left rotation and calculated the root mean square error in trials for each subject. Spearman's rank correlation coefficients and regression analysis were used to assess the degree of correlation between the trunk posture and HRA value, and a significance level of α = 0.05 was considered. Results. There were significant correlations between the HRA value of right side neck flexion and pelvic side tilt angle (p < 0.05). If pelvic side tilting angle increases by 1 degree, right side neck flexion increased by 0.76 degrees (p = 0.026). However, there were no significant correlations between other neck motions and trunk postures. Conclusion. Verifying pelvic postures should be prioritized when movement is limited due to the vitiation of the proprioceptive sense of neck caused by FHP. PMID:26583125

Time spent on health related activities associated with chronic illness: a scoping literature review.

PubMed

Jowsey, Tanisha; Yen, Laurann; W, Paul Mathews

2012-12-03

The management of health care, particularly for people with chronic conditions, combines the activities of health professionals, patients, informal carers and social networks that support them. Understanding the non-professional roles in health management requires information about the health related activities (HRA) that are undertaken by patients and informal carers. This understanding allows management planning that incorporates the capacity of patients and informal carers, as well as identifying the particular skills, knowledge and technical support that are necessary. This review was undertaken to identify how much time people with chronic illness and their informal carers spend on HRA. Literature searches of three electronic databases (CINAHL, Medline, and PubMed) and two journals (Time and Society, Sociology of Health and Illness) were carried out in 2011 using the following search terms (and derivatives): chronic illness AND time AND consumer OR carer. The search was aimed at finding studies of time spent on HRA. A scoping literature review method was utilised. Twenty-two peer reviewed articles published between 1990 and 2010 were included for review. The review identified limited but specific studies about time use by people with a chronic illness and/or their carers. While illness work was seen as demanding, few studies combined inquiry about both defined tasks and defined time use. It also identified methodological issues such as consistency of definition and data collection methods, which remain unresolved. While HRA are seen as demanding by people doing them, few studies have measured actual time taken to carry out a comprehensive range of HRA. The results of this review suggest that both patients with chronic illness and informal carers may be spending 2 hours a day or more on HRA. Illnesses such as diabetes may be associated with higher time use. More empirical research is needed to understand the time demands of self-management, particularly for those affected by chronic illness.

Design and baseline characteristics of the PerfectFit study: a multicenter cluster-randomized trial of a lifestyle intervention in employees with increased cardiovascular risk.

PubMed

Kouwenhoven-Pasmooij, Tessa A; Djikanovic, Bosiljka; Robroek, Suzan J W; Helmhout, Pieter; Burdorf, Alex; Hunink, M G Myriam

2015-07-28

The prevalence of unhealthy lifestyles and preventable chronic diseases is high. They lead to disabilities and sickness absence, which might be reduced if health promotion measures were applied. Therefore, we developed the PerfectFit health promotion intervention with a "blended care"-approach, which consists of a web-based health risk assessment (HRA) including tailored and personalized advice, followed by motivational interviewing (MI). We hypothesize that adding MI to a web-based HRA leads to better health outcomes. The objective is to describe the design and baseline characteristics of the PerfectFit study, which is being conducted among employees with high cardiovascular risk in the military workforce, the police organization and an academic hospital. PerfectFit is a cluster randomized controlled trial, consisting of two arms. Based on cardiovascular risk profiling, done between 2012 and 2014, we included employees based on one or more risk factors and motivation to participate. One arm is the 'limited' health program (control) that consists of: (a) an HRA as a decision aid for lifestyle changes, including tailored and personalized advice, and pros and cons of the options, and (b) a newsletter every 3 months. The other arm is the 'extensive' program (intervention), which is additionally offered MI-sessions by trained occupational physicians, 4 face-to-face and 3 by telephone, and is offered more choices of health promotion activities in the HRA. During the follow-up period, participants choose the health promotion activities they personally prefer. After six and twelve months, outcomes will be assessed by online questionnaires. After twelve months the cardiovascular risk profiling will be repeated. The primary outcome is self-reported general health. Secondary outcomes are self-reported work ability, CVD-risk score, sickness absence, productivity loss at work, participation in health promotion activities, changes in lifestyle (smoking, alcohol consumption, physical activity, stress management) and body mass index. Furthermore, a process evaluation and an economic analysis will be performed. Additional coaching using MI is expected to be a key factor for success of the web-based HRA in employees with increased cardiovascular risk. This "blended care"-approach may be an essential strategy for effective health promotion activities. Dutch Trial Register by registration number NTR4894 , 14/11/2014.

A randomized trial of effects of health risk appraisal combined with group sessions or home visits on preventive behaviors in older adults.

PubMed

Dapp, Ulrike; Anders, Jennifer A M; von Renteln-Kruse, Wolfgang; Minder, Christoph E; Meier-Baumgartner, Hans Peter; Swift, Cameron G; Gillmann, Gerhard; Egger, Matthias; Beck, John C; Stuck, Andreas E

2011-05-01

To explore effects of a health risk appraisal for older people (HRA-O) program with reinforcement, we conducted a randomized controlled trial in 21 general practices in Hamburg, Germany. Overall, 2,580 older patients of 14 general practitioners trained in reinforcing recommendations related to HRA-O-identified risk factors were randomized into intervention (n = 878) and control (n = 1,702) groups. Patients (n = 746) of seven additional matched general practitioners who did not receive this training served as a comparison group. Patients allocated to the intervention group, and their general practitioners, received computer-tailored written recommendations, and patients were offered the choice between interdisciplinary group sessions (geriatrician, physiotherapist, social worker, and nutritionist) and home visits (nurse). Among the intervention group, 580 (66%) persons made use of personal reinforcement (group sessions: 503 [87%], home visits: 77 [13%]). At 1-year follow-up, persons in the intervention group had higher use of preventive services (eg, influenza vaccinations, adjusted odds ratio 1.7; 95% confidence interval 1.4-2.1) and more favorable health behavior (eg, high fruit/fiber intake, odds ratio 2.0; 95% confidence interval 1.6-2.6), as compared with controls. Comparisons between intervention and comparison group data revealed similar effects, suggesting that physician training alone had no effect. Subgroup analyses indicated favorable effects for HRA-O with personal reinforcement, but not for HRA-O without reinforcement. HRA-O combined with physician training and personal reinforcement had favorable effects on preventive care use and health behavior.

Improvement after chiropractic care in cervicocephalic kinesthetic sensibility and subjective pain intensity in patients with nontraumatic chronic neck pain.

PubMed

Palmgren, Per J; Sandström, Peter J; Lundqvist, Fredrik J; Heikkilä, Hannu

2006-02-01

The objective of this study was to examine alteration in head repositioning accuracy (HRA), range of motion, and pain intensity in patients with chronic cervical pain syndrome without a history of cervical trauma. The study was a prospective, randomized, controlled trial. Forty-one patients with chronic cervical pain were randomly assigned to either a control group or a chiropractic treatment group. All patients were clinically examined, given general information on cervical pain, and provided with training instructions based on the clinical evaluation. The treatment included sessions with high-velocity and low-amplitude manipulation, proprioceptive neuromuscular facilitation, ischemic compression of myofascial trigger points, and spinal rehabilitation exercises aiming to normalize cervical range of motion (CROM) and HRA. Subjective pain intensity, cervical kinesthetic sensibility, and CROM were recorded before and after the study period. There was no difference between the treatment patients and the control subjects at the beginning with regard to age, sex, subjective pain intensity, range of motion, and HRA. At the 5-week follow-up, the treatment patients showed significant reductions in pain and improvement of all HRA aspects measured whereas the control subjects did not show any reduction in pain and improvement in only one HRA aspect. No significant difference was detected in CROM. The results of this study suggest that chiropractic care can be effective in influencing the complex process of proprioceptive sensibility and pain of cervical origin. Short, specific chiropractic treatment programs with proper patient information may alter the course of chronic cervical pain.

What is needed to implement a computer-assisted health risk assessment tool? An exploratory concept mapping study

PubMed Central

2012-01-01

Background Emerging eHealth tools could facilitate the delivery of comprehensive care in time-constrained clinical settings. One such tool is interactive computer-assisted health-risk assessments (HRA), which may improve provider-patient communication at the point of care, particularly for psychosocial health concerns, which remain under-detected in clinical encounters. The research team explored the perspectives of healthcare providers representing a variety of disciplines (physicians, nurses, social workers, allied staff) regarding the factors required for implementation of an interactive HRA on psychosocial health. Methods The research team employed a semi-qualitative participatory method known as Concept Mapping, which involved three distinct phases. First, in face-to-face and online brainstorming sessions, participants responded to an open-ended central question: “What factors should be in place within your clinical setting to support an effective computer-assisted screening tool for psychosocial risks?” The brainstormed items were consolidated by the research team. Then, in face-to-face and online sorting sessions, participants grouped the items thematically as ‘it made sense to them’. Participants also rated each item on a 5-point scale for its ‘importance’ and ‘action feasibility’ over the ensuing six month period. The sorted and rated data was analyzed using multidimensional scaling and hierarchical cluster analyses which produced visual maps. In the third and final phase, the face-to-face Interpretation sessions, the concept maps were discussed and illuminated by participants collectively. Results Overall, 54 providers participated (emergency care 48%; primary care 52%). Participants brainstormed 196 items thought to be necessary for the implementation of an interactive HRA emphasizing psychosocial health. These were consolidated by the research team into 85 items. After sorting and rating, cluster analysis revealed a concept map with a seven-cluster solution: 1) the HRA’s equitable availability; 2) the HRA’s ease of use and appropriateness; 3) the content of the HRA survey; 4) patient confidentiality and choice; 5) patient comfort through humanistic touch; 6) professional development, care and workload; and 7) clinical management protocol. Drawing insight from the theoretical lens of Sociotechnical theory, the seven clusters of factors required for HRA implementation could be read as belonging to three overarching aspects : Technical (cluster 1, 2 and 3), Social-Patient (cluster 4 and 5), and Social-Provider (cluster 6 and 7). Participants rated every one of the clusters as important, with mean scores from 4.0 to 4.5. Their scores for feasibility were somewhat lower, ranging from 3.4 to. 4.3. Comparing the scores for importance and feasibility, a significant difference was found for one cluster from each region (cluster 2, 5, 6). The cluster on professional development, care and workload was perceived as especially challenging in emergency department settings, and possible reasons were discussed in the interpretation sessions. Conclusion A number of intertwined multilevel factors emerged as important for the implementation of a computer-assisted, interactive HRA with a focus on psychosocial health. Future developments in this area could benefit from systems thinking and insights from theoretical perspectives, such as sociotechnical system theory for joint optimization and responsible autonomy, with emphasis on both the technical and social aspects of HRA implementation. PMID:23253913

Assessing the transfer of risk due to transportation of agricultural products.

PubMed

Li, Pei-Chiun; Shih, Hsiu-Ching; Ma, Hwong-Wen

2015-02-01

Health risk assessment (HRA) is the process used to estimate adverse health effects on humans. The importance and sensitivity of food chains to HRA have been observed, but the impact of the transportation of food has generally been ignored. This study developed an exposure assessment to demonstrate the significance of the transportation of agricultural products in HRA. The associated case study estimated the health risks derived from various sources of arsenic emissions in Taiwan. Two assessment scenarios, self-sufficiency and transportation of agricultural products, were compared to calculate risk transfer ratios that show the impact of agriculture transportation. The risk transfer ratios found by the study range from 0.22 to 42.10, indicating that the quantity of transportation of agricultural products is the critical factor. High air deposition and high agricultural production are the two main contributors to the effect of the transportation of agricultural products on HRA. Risk reduction measures could be applied to high-pollution areas as well as to areas with high agricultural productivity to reduce ingestion risks to residents. Certain areas that are sensitive to the transportation of agricultural products may incur more risks if emissions increase in agriculturally productive counties. Copyright © 2014 Elsevier Ltd. All rights reserved.

Use of limited data to construct Bayesian networks for probabilistic risk assessment.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Groth, Katrina M.; Swiler, Laura Painton

2013-03-01

Probabilistic Risk Assessment (PRA) is a fundamental part of safety/quality assurance for nuclear power and nuclear weapons. Traditional PRA very effectively models complex hardware system risks using binary probabilistic models. However, traditional PRA models are not flexible enough to accommodate non-binary soft-causal factors, such as digital instrumentation&control, passive components, aging, common cause failure, and human errors. Bayesian Networks offer the opportunity to incorporate these risks into the PRA framework. This report describes the results of an early career LDRD project titled %E2%80%9CUse of Limited Data to Construct Bayesian Networks for Probabilistic Risk Assessment%E2%80%9D. The goal of the work was tomore » establish the capability to develop Bayesian Networks from sparse data, and to demonstrate this capability by producing a data-informed Bayesian Network for use in Human Reliability Analysis (HRA) as part of nuclear power plant Probabilistic Risk Assessment (PRA). This report summarizes the research goal and major products of the research.« less

The Impact of Two Workplace-Based Health Risk Appraisal Interventions on Employee Lifestyle Parameters, Mental Health and Work Ability: Results of a Randomized Controlled Trial

ERIC Educational Resources Information Center

Addley, K.; Boyd, S.; Kerr, R.; McQuillan, P.; Houdmont, J.; McCrory, M.

2014-01-01

Health risk appraisals (HRA) are a common type of workplace health promotion programme offered by American employers. In the United Kingdom, evidence of their effectiveness for promoting health behaviour change remains inconclusive. This randomized controlled trial examined the effects of two HRA interventions on lifestyle parameters, mental…

Predictive Ability of Pender's Health Promotion Model for Physical Activity and Exercise in People with Spinal Cord Injuries: A Hierarchical Regression Analysis

ERIC Educational Resources Information Center

Keegan, John P.; Chan, Fong; Ditchman, Nicole; Chiu, Chung-Yi

2012-01-01

The main objective of this study was to validate Pender's Health Promotion Model (HPM) as a motivational model for exercise/physical activity self-management for people with spinal cord injuries (SCIs). Quantitative descriptive research design using hierarchical regression analysis (HRA) was used. A total of 126 individuals with SCI were recruited…

Atypical hemispheric specialization for faces in infants at risk for autism spectrum disorder.

PubMed

Keehn, Brandon; Vogel-Farley, Vanessa; Tager-Flusberg, Helen; Nelson, Charles A

2015-04-01

Among the many experimental findings that tend to distinguish those with and without autism spectrum disorder (ASD) are face processing deficits, reduced hemispheric specialization, and atypical neurostructural and functional connectivity. To investigate the earliest manifestations of these features, we examined lateralization of event-related gamma-band coherence to faces during the first year of life in infants at high risk for autism (HRA; defined as having an older sibling with ASD) who were compared with low-risk comparison (LRC) infants, defined as having no family history of ASD. Participants included 49 HRA and 46 LRC infants who contributed a total of 127 data sets at 6 and 12 months. Electroencephalography was recorded while infants viewed images of familiar/unfamiliar faces. Event-related gamma-band (30-50 Hz) phase coherence between anterior-posterior electrode pairs for left and right hemispheres was computed. Developmental trajectories for lateralization of intra-hemispheric coherence were significantly different in HRA and LRC infants: by 12 months, HRA infants showed significantly greater leftward lateralization compared with LRC infants who showed rightward lateralization. Preliminary results indicate that infants who later met criteria for ASD were those that showed the greatest leftward lateralization. HRA infants demonstrate an aberrant pattern of leftward lateralization of intra-hemispheric coherence by the end of the first year of life, suggesting that the network specialized for face processing may develop atypically. Further, infants with the greatest leftward asymmetry at 12 months where those that later met criteria for ASD, providing support to the growing body of evidence that atypical hemispheric specialization may be an early neurobiological marker for ASD. © 2015 International Society for Autism Research, Wiley Periodicals, Inc.

High-resolution anoscopy screening of HIV-positive MSM: longitudinal results from a pilot study.

PubMed

Dalla Pria, Alessia; Alfa-Wali, Maryam; Fox, Paul; Holmes, Paul; Weir, Justin; Francis, Nicholas; Bower, Mark

2014-03-27

The ability to detect and treat pre-malignant anal lesions suggests screening may prevent anal cancer. The incidence of anal cancer in men who have sex with men (MSM) living with HIV exceeds that of cervical cancer before screening was introduced. High-resolution anoscopy (HRA) with intervention for high-grade squamous intraepithelial lesions (HSILs) was offered to asymptomatic HIV-positive MSM. Patients with HSILs were treated and follow-up HRA performed after 6 months, whilst patients with low-grade squamous intraepithelial lesions had a repeat HRA after 12 months. Three hundred and sixty-eight asymptomatic MSM had a total of 1497 HRAs during a median follow-up of 4.2 years (maximum 13 years). At first HRA, 36% had normal appearances, 16% had no dysplasia, 15% anal intraepithelial neoplasia (AIN)-1, 19% AIN-2 and 13% AIN-3. During follow-up, five patients (1.4%) developed invasive anal cancer (incidence 2.7 per 1000 person-years). The 5-year cancer rate for the 368 patients was 0.3% [95% confidence interval (CI) 0-0.6%]. Progression to cancer was associated with higher age (P=0.049) and AIN-3 (P=0.024). Ninety patients had AIN-3 present at least at one HRA. The cumulative risk of cancer from first AIN-3 diagnosis was 3.2% (95% CI 0-7.8%) at 5 years. One hundred and seventy-one patients had HSILs (AIN-2 or 3) present at least once. The cumulative risk of cancer from first HSIL diagnosis was 0.6% (95% CI 0-1.8%) at 5 years. AIN-3 is a significant risk factor for subsequent anal cancer, although the tumours detected in screened patients were small localized, and generally the outcomes were favourable.

Article 8 of the human rights act 1998: a review of case law related to forensic psychiatry and prisoners in the United Kingdom.

PubMed

Curtice, Martin J R; Sandford, John J

2009-01-01

The Human Rights Act 1998 (HRA) was introduced into United Kingdom domestic law in 2000 and incorporated most of the European Convention on Human Rights. Article 8 of the HRA provides the right to respect for private and family life, home, and correspondence. It is a qualified right, underpinned by the core HRA principle of proportionality and therefore can be dynamically interpreted. The forensic and prison settings in the United Kingdom have produced numerous cases based on perceived infringements that may or may not have breached Article 8. These cases, when analyzed, help both to demonstrate how Article 8 may be breached in clinical practice and to illustrate key Article 8 principles that can be used and implemented in clinical practice to safeguard both clinicians and patients.

[In vivo spetrometric analysis of the electrical impedance of the first leaf of maize (Zea mays L.) as a function of soil and atmosphere hydrous conditions].

PubMed

Laarabi, Saïd; El Kinani, Khalifa; Ettouhami, Aziz; Limouri, Mohammed

2005-05-01

In vivo spectrometric analysis of the electrical impedance of the first leaf of maize (Zea mays L.) as a function of soil and atmosphere hydrous conditions. We have measured the electrical resistance and capacitance of the first leaf of maize aged 14 days. The plants were cultivated at different levels of soil and atmospheric humidity and submitted to quiet or agitated air. In 'control' plants cultivated in quiet air under moderate relative humidity (HRA) (50 to 60%), the amplitude of the spectrometric bioimpedance spectrum (CSB) increased with the quantity of water available to the roots. Agitated air or elevated HRA increased the magnitude of the CSB in plants cultivated at 40% of the maximal retention capacity (CRM) of the soil. On the other hand, the CSB decreased in plants cultivated at 60% of the CRM or in hydroponics. This was accompanied by a dramatic decrease in the electrical resistance. The action of the atmospheric factors studied depends on the quantity of water where the roots are bathing.

Psychosocial variables and time to injury onset: a hurdle regression analysis model.

PubMed

Sibold, Jeremy; Zizzi, Samuel

2012-01-01

Psychological variables have been shown to be related to athletic injury and time missed from participation in sport. We are unaware of any empirical examination of the influence of psychological variables on time to onset of injury. To examine the influence of orthopaedic and psychosocial variables on time to injury in college athletes. One hundred seventy-seven (men 5 116, women 5 61; age 5 19.45 6 1.39 years) National Collegiate Athletic Association Division II athletes. Hurdle regression analysis (HRA) was used to determine the influence of predictor variables on days to first injury. Worry (z = 2.98, P = .003), concentration disruption (z = -3.95, P < .001), and negative life-event stress (z = 5.02, P < .001) were robust predictors of days to injury. Orthopaedic risk score was not a predictor (z = 1.28, P = .20). These findings support previous research on the stress-injury relationship, and our group is the first to use HRA in athletic injury data. These data support the addition of psychological screening as part of preseason health examinations for collegiate athletes.

Comparing excess costs across multiple corporate populations.

PubMed

Wright, Douglas; Adams, Laura; Beard, Marshall J; Burton, Wayne N; Hirschland, David; McDonald, Timothy; Napier, Deborah; Galante, Salvatore; Smith, Thomas; Edington, D W

2004-09-01

The purpose of this study was to examine the relationship of health risk level to charged medical costs and determine the excess cost of higher risk individuals compared to low risk. Two years of medical claims from six corporations were used to determine costs of health risk assessment (HRA) participants and nonparticipants. A total of 165,770 employees, 21,124 of which took an HRA, were used for the study. Costs increased as risk level increased. There were no significant differences within a risk level between companies for the cost ratio. Percent of medical costs due to excess risk ranged from 15.0-30.8% for HRA participants and 23.8-38.3% for the study population. Cost patterns were consistent across companies. Excess cost as the result of increased risk level accounted for a substantial portion of the cost at each company. These results can be used to justify the need for a health-promotion program and to estimate potential savings as the result of excess risk. Even without the use of an HRA, health practitioners should feel confident stating that excess risk accounts for at least 25% to 30% of medical costs per year across a wide variety of companies, regardless of industry or demographics. The numbers can be used as a realistic estimate for any health promotion program financial proposal.

Health risk appraisals in Swedish occupational health services

PubMed Central

Grooten, Wilhelmus Johannes Andreas; Müller, Mira; Forsman, Mikael; Kjellberg, Katarina; Toomingas, Allan; Björn Olov, Ång; Svartengren, Magnus

2016-01-01

BACKGROUND: Health risk appraisals (HRAs) in occupational health services (OHS) in Sweden are very commonly used for health promotion issues, but not much research has explored the extent and nature of individual feedback that is provided. OBJECTIVES: This study aimed to describe and explore HRAs in OHS regarding the content of the feedback in relation to the individual status and overall employee satisfaction. METHODS: Feedback (evaluation and advice) and employee satisfaction with HRA were studied in employees that participated in health risk appraisals with a specific feedback session (HRA-F) (n = 272) and employees that participated in a single session (HRA-S) (n = 104). Associations between feedback and individual status concerning life style were assessed with Cohen’s kappa (k). RESULTS: The employees received mainly information and advice for improvement on health and lifestyle issues (89–100%), while advice for improvement of working conditions was less common (15–59%). The feedback provided on life style was not based on individual status (k < 0.4), except for smoking and risky alcohol consumption (k > 0.55). A great majority of employees reported good overall satisfaction with their HRAs. CONCLUSIONS: The evaluation and feedback given to employees after HRAs should be based more on HRA-results and advice could be focused more on work-related factors. PMID:28059808

The effect of normalizing the sagittal cervical configuration on dizziness, neck pain, and cervicocephalic kinesthetic sensibility: a 1-year randomized controlled study.

PubMed

Moustafa, Ibrahim M; Diab, Aliaa A; Harrison, Deed E

2017-02-01

Cervicogenic dizziness is a disabling condition commonly associated with cervical dysfunction. Although the growing interest with the importance of normal sagittal configuration of cervical spine, the missing component in the management of cervicogenic dizziness might be altered structural alignment of the cervical spinal region itself. To investigate the immediate and long-term effects of a 1-year multimodal program, with the addition of cervical lordosis restoration and anterior head translation (AHT) correction, on the severity of dizziness, disability, cervicocephalic kinesthetic sensibility, and cervical pain in patients with cervicogenic dizziness. A randomized controlled study with a 1 year and 10 weeks' follow-up. University research laboratory. Seventy-two patients (25 female) between 40 and 55 years with cervicogenic dizziness, a definite hypolordotic cervical spine and AHT posture were randomly assigned to the control or an experimental group. Both groups received the multimodal program; additionally, the experimental group received the Denneroll™ cervical traction. Outcome measures included AHT distance, cervical lordosis, dizziness handicap inventory (DHI), severity of dizziness, dizziness frequency, head repositioning accuracy (HRA) and cervical pain. Measures were assessed at three time intervals: baseline, 10 weeks, and follow-up at 1 year and 10 weeks. Significant group × time effects at both the 10 week post treatment and the 1-year follow-up were identified favoring the experimental group for measures of cervical lordosis (P<0.0005) and anterior head translation (P<0.0005). At 10 weeks, the between group analysis showed equal improvements in dizziness outcome measures, pain intensity, and HRA; DHI scale (P=0.5), severity of dizziness (P=0.2), dizziness frequency (P=0.09), HRA (P=0.1) and neck pain (P=0.3). At 1-year follow-up, the between-group analysis identified statistically significant differences for all of the measured variables including anterior head translation (2.4 cm [-2.3;-1.8], P<0.0005), cervical lordosis (-14.4° [-11.6;-8.3], P<0.0005), dizziness handicap inventory (29.9 [-34.4;-29.9], P<0.0005), severity of dizziness (5.4 [-5.9;-4.9], P<0.0005), dizziness frequency (2.6 [-3.1;-2.5], P<0.0005), HRA for right rotation (2.8 [-3.9;-3.3], P<0.005), HRA for left rotation (3.1 [-3.5;-3.4, P<0.0005], neck pain (4.97 [-5.3;-4.3], P<0.0005); indicating greater improvements in the experimental group. The addition of Denneroll™ cervical extension traction to a multimodal program positively affected pain, cervicocephalic kinesthetic sensibility, dizziness management outcomes at long-term follow-up. Appropriate physical therapy rehabilitation for cervicogenic dizziness should include structural rehabilitation of the cervical spine (lordosis and head posture correction), as it might to lead greater and longer lasting improved function.

An evaluation of the Well at Dell health management program: health risk change and financial return on investment.

PubMed

Musich, Shirley; McCalister, Tre'; Wang, Sara; Hawkins, Kevin

2015-01-01

To investigate the effectiveness of the Well at Dell comprehensive health management program in delivering health care and productivity cost savings relative to program investment (i.e., return on investment). A quasi-experimental design was used to quantify the financial impact of the program and nonexperimental pre-post design to evaluate change in health risks. Ongoing worksite health management program implemented across multiple U.S. locations. Subjects were 24,651 employees with continuous medical enrollment in 2010-2011 who were eligible for 2011 health management programming. Incentive-driven, outcomes-based multicomponent corporate health management program including health risk appraisal (HRA)/wellness, lifestyle management, and disease management coaching programs. Medical, pharmacy, and short-term disability pre/post expenditure trends adjusted for demographics, health status, and baseline costs. Self-reported health risks from repeat HRA completers. Analysis: Propensity score-weighted and multivariate regression-adjusted comparison of baseline to post trends in health care expenditures and productivity costs for program participants and nonparticipants (i.e., difference in difference) relative to programmatic investment. The Well at Dell program achieved an overall return on investment of 2.48 in 2011. Most of the savings were realized from the HRA/wellness component of the program. Cost savings were supported with high participation and significant health risk improvement. An incentive-driven, well-managed comprehensive corporate health management program can continue to achieve significant health improvement while promoting health care and productivity cost savings in an employee population.

Atypical Hemispheric Specialization for Faces in Infants At-Risk for Autism Spectrum Disorder

PubMed Central

Keehn, Brandon; Vogel-Farley, Vanessa; Tager-Flusberg, Helen; Nelson, Charles A.

2014-01-01

Behavioral and neuroimaging findings from typically developing infants and children have demonstrated that the right hemisphere becomes specialized for processing faces. Face processing impairments and atypical hemispheric specialization have previously been reported in individuals with autism spectrum disorder (ASD). The goal of this study was to examine the emergence of the right-lateralized face processing network in infants at high-risk for autism (HRA; defined as having an older sibling with ASD) and low-risk comparison (LRC) infants, defined as having no family history of ASD. To investigate the earliest appearance of these features, we examined lateralization of event-related gamma-band coherence (a measure of intra-hemispheric connectivity) to faces during the first year of life. Forty-nine HRA and 46 LRC infants contributed a total of 127 data sets at 6- and/or 12-months. EEG was recorded while infants viewed pictures of either their mother or a stranger. Event-related gamma-band (30-50Hz) phase coherence between anterior-posterior regions for left and right hemispheres was computed. HRA infants showed an aberrant pattern of leftward lateralization of intra-hemispheric coherence by the end of the first year of life, suggesting that the network specialized for face processing may develop atypically in these infants. Further, infants with the greatest leftward asymmetry at 12-months were those that later met diagnostic criteria for ASD, providing support to the growing body of evidence that atypical hemispheric specialization may be an early neurobiological marker for ASD. Among the many experimental findings that tend to distinguish those with and without autism spectrum disorder (ASD) are face processing deficits, reduced hemispheric specialization, and atypical neurostructural and functional connectivity. To investigate the earliest manifestations of these features, we examined lateralization of event-related gamma-band coherence to faces during the first year of life in infants at high-risk for autism (HRA; defined as having an older sibling with ASD) who were compared low-risk comparison (LRC) infants, defined as having no family history of ASD. Participants included 49 HRA and 46 LRC infants who contributed a total of 127 data sets at 6- and 12-months. EEG was recorded while infants viewed images of familiar/unfamiliar faces. Event-related gamma-band (30-50Hz) phase coherence between anterior-posterior electrode pairs for left and right hemispheres was computed. Developmental trajectories for lateralization of intra-hemispheric coherence were significantly different in HRA and LRC infants: by 12-months HRA infants showed significantly greater leftward lateralization compared to LRC infants who showed rightward lateralization. Preliminary results indicate that infants who later met criteria for ASD were those that showed the greatest leftward lateralization. HRA infants demonstrate an aberrant pattern of leftward lateralization of intra-hemispheric coherence by the end of the first year of life, suggesting that the network specialized for face processing may develop atypically. Further, infants with the greatest leftward asymmetry at 12-months where those that later met criteria for ASD, providing support to the growing body of evidence that atypical hemispheric specialization may be an early neurobiological marker for ASD. PMID:25808162

Trajectories of Depressive Symptoms Among Web-Based Health Risk Assessment Participants.

PubMed

Bedrosian, Richard; Hawrilenko, Matt; Cole-Lewis, Heather

2017-03-31

Health risk assessments (HRAs), which often screen for depressive symptoms, are administered to millions of employees and health plan members each year. HRA data provide an opportunity to examine longitudinal trends in depressive symptomatology, as researchers have done previously with other populations. The primary research questions were: (1) Can we observe longitudinal trajectories in HRA populations like those observed in other study samples? (2) Do HRA variables, which primarily reflect modifiable health risks, help us to identify predictors associated with these trajectories? (3) Can we make meaningful recommendations for population health management, applicable to HRA participants, based on predictors we identify? This study used growth mixture modeling (GMM) to examine longitudinal trends in depressive symptomatology among 22,963 participants in a Web-based HRA used by US employers and health plans. The HRA assessed modifiable health risks and variables such as stress, sleep, and quality of life. Five classes were identified: A "minimal depression" class (63.91%, 14,676/22,963) whose scores were consistently low across time, a "low risk" class (19.89%, 4568/22,963) whose condition remained subthreshold, a "deteriorating" class (3.15%, 705/22,963) who began at subthreshold but approached severe depression by the end of the study, a "chronic" class (4.71%, 1081/22,963) who remained highly depressed over time, and a "remitting" class (8.42%, 1933/22,963) who had moderate depression to start, but crossed into minimal depression by the end. Among those with subthreshold symptoms, individuals who were male (P<.001) and older (P=.01) were less likely to show symptom deterioration, whereas current depression treatment (P<.001) and surprisingly, higher sleep quality (P<.001) were associated with increased probability of membership in the "deteriorating" class as compared with "low risk." Among participants with greater symptomatology to start, those in the "severe" class tended to be younger than the "remitting" class (P<.001). Lower baseline sleep quality (P<.001), quality of life (P<.001), stress level (P<.001), and current treatment involvement (P<.001) were all predictive of membership in the "severe" class. The trajectories identified were consistent with trends in previous research. The results identified some key predictors: we discuss those that mirror prior studies and offer some hypotheses as to why others did not. The finding that 1 in 5 HRA participants with subthreshold symptoms deteriorated to the point of clinical distress during succeeding years underscores the need to learn more about such individuals. We offer additional recommendations for follow-up research, which should be designed to reflect changes in health plan demographics and HRA delivery platforms. In addition to utilizing additional variables such as cognitive style to refine predictive models, future research could also begin to test the impact of more aggressive outreach strategies aimed at participants who are likely to deteriorate or remain significantly depressed over time. ©Richard Bedrosian, Matt Hawrilenko, Heather Cole-Lewis. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 31.03.2017.

Human Risk Assessment and Its Application to Nanotechnology: A Challenge for Assessors

NASA Astrophysics Data System (ADS)

Emond, C.; Britos, T. N.

2015-05-01

Scientific literature suggests that exposure to nanoparticles (NPs) might be associated with adverse health effects. A well-developed human risk assessment (HRA) that applies to NPs has never been established and optimized-until now. Furthermore, no government regulations are in place that establish what is considered to be an adequate and secure level of exposure and supported by a strong scientific approach for nanotechnology. It is important to implement the HRA to ensure that workers producing NPs, users of NPs and the general population are protected from deleterious issues related to NPs. In this work, a methodology is described based on the HRA. An effort is required during synthesis before the commercialization phase to evaluate the results of a systematic and rigorous assessment because this could significantly reduce the health risks of those exposed to NPs, including workers and the population.

Psychosis proneness and ADHD in young relatives of schizophrenia patients.

PubMed

Keshavan, Matcheri S; Sujata, Mandayam; Mehra, Akhil; Montrose, Debra M; Sweeney, John A

2003-01-01

Symptoms resembling the attentional deficit hyperactivity disorder (ADHD) are frequently observed in young relatives at risk for schizophrenia (HR). We examined the frequency of the ADHD syndrome and its relationship to psychosis related psychopathology and neurobehavioral abnormalities in young HR subjects (n=29) and healthy comparison subjects (HC; n=30). Thirty-one percent of HR subjects (n=9) had ADHD as a lifetime Axis-I diagnosis (HR-A). Compared to healthy comparison subjects, the HR-A group had impaired neurological function. The HR-A group but not the HR subjects without ADHD had higher scores on the Chapman's magical ideation and perceptual aberration scales. Thus, ADHD-like features are more prevalent in the HR population than the one described in the general population and are associated with more frequent psychosis-like clinical features. Longitudinal studies can clarify whether an "ADHD subgroup" within HR subjects predict an increased risk for future emergence of schizophrenia.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herberger, Sarah M.; Boring, Ronald L.

Abstract Objectives: This paper discusses the differences between classical human reliability analysis (HRA) dependence and the full spectrum of probabilistic dependence. Positive influence suggests an error increases the likelihood of subsequent errors or success increases the likelihood of subsequent success. Currently the typical method for dependence in HRA implements the Technique for Human Error Rate Prediction (THERP) positive dependence equations. This assumes that the dependence between two human failure events varies at discrete levels between zero and complete dependence (as defined by THERP). Dependence in THERP does not consistently span dependence values between 0 and 1. In contrast, probabilistic dependencemore » employs Bayes Law, and addresses a continuous range of dependence. Methods: Using the laws of probability, complete dependence and maximum positive dependence do not always agree. Maximum dependence is when two events overlap to their fullest amount. Maximum negative dependence is the smallest amount that two events can overlap. When the minimum probability of two events overlapping is less than independence, negative dependence occurs. For example, negative dependence is when an operator fails to actuate Pump A, thereby increasing his or her chance of actuating Pump B. The initial error actually increases the chance of subsequent success. Results: Comparing THERP and probability theory yields different results in certain scenarios; with the latter addressing negative dependence. Given that most human failure events are rare, the minimum overlap is typically 0. And when the second event is smaller than the first event the max dependence is less than 1, as defined by Bayes Law. As such alternative dependence equations are provided along with a look-up table defining the maximum and maximum negative dependence given the probability of two events. Conclusions: THERP dependence has been used ubiquitously for decades, and has provided approximations of the dependencies between two events. Since its inception, computational abilities have increased exponentially, and alternative approaches that follow the laws of probability dependence need to be implemented. These new approaches need to consider negative dependence and identify when THERP output is not appropriate.« less

Health Risk Management for Bioenvironmental Engineering

DTIC Science & Technology

2013-06-01

success. • Health Risk Estimate ( HRE ). HRE is the probability and severity of loss from exposure to the health threat ( HRE is a function of...probability and severity; when either or both increase the HRE increases). The HRE is also referred to as a health risk level. An HRE is a measure of the...assessments) OEH threats in populations or at locations over time (HRA = f [(health risk) “+” ( HRE ) “+” (COA)]). The HRA “product” is the validated

High-resolution anoscopy: Unchartered territory for gastroenterologists?

PubMed

Albuquerque, Andreia

2015-09-25

High-resolution anoscopy (HRA) is a procedure where patients with an increased risk of anal cancer, like men who have sex with men, human immunodeficiency virus infected individuals, transplant patients and women with a history of lower genital tract neoplasia, with abnormal anal cytology results, are submitted to anal and perianal visualization under magnification. This will allow for a better detection of anal high-grade lesions that can be treated, in an effort to prevent anal cancer. Anal cancer screening follows the same principles that cervical cancer screening. During this procedure, an anoscope is inserted and a colposcope is used to examine systematically the squamocolumnar junction, the transformation zone and the perianal skin. Initially the observation is done with no staining and then with the application of acetic acid and Lugol's iodine solution, allowing for better lesion identification and characterization. Any suspicious lesion seen should be carefully evaluated and biopsied. Without HRA only a small percentage of suspicious lesions are identified. High-grade lesions that are detected can be ablated under HRA. This is a challenging exam to perform, with a long learning curve and the number of clinicians performing it is limited, although the growing number of patients that need to been screened. Specific equipment is required, with these patients ideally been followed by a multidisciplinary team, in a reference centre. HRA remains unfamiliar for many gastroenterologists.

Greater Pupil Size in Response to Emotional Faces as an Early Marker of Social-Communicative Difficulties in Infants at High Risk for Autism

PubMed Central

Wagner, Jennifer B.; Luyster, Rhiannon J.; Tager-Flusberg, Helen; Nelson, Charles A.

2016-01-01

When scanning faces, individuals with autism spectrum disorder (ASD) have shown reduced visual attention (e.g., less time on eyes) and atypical autonomic responses (e.g., heightened arousal). To understand how these differences might explain sub-clinical variability in social functioning, 9-month-olds, with or without a family history of ASD, viewed emotionally-expressive faces, and gaze and pupil diameter (a measure of autonomic activation) were recorded using eye-tracking. Infants at high-risk for ASD with no subsequent clinical diagnosis (HRA-) and low-risk controls (LRC) showed similar face scanning and attention to eyes and mouth. Attention was overall greater to eyes than mouth, but this varied as a function of the emotion presented. HRA- showed significantly larger pupil size than LRC. Correlations between scanning at 9 months, pupil size at 9 months, and 18-month social-communicative behavior, revealed positive associations between pupil size and attention to both face and eyes at 9 months in LRC, and a negative association between 9-month pupil size and 18-month social-communicative behavior in HRA-. The present findings point to heightened autonomic arousal in HRA-. Further, with greater arousal relating to worse social-communicative functioning at 18 months, this work points to a mechanism by which unaffected siblings might develop atypical social behavior. PMID:27616938

Greater Pupil Size in Response to Emotional Faces as an Early Marker of Social-Communicative Difficulties in Infants at High Risk for Autism.

PubMed

Wagner, Jennifer B; Luyster, Rhiannon J; Tager-Flusberg, Helen; Nelson, Charles A

2016-01-01

When scanning faces, individuals with autism spectrum disorder (ASD) have shown reduced visual attention (e.g., less time on eyes) and atypical autonomic responses (e.g., heightened arousal). To understand how these differences might explain sub-clinical variability in social functioning, 9-month-olds, with or without a family history of ASD, viewed emotionally-expressive faces, and gaze and pupil diameter (a measure of autonomic activation) were recorded using eye-tracking. Infants at high-risk for ASD with no subsequent clinical diagnosis (HRA-) and low-risk controls (LRC) showed similar face scanning and attention to eyes and mouth. Attention was overall greater to eyes than mouth, but this varied as a function of the emotion presented. HRA- showed significantly larger pupil size than LRC. Correlations between scanning at 9 months, pupil size at 9 months, and 18-month social-communicative behavior, revealed positive associations between pupil size and attention to both face and eyes at 9 months in LRC, and a negative association between 9-month pupil size and 18-month social-communicative behavior in HRA-. The present findings point to heightened autonomic arousal in HRA-. Further, with greater arousal relating to worse social-communicative functioning at 18 months, this work points to a mechanism by which unaffected siblings might develop atypical social behavior.

Determinants of participation in a web-based health risk assessment and consequences for health promotion programs.

PubMed

Niessen, Maurice A J; Laan, Eva L; Robroek, Suzan J W; Essink-Bot, Marie-Louise; Peek, Niels; Kraaijenhagen, Roderik A; Van Kalken, Coen K; Burdorf, Alex

2013-08-09

The health risk assessment (HRA) is a type of health promotion program frequently offered at the workplace. Insight into the underlying determinants of participation is needed to evaluate and implement these interventions. To analyze whether individual characteristics including demographics, health behavior, self-rated health, and work-related factors are associated with participation and nonparticipation in a Web-based HRA. Determinants of participation and nonparticipation were investigated in a cross-sectional study among individuals employed at five Dutch organizations. Multivariate logistic regression was performed to identify determinants of participation and nonparticipation in the HRA after controlling for organization and all other variables. Of the 8431 employees who were invited, 31.9% (2686/8431) enrolled in the HRA. The online questionnaire was completed by 27.2% (1564/5745) of the nonparticipants. Determinants of participation were some periods of stress at home or work in the preceding year (OR 1.62, 95% CI 1.08-2.42), a decreasing number of weekdays on which at least 30 minutes were spent on moderate to vigorous physical activity (OR(dayPA)0.84, 95% CI 0.79-0.90), and increasing alcohol consumption. Determinants of nonparticipation were less-than-positive self-rated health (poor/very poor vs very good, OR 0.25, 95% CI 0.08-0.81) and tobacco use (at least weekly vs none, OR 0.65, 95% CI 0.46-0.90). This study showed that with regard to isolated health behaviors (insufficient physical activity, excess alcohol consumption, and stress), those who could benefit most from the HRA were more likely to participate. However, tobacco users and those who rated their overall health as less than positive were less likely to participate. A strong communication strategy, with recruitment messages that take reasons for nonparticipation into account, could prove to be an essential tool for organizations trying to reach employees who are less likely to participate.

And the Humans Save the Day or Maybe They Ruin It: The Importance of Humans in the Loop

NASA Technical Reports Server (NTRS)

DeMott, Diana; Boyer, Roger; Bigler, Mark

2017-01-01

Flying a mission in space requires a massive commitment of resources, and without the talent and commitment of the people involved in this effort we would never leave the atmosphere of Earth. When we use the phrase "humans in the loop", it could apply to almost any endeavor since everything starts with humans developing a concept, completing the design process, building or implementing a product and using the product to achieve a goal or purpose. Narrowing the focus to spaceflights, there are a variety of individuals involved throughout the preparations for flight and the flight itself. All of the humans involved add value and support for program success. The purpose of this paper focuses on how a Probabilistic Risk Assessment (PRA) accounts for the human in the loop for potential missions using a technique called Human Reliability Analysis (HRA). Human actions can increase or decrease the overall risk via initiating events or mitigating them, thus removing the human from the loop doesn't always lower the risk.

Associations among psychological distress, high-risk activism, and conflict between ethnic-racial and sexual minority identities in lesbian, gay, bisexual racial/ethnic minority adults.

PubMed

Santos, Carlos E; VanDaalen, Rachel A

2018-03-01

In this brief report, we present results from a study exploring the associations of high-risk activism (HRA) orientation in lesbian, gay, and bisexual (LGB) issues; HRA orientation in racial/ethnic issues; conflicts in allegiances (CIA) between one's ethnic-racial and sexual minority identities; and anxiety among LGB racial/ethnic minority adults. A racially and ethnically diverse sample of 208 LGB racial/ethnic minority adults (age: M = 27.52, SD = 8.76) completed an online survey. Bivariate correlations showed that HRA orientation in LGB and in racial/ethnic issues, as well as CIA, were each positively associated with anxiety. However, regression analyses indicated that CIA moderated the association between anxiety and HRA orientation in LGB issues (but not racial/ethnic minority issues) such that this association was significant and positive at low levels of CIA and nonsignificant at high levels of CIA. These findings can be used to not only inform psychological practice with this population (e.g., by encouraging practitioners to be more attentive to these issues as potential sources of stress), but also more broadly, as knowledge that can inform the burgeoning psychological literature on collective action. We highlight, for example, the importance of distinguishing between types of activism (i.e., high- vs. low-risk types) in relation to mental health outcomes. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Cervical Proprioception in a Young Population Who Spend Long Periods on Mobile Devices: A 2-Group Comparative Observational Study.

PubMed

Portelli, Andrew; Reid, Susan A

2018-02-01

The purpose of this study was to evaluate if young people with insidious-onset neck pain who spend long periods on mobile electronic devices (known as "text neck") have impaired cervical proprioception and if this is related to time on devices. A 2-group comparative observational study was conducted at an Australian university. Twenty-two participants with text neck and 22 asymptomatic controls, all of whom were 18 to 35 years old and spent ≥4 hours per day on unsupported electronic devices, were assessed using the head repositioning accuracy (HRA) test. Differences between groups were calculated using independent sample t-tests, and correlations between neck pain intensity, time on devices, and HRA test were performed using Pearson's bivariate analysis. During cervical flexion, those with text neck (n = 22, mean age ± standard deviation [SD]: 21 ± 4 years, 59% female) had a 3.9° (SD: 1.4°) repositioning error, and the control group (n = 22, 20 ± 1 years, 68% female) had a 2.9° (SD: 1.2°) error. The mean difference was 1° (95% confidence interval: 0-2, P = .02). For other cervical movements, there was no difference between groups. There was a moderately significant correlation (P ≤ .05) between time spent on electronic devices and cervical pain intensity and between cervical pain intensity and HRA during flexion. The participants with text neck had a greater proprioceptive error during cervical flexion compared with controls. This could be related to neck pain and time spent on electronic devices. Copyright © 2018. Published by Elsevier Inc.

Venous Thromboembolism Following Hip and Knee Replacement Arthroplasty in Korea: A Nationwide Study Based on Claims Registry

PubMed Central

2016-01-01

The aim of this study was to examine the incidence and trends of clinically relevant venous thromboembolism (VTE) including deep vein thrombosis (DVT) and pulmonary embolism (PE) after hip and knee replacement arthroplasty (HKRA) in Korea. Between January 1 and December 31, 2010, 22,127 hip replacement arthroplasty (HRA) patients and 52,882 knee replacement arthroplasty (KRA) patients were enrolled in the analysis using the administrative claims database of the Health Insurance Review and Assessment Service (HIRA). All available parameters including procedure history and clinically relevant VTE during the 90 days after HKRA were identified based on diagnostic and electronic data interchange (EDI) codes. The overall incidence of VTE, DVT, and PE during the 90 days was 3.9% (n=853), 2.7% (n=597), and 1.5% (n=327) after HRA, while the incidence was 3.8% (n=1,990), 3.2% (n=1,699), and 0.7% (n=355) after KRA. The incidence of VTE after HKRA was significantly higher in patients who had previous VTE history (odds ratio [OR], 10.8 after HRA, OR, 8.5 after KRA), chronic heart failure (2.1, 1.3), arrhythmia (1.8, 1.7), and atrial fibrillation (3.4, 2.1) than in patients who did not. The VTE incidence in patients with chemoprophylaxis was higher than that in patients without chemoprophylaxis. The incidence of VTEs revealed in this retrospective review was not low compared with the results of the studies targeting other Asian or Caucasian populations. It may warrant routine prevention including employment of chemoprophylaxis. However, the limitation of the reviewed data mandates large scale prospective investigation to affirm this observation. PMID:26770042

Is Educational Attainment Associated with Increased Risk of Mortality in People with Dementia? A Population-based Study.

PubMed

Contador, Israel; Stern, Yaakov; Bermejo-Pareja, Felix; Sanchez-Ferro, Alvaro; Benito-Leon, Julian

2017-01-01

The association between higher education and increased mortality in Alzheimer's disease (AD) is controversial. Further it is unknown whether education predicts survival in all dementia subtypes. We assessed mortality rates and death causes of persons with dementia compared to participants without dementia. Participants derive from the Neurological Disorders in Central Spain, a prospective population- based cohort study of older adults. We compared 269 persons with dementia to 2944 participants without dementia. We carried out Cox regression models to predict the risk of mortality dependent on the educational attainment adjusting for covariates. Reasons of death were obtained from the National Population Register. During a median follow-up of 5.4 years, 400 individuals died (171 with dementia, 229 without dementia). Among the participants with dementia, those with higher educational attainment had an increased risk of death than those with lower education; the adjusted hazard ratio (HRa) was 1.40 (95% confidence interval [CI], 1.01 to 1.94). When the analysis was restricted to patients with AD the HRa increased to 1.51 (95% CI = 1.01-2.24). By contrast, educational attainment was not associated with increased mortality among participants without dementia (HRa = 0.92, 95% CI = 0.71-1.20, p = 0.55), whereas education did not influence mortality in QD. Our findings suggest that high educational attainment is associated with increased mortality risk in people with dementia. This observation implies that neuropathology is more advanced in patients with higher education at any level of clinical severity, leading these individuals to an earlier death after diagnosis. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Uncertainty analysis in geospatial merit matrix–based hydropower resource assessment

DOE PAGES

Pasha, M. Fayzul K.; Yeasmin, Dilruba; Saetern, Sen; ...

2016-03-30

Hydraulic head and mean annual streamflow, two main input parameters in hydropower resource assessment, are not measured at every point along the stream. Translation and interpolation are used to derive these parameters, resulting in uncertainties. This study estimates the uncertainties and their effects on model output parameters: the total potential power and the number of potential locations (stream-reach). These parameters are quantified through Monte Carlo Simulation (MCS) linking with a geospatial merit matrix based hydropower resource assessment (GMM-HRA) Model. The methodology is applied to flat, mild, and steep terrains. Results show that the uncertainty associated with the hydraulic head ismore » within 20% for mild and steep terrains, and the uncertainty associated with streamflow is around 16% for all three terrains. Output uncertainty increases as input uncertainty increases. However, output uncertainty is around 10% to 20% of the input uncertainty, demonstrating the robustness of the GMM-HRA model. Hydraulic head is more sensitive to output parameters in steep terrain than in flat and mild terrains. Furthermore, mean annual streamflow is more sensitive to output parameters in flat terrain.« less

Fundus autofluorescence findings in central serous chorioretinopathy using two different confocal scanning laser ophthalmoscopes: correlation with functional and structural status.

PubMed

Shin, Joo Youn; Choi, Hun Jin; Lee, Jonghyun; Choi, Moonjung; Chung, Byunghoon; Byeon, Suk Ho

2016-08-01

To compare autofluorescence (AF) findings using wide-field (Optomap) and conventional (HRA-AF) confocal scanning laser ophthalmoscopy (cSLO) systems in patients with central serous chorioretinopathy (CSC), and to investigate the correlations between AF findings and functional and anatomical status. Optical coherence tomography (OCT) and AF images were compared in 73 eyes with serous retinal detachment (SRD) (group A) and 30 eyes without SRD (group B). We evaluated AF findings from the SRD region, atrophic area, and foveola. Correlations between AF findings and outer retinal abnormalities in OCT and visual acuity (VA) were analyzed. Optomap-AF was more effective than HRA-AF in identifying the margins of a detached area (P = 0.001) in group A, and for monitoring mild outer retinal damage (P = 0.041) in group B. The foveolar AF grades in both instruments were significantly correlated with VA and central foveal thickness (CFT) in both group A (Optomap, VA r s = 0.33, P = 0.012; CFT r s = -0.38, P = 0.002; HRA, VA r s = 0.62, P < 0.001; CFT r s = -0.70, P < 0.001) and group B (Optomap, VA r s = 0.71, P < 0.001, CFT r s = -0.78, P < 0.001; HRA, VA r s = 0.40, P = 0.026, CFT r s = -0.40, P = 0.030). Optomap-AF was found to be advantageous for monitoring subretinal status in eyes with SRD, and more accurately reflected mild outer retinal changes in eyes without SRD. Foveolar AF grades of both imaging modalities were significantly correlated with functional and anatomical status.

The role of oncogenic human papillomavirus determination for diagnosis of high-grade anal intraepithelial neoplasia in HIV-infected MSM.

PubMed

Burgos, Joaquin; Hernández-Losa, Javier; Landolfi, Stefania; Guelar, Ana; Dinares, MªCarmen; Villar, Judith; Navarro, Jordi; Ribera, Esteve; Falcó, Vicenç; Curran, Adria

2017-10-23

To assess the oncogenic human papillomavirus (HPV) determination and the cotesting HPV and anal cytology value to detect high-grade anal intraepithelial neoplasia (HGAIN) in a cohort of HIV-MSM. Prospective study of HIV-infected MSM who underwent screening for anal dysplasia. Screening program includes anal cytology, HPV testing, and high-resolution anoscopy (HRA) at each visit. Histological samples were obtained if suspicious lesions were revealed by HRA. Sensitivity and specificity of the different tests were calculated by using histological results of HRA-guided biopsy as the reference test for HGAIN diagnosis. From May 2009 to August 2016, 692 HIV-infected MSM underwent 1827 anal cytologies, 1841 HRA examinations, and 1607 HPV testing. At first screening visit, anal cytology results were abnormal in 418 (60.4%) of 692 patients, and oncogenic HPV genotypes were found in 482 (79.5%) of 606 patients. Anal cytology showed a sensitivity of 89.2% [95% confidence interval (CI); 80.7-94.2] and a specificity of 44.2% (95% CI; 40.2-48.2) to detect HGAIN. Oncogenic HPV testing had 90.4% sensitivity (95% CI; 82-86.8) and 24.4% specificity (95% CI; 20.8-28.3). Cotesting showed a 97.4% sensitivity (95% CI; 91-99.3) and 14% specificity (95% CI; 11.2-17.3). In patients with atypical squamous cells of uncertain significance on cytology, oncogenic HPV testing had 91.3% sensitivity and 28.3% specificity to detect HGAIN. Abnormal cytology and oncogenic HPV determination showed similar sensitivity for detecting HGAIN. The two tests used together improved the sensitivity but with lowered specificity. In our opinion, HPV testing does not improve HGAIN detection and should not replace anal cytology as a standard screening test for HIV-infected MSM.

Improving Adolescent Health Risk Assessment: A Multi-method Pilot Study.

PubMed

Thompson, Lindsay A; Wegman, Martin; Muller, Keith; Eddleton, Katie Z; Muszynski, Michael; Rathore, Mobeen; De Leon, Jessica; Shenkman, Elizabeth A

2016-12-01

Objectives Given poor compliance by providers with adolescent health risk assessment (HRA) in primary care, we describe the development and feasibility of using a health information technology (HIT)-enhanced HRA to improve the frequency of HRAs in diverse clinical settings, asking adolescents' recall of quality of care as a primary outcome. Methods We conducted focus groups and surveys with key stakeholders (Phase I) , including adolescents, clinic staff and providers to design and implement an intervention in a practice-based research network delivering private, comprehensive HRAs via tablet (Phase II). Providers and adolescents received geo-coded community resources according to individualized risks. Following the point-of-care implementation , we collected patient-reported outcomes using post-visit quality surveys (Phase III). Patient-reported outcomes from intervention and comparison clinics were analyzed using a mixed-model, fitted separately for each survey domain. Results Stakeholders agreed upon an HIT-enhanced HRA (Phase I). Twenty-two academic and community practices in north-central Florida then recruited 609 diverse adolescents (14-18 years) during primary care visits over 6 months; (mean patients enrolled = 28; median = 20; range 1-116; Phase II). Adolescents receiving the intervention later reported higher receipt of confidential/private care and counseling related to emotions and relationships (adjusted scores 0.42 vs 0.08 out of 1.0, p < .01; 0.85 vs 0.57, p < .001, respectively, Phase III) than those receiving usual care. Both are important quality indicators for adolescent well-child visits. Conclusions Stakeholder input was critical to the acceptability of the HIT-enhanced HRA. Patient recruitment data indicate that the intervention was feasible in a variety of clinical settings and the pilot evaluation data indicate that the intervention may improve adolescents' perceptions of high quality care.

Factors Associated with High-Grade Anal Intraepithelial Lesion in HIV-Positive Men in a Southern U.S. City.

PubMed

Frank, Melanie; Lahiri, Cecile D; Nguyen, Minh Ly; Mehta, Cyra Christina; Mosunjac, Marina; Flowers, Lisa

2018-05-02

The incidence of anal cancer is increased in HIV-infected patients compared with the general population. Risk factors associated with the anal cancer precursor, high-grade squamous intraepithelial lesion (HSIL), have not been extensively studied in an urban black population with late-stage HIV disease. We performed a retrospective chart review of HIV-infected men at the Grady Ponce de Leon Center HIV Clinic (Atlanta, GA) referred for high-resolution anoscopy (HRA), a procedure where anal tissue is examined under magnification and abnormal areas are biopsied. Between December 2013 and September 2015, 147 men underwent HRA: 72% were black, and 94% were men who have sex with men. CD4 count closest to time of HRA was a median 325 cells/mm 3 (interquartile range 203-473), and 69% had an undetectable HIV viral load. Ninety-four percent had abnormal anal cytology [80% atypical squamous cells of undetermined significance/low-grade squamous intraepithelial lesion (LSIL) and 20% atypical squamous cells, cannot exclude HSIL/HSIL], and 97% had abnormal histology (35% LSIL, 65% HSIL). Statistically significant variables associated with HSIL included number of biopsies [odds ratio (OR) 1.55, 95% confidence interval (CI) 1.13-2.14] and having ≥1 high-grade anal cytology in the last 12 months (OR 3.76, 95% CI 1.38-10.23). No significant association was found between HSIL and CD4, HIV viral load, or recent sexually transmitted infection. In this population, the burden of anal HSIL was extremely high, regardless of most recent anal cytology result. In newly diagnosed HIV-infected men with no history of anal cancer screening, performing HRA as primary anal cancer screening instead of cytology appears to be a viable option.

And the Human Saves the Day or Maybe They Ruin It, The Importance of Humans in the Loop

NASA Technical Reports Server (NTRS)

DeMott, Diana L.; Boyer, Roger L.

2017-01-01

Flying a mission in space requires a massive commitment of resources, and without the talent and commitment of the people involved in this effort we would never leave the atmosphere of Earth as safely as we have. When we use the phrase "humans in the loop", it could apply to almost any endeavor since everything starts with humans developing a concept, completing the design process, building or implementing a product and using the product to achieve a goal or purpose. Narrowing the focus to spaceflight, there are a variety of individuals involved throughout the preparations for flight and the flight itself. All of the humans involved add value and support for program success. The paper discusses the concepts of human involvement in technological programs, how a Probabilistic Risk Assessment (PRA) accounts for the human in the loop for potential missions using a technique called Human Reliability Analysis (HRA) and the tradeoffs between having a human in the loop or not. Human actions can increase or decrease the overall risk via initiating events or mitigating them, thus removing the human from the loop doesn't always lowers the risk.

The role of health-risk appraisals in disease management.

PubMed

Hudson, Laurel R; Pope, James E

2006-02-01

Managed care organizations and disease management vendors often find themselves in the position of responding to employers who want to administer a health-risk appraisal (HRA) without committing to implementation of a comprehensive health promotion program. The assumption appears to be that information on health risks is sufficient to motivate employees to change their health behaviors in order to reduce estimated health risks. A review of the relevant literature does not substantiate the efficacy of a stand-alone HRA for motivating behavior change. The challenge is to engage employers in informed conversations on what works in health promotion and achieve cost-effective benefits.

Hybrid employment recommendation algorithm based on Spark

NASA Astrophysics Data System (ADS)

Li, Zuoquan; Lin, Yubei; Zhang, Xingming

2017-08-01

Aiming at the real-time application of collaborative filtering employment recommendation algorithm (CF), a clustering collaborative filtering recommendation algorithm (CCF) is developed, which applies hierarchical clustering to CF and narrows the query range of neighbour items. In addition, to solve the cold-start problem of content-based recommendation algorithm (CB), a content-based algorithm with users’ information (CBUI) is introduced for job recommendation. Furthermore, a hybrid recommendation algorithm (HRA) which combines CCF and CBUI algorithms is proposed, and implemented on Spark platform. The experimental results show that HRA can overcome the problems of cold start and data sparsity, and achieve good recommendation accuracy and scalability for employment recommendation.

Comparison of 4 recruiting strategies in a smoking cessation trial.

PubMed

Buller, David B; Meenan, Richard; Severson, Herb; Halperin, Abigail; Edwards, Erika; Magnusson, Brooke

2012-09-01

To compare 4 online and off-line recruiting methods. Young adult smokers (n=3353) were recruited to a trial comparing smoking cessation services with an online health risk assessment (HRA), online ads, offline materials, and quit-line screening. Online ads (n=1426; $41.35) and off-line materials recruited the most smokers (n=1341; $56.23) for the lowest cost. Quitline screening was more expensive (n=189; $132.22), but enrollees used cessation services the most (34%-82%). Online HRA was least successful and most costly (n=397; $630.85) but had the highest follow-up (45%-55%). Online ads and off-line materials were most effective and cost-effective methods.

Evaluation of a New Scoring System for Retinal Nerve Fiber Layer Photography Using HRA1 in 964 Eyes

PubMed Central

Hong, Samin; Moon, Jong Wook; Ha, Seung Joo; Kim, Chan Yun; Seong, Gong Je

2007-01-01

Purpose To evaluate retinal nerve fiber layer (RNFL) defect by a new scoring system for RNFL photography using the Heidelberg Retina Angiograph 1 (HRA1). Methods This retrospective study included 128 healthy eyes and 836 primary open-angle glaucoma eyes. The RNFL photography using HRA1 was interpreted using a new scoring system, and correlated with visual field indices of standard automated perimetry (SAP). Using the presence of RNFL defect, darkness, width, and location, we established the new scoring system of RNFL photos. Results The mean RNFL defect score I in the early, moderate, severe, and control groups were 7.3, 9.2, 10.4, and 3.6, respectively. The mean RNFL defect score II in the early, moderate, severe, and control groups were 14.5, 28.5, 43.4, and 3.4, respectively. Correlations between the RNFL defect score II and the mean deviation of SAP was the strongest of the various combinations (r=-0.675, P<.001). Conclusions Using a new scoring system, we propose a method for semi-quantitative interpretation of RNFL photographs. This scoring system may be helpful to distinguish between normal and glaucomatous eyes, and the score is associated with the severity of visual field loss. PMID:18063886

Atypical lateralization of ERP response to native and non-native speech in infants at risk for autism spectrum disorder.

PubMed

Seery, Anne M; Vogel-Farley, Vanessa; Tager-Flusberg, Helen; Nelson, Charles A

2013-07-01

Language impairment is common in autism spectrum disorders (ASD) and is often accompanied by atypical neural lateralization. However, it is unclear when in development language impairment or atypical lateralization first emerges. To address these questions, we recorded event-related-potentials (ERPs) to native and non-native speech contrasts longitudinally in infants at risk for ASD (HRA) over the first year of life to determine whether atypical lateralization is present as an endophenotype early in development and whether these infants show delay in a very basic precursor of language acquisition: phonemic perceptual narrowing. ERP response for the HRA group to a non-native speech contrast revealed a trajectory of perceptual narrowing similar to a group of low-risk controls (LRC), suggesting that phonemic perceptual narrowing does not appear to be delayed in these high-risk infants. In contrast there were significant group differences in the development of lateralized ERP response to speech: between 6 and 12 months the LRC group displayed a lateralized response to the speech sounds, while the HRA group failed to display this pattern. We suggest the possibility that atypical lateralization to speech may be an ASD endophenotype over the first year of life. Copyright © 2012 Elsevier Ltd. All rights reserved.

The effect of atrial pacing site on electrophysiological properties of the atrioventricular junction and induction of atrioventricular nodal reentry in patients with typical atrioventricular nodal reentrant tachycardia.

PubMed

Kiedrowicz, Radosław M; Kaźmierczak, Jarosław; Wielusiński, Maciej

2017-01-01

Clinical studies in humans have shown the site of atrial stimulation to influence atrioventricular (AV) conduction times and refractory periods, the demonstration of dual AV nodal (AVN) pathways, and induction of AVN reentry. These studies often found conflicting results. Moreover, among enrolled patients a minority of them were found to have AVN reentrant tachycardia (AVNRT). The purpose of this study was to investigate the effect of right and left atrial pacing on the electrophysiological properties of the AV junction in the typical AVNRT population. Ninety-two consecutive patients with typical AVNRT were included. Atrial pacing was performed from the high right atrium (HRA) and the left atrium via the proximal coronary sinus (CS). Stimulation from either the HRA or the CS could result in dual AVN physiology and AVNRT. No site-dependent differences in the ease of induction of dual AVN pathways with variability of initiation from either site were found. However, AVNRT was easier to induce from the HRA. With CS pacing the leftward but not the rightward AVN approaches were the entry point to the AV node because of significantly shorter AH conduction times compared to HRA pacing. Conduction over the leftward AVN extensions could initiate the tachycardia with significantly shorter critical AH interval compared to conduction over the rightward AVN extensions; however, the AH interval during AVNRT and its cycle length were not significantly different. Rightward and leftward AVN extensions are regular features of the AV node. Their different electrophysiological properties lead to variation in the demonstration of discontinuous AVN conduction and AVNRT during right and left atrial pacing. Despite the observation that the left AVN extensions could compose the entry point to the reentrant circuit, there is no evidence that they constitute the critical component of sustained typical AVNRT.

The Effects of Non-Contingent Feedback on the Incidence of Plateau at V̇O2max.

PubMed

Gordon, Dan; Gernigon, Marie; Baker, James; Merzbach, Viviane; Scruton, Adrian

2017-03-01

The purpose of this study was to examine the effects of non-contingent feedback in the form of heart rate (HR) on the incidence of plateau at V̇O 2max . Ten physically active males (age 24.8 yrs ± 4.2; mass 81.4 ± 9.0 kg; stature 1.80 ± 0.11 m, V̇O 2max 53.2 ± 5.8 ml·kg -1. min -1 ) who were V̇O 2max testing naïve but were cognisant as to the heart rate responses to exercise completed four incremental tests to volitional exhaustion, separated by ~72 h for the determination of V̇O 2max and gas exchange threshold. The first trial served as a familiarisation with the remaining three being experimental conditions where HR was presented in a screen projection as either the actual response (HR-A) or 10 b·min -1 higher than recorded (HR-H) or 10 b·min -1 lower (HR-L). Throughout all trials V̇O 2 was recorded on a breath-by-breath basis with plateau criteria of ≤ 50 ml·min -1 . A significant difference was observed for Δ V̇O 2 over the final two consecutive 30s sampling periods between HR-A, both HR-L and HR-H (p = 0.049) and for the incidence of plateau response between condition (p = 0.021). An additional significant difference was observed for sub-maximal Δ V̇O 2 responses between HR-A and HR-H (p = 0.049) and HR-A and HR-L (p = 0.006). Non-significant differences were observed for all other criteria. These data indicate that when presented with non-contingent feedback in the form of HR, that the perceptually orientated pacing schema becomes disrupted promoting a sparing of the finite anaerobic capacity to compensate for the imbalance between the afferent signal and perception of effort.

Central serous chorioretinopathy fundus autofluorescence comparison with two different confocal scanning laser ophthalmoscopes.

PubMed

Nam, Ki Tae; Yun, Cheol Min; Kim, Jee Taek; Yang, Kyung-Sook; Kim, Hyun Joo; Kim, Seong-Woo; Oh, Jaeryung; Huh, Kuhl

2015-12-01

To compare the lesion characteristics of two different types of confocal scanning laser ophthalmoscopy (cSLO) autofluorescence (AF) images in central serous chorioretinopathy (CSC). The study included 63 eyes of 61 patients; 63 pairs of fundus autofluorescence (FAF) images were compared before CSC resolution in 63 eyes, FAF images of 31 eyes were also compared after CSC resolution. The lesion characteristics (brightness and composite pattern) were compared between Heidelberg Retina Angiograph 2 (HRA2; Heidelberg Engineering, Germany) and Optomap Tx (Optomap; Optos, Scotland) FAF images. The lesion composite pattern was categorized as diffuse or granular. Diffuse AF was defined as homogenously increased or decreased AF, and granular AF was defined as dot-like, coarse changes in AF. The mean disease duration and subretinal fluid (SRF) height in the spectral domain optical coherence tomography were compared according to the FAF image characteristics. Lesion brightness before CSC resolution was hypo-AF in 48 eyes (76.2 %), hyper-AF in three (4.8 %), and mixed-AF in 12 (19.0 %) in HRA2 FAF images. In comparison, nine (14.3 %) images were hypo-AF, 44 (69.8 %) were hyper-AF, and 10 (15.9 %) were mixed-AF in Optomap FAF images (P < 0.0001). There was no significant difference in lesion composite pattern between the two FAF image wavelengths. Patients with lesions that were hyper-AF in Optomap FAF and hypo-AF in HRA2 FAF had a shorter disease duration and greater SRF height (1 month, 281 um) than those who were hyper-AF in both Optomap and HRA2 images (26 months, 153 um; P = 0.004, 0.001). The two types of FAF images of CSC showed different lesion brightness before and after CSC resolution but demonstrated similar lesion composite patterns.

Do Complication Rates Differ by Gender After Metal-on-metal Hip Resurfacing Arthroplasty? A Systematic Review.

PubMed

Haughom, Bryan D; Erickson, Brandon J; Hellman, Michael D; Jacobs, Joshua J

2015-08-01

Although metal-on-metal (MoM) bearing surfaces provide low rates of volumetric wear and increased stability, evidence suggests that certain MoM hip arthroplasties have high rates of complication and failure. Some evidence indicates that women have higher rates of failure compared with men; however, the orthopaedic literature as a whole has poorly reported such complications stratified by gender. This systematic review aimed to: (1) compare the rate of adverse local tissue reaction (ALTR); (2) dislocation; (3) aseptic loosening; and (4) revision between men and women undergoing primary MoM hip resurfacing arthroplasty (HRA). Systematic MEDLINE and EMBASE searches identified all level I to III articles published in peer-reviewed journals, reporting on the outcomes of interest, for MoM HRA. Articles were limited to those with 2-year followup that reported outcomes by gender. Ten articles met inclusion criteria. Study quality was evaluated using the Modified Coleman Methodology Score; the overall quality was poor. Heterogeneity and bias were analyzed using a Mantel-Haenszel statistical method. Women demonstrated an increased odds of developing ALTR (odds ratio [OR], 5.70 [2.71-11.98]; p<0.001), dislocation (OR, 3.04 [1.2-7.5], p=0.02), aseptic loosening (OR, 3.18 [2.21-4.58], p<0.001), and revision (OR, 2.50 [2.25-2.78], p<0.001) after primary MoM HRA. A systematic review of the currently available literature reveals a higher rate of complications (ALTR, dislocation, aseptic loosening, and revision) after MoM HRA in women compared with men. Although femoral head size has been frequently implicated as a prime factor in the higher rate of complication in women, further research is necessary to specifically probe this relationship. Retrospective studies of data available (eg, registry data) should be undertaken, and moving forward studies should report outcomes by gender (particularly complications). Level III, therapeutic study.

Comparison of Four Recruiting Strategies in a Smoking Cessation Trial

PubMed Central

Buller, David B.; Meenan, Richard; Severson, Herb; Halperin, Abigail; Edwards, Erika; Magnusson, Brooke

2012-01-01

Objectives To compare 4 on-line and off-line recruiting methods. Methods Young adult smokers (n=3353) were recruited to a trial comparing smoking cessation services with an on-line health risk assessment (HRA), on-line ads, off-line materials, and quit line screening. Results On-line ads (n=1426; $41.35) and off-line materials recruited the most smokers (n=1341; $56.23) for the lowest cost. Quit line screening was more expensive (n=189; $133.61), but enrollees used cessation services the most (34%-82%). On-line HRA was least successful and most costly (n=397; $630.85) but had the highest follow-up (45%-55%). Conclusions On-line ads and off-line materials were most effective and cost-effective methods. PMID:22584086

Risk Assessment of Potentially Toxic Elements (PTEs) Pollution at a Rural Industrial Wasteland in an Abandoned Metallurgy Factory in North China

PubMed Central

Chen, Jiajun

2018-01-01

The potential toxic elements (PTEs) pollution problems in many rural industrial wastelands have been observed to be conspicuous. Therefore, 40 top soil samples were collected from the wasteland of a typical rural metallurgy factory in Baoding, China. The total concentrations of six key PTEs were measured. The soil properties and speciation of the PTEs were also identified. Extremely high concentrations of As, Cd, Pb, and Zn were observed in the surface soils. Using the PTEs concentration in the top soils of the rural industrial wasteland, the following indices of pollution were calculated: the pollution load index (PLI), the geo-accumulation Index (Igeo), the risk assessment code (RAC), and the health risk assessment (HRA). The analysis of the PLI and Igeo indicated that site #1 was relatively clean, while sites #2 and #3 were heavily polluted. The results of the RAC showed that PTEs in top soils at sites #2 and #3 were significantly increased (p  <  0.05) for Cd and Zn. The HRA indicated that both As and Pb presented non-carcinogenic risks to children and adults at sites #2 and #3. Our findings can be a reference for risk prevention of industrially abandoned land in rural China. PMID:29316642

Risk Assessment of Potentially Toxic Elements (PTEs) Pollution at a Rural Industrial Wasteland in an Abandoned Metallurgy Factory in North China.

PubMed

Sun, Zheng; Chen, Jiajun

2018-01-06

The potential toxic elements (PTEs) pollution problems in many rural industrial wastelands have been observed to be conspicuous. Therefore, 40 top soil samples were collected from the wasteland of a typical rural metallurgy factory in Baoding, China. The total concentrations of six key PTEs were measured. The soil properties and speciation of the PTEs were also identified. Extremely high concentrations of As, Cd, Pb, and Zn were observed in the surface soils. Using the PTEs concentration in the top soils of the rural industrial wasteland, the following indices of pollution were calculated: the pollution load index (PLI), the geo-accumulation Index (I geo ), the risk assessment code (RAC), and the health risk assessment (HRA). The analysis of the PLI and I geo indicated that site #1 was relatively clean, while sites #2 and #3 were heavily polluted. The results of the RAC showed that PTEs in top soils at sites #2 and #3 were significantly increased ( p <  0.05) for Cd and Zn. The HRA indicated that both As and Pb presented non-carcinogenic risks to children and adults at sites #2 and #3. Our findings can be a reference for risk prevention of industrially abandoned land in rural China.

The association of corporate work environment factors, health risks, and medical conditions with presenteeism among Australian employees.

PubMed

Musich, Shirley; Hook, Dan; Baaner, Stephanie; Spooner, Michelle; Edington, Dee W

2006-01-01

To investigate the impact of selected corporate environment factors, health risks, and medical conditions on job performance using a self-reported measure of presenteeism. A cross-sectional survey utilizing health risk appraisal (HRA) data merging presenteeism with corporate environment factors, health risks, and medical conditions. Approximately 8000 employees across ten diverse Australian corporations. Employees (N = 1523; participation rate, 19%) who completed an HRA questionnaire. Self-reported HRA data were used to test associations of defined adverse corporate environment factors with presenteeism. Stepwise multivariate logistic regression modeling assessed the relative associations of corporate environment factors, health risks, and medical conditions with increased odds of any presenteeism. Increased presenteeism was significantly associated with poor working conditions, ineffective management/leadership, and work/life imbalance (adjusting for age, gender, health risks, and medical conditions). In multivariate logistic regression models, work/life imbalance, poor working conditions, life dissatisfaction, high stress, back pain, allergies, and younger age were significantly associated with presenteeism. Although the study has some limitations, including a possible response bias caused by the relatively low participation rate across the corporations, the study does demonstrate significant associations between corporate environment factors, health risks, and medical conditions and self-reported presenteeism. The study provides initial evidence that health management programming may benefit on-the-job productivity outcomes if expanded to include interventions targeting work environments.

Brillouin Light Scattering study of the rotatable magnetic anisotropy in exchange biased bilayers of Ni81 Fe19 Ir20 Mn80

NASA Astrophysics Data System (ADS)

Rodríguez, Roberto; Oliveira, Alexandre; Estrada, Francisco; Santos, Obed; Azevedo, Antonio; Rezende, Sergio

It is known that when a ferromagnet (FM) is in atomic contact with an antiferromagnet (AF) the exchange coupling between the FM and AF spins at the interface induces a unidirectional anisotropy in the ferromagnetic film. This effect is known as exchange bias (EB). Despite the large amount of research on this topic there are still several aspects of the EB mechanism that are not well understood. One of this aspects is the origin of the rotatable anisotropy in polycrystalline AFs. By means of Brillouin Light Scattering (BLS) measurements, we investigated the dependence of the rotatable anisotropy field HRA and exchange field HE with the magnitude of the external magnetic field (Ho) in FM/AM bilayers of Ni81Fe19(10nm)/Ir20Mn80(tAF) . We developed an algorithm to numerically fit the in-plane angular dependence of the magnon frequency, at a fixed value of Ho measured by BLS. From the fit parameters we were able to investigate HRA and HE dependency on Ho. The results reveal that HRA value depends on Ho, so we argue that AF grain distribution at the interface is partially modified by the applied field strength. Contrary to this, the relation between HE and Ho is not straightforward, remaining constant at high values of Ho.

Lateralization of ERPs to speech and handedness in the early development of Autism Spectrum Disorder.

PubMed

Finch, Kayla H; Seery, Anne M; Talbott, Meagan R; Nelson, Charles A; Tager-Flusberg, Helen

2017-01-01

Language is a highly lateralized function, with typically developing individuals showing left hemispheric specialization. Individuals with autism spectrum disorder (ASD) often show reduced or reversed hemispheric lateralization in response to language. However, it is unclear when this difference emerges and whether or not it can serve as an early ASD biomarker. Additionally, atypical language lateralization is not specific to ASD as it is also seen more frequently in individuals with mixed- and left-handedness. Here, we examined early asymmetry patterns measured through neural responses to speech sounds at 12 months and behavioral observations of handedness at 36 months in children with and without ASD. Three different groups of children participated in the study: low-risk controls (LRC), high risk for ASD (HRA; infants with older sibling with ASD) without ASD, and HRA infants who later receive a diagnosis of ASD (ASD). Event-related potentials (ERPs) to speech sounds were recorded at 12 months. Utilizing a novel observational approach, handedness was measured by hand preference on a variety of behaviors at 36 months. At 12 months, lateralization patterns of ERPs to speech stimuli differed across the groups with the ASD group showing reversed lateralization compared to the LRC group. At 36 months, factor analysis of behavioral observations of hand preferences indicated a one-factor model with medium to high factor loadings. A composite handedness score was derived; no group differences were observed. There was no association between lateralization to speech at 12 months and handedness at 36 months in the LRC and HRA groups. However, children with ASD did show an association such that infants with lateralization patterns more similar to the LRC group at 12 months were stronger right-handers at 36 months. These results highlight early developmental patterns that might be specific to ASD, including a potential early biomarker of reversed lateralization to speech stimuli at 12 months, and a relation between behavioral and neural asymmetries. Future investigations of early asymmetry patterns, especially atypical hemispheric specialization, may be informative in the early identification of ASD.

Genetic polymorphisms of alcohol dehydrogense-1B and aldehyde dehydrogenase-2, alcohol flushing, mean corpuscular volume, and aerodigestive tract neoplasia in Japanese drinkers.

PubMed

Yokoyama, Akira; Mizukami, Takeshi; Yokoyama, Tetsuji

2015-01-01

Genetic polymorphisms of alcohol dehydrogenase-1B (ADH1B) and aldehyde dehydrogenase-2 (ALDH2) modulate exposure levels to ethanol/acetaldehyde. Endoscopic screening of 6,014 Japanese alcoholics yielded high detection rates of esophageal squamous cell carcinoma (SCC; 4.1%) and head and neck SCC (1.0%). The risks of upper aerodigestive tract SCC/dysplasia, especially of multiple SCC/dysplasia, were increased in a multiplicative fashion by the presence of a combination of slow-metabolizing ADH1B*1/*1 and inactive heterozygous ALDH2*1/*2 because of prolonged exposure to higher concentrations of ethanol/acetaldehyde. A questionnaire asking about current and past facial flushing after drinking a glass (≈180 mL) of beer is a reliable tool for detecting the presence of inactive ALDH2. We invented a health-risk appraisal (HRA) model including the flushing questionnaire and drinking, smoking, and dietary habits. Esophageal SCC was detected at a high rate by endoscopic mass-screening in high HRA score persons. A total of 5.0% of 4,879 alcoholics had a history of (4.0%) or newly diagnosed (1.0%) gastric cancer. Their high frequency of a history of gastric cancer is partly explained by gastrectomy being a risk factor for alcoholism because of altered ethanol metabolism, e.g., by blood ethanol level overshooting. The combination of H. pylori-associated atrophic gastritis and ALDH2*1/*2 showed the greatest risk of gastric cancer in alcoholics. High detection rates of advanced colorectal adenoma/carcinoma were found in alcoholics, 15.7% of 744 immunochemical fecal occult blood test (IFOBT)-negative alcoholics and 31.5% of the 393 IFOBT-positive alcoholics. Macrocytosis with an MCV≥106 fl increased the risk of neoplasia in the entire aerodigestive tract of alcoholics, suggesting that poor nutrition as well as ethanol/acetaldehyde exposure plays an important role in neoplasia.

75 FR 22146 - Advisory Committee for Reproductive Health Drugs; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-27

..., 30 milligrams (mg), by Laboratoire HRA Pharma. Ulipristal is an emergency contraceptive for the... suspected contraceptive failure. FDA intends to make background material available to the public no later...

A Coaching by Telephone Intervention for Veterans and Care Team Engagement (ACTIVATE): A study protocol for a Hybrid Type I effectiveness-implementation randomized controlled trial.

PubMed

Oddone, Eugene Z; Damschroder, Laura J; Gierisch, Jennifer; Olsen, Maren; Fagerlin, Angela; Sanders, Linda; Sparks, Jordan; Turner, Marsha; May, Carrie; McCant, Felicia; Curry, David; White-Clark, Courtney; Juntilla, Karen

2017-04-01

A large proportion of deaths and many illnesses can be attributed to three modifiable risk factors: tobacco use, overweight/obesity, and physical inactivity. Health risk assessments (HRAs) are widely available online but have not been consistently used in healthcare systems to activate patients to participate in prevention programs aimed at improving lifestyle behaviors. The goal of this study is to test whether adding telephone-based coaching to use of a comprehensive HRA increases at-risk patients' activation and enrollment into a prevention program compared to HRA use alone. Participants were randomized to either complete an HRA alone or in conjunction with a telephone coaching intervention. To be eligible Veterans had to have at least one modifiable risk factor (current smoker, overweight/obese, or physically inactive). The primary outcome is enrollment and participation in a prevention program by 6months. Secondary outcomes include change in a Patient Activation Measure and Framingham Risk Score. This study is the first to test a web-based health risk assessment coupled with a health coaching intervention within a large healthcare system. Results from this study will help the Veterans Health Administration (VHA) implement its national plan to include comprehensive health risk assessments as a tool to engage Veterans in prevention. The results will also inform health systems outside VHA who seek to implement Medicare's advisement that health risk assessment become a mandatory component of care under the Affordable Care Act. © 2016.

The relationship between modifiable health risks and group-level health care expenditures. Health Enhancement Research Organization (HERO) Research Committee.

PubMed

Anderson, D R; Whitmer, R W; Goetzel, R Z; Ozminkowski, R J; Dunn, R L; Wasserman, J; Serxner, S

2000-01-01

To assess the relationship between modifiable health risks and total health care expenditures for a large employee group. Risk data were collected through voluntary participation in health risk assessment (HRA) and worksite biometric screenings and were linked at the individual level to health care plan enrollment and expenditure data from employers' fee-for-service plans over the 6-year study period. The setting was worksite health promotion programs sponsored by six large private-sector and public-sector employers. Of the 50% of employees who completed the HRA, 46,026 (74.7%) met all inclusion criteria for the analysis. Eleven risk factors (exercise, alcohol use, eating, current and former tobacco use, depression, stress, blood pressure, cholesterol, weight, and blood glucose) were dichotomized into high-risk and lower-risk levels. The association between risks and expenditures was estimated using a two-part regression model, controlling for demographics and other confounders. Risk prevalence data were used to estimate group-level impact of risks on expenditures. Risk factors were associated with 25% of total expenditures. Stress was the most costly factor, with tobacco use, overweight, and lack of exercise also being linked to substantial expenditures. Modifiable risk factors contribute substantially to overall health care expenditures. Health promotion programs that reduce these risks may be beneficial for employers in controlling health care costs.

Effect of Health Risk Assessment and Counselling on Health Behaviour and Survival in Older People: A Pragmatic Randomised Trial

PubMed Central

Stuck, Andreas E.; Moser, André; Morf, Ueli; Wirz, Urban; Wyser, Joseph; Gillmann, Gerhard; Born, Stephan; Zwahlen, Marcel; Iliffe, Steve; Harari, Danielle; Swift, Cameron; Beck, John C.; Egger, Matthias

2015-01-01

Background Potentially avoidable risk factors continue to cause unnecessary disability and premature death in older people. Health risk assessment (HRA), a method successfully used in working-age populations, is a promising method for cost-effective health promotion and preventive care in older individuals, but the long-term effects of this approach are unknown. The objective of this study was to evaluate the effects of an innovative approach to HRA and counselling in older individuals for health behaviours, preventive care, and long-term survival. Methods and Findings This study was a pragmatic, single-centre randomised controlled clinical trial in community-dwelling individuals aged 65 y or older registered with one of 19 primary care physician (PCP) practices in a mixed rural and urban area in Switzerland. From November 2000 to January 2002, 874 participants were randomly allocated to the intervention and 1,410 to usual care. The intervention consisted of HRA based on self-administered questionnaires and individualised computer-generated feedback reports, combined with nurse and PCP counselling over a 2-y period. Primary outcomes were health behaviours and preventive care use at 2 y and all-cause mortality at 8 y. At baseline, participants in the intervention group had a mean ± standard deviation of 6.9 ± 3.7 risk factors (including unfavourable health behaviours, health and functional impairments, and social risk factors) and 4.3 ± 1.8 deficits in recommended preventive care. At 2 y, favourable health behaviours and use of preventive care were more frequent in the intervention than in the control group (based on z-statistics from generalised estimating equation models). For example, 70% compared to 62% were physically active (odds ratio 1.43, 95% CI 1.16–1.77, p = 0.001), and 66% compared to 59% had influenza vaccinations in the past year (odds ratio 1.35, 95% CI 1.09–1.66, p = 0.005). At 8 y, based on an intention-to-treat analysis, the estimated proportion alive was 77.9% in the intervention and 72.8% in the control group, for an absolute mortality difference of 4.9% (95% CI 1.3%–8.5%, p = 0.009; based on z-test for risk difference). The hazard ratio of death comparing intervention with control was 0.79 (95% CI 0.66–0.94, p = 0.009; based on Wald test from Cox regression model), and the number needed to receive the intervention to prevent one death was 21 (95% CI 12–79). The main limitations of the study include the single-site study design, the use of a brief self-administered questionnaire for 2-y outcome data collection, the unavailability of other long-term outcome data (e.g., functional status, nursing home admissions), and the availability of long-term follow-up data on mortality for analysis only in 2014. Conclusions This is the first trial to our knowledge demonstrating that a collaborative care model of HRA in community-dwelling older people not only results in better health behaviours and increased use of recommended preventive care interventions, but also improves survival. The intervention tested in our study may serve as a model of how to implement a relatively low-cost but effective programme of disease prevention and health promotion in older individuals. Trial Registration International Standard Randomized Controlled Trial Number: ISRCTN 28458424 PMID:26479077

Savings account for health care costs

MedlinePlus

... These accounts are approved or regulated by the Internal Revenue Service (IRS). The accounts differ based on how much ... MSA; FSA; HRA References Department of the Treasury - Internal Revenue Service. Health Savings Accounts and Other Tax-Favored Health ...

Mid-term changes in blood metal ion levels after Articular Surface Replacement arthroplasty of the hip.

PubMed

Galea, V P; Laaksonen, I; Matuszak, S J; Connelly, J W; Muratoglu, O; Malchau, H

2017-04-01

Our first aim was to determine whether there are significant changes in the level of metal ions in the blood at mid-term follow-up, in patients with an Articular Surface Replacement (ASR) arthroplasty. Secondly, we sought to identify risk factors for any increases. The study involved 435 patients who underwent unilateral, metal-on-metal (MoM) hip resurfacing (HRA) or total hip arthroplasty (THA). These patients all had one measurement of the level of metal ions in the blood before seven years had passed post-operatively (early evaluation) and one after seven years had passed post-operatively (mid-term evaluation). Changes in ion levels were tested using a Wilcoxon signed-rank test. We identified subgroups at the highest risk of increase using a multivariable linear logistic regression model. There were significant increases in the levels of metal ions for patients who underwent both MoM HRA (Chromium (Cr): 0.5 parts per billion (ppb); Cobalt (Co): 1.1 ppb) and MoM THA (Cr: 0.5 ppb; Co: 0.7 ppb). In a multivariable model considering MoM HRAs, the change in the levels of metal ions was influenced by female gender (Co: Odds Ratio (OR) 1.42; p = 0.002 and Cr: OR 1.08; p = 0.006). The change was found to be irrespective of the initial level for the MoM HRAs, whereas there was a negative relationship between the initial level and the change in the level for those with a MoM THA (Co: OR -0.43; p < 0.001 and Cr: OR -0.14; p = 0.033). The levels of metal ions in the blood increase significantly over the period until mid-term follow-up in patients with both a MoM HRA and those with a MoM THA. We recommend that the levels of metal ions be measured most frequently for women with a MoM HRA. While those with a MoM THA appear to stabilise at a certain level, the accuracy of this trend is not yet clear. Vigilant follow-up is still recommended. Cite this article: Bone Joint J 2017;99-B(4 Supple B):33-40. ©2017 Galea et al.

Acute kidney injury is a powerful independent predictor of mortality in critically ill patients: a multicenter prospective cohort study from Kinshasa, the Democratic Republic of Congo.

PubMed

Masewu, Angèle; Makulo, Jean-Robert; Lepira, François; Amisi, Eric Bibonge; Sumaili, Ernest Kiswaya; Bukabau, Justine; Mokoli, Vieux; Longo, Augustin; Nlandu, Yannick; Engole, Yannick; Ilunga, Cedric; Mosolo, Alphonse; Ngalala, Alex; Kazadi, Justin; Mvuala, Richard; Athombo, Jackson; Aliocha, Nkodila; Akilimali, Pierre Zalagile; Kilembe, Adolphe; Nseka, Nazaire; Jadoul, Michel

2016-08-24

Despite the growing incidence of acute kidney injury (AKI) worldwide, there is little data on the burden and outcomes of AKI in intensive care unit (ICU) in low resource settings. The present study assessed the incidence of AKI and its impact on mortality in ICU in Kinshasa (Democratic Republic of Congo). In a prospective cohort study, 476 consecutive critically ill patients (mean age 52 years, 57 % male) were screened for the presence of AKI in seven ICU from January 1st to March 30th, 2015. Serum creatinine was measured by the enzymatic method (Cobas C111 device®). AKI and its stages (no AKI, AKI 1, AKI 2 and AKI 3) were defined according to AKIN recommendations. The primary outcome was 28 days mortality. Survival (time-to death) curves were built using the Kaplan Meier methods. Predictors of mortality were assessed by Cox proportional hazards regression models. p < 0.05 defined the level of statistical significance. The cumulative incidence of AKI was 52.7 % with AKI stage 1, 2 and 3 in 23.7 %, 16.2 % and 12.8 % of patients, respectively. Among patients who developed AKI, 146 died (58 %) vs 62 patients (28 %) in the group without AKI. Only 6.5 % of the patients with AKI stage 3 benefited from dialysis. Median survival time was 15.0 days in patients without AKI and 3.0 days, 6.0 days and 8.0 days in patients with AKI stage 3, 2 and 1 (p < 0.001), respectively. In addition to respiratory distress-induced polypnea (HRa 1.60; 95 % CI: 1.08-2.37; p = 0.018), oxygen desaturation (HRa 1.53; 95 % CI: 1.13-2.08; p = 0.006) and multi-organic involvement (HRa 1.63; 95 % CI: 1.15-2.30), AKI emerged as an independent predictor of death (HRa 1.82; 95 % CI: 1.34-2.48; p < 0.001). More than half of critically ill patients in the present cohort developed AKI which contributed substantially to short-term mortality, highlighting the need for its prevention, early detection and management as well as the availability of dialysis in ICU.

Office-Based Tools and Primary Care Visit Communication, Length, and Preventive Service Delivery.

PubMed

Lafata, Jennifer Elston; Shay, L Aubree; Brown, Richard; Street, Richard L

2016-04-01

The use of physician office-based tools such as electronic health records (EHRs), health risk appraisal (HRA) instruments, and written patient reminder lists is encouraged to support efficient, high-quality, patient-centered care. We evaluate the association of exam room use of EHRs, HRA instruments, and self-generated written patient reminder lists with patient-physician communication behaviors, recommended preventive health service delivery, and visit length. Observational study of 485 office visits with 64 primary care physicians practicing in a health system serving the Detroit metropolitan area. Study data were obtained from patient surveys, direct observation, office visit audio-recordings, and automated health system records. Outcome measures included visit length in minutes, patient use of active communication behaviors, physician use of supportive talk and partnership-building communication behaviors, and percentage of delivered guideline-recommended preventive health services for which patients are eligible and due. Simultaneous linear regression models were used to evaluate associations between tool use and outcomes. Adjusted models controlled for patient characteristics, physician characteristics, characteristics of the relationship between the patient and physician, and characteristics of the environment in which the visit took place. Prior to adjusting for other factors, visits in which the EHR was used on average were significantly (p < .05) longer (27.6 vs. 23.8 minutes) and contained fewer preventive services for which patients were eligible and due (56.5 percent vs. 62.7 percent) compared to those without EHR use. Patient written reminder lists were also significantly associated with longer visits (30.0 vs. 26.5 minutes), and less use of physician communication behaviors facilitating patient involvement (2.1 vs. 2.6 occurrences), but more use of active patient communication behaviors (4.4 vs. 2.6). Likewise, HRA use was significantly associated with increased preventive services delivery (62.1 percent vs. 57.0 percent). All relationships remained significant (p > .05) in adjusted models with the exception of that between HRA use and preventive service delivery. Office-based tools intended to facilitate the implementation of desired primary care practice redesign are associated with both positive and negative cost and quality outcomes. Findings highlight the need for monitoring both intended and unintended consequences of office-based tools commonly used in primary care practice redesign. © Health Research and Educational Trust.

Heavy metal exposure from cooked rice grain ingestion and its potential health risks to humans from total and bioavailable forms analysis.

PubMed

Praveena, S M; Omar, N A

2017-11-15

Heavy metal in rice studies has attracted a greater concern worldwide. However, there have been limited studies on marketed rice samples although it represents a vital ingestion portion for a real estimation of human health risk. This study was aimed to determine both total and bioaccessible of trace elements and heavy metals (Cd, Cr, Cu, Co, Al, Zn, As, Pb and Fe) in 22 varieties of cooked rice using an inductively coupled plasma-optical emission spectroscopy. Both total and bioaccessible of trace elements and heavy metals were digested using closed-nitric acid digestion and Rijksinstituut voor Volksgezondheid en Milieu (RIVM) in vitro digestion model, respectively. Human health risks via Health Risk Assessment (HRA) were conducted to understand exposure risks involving adults and children representing Malaysian population. Zinc was the highest while As was the lowest contents for total and in their bioavailable forms. Four clusters were identified: (1) Pb, As, Co, Cd and Cr; (2) Cu and Al; (3) Fe and (4) Zn. For HRA, there was no any risks found from single element exposure. While potential carcinogenic health risks present for both adult and children from single As exposure (Life time Cancer Risk, LCR>1×10 -4 ). Total Hazard Quotient values for adult and children were 27.0 and 18.0, respectively while total LCR values for adult and children were 0.0049 and 0.0032, respectively. Copyright © 2017 Elsevier Ltd. All rights reserved.

Prolonged antiretroviral therapy is associated with fewer anal high-grade squamous intraepithelial lesions in HIV-positive MSM in a cross-sectional study.

PubMed

Libois, Agnès; Feoli, Francesco; Nkuize, Marcel; Delforge, Marc; Konopnicki, Deborah; Clumeck, Nathan; De Wit, Stéphane

2017-02-01

HIV-positive men who have sex with men (MSM) are at increased risk of anal cancer. We evaluate the risk factors for anal high-grade squamous intraepithelial lesion (HSIL) (the precursor of anal cancer) in HIV-positive MSM. In this cross-sectional study within a cohort, 320 HIV-positive MSM were screened by anal cytology followed by high-resolution anoscopy (HRA) in case of abnormal cytology. Risk factors for anal HSIL were analysed. Men were mostly middle-aged Caucasians with median CD4+ T lymphocytes of 638 cells/µL, 87% on combined antiretroviral therapy (cART) for a median of 5 years. 198 anal cytology samples were normal. In the 122 patients with abnormal cytology, HRA with biopsies were performed: 12% (n=15) normal, 36% (n=44) anal low-grade squamous intraepithelial lesion (LSIL) and 51% (n=63) anal HSIL. Comparing patients with or without anal HSIL (normal cytology or normal biopsy or LSIL), we found in multivariate analysis significantly fewer anal HSIL in patients with cART ≥24 months (OR 0.32 CI 95% 0.162 to 0.631, p=0.001). Prolonged cART (≥24 months) is associated with fewer anal HSIL. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Regulatory experience of TOPS: an internet-based system to prevent healthy subjects from over-volunteering for UK clinical trials.

PubMed

Allen, C; Francis, G; Martin, J; Boyce, M

2017-12-01

The aim was to review the use of The Over-volunteering Prevention System (TOPS) since the HRA began hosting it in 2013, and the Medicines and Healthcare products Regulatory Agency (MHRA) experience of monitoring its use by UK clinical research units. The HRA searched the TOPS database for the number, type and location of units and the number of entries. The MHRA inspectors reviewed their findings from routine inspections. Twenty-two additional UK units registered to use TOPS during 2013-2016, making a total of 84 units since TOPS was established in 2002. Use of TOPS is now a condition of research ethics committee approval of a phase 1 study and fulfils MHRA accreditation requirements for preventing over-volunteering. The total number of entries by all active units during 2013-2016 was 89,335, of which 84% were UK citizens and 16% non-UK citizens. The total number of entries during 2002-2016 was 249,612. Only 15 of 24,531 subjects (1/1600) and 18 of 18,745 subjects (1/1040) entered in 2015 and 2016, respectively, were deemed potential over-volunteers. The findings continue to support the concept that TOPS not only helps to prevent over-volunteering, but also deters subjects from trying to do so. Regulation of TOPS by the HRA and MHRA has enhanced its effectiveness, benefited all users and helped to improve the safety of volunteers who participate in non-therapeutic trials in the UK. The UK is still the only country with a national database to prevent over-volunteering that has published data on its widespread use and effectiveness.

Adolescent views on comprehensive health risk assessment and counseling: assessing gender differences.

PubMed

Kadivar, Hajar; Thompson, Lindsay; Wegman, Martin; Chisholm, TaJuana; Khan, Maryum; Eddleton, Katie; Muszynski, Michael; Shenkman, Elizabeth

2014-07-01

Adolescence is an important time for the detection of health risk behaviors and factors with subsequent counseling and intervention. Limited research has examined adolescent perceptions of comprehensive health risk assessments (HRAs) and counseling with an assessment of gender differences. Participants were identified using Florida's Medicaid and State Children's Health Insurance Program databases. A total of 35 low-income, racially/ethnically diverse adolescents (ages 14-18 years) participated in eight focus groups stratified by gender. Adolescents completed an internet-based, tablet-administered, comprehensive HRA and then participated in a semi-structured interview. Discussions were recorded, transcribed, and analyzed using a multi-step, team-based approach applying grounded theory to determine major themes. Male adolescents desired less parental involvement, had less understanding of the protections of clinical confidentiality and the need for comprehensive HRA, and placed greater emphasis on the importance of professional appearance. In contrast, more females valued face-to-face interactions and stressed the importance of concern from the health risk assessor. Overall, adolescents placed importance on their relationship with the health risk assessor, and on valuing trust, confidentiality, and nonjudgmental care. Adolescents preferred to complete HRAs in clinical, private, and professional settings, and reported that tablet technology supported their confidentially in completing the HRA. Furthermore, they stressed the importance of autonomy and learning about the health risk outcomes for risk reduction. Gender differences exist in adolescent perceptions of comprehensive HRAs. Adolescent perceptions of HRAs support their use in confidential primary care settings using modalities that emphasize nonjudgmental, private care, and the use of communication techniques that respect adolescents' autonomy to change health risks. Copyright © 2014. Published by Elsevier Inc.

Cardiovascular responses to railway noise during sleep in young and middle-aged adults.

PubMed

Tassi, Patricia; Saremi, Mahnaz; Schimchowitsch, Sarah; Eschenlauer, Arnaud; Rohmer, Odile; Muzet, Alain

2010-03-01

The aim of this study was to investigate the effects of nocturnal railway noise on cardiovascular reactivity in young (25.8 +/- 2.6 years) and middle-aged (52.2 +/- 2.5 years) adults during sleep. Thirty-eight subjects slept three nights in the laboratory at 1-week interval. They were exposed to 48 randomized pass-bys of Freight, Passenger and Automotive trains either at an 8-h equivalent sound level of 40 dBA (Moderate) and 50 dBA (High) or at a silent Control night. Heart rate response (HRR), heart response amplitude (HRA), heart response latency (HRL) and finger pulse response (FPR), finger pulse amplitude (FPA) and finger pulse latency (FPL) were recorded to measure cardiovascular reactivity after each noise onset and for time-matched pseudo-noises in the control condition. Results show that Freight trains produced the highest cardiac response (increased HRR, HRA and HRL) compared to Passenger and Automotive. But the vascular response was similar whatever the type of train. Juniors exhibited an increased HRR and HRA as compared to seniors, but there was no age difference on vasoconstriction, except a shorter FPL in seniors. Noise level produced dose-dependent effects on all the cardiovascular indices. Sleep stage at noise occurrence was ineffective for cardiac response, but FPA was reduced when noise occurred during REM sleep. In conclusion, our study is in favor of an important impact of nocturnal railway noise on the cardiovascular system of sleeping subjects. In the limit of the samples studied, Freight trains are the most harmful, probably more because of their special length (duration) than because of their speed (rise time).

Combined effects of lanthanum (III) chloride and acid rain on photosynthetic parameters in rice.

PubMed

Wang, Lihong; Wang, Wen; Zhou, Qing; Huang, Xiaohua

2014-10-01

Rare earth elements (REEs) pollution and acid rain are environmental issues, and their deleterious effects on plants attract worldwide attention. These two issues exist simultaneously in many regions, especially in some rice-growing areas. However, little is known about the combined effects of REEs and acid rain on plants. Here, the combined effects of lanthanum chloride (LaCl3), one type of REE salt, and acid rain on photosynthesis in rice were investigated. We showed that the combined treatment of 81.6 μM LaCl3 and acid rain at pH 4.5 increased net photosynthetic rate (Pn), stomatic conductance (Gs), intercellular CO2 concentration (Ci), Hill reaction activity (HRA), apparent quantum yield (AQY) and carboxylation efficiency (CE) in rice. The combined treatment of 81.6 μM LaCl3 and acid rain at pH 3.5 began to behave toxic effects on photosynthesis (decreasing Pn, Gs, HRA, AQY and CE, and increasing Ci), and the maximally toxic effects were observed in the combined treatment of 2449.0 μM LaCl3 and acid rain at pH 2.5. Moreover, the combined effects of LaCl3 and acid rain on photosynthesis in rice depended on the growth stage of rice, with the maximal effects occurring at the booting stage. Furthermore, the combined treatment of high-concentration LaCl3 and low-pH acid rain had more serious effects on photosynthesis in rice than LaCl3 or acid rain treatment alone. Finally, the combined effect of LaCl3 and acid rain on Pn in rice resulted from the changes in stomatic (Gs, Ci) and non-stomatic (HRA, AQY and CE) factors. Copyright © 2014 Elsevier Ltd. All rights reserved.

A global, cross cultural study examining the relationship between employee health risk status and work performance metrics.

PubMed

Howarth, Ana; Quesada, Jose; Mills, Peter R

2017-01-01

Health risk assessments (HRA) are used by many organisations as a basis for developing relevant and targeted employee health and well-being interventions. However, many HRA's have a western-centric focus and therefore it is unclear whether the results can be directly extrapolated to those from non-western countries. More information regarding the differences in the associations between country status and health risks is needed along with a more global perspective of employee health risk factors and well-being overall. Therefore we aimed to i) quantify and compare associations for a number of health risk factors based on country status, and then ii) explore which characteristics can aid better prediction of well-being levels and in turn workplace productivity globally. Online employee HRA data collected from 254 multi-national companies, for the years 2013 through 2016 was analysed (n = 117,274). Multiple linear regression models were fitted, adjusting for age and gender, to quantify associations between country status and health risk factors. Separate regression models were used to assess the prediction of well-being measures related to productivity. On average, the developing countries were comprised of younger individuals with lower obesity rates and markedly higher job satisfaction compared to their developed country counterparts. However, they also reported higher levels of anxiety and depression, a greater number of health risks and lower job effectiveness. Assessment of key factors related to productivity found that region of residency was the biggest predictor of presenteeism and poor pain management was the biggest predictor of absenteeism. Clear differences in health risks exist between employees from developed and developing countries and these should be considered when addressing well-being and productivity in the global workforce.

Performance of Sub-Array of ARIANNA Detector Stations during First Year of Operation

NASA Astrophysics Data System (ADS)

Tatar, Joulien Erdintch

The ARIANNA high energy neutrino telescope is designed to search for ultrahigh energy neutrinos produced by the collision of cosmic rays with the cosmic microwave background. ARIANNA exploits the recent development of low noise, low power data acquisition technology to measure the brief radio pulses created by neutrino-induced charged particle showers in the Ross Ice Shelf of Antarctica. Three stations were installed and commissioned in early December 2012 as part of a pilot program to construct a hexagonal array of 7 radio stations. Each station required only 10 Watts of power and operated autonomously using both solar panels and wind generators. In addition, an environmental station was deployed at the ARIANNA site. Data is stored locally and reliably transmitted from Antarctica over high speed wireless internet and Iridium satellite modem during special transmission windows. The wireless internet ceased operation on March 15, corresponding to the fading light condition just before Austral winter. With the aid of wind generation, the stations operated until late May before winter hibernation. Communication was re-established after winter hibernation on September 11, 2013 for three of the four stations. Overall, the stations operated for 65% of the year. The station acquired three types of events: (1) forced, (2) thermal, and (3) signals from an external transmitter, which are called "heartbeat" events. The forced trigger captures the ambient RF conditions at a random snapshot in time. The thermal trigger configuration usually required any 2 of the 4 antenna channels to exceed a voltage level of ˜ 6 · Vrms, where Vrms is the root mean square of the random voltage fluctuations. Individual channel thresholds were adjusted to account for temperature dependences in the electronics. The vast majority of thermal triggers are consistent random gaussian noise expected from thermal processes in the ice and amplifier. Excess power, but no increase is trigger rates, is observed when wind speeds exceed ˜ 6 mph. The frequency components of the excess noise are compatible with noise emitted by the wind generator. There are several periods of impulsive noise with durations of minutes to hours in January and narrowband, suggesting an origin from external transmitters. On one occasion, the noise was contemporaneous with rescue operations at McMurdo Station. Heartbeat events were collected in special runs in 4 separate time periods. They indicate that LPDA coupling to ice medium increased over the first few weeks as the pits with the receiver antennas filled in with snow, and then increased slowly as the snow overburden increased on the transmitting antenna, initially placed flat on the snow surface. We conducted a search for neutrino events in the data from Station 3 between December 6, 2012 and March 13, 2013 by cross-correlating observed waveforms in parallel receiver channels with the expected neutrino template in the time domain. The cross-correlation analysis rejects all thermal triggers and retains more than 90% of the simulated neutrino events. It is clear that none of the collected events contain waveforms that match the shape expected for neutrino signals in two parallel channels, but cross-correlation of waveforms with excess power during windy periods are systematically larger than thermal noise events. Thermal triggers with the largest cross-correlation values are clustered in time and, as described in the text, possess unusual characteristics that clearly indicate they are background processes. This analysis indicates that the ARIANNA site is RF quiet, and meets requirements of the ARIANNA project. Using the effective volume per station and measured live-time, a preliminary flux limit was obtained to be E2φ ≤ 10-5 GeV cm-2 s-1 sr -1, assuming a E-2 differential energy spectrum. Based on initial experience with station operation and control, data transmission, and event analysis, we conclude that main scientific and technological objectives HRA pilot program are met. Initially, it was planned to complete HRA this upcoming season, but due to the government shutdown and subsequent drawdown of Antarctic operations, HRA completion has been postponed until November 2014. The focus of those efforts will be to reduce the time and manpower to deploy a station, reduce the level of logistical support to transport equipment to field and maintain the field camp, and reduce the cost of station construction and testing.

76 FR 38743 - Proposed Information Collection (Complaint of Employment Discrimination) Activity: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-01

... (Complaint of Employment Discrimination) Activity: Comment Request AGENCY: Human Resources and Administration, Department of Veterans Affairs. ACTION: Notice. SUMMARY: The Human Resources and Administration (HRA... http://www.Regulations.gov or to Lillette Turner-Nelson, Human Resources and Administration, Office of...

78 FR 24468 - Proposed Information Collection (Inquiry Concerning Applicant for Employment) Activity; Comment...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-25

... (Inquiry Concerning Applicant for Employment) Activity; Comment Request AGENCY: Office of Human Resources and Administration, Department of Veterans Affairs. ACTION: Notice. SUMMARY: The Office of Human Resources and Administration (HRA), Department of Veterans Affairs (VA), is announcing an opportunity for...

75 FR 13210 - Proposed Information Collection (Inquiry Concerning Applicant for Employment) Activity: Comment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

... (Inquiry Concerning Applicant for Employment) Activity: Comment Request AGENCY: Office of Human Resources and Administration, Department of Veterans Affairs. ACTION: Notice. SUMMARY: The Office of Human Resources and Administration (HRA), Department of Veterans Affairs (VA), is announcing an opportunity for...

Commentary: recognizing and tracking philanthropy's critical support of health research.

PubMed

Bond, Queta; Gallin, Elaine K

2012-11-01

Given the current fiscal climate limiting both government and industry support for health research, philanthropic support of health research is increasingly relevant because it provides some of the critical "risk capital" that stimulates innovation, helps translate basic research findings into clinical applications, helps support the career development of investigators, builds new infrastructure, and helps fill key funding gaps. Unfortunately, because of the philanthropic sector's diversity and scope, it is challenging to track the sector's health research investments. The authors briefly review the landscape of philanthropic organizations, identify several success stories resulting from philanthropic investments, and finally underscore the importance of gaining more knowledge about the sector through purposeful data collection efforts such as those of the Health Research Alliance (HRA), a consortium of nonprofit funders of biomedical research and training. Recent HRA efforts of this type are highlighted in this commentary and described in detail in the report by Myers et al in this issue of Academic Medicine.

Effect of Dietary Supplementation With Lutein, Zeaxanthin, and ω-3 on Macular Pigment: A Randomized Clinical Trial.

PubMed

Korobelnik, Jean-François; Rougier, Marie-Bénédicte; Delyfer, Marie-Noëlle; Bron, Alain; Merle, Bénédicte M J; Savel, Hélène; Chêne, Geneviève; Delcourt, Cécile; Creuzot-Garcher, Catherine

2017-11-01

Nutritional uptake of lutein, zeaxanthin, and ω-3 polyunsaturated fatty acids may increase macular pigment optical density (MPOD) and thereby protect against the development of age-related macular degeneration (AMD). To estimate the efficiency of dietary supplementation containing lutein, zeaxanthin, ω-3 polyunsaturated fatty acids, and vitamins to increase the density of macular pigment in first-generation offspring of parents with neovascular AMD. This study was a randomized clinical trial (Lutein Influence on Macula of Persons Issued From AMD Parents [LIMPIA]) with a 6-month treatment period, followed by a 6-month follow-up period. Analyses were based on the intent-to-treat principle. The setting was 2 university hospitals in France (at Bordeaux and Dijon) from January 2011 (first participant first visit) to February 2013 (last participant last visit). The analysis was conducted from January to November 2016. Participants were 120 individuals free of any retinal ocular disease. They were first-generation offspring of parents with neovascular AMD. Participants were randomized in a 1:1 ratio to receive either 2 daily dietary supplementation capsules or placebo for 6 months. The primary assessment criterion was the evolution of MPOD after 6 months of supplementation (value of both eligible eyes) measured using the modified MPD-Visucam 200 (Carl Zeiss Meditec) and the modified Heidelberg Retina Angiograph (Heidelberg Engineering) (HRA) at 0.98° eccentricity. The statistical analysis was adjusted for hospital and for risk factors. Overall, 120 participants (60 in each group) were included, and 239 eyes were analyzed (119 in the lutein plus zeaxanthin [L + Z] group and 120 in the placebo group). Their mean (SD) age was 56.7 (6.6) years, and 71.7% (n = 86) were female. A statistically significant increase in plasma lutein and zeaxanthin was shown in the L + Z group after 3 months and 6 months of treatment compared with the placebo group. However, the difference between groups in the evolution of MPOD measured by HRA 0.98° eccentricity between 6 months and baseline was 0.036 (95% CI, -0.037 to 0.110) (P = .33). Among first-generation offspring of parents with neovascular AMD in the LIMPIA trial, MPOD as measured with the modified HRA and the MPD-Visucam was not modified after 6 months of lutein and zeaxanthin dietary supplementation despite plasma levels showing continuous exposure to lutein and zeaxanthin. Further research is necessary to understand the mechanism of absorption and metabolism of these nutrients in the macula, the best way to measure MPOD, and the clinical benefit for the patients. clinicaltrials.gov Identifier: NCT01269697.

The Effects of Non-Contingent Feedback on the Incidence of Plateau at V̇O2max

PubMed Central

Gordon, Dan; Gernigon, Marie; Baker, James; Merzbach, Viviane; Scruton, Adrian

2017-01-01

The purpose of this study was to examine the effects of non-contingent feedback in the form of heart rate (HR) on the incidence of plateau at V̇O2max. Ten physically active males (age 24.8 yrs ± 4.2; mass 81.4 ± 9.0 kg; stature 1.80 ± 0.11 m, V̇O2max 53.2 ± 5.8 ml·kg-1.min-1) who were V̇O2max testing naïve but were cognisant as to the heart rate responses to exercise completed four incremental tests to volitional exhaustion, separated by ~72 h for the determination of V̇O2max and gas exchange threshold. The first trial served as a familiarisation with the remaining three being experimental conditions where HR was presented in a screen projection as either the actual response (HR-A) or 10 b·min-1 higher than recorded (HR-H) or 10 b·min-1 lower (HR-L). Throughout all trials V̇O2 was recorded on a breath-by-breath basis with plateau criteria of ≤ 50 ml·min-1. RESULTS: A significant difference was observed for Δ V̇O2 over the final two consecutive 30s sampling periods between HR-A, both HR-L and HR-H (p = 0.049) and for the incidence of plateau response between condition (p = 0.021). An additional significant difference was observed for sub-maximal Δ V̇O2 responses between HR-A and HR-H (p = 0.049) and HR-A and HR-L (p = 0.006). Non-significant differences were observed for all other criteria. These data indicate that when presented with non-contingent feedback in the form of HR, that the perceptually orientated pacing schema becomes disrupted promoting a sparing of the finite anaerobic capacity to compensate for the imbalance between the afferent signal and perception of effort. Key points The manifestation of the plateau at V̇O2max is disrupted (lower incidence rates) when participants are exposed to non-contingent feedback in the form of heart rate. Non-contingent feedback in the form of heart rate does not affect the V̇O2max score or associated cardio-respiratory parameters. Given the association between the V̇O2-plateau and the finite anaerobic capacity it is proposed that non-contingent feedback creates a sparing of this resource due to an imbalance between the perception of effort and the bio-feedback. PMID:28344458

78 FR 9317 - Glycine max

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-08

... synthase (GM-HRA) enzyme when used as a plant-incorporated protectant inert ingredient in or on the food and feed commodities of soybean. Pioneer Hi-Bred International, Inc. (DuPont Pioneer), submitted a... petition (PP 2E8059) by Pioneer Hi-Bred International, Inc. (DuPont Pioneer), 7100 NW., 62nd Avenue, P.O...

Classroom Practice--Pilots and Copilots for Better Reading

ERIC Educational Resources Information Center

Herring, Alice

2005-01-01

A cooperative project between middle-schoolers and elementary students makes clever use of a flight theme, and, as the author reports in this article, students' learning soars. In this project, the pilots are enthusiastic members of Ms. Herring's eighth-grade English class at Hampton Roads Academy (HRA) in Newport News, Virginia. The copilots are…

Human Resource Accounting: Interests and Conflicts. A Discussion Paper. CEDEFOP Panorama.

ERIC Educational Resources Information Center

Frederiksen, Jens V.; Westphalen, Sven-Age

This document examines the principles, use, and benefits of human resource accounting (HRA), which uses numerical and nonnumerical data on items such as costs and benefits of training, staff turnover, absenteeism, and the value of employees' knowledge to measure the value of human resources in enterprises. The introduction presents an overview of…

Human health risk assessment case study: an abandoned metal smelter site in Poland.

PubMed

Wcisło, Eleonora; Ioven, Dawn; Kucharski, Rafal; Szdzuj, Jerzy

2002-05-01

United States Environmental Protection Agency methodologies for human health risk assessment (HRA) were applied in a Brownfields Demonstration Project on the Warynski smelter site (WSS), an abandoned industrial site at Piekary Slaskie town, Upper Silesia, Poland. The HRA included the baseline risk assessment (BRA) and the development of risk-based preliminary remedial goals (RBPRGs). The HRA focused on surface area covered with waste materials, which were evaluated with regard to the potential risks they may pose to humans. Cadmium, copper, iron, manganese, lead, and zinc were proposed as the contaminants of potential concern (COPCs) at WSS based on archive data on chemical composition of waste located on WSS. For the defined future land use patterns, the industrial (I) and recreational (II) exposure scenarios were assumed and evaluated. The combined hazard index for all COPCs was 3.1E+00 for Scenario I and 3.2E+00 for Scenario II. Regarding potential carcinogenic risks associated with the inhalation route, only cadmium was a contributor, with risks of 1.6E-06 and 2.6E-07 for Scenario I and Scenario II, respectively. The results of the BRA indicated that the potential health risks at WSS were mainly associated with waste material exposure to cadmium (industrial and recreational scenarios) and lead (industrial scenario). RBPRGs calculated under the industrial scenario were 1.17E+03 and 1.62E+03 mg/kg for cadmium and lead, respectively. The RBPRG for cadmium was 1.18E+03 mg/kg under the recreational scenario. The BRA results, as well as RBCs, are comparable for both scenarios, so it is impossible to prioritize land use patterns for WSS based on these results. For choosing a future land use pattern or an appropriate redevelopment option, different factors would be decisive in the decision-making process, e.g., social, market needs, technical feasibility and costs of redevelopment actions or acceptance of local community.

Using routinely collected data to augment the management of health and productivity loss.

PubMed

Allen, Harris

2008-06-01

To test models of productivity loss developed from data collected using a health risk appraisal (HRA) designed to examine health in the broader context of work, mental well-being, and the demands of organizational and family life. Secondary analyses of a data extract provided by the HRA's developer. These analyses focused on 17,821 respondents whose version of the HRA included the Work Limitation Questionnaire. Structural equation techniques were used to estimate a series of models featuring 38 measures and a four-step hypothesized sequence. The tests confirmed the presence of two distinct but interrelated components driven by health issues--Presenteeism (impaired performance at work) and Absenteeism (time away from work)--posited to describe productivity loss. The tests also documented the predictive power of eight categories of measures in accounting for the phenomenon. Preeminent among these predictors was a heterogeneous set of measures encompassing current and future aspects of Health. But measures from seven other categories--Work-Life Balance, Personal Life Impact, Stress, Financial Concerns, and Job, Employee, and Company Characteristics--also made significant contributions. Combined, their unique contribution was five times that of Health alone. This case study illustrates how data routinely captured via an instrument that is an example of a class of self-reports surveys increasingly being used to address a variety of workforce issues can be tapped to describe and predict productivity loss. The results confirm the key role that Health plays in determining the phenomenon. They also affirm the advisability of incorporating into interventions undertaken to reduce productivity loss an orientation that is paralleled by the recent emergence of the use of quality of life measures in provider settings. This orientation is predicated on the need to take into better account other contextual factors that exert considerable influences through as well as above and beyond Health.

Evaluation of the nutritional equivalency of soybean meal with the genetically modified trait DP-3O5423-1 when fed to laying hens.

PubMed

Mejia, L; Jacobs, C M; Utterback, P L; Parsons, C M; Rice, D; Sanders, C; Smith, B; Iiams, C; Sauber, T

2010-12-01

An experiment using 336 Hy-Line W-36 Single Comb White Leghorn hens was conducted to evaluate transgenic soybeans containing the gm-fad2-1 gene fragment and the gm-hra gene. Transcription of the gm-fad2-1 gene fragment results in an increased level of oleic acid (18:1) in the seed, and expression of the soybean acetolactate synthase protein (GM-HRA) encoded by the modified gm-hra gene, is used as a selectable marker during transformation. Pullets (20 wk of age) were placed in cage lots (7 hens/cage, 2 cages/lot) and were randomly assigned to 1 of 4 corn-soybean meal dietary treatments (6 lots/treatment) formulated with the following soybean meals: nontransgenic near-isoline control (control), nontransgenic commercial reference soybean meal A (92M72), nontransgenic commercial reference soybean meal B (93B15), or transgenic soybean meal produced from soybeans containing event DP-3Ø5423-1 (305423). Weeks 20 to 24 were a preconditioning period, and the 4 experimental diets were then fed from 25 to 36 wk of age. Differences between the 305423 and control group means were evaluated, with statistical significance at P < 0.05. Body weight, hen-day egg production, egg mass, feed consumption, and feed efficiency for hens fed the 305423 soybean meal were not significantly different from the respective values for hens fed diets formulated with the near-isoline soybean meal. Likewise, egg component weights, Haugh unit measures, and egg weights were similar regardless of the soybean meal source. This research indicates that performance of hens fed diets containing 305423 soybean meal, as measured by egg production and egg quality, was similar to that of hens fed diets formulated with the near-isoline control and commercial soybean meals.

High Rates of Anal High-Grade Squamous Intraepithelial Lesions in HIV-Infected Women Who Do Not Meet Screening Guidelines.

PubMed

Gaisa, Michael; Ita-Nagy, Fanny; Sigel, Keith; Arens, Yotam; Hennessy, Mary Ann; Rodriguez-Caprio, Gabriela; Mullen, Michael; Aberg, Judith A; Cespedes, Michelle

2017-02-01

Human immunodeficiency virus (HIV)-infected women have a higher burden of anal high-grade squamous intraepithelial lesions (HSIL) and anal cancer (AC) compared with HIV-uninfected women. Guidelines for AC screening in this population are heterogeneous. Here we report outcomes and risk factors for anal HSIL following implementation of universal AC screening offered to all HIV-infected women. Data from women who underwent AC screening with anal cytology from April 2009 to July 2014 were analyzed. Routine clinical data included anal and cervical cytology, demographic/behavioral data, and high-resolution anoscopy (HRA) results. We evaluated the association of cytology with HRA results, and predictors of HSIL pathology, and compared rates of HSIL pathology among women meeting screening guidelines to those who did not. Seven hundred forty-five HIV-infected women were screened with anal cytology. Thirty-nine percent had abnormal anal cytology on initial screen and 15% on secondary screen; 208 women underwent HRA following abnormal anal cytology. HSIL was found in 26% and 18% of anal biopsies following initial and secondary screening, respectively. One woman had AC. Cigarette smoking more than doubled HSIL risk. Among women who underwent AC screening despite not meeting existing guideline criteria, 21% and 10%, respectively, were found to have HSIL on biopsy. Neither meeting criteria for screening nor history of receptive anal sex was significantly associated with HSIL. Anal HSIL is common in HIV-infected women. Substantial numbers of HSIL would have been missed by strictly adhering to existing AC screening guidelines. These results support routine screening of all HIV-infected women regardless of human papillomavirus history or sexual practices. © The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail journals.permissions@oup.com.

Is stress a trigger factor for migraine?

PubMed

Schoonman, G G; Evers, D J; Ballieux, B E; de Geus, E J; de Kloet, E R; Terwindt, G M; van Dijk, J G; Ferrari, M D

2007-06-01

Although mental stress is commonly considered to be an important trigger factor for migraine, experimental evidence for this belief is yet lacking. To study the temporal relationship between changes in stress-related parameters (both subjective and objective) and the onset of a migraine attack. This was a prospective, ambulatory study in 17 migraine patients. We assessed changes in perceived stress and objective biological measures for stress (saliva cortisol, heart rate average [HRA], and heart rate variability [low-frequency power and high-frequency power]) over 4 days prior to the onset of spontaneous migraine attacks. Analyses were repeated for subgroups of patients according to whether or not they felt their migraine to be triggered by stress. There were no significant temporal changes over time for the whole group in perceived stress (p=0.50), morning cortisol (p=0.73), evening cortisol (p=0.55), HRA (p=0.83), low-frequency power (p=0.99) and high-frequency power (p=0.97) prior to or during an attack. Post hoc analysis of the subgroup of nine stress-sensitive patients who felt that >2/3 of their migraine attacks were triggered by psychosocial stress, revealed an increase for perceived stress (p=0.04) but no changes in objective stress response measures. At baseline, this group also showed higher scores on the Penn State Worry Questionnaire (p=0.003) and the Cohen Perceived Stress Scale (p=0.001) compared to non-stress-sensitive patients. Although stress-sensitive patients, in contrast to non-stress-sensitive patients, may perceive more stress in the days before an impending migraine attack, we failed to detect any objective evidence for a biological stress response before or during migraine attacks.

Mayor de Blasio: Comprehensive Homeless Services Plan Increases Focus on

Science.gov Websites

HRA management structure based on the veterans move out initiative will focus on finding permanent structure based on the veterans move out initiative to promote move outs to reduce the shelter census Focus on Prevention & Rehousing Result of 90-day review includes streamlined management structure

Are we there yet? An examination of online tailored health communication.

PubMed

Suggs, L Suzanne; McIntyre, Chris

2009-04-01

Increasingly, the Internet is playing an important role in consumer health and patient-provider communication. Seventy-three percent of American adults are now online, and 79% have searched for health information on the Internet. This study provides a baseline understanding of the extent to which health consumers are able to find tailored communication online. It describes the current behavioral focus, the channels being used to deliver the tailored content, and the level of tailoring in online-tailored communication. A content analysis of 497 health Web sites found few examples of personalized, targeted, or tailored health sites freely available online. Tailored content was provided in 13 Web sites, although 15 collected individual data. More health risk assessment (HRA) sites included tailored feedback than other topics. The patterns that emerged from the analysis demonstrate that online health users can access a number of Web sites with communication tailored to their needs.

A Focus Group Assessment to Determine Motivations, Barriers and Effectiveness of a University-Based Worksite Wellness Program

PubMed Central

Hill-Mey, Patricia E.; Merrill, Ray M.; Kumpfer, Karol L.; Reel, Justine; Hyatt-Neville, Beverly

2013-01-01

Background: This study explores university employee perceptions and under­standing about its Worksite Health Promotion Program (WHPP). The WHPP included a Health Risk Appraisal (HRA), biometric screening, publicity for on-campus health programs and facilities, and health coaching. Methods: A qualitative design was used based on a grounded theory ap­proach. Four 90 minutes focus groups with 6-8 participants in each were conducted within a two 2 week period among employees, representing fac­ulty/participants, fac­ulty/nonparticipants, staff/participants, and staff/nonparticipants. Responses to questions about motivations, barriers, and perceived health benefits that impacted participation in the WHPP were digi­tally recorded, transcribed and coded for themes. Results: Incentives effectively motivated participation. Biometric screening had the largest impact on behavior change, followed by the information learned from the HRA. However, despite two-thirds of the employees partici­pating in the pro­gram, lack of a full understanding of WHPP benefits and services lowered partici­pation in follow-up services and supplemental pro­grams. Conclusions: Biometric screening and HRAs effectively motivate program par­ticipation. Communication of benefits and services are important when providing WHPPs. PMID:24688965

SIMULATED HUMAN ERROR PROBABILITY AND ITS APPLICATION TO DYNAMIC HUMAN FAILURE EVENTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herberger, Sarah M.; Boring, Ronald L.

Abstract Objectives: Human reliability analysis (HRA) methods typically analyze human failure events (HFEs) at the overall task level. For dynamic HRA, it is important to model human activities at the subtask level. There exists a disconnect between dynamic subtask level and static task level that presents issues when modeling dynamic scenarios. For example, the SPAR-H method is typically used to calculate the human error probability (HEP) at the task level. As demonstrated in this paper, quantification in SPAR-H does not translate to the subtask level. Methods: Two different discrete distributions were generated for each SPAR-H Performance Shaping Factor (PSF) tomore » define the frequency of PSF levels. The first distribution was a uniform, or uninformed distribution that assumed the frequency of each PSF level was equally likely. The second non-continuous distribution took the frequency of PSF level as identified from an assessment of the HERA database. These two different approaches were created to identify the resulting distribution of the HEP. The resulting HEP that appears closer to the known distribution, a log-normal centered on 1E-3, is the more desirable. Each approach then has median, average and maximum HFE calculations applied. To calculate these three values, three events, A, B and C are generated from the PSF level frequencies comprised of subtasks. The median HFE selects the median PSF level from each PSF and calculates HEP. The average HFE takes the mean PSF level, and the maximum takes the maximum PSF level. The same data set of subtask HEPs yields starkly different HEPs when aggregated to the HFE level in SPAR-H. Results: Assuming that each PSF level in each HFE is equally likely creates an unrealistic distribution of the HEP that is centered at 1. Next the observed frequency of PSF levels was applied with the resulting HEP behaving log-normally with a majority of the values under 2.5% HEP. The median, average and maximum HFE calculations did yield different answers for the HFE. The HFE maximum grossly over estimates the HFE, while the HFE distribution occurs less than HFE median, and greater than HFE average. Conclusions: Dynamic task modeling can be perused through the framework of SPAR-H. Identification of distributions associated with each PSF needs to be defined, and may change depending upon the scenario. However it is very unlikely that each PSF level is equally likely as the resulting HEP distribution is strongly centered at 100%, which is unrealistic. Other distributions may need to be identified for PSFs, to facilitate the transition to dynamic task modeling. Additionally discrete distributions need to be exchanged for continuous so that simulations for the HFE can further advance. This paper provides a method to explore dynamic subtask to task translation and provides examples of the process using the SPAR-H method.« less

Differing Developmental Trajectories in Heart Rate Responses to Speech Stimuli in Infants at High and Low Risk for Autism Spectrum Disorder

ERIC Educational Resources Information Center

Perdue, Katherine L.; Edwards, Laura A.; Tager-Flusberg, Helen; Nelson, Charles A.

2017-01-01

We investigated heart rate (HR) in infants at 3, 6, 9, and 12 months of age, at high (HRA) and low (LRC) familial risk for ASD, to identify potential endophenotypes of ASD risk related to attentional responses. HR was extracted from functional near-infrared spectroscopy recordings while infants listened to speech stimuli. Longitudinal analysis…

Effects of health risk assessment and counselling on physical activity in older people: A pragmatic randomised trial.

PubMed

Herghelegiu, Anna Marie; Moser, André; Prada, Gabriel Ioan; Born, Stephan; Wilhelm, Matthias; Stuck, Andreas E

2017-01-01

Interventions to increase physical activity (PA) among older community-dwelling adults may be enhanced by using multidimensional health risk assessment (HRA) as a basis for PA counselling. The study was conducted among nondisabled but mostly frail persons 65 years of age and older at an ambulatory geriatric clinic in Bucharest, Romania. From May to July 2014, 200 participants were randomly allocated to intervention and control groups. Intervention group participants completed an initial HRA questionnaire and then had monthly counselling sessions with a geriatrician over a period of six months that were aimed at increasing low or maintaining higher PA. Counselling also addressed the older persons' concomitant health risks and problems. The primary outcome was PA at six months (November 2014 to February 2015) evaluated with the International Physical Activity Questionnaire. At baseline, PA levels were similar in intervention and control groups (median 1089.0, and 1053.0 MET [metabolic equivalent of task] minutes per week, interquartile ranges 606.0-1401.7, and 544.5-1512.7 MET minutes per week, respectively). Persons in the intervention group had an average of 11.2 concomitant health problems and risks (e.g., pain, depressive mood, hypertension). At six months, PA increased in the intervention group by a median of 180.0 MET minutes per week (95% confidence interval (CI) 43.4-316.6, p = 0.01) to 1248.8 MET minutes per week. In the control group, PA decreased by a median of 346.5 MET minutes per week (95% CI 178.4-514.6, p<0.001) to 693.0 MET minutes per week due to a seasonal effect, resulting in a difference of 420.0 MET minutes per week (95% CI 212.7-627.3, p< 0.001) between groups. The use of HRA to inform individualized PA counselling is a promising method for achieving improvements in PA, and ultimately health and longevity among large groups of community-dwelling older persons. International Standard Randomized Controlled Trial Number: ISRCTN11166046.

Final report on APMP.M.H-S3: Comparison on hardness measurement Rockwell scale A and B

NASA Astrophysics Data System (ADS)

Sanponpute, Tassanai; Meesaplak, Apichaya; Menelao, Febo; Chan, T. K.; Bahng, Gun-Woong; Titus, S. S. K.; Jain, S. K.

2012-01-01

The APMP.M.H-S3 Rockwell hardness intercomparison was initiated by NIMT, Thailand and the required protocol was prepared by NIMT and checked by Dr John Man, MNIA, Australia, in 2009. PTB, Germany, Standards and Calibration Laboratory (SCL), Hong Kong, National Physical Laboratory (NPLI), India, and Korea Research Institute of Standards and Science (KRISS), Korea, participated in this comparison. This comparison exercise was focused on the measurement range of 25 to 100 HRBW scale and 35 to 85 HRA scale. The round robin test was done during the period from April 2010 to October 2010. The participating laboratories have demonstrated the capability of the machine and the operating conditions according to ISO 6508 Part 3 to perform the measurements. However, SCL, Hong Kong, could demonstrate their capability to perform the measurements only according to ISO 6508 Part 2. The CMCs declared by the different laboratories lie in the range of 0.30 HRA to 0.40 HRA and 0.40 HRBW to 0.75 HRBW. The CMC declared by SCL for the Rockwell B scale is 1.5 HRBW for the reason described above. It is observed from the results that the measurement uncertainty is estimated not less than the CMCs declared by the laboratories. From the measurement results provided by all the participating laboratories, the En ratio was determined to establish the degrees of equivalence. The En ratio was calculated by including as well as by excluding the results of the laboratory which has performed the test according to ISO 6508 Part 2 in order to make sure that it does not affect the overall results. It is noticed that the En ratio was still found to remain less than 1. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the APMP, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Comparison of broiler performance when fed diets containing event DP-3O5423-1, nontransgenic near-isoline control, or commercial reference soybean meal, hulls, and oil.

PubMed

McNaughton, J; Roberts, M; Smith, B; Rice, D; Hinds, M; Sanders, C; Layton, R; Lamb, I; Delaney, B

2008-12-01

DP-3Ø5423-1 (305423) is a genetically modified soybean that was produced by biolistic insertion of the gm-fad2-1 gene fragment and gm-hra genes into the germline of soybean seeds. Expression of gm-fad2-1 results in greater concentrations of oleic acid (18:1) by suppressing expression of the endogenous FAD2-1 gene, which encodes an n-6 fatty acid desaturase enzyme that catalyzes desaturation of 18:1 to linoleic acid (18:2). The GM-HRA protein expressed by the gm-hra gene is a modified version of the soybean acetolactate synthase enzyme that is used as a selectable marker during transformation. A 42-d feeding trial was conducted with broiler chickens to compare the nutritional performance of 305423 soybeans with nontransgenic soybeans. Diets were prepared using processed fractions (meal, hulls, and oil) from 305423 soybean plants. For comparison, additional diets were produced with soybean fractions obtained from a nontransgenic near-isoline (control) and nontransgenic commercial Pioneer brand varieties (93B86, 93B15, and 93M40). Diets were fed to Ross x Cobb broilers (n = 120/group, 50% male and 50% female) in 3 phases. Starter, grower, and finisher diets contained 26.5, 23, and 21.5% soybean meal, respectively. Soybean hulls and oil were added at 1.0 and 0.5%, respectively, across all diets in each phase. No statistically significant differences were observed in growth performance (BW, mortality, feed efficiency), organ yield (liver and kidney), or carcass yield (breast, thigh, leg, wing, and abdominal fat) variables between broilers consuming diets prepared with isolated fractions from 305423 or near-isoline control soybean. Additionally, all performance and carcass variables from control and 305423 soybean treatment groups fell within tolerance intervals constructed for each response variable using data from broilers fed diets prepared with reference soybean fractions. Based on the results from this study, it was concluded that 305423 soybeans were nutritionally equivalent to non-transgenic control soybeans with a comparable genetic background.

The Study of the Prevention of Anal Cancer (SPANC): design and methods of a three-year prospective cohort study

PubMed Central

2013-01-01

Background The incidence of human papillomavirus (HPV)-associated anal cancer is increasing in men who have sex with men (MSM). Screening for the presumed cancer precursor, high-grade anal squamous intraepithelial lesions (HSIL) in a manner analogous to cervical cancer screening has been proposed. Uncertainty remains regarding anal HPV natural history and the role of anal cytology and high-resolution anoscopy (HRA) as screening tests. Well-designed cohort studies are required to address these issues. Methods/design The SPANC study is a prospective study of the epidemiology of low-risk and high-risk anal HPV infection and related cytological and histological abnormalities in HIV-negative and HIV-positive homosexual men aged 35 years and over. The study aims to recruit 600 men from community-based settings in Sydney, Australia. There are six study visits over three years. At the first five visits men undergo a digital ano-rectal examination (DARE), an anal “Papanicolaou” (Pap) test for HPV detection, genotyping and anal cytology, followed by HRA and directed biopsy of any visible abnormalities. The men also complete a behavioural questionnaire before each visit. Questions include a detailed history of sexual behaviour, of anal symptoms, possible anal cancer risk factors and validated quality of life and psychosocial questions. Questionnaires are also completed 2 weeks and 3 months following the provision of test results and include questions on participant experience during the procedure and post-procedure symptoms, including pain and bleeding in addition to quality of life/ psychosocial outcomes. Discussion Recruitment for the study began in September 2010 and will conclude in mid-2015, with follow up continuing to 2018. Thus far, over 350 men have been recruited from a variety of community-based settings and are broadly representative of the target screening population. The SPANC study is one of only a small number of cohort studies globally to perform HPV, cytology and HRA screening on all participants over multiple time points. The study results will contribute to understanding of the natural history of anal HPV and inform the possible development of guidelines for implementing anal cancer screening programs in this population. PMID:24107134

The Impact of Dose and Simultaneous Use of Acid-Reducing Agents on the Effectiveness of Vemurafenib in Metastatic BRAF V600 Mutated Melanoma: a Retrospective Cohort Study.

PubMed

Knapen, Lotte M; Koornstra, Rutger H T; Driessen, Johanna H M; van Vlijmen, Bas; Croes, Sander; Schalkwijk, Stein; Colbers, Angela; Gerritsen, Winald R; Burger, David M; de Vries, Frank; van Erp, Nielka P

2018-04-11

The impact of dose and simultaneous use of acid-reducing agents (ARAs) on the effectiveness of vemurafenib is unknown. To determine the association between progression of metastatic BRAF V600 mutated melanoma and (1) dose reductions of vemurafenib and (2) simultaneous use of vemurafenib and ARAs. A retrospective cohort study of 112 first-line vemurafenib users for melanoma was conducted (March 2012-March 2016), using electronic patient records and pharmacy dispensing records of a Dutch academic hospital. Cox regression analysis was used to estimate the risk of progression with full-dose (n = 64) versus reduced-dose vemurafenib (n = 48) and with simultaneous use of vemurafenib and ARAs (n = 35) versus vemurafenib alone (n = 77). Analyses were adjusted for age and sex. In total, disease progression occurred in 55% of treated patients on vemurafenib, with a median progression-free survival of 6.0 (95% confidence interval [CI] 5.0-6.9) months. Compared to patients on vemurafenib alone, there was no increased risk of progression among patients requiring vemurafenib at a reduced dose or among patients receiving simultaneous therapy with vemurafenib and ARAs. In addition, there was no increased risk of progression among patients who used reduced-dose vemurafenib and ARAs versus those receiving full-dose vemurafenib as sole therapy. However, a tendency for progression was observed among patients who used full-dose vemurafenib and ARAs versus full-dose vemurafenib alone (adjusted hazard ratio [HRa] 2.37; 95% CI 0.97-5.76), which became statistically significant in a sensitivity analysis (HRa 4.56; 95% CI 1.51-13.75). There was no association between the use of vemurafenib in a reduced dose or the simultaneous use of vemurafenib and ARAs and the risk of progression. In addition, there was no association between the simultaneous use of vemurafenib in a reduced dose and ARAs and the risk of progression. However, patients tolerating  full-dose vemurafenib simultaneously with ARAs might have an increased risk of progression. This finding requires prospective validation.

78 FR 77144 - Announcement of Funding Awards for Fiscal Year 2013 for the Housing Choice Voucher Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-20

..., HOPEWELL, VA 23860. VA: VIRGINIA HSG REDEV AUTH.. 601 SOUTH 0 9,400 BELVIDERE ST, RICHMOND, VA 23220. VT...: HENDERSON HA 111 SOUTH ADAMS 0 17,800 ST, HENDERSON, KY 42420. KY: CYNTHIANA HA 149 FEDERAL ST, 0 4,200... 20895. MI: MICHIGAN STATE HSG DEV PO BOX 30044, 0 84,800 AUTH. LANSING, MI 48909. MN: VIRGINIA HRA PO...

Monitoring emerging contaminants in the drinking water of Milan and assessment of the human risk.

PubMed

Riva, Francesco; Castiglioni, Sara; Fattore, Elena; Manenti, Angela; Davoli, Enrico; Zuccato, Ettore

2018-04-01

Emerging Contaminants (ECs) are ubiquitous in waters, arousing concern because of their potential risks for human health and the environment. This study investigated the presence of multiple classes of ECs in 21 wells over the drinking water network of Milan, in the most inhabited and industrialized area of Italy, and assessed the risks for consumers. Samples were analyzed using liquid chromatography coupled to mass spectrometry. Human risk assessment (HRA) was conducted by comparing the measured concentrations with drinking water thresholds from guidelines or calculated in this study; first considering the exposure to each single EC and then the entire mixture. Thirteen ECs were measured in the low ng/L range, and were generally detected in less than half of the wells. Pharmaceuticals, perfluorinated substances, personal care products, and anthropogenic markers were the most frequently detected. The results of the HRA excluded any risks for consumers in each scenario considered. This is one of the most comprehensive studies assessing the presence of a large number of ECs in the whole drinking water network of a city, and the risks for human health. Results improve the limited information on ECs sources and occurrence in drinking water and help establishing guidelines for regulatory purposes. Copyright © 2018 Elsevier GmbH. All rights reserved.

Ketoconazole inhibits the in vitro and in vivo metabolism of all-trans-retinoic acid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Wauwe, J.P.; Coene, M.C.; Goossens, J.

1988-05-01

Ketoconazole, an antifungal agent and inhibitor of certain mammalian cytochrome P-450-dependent enzymes, was studied for its effects on the in vitro and in vivo metabolism of all-trans-retinoic acid (RA). In vitro, ketoconazole (Ki = 0.75 microM) inhibited, in an apparently competitive manner, the cytochrome P-450-mediated metabolism to 4-hydroxy- and 4-keto-retinoic acids by hamster liver microsomes. In vivo, ketoconazole suppressed the formation of polar RA metabolites by normal rats dosed intrajugularly with 200 ng of (/sup 3/H)RA. After p.o. treatment with ketoconazole (2.5-40 mg/kg) given 1 hr before the (/sup 3/H)RA injection, the radioactivity extracted from the liver consisted of 25more » to 50% polar metabolites (control 66 +/- 1%) and 50 to 75% undegraded RA (control 34 +/- 1%) as evidenced by reverse-phase high-performance liquid chromatography. Time course experiments showed that ketoconazole's inhibitory effects lasted for 3 hr. Our data indicate the quantitative importance of the cytochrome P-450 enzymatic pathway in the biotransformation of RA. They also suggest that ketoconazole is capable of prolonging the biological half-life of RA and of improving the tissue levels of this compound.« less

User-centered design and usability testing of an innovative health-related quality of life module.

PubMed

Nagykaldi, Z J; Jordan, M; Quitoriano, J; Ciro, C A; Mold, J W

2014-01-01

Various computerized health risk appraisals (HRAs) are available, but few of them assess health-related quality of life (HRQoL) in a goal-directed framework. This study describes the user-centered development and usability testing of an innovative HRQoL module that extends a validated HRA tool in primary care settings. Systematic user-centered design, usability testing, and qualitative methods were used to develop the HRQoL module in primary care practices. Twenty two patients and 5 clinicians participated in two rounds of interactive technology think-out-loud sessions (TOLs) and semi-structured interviews (SSIs) to iteratively develop a four-step, computerized process that collects information on patient goals for meaningful life activities and current level of disability and presents a personalized and prioritized list of preventive recommendations linked to online resources. Analysis of TOLs and SSIs generated 5 categories and 11 sub-categories related to facilitators and barriers to usability and human-technology interaction. The categories included: Understanding the Purpose, Usability, Perceived Value, Literacy, and Participant Motivation. Some categories were inter-connected. The technology was continually and iteratively improved between sessions until saturation of positive feedback was achieved in 4 categories (addressing motivation will require more research). Usability of all screen units of the module was improved substantially. Clinician feedback emphasized the importance of the module's ability to translate the patient-centered HRQoL Report into actionable items for clinicians to facilitate shared decision-making. Complete integration of the HRQoL module into the existing HRA will require further development and testing. Systematic application of user-centered design and human factors principles in technology development and testing may significantly improve the usability and clinical value of health information systems. This more sophisticated approach helped us translate complex clinical concepts, goal-setting steps, and decision-support processes into an accepted and value-added technology.

Multilevel analysis of the physical health perception of employees: community and individual factors.

PubMed

Sathyanarayanan, Sudhakar; Brooks, Ambyr J; Hagen, Susan E; Edington, Dee W

2012-01-01

To investigate whether the communities where employees reside are associated with employee perception of overall physical health after adjusting for individual factors. Retrospective cross-sectional. Active employees from a large manufacturing company representing 157 zip code tabulation areas (ZCTAs) in Michigan. 22,012 active employees who completed at least one voluntary health risk appraisal (HRA) during 1999-2001. Community deprivation and racial segregation at the ZCTA level were obtained using indices created from 2000 U.S. Census data. Demographics and HRA-related data (health-related behaviors, medical history, and quality of life indicators) at the individual level were used as independent variables. A two-level logistic regression model (employees nested in ZCTA) was used to model the probability of better self-rated health perception (SRH) (better health: 89.1% versus poor health: 10.9%). Relative to those living in highly deprived communities, employees residing in less-deprived communities showed 2.06 (95% confidence interval [CI], 1.57-2.72) and those living in moderately deprived communities showed 1.83 (95% CI, 1.42-2.35) increased odds of better SRH. After adjusting for individual-level variables, employees living in less-deprived communities had increased odds (1.31 [95% CI, 1.07-1.60]) and those living in moderately deprived communities had increased odds (1.33 [95% CI, 1.11-1.59]) of better SRH compared with individuals from highly deprived communities. The association of racial segregation with employees' SRH was mediated after adjusting for other variables. Individual-level variables showed significant statistical associations with SRH. Communities do have a modest association with SRH of the employees living there. After adjusting for individual-level and demographic variables, employees living in less/moderately deprived communities are more likely to perceive better physical health relative to those who live in highly deprived communities.

Multiple Evolutionary Events Involved in Maintaining Homologs of Resistance to Powdery Mildew 8 in Brassica napus.

PubMed

Li, Qin; Li, Jing; Sun, Jin-Long; Ma, Xian-Feng; Wang, Ting-Ting; Berkey, Robert; Yang, Hui; Niu, Ying-Ze; Fan, Jing; Li, Yan; Xiao, Shunyuan; Wang, Wen-Ming

2016-01-01

The Resistance to Powdery Mildew 8 (RPW8) locus confers broad-spectrum resistance to powdery mildew in Arabidopsis thaliana. There are four Homologous to RPW8s (BrHRs) in Brassica rapa and three in Brassica oleracea (BoHRs). Brassica napus (Bn) is derived from diploidization of a hybrid between B. rapa and B. oleracea, thus should have seven homologs of RPW8 (BnHRs). It is unclear whether these genes are still maintained or lost in B. napus after diploidization and how they might have been evolved. Here, we reported the identification and sequence polymorphisms of BnHRs from a set of B. napus accessions. Our data indicated that while the BoHR copy from B. oleracea is highly conserved, the BrHR copy from B. rapa is relatively variable in the B. napus genome owing to multiple evolutionary events, such as gene loss, point mutation, insertion, deletion, and intragenic recombination. Given the overall high sequence homology of BnHR genes, it is not surprising that both intragenic recombination between two orthologs and two paralogs were detected in B. napus, which may explain the loss of BoHR genes in some B. napus accessions. When ectopically expressed in Arabidopsis, a C-terminally truncated version of BnHRa and BnHRb, as well as the full length BnHRd fused with YFP at their C-termini could trigger cell death in the absence of pathogens and enhanced resistance to powdery mildew disease. Moreover, subcellular localization analysis showed that both BnHRa-YFP and BnHRb-YFP were mainly localized to the extra-haustorial membrane encasing the haustorium of powdery mildew. Taken together, our data suggest that the duplicated BnHR genes might have been subjected to differential selection and at least some may play a role in defense and could serve as resistance resource in engineering disease-resistant plants.

Prevention of atrial fibrillation by inter-atrial septum pacing guided by electrophysiological testing, in patients with delayed interatrial conduction.

PubMed

Manolis, A G; Katsivas, A G; Vassilopoulos, C; Koutsogeorgis, D; Louvros, N E

2002-04-01

Interatrial septum (IAS) pacing seems efficient in synchronizing atrial depolarization in patients (pts) with delayed inter-atrial conduction, but its clinical role in preventing atrial tachyarrhythmias is still debated. This study was conducted in order to evaluate the clinical efficacy of IAS pacing guided by pace mapping of the IAS, as an alternative treatment modality in pts with drug refractory paroxysmal atrial fibrillation (PAF). We evaluated 29 pts (13 male, 16 female, 60 +/- 11 years), with drug refractory PAF, normal sinus node function and prolonged inter-atrial conduction time (P wave 142 +/- 10 ms). Multipolar catheters were inserted and the electrograms from the high right atrium (HRA) and proximal, middle and distal coronary sinus (CS) were recorded. The IAS was paced from multiple sites. The site of IAS where the timing between HRA and distal CS was <20 ms was considered the most suitable for synchronizing the atria. This site was found to be superior to the CS os. near the fossa ovalis in all pts. An active fixation atrial lead was positioned at this site and a standard lead was placed in the right ventricle. During IAS pacing, the P wave duration decreased significantly to 107 +/- 15 ms (P<0.001). At implant, the atrial sensing was 2.3 +/- 0.7 mV, the atrial pacing threshold was 0.95 +/- 0.15 V (0.5 ms) and the impedance was 760 +/- 80 Ohm. We evaluated the pts during four periods of 3 months duration each. The first period (control) was before pacemaker implantation, while the pts were under antiarrhythmic treatment. During the subsequent two periods, we evaluated the clinical efficacy of IAS pacing to prevent PAF recurrences, in AAT (75 bpm) and AAIR (75-140 bpm) mode, with random selection of the order and after discontinuation of antiarrhythmic treatment. During the fourth period, the same AAIR mode was assessed, but antiarrhythmic drugs were also administered. We compared the arrhythmia free interval among the four periods. The proportion of atrial paced beats in AAIR pacing mode plus antiarrhythmics was significantly higher compared with the drug-free period in AAIR mode (57 +/- 9% and 49 +/- 9% respectively, P=0017) and with AAT pacing mode (44 +/- 10%,(, P<0.001). In AAT mode, the arrhythmia free interval was 24.2 +/- 5.1 days, while it was 26.2 +/- 5.7 days in AAIR mode. These intervals did not differ significantly from the pre-implantation period (24.1 +/- 6.3 days). The arrhythmia free interval in AAIR pacing in combination with antiarrhythmic drug therapy was 38.7 +/- 8.1 days and this was significantly longer than the previous periods (P<0.05). Atrial septal pacing in combination with antiarrhythmic drug therapy reduced the incidence of PAF in pts with prolonged inter-atrial conduction times. Pace mapping of the IAS is an attractive technique to assess the shortest atrial activation time between HRA and distal CS. Whether placement of the atrial lead based on the shortest HRA--distal CS time is the best place in the IAS to prevent PAF still remains to be proven.

Semantic Interoperability of Health Risk Assessments

PubMed Central

Rajda, Jay; Vreeman, Daniel J.; Wei, Henry G.

2011-01-01

The health insurance and benefits industry has administered Health Risk Assessments (HRAs) at an increasing rate. These are used to collect data on modifiable health risk factors for wellness and disease management programs. However, there is significant variability in the semantics of these assessments, making it difficult to compare data sets from the output of 2 different HRAs. There is also an increasing need to exchange this data with Health Information Exchanges and Electronic Medical Records. To standardize the data and concepts from these tools, we outline a process to determine presence of certain common elements of modifiable health risk extracted from these surveys. This information is coded using concept identifiers, which allows cross-survey comparison and analysis. We propose that using LOINC codes or other universal coding schema may allow semantic interoperability of a variety of HRA tools across the industry, research, and clinical settings. PMID:22195174

The association of two productivity measures with health risks and medical conditions in an Australian employee population.

PubMed

Musich, Shirley; Hook, Dan; Baaner, Stephanie; Edington, Dee W

2006-01-01

To investigate the impact of health on job performance using two measures of productivity loss: (1) a self-reported measure of health-related presenteeism and (2) an objective measure of absenteeism. A cross-sectional survey using a Health Risk Appraisal (HRA) to evaluate self-reported presenteeism and the prevalence of 12 health risks and eight medical conditions. Employees (n=224) of a private insurance provider in Australia. A Health Risk Appraisal (HRA) questionnaire was used to evaluate self-reported presenteeism on different aspects of job demands and to assess the prevalence of 12 health risks and eight medical conditions. Illness absent hours were obtained from company administrative records. Increased presenteeism was significantly associated with high stress, life dissatisfaction, and back pain, while increased illness absenteeism was significantly associated with overweight, poor perception of health, and diabetes. Excess presenteeism associated with excess health risks (productivity loss among those with medium- or high-risk status compared to those with low-risk status) was independently calculated at 19.0% for presenteeism and 12.8% for illness absenteeism. This study demonstrates an association between health metrics and self-reported work impairment (presenteeism) and measured absenteeism. The study provides a first indication of the potential benefits of health promotion programming to Australian employees in improving health and to the corporation in minimizing health-related productivity loss.

Correlation between Spectral Optical Coherence Tomography and Fundus Autofluorescence at the margins of Geographic Atrophy

PubMed Central

Brar, Manpreet; Kozak, Igor; Cheng, Lingyun; Bartsch, Dirk-Uwe G.; Yuson, Ritchie; Nigam, Nitin; Oster, Stephen F.; Mojana, Francesca; Freeman, William R.

2009-01-01

Purpose We studied the appearance of margins of Geographic atrophy in high- resolution optical coherence tomography (OCT) images and correlate those changes with fundus autofluorescence imaging. Design Retrospective observational case study. Methods Patients with geographic atrophy secondary to dry age related macular degeneration (ARMD) were assessed by means of Spectral Domain OCT (Spectralis HRA/OCT; Heidelberg Engineering, Heidelberg, Germany or OTI, Inc, Toronto, Canada) as well as Autofluoresence Imaging (HRA or Spectralis Heidelberg Engineering, Heidelberg, Germany): The outer retinal layer alterations were analyzed in the junctional zone between normal retina and atrophic retina, and correlated with corresponding fundus autofluorescence. Results 23 eyes of 16 patients aged between 62 years to 96 years were examined. There was a significant association between OCT findings and the fundus autofluorescence findings(r=0.67, p<0.0001). Severe alterations of the outer retinal layers at margins on Spectral OCT correspond significantly to increased autofluorescence; Smooth margins on OCT correspond significantly to normal fundus autofluorescence. (Kappa-0.7348, p<0.0001). Conclusion Spectral OCT provides in vivo insight into the pathogenesis of geographic atrophy and its progression. Visualization of reactive changes in the retinal pigment epithelial cells at the junctional zone and correlation with increased fundus autofluorescence; secondary to increased lipofuscin may together serve as determinants of progression of geographic atrophy. PMID:19541290

DNA Barcoding of Zooplankton in the Hampton Roads Area: A Biodiversity Assessment

NASA Astrophysics Data System (ADS)

Salcedo, A.; Rodríguez, Á. E.; Gibson, D. M.

2016-02-01

The study of zooplankton biodiversity and distribution is crucial to understand oceanic ecosystems and anticipate the effects of climate change. Previously, identification of zooplankton relied in morphological identification employed by expert taxonomists. DNA barcoding, a technique that uses the mitochondrial DNA (mtDNA) Cytochrome Oxidase 1 (CO1) gene is widely used for taxonomic identification. Thus, this molecular technique will be used to begin a detailed characterization of zooplankton diversity, abundance and community structure in the Hampton Roads Area (HRA). Stations 1 (Jones Creek) and 3 (lower Chesapeake Bay) were sampled in June 19, 2015. Stations 1, 2 (James River), and 3 were sampled in September 2015. Zooplankton samples were collected in triplicates with a 0.5m, 200 µm mesh net. Physical parameters (dissolved oxygen, salinity, temperature and, water transparency) were measured. Species identified as Opistonema oglinum (Atlantic Thread Herring) and Paracalanus parvus copepods were found at station 3; Anchoa mitchilli and Acartia tonsa copepods were found at stations 1 and 3. This study indicates that mtDNA-CO1 barcoding is suitable to identify zooplankton to the species level and helps validate DNA barcoding as a faster, more accurate taxonomic approach. The long term objective of this project is to provide a comprehensive assessment of zooplankton in the HRA and to generate a reference record for broad monitoring programs; vital for a better understanding and management of ecologically and commercially important species.

[Prevalence of HPV-induced lesions in the anal canal among women with cervical intraepithelial neoplasia 2 and 3: cross-sectional study].

PubMed

Heráclio, Sandra de Andrade; de Araujo, Thaís Antunes; Souza, Alex Sandro Rolland; Cahen, Kristiane; Lima Junior, Sergio Ferreira; de Souza, Paulo Roberto Eleutério; Amorim, Melania Maria Ramos

2015-10-01

To determine the prevalence of HPV-induced lesions in the anal canal of women with cervical intraepithelial neoplasia (CIN) grade 2/3. A cross-sectional study was carried out from December 2008 to June 2009, in Pernambuco, northeastern Brazil. Only women with grade 2/3 CIN were included, and those who could not undergo anoscopy during their first visit were excluded. A cyttobrush was used for sample collection in order to identify HPV DNA through PCR and anal cytology. An anal biopsy was obtained in cases of abnormal anal cytology or major alterations in high resolution anoscopy (HRA). Thirty-two percent (n=37/115) of HRA were normal and 63.5% (n=73/115) showed acetowhite epithelium. Twenty-two percent (n=26/115) of anal cytologies were abnormal. Among the latter, 12.2% (n=14/26) were low-grade anal intraepithelial lesions and 3.4% (n=4/26) were high-grade anal intraepithelial lesions. Twenty-two anal biopsies were performed, 13.7% of which (n=3/22) were grade 2 anal intraepithelial neoplasia (AIN2) and 9% (n=2/22) were grade 3 AIN. Th HPV DNA was identified in 72.1% of cases (n=83/115). Women with CIN grade 2/3 showed a high prevalence of anal HPV infection and HPV-induced lesions.

Color Doppler sonography and angioscintigraphy in hepatic Hodgkin’s lymphoma

PubMed Central

Stojković, Mirjana V; Artiko, Vera M; Radoman, Irena B; Knežević, Slavko J; Lukić, Snezana M; Kerkez, Mirko D; Lekić, Nebojsa S; Antić, Andrija A; Žuvela, Marinko M; Ranković, Vitomir I; Petrović, Milorad N; Šobić, Dragana P; Obradović, Vladimir B

2009-01-01

AIM: To estimate the characteristics of Color Doppler findings and the results of hepatic radionuclide angiography (HRA) in secondary Hodgkin’s hepatic lymphoma. METHODS: The research included patients with a diagnosis of Hodgkin’s lymphoma with metastatic focal lesions in the liver and controls. Morphologic characteristics of focal liver lesions and hemodynamic parameters were examined by pulsed and Color Doppler in the portal, hepatic and splenic veins were examined. Hepatic perfusion index (HPI) estimated by HRA was calculated. RESULTS: In the majority of patients, hepatomegaly was observed. Lesions were mostly hypoechoic and mixed, solitary or multiple. Some of the patients presented with dilated splenic veins and hepatofugal blood flow. A pulse wave was registered in the centre and at the margins of lymphoma. The average velocity of the pulse wave was higher at the margins (P > 0.05). A continuous venous wave was found only at the margins of lymphoma. There was no linear correlation between lymphoma size and velocity of pulse and continuous wave (r = 390, P < 0.01). HPI was significantly lower in patients with lymphomas than in controls (P < 0.05), pointing out increased arterial perfusion in comparison to portal perfusion. CONCLUSION: Color Doppler ultrasonography is a sensitive method for the detection of neovascularization in Hodgkin’s hepatic lymphoma and estimation of its intensity. Hepatic radionuclide angiography can additionally help in the assesment of vascularisation of liver lesions. PMID:19598303

TPH-contaminated Mexican refinery soil: health risk assessment and the first year of changes.

PubMed

Iturbe, Rosario; Flores, Rosa M; Flores, Carlos R; Torres, Luis G

2004-02-01

The soil of a coastal Mexican refinery is quite contaminated, especially by hydrocarbons, with detected concentrations up to 130000 mg kg(-1) as TPHs (total petroleum hydrocarbons). The main sources of contamination are pipelines, valves, and old storage tanks, besides the land disposal of untreated hydrocarbon sediments derived from the cleaning of storage tanks. A health risk assessment (HRA) was carried out in order to measure the risk hazard indexes and clean-up standards for the refinery soil. HRA suggested the following actions to be taken: benzene concentrations must be reduced in eight of the 16 studied refinery zones to 0.0074-0.0078 mg kg(-1). Also, vanadium concentration must be reduced in two zones up to a concentration of 100 mg kg(-1). In only one of all of the studied zones, benzo(a)pyrene concentration must be reduced to 0.1 mg kg(-1). After 1 yr, TPHs showed a diminution of about 52%. Even though TPHs concentrations were variable, during 1999 the average concentrations were as much as 15.5 times the goal concentration. For year 2000, TPHs concentrations were only 7.4-fold the proposed value. For the 1999-2000 period, PAHs (polycyclic aromatic hydrocarbons) concentrations decreased by 82%. Some PAHs with 2, 3, 4, and 5 aromatic rings were removed up to 100% values.

The effectiveness and cost-effectiveness of a rural employer-based wellness program.

PubMed

Saleh, Shadi S; Alameddine, Mohamad S; Hill, Dan; Darney-Beuhler, Jessica; Morgan, Ann

2010-01-01

The cost-effectiveness of employer-based wellness programs has been previously investigated with favorable financial and nonfinancial outcomes being detected. However, these investigations have mainly focused on large employers in urban settings. Very few studies examined wellness programs offered in rural settings. This paper aims to explore the effectiveness and cost-effectiveness of a rural employer-based wellness program. Six rural employers were categorized into 3 groups: a control group and 2 intervention groups with varying degrees of wellness activities. Participants were asked to complete an annual health risk assessment (HRA) that addressed 16 wellness areas. At the conclusion of 4 years, HRA and effectiveness data were utilized to examine program effectiveness and combined with program costs to estimate cost-effectiveness. The "Coaching and Referral" group-the highest in intensity of participant engagement-exhibited superior improvement in several wellness areas and in percentage of employees with good health indicators compared to the control and the Trail Marker, lower-intensity intervention groups. However, the Trail Markers had more favorable cost-effectiveness ratios. Rural worksite wellness programs have shown great potential in their effectiveness and cost-effectiveness. Such programs need not be too aggressive, tedious, and costly to generate a favorable return for employers and funders. However, employers should be encouraged to experiment with different levels of wellness program intensities until a more favorable outcome can be realized.

Partnership in employee health. A workplace health program for British Columbia Public Service Agency (Canada).

PubMed

Tarride, J E; Harrington, K; Balfour, R; Simpson, P; Foord, L; Anderson, L; Lakey, W

2011-01-01

To evaluate the My Health Matters! (MHM) program, a multifaceted workplace intervention relying on education and awareness, early detection and disease management with a focus on risk factors for metabolic syndrome. The MHM program was offered to 2,000 public servants working in more than 30 worksites in British Columbia, Canada. The MHM program included a health risk assessment combined with an opportunity to attend an on-site screening and face-to-face call back visits and related on-site educational programs. Clinical and economic outcomes were collected over time in this one-year prospective study coupled with administrative and survey data. Forty three per cent of employees (N=857) completed the online HRA and 23 per cent (N=447) attended the initial clinical visit with the nurse. Risk factors for metabolic syndrome were identified in more than half of those attending the clinical visit. The number of risk factors significantly decreased by 15 per cent over six months (N=141). The cost per employee completing the HRA was $205 while the cost per employee attending the initial clinical visit was $394. Eighty-two per cent of employees would recommend the program to other employers. This study supports that workplace interventions are feasible, sustainable and valued by employees. As such, this study provides a new framework for implementing and evaluating workplace interventions focussing on metabolic disorders.

Design and Performance of the ARIANNA HRA-3 Neutrino Detector Systems

NASA Astrophysics Data System (ADS)

Barwick, S. W.; Berg, E. C.; Besson, D. Z.; Duffin, T.; Hanson, J. C.; Klein, S. R.; Kleinfelder, S. A.; Ratzlaff, K.; Reed, C.; Roumi, M.; Stezelberger, T.; Tatar, J.; Walker, J.; Young, R.; Zou, L.

2015-10-01

We report on the development, installation, and operation of the first three of seven stations deployed at the ARIANNA site's pilot Hexagonal Radio Array (HRA) in Antarctica. The primary goal of the ARIANNA project is to observe ultrahigh energy ( > 100 PeV) cosmogenic neutrino signatures using a large array of autonomous stations, each 1 km apart on the surface of the Ross Ice Shelf. Sensing radio emissions of 100 MHz to 1 GHz, each station in the array contains RF antennas, amplifiers, 1.92 G-sample/s, 850 MHz bandwidth signal acquisition circuitry, pattern-matching trigger capabilities, an embedded CPU, 32 GB of solid-state data storage, and long-distance wireless and satellite communications. Power is provided by the sun and buffered in LiFePO 4 storage batteries, and each station consumes an average of 7 W of power. Operation on solar power has resulted in ≥58% per calendar-year live-time. The station's pattern-trigger capabilities reduce the trigger rates to a few milli-Hertz with 4-sigma voltage thresholds while retaining good stability and high efficiency for neutrino signals. The timing resolution of the station has been found to be 0.049 ns, RMS, and the angular precision of event reconstructions of signals bounced off of the sea-ice interface of the Ross Ice Shelf ranged from 0.14 to 0.17 °.

Development of a risk assessment tool for projecting individualized probabilities of developing breast cancer for Chinese women.

PubMed

Wang, Yuan; Gao, Ying; Battsend, Munkhzul; Chen, Kexin; Lu, Wenli; Wang, Yaogang

2014-11-01

The optimal approach regarding breast cancer screening for Chinese women is unclear due to the relative low incidence rate. A risk assessment tool may be useful for selection of high-risk subsets of population for mammography screening in low-incidence and resource-limited developing country. The odd ratios for six main risk factors of breast cancer were pooled by review manager after a systematic research of literature. Health risk appraisal (HRA) model was developed to predict an individual's risk of developing breast cancer in the next 5 years from current age. The performance of this HRA model was assessed based on a first-round screening database. Estimated risk of breast cancer increased with age. Increases in the 5-year risk of developing breast cancer were found with the existence of any of included risk factors. When individuals who had risk above median risk (3.3‰) were selected from the validation database, the sensitivity is 60.0% and the specificity is 47.8%. The unweighted area under the curve (AUC) was 0.64 (95% CI = 0.50-0.78). The risk-prediction model reported in this article is based on a combination of risk factors and shows good overall predictive power, but it is still weak at predicting which particular women will develop the disease. It would be very helpful for the improvement of a current model if more population-based prospective follow-up studies were used for the validation.

Targeting aminopeptidase N (APN/CD13) with cyclic-imide peptidomimetics derivative CIP-13F inhibits the growth of human ovarian carcinoma cells.

PubMed

Cui, Shu-Xiang; Qu, Xian-Jun; Gao, Zu-Hua; Zhang, Yu-Sheng; Zhang, Xiao-Fan; Zhao, Cui-Rong; Xu, Wen-Fang; Li, Qian-Bin; Han, Jin-Xiang

2010-06-28

Aminopeptidase N (APN/CD13) is an essential peptidase involved in the process of tumor growth, metastasis and angiogenesis. Inhibition of APN/CD13 may be an effective strategy for cancer treatment. CIP-13F is a cyclic-imide peptidomimetics compound designed to fit the active pockets S1 and S'1 of APN/CD13 that act in tumor proliferation. Our aim in this study was to evaluate the efficacy of CIP-13F as a candidate compound for cancer treatment. The experiments were performed on the human ovarian carcinoma (OVCA) ES-2 and HRA cell lines, which have high and low levels of APN/CD13 respectively. CIP-13F significantly blocked APN/CD13 activity on the surface of ES-2 cells as measured by quantitating the enzymatic cleavage of the substrate l-leucine-p-nitroanilide. CIP-13F effectively inhibited ES-2 cell growth and migration without significant cytotoxic effect. In contrast, CIP-13F did not significantly inhibit HRA cell growth, indicating that CIP-13F may inhibit ES-2 cell growth via suppression of APN/CD13. The suppression of APN/CD13 was also observed by using the assays of flow cytometry and Western blot analysis. Further, the inhibitory effects of CIP-13F on APN/CD13 and on ES-2 proliferation were supported by the induction of ES-2 apoptosis. CIP-13F-treated ES-2 cells resulted apoptotic characteristics, such as induction of externalization of phosphatidylserine and DNA laddering fragment. The activation of caspase-3 and poly ADP-ribose polymerase (PARP) was also enhanced. The inhibitory effects of CIP-13F on APN/CD13 expression and on ES-2 proliferation were confirmed in mice bearing ES-2 xenografts. CIP-13F delayed the growth of ES-2 xenografts in mice after 2 weeks of vena caudalis injection. These results suggest that CIP-13F has a high inhibitory effect on the growth of OVCA cells via decreasing the activity and expression of APN/CD13. Copyright 2009 Elsevier Ireland Ltd. All rights reserved.

EEG complexity as a biomarker for autism spectrum disorder risk

PubMed Central

2011-01-01

Background Complex neurodevelopmental disorders may be characterized by subtle brain function signatures early in life before behavioral symptoms are apparent. Such endophenotypes may be measurable biomarkers for later cognitive impairments. The nonlinear complexity of electroencephalography (EEG) signals is believed to contain information about the architecture of the neural networks in the brain on many scales. Early detection of abnormalities in EEG signals may be an early biomarker for developmental cognitive disorders. The goal of this paper is to demonstrate that the modified multiscale entropy (mMSE) computed on the basis of resting state EEG data can be used as a biomarker of normal brain development and distinguish typically developing children from a group of infants at high risk for autism spectrum disorder (ASD), defined on the basis of an older sibling with ASD. Methods Using mMSE as a feature vector, a multiclass support vector machine algorithm was used to classify typically developing and high-risk groups. Classification was computed separately within each age group from 6 to 24 months. Results Multiscale entropy appears to go through a different developmental trajectory in infants at high risk for autism (HRA) than it does in typically developing controls. Differences appear to be greatest at ages 9 to 12 months. Using several machine learning algorithms with mMSE as a feature vector, infants were classified with over 80% accuracy into control and HRA groups at age 9 months. Classification accuracy for boys was close to 100% at age 9 months and remains high (70% to 90%) at ages 12 and 18 months. For girls, classification accuracy was highest at age 6 months, but declines thereafter. Conclusions This proof-of-principle study suggests that mMSE computed from resting state EEG signals may be a useful biomarker for early detection of risk for ASD and abnormalities in cognitive development in infants. To our knowledge, this is the first demonstration of an information theoretic analysis of EEG data for biomarkers in infants at risk for a complex neurodevelopmental disorder. PMID:21342500

Relationship between Escherichia coli virulence factors and postpartum metritis in dairy cows.

PubMed

Kassé, F N; Fairbrother, J M; Dubuc, J

2016-06-01

The objectives of this study were to report the prevalence of Escherichia coli and Trueperella pyogenes in the uterus of postpartum dairy cows before the onset of postpartum metritis (PPM) and to quantify their association with subsequent occurrence of PPM, to quantify the association between the presence of genes encoding E. coli virulence factors (VF) and PPM, and to determine the accuracy of using early postpartum uterine bacteriology results (bacteria and VF) to identify cows at risk of PPM. A prospective cohort study was conducted on 3 commercial dairy farms. Uterine swabs were collected from 371 Holstein dairy cows (3 commercial herds) at 1 to 7d in milk and submitted to the laboratory for identification of E. coli, T. pyogenes, and E. coli VF. A total of 40 VF were tested using the radioactive probe hybridization method. Postpartum metritis was defined as the presence of a fetid watery red-brown uterine discharge, associated with fever (rectal temperature >39.5°C), and systemic signs of illness (dullness, reduced appetite, and milk production). Surveillance of PPM was done by trained farmers blinded to laboratory results and cows were followed until 21d in milk. Statistical analyses were conducted using 2×2 tables and mixed logistical regression models. Prevalences of E. coli, T. pyogenes, and PPM were 42, 34, and 15%, respectively. A total of 32 VF were found in E. coli isolates. Most prevalent VF were extraintestinal pathogenic genes such as fimH (89%), hlyE (87%), and iss (70%). Cows positive for intrauterine E. coli were 3.2 times more likely to have subsequent PPM compared with bacteriologically negative cows. Cows with VF hra1 in their uterus were 2.7 times more likely to have PPM than cows positive for E. coli and negative for hra1 and 5.9 times more likely than bacteriologically negative cows. Cows with VF kpsMTII in their uterus were 3.2 times more likely to have PPM than cows positive for E. coli and negative for kpsMTII and 6.2 times more likely than bacteriologically negative cows. Using E. coli, hra1, and kpsMTII as predictors for subsequent PPM, positive predictive values were 23, 31, and 42%, respectively, whereas the negative predictive values were 91, 80, and 78%, respectively. Overall, these results showed that E. coli and some VF were associated with PPM. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Drinking and other risk taking behaviors of enlisted male soldiers in the US Army

PubMed Central

Williams, Jeffrey O.; Bell, Nicole S.; Amoroso, Paul J.

2007-01-01

High-risk drinking is among the top three prevention priorities of the Department of Defense. Research suggests that enlisted male soldiers are particularly at risk for unhealthy drinking behaviors. 292,023 enlisted male soldiers who responded to a Health Risk Appraisal (HRA) survey between 1990 and 1998 were dichotomized into high and low-risk drinking groups. Logistic regression analysis showed that high-risk drinkers wore seatbelts less frequently, were more likely to drive > 15 mph over the speed limit, and to smoke more than 20 cigarettes/day. This high-risk group was predominately young (< 25), Caucasian, high school educated or less, and most likely employed as infantrymen or craftsworkers. The two highest risk occupational groups (infantrymen and craftsworkers) differ from each other, and from other Army occupations. Intervention programs should include safe driving habits and smoking cessation, as well as high-risk drinking, and should be tailored to the specific needs of the group at highest risk. PMID:12441578

Iris autofluorescence in Fuchs' heterochromic uveitis.

PubMed

Liu, Qian; Jia, Yading; Zhang, Suhua; Xie, Juan; Chang, Xin; Hou, Jia; Li, Gaiyun; Koch, Douglas D; Wang, Li

2016-10-01

To explore the characteristic autofluorescence patterns of iris depigmentation in eyes diagnosed with Fuchs' heterochromic uveitis (FHU). Near-infrared autofluorescence images and colour images of iris were taken in 21 eyes of 21 patients with FHU, 30 eyes of 15 normal subjects, 30 eyes of 15 normal age-related iris atrophy and 33 eyes of 20 patients with uveitis other than FHU. The confocal scanning laser ophthalmoscope (Heidelberg Retina Angiograph 2, HRA2) was used for melanin-related autofluorescence imaging. The indocyanine green angiography mode of HRA2 was applied for near-infrared laser imaging, and the wavelength of the excitation laser was 795 nm. Iris colour images were also taken with the slit lamp. In normal iris, moderately intense autofluorescence was noted for the pigment ruff at the pupillary border, the crests in the pupillary zone and the collarette; and there was mild autofluorescence in the ciliary zone. In eyes with age-related iris atrophy and uveitis, much less autofluorescence was seen than the healthy normal irides. In eyes with FHU, there was moderate but discontinuous autofluorescence in the pigment ruff, a petaloid pattern of autofluorescence in the pupillary zone, moderate autofluorescence in the collarette and reticular pattern of autofluorescence in the ciliary zone. Characteristic autofluorescence patterns appeared in eyes diagnosed with FHU. Near-infrared autofluorescence is a promising objective technique to document the iris changes in FHU. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Assessment of American Heart Association's Ideal Cardiovascular Health Metrics Among Employees of a Large Healthcare Organization: The Baptist Health South Florida Employee Study.

PubMed

Ogunmoroti, Oluseye; Younus, Adnan; Rouseff, Maribeth; Spatz, Erica S; Das, Sankalp; Parris, Don; Aneni, Ehimen; Holzwarth, Leah; Guzman, Henry; Tran, Thinh; Roberson, Lara; Ali, Shozab S; Agatston, Arthur; Maziak, Wasim; Feldman, Theodore; Veledar, Emir; Nasir, Khurram

2015-07-01

Healthcare organizations and their employees are critical role models for healthy living in their communities. The American Heart Association (AHA) 2020 impact goal provides a national framework that can be used to track the success of employee wellness programs with a focus on improving cardiovascular (CV) health. This study aimed to assess the CV health of the employees of Baptist Health South Florida (BHSF), a large nonprofit healthcare organization. HRAs and wellness examinations can be used to measure the cardiovascular health status of an employee population. The AHA's 7 CV health metrics (diet, physical activity, smoking, body mass index, blood pressure, total cholesterol, and blood glucose) categorized as ideal, intermediate, or poor were estimated among employees of BHSF participating voluntarily in an annual health risk assessment (HRA) and wellness fair. Age and gender differences were analyzed using χ(2) test. The sample consisted of 9364 employees who participated in the 2014 annual HRA and wellness fair (mean age [standard deviation], 43 [12] years, 74% women). Sixty (1%) individuals met the AHA's definition of ideal CV health. Women were more likely than men to meet the ideal criteria for more than 5 CV health metrics. The proportion of participants meeting the ideal criteria for more than 5 CV health metrics decreased with age. A combination of HRAs and wellness examinations can provide useful insights into the cardiovascular health status of an employee population. Future tracking of the CV health metrics will provide critical feedback on the impact of system wide wellness efforts as well as identifying proactive programs to assist in making substantial progress toward the AHA 2020 Impact Goal. © 2015 Wiley Periodicals, Inc.

Synergic effects of renin and aldosterone on right ventricular function in hypertension: a tissue Doppler study.

PubMed

Gregori, Mario; Giammarioli, Benedetta; Tocci, Giuliano; Befani, Alberto; Ciavarella, Giuseppino Massimo; Ferrucci, Andrea; Paneni, Francesco

2015-12-01

Right ventricular dysfunction (RVD) is associated with poor cardiovascular outcome. The renin-angiotensin-aldosterone system is involved in alterations of the left ventricular geometry and function. Detrimental effects of the renin-angiotensin-aldosterone system on the right ventricular function are being postulated, but data supporting this assumption are still lacking. The aim of the study was to assess the impact of hyperreninemia, hyperaldosteronism or their combination on right ventricular function in hypertensive individuals. Plasma renin activity (PRA) and plasma aldosterone concentrations (PACs) were measured in 116 hypertensive patients, divided as follows: normal PRA and PAC (n = 38); high PRA and normal PAC (hypereninemia) (n = 26); normal PRA and high PAC (hyperaldosternism) (n = 27); high PRA and PAC (HRA) (n = 25). Echocardiographic evaluation of the left and right ventricles (RV), including tissue Doppler imaging, was performed. RVD was identified by tissue Doppler Imaging-derived Myocardial Performance Index, calculated with a multisegmental approach. Indices of the right ventricular structure and function, as well as the prevalence of RVD, were higher in hyperreninemia and hyperaldosternism groups as compared with the normal group, and a further increase was observed in the HRA patients. Regression models showed a similar risk of RVD in the hyperreninemia and hyperaldosternism patients, regardless of systemic and pulmonary pressure, as well as left ventricular dysfunction. Notably, patients with both hyperreninemia and hyperaldosternism exhibited the strongest association with RVD as compared with patients with only hyperreninemia or hyperaldosternism. Isolated hyperreninemia or hyperaldosternism determines a similar impairment of the right ventricular function, whereas their combination is further detrimental. Renin and aldosterone may represent early biomarkers of right ventricular dysfunction in hypertension.

Decentralized colonoscopic surveillance with high patient compliance prevents hereditary and familial colorectal cancer.

PubMed

Sjöström, Olle; Lindholm, Lars; Tavelin, Björn; Melin, Beatrice

2016-10-01

Although colonoscopic surveillance is recommended both for individuals with known hereditary colorectal cancer (HCRC) syndromes and those with a more moderate familial colorectal cancer (FCRC) history, the evidence for the benefits of surveillance is limited and surveillance practices vary. This study evaluates the preventive effect for individuals with a family history of CRC of decentralized colonoscopic surveillance with the guidance of a cancer prevention clinic. We performed a population based prospective study of 261 patients with HCRC or FCRC, recorded in the colonoscopic surveillance registry at the Cancer genetics clinic, University Hospital of Umeå, Sweden. Colonoscopic surveillance was conducted every second (HCRC) or fifth (FCRC) year at local hospitals in Northern Sweden. Main outcome measures were findings of high-risk adenomas (HRA) or CRC, and patient compliance to surveillance. Estimations of the expected numbers of CRC without surveillance were made. During a total of 1256 person years of follow-up, one case of CRC was found. The expected numbers of cancers in the absence of surveillance was between 9.5 and 10.5, resulting in a standardized incidence ratio, observed versus expected cases of CRC, between 0.10 (CI 95 % 0.0012-0.5299) and 0.11 (CI 95 % 0.0014-0.5857). No CRC mortality was reported, but three patients needed surgical intervention. HRA were found in 5.9 % (14/237) of the initial and in 3.4 % (12/356) of the follow-up colonoscopies. Patient compliance to the surveillance program was 90 % as 597 of the planned 662 colonoscopies were performed. The study concludes that colonoscopic surveillance with high patient compliance to the program is effective in preventing CRC when using a decentralized method for colonoscopy surveillance with the guidance of a cancer prevention clinic.

Squamous cell dysplasia in the proximal rectum of three patients treated for ulcerative colitis on immunomodulators.

PubMed

Connolly, James G; Goldstone, Stephen E

2017-05-01

Anal canal high-grade squamous intraepithelial lesion (HSIL) is the precursor to anal cancer. Immunocompromised patients are at increased risk and disease is usually within 3 cm from the anal verge. High-resolution anoscopy (HRA) with an 8-cm anoscope is used to identify and guide cautery treatment of HSIL. We report three patients with a long-term history of ulcerative colitis (UC) treated with systemic immunomodulators who developed proximally located rectal HSIL. Two patients were HIV-negative women, 63 and 48 years old, and the third was a 51-year-old HIV-positive man with underlying UC for 10, 16, and 3 years, respectively. They each presented with a HPV-positive HSIL visibly extending above the limits of the anoscope used for HRA. None developed cancer. All had episodes of active UC. It is unclear what causative role systemic immunomodulators play in predisposing UC patients to proximal HSIL. HSIL probably developed on a tongue of HPV-infected squamous epithelium growing proximally over the inflamed rectum. Islands developed when areas of squamous epithelium degenerated, creating skip areas. This study highlights the potential for HSIL to extend into the rectum either as a contiguous patch or isolated islands and the need for heightened surveillance in patients with extensive anal canal HSIL treated with immunodulator therapy. HSIL identified at the limit of the anoscope should be investigated further with colonoscopy, and argon plasma coagulation (APC) ablation can serve as an effective treatment option. Patients are at risk for stricture, but it is unclear what role the UC or the ablation played in stricture formation.

A Hybrid Memetic Framework for Coverage Optimization in Wireless Sensor Networks.

PubMed

Chen, Chia-Pang; Mukhopadhyay, Subhas Chandra; Chuang, Cheng-Long; Lin, Tzu-Shiang; Liao, Min-Sheng; Wang, Yung-Chung; Jiang, Joe-Air

2015-10-01

One of the critical concerns in wireless sensor networks (WSNs) is the continuous maintenance of sensing coverage. Many particular applications, such as battlefield intrusion detection and object tracking, require a full-coverage at any time, which is typically resolved by adding redundant sensor nodes. With abundant energy, previous studies suggested that the network lifetime can be maximized while maintaining full coverage through organizing sensor nodes into a maximum number of disjoint sets and alternately turning them on. Since the power of sensor nodes is unevenly consumed over time, and early failure of sensor nodes leads to coverage loss, WSNs require dynamic coverage maintenance. Thus, the task of permanently sustaining full coverage is particularly formulated as a hybrid of disjoint set covers and dynamic-coverage-maintenance problems, and both have been proven to be nondeterministic polynomial-complete. In this paper, a hybrid memetic framework for coverage optimization (Hy-MFCO) is presented to cope with the hybrid problem using two major components: 1) a memetic algorithm (MA)-based scheduling strategy and 2) a heuristic recursive algorithm (HRA). First, the MA-based scheduling strategy adopts a dynamic chromosome structure to create disjoint sets, and then the HRA is utilized to compensate the loss of coverage by awaking some of the hibernated nodes in local regions when a disjoint set fails to maintain full coverage. The results obtained from real-world experiments using a WSN test-bed and computer simulations indicate that the proposed Hy-MFCO is able to maximize sensing coverage while achieving energy efficiency at the same time. Moreover, the results also show that the Hy-MFCO significantly outperforms the existing methods with respect to coverage preservation and energy efficiency.

Adherence to cancer screening guidelines and predictors of improvement among participants in the Kansas State Employee Wellness Program.

PubMed

Hui, Siu-kuen Azor; Engelman, Kimberly K; Shireman, Theresa I; Ellerbeck, Edward F

2013-07-11

Employee wellness programs (EWPs) have been used to implement worksite-based cancer prevention and control interventions. However, little is known about whether these programs result in improved adherence to cancer screening guidelines or how participants' characteristics affect subsequent screening. This study was conducted to describe cancer screening behaviors among participants in a state EWP and identify factors associated with screening adherence among those who were initially nonadherent. We identified employees and their dependents who completed health risk assessments (HRAs) as part of the Kansas state EWP in both 2008 and 2009. We examined baseline rates of adherence to cancer screening guidelines in 2008 and factors associated with adherence in 2009 among participants who were initially nonadherent. Of 53,095 eligible participants, 13,222 (25%) participated in the EWP in 2008 and 6,205 (12%) participated in both years. Among the multiyear participants, adherence was high at baseline to screening for breast (92.5%), cervical (91.8%), and colorectal cancer (72.7%). Of participants who were initially nonadherent in 2008, 52.4%, 41.3%, and 33.5%, respectively, became adherent in the following year to breast, cervical, and colorectal cancer screening. Suburban/urban residence and more frequent doctor visits predicted adherence to breast and colorectal cancer screening guidelines. The effectiveness of EWPs for increasing cancer screening is limited by low HRA participation rates, high rates of adherence to screening at baseline, and failure of nonadherent participants to get screening. Improving overall adherence to cancer screening guidelines among employees will require efforts to increase HRA participation, stronger interventions for nonadherent participants, and better access to screening for rural employees.

Adherence to Cancer Screening Guidelines and Predictors of Improvement Among Participants in the Kansas State Employee Wellness Program

PubMed Central

Engelman, Kimberly K.; Shireman, Theresa I.; Ellerbeck, Edward F.

2013-01-01

Introduction Employee wellness programs (EWPs) have been used to implement worksite-based cancer prevention and control interventions. However, little is known about whether these programs result in improved adherence to cancer screening guidelines or how participants’ characteristics affect subsequent screening. This study was conducted to describe cancer screening behaviors among participants in a state EWP and identify factors associated with screening adherence among those who were initially nonadherent. Methods We identified employees and their dependents who completed health risk assessments (HRAs) as part of the Kansas state EWP in both 2008 and 2009. We examined baseline rates of adherence to cancer screening guidelines in 2008 and factors associated with adherence in 2009 among participants who were initially nonadherent. Results Of 53,095 eligible participants, 13,222 (25%) participated in the EWP in 2008 and 6,205 (12%) participated in both years. Among the multiyear participants, adherence was high at baseline to screening for breast (92.5%), cervical (91.8%), and colorectal cancer (72.7%). Of participants who were initially nonadherent in 2008, 52.4%, 41.3%, and 33.5%, respectively, became adherent in the following year to breast, cervical, and colorectal cancer screening. Suburban/urban residence and more frequent doctor visits predicted adherence to breast and colorectal cancer screening guidelines. Conclusion The effectiveness of EWPs for increasing cancer screening is limited by low HRA participation rates, high rates of adherence to screening at baseline, and failure of nonadherent participants to get screening. Improving overall adherence to cancer screening guidelines among employees will require efforts to increase HRA participation, stronger interventions for nonadherent participants, and better access to screening for rural employees. PMID:23845176

The value of a transformation zone component in anal cytology to detect HSIL.

PubMed

Roberts, Jennifer M; Jin, Fengyi; Thurloe, Julia K; Ekman, Deborah; Adams, Marjorie K; McDonald, Ross L; Biro, Clare; Poynten, I Mary; Grulich, Andrew E; Farnsworth, Annabelle

2016-08-01

In a cytology-based screening program intended to prevent anal cancer, the anal transformation zone (TZ) should be adequately sampled because it is the site most susceptible to the development of the cancer precursor, high-grade squamous intraepithelial lesion (HSIL). An adequate TZ component is defined as comprising at least 10 rectal columnar or squamous metaplastic cells. In the current study, the authors examined whether the presence of a TZ component in anal cytology correlated with the detection of histological HSIL. In a natural history study of anal human papillomavirus infection in homosexual men, all participants underwent liquid-based cytology and high-resolution anoscopy (HRA) with or without biopsy at each visit. True-negative cytology (negative cytology with non-HSIL biopsy or negative HRA), false-negative cytology (negative cytology with HSIL biopsy), and true-positive cytology (abnormal cytology with HSIL biopsy) were compared with regard to the presence or absence of a TZ component. Of 617 participants, baseline results included 155 true-positive results, 191 true-negative results, and 31 false-negative results. The absence of an adequate TZ component was found to be significantly higher for false-negative (32.3%) than for either true-positive (11.0%; P = .0034) or true-negative (13.1%; P = .0089) results. Significantly more false-negative cases lacked a TZ component compared with either true-positive or true-negative cases. TZ cells may be an important indicator of sample quality for anal cytology because, unlike cervical sampling, the anal canal is not visualized during cytology sampling. Cancer Cytopathol 2016;124:596-601. © 2016 American Cancer Society. © 2016 American Cancer Society.

Quantum dot labeling and tracking of cultured limbal epithelial cell transplants in-vitro

PubMed Central

Genicio, Nuria; Paramo, Juan Gallo; Shortt, Alex J.

2015-01-01

PURPOSE Cultured human limbal epithelial cells (HLEC) have shown promise in the treatment of limbal stem cell deficiency but little is known about their survival, behaviour and long-term fate post transplantation. The aim of this research was to evaluate, in-vitro, quantum dot (QDot) technology as a tool for tracking transplanted HLEC. METHODS In-vitro cultured HLEC were labeled with Qdot nanocrystals. Toxicity was assessed using live-dead assays. The effect on HLEC function was assessed using colony forming efficiency assays and expression of CK3, P63alpha and ABCG2. Sheets of cultured HLEC labeled with Qdot nanocrystals were transplanted onto decellularised human corneo-scleral rims in an organ culture model and observed to investigate the behaviour of transplanted cells. RESULTS Qdot labeling had no detrimental effect on HLEC viability or function in-vitro. Proliferation resulted in a gradual reduction in Qdot signal but sufficient signal was present to allow tracking of cells through multiple generations. Cells labeled with Qdots could be reliably detected and observed using confocal microscopy for at least 2 weeks post transplantation in our organ culture model. In addition it was possible to label and observe epithelial cells in intact human corneas using the Rostock corneal module adapted for use with the Heidelberg HRA. CONCLUSIONS This work demonstrates that Qdots combined with existing clinical equipment could be used to track HLEC for up to 2 weeks post transplantation, however, our model does not permit the assessment of cell labeling beyond 2 weeks. Further characterisation in in-vivo models are required. PMID:26024089

Health assessment instruments for people with intellectual disabilities-A systematic review.

PubMed

Bakker-van Gijssel, E J; Lucassen, P L B J; Olde Hartman, T C; van Son, L; Assendelft, W J J; van Schrojenstein Lantman-de Valk, H M J

2017-05-01

People with intellectual disabilities (ID) experience health disparities and are less likely to undergo recommended age- and gender-specific screening and health promotion. New diagnoses are frequently missed. Assessments with the aid of health assessment instruments are a way to address these problems. The aim of this review is to find the available health assessment instruments for people with ID used in primary care and evaluate their quality. We conducted an electronic literature search of papers published between January 2000 and May 2016. After a two-phase selection process (kappa: 0.81 and 0.77) we collected data from the 29 included peer-reviewed articles on the following four domains; development, clinimetric properties (i.e. validity, reliability, feasibility, acceptability), content (i.e. ID-related health problems, prevention and health promotion topics) and effectiveness of the instruments. We distinguished 20 different health assessment instruments. Limited information was found on the development of the instruments as well as on their clinimetric properties. The content of the instruments was rather diverse. The included papers agreed that health assessment instruments are effective. However, only three instruments evaluated effectiveness in a randomised controlled trial. Patients with ID, carers and general practitioners (GPs) generally appreciated the health assessment instruments. Two instruments, "Stay well and healthy -Health risk appraisal (SWH-HRA)"and the "Comprehensive Health Assessment Programme (CHAP)", appeared to have the highest quality. These instruments can be used to construct a health assessment instrument for people with ID that meets scientific standards. Copyright © 2017 Elsevier Ltd. All rights reserved.

Occupational and environmental health nursing in the era of consumer-directed health care.

PubMed

Sherman, Bruce; Click, Elizabeth

2007-05-01

Consumer-directed health care plans (CDHPs) present an opportunity to control health care costs. Health savings accounts (HSAs) and health reimbursement arrangements (HRAs) are two different approaches to providing pre-tax funding for CDHP enrollees. Each has a significant impact on the nature and business aspects of worksite health care. Worksite clinics can provide support via on-site education, expanded acute care services, and referral to other health-related benefits and resources for all CDHP enrollees. With attention to the type of employee health benefits funding support (HSA or HRA), occupational health nurses can maximize the effectiveness and value of worksite clinic services for CDHP enrollees.

Fully Automatic Segmentation of Fluorescein Leakage in Subjects With Diabetic Macular Edema

PubMed Central

Rabbani, Hossein; Allingham, Michael J.; Mettu, Priyatham S.; Cousins, Scott W.; Farsiu, Sina

2015-01-01

Purpose. To create and validate software to automatically segment leakage area in real-world clinical fluorescein angiography (FA) images of subjects with diabetic macular edema (DME). Methods. Fluorescein angiography images obtained from 24 eyes of 24 subjects with DME were retrospectively analyzed. Both video and still-frame images were obtained using a Heidelberg Spectralis 6-mode HRA/OCT unit. We aligned early and late FA frames in the video by a two-step nonrigid registration method. To remove background artifacts, we subtracted early and late FA frames. Finally, after postprocessing steps, including detection and inpainting of the vessels, a robust active contour method was utilized to obtain leakage area in a 1500-μm-radius circular region centered at the fovea. Images were captured at different fields of view (FOVs) and were often contaminated with outliers, as is the case in real-world clinical imaging. Our algorithm was applied to these images with no manual input. Separately, all images were manually segmented by two retina specialists. The sensitivity, specificity, and accuracy of manual interobserver, manual intraobserver, and automatic methods were calculated. Results. The mean accuracy was 0.86 ± 0.08 for automatic versus manual, 0.83 ± 0.16 for manual interobserver, and 0.90 ± 0.08 for manual intraobserver segmentation methods. Conclusions. Our fully automated algorithm can reproducibly and accurately quantify the area of leakage of clinical-grade FA video and is congruent with expert manual segmentation. The performance was reliable for different DME subtypes. This approach has the potential to reduce time and labor costs and may yield objective and reproducible quantitative measurements of DME imaging biomarkers. PMID:25634978

Fully automatic segmentation of fluorescein leakage in subjects with diabetic macular edema.

PubMed

Rabbani, Hossein; Allingham, Michael J; Mettu, Priyatham S; Cousins, Scott W; Farsiu, Sina

2015-01-29

To create and validate software to automatically segment leakage area in real-world clinical fluorescein angiography (FA) images of subjects with diabetic macular edema (DME). Fluorescein angiography images obtained from 24 eyes of 24 subjects with DME were retrospectively analyzed. Both video and still-frame images were obtained using a Heidelberg Spectralis 6-mode HRA/OCT unit. We aligned early and late FA frames in the video by a two-step nonrigid registration method. To remove background artifacts, we subtracted early and late FA frames. Finally, after postprocessing steps, including detection and inpainting of the vessels, a robust active contour method was utilized to obtain leakage area in a 1500-μm-radius circular region centered at the fovea. Images were captured at different fields of view (FOVs) and were often contaminated with outliers, as is the case in real-world clinical imaging. Our algorithm was applied to these images with no manual input. Separately, all images were manually segmented by two retina specialists. The sensitivity, specificity, and accuracy of manual interobserver, manual intraobserver, and automatic methods were calculated. The mean accuracy was 0.86 ± 0.08 for automatic versus manual, 0.83 ± 0.16 for manual interobserver, and 0.90 ± 0.08 for manual intraobserver segmentation methods. Our fully automated algorithm can reproducibly and accurately quantify the area of leakage of clinical-grade FA video and is congruent with expert manual segmentation. The performance was reliable for different DME subtypes. This approach has the potential to reduce time and labor costs and may yield objective and reproducible quantitative measurements of DME imaging biomarkers. Copyright 2015 The Association for Research in Vision and Ophthalmology, Inc.

Associations between Poor Sleep Quality and Stages of Change of Multiple Health Behaviors among Participants of Employee Wellness Program.

PubMed

Hui, Siu-Kuen Azor; Grandner, Michael A

2015-01-01

Using the Transtheoretical Model of behavioral change, this study evaluates the relationship between sleep quality and the motivation and maintenance processes of healthy behavior change. The current study is an analysis of data collected in 2008 from an online health risk assessment (HRA) survey completed by participants of the Kansas State employee wellness program (N=13,322). Using multinomial logistic regression, associations between self-reported sleep quality and stages of change (i.e. precontemplation, contemplation, preparation, action, maintenance) in five health behaviors (stress management, weight management, physical activities, alcohol use, and smoking) were analyzed. Adjusted for covariates, poor sleep quality was associated with an increased likelihood of contemplation, preparation, and in some cases action stage when engaging in the health behavior change process, but generally a lower likelihood of maintenance of the healthy behavior. The present study demonstrated that poor sleep quality was associated with an elevated likelihood of contemplating or initiating behavior change, but a decreased likelihood of maintaining healthy behavior change. It is important to include sleep improvement as one of the lifestyle management interventions offered in EWP to comprehensively reduce health risks and promote the health of a large employee population.

Risk selection into consumer-directed health plans: an analysis of family choices within large employers.

PubMed

McDevitt, Roland D; Haviland, Amelia M; Lore, Ryan; Laudenberger, Laura; Eisenberg, Matthew; Sood, Neeraj

2014-04-01

To identify the degree of selection into consumer-directed health plans (CDHPs) versus traditional plans over time, and factors that influence choice and temper risk selection. Sixteen large employers offering both CDHP and traditional plans during the 2004–2007 period, more than 200,000 families. We model CDHP choice with logistic regression; predictors include risk scores, in addition to family, choice setting, and plan characteristics. Additional models stratify by account type or single enrollee versus family. Risk scores, family characteristics, and enrollment decisions are derived from medical claims and enrollment files. Interviews with human resources executives provide additional data. CDHP risk scores were 74 percent of traditional plan scores in the first year, and this difference declined over time. Employer contributions to accounts and employee premium savings fostered CDHP enrollment and reduced risk selection. Having to make an active choice of plan increased CDHP enrollment but also increased risk selection. Risk selection was greater for singles than families and did not differ between HRA and HSA-based CDHPs. Risk selection was not severe and it was well managed. Employers have effective methods to encourage CDHP enrollment and temper selection against traditional plans.

Molecular dynamics analysis of conformational change of paramyxovirus F protein during the initial steps of membrane fusion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin-Garcia, Fernando; Mendieta-Moreno, Jesus Ignacio; Mendieta, Jesus

2012-03-30

Highlights: Black-Right-Pointing-Pointer Initial conformational change of paramyxovirus F protein is caused only by mechanical forces. Black-Right-Pointing-Pointer HRA region undergoes a structural change from a beta + alpha conformation to an extended coil and then to an all-alpha conformation. Black-Right-Pointing-Pointer HRS domains of F protein form three single {alpha}-helices prior to generation of the coiled coil. -- Abstract: The fusion of paramyxovirus to the cell membrane is mediated by fusion protein (F protein) present in the virus envelope, which undergoes a dramatic conformational change during the process. Unlike hemagglutinin in orthomyxovirus, this change is not mediated by an alteration of environmentalmore » pH, and its cause remains unknown. Steered molecular dynamics analysis leads us to suggest that the conformational modification is mediated only by stretching mechanical forces once the transmembrane fusion peptide of the protein is anchored to the cell membrane. Such elongating forces will generate major secondary structure rearrangement in the heptad repeat A region of the F protein; from {beta}-sheet conformation to an elongated coil and then spontaneously to an {alpha}-helix. In addition, it is proposed that the heptad repeat A region adopts a final three-helix coiled coil and that this structure appears after the formation of individual helices in each monomer.« less

A review of heavy metals in indoor dust and its human health-risk implications.

PubMed

Tan, Sock Yin; Praveena, Sarva Mangala; Abidin, Emilia Zainal; Cheema, Manraj Singh

2016-12-01

Indoor dust acts as a media for heavy metal deposition. Past studies have shown that heavy metal concentration in indoor dust is affected by local human activities and atmospheric transport can have harmful effects on human health. Additionally, children are more sensitive to heavy metals due to their hand-to-mouth behaviour and rapid body development. However, limited information on health risks were found in past dust studies as these studies aimed to identify heavy metal concentrations and sources of indoor dust. The objective of this review is to discuss heavy metal concentration and sources influencing its concentration in indoor dust. Accordingly, high lead (Pb) concentration (639.10 μg/g) has been reported in heavy traffic areas. In addition, this review paper aims to estimate the health risk to children from heavy metals in indoor dust via multiple exposure pathways using the health-risk assessment (HRA). Urban areas and industrial sites have revealed high heavy metal concentration in comparison to rural areas. Hazard index (HI) values found in arsenic (As), chromium (Cr) and Pb were 21.30, 1.10 and 2.40, respectively, indicate that non-carcinogenic elements are found in children. Furthermore, most of the past studies have found that carcinogenic risks for As, cadmium (Cd), Cr and Pb were below the acceptable total lifetime cancer risk (TLCR) range (1×10-6-1×10-4). The results of health risk assessment in this review show that carcinogenic risk exists among children. Hence, this proves that future studies need to focus on children's carcinogenic risk in indoor dust studies in order to find out the sources of heavy metals in indoor dust. This review highlights the importance of having the HRA application using bioavailable heavy metal concentration as it provides more accurate health-risk estimation. Moreover, this review is also useful as a reference for policy decision making in protecting children's health.

Quantification of the specific yield in a two-layer hard-rock aquifer model

NASA Astrophysics Data System (ADS)

Durand, Véronique; Léonardi, Véronique; de Marsily, Ghislain; Lachassagne, Patrick

2017-08-01

Hard rock aquifers (HRA) have long been considered to be two-layer systems, with a mostly capacitive layer just below the surface, the saprolite layer, and a mainly transmissive layer underneath, the fractured layer. Although this hydrogeological conceptual model is widely accepted today within the scientific community, it is difficult to quantify the respective storage properties of each layer with an equivalent porous medium model. Based on an HRA field site, this paper attempts to quantify in a distinct manner the respective values of the specific yield (Sy) in the saprolite and the fractured layer, with the help of a deterministic hydrogeological model. The study site is the Plancoët migmatitic aquifer located in north-western Brittany, France, with piezometric data from 36 observation wells surveyed every two weeks for eight years. Whereas most of the piezometers (26) are located where the water table lies within the saprolite, thus representing the specific yield of the unconfined layer (Sy1), 10 of them are representative of the unconfined fractured layer (Sy2), due to their position where the saprolite is eroded or unsaturated. The two-layer model, based on field observations of the layer geometry, runs with the MODFLOW code. 81 values of the Sy1/Sy2 parameter sets were tested manually, as an inverse calibration was not able to calibrate these parameters. In order to calibrate the storage properties, a new quality-of-fit criterion called ;AdVar; was also developed, equal to the mean squared deviation of the seasonal piezometric amplitude variation. Contrary to the variance, AdVar is able to select the best values for the specific yield in each layer. It is demonstrated that the saprolite layer is about 2.5 times more capacitive than the fractured layer, with Sy1 = 10% (7% < Sy1 < 15%) against Sy2 = 2% (1% < Sy2 < 3%), in this particular example.

EPHECT III: Health risk assessment of exposure to household consumer products.

PubMed

Trantallidi, M; Dimitroulopoulou, C; Wolkoff, P; Kephalopoulos, S; Carrer, P

2015-12-01

In the framework of the EU EPHECT project (Emissions, Exposure Patterns and Health Effects of Consumer Products in the EU), irritative and respiratory effects were assessed in relation to acute (30-min) and long-term (24-h) inhalation exposure to key and emerging indoor air pollutants emitted during household use of selected consumer products. A detailed Health Risk Assessment (HRA) was performed for five selected pollutants of respiratory health relevance, namely acrolein, formaldehyde, naphthalene, d-limonene and α-pinene. For each pollutant, the Critical Exposure Limit (CEL) was compared to indoor air concentrations and exposure estimates for the use of 15 selected consumer products by two population groups (housekeepers and retired people) in the four geographical regions of Europe (North, West, South, East), which were derived previously based on microenvironmental modelling. For the present HRA, health-based CELs were derived for certain compounds in case indoor air quality guidelines were not available by the World Health Organization for end-points relevant to the current study. For each pollutant, the highest indoor air concentrations in each microenvironment and exposure estimates across home microenvironments during the day were lower than the corresponding acute and long-term CELs. However, considerable contributions, especially to acute exposures, were obtained in some cases, such as formaldehyde emissions resulting from single product use of a floor cleaning agent (82% CEL), a candle (10% CEL) and an electric air freshener (17% CEL). Regarding multiple product use, the case of 30-min formaldehyde exposure reaching 34% CEL when eight product classes were used across home microenvironments, i.e. all-purpose/kitchen/floor cleaning agents, furniture/floor polish, combustible/electric air fresheners, and perfume, needs to be highlighted. Such estimated values should be evaluated with caution, as these may be attributed to the exposure scenarios specifically constructed for the present study, following a 'most-representative worst-case scenario' approach for exposure and health risk assessment. Copyright © 2015 Elsevier B.V. All rights reserved.

Patterns of Walkability, Transit, and Recreation Environment for Physical Activity.

PubMed

Adams, Marc A; Todd, Michael; Kurka, Jonathan; Conway, Terry L; Cain, Kelli L; Frank, Lawrence D; Sallis, James F

2015-12-01

Diverse combinations of built environment (BE) features for physical activity (PA) are understudied. This study explored whether patterns of GIS-derived BE features explained objective and self-reported PA, sedentary behavior, and BMI. Neighborhood Quality of Life Study participants (N=2,199, aged 20-65 years, 48.2% female, 26% ethnic minority) were sampled in 2001-2005 from Seattle / King County WA and Baltimore MD / Washington DC regions. Their addresses were geocoded to compute net residential density, land use mix, retail floor area ratio, intersection density, public transit, and public park and private recreation facility densities using a 1-km network buffer. Latent profile analyses (LPAs) were estimated from these variables. Multilevel regression models compared profiles on accelerometer-measured moderate to vigorous PA (MVPA) and self-reported PA, adjusting for covariates and clustering. Analyses were conducted in 2013-2014. Seattle region LPAs yielded four profiles, including low walkability/transit/recreation (L-L-L); mean walkability/transit/recreation (M-M-M); moderately high walkability/transit/recreation (MH-MH-MH); and high walkability/transit/recreation (H-HH). All measures were higher in the HHH than the LLL profile (difference of 17.1 minutes/day for MVPA, 146.5 minutes/week for walking for transportation, 58.2 minutes/week for leisure-time PA, and 2.2 BMI points; all p<0.05). Baltimore region LPAs yielded four profiles, including L-L-L; M-M-M; high land use mix, transit, and recreation (HLU-HT-HRA); and high intersection density, high retail floor area ratio (HID-HRFAR). HLU-HT-HRA and L-L-L differed by 12.3 MVPA minutes/day; HID-HRFAR and L-L-L differed by 157.4 minutes/week for walking for transportation (all p<0.05). Patterns of environmental features explain greater differences in adults' PA than the four-component walkability index. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Smartphone app uses loyalty point incentives and push notifications to encourage influenza vaccine uptake.

PubMed

Dale, Leila Pfaeffli; White, Lauren; Mitchell, Marc; Faulkner, Guy

2018-04-23

Carrot Rewards is a free, incentive-based, smartphone health app available in participating provinces in Canada. One feature of Carrot was designed to incentivize influenza vaccine education messages and encourage vaccine uptake for users in the province of British Columbia. This study aimed to evaluate the uptake of the Carrot Flu Campaign educational quiz and to determine if mobile "push" notifications, plus loyalty point incentives, resulted in users visiting a sponsored pharmacy to discuss and receive the influenza vaccine. The Carrot Flu Campaign delivered an in-app quiz, educating users on the importance of the influenza vaccine. Push notifications were then sent to users when they came within 200 m of a sponsored pharmacy. Those who visited the pharmacy collected bonus points and completed a follow up quiz tracking influenza vaccine behaviour. A sub-sample of users completed the Flu Campaign between their baseline and follow up Health Risk Assessment (HRA), a survey which asked about influenza vaccine uptake behaviour. Descriptive statistics were summarized. A total of 38.1% (30,538/80,228) registered Carrot users completed the Flu Campaign quiz. Of those in participating cities (n = 21,469), 41% clicked on the map to show the nearest sponsored pharmacy and 78% enabled their smartphone's "locations" feature, allowing them to receive the push notifications. A small number of users spoke to a pharmacist (n = 96) and less than half reported receiving the influenza vaccine (38/96; 39.6%). From the HRA sub-sample (n = 3693), approximately 5% more users reported receiving the influenza vaccine during the 2017 influenza season compared to the previous year. Carrot Rewards used a novel delivery method to educate the general population and showed geolocation could be used to facilitate influenza vaccine uptake. Future iterations could tailor content to target those most at risk and should consider more robust evaluation methods to determine the app's effectiveness. Copyright © 2018 Elsevier Ltd. All rights reserved.

The Association of Sleep Duration and Morbid Obesity in a Working Population: The Baptist Health South Florida Employee Study.

PubMed

Aziz, Muhammad; Osondu, Chukwuemeka U; Younus, Adnan; Malik, Rehan; Rouseff, Maribeth; Das, Sankalp; Guzman, Henry; Maziak, Wasim; Virani, Salim; Feldman, Theodore; Agatston, Arthur S; Veledar, Emir; Aneni, Ehimen C; Nasir, Khurram

2017-03-01

The current study aimed to determine the relationship between self-reported sleep duration and morbid obesity in an employee population. Baptist Health South Florida conducts an annual Health Risk Assessment (HRA) for its employees. Data for this cross-sectional study was collected via this HRA in 2014, and included information on self-reported sleep duration, height and weight for body mass index (BMI), and other biometric measures. Average sleep duration was categorized as short sleep (<6 hr), optimal sleep (6-7.9 hr), and long sleep duration (≥8 hr), while obesity status was categorized as nonobese (BMI <30 kg/m 2 ), obese (30-34.9 kg/m 2 ), and morbid obese (≥35 kg/m 2 ). A total of 9505 participants (mean age 42.8 ± 12.1 years, 75% females, and 55% Hispanic) were included in this study. Prevalence of morbid obesity was about 24% among employees who were sleeping for less than 6 hr compared to 13% and 14% among those sleeping for 6-7.9 hours, and 8 or more hours respectively. In regression analyses, persons who slept less than 6 hr had almost twice the odds of morbid obesity compared to those who slept 6-7.9 hr (odds ratio = 1.8; 1.5-2.2). Our finding that short sleep duration (<6 hr) is significantly associated with a higher risk of morbid obesity should facilitate the development of workplace-based programs that focus on improving sleep among at-risk employees, especially those who work in shift duties to reduce the risk of morbid obesity and other comorbid conditions. Future studies are needed to further explore the relationship of sleep duration and morbid obesity in employee populations.

Health risk assessment of kerosene usage in an informal settlement in Durban, South Africa

NASA Astrophysics Data System (ADS)

Muller, E.; Diab, R. D.; Binedell, M.; Hounsome, R.

In Durban, South Africa studies have shown that more than seven out of ten households in low-income metropolitan areas rely on kerosene for domestic purposes, leading to widespread problems of poor indoor air quality. In light of the known health effects of kerosene usage, this study aimed to quantify the health risk for people living in a densely populated informal settlement known as Cato Crest within the Durban metropolitan area. The pollutants investigated included nitrogen dioxide, benzene and toluene. Nitrogen dioxide is known to affect both respiratory and immune systems, benzene is carcinogenic while toluene has a neurological health end point. All three pollutants are harmful when inhaled. The United States Environmental Protection Agency (US EPA) health risk assessment (HRA) framework was applied. Information on the exposure patterns of residents in Cato Crest were acquired through questionnaires in which data on fuel use, building structure, cooking habits and time-activity patterns were collected. Air quality monitoring of nitrogen dioxide and volatile organic compounds was also conducted in the households. The time-activity pattern survey revealed that the exposure periods of individuals in Cato Crest were far greater than the default exposure periods used by the US EPA. The results of the HRA showed that the residents of Cato Crest may experience significant health risks as a result of kerosene usage in their homes. Exposure to 1-h nitrogen dioxide concentration is not likely to produce adverse health effects, whereas exposure over a 24-h period indicates a potential health risk to sensitive individuals in two of the households when US EPA exposure values are used and in all of the households when locally derived exposure values are used. Benzene poses a health risk to sensitive individuals in 50% of the households when local exposure parameters are used, whereas there is no health risk associated with exposure to toluene.

Acute macular neuroretinopathy: contribution of spectral-domain optical coherence tomography and multifocal ERG.

PubMed

Maschi, Célia; Schneider-Lise, Bérengère; Paoli, Vincent; Gastaud, Pierre

2011-06-01

Acute macular neuroretinopathy is a rare disease which occurs in young women and causes sudden paracentral scotoma and typical reddish-brown macular lesions. We report two cases of young women suffering from acute macular neuroretinopathy which we observed with spectral-domain Spectralis HRA-OCT and multifocal ERG at 3 and 7 months. Imaging revealed an early hyper-reflectivity of the photoreceptor layer, which changed into hyporeflectivity in the first week and remained the same in the following months, whereas visual field improved. Our findings show involvement primarly of the outer retina, and confirm OCT and mf ERG as important tools for diagnosis and follow-up of pathologic changes in AMNR, as other diagnostic tests often remain normal.

Health Risk Reduction Programs in Employer-Sponsored Health Plans: Part I—Efficacy

PubMed Central

Rothstein, Mark A.; Harrell, Heather L.

2011-01-01

Objective We sought to determine whether workplace health risk reduction programs (HRRPs) using health risk assessments (HRAs), individually focused risk reduction, and financial incentives succeeded in improving employee health and reducing employer health benefit costs. Methods We reviewed the proprietary HRA available to us and conducted a literature review to determine the efficacy of HRRPs using HRAs, individualized employee interventions, and financial incentives for employee participation. Results There is some evidence that HRRPs in employer-sponsored programs improve measures of employee health, but the results of these studies are somewhat equivocal. Conclusion Employer-sponsored HRRPs may have some benefits, but problems in plan design and in the studies assessing their efficacy complicate drawing conclusions. PMID:19625972

A reliability analysis tool for SpaceWire network

NASA Astrophysics Data System (ADS)

Zhou, Qiang; Zhu, Longjiang; Fei, Haidong; Wang, Xingyou

2017-04-01

A SpaceWire is a standard for on-board satellite networks as the basis for future data-handling architectures. It is becoming more and more popular in space applications due to its technical advantages, including reliability, low power and fault protection, etc. High reliability is the vital issue for spacecraft. Therefore, it is very important to analyze and improve the reliability performance of the SpaceWire network. This paper deals with the problem of reliability modeling and analysis with SpaceWire network. According to the function division of distributed network, a reliability analysis method based on a task is proposed, the reliability analysis of every task can lead to the system reliability matrix, the reliability result of the network system can be deduced by integrating these entire reliability indexes in the matrix. With the method, we develop a reliability analysis tool for SpaceWire Network based on VC, where the computation schemes for reliability matrix and the multi-path-task reliability are also implemented. By using this tool, we analyze several cases on typical architectures. And the analytic results indicate that redundancy architecture has better reliability performance than basic one. In practical, the dual redundancy scheme has been adopted for some key unit, to improve the reliability index of the system or task. Finally, this reliability analysis tool will has a directive influence on both task division and topology selection in the phase of SpaceWire network system design.

REPRODUCIBILITY OF MACULAR PIGMENT OPTICAL DENSITY MEASUREMENT BY TWO-WAVELENGTH AUTOFLUORESCENCE IN A CLINICAL SETTING.

PubMed

You, Qi Sheng; Bartsch, Dirk-Uwe G; Espina, Mark; Alam, Mostafa; Camacho, Natalia; Mendoza, Nadia; Freeman, William R

2016-07-01

Macular pigment, composed of lutein, zeaxanthin, and meso-zeaxanthin, is postulated to protect against age-related macular degeneration, likely because of filtering blue light and its antioxidant properties. Macular pigment optical density (MPOD) is reported to be associated with macular function evaluated by visual acuity and multifocal electroretinogram. Given the importance of macular pigment, reliable and accurate measurement methods are important. The main purpose of this study is to determine the reproducibility of MPOD measurement by two-wavelength autofluorescence method using scanning laser ophthalmoscopy. Sixty-eight eyes of 39 persons were enrolled in the study, including 11 normal eyes, 16 eyes with wet age-related macular degeneration, 16 eyes with dry age-related macular degeneration, 11 eyes with macular edema due to diabetic mellitus, branch retinal vein occlusion or macular telangiectasia, and 14 eyes with tractional maculopathy, including vitreomacular traction, epiretinal membrane, or macular hole. MPOD was measured with a two-wavelength (488 and 514 nm) autofluorescence method with the Spectralis HRA + OCT after pupil dilation. The measurement was repeated for each eye 10 minutes later. The analysis of variance and Bland-Altman plot were used to assess the reproducibility between the two measurements. The mean MPOD at eccentricities of 1° and 2° was 0.36 ± 0.17 (range: 0.04-0.69) and 0.15 ± 0.08 (range: -0.03 to 0.35) for the first measurement and 0.35 ± 0.17 (range: 0.02-0.68) and 0.15 ± 0.08 (range: -0.01 to 0.33) for the second measurement, respectively. The difference between the 2 measurements was not statistically significant, and the Bland-Altman plot showed 7.4% and 5.9% points outside the 95% limits of agreement, indicating an overall excellent reproducibility. Similarly, there is no significant difference between the first and second measurements of MPOD volume within eccentricities of 1°, 2°, and 6° radius, and the Bland-Altman plot showed 8.8%, 2.9%, and 4.4% points outside the 95% limits of agreement, respectively. The data for the reproducibility did not differ significantly among the various disease and normal eyes. Under routine examination conditions with pupil dilation, MPOD measurement by two-wavelength autofluorescence method showed a high reproducibility.

Reproducibility of Macular Pigment Optical Density Measurement by Two-wave Length Auto-fluorescence in a Clinical Setting

PubMed Central

You, Qi-Sheng; Bartsch, Dirk-Uwe G.; Espina, Mark; Alam, Mostafa; Camacho, Natalia; Mendoza, Nadia; Freeman, William

2015-01-01

Purpose Macular pigment, composed of lutein, zeaxanthin, and meso-zeaxanthin, is postulated to protect against age-related macular degeneration (AMD), likely due to filtering blue light and its antioxidant properties. Macular pigment optical density (MPOD) is reported to be associated with macular function evaluated by visual acuity and multifocal electroretinogram. Given the importance of macular pigment, reliable and accurate measurement methods are important. The main purpose of current study is to determine the reproducibility of MPOD measurement by two-wave length auto-fluorescence method using scanning laser ophthalmoscopy. Methods Sixty eight eyes of 39 persons were enrolled in the study, including 11 normal eyes, 16 eyes with wet AMD, 16 eyes with dry AMD, 11 eyes with macular edema due to diabetic mellitus, branch retinal vein occlusion or macular telangiectasia and 14 eyes with tractional maculopathy including vitreomacular traction, epiretinal membrane or macular hole. MPOD was measured with a two-wavelength (488 and 514 nm) auto-fluorescence method with the Spectralis HRA+OCT after pupil dilation. The measurement was repeated for each eye 10 minutes later. The Analysis of variance (ANOVA) and Bland-Altman plot were used to assess the reproducibility between the two measurements. Results The mean MPOD at eccentricities of 1° and 2° was 0.36±0.17 (range: 0.04–0.69) and 0.15±0.08(range: −0.03, 0.35) for the first measurement and 0.35±0.17 (range: 0.02, 0.68) and 0.15±0.08 (range: −0.01, 0.33) for the second measurement respectively. The difference between the two measurements was not statistically significant, and the Bland-Altman plot showed 7.4% and 5.9% points outside the 95% limits of agreement, indicating an overall excellent reproducibility. Similarly, there is no significant difference between the first and second measurements of MPOD volume within eccentricities of 1°, 2° and 6° radius, and the Bland-Altman plot showed 8.8%, 2.9% and 4.4% points outside the 95% limits of agreement respectively. The data for the reproducibility did not differ significantly among the various disease and normal eyes. Conclusion Under routine examination conditions with pupil dilation, MPOD measurement by two-wave length auto-fluorescence method showed a high reproducibility. PMID:26655614

Reliability Practice at NASA Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Pruessner, Paula S.; Li, Ming

2008-01-01

This paper describes in brief the Reliability and Maintainability (R&M) Programs performed directly by the reliability branch at Goddard Space Flight Center (GSFC). The mission assurance requirements flow down is explained. GSFC practices for PRA, reliability prediction/fault tree analysis/reliability block diagram, FMEA, part stress and derating analysis, worst case analysis, trend analysis, limit life items are presented. Lessons learned are summarized and recommendations on improvement are identified.

Balance, dizziness and proprioception in patients with chronic whiplash associated disorders complaining of dizziness: A prospective randomized study comparing three exercise programs.

PubMed

Treleaven, Julia; Peterson, Gunnel; Ludvigsson, Maria Landén; Kammerlind, Ann-Sofi; Peolsson, Anneli

2016-04-01

Dizziness and unsteadiness are common symptoms following a whiplash injury. To compare the effect of 3 exercise programs on balance, dizziness, proprioception and pain in patients with chronic whiplash complaining of dizziness. A sub-analysis of a randomized study. One hundred and forty subjects were randomized to either a physiotherapist-guided neck-specific exercise (NSE), physiotherapist-guided neck-specific exercise, with a behavioural approach (NSEB) or prescription of general physical activity (PPA) group. Pre intervention, 3, 6 and 12 months post baseline they completed the University of California Los Angeles Dizziness Questionnaire (UCLA-DQ), Visual Analogue Scales (VAS) for, dizziness at rest and during activity and physical measures (static and dynamic clinical balance tests and head repositioning accuracy (HRA)). There were significant time by group differences with respect to dizziness during activity and UCLA-Q favouring the physiotherapy led neck specific exercise group with a behavioural approach. Within group analysis of changes over time also revealed significant changes in most variables apart from static balance. Between and within group comparisons suggest that physiotherapist led neck exercise groups including a behavioural approach had advantages in improving measures of dizziness compared with the general physical activity group, although many still complained of dizziness and balance impairment. Future studies should consider exercises specifically designed to address balance, dizziness and cervical proprioception in those with persistent whiplash. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

Associations between poor sleep quality and stages of change of multiple health behaviors among participants of employee wellness program

PubMed Central

Hui, Siu-kuen Azor; Grandner, Michael A.

2015-01-01

Objective Using the Transtheoretical Model of behavioral change, this study evaluates the relationship between sleep quality and the motivation and maintenance processes of healthy behavior change. Methods The current study is an analysis of data collected in 2008 from an online health risk assessment (HRA) survey completed by participants of the Kansas State employee wellness program (N = 13,322). Using multinomial logistic regression, associations between self-reported sleep quality and stages of change (i.e. precontemplation, contemplation, preparation, action, maintenance) in five health behaviors (stress management, weight management, physical activities, alcohol use, and smoking) were analyzed. Results Adjusted for covariates, poor sleep quality was associated with an increased likelihood of contemplation, preparation, and in some cases action stage when engaging in the health behavior change process, but generally a lower likelihood of maintenance of the healthy behavior. Conclusions The present study demonstrated that poor sleep quality was associated with an elevated likelihood of contemplating or initiating behavior change, but a decreased likelihood of maintaining healthy behavior change. It is important to include sleep improvement as one of the lifestyle management interventions offered in EWP to comprehensively reduce health risks and promote the health of a large employee population. PMID:26046013

Ultraviolet carcinogenesis in the hairless mouse skin. Influence of the sunscreen 2-ethylhexyl-p-methoxycinnamate.

PubMed

Gallagher, C H; Greenoak, G E; Reeve, V E; Canfield, P J; Baker, R S; Bonin, A M

1984-10-01

The mutagenicity of some samples of a commonly used sunscreen, 2-ethylhexyl-p-methoxycinnamate (2-EHMC), led to these studies of its potential carcinogenicity in the HRA/Skh hairless mouse. In a daily treatment regime, repeated for 9 weeks, groups of mice were painted on the dorsum with 2-EHMC, and were then exposed to low doses of one of two artificial ultraviolet (UV) light sources. Mice were also treated with UV alone and with 2-EHMC alone. The accumulated UV exposure alone produced tumours in 40-100% of mice. However, 2-EHMC-treated mice were protected. Subsequent treatment of the 2-EHMC-protected mice, and mice previously treated with 2-EHMC alone, with the tumour promoter, croton oil, produced tumours on a significant number of animals. We conclude that 2-EHMC protects from UV tumorigenesis in the absence of a tumour promoter. However, although tumours appeared on only 4 out of 160 2-EHMC-treated mice exposed to UV, the carcinogenic process had been initiated in others, as application of the tumour promoter, croton oil, produced tumours. Statistical analysis of the incidence of promoted tumours inferred that prior irradiation with UV may not have been implicated. Therefore, 2-EHMC itself may initiate tumours in this strain of hairless mouse.

Immune competence assessment in marine medaka (Orzyias melastigma)-a holistic approach for immunotoxicology.

PubMed

Ye, Roy R; Peterson, Drew R; Seemann, Frauke; Kitamura, Shin-Ichi; Lee, J S; Lau, Terrance C K; Tsui, Stephen K W; Au, Doris W T

2017-12-01

Many anthropogenic pollutants in coastal marine environments can induce immune impairments in wild fish and reduce their survival fitness. There is a pressing need to establish sensitive and high throughput in vivo tools to systematically evaluate the immunosuppressive effects of contaminants in marine teleosts. This study reviewed a battery of in vivo immune function detection technologies established for different biological hierarchies at molecular (immune function pathways and genes by next generation sequencing (NGS)), cellular (leukocytes profiles by flow cytometry), tissues/organ system (whole adult histo-array), and organism (host resistance assays (HRAs)) levels, to assess the immune competence of marine medaka Oryzias melastigma. This approach enables a holistic assessment of fish immune competence under different chemical exposure or environmental scenarios. The data obtained will also be useful to unravel the underlying immunotoxic mechanisms. Intriguingly, NGS analysis of hepatic immune gene expression profiles (male > female) are in support of the bacterial HRA findings, in which infection-induced mortality was consistently higher in females than in males. As such, reproductive stages and gender-specific responses must be taken into consideration when assessing the risk of immunotoxicants in the aquatic environment. The distinct phenotypic sexual dimorphism and short generation time (3 months) of marine medaka offer additional advantages for sex-related immunotoxicological investigation.

Risk Selection into Consumer-Directed Health Plans: An Analysis of Family Choices within Large Employers

PubMed Central

McDevitt, Roland D; Haviland, Amelia M; Lore, Ryan; Laudenberger, Laura; Eisenberg, Matthew; Sood, Neeraj

2014-01-01

Objective To identify the degree of selection into consumer-directed health plans (CDHPs) versus traditional plans over time, and factors that influence choice and temper risk selection. Data Sources/Study Setting Sixteen large employers offering both CDHP and traditional plans during the 2004–2007 period, more than 200,000 families. Study Design We model CDHP choice with logistic regression; predictors include risk scores, in addition to family, choice setting, and plan characteristics. Additional models stratify by account type or single enrollee versus family. Data Collection/Extraction Methods Risk scores, family characteristics, and enrollment decisions are derived from medical claims and enrollment files. Interviews with human resources executives provide additional data. Principal Findings CDHP risk scores were 74 percent of traditional plan scores in the first year, and this difference declined over time. Employer contributions to accounts and employee premium savings fostered CDHP enrollment and reduced risk selection. Having to make an active choice of plan increased CDHP enrollment but also increased risk selection. Risk selection was greater for singles than families and did not differ between HRA and HSA-based CDHPs. Conclusions Risk selection was not severe and it was well managed. Employers have effective methods to encourage CDHP enrollment and temper selection against traditional plans. PMID:24800305

Lifetime Reliability Prediction of Ceramic Structures Under Transient Thermomechanical Loads

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Jadaan, Osama J.; Gyekenyesi, John P.

2005-01-01

An analytical methodology is developed to predict the probability of survival (reliability) of ceramic components subjected to harsh thermomechanical loads that can vary with time (transient reliability analysis). This capability enables more accurate prediction of ceramic component integrity against fracture in situations such as turbine startup and shutdown, operational vibrations, atmospheric reentry, or other rapid heating or cooling situations (thermal shock). The transient reliability analysis methodology developed herein incorporates the following features: fast-fracture transient analysis (reliability analysis without slow crack growth, SCG); transient analysis with SCG (reliability analysis with time-dependent damage due to SCG); a computationally efficient algorithm to compute the reliability for components subjected to repeated transient loading (block loading); cyclic fatigue modeling using a combined SCG and Walker fatigue law; proof testing for transient loads; and Weibull and fatigue parameters that are allowed to vary with temperature or time. Component-to-component variation in strength (stochastic strength response) is accounted for with the Weibull distribution, and either the principle of independent action or the Batdorf theory is used to predict the effect of multiaxial stresses on reliability. The reliability analysis can be performed either as a function of the component surface (for surface-distributed flaws) or component volume (for volume-distributed flaws). The transient reliability analysis capability has been added to the NASA CARES/ Life (Ceramic Analysis and Reliability Evaluation of Structures/Life) code. CARES/Life was also updated to interface with commercially available finite element analysis software, such as ANSYS, when used to model the effects of transient load histories. Examples are provided to demonstrate the features of the methodology as implemented in the CARES/Life program.

75 FR 5633 - Notice of Extension of Comment Period for NUREG-1921, EPRI/NRC-RES Fire Human Reliability...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-03

..., EPRI/NRC- RES Fire Human Reliability Analysis Guidelines, Draft Report for Comment AGENCY: Nuclear... Human Reliability Analysis Guidelines, Draft Report for Comment'' (December 11, 2009; 74 FR 65810). This... Human Reliability Analysis Guidelines'' is available electronically under ADAMS Accession Number...

Wind energy Computerized Maintenance Management System (CMMS) : data collection recommendations for reliability analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, Valerie A.; Ogilvie, Alistair B.

2012-01-01

This report addresses the general data requirements for reliability analysis of fielded wind turbines and other wind plant equipment. The report provides a rationale for why this data should be collected, a list of the data needed to support reliability and availability analysis, and specific data recommendations for a Computerized Maintenance Management System (CMMS) to support automated analysis. This data collection recommendations report was written by Sandia National Laboratories to address the general data requirements for reliability analysis of operating wind turbines. This report is intended to help develop a basic understanding of the data needed for reliability analysis frommore » a Computerized Maintenance Management System (CMMS) and other data systems. The report provides a rationale for why this data should be collected, a list of the data needed to support reliability and availability analysis, and specific recommendations for a CMMS to support automated analysis. Though written for reliability analysis of wind turbines, much of the information is applicable to a wider variety of equipment and analysis and reporting needs. The 'Motivation' section of this report provides a rationale for collecting and analyzing field data for reliability analysis. The benefits of this type of effort can include increased energy delivered, decreased operating costs, enhanced preventive maintenance schedules, solutions to issues with the largest payback, and identification of early failure indicators.« less

Human health risk assessment in restoring safe and productive use of abandoned contaminated sites.

PubMed

Wcisło, Eleonora; Bronder, Joachim; Bubak, Anicenta; Rodríguez-Valdés, Eduardo; Gallego, José Luis R

2016-09-01

In Europe soil contamination has been recognized as a serious problem. The needs to remediate contaminated sites are not questionable, although the remediation actions are often hindered by their very high financial costs. On the other hand, the abandoned contaminated sites may have the potential for redevelopment and creating conditions appropriate for their productive reuse bringing social, economic and environmental benefits. The main concern associated with the contaminated sites is their potential adverse health impact. Therefore, in the process of contaminated site redevelopment the risk assessment and the subsequent risk management decisions will play a crucial role. The main objective of this study was to illustrate the role of the human health risk assessment (HRA) in supporting site remediation and reuse decisions. To exemplify the significance of the HRA process in this field the Nitrastur site, located in Asturias, Spain was used. Risks resulting from soil contamination with arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), mercury (Hg), zinc (Zn) and lead (Pb) were assessed under three potential future land use patterns: industrial, residential and recreational. The results of the study indicated that soil at the Nitrastur site might pose non-cancer and cancer risks to potential future receptors - industrial workers, residents and recreational users. Arsenic and lead are the main substances responsible for the health risk and the primary drivers of remedial decisions at the site. The highest total cancer risks were observed under the residential scenario, followed in descending order by the recreational and industrial ones. The remedial maps illustrate in which areas remediation activities are required, depending on a given land use pattern. The obtained results may be used to develop, analyse, compare and select the remedial options within the intended land use pattern. They may also be used to support the decisions concerning the reuse of the site or to create different redevelopment plans for different parts of the site. The study may help improve understanding and interaction between risk assessors and risk managers which are necessary to make proper, fully informed decisions enhancing public trust and credibility. Copyright © 2016 Elsevier Ltd. All rights reserved.

Characteristics of atrial fibrillation cycle length predict restoration of sinus rhythm by catheter ablation.

PubMed

Di Marco, Luigi Yuri; Raine, Daniel; Bourke, John P; Langley, Philip

2013-09-01

Successful termination of atrial fibrillation (AF) during catheter ablation (CA) is associated with arrhythmia-free follow-up. Preablation factors such as mean atrial fibrillation cycle length (AFCL) predict the likelihood of AF termination during ablation but recurring patterns and AFCL stability have not been evaluated. To investigate novel predictors of acute and postoperative ablation outcomes from intracardiac electrograms: (1) recurring AFCL patterns and (2) localization index (LI) of the instantaneous fibrillatory rate distribution. Sixty-two patients with AF (32 paroxysmal AF; 45 men; age 57 ± 10 years) referred for CA were enrolled. One-minute electrogram was recorded from coronary sinus (CS; 5 bipoles) and right atrial appendage (HRA; 2 bipoles). Atrial activations were detected automatically to derive the AFCL and instantaneous fibrillatory rate (inverse of AFCL) time series. Recurring AFCL patterns were quantified by using recurrence plot indices (RPIs): percentage determinism, entropy of determinism, and maximum diagonal length. AFCL stability was determined by using the LI. The CA outcome predictivity of individual indices was assessed. Patients with terminated atrial fibrillation (T-AF) had higher RPI (P < .05 in CS7-8) and LI than did those with nonterminated atrial fibrillation (P < .005 in CS3-4; P < .05 in CS5-6, CS7-8, and HRA). Patients free of arrhythmia after 3-month follow-up had higher RPI and LI (all P < .05 in CS7-8). All indices except percentage determinism predicted T-AF in CS7-8 (area under the curve [AUC] ≥ 0.71; odds ratio [OR] ≥ 4.50; P < .05). The median AFCL and LI predicted T-AF in HRAD (AUC ≥ 0.75; OR ≥ 7.76; P < .05). The RPI and LI predicted 3-month follow-up in CS7-8 (AUC ≥ 0.68; OR ≥ 4.17; P < .05). AFCL recurrence and stability indices could be used in selecting patients more likely to benefit from CA. Copyright © 2013 Heart Rhythm Society. Published by Elsevier Inc. All rights reserved.

Fundus autofluorescence and fate of glycoxidized particles injected into subretinal space in rabbit age-related macular degeneration model.

PubMed

Hirata, Megumi; Yasukawa, Tsutomu; Wiedemann, Peter; Kimura, Erika; Kunou, Noriyuki; Eichler, Wolfram; Takase, Ayae; Sato, Rina; Ogura, Yuichiro

2009-07-01

Abnormal fundus autofluorescence (FAF) is associated with the incidence or progression of dry and wet age-related macular degeneration (AMD). We previously developed a rabbit AMD model with drusen and type-1 choroidal neovascularization (CNV) that mimics the accumulation of lipofuscin using artificial glycoxidized particles. The objective of the current study was to investigate in vitro effects of glycoxidized particles on retinal pigment epithelial (RPE) cells, and the FAF and fate of injected particles in this model. Glycoxidized particles were prepared by a 4-day incubation of water-in-oil emulsions of serum albumin and glycolaldehyde to allow glycoxidation and consequent cross-linking. After particles were added in the culture medium of confluent human RPE cells, cell viability, adhesion activity, and proliferation activity were assessed by cell counting. In anesthetized rabbits, 250 microg of glycoxidized particles were injected into the subretinal space to induce experimental AMD. FAF measurement and angiography with sodium fluorescein and indocyanine green were performed periodically using the Heidelberg Retina Angiograph 2 (HRA2). The eyes enucleated, and the lung and the spleen, excised at week 4 or 12, were histologically evaluated by light and fluorescence microscopy. Glycoxidized particles phagocytosed did not impair the cell viability, adhesion, and proliferation of RPE cells, as compared with RPE cells in controls. HRA2 showed different patterns of abnormal FAF in the area with the implanted glycoxidized particles, similar to pathological FAF patterns in aging human eyes with or without AMD. Histologic examination showed accumulated glycoxidized particles and large lipofuscin granules with green autofluorescence in and under the RPE and at the margins of or beneath drusen, possibly associated with abnormal FAF. In addition, some particles were detected in the lung and the spleen. Glycoxidized particles phagocytosed might stay in RPE cells without any acute biological reaction. Our rabbit model of AMD simulated abnormal FAF patterns observed in aging human eyes with or without AMD. Glycoxidized particles phagocytosed by RPE cells could be deposited on Bruch's membrane in rabbits, possibly excreted in part into choroidal circulation. This model may be useful for understanding various patterns of abnormal FAF histologically, and for elucidating the pathogenesis of AMD.

Comparison of broiler performance and carcass yields when fed transgenic maize grain containing event DP-O9814O-6 and processed fractions from transgenic soybeans containing event DP-356O43-5.

PubMed

McNaughton, J; Roberts, M; Rice, D; Smith, B; Hinds, M; Delaney, B; Iiams, C; Sauber, T

2011-08-01

The performance of broilers fed diets containing maize grain from event DP-Ø9814Ø-6 (98140; gat4621 and zm-hra genes) and processed fractions (meal, hulls, and oil) from soybeans containing event DP-356Ø43-5 (356043; gat4601 and gm-hra genes) was evaluated in a 42-d feeding study. Diets were produced with nontransgenic maize grain and soybean fractions from controls with comparable genetic backgrounds to 98140 and 356043 (control), 98140 maize and 356043 soybean (98140 + 356043), or 3 commercially available nontransgenic maize and soybean combinations. Ross 708 broilers (n = 120/group; 50% male, 50% female) were fed diets in 3 phases: starter (d 0 to 21), grower (d 22 to 35), and finisher (d 36 to 42). Starter diets contained (on average) 63% maize and 28% soybean meal, grower diets 66% maize and 26% soybean meal, and finisher diets 72% maize and 21% soybean meal; soybean hulls and oils were held constant at 1.0 and 0.5%, respectively, across all diets in all phases. Weight gain, feed intake, and mortality-adjusted feed efficiency were calculated for d 0 to 42. Standard organ and carcass yield data were collected on d 42. Data were analyzed using a mixed model ANOVA with differences between control and 98140 + 356043 group means considered significant at P < 0.05. Reference group data were used only to estimate experimental variability and to generate tolerance intervals. No significant differences were observed in weight gain, mortality, mortality-adjusted feed efficiency, organ yields, or carcass yields between broilers consuming diets produced with 98140 + 356043 and those consuming diets produced with control maize and soybean fractions. All values of response variables evaluated in the control and 98140 + 356043 groups fell within calculated tolerance intervals. Based on these results, it was concluded that the combination of genetically modified 98140 maize and 356043 soybean fractions was nutritionally equivalent to nontransgenic maize and soybean controls with comparable genetic backgrounds.

Nutritional equivalency evaluation of transgenic maize grain from event DP-O9814O-6 and transgenic soybeans containing event DP-356O43-5: laying hen performance and egg quality measures.

PubMed

McNaughton, J; Roberts, M; Rice, D; Smith, B; Hinds, M; Delaney, B; Iiams, C; Sauber, T

2011-02-01

The objective of this study was to compare the nutritional performance of laying hens fed maize grain from event DP-Ø9814Ø-6 (98140; gat4621 and zm-hra genes) and processed soybean meal from soybeans containing event DP-356Ø43-5 (356043; gat4601 and gm-hra genes), individually or in combination, with the performance of hens fed diets containing nontransgenic maize and soybean meal. Healthy pullets (n = 216) placed in cages (3 hens/cage) were randomly assigned to 9 dietary treatments (8 cages/treatment): nontransgenic controls 1, 2, and 3 (comparable genetic background controls for 98140, 356043, and 98140 + 356043, respectively); reference 1, reference 2, and reference 3 (commercially available nontransgenic maize-soybean meal sources); and 98140 (test 1), 356043 (test 2), and 98140 + 356043 (test 3). The experiment was divided into three 4-wk phases (24 to 28 wk, 28 to 32 wk, and 32 to 36 wk of age), during which time hens were fed mash diets. Performance (BW, feed intake, and egg production) and egg quality data were collected. Data were analyzed using a mixed model ANOVA; differences between the control and respective test group means were considered significant at P < 0.05. Data generated from the reference groups were used only in the estimation of experimental variability and in generating the tolerance interval. Body weight and BW gain, egg production, and production efficiency for hens fed the test diets were similar to the respective values for hens fed the corresponding control diets. Haugh unit measures and egg component weights were similar between the respective test and control groups, and no differences were observed in quality grades or crack measures. All observed values of the control and test groups were within the calculated tolerance intervals. This research indicates that the performance and egg quality of hens fed diets containing 98140 maize grain, 356043 soybean meal, or a combination of the 2 was comparable with that of hens fed diets formulated with nontransgenic maize grain or soybean meal control diets with comparable genetic backgrounds.

Reliability Analysis and Reliability-Based Design Optimization of Circular Composite Cylinders Under Axial Compression

NASA Technical Reports Server (NTRS)

Rais-Rohani, Masoud

2001-01-01

This report describes the preliminary results of an investigation on component reliability analysis and reliability-based design optimization of thin-walled circular composite cylinders with average diameter and average length of 15 inches. Structural reliability is based on axial buckling strength of the cylinder. Both Monte Carlo simulation and First Order Reliability Method are considered for reliability analysis with the latter incorporated into the reliability-based structural optimization problem. To improve the efficiency of reliability sensitivity analysis and design optimization solution, the buckling strength of the cylinder is estimated using a second-order response surface model. The sensitivity of the reliability index with respect to the mean and standard deviation of each random variable is calculated and compared. The reliability index is found to be extremely sensitive to the applied load and elastic modulus of the material in the fiber direction. The cylinder diameter was found to have the third highest impact on the reliability index. Also the uncertainty in the applied load, captured by examining different values for its coefficient of variation, is found to have a large influence on cylinder reliability. The optimization problem for minimum weight is solved subject to a design constraint on element reliability index. The methodology, solution procedure and optimization results are included in this report.

Molecular epidemiology and phylogenetic distribution of the Escherichia coli pks genomic island.

PubMed

Johnson, James R; Johnston, Brian; Kuskowski, Michael A; Nougayrede, Jean-Philippe; Oswald, Eric

2008-12-01

Epidemiological and phylogenetic associations of the pks genomic island of extraintestinal pathogenic Escherichia coli (ExPEC), which encodes the genotoxin colibactin, are incompletely defined. clbB and clbN (as markers for the 5' and 3' regions of the pks island, respectively), clbA and clbQ (as supplemental pks island markers), and 12 other putative ExPEC virulence genes were newly sought by PCR among 131 published E. coli isolates from hospitalized veterans (62 blood isolates and 69 fecal isolates). Blood and fecal isolates and clbB-positive and -negative isolates were compared for 66 newly and previously assessed traits. Among the 14 newly sought traits, clbB and clbN (colibactin polyketide synthesis system), hra (heat-resistant agglutinin), and vat (vacuolating toxin) were significantly associated with bacteremia. clbB and clbN identified a subset within phylogenetic group B2 with extremely high virulence scores and a high proportion of blood isolates. However, by multivariable analysis, other traits were more predictive of blood source than clbB and clbN were; indeed, among the newly sought traits, only pic significantly predicted bacteremia (negative association). By correspondence analysis, clbB and clbN were closely associated with group B2 and multiple B2-associated traits; by principal coordinate analysis, clbB and clbN partitioned the data set better than did blood versus fecal source. Thus, the pks island was significantly associated with bacteremia, multiple ExPEC-associated virulence genes, and group B2, and within group B2, it identified an especially high-virulence subset. This extends previous work regarding the pks island and supports investigation of the colibactin system as a potential therapeutic target.

Evaluation of Reliability Coefficients for Two-Level Models via Latent Variable Analysis

ERIC Educational Resources Information Center

Raykov, Tenko; Penev, Spiridon

2010-01-01

A latent variable analysis procedure for evaluation of reliability coefficients for 2-level models is outlined. The method provides point and interval estimates of group means' reliability, overall reliability of means, and conditional reliability. In addition, the approach can be used to test simple hypotheses about these parameters. The…

A single-loop optimization method for reliability analysis with second order uncertainty

NASA Astrophysics Data System (ADS)

Xie, Shaojun; Pan, Baisong; Du, Xiaoping

2015-08-01

Reliability analysis may involve random variables and interval variables. In addition, some of the random variables may have interval distribution parameters owing to limited information. This kind of uncertainty is called second order uncertainty. This article develops an efficient reliability method for problems involving the three aforementioned types of uncertain input variables. The analysis produces the maximum and minimum reliability and is computationally demanding because two loops are needed: a reliability analysis loop with respect to random variables and an interval analysis loop for extreme responses with respect to interval variables. The first order reliability method and nonlinear optimization are used for the two loops, respectively. For computational efficiency, the two loops are combined into a single loop by treating the Karush-Kuhn-Tucker (KKT) optimal conditions of the interval analysis as constraints. Three examples are presented to demonstrate the proposed method.

An interactional test of the reformulated helplessness theory of depression in women receiving clinical treatment for eating disorders.

PubMed

Rotenberg, Ken J; Costa, Paula; Trueman, Mark; Lattimore, Paul

2012-08-01

The study tested the Reformulated Helplessness model that individuals who show combined internal locus of control, high stability and high globality attributions for negative life events are prone to depression. Thirty-six women (M=29 years-8 months of age) receiving clinical treatment for eating disorders completed: the Attribution Style Questionnaire, the Beck Depression Inventory, and the Stirling Eating Disorder Scales. An HRA yielded a three-way interaction among the attributional dimensions on depressive symptoms. Plotting of the slopes showed that the attribution of negative life events to the combination of internal locus of control, high stability, and a high globality, was associated with the optimal level of depressive symptoms. The findings supported the Reformulated Helplessness as a model of depression. Copyright © 2012 Elsevier Ltd. All rights reserved.

Chapter 15: Reliability of Wind Turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheng, Shuangwen; O'Connor, Ryan

The global wind industry has witnessed exciting developments in recent years. The future will be even brighter with further reductions in capital and operation and maintenance costs, which can be accomplished with improved turbine reliability, especially when turbines are installed offshore. One opportunity for the industry to improve wind turbine reliability is through the exploration of reliability engineering life data analysis based on readily available data or maintenance records collected at typical wind plants. If adopted and conducted appropriately, these analyses can quickly save operation and maintenance costs in a potentially impactful manner. This chapter discusses wind turbine reliability bymore » highlighting the methodology of reliability engineering life data analysis. It first briefly discusses fundamentals for wind turbine reliability and the current industry status. Then, the reliability engineering method for life analysis, including data collection, model development, and forecasting, is presented in detail and illustrated through two case studies. The chapter concludes with some remarks on potential opportunities to improve wind turbine reliability. An owner and operator's perspective is taken and mechanical components are used to exemplify the potential benefits of reliability engineering analysis to improve wind turbine reliability and availability.« less

A Most Probable Point-Based Method for Reliability Analysis, Sensitivity Analysis and Design Optimization

NASA Technical Reports Server (NTRS)

Hou, Gene J.-W; Newman, Perry A. (Technical Monitor)

2004-01-01

A major step in a most probable point (MPP)-based method for reliability analysis is to determine the MPP. This is usually accomplished by using an optimization search algorithm. The minimum distance associated with the MPP provides a measurement of safety probability, which can be obtained by approximate probability integration methods such as FORM or SORM. The reliability sensitivity equations are derived first in this paper, based on the derivatives of the optimal solution. Examples are provided later to demonstrate the use of these derivatives for better reliability analysis and reliability-based design optimization (RBDO).

One-year test-retest reliability of intrinsic connectivity network fMRI in older adults

PubMed Central

Guo, Cong C.; Kurth, Florian; Zhou, Juan; Mayer, Emeran A.; Eickhoff, Simon B; Kramer, Joel H.; Seeley, William W.

2014-01-01

“Resting-state” or task-free fMRI can assess intrinsic connectivity network (ICN) integrity in health and disease, suggesting a potential for use of these methods as disease-monitoring biomarkers. Numerous analytical options are available, including model-driven ROI-based correlation analysis and model-free, independent component analysis (ICA). High test-retest reliability will be a necessary feature of a successful ICN biomarker, yet available reliability data remains limited. Here, we examined ICN fMRI test-retest reliability in 24 healthy older subjects scanned roughly one year apart. We focused on the salience network, a disease-relevant ICN not previously subjected to reliability analysis. Most ICN analytical methods proved reliable (intraclass coefficients > 0.4) and could be further improved by wavelet analysis. Seed-based ROI correlation analysis showed high map-wise reliability, whereas graph theoretical measures and temporal concatenation group ICA produced the most reliable individual unit-wise outcomes. Including global signal regression in ROI-based correlation analyses reduced reliability. Our study provides a direct comparison between the most commonly used ICN fMRI methods and potential guidelines for measuring intrinsic connectivity in aging control and patient populations over time. PMID:22446491

NASA Applications and Lessons Learned in Reliability Engineering

NASA Technical Reports Server (NTRS)

Safie, Fayssal M.; Fuller, Raymond P.

2011-01-01

Since the Shuttle Challenger accident in 1986, communities across NASA have been developing and extensively using quantitative reliability and risk assessment methods in their decision making process. This paper discusses several reliability engineering applications that NASA has used over the year to support the design, development, and operation of critical space flight hardware. Specifically, the paper discusses several reliability engineering applications used by NASA in areas such as risk management, inspection policies, components upgrades, reliability growth, integrated failure analysis, and physics based probabilistic engineering analysis. In each of these areas, the paper provides a brief discussion of a case study to demonstrate the value added and the criticality of reliability engineering in supporting NASA project and program decisions to fly safely. Examples of these case studies discussed are reliability based life limit extension of Shuttle Space Main Engine (SSME) hardware, Reliability based inspection policies for Auxiliary Power Unit (APU) turbine disc, probabilistic structural engineering analysis for reliability prediction of the SSME alternate turbo-pump development, impact of ET foam reliability on the Space Shuttle System risk, and reliability based Space Shuttle upgrade for safety. Special attention is given in this paper to the physics based probabilistic engineering analysis applications and their critical role in evaluating the reliability of NASA development hardware including their potential use in a research and technology development environment.

Bearing Procurement Analysis Method by Total Cost of Ownership Analysis and Reliability Prediction

NASA Astrophysics Data System (ADS)

Trusaji, Wildan; Akbar, Muhammad; Sukoyo; Irianto, Dradjad

2018-03-01

In making bearing procurement analysis, price and its reliability must be considered as decision criteria, since price determines the direct cost as acquisition cost and reliability of bearing determine the indirect cost such as maintenance cost. Despite the indirect cost is hard to identify and measured, it has high contribution to overall cost that will be incurred. So, the indirect cost of reliability must be considered when making bearing procurement analysis. This paper tries to explain bearing evaluation method with the total cost of ownership analysis to consider price and maintenance cost as decision criteria. Furthermore, since there is a lack of failure data when bearing evaluation phase is conducted, reliability prediction method is used to predict bearing reliability from its dynamic load rating parameter. With this method, bearing with a higher price but has higher reliability is preferable for long-term planning. But for short-term planning the cheaper one but has lower reliability is preferable. This contextuality can give rise to conflict between stakeholders. Thus, the planning horizon needs to be agreed by all stakeholder before making a procurement decision.

Probabilistic Finite Element Analysis & Design Optimization for Structural Designs

NASA Astrophysics Data System (ADS)

Deivanayagam, Arumugam

This study focuses on implementing probabilistic nature of material properties (Kevlar® 49) to the existing deterministic finite element analysis (FEA) of fabric based engine containment system through Monte Carlo simulations (MCS) and implementation of probabilistic analysis in engineering designs through Reliability Based Design Optimization (RBDO). First, the emphasis is on experimental data analysis focusing on probabilistic distribution models which characterize the randomness associated with the experimental data. The material properties of Kevlar® 49 are modeled using experimental data analysis and implemented along with an existing spiral modeling scheme (SMS) and user defined constitutive model (UMAT) for fabric based engine containment simulations in LS-DYNA. MCS of the model are performed to observe the failure pattern and exit velocities of the models. Then the solutions are compared with NASA experimental tests and deterministic results. MCS with probabilistic material data give a good prospective on results rather than a single deterministic simulation results. The next part of research is to implement the probabilistic material properties in engineering designs. The main aim of structural design is to obtain optimal solutions. In any case, in a deterministic optimization problem even though the structures are cost effective, it becomes highly unreliable if the uncertainty that may be associated with the system (material properties, loading etc.) is not represented or considered in the solution process. Reliable and optimal solution can be obtained by performing reliability optimization along with the deterministic optimization, which is RBDO. In RBDO problem formulation, in addition to structural performance constraints, reliability constraints are also considered. This part of research starts with introduction to reliability analysis such as first order reliability analysis, second order reliability analysis followed by simulation technique that are performed to obtain probability of failure and reliability of structures. Next, decoupled RBDO procedure is proposed with a new reliability analysis formulation with sensitivity analysis, which is performed to remove the highly reliable constraints in the RBDO, thereby reducing the computational time and function evaluations. Followed by implementation of the reliability analysis concepts and RBDO in finite element 2D truss problems and a planar beam problem are presented and discussed.

Integrating Reliability Analysis with a Performance Tool

NASA Technical Reports Server (NTRS)

Nicol, David M.; Palumbo, Daniel L.; Ulrey, Michael

1995-01-01

A large number of commercial simulation tools support performance oriented studies of complex computer and communication systems. Reliability of these systems, when desired, must be obtained by remodeling the system in a different tool. This has obvious drawbacks: (1) substantial extra effort is required to create the reliability model; (2) through modeling error the reliability model may not reflect precisely the same system as the performance model; (3) as the performance model evolves one must continuously reevaluate the validity of assumptions made in that model. In this paper we describe an approach, and a tool that implements this approach, for integrating a reliability analysis engine into a production quality simulation based performance modeling tool, and for modeling within such an integrated tool. The integrated tool allows one to use the same modeling formalisms to conduct both performance and reliability studies. We describe how the reliability analysis engine is integrated into the performance tool, describe the extensions made to the performance tool to support the reliability analysis, and consider the tool's performance.

Preliminary Analysis of LORAN-C System Reliability for Civil Aviation.

DTIC Science & Technology

1981-09-01

overviev of the analysis technique. Section 3 describes the computerized LORAN-C coverage model which is used extensively in the reliability analysis...Xth Plenary Assembly, Geneva, 1963, published by International Telecomunications Union. S. Braff, R., Computer program to calculate a Karkov Chain Reliability Model, unpublished york, MITRE Corporation. A-1 I.° , 44J Ili *Y 0E 00 ...F i8 1110 Prelim inary Analysis of Program Engineering & LORAN’C System ReliabilityMaintenance Service i ~Washington. D.C.

Comparative Analysis of the Reliability of Steel Structure with Pinned and Rigid Nodes Subjected to Fire

NASA Astrophysics Data System (ADS)

Kubicka, Katarzyna; Radoń, Urszula; Szaniec, Waldemar; Pawlak, Urszula

2017-10-01

The paper concerns the reliability analysis of steel structures subjected to high temperatures of fire gases. Two types of spatial structures were analysed, namely with pinned and rigid nodes. The fire analysis was carried out according to prescriptions of Eurocode. The static-strength analysis was conducted using the finite element method (FEM). The MES3D program, developed by Szaniec (Kielce University of Technology, Poland), was used for this purpose. The results received from MES3D made it possible to carry out the reliability analysis using the Numpress Explore program that was developed at the Institute of Fundamental Technological Research of the Polish Academy of Sciences [9]. The measurement of reliability of structures is the Hasofer-Lind reliability index (β). The reliability analysis was carried out according to approximation (FORM, SORM) and simulation (Importance Sampling, Monte Carlo) methods. As the fire progresses, the value of reliability index decreases. The analysis conducted for the study made it possible to evaluate the impact of node types on those changes. In real structures, it is often difficult to define correctly types of nodes, so some simplifications are made. The presented analysis contributes to the recognition of consequences of such assumptions for the safety of structures, subjected to fire.

Dynamic decision-making for reliability and maintenance analysis of manufacturing systems based on failure effects

NASA Astrophysics Data System (ADS)

Zhang, Ding; Zhang, Yingjie

2017-09-01

A framework for reliability and maintenance analysis of job shop manufacturing systems is proposed in this paper. An efficient preventive maintenance (PM) policy in terms of failure effects analysis (FEA) is proposed. Subsequently, reliability evaluation and component importance measure based on FEA are performed under the PM policy. A job shop manufacturing system is applied to validate the reliability evaluation and dynamic maintenance policy. Obtained results are compared with existed methods and the effectiveness is validated. Some vague understandings for issues such as network modelling, vulnerabilities identification, the evaluation criteria of repairable systems, as well as PM policy during manufacturing system reliability analysis are elaborated. This framework can help for reliability optimisation and rational maintenance resources allocation of job shop manufacturing systems.

Computational methods for efficient structural reliability and reliability sensitivity analysis

NASA Technical Reports Server (NTRS)

Wu, Y.-T.

1993-01-01

This paper presents recent developments in efficient structural reliability analysis methods. The paper proposes an efficient, adaptive importance sampling (AIS) method that can be used to compute reliability and reliability sensitivities. The AIS approach uses a sampling density that is proportional to the joint PDF of the random variables. Starting from an initial approximate failure domain, sampling proceeds adaptively and incrementally with the goal of reaching a sampling domain that is slightly greater than the failure domain to minimize over-sampling in the safe region. Several reliability sensitivity coefficients are proposed that can be computed directly and easily from the above AIS-based failure points. These probability sensitivities can be used for identifying key random variables and for adjusting design to achieve reliability-based objectives. The proposed AIS methodology is demonstrated using a turbine blade reliability analysis problem.

Meta-Analysis of Scale Reliability Using Latent Variable Modeling

ERIC Educational Resources Information Center

Raykov, Tenko; Marcoulides, George A.

2013-01-01

A latent variable modeling approach is outlined that can be used for meta-analysis of reliability coefficients of multicomponent measuring instruments. Important limitations of efforts to combine composite reliability findings across multiple studies are initially pointed out. A reliability synthesis procedure is discussed that is based on…

The Impact Analysis of Psychological Reliability of Population Pilot Study for Selection of Particular Reliable Multi-Choice Item Test in Foreign Language Research Work

ERIC Educational Resources Information Center

Fazeli, Seyed Hossein

2010-01-01

The purpose of research described in the current study is the psychological reliability, its importance, application, and more to investigate on the impact analysis of psychological reliability of population pilot study for selection of particular reliable multi-choice item test in foreign language research work. The population for subject…

Fundus autofluorescence findings in a mouse model of retinal detachment.

PubMed

Secondi, Roberta; Kong, Jian; Blonska, Anna M; Staurenghi, Giovanni; Sparrow, Janet R

2012-08-07

Fundus autofluorescence (fundus AF) changes were monitored in a mouse model of retinal detachment (RD). RD was induced by transscleral injection of hyaluronic acid (Healon) or sterile balanced salt solution (BSS) into the subretinal space of 4-5-day-old albino Abca4 null mutant and Abca4 wild-type mice. Images acquired by confocal scanning laser ophthalmoscopy (Spectralis HRA) were correlated with spectral domain optical coherence tomography (SD-OCT), infrared reflectance (IR), fluorescence spectroscopy, and histologic analysis. Results. In the area of detached retina, multiple hyperreflective spots in IR images corresponded to punctate areas of intense autofluorescence visible in fundus AF mode. The puncta exhibited changes in fluorescence intensity with time. SD-OCT disclosed undulations of the neural retina and hyperreflectivity of the photoreceptor layer that likely corresponded to histologically visible photoreceptor cell rosettes. Fluorescence emission spectra generated using flat-mounted retina, and 488 and 561 nm excitation, were similar to that of RPE lipofuscin. With increased excitation wavelength, the emission maximum shifted towards longer wavelengths, a characteristic typical of fundus autofluorescence. In detached retinas, hyper-autofluorescent spots appeared to originate from photoreceptor outer segments that were arranged within retinal folds and rosettes. Consistent with this interpretation is the finding that the autofluorescence was spectroscopically similar to the bisretinoids that constitute RPE lipofuscin. Under the conditions of a RD, abnormal autofluorescence may arise from excessive production of bisretinoid by impaired photoreceptor cells.

Fundus autofluorescence: applications and perspectives.

PubMed

Cuba, J; Gómez-Ulla, F

2013-02-01

To describe the findings of the study of autofluorescence of the different retinal diseases included in the study. To determine in which diseases autofluorescence may be more, or just as, useful as fluorescein angiography (FAG) in terms of diagnostic information. We studied the retinal autofluorescence of 123 eyes of 93 patients, including various diseases of the eye fundus. In all cases we explored the fundus, retinal autofluorescence, and, if indicated, FAG was performed. Analysis of the autofluorescence was performed using the Heidelberg Retina angiography Angiograph 2 (HRA2) Heidelberg Engineering (Germany). The autofluorescence information provided was equal or better (than FAG) in: 68.18% of cases of macular edema, 50% of pigment epithelium detachments, 100% of pigment epithelium atrophies, 100% of central serous chorioretinopathy; 55.55% of choroidal neovascularization, 100% of retinal dystrophies with deposition of lipofuscin, 100% of hard exudates and pre-retinal hemorrhages. Autofluorescence is a quick and non-invasive examination method, comfortable for both patient and examiner, and with a very short learning curve. It provides diagnostic information about many eye fundus diseases. While more studies and more experience with its use are needed, its interest lies in the possibility of avoiding the performing of angiography in patients with these diseases, and in the additional information autofluorescence provides about the functional situation of cells and retinal pigments. Copyright © 2011 Sociedad Española de Oftalmología. Published by Elsevier Espana. All rights reserved.

Examining individual factors according to health risk appraisal data as determinants of absenteeism among US utility employees.

PubMed

Marzec, Mary L; Scibelli, Andrew F; Edington, Dee W

2013-07-01

To investigate predictors of absenteeism and discuss potential implications for policy/program design. Health Risk Appraisal (HRA) data and self-reported and objective absenteeism (personnel records) were used to develop a structural equation model, controlling for age, sex, and job classification. A Medical Condition Burden Index (MCBI) was created by summing the number of self-reported medical conditions. Higher MCBI and stress were direct predictors of absenteeism. Physical activity was not associated with absenteeism but mediated both stress and MCBI. Because stress impacted both absenteeism and MCBI, organizations may benefit by placing stress management as a priority for wellness program and policy focus. Physical activity was not directly associated with absenteeism but was a mediating variable for stress and MCBI. Measures of stress and physical health may be more meaningful as outcome measures for physical activity programs than absenteeism.

VizieR Online Data Catalog: MWACS (Hurley-Walker+, 2014)

NASA Astrophysics Data System (ADS)

Hurley-Walker, N.; Morgan, J.; Wayth, R. B.; Hancock, P. J.; Bell, M. E.; Bernardi, G.; Bhat, N. D. R.; Briggs, F.; Deshpande, A. A.; Ewall-Wice, A.; Feng, L.; Hazelton, B. J.; Hindson, L.; Jacobs, D. C.; Kaplan, D. L.; Kudryavtseva, N.; Lenc, E.; McKinley, B.; Mitchell, D.; Pindor, B.; Procopio, P.; Oberoi, D.; Offringa, A.; Ord, S.; Riding, J.; Bowman, J. D.; Cappallo, R.; Corey, B.; Emrich, D.; Gaensler, B. M.; Goeke, R.; Greenhill, L.; Hewitt, J.; Johnston-Hollitt, M.; Kasper, J.; Kratzenberg, E.; Lonsdale, C.; Lynch, M.; McWhirter, R.; Morales, M. F.; Morgan, E.; Prabu, T.; Rogers, A.; Roshi, A.; Shankar, U.; Srivani, K.; Subrahmanyan, R.; Tingay, S.; Waterson, M.; Webster, R.; Whitney, A.; Williams, A.; Williams, C.

2014-10-01

The Murchison Widefield Array Commissioning Survey (MWACS) is a ~6100deg2 104-196MHz radio sky survey performed with the Murchison Widefield Array during instrument commissioning between 2012 September and 2012 December. The data were taken as meridian drift scans with two different 32-antenna sub-arrays that were available during the commissioning period. The data were combined in the visibility plane before being imaged, and then mosaicked. The survey covers approximately 20.5h

The Association of Employee Engagement at Work With Health Risks and Presenteeism.

PubMed

Burton, Wayne N; Chen, Chin-Yu; Li, Xingquan; Schultz, Alyssa B

2017-10-01

Employee engagement is a key factor in work performance and employee retention. The current study seeks to examine the relationship between employee engagement and health risks and productivity. In 2012, employees of a global financial services corporation participated in a health risk appraisal (HRA) which measured employee engagement, health risks, and on-the-job productivity loss (presenteeism). Three engagement categories were created. The highest engaged employees had significantly fewer health risk factors (69.7% overall low-risk status; 1.91 average health risks) and significantly less presenteeism (7.7%) than the mid engagement (67.9% low-risk, 1.98 risks, 9.2% presenteeism) and worst engagement (55.0% low-risk, 2.53 risks, 14.0% presenteeism) groups. Work engagement appears to be good for both the organization and the individual. Organizations may wish to make use of strategies which increase employee engagement.

Genetic Information Nondiscrimination Act. Final rule.

PubMed

2016-05-17

The Equal Employment Opportunity Commission (EEOC or Commission) is issuing a final rule to amend the regulations implementing Title II of the Genetic Information Nondiscrimination Act of 2008 as they relate to employer-sponsored wellness programs. This rule addresses the extent to which an employer may offer an inducement to an employee for the employee's spouse to provide information about the spouse's manifestation of disease or disorder as part of a health risk assessment (HRA) administered in connection with an employer-sponsored wellness program. Several technical changes to the existing regulations are included. Published elsewhere in this issue of the Federal Register, the EEOC also issued a final rule to amend the regulations and interpretive guidance implementing Title I of the Americans with Disabilities Act (ADA) that addresses the extent to which employers may use incentives to encourage employees to participate in wellness programs that ask them to respond to disability-related inquiries and/or undergo medical examinations.

Relationship between Physical Inactivity and Health Characteristics among Participants in an Employee Wellness Program

PubMed Central

Birdee, Gurjeet S.; Byrne, Daniel W.; McGown, Paula W.; Rothman, Russell L.; Rolando, Lori A.; Holmes, Marilyn C.; Yarbrough, Mary I.

2013-01-01

Objective To characterize factors associated with physical inactivity among employees with access to workplace wellness program. Methods We examined data on physical inactivity, defined as exercise less than once a week, from the 2010 health risk assessment (HRA) completed by employees at a major academic institution (n=16,976). Results Among employees, 18% individuals reported physical activity less than once a week. Individuals who were physically inactive as compared with physically active reported higher prevalence of cardiovascular diseases (AOR 1.36 [1.23–1.51], fair or poor health status (AOR 3.52 [2.97–4.17]) and absenteeism from work (AOR 1.59 [1.41–1.79]). Overall, physically inactive employees as compared to physically active employees reported more interest in health education programs. Conclusions Future research is needed to address barriers to physical inactivity to improve employee wellness and potentially lower health utility costs. PMID:23618884

Investigating the Reliability and Factor Structure of Kalichman's "Survey 2: Research Misconduct" Questionnaire: A Post Hoc Analysis Among Biomedical Doctoral Students in Scandinavia.

PubMed

Holm, Søren; Hofmann, Bjørn

2017-10-01

A precondition for reducing scientific misconduct is evidence about scientists' attitudes. We need reliable survey instruments, and this study investigates the reliability of Kalichman's "Survey 2: research misconduct" questionnaire. The study is a post hoc analysis of data from three surveys among biomedical doctoral students in Scandinavia (2010-2015). We perform reliability analysis, and exploratory and confirmatory factor analysis using a split-sample design as a partial validation. The results indicate that a reliable 13-item scale can be formed (Cronbach's α = .705), and factor analysis indicates that there are four reliable subscales each tapping a different construct: (a) general attitude to misconduct (α = .768), (b) attitude to personal misconduct (α = .784), (c) attitude to whistleblowing (α = .841), and (d) attitude to blameworthiness/punishment (α = .877). A full validation of the questionnaire requires further research. We, nevertheless, hope that the results will facilitate the increased use of the questionnaire in research.

Tackling reliability and construct validity: the systematic development of a qualitative protocol for skill and incident analysis.

PubMed

Savage, Trevor Nicholas; McIntosh, Andrew Stuart

2017-03-01

It is important to understand factors contributing to and directly causing sports injuries to improve the effectiveness and safety of sports skills. The characteristics of injury events must be evaluated and described meaningfully and reliably. However, many complex skills cannot be effectively investigated quantitatively because of ethical, technological and validity considerations. Increasingly, qualitative methods are being used to investigate human movement for research purposes, but there are concerns about reliability and measurement bias of such methods. Using the tackle in Rugby union as an example, we outline a systematic approach for developing a skill analysis protocol with a focus on improving objectivity, validity and reliability. Characteristics for analysis were selected using qualitative analysis and biomechanical theoretical models and epidemiological and coaching literature. An expert panel comprising subject matter experts provided feedback and the inter-rater reliability of the protocol was assessed using ten trained raters. The inter-rater reliability results were reviewed by the expert panel and the protocol was revised and assessed in a second inter-rater reliability study. Mean agreement in the second study improved and was comparable (52-90% agreement and ICC between 0.6 and 0.9) with other studies that have reported inter-rater reliability of qualitative analysis of human movement.

Psychometric Inferences from a Meta-Analysis of Reliability and Internal Consistency Coefficients

ERIC Educational Resources Information Center

Botella, Juan; Suero, Manuel; Gambara, Hilda

2010-01-01

A meta-analysis of the reliability of the scores from a specific test, also called reliability generalization, allows the quantitative synthesis of its properties from a set of studies. It is usually assumed that part of the variation in the reliability coefficients is due to some unknown and implicit mechanism that restricts and biases the…

Reliability of an Automated High-Resolution Manometry Analysis Program across Expert Users, Novice Users, and Speech-Language Pathologists

ERIC Educational Resources Information Center

Jones, Corinne A.; Hoffman, Matthew R.; Geng, Zhixian; Abdelhalim, Suzan M.; Jiang, Jack J.; McCulloch, Timothy M.

2014-01-01

Purpose: The purpose of this study was to investigate inter- and intrarater reliability among expert users, novice users, and speech-language pathologists with a semiautomated high-resolution manometry analysis program. We hypothesized that all users would have high intrarater reliability and high interrater reliability. Method: Three expert…

A Reliability Generalization Study of the Marlowe-Crowne Social Desirability Scale.

ERIC Educational Resources Information Center

Beretvas, S, Natasha; Meyers, Jason L.; Leite, Walter L.

2002-01-01

Conducted a reliability generalization study of the Marlowe-Crowne Social Desirability Scale (D. Crowne and D. Marlowe, 1960). Analysis of 93 studies show that the predicted score reliability for male adolescents was 0.53, and reliability for men's responses was lower than for women's. Discusses the need for further analysis of the scale. (SLD)

Reliability of videotaped observational gait analysis in patients with orthopedic impairments

PubMed Central

Brunnekreef, Jaap J; van Uden, Caro JT; van Moorsel, Steven; Kooloos, Jan GM

2005-01-01

Background In clinical practice, visual gait observation is often used to determine gait disorders and to evaluate treatment. Several reliability studies on observational gait analysis have been described in the literature and generally showed moderate reliability. However, patients with orthopedic disorders have received little attention. The objective of this study is to determine the reliability levels of visual observation of gait in patients with orthopedic disorders. Methods The gait of thirty patients referred to a physical therapist for gait treatment was videotaped. Ten raters, 4 experienced, 4 inexperienced and 2 experts, individually evaluated these videotaped gait patterns of the patients twice, by using a structured gait analysis form. Reliability levels were established by calculating the Intraclass Correlation Coefficient (ICC), using a two-way random design and based on absolute agreement. Results The inter-rater reliability among experienced raters (ICC = 0.42; 95%CI: 0.38–0.46) was comparable to that of the inexperienced raters (ICC = 0.40; 95%CI: 0.36–0.44). The expert raters reached a higher inter-rater reliability level (ICC = 0.54; 95%CI: 0.48–0.60). The average intra-rater reliability of the experienced raters was 0.63 (ICCs ranging from 0.57 to 0.70). The inexperienced raters reached an average intra-rater reliability of 0.57 (ICCs ranging from 0.52 to 0.62). The two expert raters attained ICC values of 0.70 and 0.74 respectively. Conclusion Structured visual gait observation by use of a gait analysis form as described in this study was found to be moderately reliable. Clinical experience appears to increase the reliability of visual gait analysis. PMID:15774012

Reliability generalization study of the Yale-Brown Obsessive-Compulsive Scale for children and adolescents.

PubMed

López-Pina, José Antonio; Sánchez-Meca, Julio; López-López, José Antonio; Marín-Martínez, Fulgencio; Núñez-Núñez, Rosa Ma; Rosa-Alcázar, Ana I; Gómez-Conesa, Antonia; Ferrer-Requena, Josefa

2015-01-01

The Yale-Brown Obsessive-Compulsive Scale for children and adolescents (CY-BOCS) is a frequently applied test to assess obsessive-compulsive symptoms. We conducted a reliability generalization meta-analysis on the CY-BOCS to estimate the average reliability, search for reliability moderators, and propose a predictive model that researchers and clinicians can use to estimate the expected reliability of the CY-BOCS scores. A total of 47 studies reporting a reliability coefficient with the data at hand were included in the meta-analysis. The results showed good reliability and a large variability associated to the standard deviation of total scores and sample size.

Alternative Methods for Calculating Intercoder Reliability in Content Analysis: Kappa, Weighted Kappa and Agreement Charts Procedures.

ERIC Educational Resources Information Center

Kang, Namjun

If content analysis is to satisfy the requirement of objectivity, measures and procedures must be reliable. Reliability is usually measured by the proportion of agreement of all categories identically coded by different coders. For such data to be empirically meaningful, a high degree of inter-coder reliability must be demonstrated. Researchers in…

Overview of RICOR's reliability theoretical analysis, accelerated life demonstration test results and verification by field data

NASA Astrophysics Data System (ADS)

Vainshtein, Igor; Baruch, Shlomi; Regev, Itai; Segal, Victor; Filis, Avishai; Riabzev, Sergey

2018-05-01

The growing demand for EO applications that work around the clock 24hr/7days a week, such as in border surveillance systems, emphasizes the need for a highly reliable cryocooler having increased operational availability and optimized system's Integrated Logistic Support (ILS). In order to meet this need, RICOR developed linear and rotary cryocoolers which achieved successfully this goal. Cryocoolers MTTF was analyzed by theoretical reliability evaluation methods, demonstrated by normal and accelerated life tests at Cryocooler level and finally verified by field data analysis derived from Cryocoolers operating at system level. The following paper reviews theoretical reliability analysis methods together with analyzing reliability test results derived from standard and accelerated life demonstration tests performed at Ricor's advanced reliability laboratory. As a summary for the work process, reliability verification data will be presented as a feedback from fielded systems.

Soft error evaluation and vulnerability analysis in Xilinx Zynq-7010 system-on chip

NASA Astrophysics Data System (ADS)

Du, Xuecheng; He, Chaohui; Liu, Shuhuan; Zhang, Yao; Li, Yonghong; Xiong, Ceng; Tan, Pengkang

2016-09-01

Radiation-induced soft errors are an increasingly important threat to the reliability of modern electronic systems. In order to evaluate system-on chip's reliability and soft error, the fault tree analysis method was used in this work. The system fault tree was constructed based on Xilinx Zynq-7010 All Programmable SoC. Moreover, the soft error rates of different components in Zynq-7010 SoC were tested by americium-241 alpha radiation source. Furthermore, some parameters that used to evaluate the system's reliability and safety were calculated using Isograph Reliability Workbench 11.0, such as failure rate, unavailability and mean time to failure (MTTF). According to fault tree analysis for system-on chip, the critical blocks and system reliability were evaluated through the qualitative and quantitative analysis.

The relationship between National Heart, Lung, and Blood Institute Weight Guidelines and concurrent medical costs in a manufacturing population.

PubMed

Wang, Feifei; Schultz, Alyssa B; Musich, Shirley; McDonald, Tim; Hirschland, David; Edington, Dee W

2003-01-01

To explore the relationship between the 1998 National Heart, Lung, and Blood Institute (NHLBI) weight guidelines and concurrent medical costs. Cross-sectional study. In a nationwide manufacturing corporation (General Motors Corporation). A total of 177,971 employees, retirees, and their adult dependents who were enrolled in Indemnity/PPO health insurance plan during the years 1996 and 1997 and completed one health risk appraisal (HRA) in the same period. The participants were categorized into six weight groups according to the NHLBI 1998 guidelines (body mass index [BMI] < 18.5, 18.5-24.9, 25-29.9, 30-34.9, 35-39.9, > or = 40 kg/m2). The height and weight data were collected by self-reported values on an HRA or biometric screening completed during 1996 to 1997. To represent the typical medical costs in a given group, the median, instead of mean, medical charges were used in this article. The annual median medical charges (including drug charges) for years 1996 and 1997 were compared among the six weight groups by using Wilcoxon rank sum tests. The differences in median charges were also tested between the normal weight group and the other five groups for each of the 10 gender-age subgroups (five age groups: 19-44, 45-54, 55-64, 65-74, 75+). Overall median medical costs were consistent with the NHLBI weight guidelines. The normal-weight group costs the least and both underweight and overweight-obesity groups cost more. The median medical costs of the six weight groups were $3184, $2225, $2388, $2801, $3182, and $3753, respectively, with statistical differences existing between any two groups of the last five categories. The underweight groups, especially in females, were not consistent with the guidelines in the two young groups (ages 19-44 and 45-54). An inconsistent relationship between medical costs and BMI groups was seen in the oldest males (age 75+). The six weight groups defined by the 1998 NHLBI guidelines are consistent with concurrent medical costs. Except for the underweight group (BMI < 18.5 kg/m2), medical costs gradually increased with BMI. Given that the prevalence of obesity continues to increase in western countries, effective weight control programs would help avoid a substantial amount of medical costs associated with overweight/obesity and related diseases.

Software reliability models for fault-tolerant avionics computers and related topics

NASA Technical Reports Server (NTRS)

Miller, Douglas R.

1987-01-01

Software reliability research is briefly described. General research topics are reliability growth models, quality of software reliability prediction, the complete monotonicity property of reliability growth, conceptual modelling of software failure behavior, assurance of ultrahigh reliability, and analysis techniques for fault-tolerant systems.

Development of a probabilistic analysis methodology for structural reliability estimation

NASA Technical Reports Server (NTRS)

Torng, T. Y.; Wu, Y.-T.

1991-01-01

The novel probabilistic analysis method for assessment of structural reliability presented, which combines fast-convolution with an efficient structural reliability analysis, can after identifying the most important point of a limit state proceed to establish a quadratic-performance function. It then transforms the quadratic function into a linear one, and applies fast convolution. The method is applicable to problems requiring computer-intensive structural analysis. Five illustrative examples of the method's application are given.

Error Propagation Analysis in the SAE Architecture Analysis and Design Language (AADL) and the EDICT Tool Framework

NASA Technical Reports Server (NTRS)

LaValley, Brian W.; Little, Phillip D.; Walter, Chris J.

2011-01-01

This report documents the capabilities of the EDICT tools for error modeling and error propagation analysis when operating with models defined in the Architecture Analysis & Design Language (AADL). We discuss our experience using the EDICT error analysis capabilities on a model of the Scalable Processor-Independent Design for Enhanced Reliability (SPIDER) architecture that uses the Reliable Optical Bus (ROBUS). Based on these experiences we draw some initial conclusions about model based design techniques for error modeling and analysis of highly reliable computing architectures.

Management of reliability and maintainability; a disciplined approach to fleet readiness

NASA Technical Reports Server (NTRS)

Willoughby, W. J., Jr.

1981-01-01

Material acquisition fundamentals were reviewed and include: mission profile definition, stress analysis, derating criteria, circuit reliability, failure modes, and worst case analysis. Military system reliability was examined with emphasis on the sparing of equipment. The Navy's organizational strategy for 1980 is presented.

Reliability of resting-state microstate features in electroencephalography.

PubMed

Khanna, Arjun; Pascual-Leone, Alvaro; Farzan, Faranak

2014-01-01

Electroencephalographic (EEG) microstate analysis is a method of identifying quasi-stable functional brain states ("microstates") that are altered in a number of neuropsychiatric disorders, suggesting their potential use as biomarkers of neurophysiological health and disease. However, use of EEG microstates as neurophysiological biomarkers requires assessment of the test-retest reliability of microstate analysis. We analyzed resting-state, eyes-closed, 30-channel EEG from 10 healthy subjects over 3 sessions spaced approximately 48 hours apart. We identified four microstate classes and calculated the average duration, frequency, and coverage fraction of these microstates. Using Cronbach's α and the standard error of measurement (SEM) as indicators of reliability, we examined: (1) the test-retest reliability of microstate features using a variety of different approaches; (2) the consistency between TAAHC and k-means clustering algorithms; and (3) whether microstate analysis can be reliably conducted with 19 and 8 electrodes. The approach of identifying a single set of "global" microstate maps showed the highest reliability (mean Cronbach's α > 0.8, SEM ≈ 10% of mean values) compared to microstates derived by each session or each recording. There was notably low reliability in features calculated from maps extracted individually for each recording, suggesting that the analysis is most reliable when maps are held constant. Features were highly consistent across clustering methods (Cronbach's α > 0.9). All features had high test-retest reliability with 19 and 8 electrodes. High test-retest reliability and cross-method consistency of microstate features suggests their potential as biomarkers for assessment of the brain's neurophysiological health.

Hydrological resiliency in the Western Boreal Plains: classification of hydrological responses using wavelet analysis to assess landscape resilience

NASA Astrophysics Data System (ADS)

Probert, Samantha; Kettridge, Nicholas; Devito, Kevin; Hannah, David; Parkin, Geoff

2017-04-01

The Boreal represents a system of substantial resilience to climate change, with minimal ecological change over the past 6000 years. However, unprecedented climatic warming, coupled with catchment disturbances could exceed thresholds of hydrological function in the Western Boreal Plains. Knowledge of ecohydrological and climatic feedbacks that shape the resilience of boreal forests has advanced significantly in recent years, but this knowledge is yet to be applied and understood at landscape scales. Hydrological modelling at the landscape scale is challenging in the WBP due to diverse, non-topographically driven hydrology across the mosaic of terrestrial and aquatic ecosystems. This study functionally divides the geologic and ecological components of the landscape into Hydrologic Response Areas (HRAs) and wetland, forestland, interface and pond Hydrologic Units (HUs) to accurately characterise water storage and infer transmission at multiple spatial and temporal scales. Wavelet analysis is applied to pond and groundwater levels to describe the patterns of water storage in response to climate signals; to isolate dominant controls on hydrological responses and to assess the relative importance of physical controls between wet and dry climates. This identifies which components of the landscape exhibit greater magnitude and frequency of variability to wetting and drying trends, further to testing the hierarchical framework for hydrological storage controls of: climate, bedrock geology, surficial geology, soil, vegetation, and topography. Classifying HRA and HU hydrological function is essential to understand and predict water storage and redistribution through drought cycles and wet periods. This work recognises which landscape components are most sensitive under climate change and disturbance and also creates scope for hydrological resiliency research in Boreal systems by recognising critical landscape components and their role in landscape collapse or catastrophic shift in ecosystem function under future climatic scenarios.

Risk factors for infection by oncogenic human papillomaviruses in HIV-positive MSM patients in the ART era (2010-2016).

PubMed

Hidalgo-Tenorio, Carmen; Gil-Anguita, Concepción; Ramírez-Taboada, Jessica; Esquivias, Javier; López-Ruz, Miguel A; Balgahata, Omar Mohamed; Javier-Martinez, Rosario; Pasquau, Juan

2017-09-01

Squamous cell carcinoma of anus (SCCA) is one of the most frequent non-AIDS-defining diseases in HIV patients, mainly in men who have sex with men (MSM), and it is associated with human papillomavirus (HPV) infection.To determine the prevalence of high-risk HPV (HR-HPV) genotypes, premalignant lesions (HSIL) and SCCA in a cohort of HIV-positive MSM; to study the distribution of HPV genotypes according to anal histology results; and to analyze risk factors for this infection.This prospective single-center study was conducted between May 2010 and September 2016. At the study visit, cotton swabs were used to collect anal samples for cytology study in ThinPrep Pap Test liquid medium (Thin Prep Processor 2000, Hologic Corp, USA), and for HPV PCR (Linear Array HPV Genotyping Test). After, high-resolution anoscopy (HRA) (Zeiss 150 fc) was carried out. Logistic regression analysis was performed to identify risk factors for HR-HPV infection.The study included 319 patients, with mean age of 36.7 years; HR-HPV was detected in 81.3%. The prevalence of HSIL was 13.5% and SCCA was 0.3%. With regard to the distribution of HPV genotypes according to histology results, HPV 16 was the most frequent genotype in normal anal mucosa (26.7%), in LSILs (36.9%), and in HSILs (38%). In multivariate analysis, CD4 nadir < 200 cells/μL was the factor associated with infection by HR-HPV (OR 3.66, 95% CI 1.05%-12.75%).HIV-positive MSM showed a high prevalence of HSIL+ lesions and of infection by oncogenic HPV, which appears to be favored by a deficient immune system. HPV 16 was the most frequently isolated genotype in anal mucosa, regardless of lesion type.

Multidisciplinary System Reliability Analysis

NASA Technical Reports Server (NTRS)

Mahadevan, Sankaran; Han, Song; Chamis, Christos C. (Technical Monitor)

2001-01-01

The objective of this study is to develop a new methodology for estimating the reliability of engineering systems that encompass multiple disciplines. The methodology is formulated in the context of the NESSUS probabilistic structural analysis code, developed under the leadership of NASA Glenn Research Center. The NESSUS code has been successfully applied to the reliability estimation of a variety of structural engineering systems. This study examines whether the features of NESSUS could be used to investigate the reliability of systems in other disciplines such as heat transfer, fluid mechanics, electrical circuits etc., without considerable programming effort specific to each discipline. In this study, the mechanical equivalence between system behavior models in different disciplines are investigated to achieve this objective. A new methodology is presented for the analysis of heat transfer, fluid flow, and electrical circuit problems using the structural analysis routines within NESSUS, by utilizing the equivalence between the computational quantities in different disciplines. This technique is integrated with the fast probability integration and system reliability techniques within the NESSUS code, to successfully compute the system reliability of multidisciplinary systems. Traditional as well as progressive failure analysis methods for system reliability estimation are demonstrated, through a numerical example of a heat exchanger system involving failure modes in structural, heat transfer and fluid flow disciplines.

Multi-Disciplinary System Reliability Analysis

NASA Technical Reports Server (NTRS)

Mahadevan, Sankaran; Han, Song

1997-01-01

The objective of this study is to develop a new methodology for estimating the reliability of engineering systems that encompass multiple disciplines. The methodology is formulated in the context of the NESSUS probabilistic structural analysis code developed under the leadership of NASA Lewis Research Center. The NESSUS code has been successfully applied to the reliability estimation of a variety of structural engineering systems. This study examines whether the features of NESSUS could be used to investigate the reliability of systems in other disciplines such as heat transfer, fluid mechanics, electrical circuits etc., without considerable programming effort specific to each discipline. In this study, the mechanical equivalence between system behavior models in different disciplines are investigated to achieve this objective. A new methodology is presented for the analysis of heat transfer, fluid flow, and electrical circuit problems using the structural analysis routines within NESSUS, by utilizing the equivalence between the computational quantities in different disciplines. This technique is integrated with the fast probability integration and system reliability techniques within the NESSUS code, to successfully compute the system reliability of multi-disciplinary systems. Traditional as well as progressive failure analysis methods for system reliability estimation are demonstrated, through a numerical example of a heat exchanger system involving failure modes in structural, heat transfer and fluid flow disciplines.

A Passive System Reliability Analysis for a Station Blackout

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brunett, Acacia; Bucknor, Matthew; Grabaskas, David

2015-05-03

The latest iterations of advanced reactor designs have included increased reliance on passive safety systems to maintain plant integrity during unplanned sequences. While these systems are advantageous in reducing the reliance on human intervention and availability of power, the phenomenological foundations on which these systems are built require a novel approach to a reliability assessment. Passive systems possess the unique ability to fail functionally without failing physically, a result of their explicit dependency on existing boundary conditions that drive their operating mode and capacity. Argonne National Laboratory is performing ongoing analyses that demonstrate various methodologies for the characterization of passivemore » system reliability within a probabilistic framework. Two reliability analysis techniques are utilized in this work. The first approach, the Reliability Method for Passive Systems, provides a mechanistic technique employing deterministic models and conventional static event trees. The second approach, a simulation-based technique, utilizes discrete dynamic event trees to treat time- dependent phenomena during scenario evolution. For this demonstration analysis, both reliability assessment techniques are used to analyze an extended station blackout in a pool-type sodium fast reactor (SFR) coupled with a reactor cavity cooling system (RCCS). This work demonstrates the entire process of a passive system reliability analysis, including identification of important parameters and failure metrics, treatment of uncertainties and analysis of results.« less

Reliability Generalization (RG) Analysis: The Test Is Not Reliable

ERIC Educational Resources Information Center

Warne, Russell

2008-01-01

Literature shows that most researchers are unaware of some of the characteristics of reliability. This paper clarifies some misconceptions by describing the procedures, benefits, and limitations of reliability generalization while using it to illustrate the nature of score reliability. Reliability generalization (RG) is a meta-analytic method…

The 747 primary flight control systems reliability and maintenance study

NASA Technical Reports Server (NTRS)

1979-01-01

The major operational characteristics of the 747 Primary Flight Control Systems (PFCS) are described. Results of reliability analysis for separate control functions are presented. The analysis makes use of a NASA computer program which calculates reliability of redundant systems. Costs for maintaining the 747 PFCS in airline service are assessed. The reliabilities and cost will provide a baseline for use in trade studies of future flight control system design.

Software analysis handbook: Software complexity analysis and software reliability estimation and prediction

NASA Technical Reports Server (NTRS)

Lee, Alice T.; Gunn, Todd; Pham, Tuan; Ricaldi, Ron

1994-01-01

This handbook documents the three software analysis processes the Space Station Software Analysis team uses to assess space station software, including their backgrounds, theories, tools, and analysis procedures. Potential applications of these analysis results are also presented. The first section describes how software complexity analysis provides quantitative information on code, such as code structure and risk areas, throughout the software life cycle. Software complexity analysis allows an analyst to understand the software structure, identify critical software components, assess risk areas within a software system, identify testing deficiencies, and recommend program improvements. Performing this type of analysis during the early design phases of software development can positively affect the process, and may prevent later, much larger, difficulties. The second section describes how software reliability estimation and prediction analysis, or software reliability, provides a quantitative means to measure the probability of failure-free operation of a computer program, and describes the two tools used by JSC to determine failure rates and design tradeoffs between reliability, costs, performance, and schedule.

Computing Reliabilities Of Ceramic Components Subject To Fracture

NASA Technical Reports Server (NTRS)

Nemeth, N. N.; Gyekenyesi, J. P.; Manderscheid, J. M.

1992-01-01

CARES calculates fast-fracture reliability or failure probability of macroscopically isotropic ceramic components. Program uses results from commercial structural-analysis program (MSC/NASTRAN or ANSYS) to evaluate reliability of component in presence of inherent surface- and/or volume-type flaws. Computes measure of reliability by use of finite-element mathematical model applicable to multiple materials in sense model made function of statistical characterizations of many ceramic materials. Reliability analysis uses element stress, temperature, area, and volume outputs, obtained from two-dimensional shell and three-dimensional solid isoparametric or axisymmetric finite elements. Written in FORTRAN 77.

Validity and reliability of acoustic analysis of respiratory sounds in infants

PubMed Central

Elphick, H; Lancaster, G; Solis, A; Majumdar, A; Gupta, R; Smyth, R

2004-01-01

Objective: To investigate the validity and reliability of computerised acoustic analysis in the detection of abnormal respiratory noises in infants. Methods: Blinded, prospective comparison of acoustic analysis with stethoscope examination. Validity and reliability of acoustic analysis were assessed by calculating the degree of observer agreement using the κ statistic with 95% confidence intervals (CI). Results: 102 infants under 18 months were recruited. Convergent validity for agreement between stethoscope examination and acoustic analysis was poor for wheeze (κ = 0.07 (95% CI, –0.13 to 0.26)) and rattles (κ = 0.11 (–0.05 to 0.27)) and fair for crackles (κ = 0.36 (0.18 to 0.54)). Both the stethoscope and acoustic analysis distinguished well between sounds (discriminant validity). Agreement between observers for the presence of wheeze was poor for both stethoscope examination and acoustic analysis. Agreement for rattles was moderate for the stethoscope but poor for acoustic analysis. Agreement for crackles was moderate using both techniques. Within-observer reliability for all sounds using acoustic analysis was moderate to good. Conclusions: The stethoscope is unreliable for assessing respiratory sounds in infants. This has important implications for its use as a diagnostic tool for lung disorders in infants, and confirms that it cannot be used as a gold standard. Because of the unreliability of the stethoscope, the validity of acoustic analysis could not be demonstrated, although it could discriminate between sounds well and showed good within-observer reliability. For acoustic analysis, targeted training and the development of computerised pattern recognition systems may improve reliability so that it can be used in clinical practice. PMID:15499065

Comprehensive Design Reliability Activities for Aerospace Propulsion Systems

NASA Technical Reports Server (NTRS)

Christenson, R. L.; Whitley, M. R.; Knight, K. C.

2000-01-01

This technical publication describes the methodology, model, software tool, input data, and analysis result that support aerospace design reliability studies. The focus of these activities is on propulsion systems mechanical design reliability. The goal of these activities is to support design from a reliability perspective. Paralleling performance analyses in schedule and method, this requires the proper use of metrics in a validated reliability model useful for design, sensitivity, and trade studies. Design reliability analysis in this view is one of several critical design functions. A design reliability method is detailed and two example analyses are provided-one qualitative and the other quantitative. The use of aerospace and commercial data sources for quantification is discussed and sources listed. A tool that was developed to support both types of analyses is presented. Finally, special topics discussed include the development of design criteria, issues of reliability quantification, quality control, and reliability verification.

Applying reliability analysis to design electric power systems for More-electric aircraft

NASA Astrophysics Data System (ADS)

Zhang, Baozhu

The More-Electric Aircraft (MEA) is a type of aircraft that replaces conventional hydraulic and pneumatic systems with electrically powered components. These changes have significantly challenged the aircraft electric power system design. This thesis investigates how reliability analysis can be applied to automatically generate system topologies for the MEA electric power system. We first use a traditional method of reliability block diagrams to analyze the reliability level on different system topologies. We next propose a new methodology in which system topologies, constrained by a set reliability level, are automatically generated. The path-set method is used for analysis. Finally, we interface these sets of system topologies with control synthesis tools to automatically create correct-by-construction control logic for the electric power system.

Durability reliability analysis for corroding concrete structures under uncertainty

NASA Astrophysics Data System (ADS)

Zhang, Hao

2018-02-01

This paper presents a durability reliability analysis of reinforced concrete structures subject to the action of marine chloride. The focus is to provide insight into the role of epistemic uncertainties on durability reliability. The corrosion model involves a number of variables whose probabilistic characteristics cannot be fully determined due to the limited availability of supporting data. All sources of uncertainty, both aleatory and epistemic, should be included in the reliability analysis. Two methods are available to formulate the epistemic uncertainty: the imprecise probability-based method and the purely probabilistic method in which the epistemic uncertainties are modeled as random variables. The paper illustrates how the epistemic uncertainties are modeled and propagated in the two methods, and shows how epistemic uncertainties govern the durability reliability.

The weakest t-norm based intuitionistic fuzzy fault-tree analysis to evaluate system reliability.

PubMed

Kumar, Mohit; Yadav, Shiv Prasad

2012-07-01

In this paper, a new approach of intuitionistic fuzzy fault-tree analysis is proposed to evaluate system reliability and to find the most critical system component that affects the system reliability. Here weakest t-norm based intuitionistic fuzzy fault tree analysis is presented to calculate fault interval of system components from integrating expert's knowledge and experience in terms of providing the possibility of failure of bottom events. It applies fault-tree analysis, α-cut of intuitionistic fuzzy set and T(ω) (the weakest t-norm) based arithmetic operations on triangular intuitionistic fuzzy sets to obtain fault interval and reliability interval of the system. This paper also modifies Tanaka et al.'s fuzzy fault-tree definition. In numerical verification, a malfunction of weapon system "automatic gun" is presented as a numerical example. The result of the proposed method is compared with the listing approaches of reliability analysis methods. Copyright © 2012 ISA. Published by Elsevier Ltd. All rights reserved.

Reliability Analysis of Retaining Walls Subjected to Blast Loading by Finite Element Approach

NASA Astrophysics Data System (ADS)

GuhaRay, Anasua; Mondal, Stuti; Mohiuddin, Hisham Hasan

2018-02-01

Conventional design methods adopt factor of safety as per practice and experience, which are deterministic in nature. The limit state method, though not completely deterministic, does not take into account effect of design parameters, which are inherently variable such as cohesion, angle of internal friction, etc. for soil. Reliability analysis provides a measure to consider these variations into analysis and hence results in a more realistic design. Several studies have been carried out on reliability of reinforced concrete walls and masonry walls under explosions. Also, reliability analysis of retaining structures against various kinds of failure has been done. However, very few research works are available on reliability analysis of retaining walls subjected to blast loading. Thus, the present paper considers the effect of variation of geotechnical parameters when a retaining wall is subjected to blast loading. However, it is found that the variation of geotechnical random variables does not have a significant effect on the stability of retaining walls subjected to blast loading.

NASCOM network: Ground communications reliability report

NASA Technical Reports Server (NTRS)

1973-01-01

A reliability performance analysis of the NASCOM Network circuits is reported. Network performance narrative summary is presented to include significant changes in circuit configurations, current figures, and trends in each trouble category with notable circuit totals specified. Lost time and interruption tables listing circuits which were affected by outages showing their totals category are submitted. A special analysis of circuits with low reliabilities is developed with tables depicting the performance and graphs for individual reliabilities.

Theory of reliable systems. [systems analysis and design

NASA Technical Reports Server (NTRS)

Meyer, J. F.

1973-01-01

The analysis and design of reliable systems are discussed. The attributes of system reliability studied are fault tolerance, diagnosability, and reconfigurability. Objectives of the study include: to determine properties of system structure that are conducive to a particular attribute; to determine methods for obtaining reliable realizations of a given system; and to determine how properties of system behavior relate to the complexity of fault tolerant realizations. A list of 34 references is included.

Rocket engine system reliability analyses using probabilistic and fuzzy logic techniques

NASA Technical Reports Server (NTRS)

Hardy, Terry L.; Rapp, Douglas C.

1994-01-01

The reliability of rocket engine systems was analyzed by using probabilistic and fuzzy logic techniques. Fault trees were developed for integrated modular engine (IME) and discrete engine systems, and then were used with the two techniques to quantify reliability. The IRRAS (Integrated Reliability and Risk Analysis System) computer code, developed for the U.S. Nuclear Regulatory Commission, was used for the probabilistic analyses, and FUZZYFTA (Fuzzy Fault Tree Analysis), a code developed at NASA Lewis Research Center, was used for the fuzzy logic analyses. Although both techniques provided estimates of the reliability of the IME and discrete systems, probabilistic techniques emphasized uncertainty resulting from randomness in the system whereas fuzzy logic techniques emphasized uncertainty resulting from vagueness in the system. Because uncertainty can have both random and vague components, both techniques were found to be useful tools in the analysis of rocket engine system reliability.

Reliability analysis method of a solar array by using fault tree analysis and fuzzy reasoning Petri net

NASA Astrophysics Data System (ADS)

Wu, Jianing; Yan, Shaoze; Xie, Liyang

2011-12-01

To address the impact of solar array anomalies, it is important to perform analysis of the solar array reliability. This paper establishes the fault tree analysis (FTA) and fuzzy reasoning Petri net (FRPN) models of a solar array mechanical system and analyzes reliability to find mechanisms of the solar array fault. The index final truth degree (FTD) and cosine matching function (CMF) are employed to resolve the issue of how to evaluate the importance and influence of different faults. So an improvement reliability analysis method is developed by means of the sorting of FTD and CMF. An example is analyzed using the proposed method. The analysis results show that harsh thermal environment and impact caused by particles in space are the most vital causes of the solar array fault. Furthermore, other fault modes and the corresponding improvement methods are discussed. The results reported in this paper could be useful for the spacecraft designers, particularly, in the process of redesigning the solar array and scheduling its reliability growth plan.

[Reliability theory based on quality risk network analysis for Chinese medicine injection].

PubMed

Li, Zheng; Kang, Li-Yuan; Fan, Xiao-Hui

2014-08-01

A new risk analysis method based upon reliability theory was introduced in this paper for the quality risk management of Chinese medicine injection manufacturing plants. The risk events including both cause and effect ones were derived in the framework as nodes with a Bayesian network analysis approach. It thus transforms the risk analysis results from failure mode and effect analysis (FMEA) into a Bayesian network platform. With its structure and parameters determined, the network can be used to evaluate the system reliability quantitatively with probabilistic analytical appraoches. Using network analysis tools such as GeNie and AgenaRisk, we are able to find the nodes that are most critical to influence the system reliability. The importance of each node to the system can be quantitatively evaluated by calculating the effect of the node on the overall risk, and minimization plan can be determined accordingly to reduce their influences and improve the system reliability. Using the Shengmai injection manufacturing plant of SZYY Ltd as a user case, we analyzed the quality risk with both static FMEA analysis and dynamic Bayesian Network analysis. The potential risk factors for the quality of Shengmai injection manufacturing were identified with the network analysis platform. Quality assurance actions were further defined to reduce the risk and improve the product quality.

Reliability analysis in the Office of Safety, Environmental, and Mission Assurance (OSEMA)

NASA Astrophysics Data System (ADS)

Kauffmann, Paul J.

1994-12-01

The technical personnel in the SEMA office are working to provide the highest degree of value-added activities to their support of the NASA Langley Research Center mission. Management perceives that reliability analysis tools and an understanding of a comprehensive systems approach to reliability will be a foundation of this change process. Since the office is involved in a broad range of activities supporting space mission projects and operating activities (such as wind tunnels and facilities), it was not clear what reliability tools the office should be familiar with and how these tools could serve as a flexible knowledge base for organizational growth. Interviews and discussions with the office personnel (both technicians and engineers) revealed that job responsibilities ranged from incoming inspection to component or system analysis to safety and risk. It was apparent that a broad base in applied probability and reliability along with tools for practical application was required by the office. A series of ten class sessions with a duration of two hours each was organized and scheduled. Hand-out materials were developed and practical examples based on the type of work performed by the office personnel were included. Topics covered were: Reliability Systems - a broad system oriented approach to reliability; Probability Distributions - discrete and continuous distributions; Sampling and Confidence Intervals - random sampling and sampling plans; Data Analysis and Estimation - Model selection and parameter estimates; and Reliability Tools - block diagrams, fault trees, event trees, FMEA. In the future, this information will be used to review and assess existing equipment and processes from a reliability system perspective. An analysis of incoming materials sampling plans was also completed. This study looked at the issues associated with Mil Std 105 and changes for a zero defect acceptance sampling plan.

Reliability analysis in the Office of Safety, Environmental, and Mission Assurance (OSEMA)

NASA Technical Reports Server (NTRS)

Kauffmann, Paul J.

1994-01-01

The technical personnel in the SEMA office are working to provide the highest degree of value-added activities to their support of the NASA Langley Research Center mission. Management perceives that reliability analysis tools and an understanding of a comprehensive systems approach to reliability will be a foundation of this change process. Since the office is involved in a broad range of activities supporting space mission projects and operating activities (such as wind tunnels and facilities), it was not clear what reliability tools the office should be familiar with and how these tools could serve as a flexible knowledge base for organizational growth. Interviews and discussions with the office personnel (both technicians and engineers) revealed that job responsibilities ranged from incoming inspection to component or system analysis to safety and risk. It was apparent that a broad base in applied probability and reliability along with tools for practical application was required by the office. A series of ten class sessions with a duration of two hours each was organized and scheduled. Hand-out materials were developed and practical examples based on the type of work performed by the office personnel were included. Topics covered were: Reliability Systems - a broad system oriented approach to reliability; Probability Distributions - discrete and continuous distributions; Sampling and Confidence Intervals - random sampling and sampling plans; Data Analysis and Estimation - Model selection and parameter estimates; and Reliability Tools - block diagrams, fault trees, event trees, FMEA. In the future, this information will be used to review and assess existing equipment and processes from a reliability system perspective. An analysis of incoming materials sampling plans was also completed. This study looked at the issues associated with Mil Std 105 and changes for a zero defect acceptance sampling plan.

Fundus Autofluorescence Findings in a Mouse Model of Retinal Detachment

PubMed Central

Secondi, Roberta; Kong, Jian; Blonska, Anna M.; Staurenghi, Giovanni; Sparrow, Janet R.

2012-01-01

Purpose. Fundus autofluorescence (fundus AF) changes were monitored in a mouse model of retinal detachment (RD). Methods. RD was induced by transscleral injection of hyaluronic acid (Healon) or sterile balanced salt solution (BSS) into the subretinal space of 4–5-day-old albino Abca4 null mutant and Abca4 wild-type mice. Images acquired by confocal scanning laser ophthalmoscopy (Spectralis HRA) were correlated with spectral domain optical coherence tomography (SD-OCT), infrared reflectance (IR), fluorescence spectroscopy, and histologic analysis. Results. In the area of detached retina, multiple hyperreflective spots in IR images corresponded to punctate areas of intense autofluorescence visible in fundus AF mode. The puncta exhibited changes in fluorescence intensity with time. SD-OCT disclosed undulations of the neural retina and hyperreflectivity of the photoreceptor layer that likely corresponded to histologically visible photoreceptor cell rosettes. Fluorescence emission spectra generated using flat-mounted retina, and 488 and 561 nm excitation, were similar to that of RPE lipofuscin. With increased excitation wavelength, the emission maximum shifted towards longer wavelengths, a characteristic typical of fundus autofluorescence. Conclusions. In detached retinas, hyper-autofluorescent spots appeared to originate from photoreceptor outer segments that were arranged within retinal folds and rosettes. Consistent with this interpretation is the finding that the autofluorescence was spectroscopically similar to the bisretinoids that constitute RPE lipofuscin. Under the conditions of a RD, abnormal autofluorescence may arise from excessive production of bisretinoid by impaired photoreceptor cells. PMID:22786896

Reliability Analysis for the Internationally Administered 2002 Series GED Tests. GED Testing Service[R] Research Studies, 2009-3

ERIC Educational Resources Information Center

Setzer, J. Carl; He, Yi

2009-01-01

Reliability Analysis for the Internationally Administered 2002 Series GED (General Educational Development) Tests Reliability refers to the consistency, or stability, of test scores when the authors administer the measurement procedure repeatedly to groups of examinees (American Educational Research Association [AERA], American Psychological…

A General Approach for Estimating Scale Score Reliability for Panel Survey Data

ERIC Educational Resources Information Center

Biemer, Paul P.; Christ, Sharon L.; Wiesen, Christopher A.

2009-01-01

Scale score measures are ubiquitous in the psychological literature and can be used as both dependent and independent variables in data analysis. Poor reliability of scale score measures leads to inflated standard errors and/or biased estimates, particularly in multivariate analysis. Reliability estimation is usually an integral step to assess…

Bayesian Inference for NASA Probabilistic Risk and Reliability Analysis

NASA Technical Reports Server (NTRS)

Dezfuli, Homayoon; Kelly, Dana; Smith, Curtis; Vedros, Kurt; Galyean, William

2009-01-01

This document, Bayesian Inference for NASA Probabilistic Risk and Reliability Analysis, is intended to provide guidelines for the collection and evaluation of risk and reliability-related data. It is aimed at scientists and engineers familiar with risk and reliability methods and provides a hands-on approach to the investigation and application of a variety of risk and reliability data assessment methods, tools, and techniques. This document provides both: A broad perspective on data analysis collection and evaluation issues. A narrow focus on the methods to implement a comprehensive information repository. The topics addressed herein cover the fundamentals of how data and information are to be used in risk and reliability analysis models and their potential role in decision making. Understanding these topics is essential to attaining a risk informed decision making environment that is being sought by NASA requirements and procedures such as 8000.4 (Agency Risk Management Procedural Requirements), NPR 8705.05 (Probabilistic Risk Assessment Procedures for NASA Programs and Projects), and the System Safety requirements of NPR 8715.3 (NASA General Safety Program Requirements).

Reliability Impacts in Life Support Architecture and Technology Selection

NASA Technical Reports Server (NTRS)

Lange Kevin E.; Anderson, Molly S.

2012-01-01

Quantitative assessments of system reliability and equivalent system mass (ESM) were made for different life support architectures based primarily on International Space Station technologies. The analysis was applied to a one-year deep-space mission. System reliability was increased by adding redundancy and spares, which added to the ESM. Results were thus obtained allowing a comparison of the ESM for each architecture at equivalent levels of reliability. Although the analysis contains numerous simplifications and uncertainties, the results suggest that achieving necessary reliabilities for deep-space missions will add substantially to the life support ESM and could influence the optimal degree of life support closure. Approaches for reducing reliability impacts were investigated and are discussed.

Software Reliability, Measurement, and Testing. Volume 2. Guidebook for Software Reliability Measurement and Testing

DTIC Science & Technology

1992-04-01

contractor’s existing data collection, analysis and corrective action system shall be utilized, with modification only as necessary to meet the...either from test or from analysis of field data . The procedures of MIL-STD-756B assume that the reliability of a 18 DEFINE IDENTIFY SOFTWARE LIFE CYCLE...to generate sufficient data to report a statistically valid reliability figure for a class of software. Casual data gathering accumulates data more

The reliability of nonlinear least-squares algorithm for data analysis of neural response activity during sinusoidal rotational stimulation in semicircular canal neurons.

PubMed

Ren, Pengyu; Li, Bowen; Dong, Shiyao; Chen, Lin; Zhang, Yuelin

2018-01-01

Although many mathematical methods were used to analyze the neural activity under sinusoidal stimulation within linear response range in vestibular system, the reliabilities of these methods are still not reported, especially in nonlinear response range. Here we chose nonlinear least-squares algorithm (NLSA) with sinusoidal model to analyze the neural response of semicircular canal neurons (SCNs) during sinusoidal rotational stimulation (SRS) over a nonlinear response range. Our aim was to acquire a reliable mathematical method for data analysis under SRS in vestibular system. Our data indicated that the reliability of this method in an entire SCNs population was quite satisfactory. However, the reliability was strongly negatively depended on the neural discharge regularity. In addition, stimulation parameters were the vital impact factors influencing the reliability. The frequency had a significant negative effect but the amplitude had a conspicuous positive effect on the reliability. Thus, NLSA with sinusoidal model resulted a reliable mathematical tool for data analysis of neural response activity under SRS in vestibular system and more suitable for those under the stimulation with low frequency but high amplitude, suggesting that this method can be used in nonlinear response range. This method broke out of the restriction of neural activity analysis under nonlinear response range and provided a solid foundation for future study in nonlinear response range in vestibular system.

The reliability of nonlinear least-squares algorithm for data analysis of neural response activity during sinusoidal rotational stimulation in semicircular canal neurons

PubMed Central

Li, Bowen; Dong, Shiyao; Chen, Lin; Zhang, Yuelin

2018-01-01

Although many mathematical methods were used to analyze the neural activity under sinusoidal stimulation within linear response range in vestibular system, the reliabilities of these methods are still not reported, especially in nonlinear response range. Here we chose nonlinear least-squares algorithm (NLSA) with sinusoidal model to analyze the neural response of semicircular canal neurons (SCNs) during sinusoidal rotational stimulation (SRS) over a nonlinear response range. Our aim was to acquire a reliable mathematical method for data analysis under SRS in vestibular system. Our data indicated that the reliability of this method in an entire SCNs population was quite satisfactory. However, the reliability was strongly negatively depended on the neural discharge regularity. In addition, stimulation parameters were the vital impact factors influencing the reliability. The frequency had a significant negative effect but the amplitude had a conspicuous positive effect on the reliability. Thus, NLSA with sinusoidal model resulted a reliable mathematical tool for data analysis of neural response activity under SRS in vestibular system and more suitable for those under the stimulation with low frequency but high amplitude, suggesting that this method can be used in nonlinear response range. This method broke out of the restriction of neural activity analysis under nonlinear response range and provided a solid foundation for future study in nonlinear response range in vestibular system. PMID:29304173

Design Optimization Method for Composite Components Based on Moment Reliability-Sensitivity Criteria

NASA Astrophysics Data System (ADS)

Sun, Zhigang; Wang, Changxi; Niu, Xuming; Song, Yingdong

2017-08-01

In this paper, a Reliability-Sensitivity Based Design Optimization (RSBDO) methodology for the design of the ceramic matrix composites (CMCs) components has been proposed. A practical and efficient method for reliability analysis and sensitivity analysis of complex components with arbitrary distribution parameters are investigated by using the perturbation method, the respond surface method, the Edgeworth series and the sensitivity analysis approach. The RSBDO methodology is then established by incorporating sensitivity calculation model into RBDO methodology. Finally, the proposed RSBDO methodology is applied to the design of the CMCs components. By comparing with Monte Carlo simulation, the numerical results demonstrate that the proposed methodology provides an accurate, convergent and computationally efficient method for reliability-analysis based finite element modeling engineering practice.

Reliability and sensitivity analysis of a system with multiple unreliable service stations and standby switching failures

NASA Astrophysics Data System (ADS)

Ke, Jyh-Bin; Lee, Wen-Chiung; Wang, Kuo-Hsiung

2007-07-01

This paper presents the reliability and sensitivity analysis of a system with M primary units, W warm standby units, and R unreliable service stations where warm standby units switching to the primary state might fail. Failure times of primary and warm standby units are assumed to have exponential distributions, and service times of the failed units are exponentially distributed. In addition, breakdown times and repair times of the service stations also follow exponential distributions. Expressions for system reliability, RY(t), and mean time to system failure, MTTF are derived. Sensitivity analysis, relative sensitivity analysis of the system reliability and the mean time to failure, with respect to system parameters are also investigated.

A study of fault prediction and reliability assessment in the SEL environment

NASA Technical Reports Server (NTRS)

Basili, Victor R.; Patnaik, Debabrata

1986-01-01

An empirical study on estimation and prediction of faults, prediction of fault detection and correction effort, and reliability assessment in the Software Engineering Laboratory environment (SEL) is presented. Fault estimation using empirical relationships and fault prediction using curve fitting method are investigated. Relationships between debugging efforts (fault detection and correction effort) in different test phases are provided, in order to make an early estimate of future debugging effort. This study concludes with the fault analysis, application of a reliability model, and analysis of a normalized metric for reliability assessment and reliability monitoring during development of software.

Mathematical modeling and fuzzy availability analysis for serial processes in the crystallization system of a sugar plant

NASA Astrophysics Data System (ADS)

Aggarwal, Anil Kr.; Kumar, Sanjeev; Singh, Vikram

2017-03-01

The binary states, i.e., success or failed state assumptions used in conventional reliability are inappropriate for reliability analysis of complex industrial systems due to lack of sufficient probabilistic information. For large complex systems, the uncertainty of each individual parameter enhances the uncertainty of the system reliability. In this paper, the concept of fuzzy reliability has been used for reliability analysis of the system, and the effect of coverage factor, failure and repair rates of subsystems on fuzzy availability for fault-tolerant crystallization system of sugar plant is analyzed. Mathematical modeling of the system is carried out using the mnemonic rule to derive Chapman-Kolmogorov differential equations. These governing differential equations are solved with Runge-Kutta fourth-order method.

Self-esteem among nursing assistants: reliability and validity of the Rosenberg Self-Esteem Scale.

PubMed

McMullen, Tara; Resnick, Barbara

2013-01-01

To establish the reliability and validity of the Rosenberg Self-Esteem Scale (RSES) when used with nursing assistants (NAs). Testing the RSES used baseline data from a randomized controlled trial testing the Res-Care Intervention. Female NAs were recruited from nursing homes (n = 508). Validity testing for the positive and negative subscales of the RSES was based on confirmatory factor analysis (CFA) using structural equation modeling and Rasch analysis. Estimates of reliability were based on Rasch analysis and the person separation index. Evidence supports the reliability and validity of the RSES in NAs although we recommend minor revisions to the measure for subsequent use. Establishing reliable and valid measures of self-esteem in NAs will facilitate testing of interventions to strengthen workplace self-esteem, job satisfaction, and retention.

A diameter-sensitive flow entropy method for reliability consideration in water distribution system design

NASA Astrophysics Data System (ADS)

Liu, Haixing; Savić, Dragan; Kapelan, Zoran; Zhao, Ming; Yuan, Yixing; Zhao, Hongbin

2014-07-01

Flow entropy is a measure of uniformity of pipe flows in water distribution systems. By maximizing flow entropy one can identify reliable layouts or connectivity in networks. In order to overcome the disadvantage of the common definition of flow entropy that does not consider the impact of pipe diameter on reliability, an extended definition of flow entropy, termed as diameter-sensitive flow entropy, is proposed. This new methodology is then assessed by using other reliability methods, including Monte Carlo Simulation, a pipe failure probability model, and a surrogate measure (resilience index) integrated with water demand and pipe failure uncertainty. The reliability assessment is based on a sample of WDS designs derived from an optimization process for each of the two benchmark networks. Correlation analysis is used to evaluate quantitatively the relationship between entropy and reliability. To ensure reliability, a comparative analysis between the flow entropy and the new method is conducted. The results demonstrate that the diameter-sensitive flow entropy shows consistently much stronger correlation with the three reliability measures than simple flow entropy. Therefore, the new flow entropy method can be taken as a better surrogate measure for reliability and could be potentially integrated into the optimal design problem of WDSs. Sensitivity analysis results show that the velocity parameters used in the new flow entropy has no significant impact on the relationship between diameter-sensitive flow entropy and reliability.

Reliability of muscle strength assessment in chronic post-stroke hemiparesis: a systematic review and meta-analysis.

PubMed

Rabelo, Michelle; Nunes, Guilherme S; da Costa Amante, Natália Menezes; de Noronha, Marcos; Fachin-Martins, Emerson

2016-02-01

Muscle weakness is the main cause of motor impairment among stroke survivors and is associated with reduced peak muscle torque. To systematically investigate and organize the evidence of the reliability of muscle strength evaluation measures in post-stroke survivors with chronic hemiparesis. Two assessors independently searched four electronic databases in January 2014 (Medline, Scielo, CINAHL, Embase). Inclusion criteria comprised studies on reliability on muscle strength assessment in adult post-stroke patients with chronic hemiparesis. We extracted outcomes from included studies about reliability data, measured by intraclass correlation coefficient (ICC) and/or similar. The meta-analyses were conducted only with isokinetic data. Of 450 articles, eight articles were included for this review. After quality analysis, two studies were considered of high quality. Five different joints were analyzed within the included studies (knee, hip, ankle, shoulder, and elbow). Their reliability results varying from low to very high reliability (ICCs from 0.48 to 0.99). Results of meta-analysis for knee extension varying from high to very high reliability (pooled ICCs from 0.89 to 0.97), for knee flexion varying from high to very high reliability (pooled ICCs from 0.84 to 0.91) and for ankle plantar flexion showed high reliability (pooled ICC = 0.85). Objective muscle strength assessment can be reliably used in lower and upper extremities in post-stroke patients with chronic hemiparesis.

Comprehensive Deployment Method for Technical Characteristics Base on Multi-failure Modes Correlation Analysis

NASA Astrophysics Data System (ADS)

Zheng, W.; Gao, J. M.; Wang, R. X.; Chen, K.; Jiang, Y.

2017-12-01

This paper put forward a new method of technical characteristics deployment based on Reliability Function Deployment (RFD) by analysing the advantages and shortages of related research works on mechanical reliability design. The matrix decomposition structure of RFD was used to describe the correlative relation between failure mechanisms, soft failures and hard failures. By considering the correlation of multiple failure modes, the reliability loss of one failure mode to the whole part was defined, and a calculation and analysis model for reliability loss was presented. According to the reliability loss, the reliability index value of the whole part was allocated to each failure mode. On the basis of the deployment of reliability index value, the inverse reliability method was employed to acquire the values of technology characteristics. The feasibility and validity of proposed method were illustrated by a development case of machining centre’s transmission system.

An Evidential Reasoning-Based CREAM to Human Reliability Analysis in Maritime Accident Process.

PubMed

Wu, Bing; Yan, Xinping; Wang, Yang; Soares, C Guedes

2017-10-01

This article proposes a modified cognitive reliability and error analysis method (CREAM) for estimating the human error probability in the maritime accident process on the basis of an evidential reasoning approach. This modified CREAM is developed to precisely quantify the linguistic variables of the common performance conditions and to overcome the problem of ignoring the uncertainty caused by incomplete information in the existing CREAM models. Moreover, this article views maritime accident development from the sequential perspective, where a scenario- and barrier-based framework is proposed to describe the maritime accident process. This evidential reasoning-based CREAM approach together with the proposed accident development framework are applied to human reliability analysis of a ship capsizing accident. It will facilitate subjective human reliability analysis in different engineering systems where uncertainty exists in practice. © 2017 Society for Risk Analysis.

Design of fuel cell powered data centers for sufficient reliability and availability

NASA Astrophysics Data System (ADS)

Ritchie, Alexa J.; Brouwer, Jacob

2018-04-01

It is challenging to design a sufficiently reliable fuel cell electrical system for use in data centers, which require 99.9999% uptime. Such a system could lower emissions and increase data center efficiency, but the reliability and availability of such a system must be analyzed and understood. Currently, extensive backup equipment is used to ensure electricity availability. The proposed design alternative uses multiple fuel cell systems each supporting a small number of servers to eliminate backup power equipment provided the fuel cell design has sufficient reliability and availability. Potential system designs are explored for the entire data center and for individual fuel cells. Reliability block diagram analysis of the fuel cell systems was accomplished to understand the reliability of the systems without repair or redundant technologies. From this analysis, it was apparent that redundant components would be necessary. A program was written in MATLAB to show that the desired system reliability could be achieved by a combination of parallel components, regardless of the number of additional components needed. Having shown that the desired reliability was achievable through some combination of components, a dynamic programming analysis was undertaken to assess the ideal allocation of parallel components.

Reliability Evaluation of Machine Center Components Based on Cascading Failure Analysis

NASA Astrophysics Data System (ADS)

Zhang, Ying-Zhi; Liu, Jin-Tong; Shen, Gui-Xiang; Long, Zhe; Sun, Shu-Guang

2017-07-01

In order to rectify the problems that the component reliability model exhibits deviation, and the evaluation result is low due to the overlook of failure propagation in traditional reliability evaluation of machine center components, a new reliability evaluation method based on cascading failure analysis and the failure influenced degree assessment is proposed. A direct graph model of cascading failure among components is established according to cascading failure mechanism analysis and graph theory. The failure influenced degrees of the system components are assessed by the adjacency matrix and its transposition, combined with the Pagerank algorithm. Based on the comprehensive failure probability function and total probability formula, the inherent failure probability function is determined to realize the reliability evaluation of the system components. Finally, the method is applied to a machine center, it shows the following: 1) The reliability evaluation values of the proposed method are at least 2.5% higher than those of the traditional method; 2) The difference between the comprehensive and inherent reliability of the system component presents a positive correlation with the failure influenced degree of the system component, which provides a theoretical basis for reliability allocation of machine center system.

Reliability/safety analysis of a fly-by-wire system

NASA Technical Reports Server (NTRS)

Brock, L. D.; Goddman, H. A.

1980-01-01

An analysis technique has been developed to estimate the reliability of a very complex, safety-critical system by constructing a diagram of the reliability equations for the total system. This diagram has many of the characteristics of a fault-tree or success-path diagram, but is much easier to construct for complex redundant systems. The diagram provides insight into system failure characteristics and identifies the most likely failure modes. A computer program aids in the construction of the diagram and the computation of reliability. Analysis of the NASA F-8 Digital Fly-by-Wire Flight Control System is used to illustrate the technique.

Key Reliability Drivers of Liquid Propulsion Engines and A Reliability Model for Sensitivity Analysis

NASA Technical Reports Server (NTRS)

Huang, Zhao-Feng; Fint, Jeffry A.; Kuck, Frederick M.

2005-01-01

This paper is to address the in-flight reliability of a liquid propulsion engine system for a launch vehicle. We first establish a comprehensive list of system and sub-system reliability drivers for any liquid propulsion engine system. We then build a reliability model to parametrically analyze the impact of some reliability parameters. We present sensitivity analysis results for a selected subset of the key reliability drivers using the model. Reliability drivers identified include: number of engines for the liquid propulsion stage, single engine total reliability, engine operation duration, engine thrust size, reusability, engine de-rating or up-rating, engine-out design (including engine-out switching reliability, catastrophic fraction, preventable failure fraction, unnecessary shutdown fraction), propellant specific hazards, engine start and cutoff transient hazards, engine combustion cycles, vehicle and engine interface and interaction hazards, engine health management system, engine modification, engine ground start hold down with launch commit criteria, engine altitude start (1 in. start), Multiple altitude restart (less than 1 restart), component, subsystem and system design, manufacturing/ground operation support/pre and post flight check outs and inspection, extensiveness of the development program. We present some sensitivity analysis results for the following subset of the drivers: number of engines for the propulsion stage, single engine total reliability, engine operation duration, engine de-rating or up-rating requirements, engine-out design, catastrophic fraction, preventable failure fraction, unnecessary shutdown fraction, and engine health management system implementation (basic redlines and more advanced health management systems).

Reliability culture at La Silla Paranal Observatory

NASA Astrophysics Data System (ADS)

Gonzalez, Sergio

2010-07-01

The Maintenance Department at the La Silla - Paranal Observatory has been an important base to keep the operations of the observatory at a good level of reliability and availability. Several strategies have been implemented and improved in order to cover these requirements and keep the system and equipment working properly when it is required. For that reason, one of the latest improvements has been the introduction of the concept of reliability, which implies that we don't simply speak about reliability concepts. It involves much more than that. It involves the use of technologies, data collecting, data analysis, decision making, committees concentrated in analysis of failure modes and how they can be eliminated, aligning the results with the requirements of our internal partners and establishing steps to achieve success. Some of these steps have already been implemented: data collection, use of technologies, analysis of data, development of priority tools, committees dedicated to analyze data and people dedicated to reliability analysis. This has permitted us to optimize our process, analyze where we can improve, avoid functional failures, reduce the failures range in several systems and subsystems; all this has had a positive impact in terms of results for our Observatory. All these tools are part of the reliability culture that allows our system to operate with a high level of reliability and availability.

Scale for positive aspects of caregiving experience: development, reliability, and factor structure.

PubMed

Kate, N; Grover, S; Kulhara, P; Nehra, R

2012-06-01

OBJECTIVE. To develop an instrument (Scale for Positive Aspects of Caregiving Experience [SPACE]) that evaluates positive caregiving experience and assess its psychometric properties. METHODS. Available scales which assess some aspects of positive caregiving experience were reviewed and a 50-item questionnaire with a 5-point rating was constructed. In all, 203 primary caregivers of patients with severe mental disorders were asked to complete the questionnaire. Internal consistency, test-retest reliability, cross-language reliability, split-half reliability, and face validity were evaluated. Principal component factor analysis was run to assess the factorial validity of the scale. RESULTS. The scale developed as part of the study was found to have good internal consistency, test-retest reliability, cross-language reliability, split-half reliability, and face validity. Principal component factor analysis yielded a 4-factor structure, which also had good test-retest reliability and cross-language reliability. There was a strong correlation between the 4 factors obtained. CONCLUSION. The SPACE developed as part of this study has good psychometric properties.

Reliability Analysis of the MSC System

NASA Astrophysics Data System (ADS)

Kim, Young-Soo; Lee, Do-Kyoung; Lee, Chang-Ho; Woo, Sun-Hee

2003-09-01

MSC (Multi-Spectral Camera) is the payload of KOMPSAT-2, which is being developed for earth imaging in optical and near-infrared region. The design of the MSC is completed and its reliability has been assessed from part level to the MSC system level. The reliability was analyzed in worst case and the analysis results showed that the value complies the required value of 0.9. In this paper, a calculation method of reliability for the MSC system is described, and assessment result is presented and discussed.

Parts and Components Reliability Assessment: A Cost Effective Approach

NASA Technical Reports Server (NTRS)

Lee, Lydia

2009-01-01

System reliability assessment is a methodology which incorporates reliability analyses performed at parts and components level such as Reliability Prediction, Failure Modes and Effects Analysis (FMEA) and Fault Tree Analysis (FTA) to assess risks, perform design tradeoffs, and therefore, to ensure effective productivity and/or mission success. The system reliability is used to optimize the product design to accommodate today?s mandated budget, manpower, and schedule constraints. Stand ard based reliability assessment is an effective approach consisting of reliability predictions together with other reliability analyses for electronic, electrical, and electro-mechanical (EEE) complex parts and components of large systems based on failure rate estimates published by the United States (U.S.) military or commercial standards and handbooks. Many of these standards are globally accepted and recognized. The reliability assessment is especially useful during the initial stages when the system design is still in the development and hard failure data is not yet available or manufacturers are not contractually obliged by their customers to publish the reliability estimates/predictions for their parts and components. This paper presents a methodology to assess system reliability using parts and components reliability estimates to ensure effective productivity and/or mission success in an efficient manner, low cost, and tight schedule.

The Validity and Reliability of the Mobbing Scale (MS)

ERIC Educational Resources Information Center

Yaman, Erkan

2009-01-01

The aim of this research is to develop the Mobbing Scale and examine its validity and reliability. The sample of the study consisted of 515 persons from Sakarya and Bursa. In this study, construct validity, internal consistency, test-retest reliability, and item analysis of the scale were examined. As a result of factor analysis for construct…

Convergence among Data Sources, Response Bias, and Reliability and Validity of a Structured Job Analysis Questionnaire.

ERIC Educational Resources Information Center

Smith, Jack E.; Hakel, Milton D.

1979-01-01

Examined are questions pertinent to the use of the Position Analysis Questionnaire: Who can use the PAQ reliably and validly? Must one rely on trained job analysts? Can people having no direct contact with the job use the PAQ reliably and validly? Do response biases influence PAQ responses? (Author/KC)

An Exploratory Factor Analysis and Reliability Analysis of the Student Online Learning Readiness (SOLR) Instrument

ERIC Educational Resources Information Center

Yu, Taeho; Richardson, Jennifer C.

2015-01-01

The purpose of this study was to develop an effective instrument to measure student readiness in online learning with reliable predictors of online learning success factors such as learning outcomes and learner satisfaction. The validity and reliability of the Student Online Learning Readiness (SOLR) instrument were tested using exploratory factor…

Transit Reliability Information Program : PATCO-WMATA Propulsion System Reliability/Productivity Analysis

DOT National Transportation Integrated Search

1984-10-01

The Transit Reliability Information Program (TRIP) is a government-initiated program to assist the transit industry in satisfying its need for transit reliability information. TRIP provides this assistance through the operation of a national data ban...

Method of Testing and Predicting Failures of Electronic Mechanical Systems

NASA Technical Reports Server (NTRS)

Iverson, David L.; Patterson-Hine, Frances A.

1996-01-01

A method employing a knowledge base of human expertise comprising a reliability model analysis implemented for diagnostic routines is disclosed. The reliability analysis comprises digraph models that determine target events created by hardware failures human actions, and other factors affecting the system operation. The reliability analysis contains a wealth of human expertise information that is used to build automatic diagnostic routines and which provides a knowledge base that can be used to solve other artificial intelligence problems.

Reliability of fully automated versus visually controlled pre- and post-processing of resting-state EEG.

PubMed

Hatz, F; Hardmeier, M; Bousleiman, H; Rüegg, S; Schindler, C; Fuhr, P

2015-02-01

To compare the reliability of a newly developed Matlab® toolbox for the fully automated, pre- and post-processing of resting state EEG (automated analysis, AA) with the reliability of analysis involving visually controlled pre- and post-processing (VA). 34 healthy volunteers (age: median 38.2 (20-49), 82% female) had three consecutive 256-channel resting-state EEG at one year intervals. Results of frequency analysis of AA and VA were compared with Pearson correlation coefficients, and reliability over time was assessed with intraclass correlation coefficients (ICC). Mean correlation coefficient between AA and VA was 0.94±0.07, mean ICC for AA 0.83±0.05 and for VA 0.84±0.07. AA and VA yield very similar results for spectral EEG analysis and are equally reliable. AA is less time-consuming, completely standardized, and independent of raters and their training. Automated processing of EEG facilitates workflow in quantitative EEG analysis. Copyright © 2014 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

The development of a reliable amateur boxing performance analysis template.

PubMed

Thomson, Edward; Lamb, Kevin; Nicholas, Ceri

2013-01-01

The aim of this study was to devise a valid performance analysis system for the assessment of the movement characteristics associated with competitive amateur boxing and assess its reliability using analysts of varying experience of the sport and performance analysis. Key performance indicators to characterise the demands of an amateur contest (offensive, defensive and feinting) were developed and notated using a computerised notational analysis system. Data were subjected to intra- and inter-observer reliability assessment using median sign tests and calculating the proportion of agreement within predetermined limits of error. For all performance indicators, intra-observer reliability revealed non-significant differences between observations (P > 0.05) and high agreement was established (80-100%) regardless of whether exact or the reference value of ±1 was applied. Inter-observer reliability was less impressive for both analysts (amateur boxer and experienced analyst), with the proportion of agreement ranging from 33-100%. Nonetheless, there was no systematic bias between observations for any indicator (P > 0.05), and the proportion of agreement within the reference range (±1) was 100%. A reliable performance analysis template has been developed for the assessment of amateur boxing performance and is available for use by researchers, coaches and athletes to classify and quantify the movement characteristics of amateur boxing.

Reliability on intra-laboratory and inter-laboratory data of hair mineral analysis comparing with blood analysis.

PubMed

Namkoong, Sun; Hong, Seung Phil; Kim, Myung Hwa; Park, Byung Cheol

2013-02-01

Nowadays, although its clinical value remains controversial institutions utilize hair mineral analysis. Arguments about the reliability of hair mineral analysis persist, and there have been evaluations of commercial laboratories performing hair mineral analysis. The objective of this study was to assess the reliability of intra-laboratory and inter-laboratory data at three commercial laboratories conducting hair mineral analysis, compared to serum mineral analysis. Two divided hair samples taken from near the scalp were submitted for analysis at the same time, to all laboratories, from one healthy volunteer. Each laboratory sent a report consisting of quantitative results and their interpretation of health implications. Differences among intra-laboratory and interlaboratory data were analyzed using SPSS version 12.0 (SPSS Inc., USA). All the laboratories used identical methods for quantitative analysis, and they generated consistent numerical results according to Friedman analysis of variance. However, the normal reference ranges of each laboratory varied. As such, each laboratory interpreted the patient's health differently. On intra-laboratory data, Wilcoxon analysis suggested they generated relatively coherent data, but laboratory B could not in one element, so its reliability was doubtful. In comparison with the blood test, laboratory C generated identical results, but not laboratory A and B. Hair mineral analysis has its limitations, considering the reliability of inter and intra laboratory analysis comparing with blood analysis. As such, clinicians should be cautious when applying hair mineral analysis as an ancillary tool. Each laboratory included in this study requires continuous refinement from now on for inducing standardized normal reference levels.

Comparison of Reliability Measures under Factor Analysis and Item Response Theory

ERIC Educational Resources Information Center

Cheng, Ying; Yuan, Ke-Hai; Liu, Cheng

2012-01-01

Reliability of test scores is one of the most pervasive psychometric concepts in measurement. Reliability coefficients based on a unifactor model for continuous indicators include maximal reliability rho and an unweighted sum score-based omega, among many others. With increasing popularity of item response theory, a parallel reliability measure pi…

A Comparison of Three Methods for the Analysis of Skin Flap Viability: Reliability and Validity.

PubMed

Tim, Carla Roberta; Martignago, Cintia Cristina Santi; da Silva, Viviane Ribeiro; Dos Santos, Estefany Camila Bonfim; Vieira, Fabiana Nascimento; Parizotto, Nivaldo Antonio; Liebano, Richard Eloin

2018-05-01

Objective: Technological advances have provided new alternatives to the analysis of skin flap viability in animal models; however, the interrater validity and reliability of these techniques have yet to be analyzed. The present study aimed to evaluate the interrater validity and reliability of three different methods: weight of paper template (WPT), paper template area (PTA), and photographic analysis. Approach: Sixteen male Wistar rats had their cranially based dorsal skin flap elevated. On the seventh postoperative day, the viable tissue area and the necrotic area of the skin flap were recorded using the paper template method and photo image. The evaluation of the percentage of viable tissue was performed using three methods, simultaneously and independently by two raters. The analysis of interrater reliability and viability was performed using the intraclass correlation coefficient and Bland Altman Plot Analysis was used to visualize the presence or absence of systematic bias in the evaluations of data validity. Results: The results showed that interrater reliability for WPT, measurement of PTA, and photographic analysis were 0.995, 0.990, and 0.982, respectively. For data validity, a correlation >0.90 was observed for all comparisons made between the three methods. In addition, Bland Altman Plot Analysis showed agreement between the comparisons of the methods and the presence of systematic bias was not observed. Innovation: Digital methods are an excellent choice for assessing skin flap viability; moreover, they make data use and storage easier. Conclusion: Independently from the method used, the interrater reliability and validity proved to be excellent for the analysis of skin flaps' viability.

Validity and reliability of Chinese version of Adult Carer Quality of Life questionnaire (AC-QoL) in family caregivers of stroke survivors

PubMed Central

Li, Yingshuang; Ding, Chunge

2017-01-01

The Adult Carer Quality of Life questionnaire (AC-QoL) is a reliable and valid instrument used to assess the quality of life (QoL) of adult family caregivers. We explored the psychometric properties and tested the reliability and validity of a Chinese version of the AC-QoL with reliability and validity testing in 409 Chinese stroke caregivers. We used item-total correlation and extreme group comparison to do item analysis. To evaluate its reliability, we used a test-retest reliability approach, intraclass correlation coefficient (ICC), together with Cronbach’s alpha and model-based internal consistency index; to evaluate its validity, we used scale content validity, confirmatory factor analysis (CFA) and exploratory factor analysis (EFA) via principal component analysis with varimax rotation. We found that the CFA did not in fact confirm the original factor model and our EFA yielded a 31-item measure with a five-factor model. In conclusions, although some items performed differently in our analysis of the original English language version and our Chinese language version, our translated AC-QoL is a reliable and valid tool which can be used to assess the quality of life of stroke caregivers in mainland China. Chinese version AC-QoL is a comprehensive and good measurement to understand caregivers and has the potential to be a screening tool to assess QoL of caregiver. PMID:29131845

Structural reliability assessment of the Oman India Pipeline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Al-Sharif, A.M.; Preston, R.

1996-12-31

Reliability techniques are increasingly finding application in design. The special design conditions for the deep water sections of the Oman India Pipeline dictate their use since the experience basis for application of standard deterministic techniques is inadequate. The paper discusses the reliability analysis as applied to the Oman India Pipeline, including selection of a collapse model, characterization of the variability in the parameters that affect pipe resistance to collapse, and implementation of first and second order reliability analyses to assess the probability of pipe failure. The reliability analysis results are used as the basis for establishing the pipe wall thicknessmore » requirements for the pipeline.« less

A universal formula for the field enhancement factor

NASA Astrophysics Data System (ADS)

Biswas, Debabrata

2018-04-01

The field enhancement factor (FEF) is an important quantity in field emission calculations since the tunneling electron current depends very sensitively on its magnitude. The exact dependence of FEF on the emitter height h, the radius of curvature at the apex Ra, as well as the shape of the emitter base are still largely unknown. In this work, a universal formula for the field enhancement factor is derived for a single emitter. It depends on the ratio h/Ra and has the form γ a = ( 2 h / R a ) / [ α 1 ln ( 4 h / R a ) - α 2 ] , where α1 and α2 depend on the charge distribution on the emitter. Numerical results show that a simpler form γ a = ( 2 h / R a ) / [ ln ( 4 h / R a ) - α ] is equally valid with α depending on the emitter-base. Thus, for the hyperboloid, conical, and ellipsoid emitters, the value of α is 0, 0.88, and 2, while for the cylindrical base, α ≃ 2.6.

VizieR Online Data Catalog: 180MHz Murchison Commissioning Survey (MWACS) (Hurley-Walker+, 2014)

NASA Astrophysics Data System (ADS)

Hurley-Walker, N.; Morgan, J.; Wayth, R. B.; Hancock, P. J.; Bell, M. E.; Bernardi, G.; Bhat, N. D. R.; Briggs, F.; Deshpande, A. A.; Ewall-Wice, A.; Feng, L.; Hazelton, B. J.; Hindson, L.; Jacobs, D. C.; Kaplan, D. L.; Kudryavtseva, N.; Lenc, E.; McKinley, B.; Mitchell, D.; Pindor, B.; Procopio, P.; Oberoi, D.; Offringa, A.; Ord, S.; Riding, J.; Bowman, J. D.; Cappallo, R.; Corey, B.; Emrich, D.; Gaensler, B. M.; Goeke, R.; Greenhill, L.; Hewitt, J.; Johnston-Hollitt, M.; Kasper, J.; Kratzenberg, E.; Lonsdale, C.; Lynch, M.; McWhirter, R.; Morales, M. F.; Morgan, E.; Prabu, T.; Rogers, A.; Roshi, A.; Shankar, U.; Srivani, K.; Subrahmanyan, R.; Tingay, S.; Waterson, M.; Webster, R.; Whitney, A.; Williams, A.; Williams, C.

2014-10-01

The Murchison Widefield Array Commissioning Survey (MWACS) is a ~6100deg2 104-196MHz radio sky survey performed with the Murchison Widefield Array during instrument commissioning between 2012 September and 2012 December. The data were taken as meridian drift scans with two different 32-antenna sub-arrays that were available during the commissioning period. The data were combined in the visibility plane before being imaged, and then mosaicked. The survey covers approximately 20.5h

Optical Coherence Tomography Angiography of Pigmented Paravenous Retinochoroidal Atrophy.

PubMed

Cicinelli, Maria Vittoria; Giuffrè, Chiara; Rabiolo, Alessandro; Parodi, Maurizio Battaglia; Bandello, Francesco

2018-05-01

A 58-year-old man with bilateral pigmented paravenous retinochoroidal atrophy (PPRCA) associated with macular coloboma in the right eye underwent color fundus photography and fundus autofluorescence with the California ultra-widefield retinal imaging system (Optos, Dunfermline, UK), spectral-domain optical coherence tomography (SD-OCT) (Heidelberg Spectralis HRA + OCT; Heidelberg Engineering, Heidelberg, Germany), and en face OCT angiography (OCTA) (AngioPlex, Cirrus HD-OCT 5000; Carl Zeiss Meditec, Dublin, CA). The patient presented with a visual acuity of counting fingers in the right eye and 20/32 in the left eye. Fundus examination and SD-OCT showed typical PPRCA alterations in both eyes and a macular coloboma in the right eye. The OCTA showed relative sparing of the retinal capillary plexuses, with diffuse defects in the choriocapillaris. The authors concluded OCTA imaging of PPRCA suggests more insights of the pathogenesis of this disease, showing that the disease primarily affects the choroidal vascular network, with a relative sparing of the retinal vasculature. [Ophthalmic Surg Lasers Imaging Retina. 2018;49:381-383.]. Copyright 2018, SLACK Incorporated.

Critical thickness investigation of magnetic properties in exchange-coupled bilayers

NASA Astrophysics Data System (ADS)

Rodríguez-Suárez, R. L.; Vilela-Leão, L. H.; Bueno, T.; Oliveira, A. B.; de Almeida, J. R. L.; Landeros, P.; Rezende, S. M.; Azevedo, A.

2011-06-01

We present a systematic investigation of the magnetic properties of two series of polycrystalline ferromagnetic-antiferromagnetic bilayers (FM-AF) of Ni81Fe19(10nm)/Ir20Mn80(tAF) grown by dc magnetron sputtering. One series was grown at an oblique angle of 50° and the other one was grown at 0°. Ferromagnetic resonance (FMR) was used to measure the exchange bias field HE, the rotatable anisotropy field HRA, and the FMR linewidth ΔH as a function of the antiferromagnetic layer thickness tAF. Three relaxation channels due to isotropic Gilbert damping, anisotropic two-magnon scattering, and mosaicity effects are simultaneously distinguished through the angular dependence of the FMR linewidth. In the regime of small IrMn layer thicknesses, not enough to establish the exchange bias anisotropy, the FMR linewidth shows a sharp peak due to the contribution of the two-magnon scattering mechanism. The results presented here are of general importance for understanding the dynamics of magnetization in the FM-AF structures.

VizieR Online Data Catalog: South Galactic cap MCT blue objects (Lamontagne+, 2000)

NASA Astrophysics Data System (ADS)

Lamontagne, R.; Demers, S.; Wesemael, F.; Fontaine, G.; Irwin, M. J.

2016-07-01

A detailed description of the first part of our survey, namely, the photographic observations (including plate scanning, photometric calibrations, and candidate selection), has been presented by Demers et al. (1986AJ.....92..878D). Briefly summarized, the MCT survey consists of 430 doubly exposed U and B plates, taken with the Curtis Schmidt telescope at the Cerro Tololo Inter-American Observatory (CTIO) and covering 6750 deg2 (~15% of the whole sky) in a region defined by 19h<~RA<~7h and -90°<=DE<=0°. Our survey blankets most of the south Galactic cap of our Galaxy accessible from CTIO, up to b=-30°. The bulk of our spectroscopic material was gathered at CTIO with the 1.5m and 4m telescopes in the course of several observing runs since 1985. We have identified all 228 selected blue candidates [(U-B)pg<=-0.6] brighter than Bpg=16.5 in this region of the sky. (1 data file).

The ARIANNA Hexagonal Radio Array - performance and prospects

NASA Astrophysics Data System (ADS)

Hallgren, Allan

2016-04-01

The origin of the highest energy cosmic rays at ˜1020 eV is still unknown. Ultra-high energy neutrinos from the GZK process should provide information on the sources and their properties. A promising and cost effective method for observing GZK-neutrinos is based on detection of Askaryan radio pulses with antennas installed in ice. The ARIANNA project aims at instrumenting a 36*36 km2 large area on the Ross Ice Shelf with an array of radio detection stations. The deployment of a test system for ARIANNA, the Hexagonal Radio Array (HRA), was completed in December 2014. The three first stations were installed in 2012. Solar panels are used to drive the < 10 W stations. The system hibernated at sunset in April and all stations returned to operation in September. The site is essentially free of anthropogenic noise. Simple cuts eliminate background and provides for efficient selection of neutrino events. Prospects for the sensitivity of the full ARIANNA array to the flux of GZK neutrinos are shown.

Reliability of Long-Term Wave Conditions Predicted with Data Sets of Short Duration

DTIC Science & Technology

1985-03-01

the validity and reliability of predicted probable wave heights obtained from data of limited duration. BACKGROUND: The basic steps listed by...interest to perform the analysis outlined in steps 2 to 5, the prediction would only be reliable for up to a 3year return period. For a 5-year data set...for long-term hindcast data . The data retrieval and analysis program known as the Sea State Engineering Analysis System (SEAS) makes handling of the

Kuhn-Tucker optimization based reliability analysis for probabilistic finite elements

NASA Technical Reports Server (NTRS)

Liu, W. K.; Besterfield, G.; Lawrence, M.; Belytschko, T.

1988-01-01

The fusion of probability finite element method (PFEM) and reliability analysis for fracture mechanics is considered. Reliability analysis with specific application to fracture mechanics is presented, and computational procedures are discussed. Explicit expressions for the optimization procedure with regard to fracture mechanics are given. The results show the PFEM is a very powerful tool in determining the second-moment statistics. The method can determine the probability of failure or fracture subject to randomness in load, material properties and crack length, orientation, and location.

Software reliability: Application of a reliability model to requirements error analysis

NASA Technical Reports Server (NTRS)

Logan, J.

1980-01-01

The application of a software reliability model having a well defined correspondence of computer program properties to requirements error analysis is described. Requirements error categories which can be related to program structural elements are identified and their effect on program execution considered. The model is applied to a hypothetical B-5 requirement specification for a program module.

5 CFR 841.411 - Appeals procedure.

Code of Federal Regulations, 2011 CFR

2011-01-01

... agency's actuarial analysis are sufficient and reliable (As a general rule, at least 5 years of data... reliable.); (2) The assumptions used in the agency's actuarial analysis are justified; (3) When all...

Test-retest and between-site reliability in a multicenter fMRI study.

PubMed

Friedman, Lee; Stern, Hal; Brown, Gregory G; Mathalon, Daniel H; Turner, Jessica; Glover, Gary H; Gollub, Randy L; Lauriello, John; Lim, Kelvin O; Cannon, Tyrone; Greve, Douglas N; Bockholt, Henry Jeremy; Belger, Aysenil; Mueller, Bryon; Doty, Michael J; He, Jianchun; Wells, William; Smyth, Padhraic; Pieper, Steve; Kim, Seyoung; Kubicki, Marek; Vangel, Mark; Potkin, Steven G

2008-08-01

In the present report, estimates of test-retest and between-site reliability of fMRI assessments were produced in the context of a multicenter fMRI reliability study (FBIRN Phase 1, www.nbirn.net). Five subjects were scanned on 10 MRI scanners on two occasions. The fMRI task was a simple block design sensorimotor task. The impulse response functions to the stimulation block were derived using an FIR-deconvolution analysis with FMRISTAT. Six functionally-derived ROIs covering the visual, auditory and motor cortices, created from a prior analysis, were used. Two dependent variables were compared: percent signal change and contrast-to-noise-ratio. Reliability was assessed with intraclass correlation coefficients derived from a variance components analysis. Test-retest reliability was high, but initially, between-site reliability was low, indicating a strong contribution from site and site-by-subject variance. However, a number of factors that can markedly improve between-site reliability were uncovered, including increasing the size of the ROIs, adjusting for smoothness differences, and inclusion of additional runs. By employing multiple steps, between-site reliability for 3T scanners was increased by 123%. Dropping one site at a time and assessing reliability can be a useful method of assessing the sensitivity of the results to particular sites. These findings should provide guidance toothers on the best practices for future multicenter studies.

An overview of the mathematical and statistical analysis component of RICIS

NASA Technical Reports Server (NTRS)

Hallum, Cecil R.

1987-01-01

Mathematical and statistical analysis components of RICIS (Research Institute for Computing and Information Systems) can be used in the following problem areas: (1) quantification and measurement of software reliability; (2) assessment of changes in software reliability over time (reliability growth); (3) analysis of software-failure data; and (4) decision logic for whether to continue or stop testing software. Other areas of interest to NASA/JSC where mathematical and statistical analysis can be successfully employed include: math modeling of physical systems, simulation, statistical data reduction, evaluation methods, optimization, algorithm development, and mathematical methods in signal processing.

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 5. Technical Report #1204

ERIC Educational Resources Information Center

Park, Bitnara Jasmine; Irvin, P. Shawn; Lai, Cheng-Fei; Alonzo, Julie; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the fifth-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 2. Technical Report #1201

ERIC Educational Resources Information Center

Lai, Cheng-Fei; Irvin, P. Shawn; Alonzo, Julie; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the second-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 4. Technical Report #1203

ERIC Educational Resources Information Center

Park, Bitnara Jasmine; Irvin, P. Shawn; Alonzo, Julie; Lai, Cheng-Fei; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the fourth-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 6. Technical Report #1205

ERIC Educational Resources Information Center

Irvin, P. Shawn; Alonzo, Julie; Park, Bitnara Jasmine; Lai, Cheng-Fei; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the sixth-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 7. Technical Report #1206

ERIC Educational Resources Information Center

Irvin, P. Shawn; Alonzo, Julie; Lai, Cheng-Fei; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the seventh-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Analyzing the Reliability of the easyCBM Reading Comprehension Measures: Grade 3. Technical Report #1202

ERIC Educational Resources Information Center

Lai, Cheng-Fei; Irvin, P. Shawn; Park, Bitnara Jasmine; Alonzo, Julie; Tindal, Gerald

2012-01-01

In this technical report, we present the results of a reliability study of the third-grade multiple choice reading comprehension measures available on the easyCBM learning system conducted in the spring of 2011. Analyses include split-half reliability, alternate form reliability, person and item reliability as derived from Rasch analysis,…

Reliability studies of Integrated Modular Engine system designs

NASA Technical Reports Server (NTRS)

Hardy, Terry L.; Rapp, Douglas C.

1993-01-01

A study was performed to evaluate the reliability of Integrated Modular Engine (IME) concepts. Comparisons were made between networked IME systems and non-networked discrete systems using expander cycle configurations. Both redundant and non-redundant systems were analyzed. Binomial approximation and Markov analysis techniques were employed to evaluate total system reliability. In addition, Failure Modes and Effects Analyses (FMEA), Preliminary Hazard Analyses (PHA), and Fault Tree Analysis (FTA) were performed to allow detailed evaluation of the IME concept. A discussion of these system reliability concepts is also presented.

Reliability studies of integrated modular engine system designs

NASA Technical Reports Server (NTRS)

Hardy, Terry L.; Rapp, Douglas C.

1993-01-01

A study was performed to evaluate the reliability of Integrated Modular Engine (IME) concepts. Comparisons were made between networked IME systems and non-networked discrete systems using expander cycle configurations. Both redundant and non-redundant systems were analyzed. Binomial approximation and Markov analysis techniques were employed to evaluate total system reliability. In addition, Failure Modes and Effects Analyses (FMEA), Preliminary Hazard Analyses (PHA), and Fault Tree Analysis (FTA) were performed to allow detailed evaluation of the IME concept. A discussion of these system reliability concepts is also presented.

Analysis of whisker-toughened CMC structural components using an interactive reliability model

NASA Technical Reports Server (NTRS)

Duffy, Stephen F.; Palko, Joseph L.

1992-01-01

Realizing wider utilization of ceramic matrix composites (CMC) requires the development of advanced structural analysis technologies. This article focuses on the use of interactive reliability models to predict component probability of failure. The deterministic William-Warnke failure criterion serves as theoretical basis for the reliability model presented here. The model has been implemented into a test-bed software program. This computer program has been coupled to a general-purpose finite element program. A simple structural problem is presented to illustrate the reliability model and the computer algorithm.

Reliability analysis of laminated CMC components through shell subelement techniques

NASA Technical Reports Server (NTRS)

Starlinger, A.; Duffy, S. F.; Gyekenyesi, J. P.

1992-01-01

An updated version of the integrated design program C/CARES (composite ceramic analysis and reliability evaluation of structures) was developed for the reliability evaluation of CMC laminated shell components. The algorithm is now split in two modules: a finite-element data interface program and a reliability evaluation algorithm. More flexibility is achieved, allowing for easy implementation with various finite-element programs. The new interface program from the finite-element code MARC also includes the option of using hybrid laminates and allows for variations in temperature fields throughout the component.

Reliability studies of integrated modular engine system designs

NASA Astrophysics Data System (ADS)

Hardy, Terry L.; Rapp, Douglas C.

1993-06-01

A study was performed to evaluate the reliability of Integrated Modular Engine (IME) concepts. Comparisons were made between networked IME systems and non-networked discrete systems using expander cycle configurations. Both redundant and non-redundant systems were analyzed. Binomial approximation and Markov analysis techniques were employed to evaluate total system reliability. In addition, Failure Modes and Effects Analyses (FMEA), Preliminary Hazard Analyses (PHA), and Fault Tree Analysis (FTA) were performed to allow detailed evaluation of the IME concept. A discussion of these system reliability concepts is also presented.

Reliability studies of Integrated Modular Engine system designs

NASA Astrophysics Data System (ADS)

Hardy, Terry L.; Rapp, Douglas C.

1993-06-01

A study was performed to evaluate the reliability of Integrated Modular Engine (IME) concepts. Comparisons were made between networked IME systems and non-networked discrete systems using expander cycle configurations. Both redundant and non-redundant systems were analyzed. Binomial approximation and Markov analysis techniques were employed to evaluate total system reliability. In addition, Failure Modes and Effects Analyses (FMEA), Preliminary Hazard Analyses (PHA), and Fault Tree Analysis (FTA) were performed to allow detailed evaluation of the IME concept. A discussion of these system reliability concepts is also presented.

Calculating system reliability with SRFYDO

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morzinski, Jerome; Anderson - Cook, Christine M; Klamann, Richard M

2010-01-01

SRFYDO is a process for estimating reliability of complex systems. Using information from all applicable sources, including full-system (flight) data, component test data, and expert (engineering) judgment, SRFYDO produces reliability estimates and predictions. It is appropriate for series systems with possibly several versions of the system which share some common components. It models reliability as a function of age and up to 2 other lifecycle (usage) covariates. Initial output from its Exploratory Data Analysis mode consists of plots and numerical summaries so that the user can check data entry and model assumptions, and help determine a final form for themore » system model. The System Reliability mode runs a complete reliability calculation using Bayesian methodology. This mode produces results that estimate reliability at the component, sub-system, and system level. The results include estimates of uncertainty, and can predict reliability at some not-too-distant time in the future. This paper presents an overview of the underlying statistical model for the analysis, discusses model assumptions, and demonstrates usage of SRFYDO.« less

User-perceived reliability of unrepairable shared protection systems with functionally identical units

NASA Astrophysics Data System (ADS)

Ozaki, Hirokazu; Kara, Atsushi; Cheng, Zixue

2012-05-01

In this article, we investigate the reliability of M-for-N (M:N) shared protection systems. We focus on the reliability that is perceived by an end user of one of N units. We assume that any failed unit is instantly replaced by one of the M units (if available). We describe the effectiveness of such a protection system in a quantitative manner under the condition that the failed units are not repairable. Mathematical analysis gives the closed-form solution of the reliability and mean time to failure (MTTF). We also analyse several numerical examples of the reliability and MTTF. This result can be applied, for example, to the analysis and design of an integrated circuit consisting of redundant backup components. In such a device, repairing a failed component is unrealistic. The analysis provides useful information for the design for general shared protection systems in which the failed units are not repaired.

Reliability and concurrent validity of a Smartphone, bubble inclinometer and motion analysis system for measurement of hip joint range of motion.

PubMed

Charlton, Paula C; Mentiplay, Benjamin F; Pua, Yong-Hao; Clark, Ross A

2015-05-01

Traditional methods of assessing joint range of motion (ROM) involve specialized tools that may not be widely available to clinicians. This study assesses the reliability and validity of a custom Smartphone application for assessing hip joint range of motion. Intra-tester reliability with concurrent validity. Passive hip joint range of motion was recorded for seven different movements in 20 males on two separate occasions. Data from a Smartphone, bubble inclinometer and a three dimensional motion analysis (3DMA) system were collected simultaneously. Intraclass correlation coefficients (ICCs), coefficients of variation (CV) and standard error of measurement (SEM) were used to assess reliability. To assess validity of the Smartphone application and the bubble inclinometer against the three dimensional motion analysis system, intraclass correlation coefficients and fixed and proportional biases were used. The Smartphone demonstrated good to excellent reliability (ICCs>0.75) for four out of the seven movements, and moderate to good reliability for the remaining three movements (ICC=0.63-0.68). Additionally, the Smartphone application displayed comparable reliability to the bubble inclinometer. The Smartphone application displayed excellent validity when compared to the three dimensional motion analysis system for all movements (ICCs>0.88) except one, which displayed moderate to good validity (ICC=0.71). Smartphones are portable and widely available tools that are mostly reliable and valid for assessing passive hip range of motion, with potential for large-scale use when a bubble inclinometer is not available. However, caution must be taken in its implementation as some movement axes demonstrated only moderate reliability. Copyright © 2014 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Developing safety performance functions incorporating reliability-based risk measures.

PubMed

Ibrahim, Shewkar El-Bassiouni; Sayed, Tarek

2011-11-01

Current geometric design guides provide deterministic standards where the safety margin of the design output is generally unknown and there is little knowledge of the safety implications of deviating from these standards. Several studies have advocated probabilistic geometric design where reliability analysis can be used to account for the uncertainty in the design parameters and to provide a risk measure of the implication of deviation from design standards. However, there is currently no link between measures of design reliability and the quantification of safety using collision frequency. The analysis presented in this paper attempts to bridge this gap by incorporating a reliability-based quantitative risk measure such as the probability of non-compliance (P(nc)) in safety performance functions (SPFs). Establishing this link will allow admitting reliability-based design into traditional benefit-cost analysis and should lead to a wider application of the reliability technique in road design. The present application is concerned with the design of horizontal curves, where the limit state function is defined in terms of the available (supply) and stopping (demand) sight distances. A comprehensive collision and geometric design database of two-lane rural highways is used to investigate the effect of the probability of non-compliance on safety. The reliability analysis was carried out using the First Order Reliability Method (FORM). Two Negative Binomial (NB) SPFs were developed to compare models with and without the reliability-based risk measures. It was found that models incorporating the P(nc) provided a better fit to the data set than the traditional (without risk) NB SPFs for total, injury and fatality (I+F) and property damage only (PDO) collisions. Copyright © 2011 Elsevier Ltd. All rights reserved.

Reliability analysis of component-level redundant topologies for solid-state fault current limiter

NASA Astrophysics Data System (ADS)

Farhadi, Masoud; Abapour, Mehdi; Mohammadi-Ivatloo, Behnam

2018-04-01

Experience shows that semiconductor switches in power electronics systems are the most vulnerable components. One of the most common ways to solve this reliability challenge is component-level redundant design. There are four possible configurations for the redundant design in component level. This article presents a comparative reliability analysis between different component-level redundant designs for solid-state fault current limiter. The aim of the proposed analysis is to determine the more reliable component-level redundant configuration. The mean time to failure (MTTF) is used as the reliability parameter. Considering both fault types (open circuit and short circuit), the MTTFs of different configurations are calculated. It is demonstrated that more reliable configuration depends on the junction temperature of the semiconductor switches in the steady state. That junction temperature is a function of (i) ambient temperature, (ii) power loss of the semiconductor switch and (iii) thermal resistance of heat sink. Also, results' sensitivity to each parameter is investigated. The results show that in different conditions, various configurations have higher reliability. The experimental results are presented to clarify the theory and feasibility of the proposed approaches. At last, levelised costs of different configurations are analysed for a fair comparison.

Reliability evaluation methodology for NASA applications

NASA Technical Reports Server (NTRS)

Taneja, Vidya S.

1992-01-01

Liquid rocket engine technology has been characterized by the development of complex systems containing large number of subsystems, components, and parts. The trend to even larger and more complex system is continuing. The liquid rocket engineers have been focusing mainly on performance driven designs to increase payload delivery of a launch vehicle for a given mission. In otherwords, although the failure of a single inexpensive part or component may cause the failure of the system, reliability in general has not been considered as one of the system parameters like cost or performance. Up till now, quantification of reliability has not been a consideration during system design and development in the liquid rocket industry. Engineers and managers have long been aware of the fact that the reliability of the system increases during development, but no serious attempts have been made to quantify reliability. As a result, a method to quantify reliability during design and development is needed. This includes application of probabilistic models which utilize both engineering analysis and test data. Classical methods require the use of operating data for reliability demonstration. In contrast, the method described in this paper is based on similarity, analysis, and testing combined with Bayesian statistical analysis.

ERP Reliability Analysis (ERA) Toolbox: An open-source toolbox for analyzing the reliability of event-related brain potentials.

PubMed

Clayson, Peter E; Miller, Gregory A

2017-01-01

Generalizability theory (G theory) provides a flexible, multifaceted approach to estimating score reliability. G theory's approach to estimating score reliability has important advantages over classical test theory that are relevant for research using event-related brain potentials (ERPs). For example, G theory does not require parallel forms (i.e., equal means, variances, and covariances), can handle unbalanced designs, and provides a single reliability estimate for designs with multiple sources of error. This monograph provides a detailed description of the conceptual framework of G theory using examples relevant to ERP researchers, presents the algorithms needed to estimate ERP score reliability, and provides a detailed walkthrough of newly-developed software, the ERP Reliability Analysis (ERA) Toolbox, that calculates score reliability using G theory. The ERA Toolbox is open-source, Matlab software that uses G theory to estimate the contribution of the number of trials retained for averaging, group, and/or event types on ERP score reliability. The toolbox facilitates the rigorous evaluation of psychometric properties of ERP scores recommended elsewhere in this special issue. Copyright © 2016 Elsevier B.V. All rights reserved.

Getting the story straight: evaluating the test-retest reliability of a university health history questionnaire.

PubMed

Gilkison, C R; Fenton, M V; Lester, J W

1992-05-01

This study was designed to establish the reliability of a health history questionnaire used as a screening tool for incoming university students. The authors used a test-retest design, with a test interval of 6 months, on a sample of medical and nursing students. The analysis focused on overall reliability of the questionnaire and reproducibility of specific items, based on question format. Questionnaire items of specific interest were those with dichotomous yes/no response options versus open-ended format questions, those using the words frequently or recently, or those that asked multiple questions. Demographic characteristics of the subjects were considered in the evaluation of reliability. Overall reliability of the questionnaire (93.6%) was above the anticipated level of 90%, and subject sex or program of study did not show any significant differences in reproducibility of responses. Although wording of questions did not affect item reliability, dichotomous format questions demonstrated a higher degree of reliability (96.4%) than the overall reliability of the questionnaire. Recommendations for enhancing the reliability of the questionnaire are based on item analysis and information gathered from interviews with subjects.

Storage reliability analysis summary report. Volume 2: Electro mechanical devices

NASA Astrophysics Data System (ADS)

Smith, H. B., Jr.; Krulac, I. L.

1982-09-01

This document summarizes storage reliability data collected by the US Army Missile Command on electro-mechanical devices over a period of several years. Sources of data are detailed, major failure modes and mechanisms are listed and discussed. Non-operational failure rate prediction methodology is given, and conclusions and recommendations for enhancing the storage reliability of devices are drawn from the analysis of collected data.

The Number of Feedbacks Needed for Reliable Evaluation. A Multilevel Analysis of the Reliability, Stability and Generalisability of Students' Evaluation of Teaching

ERIC Educational Resources Information Center

Rantanen, Pekka

2013-01-01

A multilevel analysis approach was used to analyse students' evaluation of teaching (SET). The low value of inter-rater reliability stresses that any solid conclusions on teaching cannot be made on the basis of single feedbacks. To assess a teacher's general teaching effectiveness, one needs to evaluate four randomly chosen course implementations.…

Failure rate and reliability of the KOMATSU hydraulic excavator in surface limestone mine

NASA Astrophysics Data System (ADS)

Harish Kumar N., S.; Choudhary, R. P.; Murthy, Ch. S. N.

2018-04-01

The model with failure rate function of bathtub-shaped is helpful in reliability analysis of any system and particularly in reliability associated privative maintenance. The usual Weibull distribution is, however, not capable to model the complete lifecycle of the any with a bathtub-shaped failure rate function. In this paper, failure rate and reliability analysis of the KOMATSU hydraulic excavator/shovel in surface mine is presented and also to improve the reliability and decrease the failure rate of each subsystem of the shovel based on the preventive maintenance. The model of the bathtub-shaped for shovel can also be seen as a simplification of the Weibull distribution.

The relationship between cost estimates reliability and BIM adoption: SEM analysis

NASA Astrophysics Data System (ADS)

Ismail, N. A. A.; Idris, N. H.; Ramli, H.; Rooshdi, R. R. Raja Muhammad; Sahamir, S. R.

2018-02-01

This paper presents the usage of Structural Equation Modelling (SEM) approach in analysing the effects of Building Information Modelling (BIM) technology adoption in improving the reliability of cost estimates. Based on the questionnaire survey results, SEM analysis using SPSS-AMOS application examined the relationships between BIM-improved information and cost estimates reliability factors, leading to BIM technology adoption. Six hypotheses were established prior to SEM analysis employing two types of SEM models, namely the Confirmatory Factor Analysis (CFA) model and full structural model. The SEM models were then validated through the assessment on their uni-dimensionality, validity, reliability, and fitness index, in line with the hypotheses tested. The final SEM model fit measures are: P-value=0.000, RMSEA=0.079<0.08, GFI=0.824, CFI=0.962>0.90, TLI=0.956>0.90, NFI=0.935>0.90 and ChiSq/df=2.259; indicating that the overall index values achieved the required level of model fitness. The model supports all the hypotheses evaluated, confirming that all relationship exists amongst the constructs are positive and significant. Ultimately, the analysis verified that most of the respondents foresee better understanding of project input information through BIM visualization, its reliable database and coordinated data, in developing more reliable cost estimates. They also perceive to accelerate their cost estimating task through BIM adoption.

Do you see what I see? Mobile eye-tracker contextual analysis and inter-rater reliability.

PubMed

Stuart, S; Hunt, D; Nell, J; Godfrey, A; Hausdorff, J M; Rochester, L; Alcock, L

2018-02-01

Mobile eye-trackers are currently used during real-world tasks (e.g. gait) to monitor visual and cognitive processes, particularly in ageing and Parkinson's disease (PD). However, contextual analysis involving fixation locations during such tasks is rarely performed due to its complexity. This study adapted a validated algorithm and developed a classification method to semi-automate contextual analysis of mobile eye-tracking data. We further assessed inter-rater reliability of the proposed classification method. A mobile eye-tracker recorded eye-movements during walking in five healthy older adult controls (HC) and five people with PD. Fixations were identified using a previously validated algorithm, which was adapted to provide still images of fixation locations (n = 116). The fixation location was manually identified by two raters (DH, JN), who classified the locations. Cohen's kappa correlation coefficients determined the inter-rater reliability. The algorithm successfully provided still images for each fixation, allowing manual contextual analysis to be performed. The inter-rater reliability for classifying the fixation location was high for both PD (kappa = 0.80, 95% agreement) and HC groups (kappa = 0.80, 91% agreement), which indicated a reliable classification method. This study developed a reliable semi-automated contextual analysis method for gait studies in HC and PD. Future studies could adapt this methodology for various gait-related eye-tracking studies.

Reliability of the School Food Checklist for in-school audits and photograph analysis of children's packed lunches.

PubMed

Mitchell, S A; Miles, C L; Brennan, L; Matthews, J

2010-02-01

Assessment of children's diets is problematic, typically relying on error-prone parent or child recall or reporting, or resource intensive direct observation. The School Food Checklist (SFC) is an objective instrument comprising of 20 food and beverage categories designed to measure the foods contained in children's packed lunches. The present study aimed to assess intra-rater and inter-rater reliability of each of the food and beverage categories of the SFC for both in-school audits and photograph analysis of children's school lunches. Participants comprised 176 children aged 5-8 years from five primary schools in Northern Metropolitan Melbourne. The SFC was used to measure the foods contained in children's packed lunches in the school setting and using photographs. Photograph analysis was conducted by the auditors 2-3 months after completion of in-school audits. Both intra-rater [intra-class correlation coefficient (ICC) = 0.78-1] and inter-rater (ICC = 0.50-0.95) reliability analysis indicated strong agreement for in-school auditing. With the exception of the food category titled 'leftovers', there was strong intra-rater reliability for auditors' live audits and their analysis of photographs [ICC = 0.57-0.98 (Auditor 1); ICC = 0.72-0.90 (Auditor 2)], and strong inter-rater reliability for photograph analysis (ICC = 0.68-0.92). The SFC is a reliable method of measuring the foods and beverages contained in children's packed lunches when used in the school setting or for photograph analysis. This finding has broad implications, particularly for the use of photograph analysis, because this approach offers a convenient and cost effective method of measuring what food and beverages children bring to school in home packed lunches.

Pilot testing of SHRP 2 reliability data and analytical products: Washington. [supporting datasets

DOT National Transportation Integrated Search

2014-01-01

The Washington site used the reliability guide from Project L02, analysis tools for forecasting reliability and estimating impacts from Project L07, Project L08, and Project C11 as well as the guide on reliability performance measures from the Projec...

The Shuttle processing contractors (SPC) reliability program at the Kennedy Space Center - The real world

NASA Astrophysics Data System (ADS)

McCrea, Terry

The Shuttle Processing Contract (SPC) workforce consists of Lockheed Space Operations Co. as prime contractor, with Grumman, Thiokol Corporation, and Johnson Controls World Services as subcontractors. During the design phase, reliability engineering is instrumental in influencing the development of systems that meet the Shuttle fail-safe program requirements. Reliability engineers accomplish this objective by performing FMEA (failure modes and effects analysis) to identify potential single failure points. When technology, time, or resources do not permit a redesign to eliminate a single failure point, the single failure point information is formatted into a change request and presented to senior management of SPC and NASA for risk acceptance. In parallel with the FMEA, safety engineering conducts a hazard analysis to assure that potential hazards to personnel are assessed. The combined effort (FMEA and hazard analysis) is published as a system assurance analysis. Special ground rules and techniques are developed to perform and present the analysis. The reliability program at KSC is vigorously pursued, and has been extremely successful. The ground support equipment and facilities used to launch and land the Space Shuttle maintain an excellent reliability record.

Examining the validity and reliability of the Taita symptom checklist using Rasch analysis.

PubMed

Chen, Yun-Ling; Pan, Ay-Woan; Chung, LyInn; Chen, Tsyr-Jang

2015-03-01

The Taita symptom checklist (TSCL) is a standardized self-rating psychiatric symptom scale for outpatients with mental illness in Taiwan. This study aimed to examine the validity and reliability of the TSCL using Rasch analysis. The TSCL was given to 583 healthy people and 479 people with mental illness. Rasch analysis was used to examine the appropriateness of the rating scale, the unidimensionality of the scale, the differential item functioning across sex and diagnosis, and the Rasch cut-off score of the scale. Rasch analysis confirmed that the revised 37 items with a three-point rating scale of the TSCL demonstrated good internal consistency and met criteria for unidimensionality. The person and item reliability indices were high. The TSCL could reliably measure healthy participants and patients with mental illness. Differential item functioning due to sex or psychiatric diagnosis was evident for three items. A Rasch cut-off score for TSCL was produced for detecting participants' psychiatric symptoms based on an eight-level classification. The TSCL is a reliable and valid assessment to evaluate the participants' perceived disturbance of psychiatric symptoms based on Rasch analysis. Copyright © 2013. Published by Elsevier B.V.

Pocket Handbook on Reliability

DTIC Science & Technology

1975-09-01

exponencial distributions Weibull distribution, -xtimating reliability, confidence intervals, relia- bility growth, 0. P- curves, Bayesian analysis. 20 A S...introduction for those not familiar with reliability and a good refresher for those who are currently working in the area. LEWIS NERI, CHIEF...includes one or both of the following objectives: a) prediction of the current system reliability, b) projection on the system reliability for someI future

Reliability Impacts in Life Support Architecture and Technology Selection

NASA Technical Reports Server (NTRS)

Lange, Kevin E.; Anderson, Molly S.

2011-01-01

Equivalent System Mass (ESM) and reliability estimates were performed for different life support architectures based primarily on International Space Station (ISS) technologies. The analysis was applied to a hypothetical 1-year deep-space mission. High-level fault trees were initially developed relating loss of life support functionality to the Loss of Crew (LOC) top event. System reliability was then expressed as the complement (nonoccurrence) this event and was increased through the addition of redundancy and spares, which added to the ESM. The reliability analysis assumed constant failure rates and used current projected values of the Mean Time Between Failures (MTBF) from an ISS database where available. Results were obtained showing the dependence of ESM on system reliability for each architecture. Although the analysis employed numerous simplifications and many of the input parameters are considered to have high uncertainty, the results strongly suggest that achieving necessary reliabilities for deep-space missions will add substantially to the life support system mass. As a point of reference, the reliability for a single-string architecture using the most regenerative combination of ISS technologies without unscheduled replacement spares was estimated to be less than 1%. The results also demonstrate how adding technologies in a serial manner to increase system closure forces the reliability of other life support technologies to increase in order to meet the system reliability requirement. This increase in reliability results in increased mass for multiple technologies through the need for additional spares. Alternative parallel architecture approaches and approaches with the potential to do more with less are discussed. The tall poles in life support ESM are also reexamined in light of estimated reliability impacts.

DATMAN: A reliability data analysis program using Bayesian updating

DOE Office of Scientific and Technical Information (OSTI.GOV)

Becker, M.; Feltus, M.A.

1996-12-31

Preventive maintenance (PM) techniques focus on the prevention of failures, in particular, system components that are important to plant functions. Reliability-centered maintenance (RCM) improves on the PM techniques by introducing a set of guidelines by which to evaluate the system functions. It also minimizes intrusive maintenance, labor, and equipment downtime without sacrificing system performance when its function is essential for plant safety. Both the PM and RCM approaches require that system reliability data be updated as more component failures and operation time are acquired. Systems reliability and the likelihood of component failures can be calculated by Bayesian statistical methods, whichmore » can update these data. The DATMAN computer code has been developed at Penn State to simplify the Bayesian analysis by performing tedious calculations needed for RCM reliability analysis. DATMAN reads data for updating, fits a distribution that best fits the data, and calculates component reliability. DATMAN provides a user-friendly interface menu that allows the user to choose from several common prior and posterior distributions, insert new failure data, and visually select the distribution that matches the data most accurately.« less

Reliability and validity of the PedsQL™ Generic Core Scales 4.0 for Chinese children with epilepsy.

PubMed

Duan, Xiaoling; Zhang, Shuqing; Xiao, Nong

2012-04-01

This investigation examines the reliability and validity of the Chinese version of the PedsQL 4.0 Generic Core Scales for prognostic measures of pediatric epilepsy. The study comprised 163 parents whose children, between the ages of 2 and 18 years, were diagnosed with epilepsy. The parents were given a questionnaire to be completed on behalf of the child. Reliability was assessed by Cronbach's alpha analysis. Validity was assessed by the exploratory factor analysis and intercorrelation analysis between the four subscales as well as Student's t-test. The internal consistency reliability for Total Scale Score was 0.94 by Cronbach's alpha test. Four major factors were extracted by factor analysis. The scores from all sub-scales derived from healthy children were significantly higher than children with epilepsy (P<0.001). The reliability and validity of the parent proxy-report scales from the Chinese version of the PedsQL™ 4.0 Generic Core Scales effectively matched the original version and could be used to evaluate the health-related quality of life of children with epilepsy. Copyright © 2012 Elsevier Inc. All rights reserved.

On the next generation of reliability analysis tools

NASA Technical Reports Server (NTRS)

Babcock, Philip S., IV; Leong, Frank; Gai, Eli

1987-01-01

The current generation of reliability analysis tools concentrates on improving the efficiency of the description and solution of the fault-handling processes and providing a solution algorithm for the full system model. The tools have improved user efficiency in these areas to the extent that the problem of constructing the fault-occurrence model is now the major analysis bottleneck. For the next generation of reliability tools, it is proposed that techniques be developed to improve the efficiency of the fault-occurrence model generation and input. Further, the goal is to provide an environment permitting a user to provide a top-down design description of the system from which a Markov reliability model is automatically constructed. Thus, the user is relieved of the tedious and error-prone process of model construction, permitting an efficient exploration of the design space, and an independent validation of the system's operation is obtained. An additional benefit of automating the model construction process is the opportunity to reduce the specialized knowledge required. Hence, the user need only be an expert in the system he is analyzing; the expertise in reliability analysis techniques is supplied.

Analysis of strain gage reliability in F-100 jet engine testing at NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Holanda, R.

1983-01-01

A reliability analysis was performed on 64 strain gage systems mounted on the 3 rotor stages of the fan of a YF-100 engine. The strain gages were used in a 65 hour fan flutter research program which included about 5 hours of blade flutter. The analysis was part of a reliability improvement program. Eighty-four percent of the strain gages survived the test and performed satisfactorily. A post test analysis determined most failure causes. Five failures were caused by open circuits, three failed gages showed elevated circuit resistance, and one gage circuit was grounded. One failure was undetermined.

The Challenges of Credible Thermal Protection System Reliability Quantification

NASA Technical Reports Server (NTRS)

Green, Lawrence L.

2013-01-01

The paper discusses several of the challenges associated with developing a credible reliability estimate for a human-rated crew capsule thermal protection system. The process of developing such a credible estimate is subject to the quantification, modeling and propagation of numerous uncertainties within a probabilistic analysis. The development of specific investment recommendations, to improve the reliability prediction, among various potential testing and programmatic options is then accomplished through Bayesian analysis.

Orbiter Autoland reliability analysis

NASA Technical Reports Server (NTRS)

Welch, D. Phillip

1993-01-01

The Space Shuttle Orbiter is the only space reentry vehicle in which the crew is seated upright. This position presents some physiological effects requiring countermeasures to prevent a crewmember from becoming incapacitated. This also introduces a potential need for automated vehicle landing capability. Autoland is a primary procedure that was identified as a requirement for landing following and extended duration orbiter mission. This report documents the results of the reliability analysis performed on the hardware required for an automated landing. A reliability block diagram was used to evaluate system reliability. The analysis considers the manual and automated landing modes currently available on the Orbiter. (Autoland is presently a backup system only.) Results of this study indicate a +/- 36 percent probability of successfully extending a nominal mission to 30 days. Enough variations were evaluated to verify that the reliability could be altered with missions planning and procedures. If the crew is modeled as being fully capable after 30 days, the probability of a successful manual landing is comparable to that of Autoland because much of the hardware is used for both manual and automated landing modes. The analysis indicates that the reliability for the manual mode is limited by the hardware and depends greatly on crew capability. Crew capability for a successful landing after 30 days has not been determined yet.

Researcher Biographies

Science.gov Websites

interest: mechanical system design sensitivity analysis and optimization of linear and nonlinear structural systems, reliability analysis and reliability-based design optimization, computational methods in committee member, ISSMO; Associate Editor, Mechanics Based Design of Structures and Machines; Associate

Paediatric Automatic Phonological Analysis Tools (APAT).

PubMed

Saraiva, Daniela; Lousada, Marisa; Hall, Andreia; Jesus, Luis M T

2017-12-01

To develop the pediatric Automatic Phonological Analysis Tools (APAT) and to estimate inter and intrajudge reliability, content validity, and concurrent validity. The APAT were constructed using Excel spreadsheets with formulas. The tools were presented to an expert panel for content validation. The corpus used in the Portuguese standardized test Teste Fonético-Fonológico - ALPE produced by 24 children with phonological delay or phonological disorder was recorded, transcribed, and then inserted into the APAT. Reliability and validity of APAT were analyzed. The APAT present strong inter- and intrajudge reliability (>97%). The content validity was also analyzed (ICC = 0.71), and concurrent validity revealed strong correlations between computerized and manual (traditional) methods. The development of these tools contributes to fill existing gaps in clinical practice and research, since previously there were no valid and reliable tools/instruments for automatic phonological analysis, which allowed the analysis of different corpora.

Reliably detectable flaw size for NDE methods that use calibration

NASA Astrophysics Data System (ADS)

Koshti, Ajay M.

2017-04-01

Probability of detection (POD) analysis is used in assessing reliably detectable flaw size in nondestructive evaluation (NDE). MIL-HDBK-1823 and associated mh18232 POD software gives most common methods of POD analysis. In this paper, POD analysis is applied to an NDE method, such as eddy current testing, where calibration is used. NDE calibration standards have known size artificial flaws such as electro-discharge machined (EDM) notches and flat bottom hole (FBH) reflectors which are used to set instrument sensitivity for detection of real flaws. Real flaws such as cracks and crack-like flaws are desired to be detected using these NDE methods. A reliably detectable crack size is required for safe life analysis of fracture critical parts. Therefore, it is important to correlate signal responses from real flaws with signal responses form artificial flaws used in calibration process to determine reliably detectable flaw size.

Reliability Analysis for AFTI-F16 SRFCS Using ASSIST and SURE

NASA Technical Reports Server (NTRS)

Wu, N. Eva

2001-01-01

This paper reports the results of a study on reliability analysis of an AFTI-16 Self-Repairing Flight Control System (SRFCS) using software tools SURE (Semi-Markov Unreliability Range Evaluator and ASSIST (Abstract Semi-Markov Specification Interface to the SURE Tool). The purpose of the study is to investigate the potential utility of the software tools in the ongoing effort of the NASA Aviation Safety Program, where the class of systems must be extended beyond the originally intended serving class of electronic digital processors. The study concludes that SURE and ASSIST are applicable to reliability, analysis of flight control systems. They are especially efficient for sensitivity analysis that quantifies the dependence of system reliability on model parameters. The study also confirms an earlier finding on the dominant role of a parameter called a failure coverage. The paper will remark on issues related to the improvement of coverage and the optimization of redundancy level.

Reliably Detectable Flaw Size for NDE Methods that Use Calibration

NASA Technical Reports Server (NTRS)

Koshti, Ajay M.

2017-01-01

Probability of detection (POD) analysis is used in assessing reliably detectable flaw size in nondestructive evaluation (NDE). MIL-HDBK-1823 and associated mh1823 POD software gives most common methods of POD analysis. In this paper, POD analysis is applied to an NDE method, such as eddy current testing, where calibration is used. NDE calibration standards have known size artificial flaws such as electro-discharge machined (EDM) notches and flat bottom hole (FBH) reflectors which are used to set instrument sensitivity for detection of real flaws. Real flaws such as cracks and crack-like flaws are desired to be detected using these NDE methods. A reliably detectable crack size is required for safe life analysis of fracture critical parts. Therefore, it is important to correlate signal responses from real flaws with signal responses form artificial flaws used in calibration process to determine reliably detectable flaw size.

Confirmatory Factor Analysis of the System for Evaluation of Teaching Qualities (SETQ) in Graduate Medical Training.

PubMed

Boerebach, Benjamin C M; Lombarts, Kiki M J M H; Arah, Onyebuchi A

2016-03-01

The System for Evaluation of Teaching Qualities (SETQ) was developed as a formative system for the continuous evaluation and development of physicians' teaching performance in graduate medical training. It has been seven years since the introduction and initial exploratory psychometric analysis of the SETQ questionnaires. This study investigates the validity and reliability of the SETQ questionnaires across hospitals and medical specialties using confirmatory factor analyses (CFAs), reliability analysis, and generalizability analysis. The SETQ questionnaires were tested in a sample of 3,025 physicians and 2,848 trainees in 46 hospitals. The CFA revealed acceptable fit of the data to the previously identified five-factor model. The high internal consistency estimates suggest satisfactory reliability of the subscales. These results provide robust evidence for the validity and reliability of the SETQ questionnaires for evaluating physicians' teaching performance. © The Author(s) 2014.

Reliability and availability analysis of a 10 kW@20 K helium refrigerator

NASA Astrophysics Data System (ADS)

Li, J.; Xiong, L. Y.; Liu, L. Q.; Wang, H. R.; Wang, B. M.

2017-02-01

A 10 kW@20 K helium refrigerator has been established in the Technical Institute of Physics and Chemistry, Chinese Academy of Sciences. To evaluate and improve this refrigerator’s reliability and availability, a reliability and availability analysis is performed. According to the mission profile of this refrigerator, a functional analysis is performed. The failure data of the refrigerator components are collected and failure rate distributions are fitted by software Weibull++ V10.0. A Failure Modes, Effects & Criticality Analysis (FMECA) is performed and the critical components with higher risks are pointed out. Software BlockSim V9.0 is used to calculate the reliability and the availability of this refrigerator. The result indicates that compressors, turbine and vacuum pump are the critical components and the key units of this refrigerator. The mitigation actions with respect to design, testing, maintenance and operation are proposed to decrease those major and medium risks.

Competing risk models in reliability systems, an exponential distribution model with Bayesian analysis approach

NASA Astrophysics Data System (ADS)

Iskandar, I.

2018-03-01

The exponential distribution is the most widely used reliability analysis. This distribution is very suitable for representing the lengths of life of many cases and is available in a simple statistical form. The characteristic of this distribution is a constant hazard rate. The exponential distribution is the lower rank of the Weibull distributions. In this paper our effort is to introduce the basic notions that constitute an exponential competing risks model in reliability analysis using Bayesian analysis approach and presenting their analytic methods. The cases are limited to the models with independent causes of failure. A non-informative prior distribution is used in our analysis. This model describes the likelihood function and follows with the description of the posterior function and the estimations of the point, interval, hazard function, and reliability. The net probability of failure if only one specific risk is present, crude probability of failure due to a specific risk in the presence of other causes, and partial crude probabilities are also included.

Probabilistic fatigue methodology for six nines reliability

NASA Technical Reports Server (NTRS)

Everett, R. A., Jr.; Bartlett, F. D., Jr.; Elber, Wolf

1990-01-01

Fleet readiness and flight safety strongly depend on the degree of reliability that can be designed into rotorcraft flight critical components. The current U.S. Army fatigue life specification for new rotorcraft is the so-called six nines reliability, or a probability of failure of one in a million. The progress of a round robin which was established by the American Helicopter Society (AHS) Subcommittee for Fatigue and Damage Tolerance is reviewed to investigate reliability-based fatigue methodology. The participants in this cooperative effort are in the U.S. Army Aviation Systems Command (AVSCOM) and the rotorcraft industry. One phase of the joint activity examined fatigue reliability under uniquely defined conditions for which only one answer was correct. The other phases were set up to learn how the different industry methods in defining fatigue strength affected the mean fatigue life and reliability calculations. Hence, constant amplitude and spectrum fatigue test data were provided so that each participant could perform their standard fatigue life analysis. As a result of this round robin, the probabilistic logic which includes both fatigue strength and spectrum loading variability in developing a consistant reliability analysis was established. In this first study, the reliability analysis was limited to the linear cumulative damage approach. However, it is expected that superior fatigue life prediction methods will ultimately be developed through this open AHS forum. To that end, these preliminary results were useful in identifying some topics for additional study.

Survey of critical failure events in on-chip interconnect by fault tree analysis

NASA Astrophysics Data System (ADS)

Yokogawa, Shinji; Kunii, Kyousuke

2018-07-01

In this paper, a framework based on reliability physics is proposed for adopting fault tree analysis (FTA) to the on-chip interconnect system of a semiconductor. By integrating expert knowledge and experience regarding the possibilities of failure on basic events, critical issues of on-chip interconnect reliability will be evaluated by FTA. In particular, FTA is used to identify the minimal cut sets with high risk priority. Critical events affecting the on-chip interconnect reliability are identified and discussed from the viewpoint of long-term reliability assessment. The moisture impact is evaluated as an external event.

Investigation of reliability indicators of information analysis systems based on Markov’s absorbing chain model

NASA Astrophysics Data System (ADS)

Gilmanshin, I. R.; Kirpichnikov, A. P.

2017-09-01

In the result of study of the algorithm of the functioning of the early detection module of excessive losses, it is proven the ability to model it by using absorbing Markov chains. The particular interest is in the study of probability characteristics of early detection module functioning algorithm of losses in order to identify the relationship of indicators of reliability of individual elements, or the probability of occurrence of certain events and the likelihood of transmission of reliable information. The identified relations during the analysis allow to set thresholds reliability characteristics of the system components.

Psychometric considerations in the measurement of event-related brain potentials: Guidelines for measurement and reporting.

PubMed

Clayson, Peter E; Miller, Gregory A

2017-01-01

Failing to consider psychometric issues related to reliability and validity, differential deficits, and statistical power potentially undermines the conclusions of a study. In research using event-related brain potentials (ERPs), numerous contextual factors (population sampled, task, data recording, analysis pipeline, etc.) can impact the reliability of ERP scores. The present review considers the contextual factors that influence ERP score reliability and the downstream effects that reliability has on statistical analyses. Given the context-dependent nature of ERPs, it is recommended that ERP score reliability be formally assessed on a study-by-study basis. Recommended guidelines for ERP studies include 1) reporting the threshold of acceptable reliability and reliability estimates for observed scores, 2) specifying the approach used to estimate reliability, and 3) justifying how trial-count minima were chosen. A reliability threshold for internal consistency of at least 0.70 is recommended, and a threshold of 0.80 is preferred. The review also advocates the use of generalizability theory for estimating score dependability (the generalizability theory analog to reliability) as an improvement on classical test theory reliability estimates, suggesting that the latter is less well suited to ERP research. To facilitate the calculation and reporting of dependability estimates, an open-source Matlab program, the ERP Reliability Analysis Toolbox, is presented. Copyright © 2016 Elsevier B.V. All rights reserved.

Towards early software reliability prediction for computer forensic tools (case study).

PubMed

Abu Talib, Manar

2016-01-01

Versatility, flexibility and robustness are essential requirements for software forensic tools. Researchers and practitioners need to put more effort into assessing this type of tool. A Markov model is a robust means for analyzing and anticipating the functioning of an advanced component based system. It is used, for instance, to analyze the reliability of the state machines of real time reactive systems. This research extends the architecture-based software reliability prediction model for computer forensic tools, which is based on Markov chains and COSMIC-FFP. Basically, every part of the computer forensic tool is linked to a discrete time Markov chain. If this can be done, then a probabilistic analysis by Markov chains can be performed to analyze the reliability of the components and of the whole tool. The purposes of the proposed reliability assessment method are to evaluate the tool's reliability in the early phases of its development, to improve the reliability assessment process for large computer forensic tools over time, and to compare alternative tool designs. The reliability analysis can assist designers in choosing the most reliable topology for the components, which can maximize the reliability of the tool and meet the expected reliability level specified by the end-user. The approach of assessing component-based tool reliability in the COSMIC-FFP context is illustrated with the Forensic Toolkit Imager case study.

Covariate-free and Covariate-dependent Reliability.

PubMed

Bentler, Peter M

2016-12-01

Classical test theory reliability coefficients are said to be population specific. Reliability generalization, a meta-analysis method, is the main procedure for evaluating the stability of reliability coefficients across populations. A new approach is developed to evaluate the degree of invariance of reliability coefficients to population characteristics. Factor or common variance of a reliability measure is partitioned into parts that are, and are not, influenced by control variables, resulting in a partition of reliability into a covariate-dependent and a covariate-free part. The approach can be implemented in a single sample and can be applied to a variety of reliability coefficients.

A Novel Ontology Approach to Support Design for Reliability considering Environmental Effects

PubMed Central

Sun, Bo; Li, Yu; Ye, Tianyuan

2015-01-01

Environmental effects are not considered sufficiently in product design. Reliability problems caused by environmental effects are very prominent. This paper proposes a method to apply ontology approach in product design. During product reliability design and analysis, environmental effects knowledge reusing is achieved. First, the relationship of environmental effects and product reliability is analyzed. Then environmental effects ontology to describe environmental effects domain knowledge is designed. Related concepts of environmental effects are formally defined by using the ontology approach. This model can be applied to arrange environmental effects knowledge in different environments. Finally, rubber seals used in the subhumid acid rain environment are taken as an example to illustrate ontological model application on reliability design and analysis. PMID:25821857

A novel ontology approach to support design for reliability considering environmental effects.

PubMed

Sun, Bo; Li, Yu; Ye, Tianyuan; Ren, Yi

2015-01-01

Environmental effects are not considered sufficiently in product design. Reliability problems caused by environmental effects are very prominent. This paper proposes a method to apply ontology approach in product design. During product reliability design and analysis, environmental effects knowledge reusing is achieved. First, the relationship of environmental effects and product reliability is analyzed. Then environmental effects ontology to describe environmental effects domain knowledge is designed. Related concepts of environmental effects are formally defined by using the ontology approach. This model can be applied to arrange environmental effects knowledge in different environments. Finally, rubber seals used in the subhumid acid rain environment are taken as an example to illustrate ontological model application on reliability design and analysis.

Ceramic component reliability with the restructured NASA/CARES computer program

NASA Technical Reports Server (NTRS)

Powers, Lynn M.; Starlinger, Alois; Gyekenyesi, John P.

1992-01-01

The Ceramics Analysis and Reliability Evaluation of Structures (CARES) integrated design program on statistical fast fracture reliability and monolithic ceramic components is enhanced to include the use of a neutral data base, two-dimensional modeling, and variable problem size. The data base allows for the efficient transfer of element stresses, temperatures, and volumes/areas from the finite element output to the reliability analysis program. Elements are divided to insure a direct correspondence between the subelements and the Gaussian integration points. Two-dimensional modeling is accomplished by assessing the volume flaw reliability with shell elements. To demonstrate the improvements in the algorithm, example problems are selected from a round-robin conducted by WELFEP (WEakest Link failure probability prediction by Finite Element Postprocessors).

Test-retest reliability of computer-based video analysis of general movements in healthy term-born infants.

PubMed

Valle, Susanne Collier; Støen, Ragnhild; Sæther, Rannei; Jensenius, Alexander Refsum; Adde, Lars

2015-10-01

A computer-based video analysis has recently been presented for quantitative assessment of general movements (GMs). This method's test-retest reliability, however, has not yet been evaluated. The aim of the current study was to evaluate the test-retest reliability of computer-based video analysis of GMs, and to explore the association between computer-based video analysis and the temporal organization of fidgety movements (FMs). Test-retest reliability study. 75 healthy, term-born infants were recorded twice the same day during the FMs period using a standardized video set-up. The computer-based movement variables "quantity of motion mean" (Qmean), "quantity of motion standard deviation" (QSD) and "centroid of motion standard deviation" (CSD) were analyzed, reflecting the amount of motion and the variability of the spatial center of motion of the infant, respectively. In addition, the association between the variable CSD and the temporal organization of FMs was explored. Intraclass correlation coefficients (ICC 1.1 and ICC 3.1) were calculated to assess test-retest reliability. The ICC values for the variables CSD, Qmean and QSD were 0.80, 0.80 and 0.86 for ICC (1.1), respectively; and 0.80, 0.86 and 0.90 for ICC (3.1), respectively. There were significantly lower CSD values in the recordings with continual FMs compared to the recordings with intermittent FMs (p<0.05). This study showed high test-retest reliability of computer-based video analysis of GMs, and a significant association between our computer-based video analysis and the temporal organization of FMs. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

JUPITER PROJECT - JOINT UNIVERSAL PARAMETER IDENTIFICATION AND EVALUATION OF RELIABILITY

EPA Science Inventory

The JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) project builds on the technology of two widely used codes for sensitivity analysis, data assessment, calibration, and uncertainty analysis of environmental models: PEST and UCODE.

Performance Evaluation of Reliable Multicast Protocol for Checkout and Launch Control Systems

NASA Technical Reports Server (NTRS)

Shu, Wei Wennie; Porter, John

2000-01-01

The overall objective of this project is to study reliability and performance of Real Time Critical Network (RTCN) for checkout and launch control systems (CLCS). The major tasks include reliability and performance evaluation of Reliable Multicast (RM) package and fault tolerance analysis and design of dual redundant network architecture.

The Yale-Brown Obsessive Compulsive Scale: A Reliability Generalization Meta-Analysis.

PubMed

López-Pina, José Antonio; Sánchez-Meca, Julio; López-López, José Antonio; Marín-Martínez, Fulgencio; Núñez-Núñez, Rosa Maria; Rosa-Alcázar, Ana I; Gómez-Conesa, Antonia; Ferrer-Requena, Josefa

2015-10-01

The Yale-Brown Obsessive Compulsive Scale (Y-BOCS) is the most frequently applied test to assess obsessive compulsive symptoms. We conducted a reliability generalization meta-analysis on the Y-BOCS to estimate the average reliability, examine the variability among the reliability estimates, search for moderators, and propose a predictive model that researchers and clinicians can use to estimate the expected reliability of the Y-BOCS. We included studies where the Y-BOCS was applied to a sample of adults and reliability estimate was reported. Out of the 11,490 references located, 144 studies met the selection criteria. For the total scale, the mean reliability was 0.866 for coefficients alpha, 0.848 for test-retest correlations, and 0.922 for intraclass correlations. The moderator analyses led to a predictive model where the standard deviation of the total test and the target population (clinical vs. nonclinical) explained 38.6% of the total variability among coefficients alpha. Finally, clinical implications of the results are discussed. © The Author(s) 2014.

Evaluation Applied to Reliability Analysis of Reconfigurable, Highly Reliable, Fault-Tolerant, Computing Systems for Avionics

NASA Technical Reports Server (NTRS)

Migneault, G. E.

1979-01-01

Emulation techniques are proposed as a solution to a difficulty arising in the analysis of the reliability of highly reliable computer systems for future commercial aircraft. The difficulty, viz., the lack of credible precision in reliability estimates obtained by analytical modeling techniques are established. The difficulty is shown to be an unavoidable consequence of: (1) a high reliability requirement so demanding as to make system evaluation by use testing infeasible, (2) a complex system design technique, fault tolerance, (3) system reliability dominated by errors due to flaws in the system definition, and (4) elaborate analytical modeling techniques whose precision outputs are quite sensitive to errors of approximation in their input data. The technique of emulation is described, indicating how its input is a simple description of the logical structure of a system and its output is the consequent behavior. The use of emulation techniques is discussed for pseudo-testing systems to evaluate bounds on the parameter values needed for the analytical techniques.

An Energy-Based Limit State Function for Estimation of Structural Reliability in Shock Environments

DOE PAGES

Guthrie, Michael A.

2013-01-01

limit state function is developed for the estimation of structural reliability in shock environments. This limit state function uses peak modal strain energies to characterize environmental severity and modal strain energies at failure to characterize the structural capacity. The Hasofer-Lind reliability index is briefly reviewed and its computation for the energy-based limit state function is discussed. Applications to two degree of freedom mass-spring systems and to a simple finite element model are considered. For these examples, computation of the reliability index requires little effort beyond a modal analysis, but still accounts for relevant uncertainties in both the structure and environment.more » For both examples, the reliability index is observed to agree well with the results of Monte Carlo analysis. In situations where fast, qualitative comparison of several candidate designs is required, the reliability index based on the proposed limit state function provides an attractive metric which can be used to compare and control reliability.« less

Reliability analysis of composite structures

NASA Technical Reports Server (NTRS)

Kan, Han-Pin

1992-01-01

A probabilistic static stress analysis methodology has been developed to estimate the reliability of a composite structure. Closed form stress analysis methods are the primary analytical tools used in this methodology. These structural mechanics methods are used to identify independent variables whose variations significantly affect the performance of the structure. Once these variables are identified, scatter in their values is evaluated and statistically characterized. The scatter in applied loads and the structural parameters are then fitted to appropriate probabilistic distribution functions. Numerical integration techniques are applied to compute the structural reliability. The predicted reliability accounts for scatter due to variability in material strength, applied load, fabrication and assembly processes. The influence of structural geometry and mode of failure are also considerations in the evaluation. Example problems are given to illustrate various levels of analytical complexity.

Estimates Of The Orbiter RSI Thermal Protection System Thermal Reliability

NASA Technical Reports Server (NTRS)

Kolodziej, P.; Rasky, D. J.

2002-01-01

In support of the Space Shuttle Orbiter post-flight inspection, structure temperatures are recorded at selected positions on the windward, leeward, starboard and port surfaces. Statistical analysis of this flight data and a non-dimensional load interference (NDLI) method are used to estimate the thermal reliability at positions were reusable surface insulation (RSI) is installed. In this analysis, structure temperatures that exceed the design limit define the critical failure mode. At thirty-three positions the RSI thermal reliability is greater than 0.999999 for the missions studied. This is not the overall system level reliability of the thermal protection system installed on an Orbiter. The results from two Orbiters, OV-102 and OV-105, are in good agreement. The original RSI designs on the OV-102 Orbital Maneuvering System pods, which had low reliability, were significantly improved on OV-105. The NDLI method was also used to estimate thermal reliability from an assessment of TPS uncertainties that was completed shortly before the first Orbiter flight. Results fiom the flight data analysis and the pre-flight assessment agree at several positions near each other. The NDLI method is also effective for optimizing RSI designs to provide uniform thermal reliability on the acreage surface of reusable launch vehicles.

Reliability of recurrence quantification analysis measures of the center of pressure during standing in individuals with musculoskeletal disorders.

PubMed

Mazaheri, Masood; Negahban, Hossein; Salavati, Mahyar; Sanjari, Mohammad Ali; Parnianpour, Mohamad

2010-09-01

Although the application of nonlinear tools including recurrence quantification analysis (RQA) has increasingly grown in the recent years especially in balance-disordered populations, there have been few studies which determine their measurement properties. Therefore, a methodological study was performed to estimate the intersession and intrasession reliability of some dynamic features provided by RQA for nonlinear analysis of center of pressure (COP) signals recorded during quiet standing in a sample of patients with musculoskeletal disorders (MSDs) including low back pain (LBP), anterior cruciate ligament (ACL) injury and functional ankle instability (FAI). The subjects completed postural measurements with three levels of difficulty (rigid surface-eyes open, rigid surface-eyes closed, and foam surface-eyes closed). Four RQA measures (% recurrence, % determinism, entropy, and trend) were extracted from the recurrence plot. Relative reliability of these measures was assessed using intraclass correlation coefficient and absolute reliability using standard error of measurement and coefficient of variation. % Determinism and entropy were the most reliable features of RQA for the both intersession and intrasession reliability measures. High level of reliability of % determinism and entropy in this preliminary investigation may show their clinical promise for discriminative and evaluative purposes of balance performance. 2010 IPEM. Published by Elsevier Ltd. All rights reserved.

Reliability and Validity of the Chinese Version of FACIT-AI, a New Tool for Assessing Quality of Life in Patients with Malignant Ascites.

PubMed

Lou, Yanni; Lu, Linghui; Li, Yuan; Liu, Meng; Bredle, Jason M; Jia, Liqun

2015-10-01

The study objective was to determine the reliability and validity of the Chinese version of the Functional Assessment of Chronic Illness Therapy - Ascites Index (FACIT-AI). A forward-backward translation procedure was adopted to develop the Chinese version of the FACIT-AI, which was tested in 69 patients with malignant ascites. Cronbach's α, split-half reliability, and test-retest reliability were used to assess the reliability of the scale. The content validity index was used to assess the content validity, while factor analysis was used for construct validity and correlation analysis was used for criterion validity. The Cronbach's α was 0.772 for the total scale, and the split-half reliability was 0.693. The test-retest correlation was 0.972. The content validity index for the scale was 0.8-1.0. Four factors were extracted by factor analysis, and these contributed 63.51% of the total variance. Item-total correlations ranged from 0.591 to 0.897, and these were correlated with visual analog scale scores (correlation coefficient, 0.889; P<0.01). The Chinese version of the FACIT-AI has good reliability and validity and can be used as a tool to measure quality of life in Chinese patients with malignant ascites.

Software Reliability Analysis of NASA Space Flight Software: A Practical Experience

PubMed Central

Sukhwani, Harish; Alonso, Javier; Trivedi, Kishor S.; Mcginnis, Issac

2017-01-01

In this paper, we present the software reliability analysis of the flight software of a recently launched space mission. For our analysis, we use the defect reports collected during the flight software development. We find that this software was developed in multiple releases, each release spanning across all software life-cycle phases. We also find that the software releases were developed and tested for four different hardware platforms, spanning from off-the-shelf or emulation hardware to actual flight hardware. For releases that exhibit reliability growth or decay, we fit Software Reliability Growth Models (SRGM); otherwise we fit a distribution function. We find that most releases exhibit reliability growth, with Log-Logistic (NHPP) and S-Shaped (NHPP) as the best-fit SRGMs. For the releases that experience reliability decay, we investigate the causes for the same. We find that such releases were the first software releases to be tested on a new hardware platform, and hence they encountered major hardware integration issues. Also such releases seem to have been developed under time pressure in order to start testing on the new hardware platform sooner. Such releases exhibit poor reliability growth, and hence exhibit high predicted failure rate. Other problems include hardware specification changes and delivery delays from vendors. Thus, our analysis provides critical insights and inputs to the management to improve the software development process. As NASA has moved towards a product line engineering for its flight software development, software for future space missions will be developed in a similar manner and hence the analysis results for this mission can be considered as a baseline for future flight software missions. PMID:29278255

Software Reliability Analysis of NASA Space Flight Software: A Practical Experience.

PubMed

Sukhwani, Harish; Alonso, Javier; Trivedi, Kishor S; Mcginnis, Issac

2016-01-01

In this paper, we present the software reliability analysis of the flight software of a recently launched space mission. For our analysis, we use the defect reports collected during the flight software development. We find that this software was developed in multiple releases, each release spanning across all software life-cycle phases. We also find that the software releases were developed and tested for four different hardware platforms, spanning from off-the-shelf or emulation hardware to actual flight hardware. For releases that exhibit reliability growth or decay, we fit Software Reliability Growth Models (SRGM); otherwise we fit a distribution function. We find that most releases exhibit reliability growth, with Log-Logistic (NHPP) and S-Shaped (NHPP) as the best-fit SRGMs. For the releases that experience reliability decay, we investigate the causes for the same. We find that such releases were the first software releases to be tested on a new hardware platform, and hence they encountered major hardware integration issues. Also such releases seem to have been developed under time pressure in order to start testing on the new hardware platform sooner. Such releases exhibit poor reliability growth, and hence exhibit high predicted failure rate. Other problems include hardware specification changes and delivery delays from vendors. Thus, our analysis provides critical insights and inputs to the management to improve the software development process. As NASA has moved towards a product line engineering for its flight software development, software for future space missions will be developed in a similar manner and hence the analysis results for this mission can be considered as a baseline for future flight software missions.

Distributed collaborative response surface method for mechanical dynamic assembly reliability design

NASA Astrophysics Data System (ADS)

Bai, Guangchen; Fei, Chengwei

2013-11-01

Because of the randomness of many impact factors influencing the dynamic assembly relationship of complex machinery, the reliability analysis of dynamic assembly relationship needs to be accomplished considering the randomness from a probabilistic perspective. To improve the accuracy and efficiency of dynamic assembly relationship reliability analysis, the mechanical dynamic assembly reliability(MDAR) theory and a distributed collaborative response surface method(DCRSM) are proposed. The mathematic model of DCRSM is established based on the quadratic response surface function, and verified by the assembly relationship reliability analysis of aeroengine high pressure turbine(HPT) blade-tip radial running clearance(BTRRC). Through the comparison of the DCRSM, traditional response surface method(RSM) and Monte Carlo Method(MCM), the results show that the DCRSM is not able to accomplish the computational task which is impossible for the other methods when the number of simulation is more than 100 000 times, but also the computational precision for the DCRSM is basically consistent with the MCM and improved by 0.40˜4.63% to the RSM, furthermore, the computational efficiency of DCRSM is up to about 188 times of the MCM and 55 times of the RSM under 10000 times simulations. The DCRSM is demonstrated to be a feasible and effective approach for markedly improving the computational efficiency and accuracy of MDAR analysis. Thus, the proposed research provides the promising theory and method for the MDAR design and optimization, and opens a novel research direction of probabilistic analysis for developing the high-performance and high-reliability of aeroengine.

Reliability and mass analysis of dynamic power conversion systems with parallel of standby redundancy

NASA Technical Reports Server (NTRS)

Juhasz, A. J.; Bloomfield, H. S.

1985-01-01

A combinatorial reliability approach is used to identify potential dynamic power conversion systems for space mission applications. A reliability and mass analysis is also performed, specifically for a 100 kWe nuclear Brayton power conversion system with parallel redundancy. Although this study is done for a reactor outlet temperature of 1100K, preliminary system mass estimates are also included for reactor outlet temperatures ranging up to 1500 K.

Reliability analysis and utilization of PEMs in space application

NASA Astrophysics Data System (ADS)

Jiang, Xiujie; Wang, Zhihua; Sun, Huixian; Chen, Xiaomin; Zhao, Tianlin; Yu, Guanghua; Zhou, Changyi

2009-11-01

More and more plastic encapsulated microcircuits (PEMs) are used in space missions to achieve high performance. Since PEMs are designed for use in terrestrial operating conditions, the successful usage of PEMs in space harsh environment is closely related to reliability issues, which should be considered firstly. However, there is no ready-made methodology for PEMs in space applications. This paper discusses the reliability for the usage of PEMs in space. This reliability analysis can be divided into five categories: radiation test, radiation hardness, screening test, reliability calculation and reliability assessment. One case study is also presented to illuminate the details of the process, in which a PEM part is used in a joint space program Double-Star Project between the European Space Agency (ESA) and China. The influence of environmental constrains including radiation, humidity, temperature and mechanics on the PEM part has been considered. Both Double-Star Project satellites are still running well in space now.

Intersession reliability of fMRI activation for heat pain and motor tasks

PubMed Central

Quiton, Raimi L.; Keaser, Michael L.; Zhuo, Jiachen; Gullapalli, Rao P.; Greenspan, Joel D.

2014-01-01

As the practice of conducting longitudinal fMRI studies to assess mechanisms of pain-reducing interventions becomes more common, there is a great need to assess the test–retest reliability of the pain-related BOLD fMRI signal across repeated sessions. This study quantitatively evaluated the reliability of heat pain-related BOLD fMRI brain responses in healthy volunteers across 3 sessions conducted on separate days using two measures: (1) intraclass correlation coefficients (ICC) calculated based on signal amplitude and (2) spatial overlap. The ICC analysis of pain-related BOLD fMRI responses showed fair-to-moderate intersession reliability in brain areas regarded as part of the cortical pain network. Areas with the highest intersession reliability based on the ICC analysis included the anterior midcingulate cortex, anterior insula, and second somatosensory cortex. Areas with the lowest intersession reliability based on the ICC analysis also showed low spatial reliability; these regions included pregenual anterior cingulate cortex, primary somatosensory cortex, and posterior insula. Thus, this study found regional differences in pain-related BOLD fMRI response reliability, which may provide useful information to guide longitudinal pain studies. A simple motor task (finger-thumb opposition) was performed by the same subjects in the same sessions as the painful heat stimuli were delivered. Intersession reliability of fMRI activation in cortical motor areas was comparable to previously published findings for both spatial overlap and ICC measures, providing support for the validity of the analytical approach used to assess intersession reliability of pain-related fMRI activation. A secondary finding of this study is that the use of standard ICC alone as a measure of reliability may not be sufficient, as the underlying variance structure of an fMRI dataset can result in inappropriately high ICC values; a method to eliminate these false positive results was used in this study and is recommended for future studies of test–retest reliability. PMID:25161897

Is laser speckle contrast analysis (LASCA) the new kid on the block in systemic sclerosis? A systematic literature review and pilot study to evaluate reliability of LASCA to measure peripheral blood perfusion in scleroderma patients.

PubMed

Cutolo, Maurizio; Vanhaecke, Amber; Ruaro, Barbara; Deschepper, Ellen; Ickinger, Claudia; Melsens, Karin; Piette, Yves; Trombetta, Amelia Chiara; De Keyser, Filip; Smith, Vanessa

2018-06-06

A reliable tool to evaluate flow is paramount in systemic sclerosis (SSc). We describe herein on the one hand a systematic literature review on the reliability of laser speckle contrast analysis (LASCA) to measure the peripheral blood perfusion (PBP) in SSc and perform an additional pilot study, investigating the intra- and inter-rater reliability of LASCA. A systematic search was performed in 3 electronic databases, according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. In the pilot study, 30 SSc patients and 30 healthy subjects (HS) underwent LASCA assessment. Intra-rater reliability was assessed by having a first anchor rater performing the measurements at 2 time-points and inter-rater reliability by having the anchor rater and a team of second raters performing the measurements in 15 SSc and 30 HS. The measurements were repeated with a second anchor rater in the other 15 SSc patients, as external validation. Only 1 of the 14 records of interest identified through the systematic search was included in the final analysis. In the additional pilot study: intra-class correlation coefficient (ICC) for intra-rater reliability of the first anchor rater was 0.95 in SSc and 0.93 in HS, the ICC for inter-rater reliability was 0.97 in SSc and 0.93 in HS. Intra- and inter-rater reliability of the second anchor rater was 0.78 and 0.87. The identified literature regarding the reliability of LASCA measurements reports good to excellent inter-rater agreement. This very pilot study could confirm the reliability of LASCA measurements with good to excellent inter-rater agreement and found additionally good to excellent intra-rater reliability. Furthermore, similar results were found in the external validation. Copyright © 2018. Published by Elsevier B.V.

Psychometric Properties of the Death Anxiety Scale-Extended among Patients with End-Stage Renal Disease.

PubMed

Sharif Nia, Hamid; Pahlevan Sharif, Saeed; Koocher, Gerald P; Yaghoobzadeh, Ameneh; Haghdoost, Ali Akbar; Mar Win, Ma Thin; Soleimani, Mohammad Ali

2017-01-01

This study aimed to evaluate the validity and reliability of the Persian version of Death Anxiety Scale-Extended (DAS-E). A total of 507 patients with end-stage renal disease completed the DAS-E. The factor structure of the scale was evaluated using exploratory factor analysis with an oblique rotation and confirmatory factor analysis. The content and construct validity of the DAS-E were assessed. Average variance extracted, maximum shared squared variance, and average shared squared variance were estimated to assess discriminant and convergent validity. Reliability was assessed using Cronbach's alpha coefficient (α = .839 and .831), composite reliability (CR = .845 and .832), Theta (θ = .893 and .867), and McDonald Omega (Ω = .796 and .743). The analysis indicated a two-factor solution. Reliability and discriminant validity of the factors was established. Findings revealed that the present scale was a valid and reliable instrument that can be used in assessment of death anxiety in Iranian patients with end-stage renal disease.

Graph Theoretical Analysis of Functional Brain Networks: Test-Retest Evaluation on Short- and Long-Term Resting-State Functional MRI Data

PubMed Central

Wang, Jin-Hui; Zuo, Xi-Nian; Gohel, Suril; Milham, Michael P.; Biswal, Bharat B.; He, Yong

2011-01-01

Graph-based computational network analysis has proven a powerful tool to quantitatively characterize functional architectures of the brain. However, the test-retest (TRT) reliability of graph metrics of functional networks has not been systematically examined. Here, we investigated TRT reliability of topological metrics of functional brain networks derived from resting-state functional magnetic resonance imaging data. Specifically, we evaluated both short-term (<1 hour apart) and long-term (>5 months apart) TRT reliability for 12 global and 6 local nodal network metrics. We found that reliability of global network metrics was overall low, threshold-sensitive and dependent on several factors of scanning time interval (TI, long-term>short-term), network membership (NM, networks excluding negative correlations>networks including negative correlations) and network type (NT, binarized networks>weighted networks). The dependence was modulated by another factor of node definition (ND) strategy. The local nodal reliability exhibited large variability across nodal metrics and a spatially heterogeneous distribution. Nodal degree was the most reliable metric and varied the least across the factors above. Hub regions in association and limbic/paralimbic cortices showed moderate TRT reliability. Importantly, nodal reliability was robust to above-mentioned four factors. Simulation analysis revealed that global network metrics were extremely sensitive (but varying degrees) to noise in functional connectivity and weighted networks generated numerically more reliable results in compared with binarized networks. For nodal network metrics, they showed high resistance to noise in functional connectivity and no NT related differences were found in the resistance. These findings provide important implications on how to choose reliable analytical schemes and network metrics of interest. PMID:21818285

Reliability analysis and initial requirements for FC systems and stacks

NASA Astrophysics Data System (ADS)

Åström, K.; Fontell, E.; Virtanen, S.

In the year 2000 Wärtsilä Corporation started an R&D program to develop SOFC systems for CHP applications. The program aims to bring to the market highly efficient, clean and cost competitive fuel cell systems with rated power output in the range of 50-250 kW for distributed generation and marine applications. In the program Wärtsilä focuses on system integration and development. System reliability and availability are key issues determining the competitiveness of the SOFC technology. In Wärtsilä, methods have been implemented for analysing the system in respect to reliability and safety as well as for defining reliability requirements for system components. A fault tree representation is used as the basis for reliability prediction analysis. A dynamic simulation technique has been developed to allow for non-static properties in the fault tree logic modelling. Special emphasis has been placed on reliability analysis of the fuel cell stacks in the system. A method for assessing reliability and critical failure predictability requirements for fuel cell stacks in a system consisting of several stacks has been developed. The method is based on a qualitative model of the stack configuration where each stack can be in a functional, partially failed or critically failed state, each of the states having different failure rates and effects on the system behaviour. The main purpose of the method is to understand the effect of stack reliability, critical failure predictability and operating strategy on the system reliability and availability. An example configuration, consisting of 5 × 5 stacks (series of 5 sets of 5 parallel stacks) is analysed in respect to stack reliability requirements as a function of predictability of critical failures and Weibull shape factor of failure rate distributions.

Research Review: Test-retest reliability of standardized diagnostic interviews to assess child and adolescent psychiatric disorders: a systematic review and meta-analysis.

PubMed

Duncan, Laura; Comeau, Jinette; Wang, Li; Vitoroulis, Irene; Boyle, Michael H; Bennett, Kathryn

2018-02-19

A better understanding of factors contributing to the observed variability in estimates of test-retest reliability in published studies on standardized diagnostic interviews (SDI) is needed. The objectives of this systematic review and meta-analysis were to estimate the pooled test-retest reliability for parent and youth assessments of seven common disorders, and to examine sources of between-study heterogeneity in reliability. Following a systematic review of the literature, multilevel random effects meta-analyses were used to analyse 202 reliability estimates (Cohen's kappa = ҡ) from 31 eligible studies and 5,369 assessments of 3,344 children and youth. Pooled reliability was moderate at ҡ = .58 (CI 95% 0.53-0.63) and between-study heterogeneity was substantial (Q = 2,063 (df = 201), p < .001 and I 2  = 79%). In subgroup analysis, reliability varied across informants for specific types of psychiatric disorder (ҡ = .53-.69 for parent vs. ҡ = .39-.68 for youth) with estimates significantly higher for parents on attention deficit hyperactivity disorder, oppositional defiant disorder and the broad groupings of externalizing and any disorder. Reliability was also significantly higher in studies with indicators of poor or fair study methodology quality (sample size <50, retest interval <7 days). Our findings raise important questions about the meaningfulness of published evidence on the test-retest reliability of SDIs and the usefulness of these tools in both clinical and research contexts. Potential remedies include the introduction of standardized study and reporting requirements for reliability studies, and exploration of other approaches to assessing and classifying child and adolescent psychiatric disorder. © 2018 Association for Child and Adolescent Mental Health.

Reliability and validity of CODA motion analysis system for measuring cervical range of motion in patients with cervical spondylosis and anterior cervical fusion.

PubMed

Gao, Zhongyang; Song, Hui; Ren, Fenggang; Li, Yuhuan; Wang, Dong; He, Xijing

2017-12-01

The aim of the present study was to evaluate the reliability of the Cartesian Optoelectronic Dynamic Anthropometer (CODA) motion system in measuring the cervical range of motion (ROM) and verify the construct validity of the CODA motion system. A total of 26 patients with cervical spondylosis and 22 patients with anterior cervical fusion were enrolled and the CODA motion analysis system was used to measure the three-dimensional cervical ROM. Intra- and inter-rater reliability was assessed by interclass correlation coefficients (ICCs), standard error of measurement (SEm), Limits of Agreements (LOA) and minimal detectable change (MDC). Independent samples t-tests were performed to examine the differences of cervical ROM between cervical spondylosis and anterior cervical fusion patients. The results revealed that in the cervical spondylosis group, the reliability was almost perfect (intra-rater reliability: ICC, 0.87-0.95; LOA, -12.86-13.70; SEm, 2.97-4.58; inter-rater reliability: ICC, 0.84-0.95; LOA, -13.09-13.48; SEm, 3.13-4.32). In the anterior cervical fusion group, the reliability was high (intra-rater reliability: ICC, 0.88-0.97; LOA, -10.65-11.08; SEm, 2.10-3.77; inter-rater reliability: ICC, 0.86-0.96; LOA, -10.91-13.66; SEm, 2.20-4.45). The cervical ROM in the cervical spondylosis group was significantly higher than that in the anterior cervical fusion group in all directions except for left rotation. In conclusion, the CODA motion analysis system is highly reliable in measuring cervical ROM and the construct validity was verified, as the system was sufficiently sensitive to distinguish between the cervical spondylosis and anterior cervical fusion groups based on their ROM.

Reliability analysis of airship remote sensing system

NASA Astrophysics Data System (ADS)

Qin, Jun

1998-08-01

Airship Remote Sensing System (ARSS) for obtain the dynamic or real time images in the remote sensing of the catastrophe and the environment, is a mixed complex system. Its sensor platform is a remote control airship. The achievement of a remote sensing mission depends on a series of factors. For this reason, it is very important for us to analyze reliability of ARSS. In first place, the system model was simplified form multi-stage system to two-state system on the basis of the result of the failure mode and effect analysis and the failure tree failure mode effect and criticality analysis. The failure tree was created after analyzing all factors and their interrelations. This failure tree includes four branches, e.g. engine subsystem, remote control subsystem, airship construction subsystem, flying metrology and climate subsystem. By way of failure tree analysis and basic-events classing, the weak links were discovered. The result of test running shown no difference in comparison with theory analysis. In accordance with the above conclusions, a plan of the reliability growth and reliability maintenance were posed. System's reliability are raised from 89 percent to 92 percent with the reformation of the man-machine interactive interface, the augmentation of the secondary better-groupie and the secondary remote control equipment.

Score Reliability: A Retrospective Look Back at 12 Years of Reliability Generalization Studies

ERIC Educational Resources Information Center

Vacha-Haase, Tammi; Thompson, Bruce

2011-01-01

The present study was conducted to characterize (a) the features of the thousands of primary reports synthesized in 47 reliability generalization (RG) measurement meta-analysis studies and (b) typical methodological practice within the RG literature to date. With respect to the treatment of score reliability in the literature, in an astounding…

Reliability analysis of interdependent lattices

NASA Astrophysics Data System (ADS)

Limiao, Zhang; Daqing, Li; Pengju, Qin; Bowen, Fu; Yinan, Jiang; Zio, Enrico; Rui, Kang

2016-06-01

Network reliability analysis has drawn much attention recently due to the risks of catastrophic damage in networked infrastructures. These infrastructures are dependent on each other as a result of various interactions. However, most of the reliability analyses of these interdependent networks do not consider spatial constraints, which are found important for robustness of infrastructures including power grid and transport systems. Here we study the reliability properties of interdependent lattices with different ranges of spatial constraints. Our study shows that interdependent lattices with strong spatial constraints are more resilient than interdependent Erdös-Rényi networks. There exists an intermediate range of spatial constraints, at which the interdependent lattices have minimal resilience.

Confirmatory Factor Analysis and Test-Retest Reliability of the Alcohol and Drug Confrontation Scale (ADCS)

PubMed Central

Polcin, Douglas L.; Galloway, Gantt P.; Bond, Jason; Korcha, Rachael; Greenfield, Thomas K.

2008-01-01

The addiction field lacks an accepted definition and reliable measure of confrontation. The Alcohol and Drug Confrontation Scale (ADCS) defines confrontation as warnings about the potential consequences of substance use. To assess psychometric properties, 323 individual entering recovery houses in U.S. urban and suburban areas were interviewed between 2003 and 2005 (20% women, 68% white). Analyses included test-retest reliability, confirmatory factor analysis, and measures of internal consistency. Findings support the ADCS as a reliable way of assessing two factors: Internal Support and External intensity. Confrontation was experienced as supportive, accurate and helpful. Additional studies should assess confrontation in different contexts. PMID:20686635

Inspection planning development: An evolutionary approach using reliability engineering as a tool

NASA Technical Reports Server (NTRS)

Graf, David A.; Huang, Zhaofeng

1994-01-01

This paper proposes an evolutionary approach for inspection planning which introduces various reliability engineering tools into the process and assess system trade-offs among reliability, engineering requirement, manufacturing capability and inspection cost to establish an optimal inspection plan. The examples presented in the paper illustrate some advantages and benefits of the new approach. Through the analysis, reliability and engineering impacts due to manufacturing process capability and inspection uncertainty are clearly understood; the most cost effective and efficient inspection plan can be established and associated risks are well controlled; some inspection reductions and relaxations are well justified; and design feedbacks and changes may be initiated from the analysis conclusion to further enhance reliability and reduce cost. The approach is particularly promising as global competitions and customer quality improvement expectations are rapidly increasing.

Accuracy and reliability of observational gait analysis data: judgments of push-off in gait after stroke.

PubMed

McGinley, Jennifer L; Goldie, Patricia A; Greenwood, Kenneth M; Olney, Sandra J

2003-02-01

Physical therapists routinely observe gait in clinical practice. The purpose of this study was to determine the accuracy and reliability of observational assessments of push-off in gait after stroke. Eighteen physical therapists and 11 subjects with hemiplegia following a stroke participated in the study. Measurements of ankle power generation were obtained from subjects following stroke using a gait analysis system. Concurrent videotaped gait performances were observed by the physical therapists on 2 occasions. Ankle power generation at push-off was scored as either normal or abnormal using two 11-point rating scales. These observational ratings were correlated with the measurements of peak ankle power generation. A high correlation was obtained between the observational ratings and the measurements of ankle power generation (mean Pearson r=.84). Interobserver reliability was moderately high (mean intraclass correlation coefficient [ICC (2,1)]=.76). Intraobserver reliability also was high, with a mean ICC (2,1) of.89 obtained. Physical therapists were able to make accurate and reliable judgments of push-off in videotaped gait of subjects following stroke using observational assessment. Further research is indicated to explore the accuracy and reliability of data obtained with observational gait analysis as it occurs in clinical practice.

Reliability and Validity of the Italian Version of the Protocol of Orofacial Myofunctional Evaluation with Scores (I-OMES).

PubMed

Scarponi, Letizia; de Felicio, Claudia Maria; Sforza, Chiarella; Pimenta Ferreira, Claudia Lucia; Ginocchio, Daniela; Pizzorni, Nicole; Barozzi, Stefania; Mozzanica, Francesco; Schindler, Antonio

2018-05-30

To evaluate the reliability, validity, and responsiveness of the Italian OMES (I-OMES). The study consisted of 3 phases: (1) internal consistency and reliability, (2) validity, and (3) responsiveness analysis. The recruited population included 27 patients with orofacial myofunctional disorders (OMD) and 174 healthy volunteers. Forty-seven subjects, 18 healthy and all recruited patients with OMD were assessed for inter-rater and test-retest reliability analysis. I-OMES and Nordic Orofacial Test - Screening (NOT-S) scores of the patients were correlated for concurrent validity analysis. I-OMES scores from 27 patients with OMD and 27 age- and gender-matched healthy subjects were compared to investigate construct validity. I-OMES scores before and after successful swallowing rehabilitation in patients were compared for responsiveness analysis. Adequate internal consistency (Cronbach α = 0.71) and strong inter-rater and test-retest reliability (intraclass coefficient correlation = 0.97 and 0.98, respectively) were found. I-OMES and NOT-S scores significantly and inversely correlated (r = -0.38). A statistical significance (p < 0.001) was found between the pathological group and the control group for the total I-OMES score. The mean I-OMES score improved from 90 (78-102) to 99 (89-103) after myofunctional rehabilitation (p < 0.001). The I-OMES is a reliable and valid tool to evaluate OMD. © 2018 S. Karger AG, Basel.

Subject-level reliability analysis of fast fMRI with application to epilepsy.

PubMed

Hao, Yongfu; Khoo, Hui Ming; von Ellenrieder, Nicolas; Gotman, Jean

2017-07-01

Recent studies have applied the new magnetic resonance encephalography (MREG) sequence to the study of interictal epileptic discharges (IEDs) in the electroencephalogram (EEG) of epileptic patients. However, there are no criteria to quantitatively evaluate different processing methods, to properly use the new sequence. We evaluated different processing steps of this new sequence under the common generalized linear model (GLM) framework by assessing the reliability of results. A bootstrap sampling technique was first used to generate multiple replicated data sets; a GLM with different processing steps was then applied to obtain activation maps, and the reliability of these maps was assessed. We applied our analysis in an event-related GLM related to IEDs. A higher reliability was achieved by using a GLM with head motion confound regressor with 24 components rather than the usual 6, with an autoregressive model of order 5 and with a canonical hemodynamic response function (HRF) rather than variable latency or patient-specific HRFs. Comparison of activation with IED field also favored the canonical HRF, consistent with the reliability analysis. The reliability analysis helps to optimize the processing methods for this fast fMRI sequence, in a context in which we do not know the ground truth of activation areas. Magn Reson Med 78:370-382, 2017. © 2016 International Society for Magnetic Resonance in Medicine. © 2016 International Society for Magnetic Resonance in Medicine.

CARES/LIFE Ceramics Analysis and Reliability Evaluation of Structures Life Prediction Program

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Powers, Lynn M.; Janosik, Lesley A.; Gyekenyesi, John P.

2003-01-01

This manual describes the Ceramics Analysis and Reliability Evaluation of Structures Life Prediction (CARES/LIFE) computer program. The program calculates the time-dependent reliability of monolithic ceramic components subjected to thermomechanical and/or proof test loading. CARES/LIFE is an extension of the CARES (Ceramic Analysis and Reliability Evaluation of Structures) computer program. The program uses results from MSC/NASTRAN, ABAQUS, and ANSYS finite element analysis programs to evaluate component reliability due to inherent surface and/or volume type flaws. CARES/LIFE accounts for the phenomenon of subcritical crack growth (SCG) by utilizing the power law, Paris law, or Walker law. The two-parameter Weibull cumulative distribution function is used to characterize the variation in component strength. The effects of multiaxial stresses are modeled by using either the principle of independent action (PIA), the Weibull normal stress averaging method (NSA), or the Batdorf theory. Inert strength and fatigue parameters are estimated from rupture strength data of naturally flawed specimens loaded in static, dynamic, or cyclic fatigue. The probabilistic time-dependent theories used in CARES/LIFE, along with the input and output for CARES/LIFE, are described. Example problems to demonstrate various features of the program are also included.

Interrater reliability of schizoaffective disorder compared with schizophrenia, bipolar disorder, and unipolar depression - A systematic review and meta-analysis.

PubMed

Santelmann, Hanno; Franklin, Jeremy; Bußhoff, Jana; Baethge, Christopher

2016-10-01

Schizoaffective disorder is a common diagnosis in clinical practice but its nosological status has been subject to debate ever since it was conceptualized. Although it is key that diagnostic reliability is sufficient, schizoaffective disorder has been reported to have low interrater reliability. Evidence based on systematic review and meta-analysis methods, however, is lacking. Using a highly sensitive literature search in Medline, Embase, and PsycInfo we identified studies measuring the interrater reliability of schizoaffective disorder in comparison to schizophrenia, bipolar disorder, and unipolar disorder. Out of 4126 records screened we included 25 studies reporting on 7912 patients diagnosed by different raters. The interrater reliability of schizoaffective disorder was moderate (meta-analytic estimate of Cohen's kappa 0.57 [95% CI: 0.41-0.73]), and substantially lower than that of its main differential diagnoses (difference in kappa between 0.22 and 0.19). Although there was considerable heterogeneity, analyses revealed that the interrater reliability of schizoaffective disorder was consistently lower in the overwhelming majority of studies. The results remained robust in subgroup and sensitivity analyses (e.g., diagnostic manual used) as well as in meta-regressions (e.g., publication year) and analyses of publication bias. Clinically, the results highlight the particular importance of diagnostic re-evaluation in patients diagnosed with schizoaffective disorder. They also quantify a widely held clinical impression of lower interrater reliability and agree with earlier meta-analysis reporting low test-retest reliability. Copyright © 2016. Published by Elsevier B.V.

Psychometric evaluation of the Persian version of the Templer's Death Anxiety Scale in cancer patients.

PubMed

Soleimani, Mohammad Ali; Yaghoobzadeh, Ameneh; Bahrami, Nasim; Sharif, Saeed Pahlevan; Sharif Nia, Hamid

2016-10-01

In this study, 398 Iranian cancer patients completed the 15-item Templer's Death Anxiety Scale (TDAS). Tests of internal consistency, principal components analysis, and confirmatory factor analysis were conducted to assess the internal consistency and factorial validity of the Persian TDAS. The construct reliability statistic and average variance extracted were also calculated to measure construct reliability, convergent validity, and discriminant validity. Principal components analysis indicated a 3-component solution, which was generally supported in the confirmatory analysis. However, acceptable cutoffs for construct reliability, convergent validity, and discriminant validity were not fulfilled for the three subscales that were derived from the principal component analysis. This study demonstrated both the advantages and potential limitations of using the TDAS with Persian-speaking cancer patients.

Recent developments of the NESSUS probabilistic structural analysis computer program

NASA Technical Reports Server (NTRS)

Millwater, H.; Wu, Y.-T.; Torng, T.; Thacker, B.; Riha, D.; Leung, C. P.

1992-01-01

The NESSUS probabilistic structural analysis computer program combines state-of-the-art probabilistic algorithms with general purpose structural analysis methods to compute the probabilistic response and the reliability of engineering structures. Uncertainty in loading, material properties, geometry, boundary conditions and initial conditions can be simulated. The structural analysis methods include nonlinear finite element and boundary element methods. Several probabilistic algorithms are available such as the advanced mean value method and the adaptive importance sampling method. The scope of the code has recently been expanded to include probabilistic life and fatigue prediction of structures in terms of component and system reliability and risk analysis of structures considering cost of failure. The code is currently being extended to structural reliability considering progressive crack propagation. Several examples are presented to demonstrate the new capabilities.

Reliability Assessment for Low-cost Unmanned Aerial Vehicles

NASA Astrophysics Data System (ADS)

Freeman, Paul Michael

Existing low-cost unmanned aerospace systems are unreliable, and engineers must blend reliability analysis with fault-tolerant control in novel ways. This dissertation introduces the University of Minnesota unmanned aerial vehicle flight research platform, a comprehensive simulation and flight test facility for reliability and fault-tolerance research. An industry-standard reliability assessment technique, the failure modes and effects analysis, is performed for an unmanned aircraft. Particular attention is afforded to the control surface and servo-actuation subsystem. Maintaining effector health is essential for safe flight; failures may lead to loss of control incidents. Failure likelihood, severity, and risk are qualitatively assessed for several effector failure modes. Design changes are recommended to improve aircraft reliability based on this analysis. Most notably, the control surfaces are split, providing independent actuation and dual-redundancy. The simulation models for control surface aerodynamic effects are updated to reflect the split surfaces using a first-principles geometric analysis. The failure modes and effects analysis is extended by using a high-fidelity nonlinear aircraft simulation. A trim state discovery is performed to identify the achievable steady, wings-level flight envelope of the healthy and damaged vehicle. Tolerance of elevator actuator failures is studied using familiar tools from linear systems analysis. This analysis reveals significant inherent performance limitations for candidate adaptive/reconfigurable control algorithms used for the vehicle. Moreover, it demonstrates how these tools can be applied in a design feedback loop to make safety-critical unmanned systems more reliable. Control surface impairments that do occur must be quickly and accurately detected. This dissertation also considers fault detection and identification for an unmanned aerial vehicle using model-based and model-free approaches and applies those algorithms to experimental faulted and unfaulted flight test data. Flight tests are conducted with actuator faults that affect the plant input and sensor faults that affect the vehicle state measurements. A model-based detection strategy is designed and uses robust linear filtering methods to reject exogenous disturbances, e.g. wind, while providing robustness to model variation. A data-driven algorithm is developed to operate exclusively on raw flight test data without physical model knowledge. The fault detection and identification performance of these complementary but different methods is compared. Together, enhanced reliability assessment and multi-pronged fault detection and identification techniques can help to bring about the next generation of reliable low-cost unmanned aircraft.

Field reliability of competency and sanity opinions: A systematic review and meta-analysis.

PubMed

Guarnera, Lucy A; Murrie, Daniel C

2017-06-01

We know surprisingly little about the interrater reliability of forensic psychological opinions, even though courts and other authorities have long called for known error rates for scientific procedures admitted as courtroom testimony. This is particularly true for opinions produced during routine practice in the field, even for some of the most common types of forensic evaluations-evaluations of adjudicative competency and legal sanity. To address this gap, we used meta-analytic procedures and study space methodology to systematically review studies that examined the interrater reliability-particularly the field reliability-of competency and sanity opinions. Of 59 identified studies, 9 addressed the field reliability of competency opinions and 8 addressed the field reliability of sanity opinions. These studies presented a wide range of reliability estimates; pairwise percentage agreements ranged from 57% to 100% and kappas ranged from .28 to 1.0. Meta-analytic combinations of reliability estimates obtained by independent evaluators returned estimates of κ = .49 (95% CI: .40-.58) for competency opinions and κ = .41 (95% CI: .29-.53) for sanity opinions. This wide range of reliability estimates underscores the extent to which different evaluation contexts tend to produce different reliability rates. Unfortunately, our study space analysis illustrates that available field reliability studies typically provide little information about contextual variables crucial to understanding their findings. Given these concerns, we offer suggestions for improving research on the field reliability of competency and sanity opinions, as well as suggestions for improving reliability rates themselves. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Failure mode analysis to predict product reliability.

NASA Technical Reports Server (NTRS)

Zemanick, P. P.

1972-01-01

The failure mode analysis (FMA) is described as a design tool to predict and improve product reliability. The objectives of the failure mode analysis are presented as they influence component design, configuration selection, the product test program, the quality assurance plan, and engineering analysis priorities. The detailed mechanics of performing a failure mode analysis are discussed, including one suggested format. Some practical difficulties of implementation are indicated, drawn from experience with preparing FMAs on the nuclear rocket engine program.

Measurement of fetal head descent using the 'angle of progression' on transperineal ultrasound imaging is reliable regardless of fetal head station or ultrasound expertise.

PubMed

Dückelmann, A M; Bamberg, C; Michaelis, S A M; Lange, J; Nonnenmacher, A; Dudenhausen, J W; Kalache, K D

2010-02-01

To assess whether ultrasound experience or fetal head station affects the reliability of measurement of fetal head descent using the angle of progression on intrapartum ultrasound images obtained by a single experienced operator, and to determine reliability of measurements when images were acquired by different operators with variable ultrasound experience. One experienced obstetrician performed 44 transperineal ultrasound examinations of women at term and in prolonged second stage of labor with the fetus in the occipitoanterior position. Three midwives without ultrasound experience, three obstetricians with < 5 years' experience and three obstetricians with > 10 years' experience measured fetal head descent based on the angle of progression in the images obtained. The angle of progression was measured by two obstetricians in independent ultrasound examinations of 24 laboring women at term with the fetus in the cephalic position to allow assessment of the reliability of image acquisition. Intraclass correlation coefficients (ICCs) with 95% confidence interval (CI) were used to evaluate interobserver reliability and Bland-Altman analysis was used to assess interobserver agreement. In total, 444 measurements were performed and compared. Interobserver reliability with respect to offline image analysis was substantial (overall ICC, 0.72; 95% CI, 0.63-0.81). ICCs were 0.82 (95% CI, 0.70-0.89), 0.81 (95% CI, 0.71-0.88) and 0.61 (95% CI, 0.43-074) for observers with > 10 years', < 5 years' and no ultrasound experience, respectively. There were no significant differences between ICCs among observer groups according to ultrasound experience. Fetal head station did not affect reliability. Bland-Altman analysis indicated reasonable agreement between measurements obtained by two different operators with > 10 years' and < 5 years' ultrasound experience (bias, -1.09 degrees ; 95% limits of agreement, -8.76 to 6.58). The reliability of measurement of the angle of progression following separate image acquisition by two experienced operators was similar to the reliability of offline image analysis (ICC, 0.86; 95% CI, 0.70-0.93). Measurement of the angle of progression on transperineal ultrasound imaging is reliable regardless of fetal head station or the clinician's level of ultrasound experience.

Meta-Analysis of Coefficient Alpha

ERIC Educational Resources Information Center

Rodriguez, Michael C.; Maeda, Yukiko

2006-01-01

The meta-analysis of coefficient alpha across many studies is becoming more common in psychology by a methodology labeled reliability generalization. Existing reliability generalization studies have not used the sampling distribution of coefficient alpha for precision weighting and other common meta-analytic procedures. A framework is provided for…

A New Tool for Nutrition App Quality Evaluation (AQEL): Development, Validation, and Reliability Testing

PubMed Central

Huang, Wenhao; Chapman-Novakofski, Karen M

2017-01-01

Background The extensive availability and increasing use of mobile apps for nutrition-based health interventions makes evaluation of the quality of these apps crucial for integration of apps into nutritional counseling. Objective The goal of this research was the development, validation, and reliability testing of the app quality evaluation (AQEL) tool, an instrument for evaluating apps’ educational quality and technical functionality. Methods Items for evaluating app quality were adapted from website evaluations, with additional items added to evaluate the specific characteristics of apps, resulting in 79 initial items. Expert panels of nutrition and technology professionals and app users reviewed items for face and content validation. After recommended revisions, nutrition experts completed a second AQEL review to ensure clarity. On the basis of 150 sets of responses using the revised AQEL, principal component analysis was completed, reducing AQEL into 5 factors that underwent reliability testing, including internal consistency, split-half reliability, test-retest reliability, and interrater reliability (IRR). Two additional modifiable constructs for evaluating apps based on the age and needs of the target audience as selected by the evaluator were also tested for construct reliability. IRR testing using intraclass correlations (ICC) with all 7 constructs was conducted, with 15 dietitians evaluating one app. Results Development and validation resulted in the 51-item AQEL. These were reduced to 25 items in 5 factors after principal component analysis, plus 9 modifiable items in two constructs that were not included in principal component analysis. Internal consistency and split-half reliability of the following constructs derived from principal components analysis was good (Cronbach alpha >.80, Spearman-Brown coefficient >.80): behavior change potential, support of knowledge acquisition, app function, and skill development. App purpose split half-reliability was .65. Test-retest reliability showed no significant change over time (P>.05) for all but skill development (P=.001). Construct reliability was good for items assessing age appropriateness of apps for children, teens, and a general audience. In addition, construct reliability was acceptable for assessing app appropriateness for various target audiences (Cronbach alpha >.70). For the 5 main factors, ICC (1,k) was >.80, with a P value of <.05. When 15 nutrition professionals evaluated one app, ICC (2,15) was .98, with a P value of <.001 for all 7 constructs when the modifiable items were specified for adults seeking weight loss support. Conclusions Our preliminary effort shows that AQEL is a valid, reliable instrument for evaluating nutrition apps’ qualities for clinical interventions by nutrition clinicians, educators, and researchers. Further efforts in validating AQEL in various contexts are needed. PMID:29079554

[Systematic umbilical cord blood analysis at birth: feasibility and reliability in a French labour ward].

PubMed

Ernst, D; Clerc, J; Decullier, E; Gavanier, G; Dupuis, O

2012-10-01

At birth, evaluation of neonatal well-being is crucial. It is though important to perform umbilical cord blood gas analysis, and then to analyze the samples. We wanted to establish the feasibility and reliability of systematic umbilical cord blood sampling in a French labour ward. Study of systematic umbilical cord blood gas analysis was realized retrospectively from 1000 consecutive deliveries. We first established the feasibility of the samples. Feasibility was defined by the ratio of complete cord acid-base data on the number of deliveries from alive newborns. Afterwards, we established the reliability on the remaining cord samples. Reliability was the ratio of samples that fulfilled quality criteria defined by Westgate et al. and revised by Kro et al., on the number of complete samples from alive newborns. At last, we looked for factors that would influence these results. The systematic umbilical cord blood sample feasibility reached 91.6%, and the reliability reached 80.7%. About the delivery mode, 38.6% of emergency caesarians (IC 95% [30.8-46.3]; P<0.0001) led to non-valid samples, when only 11.3% of programmed caesarians (IC 95% [4.3-18.2]; P<0.0001) led to non-valid samples. Umbilical cord blood analysis were significantly less validated during emergency caesarians. Realization of systematic cord blood gas analysis was followed by 8.4% of incomplete samples, and by 19.3% that were uninterpretable. Training sessions should be organized to improve the feasibility and reliability, especially during emergency caesarians. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

A reliability analysis of the revised competitiveness index.

PubMed

Harris, Paul B; Houston, John M

2010-06-01

This study examined the reliability of the Revised Competitiveness Index by investigating the test-retest reliability, interitem reliability, and factor structure of the measure based on a sample of 280 undergraduates (200 women, 80 men) ranging in age from 18 to 28 years (M = 20.1, SD = 2.1). The findings indicate that the Revised Competitiveness Index has high test-retest reliability, high inter-item reliability, and a stable factor structure. The results support the assertion that the Revised Competitiveness Index assesses competitiveness as a stable trait rather than a dynamic state.

Reliability Abstracts and Technical Reviews January - December 1970. Volume 10, Nos. 1-12; R70-14805 - R70-15438

NASA Technical Reports Server (NTRS)

1970-01-01

Reliability Abstracts and Technical Reviews is an abstract and critical analysis service covering published and report literature on reliability. The service is designed to provide information on theory and practice of reliability as applied to aerospace and an objective appraisal of the quality, significance, and applicability of the literature abstracted.

Structural reliability assessment capability in NESSUS

NASA Technical Reports Server (NTRS)

Millwater, H.; Wu, Y.-T.

1992-01-01

The principal capabilities of NESSUS (Numerical Evaluation of Stochastic Structures Under Stress), an advanced computer code developed for probabilistic structural response analysis, are reviewed, and its structural reliability assessed. The code combines flexible structural modeling tools with advanced probabilistic algorithms in order to compute probabilistic structural response and resistance, component reliability and risk, and system reliability and risk. An illustrative numerical example is presented.

Structural reliability assessment capability in NESSUS

NASA Astrophysics Data System (ADS)

Millwater, H.; Wu, Y.-T.

1992-07-01

The principal capabilities of NESSUS (Numerical Evaluation of Stochastic Structures Under Stress), an advanced computer code developed for probabilistic structural response analysis, are reviewed, and its structural reliability assessed. The code combines flexible structural modeling tools with advanced probabilistic algorithms in order to compute probabilistic structural response and resistance, component reliability and risk, and system reliability and risk. An illustrative numerical example is presented.

A reliability study of the new sensors for movement analysis (SHARIF-HMIS).

PubMed

Abedi, Mohen; Manshadi, Farideh Dehghan; Zavieh, Minoo Khalkhali; Ashouri, Sajad; Azimi, Hadi; Parnanpour, Mohamad

2016-04-01

SHARIF-HMIS is a new inertial sensor designed for movement analysis. The aim of the present study was to assess the inter-tester and intra-tester reliability of some kinematic parameters in different lumbar motions making use of this sensor. 24 healthy persons and 28 patients with low back pain participated in the current reliability study. The test was performed in five different lumbar motions consisting of lumbar flexion in 0, 15, and 30° in the right and left directions. For measuring inter-tester reliability, all the tests were carried out twice on the same day separately by two physiotherapists. Intra-tester reliability was assessed by reproducing the tests after 3 days by the same physiotherapist. The present study revealed satisfactory inter- and intra-tester reliability indices in different positions. ICCs for intra-tester reliability ranged from 0.65 to 0.98 and 0.59 to 0.81 for healthy and patient participants, respectively. Also, ICCs for inter-tester reliability ranged from 0.65 to 0.92 for the healthy and 0.65 to 0.87 for patient participants. In general, it can be inferred from the results that measuring the kinematic parameters in lumbar movements using inertial sensors enjoys acceptable reliability. Copyright © 2015 Elsevier Ltd. All rights reserved.

Approximation Model Building for Reliability & Maintainability Characteristics of Reusable Launch Vehicles

NASA Technical Reports Server (NTRS)

Unal, Resit; Morris, W. Douglas; White, Nancy H.; Lepsch, Roger A.; Brown, Richard W.

2000-01-01

This paper describes the development of parametric models for estimating operational reliability and maintainability (R&M) characteristics for reusable vehicle concepts, based on vehicle size and technology support level. A R&M analysis tool (RMAT) and response surface methods are utilized to build parametric approximation models for rapidly estimating operational R&M characteristics such as mission completion reliability. These models that approximate RMAT, can then be utilized for fast analysis of operational requirements, for lifecycle cost estimating and for multidisciplinary sign optimization.

Combining System Safety and Reliability to Ensure NASA CoNNeCT's Success

NASA Technical Reports Server (NTRS)

Havenhill, Maria; Fernandez, Rene; Zampino, Edward

2012-01-01

Hazard Analysis, Failure Modes and Effects Analysis (FMEA), the Limited-Life Items List (LLIL), and the Single Point Failure (SPF) List were applied by System Safety and Reliability engineers on NASA's Communications, Navigation, and Networking reConfigurable Testbed (CoNNeCT) Project. The integrated approach involving cross reviews of these reports by System Safety, Reliability, and Design engineers resulted in the mitigation of all identified hazards. The outcome was that the system met all the safety requirements it was required to meet.

The Reliability Mandate: Optimizing the Use of Highly Reliable Parts, Materials, and Processes (PM&P) to Maximize System Component Reliability in the Life Cycle

DTIC Science & Technology

2002-06-01

projects are converted into bricks and mortar , as Figure 5 illustrates. Making major changes in LCC after projects are turned over to production is...matter experts ( SMEs ) in the parts, materials, and processes functional area. Data gathering and analysis were conducted through structured interviews...The analysis synthesized feedback and searched for collective issues from the various SMEs on managing PM&P Program requirements, the

Structural system reliability calculation using a probabilistic fault tree analysis method

NASA Technical Reports Server (NTRS)

Torng, T. Y.; Wu, Y.-T.; Millwater, H. R.

1992-01-01

The development of a new probabilistic fault tree analysis (PFTA) method for calculating structural system reliability is summarized. The proposed PFTA procedure includes: developing a fault tree to represent the complex structural system, constructing an approximation function for each bottom event, determining a dominant sampling sequence for all bottom events, and calculating the system reliability using an adaptive importance sampling method. PFTA is suitable for complicated structural problems that require computer-intensive computer calculations. A computer program has been developed to implement the PFTA.

Reliability in Cross-National Content Analysis.

ERIC Educational Resources Information Center

Peter, Jochen; Lauf, Edmund

2002-01-01

Investigates how coder characteristics such as language skills, political knowledge, coding experience, and coding certainty affected inter-coder and coder-training reliability. Shows that language skills influenced both reliability types. Suggests that cross-national researchers should pay more attention to cross-national assessments of…

Structure reliability design and analysis of support ring for cylinder seal

NASA Astrophysics Data System (ADS)

Minmin, Zhao

2017-09-01

In this paper, the general reliability design process of the cross-sectional dimension of the support ring is introduced, which is used for the cylinder sealing. Then, taking a certain section shape support ring as an example, the every size parameters of section are determined from the view point of reliability design. Last, the static strength and reliability of the support ring are analyzed to verify the correctness of the reliability design result.

Reliability and validity of the revised Gibson Test of Cognitive Skills, a computer-based test battery for assessing cognition across the lifespan.

PubMed

Moore, Amy Lawson; Miller, Terissa M

2018-01-01

The purpose of the current study is to evaluate the validity and reliability of the revised Gibson Test of Cognitive Skills, a computer-based battery of tests measuring short-term memory, long-term memory, processing speed, logic and reasoning, visual processing, as well as auditory processing and word attack skills. This study included 2,737 participants aged 5-85 years. A series of studies was conducted to examine the validity and reliability using the test performance of the entire norming group and several subgroups. The evaluation of the technical properties of the test battery included content validation by subject matter experts, item analysis and coefficient alpha, test-retest reliability, split-half reliability, and analysis of concurrent validity with the Woodcock Johnson III Tests of Cognitive Abilities and Tests of Achievement. Results indicated strong sources of evidence of validity and reliability for the test, including internal consistency reliability coefficients ranging from 0.87 to 0.98, test-retest reliability coefficients ranging from 0.69 to 0.91, split-half reliability coefficients ranging from 0.87 to 0.91, and concurrent validity coefficients ranging from 0.53 to 0.93. The Gibson Test of Cognitive Skills-2 is a reliable and valid tool for assessing cognition in the general population across the lifespan.

Structural reliability analysis under evidence theory using the active learning kriging model

NASA Astrophysics Data System (ADS)

Yang, Xufeng; Liu, Yongshou; Ma, Panke

2017-11-01

Structural reliability analysis under evidence theory is investigated. It is rigorously proved that a surrogate model providing only correct sign prediction of the performance function can meet the accuracy requirement of evidence-theory-based reliability analysis. Accordingly, a method based on the active learning kriging model which only correctly predicts the sign of the performance function is proposed. Interval Monte Carlo simulation and a modified optimization method based on Karush-Kuhn-Tucker conditions are introduced to make the method more efficient in estimating the bounds of failure probability based on the kriging model. Four examples are investigated to demonstrate the efficiency and accuracy of the proposed method.

Rater reliability and concurrent validity of the Keyboard Personal Computer Style instrument (K-PeCS).

PubMed

Baker, Nancy A; Cook, James R; Redfern, Mark S

2009-01-01

This paper describes the inter-rater and intra-rater reliability, and the concurrent validity of an observational instrument, the Keyboard Personal Computer Style instrument (K-PeCS), which assesses stereotypical postures and movements associated with computer keyboard use. Three trained raters independently rated the video clips of 45 computer keyboard users to ascertain inter-rater reliability, and then re-rated a sub-sample of 15 video clips to ascertain intra-rater reliability. Concurrent validity was assessed by comparing the ratings obtained using the K-PeCS to scores developed from a 3D motion analysis system. The overall K-PeCS had excellent reliability [inter-rater: intra-class correlation coefficients (ICC)=.90; intra-rater: ICC=.92]. Most individual items on the K-PeCS had from good to excellent reliability, although six items fell below ICC=.75. Those K-PeCS items that were assessed for concurrent validity compared favorably to the motion analysis data for all but two items. These results suggest that most items on the K-PeCS can be used to reliably document computer keyboarding style.

Emulation applied to reliability analysis of reconfigurable, highly reliable, fault-tolerant computing systems

NASA Technical Reports Server (NTRS)

Migneault, G. E.

1979-01-01

Emulation techniques applied to the analysis of the reliability of highly reliable computer systems for future commercial aircraft are described. The lack of credible precision in reliability estimates obtained by analytical modeling techniques is first established. The difficulty is shown to be an unavoidable consequence of: (1) a high reliability requirement so demanding as to make system evaluation by use testing infeasible; (2) a complex system design technique, fault tolerance; (3) system reliability dominated by errors due to flaws in the system definition; and (4) elaborate analytical modeling techniques whose precision outputs are quite sensitive to errors of approximation in their input data. Next, the technique of emulation is described, indicating how its input is a simple description of the logical structure of a system and its output is the consequent behavior. Use of emulation techniques is discussed for pseudo-testing systems to evaluate bounds on the parameter values needed for the analytical techniques. Finally an illustrative example is presented to demonstrate from actual use the promise of the proposed application of emulation.

Portfolio assessment during medical internships: How to obtain a reliable and feasible assessment procedure?

PubMed

Michels, Nele R M; Driessen, Erik W; Muijtjens, Arno M M; Van Gaal, Luc F; Bossaert, Leo L; De Winter, Benedicte Y

2009-12-01

A portfolio is used to mentor and assess students' clinical performance at the workplace. However, students and raters often perceive the portfolio as a time-consuming instrument. In this study, we investigated whether assessment during medical internship by a portfolio can combine reliability and feasibility. The domain-oriented reliability of 61 double-rated portfolios was measured, using a generalisability analysis with portfolio tasks and raters as sources of variation in measuring the performance of a student. We obtained reliability (Phi coefficient) of 0.87 with this internship portfolio containing 15 double-rated tasks. The generalisability analysis showed that an acceptable level of reliability (Phi = 0.80) was maintained when the amount of portfolio tasks was decreased to 13 or 9 using one and two raters, respectively. Our study shows that a portfolio can be a reliable method for the assessment of workplace learning. The possibility of reducing the amount of tasks or raters while maintaining a sufficient level of reliability suggests an increase in feasibility of portfolio use for both students and raters.

Protocol for a qualitative study exploring perspectives on the INternational CLassification of Diseases (11th revision); Using lived experience to improve mental health Diagnosis in NHS England: INCLUDE study

PubMed Central

Hackmann, Corinna; Green, Amanda; Notley, Caitlin; Perkins, Amorette; Reed, Geoffrey M; Ridler, Joseph; Wilson, Jon; Shakespeare, Tom

2017-01-01

Introduction Developed in dialogue with WHO, this research aims to incorporate lived experience and views in the refinement of the International Classification of Diseases Mental and Behavioural Disorders 11th Revision (ICD-11). The validity and clinical utility of psychiatric diagnostic systems has been questioned by both service users and clinicians, as not all aspects reflect their lived experience or are user friendly. This is critical as evidence suggests that diagnosis can impact service user experience, identity, service use and outcomes. Feedback and recommendations from service users and clinicians should help minimise the potential for unintended negative consequences and improve the accuracy, validity and clinical utility of the ICD-11. Methods and analysis The name INCLUDE reflects the value of expertise by experience as all aspects of the proposed study are co-produced. Feedback on the planned criteria for the ICD-11 will be sought through focus groups with service users and clinicians. The data from these groups will be coded and inductively analysed using a thematic analysis approach. Findings from this will be used to form the basis of co-produced recommendations for the ICD-11. Two service user focus groups will be conducted for each of these diagnoses: Personality Disorder, Bipolar I Disorder, Schizophrenia, Depressive Disorder and Generalised Anxiety Disorder. There will be four focus groups with clinicians (psychiatrists, general practitioners and clinical psychologists). Ethics and dissemination This study has received ethical approval from the Coventry and Warwickshire HRA Research Ethics Committee (16/WM/0479). The output for the project will be recommendations that reflect the views and experiences of experts by experience (service users and clinicians). The findings will be disseminated via conferences and peer-reviewed publications. As the ICD is an international tool, the aim is for the methodology to be internationally disseminated for replication by other groups. Trial registration number ClinicalTrials.gov: NCT03131505. PMID:28871029

The Berg Balance Scale has high intra- and inter-rater reliability but absolute reliability varies across the scale: a systematic review.

PubMed

Downs, Stephen; Marquez, Jodie; Chiarelli, Pauline

2013-06-01

What is the intra-rater and inter-rater relative reliability of the Berg Balance Scale? What is the absolute reliability of the Berg Balance Scale? Does the absolute reliability of the Berg Balance Scale vary across the scale? Systematic review with meta-analysis of reliability studies. Any clinical population that has undergone assessment with the Berg Balance Scale. Relative intra-rater reliability, relative inter-rater reliability, and absolute reliability. Eleven studies involving 668 participants were included in the review. The relative intrarater reliability of the Berg Balance Scale was high, with a pooled estimate of 0.98 (95% CI 0.97 to 0.99). Relative inter-rater reliability was also high, with a pooled estimate of 0.97 (95% CI 0.96 to 0.98). A ceiling effect of the Berg Balance Scale was evident for some participants. In the analysis of absolute reliability, all of the relevant studies had an average score of 20 or above on the 0 to 56 point Berg Balance Scale. The absolute reliability across this part of the scale, as measured by the minimal detectable change with 95% confidence, varied between 2.8 points and 6.6 points. The Berg Balance Scale has a higher absolute reliability when close to 56 points due to the ceiling effect. We identified no data that estimated the absolute reliability of the Berg Balance Scale among participants with a mean score below 20 out of 56. The Berg Balance Scale has acceptable reliability, although it might not detect modest, clinically important changes in balance in individual subjects. The review was only able to comment on the absolute reliability of the Berg Balance Scale among people with moderately poor to normal balance. Copyright © 2013 Australian Physiotherapy Association. Published by .. All rights reserved.

Selection and Reporting of Statistical Methods to Assess Reliability of a Diagnostic Test: Conformity to Recommended Methods in a Peer-Reviewed Journal

PubMed Central

Park, Ji Eun; Han, Kyunghwa; Sung, Yu Sub; Chung, Mi Sun; Koo, Hyun Jung; Yoon, Hee Mang; Choi, Young Jun; Lee, Seung Soo; Kim, Kyung Won; Shin, Youngbin; An, Suah; Cho, Hyo-Min

2017-01-01

Objective To evaluate the frequency and adequacy of statistical analyses in a general radiology journal when reporting a reliability analysis for a diagnostic test. Materials and Methods Sixty-three studies of diagnostic test accuracy (DTA) and 36 studies reporting reliability analyses published in the Korean Journal of Radiology between 2012 and 2016 were analyzed. Studies were judged using the methodological guidelines of the Radiological Society of North America-Quantitative Imaging Biomarkers Alliance (RSNA-QIBA), and COnsensus-based Standards for the selection of health Measurement INstruments (COSMIN) initiative. DTA studies were evaluated by nine editorial board members of the journal. Reliability studies were evaluated by study reviewers experienced with reliability analysis. Results Thirty-one (49.2%) of the 63 DTA studies did not include a reliability analysis when deemed necessary. Among the 36 reliability studies, proper statistical methods were used in all (5/5) studies dealing with dichotomous/nominal data, 46.7% (7/15) of studies dealing with ordinal data, and 95.2% (20/21) of studies dealing with continuous data. Statistical methods were described in sufficient detail regarding weighted kappa in 28.6% (2/7) of studies and regarding the model and assumptions of intraclass correlation coefficient in 35.3% (6/17) and 29.4% (5/17) of studies, respectively. Reliability parameters were used as if they were agreement parameters in 23.1% (3/13) of studies. Reproducibility and repeatability were used incorrectly in 20% (3/15) of studies. Conclusion Greater attention to the importance of reporting reliability, thorough description of the related statistical methods, efforts not to neglect agreement parameters, and better use of relevant terminology is necessary. PMID:29089821

Optimum Component Design in N-Stage Series Systems to Maximize the Reliability Under Budget Constraint

DTIC Science & Technology

2003-03-01

27 2.8.5 Marginal Analysis Method...Figure 11 Improved Configuration of Figure 10; Increases Basic System Reliability..... 26 Figure 12 Example of marginal analysis ...View of Main Book of Software ............................................................... 51 Figure 20 The View of Data Worksheet

Reliability and Factorial Validity of the Artes de Lenguaje.

ERIC Educational Resources Information Center

Powers, Stephen; And Others

1984-01-01

Spanish speaking first graders were administered the Artes de Lenguage (ADL)--a Spanish, criterion-referenced, language arts test. Reliability analyses indicated the adequacy of three of the four subscales (Phonetic Analysis, Vocabulary Development, Comprehension Skills, and General Skills). A principal factors analysis of the intercorrelation…

Addressing Uniqueness and Unison of Reliability and Safety for a Better Integration

NASA Technical Reports Server (NTRS)

Huang, Zhaofeng; Safie, Fayssal

2016-01-01

Over time, it has been observed that Safety and Reliability have not been clearly differentiated, which leads to confusion, inefficiency, and, sometimes, counter-productive practices in executing each of these two disciplines. It is imperative to address this situation to help Reliability and Safety disciplines improve their effectiveness and efficiency. The paper poses an important question to address, "Safety and Reliability - Are they unique or unisonous?" To answer the question, the paper reviewed several most commonly used analyses from each of the disciplines, namely, FMEA, reliability allocation and prediction, reliability design involvement, system safety hazard analysis, Fault Tree Analysis, and Probabilistic Risk Assessment. The paper pointed out uniqueness and unison of Safety and Reliability in their respective roles, requirements, approaches, and tools, and presented some suggestions for enhancing and improving the individual disciplines, as well as promoting the integration of the two. The paper concludes that Safety and Reliability are unique, but compensating each other in many aspects, and need to be integrated. Particularly, the individual roles of Safety and Reliability need to be differentiated, that is, Safety is to ensure and assure the product meets safety requirements, goals, or desires, and Reliability is to ensure and assure maximum achievability of intended design functions. With the integration of Safety and Reliability, personnel can be shared, tools and analyses have to be integrated, and skill sets can be possessed by the same person with the purpose of providing the best value to a product development.

Space flight risk data collection and analysis project: Risk and reliability database

NASA Technical Reports Server (NTRS)

1994-01-01

The focus of the NASA 'Space Flight Risk Data Collection and Analysis' project was to acquire and evaluate space flight data with the express purpose of establishing a database containing measurements of specific risk assessment - reliability - availability - maintainability - supportability (RRAMS) parameters. The developed comprehensive RRAMS database will support the performance of future NASA and aerospace industry risk and reliability studies. One of the primary goals has been to acquire unprocessed information relating to the reliability and availability of launch vehicles and the subsystems and components thereof from the 45th Space Wing (formerly Eastern Space and Missile Command -ESMC) at Patrick Air Force Base. After evaluating and analyzing this information, it was encoded in terms of parameters pertinent to ascertaining reliability and availability statistics, and then assembled into an appropriate database structure.

Reliability modelling and analysis of thermal MEMS

NASA Astrophysics Data System (ADS)

Muratet, Sylvaine; Lavu, Srikanth; Fourniols, Jean-Yves; Bell, George; Desmulliez, Marc P. Y.

2006-04-01

This paper presents a MEMS reliability study methodology based on the novel concept of 'virtual prototyping'. This methodology can be used for the development of reliable sensors or actuators and also to characterize their behaviour in specific use conditions and applications. The methodology is demonstrated on the U-shaped micro electro thermal actuator used as test vehicle. To demonstrate this approach, a 'virtual prototype' has been developed with the modeling tools MatLab and VHDL-AMS. A best practice FMEA (Failure Mode and Effect Analysis) is applied on the thermal MEMS to investigate and assess the failure mechanisms. Reliability study is performed by injecting the identified defaults into the 'virtual prototype'. The reliability characterization methodology predicts the evolution of the behavior of these MEMS as a function of the number of cycles of operation and specific operational conditions.

The Evaluation Method of the Lightning Strike on Transmission Lines Aiming at Power Grid Reliability

NASA Astrophysics Data System (ADS)

Wen, Jianfeng; Wu, Jianwei; Huang, Liandong; Geng, Yinan; Yu, zhanqing

2018-01-01

Lightning protection of power system focuses on reducing the flashover rate, only distinguishing by the voltage level, without considering the functional differences between the transmission lines, and being lack of analysis the effect on the reliability of power grid. This will lead lightning protection design of general transmission lines is surplus but insufficient for key lines. In order to solve this problem, the analysis method of lightning striking on transmission lines for power grid reliability is given. Full wave process theory is used to analyze the lightning back striking; the leader propagation model is used to describe the process of shielding failure of transmission lines. The index of power grid reliability is introduced and the effect of transmission line fault on the reliability of power system is discussed in detail.

Benchmarking Commercial Reliability Practices.

DTIC Science & Technology

1995-07-01

companies (70% of total), and to actually receive completed survey forms from 40 companies ( 60 % of participants, 40% of total identified). Reliability...E -20 -30 - A B C D E F G H I J KL MN OP Q R -40 - A = FMEA , B = FTA, C =Thermal Analysis, D = Sneak Circuit Analysis, E = Worst-Case Circuit Analysis...Failure Modes and Effects Analysis ( FMEA ), will be conducted. c. Commercial companies specify the environmental conditions for their products. In doing

An improved spanning tree approach for the reliability analysis of supply chain collaborative network

NASA Astrophysics Data System (ADS)

Lam, C. Y.; Ip, W. H.

2012-11-01

A higher degree of reliability in the collaborative network can increase the competitiveness and performance of an entire supply chain. As supply chain networks grow more complex, the consequences of unreliable behaviour become increasingly severe in terms of cost, effort and time. Moreover, it is computationally difficult to calculate the network reliability of a Non-deterministic Polynomial-time hard (NP-hard) all-terminal network using state enumeration, as this may require a huge number of iterations for topology optimisation. Therefore, this paper proposes an alternative approach of an improved spanning tree for reliability analysis to help effectively evaluate and analyse the reliability of collaborative networks in supply chains and reduce the comparative computational complexity of algorithms. Set theory is employed to evaluate and model the all-terminal reliability of the improved spanning tree algorithm and present a case study of a supply chain used in lamp production to illustrate the application of the proposed approach.

Proposed reliability cost model

NASA Technical Reports Server (NTRS)

Delionback, L. M.

1973-01-01

The research investigations which were involved in the study include: cost analysis/allocation, reliability and product assurance, forecasting methodology, systems analysis, and model-building. This is a classic example of an interdisciplinary problem, since the model-building requirements include the need for understanding and communication between technical disciplines on one hand, and the financial/accounting skill categories on the other. The systems approach is utilized within this context to establish a clearer and more objective relationship between reliability assurance and the subcategories (or subelements) that provide, or reenforce, the reliability assurance for a system. Subcategories are further subdivided as illustrated by a tree diagram. The reliability assurance elements can be seen to be potential alternative strategies, or approaches, depending on the specific goals/objectives of the trade studies. The scope was limited to the establishment of a proposed reliability cost-model format. The model format/approach is dependent upon the use of a series of subsystem-oriented CER's and sometimes possible CTR's, in devising a suitable cost-effective policy.

Reliability analysis of the solar array based on Fault Tree Analysis

NASA Astrophysics Data System (ADS)

Jianing, Wu; Shaoze, Yan

2011-07-01

The solar array is an important device used in the spacecraft, which influences the quality of in-orbit operation of the spacecraft and even the launches. This paper analyzes the reliability of the mechanical system and certifies the most vital subsystem of the solar array. The fault tree analysis (FTA) model is established according to the operating process of the mechanical system based on DFH-3 satellite; the logical expression of the top event is obtained by Boolean algebra and the reliability of the solar array is calculated. The conclusion shows that the hinges are the most vital links between the solar arrays. By analyzing the structure importance(SI) of the hinge's FTA model, some fatal causes, including faults of the seal, insufficient torque of the locking spring, temperature in space, and friction force, can be identified. Damage is the initial stage of the fault, so limiting damage is significant to prevent faults. Furthermore, recommendations for improving reliability associated with damage limitation are discussed, which can be used for the redesigning of the solar array and the reliability growth planning.

Reliability program requirements for aeronautical and space system contractors

NASA Technical Reports Server (NTRS)

1987-01-01

General reliability program requirements for NASA contracts involving the design, development, fabrication, test, and/or use of aeronautical and space systems including critical ground support equipment are prescribed. The reliability program requirements require (1) thorough planning and effective management of the reliability effort; (2) definition of the major reliability tasks and their place as an integral part of the design and development process; (3) planning and evaluating the reliability of the system and its elements (including effects of software interfaces) through a program of analysis, review, and test; and (4) timely status indication by formal documentation and other reporting to facilitate control of the reliability program.

Space station software reliability analysis based on failures observed during testing at the multisystem integration facility

NASA Technical Reports Server (NTRS)

Tamayo, Tak Chai

1987-01-01

Quality of software not only is vital to the successful operation of the space station, it is also an important factor in establishing testing requirements, time needed for software verification and integration as well as launching schedules for the space station. Defense of management decisions can be greatly strengthened by combining engineering judgments with statistical analysis. Unlike hardware, software has the characteristics of no wearout and costly redundancies, thus making traditional statistical analysis not suitable in evaluating reliability of software. A statistical model was developed to provide a representation of the number as well as types of failures occur during software testing and verification. From this model, quantitative measure of software reliability based on failure history during testing are derived. Criteria to terminate testing based on reliability objectives and methods to estimate the expected number of fixings required are also presented.

Reliable absolute analog code retrieval approach for 3D measurement

NASA Astrophysics Data System (ADS)

Yu, Shuang; Zhang, Jing; Yu, Xiaoyang; Sun, Xiaoming; Wu, Haibin; Chen, Deyun

2017-11-01

The wrapped phase of phase-shifting approach can be unwrapped by using Gray code, but both the wrapped phase error and Gray code decoding error can result in period jump error, which will lead to gross measurement error. Therefore, this paper presents a reliable absolute analog code retrieval approach. The combination of unequal-period Gray code and phase shifting patterns at high frequencies are used to obtain high-frequency absolute analog code, and at low frequencies, the same unequal-period combination patterns are used to obtain the low-frequency absolute analog code. Next, the difference between the two absolute analog codes was employed to eliminate period jump errors, and a reliable unwrapped result can be obtained. Error analysis was used to determine the applicable conditions, and this approach was verified through theoretical analysis. The proposed approach was further verified experimentally. Theoretical analysis and experimental results demonstrate that the proposed approach can perform reliable analog code unwrapping.

Caregiving for ill dependents and its association with employee health risks and productivity.

PubMed

Burton, Wayne N; Chen, Chin-Yu; Conti, Daniel J; Pransky, Glenn; Edington, Dee W

2004-10-01

This study examined the loss of productivity and health risk status associated with employees who provide care for an ill dependent. A total of 16,651 employees (23% response rate) of a major financial services company completed a confidential Health Risk Appraisal (HRA) that included an eight-item version of the Work Limitations Questionnaire and a self-report of time missed from work during the previous 2 weeks to care for an ill dependent. A total of 10.6% of the respondents reported an average of 7.7 hours absent from work during the previous 2-week period to provide care for an ill dependent. Caregiving also was associated with a significant increase in the number of health risks for the employee. As the demand for caregiving time increased, caregivers reported a significant increase in work limitations. Caregiving for an ill dependent is associated with increased absenteeism and significant work limitations while on the job. Programs and work organization that helps employees balance their caregiving responsibilities for ill dependents may have a positive effect on health and productivity.

The impact of behavioral and mental health risk assessments on goal setting in primary care.

PubMed

Krist, Alex H; Glasgow, Russell E; Heurtin-Roberts, Suzanne; Sabo, Roy T; Roby, Dylan H; Gorin, Sherri N Sheinfeld; Balasubramanian, Bijal A; Estabrooks, Paul A; Ory, Marcia G; Glenn, Beth A; Phillips, Siobhan M; Kessler, Rodger; Johnson, Sallie Beth; Rohweder, Catherine L; Fernandez, Maria E

2016-06-01

Patient-centered health risk assessments (HRAs) that screen for unhealthy behaviors, prioritize concerns, and provide feedback may improve counseling, goal setting, and health. To evaluate the effectiveness of routinely administering a patient-centered HRA, My Own Health Report, for diet, exercise, smoking, alcohol, drug use, stress, depression, anxiety, and sleep, 18 primary care practices were randomized to ask patients to complete My Own Health Report (MOHR) before an office visit (intervention) or continue usual care (control). Intervention practice patients were more likely than control practice patients to be asked about each of eight risks (range of differences 5.3-15.8 %, p < 0.001), set goals for six risks (range of differences 3.8-16.6 %, p < 0.01), and improve five risks (range of differences 5.4-13.6 %, p < 0.01). Compared to controls, intervention patients felt clinicians cared more for them and showed more interest in their concerns. Patient-centered health risk assessments improve screening and goal setting.Trial RegistrationClinicaltrials.gov identifier: NCT01825746.

Superplastic Forming/Diffusion Bonding Without Interlayer of 5A90 Al-Li Alloy Hollow Double-Layer Structure

NASA Astrophysics Data System (ADS)

Jiang, Shaosong; Jia, Yong; Lu, Zhen; Shi, Chengcheng; Zhang, Kaifeng

2017-09-01

The hollow double-layer structure of 5A90 Al-Li alloy was fabricated by SPF/DB process in this study. The characteristics and mechanism of 5A90 Al-Li alloy with respect to superplasticity and diffusion bonding were investigated. Tensile tests showed that the optimal elongation of tensile specimens was 243.97% at the temperature of 400 °C and the strain rate of 0.001 s-1. Effect of the surface roughness, bonding temperature and bonding time to determine the microstructure and mechanical properties of diffusion bonding joints was investigated, and the optimum bonding parameters were 540 °C/2.5 h/Ra18. Through the finite element simulation, it could be found that the SPF/DB process of hollow double-layer structure was feasible. The hollow double-layer structure of 5A90 Al-Li alloy was manufactured, showing that the thickness distribution of the bonding area was uniform and the thinnest part was the round corner. The SEM images of diffusion bonding joints showed that sound bonding interfaces were obtained in which no discontinuity existed.

Cross-Cultural Adaptation and Validation of the Italian Version of SWAL-QOL.

PubMed

Ginocchio, Daniela; Alfonsi, Enrico; Mozzanica, Francesco; Accornero, Anna Rosa; Bergonzoni, Antonella; Chiarello, Giulia; De Luca, Nicoletta; Farneti, Daniele; Marilia, Simonelli; Calcagno, Paola; Turroni, Valentina; Schindler, Antonio

2016-10-01

The aim of the study was to evaluate the reliability and validity of the Italian SWAL-QOL (I-SWAL-QOL). The study consisted of five phases: item generation, reliability analysis, normative data generation, validity analysis, and responsiveness analysis. The item generation phase followed the five-step, cross-cultural, adaptation process of translation and back-translation. A group of 92 dysphagic patients was enrolled for the internal consistency analysis. Seventy-eight patients completed the I-SWAL-QOL twice, 2 weeks apart, for test-retest reliability analysis. A group of 200 asymptomatic subjects completed the I-SWAL-QOL for normative data generation. I-SWAL-QOL scores obtained by both the group of dysphagic subjects and asymptomatic ones were compared for validity analysis. I-SWAL-QOL scores were correlated with SF-36 scores in 67 patients with dysphagia for concurrent validity analysis. Finally, I-SWAL-QOL scores obtained in a group of 30 dysphagic patients before and after successful rehabilitation treatment were compared for responsiveness analysis. All the enrolled patients managed to complete the I-SWAL-QOL without needing any assistance, within 20 min. Internal consistency was acceptable for all I-SWAL-QOL subscales (α > 0.70). Test-retest reliability was also satisfactory for all subscales (ICC > 0.7). A significant difference between the dysphagic group and the control group was found in all I-SWAL-QOL subscales (p < 0.05). Mild to moderate correlations between I-SWAL-QOL and SF-36 subscales were observed. I-SWAL-QOL scores obtained in the pre-treatment condition were significantly lower than those obtained after swallowing rehabilitation. I-SWAL-QOL is reliable, valid, responsive to changes in QOL, and recommended for clinical practice and outcome research.