Complementarity of statistical treatments to reconstruct worldwide routes of invasion: The case of the Asian ladybird Harmonia axyridis

USDA-ARS?s Scientific Manuscript database

Technical Abstract. Molecular markers can provide clear insight into the introduction history of invasive species. However, inferences about recent introduction histories remain challenging, because of the stochastic demographic processes often involved. Approximate Bayesian computation (ABC) can he...

Challenges to Technical and Vocational Education.

ERIC Educational Resources Information Center

Schmidt, Hermann

Advances in information technology are changing industrialized societies into knowledge societies. The end of the cold war has promoted development of a global economy. Growing ecological consciousness has necessitated that environmental knowledge become part of all education. As the need to remain competitive increases, a new balance in…

A Brief Literature Overview of Various Routes to Biorenewable Fuels from Lipids for the National Alliance for Advanced Biofuels and Bio-products (NAABB) Consortium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Albrecht, Karl O.; Hallen, Richard T.

2011-03-29

Renewable methods of producing transportation fuels are currently the focus of numerous large research efforts across the globe. Renewable fuel produced from algal lipids is one aspect of this research that could have profound implications on future transportation fuel requirements. However, technical challenges remain in several areas of algal-lipid-based fuels. These challenges include the identification and development of robust and productive algal species as well as extraction methods to recover the produced lipids. Not the least of these technical challenges is the conversion of the algae lipids to fungible fuels. This brief literature review focuses primarily on state-of-the-art “downstream” applicationsmore » of producing fuel from fats and lipids, which can be applied to ongoing research with algae-derived lipids.« less

I Got 99 Problems, and eHealth Is One.

PubMed

Wass, Sofie; Vimarlund, Vivian

2017-01-01

Many eHealth initiatives are never implemented or merely end as pilot projects. Previous studies report that organisational, technical and human issues need to be properly taken into consideration if such initiatives are to be successful. The aim of this paper is to explore whether previously identified challenges within the area have remained in the Swedish eHealth setting or whether they have changed. After interviewing experts in eHealth, we present a classification of areas of concern. Recurrence of previously identified challenges was found, but also new issues were identified. The results of the study indicate that there is a need to consider organisational and semantic issues on both national and international levels. Legal and technical challenges still exist but it seems even more important to support eHealth initiatives financially, increase practitioners' knowledge in health informatics and manage new expectations from patients.

Evaluating Chemical Reactivity And Mechanical Stability Of Nano Palladized Iron Embedded In Activated Carbon On Dechlorination Of Polychlorinated Biphenyls

EPA Science Inventory

Remediation of contaminated sites with hydrophobic organic compounds such as polychlorinated biphenyls (PCBs) remains a scientific and technical challenge. The high stability, low aqueous solubility, and high organic affinity of PCBs make them difficult to treat. Many physical,...

Retention and Professional Mentoring of Beginning Career and Technical Education Teachers

ERIC Educational Resources Information Center

Mordan, Benjamin R.

2012-01-01

A fundamental requirement for providing quality education in schools is to encourage highly qualified individuals with the necessary knowledge and skill to enter the teaching profession and remain employed in this occupation. Attracting and retaining effective teachers has historically presented a considerable challenge for schools across many…

Full-arch milled titanium implant bridge: technical report.

PubMed

Peché, Wendy-Ann; Van Vuuren, Ludwig Jansen; Park, Chae

2011-09-01

The manufacturing of full-arch fixed implant-supported bridges with the use of the traditional lost wax technique remains a technical challenge. Distortion of the alloy during casting and subsequent heating cycles during porcelain build-up causes numerous problems. Fracturing of porcelain on large restorations is difficult and costly to restore. The fitting problems can be eliminated by utilising CAD/CAM technology in the manufacturing of long-span or full-arch titanium bridges. Repair of damaged porcelain can be simplified with the use of discrete, individually-removable crowns on the bridge.

Advancing Diagnostic Skills for Technology and Engineering Undergraduates: A Summary of the Validation Data

ERIC Educational Resources Information Center

Foster, W. Tad; Shahhosseini, A. Mehran; Maughan, George

2016-01-01

Facilitating student growth and development in diagnosing and solving technical problems remains a challenge for technology and engineering educators. With funding from the National Science Foundation, this team of researchers developed a self-guided, computer-based instructional program to experiment with conceptual mapping as a treatment to…

Current status and perspectives in split liver transplantation

PubMed Central

Lauterio, Andrea; Di Sandro, Stefano; Concone, Giacomo; De Carlis, Riccardo; Giacomoni, Alessandro; De Carlis, Luciano

2015-01-01

Growing experience with the liver splitting technique and favorable results equivalent to those of whole liver transplant have led to wider application of split liver transplantation (SLT) for adult and pediatric recipients in the last decade. Conversely, SLT for two adult recipients remains a challenging surgical procedure and outcomes have yet to improve. Differences in organ shortages together with religious and ethical issues related to cadaveric organ donation have had an impact on the worldwide distribution of SLT. Despite technical refinements and a better understanding of the complex liver anatomy, SLT remains a technically and logistically demanding surgical procedure. This article reviews the surgical and clinical advances in this field of liver transplantation focusing on the role of SLT and the issues that may lead a further expansion of this complex surgical procedure. PMID:26494957

DMDs for multi-object near-infrared spectrographs in astronomy

NASA Astrophysics Data System (ADS)

Smee, Stephen A.; Barkhouser, Robert; Hope, Stephen; Conley, Devin; Gray, Aidan; Hope, Gavin; Robberto, Massimo

2018-02-01

The Digital Micromirror Device (DMD), typically used in projection screen technology, has utility in instrumentation for astronomy as a digitally programmable slit in a spectrograph. When placed at an imaging focal plane the device can be used to selectively direct light from astronomical targets into the optical path of a spectrograph, while at the same time directing the remaining light into an imaging camera, which can be used for slit alignment, science imaging, or both. To date the use of DMDs in astronomy has been limited, especially for instruments that operate in the near infrared (1 - 2.5 μm). This limitation is due in part to a host of technical challenges with respect to DMDs that, to date, have not been thoroughly explored. Those challenges include operation at cryogenic temperature, control electronics that facilitate DMD use at these temperatures, window coatings properly coated for the near infrared bandpass, and scattered light. This paper discusses these technical challenges and presents progress towards understanding and mitigating them.

Laparoscopic partial nephrectomy: Technical considerations and an update

PubMed Central

Dominguez-Escrig, Jose L; Vasdev, Nikhil; O’Riordon, Anna; Soomro, Naeem

2011-01-01

The widespread use of radiological imaging (ultrasound, computed tomography and magnetic resonance imaging) has resulted in a steady increase in the incidental diagnosis of small renal masses. While open partial nephrectomy (OPN) remains the reference standard for the management of small renal masses, laparoscopic partial nephrectomy (LPN) continues to evolve. LPN is currently advocated to be at par with OPN oncologically. The steep learning curve and technical demand of LPN make it challenging to establish this as a new procedure. We present a detailed up-to-date review on the previous, current and planned technical considerations for the use of LPN, highlighting important surgical techniques, including single-port and robotic surgery, techniques on improving intra-operative haemostasis and the management of complications specific to LPN. PMID:22022109

Packaging of silicon photonic devices: from prototypes to production

NASA Astrophysics Data System (ADS)

Morrissey, Padraic E.; Gradkowski, Kamil; Carroll, Lee; O'Brien, Peter

2018-02-01

The challenges associated with the photonic packaging of silicon devices is often underestimated and remains technically challenging. In this paper, we review some key enabling technologies that will allow us to overcome the current bottleneck in silicon photonic packaging; while also describing the recent developments in standardisation, including the establishment of PIXAPP as the worlds first open-access PIC packaging and assembly Pilot Line. These developments will allow the community to move from low volume prototype photonic packaged devices to large scale volume manufacturing, where the full commercialisation of PIC technology can be realised.

Advances in anesthesia technology are improving patient care, but many challenges remain.

PubMed

John Doyle, D; Dahaba, Ashraf; LeManach, Yannick

2018-04-13

Although significant advances in clinical monitoring technology and clinical practice development have taken place in the last several decades, in this editorial we argue that much more still needs to be done. We begin by identifying many of the improvements in perioperative technology that have become available in recent years; these include electroencephalographic depth of anesthesia monitoring, bedside ultrasonography, advanced neuromuscular transmission monitoring systems, and other developments. We then discuss some of the perioperative technical challenges that remain to be satisfactorily addressed, such as products that incorporate poor software design or offer a confusing user interface. Finally we suggest that the journal support initiatives to help remedy this problem by publishing reports on the evaluation of medical equipment as a means to restore the link between clinical research and clinical end-users.

Fetal MRI: A Technical Update with Educational Aspirations

PubMed Central

Gholipour, Ali; Estroff, Judith A.; Barnewolt, Carol E.; Robertson, Richard L.; Grant, P. Ellen; Gagoski, Borjan; Warfield, Simon K.; Afacan, Onur; Connolly, Susan A.; Neil, Jeffrey J.; Wolfberg, Adam; Mulkern, Robert V.

2015-01-01

Fetal magnetic resonance imaging (MRI) examinations have become well-established procedures at many institutions and can serve as useful adjuncts to ultrasound (US) exams when diagnostic doubts remain after US. Due to fetal motion, however, fetal MRI exams are challenging and require the MR scanner to be used in a somewhat different mode than that employed for more routine clinical studies. Herein we review the techniques most commonly used, and those that are available, for fetal MRI with an emphasis on the physics of the techniques and how to deploy them to improve success rates for fetal MRI exams. By far the most common technique employed is single-shot T2-weighted imaging due to its excellent tissue contrast and relative immunity to fetal motion. Despite the significant challenges involved, however, many of the other techniques commonly employed in conventional neuro- and body MRI such as T1 and T2*-weighted imaging, diffusion and perfusion weighted imaging, as well as spectroscopic methods remain of interest for fetal MR applications. An effort to understand the strengths and limitations of these basic methods within the context of fetal MRI is made in order to optimize their use and facilitate implementation of technical improvements for the further development of fetal MR imaging, both in acquisition and post-processing strategies. PMID:26225129

Crowd-sourced assessment of technical skills: an opportunity for improvement in the assessment of laparoscopic surgical skills.

PubMed

Deal, Shanley B; Lendvay, Thomas S; Haque, Mohamad I; Brand, Timothy; Comstock, Bryan; Warren, Justin; Alseidi, Adnan

2016-02-01

Objective, unbiased assessment of surgical skills remains a challenge in surgical education. We sought to evaluate the feasibility and reliability of Crowd-Sourced Assessment of Technical Skills. Seven volunteer general surgery interns were given time for training and then testing, on laparoscopic peg transfer, precision cutting, and intracorporeal knot-tying. Six faculty experts (FEs) and 203 Amazon.com Mechanical Turk crowd workers (CWs) evaluated 21 deidentified video clips using the Global Objective Assessment of Laparoscopic Skills validated rating instrument. Within 19 hours and 15 minutes we received 662 eligible ratings from 203 CWs and 126 ratings from 6 FEs over 10 days. FE video ratings were of borderline internal consistency (Krippendorff's alpha = .55). FE ratings were highly correlated with CW ratings (Pearson's correlation coefficient = .78, P < .001). We propose the use of Crowd-Sourced Assessment of Technical Skills as a reliable, basic tool to standardize the evaluation of technical skills in general surgery. Copyright © 2016 Elsevier Inc. All rights reserved.

Technical support for Life Sciences communities on a production grid infrastructure.

PubMed

Michel, Franck; Montagnat, Johan; Glatard, Tristan

2012-01-01

Production operation of large distributed computing infrastructures (DCI) still requires a lot of human intervention to reach acceptable quality of service. This may be achievable for scientific communities with solid IT support, but it remains a show-stopper for others. Some application execution environments are used to hide runtime technical issues from end users. But they mostly aim at fault-tolerance rather than incident resolution, and their operation still requires substantial manpower. A longer-term support activity is thus needed to ensure sustained quality of service for Virtual Organisations (VO). This paper describes how the biomed VO has addressed this challenge by setting up a technical support team. Its organisation, tooling, daily tasks, and procedures are described. Results are shown in terms of resource usage by end users, amount of reported incidents, and developed software tools. Based on our experience, we suggest ways to measure the impact of the technical support, perspectives to decrease its human cost and make it more community-specific.

In situ fenestrations for the aortic arch and visceral segment: advances and challenges.

PubMed

Riga, Celia V; McWilliams, Richard G; Cheshire, Nicholas J W

2011-09-01

The management of complex aortic pathologies remains a major challenge particularly in the emergency setting. Bespoke fenestrated and branch stent graft technology has shown encouraging short- and mid-term results in selected patients. Despite tremendous technological advances in this field however, factors such as the inherent delay in device manufacturing, anatomical and technical challenges, high degree of planning, and cost hinder the wider applications of minimally invasive endovascular therapy. In situ fenestration of aortic stent grafts is an attractive alternative that eliminates the need for preoperative custom tailoring with the potential to widen the therapeutic options available and to offer a bailout option after inadvertent side branch occlusion. This article summarizes the principles of this technique and discusses its current applications.

Big data are coming to psychiatry: a general introduction.

PubMed

Monteith, Scott; Glenn, Tasha; Geddes, John; Bauer, Michael

2015-12-01

Big data are coming to the study of bipolar disorder and all of psychiatry. Data are coming from providers and payers (including EMR, imaging, insurance claims and pharmacy data), from omics (genomic, proteomic, and metabolomic data), and from patients and non-providers (data from smart phone and Internet activities, sensors and monitoring tools). Analysis of the big data will provide unprecedented opportunities for exploration, descriptive observation, hypothesis generation, and prediction, and the results of big data studies will be incorporated into clinical practice. Technical challenges remain in the quality, analysis and management of big data. This paper discusses some of the fundamental opportunities and challenges of big data for psychiatry.

Refined approach for quantification of in vivo ischemia-reperfusion injury in the mouse heart

PubMed Central

Medway, Debra J.; Schulz-Menger, Jeanette; Schneider, Jurgen E.; Neubauer, Stefan; Lygate, Craig A.

2009-01-01

Cardiac ischemia-reperfusion experiments in the mouse are important in vivo models of human disease. Infarct size is a particularly important scientific readout as virtually all cardiocirculatory pathways are affected by it. Therefore, such measurements must be exact and valid. The histological analysis, however, remains technically challenging, and the resulting quality is often unsatisfactory. For this report we have scrutinized each step involved in standard double-staining histology. We have tested published approaches and challenged their practicality. As a result, we propose an improved and streamlined protocol, which consistently yields high-quality histology, thereby minimizing experimental noise and group sizes. PMID:19820193

Status, Vision, and Challenges of an Intelligent Distributed Engine Control Architecture

NASA Technical Reports Server (NTRS)

Behbahani, Alireza; Culley, Dennis; Garg, Sanjay; Millar, Richard; Smith, Bert; Wood, Jim; Mahoney, Tim; Quinn, Ronald; Carpenter, Sheldon; Mailander, Bill;

Military Technical Revolution: A Structural Framework

DTIC Science & Technology

1993-03-01

new world situation and draw conclusions about the military forces the United States will need in the years ahead to meet its demands and challenges...collectivization of peacetime military operations. In this new world , the United States will need to rethink the nature and scope of its national interests. Those...mission will also require defense of international sea- lanes and Middle East oil, both of which remain vital to the world and U ’. S . economies. Third

Advanced Development of the rF1V and rBV A/B Vaccines: Progress and Challenges

PubMed Central

Hart, Mary Kate; Saviolakis, George A.; Welkos, Susan L.; House, Robert V.

2012-01-01

The development of vaccines for microorganisms and bacterial toxins with the potential to be used as biowarfare and bioterrorism agents is an important component of the US biodefense program. DVC is developing two vaccines, one against inhalational exposure to botulinum neurotoxins A1 and B1 and a second for Yersinia pestis, with the ultimate goal of licensure by the FDA under the Animal Rule. Progress has been made in all technical areas, including manufacturing, nonclinical, and clinical development and testing of the vaccines, and in assay development. The current status of development of these vaccines, and remaining challenges are described in this chapter. PMID:22028978

Rapid Development of Gossamer Propulsion for NASA Inner Solar System Science Missions

NASA Technical Reports Server (NTRS)

Young, Roy M.; Montgomery, Edward E.

2006-01-01

Over a two and one-half year period dating from 2003 through 2005, NASA s In-Space Propulsion Program matured solar sail technology from laboratory components to full systems, demonstrated in as relevant a space environment as could feasibly be simulated on the ground. This paper describes the challenges identified; as well as the approaches taken toward solving a broad set of issues spanning material science, manufacturing technology, and interplanetary trajectory optimization. Revolutionary advances in system structural predictive analysis and characterization testing occurred. Also addressed are the remaining technology challenges that might be resolved with further ground technology research, geared toward reducing technical risks associated with future space validation and science missions.

The hospital library and the enterprise portal.

PubMed

Bandy, Margaret; Fosmire, Brenda

2004-01-01

At Exempla Healthcare, the medical librarians and the e-Business staff are creating an enterprise information portal where medical reference is targeted, easily accessible, and supported by the medical librarians. A team approach has been essential. The e-Business department has worked for nine months coordinating technical challenges required to support personalization, targeted communications, and a single access point for clinical patient data. Exempla medical librarians have been involved in the definition and design of information access needs from the very beginning. The Clinicians Portal was the first developed, with other customizations to follow. Many challenges remain, but by definition, a portal is designed to be flexible and adapt to the changing needs of the enterprise it supports.

Surgical simulation: Current practices and future perspectives for technical skills training.

PubMed

Bjerrum, Flemming; Thomsen, Ann Sofia Skou; Nayahangan, Leizl Joy; Konge, Lars

2018-06-17

Simulation-based training (SBT) has become a standard component of modern surgical education, yet successful implementation of evidence-based training programs remains challenging. In this narrative review, we use Kern's framework for curriculum development to describe where we are now and what lies ahead for SBT within surgery with a focus on technical skills in operative procedures. Despite principles for optimal SBT (proficiency-based, distributed, and deliberate practice) having been identified, massed training with fixed time intervals or a fixed number of repetitions is still being extensively used, and simulators are generally underutilized. SBT should be part of surgical training curricula, including theoretical, technical, and non-technical skills, and be based on relevant needs assessments. Furthermore, training should follow evidence-based theoretical principles for optimal training, and the effect of training needs to be evaluated using relevant outcomes. There is a larger, still unrealized potential of surgical SBT, which may be realized in the near future as simulator technologies evolve, more evidence-based training programs are implemented, and cost-effectiveness and impact on patient safety is clearly demonstrated.

Recent advances in managing tricuspid regurgitation

PubMed Central

Del Forno, Benedetto; Lapenna, Elisabetta; Dalrymple-Hay, Malcom; Taramasso, Maurizio; Castiglioni, Alessandro; Alfieri, Ottavio; De Bonis, Michele

2018-01-01

Isolated tricuspid valve surgery is usually carried out with very high morbidity and mortality given the complexity of the affected patients. In light of this, trans-catheter tricuspid valve interventions have been emerging as an attractive alternative to surgery over the last few years. Although feasibility has been shown with a number of devices, clinical experience remains preliminary and associated with significant clinical and technical challenges. Here we describe currently available trans-catheter treatment options for severe tricuspid regurgitation implanted in different locations. PMID:29636903

On axionic field ranges, loopholes and the weak gravity conjecture

DOE PAGES

Brown, Jon; Cottrell, William; Shiu, Gary; ...

2016-04-05

Here, we clarify some aspects of the impact that the Weak Gravity Conjecture has on models of (generalized) natural inflation. In particular we address certain technical and conceptual concerns recently raised regarding the stringent constraints and conclusions found in our previous work. We also point out the difficulties faced by attempts to evade these constraints. Furthermore, these new considerations improve the understanding of the quantum gravity constraints we found and further support the conclusion that it remains challenging for axions to drive natural inflation.

Supersonic Post-Combustion Inertial CO 2 Extraction System Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balepin, Vladimir

This report summarizes the effort carried out under NETL contract DE- FE0013122 from 1 October 2013 to 31 March 2017. As described in this document, technical challenges realized during the performance of this project resulted in completion of only the first two of three planned budget periods. Despite this outcome, substantial progress was made toward understanding and maturing the CO 2 capture technology under consideration and considerable future promise remains for applications requiring lower CO 2 capture and/or lower CO 2.

The Challenges of Career and Technical Education Concurrent Enrollment: An Administrative Perspective

ERIC Educational Resources Information Center

Haag, Patricia W.

2015-01-01

Career and technical education concurrent enrollment may pose unique challenges in programming and enrollment for program administrators, and this chapter describes the experiences and challenges of a CTE concurrent enrollment administrator.

Challenges and unanswered questions for the next decade of circulating tumour cell research in lung cancer

PubMed Central

Mohan, Sumitra; Chemi, Francesca

2017-01-01

Since blood borne circulating tumour cells (CTCs) initially shed from the primary tumour can seed and initiate metastasis at distant sites a better understanding of the biology of CTCs and their dissemination could provide valuable information that could guide therapeutic intervention and real time monitoring of disease progression. Although CTC enumeration has provided a reliable prognostic readout for a number of cancers, including lung cancer, the precise clinical utility of CTCs remains to be established. The rarity of CTCs together with the vanishingly small amounts of nucleic acids present in a single cell as well as cell to cell heterogeneity has stimulated the development of a wide range of powerful cellular and molecular methodologies applied to CTCs. These technical developments are now enabling researchers to focus on understanding the biology of CTCs and their clinical utility as a predictive and pharmacodynamics markers. This review summarises recent advances in the field of CTC research with focus on technical and biological challenges as well the progress made towards clinical utility of characterisation of CTCs with emphasis on studies in lung cancer. PMID:28904889

New Mexico Small Business Assistance

Science.gov Websites

expertise Technical Assistance Individual Assistance Individual Assistance Request Form Leveraged Projects Assistance (NMSBA) Program allows New Mexico small businesses facing a technical challenge to access the business, small businesses with a technical challenge can seek assistance from lab scientists or engineers

Risk factors for technical failure of endoscopic double self-expandable metallic stent placement by partial stent-in-stent method.

PubMed

Kawakubo, Kazumichi; Kawakami, Hiroshi; Toyokawa, Yoshihide; Otani, Koichi; Kuwatani, Masaki; Abe, Yoko; Kawahata, Shuhei; Kubo, Kimitoshi; Kubota, Yoshimasa; Sakamoto, Naoya

2015-01-01

Endoscopic double self-expandable metallic stent (SEMS) placement by the partial stent-in-stent (PSIS) method has been reported to be useful for the management of unresectable hilar malignant biliary obstruction. However, it is technically challenging, and the optimal SEMS for the procedure remains unknown. The aim of this study was to identify the risk factors for technical failure of endoscopic double SEMS placement for unresectable malignant hilar biliary obstruction (MHBO). Between December 2009 and May 2013, 50 consecutive patients with MHBO underwent endoscopic double SEMS placement by the PSIS method. We retrospectively evaluated the rate of successful double SEMS placement and identified the risk factors for technical failure. The technical success rate for double SEMS placement was 82.0% (95% confidence interval [CI]: 69.2-90.2). On univariate analysis, the rate of technical failure was high in patients with metastatic disease and unilateral placement. Multivariate analysis revealed that metastatic disease was a significant risk factor for technical failure (odds ratio: 9.63, 95% CI: 1.11-105.5). The subgroup analysis after double guidewire insertion showed that the rate of technical success was higher in the laser-cut type SEMS with a large mesh and thick delivery system than in the braided type SEMS with a small mesh and thick delivery system. Metastatic disease was a significant risk factor for technical failure of double SEMS placement for unresectable MHBO. The laser-cut type SEMS with a large mesh and thin delivery system might be preferable for the PSIS procedure. © 2014 Japanese Society of Hepato-Biliary-Pancreatic Surgery.

The Colombian nuclear scenario: Challenges and opportunities

NASA Astrophysics Data System (ADS)

Martinez, Isabel

2016-07-01

In Colombia, the absence of nuclear-oriented policies based on technical knowledge, the closing of the Nuclear Affairs Institute (1956-1998), the association of the word "nuclear" with weapons, plus the country's last six decades of internal conflict and narcotraffic have discourage the technical, social and environmental nuclear advance. However, there are technical, social and economic national challenges that could be faced by the present nuclear technical capacities.

Virtual reality and medicine--from the cockpit to the operating room: are we there yet?

PubMed

Saied, Nahel

2005-01-01

Teaching medicine to medical students, physicians in training and nurses is a challenging task that has remained unchanged for decades. The airline industry has achieved a great deal of safety and quality in a technically challenging environment. Many believe that their outstanding achievement is due to team training and crew resource management using simulators and dedicated training programs. Many experts in the medical profession believe that adopting the same strategies in teaching medical students and trainees could achieve significant reductions in medical errors and improve the quality of patient care. This article explores the role of teaching medicine using virtual reality in a multitude of medical specialties and outlines the use of simulation training at Saint Louis University.

Under the sea: microbial life in volcanic oceanic crust.

PubMed

Edwards, Katrina J; Wheat, C Geoffrey; Sylvan, Jason B

2011-09-06

Exploration of the microbiology in igneous, 'hard rock' oceanic crust represents a major scientific frontier. The igneous crust harbours the largest aquifer system on Earth, most of which is hydrologically active, resulting in a substantial exchange of fluids, chemicals and microorganisms between oceanic basins and crustal reservoirs. Study of the deep-subsurface biosphere in the igneous crust is technically challenging. However, technologies have improved over the past decade, providing exciting new opportunities for the study of deep-seated marine life, including in situ and cross-disciplinary experimentation in microbiology, geochemistry and hydrogeology. In this Progress article, we describe the recent advances, available technology and remaining challenges in the study of the marine intraterrestrial microbial life that is harboured in igneous oceanic crust.

A Perkins Challenge: Assessing Technical Skills in CTE

ERIC Educational Resources Information Center

Stone, James R., III

2009-01-01

Federal law requires state to develop performance measures and data-collection systems for secondary and postsecondary technical-skill attainment. This poses many challenges, such as defining a technical skills, measurement and when to assess students. In this article, the author outlines various assessment models and looks at the challenges…

Education for a Working America. A Vision of Vocational Technical Education.

ERIC Educational Resources Information Center

National Association of State Directors of Vocational Technical Education Consortium.

This document presents the views of the National Association of State Directors of Vocational Technical Education regarding the challenge, mission, vision, underlying principles, practice, needs, and benefits/potential outcomes of vocational-technical education (VTE). The following topics are discussed: the challenge of making VTE the cornerstone…

Overcoming Resistance to New Ideas

ERIC Educational Resources Information Center

Powell, William; Kusuma-Powell, Ochan

2015-01-01

There are two types of challenges that adults face in their professional learning: technical and adaptive. Technical challenges simply require informational learning while adaptive challenges require transformational learning, which requires us to rethink our deeply held values, beliefs, assumptions, and even our professional identity. Adaptive…

OSiRIS: a distributed Ceph deployment using software defined networking for multi-institutional research

NASA Astrophysics Data System (ADS)

McKee, Shawn; Kissel, Ezra; Meekhof, Benjeman; Swany, Martin; Miller, Charles; Gregorowicz, Michael

2017-10-01

We report on the first year of the OSiRIS project (NSF Award #1541335, UM, IU, MSU and WSU) which is targeting the creation of a distributed Ceph storage infrastructure coupled together with software-defined networking to provide high-performance access for well-connected locations on any participating campus. The projects goal is to provide a single scalable, distributed storage infrastructure that allows researchers at each campus to read, write, manage and share data directly from their own computing locations. The NSF CC*DNI DIBBS program which funded OSiRIS is seeking solutions to the challenges of multi-institutional collaborations involving large amounts of data and we are exploring the creative use of Ceph and networking to address those challenges. While OSiRIS will eventually be serving a broad range of science domains, its first adopter will be the LHC ATLAS detector project via the ATLAS Great Lakes Tier-2 (AGLT2) jointly located at the University of Michigan and Michigan State University. Part of our presentation will cover how ATLAS is using the OSiRIS infrastructure and our experiences integrating our first user community. The presentation will also review the motivations for and goals of the project, the technical details of the OSiRIS infrastructure, the challenges in providing such an infrastructure, and the technical choices made to address those challenges. We will conclude with our plans for the remaining 4 years of the project and our vision for what we hope to deliver by the projects end.

Self-deconstructing algae biomass as feedstock for transportation fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, Ryan Wesley

The potential for producing biofuels from algae has generated much excitement based on projections of large oil yields with relatively little land use. However, numerous technical challenges remain for achieving market parity with conventional non-renewable liquid fuel sources. Among these challenges, the energy intensive requirements of traditional cell rupture, lipid extraction, and residuals fractioning of microalgae biomass have posed significant challenges to the nascent field of algal biotechnology. Our novel approach to address these problems was to employ low cost solution-state methods and biochemical engineering to eliminate the need for extensive hardware and energy intensive methods for cell rupture, carbohydratemore » and protein solubilization and hydrolysis, and fuel product recovery using consolidated bioprocessing strategies. The outcome of the biochemical deconstruction and conversion process consists of an emulsion of algal lipids and mixed alcohol products from carbohydrate and protein fermentation for co-extraction or in situ transesterification.« less

Crowdsourcing in biomedicine: challenges and opportunities

PubMed Central

Khare, Ritu; Good, Benjamin M.; Leaman, Robert; Su, Andrew I.

2016-01-01

The use of crowdsourcing to solve important but complex problems in biomedical and clinical sciences is growing and encompasses a wide variety of approaches. The crowd is diverse and includes online marketplace workers, health information seekers, science enthusiasts and domain experts. In this article, we review and highlight recent studies that use crowdsourcing to advance biomedicine. We classify these studies into two broad categories: (i) mining big data generated from a crowd (e.g. search logs) and (ii) active crowdsourcing via specific technical platforms, e.g. labor markets, wikis, scientific games and community challenges. Through describing each study in detail, we demonstrate the applicability of different methods in a variety of domains in biomedical research, including genomics, biocuration and clinical research. Furthermore, we discuss and highlight the strengths and limitations of different crowdsourcing platforms. Finally, we identify important emerging trends, opportunities and remaining challenges for future crowdsourcing research in biomedicine. PMID:25888696

Digital Pharmacovigilance and Disease Surveillance: Combining Traditional and Big-Data Systems for Better Public Health

PubMed Central

Salathé, Marcel

2016-01-01

The digital revolution has contributed to very large data sets (ie, big data) relevant for public health. The two major data sources are electronic health records from traditional health systems and patient-generated data. As the two data sources have complementary strengths—high veracity in the data from traditional sources and high velocity and variety in patient-generated data—they can be combined to build more-robust public health systems. However, they also have unique challenges. Patient-generated data in particular are often completely unstructured and highly context dependent, posing essentially a machine-learning challenge. Some recent examples from infectious disease surveillance and adverse drug event monitoring demonstrate that the technical challenges can be solved. Despite these advances, the problem of verification remains, and unless traditional and digital epidemiologic approaches are combined, these data sources will be constrained by their intrinsic limits. PMID:28830106

The role of structural dynamics in the design and operations of space systems: The history, the lessons, the technical challenges of the future

NASA Technical Reports Server (NTRS)

Ryan, Robert S.

1994-01-01

Structural dynamics and its auxiliary fields are the most progressive and challenging areas space system engineering design and operations face. Aerospace systems are dependent on structural dynamicists for their success. Past experiences (history) are colored with many dynamic issues, some producing ground or flight test failures. The innovation and creativity that was brought to these issues and problems are the aura from the past that lights the path to the future. Using this illumination to guide understanding of the dynamic phenomena and designing for its potential occurrence are the keys to successful space systems. Our great paradox, or challenge, is how we remain in depth specialists, yet become generalists to the degree that we make good team members and set the right priorities. This paper will deal with how we performed with acclaim in the past, the basic characteristics of structural dynamics (loads cycle, for example), and the challenges of the future.

Adaptive Management: From More Talk to Real Action

NASA Astrophysics Data System (ADS)

Williams, Byron K.; Brown, Eleanor D.

2014-02-01

The challenges currently facing resource managers are large-scale and complex, and demand new approaches to balance development and conservation goals. One approach that shows considerable promise for addressing these challenges is adaptive management, which by now is broadly seen as a natural, intuitive, and potentially effective way to address decision-making in the face of uncertainties. Yet the concept of adaptive management continues to evolve, and its record of success remains limited. In this article, we present an operational framework for adaptive decision-making, and describe the challenges and opportunities in applying it to real-world problems. We discuss the key elements required for adaptive decision-making, and their integration into an iterative process that highlights and distinguishes technical and social learning. We illustrate the elements and processes of the framework with some successful on-the-ground examples of natural resource management. Finally, we address some of the difficulties in applying learning-based management, and finish with a discussion of future directions and strategic challenges.

Program Plan for 2005: NASA Scientific and Technical Information Program

NASA Technical Reports Server (NTRS)

2005-01-01

Throughout 2005 and beyond, NASA will be faced with great challenges and even greater opportunities. Following a period of reevaluation, reinvention, and transformation, we will move rapidly forward to leverage new partnerships, approaches, and technologies that will enhance the way we do business. NASA's Scientific and Technical Information (STI) Program, which functions under the auspices of the Agency's Chief Information Officer (CIO), is an integral part of NASA's future. The program supports the Agency's missions to communicate scientific knowledge and understanding and to help transfer NASA's research and development (R&D) information to the aerospace and academic communities and to the public. The STI Program helps ensure that the Agency will remain at the leading edge of R&D by quickly and efficiently capturing and sharing NASA and worldwide STI to use for problem solving, awareness, and knowledge management and transfer.

Artificial chordae for degenerative mitral valve disease: critical analysis of current techniques

PubMed Central

Ibrahim, Michael; Rao, Christopher; Athanasiou, Thanos

2012-01-01

The surgical repair of degenerative mitral valve disease involves a number of technical points of importance. The use of artificial chordae for the repair of degenerative disease has increased as a part of the move from mitral valve replacement to repair of the mitral valve. The use of artificial chordae provides an alternative to the techniques pioneered by Carpentier (including the quadrangular resection, transfer of native chordae and papillary muscle shortening/plasty), which can be more technically difficult. Despite a growth in their uptake and the indications for their use, a number of challenges remain for the use of artificial chordae in mitral valve repair, particularly in the determination of the correct length to ensure optimal leaflet coaptation. Here, we analyse over 40 techniques described for artificial chordae mitral valve repair in the setting of degenerative disease. PMID:22962321

Percutaneous Image-Guided Cryoablation of Challenging Mediastinal Lesions Using Large-Volume Hydrodissection: Technical Considerations and Outcomes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garnon, Julien, E-mail: juliengarnon@gmail.com; Koch, Guillaume, E-mail: Guillaume.koch@gmail.com; Caudrelier, Jean, E-mail: caudjean@yahoo.fr

ObjectiveThis study was designed to describe the technique of percutaneous image-guided cryoablation with large-volume hydrodissection for the treatment of challenging mediastinal lesions.MethodsBetween March 2014 and June 2015, three patients (mean age 62.7 years) with four neoplastic anterior mediastinal lesions underwent five cryoablation procedures using large-volume hydrodissection. Procedures were performed under general anaesthesia using CT guidance. Lesion characteristics, hydrodissection and cryoablation data, technical success, complications, and clinical outcomes were assessed using retrospective chart review.ResultsLesions (mean size 2.7 cm; range 2–4.3 cm) were in contact with great vessels (n = 13), trachea (n = 3), and mediastinal nerves (n = 6). Hydrodissection was performed intercostally (n = 4), suprasternally (n = 2), transsternally (n = 1), ormore » via the sternoclavicular joint (n = 1) using 1–3 spinal needles over 13.4 (range 7–26) minutes; 450 ml of dilute contrast was injected (range 300–600 ml) and increased mean lesion-collateral structure distance from 1.9 to 7.7 mm. Vulnerable mediastinal nerves were identified in four of five procedures. Technical success was 100 %, with one immediate complication (recurrent laryngeal nerve injury). Mean follow-up period was 15 months. One lesion demonstrated residual disease on restaging PET-CT and was retreated to achieve complete ablation. At last follow-up, two patients remained disease-free, and one patient developed distant disease after 1 year without local recurrence.ConclusionsCryoablation using large-volume hydrodissection is a feasible technique, enabling safe and effective treatment of challenging mediastinal lesions.« less

Oil-Free Shaft Support System Rotordynamics: Past, Present, and Future Challenges and Opportunities

NASA Technical Reports Server (NTRS)

DellaCorte, Christopher

2011-01-01

Recent breakthroughs in Oil-Free technologies have enabled new high-speed rotor systems and turbomachinery. Such technologies can include compliant-surface gas bearings, magnetic bearings, and advanced solid lubricants and tribo-materials. This presentation briefly reviews critical technology developments and the current state-of-the-art, emerging Oil-Free rotor systems and discusses obstacles preventing more widespread use. Key examples of "best practices" for deploying Oil-Free technologies will be presented and remaining major technical questions surrounding Oil-Free technologies will be brought forward.

Evaluation of Warm and Cold Shaft Designs for Large Multi-megawatt Direct Drive Offshore Superconducting Wind Generators

NASA Astrophysics Data System (ADS)

Kulkarni, Devdatta; Chen, Edward; Ho, Mantak; Karmaker, Haran

For offshore large multi-megawatt direct drive wind generators, because of its ability to generate high flux fields, superconducting (SC) technology can offer significant size and mass reduction over traditional technologies. However, cryogenic cooling design remains as one of the major obstacles to overcome. Different cryogenic cooling designs, such as warm shaft and cold shaft rotor design, present different advantages and challenges technically and commercially. This paper presents the investigations on both designs for large SC generators from manufacturability and service perspectives.

Lignin carbon fiber: The path for quality

DOE PAGES

Yuan, Joshua S.; Li, Qiang; Ragauskas, Arthur J.

2017-03-01

Lignin represents an abundant biopolymer and a major waste from lignocellulosic processing plants, yet the utilization of lignin for fungible products remains one of the most challenging technical barriers for pulp mills and the modern biorefinery industry. In recent decades, lignin has been sought after as a precursor polymer for carbon fiber due to the high carbon content (up to 60%). Furthermore lignin carbon fiber is expected to be compatible with the market size of the pulp and paper industry and may have transformative impact on petroleum-based carbon fiber.

Two decades of research and monitoring of the northern spotted owl on private timberlands in the redwood region: What do we know and what challenges remain? In: Standiford, Richard B.; Weller, Theodore J.; Piirto, Douglas D.; Stuart, John D, technical coordinators

Treesearch

Lowell Diller; Keith Hamm; David Lamphear; Trent. McDonald

2012-01-01

Surveys for northern spotted owls on Green Diamond Resource Company's (formerly Simpson Timber Company) ownership in coastal northern California were initiated in 1989. The following year, a long-term demography study was initiated that has continued to the present time. A Habitat Conservation Plan was developed for the species in 1992 and numerous habitat studies...

Urology technical and non-technical skills development: the emerging role of simulation.

PubMed

Rashid, Prem; Gianduzzo, Troy R J

2016-04-01

To review the emerging role of technical and non-technical simulation in urological education and training. A review was conducted to examine the current role of simulation in urology training. A PUBMED search of the terms 'urology training', 'urology simulation' and 'urology education' revealed 11,504 titles. Three hundred and fifty-seven abstracts were identified as English language, peer reviewed papers pertaining to the role of simulation in urology and related topics. Key papers were used to explore themes. Some cross-referenced papers were also included. There is an ongoing need to ensure that training time is efficiently utilised while ensuring that optimal technical and non-technical skills are achieved. Changing working conditions and the need to minimise patient harm by inadvertent errors must be taken into account. Simulation models for specific technical aspects have been the mainstay of graduated step-wise low and high fidelity training. Whole scenario environments as well as non-technical aspects can be slowly incorporated into the curriculum. Doing so should also help define what have been challenging competencies to teach and evaluate. Dedicated time, resources and trainer up-skilling are important. Concurrent studies are needed to help evaluate the effectiveness of introducing step-wise simulation for technical and non-technical competencies. Simulation based learning remains the best avenue of progressing surgical education. Technical and non-technical simulation could be used in the selection process. There are good economic, logistic and safety reasons to pursue the process of ongoing development of simulation co-curricula. While the role of simulation is assured, its progress will depend on a structured program that takes advantage of what can be delivered via this medium. Overall, simulation can be developed further for urological training programs to encompass technical and non-technical skill development at all stages, including recertification. © 2015 The Authors BJU International © 2015 BJU International Published by John Wiley & Sons Ltd.

Using mixed methods research designs in health psychology: an illustrated discussion from a pragmatist perspective.

PubMed

Bishop, Felicity L

2015-02-01

To outline some of the challenges of mixed methods research and illustrate how they can be addressed in health psychology research. This study critically reflects on the author's previously published mixed methods research and discusses the philosophical and technical challenges of mixed methods, grounding the discussion in a brief review of methodological literature. Mixed methods research is characterized as having philosophical and technical challenges; the former can be addressed by drawing on pragmatism, the latter by considering formal mixed methods research designs proposed in a number of design typologies. There are important differences among the design typologies which provide diverse examples of designs that health psychologists can adapt for their own mixed methods research. There are also similarities; in particular, many typologies explicitly orient to the technical challenges of deciding on the respective timing of qualitative and quantitative methods and the relative emphasis placed on each method. Characteristics, strengths, and limitations of different sequential and concurrent designs are identified by reviewing five mixed methods projects each conducted for a different purpose. Adapting formal mixed methods designs can help health psychologists address the technical challenges of mixed methods research and identify the approach that best fits the research questions and purpose. This does not obfuscate the need to address philosophical challenges of mixing qualitative and quantitative methods. Statement of contribution What is already known on this subject? Mixed methods research poses philosophical and technical challenges. Pragmatism in a popular approach to the philosophical challenges while diverse typologies of mixed methods designs can help address the technical challenges. Examples of mixed methods research can be hard to locate when component studies from mixed methods projects are published separately. What does this study add? Critical reflections on the author's previously published mixed methods research illustrate how a range of different mixed methods designs can be adapted and applied to address health psychology research questions. The philosophical and technical challenges of mixed methods research should be considered together and in relation to the broader purpose of the research. © 2014 The British Psychological Society.

Health innovation for patient safety improvement.

PubMed

Sellappans, Renukha; Chua, Siew Siang; Tajuddin, Nur Amani Ahmad; Mei Lai, Pauline Siew

2013-01-01

Medication error has been identified as a major factor affecting patient safety. Many innovative efforts such as Computerised Physician Order Entry (CPOE), a Pharmacy Information System, automated dispensing machines and Point of Administration Systems have been carried out with the aim of improving medication safety. However, areas remain that require urgent attention. One main area will be the lack of continuity of care due to the breakdown of communication between multiple healthcare providers. Solutions may include consideration of "health smart cards" that carry vital patient medical information in the form of a "credit card" or use of the Malaysian identification card. However, costs and technical aspects associated with the implementation of this health smart card will be a significant barrier. Security and confidentiality, on the other hand, are expected to be of primary concern to patients. Challenges associated with the implementation of a health smart card might include physician buy-in for use in his or her everyday practice. Training and technical support should also be available to ensure the smooth implementation of this system. Despite these challenges, implementation of a health smart card moves us closer to seamless care in our country, thereby increasing the productivity and quality of healthcare.

Hand-held medical robots.

PubMed

Payne, Christopher J; Yang, Guang-Zhong

2014-08-01

Medical robots have evolved from autonomous systems to tele-operated platforms and mechanically-grounded, cooperatively-controlled robots. Whilst these approaches have seen both commercial and clinical success, uptake of these robots remains moderate because of their high cost, large physical footprint and long setup times. More recently, researchers have moved toward developing hand-held robots that are completely ungrounded and manipulated by surgeons in free space, in a similar manner to how conventional instruments are handled. These devices provide specific functions that assist the surgeon in accomplishing tasks that are otherwise challenging with manual manipulation. Hand-held robots have the advantages of being compact and easily integrated into the normal surgical workflow since there is typically little or no setup time. Hand-held devices can also have a significantly reduced cost to healthcare providers as they do not necessitate the complex, multi degree-of-freedom linkages that grounded robots require. However, the development of such devices is faced with many technical challenges, including miniaturization, cost and sterility, control stability, inertial and gravity compensation and robust instrument tracking. This review presents the emerging technical trends in hand-held medical robots and future development opportunities for promoting their wider clinical uptake.

Personalized therapeutic strategies for patients with retinitis pigmentosa.

PubMed

Zheng, Andrew; Li, Yao; Tsang, Stephen H

2015-03-01

Retinitis pigmentosa (RP) encompasses many different hereditary retinal degenerations that are caused by a vast array of different gene mutations and have highly variable disease presentations and severities. This heterogeneity poses a significant therapeutic challenge, although an answer may eventually be found through two recent innovations: induced pluripotent stem cells (iPSCs) and clustered regularly interspaced short palindromic repeats (CRISPR)/Cas genome editing. This review discusses the wide-ranging applications of iPSCs and CRISPR-including disease modelling, diagnostics and therapeutics - with an ultimate view towards understanding how these two technologies can come together to address disease heterogeneity and orphan genes in a novel personalized medicine platform. An extensive literature search was conducted in PubMed and Google Scholar, with a particular focus on high-impact research published within the last 1 - 2 years and centered broadly on the subjects of retinal gene therapy, iPSC-derived outer retina cells, stem cell transplantation and CRISPR/Cas gene editing. For the retinal pigment epithelium, autologous transplantation of gene-corrected grafts derived from iPSCs may well be technically feasible in the near future. Photoreceptor transplantation faces more significant unresolved technical challenges but remains an achievable, if more distant, goal given the rapid pace of advancements in the field.

Spatially explicit data: stewardship and ethical challenges in science.

PubMed

Hartter, Joel; Ryan, Sadie J; Mackenzie, Catrina A; Parker, John N; Strasser, Carly A

2013-09-01

Scholarly communication is at an unprecedented turning point created in part by the increasing saliency of data stewardship and data sharing. Formal data management plans represent a new emphasis in research, enabling access to data at higher volumes and more quickly, and the potential for replication and augmentation of existing research. Data sharing has recently transformed the practice, scope, content, and applicability of research in several disciplines, in particular in relation to spatially specific data. This lends exciting potentiality, but the most effective ways in which to implement such changes, particularly for disciplines involving human subjects and other sensitive information, demand consideration. Data management plans, stewardship, and sharing, impart distinctive technical, sociological, and ethical challenges that remain to be adequately identified and remedied. Here, we consider these and propose potential solutions for their amelioration.

Vocational and Technical Education in Lebanon: Strategic Issues and Challenges

ERIC Educational Resources Information Center

Karam, Gebran

2006-01-01

The current status of the Lebanese vocational and technical education (VTE) system is assessed and the strategic issues and challenges facing it are identified. In addition to the economic and social challenges that are common to many developing countries, the Lebanese system suffers from idiosyncratic problems, which may require innovative and…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsipis, K.

A method for verifying a cruise-missile agreement that would be acceptable to the military, industrial, and intelligence communities in both nations must be as unintrusive as possible, while remaining immune to cheating of any significance. This is the goal of the technical solutions outlined here. The elements of a verification regime described do not require routine, intrusive, on-site visits to naval vessels, aircraft, air bases, or weapons magazines where missiles may be stored. They do not interfere with the operational readiness of the missiles, and they protect legitimate military secrets of the inspected nation. If supported by competent national technicalmore » means of verification such as those both sides already employ, with a small number of on-site challenge inspections, a combination of technical solutions and procedures such as these could be effective. They would adequately safeguard the national security and sovereignty of the participating nations while providing policymakers with the option of a treaty that limits the number of long-range nuclear cruise missiles or eliminates them completely. As discussed, there are problems that remain to be addressed, but they should not be allowed to block a U.S.-Soviet agreement significantly reducing strategic nuclear arsenals.« less

Evaluation of partnership working in cities in phase IV of the WHO Healthy Cities Network.

PubMed

Lipp, Alistair; Winters, Tim; de Leeuw, Evelyne

2013-10-01

An intersectoral partnership for health improvement is a requirement of the WHO European Healthy Cities Network of municipalities. A review was undertaken in 59 cities based on responses to a structured questionnaire covering phase IV of the network (2003-2008). Cities usually combined formal and informal working partnerships in a pattern seen in previous phases. However, these encompassed more sectors than previously and achieved greater degrees of collaborative planning and implementation. Additional WHO technical support and networking in phase IV significantly enhanced collaboration with the urban planning sector. Critical success factors were high-level political commitment and a well-organized Healthy City office. Partnerships remain a successful component of Healthy City working. The core principles, purpose and intellectual rationale for intersectoral partnerships remain valid and fit for purpose. This applied to long-established phase III cities as well as newcomers to phase IV. The network, and in particular the WHO brand, is well regarded and encourages political and organizational engagement and is a source of support and technical expertise. A key challenge is to apply a more rigorous analytical framework and theory-informed approach to reviewing partnership and collaboration parameters.

Supersonics Project: Airport Noise Technical Challenge

NASA Technical Reports Server (NTRS)

Bridges, James E.

2008-01-01

This presentation gives an overview of the work being done under the Airport Noise Technical Challenge portion of the Supersonics Project in the Fundamental Aeronautics Program. The objective of the Challenge is to provide technology (e.g. low noise nozzle concepts) and engineering tools required for a viable supersonic aircraft. To accomplish this we have activities divided into Prediction, Diagnostics, and Engineering elements. Each of the tasks reviewed here have potential applications to work being done at other flight regimes and other aircraft and are of interest to the Acoustics Technical Working Group.

Anion exchange membrane fuel cells: Current status and remaining challenges

NASA Astrophysics Data System (ADS)

Gottesfeld, Shimshon; Dekel, Dario R.; Page, Miles; Bae, Chulsung; Yan, Yushan; Zelenay, Piotr; Kim, Yu Seung

2018-01-01

The anion exchange membrane fuel cell (AEMFC) is an attractive alternative to acidic proton exchange membrane fuel cells, which to date have required platinum-based catalysts, as well as acid-tolerant stack hardware. The AEMFC could use non-platinum-group metal catalysts and less expensive metal hardware thanks to the high pH of the electrolyte. Over the last decade, substantial progress has been made in improving the performance and durability of the AEMFC through the development of new materials and the optimization of system design and operation conditions. In this perspective article, we describe the current status of AEMFCs as having reached beginning of life performance very close to that of PEMFCs when using ultra-low loadings of Pt, while advancing towards operation on non-platinum-group metal catalysts alone. In the latter sections, we identify the remaining technical challenges, which require further research and development, focusing on the materials and operational factors that critically impact AEMFC performance and/or durability. These perspectives may provide useful insights for the development of next-generation of AEMFCs.

Anion exchange membrane fuel cells: Current status and remaining challenges

DOE PAGES

Gottesfeld, Shimshon; Dekel, Dario R.; Page, Miles; ...

2017-09-01

The anion exchange membrane fuel cell (AEMFC) is an attractive alternative to acidic proton exchange membrane fuel cells, which to date have required platinum-based catalysts, as well as acid-tolerant stack hardware. The AEMFC could use non-platinum-group metal catalysts and less expensive metal hardware thanks to the high pH of the electrolyte. Over the last decade, substantial progress has been made in improving the performance and durability of the AEMFC through the development of new materials and the optimization of system design and operation conditions. Here in this perspective article, we describe the current status of AEMFCs as having reached beginningmore » of life performance very close to that of PEMFCs when using ultra-low loadings of Pt, while advancing towards operation on non-platinum-group metal catalysts alone. In the latter sections, we identify the remaining technical challenges, which require further research and development, focusing on the materials and operational factors that critically impact AEMFC performance and/or durability. Finally, these perspectives may provide useful insights for the development of next-generation of AEMFCs.« less

Challenges and Emerging Technologies within the Field of Pediatric Actigraphy

PubMed Central

Galland, Barbara; Meredith-Jones, Kim; Terrill, Philip; Taylor, Rachael

2014-01-01

Actigraphy as an objective measure of sleep and wakefulness in infants and children has gained popularity over the last 20 years. However, the field lacks published guidelines for sleep–wake identification within pediatric age groups. The scoring rules vary greatly and although sensitivity (sleep agreement with polysomnography) is usually high, a significant limitation remains in relation to specificity (wake agreement). Furthermore, accurate algorithm output and sleep–wake summaries usually require prior entry from daily logs of sleep–wake periods and artifact-related information (e.g., non-wear time), involving significant parent co-operation. Scoring criteria for daytime naps remains an unexplored area. Many of the problems facing accuracy of measurement are inherent within the field of actigraphy itself, particularly where sleep periods containing significant movements are erroneously classified as wake, and within quiet wakefulness when no movements are detected, erroneously classified as sleep. We discuss the challenges of actigraphy for pediatric sleep, briefly describe the technical basis and consider a number of technological approaches that may facilitate improved classification of errors in sleep–wake discrimination. PMID:25191278

[Airway management in Ludwig's angina - a challenge: case report].

PubMed

Fellini, Roberto Taboada; Volquind, Daniel; Schnor, Otávio Haygert; Angeletti, Marcelo Gustavo; Souza, Olívia Egger de

Ludwig's angina (LA) is an infection of the submandibular space, first described by Wilhelm Frederick von Ludwig in 1836. It represents an entity difficult to manage due to the rapid progression and difficulty in maintaining airway patency, a major challenge in medical practice, resulting in asphyxia and death in 8-10% of patients. Describe a case of a patient with Ludwig's angina undergoing surgery, with emphasis on airway management, in addition to reviewing the articles published in the literature on this topic. Male patient, 21 years, drug addict, admitted by the emergency department and diagnosed with LA. Difficult airway was identified during the anesthetic examination. In additional tests, significant deviation from the tracheal axis was seen. Undergoing bilateral thoracoscopic pleural drainage, we opted for airway management through tracheal intubation using fiberoptic bronchoscopy, and balanced general anesthesia was proposed. There were no complications during the surgical-anesthetic act. After the procedure, the patient remained intubated and mechanically ventilated in the intensive care unit. Airway management in patients with Ludwig's angina remains challenging. The choice of the safest technique should be based on clinical signs, technical conditions available, and the urgent need to preserve the patient's life. Copyright © 2015 Sociedade Brasileira de Anestesiologia. Publicado por Elsevier Editora Ltda. All rights reserved.

Criteria and Planning Guidance for Ex-Plant Harvesting to Support Subsequent License Renewal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramuhalli, Pradeep; Devanathan, Ram; Meyer, Ryan M.

As U.S. nuclear power plants look to subsequent license renewal (SLR) to operate for a 20-year period beyond 60 years, the U.S. Nuclear Regulatory Commission and the industry will be addressing technical issues around the capability of long-lived passive components to meet their functionality objectives. A key challenge will be to better understand likely materials degradation mechanisms in these components and their impacts on component functionality and margins to safety. Research addressing many of the remaining technical gaps in these areas for SLR may greatly benefit from materials sampled from plants (decommissioned or operating). Because of the cost and inefficiencymore » of piecemeal sampling, there is a need for a strategic and systematic approach to sampling materials from structures, systems, and components (SSC) in both operating and decommissioned plants. This document describes a potential approach for sampling (harvesting) materials that focuses on prioritizing materials for sampling using a number of criteria. These criteria are based on an evaluation of technical gaps identified in the literature, research needs to address these technical gaps, and lessons learned from previous harvesting campaigns. The document also describes a process for planning future harvesting campaigns; such a plan would include an understanding of the harvesting priorities, available materials, and the planned use of the materials to address the technical gaps.« less

Chemical Sensors Based on Metal Oxide Nanostructures

NASA Technical Reports Server (NTRS)

Hunter, Gary W.; Xu, Jennifer C.; Evans, Laura J.; VanderWal, Randy L.; Berger, Gordon M.; Kulis, Mike J.; Liu, Chung-Chiun

2006-01-01

This paper is an overview of sensor development based on metal oxide nanostructures. While nanostructures such as nanorods show significan t potential as enabling materials for chemical sensors, a number of s ignificant technical challenges remain. The major issues addressed in this work revolve around the ability to make workable sensors. This paper discusses efforts to address three technical barriers related t o the application of nanostructures into sensor systems: 1) Improving contact of the nanostructured materials with electrodes in a microse nsor structure; 2) Controling nanostructure crystallinity to allow co ntrol of the detection mechanism; and 3) Widening the range of gases that can be detected by using different nanostructured materials. It is concluded that while this work demonstrates useful tools for furt her development, these are just the beginning steps towards realizati on of repeatable, controlled sensor systems using oxide based nanostr uctures.

Human Exploration and Development in the Solar System

NASA Astrophysics Data System (ADS)

Mendell, Wendell

2017-05-01

Emergence of ballistic missile technology after the Second World War enabled human flight into Earth's orbit, fueling the imagination of those fascinated with science, technology, exploration, and adventure. The performance of astronauts in the early flights assuaged concerns about the functioning of "the human system" in the absence of normal gravity. However, researchers in space medicine have observed degradation of crews after longer exposure to the space environment and have developed countermeasures for most of them, although significant challenges remain. With the dawn of the 21st century, well-financed and technically competent commercial entities began to provide more affordable alternatives to historically expensive and risk-averse government-funded programs. Space's growing accessibility has encouraged entrepreneurs to pursue plans for potentially autarkic communities beyond Earth, exploiting natural resources on other worlds. Should such dreams prove to be technically and economically feasible, a new era will open for humanity with concomitant societal issues of a revolutionary nature.

The Development of Metal Oxide Chemical Sensing Nanostructures

NASA Technical Reports Server (NTRS)

Hunter, G. W.; VanderWal,R. L.; Xu, J. C.; Evans, L. J.; Berger, G. M.; Kulis, M. J.

2008-01-01

This paper discusses sensor development based on metal oxide nanostructures and microsystems technology. While nanostructures such as nanowires show significant potential as enabling materials for chemical sensors, a number of significant technical challenges remain. This paper discusses development to address each of these technical barriers: 1) Improved contact and integration of the nanostructured materials with microsystems in a sensor structure; 2) Control of nanostructure crystallinity to allow control of the detection mechanism; and 3) Widening the range of gases that can be detected by fabricating multiple nanostructured materials. A sensor structure composed of three nanostructured oxides aligned on a single microsensor has been fabricated and tested. Results of this testing are discussed and future development approaches are suggested. It is concluded that while this work lays the foundation for further development, these are the beginning steps towards realization of repeatable, controlled sensor systems using oxide based nanostructures.

Endoscopic Therapy of Early Carcinoma of the Oesophagus

PubMed Central

Knabe, Mate; May, Andrea; Ell, Christian

2015-01-01

Summary Background Oesophageal cancer is a comparatively rare disease in the Western world. Prognosis is highly dependent on the choice of treatment. Early stages can be treated by endoscopic resection, whereas surgery needs to be performed in the case of advanced carcinomas. Technical progress has enabled high-definition endoscopes and technical add-ons which help the endoscopist in finding fine irregularities in the oesophageal mucosa, though interpretation still remains challenging. Methods In this review, we discuss both novel and old diagnostic procedures and their value, as well as the current recommendations for the diagnosis and treatment of early oesophageal carcinomas. The database of PubMed and Medline was searched and analysed to provide all relevant literature for this review. Results and Conclusion Endoscopic resection is the therapy of choice in early oesophageal cancer. In case of adenocarcinoma it is mandatory to perform subsequent ablation of all residual Barrett's mucosa to avoid metachronous lesions. PMID:26989386

Management of bisphosphonate-related osteonecrosis of the jaw with a platelet-rich fibrin membrane: technical report.

PubMed

Soydan, Sıdıka Sinem; Uckan, Sina

2014-02-01

Bisphosphonate-related osteonecrosis of the jaw (BRONJ) is a challenging complication resulting from the long-term application of bisphosphonates. In most cases, BRONJ occurs after a surgical procedure involving the jawbone. Currently, the management of BRONJ remains controversial, and there is no definitive treatment other than palliative methods. Platelet-rich fibrin (PRF) represents a relatively new biotechnology for the stimulation and acceleration of tissue healing and bone regeneration. This technical note describes the total closure of moderate bone exposure in persistent BRONJ in 2 weeks with a double-layer PRF membrane. PRF may stimulate gingival healing and act as a barrier membrane between the alveolar bone and the oral cavity. PRF may offer a fast, easy, and effective alternative method for the closure of bone exposure in BRONJ. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Technical Writing Teachers and the Challenges of Desktop Publishing.

ERIC Educational Resources Information Center

Kalmbach, James

1988-01-01

Argues that technical writing teachers must understand desktop publishing. Discusses the strengths that technical writing teachers bring to desktop publishing, and the impact desktop publishing will have on technical writing courses and programs. (ARH)

Research Update: The materials genome initiative: Data sharing and the impact of collaborative ab initio databases

DOE PAGES

Jain, Anubhav; Persson, Kristin A.; Ceder, Gerbrand

2016-03-24

Materials innovations enable new technological capabilities and drive major societal advancements but have historically required long and costly development cycles. The Materials Genome Initiative (MGI) aims to greatly reduce this time and cost. Here, we focus on data reuse in the MGI and, in particular, discuss the impact of three different computational databases based on density functional theory methods to the research community. Finally, we discuss and provide recommendations on technical aspects of data reuse, outline remaining fundamental challenges, and present an outlook on the future of MGI's vision of data sharing.

A Critical Appraisal of RAFT-Mediated Polymerization-Induced Self-Assembly

PubMed Central

2016-01-01

Recently, polymerization-induced self-assembly (PISA) has become widely recognized as a robust and efficient route to produce block copolymer nanoparticles of controlled size, morphology, and surface chemistry. Several reviews of this field have been published since 2012, but a substantial number of new papers have been published in the last three years. In this Perspective, we provide a critical appraisal of the various advantages offered by this approach, while also pointing out some of its current drawbacks. Promising future research directions as well as remaining technical challenges and unresolved problems are briefly highlighted. PMID:27019522

Flow Changes after Endovascular Treatment of a Wide-Neck Anterior Communicating Artery Aneurysm by using X-configured Kissing Stents (Cross-Kissing Stents) Technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zelenak, Kamil, E-mail: zelenak@unm.sk; Zelenakova, Jana; DeRiggo, Julius

2011-12-15

Endovascular treatment for a wide-neck anterior communicating artery (AcomA) aneurysm remains technically challenging. Stent-assisted embolization has been proposed as an alternative of treatment of complex aneurysms. The X-configuration double-stent-assisted technique was used to achieve successful coiling of wide-neck AcomA aneurysm. Implanted stent can alter intra-arterial flow. Follow-up angiograms 4 months later showed flow changes due to used X-technique of stents implantation and filling of the anterior cerebral artery from the opposite internal carotid artery.

Transsphenoidal surgery in patients with acromegaly: operative strategies for overcoming technically challenging anatomical variations.

PubMed

Zada, Gabriel; Cavallo, Luigi M; Esposito, Felice; Fernandez-Jimenez, Julio Cesar; Tasiou, Anastasia; De Angelis, Michelangelo; Cafiero, Tullio; Cappabianca, Paolo; Laws, Edward R

2010-10-01

In addition to difficulties with anesthetic and medical management, transsphenoidal operations in patients with longstanding acromegaly are associated with inherent intraoperative challenges because of anatomical variations that occur frequently in these patients. The object of this study was to review the overall safety profile and anatomical/technical challenges associated with transsphenoidal surgery in patients with acromegaly. The authors performed a retrospective analysis of 169 patients who underwent endoscopic transsphenoidal operations for growth hormone-secreting adenomas to assess the incidence of surgical complications. A review of frequently occurring anatomical challenges and operative strategies employed during each phase of the operation to address these particular issues was performed. Of 169 cases reviewed, there was no perioperative mortality. Internal carotid artery injury occurred in 1 patient (0.6%) with complex sinus anatomy, who remained neurologically intact following endovascular unilateral carotid artery occlusion. Other complications included: significant postoperative epistaxis (5 patients [3%]), transient diabetes insipidus (5 patients [3%]), delayed symptomatic hyponatremia (4 patients [2%]), CSF leak (2 patients [1%]), and pancreatitis (1 patient [0.6%]). Preoperative considerations in patients with acromegaly should include a cardiopulmonary evaluation and planning regarding intubation and other aspects of the anesthetic technique. During the nasal phase of the transsphenoidal operation, primary challenges include maintaining adequate visualization and hemostasis, which is frequently compromised by redundant, edematous nasal mucosa and bony hypertrophy of the septum and the nasal turbinates. During the sphenoid phase, adequate bony removal, optimization of working space, and correlation of imaging studies to intraoperative anatomy are major priorities. The sellar phase is frequently challenged by increased sellar floor thickness, distinct patterns of tumor extension and bony invasion, and anatomical variations in the caliber and course of the internal carotid artery. Specific operative techniques for addressing each of these intraoperative challenges are discussed. Transsphenoidal surgery in patients with longstanding acromegaly frequently poses greater challenges than operations for other types of sellar lesions, yet these challenges may be safely and effectively overcome with the anticipation of specific issues and implementation of various intraoperative techniques.

Advances in addressing technical challenges of point-of-care diagnostics in resource-limited settings

PubMed Central

Wang, ShuQi; Lifson, Mark A.; Inci, Fatih; Liang, Li-Guo; Sheng, Ye-Feng; Demirci, Utkan

2016-01-01

The striking prevalence of HIV, TB and malaria, as well as outbreaks of emerging infectious diseases, such as influenza A (H7N9), Ebola and MERS, poses great challenges for patient care in resource-limited settings (RLS). However, advanced diagnostic technologies cannot be implemented in RLS largely due to economic constraints. Simple and inexpensive point-of-care (POC) diagnostics, which rely less on environmental context and operator training, have thus been extensively studied to achieve early diagnosis and treatment monitoring in non-laboratory settings. Despite great input from material science, biomedical engineering and nanotechnology for developing POC diagnostics, significant technical challenges are yet to be overcome. Summarized here are the technical challenges associated with POC diagnostics from a RLS perspective and the latest advances in addressing these challenges are reviewed. PMID:26777725

Magnesium batteries: Current state of the art, issues and future perspectives.

PubMed

Mohtadi, Rana; Mizuno, Fuminori

2014-01-01

"...each metal has a certain power, which is different from metal to metal, of setting the electric fluid in motion..." Count Alessandro Volta. Inspired by the first rechargeable magnesium battery prototype at the dawn of the 21st century, several research groups have embarked on a quest to realize its full potential. Despite the technical accomplishments made thus far, challenges, on the material level, hamper the realization of a practical rechargeable magnesium battery. These are marked by the absence of practical cathodes, appropriate electrolytes and extremely sluggish reaction kinetics. Over the past few years, an increased interest in this technology has resulted in new promising materials and innovative approaches aiming to overcome the existing hurdles. Nonetheless, the current challenges call for further dedicated research efforts encompassing fundamental understanding of the core components and how they interact with each other to offering new innovative solutions. In this review, we seek to highlight the most recent developments made and offer our perspectives on how to overcome some of the remaining challenges.

Modeling the Effects of Turbulence in Rotating Detonation Engines

NASA Astrophysics Data System (ADS)

Towery, Colin; Smith, Katherine; Hamlington, Peter; van Schoor, Marthinus; TESLa Team; Midé Team

2014-03-01

Propulsion systems based on detonation waves, such as rotating and pulsed detonation engines, have the potential to substantially improve the efficiency and power density of gas turbine engines. Numerous technical challenges remain to be solved in such systems, however, including obtaining more efficient injection and mixing of air and fuels, more reliable detonation initiation, and better understanding of the flow in the ejection nozzle. These challenges can be addressed using numerical simulations. Such simulations are enormously challenging, however, since accurate descriptions of highly unsteady turbulent flow fields are required in the presence of combustion, shock waves, fluid-structure interactions, and other complex physical processes. In this study, we performed high-fidelity three dimensional simulations of a rotating detonation engine and examined turbulent flow effects on the operation, performance, and efficiency of the engine. Along with experimental data, these simulations were used to test the accuracy of commonly-used Reynolds averaged and subgrid-scale turbulence models when applied to detonation engines. The authors gratefully acknowledge the support of the Defense Advanced Research Projects Agency (DARPA).

Crowdsourcing in biomedicine: challenges and opportunities.

PubMed

Khare, Ritu; Good, Benjamin M; Leaman, Robert; Su, Andrew I; Lu, Zhiyong

2016-01-01

The use of crowdsourcing to solve important but complex problems in biomedical and clinical sciences is growing and encompasses a wide variety of approaches. The crowd is diverse and includes online marketplace workers, health information seekers, science enthusiasts and domain experts. In this article, we review and highlight recent studies that use crowdsourcing to advance biomedicine. We classify these studies into two broad categories: (i) mining big data generated from a crowd (e.g. search logs) and (ii) active crowdsourcing via specific technical platforms, e.g. labor markets, wikis, scientific games and community challenges. Through describing each study in detail, we demonstrate the applicability of different methods in a variety of domains in biomedical research, including genomics, biocuration and clinical research. Furthermore, we discuss and highlight the strengths and limitations of different crowdsourcing platforms. Finally, we identify important emerging trends, opportunities and remaining challenges for future crowdsourcing research in biomedicine. Published by Oxford University Press 2015. This work is written by US Government employees and is in the public domain in the US.

Options for Synthetic DNA Order Screening, Revisited.

PubMed

DiEuliis, Diane; Carter, Sarah R; Gronvall, Gigi Kwik

2017-01-01

Gene synthesis providers affiliated with the International Gene Synthesis Consortium (IGSC) voluntarily screen double-stranded DNA (dsDNA) synthesis orders over 200 bp to check for matches to regulated pathogens and to screen customers. Questions have been raised, however, about the continuing feasibility and effectiveness of screening. There are technical challenges (e.g., oligonucleotides and tracts of DNA less than 200 bp are not screened) and corporate challenges (e.g., the costs of screening are high, but other costs are dropping, so screening is an increasing portion of operating costs). In this article, we describe tangible actions that should be taken to (i) preserve the effectiveness of DNA order screening as a security tool and (ii) develop additional mechanisms to increase the safety and security of DNA synthesis technologies. Screening is not a perfect solution to DNA synthesis security challenges, but we believe it is still a valuable addition to security, and it can remain effective for some time.

Digital Pharmacovigilance and Disease Surveillance: Combining Traditional and Big-Data Systems for Better Public Health.

PubMed

Salathé, Marcel

2016-12-01

The digital revolution has contributed to very large data sets (ie, big data) relevant for public health. The two major data sources are electronic health records from traditional health systems and patient-generated data. As the two data sources have complementary strengths-high veracity in the data from traditional sources and high velocity and variety in patient-generated data-they can be combined to build more-robust public health systems. However, they also have unique challenges. Patient-generated data in particular are often completely unstructured and highly context dependent, posing essentially a machine-learning challenge. Some recent examples from infectious disease surveillance and adverse drug event monitoring demonstrate that the technical challenges can be solved. Despite these advances, the problem of verification remains, and unless traditional and digital epidemiologic approaches are combined, these data sources will be constrained by their intrinsic limits. © The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America.

Community Cloud Computing

NASA Astrophysics Data System (ADS)

Marinos, Alexandros; Briscoe, Gerard

Cloud Computing is rising fast, with its data centres growing at an unprecedented rate. However, this has come with concerns over privacy, efficiency at the expense of resilience, and environmental sustainability, because of the dependence on Cloud vendors such as Google, Amazon and Microsoft. Our response is an alternative model for the Cloud conceptualisation, providing a paradigm for Clouds in the community, utilising networked personal computers for liberation from the centralised vendor model. Community Cloud Computing (C3) offers an alternative architecture, created by combing the Cloud with paradigms from Grid Computing, principles from Digital Ecosystems, and sustainability from Green Computing, while remaining true to the original vision of the Internet. It is more technically challenging than Cloud Computing, having to deal with distributed computing issues, including heterogeneous nodes, varying quality of service, and additional security constraints. However, these are not insurmountable challenges, and with the need to retain control over our digital lives and the potential environmental consequences, it is a challenge we must pursue.

The environmental-data automated track annotation (Env-DATA) system: linking animal tracks with environmental data

USGS Publications Warehouse

Dodge, Somayeh; Bohrer, Gil; Weinzierl, Rolf P.; Davidson, Sarah C.; Kays, Roland; Douglas, David C.; Cruz, Sebastian; Han, J.; Brandes, David; Wikelski, Martin

2013-01-01

The movement of animals is strongly influenced by external factors in their surrounding environment such as weather, habitat types, and human land use. With advances in positioning and sensor technologies, it is now possible to capture animal locations at high spatial and temporal granularities. Likewise, scientists have an increasing access to large volumes of environmental data. Environmental data are heterogeneous in source and format, and are usually obtained at different spatiotemporal scales than movement data. Indeed, there remain scientific and technical challenges in developing linkages between the growing collections of animal movement data and the large repositories of heterogeneous remote sensing observations, as well as in the developments of new statistical and computational methods for the analysis of movement in its environmental context. These challenges include retrieval, indexing, efficient storage, data integration, and analytical techniques.

SSME to RS-25: Challenges of Adapting a Heritage Engine to a New Vehicle Architecture

NASA Technical Reports Server (NTRS)

Ballard, Richard O.

2015-01-01

Following the cancellation of the Constellation program and retirement of the Space Shuttle, NASA initiated the Space Launch System (SLS) program to provide next-generation heavy lift cargo and crew access to space. A key constituent of the SLS architecture is the RS-25 engine, also known as the Space Shuttle Main Engine (SSME). The RS-25 was selected to serve as the main propulsion system for the SLS core stage in conjunction with the solid rocket boosters. This selection was largely based on the maturity and extensive experience gained through 135 missions, 3000+ ground tests, and over a million seconds total accumulated hot-fire time. In addition, there were also over a dozen functional flight assets remaining from the Space Shuttle program that could be leveraged to support the first four flights. However, while the RS-25 is a highly mature system, simply unbolting it from the Space Shuttle boat-tail and installing it on the new SLS vehicle is not a "plug-and-play" operation. In addition to numerous technical integration details involving changes to significant areas such as the environments, interface conditions, technical performance requirements, operational constraints and so on, there were other challenges to be overcome in the area of replacing the obsolete engine control system (ECS). While the magnitude of accomplishing this effort was less than that needed to develop and field a new clean-sheet engine system, the path to the first flight of SLS has not been without unexpected challenges.

Teaching Intracultural and Intercultural Communication: A Critique and Suggested Method.

ERIC Educational Resources Information Center

DeVoss, Danielle; Jasken, Julia; Hayden, Dawn

2002-01-01

Summarizes recent literature about the importance of paying attention to intercultural communication. Analyzes the productive approaches in popular business and technical communication textbooks. Presents five challenges for business and technical communication teachers to consider. Includes teaching modules that address these challenges. Notes…

Proinflammatory Stem Cell Signaling in Cardiac Ischemia

PubMed Central

Herrmann, Jeremy L.; Markel, Troy A.; Abarbanell, Aaron M.; Weil, Brent R.; Wang, Meijing; Wang, Yue; Tan, Jiangning

2009-01-01

Abstract Cardiovascular disease remains a leading cause of mortality in developed nations, despite continued advancement in modern therapy. Progenitor and stem cell–based therapy is a novel treatment for cardiovascular disease, and modest benefits in cardiac recovery have been achieved in small clinical trials. This therapeutic modality remains challenged by limitations of low donor-cell survival rates, transient recovery of cardiac function, and the technical difficulty of applying directed cell therapy. Understanding the signaling mechanisms involved in the stem cell response to ischemia has revealed opportunities to modify directly aspects of these pathways to improve their cardioprotective abilities. This review highlights general considerations of stem cell therapy for cardiac disease, reviews the major proinflammatory signaling pathways of mesenchymal stem cells, and reviews ex vivo modifications of stem cells based on these pathways. Antioxid. Redox Signal. 11, 1883–1896. PMID:19187005

Technical challenges involved in supporting the Lambda Point Experiment

NASA Technical Reports Server (NTRS)

Petrac, D.; Israelsson, U.; Otth, D.; Simmons, L.; Staats, J.; Thompson, A.

1990-01-01

The Lambda Point Experiment (LPE) is one of the instruments included in the U.S. Microgravity Payload Mission 1 planned for one of the Space Shuttle flights in 1992. The objective of the experiment is to measure the heat capacity of liquid helium within a narrow interval around the transition between superfluid and normal helium (the lambda point) with an unprecedented temperature resolution of about 10 to the -10th. Multiple technical challenges are presented in the areas of structural support, safety analysis, and modal frequency tests. This paper describes the technical challenges of JPL's multidisciplinary involvement in support of these experiments in microgravity.

Translating Technical Support Into Country Action: The Role of the Interagency Task Team on the Prevention and Treatment of HIV Infection in Pregnant Women, Mothers, and Children in the Global Plan Era.

PubMed

Luo, Chewe; Hirnschall, Gottfried; Rodrigues, Jessica; Romano, Sostena; Essajee, Shaffiq; Rogers, Braeden; McCarthy, Elizabeth; Mwango, Albert; Sangrujee, Nalinee; Adler, Michelle R; Houston, James C; Langa, Judite O; Urso, Marilena; Bolu, Omotayo; Tene, Gilbert; Elat Nfetam, Jean B; Kembou, Etienne; Phelps, Benjamin R

2017-05-01

While the Interagency Task Team on the Prevention and Treatment of HIV Infection in Pregnant Women, Mothers, and Children (IATT) partnership existed before the Global Plan Towards the Elimination of New HIV Infections Among Children by 2015 and Keeping Their Mothers Alive (Global Plan), its reconfiguration was critical to coordinating provision of technical assistance that positively influenced country decision-making and program performance. This article describes how the Global Plan anchored the work of the IATT and, in turn, how the IATT's technical assistance helped to accelerate achievement of the Global Plan targets and milestones. The technical assistance that will be discussed addressed a broad range of priority actions and milestones described in the Global Plan: (1) planning for and implementing Option B+; (2) strengthening monitoring and evaluation systems; (3) translating evidence into action and advocacy; and (4) promoting community engagement. This article also reviews the ongoing challenges and opportunities of providing technical assistance in a rapidly evolving environment that calls for ever more flexible and contextualized responses. The effectiveness of technical assistance facilitated by the IATT was defined by its timeliness, evidence base, and unique global perspective that built on the competencies of its partners and promoted synergies across program areas. Reaching the final goal of eliminating vertical transmission of HIV infection and achieving an AIDS-free generation in countries with the highest HIV burden requires that the IATT partnership and technical assistance remain responsive to country-specific needs while aligning with the current programmatic reality and new global goals such as the Sustainable Development Goals and 90-90-90 targets.

Uganda's National Transmission Backbone Infrastructure Project: Technical Challenges and the Way Forward

NASA Astrophysics Data System (ADS)

Bulega, T.; Kyeyune, A.; Onek, P.; Sseguya, R.; Mbabazi, D.; Katwiremu, E.

2011-10-01

Several publications have identified technical challenges facing Uganda's National Transmission Backbone Infrastructure project. This research addresses the technical limitations of the National Transmission Backbone Infrastructure project, evaluates the goals of the project, and compares the results against the technical capability of the backbone. The findings of the study indicate a bandwidth deficit, which will be addressed by using dense wave division multiplexing repeaters, leasing bandwidth from private companies. Microwave links for redundancy, a Network Operation Center for operation and maintenance, and deployment of wireless interoperability for microwave access as a last-mile solution are also suggested.

Surgical timing after chemoradiotherapy for rectal cancer, analysis of technique (STARRCAT): results of a feasibility multi-centre randomized controlled trial.

PubMed

Foster, J D; Ewings, P; Falk, S; Cooper, E J; Roach, H; West, N P; Williams-Yesson, B A; Hanna, G B; Francis, N K

2016-10-01

The optimal time of rectal resection after long-course chemoradiotherapy (CRT) remains unclear. A feasibility study was undertaken for a multi-centre randomized controlled trial evaluating the impact of the interval after chemoradiotherapy on the technical complexity of surgery. Patients with rectal cancer were randomized to either a 6- or 12-week interval between CRT and surgery between June 2012 and May 2014 (ISRCTN registration number: 88843062). For blinded technical complexity assessment, the Observational Clinical Human Reliability Analysis technique was used to quantify technical errors enacted within video recordings of operations. Other measured outcomes included resection completeness, specimen quality, radiological down-staging, tumour cell density down-staging and surgeon-reported technical complexity. Thirty-one patients were enrolled: 15 were randomized to 6 and 16-12 weeks across 7 centres. Fewer eligible patients were identified than had been predicted. Of 23 patients who underwent resection, mean 12.3 errors were observed per case at 6 weeks vs. 10.7 at 12 weeks (p = 0.401). Other measured outcomes were similar between groups. The feasibility of measurement of operative performance of rectal cancer surgery as an endpoint was confirmed in this exploratory study. Recruitment of sufficient numbers of patients represented a challenge, and a proportion of patients did not proceed to resection surgery. These results suggest that interval after CRT may not substantially impact upon surgical technical performance.

Structured light optical microscopy for three-dimensional reconstruction of technical surfaces

NASA Astrophysics Data System (ADS)

Kettel, Johannes; Reinecke, Holger; Müller, Claas

2016-04-01

In microsystems technology quality control of micro structured surfaces with different surface properties is playing an ever more important role. The process of quality control incorporates three-dimensional (3D) reconstruction of specularand diffusive reflecting technical surfaces. Due to the demand on high measurement accuracy and data acquisition rates, structured light optical microscopy has become a valuable solution to solve this problem providing high vertical and lateral resolution. However, 3D reconstruction of specular reflecting technical surfaces still remains a challenge to optical measurement principles. In this paper we present a measurement principle based on structured light optical microscopy which enables 3D reconstruction of specular- and diffusive reflecting technical surfaces. It is realized using two light paths of a stereo microscope equipped with different magnification levels. The right optical path of the stereo microscope is used to project structured light onto the object surface. The left optical path is used to capture the structured illuminated object surface with a camera. Structured light patterns are generated by a Digital Light Processing (DLP) device in combination with a high power Light Emitting Diode (LED). Structured light patterns are realized as a matrix of discrete light spots to illuminate defined areas on the object surface. The introduced measurement principle is based on multiple and parallel processed point measurements. Analysis of the measured Point Spread Function (PSF) by pattern recognition and model fitting algorithms enables the precise calculation of 3D coordinates. Using exemplary technical surfaces we demonstrate the successful application of our measurement principle.

Changes in dive profiles as an indicator of feeding success in king and Adélie penguins

NASA Astrophysics Data System (ADS)

Bost, C. A.; Handrich, Y.; Butler, P. J.; Fahlman, A.; Halsey, L. G.; Woakes, A. J.; Ropert-Coudert, Y.

2007-02-01

Determining when and how deep avian divers feed remains a challenge despite technical advances. Systems that record oesophageal temperature are able to determine rate of prey ingestion with a high level of accuracy but technical problems still remain to be solved. Here we examine the validity of using changes in depth profiles to infer feeding activity in free-ranging penguins, as more accessible proxies of their feeding success. We used oesophageal temperature loggers with fast temperature sensors, deployed in tandem with time-depth recorders, on king and Adélie penguins. In the king penguin, a high correspondence was found between the number of ingestions recorded per dive and the number of wiggles during the bottom and the ascent part of the dives. In the Adélie penguins, which feed on smaller prey, the number of large temperature drops was linearly related to the number of undulations per dive. The analysis of change in depth profiles from high-resolution time-depth recorders can provide key information to enhance the study of feeding rate and foraging success of these predators. Such potential is especially relevant in the context of using Southern marine top predators to study change in availability of marine resources.

A Novel Model for Teaching Primary Care in a Community Practice Setting: Tufts at Tech Community Veterinary Clinic.

PubMed

McCobb, Emily; Rozanski, Elizabeth A; Malcolm, Elizabeth L; Wolfus, Gregory; Rush, John E

Providing veterinary students with opportunities to develop clinical skills in a realistic, hands-on environment remains a challenge for veterinary education. We have developed a novel approach to teaching clinical medicine to fourth-year veterinary students and technical high school students via development of a primary care clinic embedded within a technical high school. The primary care clinic targets an underserved area of the community, which includes many of the participating high school students. Support from the veterinary community for the project has been strong as a result of communication, the opportunity for veterinarians to volunteer in the clinic, and the careful targeting of services. Benefits to veterinary students include the opportunity to build clinical competencies and confidence, as well as the exposure to a diverse client population. The financial model of the clinic is described and initial data on outcomes for case load, clinic income, veterinary student evaluations, and high school students' success in passing the veterinary assisting examination are reported. This clinical model, involving a partnership between a veterinary school and a technical high school, may be adoptable to other clinical teaching situations.

Refining each process step to accelerate the development of biorefineries

DOE PAGES

Chandra, Richard P.; Ragauskas, Art J.

2016-06-21

Research over the past decade has been mainly focused on overcoming hurdles in the pretreatment, enzymatic hydrolysis, and fermentation steps of biochemical processing. Pretreatments have improved significantly in their ability to fractionate and recover the cellulose, hemicellulose, and lignin components of biomass while producing substrates containing carbohydrates that can be easily broken down by hydrolytic enzymes. There is a rapid movement towards pretreatment processes that incorporate mechanical treatments that make use of existing infrastructure in the pulp and paper industry, which has experienced a downturn in its traditional markets. Enzyme performance has also made great strides with breakthrough developments inmore » nonhydrolytic protein components, such as lytic polysaccharide monooxygenases, as well as the improvement of enzyme cocktails.The fermentability of pretreated and hydrolyzed sugar streams has been improved through strategies such as the use of reducing agents for detoxification, strain selection, and strain improvements. Although significant progress has been made, tremendous challenges still remain to advance each step of biochemical conversion, especially when processing woody biomass. In addition to technical and scale-up issues within each step of the bioconversion process, biomass feedstock supply and logistics challenges still remain at the forefront of biorefinery research.« less

Technical documentation challenges in aviation maintenance : a proceedings report.

DOT National Transportation Integrated Search

2012-11-01

The 2012 Technical Documentation workshop addressed both problems and solutions associated with technical : documentation for maintenance. These issues are known to cause errors, rework, maintenance delays, other : safety hazards, and FAA administrat...

Text mining for adverse drug events: the promise, challenges, and state of the art.

PubMed

Harpaz, Rave; Callahan, Alison; Tamang, Suzanne; Low, Yen; Odgers, David; Finlayson, Sam; Jung, Kenneth; LePendu, Paea; Shah, Nigam H

2014-10-01

Text mining is the computational process of extracting meaningful information from large amounts of unstructured text. It is emerging as a tool to leverage underutilized data sources that can improve pharmacovigilance, including the objective of adverse drug event (ADE) detection and assessment. This article provides an overview of recent advances in pharmacovigilance driven by the application of text mining, and discusses several data sources-such as biomedical literature, clinical narratives, product labeling, social media, and Web search logs-that are amenable to text mining for pharmacovigilance. Given the state of the art, it appears text mining can be applied to extract useful ADE-related information from multiple textual sources. Nonetheless, further research is required to address remaining technical challenges associated with the text mining methodologies, and to conclusively determine the relative contribution of each textual source to improving pharmacovigilance.

Dynamic Tunneling Junctions at the Atomic Intersection of Two Twisted Graphene Edges.

PubMed

Bellunato, Amedeo; Vrbica, Sasha D; Sabater, Carlos; de Vos, Erik W; Fermin, Remko; Kanneworff, Kirsten N; Galli, Federica; van Ruitenbeek, Jan M; Schneider, Grégory F

2018-04-11

The investigation of the transport properties of single molecules by flowing tunneling currents across extremely narrow gaps is relevant for challenges as diverse as the development of molecular electronics and sequencing of DNA. The achievement of well-defined electrode architectures remains a technical challenge, especially due to the necessity of high precision fabrication processes and the chemical instability of most bulk metals. Here, we illustrate a continuously adjustable tunneling junction between the edges of two twisted graphene sheets. The unique property of the graphene electrodes is that the sheets are rigidly supported all the way to the atomic edge. By analyzing the tunneling current characteristics, we also demonstrate that the spacing across the gap junction can be controllably adjusted. Finally, we demonstrate the transition from the tunneling regime to contact and the formation of an atomic-sized junction between the two edges of graphene.

New psychoactive substances: catalysing a shift in forensic science practice?

PubMed

Tettey, Justice; Crean, Conor

2015-08-05

The analysis of substances of abuse remains one of the most matured areas in forensic science with a strong scientific basis, namely analytical chemistry. The current evolving drug markets, characterized by the global emergence of new psychoactive substances (NPS) and the need for forensic scientists to identify an unprecedented and ever-increasing number of NPS, presents a unique challenge to this discipline. This article looks at the current situation with NPS at the global level, and the challenges posed to the otherwise technically robust forensic science discipline of analysis of substances of abuse. It discusses the preparedness of forensic science to deal with the current situation and identifies the need for a shift in forensic science practice, especially one which embraces research and looks beyond normal casework in order to provide the much needed data for developing effective policy responses to the NPS problem. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Lignocellulosic ethanol production by starch-base industrial yeast under PEG detoxification

PubMed Central

Liu, Xiumei; Xu, Wenjuan; Mao, Liaoyuan; Zhang, Chao; Yan, Peifang; Xu, Zhanwei; Zhang, Z. Conrad

2016-01-01

Cellulosic ethanol production from lignocellulosic biomass offers a sustainable solution for transition from fossil based fuels to renewable alternatives. However, a few long-standing technical challenges remain to be addressed in the development of an economically viable fermentation process from lignocellulose. Such challenges include the needs to improve yeast tolerance to toxic inhibitory compounds and to achieve high fermentation efficiency with minimum detoxification steps after a simple biomass pretreatment. Here we report an in-situ detoxification strategy by PEG exo-protection of an industrial dry yeast (starch-base). The exo-protected yeast cells displayed remarkably boosted vitality with high tolerance to toxic inhibitory compounds, and with largely improved ethanol productivity from crude hydrolysate derived from a pretreated lignocellulose. The PEG chemical exo-protection makes the industrial S. cerevisiae yeast directly applicable for the production of cellulosic ethanol with substantially improved productivity and yield, without of the need to use genetically modified microorganisms. PMID:26837707

An octave-spanning mid-infrared frequency comb generated in a silicon nanophotonic wire waveguide

PubMed Central

Kuyken, Bart; Ideguchi, Takuro; Holzner, Simon; Yan, Ming; Hänsch, Theodor W.; Van Campenhout, Joris; Verheyen, Peter; Coen, Stéphane; Leo, Francois; Baets, Roel; Roelkens, Gunther; Picqué, Nathalie

2015-01-01

Laser frequency combs, sources with a spectrum consisting of hundred thousands evenly spaced narrow lines, have an exhilarating potential for new approaches to molecular spectroscopy and sensing in the mid-infrared region. The generation of such broadband coherent sources is presently under active exploration. Technical challenges have slowed down such developments. Identifying a versatile highly nonlinear medium for significantly broadening a mid-infrared comb spectrum remains challenging. Here we take a different approach to spectral broadening of mid-infrared frequency combs and investigate CMOS-compatible highly nonlinear dispersion-engineered silicon nanophotonic waveguides on a silicon-on-insulator chip. We record octave-spanning (1,500–3,300 nm) spectra with a coupled input pulse energy as low as 16 pJ. We demonstrate phase-coherent comb spectra broadened on a room-temperature-operating CMOS-compatible chip. PMID:25697764

The surgical management of fibrous dysplasia of bone.

PubMed

Stanton, Robert P; Ippolito, Ernesto; Springfield, Dempsey; Lindaman, Lynn; Wientroub, Shlomo; Leet, Arabella

2012-05-24

The surgical management of Polyostotic Fibrous Dysplasia (FD) of bone is technically demanding. The most effective methods to manage the associated bone deformity remain unclear. The marked variation in the degree and pattern of bone involvement has made it difficult to acquire data to guide the surgeon's approach to these patients. In light of the paucity of data, but need for guidance, recognized experts in the management of these patients came together at the National Institutes of Health in Bethesda, Maryland as part of an International meeting to address issues related to fibrous dysplasia of bone to discuss and refine their recommendations regarding the surgical indications and preferred methods for the management of these challenging patients. The specific challenges, recommended approaches, and "lessons learned" are presented in hopes that surgeons faced with typical deformities can be guided in the surgical reconstruction of both children and adults with FD.

Text Mining for Adverse Drug Events: the Promise, Challenges, and State of the Art

PubMed Central

Harpaz, Rave; Callahan, Alison; Tamang, Suzanne; Low, Yen; Odgers, David; Finlayson, Sam; Jung, Kenneth; LePendu, Paea; Shah, Nigam H.

2014-01-01

Text mining is the computational process of extracting meaningful information from large amounts of unstructured text. Text mining is emerging as a tool to leverage underutilized data sources that can improve pharmacovigilance, including the objective of adverse drug event detection and assessment. This article provides an overview of recent advances in pharmacovigilance driven by the application of text mining, and discusses several data sources—such as biomedical literature, clinical narratives, product labeling, social media, and Web search logs—that are amenable to text-mining for pharmacovigilance. Given the state of the art, it appears text mining can be applied to extract useful ADE-related information from multiple textual sources. Nonetheless, further research is required to address remaining technical challenges associated with the text mining methodologies, and to conclusively determine the relative contribution of each textual source to improving pharmacovigilance. PMID:25151493

Lignocellulosic ethanol production by starch-base industrial yeast under PEG detoxification

NASA Astrophysics Data System (ADS)

Liu, Xiumei; Xu, Wenjuan; Mao, Liaoyuan; Zhang, Chao; Yan, Peifang; Xu, Zhanwei; Zhang, Z. Conrad

2016-02-01

Cellulosic ethanol production from lignocellulosic biomass offers a sustainable solution for transition from fossil based fuels to renewable alternatives. However, a few long-standing technical challenges remain to be addressed in the development of an economically viable fermentation process from lignocellulose. Such challenges include the needs to improve yeast tolerance to toxic inhibitory compounds and to achieve high fermentation efficiency with minimum detoxification steps after a simple biomass pretreatment. Here we report an in-situ detoxification strategy by PEG exo-protection of an industrial dry yeast (starch-base). The exo-protected yeast cells displayed remarkably boosted vitality with high tolerance to toxic inhibitory compounds, and with largely improved ethanol productivity from crude hydrolysate derived from a pretreated lignocellulose. The PEG chemical exo-protection makes the industrial S. cerevisiae yeast directly applicable for the production of cellulosic ethanol with substantially improved productivity and yield, without of the need to use genetically modified microorganisms.

Dynamic Tunneling Junctions at the Atomic Intersection of Two Twisted Graphene Edges

PubMed Central

2018-01-01

The investigation of the transport properties of single molecules by flowing tunneling currents across extremely narrow gaps is relevant for challenges as diverse as the development of molecular electronics and sequencing of DNA. The achievement of well-defined electrode architectures remains a technical challenge, especially due to the necessity of high precision fabrication processes and the chemical instability of most bulk metals. Here, we illustrate a continuously adjustable tunneling junction between the edges of two twisted graphene sheets. The unique property of the graphene electrodes is that the sheets are rigidly supported all the way to the atomic edge. By analyzing the tunneling current characteristics, we also demonstrate that the spacing across the gap junction can be controllably adjusted. Finally, we demonstrate the transition from the tunneling regime to contact and the formation of an atomic-sized junction between the two edges of graphene. PMID:29513997

Video-assisted thoracic surgery for left upper lobectomy for complex lesions: how to extend the indication with optimal safety?

PubMed

Bayard, Nathanaël Frank; Barnett, Stephen Arthur; Rinieri, Philippe; Melki, Jean; Peillon, Christophe; Baste, Jean Marc

2016-08-01

The feasibility of extending the VATS approach to locally advanced NSCLC has been described with good clinical outcome. These complex resections are still technically challenging and patient safety must remain the highest priority. In this article, we describe our routine VATS approach for left upper lobectomy in proximal, locally advanced lesions. Both surgical and anaesthesiology teams are trained during simulation sessions to respond rapidly in case of urgent thoracotomy. Encircling arterial and venous vessels allow control of inadvertent bleeding during difficult dissection. Also, whenever needed the double vessel control technique is a time saver waiting for conversion to thoracotomy.

Retention of the Native Epigenome in Purified Mammalian Chromatin

PubMed Central

Ehrensberger, Andreas H.; Franchini, Don-Marc; East, Philip; George, Roger; Matthews, Nik; Maslen, Sarah L.; Svejstrup, Jesper Q.

2015-01-01

A protocol is presented for the isolation of native mammalian chromatin as fibers of 25–250 nucleosomes under conditions that preserve the natural epigenetic signature. The material is composed almost exclusively of histones and DNA and conforms to the structure expected by electron microscopy. All sequences probed for were retained, indicating that the material is representative of the majority of the genome. DNA methylation marks and histone marks resembled the patterns observed in vivo. Importantly, nucleosome positions also remained largely unchanged, except on CpG islands, where nucleosomes were found to be unstable. The technical challenges of reconstituting biochemical reactions with native mammalian chromatin are discussed. PMID:26248330

Automatic laser welding and milling with in situ inline coherent imaging.

PubMed

Webster, P J L; Wright, L G; Ji, Y; Galbraith, C M; Kinross, A W; Van Vlack, C; Fraser, J M

2014-11-01

Although new affordable high-power laser technologies enable many processing applications in science and industry, depth control remains a serious technical challenge. In this Letter we show that inline coherent imaging (ICI), with line rates up to 312 kHz and microsecond-duration capture times, is capable of directly measuring laser penetration depth, in a process as violent as kW-class keyhole welding. We exploit ICI's high speed, high dynamic range, and robustness to interference from other optical sources to achieve automatic, adaptive control of laser welding, as well as ablation, achieving 3D micron-scale sculpting in vastly different heterogeneous biological materials.

Retrograde Coronary Chronic Total Occlusion Intervention

PubMed Central

Dash, Debabrata

2015-01-01

Coronary chronic total occlusion (CTO) is a frequent finding in patients with coronary artery disease. It remains one of the most challenging subsets, accounting for 10-20% of all percutaneous coronary interventions (PCI). Although remarkable progress in PCI has been made, it is reasonable to state that successful recanalization of CTO represents the “last frontier” of PCI. PCI of CTOs has been limited historically by technical success rates of 50-70%. The introduction of enhanced guidewires, microcatheter, channel dilatator with increasing operator experience, and innovative techniques such as the retrograde approach have raised hopes for better outcomes. This article goes into depth into various strategies of retrograde approach in CTO.

Challenges and Opportunities: Two Weeks of Teaching Technical Communication at Suzhou University, China.

ERIC Educational Resources Information Center

Ding, Daniel; Jablonski, John

2001-01-01

Relates the authors' experience teaching technical writing for two weeks at Suzhou University in China. Discusses activities; examines four technical writing textbooks purchased there; and offers suggestions about how technical communication might be established as a separate academic discipline in Chinese universities. Discusses technical…

Technical and Vocational Education in Nigeria: Issues, Challenges and a Way Forward

ERIC Educational Resources Information Center

Okoye, Reko; Arimonu, Maxwell Onyenwe

2016-01-01

Technical education, as enshrined in the Nigerian national policy on education, is concerned with qualitative technological human resources development directed towards a national pool of skilled and self reliant craftsmen, technicians and technologists in technical and vocational education fields. In Nigeria, the training of technical personnel…

Experiments and Modeling to Support Field Test Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Peter Jacob; Bourret, Suzanne Michelle; Zyvoloski, George Anthony

Disposition of heat-generating nuclear waste (HGNW) remains a continuing technical and sociopolitical challenge. We define HGNW as the combination of both heat generating defense high level waste (DHLW) and civilian spent nuclear fuel (SNF). Numerous concepts for HGNW management have been proposed and examined internationally, including an extensive focus on geologic disposal (c.f. Brunnengräber et al., 2013). One type of proposed geologic material is salt, so chosen because of its viscoplastic deformation that causes self-repair of damage or deformation induced in the salt by waste emplacement activities (Hansen and Leigh, 2011). Salt as a repository material has been tested atmore » several sites around the world, notably the Morsleben facility in Germany (c.f. Fahland and Heusermann, 2013; Wollrath et al., 2014; Fahland et al., 2015) and at the Waste Isolation Pilot Plant (WIPP) near Carlsbad, NM. Evaluating the technical feasibility of a HGNW repository in salt is an ongoing process involving experiments and numerical modeling of many processes at many facilities.« less

Nuclear Energy Present and Future

NASA Astrophysics Data System (ADS)

Hutchinson, I. H.

2006-10-01

Nuclear power plants currently generate about 20% of US and 17% of world electricity, which makes nuclear the largest non-emitting energy source in current use. Concerns about global climate change have led to a remarkable transformation of attitudes towards nuclear energy. There remain key challenges that must be faced when considering expansion of its contribution. In summary they are: Economics, Safety, Waste Disposal, and Proliferation. Electricity from legacy fission plants is highly competitive with fossil, but perceived financial risks make the large capital cost fraction a key hurdle to new-construction, and costs of 2 per installed Watt electrical are currently considered only just economically attractive. Proliferation of nuclear-weapons-enabling technology is a major concern for global stability, in which fusion may have significant technical advantages over fission. But proliferation control requires a combination of both technical and political initiatives. The feasibility of supplying process heat or hydrogen from nuclear energy inspires additional research into novel reactor concepts and associated technologies. The presentation will lay out this overall context of the nuclear energy renaissance.

Computational sciences in the upstream oil and gas industry

PubMed Central

Halsey, Thomas C.

2016-01-01

The predominant technical challenge of the upstream oil and gas industry has always been the fundamental uncertainty of the subsurface from which it produces hydrocarbon fluids. The subsurface can be detected remotely by, for example, seismic waves, or it can be penetrated and studied in the extremely limited vicinity of wells. Inevitably, a great deal of uncertainty remains. Computational sciences have been a key avenue to reduce and manage this uncertainty. In this review, we discuss at a relatively non-technical level the current state of three applications of computational sciences in the industry. The first of these is seismic imaging, which is currently being revolutionized by the emergence of full wavefield inversion, enabled by algorithmic advances and petascale computing. The second is reservoir simulation, also being advanced through the use of modern highly parallel computing architectures. Finally, we comment on the role of data analytics in the upstream industry. This article is part of the themed issue ‘Energy and the subsurface’. PMID:27597785

Improving integration and coordination of funding, technical assistance, and reporting/data collection: recommendations from CDC and USAPI stakeholders.

PubMed

Ka'opua, Lana Sue I; White, Susan F; Rochester, Phyllis F; Holden, Debra J

2010-09-01

Current US Federal funding mechanisms may foster program silos that disable sharing of resources and information across programs within a larger system of public health services. Such silos present challenges to USAPI communities where human resources, health infrastructure, and health financing are limited. Integrative and coordinated approaches have been recommended. The CDC Pacific Islands Integration and Coordination project was initiated by the Division of Cancer Prevention and Control (DCPC). Its project aim was to identify ways for the CDC to collaborate with the USAPI in improving CDC activities and processes related to chronic disease. This article focuses on recommendations for improving coordination and integration in three core areas of health services programming: funding, program reporting/data collection and analysis, and technical assistance. Preliminary information on challenges and issues relevant to the core areas was gathered through site visits, focus groups, key informant interviews, and other sources. This information was used by stakeholder groups from the CDC and the USAPI to develop recommendations in the core programming areas. Recommendations generated at the CDC and USAPI stakeholder meetings were prepared into a single set of recommendations and stakeholders reviewed the document for accuracy prior to its dissemination to CDC's National Center for Chronic Disease Prevention and Health Promotion programs management and staff. Key recommendations, include: (1) consideration of resource s and other challenges unique to the USAPI when reviewing funding applications, (2) consideration of ways to increase flexibility in USAPI use of program funds, (3) dedicate funding and human resources for technical assistance, (4) provide opportunities for capacity-building across programs and jurisdictions, (5) consider ways to more directly link program reporting with technical assistance. This project provided a unique opportunity for CDC and USAPI stakeholders to share diverse perspectives on challenges to public health programs in the USAPI. Despite diverse experiences, the final set of recommendations reflected a high level of concordance between USAPI and CDC stakeholders on ways to improve coordination and integration of CDC processes and activities in the three core areas. Recommendations have informed some actions already initiated by the DCPC, including the dedication of funds for leadership institutes aimed at enhancing USAPI capacity for sustainable, integrated regional and jurisdictional cancer control infrastructure. Such efforts are an important beginning, but more remains to be done. Indicated is the need for continuous dialogue and collaboration. While this project focused on the USAPI, our results may be relevant to those interested in inter-organizational collaborations, medically underserved areas, public health services programs, and community-based participatory approaches.

Improving integration and coordination of funding, technical assistance, and reporting/data collection: recommendations from CDC and USAPI stakeholders.

PubMed

Ka'opua, Lana Sue I; White, Susan F; Rochester, Phyllis F; Holden, Debra J

2011-03-01

Current US Federal funding mechanisms may foster program silos that disable sharing of resources and information across programs within a larger system of public health services. Such silos present challenges to USAPI communities where human resources, health infrastructure, and health financing are limited. Integrative and coordinated approaches have been recommended. The CDC Pacific Islands Integration and Coordination project was initiated by the CDC Division of Cancer Prevention and Control (DCPC). The project aim was to identify ways for the CDC to collaborate with the USAPI in improving CDC activities and processes related to chronic disease. This article focuses on recommendations for improving coordination and integration in three core areas of health services programming: funding, program reporting/data collection and analysis, and technical assistance. Preliminary information on challenges and issues relevant to the core areas was gathered through site visits, focus groups, key informant interviews, and other sources. This information was used by stakeholder groups from the CDC and the USAPI to develop recommendations in the core programming areas. Recommendations generated at the CDC and USAPI stakeholder meetings were prepared into a single set of recommendations and stakeholders reviewed the document for accuracy prior to its dissemination to CDC's National Center for Chronic Disease Prevention and Health Promotion programs management and staff. Key recommendations, include: (1) consideration of resources and other challenges unique to the USAPI when reviewing funding applications, (2) consideration of ways to increase flexibility in USAPI use of program funds, (3) dedication of funding and human resources for technical assistance, (4) provision of opportunities for capacity-building across programs and jurisdictions, (5) consideration of ways to more directly link program reporting with technical assistance. This project provided a unique opportunity for CDC and USAPI stakeholders to share diverse perspectives on challenges to public health programs in the USAPI. Despite diverse experiences, the final set of recommendations reflected a high level of concordance between USAPI and CDC stakeholders. Recommendations have informed or reinforced actions initiated by the DCPC, including the dedication of funds for leadership institutes aimed at enhancing USAPI capacity for sustainable, integrated regional and jurisdictional cancer control infrastructure. Such efforts are an important beginning, but more remains to be done. Indicated is the need for continuous dialogue and collaboration. While this project focused on the USAPI, our results may be relevant to those interested in inter-organizational collaborations, medically underserved areas, public health services programs, and community-based participatory approaches.

Value of information analysis in healthcare: a review of principles and applications.

PubMed

Tuffaha, Haitham W; Gordon, Louisa G; Scuffham, Paul A

2014-06-01

Economic evaluations are increasingly utilized to inform decisions in healthcare; however, decisions remain uncertain when they are not based on adequate evidence. Value of information (VOI) analysis has been proposed as a systematic approach to measure decision uncertainty and assess whether there is sufficient evidence to support new technologies. The objective of this paper is to review the principles and applications of VOI analysis in healthcare. Relevant databases were systematically searched to identify VOI articles. The findings from the selected articles were summarized and narratively presented. Various VOI methods have been developed and applied to inform decision-making, optimally designing research studies and setting research priorities. However, the application of this approach in healthcare remains limited due to technical and policy challenges. There is a need to create more awareness about VOI analysis, simplify its current methods, and align them with the needs of decision-making organizations.

Iridium: failures & successes

NASA Astrophysics Data System (ADS)

Christensen, CarissaBryce; Beard, Suzette

2001-03-01

This paper will provide an overview of the Iridium business venture in terms of the challenges faced, the successes achieved, and the causes of the ultimate failure of the venture — bankruptcy and system de-orbit. The paper will address technical, business, and policy issues. The intent of the paper is to provide a balanced and accurate overview of the Iridium experience, to aid future decision-making by policy makers, the business community, and technical experts. Key topics will include the history of the program, the objectives and decision-making of Motorola, the market research and analysis conducted, partnering strategies and their impact, consumer equipment availability, and technical issues — target performance, performance achieved, technical accomplishments, and expected and unexpected technical challenges. The paper will use as sources trade media and business articles on the Iridium program, technical papers and conference presentations, Wall Street analyst's reports, and, where possible, interviews with participants and close observers.

NASA's Pursuit of Low-Noise Propulsion for Low-Boom Commercial Supersonic Vehicles

NASA Technical Reports Server (NTRS)

Bridges, James; Brown, Clifford A.; Seidel, Jonathan A.

2018-01-01

Since 2006, when the Fundamental Aeronautics Program was instituted within NASA's Aeronautics Mission Directorate, there has been a Project looking at the technical barriers to commercial supersonic flight. Among the barriers is the noise produced by aircraft during landing and takeoff. Over the years that followed, research was carried out at NASA aeronautics research centers, often in collaboration with academia and industry, addressing the problem. In 2013, a high-level milestone was established, described as a Technical Challenge, with the objective of demonstrating the feasibility of a low-boom supersonic airliner that could meet current airport noise regulations. The Technical Challenge was formally called "Low Noise Propulsion for Low Boom Aircraft", and was completed in late 2016. This paper reports the technical findings from this Technical Challenge, reaching back almost 10 years to review the technologies and tools that were developed along the way. It also discusses the final aircraft configuration and propulsion systems required for a supersonic civilian aircraft to meet noise regulations using the technologies available today. Finally, the paper documents the model-scale tests that validated the acoustic performance of the study aircraft.

NASA's Pursuit of Low-Noise Propulsion for Low-Boom Commercial Supersonic Vehicles

NASA Technical Reports Server (NTRS)

Bridges, James; Brown, Clifford A.; Seidel, Jonathan

2018-01-01

Since 2006, when the Fundamental Aeronautics Program was instituted within NASA's Aeronautics Mission Directorate, there has been a Project looking at the technical barriers to commercial supersonic flight. Among the barriers is the noise produced by aircraft during landing and takeoff. Over the years that followed, research was carried out at NASA aeronautics research centers, often in collaboration with academia and industry, addressing the problem. In 2013, a high-level milestone was established, described as a Technical Challenge, with the objective of demonstrating the feasibility of a low-boom supersonic airliner that could meet current airport noise regulations. The Technical Challenge was formally called a Low Noise Propulsion for Low Boom Aircraft and was completed in late 2016. This paper reports the technical findings from this Technical Challenge, reaching back almost 10 years to review the technologies and tools that were developed along the way. It also discusses the final aircraft configuration and propulsion systems required for a supersonic civilian aircraft to meet noise regulations using the technologies available today. Finally, the paper documents the model-scale tests that validated the acoustic performance of the study aircraft.

Digital media in the home: technical and research challenges

NASA Astrophysics Data System (ADS)

Ribas-Corbera, Jordi

2005-03-01

This article attempts to identify some of the technology and research challenges facing the digital media industry in the future. We first discuss several trends in the industry, such as the rapid growth of broadband Internet networks and the emergence of networking and media-capable devices in the home. Next, we present technical challenges that result from these trends, such as effective media interoperability in devices, and provide a brief overview of Windows Media, which is one of the technologies in the market attempting to address these challenges. Finally, given these trends and the state of the art, we argue that further research on data compression, encoder optimization, and multi-format transcoding can potentially make a significant technical and business impact in digital media. We also explore the reasons that research on related techniques such as wavelets or scalable video coding is having a relatively minor impact in today"s practical digital media systems.

Student-Centered and Dynamic Interfaces that Enrich Technical Learning for Online Science Learners: A Review of the Literature

ERIC Educational Resources Information Center

Killian, Susan A.; Beck, Dennis E.; O'Bryan, Corliss A.; Jarvis, Nathan; Clausen, Edgar C.; Crandall, Philip G.

2014-01-01

Communicating complex scientific and technical information presents a challenge for food science educators. The most efficient learning occurs when all senses are engaged, one reason that many educators believe that scientific principles are best taught with hands-on laboratory experiences. Today there are many challenges to the continuation of…

Wireless Instrumentation Systems for Flight Testing at NASA AFRC

NASA Technical Reports Server (NTRS)

Hang, Richard

2017-01-01

NASA Armstrong Flight Research Center is revolutionizing its traditional wired instrumentation systems with wireless technologies. This effort faces many technical challenges, such as spectrum compliance, time synchronization, power distribution and airworthiness. This presentation summarizes NASA AFRC's flight test capabilities with current conventional instrumentation methodology and highlights the technical challenges of wireless systems used for flight test research applications.

76 FR 66078 - Notice of Industry Workshop on Technical and Regulatory Challenges in Deep and Ultra-Deep Outer...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-25

...-0087] Notice of Industry Workshop on Technical and Regulatory Challenges in Deep and Ultra-Deep Outer... and gas exploration and production in deep and ultra-deep OCS waters. Through this workshop, BSEE will... structured venue for consultation among offshore deepwater oil and gas industry and regulatory experts in...

Optimizing care for the obese patient in interventional radiology

PubMed Central

Aberle, Dwight; Charles, Hearns; Hodak, Steven; O’Neill, Daniel; Oklu, Rahmi; Deipolyi, Amy R.

2017-01-01

With the rising epidemic of obesity, interventional radiologists are treating increasing numbers of obese patients, as comorbidities associated with obesity preclude more invasive treatments. These patients are at heightened risk of vascular and oncologic disease, both of which often require interventional radiology care. Obese patients pose unique challenges in imaging, technical feasibility, and periprocedural monitoring. This review describes the technical and clinical challenges posed by this population, with proposed methods to mitigate these challenges and optimize care. PMID:28082253

Magnesium batteries: Current state of the art, issues and future perspectives

PubMed Central

Mizuno, Fuminori

2014-01-01

Summary “...each metal has a certain power, which is different from metal to metal, of setting the electric fluid in motion...” Count Alessandro Volta. Inspired by the first rechargeable magnesium battery prototype at the dawn of the 21st century, several research groups have embarked on a quest to realize its full potential. Despite the technical accomplishments made thus far, challenges, on the material level, hamper the realization of a practical rechargeable magnesium battery. These are marked by the absence of practical cathodes, appropriate electrolytes and extremely sluggish reaction kinetics. Over the past few years, an increased interest in this technology has resulted in new promising materials and innovative approaches aiming to overcome the existing hurdles. Nonetheless, the current challenges call for further dedicated research efforts encompassing fundamental understanding of the core components and how they interact with each other to offering new innovative solutions. In this review, we seek to highlight the most recent developments made and offer our perspectives on how to overcome some of the remaining challenges. PMID:25247113

Novel strategy of endoscopic submucosal dissection using an insulation-tipped knife for early gastric cancer: near-side approach method

PubMed Central

Mori, Genki; Nonaka, Satoru; Oda, Ichiro; Abe, Seiichiro; Suzuki, Haruhisa; Yoshinaga, Shigetaka; Nakajima, Takeshi; Saito, Yutaka

2015-01-01

Background and study aims: Endoscopic submucosal dissection (ESD) using insulation-tipped knives (IT knives) to treat gastric lesions located on the greater curvature of the gastric body remains technically challenging because of the associated bleeding, control of which can be difficult and time consuming. To eliminate these difficulties, we developed a novel strategy which we have called the “near-side approach method” and assessed its utility. Patients and methods: We reviewed patients who underwent ESD for solitary early gastric cancer located on the greater curvature of the gastric body from January 2003 to September 2014. The technical results of ESD were compared between the group treated with the novel near-side approach method and the group treated with the conventional method. Results: This study included 238 patients with 238 lesions, 118 of which were removed using the near-side approach method and 120 of which were removed using the conventional method. The median procedure time was 92 minutes for the near-side approach method and 120 minutes for the conventional method. The procedure time was significantly shorter in the near-side approach method arm. Although, the procedure time required by an experienced endoscopist was not significantly different between the two groups (100 vs. 110 minutes), the near-side approach group showed significantly shorter procedure time for a less-experienced endoscopist (90 vs. 120 minutes). Conclusions: The near-side approach method appears to require less time to complete gastric ESD than the conventional method using IT knives for technically challenging lesions located on the greater curvature of the gastric body, especially if the procedure is performed by less-experienced endoscopists. PMID:26528496

[OurPuppet - Caring support with an interactive puppet for informal caregivers : Opportunities and challenges in the social and technical developmental process].

PubMed

Kuhlmann, Andrea; Reuter, Verena; Schramek, Renate; Dimitrov, Todor; Görnig, Matthias; Matip, Eva-Maria; Matthies, Olaf; Naroska, Edwin

2018-01-01

The "OurPuppet" project comprises a sensor-based, interactive puppet that will be developed to communicate with people in need of care during a short period of absence of the informal caregiver. Specially qualified puppet guides will support the use of the new technical development. They instruct people with dementia and caregivers on how to use the puppet and supervise the (informal) care relationship through discussions on a regular basis. The article shows the specific components of users' needs for which the concrete technical development should find answers. It also focuses on the opportunities and challenges for the technical and social developmental process accompanied by these demands. The analysis of the users' needs is based on a participatory approach. Semi-structured focus group interviews were conducted with informal caregivers, nurses and volunteers in order to identify typical situations in home care settings. The interviews were paraphrased and summarized in order to deduce inductive categories (qualitative data analysis), which describe everyday situations that the technical system should address. Such analyses provide information about the needs of potential users and indicate how to design such technical systems. Furthermore, opportunities and challenges of the development process as well as important contextual information were identified.

Inter-organisational communication networks in healthcare: centralised versus decentralised approaches

PubMed Central

Pirnejad, Habibollah; Bal, Roland; Stoop, Arjen P.; Berg, Marc

2007-01-01

Background To afford efficient and high quality care, healthcare providers increasingly need to exchange patient data. The existence of a communication network amongst care providers will help them to exchange patient data more efficiently. Information and communication technology (ICT) has much potential to facilitate the development of such a communication network. Moreover, in order to offer integrated care interoperability of healthcare organizations based upon the exchanged data is of crucial importance. However, complications around such a development are beyond technical impediments. Objectives To determine the challenges and complexities involved in building an Inter-organisational Communication network (IOCN) in healthcare and the appropriations in the strategies. Case study Interviews, literature review, and document analysis were conducted to analyse the developments that have taken place toward building a countrywide electronic patient record and its challenges in The Netherlands. Due to the interrelated nature of technical and non-technical problems, a socio-technical approach was used to analyse the data and define the challenges. Results Organisational and cultural changes are necessary before technical solutions can be applied. There are organisational, financial, political, and ethicolegal challenges that have to be addressed appropriately. Two different approaches, one “centralised” and the other “decentralised” have been used by Dutch healthcare providers to adopt the necessary changes and cope with these challenges. Conclusion The best solutions in building an IOCN have to be drawn from both the centralised and the decentralised approaches. Local communication initiatives have to be supervised and supported centrally and incentives at the organisations' interest level have to be created to encourage the stakeholder organisations to adopt the necessary changes. PMID:17627296

Inter-organisational communication networks in healthcare: centralised versus decentralised approaches.

PubMed

Pirnejad, Habibollah; Bal, Roland; Stoop, Arjen P; Berg, Marc

2007-05-16

To afford efficient and high quality care, healthcare providers increasingly need to exchange patient data. The existence of a communication network amongst care providers will help them to exchange patient data more efficiently. Information and communication technology (ICT) has much potential to facilitate the development of such a communication network. Moreover, in order to offer integrated care interoperability of healthcare organizations based upon the exchanged data is of crucial importance. However, complications around such a development are beyond technical impediments. To determine the challenges and complexities involved in building an Inter-organisational Communication network (IOCN) in healthcare and the appropriations in the strategies. Interviews, literature review, and document analysis were conducted to analyse the developments that have taken place toward building a countrywide electronic patient record and its challenges in The Netherlands. Due to the interrelated nature of technical and non-technical problems, a socio-technical approach was used to analyse the data and define the challenges. Organisational and cultural changes are necessary before technical solutions can be applied. There are organisational, financial, political, and ethicolegal challenges that have to be addressed appropriately. Two different approaches, one "centralised" and the other "decentralised" have been used by Dutch healthcare providers to adopt the necessary changes and cope with these challenges. The best solutions in building an IOCN have to be drawn from both the centralised and the decentralised approaches. Local communication initiatives have to be supervised and supported centrally and incentives at the organisations' interest level have to be created to encourage the stakeholder organisations to adopt the necessary changes.

Single Cell and Metagenomic Assemblies: Biology Drives Technical Choices and Goals (Metagenomics Informatics Challenges Workshop: 10K Genomes at a Time)

ScienceCinema

Stepanauskas, Ramunas

2018-02-06

DOE JGI's Tanja Woyke, chair of the Single Cells and Metagenomes session, delivers an introduction, followed by Bigelow Laboratory's Ramunas Stepanauskas on "Single Cell and Metagenomic Assemblies: Biology Drives Technical Choices and Goals" at the Metagenomics Informatics Challenges Workshop held at the DOE JGI on October 12-13, 2011.

Challenge Study: A Project-Based Learning on a Wireless Communication System at Technical High School

ERIC Educational Resources Information Center

Terasawa, Ikuo

2016-01-01

The challenge study is a project based learning curriculum at Technical High School aimed at the construction of a wireless communication system. The first period was engineering issues in the construction of an artificial satellite and the second period was a positional locating system based on the general purpose wire-less device--ZigBee device.…

NASA Environmentally Responsible Aviation's Highly-Loaded Front Block Compressor Demonstration

NASA Technical Reports Server (NTRS)

Celestina, Mark

2017-01-01

The ERA project was created in 2009 as part of NASAs Aeronautics Research Mission Directorates (ARMD) Integrated Systems Aviation Program (IASP). The purpose of the ERA project was to explore and document the feasibility, benefit, and technical risk of vehicles concepts and enabling technologies to reduce aviations impact on the environment. The metrics for this technology is given in Figure 1 with the N+2 metrics highlighted in green. It is anticipated that the United States air transportation system will continue to expand significantly over the next few decades thus adversely impacting the environment unless new technology is incorporated to simultaneously reduce nitrous oxides (NOx), noise and fuel consumption. In order to achieve the overall goals and meet the technology insertion challenges, these goals were divided into technical challenges that were to be achieved during the execution of the ERA project. Technical challenges were accomplished through test campaigns conducted by Integrated Technology Demonstration (ITDs). ERAs technical performance period ended in 2015.

Site Guidelines for a "Making Middle Grades Work" Technical Review Visit

ERIC Educational Resources Information Center

Southern Regional Education Board, 2004

2004-01-01

The purpose of the Technical Review Visit (TRV) is to follow up on the actions taken to implement the recommendations indicated for each challenge in the most recent Technical Assistance Visit (TAV) report. This document provides the following: (1) Site Guidelines for the Making Middle Grades Work (MMGW) Technical Review Visit; (2) Site Checklist;…

Proceedings of the Annual National Clinic on Technical Education (12th, Spokane, Washington, March 26-28, 1975). Human Resource Development: Technical Education's Challenge.

ERIC Educational Resources Information Center

Rutledge, Gene; And Others

This report includes the presentations of the speakers appearing before the National Clinic on Technical Education. Topics cover human resource development; the impact of technical education on economic development (in Mississippi); economics of allied health education; manpower implications of environmental protection; manpower needs for…

Human Resource Development: Technical Education's Challenge. Proceedings of the Annual National Clinic on Technical Education (12th, Spokane, Washington, March 26-28, 1975).

ERIC Educational Resources Information Center

Washington State Community Coll. District 17, Spokane.

Speeches and discussions are transcribed in this report, which also includes a listing of the American Technical Education Association (ATEA) committee members, exhibitors, officers, and directory of speakers. Speeches covered "Human Resource Development" by Gene Rutledge; "The Impact of Technical Education on Economic…

Describing Acupuncture: A New Challenge for Technical Communicators.

ERIC Educational Resources Information Center

Karanikas, Marianthe

1997-01-01

Considers acupuncture as an increasingly popular alternative medical therapy, but difficult to describe in technical communication. Notes that traditional Chinese medical explanations of acupuncture are unscientific, and that scientific explanations of acupuncture are inconclusive. Finds that technical communicators must translate acupuncture for…

78 FR 50404 - Advanced Scientific Computing Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-19

... for the exascale challenges charge. Tentative Agenda: Agenda will include discussion of the following: Exascale Challenges Workshop and preliminary list of most critical challenges, and technical approaches to...

Posterior horn medial meniscal root repair with cruciate ligament/medial collateral ligament combined injuries.

PubMed

Wilson, Brian F; Johnson, Darren L

2011-12-01

Many meniscal root tears remain unrepaired, potentially due to under-recognition and the technical challenge of repairing them. A great effort is made to preserve the native meniscus and restore the circumferential fibers for hoop stress resistance. It has been well demonstrated in the literature that failure to repair this will lead to increased contact pressures in the medial compartment and early degenerative changes in the articular cartilage. Our technique is one that allows the meniscus to resume its important role of knee stability. A thorough understanding of meniscal root anatomy, as well as repair techniques, is important for the cruciate ligament surgeon. Copyright © 2011, SLACK Incorporated.

NOUS: Construction and Querying of Dynamic Knowledge Graphs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choudhury, Sutanay; Agarwal, Khushbu; Purohit, Sumit

The ability to construct domain specific knowledge graphs (KG) and perform question-answering or hypothesis generation is a trans- formative capability. Despite their value, automated construction of knowledge graphs remains an expensive technical challenge that is beyond the reach for most enterprises and academic institutions. We propose an end-to-end framework for developing custom knowl- edge graph driven analytics for arbitrary application domains. The uniqueness of our system lies A) in its combination of curated KGs along with knowledge extracted from unstructured text, B) support for advanced trending and explanatory questions on a dynamic KG, and C) the ability to answer queriesmore » where the answer is embedded across multiple data sources.« less

Crowd Sourcing for Challenging Technical Problems and Business Model

NASA Technical Reports Server (NTRS)

Davis, Jeffrey R.; Richard, Elizabeth

2011-01-01

Crowd sourcing may be defined as the act of outsourcing tasks that are traditionally performed by an employee or contractor to an undefined, generally large group of people or community (a crowd) in the form of an open call. The open call may be issued by an organization wishing to find a solution to a particular problem or complete a task, or by an open innovation service provider on behalf of that organization. In 2008, the Space Life Sciences Directorate (SLSD), with the support of Wyle Integrated Science and Engineering, established and implemented pilot projects in open innovation (crowd sourcing) to determine if these new internet-based platforms could indeed find solutions to difficult technical challenges. These unsolved technical problems were converted to problem statements, also called "Challenges" or "Technical Needs" by the various open innovation service providers, and were then posted externally to seek solutions. In addition, an open call was issued internally to NASA employees Agency wide (10 Field Centers and NASA HQ) using an open innovation service provider crowd sourcing platform to post NASA challenges from each Center for the others to propose solutions). From 2008 to 2010, the SLSD issued 34 challenges, 14 externally and 20 internally. The 14 external problems or challenges were posted through three different vendors: InnoCentive, Yet2.com and TopCoder. The 20 internal challenges were conducted using the InnoCentive crowd sourcing platform designed for internal use by an organization. This platform was customized for NASA use and promoted as NASA@Work. The results were significant. Of the seven InnoCentive external challenges, two full and five partial awards were made in complex technical areas such as predicting solar flares and long-duration food packaging. Similarly, the TopCoder challenge yielded an optimization algorithm for designing a lunar medical kit. The Yet2.com challenges yielded many new industry and academic contacts in bone imaging, microbial detection and even the use of pharmaceuticals for radiation protection. The internal challenges through NASA@Work drew over 6000 participants across all NASA centers. Challenges conducted by each NASA center elicited ideas and solutions from several other NASA centers and demonstrated rapid and efficient participation from employees at multiple centers to contribute to problem solving. Finally, on January 19, 2011, the SLSD conducted a workshop on open collaboration and innovation strategies and best practices through the newly established NASA Human Health and Performance Center (NHHPC). Initial projects will be described leading to a new business model for SLSD.

Turbines, Wind Tunnels, and Teamwork: The 2017 Collegiate Wind Competition Technical Challenge

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Ten college teams put their turbines to the test at the U.S. Department of Energy’s 2017 Collegiate Wind Competition Technical Challenge, held April 20–22 at the National Wind Technology Center (NWTC). The competition showcased a wide variety of turbine designs and highlighted the competitors’ brilliance, agility, and ingenuity. College students weren’t the only future wind energy experts at the NWTC that weekend: elementary and middle school students tested their turbines—crafted creatively from materials like soda bottles and aluminum foil—in the Colorado KidWind Challenge.

Assessment of Technical Skills Competence in the Operating Room: A Systematic and Scoping Review.

PubMed

Fahim, Christine; Wagner, Natalie; Nousiainen, Markku T; Sonnadara, Ranil

2018-05-01

While academic accreditation bodies continue to promote competency-based medical education (CBME), the feasibility of conducting regular CBME assessments remains challenging. The purpose of this study was to identify evidence pertaining to the practical application of assessments that aim to measure technical competence for surgical trainees in a nonsimulated, operative setting. In August 2016, the authors systematically searched Medline, Embase, and the Cochrane Database of Systematic Reviews for English-language, peer-reviewed articles published in or after 1996. The title, abstract, and full text of identified articles were screened. Data regarding study characteristics, psychometric and measurement properties, implementation of assessment, competency definitions, and faculty training were extracted. The findings from the systematic review were supplemented by a scoping review to identify key strategies related to faculty uptake and implementation of CBME assessments. A total of 32 studies were included. The majority of studies reported reasonable scores of interrater reliability and internal consistency. Seven articles identified minimum scores required to establish competence. Twenty-five articles mentioned faculty training. Many of the faculty training interventions focused on timely completion of assessments or scale calibration. There are a number of diverse tools used to assess competence for intraoperative technical skills and a lack of consensus regarding the definition of technical competence within and across surgical specialties. Further work is required to identify when and how often trainees should be assessed and to identify strategies to train faculty to ensure timely and accurate assessment.

Web-based technical assistance and training to promote community tobacco control policy change.

PubMed

Young, Walter F; Montgomery, Debbie; Nycum, Colleen; Burns-Martin, Lavon; Buller, David B

2006-01-01

In 1998 the tobacco industry was released of claims that provided monetary relief for states. A significant expansion of tobacco control activity in many states created a need to develop local capacity. Technical assistance and training for new and experienced staff became a significant challenge for tobacco control leadership. In Colorado, this challenge was addressed in part through the development of a technical assistance and training Web site designed for local tobacco control staff and coalition members. Researchers, technical Web site development specialists, state health agency, and state tobacco control coalition staff collaborated to develop, promote, and test the efficacy of this Web site. The work group embodied a range of skills including tobacco control, Web site technical development, marketing, training, and project management. Persistent marketing, updating of Web site content, and institutionalizing it as a principal source of information and training were key to use by community coalition members.

High-Resolution X-Ray Telescopes

NASA Technical Reports Server (NTRS)

ODell, Stephen L.; Brissenden, Roger J.; Davis, William; Elsner, Ronald F.; Elvis, Martin; Freeman, Mark; Gaetz, Terry; Gorenstein, Paul; Gubarev, Mikhail V.

2010-01-01

Fundamental needs for future x-ray telescopes: a) Sharp images => excellent angular resolution. b) High throughput => large aperture areas. Generation-X optics technical challenges: a) High resolution => precision mirrors & alignment. b) Large apertures => lots of lightweight mirrors. Innovation needed for technical readiness: a) 4 top-level error terms contribute to image size. b) There are approaches to controlling those errors. Innovation needed for manufacturing readiness. Programmatic issues are comparably challenging.

Methods of ex vivo expansion of human cord blood cells: challenges, successes and clinical implications.

PubMed

Baron, Frédéric; Ruggeri, Annalisa; Nagler, Arnon

2016-03-01

More than 40,000 unrelated cord blood transplantations (UCBT) have been performed worldwide as treatment for patients with malignant or non-malignant life threatening hematologic disorders. However, low absolute numbers of hematopoietic stem and progenitor cells (HSPCs) within a single cord blood unit has remained a limiting factor for this transplantation modality, particularly in adult recipients. Further, because UCB contains low numbers of mostly naïve T cells, immune recovery after UCBT is slow, predisposing patients to severe infections. Other causes of UCBT failure has included graft-versus-host disease (GVHD) and relapse of the underlying disease. In this article, we first review the current landscape of cord blood engineering aimed at improving engraftment. This includes approaches of UCB-HSPCs expansion and methods aimed at improving UCB-HSCPs homing. We then discuss recent approaches of cord blood engineering developed to prevent infection [generation of multivirus-specific cytotoxic T cells (VSTs) from UCB], relapse [transduction of UCB-T cells with tumor-specific chimeric receptor antigens (CARs)] and GVHD (expansion of regulatory T cells from UCB). Although many of these techniques of UCB engineering remain currently technically challenging and expensive, they are likely to revolutionize the field of UCBT in the next decades.

Tissue-engineered vascularized bone grafts: basic science and clinical relevance to trauma and reconstructive microsurgery.

PubMed

Johnson, Elizabeth O; Troupis, Theodore; Soucacos, Panayotis N

2011-03-01

Bone grafts are an important part of orthopaedic surgeon's armamentarium. Despite well-established bone-grafting techniques, large bone defects still represent a challenge. Efforts have therefore been made to develop osteoconductive, osteoinductive, and osteogenic bone-replacement systems. The long-term clinical goal in bone tissue engineering is to reconstruct bony tissue in an anatomically functional three-dimensional morphology. Current bone tissue engineering strategies take into account that bone is known for its ability to regenerate following injury, and for its intrinsic capability to re-establish a complex hierarchical structure during regeneration. Although the tissue engineering of bone for the reconstruction of small to moderate sized bone defects technically feasible, the reconstruction of large defects remains a daunting challenge. The essential steps towards optimized clinical application of tissue-engineered bone are dependent upon recent advances in the area of neovascularization of the engineered construct. Despite these recent advances, however, a gap from bench to bedside remains; this may ultimately be bridged by a closer collaboration between basic scientists and reconstructive surgeons. The aim of this review is to introduce the basic principles of tissue engineering of bone, outline the relevant bone physiology, and discuss the recent concepts for the induction of vascularization in engineered bone tissue. Copyright © 2011 Wiley-Liss, Inc.

TADS and Technical Assistance.

ERIC Educational Resources Information Center

Trohanis, Pascal L.

1983-01-01

Accomplishments of the Technical Assistance Development System (TADS) are cited, current challenges (including program development, and communication and coordination) are noted, and the mission mandated for TADS is outlined. (CL)

Safeguards Considerations for Thorium Fuel Cycles

DOE PAGES

Worrall, Louise G.; Worrall, Andrew; Flanagan, George F.; ...

2016-04-21

We report that by around 2025, thorium-based fuel cycles are likely to be deployed internationally. States such as China and India are pursuing research, development, and deployment pathways toward a number of commercial-scale thorium fuel cycles, and they are already building test reactors and the associated fuel cycle infrastructure. In the future, the potential exists for these emerging programs to sell, export, and deploy thorium fuel cycle technology in other states. Without technically adequate international safeguards protocols and measures in place, any future potential clandestine misuse of these fuel cycles could go undetected, compromising the deterrent value of these protocolsmore » and measures. The development of safeguards approaches for thorium-based fuel cycles is therefore a matter of some urgency. Yet, the focus of the international safeguards community remains mainly on safeguarding conventional 235U- and 239Pu-based fuel cycles while the safeguards challenges of thorium-uranium fuel cycles remain largely uninvestigated. This raises the following question: Is the International Atomic Energy Agency and international safeguards system ready for thorium fuel cycles? Furthermore, is the safeguards technology of today sufficiently mature to meet the verification challenges posed by thorium-based fuel cycles? In defining these and other related research questions, the objectives of this paper are to identify key safeguards considerations for thorium-based fuel cycles and to call for an early dialogue between the international safeguards and the nuclear fuel cycle communities to prepare for the potential safeguards challenges associated with these fuel cycles. In this paper, it is concluded that directed research and development programs are required to meet the identified safeguards challenges and to take timely action in preparation for the international deployment of thorium fuel cycles.« less

Applying value sensitive design (VSD) to wind turbines and wind parks: an exploration.

PubMed

Oosterlaken, Ilse

2015-04-01

Community acceptance still remains a challenge for wind energy projects. The most popular explanation for local opposition, the Not in My Backyard effect, has received fierce criticism in the past decade. Critics argue that opposition is not merely a matter of selfishness or ignorance, but that moral, ecological and aesthetic values play an important role. In order to better take such values into account, a more bottom-up, participatory decision process is usually proposed. Research on this topic focusses on either stakeholder motivations/attitudes, or their behavior during project implementation. This paper proposes a third research focus, namely the 'objects' which elicit certain behavioral responses and attitudes-the wind turbine and parks. More concretely, this paper explores Value Sensitive Design (VSD) as way to arrive at wind turbines and parks that better embed or reflect key values. After a critical discussion of the notion of acceptance versus acceptability and support, the paper discusses existing literature on ecology and aesthetics in relation to wind turbine/park design, which could serve as 'building blocks' of a more integral VSD approach of the topic. It also discusses the challenge of demarcating wind park projects as VSD projects. A further challenge is that VSD has been applied mainly at the level of technical artifacts, whereas wind parks can best be conceptualized as socio-technical system. This new application would therefore expand the current practice of VSD, and may as a consequence also lead to interesting new insights for the VSD community. The paper concludes that such an outcome-oriented approach of wind turbines and park is worth exploring further, as a supplement to rather than a replacement of the process-oriented approach that is promoted by the current literature on community acceptance of wind parks.

Drinking Water Quality Governance: A Comparative Case Study of Brazil, Ecuador, and Malawi.

PubMed

Kayser, Georgia L; Amjad, Urooj; Dalcanale, Fernanda; Bartram, Jamie; Bentley, Margaret E

2015-04-01

Human health is greatly affected by inadequate access to sufficient and safe drinking water, especially in low and middle-income countries. Drinking water governance improvements may be one way to better drinking water quality. Over the past decade, many projects and international organizations have been dedicated to water governance; however, water governance in the drinking water sector is understudied and how to improve water governance remains unclear. We analyze drinking water governance challenges in three countries-Brazil, Ecuador, and Malawi-as perceived by government, service providers, and civil society organizations. A mixed methods approach was used: a clustering model was used for country selection and qualitative semi-structured interviews were used with direct observation in data collection. The clustering model integrated political, economic, social and environmental variables that impact water sector performance, to group countries. Brazil, Ecuador and Malawi were selected with the model so as to enhance the generalizability of the results. This comparative case study is important because similar challenges are identified in the drinking water sectors of each country; while, the countries represent diverse socio-economic and political contexts, and the selection process provides generalizability to our results. We find that access to safe water could be improved if certain water governance challenges were addressed: coordination and data sharing between ministries that deal with drinking water services; monitoring and enforcement of water quality laws; and sufficient technical capacity to improve administrative and technical management of water services at the local level. From an analysis of our field research, we also developed a conceptual framework that identifies policy levers that could be used to influence governance of drinking water quality on national and sub-national levels, and the relationships between these levers.

Drinking Water Quality Governance: A Comparative Case Study of Brazil, Ecuador, and Malawi

PubMed Central

Kayser, Georgia L.; Amjad, Urooj; Dalcanale, Fernanda; Bartram, Jamie; Bentley, Margaret E.

2015-01-01

Human health is greatly affected by inadequate access to sufficient and safe drinking water, especially in low and middle-income countries. Drinking water governance improvements may be one way to better drinking water quality. Over the past decade, many projects and international organizations have been dedicated to water governance; however, water governance in the drinking water sector is understudied and how to improve water governance remains unclear. We analyze drinking water governance challenges in three countries—Brazil, Ecuador, and Malawi—as perceived by government, service providers, and civil society organizations. A mixed methods approach was used: a clustering model was used for country selection and qualitative semi-structured interviews were used with direct observation in data collection. The clustering model integrated political, economic, social and environmental variables that impact water sector performance, to group countries. Brazil, Ecuador and Malawi were selected with the model so as to enhance the generalizability of the results. This comparative case study is important because similar challenges are identified in the drinking water sectors of each country; while, the countries represent diverse socio-economic and political contexts, and the selection process provides generalizability to our results. We find that access to safe water could be improved if certain water governance challenges were addressed: coordination and data sharing between ministries that deal with drinking water services; monitoring and enforcement of water quality laws; and sufficient technical capacity to improve administrative and technical management of water services at the local level. From an analysis of our field research, we also developed a conceptual framework that identifies policy levers that could be used to influence governance of drinking water quality on national and sub-national levels, and the relationships between these levers. PMID:25798068

Managing Challenges in a Multi Contractor Project

NASA Technical Reports Server (NTRS)

King, Ron

2011-01-01

The presentation provides a project description, describes the integrated product team, and review project challenges. The challenges include programmatic, technical, basic drop tests, heavy drop tests, C-17 envelope expansion, and Ares I-X.

Crowdsourcing for Challenging Technical Problems - It Works!

NASA Technical Reports Server (NTRS)

Davis, Jeffrey R.

2011-01-01

The NASA Johnson Space Center Space Life Sciences Directorate (SLSD) and Wyle Integrated Science and Engineering (Wyle) will conduct a one-day business cluster at the 62nd IAC so that IAC attendees will understand the benefits of open innovation (crowdsourcing), review successful results of conducting technical challenges in various open innovation projects, and learn how an organization can effectively deploy these new problem solving tools to innovate more efficiently and effectively. Results from both the SLSD open innovation pilot program and the open innovation workshop conducted by the NASA Human Health and Performance Center will be discussed. NHHPC members will be recruited to participate in the business cluster (see membership http://nhhpc.nasa.gov) and as IAF members. Crowdsourcing may be defined as the act of outsourcing tasks that are traditionally performed by an employee or contractor to an undefined, generally large group of people or community (a crowd) in the form of an open call. The open call may be issued by the organization wishing to find a solution to a particular problem or complete a task, or by an open innovation service provider on behalf of that organization. In 2008, the SLSD, with the support of Wyle, established and implemented pilot projects in open innovation (crowdsourcing) to determine if these new internet-based platforms could indeed find solutions to difficult technical challenges. These unsolved technical problems were converted to problem statements, called Challenges by some open innovation service providers, and were then posted externally to seek solutions to these problems. In addition, an open call was issued internally to NASA employees Agency wide (11 Field Centers and NASA HQ) using an open innovation service provider crowdsourcing platform to post NASA challenges from each Center for the others to propose solutions). From 2008 to 2010, the SLSD issued 34 challenges, 14 externally and 20 internally. The 14 external problems or challenges were posted through three different vendors: InnoCentive, yet2.com and TopCoder. The 20 internal challenges were conducted using the InnoCentive crowdsourcing platform designed for use internal to an organization and customized for NASA use, and promoted as NASA@Work. The results were significant. Of the seven InnoCentive external challenges, two full and five partial awards were made in complex technical areas such as predicting solar flares and long-duration food packaging.

Developing Technical Skill Assessments

ERIC Educational Resources Information Center

Hyslop, Alisha

2009-01-01

One of the biggest challenges facing the career and technical education (CTE) community as it works to implement the 2006 Perkins Act is responding to more rigorous requirements for reporting on CTE students' technical skill attainment. The U.S. Department of Education suggested in non-regulatory guidance that states and locals use the number of…

A Decision Support Tool to Evaluate Sources and Sinks of Nitrogen within a Watershed Framework

EPA Science Inventory

Human transformation of the nitrogen (N) cycle is causing a number of environmental and human health problems. Federal, state and local authorities focusing on management of N loadings face both technical and non-technical challenges. One technical issue is that we need a bette...

The Technical Communicator as Corporate Spokesperson: A Public Relations Primer.

ERIC Educational Resources Information Center

Troester, Rod; Warburton, Terrence L.

2001-01-01

Examines the changing role of the technical communication professional in the rapidly evolving environment of organizational life. Presents five principles that serve as an initial step in laying a foundation for the preparation of technical communicators for the challenges and opportunities awaiting in contemporary organizations and the…

Echoes That Never Were: American Mobile Intercontinental Ballistic Missiles, 1956-1983

DTIC Science & Technology

2006-05-11

research, develop, operate, maintain, and sustain complex technological systems , ICBMs were--and remain--a system blending technical matters, scientific ...maintain, and sustain complex technological systems , ICBMs were--and remain--a system blending technical matters, scientific laws, economic...technological system that blended scientific laws, economic realities, political forces, and social concerns that included environmentalism and

Free-standing carbon nanotube composite sensing skin for distributed strain sensing in structures

NASA Astrophysics Data System (ADS)

Burton, Andrew R.; Minegishi, Kaede; Kurata, Masahiro; Lynch, Jerome P.

2014-04-01

The technical challenges of managing the health of critical infrastructure systems necessitate greater structural sensing capabilities. Among these needs is the ability for quantitative, spatial damage detection on critical structural components. Advances in material science have now opened the door for novel and cost-effective spatial sensing solutions specially tailored for damage detection in structures. However, challenges remain before spatial damage detection can be realized. Some of the technical challenges include sensor installations and extensive signal processing requirements. This work addresses these challenges by developing a patterned carbon nanotube composite thin film sensor whose pattern has been optimized for measuring the spatial distribution of strain. The carbon nanotube-polymer nanocomposite sensing material is fabricated on a flexible polyimide substrate using a layer-by-layer deposition process. The thin film sensors are then patterned into sensing elements using optical lithography processes common to microelectromechanical systems (MEMS) technologies. The sensor array is designed as a series of sensing elements with varying width to provide insight on the limitations of such patterning and implications of pattern geometry on sensing signals. Once fabrication is complete, the substrate and attached sensor are epoxy bonded to a poly vinyl composite (PVC) bar that is then tested with a uniaxial, cyclic load pattern and mechanical response is characterized. The fabrication processes are then utilized on a larger-scale to develop and instrument a component-specific sensing skin in order to observe the strain distribution on the web of a steel beam. The instrumented beam is part of a larger steel beam-column connection with a concrete slab in composite action. The beam-column subassembly is laterally loaded and strain trends in the web are observed using the carbon nanotube composite sensing skin. The results are discussed in the context of understanding the properties of the thin film sensor and how it may be advanced toward structural sensing applications.

Building and strengthening infrastructure for data exchange: lessons from the beacon communities.

PubMed

Torres, Gretchen W; Swietek, Karen; Ubri, Petry S; Singer, Rachel F; Lowell, Kristina H; Miller, Wilhelmine

2014-01-01

The Beacon Community Cooperative Agreement Program supports interventions, including care-delivery innovations, provider performance measurement and feedback initiatives, and tools for providers and consumers to enhance care. Using a learning health system framework, we examine the Beacon Communities' processes in building and strengthening health IT (HIT) infrastructures, specifically successes and challenges in sharing patient information to improve clinical care. In 2010, the Office of the National Coordinator for Health Information Technology (ONC) launched the three-year program, which provided $250 million to 17 Beacon Communities to invest in HIT and health information exchange (HIE) infrastructure. Beacon Communities used this funding to develop and disseminate HIT-enabled quality improvement practices found effective in particular community and practice environments. NORC conducted 7 site visits, November 2012-March 2013, selecting Communities to represent diverse program features. From August-October 2013, NORC held discussions with the remaining 10 Communities. Following each visit or discussion, NORC summarized the information gathered, including transcripts, team observations, and other documents the Community provided, to facilitate a within-Community analysis of context and stakeholders, intervention strategies, enabling factors, and challenges. Although each Community designed and implemented data-sharing strategies in a unique environment, similar challenges and enabling factors emerged across the Beacons. From a learning health system perspective, their strategies to build and strengthen data-sharing infrastructures address the following crosscutting priorities: promoting technical advances and innovations by helping providers adapt EHRs for data exchange and performance measurement with customizable IT and offering technical support to smaller, independent providers; engaging key stakeholders; and fostering transparent governance and stewardship of the infrastructure with neutral conveners. While all the Communities developed or strengthened data-exchange infrastructure, each did this in a unique environment of existing health care market and legal factors. The Communities, however, encountered similar challenges and enabling factors. Organizations undertaking collaborative data sharing, performance measurement and clinical transformation can learn from the Beacon Communities' experience.

Building and Strengthening Infrastructure for Data Exchange: Lessons from the Beacon Communities

PubMed Central

Torres, Gretchen W.; Swietek, Karen; Ubri, Petry S.; Singer, Rachel F.; Lowell, Kristina H.; Miller, Wilhelmine

2014-01-01

Introduction: The Beacon Community Cooperative Agreement Program supports interventions, including care-delivery innovations, provider performance measurement and feedback initiatives, and tools for providers and consumers to enhance care. Using a learning health system framework, we examine the Beacon Communities’ processes in building and strengthening health IT (HIT) infrastructures, specifically successes and challenges in sharing patient information to improve clinical care. Background: In 2010, the Office of the National Coordinator for Health Information Technology (ONC) launched the three-year program, which provided $250 million to 17 Beacon Communities to invest in HIT and health information exchange (HIE) infrastructure. Beacon Communities used this funding to develop and disseminate HIT-enabled quality improvement practices found effective in particular community and practice environments. Methods: NORC conducted 7 site visits, November 2012–March 2013, selecting Communities to represent diverse program features. From August–October 2013, NORC held discussions with the remaining 10 Communities. Following each visit or discussion, NORC summarized the information gathered, including transcripts, team observations, and other documents the Community provided, to facilitate a within-Community analysis of context and stakeholders, intervention strategies, enabling factors, and challenges. Results: Although each Community designed and implemented data-sharing strategies in a unique environment, similar challenges and enabling factors emerged across the Beacons. From a learning health system perspective, their strategies to build and strengthen data-sharing infrastructures address the following crosscutting priorities: promoting technical advances and innovations by helping providers adapt EHRs for data exchange and performance measurement with customizable IT and offering technical support to smaller, independent providers; engaging key stakeholders; and fostering transparent governance and stewardship of the infrastructure with neutral conveners. Conclusion: While all the Communities developed or strengthened data-exchange infrastructure, each did this in a unique environment of existing health care market and legal factors. The Communities, however, encountered similar challenges and enabling factors. Organizations undertaking collaborative data sharing, performance measurement and clinical transformation can learn from the Beacon Communities’ experience. PMID:25848619

A Qualitative Study of the Job Challenges of Instructional Deans in the Technical College System of Georgia

ERIC Educational Resources Information Center

Alford, Perrin J.

2014-01-01

The Technical College System of Georgia serves the people and the state by creating a system of technical education whose purpose is to use the latest technology and easy access for all adult Georgians and corporate citizens. Within each technical college is a hierarchy of faculty, staff, and administrators. The instructional deans serve a vital…

The present and future of de novo whole-genome assembly.

PubMed

Sohn, Jang-Il; Nam, Jin-Wu

2018-01-01

As the advent of next-generation sequencing (NGS) technology, various de novo assembly algorithms based on the de Bruijn graph have been developed to construct chromosome-level sequences. However, numerous technical or computational challenges in de novo assembly still remain, although many bright ideas and heuristics have been suggested to tackle the challenges in both experimental and computational settings. In this review, we categorize de novo assemblers on the basis of the type of de Bruijn graphs (Hamiltonian and Eulerian) and discuss the challenges of de novo assembly for short NGS reads regarding computational complexity and assembly ambiguity. Then, we discuss how the limitations of the short reads can be overcome by using a single-molecule sequencing platform that generates long reads of up to several kilobases. In fact, the long read assembly has caused a paradigm shift in whole-genome assembly in terms of algorithms and supporting steps. We also summarize (i) hybrid assemblies using both short and long reads and (ii) overlap-based assemblies for long reads and discuss their challenges and future prospects. This review provides guidelines to determine the optimal approach for a given input data type, computational budget or genome. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Expert Opinion Editorial Tissue Engineered Blood Vessels as Promising Tools for Testing Drug Toxicity

PubMed Central

Truskey, George A.; Fernandez, Cristina E.

2015-01-01

Drug-induced vascular injury (DIVI) is a serious problem in preclinical studies of vasoactive molecules and for survivors of pediatric cancers. DIVI is often observed in rodents and some larger animals, primarily with drugs affecting vascular tone, but not in humans; however, DIVI observed in animal studies often precludes a drug candidate from continuing along the development pipeline. Thus, there is great interest by the pharmaceutical industry to identify quantifiable human biomarkers of DIVI. Small scale endothelialized tissue-engineered blood vessels using human cells represent a promising approach to screen drug candidates and developed alternatives to cancer therapeutics in vitro. We identify several technical challenges that remain to be addressed, including high throughput systems to screen large numbers of candidates, identification of suitable cell sources, and establishing and maintaining a differentiated state of the vessel wall cells. Adequately addressing these challenges should yield novel platforms to screen drugs and develop new therapeutics to treat cardiovascular disease. PMID:26028128

Discovery of functional monoclonal antibodies targeting G-protein-coupled receptors and ion channels.

PubMed

Wilkinson, Trevor C I

2016-06-15

The development of recombinant antibody therapeutics is a significant area of growth in the pharmaceutical industry with almost 50 approved monoclonal antibodies on the market in the US and Europe. Despite this growth, however, certain classes of important molecular targets have remained intractable to therapeutic antibodies due to complexity of the target molecules. These complex target molecules include G-protein-coupled receptors and ion channels which represent a large potential target class for therapeutic intervention with monoclonal antibodies. Although these targets have typically been addressed by small molecule approaches, the exquisite specificity of antibodies provides a significant opportunity to provide selective modulation of these target proteins. Given this opportunity, substantial effort has been applied to address the technical challenges of targeting these complex membrane proteins with monoclonal antibodies. In this review recent progress made in the strategies for discovery of functional monoclonal antibodies for these challenging membrane protein targets is addressed. © 2016 The Author(s). published by Portland Press Limited on behalf of the Biochemical Society.

Wind Energy Deployment in Isolated Islanded Power Systems: Challenges & Realities (Poster)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baring-Gould, I.

Rising costs of fuels, energy surety, and the carbon impacts of diesel fuel are driving remote and islanded communities dependent on diesel power generation to look for alternatives. Over the past few years, interest in using wind energy to reduce diesel fuel consumption has increased dramatically, potentially providing economic, environmental, social, and security benefits to the energy supply of isolated and islanded communities. However, the task of implementing such systems has remained elusive and subject to many cases of lower-than-expected performance. This poster describes the current status of integrating higher contribution wind technology into islanded power systems, the progress ofmore » recent initiatives implemented by the U.S. Department of Energy and Interior, and some of the lingering technical and commercial challenges. Operating experience from a number of power systems is described. The worldwide market for wind development in islanded communities (some of these supplying large domestic loads) provides a strong market niche for the wind industry, even in the midst of a slow global recovery.« less

Skeletal Muscle Tissue Engineering: Methods to Form Skeletal Myotubes and Their Applications

PubMed Central

Ostrovidov, Serge; Hosseini, Vahid; Ahadian, Samad; Fujie, Toshinori; Parthiban, Selvakumar Prakash; Ramalingam, Murugan; Bae, Hojae; Kaji, Hirokazu

2014-01-01

Skeletal muscle tissue engineering (SMTE) aims to repair or regenerate defective skeletal muscle tissue lost by traumatic injury, tumor ablation, or muscular disease. However, two decades after the introduction of SMTE, the engineering of functional skeletal muscle in the laboratory still remains a great challenge, and numerous techniques for growing functional muscle tissues are constantly being developed. This article reviews the recent findings regarding the methodology and various technical aspects of SMTE, including cell alignment and differentiation. We describe the structure and organization of muscle and discuss the methods for myoblast alignment cultured in vitro. To better understand muscle formation and to enhance the engineering of skeletal muscle, we also address the molecular basics of myogenesis and discuss different methods to induce myoblast differentiation into myotubes. We then provide an overview of different coculture systems involving skeletal muscle cells, and highlight major applications of engineered skeletal muscle tissues. Finally, potential challenges and future research directions for SMTE are outlined. PMID:24320971

[Bowel endometriosis and infertility: Do we need to operate?

PubMed

Bourdon, M; Santulli, P; Marcellin, L; Lamau, M C; Maignien, C; Chapron, C

2017-09-01

Endometriosis is a benign chronic inflammatory disease, whose pathogenesis is still unclear. Endometriosis is responsible for infertility and/or pelvic pain. One of the most important features of the disease is the heterogeneity (clinical and anatomical: superficial peritoneal, ovarian and/or deep infiltrating lesions). Bowel involvement constitutes one particularly severe form of the disease, affecting 8-12% of women with deep endometriosis. In case of associated infertility, bowel endometriosis constitutes a real therapeutic challenge for gynecologists. Indeed, while complete resection of the lesions alleviates pain and seems to improve spontaneous fertility, surgery remains technically challenging and may cause severe complications. Reverting to assisted Reproductive Technology (ART) is another valuable therapeutic option regarding pregnancy rates. Thus, the choice between surgical management or ART is still debated. Benefits and risks of these two options should be considered and discussed before planning treatment. In the present study, we aimed to answer the question: Bowel endometriosis and infertility: do we need to operate? Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Assessing Induced Seismicity Risk at CO 2 Storage Projects: Recent Progress and Remaining Challenges

DOE PAGES

White, Joshua A.; Foxall, William

2016-04-13

It is well established that fluid injection has the potential to induce earthquakes—from microseismicity to magnitude 5+ events—by altering state-of-stress conditions in the subsurface. This paper reviews recent lessons learned regarding induced seismicity at carbon storage sites. While similar to other subsurface injection practices, CO 2 injection has distinctive features that should be included in a discussion of its seismic hazard. Induced events have been observed at CO 2 injection projects, though to date it has not been a major operational issue. Nevertheless, the hazard exists and experience with this issue will likely grow as new storage operations come online.more » This review paper focuses on specific technical difficulties that can limit the effectiveness of current risk assessment and risk management approaches, and highlights recent research aimed at overcoming them. Finally, these challenges form the heart of the induced seismicity problem, and novel solutions to them will advance our ability to responsibly deploy large-scale CO 2 storage.« less

MassTRIX: mass translator into pathways.

PubMed

Suhre, Karsten; Schmitt-Kopplin, Philippe

2008-07-01

Recent technical advances in mass spectrometry (MS) have brought the field of metabolomics to a point where large numbers of metabolites from numerous prokaryotic and eukaryotic organisms can now be easily and precisely detected. The challenge today lies in the correct annotation of these metabolites on the basis of their accurate measured masses. Assignment of bulk chemical formula is generally possible, but without consideration of the biological and genomic context, concrete metabolite annotations remain difficult and uncertain. MassTRIX responds to this challenge by providing a hypothesis-driven approach to high precision MS data annotation. It presents the identified chemical compounds in their genomic context as differentially colored objects on KEGG pathway maps. Information on gene transcription or differences in the gene complement (e.g. samples from different bacterial strains) can be easily added. The user can thus interpret the metabolic state of the organism in the context of its potential and, in the case of submitted transcriptomics data, real enzymatic capacities. The MassTRIX web server is freely accessible at http://masstrix.org.

Mannitol versus hypertonic saline: Safety and efficacy of mannitol and hypertonic saline in sputum induction and bronchial hyperreactivity assessment.

PubMed

Alvarez-Puebla, M J; Olaguibel, J M; Almudevar, E; Echegoyen, A A; Vela, C; de Esteban, B

2015-08-01

Eosinophilic asthma phenotype predicts good response to corticosteroids and associates to asthmatic exacerbations. Sputum induction by hypertonic saline (HS) inhalation is technically demanding. Bronchial hyperresponsiveness (BHR) to osmotic agents indirectly mirrors active airway inflammation. We compared the safety and ability of HS and mannitol to induce sputum and measure BHR. We evaluated the stability of inflammatory phenotypes. We studied 35 non-smoking asthmatics randomized to undergo HS and mannitol challenges on 2 days 1 week apart. Sputum was sampled for cell analysis and phenotyped as eosinophilic (≥3% eosinophils) and non-eosinophilic (<3%) asthma. Nineteen subjects had BHR to mannitol and nine of them also had BHR to HS. Drops in forced expiratory volume in 1 s were higher from HS challenge than from mannitol challenge. Adequate sputum samples were obtained from 80% subjects (68% mannitol and 71% HS). Eosinophils and macrophages from both challenges correlated. Neutrophils were higher in sputum from HS. Ninety percent samples were equally phenotyped with HS and mannitol. Fractional exhaled nitric oxide, sputum eosinophils and BHR correlated in both challenges. HS and mannitol showed similar capacity to produce valuable sputum samples. BHR to both osmotic stimuli partially resembled airway eosinophilic inflammation but mannitol was more sensitive than HS to assess BHR. Eosinophilic phenotype remained stable in most patients with both stimuli. © The Author(s) 2015.

1996 DOE technical standards program workshop: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-07-01

The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOEmore » representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.« less

Biliary sphincteroplasty facilitates retrieval of proximally migrated plastic biliary stent.

PubMed

Shah, Dharmesh K; Jain, Samit S; Somani, Piyush O; Rathi, Pravin M

2014-01-01

Proximal migration of biliary stents presents a technical challenge for the therapeutic endoscopist. It may require multiple, complicated corrective procedures resulting in significant morbidity to the patients. In this study we evaluated the utility of balloon biliary sphincteroplasty with CRE (Controlled Radial Expansion) Balloon Dilator on retrieval of proximally migrated biliary stents. We identified patients from our ERCP database who presented with proximal migration of biliary stent, between August 2011 and October 2013. Patients in whom the stent could not be retrieved with conventional methods, balloon sphincteroplasty was performed with a 12 mm CRETM Balloon Dilator (Boston Scientific). Stent removal was attempted with extraction balloon or basket thereafter. We identified 28 patients with proximal migration of biliary stents, placed for benign diseases of the common bile duct. Stent removal was successful in 18 patients (64.28%) with help of an extraction balloon or basket. Of the remaining 10 patients, balloon sphincteroplasty was successfully followed by stent removal in eight patients. Balloon biliary sphincteroplasty increases the success rate of retrieving proximally migrated biliary stents. The procedure is safe, technically easy and yields a good success rate in our experience.

Percutaneous vertebroplasty at C2: case report of a patient with multiple myeloma and a literature review

PubMed Central

Blimark, Cecilie; Willén, Jan; Mellqvist, Ulf-H; Rödjer, Stig

2006-01-01

Percutaneous vertebroplasty (PVP) of the axis is a challenging procedure which may be performed by a percutaneous or a transoral approach. There are few reports of PVP at the C2 level. We report a case of unstable C2 fracture treated with the percutaneous approach. The fracture was the first manifestation of multiple myeloma in a previously healthy 47-year-old woman. After local radiotherapy and chemotherapy, the fracture was still unstable and the patient had been continuously wearing a stiff cervical collar for 9 months. Complication-free PVP resulted in pain relief and stabilization and use of the cervical collar could be discontinued. At 18 months follow-up the patient remained free from pain, the fracture was stable and she had returned to work. The purpose of this article is to present the technical facts and to highlight the benefits and potential complications of the procedure. The technical characteristics of the procedure, the indication and results of the present case are discussed together with previously reported cases of PVP treatment at C2. PMID:17160394

Reconstruction of Long Bone Infections Using the Induced Membrane Technique: Tips and Tricks.

PubMed

Mauffrey, Cyril; Hake, Mark E; Chadayammuri, Vivek; Masquelet, Alain-Charles

2016-06-01

The management of posttraumatic long bone osteomyelitis remains a challenging clinical problem. A systematic approach is necessary, beginning with eradication of the infected bone and soft tissue. There are a number of options for reconstruction of the remaining bone defect, including the induced membrane technique developed by Masquelet. We describe our technique for the 2-stage treatment of long bone osteomyelitis. The first stage involves a radical debridement, stabilization of the bone with either external fixation or an antibiotic-coated intramedullary nail, and placement of a polymethylmethacrylate spacer. The second stage includes excision of the spacer and placement of autologous bone graft. Various resection methods, fixation strategies, antibiotic additives, and types of bone grafts or substitutes can be used. The purpose of our technical article is to share our personal experience and describe several nuances that are critical for the success of this treatment strategy. Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Technical Assistance Project Map | State, Local, and Tribal Governments |

Science.gov Websites

), NREL provides research to help stakeholders understand challenges and barriers to the development of offers various types of technical assistance to state and local governments. Clear All Filter by: State (0) All states Year (0) All years Type (0) All types Category (0) All categories Technical Assistance

The Promise of Systems Biology Approaches for Revealing Host Pathogen Interactions in Malaria

PubMed Central

Zuck, Meghan; Austin, Laura S.; Danziger, Samuel A.; Aitchison, John D.; Kaushansky, Alexis

2017-01-01

Despite global eradication efforts over the past century, malaria remains a devastating public health burden, causing almost half a million deaths annually (WHO, 2016). A detailed understanding of the mechanisms that control malaria infection has been hindered by technical challenges of studying a complex parasite life cycle in multiple hosts. While many interventions targeting the parasite have been implemented, the complex biology of Plasmodium poses a major challenge, and must be addressed to enable eradication. New approaches for elucidating key host-parasite interactions, and predicting how the parasite will respond in a variety of biological settings, could dramatically enhance the efficacy and longevity of intervention strategies. The field of systems biology has developed methodologies and principles that are well poised to meet these challenges. In this review, we focus our attention on the Liver Stage of the Plasmodium lifecycle and issue a “call to arms” for using systems biology approaches to forge a new era in malaria research. These approaches will reveal insights into the complex interplay between host and pathogen, and could ultimately lead to novel intervention strategies that contribute to malaria eradication. PMID:29201016

Verification Challenges at Low Numbers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benz, Jacob M.; Booker, Paul M.; McDonald, Benjamin S.

2013-07-16

This paper will explore the difficulties of deep reductions by examining the technical verification challenges. At each step on the road to low numbers, the verification required to ensure compliance of all parties will increase significantly. Looking post New START, the next step will likely include warhead limits in the neighborhood of 1000 (Pifer 2010). Further reductions will include stepping stones at 100’s of warheads, and then 10’s of warheads before final elimination could be considered of the last few remaining warheads and weapons. This paper will focus on these three threshold reduction levels, 1000, 100’s, 10’s. For each, themore » issues and challenges will be discussed, potential solutions will be identified, and the verification technologies and chain of custody measures that address these solutions will be surveyed. It is important to note that many of the issues that need to be addressed have no current solution. In these cases, the paper will explore new or novel technologies that could be applied. These technologies will draw from the research and development that is ongoing throughout the national lab complex, and will look at technologies utilized in other areas of industry for their application to arms control verification.« less

Transforming Education Research Through Open Video Data Sharing.

PubMed

Gilmore, Rick O; Adolph, Karen E; Millman, David S; Gordon, Andrew

2016-01-01

Open data sharing promises to accelerate the pace of discovery in the developmental and learning sciences, but significant technical, policy, and cultural barriers have limited its adoption. As a result, most research on learning and development remains shrouded in a culture of isolation. Data sharing is the rare exception (Gilmore, 2016). Many researchers who study teaching and learning in classroom, laboratory, museum, and home contexts use video as a primary source of raw research data. Unlike other measures, video captures the complexity, richness, and diversity of behavior. Moreover, because video is self-documenting, it presents significant potential for reuse. However, the potential for reuse goes largely unrealized because videos are rarely shared. Research videos contain information about participants' identities making the materials challenging to share. The large size of video files, diversity of formats, and incompatible software tools pose technical challenges. The Databrary (databrary.org) digital library enables researchers who study learning and development to store, share, stream, and annotate videos. In this article, we describe how Databrary has overcome barriers to sharing research videos and associated data and metadata. Databrary has developed solutions for respecting participants' privacy; for storing, streaming, and sharing videos; and for managing videos and associated metadata. The Databrary experience suggests ways that videos and other identifiable data collected in the context of educational research might be shared. Open data sharing enabled by Databrary can serve as a catalyst for a truly multidisciplinary science of learning.

Transforming Education Research Through Open Video Data Sharing

PubMed Central

Gilmore, Rick O.; Adolph, Karen E.; Millman, David S.; Gordon, Andrew

2016-01-01

Open data sharing promises to accelerate the pace of discovery in the developmental and learning sciences, but significant technical, policy, and cultural barriers have limited its adoption. As a result, most research on learning and development remains shrouded in a culture of isolation. Data sharing is the rare exception (Gilmore, 2016). Many researchers who study teaching and learning in classroom, laboratory, museum, and home contexts use video as a primary source of raw research data. Unlike other measures, video captures the complexity, richness, and diversity of behavior. Moreover, because video is self-documenting, it presents significant potential for reuse. However, the potential for reuse goes largely unrealized because videos are rarely shared. Research videos contain information about participants’ identities making the materials challenging to share. The large size of video files, diversity of formats, and incompatible software tools pose technical challenges. The Databrary (databrary.org) digital library enables researchers who study learning and development to store, share, stream, and annotate videos. In this article, we describe how Databrary has overcome barriers to sharing research videos and associated data and metadata. Databrary has developed solutions for respecting participants’ privacy; for storing, streaming, and sharing videos; and for managing videos and associated metadata. The Databrary experience suggests ways that videos and other identifiable data collected in the context of educational research might be shared. Open data sharing enabled by Databrary can serve as a catalyst for a truly multidisciplinary science of learning. PMID:28042361

Challenges Faced by Female-Students in Engineering-Education

ERIC Educational Resources Information Center

Madara, Diana Starovoytova; Cherotich, Sharon

2016-01-01

Gender-related challenges in learning technical courses are universal phenomenon. These challenges could restrain female students from achieving their fullest potential. The main focus of this study, therefore, is to examine self-recognized challenges faced by undergraduate female students in pursuing engineering at the School of Engineering…

The Use of Dynamic Stochastic Social Behavior Models to Produce Likelihood Functions for Risk Modeling of Proliferation and Terrorist Attacks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, Jonathan; Thompson, Sandra E.; Brothers, Alan J.

The ability to estimate the likelihood of future events based on current and historical data is essential to the decision making process of many government agencies. Successful predictions related to terror events and characterizing the risks will support development of options for countering these events. The predictive tasks involve both technical and social component models. The social components have presented a particularly difficult challenge. This paper outlines some technical considerations of this modeling activity. Both data and predictions associated with the technical and social models will likely be known with differing certainties or accuracies – a critical challenge is linkingmore » across these model domains while respecting this fundamental difference in certainty level. This paper will describe the technical approach being taken to develop the social model and identification of the significant interfaces between the technical and social modeling in the context of analysis of diversion of nuclear material.« less

The Difficult Gallbladder: A Safe Approach to a Dangerous Problem.

PubMed

Santos, B Fernando; Brunt, L Michael; Pucci, Michael J

2017-06-01

Laparoscopic cholecystectomy is a common surgical procedure, and remains the gold standard for the management of benign gallbladder and biliary disease. While this procedure can be technically straightforward, it can also represent one of the most challenging operations facing surgeons. This dichotomy of a routine operation performed so commonly that poses such a hidden risk of severe complications, such as bile duct injury, must keep surgeons steadfast in the pursuit of safety. The "difficult gallbladder" requires strict adherence to the Culture of Safety in Cholecystectomy, which promotes safety first and assists surgeons in managing or avoiding difficult operative situations. This review will discuss the management of the difficult gallbladder and propose the use of subtotal fenestrating cholecystectomy as a definitive option during this dangerous situation.

Successful repair of injured hepatic veins and inferior vena cava following blunt traumatic injury, by using cardiopulmonary bypass and hypothermic circulatory arrest.

PubMed

Kaoutzanis, Christodoulos; Evangelakis, Erotokritos; Kokkinos, Chrysostomos; Kaoutzanis, Gavriel

2011-01-01

Traumatic injury to the retrohepatic veins continues to carry high mortality rates. In the last few decades various management strategies have been proposed. However, treatment of such injuries still remains highly variable and technically challenging due to the surgically inaccessible location of these vessels and the consequent difficulty controlling bleeding. We report a successful repair of complete transection of the two main extraparenchymal hepatic veins and laceration of the retrohepatic inferior vena cava using cardiopulmonary bypass (CPB) and hypothermic circulatory arrest (HCA) following blunt abdominal trauma. Immediate CPB with or without HCA can be life-saving and should be considered for patients with complex isolated retrohepatic venous injuries.

Source mechanisms of volcanic tsunamis.

PubMed

Paris, Raphaël

2015-10-28

Volcanic tsunamis are generated by a variety of mechanisms, including volcano-tectonic earthquakes, slope instabilities, pyroclastic flows, underwater explosions, shock waves and caldera collapse. In this review, we focus on the lessons that can be learnt from past events and address the influence of parameters such as volume flux of mass flows, explosion energy or duration of caldera collapse on tsunami generation. The diversity of waves in terms of amplitude, period, form, dispersion, etc. poses difficulties for integration and harmonization of sources to be used for numerical models and probabilistic tsunami hazard maps. In many cases, monitoring and warning of volcanic tsunamis remain challenging (further technical and scientific developments being necessary) and must be coupled with policies of population preparedness. © 2015 The Author(s).

Commercialization of dish-Stirling solar terrestrial systems

NASA Technical Reports Server (NTRS)

Ross, Brad; Penswick, Barry; White, Maury; Cooper, Martin; Farbman, Gerald

1990-01-01

The requirements for dish-Stirling commercialization are described. The requirements for practical terrestrial power systems, both technical and economic, are described. Solar energy availability, with seasonal and regional variations, is discussed. The advantages and disadvantages of hybrid operation are listed. The two systems described use either a 25-kW free-piston Stirling hydraulic engine or a 5-kW kinematic Stirling engine. Both engines feature long-life characteristics that result from the use of welded metal bellows as hermetic seals between the working gas and the crankcase fluid. The advantages of the systems, the state of the technology, and the challenges that remain are discussed. Technology transfer between solar terrestrial Stirling applications and other Stirling applications is predicted to be important and synergistic.

Dissection of C. elegans behavioral genetics in 3-D environments

PubMed Central

Kwon, Namseop; Hwang, Ara B.; You, Young-Jai; V. Lee, Seung-Jae; Ho Je, Jung

2015-01-01

The nematode Caenorhabditis elegans is a widely used model for genetic dissection of animal behaviors. Despite extensive technical advances in imaging methods, it remains challenging to visualize and quantify C. elegans behaviors in three-dimensional (3-D) natural environments. Here we developed an innovative 3-D imaging method that enables quantification of C. elegans behavior in 3-D environments. Furthermore, for the first time, we characterized 3-D-specific behavioral phenotypes of mutant worms that have defects in head movement or mechanosensation. This approach allowed us to reveal previously unknown functions of genes in behavioral regulation. We expect that our 3-D imaging method will facilitate new investigations into genetic basis of animal behaviors in natural 3-D environments. PMID:25955271

Finance Program, Technical Assistance Brief 1

DOT National Transportation Integrated Search

1993-01-01

This four page pamphlet highlights the work of the Federal Transit : Administration's Office of Technical Assistance and Safety. Articles in this : issue are: Transit's Finance Challenge, which discusses the three main aspects : of the Office's Finan...

The Apollo Experience Lessons Learned for Constellation Lunar Dust Management

NASA Technical Reports Server (NTRS)

Wagner, Sandra

2008-01-01

In 2008, NASA was embarking on its Exploration Vision, knowing that many technical challenges would be encountered. For lunar exploration missions, one challenge was to learn to manage lunar dust. References to problems associated with lunar dust during the Apollo Program were found on many of pages of the mission reports and technical debriefs. All engineers designing hardware that would come into contact with lunar dust had to mitigate its effects in the design.

Quality Career/Technical Programs Prepare Students to Succeed in a New, More Challenging Economy

ERIC Educational Resources Information Center

Southern Regional Education Board (SREB), 2008

2008-01-01

Quality career/technical education and its role in school improvement was a primary theme of the 2008 "High Schools That Work" ("HSTW") Staff Development Conference. This newsletter covers crucial topics in quality CTE (career and technical education), including assessing the quality and effectiveness of CT programs, preparing students to succeed…

Use of Career Education and Occupation Information Services in Boosting Enrolment into Vocational and Technical Education Programs in Nigeria

ERIC Educational Resources Information Center

Igbinedion, V. I.; Ojeaga, I. J.

2012-01-01

The major thrust of technical and vocational education (TVE) worldwide is to address issues of youth unemployment, poverty and international competitiveness in skills development towards current and projected opportunities and challenges. The paper posits that despite the evidence of numerous reforms in vocational and technical education programs…

Strategic Management for Competitive Advantage: A Case Study of Higher Technical and Vocational Education in Taiwan

ERIC Educational Resources Information Center

Huang, Hsun-I; Lee, Cheng-Fei

2012-01-01

Higher technical and vocational education institutions in Taiwan face the pressure of an oversupply of student places and fierce competition from domestic and international institutions. To cope with these challenges, higher technical and vocational education institutions that are better equipped to respond to market requirements are expected to…

Teaching Intercultural Communication in a Basic Technical Writing Course: A Survey of Our Current Practices and Methods

ERIC Educational Resources Information Center

Matveeva, Natalia

2008-01-01

This research article reports the results of an online survey distributed among technical writing instructors in 2006. The survey aimed to examine how we teach intercultural communication in basic technical writing courses: our current practices and methods. The article discusses three major challenges that instructors may face when teaching about…

Scope and Challenges of Technical Education: A Kerala Perspective

ERIC Educational Resources Information Center

Rahman, M. Abdul; Unnikrishnan, Ramesh

2015-01-01

Technical education contributes a major share to the overall education system and plays a vital role in the social and economic development of our nation. Since independence, the technical education system in our country has grown into a fairly large-sized system, offering opportunities for education and training in a wide variety of trades and…

From single-cell to cell-pool transcriptomes: stochasticity in gene expression and RNA splicing.

PubMed

Marinov, Georgi K; Williams, Brian A; McCue, Ken; Schroth, Gary P; Gertz, Jason; Myers, Richard M; Wold, Barbara J

2014-03-01

Single-cell RNA-seq mammalian transcriptome studies are at an early stage in uncovering cell-to-cell variation in gene expression, transcript processing and editing, and regulatory module activity. Despite great progress recently, substantial challenges remain, including discriminating biological variation from technical noise. Here we apply the SMART-seq single-cell RNA-seq protocol to study the reference lymphoblastoid cell line GM12878. By using spike-in quantification standards, we estimate the absolute number of RNA molecules per cell for each gene and find significant variation in total mRNA content: between 50,000 and 300,000 transcripts per cell. We directly measure technical stochasticity by a pool/split design and find that there are significant differences in expression between individual cells, over and above technical variation. Specific gene coexpression modules were preferentially expressed in subsets of individual cells, including one enriched for mRNA processing and splicing factors. We assess cell-to-cell variation in alternative splicing and allelic bias and report evidence of significant differences in splice site usage that exceed splice variation in the pool/split comparison. Finally, we show that transcriptomes from small pools of 30-100 cells approach the information content and reproducibility of contemporary RNA-seq from large amounts of input material. Together, our results define an experimental and computational path forward for analyzing gene expression in rare cell types and cell states.

Operational Interventions to Maintenance Error

NASA Technical Reports Server (NTRS)

Kanki, Barbara G.; Walter, Diane; Dulchinos, VIcki

1997-01-01

A significant proportion of aviation accidents and incidents are known to be tied to human error. However, research of flight operational errors has shown that so-called pilot error often involves a variety of human factors issues and not a simple lack of individual technical skills. In aircraft maintenance operations, there is similar concern that maintenance errors which may lead to incidents and accidents are related to a large variety of human factors issues. Although maintenance error data and research are limited, industry initiatives involving human factors training in maintenance have become increasingly accepted as one type of maintenance error intervention. Conscientious efforts have been made in re-inventing the team7 concept for maintenance operations and in tailoring programs to fit the needs of technical opeRAtions. Nevertheless, there remains a dual challenge: 1) to develop human factors interventions which are directly supported by reliable human error data, and 2) to integrate human factors concepts into the procedures and practices of everyday technical tasks. In this paper, we describe several varieties of human factors interventions and focus on two specific alternatives which target problems related to procedures and practices; namely, 1) structured on-the-job training and 2) procedure re-design. We hope to demonstrate that the key to leveraging the impact of these solutions comes from focused interventions; that is, interventions which are derived from a clear understanding of specific maintenance errors, their operational context and human factors components.

Reduction of Maintenance Error Through Focused Interventions

NASA Technical Reports Server (NTRS)

Kanki, Barbara G.; Walter, Diane; Rosekind, Mark R. (Technical Monitor)

1997-01-01

It is well known that a significant proportion of aviation accidents and incidents are tied to human error. In flight operations, research of operational errors has shown that so-called "pilot error" often involves a variety of human factors issues and not a simple lack of individual technical skills. In aircraft maintenance operations, there is similar concern that maintenance errors which may lead to incidents and accidents are related to a large variety of human factors issues. Although maintenance error data and research are limited, industry initiatives involving human factors training in maintenance have become increasingly accepted as one type of maintenance error intervention. Conscientious efforts have been made in re-inventing the "team" concept for maintenance operations and in tailoring programs to fit the needs of technical operations. Nevertheless, there remains a dual challenge: to develop human factors interventions which are directly supported by reliable human error data, and to integrate human factors concepts into the procedures and practices of everyday technical tasks. In this paper, we describe several varieties of human factors interventions and focus on two specific alternatives which target problems related to procedures and practices; namely, 1) structured on-the-job training and 2) procedure re-design. We hope to demonstrate that the key to leveraging the impact of these solutions comes from focused interventions; that is, interventions which are derived from a clear understanding of specific maintenance errors, their operational context and human factors components.

Coupled plasma filtration adsorption: rationale, technical development and early clinical experience.

PubMed

Ronco, Claudio; Brendolan, Alessandra; d'Intini, Vincenzo; Ricci, Zaccaria; Wratten, Mary Lou; Bellomo, Rinaldo

2003-01-01

The adjuvant treatment of sepsis remains a major therapeutic challenge. Blood purification is theoretically appealing if the humoral theory of sepsis is accepted as the basis for intervention. In this setting, blood purification would provide a broad-based restoration of humoral homeostasis thereby avoiding both excessive inflammation and counterinflammation. Several techniques of blood purification have been tried or are under active investigation. One of these is the so-called coupled plasma filtration adsorption (CPFA). CPFA is a novel extracorporeal blood purification therapy aimed at nonselectively reducing the circulating levels and activities of both pro- and anti-inflammatory mediators during sepsis and multiorgan failure. In vitro studies have shown CPFA to be effective in binding a broad range of such mediators proving its technical efficacy. Subsequent animal models have shown a beneficial effect on survival in endotoxemia. These studies have provided the necessary technical developments and biologic rationale for initial human studies. Two phase I/IIa clinical studies have now been performed. Both studies have shown that CPFA improves blood pressure and restores immune function in patients with severe sepsis and multiorgan dysfunction. In this article, we will discuss some of the basic principles involved in sorbent technology, and how these may contribute to treatment efficacy, review animal experiments with CPFA and finally discuss the results of recent human studies and their implications. Copyright 2003 S. Karger AG, Basel

A Comparison of Robotically Assisted Microsurgery versus Manual Microsurgery in Challenging Situations.

PubMed

Willems, Joost I P; Shin, Alexandra M; Shin, Delaney M; Bishop, Allen T; Shin, Alexander Y

2016-04-01

Microsurgery can be challenging secondary to orientation of the vessels, accessibility, or depth of the wound. Robotically assisted microsurgery reduces tremors and improves visualization and may improve the quality of anastomosis compared with traditional microsurgery. The purpose of this study was to compare robotically assisted microsurgery to traditional microsurgery in technically challenging situations with respect to time of anastomosis, quality of anastomosis, and Objective Structured Assessment of Technical Skills. Two investigators with no prior surgery or microsurgery experience performed 160 anastomoses on artificial microvessels after undergoing standardized traditional and robotically assisted microsurgery courses. Five different exposure groups were created with depths of 0, 10, and 20 cm and sidewall angles of 20 and 30 degrees. A comparison of 80 manual with 80 robotically assisted microsurgery anastomoses in different exposure groups was undertaken. The modified Objective Structured Assessment of Technical Skills scoring system, duration per anastomosis, and a subjective comfort scale were evaluated. In the most difficult exposure, Objective Structured Assessment of Technical Skills scores were similar in both groups (p = 0.98), the duration was higher in the manual group (p = 0.004), and the subjective comfort rating was higher in the robotically assisted microsurgery group (p < 0.001). In the easiest (0-cm depth, flat) exposure, Objective Structured Assessment of Technical Skills scores were higher in the manual group (p = 0.018) and the duration was longer in the robotically assisted microsurgery group (p = 0.008). Manual surgery was superior to robotically assisted microsurgery in technically easy exposures. In difficult exposures (greater depth and lower sidewall angles), however, robotically assisted microsurgery had a shorter surgery time and a higher comfort rating, with Objective Structured Assessment of Technical Skills scores similar to those assessing traditional microsurgery. Therapeutic, V.

Using populations of human and microbial genomes for organism detection in metagenomes

DOE PAGES

Ames, Sasha K.; Gardner, Shea N.; Marti, Jose Manuel; ...

2015-04-29

Identifying causative disease agents in human patients from shotgun metagenomic sequencing (SMS) presents a powerful tool to apply when other targeted diagnostics fail. Numerous technical challenges remain, however, before SMS can move beyond the role of research tool. Accurately separating the known and unknown organism content remains difficult, particularly when SMS is applied as a last resort. The true amount of human DNA that remains in a sample after screening against the human reference genome and filtering nonbiological components left from library preparation has previously been underreported. In this study, we create the most comprehensive collection of microbial and reference-freemore » human genetic variation available in a database optimized for efficient metagenomic search by extracting sequences from GenBank and the 1000 Genomes Project. The results reveal new human sequences found in individual Human Microbiome Project (HMP) samples. Individual samples contain up to 95% human sequence, and 4% of the individual HMP samples contain 10% or more human reads. In conclusion, left unidentified, human reads can complicate and slow down further analysis and lead to inaccurately labeled microbial taxa and ultimately lead to privacy concerns as more human genome data is collected.« less

Using populations of human and microbial genomes for organism detection in metagenomes.

PubMed

Ames, Sasha K; Gardner, Shea N; Marti, Jose Manuel; Slezak, Tom R; Gokhale, Maya B; Allen, Jonathan E

2015-07-01

Identifying causative disease agents in human patients from shotgun metagenomic sequencing (SMS) presents a powerful tool to apply when other targeted diagnostics fail. Numerous technical challenges remain, however, before SMS can move beyond the role of research tool. Accurately separating the known and unknown organism content remains difficult, particularly when SMS is applied as a last resort. The true amount of human DNA that remains in a sample after screening against the human reference genome and filtering nonbiological components left from library preparation has previously been underreported. In this study, we create the most comprehensive collection of microbial and reference-free human genetic variation available in a database optimized for efficient metagenomic search by extracting sequences from GenBank and the 1000 Genomes Project. The results reveal new human sequences found in individual Human Microbiome Project (HMP) samples. Individual samples contain up to 95% human sequence, and 4% of the individual HMP samples contain 10% or more human reads. Left unidentified, human reads can complicate and slow down further analysis and lead to inaccurately labeled microbial taxa and ultimately lead to privacy concerns as more human genome data is collected. © 2015 Ames et al.; Published by Cold Spring Harbor Laboratory Press.

Using populations of human and microbial genomes for organism detection in metagenomes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ames, Sasha K.; Gardner, Shea N.; Marti, Jose Manuel

Identifying causative disease agents in human patients from shotgun metagenomic sequencing (SMS) presents a powerful tool to apply when other targeted diagnostics fail. Numerous technical challenges remain, however, before SMS can move beyond the role of research tool. Accurately separating the known and unknown organism content remains difficult, particularly when SMS is applied as a last resort. The true amount of human DNA that remains in a sample after screening against the human reference genome and filtering nonbiological components left from library preparation has previously been underreported. In this study, we create the most comprehensive collection of microbial and reference-freemore » human genetic variation available in a database optimized for efficient metagenomic search by extracting sequences from GenBank and the 1000 Genomes Project. The results reveal new human sequences found in individual Human Microbiome Project (HMP) samples. Individual samples contain up to 95% human sequence, and 4% of the individual HMP samples contain 10% or more human reads. In conclusion, left unidentified, human reads can complicate and slow down further analysis and lead to inaccurately labeled microbial taxa and ultimately lead to privacy concerns as more human genome data is collected.« less

PET/MRI – Technical Review

PubMed Central

Muzic, Raymond F.; DiFilippo, Frank P.

2015-01-01

PET/MR is a hybrid imaging technology with the potential to combine the molecular and functional information of PET with the soft-tissue contrast of MR. Herein we review the technical features and challenges of putting these different technologies together. We emphasize the conceptual to make the material accessible to a wide audience. We begin by reviewing PET/CT, a more mature multi-modality imaging technology, to provide a basis for comparison to the history of PET/MR development. We discuss the motivation and challenges of PET/MR and different approaches that have been used to meet the challenges. We conclude with a speculation about the future of this exciting imaging method. PMID:25497909

Studying Quality beyond Technical Rationality: Political and Symbolic Perspectives

ERIC Educational Resources Information Center

Blanco Ramírez, Gerardo

2013-01-01

The underlying paradigms that influence research on quality have remained alarmingly under-researched; this article analyses the constraints that a technical-rational approach for the study of quality in higher education imposes. Technical rationality has been the dominant paradigm that shapes research on quality in higher education.…

Engineering the System and Technical Integration

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.

2011-01-01

Approximately 80% of the problems encountered in aerospace systems have been due to a breakdown in technical integration and/or systems engineering. One of the major challenges we face in designing, building, and operating space systems is: how is adequate integration achieved for the systems various functions, parts, and infrastructure? This Contractor Report (CR) deals with part of the problem of how we engineer the total system in order to achieve the best balanced design. We will discuss a key aspect of this question - the principle of Technical Integration and its components, along with management and decision making. The CR will first provide an introduction with a discussion of the Challenges in Space System Design and meeting the challenges. Next is an overview of Engineering the System including Technical Integration. Engineering the System is expanded to include key aspects of the Design Process, Lifecycle Considerations, etc. The basic information and figures used in this CR were presented in a NASA training program for Program and Project Managers Development (PPMD) in classes at Georgia Tech and at Marshall Space Flight Center (MSFC). Many of the principles and illustrations are extracted from the courses we teach for MSFC.

Adjunctive Strategies in the Management of Resistant, ‘Undilatable’ Coronary Lesions After Successfully Crossing a CTO with a Guidewire

PubMed Central

Fairley, Sara L.; Spratt, James C.; Rana, Omar; Talwar, Suneel; Hanratty, Colm; Walsh, Simon

2014-01-01

Successful revascularisation of chronic total occlusions (CTOs) remains one of the greatest challenges in the era of contemporary percutaneous coronary intervention (PCI). Such lesions are encountered with increasing frequency in current clinical practice. A predictable increase in the future burden of CTO management can be anticipated given the ageing population, increased rates of renal failure, graft failure and diabetes mellitus. Given recent advances and developments in CTO PCI management, successful recanalisation can be anticipated in the majority of procedures undertaken at high-volume centres when performed by expert operators. Despite advances in device technology, the management of resistant, calcific lesions remains one of the greatest challenges in successful CTO intervention. Established techniques to modify calcific lesions include the use of high-pressure non-compliant balloon dilation, cutting-balloons, anchor balloons and high speed rotational atherectomy (HSRA). Novel approaches have proven to be safe and technically feasible where standard approaches have failed. A step-wise progression of strategies is demonstrated, from well-recognised techniques to techniques that should only be considered when standard manoeuvres have proven unsuccessful. These methods will be described in the setting of clinical examples and include use of very high-pressure non-compliant balloon dilation, intentional balloon rupture with vessel dissection or balloon assisted micro-dissection (BAM), excimer coronary laser atherectomy (ECLA) and use of HSRA in various ‘offlabel’ settings. PMID:24694106

48 CFR 227.7103-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... validation. Contracting officers must have reasonable grounds to challenge the current validity of an... available information pertaining to the assertion. All challenges must be made in accordance with the provisions of the clause at 252.227-7037, Validation of Restrictive Markings on Technical Data. (1) Challenge...

Managing Adaptive Challenges: Learning with Principals in Bermuda and Florida

ERIC Educational Resources Information Center

Drago-Severson, Eleanor; Maslin-Ostrowski, Patricia; Hoffman, Alexander M.; Barbaro, Justin

2014-01-01

We interviewed eight principals from Bermuda and Florida about how they identify and manage their most pressing challenges. Their challenges are composed of both adaptive and technical work, requiring leaders to learn to diagnose and manage them. Challenges focused on change and were traced to accountability contexts, yet accountability was not…

The relevance of economic data in the decision-making process for orbital launch vehicle programs, a U.S. perspective

NASA Astrophysics Data System (ADS)

Hertzfeld, Henry R.; Williamson, Ray A.; Peter, Nicolas

2007-12-01

Over the past fifteen years, major U.S. initiatives for the development of new launch vehicles have been remarkably unsuccessful. The list is long: NLI, SLI, and X-33, not to mention several cancelled programs aimed at high speed airplanes (NASP, HSCT) which would share some similar technological problems. The economic aspects of these programs are equally as important to their success as are the technical aspects. In fact, by largely ignoring economic realities in the decisions to undertake these programs and in subsequent management decisions, space agencies (and their commercial partners) have inadvertently contributed to the eventual demise of these efforts. The transportation revolution that was envisaged by the promises of these programs has never occurred. Access to space is still very expensive; reliability of launch vehicles has remained constant over the years; and market demand has been relatively low, volatile and slow to develop. The changing international context of the industry (launching overcapacity, etc.) has also worked against the investment in new vehicles in the U.S. Today, unless there are unforeseen technical breakthroughs, orbital space access is likely to continue as it has been with high costs and market stagnation. Space exploration will require significant launching capabilities. The details of the future needs are not yet well defined. But, the question of the launch costs, the overall demand for vehicles, and the size and type of role that NASA will play in the overall launch market is likely to influence the industry. This paper will emphasize the lessons learned from the economic and management perspective from past launch programs, analyze the issues behind the demand for launches, and project the challenges that NASA will face as only one new customer in a very complex market situation. It will be important for NASA to make launch vehicle decisions based as much on economic considerations as it does on solving new technical challenges.

A Review of Radiolysis Concerns for Water Shielding in Fission Surface Power Applications

NASA Technical Reports Server (NTRS)

Schoenfeld, Michael P.

2008-01-01

This paper presents an overview of radiolysis concerns with regard to water shields for fission surface power. A review of the radiolysis process is presented and key parameters and trends are identified. From this understanding of the radiolytic decomposition of water, shield pressurization and corrosion are identified as the primary concerns. Existing experimental and modeling data addressing concerns are summarized. It was found that radiolysis of pure water in a closed volume results in minimal, if any net decomposition, and therefore reduces the potential for shield pressurization and corrosion. With the space program focus m emphasize more on permanent return to the Moon and eventually manned exploration of Mars, there has been a renewed look at fission power to meet the difficult technical & design challenges associated with this effort. This is due to the ability of fission power to provide a power rich environment that is insensitive to solar intensity and related aspects such as duration of night, dusty environments, and distance from the sun, etc. One critical aspect in the utilization of fission power for these applications of manned exploration is shielding. Although not typically considered for space applications, water shields have been identified as one potential option due to benefits in mass savings and reduced development cost and technical risk (Poston, 2006). However, the water shield option requires demonstration of its ability to meet key technical challenges including such things as adequate natural circulation for thermal management and capability for operational periods up to 8 years. Thermal management concerns have begun to be addressed and are not expected to be a problem (Pearson, 2007). One significant concern remaining is the ability to maintain the shield integrity through its operational lifetime. Shield integrity could be compromised through shield pressurization and corrosion resulting from the radiolytic decomposition of water.

Increasing student confidence in technical and professional skills through project based learning

NASA Astrophysics Data System (ADS)

Robinson, Alice L.

This work focuses on developing undergraduate students' technical and professional skills through a project-based spiral curriculum in the Agricultural & Biological Engineering department at Purdue that can be implemented campus wide. Through this curriculum, Purdue engineers will be prepared for leadership roles in responding to the global technological, economic, and societal challenges of the 21st century by exposure to the relationships between engineering and its impacts on real world needs and challenges. Project-based learning uses projects as the focus of instruction and has shown increased understanding, motivation, and confidence through application of engineering principles to real-world problems. The strength of a spiral curriculum is that it continually revisits basic ideas and themes with increasing complexity and sophistication. The proposed spiral curriculum incorporates the target attributes of the Purdue Engineer of 2020 through project based courses during sophomore, junior, and senior year. These courses will build on concepts taught during first year engineering as well. The Engineer of 2020 (NAE and Purdue) target attributes include strong technical and professional skills to solve societal and technological burdens. A prototype course has been developed, taught, and evaluated during the previous two fall semesters in the sophomore level of the Biological and Food Process Engineering curriculum. The target students met 3 hours a week in a traditional lecture setting plus 2 hours a week in a project based lab setting. The control group met only 3 hours a week in a traditional lecture setting. Peer and self assessment results from student surveys show increased confidence in every area surveyed. Focus groups revealed student reactions to the course. Students enjoyed the course but felt it difficult to handle ambiguity with project work. Future work includes course revisions to the content, assessment, and pedagogy of the prototype class, development of the remaining project courses in the curriculum, and increasing graduate student instruction in the courses to gain teaching and leadership experience.

Addressing tomorrow's DMO technical challenges today

NASA Astrophysics Data System (ADS)

Milligan, James R.

2009-05-01

Distributed Mission Operations (DMO) is essentially a type of networked training that pulls in participants from all the armed services and, increasingly, allies to permit them to "game" and rehearse highly complex campaigns, using a mix of local, distant, and virtual players. The United States Air Force Research Laboratory (AFRL) is pursuing Science and Technology (S&T) solutions to address technical challenges associated with distributed communications and information management as DMO continues to progressively scale up the number, diversity, and geographic dispersal of participants in training and rehearsal exercises.

Sonic Boom Modeling Technical Challenge

NASA Technical Reports Server (NTRS)

Sullivan, Brenda M.

2007-01-01

This viewgraph presentation reviews the technical challenges in modeling sonic booms. The goal of this program is to develop knowledge, capabilities and technologies to enable overland supersonic flight. The specific objectives of the modeling are: (1) Develop and validate sonic boom propagation model through realistic atmospheres, including effects of turbulence (2) Develop methods enabling prediction of response of and acoustic transmission into structures impacted by sonic booms (3) Develop and validate psychoacoustic model of human response to sonic booms under both indoor and outdoor listening conditions, using simulators.

Cockpit Accommodation Assessment of the Bell 412CF Helicopter (Evaluation du Poste de Pilotage de l’Hellcoptere Bell 412CF)

DTIC Science & Technology

2009-12-01

Research, Ottawa , 1998 as issued jointly by the Canadian Institutes of Health Research, the Natural Sciences and Engineering Research Council of Canada...Flight Rules ) skills. Nine Bell 412CF helicopters were produced from existing CH-146 Griffons, which posed technical challenges. One such compromise was...IFR (Instrument Flight Rules ) skills. Nine Bell 412CF helicopters were produced from existing CH-146 Griffons, which posed technical challenges. One

LUVOIR Tech Notes

NASA Technical Reports Server (NTRS)

Bolcar, Matthew R.; Shaklan, Stuart; Roberge, Aki; Rioux, Norman; Feinberg, Lee; Werner, Michael; Rauscher, Bernard; Mandell, Avi; France, Kevin; Schiminovich, David

2016-01-01

We present nine "tech notes" prepared by the Large UV/Optical/Infrared (LUVOIR) Science and Technology Definition Team (STDT), Study Office, and Technology Working Group. These tech notes are intended to highlight technical challenges that represent boundaries in the trade space for developing the LUVOIR architecture that may impact the science objectives being developed by the STDT. These tech notes are intended to be high-level discussions of the technical challenges and will serve as starting points for more in-depth analysis as the LUVOIR study progresses.

Challenges to effective crisis management: using information and communication technologies to coordinate emergency medical services and emergency department teams.

PubMed

Reddy, Madhu C; Paul, Sharoda A; Abraham, Joanna; McNeese, Michael; DeFlitch, Christopher; Yen, John

2009-04-01

The purpose of this study is to identify the major challenges to coordination between emergency department (ED) teams and emergency medical services (EMS) teams. We conducted a series of focus groups involving both ED and EMS team members using a crisis scenario as the basis of the focus group discussion. We also collected organizational workflow data. We identified three major challenges to coordination between ED and EMS teams including ineffectiveness of current information and communication technologies, lack of common ground, and breakdowns in information flow. The three challenges highlight the importance of designing systems from socio-technical perspective. In particular, these inter-team coordination systems must support socio-technical issues such as awareness, context, and workflow between the two teams.

Pavement Remaining Service Interval [Tech Brief

DOT National Transportation Integrated Search

2013-05-01

This document is a technical summary of the Federal Highway Administration reports, "Reformulated Pavement Remaining Service Life Framework" (FHWA-HRT-13-038) and "Pavement Remaining Service Interval Implementation Guidelines" (FHWA-HRT-13-050). At t...

Total Quality Management (TQM) in Self-Financed Technical Institutions: A Quality Function Deployment (QFD) and Force Field Analysis Approach

ERIC Educational Resources Information Center

Thakkar, Jitesh; Deshmukh, S. G.; Shastree, Anil

2006-01-01

Purpose: To explore the potential for adoption of TQM in self-financed technical institutions in the light of new demands and challenges posed by customers/students and society. Design/methodology/approach: The paper presents use of quality function deployment (QFD) which prioritizes technical requirements and correlates them with various…

CFD Analysis of a Maneuvering F/A-18E Super Hornet

DTIC Science & Technology

2016-10-12

UNCLASSIFIED UNCLASSIFIED NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION PATUXENT RIVER, MARYLAND TECHNICAL INFORMATION MEMORANDUM...THE ABOVE ADDRESS. 1. REPORT DATE 12 October 2016 2. REPORT TYPE Technical Information Memorandum 3. DATES COVERED 2016 4. TITLE...dynamic unsteady effects of rapid motions of both the vehicle and its associated control surfaces is a known technical challenge. When aircraft

The Changing Role of Vocational and Technical Education and Training (VOTEC). Women in Vocational and Technical Education: Changes and Challenges.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

Changes in the vocational and technical education (VTE) opportunities available for women in Organisation for Economic Cooperation Development (OECD) member countries in response to changing labor markets and job skill requirements were discussed at a June 1994 meeting of experts. The discussions focused on the following issues: gender differences…

Missing data and technical variability in single-cell RNA-sequencing experiments.

PubMed

Hicks, Stephanie C; Townes, F William; Teng, Mingxiang; Irizarry, Rafael A

2017-11-06

Until recently, high-throughput gene expression technology, such as RNA-Sequencing (RNA-seq) required hundreds of thousands of cells to produce reliable measurements. Recent technical advances permit genome-wide gene expression measurement at the single-cell level. Single-cell RNA-Seq (scRNA-seq) is the most widely used and numerous publications are based on data produced with this technology. However, RNA-seq and scRNA-seq data are markedly different. In particular, unlike RNA-seq, the majority of reported expression levels in scRNA-seq are zeros, which could be either biologically-driven, genes not expressing RNA at the time of measurement, or technically-driven, genes expressing RNA, but not at a sufficient level to be detected by sequencing technology. Another difference is that the proportion of genes reporting the expression level to be zero varies substantially across single cells compared to RNA-seq samples. However, it remains unclear to what extent this cell-to-cell variation is being driven by technical rather than biological variation. Furthermore, while systematic errors, including batch effects, have been widely reported as a major challenge in high-throughput technologies, these issues have received minimal attention in published studies based on scRNA-seq technology. Here, we use an assessment experiment to examine data from published studies and demonstrate that systematic errors can explain a substantial percentage of observed cell-to-cell expression variability. Specifically, we present evidence that some of these reported zeros are driven by technical variation by demonstrating that scRNA-seq produces more zeros than expected and that this bias is greater for lower expressed genes. In addition, this missing data problem is exacerbated by the fact that this technical variation varies cell-to-cell. Then, we show how this technical cell-to-cell variability can be confused with novel biological results. Finally, we demonstrate and discuss how batch-effects and confounded experiments can intensify the problem. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Supersonics--Airport Noise

NASA Technical Reports Server (NTRS)

Bridges, James

2007-01-01

At this, the first year-end meeting of the Fundamental Aeronautics Program, an overview of the Airport Noise discipline of the Supersonics Project leads the presentation of technical plans and achievements in this area of the Project. The overview starts by defining the Technical Challenges targeted by Airport Noise efforts, and the Approaches planned to meet these challenges. These are fleshed out in Elements, namely Prediction, Diagnostics, and Engineering, and broken down into Tasks. The Tasks level is where individual researchers' work is defined and from whence the technical presentations to follow this presentation come. This overview also presents the Milestones accomplished to date and to be completed in the next year. Finally, the NASA Research Announcement cooperative agreement activities are covered and tied to the Tasks and Milestones.

Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

NASA Technical Reports Server (NTRS)

Castner, Ray

2012-01-01

The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Identification of usual interstitial pneumonia pattern using RNA-Seq and machine learning: challenges and solutions.

PubMed

Choi, Yoonha; Liu, Tiffany Ting; Pankratz, Daniel G; Colby, Thomas V; Barth, Neil M; Lynch, David A; Walsh, P Sean; Raghu, Ganesh; Kennedy, Giulia C; Huang, Jing

2018-05-09

We developed a classifier using RNA sequencing data that identifies the usual interstitial pneumonia (UIP) pattern for the diagnosis of idiopathic pulmonary fibrosis. We addressed significant challenges, including limited sample size, biological and technical sample heterogeneity, and reagent and assay batch effects. We identified inter- and intra-patient heterogeneity, particularly within the non-UIP group. The models classified UIP on transbronchial biopsy samples with a receiver-operating characteristic area under the curve of ~ 0.9 in cross-validation. Using in silico mixed samples in training, we prospectively defined a decision boundary to optimize specificity at ≥85%. The penalized logistic regression model showed greater reproducibility across technical replicates and was chosen as the final model. The final model showed sensitivity of 70% and specificity of 88% in the test set. We demonstrated that the suggested methodologies appropriately addressed challenges of the sample size, disease heterogeneity and technical batch effects and developed a highly accurate and robust classifier leveraging RNA sequencing for the classification of UIP.

The ISACA Business Model for Information Security: An Integrative and Innovative Approach

NASA Astrophysics Data System (ADS)

von Roessing, Rolf

In recent years, information security management has matured into a professional discipline that covers both technical and managerial aspects in an organisational environment. Information security is increasingly dependent on business-driven parameters and interfaces to a variety of organisational units and departments. In contrast, common security models and frameworks have remained largely technical. A review of extant models ranging from [LaBe73] to more recent models shows that technical aspects are covered in great detail, while the managerial aspects of security are often neglected.Likewise, the business view on organisational security is frequently at odds with the demands of information security personnel or information technology management. In practice, senior and executive level management remain comparatively distant from technical requirements. As a result, information security is generally regarded as a cost factor rather than a benefit to the organisation.

Education Industry, 2006

DTIC Science & Technology

2006-01-01

resulted in the U.S. Department of Education referring to it as Career and Technical Education (CTE). Minuteman High School, a highly successful...whole, and ultimately the students and the nation, will suffer the consequences. 7 Vocational Education The challenge for Career and Technical Education (CTE

Where the lay and the technical meet: Using an anthropology of interfaces to explain persistent reproductive health disparities in West Africa.

PubMed

Jaffré, Yannick; Suh, Siri

2016-05-01

Despite impressive global investment in reproductive health programs in West Africa, maternal mortality remains unacceptably high and obstetric care is often inadequate. Fertility is among the highest in the world, while contraceptive prevalence remains among the lowest. This paper explores the social and technical dimensions of this situation. We argue that effective reproductive health programs require analyzing the interfaces between technical programs and the social logics and behaviors of health professionals and client populations. Significant gaps between health programs' goals and the behaviors of patients and health care professionals have been observed. While public health projects aim to manage reproduction, sexuality, fertility, and professional practices are regulated socially. Such projects may target technical practices, but access to care is greatly influenced by social norms and ethics. This paper shows how an empirical anthropology that investigates the social and technical interfaces of reproduction can contribute to improved global health. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Report to the U.S. Department of Education on Educational Challenges and Technical Assistance Needs for the Northeast Region

ERIC Educational Resources Information Center

CNA Corporation, 2005

2005-01-01

The Northeast Regional Advisory Committee (NE RAC) provides an assessment of the technical assistance needs of educators in the Northeast Region in response to a directive from the Secretary of the U.S. Department of Education (ED). The Secretary will use this assessment in establishing 20 comprehensive centers to provide technical assistance to…

The Challenge of the Future. Future Trends in Adult and Continuing Technical and Vocational Education. An International Symposium (Berlin, Germany, October 16-20, 1995).

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Hamburg (Germany). Inst. for Education.

This report on an international symposium on the strengthening of the development and improvement of vocational education begins with a description of UNEVOC, the International Project on Technical and Vocational Education. Section 2 presents discussions of the following topics: adult and continuing technical and vocational education and its…

Approaching 4 Decades of Legislation in the National Family Planning Program: An Analysis of Title X's History From 1970 to 2008

PubMed Central

Daley, Ellen M.; Perrin, Kay M.; Mahan, Charles S.; Buhi, Eric R.

2011-01-01

Family planning is an important public health activity. Title X (Pub L No. 91-572), enacted in 1970, remains the only national family planning program in the United States dedicated to providing voluntary and confidential services to all individuals. We conducted a thematic analysis of Title X's legislative history. Of 293 federal bills included in the legislative history, only 20 (6.8%) were enacted into law. Regardless of the proposed challenges, limited changes have been adopted. Except for technical amendments, bills involving restrictions accounted for the highest percentage of enacted bills, demonstrating efforts to undermine reproductive health rights. Title X requires political will and bipartisan support if it is to continue to protect individuals' reproductive rights. PMID:21940931

Upper gastrointestinal barium evaluation of duodenal pathology: A pictorial review

PubMed Central

Gupta, Pankaj; Debi, Uma; Sinha, Saroj Kant; Prasad, Kaushal Kishor

2014-01-01

Like other parts of the gastrointestinal tract (GIT), duodenum is subject to a variety of lesions both congenital and acquired. However, unlike other parts of the GIT viz. esophagus, rest of the small intestine and large intestine, barium evaluation of duodenal lesions is technically more challenging and hence not frequently reported. With significant advances in computed tomography technology, a thorough evaluation including intraluminal, mural and extramural is feasible in a single non-invasive examination. Notwithstanding, barium evaluation still remains the initial and sometimes the only imaging study in several parts of the world. Hence, a thorough acquaintance with the morphology of various duodenal lesions on upper gastrointestinal barium examination is essential in guiding further evaluation. We reviewed our experience with various common and uncommon barium findings in duodenal abnormalities. PMID:25170399

Initial Low-Reynolds Number Iced Aerodynamic Performance for CRM Wing

NASA Technical Reports Server (NTRS)

Woodard, Brian; Diebold, Jeff; Broeren, Andy; Potapczuk, Mark; Lee, Sam; Bragg, Michael

2015-01-01

NASA, FAA, ONERA, and other partner organizations have embarked on a significant, collaborative research effort to address the technical challenges associated with icing on large scale, three-dimensional swept wings. These are extremely complex phenomena important to the design, certification and safe operation of small and large transport aircraft. There is increasing demand to balance trade-offs in aircraft efficiency, cost and noise that tend to compete directly with allowable performance degradations over an increasing range of icing conditions. Computational fluid dynamics codes have reached a level of maturity that they are being proposed by manufacturers for use in certification of aircraft for flight in icing. However, sufficient high-quality data to evaluate their performance on iced swept wings are not currently available in the public domain and significant knowledge gaps remain.

Microscale Laminar Vortices for High-Purity Extraction and Release of Circulating Tumor Cells.

PubMed

Hur, Soojung Claire; Che, James; Di Carlo, Dino

2017-01-01

Circulating tumor cells (CTCs) are disseminated tumor cells that reflect the tumors of origin and can provide a liquid biopsy that would potentially enable noninvasive tumor profiling, treatment monitoring, and identification of targeted treatments. Accurate and rapid purification of CTCs holds great potential to improve cancer care but the task remains technically challenging. Microfluidic isolation of CTCs within microscale vortices enables high-throughput and size-based purification of rare CTCs from bodily fluids. Collected cells are highly pure, viable, and easily accessible, allowing seamless integration with various downstream applications. Here, we describe how to fabricate the High-Throughput Vortex Chip (Vortex-HT) and to process diluted whole blood for CTC collection. Lastly, immunostaining and imaging protocols for CTC classification and corresponding CTC image galleries are reported.

On the experimental approaches for the assessment of the release of engineered nanomaterials from nanocomposites by physical degradation processes

NASA Astrophysics Data System (ADS)

Blázquez, M.; Egizabal, A.; Unzueta, I.

2014-08-01

The LIFE+ Project SIRENA, Simulation of the release of nanomaterials from consumer products for environmental exposure assessment, (LIFE11 ENV/ES/596) has set up a Technological Surveillance System (TSS) to trace technical references at worldwide level related to nanocomposites and the release from nanocomposites. So far a total of seventy three items of different nature (from peer reviewed articles to presentations and contributions to congresses) have been selected and classified as "nanomaterials release simulation technologies". In present document, different approaches for the simulation of different life cycle stages through the physical degradation of polymer nanocomposites at laboratory scale are assessed. In absence of a reference methodology, the comparison of the different protocols used still remains a challenge.

Environmental DNA for wildlife biology and biodiversity monitoring.

PubMed

Bohmann, Kristine; Evans, Alice; Gilbert, M Thomas P; Carvalho, Gary R; Creer, Simon; Knapp, Michael; Yu, Douglas W; de Bruyn, Mark

2014-06-01

Extraction and identification of DNA from an environmental sample has proven noteworthy recently in detecting and monitoring not only common species, but also those that are endangered, invasive, or elusive. Particular attributes of so-called environmental DNA (eDNA) analysis render it a potent tool for elucidating mechanistic insights in ecological and evolutionary processes. Foremost among these is an improved ability to explore ecosystem-level processes, the generation of quantitative indices for analyses of species, community diversity, and dynamics, and novel opportunities through the use of time-serial samples and unprecedented sensitivity for detecting rare or difficult-to-sample taxa. Although technical challenges remain, here we examine the current frontiers of eDNA, outline key aspects requiring improvement, and suggest future developments and innovations for research. Copyright © 2014 Elsevier Ltd. All rights reserved.

Reasons for Choosing a Technically Oriented Education: An Interview Study within the Fields of Pipefitting and Industry

ERIC Educational Resources Information Center

Bjurulf, Veronica

2012-01-01

The article examines how professionals within technical businesses describe their ways into their trade and why they have remained. Semi-structured interviews, analyzed by analysis of narratives, have been conducted with six informants within pipefitting and industrial work aiming to understand how technically oriented professions can attract…

A systematic and critical review of the evolving methods and applications of value of information in academia and practice.

PubMed

Steuten, Lotte; van de Wetering, Gijs; Groothuis-Oudshoorn, Karin; Retèl, Valesca

2013-01-01

This article provides a systematic and critical review of the evolving methods and applications of value of information (VOI) in academia and practice and discusses where future research needs to be directed. Published VOI studies were identified by conducting a computerized search on Scopus and ISI Web of Science from 1980 until December 2011 using pre-specified search terms. Only full-text papers that outlined and discussed VOI methods for medical decision making, and studies that applied VOI and explicitly discussed the results with a view to informing healthcare decision makers, were included. The included papers were divided into methodological and applied papers, based on the aim of the study. A total of 118 papers were included of which 50 % (n = 59) are methodological. A rapidly accumulating literature base on VOI from 1999 onwards for methodological papers and from 2005 onwards for applied papers is observed. Expected value of sample information (EVSI) is the preferred method of VOI to inform decision making regarding specific future studies, but real-life applications of EVSI remain scarce. Methodological challenges to VOI are numerous and include the high computational demands, dealing with non-linear models and interdependency between parameters, estimations of effective time horizons and patient populations, and structural uncertainties. VOI analysis receives increasing attention in both the methodological and the applied literature bases, but challenges to applying VOI in real-life decision making remain. For many technical and methodological challenges to VOI analytic solutions have been proposed in the literature, including leaner methods for VOI. Further research should also focus on the needs of decision makers regarding VOI.

Ready-to-use foods for management of moderate acute malnutrition: considerations for scaling up production and use in programs.

PubMed

Osendarp, Saskia; Rogers, Beatrice; Ryan, Kelsey; Manary, Mark; Akomo, Peter; Bahwere, Paluku; Belete, Hilina; Zeilani, Mamane; Islam, Munirul; Dibari, Filippo; De Pee, Saskia

2015-03-01

Ready-to-use foods are one of the available strategies for the treatment of moderate acute malnutrition (MAM), but challenges remain in the use of these products in programs at scale. This paper focuses on two challenges: the need for cheaper formulations using locally available ingredients that are processed in a safe, reliable, and financially sustainable local production facility; and the effective use of these products in large-scale community-based programs. Linear programming tools can be used successfully to design local compositions that are in line with international guidelines, low in cost, and acceptable, and the efficacy of these local formulations in the treatment of MAM was recently demonstrated in Malawi. The production of local formulations for programs at scale relies on the existence of a reliable and efficient local production facility. Technical assistance may be required in the development of sustainable business models at an early stage in the process, taking into account the stringent product quality and safety criteria and the required investments. The use of ready-to-use products, as of any food supplement, in programs at scale will be affected by the practice of household sharing and diversion of these products for other uses. Additional measures can be considered to account for sharing. These products designed for the treatment and prevention of MAM are to be used in community-based programs and should therefore be used in conjunction with other interventions and designed so that they do not replace the intake of other foods and breastmilk. Remaining challenges and implications for the (operations) research agenda are discussed.

Open Source in Education

ERIC Educational Resources Information Center

Lakhan, Shaheen E.; Jhunjhunwala, Kavita

2008-01-01

Educational institutions have rushed to put their academic resources and services online, beginning the global community onto a common platform and awakening the interest of investors. Despite continuing technical challenges, online education shows great promise. Open source software offers one approach to addressing the technical problems in…

Technician Education Yearbook 1984.

ERIC Educational Resources Information Center

Prakken Publications, Inc., Ann Arbor, MI.

This yearbook deals with technician education. Included in a section on new issues, problems, and proposals for technician education are the following papers: "High Technology Challenges the Vocational-Technical Curriculum," by Walter J. Brooking; "Assessment of Technical Competency," by Gordon C. McMahon; "Industry and Education Cooperation…

“Spatial Energetics”: Integrating Data From GPS, Accelerometry, and GIS to Address Obesity and Inactivity

PubMed Central

James, Peter; Jankowska, Marta; Marx, Christine; Hart, Jaime E.; Berrigan, David; Kerr, Jacqueline; Hurvitz, Philip M.; Hipp, J. Aaron; Laden, Francine

2016-01-01

To address the current obesity and inactivity epidemics, public health researchers have attempted to identify spatial factors that influence physical inactivity and obesity. Technologic and methodologic developments have led to a revolutionary ability to examine dynamic, high-resolution measures of temporally matched location and behavior data through GPS, accelerometry, and GIS. These advances allow the investigation of spatial energetics, high–spatiotemporal resolution data on location and time-matched energetics, to examine how environmental characteristics, space, and time are linked to activity-related health behaviors with far more robust and detailed data than in previous work. Although the transdisciplinary field of spatial energetics demonstrates promise to provide novel insights on how individuals and populations interact with their environment, there remain significant conceptual, technical, analytical, and ethical challenges stemming from the complex data streams that spatial energetics research generates. First, it is essential to better understand what spatial energetics data represent, the relevant spatial context of analysis for these data, and if spatial energetics can establish causality for development of spatially relevant interventions. Second, there are significant technical problems for analysis of voluminous and complex data that may require development of spatially aware scalable computational infrastructures. Third, the field must come to agreement on appropriate statistical methodologies to account for multiple observations per person. Finally, these challenges must be considered within the context of maintaining participant privacy and security. This article describes gaps in current practice and understanding, and suggests solutions to move this promising area of research forward. PMID:27528538

Advances in Multi-Sensor Scanning and Visualization of Complex Plants: the Utmost Case of a Reactor Building

NASA Astrophysics Data System (ADS)

Hullo, J.-F.; Thibault, G.; Boucheny, C.

2015-02-01

In a context of increased maintenance operations and workers generational renewal, a nuclear owner and operator like Electricité de France (EDF) is interested in the scaling up of tools and methods of "as-built virtual reality" for larger buildings and wider audiences. However, acquisition and sharing of as-built data on a large scale (large and complex multi-floored buildings) challenge current scientific and technical capacities. In this paper, we first present a state of the art of scanning tools and methods for industrial plants with very complex architecture. Then, we introduce the inner characteristics of the multi-sensor scanning and visualization of the interior of the most complex building of a power plant: a nuclear reactor building. We introduce several developments that made possible a first complete survey of such a large building, from acquisition, processing and fusion of multiple data sources (3D laser scans, total-station survey, RGB panoramic, 2D floor plans, 3D CAD as-built models). In addition, we present the concepts of a smart application developed for the painless exploration of the whole dataset. The goal of this application is to help professionals, unfamiliar with the manipulation of such datasets, to take into account spatial constraints induced by the building complexity while preparing maintenance operations. Finally, we discuss the main feedbacks of this large experiment, the remaining issues for the generalization of such large scale surveys and the future technical and scientific challenges in the field of industrial "virtual reality".

Usefulness of Cone-Beam Computed Tomography and Automatic Vessel Detection Software in Emergency Transarterial Embolization.

PubMed

Carrafiello, Gianpaolo; Ierardi, Anna Maria; Duka, Ejona; Radaelli, Alessandro; Floridi, Chiara; Bacuzzi, Alessandro; de Bucourt, Maximilian; De Marchi, Giuseppe

2016-04-01

This study was designed to evaluate the utility of dual phase cone beam computed tomography (DP-CBCT) and automatic vessel detection (AVD) software to guide transarterial embolization (TAE) of angiographically challenging arterial bleedings in emergency settings. Twenty patients with an arterial bleeding at computed tomography angiography and an inconclusive identification of the bleeding vessel at the initial 2D angiographic series were included. Accuracy of DP-CBCT and AVD software were defined as the ability to detect the bleeding site and the culprit arterial bleeder, respectively. Technical success was defined as the correct positioning of the microcatheter using AVD software. Clinical success was defined as the successful embolization. Total volume of iodinated contrast medium and overall procedure time were registered. The bleeding site was not detected by initial angiogram in 20% of cases, while impossibility to identify the bleeding vessel was the reason for inclusion in the remaining cases. The bleeding site was detected by DP-CBCT in 19 of 20 (95%) patients; in one case CBCT-CT fusion was required. AVD software identified the culprit arterial branch in 18 of 20 (90%) cases. In two cases, vessel tracking required manual marking of the candidate arterial bleeder. Technical success was 95%. Successful embolization was achieved in all patients. Mean contrast volume injected for each patient was 77.5 ml, and mean overall procedural time was 50 min. C-arm CBCT and AVD software during TAE of angiographically challenging arterial bleedings is feasible and may facilitate successful embolization. Staff training in CBCT imaging and software manipulation is necessary.

Synthetic Vision for Lunar and Planetary Landing Vehicles

NASA Technical Reports Server (NTRS)

Williams, Steven P.; Arthur, Jarvis (Trey) J., III; Shelton, Kevin J.; Prinzel, Lawrence J., III; Norman, R. Michael

2008-01-01

The Crew Vehicle Interface (CVI) group of the Integrated Intelligent Flight Deck Technologies (IIFDT) has done extensive research in the area of Synthetic Vision (SV), and has shown that SV technology can substantially enhance flight crew situation awareness, reduce pilot workload, promote flight path control precision and improve aviation safety. SV technology is being extended to evaluate its utility for lunar and planetary exploration vehicles. SV may hold significant potential for many lunar and planetary missions since the SV presentation provides a computer-generated view of the terrain and other significant environment characteristics independent of the outside visibility conditions, window locations, or vehicle attributes. SV allows unconstrained control of the computer-generated scene lighting, terrain coloring, and virtual camera angles which may provide invaluable visual cues to pilots/astronauts and in addition, important vehicle state information may be conformally displayed on the view such as forward and down velocities, altitude, and fuel remaining to enhance trajectory control and vehicle system status. This paper discusses preliminary SV concepts for tactical and strategic displays for a lunar landing vehicle. The technical challenges and potential solutions to SV applications for the lunar landing mission are explored, including the requirements for high resolution terrain lunar maps and an accurate position and orientation of the vehicle that is essential in providing lunar Synthetic Vision System (SVS) cockpit displays. The paper also discusses the technical challenge of creating an accurate synthetic terrain portrayal using an ellipsoid lunar digital elevation model which eliminates projection errors and can be efficiently rendered in real-time.

Chances of short-term cooling trends over Canada for the next decades

NASA Astrophysics Data System (ADS)

Grenier, Patrick; de Elia, Ramon; Chaumont, Diane

2014-05-01

As climate services continue to develop in Quebec, Canada, an increasing number of requests are made for providing information relevant for the near term. As a response, one approach has been to consider short-term cooling trends as a basis for climate products. This project comprises different aspects: technical steps, knowledge transfer, and societal use. Each step does represent a different challenge. The technical part, i.e. producing probabilistic distributions of short-term temperature trends, involves relatively complex scenario construction methods including bias-related post-processing, and access to wide simulation and observation databases. Calculations are performed on 60 CMIP5-based scenarios on a grid covering Canada during the period 2006-2035, and for 5, 10, 15, 20 and 25-year trend durations. Knowledge transfer implies overcoming misinterpretation, given that probabilistic projections based on simulation ensembles are not perfectly related to real-Earth possible outcomes. Finally, societal use of this information remains the biggest challenge. On the one hand, users clearly state their interest in near-term relevant information, and intuitively it seems clear that short-term cooling trends embedded within the long-term warming path should be considered in adaptation plans, for avoiding over-adaptation. On the other hand, the exact way of incorporating such information within a decision-making process has proven not to be obvious. Irrespective of that, the study and communication of short-term cooling chances is necessary for preventing decision-makers to infer from the eventual occurrence of such a trend that global warming isn't happening. The presentation will discuss the three aspects aforementioned.

Putting vulnerability to climate change on the map: a review of approaches, benefits, and risks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Preston, Benjamin L

2011-01-01

There is growing demand among stakeholders across public and private institutions for spatially-explicit information regarding vulnerability to climate change at the local scale. However, the challenges associated with mapping the geography of climate change vulnerability are non-trivial, both conceptually and technically, suggesting the need for more critical evaluation of this practice. Here, we review climate change vulnerability mapping in the context of four key questions that are fundamental to assessment design. First, what are the goals of the assessment? A review of published assessments yields a range of objective statements that emphasize problem orientation or decision-making about adaptation actions. Second,more » how is the assessment of vulnerability framed? Assessments vary with respect to what values are assessed (vulnerability of what) and the underlying determinants of vulnerability that are considered (vulnerability to what). The selected frame ultimately influences perceptions of the primary driving forces of vulnerability as well as preferences regarding management alternatives. Third, what are the technical methods by which an assessment is conducted? The integration of vulnerability determinants into a common map remains an emergent and subjective practice associated with a number of methodological challenges. Fourth, who participates in the assessment and how will it be used to facilitate change? Assessments are often conducted under the auspices of benefiting stakeholders, yet many lack direct engagement with stakeholders. Each of these questions is reviewed in turn by drawing on an illustrative set of 45 vulnerability mapping studies appearing in the literature. A number of pathways for placing vulnerability« less

Machinery health prognostics: A systematic review from data acquisition to RUL prediction

NASA Astrophysics Data System (ADS)

Lei, Yaguo; Li, Naipeng; Guo, Liang; Li, Ningbo; Yan, Tao; Lin, Jing

2018-05-01

Machinery prognostics is one of the major tasks in condition based maintenance (CBM), which aims to predict the remaining useful life (RUL) of machinery based on condition information. A machinery prognostic program generally consists of four technical processes, i.e., data acquisition, health indicator (HI) construction, health stage (HS) division, and RUL prediction. Over recent years, a significant amount of research work has been undertaken in each of the four processes. And much literature has made an excellent overview on the last process, i.e., RUL prediction. However, there has not been a systematic review that covers the four technical processes comprehensively. To fill this gap, this paper provides a review on machinery prognostics following its whole program, i.e., from data acquisition to RUL prediction. First, in data acquisition, several prognostic datasets widely used in academic literature are introduced systematically. Then, commonly used HI construction approaches and metrics are discussed. After that, the HS division process is summarized by introducing its major tasks and existing approaches. Afterwards, the advancements of RUL prediction are reviewed including the popular approaches and metrics. Finally, the paper provides discussions on current situation, upcoming challenges as well as possible future trends for researchers in this field.

User testing and stakeholder feedback contributed to the development of understandable and useful Summary of Findings tables for Cochrane reviews.

PubMed

Rosenbaum, Sarah E; Glenton, Claire; Nylund, Hilde Kari; Oxman, Andrew D

2010-06-01

To develop a Summary of Findings (SoF) table for use in Cochrane reviews that is understandable and useful for health professionals, acceptable to Cochrane Collaboration stakeholders, and feasible to implement. We gathered stakeholder feedback on the format and content of an SoF table from an advisory group of more than 50 participants and their constituencies through e-mail consultations. We conducted user tests using a think-aloud protocol method, collecting feedback from 21 health professionals and researchers in Norway and the UK. We analyzed the feedback, defined problem areas, and generated new solutions in brainstorming workshops. Stakeholders were concerned about precision in the data representation and about production feasibility. User testing revealed unexpected comprehension problems, mainly confusion about what the different numbers referred to (class reference). Resolving the tension between achieving table precision and table simplicity became the main focus of the working group. User testing led to a table more useful and understandable for clinical audiences. We arrived at an SoF table that was acceptable to the stakeholders and in principle feasible to implement technically. Some challenges remain, including presenting continuous outcomes and technical/editorial implementation.

Cellular Force Microscopy for in Vivo Measurements of Plant Tissue Mechanics1[W][OA

PubMed Central

Routier-Kierzkowska, Anne-Lise; Weber, Alain; Kochova, Petra; Felekis, Dimitris; Nelson, Bradley J.; Kuhlemeier, Cris; Smith, Richard S.

2012-01-01

Although growth and morphogenesis are controlled by genetics, physical shape change in plant tissue results from a balance between cell wall loosening and intracellular pressure. Despite recent work demonstrating a role for mechanical signals in morphogenesis, precise measurement of mechanical properties at the individual cell level remains a technical challenge. To address this challenge, we have developed cellular force microscopy (CFM), which combines the versatility of classical microindentation techniques with the high automation and resolution approaching that of atomic force microscopy. CFM’s large range of forces provides the possibility to map the apparent stiffness of both plasmolyzed and turgid tissue as well as to perform micropuncture of cells using very high stresses. CFM experiments reveal that, within a tissue, local stiffness measurements can vary with the level of turgor pressure in an unexpected way. Altogether, our results highlight the importance of detailed physically based simulations for the interpretation of microindentation results. CFM’s ability to be used both to assess and manipulate tissue mechanics makes it a method of choice to unravel the feedbacks between mechanics, genetics, and morphogenesis. PMID:22353572

Enhancing public health outcomes in developing countries: from good policies and best practices to better implementation.

PubMed

Woolcock, Michael

2018-06-01

In rich and poor countries alike, a core challenge is building the state's capability for policy implementation. Delivering high-quality public health and health care-affordably, reliably and at scale, for all-exemplifies this challenge, since doing so requires deftly integrating refined technical skills (surgery), broad logistics management (supply chains, facilities maintenance), adaptive problem solving (curative care), and resolving ideological differences (who pays? who provides?), even as the prevailing health problems themselves only become more diverse, complex, and expensive as countries become more prosperous. However, the current state of state capability in developing countries is demonstrably alarming, with the strains and demands only likely to intensify in the coming decades. Prevailing "best practice" strategies for building implementation capability-copying and scaling putative successes from abroad-are too often part of the problem, while individual training ("capacity building") and technological upgrades (e.g. new management information systems) remain necessary but deeply insufficient. An alternative approach is outlined, one centered on building implementation capability by working iteratively to solve problems nominated and prioritized by local actors.

Proteomics in medical microbiology.

PubMed

Cash, P

2000-04-01

The techniques of proteomics (high resolution two-dimensional electrophoresis and protein characterisation) are widely used for microbiological research to analyse global protein synthesis as an indicator of gene expression. The rapid progress in microbial proteomics has been achieved through the wide availability of whole genome sequences for a number of bacterial groups. Beyond providing a basic understanding of microbial gene expression, proteomics has also played a role in medical areas of microbiology. Progress has been made in the use of the techniques for investigating the epidemiology and taxonomy of human microbial pathogens, the identification of novel pathogenic mechanisms and the analysis of drug resistance. In each of these areas, proteomics has provided new insights that complement genomic-based investigations. This review describes the current progress in these research fields and highlights some of the technical challenges existing for the application of proteomics in medical microbiology. The latter concern the analysis of genetically heterogeneous bacterial populations and the integration of the proteomic and genomic data for these bacteria. The characterisation of the proteomes of bacterial pathogens growing in their natural hosts remains a future challenge.

Observations of Shock Diffusion and Interactions in Supersonic Freestreams with Counterflowing Jets

NASA Technical Reports Server (NTRS)

Daso, Endwell O.; Pritchett, Victor E.; Wang, Ten-See; Blankson, Isiah M.; Auslender, Aaron H.

2006-01-01

One of the technical challenges in long-duration space exploration and interplanetary missions is controlled entry and re-entry into planetary and Earth atmospheres, which requires the dissipation of considerable kinetic energy as the spacecraft decelerates and penetrates the atmosphere. Efficient heat load management of stagnation points and acreage heating remains a technological challenge and poses significant risk, particularly for human missions. An innovative approach using active flow control concept is proposed to significantly modify the external flow field about the spacecraft in planetary atmospheric entry and re-entry in order to mitigate the harsh aerothermal environments, and significantly weaken and disperse the shock-wave system to reduce aerothermal loads and wave drag, as well as improving aerodynamic performance. To explore the potential benefits of this approach, we conducted fundamental experiments in a trisonic blow down wind tunnel to investigate the effects of counterflowing sonic and supersonic jets against supersonic freestreams to gain a better understanding of the flow physics of the interactions of the opposing flows and the resulting shock structure.

Meta-analysis, complexity, and heterogeneity: a qualitative interview study of researchers' methodological values and practices.

PubMed

Lorenc, Theo; Felix, Lambert; Petticrew, Mark; Melendez-Torres, G J; Thomas, James; Thomas, Sian; O'Mara-Eves, Alison; Richardson, Michelle

2016-11-16

Complex or heterogeneous data pose challenges for systematic review and meta-analysis. In recent years, a number of new methods have been developed to meet these challenges. This qualitative interview study aimed to understand researchers' understanding of complexity and heterogeneity and the factors which may influence the choices researchers make in synthesising complex data. We conducted interviews with a purposive sample of researchers (N = 19) working in systematic review or meta-analysis across a range of disciplines. We analysed data thematically using a framework approach. Participants reported using a broader range of methods and data types in complex reviews than in traditional reviews. A range of techniques are used to explore heterogeneity, but there is some debate about their validity, particularly when applied post hoc. Technical considerations of how to synthesise complex evidence cannot be isolated from questions of the goals and contexts of research. However, decisions about how to analyse data appear to be made in a largely informal way, drawing on tacit expertise, and their relation to these broader questions remains unclear.

Climate Change Challenges for Extension Educators: Technical Capacity and Cultural Attitudes

ERIC Educational Resources Information Center

Becerra, Terrie A.; Middendorf, Gerad; Campbell, Amber; Tomlinson, Peter

2016-01-01

We surveyed Extension educators in the southern Great Plains about their attitudes and beliefs regarding climate change, their interactions with constituents surrounding climate change, and challenges they face in engaging constituents on the topic of climate change. Production-oriented and sociocultural challenges in meeting constituents'…

Toxicogenomics: the challenges and opportunities to identify biomarkers, signatures and thresholds to support mode-of-action.

PubMed

Currie, Richard A

2012-08-15

Toxicogenomics (TGx) can be defined as the application of "omics" techniques to toxicology and risk assessment. By identifying molecular changes associated with toxicity, TGx data might assist hazard identification and investigate causes. Early technical challenges were evaluated and addressed by consortia (e.g. ISLI/HESI and the Microarray Quality Control consortium), which demonstrated that TGx gave reliable and reproducible information. The MAQC also produced "best practice on signature generation" after conducting an extensive evaluation of different methods on common datasets. Two findings of note were the need for methods that control batch variability, and that the predictive ability of a signature changes in concert with the variability of the endpoint. The key challenge remaining is data interpretation, because TGx can identify molecular changes that are causal, associated with or incidental to toxicity. Application of Bradford Hill's tests for causation, which are used to build mode of action (MOA) arguments, can produce reasonable hypotheses linking altered pathways to phenotypic changes. However, challenges in interpretation still remain: are all pathway changes equal, which are most important and plausibly linked to toxicity? Therefore the expert judgement of the toxicologist is still needed. There are theoretical reasons why consistent alterations across a metabolic pathway are important, but similar changes in signalling pathways may not alter information flow. At the molecular level thresholds may be due to the inherent properties of the regulatory network, for example switch-like behaviours from some network motifs (e.g. positive feedback) in the perturbed pathway leading to the toxicity. The application of systems biology methods to TGx data can generate hypotheses that explain why a threshold response exists. However, are we adequately trained to make these judgments? There is a need for collaborative efforts between regulators, industry and academia to properly define how these technologies can be applied using appropriate case-studies. Copyright © 2012 Elsevier B.V. All rights reserved.

Primary and revision efficacy of cross-wired metallic stents for endoscopic bilateral stent-in-stent placement in malignant hilar biliary strictures.

PubMed

Lee, T H; Moon, J H; Kim, J H; Park, D H; Lee, S S; Choi, H J; Cho, Y D; Park, S H; Kim, S J

2013-01-01

Endoscopic bilateral drainage for inoperable malignant hilar biliary strictures (HBS) using metal stents is considered to be technically difficult. Furthermore, endoscopic revision of bilateral stenting after occlusion can be challenging. This study was performed to evaluate the long-term efficacy of endoscopic bilateral stent-in-stent placement of cross-wired metallic stents in high-grade malignant HBS and planned endoscopic bilateral revision. A total of 84 patients with inoperable high-grade malignant HBS were enrolled from three academic tertiary referral centers. Two cross-wired metal stents were inserted using a bilateral stent-in-stent placement method. Bilateral endoscopic revision was also performed during follow-up using either identical metal stents or plastic stents. The main outcome measurements were technical and functional success, complications, stent patency, and endoscopic revision efficacy. The technical and clinical success rates of endoscopic bilateral stent-in-stent placement of cross-wired metallic stents were 95.2% (80/84) and 92.9% (78/84), respectively. Median patency (range) and survival were 238 days (10-429) and 256 days (10-1130), respectively. Obstruction of primary bilateral stents occurred in 30.8% (24/78) of patients with functionally successful stent placement. The technical and clinical success rates of planned bilateral endoscopic revision for occluded stents were 83.3% (20/24) and 79.2% (19/24), respectively. For revision, bilateral metallic stents were placed in 11 patients (55.0%); the remaining patients received plastic stents. Palliative endoscopic bilateral stent-in-stent placement of cross-wired metallic stents was effective in patients with inoperable HBS. Revision endoscopic bilateral stenting may be feasible and successful in cases where the primary deployed metal stents are occluded. © Georg Thieme Verlag KG Stuttgart · New York.

Survey of Dust Issues for Lunar Seals and the RESOLVE Project

NASA Technical Reports Server (NTRS)

Proctor, Margaret P.; Dempsey, Paula

2006-01-01

Lunar dust poses a technical challenge for sealing applications on the moon. A survey of seals used in Apollo lunar missions is presented as well as lunar soil characteristics and a description of the lunar environment. Seal requirements and technical challenges for the volatiles characterization oven and hydrogen reduction reaction chamber of the RESOLVE project are discussed. The purpose of the RESOLVE project is to find water or ice in lunar soil and demonstrate the ability to produce water, and hence oxygen and hydrogen, from lunar regolith for life support and propellants.

On the Adaptive Protection of Microgrids: A Review on How to Mitigate Cyber Attacks and Communication Failures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Habib, Hany F; Lashway, Christopher R; Mohammed, Osama A

One main challenge in the practical implementation of a microgrid is the design of an adequate protection scheme in both grid connected and islanded modes. Conventional overcurrent protection schemes face selectivity and sensitivity issues during grid and microgrid faults since the fault current level is different in both cases for the same relay. Various approaches have been implemented in the past to deal with this problem, yet the most promising ones are the implementation of adaptive protection techniques abiding by the IEC 61850 communication standard. This paper presents a critical review of existing adaptive protection schemes, the technical challenges formore » the use of classical protection techniques and the need for an adaptive, smart protection system. However, the risk of communication link failures and cyber security threats still remain a challenge in implementing a reliable adaptive protection scheme. A contingency is needed where a communication issue prevents the relay from adjusting to a lower current level during islanded mode. An adaptive protection scheme is proposed that utilizes energy storage (ES) and hybrid ES (HESS) already available in the network as a mechanism to source the higher fault current. Four common grid ES and HESS are reviewed for their suitability in feeding the fault while some solutions are proposed.« less

Implementing national strategies on antimicrobial resistance in Thailand: potential challenges and solutions.

PubMed

Sommanustweechai, A; Tangcharoensathien, V; Malathum, K; Sumpradit, N; Kiatying-Angsulee, N; Janejai, N; Jaroenpoj, S

2018-04-01

Thailand has developed a national strategic plan on antimicrobial resistance (NSP-AMR) and endorsed by the Cabinet in August 2016. This study reviewed the main contents of the NSP-AMR and the mandates of relevant implementing agencies and identified challenges and recommends actions to mitigate implementation gaps. This study analysed the contents of NSP-AMR, reviewed institutional mandates and assessed the implementation gaps among agencies responsible for NSP-AMR. Two of six strategies are related to monitoring and surveillance of AMR and antimicrobial consumption in human and animal. Two other strategies aim to improve antibiotic stewardship and control the spread of AMR in both clinical and farm settings. The remaining two strategies aim to increase knowledge and public awareness on AMR and establish national governance for inter-sectoral actions. Strategies to overcome implementation challenges are sustaining cross-sectoral policy commitments, effective cross-sectoral coordination using One Health approach, generating evidence which guides policy implementation, and improving enforcement capacities in regulatory authorities. To address AMR, Thailand requires significant improvements in implementation capacities in two dimensions. First, technical capacities among implementing agencies are needed to translate policies into practice. Second, governance and organizational capacities enable effective multi-sectoral actions across human, animal, and environmental sectors. Copyright © 2018 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Global-to-local policy transfer in the introduction of new molecular tuberculosis diagnostics in South Africa.

PubMed

Colvin, C J; Leon, N; Wills, C; van Niekerk, M; Bissell, K; Naidoo, P

2015-11-01

Lack of innovation in diagnostics has contributed to tuberculosis (TB) remaining a global health challenge. It is critical to understand how new diagnostic technologies are translated into policies and how these are implemented. To examine policy transfer for two rapid molecular diagnostic tests, GenoType(®) MDRTBplus and Xpert(®) MTB/RIF, to understand policy development, uptake and implementation in South Africa. A policy transfer analysis framework integrating the key dimensions of policy transfer into one coherent model was used. Two phases of key informant interviews were undertaken with a wide range of stakeholders. Both tests were developed through innovative partnerships and responded to urgent public health needs. GenoType was introduced through a process that was more inclusive than that for Xpert. National policy and planning processes were opaque for both tests. Their implementation, maintenance and expansion suffered from poor communication and coordination, insufficient attention to resource implications, technical challenges and a lack of broader health systems thinking. Our analysis identified the risks and benefits of partnerships for technological innovation, the complex intersections between global and national actors and the impact of health systems on policy transfer, and the risks of rescue- and technology-focused thinking in addressing public health challenges.

Application of GIS technology in public health: successes and challenges.

PubMed

Fletcher-Lartey, Stephanie M; Caprarelli, Graziella

2016-04-01

The uptake and acceptance of Geographic Information Systems (GIS) technology has increased since the early 1990s and public health applications are rapidly expanding. In this paper, we summarize the common uses of GIS technology in the public health sector, emphasizing applications related to mapping and understanding of parasitic diseases. We also present some of the success stories, and discuss the challenges that still prevent a full scope application of GIS technology in the public health context. Geographical analysis has allowed researchers to interlink health, population and environmental data, thus enabling them to evaluate and quantify relationships between health-related variables and environmental risk factors at different geographical scales. The ability to access, share and utilize satellite and remote-sensing data has made possible even wider understanding of disease processes and of their links to the environment, an important consideration in the study of parasitic diseases. For example, disease prevention and control strategies resulting from investigations conducted in a GIS environment have been applied in many areas, particularly in Africa. However, there remain several challenges to a more widespread use of GIS technology, such as: limited access to GIS infrastructure, inadequate technical and analytical skills, and uneven data availability. Opportunities exist for international collaboration to address these limitations through knowledge sharing and governance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andres Liebenthal; Roland Michelitsch; Ethel Tarazona

How effectively has the World Bank Group assisted its clients in enhancing the contribution of the extractive industries to sustainable development? (Extractive industries include oil, gas, and mining of minerals including coals and metals.) This evaluation finds that with its global mandate and experience, comprehensive country development focus, and overarching mission to fight poverty, the World Bank Group is well positioned to help countries overcome the policy, institutional, and technical challenges that prevent them from transforming resource endowments into sustainable benefits. Furthermore, the World Bank Group's achievements are many. On the whole, its extractive industries projects have produced positive economicmore » and financial results, though compliance with its environmental and social safeguards remains a challenge. Its research has broadened and deepened understanding of the causes for the disappointing performance of resource-rich countries. Its guidelines for the mitigation of adverse environmental and social impacts have been widely used and appreciated. More recently, it has begun to address the challenge of country governance with a variety of instruments. The World Bank Group can, however, do much to improve its performance in enhancing the extractive industry sector's contribution to sustainable development and poverty reduction. The report identifies three main areas for improvement - formulating an integrated strategy, strengthening implementation and engagement of stakeholders. 5 annexes.« less

SET: a pupil detection method using sinusoidal approximation

PubMed Central

Javadi, Amir-Homayoun; Hakimi, Zahra; Barati, Morteza; Walsh, Vincent; Tcheang, Lili

2015-01-01

Mobile eye-tracking in external environments remains challenging, despite recent advances in eye-tracking software and hardware engineering. Many current methods fail to deal with the vast range of outdoor lighting conditions and the speed at which these can change. This confines experiments to artificial environments where conditions must be tightly controlled. Additionally, the emergence of low-cost eye tracking devices calls for the development of analysis tools that enable non-technical researchers to process the output of their images. We have developed a fast and accurate method (known as “SET”) that is suitable even for natural environments with uncontrolled, dynamic and even extreme lighting conditions. We compared the performance of SET with that of two open-source alternatives by processing two collections of eye images: images of natural outdoor scenes with extreme lighting variations (“Natural”); and images of less challenging indoor scenes (“CASIA-Iris-Thousand”). We show that SET excelled in outdoor conditions and was faster, without significant loss of accuracy, indoors. SET offers a low cost eye-tracking solution, delivering high performance even in challenging outdoor environments. It is offered through an open-source MATLAB toolkit as well as a dynamic-link library (“DLL”), which can be imported into many programming languages including C# and Visual Basic in Windows OS (www.eyegoeyetracker.co.uk). PMID:25914641

Establishing ecological and social continuities: new challenges to optimize urban watershed management

NASA Astrophysics Data System (ADS)

Mitroi, V.; de Coninck, A.; Vinçon-Leite, B.; Deroubaix, J.-F.

2014-09-01

The (re)construction of the ecological continuity is stated as one of the main objectives of the European Water Framework Directive for watershed management in Europe. Analysing the social, political, technical and scientific processes characterising the implementation of different projects of ecological continuity in two adjacent peri-urban territories in Ile-de-France, we observed science-driven approaches disregarding the social contexts. We show that, in urbanized areas, ecological continuity requires not only important technical and ecological expertise, but also social and political participation to the definition of a common vision and action plan. Being a challenge for both, technical water management institutions and "classical" ecological policies, we propose some social science contributions to deal with ecological unpredictability and reconsider stakeholder resistance to this kind of project.

Planning for planetary protection : challenges beyond Mars

NASA Technical Reports Server (NTRS)

Belz, Andrea P.; Cutts, James A.

2006-01-01

This document summarizes the technical challenges to planetary protection for these targets of interest and outlines some of the considerations, particularly at the system level, in designing an appropriate technology investment strategy for targets beyond Mars.

Machine learning challenges in Mars rover traverse science

NASA Technical Reports Server (NTRS)

Castano, R.; Judd, M.; Anderson, R. C.; Estlin, T.

2003-01-01

The successful implementation of machine learning in autonomous rover traverse science requires addressing challenges that range from the analytical technical realm, to the fuzzy, philosophical domain of entrenched belief systems within scientists and mission managers.

Relative Binding Free Energy Calculations in Drug Discovery: Recent Advances and Practical Considerations.

PubMed

Cournia, Zoe; Allen, Bryce; Sherman, Woody

2017-12-26

Accurate in silico prediction of protein-ligand binding affinities has been a primary objective of structure-based drug design for decades due to the putative value it would bring to the drug discovery process. However, computational methods have historically failed to deliver value in real-world drug discovery applications due to a variety of scientific, technical, and practical challenges. Recently, a family of approaches commonly referred to as relative binding free energy (RBFE) calculations, which rely on physics-based molecular simulations and statistical mechanics, have shown promise in reliably generating accurate predictions in the context of drug discovery projects. This advance arises from accumulating developments in the underlying scientific methods (decades of research on force fields and sampling algorithms) coupled with vast increases in computational resources (graphics processing units and cloud infrastructures). Mounting evidence from retrospective validation studies, blind challenge predictions, and prospective applications suggests that RBFE simulations can now predict the affinity differences for congeneric ligands with sufficient accuracy and throughput to deliver considerable value in hit-to-lead and lead optimization efforts. Here, we present an overview of current RBFE implementations, highlighting recent advances and remaining challenges, along with examples that emphasize practical considerations for obtaining reliable RBFE results. We focus specifically on relative binding free energies because the calculations are less computationally intensive than absolute binding free energy (ABFE) calculations and map directly onto the hit-to-lead and lead optimization processes, where the prediction of relative binding energies between a reference molecule and new ideas (virtual molecules) can be used to prioritize molecules for synthesis. We describe the critical aspects of running RBFE calculations, from both theoretical and applied perspectives, using a combination of retrospective literature examples and prospective studies from drug discovery projects. This work is intended to provide a contemporary overview of the scientific, technical, and practical issues associated with running relative binding free energy simulations, with a focus on real-world drug discovery applications. We offer guidelines for improving the accuracy of RBFE simulations, especially for challenging cases, and emphasize unresolved issues that could be improved by further research in the field.

IT Labs Proof-of-Concept Project: Technical Data Interoperability (TDI) Pathfinder Via Emerging Standards

NASA Technical Reports Server (NTRS)

Conroy, Mike; Gill, Paul; Ingalls, John; Bengtsson, Kjell

2014-01-01

No known system is in place to allow NASA technical data interoperability throughout the whole life cycle. Life Cycle Cost (LCC) will be higher on many developing programs if action isn't taken soon to join disparate systems efficiently. Disparate technical data also increases safety risks from poorly integrated elements. NASA requires interoperability and industry standards, but breaking legacy ways is a challenge.

Up to the Challenge: The Role of Career and Technical Education and 21st Century Skills in College and Career Readiness

ERIC Educational Resources Information Center

Partnership for 21st Century Skills, 2010

2010-01-01

This report highlights the demand for skills in the global economy and the ways in which educators can meet this demand by drawing on both career and technical education and the Partnership for 21st Century Skills' Framework for 21st Century Learning. Twenty-first century skills and career and technical education are essential in every state,…

How to Perfuse: Concepts of Cerebral Protection during Arch Replacement

PubMed Central

Habertheuer, Andreas; Wiedemann, Dominik; Kocher, Alfred; Laufer, Guenther; Vallabhajosyula, Prashanth

2015-01-01

Arch surgery remains undoubtedly among the most technically and strategically challenging endeavors in cardiovascular surgery. Surgical interventions of thoracic aneurysms involving the aortic arch require complete circulatory arrest in deep hypothermia (DHCA) or elaborate cerebral perfusion strategies with varying degrees of hypothermia to achieve satisfactory protection of the brain from ischemic insults, that is, unilateral/bilateral antegrade cerebral perfusion (ACP) and retrograde cerebral perfusion (RCP). Despite sophisticated and increasingly individualized surgical approaches for complex aortic pathologies, there remains a lack of consensus regarding the optimal method of cerebral protection and circulatory management during the time of arch exclusion. Many recent studies argue in favor of ACP with various degrees of hypothermic arrest during arch reconstruction and its advantages have been widely demonstrated. In fact ACP with more moderate degrees of hypothermia represents a paradigm shift in the cardiac surgery community and is widely adopted as an emergent strategy; however, many centers continue to report good results using other perfusion strategies. Amidst this important discussion we review currently available surgical strategies of cerebral protection management and compare the results of recent European multicenter and single-center data. PMID:26713319

Technical considerations in the psychotherapy of traumatized individuals: a psychoanalytic perspective.

PubMed

Nayar, Monisha C

2008-03-01

This paper addresses two specific aspects of clinical technique in the treatment of traumatized individuals. The first aspect involves the creation of a safe holding environment as an essential step for the emergence of trauma-related memories and the containment of the affects accompanying them. Such scenarios may appear in the clinical material only through the workings of "procedural memory." It is therefore important to contain and gradually decipher repetitive patterns of behavior and feelings of shame, guilt and rage that go with them. The second aspect examines the challenges such work poses to the analyst's containing capacities, credulousness and even his or her reality testing within a clinical situation. The resulting instability of the analyst's work ego can make it hard for him or her to remain vigilant yet empathic, and emotionally attuned but analytically skeptical. The analyst's flexibility to be utilized as a transference object, developmental object and self-object remains a critical determinant of the treatment outcome under such circumstances. The paper provides clinical material to illustrate these two aspects of clinical technique.

Sustaining “Meaningful Use” of Health Information Technology in Low-Resource Practices

PubMed Central

Green, Lee A.; Potworowski, Georges; Day, Anya; May-Gentile, Rachelle; Vibbert, Danielle; Maki, Bruce; Kiesel, Leslie

2015-01-01

PURPOSE The implementation of electronic health records (EHRs) has been extensively studied, but their maintenance once implemented has not. The Regional Extension Center (REC) program provides implementation assistance to priority practices—those with limited financial, technical, and organizational resources—but the assistance is time limited. Our objective was to identify potential barriers to maintenance of meaningful use of EHRs in priority primary care practices using a qualitative observational study for federally qualified health centers (FQHCs) and priority practices in Michigan. METHODS We conducted cognitive task analysis (CTA) interviews and direct observations of health information technology implementation in FQHCs. In addition, we conducted semistructured interviews with implementation specialists serving priority practices to detect emergent themes relevant to maintenance. RESULTS Maintaining EHR technology will require ongoing expert technical support indefinitely beyond implementation to address upgrades and security needs. Maintaining meaningful use for quality improvement will require ongoing support for leadership and change management. Priority practices not associated with larger systems lack access to the necessary technical expertise, financial resources, and leverage with vendors to continue alone. Rural priority practices are particularly challenged, because expertise is often not available locally. CONCLUSIONS Priority practices, especially in rural areas, are at high risk for falling on the wrong side of a “digital divide” as payers and regulators enact increasing expectations for EHR use and information management. For those without affiliation to maintain the necessary expert staff, ongoing support will be needed for those practices to remain viable. PMID:25583887

Sustaining "meaningful use" of health information technology in low-resource practices.

PubMed

Green, Lee A; Potworowski, Georges; Day, Anya; May-Gentile, Rachelle; Vibbert, Danielle; Maki, Bruce; Kiesel, Leslie

2015-01-01

The implementation of electronic health records (EHRs) has been extensively studied, but their maintenance once implemented has not. The Regional Extension Center (REC) program provides implementation assistance to priority practices-those with limited financial, technical, and organizational resources-but the assistance is time limited. Our objective was to identify potential barriers to maintenance of meaningful use of EHRs in priority primary care practices using a qualitative observational study for federally qualified health centers (FQHCs) and priority practices in Michigan. We conducted cognitive task analysis (CTA) interviews and direct observations of health information technology implementation in FQHCs. In addition, we conducted semistructured interviews with implementation specialists serving priority practices to detect emergent themes relevant to maintenance. Maintaining EHR technology will require ongoing expert technical support indefinitely beyond implementation to address upgrades and security needs. Maintaining meaningful use for quality improvement will require ongoing support for leadership and change management. Priority practices not associated with larger systems lack access to the necessary technical expertise, financial resources, and leverage with vendors to continue alone. Rural priority practices are particularly challenged, because expertise is often not available locally. Priority practices, especially in rural areas, are at high risk for falling on the wrong side of a "digital divide" as payers and regulators enact increasing expectations for EHR use and information management. For those without affiliation to maintain the necessary expert staff, ongoing support will be needed for those practices to remain viable. © 2015 Annals of Family Medicine, Inc.

An MBSE Approach to Space Suit Development

NASA Technical Reports Server (NTRS)

Cordova, Lauren; Kovich, Christine; Sargusingh, Miriam

2012-01-01

The EVA/Space Suit Development Office (ESSD) Systems Engineering and Integration (SE&I) team has utilized MBSE in multiple programs. After developing operational and architectural models, the MBSE framework was expanded to link the requirements space to the system models through functional analysis and interfaces definitions. By documenting all the connections within the technical baseline, ESSD experienced significant efficiency improvements in analysis and identification of change impacts. One of the biggest challenges presented to the MBSE structure was a program transition and restructuring effort, which was completed successfully in 4 months culminating in the approval of a new EVA Technical Baseline. During this time three requirements sets spanning multiple DRMs were streamlined into one NASA-owned Systems Requirement Document (SRD) that successfully identified requirements relevant to the current hardware development effort while remaining extensible to support future hardware developments. A capability-based hierarchy was established to provide a more flexible framework for future space suit development that can support multiple programs with minimal rework of basic EVA/Space Suit requirements. This MBSE approach was most recently applied for generation of an EMU Demonstrator technical baseline being developed for an ISS DTO. The relatively quick turnaround of operational concepts, architecture definition, and requirements for this new suit development has allowed us to test and evolve the MBSE process and framework in an extremely different setting while still offering extensibility and traceability throughout ESSD projects. The ESSD MBSE framework continues to be evolved in order to support integration of all products associated with the SE&I engine.

Utah's 1988-93 Vocational-Technical Education Master Plan: A Powerful Resource for Human and Economic Development.

ERIC Educational Resources Information Center

Utah State Board of Higher Education, Salt Lake City.

For Utah residents to remain in the forefront or even stay competitive economically, the state's work force must acquire the knowledge and skills that match or exceed those of their most technically advanced competitors. A powerful engine for economic growth is a high-quality system of vocational-technical education. The majority of Utah public…

Challenges of Human Space Flight

NASA Technical Reports Server (NTRS)

Davis, Jeffrey R.; Charles, John B.

2006-01-01

The presentations will be given during the X-Prize symposium, exploring the multi-faceted dimensions of spaceflight ranging from the technical developments necessary to achieve safe routine flight to and from and through space to the new personal business opportunities and economic benefits that will open in space and here on Earth. The symposium will delve into the technical, regulatory, market and financial needs and challenges that must be met in charting and executing the incremental developments leading to Personal Spaceflight and the opening of a Place Called Space. The presentation covers facets of human space flight including descriptions of life in space, the challenges of delivering medical care in space, and the preparations needed for safe and productive human travel to the moon and Mars.

Technical Assistance | NREL

Science.gov Websites

Multi-Wind Heat Smart Grid Project. Advancing Energy Solutions in Alaska NREL provides analysis mission to transfer knowledge and innovation to solve the nation's energy challenges. The goal of this transportation energy efficiency and reduce transportation energy costs State Technical Assistance-solar market

Vertical Lift - Not Just For Terrestrial Flight

NASA Technical Reports Server (NTRS)

Young, Larry A

2000-01-01

Autonomous vertical lift vehicles hold considerable potential for supporting planetary science and exploration missions. This paper discusses several technical aspects of vertical lift planetary aerial vehicles in general, and specifically addresses technical challenges and work to date examining notional vertical lift vehicles for Mars, Titan, and Venus exploration.

Engineering Challenges for Floating Offshore Wind Turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butterfield, S.; Musial, W.; Jonkman, J.

The major objective of this paper is to survey the technical challenges that must be overcome to develop deepwater offshore wind energy technologies and to provide a framework from which the first-order economics can be assessed.

Approach to the E-ELT dome and main structure challenges

NASA Astrophysics Data System (ADS)

Bilbao, Armando; Murga, Gaizka; Gómez, Celia; Llarena, Javier

2014-07-01

The E-ELT as a whole could be classified as an extremely challenging project. More precisely, it should be defined as an array of many different sub-challenges, which comprise technical, logistical and managerial matters. This paper reviews some of these critical challenges, in particular those related to the Dome and the Main Structure, suggesting ways to face them in the most pragmatic way possible. Technical challenges for the Dome and the Main Structure are mainly related to the need to upscale current design standards to an order of magnitude larger design. Trying a direct design escalation is not feasible; it would not work. A design effort is needed to cross hybridize current design standards with technologies coming from other different applications. Innovative design is therefore not a wish but a must. And innovative design comes along with design risk. Design risk needs to be tackled from two angles: on the one hand through thorough design validation analysis and on the other hand through extensive pre-assembly and testing. And, once again, full scale integrated pre-assembly and testing of extremely large subsystems is not always possible. Therefore, defining a comprehensive test plan for critical components, critical subsystems and critical subassemblies becomes essential. Logistical challenges are linked to the erection site. Cerro Armazones is a remote site and this needs to be considered when evaluating transport and erection requirements. But it is not only the remoteness of the site that needs to be considered. The size of both Dome and Main Structure require large construction cranes and a well defined erection plan taking into account pre-assembly strategies, limited plan area utilization, erection sequence, erection stability during intermediate stages and, very specifically, efficient coordination between the Dome and the Main Structure erection processes. Managerial issues pose another set of challenges in this project. Both the size of the project and its special technical characteristics require specific managerial skills. Due to the size of the project it becomes essential to effectively manage and integrate a large number of suppliers and fabricators, of very different nature and geographically distributed. Project management plans need to cope with this situation. Also, extensive on site activities require intensive on site organization in line with large construction management strategies. Finally, the technical edge of the project requires deep technical understanding at management level in order to be able to take sound strategic decisions throughout the project in terms of the overall project quality, cost and schedule.

In Translation: School Leaders Learning in and from Leadership Practice While Confronting Pressing Policy Challenges

ERIC Educational Resources Information Center

Drago-Severson, Eleanor; Maslin-Ostrowski, Patricia

2018-01-01

Background/Context: Worldwide, principals face enormous challenges while translating policies and mandates for which they are accountable into their mission and practice. While some of these school-level challenges are technical, many are adaptive (Heifetz), requiring leaders and those in their care to grow their cognitive and affective…

2017 Exploration Rover Challenge event.

NASA Image and Video Library

2017-03-03

2017 Exploration Rover Challenge events at the U.S. Space and Rocket Center in Huntsville, Alabama. High school and college students from around the U.S. and the world come together for this 2 day event which challenges them to compete for the fastest time as well as technical design of the actual rover itself.

Bioprocessing of plant-derived virus-like particles of Norwalk virus capsid protein under current Good Manufacture Practice regulations

PubMed Central

Lai, Huafang; Chen, Qiang

2012-01-01

Despite the success in expressing a variety of subunit vaccine proteins in plants and the recent stride in improving vaccine accumulation levels by transient expression systems, there is still no plant-derived vaccine that has been licensed for human use. The lack of commercial success of plant-made vaccines lies in several technical and regulatory barriers that remain to be overcome. These challenges include the lack of scalable downstream processing procedures, the uncertainty of regulatory compliance of production processes, and the lack of demonstration of plant-derived products that meet the required standards of regulatory agencies in identity, purity, potency and safety. In this study, we addressed these remaining challenges and successfully demonstrate the ability of using plants to produce a pharmaceutical grade Norwalk virus (NV) vaccine under current Good Manufacture Practice (cGMP) guidelines at multiple gram scales. Our results demonstrate that an efficient and scalable extraction and purification scheme can established for processing virus-like particles (VLP) of NV capsid protein (NVCP). We successfully operated the upstream and downstream NVCP production processes under cGMP regulations. Furthermore, plant-derived NVCP VLP demonstrates the identity, purity, potency and safety that meet the preset release specifications. This material is being tested in a Phase I human clinical trial. This research provides the first report of producing a plant-derived vaccine at scale under cGMP regulations in an academic setting and an important step for plant-produced vaccines to become a commercial reality. PMID:22134876

Continuous remote monitoring of COPD patients-justification and explanation of the requirements and a survey of the available technologies.

PubMed

Tomasic, Ivan; Tomasic, Nikica; Trobec, Roman; Krpan, Miroslav; Kelava, Tomislav

2018-04-01

Remote patient monitoring should reduce mortality rates, improve care, and reduce costs. We present an overview of the available technologies for the remote monitoring of chronic obstructive pulmonary disease (COPD) patients, together with the most important medical information regarding COPD in a language that is adapted for engineers. Our aim is to bridge the gap between the technical and medical worlds and to facilitate and motivate future research in the field. We also present a justification, motivation, and explanation of how to monitor the most important parameters for COPD patients, together with pointers for the challenges that remain. Additionally, we propose and justify the importance of electrocardiograms (ECGs) and the arterial carbon dioxide partial pressure (PaCO 2 ) as two crucial physiological parameters that have not been used so far to any great extent in the monitoring of COPD patients. We cover four possibilities for the remote monitoring of COPD patients: continuous monitoring during normal daily activities for the prediction and early detection of exacerbations and life-threatening events, monitoring during the home treatment of mild exacerbations, monitoring oxygen therapy applications, and monitoring exercise. We also present and discuss the current approaches to decision support at remote locations and list the normal and pathological values/ranges for all the relevant physiological parameters. The paper concludes with our insights into the future developments and remaining challenges for improvements to continuous remote monitoring systems. Graphical abstract ᅟ.

Core Noise Reduction

NASA Technical Reports Server (NTRS)

Hultgren, Lennart S.

2011-01-01

This presentation is a technical summary of and outlook for NASA-internal and NASA-sponsored external research on core (combustor and turbine) noise funded by the Fundamental Aeronautics Program Subsonic Fixed Wing (SFW) Project. Sections of the presentation cover: the SFW system-level noise metrics for the 2015, 2020, and 2025 timeframes; turbofan design trends and their aeroacoustic implications; the emerging importance of core noise and its relevance to the SFW Reduce-Perceived-Noise Technical Challenge; and the current research activities in the core noise area. Recent work1 on the turbine-transmission loss of combustor noise is briefly described, two2,3 new NRA efforts in the core-noise area are outlined, and an effort to develop CMC-based acoustic liners for broadband noise reduction suitable for turbofan-core application is delineated. The NASA Fundamental Aeronautics Program has the principal objective of overcoming today's national challenges in air transportation. The reduction of aircraft noise is critical to enabling the anticipated large increase in future air traffic. The Subsonic Fixed Wing Project's Reduce-Perceived-Noise Technical Challenge aims to develop concepts and technologies to dramatically reduce the perceived aircraft noise outside of airport boundaries.

DOE Advanced Scientific Computing Advisory Subcommittee (ASCAC) Report: Top Ten Exascale Research Challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lucas, Robert; Ang, James; Bergman, Keren

2014-02-10

Exascale computing systems are essential for the scientific fields that will transform the 21st century global economy, including energy, biotechnology, nanotechnology, and materials science. Progress in these fields is predicated on the ability to perform advanced scientific and engineering simulations, and analyze the deluge of data. On July 29, 2013, ASCAC was charged by Patricia Dehmer, the Acting Director of the Office of Science, to assemble a subcommittee to provide advice on exascale computing. This subcommittee was directed to return a list of no more than ten technical approaches (hardware and software) that will enable the development of a systemmore » that achieves the Department's goals for exascale computing. Numerous reports over the past few years have documented the technical challenges and the non¬-viability of simply scaling existing computer designs to reach exascale. The technical challenges revolve around energy consumption, memory performance, resilience, extreme concurrency, and big data. Drawing from these reports and more recent experience, this ASCAC subcommittee has identified the top ten computing technology advancements that are critical to making a capable, economically viable, exascale system.« less

Assessment of the State-of-the-Art of System-Wide Safety and Assurance Technologies

NASA Technical Reports Server (NTRS)

Roychoudhury, Indranil; Reveley, Mary S.; Phojanamongkolkij, Nipa; Leone, Karen M.

2017-01-01

Since its initiation, the System-wide Safety Assurance Technologies (SSAT) Project has been focused on developing multidisciplinary tools and techniques that are verified and validated to ensure prevention of loss of property and life in NextGen and enable proactive risk management through predictive methods. To this end, four technical challenges have been listed to help realize the goals of SSAT, namely (i) assurance of flight critical systems, (ii) discovery of precursors to safety incidents, (iii) assuring safe human-systems integration, and (iv) prognostic algorithm design for safety assurance. The objective of this report is to provide an extensive survey of SSAT-related research accomplishments by researchers within and outside NASA to get an understanding of what the state-of-the-art is for technologies enabling each of the four technical challenges. We hope that this report will serve as a good resource for anyone interested in gaining an understanding of the SSAT technical challenges, and also be useful in the future for project planning and resource allocation for related research.

Aviation Trends Related to Atmospheric Environment Safety Technologies Project Technical Challenges

NASA Technical Reports Server (NTRS)

Reveley, Mary S.; Withrow, Colleen A.; Barr, Lawrence C.; Evans, Joni K.; Leone, Karen M.; Jones, Sharon M.

2014-01-01

Current and future aviation safety trends related to the National Aeronautics and Space Administration's Atmospheric Environment Safety Technologies Project's three technical challenges (engine icing characterization and simulation capability; airframe icing simulation and engineering tool capability; and atmospheric hazard sensing and mitigation technology capability) were assessed by examining the National Transportation Safety Board (NTSB) accident database (1989 to 2008), incidents from the Federal Aviation Administration (FAA) accident/incident database (1989 to 2006), and literature from various industry and government sources. The accident and incident data were examined for events involving fixed-wing airplanes operating under Federal Aviation Regulation (FAR) Parts 121, 135, and 91 for atmospheric conditions related to airframe icing, ice-crystal engine icing, turbulence, clear air turbulence, wake vortex, lightning, and low visibility (fog, low ceiling, clouds, precipitation, and low lighting). Five future aviation safety risk areas associated with the three AEST technical challenges were identified after an exhaustive survey of a variety of sources and include: approach and landing accident reduction, icing/ice detection, loss of control in flight, super density operations, and runway safety.

The Presidential Address to the Association for Career and Technical Education Research: Using Standards to Reform Teacher Preparation in Career and Technical Education--A Successful Reformation

ERIC Educational Resources Information Center

Whittington, M. Susie

2005-01-01

This article presents the presidential address at the annual conference of the Association for Career and Technical Education Research by M. Susie Whittington, ACTER President 2005. The purpose of the presidential address is to examine a current issue facing the profession, and pose challenges to the membership in the context of that issue. In her…

Comparison of Perceived and Technical Healthcare Quality in Primary Health Facilities: Implications for a Sustainable National Health Insurance Scheme in Ghana

PubMed Central

Alhassan, Robert Kaba; Duku, Stephen Opoku; Janssens, Wendy; Nketiah-Amponsah, Edward; Spieker, Nicole; van Ostenberg, Paul; Arhinful, Daniel Kojo; Pradhan, Menno; Rinke de Wit, Tobias F.

2015-01-01

Background Quality care in health facilities is critical for a sustainable health insurance system because of its influence on clients’ decisions to participate in health insurance and utilize health services. Exploration of the different dimensions of healthcare quality and their associations will help determine more effective quality improvement interventions and health insurance sustainability strategies, especially in resource constrained countries in Africa where universal access to good quality care remains a challenge. Purpose To examine the differences in perceptions of clients and health staff on quality healthcare and determine if these perceptions are associated with technical quality proxies in health facilities. Implications of the findings for a sustainable National Health Insurance Scheme (NHIS) in Ghana are also discussed. Methods This is a cross-sectional study in two southern regions in Ghana involving 64 primary health facilities: 1,903 households and 324 health staff. Data collection lasted from March to June, 2012. A Wilcoxon-Mann-Whitney test was performed to determine differences in client and health staff perceptions of quality healthcare. Spearman’s rank correlation test was used to ascertain associations between perceived and technical quality care proxies in health facilities, and ordered logistic regression employed to predict the determinants of client and staff-perceived quality healthcare. Results Negative association was found between technical quality and client-perceived quality care (coef. = -0.0991, p<0.0001). Significant staff-client perception differences were found in all healthcare quality proxies, suggesting some level of unbalanced commitment to quality improvement and potential information asymmetry between clients and service providers. Overall, the findings suggest that increased efforts towards technical quality care alone will not necessarily translate into better client-perceived quality care and willingness to utilize health services in NHIS-accredited health facilities. Conclusion There is the need to intensify client education and balanced commitment to technical and perceived quality improvement efforts. This will help enhance client confidence in Ghana’s healthcare system, stimulate active participation in the national health insurance, increase healthcare utilization and ultimately improve public health outcomes. PMID:26465935

Comparison of Perceived and Technical Healthcare Quality in Primary Health Facilities: Implications for a Sustainable National Health Insurance Scheme in Ghana.

PubMed

Alhassan, Robert Kaba; Duku, Stephen Opoku; Janssens, Wendy; Nketiah-Amponsah, Edward; Spieker, Nicole; van Ostenberg, Paul; Arhinful, Daniel Kojo; Pradhan, Menno; Rinke de Wit, Tobias F

2015-01-01

Quality care in health facilities is critical for a sustainable health insurance system because of its influence on clients' decisions to participate in health insurance and utilize health services. Exploration of the different dimensions of healthcare quality and their associations will help determine more effective quality improvement interventions and health insurance sustainability strategies, especially in resource constrained countries in Africa where universal access to good quality care remains a challenge. To examine the differences in perceptions of clients and health staff on quality healthcare and determine if these perceptions are associated with technical quality proxies in health facilities. Implications of the findings for a sustainable National Health Insurance Scheme (NHIS) in Ghana are also discussed. This is a cross-sectional study in two southern regions in Ghana involving 64 primary health facilities: 1,903 households and 324 health staff. Data collection lasted from March to June, 2012. A Wilcoxon-Mann-Whitney test was performed to determine differences in client and health staff perceptions of quality healthcare. Spearman's rank correlation test was used to ascertain associations between perceived and technical quality care proxies in health facilities, and ordered logistic regression employed to predict the determinants of client and staff-perceived quality healthcare. Negative association was found between technical quality and client-perceived quality care (coef. = -0.0991, p<0.0001). Significant staff-client perception differences were found in all healthcare quality proxies, suggesting some level of unbalanced commitment to quality improvement and potential information asymmetry between clients and service providers. Overall, the findings suggest that increased efforts towards technical quality care alone will not necessarily translate into better client-perceived quality care and willingness to utilize health services in NHIS-accredited health facilities. There is the need to intensify client education and balanced commitment to technical and perceived quality improvement efforts. This will help enhance client confidence in Ghana's healthcare system, stimulate active participation in the national health insurance, increase healthcare utilization and ultimately improve public health outcomes.

Technical Challenges for a Comprehensive Test Ban: A historical perspective to frame the future (Invited)

NASA Astrophysics Data System (ADS)

Wallace, T. C.

2013-12-01

In the summer of 1958 scientists from the Soviet block and the US allies met in Geneva to discuss what it would take to monitor a forerunner to a Comprehensive Test Ban Treaty at the 'Conference of Experts to Study the Possibility of Detecting Violations of a Possible Agreement on Suspension of Nuclear Tests'. Although armed with a limited resume of observations, the conference recommended a multi-phenomenology approach (air sampling, acoustics, seismic and electromagnetic) deployed it a network of 170 sites scattered across the Northern Hemisphere, and hypothesized a detection threshold of 1kt for atmospheric tests and 5kt for underground explosions. The conference recommendations spurred vigorous debate, with strong disagreement with the stated detection hypothesis. Nevertheless, the technical challenges posed lead to a very focused effort to improve facilities, methodologies and, most importantly, research and development on event detection, location and identification. In the ensuing 50 years the various challenges arose and were eventually 'solved'; these included quantifying yield determination to enter a Limited Threshold Test Ban, monitoring broad areas of emerging nuclear nations, and after the mid-1990s lowering the global detection threshold to sub-kiloton levels for underground tests. Today there is both an international monitoring regime (ie, the International Monitoring System, or IMS) and a group of countries that have their own national technical means (NTM). The challenges for the international regime are evolving; the IMS has established itself as a very credible monitoring system, but the demand of a CTBT to detect and identify a 'nuclear test' of diminished size (zero yield) poses new technical hurdles. These include signal processing and understanding limits of resolution, location accuracy, integration of heterogeneous data, and accurately characterizing anomalous events. It is possible to extrapolate past technical advances to predict what should be available by 2020; detection of coupled explosions to 100s of tons for all continental areas, as well as a probabilistic assessment of event identification.

Post-Secondary Occupational Education and the Energy Crisis.

ERIC Educational Resources Information Center

Riendeau, Albert J.

Many implications exist for postsecondary educational institutions in the challenge of arriving at a responsible solution to the energy problem. The intent of the Energy Materials Conservation Education Act of 1975 is to call for a commitment by educators (community colleges, technical institutes, and trade and technical schools) to: (1) help…

Evaluating Instructor Technology Integration in Community and Technical Colleges: A Performance Evaluation Matrix

ERIC Educational Resources Information Center

Del Favero, Marietta; Hinson, Janice M.

2007-01-01

The press for implementing technology based instructional delivery systems in community and technical colleges is well documented. Yet faculty face numerous challenges in integrating technology into instruction (AL-Bataineh & Brooks, 2003; Groves & Zemel, 2000; Khoury, 1997). Stimulating faculty ownership in technology, diffusion of technology use…

Definition of Intervener Services and Interveners in Educational Settings. Technical Report

ERIC Educational Resources Information Center

National Consortium on Deaf-Blindness, 2013

2013-01-01

This technical report synthesizes the process and information used by National Consortium on Deaf-Blindness (NCDB) in the development of a consistently applied definition of intervener services. It addresses challenges and questions, provides comparisons between interveners and paraprofessionals, and offers definitions, roles and concepts used by…

Parallels in Arts Education and CTE: Some Guiding Reflections

ERIC Educational Resources Information Center

Hull, Bradley J.

2010-01-01

Many forces shape the current national conversation regarding career and technical education (CTE). Perkins IV guides the discussion through concepts such as challenging academic and technical standards; high skill, high wage, or high demand occupations; and programs of study. Workforce development and training, the economic recession,…

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2010 CFR

2010-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

Diving into Real World Challenges

ERIC Educational Resources Information Center

Saldana, Matt; Rodden, Leslie

2012-01-01

In this article, the authors discuss how educators can engage students in real world learning using their academic knowledge and technical skills. They describe how school districts have discovered that the world of robotics can help students use technical skills to solve simulated problems found in the real world, while understanding the…

Making Advanced Computer Science Topics More Accessible through Interactive Technologies

ERIC Educational Resources Information Center

Shao, Kun; Maher, Peter

2012-01-01

Purpose: Teaching advanced technical concepts in a computer science program to students of different technical backgrounds presents many challenges. The purpose of this paper is to present a detailed experimental pedagogy in teaching advanced computer science topics, such as computer networking, telecommunications and data structures using…

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2013 CFR

2013-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2012 CFR

2012-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2014 CFR

2014-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

GREEN KIT: A MODULAR, VARIABLE APPLICATION SYSTEM FOR SUSTAINABLE COOLING

EPA Science Inventory

Definition of technical challenge to sustainability One of the challenges to sustainability is to build shelters that provide human comfort (people) using limited resources (prosperity) and minimum environment impact (planet). Current practices in building ...

Positivists, Postmodernists, Aristotelians, and the Challenger Disaster.

ERIC Educational Resources Information Center

Walzer, Arthur E.; Gross, Alan

1994-01-01

Examines the deliberations prior to the Challenger disaster from the perspective of three major approaches in recent scholarship in rhetoric as applied to technical communications: positivism, postmodernistic social constructionism, and classical Aristotelianism. Champions an approach based on Aristotle's "Rhetoric." (HB)

WASTE TO VALUE: INCORPORATING INDUSTRIAL SYMBIOSIS FOR SUSTAINABLE INFRASTRUCTURE

EPA Science Inventory

Technical Challenge: Investigators will examine the role of technology innovations as well as environmental justice (EJ) obligations in initiating and implementing urban-industrial symbiosis in Commerce City (CC), CO. The sustainability challenge invol...

Genomics and breeding in food crops

USDA-ARS?s Scientific Manuscript database

Plant biology is in the midst of a revolution. The generation of tremendous volumes of sequence information introduce new technical challenges into plant biology and agriculture. The relatively new field of bioinformatics addresses these challenges by utilizing efficient data management strategies;...

Digital government and public health.

PubMed

Fountain, Jane E

2004-10-01

Digital government is typically defined as the production and delivery of information and services inside government and between government and the public using a range of information and communication technologies. Two types of government relationships with other entities are government-to-citizen and government-to-government relationships. Both offer opportunities and challenges. Assessment of a public health agency's readiness for digital government includes examination of technical, managerial, and political capabilities. Public health agencies are especially challenged by a lack of funding for technical infrastructure and expertise, by privacy and security issues, and by lack of Internet access for low-income and marginalized populations. Public health agencies understand the difficulties of working across agencies and levels of government, but the development of new, integrated e-programs will require more than technical change - it will require a profound change in paradigm.

Analysis of Aviation Safety Reporting System Incident Data Associated With the Technical Challenges of the Vehicle Systems Safety Technology Project

NASA Technical Reports Server (NTRS)

Withrow, Colleen A.; Reveley, Mary S.

2014-01-01

This analysis was conducted to support the Vehicle Systems Safety Technology (VSST) Project of the Aviation Safety Program (AVsP) milestone VSST4.2.1.01, "Identification of VSST-Related Trends." In particular, this is a review of incident data from the NASA Aviation Safety Reporting System (ASRS). The following three VSST-related technical challenges (TCs) were the focus of the incidents searched in the ASRS database: (1) Vechicle health assurance, (2) Effective crew-system interactions and decisions in all conditions; and (3) Aircraft loss of control prevention, mitigation, and recovery.

Challenges and Opportunities in Genome-Wide Environmental Interaction (GWEI) studies

PubMed Central

Aschard, Hugues; Lutz, Sharon; Maus, Bärbel; Duell, Eric J.; Fingerlin, Tasha; Chatterjee, Nilanjan; Kraft, Peter; Van Steen, Kristel

2012-01-01

The interest in performing gene-environment interaction studies has seen a significant increase with the increase of advanced molecular genetics techniques. Practically, it became possible to investigate the role of environmental factors in disease risk and hence to investigate their role as genetic effect modifiers. The understanding that genetics is important in the uptake and metabolism of toxic substances is an example of how genetic profiles can modify important environmental risk factors to disease. Several rationales exist to set up gene-environment interaction studies and the technical challenges related to these studies – when the number of environmental or genetic risk factors is relatively small – has been described before. In the post-genomic era, it is now possible to study thousands of genes and their interaction with the environment. This brings along a whole range of new challenges and opportunities. Despite a continuing effort in developing efficient methods and optimal bioinformatics infrastructures to deal with the available wealth of data, the challenge remains how to best present and analyze Genome-Wide Environmental Interaction (GWEI) studies involving multiple genetic and environmental factors. Since GWEIs are performed at the intersection of statistical genetics, bioinformatics and epidemiology, usually similar problems need to be dealt with as for Genome-Wide Association gene-gene Interaction (GWAI) studies. However, additional complexities need to be considered which are typical for large-scale epidemiological studies, but are also related to “joining” two heterogeneous types of data in explaining complex disease trait variation or for prediction purposes. PMID:22760307

Soft skills and dental education.

PubMed

Gonzalez, M A G; Abu Kasim, N H; Naimie, Z

2013-05-01

Soft skills and hard skills are essential in the practice of dentistry. While hard skills deal with technical proficiency, soft skills relate to a personal values and interpersonal skills that determine a person's ability to fit in a particular situation. These skills contribute to the success of organisations that deal face-to-face with clients. Effective soft skills benefit the dental practice. However, the teaching of soft skills remains a challenge to dental schools. This paper discusses the different soft skills, how they are taught and assessed and the issues that need to be addressed in their teaching and assessment. The use of the module by the Faculty of Dentistry, University of Malaya for development of soft skills for institutions of higher learning introduced by the Ministry of Higher Education, Malaysia. © 2013 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

The Microbiome and the Respiratory Tract

PubMed Central

Dickson, Robert P.; Erb-Downward, John R.; Martinez, Fernando J.; Huffnagle, Gary B.

2016-01-01

Although the notion that “the normal lung is free from bacteria” remains common in textbooks, it is virtually always stated without citation or argument. The lungs are constantly exposed to diverse communities of microbes from the oropharynx and other sources, and over the past decade, novel culture-independent techniques of microbial identification have revealed that the lungs, previously considered sterile in health, harbor diverse communities of microbes. In this review, we describe the topography and population dynamics of the respiratory tract, both in health and as altered by acute and chronic lung disease. We provide a survey of current techniques of sampling, sequencing, and analysis of respiratory microbiota and review technical challenges and controversies in the field. We review and synthesize what is known about lung microbiota in various diseases and identify key lessons learned across disease states. PMID:26527186

Human exposure limits to hypergolic fuels

NASA Technical Reports Server (NTRS)

Garcia, H. D.; James, J. T.; Limero, T. F.

1992-01-01

Over the past four decades, many studies have been conducted on the toxicities of the rocket propellants hydrazine (HZ) and monomethylhydrazine (MH). Numerous technical challenges have made it difficult to unambiguously interpret the results of these studies, and there is considerable divergence between results obtained by different investigators on the inhalation concentrations (MAC's) for each toxic effect inducible by exposure to hypergolic fuels in spacecraft atmospheres, NASA undertook a critical review of published and unpublished investigations on the toxicities of these compounds. The current state of the art practices for similar studies. While many questions remain unanswered, MAC's were determined using the best available data for a variety of toxic endpoints for potential continuous exposure durations ranging from 1 hour to 180 days. Spacecraft MAC's (SMAC's) were set for each compound based on the most sensitive toxic endpoint at each exposure duration.

NASA,FAA,ONERA Swept-Wing Icing and Aerodynamics: Summary of Research and Current Status

NASA Technical Reports Server (NTRS)

Broeren, Andy

2015-01-01

NASA, FAA, ONERA, and other partner organizations have embarked on a significant, collaborative research effort to address the technical challenges associated with icing on large scale, three-dimensional swept wings. These are extremely complex phenomena important to the design, certification and safe operation of small and large transport aircraft. There is increasing demand to balance trade-offs in aircraft efficiency, cost and noise that tend to compete directly with allowable performance degradations over an increasing range of icing conditions. Computational fluid dynamics codes have reached a level of maturity that they are being proposed by manufacturers for use in certification of aircraft for flight in icing. However, sufficient high-quality data to evaluate their performance on iced swept wings are not currently available in the public domain and significant knowledge gaps remain.

Surface-enhanced Raman spectroscopy and homeland security: a perfect match?

PubMed

Golightly, Rebecca S; Doering, William E; Natan, Michael J

2009-10-27

This Nano Focus article reviews recent developments in surface-enhanced Raman spectroscopy (SERS) and its application to homeland security. It is based on invited talks given at the "Nanorods and Microparticles for Homeland Security" symposium, which was organized by one of the authors and presented at the 238th ACS National Meeting and Exhibition in Washington, DC. The three-day symposium included approximately 25 experts from academia, industry, and national laboratories and included both SERS and non-SERS approaches to detection of chemical and biological substances relevant to homeland security, as well as fundamental advances. Here, we focus on SERS and how it is uniquely positioned to have an impact in a field whose importance is increasing rapidly. We describe some technical challenges that remain and offer a glimpse of what form solutions might take.

Technical and Organizational Lessons Learned From More Than One Decade of the International GNSS Service Global Tracking Network

NASA Astrophysics Data System (ADS)

Moore, A. W.

2007-12-01

The International GNSS Service (IGS) is a voluntary collaboration of more than 200 worldwide agencies that pool resources to generate precise GPS and GLONASS products. The foundation of the IGS is a global network of 385 permanent, continuous, geodetic-quality stations independently operated by about 100 agencies. The IGS Central Bureau develops minimum functional requirements and operational standards that enable the individual stations' data to be used coherently in global analyses, but the IGS remains vendor neutral, leaving procurement decisions and implementation details to the individual agencies. The IGS network is hence quite heterogeneous in instrumentation, station management strategies, and culture; these diversities bring both strengths and challenges in coordination. This presentation will detail the IGS's approaches, successes, and opportunities for improvement in coordinating and monitoring the collaborative network.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heitzenroeder, P.; Dudek, Lawrence E.; Brooks, Arthur W.

The National Compact Stellarator Experiment, NCSX, is being constructed at the Princeton Plasma Physics Laboratory (PPPL) in partnership with the Oak Ridge national Laboratory. The goal of NCSX is to provide the understanding necessary to develop an attractive, disruption free, steady state compact stellaratorbased reactor design. This paper describes the recently revised designs of the critical interfaces between the modular coils, the construction solutions developed to meet assembly tolerances, and the recently revised trim coil system that provides the required compensation to correct for the “as built” conditions and to allow flexibility in the disposition of as-built conditions. In May,more » 2008, the sponsor decided to terminate the NCSX project due to growth in the project’s cost and schedule estimates. However significant technical challenges in design and construction were overcome, greatly reducing the risk in the remaining work to complete the project.« less

DCE-MRI, DW-MRI, and MRS in Cancer: Challenges and Advantages of Implementing Qualitative and Quantitative Multi-parametric Imaging in the Clinic

PubMed Central

Winfield, Jessica M.; Payne, Geoffrey S.; Weller, Alex; deSouza, Nandita M.

2016-01-01

Abstract Multi-parametric magnetic resonance imaging (mpMRI) offers a unique insight into tumor biology by combining functional MRI techniques that inform on cellularity (diffusion-weighted MRI), vascular properties (dynamic contrast-enhanced MRI), and metabolites (magnetic resonance spectroscopy) and has scope to provide valuable information for prognostication and response assessment. Challenges in the application of mpMRI in the clinic include the technical considerations in acquiring good quality functional MRI data, development of robust techniques for analysis, and clinical interpretation of the results. This article summarizes the technical challenges in acquisition and analysis of multi-parametric MRI data before reviewing the key applications of multi-parametric MRI in clinical research and practice. PMID:27748710

Centennial Challenges

NASA Image and Video Library

2010-02-26

Doug Comstock, NASA's Director, Innovative Partnership Office, speaks during a ceremony for winners and participants of NASA’s 2009 Centennial Challenges, Friday, Feb. 26, 2010, at NASA Headquarters in Washington. The year-long competition addresses a range of technical challenges that support NASA's missions in aeronautics and space with a goal of encouraging novel solutions from non-traditional sources. Photo Credit: (NASA/Paul E. Alers)

Challenges in Fingertip Replantation

PubMed Central

Kim, Jin-Soo; Yang, Jae-Won; Lee, Dong-Chul; Ki, Sae-Hwi; Roh, Si-Young

2013-01-01

Fingertip amputation is a challenging injury to manage. Among various reconstructive procedures, replantation results in superior outcome, but is seldom considered in many institutions. From the identification of vessel ends to reanastomosis of the submillimeter vessels, fingertip's highly specialized anatomy requires technical excellence. By addressing these anatomic challenges, fingertip replantation can be a routine reconstructive option for microvascular surgeons. PMID:24872765

Transesophageal echocardiography and intracardiac echocardiography differently predict potential technical challenges or failures of interatrial shunts catheter-based closure.

PubMed

Rigatelli, Gianluca; Rigateli, Gianluca; Cardaioli, Paolo; Braggion, Gabriele; Aggio, Silvio; Giordan, Massimo; Magro, Beatrice; Nascimben, Alberto; Favaro, Alberto; Roncon, Loris; Rincon, Loris

2007-02-01

We sought to prospectively assess the role of transesophageal (TEE) and intracardiac echocardiography (ICE) in detecting potential technical difficulties or failures in patients submitted to interatrial shunts percutaneous closure. We prospectively enrolled 46 consecutive patients (mean age 35+/-28, 8 years, 30 female) referred to our center for catheter-based closure of interatrial shunts. All patients were screened with TEE before the intervention. Patients who met the inclusion criteria underwent ICE study before the closure attempt (40 patients). TEE detected potential technical difficulties in 22.5% (9/40) patients, whereas ICE detected technical difficulties in 32.5% (13/40 patients). In patients with positive TEE/ICE the procedural success (92.4% versus 100% and, P = ns) and follow-up failure rate (7.7% versus 0%, P = ns) were similar to patients with negative TEE/ICE, whereas the fluoroscopy time (7 +/- 1.2 versus 5 +/- 0.7 minutes, P < 0.03), the procedural time (41 +/- 4.1 versus 30 +/- 8.2 minutes, P +/- 0.03), and technical difficulties rate (23.1% versus 0%, P = 0.013) were higher. Differences between ICE and TEE in the evaluation of rims, measurement of ASD or fossa ovalis, and detection of venous valve and embryonic septal membrane remnants impacted on technical challenges and on procedural and fluoroscopy times but did not influence the success rate and follow-up failure rate.

BI Project Success

ERIC Educational Resources Information Center

Tracey, Graham; Riha, James

2009-01-01

Managing business intelligence (BI) projects in higher education is a formidable responsibility that challenges even the most experienced technical project managers. Data source dependencies, uncertain data quality, changing information requirements, and urgency for actionable information are but a few examples among the multitude of challenges.…

Legal Barriers to the Growth of Health Information Exchange-Boulders or Pebbles?

PubMed

Mello, Michelle M; Adler-Milstein, Julia; Ding, Karen L; Savage, Lucia

2018-03-01

Policy Points: Historically, in addition to economic and technical hurdles, state and federal health information privacy laws have been cited as a significant obstacle to expanding electronic health information exchange (HIE) in the United States. Our review finds that over the past decade, several helpful developments have ameliorated the legal barriers to HIE, although variation in states' patient consent requirements remains a challenge. Today, health care providers' complaints about legal obstacles to HIE may be better understood as reflecting concerns about the economic and competitive risks of information sharing. Although the clinical benefits of exchanging patients' health information electronically across providers have long been recognized, participation in health information exchange (HIE) has lagged behind adoption of electronic health records. Barriers erected by federal and state health information privacy law have been cited as a leading reason for the slow progress. A comprehensive assessment of these issues has not been undertaken for nearly a decade, despite a number of salient legal developments. Analysis of federal and state health information privacy statutes and regulations and secondary materials. Although some legal barriers to HIE persist, many have been ameliorated-in some cases, simply through improved understanding of what the law actually requires. It is now clear that the Health Insurance Portability and Accountability Act presents no obstacles to electronically sharing protected health information for treatment purposes and does not hold providers who properly disclose information liable for privacy breaches by recipients. The failure of federal efforts to establish a unique patient identifier number does slow HIE by inhibiting optimal matching of patient records, but other action to facilitate matching will be taken under the 21st Century Cures Act. The Cures Act also creates the legal architecture to begin to combat "information blocking." Varying patient consent requirements under federal and state law are the most important remaining legal barrier to HIE progress. However, federal rules relating to disclosure of substance-abuse treatment information were recently liberalized, and development of a technical standard, Data Segmentation for Privacy, or DS4P, now permits sensitive data requiring special handling to be segmented within a patient's record. Even with these developments, state-law requirements for patient consent remain daunting to navigate. Although patient consent requirements make HIE challenging, providers' expressed worries about legal barriers to participating in HIE likely primarily reflect concerns that are economically motivated. Lowering the cost of HIE or increasing financial incentives may boost provider participation more than further reducing legal barriers. © 2018 Milbank Memorial Fund.

An approach to knowledge structuring for advanced phases of the Technical and Management Information System (TMIS)

NASA Technical Reports Server (NTRS)

Goranson, H. T.

1986-01-01

The Technical and Management Information System (TMIS) must employ on enlightened approach to its object structure, but basic issues in conceptual structuring remain to be resolved. Sirius outlines the necessary agenda and reports on progress toward solutions.

75 FR 41421 - Notification of Completeness of the Department of Energy's Compliance Recertification Application...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-16

... (CRA or ``application'') for the Waste Isolation Pilot Plant (WIPP) is complete. EPA provided written... disposal regulations. EPA is now engaged in the full technical review that will determine if WIPP remains... technical difficulties and cannot contact [[Page 41422

76 FR 72666 - Pipeline Safety: Expanding the Use of Excess Flow Valves in Gas Distribution Systems to...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-25

... technical feasibility and cost of the installation of such valves; (D) The public safety benefits of the... public comment regarding the technical challenges, and the potential costs and the potential benefits of... a cost-benefit perspective. DATES: Persons interested in submitting written comments on this ANPRM...

Replacing Technically Skilled Workers: Challenges and Suggestions

ERIC Educational Resources Information Center

Evanciew, Cheryl E. P.; Wither, Steven V.

2004-01-01

Throughout the early 1900s, the United States could either find technically skilled workers based upon their backgrounds or was able to train workers quickly. Farmers, military personnel, and other sources of skilled workers were available to fill the needs of the workforce. These sources of readily available skilled workers are no longer as…

Verification of Accurate Technical Insight: A Prerequisite for Self-Directed Surgical Training

ERIC Educational Resources Information Center

Hu, Yinin; Kim, Helen; Mahmutovic, Adela; Choi, Joanna; Le, Ivy; Rasmussen, Sara

2015-01-01

Simulation-based surgical skills training during preclinical education is a persistent challenge due to time constraints of trainees and instructors alike. Self-directed practice is resource-efficient and flexible; however, insight into technical proficiency among trainees is often lacking. The purpose of this study is to prospectively assess the…

Education Student Perceptions of Virtual Reality as a Learning Tool

ERIC Educational Resources Information Center

Domingo, Jelia R.; Bradley, Elizabeth Gates

2018-01-01

The purpose of this study was to ascertain student perceptions of the use and value of three-dimensional virtual environments. A grounded theory approach was used to gather and examine data. Just over half of student participants reported positive experiences. However, most experienced technical difficulties. Despite the technical challenges of…

Teacher Collaborative Curriculum Design in Technical Vocational Colleges: A Strategy for Maintaining Curriculum Consistency?

ERIC Educational Resources Information Center

Albashiry, Nabeel M.; Voogt, Joke M.; Pieters, Jules M.

2015-01-01

The Technical Vocational Education and Training (TVET) curriculum requires continuous renewal and constant involvement of stakeholders in the redesign process. Due to a lack of curriculum design expertise, TVET institutions in developing contexts encounter challenges maintaining and advancing the quality and relevance of their programmes to the…

College Readiness and Workforce Challenges

ERIC Educational Resources Information Center

Evans, Thomas G.; Cook, Harry J.

2011-01-01

One of the key points of agreement among educators is that highly successful schools must disseminate best practices so that all can benefit. Eastern Technical High School, part of Baltimore County (MD) Public Schools, is a career and technical education (CTE) high school where students gain the knowledge and skills they need to pursue a career in…

Technical and Vocational Education and Training (TVET): Understanding the Nigerian Experience

ERIC Educational Resources Information Center

Dike, Victor Ebipuruonwu

2013-01-01

The descriptive mixed-methods study explores and describes the challenges and prospects of the growth and development of technical and vocational education and training (TVET) schools and science-based technology education in Nigeria. It is not understood how Nigerians in the United States perceive the impacts of governmental policies on education…

Challenges and Rewards of Teaching Intercultural Communication in a Technical Writing Course: A Case Study

ERIC Educational Resources Information Center

Cardenas, Diana L.

2012-01-01

Community-based projects immerse technical writing students in intercultural communication, addressing local needs and shaping documents in human terms. Students at a South Texas university work to establish communication with clients in a city-county health department to create effective documents and disseminate family health legislation. To…

Globalization, Critical Post-Colonialism and Career and Technical Education in Africa: Challenges and Possibilities

ERIC Educational Resources Information Center

Goura, Tairou

2012-01-01

In Sub-Saharan Africa (SSA), technical and vocational education and training (TVET) is central to political discourses and educational concerns as a means for economic development, poverty alleviation, youth employment, and social mobility. Yet, there is an intriguing contradiction between this consideration and the real attention dedicated to…

CareerTech VISION 2012--Transforming CTE Together

ERIC Educational Resources Information Center

Bray, Janet B.

2012-01-01

As the leader in career and technical education (CTE), the Association for Career and Technical Education (ACTE) understands the ongoing challenges faced by the CTE community. That is why ACTE has created CareerTech VISION 2012, a bold and visionary event that addresses the evolving needs of the global society and meets all individual and…

Technical College Teachers Sharing Their Knowledge: Does Leadership, Institutional Factors or Barriers Predict Their Practices?

ERIC Educational Resources Information Center

Tahir, Lokman Mohd; Musah, Muhamad Berhanddin; Abdullah, Abdul Halim; Musta'amal, Aede Hatib; Abdullah, Mohd Hazim Asran

2016-01-01

This study determines the preferable leadership practised by colleges' directors, institutional factors and challenges encountered in knowledge sharing in Malaysian technical higher learning institutions (HLIs). Using a pragmatic mixed-method strand, we obtained 212 teachers and instructors' viewpoints on knowledge sharing factors and barriers.…

A Tanzanian Perspective of the Technical Aspects of IT Service Management Education

ERIC Educational Resources Information Center

Kemppainen, Jyri; Tedre, Matti; Sutinen, Erkki

2012-01-01

Information technology (IT) professionals face markedly different kinds of challenges in developing countries from the ones in developed countries. Based on the research literature and our fourteen years of fieldwork in Iringa, Tanzania, we have identified eight groups of technical characteristics of IT work that significantly affect the work of…

Laparoendoscopic single site (LESS) in vivo suturing using a magnetic anchoring and guidance system (MAGS) camera in a porcine model: impact on ergonomics and workload.

PubMed

Yin, Gang; Han, Woong Kyu; Faddegon, Stephen; Tan, Yung Khan; Liu, Zhuo-Wei; Olweny, Ephrem O; Scott, Daniel J; Cadeddu, Jeffrey A

2013-01-01

To compare the ergonomics and workload of the surgeon during single-site suturing while using the magnetic anchoring and guidance system (MAGS) camera vs a conventional laparoscope. Seven urologic surgeons were enrolled and divided into an expert group (n=2) and a novice group (n=5) according to their laparoendoscopic single-site (LESS) experience. Each surgeon performed 2 conventional LESS and 2 MAGS camera-assisted LESS vesicostomy closures in a porcine model. A Likert scale (scoring 1-5) questionnaire assessing workload, ergonomics, technical difficulty, visualization, and needle handling, as well as a validated National Aeronautics and Space Administration Task Load Index (NASA-TLX) questionnaire were used to evaluate the tasks and workloads. MAGS LESS suturing was universally favored by expert and novice surgeons compared with conventional LESS in workload (3.4 vs 4.2), ergonomics (3.4 vs 4.4), technical challenge (3.3 vs 4.3), visualization (2.4 vs 3.3), and needle handling (3.1 vs 3.9 respectively; P<.05 for all categories). Surgeon NASA-TLX assessments found MAGS LESS suturing significantly decreased the workload in physical demand (P=.004), temporal demand (P=.017), and effort (P=.006). External instrument clashing was significantly reduced in MAGS LESS suturing (P<.001). The total operative time of MAGS LESS suturing was comparable to that of conventional LESS (P=.89). MAGS camera technology significantly decreased surgeon workload and improved ergonomics. Nevertheless, LESS suturing and knot tying remains a challenging task that requires training, regardless of which camera is used. Copyright © 2013 Elsevier Inc. All rights reserved.

Use of Evidence-Based Practices and Resources Among Comprehensive Cancer Control Programs.

PubMed

Steele, C Brooke; Rose, John M; Chovnick, Gary; Townsend, Julie S; Stockmyer, Chrisandra K; Fonseka, Jamila; Richardson, Lisa C

2015-01-01

While efforts to promote use of evidence-based practices (EBPs) for cancer control have increased, questions remain whether this will result in widespread adoption of EBPs (eg, Guide to Community Preventive Services interventions) by comprehensive cancer control (CCC) programs. To examine use of EBPs among CCC programs to develop cancer control plans and select interventions. Conducted Web-based surveys of and telephone interviews with CCC program staff between March and July 2012. CCC programs funded by the Centers for Disease Control and Prevention's National Comprehensive Cancer Control Program (NCCCP). Sixty-one CCC program directors. 1) Use of and knowledge/attitudes about EBPs and related resources and 2) EBP-related technical assistance needs. Seventy-five percent of eligible program directors reported use of EBPs to a moderate or great extent to address program objectives. Benefits of using EBPS included their effectiveness has been proven, they are an efficient use of resources, and they lend credibility to an intervention. Challenges to using EBPs included resource limitations, lack of culturally appropriate interventions, and limited skills adapting EBPs for local use. Most respondents had heard of and used Web sites for The Guide to Community Preventive Services (95% and 91%, respectively) and Cancer Control P.L.A.N.E.T. (98% and 75%, respectively). Training needs included how to adapt an EBP and its materials for cultural appropriateness (state 78%, tribe 86%, territory 80%) and how to maintain the fidelity of an EBP (state 75%, tribe 86%, territory 60%). While awareness, knowledge, and use of EBPs and related resources are high, respondents identified numerous challenges and training needs. The findings from this study may be used to enhance technical assistance provided to NCCCP grantees related to selecting and implementing EBPs.

Usefulness of Cone-Beam Computed Tomography and Automatic Vessel Detection Software in Emergency Transarterial Embolization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carrafiello, Gianpaolo, E-mail: gcarraf@gmail.com; Ierardi, Anna Maria, E-mail: amierardi@yahoo.it; Duka, Ejona, E-mail: ejonaduka@hotmail.com

BackgroundThis study was designed to evaluate the utility of dual phase cone beam computed tomography (DP-CBCT) and automatic vessel detection (AVD) software to guide transarterial embolization (TAE) of angiographically challenging arterial bleedings in emergency settings.MethodsTwenty patients with an arterial bleeding at computed tomography angiography and an inconclusive identification of the bleeding vessel at the initial 2D angiographic series were included. Accuracy of DP-CBCT and AVD software were defined as the ability to detect the bleeding site and the culprit arterial bleeder, respectively. Technical success was defined as the correct positioning of the microcatheter using AVD software. Clinical success was definedmore » as the successful embolization. Total volume of iodinated contrast medium and overall procedure time were registered.ResultsThe bleeding site was not detected by initial angiogram in 20 % of cases, while impossibility to identify the bleeding vessel was the reason for inclusion in the remaining cases. The bleeding site was detected by DP-CBCT in 19 of 20 (95 %) patients; in one case CBCT-CT fusion was required. AVD software identified the culprit arterial branch in 18 of 20 (90 %) cases. In two cases, vessel tracking required manual marking of the candidate arterial bleeder. Technical success was 95 %. Successful embolization was achieved in all patients. Mean contrast volume injected for each patient was 77.5 ml, and mean overall procedural time was 50 min.ConclusionsC-arm CBCT and AVD software during TAE of angiographically challenging arterial bleedings is feasible and may facilitate successful embolization. Staff training in CBCT imaging and software manipulation is necessary.« less

Current status of waste management in Botswana: A mini-review.

PubMed

Mmereki, Daniel

2018-05-01

Effective waste management practices are not all about legislative solutions, but a combination of the environmental, social, technical, technically skilled human resources, financial and technological resources, resource recycling, environmental pollution awareness programmes and public participation. As a result of insufficient resources, municipal solid waste (MSW) in transition and developing countries like Botswana remains a challenge, and it is often not yet given highest priority. In Botswana, the environment, public health and other socio-economic aspects are threatened by waste management practices due to inadequate implementation and enforcement mechanisms of waste management policy. This mini-review paper describes the panorama of waste management practices in Botswana and provides information to competent authorities responsible for waste management and to researchers to develop and implement an effective waste management system. Waste management practices in Botswana are affected by: lack of effective implementation of national waste policy, fragmented tasks and overlapping mandates among relevant institutions; lack of clear guidelines on the responsibilities of the generators and public authorities and on the associated economic incentives; and lack of consistent and comprehensive solid waste management policies; lack of intent by decision-makers to prepare national waste management plans and systems, and design and implement an integrated sustainable municipal solid waste management system. Due to these challenges, there are concerns over the growing trend of the illegal dumping of waste, creating mini dumping sites all over the country, and such actions jeopardize the efforts of lobbying investors and tourism business. Recommendations for concerted efforts are made to support decision makers to re-organize a sustainable waste management system, and this paper provides a reference to other emerging economies in the region and the world.

Use of Evidence-Based Practices and Resources Among Comprehensive Cancer Control Programs

PubMed Central

Steele, C. Brooke; Rose, John M.; Chovnick, Gary; Townsend, Julie S.; Stockmyer, Chrisandra K.; Fonseka, Jamila; Richardson, Lisa C.

2015-01-01

Context While efforts to promote use of evidence-based practices (EBPs) for cancer control have increased, questions remain whether this will result in widespread adoption of EBPs (eg, Guide to Community Preventive Services interventions) by comprehensive cancer control (CCC) programs. Objective To examine use of EBPs among CCC programs to develop cancer control plans and select interventions. Design Conducted Web-based surveys of and telephone interviews with CCC program staff between March and July 2012. Setting CCC programs funded by the Centers for Disease Control and Prevention’s National Comprehensive Cancer Control Program (NCCCP). Participants Sixty-one CCC program directors. Main Outcome Measures 1) Use of and knowledge/attitudes about EBPs and related resources and 2) EBP-related technical assistance needs. Results Seventy-five percent of eligible program directors reported use of EBPs to a moderate or great extent to address program objectives. Benefits of using EBPS included their effectiveness has been proven, they are an efficient use of resources, and they lend credibility to an intervention. Challenges to using EBPs included resource limitations, lack of culturally appropriate interventions, and limited skills adapting EBPs for local use. Most respondents had heard of and used Web sites for The Guide to Community Preventive Services (95% and 91%, respectively) and Cancer Control P.L.A.N.E.T. (98% and 75%, respectively). Training needs included how to adapt an EBP and its materials for cultural appropriateness (state 78%, tribe 86%, territory 80%) and how to maintain the fidelity of an EBP (state 75%, tribe 86%, territory 60%). Conclusions While awareness, knowledge, and use of EBPs and related resources are high, respondents identified numerous challenges and training needs. The findings from this study may be used to enhance technical assistance provided to NCCCP grantees related to selecting and implementing EBPs. PMID:24402431

Women in computer science: An interpretative phenomenological analysis exploring common factors contributing to women's selection and persistence in computer science as an academic major

NASA Astrophysics Data System (ADS)

Thackeray, Lynn Roy

The purpose of this study is to understand the meaning that women make of the social and cultural factors that influence their reasons for entering and remaining in study of computer science. The twenty-first century presents many new challenges in career development and workforce choices for both men and women. Information technology has become the driving force behind many areas of the economy. As this trend continues, it has become essential that U.S. citizens need to pursue a career in technologies, including the computing sciences. Although computer science is a very lucrative profession, many Americans, especially women, are not choosing it as a profession. Recent studies have shown no significant differences in math, technical and science competency between men and women. Therefore, other factors, such as social, cultural, and environmental influences seem to affect women's decisions in choosing an area of study and career choices. A phenomenological method of qualitative research was used in this study, based on interviews of seven female students who are currently enrolled in a post-secondary computer science program. Their narratives provided meaning into the social and cultural environments that contribute to their persistence in their technical studies, as well as identifying barriers and challenges that are faced by female students who choose to study computer science. It is hoped that the data collected from this study may provide recommendations for the recruiting, retention and support for women in computer science departments of U.S. colleges and universities, and thereby increase the numbers of women computer scientists in industry. Keywords: gender access, self-efficacy, culture, stereotypes, computer education, diversity.

Importance of technical preparation of intraarterial shunts to prevent iatrogenic arterial injury during urgent procedures.

PubMed

Awad, Nadia; Choudry, Rashad; Durinka, Joel; Prabhu, Aparna; Dissin, Jonathan

2013-02-01

Although intraarterial shunting during carotid endarterectomy is a well-defined practice, its use remains controversial. Complication rates associated with shunt placement remain low, but may be underreported. When complications secondary to routine intraarterial shunting occur, they can cause significant morbidity or even mortality, emphasizing the importance of meticulous technique to prevent adverse outcomes. We report a case of internal carotid artery dissection and pseuedoaneurysm due to the technical failure of a safety device of an intraarterial shunt used during carotid endarterectomy.

Capability Gap Assessment - Blending Warfighter Experience with Science

DTIC Science & Technology

2013-02-15

This technical report describes the gap assessment method and the results of using it. 15. SUBJECT TERMS capability gap assessment, operational risk ...29 Challenges ...approach that blends warfighter experience with science. This paper describes the process, challenges , and opportunities associated with this technique

Printed batteries and conductive patterns in technical textiles

NASA Astrophysics Data System (ADS)

Willert, Andreas; Meuser, Carmen; Baumann, Reinhard R.

2018-05-01

Various applications of functional devices need a tailored and reliable supply of electrical energy. Batteries are electrochemical systems that deliver energy for functional devices and applications. Due to the common use, several rigid types of batteries have been standardized. To fully integrate the battery into a product that is bendable, free in geometry and less than 1 mm thick, printing of power adaptable batteries is a challenging area of research. Therefore, the well-known zinc-manganese system, which is very promising due to its environmental sustainability and its simplicity, has been used to manufacture battery solutions on a new kind of substrate: technical textiles. Another challenge is the deposition of conductive patterns. At present, embroidery with metallic yarn is the only possibility to provide conducting paths on technical textiles, a time-consuming and elaborate process. Screen printed conductive pathways will generate a new momentum in the manufacturing of conductivity on textiles.

The NASA "PERS" Program: Solid Polymer Electrolyte Development for Advanced Lithium-Based Batteries

NASA Technical Reports Server (NTRS)

Baldwin, Richard S.; Bennett, William R.

2007-01-01

In fiscal year 2000, The National Aeronautics and Space Administration (NASA) and the Air Force Research Laboratory (AFRL) established a collaborative effort to support the development of polymer-based, lithium-based cell chemistries and battery technologies to address the next generation of aerospace applications and mission needs. The ultimate objective of this development program, which was referred to as the Polymer Energy Rechargeable System (PERS), was to establish a world-class technology capability and U.S. leadership in polymer-based battery technology for aerospace applications. Programmatically, the PERS initiative exploited both interagency collaborations to address common technology and engineering issues and the active participation of academia and private industry. The initial program phases focused on R&D activities to address the critical technical issues and challenges at the cell level. Out of a total of 38 proposals received in response to a NASA Research Announcement (NRA) solicitation, 18 proposals (13 contracts and 5 grants) were selected for initial award to address these technical challenges. Brief summaries of technical approaches, results and accomplishments of the PERS Program development efforts are presented. With Agency support provided through FY 2004, the PERS Program efforts were concluded in 2005, as internal reorganizations and funding cuts resulted in shifting programmatic priorities within NASA. Technically, the PERS Program participants explored, to various degrees over the lifetime of the formal program, a variety of conceptual approaches for developing and demonstrating performance of a viable advanced solid polymer electrolyte possessing the desired attributes, as well as several participants addressing all components of an integrated cell configuration. Programmatically, the NASA PERS Program was very successful, even though the very challenging technical goals for achieving a viable solid polymer electrolyte material or the overall envisioned long-term, program objectives were not met due to funding reductions. The NASA PERS Program provided research opportunities and generated and disseminated a wealth of new scientific knowledge and technical competencies within the polymer electrolyte area.

Surrogate Joint Aerial Layer Network (JALN) Experiment: Applications of Commercial-Off-The-Shelf Technologies for Researching Future JALN Challenges

DTIC Science & Technology

2014-12-01

CHALLENGES DECEMBER 2014 TECHNICAL REPORT APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED STINFO COPY AIR FORCE RESEARCH LABORATORY INFORMATION...JOINT AERIAL LAYER NETWORK (JALN) EXPERIMENT: APPLICATION OF COMMERCIAL-OFF-THE-SHELF TECHNOLOGIES FOR RESEARCHING FUTURE JALN CHALLENGES 5a... challenge JALN developers. The use of low-cost COTS wireless technology is found to be a suitable surrogate for military hardware for investigating

User-documented food consumption data from publicly available apps: an analysis of opportunities and challenges for nutrition research.

PubMed

Maringer, Marcus; Van't Veer, Pieter; Klepacz, Naomi; Verain, Muriel C D; Normann, Anne; Ekman, Suzanne; Timotijevic, Lada; Raats, Monique M; Geelen, Anouk

2018-06-09

The need for a better understanding of food consumption behaviour within its behavioural context has sparked the interest of nutrition researchers for user-documented food consumption data collected outside the research context using publicly available nutrition apps. The study aims to characterize the scientific, technical, legal and ethical features of this data in order to identify the opportunities and challenges associated with using this data for nutrition research. A search for apps collecting food consumption data was conducted in October 2016 against UK Google Play and iTunes storefronts. 176 apps were selected based on user ratings and English language support. Publicly available information from the app stores and app-related websites was investigated and relevant data extracted and summarized. Our focus was on characteristics related to scientific relevance, data management and legal and ethical governance of user-documented food consumption data. Food diaries are the most common form of data collection, allowing for multiple inputs including generic food items, packaged products, or images. Standards and procedures for compiling food databases used for estimating energy and nutrient intakes remain largely undisclosed. Food consumption data is interlinked with various types of contextual data related to behavioural motivation, physical activity, health, and fitness. While exchange of data between apps is common practise, the majority of apps lack technical documentation regarding data export. There is a similar lack of documentation regarding the implemented terms of use and privacy policies. While users are usually the owners of their data, vendors are granted irrevocable and royalty free licenses to commercially exploit the data. Due to its magnitude, diversity, and interconnectedness, user-documented food consumption data offers promising opportunities for a better understanding of habitual food consumption behaviour and its determinants. Non-standardized or non-documented food data compilation procedures, data exchange protocols and formats, terms of use and privacy statements, however, limit possibilities to integrate, process and share user-documented food consumption data. An ongoing research effort is required, to keep pace with the technical advancements of food consumption apps, their evolving data networks and the legal and ethical regulations related to protecting app users and their personal data.

Launch Vehicle Design Process: Characterization, Technical Integration, and Lessons Learned

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.; Humphries, W. R.

2001-01-01

Engineering design is a challenging activity for any product. Since launch vehicles are highly complex and interconnected and have extreme energy densities, their design represents a challenge of the highest order. The purpose of this document is to delineate and clarify the design process associated with the launch vehicle for space flight transportation. The goal is to define and characterize a baseline for the space transportation design process. This baseline can be used as a basis for improving effectiveness and efficiency of the design process. The baseline characterization is achieved via compartmentalization and technical integration of subsystems, design functions, and discipline functions. First, a global design process overview is provided in order to show responsibility, interactions, and connectivity of overall aspects of the design process. Then design essentials are delineated in order to emphasize necessary features of the design process that are sometimes overlooked. Finally the design process characterization is presented. This is accomplished by considering project technical framework, technical integration, process description (technical integration model, subsystem tree, design/discipline planes, decision gates, and tasks), and the design sequence. Also included in the document are a snapshot relating to process improvements, illustrations of the process, a survey of recommendations from experienced practitioners in aerospace, lessons learned, references, and a bibliography.

The Role of a Physical Analysis Laboratory in a 300 mm IC Development and Manufacturing Centre

NASA Astrophysics Data System (ADS)

Kwakman, L. F. Tz.; Bicais-Lepinay, N.; Courtas, S.; Delille, D.; Juhel, M.; Trouiller, C.; Wyon, C.; de la Bardonnie, M.; Lorut, F.; Ross, R.

2005-09-01

To remain competitive IC manufacturers have to accelerate the development of most advanced (CMOS) technology and to deliver high yielding products with best cycle times and at a competitive pricing. With the increase of technology complexity, also the need for physical characterization support increases, however many of the existing techniques are no longer adequate to effectively support the 65-45 nm technology node developments. New and improved techniques are definitely needed to better characterize the often marginal processes, but these should not significantly impact fabrication costs or cycle time. Hence, characterization and metrology challenges in state-of-the-art IC manufacturing are both of technical and economical nature. TEM microscopy is needed for high quality, high volume analytical support but several physical and practical hurdles have to be taken. The success rate of FIB-SEM based failure analysis drops as defects often are too small to be detected and fault isolation becomes more difficult in the nano-scale device structures. To remain effective and efficient, SEM and OBIRCH techniques have to be improved or complemented with other more effective methods. Chemical analysis of novel materials and critical interfaces requires improvements in the field of e.g. SIMS, ToF-SIMS. Techniques that previously were only used sporadically, like EBSD and XRD, have become a `must' to properly support backend process development. At the bright side, thanks to major technical advances, techniques that previously were practiced at laboratory level only now can be used effectively for at-line fab metrology: Voltage Contrast based defectivity control, XPS based gate dielectric metrology and XRD based control of copper metallization processes are practical examples. In this paper capabilities and shortcomings of several techniques and corresponding equipment are presented with practical illustrations of use in our Crolles facilities.

The Virtual Observatory: Retrospective and Prospectus

NASA Astrophysics Data System (ADS)

Hanisch, R. J.

2010-12-01

At the ADASS XV in San Lorenzo de El Escorial, Spain, in October 2005, I gave an overview of the accomplishments of the Virtual Observatory initiatives and discussed the imminent transition from development to operations. That transition remains on the horizon for the US Virtual Observatory, and VO projects worldwide have encountered various programmatic challenges. The successes of the Virtual Observatory are many, but thus far are primarily of a technical nature. We have developed a data discovery and data access infrastructure that has been taken up by data centers and observatories around the world. We have web-based interfaces, downloadable toolkits and applications, a security and restricted access capability, standard vocabularies, a sophisticated messaging and alert system for transient events, and the ability for applications to exchange messages and work together seamlessly. This has been accomplished through a strong collaboration between astronomers and information technology specialists. We have been less successful engaging the astronomical researcher. Relatively few papers have been published based on VO-enabled research, and many astronomers remain unfamiliar with the capabilities of the VO despite active training and tutorial programs hosted by several of the major VO projects. As we (finally!) enter the operational phase of the VO, we need to focus on areas that have contributed to the limited take-up of the VO amongst active scientists, such as ease of use, reliability, and consistency. We need to routinely test VO services for aliveness and adherence to standards, working with data providers to fix errors and otherwise removing non-compliant services from those seen by end-users. Technical developments will need to be motivated and prioritized based on scientific utility. We need to continue to embrace new technology and employ it in a context that focuses on research productivity.

How, When, and Where? Assessing Renewable Energy Self-Sufficiency at the Neighborhood Level.

PubMed

Grosspietsch, David; Thömmes, Philippe; Girod, Bastien; Hoffmann, Volker H

2018-02-20

Self-sufficient decentralized systems challenge the centralized energy paradigm. Although scholars have assessed specific locations and technological aspects, it remains unclear how, when, and where energy self-sufficiency could become competitive. To address this gap, we develop a techno-economic model for energy self-sufficient neighborhoods that integrates solar photovoltaics (PV), conversion, and storage technologies. We assess the cost of 100% self-sufficiency for both electricity and heat, comparing different technical configurations for a stylized neighborhood in Switzerland and juxtaposing these findings with projections on market and technology development. We then broaden the scope and vary the neighborhood's composition (residential share) and geographic position (along different latitudes). Regarding how to design self-sufficient neighborhoods, we find two promising technical configurations. The "PV-battery-hydrogen" configuration is projected to outperform a fossil-fueled and grid-connected reference configuration when energy prices increase by 2.5% annually and cost reductions in hydrogen-related technologies by a factor of 2 are achieved. The "PV-battery" configuration would allow achieving parity with the reference configuration sooner, at 21% cost reduction. Additionally, more cost-efficient deployment is found in neighborhoods where the end-use is small commercial or mixed and in regions where seasonal fluctuations are low and thus allow for reducing storage requirements.

Information Technology Measurement and Testing Activities at NIST

PubMed Central

Hogan, Michael D.; Carnahan, Lisa J.; Carpenter, Robert J.; Flater, David W.; Fowler, James E.; Frechette, Simon P.; Gray, Martha M.; Johnson, L. Arnold; McCabe, R. Michael; Montgomery, Douglas; Radack, Shirley M.; Rosenthal, Robert; Shakarji, Craig M.

2001-01-01

Our high technology society continues to rely more and more upon sophisticated measurements, technical standards, and associated testing activities. This was true for the industrial society of the 20th century and remains true for the information society of the 21st century. Over the last half of the 20th century, information technology (IT) has been a powerful agent of change in almost every sector of the economy. The complexity and rapidly changing nature of IT have presented unique technical challenges to the National Institute of Standards and Technology (NIST) and to the scientific measurement community in developing a sound measurement and testing infrastructure for IT. This measurement and testing infrastructure for the important non-physical and non-chemical properties associated with complex IT systems is still in an early stage of development. This paper explains key terms and concepts of IT metrology, briefly reviews the history of the National Bureau of Standards/National Institute of Standards and Technology (NBS/NIST) in the field of IT, and reviews NIST’s current capabilities and work in measurement and testing for IT. It concludes with a look at what is likely to occur in the field of IT over the next ten years and what metrology roles NIST is likely to play. PMID:27500026

Using the crowd as an innovation partner.

PubMed

Boudreau, Kevin J; Lakhani, Karim R

2013-04-01

From Apple to Merck to Wikipedia, more and more organizations are turning to crowds for help in solving their most vexing innovation and research questions, but managers remain understandably cautious. It seems risky and even unnatural to push problems out to vast groups of strangers distributed around the world, particularly for companies built on a history of internal innovation. How can intellectual property be protected? How can a crowd-sourced solution be integrated into corporate operations? What about the costs? These concerns are all reasonable, the authors write, but excluding crowdsourcing from the corporate innovation tool kit means losing an opportunity. After a decade of study, they have identified when crowds tend to outperform internal organizations (or not). They outline four ways to tap into crowd-powered problem solving--contests, collaborative communities, complementors, and labor markets--and offer a system for picking the best one in a given situation. Contests, for example, are suited to highly challenging technical, analytical, and scientific problems; design problems; and creative or aesthetic projects. They are akin to running a series of independent experiments that generate multiple solutions--and if those solutions cluster at some extreme, a company can gain insight into where a problem's "technical frontier" lies. (Internal R&D may generate far less information.)

Opportunities and Barriers to Resource Recovery and Recycling from Shredder Residue in the United States

NASA Astrophysics Data System (ADS)

Nayak, Naren; Apelian, Diran

2014-11-01

Shredder residue is the by-product remaining after ferrous and nonferrous metals have been recovered from the processing of vehicles, white goods, and peddler scrap. Shredder residue consists of glass, plastics, rubber, dirt, and small amounts of metal. It is estimated that 5-7 million tons of this shredder residue are landfilled each year in the United States. Technical advancements, coupled with European Union directives and the economic climate, have transformed the recycling of shredder residue in Europe. In the United States, however, regulatory controls and the cheap cost of landfill have worked against the advancement of recycling and recovery of this resource. The Argonne National Laboratory, which is funded by the U.S. Department of Energy, has investigated the effectiveness of recycling shredder residue into polymers. Other research has examined the use of shredder residue in waste-to-energy applications. To improve our ability to process and recycle shredder residue, an investigation of the regulatory, economic, and technological challenges was undertaken. The objective was to conduct a comprehensive review of work done to date, to document the composition of typical shredder output and to identify potential recoverable items (residual metals, plastics, rubber, foam, etc.). Along with uncovering potential new markets, the research would identify the technical, regulatory, and economic barriers to developing those markets.

The evolving application of single-port robotic surgery in general surgery.

PubMed

Qadan, Motaz; Curet, Myriam J; Wren, Sherry M

2014-01-01

Advances in the field of minimally invasive surgery have grown since the original advent of conventional multiport laparoscopic surgery. The recent development of single incision laparoscopic surgery remains a relatively novel technique, and has had mixed reviews as to whether it has been associated with lower pain scores, shorter hospital stays, and higher satisfaction levels among patients undergoing procedures through cosmetically-appeasing single incisions. However, due to technical difficulties that arise from the clustering of laparoscopic instruments through a confined working space, such as loss of instrument triangulation, poor surgical exposure, and instrument clashing, uptake by surgeons without a specific interest and expertise in cutting-edge minimally invasive approaches has been limited. The parallel use of robotic surgery with single-port platforms, however, appears to counteract technical issues associated with single incision laparoscopic surgery through significant ergonomic improvements, including enhanced instrument triangulation, organ retraction, and camera localization within the surgical field. By combining the use of the robot with the single incision platform, the recognized challenges of single incision laparoscopic surgery are simplified, while maintaining potential advantages of the single-incision minimally invasive approach. This review provides a comprehensive report of the evolving application single-port robotic surgery in the field of general surgery today. © 2013 Japanese Society of Hepato-Biliary-Pancreatic Surgery.

TaxaGloss - A Glossary and Translation Tool for Biodiversity Studies.

PubMed

Collin, Rachel; Fredericq, Suzanne; Freshwater, D Wilson; Gilbert, Edward; Madrid, Maycol; Maslakova, Svetlana; Miglietta, Maria Pia; Rocha, Rosana M; Rodríguez, Estefanía; Thacker, Robert W

2016-01-01

Correctly identifying organisms is key to most biological research, and is especially critical in areas of biodiversity and conservation. Yet it remains one of the greatest challenges when studying all but the few well-established model systems. The challenge is in part due to the fact that most species have yet to be described, vanishing taxonomic expertise and the relative inaccessibility of taxonomic information. Furthermore, identification keys and other taxonomic resources are based on complex, taxon-specific vocabularies used to describe important morphological characters. Using these resources is made difficult by the fact that taxonomic documentation of the world's biodiversity is an international endeavour, and keys and field guides are not always available in the practitioner's native language. To address this challenge, we have developed a publicly available on-line illustrated multilingual glossary and translation tool for technical taxonomic terms using the Symbiota Software Project biodiversity platform. Illustrations, photographs and translations have been sourced from the global community of taxonomists working with marine invertebrates and seaweeds. These can be used as single-language illustrated glossaries or to make customized translation tables. The glossary has been launched with terms and illustrations of seaweeds, tunicates, sponges, hydrozoans, sea anemones, and nemerteans, and already includes translations into seven languages for some groups. Additional translations and development of terms for more taxa are underway, but the ultimate utility of this tool depends on active participation of the international taxonomic community.

Assessing potential propulsion breakthroughs.

PubMed

Millis, Marc G

2005-12-01

The term, propulsion breakthrough, refers to concepts like propellantless space drives and faster-than-light travel, the kind of breakthroughs that would make interstellar exploration practical. Although no such breakthroughs appear imminent, a variety of investigations have begun. During 1996-2002 NASA supported the breakthrough propulsion physics project to examine physics in the context of breakthrough spaceflight. Three facets of these assessments are now reported: (1) predicting benefits, (2) selecting research, and (3) recent technical progress. Predicting benefits is challenging, since the breakthroughs are still only notional concepts, but energy can serve as a basis for comparison. A hypothetical space drive would require many orders of magnitude less energy than a rocket for journeys to our nearest neighboring star. Assessing research options is challenging when the goals are beyond known physics and when the implications of success are profound. To mitigate the challenges, a selection process is described where: (1) research tasks are constrained to only address the immediate unknowns, curious effects, or critical issues; (2) reliability of assertions is more important than their implications; and (3) reviewers judge credibility rather than feasibility. The recent findings of a number of tasks, some selected using this process, are discussed. Of the 14 tasks included, six reached null conclusions, four remain unresolved, and four have opportunities for sequels. A dominant theme with the sequels is research about the properties of space, inertial frames, and the quantum vacuum.

Direct Adaptive Control of Systems with Actuator Failures: State of the Art and Continuing Challenges

NASA Technical Reports Server (NTRS)

Tao, Gang; Joshi, Suresh M.

2008-01-01

In this paper, the problem of controlling systems with failures and faults is introduced, and an overview of recent work on direct adaptive control for compensation of uncertain actuator failures is presented. Actuator failures may be characterized by some unknown system inputs being stuck at some unknown (fixed or varying) values at unknown time instants, that cannot be influenced by the control signals. The key task of adaptive compensation is to design the control signals in such a manner that the remaining actuators can automatically and seamlessly take over for the failed ones, and achieve desired stability and asymptotic tracking. A certain degree of redundancy is necessary to accomplish failure compensation. The objective of adaptive control design is to effectively use the available actuation redundancy to handle failures without the knowledge of the failure patterns, parameters, and time of occurrence. This is a challenging problem because failures introduce large uncertainties in the dynamic structure of the system, in addition to parametric uncertainties and unknown disturbances. The paper addresses some theoretical issues in adaptive actuator failure compensation: actuator failure modeling, redundant actuation requirements, plant-model matching, error system dynamics, adaptation laws, and stability, tracking, and performance analysis. Adaptive control designs can be shown to effectively handle uncertain actuator failures without explicit failure detection. Some open technical challenges and research problems in this important research area are discussed.

Operando chemistry of catalyst surfaces during catalysis.

PubMed

Dou, Jian; Sun, Zaicheng; Opalade, Adedamola A; Wang, Nan; Fu, Wensheng; Tao, Franklin Feng

2017-04-03

Chemistry of a catalyst surface during catalysis is crucial for a fundamental understanding of mechanism of a catalytic reaction performed on the catalyst in the gas or liquid phase. Due to the pressure- or molecular density-dependent entropy contribution of gas or liquid phase of the reactants and the potential formation of a catalyst surface during catalysis different from that observed in an ex situ condition, the characterization of the surface of a catalyst under reaction conditions and during catalysis can be significant and even necessary for understanding the catalytic mechanism at a molecular level. Electron-based analytical techniques are challenging for studying catalyst nanoparticles in the gas or liquid phase although they are necessary techniques to employ. Instrumentation and further development of these electron-based techniques have now made in situ/operando studies of catalysts possible. New insights into the chemistry and structure of catalyst nanoparticles have been uncovered over the last decades. Herein, the origin of the differences between ex situ and in situ/operando studies of catalysts, and the technical challenges faced as well as the corresponding instrumentation and innovations utilized for characterizing catalysts under reaction conditions and during catalysis, are discussed. The restructuring of catalyst surfaces driven by the pressure of reactant(s) around a catalyst, restructuring in reactant(s) driven by reaction temperature and restructuring during catalysis are also reviewed herein. The remaining challenges and possible solutions are briefly discussed.

Reintervention for stent occlusion after bilateral self-expandable metallic stent placement for malignant hilar biliary obstruction.

PubMed

Inoue, Tadahisa; Naitoh, Itaru; Okumura, Fumihiro; Ozeki, Takanori; Anbe, Kaiki; Iwasaki, Hiroyasu; Nishie, Hirotada; Mizushima, Takashi; Sano, Hitoshi; Nakazawa, Takahiro; Yoneda, Masashi; Joh, Takashi

2016-11-01

Endoscopic reintervention for stent occlusions following bilateral self-expandable metallic stent (SEMS) placement for malignant hilar biliary obstruction (MHBO) is challenging, and time to recurrent biliary obstruction (RBO) of the revisionary stent remains unclear. We aimed to clarify a suitable reintervention method for stent occlusions following bilateral SEMS placement for MHBO. Between 2002 and 2014, 52 consecutive patients with MHBO who underwent endoscopic reintervention for stent occlusion after bilateral SEMS placement were enrolled at two university hospitals and one tertiary care referral center. We retrospectively evaluated the technical and functional success rates of the reinterventions, and the time to RBO of the revisionary stents. Technical and functional success rates of the reinterventions were 92% (48/52) and 90% (43/48), respectively. Univariate analysis did not determine any significant predictive factors for technical and functional failures. Median time to RBO of the revisionary stents was 68 days. Median time to RBO was significantly longer for revisionary SEMS placement than for plastic stent placement (131 days vs 47 days, respectively; log-rank test, P = 0.005). Revisionary SEMS placement was the only independent factor that was significantly associated with a longer time to RBO of the revisionary stent in the multivariate Cox proportional hazards analysis (hazard ratio 0.37; 95% confidence interval 0.14-0.95; P = 0.039). Revisionary SEMS placement is a suitable endoscopic reintervention method for stent occlusion following bilateral SEMS placement from the perspective of time to RBO of the revisionary stent. © 2016 Japan Gastroenterological Endoscopy Society.

Thyroid nodule ultrasound: technical advances and future horizons.

PubMed

McQueen, Andrew S; Bhatia, Kunwar S S

2015-04-01

Thyroid nodules are extremely common and the vast majority are non-malignant; therefore the accurate discrimination of a benign lesion from malignancy is challenging. Ultrasound (US) characterisation has become the key component of many thyroid nodule guidelines and is primarily based on the detection of key features by high-resolution US. The thyroid imager should be familiar with the strengths and limitations of this modality and understand the technical factors that create and alter the imaging characteristics. Specific advances in high-resolution US are discussed with reference to individual features of thyroid cancer and benign disease. Potential roles for three-dimensional thyroid ultrasound and computer-aided diagnosis are also considered. The second section provides an overview of current evidence regarding thyroid ultrasound elastography (USE). USE is a novel imaging technique that quantifies tissue elasticity (stiffness) non-invasively and has potential utility because cancers cause tissue stiffening. In recent years, there has been much research into the value of thyroid USE for distinguishing benign and malignant nodules. Preliminary findings from multiple pilot studies and meta-analyses are promising and suggest that USE can augment the anatomical detail provided by high-resolution US. However, a definite role remains controversial and is discussed. • High-resolution US characterises thyroid nodules by demonstration of specific anatomical features • Technical advances heavily influence the key US features of thyroid nodules • Most papillary carcinomas appear stiffer than benign thyroid nodules on US elastography (USE) • Thyroid USE is controversial because of variation in the reported accuracies for malignancy • Combined grey-scale US/USE may lower the FNAC rate in benign nodules.

Challenges for PISA

ERIC Educational Resources Information Center

Schleicher, Andreas

2016-01-01

The OECD Programme for International Student Assessment (PISA) provides a framework in which over 80 countries collaborate to build advanced global metrics to assess the knowledge, skills and character attributes of the students. The design of assessments poses major conceptual and technical challenges, as successful learning. Beyond a sound…

Monitored natural attenuation of chlorinated solvents—Moving beyond reductive dechlorination

USGS Publications Warehouse

Vangelas, Karen M.; Looney, Brian B.; Early, Tom O.; Gilmore, Tyler; Chapelle, Francis H.; Adams, Karen M.; Sink, Claire H.

2006-01-01

Monitored natural attenuation (MNA), while a remedy of choice for many sites, can be challenging when the contaminants are chlorinated solvents. Even with many high-quality technical guidance references available, there continue to be challenges implementing MNA at some chlorinated solvent sites. The U.S. Department of Energy, as one organization facing such challenges, is leading a project that will incorporate developing concepts and tools into the existing toolbox for selecting and implementing MNA as a remediation option at sites with chlorinated solvent contamination. The structure and goals of this project were introduced in an article in the Winter 2004 issue of Remediation (Sink et al., 2004). This article is a summary of the three technical areas being developed through the project: mass balance, enhanced attenuation, and characterization and monitoring supporting the first two areas.

Technical challenges for big data in biomedicine and health: data sources, infrastructure, and analytics.

PubMed

Peek, N; Holmes, J H; Sun, J

2014-08-15

To review technical and methodological challenges for big data research in biomedicine and health. We discuss sources of big datasets, survey infrastructures for big data storage and big data processing, and describe the main challenges that arise when analyzing big data. The life and biomedical sciences are massively contributing to the big data revolution through secondary use of data that were collected during routine care and through new data sources such as social media. Efficient processing of big datasets is typically achieved by distributing computation over a cluster of computers. Data analysts should be aware of pitfalls related to big data such as bias in routine care data and the risk of false-positive findings in high-dimensional datasets. The major challenge for the near future is to transform analytical methods that are used in the biomedical and health domain, to fit the distributed storage and processing model that is required to handle big data, while ensuring confidentiality of the data being analyzed.

Novel technical solutions for wireless ECG transmission & analysis in the age of the internet cloud.

PubMed

Al-Zaiti, Salah S; Shusterman, Vladimir; Carey, Mary G

2013-01-01

Current guidelines recommend early reperfusion therapy for ST-elevation myocardial infarction (STEMI) within 90 min of first medical encounter. Telecardiology entails the use of advanced communication technologies to transmit the prehospital 12-lead electrocardiogram (ECG) to offsite cardiologists for early triage to the cath lab; which has been shown to dramatically reduce door-to-balloon time and total mortality. However, hospitals often find adopting ECG transmission technologies very challenging. The current review identifies seven major technical challenges of prehospital ECG transmission, including: paramedics inconvenience and transport delay; signal noise and interpretation errors; equipment malfunction and transmission failure; reliability of mobile phone networks; lack of compliance with the standards of digital ECG formats; poor integration with electronic medical records; and costly hardware and software pre-requisite installation. Current and potential solutions to address each of these technical challenges are discussed in details and include: automated ECG transmission protocols; annotatable waveform-based ECGs; optimal routing solutions; and the use of cloud computing systems rather than vendor-specific processing stations. Nevertheless, strategies to monitor transmission effectiveness and patient outcomes are essential to sustain initial gains of implementing ECG transmission technologies. © 2013.

The Global Outbreak Alert and Response Network

PubMed Central

Mackenzie, John S.; Drury, Patrick; Arthur, Ray R.; Ryan, Michael J.; Grein, Thomas; Slattery, Raphael; Suri, Sameera; Domingo, Christine Tiffany; Bejtullahu, Armand

2014-01-01

The Global Outbreak Alert and Response Network (GOARN) was established in 2000 as a network of technical institutions, research institutes, universities, international health organisations and technical networks willing to contribute and participate in internationally coordinated responses to infectious disease outbreaks. It reflected a recognition of the need to strengthen and coordinate rapid mobilisation of experts in responding to international outbreaks and to overcome the sometimes chaotic and fragmented operations characterising previous responses. The network partners agreed that the World Health Organization would coordinate the network and provide a secretariat, which would also function as the operational support team. The network has evolved to comprise 153 institutions/technical partners and 37 additional networks, the latter encompassing a further 355 members and has been directly involved in 137 missions to 79 countries, territories or areas. Future challenges will include supporting countries to achieve the capacity to detect and respond to outbreaks of international concern, as required by the International Health Regulations (2005). GOARN's increasing regional focus and expanding geographic composition will be central to meeting these challenges. The paper summarises some of network's achievements over the past 13 years and presents some of the future challenges. PMID:25186571

The global outbreak alert and response network.

PubMed

Mackenzie, John S; Drury, Patrick; Arthur, Ray R; Ryan, Michael J; Grein, Thomas; Slattery, Raphael; Suri, Sameera; Domingo, Christine Tiffany; Bejtullahu, Armand

2014-01-01

The Global Outbreak Alert and Response Network (GOARN) was established in 2000 as a network of technical institutions, research institutes, universities, international health organisations and technical networks willing to contribute and participate in internationally coordinated responses to infectious disease outbreaks. It reflected a recognition of the need to strengthen and coordinate rapid mobilisation of experts in responding to international outbreaks and to overcome the sometimes chaotic and fragmented operations characterising previous responses. The network partners agreed that the World Health Organization would coordinate the network and provide a secretariat, which would also function as the operational support team. The network has evolved to comprise 153 institutions/technical partners and 37 additional networks, the latter encompassing a further 355 members and has been directly involved in 137 missions to 79 countries, territories or areas. Future challenges will include supporting countries to achieve the capacity to detect and respond to outbreaks of international concern, as required by the International Health Regulations (2005). GOARN's increasing regional focus and expanding geographic composition will be central to meeting these challenges. The paper summarises some of network's achievements over the past 13 years and presents some of the future challenges.

Launch Vehicle Selection and the Implementation of the Soil Moisture Active Passive Mission

NASA Technical Reports Server (NTRS)

Sherman, Sarah; Waydo, Peter; Eremenko, Alexander

2016-01-01

Soil Moisture Active Passive (SMAP) is a NASA-developed Earth science satellite currently mapping the soil moisture content and freeze/thaw state of Earth's land mass from a 685km, near-polar, sun-synchronous orbit. It was launched on January 31, 2015 from Vandenberg AFB upon a Delta II 7320 launch vehicle. Due to external considerations, SMAP's launch vehicle selection remained an open item until Project Critical Design Review (CDR). Thus, certain key aspects of the spacecraft design had to accommodate a diverse range of candidate launch vehicle environments, performance envelopes, interfaces and operational scenarios. Engineering challenges stemmed from two distinct scenarios: decisions that had to be made prior to launch vehicle selection to accommodate all possible outcomes, and post-selection changes constrained by schedule and the existing spacecraft configuration. The effects of the timing of launch vehicle selection reached virtually every aspect of the Observatory's design and development. Physical environments, mass allocations, material selections, propulsion system performance, dynamic response, launch phase and mission planning, overall size and configuration, and of course all interfaces to the launch vehicle were heavily dependent on this outcome. This paper will discuss the resolution of these technical challenges.

Environmental and economic solutions: Pollution prevention technical assistance and the City of Los Angeles Hazardous and Toxic Materials Office

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toy-Chen, D.; Joyce, M.M.

1994-12-31

The City of Los Angeles faces a challenge to assist industrial facilities to minimize and manage hazardous materials in order to sustain the local economy and natural environment. Industrial facilities in Los Angeles County released into the environment or transferred off-site 103,442,074 tons of hazardous materials and waste in 1988. This enormous quantity of hazardous waste requires generators to be in compliance with several environmental regulatory agencies. The City of Los Angeles Hazardous and Toxic Materials (HTM) Office has increased the awareness, commitments, and implementation of hazardous waste at the source, the amount of toxic pollutants discharged into the City`smore » publicly owned treatment works, surface and groundwaters, soils and atmosphere can be substantially reduced. Quantifying hazardous waste minimization progress is extremely difficult and complex. However, the HTM Office anticipates that if the challenge of pollution prevention is successful, more businesses will decide to remain in the region and Los Angeles residents will feel convinced that industry is making good faith efforts to protect the environment. Pollution prevention is a long term solution for the hazardous waste crisis that society has only recently recognized.« less

Progress making the top end optical assembly (TEOA) for the 4-meter Advanced Technology Solar Telescope

NASA Astrophysics Data System (ADS)

Canzian, Blaise; Barentine, J.; Arendt, J.; Bader, S.; Danyo, G.; Heller, C.

2012-09-01

L-3 Integrated Optical Systems (IOS) Division has been selected by the National Solar Observatory (NSO) to design and produce the Top End Optical Assembly (TEOA) for the 4-meter Advanced Technology Solar Telescope (ATST) to operate at Haleakal', Maui. ATST will perform to a very high optical performance level in a difficult thermal environment. The TEOA, containing the 0.65-meter silicon carbide secondary mirror and support, mirror thermal management system, mirror positioning and fast tip-tilt system, field stop with thermally managed heat dump, thermally managed Lyot stop, safety interlock and control system, and support frame, operates in the "hot spot" at the prime focus of the ATST and so presents special challenges. In this paper, we describe progress in the L-3 technical approach to meeting these challenges, including silicon carbide off-axis mirror design, fabrication, and high accuracy figuring and polishing all within L-3; mirror support design; the design for stray light control; subsystems for opto-mechanical positioning and high accuracy absolute mirror orientation sensing; Lyot stop design; and thermal management of all design elements to remain close to ambient temperature despite the imposed solar irradiance load.

Randomization Does Not Help Much, Comparability Does

PubMed Central

Saint-Mont, Uwe

2015-01-01

According to R.A. Fisher, randomization “relieves the experimenter from the anxiety of considering innumerable causes by which the data may be disturbed.” Since, in particular, it is said to control for known and unknown nuisance factors that may considerably challenge the validity of a result, it has become very popular. This contribution challenges the received view. First, looking for quantitative support, we study a number of straightforward, mathematically simple models. They all demonstrate that the optimism surrounding randomization is questionable: In small to medium-sized samples, random allocation of units to treatments typically yields a considerable imbalance between the groups, i.e., confounding due to randomization is the rule rather than the exception. In the second part of this contribution, the reasoning is extended to a number of traditional arguments in favour of randomization. This discussion is rather non-technical, and sometimes touches on the rather fundamental Frequentist/Bayesian debate. However, the result of this analysis turns out to be quite similar: While the contribution of randomization remains doubtful, comparability contributes much to a compelling conclusion. Summing up, classical experimentation based on sound background theory and the systematic construction of exchangeable groups seems to be advisable. PMID:26193621

Multigeneration data migration from legacy systems

NASA Astrophysics Data System (ADS)

Ratib, Osman M.; Liu, Brent J.; Kho, Hwa T.; Tao, Wenchao; Wang, Cun; McCoy, J. Michael

2003-05-01

The migration of image data from different generations of legacy archive systems represents a technical challenge and in incremental cost in transitions to newer generations of PACS. UCLA medical center has elected to completely replace the existing PACS infrastructure encompassing several generations of legacy systems by a new commercial system providing enterprise-wide image management and communication. One of the most challenging parts of the project was the migration of large volumes of legacy images into the new system. Planning of the migration required the development of specialized software and hardware, and included different phases of data mediation from existing databases to the new PACS database prior to the migration of the image data. The project plan included a detailed analysis of resources and cost of data migration to optimize the process and minimize the delay of a hybrid operation where the legacy systems need to remain operational. Our analysis and project planning showed that the data migration represents the most critical path in the process of PACS renewal. Careful planning and optimization of the project timeline and resources allocated is critical to minimize the financial impact and the time delays that such migrations can impose on the implementation plan.

Are three generations of quantitative molecular methods sufficient in medical virology? Brief review.

PubMed

Clementi, Massimo; Bagnarelli, Patrizia

2015-10-01

In the last two decades, development of quantitative molecular methods has characterized the evolution of clinical virology more than any other methodological advancement. Using these methods, a great deal of studies has addressed efficiently in vivo the role of viral load, viral replication activity, and viral transcriptional profiles as correlates of disease outcome and progression, and has highlighted the physio-pathology of important virus diseases of humans. Furthermore, these studies have contributed to a better understanding of virus-host interactions and have sharply revolutionized the research strategies in basic and medical virology. In addition and importantly from a medical point of view, quantitative methods have provided a rationale for the therapeutic intervention and therapy monitoring in medically important viral diseases. Despite the advances in technology and the development of three generations of molecular methods within the last two decades (competitive PCR, real-time PCR, and digital PCR), great challenges still remain for viral testing related not only to standardization, accuracy, and precision, but also to selection of the best molecular targets for clinical use and to the identification of thresholds for risk stratification and therapeutic decisions. Future research directions, novel methods and technical improvements could be important to address these challenges.

Synthesis of 2D Metal Chalcogenide Thin Films through the Process Involving Solution-Phase Deposition.

PubMed

Giri, Anupam; Park, Gyeongbae; Yang, Heeseung; Pal, Monalisa; Kwak, Junghyeok; Jeong, Unyong

2018-04-24

2D metal chalcogenide thin films have recently attracted considerable attention owing to their unique physicochemical properties and great potential in a variety of applications. Synthesis of large-area 2D metal chalcogenide thin films in controllable ways remains a key challenge in this research field. Recently, the solution-based synthesis of 2D metal chalcogenide thin films has emerged as an alternative approach to vacuum-based synthesis because it is relatively simple and easy to scale up for high-throughput production. In addition, solution-based thin films open new opportunities that cannot be achieved from vacuum-based thin films. Here, a comprehensive summary regarding the basic structures and properties of different types of 2D metal chalcogenides, the mechanistic details of the chemical reactions in the synthesis of the metal chalcogenide thin films, recent successes in the synthesis by different reaction approaches, and the applications and potential uses is provided. In the last perspective section, the technical challenges to be overcome and the future research directions in the solution-based synthesis of 2D metal chalcogenides are discussed. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Adaptive trials for tuberculosis: early reflections on theory and practice.

PubMed

Montgomery, C M

2016-08-01

Adaptive designs (ADs) have been proposed for anti-tuberculosis treatment trials. This call for innovation occurs against the backdrop of fundamental changes in the acceptable evidence base in anti-tuberculosis treatment. To contextualise ADs for tuberculosis (TB) and explore early responses from those working in the field. In this qualitative study investigating processes of theoretical and practical change in randomised controlled trials, 24 interviews were conducted with professionals involved in AD trials, half of whom worked in the TB field. Clinical trialists working on AD trials in TB are positive about the efficiency these designs offer, but remain cautious about their suitability. In addition to technical concerns, informants discussed the challenges of implementing AD in developing countries, including limited regulatory capacity to evaluate proposals, investments needed in infrastructure and site capacity, and challenges regarding informed consent. Respondents identified funding, interdisciplinary communication and regulatory and policy responses as additional concerns potentially affecting the success of AD for TB. Empirical research is needed into patient experiences of AD, including informed consent. Further consideration of the contexts of innovation in trial design is needed. These are fundamental to the successful translation of theory into practice.

Obtaining providers' 'buy-in' and establishing effective means of information exchange will be critical to HITECH's success.

PubMed

Gold, Marsha R; McLaughlin, Catherine G; Devers, Kelly J; Berenson, Robert A; Bovbjerg, Randall R

2012-03-01

In enacting the Health Information Technology for Economic and Clinical Health (HITECH) provisions of the American Recovery and Reinvestment Act, Congress set ambitious goals for the nation to integrate information technology into health care delivery. The provisions called for the electronic exchange of health information and the adoption and meaningful use of health information technology in health care practices and hospitals. We examined the marketplace and regulatory forces that influence HITECH's success and identify outstanding challenges, some beyond the provisions' control. To reach HITECH's goals, providers and patients must be persuaded of the value of health information exchange and support its implementation. Privacy concerns and remaining technical challenges must also be overcome. Achieving HITECH's goals will require well-aligned incentives, both visionary and practical pursuit of exchange infrastructure, and realistic assumptions about how quickly such wholesale change can be accomplished. The use of metrics to show adoption proceeding at a reasonable pace, increased flow of data across parties, and evidence that care is improving, at least in areas with robust systems, will be essential to persuade stakeholders that the initiative is progressing well and warrants continued investment.

3D Bioprinting for Engineering Complex Tissues

PubMed Central

Mandrycky, Christian; Wang, Zongjie; Kim, Keekyoung; Kim, Deok-Ho

2016-01-01

Bioprinting is a 3D fabrication technology used to precisely dispense cell-laden biomaterials for the construction of complex 3D functional living tissues or artificial organs. While still in its early stages, bioprinting strategies have demonstrated their potential use in regenerative medicine to generate a variety of transplantable tissues, including skin, cartilage, and bone. However, current bioprinting approaches still have technical challenges in terms of high-resolution cell deposition, controlled cell distributions, vascularization, and innervation within complex 3D tissues. While no one-size-fits-all approach to bioprinting has emerged, it remains an on-demand, versatile fabrication technique that may address the growing organ shortage as well as provide a high-throughput method for cell patterning at the micrometer scale for broad biomedical engineering applications. In this review, we introduce the basic principles, materials, integration strategies and applications of bioprinting. We also discuss the recent developments, current challenges and future prospects of 3D bioprinting for engineering complex tissues. Combined with recent advances in human pluripotent stem cell technologies, 3D-bioprinted tissue models could serve as an enabling platform for high-throughput predictive drug screening and more effective regenerative therapies. PMID:26724184

3D bioprinting for engineering complex tissues.

PubMed

Mandrycky, Christian; Wang, Zongjie; Kim, Keekyoung; Kim, Deok-Ho

2016-01-01

Bioprinting is a 3D fabrication technology used to precisely dispense cell-laden biomaterials for the construction of complex 3D functional living tissues or artificial organs. While still in its early stages, bioprinting strategies have demonstrated their potential use in regenerative medicine to generate a variety of transplantable tissues, including skin, cartilage, and bone. However, current bioprinting approaches still have technical challenges in terms of high-resolution cell deposition, controlled cell distributions, vascularization, and innervation within complex 3D tissues. While no one-size-fits-all approach to bioprinting has emerged, it remains an on-demand, versatile fabrication technique that may address the growing organ shortage as well as provide a high-throughput method for cell patterning at the micrometer scale for broad biomedical engineering applications. In this review, we introduce the basic principles, materials, integration strategies and applications of bioprinting. We also discuss the recent developments, current challenges and future prospects of 3D bioprinting for engineering complex tissues. Combined with recent advances in human pluripotent stem cell technologies, 3D-bioprinted tissue models could serve as an enabling platform for high-throughput predictive drug screening and more effective regenerative therapies. Copyright © 2015 Elsevier Inc. All rights reserved.

Smart fabrics and interactive textile enabling wearable personal applications: R&D state of the art and future challenges.

PubMed

Lymberis, A; Paradiso, R

2008-01-01

Smart fabrics and interactive textiles (SFIT) are fibrous structures that are capable of sensing, actuating, generating/storing power and/or communicating. Research and development towards wearable textile-based personal systems allowing e.g. health monitoring, protection & safety, and healthy lifestyle gained strong interest during the last 10 years. Under the Information and Communication Programme of the European Commission, a cluster of R&D projects dealing with smart fabrics and interactive textile wearable systems regroup activities along two different and complementary approaches i.e. 'application pull' and 'technology push'. This includes projects aiming at personal health management through integration, validation, and use of smart clothing and other networked mobile devices as well as projects targeting the full integration of sensors/actuators, energy sources, processing and communication within the clothes to enable personal applications such as protection/safety, emergency and healthcare. The integration part of the technologies into a real SFIT product is at present stage on the threshold of prototyping and testing. Several issues, technical as well user-centred, societal and business, remain to be solved. The paper presents on going major R&D activities, identifies gaps and discuss key challenges for the future.

Current Concepts in Hip Preservation Surgery

PubMed Central

Adler, Kelly L.; Cook, P. Christopher; Geisler, Paul R.; Yen, Yi-Meng; Giordano, Brian D.

2016-01-01

Context: Successful treatment of nonarthritic hip pain in young athletic individuals remains a challenge. A growing fund of clinical knowledge has paralleled technical innovations that have enabled hip preservation surgeons to address a multitude of structural variations of the proximal femur and acetabulum and concomitant intra-articular joint pathology. Often, a combination of open and arthroscopic techniques are necessary to treat more complex pathomorphologies. Peri- and postoperative recovery after such procedures can pose a substantial challenge to the patient, and a dedicated, thoughtful approach may reduce setbacks, limit morbidity, and help optimize functional outcomes. Evidence Acquisition: PubMed and CINAHL databases were searched to identify relevant scientific and review articles through December 2014 using the search terms hip preservation, labrum, surgical dislocation, femoroacetabular impingement, postoperative rehabilitation, peri-acetabular osteotomy, and rotational osteotomy. Reference lists of included articles were reviewed to locate additional references of interest. Study Design: Clinical review. Level of Evidence: Level 4. Results: Hip preservation procedures and appropriate rehabilitation have allowed individuals to return to a physically active lifestyle. Conclusion: Effective postoperative rehabilitation must consider modifications and precautions specific to the particular surgical techniques used. Proper postoperative rehabilitation after hip preservation surgery may help optimize functional recovery and maximize clinical success and patient satisfaction. PMID:26733593

Synthetic Vision Displays for Planetary and Lunar Lander Vehicles

NASA Technical Reports Server (NTRS)

Arthur, Jarvis J., III; Prinzel, Lawrence J., III; Williams, Steven P.; Shelton, Kevin J.; Kramer, Lynda J.; Bailey, Randall E.; Norman, Robert M.

2008-01-01

Aviation research has demonstrated that Synthetic Vision (SV) technology can substantially enhance situation awareness, reduce pilot workload, improve aviation safety, and promote flight path control precision. SV, and related flight deck technologies are currently being extended for application in planetary exploration vehicles. SV, in particular, holds significant potential for many planetary missions since the SV presentation provides a computer-generated view for the flight crew of the terrain and other significant environmental characteristics independent of the outside visibility conditions, window locations, or vehicle attributes. SV allows unconstrained control of the computer-generated scene lighting, terrain coloring, and virtual camera angles which may provide invaluable visual cues to pilots/astronauts, not available from other vision technologies. In addition, important vehicle state information may be conformally displayed on the view such as forward and down velocities, altitude, and fuel remaining to enhance trajectory control and vehicle system status. The paper accompanies a conference demonstration that introduced a prototype NASA Synthetic Vision system for lunar lander spacecraft. The paper will describe technical challenges and potential solutions to SV applications for the lunar landing mission, including the requirements for high-resolution lunar terrain maps, accurate positioning and orientation, and lunar cockpit display concepts to support projected mission challenges.

Data Management in Astrobiology: Challenges and Opportunities for an Interdisciplinary Community

PubMed Central

Suomela, Todd; Malone, Jim

2014-01-01

Abstract Data management and sharing are growing concerns for scientists and funding organizations throughout the world. Funding organizations are implementing requirements for data management plans, while scientists are establishing new infrastructures for data sharing. One of the difficulties is sharing data among a diverse set of research disciplines. Astrobiology is a unique community of researchers, containing over 110 different disciplines. The current study reports the results of a survey of data management practices among scientists involved in the astrobiology community and the NASA Astrobiology Institute (NAI) in particular. The survey was administered over a 2-month period in the first half of 2013. Fifteen percent of the NAI community responded (n=114), and additional (n=80) responses were collected from members of an astrobiology Listserv. The results of the survey show that the astrobiology community shares many of the same concerns for data sharing as other groups. The benefits of data sharing are acknowledged by many respondents, but barriers to data sharing remain, including lack of acknowledgement, citation, time, and institutional rewards. Overcoming technical, institutional, and social barriers to data sharing will be a challenge into the future. Key Words: Data management—Data sharing—Data preservation. Astrobiology 14, 451–461. PMID:24840364

Investigating How to Align Schools' Marketing Environments With Federal Standards for Competitive Foods.

PubMed

Polacsek, Michele; O'Brien, Liam M; Pratt, Elizabeth; Whatley-Blum, Janet; Adler, Sabrina

2017-03-01

Limiting food and beverage marketing to children is a promising approach to influence children's nutrition behavior. School-based marketing influences nutrition behavior and studies have consistently found marketing for nonnutritious foods and beverages in schools. No studies have examined the resources necessary to align school marketing environments with federal school nutrition standards. The purpose of this study was to determine how to improve school marketing environments so that they align with new federal competitive food nutrition standards. We assessed food marketing environments in 3 Portland, Maine schools using the Food and Beverage Marketing Survey (FBMS) and provided technical assistance to bring their marketing environments into conformity with the federal competitive food regulations, tracking resources and strategies for marketing removal. Noncompliant marketing was significantly reduced pre- to postintervention. Intervention strategies were facilitated by the School Health Coordinator and school-based wellness teams. Low monetary resources were required to remove marketing not compliant with federal nutrition standards for foods sold in schools. Several key challenges remain to sustain efforts. This study provides timely information for policymakers to support crafting policies that address the realities of school nutrition environments and universal enforcement challenges. © 2017, American School Health Association.

Control of the exercise hyperpnoea in humans: a modeling perspective.

PubMed

Ward, S A

2000-09-01

Models of the exercise hyperpnoea have classically incorporated elements of proportional feedback (carotid and medullary chemosensory) and feedforward (central and/or peripheral neurogenic) control. However, the precise details of the control process remain unresolved, reflecting in part both technical and interpretational limitations inherent in isolating putative control mechanisms in the intact human, and also the challenges to linear control theory presented by multiple-input integration, especially with regard to the ventilatory and gas-exchange complexities encountered at work rates which engender a metabolic acidosis. While some combination of neurogenic, chemoreflex and circulatory-coupled processes are likely to contribute to the control, the system appears to evidence considerable redundancy. This, coupled with the lack of appreciable error signals in the mean levels of arterial blood gas tensions and pH over a wide range of work rates, has motivated the formulation of innovative control models that reflect not only spatial interactions but also temporal interactions (i.e. memory). The challenge is to discriminate between robust competing control models that: (a) integrate such processes within plausible physiological equivalents; and (b) account for both the dynamic and steady-state system response over a range of exercise intensities. Such models are not yet available.

Online Monitoring To Enable Improved Diagnostics, Prognostics and Maintenance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bond, Leonard J.

2011-08-31

Only time will tell what the implications of the Fukushima incident will be. Discussions are on-going with regard to continued operation and life extension of the existing fleet, new build, and the wider policy issues including technologies needed to address spent fuel storage and ensure energy security, and the related desires to provide sustainable energy systems while at the same time limiting greenhouse gas emissions. The science base for advanced diagnostics and prognostics to support its use in nuclear power plants (NPPs) for active components (pumps, valves etc) has been demonstrated. A challenge is enabling adaption of these technologies formore » NPP deployment and the validation of the data from these technologies. Advanced diagnostics, monitoring and prognostics applied to passive structures, which in the USA context of longer term operation is up to 80 years, are being researched. Early laboratory work is demonstrating the potential for these methods, although technical challenges remain. It can be expected that there will be an increased need for and use of on-line monitoring for a wide range of both active and passive systems in all types of nuclear power plants.« less

Constraints Militating against the Implementation of Production/Service Work in Technical Colleges in North Central Nigeria

ERIC Educational Resources Information Center

Agu, Peter A.

2016-01-01

Skill acquisition is a critical component of any vocational technical training program. When this component is missing or falls below expectation, it tends to defeat the objectives of the program. In Nigeria, many skill-oriented schools experience great challenges in trying to provide for the necessary facilities required for effective technical…

Tips for a Successful Job Search. PEPNet Tipsheet

ERIC Educational Resources Information Center

PEPNet-Northeast, 2009

2009-01-01

Looking for a job can be a challenging experience. It helps to have a positive attitude and to be well prepared for every aspect of the job search. This tipsheet uses information from the NTID (National Technical Institute for the Deaf) Center on Employment (NCE) at Rochester Institute of Technology/National Technical Institute for the Deaf and…

A Framework for 21st-Century Career-Technical and Workforce Education Curricula

ERIC Educational Resources Information Center

Rojewski, Jay W.; Hill, Roger B.

2017-01-01

Increasingly, career-technical and workforce education professionals are challenged with determining the best ways to prepare people for work, when many of the jobs those people will perform do not exist yet. Twenty-first-century work is evolving rapidly, with some jobs going away, other types of work appearing, and many people working in jobs…

Promoting Equal Access of Girls/Women to Technical and Vocational Education.

ERIC Educational Resources Information Center

Mishra, Arun; Khanna, Pinki; Shrivastava, Nalini

Despite United Nations' efforts, inequality of access for girls and women to technical and vocational education (TVE) persists in India. Challenges of the 21st century with regard to ensuring equal access of girls and women to TVE include: increasing the participation of girls (especially rural girls) in TVE; overcoming gender bias and…

Exploring Electrochromics: A Series of Eye-Catching Experiments to Introduce Students to Multidisciplinary Research

ERIC Educational Resources Information Center

Small, Leo J.; Wolf, Steven; Spoerke, Erik D.

2014-01-01

Introducing students to a multidisciplinary research laboratory presents challenges in terms of learning specific technical skills and concepts but also with respect to integrating different technical elements to form a coherent picture of the research. Here we present a multidisciplinary series of experiments we have developed in the Electronic,…

Technical and Vocational Education and Training and the Labour Market in Israel

ERIC Educational Resources Information Center

Eisenberg, Eli

2006-01-01

The aim of this report is to contribute to a better understanding of the current status of technical and vocational education and training (TVET) for human resources development (HRD) and the labour market in Israel. It describes the role and involvement of the various sectors in HRD and identifies the barriers, challenges, priorities, initiatives…

Wisconsin Technical College System Board Equity Staff Development Workshops and Services--Phase IV. Final Report.

ERIC Educational Resources Information Center

Baldus, Lorayne

A staff development program on gender equity was conducted for personnel in Wisconsin's technical colleges using the train-the-trainer method. The training took two approaches: a class for college personnel and career challenge training for project directors of single parent and displaced homemaker grants. The inservice class resulted in increased…

Technical and Professional Communication Programs and the Small College Setting: Opportunities and Challenges

ERIC Educational Resources Information Center

Latterell, Catherine G.

2003-01-01

This article argues that the small school context has been a relatively unexamined or under-examined context for technical and professional communication program development. While graduate program development holds a large share of the field's attention in recent national forums, growth in graduate programs is a consequence of demand in the job…

Design and sampling plan optimization for RT-qPCR experiments in plants: a case study in blueberry

USDA-ARS?s Scientific Manuscript database

The qPCR assay has become a routine technology in plant biotechnology and agricultural research. It is unlikely to be technically improved in the near future, but there are still challenges which center around minimizing the variability in results and transparency when reporting technical data in su...

Lost in translation: assessing effectiveness of focus group questioning techniques to develop improved translation of terminology used in HIV prevention clinical trials.

PubMed

Mack, Natasha; Ramirez, Catalina B; Friedland, Barbara; Nnko, Soori

2013-01-01

Achieving participant comprehension has proven to be one of the most difficult, practical, and ethical challenges of HIV prevention clinical trials. It becomes even more challenging when local languages do not have equivalent scientific and technical vocabularies, rendering communication of scientific concepts in translated documents extremely difficult. Even when bilingual lexicons are developed, there is no guarantee that participants understand the terminology as translated. We conducted twelve focus groups with women of reproductive age in Mwanza, Tanzania to explore the effectiveness of four questioning techniques for: (1) assessing participants' familiarity with existing technical terms and concepts, (2) generating a list of acceptable technical and non-technical terms, (3) testing our definitions of technical terms, and (4) verifying participants' preferences for terms. Focus groups were transcribed, translated, and qualitatively analyzed. A translation process that uses all four questioning techniques in a step-wise approach is an effective way to establish a baseline understanding of participants' familiarity with research terms, to develop and test translatable definitions, and to identify participants' preferred terminology for international HIV clinical research. This may help to ensure that important concepts are not "lost in translation." The results emphasize the importance of using a variety of techniques depending on the level of participant familiarity with research concepts, the existence of colloquial or technical terms in the target language, and the inherent complexity of the terms.

Lost in Translation: Assessing Effectiveness of Focus Group Questioning Techniques to Develop Improved Translation of Terminology Used in HIV Prevention Clinical Trials

PubMed Central

Mack, Natasha; Ramirez, Catalina B.; Friedland, Barbara; Nnko, Soori

2013-01-01

Introduction Achieving participant comprehension has proven to be one of the most difficult, practical, and ethical challenges of HIV prevention clinical trials. It becomes even more challenging when local languages do not have equivalent scientific and technical vocabularies, rendering communication of scientific concepts in translated documents extremely difficult. Even when bilingual lexicons are developed, there is no guarantee that participants understand the terminology as translated. Methods We conducted twelve focus groups with women of reproductive age in Mwanza, Tanzania to explore the effectiveness of four questioning techniques for: (1) assessing participants' familiarity with existing technical terms and concepts, (2) generating a list of acceptable technical and non-technical terms, (3) testing our definitions of technical terms, and (4) verifying participants' preferences for terms. Focus groups were transcribed, translated, and qualitatively analyzed. Results and Discussion A translation process that uses all four questioning techniques in a step-wise approach is an effective way to establish a baseline understanding of participants' familiarity with research terms, to develop and test translatable definitions, and to identify participants' preferred terminology for international HIV clinical research. This may help to ensure that important concepts are not “lost in translation.” The results emphasize the importance of using a variety of techniques depending on the level of participant familiarity with research concepts, the existence of colloquial or technical terms in the target language, and the inherent complexity of the terms. PMID:24040075

Challenges to implementing Gavi's health system strengthening support in Chad and Cameroon: results from a mixed-methods evaluation.

PubMed

Dansereau, Emily; Miangotar, Yodé; Squires, Ellen; Mimche, Honoré; El Bcheraoui, Charbel

2017-11-16

Since 2005, Gavi has provided health system strengthening (HSS) grants to address bottlenecks affecting immunization services. This study is the first to evaluate the Gavi HSS implementation process in either Cameroon or Chad, two countries with significant health system challenges and poor achievement on the child and maternal health Millennium Development Goals. We triangulated quantitative and qualitative data including financial records, document review, field visit questionnaires, and key informant interviews (KII) with representatives from the Ministries of Health, Gavi, and other partners. We conducted a Root Cause Analysis of key implementation challenges, guided by the Consolidated Framework for Implementation Research. We conducted 124 field visits and 43 KIIs in Cameroon, and 57 field visits and 39 KIIs in Chad. Cameroon's and Chad's HSS programs were characterized by delayed disbursements, significant deviations from approved expenditures, and reprogramming of funds. Nearly a year after the programs were intended to be complete, many district and facility-level activities were only partially implemented and significant funds remained unabsorbed. Root causes of these challenges included unpredictable Gavi processes and disbursements, poor communication between the countries and Gavi, insufficient country planning without adequate technical assistance, lack of country staff and leadership, and weak country systems to manage finances and promote institutional memory. Though Chad and Cameroon both critically needed support to strengthen their weak health systems, serious challenges drastically limited implementation of their Gavi HSS programs. Implementation of future HSS programs in these and similar settings can be improved by transparent and reliable procedures and communication from Gavi, proposals that account for countries' programmatic capacity and the potential for delayed disbursements, implementation practices that foster learning and adaptation, and an early emphasis on developing managerial and other human resources.

Challenges and Perspectives for Tertiary Level Hospitals in Bolivia: The case of Santa Cruz de La Sierra Department.

PubMed

Medici, André

2015-01-01

Current legislation transferred public tertiary hospitals in Bolivia from the Municipalities to the Regional Level. However, the Regional Governments are experiencing technical and financial constraints to reform infrastructure, modernize equipment and introduce reforms to allow better governance, management and sustainability of these hospitals. This articles summarizes the recent experience of the Government of Santa Cruz de la Sierra in Bolivia where five tertiary hospitals and blood bank (most of them in precarious working conditions) has been transferred in 2012 from the Municipal Government of Santa Cruz (the capital) to the Regional Government of Santa Cruz. To face the challenges, the Regional Government of Santa Cruz implement several improvements, such as contract new clinical and administrative personal, increases hospital budgetary autonomy, outsource hospitals' auxiliary services, take measures to eliminate waiting lists and make several new investments to modernize and equip the hospitals. The World Bank was contracted to evaluated the future financial sustainability of these investments and to advice the Government to propose changes to increase the hospitals' management performance. The article describes the remaining challenges in these hospitals and the proposals from the World Bank Study. In the area of quality of care, the main challenge is to improve client satisfaction and continuous outcomes monitoring and evaluation according quality standards. In the area of financing, the challenge is how to assure the sustainability of these hospitals with the current level of health financing and the insufficient financial transfers from the National Government. In the area of Governance, reforms to streamline and simplify internal processes need to be introduced in order to establish mechanisms to increase transparency and accountability, allowing the hospital to have a good administration and adequate participation of the main actors in the guidance of the institution.

Flight Testing of the Gulfstream Quiet Spike(TradeMark) on a NASA F-15B

NASA Technical Reports Server (NTRS)

Smolka, James W.; Cowert, Robert A.; Molzahn, Leslie M.

2007-01-01

Gulfstream Aerospace has long been interested in the development of an economically viable supersonic business jet (SBJ). A design requirement for such an aircraft is the ability for unrestricted supersonic flight over land. Although independent studies continue to substantiate that a market for a SBJ exists, regulatory and public acceptance challenges still remain for supersonic operation over land. The largest technical barrier to achieving this goal is sonic boom attenuation. Gulfstream's attention has been focused on fundamental research into sonic boom suppression for several years. This research was conducted in partnership with the NASA Aeronautics Research Mission Directorate (ARMD) supersonic airframe cruise efficiency technical challenge. The Quiet Spike, a multi-stage telescopic nose boom and a Gulfstream-patented design (references 1 and 2), was developed to address the sonic boom attenuation challenge and validate the technical feasibility of a morphing fuselage. The Quiet Spike Flight Test Program represents a major step into supersonic technology development for sonic boom suppression. The Gulfstream Aerospace Quiet Spike was designed to reduce the sonic boom signature of the forward fuselage for an aircraft flying at supersonic speeds. In 2004, the Quiet Spike Flight Test Program was conceived by Gulfstream and NASA to demonstrate the feasibility of sonic boom mitigation and centered on the structural and mechanical viability of the translating test article design. Research testing of the Quiet Spike consisted of numerous ground and flight operations. Each step in the process had unique objectives, and involved numerous test team members from the NASA Dryden Flight Research Center (DFRC) and Gulfstream Aerospace. Flight testing of the Quiet Spike was conducted at the NASA Dryden Flight Research Center on an F-15B aircraft from August, 2006, to February, 2007. During this period, the Quiet Spike was flown at supersonic speeds up to Mach 1.8 at the maximum design dynamic pressure of 685 pounds per square foot. Extension and retraction tests were conducted at speeds up to Mach 1.4. The design of the Quiet Spike to shape the forward shock wave environment of the aircraft was confirmed during near-field shock wave probing at Mach 1.4. Thirty-two flights were performed without incident and all project objectives were achieved. The success of the Quiet Spike Flight Test Program represents an important step towards developing commercial aircraft capable of supersonic flight over land within the continental United States and in international airspace.

Identifying best practices for managing operating costs for rural and small urban transportation systems: technical report.

DOT National Transportation Integrated Search

2016-08-01

Rural and small urban transit providers across the United States face fiscal challenges caused by the growing : gap between the cost of providing transit service and available federal, state, and local funding. In Texas, the : fiscal challenges facin...

Teaching Sustainable Design Using BIM and Project-Based Energy Simulations

ERIC Educational Resources Information Center

Shen, Zhigang; Jensen, Wayne; Wentz, Timothy; Fischer, Bruce

2012-01-01

The cross-disciplinary nature of energy-efficient building design has created many challenges for architecture, engineering and construction instructors. One of the technical challenges in teaching sustainable building design is enabling students to quantitatively understand how different building designs affect a building's energy performance.…

Interoperable Acquisition for Systems of Systems: The Challenges

DTIC Science & Technology

2006-09-01

Interoperable Acquisition for Systems of Systems: The Challenges James D. Smith II D. Mike Phillips September 2006 TECHNICAL NOTE...Failure of Program-Centric Risk Management 10 3.3.2 Absence of System-of-Systems Engineering 12 3.3.3 Disconnect Between System-of-Systems...SOFTWARE ENGINEERING INSTITUTE | vii viii | CMU/SEI-2006-TN-034 Abstract Large, complex systems development has always been challenging , even when the

NASA Extreme Environment Mission Operation (NEEMO) 12: Collaborative Accelerated Medical Technology Development

DTIC Science & Technology

2007-12-01

tremendous opportunity to support telesurgical care using mobile systems, where communication assets are challenging . BODY RESEARCH PLAN This... challenged with constraints of remoteness, limited resources, and limited technical expertise. This telesurgery research, funded by TATRC and reported...utilized iChat (V.2.1.3) for the Apple Macintosh. Technology Summary The challenges of implementing the technology were numerous. Beyond the fact that

Minimally invasive clamp-assisted reduction and cephalomedullary nailing without cerclage cables for subtrochanteric femur fractures in the elderly: Surgical technique and results.

PubMed

Mingo-Robinet, Juan; Torres-Torres, Miguel; Moreno-Barrero, María; Alonso, Juan Antonio; García-González, Sara

2015-01-01

The treatment of subtrochanteric fractures in the elderly remains technically challenging, due to instability and osteoporosis, with high reoperation rates. Even if intramedullary nailing is the most reliable treatment, reduction is difficult and cerclage wiring remains controversial. The purpose of this study was to evaluate 26 consecutive subtrochanteric fractures in elderly patients treated with a minimally invasive clamp-assisted reduction and cephalomedullary nailing without cerclage wiring. A retrospective analysis was conducted between January 2010 and September 2013. Data obtained from the medical records included patient's age, sex, classification of the fracture, the quality of reduction after surgery, and the presence of postoperative complications, especially fracture displacement and delayed union or nonunion. Twenty-six patients had adequate radiographic and clinical follow-up. Mean age was 84.4 (range 75-96) years. The mean duration of follow-up was 7.6 months (6-14 months). Mean surgical time was 74.42 min (range 45-115 min). Twenty-four (92.3%) showed acceptable varus/valgus alignment, and no sagittal plane malunions were noted. The tip-apex distance was <25 mm in all cases. Distraction at the fracture was <10mm in 21 fractures. Three patients had limb length discrepancy of 1cm. All fractures healed uneventfully. Reducing the fracture before nailing is mandatory to achieve good results. Minimally invasive clamp reduction without cerclage wires, even if challenging, has proven to be a safe, reproducible, and effective surgical technique, with at least the same results as other series. Copyright © 2015 Elsevier Ltd. All rights reserved.

A House Full of Trap Doors. Identifying barriers to resilient drylands in the toolbox of pastoral development

NASA Astrophysics Data System (ADS)

Krätli, Saverio; Kaufmann, Brigitte; Roba, Hassan; Hiernaux, Pierre; Li, Wenjun; Easdale, Marcos H.; Huelsebusch, Christian

2016-04-01

The theoretical understanding of drylands and pastoral systems has long undergone a U-turn from the initial perspective rooted in classical ecology. The shift has hinged on the way to represent asymmetric variability, from a disturbance in an ecosystem that naturally tends towards uniformity and stability, to a constitutive part of a dynamic ecosystem. Operationalising the new reversed perspective, including the need to update the methodological infrastructure to plan around drylands and pastoral development, remains a challenge. Underlying assumptions about stability and uniformity, that are a legacy of equilibrium thinking, remain embedded in the toolbox of pastoral development, starting from the technical language to talk about the subject. This effectively gets in the way of operationalizing state of the art understanding of pastoral systems and the drylands. Unless these barriers are identified, unpacked and managed, even the present calls for increasing the rigour and intensity of data collection - for example as part of the ongoing global process to revise and improve agricultural data - cannot deliver a realistic representation of pastoral systems in statistics and policy making. This contribution presents the case for understanding variability as an asset, and provides a range of examples of methodological barriers, including classifications of livestock systems, scale of observation, key parameters in animal production, indicators in the measurement of ecological efficiency, concepts of ecological fragility, natural resources, and pastoral risk. The need to update this legacy is a pressing challenge for policy makers concerned with both modernisation and resilience in the drylands.

Strategies for regeneration of heart muscle.

PubMed

Guyette, Jacques P; Cohen, Ira S; Gaudette, Glenn R

2010-01-01

Regenerative medicine has emerged to the forefront of cardiac research, marrying discoveries in both basic science and engineering to develop viable therapeutic approaches for treating the diseased heart. Signifi cant advancements in gene therapy, stem cell biology, and cardiomyoplasty provide new optimism for regenerating damaged myocardium. Exciting new strategies for endogenous and exogenous regeneration have been proposed. However, questions remain as to whether these approaches can provide enough new myocyte mass to sufficiently restore mechanical function to the heart. In this article, we consider the mechanisms of endogenous cardiomyocyte regeneration and exogenous cell differentiation (with respect to myoblasts, stem cells, and induced pluripotent cells being researched for cell therapies). We begin by reviewing some of the cues that are being harnessed in strategies of gene/cell therapy for regenerating myocardium. We also consider some of the technical challenges that remain in determining new myocyte generation, tracking delivered cells in vivo, and correlating new myocyte contractility with cardiac function. Strategies for regenerating the heart are being realized as both animal and clinical trials suggest that these new approaches provide short-term improvement of cardiac function. However, a more complete understanding of the underlying mechanisms and applications is necessary to sustain longer-term therapeutic success.

The importance of material resources and qualified trainers in adult non-formal education and training centres in South Africa

NASA Astrophysics Data System (ADS)

Mayombe, Celestin; Lombard, Antoinette

2016-04-01

Non-formal education and training (NFET) programmes in public and private centres in South Africa aim to meet the training needs of adults who have been deprived of formal education which would have fostered skills acquisition and access to employment earlier in their lives. The concern which informs this paper is that adults who face long-term unemployment due to a lack of marketable skills often remain unemployed after completing NFET programmes. The paper assesses the extent to which material and human resources have affected skills acquisition and graduate employment in KwaZulu-Natal, South Africa. The results show that material and human resource challenges in most public and some private centres have led to gaps in skills training. Programmes focus too strongly on academic credits and certificates and not enough on employment as an end goal. The authors argue that the existence of suitable training materials and qualified trainers with practical experience and specific technical skills constitutes favourable conditions ("enabling environments") for graduate employment. Without improvement in material and human resources, adult trainees will continue to experience difficulties integrating into the labour market, and the cycle of poverty and social exclusion will remain unbroken.

Satellite Tasking via a Tablet Computer

DTIC Science & Technology

2015-09-01

connectivity have helped to overcome the challenges of information delivery , but there remains the challenge of real-time information. This thesis...have helped to overcome the challenges of information delivery , but there remains the challenge of real-time information. This thesis examines the...76  3.  Integration with Existing Programs for Access and Dissemination of Imagery

Multivalent display of proteins on viral nanoparticles using molecular recognition and chemical ligation strategies

PubMed Central

Venter, P. Arno; Dirksen, Anouk; Thomas, Diane; Manchester, Marianne; Dawson, Philip E.; Schneemann, Anette

2011-01-01

Multivalent display of heterologous proteins on viral nanoparticles forms a basis for numerous applications in nanotechnology, including vaccine development, targeted therapeutic delivery and tissue-specific bio-imaging. In many instances, precise placement of proteins is required for optimal functioning of the supramolecular assemblies, but orientation- and site-specific coupling of proteins to viral scaffolds remains a significant technical challenge. We have developed two strategies that allow for controlled attachment of a variety of proteins on viral particles using covalent and noncovalent principles. In one strategy, an interaction between domain 4 of anthrax protective antigen and its receptor was used to display multiple copies of a target protein on virus-like particles. In the other, expressed protein ligation and aniline-catalyzed oximation was used to covalently display a model protein. The latter strategy, in particular, yielded nanoparticles that induced potent immune responses to the coupled protein, suggesting potential applications in vaccine development. PMID:21545187

[Poliomyelitis--Challenges for the Last Mile of the Eradication Programme].

PubMed

Müller, O; Jahn, A; Razum, O

2016-04-01

The World Health Organisation initiated the Global Polio Eradication Initiative in the year 1988. With the large-scale application of routine and mass vaccinations in children under the age of 5 years, polio disease has become restricted to only 3 endemic countries (Afghanistan, Pakistan and Nigeria) by today. However, since the beginning of the 21st century, increasing numbers of secondary polio epidemics have been observed which were triggered through migration, political turmoil and weak health systems. In addition, there emerged serious technical (e. g., back-mutations of oral vaccine virus to wild virus) and socio-political (refusal of vaccinations in Muslim populations of Nigeria and Pakistan) problems with the vaccination in the remaining endemic countries. It thus appears questionable if the current eradiation initiative will reach its goal in the foreseeable future. © Georg Thieme Verlag KG Stuttgart · New York.

Subunit Organisation of In Vitro Reconstituted HOPS and CORVET Multisubunit Membrane Tethering Complexes

PubMed Central

Guo, Zhong; Johnston, Wayne; Kovtun, Oleksiy; Mureev, Sergey; Bröcker, Cornelia; Ungermann, Christian; Alexandrov, Kirill

2013-01-01

Biochemical and structural analysis of macromolecular protein assemblies remains challenging due to technical difficulties in recombinant expression, engineering and reconstitution of multisubunit complexes. Here we use a recently developed cell-free protein expression system based on the protozoan Leishmania tarentolae to produce in vitro all six subunits of the 600 kDa HOPS and CORVET membrane tethering complexes. We demonstrate that both subcomplexes and the entire HOPS complex can be reconstituted in vitro resulting in a comprehensive subunit interaction map. To our knowledge this is the largest eukaryotic protein complex in vitro reconstituted to date. Using the truncation and interaction analysis, we demonstrate that the complex is assembled through short hydrophobic sequences located in the C-terminus of the individual Vps subunits. Based on this data we propose a model of the HOPS and CORVET complex assembly that reconciles the available biochemical and structural data. PMID:24312556

Superelastic, superabsorbent and 3D nanofiber-assembled scaffold for tissue engineering.

PubMed

Chen, Weiming; Ma, Jun; Zhu, Lei; Morsi, Yosry; -Ei-Hamshary, Hany; Al-Deyab, Salem S; Mo, Xiumei

2016-06-01

Fabrication of 3D scaffold to mimic the nanofibrous structure of the nature extracellular matrix (ECM) with appropriate mechanical properties and excellent biocompatibility, remain an important technical challenge in tissue engineering. The present study reports the strategy to fabricate a 3D nanofibrous scaffold with similar structure to collagen in ECM by combining electrospinning and freeze-drying technique. With the technique reported here, a nanofibrous structure scaffold with hydrophilic and superabsorbent properties can be readily prepared by Gelatin and Polylactic acid (PLA). In wet state the scaffold also shows a super-elastic property, which could bear a compressive strain as high as 80% and recovers its original shape afterwards. Moreover, after 6 days of culture, L-929 cells grow, proliferate and infiltrated into the scaffold. The results suggest that this 3D nanofibrous scaffold would be promising for varied field of tissue engineering application. Copyright © 2016 Elsevier B.V. All rights reserved.

Building an HIV continuum for inmates: New York State's criminal justice initiative.

PubMed

Klein, Susan J; O'Connell, Daniel A; Devore, Barbara S; Wright, Lester N; Birkhead, Guthrie S

2002-10-01

The benefits of public health, corrections, and community-based organization (CBO) collaboration to meet HIV prevention needs of inmates are recognized. Each year over 100,000 inmates, most of whom have a history that put them at HIV risk, pass through the New York State (NYS) prison system. The NYS Department of Health AIDS Institute, the NYS Department of Correctional Services, the NYS Division of Parole, and a statewide network of CBOs collaborate to meet HIV prevention and support services needs of inmates and parolees through a continuum of interventions and services. This article describes the evolution of the prevention, supportive services, and transitional planning continuum within the NYS prison system. It identifies other agencies involved, obstacles to service delivery, describes approaches to overcome them, discusses ways to meet capacity building and technical assistance needs of CBOs, identifies challenges remaining, and provides practical advice from actual experience in NYS.

Service Modeling Language Applied to Critical Infrastructure

NASA Astrophysics Data System (ADS)

Baldini, Gianmarco; Fovino, Igor Nai

The modeling of dependencies in complex infrastructure systems is still a very difficult task. Many methodologies have been proposed, but a number of challenges still remain, including the definition of the right level of abstraction, the presence of different views on the same critical infrastructure and how to adequately represent the temporal evolution of systems. We propose a modeling methodology where dependencies are described in terms of the service offered by the critical infrastructure and its components. The model provides a clear separation between services and the underlying organizational and technical elements, which may change in time. The model uses the Service Modeling Language proposed by the W3 consortium for describing critical infrastructure in terms of interdependent services nodes including constraints, behavior, information flows, relations, rules and other features. Each service node is characterized by its technological, organizational and process components. The model is then applied to a real case of an ICT system for users authentication.

Solar Hot Air Balloons: A Low Cost, Multi-hour Flight System for Lightweight Scientific Instrumentation Packages

NASA Astrophysics Data System (ADS)

Bowman, D. C.; Albert, S.; Dexheimer, D.; Murphy, S.; Mullen, M.

2017-12-01

Existing scientific ballooning solutions for multi hour flights in the upper troposphere/lower stratosphere are expensive and/or technically challenging. In contrast, solar hot air balloons are inexpensive and simple to construct. These balloons, which rely solely on sunlight striking a darkened envelope, can deliver payloads to 22 km altitude and maintain level flight until sunset. We describe an experimental campaign in which five solar hot air balloons launched in 45 minutes created a free flying infrasound (low frequency sound) microphone network that remained in the air for over 12 hours. We discuss the balloons' trajectory, maximum altitude, and stability as well as present results from the infrasound observations. We assess the performance and limitations of this design for lightweight atmospheric instrumentation deployments that require multi-hour flight times. Finally, we address the possibilities of multi day flights during the polar summer and on other planets.

A facile preparation route for netlike microstructures on a stainless steel using an ethanol-mediated femtosecond laser irradiation.

PubMed

Bian, Hao; Yang, Qing; Liu, Hewei; Chen, Feng; Du, Guangqing; Si, Jinhai; Hou, Xun

2013-03-01

Netlike or porous microstructures are highly desirable in metal implants and biomedical monitoring applications. However, realization of such microstructures remains technically challenging. Here, we report a facile and environmentally friendly method to prepare netlike microstructures on a stainless steel by taking the full advantage of the liquid-mediated femtosecond laser ablation. An unordered netlike structure and a quasi-ordered array of holes can be fabricated on the surface of stainless steel via an ethanol-mediated femtosecond laser line-scan method. SEM analysis of the surface morphology indicates that the porous netlike structure is in the micrometer scale and the diameter of the quasi-ordered holes ranges from 280 nm to 320 nm. Besides, we find that the obtained structures are tunable by altering the laser processing parameters especially scanning speed. Copyright © 2012 Elsevier B.V. All rights reserved.

GRACEnet: addressing policy needs through coordinated cross-location research

USGS Publications Warehouse

Jawson, Michael D.; Walthall, Charles W.; Shafer, Steven R.; Liebig, Mark; Franzluebbers, Alan J.; Follett, Ronald F.

2012-01-01

GRACEnet (Greenhouse gas Reduction through Agricultural Carbon Enhancement network) was conceived to build upon ongoing USDA Agricultural Research Service (ARS) research to improve soil productivity, while addressing the challenges and opportunities of interest in C sequestration from a climate change perspective. The vision for GRACEnet was and remains: Knowledge and information used to implement scientifically based agricultural management practices from the field to national policy scales on C sequestration, greenhouse gas (GHG) emissions, and environmental benefits. The national focus of GRACEnet uses a standardized approach by ARS laboratories and university and land manager (e.g. farmer and rancher) cooperators to assess C sequestration and GHG emission from different crop and grassland systems. Since 2002, GRACEnet has significantly expanded GHG mitigation science and delivered usable information to agricultural research and policy organizations. Recent developments suggest GRACEnet will have international impact by contributing leadership and technical guidance for the Global Research Alliance on Agricultural Greenhouse Gases.

Friable but treatable: coronary artery dissections in Ehlers-Danlos syndrome.

PubMed

Zago, Alexandre C; Matte, Bruno S

2013-01-01

Vascular Ehlers-Danlos syndrome is a rare connective tissue disorder associated with arterial dissection or rupture. Percutaneous coronary intervention (PCI) is often critical in patients with this syndrome because their coronary arteries are prone to dissection, enhancing the risk of stent borders dissection when conventional stent deployment pressures are used. Coronary artery bypass graft (CABG) treatment for these patients may also raise concerns because the left internal mammary artery is probably friable. Therefore, coronary artery revascularization in vascular Ehlers-Danlos syndrome either using PCI or CABG is challenging due to the arteries friability. A small number of cases have been published describing the friability of the vessels and associated complications; nevertheless, the optimum treatment remains unclear. We report the case of a 54-year-old woman treated successfully with PCI and CABG in two different acute coronary syndrome episodes, in which specific technical issues related to both procedures were decisive. Copyright © 2011 Wiley Periodicals, Inc.

Left colectomy with intracoporeal anastomosis: technical aspects

PubMed Central

Araujo, Sérgio Eduardo Alonso; Seid, Victor Edmond; Klajner, Sidney; Bertoncini, Alexandre Bruno

2014-01-01

Oncologic laparoscopic colectomy represents a fully validated surgical approach to the management of colorectal cancer. However, laparoscopic surgery for distal transverse and descending colon lesions remains a challenging procedure. A total laparoscopic approach to the left colectomy is an interesting option for critically ill patients although reports in the literature on this subject are scarce and its approach still not standardized because of its selective nature for indication. There are several advantages associated with conduction of totally laparoscopic approach to the left colon. Intracorporeal vessel sealing ensures an adequate lymph node dissection. Moreover, it enables the construction of a well-vascularized anastomosis. Ultimately, the occurrence of late wound complications are possibly reduced for the placement of a low abdominal incision exclusively used for specimen extraction. This paper aimed at describing our technique for a totally laparoscopic left colectomy for distal transverse and descending colon lesions. PMID:25295460

Protein Science by DNA Sequencing: How Advances in Molecular Biology Are Accelerating Biochemistry.

PubMed

Higgins, Sean A; Savage, David F

2018-01-09

A fundamental goal of protein biochemistry is to determine the sequence-function relationship, but the vastness of sequence space makes comprehensive evaluation of this landscape difficult. However, advances in DNA synthesis and sequencing now allow researchers to assess the functional impact of every single mutation in many proteins, but challenges remain in library construction and the development of general assays applicable to a diverse range of protein functions. This Perspective briefly outlines the technical innovations in DNA manipulation that allow massively parallel protein biochemistry and then summarizes the methods currently available for library construction and the functional assays of protein variants. Areas in need of future innovation are highlighted with a particular focus on assay development and the use of computational analysis with machine learning to effectively traverse the sequence-function landscape. Finally, applications in the fundamentals of protein biochemistry, disease prediction, and protein engineering are presented.

Next generation sequencing--implications for clinical practice.

PubMed

Raffan, Eleanor; Semple, Robert K

2011-01-01

Genetic testing in inherited disease has traditionally relied upon recognition of the presenting clinical syndrome and targeted analysis of genes known to be linked to that syndrome. Consequently, many patients with genetic syndromes remain without a specific diagnosis. New 'next-generation' sequencing (NGS) techniques permit simultaneous sequencing of enormous amounts of DNA. A slew of research publications have recently demonstrated the tremendous power of these technologies in increasing understanding of human genetic disease. These approaches are likely to be increasingly employed in routine diagnostic practice, but the scale of the genetic information yielded about individuals means that caution must be exercised to avoid net harm in this setting. Use of NGS in a research setting will increasingly have a major but indirect beneficial impact on clinical practice. However, important technical, ethical and social challenges need to be addressed through informed professional and public dialogue before it finds its mature niche as a direct tool in the clinical diagnostic armoury.

Methods for genetic modification of megakaryocytes and platelets.

PubMed

Pendaries, Caroline; Watson, Stephen P; Spalton, Jennifer C

2007-09-01

During recent decades there have been major advances in the fields of thrombosis and haemostasis, in part through development of powerful molecular and genetic technologies. Nevertheless, genetic modification of megakaryocytes and generation of mutant platelets in vitro remains a highly specialized area of research. Developments are hampered by the low frequency of megakaryocytes and their progenitors, a poor efficiency of transfection and a lack of understanding with regard to the mechanism by which megakaryocytes release platelets. Current methods used in the generation of genetically modified megakaryocytes and platelets include mutant mouse models, cell line studies and use of viruses to transform primary megakaryocytes or haematopoietic precursor cells. This review summarizes the advantages, limitations and technical challenges of such methods, with a particular focus on recent successes and advances in this rapidly progressing field including the potential for use in gene therapy for treatment of patients with platelet disorders.

MOBE-ChIP: Probing Cell Type-Specific Binding Through Large-Scale Chromatin Immunoprecipitation.

PubMed

Wang, Shenqi; Lau, On Sun

2018-01-01

In multicellular organisms, the initiation and maintenance of specific cell types often require the activity of cell type-specific transcriptional regulators. Understanding their roles in gene regulation is crucial but probing their DNA targets in vivo, especially in a genome-wide manner, remains a technical challenge with their limited expression. To improve the sensitivity of chromatin immunoprecipitation (ChIP) for detecting the cell type-specific signals, we have developed the Maximized Objects for Better Enrichment (MOBE)-ChIP, where ChIP is performed at a substantially larger experimental scale and under low background conditions. Here, we describe the procedure in the study of transcription factors in the model plant Arabidopsis. However, with some modifications, the technique should also be implemented in other systems. Besides cell type-specific studies, MOBE-ChIP can also be used as a general strategy to improve ChIP signals.

Competency-Based Training and Simulation: Making a "Valid" Argument.

PubMed

Noureldin, Yasser A; Lee, Jason Y; McDougall, Elspeth M; Sweet, Robert M

2018-02-01

The use of simulation as an assessment tool is much more controversial than is its utility as an educational tool. However, without valid simulation-based assessment tools, the ability to objectively assess technical skill competencies in a competency-based medical education framework will remain challenging. The current literature in urologic simulation-based training and assessment uses a definition and framework of validity that is now outdated. This is probably due to the absence of awareness rather than an absence of comprehension. The following review article provides the urologic community an updated taxonomy on validity theory as it relates to simulation-based training and assessments and translates our simulation literature to date into this framework. While the old taxonomy considered validity as distinct subcategories and focused on the simulator itself, the modern taxonomy, for which we translate the literature evidence, considers validity as a unitary construct with a focus on interpretation of simulator data/scores.

Quantitative profiling of immune repertoires for minor lymphocyte counts using unique molecular identifiers.

PubMed

Egorov, Evgeny S; Merzlyak, Ekaterina M; Shelenkov, Andrew A; Britanova, Olga V; Sharonov, George V; Staroverov, Dmitriy B; Bolotin, Dmitriy A; Davydov, Alexey N; Barsova, Ekaterina; Lebedev, Yuriy B; Shugay, Mikhail; Chudakov, Dmitriy M

2015-06-15

Emerging high-throughput sequencing methods for the analyses of complex structure of TCR and BCR repertoires give a powerful impulse to adaptive immunity studies. However, there are still essential technical obstacles for performing a truly quantitative analysis. Specifically, it remains challenging to obtain comprehensive information on the clonal composition of small lymphocyte populations, such as Ag-specific, functional, or tissue-resident cell subsets isolated by sorting, microdissection, or fine needle aspirates. In this study, we report a robust approach based on unique molecular identifiers that allows profiling Ag receptors for several hundred to thousand lymphocytes while preserving qualitative and quantitative information on clonal composition of the sample. We also describe several general features regarding the data analysis with unique molecular identifiers that are critical for accurate counting of starting molecules in high-throughput sequencing applications. Copyright © 2015 by The American Association of Immunologists, Inc.

Resuspension of particles in an oscillating grid turbulent flow using PIV and 3D-PTV

NASA Astrophysics Data System (ADS)

H, Traugott; T, Hayse; A, Liberzon

2011-12-01

Description of the mechanisms responsible for the initiation of particle motion from a surface and re-entrainment of particles into suspension remains a challenge, partially due to the technical difficulties to quantify the forces applied on the particles and the collection of high resolution data of particle displacements simultaneously. In this study we explore the process of initial entrainment of spherical particles from smooth beds into zero-mean-shear turbulent flow in an oscillating grid chamber. Particle image velocimetry (PIV) and three-dimensional particle tracking velocimetry (3D-PTV) are used to correlate in a quantitative manner the turbulent flow properties responsible for pick-up, detachment and re-entrainment of particles. The results are compared to the existing models of critical shear velocity and provide further insight into the resuspension process of spherical particles in the transitional range of particle size Reynolds numbers 2 <= Rep <= 500.

Golden Gate Assembly of CRISPR gRNA expression array for simultaneously targeting multiple genes.

PubMed

Vad-Nielsen, Johan; Lin, Lin; Bolund, Lars; Nielsen, Anders Lade; Luo, Yonglun

2016-11-01

The engineered CRISPR/Cas9 technology has developed as the most efficient and broadly used genome editing tool. However, simultaneously targeting multiple genes (or genomic loci) in the same individual cells using CRISPR/Cas9 remain one technical challenge. In this article, we have developed a Golden Gate Assembly method for the generation of CRISPR gRNA expression arrays, thus enabling simultaneous gene targeting. Using this method, the generation of CRISPR gRNA expression array can be accomplished in 2 weeks, and contains up to 30 gRNA expression cassettes. We demonstrated in the study that simultaneously targeting 10 genomic loci or simultaneously inhibition of multiple endogenous genes could be achieved using the multiplexed gRNA expression array vector in human cells. The complete set of plasmids is available through the non-profit plasmid repository Addgene.

Versatile microwave-driven trapped ion spin system for quantum information processing

PubMed Central

Piltz, Christian; Sriarunothai, Theeraphot; Ivanov, Svetoslav S.; Wölk, Sabine; Wunderlich, Christof

2016-01-01

Using trapped atomic ions, we demonstrate a tailored and versatile effective spin system suitable for quantum simulations and universal quantum computation. By simply applying microwave pulses, selected spins can be decoupled from the remaining system and, thus, can serve as a quantum memory, while simultaneously, other coupled spins perform conditional quantum dynamics. Also, microwave pulses can change the sign of spin-spin couplings, as well as their effective strength, even during the course of a quantum algorithm. Taking advantage of the simultaneous long-range coupling between three spins, a coherent quantum Fourier transform—an essential building block for many quantum algorithms—is efficiently realized. This approach, which is based on microwave-driven trapped ions and is complementary to laser-based methods, opens a new route to overcoming technical and physical challenges in the quest for a quantum simulator and a quantum computer. PMID:27419233

Nonhuman Primate Optogenetics: Recent Advances and Future Directions

PubMed Central

Acker, Leah

2017-01-01

Optogenetics is the use of genetically coded, light-gated ion channels or pumps (opsins) for millisecond resolution control of neural activity. By targeting opsin expression to specific cell types and neuronal pathways, optogenetics can expand our understanding of the neural basis of normal and pathological behavior. To maximize the potential of optogenetics to study human cognition and behavior, optogenetics should be applied to the study of nonhuman primates (NHPs). The homology between NHPs and humans makes these animals the best experimental model for understanding human brain function and dysfunction. Moreover, for genetic tools to have translational promise, their use must be demonstrated effectively in large, wild-type animals such as Rhesus macaques. Here, we review recent advances in primate optogenetics. We highlight the technical hurdles that have been cleared, challenges that remain, and summarize how optogenetic experiments are expanding our understanding of primate brain function. PMID:29118219

Analysis of torque transmitting behavior and wheel slip prevention control during regenerative braking for high speed EMU trains

NASA Astrophysics Data System (ADS)

Xu, Kun; Xu, Guo-Qing; Zheng, Chun-Hua

2016-04-01

The wheel-rail adhesion control for regenerative braking systems of high speed electric multiple unit trains is crucial to maintaining the stability, improving the adhesion utilization, and achieving deep energy recovery. There remain technical challenges mainly because of the nonlinear, uncertain, and varying features of wheel-rail contact conditions. This research analyzes the torque transmitting behavior during regenerative braking, and proposes a novel methodology to detect the wheel-rail adhesion stability. Then, applications to the wheel slip prevention during braking are investigated, and the optimal slip ratio control scheme is proposed, which is based on a novel optimal reference generation of the slip ratio and a robust sliding mode control. The proposed methodology achieves the optimal braking performance without the wheel-rail contact information. Numerical simulation results for uncertain slippery rails verify the effectiveness of the proposed methodology.

Electromagnetic Navigational Bronchoscopy

PubMed Central

Port, Jeffrey; Harrison, Sebron

2013-01-01

Despite advances in technology and treatment options, lung cancer remains a deadly disease. National screening programs are being instituted in an attempt to discover lung cancer in high-risk individuals at an earlier stage. Such screening programs invariably discover small peripheral nodules that previously would not have been clinically apparent; the management of such lesions can be challenging. Current diagnostic options such as percutaneous biopsy are effective; however, they are hindered by their risk of morbidity such as pneumothorax. Electromagnetic bronchoscopy (ENB) is an emerging technology that allows the practitioner the ability to both sample and treat small peripheral pulmonary lesions. In experienced centers, ENB provides high rates of diagnostic yield for small lesions and a complication rate significantly lower than that of more conventional diagnostic modalities. Although there are current barriers to its widespread utilization (cost, specialized imaging, technical training), these obstacles will handled similarly to any other emerging technology and will likely not be long-term impediments to its use. PMID:24436528

`It's more flexible': persistence of women engineers in the academy

NASA Astrophysics Data System (ADS)

Mlambo, Yeukai Angela; Mabokela, Reitumetse Obakeng

2017-05-01

The under-representation of women in engineering is an issue of concern for policy-makers. While much of the existing literature has focussed on understanding reasons for women's under-representation in engineering and related technical fields, there is a paucity of research that examines why women who are already in engineering persist. This study aims to answer the question, why do women engineers in academe persist in a discipline that is generally perceived to be inhospitable to women. Three main challenges, namely gender discrimination, lack of institutional and disciplinary support, and the rigid nature of the workplace, emerged as key impediments to women engineers in the private sector. In contrast, women engineers in the academy identified the flexibility offered by academic environments, the presence of personal support networks, and a passion for teaching and students as critical factors that influenced their decision to remain in academia.

RNA Characterization by Solid-State NMR Spectroscopy.

PubMed

Yang, Yufei; Wang, Shenlin

2018-06-21

The structures of RNAs, which play critical roles in various biological processes, provide important clues and insights into the biological functions of these molecules. However, RNA structure determination remains a challenging topic. In recent years, magic-angle-spinning solid-state NMR (MAS SSNMR) has emerged as an alternative technique for structural and dynamic characterization of RNA. MAS SSNMR has been successfully applied to provide atomic-level structural information about several RNA molecules and RNA-protein complexes. In this Minireview, we give an overview of recent progress in the field of MAS SSNMR based RNA structural characterization, and introduce sample preparation strategies and SSNMR spectroscopic techniques that have been incorporated to identify RNA structural elements. We also highlight a few impressive examples of RNAs that have been investigated extensively by SSNMR. Finally, we briefly discuss future technical trends in the use of MAS SSNMR to facilitate RNA structure determination. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Technical note: Vitamin D-fortified Cheddar type cheese produced from concentrated milk.

PubMed

Boivin-Piché, Jonathan; Vuillemard, Jean-Christophe; St-Gelais, Daniel

2016-06-01

The technological challenge related to cheese fortification with vitamin D is the loss of a large proportion of vitamin D during the wheying-off step. The use of ultrafiltration (UF) to concentrate the milk before vitamin D enrichment and cheese manufacturing could be a way to reduce the volume of whey and consequently the vitamin D losses in cheese whey. Control (1.0×) and concentrated milks (1.4× and 1.8×) were fortified with vitamin D at a concentration of 450 IU per gram of milk. The 1.8× cheese milk concentration reduced slightly the vitamin D loss during the draining step (19.8%) compared with the control cheese (25.5%) and vitamin D remained stable during Cheddar cheese processing and ripening. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Proton radiography and tomography with application to proton therapy

PubMed Central

Allinson, N M; Evans, P M

2015-01-01

Proton radiography and tomography have long promised benefit for proton therapy. Their first suggestion was in the early 1960s and the first published proton radiographs and CT images appeared in the late 1960s and 1970s, respectively. More than just providing anatomical images, proton transmission imaging provides the potential for the more accurate estimation of stopping-power ratio inside a patient and hence improved treatment planning and verification. With the recent explosion in growth of clinical proton therapy facilities, the time is perhaps ripe for the imaging modality to come to the fore. Yet many technical challenges remain to be solved before proton CT scanners become commonplace in the clinic. Research and development in this field is currently more active than at any time with several prototype designs emerging. This review introduces the principles of proton radiography and tomography, their historical developments, the raft of modern prototype systems and the primary design issues. PMID:26043157

Pathways to Self-Sufficiency: Successful Entrepreneurship for Refugees

ERIC Educational Resources Information Center

Fong, Rowena; Busch, Noel Bridget; Armour, Marilyn; Heffron, Laurie Cook; Chanmugam, Amy

2007-01-01

This study examined the successes and challenges of refugee entrepreneurs by interviewing 50 refugees, service providers, and technical assistance providers. Qualitative data analyses revealed that successes and challenges occurred both at the individual and family levels as well as at the community and agency levels. The findings underscore the…

The "Virtual" Reality of High-Tech Training

ERIC Educational Resources Information Center

Justice, Jamie

2004-01-01

Community and technical colleges are at a crossroads in their history and mission in preparing individuals for the challenges of lifelong learning and the workforce of the future. Many industries are faced with the challenges of replacing an aging and retiring workforce, updating employee skill sets, and maintaining quality and production…

Challenges in Archetypes Terminology Binding Using SNOMED-CT Compositional Grammar: The Norwegian Patient Summary Case.

PubMed

Marco-Ruiz, Luis; Pedersen, Rune

2017-01-01

In order to cover the requirements for interoperability in the Norwegian context, we studied the terminology binding of archetypes to terminology expressions created with the SNOMED-CT compositional grammar. As a result we identified important challenges categorized as technical, expressivity, human, and models mismatch.

Shared Challenges and in a Networked Cultural Space.

ERIC Educational Resources Information Center

Greenstein, Daniel

This paper supplements a previous paper that reported on a tour of leading U.S. research libraries that are investing significantly in and have significant experience with innovative online collections and services. The previous paper reported the following five key challenges: architectural and technical; standards and best practices; strategies…

Autonomy, Interdependence, and Social Control: NASA and the Space Shuttle "Challenger."

ERIC Educational Resources Information Center

Vaughan, Diane

1990-01-01

Shows that the organizations responsible for regulating safety at the National Aeronautics and Space Administration (NASA) failed to identify flaws in management procedures and technical design that, if corrected, might have prevented the "Challenger" tragedy. Regulatory effectiveness was inhibited by the autonomy and interdependence of…

Information Superhighway: An Overview of Technology Challenges. Report to the Congress.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC.

This report focuses on the pivotal technical issues associated with the National Information Infrastructure program, security and privacy, interoperability, and reliability, and presents the General Accounting Office's findings on these challenges. It is reported that while the structures and services to be offered by the information superhighway…

The European Project Semester at ISEP: The Challenge of Educating Global Engineers

ERIC Educational Resources Information Center

Malheiro, Benedita; Silva, Manuel; Ribeiro, Maria Cristina; Guedes, Pedro; Ferreira, Paulo

2015-01-01

Current engineering education challenges require approaches that promote scientific, technical, design and complementary skills while fostering autonomy, innovation and responsibility. The European Project Semester (EPS) at Instituto Superior de Engenharia do Porto (ISEP) (EPS@ISEP) is a one semester project-based learning programme (30 European…

Experiences of New Information Technology Managers: A Qualitative Hermeneutic Phenomenological Study of IT Managers

ERIC Educational Resources Information Center

Snyder, Walter Wesley, V.

2012-01-01

Transitioning from a technical role to a managerial role has many challenges, particularly in information technology (IT) (Lester & Parnell, 2006). These challenges include people or soft skills, language skills, knowledge, intuition, mentoring, and delegation (Brokett, 2007; Feyerherm & Rice, 2002; Lester & Parnell, 2006). The IT…

48 CFR 227.7103-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... contracting officer shall not challenge a contractor's assertion that a commercial item, component, or process... to development of the item, component or process. (2) Presumption regarding development exclusively... validation of asserted restrictions for technical data related to commercial items, and to major systems, on...

48 CFR 227.7103-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... contracting officer shall not challenge a contractor's assertion that a commercial item, component, or process... to development of the item, component or process. (2) Presumption regarding development exclusively... validation of asserted restrictions for technical data related to commercial items, and to major systems, on...

48 CFR 227.7103-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... contracting officer shall not challenge a contractor's assertion that a commercial item, component, or process... to development of the item, component or process. (2) Presumption regarding development exclusively... validation of asserted restrictions for technical data related to commercial items, and to major systems, on...

48 CFR 227.7103-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... contracting officer shall not challenge a contractor's assertion that a commercial item, component, or process... to development of the item, component or process. (2) Presumption regarding development exclusively... validation of asserted restrictions for technical data related to commercial items, and to major systems, on...

Why primary care practices should become digital health information hubs for their patients.

PubMed

Baird, Aaron; Nowak, Samantha

2014-11-25

Two interesting health care trends are currently occurring: 1) patient-facing technologies, such as personal health records, patient portals, and mobile health apps, are being adopted at rapid rates, and 2) primary care, which includes family practice, is being promoted as essential to reducing health care costs and improving health care outcomes. While these trends are notable and commendable, both remain subject to significant fragmentation and incentive misalignments, which has resulted in significant data coordination and value generation challenges. In particular, patient-facing technologies designed to increase care coordination, often fall prey to the very digital fragmentation issues they are supposed to overcome. Additionally, primary care providers are treating patients that may have considerable health information histories, but generating a single view of such multi-source data is nearly impossible. We contribute to this debate by proposing that primary care practices become digital health information hubs for their patients. Such hubs would offer health data coordination in a medically professional setting with the benefits of expert, trustworthy advice coupled with active patient engagement. We acknowledge challenges including: costs, information quality and provenance, willingness-to-share information and records, willingness-to-use (by both providers and patients), primary care scope creep, and determinations of technical and process effectiveness. Even with such potential challenges, we strongly believe that more debate is needed on this topic prior to full implementation of various health information technology incentives and reform programs currently being designed and enacted throughout the world. Ultimately, if we do not provide a meaningful way for the full spectrum of health information to be used by both providers and patients, especially early in the health care continuum, effectively improving health outcomes may remain elusive. We view the primary care practice as a central component of digital information coordination, especially when considering the current challenges of digital health information fragmentation. Given these fragmentation issues and the emphasis on primary care as central to improving health and lower overall health care costs, we suggest that primary care practices should embrace their evolving role and should seek to become digital health information hubs for their patients.

Online faculty development for creating E-learning materials.

PubMed

Niebuhr, Virginia; Niebuhr, Bruce; Trumble, Julie; Urbani, Mary Jo

2014-01-01

Faculty who want to develop e-learning materials face pedagogical challenges of transforming instruction for the online environment, especially as many have never experienced online learning themselves. They face technical challenges of learning new software and time challenges of not all being able to be in the same place at the same time to learn these new skills. The objective of the Any Day Any Place Teaching (ADAPT) faculty development program was to create an online experience in which faculty could learn to produce e-learning materials. The ADAPT curriculum included units on instructional design, copyright principles and peer review, all for the online environment, and units on specific software tools. Participants experienced asynchronous and synchronous methods, including a learning management system, PC-based videoconferencing, online discussions, desktop sharing, an online toolbox and optional face-to-face labs. Project outcomes were e-learning materials developed and participants' evaluations of the experience. Likert scale responses for five instructional units (quantitative) were analyzed for distance from neutral using one-sample t-tests. Interview data (qualitative) were analyzed with assurance of data trustworthiness and thematic analysis techniques. Participants were 27 interprofessional faculty. They evaluated the program instruction as easy to access, engaging and logically presented. They reported increased confidence in new skills and increased awareness of copyright issues, yet continued to have time management challenges and remained uncomfortable about peer review. They produced 22 new instructional materials. Online faculty development methods are helpful for faculty learning to create e-learning materials. Recommendations are made to increase the success of such a faculty development program.

A review of design issues specific to hypersonic flight vehicles

NASA Astrophysics Data System (ADS)

Sziroczak, D.; Smith, H.

2016-07-01

This paper provides an overview of the current technical issues and challenges associated with the design of hypersonic vehicles. Two distinct classes of vehicles are reviewed; Hypersonic Transports and Space Launchers, their common features and differences are examined. After a brief historical overview, the paper takes a multi-disciplinary approach to these vehicles, discusses various design aspects, and technical challenges. Operational issues are explored, including mission profiles, current and predicted markets, in addition to environmental effects and human factors. Technological issues are also reviewed, focusing on the three major challenge areas associated with these vehicles: aerothermodynamics, propulsion, and structures. In addition, matters of reliability and maintainability are also presented. The paper also reviews the certification and flight testing of these vehicles from a global perspective. Finally the current stakeholders in the field of hypersonic flight are presented, summarizing the active programs and promising concepts.

Technical challenges in the construction of the steady-state stellarator Wendelstein 7-X

NASA Astrophysics Data System (ADS)

Bosch, H.-S.; Wolf, R. C.; Andreeva, T.; Baldzuhn, J.; Birus, D.; Bluhm, T.; Bräuer, T.; Braune, H.; Bykov, V.; Cardella, A.; Durodié, F.; Endler, M.; Erckmann, V.; Gantenbein, G.; Hartmann, D.; Hathiramani, D.; Heimann, P.; Heinemann, B.; Hennig, C.; Hirsch, M.; Holtum, D.; Jagielski, J.; Jelonnek, J.; Kasparek, W.; Klinger, T.; König, R.; Kornejew, P.; Kroiss, H.; Krom, J. G.; Kühner, G.; Laqua, H.; Laqua, H. P.; Lechte, C.; Lewerentz, M.; Maier, J.; McNeely, P.; Messiaen, A.; Michel, G.; Ongena, J.; Peacock, A.; Pedersen, T. S.; Riedl, R.; Riemann, H.; Rong, P.; Rust, N.; Schacht, J.; Schauer, F.; Schroeder, R.; Schweer, B.; Spring, A.; Stäbler, A.; Thumm, M.; Turkin, Y.; Wegener, L.; Werner, A.; Zhang, D.; Zilker, M.; Akijama, T.; Alzbutas, R.; Ascasibar, E.; Balden, M.; Banduch, M.; Baylard, Ch.; Behr, W.; Beidler, C.; Benndorf, A.; Bergmann, T.; Biedermann, C.; Bieg, B.; Biel, W.; Borchardt, M.; Borowitz, G.; Borsuk, V.; Bozhenkov, S.; Brakel, R.; Brand, H.; Brown, T.; Brucker, B.; Burhenn, R.; Buscher, K.-P.; Caldwell-Nichols, C.; Cappa, A.; Cardella, A.; Carls, A.; Carvalho, P.; Ciupiński, Ł.; Cole, M.; Collienne, J.; Czarnecka, A.; Czymek, G.; Dammertz, G.; Dhard, C. P.; Davydenko, V. I.; Dinklage, A.; Drevlak, M.; Drotziger, S.; Dudek, A.; Dumortier, P.; Dundulis, G.; Eeten, P. v.; Egorov, K.; Estrada, T.; Faugel, H.; Fellinger, J.; Feng, Y.; Fernandes, H.; Fietz, W. H.; Figacz, W.; Fischer, F.; Fontdecaba, J.; Freund, A.; Funaba, T.; Fünfgelder, H.; Galkowski, A.; Gates, D.; Giannone, L.; García Regaña, J. M.; Geiger, J.; Geißler, S.; Greuner, H.; Grahl, M.; Groß, S.; Grosman, A.; Grote, H.; Grulke, O.; Haas, M.; Haiduk, L.; Hartfuß, H.-J.; Harris, J. H.; Haus, D.; Hein, B.; Heitzenroeder, P.; Helander, P.; Heller, R.; Hidalgo, C.; Hildebrandt, D.; Höhnle, H.; Holtz, A.; Holzhauer, E.; Holzthüm, R.; Huber, A.; Hunger, H.; Hurd, F.; Ihrke, M.; Illy, S.; Ivanov, A.; Jablonski, S.; Jaksic, N.; Jakubowski, M.; Jaspers, R.; Jensen, H.; Jenzsch, H.; Kacmarczyk, J.; Kaliatk, T.; Kallmeyer, J.; Kamionka, U.; Karaleviciu, R.; Kern, S.; Keunecke, M.; Kleiber, R.; Knauer, J.; Koch, R.; Kocsis, G.; Könies, A.; Köppen, M.; Koslowski, R.; Koshurinov, J.; Krämer-Flecken, A.; Krampitz, R.; Kravtsov, Y.; Krychowiak, M.; Krzesinski, G.; Ksiazek, I.; Kubkowska, M.; Kus, A.; Langish, S.; Laube, R.; Laux, M.; Lazerson, S.; Lennartz, M.; Li, C.; Lietzow, R.; Lohs, A.; Lorenz, A.; Louche, F.; Lubyako, L.; Lumsdaine, A.; Lyssoivan, A.; Maaßberg, H.; Marek, P.; Martens, C.; Marushchenko, N.; Mayer, M.; Mendelevitch, B.; Mertens, Ph.; Mikkelsen, D.; Mishchenko, A.; Missal, B.; Mizuuchi, T.; Modrow, H.; Mönnich, T.; Morizaki, T.; Murakami, S.; Musielok, F.; Nagel, M.; Naujoks, D.; Neilson, H.; Neubauer, O.; Neuner, U.; Nocentini, R.; Noterdaeme, J.-M.; Nührenberg, C.; Obermayer, S.; Offermanns, G.; Oosterbeek, H.; Otte, M.; Panin, A.; Pap, M.; Paquay, S.; Pasch, E.; Peng, X.; Petrov, S.; Pilopp, D.; Pirsch, H.; Plaum, B.; Pompon, F.; Povilaitis, M.; Preinhaelter, J.; Prinz, O.; Purps, F.; Rajna, T.; Récsei, S.; Reiman, A.; Reiter, D.; Remmel, J.; Renard, S.; Rhode, V.; Riemann, J.; Rimkevicius, S.; Riße, K.; Rodatos, A.; Rodin, I.; Romé, M.; Roscher, H.-J.; Rummel, K.; Rummel, Th.; Runov, A.; Ryc, L.; Sachtleben, J.; Samartsev, A.; Sanchez, M.; Sano, F.; Scarabosio, A.; Schmid, M.; Schmitz, H.; Schmitz, O.; Schneider, M.; Schneider, W.; Scheibl, L.; Scholz, M.; Schröder, G.; Schröder, M.; Schruff, J.; Schumacher, H.; Shikhovtsev, I. V.; Shoji, M.; Siegl, G.; Skodzik, J.; Smirnow, M.; Speth, E.; Spong, D. A.; Stadler, R.; Sulek, Z.; Szabó, V.; Szabolics, T.; Szetefi, T.; Szökefalvi-Nagy, Z.; Tereshchenko, A.; Thomsen, H.; Thumm, M.; Timmermann, D.; Tittes, H.; Toi, K.; Tournianski, M.; Toussaint, U. v.; Tretter, J.; Tulipán, S.; Turba, P.; Uhlemann, R.; Urban, J.; Urbonavicius, E.; Urlings, P.; Valet, S.; Van Eester, D.; Van Schoor, M.; Vervier, M.; Viebke, H.; Vilbrandt, R.; Vrancken, M.; Wauters, T.; Weissgerber, M.; Weiß, E.; Weller, A.; Wendorf, J.; Wenzel, U.; Windisch, T.; Winkler, E.; Winkler, M.; Wolowski, J.; Wolters, J.; Wrochna, G.; Xanthopoulos, P.; Yamada, H.; Yokoyama, M.; Zacharias, D.; Zajac, J.; Zangl, G.; Zarnstorff, M.; Zeplien, H.; Zoletnik, S.; Zuin, M.

2013-12-01

The next step in the Wendelstein stellarator line is the large superconducting device Wendelstein 7-X, currently under construction in Greifswald, Germany. Steady-state operation is an intrinsic feature of stellarators, and one key element of the Wendelstein 7-X mission is to demonstrate steady-state operation under plasma conditions relevant for a fusion power plant. Steady-state operation of a fusion device, on the one hand, requires the implementation of special technologies, giving rise to technical challenges during the design, fabrication and assembly of such a device. On the other hand, also the physics development of steady-state operation at high plasma performance poses a challenge and careful preparation. The electron cyclotron resonance heating system, diagnostics, experiment control and data acquisition are prepared for plasma operation lasting 30 min. This requires many new technological approaches for plasma heating and diagnostics as well as new concepts for experiment control and data acquisition.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kovoor-Misra, S.

Technical organizations are not only vulnerable to crises, but have the potential to create catastrophic crises. This has been devastatingly illustrated by recent crises, such as the gas leak in Bhopal, India, the Exxon Valdez oil spill, and the Challenger explosion. Thus, crises preparation for these organizations. This paper describes a Multidimensional Approach to crisis preparation for technical organizations. As part of this approach, come critical factors for crisis preparation are also described. The Multidimensional Approach is derived from the literature and a study of the crisis preparation of nine technical organizations. 28 refs., 3 figs., 4 tab.

Technical Desiderata for the Integration of Genomic Data into Electronic Health Records

PubMed Central

Masys, Daniel R.; Jarvik, Gail P.; Abernethy, Neil F.; Anderson, Nicholas R.; Papanicolaou, George J.; Paltoo, Dina N.; Hoffman, Mark A.; Kohane, Isaac S.; Levy, Howard P.

2012-01-01

The era of “Personalized Medicine,” guided by individual molecular variation in DNA, RNA, expressed proteins and other forms of high volume molecular data brings new requirements and challenges to the design and implementation of Electronic Health Records (EHRs). In this article we describe the characteristics of biomolecular data that differentiate it from other classes of data commonly found in EHRs, enumerate a set of technical desiderata for its management in healthcare settings, and offer a candidate technical approach to its compact and efficient representation in operational systems. PMID:22223081

Experimental Null Method to Guide the Development of Technical Procedures and to Control False-Positive Discovery in Quantitative Proteomics.

PubMed

Shen, Xiaomeng; Hu, Qiang; Li, Jun; Wang, Jianmin; Qu, Jun

2015-10-02

Comprehensive and accurate evaluation of data quality and false-positive biomarker discovery is critical to direct the method development/optimization for quantitative proteomics, which nonetheless remains challenging largely due to the high complexity and unique features of proteomic data. Here we describe an experimental null (EN) method to address this need. Because the method experimentally measures the null distribution (either technical or biological replicates) using the same proteomic samples, the same procedures and the same batch as the case-vs-contol experiment, it correctly reflects the collective effects of technical variability (e.g., variation/bias in sample preparation, LC-MS analysis, and data processing) and project-specific features (e.g., characteristics of the proteome and biological variation) on the performances of quantitative analysis. To show a proof of concept, we employed the EN method to assess the quantitative accuracy and precision and the ability to quantify subtle ratio changes between groups using different experimental and data-processing approaches and in various cellular and tissue proteomes. It was found that choices of quantitative features, sample size, experimental design, data-processing strategies, and quality of chromatographic separation can profoundly affect quantitative precision and accuracy of label-free quantification. The EN method was also demonstrated as a practical tool to determine the optimal experimental parameters and rational ratio cutoff for reliable protein quantification in specific proteomic experiments, for example, to identify the necessary number of technical/biological replicates per group that affords sufficient power for discovery. Furthermore, we assessed the ability of EN method to estimate levels of false-positives in the discovery of altered proteins, using two concocted sample sets mimicking proteomic profiling using technical and biological replicates, respectively, where the true-positives/negatives are known and span a wide concentration range. It was observed that the EN method correctly reflects the null distribution in a proteomic system and accurately measures false altered proteins discovery rate (FADR). In summary, the EN method provides a straightforward, practical, and accurate alternative to statistics-based approaches for the development and evaluation of proteomic experiments and can be universally adapted to various types of quantitative techniques.

Communication and Collaboration in Library Technical Services: A Case Study of New York University in Abu Dhabi

ERIC Educational Resources Information Center

Parrott, Justin

2016-01-01

New York University Abu Dhabi Library has developed new strategies to increase efficiency in technical services processing between units based in New York and Abu Dhabi. This case study discusses the challenges specific to the international context and the methods used to overcome them, increase speed processing, and ultimately improve patron…

Vicarious Violence on the Screen: A Challenge to Educators and Families. Technical Assistance Bulletin No. 16. [Updated Version].

ERIC Educational Resources Information Center

Hepburn, Mary A.

This technical bulletin poses questions of concern to law-related educators (LRE) and citizenship educators working to reduce violence among students and the larger community. Maintaining that the sociological implications of violence on television and in video games should be a serious concern to all educators, the bulletin describes the…

78 FR 17871 - Changes To Implement the Technical Corrections to the Leahy-Smith America Invents Act as to Inter...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-25

... rule eliminates the nine-month ``dead zone'' for filing an inter partes review petition challenging a..., section 1(d) of the AIA Technical Corrections Act and this final rule eliminate the nine-month ``dead zone... the nine-month ``dead zone'' as to first-to-invent patents and reissue patents. Costs and Benefits...

Using Simplified English to Identify Potential Problems for Non-Native Speakers in the Language of Engineering Examination Papers

ERIC Educational Resources Information Center

Harrison, Sandra; Morgan, Roger

2012-01-01

There is an increasing sensitivity to the challenges posed by the language of examination papers and of instruction in scientific subjects, especially for non-native speakers of English. It has been observed that in addition to technical subject-specific vocabulary, non-technical words such as instructional verbs have been sources of difficulty,…

77 FR 53912 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; H-1B...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-04

... for OMB Review; Comment Request; H-1B Technical Skills Training Grants and H-1B Jobs and Innovation..., ``H-1B Technical Skills Training Grants and H-1B Jobs and Innovation Accelerator Challenge Grants,'' to the Office of Management and Budget (OMB) for review and approval for use in accordance with the...

Crafting a New Vision for High School: How States Can Join Academic and Technical Studies to Promote More Powerful Learning

ERIC Educational Resources Information Center

Bottoms, Gene; Young, Marna

2008-01-01

The authors advocate harnessing the applied teaching strategies of career/technical education (CTE) and infusing them into college-preparatory academics to transform secondary schools into high-performing centers of learning where students are both challenged and engaged. By pursuing this strategy, say the authors, states can help many more…

Curriculum Integration: Helping Career and Technical Education Students Truly Develop College and Career Readiness

ERIC Educational Resources Information Center

Park, Travis; Pearson, Donna; Richardson, George B.

2017-01-01

All students need to learn how to read, write, solve mathematics problems, and understand and apply scientific principles to succeed in college and/or careers. The challenges posed by entry-level career fields are no less daunting than those posed by college-level study. Thus, career and technical education students must learn effective math,…

Summaries of the Regional Conferences Held in Preparation for the Second International Congress on Technical and Vocational Education.

ERIC Educational Resources Information Center

UNEVOC Info, 1999

1999-01-01

In 1998, five regional conferences were held in preparation for the Second International Congress on Technical and Vocational Education (TVE). The Asia-Pacific regional conference focused on challenges of the 21st century, demands of the world of work, and changing patterns in the delivery of training programs. The European symposium covered five…

The PRO-TECH Program. A Program for Gifted and Talented High School Students in Connecticut's Vocational-Technical School System.

ERIC Educational Resources Information Center

Brann, Ronald E.

This document describes Connecticut's PRO-TECH Program, which is designed to link pupils in vocational-technical schools, resources of school and community, and opportunity for growth in order to teach advanced skills, explore new interests, challenge old ideas, and highlight individual talents. The document consists of sections on the following…

Separate and Unequal at Hillsborough High: A Principal's Challenges in Integrating "Academic" and Career and Technical Education Coursework

ERIC Educational Resources Information Center

Malin, Joel R.; Hackmann, Donald G.

2015-01-01

Dr. Edward White, Hillsborough High School principal, has decided to allocate faculty in-service time to address an unproductive chasm between academic and career and technical education programming within the school, which has created tensions among the faculty. On returning to his office after the professional development session, which was…

The Perkins Act of 2006: Connecting Career and Technical Education with the College and Career Readiness Agenda. Achieve Policy Brief

ERIC Educational Resources Information Center

Meeder, Hans

2008-01-01

Policymakers and educators around the nation are wrestling with an important challenge--how to raise expectations for high school achievement, while increasing relevance and engagement in learning to keep students in school. Career and technical education (CTE) is receiving renewed attention as a strategy for increasing school engagement and rigor…

1969 Proceedings of the Technical Information Advisory Committee...

ERIC Educational Resources Information Center

National Security Industrial Association, Washington, DC.

The meetings were set up to find ways to overcome the barriers that regulate or reduce the flow of scientific/Technical information and data to the user. Giving the user what he needs, when he needs it, and at a cost he can afford is the basic challenge faced by information services. Obtaining information depends on: (1) personal habits; (2)…

Towards Quality Technical Vocational Education and Training (Tvet) Programmes in Nigeria: Challenges and Improvement Strategies

ERIC Educational Resources Information Center

Ayonmike, Chinyere Shirley; Okwelle, P. Chijioke; Okeke, Benjamin Chukwumaijem

2015-01-01

Technical Vocational Education and Training (TVET) is widely recognized as a vital driving force for the socio-economic growth and technological development of nations. In achieving the goals and objectives of TVET in Nigeria, the quality of the programme needs to be improved and sustained. The purpose of this study is to ascertain the challenges…

Work Force Education: Beyond Technical Skills. Trends and Issues Alert No. 1.

ERIC Educational Resources Information Center

Imel, Susan

This brief suggests that during the past 2 decades, the skills needed to succeed in the workplace have changed significantly. Technical skills remain important, but, increasingly, employers recognize another category of skills crucial to a worker's ability to work "smarter, not harder." These "soft,""core,""nontechnical,""essential,""generic," and…

Evaluation of the Hanford 200 West Groundwater Treatment System: Fluidized Bed Bioreactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Looney, Brian B.; Jackson, Dennis G.; Dickson, John O.

A fluidized bed reactor (FBR) in the 200W water treatment facility at Hanford is removing nitrate from groundwater as part of the overall pump-treat-reinject process. Control of the FBR bed solids has proven challenging, impacting equipment, increasing operations and maintenance (O&M), and limiting the throughput of the facility. In response to the operational challenges, the Department of Energy Richland Office (DOE-RL) commissioned a technical assistance team to facilitate a system engineering evaluation and provide focused support recommendations to the Hanford Team. The DOE Environmental Management (EM) technical assistance process is structured to identify and triage technologies and strategies that addressmore » the target problem(s). The process encourages brainstorming and dialog and allows rapid identification and prioritization of possible options. Recognizing that continuous operation of a large-scale FBR is complex, requiring careful attention to system monitoring data and changing conditions, the technical assistance process focused on explicit identification of the available control parameters (“knobs”), how these parameters interact and impact the FBR system, and how these can be adjusted under different scenarios to achieve operational goals. The technical assistance triage process was performed in collaboration with the Hanford team.« less

The impact of age on the art of mammography and how to adapt accordingly.

PubMed

Lake, B; Cielecki, L; Williams, S; Worrall, C; Metelko, M

2017-11-01

Breast cancer is increasingly a disease of the elderly, and combined with the NHS Breast Screening Extension means that more elderly patients are having mammography. Increasing age can make mammography more technically difficult. This is a technical note detailing the results of a local audit which may be of interest due to potential service implications. A retrospective audit of the first year of screening extension of The Shropshire Breast Screening Programme. Aims to collect data on patient demographics and describe the technical adaptations developed in Shropshire. Breast screening extension has increased by 2.5 times the number of women aged 70-74 screened, and doubled the overall numbers of women over 70 screened. Significantly more older patients are being screened to present technical challenges to a screening programme. Data was obtained from a month of screening showed that 29% of patients over 70 needed extra time for positioning. Reasons included 22% difficulty in obtaining adequate positioning and 15% needed a relative to aid with consent. In the Shropshire screening programme different technical adaptations have been developed and are key to ensuring adequate images. These include double appointments, two radiographers, thorough assessment, steeper angles, seated examinations, from-below imaging and pre-planning for subsequent screen. Significantly more older women are having breast screening due to the increasing incidence of breast cancer and the Breast Screening Programme extension. Increasing age can significantly increase time taken for adequate imaging and present technical challenges. Development of technical adaptations to art of mammography is key to achieve adequate images. Copyright © 2017 The College of Radiographers. Published by Elsevier Ltd. All rights reserved.

The financial implications of endovascular aneurysm repair in the cost containment era.

PubMed

Stone, David H; Horvath, Alexander J; Goodney, Philip P; Rzucidlo, Eva M; Nolan, Brian W; Walsh, Daniel B; Zwolak, Robert M; Powell, Richard J

2014-02-01

Endovascular aneurysm repair (EVAR) is associated with significant direct device costs. Such costs place EVAR at odds with efforts to constrain healthcare expenditures. This study examines the procedure-associated costs and operating margins associated with EVAR at a tertiary care academic medical center. All infrarenal EVARs performed from April 2011 to March 2012 were identified (n = 127). Among this cohort, 49 patients met standard commercial instruction for use guidelines, were treated using a single manufacturer device, and billed to Medicare diagnosis-related group (DRG) 238. Of these 49 patients, net technical operating margins (technical revenue minus technical cost) were calculated in conjunction with the hospital finance department. EVAR implant costs were determined for each procedure. DRG 238-associated costs and length of stay were benchmarked against other academic medical centers using University Health System Consortium 2012 data. Among the studied EVAR cohort (age 75, 82% male, mean length of stay, 1.7 days), mean technical costs totaled $31,672. Graft implants accounted for 52% of the allocated technical costs. Institutional overhead was 17% ($5495) of total technical costs. Net mean total technical EVAR-associated operating margins were -$4015 per procedure. Our institutional costs and length of stay, when benchmarked against comparable centers, remained in the lowest quartile nationally using University Health System Consortium costs for DRG 238. Stent graft price did not correlate with total EVAR market share. EVAR is currently associated with significant negative operating margins among Medicare beneficiaries. Currently, device costs account for over 50% of EVAR-associated technical costs and did not impact EVAR market share, reflecting an unawareness of cost differential among surgeons. These data indicate that EVAR must undergo dramatic care delivery redesign for this practice to remain sustainable. Copyright © 2014 Society for Vascular Surgery. Published by Mosby, Inc. All rights reserved.

Technical Challenges of Enterprise Imaging: HIMSS-SIIM Collaborative White Paper.

PubMed

Clunie, David A; Dennison, Don K; Cram, Dawn; Persons, Kenneth R; Bronkalla, Mark D; Primo, Henri Rik

2016-10-01

This white paper explores the technical challenges and solutions for acquiring (capturing) and managing enterprise images, particularly those involving visible light applications. The types of acquisition devices used for various general-purpose photography and specialized applications including dermatology, endoscopy, and anatomic pathology are reviewed. The formats and standards used, and the associated metadata requirements and communication protocols for transfer and workflow are considered. Particular emphasis is placed on the importance of metadata capture in both order- and encounter-based workflow. The benefits of using DICOM to provide a standard means of recording and accessing both metadata and image and video data are considered, as is the role of IHE and FHIR.

Comparison of Traditional and Innovative Techniques to Solve Technical Challenges

NASA Technical Reports Server (NTRS)

Perchonok, Michele

2011-01-01

This slide presentation reviews the use of traditional and innovative techniques to solve technical challenges in food storage technology. The planning for a mission to Mars is underway, and the food storage technology improvements requires that improvements be made. This new technology is required, because current food storage technology is inadequate,refrigerators or freezers are not available for food preservation, and that a shelf life of 5 years is expected. A 10 year effort to improve food packaging technology has not enhanced significantly food packaging capabilities. Two innovation techniques were attempted InnoCentive and Yet2.com and have provided good results, and are still under due diligence for solver verification.

Epigenome-wide association studies for cancer biomarker discovery in circulating cell-free DNA: technical advances and challenges.

PubMed

Tanić, Miljana; Beck, Stephan

2017-02-01

Since introducing the concept of epigenome-wide association studies (EWAS) in 2011, there has been a vast increase in the number of published EWAS studies in common diseases, including in cancer. These studies have increased our understanding of epigenetic events underlying carcinogenesis and have enabled the discovery of cancer-specific methylation biomarkers. In this mini-review, we have focused on the state of the art in EWAS applied to cell-free circulating DNA for epigenetic biomarker discovery in cancer and discussed associated technical advances and challenges, and our expectations for the future of the field. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Centennial Challenges

NASA Image and Video Library

2010-02-26

NASA Administrator Charles Bolden, right, and Doug Comstock, left, stand with David Masten, of Masten Space Systems, during a ceremony for winners and participants of NASA’s 2009 Centennial Challenges, Friday, Feb. 26, 2010, at NASA Headquarters in Washington. The year-long competition addresses a range of technical challenges that support NASA's missions in aeronautics and space with a goal of encouraging novel solutions from non-traditional sources. Photo Credit: (NASA/Paul E. Alers)

SIMBIOS Project

NASA Technical Reports Server (NTRS)

Fargion, Giulietta S.; McClain, Charles R.; Busalacchi, Antonio J. (Technical Monitor)

2001-01-01

The purpose of this technical report is to provide current documentation of the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) Project activities, NASA Research Announcement (NRAI) research status, satellite data processing, data product validation, and field calibration. This documentation is necessary to ensure that critical information is related to the scientific community and NASA management. This critical information includes the technical difficulties and challenges of validating and combining ocean color data from an array of independent satellite systems to form consistent and accurate global bio-optical time series products. This technical report is not meant as a substitute for scientific literature. Instead, it will provide a ready and responsive vehicle for the multitude of technical reports issued by an operational project.

Documentation as Problem Solving for Literacy Outreach Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

2004-07-06

Age-appropriate technical writing lessons for underperforming high-school students can offer them an innovative, ''authentic'' way to improve how they read and write. Thus the techniques and principles of effective technical communication routinely applied at work also provide a positive response to one of today's great educational challenges. This workshop shows participants how to (1) introduce English and science teachers to the value of technical writing as a response to school literacy problems, (2) prepare plausible practice exercises to help students improve their basic literacy, and (3) recognize and respond to known literacy outreach pitfalls. Every effective literacy outreach project basedmore » on technical writing needs to address four key problems.« less

Assessing Technical Competence in Surgical Trainees: A Systematic Review.

PubMed

Szasz, Peter; Louridas, Marisa; Harris, Kenneth A; Aggarwal, Rajesh; Grantcharov, Teodor P

2015-06-01

To systematically examine the literature describing the methods by which technical competence is assessed in surgical trainees. The last decade has witnessed an evolution away from time-based surgical education. In response, governing bodies worldwide have implemented competency-based education paradigms. The definition of competence, however, remains elusive, and the impact of these education initiatives in terms of assessment methods remains unclear. A systematic review examining the methods by which technical competence is assessed was conducted by searching MEDLINE, EMBASE, PsychINFO, and the Cochrane database of systematic reviews. Abstracts of retrieved studies were reviewed and those meeting inclusion criteria were selected for full review. Data were retrieved in a systematic manner, the validity and reliability of the assessment methods was evaluated, and quality was assessed using the Grading of Recommendations Assessment, Development and Evaluation classification. Of the 6814 studies identified, 85 studies involving 2369 surgical residents were included in this review. The methods used to assess technical competence were categorized into 5 groups; Likert scales (37), benchmarks (31), binary outcomes (11), novel tools (4), and surrogate outcomes (2). Their validity and reliability were mostly previously established. The overall Grading of Recommendations Assessment, Development and Evaluation for randomized controlled trials was high and low for the observational studies. The definition of technical competence continues to be debated within the medical literature. The methods used to evaluate technical competence predominantly include instruments that were originally created to assess technical skill. Very few studies identify standard setting approaches that differentiate competent versus noncompetent performers; subsequently, this has been identified as an area with great research potential.