Space shuttle I-tube radiator testing at Johnson Space Center, May 1976, volume 1

NASA Technical Reports Server (NTRS)

Scheps, P. B.

1976-01-01

During the two weeks of thermal vacuum testing a representative forward panel was successfully operated in a variety of simulated environmental conditions. Performance limits for both high and low load operations were established. Confidence in the stable operation of the panel throughout its typical operating range was verified by the testing, and design studies were conducted to analyze the effects of the payload bay door, and the panel deployment angle, on performance.

Practical Applications of a Space Station

NASA Technical Reports Server (NTRS)

1984-01-01

The potential uses of a special station for civil and commercial applications is examined. Five panels of experts representing user-oriented communities, and a sixth panel which dealth with system design considerations, based their studies on the assumption that the station would be a large platform, capable of housing a wide array of diverse instruments, and could be either manned or unmanned. The Earth's Resources Panel dealt with applications of remote sensing for resource assessment. The Earth's Environment Panel dealt with the Earth's atmosphere and its impact on society. The Ocean Operations Panel looked at both science and applications. The Satellite Communications Panel assessed the potential role of a space station in the evolution of commercial telecommunication services up to the year 2000. The Materials Science and Engineering panel focused on the utility of a space station environment for materials processing.

Imputation of single nucleotide polymorhpism genotypes of Hereford cattle: reference panel size, family relationship and population structure

USDA-ARS?s Scientific Manuscript database

The objective of this study is to investigate single nucleotide polymorphism (SNP) genotypes imputation of Hereford cattle. Purebred Herefords were from two sources, Line 1 Hereford (N=240) and representatives of Industry Herefords (N=311). Using different reference panels of 62 and 494 males with 1...

Assessing foliar ascorbate content in the rice diversity panel 1

USDA-ARS?s Scientific Manuscript database

Early spring plantings of rice can have poor stands due to cold temperatures. Our previous studies have shown that high vitamin C (ascorbate AsA) Arabidopsis lines are tolerant to cold stress. The rice diversity panel 1 (RDP1) represents the genetic diversity of Oryza sativa and has been extensively...

New SRB Data

Atmospheric Science Data Center

2013-08-06

... from the GEWEX Radiation Panel (now the GEWEX Data and Assessment Panel - GDAP) received at the 2011 meeting. The panel stressed the need for algorithm names to more accurately represent the parameterized ...

Flutter Research on Skin Panels

NASA Technical Reports Server (NTRS)

Kordes, Eldon E.; Tuovila, Weimer J.; Guy, Lawrence D.

1960-01-01

Representative experimental results are presented to show the current status of the panel flutter problem. Results are presented for unstiffened rectangular panels and for rectangular panels stiffened by corrugated backing. Flutter boundaries are established for all types of panels when considered on the basis of equivalent isotropic plates. The effects of Mach number, differential pressure, and aerodynamic heating on panel flutter are discussed. A flutter analysis of orthotropic panels is presented in the appendix.

Prototypical Recombinant Multi-Protease-Inhibitor-Resistant Infectious Molecular Clones of Human Immunodeficiency Virus Type 1

PubMed Central

Varghese, Vici; Mitsuya, Yumi; Fessel, W. Jeffrey; Liu, Tommy F.; Melikian, George L.; Katzenstein, David A.; Schiffer, Celia A.; Holmes, Susan P.

2013-01-01

The many genetic manifestations of HIV-1 protease inhibitor (PI) resistance present challenges to research into the mechanisms of PI resistance and the assessment of new PIs. To address these challenges, we created a panel of recombinant multi-PI-resistant infectious molecular clones designed to represent the spectrum of clinically relevant multi-PI-resistant viruses. To assess the representativeness of this panel, we examined the sequences of the panel's viruses in the context of a correlation network of PI resistance amino acid substitutions in sequences from more than 10,000 patients. The panel of recombinant infectious molecular clones comprised 29 of 41 study-defined PI resistance amino acid substitutions and 23 of the 27 tightest amino acid substitution clusters. Based on their phenotypic properties, the clones were classified into four groups with increasing cross-resistance to the PIs most commonly used for salvage therapy: lopinavir (LPV), tipranavir (TPV), and darunavir (DRV). The panel of recombinant infectious molecular clones has been made available without restriction through the NIH AIDS Research and Reference Reagent Program. The public availability of the panel makes it possible to compare the inhibitory activities of different PIs with one another. The diversity of the panel and the high-level PI resistance of its clones suggest that investigational PIs active against the clones in this panel will retain antiviral activity against most if not all clinically relevant PI-resistant viruses. PMID:23796938

Precast concrete sandwich panels subjected to impact loading

NASA Astrophysics Data System (ADS)

Runge, Matthew W.

Precast concrete sandwich panels are a relatively new product in the construction industry. The design of these panels incorporates properties that allow for great resilience against temperature fluctuation as well as the very rapid and precise construction of facilities. The concrete sandwich panels investigated in this study represent the second generation of an ongoing research and development project. This second generation of panels have been engineered to construct midsized commercial buildings up to three stories in height as well as residential dwellings. The panels consist of a double-tee structural wythe, a foam core and a fascia wythe, joined by shear connectors. Structures constructed from these panels may be subjected to extreme loading including the effects of seismic and blast loading in addition to wind. The aim of this work was to investigate the behaviour of this particular sandwich panel when subjected to structural impact events. The experimental program consisted of fourteen concrete sandwich panels, five of which were considered full-sized specimens (2700 mm X 1200mm X 270 mm) and nine half-sized specimens (2700mm X 600mm X 270 mm) The panels were subjected to impact loads from a pendulum impact hammer where the total energy applied to the panels was varied by changing the mass of the hammer. The applied loads, displacements, accelerations, and strains at the mid-span of the panel as well as the reaction point forces were monitored during the impact. The behaviour of the panels was determined primarily from the experimental results. The applied loads at low energy levels that caused little to no residual deflection as well as the applied loads at high energy levels that represent catastrophic events and thus caused immediate failure were determined from an impact on the structural and the fascia wythes. Applied loads at intermediate energy levels representing extreme events were also used to determine whether or not the panels could withstand multiple impacts. It was shown that panels impacted on the fascia wythe are capable of withstanding multiple impacts of energy levels in excess of 16 000 J while panels that were impacted on the structural wythe are capable of resisting a single impact delivering an energy level of 10 000 J or multiple impacts from an energy level of 5 000 J. A Single Degree of Freedom (SDOF) model was developed to predict the maximum deflection of the panels and it provided a good approximation of the deflection observed during the experimental program. A high degree of composite action between the two wythes was determined to exist from the results of high speed video imaging and through SDOF modelling.

A modelling approach for the vibroacoustic behaviour of aluminium extrusions used in railway vehicles

NASA Astrophysics Data System (ADS)

Xie, G.; Thompson, D. J.; Jones, C. J. C.

2006-06-01

Modern railway vehicles are often constructed from double walled aluminium extrusions, which give a stiff, light construction. However, the acoustic performance of such panels is less satisfactory, with the airborne sound transmission being considerably worse than the mass law for the equivalent simple panel. To compensate for this, vehicle manufacturers are forced to add treatments such as damping layers, absorptive layers and floating floors. Moreover, a model for extruded panels that is both simple and reliable is required to assist in the early stages of design. An statistical energy analysis (SEA) model to predict the vibroacoustic behaviour of aluminium extrusions is presented here. An extruded panel is represented by a single global mode subsystem and three subsystems representing local modes of the various strips which occur for frequencies typically above 500 Hz. An approximate model for the modal density of extruded panels is developed and this is verified using an FE model. The coupling between global and local modes is approximated with the coupling between a travelling global wave and uncorrelated local waves. This model enables the response difference across the panels to be predicted. For the coupling with air, the average radiation efficiency of a baffled extruded panel is modelled in terms of the contributions from global and local modes. Experimental studies of a sample extruded panel have also been carried out. The vibration of an extruded panel under mechanical excitation is measured for various force positions and the vibration distribution over the panel is obtained in detail. The radiation efficiencies of a free extruded panel have also been measured. The complete SEA model of a panel is finally used to predict the response of the extruded panel under mechanical and acoustic excitations. Especially for mechanical excitation, the proposed SEA model gives a good prediction compared with the measurement results.

What Happens When Persons Leave Welfare: Data from the SIPP Panel File.

ERIC Educational Resources Information Center

Lamas, Enrique; McNeil, John

This document reports on a study of the likelihood of individuals participating in the Federal food stamp program and the Medicaid program and the likelihood of exiting those programs. Data were analyzed from the first panel file of the Survey of Income and Program Participation (SIPP). Special problems with representativeness and measurement…

On an integro-differential equation model for the study of the response of an acoustically coupled panel

NASA Technical Reports Server (NTRS)

Yen, D. H. Y.; Maestrello, L.; Padula, S.

1975-01-01

The response of a clamped panel to supersonically convected turbulence is considered. A theoretical model in the form of an integro-differential equation is employed that takes into account the coupling between the panel motion and the surrounding acoustic medium. The kernels of the integrals, which represent induced pressures due to the panel motion, are Green's functions for sound radiations under various moving and stationary sources. An approximate analysis is made by following a finite-element Ritz-Galerkin procedure. Preliminary numerical results, in agreement with experimental findings, indicate that the acoustic damping is the controlling mechanism of the response.

A Patch Density Recommendation based on Convergence Studies for Vehicle Panel Vibration Response resulting from Excitation by a Diffuse Acoustic Field

NASA Technical Reports Server (NTRS)

Smith, Andrew; LaVerde, Bruce; Jones, Douglas; Towner, Robert; Waldon, James; Hunt, Ron

2013-01-01

Producing fluid structural interaction estimates of panel vibration from an applied pressure field excitation are quite dependent on the spatial correlation of the pressure field. There is a danger of either over estimating a low frequency response or under predicting broad band panel response in the more modally dense bands if the pressure field spatial correlation is not accounted for adequately. It is a useful practice to simulate the spatial correlation of the applied pressure field over a 2d surface using a matrix of small patch area regions on a finite element model (FEM). Use of a fitted function for the spatial correlation between patch centers can result in an error if the choice of patch density is not fine enough to represent the more continuous spatial correlation function throughout the intended frequency range of interest. Several patch density assumptions to approximate the fitted spatial correlation function are first evaluated using both qualitative and quantitative illustrations. The actual response of a typical vehicle panel system FEM is then examined in a convergence study where the patch density assumptions are varied over the same model. The convergence study results illustrate the impacts possible from a poor choice of patch density on the analytical response estimate. The fitted correlation function used in this study represents a diffuse acoustic field (DAF) excitation of the panel to produce vibration response.

75 FR 8190 - Art Advisory Panel of the Commissioner of Internal Revenue Service

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-23

... function, Panel records and discussions must include tax return information. Therefore, the Panel meetings... balanced between museum directors and curators, art dealers and auction representatives to afford differing...

50 CFR 600.756 - Conduct and operation of a fishery negotiation panel.

Code of Federal Regulations, 2010 CFR

2010-10-01

... negotiation panel. 600.756 Section 600.756 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT... Fishery Negotiation Panels § 600.756 Conduct and operation of a fishery negotiation panel. (a) Roles and... represent the Council or NMFS in the discussions and negotiations of the FNP. ...

50 CFR 600.756 - Conduct and operation of a fishery negotiation panel.

Code of Federal Regulations, 2011 CFR

2011-10-01

... negotiation panel. 600.756 Section 600.756 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT... Fishery Negotiation Panels § 600.756 Conduct and operation of a fishery negotiation panel. (a) Roles and... represent the Council or NMFS in the discussions and negotiations of the FNP. ...

50 CFR 600.756 - Conduct and operation of a fishery negotiation panel.

Code of Federal Regulations, 2013 CFR

2013-10-01

... negotiation panel. 600.756 Section 600.756 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT... Fishery Negotiation Panels § 600.756 Conduct and operation of a fishery negotiation panel. (a) Roles and... represent the Council or NMFS in the discussions and negotiations of the FNP. ...

50 CFR 600.756 - Conduct and operation of a fishery negotiation panel.

Code of Federal Regulations, 2012 CFR

2012-10-01

... negotiation panel. 600.756 Section 600.756 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT... Fishery Negotiation Panels § 600.756 Conduct and operation of a fishery negotiation panel. (a) Roles and... represent the Council or NMFS in the discussions and negotiations of the FNP. ...

50 CFR 600.756 - Conduct and operation of a fishery negotiation panel.

Code of Federal Regulations, 2014 CFR

2014-10-01

... negotiation panel. 600.756 Section 600.756 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT... Fishery Negotiation Panels § 600.756 Conduct and operation of a fishery negotiation panel. (a) Roles and... represent the Council or NMFS in the discussions and negotiations of the FNP. ...

Differential sensitivity of polyhydroxyalkanoate producing bacteria to fermentation inhibitors and comparison of polyhydroxybutyrate production from Burkholderia cepacia and Pseudomonas pseudoflava

Treesearch

Diane Dietrich; Barbara Illman; Casey Crooks

2013-01-01

The aim of this study is determine the relative sensitivity of a panel of seven polyhydroxyalkanoate producing bacteria to a panel of seven lignocellulosic-derived fermentation inhibitors representing aliphatic acids, furans and phenolics. A further aim was to measure the polyhydroxybutyrate production of select organisms on lignocellulosic-derived monosaccharides...

Genome-Wide Association Mapping Reveals Multiple QTLs Governing Tolerance Response for Seedling Stage Chilling Stress in Indica Rice.

PubMed

Pandit, Elssa; Tasleem, Swaleha; Barik, Saumya R; Mohanty, Durga P; Nayak, Deepak K; Mohanty, Shakti P; Das, Sujata; Pradhan, Sharat K

2017-01-01

Rice crop is sensitive to cold stress at seedling stage. A panel of population representing 304 shortlisted germplasm lines was studied for seedling stage chilling tolerance in indica rice. Six phenotypic classes were exposed to six low temperature stress regimes under control phenotyping facility to investigate response pattern. A panel of 66 genotypes representing all phenotypic classes was used for ensuring genetic diversity, population structure and association mapping for the trait using 58 simple sequence repeat (SSR) and 2 direct trait linked markers. A moderate level of genetic diversity was detected in the panel population for the trait. Deviation of Hardy-Weinberg's expectation was detected in the studied population using Wright's F statistic. The panel showed 30% variation among population and 70% among individuals. The entire population was categorized into three sub-populations through STRUCTURE analysis. This revealed tolerance for the trait had a common primary ancestor for each sub-population with few admix individuals. The panel population showed the presence of many QTLs for cold stress tolerance in the individuals representing like genome-wide expression of the trait. Nineteen SSR markers were significantly associated at chilling stress of 8°C to 4°C for 7-21 days duration. Thus, the primers linked to the seedling stage cold tolerance QTLs namely qCTS9, qCTS-2, qCTS6.1, qSCT2, qSCT11, qSCT1a, qCTS-3.1, qCTS11.1, qCTS12.1, qCTS-1b, and CTB2 need to be pyramided for development of strongly chilling tolerant variety.

Genome-Wide Association Mapping Reveals Multiple QTLs Governing Tolerance Response for Seedling Stage Chilling Stress in Indica Rice

PubMed Central

Pandit, Elssa; Tasleem, Swaleha; Barik, Saumya R.; Mohanty, Durga P.; Nayak, Deepak K.; Mohanty, Shakti P.; Das, Sujata; Pradhan, Sharat K.

2017-01-01

Rice crop is sensitive to cold stress at seedling stage. A panel of population representing 304 shortlisted germplasm lines was studied for seedling stage chilling tolerance in indica rice. Six phenotypic classes were exposed to six low temperature stress regimes under control phenotyping facility to investigate response pattern. A panel of 66 genotypes representing all phenotypic classes was used for ensuring genetic diversity, population structure and association mapping for the trait using 58 simple sequence repeat (SSR) and 2 direct trait linked markers. A moderate level of genetic diversity was detected in the panel population for the trait. Deviation of Hardy-Weinberg's expectation was detected in the studied population using Wright's F statistic. The panel showed 30% variation among population and 70% among individuals. The entire population was categorized into three sub-populations through STRUCTURE analysis. This revealed tolerance for the trait had a common primary ancestor for each sub-population with few admix individuals. The panel population showed the presence of many QTLs for cold stress tolerance in the individuals representing like genome-wide expression of the trait. Nineteen SSR markers were significantly associated at chilling stress of 8°C to 4°C for 7–21 days duration. Thus, the primers linked to the seedling stage cold tolerance QTLs namely qCTS9, qCTS-2, qCTS6.1, qSCT2, qSCT11, qSCT1a, qCTS-3.1, qCTS11.1, qCTS12.1, qCTS-1b, and CTB2 need to be pyramided for development of strongly chilling tolerant variety. PMID:28487705

Fracture Mechanics Analyses of the Slip-Side Joggle Regions of Wing-Leading Edge Panels

NASA Technical Reports Server (NTRS)

Raju, Ivatury S.; Knight, Norman F., Jr.; Song, Kyongchan; Phillips, Dawn R.

2010-01-01

The Space Shuttle Orbiter wing comprises of 22 leading edge panels on each side of the wing. These panels are part of the thermal protection system that protects the Orbiter wings from extreme heating that take place on the reentry in to the earth atmosphere. On some panels that experience extreme heating, liberation of silicon carbon (SiC) coating was observed on the slip side regions of the panels. Global structural and local fracture mechanics analyses were performed on these panels as a part of the root cause investigation of this coating liberation anomaly. The wing-leading-edge reinforced carbon-carbon (RCC) panels, Panel 9, T-seal 10, and Panel 10, are shown in Figure 1 and the progression of the stress analysis models is presented in Figure 2. The global structural analyses showed minimal interaction between adjacent panels and the T-seal that bridges the gap between the panels. A bounding uniform temperature is applied to a representative panel and the resulting stress distribution is examined. For this loading condition, the interlaminar normal stresses showed negligible variation in the chord direction and increased values in the vicinity of the slip-side joggle shoulder. As such, a representative span wise slice on the panel can be taken and the cross section can be analyzed using plane strain analysis.

View of Kotov working with Debris Panels during EVA18

NASA Image and Video Library

2007-05-30

ISS015-E-10043 (30 May 2007) --- Cosmonaut Oleg V. Kotov, Expedition 15 flight engineer representing Russia's Federal Space Agency, wearing a Russian Orlan spacesuit, participates in a session of extravehicular activity (EVA). Among other tasks, Kotov and cosmonaut Fyodor N. Yurchikhin (out of frame), commander representing Russia's Federal Space Agency, retrieved the "Christmas tree" bundle of three packages of 17 protective debris panels for installation around the forward cone of the Zvezda Service Module of the International Space Station and to install the first set of those panels. The aluminum debris protection panels are designed to shield the module from micro-meteoroids.

Bio-Inspired Sensing and Display of Polarization Imagery

DTIC Science & Technology

2005-07-17

and weighting coefficients in this example. Panel 4D clearly shows a better visibility, feature extraction , and lesser effect from the background...of linear polarization. Panel E represents the segmentation of the degree of linear polarization, and then Panel F shows the extracted segment with...polarization, and Panel F shows the segment extraction with the finger print selected. Panel G illustrates the application of Canny edge detection to

Evaluating Multiple Imputation Models for the Southern Annual Forest Inventory

Treesearch

Gregory A. Reams; Joseph M. McCollum

1999-01-01

The USDA Forest Service's Southern Research Station is implementing an annualized forest survey in thirteen states. The sample design is a systematic sample of five interpenetrating grids (panels), where each panel is measured sequentially. For example, panel one information is collected in year one, and panel five in year five. The area representative and time...

78 FR 65660 - Medicare Program; Solicitation of Five Nominations to the Advisory Panel on Hospital Outpatient...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... Payment (HOP, the Panel). There are five vacancies on the Panel effective September 30, 2013. The purpose... services. The Secretary rechartered the Panel in 2012 for a 2-year period effective through November [email protected] or call (410) 786-3985. News Media: Representatives should contact the CMS Press Office at...

Variable-intercept panel model for deformation zoning of a super-high arch dam.

PubMed

Shi, Zhongwen; Gu, Chongshi; Qin, Dong

2016-01-01

This study determines dam deformation similarity indexes based on an analysis of deformation zoning features and panel data clustering theory, with comprehensive consideration to the actual deformation law of super-high arch dams and the spatial-temporal features of dam deformation. Measurement methods of these indexes are studied. Based on the established deformation similarity criteria, the principle used to determine the number of dam deformation zones is constructed through entropy weight method. This study proposes the deformation zoning method for super-high arch dams and the implementation steps, analyzes the effect of special influencing factors of different dam zones on the deformation, introduces dummy variables that represent the special effect of dam deformation, and establishes a variable-intercept panel model for deformation zoning of super-high arch dams. Based on different patterns of the special effect in the variable-intercept panel model, two panel analysis models were established to monitor fixed and random effects of dam deformation. Hausman test method of model selection and model effectiveness assessment method are discussed. Finally, the effectiveness of established models is verified through a case study.

Identifying Training Needs to Improve Indigenous Community Representatives Input into Environmental Resource Management Consultative Processes: A Case Study of the Bundjalung Nation

ERIC Educational Resources Information Center

Lloyd, David; Norrie, Fiona

2004-01-01

Despite increased engagement of Indigenous representatives as participants on consultative panels charged with processes of natural resource management, concerns have been raised by both Indigenous representatives and management agencies regarding the ability of Indigenous people to have quality input into the decisions these processes produce. In…

Military Education: Implementation of Recommendations at the Armed Forces Staff College. Report to the Chairman, Panel on Military Education, Committee on Armed Services, House of Representatives.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. National Security and International Affairs Div.

This study evaluates the Armed Forces Staff College's implementation of selected recommendations from the April 1989 report of the Panel on Military Education. In particular, this report discusses Phase II officer professional military education (PME) programs taught at the Joint and Combined Staff Officer School in Norfolk, Virginia. The study…

Air Force Personalized Medicine Program Panel: Representative Research at the 59th Medical Wing San Antonio Military Medical Center

DTIC Science & Technology

2016-05-18

and treatment strategies at the San Antonio Military Health System. Panel members will describe studies in Disease Management providing evidence for...Application in a Clinical CBA: AFMSand MAJCOM Needs (Research Knowledge) Setti g Optimization of Pharmacologic Cardiovascular Personalized Care...Medicine Research Program Development of Human Mesenchymal Stem Cells for Treatment of Immune System Dysregulation in Neurological & other Diseases

A Mesh Refinement Study on the Impact Response of a Shuttle Leading-Edge Panel Finite Element Simulation

NASA Technical Reports Server (NTRS)

Fasanella, Edwin L.; Jackson, Karen E.; Lyle, Karen H.; Spellman, Regina L.

2006-01-01

A study was performed to examine the influence of varying mesh density on an LS-DYNA simulation of a rectangular-shaped foam projectile impacting the space shuttle leading edge Panel 6. The shuttle leading-edge panels are fabricated of reinforced carbon-carbon (RCC) material. During the study, nine cases were executed with all possible combinations of coarse, baseline, and fine meshes of the foam and panel. For each simulation, the same material properties and impact conditions were specified and only the mesh density was varied. In the baseline model, the shell elements representing the RCC panel are approximately 0.2-in. on edge, whereas the foam elements are about 0.5-in. on edge. The element nominal edge-length for the baseline panel was halved to create a fine panel (0.1-in. edge length) mesh and doubled to create a coarse panel (0.4-in. edge length) mesh. In addition, the element nominal edge-length of the baseline foam projectile was halved (0.25-in. edge length) to create a fine foam mesh and doubled (1.0-in. edge length) to create a coarse foam mesh. The initial impact velocity of the foam was 775 ft/s. The simulations were executed in LS-DYNA for 6 ms of simulation time. Contour plots of resultant panel displacement and effective stress in the foam were compared at four discrete time intervals. Also, time-history responses of internal and kinetic energy of the panel, kinetic and hourglass energy of the foam, and resultant contact force were plotted to determine the influence of mesh density.

Finite Element Modeling of the Buckling Response of Sandwich Panels

NASA Technical Reports Server (NTRS)

Rose, Cheryl A.; Moore, David F.; Knight, Norman F., Jr.; Rankin, Charles C.

2002-01-01

A comparative study of different modeling approaches for predicting sandwich panel buckling response is described. The study considers sandwich panels with anisotropic face sheets and a very thick core. Results from conventional analytical solutions for sandwich panel overall buckling and face-sheet-wrinkling type modes are compared with solutions obtained using different finite element modeling approaches. Finite element solutions are obtained using layered shell element models, with and without transverse shear flexibility, layered shell/solid element models, with shell elements for the face sheets and solid elements for the core, and sandwich models using a recently developed specialty sandwich element. Convergence characteristics of the shell/solid and sandwich element modeling approaches with respect to in-plane and through-the-thickness discretization, are demonstrated. Results of the study indicate that the specialty sandwich element provides an accurate and effective modeling approach for predicting both overall and localized sandwich panel buckling response. Furthermore, results indicate that anisotropy of the face sheets, along with the ratio of principle elastic moduli, affect the buckling response and these effects may not be represented accurately by analytical solutions. Modeling recommendations are also provided.

Space Exploration Initiative Fuels, Materials and Related Nuclear Propulsion Technologies Panel

NASA Technical Reports Server (NTRS)

Bhattacharyya, S. K.; Olsen, C.; Cooper, R.; Matthews, R. B.; Walter, C.; Titran, R. J.

1993-01-01

This report was prepared by members of the Fuels, Materials and Related Technologies Panel, with assistance from a number of industry observers as well as laboratory colleagues of the panel members. It represents a consensus view of the panel members. This report was not subjected to a thorough review by DOE, NASA or DoD, and the opinions expressed should not be construed to represent the official position of these organizations, individually or jointly. Topics addressed include: requirement for fuels and materials development for nuclear thermal propulsion (NTP) and nuclear electric propulsion (NEP); overview of proposed concepts; fuels technology development plan; materials technology development plan; other reactor technology development; and fuels and materials requirements for advanced propulsion concepts.

Prediction of sound transmission loss through multilayered panels by using Gaussian distribution of directional incident energy

PubMed

Kang; Ih; Kim; Kim

2000-03-01

In this study, a new prediction method is suggested for sound transmission loss (STL) of multilayered panels of infinite extent. Conventional methods such as random or field incidence approach often given significant discrepancies in predicting STL of multilayered panels when compared with the experiments. In this paper, appropriate directional distributions of incident energy to predict the STL of multilayered panels are proposed. In order to find a weighting function to represent the directional distribution of incident energy on the wall in a reverberation chamber, numerical simulations by using a ray-tracing technique are carried out. Simulation results reveal that the directional distribution can be approximately expressed by the Gaussian distribution function in terms of the angle of incidence. The Gaussian function is applied to predict the STL of various multilayered panel configurations as well as single panels. The compared results between the measurement and the prediction show good agreements, which validate the proposed Gaussian function approach.

Implementation of a panel of service users for the evaluation of mental health outpatient services.

PubMed

Perreault, Michel; Renaud, Jeff; Bourassa, Francine; Beauchesne, Louise; Mpiana, André; Bernier, Sylvain; Milton, Diana

2010-12-01

The purpose of this study is to describe the experience of a standing panel of psychiatric outpatients over a period of five years. The procedure is used as a complementary method to assess client satisfaction regarding services provided by a Montreal psychiatric institute. During this period, 13 meetings were held, involving a total of 22 patients as active members of the panel. These sessions allowed 11 decision makers of the institute to consult the panel regarding various topics such as service organization, quality of services, and client information. In a context of internal evaluation, by giving direct and rapid access to service users' perspectives on key issues regarding service provision, the panel appeared to be a practical procedure for use in complement with other satisfaction assessment methods. Unplanned effects included the recruitment of participants as patient representatives on different hospital committees and associations, and as presenters in conferences and congresses.

Employment Training Panel Report to the Legislature.

ERIC Educational Resources Information Center

California State Employment Training Panel, Sacramento.

The Employment Training Panel consists of seven representatives of business and labor who were appointed by the Governor of California and the state's legislature to administer funds transferred from the state unemployment insurance fund for job training. The panel is authorized to contract with employers and schools to conduct training that puts…

Outgassing tests on iras solar panel samples

NASA Technical Reports Server (NTRS)

Premat, G.; Zwaal, A.; Pennings, N. H.

1980-01-01

Several outgassing tests were carried out on representative solar panel samples in order to determine the extent of contamination that could be expected from this source. The materials for the construction of the solar panels were selected as a result of contamination obtained in micro volatile condensable materials tests.

41 CFR 50-203.16 - Industry panel meetings.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 41 Public Contracts and Property Management 1 2013-07-01 2013-07-01 false Industry panel meetings... Under the Walsh-Healey Public Contracts Act § 50-203.16 Industry panel meetings. The Secretary of Labor may, within his discretion, invite representatives of employers and employees in an industry to meet...

41 CFR 50-203.16 - Industry panel meetings.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 41 Public Contracts and Property Management 1 2011-07-01 2009-07-01 true Industry panel meetings... Under the Walsh-Healey Public Contracts Act § 50-203.16 Industry panel meetings. The Secretary of Labor may, within his discretion, invite representatives of employers and employees in an industry to meet...

41 CFR 50-203.16 - Industry panel meetings.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 41 Public Contracts and Property Management 1 2014-07-01 2014-07-01 false Industry panel meetings... Under the Walsh-Healey Public Contracts Act § 50-203.16 Industry panel meetings. The Secretary of Labor may, within his discretion, invite representatives of employers and employees in an industry to meet...

41 CFR 50-203.16 - Industry panel meetings.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 41 Public Contracts and Property Management 1 2012-07-01 2009-07-01 true Industry panel meetings... Under the Walsh-Healey Public Contracts Act § 50-203.16 Industry panel meetings. The Secretary of Labor may, within his discretion, invite representatives of employers and employees in an industry to meet...

41 CFR 50-203.16 - Industry panel meetings.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true Industry panel meetings... Under the Walsh-Healey Public Contracts Act § 50-203.16 Industry panel meetings. The Secretary of Labor may, within his discretion, invite representatives of employers and employees in an industry to meet...

Assembly And Initial Characterization Of A Panel Of 85 Genomically Validated Cell Lines From Diverse Head And Neck Tumor Sites

PubMed Central

Zhao, Mei; Sano, Daisuke; Pickering, Curtis R.; Jasser, Samar A.; Henderson, Ying C.; Clayman, Gary L.; Sturgis, Erich M.; Ow, Thomas J.; Lotan, Reuben; Carey, Thomas E.; Sacks, Peter G.; Grandis, Jennifer R.; Sidransky, David; Heldin, Nils Erik; Myers, Jeffrey N.

2011-01-01

Purpose Human cell lines are useful for studying cancer biology and pre-clinically modeling cancer therapy, but can be misidentified and cross contamination is unfortunately common. The purpose of this study was to develop a panel of validated head and neck cell lines representing the spectrum of tissue sites and histologies that could be used for studying the molecular, genetic, and phenotypic diversity of head and neck cancer. Methods A panel of 122 clinically and phenotypically diverse head and neck cell lines from head and neck squamous cell carcinoma (HNSCC), thyroid cancer, cutaneous squamous cell carcinoma, adenoid cystic carcinoma, oral leukoplakia, immortalized primary keratinocytes, and normal epithelium, was assembled from the collections of several individuals and institutions. Authenticity was verified by performing short tandem repeat (STR) analysis. Human papillomavirus (HPV) status and cell morphology were also determined. Results Eighty-five of the 122 cell lines had unique genetic profiles. HPV-16 DNA was detected in 2 cell lines. These 85 cell lines included cell lines from the major head and neck primary tumor sites, and close examination demonstrates a wide range of in vitro phenotypes. Conclusion This panel of 85 genomically validated head and neck cell lines represents a valuable resource for the head and neck cancer research community that can help advance understanding of the disease by providing a standard reference for cell lines that can be utilized for biological as well as preclinical studies. PMID:21868764

Recommendations for the clinical evaluation of agents for treatment of osteoporosis: consensus of an expert panel representing the American Society for Bone and Mineral Research (ASBMR), the International Society for Clinical Densitometry (ISCD), and the National Osteoporosis Foundation (NOF).

PubMed

Silverman, Stuart L; Cummings, Steven R; Watts, Nelson B

2008-01-01

A panel of experts representing ASBMR, NOF, and ISCD reviewed evidence and reached consensus that regulatory approval of treatments for osteoporosis should be based on trials with fracture endpoints, lasting 18-24 mo, and extending treatment to 5 yr; other indications could be approved based on BMD and turnover markers. In response to an FDA request for clinical trial guidance in osteoporosis, an expert panel was convened with representatives from the American Society of Bone and Mineral Research, the International Society of Clinical Densitometry, and the National Osteoporosis Foundation. The panel used a validated evidence-based expert panel process (the Rand Appropriateness Method) to address issues of trial duration, trial design, use of intermediate endpoints as outcomes, and use of placebo-controlled trials in high-risk patients. The panel concluded that placebo-controlled trials with fracture endpoints are appropriate and, with informed consent, are ethical for registration of new compounds. Trials may be 18-24 mo in duration for efficacy, assuming longer duration to 5 yr for safety and demonstration of sustained fracture reduction. Once fracture efficacy has been established for a particular agent, intermediate endpoints (e.g., BMD and bone turnover markers) may be used as outcomes for new indications other than corticosteroid-induced osteoporosis.

Medication dispensing errors in Palestinian community pharmacy practice: a formal consensus using the Delphi technique.

PubMed

Shawahna, Ramzi; Haddad, Aseel; Khawaja, Baraa; Raie, Rand; Zaneen, Sireen; Edais, Tasneem

2016-10-01

Background Medication dispensing errors (MDEs) are frequent in community pharmacy practice. A definition of MDEs and scenarios representing MDE situations in Palestinian community pharmacy practice were not previously approached using formal consensus techniques. Objective This study was conducted to achieve consensus on a definition of MDEs and a wide range of scenarios that should or should not be considered as MDEs in Palestinian community pharmacy practice by a panel of community pharmacists. Setting Community pharmacy practice in Palestine. Method This was a descriptive study using the Delphi technique. A panel of fifty community pharmacists was recruited from different geographical locations of the West Bank of Palestine. A three round Delphi technique was followed to achieve consensus on a proposed definition of MDEs and 83 different scenarios representing potential MDEs using a nine-point scale. Main outcome measure Agreement or disagreement of a panel of community pharmacists on a proposed definition of MDEs and a series of scenarios representing potential MDEs. Results In the first Delphi round, views of key contact community pharmacists on MDEs were explored and situations representing potential MDEs were collected. In the second Delphi round, consensus was achieved to accept the proposed definition and to include 49 (59 %) of the 83 proposed scenarios as MDEs. In the third Delphi round, consensus was achieved to include further 13 (15.7 %) scenarios as MDEs, exclude 9 (10.8 %) scenarios and the rest of 12 (14.5 %) scenarios were considered equivocal based on the opinions of the panelists. Conclusion Consensus on a definition of MDEs and scenarios representing MDE situations in Palestinian community pharmacy practice was achieved using a formal consensus technique. The use of consensual definitions and scenarios representing MDE situations in community pharmacy practice might minimize methodological variations and their significant effects on the number and rate of MDEs reported in different studies.

Optimization of Blended Wing Body Composite Panels Using Both NASTRAN and Genetic Algorithm

NASA Technical Reports Server (NTRS)

Lovejoy, Andrew E.

2006-01-01

The blended wing body (BWB) is a concept that has been investigated for improving the performance of transport aircraft. A trade study was conducted by evaluating four regions from a BWB design characterized by three fuselage bays and a 400,000 lb. gross take-off weight (GTW). This report describes the structural optimization of these regions via computational analysis and compares them to the baseline designs of the same construction. The identified regions were simplified for use in the optimization. The regions were represented by flat panels having appropriate classical boundary conditions and uniform force resultants along the panel edges. Panel-edge tractions and internal pressure values applied during the study were those determined by nonlinear NASTRAN analyses. Only one load case was considered in the optimization analysis for each panel region. Optimization was accomplished using both NASTRAN solution 200 and Genetic Algorithm (GA), with constraints imposed on stress, buckling, and minimum thicknesses. The NASTRAN optimization analyses often resulted in infeasible solutions due to violation of the constraints, whereas the GA enforced satisfaction of the constraints and, therefore, always ensured a feasible solution. However, both optimization methods encountered difficulties when the number of design variables was increased. In general, the optimized panels weighed less than the comparable baseline panels.

Family Formation Processes: Assessing the Need for a New Nationally Representative Household Panel Survey in the United States

PubMed Central

Manning, Wendy D.

2015-01-01

The American family has undergone rapid transformation. Careful measurement attention to family formation is important because families are at the heart of numerous decisions, roles, and responsibilities with implications for understanding the well-being of families, adults and children. This paper considers whether there is a need for a new household panel study that addresses family formation. This paper consists of a review of the recent body of population-based, American surveys and finds a considerable gap in the ability to study the implications of families for the health and well-being of Americans. Earlier panel surveys used to assess family life anchored questions around marital events, but changes in family patterns require attention to a more diverse set of family forms. The paper concludes with recommendations for a multi-purpose panel study. The key challenge is to keep to pace with complexity and changes in American family life while at the same time maintaining a parsimonious set of survey questions. PMID:26612969

Library Service to Industry; Series of Four Workshops.

ERIC Educational Resources Information Center

California State Library, Sacramento.

Library services to industry was the theme of four workshops held in Fresno, Altadena, Palos Verdes and Sacramento during March 1969. The composition of the panel at each workshop and the procedure for each panel presentation were basically the same. Each panel had a representative from industry and four practicing librarians: a public librarian,…

Establishing research priorities for patient safety in emergency medicine: a multidisciplinary consensus panel.

PubMed

Plint, Amy C; Stang, Antonia S; Calder, Lisa A

2015-01-01

Patient safety in the context of emergency medicine is a relatively new field of study. To date, no broad research agenda for patient safety in emergency medicine has been established. The objective of this study was to establish patient safety-related research priorities for emergency medicine. These priorities would provide a foundation for high-quality research, important direction to both researchers and health-care funders, and an essential step in improving health-care safety and patient outcomes in the high-risk emergency department (ED) setting. A four-phase consensus procedure with a multidisciplinary expert panel was organized to identify, assess, and agree on research priorities for patient safety in emergency medicine. The 19-member panel consisted of clinicians, administrators, and researchers from adult and pediatric emergency medicine, patient safety, pharmacy, and mental health; as well as representatives from patient safety organizations. In phase 1, we developed an initial list of potential research priorities by electronically surveying a purposeful and convenience sample of patient safety experts, ED clinicians, administrators, and researchers from across North America using contact lists from multiple organizations. We used simple content analysis to remove duplication and categorize the research priorities identified by survey respondents. Our expert panel reached consensus on a final list of research priorities through an in-person meeting (phase 3) and two rounds of a modified Delphi process (phases 2 and 4). After phases 1 and 2, 66 unique research priorities were identified for expert panel review. At the end of phase 4, consensus was reached for 15 research priorities. These priorities represent four themes: (1) methods to identify patient safety issues (five priorities), (2) understanding human and environmental factors related to patient safety (four priorities), (3) the patient perspective (one priority), and (4) interventions for improving patient safety (five priorities). This study established expert, consensus-based research priorities for patient safety in emergency medicine. This framework could be used by researchers and health-care funders and represents an essential guiding step towards enhancing quality of care and patient safety in the ED.

Fabrication and evaluation of advanced titanium structural panels for supersonic cruise aircraft

NASA Technical Reports Server (NTRS)

Payne, L.

1977-01-01

Flightworthy primary structural panels were designed, fabricated, and tested to investigate two advanced fabrication methods for titanium alloys. Skin-stringer panels fabricated using the weldbraze process, and honeycomb-core sandwich panels fabricated using a diffusion bonding process, were designed to replace an existing integrally stiffened shear panel on the upper wing surface of the NASA YF-12 research aircraft. The investigation included ground testing and Mach 3 flight testing of full-scale panels, and laboratory testing of representative structural element specimens. Test results obtained on full-scale panels and structural element specimens indicate that both of the fabrication methods investigated are suitable for primary structural applications on future civil and military supersonic cruise aircraft.

NIMH/NIH Consensus Development Conference statement. Mood disorders: pharmacologic prevention of recurrences. Consensus Development Panel.

PubMed

1985-04-01

This report represents the consensus of a panel of representatives from psychiatry, psychology, pharmacology, epidemiology, internal medicine, and the general public regarding the use of pharmacologic agents to prevent recurrences of mood disorders. The panel concluded that recurrent mood disorders, which have a high prevalence and serious consequences, are underdiagnosed and undertreated. Applying appropriate strategies to the management and use of pharmacologic agents will enhance the likelihood of compliance and the prevention of recurrence with a minimum of bothersome side effects. Such strategies should be used within the context of a supportive relationship among doctor, patient, and family.

Regulatory decision with EPA/NRC/DOE/State Session (Panel)

DOE Office of Scientific and Technical Information (OSTI.GOV)

O`Donnell, E.

1995-12-31

This panel will cover the Nuclear Regulatory Commission`s (NRC) proposed radiation limits in the Branch Technical Position on Low-Level Radioactive Waste Performance Assessment and the Environmental Protection Agency`s (EPA) draft regulation in Part 193. Representatives from NRC and EPA will discuss the inconsistencies in these two regulations. DOE and state representatives will discuss their perspective on how these regulations will affect low-level radioactive waste performance assessments.

Catastrophic Health Insurance: The Tennessee Perspective. Hearing before the Subcommittee on Health and Long-Term Care of the Select Committee on Aging. House of Representatives, Ninety-Ninth Congress, Second Session (Chattanooga, Tennessee).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Select Committee on Aging.

This document contains witnesses' testimonies and prepared statements from the Congressional hearing held in Chattanooga, Tennessee to gain that state's perspective on catastrophic health insurance. Opening statements are included from Representatives Marilyn Lloyd and Claude Pepper. Two panels of witnesses provide testimony. The first panel,…

Sound transmission through a double panel structure periodically coupled with vibration insulators

NASA Astrophysics Data System (ADS)

Legault, Julien; Atalla, Noureddine

2010-07-01

In this paper, sound transmission through an aircraft sidewall representative double panel structure is investigated theoretically and parametric and validation studies are conducted. The studied configuration is composed of a trim panel (receiver side panel) attached to a ribbed skin panel (source side panel) with periodically spaced resilient mounts. The structure is considered infinite in order to use space harmonic expansion. The partition is also assumed planar for simplicity. The model allows for a 3D incident field and the panels can be metallic and/or composite. A four-pole formulation is employed for modeling of the mounts and the absorption provided by the fiberglass that fills the cavity between the leaves is addressed with an equivalent fluid model. The investigation of mount stiffness, damping and spacing show that properly designed mounts can increase the TL significantly (up to 20 dB of difference between rigid and resilient mounts). However, they can create undesirable resonances resulting from their interaction with the panels. The influence of cavity absorption is also studied and results illustrate the fact that it is not worth investing in a highly absorbent fiber if the structure-borne transmission path is not adequately insulated, and likewise that it is not worth investing in highly resilient mounts without sufficient cavity absorption. Moreover, the investigation of panel damping confirms that when structure-borne transmission is present, raising skin damping can increase the TL even below coincidence, but that on average, greater improvements are achieved by raising trim damping. Finally, comparison between the periodic model and finite element simulations for structure-borne transmission shows that the average level of transmitted energy is well reproduced with the periodic approach. However, the modes are only captured approximately due to the assumption of an infinite structure.

Comprehensive List of Cancer-Related Genetic Variations of the NCI-60 Panel | Center for Cancer Research

Cancer.gov

The NCI-60 cell lines are the most frequently studied human tumor cell lines in cancer research. The panel of cell lines represents nine different types of cancer: breast, ovary, prostate, colon, lung, kidney, brain, leukemia, and melanoma. Originally developed to screen anticancer compounds by the NCI Developmental Therapeutics Program (DTP), the NCI-60 panel has generated the most extensive cancer pharmacology database worldwide. The 60 cell lines have also been extensively analyzed for their gene and microRNA expression levels, DNA mutation status, and DNA copy number variations. These findings have provided the groundwork for research centered on increasing our understanding of tumor biology and drug activity.

The Influence of Clocking Angle of the Projectile on the Simulated Impact Response of a Shuttle Leading Edge Wing Panel

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fasanella, Edwin L.; Lyle, Karen H.; Spellman, Regina L.

2005-01-01

An analytical study was conducted to determine the influence of clocking angle of a foam projectile impacting a space shuttle leading edge wing panel. Four simulations were performed using LS-DYNA. The leading edge panels are fabricated of multiple layers of reinforced carbon-carbon (RCC) material. The RCC material was represented using Mat 58, which is a material property that can be used for laminated composite fabrics. Simulations were performed of a rectangular-shaped foam block, weighing 0.23-lb., impacting RCC Panel 9 on the top surface. The material properties of the foam were input using Mat 83. The impact velocity was 1,000 ft/s along the Orbiter X-axis. In two models, the foam impacted on a corner, in one model the foam impacted the panel initially on the 2-in.-long edge, and in the last model the foam impacted the panel on the 7-in.- long edge. The simulation results are presented as contour plots of first principal infinitesimal strain and time history plots of contact force and internal and kinetic energy of the foam and RCC panel.

Lung cancer signature biomarkers: tissue specific semantic similarity based clustering of digital differential display (DDD) data.

PubMed

Srivastava, Mousami; Khurana, Pankaj; Sugadev, Ragumani

2012-11-02

The tissue-specific Unigene Sets derived from more than one million expressed sequence tags (ESTs) in the NCBI, GenBank database offers a platform for identifying significantly and differentially expressed tissue-specific genes by in-silico methods. Digital differential display (DDD) rapidly creates transcription profiles based on EST comparisons and numerically calculates, as a fraction of the pool of ESTs, the relative sequence abundance of known and novel genes. However, the process of identifying the most likely tissue for a specific disease in which to search for candidate genes from the pool of differentially expressed genes remains difficult. Therefore, we have used 'Gene Ontology semantic similarity score' to measure the GO similarity between gene products of lung tissue-specific candidate genes from control (normal) and disease (cancer) sets. This semantic similarity score matrix based on hierarchical clustering represents in the form of a dendrogram. The dendrogram cluster stability was assessed by multiple bootstrapping. Multiple bootstrapping also computes a p-value for each cluster and corrects the bias of the bootstrap probability. Subsequent hierarchical clustering by the multiple bootstrapping method (α = 0.95) identified seven clusters. The comparative, as well as subtractive, approach revealed a set of 38 biomarkers comprising four distinct lung cancer signature biomarker clusters (panel 1-4). Further gene enrichment analysis of the four panels revealed that each panel represents a set of lung cancer linked metastasis diagnostic biomarkers (panel 1), chemotherapy/drug resistance biomarkers (panel 2), hypoxia regulated biomarkers (panel 3) and lung extra cellular matrix biomarkers (panel 4). Expression analysis reveals that hypoxia induced lung cancer related biomarkers (panel 3), HIF and its modulating proteins (TGM2, CSNK1A1, CTNNA1, NAMPT/Visfatin, TNFRSF1A, ETS1, SRC-1, FN1, APLP2, DMBT1/SAG, AIB1 and AZIN1) are significantly down regulated. All down regulated genes in this panel were highly up regulated in most other types of cancers. These panels of proteins may represent signature biomarkers for lung cancer and will aid in lung cancer diagnosis and disease monitoring as well as in the prediction of responses to therapeutics.

Expert panels as a reference standard in orthodontic research: An assessment of published methods and reporting.

PubMed

Lempesi, Evangelia; Toulia, Electra; Pandis, Nikolaos

2017-04-01

The aim of this study was to investigate the expert panel methodology applied in orthodontics and its reporting quality. Additionally, the relationship between the reporting quality and a range of variables was explored. PubMed was searched for orthodontic studies in which the final diagnosis or assessment was made by 2 or more experts published up to March 16, 2015. Reporting quality assessment was conducted using an established modified checklist. The relationship between potential predictors and the total score was assessed using univariable linear regression. We identified 237 studies with a mean score of 9.97 (SD, 1.12) out of a maximum of 15. Critical information about panel methodology was missing in all studies. The panel composition differed substantially across studies, ranging from 2 to 646 panel members, with large variations in the expertise represented. Only 17 studies (7.2%) reported sample size calculations to justify the panel size. Panel members were partly blinded in 65 (27.4%) studies. Most studies failed to report which statistic was used to compute intrarater (65.8%) and interrater (66.2%) agreements. Journal type (nonorthodontic: β, 0.23; 95% CI, -0.07 to 0.54 compared with orthodontic), publication year (β, 0; 95% CI, -0.02 to 0.02 for each additional year), number of authors (1-3: β, 0.30; 95% CI, -0.13 to 0.74 compared with at least 6; 4-5: β, 0.18; 95% CI, -0.29 to 0.33 compared with at least 6), and number of centers involved (single: β, 0.20; 95% CI, -0.14 to 0.54 compared with multicenter) were not significant predictors of improved reporting. Studies published in Asia and Australia had significantly lower scores compared with those published in Europe (β, -0.54; 95% CI, -0.92 to -0.17). Formal guidelines on methodology and reporting of studies involving expert panels are required. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Recruiting and retaining youth and young adults: challenges and opportunities in survey research for tobacco control.

PubMed

Cantrell, Jennifer; Hair, Elizabeth C; Smith, Alexandria; Bennett, Morgane; Rath, Jessica Miller; Thomas, Randall K; Fahimi, Mansour; Dennis, J Michael; Vallone, Donna

2018-03-01

Evaluation studies of population-based tobacco control interventions often rely on large-scale survey data from numerous respondents across many geographic areas to provide evidence of their effectiveness. Significant challenges for survey research have emerged with the evolving communications landscape, particularly for surveying hard-to-reach populations such as youth and young adults. This study combines the comprehensive coverage of an address-based sampling (ABS) frame with the timeliness of online data collection to develop a nationally representative longitudinal cohort of young people aged 15-21. We constructed an ABS frame, partially supplemented with auxiliary data, to recruit this hard-to-reach sample. Branded and tested mail-based recruitment materials were designed to bring respondents online for screening, consent and surveying. Once enrolled, respondents completed online surveys every 6 months via computer, tablet or smartphone. Numerous strategies were utilized to enhance retention and representativeness RESULTS: Results detail sample performance, representativeness and retention rates as well as device utilization trends for survey completion among youth and young adult respondents. Panel development efforts resulted in a large, nationally representative sample with high retention rates. This study is among the first to employ this hybrid ABS-to-online methodology to recruit and retain youth and young adults in a probability-based online cohort panel. The approach is particularly valuable for conducting research among younger populations as it capitalizes on their increasing access to and comfort with digital communication. We discuss challenges and opportunities of panel recruitment and retention methods in an effort to provide valuable information for tobacco control researchers seeking to obtain representative, population-based samples of youth and young adults in the U.S. as well as across the globe. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Management of Hypoparathyroidism: Summary Statement and Guidelines.

PubMed

Brandi, Maria Luisa; Bilezikian, John P; Shoback, Dolores; Bouillon, Roger; Clarke, Bart L; Thakker, Rajesh V; Khan, Aliya A; Potts, John T

2016-06-01

Hypoparathyroidism is a rare disorder characterized by hypocalcemia and absent or deficient PTH. This report presents a summary of current information about epidemiology, presentation, diagnosis, clinical features, and management and proposes guidelines to help clinicians diagnose, evaluate, and manage this disorder. Participants in the First International Conference on the Management of Hypoparathyroidism represented a worldwide constituency with acknowledged interest and expertise in key basic, translational, and clinical aspects of hypoparathyroidism. Three Workshop Panels were constituted to address questions for presentation and discussion at the Conference held in Florence, Italy, May 7-9, 2015. At that time, a series of presentations were made, followed by in-depth discussions in an open forum. Each Workshop Panel also met in closed sessions to formulate the three evidence-based reports that accompany this summary statement. An Expert Panel then considered this information, developed summaries, guidelines, and a research agenda that constitutes this summary statement. Preceding the conference, each Workshop Panel conducted an extensive literature search as noted in the individual manuscripts accompanying this report. All presentations were based upon the best peer-reviewed information taking into account the historical and current literature. This report represents the Expert Panel's synthesis of the conference material placed in a context designed to be relevant to clinicians and those engaged in cutting-edge studies of hypoparathyroidism. This document not only provides a summary of our current knowledge but also places recent advances in its management into a context that should enhance future advances in our understanding of hypoparathyroidism.

Cryogenic performance of slotted brazed Rene 41 honeycomb panels

NASA Technical Reports Server (NTRS)

Hepler, A. K.; Swegle, A. R.

1982-01-01

Two brazed Rene 41 honeycomb panels that would incorporate a frame element were designed, fabricated and tested. The panels were representative of the lower surface of an advanced space transportation vehicle. The first panel was a two span panel supported by a center frame and on edges parallel to it. The second panel was a two span panel supported by a center frame and on edges parallel to it. The second panel was a three span panel supported on two frames and on edges parallel to the frames. Each panel had its outer skin slotted to reduce the thermal stresses of the panel skins. The first panel was tested under simulated boost conditions that included liquid hydrogen exposure of the frame and inner skin and radiant heat to 478K on the outer skins. The first panel was tested to investigate the effect of thermal stresses in skins and core caused by the panel being restrained by a cold integral frame and to observe the effects of frost formation and possible liquid air development in and around outer skin slots.

Non-Discriminatory Psychological Assessment of the Handicapped.

ERIC Educational Resources Information Center

Phelps, William R.

In 1979 the National Research Council established a panel to study testing of handicapped people for selection and placement purposes in educational and employment settings. The study involved the review of relevant literature, solicitation of pertinent information from organizations representing handicapped persons and from professionals involved…

Laser Ablation Cleaning of Self-Reacting Friction Stir Weld Seam Surfaces: A Preliminary Evaluation

NASA Technical Reports Server (NTRS)

Nunes, A. C., Jr.; Russell, C. K.; Brooke, S. A.; Parry, Q.; Lowrey, N. M.

2014-01-01

Anodized aluminum panels were cleaned by three lasers at three separate sites with a view to determining whether more economical laser cleaning might supplant current manual cleaning methods for preparation of surfaces to be welded by the self-reacting friction stir process. Uncleaned panels yielded welds exhibiting residual oxide defect (ROD) and failing at very low stresses along the trace of the weld seam. Manually cleaned panels yielded welds without ROD; these welds failed at nominal stress levels along an angled fracture surface not following the weld seam trace. Laser cleaned panels yielded welds failing at intermediate stress levels. The inadequacy of the laser cleaning processes leaves questions: Was the anodized aluminum test too stringent to represent actual cleaning requirements? Were the wrong laser cleaning techniques/parameters used for the study? Is the laser cleaning mechanism inadequate for effective preweld surface cleaning?

A procedure for sensory detection of androstenone in meat and meat products from entire male pigs: Development of a panel training.

PubMed

Garrido, Mª Dolores; Egea, Macarena; Linares, Mª Belén; Martínez, Beatriz; Viera, Ceferina; Rubio, Begoña; Borrisser-Pairó, Francesc

2016-12-01

This study represents a proposal for training sensory panels in androstenone (AND) perception in meat and meat products. The procedure consists of four main parts: (1) selection and training of a sensory panel (11 panelists) using standards with Vaseline oil media as carriers of AND and skatole (SKA); (2) developing a training method AND detection in meat; (3) dry cured meat product and (4) cooked meat product. All candidates were able to distinguish between AND, SKA and AND+SKA in Vaseline oil, order AND solutions with different concentrations and classify them in the three categories: low, medium and high. The panel was able to differentiate the meat in the three categories, but only the high level in meat products. Due to the individual features in AND perception, specific training for each type of product is required. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Influence of Mesh Density on the Impact Response of a Shuttle Leading-Edge Panel Finite Element Simulation

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fasanella, Edwin L.; Lyle, Karen H.; Spellman, Regina L.

2004-01-01

A study was performed to examine the influence of varying mesh density on an LS-DYNA simulation of a rectangular-shaped foam projectile impacting the space shuttle leading edge Panel 6. The shuttle leading-edge panels are fabricated of reinforced carbon-carbon (RCC) material. During the study, nine cases were executed with all possible combinations of coarse, baseline, and fine meshes of the foam and panel. For each simulation, the same material properties and impact conditions were specified and only the mesh density was varied. In the baseline model, the shell elements representing the RCC panel are approximately 0.2-in. on edge, whereas the foam elements are about 0.5-in. on edge. The element nominal edge-length for the baseline panel was halved to create a fine panel (0.1-in. edge length) mesh and doubled to create a coarse panel (0.4-in. edge length) mesh. In addition, the element nominal edge-length of the baseline foam projectile was halved (0.25-in. edge length) to create a fine foam mesh and doubled (1.0- in. edge length) to create a coarse foam mesh. The initial impact velocity of the foam was 775 ft/s. The simulations were executed in LS-DYNA version 960 for 6 ms of simulation time. Contour plots of resultant panel displacement and effective stress in the foam were compared at five discrete time intervals. Also, time-history responses of internal and kinetic energy of the panel, kinetic and hourglass energy of the foam, and resultant contact force were plotted to determine the influence of mesh density. As a final comparison, the model with a fine panel and fine foam mesh was executed with slightly different material properties for the RCC. For this model, the average degraded properties of the RCC were replaced with the maximum degraded properties. Similar comparisons of panel and foam responses were made for the average and maximum degraded models.

Design and commission of an experimental test rig to apply a full-scale pressure load on composite sandwich panels representative of an aircraft secondary structure

NASA Astrophysics Data System (ADS)

Crump, D. A.; Dulieu-Barton, J. M.; Savage, J.

2010-01-01

This paper describes the design of a test rig, which is used to apply a representative pressure load to a full-scale composite sandwich secondary aircraft structure. A generic panel was designed with features to represent those in the composite sandwich secondary aircraft structure. To provide full-field strain data from the panels, the test rig was designed for use with optical measurement techniques such as thermoelastic stress analysis (TSA) and digital image correlation (DIC). TSA requires a cyclic load to be applied to a structure for the measurement of the strain state; therefore, the test rig has been designed to be mounted on a standard servo-hydraulic test machine. As both TSA and DIC require an uninterrupted view of the surface of the test panel, an important consideration in the design is facilitating the optical access for the two techniques. To aid the test rig design a finite element (FE) model was produced. The model provides information on the deflections that must be accommodated by the test rig, and ensures that the stress and strain levels developed in the panel when loaded in the test rig would be sufficient for measurement using TSA and DIC. Finally, initial tests using the test rig have shown it to be capable of achieving the required pressure and maintaining a cyclic load. It was also demonstrated that both TSA and DIC data can be collected from the panels under load, which are used to validate the stress and deflection derived from the FE model.

77 FR 64796 - Availability of Seats for the Monterey Bay National Marine Sanctuary Advisory Council

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-23

... the Conservation Representative, and the Business and Tourism Activity Panel (``BTAP'') co-chaired by the Business/Industry Representative and Tourism Representative, each dealing with matters concerning...

Are Women Over-Represented in Dead-End Jobs? A Swedish Study Using Empirically Derived Measures of Dead-End Jobs

ERIC Educational Resources Information Center

Bihagen, Erik; Ohls, Marita

2007-01-01

It has been claimed that women experience fewer career opportunities than men do mainly because they are over-represented in "Dead-end Jobs" (DEJs). Using Swedish panel data covering 1.1 million employees with the same employer in 1999 and 2003, measures of DEJ are empirically derived from analyses of wage mobility. The results indicate…

Plans for Action.

ERIC Educational Resources Information Center

National Restaurant Association/American Vocational Association Advisory Council.

This document contains transcripts of nine speeches presented at a panel discussion. During the panel presentations, speakers, who are restauranteurs, food service vocational teachers, food service program coordinators, and industry association representatives, described the programs with which they are involved. The programs range from having…

Effects of moisture, elevated temperature, and fatigue loading on the behavior of graphite/epoxy buffer strip panels with center cracks

NASA Technical Reports Server (NTRS)

Bigelow, C. A.

1988-01-01

The effects of fatigue loading combined with moisture and heat on the behavior of graphite epoxy panels with either Kevlar-49 or S-glass buffer strips were studied. Buffer strip panels, that had a slit in the center to represent damage, were moisture conditioned or heated, fatigue loaded, and then tested in tension to measure their residual strength. The buffer strips were parallel to the loading direction and were made by replacing narrow strips of the 0 deg graphite plies with Kevlar-49 epoxy or S-glass epoxy on a 1-for-1 basis. The panels were subjected to a fatigue loading spectrum. One group of panels was preconditioned by soaking in 60 C water to produce a 1 percent weight gain then tested at room temperature. One group was heated to 82 C during the fatigue loading. Another group was moisture conditioned and then tested at 82 C. The residual strengths of the buffer panels were not highly affected by the fatigue loading, the number of repetitions of the loading spectrum, or the maximum strain level. The moisture conditioning reduced the residual strengths of the S-glass buffer strip panel by 10 to 15 percent below the ambient results. The moisture conditioning did not have a large effect on the Kevlar-49 panels.

Acoustic fatigue and sound transmission characteristics of a ram composite panel design

NASA Technical Reports Server (NTRS)

Cockburn, J. A.; Chang, K. Y.; Kao, G. C.

1972-01-01

An experimental study to determine the acoustic fatigue characteristics of a flat multi-layered structural panel is described. The test panel represented a proposed design for the outer skin of a research application module to be housed within the space shuttle orbiter vehicle. The test specimen was mounted in one wall of the Wyle 100,000 cu ft reverberation room and exposed to a broadband acoustic environment having an overall level of 145 db. The test panel was exposed to nine separate applications of the acoustic environment, each application consisting of 250 seconds duration. Upon completion of the ninth test run, the specimen was exposed to a simulated micrometeoroid impact near the panel center. One additional test run of 250 seconds duration was then performed to complete the overall simulation of 50 flight missions. The experimental results show that no significant fatigue damage occurred until the test specimen was exposed to a simulated micrometeoroid impact. The intermediate foam layer forming the core of the test specimen suffered considerable damage due to this impact, causing a marked variation in the dynamic characteristics of the overall test panel. During the final application of the acoustic environment, the strain and acceleration response spectra showed considerable variation from those spectra obtained prior to impact of the panel. Fatigue damage from acoustic loading however, was limited to partial de-bonding around the edges of the composite panel.

78 FR 4390 - Availability of Seats for the Monterey Bay National Marine Sanctuary Advisory Council

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

...'') chaired by the Conservation Representative, and the Business and Tourism Activity Panel (``BTAP'') co-chaired by the Business/Industry Representative and Tourism Representative, each dealing with matters...

78 FR 14271 - Availability of Seats for the Monterey Bay National Marine Sanctuary Advisory Council

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

... Representative, and the Business and Tourism Activity Panel (``BTAP'') co-chaired by the Business/Industry Representative and Tourism Representative, each dealing with matters concerning research, education, conservation...

Mode 1 and Mode 2 Analysis of Graphite/Epoxy Composites Using Double Cantilever Beam and End-Notched Flexure Tests

NASA Technical Reports Server (NTRS)

Hufnagel, Kathleen P.

1995-01-01

The critical strain energy release rates associated with debonding of the adhesive bondlines in graphite/epoxy IM6/3501-6 interlaminar fracture specimens were investigated. Two panels were manufactured for this investigation; however, panel two was layed-up incorrectly. As a result, data collected from Panel Two serves no real purpose in this investigation. Double Cantilever Beam (DCB) specimens were used to determine the opening Mode I interlaminar fracture toughness, G1(sub c), of uni-directional fiber re-inforced composites. The five specimens tested from Panel One had an average value of 946.42J/sq m for G1(sub c) with an acceptable coefficient of variation. The critical strain energy release rate, G2(sub c), for initiation of delamination under inplane shear loading was investigated using the End-Notched Flexure (ENF) Test. Four specimens were tested from Panel One and an average value of 584.98J/sq m for G2(sub c) was calculated. Calculations from the DCB and ENF test results for Panel One represent typical values of G1(sub c) and G2(sub c) for the adhesive debonding in the material studied in this investigation.

Substantiation Data for Advanced Beaded and Tubular Structural Panels. Volume 3: Testing

NASA Technical Reports Server (NTRS)

Hedges, P. C.; Greene, B. E.

1974-01-01

The test program is described, which was conducted to provide the necessary experimental data to verify the design and analysis methods developed for beaded and tubular panels. Test results are summarized and presented for all local buckling and full size panel tests. Selected representative test data from each of these tests is presented in detail. The results of this program established a valid analysis and design procedure for circular tube panels. Test results from three other configurations show deformational modes which are not adequately accounted for in the present analyses.

Fabrication methods for YF-12 wing panels for the Supersonic Cruise Aircraft Research Program

NASA Technical Reports Server (NTRS)

Hoffman, E. L.; Payne, L.; Carter, A. L.

1975-01-01

Advanced fabrication and joining processes for titanium and composite materials are being investigated by NASA to develop technology for the Supersonic Cruise Aircraft Research (SCAR) Program. With Lockheed-ADP as the prime contractor, full-scale structural panels are being designed and fabricated to replace an existing integrally stiffened shear panel on the upper wing surface of the NASA YF-12 aircraft. The program involves ground testing and Mach 3 flight testing of full-scale structural panels and laboratory testing of representative structural element specimens. Fabrication methods and test results for weldbrazed and Rohrbond titanium panels are discussed. The fabrication methods being developed for boron/aluminum, Borsic/aluminum, and graphite/polyimide panels are also presented.

Transcriptome sequencing of diverse peanut (arachis) wild species and the cultivated species reveals a wealth of untapped genetic variability

USDA-ARS?s Scientific Manuscript database

Next generation sequencing technologies and improved bioinformatics methods have provided opportunities to study sequence variability in complex polyploid transcriptomes. In this study, we used a diverse panel of twenty-two Arachis accessions representing seven Arachis hypogaea market classes, A-, B...

Risk for suicide and risk for violence: a case for separating the current violence diagnoses.

PubMed

Smith, J E; Early, J A; Green, P T; Lauck, D L; Oblaczynski, C; Smochek, M R; Wright, G

1997-01-01

To identify accurate descriptive terms for risk for violence and risk for suicide and to provide operational definitions for these terms The Delphi technique, with two rounds, was used to differentiate the operational definitions that represent risk for suicide from those that represent risk for violence. The expert panel consisted of 23 healthcare professionals with a minimum of a master's degree. In addition to the expert panel, a control group (N = 11) participated to assess content validity. Thirty-six definitions were agreed upon for suicide, 39 for violence. These definitions represent the basic distinctions between the two behavioral manifestations.

Global Panel of HIV-1 Env Reference Strains for Standardized Assessments of Vaccine-Elicited Neutralizing Antibodies

PubMed Central

deCamp, Allan; Hraber, Peter; Bailer, Robert T.; Seaman, Michael S.; Ochsenbauer, Christina; Kappes, John; Gottardo, Raphael; Edlefsen, Paul; Self, Steve; Tang, Haili; Greene, Kelli; Gao, Hongmei; Daniell, Xiaoju; Sarzotti-Kelsoe, Marcella; Gorny, Miroslaw K.; Zolla-Pazner, Susan; LaBranche, Celia C.; Mascola, John R.; Korber, Bette T.

2014-01-01

ABSTRACT Standardized assessments of HIV-1 vaccine-elicited neutralizing antibody responses are complicated by the genetic and antigenic variability of the viral envelope glycoproteins (Envs). To address these issues, suitable reference strains are needed that are representative of the global epidemic. Several panels have been recommended previously, but no clear answers have been available on how many and which strains are best suited for this purpose. We used a statistical model selection method to identify a global panel of reference Env clones from among 219 Env-pseudotyped viruses assayed in TZM-bl cells with sera from 205 HIV-1-infected individuals. The Envs and sera were sampled globally from diverse geographic locations and represented all major genetic subtypes and circulating recombinant forms of the virus. Assays with a panel size of only nine viruses adequately represented the spectrum of HIV-1 serum neutralizing activity seen with the larger panel of 219 viruses. An optimal panel of nine viruses was selected and augmented with three additional viruses for greater genetic and antigenic coverage. The spectrum of HIV-1 serum neutralizing activity seen with the final 12-virus panel closely approximated the activity seen with subtype-matched viruses. Moreover, the final panel was highly sensitive for detection of many of the known broadly neutralizing antibodies. For broader assay applications, all 12 Env clones were converted to infectious molecular clones using a proviral backbone carrying a Renilla luciferase reporter gene (Env.IMC.LucR viruses). This global panel should facilitate highly standardized assessments of vaccine-elicited neutralizing antibodies across multiple HIV-1 vaccine platforms in different parts of the world. IMPORTANCE An effective HIV-1 vaccine will need to overcome the extraordinary genetic variability of the virus, where most variation occurs in the viral envelope glycoproteins that are the sole targets for neutralizing antibodies. Efforts to elicit broadly cross-reactive neutralizing antibodies that will protect against infection by most circulating strains of the virus are guided in part by in vitro assays that determine the ability of vaccine-elicited antibodies to neutralize genetically diverse HIV-1 variants. Until now, little information was available on how many and which strains of the virus are best suited for this purpose. We applied robust statistical methods to evaluate a large neutralization data set and identified a small panel of viruses that are a good representation of the global epidemic. The neutralization properties of this new panel of reference strains should facilitate the development of an effective HIV-1 vaccine. PMID:24352443

Global panel of HIV-1 Env reference strains for standardized assessments of vaccine-elicited neutralizing antibodies.

PubMed

deCamp, Allan; Hraber, Peter; Bailer, Robert T; Seaman, Michael S; Ochsenbauer, Christina; Kappes, John; Gottardo, Raphael; Edlefsen, Paul; Self, Steve; Tang, Haili; Greene, Kelli; Gao, Hongmei; Daniell, Xiaoju; Sarzotti-Kelsoe, Marcella; Gorny, Miroslaw K; Zolla-Pazner, Susan; LaBranche, Celia C; Mascola, John R; Korber, Bette T; Montefiori, David C

2014-03-01

Standardized assessments of HIV-1 vaccine-elicited neutralizing antibody responses are complicated by the genetic and antigenic variability of the viral envelope glycoproteins (Envs). To address these issues, suitable reference strains are needed that are representative of the global epidemic. Several panels have been recommended previously, but no clear answers have been available on how many and which strains are best suited for this purpose. We used a statistical model selection method to identify a global panel of reference Env clones from among 219 Env-pseudotyped viruses assayed in TZM-bl cells with sera from 205 HIV-1-infected individuals. The Envs and sera were sampled globally from diverse geographic locations and represented all major genetic subtypes and circulating recombinant forms of the virus. Assays with a panel size of only nine viruses adequately represented the spectrum of HIV-1 serum neutralizing activity seen with the larger panel of 219 viruses. An optimal panel of nine viruses was selected and augmented with three additional viruses for greater genetic and antigenic coverage. The spectrum of HIV-1 serum neutralizing activity seen with the final 12-virus panel closely approximated the activity seen with subtype-matched viruses. Moreover, the final panel was highly sensitive for detection of many of the known broadly neutralizing antibodies. For broader assay applications, all 12 Env clones were converted to infectious molecular clones using a proviral backbone carrying a Renilla luciferase reporter gene (Env.IMC.LucR viruses). This global panel should facilitate highly standardized assessments of vaccine-elicited neutralizing antibodies across multiple HIV-1 vaccine platforms in different parts of the world. An effective HIV-1 vaccine will need to overcome the extraordinary genetic variability of the virus, where most variation occurs in the viral envelope glycoproteins that are the sole targets for neutralizing antibodies. Efforts to elicit broadly cross-reactive neutralizing antibodies that will protect against infection by most circulating strains of the virus are guided in part by in vitro assays that determine the ability of vaccine-elicited antibodies to neutralize genetically diverse HIV-1 variants. Until now, little information was available on how many and which strains of the virus are best suited for this purpose. We applied robust statistical methods to evaluate a large neutralization data set and identified a small panel of viruses that are a good representation of the global epidemic. The neutralization properties of this new panel of reference strains should facilitate the development of an effective HIV-1 vaccine.

Test results for electron beam charging of flexible insulators and composites. [solar array substrates, honeycomb panels, and thin dielectric films

NASA Technical Reports Server (NTRS)

Staskus, J. V.; Berkopec, F. D.

1979-01-01

Flexible solar-array substrates, graphite-fiber/epoxy - aluminum honeycomb panels, and thin dielectric films were exposed to monoenergetic electron beams ranging in energy from 2 to 20 keV in the Lewis Research Center's geomagnetic-substorm-environment simulation facility to determine surface potentials, dc currents, and surface discharges. The four solar-array substrate samples consisted of Kapton sheet reinforced with fabrics of woven glass or carbon fibers. They represented different construction techniques that might be used to reduce the charge accumulation on the array back surface. Five honeycomb-panel samples were tested, two of which were representative of Voyager antenna materials and had either conductive or nonconductive painted surfaces. A third sample was of Navstar solar-array substrate material. The other two samples were of materials proposed for use on Intelsat V. All the honeycomb-panel samples had graphite-fiber/epoxy composite face sheets. The thin dielectric films were 2.54-micrometer-thick Mylar and 7.62-micrometer-thick Kapton.

Exascale Workshop Panel Report Meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khaleel, Mohammad A.

2010-07-01

The Exascale Review Panel consists of 12 scientists and engineers with experience in various aspects of high-performance computing and its application, development, and management. The Panel hear presentations by several representatives of the workshops and town meetings convened over the past few years to examine the need for exascale computation capability and the justification for a U.S. Department of Energy (DOE) program to develop such capability. This report summarizes information provided by the presenters and substantial written reports to the Panel in advance of the meeting in Washington D.C. on January 19-20, 2010. The report also summarizes the Panel's conclusionsmore » with regard to the justification of a DOE-led exascale initiative.« less

Warpage of Large Curved Composite Panels due to Manufacturing Anomalies

NASA Technical Reports Server (NTRS)

Starnes, James H., Jr. (Technical Monitor); Ambur, Damadar (Technical Monitor); Ochinero, T. T.; Hyer, M. W.

2002-01-01

This paper discusses the influences of a misaligned layer, a resin-rich slightly thicker layer, and a small thermal gradient on the thermally-induced deformations of large curved composite panels during cooldown from their cure temperature. The deformations represent warpage of the panels due to anomalies that occur during layup, consolidation, and cure. Two-dimensional finite element analyses are used The deformations are categorized as to their impact on circumferential and twist warpage metrics. The results are intended to highlight the sensitivity of manufactured panel shape to the various unwanted effects that can occur during manufacturing.

Thermal and Optical Properties of Low-E Storm Windows and Panels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Culp, Thomas D.; Widder, Sarah H.; Cort, Katherine A.

Installing low-emissivity (low-E) storm windows and panels over existing windows has been identified as a cost-effective new approach for improving the energy efficiency of existing buildings where window replacement is impractical or too expensive. As such, it is desirable to characterize the key energy performance properties of low-E storm windows and panels when installed over different types of existing primary windows. this paper presents the representative U-factors, solar heat gain coefficients (SGHCs) and visible transmittance properties of the combined assemblies of various storm windows and panel types installed over different primary windows.

5 CFR 2471.9 - Report and recommendations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 3 2011-01-01 2011-01-01 false Report and recommendations. 2471.9... OF THE PANEL § 2471.9 Report and recommendations. (a) When a report is issued after a factfinding... by the Panel, shall contain recommendations. (b) A report of the designated representative containing...

5 CFR 2471.9 - Report and recommendations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Report and recommendations. 2471.9... OF THE PANEL § 2471.9 Report and recommendations. (a) When a report is issued after a factfinding... by the Panel, shall contain recommendations. (b) A report of the designated representative containing...

NCATE's Blue Ribbon Panel Report and NAPDS: Working Together

ERIC Educational Resources Information Center

Van Scoy, Irma J.

2012-01-01

An expert panel including representatives from schools/districts, teacher education, and professional education associations was convened by the National Council for the Accreditation of Teacher Education (NCATE) to make recommendations regarding clinical preparation in teacher education. This article presents an analysis of how the ten design…

Graphical Route Information Panel Signs for Southbound I-35 and SH 130 Travel through Austin

DOT National Transportation Integrated Search

2014-03-01

A Graphic Route Information Panel (GRIP) is a proposed on-roadway signage approach to deliver information in advance of a driver decision point, using a combination of text, colors, and representative maps of the roadway system. The information basis...

The Role of Market Forces in Providing Student Loans.

ERIC Educational Resources Information Center

Burd, Stephen

2000-01-01

Discusses issues addressed by a Congessionally mandated panel to identify and evaluate options for infusing market forces into the student loan program. Notes possible advantages. Conflicting views of the panel's student representatives, college administrators, and lenders are reported concerning reductions of lenders' profits, removal of…

25 CFR 170.170 - How are Indian LTAP centers managed?

Code of Federal Regulations, 2010 CFR

2010-04-01

... ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Indian Local Technical Assistance... Center Director and staff, with the advice of its technical panel under the Indian LTAP agreements. FHWA... technical panel consisting of one BIA Regional Road Engineer, one FHWA representative, one state DOT...

Evaluation of tuberculosis diagnostics in children: 1. Proposed clinical case definitions for classification of intrathoracic tuberculosis disease. Consensus from an expert panel.

PubMed

Graham, Stephen M; Ahmed, Tahmeed; Amanullah, Farhana; Browning, Renee; Cardenas, Vicky; Casenghi, Martina; Cuevas, Luis E; Gale, Marianne; Gie, Robert P; Grzemska, Malgosia; Handelsman, Ed; Hatherill, Mark; Hesseling, Anneke C; Jean-Philippe, Patrick; Kampmann, Beate; Kabra, Sushil Kumar; Lienhardt, Christian; Lighter-Fisher, Jennifer; Madhi, Shabir; Makhene, Mamodikoe; Marais, Ben J; McNeeley, David F; Menzies, Heather; Mitchell, Charles; Modi, Surbhi; Mofenson, Lynne; Musoke, Philippa; Nachman, Sharon; Powell, Clydette; Rigaud, Mona; Rouzier, Vanessa; Starke, Jeffrey R; Swaminathan, Soumya; Wingfield, Claire

2012-05-15

There is a critical need for improved diagnosis of tuberculosis in children, particularly in young children with intrathoracic disease as this represents the most common type of tuberculosis in children and the greatest diagnostic challenge. There is also a need for standardized clinical case definitions for the evaluation of diagnostics in prospective clinical research studies that include children in whom tuberculosis is suspected but not confirmed by culture of Mycobacterium tuberculosis. A panel representing a wide range of expertise and child tuberculosis research experience aimed to develop standardized clinical research case definitions for intrathoracic tuberculosis in children to enable harmonized evaluation of new tuberculosis diagnostic technologies in pediatric populations. Draft definitions and statements were proposed and circulated widely for feedback. An expert panel then considered each of the proposed definitions and statements relating to clinical definitions. Formal group consensus rules were established and consensus was reached for each statement. The definitions presented in this article are intended for use in clinical research to evaluate diagnostic assays and not for individual patient diagnosis or treatment decisions. A complementary article addresses methodological issues to consider for research of diagnostics in children with suspected tuberculosis.

Developing a patient and family research advisory panel to include people with significant disease, multimorbidity and advanced age.

PubMed

Portalupi, Laura B; Lewis, Carmen L; Miller, Carl D; Whiteman-Jones, Kerry L; Sather, Kay A; Nease, Donald E; Matlock, Daniel D

2017-06-01

People who have experienced illness due to significant disease, multimorbidity and/or advanced age are high utilizers of the health care system. Yet this population has had little formal opportunity to participate in guiding the health care research agenda, and few mechanisms exist for researchers to engage this population in an efficient way. We describe the process of developing a standing patient and family advisory panel to incorporate this population's voice into research in the USA. The panel was created at the University of Colorado. Preliminary panel development consisted of a needs assessment, information gathering and participant recruitment. We collected feedback from researchers who consulted with the panel and from panel members in order to better understand the experience from the patient and family member perspective. The patient and family research advisory panel consists of eight advisors who have experience with significant disease, multimorbidity and/or advanced age, two physicians and a program manager. The panel meets every other month for 2 hours with the main purpose of advising diverse researchers on health care studies. People with significant disease, multimorbidity and/or advanced age represent a growing demographic in the USA, and their engagement in research is essential as the model of health care delivery moves from volume to value. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

The Dynamics and Correlates of Religious Service Attendance in Adolescence

ERIC Educational Resources Information Center

Hardie, Jessica Halliday; Pearce, Lisa D.; Denton, Melinda Lundquist

2016-01-01

This study examines changes in religious service attendance over time for a contemporary cohort of adolescents moving from middle to late adolescence. We use two waves of a nationally representative panel survey of youth from the National Study of Youth and Religion (NSYR) to examine the dynamics of religious involvement during adolescence. We…

Socioeconomic Context, Social Support, and Adolescent Mental Health: A Multilevel Investigation

ERIC Educational Resources Information Center

Wight, Richard G.; Botticello, Amanda L.; Aneshensel, Carol S.

2006-01-01

This study examined whether the impact of contextual-level socioeconomic disadvantage on adolescent mental health is contingent upon individual-level perceptions of social support. Data are from the National Longitudinal Study of Adolescent Health (Add Health), a panel survey of a nationally representative United States sample (analytic N =…

Formulating Independent School K-12 Quality Physical Education Program Guidelines

ERIC Educational Resources Information Center

Currie, Stuart M.; Phillips, Michael B.; Jubenville, Colby B.

2012-01-01

The purpose of this study was to formulate Tennessee independent school K-12 quality physical education program guidelines. A panel of 18 physical education representatives from Tennessee independent schools K-12 participated in a three-phase Delphi study and completed three opinionnaires via e-mail. In Phase One, Opinionnaire One solicited panel…

Assets and Life Satisfaction Patterns among Korean Older Adults: Latent Class Analysis

ERIC Educational Resources Information Center

Han, Chang-Keun; Hong, Song-Iee

2011-01-01

This study aims to examine the association of assets with life satisfaction patterns among Korean older adults aged 50 and above. This study used the first two panel data sets (2005 and 2007) from the Korean Retirement and Income Study, which collected information from a nationally representative sample. Key independent variables include financial…

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel: Comparison of In- and Out-of-Autoclave Facesheet Configurations

NASA Technical Reports Server (NTRS)

Pineda, Evan Jorge; Myers, David E.; Kosareo, Daniel N.; Zalewski, Bart F.; Kellas, Sotiris; Dixon, Genevieve D.; Krivanek, Thomas M.; Gyekenyesi, Thomas G.

2014-01-01

Four honeycomb sandwich panels, representing 1/16th arc segments of a 10-m diameter barrel section of the Heavy Lift Launch Vehicle, were manufactured and tested under the NASA Composites for Exploration and the NASA Constellation Ares V programs. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.0 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: in-autoclave IM7/977-3 and out-of-autoclave T40-800b/5320-1. Smaller 3 ft. by 5 ft. panels were cut from the 1/16th barrel sections and tested under compressive loading. Furthermore, linear eigenvalue and geometrically nonlinear finite element analyses were performed to predict the compressive response of each 3 ft. by 5 ft. panel. To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear models yielded good qualitative and quantitative predictions. Additionally, it was correctly predicted that the panel would fail in buckling prior to failing in strength. Furthermore, several imperfection studies were performed to investigate the influence of geometric imperfections, fiber angle misalignments, and three-dimensional effects on the compressive response of the panel.

Panel method for the wake effects on the aerodynamics of vertical-axis wind turbines

NASA Astrophysics Data System (ADS)

Goyal, Udit; Rempfer, Dietmar

2011-11-01

A formulation based on the panel method is implemented for studying the unsteady aerodynamics of straight-bladed vertical-axis wind turbines. A combination of source and vortex distributions is used to represent an airfoil in Darrieus type motion. Our approach represents a low-cost computational technique that takes into account the dynamic changes in angle of attack of the blade during a cycle. A time-stepping mechanism is introduced for the wake convection, and its effects on the aerodynamic forces on the blade are discussed. The focus of the study is to describe the effect of the trailing wakes on the upstream flow conditions and coefficient of performance of the turbines. Results show a decrease in Cp until the wake structure develops and assumes a quasi-steady behavior. A comparison with other models such as single and multiple streamtubes is discussed, and optimization of the blade pitch angle is performed to increase the instantaneous torque and hence the power output from the turbine.

Flightweight radiantly and actively cooled panel: Thermal and structural performance

NASA Technical Reports Server (NTRS)

Shore, C. P.; Nowak, R. J.; Kelly, H. N.

1982-01-01

A 2- by 4-ft flightweight panel was subjected to thermal/structural tests representative of design flight conditions for a Mach 6.7 transport and to off-design conditions simulating flight maneuvers and cooling system failures. The panel utilized Rene 41 heat shields backed by a thin layer of insulation to radiate away most of the 12 Btu/ft2-sec incident heating. A solution of ethylene glycol in water circulating through tubes in an aluminum-honeycomb-sandwich panel absorbed the remainder of the incident heating (0.8 Btu/sq ft-sec). The panel successfully withstood (1) 46.7 hr of radiant heating which included 53 thermal cycles and 5000 cycles of uniaxial inplane loading of + or - 1200 lfb/in; (2) simulated 2g-maneuver heating conditions and simulated cooling system failures without excessive temperatures on the structural panel; and (3) the extensive thermal/structural tests and the aerothermal tests reported in NASA TP-1595 without significant damage to the structural panel, coolant leaks, or hot-gas ingress to the structural panel.

Research Program on Factors Affecting the Brightness of AC Plasma Panels.

DTIC Science & Technology

1983-06-01

representing the second excited electronic con - figuration in neon. In an effort to devise means to improve the brightness and/or efficiency of neon filled...obtained from several panels was found to be very good (Ref. 6), a factor providing important support for the validity of the kinetic modeling pro - cedures...pressure neon Penning mixtures for I conditions typical of plasma panel displays [II]. Their work has pro - vied valuable insight regarding the electrical

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel. Part 2; 6-Ply In-Autoclave Facesheets

NASA Technical Reports Server (NTRS)

Pineda, Evan J.; Meyers, David E.; Kosareo, Daniel N.; Zalewski, Bart F.; Dixon, Genevieve D.

2013-01-01

Four honeycomb sandwich panel types, representing 1/16th arc segments of a 10-m diameter barrel section of the Heavy Lift Launch Vehicle (HLLV), were manufactured and tested under the NASA Composites for Exploration program and the NASA Constellation Ares V program. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.000 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: in-autoclave IM7/977-3 and out-of-autoclave T40-800b/5320-1. Smaller 3- by 5-ft panels were cut from the 1/16th barrel sections. These panels were tested under compressive loading at the NASA Langley Research Center (LaRC). Furthermore, linear eigenvalue and geometrically nonlinear finite element analyses were performed to predict the compressive response of each 3- by 5-ft panel. This manuscript summarizes the experimental and analytical modeling efforts pertaining to the panels composed of 6-ply, IM7/977-3 facesheets (referred to as Panels B-1 and B-2). To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear models yield good qualitative and quantitative predictions. Additionally, it was correctly predicted that the panel would fail in buckling prior to failing in strength. Furthermore, several imperfection studies were performed to investigate the influence of geometric imperfections, fiber angle misalignments, and three-dimensional (3-D) effects on the compressive response of the panel.

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel Part 1: 8-Ply In-Autoclave Facesheets. Part 1; 8-Ply In-Autoclave Facesheets

NASA Technical Reports Server (NTRS)

Myers, David E.; Pineda, Evan J.; Zalewski, Bart F.; Kosareo, Daniel N.; Kellas, Sotiris

2013-01-01

Four honeycomb sandwich panels, representing 1/16th arc segments of a 10-m diameter barrel section of the heavy lift launch vehicle, were manufactured under the NASA Composites for Exploration program and the NASA Space Launch Systems program. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.000 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: inautoclave IM7/977-3 and out-of-autoclave T40-800b/5320-1. Smaller 3.00- by 5.00-ft panels were cut from the 1/16th barrel sections. These panels were tested under compressive loading at the NASA Langley Research Center. Furthermore, linear eigenvalue and geometrically nonlinear finite element analysis was performed to predict the compressive response of the 3.00- by 5.00-ft panels. This manuscript summarizes the experimental and analytical modeling efforts pertaining to the panel composed of 8-ply, IM7/977-3 facesheets (referred to Panel A). To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear models yield good qualitative and quantitative predictions. Additionally, it was predicted correctly that the panel would fail in buckling prior to failing in strength. Furthermore, several imperfection studies were performed to investigate the influence of geometric imperfections, fiber misalignments, and three-dimensional (3 D) effects on the compressive response of the panel.

23 CFR 260.109 - Selection.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Selection. 260.109 Section 260.109 Highways FEDERAL... PROGRAMS Fellowship and Scholarship Grants § 260.109 Selection. (a) Candidates shall be rated by a selection panel appointed by the Director of the NHI. Members of the panel shall represent the highway...

Support for Teaching at Major Universities.

ERIC Educational Resources Information Center

Ericksen, Stanford C., Ed.; Cook, John A., Ed.

Major themes that dominate institutional support for teaching are addressed by representatives of large research-oriented institutions of higher education that form the "Panel on Research and Development of Instructional Resources." The Panel is composed of the Big Ten universities and the University of Chicago. Contents are as follows: "The Panel…

The Community Schools Advisory Panel: A Texas Approach.

ERIC Educational Resources Information Center

Defoe, Bettye Haller

In 1977 the Texas Education Agency (TEA) organized the Community Schools Advisory Panel (CSAP) because administrators of smaller school districts wanted regular opportunities to express their schools' views to TEA decision makers, especially the Commissioner of Education. CSAP consists of 14 representatives of Texas' 1,009 community schools…

COSPAR report to United Nations 2004: satellite dynamics

NASA Technical Reports Server (NTRS)

Willis, Pascal

2004-01-01

The COSPAR Panel on Satellite Dynamics (PSD) is concerned with the determination of the position, velocity and orientation in space of artificial and natural satellites around the Earth or in the outer space. The following report highlighs representative activities of this panel and provides general information on related international aspects.

Installation of dynamic travel time signs and efforts to obtain and test a graphical route information panel (GRIP) sign in Austin.

DOT National Transportation Integrated Search

2016-08-01

Graphic Route Information Panel (GRIP) signs use a combination of text, colors, and representative maps of : the roadway system to convey real-time roadway congestion location and severity information. The intent of : this project was to facilitate t...

Prospecting sugarcane resistance to Sugarcane yellow leaf virus by genome-wide association.

PubMed

Debibakas, S; Rocher, S; Garsmeur, O; Toubi, L; Roques, D; D'Hont, A; Hoarau, J-Y; Daugrois, J H

2014-08-01

Using GWAS approaches, we detected independent resistant markers in sugarcane towards a vectored virus disease. Based on comparative genomics, several candidate genes potentially involved in virus/aphid/plant interactions were pinpointed. Yellow leaf of sugarcane is an emerging viral disease whose causal agent is a Polerovirus, the Sugarcane yellow leaf virus (SCYLV) transmitted by aphids. To identify quantitative trait loci controlling resistance to yellow leaf which are of direct relevance for breeding, we undertook a genome-wide association study (GWAS) on a sugarcane cultivar panel (n = 189) representative of current breeding germplasm. This panel was fingerprinted with 3,949 polymorphic markers (DArT and AFLP). The panel was phenotyped for SCYLV infection in leaves and stalks in two trials for two crop cycles, under natural disease pressure prevalent in Guadeloupe. Mixed linear models including co-factors representing population structure fixed effects and pairwise kinship random effects provided an efficient control of the risk of inflated type-I error at a genome-wide level. Six independent markers were significantly detected in association with SCYLV resistance phenotype. These markers explained individually between 9 and 14 % of the disease variation of the cultivar panel. Their frequency in the panel was relatively low (8-20 %). Among them, two markers were detected repeatedly across the GWAS exercises based on the different disease resistance parameters. These two markers could be blasted on Sorghum bicolor genome and candidate genes potentially involved in plant-aphid or plant-virus interactions were localized in the vicinity of sorghum homologs of sugarcane markers. Our results illustrate the potential of GWAS approaches to prospect among sugarcane germplasm for accessions likely bearing resistance alleles of significant effect useful in breeding programs.

Validation of a Cost-Efficient Multi-Purpose SNP Panel for Disease Based Research

PubMed Central

Hou, Liping; Phillips, Christopher; Azaro, Marco; Brzustowicz, Linda M.; Bartlett, Christopher W.

2011-01-01

Background Here we present convergent methodologies using theoretical calculations, empirical assessment on in-house and publicly available datasets as well as in silico simulations, that validate a panel of SNPs for a variety of necessary tasks in human genetics disease research before resources are committed to larger-scale genotyping studies on those samples. While large-scale well-funded human genetic studies routinely have up to a million SNP genotypes, samples in a human genetics laboratory that are not yet part of such studies may be productively utilized in pilot projects or as part of targeted follow-up work though such smaller scale applications require at least some genome-wide genotype data for quality control purposes such as DNA “barcoding” to detect swaps or contamination issues, determining familial relationships between samples and correcting biases due to population effects such as population stratification in pilot studies. Principal Findings Empirical performance in classification of relative types for any two given DNA samples (e.g., full siblings, parental, etc) indicated that for outbred populations the panel performs sufficiently to classify relationship in extended families and therefore also for smaller structures such as trios and for twin zygosity testing. Additionally, familial relationships do not significantly diminish the (mean match) probability of sharing SNP genotypes in pedigrees, further indicating the uniqueness of the “barcode.” Simulation using these SNPs for an African American case-control disease association study demonstrated that population stratification, even in complex admixed samples, can be adequately corrected under a range of disease models using the SNP panel. Conclusion The panel has been validated for use in a variety of human disease genetics research tasks including sample barcoding, relationship verification, population substructure detection and statistical correction. Given the ease of genotyping our specific assay contained herein, this panel represents a useful and economical panel for human geneticists. PMID:21611176

Acoustic Treatment Design Scaling Methods. Volume 3; Test Plans, Hardware, Results, and Evaluation

NASA Technical Reports Server (NTRS)

Yu, J.; Kwan, H. W.; Echternach, D. K.; Kraft, R. E.; Syed, A. A.

1999-01-01

The ability to design, build, and test miniaturized acoustic treatment panels on scale-model fan rigs representative of the full-scale engine provides not only a cost-savings, but an opportunity to optimize the treatment by allowing tests of different designs. To be able to use scale model treatment as a full-scale design tool, it is necessary that the designer be able to reliably translate the scale model design and performance to an equivalent full-scale design. The primary objective of the study presented in this volume of the final report was to conduct laboratory tests to evaluate liner acoustic properties and validate advanced treatment impedance models. These laboratory tests include DC flow resistance measurements, normal incidence impedance measurements, DC flow and impedance measurements in the presence of grazing flow, and in-duct liner attenuation as well as modal measurements. Test panels were fabricated at three different scale factors (i.e., full-scale, half-scale, and one-fifth scale) to support laboratory acoustic testing. The panel configurations include single-degree-of-freedom (SDOF) perforated sandwich panels, SDOF linear (wire mesh) liners, and double-degree-of-freedom (DDOF) linear acoustic panels.

Analytical Studies of Boundary Layer Generated Aircraft Interior Noise

NASA Technical Reports Server (NTRS)

Howe, M. S.; Shah, P. L.

1997-01-01

An analysis is made of the "interior noise" produced by high, subsonic turbulent flow over a thin elastic plate partitioned into "panels" by straight edges transverse to the mean flow direction. This configuration models a section of an aircraft fuselage that may be regarded as locally flat. The analytical problem can be solved in closed form to represent the acoustic radiation in terms of prescribed turbulent boundary layer pressure fluctuations. Two cases are considered: (i) the production of sound at an isolated panel edge (i.e., in the approximation in which the correlation between sound and vibrations generated at neighboring edges is neglected), and (ii) the sound generated by a periodic arrangement of identical panels. The latter problem is amenable to exact analytical treatment provided the panel edge conditions are the same for all panels. Detailed predictions of the interior noise depend on a knowledge of the turbulent boundary layer wall pressure spectrum, and are given here in terms of an empirical spectrum proposed by Laganelli and Wolfe. It is expected that these analytical representations of the sound generated by simplified models of fluid-structure interactions can used to validate more general numerical schemes.

A Diverse Panel of Hepatitis C Virus Glycoproteins for Use in Vaccine Research Reveals Extremes of Monoclonal Antibody Neutralization Resistance.

PubMed

Urbanowicz, Richard A; McClure, C Patrick; Brown, Richard J P; Tsoleridis, Theocharis; Persson, Mats A A; Krey, Thomas; Irving, William L; Ball, Jonathan K; Tarr, Alexander W

2015-12-23

Despite significant advances in the treatment of hepatitis C virus (HCV) infection, the need to develop preventative vaccines remains. Identification of the best vaccine candidates and evaluation of their performance in preclinical and clinical development will require appropriate neutralization assays utilizing diverse HCV isolates. We aimed to generate and characterize a panel of HCV E1E2 glycoproteins suitable for subsequent use in vaccine and therapeutic antibody testing. Full-length E1E2 clones were PCR amplified from patient-derived serum samples, cloned into an expression vector, and used to generate viral pseudoparticles (HCVpp). In addition, some of these clones were used to generate cell culture infectious (HCVcc) clones. The infectivity and neutralization sensitivity of these viruses were then determined. Bioinformatic and HCVpp infectivity screening of approximately 900 E1E2 clones resulted in the assembly of a panel of 78 functional E1E2 proteins representing distinct HCV genotypes and different stages of infection. These HCV glycoproteins differed markedly in their sensitivity to neutralizing antibodies. We used this panel to predict antibody efficacy against circulating HCV strains, highlighting the likely reason why some monoclonal antibodies failed in previous clinical trials. This study provides the first objective categorization of cross-genotype patient-derived HCV E1E2 clones according to their sensitivity to antibody neutralization. It has shown that HCV isolates have clearly distinguishable neutralization-sensitive, -resistant, or -intermediate phenotypes, which are independent of genotype. The panel provides a systematic means for characterization of the neutralizing response elicited by candidate vaccines and for defining the therapeutic potential of monoclonal antibodies. Hepatitis C virus (HCV) has a global burden of more than 170 million people, many of whom cannot attain the new, expensive, direct-acting antiviral therapies. A safe and effective vaccine that generates both T cell responses and neutralizing antibodies is required to eradicate the disease. Regions within the HCV surface glycoproteins E1 and E2 are essential for virus entry and are targets for neutralizing antibodies. Screening of vaccine candidates requires suitable panels of glycoproteins that represent the breadth of neutralization resistance. Use of a standard reference panel for vaccine studies will ensure comparability of data sets, as has become routine for HIV-1. Here, we describe a large panel of patient-derived HCV glycoproteins with an assessment of their neutralization sensitivity to defined monoclonal antibodies, which has enabled us to predict their likely efficacy in the wider HCV-infected population. The panel could also be important for future selection of additional therapeutic antibodies and for vaccine design. Copyright © 2016 Urbanowicz et al.

Determinants of Demand for Private Supplementary Tutoring in China: Findings from a National Survey

ERIC Educational Resources Information Center

Liu, Junyan; Bray, Mark

2017-01-01

Private tutoring has expanded and intensified in China. However, no government statistical data or other empirical studies fully capture its extent and characteristics. This paper analyses private tutoring received by students in Grades 1-12 as indicated by a nationwide representative survey entitled China Family Panel Studies. The paper employs a…

The Role of Residential Segregation in Explaining Racial Gaps in Childhood and Adolescent Obesity

ERIC Educational Resources Information Center

Ryabov, Igor

2018-01-01

The present study used nationally representative data from the U.S. Panel Study of Income Dynamics (PSID) merged with census-track data from the American Community Survey (ACS) to model race-ethnic disparities in overweight, obesity, and obesity-related disease among children and adolescents as a function of neighborhood race-ethnic segregation,…

What Do Unions Do for Women?

ERIC Educational Resources Information Center

Spalter-Roth, Roberta; And Others

A study used data for the 1987 calendar year from the 1986 and 1987 panels of the Survey of Income and Program Participation (SIPP) to examine the impact of union membership on women's wages and job tenure. The data set included 17,200 sample members, representing about 79 million workers, aged 16-64. The study mapped the distribution of union…

"A Prophecy for the Arts" in Higher Education

ERIC Educational Resources Information Center

Merrion, Margaret

2009-01-01

This article presents a Delphi study that captured a myriad of predictions that represent the best thinking of a panel of creative minds, experts in a variety of arts and with many years of experience as arts leaders. Predictions provide a set of interlinked challenges and opportunities. In this study, the experts forecast changes in students that…

Self-Esteem and Delinquency in South Korean Adolescents: Latent Growth Modeling

ERIC Educational Resources Information Center

Lee, Kyungeun; Lee, Julie

2012-01-01

This study examined the inter-related development of self-esteem and delinquency across three years. Participants were 3449 Korean high school adolescents (age M = 15.8, SD = 0.42, 1725 boys, 1724 girls) from Korea Youth Panel Study (KYPS), in 2005-2007, nationally representative of Korean adolescents. Latent growth modeling was employed for…

Selection into Medicine Using Interviews and Other Measures: Much Remains to Be Learned

ERIC Educational Resources Information Center

Ma, Colleen; Harris, Peter; Cole, Andrew; Jones, Phil; Shulruf, Boaz

2016-01-01

The objectives of this study were to identify the effectiveness of the panel admission interview as a selection tool for the medical program and identify improvements in the selection tools battery. Data from 1024 students, representing four cohorts of students were used in this study. Exploratory factor analysis using principal component analysis…

Characteristics of Viable and Sustainable Workers for the Year 2015.

ERIC Educational Resources Information Center

Dean, Brenda Pennington; West, Russell

A two-round Delphi study was conducted to identify the characteristics of viable and sustainable employees in northeastern Tennessee in 2015. The Delphi panel selected for the study consisted of 25 experts who represented a cross-section of the businesses and communities in the 10-county area of northeastern Tennessee served by Walters State…

Educational Achievement of Immigrant Adolescents in Spain: Do Gender and Region of Origin Matter?

ERIC Educational Resources Information Center

Vaquera, Elizabeth; Kao, Grace

2012-01-01

This study explores the educational achievement of immigrant youth in Spain employing data from 3 waves of the Longitudinal Study of Families and Childhood (Panel de Families i Infancia), a representative sample of children in Catalonia first interviewed at ages 13-16 in 2006 (N = 2,710). Results suggest consistent disadvantage in achievement…

The Impact of Educational Mismatch on Firm Productivity: Evidence from Linked Panel Data

ERIC Educational Resources Information Center

Kampelmann, Stephan; Rycx, Francois

2012-01-01

We provide first evidence regarding the direct impact of educational mismatch on firm productivity. To do so, we rely on representative linked employer-employee panel data for Belgium covering the period 1999-2006. Controlling for simultaneity issues, time-invariant unobserved workplace characteristics, cohort effects and dynamics in the…

The White Cube in the Black Box: Assessing Artistic Research Quality in Multidisciplinary Academic Panels

ERIC Educational Resources Information Center

Wilson, Jennifer

2016-01-01

Despite its imperfections, academic peer review has been accepted as a satisfactory process by which assessment panels comprised of different disciplinary representatives arrive at agreement through a system of shared rules and language that respects disciplinary plurality. Artistic researchers, whose output is required to meet both scholarly…

Modeling of trim panels in the energy finite element analysis

NASA Astrophysics Data System (ADS)

Moravaeji, Seyed-Javid

Modeling a trim panel is divided into finding the power exchange through two different paths: (i) the connection of the outer and inner panels (ii) through the layers directly. The vibrational power exchanged through the mounts is modeled as the connection of two parallel plates connected via a beam. Wave matrices representing plates and beams are derived separately; then a matrix method is proposed to solve for the wave amplitudes and hence the vibrational power exchange between the plates accordingly. A closed form formula for the case of connection of two identical plates is derived. For the power transmission loss directly through the layers, first transfer matrices representing layers made of different materials is considered. New matrices for a porous layer are derived. A method of finding the layered structure transfer matrix is proposed. It is concluded that in general a single isotropic layer cannot replace a structure accurately. Finally, on the basis of an equivalent transfer matrix, an optimization process for is proposed to replace the panel by a suitable set of layers.

Chiropractic management of low back disorders: report from a consensus process.

PubMed

Globe, Gary A; Morris, Craig E; Whalen, Wayne M; Farabaugh, Ronald J; Hawk, Cheryl

2008-01-01

Although a number of guidelines addressing manipulation, an important component of chiropractic professional care, exist, none to date have incorporated a broad-based consensus of chiropractic research and clinical experts representing mainstream chiropractic practice into a practical document designed to provide standardized parameters of care. The purpose of this project was to develop such a document. Development of the document began with seed materials, from which seed statements were distilled. These were circulated electronically to the Delphi panel until consensus was reached, which was considered to be present when there was agreement by at least 80% of the panelists. The panel consisted of 40 clinically experienced doctors of chiropractic, representing 15 chiropractic colleges and 16 states, as well as both the American Chiropractic Association and the International Chiropractic Association. The panel reached 80% consensus of the 27 seed statements after 2 rounds. Specific recommendations regarding treatment frequency and duration, as well as outcome assessment and contraindications for manipulation were agreed upon by the panel. A broad-based panel of experienced chiropractors was able to reach a high level (80%) of consensus regarding specific aspects of the chiropractic approach to care for patients with low back pain, based on both the scientific evidence and their clinical experience.

Effect of Impact Location on the Response of Shuttle Wing Leading Edge Panel 9

NASA Technical Reports Server (NTRS)

Lyle, Karen H.; Spellman, Regina L.; Hardy, Robin C.; Fasanella, Edwin L.; Jackson, Karen E.

2005-01-01

The objective of this paper is to compare the results of several simulations performed to determine the worst-case location for a foam impact on the Space Shuttle wing leading edge. The simulations were performed using the commercial non-linear transient dynamic finite element code, LS-DYNA. These simulations represent the first in a series of parametric studies performed to support the selection of the worst-case impact scenario. Panel 9 was selected for this study to enable comparisons with previous simulations performed during the Columbia Accident Investigation. The projectile for this study is a 5.5-in cube of typical external tank foam weighing 0.23 lb. Seven locations spanning the panel surface were impacted with the foam cube. For each of these cases, the foam was traveling at 1000 ft/s directly aft, along the orbiter X-axis. Results compared from the parametric studies included strains, contact forces, and material energies for various simulations. The results show that the worst case impact location was on the top surface, near the apex.

Development and initial validity of the in-hand manipulation assessment.

PubMed

Klymenko, Gabrielle; Liu, Karen P Y; Bissett, Michelle; Fong, Kenneth N K; Welage, Nandana; Wong, Rebecca S M

2018-04-01

A review of the literature related to in-hand manipulation (IHM) revealed that there is no assessment which specifically measures this construct in the adult population. This study reports the face and content validity of an IHM assessment for adults with impaired hand function based on expert opinion. The definition of IHM skills, assessment tasks and scoring methods identified from literature was discussed in a focus group (n = 4) to establish face validity. An expert panel (n = 16) reviewed the content validity of the proposed assessment; evaluating the representativeness and relevance of encompassing the IHM skills in the proposed assessment tasks, the clarity and importance to daily life of the task and the clarity and applicability to clinical environment of the scoring method. The content validity was calculated using the content validity index for both the individual task and all tasks together (I-CVI and S-CVI). Feedback was incorporated to create the assessment. The focus group members agreed to include 10 assessment tasks that covered all IHM skills. In the expert panel review, all tasks received an I-CVI above 0.78 and S-CVI above 0.80 in representativeness and relevance ratings, representing good content validity. With the comments from the expert panel, tasks were modified to improve the clarity and importance to daily life. A four-point Likert scale was identified for assessing both the completion of the assessment tasks and the quality of IHM skills within the task performance. Face and content validity were established in this new IHM assessment. Further studies to examine psychometric properties and use within clinical practice are recommended. © 2018 Occupational Therapy Australia.

Behavior of composite sandwich panels with several core designs at different impact velocities

NASA Astrophysics Data System (ADS)

Jiga, Gabriel; Stamin, Ştefan; Dinu, Gabriela

2018-02-01

A sandwich composite represents a special class of composite materials that is manufactured by bonding two thin but stiff faces to a low density and low strength but thick core. The distance between the skins given by the core increases the flexural modulus of the panel with a low mass increase, producing an efficient structure able to resist at flexural and buckling loads. The strength of sandwich panels depends on the size of the panel, skins material and number or density of the cells within it. Sandwich composites are used widely in several industries, such as aerospace, automotive, medical and leisure industries. The behavior of composite sandwich panels with different core designs under different impact velocities are analyzed in this paper by numerical simulations performed on sandwich panels. The modeling was done in ANSYS and the analysis was performed through LS-DYNA.

Actively cooled plate fin sandwich structural panels for hypersonic aircraft

NASA Technical Reports Server (NTRS)

Smith, L. M.; Beuyukian, C. S.

1979-01-01

An unshielded actively cooled structural panel was designed for application to a hypersonic aircraft. The design was an all aluminum stringer-stiffened platefin sandwich structure which used a 60/40 mixture of ethylene glycol/water as the coolant. Eight small test specimens of the basic platefin sandwich concept and three fatigue specimens from critical areas of the panel design was fabricated and tested (at room temperature). A test panel representative of all features of the panel design was fabricated and tested to determine the combined thermal/mechanical performance and structural integrity of the system. The overall findings are that; (1) the stringer-stiffened platefin sandwich actively cooling concept results in a low mass design that is an excellent contender for application to a hypersonic vehicle, and (2) the fabrication processes are state of the art but new or modified facilities are required to support full scale panel fabrication.

Assessing the need for a new nationally representative household panel survey in the United States

PubMed Central

Moffitt, Robert; Schoeni, Robert F.; Brown, Charles; Chase-Lansdale, P. Lindsay; Couper, Mick P.; Diez-Roux, Ana V.; Hurst, Erik; Seltzer, Judith A.

2015-01-01

We introduce this special issue on the critical matter of whether the existing household panel surveys in the U.S. are adequate to address the important emerging social science and policy questions of the next few decades. We summarize the conference papers which address this issue in different domains. The papers detail many new and important emerging research questions but also identify key limitations in existing panels in addressing those questions. To address these limitations, we consider the advantages and disadvantages of initiating a new, general-purpose omnibus household panel in the U.S. We also discuss the particular benefits of starting new panels that have specific targeted domains such as child development, population health and health care. We also develop a list of valuable enhancements to existing panels which could address many of their limitations. PMID:26688609

Diagnostic performance of a biomarker panel as a negative predictor for acute appendicitis in adult ED patients with abdominal pain.

PubMed

Huckins, David S; Copeland, Karen; Self, Wesley; Vance, Cheryl; Hendry, Phyllis; Borg, Keith; Gogain, Joseph

2017-03-01

Evaluate the diagnostic accuracy of the APPY1TM biomarker panel, previously described for use in pediatric patients, for identifying adult ED patients with abdominal pain who are at low risk of acute appendicitis. This study prospectively enrolled subjects >18years of age presenting to seven U.S. emergency departments with <72hours of abdominal pain suggesting possible acute appendicitis. The APPY1 panel was performed on blood samples drawn from each patient at the time of initial evaluation and results were correlated with the final diagnosis either positive or negative for acute appendicitis. 431 patients were enrolled with 422 completing all aspects of the study. The APPY1 biomarker panel exhibited a sensitivity of 97.5% (95% CI, 91.3-99.3%), a negative predictive value of 98.4% (95% CI, 94.4-99.6%), a negative likelihood ratio of 0.07 (95% CI, 0.02-0.27), with a specificity of 36.5% (95% CI, 31.6-41.8%) for acute appendicitis. The panel correctly identified 125 of 342 (36.6%) patients who did not have appendicitis with 2 (2.5%) false negatives. The CT utilization rate in this population was 72.7% (307/422). Of 307 CT scans, 232 were done for patients who did not have appendicitis and 79 (34%) of these patients were correctly identified as negative with "low risk" biomarker panel results, representing 26% (79/307) of all CT scans performed. This biomarker panel exhibited high sensitivity and negative predictive value for acute appendicitis in this prospective adult cohort, thereby potentially reducing the dependence on CT for the evaluation of possible acute appendicitis. Copyright © 2016 Elsevier Inc. All rights reserved.

Design and fabrication of brazed Rene 41 honeycomb sandwich structural panels for advanced space transportation systems

NASA Technical Reports Server (NTRS)

Hepler, A. K.; Swegle, A. R.

1981-01-01

The design and fabrication of two large brazed Rene 41 honeycomb panels, the establishment of a test plan, the design and fabrication of a test fixture to subject the panels to cyclic thermal gradients and mechanical loads equivalent to those imposed on an advanced space transportation vehicle during its boost and entry trajectories are discussed. The panels will be supported at four points, creating three spans. The outer spans are 45.7 cm (18 in.) and the center span 76.2 cm (30 in). Specimen width is 30.5 cm (12 in.). The panels were primarily designed by boost conditions simulated by subjecting the panels to liquid nitrogen, 77K (-320 F) on one side and 455K (360 F) on the other side and by mechanically imposing loads representing vehicle fuel pressure loads. Entry conditions were simulated by radiant heating to 1034K (1400 F). The test program subjected the panels to 500 boost thermal conditions. Results are presented.

78 FR 20093 - Extension of Application Period for Seats for the Monterey Bay National Marine Sanctuary Advisory...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-03

... Business and Tourism Activity Panel (``BTAP'') co-chaired by the Business/Industry Representative and Tourism Representative, each dealing with matters concerning research, education, conservation and human...

Flight service evaluation of composite helicopter components

NASA Technical Reports Server (NTRS)

Rich, M. J.; Lowry, D. W.

1985-01-01

An assessment of composite helicopter structures, exposed to environmental effects, after four years of commercial service is presented. This assessment is supported by test results of helicopter components and test panels which have been exposed to environmental effects since late 1979. Full scale static and fatigue tests are being conducted on composite components obtained from S-76 helicopters in commercial operations in the Gulf Coast region of Louisiana. Small scale tests are being conducted on coupons obtained from panels being exposed to outdoor conditions in Stratford, Connecticut and West Palm Beach, Florida. The panel layups represent S-76 components. Moisture evaluations and strength tests are being conducted, on the S-76 components and panels, over a period of eight years. Results are discussed for components and panels with up to four years of exposure.

Characterization of Debris from the DebriSat Hypervelocity Test

NASA Technical Reports Server (NTRS)

Rivero, M.; Kleespies, J.; Patankar, K.; Fitz-Coy, N.; Liou, J.-C.; Sorge, M.; Huynh, T.; Opiela, J.; Krisko, P.; Cowardin, H.

2015-01-01

The DebriSat project is an effort by NASA and the DoD to update the standard break-up model for objects in orbit. The DebriSat object, a 56 kg representative LEO satellite, was subjected to a hypervelocity impact in April 2014. For the hypervelocity test, the representative satellite was suspended within a "soft-catch" arena formed by polyurethane foam panels to minimize the interactions between the debris generated from the hypervelocity impact and the metallic walls of the test chamber. After the impact, the foam panels and debris not caught by the panels were collected and shipped to the University of Florida where the project has now advanced to the debris characterization stage. The characterization effort has been divided into debris collection, measurement, and cataloguing. Debris collection and cataloguing involves the retrieval of debris from the foam panels and cataloguing the debris in a database. Debris collection is a three-step process: removal of loose debris fragments from the surface of the foam panels; X-ray imaging to identify/locate debris fragments embedded within the foam panel; extraction of the embedded debris fragments identified during the X-ray imaging process. As debris fragments are collected, they are catalogued into a database specifically designed for this project. Measurement involves determination of size, mass, shape, material, and other physical properties and well as images of the fragment. Cataloguing involves a assigning a unique identifier for each fragment along with the characterization information.

Design, Optimization, and Evaluation of Integrally-Stiffened Al-2139 Panel with Curved Stiffeners

NASA Technical Reports Server (NTRS)

Havens, David; Shiyekar, Sandeep; Norris, Ashley; Bird, R. Keith; Kapania, Rakesh K.; Olliffe, Robert

2011-01-01

A curvilinear stiffened panel was designed, manufactured, and tested in the Combined Load Test Fixture at NASA Langley Research Center. The panel is representative of a large wing engine pylon rib and was optimized for minimum mass subjected to three combined load cases. The optimization included constraints on web buckling, material yielding, crippling or local stiffener failure, and damage tolerance using a new analysis tool named EBF3PanelOpt. Testing was performed for the critical combined compression-shear loading configuration. The panel was loaded beyond initial buckling, and strains and out-of-plane displacements were extracted from a total of 20 strain gages and 6 linear variable displacement transducers. The VIC-3D system was utilized to obtain full field displacements/strains in the stiffened side of the panel. The experimental data were compared with the strains and out-of-plane deflections from a high fidelity nonlinear finite element analysis. The experimental data were also compared with linear elastic finite element results of the panel/test-fixture assembly. Overall, the panel buckled very near to the predicted load in the web regions.

Skin, Stringer, and Fastener Loads in Buckled Fuselage Panels

NASA Technical Reports Server (NTRS)

Young, Richard D.; Rose, Cheryl A.; Starnes, James H., Jr.

2001-01-01

The results of a numerical study to assess the effect of skin buckling on the internal load distribution in a stiffened fuselage panel, with and without longitudinal cracks, are presented. In addition, the impact of changes in the internal loads on the fatigue life and residual strength of a fuselage panel is assessed. A generic narrow-body fuselage panel is considered. The entire panel is modeled using shell elements and considerable detail is included to represent the geometric-nonlinear response of the buckled skin, cross section deformation of the stiffening components, and details of the skin-string attachment with discrete fasteners. Results are presented for a fixed internal pressure and various combinations of axial tension or compression loads. Results illustrating the effect of skin buckling on the stress distribution in the skin and stringer, and fastener loads are presented. Results are presented for the pristine structure, and for cases where damage is introduced in the form of a longitudinal crack adjacent to the stringer, or failed fastener elements. The results indicate that axial compression loads and skin buckling can have a significant effect on the circumferential stress in the skin, and fastener loads, which will influence damage initiation, and a comparable effect on stress intensity factors for cases with cracks. The effects on stress intensity factors will influence damage propagation rates and the residual strength of the panel.

22. View to north in representative rooftop penthouse, showing. elevator ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. View to north in representative rooftop penthouse, showing. elevator cable drums, governors, and (at rear) control panel. - U.S. Navy Fleet Supply Base, Storehouse No. 1, 830 Third Avenue, Brooklyn, Kings County, NY

Evaluation of Tuberculosis Diagnostics in Children: 1. Proposed Clinical Case Definitions for Classification of Intrathoracic Tuberculosis Disease. Consensus From an Expert Panel

PubMed Central

Graham, Stephen M.; Ahmed, Tahmeed; Amanullah, Farhana; Browning, Renee; Cardenas, Vicky; Casenghi, Martina; Cuevas, Luis E.; Gale, Marianne; Gie, Robert P.; Grzemska, Malgosia; Handelsman, Ed; Hatherill, Mark; Hesseling, Anneke C.; Jean-Philippe, Patrick; Kampmann, Beate; Kabra, Sushil Kumar; Lienhardt, Christian; Lighter-Fisher, Jennifer; Madhi, Shabir; Makhene, Mamodikoe; Marais, Ben J.; McNeeley, David F.; Menzies, Heather; Mitchell, Charles; Modi, Surbhi; Mofenson, Lynne; Musoke, Philippa; Nachman, Sharon; Powell, Clydette; Rigaud, Mona; Rouzier, Vanessa; Starke, Jeffrey R.; Swaminathan, Soumya; Wingfield, Claire

2012-01-01

There is a critical need for improved diagnosis of tuberculosis in children, particularly in young children with intrathoracic disease as this represents the most common type of tuberculosis in children and the greatest diagnostic challenge. There is also a need for standardized clinical case definitions for the evaluation of diagnostics in prospective clinical research studies that include children in whom tuberculosis is suspected but not confirmed by culture of Mycobacterium tuberculosis. A panel representing a wide range of expertise and child tuberculosis research experience aimed to develop standardized clinical research case definitions for intrathoracic tuberculosis in children to enable harmonized evaluation of new tuberculosis diagnostic technologies in pediatric populations. Draft definitions and statements were proposed and circulated widely for feedback. An expert panel then considered each of the proposed definitions and statements relating to clinical definitions. Formal group consensus rules were established and consensus was reached for each statement. The definitions presented in this article are intended for use in clinical research to evaluate diagnostic assays and not for individual patient diagnosis or treatment decisions. A complementary article addresses methodological issues to consider for research of diagnostics in children with suspected tuberculosis. PMID:22448023

Enhancing pathogen identification in patients with meningitis and a negative Gram stain using the BioFire FilmArray(®) Meningitis/Encephalitis panel.

PubMed

Wootton, Susan H; Aguilera, Elizabeth; Salazar, Lucrecia; Hemmert, Andrew C; Hasbun, Rodrigo

2016-04-21

Meningitis with a negative cerebrospinal (CSF) Gram stain represents a diagnostic and therapeutic challenge. The purpose of our study was to evaluate the performance of the BioFire FilmArray(®) Meningitis/Encephalitis (FA ME) panel in patients presenting with community-acquired meningitis with a negative Gram stain. CSF from 48 patients with community-acquired meningitis with a negative Gram stain admitted to four hospitals in Houston, TX underwent additional testing by the FA ME. FA ME results were compared to results obtained as part of routine evaluation. The panel detected pathogens not previously identified in 11 (22.9 %) of 48, but did not detect pathogens identified by standard technique (West Nile virus, Histoplasma) in 5 (15.2 %) patients. Rapid testing for the most common pathogens causing meningitis will aid in the diagnosis and treatment of patients with meningitis.

Mobility, Emotion, and Universality in Future Collaboration

NASA Astrophysics Data System (ADS)

Chignell, Mark; Hosono, Naotsune; Fels, Deborah; Lottridge, Danielle; Waterworth, John

The Graphical user interface has traditionally supported personal productivity, efficiency, and usability. With computer supported cooperative work, the focus has been on typical people, doing typical work in a highly rational model of interaction. Recent trends towards mobility, and emotional and universal design are extending the user interface paradigm beyond the routine. As computing moves into the hand and away from the desktop, there is a greater need for dealing with emotions and distractions. Busy and distracted people represent a new kind of disability, but one that will be increasingly prevalent. In this panel we examine the current state of the art, and prospects for future collaboration in non-normative computing requirements. This panel draws together researchers who are studying the problems of mobility, emotion and universality. The goal of the panel is to discuss how progress in these areas will change the nature of future collaboration.

A high-quality human reference panel reveals the complexity and distribution of genomic structural variants.

PubMed

Hehir-Kwa, Jayne Y; Marschall, Tobias; Kloosterman, Wigard P; Francioli, Laurent C; Baaijens, Jasmijn A; Dijkstra, Louis J; Abdellaoui, Abdel; Koval, Vyacheslav; Thung, Djie Tjwan; Wardenaar, René; Renkens, Ivo; Coe, Bradley P; Deelen, Patrick; de Ligt, Joep; Lameijer, Eric-Wubbo; van Dijk, Freerk; Hormozdiari, Fereydoun; Uitterlinden, André G; van Duijn, Cornelia M; Eichler, Evan E; de Bakker, Paul I W; Swertz, Morris A; Wijmenga, Cisca; van Ommen, Gert-Jan B; Slagboom, P Eline; Boomsma, Dorret I; Schönhuth, Alexander; Ye, Kai; Guryev, Victor

2016-10-06

Structural variation (SV) represents a major source of differences between individual human genomes and has been linked to disease phenotypes. However, the majority of studies provide neither a global view of the full spectrum of these variants nor integrate them into reference panels of genetic variation. Here, we analyse whole genome sequencing data of 769 individuals from 250 Dutch families, and provide a haplotype-resolved map of 1.9 million genome variants across 9 different variant classes, including novel forms of complex indels, and retrotransposition-mediated insertions of mobile elements and processed RNAs. A large proportion are previously under reported variants sized between 21 and 100 bp. We detect 4 megabases of novel sequence, encoding 11 new transcripts. Finally, we show 191 known, trait-associated SNPs to be in strong linkage disequilibrium with SVs and demonstrate that our panel facilitates accurate imputation of SVs in unrelated individuals.

Compensating for missing plot observations inforest inventory estimation

Treesearch

Ronald E. McRoberts

2003-01-01

The Enhanced Forest Inventory and Analysis program of the U.S. Forest Service has established a nationwide array of permanent field plots, each representing approximately 2400 ha. Each plot has been assigned to one of five interpenetrating, nonoverlapping panels, with one panel selected for measurement on a rotating basis each year. As with most large surveys,...

Involvement of Youth with Disabilities in State-Level Decision Making. inForum

ERIC Educational Resources Information Center

Muller, Eve

2007-01-01

During the National Association of State Directors of Special Education's (NASDSE) 2005 annual meeting, a panel of youth representatives challenged states to do a better job of including youth with disabilities in state-level decision making (e.g., as members of state advisory panels [SAPs] and/or transition councils). State directors of special…

How Do Children Spend Their Time? Children's Activities, School Achievement, and Well-Being. Research on Today's Issues, Issue No. 11.

ERIC Educational Resources Information Center

Population Reference Bureau, Inc., Washington, DC.

This briefing paper describes research findings on factors linked to children's school achievement and emotional adjustment. The findings are based on the Child Development Supplement of the Panel Study of Income Dynamics, a nationally representative, longitudinal study of children and families conducted at the University of Michigan and supported…

Analysis of Panel Data

NASA Astrophysics Data System (ADS)

Hsiao, Cheng

2003-02-01

Panel data models have become increasingly popular among applied researchers due to their heightened capacity for capturing the complexity of human behavior, as compared to cross-sectional or time series data models. This second edition represents a substantial revision of the highly successful first edition (1986). Recent advances in panel data research are presented in an accessible manner and are carefully integrated with the older material. The thorough discussion of theory and the judicious use of empirical examples make this book useful to graduate students and advanced researchers in economics, business, sociology and political science.

Working Papers: Astronomy and Astrophysics Panel Reports

NASA Technical Reports Server (NTRS)

Bahcall, John N.; Beichman, Charles A.; Canizares, Claude; Cronin, James; Heeschen, David; Houck, James; Hunten, Donald; Mckee, Christopher F.; Noyes, Robert; Ostriker, Jeremiah P.

1991-01-01

The papers of the panels appointed by the Astronomy and Astrophysics survey Committee are compiled. These papers were advisory to the survey committee and represent the opinions of the members of each panel in the context of their individual charges. The following subject areas are covered: radio astronomy, infrared astronomy, optical/IR from ground, UV-optical from space, interferometry, high energy from space, particle astrophysics, theory and laboratory astrophysics, solar astronomy, planetary astronomy, computing and data processing, policy opportunities, benefits to the nation from astronomy and astrophysics, status of the profession, and science opportunities.

PRSEUS Acoustic Panel Fabrication

NASA Technical Reports Server (NTRS)

Nicolette, Velicki; Yovanof, Nicolette P.; Baraja, Jaime; Mathur, Gopal; Thrash, Patrick; Pickell, Robert

2011-01-01

This report describes the development of a novel structural concept, Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS), that addresses the demanding fuselage loading requirements for the Hybrid Wing or Blended Wing Body (BWB) airplane configuration with regards to acoustic response. A PRSEUS panel was designed and fabricated and provided to NASA-LaRC for acoustic response testing in the Structural Acoustics Loads and Transmission (SALT) facility). Preliminary assessments of the sound transmission characteristics of a PRSEUS panel subjected to a representative Hybrid Wing Body (HWB) operating environment were completed for the NASA Environmentally Responsible Aviation (ERA) Program.

Using a web-based survey tool to undertake a Delphi study: application for nurse education research.

PubMed

Gill, Fenella J; Leslie, Gavin D; Grech, Carol; Latour, Jos M

2013-11-01

The Internet is increasingly being used as a data collection medium to access research participants. This paper reports on the experience and value of using web-survey software to conduct an eDelphi study to develop Australian critical care course graduate practice standards. The eDelphi technique used involved the iterative process of administering three rounds of surveys to a national expert panel. The survey was developed online using SurveyMonkey. Panel members responded to statements using one rating scale for round one and two scales for rounds two and three. Text boxes for panel comments were provided. For each round, the SurveyMonkey's email tool was used to distribute an individualized email invitation containing the survey web link. The distribution of panel responses, individual responses and a summary of comments were emailed to panel members. Stacked bar charts representing the distribution of responses were generated using the SurveyMonkey software. Panel response rates remained greater than 85% over all rounds. An online survey provided numerous advantages over traditional survey approaches including high quality data collection, ease and speed of survey administration, direct communication with the panel and rapid collation of feedback allowing data collection to be undertaken in 12 weeks. Only minor challenges were experienced using the technology. Ethical issues, specific to using the Internet to conduct research and external hosting of web-based software, lacked formal guidance. High response rates and an increased level of data quality were achieved in this study using web-survey software and the process was efficient and user-friendly. However, when considering online survey software, it is important to match the research design with the computer capabilities of participants and recognize that ethical review guidelines and processes have not yet kept pace with online research practices. Copyright © 2013 Elsevier Ltd. All rights reserved.

Buckling Design and Analysis of a Payload Fairing One-Sixth Cylindrical Arc-Segment Panel

NASA Technical Reports Server (NTRS)

Kosareo, Daniel N.; Oliver, Stanley T.; Bednarcyk, Brett A.

2013-01-01

Design and analysis results are reported for a panel that is a 16th arc-segment of a full 33-ft diameter cylindrical barrel section of a payload fairing structure. Six such panels could be used to construct the fairing barrel, and, as such, compression buckling testing of a 16th arc-segment panel would serve as a validation test of the buckling analyses used to design the fairing panels. In this report, linear and nonlinear buckling analyses have been performed using finite element software for 16th arc-segment panels composed of aluminum honeycomb core with graphiteepoxy composite facesheets and an alternative fiber reinforced foam (FRF) composite sandwich design. The cross sections of both concepts were sized to represent realistic Space Launch Systems (SLS) Payload Fairing panels. Based on shell-based linear buckling analyses, smaller, more manageable buckling test panel dimensions were determined such that the panel would still be expected to buckle with a circumferential (as opposed to column-like) mode with significant separation between the first and second buckling modes. More detailed nonlinear buckling analyses were then conducted for honeycomb panels of various sizes using both Abaqus and ANSYS finite element codes, and for the smaller size panel, a solid-based finite element analysis was conducted. Finally, for the smaller size FRF panel, nonlinear buckling analysis was performed wherein geometric imperfections measured from an actual manufactured FRF were included. It was found that the measured imperfection did not significantly affect the panel's predicted buckling response

Career Patterns: A Twenty-Year Panel Study

ERIC Educational Resources Information Center

Biemann, Torsten; Zacher, Hannes; Feldman, Daniel C.

2012-01-01

Using 20years of employment and job mobility data from a representative German sample (N = 1259), we employ optimal matching analysis (OMA) to identify six career patterns which deviate from the traditional career path of long-term, full-time employment in one organization. Then, in further analyses, we examine which socio-demographic predictors…

An INAR(1) Negative Multinomial Regression Model for Longitudinal Count Data.

ERIC Educational Resources Information Center

Bockenholt, Ulf

1999-01-01

Discusses a regression model for the analysis of longitudinal count data in a panel study by adapting an integer-valued first-order autoregressive (INAR(1)) Poisson process to represent time-dependent correlation between counts. Derives a new negative multinomial distribution by combining INAR(1) representation with a random effects approach.…

Do Residential Conditions Explain the Relationship between Living Arrangements and Adolescent Behavior?

ERIC Educational Resources Information Center

Crowder, Kyle; Teachman, Jay

2004-01-01

Persistent effects of childhood living arrangements and family change on adolescent outcomes have often been attributed to differences in socialization and intrafamily processes. We use data from the Panel Study of Income Dynamics to assess an alternative explanation: that neighborhood context and residential mobility represent a central set of…

Subjective Well-Being among Young People in Transition to Adulthood

ERIC Educational Resources Information Center

Trzcinski, Eileen; Holst, Elke

2008-01-01

This study used a nationally representative sample of young people in Germany from the German Socio-Economic Panel to examine how demographic and socio-economic characteristics of the young persons and their parents, personality traits of the young persons, quality and quantity of relationships, the parent's level of life satisfaction, and other…

Perceptions of Bachelor-Degree Graduates Regarding General Education Program Quality

ERIC Educational Resources Information Center

Bittinger, Sara-Beth

2017-01-01

This study was directed by a modified Delphi-methodology design to gain perspective of the perceptions of alumni regarding the value and applicability of the general education program. The expert-panel participants were 14 alumni of Frostburg State University from various majors, representative of all three colleges, who graduated between 2006 and…

Possible long-term health effects of short-term exposure to chemical agents. Volume 2. Cholinesterase reactivators, psychochemicals, and irritants and vesicants. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1984-01-01

The present report evaluates toxicologic and epidemiologic data relevant to the testing of approximately 750 subjects exposed to cholinesterase reactivators, about 260 exposed to psychochemicals, and 1,500 exposed to irritants or vesicants. A remaining group of subjects used largely in tests involving placebo or innocuous chemicals or conditions is available for comparison and will be discussed later. The report is the work of three panels of scientists--the Panel on Cholinesterase Reactivator Chemicals, the Panel on Psychochemicals, and the Panel on Irritants and Vesicants. The chairman of each panel was selected from the Committee on Toxicology, and the members were selectedmore » on the basis of their knowledge of the compounds in question or because they represented required disciplines.« less

Face-Sheet Quality Analysis and Thermo-Physical Property Characterization of OOA and Autoclave Panels

NASA Technical Reports Server (NTRS)

Miller, Sandi G.; Lort, Richard D., III; Zimmerman, Thomas J.; Sutter, James K.; Pelham, Larry I.; McCorkle, Linda S.; Scheiman, Daniel A.

2012-01-01

Increased application of polymer matrix composite (PMC) materials in large vehicle structures requires consideration of non-autoclave manufacturing technology. The NASA Composites for Exploration project, and its predecessor, Lightweight Spacecraft Structures and Materials project, were tasked with the development of materials and manufacturing processes for structures that will perform in a heavy-lift-launch vehicle environment. Both autoclave and out of autoclave processable materials were considered. Large PMC structures envisioned for such a vehicle included the payload shroud and the interstage connector. In this study, composite sandwich panels representing 1/16th segments of the barrel section of the Ares V rocket fairing were prepared as 1.8 m x 2.4 m sections of the 10 m diameter arc segment. IM7/977-3 was used as the face-sheet prepreg of the autoclave processed panels and T40-800B/5320-1 for the out of autoclave panels. The core was 49.7 kg/sq m (3.1 lb/cu ft (pcf)) aluminum honeycomb. Face-sheets were fabricated by automated tape laying 153 mm wide unidirectional tape. This work details analysis of the manufactured panels where face-sheet quality was characterized by optical microscopy, cured ply thickness measurements, acid digestion, and thermal analysis.

Face-Sheet Quality Analysis and Thermo-Physical Property Characterization of OOA and Autoclave Panels

NASA Technical Reports Server (NTRS)

Miller, Sandi G.; Lort, Richard D., III; Zimmerman, Thomas J.; Sutter, James K.; Pelham, Larry I.; McCorkle, Linda S.; Scheiman, Daniel A.

2012-01-01

Increased application of polymer matrix composite (PMC) materials in large vehicle structures requires consideration of non-autoclave manufacturing technology. The NASA Composites for Exploration project, and its predecessor, Lightweight Spacecraft Structures and Materials project, were tasked with the development of materials and manufacturing processes for structures that will perform in a heavy-lift-launch vehicle environment. Both autoclave and out of autoclave processable materials were considered. Large PMC structures envisioned for such a vehicle included the payload shroud and the interstage connector. In this study, composite sandwich panels representing 1/16th segments of the barrel section of the Ares V rocket fairing were prepared as 1.8 m x 2.4 m sections of the 10 m diameter arc segment. IM7/977-3 was used as the face-sheet prepreg of the autoclave processed panels and T40-800B/5320-1 for the out of autoclave panels. The core was 49.7 kilograms per square meters (3.1 pounds per cubic feet (pcf)) aluminum honeycomb. Face-sheets were fabricated by automated tape laying 153 mm wide unidirectional tape. This work details analysis of the manufactured panels where face-sheet quality was characterized by optical microscopy, cured ply thickness measurements, acid digestion, and thermal analysis.

Buckling of a Longitudinally Jointed Curved Composite Panel Arc Segment for Next Generation of Composite Heavy Lift Launch Vehicles: Verification Testing Analysis

NASA Technical Reports Server (NTRS)

Farrokh, Babak; Segal, Kenneth N.; Akkerman, Michael; Glenn, Ronald L.; Rodini, Benjamin T.; Fan, Wei-Ming; Kellas, Sortiris; Pineda, Evan J.

2014-01-01

In this work, an all-bonded out-of-autoclave (OoA) curved longitudinal composite joint concept, intended for use in the next generation of composite heavy lift launch vehicles, was evaluated and verified through finite element (FE) analysis, fabrication, testing, and post-test inspection. The joint was used to connect two curved, segmented, honeycomb sandwich panels representative of a Space Launch System (SLS) fairing design. The overall size of the resultant panel was 1.37 m by 0.74 m (54 in by 29 in), of which the joint comprised a 10.2 cm (4 in) wide longitudinal strip at the center. NASTRAN and ABAQUS were used to perform linear and non-linear analyses of the buckling and strength performance of the jointed panel. Geometric non-uniformities (i.e., surface contour imperfections) were measured and incorporated into the FE model and analysis. In addition, a sensitivity study of the specimens end condition showed that bonding face-sheet doublers to the panel's end, coupled with some stress relief features at corner-edges, can significantly reduce the stress concentrations near the load application points. Ultimately, the jointed panel was subjected to a compressive load. Load application was interrupted at the onset of buckling (at 356 kN 80 kips). A post-test non-destructive evaluation (NDE) showed that, as designed, buckling occurred without introducing any damage into the panel or the joint. The jointed panel was further capable of tolerating an impact damage to the same buckling load with no evidence of damage propagation. The OoA cured all-composite joint shows promise as a low mass factory joint for segmented barrels.

Validation of general job satisfaction in the Korean Labor and Income Panel Study.

PubMed

Park, Shin Goo; Hwang, Sang Hee

2017-01-01

The purpose of this study is to assess the validity and reliability of general job satisfaction (JS) in the Korean Labor and Income Panel Study (KLIPS). We used the data from the 17th wave (2014) of the nationwide KLIPS, which selected a representative panel sample of Korean households and individuals aged 15 or older residing in urban areas. We included in this study 7679 employed subjects (4529 males and 3150 females). The general JS instrument consisted of five items rated on a scale from 1 (strongly disagree) to 5 (strongly agree). The general JS reliability was assessed using the corrected item-total correlation and Cronbach's alpha coefficient. The validity of general JS was assessed using confirmatory factor analysis (CFA) and Pearson's correlation. The corrected item-total correlations ranged from 0.736 to 0.837. Therefore, no items were removed. Cronbach's alpha for general JS was 0.925, indicating excellent internal consistency. The CFA of the general JS model showed a good fit. Pearson's correlation coefficients for convergent validity showed moderate or strong correlations. The results obtained in our study confirm the validity and reliability of general JS.

Use of nondestructive inspection and fiber optic sensing for damage characterization in carbon fiber fuselage structure

NASA Astrophysics Data System (ADS)

Neidigk, Stephen; Le, Jacqui; Roach, Dennis; Duvall, Randy; Rice, Tom

2014-04-01

To investigate a variety of nondestructive inspection technologies and assess impact damage characteristics in carbon fiber aircraft structure, the FAA Airworthiness Assurance Center, operated by Sandia National Labs, fabricated and impact tested two full-scale composite fuselage sections. The panels are representative of structure seen on advanced composite transport category aircraft and measured approximately 56"x76". The structural components consisted of a 16 ply skin, co-cured hat-section stringers, fastened shear ties and frames. The material used to fabricate the panels was T800 unidirectional pre-preg (BMS 8-276) and was processed in an autoclave. Simulated hail impact testing was conducted on the panels using a high velocity gas gun with 2.4" diameter ice balls in collaboration with the University of California San Diego (UCSD). Damage was mapped onto the surface of the panels using conventional, hand deployed ultrasonic inspection techniques, as well as more advanced ultrasonic and resonance scanning techniques. In addition to the simulated hail impact testing performed on the panels, 2" diameter steel tip impacts were used to produce representative impact damage which can occur during ground maintenance operations. The extent of impact damage ranges from less than 1 in2 to 55 in2 of interply delamination in the 16 ply skin. Substructure damage on the panels includes shear tie cracking and stringer flange disbonding. It was demonstrated that the fiber optic distributed strain sensing system is capable of detecting impact damage when bonded to the backside of the fuselage.

Floating Solar Photovoltaics Gaining Ground | State, Local, and Tribal

Science.gov Websites

Gaining Ground January 24, 2017 by Alison Holm Floating solar photovoltaic (PV) systems, so-called flotovoltaics (a trademarked term) or floating solar, represent an emerging application in which PV panels are sited on bodies of water. The PV panel technology used for floating solar applications is very similar

Not Too Small To Care: Small Businesses and Child Care. National Advisory Panel Exchange #2.

ERIC Educational Resources Information Center

Eichman, Caroline; Reisman, Barbara

This report of the Child Care Action Committee's National Advisory Panel profiles 29 small businesses employing under 250 workers in 15 states which offer child care benefits to their employees. These businesses do not constitute a representative sample of small businesses. A series of factors for small businesses to consider when planning a child…

Developing consensus-based policy solutions for medicines adherence for Europe: a delphi study

PubMed Central

2012-01-01

Background Non-adherence to prescribed medication is a pervasive problem that can incur serious effects on patients’ health outcomes and well-being, and the availability of resources in healthcare systems. This study aimed to develop practical consensus-based policy solutions to address medicines non-adherence for Europe. Methods A four-round Delphi study was conducted. The Delphi Expert Panel comprised 50 participants from 14 countries and was representative of: patient/carers organisations; healthcare providers and professionals; commissioners and policy makers; academics; and industry representatives. Participants engaged in the study remotely, anonymously and electronically. Participants were invited to respond to open questions about the causes, consequences and solutions to medicines non-adherence. Subsequent rounds refined responses, and sought ratings of the relative importance, and operational and political feasibility of each potential solution to medicines non-adherence. Feedback of individual and group responses was provided to participants after each round. Members of the Delphi Expert Panel and members of the research group participated in a consensus meeting upon completion of the Delphi study to discuss and further refine the proposed policy solutions. Results 43 separate policy solutions to medication non-adherence were agreed by the Panel. 25 policy solutions were prioritised based on composite scores for importance, and operational and political feasibility. Prioritised policy solutions focused on interventions for patients, training for healthcare professionals, and actions to support partnership between patients and healthcare professionals. Few solutions concerned actions by governments, healthcare commissioners, or interventions at the system level. Conclusions Consensus about practical actions necessary to address non-adherence to medicines has been developed for Europe. These actions are also applicable to other regions. Prioritised policy solutions for medicines non-adherence offer a benefit to policymakers and healthcare providers seeking to address this multifaceted, complex problem. PMID:23176439

Combined Loads Test Fixture for Thermal-Structural Testing Aerospace Vehicle Panel Concepts

NASA Technical Reports Server (NTRS)

Fields, Roger A.; Richards, W. Lance; DeAngelis, Michael V.

2004-01-01

A structural test requirement of the National Aero-Space Plane (NASP) program has resulted in the design, fabrication, and implementation of a combined loads test fixture. Principal requirements for the fixture are testing a 4- by 4-ft hat-stiffened panel with combined axial (either tension or compression) and shear load at temperatures ranging from room temperature to 915 F, keeping the test panel stresses caused by the mechanical loads uniform, and thermal stresses caused by non-uniform panel temperatures minimized. The panel represents the side fuselage skin of an experimental aerospace vehicle, and was produced for the NASP program. A comprehensive mechanical loads test program using the new test fixture has been conducted on this panel from room temperature to 500 F. Measured data have been compared with finite-element analyses predictions, verifying that uniform load distributions were achieved by the fixture. The overall correlation of test data with analysis is excellent. The panel stress distributions and temperature distributions are very uniform and fulfill program requirements. This report provides details of an analytical and experimental validation of the combined loads test fixture. Because of its simple design, this unique test fixture can accommodate panels from a variety of aerospace vehicle designs.

NASTRAN DMAP Fuzzy Structures Analysis: Summary of Research

NASA Technical Reports Server (NTRS)

Sparrow, Victor W.

2001-01-01

The main proposed tasks of Cooperative Agreement NCC1-382 were: (1) developing MSC/NASTRAN DMAP language scripts to implement the Soize fuzzy structures approach for modeling the dynamics of complex structures; (2) benchmarking the results of the new code to those for a cantilevered beam in the literature; and (3) testing and validating the new code by comparing the fuzzy structures results to NASA Langley experimental and conventional finite element results for two model test structures representative of aircraft fuselage sidewall construction: (A) a small aluminum test panel (SLP, single longeron panel) with a single longitudinal stringer attached with bolts; and (B) a 47 by 72 inch flat aluminum fuselage panel (AFP, aluminum fuselage panel) including six longitudinal stringers and four frame stiffeners attached with rivets.

Evaluation of beryllium for space shuttle components

NASA Technical Reports Server (NTRS)

Trapp, A. E.

1972-01-01

Application of beryllium to specific full-scale space shuttle structural components and assemblies was studied. Material evaluations were conducted to check the mechanical properties of as-received material to gain design information on characteristics needed for the material in the space shuttle environment, and to obtain data needed for evaluating component and panel tests. Four beryllium structural assemblies were analyzed and designed. Selected components of these assemblies, representing areas of critical loading or design/process uncertainty, were designed and tested, and two panel assemblies were fabricated. Trends in cost and weight factors were determined by progressive estimation at key points of preliminary design, final design, and fabrication to aid in a cost/weight evaluation of the use of beryllium.

Collaborating to Move Research Forward: Proceedings of the 10th Annual Bladder Cancer Think Tank.

PubMed

Kamat, Ashish M; Agarwal, Piyush; Bivalacqua, Trinity; Chisolm, Stephanie; Daneshmand, Sia; Doroshow, James H; Efstathiou, Jason A; Galsky, Matthew; Iyer, Gopa; Kassouf, Wassim; Shah, Jay; Taylor, John; Williams, Stephen B; Quale, Diane Zipursky; Rosenberg, Jonathan E

2016-04-27

The 10th Annual Bladder Cancer Think Tank was hosted by the Bladder Cancer Advocacy Network and brought together a multidisciplinary group of clinicians, researchers, representatives and Industry to advance bladder cancer research efforts. Think Tank expert panels, group discussions, and networking opportunities helped generate ideas and strengthen collaborations between researchers and physicians across disciplines and between institutions. Interactive panel discussions addressed a variety of timely issues: 1) data sharing, privacy and social media; 2) improving patient navigation through therapy; 3) promising developments in immunotherapy; 4) and moving bladder cancer research from bench to bedside. Lastly, early career researchers presented their bladder cancer studies and had opportunities to network with leading experts.

Pediatric surgeons and anesthesiologists expand the dialogue on the neurotoxicity question, rationale for early and delayed surgeries, and practice changes while awaiting definitive evidence.

PubMed

Byrne, Mary W; Casale, Pasquale; Garzon, Maria; Hyman, Joshua E; Lin, Albert Y; Lynch, Lisa R; Schleien, Charles L; Stylianos, Steven

2014-10-01

The Pediatric Anesthesia NeuroDevelopment Assessment team at Columbia University Medical Center Department of Anesthesiology convened its fourth biennial Symposium to address unresolved issues concerning potential neurotoxic effects of anesthetic agents and sedatives on young children and to assess study findings to date. Dialogue initiated at the third Symposium was continued between anesthesiologists, researchers, and a panel of expert pediatric surgeons representing general surgery and dermatology, orthopedic, and urology specialties. The panel explored the need to balance benefits of early surgery using improved technologies against potential anesthetic risks, practice changes while awaiting definitive answers, and importance of continued interprofessional dialogue.

Measurements of the response of transport aircraft ceiling panels to fuel pool fires

NASA Technical Reports Server (NTRS)

Bankston, C. P.; Back, L. H.

1985-01-01

Tests were performed to characterize the responses of various aircraft ceiling panel configurations to a simulated post-crash fire. Attention was given to one currently used and four new ceiling configurations exposed to a fuel pool fire in a circulated air enclosure. The tests were controlled to accurately represent conditions in a real fire. The panels were constructed of fiberglass-epoxy, graphite-phenolic resin, fiberglass-phenolic resin, Kevlar-epoxy, and Kevlar-phenolic resin materials. The phenolic resin-backed sheets performed the best under the circumstances, except when combined with Kevlar, which became porous when charred.

Assessment of the Damage Tolerance of Postbuckled Hat-Stiffened Panels Using Single-Stringer Specimens

NASA Technical Reports Server (NTRS)

Bisagni, Chiara; Vescovini, Riccardo; Davila, Carlos G.

2010-01-01

A procedure is proposed for the assessment of the damage tolerance and collapse of stiffened composite panels using a single-stringer compression specimen. The dimensions of the specimen are determined such that the specimen s nonlinear response and collapse are representative of an equivalent multi-stringer panel in compression. Experimental tests are conducted on specimens with and without an embedded delamination. A shell-based finite element model with intralaminar and interlaminar damage capabilities is developed to predict the postbuckling response as well as the damage evolution from initiation to collapse.

A computer graphics display technique for the examination of aircraft design data

NASA Technical Reports Server (NTRS)

Talcott, N. A., Jr.

1981-01-01

An interactive computer graphics technique has been developed for quickly sorting and interpreting large amounts of aerodynamic data. It utilizes a graphic representation rather than numbers. The geometry package represents the vehicle as a set of panels. These panels are ordered in groups of ascending values (e.g., equilibrium temperatures). The groups are then displayed successively on a CRT building up to the complete vehicle. A zoom feature allows for displaying only the panels with values between certain limits. The addition of color allows a one-time display thus eliminating the need for a display build up.

Dent and Flint maize diversity panels reveal important genetic potential for increasing biomass production.

PubMed

Rincent, R; Nicolas, S; Bouchet, S; Altmann, T; Brunel, D; Revilla, P; Malvar, R A; Moreno-Gonzalez, J; Campo, L; Melchinger, A E; Schipprack, W; Bauer, E; Schoen, C-C; Meyer, N; Ouzunova, M; Dubreuil, P; Giauffret, C; Madur, D; Combes, V; Dumas, F; Bauland, C; Jamin, P; Laborde, J; Flament, P; Moreau, L; Charcosset, A

2014-11-01

Genetic and phenotypic analysis of two complementary maize panels revealed an important variation for biomass yield. Flowering and biomass QTL were discovered by association mapping in both panels. The high whole plant biomass productivity of maize makes it a potential source of energy in animal feeding and biofuel production. The variability and the genetic determinism of traits related to biomass are poorly known. We analyzed two highly diverse panels of Dent and Flint lines representing complementary heterotic groups for Northern Europe. They were genotyped with the 50 k SNP-array and phenotyped as hybrids (crossed to a tester of the complementary pool) in a western European field trial network for traits related to flowering time, plant height, and biomass. The molecular information revealed to be a powerful tool for discovering different levels of structure and relatedness in both panels. This study revealed important variation and potential genetic progress for biomass production, even at constant precocity. Association mapping was run by combining genotypes and phenotypes in a mixed model with a random polygenic effect. This permitted the detection of significant associations, confirming height and flowering time quantitative trait loci (QTL) found in literature. Biomass yield QTL were detected in both panels but were unstable across the environments. Alternative kinship estimator only based on markers unlinked to the tested SNP increased the number of significant associations by around 40% with a satisfying control of the false positive rate. This study gave insights into the variability and the genetic architectures of biomass-related traits in Flint and Dent lines and suggests important potential of these two pools for breeding high biomass yielding hybrid varieties.

An Experimental Evaluation of Cross-Vane Panel Traps for the Collection of Sylvatic Triatomines (Hemiptera: Reduviidae).

PubMed

Updyke, Erin Allmann; Allan, Brian F

2018-02-28

Due to the limited understanding of the sylvatic cycle of Chagas disease transmission, an efficient method to attract and capture sylvatic triatomines (Hemiptera: Reduviidae) is essential to monitor human exposure risk. Current collection methods for sylvatic species, though effective, are labor- and time-intensive. This study evaluated whether modified cross-vane panel traps (commonly used in forest entomology) can be used to attract and capture flying life-stages of sylvatic triatomines and whether a commercially available lure is effective in attracting sylvatic triatomines in the field. We evaluated four trap treatments in both the wet and dry seasons in central Panama: a cross-vane panel trap fitted with an ultraviolet (UV) light, a cross-vane panel trap fitted with a commercially available human-volatile lure, a cross-vane panel trap fitted with both a UV light and a human-volatile lure, and a white sheet fitted with a UV light (a standard collection method) as a control. A total of 45 adult Rhodnius pallescens Barber were captured across 10 nights of trapping representing 112 trap-nights. There was a significant overall effect of trap type on collection success; sheet traps collected more triatomines than lure traps, and there were no differences between the sheet trap and the UV trap, nor between the sheet trap and the UV + lure trap. The lure-only trap did not capture any triatomines in this study. These results indicate that cross-vane panel traps with a UV light are as effective as a sheet trap but offer the advantage of requiring less time and effort to maintain and monitor.

Family Environment and Adolescents' Well-Being Before and After Parents' Marital Disruption: A Longitudinal Analysis.

ERIC Educational Resources Information Center

Sun, Yongmin

2001-01-01

Based on two waves of a large, nationally representative panel, this study demonstrates that even before the disruption, both male and female adolescents from families that subsequently dissolve exhibit more academic, psychological, and behavioral problems than peers whose parents remain married. Analyses also indicate females are as likely to be…

Rural and Urban High School Dropout Rates: Are They Different?

ERIC Educational Resources Information Center

Jordan, Jeffrey L.; Kostandini, Genti; Mykerezi, Elton

2012-01-01

This study estimates the high school dropout rate in rural and urban areas, the determinants of dropping out, and whether the differences in graduation rates have changed over time. We use geocoded data from two nationally representative panel household surveys (NLSY 97 and NLSY 79) and a novel methodology that corrects for biases in graduation…

A Comparison of Web-Based Standard Setting and Monitored Standard Setting.

ERIC Educational Resources Information Center

Harvey, Anne L.; Way, Walter D.

Standard setting, when carefully done, can be an expensive and time-consuming process. The modified Angoff method and the benchmark method, as utilized in this study, employ representative panels of judges to provide recommended passing scores to standard setting decision-makers. It has been considered preferable to have the judges meet in a…

Cell Phones in American High Schools: A National Survey

ERIC Educational Resources Information Center

Obringer, S. John; Coffey, Kent

2007-01-01

A survey instrument to determine school policy and practice regarding cell phone use by teachers and students was developed using a literature review, a panel of experts, and then a pilot study with typical respondents. The survey was mailed out randomly to 200 high school principals representing all 50 states. The return rate was 56 percent with…

Academic Self-Concept and Achievement in Polish Primary Schools: Cross-Lagged Modelling and Gender-Specific Effects

ERIC Educational Resources Information Center

Grygiel, Pawel; Modzelewski, Michal; Pisarek, Jolanta

2017-01-01

This study reports relationships between general academic self-concept and achievement in grade 3 and grade 5. Gender-specific effects were investigated using a longitudinal, two-cycle, 3-year autoregressive cross-lagged panel design in a large, representative sample of Polish primary school pupils (N = 4,226). Analysis revealed (a) reciprocal…

End User Computing at a South African Technikon: Enabling Disadvantaged Students To Meet Employers' Requirements.

ERIC Educational Resources Information Center

Marsh, Cecille

A two-phase study examined the skills required of competent end-users of computers in the workplace and assessed the computing awareness and technological environment of first-year students entering historically disadvantaged technikons in South Africa. First, a DACUM (Developing a Curriculum) panel of nine representatives of local business and…

EXHALED NITRIC OXIDE IS ASSOCIATED WITH OUTDOOR, INDOOR, AND PERSONAL PM2.5 IN CHILDREN WITH ASTHMA IN A PANEL STUDY. (R827355C002)

EPA Science Inventory

The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

A Panel Analysis of Student Mathematics Achievement in the US in the 1990s: Does Increasing the Amount of Time in Learning Activities Affect Math Achievement?

ERIC Educational Resources Information Center

Aksoy, Tevfik; Link, Charles R.

2000-01-01

Uses panel estimation techniques to estimate econometric models of mathematics achievement determinants for a nationally representative sample of high-school students. Extra time spent on math homework increases test scores; an extra hour of TV viewing negatively affects scores. Longer math periods also help. (Contains 56 references.) (MLH)

Florida, 2010 forest inventory and analysis factsheet

Treesearch

Mark J. Brown; Jarek Nowak

2012-01-01

Forest Inventory and Analysis (FIA) factsheets are produced periodically to keep the public up to date on the extent and condition of the forest lands in each State. This factsheet is an annualized update of the full 5-year cycle of panel data completed in 2007 and updated by reprocessing with new 2009 and 2010 panel data. It represents 5 years of data, 40 percent of...

Acoustic Treatment Design Scaling Methods. Volume 5; Analytical and Experimental Data Correlation

NASA Technical Reports Server (NTRS)

Chien, W. E.; Kraft, R. E.; Syed, A. A.

1999-01-01

The primary purpose of the study presented in this volume is to present the results and data analysis of in-duct transmission loss measurements. Transmission loss testing was performed on full-scale, 1/2-scale, and 115-scale treatment panel samples. The objective of the study was to compare predicted and measured transmission loss for full-scale and subscale panels in an attempt to evaluate the variations in suppression between full- and subscale panels which were ostensibly of equivalent design. Generally, the results indicated an unsatisfactory agreement between measurement and prediction, even for full-scale. This was attributable to difficulties encountered in obtaining sufficiently accurate test results, even with extraordinary care in calibrating the instrumentation and performing the test. Test difficulties precluded the ability to make measurements at frequencies high enough to be representative of subscale liners. It is concluded that transmission loss measurements without ducts and data acquisition facilities specifically designed to operate with the precision and complexity required for high subscale frequency ranges are inadequate for evaluation of subscale treatment effects.

Aeronautical technology 2000: A projection of advanced vehicle concepts

NASA Technical Reports Server (NTRS)

1985-01-01

The Aeronautics and Space Engineering Board (ASEB) of the National Research Council conducted a Workshop on Aeronautical Technology: a Projection to the Year 2000 (Aerotech 2000 Workshop). The panels were asked to project advances in aeronautical technologies that could be available by the year 2000. As the workshop was drawing to a close, it became evident that a more comprehensive investigation of advanced air vehicle concepts than was possible in the limited time available at the workshop would be valuable. Thus, a special panel on vehicle applications was organized. In the course of two meetings, the panel identified and described representative types of aircraft judged possible with the workshop's technology projections. These representative aircraft types include: military aircraft; transport aircraft; rotorcraft; extremely high altitude aircraft; and transatmospheric aircraft. Improvements in performance, efficiency, and operational characteristics possible through the application of the workshop's year 2000 technology projections were discussed. The subgroups also identified the technologies considered essential and enhancing or supporting to achieve the projected aircraft improvements.

Developing a measure of provider adherence to improve the implementation of behavioral health services in primary care: a Delphi study

PubMed Central

2013-01-01

Background The integration of behavioral health services into primary care is increasingly popular, yet fidelity of implementation in this area has been infrequently assessed due to the few measurement tools available. A sentinel indicator of fidelity of implementation is provider adherence, or utilization of prescribed procedures and engagement in model-specific behaviors. This study aimed to develop the first self-report measure of behavioral health provider adherence for co-located, collaborative care, a commonly adopted model of behavioral health service delivery in primary care. Methods A preliminary 56-item measure was developed by the research team to represent critical components of adherence among behavioral health providers. To ensure the content validity of the measure, a modified Delphi study was conducted using a panel of co-located, collaborative care model experts. During three rounds of emailed surveys, panel members provided qualitative feedback regarding item content while rating each item’s relevance for behavioral health provider practice. Items with consensus ratings of 80% or greater were included in the final adherence measure. Results The panel consisted of 25 experts representing the Department of Veterans Affairs, the Department of Defense, and academic and community health centers (total study response rate of 76%). During the Delphi process, two new items were added to the measure, four items were eliminated, and a high level of consensus was achieved on the remaining 54 items. Experts identified 38 items essential for model adherence, six items compatible (although not essential) for model adherence, and 10 items that represented prohibited behaviors. Item content addressed several domains, but primarily focused on behaviors related to employing a time-limited, brief treatment model, the scope of patient concerns addressed, and interventions used by providers. Conclusions This study yielded the first content valid self-report measure of critical components of collaborative care adherence for use by behavioral health providers in primary care. Although additional psychometric evaluation is necessary, this measure may assist implementation researchers in clarifying how provider behaviors contribute to clinical outcomes. This measure may also assist clinical stakeholders in monitoring implementation and identifying ways to support frontline providers in delivering high quality services. PMID:23406425

Genotype imputation in the domestic dog

PubMed Central

Meurs, K. M.

2016-01-01

Application of imputation methods to accurately predict a dense array of SNP genotypes in the dog could provide an important supplement to current analyses of array-based genotyping data. Here, we developed a reference panel of 4,885,283 SNPs in 83 dogs across 15 breeds using whole genome sequencing. We used this panel to predict the genotypes of 268 dogs across three breeds with 84,193 SNP array-derived genotypes as inputs. We then (1) performed breed clustering of the actual and imputed data; (2) evaluated several reference panel breed combinations to determine an optimal reference panel composition; and (3) compared the accuracy of two commonly used software algorithms (Beagle and IMPUTE2). Breed clustering was well preserved in the imputation process across eigenvalues representing 75 % of the variation in the imputed data. Using Beagle with a target panel from a single breed, genotype concordance was highest using a multi-breed reference panel (92.4 %) compared to a breed-specific reference panel (87.0 %) or a reference panel containing no breeds overlapping with the target panel (74.9 %). This finding was confirmed using target panels derived from two other breeds. Additionally, using the multi-breed reference panel, genotype concordance was slightly higher with IMPUTE2 (94.1 %) compared to Beagle; Pearson correlation coefficients were slightly higher for both software packages (0.946 for Beagle, 0.961 for IMPUTE2). Our findings demonstrate that genotype imputation from SNP array-derived data to whole genome-level genotypes is both feasible and accurate in the dog with appropriate breed overlap between the target and reference panels. PMID:27129452

The Food and Drug Administration advisory committees and panels: how they are applied to the drug regulatory process.

PubMed

Ciociola, Arthur A; Karlstadt, Robyn G; Pambianco, Daniel J; Woods, Karen L; Ehrenpreis, Eli D

2014-10-01

Food and Drug Administration (FDA) advisory panels and committees play a critical role in advising the FDA on the safety and efficacy of medical devices and drugs marketed in the US. Advisory panel recommendations are used by the FDA to make decisions regarding medical products. Currently, the FDA utilizes over 50 advisory panels that serve the three major FDA centers, including the Centers for Biologics, Drugs and Device Products. Members of an advisory panel typically include academicians, clinicians, consumers, patients, and industry representatives. The FDA establishes the schedules for advisory panel meetings on an annual basis and a panel usually meets several times a year for two consecutive days in Washington, DC. Typically, the advisory panel discusses issues highlighted by the FDA and is then asked to vote a response to the questions posed in advance by the FDA. Advisory panel recommendations have a strong influence on FDA's decision to approve a product, as evidenced by the 214 Advisory Panels FDA convened between January 2008 to November 2012, during which advisory panel members voted to approve the product (or use of the product) ∼74% of the time, with FDA ultimately approving the medical product (or use of the product) ∼79% of the time. The ACG membership are encouraged to consider serving the public's interest by participating in an FDA advisory panel utilizing their expertise for the evaluation of a new drug or medical device, and providing advice about whether the product should be sold in the US.

Comparative Analysis of Reduced-Rule Compressed Fuzzy Logic Control and Incremental Conductance MPPT Methods

NASA Astrophysics Data System (ADS)

Kandemir, Ekrem; Borekci, Selim; Cetin, Numan S.

2018-04-01

Photovoltaic (PV) power generation has been widely used in recent years, with techniques for increasing the power efficiency representing one of the most important issues. The available maximum power of a PV panel is dependent on environmental conditions such as solar irradiance and temperature. To extract the maximum available power from a PV panel, various maximum-power-point tracking (MPPT) methods are used. In this work, two different MPPT methods were implemented for a 150-W PV panel. The first method, known as incremental conductance (Inc. Cond.) MPPT, determines the maximum power by measuring the derivative of the PV voltage and current. The other method is based on reduced-rule compressed fuzzy logic control (RR-FLC), using which it is relatively easier to determine the maximum power because a single input variable is used to reduce computing loads. In this study, a 150-W PV panel system model was realized using these MPPT methods in MATLAB and the results compared. According to the simulation results, the proposed RR-FLC-based MPPT could increase the response rate and tracking accuracy by 4.66% under standard test conditions.

Evaluation of coated columbium alloy heat shields for space shuttle thermal protection system application. Volume 2, phase 2: Subsize heat shield and small size TPS evaluation

NASA Technical Reports Server (NTRS)

Black, W. E.

1973-01-01

Initially a trade study was conducted of seven heat shield configurations. These were evaluated for structural reliability, fabricability, weight, inspectability, and refurbishability. Two concepts, a tee-stiffened and an open corrugation, were selected as offering the most potential for system success. Fourteen subsize heat shields of a full scale section were fabricated from C-129Y and Cb-752 and silicide coated with R-512E. These subsize panels were subjected to a simulated flight profile representing temperature, local surface pressures, and applied pressure differential loads. All corrugated panels of both alloys sustained 100 cycles without structural or coating failure. All Cb-752/R-512E panels performed well with one panel being successfully repaired after 66 cycles and completing 100 cycles. As a result of this evaluating the Cb-752/R-512E system was selected for hardware application during the subsequent phases. In addition, the tee-stiffened configuration was selected for further development and application in Phase III. This selection was based on an overall assessment of relative weight, cost, and structural performance of the tee-stiffened and open corrugation TPS.

Male reproductive disorders, diseases, and costs of exposure to endocrine-disrupting chemicals in the European Union.

PubMed

Hauser, Russ; Skakkebaek, Niels E; Hass, Ulla; Toppari, Jorma; Juul, Anders; Andersson, Anna Maria; Kortenkamp, Andreas; Heindel, Jerrold J; Trasande, Leonardo

2015-04-01

Increasing evidence suggests that endocrine-disrupting chemicals (EDCs) contribute to male reproductive diseases and disorders. To estimate the incidence/prevalence of selected male reproductive disorders/diseases and associated economic costs that can be reasonably attributed to specific EDC exposures in the European Union (EU). An expert panel evaluated evidence for probability of causation using the Intergovernmental Panel on Climate Change weight-of-evidence characterization. Exposure-response relationships and reference levels were evaluated, and biomarker data were organized from carefully identified studies from the peer-reviewed literature to represent European exposure and approximate burden of disease as it occurred in 2010. The cost-of-illness estimation utilized multiple peer-reviewed sources. The expert panel identified low epidemiological and strong toxicological evidence for male infertility attributable to phthalate exposure, with a 40-69% probability of causing 618,000 additional assisted reproductive technology procedures, costing €4.71 billion annually. Low epidemiological and strong toxicological evidence was also identified for cryptorchidism due to prenatal polybrominated diphenyl ether exposure, resulting in a 40-69% probability that 4615 cases result, at a cost of €130 million (sensitivity analysis, €117-130 million). A much more modest (0-19%) probability of causation in testicular cancer by polybrominated diphenyl ethers was identified due to very low epidemiological and weak toxicological evidence, with 6830 potential cases annually and costs of €848 million annually (sensitivity analysis, €313-848 million). The panel assigned 40-69% probability of lower T concentrations in 55- to 64-year-old men due to phthalate exposure, with 24 800 associated deaths annually and lost economic productivity of €7.96 billion. EDCs may contribute substantially to male reproductive disorders and diseases, with nearly €15 billion annual associated costs in the EU. These estimates represent only a few EDCs for which there were sufficient epidemiological studies and those with the highest probability of causation. These public health costs should be considered as the EU contemplates regulatory action on EDCs.

Identification of Strategies to Facilitate Organ Donation among African Americans using the Nominal Group Technique

PubMed Central

Qu, Haiyan; Shewchuk, Richard; Mannon, Roslyn B.; Gaston, Robert; Segev, Dorry L.; Mannon, Elinor C.; Martin, Michelle Y.

2015-01-01

Background and objectives African Americans are disproportionately affected by ESRD, but few receive a living donor kidney transplant. Surveys assessing attitudes toward donation have shown that African Americans are less likely to express a willingness to donate their own organs. Studies aimed at understanding factors that may facilitate the willingness of African Americans to become organ donors are needed. Design, setting, participants, & measurements A novel formative research method was used (the nominal group technique) to identify and prioritize strategies for facilitating increases in organ donation among church-attending African Americans. Four nominal group technique panel interviews were convened (three community and one clergy). Each community panel represented a distinct local church; the clergy panel represented five distinct faith-based denominations. Before nominal group technique interviews, participants completed a questionnaire that assessed willingness to become a donor; 28 African-American adults (≥19 years old) participated in the study. Results In total, 66.7% of participants identified knowledge- or education-related strategies as most important strategies in facilitating willingness to become an organ donor, a view that was even more pronounced among clergy. Three of four nominal group technique panels rated a knowledge-based strategy as the most important and included strategies, such as information on donor involvement and donation-related risks; 29.6% of participants indicated that they disagreed with deceased donation, and 37% of participants disagreed with living donation. Community participants’ reservations about becoming an organ donor were similar for living (38.1%) and deceased (33.4%) donation; in contrast, clergy participants were more likely to express reservations about living donation (33.3% versus 16.7%). Conclusions These data indicate a greater opposition to living donation compared with donation after one’s death among African Americans and suggest that improving knowledge about organ donation, particularly with regard to donor involvement and donation-related risks, may facilitate increases in organ donation. Existing educational campaigns may fall short of meeting information needs of African Americans. PMID:25635038

Identification of strategies to facilitate organ donation among African Americans using the nominal group technique.

PubMed

Locke, Jayme E; Qu, Haiyan; Shewchuk, Richard; Mannon, Roslyn B; Gaston, Robert; Segev, Dorry L; Mannon, Elinor C; Martin, Michelle Y

2015-02-06

African Americans are disproportionately affected by ESRD, but few receive a living donor kidney transplant. Surveys assessing attitudes toward donation have shown that African Americans are less likely to express a willingness to donate their own organs. Studies aimed at understanding factors that may facilitate the willingness of African Americans to become organ donors are needed. A novel formative research method was used (the nominal group technique) to identify and prioritize strategies for facilitating increases in organ donation among church-attending African Americans. Four nominal group technique panel interviews were convened (three community and one clergy). Each community panel represented a distinct local church; the clergy panel represented five distinct faith-based denominations. Before nominal group technique interviews, participants completed a questionnaire that assessed willingness to become a donor; 28 African-American adults (≥19 years old) participated in the study. In total, 66.7% of participants identified knowledge- or education-related strategies as most important strategies in facilitating willingness to become an organ donor, a view that was even more pronounced among clergy. Three of four nominal group technique panels rated a knowledge-based strategy as the most important and included strategies, such as information on donor involvement and donation-related risks; 29.6% of participants indicated that they disagreed with deceased donation, and 37% of participants disagreed with living donation. Community participants' reservations about becoming an organ donor were similar for living (38.1%) and deceased (33.4%) donation; in contrast, clergy participants were more likely to express reservations about living donation (33.3% versus 16.7%). These data indicate a greater opposition to living donation compared with donation after one's death among African Americans and suggest that improving knowledge about organ donation, particularly with regard to donor involvement and donation-related risks, may facilitate increases in organ donation. Existing educational campaigns may fall short of meeting information needs of African Americans. Copyright © 2015 by the American Society of Nephrology.

View of Kotov during a session of EVA on Expedition 15

NASA Image and Video Library

2007-06-06

ISS015-E-10933 (6 June 2007) --- Cosmonaut Oleg V. Kotov, Expedition 15 flight engineer representing Russia's Federal Space Agency, wearing a Russian Orlan spacesuit, uses a digital still camera to expose a photo of his helmet visor during a session of extravehicular activity (EVA). With the Earth in the background, International Space Station solar array panels are also visible in the reflections. Among other tasks, Kotov and cosmonaut Fyodor N. Yurchikhin (out of frame), commander representing Russia's Federal Space Agency, completed the installation of 12 more Zvezda Service Module debris panels and installed sample containers on the Pirs Docking Compartment for a Russian experiment, called Biorisk, which looks at the effect of space on microorganisms.

View of Kotov during a session of EVA on Expedition 15

NASA Image and Video Library

2007-06-06

ISS015-E-10939 (6 June 2007) --- Cosmonaut Oleg V. Kotov, Expedition 15 flight engineer representing Russia's Federal Space Agency, wearing a Russian Orlan spacesuit, uses a digital still camera to expose a photo of his helmet visor during a session of extravehicular activity (EVA). With the Earth in the background, International Space Station solar array panels are also visible in the reflections. Among other tasks, Kotov and cosmonaut Fyodor N. Yurchikhin (out of frame), commander representing Russia's Federal Space Agency, completed the installation of 12 more Zvezda Service Module debris panels and installed sample containers on the Pirs Docking Compartment for a Russian experiment, called Biorisk, which looks at the effect of space on microorganisms.

Molecular profiles: a new tool to substantiate serum banks for evaluation of potential allergenicity of GMO.

PubMed

Barber, D; Rodríguez, R; Salcedo, G

2008-10-01

Assessment of the allergenicity of GMOs involves performing a test with a panel of sera obtained from allergic donors. However, there is no clear indication of how to characterize the above-mentioned panel. The patient selection criteria should take into account the geographical location of patients, the intensity and nature of the environmental allergens in the area and the potential cross-reactivity among allergenic molecules. Sera for serum banks, obtained from patients with demonstrated food allergy, should be subjected to a further characterization by screening with a panel of relevant allergenic molecules. A representative panel of these sera should be used in the allergenicity assessment. Finally, the "in vitro" methodologies should have the adequate specificity and sensitivity, and the integrity of the molecules tested should be guaranteed.

Explaining scene composition using kinematic chains of humans: application to Portuguese tiles history

NASA Astrophysics Data System (ADS)

da Silva, Nuno Pinho; Marques, Manuel; Carneiro, Gustavo; Costeira, João P.

2011-03-01

Painted tile panels (Azulejos) are one of the most representative Portuguese forms of art. Most of these panels are inspired on, and sometimes are literal copies of, famous paintings, or prints of those paintings. In order to study the Azulejos, art historians need to trace these roots. To do that they manually search art image databases, looking for images similar to the representation on the tile panel. This is an overwhelming task that should be automated as much as possible. Among several cues, the pose of humans and the general composition of people in a scene is quite discriminative. We build an image descriptor, combining the kinematic chain of each character, and contextual information about their composition, in the scene. Given a query image, our system computes its similarity profile over the database. Using nearest neighbors in the space of the descriptors, the proposed system retrieves the prints that most likely inspired the tiles' work.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Alexander; Jernigan, Dann A.; Dodd, Amanda B.

New aircraft are being designed with increasing quantities of composite materials used in their construction. Different from the more traditional metals, composites have a higher propensity to burn. This presents a challenge to transportation safety analyses, as the aircraft structure now represents an additional fuel source involved in the fire scenario. Most of the historical fire testing of composite materials is aime d at studying kinetics, flammability or yield strength under fire conditions. Most of this testing is small - scale. Heterogeneous reactions are often length - scale dependent, and this is thought to be particularly true for composites whichmore » exhibit signific ant microscopic dynamics that can affect macro - scale behavior. We have designed a series of tests to evaluate composite materials under various structural loading conditions with a consistent thermal condition. We have measured mass - loss , heat flux, and temperature throughout the experiments. Several types of panels have been tested, including simple composite panels, and sandwich panels. The main objective of the testing was to understand the importance of the structural loading on a composite to its b ehavior in response to fire - like conditions. During flaming combustion at early times, there are some features of the panel decomposition that are unique to the type of loading imposed on the panels. At load levels tested, fiber reaction rates at later t imes appear to be independent of the initial structural loading.« less

Analysis and Design of the NASA Langley Cryogenic Pressure Box

NASA Technical Reports Server (NTRS)

Glass, David E.; Stevens, Jonathan C.; Vause, R. Frank; Winn, Peter M.; Maguire, James F.; Driscoll, Glenn C.; Blackburn, Charles L.; Mason, Brian H.

1999-01-01

A cryogenic pressure box was designed and fabricated for use at NASA Langley Research Center (LaRC) to subject 72 in. x 60 in. curved panels to cryogenic temperatures and biaxial tensile loads. The cryogenic pressure box is capable of testing curved panels down to -423 F (20K) with 54 psig maximum pressure on the concave side, and elevated temperatures and atmospheric pressure on the convex surface. The internal surface of the panel is cooled by high pressure helium as that is cooled to -423 F by liquid helium heat exchangers. An array of twelve independently controlled fans circulate the high pressure gaseous helium to provide uniform cooling on the panel surface. The load introduction structure, consisting of four stainless steel load plates and numerous fingers attaching the load plates to the test panel, is designed to introduce loads into the test panel that represent stresses that will he observed in the actual tank structure. The load plates are trace cooled with liquid nitrogen to reduce thermal gradients that may result in bending the load plates, and thus additional stresses in the test panel. The design of the cryogenic systems, load introduction structure, and control system are discussed in this report.

International Science Policy. A Compilation of Papers Prepared for the 12th Meeting of the Panel on Science and Technology.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science and Technology.

The papers included in this compilation were presented at the 1971 meeting of the Panel on Science and Technology of the U. S. House of Representatives Committee on Science and Astronautics, and concern various aspects of international science policy. The papers include an address by the Secretary of State on "U. S. Foreign Policy in a…

High-Risk Drinking in College: What We Know and What We Need To Learn. Final Report of the Panel on Contexts and Consequences.

ERIC Educational Resources Information Center

National Inst. on Alcohol Abuse and Alcoholism (DHHS), Rockville, MD.

Alcohol on college campuses is not a new problem, but recent concerns have centered on heavy episodic drinking, binge drinking. To address these concerns, the National Advisory Council on Alcohol Abuse and Alcoholism established two panels of nongovernmental experts to help develop a national research agenda. This report represents the work of one…

Evaluation of coated columbium test panels having application to a secondary nozzle extension for the RL10 rocket engine system, parts 1 and 2

NASA Technical Reports Server (NTRS)

Murphy, Kenneth S.; Castro, Joaquin H.

1988-01-01

The activity performed on the screening and evaluation of various coatings for application on columbium alloy test panels representative of a radiation-cooled nozzle extension for the RL10 rocket engine is summarized. Vendors and processes of candidate coatings were evaluated. Post engine test evaluations of the two selected coatings are discussed.

Saving Our Seniors: Preventing Elder Abuse, Neglect, and Exploitation. Hearing before the Special Committee on Aging, United States Senate, One Hundred Seventh Congress, First Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Special Committee on Aging.

In this report of a congressional hearing, testimony includes statements and prepared statements of these four senators: John Breaux, Larry Craig, Debbie Stabenow, and Herbert Kohl. Panel I is presented by the Acting Assistant Attorney General, United States (U.S.) Department of Justice. Panel II consists of individuals representing the National…

Estimating annual medical and out-of-pocket expenditures associated with traumatic injuries in the United States.

PubMed

Alghnam, Suliman; Vanness, David J; Gaskin, Darrell J; Thorpe, Roland J; Castillo, Renan

2016-02-01

Every year, as many as 31 million Americans sustain traumatic injuries, leaving survivors with risks of disabilities and health settings with staggering medical costs. Little is known on the societal burden of injuries in terms of medical and out-of-pocket expenditures. Therefore, we used a nationally representative sample to evaluate the association between injuries and health expenditures among a nationally representative US sample. This study used years 2006 to 2010 (Panels 11-14; n = 53,065) of the Medical Expenditure Panel Survey. Each panel was followed up for 2 years. Total expenditures included insurance payments and out-of-pocket costs. Two-part models were constructed to examine differences in annual medical expenditures between injured and noninjured populations controlling for confounding effects. A total of 4,210 individuals (7.9%) reported injuries representing 21.5 million individuals. Injured individuals were more likely to be males, to be white, and to report higher medical expenditures in the second year than the reference population (p < 0.01). Adjusted analyses showed that reporting any injury was associated with $2,577 (95% confidence interval [CI], $2,049-$3,103) and $186 (95% CI, $142-$230) increase in total and out-of-pocket costs, respectively. While a moderate or severe injury was associated with $4,779 (95% CI, $3,947-$5,610) increase in the average of medical expenditures and $256 (95% CI, $190-$322) increase in out-of-pocket costs adjusting for covariates. Our adjusted national medical cost of injuries was estimated at $56 billion and out-of-pocket cost to be approximately $4 billion. Injuries pose a substantial burden on medical expenditures in the United States. Investment in injury prevention can facilitate reducing medical expenditures and save resources. Prevention programs may use the out-of-pocket findings to highlight injury burden on individual's prosperity and thus facilitate engagement of the public in prevention. Economic and evaluation study, level III.

Integrated smart panel and support structure response

NASA Astrophysics Data System (ADS)

DeGiorgi, Virginia G.

1998-06-01

The performance of smart structures is a complex interaction between active and passive components. Active components, even when non-activated, can have an impact on structural performance and, conversely, structural characteristics of passive components can have a measurable impact on active component performance. The present work is an evaluation of the structural characteristics of an active panel designed for acoustic quieting. The support structure is included in the panel design as evaluated. Finite element methods are used to determine the active panel-support structure response. Two conditions are considered; a hollow unfilled support structure and the same structure filled with a polymer compound. Finite element models were defined so that stiffness values corresponding to the center of individual pistons could be determined. Superelement techniques were used to define mass and stiffness values representative of the combined active and support structure at the center of each piston. Results of interest obtained from the analysis include mode shapes, natural frequencies, and equivalent spring stuffiness for use in structural response models to represent the support structure. The effects on plate motion on piston performance cannot be obtained from this analysis, however mass and stiffness matrices for use in an integrated system model to determine piston head velocities can be obtained from this work.

Comprehensive genetic testing for female and male infertility using next-generation sequencing.

PubMed

Patel, Bonny; Parets, Sasha; Akana, Matthew; Kellogg, Gregory; Jansen, Michael; Chang, Chihyu; Cai, Ying; Fox, Rebecca; Niknazar, Mohammad; Shraga, Roman; Hunter, Colby; Pollock, Andrew; Wisotzkey, Robert; Jaremko, Malgorzata; Bisignano, Alex; Puig, Oscar

2018-05-19

To develop a comprehensive genetic test for female and male infertility in support of medical decisions during assisted reproductive technology (ART) protocols. We developed a next-generation sequencing (NGS) gene panel consisting of 87 genes including promoters, 5' and 3' untranslated regions, exons, and selected introns. In addition, sex chromosome aneuploidies and Y chromosome microdeletions were analyzed concomitantly using the same panel. The NGS panel was analytically validated by retrospective analysis of 118 genomic DNA samples with known variants in loci representative of female and male infertility. Our results showed analytical accuracy of > 99%, with > 98% sensitivity for single-nucleotide variants (SNVs) and > 91% sensitivity for insertions/deletions (indels). Clinical sensitivity was assessed with samples containing variants representative of male and female infertility, and it was 100% for SNVs/indels, CFTR IVS8-5T variants, sex chromosome aneuploidies, and copy number variants (CNVs) and > 93% for Y chromosome microdeletions. Cost analysis shows potential savings when comparing this single NGS assay with the standard approach, which includes multiple assays. A single, comprehensive, NGS panel can simplify the ordering process for healthcare providers, reduce turnaround time, and lower the overall cost of testing for genetic assessment of infertility in females and males, while maintaining accuracy.

Self-rated health, generalized trust, and the Affordable Care Act: A US panel study, 2006-2014.

PubMed

Mewes, Jan; Giordano, Giuseppe Nicola

2017-10-01

Previous research shows that generalized trust, the belief that most people can be trusted, is conducive to people's health. However, only recently have longitudinal studies suggested an additional reciprocal pathway from health back to trust. Drawing on a diverse body of literature that shows how egalitarian social policy contributes to the promotion of generalized trust, we hypothesize that this other 'reverse' pathway could be sensitive to health insurance context. Drawing on nationally representative US panel data from the General Social Survey, we examine whether the Affordable Care Act of 2010 could have had influence on the deteriorating impact of worsening self-rated health (SRH) on generalized trust. Firstly, using two-wave panel data (2008-2010, N = 1403) and employing random effects regression models, we show that a lack of health insurance coverage negatively determines generalized trust in the United States. However, this association is attenuated when additionally controlling for (perceived) income inequality. Secondly, utilizing data from two separate three-wave panel studies from the US General Social Survey (2006-10; N = 1652; 2010-2014; N = 1187), we employ fixed-effects linear regression analyses to control for unobserved heterogeneity from time-invariant factors. We demonstrate that worsening SRH was a stronger predictor for a decrease in generalized trust prior (2006-2010) to the implementation of the Affordable Care Act. Further, the negative effect of fair/poor SRH seen in the 2006-2010 data becomes attenuated in the 2010-2014 panel data. We thus find evidence for a substantial weakening of the previously established negative impact of decreasing SRH on generalized trust, coinciding with the most significant US healthcare reforms in decades. Social policy and healthcare policy implications are discussed. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Progressive Failure Analysis of Composite Stiffened Panels

NASA Technical Reports Server (NTRS)

Bednarcyk, Brett A.; Yarrington, Phillip W.; Collier, Craig S.; Arnold, Steven M.

2006-01-01

A new progressive failure analysis capability for stiffened composite panels has been developed based on the combination of the HyperSizer stiffened panel design/analysis/optimization software with the Micromechanics Analysis Code with Generalized Method of Cells (MAC/GMC). MAC/GMC discretizes a composite material s microstructure into a number of subvolumes and solves for the stress and strain state in each while providing the homogenized composite properties as well. As a result, local failure criteria may be employed to predict local subvolume failure and the effects of these local failures on the overall composite response. When combined with HyperSizer, MAC/GMC is employed to represent the ply level composite material response within the laminates that constitute a stiffened panel. The effects of local subvolume failures can then be tracked as loading on the stiffened panel progresses. Sample progressive failure results are presented at both the composite laminate and the composite stiffened panel levels. Deformation and failure model predictions are compared with experimental data from the World Wide Failure Exercise for AS4/3501-6 graphite/epoxy laminates.

Panel methods: An introduction

NASA Technical Reports Server (NTRS)

Erickson, Larry L.

1990-01-01

Panel methods are numerical schemes for solving (the Prandtl-Glauert equation) for linear, inviscid, irrotational flow about aircraft flying at subsonic or supersonic speeds. The tools at the panel-method user's disposal are (1) surface panels of source-doublet-vorticity distributions that can represent nearly arbitrary geometry, and (2) extremely versatile boundary condition capabilities that can frequently be used for creative modeling. Panel-method capabilities and limitations, basic concepts common to all panel-method codes, different choices that were made in the implementation of these concepts into working computer programs, and various modeling techniques involving boundary conditions, jump properties, and trailing wakes are discussed. An approach for extending the method to nonlinear transonic flow is also presented. Three appendices supplement the main test. In appendix 1, additional detail is provided on how the basic concepts are implemented into a specific computer program (PANAIR). In appendix 2, it is shown how to evaluate analytically the fundamental surface integral that arises in the expressions for influence-coefficients, and evaluate its jump property. In appendix 3, a simple example is used to illustrate the so-called finite part of the improper integrals.

NIH Consensus Conference. Acupuncture.

PubMed

1998-11-04

To provide clinicians, patients, and the general public with a responsible assessment of the use and effectiveness of acupuncture to treat a variety of conditions. A nonfederal, nonadvocate, 12-member panel representing the fields of acupuncture, pain, psychology, psychiatry, physical medicine and rehabilitation, drug abuse, family practice, internal medicine, health policy, epidemiology, statistics, physiology, biophysics, and the representatives of the public. In addition, 25 experts from these same fields presented data to the panel and a conference audience of 1200. Presentations and discussions were divided into 3 phases over 2 1/2 days: (1) presentations by investigators working in areas relevant to the consensus questions during a 2-day public session; (2) questions and statements from conference attendees during open discussion periods that were part of the public session; and (3) closed deliberations by the panel during the remainder of the second day and morning of the third. The conference was organized and supported by the Office of Alternative Medicine and the Office of Medical Applications of Research, National Institutes of Health, Bethesda, Md. The literature, produced from January 1970 to October 1997, was searched through MEDLINE, Allied and Alternative Medicine, EMBASE, and MANTIS, as well as through a hand search of 9 journals that were not indexed by the National Library of Medicine. An extensive bibliography of 2302 references was provided to the panel and the conference audience. Expert speakers prepared abstracts of their own conference presentations with relevant citations from the literature. Scientific evidence was given precedence over clinical anecdotal experience. The panel, answering predefined questions, developed their conclusions based on the scientific evidence presented in the open forum and scientific literature. The panel composed a draft statement, which was read in its entirety and circulated to the experts and the audience for comment. Thereafter, the panel resolved conflicting recommendations and released a revised statement at the end of the conference. The panel finalized the revisions within a few weeks after the conference. The draft statement was made available on the World Wide Web immediately following its release at the conference and was updated with the panel's final revisions within a few weeks of the conference. The statement is available at http://consensus.nih.gov. Acupuncture as a therapeutic intervention is widely practiced in the United States. Although there have been many studies of its potential usefulness, many of these studies provide equivocal results because of design, sample size, and other factors. The issue is further complicated by inherent difficulties in the use of appropriate controls, such as placebos and sham acupuncture groups. However, promising results have emerged, for example, showing efficacy of acupuncture in adult postoperative and chemotherapy nausea and vomiting and in postoperative dental pain. There are other situations, such as addiction, stroke rehabilitation, headache, menstrual cramps, tennis elbow, fibromyalgia, myofascial pain, osteoarthritis, low back pain, carpal tunnel syndrome, and asthma, in which acupuncture may be useful as an adjunct treatment or an acceptable alternative or be included in a comprehensive management program. Further research is likely to uncover additional areas where acupuncture interventions will be useful.

Conceptual Design Studies of Composite AMST

DTIC Science & Technology

1974-10-01

WEIGHT OF THE AIRFRAME THE PROPERTIES OF HIGH -STRENGTH GRAPHITE-EPOXY COMPOSITES (REPRESENTATIVE OF THORNEL 300 FIBERS) WERE USED IN THE APPLICATION...The primary advanced composite material selected was a high -strength graphite-epoxy (Thornel 300/Narmco 5208). Boron-infiltrated aluminum extrusions...Figure Page 25 Trimming Irregular Cutouts in Wing Box Attach Angles ...... 71 26 Hydroforming W-Truss Web Beaded Panels ................ 72 27 Exploded

The Longitudinal Causal Directionality between Body Image Distress and Self-Esteem among Korean Adolescents: The Moderating Effect of Relationships with Parents

ERIC Educational Resources Information Center

Park, Woochul; Epstein, Norman B.

2013-01-01

This study examined the longitudinal relationship between self-esteem and body image distress, as well as the moderating effect of relationships with parents, among adolescents in Korea, using nationally representative prospective panel data. Regarding causal direction, the findings supported bi-directionality for girls, but for boys the…

Crew Launch Vehicle (CLV) Avionics and Software Integration Overview

NASA Technical Reports Server (NTRS)

Monell, Donald W.; Flynn, Kevin C.; Maroney, Johnny

2006-01-01

On January 14, 2004, the President of the United States announced a new plan to explore space and extend a human presence across our solar system. The National Aeronautics and Space Administration (NASA) established the Exploration Systems Mission Directorate (ESMD) to develop and field a Constellation Architecture that will bring the Space Exploration vision to fruition. The Constellation Architecture includes a human-rated Crew Launch Vehicle (CLV) segment, managed by the Marshall Space Flight Center (MSFC), comprised of the First Stage (FS), Upper Stage (US), and Upper Stage Engine (USE) elements. The CLV s purpose is to provide safe and reliable crew and cargo transportation into Low Earth Orbit (LEO), as well as insertion into trans-lunar trajectories. The architecture's Spacecraft segment includes, among other elements, the Crew Exploration Vehicle (CEV), managed by the Johnson Space Flight Center (JSC), which is launched atop the CLV. MSFC is also responsible for CLV and CEV stack integration. This paper provides an overview of the Avionics and Software integration approach (which includes the Integrated System Health Management (ISHM) functions), both within the CLV, and across the CEV interface; it addresses the requirements to be met, logistics of meeting those requirements, and the roles of the various groups. The Avionics Integration and Vehicle Systems Test (ANST) Office was established at the MSFC with system engineering responsibilities for defining and developing the integrated CLV Avionics and Software system. The AIVST Office has defined two Groups, the Avionics and Software Integration Group (AVSIG), and the Integrated System Simulation and Test Integration Group (ISSTIG), and four Panels which will direct trade studies and analyses to ensure the CLV avionics and software meet CLV system and CEV interface requirements. The four panels are: 1) Avionics Integration Panel (AIP), 2) Software Integration Panel, 3) EEE Panel, and 4) Systems Simulation and Test Panel. Membership on the groups and panels includes the MSFC representatives from the requisite engineering disciplines, the First Stage, the Upper Stage, the Upper Stage Engine projects, and key personnel from other NASA centers. The four panels will take the results of trade studies and analyses and develop documentation in support of Design Analysis Cycle Reviews and ultimately the System Requirements Review.

A new checkerboard panel for testing bacterial markers in periodontal disease.

PubMed

Dahlén, G; Leonhardt, A

2006-02-01

Various microbiological methods have been used for testing bacterial markers for periodontitis and periodontal disease progression. Most studies have used only a limited number of well recognized bacterial species. The purpose of the present study was to evaluate the association of 13 more recently identified bacterial species in a new panel in comparison with 12 previously more recognized periodontotopathogens ('old panel') using the 'checkerboard' DNA-DNA hybridization method. Fifty individuals were chosen who showed at least one site with a probing pocket depth of 6 mm or more (disease) and bleeding on probing and at least one site with a probing pocket depth of 3 mm and without bleeding on probing (health). One diseased and one healthy site on each individual were sampled with the paperpoint technique and the samples were processed in the checkerboard technique against deoxigenin-labeled whole genomic probes to 25 subgingival species representing 12 well recognized and 13 newly identified periodontitis associated species. Twenty-four (out of 25) species were detected more frequently in the subgingival plaque of diseased than healthy sites both at score 1 (> 10(4)) and score 3 (> 10(5)). A significant difference at the higher score (score 3) was noticed for all species of the old panel except for three (Streptococcus intermedius, Selenomonas noxia, and Eikenella corrodens). Of the species in the new panel only Prevotella tannerae, Filifactor alocis, and Porphyromonas endodontalis showed a statistical significant difference between diseased and healthy sites. It was concluded that P. tannerae, F. alocis, and P. endodontalis should be added to the 12 species used for routine diagnostics of periodontitis-associated bacterial flora.

Dose-Response Relation between Work Hours and Cardiovascular Disease Risk: Findings from the Panel Study of Income Dynamics

PubMed Central

Conway, Sadie H.; Pompeii, Lisa A.; Roberts, Robert E.; Follis, Jack L.; Gimeno, David

2015-01-01

Objectives To examine the presence of a dose-response relationship between work hours and incident cardiovascular disease (CVD) in a representative sample of U.S. workers. Methods Retrospective cohort study of 1,926 individuals from the Panel Study of Income Dynamics (1986–2011) employed for at least 10 years. Restricted cubic spline regression was used to estimate the dose-response relationship of work hours with CVD. Results A dose-response relationship was observed in which an average workweek of 46 hours or more for at least 10 years was associated with increased risk of CVD. Compared to working 45 hours per week, working an additional 10 hours per week or more for at least 10 years increased CVD risk by at least 16%. Conclusions Working more than 45 work hours per week for at least 10 years may be an independent risk factor for CVD. PMID:26949870

The utility of low-density genotyping for imputation in the Thoroughbred horse

PubMed Central

2014-01-01

Background Despite the dramatic reduction in the cost of high-density genotyping that has occurred over the last decade, it remains one of the limiting factors for obtaining the large datasets required for genomic studies of disease in the horse. In this study, we investigated the potential for low-density genotyping and subsequent imputation to address this problem. Results Using the haplotype phasing and imputation program, BEAGLE, it is possible to impute genotypes from low- to high-density (50K) in the Thoroughbred horse with reasonable to high accuracy. Analysis of the sources of variation in imputation accuracy revealed dependence both on the minor allele frequency of the single nucleotide polymorphisms (SNPs) being imputed and on the underlying linkage disequilibrium structure. Whereas equidistant spacing of the SNPs on the low-density panel worked well, optimising SNP selection to increase their minor allele frequency was advantageous, even when the panel was subsequently used in a population of different geographical origin. Replacing base pair position with linkage disequilibrium map distance reduced the variation in imputation accuracy across SNPs. Whereas a 1K SNP panel was generally sufficient to ensure that more than 80% of genotypes were correctly imputed, other studies suggest that a 2K to 3K panel is more efficient to minimize the subsequent loss of accuracy in genomic prediction analyses. The relationship between accuracy and genotyping costs for the different low-density panels, suggests that a 2K SNP panel would represent good value for money. Conclusions Low-density genotyping with a 2K SNP panel followed by imputation provides a compromise between cost and accuracy that could promote more widespread genotyping, and hence the use of genomic information in horses. In addition to offering a low cost alternative to high-density genotyping, imputation provides a means to combine datasets from different genotyping platforms, which is becoming necessary since researchers are starting to use the recently developed equine 70K SNP chip. However, more work is needed to evaluate the impact of between-breed differences on imputation accuracy. PMID:24495673

Perceptions regarding workplace hazards at a veterinary teaching hospital.

PubMed

Weaver, Dustin R; Newman, Lee S; Lezotte, Dennis C; Morley, Paul S

2010-07-01

To assess perceptions of personnel working at a veterinary teaching hospital regarding risks of occupational hazards and compare those perceptions with assessments made by occupational safety experts. Cross-sectional study. A representative sample of personnel (n = 90) working at the veterinary teaching hospital at Colorado State University and a panel of 3 occupational safety experts. Hospital personnel ranked perceptions of 14 physical, chemical, and biological workplace hazards and listed the injuries, illnesses, and near misses they had experienced. The expert panel provided consensus rankings of the same 14 hazards for 9 sections of the facility. Risk perceptions provided by the 2 sources were compared. Risk perceptions did not differ significantly between hospital personnel and the expert panel for most of the site-specific comparisons (94/126 [75%]). Personnel perceived greater risks for some physical hazards (loud noises, sharps injuries, and ionizing radiation) and some chemical or materials exposures (insecticides or pesticides and tissue digester emissions). In contrast, the expert panel perceived greater risks for physical hazards (bite or crush and restraining and moving animals), chemical exposures (anesthetic waste gas), and biological exposures (Toxoplasma gondii, antimicrobial-resistant bacteria, and allergens). Participants and safety experts had similar perceptions about occupational risks, but there were important differences where hospital personnel apparently overestimated or underappreciated the risks for workplace hazards. This type of study may be useful in guiding development of optimal workplace safety programs for veterinary hospitals.

Estimating the effects of wages on obesity.

PubMed

Kim, DaeHwan; Leigh, John Paul

2010-05-01

To estimate the effects of wages on obesity and body mass. Data on household heads, aged 20 to 65 years, with full-time jobs, were drawn from the Panel Study of Income Dynamics for 2003 to 2007. The Panel Study of Income Dynamics is a nationally representative sample. Instrumental variables (IV) for wages were created using knowledge of computer software and state legal minimum wages. Least squares (linear regression) with corrected standard errors were used to estimate the equations. Statistical tests revealed both instruments were strong and tests for over-identifying restrictions were favorable. Wages were found to be predictive (P < 0.05) of obesity and body mass in regressions both before and after applying IVs. Coefficient estimates suggested stronger effects in the IV models. Results are consistent with the hypothesis that low wages increase obesity prevalence and body mass.

An Evaluation of Frangible Materials as Veneers on Vented Structural Member Designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jameson, Kevin Jay

2015-10-01

Literature shows there has been extensive research and testing done in the area of wall panels and frangible materials. There is evidence from past research that shows it is possible to vent a structure that has had an accidental internal explosion [1]. The reviewed literature shows that most designs vent the entire wall panel versus a frangible material attached to the wall panel. The frangible material attachment points are important to determine the overall loading of the wall panel structure [2]. The materials used in the reviewed literature were securely attached as well as strong enough to remain intact duringmore » the pressure loading to move the entire wall panel. Since the vented wall panel was the weakest part of the overall structure, the other walls of the structure were substantially larger. The structure was usually built from concrete and large amounts of steel with dirt and sand over the top of the structure.The study will be conducted at Sandia National Laboratories located in Albuquerque New Mexico. The skeletal structural design for evaluation is a rectangular frame with a square grid pattern constructed from steel. The skeletal structure has been given to the researcher as a design requirement. The grid pattern will be evaluated strictly on plastic deformation and the loading that is applied from the frangible material. The frangible material tested will either fit into the grid or will be a veneer lightly attached to the structure frame. The frangible material may be required on both sides of the structure to adequately represent the application.« less

An assessment of buffer strips for improving damage tolerance of composite laminates at elevated temperature

NASA Technical Reports Server (NTRS)

Bigelow, C. A.

1981-01-01

Buffer strips greatly improve the damage tolerance of graphite/epoxy laminates loaded in tension. Graphite/polyimide buffer strip panels were made and tested to determine their residual strength at ambient and elevated (177 C) temperature. Each panel was cut in the center to represent damage. Panels were radiographed and crack-opening displacements were recorded to indicate fracture, fracture arrest, and the extent of damage in the buffer strip after arrest. All panels had the same buffer strip spacing and width. The buffer strip material was 0 deg S-glass/PMR-15. The buffer strips were made by replacing narrow strips of the 0 deg graphite plies with strips of the 0 deg S-glass on either a one-for-one or a two-for-one basis. Half of the panels were heated to 177 + or - 3 C before and during the testing. Elevated temperature did not alter the fracture behavior of the buffer configuration.

Evaluation of superplastic forming and co-diffusion bonding of Ti-6Al-4V titanium alloy expanded sandwich structures

NASA Technical Reports Server (NTRS)

Arvin, G. H.; Israeli, L.; Stolpestad, J. H.; Stacher, G. W.

1981-01-01

The application of the superplastic forming/diffusion bonding (SPF/DB) process to supersonic cruise research is investigated. The capability of an SPF/DB titanium structure to meet the structural requirements of the inner wing area of the NASA arrow-wing advanced supersonic transport design is evaluated. Selection of structural concepts and their optimization for minimum weight, SPF/DB process optimization, fabrication of representative specimens, and specimen testing and evaluation are described. The structural area used includes both upper and lower wing panels, where the upper wing panel is used for static compression strength evaluation and the lower panel, in tension, is used for fracture mechanics evaluations. The individual test specimens, cut from six large panels, consist of 39 static specimens, 10 fracture mechanics specimens, and one each full size panel for compression stability and fracture mechanics testing. Tests are performed at temperatures of -54 C (-65 F), room temperature, and 260 C (500 F).

Blood RNA biomarker panel detects both left- and right-sided colorectal neoplasms: a case-control study.

PubMed

Chao, Samuel; Ying, Jay; Liew, Gailina; Marshall, Wayne; Liew, Choong-Chin; Burakoff, Robert

2013-07-23

Colonoscopy is widely regarded to be the gold standard for colorectal cancer (CRC) detection. Recent studies, however, suggest that the effectiveness of colonoscopy is mostly confined to tumors on the left side of the colon (descending, sigmoid, rectum), and that the technology has poor tumor detection for right-sided (cecum, ascending, transverse) lesions. A minimally invasive test that can detect both left-sided and right-sided lesions could increase the effectiveness of screening colonoscopy by revealing the potential presence of neoplasms in the right-sided "blind spot". We previously reported on a seven-gene, blood-based biomarker panel that effectively stratifies a patient's risk of having CRC. For the current study, we assessed the effectiveness of the seven-gene panel for the detection of left- and right-sided CRC lesions. Results were evaluated for 314 patients with CRC (left-sided: TNM I, 65; TNM II, 57; TNM III, 60; TNM IV, 17; unknown, 9. right-sided: TNM I, 28; TNM II, 29; TNM III, 38; TNM IV, 12; unknown, 1 and including two samples with both left and right lesions) and 328 control samples. Blood samples were obtained prior to clinical staging and therapy. Most CRC subjects had localized disease (stages I and II, 58%); regional (stage III) and systemic (stage IV) disease represented 32% and 9%, respectively, of the study population. The panel detected left-sided (74%, 154/208) and right-sided (85%, 92/108) lesions with an overall sensitivity of 78% (215/316) at a specificity of 66% (215/328). Treatable cancer (stages I to III) was detected with left-sided lesion sensitivity of 76% (138/182) and right-sided sensitivity of 84% (80/95). This seven-gene biomarker panel detected right-sided CRC lesions across all cancer stages with a sensitivity that is at least equal to that for left-sided lesions. This study supports the use of this panel as the basis for a patient-friendly, blood-based test that can be easily incorporated into a routine physical examination in advance of colonoscopy to provide a convenient companion diagnostic and a pre-screening alert, ultimately leading to enhanced CRC screening effectiveness.

Recommendations for numerical solution of reinforced-panel and fuselage-ring problems

NASA Technical Reports Server (NTRS)

Hoff, N J; Libby, Paul A

1949-01-01

Procedures are recommended for solving the equations of equilibrium of reinforced panels and isolated fuselage rings as represented by the external loads and the operations table established according to Southwell's method. From the solution of these equations the stress distribution can be easily determined. The method of systematic relaxations, the matrix-calculus method, and several other methods applicable in special cases are discussed. Definite recommendations are made for obtaining the solution of reinforced-panel problems which are generally designated as shear lag problems. The procedures recommended are demonstrated in the analysis of a number of panels. In the case of fuselage rings it is not possible to make definite recommendations for the solution of the equilibrium equations for all rings and loadings. However, suggestions based on the latest experience are made and demonstrated on several rings.

Neutral buoyancy test evaluation of hardware and extravehicular activity procedures for on-orbit assembly of a 14 meter precision reflector

NASA Technical Reports Server (NTRS)

Heard, Walter L., Jr.; Lake, Mark S.

1993-01-01

A procedure that enables astronauts in extravehicular activity (EVA) to perform efficient on-orbit assembly of large paraboloidal precision reflectors is presented. The procedure and associated hardware are verified in simulated Og (neutral buoyancy) assembly tests of a 14 m diameter precision reflector mockup. The test article represents a precision reflector having a reflective surface which is segmented into 37 individual panels. The panels are supported on a doubly curved tetrahedral truss consisting of 315 struts. The entire truss and seven reflector panels were assembled in three hours and seven minutes by two pressure-suited test subjects. The average time to attach a panel was two minutes and three seconds. These efficient assembly times were achieved because all hardware and assembly procedures were designed to be compatible with EVA assembly capabilities.

2015 Dust Risk Standing Review Panel

NASA Technical Reports Server (NTRS)

Steinberg, Susan

2015-01-01

The 2015 Dust Risk Standing Review Panel (SRP) participated in a WebEx/teleconference with members of the Space Human Factors and Habitability (SHFH) Element, representatives from the Human Research Program (HRP), NASA Headquarters, and the NASA Research Education and Support Services on November 12, 2015. The SRP reviewed the updated Evidence Report for The Risk of Adverse Health and Performance Effects of Celestial Dust Exposure, as well as the Research Plan for this Risk.

A specification of 3D manipulation in virtual environments

NASA Technical Reports Server (NTRS)

Su, S. Augustine; Furuta, Richard

1994-01-01

In this paper we discuss the modeling of three basic kinds of 3-D manipulations in the context of a logical hand device and our virtual panel architecture. The logical hand device is a useful software abstraction representing hands in virtual environments. The virtual panel architecture is the 3-D component of the 2-D window systems. Both of the abstractions are intended to form the foundation for adaptable 3-D manipulation.

The Management of Information & Knowledge; Meeting of the Panel on Science and Technology with the Committee on Science and Astronautics, U.S. House of Representatives.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science and Technology.

The emphasis of the eleventh meeting of the Panel on Science and Technology was on the management of information and knowledge. It was organized essentially as a seminar with two papers given at each session. The topic of the first two papers presented was: "Computers, Communications, and the Economy." The papers given at the second session were…

Emissions and Noise Pervasive Panel

NASA Technical Reports Server (NTRS)

Henderson, Brenda; Lee, Chi

2008-01-01

Objectives include: Provide interagency coordination of technology development, aimed at engine noise reduction. a) Provide recommendations to the Steering Committee on potential areas of interagency technology collaboration to maximize the use of government investments in noise reduction. b) Serve as a forum for information and technology exchange in order to coordinate gas turbine engine environmental strategies and policies among the member agencies and industry; c) Coordinate activities across panel representatives; and d) Communicate progress to VAATE steering committee.

Prototype space erectable radiator system ground test article development

NASA Technical Reports Server (NTRS)

Alario, Joseph P.

1988-01-01

A prototype heat rejecting system is being developed by NASA-JSC for possible space station applications. This modular system, the Space-Erectable Radiator System Ground Test Article (SERS-GTA) with high-capacity radiator panels, can be installed and replaced on-orbit. The design, fabrication and testing of a representative ground test article are discussed. Acceptance test data for the heat pipe radiator panel and the whiffletree clamping mechanism have been presented.

Improve T Cell Therapy in Neuroblastoma

DTIC Science & Technology

2015-09-01

bioluminescence was then measured overtime. The graph is representative of one of 4 experiments using CMV-CTLs from 4 donors. Panel E. Kaplan-Meier...whole-cell vaccine expressing the iC9 gene and labeled with an enhanced firefly luciferase. Tumor growth was measured by in vivo imaging. Panel E...down regulation in LTE -T cells is not caused by specific culture conditions. T lymphocytes were activated with immobilized OKT3 (1 μg ml) and

Parametric study of guided waves dispersion curves for composite plates

NASA Astrophysics Data System (ADS)

Predoi, Mihai Valentin; Petre, Cristian Cǎtǎlin; Kettani, Mounsif Ech Cherif El; Leduc, Damien

2018-02-01

Nondestructive testing of composite panels benefit from the relatively long range propagation of guided waves in sandwich structures. The guided waves are sensitive to delamination, air bubbles inclusions and cracks and can thus bring information about hidden defects in the composite panel. The preliminary data in all such inspections is represented by the dispersion curves, representing the dependency of the phase/group velocity on the frequency for the propagating modes. In fact, all modes are more or less attenuated, so it is even more important to compute the dispersion curves, which provide also the modal attenuation as function of frequency. Another important aspect is the sensitivity of the dispersion curves on each of the elastic constant of the composite, which are orthotropic in most cases. All these aspects are investigated in the present work, based on our specially developed finite element numerical model implemented in Comsol, which has several advantages over existing methods. The dispersion curves and modal displacements are computed for an example of composite plate. Comparison with literature data validates the accuracy of our results.

Imaging Algorithms for Evaluating Suspected Rotator Cuff Disease: Society of Radiologists in Ultrasound Consensus Conference Statement

PubMed Central

Jacobson, Jon A.; Benson, Carol B.; Bancroft, Laura W.; Bedi, Asheesh; McShane, John M.; Miller, Theodore T.; Parker, Laurence; Smith, Jay; Steinbach, Lynne S.; Teefey, Sharlene A.; Thiele, Ralf G.; Tuite, Michael J.; Wise, James N.; Yamaguchi, Ken

2013-01-01

The Society of Radiologists in Ultrasound convened a panel of specialists from a variety of medical disciplines to reach a consensus about the recommended imaging evaluation of painful shoulders with clinically suspected rotator cuff disease. The panel met in Chicago, Ill, on October 18 and 19, 2011, and created this consensus statement regarding the roles of radiography, ultrasonography (US), computed tomography (CT), CT arthrography, magnetic resonance (MR) imaging, and MR arthrography. The consensus panel consisted of two co-moderators, a facilitator, a statistician and health care economist, and 10 physicians who have specialty expertise in shoulder pain evaluation and/or treatment. Of the 13 physicians on the panel, nine were radiologists who were chosen to represent a broad range of skill sets in diagnostic imaging, different practice types (private and academic), and different geographical regions of the United States. Five of the radiologists routinely performed musculoskeletal US as part of their practice and four did not. There was also one representative from each of the following clinical specialties: rheumatology, physical medicine and rehabilitation, orthopedic surgery, and nonoperative sports medicine. The goal of this conference was to construct several algorithms with which to guide the imaging evaluation of suspected rotator cuff disease in patients with a native rotator cuff, patients with a repaired rotator cuff, and patients who have undergone shoulder replacement. The panel hopes that these recommendations will lead to greater uniformity in rotator cuff imaging and more cost-effective care for patients suspected of having rotator cuff abnormality. © RSNA, 2013 PMID:23401583

The Visible Human Project of the National Library of Medicine: Remote access and distribution of a multi-gigabyte data set

NASA Technical Reports Server (NTRS)

Ackerman, Michael J.

1993-01-01

As part of the 1986 Long-Range Plan for the National Library of Medicine (NLM), the Planning Panel on Medical Education wrote that NLM should '...thoroughly and systematically investigate the technical requirements for and feasibility of instituting a biomedical images library.' The panel noted the increasing use of images in clinical practice and biomedical research. An image library would complement NLM's existing bibliographic and factual database services and would ideally be available through the same computer networks as are these current NLM services. Early in 1989, NLM's Board of Regents convened an ad hoc planning panel to explore possible roles for the NLM in the area of electronic image libraries. In its report to the Board of Regents, the NLM Planning Panel on Electronic Image Libraries recommended that 'NLM should undertake a first project building a digital image library of volumetric data representing a complete, normal adult male and female. This Visible Human Project will include digitized photographic images for cryosectioning, digital images derived from computerized tomography, and digital magnetic resonance images of cadavers.' The technologies needed to support digital high resolution image libraries, including rapid development; and that NLM encourage investigator-initiated research into methods for representing and linking spatial and textual information, structural informatics. The first part of the Visible Human Project is the acquisition of cross-sectional CT and MRI digital images and cross-sectional cryosectional photographic images of a representative male and female cadaver at an average of one millimeter intervals. The corresponding cross-sections in each of the three modalities are to be registerable with one another.

Improved recognition of figures containing fluorescence microscope images in online journal articles using graphical models.

PubMed

Qian, Yuntao; Murphy, Robert F

2008-02-15

There is extensive interest in automating the collection, organization and analysis of biological data. Data in the form of images in online literature present special challenges for such efforts. The first steps in understanding the contents of a figure are decomposing it into panels and determining the type of each panel. In biological literature, panel types include many kinds of images collected by different techniques, such as photographs of gels or images from microscopes. We have previously described the SLIF system (http://slif.cbi.cmu.edu) that identifies panels containing fluorescence microscope images among figures in online journal articles as a prelude to further analysis of the subcellular patterns in such images. This system contains a pretrained classifier that uses image features to assign a type (class) to each separate panel. However, the types of panels in a figure are often correlated, so that we can consider the class of a panel to be dependent not only on its own features but also on the types of the other panels in a figure. In this article, we introduce the use of a type of probabilistic graphical model, a factor graph, to represent the structured information about the images in a figure, and permit more robust and accurate inference about their types. We obtain significant improvement over results for considering panels separately. The code and data used for the experiments described here are available from http://murphylab.web.cmu.edu/software.

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel. Part 3; 8-ply Out-of-Autoclave Facesheets

NASA Technical Reports Server (NTRS)

Pineda, Evan J.; Myers, David E.; Kosareo, Daniel N.; Kellas, Sotiris

2014-01-01

Four honeycomb sandwich panels, representing 1/16th arc segments of a 10 m diameter barrel section of the heavy lift launch vehicle, were manufactured under the NASA Composites for Exploration program and the NASA Constellation Ares V program. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.000 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: inautoclave IM7/977-3 and out-of-autoclave T40-800B/5320-1. Smaller 3- by 5-ft panels were cut from the 1/16th barrel sections. These panels were tested under compressive loading at the NASA Langley Research Center. Furthermore, linear eigenvalue and geometrically nonlinear finite element analyses were performed to predict the compressive response of the 3- by 5-ft panels. This manuscript summarizes the experimental and analytical modeling efforts pertaining to the panel composed of 8-ply, T40-800B/5320-1 facesheets (referred to as Panel C). To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear, two-dimensional (2-D) and three-dimensional (3-D), models yield good qualitative and quantitative predictions. Additionally, it was predicted correctly that the panel would fail in buckling prior to failing in strength.

Characterization of small-to-medium head-and-face dimensions for developing respirator fit test panels and evaluating fit of filtering facepiece respirators with different faceseal design

PubMed Central

Lin, Yi-Chun

2017-01-01

A respirator fit test panel (RFTP) with facial size distribution representative of intended users is essential to the evaluation of respirator fit for new models of respirators. In this study an anthropometric survey was conducted among youths representing respirator users in mid-Taiwan to characterize head-and-face dimensions key to RFTPs for application to small-to-medium facial features. The participants were fit-tested for three N95 masks of different facepiece design and the results compared to facial size distribution specified in the RFTPs of bivariate and principal component analysis design developed in this study to realize the influence of facial characteristics to respirator fit in relation to facepiece design. Nineteen dimensions were measured for 206 participants. In fit testing the qualitative fit test (QLFT) procedures prescribed by the U.S. Occupational Safety and Health Administration were adopted. As the results show, the bizygomatic breadth of the male and female participants were 90.1 and 90.8% of their counterparts reported for the U.S. youths (P < 0.001), respectively. Compared to the bivariate distribution, the PCA design better accommodated variation in facial contours among different respirator user groups or populations, with the RFTPs reported in this study and from literature consistently covering over 92% of the participants. Overall, the facial fit of filtering facepieces increased with increasing facial dimensions. The total percentages of the tests wherein the final maneuver being completed was “Moving head up-and-down”, “Talking” or “Bending over” in bivariate and PCA RFTPs were 13.3–61.9% and 22.9–52.8%, respectively. The respirators with a three-panel flat fold structured in the facepiece provided greater fit, particularly when the users moved heads. When the facial size distribution in a bivariate RFTP did not sufficiently represent petite facial size, the fit testing was inclined to overestimate the general fit, thus for small-to-medium facial dimensions a distinct RFTP should be considered. PMID:29176833

Characterization of small-to-medium head-and-face dimensions for developing respirator fit test panels and evaluating fit of filtering facepiece respirators with different faceseal design.

PubMed

Lin, Yi-Chun; Chen, Chen-Peng

2017-01-01

A respirator fit test panel (RFTP) with facial size distribution representative of intended users is essential to the evaluation of respirator fit for new models of respirators. In this study an anthropometric survey was conducted among youths representing respirator users in mid-Taiwan to characterize head-and-face dimensions key to RFTPs for application to small-to-medium facial features. The participants were fit-tested for three N95 masks of different facepiece design and the results compared to facial size distribution specified in the RFTPs of bivariate and principal component analysis design developed in this study to realize the influence of facial characteristics to respirator fit in relation to facepiece design. Nineteen dimensions were measured for 206 participants. In fit testing the qualitative fit test (QLFT) procedures prescribed by the U.S. Occupational Safety and Health Administration were adopted. As the results show, the bizygomatic breadth of the male and female participants were 90.1 and 90.8% of their counterparts reported for the U.S. youths (P < 0.001), respectively. Compared to the bivariate distribution, the PCA design better accommodated variation in facial contours among different respirator user groups or populations, with the RFTPs reported in this study and from literature consistently covering over 92% of the participants. Overall, the facial fit of filtering facepieces increased with increasing facial dimensions. The total percentages of the tests wherein the final maneuver being completed was "Moving head up-and-down", "Talking" or "Bending over" in bivariate and PCA RFTPs were 13.3-61.9% and 22.9-52.8%, respectively. The respirators with a three-panel flat fold structured in the facepiece provided greater fit, particularly when the users moved heads. When the facial size distribution in a bivariate RFTP did not sufficiently represent petite facial size, the fit testing was inclined to overestimate the general fit, thus for small-to-medium facial dimensions a distinct RFTP should be considered.

30 CFR 250.191 - How does MMS conduct incident investigations?

Code of Federal Regulations, 2011 CFR

2011-07-01

... following requirements apply to any panel meetings involving persons giving testimony: (a) A person giving testimony may have legal or other representative(s) present to provide advice or counsel while the person is giving testimony. The chairperson may require a verbatim transcript to be made of all oral testimony. The...

75 FR 15714 - Voting and Nonvoting Consumer Representative Members on Public Advisory Committees and Panels...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0001... Public Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice of public meeting. The Food and... consumer interests on how to participate in the nomination and selection process for members representing...

Design and Analysis of a Stiffened Composite Fuselage Panel

NASA Technical Reports Server (NTRS)

Dickson, J. N.; Biggers, S. B.

1980-01-01

A stiffened composite panel has been designed that is representative of the fuselage structure of existing wide bodied aircraft. The panel is a minimum weight design, based on the current level of technology and realistic loads and criteria. Several different stiffener configurations were investigated in the optimization process. The final configuration is an all graphite epoxy J-stiffened design in which the skin between adjacent stiffeners is permitted to buckle under design loads. Fail-safe concepts typically employed in metallic fuselage structure have been incorporated in the design. A conservative approach has been used with regard to structural details such as skin frame and stringer frame attachments and other areas where sufficient design data was not available.

Medical Physics Panel Discussion

NASA Astrophysics Data System (ADS)

Guèye, Paul; Avery, Steven; Baird, Richard; Soares, Christopher; Amols, Howard; Tripuraneni, Prabhakar; Majewski, Stan; Weisenberger, Drew

2006-03-01

The panel discussion will explore opportunities and vistas in medical physics research and practice, medical imaging, teaching medical physics to undergraduates, and medical physics curricula as a recruiting tool for physics departments. Panel members consist of representatives from NSBP (Paul Guèye and Steven Avery), NIH/NIBIB (Richard Baird), NIST (Christopher Soares), AAPM (Howard Amols), ASTRO (Prabhakar Tripuraneni), and Jefferson Lab (Stan Majewski and Drew Weisenberger). Medical Physicists are part of Departments of Radiation Oncology at hospitals and medical centers. The field of medical physics includes radiation therapy physics, medical diagnostic and imaging physics, nuclear medicine physics, and medical radiation safety. It also ranges from basic researcher (at college institutions, industries, and laboratories) to applications in clinical environments.

Potential candidate genomic biomarkers of drug induced vascular injury in the rat

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dalmas, Deidre A., E-mail: Deidre.A.Dalmas@gsk.com; Scicchitano, Marshall S., E-mail: Marshall.S.Scicchitano@gsk.com; Mullins, David, E-mail: David.R.Mullins@gsk.com

2011-12-15

Drug-induced vascular injury is frequently observed in rats but the relevance and translation to humans present a hurdle for drug development. Numerous structurally diverse pharmacologic agents have been shown to induce mesenteric arterial medial necrosis in rats, but no consistent biomarkers have been identified. To address this need, a novel strategy was developed in rats to identify genes associated with the development of drug-induced mesenteric arterial medial necrosis. Separate groups (n = 6/group) of male rats were given 28 different toxicants (30 different treatments) for 1 or 4 days with each toxicant given at 3 different doses (low, mid andmore » high) plus corresponding vehicle (912 total rats). Mesentery was collected, frozen and endothelial and vascular smooth muscle cells were microdissected from each artery. RNA was isolated, amplified and Affymetrix GeneChip Registered-Sign analysis was performed on selectively enriched samples and a novel panel of genes representing those which showed a dose responsive pattern for all treatments in which mesenteric arterial medial necrosis was histologically observed, was developed and verified in individual endothelial cell- and vascular smooth muscle cell-enriched samples. Data were confirmed in samples containing mesentery using quantitative real-time RT-PCR (TaqMan Trade-Mark-Sign ) gene expression profiling. In addition, the performance of the panel was also confirmed using similarly collected samples obtained from a timecourse study in rats given a well established vascular toxicant (Fenoldopam). Although further validation is still required, a novel gene panel has been developed that represents a strategic opportunity that can potentially be used to help predict the occurrence of drug-induced mesenteric arterial medial necrosis in rats at an early stage in drug development. -- Highlights: Black-Right-Pointing-Pointer A gene panel was developed to help predict rat drug-induced mesenteric MAN. Black-Right-Pointing-Pointer A gene panel was identified following treatment of rats with 28 different toxicants. Black-Right-Pointing-Pointer There was a strong correlation of genes and histologic evidence of mesenteric MAN. Black-Right-Pointing-Pointer Many genes were also regulated prior to histologic evidence of arterial effects.« less

Increased genomic prediction accuracy in wheat breeding using a large Australian panel.

PubMed

Norman, Adam; Taylor, Julian; Tanaka, Emi; Telfer, Paul; Edwards, James; Martinant, Jean-Pierre; Kuchel, Haydn

2017-12-01

Genomic prediction accuracy within a large panel was found to be substantially higher than that previously observed in smaller populations, and also higher than QTL-based prediction. In recent years, genomic selection for wheat breeding has been widely studied, but this has typically been restricted to population sizes under 1000 individuals. To assess its efficacy in germplasm representative of commercial breeding programmes, we used a panel of 10,375 Australian wheat breeding lines to investigate the accuracy of genomic prediction for grain yield, physical grain quality and other physiological traits. To achieve this, the complete panel was phenotyped in a dedicated field trial and genotyped using a custom Axiom TM Affymetrix SNP array. A high-quality consensus map was also constructed, allowing the linkage disequilibrium present in the germplasm to be investigated. Using the complete SNP array, genomic prediction accuracies were found to be substantially higher than those previously observed in smaller populations and also more accurate compared to prediction approaches using a finite number of selected quantitative trait loci. Multi-trait genetic correlations were also assessed at an additive and residual genetic level, identifying a negative genetic correlation between grain yield and protein as well as a positive genetic correlation between grain size and test weight.

Global outlook for wood and forests with the bioenergy demand implied by scenarios of the intergovernmental panel on climate change

Treesearch

Ronald Raunikar; Joseph Buongiorno; James A. Turner; Shushuai Zhu

2010-01-01

The Global Forest Products Model (GFPM) was modified to link the forest sector to two scenarios of the Intergovernmental Panel on Climate Change (IPCC), and to represent the utilization of fuelwood and industrial roundwood to produce biofuels. The scenarios examined were a subset of the “story lines” prepared by the IPCC. Each scenario has projections of population and...

Textile Fingerprinting for Dismount Analysis in the Visible, Near, and Shortwave Infrared Domain

DTIC Science & Technology

2014-03-01

Laboratory setup of reflectance data collection. The green, 100% cotton shirt sample, contact probe, and black calibration panel used are labeled...32 3.2 100 Instances of Cotton Reflectance from ASD FieldSpec ® 3 Hi-Res Spectroradiometer using a contact probe, with a black reflectance panel as...eight a-class colors. The solid vertical black line represents the wavelength selected as a feature (430nm, 481nm, 530nm, 588nm

U.S. Space Program Benefits to Education. Hearing before the Subcommittee on Space of the Committee on Science, Space, and Technology. U.S. House of Representatives, One Hundred Second Congress, Second Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science, Space and Technology.

This hearing was held to review the educational benefits of the U.S. Space Program. Testimony was given by three panels of experts related to this topic. The three panels consisted of: (1) Daniel S. Goldin, Administrator, National Aeronautics and Space Administration (NASA); Dan Brandenstein, Captain, U.S. Navy, NASA Astronaut; and Damon Butler,…

Two new templates for epidemiology applications: linked micromap plots and conditioned choropleth maps.

PubMed

Carr, D B; Wallin, J F; Carr, D A

This paper describes two interactive templates for representing spatially indexed estimates. Both templates use a matrix layout of small panels. The first template, called linked micromap plots, can represent multivariate estimates associated with each spatially indexed study unit. The second template, called conditioned choropleth maps, shows the connection between a dependent variable, as represented in a classed choropleth map, and two explanatory variables. The paper describes the cognitive considerations that motivate the layouts and representation details. The discussion also addresses topics of data quality and access, hypothesis generation, and interactive features such as pan and zoom and dynamic conditioning via sliders. The examples show epidemiological (mortality rates) and environmental (toxic concentrations) applications. Copyright 2000 John Wiley & Sons, Ltd.

Pulsed thermography detection of water and hydraulic oil intrusion in the honeycomb sandwich structure composite

NASA Astrophysics Data System (ADS)

Zhao, Shi-bin; Zhang, Cun-lin; Wu, Nai-ming

2011-08-01

Water and hydraulic oil intrusion inside honeycomb sandwich Structure Composite during service has been linked to in-flight failure in some aircraft. There is an ongoing effort to develop nondestructive testing methods to detect the presence of water and hydraulic oil within the sandwich panels. Pulsed thermography(PT) represents an attractive approach in that it is sensitive to the change of thermal properties. Using a flash lamp PT, testing can be applied directly to the surface of the panel. The viability of PT is demonstrated through laboratory imaging of both water and hydraulic oil within sandwich panels. The detection of water and hydraulic oil intrusion using a one-sided flash lamp PT is presented. It is shown that simple detection, as well as spatial localization of water and hydraulic oil within sandwich panels, and assign the quantity of water and hydraulic oil is possible.

Static and fatigue testing of full-scale fuselage panels fabricated using a Therm-X(R) process

NASA Technical Reports Server (NTRS)

Dinicola, Albert J.; Kassapoglou, Christos; Chou, Jack C.

1992-01-01

Large, curved, integrally stiffened composite panels representative of an aircraft fuselage structure were fabricated using a Therm-X process, an alternative concept to conventional two-sided hard tooling and contour vacuum bagging. Panels subsequently were tested under pure shear loading in both static and fatigue regimes to assess the adequacy of the manufacturing process, the effectiveness of damage tolerant design features co-cured with the structure, and the accuracy of finite element and closed-form predictions of postbuckling capability and failure load. Test results indicated the process yielded panels of high quality and increased damage tolerance through suppression of common failure modes such as skin-stiffener separation and frame-stiffener corner failure. Finite element analyses generally produced good predictions of postbuckled shape, and a global-local modelling technique yielded failure load predictions that were within 7% of the experimental mean.

Flight service evaluation of composite helicopter components

NASA Technical Reports Server (NTRS)

Mardoian, G. H.; Ezzo, M. B.

1986-01-01

This report presents an assessment of composite helicopter tail rotor spars and horizontal stabilizers, exposed to the effects of the environment, after up to five and a half years of commercial service. This evaluation is supported by test results of helicopter components and panels which have been exposed to outdoor environmental effects since September 1979. Full scale static and fatigue tests have been conducted on graphite/epoxy and Kevlar/epoxy composite components obtained from Sikorsky Model S-76 helicopters in commercial operations in the Gulf Coast region of Louisiana. Small scale static and fatigue tests are being conducted on coupons obtained from panels under exposure to outdoor conditions in Stratford, Connecticut and West Palm, Florida. The panel layups are representative of the S-76 components. Additionally, this report discusses the results of moisture absorption evaluations and strength tests on the S-76 components and composite panels with up to five years of outdoor exposure.

A new discrete-element approach for the assessment of the seismic resistance of composite reinforced concrete-masonry buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Calio, I.; Cannizzaro, F.; Marletta, M.

2008-07-08

In the present study a new discrete-element approach for the evaluation of the seismic resistance of composite reinforced concrete-masonry structures is presented. In the proposed model, unreinforced masonry panels are modelled by means of two-dimensional discrete-elements, conceived by the authors for modelling masonry structures, whereas the reinforced concrete elements are modelled by lumped plasticity elements interacting with the masonry panels through nonlinear interface elements. The proposed procedure was adopted for the assessment of the seismic response of a case study confined-masonry building which was conceived to be a typical representative of a wide class of residential buildings designed to themore » requirements of the 1909 issue of the Italian seismic code and widely adopted in the aftermath of the 1908 earthquake for the reconstruction of the cities of Messina and Reggio Calabria.« less

A new discrete-element approach for the assessment of the seismic resistance of composite reinforced concrete-masonry buildings

NASA Astrophysics Data System (ADS)

Caliò, I.; Cannizzaro, F.; D'Amore, E.; Marletta, M.; Pantò, B.

2008-07-01

In the present study a new discrete-element approach for the evaluation of the seismic resistance of composite reinforced concrete-masonry structures is presented. In the proposed model, unreinforced masonry panels are modelled by means of two-dimensional discrete-elements, conceived by the authors for modelling masonry structures, whereas the reinforced concrete elements are modelled by lumped plasticity elements interacting with the masonry panels through nonlinear interface elements. The proposed procedure was adopted for the assessment of the seismic response of a case study confined-masonry building which was conceived to be a typical representative of a wide class of residential buildings designed to the requirements of the 1909 issue of the Italian seismic code and widely adopted in the aftermath of the 1908 earthquake for the reconstruction of the cities of Messina and Reggio Calabria.

A Receptor-Based Explanation for Tsetse Fly Catch Distribution between Coloured Cloth Panels and Flanking Nets

PubMed Central

Santer, Roger D.

2015-01-01

Tsetse flies transmit trypanosomes that cause nagana in cattle, and sleeping sickness in humans. Therefore, optimising visual baits to control tsetse is an important priority. Tsetse are intercepted at visual baits due to their initial attraction to the bait, and their subsequent contact with it due to landing or accidental collision. Attraction is proposed to be driven in part by a chromatic mechanism to which a UV-blue photoreceptor contributes positively, and a UV and a green photoreceptor contribute negatively. Landing responses are elicited by stimuli with low luminance, but many studies also find apparently strong landing responses when stimuli have high UV reflectivity, which would imply that UV wavelengths contribute negatively to attraction at a distance, but positively to landing responses at close range. The strength of landing responses is often judged using the number of tsetse sampled at a cloth panel expressed as a proportion of the combined catch of the cloth panel and a flanking net that samples circling flies. I modelled these data from two previously published field studies, using calculated fly photoreceptor excitations as predictors. I found that the proportion of tsetse caught on the cloth panel increased with an index representing the chromatic mechanism driving attraction, as would be expected if the same mechanism underlay both long- and close-range attraction. However, the proportion of tsetse caught on the cloth panel also increased with excitation of the UV-sensitive R7p photoreceptor, in an apparently separate but interacting behavioural mechanism. This R7p-driven effect resembles the fly open-space response which is believed to underlie their dispersal towards areas of open sky. As such, the proportion of tsetse that contact a cloth panel likely reflects a combination of deliberate landings by potentially host-seeking tsetse, and accidental collisions by those seeking to disperse, with a separate visual mechanism underlying each behaviour. PMID:26474406

JOCG Aircraft/Stores Compatibility Symposium Proceedings (8th) Held in Fort Walton Beach, Florida on 23-25 October 1990

DTIC Science & Technology

1990-10-25

Compatibility Sub- Group Steering Committee Sub- Group Chairman Wiley I. Robinson Air Force Systems Command Study Group Chairmen Electrical Interface Joe...on the surface of the body organized into groups defining the corners of a series of four -sided surface panel elements which represent a faceted...Structures Technology. In the Aeroanalysis Group , Dr. Cunningham has conducted many studies leading to devel- opments in the area of analytically

Dose-Response Relation Between Work Hours and Cardiovascular Disease Risk: Findings From the Panel Study of Income Dynamics.

PubMed

Conway, Sadie H; Pompeii, Lisa A; Roberts, Robert E; Follis, Jack L; Gimeno, David

2016-03-01

The aim of this study was to examine the presence of a dose-response relationship between work hours and incident cardiovascular disease (CVD) in a representative sample of U.S. workers. A retrospective cohort study of 1926 individuals from the Panel Study of Income Dynamics (1986 to 2011) employed for at least 10 years. Restricted cubic spline regression was used to estimate the dose-response relationship of work hours with CVD. A dose-response relationship was observed in which an average workweek of 46 hours or more for at least 10 years was associated with an increased risk of CVD. Compared with working 45 hours per week, working an additional 10 hours per week or more for at least 10 years increased CVD risk by at least 16%. Working more than 45 work hours per week for at least 10 years may be an independent risk factor for CVD.

Ultra-low-density genotype panels for breed assignment of Angus and Hereford cattle.

PubMed

Judge, M M; Kelleher, M M; Kearney, J F; Sleator, R D; Berry, D P

2017-06-01

Angus and Hereford beef is marketed internationally for apparent superior meat quality attributes; DNA-based breed authenticity could be a useful instrument to ensure consumer confidence on premium meat products. The objective of this study was to develop an ultra-low-density genotype panel to accurately quantify the Angus and Hereford breed proportion in biological samples. Medium-density genotypes (13 306 single nucleotide polymorphisms (SNPs)) were available on 54 703 commercial and 4042 purebred animals. The breed proportion of the commercial animals was generated from the medium-density genotypes and this estimate was regarded as the gold-standard breed composition. Ten genotype panels (100 to 1000 SNPs) were developed from the medium-density genotypes; five methods were used to identify the most informative SNPs and these included the Delta statistic, the fixation (F st) statistic and an index of both. Breed assignment analyses were undertaken for each breed, panel density and SNP selection method separately with a programme to infer population structure using the entire 13 306 SNP panel (representing the gold-standard measure). Breed assignment was undertaken for all commercial animals (n=54 703), animals deemed to contain some proportion of Angus based on pedigree (n=5740) and animals deemed to contain some proportion of Hereford based on pedigree (n=5187). The predicted breed proportion of all animals from the lower density panels was then compared with the gold-standard breed prediction. Panel density, SNP selection method and breed all had a significant effect on the correlation of predicted and actual breed proportion. Regardless of breed, the Index method of SNP selection numerically (but not significantly) outperformed all other selection methods in accuracy (i.e. correlation and root mean square of prediction) when panel density was ⩾300 SNPs. The correlation between actual and predicted breed proportion increased as panel density increased. Using 300 SNPs (selected using the global index method), the correlation between predicted and actual breed proportion was 0.993 and 0.995 in the Angus and Hereford validation populations, respectively. When SNP panels optimised for breed prediction in one population were used to predict the breed proportion of a separate population, the correlation between predicted and actual breed proportion was 0.034 and 0.044 weaker in the Hereford and Angus populations, respectively (using the 300 SNP panel). It is necessary to include at least 300 to 400 SNPs (per breed) on genotype panels to accurately predict breed proportion from biological samples.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, the media record workers on the job preparing the orbiter Atlantis for Return to Flight. Both local and national reporters representing print and TV networks were invited to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.

NASA Image and Video Library

2003-09-26

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, the media record workers on the job preparing the orbiter Atlantis for Return to Flight. Both local and national reporters representing print and TV networks were invited to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.

Computing induced velocity perturbations due to a helicopter fuselage in a free stream

NASA Technical Reports Server (NTRS)

Berry, John D.; Althoff, Susan L.

1989-01-01

The velocity field of a representative helicopter fuselage in a free stream is computed. Perturbation velocities due to the fuselage are computed in a plan above the location of the helicopter rotor (rotor removed). The velocity perturbations computed by a source-panel model of the fuselage are compared with experimental measurements taken with a laser velocimeter. Three paneled fuselage models are studied: fuselage shape, fuselage shape with hub shape, and a body of revolution. The velocity perturbations computed for both fuselage shape models agree well with the measured velocity field except in the close vicinity of the rotor hub. In the hub region, without knowing the extent of separation, modeling of the effective source shape is difficult. The effects of the fuselage perturbations are not well-predicted with a simplified ellipsoid fuselage. The velocity perturbations due to the fuselage at the plane of the measurements have magnitudes of less than 8 percent of free-stream velocity. The velocity perturbations computed by the panel method are tabulated for the same locations at which previously reported rotor-inflow velocity measurements were made.

Barriers to Self-Sufficiency for Single Female Heads of Families. Hearings before a Subcommitee of the Committee on Government Operations, House of Representatives, Ninety-Ninth Congress, First Session (July 9-10, 1985).

ERIC Educational Resources Information Center

Congress of the U. S., Washington, DC. House Committee on Government Operations.

The proceedings of a House of Representatives hearing on opportunities for self-sufficiency for single women in poverty are presented in this document. Included are statements presented by three panels consisting of experts in the field of welfare and employment policy, the General Accounting Office, and representatives of the National Association…

78 FR 52525 - Dichloromethane and N-Methylpyrrolidone TSCA Chemical Risk Assessment; Notice of Public Meetings...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-23

... Dichloromethane and N-Methylpyrrolidone.'' Dichloromethane and N-Methylpyrrolidone (DCM and NMP) (CASRN 75-09-2... represent and should not be construed to represent any Agency determination or policy. The draft DCM and NMP..., to assemble a panel of experts to evaluate the draft DCM and NMP TSCA risk assessment report for...

A Study of Coronal-Interplanetary Coupling Mechanisms

DTIC Science & Technology

1991-04-30

Magnetic Feild in Astrophys. J., Vol. 344, 478-493, 1989. 111.3. Reflection and Trapping of Transient Alfven Waves Propagating in an Isothermal...1990. VI.4. A Comparison Between Progressive Extension Method (PEM) and Iterative Method (IM) for Magnetic Feild Extrapolations in the Solar...Flight Center. Representative results are shown in the upper left panel of Figure 1 in which (a) shows the observed vector magnetic field at photospheric

A survey of new technology for cockpit application to 1990's transport aircraft simulators

NASA Technical Reports Server (NTRS)

Holt, A. P., Jr.; Noneaker, D. O.; Walthour, L.

1980-01-01

Two problems were investigated: inter-equipment data transfer, both on board the aircraft and between air and ground; and crew equipment communication via the cockpit displays and controls. Inter-equipment data transfer is discussed in terms of data bus and data link requirements. Crew equipment communication is discussed regarding the availability of CRT display systems for use in research simulators to represent flat panel displays of the future, and of software controllable touch panels.

Fire containment tests of aircraft interior panels

NASA Technical Reports Server (NTRS)

Kourtides, D. A.; Parker, J. A.; Leon, H. A.; Williamson, R. B.; Hasegawa, H.; Fisher, F.; Draemel, R.; Marcussen, W. H.; Hilado, C. J.

1976-01-01

The paper describes an experimental program carried out to evaluate a possible method for testing the fire-containment qualities of aircraft interior panels. The experimental apparatus consisted of a burner that simulates various fire loads under different ventilation conditions in an enclosure of approximately the same size as an aircraft lavatory module. Two fire-containment tests are discussed in which two adjoining walls of the enclosure were made from state-of-the-art composite panels; rats were exposed to the combustion products in order to evaluate the toxic threat posed by those products. The results show that the burner can be employed to represent various fire-load conditions and that the methodology developed for fire containment can be useful in evaluating the fire resistance of composite panels before conducting large-scale tests. It is concluded that elements of the fire-containment criteria include the temperature rise on the backface of the panels as a function of time, the flame burn-through by either decomposition or severe distortion of the material, and the toxicity of the combustion gases evolved.

Defining the physician's duty to warn: consensus statement of Ontario's Medical Expert Panel on Duty to Inform

PubMed Central

Ferris, L E; Barkun, H; Carlisle, J; Hoffman, B; Katz, C; Silverman, M

1998-01-01

Ontario's Medical Expert Panel on Duty to Inform was formed to consider the duty of Ontario physicians in circumstances where a patient threatens to kill or cause serious bodily harm to a third party. The panel was concerned about the implications of any duty to inform on the integrity of the physician-patient relationship, particularly with respect to confidentiality. The panel agreed that regulations safeguarding the confidentiality of patient information ought to be changed only if there is a critical reason for doing so, but, after deliberation, the panel members concluded that the need to protect the public from serious risk of harm is a paramount concern that should supersede the duty of confidentiality. The recommendations reported here were endorsed in principle by the panelists and the groups they represented (the Royal College of Physicians and Surgeons of Canada, the Canadian Medical Protective Association, the College of Physicians and Surgeons of Ontario, the Ontario College of Family Physicians and the Ontario Medical Association) and are being implemented by the College of Physicians and Surgeons of Ontario. PMID:9629112

Design and analysis of a stiffened composite fuselage panel

NASA Technical Reports Server (NTRS)

Dickson, J. N.; Biggers, S. B.

1980-01-01

The design and analysis of stiffened composite panel that is representative of the fuselage structure of existing wide bodied aircraft is discussed. The panel is a minimum weight design, based on the current level of technology and realistic loads and criteria. Several different stiffener configurations were investigated in the optimization process. The final configuration is an all graphite/epoxy J-stiffened design in which the skin between adjacent stiffeners is permitted to buckle under design loads. Fail safe concepts typically employed in metallic fuselage structure have been incorporated in the design. A conservative approach has been used with regard to structural details such as skin/frame and stringer/frame attachments and other areas where sufficient design data was not available.

Next-generation sequencing improves treatment efficacy and reduces hospitalization in children with drug-resistant epilepsy.

PubMed

Peng, Jing; Pang, Nan; Wang, Ying; Wang, Xiao-Le; Chen, Jian; Xiong, Juan; Peng, Pan; Zhu, Can-Hui; Kessi, Miriam Barakael; He, Fang; Yin, Fei

2018-06-22

The purposes of this study were three-fold: (i) to determine the contribution of known genes to the causation of a broad-spectrum of pediatric drug-resistant epilepsy (DRE), (ii) to compare the diagnostic yield and cost among different next-generation sequencing (NGS) approaches, and especially (iii) to assess how NGS approaches can benefit patients by improving diagnosis and treatment efficiency. This study enrolled 273 pediatric DRE patients with no obvious acquired etiology. Seventy-four patients underwent whole-exome sequencing (WES), 141 patients had epilepsy-related gene panel testing, and another 58 patients had clinical WES gene panel testing. We obtained these patients' seizure and hospitalization frequency by periodic follow-up phone calls and outpatient visits. Genetic diagnosis was achieved in 86 patients (31.5%) and involved 93 likely disease-causing mutations in 33 genes. In this study, the detection rates of the epilepsy-related gene panel, the clinical WES gene panel, and WES were 32.6% (46/141), 44.8% (26/58), and 17.3% (13/74), respectively. Moreover, 34 patients accepted corrective therapy according to their mutant genes, after which 52.9% (18/34) became seizure-free and 38.2% (13/34) achieved seizure reduction. In the end, patients with either positive or negative genetic results had significantly fewer hospitalization incidents (times/half year) than before (positive genetic results group 0.58 ± 1.14 vs 0.10 ± 0.26; negative genetic results group 0.72 ± 1.65 vs 0.12 ± 0.33). These results offer further proof that NGS approaches represent powerful tools for establishing a definitive diagnosis. Moreover, this study indicated how NGS can improve treatment efficacy and reduce hospitalization in children with DRE. © 2018 John Wiley & Sons Ltd.

PLCO Ovarian Phase III Validation Study — EDRN Public Portal

Cancer.gov

Our preliminary data indicate that the performance of CA 125 as a screening test for ovarian cancer can be improved upon by additional biomarkers. With completion of one additional validation step, we will be ready to test the performance of a consensus marker panel in a phase III validation study. Given the original aims of the PLCO trial, we believe that the PLCO represents an ideal longitudinal cohort offering specimens for phase III validation of ovarian cancer biomarkers.

Development and Design Application of Rigidized Surface Insulation Thermal Protection Systems, Volume 1. [for the space shuttle

NASA Technical Reports Server (NTRS)

1972-01-01

Materials and design technology of the all-silica LI-900 rigid surface insulation (RSI) thermal protection system (TPS) concept for the shuttle spacecraft is presented. All results of contract development efforts are documented. Engineering design and analysis of RSI strain arrestor plate material selections, sizing, and weight studies are reported. A shuttle prototype test panel was designed, analyzed, fabricated, and delivered. Thermophysical and mechanical properties of LI-900 were experimentally established and reported. Environmental tests, including simulations of shuttle loads represented by thermal response, turbulent duct, convective cycling, and chemical tolerance tests are described and results reported. Descriptions of material test samples and panels fabricated for testing are included. Descriptions of analytical sizing and design procedures are presented in a manner formulated to allow competent engineering organizations to perform rational design studies. Results of parametric studies involving material and system variables are reported. Material performance and design data are also delineated.

Phase 2 of CATALISE: a multinational and multidisciplinary Delphi consensus study of problems with language development: Terminology.

PubMed

Bishop, Dorothy V M; Snowling, Margaret J; Thompson, Paul A; Greenhalgh, Trisha

2017-10-01

Lack of agreement about criteria and terminology for children's language problems affects access to services as well as hindering research and practice. We report the second phase of a study using an online Delphi method to address these issues. In the first phase, we focused on criteria for language disorder. Here we consider terminology. The Delphi method is an iterative process in which an initial set of statements is rated by a panel of experts, who then have the opportunity to view anonymised ratings from other panel members. On this basis they can either revise their views or make a case for their position. The statements are then revised based on panel feedback, and again rated by and commented on by the panel. In this study, feedback from a second round was used to prepare a final set of statements in narrative form. The panel included 57 individuals representing a range of professions and nationalities. We achieved at least 78% agreement for 19 of 21 statements within two rounds of ratings. These were collapsed into 12 statements for the final consensus reported here. The term 'Language Disorder' is recommended to refer to a profile of difficulties that causes functional impairment in everyday life and is associated with poor prognosis. The term, 'Developmental Language Disorder' (DLD) was endorsed for use when the language disorder was not associated with a known biomedical aetiology. It was also agreed that (a) presence of risk factors (neurobiological or environmental) does not preclude a diagnosis of DLD, (b) DLD can co-occur with other neurodevelopmental disorders (e.g. ADHD) and (c) DLD does not require a mismatch between verbal and nonverbal ability. This Delphi exercise highlights reasons for disagreements about terminology for language disorders and proposes standard definitions and nomenclature. © 2017 The Authors. Journal of Child Psychology and Psychiatry published by John Wiley & Sons Ltd on behalf of Association for Child and Adolescent Mental Health.

Rapid and Accurate Behavioral Health Diagnostic Screening: Initial Validation Study of a Web-Based, Self-Report Tool (the SAGE-SR)

PubMed Central

Purcell, Susan E; Rhea, Karen; Maier, Philip; First, Michael; Zweede, Lisa; Sinisterra, Manuela; Nunn, M Brad; Austin, Marie-Paule; Brodey, Inger S

2018-01-01

Background The Structured Clinical Interview for DSM (SCID) is considered the gold standard assessment for accurate, reliable psychiatric diagnoses; however, because of its length, complexity, and training required, the SCID is rarely used outside of research. Objective This paper aims to describe the development and initial validation of a Web-based, self-report screening instrument (the Screening Assessment for Guiding Evaluation-Self-Report, SAGE-SR) based on the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) and the SCID-5-Clinician Version (CV) intended to make accurate, broad-based behavioral health diagnostic screening more accessible within clinical care. Methods First, study staff drafted approximately 1200 self-report items representing individual granular symptoms in the diagnostic criteria for the 8 primary SCID-CV modules. An expert panel iteratively reviewed, critiqued, and revised items. The resulting items were iteratively administered and revised through 3 rounds of cognitive interviewing with community mental health center participants. In the first 2 rounds, the SCID was also administered to participants to directly compare their Likert self-report and SCID responses. A second expert panel evaluated the final pool of items from cognitive interviewing and criteria in the DSM-5 to construct the SAGE-SR, a computerized adaptive instrument that uses branching logic from a screener section to administer appropriate follow-up questions to refine the differential diagnoses. The SAGE-SR was administered to healthy controls and outpatient mental health clinic clients to assess test duration and test-retest reliability. Cutoff scores for screening into follow-up diagnostic sections and criteria for inclusion of diagnoses in the differential diagnosis were evaluated. Results The expert panel reduced the initial 1200 test items to 664 items that panel members agreed collectively represented the SCID items from the 8 targeted modules and DSM criteria for the covered diagnoses. These 664 items were iteratively submitted to 3 rounds of cognitive interviewing with 50 community mental health center participants; the expert panel reviewed session summaries and agreed on a final set of 661 clear and concise self-report items representing the desired criteria in the DSM-5. The SAGE-SR constructed from this item pool took an average of 14 min to complete in a nonclinical sample versus 24 min in a clinical sample. Responses to individual items can be combined to generate DSM criteria endorsements and differential diagnoses, as well as provide indices of individual symptom severity. Preliminary measures of test-retest reliability in a small, nonclinical sample were promising, with good to excellent reliability for screener items in 11 of 13 diagnostic screening modules (intraclass correlation coefficient [ICC] or kappa coefficients ranging from .60 to .90), with mania achieving fair test-retest reliability (ICC=.50) and other substance use endorsed too infrequently for analysis. Conclusions The SAGE-SR is a computerized adaptive self-report instrument designed to provide rigorous differential diagnostic information to clinicians. PMID:29572204

76 FR 20324 - Availability of Seats for the Monterey Bay National Marine Sanctuary Advisory Council

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-12

...: Diving, Education (alternate), Research (alternate), Tourism (alternate) and Agriculture (alternate...'') chaired by the Conservation Representative, and the Business and Tourism Activity Panel (``BTAP'') chaired...

76 FR 79751 - Industry Advisory Panel: Notice of Charter Renewal

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-22

... meeting announcement, no later than fifteen business days before each meeting. OBO's mission is to provide.... interests worldwide. These facilities represent American values and the best in American architecture...

Panel discussion review: session 1--exposure assessment and related errors in air pollution epidemiologic studies.

PubMed

Sarnat, Jeremy A; Wilson, William E; Strand, Matthew; Brook, Jeff; Wyzga, Ron; Lumley, Thomas

2007-12-01

Examining the validity of exposure metrics used in air pollution epidemiologic models has been a key focus of recent exposure assessment studies. The objective of this work has been, largely, to determine what a given exposure metric represents and to quantify and reduce any potential errors resulting from using these metrics in lieu of true exposure measurements. The current manuscript summarizes the presentations of the co-authors from a recent EPA workshop, held in December 2006, dealing with the role and contributions of exposure assessment in addressing these issues. Results are presented from US and Canadian exposure and pollutant measurement studies as well as theoretical simulations to investigate what both particulate and gaseous pollutant concentrations represent and the potential errors resulting from their use in air pollution epidemiologic studies. Quantifying the association between ambient pollutant concentrations and corresponding personal exposures has led to the concept of defining attenuation factors, or alpha. Specifically, characterizing pollutant-specific estimates for alpha was shown to be useful in developing regression calibration methods involving PM epidemiologic risk estimates. For some gaseous pollutants such as NO2 and SO2, the associations between ambient concentrations and personal exposures were shown to be complex and still poorly understood. Results from recent panel studies suggest that ambient NO2 measurements may, in some locations, be serving as surrogates to traffic pollutants, including traffic-related PM2.5, hopanes, steranes, and oxidized nitrogen compounds (rather than NO2).

Acupuncture.

PubMed

The objective of this NIH Consensus Statement is to inform the biomedical research and clinical practice communities of the results of the NIH Consensus Development Conference on Acupuncture. The statement provides state-of-the-art information regarding the appropriate use of acupuncture, and presents the conclusions and recommendations of the consensus panel regarding these issues. In addition, the statement identifies those areas of study that deserve further investigation. Upon completion, the reader should possess a clear working clinical knowledge of the state-of-the-art regarding this topic. The target audience of physicians for this statement includes, but is not limited to, family practitioners, medical acupuncturists, psychiatrists, and specialists in pain medicine. A non-Federal, nonadvocate, 12-member panel representing the fields of acupuncture, pain, psychology, psychiatry, physical medicine and rehabilitation, drug abuse, family practice, internal medicine, health policy, epidemiology, statistics, physiology, biophysics, and the public. In addition, 25 experts from these same fields presented data to the panel and a conference audience of 1,200. The literature was searched through Medline, and an extensive bibliography of references was provided to the panel and the conference audience. Experts prepared abstracts with relevant citations from the literature. Scientific evidence was given precedence over clinical anecdotal experience. The panel, answering predefined questions, developed their conclusions based on the scientific evidence presented in open forum and the scientific literature. The panel composed a draft statement, which was read in its entirety and circulated to the experts and the audience for comment. Thereafter, the panel resolved conflicting recommendations and released a revised statement at the end of the conference. The panel finalized the revisions within a few weeks after the conference. The draft statement was made available on the World Wide Web immediately following its release at the conference and was updated with the panel's final revisions. Acupuncture as a therapeutic intervention is widely practiced in the United States. While there have been many studies of its potential usefulness, many of these studies provide equivocal results because of design, sample size, and other factors. The issue is further complicated by inherent difficulties in the use of appropriate controls, such as placebos and sham acupuncture groups. However, promising results have emerged, for example, showing efficacy of acupuncture in adult postoperative and chemotherapy nausea and vomiting and in postoperative dental pain. There are other situations such as addiction, stroke rehabilitation, headache, menstrual cramps, tennis elbow, fibromyalgia, myofascial pain, osteoarthritis, low back pain, carpal tunnel syndrome, and asthma, in which acupuncture may be useful as an adjunct treatment or an acceptable alternative or be included in a comprehensive management program. Further research is likely to uncover additional areas where acupuncture interventions will be useful.

Improvements to a method for the geometrically nonlinear analysis of compressively loaded stiffened composite panels

NASA Technical Reports Server (NTRS)

Stoll, Frederick

1993-01-01

The NLPAN computer code uses a finite-strip approach to the analysis of thin-walled prismatic composite structures such as stiffened panels. The code can model in-plane axial loading, transverse pressure loading, and constant through-the-thickness thermal loading, and can account for shape imperfections. The NLPAN code represents an attempt to extend the buckling analysis of the VIPASA computer code into the geometrically nonlinear regime. Buckling mode shapes generated using VIPASA are used in NLPAN as global functions for representing displacements in the nonlinear regime. While the NLPAN analysis is approximate in nature, it is computationally economical in comparison with finite-element analysis, and is thus suitable for use in preliminary design and design optimization. A comprehensive description of the theoretical approach of NLPAN is provided. A discussion of some operational considerations for the NLPAN code is included. NLPAN is applied to several test problems in order to demonstrate new program capabilities, and to assess the accuracy of the code in modeling various types of loading and response. User instructions for the NLPAN computer program are provided, including a detailed description of the input requirements and example input files for two stiffened-panel configurations.

Kepler's Supernova Remnant: A View from Chandra X-Ray Observatory

NASA Technical Reports Server (NTRS)

2004-01-01

[figure removed for brevity, see original site]

[figure removed for brevity, see original site] Figure 1

Each top panel in the composite above shows the entire remnant. Each color in the composite represents a different region of the electromagnetic spectrum, from X-rays to infrared light. The X-ray and infrared data cannot be seen with the human eye. Astronomers have color-coded those data so they can be seen in these images.

The bottom panels are close-up views of the remnant. In the bottom, center image, Hubble sees fine details in the brightest, densest areas of gas. The region seen in these images is outlined in the top, center panel.

The images indicate that the bubble of gas that makes up the supernova remnant appears different in various types of light. Chandra reveals the hottest gas [colored blue and colored green], which radiates in X-rays. The blue color represents the higher-energy gas; the green, the lower-energy gas. Hubble shows the brightest, densest gas [colored yellow], which appears in visible light. Spitzer unveils heated dust [colored red], which radiates in infrared light.

Effects of personal experiences on the interpretation of the meaning of colours used in the displays and controls in electric control panels.

PubMed

Lee, Inseok; Hwang, Won-Gue

2015-01-01

A survey was conducted to examine how personal experiences affect the interpretation of the meaning of display and control colours on electric control panels (ECPs). In Korea, the red light on ECPs represents a normal state of operation, while the green light represents a stopped state of operation; this appears to contradict the general stereotypes surrounding these colours. The survey results indicated that the participants who had experience in using ECPs interpreted the colour meaning differently from the other participant group. More than half of the experienced participants regarded the coloured displays and controls as they were designed, while most participants in the other group appeared to interpret the colours in accordance with the stereotypes. It is presumed that accidents related to human errors can occur when non-experienced people use the ECPs, which are easily accessible in many buildings. Practitioner Summary: A survey was conducted to investigate how personal experiences affect the interpretation of the function meanings of coloured lights on electrical control panels. It was found that the interpretation varies according to personal experiences, which can induce accidents related to human errors while operating electrical equipment.

Titanium honeycomb acoustic lining structural and thermal test report. [for acoustic tailpipe for JT8D engine

NASA Technical Reports Server (NTRS)

Joynes, D.; Balut, J. P.

1974-01-01

The results are presented of static, fatigue and thermal testing of titanium honeycomb acoustic panels representing the acoustic tailpipe for the Pratt and Whitney Aircraft JT8D Refan engine which is being studied for use on the Boeing 727-200 airplane. Test specimens represented the engine and tailpipe flange joints, the rail to which the thrust reverser is attached and shear specimens of the tailpipe honeycomb. Specimens were made in four different batches with variations in configuration, materials and processes in each. Static strength of all test specimens exceeded the design ultimate load requirements. Fatigue test results confirmed that aluminum brazed titanium, as used in the Refan tailpipe design, meets the fatigue durability objectives. Quality of welding was found to be critical to life, with substandard welding failing prematurely, whereas welding within the process specification exceeded the panel skin life. Initial fatigue testing used short grip length bolts which failed prematurely. These were replaced with longer bolts and subsequent testing demonstrated the required life. Thermal tests indicate that perforated skin acoustic honeycomb has approximately twice the heat transfer of solid skin honeycomb.

Ottawa panel evidence-based clinical practice guidelines for therapeutic exercises and manual therapy in the management of osteoarthritis.

PubMed

2005-09-01

Osteoarthritis (OA) affects a large and growing proportion of the population. The purpose of this project was to create guidelines for the use of therapeutic exercises and manual therapy in the management of adult patients (>18 years of age) with a diagnosis of OA. All stages of the disease were included in the analysis, and studies of patients who had recent surgery or other rheumatologic, musculoskeletal, or spinal problems or of subjects without known pathology or impairments were excluded. The Ottawa Methods Group used Cochrane Collaboration methods to find and synthesize evidence from comparative controlled trials and then asked stakeholder groups to nominate representatives to serve on a panel of experts. The Ottawa Panel agreed on criteria for grading the strength of the recommendations and their supporting evidence. Of the 609 potential articles on therapeutic exercises for OA that were identified, 113 were considered potentially relevant, and 26 randomized controlled trials and controlled clinical trials were ultimately used. Sixteen positive recommendations of clinical benefit were developed for therapeutic exercises, especially strengthening exercises and general physical activity, particularly for the management of pain and improvement of functional status. Manual therapy combined with exercises also is recommended in the management of patients with OA. The Ottawa Panel recommends the use of therapeutic exercises alone, or combined with manual therapy, for managing patients with OA. There were a total of 16 positive recommendations: 13 grade A and 3 grade C+. The Ottawa Panel recommends the use of therapeutic exercises because of the strong evidence (grades A, B, and C+) in the literature.

Tenth AMS Conference on Satellite Meteorology and Oceanography

NASA Technical Reports Server (NTRS)

Ferraro, R.; Colton, M.; Deblonde, G.; Jedlovec, G.; Lee, T.

2000-01-01

The American Meteorological Society held its Tenth Conference on Satellite Meteorology and Oceanography in conjunction with the 80th Annual Meeting in Long Beach, California. For the second consecutive conference, a format that consisted of primarily posters, complemented by invited theme oriented oral presentations, and panel discussions on various aspects on satellite remote sensing were utilized. Joint sessions were held with the Second Conference on Artificial Intelligence, the Eleventh Conference on Middle Atmosphere, and the Eleventh symposium on Global Change Studies. In total, there were 23 oral presentations, 170 poster presentations, and four panel discussions. Over 450 people representing a wide spectrum of the society attended one or more of the sessions in the five-day meeting. The program for the Tenth Conference on Satellite Meteorology and Oceanography can viewed in the October 1999 issue of the Bulletin.

15 CFR 2301.16 - Technical evaluation process.

Code of Federal Regulations, 2010 CFR

2010-01-01

... distance learning; and rating by a national advisory panel, composed of representatives of major national... amended by Executive Order 12416. (e) Based upon the evaluation criteria contained in § 2301.17, the PTFP...

15 CFR 2301.16 - Technical evaluation process.

Code of Federal Regulations, 2011 CFR

2011-01-01

... distance learning; and rating by a national advisory panel, composed of representatives of major national... amended by Executive Order 12416. (e) Based upon the evaluation criteria contained in § 2301.17, the PTFP...

A Finite Element Analysis for Predicting the Residual Compressive Strength of Impact-Damaged Sandwich Panels

NASA Technical Reports Server (NTRS)

Ratcliffe, James G.; Jackson, Wade C.

2008-01-01

A simple analysis method has been developed for predicting the residual compressive strength of impact-damaged sandwich panels. The method is tailored for honeycomb core-based sandwich specimens that exhibit an indentation growth failure mode under axial compressive loading, which is driven largely by the crushing behavior of the core material. The analysis method is in the form of a finite element model, where the impact-damaged facesheet is represented using shell elements and the core material is represented using spring elements, aligned in the thickness direction of the core. The nonlinear crush response of the core material used in the analysis is based on data from flatwise compression tests. A comparison with a previous analysis method and some experimental data shows good agreement with results from this new approach.

A Finite Element Analysis for Predicting the Residual Compression Strength of Impact-Damaged Sandwich Panels

NASA Technical Reports Server (NTRS)

Ratcliffe, James G.; Jackson, Wade C.

2008-01-01

A simple analysis method has been developed for predicting the residual compression strength of impact-damaged sandwich panels. The method is tailored for honeycomb core-based sandwich specimens that exhibit an indentation growth failure mode under axial compression loading, which is driven largely by the crushing behavior of the core material. The analysis method is in the form of a finite element model, where the impact-damaged facesheet is represented using shell elements and the core material is represented using spring elements, aligned in the thickness direction of the core. The nonlinear crush response of the core material used in the analysis is based on data from flatwise compression tests. A comparison with a previous analysis method and some experimental data shows good agreement with results from this new approach.

On using ethical principles of community-engaged research in translational science.

PubMed

Khodyakov, Dmitry; Mikesell, Lisa; Schraiber, Ron; Booth, Marika; Bromley, Elizabeth

2016-05-01

The transfer of new discoveries into both clinical practice and the wider community calls for reliance on interdisciplinary translational teams that include researchers with different areas of expertise, representatives of health care systems and community organizations, and patients. Engaging new stakeholders in research, however, calls for a reconsideration or expansion of the meaning of ethics in translational research. We explored expert opinion on the applicability of ethical principles commonly practiced in community-engaged research (CEnR) to translational research. To do so, we conducted 2 online, modified-Delphi panels with 63 expert stakeholders who iteratively rated and discussed 9 ethical principles commonly used in CEnR in terms of their importance and feasibility for use in translational research. The RAND/UCLA appropriateness method was used to analyze the data and determine agreement and disagreement among participating experts. Both panels agreed that ethical translational research should be "grounded in trust." Although the academic panel endorsed "culturally appropriate" and "forthcoming with community about study risks and benefits," the mixed academic-community panel endorsed "scientifically valid" and "ready to involve community in interpretation and dissemination" as important and feasible principles of ethical translational research. These findings suggest that in addition to protecting human subjects, contemporary translational science models need to account for the interests of, and owe ethical obligations to, members of the investigative team and the community at large. Copyright © 2016 Elsevier Inc. All rights reserved.

On Using Ethical Principles of Community-Engaged Research in Translational Science

PubMed Central

Mikesell, Lisa; Schraiber, Ron; Booth, Marika; Bromley, Elizabeth

2015-01-01

The transfer of new discoveries into both clinical practice and the wider community calls for reliance on interdisciplinary translational teams that include researchers with different areas of expertise, representatives of healthcare systems and community organizations, and patients. Engaging new stakeholders in research, however, calls for a re-consideration or expansion of the meaning of ethics in translational research. We explored expert opinion on the applicability of ethical principles commonly practiced in community-engaged research (CEnR) to translational research. To do so, we conducted two online, modified-Delphi panels with 63 expert stakeholders who iteratively rated and discussed nine ethical principles commonly used in CEnR in terms of their importance and feasibility for use in translational research. The RAND/UCLA Appropriateness Method was used to analyze the data and determine agreement and disagreement among participating experts. Both panels agreed that ethical translational research should be “grounded in trust.” While the academic panel endorsed “culturally appropriate” and “forthcoming with community about study risks and benefits,” the mixed academic-community panel endorsed “scientifically valid” and “ready to involve community in interpretation and dissemination” as important and feasible principles of ethical translational research. These findings suggest that in addition to protecting human subjects, contemporary translational science models need to account for the interests of, and owe ethical obligations to, members of the investigative team and the community at large. PMID:26773561

A critique of the cross-lagged panel model.

PubMed

Hamaker, Ellen L; Kuiper, Rebecca M; Grasman, Raoul P P P

2015-03-01

The cross-lagged panel model (CLPM) is believed by many to overcome the problems associated with the use of cross-lagged correlations as a way to study causal influences in longitudinal panel data. The current article, however, shows that if stability of constructs is to some extent of a trait-like, time-invariant nature, the autoregressive relationships of the CLPM fail to adequately account for this. As a result, the lagged parameters that are obtained with the CLPM do not represent the actual within-person relationships over time, and this may lead to erroneous conclusions regarding the presence, predominance, and sign of causal influences. In this article we present an alternative model that separates the within-person process from stable between-person differences through the inclusion of random intercepts, and we discuss how this model is related to existing structural equation models that include cross-lagged relationships. We derive the analytical relationship between the cross-lagged parameters from the CLPM and the alternative model, and use simulations to demonstrate the spurious results that may arise when using the CLPM to analyze data that include stable, trait-like individual differences. We also present a modeling strategy to avoid this pitfall and illustrate this using an empirical data set. The implications for both existing and future cross-lagged panel research are discussed. (c) 2015 APA, all rights reserved).

Calculating Preference Weights for the Labor and Delivery Index: A Discrete Choice Experiment on Women's Birth Experiences.

PubMed

Gärtner, Fania R; de Bekker-Grob, Esther W; Stiggelbout, Anne M; Rijnders, Marlies E; Freeman, Liv M; Middeldorp, Johanna M; Bloemenkamp, Kitty W M; de Miranda, Esteriek; van den Akker-van Marle, M Elske

2015-09-01

The aim of this study was to calculate preference weights for the Labor and Delivery Index (LADY-X) to make it suitable as a utility measure for perinatal care studies. In an online discrete choice experiment, 18 pairs of hypothetical scenarios were presented to respondents, from which they had to choose a preferred option. The scenarios describe the birth experience in terms of the seven LADY-X attributes. A D-efficient discrete choice experiment design with priors based on a small sample (N = 110) was applied. Two samples were gathered, women who had recently given birth and subjects from the general population. Both samples were analyzed separately using a panel mixed logit (MMNL) model. Using the panel mixed multinomial logit (MMNL) model results and accounting for preference heterogeneity, we calculated the average preference weights for LADY-X attribute levels. These were transformed to represent a utility score between 0 and 1, with 0 representing the worst and 1 representing the best birth experience. In total, 1097 women who had recently given birth and 367 subjects from the general population participated. Greater value was placed on differences between bottom and middle attribute levels than on differences between middle and top levels. The attributes that resulted in larger utility increases than the other attributes were "feeling of safety" in the sample of women who had recently given birth and "feeling of safety" and "availability of professionals" in the general population sample. By using the derived preference weights, LADY-X has the potential to be used as a utility measure for perinatal (cost-) effectiveness studies. Copyright © 2015 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Healthcare Quality Indicators for Physiotherapy Management in Hip and Knee Osteoarthritis and Rheumatoid Arthritis: A Delphi Study.

PubMed

Peter, W F; Hurkmans, E J; van der Wees, P J; Hendriks, E J M; van Bodegom-Vos, L; Vliet Vlieland, T P M

2016-12-01

The aim of the present study was to develop healthcare quality indicators (HCQIs) for the physiotherapy (PT) management of patients with hip or knee osteoarthritis (HKOA) or rheumatoid arthritis (RA) in the Netherlands. Two multidisciplinary expert panels, including patients, were instituted. A draft HCQI set was derived from recommendations included in two existing Dutch PT guidelines for HKOA and RA. The panels suggested additional topics, after which a Delphi procedure was performed. All propositions were scored for their potential to represent good-quality PT care (score range 0-9). Based on predefined rules, the Delphi panel HCQIs were discussed and selected. Lastly, every indicator was rephrased, resulting in its output consisting of a numerator and denominator, to facilitate comparisons within and among practices. After two Delphi rounds, two final sets of 17 HCQI - one for HKOA and one for RA - were composed, both containing 16 process indicators (regarding initial assessment, treatment and evaluation) and one outcome indicator. Two sets of HCQIs for PT management in HKOA and RA were developed for measuring the quality of PT care in daily clinical practice. Each indicator was formulated in a measurable way. Future research should focus on the feasibility of both indicator sets for daily clinical practice. Copyright © 2016 John Wiley & Sons, Ltd.

Improvement of Predictive Ability by Uniform Coverage of the Target Genetic Space

PubMed Central

Bustos-Korts, Daniela; Malosetti, Marcos; Chapman, Scott; Biddulph, Ben; van Eeuwijk, Fred

2016-01-01

Genome-enabled prediction provides breeders with the means to increase the number of genotypes that can be evaluated for selection. One of the major challenges in genome-enabled prediction is how to construct a training set of genotypes from a calibration set that represents the target population of genotypes, where the calibration set is composed of a training and validation set. A random sampling protocol of genotypes from the calibration set will lead to low quality coverage of the total genetic space by the training set when the calibration set contains population structure. As a consequence, predictive ability will be affected negatively, because some parts of the genotypic diversity in the target population will be under-represented in the training set, whereas other parts will be over-represented. Therefore, we propose a training set construction method that uniformly samples the genetic space spanned by the target population of genotypes, thereby increasing predictive ability. To evaluate our method, we constructed training sets alongside with the identification of corresponding genomic prediction models for four genotype panels that differed in the amount of population structure they contained (maize Flint, maize Dent, wheat, and rice). Training sets were constructed using uniform sampling, stratified-uniform sampling, stratified sampling and random sampling. We compared these methods with a method that maximizes the generalized coefficient of determination (CD). Several training set sizes were considered. We investigated four genomic prediction models: multi-locus QTL models, GBLUP models, combinations of QTL and GBLUPs, and Reproducing Kernel Hilbert Space (RKHS) models. For the maize and wheat panels, construction of the training set under uniform sampling led to a larger predictive ability than under stratified and random sampling. The results of our methods were similar to those of the CD method. For the rice panel, all training set construction methods led to similar predictive ability, a reflection of the very strong population structure in this panel. PMID:27672112

Home is where the future is: The BrightFocus Foundation consensus panel on dementia care.

PubMed

Samus, Quincy M; Black, Betty Smith; Bovenkamp, Diane; Buckley, Michael; Callahan, Christopher; Davis, Karen; Gitlin, Laura N; Hodgson, Nancy; Johnston, Deirdre; Kales, Helen C; Karel, Michele; Kenney, John Jay; Ling, Shari M; Panchal, Maï; Reuland, Melissa; Willink, Amber; Lyketsos, Constantine G

2018-01-01

A national consensus panel was convened to develop recommendations on future directions for home-based dementia care (HBDC). The panel summarized advantages and challenges of shifting to HBDC as the nexus of care and developed consensus-based recommendations. The panel developed five core recommendations: (1) HBDC should be considered the nexus of new dementia models, from diagnosis to end of life in dementia; (2) new payment models are needed to support HBDC and reward integration of care; (3) a diverse new workforce that spans the care continuum should be prepared urgently; (4) new technologies to promote communication, monitoring/safety, and symptoms management must be tested, integrated, and deployed; and (5) targeted dissemination efforts for HBDC must be employed. HBDC represents a promising paradigm shift to improve care for those living with dementia and their family caregivers: these recommendations provide a framework to chart a course forward for HBDC. Copyright © 2017 the Alzheimer's Association. All rights reserved.

Spacecraft with gradual acceleration of solar panels

NASA Technical Reports Server (NTRS)

Merhav, Tamir R. (Inventor); Festa, Michael T. (Inventor); Stetson, Jr., John B. (Inventor)

1996-01-01

A spacecraft (8) includes a movable appendage such as solar panels (12) operated by a stepping motor (28) driven by pulses (311). In order to reduce vibration andor attitude error, the drive pulses are generated by a clock down-counter (312) with variable count ratio. Predetermined desired clock ratios are stored in selectable memories (314a-d), and the selected ratio (R) is coupled to a comparator (330) together with the current ratio (C). An up-down counter (340) establishes the current count-down ratio by counting toward the desired ratio under the control of the comparator; thus, a step change of solar panel speed never occurs. When a direction change is commanded, a flag signal generator (350) disables the selectable memories, and enables a further store (360), which generates a count ratio representing a very slow solar panel rotational rate, so that the rotational rate always slows to a low value before direction is changed. The principles of the invention are applicable to any movable appendage.

Light-weight sandwich panel honeycomb core with hybrid carbon-glass fiber composite skin for electric vehicle application

NASA Astrophysics Data System (ADS)

Cahyono, Sukmaji Indro; Widodo, Angit; Anwar, Miftahul; Diharjo, Kuncoro; Triyono, Teguh; Hapid, A.; Kaleg, S.

2016-03-01

The carbon fiber reinforced plastic (CFRP) composite is relative high cost material in current manufacturing process of electric vehicle body structure. Sandwich panels consisting polypropylene (PP) honeycomb core with hybrid carbon-glass fiber composite skin were investigated. The aim of present paper was evaluate the flexural properties and bending rigidity of various volume fraction carbon-glass fiber composite skins with the honeycomb core. The flexural properties and cost of panels were compared to the reported values of solid hybrid Carbon/Glass FRP used for the frame body structure of electric vehicle. The finite element model of represented sandwich panel was established to characterize the flexural properties of material using homogenization technique. Finally, simplified model was employed to crashworthiness analysis for engine hood of the body electric vehicle structure. The good cost-electiveness of honeycomb core with hybrid carbon-glass fiber skin has the potential to be used as a light-weight alternative material in body electric vehicle fabricated.

Sandwich Panels Evaluated With Ultrasonic Spectroscopy

NASA Technical Reports Server (NTRS)

Cosgriff, Laura M.

2004-01-01

Enhanced, lightweight material systems, such as 17-4PH stainless steel sandwich panels are being developed for use as fan blades and fan containment systems for next-generation engines. The bond strength between the core and face sheets is critical in maintaining the structural integrity of the sandwich structure. To improve the inspection and production of these systems, researchers at the NASA Glenn Research Center are using nondestructive evaluation (NDE) techniques, such as ultrasonic spectroscopy, to evaluate the brazing quality between the face plates and the metallic foam core. The capabilities and limitations of a swept-frequency approach to ultrasonic spectroscopy were evaluated with respect to these sandwich structures. This report discusses results from three regions of a sandwich panel representing different levels of brazing quality between the outer face plates and a metallic foam core. Each region was investigated with ultrasonic spectroscopy. Then, on the basis of the NDE results, three shear specimens sectioned from the sandwich panel to contain each of these regions were mechanically tested.

Coupled Thermo-Electro-Magneto-Elastic Response of Smart Stiffened Panels

NASA Technical Reports Server (NTRS)

Bednarcyk, Brett A.; Yarrington, Phillip W.

2009-01-01

This report documents the procedures developed for incorporating smart laminate and panel analysis capabilities within the HyperSizer aerospace structural sizing software package. HyperSizer analyzes stiffened panels composed of arbitrary composite laminates through stiffener homogenization, or "smearing " techniques. The result is an effective constitutive equation for the stiffened panel that is suitable for use in a full vehicle-scale finite element analysis via MSC/NASTRAN. The existing thermo-elastic capabilities of HyperSizer have herein been extended to include coupled thermo-electro-magneto-elastic analysis capabilities. This represents a significant step toward realization of design tools capable of guiding the development of the next generation of smart aerospace structures. Verification results are presented that compare the developed smart HyperSizer capability with an ABAQUS piezoelectric finite element solution for a facesheet-flange combination. These results show good agreement between HyperSizer and ABAQUS, but highlight a limitation of the HyperSizer formulation in that constant electric field components are assumed.

Adaptive nonlinear polynomial neural networks for control of boundary layer/structural interaction

NASA Technical Reports Server (NTRS)

Parker, B. Eugene, Jr.; Cellucci, Richard L.; Abbott, Dean W.; Barron, Roger L.; Jordan, Paul R., III; Poor, H. Vincent

1993-01-01

The acoustic pressures developed in a boundary layer can interact with an aircraft panel to induce significant vibration in the panel. Such vibration is undesirable due to the aerodynamic drag and structure-borne cabin noises that result. The overall objective of this work is to develop effective and practical feedback control strategies for actively reducing this flow-induced structural vibration. This report describes the results of initial evaluations using polynomial, neural network-based, feedback control to reduce flow induced vibration in aircraft panels due to turbulent boundary layer/structural interaction. Computer simulations are used to develop and analyze feedback control strategies to reduce vibration in a beam as a first step. The key differences between this work and that going on elsewhere are as follows: that turbulent and transitional boundary layers represent broadband excitation and thus present a more complex stochastic control scenario than that of narrow band (e.g., laminar boundary layer) excitation; and secondly, that the proposed controller structures are adaptive nonlinear infinite impulse response (IIR) polynomial neural network, as opposed to the traditional adaptive linear finite impulse response (FIR) filters used in most studies to date. The controllers implemented in this study achieved vibration attenuation of 27 to 60 dB depending on the type of boundary layer established by laminar, turbulent, and intermittent laminar-to-turbulent transitional flows. Application of multi-input, multi-output, adaptive, nonlinear feedback control of vibration in aircraft panels based on polynomial neural networks appears to be feasible today. Plans are outlined for Phase 2 of this study, which will include extending the theoretical investigation conducted in Phase 2 and verifying the results in a series of laboratory experiments involving both bum and plate models.

Forensic and population genetic characteristics of 62 X chromosome SNPs revealed by multiplex PCR and MALDI-TOF mass spectrometry genotyping in 4 North Eurasian populations.

PubMed

Stepanov, Vadim; Vagaitseva, Ksenyia; Kharkov, Vladimir; Cherednichenko, Anastasia; Bocharova, Anna; Berezina, Galina; Svyatova, Gulnara

2016-01-01

X chromosome genetic markers are widely used in basic population genetic research as well as in forensic genetics. In this paper we analyze the genetic diversity of 62 X chromosome SNPs in 4 populations using multiplex genotyping based on multi-locus PCR and MALDI-TOF mass spectrometry, and report forensic and population genetic features of the panel of X-linked SNPs (XSNPid). Studied populations represent Siberian (Buryat and Khakas), North Asian (Khanty) and Central Asian (Kazakh) native people. Khanty, Khakas and Kazakh population demonstrate average gene diversity over 0.45. Only East Siberian Buryat population is characterized by lower average heterozygosity (0.436). AMOVA analysis of genetic structure reveals a relatively low but significant level of genetic differentiation in a group of 4 population studied (FST=0.023, p=0.0000). The XSNPid panel provides a very high discriminating power in each population. The combined probability of discrimination in females (PDf) for XSNPid panel ranged between populations from 0.99999999999999999999999982 in Khakas to 0.9999999999999999999999963 in Buryats. The combined discriminating power in males (PDm) varies from 0.999999999999999792 to 0.9999999999999999819. The developed multiplex set of X chromosome SNPs can be a useful tool for population genetic studies and for forensic identity and kinship testing. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Biological Effects of Ionising Radiation and Countermeasures (Les effets biologiques des rayonnements ionisants et leurs contre-mesures)

DTIC Science & Technology

2018-01-01

promote cooperative research and information exchange, and secondly an in-house delivery business model where S&T activities are conducted in a NATO...Panel These Panels and Group are the power-house of the collaborative model and are made up of national representatives as well as recognised world...of Radiation Injury and Recovery 1-31 1.3.3.2 Mini-Pig Model of Acute Radiation Syndrome ( ARS ) 1-31 1.3.3.3 Medical Countermeasures (MedCM) 1-32

Design and fabrication of composite wing panels containing a production splice

NASA Technical Reports Server (NTRS)

Reed, D. L.

1975-01-01

Bolted specimens representative of both upper and lower wing surface splices of a transport aircraft were designed and manufactured for static and random load tension and compression fatigue testing including ground-air-ground load reversals. The specimens were fabricated with graphite-epoxy composite material. Multiple tests were conducted at various load levels and the results were used as input to a statistical wearout model. The statically designed specimens performed very well under highly magnified fatigue loadings. Two large panels, one tension and compression, were fabricated for testing by NASA-LRC.

Examination of optimal upgrade timing and best value: DoD acquisition of commercial vs. military custom flat panel displays

NASA Astrophysics Data System (ADS)

Lippitz, Michael J.

1999-08-01

This paper proposes a framework for quantitatively balancing the costs, benefits, and risks of alternate upgrade strategies, with Department of Defense (DoD) acquisition of flat panel display as an example. A key issue in DoD Acquisition Reform is the rapid product turnover in commercial markets and the difficulties DoD has traditionally faced in adopting these advances in a timely manner. This paper aims to clarify when commercial technology represents 'best value' to DoD.

75 FR 42379 - Availability of Seats for the Monterey Bay National Marine Sanctuary Advisory Council

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-21

... the seat for which they are applying; community and professional affiliations; philosophy regarding...'') chaired by the Conservation Representative, and the Business and Tourism Activity Panel (``BTAP'') chaired...

75 FR 16074 - Availability of Seats for the Monterey Bay National Marine Sanctuary Advisory Council

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-31

... experience in relation to the seat for which they are applying; community and professional affiliations... Business and Tourism Activity Panel (``ETAP'') chaired by the Business/Industry Representative, each...

75 FR 61424 - Availability of Seats for the Monterey Bay National Marine Sanctuary Advisory Council

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-05

...-Large (1), Education, Diving, and Tourism. Applicants are chosen based upon their particular expertise... Business and Tourism Activity Panel (``BTAP'') chaired by the Business/Industry Representative, each...

A probabilistic fatigue analysis of multiple site damage

NASA Technical Reports Server (NTRS)

Rohrbaugh, S. M.; Ruff, D.; Hillberry, B. M.; Mccabe, G.; Grandt, A. F., Jr.

1994-01-01

The variability in initial crack size and fatigue crack growth is incorporated in a probabilistic model that is used to predict the fatigue lives for unstiffened aluminum alloy panels containing multiple site damage (MSD). The uncertainty of the damage in the MSD panel is represented by a distribution of fatigue crack lengths that are analytically derived from equivalent initial flaw sizes. The variability in fatigue crack growth rate is characterized by stochastic descriptions of crack growth parameters for a modified Paris crack growth law. A Monte-Carlo simulation explicitly describes the MSD panel by randomly selecting values from the stochastic variables and then grows the MSD cracks with a deterministic fatigue model until the panel fails. Different simulations investigate the influences of the fatigue variability on the distributions of remaining fatigue lives. Six cases that consider fixed and variable conditions of initial crack size and fatigue crack growth rate are examined. The crack size distribution exhibited a dominant effect on the remaining fatigue life distribution, and the variable crack growth rate exhibited a lesser effect on the distribution. In addition, the probabilistic model predicted that only a small percentage of the life remains after a lead crack develops in the MSD panel.

Characterization of the range effect in synthetic aperture radar images of concrete specimens for width estimation

NASA Astrophysics Data System (ADS)

Alzeyadi, Ahmed; Yu, Tzuyang

2018-03-01

Nondestructive evaluation (NDE) is an indispensable approach for the sustainability of critical civil infrastructure systems such as bridges and buildings. Recently, microwave/radar sensors are widely used for assessing the condition of concrete structures. Among existing imaging techniques in microwave/radar sensors, synthetic aperture radar (SAR) imaging enables researchers to conduct surface and subsurface inspection of concrete structures in the range-cross-range representation of SAR images. The objective of this paper is to investigate the range effect of concrete specimens in SAR images at various ranges (15 cm, 50 cm, 75 cm, 100 cm, and 200 cm). One concrete panel specimen (water-to-cement ratio = 0.45) of 30-cm-by-30-cm-by-5-cm was manufactured and scanned by a 10 GHz SAR imaging radar sensor inside an anechoic chamber. Scatterers in SAR images representing two corners of the concrete panel were used to estimate the width of the panel. It was found that the range-dependent pattern of corner scatters can be used to predict the width of concrete panels. Also, the maximum SAR amplitude decreases when the range increases. An empirical model was also proposed for width estimation of concrete panels.

Nonprobability Web Surveys to Measure Sexual Behaviors and Attitudes in the General Population: A Comparison With a Probability Sample Interview Survey

PubMed Central

Burkill, Sarah; Couper, Mick P; Conrad, Frederick; Clifton, Soazig; Tanton, Clare; Phelps, Andrew; Datta, Jessica; Mercer, Catherine H; Sonnenberg, Pam; Prah, Philip; Mitchell, Kirstin R; Wellings, Kaye; Johnson, Anne M; Copas, Andrew J

2014-01-01

Background Nonprobability Web surveys using volunteer panels can provide a relatively cheap and quick alternative to traditional health and epidemiological surveys. However, concerns have been raised about their representativeness. Objective The aim was to compare results from different Web panels with a population-based probability sample survey (n=8969 aged 18-44 years) that used computer-assisted self-interview (CASI) for sensitive behaviors, the third British National Survey of Sexual Attitudes and Lifestyles (Natsal-3). Methods Natsal-3 questions were included on 4 nonprobability Web panel surveys (n=2000 to 2099), 2 using basic quotas based on age and sex, and 2 using modified quotas based on additional variables related to key estimates. Results for sociodemographic characteristics were compared with external benchmarks and for sexual behaviors and opinions with Natsal-3. Odds ratios (ORs) were used to express differences between the benchmark data and each survey for each variable of interest. A summary measure of survey performance was the average absolute OR across variables. Another summary measure was the number of key estimates for which the survey differed significantly (at the 5% level) from the benchmarks. Results For sociodemographic variables, the Web surveys were less representative of the general population than Natsal-3. For example, for men, the average absolute OR for Natsal-3 was 1.14, whereas for the Web surveys the average absolute ORs ranged from 1.86 to 2.30. For all Web surveys, approximately two-thirds of the key estimates of sexual behaviors were different from Natsal-3 and the average absolute ORs ranged from 1.32 to 1.98. Differences were appreciable even for questions asked by CASI in Natsal-3. No single Web survey performed consistently better than any other did. Modified quotas slightly improved results for men, but not for women. Conclusions Consistent with studies from other countries on less sensitive topics, volunteer Web panels provided appreciably biased estimates. The differences seen with Natsal-3 CASI questions, where mode effects may be similar, suggest a selection bias in the Web surveys. The use of more complex quotas may lead to some improvement, but many estimates are still likely to differ. Volunteer Web panels are not recommended if accurate prevalence estimates for the general population are a key objective. PMID:25488851

The Effects of Technological Change on the Labor Force. Hearing before the Technology Policy Task Force of the Committee on Science, Space, and Technology. House of Representatives, One Hundredth Congress, First Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science, Space and Technology.

This document reports on a congressional hearing on the impact of technological advancements on employment. Testimony includes statements and prepared statements from individuals representing conservation of human resources, Columbia University; United Steelworkers of America; The Brookings Institution; Xerox Corporation; and Panel on Technology…

Lightweight composites for modular panelized construction

NASA Astrophysics Data System (ADS)

Vaidya, Amol S.

Rapid advances in construction materials technology have enabled civil engineers to achieve impressive gains in the safety, economy, and functionality of structures built to serve the common needs of society. Modular building systems is a fast-growing modern, form of construction gaining recognition for its increased efficiency and ability to apply modern technology to the needs of the market place. In the modular construction technique, a single structural panel can perform a number of functions such as providing thermal insulation, vibration damping, and structural strength. These multifunctional panels can be prefabricated in a manufacturing facility and then transferred to the construction site. A system that uses prefabricated panels for construction is called a "panelized construction system". This study focuses on the development of pre-cast, lightweight, multifunctional sandwich composite panels to be used for panelized construction. Two thermoplastic composite panels are proposed in this study, namely Composite Structural Insulated Panels (CSIPs) for exterior walls, floors and roofs, and Open Core Sandwich composite for multifunctional interior walls of a structure. Special manufacturing techniques are developed for manufacturing these panels. The structural behavior of these panels is analyzed based on various building design codes. Detailed descriptions of the design, cost analysis, manufacturing, finite element modeling and structural testing of these proposed panels are included in this study in the of form five peer-reviewed journal articles. The structural testing of the proposed panels involved in this study included flexural testing, axial compression testing, and low and high velocity impact testing. Based on the current study, the proposed CSIP wall and floor panels were found satisfactory, based on building design codes ASCE-7-05 and ACI-318-05. Joining techniques are proposed in this study for connecting the precast panels on the construction site. Keywords: Modular panelized construction, sandwich composites, composite structural insulated panels (CSIPs).

Directionality of the relationship between social well-being and subjective well-being: evidence from a 20-year longitudinal study.

PubMed

Joshanloo, Mohsen; Sirgy, M Joseph; Park, Joonha

2018-04-30

Self-determination theory suggests that psycho-social well-being prospectively predicts subjective well-being. In contrast, the broaden-and-build theory of positive emotions suggests that subjective well-being has a positive impact on subsequent levels of psycho-social well-being. The present study sought to empirically disentangle the directionality of the relationship between subjective well-being and social well-being over time. The study used three waves of survey data, with intervals of 10 years, from the Midlife in the United States (MIDUS) project, a representative longitudinal panel study of American adults (N = 2732). Cross-lagged panel modeling was used for data analysis. The results revealed that social well-being predicted increases in subsequent subjective well-being, whereas subjective well-being did not prospectively predict social well-being. Social well-being also demonstrated more stability over time than did subjective well-being. These findings suggest that optimal social functioning is more likely to be an antecedent to subjective well-being, not the other way around. The results are consistent with predictions guided by self-determination theory.

Multivariate approaches for stability control of the olive oil reference materials for sensory analysis - part II: applications.

PubMed

Valverde-Som, Lucia; Ruiz-Samblás, Cristina; Rodríguez-García, Francisco P; Cuadros-Rodríguez, Luis

2018-02-09

The organoleptic quality of virgin olive oil depends on positive and negative sensory attributes. These attributes are related to volatile organic compounds and phenolic compounds that represent the aroma and taste (flavour) of the virgin olive oil. The flavour is the characteristic that can be measured by a taster panel. However, as for any analytical measuring device, the tasters, individually, and the panel, as a whole, should be harmonized and validated and proper olive oil standards are needed. In the present study, multivariate approaches are put into practice in addition to the rules to build a multivariate control chart from chromatographic volatile fingerprinting and chemometrics. Fingerprinting techniques provide analytical information without identify and quantify the analytes. This methodology is used to monitor the stability of sensory reference materials. The similarity indices have been calculated to build multivariate control chart with two olive oils certified reference materials that have been used as examples to monitor their stabilities. This methodology with chromatographic data could be applied in parallel with the 'panel test' sensory method to reduce the work of sensory analysis. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

Progress in defect quantification in multi-layered structures using ultrasonic inspection

NASA Astrophysics Data System (ADS)

Dierken, Josiah; Aldrin, John C.; Holec, Robert; LaCivita, Michael; Shearer, Joshua; Lindgren, Eric

2013-01-01

This study investigates the ability to resolve flaws in aluminum panel stackups representative of aircraft structural components. Using immersion ultrasound techniques, the specimens were examined for known fatigue cracks and electric discharge machined (EDM) notches at various fastener sites. Initial assessments suggested a possible trend between measured ultrasound parameters of flaw intensity and size, and known physical defect length. To improve analytical reliability and efficiency, development of automated data analysis (ADA) algorithms has been initiated.

78 FR 66684 - Atlantic Highly Migratory Species; Advisory Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-06

...) representation of a private, non-governmental, regional, national, or international organization representing... industries, environmental community, academia, and non-governmental organizations are considered for... from commercial and recreational fishing interests, and the environmental/non-governmental organization...

Hospital operations management: improving organizational efficiency.

PubMed

2013-08-01

Reducing operational inefficiencies represents one of the most promising sources of potential savings in hospitals today. Health Forum convened a panel of hospital executives and industry experts to discuss the daunting challenges and big opportunities that lie ahead.

KENNEDY SPACE CENTER, FLA. - NASA Vehicle Manager Scott Thurston talks to the media in the Orbiter Processing Facility. The media was invited to see the orbiter Atlantis as it is being prepared for Return to Flight. Both local and national reporters representing print and TV networks were able to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.

NASA Image and Video Library

2003-09-26

KENNEDY SPACE CENTER, FLA. - NASA Vehicle Manager Scott Thurston talks to the media in the Orbiter Processing Facility. The media was invited to see the orbiter Atlantis as it is being prepared for Return to Flight. Both local and national reporters representing print and TV networks were able to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.

A short generic measure of work stress in the era of globalization: effort-reward imbalance.

PubMed

Siegrist, Johannes; Wege, Natalia; Pühlhofer, Frank; Wahrendorf, Morten

2009-08-01

We evaluate psychometric properties of a short version of the original effort-reward imbalance (ERI) questionnaire. This measure is of interest in the context of assessing stressful work conditions in the era of economic globalization. In a representative sample of 10,698 employed men and women participating in the longitudinal Socio-Economic Panel (SOEP) in Germany, a short version of the ERI questionnaire was included in the 2006 panel wave. Structural equation modeling and logistic regression analysis were applied. In addition to satisfactory internal consistency of scales, a model representing the theoretical structure of the scales provided the best data fit in a competitive test (RMSEA = 0.059, CAIC = 4124.19). Scoring high on the ERI scales was associated with elevated risks of poor self-rated health. This short version of the ERI questionnaire reveals satisfactory psychometric properties, and can be recommended for further use in research and practice.

The Representation of Action Plans in Long Term Memory

NASA Technical Reports Server (NTRS)

Fussfeld, G. N.; Koenig, W.; Karis, D.

1984-01-01

A sequence of experiments conducted on a two hand chord typewriter, to compare the efficiency of different coding principles employed to associate letters with their chord productions is described. This keyboard represents an effort to identify effective alternatives to the existing typewriter. It consists of two seperate 5-key panels (one for each hand), and letters are entered by typing chords composed of one to five fingers. Each panel is capable of producing the full alphabet. One group of experiments was designed to separate between perceptual and motor factors in the acivation of single letter chords. The results underline the importance of perceptual factors in the activation of motor plans. The complexity of the patterns employed to represent letters was shown to account for 50 percent of variance in the typing speeds of single letters. The theoretical implications of these results are discussed in relation to a vision based theory of action plans.

Citizens' perspectives on personalized medicine: a qualitative public deliberation study.

PubMed

Bombard, Yvonne; Abelson, Julia; Simeonov, Dorina; Gauvin, Francois-Pierre

2013-11-01

Our objective was to explore citizens' informed and reasoned values and expectations of personalized medicine, a timely yet novel genomics policy issue. A qualitative, public deliberation study was undertaken using a citizens' reference panel on health technologies, established to provide input to the health technology assessment process in Ontario, Canada. The citizens' panel consisted of five women and nine men, aged 18-71 years, with one member selected from each health authority region. There were shared expectations among the citizens' panel members for the potential of personalized medicine technologies to improve care, provided they are deemed clinically valid and effective. These expectations were tempered by concerns about value for money and the possibility that access to treatment may be limited by personalized medicine tests used to stratify patients. Although they questioned the presumed technological imperative presented by personalized medicine technologies, they called for increased efforts to prepare the health-care system to effectively integrate these technologies. This study represents an early but important effort to explore public values toward personalized medicine. This study also provides evidence of the public's ability to form coherent judgments about a new policy issue. Concerned that personalized tests might be used to ration care, they suggested that treatment should be made available if patients wanted it, irrespective of tests that indicate little benefit. This issue raises clinical and policy challenges that may undermine the value of personalized medicine. Further efforts to deliberate with the public are warranted to inform effective, efficient and equitable translation of personalized medicine.

The Blue Ribbon Panel on Depowered and Advanced Airbags — Status Report on Airbag Performance

PubMed Central

Ferguson, Susan A.; Schneider, Lawrence; Segui-Gomez, Maria; Arbogast, Kristy; Augenstein, Jeffrey; Digges, Kennerly H.

2003-01-01

SUMMARY In February 2000, a group of highway safety organizations sent a letter to the Secretary of the U.S. Department of Transportation expressing concern about a possible return to the 30-mph rigid barrier test using unbelted dummies previously required by Federal Motor Vehicle Safety Standard (FMVSS) 208. The letter asked the National Highway Traffic Safety Administration (NHTSA) to expedite data collection of the real-world crash experience of airbag-equipped vehicles certified to the 30-mph sled test using unbelted dummies because of suggestions that depowered airbags may not provide the same level of protection, particularly to larger, unbelted occupants. For the same reason, the letter also recommended that the auto industry commit funding for additional data collection and to establish a panel of experts to evaluate the data. In response, the Alliance of Automobile Manufacturers (Alliance) committed to funding a 3-year program to be managed by an independent third party. A panel of experts consisting of representatives from the highway safety research community, the National Transportation Safety Board, academia, medical institutions, and the insurance industry was established as the Blue Ribbon Panel (BRP) for Evaluation of Depowered and Advanced Airbags and met for the first time in February 2001. The BRP also includes representatives from NHTSA and the automobile industry who participate as observers. The BRP held its first public meeting in April 2003 to provide an update of its activities and to summarize the real-world evidence on the performance of depowered airbags. This AAAM session will provide a brief summary of the public meeting. PMID:12941215

The Development of the Croatian Competency Framework for Pharmacists.

PubMed

Mucalo, Iva; Hadžiabdić, Maja Ortner; Govorčinović, Tihana; Šarić, Martina; Bruno, Andreia; Bates, Ian

2016-10-25

Objective. To adjust and validate the Global Competency Framework (GbCF) to be relevant for Croatian community and hospital pharmacists. Methods. A descriptive study was conducted in three steps: translation, consensus development, and validation by an expert panel and public consultation. Panel members were representatives from community pharmacies, hospital pharmacies, regulatory and professional bodies, academia, and industry. Results. The adapted framework consists of 96 behavioral statements organized in four clusters: Pharmaceutical Public Health, Pharmaceutical Care, Organization and Management, and Personal and Professional Competencies. When mapped against the 100 statements listed in the GbCF, 27 matched, 39 were revised, 30 were introduced, and 24 were excluded from the original framework. Conclusions. The adaptation and validation proved that GbCF is adaptable to local needs, the Croatian Competency Framework that emerged from it being an example. Key amendments were made within Organization and Management and Pharmaceutical Care clusters, demonstrating that these issues can be country specific.

Performance of fuselage pressure structure

NASA Technical Reports Server (NTRS)

Maclin, James R.

1992-01-01

There are currently more than 1,000 Boeing airplanes around the world over 20 years old. That number is expected to double by the year 1995. With these statistics comes the reality that structural airworthiness will be in the forefront of aviation issues well into the next century. The results of previous and recent test programs Boeing has implemented to study the structural performance of older airplanes relative to pressurized fuselage sections are described. Included in testing were flat panels with multiple site damage (MSD), a full-scale 737 and 2 747s as well as panels representing a 737 and 777, and a generic aircraft in large pressure-test fixtures. Because damage is a normal part of aging, focus is on the degree to which structural integrity is maintained after failure or partial failure of any structural element, including multiple site damage (MSD), and multiple element damage (MED).

Sonic fatigue testing of an advanced composite aileron

NASA Technical Reports Server (NTRS)

Soovere, J.

1982-01-01

The sonic fatigue test program to verify the design of the composite inboard aileron for the L-1011 airplane is described. The composite aileron is fabricated from graphite/epoxy minisandwich covers which are attached to graphite/epoxy front spar and ribs, and to an aluminum rear spar with fasteners. The program covers the development of random fatigue data by means of coupon testing and modal studies on a representative section of the composite aileron, culminating in the accelerated sonic fatigue proof test. The composite aileron sustained nonlinear panel vibration during the proof test without failure. Viscous damping coefficients as low as 0.4% were measured on the panels. The effects of moisture conditioning and elevated temperature on the random fatigue life of both undamaged and impact damaged coupons were investigated. The combination of impact damage, moisture, and a 180 F temperature could reduce the random fatigue life by 50%.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Continuing the tradition established in prior years, this panel encompasses one of the broadest ranges of topics and issues of any panel at the Summer Study. It includes papers addressing all sectors, low-income residential to industrial, and views energy efficiency from many perspectives including programmatic, evaluation, codes, standards, legislation, technical transfer, economic development, and least-cost planning. The papers represent work being performed in most geographic regions of the United States and in the international arena, specifically Thailand, China, Europe, and Scandinavia. This delightful smorgasbord has been organized, based on general content area, into the following eight sessions: (1) new directionsmore » for low-income weatherization; (2) pursuing efficiency through legislation and standards; (3) international perspectives on energy efficiency; (4) technical transfer strategies; (5) government energy policy; (6) commercial codes and standards; (7) innovative programs; and, (8) state-of-the-art review. For these conference proceedings, individual papers are processed separately for the Energy Data Base.« less

Modeling of Sensor Placement Strategy for Shape Sensing and Structural Health Monitoring of a Wing-Shaped Sandwich Panel Using Inverse Finite Element Method.

PubMed

Kefal, Adnan; Yildiz, Mehmet

2017-11-30

This paper investigated the effect of sensor density and alignment for three-dimensional shape sensing of an airplane-wing-shaped thick panel subjected to three different loading conditions, i.e., bending, torsion, and membrane loads. For shape sensing analysis of the panel, the Inverse Finite Element Method (iFEM) was used together with the Refined Zigzag Theory (RZT), in order to enable accurate predictions for transverse deflection and through-the-thickness variation of interfacial displacements. In this study, the iFEM-RZT algorithm is implemented by utilizing a novel three-node C°-continuous inverse-shell element, known as i3-RZT. The discrete strain data is generated numerically through performing a high-fidelity finite element analysis on the wing-shaped panel. This numerical strain data represents experimental strain readings obtained from surface patched strain gauges or embedded fiber Bragg grating (FBG) sensors. Three different sensor placement configurations with varying density and alignment of strain data were examined and their corresponding displacement contours were compared with those of reference solutions. The results indicate that a sparse distribution of FBG sensors (uniaxial strain measurements), aligned in only the longitudinal direction, is sufficient for predicting accurate full-field membrane and bending responses (deformed shapes) of the panel, including a true zigzag representation of interfacial displacements. On the other hand, a sparse deployment of strain rosettes (triaxial strain measurements) is essentially enough to produce torsion shapes that are as accurate as those of predicted by a dense sensor placement configuration. Hence, the potential applicability and practical aspects of i3-RZT/iFEM methodology is proven for three-dimensional shape-sensing of future aerospace structures.

Nonlinear acoustics and honeycomb materials

NASA Astrophysics Data System (ADS)

Thompson, D. O.

2012-05-01

The scope of research activity that Bruce Thompson embraced was very large. In this talk three different research topics that the author shared with Bruce are reviewed. They represent Bruce's introduction to NDE and include nonlinear acoustics, nondestructive measurements of adhesive bond strengths in honeycomb panels, and studies of flexural wave dispersion in honeycomb materials. In the first of these, four harmonics of a 30 Mhz finite amplitude wave were measured for both fused silica and aluminum single crystals with varying lengths and amounts of cold work using a capacity microphone with heterodyne receiver with a flat frequency response from 30 to 250 Mhz. The results for fused silica with no dislocation structure could be described by a model due to Fubini, originally developed for gases, that depends upon only the second and third order elastic constants and not the fourth and higher order constants. The same was not true for the aluminum with dislocation structures. These results raised some questions about models for harmonic generation in materials with dislocations. In the second topic, experiments were made to determine the adhesive bond strengths of honeycomb panels using the vibrational response of the panels (Chladni figures). The results showed that both the damping characteristics of panel vibrations as a whole and velocity of propagation of elastic waves that travel along the surface and sample the bondline can be correlated with destructively determined bond strengths. Finally, the phase velocity of flexural waves traveling along a 1-inch honeycomb sandwich panel was determined from 170 Hz to 50 Khz, ranging from 2.2×104 cm/sec at the low end to 1.18×105 cm/sec at 40 Khz. The dispersion arises from the finite thickness of the panel and agreed with the results of continuum models for the honeycomb. Above 40 Khz, this was not the case. The paper concludes with a tribute to Bruce for his many wonderful contributions and lessons beyond his technical legacy for all of us.

Symptoms and subjective quality of life in post-traumatic stress disorder: a longitudinal study.

PubMed

Giacco, Domenico; Matanov, Aleksandra; Priebe, Stefan

2013-01-01

Evidence suggests that post-traumatic stress disorder (PTSD) is associated with substantially reduced subjective quality of life (SQOL). This study aimed to explore whether and how changes in the levels of PTSD symptom clusters of intrusion, avoidance and hyperarousal are associated with changes in SQOL. Two samples with PTSD following the war in former Yugoslavia were studied, i.e. a representative sample of 530 people in five Balkan countries and a non-representative sample of 215 refugees in three Western European countries. They were assessed on average eight years after the war and re-interviewed one year later. PTSD symptoms were assessed on the Impact of Event Scale - Revised and SQOL on the Manchester Short Assessment of Quality of Life. Linear regression and a two-wave cross lagged panel analysis were used to explore the association between PTSD symptom clusters and SQOL. The findings in the two samples were consistent. Symptom reduction over time was associated with improved SQOL. In multivariable analyses adjusted for the influence of all three clusters, gender and time since war exposure, only changes in hyperarousal symptoms were significantly associated with changes in SQOL. The two-wave cross-lagged panel analysis suggested that the link between hyperarousal symptoms and SQOL is bidirectional. Low SQOL of patients with war-related PTSD is particularly associated with hyperarousal symptoms. The findings suggest a bidirectional influence: a reduction in hyperarousal symptoms may result in improved SQOL, and improvements in SQOL may lead to reduced hyperarousal symptoms.

The 2014 International Pressure Ulcer Guideline: methods and development.

PubMed

Haesler, Emily; Kottner, Jan; Cuddigan, Janet

2017-06-01

A discussion of the methodology used to develop the Prevention and Treatment of Pressure Ulcers: Clinical Practice Guideline. (2014). International experts representing National Pressure Ulcer Advisory Panel, European Pressure Ulcer Advisory Panel and Pan Pacific Pressure Injury Alliance developed the second edition of this clinical guideline. Discussion paper - methodology. A comprehensive search for papers published up to July 2013 was conducted in 11 databases and identified 4286 studies. After critical appraisal, 356 studies were included and assigned a level of evidence. Guideline recommendations provide guidance on best practice in pressure ulcer prevention and treatment. Understanding the development process of a guideline increases the meaningfulness of recommendations to clinicians. Five hundred and seventy five recommendations arose from the research and its interpretation. The body of evidence supporting each recommendation was assigned a strength of evidence. A strength of recommendation was assigned to recommendation statements using the GRADE system. Recommendations are primarily supported by a body of evidence rated as C (87% of recommendations), representing low quality and/or indirect evidence (30%) and expert opinion (57%). Two hundred and forty seven recommendations (43%) received a strong recommendation ('Do it'). Recommendations were developed with consideration to research of the highest methodological quality evidence and studies that add to clinical insight and provide guidance for areas of care where minimal research has been conducted. Recommendations in the guideline reflect best practice and should be implemented with consideration to local context and resources and the individual's preferences and needs. © 2016 John Wiley & Sons Ltd.

Honeycomb vs. Foam: Evaluating Potential Upgrades to ISS Module Shielding

NASA Technical Reports Server (NTRS)

Ryan, Shannon J.; Christiansen, Eric L.

2009-01-01

The presence of honeycomb cells in a dual-wall structure is advantageous for mechanical performance and low weight in spacecraft primary structures but detrimental for shielding against impact of micrometeoroid and orbital debris particles (MMOD). The presence of honeycomb cell walls acts to restrict the expansion of projectile and bumper fragments, resulting in the impact of a more concentrated (and thus lethal) fragment cloud upon the shield rear wall. The Multipurpose Laboratory Module (MLM) is a Russian research module scheduled for launch and ISS assembly in 2011 (currently under review). Baseline shielding of the MLM is expected to be predominantly similar to that of the existing Functional Energy Block (FGB), utilizing a baseline triple wall configuration with honeycomb sandwich panels for the dual bumpers and a thick monolithic aluminum pressure wall. The MLM module is to be docked to the nadir port of the Zvezda service module and, as such, is subject to higher debris flux than the FGB module (which is aligned along the ISS flight vector). Without upgrades to inherited shielding, the MLM penetration risk is expected to be significantly higher than that of the FGB module. Open-cell foam represents a promising alternative to honeycomb as a sandwich panel core material in spacecraft primary structures as it provides comparable mechanical performance with a minimal increase in weight while avoiding structural features (i.e. channeling cells) detrimental to MMOD shielding performance. In this study, the effect of replacing honeycomb sandwich panel structures with metallic open-cell foam structures on MMOD shielding performance is assessed for an MLM-representative configuration. A number of hypervelocity impact tests have been performed on both the baseline honeycomb configuration and upgraded foam configuration, and differences in target damage, failure limits, and derived ballistic limit equations are discussed.

Using the modified Delphi method to establish clinical consensus for the diagnosis and treatment of patients with rotator cuff pathology.

PubMed

Eubank, Breda H; Mohtadi, Nicholas G; Lafave, Mark R; Wiley, J Preston; Bois, Aaron J; Boorman, Richard S; Sheps, David M

2016-05-20

Patients presenting to the healthcare system with rotator cuff pathology do not always receive high quality care. High quality care occurs when a patient receives care that is accessible, appropriate, acceptable, effective, efficient, and safe. The aim of this study was twofold: 1) to develop a clinical pathway algorithm that sets forth a stepwise process for making decisions about the diagnosis and treatment of rotator cuff pathology presenting to primary, secondary, and tertiary healthcare settings; and 2) to establish clinical practice guidelines for the diagnosis and treatment of rotator cuff pathology to inform decision-making processes within the algorithm. A three-step modified Delphi method was used to establish consensus. Fourteen experts representing athletic therapy, physiotherapy, sport medicine, and orthopaedic surgery were invited to participate as the expert panel. In round 1, 123 best practice statements were distributed to the panel. Panel members were asked to mark "agree" or "disagree" beside each statement, and provide comments. The same voting method was again used for round 2. Round 3 consisted of a final face-to-face meeting. In round 1, statements were grouped and reduced to 44 statements that met consensus. In round 2, five statements reached consensus. In round 3, ten statements reached consensus. Consensus was reached for 59 statements representing five domains: screening, diagnosis, physical examination, investigations, and treatment. The final face-to-face meeting was also used to develop clinical pathway algorithms (i.e., clinical care pathways) for three types of rotator cuff pathology: acute, chronic, and acute-on-chronic. This consensus guideline will help to standardize care, provide guidance on the diagnosis and treatment of rotator cuff pathology, and assist in clinical decision-making for all healthcare professionals.

Establishment of a panel of in-house polyclonal antibodies for the diagnosis of enterovirus infections.

PubMed

Kotani, Osamu; Iwata-Yoshikawa, Naoko; Suzuki, Tadaki; Sato, Yuko; Nakajima, Noriko; Koike, Satoshi; Iwasaki, Takuya; Sata, Tetsutaro; Yamashita, Teruo; Minagawa, Hiroko; Taguchi, Fumihiro; Hasegawa, Hideki; Shimizu, Hiroyuki; Nagata, Noriyo

2015-04-01

The aim of this study was to establish a reliable method of virus detection for the diagnosis of critical enterovirus infections such as acute infective encephalitis, encephalomyelitis and myocarditis. Because histopathological and immunohistochemical analyses of paraffin-embedded tissues play an important role in recognizing infectious agents in tissue samples, six in-house polyclonal antibodies raised against three representative enteroviruses using an indirect immunofluorescence assay and immunohistochemistry were examined. This panel of polyclonal antibodies recognized three serotypes of enterovirus. Two of the polyclonal antibodies were raised against denatured virus particles from enterovirus A71, one was raised against the recombinant VP1 protein of coxsackievirus B3, and the other for poliovirus type 1 were raised against denatured virus particles, the recombinant VP1 protein and peptide 2C. Western blot analysis revealed that each of these antibodies recognized the corresponding viral antigen and none cross-reacted with non-enteroviruses within the family Picornaviridae. However, all cross-reacted to some extent with the antigens derived from other serotypes of enterovirus. Indirect immunofluorescence assay and immunohistochemistry revealed that the virus capsid and non-structural proteins were localized in the cytoplasm of affected culture cells, and skeletal muscles and neurons in neonatal mice experimentally-infected with human enterovirus. The antibodies also recognized antigens derived from recent clinical isolates of enterovirus A71, coxsackievirus B3 and poliovirus. In addition, immunohistochemistry revealed that representative antibodies tested showed the same recognition pattern according to each serotype. Thus, the panel of in-house anti-enterovirus polyclonal antibodies described herein will be an important tool for the screening and pathological diagnosis for enterovirus infections, and may be useful for the classification of different enterovirus serotypes, including coxsackieviruses A and B, echoviruses, enterovirus A71 and poliovirus. © 2014 Japanese Society of Neuropathology.

Correlation of Structural Analysis and Test Results for the McDonnell Douglas Stitched/RFI All-Composite Wing Stub Box

NASA Technical Reports Server (NTRS)

Wang, John T.; Jegley, Dawn C.; Bush, Harold G.; Hinrichs, Stephen C.

1996-01-01

The analytical and experimental results of an all-composite wing stub box are presented in this report. The wing stub box, which is representative of an inboard portion of a commercial transport high-aspect-ratio wing, was fabricated from stitched graphite-epoxy material with a Resin Film Infusion manufacturing process. The wing stub box was designed and constructed by the McDonnell Douglas Aerospace Company as part of the NASA Advanced Composites Technology program. The test article contained metallic load-introduction structures on the inboard and outboard ends of the graphite-epoxy wing stub box. The root end of the inboard load introduction structure was attached to a vertical reaction structure, and an upward load was applied to the outermost tip of the outboard load introduction structure to induce bending of the wing stub box. A finite element model was created in which the center portion of the wing-stub-box upper cover panel was modeled with a refined mesh. The refined mesh was required to represent properly the geometrically nonlinear structural behavior of the upper cover panel and to predict accurately the strains in the stringer webs of the stiffened upper cover panel. The analytical and experimental results for deflections and strains are in good agreement.

Vibro-acoustic model of an active aircraft cabin window

NASA Astrophysics Data System (ADS)

Aloufi, Badr; Behdinan, Kamran; Zu, Jean

2017-06-01

This paper presents modeling and design of an active structural acoustic control (ASAC) system for controlling the low frequency sound field transmitted through an aircraft cabin window. The system uses stacked piezoelectric elements arranged in a manner to generate out-of-plane actuation point forces acting on the window panel boundaries. A theoretical vibro-acoustic model for an active quadruple-panel system is developed to characterize the dynamic behavior of the system and achieve a good understanding of the active control performance and the physical phenomena of the sound transmission loss (STL) characteristics. The quadruple-panel system represents the passenger window design used in some classes of modern aircraft with an exterior double pane of Plexiglas, an interior dust cover pane and a glazed dimmable pane, all separated by thin air cavities. The STL characteristics of identical pane window configurations with different piezoelectric actuator sets are analyzed. A parametric study describes the influence of important active parameters, such as the input voltage, number and location of the actuator elements, on the STL is investigated. In addition, a mathematical model for obtaining the optimal input voltage is developed to improve the acoustic attenuation capability of the control system. In general, the achieved results indicate that the proposed ASAC design offers a considerable improvement in the passive sound loss performance of cabin window design without significant effects, such as weight increase, on the original design. Also, the results show that the acoustic control of the active model with piezoelectric actuators bonded to the dust cover pane generates high structural vibrations in the radiating panel (dust cover) and an increase in sound power radiation. High active acoustic attenuation can be achieved by designing the ASAC system to apply active control forces on the inner Plexiglas panel or dimmable panel by installing the actuators on the boundaries of one of the two panels. In some cases, increasing the actuator numbers in the structure advances the active control performance by controlling more structural modes; however, this decreases the STL of the passive control system because of the increase in structure-borne sound transmission paths of the stiffer piezoelectric actuators.

Test and Analysis of Foam Impacting a 6x6 Inch RCC Flat Panel

NASA Technical Reports Server (NTRS)

Lessard, Wendy B.

2006-01-01

This report presents the testing and analyses of a foam projectile impacting onto thirteen 6x6 inch flat panels at a 90 degrees incidence angle. The panels tested in this investigation were fabricated of Reinforced-Carbon-Carbon material and were used to aid in the validation of an existing material model, MAT58. The computational analyses were performed using LS-DYNA, which is a physics-based, nonlinear, transient, finite element code used for analyzing material responses subjected to high impact forces and other dynamic conditions. The test results were used to validate LS-DYNA predictions and to determine the threshold of damage generated by the MAT58 cumulative damage material model. The threshold of damage parameter represents any external or internal visible RCC damage detectable by nondestructive evaluation techniques.

Vegetation management in sensitive areas of the Lake Tahoe Basin: A workshop to evaluate risks and advance existing strategies and practices [Independent review panel report

Treesearch

William Elliot; Wally Miller; Bruce Hartsough; Scott Stephens

2009-01-01

Elected officials, agency representatives and stakeholders representing many segments of the Lake Tahoe Basin community have all raised concerns over the limited progress in reducing excess vegetation biomass in Stream Environment Zones (SEZ) and on steep slopes (collectively referred to as sensitive areas) in the Lake Tahoe Basin. Limited access, the potential for...

Rapid and Accurate Behavioral Health Diagnostic Screening: Initial Validation Study of a Web-Based, Self-Report Tool (the SAGE-SR).

PubMed

Brodey, Benjamin; Purcell, Susan E; Rhea, Karen; Maier, Philip; First, Michael; Zweede, Lisa; Sinisterra, Manuela; Nunn, M Brad; Austin, Marie-Paule; Brodey, Inger S

2018-03-23

The Structured Clinical Interview for DSM (SCID) is considered the gold standard assessment for accurate, reliable psychiatric diagnoses; however, because of its length, complexity, and training required, the SCID is rarely used outside of research. This paper aims to describe the development and initial validation of a Web-based, self-report screening instrument (the Screening Assessment for Guiding Evaluation-Self-Report, SAGE-SR) based on the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) and the SCID-5-Clinician Version (CV) intended to make accurate, broad-based behavioral health diagnostic screening more accessible within clinical care. First, study staff drafted approximately 1200 self-report items representing individual granular symptoms in the diagnostic criteria for the 8 primary SCID-CV modules. An expert panel iteratively reviewed, critiqued, and revised items. The resulting items were iteratively administered and revised through 3 rounds of cognitive interviewing with community mental health center participants. In the first 2 rounds, the SCID was also administered to participants to directly compare their Likert self-report and SCID responses. A second expert panel evaluated the final pool of items from cognitive interviewing and criteria in the DSM-5 to construct the SAGE-SR, a computerized adaptive instrument that uses branching logic from a screener section to administer appropriate follow-up questions to refine the differential diagnoses. The SAGE-SR was administered to healthy controls and outpatient mental health clinic clients to assess test duration and test-retest reliability. Cutoff scores for screening into follow-up diagnostic sections and criteria for inclusion of diagnoses in the differential diagnosis were evaluated. The expert panel reduced the initial 1200 test items to 664 items that panel members agreed collectively represented the SCID items from the 8 targeted modules and DSM criteria for the covered diagnoses. These 664 items were iteratively submitted to 3 rounds of cognitive interviewing with 50 community mental health center participants; the expert panel reviewed session summaries and agreed on a final set of 661 clear and concise self-report items representing the desired criteria in the DSM-5. The SAGE-SR constructed from this item pool took an average of 14 min to complete in a nonclinical sample versus 24 min in a clinical sample. Responses to individual items can be combined to generate DSM criteria endorsements and differential diagnoses, as well as provide indices of individual symptom severity. Preliminary measures of test-retest reliability in a small, nonclinical sample were promising, with good to excellent reliability for screener items in 11 of 13 diagnostic screening modules (intraclass correlation coefficient [ICC] or kappa coefficients ranging from .60 to .90), with mania achieving fair test-retest reliability (ICC=.50) and other substance use endorsed too infrequently for analysis. The SAGE-SR is a computerized adaptive self-report instrument designed to provide rigorous differential diagnostic information to clinicians. ©Benjamin Brodey, Susan E Purcell, Karen Rhea, Philip Maier, Michael First, Lisa Zweede, Manuela Sinisterra, M Brad Nunn, Marie-Paule Austin, Inger S Brodey. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 23.03.2018.

Discovery of SNPs for individual identification by reduced representation sequencing of moose (Alces alces).

PubMed

Blåhed, Ida-Maria; Königsson, Helena; Ericsson, Göran; Spong, Göran

2018-01-01

Monitoring of wild animal populations is challenging, yet reliable information about population processes is important for both management and conservation efforts. Access to molecular markers, such as SNPs, enables population monitoring through genotyping of various DNA sources. We have developed 96 high quality SNP markers for individual identification of moose (Alces alces), an economically and ecologically important top-herbivore in boreal regions. Reduced representation libraries constructed from 34 moose were high-throughput de novo sequenced, generating nearly 50 million read pairs. About 50 000 stacks of aligned reads containing one or more SNPs were discovered with the Stacks pipeline. Several quality criteria were applied on the candidate SNPs to find markers informative on the individual level and well representative for the population. An empirical validation by genotyping of sequenced individuals and additional moose, resulted in the selection of a final panel of 86 high quality autosomal SNPs. Additionally, five sex-specific SNPs and five SNPs for sympatric species diagnostics are included in the panel. The genotyping error rate was 0.002 for the total panel and probability of identities were low enough to separate individuals with high confidence. Moreover, the autosomal SNPs were highly informative also for population level analyses. The potential applications of this SNP panel are thus many including investigations of population size, sex ratios, relatedness, reproductive success and population structure. Ideally, SNP-based studies could improve today's population monitoring and increase our knowledge about moose population dynamics.

EDRN Breast and Ovary Cancer CVC, Study 2: Phase 3 retrospective validation of ovarian cancer early detection markers in serial preclinical samples from the PLCO trial — EDRN Public Portal

Cancer.gov

Over 70% of women with ovarian/fallopian tube cancer (OC) are diagnosed with advanced stage disease which has a 5-year relative survival rate of 30%. Five-year survival is 90% when disease is confined to the ovaries, but overall survival is poor because only 25% of cases are found early. Screening for ovarian cancer using tools with high sensitivity is potentially cost-effective, but because OC is so rare, very high specificity is needed to achieve an acceptable PPV. We have conducted preliminary work both in clinical and in preclinical (CARET) samples. We have identified candidate markers, developed assays for novel markers including HE4 and MSLN, and evaluated their diagnostic performance. We evaluated the markers’ contribution to a diagnostic panel in a standard set in order to identify the best of the candidates and developed methods for combining markers to define a decision rule for a marker panel. We found that our PEB rule yields comparable performance to the Single Threshold (ST) rule 2 years earlier, using the same two markers. The PEB makes an even larger contribution with the 4-marker panel. The 4-marker panel with the PEB rule represents a substantial improvement over any of the other decision rules as a first-line screen to select women for imaging. Our goal in the proposed work is to estimate the improvement in performance possible in the PLCO serial samples.

An adaptive, comprehensive monitoring strategy for chemicals of emerging concern (CECs) in California's Aquatic Ecosystems.

PubMed

Maruya, Keith A; Schlenk, Daniel; Anderson, Paul D; Denslow, Nancy D; Drewes, Jörg E; Olivieri, Adam W; Scott, Geoffrey I; Snyder, Shane A

2014-01-01

A scientific advisory panel was convened by the State of California to recommend monitoring for chemicals of emerging concern (CECs) in aquatic systems that receive discharge of municipal wastewater treatment plant (WWTP) effluent and stormwater runoff. The panel developed a risk-based screening framework that considered environmental sources and fate of CECs observed in receiving waters across the State. Using existing occurrence and risk threshold data in water, sediment, and biological tissue, the panel applied the framework to identify a priority list of CECs for initial monitoring in three representative receiving water scenarios. The initial screening list of 16 CECs identified by the panel included consumer and commercial chemicals, flame retardants, pesticides, pharmaceuticals and personal care products, and natural hormones. The panel designed an iterative, phased strategy with interpretive guidelines that direct and update management actions commensurate with potential risk identified using the risk-based framework and monitoring data. Because of the ever-changing nature of chemical use, technology, and management practices, the panel offered recommendations to improve CEC monitoring, including development of bioanalytical screening methods whose responses integrate exposure to complex mixtures and that can be linked to higher-order effects; development or refinement of models that predict the input, fate, and effects of future chemicals; and filling of key data gaps on CEC occurrence and toxicity. Finally, the panel stressed the need for adaptive management, allowing for future review of, and if warranted, modifications to the strategy to incorporate the latest science available to the water resources community. © 2013 SETAC.

Development of a Pressure Box to Evaluate Reusable-Launch-Vehicle Cryogenic-Tank Panels

NASA Technical Reports Server (NTRS)

Ambur, Damodar R.; Sikora, Joseph; Maguire, James F.; Winn, Peter M.

1996-01-01

A cryogenic pressure-box test machine has been designed and is being developed to test full-scale reusable-launch-vehicle cryogenic-tank panels. This machine is equipped with an internal pressurization system, a cryogenic cooling system, and a heating system to simulate the mechanical and thermal loading conditions that are representative of a reusable-launch-vehicle mission profile. The cryogenic cooling system uses liquid helium and liquid nitrogen to simulate liquid hydrogen and liquid oxygen tank internal temperatures. A quartz lamp heating system is used for heating the external surface of the test panels to simulate cryogenic-tank external surface temperatures during re-entry of the launch vehicle. The pressurization system uses gaseous helium and is designed to be controlled independently of the cooling system. The tensile loads in the axial direction of the test panel are simulated by means of hydraulic actuators and a load control system. The hoop loads in the test panel are reacted by load-calibrated turnbuckles attached to the skin and frame elements of the test panel. The load distribution in the skin and frames can be adjusted to correspond to the tank structure by using these turnbuckles. The seal between the test panel and the cryogenic pressure box is made from a reinforced Teflon material which can withstand pressures greater than 52 psig at cryogenic temperatures. Analytical results and tests on prototype test components indicate that most of the cryogenic-tank loading conditions that occur in flight can be simulated in the cryogenic pressure-box test machine.

Usage patterns of aromatherapy among the French general population: A descriptive study focusing on dermal exposure.

PubMed

Dornic, N; Ficheux, A S; Roudot, A C; Saboureau, D; Ezzedine, K

2016-04-01

Although likely benefits of aromatherapy are well documented, little is known about essential oils consumption and exposure to molecules present in the oils. The aim of our study was to determine usage patterns of 12 types of essential oils among a quite large panel, sorted per sex and quintile of age from birth to 70. A survey was conducted in September 2014 among 1507 French individuals, selected to build a representative panel of the general population. The key point of our study, apart from the fact that it has never been done among general population, was the focus on dermal exposure. Information about types of essential oils used, skin areas exposed, frequencies and quantities were collected. Our work revealed that some sub-populations could be significantly exposed to molecules of toxicological concern, especially in terms of skin sensitization. This work is the first step to assess human exposure to these molecules, and will help safety authorities and risk managers to protect the population. Copyright © 2016 Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gibson-Grant, Amy

Postwave tracking study for the Energy Efficiency Adult Campaign This study serves as measure of key metrics among the campaign’s target audience, homeowners age 25+. Key measures include: Awareness of messages relating to the broad issue; Recognition of the PSAs; Relevant attitudes, including interest, ease of taking energy efficient steps, and likelihood to act; Relevant knowledge, including knowledge of light bulb alternatives and energy efficient options; and Relevant behaviors, including specific energy-saving behaviors mentioned within the PSAs. Wave 1: May 27 – June 7, 2011 Wave 2: May 29 – June 8, 2012 Wave 3: May 29 – June 19,more » 2014 General market sample of adults 25+ who own their homes W1 sample: n = 704; W2: n=701; W3: n=806 Online Survey Panel Methodology Study was fielded by Lightspeed Research among their survey panel. Sample is US Census representative of US homeowners by race/ethnicity, income, age, region, and family status. At least 30% of respondents were required to have not updated major appliances in their home in the past 5 years (dishwasher, stove, refrigerator, washer, or dryer).« less

Comparison Between the Four-kallikrein Panel and Prostate Health Index for Predicting Prostate Cancer.

PubMed

Nordström, Tobias; Vickers, Andrew; Assel, Melissa; Lilja, Hans; Grönberg, Henrik; Eklund, Martin

2015-07-01

The four-kallikrein panel and the Prostate Health Index (PHI) have been shown to improve prediction of prostate cancer (PCa) compared with prostate-specific antigen (PSA). No comparison of the four-kallikrein panel and PHI has been presented. To compare the four-kallikrein panel and PHI for predicting PCa in an independent cohort. Participants were from a population-based cohort of PSA-tested men in Stockholm County. We included 531 men with PSA levels between 3 and 15 ng/ml undergoing first-time prostate biopsy during 2010-2012. Models were fitted to case status. We computed calibration curves, the area under the receiver-operating characteristics curve (AUC), decision curves, and percentage of saved biopsies. The four-kallikrein panel showed AUCs of 69.0 when predicting any-grade PCa and 71.8 when predicting high-grade cancer (Gleason score ≥7). Similar values were found for PHI: 70.4 and 71.1, respectively. Both models had higher AUCs than a base model with PSA value and age (p<0.0001 for both); differences between models were not significant. Sensitivity analyses including men with any PSA level or a previous biopsy did not materially affect our findings. Using 10% predicted risk of high-grade PCa by the four-kallikrein panel or PHI of 39 as cut-off for biopsy saved 29% of performed biopsies at a cost of delayed diagnosis for 10% of the men with high-grade cancers. Both models showed limited net benefit in decision analysis. The main study limitation was lack of digital rectal examination data and biopsy decision being based on PSA information. The four-kallikrein panel and PHI similarly improved discrimination when predicting PCa and high-grade PCa. Both are simple blood tests that can reduce the number of unnecessary biopsies compared with screening with total PSA, representing an important new option to reduce harm. Prostate-specific antigen screening is controversial due to limitations of the test. We found that two blood tests, the Prostate Health Index and the four-kallikrein panel, performed similarly and could both aid in decision making among Swedish men undergoing a prostate biopsy. Copyright © 2014 European Association of Urology. Published by Elsevier B.V. All rights reserved.

NIH state-of-the-science conference statement: Preventing Alzheimer's disease and cognitive decline.

PubMed

Daviglus, Martha L; Bell, Carl C; Berrettini, Wade; Bowen, Phyllis E; Connolly, E Sander; Cox, Nancy Jean; Dunbar-Jacob, Jacqueline M; Granieri, Evelyn C; Hunt, Gail; McGarry, Kathleen; Patel, Dinesh; Potosky, Arnold L; Sanders-Bush, Elaine; Silberberg, Donald; Trevisan, Maurizio

2010-04-28

To provide health care providers, patients, and the general public with a responsible assessment of currently available data on prevention of Alzheimer's disease and cognitive decline. A non-Department of Health and Human Services, nonadvocate 15-member panel representing the fields of preventive medicine, geriatrics, internal medicine, neurology, neurological surgery, psychiatry, mental health, human nutrition, pharmacology, genetic medicine, nursing, health economics, health services research, family caregiving, and a public representative. In addition, 20 experts from pertinent fields presented data to the panel and conference audience. Presentations by experts and a systematic review of the literature prepared by the Duke University Evidence-based Practice Center, through the Agency for Healthcare Research and Quality. Scientific evidence was given precedence over anecdotal experience. The panel drafted its statement based on scientific evidence presented in open forum and on published scientific literature. The draft statement was presented on the final day of the conference and circulated to the audience for comment. The panel released a revised statement later that day at http://consensus.nih.gov. This statement is an independent report of the panel and is not a policy statement of the NIH or the Federal Government. Cognitive decline and Alzheimer’s disease are major causes of morbidity and mortality worldwide and are substantially burdensome to the affected persons, their caregivers, and society in general. Extensive research over the past 20 years has provided important insights on the nature of Alzheimer’s disease and cognitive decline and the magnitude of the problem. Nevertheless, there remain important and formidable challenges in conducting research on these diseases, particularly in the area of prevention. Currently, firm conclusions cannot be drawn about the association of any modifiable risk factor with cognitive decline or Alzheimer’s disease. Highly reliable consensus-based diagnostic criteria for cognitive decline, mild cognitive impairment, and Alzheimer’s disease are lacking, and available criteria have not been uniformly applied. Evidence is insufficient to support the use of pharmaceutical agents or dietary supplements to prevent cognitive decline or Alzheimer’s disease. We recognize that a large amount of promising research is under way; these efforts need to be increased and added to by new understandings and innovations (as noted in our recommendations for future research). For example, ongoing studies including (but not limited to) studies on antihypertensive medications, omega-3 fatty acids, physical activity, and cognitive engagement may provide new insights into the prevention or delay of cognitive decline or Alzheimer’s disease. This important research needs to be supplemented by further studies. Large-scale population-based studies and randomized controlled trials (RCTs) are critically needed to investigate strategies to maintain cognitive function in individuals at risk for decline, to identify factors that may delay the onset of Alzheimer’s disease among persons at risk, and to identify factors that may slow the progression of Alzheimer’s disease among persons in whom the condition is already diagnosed.

Correcting the lobule in otoplasty using the fillet technique.

PubMed

Sadick, Haneen; Artinger, Verena M; Haubner, Frank; Gassner, Holger G

2014-01-01

Correction of the protruded lobule in otoplasty continues to represent an important challenge. The lack of skeletal elements within the lobule makes a controlled lobule repositioning less predictable. OBJECTIVE To present a new surgical technique for lobule correction in otoplasty. Human cadaver studies were performed for detailed anatomical analysis of lobule deformities. In addition, we evaluated a novel algorithmic approach to correction of the lobule in 12 consecutive patients. INTERVENTIONS/EXPOSURES: Otoplasty with surgical correction of lobule using the fillet technique. The surgical outcome in the 12 most recent consecutive patients with at least 3 months of follow-up was assessed retrospectively. The postsurgical results were independently reviewed by a panel of noninvolved experts. The 3 major anatomic components of lobular deformities are the axial angular protrusion, the coronal angular protrusion, and the inherent shape. The fillet technique described in the present report addressed all 3 aspects in an effective way. Clinical data analysis revealed no immediate or long-term complications associated with this new surgical method. The patients' subjective rating and the panel's objective rating revealed "good" to "very good" postoperative results. This newly described fillet technique represents a safe and efficient method to correct protruded ear lobules in otoplasty. It allows precise and predictable positioning of the lobule with an excellent safety profile. 4.

Indication Criteria for Total Knee Arthroplasty in Patients with Osteoarthritis - A Multi-perspective Consensus Study.

PubMed

Schmitt, Jochen; Lange, Toni; Günther, Klaus-Peter; Kopkow, Christian; Rataj, Elisabeth; Apfelbacher, Christian; Aringer, Martin; Böhle, Eckhardt; Bork, Hartmut; Dreinhöfer, Karsten; Friederich, Niklaus; Frosch, Karl-Heinz; Gravius, Sascha; Gromnica-Ihle, Erika; Heller, Karl-Dieter; Kirschner, Stephan; Kladny, Bernd; Kohlhof, Hendrik; Kremer, Michael; Leuchten, Nicolai; Lippmann, Maike; Malzahn, Jürgen; Meyer, Heiko; Sabatowski, Rainer; Scharf, Hanns-Peter; Stoeve, Johannes; Wagner, Richard; Lützner, Jörg

2017-10-01

Background and Objectives Knee osteoarthritis (OA) is a significant public health burden. Rates of total knee arthroplasty (TKA) in OA vary substantially between geographical regions, most likely due to the lack of standardised indication criteria. We set out to define indication criteria for the German healthcare system for TKA in patients with knee OA, on the basis of best evidence and transparent multi-stakeholder consensus. Methods We undertook a complex mixed methods study, including an iterative process of systematic appraisal of existing evidence, Delphi consensus methods and stakeholder conferences. We established a consensus panel representing key German national societies of healthcare providers (orthopaedic surgeons, rheumatologists, pain physicians, psychologists, physiotherapists), payers, and patient representatives. A priori defined consensus criteria were at least 70% agreement and less than 20% disagreement among the consensus panel. Agreement was sought for (1) core indication criteria defined as criteria that must be met to consider TKA in a normal patient with knee OA, (2) additional (not obligatory) indication criteria, (3) absolute contraindication criteria that generally prohibit TKA, and (4) risk factors that do not prohibit TKA, but usually do not lead to a recommendation for TKA. Results The following 5 core indication criteria were agreed within the panel: 1. intermittent (several times per week) or constant knee pain for at least 3 - 6 months; 2. radiological confirmation of structural knee damage (osteoarthritis, osteonecrosis); 3. inadequate response to conservative treatment, including pharmacological and non-pharmacological treatment for at least 3 - 6 months; 4. adverse impact of knee disease on patient's quality of life for at least 3 - 6 months; 5. patient-reported suffering/impairment due to knee disease. Additional indication criteria, contraindication criteria, and risk factors for adverse outcome were also agreed by a large majority within the multi-perspective stakeholder panel. Conclusion The defined indication criteria constitute a prerequisite for appropriate provision of TKA in patients with knee OA in Germany. In eligible patients, shared-decision making should eventually determine if TKA is performed or not. The next important steps are the implementation of the defined indication criteria, and the prospective investigation of predictors of success or failure of TKA in the context of routine care provision in Germany. Georg Thieme Verlag KG Stuttgart · New York.

Coming to grips with consumerism. [Panel answers on utility operations and problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Utility companies, as regulated monopolies, are facing increasing questioning and challenges from consumers. Representatives of the Consumer Federation of America, The Department of Energy, and Edison Electric Institute discuss the kind of information that consumers want and how they can get satisfactory responses from utility companies. The movement, seen as a healthy way for citizens to understand how utilities operate and to learn how to communicate their concerns, is assuming more of a conciliatory than adversary nature. In a panel discussion, the participants outline the issues of communication, rate structure, public relations, utility decision making, and regulation.

Delayed Memory Effects after Intense Stress in Special Forces Candidates: Exploring Path Processes between Cortisol Secretion and Memory Recall

DTIC Science & Technology

2013-05-01

Stress Y ROCF (I & P) M2 NASA TLX Panel B M1 ∆CORT Figure 1. Panel A represents a direct effect of the independent (X; stress treatment) on the...mediators (M1 and M2), and path indices (a1, a2, b1, b2, and c 0). DCORT, change in salivary cortisol concentration; NASA TLX , National Aeronautics...tive mental workload: A comparison of SWAT, NASA - TLX , and workload profile methods. Appl Psychol Int Rev 53:61–86. Salehi B, Cordero I, Sandi C. 2010

NASA Aircraft Controls Research, 1983

NASA Technical Reports Server (NTRS)

Beasley, G. P. (Compiler)

1984-01-01

The workshop consisted of 24 technical presentations on various aspects of aircraft controls, ranging from the theoretical development of control laws to the evaluation of new controls technology in flight test vehicles. A special report on the status of foreign aircraft technology and a panel session with seven representatives from organizations which use aircraft controls technology were also included. The controls research needs and opportunities for the future as well as the role envisioned for NASA in that research were addressed. Input from the panel and response to the workshop presentations will be used by NASA in developing future programs.

Implementing an Antibiotic Stewardship Program: Guidelines by the Infectious Diseases Society of America and the Society for Healthcare Epidemiology of America

PubMed Central

Barlam, Tamar F.; Cosgrove, Sara E.; Abbo, Lilian M.; MacDougall, Conan; Schuetz, Audrey N.; Septimus, Edward J.; Srinivasan, Arjun; Dellit, Timothy H.; Falck-Ytter, Yngve T.; Fishman, Neil O.; Hamilton, Cindy W.; Jenkins, Timothy C.; Lipsett, Pamela A.; Malani, Preeti N.; May, Larissa S.; Moran, Gregory J.; Neuhauser, Melinda M.; Newland, Jason G.; Ohl, Christopher A.; Samore, Matthew H.; Seo, Susan K.; Trivedi, Kavita K.

2016-01-01

Evidence-based guidelines for implementation and measurement of antibiotic stewardship interventions in inpatient populations including long-term care were prepared by a multidisciplinary expert panel of the Infectious Diseases Society of America and the Society for Healthcare Epidemiology of America. The panel included clinicians and investigators representing internal medicine, emergency medicine, microbiology, critical care, surgery, epidemiology, pharmacy, and adult and pediatric infectious diseases specialties. These recommendations address the best approaches for antibiotic stewardship programs to influence the optimal use of antibiotics. PMID:27080992

Development and demonstration of manufacturing processes for fabricating graphite/LARC 160 polyimide structural elements

NASA Technical Reports Server (NTRS)

Frost, R. K.; Jones, J. S.; Dynes, P. J.; Wykes, D. H.

1981-01-01

The development and demonstration of manufacturing technologies for the structural application of Celion graphite/LARC-160 polyimide composite material is discussed. Process development and fabrication of demonstration components are discussed. Process development included establishing quality assurance of the basic composite material and processing, nondestructive inspection of fabricated components, developing processes for specific structural forms, and qualification of processes through mechanical testing. Demonstration components were fabricated. The demonstration components consisted of flat laminates, skin/stringer panels, honeycomb panels, chopped fiber compression moldings, and a technology demonstrator segment (TDS) representative of the space shuttle aft body flap.

The DoE method as an efficient tool for modeling the behavior of monocrystalline Si-PV module

NASA Astrophysics Data System (ADS)

Kessaissia, Fatma Zohra; Zegaoui, Abdallah; Boutoubat, Mohamed; Allouache, Hadj; Aillerie, Michel; Charles, Jean-Pierre

2018-05-01

The objective of this paper is to apply the Design of Experiments (DoE) method to study and to obtain a predictive model of any marketed monocrystalline photovoltaic (mc-PV) module. This technique allows us to have a mathematical model that represents the predicted responses depending upon input factors and experimental data. Therefore, the DoE model for characterization and modeling of mc-PV module behavior can be obtained by just performing a set of experimental trials. The DoE model of the mc-PV panel evaluates the predictive maximum power, as a function of irradiation and temperature in a bounded domain of study for inputs. For the mc-PV panel, the predictive model for both one level and two levels were developed taking into account both influences of the main effect and the interactive effects on the considered factors. The DoE method is then implemented by developing a code under Matlab software. The code allows us to simulate, characterize, and validate the predictive model of the mc-PV panel. The calculated results were compared to the experimental data, errors were estimated, and an accurate validation of the predictive models was evaluated by the surface response. Finally, we conclude that the predictive models reproduce the experimental trials and are defined within a good accuracy.

Missile Aerodynamics: Conference Proceedings of Symposium of the Fluid Dynamics Panel Held in Friedrichshafen, Germany on 23-26 April 1990

DTIC Science & Technology

1990-10-01

closely to the four groups of launch Mach numbers used two independent planar motions. The addition of con- in the range firings. A representative...the geometrical configuration. In a recent past, the AGARD Working Group 08 made a rather thorough review of afterbody flow studies by examining both...NUMBER OF COLOR PAGES WHICH DO NOT REPRODUCE LEGIBLY ON BLACK AND WHITE MICROFICHE. AGARD-CP-493 NORTH ATLANTIC TREATY ORGANIZATION ADVISORY GROUP FOR

Medical expenditure and unmet need of the pre-elderly and the elderly according to job status in Korea: Are the elderly indeed most vulnerable?

PubMed Central

Lee, Hwa-Young; Kondo, Naoki

2018-01-01

Increase in the elderly population and early retirement imposes immense economic burden on societies. Previous studies on the association between medical expenditure and working status in the elderly population have not adequately addressed reverse causality problem. In addition, the pre-elderly group has hardly been discussed in this regard. This study assessed possible causal association between employment status and medical expenditure as well as employment status and medical unmet needs in a representative sample of the Korean elderly (aged≧65) and the pre-elderly (aged ≧50 and < 65) adults from the Korea Health Panel Data (KHP). Dynamic panel Generalized Method of Moments (GMM) estimation was employed for the analysis of medical expenditure to address reverse causality, and fixed effect panel logistic regression was used for the analysis of unmet need. The results showed no significant association between job status and medical expenditure in the elderly, but a negative and significant influence on the level of medical expenditure in the pre-elderly. Unemployment was a significant determinant of lowering unmet need from lack of time while it was not associated with unmet need from financial burden in the fixed-effect panel model for both the elderly and pre-elderly groups. The pre-elderly adults were more likely to reduce necessary health service utilization due to unemployment compared to the elderly group because there is no proper financial safety net for the pre-elderly, which may cause non-adherence to treatment and therefore lead to negative health effects. The policy dialogue on safety net currently centers only on the elderly, but should be extended to the pre-elderly population. PMID:29570736

NIH state-of-the-science conference statement: Enhancing use and quality of colorectal cancer screening.

PubMed

Steinwachs, Donald; Allen, Jennifer Dacey; Barlow, William Eric; Duncan, R Paul; Egede, Leonard E; Friedman, Lawrence S; Keating, Nancy L; Kim, Paula; Lave, Judith R; LaVeist, Thomas A; Ness, Roberta B; Optican, Robert J; Virnig, Beth A

2010-02-04

To provide health care providers, patients, and the general public with a responsible assessment of currently available data on enhancing use and quality of colorectal cancer screening. A non-DHHS, nonadvocate 13-member panel representing the fields of cancer surveillance, health services research, community-based research, informed decision-making, access to care, health care policy, health communication, health economics, health disparities, epidemiology, statistics, thoracic radiology, internal medicine, gastroenterology, public health, end-of-life care, and a public representative. In addition, 20 experts from pertinent fields presented data to the panel and conference audience. Presentations by experts and a systematic review of the literature prepared by the RTI International-University of North Carolina Evidence-based Practice Center, through the Agency for Healthcare Research and Quality. Scientific evidence was given precedence over anecdotal experience. The panel drafted its statement based on scientific evidence presented in open forum and on published scientific literature. The draft statement was presented on the final day of the conference and circulated to the audience for comment. The panel released a revised statement later that day at http://consensus.nih.gov. This statement is an independent report of the panel and is not a policy statement of the NIH or the Federal Government. The panel found that despite substantial progress toward higher colorectal cancer screening rates nationally, screening rates fall short of desirable levels. Targeted initiatives to improve screening rates and reduce disparities in underscreened communities and population subgroups could further reduce colorectal cancer morbidity and mortality. This could be achieved by utilizing the full range of screening options and evidence-based interventions for increasing screening rates. With additional investments in quality monitoring, Americans could be assured that all screening achieves high rates of cancer prevention and early detection. To close the gap in screening, this report identifies the following priority areas for implementation and research to enhance the use and quality of colorectal cancer screening: • Eliminate financial barriers to colorectal cancer screening and appropriate follow up. • Widely implement interventions that have proven effective at increasing colorectal cancer screening, including patient reminder systems and one-on-one interactions with providers, educators, or navigators. • Conduct research to assess the effectiveness of tailoring programs to match the characteristics and preferences of target population groups to increase colorectal cancer screening. • Implement systems to ensure appropriate follow-up of positive colorectal cancer screening results. • Develop systems to assure high quality of colorectal cancer screening programs. • Conduct studies to determine the comparative effectiveness of the various colorectal cancer screening methods in usual practice settings.

Subtyping of Canadian isolates of Salmonella Enteritidis using Multiple Locus Variable Number Tandem Repeat Analysis (MLVA) alone and in combination with Pulsed-Field Gel Electrophoresis (PFGE) and phage typing.

PubMed

Ziebell, Kim; Chui, Linda; King, Robin; Johnson, Suzanne; Boerlin, Patrick; Johnson, Roger P

2017-08-01

Salmonella enterica subspecies enterica serovar Enteritidis (SE) is one of the most common causes of human salmonellosis and in Canada currently accounts for over 40% of human cases. Reliable subtyping of isolates is required for outbreak detection and source attribution. However, Pulsed-Field Gel Electrophoresis (PFGE), the current standard subtyping method for Salmonella spp., is compromised by the high genetic homogeneity of SE. Multiple Locus Variable Number Tandem Repeat Analysis (MLVA) was introduced to supplement PFGE, although there is a lack of data on the ability of MLVA to subtype Canadian isolates of SE. Three subtyping methods, PFGE, MLVA and phage typing were compared for their discriminatory power when applied to three panels of Canadian SE isolates: Panel 1: 70 isolates representing the diversity of phage types (PTs) and PFGE subtypes within these PTs; Panel 2: 214 apparently unrelated SE isolates of the most common PTs; and Panel 3: 27 isolates from 10 groups of epidemiologically related strains. For Panel 2 isolates, four MLVA subtypes were shared among 74% of unrelated isolates and in Panel 3 isolates, one MLVA subtype accounted for 62% of the isolates. For all panels, combining results from PFGE, MLVA and PT gave the best discrimination, except in Panel 1, where the combination of PT and PFGE was equally as high, due to the selection criteria for this panel. However, none of these methods is sufficiently discriminatory alone for reliable outbreak detection or source attribution, and must be applied together to achieve sufficient discrimination for practical purposes. Even then, some large clusters were not differentiated adequately. More discriminatory methods are required for reliable subtyping of this genetically highly homogeneous serovar. This need will likely be met by whole genome sequence analysis given the recent promising reports and as more laboratories implement this tool for outbreak response and surveillance. Copyright © 2017 Elsevier B.V. All rights reserved.

F-16XL Ship #2 wing glove close-up, laser cut holes, with dime for scale

NASA Technical Reports Server (NTRS)

1995-01-01

This June 1995 photograph of a test panel similiar to the one attached to the surface of an F-16XL research aircraft's left wing at NASA's Dryden Flight Research Center, Edwards, California, shows the size of the more than 10 million laser-cut holes in the panel, called a glove, as compared with a dime. Below the titanium panel into which holes are cut is a suction system linked to a compressor. During research flights with the modified, delta-winged F-16XL, the suction system pulled a small part of the boundary layer of air through the glove's porous surface to expand the extent of smooth (laminar) flow. Researchers believe that laminar flow conditions can reduce aerodynamic drag (friction) and contribute to reduced operating costs by improving fuel consumption and lowering aircraft weight. This Supersonic Laminar Flow Control (SLFC) experiment represents a collaborative effort between NASA and aerospace industry (specifically Boeing, Rockwell, and McDonnell Douglas), with Boeing assembling the panel and McDonnell Douglas designing the suction system.

An improved panel method for the solution of three-dimensional leading-edge vortex flows. Volume 1: Theory document

NASA Technical Reports Server (NTRS)

Johnson, F. T.; Lu, P.; Tinoco, E. N.

1980-01-01

An improved panel method for the solution of three dimensional flow and wing and wing-body combinations with leading edge vortex separation is presented. The method employs a three dimensional inviscid flow model in which the configuration, the rolled-up vortex sheets, and the wake are represented by quadratic doublet distributions. The strength of the singularity distribution as well as shape and position of the vortex spirals are computed in an iterative fashion starting with an assumed initial sheet geometry. The method calculates forces and moments as well as detail surface pressure distributions. Improvements include the implementation of improved panel numerics for the purpose of elimination the highly nonlinear effects of ring vortices around double panel edges, and the development of a least squares procedure for damping vortex sheet geometry update instabilities. A complete description of the method is included. A variety of cases generated by the computer program implementing the method are presented which verify the mathematical assumptions of the method and which compare computed results with experimental data to verify the underlying physical assumptions made by the method.

Flight service evaluation of composite helicopter components

NASA Technical Reports Server (NTRS)

Mardoian, George H.; Ezzo, Maureen B.

1990-01-01

An assessment is presented of ten composite tail rotor spars and four horizontal stabilizers exposed to the effects of in-flight commercial service for up to nine years to establish realistic environmental factors for use in future designs. This evaluation is supported by test results of helicopter components and panels which have been exposed to outdoor environmental effects since 1979. Full scale static and fatigue tests were conducted on graphite/epoxy and Kevlar/epoxy composite components removed from Sikorsky Model S-76 helicopters in commercial operations off the Gulf Coast of Louisiana. Small scale static and fatigue tests were conducted on coupons obtained from panels exposed to outdoor conditions in Stratford, CT and West Palm Beach, Florida. The panel materials and ply configurations were representative of the S-76 components. The results are discussed of moisture analyses and strength tests on both the S-76 components and composite panels after up to nine years of outdoor exposure. Full scale tests performed on the helicopter components did not disclose any significant reductions from the baseline strengths. The results increased confidence in the long term durability of advanced composite materials in helicopter structural applications.

Resource allocation in NHS dentistry: recognition of societal preferences (RAINDROP): study protocol.

PubMed

Vernazza, Christopher R; Carr, Katherine; Wildman, John; Gray, Joanne; Holmes, Richard D; Exley, Catherine; Smith, Robert A; Donaldson, Cam

2018-06-22

Resources in any healthcare systems are scarce relative to need and therefore choices need to be made which often involve difficult decisions about the best allocation of these resources. One pragmatic and robust tool to aid resource allocation is Programme Budgeting and Marginal Analysis (PBMA), but there is mixed evidence on its uptake and effectiveness. Furthermore, there is also no evidence on the incorporation of the preferences of a large and representative sample of the general public into such a process. The study therefore aims to undertake, evaluate and refine a PBMA process within the exemplar of NHS dentistry in England whilst also using an established methodology (Willingness to Pay (WTP)) to systematically gather views from a representative sample of the public. Stakeholders including service buyers (commissioners), dentists, dental public health representatives and patient representatives will be recruited to participate in a PBMA process involving defining current spend, agreeing criteria to judge services/interventions, defining areas for investment and disinvestment, rating these areas against the criteria and making final recommendations. The process will be refined based on participatory action research principles and evaluated through semi-structured interviews, focus groups and observation of the process by the research team. In parallel a representative sample of English adults will be recruited to complete a series of four surveys including WTP valuations of programmes being considered by the PBMA panel. In addition a methodological experiment comparing two ways of eliciting WTP will be undertaken. The project will allow the PBMA process and particularly the use of WTP within it to be investigated and developed. There will be challenges around engagement with the task by the panel undertaking it and with the outputs by stakeholders but careful relationship building will help to mitigate this. The large volume of data will be managed through careful segmenting of the analysis and the use of the well-established Framework approach to qualitative data analysis. WTP has various potential biases but the elicitation will be carefully designed to minimise these and some methodological investigation will take place.

The perspective of European researchers of national occupational safety and health institutes for contributing to a European research agenda: a modified Delphi study

PubMed Central

Gagliardi, Diana; Rondinone, Bruna M; Mirabile, Marco; Buresti, Giuliana; Ellwood, Peter; Hery, Michel; Paszkiewicz, Peter; Valenti, Antonio; Iavicoli, Sergio

2017-01-01

Objectives This study, developed within the frame of the Partnership for European Research on Occupational Safety and Health joint research activities and based on the frame designed by the 2013 European Agency for Safety and Health at Work (EU-OSHA) study, is the first example of using the points of view of European occupational safety and health (OSH) researchers. The objective is to identify priorities for OSH research that may contribute to the achievement of present and future sustainable growth objectives set by the European strategies. Methods The study was carried out using a modified Delphi method with a two-round survey. Each round involved a panel of about 110 researchers representing the network member institutes was selected according to specific criteria, including the ownership of research expertise in at least one of the four macroareas identified by the reference report developed by EU-OSHA in 2013. Results The study identified some innovative research topics (for example, ‘Emerging technological devices’ and ‘OSH consequences of markets integration’) and research priorities (ie, crowdsourcing, e-work, zero-hours contracts) that are not reflected in previous studies of this nature. The absence of any reference to violence and harassment at work among the researchers’ proposals is a major difference from previous similar studies, while topics related to gender issues and electromagnetic fields show a lower importance. Conclusions The innovative design of a research priorities identification process, which takes advantage of a large, representative and qualified panel of European researchers allowed the definition of a number of research priorities able to support the inclusion of innovative OSH research issues in the scope of the next European research agenda. PMID:28645965

Paternal Absence and Fathers' Roles. Hearing before the Select Committee on Children, Youth, and Families. House of Representatives, Ninety-Eighth Congress, First Session. November 10, 1983.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Select Committee on Children, Youth, and Families.

Subsequent to a related hearing surveying the economics of family life, the Select Committee on Children, Youth, and Families of the House of Representatives met to hear statements addressing the topics of paternal absence and the role of fathers in society. The first panel presented an overview of paternal absence and father involvement.…

HMO's and Medicare: Problems in the Oversight of a Promising Partnership. Hearing before the Subcommittee on Health and Long-Term Care of the Select Committee on Aging. House of Representatives, Ninety-Ninth Congress, First Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Select Committee on Aging.

This document contains witness testimonies and prepared statements from the Congressional hearing called to examine problems in the partnership of Medicare and Health Maintenance Organizations (HMO's). Opening statements are included from committee chairman Claude Pepper and from Representative Lawrence J. Smith. Two panels of witnesses address…

Impact-damaged graphite-thermoplastic trapezoidal-corrugation sandwich and semi-sandwich panels

NASA Technical Reports Server (NTRS)

Jegley, D.

1993-01-01

The results of a study of the effects of impact damage on compression-loaded trapezoidal-corrugation sandwich and semi-sandwich graphite-thermoplastic panels are presented. Sandwich panels with two identical face sheets and a trapezoidal corrugated core between them, and semi-sandwich panels with a corrugation attached to a single skin are considered in this study. Panels were designed, fabricated and tested. The panels were made using the manufacturing process of thermoforming, a less-commonly used technique for fabricating composite parts. Experimental results for unimpacted control panels and panels subjected to impact damage prior to loading are presented. Little work can be found in the literature about these configurations of thermoformed panels.

Hypervelocity Impact Performance of Open Cell Foam Core Sandwich Panel Structures

NASA Technical Reports Server (NTRS)

Ryan, Shannon; Christiansen, Eric; Lear, Dana

2009-01-01

Metallic foams are a relatively new class of materials with low density and novel physical, mechanical, thermal, electrical and acoustic properties. Although incompletely characterized, they offer comparable mechanical performance to traditional spacecraft structural materials (i.e. honeycomb sandwich panels) without detrimental through-thickness channeling cells. There are two competing types of metallic foams: open cell and closed cell. Open cell foams are considered the more promising technology due to their lower weight and higher degree of homogeneity. Leading micrometeoroid and orbital debris shields (MMOD) incorporate thin plates separated by a void space (i.e. Whipple shield). Inclusion of intermediate fabric layers, or multiple bumper plates have led to significant performance enhancements, yet these shields require additional non-ballistic mass for installation (fasteners, supports, etc.) that can consume up to 35% of the total shield weight [1]. Structural panels, such as open cell foam core sandwich panels, that are also capable of providing sufficient MMOD protection, represent a significant potential for increased efficiency in hypervelocity impact shielding from a systems perspective through a reduction in required non-ballistic mass. In this paper, the results of an extensive impact test program on aluminum foam core sandwich panels are reported. The effect of pore density, and core thickness on shielding performance have been evaluated over impact velocities ranging from 2.2 - 9.3 km/s at various angles. A number of additional tests on alternate sandwich panel configurations of comparable-weight have also been performed, including aluminum honeycomb sandwich panels (see Figure 1), Nomex honeycomb core sandwich panels, and 3D aluminum honeycomb sandwich panels. A total of 70 hypervelocity impact tests are reported, from which an empirical ballistic limit equation (BLE) has been derived. The BLE is in the standard form suitable for implementation in risk analysis software, and includes the effect of panel thickness, core density, and facesheet material properties. A comparison between the shielding performance of foam core sandwich panel structures and common MMOD shielding configurations is made for both conservative (additional 35% non-ballistic mass) and optimistic (additional mass equal to 30% of bumper mass) considerations. Suggestions to improve the shielding performance of foam core sandwich panels are made, including the use of outer mesh layers, intermediate fabric/composite layers, and varying pore density.

Performance comparison of flat static and adjustable angle solar panels for sunny weather

NASA Astrophysics Data System (ADS)

Chua, Yaw Long; Yong, Yoon Kuang

2017-04-01

Nowadays solar panels are commonly used to collect sunlight so that it could convert solar energy into electrical energy. The power generated by the solar panels depends on the amount of sunlight collected on the solar panels. This paper presents a study that was carried out to study how changing the angle of the solar panels will impact the amount of electrical energy collected after conversion and the efficiencies of the solar panels. In this paper, the solar panels were placed at 30°, 35° and 40° angles throughout different days. The energy collected is then compared with energy collected by a flat static solar panel. It turns out that the solar panels with 40° angle performed best among the other angle solar panels.

Structural Testing of a Stitched/Resin Film Infused Graphite-Epoxy Wing Box

NASA Technical Reports Server (NTRS)

Jegley, Dawn C.; Bush, Harold G.

2001-01-01

The results of a series of tests conducted at the NASA Langley Research Center to evaluate the behavior of an all-composite full-scale wing box are presented. The wing box is representative of a section of a 220-passenger commercial transport aircraft wing box and was designed and constructed by The Boeing Company as part of the NASA Advanced Subsonics Technology (AST) program. The semi-span wing was fabricated from a graphite-epoxy material system with cover panels and spars held together using Kevlar stitches through the thickness. No mechanical fasteners were used to hold the stiffeners to the skin of the cover panels. Tests were conducted with and without low-speed impact damage, discrete source damage and repairs. Up-bending, down-bending and brake roll loading conditions were applied. The structure with non-visible impact damage carried 97% of Design Ultimate Load prior to failure through a lower cover panel access hole.

User's manual: Subsonic/supersonic advanced panel pilot code

NASA Technical Reports Server (NTRS)

Moran, J.; Tinoco, E. N.; Johnson, F. T.

1978-01-01

Sufficient instructions for running the subsonic/supersonic advanced panel pilot code were developed. This software was developed as a vehicle for numerical experimentation and it should not be construed to represent a finished production program. The pilot code is based on a higher order panel method using linearly varying source and quadratically varying doublet distributions for computing both linearized supersonic and subsonic flow over arbitrary wings and bodies. This user's manual contains complete input and output descriptions. A brief description of the method is given as well as practical instructions for proper configurations modeling. Computed results are also included to demonstrate some of the capabilities of the pilot code. The computer program is written in FORTRAN IV for the SCOPE 3.4.4 operations system of the Ames CDC 7600 computer. The program uses overlay structure and thirteen disk files, and it requires approximately 132000 (Octal) central memory words.

Structural Response and Failure of a Full-Scale Stitched Graphite-Epoxy Wing

NASA Technical Reports Server (NTRS)

Jegley, Dawn C.; Lovejoy, Andrew E.; Bush, Harold G.

2001-01-01

Analytical and experimental results of the test for an all-composite full-scale wing box are presented. The wing box is representative of a section of a 220-passenger commercial transport aircraft wing box and was designed and constructed by The Boeing Company as part of the NASA Advanced Subsonics Technology (AST) program. The semi-span wing was fabricated from a graphite-epoxy material system with cover panels and spars held together using Kevlar stitches through the thickness. No mechanical fasteners were used to hold the stiffeners to the skin of the cover panels. Tests were conducted with and without low-speed impact damage, discrete source damage and repairs. Up-bending down-bending and brake roll loading conditions were applied. The structure with nonvisible impact damage carried 97% of Design Ultimate Load prior to failure through a lower cover panel access hole. Finite element and experimental results agree for the global response of the structure.

Decentralized control of sound radiation using iterative loop recovery.

PubMed

Schiller, Noah H; Cabell, Randolph H; Fuller, Chris R

2010-10-01

A decentralized model-based control strategy is designed to reduce low-frequency sound radiation from periodically stiffened panels. While decentralized control systems tend to be scalable, performance can be limited due to modeling error introduced by the unmodeled interaction between neighboring control units. Since bounds on modeling error are not known in advance, it is difficult to ensure the decentralized control system will be robust without making the controller overly conservative. Therefore an iterative approach is suggested, which utilizes frequency-shaped loop recovery. The approach accounts for modeling error introduced by neighboring control loops, requires no communication between subsystems, and is relatively simple. The control strategy is evaluated numerically using a model of a stiffened aluminum panel that is representative of the sidewall of an aircraft. Simulations demonstrate that the iterative approach can achieve significant reductions in radiated sound power from the stiffened panel without destabilizing neighboring control units.

Evaluation of the Structural Response and Failure of a Full-Scale Stitched Graphite-Epoxy Wing

NASA Astrophysics Data System (ADS)

Jegley, Dawn C.; Bush, Harold G.; Lovejoy, Andrew E.

2001-01-01

Analytical and experimental results for an all-composite full-scale wing box are presented. The wing box is representative of a section of a 220-passenger commercial transport aircraft wing box and was designed and constructed by The Boeing Company as part of the NASA Advanced Subsonics Technology (AST) program. The semi-span wing was fabricated from a graphite-epoxy material system with cover panels and spars held together using Kevlar stitches through the thickness. No mechanical fasteners were used to hold the stiffeners to the skin of the cover panels. Tests were conducted with and without low-speed impact damage, discrete source damage and repairs. Upbending, down-bending and brake roll loading conditions were applied. The structure with nonvisible impact damage carried 97% of Design Ultimate Load prior to failure through a lower cover panel access hole. Finite element and experimental results agree for the global response of the structure.

Decentralized Control of Sound Radiation Using Iterative Loop Recovery

NASA Technical Reports Server (NTRS)

Schiller, Noah H.; Cabell, Randolph H.; Fuller, Chris R.

2009-01-01

A decentralized model-based control strategy is designed to reduce low-frequency sound radiation from periodically stiffened panels. While decentralized control systems tend to be scalable, performance can be limited due to modeling error introduced by the unmodeled interaction between neighboring control units. Since bounds on modeling error are not known in advance, it is difficult to ensure the decentralized control system will be robust without making the controller overly conservative. Therefore an iterative approach is suggested, which utilizes frequency-shaped loop recovery. The approach accounts for modeling error introduced by neighboring control loops, requires no communication between subsystems, and is relatively simple. The control strategy is evaluated numerically using a model of a stiffened aluminum panel that is representative of the sidewall of an aircraft. Simulations demonstrate that the iterative approach can achieve significant reductions in radiated sound power from the stiffened panel without destabilizing neighboring control units.

New chairman takes helm at Climate Change Panel

NASA Astrophysics Data System (ADS)

Showstack, Randy

An Indian industrial engineer and economist who supports the Kyoto Protocol, and who has sharply criticized the administration of George W. Bush on the climate change issue for not doing enough to curb greenhouse gas emissions, won the first-ever contested election for chairman of the Intergovernmental Panel on Climate Change (IPCC) during a meeting on 19 April.Rajendra Pachauri is the first representative from a developing country to chair the IPCC, a panel of about 2,500 experts on a wide range of areas related to climate change. The IPCC was established in 1988 by the World Meteorological Organization and the United Nations Environment Programme. In total, the IPCC currently includes 192 member states. Although the bulk of the IPCC's work is conducted by three technical working groups, the chairman plays a key role in facilitating the overall process of the IPCC, organizing the scientific debate within the IPCC, and serving as chief spokesman.

Centers for Disease Control and Prevention Expert Panel Meetings on Prevention and Treatment of Anthrax in Adults

PubMed Central

Hendricks, Katherine A.; Wright, Mary E.; Shadomy, Sean V.; Bradley, John S.; Morrow, Meredith G.; Pavia, Andy T.; Rubinstein, Ethan; Holty, Jon-Erik C.; Messonnier, Nancy E.; Smith, Theresa L.; Pesik, Nicki; Treadwell, Tracee A.

2014-01-01

The Centers for Disease Control and Prevention convened panels of anthrax experts to review and update guidelines for anthrax postexposure prophylaxis and treatment. The panels included civilian and military anthrax experts and clinicians with experience treating anthrax patients. Specialties represented included internal medicine, pediatrics, obstetrics, infectious disease, emergency medicine, critical care, pulmonology, hematology, and nephrology. Panelists discussed recent patients with systemic anthrax; reviews of published, unpublished, and proprietary data regarding antimicrobial drugs and anthrax antitoxins; and critical care measures of potential benefit to patients with anthrax. This article updates antimicrobial postexposure prophylaxis and antimicrobial and antitoxin treatment options and describes potentially beneficial critical care measures for persons with anthrax, including clinical procedures for infected nonpregnant adults. Changes from previous guidelines include an expanded discussion of critical care and clinical procedures and additional antimicrobial choices, including preferred antimicrobial drug treatment for possible anthrax meningitis. PMID:24447897

Centers for disease control and prevention expert panel meetings on prevention and treatment of anthrax in adults.

PubMed

Hendricks, Katherine A; Wright, Mary E; Shadomy, Sean V; Bradley, John S; Morrow, Meredith G; Pavia, Andy T; Rubinstein, Ethan; Holty, Jon-Erik C; Messonnier, Nancy E; Smith, Theresa L; Pesik, Nicki; Treadwell, Tracee A; Bower, William A

2014-02-01

The Centers for Disease Control and Prevention convened panels of anthrax experts to review and update guidelines for anthrax postexposure prophylaxis and treatment. The panels included civilian and military anthrax experts and clinicians with experience treating anthrax patients. Specialties represented included internal medicine, pediatrics, obstetrics, infectious disease, emergency medicine, critical care, pulmonology, hematology, and nephrology. Panelists discussed recent patients with systemic anthrax; reviews of published, unpublished, and proprietary data regarding antimicrobial drugs and anthrax antitoxins; and critical care measures of potential benefit to patients with anthrax. This article updates antimicrobial postexposure prophylaxis and antimicrobial and antitoxin treatment options and describes potentially beneficial critical care measures for persons with anthrax, including clinical procedures for infected nonpregnant adults. Changes from previous guidelines include an expanded discussion of critical care and clinical procedures and additional antimicrobial choices, including preferred antimicrobial drug treatment for possible anthrax meningitis.

Low-Velocity Impact Response of Sandwich Beams with Functionally Graded Core

NASA Technical Reports Server (NTRS)

Apetre, N. A.; Sankar, B. V.; Ambur, D. R.

2006-01-01

The problem of low-speed impact of a one-dimensional sandwich panel by a rigid cylindrical projectile is considered. The core of the sandwich panel is functionally graded such that the density, and hence its stiffness, vary through the thickness. The problem is a combination of static contact problem and dynamic response of the sandwich panel obtained via a simple nonlinear spring-mass model (quasi-static approximation). The variation of core Young's modulus is represented by a polynomial in the thickness coordinate, but the Poisson's ratio is kept constant. The two-dimensional elasticity equations for the plane sandwich structure are solved using a combination of Fourier series and Galerkin method. The contact problem is solved using the assumed contact stress distribution method. For the impact problem we used a simple dynamic model based on quasi-static behavior of the panel - the sandwich beam was modeled as a combination of two springs, a linear spring to account for the global deflection and a nonlinear spring to represent the local indentation effects. Results indicate that the contact stiffness of thc beam with graded core Increases causing the contact stresses and other stress components in the vicinity of contact to increase. However, the values of maximum strains corresponding to the maximum impact load arc reduced considerably due to grading of thc core properties. For a better comparison, the thickness of the functionally graded cores was chosen such that the flexural stiffness was equal to that of a beam with homogeneous core. The results indicate that functionally graded cores can be used effectively to mitigate or completely prevent impact damage in sandwich composites.

Newly designed 11-gene panel reveals first case of hereditary amyloidosis captured by massive parallel sequencing.

PubMed

Chyra Kufova, Zuzana; Sevcikova, Tereza; Januska, Jaroslav; Vojta, Petr; Boday, Arpad; Vanickova, Pavla; Filipova, Jana; Growkova, Katerina; Jelinek, Tomas; Hajduch, Marian; Hajek, Roman

2018-02-17

Amyloidosis is caused by deposition of abnormal protein fibrils, leading to damage of organ function. Hereditary amyloidosis represents a monogenic disease caused by germline mutations in 11 amyloidogenic precursor protein genes. One of the important but non-specific symptoms of amyloidosis is hypertrophic cardiomyopathy. Diagnostics of hereditary amyloidosis is complicated and the real cause can remain overlooked. We aimed to design hereditary amyloidosis gene panel and to introduce new next-generation sequencing (NGS) approach to investigate hereditary amyloidosis in a cohort of patients with hypertrophic cardiomyopathy of unknown significance. Design of target enrichment DNA library preparation using Haloplex Custom Kit containing 11 amyloidogenic genes was followed by MiSeq Illumina sequencing and bioinformatics identification of germline variants using tool VarScan in a cohort of 40 patients. We present design of NGS panel for 11 genes ( TTR , FGA , APOA1 , APOA2 , LYZ , GSN , CST3 , PRNP , APP , B2M , ITM2B ) connected to various forms of amyloidosis. We detected one mutation, which is responsible for hereditary amyloidosis. Some other single nucleotide variants are so far undescribed or rare variants or represent common polymorphisms in European population. We report one positive case of hereditary amyloidosis in a cohort of patients with hypertrophic cardiomyopathy of unknown significance and set up first panel for NGS in hereditary amyloidosis. This work may facilitate successful implementation of the NGS method by other researchers or clinicians and may improve the diagnostic process after validation. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Rethinking Approaches to Strategic Stability in the 21st Century

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rose, Brian

Lawrence Livermore National Laboratory (LLNL) hosted a two-day conference on rethinking approaches to strategic stability in the 21st century on October 20-21, 2016 in Livermore, CA. The conference was jointly convened by Lawrence Livermore, Los Alamos, and Sandia National Laboratories, and was held in partnership with the United States Department of State’s Bureau of Arms Control, Verification and Compliance. The conference took place at LLNL’s Center for Global Security Research (CGSR) and included a range of representatives from U.S. government, academic, and private institutions, as well as representatives from U.S. allies in Europe and Asia.The following summary covers topics andmore » discussions from each of the panels. It is not intended to capture every point in detail, but seeks to outline the range of views on these complex and inter-related issues while providing a general overview of the panel topics and discussions that took place. The conference was held under the Chatham House rule and does not attribute any remarks to any specific individual or institution. The views reflected in this report do not represent the United States Government, Department of State, or the national laboratories.« less

Coastal zone management

NASA Technical Reports Server (NTRS)

Tilton, E. L., III

1975-01-01

A panel of federal and state representatives concerned with coastal zone affairs discussed their problems in this area. In addition, several demonstrations of the application of remote sensing technology to coastal zone management were described. These demonstrations were performed by several agencies in a variety of geographical areas.

Essays on Career Education.

ERIC Educational Resources Information Center

McClure, Larry, Ed.; Buan, Carolyn, Ed.

This volume contains reactions to the career education concept as proposed by the U.S. Office of Education from a panel of 23 educators, practitioners, businessmen, and students representing such disciplines as anthropology, law, political science, sociology, mathematics, vocational education, psychology, philosophy, and counseling. The Foreword…

Lu & Malenchenko work on storage batteries in Zvezda taken during STS-106

NASA Image and Video Library

2000-09-13

STS106-388-011 (8-20 September 2000) --- Cosmonaut Yuri I. Malenchenko (top), and astronaut Edward T. Lu, both mission specialists, work inside panels in the Zvezda Service Module on the International Space Station (ISS). Malenchenko represents Rosaviakosmos.

Investigation of Chinese text entry performance for mobile display interfaces.

PubMed

Lin, Po-Hung

2015-01-01

This study examined the effects of panel type, frequency of use and arrangement of phonetic symbols on operation time, usability, visual fatigue and workload in text entry performance. Three types of panel (solid, touch and mixed), three types of frequency of use (low, medium and high) and two types of the arrangement of phonetic symbols (vertical and horizontal) were investigated through 30 college students in the experiment. The results indicated that panel type, frequency of use, arrangement of phonetic symbols and the interaction between panel type and frequency of use were significant factors on operation time. Panel type was also a significant factor on usability, and a touch panel and a solid panel showed better usability than a mixed panel. Furthermore, a touch panel showed good usability and the lowest workload and therefore it is recommended to use a touch panel with vertical phonetic arrangement in sending Chinese text messages. Practitioner Summary: This study found, from ergonomics considerations, that a touch panel showed good usability and it is recommended to use a touch panel with vertical phonetic arrangement in sending Chinese text messages. Mobile display manufacturers can use the results of this study as a reference for future keyboard design.

Citizens' perspectives on personalized medicine: a qualitative public deliberation study

PubMed Central

Bombard, Yvonne; Abelson, Julia; Simeonov, Dorina; Gauvin, Francois-Pierre

2013-01-01

Our objective was to explore citizens' informed and reasoned values and expectations of personalized medicine, a timely yet novel genomics policy issue. A qualitative, public deliberation study was undertaken using a citizens' reference panel on health technologies, established to provide input to the health technology assessment process in Ontario, Canada. The citizens' panel consisted of five women and nine men, aged 18–71 years, with one member selected from each health authority region. There were shared expectations among the citizens' panel members for the potential of personalized medicine technologies to improve care, provided they are deemed clinically valid and effective. These expectations were tempered by concerns about value for money and the possibility that access to treatment may be limited by personalized medicine tests used to stratify patients. Although they questioned the presumed technological imperative presented by personalized medicine technologies, they called for increased efforts to prepare the health-care system to effectively integrate these technologies. This study represents an early but important effort to explore public values toward personalized medicine. This study also provides evidence of the public's ability to form coherent judgments about a new policy issue. Concerned that personalized tests might be used to ration care, they suggested that treatment should be made available if patients wanted it, irrespective of tests that indicate little benefit. This issue raises clinical and policy challenges that may undermine the value of personalized medicine. Further efforts to deliberate with the public are warranted to inform effective, efficient and equitable translation of personalized medicine. PMID:23340511

Multiple reaction monitoring assay based on conventional liquid chromatography and electrospray ionization for simultaneous monitoring of multiple cerebrospinal fluid biomarker candidates for Alzheimer's disease

PubMed Central

Choi1, Yong Seok; Lee, Kelvin H.

2016-01-01

Alzheimer's disease (AD) is the most common type of dementia, but early and accurate diagnosis remains challenging. Previously, a panel of cerebrospinal fluid (CSF) biomarker candidates distinguishing AD and non-AD CSF accurately (> 90%) was reported. Furthermore, a multiple reaction monitoring (MRM) assay based on nano liquid chromatography tandem mass spectrometry (nLC-MS/MS) was developed to help validate putative AD CSF biomarker candidates including proteins from the panel. Despite the good performance of the MRM assay, wide acceptance may be challenging because of limited availability of nLC-MS/MS systems laboratories. Thus, here, a new MRM assay based on conventional LC-MS/MS is presented. This method monitors 16 peptides representing 16 (of 23) biomarker candidates that belonged to the previous AD CSF panel. A 30-times more concentrated sample than the sample used for the previous study was loaded onto a high capacity trap column, and all 16 MRM transitions showed good linearity (average R2 = 0.966), intra-day reproducibility (average coefficient of variance (CV) = 4.78%), and inter-day reproducibility (average CV = 9.85%). The present method has several advantages such as a shorter analysis time, no possibility of target variability, and no need for an internal standard. PMID:26404792

Traditional methods v. new technologies - dilemmas for dietary assessment in large-scale nutrition surveys and studies: a report following an international panel discussion at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, 3 September 2015.

PubMed

Amoutzopoulos, B; Steer, T; Roberts, C; Cade, J E; Boushey, C J; Collins, C E; Trolle, E; de Boer, E J; Ziauddeen, N; van Rossum, C; Buurma, E; Coyle, D; Page, P

2018-01-01

The aim of the present paper is to summarise current and future applications of dietary assessment technologies in nutrition surveys in developed countries. It includes the discussion of key points and highlights of subsequent developments from a panel discussion to address strengths and weaknesses of traditional dietary assessment methods (food records, FFQ, 24 h recalls, diet history with interviewer-assisted data collection) v. new technology-based dietary assessment methods (web-based and mobile device applications). The panel discussion 'Traditional methods v. new technologies: dilemmas for dietary assessment in population surveys', was held at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, September 2015. Despite respondent and researcher burden, traditional methods have been most commonly used in nutrition surveys. However, dietary assessment technologies offer potential advantages including faster data processing and better data quality. This is a fast-moving field and there is evidence of increasing demand for the use of new technologies amongst the general public and researchers. There is a need for research and investment to support efforts being made to facilitate the inclusion of new technologies for rapid, accurate and representative data.

Multiple reaction monitoring assay based on conventional liquid chromatography and electrospray ionization for simultaneous monitoring of multiple cerebrospinal fluid biomarker candidates for Alzheimer's disease.

PubMed

Choi, Yong Seok; Lee, Kelvin H

2016-03-01

Alzheimer's disease (AD) is the most common type of dementia, but early and accurate diagnosis remains challenging. Previously, a panel of cerebrospinal fluid (CSF) biomarker candidates distinguishing AD and non-AD CSF accurately (>90 %) was reported. Furthermore, a multiple reaction monitoring (MRM) assay based on nano liquid chromatography tandem mass spectrometry (nLC-MS/MS) was developed to help validate putative AD CSF biomarker candidates including proteins from the panel. Despite the good performance of the MRM assay, wide acceptance may be challenging because of limited availability of nLC-MS/MS systems in laboratories. Thus, here, a new MRM assay based on conventional LC-MS/MS is presented. This method monitors 16 peptides representing 16 (of 23) biomarker candidates that belonged to the previous AD CSF panel. A 30-times more concentrated sample than the sample used for the previous study was loaded onto a high capacity trap column, and all 16 MRM transitions showed good linearity (average R(2) = 0.966), intra-day reproducibility (average coefficient of variance (CV) = 4.78 %), and inter-day reproducibility (average CV = 9.85 %). The present method has several advantages such as a shorter analysis time, no possibility of target variability, and no need for an internal standard.

A Comprehensive Panel of Three-Dimensional Models for Studies of Prostate Cancer Growth, Invasion and Drug Responses

PubMed Central

Härmä, Ville; Virtanen, Johannes; Mäkelä, Rami; Happonen, Antti; Mpindi, John-Patrick; Knuuttila, Matias; Kohonen, Pekka; Lötjönen, Jyrki; Kallioniemi, Olli; Nees, Matthias

2010-01-01

Prostate epithelial cells from both normal and cancer tissues, grown in three-dimensional (3D) culture as spheroids, represent promising in vitro models for the study of normal and cancer-relevant patterns of epithelial differentiation. We have developed the most comprehensive panel of miniaturized prostate cell culture models in 3D to date (n = 29), including many non-transformed and most currently available classic prostate cancer (PrCa) cell lines. The purpose of this study was to analyze morphogenetic properties of PrCa models in 3D, to compare phenotypes, gene expression and metabolism between 2D and 3D cultures, and to evaluate their relevance for pre-clinical drug discovery, disease modeling and basic research. Primary and non-transformed prostate epithelial cells, but also several PrCa lines, formed well-differentiated round spheroids. These showed strong cell-cell contacts, epithelial polarization, a hollow lumen and were covered by a complete basal lamina (BL). Most PrCa lines, however, formed large, poorly differentiated spheroids, or aggressively invading structures. In PC-3 and PC-3M cells, well-differentiated spheroids formed, which were then spontaneously transformed into highly invasive cells. These cell lines may have previously undergone an epithelial-to-mesenchymal transition (EMT), which is temporarily suppressed in favor of epithelial maturation by signals from the extracellular matrix (ECM). The induction of lipid and steroid metabolism, epigenetic reprogramming, and ECM remodeling represents a general adaptation to 3D culture, regardless of transformation and phenotype. In contrast, PI3-Kinase, AKT, STAT/interferon and integrin signaling pathways were particularly activated in invasive cells. Specific small molecule inhibitors targeted against PI3-Kinase blocked invasive cell growth more effectively in 3D than in 2D monolayer culture, or the growth of normal cells. Our panel of cell models, spanning a wide spectrum of phenotypic plasticity, supports the investigation of different modes of cell migration and tumor morphologies, and will be useful for predictive testing of anti-cancer and anti-metastatic compounds. PMID:20454659

PM2.5 AND HEART RATE VARIABILITY IN AN ELDERLY PANEL. (R826780)

EPA Science Inventory

The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

Can Cultural Worldviews Influence Network Composition?

ERIC Educational Resources Information Center

Vaisey, Stephen; Lizardo, Omar

2010-01-01

Most sociological research assumes that social network composition shapes individual beliefs. Network theory and research has not adequately considered that internalized cultural worldviews might affect network composition. Drawing on a synthetic, dual-process theory of culture and two waves of nationally-representative panel data, this article…

Krikalev with CPAs in Node 1/Unity CBA

NASA Image and Video Library

2005-06-21

ISS011-E-09392 (21 June 2005) --- Cosmonaut Sergei K. Krikalev, Expedition 11 commander representing Russia's Federal Space Agency, moves one of the two Control Panel Assemblies (CPA) from the Unity node’s Common Berthing Assembly (CBA) on the International Space Station (ISS).

KENNEDY SPACE CENTER, FLA. - NASA Vehicle Manager Scott Thurston (hands extended) talks to the media in the Orbiter Processing Facility. The media was invited to see the orbiter Atlantis as it is being prepared for Return to Flight. Both local and national reporters representing print and TV networks were able to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.

NASA Image and Video Library

2003-09-26

KENNEDY SPACE CENTER, FLA. - NASA Vehicle Manager Scott Thurston (hands extended) talks to the media in the Orbiter Processing Facility. The media was invited to see the orbiter Atlantis as it is being prepared for Return to Flight. Both local and national reporters representing print and TV networks were able to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.

KENNEDY SPACE CENTER, FLA. - NASA Vehicle Manager Scott Thurston (facing camera) talks to the media in the Orbiter Processing Facility. The media was invited to see the orbiter Atlantis as it is being prepared for Return to Flight. Both local and national reporters representing print and TV networks were able to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.

NASA Image and Video Library

2003-09-26

KENNEDY SPACE CENTER, FLA. - NASA Vehicle Manager Scott Thurston (facing camera) talks to the media in the Orbiter Processing Facility. The media was invited to see the orbiter Atlantis as it is being prepared for Return to Flight. Both local and national reporters representing print and TV networks were able to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.

KENNEDY SPACE CENTER, FLA. - NASA Vehicle Manager Scott Thurston (left) talks to a phalanx of media in the Orbiter Processing Facility. The media was invited to see the orbiter Atlantis as it is being prepared for Return to Flight. Both local and national reporters representing print and TV networks were able to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.

NASA Image and Video Library

2003-09-26

KENNEDY SPACE CENTER, FLA. - NASA Vehicle Manager Scott Thurston (left) talks to a phalanx of media in the Orbiter Processing Facility. The media was invited to see the orbiter Atlantis as it is being prepared for Return to Flight. Both local and national reporters representing print and TV networks were able to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.

KENNEDY SPACE CENTER, FLA. - NASA Vehicle Manager Scott Thurston (right) talks to the media in the Orbiter Processing Facility . The media was invited to see the orbiter Atlantis as it is being prepared for Return to Flight. Both local and national reporters representing print and TV networks were able to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.

NASA Image and Video Library

2003-09-26

KENNEDY SPACE CENTER, FLA. - NASA Vehicle Manager Scott Thurston (right) talks to the media in the Orbiter Processing Facility . The media was invited to see the orbiter Atlantis as it is being prepared for Return to Flight. Both local and national reporters representing print and TV networks were able to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.

KENNEDY SPACE CENTER, FLA. - The media gather around NASA Vehicle Manager Scott Thurston (white shirt, right) who talks about some of the work being done on the orbiter Atlantis as it is being prepared for Return to Flight in the Orbiter Processing Facility. Both local and national reporters representing print and TV networks were able to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.

NASA Image and Video Library

2003-09-26

KENNEDY SPACE CENTER, FLA. - The media gather around NASA Vehicle Manager Scott Thurston (white shirt, right) who talks about some of the work being done on the orbiter Atlantis as it is being prepared for Return to Flight in the Orbiter Processing Facility. Both local and national reporters representing print and TV networks were able to see work in progress on Atlantis, including the reinstallation of the Reinforced Carbon-Carbon panels on the orbiter’s wing leading edge; wiring inspections; and checks of the engines in the Orbital Maneuvering System.

Design and Fabrication of a Tank-Applied Broad Area Cooling Shield Coupon

NASA Technical Reports Server (NTRS)

Wood, J. J.; Middlemas, M. R.

2012-01-01

The small-scale broad area cooling (BAC) shield test panel represents a section of the cryogenic propellant storage and transfer ground test article, a flight-like cryogenic propellant storage tank. The test panel design includes an aluminum tank shell, primer, spray-on foam insulation, multilayer insulation (MLI), and BAC shield hardware. This assembly was sized to accurately represent the character of the MLI/BAC shield system, be quickly and inexpensively assembled, and be tested in the Marshall Space Flight Center Acoustic Test Facility. Investigating the BAC shield response to a worst-case launch dynamic load was the key purpose for developing the test article and performing the test. A preliminary method for structurally supporting the BAC shield using low-conductivity standoffs was designed, manufactured, and evaluated as part of the test. The BAC tube-standoff interface and unsupported BAC tube lengths were key parameters for evaluation. No noticeable damage to any system hardware element was observed after acoustic testing.

Analysis and design of lattice materials for large cord and curvature variations in skin panels of morphing wings

NASA Astrophysics Data System (ADS)

Vigliotti, Andrea; Pasini, Damiano

2015-03-01

In the past few decades, several concepts for morphing wings have been proposed with the aim of improving the structural and aerodynamic performance of conventional aircraft wings. One of the most interesting challenges in the design of a morphing wing is represented by the skin, which needs to meet specific deformation requirements. In particular when morphing involves changes of cord or curvature, the skin is required to undergo large recoverable deformation in the actuation direction, while maintaining the desired shape and strength in the others. One promising material concept that can meet these specifications is represented by lattice materials. This paper examines the use of alternative planar lattices in the embodiment of a skin panel for cord and camber morphing of an aircraft wing. We use a structural homogenization scheme capable of capturing large geometric nonlinearity, to examine the structural performance of lattice skin concepts, as well as to tune their mechanical properties in desired directions.

Patient-Provider Communication and Health Outcomes Among Individuals With Atherosclerotic Cardiovascular Disease in the United States: Medical Expenditure Panel Survey 2010 to 2013.

PubMed

Okunrintemi, Victor; Spatz, Erica S; Di Capua, Paul; Salami, Joseph A; Valero-Elizondo, Javier; Warraich, Haider; Virani, Salim S; Blaha, Michael J; Blankstein, Ron; Butt, Adeel A; Borden, William B; Dharmarajan, Kumar; Ting, Henry; Krumholz, Harlan M; Nasir, Khurram

2017-04-01

Consumer-reported patient-provider communication (PPC) assessed by Consumer Assessment of Health Plans Survey in ambulatory settings is incorporated as a complementary value metric for patient-centered care of chronic conditions in pay-for-performance programs. In this study, we examine the relationship of PPC with select indicators of patient-centered care in a nationally representative US adult population with established atherosclerotic cardiovascular disease. The study population consisted of a nationally representative sample of 6810 individuals (aged ≥18 years), representing 18.3 million adults with established atherosclerotic cardiovascular disease (self-reported or International Classification of Diseases, Ninth Edition diagnosis) reporting a usual source of care in the 2010 to 2013 pooled Medical Expenditure Panel Survey cohort. Participants responded to questions from Consumer Assessment of Health Plans Survey that assessed PPC, and we developed a weighted PPC composite score using their responses, categorized as 1 (poor), 2 (average), and 3 (optimal). Outcomes of interest were (1) patient-reported outcomes: 12-item Short Form physical/mental health status, (2) quality of care measures: statin and ASA use, (3) healthcare resource utilization: emergency room visits and hospital stays, and (4) total annual and out-of-pocket healthcare expenditures. Atherosclerotic cardiovascular disease patients reporting poor versus optimal were over 2-fold more likely to report poor outcomes; 52% and 26% more likely to report that they are not on statin and aspirin, respectively, had a significantly greater utilization of health resources (odds ratio≥2 emergency room visit, 1.41 [95% confidence interval, 1.09-1.81]; odds ratio≥2 hospitalization, 1.36 [95% confidence interval, 1.04-1.79]), as well as an estimated $1243 ($127-$2359) higher annual healthcare expenditure. This study reveals a strong relationship between PPC and patient-reported outcomes, utilization of evidence-based therapies, healthcare resource utilization, and expenditures among those with established atherosclerotic cardiovascular disease. © 2017 American Heart Association, Inc.

Color flat panel display for the Bradley Fighting Vehicle

NASA Astrophysics Data System (ADS)

Prince, J. Colin; Martin, A. J.

1996-05-01

The modernization program for the Bradley Fighting Vehicle, M2 A3, represents the first deployment of an active matrix liquid crystal display, AMLCD, in a military ground vehicle. In many respects the selection of AMLCD was determined according to the familiar metrics which have resulted in AMLCD being broadly selected for modern air vehicle installations. In fact, there is considerable similarities between the Bradley AMLCD and its recent forbearers in the avionic industry. In the Bradley, the AMLCD unit is referred to as a color flat panel display, CFPD and the features of this unit, as well as its environment and utilization are described in this paper.

Monitoring environmental hazards and public health

NASA Astrophysics Data System (ADS)

Showstack, Randy

Saying that no national system exists to monitor public health problems linked to environmental hazards, former U.S. Senator Lowell Weicker, Jr., announced on May 11 the launch of a Pew Charitable Trusts blue ribbon panel to focus on this issue.The panel, which includes representatives from academia and health care organizations, will focus on how the United States tracks diseases and recommend ways to fill data gaps; review what tools are needed to improve disease tracking; and focus on children's health issues, such as asthma, childhood cancer, and birth defects that may be linked to the environment, according to Pew Environmental Health Commission Executive Director Shelley Hearne.

Finite-element nonlinear transient response computer programs PLATE 1 and CIVM-PLATE 1 for the analysis of panels subjected to impulse or impact loads

NASA Technical Reports Server (NTRS)

Spilker, R. L.; Witmer, E. A.; French, S. E.; Rodal, J. J. A.

1980-01-01

Two computer programs are described for predicting the transient large deflection elastic viscoplastic responses of thin single layer, initially flat unstiffened or integrally stiffened, Kirchhoff-Lov ductile metal panels. The PLATE 1 program pertains to structural responses produced by prescribed externally applied transient loading or prescribed initial velocity distributions. The collision imparted velocity method PLATE 1 program concerns structural responses produced by impact of an idealized nondeformable fragment. Finite elements are used to represent the structure in both programs. Strain hardening and strain rate effects of initially isotropic material are considered.

Reusable Metallic Thermal Protection Systems Development

NASA Technical Reports Server (NTRS)

Blosser, Max L.; Martin, Carl J.; Daryabeigi, Kamran; Poteet, Carl C.

1998-01-01

Metallic thermal protection systems (TPS) are being developed to help meet the ambitious goals of future reusable launch vehicles. Recent metallic TPS development efforts at NASA Langley Research Center are described. Foil-gage metallic honeycomb coupons, representative of the outer surface of metallic TPS were subjected to low speed impact, hypervelocity impact, rain erosion, and subsequent arcjet exposure. TPS panels were subjected to thermal vacuum, acoustic, and hot gas flow testing. Results of the coupon and panel tests are presented. Experimental and analytical tools are being developed to characterize and improve internal insulations. Masses of metallic TPS and advanced ceramic tile and blanket TPS concepts are compared for a wide range of parameters.

The Effect of Widowhood on Mental Health - an Analysis of Anticipation Patterns Surrounding the Death of a Spouse.

PubMed

Siflinger, Bettina

2017-12-01

This study explores the effects of widowhood on mental health by taking into account the anticipation and adaptation to the partner's death. The empirical analysis uses representative panel data from the USA that are linked to administrative death records of the National Death Index. I estimate static and dynamic specifications of the panel probit model in which unobserved heterogeneity is modeled with correlated random effects. I find strong anticipation effects of the partner's death on the probability of depression, implying that the partner's death event cannot be assumed to be exogenous in econometric models. In the absence of any anticipation effects, the partner's death has long-lasting mental health consequences, leading to a significantly slower adaptation to widowhood. The results suggest that both anticipation effects and adaptation effects can be attributed to a caregiver burden and to the cause of death. The findings of this study have important implications for designing adequate social policies for the elderly US population that alleviate the negative consequences of bereavement. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Fit Assessment of N95 Filtering-Facepiece Respirators in the U.S. Centers for Disease Control and Prevention Strategic National Stockpile.

PubMed

Bergman, Michael; Zhuang, Ziqing; Brochu, Elizabeth; Palmiero, Andrew

National Institute for Occupational Safety and Health (NIOSH)-approved N95 filtering-facepiece respirators (FFR) are currently stockpiled by the U.S. Centers for Disease Control and Prevention (CDC) for emergency deployment to healthcare facilities in the event of a widespread emergency such as an influenza pandemic. This study assessed the fit of N95 FFRs purchased for the CDC Strategic National Stockpile. The study addresses the question of whether the fit achieved by specific respirator sizes relates to facial size categories as defined by two NIOSH fit test panels. Fit test data were analyzed from 229 test subjects who performed a nine-donning fit test on seven N95 FFR models using a quantitative fit test protocol. An initial respirator model selection process was used to determine if the subject could achieve an adequate fit on a particular model; subjects then tested the adequately fitting model for the nine-donning fit test. Only data for models which provided an adequate initial fit (through the model selection process) for a subject were analyzed for this study. For the nine-donning fit test, six of the seven respirator models accommodated the fit of subjects (as indicated by geometric mean fit factor > 100) for not only the intended NIOSH bivariate and PCA panel sizes corresponding to the respirator size, but also for other panel sizes which were tested for each model. The model which showed poor performance may not be accurately represented because only two subjects passed the initial selection criteria to use this model. Findings are supportive of the current selection of facial dimensions for the new NIOSH panels. The various FFR models selected for the CDC Strategic National Stockpile provide a range of sizing options to fit a variety of facial sizes.

Fit Assessment of N95 Filtering-Facepiece Respirators in the U.S. Centers for Disease Control and Prevention Strategic National Stockpile

PubMed Central

Bergman, Michael; Zhuang, Ziqing; Brochu, Elizabeth; Palmiero, Andrew

2016-01-01

National Institute for Occupational Safety and Health (NIOSH)-approved N95 filtering-facepiece respirators (FFR) are currently stockpiled by the U.S. Centers for Disease Control and Prevention (CDC) for emergency deployment to healthcare facilities in the event of a widespread emergency such as an influenza pandemic. This study assessed the fit of N95 FFRs purchased for the CDC Strategic National Stockpile. The study addresses the question of whether the fit achieved by specific respirator sizes relates to facial size categories as defined by two NIOSH fit test panels. Fit test data were analyzed from 229 test subjects who performed a nine-donning fit test on seven N95 FFR models using a quantitative fit test protocol. An initial respirator model selection process was used to determine if the subject could achieve an adequate fit on a particular model; subjects then tested the adequately fitting model for the nine-donning fit test. Only data for models which provided an adequate initial fit (through the model selection process) for a subject were analyzed for this study. For the nine-donning fit test, six of the seven respirator models accommodated the fit of subjects (as indicated by geometric mean fit factor > 100) for not only the intended NIOSH bivariate and PCA panel sizes corresponding to the respirator size, but also for other panel sizes which were tested for each model. The model which showed poor performance may not be accurately represented because only two subjects passed the initial selection criteria to use this model. Findings are supportive of the current selection of facial dimensions for the new NIOSH panels. The various FFR models selected for the CDC Strategic National Stockpile provide a range of sizing options to fit a variety of facial sizes. PMID:26877587

An Interim Report on NASA's Draft Space Technology Roadmaps

NASA Technical Reports Server (NTRS)

2011-01-01

NASA has developed a set of 14 draft roadmaps to guide the development of space technologies under the leadership of the NASA Office of the Chief Technologist (OCT). Each of these roadmaps focuses on a particular technology area (TA). The roadmaps are intended to foster the development of advanced technologies and concepts that address NASA's needs and contribute to other aerospace and national needs. OCT requested that the National Research Council conduct a study to review the draft roadmaps, gather and assess relevant community input, and make recommendations and suggest priorities to inform NASA's decisions as it finalizes its roadmaps. The statement of task states that "based on the results of the community input and its own deliberations, the steering committee will prepare a brief interim report that addresses high-level issues associated with the roadmaps, such as the advisability of modifying the number or technical focus of the draft NASA roadmaps." This interim report, which does not include formal recommendations, addresses that one element of the study charge. NASA requested this interim report so that it would have the opportunity to make an early start in modifying the draft roadmaps based on feedback from the panels and steering committee. The final report will address all other tasks in the statement of task. In particular, the final report will include a prioritization of technologies, will describe in detail the prioritization process and criteria, and will include specific recommendations on a variety of topics, including many of the topics mentioned in this interim report. In developing both this interim report and the final report to come, the steering committee draws on the work of six study panels organized by technical area, loosely following the organization of the 14 roadmaps, as follows: A Panel 1: Propulsion and Power TA01 Launch Propulsion Systems TA02 In-Space Propulsion Technologies TA03 Space Power and Energy Storage Systems TA13 Ground and Launch Systems Processing B Panel 2: Robotics, Communications, and Navigation TA04 Robotics, TeleRobotics, and Autonomous Systems TA05 Communication and Navigation Systems C Panel 3: Instruments and Computing TA08 Science Instruments, Observatories, and Sensor Systems TA11 Modeling, Simulation, Information Technology, and Data Processing D Panel 4: Human Health and Surface Exploration TA06 Human Health, Life Support, and Habitation Systems TA07 Human Exploration Destination Systems E Panel 5: Materials Panel TA10 Nanotechnology TA12 Materials, Structures, Mechanical Systems, and Manufacturing TA14 Thermal Management Systems F Panel 6: Entry, Descent, and Landing Panel TA09 Entry, Descent, and Landing Systems In addition to drawing on the expertise represented on the steering committee and panels, the committee obtained input from each of 14 public workshops held on each of the 14 roadmaps. At these 1-day workshops, invited speakers, guests, and members of the public engaged in discussions on the different technology areas and their value to NASA. Broad community input was also solicited from a public website, where more than 240 public comments were received on the draft roadmaps in response to application of criteria (such as benefit, risk and reasonableness, and alignment with NASA and national goals) that the steering committee established. This interim report reflects the results of deliberations by the steering committee in light of these public inputs as well as additional inputs from the six panels. The steering committee's final report will be completed early in 2012. That report will prioritize the technologies that span the entire scope of the 14 roadmaps and provide additional guidance on crosscutting themes and other relevant topics.

75 FR 39212 - Establishment of Department of Defense Federal Advisory Committee; Independent Panel Review of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-08

... of the Navy. The Panel shall: a. Carry out a study of the policies and management and organizational... to fulfill the legal mission of the Department of the Navy. b. In carrying out the study, the Panel... purposes of the study. In carrying out its study the Panel may review, and incorporate as appropriate, the...

Response of Composite Fuselage Sandwich Side Panels Subjected to Internal Pressure and Axial Tension

NASA Technical Reports Server (NTRS)

Rouse, Marshall; Ambur, Damodar R.; Dopker, Bernard; Shah, Bharat

1998-01-01

The results from an experimental and analytical study of two composite sandwich fuselage side panels for a transport aircraft are presented. Each panel has two window cutouts and three frames and utilizes a distinctly different structural concept. These panels have been evaluated with internal pressure loads that generate biaxial tension loading conditions. Design limit load and design ultimate load tests have been performed on both panels. One of the sandwich panels was tested with the middle frame removed to demonstrate the suitability of this two-frame design for supporting the prescribed biaxial loading conditions with twice the initial frame spacing of 20 inches. A damage tolerance study was conducted on the two-frame panel by cutting a notch in the panel that originates at the edge of a cutout and extends in the panel hoop direction through the window-belt area. This panel with a notch was tested in a combined-load condition to demonstrate the structural damage tolerance at the design limit load condition. Both the sandwich panel designs successfully satisfied all desired load requirements in the experimental part of the study, and experimental results from the two-frame panel with and without damage are fully explained by the analytical results. The results of this study suggest that there is potential for using sandwich structural concepts with greater than the usual 20-in. wide frame spacing to further reduce aircraft fuselage structural weight.

Application of a Multivariant, Caucasian-Specific, Genotyped Donor Panel for Performance Validation of MDmulticard®, ID-System®, and Scangel® RhD/ABO Serotyping

PubMed Central

Gassner, Christoph; Rainer, Esther; Pircher, Elfriede; Markut, Lydia; Körmöczi, Günther F.; Jungbauer, Christof; Wessin, Dietmar; Klinghofer, Roswitha; Schennach, Harald; Schwind, Peter; Schönitzer, Diether

2009-01-01

Summary Background Validations of routinely used serological typing methods require intense performance evaluations typically including large numbers of samples before routine application. However, such evaluations could be improved considering information about the frequency of standard blood groups and their variants. Methods Using RHD and ABO population genetic data, a Caucasian-specific donor panel was compiled for a performance comparison of the three RhD and ABO serological typing methods MDmulticard (Medion Diagnostics), ID-System (DiaMed) and ScanGel (Bio-Rad). The final test panel included standard and variant RHD and ABO genotypes, e.g. RhD categories, partial and weak RhDs, RhD DELs, and ABO samples, mainly to interpret weak serological reactivity for blood group A specificity. All samples were from individuals recorded in our local DNA blood group typing database. Results For ‘standard’ blood groups, results of performance were clearly interpretable for all three serological methods compared. However, when focusing on specific variant phenotypes, pronounced differences in reaction strengths and specificities were observed between them. Conclusions A genetically and ethnically predefined donor test panel consisting of 93 individual samples only, delivered highly significant results for serological performance comparisons. Such small panels offer impressive representative powers, higher as such based on statistical chances and large numbers only. PMID:21113264

Display device for indicating the value of a parameter in a process plant

DOEpatents

Scarola, Kenneth; Jamison, David S.; Manazir, Richard M.; Rescorl, Robert L.; Harmon, Daryl L.

1993-01-01

An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

Indicator system for advanced nuclear plant control complex

DOEpatents

Scarola, Kenneth; Jamison, David S.; Manazir, Richard M.; Rescorl, Robert L.; Harmon, Daryl L.

1993-01-01

An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

Indicator system for a process plant control complex

DOEpatents

Scarola, Kenneth; Jamison, David S.; Manazir, Richard M.; Rescorl, Robert L.; Harmon, Daryl L.

1993-01-01

An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

Console for a nuclear control complex

DOEpatents

Scarola, Kenneth; Jamison, David S.; Manazir, Richard M.; Rescorl, Robert L.; Harmon, Daryl L.

1993-01-01

An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

Alarm system for a nuclear control complex

DOEpatents

Scarola, Kenneth; Jamison, David S.; Manazir, Richard M.; Rescorl, Robert L.; Harmon, Daryl L.

1994-01-01

An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

Method of installing a control room console in a nuclear power plant

DOEpatents

Scarola, Kenneth; Jamison, David S.; Manazir, Richard M.; Rescorl, Robert L.; Harmon, Daryl L.

1994-01-01

An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

Advanced nuclear plant control complex

DOEpatents

Scarola, Kenneth; Jamison, David S.; Manazir, Richard M.; Rescorl, Robert L.; Harmon, Daryl L.

1993-01-01

An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

Advanced nuclear plant control room complex

DOEpatents

Scarola, Kenneth; Jamison, David S.; Manazir, Richard M.; Rescorl, Robert L.; Harmon, Daryl L.

1993-01-01

An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

Executive summary

NASA Technical Reports Server (NTRS)

Ayon, Juan A.

1992-01-01

The Astrotech 21 Optical Systems Technology Workshop was held in Pasadena, California on March 6-8, 1991. The purpose of the workshop was to examine the state of Optical Systems Technology at the National Aeronautics Space Administration (NASA), and in industry and academia, in view of the potential Astrophysics mission set currently being considered for the late 1990's through the first quarter of the 21st century. The principal result of the workshop is this publication, which contains an assessment of the current state of the technology, and specific technology advances in six critical areas of optics, all necessary for the mission set. The workshop was divided into six panels, each of about a dozen experts in specific fields, representing NASA, industry, and academia. In addition, each panel contained expertise that spanned the spectrum from x-ray to submillimeter wavelengths. This executive summary contains the principal recommendations of each panel. The six technology panels and their chairs were: (1) Wavefront Sensing, Control, and Pointing, Thomas Pitts, Itek Optical Systems, A Division of Litton; (2) Fabrication, Roger Angel, Steward Observatory, University of Arizona; (3) Materials and Structures, Theodore Saito, Lawrence Livermore National Laboratory; (4) Optical Testing, James Wyant, WYKO Corporation; (5) Optical Systems Integrated Modeling, Robert R. Shannon, Optical Sciences Center, University of Arizona; and (6) Advanced Optical Instruments Technology, Michael Shao, Jet Propulsion Laboratory, California Institute of Technology. This Executive Summary contains the principal recommendations of each panel.

The Emergence of Civil Rights in Wyoming.

ERIC Educational Resources Information Center

Wyoming State Advisory Committee to the U.S. Commission on Civil Rights, Cheyenne.

Local, state, and federal government representatives and private citizens participated in a two-day consultation on civil rights in Wyoming. Panel discussions focused on the difficulties of civil rights enforcement in the areas of housing and economic opportunity, medical care, education, the handicapped, employment discrimination, and women's…

76 FR 81944 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-29

... comprehensive data on health care and health care expenditures from all payors (including private payors... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Agency... MEPS Cancer SAQ The Medical Expenditure Panel Survey (MEPS) is a nationally representative survey of...

5 CFR 9901.103 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... and bonuses. Pay Pool Panel means management officials of the organizations or functions represented... employee, either employee-initiated or management-directed, to a different position or set of duties in the... of the bands. When moving from a non-NSPS position to NSPS, the band of the NSPS position is...

5 CFR 9901.103 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and bonuses. Pay Pool Panel means management officials of the organizations or functions represented... employee, either employee-initiated or management-directed, to a different position or set of duties in the... of the bands. When moving from a non-NSPS position to NSPS, the band of the NSPS position is...

Role of MAPK Activation in Prostate Cancer Development and Progression

DTIC Science & Technology

2008-03-01

marked by blue highlight). As in human patients, these large lesions caused bladder outlet obstruction and hydronephrosis – distention of the kidney...doxycycline (red outline; note heterogeneous signals within the lesion). Panel c is a representative MR image of hydronephrosis detected in an iBRAF

ASSOCIATION BETWEEN AIR POLLUTION EXPOSURE AND EXHALED NITRIC OXIDE IN AN ELDERLY PANEL. (R826780)

EPA Science Inventory

The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

Krikalev with CPAs in Node 1/Unity CBA

NASA Image and Video Library

2005-06-21

ISS011-E-09373 (21 June 2005) --- Cosmonaut Sergei K. Krikalev, Expedition 11 commander representing Russia's Federal Space Agency, prepares to uninstall two of the four Control Panel Assemblies (CPA) from the Unity node’s Common Berthing Assembly (CBA) on the International Space Station (ISS).

DEVELOPMENT OF A CORE COMBUSTION RESEARCH PROGRAM PLAN FOR EPA

EPA Science Inventory

The report described a plan, evolving from a review of the state- of-the-art in combustion research, for a long- term research program in combustion and thermal destruction. trawman plan was prepared and reviewed by a panel of representatives from industry, academia, and governme...

Report of the Interagency Optical Network Testbeds Workshop 2 September 12-14, 2006 NASA Ames Research Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joe Mambretti Richard desJardins

2006-05-01

A new generation of optical networking services and technologies is rapidly changing the world of communications. National and international networks are implementing optical services to supplement traditional packet routed services. On September 12-14, 2005, the Optical Network Testbeds Workshop 2 (ONT2), an invitation-only forum hosted by the NASA Research and Engineering Network (NREN) and co-sponsored by the Department of Energy (DOE), was held at NASA Ames Research Center in Mountain View, California. The aim of ONT2 was to help the Federal Large Scale Networking Coordination Group (LSN) and its Joint Engineering Team (JET) to coordinate testbed and network roadmaps describingmore » agency and partner organization views and activities for moving toward next generation communication services based on leading edge optical networks in the 3-5 year time frame. ONT2 was conceived and organized as a sequel to the first Optical Network Testbeds Workshop (ONT1, August 2004, www.nren.nasa.gov/workshop7). ONT1 resulted in a series of recommendations to LSN. ONT2 was designed to move beyond recommendations to agree on a series of “actionable objectives” that would proactively help federal and partner optical network testbeds and advanced research and education (R&E) networks to begin incorporating technologies and services representing the next generation of advanced optical networks in the next 1-3 years. Participants in ONT2 included representatives from innovative prototype networks (Panel A), basic optical network research testbeds (Panel B), and production R&D networks (Panels C and D), including “JETnets,” selected regional optical networks (RONs), international R&D networks, commercial network technology and service providers (Panel F), and senior engineering and R&D managers from LSN agencies and partner organizations. The overall goal of ONT2 was to identify and coordinate short and medium term activities and milestones for researching, developing, identifying, evaluating, and implementing the services, technologies, and interoperability mechanisms required. The roadmaps were formulated and presented not so much to reconcile the roadmaps with each other but rather to provide a means to compare the major ongoing and planned optical networking activities in the R&E community, organized by categories of activities and communities of interest. In addition, a 5-15 year network research perspective was provided by Panel E, which presented a report on two recent National Science Foundation workshops that examined long term research goals and directions, and industry perspectives on forthcoming optical networking technologies and services were presented in Panel F by representatives from optical technologies and network services industries. The report, “Mapping a Future for Optical Networking and Communications” is available on the NSF website (www.nsf.gov), and the industry perspectives will be available on the ONT2 website.« less

Development of circuit model for arcing on solar panels

NASA Astrophysics Data System (ADS)

Mehta, Bhoomi K.; Deshpande, S. P.; Mukherjee, S.; Gupta, S. B.; Ranjan, M.; Rane, R.; Vaghela, N.; Acharya, V.; Sudhakar, M.; Sankaran, M.; Suresh, E. P.

2010-02-01

The increased requirements of payload capacity of the satellites have resulted in much higher power requirements of the satellites. In order to minimize the energy loss during power transmission due to cable loss, use of high voltage solar panels becomes necessary. When a satellite encounters space plasma it floats negatively with respect to the surrounding space plasma environment. At high voltage, charging and discharging on solar panels causes the power system breakdown. Once a solar panel surface is charged and potential difference between surface insulator and conductor exceeds certain value, electrostatic discharge (ESD) may occur. This ESD may trigger a secondary arc that can destroy the solar panel circuit. ESD is also called as primary or minor arc and secondary is called major arc. The energy of minor arc is supplied by the charge stored in the coverglass of solar array and is a pulse of typically several 100 ns to several 100 μs duration. The damage caused by minor arc is less compared to major arcs, but it is observed that the minor arc is cause of major arc. Therefore it is important to develop an understanding of minor arc and mitigation techniques. In this paper we present a linear circuit analysis for minor arcs on solar panels. To study arcing event, a ground experimental facility to simulate space plasma environment has been developed at Facilitation Centre for Industrial Plasma Technologies (Institute for Plasma Research) in collaboration with Indian Space Research Organization's ISRO Satellite Technology Centre (ISAC). A linear circuit model has been developed to explain the experimental results by representing the coverglass, solar cell interconnect and wiring by an LCR circuit and the primary arc by an equivalent LR circuit. The aim of the circuit analysis is to predict the arc current which flows through the arc plasma. It is established from the model that the current depends on various parameters like potential difference between insulator and conductor, arc resistance, stored charge in the solar cell coverglass and the external capacitor that simulates wire harness. A close correlation between the experiments and circuit model results has been observed.

Evaluating Excessive Burden of Depression on Health Status and Health Care Utilization Among Patients With Hypertension in a Nationally Representative Sample From the Medial Expenditure Panel Survey (MEPS 2012).

PubMed

Shao, Hui; Mohammed, Mir Umer; Thomas, Nick; Babazadeh, Saleh; Yang, Shuang; Shi, Qian; Shi, Lizheng

2017-05-01

Depression and hypertension frequently present together in clinical practice. Evaluating the interaction between depression and hypertension would help stakeholders better understand the value of depression prevention in primary care. This retrospective study aimed to evaluate the excessive burden of depression on overall health and on health care utilization expenditure among hypertensive patients. A total of 7019 hypertensive patients (ICD-9-CM: 401) were identified from the 2012 Medical Expenditure Panel Survey (MEPS 2012) data, of which 936 patients had depression (ICD-9-CM: 311). Hypertension with depression was associated with worse health status (physical component score, -3.97 [17.9% reduction]; mental component score, -9.14 [9% reduction]), higher utilization of health care services (outpatient visits, 6.4 [63.8% higher]; nights of hospitalization, 0.9 [100% higher]; medication prescription, 22.6 [76.8% higher]), and higher health care expenditures (inpatient, $1953.2 [72% higher]; prescription drugs, $1995.5 [82% higher]).

Housing strain, mortgage foreclosure, and health.

PubMed

Cannuscio, Carolyn C; Alley, Dawn E; Pagán, José A; Soldo, Beth; Krasny, Sarah; Shardell, Michelle; Asch, David A; Lipman, Terri H

2012-01-01

Foreclosure rates have risen rapidly since 2005, reaching historically high levels. The purpose of this study was to examine the health implications of the current housing crisis. We conducted a cross-sectional online consumer panel survey including residents of California, Arizona, Nevada, and Florida (n = 798) to determine the feasibility of contacting distressed homeowners via the Internet and to assess mental and physical health among respondents across the spectrum from those having no housing strain to those in loan default or home foreclosure. Homeowners in default or foreclosure exhibited poorer mental health and more physical symptoms than renters, homeowners with moderate strain, and homeowners with no strainöfollowing a gradient that was consistent across multiple health indicators. Internet panel sampling was an efficient method of contacting distressed homeowners. Record-high foreclosure rates may have broad implications for nursing and public health. Homeowners in default or foreclosure represent an identifiable high-risk group that may benefit from coordinated, affordable health and social services. Copyright © 2012 Elsevier Inc. All rights reserved.

Cotinine analytical workshop report: consideration of analytical methods for determining cotinine in human body fluids as a measure of passive exposure to tobacco smoke.

PubMed Central

Watts, R R; Langone, J J; Knight, G J; Lewtas, J

1990-01-01

A two-day technical workshop was convened November 10-11, 1986, to discuss analytical approaches for determining trace amounts of cotinine in human body fluids resulting from passive exposure to environmental tobacco smoke (ETS). The workshop, jointly sponsored by the U.S. Environmental Protection Agency and Centers for Disease Control, was attended by scientists with expertise in cotinine analytical methodology and/or conduct of human monitoring studies related to ETS. The workshop format included technical presentations, separate panel discussions on chromatography and immunoassay analytical approaches, and group discussions related to the quality assurance/quality control aspects of future monitoring programs. This report presents a consensus of opinion on general issues before the workshop panel participants and also a detailed comparison of several analytical approaches being used by the various represented laboratories. The salient features of the chromatography and immunoassay analytical methods are discussed separately. PMID:2190812

A two dimensional study of rotor/airfoil interaction in hover

NASA Technical Reports Server (NTRS)

Lee, Chyang S.

1988-01-01

A two dimensional model for the chordwise flow near the wing tip of the tilt rotor in hover is presented. The airfoil is represented by vortex panels and the rotor is modeled by doublet panels. The rotor slipstream and the airfoil wake are simulated by free point vortices. Calculations on a 20 percent thick elliptical airfoil under a uniform rotor inflow are performed. Variations on rotor size, spacing between the rotor and the airfoil, ground effect, and the influence upper surface blowing in download reduction are analyzed. Rotor size has only a minor influence on download when it is small. Increase of the rotor/airfoil spacing causes a gradual decrease on download. Proximity to the ground effectively reduces the download and makes the wake unsteady. The surface blowing changes the whole flow structure and significantly reduces the download within the assumption of a potential solution. Improvement on the present model is recommended to estimate the wall jets induced suction on the airfoil lower surface.

Online Damage Detection on Metal and Composite Space Structures by Active and Passive Acoustic Methods

NASA Astrophysics Data System (ADS)

Scheerer, M.; Cardone, T.; Rapisarda, A.; Ottaviano, S.; Ftancesconi, D.

2012-07-01

In the frame of ESA funded programme Future Launcher Preparatory Programme Period 1 “Preparatory Activities on M&S”, Aerospace & Advanced Composites and Thales Alenia Space-Italia, have conceived and tested a structural health monitoring approach based on integrated Acoustic Emission - Active Ultrasound Damage Identification. The monitoring methods implemented in the study are both passive and active methods and the purpose is to cover large areas with a sufficient damage size detection capability. Two representative space sub-structures have been built and tested: a composite overwrapped pressure vessel (COPV) and a curved, stiffened Al-Li panel. In each structure, typical critical damages have been introduced: delaminations caused by impacts in the COPV and a crack in the stiffener of the Al-Li panel which was grown during a fatigue test campaign. The location and severity of both types of damages have been successfully assessed online using two commercially available systems: one 6 channel AE system from Vallen and one 64 channel AU system from Acellent.

The Likelihood of Experiencing Relative Poverty over the Life Course

PubMed Central

Rank, Mark R.; Hirschl, Thomas A.

2015-01-01

Research on poverty in the United States has largely consisted of examining cross-sectional levels of absolute poverty. In this analysis, we focus on understanding relative poverty within a life course context. Specifically, we analyze the likelihood of individuals falling below the 20th percentile and the 10th percentile of the income distribution between the ages of 25 and 60. A series of life tables are constructed using the nationally representative Panel Study of Income Dynamics data set. This includes panel data from 1968 through 2011. Results indicate that the prevalence of relative poverty is quite high. Consequently, between the ages of 25 to 60, 61.8 percent of the population will experience a year below the 20th percentile, and 42.1 percent will experience a year below the 10th percentile. Characteristics associated with experiencing these levels of poverty include those who are younger, nonwhite, female, not married, with 12 years or less of education, or who have a work disability. PMID:26200781

Dynamics Impact Tolerance of Shuttle RCC Leading Edge Panels Using LS-DYNA

NASA Technical Reports Server (NTRS)

Fasanella, Edwin L.; Jackson, Karen E.; Lyle, Karen H.; Jones, Lisa E.; Hardy, Robin C.; Spellman, Regina L.; Carney, Kelly S.; Melis, Matthew E.; Stockwell, Alan E.

2005-01-01

This paper describes a research program conducted to enable accurate prediction of the impact tolerance of the shuttle Orbiter leading-edge wing panels using physics-based codes such as LS-DYNA, a nonlinear, explicit transient dynamic finite element code. The shuttle leading-edge panels are constructed of Reinforced-Carbon-Carbon (RCC) composite material, which is used because of its thermal properties to protect the shuttle during reentry into the Earth's atmosphere. Accurate predictions of impact damage from insulating foam and other debris strikes that occur during launch required materials characterization of expected debris, including strain-rate effects. First, analytical models of individual foam and RCC materials were validated. Next, analytical models of foam cylinders impacting 6- in. x 6-in. RCC flat plates were developed and validated. LS-DYNA pre-test models of the RCC flat plate specimens established the impact velocity of the test for three damage levels: no-detectable damage, non-destructive evaluation (NDE) detectable damage, or visible damage such as a through crack or hole. Finally, the threshold of impact damage for RCC on representative Orbiter wing panels was predicted for both a small through crack and for NDE-detectable damage.

Dynamic Impact Tolerance of Shuttle RCC Leading Edge Panels using LS-DYNA

NASA Technical Reports Server (NTRS)

Fasanella, Edwin; Jackson, Karen E.; Lyle, Karen H.; Jones, Lisa E.; Hardy, Robin C.; Spellman, Regina L.; Carney, Kelly S.; Melis, Matthew E.; Stockwell, Alan E.

2008-01-01

This paper describes a research program conducted to enable accurate prediction of the impact tolerance of the shuttle Orbiter leading-edge wing panels using 'physics-based- codes such as LS-DYNA, a nonlinear, explicit transient dynamic finite element code. The shuttle leading-edge panels are constructed of Reinforced-Carbon-Carbon (RCC) composite material, which issued because of its thermal properties to protect the shuttle during re-entry into the Earth's atmosphere. Accurate predictions of impact damage from insulating foam and other debris strikes that occur during launch required materials characterization of expected debris, including strain-rate effects. First, analytical models of individual foam and RCC materials were validated. Next, analytical models of individual foam cylinders impacting 6-in. x 6-in. RCC flat plates were developed and validated. LS-DYNA pre-test models of the RCC flat plate specimens established the impact velocity of the test for three damage levels: no-detectable damage, non-destructive evaluation (NDE) detectable damage, or visible damage such as a through crack or hole. Finally, the threshold of impact damage for RCC on representative Orbiter wing panels was predicted for both a small through crack and for NDE-detectable damage.

The inverse problems of wing panel manufacture processes

NASA Astrophysics Data System (ADS)

Oleinikov, A. I.; Bormotin, K. S.

2013-12-01

It is shown that inverse problems of steady-state creep bending of plates in both the geometrically linear and nonlinear formulations can be represented in a variational formulation. Steady-state values of the obtained functionals corresponding to the solutions of the problems of inelastic deformation and springback are determined by applying a finite element procedure to the functionals. Optimal laws of creep deformation are formulated using the criterion of minimizing damage in the functionals of the inverse problems. The formulated problems are reduced to the problems solved by the finite element method using MSC.Marc software. Currently, forming of light metals poses tremendous challenges due to their low ductility at room temperature and their unusual deformation characteristics at hot-cold work: strong asymmetry between tensile and compressive behavior, and a very pronounced anisotropy. We used the constitutive models of steady-state creep of initially transverse isotropy structural materials the kind of the stress state has influence. The paper gives basics of the developed computer-aided system of design, modeling, and electronic simulation targeting the processes of manufacture of wing integral panels. The modeling results can be used to calculate the die tooling, determine the panel processibility, and control panel rejection in the course of forming.

An Exploratory Study: Assessment of Modeled Dioxin ...

EPA Pesticide Factsheets

EPA has released an external review draft entitled, An Exploratory Study: Assessment of Modeled Dioxin Exposure in Ceramic Art Studios(External Review Draft). The public comment period and the external peer-review workshop are separate processes that provide opportunities for all interested parties to comment on the document. In addition to consideration by EPA, all public comments submitted in accordance with this notice will also be forwarded to EPA’s contractor for the external peer-review panel prior to the workshop. EPA has realeased this draft document solely for the purpose of pre-dissemination peer review under applicable information quality guidelines. This document has not been formally disseminated by EPA. It does not represent and should not be construed to represent any Agency policy or determination. The purpose of this report is to describe an exploratory investigation of potential dioxin exposures to artists/hobbyists who use ball clay to make pottery and related products.

A reduced number of mtSNPs saturates mitochondrial DNA haplotype diversity of worldwide population groups.

PubMed

Salas, Antonio; Amigo, Jorge

2010-05-03

The high levels of variation characterising the mitochondrial DNA (mtDNA) molecule are due ultimately to its high average mutation rate; moreover, mtDNA variation is deeply structured in different populations and ethnic groups. There is growing interest in selecting a reduced number of mtDNA single nucleotide polymorphisms (mtSNPs) that account for the maximum level of discrimination power in a given population. Applications of the selected mtSNP panel range from anthropologic and medical studies to forensic genetic casework. This study proposes a new simulation-based method that explores the ability of different mtSNP panels to yield the maximum levels of discrimination power. The method explores subsets of mtSNPs of different sizes randomly chosen from a preselected panel of mtSNPs based on frequency. More than 2,000 complete genomes representing three main continental human population groups (Africa, Europe, and Asia) and two admixed populations ("African-Americans" and "Hispanics") were collected from GenBank and the literature, and were used as training sets. Haplotype diversity was measured for each combination of mtSNP and compared with existing mtSNP panels available in the literature. The data indicates that only a reduced number of mtSNPs ranging from six to 22 are needed to account for 95% of the maximum haplotype diversity of a given population sample. However, only a small proportion of the best mtSNPs are shared between populations, indicating that there is not a perfect set of "universal" mtSNPs suitable for all population contexts. The discrimination power provided by these mtSNPs is much higher than the power of the mtSNP panels proposed in the literature to date. Some mtSNP combinations also yield high diversity values in admixed populations. The proposed computational approach for exploring combinations of mtSNPs that optimise the discrimination power of a given set of mtSNPs is more efficient than previous empirical approaches. In contrast to precedent findings, the results seem to indicate that only few mtSNPs are needed to reach high levels of discrimination power in a population, independently of its ancestral background.

The Effects of Hygrothermal Aging on the Impact Penetration Resistance of Triaxially Braided Composites

NASA Technical Reports Server (NTRS)

Pereira, J. Michael; Revilock, Duane M.; Ruggeri, Charles R.; Roberts, Gary D.; Kohlman, Lee W.; Miller, Sandi G.

2016-01-01

An experimental study was conducted to measure the effects of long term hygrothermal aging on the impact penetration resistance of triaxially braided polymer composites. Flat panels of three different materials were subjected to repeated cycles of high and low temperature and high and low humidity for two years. Samples of the panels were periodically tested under impact loading during the two year time period. The purpose of the study was to identify and quantify any degradation in impact penetration resistance of these composites under cyclic temperature and humidity conditions experienced by materials in the fan section of commercial gas turbine engines for a representative aircraft flight cycle. The materials tested consisted of Toray ® T700S carbon fibers in a 2D triaxial braid with three different resins, Cycom® PR520, a toughened resin, Hercules® 3502, an untoughened resin and EPON 862, intermediate between the two. The fiber preforms consisted of a quasi-isotropic 0/+60/-60 braid with 24K tows in the axial direction and 12K tows in the bias directions. The composite panels were manufactured using a resin transfer molding process producing panels with a thickness of 0.125 inches. The materials were tested in their as-processed condition and again after one year and two years of aging (1.6 years in the case of E862). The aging process involved subjecting the test panels to two cycles per day of high and low temperature and high and low humidity. A temperature range of -60degF to 250degF and a humidity range of 0 to 85% rh was used to simulate extreme conditions for composite components in the fan section of a commercial gas turbine engine. Additional testing was conducted on the as-processed PR520 composite under cryogenic conditions. After aging there was some change in the failure pattern, but there was no reduction in impact penetration threshold for any of the three systems, and in the case of the 3502 system, a significant increase in penetration threshold. There was also an increase in the penetration resistance of the PR520 system impacted under cryogenic conditions.

A Reduced Number of mtSNPs Saturates Mitochondrial DNA Haplotype Diversity of Worldwide Population Groups

PubMed Central

Salas, Antonio; Amigo, Jorge

2010-01-01

Background The high levels of variation characterising the mitochondrial DNA (mtDNA) molecule are due ultimately to its high average mutation rate; moreover, mtDNA variation is deeply structured in different populations and ethnic groups. There is growing interest in selecting a reduced number of mtDNA single nucleotide polymorphisms (mtSNPs) that account for the maximum level of discrimination power in a given population. Applications of the selected mtSNP panel range from anthropologic and medical studies to forensic genetic casework. Methodology/Principal Findings This study proposes a new simulation-based method that explores the ability of different mtSNP panels to yield the maximum levels of discrimination power. The method explores subsets of mtSNPs of different sizes randomly chosen from a preselected panel of mtSNPs based on frequency. More than 2,000 complete genomes representing three main continental human population groups (Africa, Europe, and Asia) and two admixed populations (“African-Americans” and “Hispanics”) were collected from GenBank and the literature, and were used as training sets. Haplotype diversity was measured for each combination of mtSNP and compared with existing mtSNP panels available in the literature. The data indicates that only a reduced number of mtSNPs ranging from six to 22 are needed to account for 95% of the maximum haplotype diversity of a given population sample. However, only a small proportion of the best mtSNPs are shared between populations, indicating that there is not a perfect set of “universal” mtSNPs suitable for all population contexts. The discrimination power provided by these mtSNPs is much higher than the power of the mtSNP panels proposed in the literature to date. Some mtSNP combinations also yield high diversity values in admixed populations. Conclusions/Significance The proposed computational approach for exploring combinations of mtSNPs that optimise the discrimination power of a given set of mtSNPs is more efficient than previous empirical approaches. In contrast to precedent findings, the results seem to indicate that only few mtSNPs are needed to reach high levels of discrimination power in a population, independently of its ancestral background. PMID:20454657

Using patient values and preferences to inform the importance of health outcomes in practice guideline development following the GRADE approach.

PubMed

Zhang, Yuan; Coello, Pablo Alonso; Brożek, Jan; Wiercioch, Wojtek; Etxeandia-Ikobaltzeta, Itziar; Akl, Elie A; Meerpohl, Joerg J; Alhazzani, Waleed; Carrasco-Labra, Alonso; Morgan, Rebecca L; Mustafa, Reem A; Riva, John J; Moore, Ainsley; Yepes-Nuñez, Juan José; Cuello-Garcia, Carlos; AlRayees, Zulfa; Manja, Veena; Falavigna, Maicon; Neumann, Ignacio; Brignardello-Petersen, Romina; Santesso, Nancy; Rochwerg, Bram; Darzi, Andrea; Rojas, Maria Ximena; Adi, Yaser; Bollig, Claudia; Waziry, Reem; Schünemann, Holger J

2017-05-02

There are diverse opinions and confusion about defining and including patient values and preferences (i.e. the importance people place on the health outcomes) in the guideline development processes. This article aims to provide an overview of a process for systematically incorporating values and preferences in guideline development. In 2013 and 2014, we followed the Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach to adopt, adapt and develop 226 recommendations in 22 guidelines for the Ministry of Health of the Kingdom of Saudi Arabia. To collect context-specific values and preferences for each recommendation, we performed systematic reviews, asked clinical experts to provide feedback according to their clinical experience, and consulted patient representatives. We found several types of studies addressing the importance of outcomes, including those reporting utilities, non-utility measures of health states based on structured questionnaires or scales, and qualitative studies. Guideline panels used the relative importance of outcomes based on values and preferences to weigh the balance of desirable and undesirable consequences of alternative intervention options. However, we found few studies addressing local values and preferences. Currently there are different but no firmly established processes for integrating patient values and preferences in healthcare decision-making of practice guideline development. With GRADE Evidence-to-Decision (EtD) frameworks, we provide an empirical strategy to find and incorporate values and preferences in guidelines by performing systematic reviews and eliciting information from guideline panel members and patient representatives. However, more research and practical guidance are needed on how to search for relevant studies and grey literature, assess the certainty of this evidence, and best summarize and present the findings.

NIH consensus development conference statement: Lactose intolerance and health.

PubMed

Suchy, Frederick J; Brannon, Patsy M; Carpenter, Thomas O; Fernandez, Jose R; Gilsanz, Vicente; Gould, Jeffrey B; Hall, Karen; Hui, Siu L; Lupton, Joanne; Mennella, Julie; Miller, Natalie J; Osganian, Stavroula Kalis; Sellmeyer, Deborah E; Wolf, Marshall A

2010-02-24

To provide health care providers, patients, and the general public with a responsible assessment of currently available data on lactose intolerance and health. A non-DHHS, nonadvocate 14-member panel representing the fields of internal medicine, pediatrics, pediatric and adult endocrinology, gastroenterology, hepatology, neonatology and perinatology, geriatrics, racial/ethnic disparities, radiology, maternal and fetal nutrition, vitamin and mineral metabolism, nutritional sciences, bone health, preventive medicine, biopsychology, biostatistics, statistical genetics, epidemiology, and a public representative. In addition, 22 experts from pertinent fields presented data to the panel and conference audience. Presentations by experts and a systematic review of the literature prepared by the University of Minnesota Evidence-based Practice Center, through the Agency for Healthcare Research and Quality. Scientific evidence was given precedence over anecdotal experience. The panel drafted its statement based on scientific evidence presented in open forum and on published scientific literature. The draft statement was presented on the final day of the conference and circulated to the audience for comment. The panel released a revised statement later that day at http://consensus.nih.gov. This statement is an independent report of the panel and is not a policy statement of the NIH or the Federal Government. • Lactose intolerance is a real and important clinical syndrome, but its true prevalence is not known. • The majority of people with lactose malabsorption do not have clinical lactose intolerance. Many individuals who think they are lactose intolerant are not lactose malabsorbers. • Many individuals with real or perceived lactose intolerance avoid dairy and ingest inadequate amounts of calcium and vitamin D, which may predispose them to decreased bone accrual, osteoporosis, and other adverse health outcomes. In most cases, individuals do not need to eliminate dairy consumption completely. • Evidence-based dietary approaches with and without dairy foods and supplementation strategies are needed to ensure appropriate consumption of calcium and other nutrients in lactose-intolerant individuals. • Educational programs and behavioral approaches for individuals and their healthcare providers should be developed and validated to improve the nutrition and symptoms of individuals with lactose intolerance and dairy avoidance.

The Stammering Information Programme: a Delphi study.

PubMed

Berquez, Ali E; Cook, Frances M; Millard, Sharon K; Jarvis, Effie

2011-09-01

To find out what information children, parents and education staff feel would be important to know to support a child who stutters in the educational environment, in order to develop appropriate resources. A Delphi study was carried out to seek the opinions of experts about the information to include. A structured six stage process was completed in order to gain consensus within four expert panels: children who stutter (CWS) aged 7-11 (n=25); young people who stutter aged 12-18 (n=27); parents of children and young people who stutter aged 2-18 (n=67); and members of the education workforce (n=35). In response to the questions, 538 statements were generated across the four expert panels, categorised and reduced to 276. Of the 154 rating questionnaires sent out, 99 were returned (64.2% response rate). The top 32 statements, which were those most highly rated and with the greatest consensus, were retained to inform the resources. This study demonstrates the value of including service users when devising materials aimed for the benefit of CWS. The methodology employed ensured that ideas, perceptions and needs were representative of a range of people who experience stuttering from different perspectives. The results indicated that each expert panel had different priorities of what should be included. The resulting resources may therefore be considered to have high content validity and would be predicted to meet the needs of those who require them. The reader will be able to (1) define the Delphi Approach (2) discuss the development of a user led resource for raising awareness about stuttering. Copyright © 2011 Elsevier Inc. All rights reserved.

Effective self-management strategies for bipolar disorder: A community-engaged Delphi Consensus Consultation study.

PubMed

Michalak, Erin E; Suto, Melinda J; Barnes, Steven J; Hou, Sharon; Lapsley, Sara; Scott, Mike W; Murray, Greg; Austin, Jehannine; Elliott, Nusha Balram; Berk, Lesley; Crest Bd

2016-12-01

Self-management represents an important complement to psychosocial treatments for bipolar disorder (BD), but research is limited. Specifically, little is known about self-management approaches for elevated mood states; this study investigated self-management strategies for: (1) maintaining balance in mood, and (2) stopping progression into hypomania/mania. To identify the common components of BD self-management, Delphi Consensus Consultation methods were combined with a Community-Based Participatory Research (CBPR) approach across five study phases: (1) Qualitative dataset content analysis; (2) Academic/grey literature reviews; (3) Content analysis; (4) Two Delphi rounds (rating strategies on a 5-point Likert scale, Very Unhelpful-Very Helpful), and; (5) Quantitative analysis and interpretation. Participants were people with BD and healthcare providers. Phases 1 and 2 identified 262 and 3940 candidate strategies, respectively; 3709 were discarded as duplicates/unintelligible. The remaining 493 were assessed via Delphi methods in Phase 4: 101 people with BD and 52 healthcare providers participated in Round 1; 83 of the BD panel (82%) and 43 of the healthcare provider panel (83%) participated in Round 2-exploratory factor analysis (EFA) was conducted on Round 2 results. EFA was underpowered and sample was not ethnically diverse, limiting generalizability. High concordance was observed in ratings of strategy effectiveness between the two panels. Future research could usefully investigate the provisional discovery here of underlying factors which link individual strategies. For example, 'maintaining hope' underpinned strategies for maintaining balance, and 'decreasing use of stimulants' underpinned strategies to interrupt hypo/manic ascent. There is merit in combining CBPR and Delphi methods. Copyright © 2016 Elsevier B.V. All rights reserved.

Advanced composite vertical stabilizer for DC-10 transport aircraft

NASA Technical Reports Server (NTRS)

Stephens, C. O.

1979-01-01

Structural design, tooling, fabrication, and test activities are reported for a program to develop an advanced composite vertical stabilizer (CVS) for the DC 10 Commercial Transport Aircraft. Structural design details are described and the status of structural and weight analyses are reported. A structural weight reduction of 21.7% is currently predicted. Test results are discussed for sine wave stiffened shear webs containing representative of the CVS spar webs and for lightning current transfer and tests on a panel representative of the CVS skins.

Safety and Efficacy of Over-the-Counter Drug Use by the Elderly. Hearing before the Subcommittee on Health and Long-Term Care of the Select Committee on Aging. House of Representatives, Ninety-Eighth Congress, First Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Select Committee on Aging.

This document contains the prepared statements and panel testimony from the Congressional hearing on over-the-counter (OTC) drug use by the elderly. Opening statements are given by Representatives Claude Pepper (chairman), Ralph Regula, Mary Rose Oakar, Michael Bilirakis, Tom Lantos, and Hal Daub. Topics which are covered include the incidence and…

Intercollegiate Sports (Part 2). Hearings before the Subcommittee on Commerce, Consumer Protection, and Competitiveness of the Committee on Energy and Commerce. House of Representatives, One Hundred Third Congress, First Session (June 23 and August 4, 1993).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Energy and Commerce.

The House of Representatives Subcommittee on Commerce, Consumer Protection, and Competitiveness met to hear testimony on sex discrimination in secondary and college level athletic programs. The witnesses on the first panel were all current or former college students and plaintiffs in four recent and significant Title IX cases. Title IX was part of…

Inclusion of Population-specific Reference Panel from India to the 1000 Genomes Phase 3 Panel Improves Imputation Accuracy.

PubMed

Ahmad, Meraj; Sinha, Anubhav; Ghosh, Sreya; Kumar, Vikrant; Davila, Sonia; Yajnik, Chittaranjan S; Chandak, Giriraj R

2017-07-27

Imputation is a computational method based on the principle of haplotype sharing allowing enrichment of genome-wide association study datasets. It depends on the haplotype structure of the population and density of the genotype data. The 1000 Genomes Project led to the generation of imputation reference panels which have been used globally. However, recent studies have shown that population-specific panels provide better enrichment of genome-wide variants. We compared the imputation accuracy using 1000 Genomes phase 3 reference panel and a panel generated from genome-wide data on 407 individuals from Western India (WIP). The concordance of imputed variants was cross-checked with next-generation re-sequencing data on a subset of genomic regions. Further, using the genome-wide data from 1880 individuals, we demonstrate that WIP works better than the 1000 Genomes phase 3 panel and when merged with it, significantly improves the imputation accuracy throughout the minor allele frequency range. We also show that imputation using only South Asian component of the 1000 Genomes phase 3 panel works as good as the merged panel, making it computationally less intensive job. Thus, our study stresses that imputation accuracy using 1000 Genomes phase 3 panel can be further improved by including population-specific reference panels from South Asia.

Income inequality widens the existing income-related disparity in depression risk in post-apartheid South Africa: Evidence from a nationally representative panel study.

PubMed

Burns, Jonathan K; Tomita, Andrew; Lund, Crick

2017-05-01

Income inequality (II) and poverty are major challenges in South Africa (SA) yet little is known about their interaction on population mental health. We explored relationships between district II, household income (HHI) and depressive symptoms in national panel data. We used 3 waves (2008, 2010, 2012) of the SA National Income Dynamics Study (n=25936) in adjusted mixed effects logistic regression to assess if the relationship between HHI and depressive symptoms is dependent on level of II. Depressive symptoms were assessed with Centre for Epidemiologic Studies Depression scale, and District inequality ratios (P10P90) derived from HHI distributions in 53 districts. Lower HHI and increasing II were associated with depressive symptoms. The interaction term between HHI and II on depressive symptoms was significant (β=0.01, 95% CI: <0.01-0.01); with increasing II and decreasing HHI, depression risk increased. II widens income-related disparities in depression risk in SA, with policy implications for understanding socioeconomic determinants of mental health and informing global efforts to reduce disparities in high poverty and inequality contexts. Copyright © 2017 Elsevier Ltd. All rights reserved.

Income inequality widens the existing income-related disparity in depression risk in post-apartheid South Africa: evidence from a nationally representative panel study

PubMed Central

Burns, Jonathan K; Tomita, Andrew; Lund, Crick

2017-01-01

Aim Income inequality (II) and poverty are major challenges in South Africa (SA) yet little is known about their interaction on population mental health. We explored relationships between district II, household income (HHI) and depressive symptoms in national panel data. Method We used 3 waves (2008, 2010, 2012) of the SA National Income Dynamics Study (n=25936) in adjusted mixed effects logistic regression to assess if the relationship between HHI and depressive symptoms is dependent on level of II. Depressive symptoms were assessed with Centre for Epidemiologic Studies Depression scale, and District inequality ratios (P10P90) derived from HHI distributions in 53 districts. Results Lower HHI and increasing II were associated with depressive symptoms. The interaction term between HHI and II on depressive symptoms was significant (β=0.01, 95% CI:<0.01–0.01); with increasing II and decreasing HHI, depression risk increased. Conclusion II widens income-related disparities in depression risk in SA, with policy implications for understanding socioeconomic determinants of mental health and informing global efforts to reduce disparities in high poverty and inequality contexts. PMID:28237744

Modal parameter identification of a compression-loaded CFRP stiffened plate and correlation with its buckling behaviour

NASA Astrophysics Data System (ADS)

Chaves-Vargas, M.; Dafnis, A.; Reimerdes, H.-G.; Schröder, K.-U.

2015-10-01

In order to study the dynamic response and the buckling behaviour of several load-carrying structural components of civil aircraft when subjected to transient load scenarios such as gusts or a landing impact, a generic mid-size aircraft is defined within the European research project DAEDALOS. From this aircraft, several sections or panels in different regions such as wing, vertical tailplane and fuselage are defined. The stiffened carbon-fibre-reinforced plastic (CFRP) plate investigated within the present work represents a simplified version of the wing panel selected from the generic aircraft. As part of the current work, the buckling behaviour and the modal properties of the stiffened plate under the effect of a static in-plane compression load are studied. This is accomplished by means of a test series including quasi-static buckling tests and an experimental modal analysis (EMA). One of the key objectives pursued is the correlation of the modal properties to the buckling behaviour by studying the relationship between the natural frequencies of the stiffened plate and its corresponding buckling load. The experimental work is verified by a finite element analysis.

Lightweight panel study 2012: Perceptions and usage by North American wood products manufacturers

Treesearch

Urs Buehlmann; Matt Bumgardner; Karl D. Forth

2012-01-01

Lightweight panels (panels made of two thin panels on the outside and a lightweight material in the core) can offer enhanced performance, reduced material use, and new design opportunities over traditional types of panels. Opportunities exist for the adoption of lightweight panels by the secondary wood industry in North America, as 62 percent of respondents to a recent...

76 FR 39377 - Proposed Information Collection; Comment Request; 2012 Survey of Income and Program Participation...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-06

... survey designed as a continuous series of national panels molded around an annual interview structured... DEPARTMENT OF COMMERCE Census Bureau Proposed Information Collection; Comment Request; 2012 Survey... representative and respondent is authentic and follows critical survey protocol as defined by the sponsor and...

78 FR 70072 - Meeting of the Military Compensation and Retirement Modernization Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-22

... beneficiaries and other interested parties regarding pay, retirement, health benefits and quality of life... and education community representatives, and dining facilities, grocery and other quality of life... 12:30 p.m., Medical Services 3:00 p.m., Quality of Life Matters The Panel Testimony heard on both...

Prevalence and Costs of Five Chronic Conditions in Children

ERIC Educational Resources Information Center

Miller, Gabrielle F.; Coffield, Edward; Leroy, Zanie; Wallin, Robin

2016-01-01

The objective is to examine the prevalence and health-care costs associated with asthma, epilepsy, hypertension, food allergies, and diabetes in children aged 0-18 years. Prevalence was calculated using 2005-2012 Medical Expenditure Panel Survey (MEPS) data, a population-based, nationally representative sample. Using MEPS, two-part models…

Novel lyssavirus in Natterer's bat, Germany.

PubMed

Freuling, Conrad M; Beer, Martin; Conraths, Franz J; Finke, Stefan; Hoffmann, Bernd; Keller, Barbara; Kliemt, Jeannette; Mettenleiter, Thomas C; Mühlbach, Elke; Teifke, Jens P; Wohlsein, Peter; Müller, Thomas

2011-08-01

A virus isolated from a Natterer's bat (Myotis nattererii) in Germany was differentiated from other lyssaviruses on the basis of the reaction pattern of a panel of monoclonal antibodies. Phylogenetic analysis supported the assumption that the isolated virus, Bokeloh bat lyssavirus, may represent a new member of the genus Lyssavirus.

7 CFR 3405.11 - Content of a proposal.

Code of Federal Regulations, 2011 CFR

2011-01-01

... authorized organizational representative for the applicant institution. (3) The title of the project shown on... peer panel meeting. The name of the institution, the targeted need area(s), and the title of the... identify the other complementary project(s) by citing the name of the submitting institution, the title of...

First in Class

ERIC Educational Resources Information Center

Collins, Mary Ellen

2009-01-01

Tight budgets and an uncertain economy did not diminish creativity for the 2009 CASE Circle of Excellence Award winners. In fact, judges gave 19 Grand Gold awards this year, a significant increase over recent years. The program received 2,800 entries from 690 member institutions, representing 13 different countries. Forty-four panels of volunteer…

Horowitz adheres a STS-105 mission logo to a Node 1 panel

NASA Image and Video Library

2001-08-01

ISS003-E-6189 (August 2001) --- Astronaut Scott J. Horowitz, STS-105 mission commander, adds the STS-105 crew patch to the growing collection of those representing Shuttle crews who have worked on the International Space Station (ISS). This image was taken with a digital still camera.

Fire performance of oriented strandboard

Treesearch

Robert H. White; Jerrold E. Winandy

2006-01-01

Wood-based composites represent a continuously increasing share of the wood products market. Commercial construction will be important for future expansion of the structural panels market. Use of engineered wood products as an alternative to traditional solid wood lumber is also increasing. A recent series of cone calorimeter tests evaluated the performance of several...

Materials Science | NREL

Science.gov Websites

sulfide (SnS). The top image represents output from atomic force microscopy for the molecular sections and computations. The image shows modeled electronic density of states (top panel) of the the bandgap of the narrow-gap crystalline semiconductors (left and right sides of the image) when it

Advancing Adult Education Research. Meeting Summary (Washington, DC, April 26, 2012)

ERIC Educational Resources Information Center

Institute of Education Sciences, 2012

2012-01-01

The goal of this meeting was to discuss the challenges of adult education and mechanisms to better understand and address those challenges through research. The meeting was structured around three panel discussions representing the perspectives of State directors of adult education programs, adult education researchers, and education research…

Future Defence Budget Constraints: Challenges and Opportunities (Contraintes futures sur les budgets de defense: Defis et opportunites)

DTIC Science & Technology

2016-12-01

collaborative effort is addressed by six Technical Panels who manage a wide range of scientific research activities, a Group specialising in modelling and...HFM Human Factors and Medicine Panel • IST Information Systems Technology Panel • NMSG NATO Modelling and Simulation Group • SAS System Analysis...and Studies Panel • SCI Systems Concepts and Integration Panel • SET Sensors and Electronics Technology Panel These Panels and Group are the

Involving patients in a multidisciplinary European consensus process and in the development of a 'patient summary of the consensus document for colon and rectal cancer care'.

PubMed

Boelens, Petra G; Taylor, Claire; Henning, Geoffrey; Marang-van de Mheen, Perla J; Espin, Eloy; Wiggers, Theo; Gore-Booth, Jola; Moss, Barbara; Valentini, Vincenzo; van de Velde, Cornelis J H

2014-01-01

High-quality cancer care should be accessible for patients and healthcare professionals. Involvement of patients as partners in guideline formation and consensus processes is still rarely found. EURECCA, short for European Registration of Cancer Care, is the platform to improve outcomes of cancer care by reducing variation in the diagnostic and treatment process. EURECCA acknowledges the important role of patients in implementation of consensus information in clinical practice. The aim of this article is to describe the process of involving patients in the consensus process and in developing the patient summary of the consensus for colon and rectal cancer care. The Delphi method for achieving consensus was used. Three online voting rounds and one tele-voting round were offered to an expert panel of oncology professionals and patient representatives. At four different stages, patients and/or patient representatives were involved in the process: (1) during the consensus process, (2) lecturing about the role of the patient, (3) development of the patient summary, and (4) testing the patient summary. Representatives were invited to the voting and commenting rounds of this process and given an equal vote. Although patients were not consulted during the planning stages of this process, patient involvement increased following the panel's discussion of the implementation of the consensus among the patient population. After the consensus meeting, the patient summary was written by patient representatives, oncologists and nurses. A selection of proactive patients reviewed the draft patient summary; responses were positive and several patient-reported outcomes were added. Questionnaires to evaluate the use and implementation of the patient summary in daily practice are currently being developed and tested. Patient consultation will be needed in future planning for selection of topics. The present study may function as a model for future consensus processes to involve patients at different stages and to implement both patient and healthcare professional versions in daily practice.

United States Metric Board. A Study of Metric Measurement and Legislation. Volume 1.

DTIC Science & Technology

1979-09-10

LEGAL ADVISORY PANEL A. Panel Membership VIII.I B. Role of the Panel VIII.2 IX. DATA COLLECTION METHODOLOGY A. Basic Research IX.I B. Computer...First, the Panel was involved in a review of the overall study design . Second, the Panel reviewed the various change mechanisms which were identified...collection methodology . • X summarizes the relevant experiences of Canada and Australia. MIOOLEBNX *NEARC CRNTE 1.3 II. THE UNITED STATES METRIC

Active control of turbulent boundary layer-induced sound transmission through the cavity-backed double panels

NASA Astrophysics Data System (ADS)

Caiazzo, A.; Alujević, N.; Pluymers, B.; Desmet, W.

2018-05-01

This paper presents a theoretical study of active control of turbulent boundary layer (TBL) induced sound transmission through the cavity-backed double panels. The aerodynamic model used is based on the Corcos wall pressure distribution. The structural-acoustic model encompasses a source panel (skin panel), coupled through an acoustic cavity to the radiating panel (trim panel). The radiating panel is backed by a larger acoustic enclosure (the back cavity). A feedback control unit is located inside the acoustic cavity between the two panels. It consists of a control force actuator and a sensor mounted at the actuator footprint on the radiating panel. The control actuator can react off the source panel. It is driven by an amplified velocity signal measured by the sensor. A fully coupled analytical structural-acoustic model is developed to study the effects of the active control on the sound transmission into the back cavity. The stability and performance of the active control system are firstly studied on a reduced order model. In the reduced order model only two fundamental modes of the fully coupled system are assumed. Secondly, a full order model is considered with a number of modes large enough to yield accurate simulation results up to 1000 Hz. It is shown that convincing reductions of the TBL-induced vibrations of the radiating panel and the sound pressure inside the back cavity can be expected. The reductions are more pronounced for a certain class of systems, which is characterised by the fundamental natural frequency of the skin panel larger than the fundamental natural frequency of the trim panel.

Smallpox and pan-Orthopox Virus Detection by Real-Time 3′-Minor Groove Binder TaqMan Assays on the Roche LightCycler and the Cepheid Smart Cycler Platforms

PubMed Central

Kulesh, David A.; Baker, Robert O.; Loveless, Bonnie M.; Norwood, David; Zwiers, Susan H.; Mucker, Eric; Hartmann, Chris; Herrera, Rafael; Miller, David; Christensen, Deanna; Wasieloski, Leonard P.; Huggins, John; Jahrling, Peter B.

2004-01-01

We designed, optimized, and extensively tested several sensitive and specific real-time PCR assays for rapid detection of both smallpox and pan-orthopox virus DNAs. The assays are based on TaqMan 3′-minor groove binder chemistry and were performed on both the rapid-cycling Roche LightCycler and the Cepheid Smart Cycler platforms. The hemagglutinin (HA) J7R, B9R, and B10R genes were used as targets for the variola virus-specific assays, and the HA and DNA polymerase-E9L genes were used as targets for the pan-orthopox virus assays. The five orthopox virus assays were tested against a panel of orthopox virus DNAs (both genomic and cloned) at the U.S. Army Medical Research Institute of Infectious Diseases (USAMRIID). The results indicated that each assay was capable of detecting both the appropriate cloned gene and genomic DNA. The assays showed no cross-reactivity to the 78 DNAs in the USAMRIID bacterial cross-reactivity panel. The limit of detection (LOD) of each assay was determined to be between 12 and 25 copies of target DNA. The assays were also run against a blind panel of DNAs at the Centers for Disease Control and Prevention (CDC) on both the LightCycler and the Smart Cycler. The panel consisted of eight different variola virus isolates, five non-variola virus orthopox virus isolates, two varicella-zoster virus isolates, and one herpes simplex virus isolate. Each sample was tested in triplicate at 2.5 ng, 25 pg, 250 fg, and 2.5 fg, which represent 1.24 × 107, 1.24 × 105, 1.24 × 103, and 1.24 × 101 genome equivalents, respectively. The results indicated that each of the five assays was 100% specific (no false positives) when tested against both the USAMRIID panels and the CDC blind panel. With the CDC blind panel, the LightCycler was capable of detecting 96.2% of the orthopox virus DNAs and 93.8% of the variola virus DNAs. The Smart Cycler was capable of detecting 92.3% of the orthopox virus DNAs and between 75 and 93.8% of the variola virus DNAs. However, all five assays had nearly 100% sensitivity on both machines with samples above the LOD (>12 gene copies). These real-time PCR assays represent a battery of tests to screen for and confirm the presence of variola virus DNA. The early detection of a smallpox outbreak is crucial whether the incident is an act of bioterrorism or an accidental occurrence. PMID:14766823

Smallpox and pan-orthopox virus detection by real-time 3'-minor groove binder TaqMan assays on the roche LightCycler and the Cepheid smart Cycler platforms.

PubMed

Kulesh, David A; Baker, Robert O; Loveless, Bonnie M; Norwood, David; Zwiers, Susan H; Mucker, Eric; Hartmann, Chris; Herrera, Rafael; Miller, David; Christensen, Deanna; Wasieloski, Leonard P; Huggins, John; Jahrling, Peter B

2004-02-01

We designed, optimized, and extensively tested several sensitive and specific real-time PCR assays for rapid detection of both smallpox and pan-orthopox virus DNAs. The assays are based on TaqMan 3'-minor groove binder chemistry and were performed on both the rapid-cycling Roche LightCycler and the Cepheid Smart Cycler platforms. The hemagglutinin (HA) J7R, B9R, and B10R genes were used as targets for the variola virus-specific assays, and the HA and DNA polymerase-E9L genes were used as targets for the pan-orthopox virus assays. The five orthopox virus assays were tested against a panel of orthopox virus DNAs (both genomic and cloned) at the U.S. Army Medical Research Institute of Infectious Diseases (USAMRIID). The results indicated that each assay was capable of detecting both the appropriate cloned gene and genomic DNA. The assays showed no cross-reactivity to the 78 DNAs in the USAMRIID bacterial cross-reactivity panel. The limit of detection (LOD) of each assay was determined to be between 12 and 25 copies of target DNA. The assays were also run against a blind panel of DNAs at the Centers for Disease Control and Prevention (CDC) on both the LightCycler and the Smart Cycler. The panel consisted of eight different variola virus isolates, five non-variola virus orthopox virus isolates, two varicella-zoster virus isolates, and one herpes simplex virus isolate. Each sample was tested in triplicate at 2.5 ng, 25 pg, 250 fg, and 2.5 fg, which represent 1.24 x 10(7), 1.24 x 10(5), 1.24 x 10(3), and 1.24 x 10(1) genome equivalents, respectively. The results indicated that each of the five assays was 100% specific (no false positives) when tested against both the USAMRIID panels and the CDC blind panel. With the CDC blind panel, the LightCycler was capable of detecting 96.2% of the orthopox virus DNAs and 93.8% of the variola virus DNAs. The Smart Cycler was capable of detecting 92.3% of the orthopox virus DNAs and between 75 and 93.8% of the variola virus DNAs. However, all five assays had nearly 100% sensitivity on both machines with samples above the LOD (>12 gene copies). These real-time PCR assays represent a battery of tests to screen for and confirm the presence of variola virus DNA. The early detection of a smallpox outbreak is crucial whether the incident is an act of bioterrorism or an accidental occurrence.

Extensive survey of 12 X-STRs reveals genetic heterogeneity among Brazilian populations.

PubMed

Ribeiro-Rodrigues, Elzemar Martins; Palha, Teresinha de Jesus Brabo Ferreira; Bittencourt, Eloisa Auler; Ribeiro-Dos-Santos, Andrea; Santos, Sidney

2011-05-01

The admixed Brazilian population shows high levels of genetic variability, which resulted from the contribution of three main ethnicities, Amerindian, European, and African. However, due to its huge territory, admixing has been asymmetrical, i.e., the relative contribution from each ethnicity has been unequal in the five geopolitical regions of the country. The aim of this study was to describe genetic variability using a panel of short-tandem repeats on the X chromosome (X-STR) in order to perform a comprehensive evaluation of the usefulness of such markers for forensic purposes in Brazil. Twelve X-STR (DXS9895, DXS7132, DXS6800, DXS9898, DXS6789, DXS7133, GATA172D05, DXS7130, HPRTB, GATA31E08, DXS7423, and DXS10011) were chosen and tested in a sample of 2,234 individuals belonging to 16 out of the 27 Brazilian States, representing all of its five geopolitical regions. No markers showed significant deviation from the Hardy-Weinberg equilibrium, even when analyses were partitioned to represent geopolitical regions. Genetic diversity per locus ranged from 67% (DSX7133) to 95% (DXS10011), and the State of Ceará showed the highest average genetic diversity (79% for all 12 X-STR markers). Considering the Brazilian population as a whole, the power of discrimination of the 12 X-STR panel in females (PDF) was 0.999999999999994, while the power of discrimination in males (PDM) was 0.9999999969. Such high values suggest the potential of that panel to be used in forensic applications and relatedness tests among individuals. Comparisons among the Brazilian populations investigated revealed significant differences when they were compared among each other, a pattern that was maintained when additional populations from Europe and Latin America were compared to Brazilians. Our results highlight the need and usefulness of specific genetic database for forensic purposes in Brazilian populations.

Cystic fibrosis carrier screening in a North American population.

PubMed

Zvereff, Val V; Faruki, Hawazin; Edwards, Marcia; Friedman, Kenneth J

2014-07-01

The aim of this study was to compare the mutation frequency distribution for a 32-mutation panel and a 69-mutation panel used for cystic fibrosis carrier screening. Further aims of the study were to examine the race-specific detection rates provided by both panels and to assess the performance of extended panels in large-scale, population-based cystic fibrosis carrier screening. Although genetic screening for the most common CFTR mutations allows detection of nearly 90% of cystic fibrosis carriers, the large number of other mutations, and their distribution within different ethnic groups, limits the utility of general population screening. Patients referred for cystic fibrosis screening from January 2005 through December 2010 were tested using either a 32-mutation panel (n = 1,601,308 individuals) or a 69-mutation panel (n = 109,830). The carrier frequencies observed for the 69-mutation panel study population (1/36) and Caucasian (1/27) and African-American individuals (1/79) agree well with published cystic fibrosis carrier frequencies; however, a higher carrier frequency was observed for Hispanic-American individuals (1/48) using the 69-mutation panel as compared with the 32-mutation panel (1/69). The 69-mutation panel detected ~20% more mutations than the 32-mutation panel for both African-American and Hispanic-American individuals. Expanded panels using race-specific variants can improve cystic fibrosis carrier detection rates within specific populations. However, it is important that the pathogenicity and the relative frequency of these variants are confirmed.

Safety of ingredients used in cosmetics.

PubMed

Bergfeld, Wilma F; Belsito, Donald V; Marks, James G; Andersen, F Alan

2005-01-01

The Cosmetic Ingredient Review (CIR) program was established in 1976 by the Cosmetics, Toiletry, and Fragrance Association, with the support of the Food and Drug Administration (FDA) and the Consumer Federation of America (CFA). CIR performs independent, expert reviews to determine if ingredients used in cosmetics are safe. CIR staff prepares summaries of available data and the CIR Expert Panel reviews the data in open, public meetings. If more data are needed, requests are made. Unpublished studies may be provided, but become public and available for review once summarized in CIR safety assessments. Tentative conclusions are supported with a rationale and public comment is sought. Taking any input into consideration, a final safety assessment monograph is issued. These monographs are submitted for publication in the peer-reviewed International Journal of Toxicology . To date, 1194 individual cosmetic ingredients have been addressed. Of these, 683 were found to be safe in cosmetics in the present practices of use and concentration. With qualifications, another 388 have been found safe for use in cosmetics; specific qualifications for each are given. Nine ingredients have been deemed unsafe for use in cosmetics and the safety issue has been described. The available data were found insufficient to support the safety of 114 ingredients; the needed data are listed. Hair dyes represent an important product category reviewed by CIR. In considering hair dyes, the CIR Expert Panel reviews experimental and clinical data specific to the particular chemical structure of each hair dye and reviews epidemiologic studies that address hair dye use that are less specific. Recently the CIR Expert Panel concluded that the available epidemiologic studies are insufficient to conclude there is a causal relationship between hair dye use and cancer and other end points. It is inevitable that new information will become available concerning ingredients for which safety assessments were completed in the early days of the program. To consider new data, the CIR Expert Panel has instituted a re-review program. Sodium lauryl sulfate (SLS), formaldehyde, and parabens are discussed as examples. Safety assessments currently underway are listed, along with high-priority ingredients from which new work will be chosen. Although supported by the cosmetics industry, the CIR program has remained independent in its decision making, based on its open, public process; the integrity of the expert panel members; the participation of the FDA and the CFA; and the cooperation of the cosmetics industry.

Analytical and experimental investigation of aircraft metal structures reinforced with filamentary composites. Phase 3: Major component development

NASA Technical Reports Server (NTRS)

Bryson, L. L.; Mccarty, J. E.

1973-01-01

Analytical and experimental investigations, performed to establish the feasibility of reinforcing metal aircraft structures with advanced filamentary composites, are reported. Aluminum-boron-epoxy and titanium-boron-epoxy were used in the design and manufacture of three major structural components. The components were representative of subsonic aircraft fuselage and window belt panels and supersonic aircraft compression panels. Both unidirectional and multidirectional reinforcement concepts were employed. Blade penetration, axial compression, and inplane shear tests were conducted. Composite reinforced structural components designed to realistic airframe structural criteria demonstrated the potential for significant weight savings while maintaining strength, stability, and damage containment properties of all metal components designed to meet the same criteria.

Korzun after EVA 1 completed

NASA Image and Video Library

2002-08-14

ISS005-E-09725 (14 August 2002) --- Cosmonaut Valery G. Korzun, Expedition Five mission commander, attired in his thermal undergarment prior to donning a Russian Orlan spacesuit, prepares for an upcoming session of extravehicular activity (EVA) from the Pirs docking compartment on the International Space Station (ISS). The spacewalk is scheduled for August 16, 2002, which will be the 42nd spacewalk at the station and the 17th based out of the station. Korzun and astronaut Peggy A. Whitson, flight engineer, will install six debris panels on the Zvezda Service Module. The panels are designed to shield Zvezda from potential space debris impacts. Korzun, who represents Rosaviakosmos, is also scheduled for a spacewalk on August 22, 2002.

Ultrasonic Spectroscopy of Stainless Steel Sandwich Panels

NASA Technical Reports Server (NTRS)

Cosgriff, Laura M.; Lerch, Bradley A.; Hebsur, Mohan G.; Baaklini, George Y.; Ghosn, Louis J.

2003-01-01

Enhanced, lightweight material systems, such as 17-4PH stainless steel sandwich panels are being developed for use as fan blades and fan containment material systems for next generation engines. In order to improve the production for these systems, nondestructive evaluation (NDE) techniques, such as ultrasonic spectroscopy, are being utilized to evaluate the brazing quality between the 17-4PH stainless steel face plates and the 17-4PH stainless steel foam core. Based on NDE data, shear tests are performed on sections representing various levels of brazing quality from an initial batch of these sandwich structures. Metallographic characterization of brazing is done to corroborate NDE findings and the observed shear failure mechanisms.

User manual for SPLASH (Single Panel Lamp and Shroud Helper).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larsen, Marvin Elwood

2006-02-01

The radiant heat test facility develops test sets providing well-characterized thermal environments, often representing fires. Many of the components and procedures have become standardized to such an extent that the development of a specialized design tool to determine optimal configurations for radiant heat experiments was appropriate. SPLASH (Single Panel Lamp and Shroud Helper) is that tool. SPLASH is implemented as a user-friendly, Windows-based program that allows a designer to describe a test setup in terms of parameters such as number of lamps, power, position, and separation distance. This document is a user manual for that software. Any incidental descriptions ofmore » theory are only for the purpose of defining the model inputs. The theory for the underlying model is described in SAND2005-2947 (Ref. [1]). SPLASH provides a graphical user interface to define lamp panel and shroud designs parametrically, solves the resulting radiation enclosure problem for up to 2500 surfaces, and provides post-processing to facilitate understanding and documentation of analyzed designs.« less

Multi-Material Front Contact for 19% Thin Film Solar Cells.

PubMed

van Deelen, Joop; Tezsevin, Yasemin; Barink, Marco

2016-02-06

The trade-off between transmittance and conductivity of the front contact material poses a bottleneck for thin film solar panels. Normally, the front contact material is a metal oxide and the optimal cell configuration and panel efficiency were determined for various band gap materials, representing Cu(In,Ga)Se₂ (CIGS), CdTe and high band gap perovskites. Supplementing the metal oxide with a metallic copper grid improves the performance of the front contact and aims to increase the efficiency. Various front contact designs with and without a metallic finger grid were calculated with a variation of the transparent conductive oxide (TCO) sheet resistance, scribing area, cell length, and finger dimensions. In addition, the contact resistance and illumination power were also assessed and the optimal thin film solar panel design was determined. Adding a metallic finger grid on a TCO gives a higher solar cell efficiency and this also enables longer cell lengths. However, contact resistance between the metal and the TCO material can reduce the efficiency benefit somewhat.

Emissive flat panel displays: A challenge to the AMLCD

NASA Astrophysics Data System (ADS)

Walko, R. J.

According to some sources, flat panel displays (FPD's) for computers will represent a 20-40 billion dollar industry by the end of the decade and could leverage up to 100-200 billion dollars in computer sales. Control of the flat panel display industry could be a significant factor in the global economy if FPD's manage to tap into the enormous audio/visual consumer market. Japan presently leads the world in active matrix liquid crystal display (AMLCD) manufacturing, the current leading FPD technology. The AMLCD is basically a light shutter which does not emit light on its own, but modulates the intensity of a separate backlight. However, other technologies, based on light emitting phosphors, could eventually challenge the AMLCD's lead position. These light-emissive technologies do not have the size, temperature and viewing angle limitations of AMLCD's. In addition, they could also be less expensive to manufacture, and require a smaller capital outlay for a manufacturing plant. An overview of these alternative technologies is presented.

NIH State-of-the-Science Conference Statement: Role of active surveillance in the management of men with localized prostate cancer.

PubMed

Ganz, Patricia A; Barry, John M; Burke, Wylie; Col, Nananda F; Corso, Phaedra S; Dodson, Everett; Hammond, M Elizabeth; Kogan, Barry A; Lynch, Charles F; Newcomer, Lee; Seifter, Eric J; Tooze, Janet A; Viswanath, Kasisomayajula Vish; Wessells, Hunter

To provide healthcare providers, patients, and the general public with a responsible assessment of currently available data on the use of active surveillance and other observational management strategies for low-grade, localized prostate cancer. A non-U.S. Department of Health and Human Services, nonadvocate 14-member panel representing the fields of cancer prevention and control, urology, pathology, epidemiology, genetics, transplantation, bioethics, economics, health services research, shared decisionmaking, health communication, and community engagement. In addition, 22 experts from pertinent fields presented data to the panel and conference audience. Presentations by experts and a systematic review of the literature prepared by the Tufts Evidence-based Practice Center, through the Agency for Healthcare Research and Quality (AHRQ). Scientific evidence was given precedence over anecdotal experience. The panel drafted its statement based on scientific evidence presented in open forum and on published scientific literature. The draft statement was presented on the final day of the conference and circulated to the audience for comment. The panel released a revised statement later that day at http://consensus.nih.gov. This statement is an independent report of the panel and is not a policy statement of the NIH or the Federal Government. Prostate cancer screening with prostate-specific antigen (PSA) testing has identified many men with low-risk disease. Because of the very favorable prognosis of low-risk prostate cancer, strong consideration should be given to modifying the anxiety-provoking term "cancer" for this condition. Treatment of low-risk prostate cancer patients with radical prostatectomy or radiation therapy leads to side effects such as impotence and incontinence in a substantial number. Active surveillance has emerged as a viable option that should be offered to patients with low-risk prostate cancer. More than 100,000 men a year diagnosed with prostate cancer in the United States are candidates for this approach. However, there are many unanswered questions about active surveillance strategies and prostate cancer that require further research and clarification. These include: • Improvements in the accuracy and consistency of pathologic diagnosis of prostate cancer • Consensus on which men are the most appropriate candidates for active surveillance • The optimal protocol for active surveillance and the potential for individualizing the approach based on clinical and patient factors • Optimal ways to communicate the option of active surveillance to patients • Methods to assist patient decisionmaking • Reasons for acceptance or rejection of active surveillance as a treatment strategy • Short- and long-term outcomes of active surveillance. Well-designed studies to address these questions and others raised in this statement represent an important health research priority. Qualitative, observational, and interventional research designs are needed. Due to the paucity of evidence about this important public health problem, all patients being considered for active surveillance should be offered participation in multicenter research studies that incorporate community settings and partners.

Experimental Study of the Bending Properties and Deformation Analysis of Web-Reinforced Composite Sandwich Floor Slabs with Four Simply Supported Edges.

PubMed

Qi, Yujun; Fang, Hai; Liu, Weiqing

2016-01-01

Web-reinforced composite sandwich panels exhibit good mechanical properties in one-way bending, but few studies have investigated their flexural behavior and deformation calculation methods under conditions of four simply supported edges. This paper studies the bending performance of and deformation calculation methods for two-way web-reinforced composite sandwich panels with different web spacing and heights. Polyurethane foam, two-way orthogonal glass-fiber woven cloth and unsaturated resin were used as raw materials in this study. Vacuum infusion molding was used to prepare an ordinary composite sandwich panel and 5 web-reinforced composite sandwich panels with different spacing and web heights. The panels were subjected to two-way panel bending tests with simple support for all four edges. The mechanical properties of these sandwich panels during the elastic stage were determined by applying uniformly distributed loads. The non-linear mechanical characteristics and failure modes were obtained under centrally concentrated loading. Finally, simulations of the sandwich panels, which used the mechanical model established herein, were used to deduce the formulae for the deflection deformation for this type of sandwich panel. The experimental results show that webs can significantly improve the limit bearing capacity and flexural rigidity of sandwich panels, with smaller web spacing producing a stronger effect. When the web spacing is 75 mm, the limit bearing capacity is 4.63 times that of an ordinary sandwich panel. The deduced deflection calculation formulae provide values that agree well with the measurements (maximum error <15%). The results that are obtained herein can provide a foundation for the structural design of this type of panel.

Experimental Study of the Bending Properties and Deformation Analysis of Web-Reinforced Composite Sandwich Floor Slabs with Four Simply Supported Edges

PubMed Central

Qi, Yujun; Fang, Hai; Liu, Weiqing

2016-01-01

Web-reinforced composite sandwich panels exhibit good mechanical properties in one-way bending, but few studies have investigated their flexural behavior and deformation calculation methods under conditions of four simply supported edges. This paper studies the bending performance of and deformation calculation methods for two-way web-reinforced composite sandwich panels with different web spacing and heights. Polyurethane foam, two-way orthogonal glass-fiber woven cloth and unsaturated resin were used as raw materials in this study. Vacuum infusion molding was used to prepare an ordinary composite sandwich panel and 5 web-reinforced composite sandwich panels with different spacing and web heights. The panels were subjected to two-way panel bending tests with simple support for all four edges. The mechanical properties of these sandwich panels during the elastic stage were determined by applying uniformly distributed loads. The non-linear mechanical characteristics and failure modes were obtained under centrally concentrated loading. Finally, simulations of the sandwich panels, which used the mechanical model established herein, were used to deduce the formulae for the deflection deformation for this type of sandwich panel. The experimental results show that webs can significantly improve the limit bearing capacity and flexural rigidity of sandwich panels, with smaller web spacing producing a stronger effect. When the web spacing is 75 mm, the limit bearing capacity is 4.63 times that of an ordinary sandwich panel. The deduced deflection calculation formulae provide values that agree well with the measurements (maximum error <15%). The results that are obtained herein can provide a foundation for the structural design of this type of panel. PMID:26871435

Genomic Sequencing Procedure Microcosting Analysis and Health Economic Cost-Impact Analysis: A Report of the Association for Molecular Pathology.

PubMed

Sabatini, Linda M; Mathews, Charles; Ptak, Devon; Doshi, Shivang; Tynan, Katherine; Hegde, Madhuri R; Burke, Tara L; Bossler, Aaron D

2016-05-01

The increasing use of advanced nucleic acid sequencing technologies for clinical diagnostics and therapeutics has made vital understanding the costs of performing these procedures and their value to patients, providers, and payers. The Association for Molecular Pathology invested in a cost and value analysis of specific genomic sequencing procedures (GSPs) newly coded by the American Medical Association Current Procedural Terminology Editorial Panel. Cost data and work effort, including the development and use of data analysis pipelines, were gathered from representative laboratories currently performing these GSPs. Results were aggregated to generate representative cost ranges given the complexity and variability of performing the tests. Cost-impact models for three clinical scenarios were generated with assistance from key opinion leaders: impact of using a targeted gene panel in optimizing care for patients with advanced non-small-cell lung cancer, use of a targeted gene panel in the diagnosis and management of patients with sensorineural hearing loss, and exome sequencing in the diagnosis and management of children with neurodevelopmental disorders of unknown genetic etiology. Each model demonstrated value by either reducing health care costs or identifying appropriate care pathways. The templates generated will aid laboratories in assessing their individual costs, considering the value structure in their own patient populations, and contributing their data to the ongoing dialogue regarding the impact of GSPs on improving patient care. Copyright © 2016 American Society for Investigative Pathology and the Association for Molecular Pathology. Published by Elsevier Inc. All rights reserved.

Public preferences for vaccination programmes during pandemics caused by pathogens transmitted through respiratory droplets - a discrete choice experiment in four European countries, 2013.

PubMed

Determann, Domino; Korfage, Ida J; Fagerlin, Angela; Steyerberg, Ewout W; Bliemer, Michiel C; Voeten, Helene A; Richardus, Jan Hendrik; Lambooij, Mattijs S; de Bekker-Grob, Esther W

2016-06-02

This study aims to quantify and compare preferences of citizens from different European countries for vaccination programme characteristics during pandemics, caused by pathogens which are transmitted through respiratory droplets. Internet panel members, nationally representative based on age, sex, educational level and region, of four European Union Member States (Netherlands, Poland, Spain, and Sweden, n = 2,068) completed an online discrete choice experiment. These countries, from different geographical areas of Europe, were chosen because of the availability of high-quality Internet panels and because of the cooperation between members of the project entitled Effective Communication in Outbreak Management: development of an evidence-based tool for Europe (ECOM). Data were analysed using panel latent class regression models. In the case of a severe pandemic scenario, vaccine effectiveness was the most important characteristic determining vaccination preference in all countries, followed by the body that advises on vaccination. In Sweden, the advice of family and/or friends and the advice of physicians strongly affected vaccine preferences, in contrast to Poland and Spain, where the advice of (international) health authorities was more decisive. Irrespective of pandemic scenario or vaccination programme characteristics, the predicted vaccination uptakes were lowest in Sweden, and highest in Poland. To increase vaccination uptake during future pandemics, the responsible authorities should align with other important stakeholders in the country and communicate in a coordinated manner.