Neurology education: current and emerging concepts in residency and fellowship training.

PubMed

Stern, Barney J; Józefowicz, Ralph F; Kissela, Brett; Lewis, Steven L

2010-05-01

This article discusses the current and future state of neurology training. A priority is to attract sufficient numbers of qualified candidates for the existing residency programs. A majority of neurology residents elects additional training in a neurologic subspecialty, and programs will have to be accredited accordingly. Attempts are being made to standardize and strengthen the existing general residency and subspecialty programs through cooperative efforts. Ultimately, residency programs must comply with the increasing requirements and try to adapt these requirements to the unique demands and realities of neurology training. An effort is underway to establish consistent competency-testing methods. Copyright 2010 Elsevier Inc. All rights reserved.

Air Force construction automation/robotics

NASA Technical Reports Server (NTRS)

Nease, AL; Dusseault, Christopher

1994-01-01

The Air Force has several unique requirements that are being met through the development of construction robotic technology. The missions associated with these requirements place construction/repair equipment operators in potentially harmful situations. Additionally, force reductions require that human resources be leveraged to the maximum extent possible and that more stringent construction repair requirements push for increased automation. To solve these problems, the U.S. Air Force is undertaking a research and development effort at Tyndall AFB, FL to develop robotic teleoperation, telerobotics, robotic vehicle communications, automated damage assessment, vehicle navigation, mission/vehicle task control architecture, and associated computing environment. The ultimate goal is the fielding of robotic repair capability operating at the level of supervised autonomy. The authors of this paper will discuss current and planned efforts in construction/repair, explosive ordnance disposal, hazardous waste cleanup, fire fighting, and space construction.

Robotic tape library system level testing at NSA: Present and planned

NASA Technical Reports Server (NTRS)

Shields, Michael F.

1994-01-01

In the present of declining Defense budgets, increased pressure has been placed on the DOD to utilize Commercial Off the Shelf (COTS) solutions to incrementally solve a wide variety of our computer processing requirements. With the rapid growth in processing power, significant expansion of high performance networking, and the increased complexity of applications data sets, the requirement for high performance, large capacity, reliable and secure, and most of all affordable robotic tape storage libraries has greatly increased. Additionally, the migration to a heterogeneous, distributed computing environment has further complicated the problem. With today's open system compute servers approaching yesterday's supercomputer capabilities, the need for affordable, reliable secure Mass Storage Systems (MSS) has taken on an ever increasing importance to our processing center's ability to satisfy operational mission requirements. To that end, NSA has established an in-house capability to acquire, test, and evaluate COTS products. Its goal is to qualify a set of COTS MSS libraries, thereby achieving a modicum of standardization for robotic tape libraries which can satisfy our low, medium, and high performance file and volume serving requirements. In addition, NSA has established relations with other Government Agencies to complete this in-house effort and to maximize our research, testing, and evaluation work. While the preponderance of the effort is focused at the high end of the storage ladder, considerable effort will be extended this year and next at the server class or mid range storage systems.

Air Force construction automation/robotics

NASA Technical Reports Server (NTRS)

Nease, A. D.; Alexander, E. F.

1993-01-01

The Air Force has several missions which generate unique requirements that are being met through the development of construction robotic technology. One especially important mission will be the conduct of Department of Defense (DOD) space activities. Space operations and other missions place construction/repair equipment operators in dangerous environments and potentially harmful situations. Additionally, force reductions require that human resources be leveraged to the maximum extent possible, and more stringent construction repair requirements push for increased automation. To solve these problems, the U.S. Air Force is undertaking a research and development effort at Tyndall AFB, FL, to develop robotic construction/repair equipment. This development effort involves the following technologies: teleoperation, telerobotics, construction operations (excavation, grading, leveling, tool change), robotic vehicle communications, vehicle navigation, mission/vehicle task control architecture, and associated computing environment. The ultimate goal is the fielding of a robotic repair capability operating at the level of supervised autonomy. This paper will discuss current and planned efforts in space construction/repair, explosive ordnance disposal, hazardous waste cleanup, and fire fighting.

The analysis of the statistical and historical information gathered during the development of the Shuttle Orbiter Primary Flight Software

NASA Technical Reports Server (NTRS)

Simmons, D. B.; Marchbanks, M. P., Jr.; Quick, M. J.

1982-01-01

The results of an effort to thoroughly and objectively analyze the statistical and historical information gathered during the development of the Shuttle Orbiter Primary Flight Software are given. The particular areas of interest include cost of the software, reliability of the software, requirements for the software and how the requirements changed during development of the system. Data related to the current version of the software system produced some interesting results. Suggestions are made for the saving of additional data which will allow additional investigation.

Using a Balance Scorecard Approach to Evaluate the Value of Service Learning Projects in Online Courses

ERIC Educational Resources Information Center

Schwieger, Dana

2015-01-01

Service learning projects serve as a valuable tool for applying course concepts in a way to benefit both the students and community. However, they often require a significant amount of additional effort beyond that required of assigning conventional homework problems. When the projects take place in an online course setting, the level of…

76 FR 9329 - Efficiency Initiative Effort To Reduce Non-Value-Added Costs Imposed on Industry by Department of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-17

..., backed by specific, credible, convincing data. DoD's goal is to develop a fact-based program to reform... changes that can only be made over the longer term or require additional follow-up data before they are... data that it needs along with information about some additional areas of non-value- added cost...

Analysis of patients' willingness to be mobile, taking into account individual characteristics and two exemplary indications.

PubMed

Augustin, Jobst; Schäfer, Ines; Augustin, Matthias; Zander, Nicole

2017-04-01

With respect to health care planning, it is commonly assumed that patients consult the nearest physician. In reality, however, patients frequently accept great-er efforts/expenses than necessary to see a physician. The objective of the present study was to determine under which circumstances patients were willing to accept additional efforts/expenses, and which role sociodemographic and clinical characteristics play in this regard. Data collection was carried out in the context of a multicenter cross-sectional study among office-based and hospital-affiliated (University Medical Center Hamburg-Eppendorf) dermatologists. Patients (n = 309) with psoriasis and chronic wounds were surveyed about their mobility patterns and disease severity. Data analysis was performed using descriptive and multivariate methods. The willingness to accept additional efforts/expenses is primarily determined by a physician's expertise and service portfolio. Comparing both diagnoses showed that psoriasis patients usually traveled longer distances than wound patients. Among psoriasis patients, one significant predictor for accepting additional efforts/expenses was the level of education. With regard to wound patients, key factors included wound size (severity). The present study revealed complex mobility patterns among patients, which are affected by numerous personal as well as clinical factors. Depending on the diagnosis and individual preferences, additional efforts/expenses can - among other things - be explained by disease severity. Further studies are required to obtain more conclusive data. © 2017 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

Engineering and fabrication cost considerations for cryogenic wind tunnel models

NASA Technical Reports Server (NTRS)

Boykin, R. M., Jr.; Davenport, J. B., Jr.

1983-01-01

Design and fabrication cost drivers for cryogenic transonic wind tunnel models are defined. The major cost factors for wind tunnel models are model complexity, tolerances, surface finishes, materials, material validation, and model inspection. The cryogenic temperatures require the use of materials with relatively high fracture toughness but at the same time high strength. Some of these materials are very difficult to machine, requiring extensive machine hours which can add significantly to the manufacturing costs. Some additional engineering costs are incurred to certify the materials through mechanical tests and nondestructive evaluation techniques, which are not normally required with conventional models. When instrumentation such as accelerometers and electronically scanned pressure modules is required, temperature control of these devices needs to be incorporated into the design, which requires added effort. Additional thermal analyses and subsystem tests may be necessary, which also adds to the design costs. The largest driver to the design costs is potentially the additional static and dynamic analyses required to insure structural integrity of the model and support system.

The role of cognitive effort in subjective reward devaluation and risky decision-making.

PubMed

Apps, Matthew A J; Grima, Laura L; Manohar, Sanjay; Husain, Masud

2015-11-20

Motivation is underpinned by cost-benefit valuations where costs-such as physical effort or outcome risk-are subjectively weighed against available rewards. However, in many environments risks pertain not to the variance of outcomes, but to variance in the possible levels of effort required to obtain rewards (effort risks). Moreover, motivation is often guided by the extent to which cognitive-not physical-effort devalues rewards (effort discounting). Yet, very little is known about the mechanisms that underpin the influence of cognitive effort risks or discounting on motivation. We used two cost-benefit decision-making tasks to probe subjective sensitivity to cognitive effort (number of shifts of spatial attention) and to effort risks. Our results show that shifts of spatial attention when monitoring rapidly presented visual stimuli are perceived as effortful and devalue rewards. Additionally, most people are risk-averse, preferring safe, known amounts of effort over risky offers. However, there was no correlation between their effort and risk sensitivity. We show for the first time that people are averse to variance in the possible amount of cognitive effort to be exerted. These results suggest that cognitive effort sensitivity and risk sensitivity are underpinned by distinct psychological and neurobiological mechanisms.

Hands-Free, Heads-Up Control System for Unmanned Ground Vehicles

DTIC Science & Technology

2011-08-10

interface evaluation Industry evaluated two commercial-off-the-shelf (COTS) brain computer interfaces from two companies – Neurosky and Emotiv ...useless, resulting in very low command recognition accuracy. In addition, latency issues plagued the system. Figure 6 Emotiv Headset The... Emotiv system, unlike the Neurosky, required great effort to use and calibrate. It requires 16 foam tips to be wet with saline solution and then

Significant Revisions to OSHA 29 CFR 1910.269.

PubMed

Neitzel, Dennis K

2015-06-01

The updated OSHA 29 CFR 1910.269 requirements are significant for assisting employers in their efforts to protect their employees from electrical hazards. In addition, OSHA based these revisions on the latest consensus standards and improvements in electrical safety technology. Together, the updated regulation creates a unified and up-to-date set of requirements to help employers more effectively establish safe work practices to protect their workers.

Vector vaccines for control of avian influenza

USDA-ARS?s Scientific Manuscript database

Vaccines play a critical role in the poultry industries efforts at disease control and prevention. However, providing safe, efficacious, and cost-effective vaccines remains a constant issue to the industry. In addition, many viruses undergo mutation in the field requiring vaccine adjustments. Recent...

42 CFR 34.3 - Scope of examinations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... outbreak investigations and response efforts; effectiveness of containment and control measures; and the... all applicable additional requirements for medical screening and testing, and will post these at the...) Risk-based approach. (1) HHS/CDC will use the medical and epidemiological factors listed in paragraph...

42 CFR 34.3 - Scope of examinations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... outbreak investigations and response efforts; effectiveness of containment and control measures; and the... all applicable additional requirements for medical screening and testing, and will post these at the...) Risk-based approach. (1) HHS/CDC will use the medical and epidemiological factors listed in paragraph...

42 CFR 34.3 - Scope of examinations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... outbreak investigations and response efforts; effectiveness of containment and control measures; and the... all applicable additional requirements for medical screening and testing, and will post these at the...) Risk-based approach. (1) HHS/CDC will use the medical and epidemiological factors listed in paragraph...

42 CFR 34.3 - Scope of examinations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... outbreak investigations and response efforts; effectiveness of containment and control measures; and the... all applicable additional requirements for medical screening and testing, and will post these at the...) Risk-based approach. (1) HHS/CDC will use the medical and epidemiological factors listed in paragraph...

42 CFR 34.3 - Scope of examinations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... outbreak investigations and response efforts; effectiveness of containment and control measures; and the... all applicable additional requirements for medical screening and testing, and will post these at the...) Risk-based approach. (1) HHS/CDC will use the medical and epidemiological factors listed in paragraph...

Development of microsatellite markers in Parthenium ssp.

USDA-ARS?s Scientific Manuscript database

Molecular markers provide the most efficient means to study genetic diversity within and among species of a particular genus. In addition, molecular markers can facilitate breeding efforts by providing tools necessary to reduce the time required to obtain recombinant genotypes with improved agricu...

34 CFR 385.45 - What additional application requirements apply to the training of individuals for rehabilitation...

Code of Federal Regulations, 2014 CFR

2014-07-01

... diverse populations of the United States, as part of the effort to increase the number of individuals with... services. (Approved by the Office of Management and Budget under control number 1820-0018) (Authority: Secs...

34 CFR 385.45 - What additional application requirements apply to the training of individuals for rehabilitation...

Code of Federal Regulations, 2010 CFR

2010-07-01

... diverse populations of the United States, as part of the effort to increase the number of individuals with... services. (Approved by the Office of Management and Budget under control number 1820-0018) (Authority: Secs...

34 CFR 385.45 - What additional application requirements apply to the training of individuals for rehabilitation...

Code of Federal Regulations, 2012 CFR

2012-07-01

... diverse populations of the United States, as part of the effort to increase the number of individuals with... services. (Approved by the Office of Management and Budget under control number 1820-0018) (Authority: Secs...

34 CFR 385.45 - What additional application requirements apply to the training of individuals for rehabilitation...

Code of Federal Regulations, 2011 CFR

2011-07-01

... diverse populations of the United States, as part of the effort to increase the number of individuals with... services. (Approved by the Office of Management and Budget under control number 1820-0018) (Authority: Secs...

34 CFR 385.45 - What additional application requirements apply to the training of individuals for rehabilitation...

Code of Federal Regulations, 2013 CFR

2013-07-01

... diverse populations of the United States, as part of the effort to increase the number of individuals with... services. (Approved by the Office of Management and Budget under control number 1820-0018) (Authority: Secs...

15 CFR 291.4 - National industry-specific pollution prevention and environmental compliance resource centers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION PARTNERSHIP; ENVIRONMENTAL PROJECTS... information, NIST manufacturing extension efforts, EPA regulation and guidance, and state requirements. The... addition, consultants providing services to those businesses, the NIST Manufacturing Extension Centers, and...

15 CFR 291.4 - National industry-specific pollution prevention and environmental compliance resource centers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION PARTNERSHIP; ENVIRONMENTAL PROJECTS... information, NIST manufacturing extension efforts, EPA regulation and guidance, and state requirements. The... addition, consultants providing services to those businesses, the NIST Manufacturing Extension Centers, and...

15 CFR 291.4 - National industry-specific pollution prevention and environmental compliance resource centers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION PARTNERSHIP; ENVIRONMENTAL PROJECTS... information, NIST manufacturing extension efforts, EPA regulation and guidance, and state requirements. The... addition, consultants providing services to those businesses, the NIST Manufacturing Extension Centers, and...

6 CFR 17.310 - Recruitment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Recruitment. 17.310 Section 17.310 Domestic... in Admission and Recruitment Prohibited § 17.310 Recruitment. (a) Nondiscriminatory recruitment. A... recruitment and admission of students. A recipient may be required to undertake additional recruitment efforts...

14 CFR 1253.310 - Recruitment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Recruitment. 1253.310 Section 1253.310... in Admission and Recruitment Prohibited § 1253.310 Recruitment. (a) Nondiscriminatory recruitment. A... recruitment and admission of students. A recipient may be required to undertake additional recruitment efforts...

ECLSS medical support activities

NASA Technical Reports Server (NTRS)

Crump, William J.; Kilgore, Melvin V., Jr.

1991-01-01

During the period from April 10, 1990 to April 9, 1991, the Consortium for the Space Life Sciences provided technical assistance to the NASA/MSFC water recovery efforts. This assistance was in the form of literature reviews, technical recommendations, and presentations. This final report summarizes the activities completed during this period and identifies those areas requiring additional efforts. The tasks which the University of Alabama in Huntsville (UAH) water recovery team addressed were either identified by MSFC technical representatives or chosen from those outlined in the subject statement of work.

A Cost Model for Testing Unmanned and Autonomous Systems of Systems

DTIC Science & Technology

2011-02-01

those risks. In addition, the fundamental methods presented by Aranha and Borba to include the complexity and sizing of tests for UASoS, can be expanded...used as an input for test execution effort estimation models (Aranha & Borba , 2007). Such methodology is very relevant to this work because as a UASoS...calculate the test effort based on the complexity of the SoS. However, Aranha and Borba define test size as the number of steps required to complete

Development of Oxidation Resistant Coatings on GRCop-84 Substrates by Cold Spray Process

NASA Technical Reports Server (NTRS)

Karthikeyan, J.

2007-01-01

GRCop-84, a Cu-CR-Nb alloy, has been developed for rocket engine liner applications. For maximum life additional oxidation protection is required to prevent blanching. NiCrAlY was identified as a suitable coating, and efforts were initiated to develop suitable coating techniques. Cold spray is one technique under consideration. Efforts at ASB Industries to produce dense, adherent coatings are detailed. The work culminated in the production of samples for testing at NASA Glenn Research Center.

Definition and Demonstration of a Methodology for Validating Aircraft Trajectory Predictors

NASA Technical Reports Server (NTRS)

Vivona, Robert A.; Paglione, Mike M.; Cate, Karen T.; Enea, Gabriele

2010-01-01

This paper presents a new methodology for validating an aircraft trajectory predictor, inspired by the lessons learned from a number of field trials, flight tests and simulation experiments for the development of trajectory-predictor-based automation. The methodology introduces new techniques and a new multi-staged approach to reduce the effort in identifying and resolving validation failures, avoiding the potentially large costs associated with failures during a single-stage, pass/fail approach. As a case study, the validation effort performed by the Federal Aviation Administration for its En Route Automation Modernization (ERAM) system is analyzed to illustrate the real-world applicability of this methodology. During this validation effort, ERAM initially failed to achieve six of its eight requirements associated with trajectory prediction and conflict probe. The ERAM validation issues have since been addressed, but to illustrate how the methodology could have benefited the FAA effort, additional techniques are presented that could have been used to resolve some of these issues. Using data from the ERAM validation effort, it is demonstrated that these new techniques could have identified trajectory prediction error sources that contributed to several of the unmet ERAM requirements.

Creating an effort tracking tool to improve therapeutic cancer clinical trials workload management and budgeting.

PubMed

James, Pam; Bebee, Patty; Beekman, Linda; Browning, David; Innes, Mathew; Kain, Jeannie; Royce-Westcott, Theresa; Waldinger, Marcy

2011-11-01

Quantifying data management and regulatory workload for clinical research is a difficult task that would benefit from a robust tool to assess and allocate effort. As in most clinical research environments, The University of Michigan Comprehensive Cancer Center (UMCCC) Clinical Trials Office (CTO) struggled to effectively allocate data management and regulatory time with frequently inaccurate estimates of how much time was required to complete the specific tasks performed by each role. In a dynamic clinical research environment in which volume and intensity of work ebbs and flows, determining requisite effort to meet study objectives was challenging. In addition, a data-driven understanding of how much staff time was required to complete a clinical trial was desired to ensure accurate trial budget development and effective cost recovery. Accordingly, the UMCCC CTO developed and implemented a Web-based effort-tracking application with the goal of determining the true costs of data management and regulatory staff effort in clinical trials. This tool was developed, implemented, and refined over a 3-year period. This article describes the process improvement and subsequent leveling of workload within data management and regulatory that enhanced the efficiency of UMCCC's clinical trials operation.

Project Summary Report

NASA Technical Reports Server (NTRS)

Upchurch, Christopher

2011-01-01

The project, being the development of resource management applications, consisted entirely of my own effort. From deliverable requirements provided by my mentor, and some functional requirement additions generated through design reviews, It was my responsibility to implement the requested features as well as possible, given the resources available. For the most part development work consisted of database programming and functional testing using real resource data. Additional projects I worked on included some firing room console training, configuring the new NE-A microcontroller development lab network, mentoring high school CubeSat students, and managing the NE interns' component of the mentor appreciation ceremony.

Physical and cognitive effort discounting across different reward magnitudes: Tests of discounting models

PubMed Central

Ostaszewski, Paweł

2017-01-01

The effort required to obtain a rewarding outcome is an important factor in decision-making. Describing the reward devaluation by increasing effort intensity is substantial to understanding human preferences, because every action and choice that we make is in itself effortful. To investigate how reward valuation is affected by physical and cognitive effort, we compared mathematical discounting functions derived from research on discounting. Seven discounting models were tested across three different reward magnitudes. To test the models, data were collected from a total of 114 participants recruited from the general population. For one-parameter models (hyperbolic, exponential, and parabolic), the data were explained best by the exponential model as given by a percentage of explained variance. However, after introducing an additional parameter, data obtained in the cognitive and physical effort conditions were best described by the power function model. Further analysis, using the second order Akaike and Bayesian Information Criteria, which account for model complexity, allowed us to identify the best model among all tested. We found that the power function best described the data, which corresponds to conventional analyses based on the R2 measure. This supports the conclusion that the function best describing reward devaluation by physical and cognitive effort is a concave one and is different from those that describe delay or probability discounting. In addition, consistent magnitude effects were observed that correspond to those in delay discounting research. PMID:28759631

Pulling Together

ERIC Educational Resources Information Center

Daresh, John; Lynch, Jane

2011-01-01

Schools today require many individuals to work together to attain learning goals since no school functions without broad, active involvement of all community members. In addition, successful school improvement efforts operate well when there is a coherent vision for student achievement. While principals are aware of the need to include disparate…

41 CFR 101-4.310 - Recruitment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Recruitment. 101-4.310... Admission and Recruitment Prohibited § 101-4.310 Recruitment. (a) Nondiscriminatory recruitment. A recipient... recruitment and admission of students. A recipient may be required to undertake additional recruitment efforts...

Risk-based requirements management framework with applications to assurance cases

NASA Astrophysics Data System (ADS)

Feng, D.; Eyster, C.

The current regulatory approach for assuring device safety primarily focuses on compliance with prescriptive safety regulations and relevant safety standards. This approach, however, does not always lead to a safe system design even though safety regulations and standards have been met. In the medical device industry, several high profile recalls involving infusion pumps have prompted the regulatory agency to reconsider how device safety should be managed, reviewed and approved. An assurance case has been cited as a promising tool to address this growing concern. Assurance cases have been used in safety-critical systems for some time. Most assurance cases, if not all, in literature today are developed in an ad hoc fashion, independent from risk management and requirement development. An assurance case is a resource-intensive endeavor that requires additional effort and documentation from equipment manufacturers. Without a well-organized requirements infrastructure in place, such “ additional effort” can be substantial, to the point where the cost of adoption outweighs the benefit of adoption. In this paper, the authors present a Risk-Based Requirements and Assurance Management (RBRAM) methodology. The RBRAM is an elaborate framework that combines Risk-Based Requirements Management (RBRM) with assurance case methods. Such an integrated framework can help manufacturers leverage an existing risk management to present a comprehensive assurance case with minimal additional effort while providing a supplementary means to reexamine the integrity of the system design in terms of the mission objective. Although the example used is from the medical industry, the authors believe that the RBRAM methodology underlines the fundamental principle of risk management, and offers a simple, yet effective framework applicable to aerospace industry, perhaps, to any industry.

Moonshot Science-Risks and Benefits.

PubMed

Casadevall, Arturo; Fang, Ferric C

2016-08-30

Ever since the successful Apollo 11 Moon landing in 1969, a "moonshot" has come to signify a bold effort to achieve a seemingly impossible task. The Obama administration recently called for a moonshot to cure cancer, an initiative that has elicited mixed responses from researchers who welcome additional funding but worry about raising expectations. We suggest that a successful moonshot requires a sufficient understanding of the basic science underlying a problem in question so that efforts can be focused on engineering a solution. Current gaps in our basic knowledge of cancer biology make the cancer moonshot a uniquely challenging endeavor. Nevertheless, history has shown that intensive research efforts have frequently yielded conceptual and technological breakthroughs with unanticipated benefits for society. We expect that this effort will be no different. Copyright © 2016 Casadevall and Fang.

Knowledge management: an application to wildfire prevention planning

Treesearch

Daniel L Schmoldt

1989-01-01

Residential encroachment into wildland areas places an additional burden on fire management activities. Prevention programs, fuel management efforts, and suppression strategies, previously employed in wildland areas, require modification for protection of increased values at risk in this interface area. Knowledge-based computer systems are being investigated as...

Teaching Online: Where Do Faculty Spend Their Time?

ERIC Educational Resources Information Center

Mandernach, B. Jean; Holbeck, Rick

2016-01-01

An understanding of online teaching time requirements provides essential information to inform scheduling, course size and instructor workload; in addition, awareness of the distribution of time across online teaching tasks provides insight to focus faculty efforts and tailor professional development to target instructional needs. The purpose of…

Process analysis of an in store production of knitted clothing

NASA Astrophysics Data System (ADS)

Buecher, D.; Kemper, M.; Schmenk, B.; Gloy, Y.-S.; Gries, T.

2017-10-01

In the textile and clothing industry, global value-added networks are widespread for textile and clothing production. As a result of global networking, the value chain is fragmented and a great deal of effort is required to coordinate the production processes [1]. In addition, the planning effort on the quantity and design of the goods is high and risky. Today the fashion industry is facing an increasing customer demand for individual and customizable products in addition to short delivery times [2]. These challenges are passed down to the textile and clothing industry decreasing batch sizes and production times. Conventional clothing production cannot fulfill those demands especially when combined with more and more individual or customizable designs. Hence new production concepts have to be developed.

Safeguards and Security by Design (SSBD) for Small Modular Reactors (SMRs) through a Common Global Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badwan, Faris M.; Demuth, Scott Francis; Miller, Michael Conrad

Small Modular Reactors (SMR) with power levels significantly less than the currently standard 1000 to 1600-MWe reactors have been proposed as a potential game changer for future nuclear power. SMRs may offer a simpler, more standardized, and safer modular design by using factory built and easily transportable components. Additionally, SMRs may be more easily built and operated in isolated locations, and may require smaller initial capital investment and shorter construction times. Because many SMRs designs are still conceptual and consequently not yet fixed, designers have a unique opportunity to incorporate updated design basis threats, emergency preparedness requirements, and then fullymore » integrate safety, physical security, and safeguards/material control and accounting (MC&A) designs. Integrating safety, physical security, and safeguards is often referred to as integrating the 3Ss, and early consideration of safeguards and security in the design is often referred to as safeguards and security by design (SSBD). This paper describes U.S./Russian collaborative efforts toward developing an internationally accepted common approach for implementing SSBD/3Ss for SMRs based upon domestic requirements, and international guidance and requirements. These collaborative efforts originated with the Nuclear Energy and Nuclear Security working group established under the U.S.-Russia Bilateral Presidential Commission during the 2009 Presidential Summit. Initial efforts have focused on review of U.S. and Russian domestic requirements for Security and MC&A, IAEA guidance for security and MC&A, and IAEA requirements for international safeguards. Additionally, example SMR design features that can enhance proliferation resistance and physical security have been collected from past work and reported here. The development of a U.S./Russian common approach for SSBD/3Ss should aid the designer of SMRs located anywhere in the world. More specifically, the application of this approach may lead to more proliferation resistant and physically secure design features for SMRs.« less

48 CFR 1352.271-72 - Additional Item Requirements (AIR)-growth work

Code of Federal Regulations, 2014 CFR

2014-10-01

... Production Schedule. The ordering of any portion of the AIR quantities does not in itself warrant an extension to the original contract completion date; however, for planning purposes, the Government... cover the entire effort and shall be burdened to include: (1) Direct production labor hour functions...

48 CFR 1352.271-72 - Additional Item Requirements (AIR)-growth work

Code of Federal Regulations, 2013 CFR

2013-10-01

... Production Schedule. The ordering of any portion of the AIR quantities does not in itself warrant an extension to the original contract completion date; however, for planning purposes, the Government... cover the entire effort and shall be burdened to include: (1) Direct production labor hour functions...

48 CFR 1352.271-72 - Additional Item Requirements (AIR)-growth work

Code of Federal Regulations, 2012 CFR

2012-10-01

... Production Schedule. The ordering of any portion of the AIR quantities does not in itself warrant an extension to the original contract completion date; however, for planning purposes, the Government... cover the entire effort and shall be burdened to include: (1) Direct production labor hour functions...

76 FR 18737 - Defense Transportation Regulation, Part IV

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-05

... III business rules include the elimination of the Domestic and International Local Move (dLM and iLM) and Intra-Country Move (iCM) Tender of Service. Requirements for Domestic Local Moves (dLM) can be met...'' and the 400NG solicitation. In addition, Phase III development efforts will incorporate International...

Control of the sea lamprey (Petromyzon marinus) in Lake Superior, 1953-70

USGS Publications Warehouse

Smith, Bernard R.; Tibbles, J. James; Johnson, B.G.H.

1974-01-01

Although sea lamprey control and heavy plantings of hatchery-reared stock had restored lake trout abundance to prelamprey levels in many areas by 1970, the trout had not yet become self-sustaining. Additional effort will be required to further reduce the effects of lamprey predation.

Improved recovery of ammonia from swine manure using gas-permeable membrane technology and aeration

USDA-ARS?s Scientific Manuscript database

Significant efforts are required to abate ammonia emissions from livestock operations. In addition, the costs of fertilizers have rapidly increased in recent years, especially nitrogen fertilizer such as anhydrous ammonia which is made from natural gas. Thus, new technologies for abatement of ammoni...

15 CFR 8a.310 - Recruitment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Recruitment. 8a.310 Section 8a.310... in Admission and Recruitment Prohibited § 8a.310 Recruitment. (a) Nondiscriminatory recruitment. A... recruitment and admission of students. A recipient may be required to undertake additional recruitment efforts...

Sodium and phosphorus-based food additives: persistent but surmountable hurdles in the management of nutrition in chronic kidney disease

PubMed Central

Gutiérrez, Orlando M.

2012-01-01

Sodium and phosphorus-based food additives are among the most commonly consumed nutrients in the world. This is because both have diverse applications in processed food manufacturing, leading to their widespread utilization by the food industry. Since most foods are naturally low in salt, sodium additives almost completely account for the excessive consumption of sodium throughout the world. Similarly, phosphorus additives represent a major and “hidden” phosphorus load in modern diets. These factors pose a major barrier to successfully lowering sodium or phosphorus intake in patients with chronic kidney disease. As such, any serious effort to reduce sodium or phosphorus consumption will require reductions in the use of these additives by the food industry. The current regulatory environment governing the use of food additives does not favor this goal, however, in large part because these additives have historically been classified as generally safe for public consumption. To overcome these barriers, coordinated efforts will be needed to demonstrate that high intakes of these additives are not safe for public consumption and as such, should be subject to greater regulatory scrutiny. PMID:23439374

Sodium- and phosphorus-based food additives: persistent but surmountable hurdles in the management of nutrition in chronic kidney disease.

PubMed

Gutiérrez, Orlando M

2013-03-01

Sodium- and phosphorus-based food additives are among the most commonly consumed nutrients in the world. This is because both have diverse applications in processed food manufacturing, leading to their widespread use by the food industry. Since most foods are naturally low in salt, sodium additives almost completely account for the excessive consumption of sodium throughout the world. Similarly, phosphorus additives represent a major and "hidden" phosphorus load in modern diets. These factors pose a major barrier to successfully lowering sodium or phosphorus intake in patients with CKD. As such, any serious effort to reduce sodium or phosphorus consumption will require reductions in the use of these additives by the food industry. The current regulatory environment governing the use of food additives does not favor this goal, however, in large part because these additives have historically been classified as generally safe for public consumption. To overcome these barriers, coordinated efforts will be needed to demonstrate that high intake of these additives is not safe for public consumption and as such should be subject to greater regulatory scrutiny. Copyright © 2013 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Assessing the Impact of School-Based Health Centers on Academic Achievement and College Preparation Efforts: Using Propensity Score Matching to Assess School-Level Data in California.

PubMed

Bersamin, Melina; Garbers, Samantha; Gaarde, Jenna; Santelli, John

2016-08-01

This study examines the association between school-based health center (SBHC) presence and school-wide measures of academic achievement and college preparation efforts. Publicly available educational and demographic data from 810 California public high schools were linked to a list of schools with an SBHC. Propensity score matching, a method to reduce bias inherent in nonrandomized control studies, was used to select comparison schools. Regression analyses, controlling for proportion of English-language learners, were conducted for each outcome including proportion of students participating in three College Board exams, graduation rates, and meeting university graduation requirements. Findings suggest that SBHC presence is positively associated with college preparation outcomes but not with academic achievement outcomes (graduation rates or meeting state graduation requirements). Future research must examine underlying mechanisms supporting this association, such as school connectedness. Additional research should explore the role that SBHC staff could have in supporting college preparation efforts. © The Author(s) 2016.

Climate resilient crops for improving global food security and safety.

PubMed

Dhankher, Om Parkash; Foyer, Christine H

2018-05-01

Food security and the protection of the environment are urgent issues for global society, particularly with the uncertainties of climate change. Changing climate is predicted to have a wide range of negative impacts on plant physiology metabolism, soil fertility and carbon sequestration, microbial activity and diversity that will limit plant growth and productivity, and ultimately food production. Ensuring global food security and food safety will require an intensive research effort across the food chain, starting with crop production and the nutritional quality of the food products. Much uncertainty remains concerning the resilience of plants, soils, and associated microbes to climate change. Intensive efforts are currently underway to improve crop yields with lower input requirements and enhance the sustainability of yield through improved biotic and abiotic stress tolerance traits. In addition, significant efforts are focused on gaining a better understanding of the root/soil interface and associated microbiomes, as well as enhancing soil properties. © 2018 The Authors Plant, Cell & Environment Published by John Wiley & Sons Ltd.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elliott, Dennis; Frame, Caitlin; Gill, Carrie

The offshore renewable energy industry requires accurate meteorological and oceanographic (“metocean”) data for evaluating the energy potential, economic viability, and engineering requirements of offshore renewable energy projects. It is generally recognized that currently available metocean data, instrumentation, and models are not adequate to meet all of the stakeholder needs on a national scale. Conducting wind and wave resource assessments and establishing load design conditions requires both interagency collaboration as well as valuable input from experts in industry and academia. Under the Department of Energy and Department of Interior Memorandum of Understanding, the Resource Assessment and Design Condition initiative supports collaborativemore » national efforts by adding to core atmospheric and marine science knowledge relevant to offshore energy development. Such efforts include a more thorough understanding and data collection of key metocean phenomena such as wind velocity and shear; low-level jets; ocean, tidal, and current velocities; wave characteristics; geotechnical data relating to surface and subsurface characteristics; seasonal and diurnal variations; and the interaction among these conditions. Figure 1 presents a graphical representation of some metocean phenomena that can impact offshore energy systems. This document outlines the metocean observations currently available; those that are not available; and those that require additional temporal-spatial coverage, resolution, or processing for offshore energy in an effort to gather agreed-upon, needed observations.« less

Changes in inertia and effect on turning effort across different wheelchair configurations.

PubMed

Caspall, Jayme J; Seligsohn, Erin; Dao, Phuc V; Sprigle, Stephen

2013-01-01

When executing turning maneuvers, manual wheelchair users must overcome the rotational inertia of the wheelchair system. Differences in wheelchair rotational inertia can result in increases in torque required to maneuver, resulting in greater propulsion effort and stress on the shoulder joints. The inertias of various configurations of an ultralightweight wheelchair were measured using a rotational inertia-measuring device. Adjustments in axle position, changes in wheel and tire type, and the addition of several accessories had various effects on rotational inertias. The configuration with the highest rotational inertia (solid tires, mag wheels with rearward axle) exceeded the configuration with the lowest (pneumatic tires, spoke wheels with forward axle) by 28%. The greater inertia requires increased torque to accelerate the wheelchair during turning. At a representative maximum acceleration, the reactive torque spanned the range of 11.7 to 15.0 N-m across the wheelchair configurations. At higher accelerations, these torques exceeded that required to overcome caster scrub during turning. These results indicate that a wheelchair's rotational inertia can significantly influence the torque required during turning and that this influence will affect active users who turn at higher speeds. Categorizing wheelchairs using both mass and rotational inertia would better represent differences in effort during wheelchair maneuvers.

Modeling Impact and Cost-Effectiveness of Increased Efforts to Attract Voluntary Medical Male Circumcision Clients Ages 20-29 in Zimbabwe.

PubMed

Kripke, Katharine; Hatzold, Karin; Mugurungi, Owen; Ncube, Gertrude; Xaba, Sinokuthemba; Gold, Elizabeth; Ahanda, Kim Seifert; Kruse-Levy, Natalie; Njeuhmeli, Emmanuel

2016-01-01

Zimbabwe aims to increase circumcision coverage to 80% among 13- to 29-year-olds. However, implementation data suggest that high coverage among men ages 20 and older may not be achievable without efforts specifically targeted to these men, incurring additional costs per circumcision. Scale-up scenarios were created based on trends in implementation data in Zimbabwe, and the cost-effectiveness of increasing efforts to recruit clients ages 20-29 was examined. Zimbabwe voluntary medical male circumcision (VMMC) program data were used to project trends in male circumcision coverage by age into the future. The projection informed a base scenario in which, by 2018, the country achieves 80% circumcision coverage among males ages 10-19 and lower levels of coverage among men above age 20. The Zimbabwe DMPPT 2.0 model was used to project costs and impacts, assuming a US$109 VMMC unit cost in the base scenario and a 3% discount rate. Two other scenarios assumed that the program could increase coverage among clients ages 20-29 with a corresponding increase in unit cost for these age groups. When circumcision coverage among men ages 20-29 is increased compared with a base scenario reflecting current implementation trends, fewer VMMCs are required to avert one infection. If more than 50% additional effort (reflected as multiplying the unit cost by >1.5) is required to double the increase in coverage among this age group compared with the base scenario, the cost per HIV infection averted is higher than in the base scenario. Although increased investment in recruiting VMMC clients ages 20-29 may lead to greater overall impact if recruitment efforts are successful, it may also lead to lower cost-effectiveness, depending on the cost of increasing recruitment. Programs should measure the relationship between increased effort and increased ability to attract this age group.

Harmonization of good laboratory practice requirements and laboratory accreditation programs.

PubMed

Royal, P D

1994-09-01

Efforts to harmonize Good Laboratory Practice (GLP) requirements have been underway through the Organization for Economic Cooperation and Development (OECD) since 1981. In 1985, a GLP panel was established to facilitate the practical implementation of the OECD/GLP program. Through the OECD/GLP program, Memoranda of Understanding (MOU) agreements which foster requirements for reciprocal data and study acceptance and unified GLP standards have been developed among member countries. Three OECD Consensus Workshops and three inspectors training workshops have been held. In concert with these efforts, several OECD countries have developed GLP accreditation programs, managed by local health and environmental ministries. In addition, Canada and the United States are investigating Laboratory Accreditation programs for environmental monitoring assessment and GLP-regulated studies. In the European Community (EC), the need for quality standards specifying requirements for production and international trade has promoted International Standards Organization (ISO) certification for certain products. ISO-9000 standards identify requirements for certification of quality systems. These certification programs may affect the trade and market of laboratories conducting GLP studies. Two goals identified by these efforts are common to both programs: first, harmonization and recognition of requirements, and second, confidence in the rigor of program components used to assess the integrity of data produced and study activities. This confidence can be promoted, in part, through laboratory inspection and screening processes. However, the question remains, will data produced by sanctioned laboratories be mutually accepted on an international basis?(ABSTRACT TRUNCATED AT 250 WORDS)

Expendable launch vehicles technology: A report to the US Senate and the US House of Representatives

NASA Technical Reports Server (NTRS)

1990-01-01

As directed in Public Law 100-657, Commercial Space Launch Act Amendments of 1988, and consistent with National Space Policy, NASA has prepared a report on a potential program of research on technologies to reduce the initial and recurring costs, increase reliability, and improve performance of expendable launch vehicles for the launch of commercial and government spacecraft into orbit. The report was developed in consultation with industry and in recognition of relevant ongoing and planned NASA and DoD technology programs which will provide much of the required launch systems technology for U.S. Government needs. Additional efforts which could be undertaken to strengthen the technology base are identified. To this end, focus is on needs for launch vehicle technology development and, in selected areas, includes verification to permit private-sector new technology application at reduced risk. If such a program were to be implemented, it would entail both government and private-sector effort and resources. The additional efforts identified would augment the existing launch vehicle technology programs. The additional efforts identified have not been funded, based upon agency assessments of relative priority vis-a-vis the existing programs. Throughout the consultation and review process, the industry representatives stressed the overriding importance of continuing the DoD/NASA Advanced Launch Development activity and other government technology programs as a primary source of essential launch vehicle technology.

Expendable launch vehicles technology: A report to the US Senate and the US House of Representatives

NASA Astrophysics Data System (ADS)

1990-07-01

As directed in Public Law 100-657, Commercial Space Launch Act Amendments of 1988, and consistent with National Space Policy, NASA has prepared a report on a potential program of research on technologies to reduce the initial and recurring costs, increase reliability, and improve performance of expendable launch vehicles for the launch of commercial and government spacecraft into orbit. The report was developed in consultation with industry and in recognition of relevant ongoing and planned NASA and DoD technology programs which will provide much of the required launch systems technology for U.S. Government needs. Additional efforts which could be undertaken to strengthen the technology base are identified. To this end, focus is on needs for launch vehicle technology development and, in selected areas, includes verification to permit private-sector new technology application at reduced risk. If such a program were to be implemented, it would entail both government and private-sector effort and resources. The additional efforts identified would augment the existing launch vehicle technology programs. The additional efforts identified have not been funded, based upon agency assessments of relative priority vis-a-vis the existing programs. Throughout the consultation and review process, the industry representatives stressed the overriding importance of continuing the DoD/NASA Advanced Launch Development activity and other government technology programs as a primary source of essential launch vehicle technology.

High-density fuel effects. Final report, September 1985-April 1988

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rizk, N.K.; Oechsie, V.L.; Ross, P.T.

1988-08-18

The purpose of this program was to determine, by combustor rig tests and data evaluation, the effects of the high-density fuel properties on the performance and durability of the Allison T56-A-15 combustion system. Four high-density fuels in addition to baseline JP4 were evaluated in the effort. The rig-test program included: nozzle-flow bench testing, aerothermal performance and wall temperature, flame stability and ignition, injector coking and plugging, and flow-transient effect. The data-evaluation effort involved the utilization of empirical correlations in addition to analytical multidimensional tools to analyze the performance of the combustor. The modifications required to optimize the performance with high-densitymore » fuels were suggested and the expected improvement in performance was evaluated.« less

Satellite Power Systems (SPS) concept definition study. Volume 6: SPS technology requirements and verification

NASA Technical Reports Server (NTRS)

Hanley, G.

1978-01-01

Volume 6 of the SPS Concept Definition Study is presented and also incorporates results of NASA/MSFC in-house effort. This volume includes a supporting research and technology summary. Other volumes of the final report that provide additional detail are as follows: (1) Executive Summary; (2) SPS System Requirements; (3) SPS Concept Evolution; (4) SPS Point Design Definition; (5) Transportation and Operations Analysis; and Volume 7, SPS Program Plan and Economic Analysis.

Space Transfer Vehicle Concepts and Requirements Study. Volume 2, Book 2: System and Program Requirements Trade Studies

NASA Technical Reports Server (NTRS)

Weber, Gary A.

1991-01-01

During the 90-day study, support was provided to NASA in defining a point-of-departure space transfer vehicle (STV). The resulting STV concept was performance optimized with a two-stage LTV/LEV configuration. Appendix A reports on the effort during this period of the study. From the end of the 90-day study until the March Interim Review, effort was placed on optimizing the two-stage vehicle approach identified in the 90-day effort. After the March Interim Review, the effort was expanded to perform a full architectural trade study with the intent of developing a decision database to support STV system decisions in response to changing SEI infrastructure concepts. Several of the architecture trade studies were combined in a System Architecture Trade Study. In addition to this trade, system optimization/definition trades and analyses were completed and some special topics were addressed. Program- and system-level trade study and analyses methodologies and results are presented in this section. Trades and analyses covered in this section are: (1) a system architecture trade study; (2) evolution; (3) safety and abort considerations; (4) STV as a launch vehicle upper stage; and (5) optimum crew and cargo split.

A Model of Auditory-Cognitive Processing and Relevance to Clinical Applicability.

PubMed

Edwards, Brent

2016-01-01

Hearing loss and cognitive function interact in both a bottom-up and top-down relationship. Listening effort is tied to these interactions, and models have been developed to explain their relationship. The Ease of Language Understanding model in particular has gained considerable attention in its explanation of the effect of signal distortion on speech understanding. Signal distortion can also affect auditory scene analysis ability, however, resulting in a distorted auditory scene that can affect cognitive function, listening effort, and the allocation of cognitive resources. These effects are explained through an addition to the Ease of Language Understanding model. This model can be generalized to apply to all sounds, not only speech, representing the increased effort required for auditory environmental awareness and other nonspeech auditory tasks. While the authors have measures of speech understanding and cognitive load to quantify these interactions, they are lacking measures of the effect of hearing aid technology on auditory scene analysis ability and how effort and attention varies with the quality of an auditory scene. Additionally, the clinical relevance of hearing aid technology on cognitive function and the application of cognitive measures in hearing aid fittings will be limited until effectiveness is demonstrated in real-world situations.

Post-wildfire seeding to restore native vegetation and limit exotic annuals: an evaluation in juniper-dominated sagebrush steppe

USDA-ARS?s Scientific Manuscript database

Reestablishment of perennial vegetation is often need after wildfires to limit exotic species and restore ecosystem services. Some ecosystems, however, are resilient to disturbance and resistant to exotic plant invasions and do not require restoration efforts. If restoration is needed, an addition...

Praiseworthiness: predictors of positive interpersonal judgments.

PubMed

Ogletree, Shirley M; Covington, Jennifer A; Archer, Richard L

2013-06-01

Deterministic attitudes, information about a person's background, one's perceived similarity to a target person, and attributions of effort and ability may affect praiseworthiness. Two vignette studies with college student participants were conducted to consider this issue. Based on regression analyses, attributing achievement to effort was the strongest predictor of praiseworthiness across both studies. In addition, evidence for an augmenting effect of an impoverished background on praiseworthiness was found. In the first study, perceived similarity to the target individual and religious-philosophical determinism were also predictors of praiseworthiness, while belief in free will predicted praiseworthiness in the second study. Judgments of praiseworthiness may be tied to a number of factors; among the most important of these are overcoming an impoverished childhood background and the attributed effort required for success.

Approximate sample sizes required to estimate length distributions

USGS Publications Warehouse

Miranda, L.E.

2007-01-01

The sample sizes required to estimate fish length were determined by bootstrapping from reference length distributions. Depending on population characteristics and species-specific maximum lengths, 1-cm length-frequency histograms required 375-1,200 fish to estimate within 10% with 80% confidence, 2.5-cm histograms required 150-425 fish, proportional stock density required 75-140 fish, and mean length required 75-160 fish. In general, smaller species, smaller populations, populations with higher mortality, and simpler length statistics required fewer samples. Indices that require low sample sizes may be suitable for monitoring population status, and when large changes in length are evident, additional sampling effort may be allocated to more precisely define length status with more informative estimators. ?? Copyright by the American Fisheries Society 2007.

Modeling to Mars: a NASA Model Based Systems Engineering Pathfinder Effort

NASA Technical Reports Server (NTRS)

Phojanamongkolkij, Nipa; Lee, Kristopher A.; Miller, Scott T.; Vorndran, Kenneth A.; Vaden, Karl R.; Ross, Eric P.; Powell, Bobby C.; Moses, Robert W.

2017-01-01

The NASA Engineering Safety Center (NESC) Systems Engineering (SE) Technical Discipline Team (TDT) initiated the Model Based Systems Engineering (MBSE) Pathfinder effort in FY16. The goals and objectives of the MBSE Pathfinder include developing and advancing MBSE capability across NASA, applying MBSE to real NASA issues, and capturing issues and opportunities surrounding MBSE. The Pathfinder effort consisted of four teams, with each team addressing a particular focus area. This paper focuses on Pathfinder team 1 with the focus area of architectures and mission campaigns. These efforts covered the timeframe of February 2016 through September 2016. The team was comprised of eight team members from seven NASA Centers (Glenn Research Center, Langley Research Center, Ames Research Center, Goddard Space Flight Center IV&V Facility, Johnson Space Center, Marshall Space Flight Center, and Stennis Space Center). Collectively, the team had varying levels of knowledge, skills and expertise in systems engineering and MBSE. The team applied their existing and newly acquired system modeling knowledge and expertise to develop modeling products for a campaign (Program) of crew and cargo missions (Projects) to establish a human presence on Mars utilizing In-Situ Resource Utilization (ISRU). Pathfinder team 1 developed a subset of modeling products that are required for a Program System Requirement Review (SRR)/System Design Review (SDR) and Project Mission Concept Review (MCR)/SRR as defined in NASA Procedural Requirements. Additionally, Team 1 was able to perform and demonstrate some trades and constraint analyses. At the end of these efforts, over twenty lessons learned and recommended next steps have been identified.

Visual cues and listening effort: individual variability.

PubMed

Picou, Erin M; Ricketts, Todd A; Hornsby, Benjamin W Y

2011-10-01

To investigate the effect of visual cues on listening effort as well as whether predictive variables such as working memory capacity (WMC) and lipreading ability affect the magnitude of listening effort. Twenty participants with normal hearing were tested using a paired-associates recall task in 2 conditions (quiet and noise) and 2 presentation modalities (audio only [AO] and auditory-visual [AV]). Signal-to-noise ratios were adjusted to provide matched speech recognition across audio-only and AV noise conditions. Also measured were subjective perceptions of listening effort and 2 predictive variables: (a) lipreading ability and (b) WMC. Objective and subjective results indicated that listening effort increased in the presence of noise, but on average the addition of visual cues did not significantly affect the magnitude of listening effort. Although there was substantial individual variability, on average participants who were better lipreaders or had larger WMCs demonstrated reduced listening effort in noise in AV conditions. Overall, the results support the hypothesis that integrating auditory and visual cues requires cognitive resources in some participants. The data indicate that low lipreading ability or low WMC is associated with relatively effortful integration of auditory and visual information in noise.

Orthorectified High Resolution Multispectral Imagery for Application to Change Detection and Analysis

NASA Technical Reports Server (NTRS)

Benkelman, Cody A.

1997-01-01

The project team has outlined several technical objectives which will allow the companies to improve on their current capabilities. These include modifications to the imaging system, enabling it to operate more cost effectively and with greater ease of use, automation of the post-processing software to mosaic and orthorectify the image scenes collected, and the addition of radiometric calibration to greatly aid in the ability to perform accurate change detection. Business objectives include fine tuning of the market plan plus specification of future product requirements, expansion of sales activities (including identification of necessary additional resources required to meet stated revenue objectives), development of a product distribution plan, and implementation of a world wide sales effort.

Dopamine, Effort-Based Choice, and Behavioral Economics: Basic and Translational Research

PubMed Central

Salamone, John D.; Correa, Merce; Yang, Jen-Hau; Rotolo, Renee; Presby, Rose

2018-01-01

Operant behavior is not only regulated by factors related to the quality or quantity of reinforcement, but also by the work requirements inherent in performing instrumental actions. Moreover, organisms often make effort-related decisions involving economic choices such as cost/benefit analyses. Effort-based decision making is studied using behavioral procedures that offer choices between high-effort options leading to relatively preferred reinforcers vs. low effort/low reward choices. Several neural systems, including the mesolimbic dopamine (DA) system and other brain circuits, are involved in regulating effort-related aspects of motivation. Considerable evidence indicates that mesolimbic DA transmission exerts a bi-directional control over exertion of effort on instrumental behavior tasks. Interference with DA transmission produces a low-effort bias in animals tested on effort-based choice tasks, while increasing DA transmission with drugs such as DA transport blockers tends to enhance selection of high-effort options. The results from these pharmacology studies are corroborated by the findings from recent articles using optogenetic, chemogenetic and physiological techniques. In addition to providing important information about the neural regulation of motivated behavior, effort-based choice tasks are useful for developing animal models of some of the motivational symptoms that are seen in people with various psychiatric and neurological disorders (e.g., depression, schizophrenia, Parkinson’s disease). Studies of effort-based decision making may ultimately contribute to the development of novel drug treatments for motivational dysfunction. PMID:29628879

Dopamine, Effort-Based Choice, and Behavioral Economics: Basic and Translational Research.

PubMed

Salamone, John D; Correa, Merce; Yang, Jen-Hau; Rotolo, Renee; Presby, Rose

2018-01-01

Operant behavior is not only regulated by factors related to the quality or quantity of reinforcement, but also by the work requirements inherent in performing instrumental actions. Moreover, organisms often make effort-related decisions involving economic choices such as cost/benefit analyses. Effort-based decision making is studied using behavioral procedures that offer choices between high-effort options leading to relatively preferred reinforcers vs. low effort/low reward choices. Several neural systems, including the mesolimbic dopamine (DA) system and other brain circuits, are involved in regulating effort-related aspects of motivation. Considerable evidence indicates that mesolimbic DA transmission exerts a bi-directional control over exertion of effort on instrumental behavior tasks. Interference with DA transmission produces a low-effort bias in animals tested on effort-based choice tasks, while increasing DA transmission with drugs such as DA transport blockers tends to enhance selection of high-effort options. The results from these pharmacology studies are corroborated by the findings from recent articles using optogenetic, chemogenetic and physiological techniques. In addition to providing important information about the neural regulation of motivated behavior, effort-based choice tasks are useful for developing animal models of some of the motivational symptoms that are seen in people with various psychiatric and neurological disorders (e.g., depression, schizophrenia, Parkinson's disease). Studies of effort-based decision making may ultimately contribute to the development of novel drug treatments for motivational dysfunction.

Environmental Assessment (EA) for the Construction of the Commissary Addition at Eglin Air Force Base, Florida. Appendices

DTIC Science & Technology

1991-06-07

24, 1989 the 10% submittal was sent to AFCOMS and subsequently approved. Following that, the 30% design was completed and submitted for review . The 35... review was held on August 30, 1989 at Eglin AFB. The project’s original Scope of Work states: "The project includes construction of an approximately... review , it was decided that additional information would be required before the design effort would be allowed to move forward. The Design Team was then

Minimal-effort planning of active alignment processes for beam-shaping optics

NASA Astrophysics Data System (ADS)

Haag, Sebastian; Schranner, Matthias; Müller, Tobias; Zontar, Daniel; Schlette, Christian; Losch, Daniel; Brecher, Christian; Roßmann, Jürgen

2015-03-01

In science and industry, the alignment of beam-shaping optics is usually a manual procedure. Many industrial applications utilizing beam-shaping optical systems require more scalable production solutions and therefore effort has been invested in research regarding the automation of optics assembly. In previous works, the authors and other researchers have proven the feasibility of automated alignment of beam-shaping optics such as collimation lenses or homogenization optics. Nevertheless, the planning efforts as well as additional knowledge from the fields of automation and control required for such alignment processes are immense. This paper presents a novel approach of planning active alignment processes of beam-shaping optics with the focus of minimizing the planning efforts for active alignment. The approach utilizes optical simulation and the genetic programming paradigm from computer science for automatically extracting features from a simulated data basis with a high correlation coefficient regarding the individual degrees of freedom of alignment. The strategy is capable of finding active alignment strategies that can be executed by an automated assembly system. The paper presents a tool making the algorithm available to end-users and it discusses the results of planning the active alignment of the well-known assembly of a fast-axis collimator. The paper concludes with an outlook on the transferability to other use cases such as application specific intensity distributions which will benefit from reduced planning efforts.

Accounting for Incomplete Species Detection in Fish Community Monitoring

DOE Office of Scientific and Technical Information (OSTI.GOV)

McManamay, Ryan A; Orth, Dr. Donald J; Jager, Yetta

2013-01-01

Riverine fish assemblages are heterogeneous and very difficult to characterize with a one-size-fits-all approach to sampling. Furthermore, detecting changes in fish assemblages over time requires accounting for variation in sampling designs. We present a modeling approach that permits heterogeneous sampling by accounting for site and sampling covariates (including method) in a model-based framework for estimation (versus a sampling-based framework). We snorkeled during three surveys and electrofished during a single survey in suite of delineated habitats stratified by reach types. We developed single-species occupancy models to determine covariates influencing patch occupancy and species detection probabilities whereas community occupancy models estimated speciesmore » richness in light of incomplete detections. For most species, information-theoretic criteria showed higher support for models that included patch size and reach as covariates of occupancy. In addition, models including patch size and sampling method as covariates of detection probabilities also had higher support. Detection probability estimates for snorkeling surveys were higher for larger non-benthic species whereas electrofishing was more effective at detecting smaller benthic species. The number of sites and sampling occasions required to accurately estimate occupancy varied among fish species. For rare benthic species, our results suggested that higher number of occasions, and especially the addition of electrofishing, may be required to improve detection probabilities and obtain accurate occupancy estimates. Community models suggested that richness was 41% higher than the number of species actually observed and the addition of an electrofishing survey increased estimated richness by 13%. These results can be useful to future fish assemblage monitoring efforts by informing sampling designs, such as site selection (e.g. stratifying based on patch size) and determining effort required (e.g. number of sites versus occasions).« less

Action-specific effects underwater.

PubMed

Witt, Jessica K; Schuck, Donald M; Taylor, J Eric T

2011-01-01

Action-specific effects on perception are apparent in terrestrial environments. For example, targets that require more effort to walk, jump, or throw to look farther away than when the targets require less effort. Here, we examined whether action-specific effects would generalize to an underwater environment. Instead, perception might be geometrically precise, rather than action-specific, in an environment that is novel from an evolutionary perspective. We manipulated ease to swim by giving participants swimming flippers or taking them away. Those who estimated distance while wearing the flippers judged underwater targets to be closer than did participants who had taken them off. In addition, participants with better swimming ability judged the targets to be closer than did those with worse swimming ability. These results suggest perceived distance underwater is a function of the perceiver's ability to swim to the targets.

Towards Systems that Care: A Conceptual Framework Based on Motivation, Metacognition and Affect

ERIC Educational Resources Information Center

du Boulay, Benedict; Avramides, Katerina; Luckin, Rosemary; Martinez-Miron, Erika; Rebolledo-Mendez, Genaro; Carr, Amanda

2010-01-01

This paper describes a Conceptual Framework underpinning "Systems that Care" in terms of educational systems that take account of motivation, metacognition and affect, in addition to cognition. The main focus is on "motivation," as learning requires the student to put in effort and be engaged, in other words to be motivated to learn. But…

Coral Reefs, Convicts, Cadavers, Coffee Shops and Couture: Customizing Experiential Learning to Increase Comfort and Engagement

ERIC Educational Resources Information Center

Grabowsky, Gail L.; Hargis, Jace; Davidson, Janet; Paynter, Allison; Suh, Junghwa; Wright, Claire

2017-01-01

Experiential learning (EL) can offer a high impact educational opportunity that benefits students from diverse backgrounds, creating an inclusive learning environment. Barriers to the generalization of EL can include a lack of institutional support, risk avoidance, time, and faculty instructional ability. As well EL require additional efforts from…

Special Features of the Advanced Loans Module of the ABCD Integrated Library System

ERIC Educational Resources Information Center

de Smet, Egbert

2011-01-01

Purpose: The "advanced loans" module of the relatively new library software, ABCD, is an addition to the normal loans module and it offers a "generic transaction decision-making engine" functionality. The module requires extra installation effort and parameterisation, so this article aims to explain to the many potentially interested libraries,…

Separate and overlapping brain areas encode subjective value during delay and effort discounting.

PubMed

Massar, Stijn A A; Libedinsky, Camilo; Weiyan, Chee; Huettel, Scott A; Chee, Michael W L

2015-10-15

Making decisions about rewards that involve delay or effort requires the integration of value and cost information. The brain areas recruited in this integration have been well characterized for delay discounting. However only a few studies have investigated how effort costs are integrated into value signals to eventually determine choice. In contrast to previous studies that have evaluated fMRI signals related to physical effort, we used a task that focused on cognitive effort. Participants discounted the value of delayed and effortful rewards. The value of cognitively effortful rewards was represented in the anterior portion of the inferior frontal gyrus and dorsolateral prefrontal cortex. Additionally, the value of the chosen option was encoded in the anterior cingulate cortex, caudate, and cerebellum. While most brain regions showed no significant dissociation between effort discounting and delay discounting, the ACC was significantly more activated in effort compared to delay discounting tasks. Finally, overlapping regions within the right orbitofrontal cortex and lateral temporal and parietal cortices encoded the value of the chosen option during both delay and effort discounting tasks. These results indicate that encoding of rewards discounted by cognitive effort and delay involves partially dissociable brain areas, but a common representation of chosen value is present in the orbitofrontal, temporal and parietal cortices. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Why Did Zika Not Explode in Cuba? The Role of Active Community Participation to Sustain Control of Vector-Borne Diseases.

PubMed

Castro, Marta; Pérez, Dennis; Guzman, Maria G; Barrington, Clare

2017-08-01

As the global public health community develops strategies for sustainable Zika prevention and control, assessment of the Cuban response to Zika provides critical lessons learned. Cuba's early and successful response to Zika, grounded in the country's long-standing dengue prevention and control program, serves as a model of rapid mobilization of intersectoral efforts. Sustaining this response requires applying the evidence generated within the Cuban dengue program that active community participation improves outcomes and is sustainable and cost-effective. There is also a need for implementation science efforts to assess the transferability of lessons learned from Zika prevention and control to other pathogens and from one context to another in addition to how to take these efforts to scale.

Turbulence modeling of free shear layers for high performance aircraft

NASA Technical Reports Server (NTRS)

Sondak, Douglas

1993-01-01

In many flowfield computations, accuracy of the turbulence model employed is frequently a limiting factor in the overall accuracy of the computation. This is particularly true for complex flowfields such as those around full aircraft configurations. Free shear layers such as wakes, impinging jets (in V/STOL applications), and mixing layers over cavities are often part of these flowfields. Although flowfields have been computed for full aircraft, the memory and CPU requirements for these computations are often excessive. Additional computer power is required for multidisciplinary computations such as coupled fluid dynamics and conduction heat transfer analysis. Massively parallel computers show promise in alleviating this situation, and the purpose of this effort was to adapt and optimize CFD codes to these new machines. The objective of this research effort was to compute the flowfield and heat transfer for a two-dimensional jet impinging normally on a cool plate. The results of this research effort were summarized in an AIAA paper titled 'Parallel Implementation of the k-epsilon Turbulence Model'. Appendix A contains the full paper.

Work Stress and Altered Biomarkers: A Synthesis of Findings Based on the Effort-Reward Imbalance Model.

PubMed

Siegrist, Johannes; Li, Jian

2017-11-10

While epidemiological studies provide statistical evidence on associations of exposures such as stressful work with elevated risks of stress-related disorders (e.g., coronary heart disease or depression), additional information on biological pathways and biomarkers underlying these associations is required. In this contribution, we summarize the current state of the art on research findings linking stressful work, in terms of an established theoretical model-effort-reward imbalance-with a broad range of biomarkers. Based on structured electronic literature search and recent available systematic reviews, our synthesis of findings indicates that associations of work stress with heart rate variability, altered blood lipids, and risk of metabolic syndrome are rather consistent and robust. Significant relationships with blood pressure, heart rate, altered immune function and inflammation, cortisol release, and haemostatic biomarkers were also observed, but due to conflicting findings additional data will be needed to reach a firm conclusion. This narrative review of empirical evidence supports the argument that the biomarkers under study can act as mediators of epidemiologically established associations of work stress, as measured by effort-reward imbalance, with incident stress-related disorders.

Spacelab dedicated discipline laboratory (DDL) utilization concept

NASA Technical Reports Server (NTRS)

Wunsch, P.; De Sanctis, C.

1984-01-01

The dedicated discipline laboratory (DDL) concept is a new approach for implementing Spacelab missions that involves the grouping of science instruments into mission complements of single or compatible disciplines. These complements are evolved in such a way that the DDL payloads can be left intact between flights. This requires the dedication of flight hardware to specific payloads on a long-term basis and raises the concern that the purchase of additional flight hardware will be required to implement the DDL program. However, the payoff is expected to result in significant savings in mission engineering and assembly effort. A study has been conducted recently to quantify both the requirements for new hardware and the projected mission cost savings. It was found that some incremental additions to the current inventory will be needed to fly the mission model assumed. Cost savings of $2M to 6.5M per mission were projected in areas analyzed in depth, and additional savings may occur in areas for which detailed cost data were not available.

RELAP-7 Code Assessment Plan and Requirement Traceability Matrix

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoo, Junsoo; Choi, Yong-joon; Smith, Curtis L.

2016-10-01

The RELAP-7, a safety analysis code for nuclear reactor system, is under development at Idaho National Laboratory (INL). Overall, the code development is directed towards leveraging the advancements in computer science technology, numerical solution methods and physical models over the last decades. Recently, INL has also been putting an effort to establish the code assessment plan, which aims to ensure an improved final product quality through the RELAP-7 development process. The ultimate goal of this plan is to propose a suitable way to systematically assess the wide range of software requirements for RELAP-7, including the software design, user interface, andmore » technical requirements, etc. To this end, we first survey the literature (i.e., international/domestic reports, research articles) addressing the desirable features generally required for advanced nuclear system safety analysis codes. In addition, the V&V (verification and validation) efforts as well as the legacy issues of several recently-developed codes (e.g., RELAP5-3D, TRACE V5.0) are investigated. Lastly, this paper outlines the Requirement Traceability Matrix (RTM) for RELAP-7 which can be used to systematically evaluate and identify the code development process and its present capability.« less

Voice Function Differences Following Resting Breathing vs. Submaximal Exercise

PubMed Central

Sandage, Mary J.; Connor, Nadine P.; Pascoe, David D.

2013-01-01

Objectives/Hypothesis There is little known about how physical exercise may alter physiological parameters of voice production. In this investigation, vocal function and upper airway temperature were examined following a bout of submaximal exercise and compared with a resting breathing condition. It was hypothesized that phonation threshold pressure and perceived phonatory effort would increase, and pharyngeal temperature would decrease following an exercise bout. Study Design Using a within-participant repeated measures design, 18 consented participants (9 men, 9 women) completed the study. Methods A 20-minute equilibration task was immediately followed by 8 minutes of submaximal exercise on a stationary bike in a thermally neutral environment (25°C/40% RH). At the end of the equilibration trial and the exercise trial measures were taken in the following order: pharyngeal temperature, phonation threshold pressure, and perceived phonatory effort. Data were analyzed using paired t-tests with significance set at α<0.05. Results Significantly increased phonation threshold pressure and perceived phonatory effort and significantly decreased pharyngeal temperature (1.9°C) were found, supporting the initial hypotheses. Conclusions Findings from this investigation support the widely held belief that voice use associated with physical activity requires additional laryngeal effort and closure forces. The effect of the temperature reduction in the upper airway on voice function requires further study. PMID:23849683

Best Practices of Collaboration in Arctic Research: How to Succeed, or Fail, in Cross-Disciplinary Efforts

NASA Astrophysics Data System (ADS)

Wiggins, H. V.

2014-12-01

The rapid physical and social changes currently underway in the Arctic - and changes in the way in which we study and manage the region - require coordinated research efforts to improve our understanding of the Arctic's physical, biological, and social systems. At the same time, policy-makers and Arctic communities need decision-support tools and synthesized information to respond and adapt to the "new arctic". There are enormous challenges, however, in collaboration among the disparate groups of people needed for such efforts. A carefully planned strategic approach is required to bridge the scientific disciplinary and organizational boundaries, foster cooperation between local communities and science programs, and effectively communicate between scientists and policy-makers. Efforts must draw on bodies of knowledge from project management, strategic planning, organizational development, group dynamics, and other fields. In addition, collaborations between scientific disciplines face challenges unique to scientific culture. This poster presentation will discuss best practices of building and sustaining networks of people to catalyze successful cross-disciplinary activities. Specific examples and case studies - both successes and failures - will be presented that draw on several projects at the Arctic Research Consortium of the U.S. (ARCUS; www.arcus.org), a nonprofit membership organization composed of universities and institutions that have a substantial commitment to research in the Arctic.

A Fully Non-metallic Gas Turbine Engine Enabled by Additive Manufacturing

NASA Technical Reports Server (NTRS)

Grady, Joseph E.

2014-01-01

The Non-Metallic Gas Turbine Engine project, funded by NASA Aeronautics Research Institute (NARI), represents the first comprehensive evaluation of emerging materials and manufacturing technologies that will enable fully nonmetallic gas turbine engines. This will be achieved by assessing the feasibility of using additive manufacturing technologies for fabricating polymer matrix composite (PMC) and ceramic matrix composite (CMC) gas turbine engine components. The benefits of the proposed effort include: 50 weight reduction compared to metallic parts, reduced manufacturing costs due to less machining and no tooling requirements, reduced part count due to net shape single component fabrication, and rapid design change and production iterations. Two high payoff metallic components have been identified for replacement with PMCs and will be fabricated using fused deposition modeling (FDM) with high temperature capable polymer filaments. The first component is an acoustic panel treatment with a honeycomb structure with an integrated back sheet and perforated front sheet. The second component is a compressor inlet guide vane. The CMC effort, which is starting at a lower technology readiness level, will use a binder jet process to fabricate silicon carbide test coupons and demonstration articles. The polymer and ceramic additive manufacturing efforts will advance from monolithic materials toward silicon carbide and carbon fiber reinforced composites for improved properties. Microstructural analysis and mechanical testing will be conducted on the PMC and CMC materials. System studies will assess the benefits of fully nonmetallic gas turbine engine in terms of fuel burn, emissions, reduction of part count, and cost. The proposed effort will be focused on a small 7000 lbf gas turbine engine. However, the concepts are equally applicable to large gas turbine engines. The proposed effort includes a multidisciplinary, multiorganization NASA - industry team that includes experts in ceramic materials and CMCs, polymers and PMCs, structural engineering, additive manufacturing, engine design and analysis, and system analysis.

Neural Signatures of Value Comparison in Human Cingulate Cortex during Decisions Requiring an Effort-Reward Trade-off

PubMed Central

Kennerley, Steven W.; Friston, Karl; Bestmann, Sven

2016-01-01

Integrating costs and benefits is crucial for optimal decision-making. Although much is known about decisions that involve outcome-related costs (e.g., delay, risk), many of our choices are attached to actions and require an evaluation of the associated motor costs. Yet how the brain incorporates motor costs into choices remains largely unclear. We used human fMRI during choices involving monetary reward and physical effort to identify brain regions that serve as a choice comparator for effort-reward trade-offs. By independently varying both options' effort and reward levels, we were able to identify the neural signature of a comparator mechanism. A network involving supplementary motor area and the caudal portion of dorsal anterior cingulate cortex encoded the difference in reward (positively) and effort levels (negatively) between chosen and unchosen choice options. We next modeled effort-discounted subjective values using a novel behavioral model. This revealed that the same network of regions involving dorsal anterior cingulate cortex and supplementary motor area encoded the difference between the chosen and unchosen options' subjective values, and that activity was best described using a concave model of effort-discounting. In addition, this signal reflected how precisely value determined participants' choices. By contrast, separate signals in supplementary motor area and ventromedial prefrontal cortex correlated with participants' tendency to avoid effort and seek reward, respectively. This suggests that the critical neural signature of decision-making for choices involving motor costs is found in human cingulate cortex and not ventromedial prefrontal cortex as typically reported for outcome-based choice. Furthermore, distinct frontal circuits seem to drive behavior toward reward maximization and effort minimization. SIGNIFICANCE STATEMENT The neural processes that govern the trade-off between expected benefits and motor costs remain largely unknown. This is striking because energetic requirements play an integral role in our day-to-day choices and instrumental behavior, and a diminished willingness to exert effort is a characteristic feature of a range of neurological disorders. We use a new behavioral characterization of how humans trade off reward maximization with effort minimization to examine the neural signatures that underpin such choices, using BOLD MRI neuroimaging data. We find the critical neural signature of decision-making, a signal that reflects the comparison of value between choice options, in human cingulate cortex, whereas two distinct brain circuits drive behavior toward reward maximization or effort minimization. PMID:27683898

Neural Signatures of Value Comparison in Human Cingulate Cortex during Decisions Requiring an Effort-Reward Trade-off.

PubMed

Klein-Flügge, Miriam C; Kennerley, Steven W; Friston, Karl; Bestmann, Sven

2016-09-28

Integrating costs and benefits is crucial for optimal decision-making. Although much is known about decisions that involve outcome-related costs (e.g., delay, risk), many of our choices are attached to actions and require an evaluation of the associated motor costs. Yet how the brain incorporates motor costs into choices remains largely unclear. We used human fMRI during choices involving monetary reward and physical effort to identify brain regions that serve as a choice comparator for effort-reward trade-offs. By independently varying both options' effort and reward levels, we were able to identify the neural signature of a comparator mechanism. A network involving supplementary motor area and the caudal portion of dorsal anterior cingulate cortex encoded the difference in reward (positively) and effort levels (negatively) between chosen and unchosen choice options. We next modeled effort-discounted subjective values using a novel behavioral model. This revealed that the same network of regions involving dorsal anterior cingulate cortex and supplementary motor area encoded the difference between the chosen and unchosen options' subjective values, and that activity was best described using a concave model of effort-discounting. In addition, this signal reflected how precisely value determined participants' choices. By contrast, separate signals in supplementary motor area and ventromedial prefrontal cortex correlated with participants' tendency to avoid effort and seek reward, respectively. This suggests that the critical neural signature of decision-making for choices involving motor costs is found in human cingulate cortex and not ventromedial prefrontal cortex as typically reported for outcome-based choice. Furthermore, distinct frontal circuits seem to drive behavior toward reward maximization and effort minimization. The neural processes that govern the trade-off between expected benefits and motor costs remain largely unknown. This is striking because energetic requirements play an integral role in our day-to-day choices and instrumental behavior, and a diminished willingness to exert effort is a characteristic feature of a range of neurological disorders. We use a new behavioral characterization of how humans trade off reward maximization with effort minimization to examine the neural signatures that underpin such choices, using BOLD MRI neuroimaging data. We find the critical neural signature of decision-making, a signal that reflects the comparison of value between choice options, in human cingulate cortex, whereas two distinct brain circuits drive behavior toward reward maximization or effort minimization. Copyright © 2016 Klein-Flügge et al.

Integrating Popular Web Applications in Classroom Learning Environments and Its Effects on Teaching, Student Learning Motivation and Performance

ERIC Educational Resources Information Center

Lin, Yen-Ting; Jou, Min

2013-01-01

Advancements in information and communication technology (ICT) allowed several tools and systems to be proposed for improving classroom experiences to both instructors and students. However, most of these tools were brand-new and stand-alone programs that require users to invest additional time and effort to become familiar with their use. This…

Children and Pesticides: New Approach to Considering Risk Is Partly in Place. Report to Congressional Requesters.

ERIC Educational Resources Information Center

Heinrich, Janet

The Food Quality Protection Act of 1996 (FQPA) requires that the Environmental Protection Agency (EPA), which regulates the use of pesticides at the federal level, reevaluate the amounts of pesticide residues allowed on or in food. The EPA immediately began efforts to consider the additional safety factor for children, using available methods and…

Population status of prairie dogs (Cynomys ludovicianus) in the San Pedro River Basin, Sonora

Treesearch

Efren Moreno-Arzate; Carlos A. Lopez Gonzalez; Gerardo Carreon Arroyo

2013-01-01

The black tailed prairie dog (Cynomys ludovicianus) is a species of conservation concern for Mexico, the United States and Canada. Populations in Mexico (including those in Sonora), which are considered endangered by the Mexican authority, require additional conservation efforts to maintain them on the long term. Our objective was to determine population size and...

Large, horizontal-axis wind turbines

NASA Technical Reports Server (NTRS)

Linscott, B. S.; Perkins, P.; Dennett, J. T.

1984-01-01

Development of the technology for safe, reliable, environmentally acceptable large wind turbines that have the potential to generate a significant amount of electricity at costs competitive with conventional electric generating systems are presented. In addition, these large wind turbines must be fully compatible with electric utility operations and interface requirements. There are several ongoing large wind system development projects and applied research efforts directed toward meeting the technology requirements for utility applications. Detailed information on these projects is provided. The Mod-O research facility and current applied research effort in aerodynamics, structural dynamics and aeroelasticity, composite and hybrid composite materials, and multiple system interaction are described. A chronology of component research and technology development for large, horizontal axis wind turbines is presented. Wind characteristics, wind turbine economics, and the impact of wind turbines on the environment are reported. The need for continued wind turbine research and technology development is explored. Over 40 references are sited and a bibliography is included.

Reliability of the individual components of the Canadian Armed Forces Physical Employment Standard.

PubMed

Stockbrugger, Barry G; Reilly, Tara J; Blacklock, Rachel E; Gagnon, Patrick J

2018-01-29

This investigation recruited 24 participants from both the Canadian Armed Forces (CAF) and civilian populations to complete 4 separate trials at "best effort" of each of the 4 components in the CAF Physical Employment Standard named the FORCE Evaluation: Fitness for Operational Requirements of CAF Employment. Analyses were performed to examine the level of variability and reliability within each component. The results demonstrate that candidates should be provided with at least 1 retest if they have recently completed at least 2 previous best effort attempts as per the protocol. In addition, the minimal detectable difference is given for each of the 4 components in seconds which identifies the threshold for subsequent action, either retest or remedial training, for those unable to meet the minimum standard. These results will educate the delivery of this employment standard, function as a method of accommodation, in addition to providing direction for physical training programs.

Overview of the NASA Entry, Descent and Landing Systems Analysis Exploration Feed-Forward Study

NASA Technical Reports Server (NTRS)

DwyerCianciolo, Alicia M.; Zang, Thomas A.; Sostaric, Ronald R.; McGuire, M. Kathy

2011-01-01

Technology required to land large payloads (20 to 50 mt) on Mars remains elusive. In an effort to identify the most viable investment path, NASA and others have been studying various concepts. One such study, the Entry, Descent and Landing Systems Analysis (EDLSA) Study [1] identified three potential options: the rigid aeroshell, the inflatable aeroshell and supersonic retropropulsion (SRP). In an effort to drive out additional levels of design detail, a smaller demonstrator, or exploration feed-forward (EFF), robotic mission was devised that utilized two of the three (inflatable aeroshell and SRP) high potential technologies in a configuration to demonstrate landing a two to four metric ton payload on Mars. This paper presents and overview of the maximum landed mass, inflatable aeroshell controllability and sensor suite capability assessments of the selected technologies and recommends specific technology areas for additional work.

A Study of Gaps in Network Knowledge Synthesis

DTIC Science & Technology

2015-10-18

several authorizations is present. PPSI has an additional nm computational overhead beyond the complexity of PSI itself, where n is the maximum number of...devices are black boxes M L 5 Sensors require collection across multiple layers M L D at a C ol le ct io n 1 Collection at line speed is very hard H H 2...Requires manual effort to specify what data to collect M L 10 Cannot work on encoded/compressed data M L D at a F il te ri n g 1 Trade-off between

Neurocomputational mechanisms underlying subjective valuation of effort costs

PubMed Central

Giehl, Kathrin; Sillence, Annie

2017-01-01

In everyday life, we have to decide whether it is worth exerting effort to obtain rewards. Effort can be experienced in different domains, with some tasks requiring significant cognitive demand and others being more physically effortful. The motivation to exert effort for reward is highly subjective and varies considerably across the different domains of behaviour. However, very little is known about the computational or neural basis of how different effort costs are subjectively weighed against rewards. Is there a common, domain-general system of brain areas that evaluates all costs and benefits? Here, we used computational modelling and functional magnetic resonance imaging (fMRI) to examine the mechanisms underlying value processing in both the cognitive and physical domains. Participants were trained on two novel tasks that parametrically varied either cognitive or physical effort. During fMRI, participants indicated their preferences between a fixed low-effort/low-reward option and a variable higher-effort/higher-reward offer for each effort domain. Critically, reward devaluation by both cognitive and physical effort was subserved by a common network of areas, including the dorsomedial and dorsolateral prefrontal cortex, the intraparietal sulcus, and the anterior insula. Activity within these domain-general areas also covaried negatively with reward and positively with effort, suggesting an integration of these parameters within these areas. Additionally, the amygdala appeared to play a unique, domain-specific role in processing the value of rewards associated with cognitive effort. These results are the first to reveal the neurocomputational mechanisms underlying subjective cost–benefit valuation across different domains of effort and provide insight into the multidimensional nature of motivation. PMID:28234892

Motor Effort Alters Changes of Mind in Sensorimotor Decision Making

PubMed Central

Burk, Diana; Ingram, James N.; Franklin, David W.; Shadlen, Michael N.; Wolpert, Daniel M.

2014-01-01

After committing to an action, a decision-maker can change their mind to revise the action. Such changes of mind can even occur when the stream of information that led to the action is curtailed at movement onset. This is explained by the time delays in sensory processing and motor planning which lead to a component at the end of the sensory stream that can only be processed after initiation. Such post-initiation processing can explain the pattern of changes of mind by asserting an accumulation of additional evidence to a criterion level, termed change-of-mind bound. Here we test the hypothesis that physical effort associated with the movement required to change one's mind affects the level of the change-of-mind bound and the time for post-initiation deliberation. We varied the effort required to change from one choice target to another in a reaching movement by varying the geometry of the choice targets or by applying a force field between the targets. We show that there is a reduction in the frequency of change of mind when the separation of the choice targets would require a larger excursion of the hand from the initial to the opposite choice. The reduction is best explained by an increase in the evidence required for changes of mind and a reduced time period of integration after the initial decision. Thus the criteria to revise an initial choice is sensitive to energetic costs. PMID:24651615

Population estimates and monitoring guidelines for endangered Laysan Teal, Anas Laysanensis, at Midway Atoll: Pilot study results 2008-2010.

USGS Publications Warehouse

Reynolds, Michelle H.; Brinck, Kevin W.; Laniawe, Leona

2011-01-01

To improve the Laysan Teal population estimates, we recommend changes to the monitoring protocol. Additional years of data are needed to quantify inter-annual seasonal detection probabilities, which may allow the use of standardized direct counts as an unbiased index of population size. Survey protocols should be enhanced through frequent resights, regular survey intervals, and determining reliable standards to detect catastrophic declines and annual changes in adult abundance. In late 2009 to early 2010, 68% of the population was marked with unique color band combinations. This allowed for potentially accurate adult population estimates and survival estimates without the need to mark new birds in 2010, 2011, and possibly 2012. However, efforts should be made to replace worn or illegible bands so birds can be identified in future surveys. It would be valuable to develop more sophisticated population size and survival models using Program MARK, a state-of-the-art software package which uses likelihood models to analyze mark-recapture data. This would allow for more reliable adult population and survival estimates to compare with the ―source‖ Laysan Teal population on Laysan Island. These models will require additional years of resight data (> 1 year) and, in some cases, an intensive annual effort of marking and recapture. Because data indicate standardized all-wetland counts are a poor index of abundance, monitoring efforts could be improved by expanding resight surveys to include all wetlands, discontinuing the all-wetland counts, and reallocating some of the wetland count effort to collect additional opportunistic resights. Approximately two years of additional bimonthly surveys are needed to validate the direct count as an appropriate index of population abundance. Additional years of individual resight data will allow estimates of adult population size, as specified in recovery criteria, and to track species population dynamics at Midway Atoll.

Continuous glucose monitoring and clinical trials.

PubMed

Heinemann, Lutz

2009-07-01

The use of glucose sensors during clinical trials seems like a great idea at first glance. Continuous glucose monitoring (CGM) should allow the gathering of more detailed information about metabolic control, without requiring much additional effort. In principle, CGM can reduce the duration of such studies and the number of participants required. The aim of this commentary is to highlight some of the reasons why, in practice, at least some of these hopes have not been realized. It is not only that a new technology requires extensive training of the study personnel; the practical handling of the devices and the time and effort required to download and analyze the data are often grossly underestimated initially. In addition, one must select the best endpoints for describing the level of metabolic control in view of the overwhelming amount of information provided by CGM. Several measures and endpoints were proposed as (potential) parameters that would be more meaningful than the standard parameters currently used to describe glucose profiles. Unfortunately, most of these proposed parameters have not, as yet, been proven to be more meaningful. Calibration is another critical aspect of using CGM that must be addressed. How this procedure is handled in practice has a profound impact on the quality of the glucose recordings. Finally, shall the current measurement results be displayed to the study participant or not? CGM can help prevent severe hypoglycemic episodes, but this can profoundly affect the study outcome in a manner that is unrelated to basic aim of the study (e.g., comparing medications that are designed to control glycemia). Therefore, the use of CGM in clinical trials requires much more careful consideration than was initially thought. Copyright 2009 Diabetes Technology Society.

Design and Implementation of Clinical Trials of Ion Beam Therapy

NASA Astrophysics Data System (ADS)

Cox, James D.

Design and implementation of clinical trials are complex even when those trials involve established technologies. Ion beam therapy (IBT) imposes additional requirements including sufficient institutional experience using ions for treatment, credentialing of institutions, formulating hypotheses of interest to investigators and to patients, and securing funding from national and private agencies. The effort, though, is very important to the future of radiation oncology.

Defense Health Care: Better Tracking and Oversight Needed of Servicemember Separations for Non-Disability Mental Conditions

DTIC Science & Technology

2015-02-01

deficit hyperactivity disorder . 4GAO, Defense Health Care: Additional Efforts Needed to Ensure Compliance with Personality Disorder Separation...acute adjustment disorder , disruptive behavior disorder , impulse control disorder , personality disorder , and other mental conditions, such as attention ...requirements when separating servicemembers for a personality disorder . Our interviews and review of policies and compliance reports allowed us to

Plan and Annual Report Requirements for Compliance With the Additional Apportionment Provisions of Chapter 241 of the Laws of 1974.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Office of Research, Planning, and Evaluation.

Chapter 241 of the Laws of 1974 provides for aid to elementary and secondary education for 1974-75. This legislation contains departures from previous aid legislation. New criteria are introduced for calculating the "total aidable pupil units" which a district can claim. The new criteria are considerec to reflect an effort to provide…

Resits in Higher Education: Merely a Bar to Jump Over, or Do They Give a Pedagogical "Leg Up"?

ERIC Educational Resources Information Center

Proud, Steven

2015-01-01

When students fail an examination at the end of their first year, they are offered a resit examination, which they merely need to pass to progress into the second year. These resits anecdotally provide a dual purpose of testing that students have achieved the required level of attainment to progress, and incentivising additional effort. This paper…

Apollo/Skylab suit program-management systems study, volume 1

NASA Technical Reports Server (NTRS)

Mcniff, M.

1974-01-01

A management systems study for future spacesuit programs was conducted to assess past suit program requirements and management systems in addition to new and modified systems in order to identify the most cost effective methods for use during future spacesuit programs. The effort and its findings concerned the development and production of all hardware ranging from crew protective gear to total launch vehicles.

Li-Ion Electrolytes with Improved Safety and Tolerance to High-Voltage Systems

NASA Technical Reports Server (NTRS)

Smart, Marshall C.; Bugga, Ratnakumar V.; Prakash, Surya; Krause, Frederick C.

2013-01-01

Given that lithium-ion (Li-ion) technology is the most viable rechargeable energy storage device for near-term applications, effort has been devoted to improving the safety characteristics of this system. Therefore, extensive effort has been devoted to developing nonflammable electrolytes to reduce the flammability of the cells/battery. A number of promising electrolytes have been developed incorporating flame-retardant additives, and have been shown to have good performance in a number of systems. However, these electrolyte formulations did not perform well when utilizing carbonaceous anodes with the high-voltage materials. Thus, further development was required to improve the compatibility. A number of Li-ion battery electrolyte formulations containing a flame-retardant additive [i.e., triphenyl phosphate (TPP)] were developed and demonstrated in high-voltage systems. These electrolytes include: (1) formulations that incorporate varying concentrations of the flame-retardant additive (from 5 to 15%), (2) the use of mono-fluoroethylene carbonate (FEC) as a co-solvent, and (3) the use of LiBOB as an electrolyte additive intended to improve the compatibility with high-voltage systems. Thus, improved safety has been provided without loss of performance in the high-voltage, high-energy system.

Reliability Issues in Stirling Radioisotope Power Systems

NASA Technical Reports Server (NTRS)

Schreiber, Jeffrey; Shah, Ashwin

2005-01-01

Stirling power conversion is a potential candidate for use in a Radioisotope Power System (RPS) for space science missions because it offers a multifold increase in the conversion efficiency of heat to electric power and reduced requirement of radioactive material. Reliability of an RPS that utilizes Stirling power conversion technology is important in order to ascertain long term successful performance. Owing to long life time requirement (14 years), it is difficult to perform long-term tests that encompass all the uncertainties involved in the design variables of components and subsystems comprising the RPS. The requirement for uninterrupted performance reliability and related issues are discussed, and some of the critical areas of concern are identified. An overview of the current on-going efforts to understand component life, design variables at the component and system levels, and related sources and nature of uncertainties are also discussed. Current status of the 110 watt Stirling Radioisotope Generator (SRG110) reliability efforts is described. Additionally, an approach showing the use of past experience on other successfully used power systems to develop a reliability plan for the SRG110 design is outlined.

Reliability Issues in Stirling Radioisotope Power Systems

NASA Technical Reports Server (NTRS)

Shah, Ashwin R.; Schreiber, Jeffrey G.

2004-01-01

Stirling power conversion is a potential candidate for use in a Radioisotope Power System (RPS) for space science missions because it offers a multifold increase in the conversion efficiency of heat to electric power and reduced requirement of radioactive material. Reliability of an RPS that utilizes Stirling power conversion technology is important in order to ascertain long term successful performance. Owing to long life time requirement (14 years), it is difficult to perform long-term tests that encompass all the uncertainties involved in the design variables of components and subsystems comprising the RPS. The requirement for uninterrupted performance reliability and related issues are discussed, and some of the critical areas of concern are identified. An overview of the current on-going efforts to understand component life, design variables at the component and system levels, and related sources and nature of uncertainties are also discussed. Current status of the 110 watt Stirling Radioisotope Generator (SRG110) reliability efforts is described. Additionally, an approach showing the use of past experience on other successfully used power systems to develop a reliability plan for the SRG110 design is outlined.

Using Additive Manufacturing to Print a CubeSat Propulsion System

NASA Technical Reports Server (NTRS)

Marshall, William M.

2015-01-01

CubeSats are increasingly being utilized for missions traditionally ascribed to larger satellites CubeSat unit (1U) defined as 10 cm x 10 cm x 11 cm. Have been built up to 6U sizes. CubeSats are typically built up from commercially available off-the-shelf components, but have limited capabilities. By using additive manufacturing, mission specific capabilities (such as propulsion), can be built into a system. This effort is part of STMD Small Satellite program Printing the Complete CubeSat. Interest in propulsion concepts for CubeSats is rapidly gaining interest-Numerous concepts exist for CubeSat scale propulsion concepts. The focus of this effort is how to incorporate into structure using additive manufacturing. End-use of propulsion system dictates which type of system to develop-Pulse-mode RCS would require different system than a delta-V orbital maneuvering system. Team chose an RCS system based on available propulsion systems and feasibility of printing using a materials extrusion process. Initially investigated a cold-gas propulsion system for RCS applications-Materials extrusion process did not permit adequate sealing of part to make this a functional approach.

Reducing codon redundancy and screening effort of combinatorial protein libraries created by saturation mutagenesis.

PubMed

Kille, Sabrina; Acevedo-Rocha, Carlos G; Parra, Loreto P; Zhang, Zhi-Gang; Opperman, Diederik J; Reetz, Manfred T; Acevedo, Juan Pablo

2013-02-15

Saturation mutagenesis probes define sections of the vast protein sequence space. However, even if randomization is limited this way, the combinatorial numbers problem is severe. Because diversity is created at the codon level, codon redundancy is a crucial factor determining the necessary effort for library screening. Additionally, due to the probabilistic nature of the sampling process, oversampling is required to ensure library completeness as well as a high probability to encounter all unique variants. Our trick employs a special mixture of three primers, creating a degeneracy of 22 unique codons coding for the 20 canonical amino acids. Therefore, codon redundancy and subsequent screening effort is significantly reduced, and a balanced distribution of codon per amino acid is achieved, as demonstrated exemplarily for a library of cyclohexanone monooxygenase. We show that this strategy is suitable for any saturation mutagenesis methodology to generate less-redundant libraries.

Is overall similarity classification less effortful than single-dimension classification?

PubMed

Wills, Andy J; Milton, Fraser; Longmore, Christopher A; Hester, Sarah; Robinson, Jo

2013-01-01

It is sometimes argued that the implementation of an overall similarity classification is less effortful than the implementation of a single-dimension classification. In the current article, we argue that the evidence securely in support of this view is limited, and report additional evidence in support of the opposite proposition--overall similarity classification is more effortful than single-dimension classification. Using a match-to-standards procedure, Experiments 1A, 1B and 2 demonstrate that concurrent load reduces the prevalence of overall similarity classification, and that this effect is robust to changes in the concurrent load task employed, the level of time pressure experienced, and the short-term memory requirements of the classification task. Experiment 3 demonstrates that participants who produced overall similarity classifications from the outset have larger working memory capacities than those who produced single-dimension classifications initially, and Experiment 4 demonstrates that instructions to respond meticulously increase the prevalence of overall similarity classification.

Biomechanical energy harvesting: generating electricity during walking with minimal user effort.

PubMed

Donelan, J M; Li, Q; Naing, V; Hoffer, J A; Weber, D J; Kuo, A D

2008-02-08

We have developed a biomechanical energy harvester that generates electricity during human walking with little extra effort. Unlike conventional human-powered generators that use positive muscle work, our technology assists muscles in performing negative work, analogous to regenerative braking in hybrid cars, where energy normally dissipated during braking drives a generator instead. The energy harvester mounts at the knee and selectively engages power generation at the end of the swing phase, thus assisting deceleration of the joint. Test subjects walking with one device on each leg produced an average of 5 watts of electricity, which is about 10 times that of shoe-mounted devices. The cost of harvesting-the additional metabolic power required to produce 1 watt of electricity-is less than one-eighth of that for conventional human power generation. Producing substantial electricity with little extra effort makes this method well-suited for charging powered prosthetic limbs and other portable medical devices.

Moving belt radiator development status

NASA Technical Reports Server (NTRS)

White, K. Alan

1988-01-01

Development of the Moving Belt Radiator (MBR) as an advanced space radiator concept is discussed. The ralative merits of Solid Belt (SBR), Liquid Belt (LBR), and Hybrid Belt (HBR) Radiators are described. Analytical and experimental efforts related to the dynamics of a rotating belt in microgravity are reviewed. The development of methods for transferring heat to the moving belt is discussed, and the results from several experimental investigations are summarized. Limited efforts related to the belt deployment and stowage, and to fabrication of a hybrid belt, are also discussed. Life limiting factors such as seal wear and micrometeroid resistance are identified. The results from various MBR point design studies for several power levels are compared with advanced Heat Pipe Radiator technology. MBR designs are shown to compare favorable at both 300 and 1000 K temperature levels. However, additional effort will be required to resolve critical technology issues and to demonstrate the advantage of MBR systems.

It takes a village: Stakeholder participation is essential to transforming science.

PubMed

Sullivan, Kristie

2016-10-01

Efforts toward replacing the use of animals in toxicology testing have begun to make significant headway in the last several years, due to co-operative and pragmatic efforts on the part of many stakeholders, and the public pressure that non-governmental advocacy organisations represent. Science-focused advocacy organisations have a unique role to play in these efforts, as they often have flexibility to adapt quickly to keep a project going and forge connections among different kinds of stakeholders to help encourage buy-in. This year, meaningful progress has been made, especially in regulatory laws and policies, which will lead to the replacement of animals in toxicology testing. In order to keep this momentum, we need to measure progress -- but this requires improved transparency and regular reporting of animal use. In addition, we should consider how strategies that have successfully reduced and replaced animal use in toxicology can be applied to basic biomedical research practices. 2016 FRAME.

Projections of costs, financing, and additional resource requirements for low- and lower middle-income country immunization programs over the decade, 2011-2020.

PubMed

Gandhi, Gian; Lydon, Patrick; Cornejo, Santiago; Brenzel, Logan; Wrobel, Sandra; Chang, Hugh

2013-04-18

The Decade of Vaccines Global Vaccine Action Plan has outlined a set of ambitious goals to broaden the impact and reach of immunization across the globe. A projections exercise has been undertaken to assess the costs, financing availability, and additional resource requirements to achieve these goals through the delivery of vaccines against 19 diseases across 94 low- and middle-income countries for the period 2011-2020. The exercise draws upon data from existing published and unpublished global forecasts, country immunization plans, and costing studies. A combination of an ingredients-based approach and use of approximations based on past spending has been used to generate vaccine and non-vaccine delivery costs for routine programs, as well as supplementary immunization activities (SIAs). Financing projections focused primarily on support from governments and the GAVI Alliance. Cost and financing projections are presented in constant 2010 US dollars (US$). Cumulative total costs for the decade are projected to be US$57.5 billion, with 85% for routine programs and the remaining 15% for SIAs. Delivery costs account for 54% of total cumulative costs, and vaccine costs make up the remainder. A conservative estimate of total financing for immunization programs is projected to be $34.3 billion over the decade, with country governments financing 65%. These projections imply a cumulative funding gap of $23.2 billion. About 57% of the total resources required to close the funding gap are needed just to maintain existing programs and scale up other currently available vaccines (i.e., before adding in the additional costs of vaccines still in development). Efforts to mobilize additional resources, manage program costs, and establish mutual accountability between countries and development partners will all be necessary to ensure the goals of the Decade of Vaccines are achieved. Establishing or building on existing mechanisms to more comprehensively track resources and commitments for immunization will help facilitate these efforts. Copyright © 2013 Elsevier Ltd. All rights reserved.

Food Service and Nutrition for the Space Station

NASA Technical Reports Server (NTRS)

Sauer, R. L. (Editor)

1985-01-01

The proceedings of the Workshop on Food Service and Nutrition for the Space Station, held in Houston, Texas, on April 10 and 11, 1984 was given. The workshop was attended by experts in food technology from industry, government, and academia. Following a general definition of unique space flight requirements, oral presentations were made on state of the art food technology with the objective of using this technology to support the space flight requirements. Numerous areas are identified which in the opinion of the conferees, would have space flight application. But additional effort, evaluation, or testing to include Shuttle inflight testing will be required for the technology to be applied to the Space Station.

Cost analysis of oxygen recovery systems

NASA Technical Reports Server (NTRS)

Yakut, M. M.

1973-01-01

Report is made of the cost analysis of four leading oxygen recovery subsystems which include two carbon dioxide reduction subsystems and two water electrolysis subsystems, namely, the solid polymer electrolyte and the circulating KOH electrolyte. The four oxygen recovery systems were quantitatively evaluated. System characteristics, including process flows, performance, and physical characteristics were also analyzed. Additionally, the status of development of each of the systems considered and the required advance technology efforts required to bring conceptual and/or pre-prototype hardware to an operational prototype status were defined. Intimate knowledge of the operations, development status, and capabilities of the systems to meet space mission requirements were found to be essential in establishing the cost estimating relationships for advanced life support systems.

Space Station tethered waste disposal

NASA Technical Reports Server (NTRS)

Rupp, Charles C.

1988-01-01

The Shuttle Transportation System (STS) launches more payload to the Space Station than can be returned creating an accumulation of waste. Several methods of deorbiting the waste are compared including an OMV, solid rocket motors, and a tether system. The use of tethers is shown to offer the unique potential of having a net savings in STS launch requirement. Tether technology is being developed which can satisfy the deorbit requirements but additional effort is required in waste processing, packaging, and container design. The first step in developing this capability is already underway in the Small Expendable Deployer System program. A developmental flight test of a tether initiated recovery system is seen as the second step in the evolution of this capability.

Chapter 3 innovations in the en route care of combat casualties.

PubMed

Hatzfeld, Jennifer J; Dukes, Susan; Bridges, Elizabeth

2014-01-01

The en route care environment is dynamic and requires constant innovation to ensure appropriate nursing care for combat casualties. Building on experiences in Iraq and Afghanistan, there have been tremendous innovations in the process of transporting patients, including the movement of patients with spinal injuries. Advances have also been made in pain management and noninvasive monitoring, particularly for trauma and surgical patients requiring close monitoring of their hemodynamic and perfusion status. In addition to institutionalizing these innovations, future efforts are needed to eliminate secondary insults to patients with traumatic brain injuries and technologies to provide closed-loop sedation and ventilation.

Orbital Transfer Vehicle (OTV) engine study. Phase A: Extension

NASA Technical Reports Server (NTRS)

Sobin, A. J.

1980-01-01

The current Phase A-Extension of the OTV engine study program aims to provide additional expander and staged combustion cycle data that will lead to design definition of the OTV engine. The proposed program effort seeks to optimize the expander cycle engine concept (consistent with identified OTV engine requirements), investigate the feasibility of kitting the staged combustion cycle engine to provide extended thrust operation, and conduct in-depth analysis of development risk, crew safety, and reliability for both cycles. Additional tasks address the costing of a 10/K thrust expander cycle engine and support of OTV systems study contractors.

Experimental comparison of residual stresses for a thermomechanical model for the simulation of selective laser melting

DOE PAGES

Hodge, N. E.; Ferencz, R. M.; Vignes, R. M.

2016-05-30

Selective laser melting (SLM) is an additive manufacturing process in which multiple, successive layers of metal powders are heated via laser in order to build a part. Modeling of SLM requires consideration of the complex interaction between heat transfer and solid mechanics. Here, the present work describes the authors initial efforts to validate their first generation model. In particular, the comparison of model-generated solid mechanics results, including both deformation and stresses, is presented. Additionally, results of various perturbations of the process parameters and modeling strategies are discussed.

Development of new Dutch Elm disease-tolerant selections for restoration of the American Elm in urban and forested landscapes

Treesearch

C.C. Pinchot; C.E. Flower; K.S. Knight; C. Marks; R. Minocha; D. Lesser; K. Woeste; P.G. Schaberg; B. Baldwin; D.M. Delatte; T.D. Fox; N. Hayes-Plazolles; B. Held; K. Lehtoma; S. Long; S. Mattix; A. Sipes; J.M. Slavicek

2017-01-01

The goal of our research and development efforts is to restore American elm (Ulmus americana) as a species in both natural and urban landscapes. Accomplishing this goal requires identification/generation of additional American elm cultivars that are tolerant to Dutch elm disease (DED) caused by Ophiostoma ulmi and O. novo-ulmi, and development of methods to reintroduce...

The Enviornmental Impact of Electrical Power Generation: Nuclear and Fossil. A Minicourse for Secondary Schools and Adult Education. Text.

ERIC Educational Resources Information Center

McDermott, John J., Ed.

This course, developed for use in secondary and adult education, is an effort to describe the cost-benefit ratio of the various methods of generation of electrical power in an era when the requirement for additional sources of power is growing at an ever-increasing rate and environmental protection is a major concern. This course was written and…

Open-source software: not quite endsville.

PubMed

Stahl, Matthew T

2005-02-01

Open-source software will never achieve ubiquity. There are environments in which it simply does not flourish. By its nature, open-source development requires free exchange of ideas, community involvement, and the efforts of talented and dedicated individuals. However, pressures can come from several sources that prevent this from happening. In addition, openness and complex licensing issues invite misuse and abuse. Care must be taken to avoid the pitfalls of open-source software.

U.S. Economic Debt Crisis Solutions: Adjusting Army Manpower

DTIC Science & Technology

2012-02-27

leaders must lower the reliance on Army manpower in responding to global issues while working to refocus the diplomatic, informational and economic...as many former Presidents, saw the utility and correspondingly endorsed the need to lead with diplomatic efforts in confronting global issues and 19...national power are often seen as a balancing act in addressing global issues , any reduction or addition to one element requires consideration of a

Advances in MRSA drug discovery: where are we and where do we need to be?

PubMed

Kurosu, Michio; Siricilla, Shajila; Mitachi, Katsuhiko

2013-09-01

Methicillin-resistant Staphylococcus aureus (MRSA) have been on the increase during the past decade, due to the steady growth of the elderly and immunocompromised patients, and the emergence of multidrug-resistant (MDR) bacterial strains. Although there are a limited number of anti-MRSA drugs available, a number of different combination antimicrobial drug regimens have been used to treat serious MRSA infections. Thus, the addition of several new antistaphylococcal drugs into clinical practice should broaden clinician's therapeutic options. As MRSA is one of the most common and problematic bacteria associated with increasing antimicrobial resistance, continuous efforts for the discovery of lead compounds as well as development of alternative therapies and faster diagnostics are required. This article summarizes the FDA-approved drugs to treat MRSA infections, the drugs in clinical trials, and the drug leads for MRSA and related Gram-positive bacterial infections. In addition, the article discusses the mode of action of antistaphylococcal molecules and the resistant mechanisms of some molecules. The number of pipeline drugs presently undergoing clinical trials is not particularly encouraging. There are limited and rather expensive therapeutic options for MRSA infections in the critically ill. Further research efforts are required for effective phage therapy on MRSA infections in clinical use, which seem to be attractive therapeutic options for the future.

Development of the EarthChem Geochronology and Thermochronology database: Collaboration of the EarthChem and EARTHTIME efforts

NASA Astrophysics Data System (ADS)

Walker, J. D.; Ash, J. M.; Bowring, J.; Bowring, S. A.; Deino, A. L.; Kislitsyn, R.; Koppers, A. A.

2009-12-01

One of the most onerous tasks in rigorous development of data reporting and databases for geochronological and thermochronological studies is to fully capture all of the metadata needed to completely document both the analytical work as well as the interpretation effort. This information is available in the data reduction programs used by researchers, but has proven difficult to harvest into either publications or databases. For this reason, the EarthChem and EARTHTIME efforts are collaborating to foster the next generation of data management and discovery for age information by integrating data reporting with data reduction. EarthChem is a community-driven effort to facilitate the discovery, access, and preservation of geochemical data of all types and to support research and enable new and better science. EARTHTIME is also a community-initiated project whose aim is to foster the next generation of high-precision geochronology and thermochoronology. In addition, collaboration with the CRONUS effort for cosmogenic radionuclides is in progress. EarthChem workers have met with groups working on the Ar-Ar, U-Pb, and (U-Th)/He systems to establish data reporting requirements as well as XML schemas to be used for transferring data from reduction programs to database. At present, we have prototype systems working for the U-Pb_Redux, ArArCalc, MassSpec, and Helios programs. In each program, the user can select to upload data and metadata to the GEOCHRON system hosted at EarthChem. There are two additional requirements for upload. The first is having a unique identifier (IGSN) obtained either manually or via web services contained within the reduction program from the SESAR system. The second is that the user selects whether the sample is to be available for discovery (public) or remain hidden (private). Search for data at the GEOCHRON portal can be done using age, method, mineral, or location parameters. Data can be downloaded in the full XML format for ingestion back into the reduction program or as abbreviated tables.

Development and analysis of SCR requirements tables for system scenarios

NASA Technical Reports Server (NTRS)

Callahan, John R.; Morrison, Jeffery L.

1995-01-01

We describe the use of scenarios to develop and refine requirement tables for parts of the Earth Observing System Data and Information System (EOSDIS). The National Aeronautics and Space Administration (NASA) is developing EOSDIS as part of its Mission-To-Planet-Earth (MTPE) project to accept instrument/platform observation requests from end-user scientists, schedule and perform requested observations of the Earth from space, collect and process the observed data, and distribute data to scientists and archives. Current requirements for the system are managed with tools that allow developers to trace the relationships between requirements and other development artifacts, including other requirements. In addition, the user community (e.g., earth and atmospheric scientists), in conjunction with NASA, has generated scenarios describing the actions of EOSDIS subsystems in response to user requests and other system activities. As part of a research effort in verification and validation techniques, this paper describes our efforts to develop requirements tables from these scenarios for the EOSDIS Core System (ECS). The tables specify event-driven mode transitions based on techniques developed by the Naval Research Lab's (NRL) Software Cost Reduction (SCR) project. The SCR approach has proven effective in specifying requirements for large systems in an unambiguous, terse format that enhance identification of incomplete and inconsistent requirements. We describe development of SCR tables from user scenarios and identify the strengths and weaknesses of our approach in contrast to the requirements tracing approach. We also evaluate the capabilities of both approach to respond to the volatility of requirements in large, complex systems.

Space Fence PDR Concept Development Phase

NASA Astrophysics Data System (ADS)

Haines, L.; Phu, P.

2011-09-01

The Space Fence, a major Air Force acquisition program, will become the dominant low-earth orbit uncued sensor in the space surveillance network (SSN). Its primary objective is to provide a 24/7 un-cued capability to find, fix, and track small objects in low earth orbit to include emerging and evolving threats, as well as the rapidly growing population of orbital debris. Composed of up to two geographically dispersed large-scale S-band phased array radars, this new system-of-systems concept will provide comprehensive Space Situational Awareness through net-centric operations and integrated decision support. Additionally, this program will facilitate cost saving force structure changes in the SSN, specifically including the decommissioning of very-high frequency VHF Air Force Space Surveillance System (AFSSS). The Space Fence Program Office entered a Preliminary Design Review (PDR) concept development phase in January 2011 to achieve the delivery of the Initial Operational Capability (IOC) expected in FY17. Two contractors were awarded to perform preliminary system design, conduct radar performance analyses and evaluations, and develop a functional PDR radar system prototype. The key objectives for the Phase A PDR effort are to reduce Space Fence total program technical, cost, schedule, and performance risk. The overall program objective is to achieve a preliminary design that demonstrates sufficient technical and manufacturing maturity and that represents a low risk, affordable approach to meet the Space Fence Technical Requirements Document (TRD) requirements for the final development and production phase to begin in 3QFY12. This paper provides an overview of the revised Space Fence program acquisition strategy for the Phase-A PDR phase to IOC, the overall program milestones and major technical efforts. In addition, the key system trade studies and modeling/simulation efforts undertaken during the System Design Requirement (SDR) phase to address and mitigate technical challenges of the Space Fence System will also be discussed. Examples include radar system optimization studies, modeling and simulation for system performance assessment, investigation of innovative Astrodynamics algorithms for initial orbit determination and observation correlation.

A review of radiation countermeasures focusing on injury-specific medicinals and regulatory approval status: part III. Countermeasures under early stages of development along with 'standard of care' medicinal and procedures not requiring regulatory approval for use.

PubMed

Singh, Vijay K; Hanlon, Briana K; Santiago, Paola T; Seed, Thomas M

2017-09-01

Terrorist attacks, with their intent to maximize psychological and economic damage as well as inflicting sickness and death on given targeted populations, are an ever-growing worldwide concern in government and public sectors as they become more frequent, violent, and sensational. If given the chance, it is likely that terrorists will use radiological or nuclear weapons. To thwart these sinister efforts, both physical and medical countermeasures against these weapons are currently being researched and developed so that they can be utilized by the first responders, military, and medical providers alike. This is the third article of a three-part series in which we have reviewed additional radiation countermeasures that are currently under early preclinical phases of development using largely animal models and have listed and discussed clinical support measures, including agents used for radiation-induced emesis, as well as countermeasures not requiring Food and Drug Administration approval. Despite the significant progress that has been made in this area during the last several years, additional effort is needed in order to push promising new agents, currently under development, through the regulatory pipeline. This pipeline for new promising drugs appears to be unreasonably slow and cumbersome; possible reasons for this inefficiency are briefly discussed. Significant and continued effort needs to be afforded to this research and development area, as to date, there is no approved radioprotector that can be administered prior to high dose radiation exposure. This represents a very significant, unmet medical need and a significant security issue. A large number of agents with potential to interact with different biological targets are under development. In the next few years, several additional radiation countermeasures will likely receive Food and Drug Administration approval, increasing treatment options for victims exposed to unwanted ionizing irradiation.

Low Cost Upper Stage-Class Propulsion (LCUSP)

NASA Technical Reports Server (NTRS)

Vickers, John

2015-01-01

NASA is making space exploration more affordable and viable by developing and utilizing innovative manufacturing technologies. Technology development efforts at NASA in propulsion are committed to continuous innovation of design and manufacturing technologies for rocket engines in order to reduce the cost of NASA's journey to Mars. The Low Cost Upper Stage-Class Propulsion (LCUSP) effort will develop and utilize emerging Additive Manufacturing (AM) to significantly reduce the development time and cost for complex rocket propulsion hardware. Benefit of Additive Manufacturing (3-D Printing) Current rocket propulsion manufacturing techniques are costly and have lengthy development times. In order to fabricate rocket engines, numerous complex parts made of different materials are assembled in a way that allow the propellant to collect heat at the right places to drive the turbopump and simultaneously keep the thrust chamber from melting. The heat conditioned fuel and oxidizer come together and burn inside the combustion chamber to provide thrust. The efforts to make multiple parts precisely fit together and not leak after experiencing cryogenic temperatures on one-side and combustion temperatures on the other is quite challenging. Additive manufacturing has the potential to significantly reduce the time and cost of making rocket parts like the copper liner and Nickel-alloy jackets found in rocket combustion chambers where super-cold cryogenic propellants are heated and mixed to the extreme temperatures needed to propel rockets in space. The Selective Laser Melting (SLM) machine fuses 8,255 layers of copper powder to make a section of the chamber in 10 days. Machining an equivalent part and assembling it with welding and brazing techniques could take months to accomplish with potential failures or leaks that could require fixes. The design process is also enhanced since it does not require the 3D model to be converted to 2-D drawings. The design and fabrication process can be sped up and improved with fewer errors to be accomplished in weeks instead of months.

Evaluation of Canisterized Foams and Evaluation of Radiation Hardened Foams for D&D Activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nicholson, J. C.

The introduction of polyurethane foams has previously been examined elsewhere within the DOE complex with regards to decontamination and decommissioning (D&D) activities, though its use has been prohibited as a result of excessive heat generation and flammability concerns per the safety basis. Should these foams be found compatible with respect to the facility safety basis requirements, D&D work involving large void containing structures such as gloveboxes could be eased through the fixation of residual contamination after decontamination efforts have concluded. To this end, SRNL embarked on a characterization of commercial epoxy foams to identify the characteristics that would be mostmore » important to safety basis requirements. Through SRNL’s efforts, the performance of commercial two-part epoxy foams was evaluated for their foaming characteristics, temperature profiles, loading capability with high-Z (high density) additives, and applicability for shielding gamma emission from isotopes including; Am-241, Cs-137, and Co-60. It was found that these foams are capable of encapsulation of a desired volume, though the ideal and experimental expansion coefficients were found to differ. While heat is generated during the reaction, no samples generated heat above 70 °C. Of the down–selected materials, heating was on the order of 40 °C for the flexible foam and 60 °C for the rigid foam. Both were found to return to room temperature after 20 minutes regardless of the volume of foam cast. It was also found that the direct introduction of high-Z additives were capable of attenuating 98% of Am-241 gamma signal, 16% of Cs-137 signal, and 9.5% of Co-60 signal at 1:1 loading capacities of total liquid constituent weight to additive weight. These efforts are currently being reviewed for the ASTM January 2017 subcommittee discussions to address the lack of test methods and standards regarding these materials with respect to D&D environments.« less

Strategies to Build Readiness in Community Mobilization Efforts for Implementation in a Multi-Year Teen Pregnancy Prevention Initiative.

PubMed

Bhuiya, Nazmim; House, L Duane; Desmarais, Jeffrey; Fletcher, Erica; Conlin, Maeve; Perez-McAdoo, Sarah; Waggett, Jessica; Tendulkar, Shalini A

2017-03-01

This paper describes an assessment of community readiness to implement a community-wide teen pregnancy prevention initiative, Youth First, and presents strategies used to enhance this readiness as informed by the assessment. Twenty-five community stakeholder interviews were conducted to assess four domains of readiness: (1) attitudes, perception, and knowledge of teen pregnancy; (2) perceived level of readiness; (3) resources, existing and current efforts; and (4) leadership. Interview transcripts were coded and analyzed to identify key themes. Stakeholders acknowledged teen pregnancy as an issue but lacked contextual information. They also perceived the community as ready to address the issue and recognized some organizations already championing efforts. However, many key players were not involved, and ongoing data collection to assess teen pregnancy and prevention efforts was limited. Though many stakeholders were ready to engage in teen pregnancy prevention efforts, they required additional information and training to appropriately address the issue. In response to the assessment findings, several strategies were applied to address readiness and build Youth First partners' capacity to implement the community-wide initiative. Thus, to successfully implement community-wide prevention efforts, it is valuable to assess the level of community readiness to address health issues. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Sensitivity to Mental Effort and Test-Retest Reliability of Heart Rate Variability Measures in Healthy Seniors

PubMed Central

Mukherjee, Shalini; Yadav, Rajeev; Yung, Iris; Zajdel, Daniel P.; Oken, Barry S.

2011-01-01

Objectives To determine 1) whether heart rate variability (HRV) was a sensitive and reliable measure in mental effort tasks carried out by healthy seniors and 2) whether non-linear approaches to HRV analysis, in addition to traditional time and frequency domain approaches were useful to study such effects. Methods Forty healthy seniors performed two visual working memory tasks requiring different levels of mental effort, while ECG was recorded. They underwent the same tasks and recordings two weeks later. Traditional and 13 non-linear indices of HRV including Poincaré, entropy and detrended fluctuation analysis (DFA) were determined. Results Time domain (especially mean R-R interval/RRI), frequency domain and, among nonlinear parameters- Poincaré and DFA were the most reliable indices. Mean RRI, time domain and Poincaré were also the most sensitive to different mental effort task loads and had the largest effect size. Conclusions Overall, linear measures were the most sensitive and reliable indices to mental effort. In non-linear measures, Poincaré was the most reliable and sensitive, suggesting possible usefulness as an independent marker in cognitive function tasks in healthy seniors. Significance A large number of HRV parameters was both reliable as well as sensitive indices of mental effort, although the simple linear methods were the most sensitive. PMID:21459665

Listening Effort: How the Cognitive Consequences of Acoustic Challenge Are Reflected in Brain and Behavior

PubMed Central

2018-01-01

Everyday conversation frequently includes challenges to the clarity of the acoustic speech signal, including hearing impairment, background noise, and foreign accents. Although an obvious problem is the increased risk of making word identification errors, extracting meaning from a degraded acoustic signal is also cognitively demanding, which contributes to increased listening effort. The concepts of cognitive demand and listening effort are critical in understanding the challenges listeners face in comprehension, which are not fully predicted by audiometric measures. In this article, the authors review converging behavioral, pupillometric, and neuroimaging evidence that understanding acoustically degraded speech requires additional cognitive support and that this cognitive load can interfere with other operations such as language processing and memory for what has been heard. Behaviorally, acoustic challenge is associated with increased errors in speech understanding, poorer performance on concurrent secondary tasks, more difficulty processing linguistically complex sentences, and reduced memory for verbal material. Measures of pupil dilation support the challenge associated with processing a degraded acoustic signal, indirectly reflecting an increase in neural activity. Finally, functional brain imaging reveals that the neural resources required to understand degraded speech extend beyond traditional perisylvian language networks, most commonly including regions of prefrontal cortex, premotor cortex, and the cingulo-opercular network. Far from being exclusively an auditory problem, acoustic degradation presents listeners with a systems-level challenge that requires the allocation of executive cognitive resources. An important point is that a number of dissociable processes can be engaged to understand degraded speech, including verbal working memory and attention-based performance monitoring. The specific resources required likely differ as a function of the acoustic, linguistic, and cognitive demands of the task, as well as individual differences in listeners’ abilities. A greater appreciation of cognitive contributions to processing degraded speech is critical in understanding individual differences in comprehension ability, variability in the efficacy of assistive devices, and guiding rehabilitation approaches to reducing listening effort and facilitating communication. PMID:28938250

Listening Effort: How the Cognitive Consequences of Acoustic Challenge Are Reflected in Brain and Behavior.

PubMed

Peelle, Jonathan E

Everyday conversation frequently includes challenges to the clarity of the acoustic speech signal, including hearing impairment, background noise, and foreign accents. Although an obvious problem is the increased risk of making word identification errors, extracting meaning from a degraded acoustic signal is also cognitively demanding, which contributes to increased listening effort. The concepts of cognitive demand and listening effort are critical in understanding the challenges listeners face in comprehension, which are not fully predicted by audiometric measures. In this article, the authors review converging behavioral, pupillometric, and neuroimaging evidence that understanding acoustically degraded speech requires additional cognitive support and that this cognitive load can interfere with other operations such as language processing and memory for what has been heard. Behaviorally, acoustic challenge is associated with increased errors in speech understanding, poorer performance on concurrent secondary tasks, more difficulty processing linguistically complex sentences, and reduced memory for verbal material. Measures of pupil dilation support the challenge associated with processing a degraded acoustic signal, indirectly reflecting an increase in neural activity. Finally, functional brain imaging reveals that the neural resources required to understand degraded speech extend beyond traditional perisylvian language networks, most commonly including regions of prefrontal cortex, premotor cortex, and the cingulo-opercular network. Far from being exclusively an auditory problem, acoustic degradation presents listeners with a systems-level challenge that requires the allocation of executive cognitive resources. An important point is that a number of dissociable processes can be engaged to understand degraded speech, including verbal working memory and attention-based performance monitoring. The specific resources required likely differ as a function of the acoustic, linguistic, and cognitive demands of the task, as well as individual differences in listeners' abilities. A greater appreciation of cognitive contributions to processing degraded speech is critical in understanding individual differences in comprehension ability, variability in the efficacy of assistive devices, and guiding rehabilitation approaches to reducing listening effort and facilitating communication.

Brain and effort: brain activation and effort-related working memory in healthy participants and patients with working memory deficits.

PubMed

Engström, Maria; Landtblom, Anne-Marie; Karlsson, Thomas

2013-01-01

Despite the interest in the neuroimaging of working memory, little is still known about the neurobiology of complex working memory in tasks that require simultaneous manipulation and storage of information. In addition to the central executive network, we assumed that the recently described salience network [involving the anterior insular cortex (AIC) and the anterior cingulate cortex (ACC)] might be of particular importance to working memory tasks that require complex, effortful processing. Healthy participants (n = 26) and participants suffering from working memory problems related to the Kleine-Levin syndrome (KLS) (a specific form of periodic idiopathic hypersomnia; n = 18) participated in the study. Participants were further divided into a high- and low-capacity group, according to performance on a working memory task (listening span). In a functional magnetic resonance imaging (fMRI) study, participants were administered the reading span complex working memory task tapping cognitive effort. The fMRI-derived blood oxygen level dependent (BOLD) signal was modulated by (1) effort in both the central executive and the salience network and (2) capacity in the salience network in that high performers evidenced a weaker BOLD signal than low performers. In the salience network there was a dichotomy between the left and the right hemisphere; the right hemisphere elicited a steeper increase of the BOLD signal as a function of increasing effort. There was also a stronger functional connectivity within the central executive network because of increased task difficulty. The ability to allocate cognitive effort in complex working memory is contingent upon focused resources in the executive and in particular the salience network. Individual capacity during the complex working memory task is related to activity in the salience (but not the executive) network so that high-capacity participants evidence a lower signal and possibly hence a larger dynamic response.

Brain and effort: brain activation and effort-related working memory in healthy participants and patients with working memory deficits

PubMed Central

Engström, Maria; Landtblom, Anne-Marie; Karlsson, Thomas

2013-01-01

Despite the interest in the neuroimaging of working memory, little is still known about the neurobiology of complex working memory in tasks that require simultaneous manipulation and storage of information. In addition to the central executive network, we assumed that the recently described salience network [involving the anterior insular cortex (AIC) and the anterior cingulate cortex (ACC)] might be of particular importance to working memory tasks that require complex, effortful processing. Method: Healthy participants (n = 26) and participants suffering from working memory problems related to the Kleine–Levin syndrome (KLS) (a specific form of periodic idiopathic hypersomnia; n = 18) participated in the study. Participants were further divided into a high- and low-capacity group, according to performance on a working memory task (listening span). In a functional magnetic resonance imaging (fMRI) study, participants were administered the reading span complex working memory task tapping cognitive effort. Principal findings: The fMRI-derived blood oxygen level dependent (BOLD) signal was modulated by (1) effort in both the central executive and the salience network and (2) capacity in the salience network in that high performers evidenced a weaker BOLD signal than low performers. In the salience network there was a dichotomy between the left and the right hemisphere; the right hemisphere elicited a steeper increase of the BOLD signal as a function of increasing effort. There was also a stronger functional connectivity within the central executive network because of increased task difficulty. Conclusion: The ability to allocate cognitive effort in complex working memory is contingent upon focused resources in the executive and in particular the salience network. Individual capacity during the complex working memory task is related to activity in the salience (but not the executive) network so that high-capacity participants evidence a lower signal and possibly hence a larger dynamic response. PMID:23616756

The human subthalamic nucleus encodes the subjective value of reward and the cost of effort during decision-making.

PubMed

Zénon, Alexandre; Duclos, Yann; Carron, Romain; Witjas, Tatiana; Baunez, Christelle; Régis, Jean; Azulay, Jean-Philippe; Brown, Peter; Eusebio, Alexandre

2016-06-01

Adaptive behaviour entails the capacity to select actions as a function of their energy cost and expected value and the disruption of this faculty is now viewed as a possible cause of the symptoms of Parkinson's disease. Indirect evidence points to the involvement of the subthalamic nucleus-the most common target for deep brain stimulation in Parkinson's disease-in cost-benefit computation. However, this putative function appears at odds with the current view that the subthalamic nucleus is important for adjusting behaviour to conflict. Here we tested these contrasting hypotheses by recording the neuronal activity of the subthalamic nucleus of patients with Parkinson's disease during an effort-based decision task. Local field potentials were recorded from the subthalamic nucleus of 12 patients with advanced Parkinson's disease (mean age 63.8 years ± 6.8; mean disease duration 9.4 years ± 2.5) both OFF and ON levodopa while they had to decide whether to engage in an effort task based on the level of effort required and the value of the reward promised in return. The data were analysed using generalized linear mixed models and cluster-based permutation methods. Behaviourally, the probability of trial acceptance increased with the reward value and decreased with the required effort level. Dopamine replacement therapy increased the rate of acceptance for efforts associated with low rewards. When recording the subthalamic nucleus activity, we found a clear neural response to both reward and effort cues in the 1-10 Hz range. In addition these responses were informative of the subjective value of reward and level of effort rather than their actual quantities, such that they were predictive of the participant's decisions. OFF levodopa, this link with acceptance was weakened. Finally, we found that these responses did not index conflict, as they did not vary as a function of the distance from indifference in the acceptance decision. These findings show that low-frequency neuronal activity in the subthalamic nucleus may encode the information required to make cost-benefit comparisons, rather than signal conflict. The link between these neural responses and behaviour was stronger under dopamine replacement therapy. Our findings are consistent with the view that Parkinson's disease symptoms may be caused by a disruption of the processes involved in balancing the value of actions with their associated effort cost. © The Author (2016). Published by Oxford University Press on behalf of the Guarantors of Brain. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The human subthalamic nucleus encodes the subjective value of reward and the cost of effort during decision-making

PubMed Central

Zénon, Alexandre; Duclos, Yann; Carron, Romain; Witjas, Tatiana; Baunez, Christelle; Régis, Jean; Azulay, Jean-Philippe; Brown, Peter; Eusebio, Alexandre

2016-01-01

Adaptive behaviour entails the capacity to select actions as a function of their energy cost and expected value and the disruption of this faculty is now viewed as a possible cause of the symptoms of Parkinson’s disease. Indirect evidence points to the involvement of the subthalamic nucleus—the most common target for deep brain stimulation in Parkinson’s disease—in cost-benefit computation. However, this putative function appears at odds with the current view that the subthalamic nucleus is important for adjusting behaviour to conflict. Here we tested these contrasting hypotheses by recording the neuronal activity of the subthalamic nucleus of patients with Parkinson’s disease during an effort-based decision task. Local field potentials were recorded from the subthalamic nucleus of 12 patients with advanced Parkinson’s disease (mean age 63.8 years ± 6.8; mean disease duration 9.4 years ± 2.5) both OFF and ON levodopa while they had to decide whether to engage in an effort task based on the level of effort required and the value of the reward promised in return. The data were analysed using generalized linear mixed models and cluster-based permutation methods. Behaviourally, the probability of trial acceptance increased with the reward value and decreased with the required effort level. Dopamine replacement therapy increased the rate of acceptance for efforts associated with low rewards. When recording the subthalamic nucleus activity, we found a clear neural response to both reward and effort cues in the 1–10 Hz range. In addition these responses were informative of the subjective value of reward and level of effort rather than their actual quantities, such that they were predictive of the participant’s decisions. OFF levodopa, this link with acceptance was weakened. Finally, we found that these responses did not index conflict, as they did not vary as a function of the distance from indifference in the acceptance decision. These findings show that low-frequency neuronal activity in the subthalamic nucleus may encode the information required to make cost-benefit comparisons, rather than signal conflict. The link between these neural responses and behaviour was stronger under dopamine replacement therapy. Our findings are consistent with the view that Parkinson’s disease symptoms may be caused by a disruption of the processes involved in balancing the value of actions with their associated effort cost. PMID:27190012

Free Flight Rotorcraft Flight Test Vehicle Technology Development

NASA Technical Reports Server (NTRS)

Hodges, W. Todd; Walker, Gregory W.

1994-01-01

A rotary wing, unmanned air vehicle (UAV) is being developed as a research tool at the NASA Langley Research Center by the U.S. Army and NASA. This development program is intended to provide the rotorcraft research community an intermediate step between rotorcraft wind tunnel testing and full scale manned flight testing. The technologies under development for this vehicle are: adaptive electronic flight control systems incorporating artificial intelligence (AI) techniques, small-light weight sophisticated sensors, advanced telepresence-telerobotics systems and rotary wing UAV operational procedures. This paper briefly describes the system's requirements and the techniques used to integrate the various technologies to meet these requirements. The paper also discusses the status of the development effort. In addition to the original aeromechanics research mission, the technology development effort has generated a great deal of interest in the UAV community for related spin-off applications, as briefly described at the end of the paper. In some cases the technologies under development in the free flight program are critical to the ability to perform some applications.

Collaborative Information Technologies

NASA Astrophysics Data System (ADS)

Meyer, William; Casper, Thomas

1999-11-01

Significant effort has been expended to provide infrastructure and to facilitate the remote collaborations within the fusion community and out. Through the Office of Fusion Energy Science Information Technology Initiative, communication technologies utilized by the fusion community are being improved. The initial thrust of the initiative has been collaborative seminars and meetings. Under the initiative 23 sites, both laboratory and university, were provided with hardware required to remotely view, or project, documents being presented. The hardware is capable of delivering documents to a web browser, or to compatible hardware, over ESNET in an access controlled manner. The ability also exists for documents to originate from virtually any of the collaborating sites. In addition, RealNetwork servers are being tested to provide audio and/or video, in a non-interactive environment with MBONE providing two-way interaction where needed. Additional effort is directed at remote distributed computing, file systems, security, and standard data storage and retrieval methods. This work supported by DoE contract No. W-7405-ENG-48

Fatigue mechanisms in patients with cancer: effects of tumor necrosis factor and exercise on skeletal muscle

NASA Technical Reports Server (NTRS)

St Pierre, B. A.; Kasper, C. E.; Lindsey, A. M.

1992-01-01

Fatigue is a common adverse effect of cancer and its therapy. However, the specific mechanisms underlying cancer fatigue are unclear. One physiologic mechanism may involve changes in skeletal muscle protein stores or metabolite concentration. A reduction in skeletal muscle protein stores may result from endogenous tumor necrosis factor (TNF) or from TNF administered as antineoplastic therapy. This muscle wasting would require patients to exert an unusually high amount of effort to generate adequate contractile force during exercise performance or during extended periods of sitting or standing. This additional effort could result in the onset of fatigue. Additionally, cancer fatigue may develop or become exacerbated during exercise as a consequence of changes in the concentration of skeletal muscle metabolites. These biochemical alterations may interfere with force that is produced by the muscle contractile proteins. These physiologic changes may play a role in the decision to include exercise in the rehabilitation plans of patients with cancer. They also may affect ideas about fatigue.

Capitalizing on Education and Outreach (E/O) Expertise to Broaden Impacts (Invited)

NASA Astrophysics Data System (ADS)

Girguis, P. R.; Herren, C.; Decharon, A.

2010-12-01

Academic scientists have a number of avenues through which they can participate in education and outreach (E/O) programs to address the mandate for broader impacts. As a principal investigator (PI) at an R1 institution, I (Girguis) have both developed and participated in a variety of E/O programs that span the spectrum from ad hoc groups (e.g. informal high school internships in my laboratory) to regional efforts (e.g. Harvard’s Microbial Science Initiative) and national organizations (e.g. RIDGE 2000; Centers for Ocean Sciences Education Excellence, COSEE). Each of these E/O efforts required varying degrees of preparation and participation by my laboratory members (e.g. graduate students and postdoctoral researchers) and I, and yielded different outcomes and products. Ad hoc programs typically require a higher degree of effort on the part of the PI and have a high, though local, impact on the audience. These programs can be personally rewarding for the PI, who likely has played a major role in developing the program. In contrast, working with regional and national groups requires PIs to understand the nature of each program to successfully integrate within the existing structure. The net time and effort invested by scientists in larger-scale E/O efforts may be equal to that of ad hoc programs. However, interaction with high-quality program facilitators ensures that the outcomes are grounded in best educational practices and that outputs are educator-vetted, well maintained (online or through publications), and broadly disseminated. In addition, program facilitators also collect and analyze evaluation data to provide constructive feedback to PIs, enabling the latter to refine their presentation styles and content levels to improve future E/O efforts. Thus involvement with larger programs can effectively broaden one’s impact. During this presentation, we will present one scientist’s perspective on the advantages and limitations of these different modes of E/O, including specific examples from the past three years of working with COSEE-Ocean Systems. We will share “lessons learned” regarding the efficacy of these various modes of E/O, and will also discuss those factors that influence a PI’s decision to participate in E/O programs.

ANNIE - INTERACTIVE PROCESSING OF DATA BASES FOR HYDROLOGIC MODELS.

USGS Publications Warehouse

Lumb, Alan M.; Kittle, John L.

1985-01-01

ANNIE is a data storage and retrieval system that was developed to reduce the time and effort required to calibrate, verify, and apply watershed models that continuously simulate water quantity and quality. Watershed models have three categories of input: parameters to describe segments of a drainage area, linkage of the segments, and time-series data. Additional goals for ANNIE include the development of software that is easily implemented on minicomputers and some microcomputers and software that has no special requirements for interactive display terminals. Another goal is for the user interaction to be based on the experience of the user so that ANNIE is helpful to the inexperienced user and yet efficient and brief for the experienced user. Finally, the code should be designed so that additional hydrologic models can easily be added to ANNIE.

Optimizing Multiple Analyte Injections in Surface Plasmon Resonance Biosensors with Analytes having Different Refractive Index Increments

PubMed Central

Mehand, Massinissa Si; Srinivasan, Bala; De Crescenzo, Gregory

2015-01-01

Surface plasmon resonance-based biosensors have been successfully applied to the study of the interactions between macromolecules and small molecular weight compounds. In an effort to increase the throughput of these SPR-based experiments, we have already proposed to inject multiple compounds simultaneously over the same surface. When specifically applied to small molecular weight compounds, such a strategy would however require prior knowledge of the refractive index increment of each compound in order to correctly interpret the recorded signal. An additional experiment is typically required to obtain this information. In this manuscript, we show that through the introduction of an additional global parameter corresponding to the ratio of the saturating signals associated with each molecule, the kinetic parameters could be identified with similar confidence intervals without any other experimentation. PMID:26515024

DOE Office of Scientific and Technical Information (OSTI.GOV)

Busch, M.; Abgrall, N.; Alvis, S. I.

Here, the Majorana Collaboration is searching for the neutrinoless double-beta decay of the nucleus 76Ge. The Majorana Demonstrator is an array of germanium detectors deployed with the aim of implementing background reduction techniques suitable for a tonne scale 76Ge-based search (the LEGEND collaboration). In the Demonstrator, germanium detectors operate in an ultra-pure vacuum cryostat at 80 K. One special challenge of an ultra-pure environment is to develop reliable cables, connectors, and electronics that do not significantly contribute to the radioactive background of the experiment. This paper highlights the experimental requirements and how these requirements were met for the Majorana Demonstrator,more » including plans to upgrade the wiring for higher reliability in the summer of 2018. Also described are requirements for LEGEND R&D efforts underway to meet these additional requirements« less

Co-Optimization of Fuels and Engines (Co-Optima) -- Introduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrell, John T; Wagner, Robert; Holladay, John

The Co-Optimization of Fuels and Engines (Co-Optima) initiative is a U.S. Department of Energy (DOE) effort funded by both the Vehicle and Bioenergy Technology Offices. The overall goal of the effort is to identify the combinations of fuel properties and engine characteristics that maximize efficiency, independent of production pathway or fuel composition, and accelerate commercialization of these technologies. Multiple research efforts are underway focused on both spark-ignition and compression-ignition strategies applicable across the entire light, medium, and heavy-duty fleet. A key objective of Co-Optima's research is to identify new blendstocks that enhance current petroleum blending components, increase blendstock diversity, andmore » provide refiners with increased flexibility to blend fuels with the key properties required to optimize advanced internal combustion engines. In addition to fuels and engines R&D, the initiative is guided by analyses assessing the near-term commercial feasibility of new blendstocks based on economics, environmental performance, compatibility, and large-scale production viability. This talk will provide an overview of the Co-Optima effort.« less

Nonlinear Unsteady Aerodynamic Modeling Using Wind Tunnel and Computational Data

NASA Technical Reports Server (NTRS)

Murphy, Patrick C.; Klein, Vladislav; Frink, Neal T.

2016-01-01

Extensions to conventional aircraft aerodynamic models are required to adequately predict responses when nonlinear unsteady flight regimes are encountered, especially at high incidence angles and under maneuvering conditions. For a number of reasons, such as loss of control, both military and civilian aircraft may extend beyond normal and benign aerodynamic flight conditions. In addition, military applications may require controlled flight beyond the normal envelope, and civilian flight may require adequate recovery or prevention methods from these adverse conditions. These requirements have led to the development of more general aerodynamic modeling methods and provided impetus for researchers to improve both techniques and the degree of collaboration between analytical and experimental research efforts. In addition to more general mathematical model structures, dynamic test methods have been designed to provide sufficient information to allow model identification. This paper summarizes research to develop a modeling methodology appropriate for modeling aircraft aerodynamics that include nonlinear unsteady behaviors using both experimental and computational test methods. This work was done at Langley Research Center, primarily under the NASA Aviation Safety Program, to address aircraft loss of control, prevention, and recovery aerodynamics.

Medicare and Medicaid programs; hospital conditions of participation; provider agreements and supplier approval--HCFA. Proposed rule.

PubMed

1997-12-19

This proposed rule would revise the requirements that hospitals must meet to participate in the Medicare and Medicaid programs. The revised requirements focus on patients care and the outcomes of that care, reflect a cross-functional view of patient treatment, encourage flexibility in meeting quality standards, and eliminate unnecessary procedural requirements. These changes are necessary to reflect advances in patient care delivery and quality assessment practices since the requirements were last revised in 1986. They are also an integral part of the Administration's efforts to achieve broad-based improvements in the quality of care furnished through Federal programs and in the measurement of that care, while at the same time reducing procedural burdens on providers. In addition, in an effort to increase the number of organ donations, we are proposing changes in the interaction between hospitals and organ procurement organizations. The proposed rule also would specify that HCFA may terminate the participation agreement of a hospital, skilled nursing facility, home health agency, or other provider if the provider refuses to allow access to its facilities, or examination of its operations or records, by or on behalf of HCFA, as necessary to verify that it is complying with the Medicare law and regulations and the terms of its provider agreement.

Raising awareness of the importance of funding for tuberculosis small-molecule research.

PubMed

Riccardi, Giovanna; Old, Iain G; Ekins, Sean

2017-03-01

Tuberculosis (TB) drug discovery research is hampered by several factors, but as in many research areas, the available funding is insufficient to support the needs of research and development. Recent years have seen various large collaborative efforts involving public-private partnerships, mimicking the situation during the golden age of antibiotic drug discovery during the 1950s and 1960s. The large-scale collaborative efforts funded by the European Union (EU) are now subject to diminishing financial support. As a result, TB researchers are increasingly looking for novel forms of funding, such as crowdfunding, to fill this gap. Any potential solution will require a careful reassessment of the incentives to encourage additional organizations to provide funding. Copyright © 2016 Elsevier Ltd. All rights reserved.

Optimal consensus algorithm integrated with obstacle avoidance

NASA Astrophysics Data System (ADS)

Wang, Jianan; Xin, Ming

2013-01-01

This article proposes a new consensus algorithm for the networked single-integrator systems in an obstacle-laden environment. A novel optimal control approach is utilised to achieve not only multi-agent consensus but also obstacle avoidance capability with minimised control efforts. Three cost functional components are defined to fulfil the respective tasks. In particular, an innovative nonquadratic obstacle avoidance cost function is constructed from an inverse optimal control perspective. The other two components are designed to ensure consensus and constrain the control effort. The asymptotic stability and optimality are proven. In addition, the distributed and analytical optimal control law only requires local information based on the communication topology to guarantee the proposed behaviours, rather than all agents' information. The consensus and obstacle avoidance are validated through simulations.

Development and qualification of the US Cruise Missile Propulsion System

NASA Astrophysics Data System (ADS)

Reardon, William H.; Cifone, Anthony J.

1992-09-01

This paper provides a description of the very successful Cruise Missile gas turbine propulsion program managed by the United States Department of Defense. The paper contains a summary of the procurement process, the technical and programmatic milestones, issues and challenges, and lessons learned. In the past fifteen years, testing at the Naval Air Propulsion Center has included over 800 cruise engine development and component substantiation efforts spanning the engine specification qualification requirements. This paper provides a detailed account of environmental test techniques used to qualify the F107 family of gas turbine engines which propel the U.S. Cruise Missile. In addition, a missile freestream flight test simulation for the TOMAHAWK Cruise Missile is discussed along with current and future program efforts.

Rethinking Public Health: Promoting Public Engagement Through a New Discursive Environment

PubMed Central

2014-01-01

I reexamine the notion of public health after reviewing critiques of the prevalent individualistic conception of health. I argue that public health should mean not only the health of the public but also health in the public and by the public, and I expound on the social contingency of health and highlight the importance of the interpersonal dimensions of health conditions and health promotion efforts. Promoting public health requires activating health-enhancing communicative behaviors (such as interpersonal advocacy and mutual responsibility taking) in addition to individual behavioral change. To facilitate such communicative behaviors, it is imperative to first construct a new discursive environment in which to think and talk about health in a language of interdependence and collective efforts. PMID:24228674

Rethinking public health: promoting public engagement through a new discursive environment.

PubMed

Sun, Ye

2014-01-01

I reexamine the notion of public health after reviewing critiques of the prevalent individualistic conception of health. I argue that public health should mean not only the health of the public but also health in the public and by the public, and I expound on the social contingency of health and highlight the importance of the interpersonal dimensions of health conditions and health promotion efforts. Promoting public health requires activating health-enhancing communicative behaviors (such as interpersonal advocacy and mutual responsibility taking) in addition to individual behavioral change. To facilitate such communicative behaviors, it is imperative to first construct a new discursive environment in which to think and talk about health in a language of interdependence and collective efforts.

Enabling Data Access for Environmental Monitoring: SERVIR West Africa

NASA Astrophysics Data System (ADS)

Yetman, G.; de Sherbinin, A. M.

2017-12-01

SERVIR is a join effort between NASA and the U.S. Agency for International Development to form regional partnerships and bring satellite-based earth monitoring and geographic information technologies to bear on environmental issues. The recently established SERVIR node for West Africa aims to "connect space to villages" and enable response to environmental change at the national and local level through partnering with a network of organizations in the region. Comprehensive services—data streams, analysis methods and algorithms, and information products for decision making—to support environmental monitoring of five critical issues identified by West African network members are being designed and developed: ephemeral water, charcoal production, locusts, groundwater, and land use/land cover change. Additionally, climate change information is critical for planning and context in each of these issues. The selection of data and methods is a collaborative effort, with experts in the region working with experts at NASA and the scientific community to best meet information monitoring requirements. Design and delivery of these services requires capacity development in a number of areas, including best practices in data management, analysis methods for combining multiple data streams, and information technology infrastructure. Two research centers at Columbia University are implementing partners for SERVIR West Africa, acting to support capacity development in network members through a combination of workshops, training, and implementation of technologies in the region. The presentation will focus on efforts by these centers to assess current capabilities and improve capacity through gathering requirements, system design, technology selection, technology deployment, training, and workshops.

A comparison of US and Norwegian regulation of coumarin in tobacco products

PubMed Central

Givel, M

2003-01-01

Objective: This paper examines policy processes regarding why the USA and Norway have not regulated coumarin in tobacco. Design: A qualitative analysis of all tobacco industry documents regarding coumarin since the 1950s from the 1998 US Master Settlement Agreement and subsequent legal settlements. Additional data were collected from newspaper reports, general internet search engines, journal articles, scholarly reports, court cases, statutes, regulations, and informal correspondence with tobacco control experts in Norway. Main outcome measure: An overview, summary, and analysis of all documents related to coumarin. Results: In the USA from 1954 until 1985 when coumarin was reportedly removed from domestic cigarettes, but not from pipe tobacco until 1996, and not at all from imported Indian bidi cigarettes, regulatory efforts were stymied. In Norway, from 1973 to the present, the tobacco industry has never disclosed whether its tobacco products contain coumarin. In both the USA and Norway, the extreme delay and lack of vigorous evidence gathering and significant remedies were caused by tobacco industry assertions that revealing tobacco additives was a violation of trade secrets, and by weak regulatory authority and efforts to regulate coumarin. Conclusion: Vigorous and expeditious regulatory investigations and remedies for harmful additives in tobacco, such as coumarin, can protect the public health. Astute insider and outsider political advocacy by health advocates is required to hold elected officials and civil servants publicly accountable for failing to enact disclosure laws and to engage in effective regulatory efforts. PMID:14660776

Veterans’ Health Care: Limited Progress Made to Address Concerns That Led to High Risk Designation

DTIC Science & Technology

2017-03-15

partially meet two of the five criteria GAO uses to assess removal from the High-Risk List ( leadership commitment and an action plan), but it has not met...the other three (agency capacity, monitoring efforts, and demonstrated progress). Specifically, VA officials have taken leadership actions such as...high-risk designation, additional actions are required of VA, including: (1) demonstrating stronger leadership support as it continues its

Using electronic questionnaires to collect patient reported history.

PubMed

Benoit, Angie; Dykes, Patricia; Chang, Frank; Gertman, Paul; Vandever, Woodrow; Li, Qi; Wald, Jonathan

2007-10-11

EMR adoption has faced a major barrier around time and effort required to enter clinical data. In addition, patient entered data has not been effectively used by clinicians to identify critical clinical issues and drive best clinical interventions. By allowing patients to enter historical clinical data, using online questionnaires before their visit, it will have a positive impact on office workflow, physician and patient satisfaction, and support population based health and risk assessment.

2014 Survivor Experience Survey: Report on Preliminary Results. Fiscal Year 2014, Quarter 4

DTIC Science & Technology

2014-12-01

contact with the survivor, nor an ability to “track” or determine the survivor’s identity. The challenge , given the limitations noted above, was...was done primarily through SARCs, with additional support from UVAs/VAs and Special Victims’ Legal Counsels/Victims’ Legal Counsels (SVC/ VLC ). These...and SVC/ VLC to recruit their assistance in notifying eligible survivors about the survey effort and steps to obtain a ticket number without requiring

Federal Reserve Could Improve the Efficiency of Bank Holding Company Inspections.

DTIC Science & Technology

1981-08-18

examiners have the essential qualifications and experience needed to perform many such tasks, and it would seem to require little additional effort...activities and where the holding company and subsidiary bank management are essentially the same. (See p. 32.) AGENCY COMMENTS The Federal Reserve has...consider- ably more complex and thus moe difficult to evaluate. Most small companies are tax shells and operate essentially as banks. The risk in small

Federal Student Aid: Recent Changes to Eligibility Requirements and Additional Efforts to Promote Awareness Could Increase Academic Competitiveness and SMART Grant Participation. Report to Congressional Requesters. GAO-09-343

ERIC Educational Resources Information Center

US Government Accountability Office, 2009

2009-01-01

The Academic Competitiveness (AC) and National Science and Mathematics Access to Retain Talent (SMART) Grants were established by the Deficit Reduction Act of 2005. The grants provide merit-based financial aid to certain low-income college students eligible for Federal Pell Grants and are administered by the Department of Education (Education).…

Learning curves in health professions education.

PubMed

Pusic, Martin V; Boutis, Kathy; Hatala, Rose; Cook, David A

2015-08-01

Learning curves, which graphically show the relationship between learning effort and achievement, are common in published education research but are not often used in day-to-day educational activities. The purpose of this article is to describe the generation and analysis of learning curves and their applicability to health professions education. The authors argue that the time is right for a closer look at using learning curves-given their desirable properties-to inform both self-directed instruction by individuals and education management by instructors.A typical learning curve is made up of a measure of learning (y-axis), a measure of effort (x-axis), and a mathematical linking function. At the individual level, learning curves make manifest a single person's progress towards competence including his/her rate of learning, the inflection point where learning becomes more effortful, and the remaining distance to mastery attainment. At the group level, overlaid learning curves show the full variation of a group of learners' paths through a given learning domain. Specifically, they make overt the difference between time-based and competency-based approaches to instruction. Additionally, instructors can use learning curve information to more accurately target educational resources to those who most require them.The learning curve approach requires a fine-grained collection of data that will not be possible in all educational settings; however, the increased use of an assessment paradigm that explicitly includes effort and its link to individual achievement could result in increased learner engagement and more effective instructional design.

Electrofishing effort requirements for estimating species richness in the Kootenai River, Idaho

USGS Publications Warehouse

Watkins, Carson J.; Quist, Michael C.; Shepard, Bradley B.; Ireland, Susan C.

2016-01-01

This study was conducted on the Kootenai River, Idaho to provide insight on sampling requirements to optimize future monitoring effort associated with the response of fish assemblages to habitat rehabilitation. Our objective was to define the electrofishing effort (m) needed to have a 95% probability of sampling 50, 75, and 100% of the observed species richness and to evaluate the relative influence of depth, velocity, and instream woody cover on sample size requirements. Sidechannel habitats required more sampling effort to achieve 75 and 100% of the total species richness than main-channel habitats. The sampling effort required to have a 95% probability of sampling 100% of the species richness was 1100 m for main-channel sites and 1400 m for side-channel sites. We hypothesized that the difference in sampling requirements between main- and side-channel habitats was largely due to differences in habitat characteristics and species richness between main- and side-channel habitats. In general, main-channel habitats had lower species richness than side-channel habitats. Habitat characteristics (i.e., depth, current velocity, and woody instream cover) were not related to sample size requirements. Our guidelines will improve sampling efficiency during monitoring effort in the Kootenai River and provide insight on sampling designs for other large western river systems where electrofishing is used to assess fish assemblages.

Combating poor-quality anti-malarial medicines: a call to action.

PubMed

Bassat, Quique; Tanner, Marcel; Guerin, Philippe J; Stricker, Kirstin; Hamed, Kamal

2016-06-01

The circulation of poor-quality medicines continues to undermine the fight against many life-threatening diseases. Anti-malarial medicines appear to have been particularly compromised and present a major public health threat in malaria-endemic countries, negatively affecting individuals and their communities. Concerted collaborative efforts are required from global, regional and national organizations, involving the public and private sectors, to address the problem. While many initiatives are underway, a number of unmet needs deserve urgent and increased multisector attention. At the global level, there is a need for an international public health legal framework or treaty on poor-quality medicines, with statutes suitable for integration into national laws. In addition, increased international efforts are required to strengthen the governance of global supply chains and enhance cooperation between national medicine regulation authorities and law enforcement bodies. Increased investment is needed in innovative technologies that will enable healthcare teams to detect poor-quality medicines at all levels of the supply chain. At the regional level, a number of initiatives would be beneficial-key areas are standardization, simplification, and reciprocal recognition of registration processes and development of quality control capacity in regional centres of excellence that are better aligned with public health needs; improved surveillance methods and creation of a framework for compulsory and transparent reporting of poor-quality medicines; additional support for national medicine regulation authorities and other national partner authorities; and an increase in support for regional laboratories to boost their capabilities in detecting poor-quality medicines. It is vital that all stakeholders involved in efforts against poor-quality anti-malarial medicines extend and strengthen their actions in these critical areas and thus effectively support global health development and malaria elimination programmes.

Recruiting medical groups for research: relationships, reputation, requirements, rewards, reciprocity, resolution, and respect

PubMed Central

Solberg, Leif I

2006-01-01

Background In order to conduct good implementation science research, it will be necessary to recruit and obtain good cooperation and comprehensive information from complete medical practice organizations. The goal of this paper is to report an effective example of such a recruitment effort for a study of the organizational aspects of depression care quality. Methods There were 41 medical groups in the Minnesota region that were eligible for participation in the study because they had sufficient numbers of patients with depression. We documented the steps required to both recruit their participation in this study and obtain their completion of two questionnaire surveys and two telephone interviews. Results All 41 medical groups agreed to participate and consented to our use of confidential data about their care quality. In addition, all 82 medical directors and quality improvement coordinators completed the necessary questionnaires and interviews. The key factors explaining this success can be summarized as the seven R's: Relationships, Reputation, Requirements, Rewards, Reciprocity, Resolution, and Respect. Conclusion While all studies will not have all of these factors in such good alignment, attention to them may be important to other efforts to add to our knowledge of implementation science. PMID:17067379

Microwave-superheated Vics Vapo Rub: an ocular public health danger.

PubMed

Fung, Anne E; Oxford, Karen W

2004-02-01

To report a case of a microwave-oven superheated petroleum-based liquid causing severe chemical and thermal ocular burns treated successfully with amniotic membrane transplantation. Observational case report. Retrospective review of clinical case. A 77-year-old woman sustained a severe combined chemical and thermal burn from microwave-heated Vicks Vapo-Rub requiring amniotic membrane transplant, with subsequent development of phacomorphic glaucoma, requiring cataract extraction, and bullous keratopathy, requiring penetrating keratoplasty. As microwave oven use becomes more commonplace, the risk of superheating liquids becomes an increasingly significant ocular danger. Continued efforts to educate the public about safe microwave use is necessary. Additionally, amniotic membrane transplantation was found to be effective in managing a combined chemical and thermal ocular burn.

Flexible Fabrics with High Thermal Conductivity for Advanced Spacesuits

NASA Technical Reports Server (NTRS)

Trevino, Luis A.; Bue, Grant; Orndoff, Evelyne; Kesterson, Matt; Connel, John W.; Smith, Joseph G., Jr.; Southward, Robin E.; Working, Dennis; Watson, Kent A.; Delozier, Donovan M.

2006-01-01

This paper describes the effort and accomplishments for developing flexible fabrics with high thermal conductivity (FFHTC) for spacesuits to improve thermal performance, lower weight and reduce complexity. Commercial and additional space exploration applications that require substantial performance enhancements in removal and transport of heat away from equipment as well as from the human body can benefit from this technology. Improvements in thermal conductivity were achieved through the use of modified polymers containing thermally conductive additives. The objective of the FFHTC effort is to significantly improve the thermal conductivity of the liquid cooled ventilation garment by improving the thermal conductivity of the subcomponents (i.e., fabric and plastic tubes). This paper presents the initial system modeling studies, including a detailed liquid cooling garment model incorporated into the Wissler human thermal regulatory model, to quantify the necessary improvements in thermal conductivity and garment geometries needed to affect system performance. In addition, preliminary results of thermal conductivity improvements of the polymer components of the liquid cooled ventilation garment are presented. By improving thermal garment performance, major technology drivers will be addressed for lightweight, high thermal conductivity, flexible materials for spacesuits that are strategic technical challenges of the Exploration

Thermal performance modeling of NASA s scientific balloons

NASA Astrophysics Data System (ADS)

Franco, H.; Cathey, H.

The flight performance of a scientific balloon is highly dependant on the interaction between the balloon and its environment. The balloon is a thermal vehicle. Modeling a scientific balloon's thermal performance has proven to be a difficult analytical task. Most previous thermal models have attempted these analyses by using either a bulk thermal model approach, or by simplified representations of the balloon. These approaches to date have provided reasonable, but not very accurate results. Improvements have been made in recent years using thermal analysis tools developed for the thermal modeling of spacecraft and other sophisticated heat transfer problems. These tools, which now allow for accurate modeling of highly transmissive materials, have been applied to the thermal analysis of NASA's scientific balloons. A research effort has been started that utilizes the "Thermal Desktop" addition to AUTO CAD. This paper will discuss the development of thermal models for both conventional and Ultra Long Duration super-pressure balloons. This research effort has focused on incremental analysis stages of development to assess the accuracy of the tool and the required model resolution to produce usable data. The first stage balloon thermal analyses started with simple spherical balloon models with a limited number of nodes, and expanded the number of nodes to determine required model resolution. These models were then modified to include additional details such as load tapes. The second stage analyses looked at natural shaped Zero Pressure balloons. Load tapes were then added to these shapes, again with the goal of determining the required modeling accuracy by varying the number of gores. The third stage, following the same steps as the Zero Pressure balloon efforts, was directed at modeling super-pressure pumpkin shaped balloons. The results were then used to develop analysis guidelines and an approach for modeling balloons for both simple first order estimates and detailed full models. The development of the radiative environment and program input files, the development of the modeling techniques for balloons, and the development of appropriate data output handling techniques for both the raw data and data plots will be discussed. A general guideline to match predicted balloon performance with known flight data will also be presented. One long-term goal of this effort is to develop simplified approaches and techniques to include results in performance codes being developed.

Power management and distribution considerations for a lunar base

NASA Technical Reports Server (NTRS)

Kenny, Barbara H.; Coleman, Anthony S.

1991-01-01

Design philosophies and technology needs for the power management and distribution (PMAD) portion of a lunar base power system are discussed. A process is described whereby mission planners may proceed from a knowledge of the PMAD functions and mission performance requirements to a definition of design options and technology needs. Current research efforts at the NASA LRC to meet the PMAD system needs for a Lunar base are described. Based on the requirements, the lunar base PMAD is seen as best being accomplished by a utility like system, although with some additional demands including autonomous operation and scheduling and accurate, predictive modeling during the design process.

HIPAA brings new requirements, new opportunities.

PubMed

Moynihan, J J; McLure, M L

2000-03-01

The passage of the Health Insurance Portability and Accountability Act of 1996 (HIPAA) brought with it the need for Federal rules to implement the act's simplification and cost-reduction efforts. HHS has published proposed rules related to security for the electronic transmission of health information, privacy of individually identifiable health information, transactions and code sets, and national provider and employer identifiers. Additional proposed rules will be published this year for claims attachments and health plan identifiers. Although HIPAA does not require providers to conduct business electronically, the new standards give providers the opportunity to reduce healthcare administrative costs significantly and undertake electronic commerce efficiently and cost-effectively.

DESAP 1: A structural design program with stress and displacement constraints. Volume 1: Theoretical and user's manual

NASA Technical Reports Server (NTRS)

Kiusalaas, J.; Reddy, G. B.

1977-01-01

A finite element program is presented for computer-automated, minimum weight design of elastic structures with constraints on stresses (including local instability criteria) and displacements. Volume 1 of the report contains the theoretical and user's manual of the program. Sample problems and the listing of the program are included in Volumes 2 and 3. The element subroutines are organized so as to facilitate additions and changes by the user. As a result, a relatively minor programming effort would be required to make DESAP 1 into a special purpose program to handle the user's specific design requirements and failure criteria.

Studies with the USF/NASA toxicity screening test method - Exercise wheels and oxygen replenishment

NASA Technical Reports Server (NTRS)

Hilado, C. J.; Cumming, H. J.

1977-01-01

Continuing efforts to improve the University of San Francisco/NASA toxicity screening test method have included the addition of exercise wheels to provide a different measure of incapacitation, and oxygen replenishment to offset any effect of oxygen depletion by the test animals. The addition of exercise wheels limited the number of animals in each test and doubled the required number of tests without any significant improvement in reproducibility. Oxygen replenishment appears to have an effect on survival in the last 5 minutes of the 30-minute test, but the effect is expected to be similar for most materials.

CREATION OF THE MODEL ADDITIONAL PROTOCOL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houck, F.; Rosenthal, M.; Wulf, N.

In 1991, the international nuclear nonproliferation community was dismayed to discover that the implementation of safeguards by the International Atomic Energy Agency (IAEA) under its NPT INFCIRC/153 safeguards agreement with Iraq had failed to detect Iraq's nuclear weapon program. It was now clear that ensuring that states were fulfilling their obligations under the NPT would require not just detecting diversion but also the ability to detect undeclared materials and activities. To achieve this, the IAEA initiated what would turn out to be a five-year effort to reappraise the NPT safeguards system. The effort engaged the IAEA and its Member Statesmore » and led to agreement in 1997 on a new safeguards agreement, the Model Protocol Additional to the Agreement(s) between States and the International Atomic Energy Agency for the Application of Safeguards. The Model Protocol makes explicit that one IAEA goal is to provide assurance of the absence of undeclared nuclear material and activities. The Model Protocol requires an expanded declaration that identifies a State's nuclear potential, empowers the IAEA to raise questions about the correctness and completeness of the State's declaration, and, if needed, allows IAEA access to locations. The information required and the locations available for access are much broader than those provided for under INFCIRC/153. The negotiation was completed in quite a short time because it started with a relatively complete draft of an agreement prepared by the IAEA Secretariat. This paper describes how the Model Protocol was constructed and reviews key decisions that were made both during the five-year period and in the actual negotiation.« less

Chemical plants remain vulnerable to terrorists: a call to action.

PubMed

Lippin, Tobi Mae; McQuiston, Thomas H; Bradley-Bull, Kristin; Burns-Johnson, Toshiba; Cook, Linda; Gill, Michael L; Howard, Donna; Seymour, Thomas A; Stephens, Doug; Williams, Brian K

2006-09-01

U.S. chemical plants currently have potentially catastrophic vulnerabilities as terrorist targets. The possible consequences of these vulnerabilities echo from the tragedies of the Bhopal incident in 1984 to the terrorist attacks on 11 September 2001 and, most recently, Hurricanes Katrina and Rita. Findings from a 2004 nationwide participatory research study of 125 local union leaders at sites with very large volumes of highly hazardous chemicals suggest that voluntary efforts to achieve chemical plant security are not succeeding. Study respondents reported that companies had only infrequently taken actions that are most effective in preventing or in preparing to respond to a terrorist threat. In addition, companies reportedly often failed to involve key stakeholders, including workers, local unions, and the surrounding communities, in these efforts. The environmental health community thus has an opportunity to play a key role in advocating for and supporting improvements in prevention of and preparation for terrorist attacks. Policy-level recommendations to redress chemical site vulnerabilities and the related ongoing threats to the nation's security are as follows: a) specify detailed requirements for chemical site assessment and security ; b) mandate audit inspections supported by significant penalties for cases of noncompliance ; c) require progress toward achieving inherently safer processes, including the minimizing of storage of highly hazardous chemicals ; d) examine and require additional effective actions in prevention, emergency preparedness, and response and remediation ; e) mandate and fund the upgrading of emergency communication systems ; and f) involve workers and community members in plan creation and equip and prepare them to prevent and respond effectively to an incident.

Chemical Plants Remain Vulnerable to Terrorists: A Call to Action

PubMed Central

Lippin, Tobi Mae; McQuiston, Thomas H.; Bradley-Bull, Kristin; Burns-Johnson, Toshiba; Cook, Linda; Gill, Michael L.; Howard, Donna; Seymour, Thomas A.; Stephens, Doug; Williams, Brian K.

2006-01-01

U.S. chemical plants currently have potentially catastrophic vulnerabilities as terrorist targets. The possible consequences of these vulnerabilities echo from the tragedies of the Bhopal incident in 1984 to the terrorist attacks on 11 September 2001 and, most recently, Hurricanes Katrina and Rita. Findings from a 2004 nationwide participatory research study of 125 local union leaders at sites with very large volumes of highly hazardous chemicals suggest that voluntary efforts to achieve chemical plant security are not succeeding. Study respondents reported that companies had only infrequently taken actions that are most effective in preventing or in preparing to respond to a terrorist threat. In addition, companies reportedly often failed to involve key stakeholders, including workers, local unions, and the surrounding communities, in these efforts. The environmental health community thus has an opportunity to play a key role in advocating for and supporting improvements in prevention of and preparation for terrorist attacks. Policy-level recommendations to redress chemical site vulnerabilities and the related ongoing threats to the nation’s security are as follows: a) specify detailed requirements for chemical site assessment and security; b) mandate audit inspections supported by significant penalties for cases of noncompliance; c) require progress toward achieving inherently safer processes, including the minimizing of storage of highly hazardous chemicals; d) examine and require additional effective actions in prevention, emergency preparedness, and response and remediation; e) mandate and fund the upgrading of emergency communication systems; and f) involve workers and community members in plan creation and equip and prepare them to prevent and respond effectively to an incident. PMID:16966080

Carbon Dioxide Observational Platform System (CO-OPS), feasibility study

NASA Technical Reports Server (NTRS)

Bouquet, D. L.; Hall, D. W.; Mcelveen, R. P.

1987-01-01

The Carbon Dioxide Observational Platform System (CO-OPS) is a near-space, geostationary, multi-user, unmanned microwave powered monitoring platform system. This systems engineering feasibility study addressed identified existing requirements such as: carbon dioxide observational data requirements, communications requirements, and eye-in-the-sky requirements of other groups like the Defense Department, the Forestry Service, and the Coast Guard. In addition, potential applications in: earth system science, space system sciences, and test and verification (satellite sensors and data management techniques) were considered. The eleven month effort is summarized. Past work and methods of gathering the required observational data were assessed and rough-order-of magnitude cost estimates have shown the CO-OPS system to be most cost effective (less than $30 million within a 10 year lifetime). It was also concluded that there are no technical, schedule, or obstacles that would prevent achieving the objectives of the total 5-year CO-OPS program.

Towards an Early Software Effort Estimation Based on Functional and Non-Functional Requirements

NASA Astrophysics Data System (ADS)

Kassab, Mohamed; Daneva, Maya; Ormandjieva, Olga

The increased awareness of the non-functional requirements as a key to software project and product success makes explicit the need to include them in any software project effort estimation activity. However, the existing approaches to defining size-based effort relationships still pay insufficient attention to this need. This paper presents a flexible, yet systematic approach to the early requirements-based effort estimation, based on Non-Functional Requirements ontology. It complementarily uses one standard functional size measurement model and a linear regression technique. We report on a case study which illustrates the application of our solution approach in context and also helps evaluate our experiences in using it.

Acceptance test report for portable exhauster POR-007/Skid E

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriskovich, J.R.

1998-07-24

This document describes Acceptance Testing performed on Portable Exhauster POR-007/Skid E. It includes measurements of bearing vibration levels, pressure decay testing, programmable logic controller interlocks, high vacuum, flow and pressure control functional testing. The purpose of Acceptance testing documented by this report was to demonstrate compliance of the exhausters with the performance criteria established within HNF-0490, Rev. 1 following a repair and upgrade effort at Hanford. In addition, data obtained during this testing is required for the resolution of outstanding Non-conformance Reports (NCR), and finally, to demonstrate the functionality of the associated software for the pressure control and high vacuummore » exhauster operating modes provided for by W-320. Additional testing not required by the ATP was also performed to assist in the disposition and close out of receiving inspection report and for application design information (system curve). Results of this testing are also captured within this document.« less

Sensitivity to mental effort and test-retest reliability of heart rate variability measures in healthy seniors.

PubMed

Mukherjee, Shalini; Yadav, Rajeev; Yung, Iris; Zajdel, Daniel P; Oken, Barry S

2011-10-01

To determine (1) whether heart rate variability (HRV) was a sensitive and reliable measure in mental effort tasks carried out by healthy seniors and (2) whether non-linear approaches to HRV analysis, in addition to traditional time and frequency domain approaches were useful to study such effects. Forty healthy seniors performed two visual working memory tasks requiring different levels of mental effort, while ECG was recorded. They underwent the same tasks and recordings 2 weeks later. Traditional and 13 non-linear indices of HRV including Poincaré, entropy and detrended fluctuation analysis (DFA) were determined. Time domain, especially mean R-R interval (RRI), frequency domain and, among non-linear parameters - Poincaré and DFA were the most reliable indices. Mean RRI, time domain and Poincaré were also the most sensitive to different mental effort task loads and had the largest effect size. Overall, linear measures were the most sensitive and reliable indices to mental effort. In non-linear measures, Poincaré was the most reliable and sensitive, suggesting possible usefulness as an independent marker in cognitive function tasks in healthy seniors. A large number of HRV parameters was both reliable as well as sensitive indices of mental effort, although the simple linear methods were the most sensitive. Copyright © 2011 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

An airline study of advanced technology requirements for advanced high speed commercial engines. 3: Propulsion system requirements

NASA Technical Reports Server (NTRS)

Sallee, G. P.

1973-01-01

The advanced technology requirements for an advanced high speed commercial transport engine are presented. The results of the phase 3 effort cover the requirements and objectives for future aircraft propulsion systems. These requirements reflect the results of the Task 1 and 2 efforts and serve as a baseline for future evaluations, specification development efforts, contract/purchase agreements, and operational plans for future subsonic commercial engines. This report is divided into five major sections: (1) management objectives for commercial propulsion systems, (2) performance requirements for commercial transport propulsion systems, (3) design criteria for future transport engines, (4) design requirements for powerplant packages, and (5) testing.

Case outsourcing medical device reprocessing.

PubMed

Haley, Deborah

2004-04-01

IN THE INTEREST OF SAVING MONEY, many hospitals are considering extending the life of some single-use medical devices by using medical device reprocessing programs. FACILITIES OFTEN LACK the resources required to meet the US Food and Drug Administration's tough quality assurance standards. BY OUTSOURCING, hospitals can reap the benefits of medical device reprocessing without assuming additional staffing and compliance burdens. OUTSOURCING enables hospitals to implement a medical device reprocessing program quickly, with no capital investment and minimal effort.

DSS command software update

NASA Technical Reports Server (NTRS)

Stinnett, W. G.

1980-01-01

The modifications, additions, and testing results for a version of the Deep Space Station command software, generated for support of the Voyager Saturn encounter, are discussed. The software update requirements included efforts to: (1) recode portions of the software to permit recovery of approximately 2000 words of memory; (2) correct five Voyager Ground data System liens; (3) provide capability to automatically turn off the command processor assembly local printer during periods of low activity; and (4) correct anomalies existing in the software.

Biomarkers for Autism And For Gastrointestinal And Sleep Problems In Autism

DTIC Science & Technology

2011-10-01

the burden imposed by the time and effort required. Parents are asked to collect two daytime and one overnight diaper , fill out two one-page...questionnaires, complete a diaper collection data sheet, complete and sign two forms, and arrange a FedEx pick-up. In addition, the financial incentive of...Collect one midday 11AM-3PM diaper (rather than one morning and one afternoon daytime diapers ) and one nighttime diaper (no change to nighttime diaper

Electronic Waste: DOD Is Recovering Materials, but Several Factors May Hinder Near-Term Expansion of These Efforts

DTIC Science & Technology

2016-06-01

electronics with lithium ion batteries . In summary, these studies had the following results: • Recovery of tantalum from DOD’s electronic waste may be...expensive chemicals are required. • Recovery of cobalt from lithium ion batteries is possible, because recycling capability exists domestically and...quality. Additional research on the availability of lithium - ion batteries and the cost of recycling them would be necessary before recovery of this

Development of a Procedure to Increase Awareness and Reporting of Counterintelligence and Terrorism Indicators: Personal Acknowledgment of Staff Security (PASS)

DTIC Science & Technology

2013-02-27

signed certification by supervisors that they understand and intend to comply with reporting policy. Recent psychological research suggests that the...intend to comply with reporting policy. Recent psychological research suggests that the additional step of requiring a signed acknowledgment may make...prepared by the Defense Personnel Security Research Center (PERSEREC) as part of an effort to design and pilot test the proposed system. This report was

NMSBA ? RS21.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kinnan, Mark K.; Valerio, Richard Arthur; Flanagan, Tatiana Paz

2016-12-01

This report gives introductory guidance on the level of effort required to create a data warehouse for mining data. Numerous tutorials have been provided to demonstrate the process of downloading raw data, processing the raw data, and importing the data into a PostgreSQL database. Additional information and tutorial has been provided on setting up a Hadoop cluster for storing vasts amounts of data. This report has been generated as a deliverable for a New Mexico Small Business Assistance (NMSBA) project.

The Army’s Future Combat Systems Program and Alternatives

DTIC Science & Technology

2006-08-01

crisis anywhere in the world.sea. Their additional equipment primarily comprises hundreds of armored vehicles and heavy and medium- weight trucks (see...Combat Vehicle Reference Guide,” available at www.inetres.com/gp/ military/cv/index.html; and Christopher Foss, ed., Jane’s Armour and Artillery, 1979-1980...stages of a crisis . After that, the level of effort is reduced to one that can be maintained indefinitely. 6 ft.timated time such ships would require

Low background materials and fabrication techniques for cables and connectors in the Majorana Demonstrator

NASA Astrophysics Data System (ADS)

Busch, M.; Abgrall, N.; Alvis, S. I.; Arnquist, I. J.; Avignone, F. T.; Barabash, A. S.; Barton, C. J.; Bertrand, F. E.; Bode, T.; Bradley, A. W.; Brudanin, V.; Buuck, M.; Caldwell, T. S.; Chan, Y.-D.; Christofferson, C. D.; Chu, P.-H.; Cuesta, C.; Detwiler, J. A.; Dunagan, C.; Efremenko, Yu.; Ejiri, H.; Elliott, S. R.; Gilliss, T.; Giovanetti, G. K.; Green, M. P.; Gruszko, J.; Guinn, I. S.; Guiseppe, V. E.; Haufe, C. R.; Hehn, L.; Henning, R.; Hoppe, E. W.; Howe, M. A.; Keeter, K. J.; Kidd, M. F.; Konovalov, S. I.; Kouzes, R. T.; Lopez, A. M.; Martin, R. D.; Massarczyk, R.; Meijer, S. J.; Mertens, S.; Myslik, J.; O'Shaughnessy, C.; Othman, G.; Poon, A. W. P.; Radford, D. C.; Rager, J.; Reine, A. L.; Rielage, K.; Robertson, R. G. H.; Rouf, N. W.; Shanks, B.; Shirchenko, M.; Suriano, A. M.; Tedeschi, D.; Trimble, J. E.; Varner, R. L.; Vasilyev, S.; Vetter, K.; Vorren, K.; White, B. R.; Wilkerson, J. F.; Wiseman, C.; Xu, W.; Yakushev, E.; Yu, C.-H.; Yumatov, V.; Zhitnikov, I.; Zhu, B. X.

2018-01-01

The Majorana Collaboration is searching for the neutrinoless double-beta decay of the nucleus 76Ge. The Majorana Demonstrator is an array of germanium detectors deployed with the aim of implementing background reduction techniques suitable for a tonne scale 76Ge-based search (the LEGEND collaboration). In the Demonstrator, germanium detectors operate in an ultra-pure vacuum cryostat at 80 K. One special challenge of an ultra-pure environment is to develop reliable cables, connectors, and electronics that do not significantly contribute to the radioactive background of the experiment. This paper highlights the experimental requirements and how these requirements were met for the Majorana Demonstrator, including plans to upgrade the wiring for higher reliability in the summer of 2018. Also described are requirements for LEGEND R&D efforts underway to meet these additional requirements

Predictors of 4-year retention among African American and white community-dwelling participants in the UAB study of aging.

PubMed

Allman, Richard M; Sawyer, Patricia; Crowther, Martha; Strothers, Harry S; Turner, Timothy; Fouad, Mona N

2011-06-01

To identify racial/ethnic differences in retention of older adults at 3 levels of participation in a prospective observational study: telephone, in-home assessments, and home visits followed by blood draws. A prospective study of 1,000 community-dwelling Medicare beneficiaries aged 65 years and older included a baseline in-home assessment and telephone follow-up calls at 6-month intervals; at 4 years, participants were asked to complete an additional in-home assessment and have blood drawn. After 4 years, 21.7% died and 0.7% withdrew, leaving 776 participants eligible for follow-up (49% African American; 46% male; 51% rural). Retention for telephone follow-up was 94.5% (N = 733/776); 624/733 (85.1%) had home interviews, and 408/624 (65.4%) had a nurse come to the home for the blood draw. African American race was an independent predictor of participation in in-home assessments, but African American race and rural residence were independent predictors of not participating in a blood draw. Recruitment efforts designed to demonstrate respect for all research participants, home visits, and telephone follow-up interviews facilitate high retention rates for both African American and White older adults; however, additional efforts are required to enhance participation of African American and rural participants in research requiring blood draws.

Urbanization and the Carbon Cycle: Synthesis of Ongoing Research

NASA Astrophysics Data System (ADS)

Gurney, K. R.; Duren, R. M.; Hutyra, L.; Ehleringer, J. R.; Patarasuk, R.; Song, Y.; Huang, J.; Davis, K.; Kort, E. A.; Shepson, P. B.; Turnbull, J. C.; Lauvaux, T.; Rao, P.; Eldering, A.; Miller, C. E.; Wofsy, S.; McKain, K.; Mendoza, D. L.; Lin, J. C.; Sweeney, C.; Miles, N. L.; Richardson, S.; Cambaliza, M. O. L.

2015-12-01

Given the explosive growth in urbanization and its dominant role in current and future global greenhouse gas emissions, urban areas have received increasing research attention from the carbon cycle science community. The emerging focus is driven by the increasingly dense atmospheric observing capabilities - ground and space-based - in addition to the rising profile of cities within international climate change policymaking. Dominated by anthropogenic emissions, urban carbon cycle research requires a cross-disciplinary perspective with contributions from disciplines such as engineering, economics, social theory, and atmospheric science. We review the recent results from a sample of the active urban carbon research efforts including the INFLUX experiment (Indianapolis), the Megacity carbon project (Los Angeles), Salt Lake City, and Boston. Each of these efforts represent unique approaches in pursuit of different scientific and policy questions and assist in setting priorities for future research. From top-down atmospheric measurement systems to bottom-up estimation, these research efforts offer a view of the challenges and opportunities in urban carbon cycle research.

Quadratic Programming for Allocating Control Effort

NASA Technical Reports Server (NTRS)

Singh, Gurkirpal

2005-01-01

A computer program calculates an optimal allocation of control effort in a system that includes redundant control actuators. The program implements an iterative (but otherwise single-stage) algorithm of the quadratic-programming type. In general, in the quadratic-programming problem, one seeks the values of a set of variables that minimize a quadratic cost function, subject to a set of linear equality and inequality constraints. In this program, the cost function combines control effort (typically quantified in terms of energy or fuel consumed) and control residuals (differences between commanded and sensed values of variables to be controlled). In comparison with prior control-allocation software, this program offers approximately equal accuracy but much greater computational efficiency. In addition, this program offers flexibility, robustness to actuation failures, and a capability for selective enforcement of control requirements. The computational efficiency of this program makes it suitable for such complex, real-time applications as controlling redundant aircraft actuators or redundant spacecraft thrusters. The program is written in the C language for execution in a UNIX operating system.

Inequity responses of monkeys modified by effort.

PubMed

van Wolkenten, Megan; Brosnan, Sarah F; de Waal, Frans B M

2007-11-20

Without joint benefits, joint actions could never have evolved. Cooperative animals need to monitor closely how large a share they receive relative to their investment toward collective goals. This work documents the sensitivity to reward division in brown, or tufted, capuchin monkeys (Cebus apella). In addition to confirming previous results with a larger subject pool, this work rules out several alternative explanations and adds data on effort sensitivity. Thirteen adult monkeys exchanged tokens for rewards, showing negative reactions to receiving a less-favored reward than their partner. Because their negative reaction could not be attributed to the mere visibility of better rewards (greed hypothesis) nor to having received such rewards in the immediate past (frustration hypothesis), it must have been caused by seeing their partner obtain the better reward. Effort had a major effect in that by far the lowest level of performance in the entire study occurred in subjects required to expend a large effort while at the same time seeing their partner receive a better reward. It is unclear whether this effort-effect was based on comparisons with the partner, but it added significantly to the intensity of the inequity response. These effects are as expected if the inequity response evolved in the context of cooperative survival strategies.

The cost of model reference adaptive control - Analysis, experiments, and optimization

NASA Technical Reports Server (NTRS)

Messer, R. S.; Haftka, R. T.; Cudney, H. H.

1993-01-01

In this paper the performance of Model Reference Adaptive Control (MRAC) is studied in numerical simulations and verified experimentally with the objective of understanding how differences between the plant and the reference model affect the control effort. MRAC is applied analytically and experimentally to a single degree of freedom system and analytically to a MIMO system with controlled differences between the model and the plant. It is shown that the control effort is sensitive to differences between the plant and the reference model. The effects of increased damping in the reference model are considered, and it is shown that requiring the controller to provide increased damping actually decreases the required control effort when differences between the plant and reference model exist. This result is useful because one of the first attempts to counteract the increased control effort due to differences between the plant and reference model might be to require less damping, however, this would actually increase the control effort. Optimization of weighting matrices is shown to help reduce the increase in required control effort. However, it was found that eventually the optimization resulted in a design that required an extremely high sampling rate for successful realization.

Commercial Electric Vehicle (EV) Development and Manufacturing Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leeve, Dion

Navistar with the Department of Energy’s assistance undertook this effort to achieve the project objectives as listed in the next section. A wholly owned subsidiary of Navistar, Workhorse Sales Corporation was the original grant awardee and upon their discontinuation as a standalone business entity, Navistar assumed the role of principal investigator. The intent of the effort, as part of the American Recovery and Reinvestment Act (ARRA) was to produce zero emission vehicles that could meet the needs of the marketplace while reducing carbon emissions to zero. This effort was predicated upon the assumption that concurrent development activities in the lithiummore » ion battery industry investigations would significantly increase their production volumes thus leading to substantial reductions in their manufacturing costs. As a result of this development effort much was learned about the overall system compatibility between the electric motor, battery pack, and charging capabilities. The original system was significantly revised and improved during the execution of this development effort. The overall approach that was chosen was to utilize a British zero emissions, class 2 truck that had been developed for their market, homologate it and modify it to meet the product requirements as specified in the grant details. All of these specific goals were achieved. During the course of marketing and selling the product valuable information was obtained as relates to customer expectations, price points, and product performance expectations, specifically those customer expectations about range requirements in urban delivery situations. While the grant requirements specified a range of 100 miles on a single charge, actual customer usage logs indicate a range of 40 miles or less is typical for their applications. The price point, primarily due to battery pack costs, was significantly higher than the mass market could bear. From Navistar’s and the overall industry’s perspective, valuable insights and lessons into this all-electric vehicle propulsion were gained during the performance of this effort and can be revisited when battery chemistry and technology advance to the point of more suitable economic viability. Additionally, another goal of the ARRA act and this specific grant was to manufacture the product in the, at that time, economically depressed Northwest Indiana area. Navistar chose a location in Wakarusa, Indiana which fulfilled this requirement. Navistar was and continues to be committed to alternative fuel and propulsion options as an industry leader in the medium and heavy duty truck industry.« less

New Direction of NASA Exploration Life Support

NASA Technical Reports Server (NTRS)

Chambliss, Joe; Lawson, B. Michael; Barta, Daniel J.

2006-01-01

NASA's activities in life support Research and Technology Development (R&TD) have changed in both focus and scope following implementation of recommendations from the Exploration System Architecture Study (ESAS). The limited resources available and the compressed schedule to conduct life support R&TD have required that future efforts address the needs of the Crew Exploration Vehicle (CEV), the Lunar Surface Access Module (LSAM) and Lunar Outpost (LO). Advanced Life Support (ALS) efforts related to long duration planetary bases have been deferred or canceled. This paper describes the scope of the new Exploration Life Support (ELS) project; how it differs from ALS, and how it supports critical needs for the CEV, LSAM and LO. In addition, this paper provides rationale for changes in the scope and focus of technical content within ongoing life support R&TD activities.

A Genetic Algorithm Tool (splicer) for Complex Scheduling Problems and the Space Station Freedom Resupply Problem

NASA Technical Reports Server (NTRS)

Wang, Lui; Valenzuela-Rendon, Manuel

1993-01-01

The Space Station Freedom will require the supply of items in a regular fashion. A schedule for the delivery of these items is not easy to design due to the large span of time involved and the possibility of cancellations and changes in shuttle flights. This paper presents the basic concepts of a genetic algorithm model, and also presents the results of an effort to apply genetic algorithms to the design of propellant resupply schedules. As part of this effort, a simple simulator and an encoding by which a genetic algorithm can find near optimal schedules have been developed. Additionally, this paper proposes ways in which robust schedules, i.e., schedules that can tolerate small changes, can be found using genetic algorithms.

Hardware Assessment in Support of the Dynamic Power Convertor Development Effort

NASA Technical Reports Server (NTRS)

Wilson, Scott D.; Oriti, Sal M.; Schifer, Nicholas A.

2017-01-01

Stirling Radioisotope Power Systems (RPS) are being developed by NASA's RPS Program in collaboration with the U.S. Department of Energy (DOE). Efforts ranging from 2001 to 2015 enabled development of the Technology Demonstration Convertor (TDC) for use in the 110-watt Stirling Radioisotope Generator (SRG-110) and the Advanced Stirling Convertor (ASC) for use in the Advanced Stirling Radioisotope Generator (ASRG). The DOE selected Lockheed Martin Space Systems Company (LMSSC) as the system integration contractor for both flight development efforts. The SRG-110 housed two TDCs fabricated by Infinia and resulted in the production of 16x demonstration units and 2x engineering units. The project was redirected in 2006 to make use of a more efficient and lower mass ASCs under development by Sunpower Inc. The DOE managed the flight contract with LMSSC and subcontractor Sunpower Inc. from 2007 to 2013 to build the ASRG, with support from NASA Glenn Research Center (GRC). Sunpower Inc. held two parallel contracts to produce ASCs, one with Lockheed Martin to produce ASC-F flight units and one with GRC for the production of ASC-E3 engineering unit pathfinders that were used to refine the flight design and production processes. The DOE initiated termination of the ASRG contract in late 2013. After ASRG had ended, GRC completed characterization testing of the ASRG Engineering Unit #2 (EU2) and the GRC contract with Sunpower was also completed. The NASA RPS Program Office has recently initiated a new Dynamic Power Conversion development effort which includes the potential maturation of Stirling, Brayton, and Rankine power convertors for the next generation of RPS. The effort started with the request for proposal and review of submits. Contracts are anticipated for release in 2017 and will initially focus on a design phase prior to fabrication and testing. This new effort will focus on robustness in addition to high efficiency, specific power, and reliability. Also, some requirements introduced during the ASRG contract have also been included in the new effort, such as constant lateral loading. Due to the focus on robustness and new requirements relative to the older TDC design, the Stirling Cycle Development Project has initiated an assessment of government owned hardware to help inform requirements evolution and evaluation of future designs. While lessons learned from the ASRG flight development project have been taken into consideration, the evaluation of the TDC design had not been completed for some existing environments or relatively new requirements. To further assess the TDC design, a series of tasks were initiated to evaluate degradation for units that have operated unattended for over 105,000 hours, demonstrate robustness to a random vibration environment, characterize and evaluate performance for varying lateral load profiles. The status for each task are described.

Methods and Protocols for Developing Prion Vaccines.

PubMed

Marciniuk, Kristen; Taschuk, Ryan; Napper, Scott

2016-01-01

Prion diseases denote a distinct form of infectivity that is based in the misfolding of a self-protein (PrP(C)) into a pathological, infectious conformation (PrP(Sc)). Efforts to develop vaccines for prion diseases have been complicated by the potential dangers that are associated with induction of immune responses against a self-protein. As a consequence, there is considerable appeal for vaccines that specifically target the misfolded prion conformation. Such conformation-specific immunotherapy is made possible through the identification of vaccine targets (epitopes) that are exclusively presented as a consequence of misfolding. An immune response directed against these targets, termed disease-specific epitopes (DSEs), has the potential to spare the function of the native form of the protein while clearing, or neutralizing, the infectious isomer. Although identification of DSEs represents a critical first step in the induction of conformation-specific immune responses, substantial efforts are required to translate these targets into functional vaccines. Due to the poor immunogenicity that is inherent to self-proteins, and that is often associated with short peptides, substantial efforts are required to overcome tolerance-to-self and maximize the resultant immune response following DSE-based immunization. This often includes optimization of target sequences in terms of immunogenicity and development of effective formulation and delivery strategies for the associated peptides. Further, these vaccines must satisfy additional criteria from perspectives of specificity (PrP(C) vs. PrP(Sc)) and safety (antibody-induced template-driven misfolding of PrP(C)). The emphasis of this report is on the steps required to translate DSEs into prion vaccines and subsequent evaluation of the resulting immune responses.

Access to diabetes self-management education: results of national surveys of patients, educators, and physicians.

PubMed

Peyrot, Mark; Rubin, Richard R; Funnell, Martha M; Siminerio, Linda M

2009-01-01

To examine factors related to access to diabetes self-management education (DSME), including services delivered and sought; patient, physician, and program barriers to access; educator outreach and expansion efforts; and perceptions of alternative DSME delivery strategies. Internet surveys were completed by 1169 adults with diabetes (661 with prior DSME, 508 with no prior DSME) from a national community survey panel, 1871 educators who were AADE members, and 629 physicians (212 diabetes specialists, 417 primary care practitioners) from a national physician survey panel. Physicians want patients to receive more self-management support, but some report that patients are told to do things with which the physician does not agree. Provider (physician and educator)-delivered DSME is more highly regarded among those who have received it than among those who have not received it. Physicians generally have positive perceptions of provider-delivered DSME, and educators see physicians as key to encouraging DSME use in patients. Some physicians are concerned about losing patients sent to DSME, and 11% of patients report changing physicians as a result of DSME. Most DSME programs have grown recently as a result of recruiting efforts and adding new programs/services; most programs plan more such efforts. Patients prefer traditional DSME sources/settings and are moderately accepting of media sources. Additional efforts are required to guarantee that all people with diabetes receive the DSME they need. This will require increased referral by physicians, increased follow-through by patients, and increased availability of DSME in forms that make it appealing to patients and physicians.

Review article: safety aspects of anesthesia in under-resourced locations.

PubMed

Enright, Angela

2013-02-01

Improving patient safety during anesthesia and surgery is the focus of much effort worldwide. Major advances have occurred since the 1980s, especially in economically advantaged areas. This paper is a review of some of the challenges that face those who work in resource-poor areas of the world. There is a shortage of trained anesthesia providers, both physician and non-physician, and this is particularly acute outside urban areas. Anesthesia is still sometimes delivered by unqualified people, which results in expected high rates of morbidity and mortality. Residency training programs in low-income countries ought to increase their output as anesthesiologists must be available to supervise non-physician providers. All groups require continuing medical education. In addition, increased efforts are needed to recruit trainees into the specialty of anesthesia and to retain them locally. There is a well-recognized shortage of resources for anesthesia. Consequently, concerted efforts are necessary to ensure reliable supplies of drugs, and attention should be paid to the procurement of anesthesia equipment appropriate for the location. Biomedical support must also be developed. Lifebox is a charitable foundation dedicated to supplying pulse oximeters to low- and middle-income countries. Adoption of the World Health Organization's Surgical Safety Checklist could further reduce morbidity and mortality. Much time, effort, planning, and resources are required to ensure that anesthesia in low-income areas can reach internationally accepted standards. Such investment in anesthesia would result in wider access to surgical and obstetrical care, and the quality and safety of that care would be much improved.

Communication and Organization in Software Development: An Empirical Study

NASA Technical Reports Server (NTRS)

Seaman, Carolyn B.; Basili, Victor R.

1996-01-01

The empirical study described in this paper addresses the issue of communication among members of a software development organization. The independent variables are various attributes of organizational structure. The dependent variable is the effort spent on sharing information which is required by the software development process in use. The research questions upon which the study is based ask whether or not these attributes of organizational structure have an effect on the amount of communication effort expended. In addition, there are a number of blocking variables which have been identified. These are used to account for factors other than organizational structure which may have an effect on communication effort. The study uses both quantitative and qualitative methods for data collection and analysis. These methods include participant observation, structured interviews, and graphical data presentation. The results of this study indicate that several attributes of organizational structure do affect communication effort, but not in a simple, straightforward way. In particular, the distances between communicators in the reporting structure of the organization, as well as in the physical layout of offices, affects how quickly they can share needed information, especially during meetings. These results provide a better understanding of how organizational structure helps or hinders communication in software development.

The Implications of Deep Mitigation Pathways

NASA Astrophysics Data System (ADS)

Calvin, K. V.

2016-12-01

The 21st Conference of Parties to the UNFCCC agreement called for limiting climate change to "well below 2°C above pre-industrial levels and pursuing efforts to limit the temperature increase to 1.5°C." A climate target of 1.5°C places a stringent constraint on allowable emissions over the twenty-first century. Roegli et al. (2015) set that constraint at 200-415 GtCO2 between 2011 and 2100 for a likely chance of staying below 1.5°C in 2100. Limiting emissions to these levels requires that global emissions peak and decline over the coming decades, with net negative global emissions by mid-century. This level of decarbonization requires dramatic shifts in the energy and agricultural sectors, and comes at significant economic costs. This talk explores the effect of mitigating climate change to 1.5°C on the economy, energy system, and terrestrial system. We quantify the required deployment of various low carbon technologies, as well as the amount of existing capital that is abandoned in an effort to limit emissions. We show the shifts required in the terrestrial system, including its contribution to carbon sequestration through afforestation and bioenergy. Additionally, we show the implications of deep mitigation pathways on energy, food, and carbon prices. We contrast these results with a reference, no climate policy, world and a 2°C.

Developing a Science Commons for Geosciences

NASA Astrophysics Data System (ADS)

Lenhardt, W. C.; Lander, H.

2016-12-01

Many scientific communities, recognizing the research possibilities inherent in data sets, have created domain specific archives such as the Incorporated Research Institutions for Seismology (iris.edu) and ClinicalTrials.gov. Though this is an important step forward, most scientists, including geoscientists, also use a variety of software tools and at least some amount of computation to conduct their research. While the archives make it simpler for scientists to locate the required data, provisioning disk space, compute resources, and network bandwidth can still require significant efforts. This challenge exists despite the wealth of resources available to researchers, namely lab IT resources, institutional IT resources, national compute resources (XSEDE, OSG), private clouds, public clouds, and the development of cyberinfrastructure technologies meant to facilitate use of those resources. Further tasks include obtaining and installing required tools for analysis and visualization. If the research effort is a collaboration or involves certain types of data, then the partners may well have additional non-scientific tasks such as securing the data and developing secure sharing methods for the data. These requirements motivate our investigations into the "Science Commons". This paper will present a working definition of a science commons, compare and contrast examples of existing science commons, and describe a project based at RENCI to implement a science commons for risk analytics. We will then explore what a similar tool might look like for the geosciences.

Hot working behavior of selective laser melted and laser metal deposited Inconel 718

NASA Astrophysics Data System (ADS)

Bambach, Markus; Sizova, Irina

2018-05-01

The production of Nickel-based high-temperature components is of great importance for the transport and energy sector. Forging of high-temperature alloys often requires expensive dies, multiple forming steps and leads to forged parts with tolerances that require machining to create the final shape and a large amount of scrap. Additive manufacturing offers the possibility to print the desired shapes directly as net-shape components, requiring only little additional effort in machining. Especially for high-temperature alloys carrying a large amount of energy per unit mass, additive manufacturing could be more energy-efficient than forging if the energy contained in the machining scrap exceeds the energy needed for powder production and laser processing. However, the microstructure and performance of 3d-printed parts will not reach the level of forged material unless further expensive processes such as hot-isostatic pressing are used. Using the design freedom and possibilities to locally engineer material, additive manufacturing could be combined with forging operations to novel process chains, offering the possibility to reduce the number of forging steps and to create near-net shape forgings with desired local properties. Some innovative process chains combining additive manufacturing and forging have been patented recently, but almost no scientific knowledge on the workability of 3D printed preforms exists. The present study investigates the flow stress and microstructure evolution during hot working of pre-forms produced by laser powder deposition and selective laser melting (Figure 1) and puts forward a model for the flow stress.

California's crisis: An exploratory analysis of lifestyle, energy use, and conservation

NASA Astrophysics Data System (ADS)

Gossard, Marcia Hill

Electricity is one of the most serious issues of the 21st century. Modern human societies have become completely dependent upon energy to power modern life---resulting in unwanted environmental effects. Although electricity itself is invisible, many of the most conspicuous household items consume the most electricity. The 2001 energy crisis in California provides a unique opportunity to study how people negotiated their lives during a time of perceived resource scarcity, increased electricity prices, and threats of blackouts. Combining cultural and environmental literatures, I argued that changes in resource availability (perceived or real) led to unsettled lives in which beliefs, rituals and ways of behaving began to be questioned---resulting in new patterns of action organized around lifestyle. As a conceptual framework, lifestyle can be useful for understanding the patterns of people's everyday lives, the objects they consume, and the degrees to which those lifestyles affect the environment. Using data from the California Residential Electricity Conservation Study (CRECS), this research explores the ways households navigated and used different conservation strategies during the summers of 2001 and 2002. Analysis of Behavioral Conservation Strategies (BCS) that require ongoing effort and attention by household residents in order to achieve successful conservation outcomes (e.g., turning off lights or regulating indoor temperature), and Consumer Investment Strategies (CIS) that are one-time purchases improving efficiency (e.g., purchase of an appliance or fixture) reveal different strategies of action over the two years. Wealth indicators and time constraints were less important for predicting conservation, while cultural differences and household composition were better predictors of conservation efforts. In addition, despite assumptions that people are unwilling to change their lifestyle in order to conserve electricity, households employed more strategies that required daily effort and vigilance than one-time consumer actions. Furthermore, many households continued many conservation efforts in the year following the crisis, and there was not an immediate "snap-back" to pre-crisis behaviors. Not only did households employ a variety of conservation strategies that required changes to their lifestyle, the majority did not believe that their quality of life had been reduced or that their conservation efforts involved sacrifices.

When Not All That Counts Can Be Counted: Economic Evaluations And The Value Of Vaccination.

PubMed

Schwartz, Jason L; Mahmoud, Adel

2016-02-01

With vaccination efforts forced to compete for scarce resources at a time when national health budgets, global health resources, and the global donor community are facing considerable strains, advocates of vaccines have sought to better identify, measure, and articulate the value of vaccination. Critics of current analyses of the value of vaccination argue that a broader view is required, one that includes the additional economic benefits of vaccines or acknowledges the social and ethical aims advanced by vaccination programs. Much of this work has paid inadequate attention to the need to apply any expanded view of value consistently across medical interventions, to the close and complex integration of vaccination efforts with other health initiatives, and to the fact that subjectivity and judgments are present in quantitative and qualitative evidence alike. To fully realize the value of vaccination, far more attention, investment, and research are required to better understand the deliberations and decision-making processes by which any kind of evidence is translated into policy. Project HOPE—The People-to-People Health Foundation, Inc.

National Science Foundation-sponsored workshop report. Draft plan for soybean genomics.

PubMed

Stacey, Gary; Vodkin, Lila; Parrott, Wayne A; Shoemaker, Randy C

2004-05-01

Recent efforts to coordinate and define a research strategy for soybean (Glycine max) genomics began with the establishment of a Soybean Genetics Executive Committee, which will serve as a communication focal point between the soybean research community and granting agencies. Secondly, a workshop was held to define a strategy to incorporate existing tools into a framework for advancing soybean genomics research. This workshop identified and ranked research priorities essential to making more informed decisions as to how to proceed with large scale sequencing and other genomics efforts. Most critical among these was the need to finalize a physical map and to obtain a better understanding of genome microstructure. Addressing these research needs will require pilot work on new technologies to demonstrate an ability to discriminate between recently duplicated regions in the soybean genome and pilot projects to analyze an adequate amount of random genome sequence to identify and catalog common repeats. The development of additional markers, reverse genetics tools, and bioinformatics is also necessary. Successful implementation of these goals will require close coordination among various working groups.

Mangrove Cultivation For Dealing With Coastal Abrasion Case Study Of Karangsong

NASA Astrophysics Data System (ADS)

Fatimatuzzahroh, Feti; Hadi, Sudharto P.; Purnaweni, Hartuti

2018-02-01

Coastal abrasion is consequence from destructive waves and sea current. One of cause is human intervention. The effort to solve of abrasion is by mangrove cultivation. Mangroves are halophyte plant that can restrain the sea wave. Mangrove cultivation required participation community that give awareness the importance of mangrove in coastal sustainability. Mangroves in coastal Karangsong, Indramayu west java, in 2007 was through abrasion approximately 127.30 ha. Mangrove cultivation in Karangsong has been replanting since 1998 to 2003, but there was no maintenance and management. In 2007 until 2015 Karangsong replanting mangroves and has been succeed. Karangsong became the center of mangrove study for west java area in 2015. This achievement is result of cooperation between community, NGO, and local government. In addition, this effort made not only overcome the abrasion problem but also give community awareness about the importance of mangrove cultivation in preventing coastal abrasion throughout community development. This paper reviews abrasion in Karangsong and the impact for local community and empowerment in mangrove cultivation. To achieve the success mangrove cultivation required community development approach from planning process, planting, maintenance and management.

Efficient strategies for leave-one-out cross validation for genomic best linear unbiased prediction.

PubMed

Cheng, Hao; Garrick, Dorian J; Fernando, Rohan L

2017-01-01

A random multiple-regression model that simultaneously fit all allele substitution effects for additive markers or haplotypes as uncorrelated random effects was proposed for Best Linear Unbiased Prediction, using whole-genome data. Leave-one-out cross validation can be used to quantify the predictive ability of a statistical model. Naive application of Leave-one-out cross validation is computationally intensive because the training and validation analyses need to be repeated n times, once for each observation. Efficient Leave-one-out cross validation strategies are presented here, requiring little more effort than a single analysis. Efficient Leave-one-out cross validation strategies is 786 times faster than the naive application for a simulated dataset with 1,000 observations and 10,000 markers and 99 times faster with 1,000 observations and 100 markers. These efficiencies relative to the naive approach using the same model will increase with increases in the number of observations. Efficient Leave-one-out cross validation strategies are presented here, requiring little more effort than a single analysis.

Additional Guidance on Prevention of Significant Deterioration (PSD) Regulations

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Significant Figures in Measurements with Uncertainty: A Working Criterion

NASA Astrophysics Data System (ADS)

Vilchis, Abraham

2017-03-01

Generally speaking, students have difficulty reporting out measurements and estimates of quantities used in the laboratory, and with handling the significant figures associated with them. When required to make calculation involving quantities with different numbers of significant figures, they have difficulty in assigning the corresponding digits to the final result. When in addition, the quantities have uncertainty, the operations entailed pose an even greater challenge. The article advocates for some working rules for students (and teachers) in an effort to combat this problem.

Helicopter Rotor Wake Geometry and Its Influence in Forward Flight. Volume 1. Generalized Wake Geometry and Wake Effect on Rotor Airloads and Performance.

DTIC Science & Technology

1983-10-01

performance results similar to an articulated rotor with non -zero flapping wh~ere the appropriate adjustments to blade cyclic controls were made to run at...additional experimental data are required, limited data from previous investigations tend to support these theoretical observations. The occurrence of close...through 10. The scope of this effort has included both analytical and experimental investigation programs, and the development of distorted and

Cybersecurity in Artificial Pancreas Experiments.

PubMed

O'Keeffe, Derek T; Maraka, Spyridoula; Basu, Ananda; Keith-Hynes, Patrick; Kudva, Yogish C

2015-09-01

Medical devices have transformed modern health care, and ongoing experimental medical technology trials (such as the artificial pancreas) have the potential to significantly improve the treatment of several chronic conditions, including diabetes mellitus. However, we suggest that, to date, the essential concept of cybersecurity has not been adequately addressed in this field. This article discusses several key issues of cybersecurity in medical devices and proposes some solutions. In addition, it outlines the current requirements and efforts of regulatory agencies to increase awareness of this topic and to improve cybersecurity.

Analytical prediction of digital signal crosstalk of FCC

NASA Technical Reports Server (NTRS)

Belleisle, A. P.

1972-01-01

The results are presented of study effort whose aim was the development of accurate means of analyzing and predicting signal cross-talk in multi-wire digital data cables. A complete analytical model is developed n + 1 wire systems of uniform transmission lines with arbitrary linear boundary conditions. In addition, a minimum set of parameter measurements required for the application of the model are presented. Comparisons between cross-talk predicted by this model and actual measured cross-talk are shown for a six conductor ribbon cable.

Historic Context and Management Plan for the Quarry Pond Archeological Complex on Fort Drum

DTIC Science & Technology

2012-04-01

owner at that time). The purchase of the entire village and 4,500 acres of adjoining land cost Sterling $10,000; the purchase was made in partnership...roads, all at a cost of $13,000. Additionally, the company provided land for the construction of a Catholic Church, possibly for the Irish laborers that...site for limestone, as the raw stone required significant cost and effort to move any distance. The burnt lime was much reduced in bulk from the

NASA Stennis Space Center Test Technology Branch Activities

NASA Technical Reports Server (NTRS)

Solano, Wanda M.

2000-01-01

This paper provides a short history of NASA Stennis Space Center's Test Technology Laboratory and briefly describes the variety of engine test technology activities and developmental project initiatives. Theoretical rocket exhaust plume modeling, acoustic monitoring and analysis, hand held fire imaging, heat flux radiometry, thermal imaging and exhaust plume spectroscopy are all examples of current and past test activities that are briefly described. In addition, recent efforts and visions focused on accomodating second, third, and fourth generation flight vehicle engine test requirements are discussed.

Department of Energy Efforts to Promote Universal Adherence to the IAEA Additional Protocol

DOE Office of Scientific and Technical Information (OSTI.GOV)

Killinger, Mark H.; Hansen, Linda H.; Kovacic, Don N.

2009-10-06

Entry-into-force of the U.S. Additional Protocol (AP) in January 2009 continues to demonstrate the ongoing commitment by the United States to promote universal adherence to the AP. The AP is a critical tool for improving the International Atomic Energy Agency’s (IAEA) capabilities to detect undeclared activities that indicate a clandestine nuclear weapons program. This is because States Parties are required to provide information about, and access to, nuclear fuel cycle activities beyond their traditional safeguards reporting requirements. As part of the U.S. AP Implementation Act and Senate Resolution of Ratification, the Administration is required to report annually to Congress onmore » measures taken to achieve the adoption of the AP in non-nuclear weapon states, as well as assistance to the IAEA to promote the effective implementation of APs in those states. A key U.S. effort in this area is being managed by the International Nuclear Safeguards and Engagement Program (INSEP) of the U.S. Department of Energy (DOE). Through new and existing bilateral cooperation agreements, INSEP has initiated technical assistance projects for AP implementation with selected non-weapon states. States with which INSEP is currently cooperating include Vietnam and Thailand, with Indonesia, Algeria, Morocco, and other countries as possible future collaborators in the area of AP implementation. The INSEP collaborative model begins with a joint assessment with our partners to identify specific needs they may have regarding entering the AP into force and any impediments to successful implementation. An action plan is then developed detailing and prioritizing the necessary joint activities. Such assistance may include: advice on developing legal frameworks and regulatory documents; workshops to promote understanding of AP requirements; training to determine possible declarable activities; assistance in developing a system to collect and submit declarations; performing industry outreach to raise awareness; guidance for reporting export and manufacturing of “especially designed or prepared” equipment listed in AP Annex I/Annex II; and lastly, developing indigenous capabilities to sustain AP implementation. INSEP also coordinates with the IAEA to ensure the harmonization of the assistance provided by DOE and the IAEA. This paper describes current efforts and future plans for AP international implementation support.« less

Variation of fee-for-service specialist direct care work effort with patient overall illness burden.

PubMed

Goodman, Robert

2011-08-01

To explore whether a common industry measure of overall patient illness burden, used to assess the total costs of members in a health plan, would be suitable to describe variation in a summary metric of utilization that assesses specialist physician direct patient care services not grouped into clinical episodes, but with exclusion criteria applied to reduce any bias in the data. Data sources/study setting Calendar year 2006 administrative data on 153,557 commercial members enrolled in a non-profit single-state statewide Health Maintenance Organization (HMO) and treated by 4356 specialists in 11 specialties. The health plan's global referral process and specialist fee-for-service reimbursement likely makes these results applicable to the non-managed care setting, as once a global referral was authorized there was no required intervention by the HMO or referring primary care provider for the majority of any subsequent specialist direct clinical care. Study design Specialty-specific correlations and ordinary least-squares regression models to assess variations in specialist direct patient care work effort with patient overall illness burden, after the application of exclusion criteria to reduce potential bias in the data. Principle findings Statistically significant positive correlations exist between specialist direct patient care work effort and patient overall illness burden for all studied specialties. Regression models revealed a generally monotonic increasing relationship between illness burden categories and aggregate specialist direct patient care work effort. Almost all regression model differences from the reference category across specialties are statistically significant (P ≤ 0.012). Assessment of additional results demonstrates the relationship has more substantive significance in some specialties and less in others. The most substantive relationships in this study were found in the specialties of orthopaedic surgery, general surgery and interventional cardiology. For many specialties, specialists do vary physician direct patient care utilization with patient overall illness burden. Accounting for patient overall health status is important to fairly compare specialists of certain specialties on utilization for health plan specialist network management. Additional study is required to evaluate health plan application of this methodology.

Capacity for research in minority health: the need for infrastructure plus will.

PubMed

Pearson, T A

2001-11-01

Cardiovascular mortality has continued to decline, but racial disparities in cardiovascular diseases (CVD) continue to grow. To build the capacity to address these racial disparities, two things will be required. First, a research and policy infrastructure must be in place to provide guidance on what to do and how to do it. Second, the will to implement and activate this infrastructure must be present at the community and policy-making levels. The Jackson Heart Study is an example of a research infrastructure with the economic resources, scientific expertise, and technical manpower required to monitor, organize, assess, and follow a cohort of individuals over time to study the burden, natural history, predictive factors, and level of care for CVD in an African American community. The creation of will within the community for CVD research may require additional strategies than in the majority community, such as community organization and local policy development. These additional efforts at the community level should create a fertile environment to develop research and, ultimately, test strategies for reducing national disparities in cardiovascular health.

Acceptance test report for portable exhauster POR-008/Skid F

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriskovich, J.R.

1998-07-24

Portable Exhauster POR-008 was procured via HNF-0490, Specification for a Portable Exhausted System for Waste Tank Ventilation. Prior to taking ownership, acceptance testing was performed at the vendors. However at the conclusion of testing a number of issues remained that required resolution before the exhausters could be used by Project W-320. The purpose of acceptance testing documented by this report was to demonstrate compliance of the exhausters with the performance criteria established within HNF-O49O, Rev. 1 following a repair and upgrade effort at Hanford. In addition, data obtained during this testing is required for the resolution of outstanding Non-conformance Reportsmore » (NCR), and finally, to demonstrate the functionality of the associated software for the pressure control and high vacuum exhauster operating modes provided for by W-320. Additional testing not required by the ATP was also performed to assist in the disposition and close out of receiving inspection report and for application design information (system curve). Results of this testing are also captured within this document.« less

Advanced Gas Turbine (AGT): Power-train system development

NASA Technical Reports Server (NTRS)

Helms, H. E.; Johnson, R. A.; Gibson, R. K.; Smith, L. B.

1983-01-01

Technical work on the design and effort leading to the testing of a 74.5 kW (100 hp) automotive gas turbine is described. The general effort was concentrated on building an engine for test starting in July. The buildup progressed with only routine problems and the engine was delivered to the test stand 9 July. In addition to the engine build effort, work continued in selected component areas. Ceramic turbine parts were built and tested. Burst tests of ceramic rotors show strengths are approaching that achieved in test bars; proof testing is required for acceptable strength ceramic vanes. Over 25 hours was accumulated on the combustor rig in three test modes: pilot nozzle only, start nozzle, and main nozzle operation. Satisfactory ignition was achieved for a wide range of starting speeds and the lean blowout limit was as low as 0.06 kg/b (0.14 lb/hr). Lean blowout was more a function of nozzle atomization than fuel/air ratio. A variety of cycle points were tested. Transition from start nozzle flow to main nozzle flow was done manually without difficulty. Regenerator parts were qualification tested without incident and the parts were assembled on schedule. Rig based performance matched first build requirements. Repeated failures in the harmonic drive gearbox during rig testing resulted in that concept being abandoned for an alternate scheme.

Initial dynamic load estimates during configuration design

NASA Technical Reports Server (NTRS)

Schiff, Daniel

1987-01-01

This analysis includes the structural response to shock and vibration and evaluates the maximum deflections and material stresses and the potential for the occurrence of elastic instability, fatigue and fracture. The required computations are often performed by means of finite element analysis (FEA) computer programs in which the structure is simulated by a finite element model which may contain thousands of elements. The formulation of a finite element model can be time consuming, and substantial additional modeling effort may be necessary if the structure requires significant changes after initial analysis. Rapid methods for obtaining rough estimates of the structural response to shock and vibration are presented for the purpose of providing guidance during the initial mechanical design configuration stage.

Fiscal Year 2016 Revegetation Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nordstrom, Jenifer B.

This report summarizes the Fiscal Year (FY) 2016 Revegetation Assessment by Battelle Energy Alliance, LLC. This assessment was conducted to document revegetation efforts at Idaho National Laboratory to verify restoration of disturbed vegetation and soil at various locations occurs as required. This report provides the following information for projects at Idaho National Laboratory completed during FY 2016 that were identified during the National Environmental Policy Act review process as having the potential to disturb soils or vegetation: 1) A summary of all projects identified as having the potential to require revegetation efforts 2) A summary of site disturbance and restorationmore » efforts of each project. For FY 2016, one project required revegetation and sagebrush restoration. For other projects, implementation of best management practices minimized impacts to vegetation and revegetation efforts were not required.« less

Greater effort increases perceived value in an invertebrate.

PubMed

Czaczkes, Tomer J; Brandstetter, Birgit; di Stefano, Isabella; Heinze, Jürgen

2018-05-01

Expending effort is generally considered to be undesirable. However, both humans and vertebrates will work for a reward they could also get for free. Moreover, cues associated with high-effort rewards are preferred to low-effort associated cues. Many explanations for these counterintuitive findings have been suggested, including cognitive dissonance (self-justification) or a greater contrast in state (e.g., energy or frustration level) before and after an effort-linked reward. Here, we test whether effort expenditure also increases perceived value in ants, using both classical cue-association methods and pheromone deposition, which correlates with perceived value. In 2 separate experimental setups, we show that pheromone deposition is higher toward the reward that requires more effort: 47% more pheromone deposition was performed for rewards reached via a vertical runway (high effort) compared with ones reached via a horizontal runway (low effort), and deposition rates were 28% higher on rough (high effort) versus smooth (low effort) runways. Using traditional cue-association methods, 63% of ants trained on different surface roughness, and 70% of ants trained on different runway elevations, preferred the high-effort related cues on a Y maze. Finally, pheromone deposition to feeders requiring memorization of one path bifurcation was up to 29% higher than to an identical feeder requiring no learning. Our results suggest that effort affects value perception in ants. This effect may stem from a cognitive process, which monitors the change in a generalized hedonic state before and after reward. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Low background materials and fabrication techniques for cables and connectors in the Majorana Demonstrator

DOE PAGES

Busch, M.; Abgrall, N.; Alvis, S. I.; ...

2018-01-03

Here, the Majorana Collaboration is searching for the neutrinoless double-beta decay of the nucleus 76Ge. The Majorana Demonstrator is an array of germanium detectors deployed with the aim of implementing background reduction techniques suitable for a tonne scale 76Ge-based search (the LEGEND collaboration). In the Demonstrator, germanium detectors operate in an ultra-pure vacuum cryostat at 80 K. One special challenge of an ultra-pure environment is to develop reliable cables, connectors, and electronics that do not significantly contribute to the radioactive background of the experiment. This paper highlights the experimental requirements and how these requirements were met for the Majorana Demonstrator,more » including plans to upgrade the wiring for higher reliability in the summer of 2018. Also described are requirements for LEGEND R&D efforts underway to meet these additional requirements« less

How should support for climate-friendly technologies be designed?

PubMed

Fischer, Carolyn; Torvanger, Asbjørn; Shrivastava, Manish Kumar; Sterner, Thomas; Stigson, Peter

2012-01-01

Stabilizing global greenhouse gas concentrations at levels to avoid significant climate risks will require massive "decarbonization" of all the major economies over the next few decades, in addition to the reduced emissions from other GHGs and carbon sequestration. Achieving the necessary scale of emissions reductions will require a multifaceted policy effort to support a broad array of technological and behavioral changes. Change on this scale will require sound, well-thought-out strategies. In this article, we outline some core principles, drawn from recent social science research, for guiding the design of clean technology policies, with a focus on energy. The market should be encouraged to make good choices: pricing carbon emissions and other environmental damage, removing distorting subsidies and barriers to competition, and supporting RD&D broadly. More specific policies are required to address particular market failures and barriers. For those technologies identified as being particularly desirable, some narrower RD&D policies are available.

A case study on topology optimized design for additive manufacturing

NASA Astrophysics Data System (ADS)

Gebisa, A. W.; Lemu, H. G.

2017-12-01

Topology optimization is an optimization method that employs mathematical tools to optimize material distribution in a part to be designed. Earlier developments of topology optimization considered conventional manufacturing techniques that have limitations in producing complex geometries. This has hindered the topology optimization efforts not to fully be realized. With the emergence of additive manufacturing (AM) technologies, the technology that builds a part layer upon a layer directly from three dimensional (3D) model data of the part, however, producing complex shape geometry is no longer an issue. Realization of topology optimization through AM provides full design freedom for the design engineers. The article focuses on topologically optimized design approach for additive manufacturing with a case study on lightweight design of jet engine bracket. The study result shows that topology optimization is a powerful design technique to reduce the weight of a product while maintaining the design requirements if additive manufacturing is considered.

Strengthening materials specifications

NASA Astrophysics Data System (ADS)

Sampath, K.

2005-10-01

Continuing efforts to strengthen materials specifications readily recognize that a mere compliance with a materials specification only assures a material meeting or exceeding the minimum expectations explicitly detailed in the specification. Implicitly, such efforts also recognize that additional and specific client needs must be addressed as supplementary requirements and introduced during material procurement to reduce risks and assure enhanced performance. This article describes two U.S. Navy-related case studies that allowed further strengthening of the materials specification process, using newer methods and renewed understanding. The first case demonstrates the use of a constraints-based modeling approach to specify the chemical composition of high-performance welding electrodes for critical U.S. Navy applications. This approach helps to distinguish high-performance welding electrode chemical compositions from rich and lean welding electrode chemical compositions that might limit the operational envelope, reduce performance, or both, while increasing overall cost of fabrication but otherwise meet electrode specification requirements. The second case identifies that the size of an ingot could be an important factor while specifying the aluminum and sulfur contents of very large-size, heavy-gauge plates. Renewed understanding of melt fluidity issues associated with the solidification of very large-size ingots shows that deficiencies in through-thickness ductility of heavy-gauge plates are related to controlling aluminum and sulfur contents of the voluminous melt, notwithstanding explicit compliance with specification requirements.

Process' standardization and change management in higher education. The case of TEI of Athens

NASA Astrophysics Data System (ADS)

Chalaris, Ioannis; Chalaris, Manolis; Gritzalis, Stefanos; Belsis, Petros

2015-02-01

The establishment of mature operational procedures and the effort of standardizing and certifying these procedures is a particularly arduous and demanding task which requires strong commitment from management to the existing objectives, administrative stability and continuity, availability of resources, an adequate implementation team with support from all stakeholders and of course great tolerance until tangible results of the investment are shown. Ensuring these conditions, particularly in times of economic crisis, is an extremely difficult task for large organizations such as TEI of Athens where there is heterogeneity in personnel and changes in the administrative hierarchy arise plethora of additional difficulties and require an effective change management. In this work we depict the path of standardization and certification of administrative functions of TEI of Athens, with emphasis on difficulties encountered and how to address them and in particular issues of change management and the culture related to this effort. The requirement for infrastructure needed to be maintained in processes and tools process & strategic management is embodied, in order to evolve mechanisms for continuous improvement processes and storage / recovery of the resulting knowledge. The work concludes with a general design of a road map of internal audit and continuous improvement processes for a large institution of higher education.

Ares I-X Range Safety Simulation and Analysis IV and V

NASA Technical Reports Server (NTRS)

Merry, Carl M.; Brewer, Joan D.; Dulski, Matt B.; Gimenez, Adrian; Barron, Kyle; Tarpley, Ashley F.; Craig, A. Scott; Beaty, Jim R.; Starr, Brett R.

2011-01-01

NASA s Ares I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. NASA generated a Range Safety (RS) product data package to meet the RS trajectory data requirements defined in the Air Force Space Command Manual (AFSPCMAN) 91-710. Some products included were a nominal ascent trajectory, ascent flight envelopes, and malfunction turn data. These products are used by the Air Force s 45th Space Wing (45SW) to ensure public safety and to make flight termination decisions on launch day. Due to the criticality of the RS data, an independent validation and verification (IV&V) effort was undertaken to accompany the data generation analyses to ensure utmost data quality and correct adherence to requirements. As a result of the IV&V efforts, the RS product package was delivered with confidence that two independent organizations using separate simulation software generated data to meet the range requirements and yielded similar results. This document captures the Ares I-X RS product IV&V analysis, including the methodology used to verify inputs, simulation, and output data for certain RS products. Additionally a discussion of lessons learned is presented to capture advantages and disadvantages to the IV&V processes used.

Technology Transfer Challenges: A Case Study of User-Centered Design in NASA's Systems Engineering Culture

NASA Technical Reports Server (NTRS)

Quick, Jason

2009-01-01

The Upper Stage (US) section of the National Aeronautics and Space Administration's (NASA) Ares I rocket will require internal access platforms for maintenance tasks performed by humans inside the vehicle. Tasks will occur during expensive critical path operations at Kennedy Space Center (KSC) including vehicle stacking and launch preparation activities. Platforms must be translated through a small human access hatch, installed in an enclosed worksite environment, support the weight of ground operators and be removed before flight - and their design must minimize additional vehicle mass at attachment points. This paper describes the application of a user-centered conceptual design process and the unique challenges encountered within NASA's systems engineering culture focused on requirements and "heritage hardware". The NASA design team at Marshall Space Flight Center (MSFC) initiated the user-centered design process by studying heritage internal access kits and proposing new design concepts during brainstorming sessions. Simultaneously, they partnered with the Technology Transfer/Innovative Partnerships Program to research inflatable structures and dynamic scaffolding solutions that could enable ground operator access. While this creative, technology-oriented exploration was encouraged by upper management, some design stakeholders consistently opposed ideas utilizing novel, untested equipment. Subsequent collaboration with an engineering consulting firm improved the technical credibility of several options, however, there was continued resistance from team members focused on meeting system requirements with pre-certified hardware. After a six-month idea-generating phase, an intensive six-week effort produced viable design concepts that justified additional vehicle mass while optimizing the human factors of platform installation and use. Although these selected final concepts closely resemble heritage internal access platforms, challenges from the application of the user-centered process provided valuable lessons for improving future collaborative conceptual design efforts.

The influence of music on mental effort and driving performance.

PubMed

Ünal, Ayça Berfu; Steg, Linda; Epstude, Kai

2012-09-01

The current research examined the influence of loud music on driving performance, and whether mental effort mediated this effect. Participants (N=69) drove in a driving simulator either with or without listening to music. In order to test whether music would have similar effects on driving performance in different situations, we manipulated the simulated traffic environment such that the driving context consisted of both complex and monotonous driving situations. In addition, we systematically kept track of drivers' mental load by making the participants verbally report their mental effort at certain moments while driving. We found that listening to music increased mental effort while driving, irrespective of the driving situation being complex or monotonous, providing support to the general assumption that music can be a distracting auditory stimulus while driving. However, drivers who listened to music performed as well as the drivers who did not listen to music, indicating that music did not impair their driving performance. Importantly, the increases in mental effort while listening to music pointed out that drivers try to regulate their mental effort as a cognitive compensatory strategy to deal with task demands. Interestingly, we observed significant improvements in driving performance in two of the driving situations. It seems like mental effort might mediate the effect of music on driving performance in situations requiring sustained attention. Other process variables, such as arousal and boredom, should also be incorporated to study designs in order to reveal more on the nature of how music affects driving. Copyright © 2012 Elsevier Ltd. All rights reserved.

40 CFR 33.301 - What does this subpart require?

Code of Federal Regulations, 2014 CFR

2014-07-01

... AGENCY PROGRAMS Good Faith Efforts § 33.301 What does this subpart require? A recipient, including one... good faith efforts whenever procuring construction, equipment, services and supplies under an EPA...

40 CFR 33.301 - What does this subpart require?

Code of Federal Regulations, 2013 CFR

2013-07-01

... AGENCY PROGRAMS Good Faith Efforts § 33.301 What does this subpart require? A recipient, including one... good faith efforts whenever procuring construction, equipment, services and supplies under an EPA...

40 CFR 33.301 - What does this subpart require?

Code of Federal Regulations, 2012 CFR

2012-07-01

... AGENCY PROGRAMS Good Faith Efforts § 33.301 What does this subpart require? A recipient, including one... good faith efforts whenever procuring construction, equipment, services and supplies under an EPA...

40 CFR 33.301 - What does this subpart require?

Code of Federal Regulations, 2011 CFR

2011-07-01

... AGENCY PROGRAMS Good Faith Efforts § 33.301 What does this subpart require? A recipient, including one... good faith efforts whenever procuring construction, equipment, services and supplies under an EPA...

NASA reload program

NASA Technical Reports Server (NTRS)

Byington, Marshall

1993-01-01

Atlantic Research Corporation (ARC) contracted with NASA to manufacture and deliver thirteen small scale Solid Rocket Motors (SRM). These motors, containing five distinct propellant formulations, will be used for plume induced radiation studies. The information contained herein summarizes and documents the program accomplishments and results. Several modifications were made to the scope of work during the course of the program. The effort was on hold from late 1991 through August, 1992 while propellant formulation changes were developed. Modifications to the baseline program were completed in late-August and Modification No. 6 was received by ARC on September 14, 1992. The modifications include changes to the propellant formulation and the nozzle design. The required motor deliveries were completed in late-December, 1992. However, ARC agreed to perform an additional mix and cast effort at no cost to NASA and another motor was delivered in March, 1993.

Standardization Efforts for Mechanical Testing and Design of Advanced Ceramic Materials and Components

NASA Technical Reports Server (NTRS)

Salem, Jonathan A.; Jenkins, Michael G.

2003-01-01

Advanced aerospace systems occasionally require the use of very brittle materials such as sapphire and ultra-high temperature ceramics. Although great progress has been made in the development of methods and standards for machining, testing and design of component from these materials, additional development and dissemination of standard practices is needed. ASTM Committee C28 on Advanced Ceramics and ISO TC 206 have taken a lead role in the standardization of testing for ceramics, and recent efforts and needs in standards development by Committee C28 on Advanced Ceramics will be summarized. In some cases, the engineers, etc. involved are unaware of the latest developments, and traditional approaches applicable to other material systems are applied. Two examples of flight hardware failures that might have been prevented via education and standardization will be presented.

A mid-term analysis of progress toward international biodiversity targets.

PubMed

Tittensor, Derek P; Walpole, Matt; Hill, Samantha L L; Boyce, Daniel G; Britten, Gregory L; Burgess, Neil D; Butchart, Stuart H M; Leadley, Paul W; Regan, Eugenie C; Alkemade, Rob; Baumung, Roswitha; Bellard, Céline; Bouwman, Lex; Bowles-Newark, Nadine J; Chenery, Anna M; Cheung, William W L; Christensen, Villy; Cooper, H David; Crowther, Annabel R; Dixon, Matthew J R; Galli, Alessandro; Gaveau, Valérie; Gregory, Richard D; Gutierrez, Nicolas L; Hirsch, Tim L; Höft, Robert; Januchowski-Hartley, Stephanie R; Karmann, Marion; Krug, Cornelia B; Leverington, Fiona J; Loh, Jonathan; Lojenga, Rik Kutsch; Malsch, Kelly; Marques, Alexandra; Morgan, David H W; Mumby, Peter J; Newbold, Tim; Noonan-Mooney, Kieran; Pagad, Shyama N; Parks, Bradley C; Pereira, Henrique M; Robertson, Tim; Rondinini, Carlo; Santini, Luca; Scharlemann, Jörn P W; Schindler, Stefan; Sumaila, U Rashid; Teh, Louise S L; van Kolck, Jennifer; Visconti, Piero; Ye, Yimin

2014-10-10

In 2010, the international community, under the auspices of the Convention on Biological Diversity, agreed on 20 biodiversity-related "Aichi Targets" to be achieved within a decade. We provide a comprehensive mid-term assessment of progress toward these global targets using 55 indicator data sets. We projected indicator trends to 2020 using an adaptive statistical framework that incorporated the specific properties of individual time series. On current trajectories, results suggest that despite accelerating policy and management responses to the biodiversity crisis, the impacts of these efforts are unlikely to be reflected in improved trends in the state of biodiversity by 2020. We highlight areas of societal endeavor requiring additional efforts to achieve the Aichi Targets, and provide a baseline against which to assess future progress. Copyright © 2014, American Association for the Advancement of Science.

Applying environmental product design to biomedical products research.

PubMed Central

Messelbeck, J; Sutherland, L

2000-01-01

The principal themes for the Biomedical Research and the Environment Conference Committee on Environmental Economics in Biomedical Research include the following: healthcare delivery companies and biomedical research organizations, both nonprofit and for-profit, need to improve their environmental performance; suppliers of healthcare products will be called upon to support this need; and improving the environmental profile of healthcare products begins in research and development (R&D). The committee report begins with requirements from regulatory authorities (e.g., U.S. Environmental Protection Agency [EPA], the U.S. Food and Drug Administration), and the healthcare delivery sector). The 1998 American Hospital Association and EPA Memorandum of Understanding to reduce solid waste and mercury from healthcare facilities is emblematic of these requirements. The dominant message from the requirements discussion is to ensure that R&D organizations do not ignore customer, environmental, and regulatory requirements in the early stages of product development. Several representatives from healthcare products manufacturers presented their companies' approaches to meeting these requirements. They reported on efforts to ensure that their R&D processes are sensitive to the environmental consequences from manufacturing, distributing, using, and disposing of healthcare products. These reports describe representatives' awareness of requirements and the unique approaches their R&D organizations have taken to meet these requirements. All representatives reported that their R&D organizations have embraced environmental product design because it avoids the potential of returning products to R&D to improve the environmental profile. Additionally, several reports detailed cost savings, sustainability benefits, and improvements in environmental manufacturing or redesign, and increased customer satisfaction. Many companies in healthcare delivery are working to improve environmental performance. Fundamental to these efforts is the necessity of motivating suppliers to improve the environmental profile of new products used in the healthcare delivery sector. PMID:11121364

Applying environmental product design to biomedical products research.

PubMed

Messelbeck, J; Sutherland, L

2000-12-01

The principal themes for the Biomedical Research and the Environment Conference Committee on Environmental Economics in Biomedical Research include the following: healthcare delivery companies and biomedical research organizations, both nonprofit and for-profit, need to improve their environmental performance; suppliers of healthcare products will be called upon to support this need; and improving the environmental profile of healthcare products begins in research and development (R&D). The committee report begins with requirements from regulatory authorities (e.g., U.S. Environmental Protection Agency [EPA], the U.S. Food and Drug Administration), and the healthcare delivery sector). The 1998 American Hospital Association and EPA Memorandum of Understanding to reduce solid waste and mercury from healthcare facilities is emblematic of these requirements. The dominant message from the requirements discussion is to ensure that R&D organizations do not ignore customer, environmental, and regulatory requirements in the early stages of product development. Several representatives from healthcare products manufacturers presented their companies' approaches to meeting these requirements. They reported on efforts to ensure that their R&D processes are sensitive to the environmental consequences from manufacturing, distributing, using, and disposing of healthcare products. These reports describe representatives' awareness of requirements and the unique approaches their R&D organizations have taken to meet these requirements. All representatives reported that their R&D organizations have embraced environmental product design because it avoids the potential of returning products to R&D to improve the environmental profile. Additionally, several reports detailed cost savings, sustainability benefits, and improvements in environmental manufacturing or redesign, and increased customer satisfaction. Many companies in healthcare delivery are working to improve environmental performance. Fundamental to these efforts is the necessity of motivating suppliers to improve the environmental profile of new products used in the healthcare delivery sector.

Characterization of Metal Powders Used for Additive Manufacturing.

PubMed

Slotwinski, J A; Garboczi, E J; Stutzman, P E; Ferraris, C F; Watson, S S; Peltz, M A

2014-01-01

Additive manufacturing (AM) techniques can produce complex, high-value metal parts, with potential applications as critical parts, such as those found in aerospace components. The production of AM parts with consistent and predictable properties requires input materials (e.g., metal powders) with known and repeatable characteristics, which in turn requires standardized measurement methods for powder properties. First, based on our previous work, we assess the applicability of current standardized methods for powder characterization for metal AM powders. Then we present the results of systematic studies carried out on two different powder materials used for additive manufacturing: stainless steel and cobalt-chrome. The characterization of these powders is important in NIST efforts to develop appropriate measurements and standards for additive materials and to document the property of powders used in a NIST-led additive manufacturing material round robin. An extensive array of characterization techniques was applied to these two powders, in both virgin and recycled states. The physical techniques included laser diffraction particle size analysis, X-ray computed tomography for size and shape analysis, and optical and scanning electron microscopy. Techniques sensitive to structure and chemistry, including X-ray diffraction, energy dispersive analytical X-ray analysis using the X-rays generated during scanning electron microscopy, and X-Ray photoelectron spectroscopy were also employed. The results of these analyses show how virgin powder changes after being exposed to and recycled from one or more Direct Metal Laser Sintering (DMLS) additive manufacturing build cycles. In addition, these findings can give insight into the actual additive manufacturing process.

Predictors of 4-Year Retention Among African American and White Community-Dwelling Participants in the UAB Study of Aging

PubMed Central

Allman, Richard M.; Sawyer, Patricia; Crowther, Martha; Strothers, Harry S.; Turner, Timothy; Fouad, Mona N.

2011-01-01

Purpose: To identify racial/ethnic differences in retention of older adults at 3 levels of participation in a prospective observational study: telephone, in-home assessments, and home visits followed by blood draws. Design and Methods: A prospective study of 1,000 community-dwelling Medicare beneficiaries aged 65 years and older included a baseline in-home assessment and telephone follow-up calls at 6-month intervals; at 4 years, participants were asked to complete an additional in-home assessment and have blood drawn. Results: After 4 years, 21.7% died and 0.7% withdrew, leaving 776 participants eligible for follow-up (49% African American; 46% male; 51% rural). Retention for telephone follow-up was 94.5% (N = 733/776); 624/733 (85.1%) had home interviews, and 408/624 (65.4%) had a nurse come to the home for the blood draw. African American race was an independent predictor of participation in in-home assessments, but African American race and rural residence were independent predictors of not participating in a blood draw. Implications: Recruitment efforts designed to demonstrate respect for all research participants, home visits, and telephone follow-up interviews facilitate high retention rates for both African American and White older adults; however, additional efforts are required to enhance participation of African American and rural participants in research requiring blood draws. PMID:21565818

Environmental Gap Analysis to Prioritize Conservation Efforts in Eastern Africa

PubMed Central

van Breugel, Paulo; Kindt, Roeland; Lillesø, Jens-Peter Barnekow; van Breugel, Michiel

2015-01-01

Countries in eastern Africa have set aside significant proportions of their land for protection. But are these areas representative of the diverse range of species and habitats found in the region? And do conservation efforts include areas where the state of biodiversity is likely to deteriorate without further interventions? Various studies have addressed these questions at global and continental scales. However, meaningful conservation decisions are required at finer geographical scales. To operate more effectively at the national level, finer scale baseline data on species and on higher levels of biological organization such as the eco-regions are required, among other factors. Here we adopted a recently developed high-resolution potential natural vegetation (PNV) map for eastern Africa as a baseline to more effectively identify conservation priorities. We examined how well different potential natural vegetations (PNVs) are represented in the protected area (PA) network of eastern Africa and used a multivariate environmental similarity index to evaluate biases in PA versus PNV coverage. We additionally overlaid data of anthropogenic factors that potentially influence the natural vegetation to assess the level of threat to different PNVs. Our results indicate substantial differences in the conservation status of PNVs. In addition, particular PNVs in which biodiversity protection and ecological functions are at risk due to human influences are revealed. The data and approach presented here provide a step forward in developing more transparent and better informed translation from global priorities to regional or national implementation in eastern Africa, and are valid for other geographic regions. PMID:25855968

Hearing is prelude to senate showdown on climate change

NASA Astrophysics Data System (ADS)

Showstack, Randy

Two U.S. senators who are sponsoring legislation to reduce greenhouse gas emissions have indicated that they will loosen the reduction requirements in an effort to attract additional support for the bill. Senators John McCain (R-Arizona) and Joseph Lieberman (D-Connecticut) indicated they will offer the amended version in preparation for a Senate showdown on climate change expected later this fall.The Climate Stewardship Act of 2003 (S.139), originally introduced in January 2003, still would promote climate research, establish a mandatory carbon dioxide reduction program, and require affected industry sectors to reduce greenhouse emissions to year 2000 levels by the year 2010. However, McCain said the bill no longer would require further reductions, by the year 2016, to levels that existed in 1990. The bill also would be far less rigorous than the Kyoto Protocol.

Mission-oriented requirements for updating MIL-H-8501: Calspan proposed structure and rationale

NASA Technical Reports Server (NTRS)

Chalk, C. R.; Radford, R. C.

1985-01-01

This report documents the effort by Arvin/Calspan Corporation to formulate a revision of MIL-H-8501A in terms of Mission-Oriented Flying Qualities Requirements for Military Rotorcraft. Emphasis is placed on development of a specification structure which will permit addressing Operational Missions and Flight Phases, Flight Regions, Classification of Required Operational Capability, Categorization of Flight Phases, and Levels of Flying Qualities. A number of definitions is established to permit addressing the rotorcraft state, flight envelopes, environments, and the conditions under which degraded flying qualities are permitted. Tentative requirements are drafted for Required Operational Capability Class 1. Also included is a Background Information and Users Guide for the draft specification structure proposed for the MIL-H-8501A revision. The report also contains a discussion of critical data gaps and attempts to prioritize these data gaps and to suggest experiments that should be performed to generate data needed to support formulation of quantitative design criteria for the additional Operational Capability Classes 2, 3, and 4.

OAST Space Theme Workshop. Volume 3: Working group summary. 1: Navigation, guidance, control (E-1) A. Statement. B. Technology needs (form 1). C. Priority assessment (form 2)

NASA Technical Reports Server (NTRS)

1976-01-01

The six themes identified by the Workshop have many common navigation guidance and control needs. All the earth orbit themes have a strong requirement for attitude, figure and stabilization control of large space structures, a requirement not currently being supported. All but the space transportation theme have need for precision pointing of spacecraft and instruments. In addition all the themes have requirements for increasing autonomous operations for such activities as spacecraft and experiment operations, onboard mission modification, rendezvous and docking, spacecraft assembly and maintenance, navigation and guidance, and self-checkout, test and repair. Major new efforts are required to conceptualize new approaches to large space antennas and arrays that are lightweight, readily deployable, and capable of precise attitude and figure control. Conventional approaches offer little hope of meeting these requirements. Functions that can benefit from increasing automation or autonomous operations are listed.

Towards Integrated Pulse Detonation Propulsion and MHD Power

NASA Technical Reports Server (NTRS)

Litchford, Ron J.; Thompson, Bryan R.; Lineberry, John T.

1999-01-01

The interest in pulse detonation engines (PDE) arises primarily from the advantages that accrue from the significant combustion pressure rise that is developed in the detonation process. Conventional rocket engines, for example, must obtain all of their compression from the turbopumps, while the PDE provides additional compression in the combustor. Thus PDE's are expected to achieve higher I(sub sp) than conventional rocket engines and to require smaller turbopumps. The increase in I(sub sp) and the decrease in turbopump capacity must be traded off against each other. Additional advantages include the ability to vary thrust level by adjusting the firing rate rather than throttling the flow through injector elements. The common conclusion derived from these aggregated performance attributes is that PDEs should result in engines which are smaller, lower in cost, and lighter in weight than conventional engines. Unfortunately, the analysis of PDEs is highly complex due to their unsteady operation and non-ideal processes. Although the feasibility of the basic PDE concept has been proven in several experimental and theoretical efforts, the implied performance improvements have yet to be convincingly demonstrated. Also, there are certain developmental issues affecting the practical application of pulse detonation propulsion systems which are yet to be fully resolved. Practical detonation combustion engines, for example, require a repetitive cycle of charge induction, mixing, initiation/propagation of the detonation wave, and expulsion/scavenging of the combustion product gases. Clearly, the performance and power density of such a device depends upon the maximum rate at which this cycle can be successfully implemented. In addition, the electrical energy required for direct detonation initiation can be significant, and a means for direct electrical power production is needed to achieve self-sustained engine operation. This work addresses the technological issues associated with PDEs for integrated aerospace propulsion and MHD power. An effort is made to estimate the energy requirements for direct detonation initiation of potential fuel/oxidizer mixtures and to determine the electrical power requirements. This requirement is evaluated in terms of the possibility for MHD power generation using the combustion detonation wave. Small scale laboratory experiments were conducted using stoichiometric mixtures of acetylene and oxygen with an atomized spray of cesium hydroxide dissolved in alcohol as an ionization seed in the active MHD region. Time resolved thrust and MHD power generation measurements were performed. These results show that PDEs yield higher I(sub sp) levels than a comparable rocket engine and that MHD power generation is viable candidate for achieving self-excited engine operation.

Dual-Shaft Electric Propulsion (DSEP) Technology Development Program

NASA Astrophysics Data System (ADS)

1992-08-01

The background, progress, and current state of the DOE-sponsored Advanced Dual-Shaft Electric Propulsion Technology Development are presented. Three electric-drive vehicles were build as conversions of a commercial gasoline-powered van, using program-designed components and systems as required. The vehicles were tested primarily on dynamometer or test tract. Component and system testing represented a major portion of the development effort. Test data are summarized in this report, and an Appendix contains the final component design specifications. This major programmatic concerns were the traction battery, the battery management system, the dc-to-ac inverter, the drive motor, the transaxle and its ancillary equipment, and the vehicle controller. Additional effort was devoted to vehicle-related equipment: gear selector, power steering, power brakes, accelerator, dashboard instrumentation, and heater. Design, development, and test activities are reported for each of these items, together with an appraisal (lessons learned) and recommendations for possible further work. Other programmatic results include a Cost and Commercialization Analysis, a Reliability and Hazards Analysis Study, Technical Recommendations for Next-Generation Development, and an assessment of overall program efforts.

Second-generation detector work in Israel

NASA Astrophysics Data System (ADS)

Rosenfeld, David

2001-10-01

A tremendous developmental effort in the field of infrared detectors during the last decade in Israel has resulted in a variety of InSb and HgCdTe infrared detectors. Additional and significant R&D effort associated with other IR components, have also been done in Israel, in order to integrate the detectors into advanced Detector-Dewar-Cooler assemblies (DDCs). This R&D effort included notable activities in the field of materials, signal processors, dewars and cryocoolers. These activities are presented together with the status of infrared detector work in Israel. Several two-dimensional InSb staring detectors and DDCs are demonstrated. This includes two versions of the classical 256 X 256 detectors and DDCs, improved 640 X 480 InSb detectors and DDC, and a 2000- element detector with high TDI level. SADA II type HgCdTe detectors are also presented. Considerations regarding the course of future detector work are also described. The classical DDC requirement list which traditionally included demands for high D*, low NETD and high resolution is widened to include cost related issues such as higher reliability, lower maintenance, smaller volume, lower power consumption and higher operation temperature.

The Challenging Pupil in the Classroom: Child Effects on Teachers

PubMed Central

Houts, Renate M.; Caspi, Avshalom; Pianta, Robert C.; Arseneault, Louise; Moffitt, Terrie E.

2012-01-01

Teaching children requires effort and some children naturally require more effort than others. This study tests whether teacher effort devoted to individual children varies as a function of children’s personal characteristics. Using a nation-wide longitudinal study of twins followed between ages 5-12 years, we asked teachers about the effort they invested in each child enrolled in our study. We found that teacher effort was a function of heritable child characteristics; that children’s challenging behavior assessed at age 5 predicted teacher effort at age 12; and that challenging child behavior and teacher effort share common etiology in children’s genes. While child effects accounted for a significant proportion of variance in teacher effort, we also found variation that could not be attributed to children’s behavior. Treating children with challenging behavior and enhancing teachers’ skills in behavior management could increase the time and energy teachers have to deliver curriculum in their classrooms. PMID:21078897

Using task effort and pupil size to track covert shifts of visual attention independently of a pupillary light reflex.

PubMed

Brocher, Andreas; Harbecke, Raphael; Graf, Tim; Memmert, Daniel; Hüttermann, Stefanie

2018-03-07

We tested the link between pupil size and the task effort involved in covert shifts of visual attention. The goal of this study was to establish pupil size as a marker of attentional shifting in the absence of luminance manipulations. In three experiments, participants evaluated two stimuli that were presented peripherally, appearing equidistant from and on opposite sides of eye fixation. The angle between eye fixation and the peripherally presented target stimuli varied from 12.5° to 42.5°. The evaluation of more distant stimuli led to poorer performance than did the evaluation of more proximal stimuli throughout our study, confirming that the former required more effort than the latter. In addition, in Experiment 1 we found that pupil size increased with increasing angle and that this effect could not be reduced to the operation of low-level visual processes in the task. In Experiment 2 the pupil dilated more strongly overall when participants evaluated the target stimuli, which required shifts of attention, than when they merely reported on the target's presence versus absence. Both conditions yielded larger pupils for more distant than for more proximal stimuli, however. In Experiment 3, we manipulated task difficulty more directly, by changing the contrast at which the target stimuli were presented. We replicated the results from Experiment 1 only with the high-contrast stimuli. With stimuli of low contrast, ceiling effects in pupil size were observed. Our data show that the link between task effort and pupil size can be used to track the degree to which an observer covertly shifts attention to or detects stimuli in peripheral vision.

Instrumentation Performance During the TMI-2 Accident

NASA Astrophysics Data System (ADS)

Rempe, Joy L.; Knudson, Darrell L.

2014-08-01

The accident at the Three Mile Island Unit 2 (TMI-2) reactor provided a unique opportunity to evaluate sensors exposed to severe accident conditions. The loss of coolant and the hydrogen combustion that occurred during this accident exposed instrumentation to harsh conditions, including direct radiation, radioactive contamination, and high humidity with elevated temperatures and pressures. As part of a program initiated by the Department of Energy Office of Nuclear Energy (DOE-NE), a review was completed to gain insights from prior TMI-2 sensor survivability and data qualification efforts. This new effort focused upon a set of sensors that provided critical data to TMI-2 operators for assessing the condition of the plant and the effects of mitigating actions taken by these operators. In addition, the effort considered sensors providing data required for subsequent accident simulations. Over 100 references related to instrumentation performance and post-accident evaluations of TMI-2 sensors and measurements were reviewed. Insights gained from this review are summarized within this paper. As noted within this paper, several techniques were invoked in the TMI-2 post-accident program to evaluate sensor survivability status and data qualification, including comparisons with data from other sensors, analytical calculations, laboratory testing, and comparisons with sensors subjected to similar conditions in large-scale integral tests and with sensors that were similar in design but more easily removed from the TMI-2 plant for evaluations. Conclusions from this review provide important insights related to sensor survivability and enhancement options for improving sensor performance. In addition, this paper provides recommendations related to sensor survivability and the data evaluation process that could be implemented in upcoming Fukushima Daiichi recovery efforts.

Battery energy-storage systems — an emerging market for lead/acid batteries

NASA Astrophysics Data System (ADS)

Cole, J. F.

Although the concept of using batteries for lead levelling and peak shaving has been known for decades, only recently have these systems become commercially viable. Changes in the structure of the electric power supply industry have required these companies to seek more cost-effective ways of meeting the needs of their customers. Through experience gained, primarily in the USA, batteries have been shown to provide multiple benefits to electric utilities. Also, lower maintenance batteries, more reliable electrical systems, and the availability of methods to predict costs and benefits have made battery energy-storage systems more attractive. Technology-transfer efforts in the USA have resulted in a willingness of electric utilities to install a number of these systems for a variety of tasks, including load levelling, peak shaving, frequency regulation and spinning reserve. Additional systems are being planned for several additional locations for similar applications, plus transmission and distribution deferral and enhanced power quality. In the absence of US champions such as the US Department of Energy and the Electric Power Research Institute, ILZRO is attempting to mount a technology-transfer programme to bring the benefits of battery energy-storage to European power suppliers. As a result of these efforts, a study group on battery energy-storage systems has been established with membership primarily in Germany and Austria. Also, a two-day workshop, prepared by the Electric Power Research Institute was held in Dublin. Participants included representatives of several European power suppliers. As a result, ESB National Grid of Ireland has embarked upon a detailed analysis of the costs and benefits of a battery energy-storage system in their network. Plans for the future include continuation of this technology-transfer effort, assistance in the Irish effort, and a possible approach to the European Commission for funding.

Whooping crane recovery plan

USGS Publications Warehouse

Olsen, David L.; Blankenship, David R.; Irby, Harold D.; Erickson, Ray C.; Lock, Ross; Drewien, Roderick C.; Smith, Lawrence S.; Derrickson, Scott R.

1980-01-01

This plan has been prepared under the authority of the Endangered Species Act of 1973 and subsequent amendments. The Plan is designed to provide decision makers with an orderly set of events which, if carried out to a successful completion, will result in changing the status of the species from the endangered to the threatened level. It must be recognized that this Plan has been prepared 40 years after attempts to preserve the species began. As such, it covers events that have taken place, that are taking place, and that need to take place. The Plan, therefore, not only compiles in one place all whooping crane management and research efforts which are underway, but also proposes additional efforts needed for the recovery of the whooping crane. The Plan also establishes funding evels, time schedules, and priorities for each management and research effort.The Plan is organized into three parts. the first part includes an account of the whooping crane's history, biology, present status, and the factors believed to have resulted in its endangered status. Also included in this part is a synopsis of research and management activities that have taken place through 1978.The second part is a step-down pan wherein all existing and needed research and management efforts are organized into an orderly set of events. The prime objective is to move the whooping crane to non-endangered status. Minimum requirements for the attainment of this objective are the increase of the historical Wood Buffalo-Aransas population to at least 40 nesting pairs and the establishment of at least two additional, separate, and self-sustaining populations consisting of at least 20 nesting pairs each.the third part identifies the responsibility, time schedule, and cost for each element of the step-down plan.

Defense Additive Manufacturing: DOD Needs to Systematically Track Department-wide 3D Printing Efforts

DTIC Science & Technology

2015-10-01

Clip Additively Manufactured • The Navy installed a 3D printer aboard the USS Essex to demonstrate the ability to additively develop and produce...desired result and vision to have the capability on the fleet. These officials stated that the Navy plans to install 3D printers on two additional...DEFENSE ADDITIVE MANUFACTURING DOD Needs to Systematically Track Department-wide 3D Printing Efforts Report to

Growing a Colony from an Outpost - The Colonization of Mars in the Twenty-Second Century

NASA Astrophysics Data System (ADS)

Halyard, R. J.

Near the end of the Twenty-first Century there may be one or more permanent outposts on Mars; these outposts will recycle their water and atmosphere and remain permanently staffed. The Earth will provide crew rotation plus food supplies and replacement equipment approximately every one and one-half years. Assuming that the permanent outposts are located near deposits of frozen water and necessary minerals, the potential exists of expanding these outposts to a small, self-sufficient colony. Additional equipment, structures and personnel plus changes in operations will be required to make the expansion to a colony possible. Because many variables and assumptions exist in the determination of the additional hardware, the resulting proposed colony design is very tentative and provides only as an initial estimate of the effort required. However if the assumptions are met and the equipment indicated developed, it should definitely be possible to establish a Mars colony in the early Twenty-second Century.

Scientific Utopia: An agenda for improving scientific communication (Invited)

NASA Astrophysics Data System (ADS)

Nosek, B.

2013-12-01

The scientist's primary incentive is publication. In the present culture, open practices do not increase chances of publication, and they often require additional work. Practicing the abstract scientific values of openness and reproducibility thus requires behaviors in addition to those relevant for the primary, concrete rewards. When in conflict, concrete rewards are likely to dominate over abstract ones. As a consequence, the reward structure for scientists does not encourage openness and reproducibility. This can be changed by nudging incentives to align scientific practices with scientific values. Science will benefit by creating and connecting technologies that nudge incentives while supporting and improving the scientific workflow. For example, it should be as easy to search the research literature for my topic as it is to search the Internet to find hilarious videos of cats falling off of furniture. I will introduce the Center for Open Science (http://centerforopenscience.org/) and efforts to improve openness and reproducibility such as http://openscienceframework.org/. There will be no cats.

Cognitive dissonance in children: justification of effort or contrast?

PubMed

Alessandri, Jérôme; Darcheville, Jean-Claude; Zentall, Thomas R

2008-06-01

Justification of effort is a form of cognitive dissonance in which the subjective value of an outcome is directly related to the effort that went into obtaining it. However, it is likely that in social contexts (such as the requirements for joining a group) an inference can be made (perhaps incorrectly) that an outcome that requires greater effort to obtain in fact has greater value. Here we present evidence that a cognitive dissonance effect can be found in children under conditions that offer better control for the social value of the outcome. This effect is quite similar to contrast effects that recently have been studied in animals. We suggest that contrast between the effort required to obtain the outcome and the outcome itself provides a more parsimonious account of this phenomenon and perhaps other related cognitive dissonance phenomena as well. Research will be needed to identify cognitive dissonance processes that are different from contrast effects of this kind.

NASA OSMA NDE Program Additive Manufacturing Foundational Effort

NASA Technical Reports Server (NTRS)

Waller, Jess; Walker, James; Burke, Eric; Wells, Douglas

2016-01-01

NASA is providing key leadership in an international effort linking NASA and non-NASA resources to speed adoption of additive manufacturing (AM) to meet NASA's mission goals. Participants include industry, NASA's space partners, other government agencies, standards organizations and academia. Nondestructive Evaluation (NDE) is identified as a universal need for all aspects of additive manufacturing.

Beam Stability R&D for the APS MBA Upgrade

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sereno, Nicholas S.; Arnold, Ned D.; Bui, Hanh D.

2015-01-01

Beam diagnostics required for the APS Multi-bend acromat (MBA) are driven by ambitious beam stability requirements. The major AC stability challenge is to correct rms beam motion to 10% the rms beam size at the insertion device source points from0.01 to 1000 Hz. The vertical plane represents the biggest challenge forAC stability, which is required to be 400 nm rms for a 4-micron vertical beam size. In addition to AC stability, long-term drift over a period of seven days is required to be 1 micron or less. Major diagnostics R&D components include improved rf beam position processing using commercially availablemore » FPGA-based BPM processors, new X-ray beam position monitors based on hard X-ray fluorescence from copper and Compton scattering off diamond, mechanical motion sensing to detect and correct long-term vacuum chamber drift, a new feedback system featuring a tenfold increase in sampling rate, and a several-fold increase in the number of fast correctors and BPMs in the feedback algorithm. Feedback system development represents a major effort, and we are pursuing development of a novel algorithm that integrates orbit correction for both slow and fast correctors down to DC simultaneously. Finally, a new data acquisition system (DAQ) is being developed to simultaneously acquire streaming data from all diagnostics as well as the feedback processors for commissioning and fault diagnosis. Results of studies and the design effort are reported.« less

How do feelings influence effort? An empirical study of entrepreneurs' affect and venture effort.

PubMed

Foo, Maw-Der; Uy, Marilyn A; Baron, Robert A

2009-07-01

How do feelings influence the effort of entrepreneurs? To obtain data on this issue, the authors implemented experience sampling methodology in which 46 entrepreneurs used cell phones to provide reports on their affect, future temporal focus, and venture effort twice daily for 24 days. Drawing on the affect-as-information theory, the study found that entrepreneurs' negative affect directly predicts entrepreneurs' effort toward tasks that are required immediately. Results were consistent for within-day and next-day time lags. Extending the theory, the study found that positive affect predicts venture effort beyond what is immediately required and that this relationship is mediated by future temporal focus. The mediating effects were significant only for next-day outcomes. Implications of findings on the nature of the affect-effort relationship for different time lags are discussed.

Large datasets, logistics, sharing and workflow in screening.

PubMed

Cook, Tessa S

2018-03-29

Cancer screening initiatives exist around the world for different malignancies, most frequently breast, colorectal, and cervical cancer. A number of cancer registries exist to collect relevant data, but while these data may include imaging findings, they rarely, if ever, include actual images. Additionally, the data submitted to the registry are usually correlated with eventual cancer diagnoses and patient outcomes, rather than used with the individual's future screenings. Developing screening programs that allow for images to be submitted to a central location in addition to patient meta data and used for comparison to future screening exams would be very valuable in increasing access to care and ensuring that individuals are effectively screened at appropriate intervals. It would also change the way imaging results and additional patient data are correlated to eventual outcomes. However, it introduces logistical challenges surrounding secure storage and transmission of data to subsequent screening sites. In addition, in the absence of standardized protocols for screening, comparing current and prior imaging, especially from different equipment, can be challenging. Implementing a large-scale screening program with an image-enriched screening registry-effectively, an image-enriched electronic screening record-also requires that incentives exist for screening sites, physicians, and patients to participate; to maximize coverage, participation may have to be supported by government agencies. Workflows will also have to be adjusted to support registry participation for all screening patients in an effort to create a large, robust data set that can be used for future screening efforts as well as research initiatives.center.

Life sciences space station planning document: A reference payload for the exobiology research facilities

NASA Technical Reports Server (NTRS)

1987-01-01

The Cosmic Dust Collection and Gas Grain Simulation Facilities represent collaborative efforts between the Life Sciences and Solar System Exploration Divisions designed to strengthen a natural exobiology/Planetary Sciences connection. The Cosmic Dust Collection Facility is a Planetary Science facility, with Exobiology a primary user. Conversely, the Gas Grain Facility is an exobiology facility, with Planetary Science a primary user. Requirements for the construction and operation of the two facilities, contained herein, were developed through joint workshops between the two disciplines, as were representative experiments comprising the reference payloads. In the case of the Gas Grain Simulation Facility, the astrophysics Division is an additional potential user, having participated in the workshop to select experiments and define requirements.

Imaging hadron calorimetry for future Lepton Colliders

NASA Astrophysics Data System (ADS)

Repond, José

2013-12-01

To fully exploit the physics potential of a future Lepton Collider requires detectors with unprecedented jet energy and dijet-mass resolution. To meet these challenges, detectors optimized for the application of Particle Flow Algorithms (PFAs) are being designed and developed. The application of PFAs, in turn, requires calorimeters with very fine segmentation of the readout, so-called imaging calorimeters. This talk reviews progress in imaging hadron calorimetry as it is being developed for implementation in a detector at a future Lepton Collider. Recent results from the large prototypes built by the CALICE Collaboration, such as the Scintillator Analog Hadron Calorimeter (AHCAL) and the Digital Hadron Calorimeters (DHCAL and SDHCAL) are being presented. In addition, various R&D efforts beyond the present prototypes are being discussed.

Software Development and Test Methodology for a Distributed Ground System

NASA Technical Reports Server (NTRS)

Ritter, George; Guillebeau, Pat; McNair, Ann R. (Technical Monitor)

2002-01-01

The Marshall Space Flight Center's (MSFC) Payload Operations Center (POC) ground system has evolved over a period of about 10 years. During this time the software processes have migrated from more traditional to more contemporary development processes in an effort to minimize unnecessary overhead while maximizing process benefits. The Software processes that have evolved still emphasize requirements capture, software configuration management, design documenting, and making sure the products that have been developed are accountable to initial requirements. This paper will give an overview of how the Software Processes have evolved, highlighting the positives as well as the negatives. In addition, we will mention the COTS tools that have been integrated into the processes and how the COTS have provided value to the project.

Investigations Into Tank Venting for Propellant Resupply

NASA Technical Reports Server (NTRS)

Hearn, H. C.; Harrison, Robert A. (Technical Monitor)

2002-01-01

Models and simulations have been developed and applied to the evaluation of propellant tank ullage venting, which is integral to one approach for propellant resupply. The analytical effort was instrumental in identifying issues associated with resupply objectives, and it was used to help develop an operational procedure to accomplish the desired propellant transfer for a particular storable bipropellant system. Work on the project was not completed, and several topics have been identified as requiring further study; these include the potential for liquid entrainment during the low-g and thermal/freezing effects in the vent line and orifice. Verification of the feasibility of this propellant venting and resupply approach still requires additional analyses as well as testing to investigate the fluid and thermodynamic phenomena involved.

The pharmaceutical death-ride of dihydroartemisinin

PubMed Central

2010-01-01

In the 2010 second edition of WHO's guidelines for the treatment of malaria, the relatively new fixed dose combination dihydroartemisinin-piperaquine is included as one of the recommended artemisinin combination therapies. However, experimental testing demonstrates that, due to its intrinsic chemical instability, dihydroartemisinin is not suitable to be used in pharmaceutical formulations. In addition, data show that the currently available dihydroartemisinin preparations fail to meet the internationally accepted stability requirements. At a time when many efforts aim to ban counterfeit and substandard drugs from the malaria market, the obvious question rises how WHO and public-private partnerships, such as Medicine for Malaria venture (MMV), can support the production and marketing of anti-malarial drugs that do not even meet the International Pharmacopoeia requirements? PMID:20649950

Child Effortful Control, Teacher-student Relationships, and Achievement in Academically At-risk Children: Additive and Interactive Effects

PubMed Central

Liew, Jeffrey; Chen, Qi; Hughes, Jan N.

2009-01-01

The joint contributions of child effortful control (using inhibitory control and task accuracy as behavioral indices) and positive teacher-student relationships at first grade on reading and mathematics achievement at second grade were examined in 761 children who were predominantly from low-income and ethnic minority backgrounds and assessed to be academically at-risk at entry to first grade. Analyses accounted for clustering effects, covariates, baselines of effortful control measures, and prior levels of achievement. Even with such conservative statistical controls, interactive effects were found for task accuracy and positive teacher-student relationships on future achievement. Results suggest that task accuracy served as a protective factor so that children with high task accuracy performed well academically despite not having positive teacher-student relationships. Further, positive teacher-student relationships served as a compensatory factor so that children with low task accuracy performed just as well as those with high task accuracy if they were paired with a positive and supportive teacher. Importantly, results indicate that the influence of positive teacher-student relationships on future achievement was most pronounced for students with low effortful control on tasks that require fine motor skills, accuracy, and attention-related skills. Study results have implications for narrowing achievement disparities for academically at-risk children. PMID:20161421

Inequity responses of monkeys modified by effort

PubMed Central

van Wolkenten, Megan; Brosnan, Sarah F.; de Waal, Frans B. M.

2007-01-01

Without joint benefits, joint actions could never have evolved. Cooperative animals need to monitor closely how large a share they receive relative to their investment toward collective goals. This work documents the sensitivity to reward division in brown, or tufted, capuchin monkeys (Cebus apella). In addition to confirming previous results with a larger subject pool, this work rules out several alternative explanations and adds data on effort sensitivity. Thirteen adult monkeys exchanged tokens for rewards, showing negative reactions to receiving a less-favored reward than their partner. Because their negative reaction could not be attributed to the mere visibility of better rewards (greed hypothesis) nor to having received such rewards in the immediate past (frustration hypothesis), it must have been caused by seeing their partner obtain the better reward. Effort had a major effect in that by far the lowest level of performance in the entire study occurred in subjects required to expend a large effort while at the same time seeing their partner receive a better reward. It is unclear whether this effort–effect was based on comparisons with the partner, but it added significantly to the intensity of the inequity response. These effects are as expected if the inequity response evolved in the context of cooperative survival strategies. PMID:18000045

Child Effortful Control, Teacher-student Relationships, and Achievement in Academically At-risk Children: Additive and Interactive Effects.

PubMed

Liew, Jeffrey; Chen, Qi; Hughes, Jan N

2010-01-01

The joint contributions of child effortful control (using inhibitory control and task accuracy as behavioral indices) and positive teacher-student relationships at first grade on reading and mathematics achievement at second grade were examined in 761 children who were predominantly from low-income and ethnic minority backgrounds and assessed to be academically at-risk at entry to first grade. Analyses accounted for clustering effects, covariates, baselines of effortful control measures, and prior levels of achievement. Even with such conservative statistical controls, interactive effects were found for task accuracy and positive teacher-student relationships on future achievement. Results suggest that task accuracy served as a protective factor so that children with high task accuracy performed well academically despite not having positive teacher-student relationships. Further, positive teacher-student relationships served as a compensatory factor so that children with low task accuracy performed just as well as those with high task accuracy if they were paired with a positive and supportive teacher. Importantly, results indicate that the influence of positive teacher-student relationships on future achievement was most pronounced for students with low effortful control on tasks that require fine motor skills, accuracy, and attention-related skills. Study results have implications for narrowing achievement disparities for academically at-risk children.

Topographic data requirements for EOS global change research

USGS Publications Warehouse

Gesch, Dean B.

1994-01-01

This document is a result of Earth Observing System Data and Information System (EOSDIS) Version 0 activities of the Land Processes Distributed Active Archive Center at the U.S. Geological Survey's EROS Data Center. A relatively small part of the Version 0 funding provided by NASA is used to address topographic data issues related to EOS. These issues include identifying and improving access to existing sources of topographic data, data generation, facilitating the use of topographic data in global change research by demonstrating derivative products, and inventorying the specific topographic data requirements of EOS investigators. There is a clear need for global topographic data in EOSDIS. Only 10 percent of the global land surface is covered by high-resolution data that are available to the global change science community. Alternative sources for new data exist or have been proposed; however, none of them alone can fulfill the data requirements by the launch of the first EOS platform in 4 years. There is no operational provider of all the source data that are required. Even if appropriate global source data existed, a concerted production effort would be necessary to ensure the existence of the requisite topographic data before EOS launch. Additionally, no funding from NASA or any other agency has been appropriated for a new mapping mission or for other means of data acquisition. This effort to document requirements is an initial step toward understanding the severity of the data shortage. It is well beyond the scope of Version 0 funding and capabilities to provide the required data in the proper timeframe. The shortage of data and the lack of a plan for providing the necessary topographic data through EOSDIS in time for launch are issues that must be addressed by the EOS program.

American College of Surgeons remains committed to patient safety.

PubMed

Russell, Thomas R; Jones, R Scott

2006-11-01

Since 1913 the American College of Surgeons has addressed patient safety as a top priority, so they are pleased to contribute this article offering the College's perspective on this critical subject. More specifically, this piece reviews the College's perennial efforts to ensure surgeons and hospitals access to scientifically verifiable standards, availability of effective quality improvement tools, and a better understanding of errors in care. Additionally, they examine the cultural changes required within surgery and provide an overview of the College's recent initiatives in research, accreditation, and education.

Additional Clarification of Guidance for Implementation of the 1-hour NO2 NAAQS Under PSD

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

The Growing Need for Diverse Blood Donors.

PubMed

MacIntyre, Linda M

2017-07-01

: Research shows that phenotype matching can improve the outcomes of people who receive repeated transfusions. In addition, the demographics of the United States are shifting, and more ethnically and racially diverse donors are needed. These factors have health implications and require ongoing efforts to ensure a safe and adequate U.S. blood supply. Nurses can help to develop and implement strategies to increase the number and diversity of blood donors, ensuring donations better match the needs of transfusion recipients daily and in the event of a public health emergency.

Challenges & Roadmap for Beyond CMOS Computing Simulation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rodrigues, Arun F.; Frank, Michael P.

Simulating HPC systems is a difficult task and the emergence of “Beyond CMOS” architectures and execution models will increase that difficulty. This document presents a “tutorial” on some of the simulation challenges faced by conventional and non-conventional architectures (Section 1) and goals and requirements for simulating Beyond CMOS systems (Section 2). These provide background for proposed short- and long-term roadmaps for simulation efforts at Sandia (Sections 3 and 4). Additionally, a brief explanation of a proof-of-concept integration of a Beyond CMOS architectural simulator is presented (Section 2.3).

Recent Progress in Advanced Materials for Lithium Ion Batteries

PubMed Central

Chen, Jiajun

2013-01-01

The development and commercialization of lithium ion batteries is rooted in material discovery. Promising new materials with high energy density are required for achieving the goal toward alternative forms of transportation. Over the past decade, significant progress and effort has been made in developing the new generation of Li-ion battery materials. In the review, I will focus on the recent advance of tin- and silicon-based anode materials. Additionally, new polyoxyanion cathodes, such as phosphates and silicates as cathode materials, will also be discussed. PMID:28809300

Questions Posed by Connecticut DEP Regarding the Moving and Addition of Operating Facilities by Web Technologies

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Testing and Oxygen Assessment Results for a Next Generation Extravehicular Activity Portable Life Support System Fan

NASA Technical Reports Server (NTRS)

Paul, Heather L.; Jennings, Mallory A.; Rivera, Fatonia L.; Martin, Devin

2011-01-01

NASA is designing a next generation Extravehicular Activity (EVA) Portable Life Support System (PLSS) for use in future surface exploration endeavors. To meet the new requirements for ventilation flow at nominal and buddy modes, a fan has been developed and tested. This paper summarizes the results of the performance and life cycle testing efforts conducted at the NASA Johnson Space Center. Additionally, oxygen compatibility assessment results from an evaluation conducted at White Sands Test Facility (WSTF) are provided, and lessons learned and future recommendations are outlined.

Using a cloud to replenish parched groundwater modeling efforts.

PubMed

Hunt, Randall J; Luchette, Joseph; Schreuder, Willem A; Rumbaugh, James O; Doherty, John; Tonkin, Matthew J; Rumbaugh, Douglas B

2010-01-01

Groundwater models can be improved by introduction of additional parameter flexibility and simultaneous use of soft-knowledge. However, these sophisticated approaches have high computational requirements. Cloud computing provides unprecedented access to computing power via the Internet to facilitate the use of these techniques. A modeler can create, launch, and terminate "virtual" computers as needed, paying by the hour, and save machine images for future use. Such cost-effective and flexible computing power empowers groundwater modelers to routinely perform model calibration and uncertainty analysis in ways not previously possible.

Design evolution of the orbiter reaction control subsystem

NASA Technical Reports Server (NTRS)

Taeber, R. J.; Karakulko, W.; Belvins, D.; Hohmann, C.; Henderson, J.

1985-01-01

The challenges of space shuttle orbiter reaction control subsystem development began with selection of the propellant for the subsystem. Various concepts were evaluated before the current Earth storable, bipropellant combination was selected. Once that task was accomplished, additional challenges of designing the system to satisfy the wide range of requirements dictated by operating environments, reusability, and long life were met. Verification of system adequacy was achieved by means of a combination of analysis and test. The studies, the design efforts, and the test and analysis techniques employed in meeting the challenges are described.

James Webb Space Telescope (JWST): The First Light Machine

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2008-01-01

The James Webb Space Telescope (JWST), expected to launch in 2011, will study the origin and evolution of luminous objects, galaxies, stars, planetary systems and the origins of life. It is optimized for near infrared wavelength operation of 0.6-28 micrometers and will have a 5 year mission life (with a 10 year goal). This presentation reviews JWST's science objectives, the JWST telescope and mirror requirements and how they support the JWST architecture. Additionally, an overview of the JWST primary mirror technology development effort is highlighted.

Cybersecurity in Artificial Pancreas Experiments

PubMed Central

O'Keeffe, Derek T.; Maraka, Spyridoula; Basu, Ananda; Keith-Hynes, Patrick

2015-01-01

Abstract Medical devices have transformed modern health care, and ongoing experimental medical technology trials (such as the artificial pancreas) have the potential to significantly improve the treatment of several chronic conditions, including diabetes mellitus. However, we suggest that, to date, the essential concept of cybersecurity has not been adequately addressed in this field. This article discusses several key issues of cybersecurity in medical devices and proposes some solutions. In addition, it outlines the current requirements and efforts of regulatory agencies to increase awareness of this topic and to improve cybersecurity. PMID:25923544

Using a cloud to replenish parched groundwater modeling efforts

USGS Publications Warehouse

Hunt, Randall J.; Luchette, Joseph; Schreuder, Willem A.; Rumbaugh, James O.; Doherty, John; Tonkin, Matthew J.; Rumbaugh, Douglas B.

2010-01-01

Groundwater models can be improved by introduction of additional parameter flexibility and simultaneous use of soft-knowledge. However, these sophisticated approaches have high computational requirements. Cloud computing provides unprecedented access to computing power via the Internet to facilitate the use of these techniques. A modeler can create, launch, and terminate “virtual” computers as needed, paying by the hour, and save machine images for future use. Such cost-effective and flexible computing power empowers groundwater modelers to routinely perform model calibration and uncertainty analysis in ways not previously possible.

Experiment Needs and Facilities Study Appendix A Transient Reactor Test Facility (TREAT) Upgrade

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The TREAT Upgrade effort is designed to provide significant new capabilities to satisfy experiment requirements associated with key LMFBR Safety Issues. The upgrade consists of reactor-core modifications to supply the physics performance needed for the new experiments, an Advanced TREAT loop with size and thermal-hydraulics capabilities needed for the experiments, associated interface equipment for loop operations and handling, and facility modifications necessary to accommodate operations with the Loop. The costs and schedules of the tasks to be accomplished under the TREAT Upgrade project are summarized. Cost, including contingency, is about 10 million dollars (1976 dollars). A schedule for execution ofmore » 36 months has been established to provide the new capabilities in order to provide timely support of the LMFBR national effort. A key requirement for the facility modifications is that the reactor availability will not be interrupted for more than 12 weeks during the upgrade. The Advanced TREAT loop is the prototype for the STF small-bundle package loop. Modified TREAT fuel elements contain segments of graphite-matrix fuel with graded uranium loadings similar to those of STF. In addition, the TREAT upgrade provides for use of STF-like stainless steel-UO{sub 2} TREAT fuel for tests of fully enriched fuel bundles. This report will introduce the Upgrade study by presenting a brief description of the scope, performance capability, safety considerations, cost schedule, and development requirements. This work is followed by a "Design Description". Because greatly upgraded loop performance is central to the upgrade, a description is given of Advanced TREAT loop requirements prior to description of the loop concept. Performance requirements of the upgraded reactor system are given. An extensive discussion of the reactor physics calculations performed for the Upgrade concept study is provided. Adequate physics performance is essential for performance of experiments with the Advanced TREAT loop, and the stress placed on these calculations reflects this. Additional material on performance and safety is provided. Backup calculations on calculations of plutonium-release limits are described. Cost and schedule information for the Upgrade are presented.« less

Additive Manufacturing Modeling and Simulation A Literature Review for Electron Beam Free Form Fabrication

NASA Technical Reports Server (NTRS)

Seufzer, William J.

2014-01-01

Additive manufacturing is coming into industrial use and has several desirable attributes. Control of the deposition remains a complex challenge, and so this literature review was initiated to capture current modeling efforts in the field of additive manufacturing. This paper summarizes about 10 years of modeling and simulation related to both welding and additive manufacturing. The goals were to learn who is doing what in modeling and simulation, to summarize various approaches taken to create models, and to identify research gaps. Later sections in the report summarize implications for closed-loop-control of the process, implications for local research efforts, and implications for local modeling efforts.

Efforts to integrate CMIP metadata and standards into NOAA-GFDL's climate model workflow

NASA Astrophysics Data System (ADS)

Blanton, C.; Lee, M.; Mason, E. E.; Radhakrishnan, A.

2017-12-01

Modeling centers participating in CMIP6 run model simulations, publish requested model output (conforming to community data standards), and document models and simulations using ES-DOC. GFDL developed workflow software implementing some best practices to meet these metadata and documentation requirements. The CMIP6 Data Request defines the variables that should be archived for each experiment and specifies their spatial and temporal structure. We used the Data Request's dreqPy python library to write GFDL model configuration files as an alternative to hand-crafted tables. There was also a largely successful effort to standardize variable names within the model to reduce the additional overhead of translating "GFDL to CMOR" variables at a later stage in the pipeline. The ES-DOC ecosystem provides tools and standards to create, publish, and view various types of community-defined CIM documents, most notably model and simulation documents. Although ES-DOC will automatically create simulation documents during publishing by harvesting NetCDF global attributes, the information must be collected, stored, and placed in the NetCDF files by the workflow. We propose to develop a GUI to collect the simulation document precursors. In addition, a new MIP for CMIP6-CPMIP, a comparison of computational performance of climate models-is documented using machine and performance CIM documents. We used ES-DOC's pyesdoc python library to automatically create these machine and performance documents. We hope that these and similar efforts will become permanent features of the GFDL workflow to facilitate future participation in CMIP-like activities.

Issues in the Pharmacokinetics of Trichloroethylene and Its Metabolites

PubMed Central

Chiu, Weihsueh A.; Okino, Miles S.; Lipscomb, John C.; Evans, Marina V.

2006-01-01

Much progress has been made in understanding the complex pharmacokinetics of trichloroethylene (TCE). Qualitatively, it is clear that TCE is metabolized to multiple metabolites either locally or into systemic circulation. Many of these metabolites are thought to have toxicologic importance. In addition, efforts to develop physiologically based pharmacokinetic (PBPK) models have led to a better quantitative assessment of the dosimetry of TCE and several of its metabolites. As part of a mini-monograph on key issues in the health risk assessment of TCE, this article is a review of a number of the current scientific issues in TCE pharmacokinetics and recent PBPK modeling efforts with a focus on literature published since 2000. Particular attention is paid to factors affecting PBPK modeling for application to risk assessment. Recent TCE PBPK modeling efforts, coupled with methodologic advances in characterizing uncertainty and variability, suggest that rigorous application of PBPK modeling to TCE risk assessment appears feasible at least for TCE and its major oxidative metabolites trichloroacetic acid and trichloroethanol. However, a number of basic structural hypotheses such as enterohepatic recirculation, plasma binding, and flow- or diffusion-limited treatment of tissue distribution require additional evaluation and analysis. Moreover, there are a number of metabolites of potential toxicologic interest, such as chloral, dichloroacetic acid, and those derived from glutathione conjugation, for which reliable pharmacokinetic data is sparse because of analytical difficulties or low concentrations in systemic circulation. It will be a challenge to develop reliable dosimetry for such cases. PMID:16966104

Generic extravehicular (EVA) and telerobot task primitives for analysis, design, and integration. Version 1.0: Reference compilation for the EVA and telerobotics communities

NASA Technical Reports Server (NTRS)

Smith, Jeffrey H.; Drews, Michael

1990-01-01

The results are described of an effort to establish commonality and standardization of generic crew extravehicular (crew-EVA) and telerobotic task analysis primitives used for the study of spaceborne operations. Although direct crew-EVA plans are the most visible output of spaceborne operations, significant ongoing efforts by a wide variety of projects and organizations also require tools for estimation of crew-EVA and telerobotic times. Task analysis tools provide estimates for input to technical and cost tradeoff studies. A workshop was convened to identify the issues and needs to establish a common language and syntax for task analysis primitives. In addition, the importance of such a syntax was shown to have precedence over the level to which such a syntax is applied. The syntax, lists of crew-EVA and telerobotic primitives, and the data base in diskette form are presented.

Theoretical research program to study chemical reactions in AOTV bow shock tubes

NASA Technical Reports Server (NTRS)

Taylor, Peter

1992-01-01

Effort continued through this period to refine and expand the SIRIUS/ABACUS program package for CASSCF and RASSCF second derivatives. A new approach to computing the Gaussian integral derivatives that require much of the time in gradient and Hessian calculations was devised. Several different studies were undertaken in the area of application calculations. These include a study of proton transfer in the HF trimer, which provides an analog of rearrangement reactions, and the extension of our previous work on Be and Mg clusters to Ca clusters. In addition, a very accurate investigation of the lowest-lying potential curves of the O2 molecule was completed. These curves are essential for evaluating different models of the terrestrial atmosphere nightglow. The most effort this year was devoted to a large scale investigation of stationary points on the C4H4 surface, and the thermochemistry of acetylene/acetylene reaction.

Ethical Dilemmas in Disaster Medicine

PubMed Central

Ozge Karadag, C; Kerim Hakan, A

2012-01-01

Background Disasters may lead to ethical challenges that are different from usual medical practices. In addition, disaster situations are related with public health ethics more than medical ethics, and accordingly may require stronger effort to achieve a balance between individual and collective rights. This paper aims to review some ethical dilemmas that arise in disasters and mainly focuses on health services. Disasters vary considerably with respect to their time, place and extent; therefore, ethical questions may not always have `one-size-fits-all` answers. On the other hand, embedding ethical values and principles in every aspect of health-care is of vital importance. Reviewing legal and organizational regulations, developing health-care related guidelines, and disaster recovery plans, establishing on-call ethics committees as well as adequate in-service training of health-care workers for ethical competence are among the most critical steps. It is only by making efforts before disasters, that ethical challenges can be minimized in disaster responses. PMID:23285411

Fusing modeling techniques to support domain analysis for reuse opportunities identification

NASA Technical Reports Server (NTRS)

Hall, Susan Main; Mcguire, Eileen

1993-01-01

Functional modeling techniques or object-oriented graphical representations, which are more useful to someone trying to understand the general design or high level requirements of a system? For a recent domain analysis effort, the answer was a fusion of popular modeling techniques of both types. By using both functional and object-oriented techniques, the analysts involved were able to lean on their experience in function oriented software development, while taking advantage of the descriptive power available in object oriented models. In addition, a base of familiar modeling methods permitted the group of mostly new domain analysts to learn the details of the domain analysis process while producing a quality product. This paper describes the background of this project and then provides a high level definition of domain analysis. The majority of this paper focuses on the modeling method developed and utilized during this analysis effort.

Paying for the Medicare program.

PubMed

Munnell, A H

1985-01-01

Although the hospital insurance (HI) trust fund acted as a source of strength for the old-age, survivors, and disability insurance program during its recent financial crises, projections by HCFA and CBO reveal that the Medicare program will experience financing problems of its own within the next decade. No one would argue that Medicare's financing problems should be solved simply by raising more money. However, the prospect of insolvency in the HI trust fund and the increasing strain on general revenues from the Supplementary Medical Insurance trust fund require policymakers to survey the options for increasing Medicare revenues while cost-control devices are being developed. Indeed, even if cost-control efforts are completely successful, additional revenues may be needed in the future to finance new initiatives in the Medicare program. Therefore, this paper will look briefly at current efforts to regain control of soaring hospital and physician costs and then examine some of the more feasible options for increasing Medicare revenues.

Teaching Introductory Astronomy "Open and Out" & Looking Forward to the 2017 Solar Eclipse

NASA Astrophysics Data System (ADS)

Chu, I.-Wen Mike; Cronkhite, Jeff

2016-01-01

We present a new effort on teaching introductory astronomy addressing the specific challenges facing small colleges including limited resources, changing generational behavior and new technological trends. The approach adopts open source solutions into the developmental learning materials aiming for standardization and wide-scale applicability. In addition we utilize events and resources outside classroom into the learning. Among examples of the development are laboratory exercises based on the planetarium software Stellarium and remediation exercises using Khan Academy instructional videos. As the eventual goal is to move toward greater autonomy the cycles of improvement necessarily require student feedback in an entirely different instructional style based on egalitarian dialogues. We highlight a laboratory exercise on Earth-Moon distance estimation using parallax of the upcoming 2017 solar eclipse to illustrate the "open and out" philosophy. Achievements, limitations and some diagnostics of the current effort are also presented.

Design, fabrication and test of a trace contaminant control system

NASA Technical Reports Server (NTRS)

1975-01-01

A trace contaminant control system was designed, fabricated, and evaluated to determine suitability of the system concept to future manned spacecraft. Two different models were considered. The load model initially required by the contract was based on the Space Station Prototype (SSP) general specifications SVSK HS4655, reflecting a change from a 9 man crew to a 6 man crew of the model developed in previous phases of this effort. Trade studies and a system preliminary design were accomplished based on this contaminant load, including computer analyses to define the optimum system configuration in terms of component arrangements, flow rates and component sizing. At the completion of the preliminary design effort a revised contaminant load model was developed for the SSP. Additional analyses were then conducted to define the impact of this new contaminant load model on the system configuration. A full scale foam-core mock-up with the appropriate SSP system interfaces was also fabricated.

An inter- laboratory proficiency testing exercise for rabies diagnosis in Latin America and the Caribbean

PubMed Central

Clavijo, Alfonso; Freire de Carvalho, Mary H.; Orciari, Lillian A.; Velasco-Villa, Andres; Ellison, James A.; Greenberg, Lauren; Yager, Pamela A.; Green, Douglas B.; Vigilato, Marco A.; Cosivi, Ottorino; Del Rio-Vilas, Victor J.

2017-01-01

The direct fluorescent antibody test (DFA), is performed in all rabies reference laboratories across Latin America and the Caribbean (LAC). Despite DFA being a critical capacity in the control of rabies, there is not a standardized protocol in the region. We describe the results of the first inter-laboratory proficiency exercise of national rabies laboratories in LAC countries as part of the regional efforts towards dog-maintained rabies elimination in the American region. Twenty three laboratories affiliated to the Ministries of Health and Ministries of Agriculture participated in this exercise. In addition, the laboratories completed an online questionnaire to assess laboratory practices. Answers to the online questionnaire indicated large variability in the laboratories throughput, equipment used, protocols availability, quality control standards and biosafety requirements. Our results will inform actions to improve and harmonize laboratory rabies capacities across LAC in support for the regional efforts towards elimination of dog-maintained rabies. PMID:28369139

Troubleshooting Costs

NASA Astrophysics Data System (ADS)

Kornacki, Jeffrey L.

Seventy-six million cases of foodborne disease occur each year in the United States alone. Medical and lost productivity costs of the most common pathogens are estimated to be 5.6-9.4 billion. Product recalls, whether from foodborne illness or spoilage, result in added costs to manufacturers in a variety of ways. These may include expenses associated with lawsuits from real or allegedly stricken individuals and lawsuits from shorted customers. Other costs include those associated with efforts involved in finding the source of the contamination and eliminating it and include time when lines are shut down and therefore non-productive, additional non-routine testing, consultant fees, time and personnel required to overhaul the entire food safety system, lost market share to competitors, and the cost associated with redesign of the factory and redesign or acquisition of more hygienic equipment. The cost associated with an effective quality assurance plan is well worth the effort to prevent the situations described.

Pulse Detonation Engines for High Speed Flight

NASA Technical Reports Server (NTRS)

Povinelli, Louis A.

2002-01-01

Revolutionary concepts in propulsion are required in order to achieve high-speed cruise capability in the atmosphere and for low cost reliable systems for earth to orbit missions. One of the advanced concepts under study is the air-breathing pulse detonation engine. Additional work remains in order to establish the role and performance of a PDE in flight applications, either as a stand-alone device or as part of a combined cycle system. In this paper, we shall offer a few remarks on some of these remaining issues, i.e., combined cycle systems, nozzles and exhaust systems and thrust per unit frontal area limitations. Currently, an intensive experimental and numerical effort is underway in order to quantify the propulsion performance characteristics of this device. In this paper, we shall highlight our recent efforts to elucidate the propulsion potential of pulse detonation engines and their possible application to high-speed or hypersonic systems.

A strategy to improve priority setting in developing countries.

PubMed

Kapiriri, Lydia; Martin, Douglas K

2007-09-01

Because the demand for health services outstrips the available resources, priority setting is one of the most difficult issues faced by health policy makers, particularly those in developing countries. Priority setting in developing countries is fraught with uncertainty due to lack of credible information, weak priority setting institutions, and unclear priority setting processes. Efforts to improve priority setting in these contexts have focused on providing information and tools. In this paper we argue that priority setting is a value laden and political process, and although important, the available information and tools are not sufficient to address the priority setting challenges in developing countries. Additional complementary efforts are required. Hence, a strategy to improve priority setting in developing countries should also include: (i) capturing current priority setting practices, (ii) improving the legitimacy and capacity of institutions that set priorities, and (iii) developing fair priority setting processes.

Group-Based Active Learning of Classification Models.

PubMed

Luo, Zhipeng; Hauskrecht, Milos

2017-05-01

Learning of classification models from real-world data often requires additional human expert effort to annotate the data. However, this process can be rather costly and finding ways of reducing the human annotation effort is critical for this task. The objective of this paper is to develop and study new ways of providing human feedback for efficient learning of classification models by labeling groups of examples. Briefly, unlike traditional active learning methods that seek feedback on individual examples, we develop a new group-based active learning framework that solicits label information on groups of multiple examples. In order to describe groups in a user-friendly way, conjunctive patterns are used to compactly represent groups. Our empirical study on 12 UCI data sets demonstrates the advantages and superiority of our approach over both classic instance-based active learning work, as well as existing group-based active-learning methods.

Environmental considerations for 3D seismic in Louisianna wetlands

DOE Office of Scientific and Technical Information (OSTI.GOV)

Browning, G.; Dillane, T.; Baaren, P. van

1996-11-01

Louisiana swamps have been host to seismic crews for many years. Results from recent 3D surveys indicate that well planned and executed seismic operations have a minimal and short term impact in these environmentally sensitive wetlands. Pre-planning identifies challenges that require use of improved technology and work procedures. These include multi-channel radio telemetry recording systems, ramming of dynamite and hydrophones as opposed to drilling, DGPS positioning and coordinated use of Airboats, buggies and helicopters. In addition to minimal environmental impact, increased data quality, reduced cost and shorter project duration have been achieved as a result of these efforts. Unlike 2Dmore » surveys, where profile positioning is flexible, 3D surveys involve high density coverage over many square miles operated by numerous personnel. Survey design includes minimizing repeated traffic and crossing points. Survey operations require environmental participation and commitment from every person involved in the project. This includes a thorough orientation and training program with strong emphasis on environmental sensitivity and awareness. Close co-ordination between regulatory agencies, clients and the contractor is a key factor in all aspects of the survey planning and operation. Benefits from these efforts are significant, measurable and continue to improve.« less

Socially Aware Heterogeneous Wireless Networks

PubMed Central

Kosmides, Pavlos; Adamopoulou, Evgenia; Demestichas, Konstantinos; Theologou, Michael; Anagnostou, Miltiades; Rouskas, Angelos

2015-01-01

The development of smart cities has been the epicentre of many researchers’ efforts during the past decade. One of the key requirements for smart city networks is mobility and this is the reason stable, reliable and high-quality wireless communications are needed in order to connect people and devices. Most research efforts so far, have used different kinds of wireless and sensor networks, making interoperability rather difficult to accomplish in smart cities. One common solution proposed in the recent literature is the use of software defined networks (SDNs), in order to enhance interoperability among the various heterogeneous wireless networks. In addition, SDNs can take advantage of the data retrieved from available sensors and use them as part of the intelligent decision making process contacted during the resource allocation procedure. In this paper, we propose an architecture combining heterogeneous wireless networks with social networks using SDNs. Specifically, we exploit the information retrieved from location based social networks regarding users’ locations and we attempt to predict areas that will be crowded by using specially-designed machine learning techniques. By recognizing possible crowded areas, we can provide mobile operators with recommendations about areas requiring datacell activation or deactivation. PMID:26110402

Space Biosensor Systems: Implications for Technology Transfer

NASA Technical Reports Server (NTRS)

Hines, J. W.; Somps, C. J.; Madou, M.; Imprescia, Clifford C. (Technical Monitor)

1997-01-01

To meet the need for continuous, automated monitoring of animal subjects, including; humans, during space flight, NASA is developing advanced physiologic sensor and biotelemetry system technologies. The ability to continuously track basic physiological parameters, such as heart rate, blood pH, and body temperature, in untethered subjects in space is a challenging task. At NASA's Ames Research Center, where a key focus is gravitational biology research, engineers have teamed with life scientists to develop wireless sensor systems for automated physiologic monitoring of animal models as small as the rat. This technology is also being adapted, in collaboration with medical professionals, to meet human clinical monitoring needs both in space and on the ground. Thus, these advanced monitoring technologies have important dual-use functions; they meet space flight data collection requirements and constraints, while concurrently addressing a number of monitoring and data acquisition challenges on the ground in areas of clinical monitoring and biomedical research. Additional applications for these and related technologies are being sought and additional partnerships established that enhance development efforts, reduce costs and facilitate technology infusion between the public and private sectors. This paper describes technology transfer and co-development projects that have evolved out of NASA's miniaturized, implantable chemical sensor development efforts.

Δ9-Tetrahydrocannabinol decreases willingness to exert cognitive effort in male rats.

PubMed

Silveira, Mason M; Adams, Wendy K; Morena, Maria; Hill, Matthew N; Winstanley, Catharine A

2017-03-01

Acceptance of cannabis use is growing. However, prolonged use is associated with diminished psychosocial outcomes, potentially mediated by drug-induced cognitive impairments. Δ 9 -Tetrahydrocannabinol (THC) is the main psychoactive ingredient in cannabis, yet other phytocannabinoids in the plant, such as cannabidiol (CBD), have unique properties. Given that CBD can modulate the undesirable effects of THC, therapeutic agents, such as nabiximols, contain higher CBD:THC ratios than illicit marijuana. We tested the hypothesis that THC impairs a relevant cognitive function for long-term success, namely willingness to exert cognitive effort for greater rewards, and that CBD could attenuate such decision-making impairments. Male Long-Evans rats ( n = 29) performing the rat cognitive effort task (rCET) received acute THC and CBD, independently and concurrently, in addition to other cannabinoids. Rats chose between 2 options differing in reward magnitude, but also in the cognitive effort (attentional load) required to obtain them. We found that THC decreased choice of hard trials without impairing the animals' ability to accurately complete them. Strikingly, this impairment was correlated with CB1 receptor density in the medial prefrontal cortex - an area previously implicated in effortful decision-making. In contrast, CBD did not affect choice. Coadministration of 1:1 CBD:THC matching that in nabiximols modestly attenuated the deleterious effects of THC in "slacker" rats. Only male rats were investigated, and the THC/CBD coadministration experiment was carried out in a subset of individuals. These findings confirm that THC, but not CBD, selectively impairs decision-making involving cognitive effort costs. However, coadministration of CBD only partially ameliorates such THC-induced dysfunction.

Error-associated behaviors and error rates for robotic geology

NASA Technical Reports Server (NTRS)

Anderson, Robert C.; Thomas, Geb; Wagner, Jacob; Glasgow, Justin

2004-01-01

This study explores human error as a function of the decision-making process. One of many models for human decision-making is Rasmussen's decision ladder [9]. The decision ladder identifies the multiple tasks and states of knowledge involved in decision-making. The tasks and states of knowledge can be classified by the level of cognitive effort required to make the decision, leading to the skill, rule, and knowledge taxonomy (Rasmussen, 1987). Skill based decisions require the least cognitive effort and knowledge based decisions require the greatest cognitive effort. Errors can occur at any of the cognitive levels.

Effort, performance, and motivation: insights from robot-assisted training of human golf putting and rat grip strength.

PubMed

Duarte, Jaime E; Gebrekristos, Berkenesh; Perez, Sergi; Rowe, Justin B; Sharp, Kelli; Reinkensmeyer, David J

2013-06-01

Robotic devices can modulate success rates and required effort levels during motor training, but it is unclear how this affects performance gains and motivation. Here we present results from training unimpaired humans in a virtual golf-putting task, and training spinal cord injured (SCI) rats in a grip strength task using robotically modulated success rates and effort levels. Robotic assistance in golf practice increased trainees feelings of competence, and, paradoxically, increased their sense effort, even though it had mixed effects on learning. Reducing effort during a grip strength training task led rats with SCI to practice the task more frequently. However, the more frequent practice of these rats did not cause them to exceed the strength gains achieved by rats that exercised less often at higher required effort levels. These results show that increasing success and decreasing effort with robots increases motivation, but has mixed effects on performance gains.

Entomological Monitoring and Evaluation: Diverse Transmission Settings of ICEMR Projects Will Require Local and Regional Malaria Elimination Strategies

PubMed Central

Conn, Jan E.; Norris, Douglas E.; Donnelly, Martin J.; Beebe, Nigel W.; Burkot, Thomas R.; Coulibaly, Mamadou B.; Chery, Laura; Eapen, Alex; Keven, John B.; Kilama, Maxwell; Kumar, Ashwani; Lindsay, Steve W.; Moreno, Marta; Quinones, Martha; Reimer, Lisa J.; Russell, Tanya L.; Smith, David L.; Thomas, Matthew B.; Walker, Edward D.; Wilson, Mark L.; Yan, Guiyun

2015-01-01

The unprecedented global efforts for malaria elimination in the past decade have resulted in altered vectorial systems, vector behaviors, and bionomics. These changes combined with increasingly evident heterogeneities in malaria transmission require innovative vector control strategies in addition to the established practices of long-lasting insecticidal nets and indoor residual spraying. Integrated vector management will require focal and tailored vector control to achieve malaria elimination. This switch of emphasis from universal coverage to universal coverage plus additional interventions will be reliant on improved entomological monitoring and evaluation. In 2010, the National Institutes for Allergies and Infectious Diseases (NIAID) established a network of malaria research centers termed ICEMRs (International Centers for Excellence in Malaria Research) expressly to develop this evidence base in diverse malaria endemic settings. In this article, we contrast the differing ecology and transmission settings across the ICEMR study locations. In South America, Africa, and Asia, vector biologists are already dealing with many of the issues of pushing to elimination such as highly focal transmission, proportionate increase in the importance of outdoor and crepuscular biting, vector species complexity, and “sub patent” vector transmission. PMID:26259942

Entomological Monitoring and Evaluation: Diverse Transmission Settings of ICEMR Projects Will Require Local and Regional Malaria Elimination Strategies.

PubMed

Conn, Jan E; Norris, Douglas E; Donnelly, Martin J; Beebe, Nigel W; Burkot, Thomas R; Coulibaly, Mamadou B; Chery, Laura; Eapen, Alex; Keven, John B; Kilama, Maxwell; Kumar, Ashwani; Lindsay, Steve W; Moreno, Marta; Quinones, Martha; Reimer, Lisa J; Russell, Tanya L; Smith, David L; Thomas, Matthew B; Walker, Edward D; Wilson, Mark L; Yan, Guiyun

2015-09-01

The unprecedented global efforts for malaria elimination in the past decade have resulted in altered vectorial systems, vector behaviors, and bionomics. These changes combined with increasingly evident heterogeneities in malaria transmission require innovative vector control strategies in addition to the established practices of long-lasting insecticidal nets and indoor residual spraying. Integrated vector management will require focal and tailored vector control to achieve malaria elimination. This switch of emphasis from universal coverage to universal coverage plus additional interventions will be reliant on improved entomological monitoring and evaluation. In 2010, the National Institutes for Allergies and Infectious Diseases (NIAID) established a network of malaria research centers termed ICEMRs (International Centers for Excellence in Malaria Research) expressly to develop this evidence base in diverse malaria endemic settings. In this article, we contrast the differing ecology and transmission settings across the ICEMR study locations. In South America, Africa, and Asia, vector biologists are already dealing with many of the issues of pushing to elimination such as highly focal transmission, proportionate increase in the importance of outdoor and crepuscular biting, vector species complexity, and "sub patent" vector transmission. © The American Society of Tropical Medicine and Hygiene.

Biocidal Properties of Anti-Icing Additives for Aircraft Fuels

PubMed Central

Neihof, R. A.; Bailey, C. A.

1978-01-01

The biocidal and biostatic activities of seven glycol monoalkyl ether compounds were evaluated as part of an effort to find an improved anti-icing additive for jet aircraft fuel. Typical fuel contaminants, Cladosporium resinae, Gliomastix sp., Candida sp., Pseudomonas aeruginosa, and a mixed culture containing sulfate-reducing bacteria were used as assay organisms. Studies were carried out over 3 to 4 months in two-phase systems containing jet fuel and aqueous media. Diethylene glycol monomethyl ether, triethylene glycol monomethyl ether, triethylene glycol monoethyl ether, and 2-methoxyethanol were generally biocidal in aqueous concentrations of 10 to 17% for all organisms except Gliomastix, which required 25% or more. 2-Ethoxyethanol, 2-propoxyethanol, and 2-butoxyethanol were biocidal at progressively lower concentrations down to 1 to 2% for 2-butoxyethanol. The enhanced antimicrobial activity of these three compounds was attributed to cytoplasmic membrane damage because of the correlation between surface tension measurements and lytic activity with P. aeruginosa cells. The mechanism of action of the less active compounds appeared to be due to osmotic (dehydrating) effects. When all requirements are taken into account, diethylene glycol monomethyl ether appears to be the most promising replacement for the currently used additive, 2-methoxyethanol. PMID:646356

Development and Implementation of an Optimization Model for Hydropower and Total Dissolved Gas in the Mid-Columbia River System

DOE PAGES

Witt, Adam; Magee, Timothy; Stewart, Kevin; ...

2017-08-10

Managing energy, water, and environmental priorities and constraints within a cascade hydropower system is a challenging multiobjective optimization effort that requires advanced modeling and forecasting tools. Within the mid-Columbia River system, there is currently a lack of specific solutions for predicting how coordinated operational decisions can mitigate the impacts of total dissolved gas (TDG) supersaturation while satisfying multiple additional policy and hydropower generation objectives. In this study, a reduced-order TDG uptake equation is developed that predicts tailrace TDG at seven hydropower facilities on the mid-Columbia River. The equation is incorporated into a general multiobjective river, reservoir, and hydropower optimization toolmore » as a prioritized operating goal within a broader set of system-level objectives and constraints. A test case is presented to assess the response of TDG and hydropower generation when TDG supersaturation is optimized to remain under state water-quality standards. Satisfaction of TDG as an operating goal is highly dependent on whether constraints that limit TDG uptake are implemented at a higher priority than generation requests. According to the model, an opportunity exists to reduce TDG supersaturation and meet hydropower generation requirements by shifting spillway flows to different time periods. In conclusion, a coordinated effort between all project owners is required to implement systemwide optimized solutions that satisfy the operating policies of all stakeholders.« less

Development and Implementation of an Optimization Model for Hydropower and Total Dissolved Gas in the Mid-Columbia River System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Witt, Adam; Magee, Timothy; Stewart, Kevin

Managing energy, water, and environmental priorities and constraints within a cascade hydropower system is a challenging multiobjective optimization effort that requires advanced modeling and forecasting tools. Within the mid-Columbia River system, there is currently a lack of specific solutions for predicting how coordinated operational decisions can mitigate the impacts of total dissolved gas (TDG) supersaturation while satisfying multiple additional policy and hydropower generation objectives. In this study, a reduced-order TDG uptake equation is developed that predicts tailrace TDG at seven hydropower facilities on the mid-Columbia River. The equation is incorporated into a general multiobjective river, reservoir, and hydropower optimization toolmore » as a prioritized operating goal within a broader set of system-level objectives and constraints. A test case is presented to assess the response of TDG and hydropower generation when TDG supersaturation is optimized to remain under state water-quality standards. Satisfaction of TDG as an operating goal is highly dependent on whether constraints that limit TDG uptake are implemented at a higher priority than generation requests. According to the model, an opportunity exists to reduce TDG supersaturation and meet hydropower generation requirements by shifting spillway flows to different time periods. In conclusion, a coordinated effort between all project owners is required to implement systemwide optimized solutions that satisfy the operating policies of all stakeholders.« less

Proton Exchange Membrane (PEM) Fuel Cell Status and Remaining Challenges for Manned Space-Flight Applications

NASA Technical Reports Server (NTRS)

Reaves, Will F.; Hoberecht, Mark A.

2003-01-01

The Fuel Cell has been used for manned space flight since the Gemini program. Its power output and water production capability over long durations for the mass and volume are critical for manned space-flight requirements. The alkaline fuel cell used on the Shuttle, while very reliable and capable for it s application, has operational sensitivities, limited life, and an expensive recycle cost. The PEM fuel cell offers many potential improvements in those areas. NASA Glenn Research Center is currently leading a PEM fuel cell development and test program intended to move the technology closer to the point required for manned space-flight consideration. This paper will address the advantages of PEM fuel cell technology and its potential for future space flight as compared to existing alkaline fuel cells. It will also cover the technical hurdles that must be overcome. In addition, a description of the NASA PEM fuel cell development program will be presented, and the current status of this effort discussed. The effort is a combination of stack and ancillary component hardware development, culminating in breadboard and engineering model unit assembly and test. Finally, a detailed roadmap for proceeding fiom engineering model hardware to qualification and flight hardware will be proposed. Innovative test engineering and potential payload manifesting may be required to actually validate/certify a PEM fuel cell for manned space flight.

Self-regulated learning and academic performance in medical education.

PubMed

Lucieer, Susanna M; Jonker, Laura; Visscher, Chris; Rikers, Remy M J P; Themmen, Axel P N

2016-06-01

Medical schools aim to graduate medical doctors who are able to self-regulate their learning. It is therefore important to investigate whether medical students' self-regulated learning skills change during medical school. In addition, since these skills are expected to be helpful to learn more effectively, it is of interest to investigate whether these skills are related to academic performance. In a cross-sectional design, the Self-Regulation of Learning Self-Report Scale (SRL-SRS) was used to investigate the change in students' self-regulated learning skills. First and third-year students (N = 949, 81.7%) SRL-SRS scores were compared with ANOVA. The relation with academic performance was investigated with multinomial regression analysis. Only one of the six skills, reflection, significantly, but positively, changed during medical school. In addition, a small, but positive relation of monitoring, reflection, and effort with first-year GPA was found, while only effort was related to third-year GPA. The change in self-regulated learning skills is minor as only the level of reflection differs between the first and third year. In addition, the relation between self-regulated learning skills and academic performance is limited. Medical schools are therefore encouraged to re-examine the curriculum and methods they use to enhance their students' self-regulated learning skills. Future research is required to understand the limited impact on performance.

Noise Control in Space Shuttle Orbiter

NASA Technical Reports Server (NTRS)

Goodman, Jerry R.

2009-01-01

Acoustic limits in habitable space enclosures are required to ensure crew safety, comfort, and habitability. Noise control is implemented to ensure compliance with the acoustic requirements. The purpose of this paper is to describe problems with establishing acoustic requirements and noise control efforts, and present examples of noise control treatments and design applications used in the Space Shuttle Orbiter. Included is the need to implement the design discipline of acoustics early in the design process, and noise control throughout a program to ensure that limits are met. The use of dedicated personnel to provide expertise and oversight of acoustic requirements and noise control implementation has shown to be of value in the Space Shuttle Orbiter program. It is concluded that to achieve acceptable and safe noise levels in the crew habitable space, early resolution of acoustic requirements and implementation of effective noise control efforts are needed. Management support of established acoustic requirements and noise control efforts is essential.

Extracellular space preservation aids the connectomic analysis of neural circuits.

PubMed

Pallotto, Marta; Watkins, Paul V; Fubara, Boma; Singer, Joshua H; Briggman, Kevin L

2015-12-09

Dense connectomic mapping of neuronal circuits is limited by the time and effort required to analyze 3D electron microscopy (EM) datasets. Algorithms designed to automate image segmentation suffer from substantial error rates and require significant manual error correction. Any improvement in segmentation error rates would therefore directly reduce the time required to analyze 3D EM data. We explored preserving extracellular space (ECS) during chemical tissue fixation to improve the ability to segment neurites and to identify synaptic contacts. ECS preserved tissue is easier to segment using machine learning algorithms, leading to significantly reduced error rates. In addition, we observed that electrical synapses are readily identified in ECS preserved tissue. Finally, we determined that antibodies penetrate deep into ECS preserved tissue with only minimal permeabilization, thereby enabling correlated light microscopy (LM) and EM studies. We conclude that preservation of ECS benefits multiple aspects of the connectomic analysis of neural circuits.

Gas turbine engines and transmissions for bus demonstration programs. Technical status report, 31 July 1979--31 October 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigro, D.N.

1979-11-01

The report summarizes the DDA activities for the effort performed on the procurement and delivery of eleven Allison GT 404-4 gas turbine engines and five HT740CT and six V730CT Allison automatic transmissions and the required associated software. The contract requires the delivery of the engines and transmissions for the Greyhound and Transit Coaches, respectively. In addition, software items such as cost reports, technical reports, installation drawings, acceptance test data and parts lists are required. A recent decision by the DOE will modify the build configuration for the last four (4) Transit Coach engines. It was decided by the DOE atmore » a meeting in Washington, DC on March 28, 1979 with representatives from DDA, NASA/LeRC, JPL and Booz-Allen and Hamilton that these engines are to be built with ceramic regenerators. (TFD)« less

Major design issues of molten carbonate fuel cell power generation unit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, T.P.

1996-04-01

In addition to the stack, a fuel cell power generation unit requires fuel desulfurization and reforming, fuel and oxidant preheating, process heat removal, waste heat recovery, steam generation, oxidant supply, power conditioning, water supply and treatment, purge gas supply, instrument air supply, and system control. These support facilities add considerable cost and system complexity. Bechtel, as a system integrator of M-C Power`s molten carbonate fuel cell development team, has spent substantial effort to simplify and minimize these supporting facilities to meet cost and reliability goals for commercialization. Similiar to other fuels cells, MCFC faces design challenge of how to complymore » with codes and standards, achieve high efficiency and part load performance, and meanwhile minimize utility requirements, weight, plot area, and cost. However, MCFC has several unique design issues due to its high operating temperature, use of molten electrolyte, and the requirement of CO2 recycle.« less

Advanced nickel-hydrogen cell configuration study

NASA Technical Reports Server (NTRS)

1983-01-01

Long-term trends in the evolution of space power technology point toward increased payload power demand which in turn translates into both higher battery system charge storage capability and higher operating voltages. State of the art nickel-hydrogen cells of the 50 to 60 Wh size, packaged in individual pressure vessels, are capable of meeting the required cycle life for a wide range of anticipated operating conditions; however, they provided several drawbacks to battery system integrated efforts. Because of size, high voltage/high power systems require integrating hundreds of cells into the operating system. Packaging related weight and volume inefficiencies degrade the energy density and specific energy of individual cells currently at 30 Wh/cudm and 40 Wh/kg respectively. In addition, the increased parts count and associated handling significantly affect the overall battery related costs. Spacecraft battery systems designers within industry and Government realize that to reduce weight, volume, and cost requires increases in the capacity of nickel-hydrogen cells.

Environmental requirements for flat plate photovoltaic modules for terrestrial applications

NASA Technical Reports Server (NTRS)

Hoffman, A. R.; Ross, R. G., Jr.

1979-01-01

The environmental test requirements that have been developed for flat plate modules purchased through Department of Energy funding are described. Concurrent with the selection of the initial qualification tests from space program experience - temperature cycling and humidity - surveys of existing photovoltaic systems in the field revealed that arrays were experiencing the following failure modes: interconnect breakage, delamination, and electrical termination corrosion. These coupled with application-dependent considerations led to the development of additional qualification tests, such as cyclic pressure loading, warped mounting surface, and hail. Rationale for the selection of tests, their levels and durations is described. Comparisons between field-observed degradation and test-induced degradation show a positive correlation with some of the observed field effects. Also, the tests are proving useful for detecting design, process, and workmanship deficiencies. The status of study efforts for the development of environmental requirements for field-related problems is reviewed.

Growing a medical practice with social media marketing.

PubMed

Laban, Jake

2012-01-01

Many medical practices are facing the lack of practice growth that their social media efforts are generating. This article provides concrete ideas that can be put in place by any medical practice to realize sustainable practice growth through social media marketing. In the article, the author demonstrates that social media marketing of the medical practice has become absolutely essential in today's evolving, competitive, and fast-paced environment. This demonstration is made through an exploration of the evolution of what "good" marketing has looked like for medical practices over time. In addition, attention is paid to the shift in the definition of good marketing that is required for the practice that is preparing a social media-marketing plan. Specifically, the article investigates the proven requirements for a balanced blend of unique and engaging promotional and nonpromotional community outreach, which is required on a daily basis to achieve the significant, lasting, and sustainable growth that the practice wishes to achieve.

Performance and Life Tests of a Regenerative Blower for EVA Suit Ventilation

NASA Technical Reports Server (NTRS)

Izenson, Mike; Chen, Weibo; Paul, Heather L.; Jennings, Mallory A.

2011-01-01

Ventilation fans for future space suits must meet demanding performance specifications, satisfy stringent safety requirements for operation in an oxygen atmosphere, and be able to increase output to operate in buddy mode. A regenerative blower is an attractive choice due to its ability to meet these requirements at low operating speed. This paper describes progress in the development and testing of a regenerative blower designed to meet requirements for ventilation subsystems in a future space suit Portable Life Support Systems (PLSS). The blower assembly includes a custom-designed motor that has significantly improved in efficiency during this development effort. The blower was tested at both nominal and buddy mode operating points and head/flow performance and power consumption were measured. The blower was operated for over 1000 hours to demonstrate safe operation in an oxygen test loop at prototypical pressures. In addition, the blower demonstrated operation with the introduction of simulated lunar dust.

Characterization of Metal Powders Used for Additive Manufacturing

PubMed Central

Slotwinski, JA; Garboczi, EJ; Stutzman, PE; Ferraris, CF; Watson, SS; Peltz, MA

2014-01-01

Additive manufacturing (AM) techniques1 can produce complex, high-value metal parts, with potential applications as critical parts, such as those found in aerospace components. The production of AM parts with consistent and predictable properties requires input materials (e.g., metal powders) with known and repeatable characteristics, which in turn requires standardized measurement methods for powder properties. First, based on our previous work, we assess the applicability of current standardized methods for powder characterization for metal AM powders. Then we present the results of systematic studies carried out on two different powder materials used for additive manufacturing: stainless steel and cobalt-chrome. The characterization of these powders is important in NIST efforts to develop appropriate measurements and standards for additive materials and to document the property of powders used in a NIST-led additive manufacturing material round robin. An extensive array of characterization techniques was applied to these two powders, in both virgin and recycled states. The physical techniques included laser diffraction particle size analysis, X-ray computed tomography for size and shape analysis, and optical and scanning electron microscopy. Techniques sensitive to structure and chemistry, including X-ray diffraction, energy dispersive analytical X-ray analysis using the X-rays generated during scanning electron microscopy, and X-Ray photoelectron spectroscopy were also employed. The results of these analyses show how virgin powder changes after being exposed to and recycled from one or more Direct Metal Laser Sintering (DMLS) additive manufacturing build cycles. In addition, these findings can give insight into the actual additive manufacturing process. PMID:26601040

Perspectives on a Policy That Never Was: Trying To Enhance Multiculturalism in a University Setting.

ERIC Educational Resources Information Center

Greenwald, Beatrice

This paper discusses the failure of the University of Washington to formulate a policy regarding the establishment of a Cultural and Ethnic Diversity (CED) course requirement for undergraduates despite nine years of efforts to do so, tracing the efforts to establish a CED requirement, along with the arguments for and against such a requirement. It…

Special Education: State and Local-Imposed Requirements Complicate Federal Efforts to Reduce Administrative Burden. Report to Congressional Requesters. GAO-16-25

ERIC Educational Resources Information Center

US Government Accountability Office, 2016

2016-01-01

When the Individuals with Disabilities Education Act (IDEA) was reauthorized in 2004, it included provisions to reduce administrative and paperwork requirements to address concerns about burden. The Government Accountability Office (GAO) was asked to review federal efforts to reduce burden related to meeting IDEA requirements for educating…

ELECTROFISHING EFFORT REQUIREMENTS FOR ASSESSING SPECIES RICHNESS AND BIOTIC INTEGRITY IN WESTERN OREGON STREAMS

EPA Science Inventory

We empirically examined the sampling effort required to adequately represent species richness and proportionate abundance when backpack electrofishing western Oregon streams. When sampling, we separately recorded data for each habitat unit. In data analyses, we repositioned each...

Clinical test responses to different orthoptic exercise regimes in typical young adults

PubMed Central

Horwood, Anna; Toor, Sonia

2014-01-01

Purpose The relative efficiency of different eye exercise regimes is unclear, and in particular the influences of practice, placebo and the amount of effort required are rarely considered. This study measured conventional clinical measures following different regimes in typical young adults. Methods A total of 156 asymptomatic young adults were directed to carry out eye exercises three times daily for 2 weeks. Exercises were directed at improving blur responses (accommodation), disparity responses (convergence), both in a naturalistic relationship, convergence in excess of accommodation, accommodation in excess of convergence, and a placebo regime. They were compared to two control groups, neither of which were given exercises, but the second of which were asked to make maximum effort during the second testing. Results Instruction set and participant effort were more effective than many exercises. Convergence exercises independent of accommodation were the most effective treatment, followed by accommodation exercises, and both regimes resulted in changes in both vergence and accommodation test responses. Exercises targeting convergence and accommodation working together were less effective than those where they were separated. Accommodation measures were prone to large instruction/effort effects and monocular accommodation facility was subject to large practice effects. Conclusions Separating convergence and accommodation exercises seemed more effective than exercising both systems concurrently and suggests that stimulation of accommodation and convergence may act in an additive fashion to aid responses. Instruction/effort effects are large and should be carefully controlled if claims for the efficacy of any exercise regime are to be made. PMID:24471739

Joint contact forces can be reduced by improving joint moment symmetry in below-knee amputee gait simulations.

PubMed

Koelewijn, Anne D; van den Bogert, Antonie J

2016-09-01

Despite having a fully functional knee and hip in both legs, asymmetries in joint moments of the knee and hip are often seen in gait of persons with a unilateral transtibial amputation (TTA), possibly resulting in excessive joint loading. We hypothesize that persons with a TTA can walk with more symmetric joint moments at the cost of increased effort or abnormal kinematics. The hypothesis was tested using predictive simulations of gait. Open loop controls of one gait cycle were found by solving an optimization problem that minimizes a combination of walking effort and tracking error in joint angles, ground reaction force and gait cycle duration. A second objective was added to penalize joint moment asymmetry, creating a multi-objective optimization problem. A Pareto front was constructed by changing the weights of the objectives and three solutions were analyzed to study the effect of increasing joint moment symmetry. When the optimization placed more weight on moment symmetry, walking effort increased and kinematics became less normal, confirming the hypothesis. TTA gait improved with a moderate increase in joint moment symmetry. At a small cost of effort and abnormal kinematics, the peak hip extension moment in the intact leg was decreased significantly, and so was the joint contact force in the knee and hip. Additional symmetry required a significant increase in walking effort and the joint contact forces in both hips became significantly higher than in able-bodied gait. Copyright © 2016 Elsevier B.V. All rights reserved.

A streamlined failure mode and effects analysis.

PubMed

Ford, Eric C; Smith, Koren; Terezakis, Stephanie; Croog, Victoria; Gollamudi, Smitha; Gage, Irene; Keck, Jordie; DeWeese, Theodore; Sibley, Greg

2014-06-01

Explore the feasibility and impact of a streamlined failure mode and effects analysis (FMEA) using a structured process that is designed to minimize staff effort. FMEA for the external beam process was conducted at an affiliate radiation oncology center that treats approximately 60 patients per day. A structured FMEA process was developed which included clearly defined roles and goals for each phase. A core group of seven people was identified and a facilitator was chosen to lead the effort. Failure modes were identified and scored according to the FMEA formalism. A risk priority number,RPN, was calculated and used to rank failure modes. Failure modes with RPN > 150 received safety improvement interventions. Staff effort was carefully tracked throughout the project. Fifty-two failure modes were identified, 22 collected during meetings, and 30 from take-home worksheets. The four top-ranked failure modes were: delay in film check, missing pacemaker protocol/consent, critical structures not contoured, and pregnant patient simulated without the team's knowledge of the pregnancy. These four failure modes had RPN > 150 and received safety interventions. The FMEA was completed in one month in four 1-h meetings. A total of 55 staff hours were required and, additionally, 20 h by the facilitator. Streamlined FMEA provides a means of accomplishing a relatively large-scale analysis with modest effort. One potential value of FMEA is that it potentially provides a means of measuring the impact of quality improvement efforts through a reduction in risk scores. Future study of this possibility is needed.

Final Inventory Work-Off Plan for ORNL transuranic wastes (1986 version)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickerson, L.S.

1988-05-01

The Final Inventory Work-Off Plan (IWOP) for ORNL Transuranic Wastes addresses ORNL's strategy for retrieval, certification, and shipment of its stored and newly generated contact-handled (CH) and remote-handled (RH) transuranic (TRU) wastes to the Waste Isolation Pilot Plant (WIPP), the proposed geologic repository near Carlsbad, New Mexico. This document considers certification compliance with the WIPP waste acceptance criteria (WAC) and is consistent with the US Department of Energy's Long-Range Master Plan for Defense Transuranic Waste Management. This document characterizes Oak Ridge National Laboratory's (ORNL's) TRU waste by type and estimates the number of shipments required to dispose of it; describesmore » the methods, facilities, and systems required for its certification and shipment; presents work-off strategies and schedules for retrieval, certification, and transportation; discusses the resource needs and additions that will be required for the effort and forecasts costs for the long-term TRU waste management program; and lists public documentation required to support certification facilities and strategies. 22 refs., 6 figs., 10 tabs.« less

Experience with The Use of Warm Mix Asphalt Additives in Bitumen Binders

NASA Astrophysics Data System (ADS)

Cápayová, Silvia; Unčík, Stanislav; Cihlářová, Denisa

2018-03-01

In most European countries, Hot Mix Asphalt (HMA) technology is still being used as the standard for the production and processing of bituminous mixtures. However, from the perspective of environmental acceptability, global warming and greenhouse gas production, Slovakia is making an effort to put into practice modern technology, which is characterized by lower energy consumption and reducing negative impacts on the environment. Warm mix asphalt technologies (WMA), which have been verified at the Department of Transportation Engineering laboratory, Faculty of Civil Engineering, Slovak University of Technology (FCE, SUT) can provide the required mixture properties and can be used not only for the construction of new roads, but also for their renovation and reconstruction. The paper was created in cooperation with the Technical University of Ostrava, Czech Republic, which also deals with the addition of additives to asphalt mixtures and binders. It describes a comparison of the impact of some organic and chemical additives on the properties of commonly used bitumen binders in accordance with valid standards and technical regulations.

[Role of Institutional Review Boards for multi-centre studies in national health services research - a cross-sectional study of the effort to obtain secondary ethical approvals for the DACAPO study].

PubMed

Blecha, Sebastian; Thomann-Hackner, Kathrin; Brandstetter, Susanne; Dodoo-Schittko, Frank; Seboek, Philipp; Apfelbacher, Christian; Graf, Bernhard M; Bein, Thomas

2015-09-01

Health services research (HSR) is of fundamental importance for the continuous improvement of preventive, diagnostic or therapeutic measures. The conduct of multi-centre HSR studies requires that ethical approval by Institutional review boards (IRB's) is obtained. We documented the effort, the complexity and the man power necessary to obtain secondary ethical approval for a national HSR in Germany ("Surviving the Acute Respiratory Distress Syndrome" [DACAPO-study]). Having obtained a primary ethical approval by the IRB of Regensburg University, the time, correspondence, necessity for amendments, corrections, or additional costs by 34 IRB's for 64 participating study centers was documented. The complete obtainment was found to be time consuming and associated with a high workload and man power. A time span of seven month was needed to receive votes from all IRB's. The median time span was 25,5 days (25 %/75 % percentile 13 and 42 days, respectively). Requirements in terms of corrections or amendments were inhomogeneous and frequent changes were necessary. There were additional fees for secondary votes of 4328,40 €. Total costs for the study center Regensburg were 21.193,40 € (2,6 % of the grant volume). Obtaining all ethical approvals for a multi-centre observational HSR study in Germany is complex and time consuming. Various and inhomogeneous formalities may delay the plan and realization of HSR. A Homogenization and simplification of the procedure of ethics votes should be discussed. © Georg Thieme Verlag KG Stuttgart · New York.

Telemetry Monitoring and Display Using LabVIEW

NASA Technical Reports Server (NTRS)

Wells, George; Baroth, Edmund C.

1993-01-01

The Measurement Technology Center of the Instrumentation Section configures automated data acquisition systems to meet the diverse needs of JPL's experimental research community. These systems are based on personal computers or workstations (Apple, IBM/Compatible, Hewlett-Packard, and Sun Microsystems) and often include integrated data analysis, visualization and experiment control functions in addition to data acquisition capabilities. These integrated systems may include sensors, signal conditioning, data acquisition interface cards, software, and a user interface. Graphical programming is used to simplify configuration of such systems. Employment of a graphical programming language is the most important factor in enabling the implementation of data acquisition, analysis, display and visualization systems at low cost. Other important factors are the use of commercial software packages and off-the-shelf data acquisition hardware where possible. Understanding the experimenter's needs is also critical. An interactive approach to user interface construction and training of operators is also important. One application was created as a result of a competative effort between a graphical programming language team and a text-based C language programming team to verify the advantages of using a graphical programming language approach. With approximately eight weeks of funding over a period of three months, the text-based programming team accomplished about 10% of the basic requirements, while the Macintosh/LabVIEW team accomplished about 150%, having gone beyond the original requirements to simulate a telemetry stream and provide utility programs. This application verified that using graphical programming can significantly reduce software development time. As a result of this initial effort, additional follow-on work was awarded to the graphical programming team.

An extended supersonic combustion model for the dynamic analysis of hypersonic vehicles

NASA Technical Reports Server (NTRS)

Bossard, J. A.; Peck, R. E.; Schmidt, D. K.

1993-01-01

The development of an advanced dynamic model for aeroelastic hypersonic vehicles powered by air breathing engines requires an adequate engine model. This report provides a discussion of some of the more important features of supersonic combustion and their relevance to the analysis and design of supersonic ramjet engines. Of particular interest are those aspects of combustion that impact the control of the process. Furthermore, the report summarizes efforts to enhance the aeropropulsive/aeroelastic dynamic model developed at the Aerospace Research Center of Arizona State University by focusing on combustion and improved modeling of this flow. The expanded supersonic combustor model described here has the capability to model the effects of friction, area change, and mass addition, in addition to the heat addition process. A comparison is made of the results from four cases: (1) heat addition only; (2) heat addition plus friction; (3) heat addition, friction, and area reduction, and (4) heat addition, friction, area reduction, and mass addition. The relative impact of these effects on the Mach number, static temperature, and static pressure distributions within the combustor are then shown. Finally, the effects of frozen versus equilibrium flow conditions within the exhaust plume is discussed.

[Effects of nurses' perception of servant leadership on leader effectiveness, satisfaction and additional effort: focused on the mediating effects of leader trust and value congruence].

PubMed

Han, Sang Sook; Kim, Nam Eun

2012-02-01

This study was done to examine the effects of nurses' perception of servant leadership on leader effectiveness, satisfaction and promoting additional effort. The focus was the mediating effects of leader trust and value congruence. Data were collected from 361 RN-BSN students and nurses participating in nationally attended in-service training programs. Data were analyzed using descriptive statistics and structural analysis with SPSS 17.0 windows program and Amos 7.0. Direct effects of nurses' perception of servant leadership were negative, but mediating effects of trust and value congruency were positively correlated with leader effectiveness, satisfaction and additional effort, that is servant leadership should be effective through mediating factors. The study results indicate that if the middle managers of nurses can build leader trust and value congruency between nurses through servant leadership, leader effectiveness, satisfaction and additional effort on the part of the nurses could result in a positive change in the long term.

Qualification of Daiichi Units 1, 2, and 3 Data for Severe Accident Evaluations - Process and Illustrative Examples from Prior TMI-2 Evaluations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rempe, Joy Lynn; Knudson, Darrell Lee

2014-09-01

The accidents at the Three Mile Island Unit 2 (TMI-2) Pressurized Water Reactor (PWR) and the Daiichi Units 1, 2, and 3 Boiling Water Reactors (BWRs) provide unique opportunities to evaluate instrumentation exposed to severe accident conditions. Conditions associated with the release of coolant and the hydrogen burn that occurred during the TMI-2 accident exposed instrumentation to harsh conditions, including direct radiation, radioactive contamination, and high humidity with elevated temperatures and pressures. As part of a program initiated in 2012 by the Department of Energy Office of Nuclear Energy (DOE-NE), a review was completed to gain insights from prior TMI-2more » sensor survivability and data qualification efforts. This initial review focused on the set of sensors deemed most important by post-TMI-2 instrumentation evaluation programs. Instrumentation evaluation programs focused on data required by TMI-2 operators to assess the condition of the reactor and containment and the effect of mitigating actions taken by these operators. In addition, prior efforts focused on sensors providing data required for subsequent forensic evaluations and accident simulations. To encourage the potential for similar activities to be completed for qualifying data from Daiichi Units 1, 2, and 3, this report provides additional details related to the formal process used to develop a qualified TMI-2 data base and presents data qualification details for three parameters: primary system pressure; containment building temperature; and containment pressure. As described within this report, sensor evaluations and data qualification required implementation of various processes, including comparisons with data from other sensors, analytical calculations, laboratory testing, and comparisons with sensors subjected to similar conditions in large-scale integral tests and with sensors that were similar in design to instruments easily removed from the TMI-2 plant for evaluations. As documented in this report, results from qualifying data for these parameters led to key insights related to TMI-2 accident progression. Hence, these selected examples illustrate the types of activities completed in the TMI-2 data qualification process and the importance of such a qualification effort. These details are documented in this report to facilitate implementation of similar process using data and examinations at the Daiichi Units 1, 2, and 3 reactors so that BWR-specific benefits can be obtained.« less

A new look at the simultaneous analysis and design of structures

NASA Technical Reports Server (NTRS)

Striz, Alfred G.

1994-01-01

The minimum weight optimization of structural systems, subject to strength and displacement constraints as well as size side constraints, was investigated by the Simultaneous ANalysis and Design (SAND) approach. As an optimizer, the code NPSOL was used which is based on a sequential quadratic programming (SQP) algorithm. The structures were modeled by the finite element method. The finite element related input to NPSOL was automatically generated from the input decks of such standard FEM/optimization codes as NASTRAN or ASTROS, with the stiffness matrices, at present, extracted from the FEM code ANALYZE. In order to avoid ill-conditioned matrices that can be encountered when the global stiffness equations are used as additional nonlinear equality constraints in the SAND approach (with the displacements as additional variables), the matrix displacement method was applied. In this approach, the element stiffness equations are used as constraints instead of the global stiffness equations, in conjunction with the nodal force equilibrium equations. This approach adds the element forces as variables to the system. Since, for complex structures and the associated large and very sparce matrices, the execution times of the optimization code became excessive due to the large number of required constraint gradient evaluations, the Kreisselmeier-Steinhauser function approach was used to decrease the computational effort by reducing the nonlinear equality constraint system to essentially a single combined constraint equation. As the linear equality and inequality constraints require much less computational effort to evaluate, they were kept in their previous form to limit the complexity of the KS function evaluation. To date, the standard three-bar, ten-bar, and 72-bar trusses have been tested. For the standard SAND approach, correct results were obtained for all three trusses although convergence became slower for the 72-bar truss. When the matrix displacement method was used, correct results were still obtained, but the execution times became excessive due to the large number of constraint gradient evaluations required. Using the KS function, the computational effort dropped, but the optimization seemed to become less robust. The investigation of this phenomenon is continuing. As an alternate approach, the code MINOS for the optimization of sparse matrices can be applied to the problem in lieu of the Kreisselmeier-Steinhauser function. This investigation is underway.

The pharmacology of effort-related choice behavior: Dopamine, depression, and individual differences.

PubMed

Salamone, John D; Correa, Merce; Yohn, Samantha; Lopez Cruz, Laura; San Miguel, Noemi; Alatorre, Luisa

2016-06-01

This review paper is focused upon the involvement of mesolimbic dopamine (DA) and related brain systems in effort-based processes. Interference with DA transmission affects instrumental behavior in a manner that interacts with the response requirements of the task, such that rats with impaired DA transmission show a heightened sensitivity to ratio requirements. Impaired DA transmission also affects effort-related choice behavior, which is assessed by tasks that offer a choice between a preferred reinforcer that has a high work requirement vs. less preferred reinforcer that can be obtained with minimal effort. Rats and mice with impaired DA transmission reallocate instrumental behavior away from food-reinforced tasks with high response costs, and show increased selection of low reinforcement/low cost options. Tests of effort-related choice have been developed into models of pathological symptoms of motivation that are seen in disorders such as depression and schizophrenia. These models are being employed to explore the effects of conditions associated with various psychopathologies, and to assess drugs for their potential utility as treatments for effort-related symptoms. Studies of the pharmacology of effort-based choice may contribute to the development of treatments for symptoms such as psychomotor slowing, fatigue or anergia, which are seen in depression and other disorders. Copyright © 2016 Elsevier B.V. All rights reserved.

Electrofishing Effort Required to Estimate Biotic Condition in Southern Idaho Rivers

EPA Science Inventory

An important issue surrounding biomonitoring in large rivers is the minimum sampling effort required to collect an adequate number of fish for accurate and precise determinations of biotic condition. During the summer of 2002, we sampled 15 randomly selected large-river sites in...

33 CFR 214.9 - Requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... SUPPLIES OF DRINKING WATER § 214.9 Requirements. Providing emergency supplies of clean drinking water... met. (b) The extent of state and local efforts to provide clean drinking water and their capability to do so. Corps efforts to provide temporary supplies of drinking water must be limited to measures...

33 CFR 214.9 - Requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... SUPPLIES OF DRINKING WATER § 214.9 Requirements. Providing emergency supplies of clean drinking water... met. (b) The extent of state and local efforts to provide clean drinking water and their capability to do so. Corps efforts to provide temporary supplies of drinking water must be limited to measures...

33 CFR 214.9 - Requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... SUPPLIES OF DRINKING WATER § 214.9 Requirements. Providing emergency supplies of clean drinking water... met. (b) The extent of state and local efforts to provide clean drinking water and their capability to do so. Corps efforts to provide temporary supplies of drinking water must be limited to measures...

33 CFR 214.9 - Requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... SUPPLIES OF DRINKING WATER § 214.9 Requirements. Providing emergency supplies of clean drinking water... met. (b) The extent of state and local efforts to provide clean drinking water and their capability to do so. Corps efforts to provide temporary supplies of drinking water must be limited to measures...

Ergonomic assessment of airport shuttle driver tasks using an ergonomic analysis toolset.

PubMed

Çakıt, Erman

2018-06-01

This study aimed to (a) evaluate strength requirements and lower back stresses during lifting and baggage handling tasks with the 3D Static Strength Prediction Program (3DSSPP) and (b) provide additional analyses using rapid entire body assessment (REBA) and the NASA task load index (TLX) to assess the risks associated with the tasks. Four healthy female shuttle drivers of good health aged between 55 and 60 years were observed and interviewed in an effort to determine the tasks required of their occupations. The results indicated that lifting bags and placing them in a shuttle were high risk for injury and possible changes should be further investigated. The study concluded there was a potential for injury associated with baggage storing and retrieval tasks of a shuttle driver.

A Generic Software Architecture For Prognostics

NASA Technical Reports Server (NTRS)

Teubert, Christopher; Daigle, Matthew J.; Sankararaman, Shankar; Goebel, Kai; Watkins, Jason

2017-01-01

Prognostics is a systems engineering discipline focused on predicting end-of-life of components and systems. As a relatively new and emerging technology, there are few fielded implementations of prognostics, due in part to practitioners perceiving a large hurdle in developing the models, algorithms, architecture, and integration pieces. As a result, no open software frameworks for applying prognostics currently exist. This paper introduces the Generic Software Architecture for Prognostics (GSAP), an open-source, cross-platform, object-oriented software framework and support library for creating prognostics applications. GSAP was designed to make prognostics more accessible and enable faster adoption and implementation by industry, by reducing the effort and investment required to develop, test, and deploy prognostics. This paper describes the requirements, design, and testing of GSAP. Additionally, a detailed case study involving battery prognostics demonstrates its use.

Discriminative stimuli that follow a delay have added value for pigeons.

PubMed

DiGian, Kelly A; Friedrich, Andrea M; Zentall, Thomas R

2004-10-01

Clement, Feltus, Kaiser, and Zentall (2000) reported that pigeons prefer discriminative stimuli that require greater effort (more pecks) to obtain over those that require less effort. In the present experiment, we examined two variables associated with this phenomenon. First, we asked whether delay of reinforcement, presumably a relatively aversive event similar to effort, would produce similar effects. Second, we asked whether the stimulus preference produced by a prior relatively aversive event depends on its anticipation. Anticipation of delay was accomplished by signaling its occurrence. Results indicated that delays can produce preferences similar to those produced by increased effort, but only if the delays are signaled.

HNSciCloud - Overview and technical Challenges

NASA Astrophysics Data System (ADS)

Gasthuber, Martin; Meinhard, Helge; Jones, Robert

2017-10-01

HEP is only one of many sciences with sharply increasing compute requirements that cannot be met by profiting from Moore’s law alone. Commercial clouds potentially allow for realising larger economies of scale. While some small-scale experience requiring dedicated effort has been collected, public cloud resources have not been integrated yet with the standard workflows of science organisations in their private data centres; in addition, European science has not ramped up to significant scale yet. The HELIX NEBULA Science Cloud project - HNSciCloud, partly funded by the European Commission, addresses these points. Ten organisations under CERN’s leadership, covering particle physics, bioinformatics, photon science and other sciences, have joined to procure public cloud resources as well as dedicated development efforts towards this integration. The HNSciCloud project faces the challenge to accelerate developments performed by the selected commercial providers. In order to guarantee cost efficient usage of IaaS resources across a wide range of scientific communities, the technical requirements had to be carefully constructed. With respect to current IaaS offerings, dataintensive science is the biggest challenge; other points that need to be addressed concern identity federations, network connectivity and how to match business practices of large IaaS providers with those of public research organisations. In the first section, this paper will give an overview of the project and explain the findings so far. The last section will explain the key points of the technical requirements and present first results of the experience of the procurers with the services in comparison to their’on-premise’ infrastructure.

Innovative postmarket device evaluation using a quality registry to monitor thoracic endovascular aortic repair in the treatment of aortic dissection.

PubMed

Beck, Adam W; Lombardi, Joseph V; Abel, Dorothy B; Morales, J Pablo; Marinac-Dabic, Danica; Wang, Grace; Azizzadeh, Ali; Kern, John; Fillinger, Mark; White, Rodney; Cronenwett, Jack L; Cambria, Richard P

2017-05-01

United States Food and Drug Administration (FDA)-mandated postapproval studies have long been a mainstay of the continued evaluation of high-risk medical devices after initial marketing approval; however, these studies often present challenges related to patient/physician recruitment and retention. Retrospective single-center studies also do not fully represent the spectrum of real-world performance nor are they likely to have a sufficiently large enough sample size to detect important signals. In recent years, The FDA Center for Devices and Radiological Health has been promoting the development and use of patient registries to advance infrastructure and methodologies for medical device investigation. The FDA 2012 document, "Strengthening the National System for Medical Device Post-market Surveillance," highlighted registries as a core foundational infrastructure when linked to other complementary data sources, including embedded unique device identification. The Vascular Quality Initiative (VQI) thoracic endovascular aortic repair for type B aortic dissection project is an innovative method of using quality improvement registries to meet the needs of device evaluation after market approval. Here we report the organization and background of this project and highlight the innovation facilitated by collaboration of physicians, the FDA, and device manufacturers. This effort used an existing national network of VQI participants to capture patients undergoing thoracic endovascular aortic repair for acute type B aortic dissection within a registry that aligns with standard practice and existing quality efforts. The VQI captures detailed patient, device, and procedural data for consecutive eligible cases under the auspices of a Patient Safety Organization (PSO). Patients were divided into a 5-year follow-up group (200 acute; 200 chronic dissections) and a 1-year follow-up group (100 acute; 100 chronic). The 5-year cohort required additional imaging details, and the 1-year group required standard VQI registry data entry. The sample size of patients in each of the 5-year acute and chronic dissection arms was achieved ≤24 months of project initiation, and data capture for the 1-year follow-up group is also nearly complete. Data completeness and follow-up has been excellent, and the two FDA-approved devices for dissection are equally represented. Although the completeness of long-term follow-up is yet to be determined, the rapidity of data collection supports the use of this construct for device assessment after market approval. The alignment of this effort with routine clinical practice and ongoing quality improvement initiatives is critical and has required minimal additional effort by practitioners, thus facilitating patient inclusion. Importantly, the success and development of this unique project has helped inform FDA strategy for future device evaluation after market approval. Copyright © 2017 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.

Interactive Electronic Storybooks for Kindergartners to Promote Vocabulary Growth

ERIC Educational Resources Information Center

Smeets, Daisy J. H.; Bus, Adriana G.

2012-01-01

The goals of this study were to examine (a) whether extratextual vocabulary instructions embedded in electronic storybooks facilitated word learning over reading alone and (b) whether instructional formats that required children to invest more effort were more effective than formats that required less effort. A computer-based "assistant" was added…

34 CFR 461.42 - What is the maintenance of effort requirement?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What is the maintenance of effort requirement? 461.42 Section 461.42 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION STATE-ADMINISTERED BASIC GRANT...

34 CFR 461.42 - What is the maintenance of effort requirement?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false What is the maintenance of effort requirement? 461.42 Section 461.42 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION STATE-ADMINISTERED BASIC GRANT...

34 CFR 461.42 - What is the maintenance of effort requirement?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 3 2014-07-01 2014-07-01 false What is the maintenance of effort requirement? 461.42 Section 461.42 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION STATE-ADMINISTERED BASIC GRANT...

34 CFR 461.42 - What is the maintenance of effort requirement?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 3 2012-07-01 2012-07-01 false What is the maintenance of effort requirement? 461.42 Section 461.42 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION STATE-ADMINISTERED BASIC GRANT...

34 CFR 461.42 - What is the maintenance of effort requirement?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 3 2013-07-01 2013-07-01 false What is the maintenance of effort requirement? 461.42 Section 461.42 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION STATE-ADMINISTERED BASIC GRANT...

TOPEX Project Radar Altimeter Development Requirements and Specifications, Version 6.0

NASA Technical Reports Server (NTRS)

Rossi, Laurence C.

2003-01-01

This document provides the guidelines by which the TOPEX Radar Altimeter hardware development effort for the TOPEX flight project shall be implemented and conducted. The conduct of this activity shall take maximum advantage of the efforts expended during the TOPEX Radar Altimeter Advanced Technology Model development program and other related Radar Altimeter development efforts. This document complies with the TOPEX Project Office document 633-420 (D-2218), entitled, "TOPEX Project Requirements and Constraints for the NASA Radar Altimeter" dated December 1987.

Second-order contrast based on the expectation of effort and reinforcement.

PubMed

Clement, Tricia S; Zentall, Thomas R

2002-01-01

Pigeons prefer signals for reinforcement that require greater effort (or time) to obtain over those that require less effort to obtain (T. S. Clement, J. Feltus, D. H. Kaiser, & T. R. Zentall, 2000). Preference was attributed to contrast (or to the relatively greater improvement in conditions) produced by the appearance of the signal when it was preceded by greater effort. In Experiment 1, the authors of the present study demonstrated that the expectation of greater effort was sufficient to produce such a preference (a second-order contrast effect). In Experiments 2 and 3, low versus high probability of reinforcement was substituted for high versus low effort, respectively, with similar results. In Experiment 3, the authors found that the stimulus preference could be attributed to positive contrast (when the discriminative stimuli represented an improvement in the probability of reinforcement) and perhaps also negative contrast (when the discriminative stimuli represented reduction in the probability of reinforcement).

A structure adapted multipole method for electrostatic interactions in protein dynamics

NASA Astrophysics Data System (ADS)

Niedermeier, Christoph; Tavan, Paul

1994-07-01

We present an algorithm for rapid approximate evaluation of electrostatic interactions in molecular dynamics simulations of proteins. Traditional algorithms require computational work of the order O(N2) for a system of N particles. Truncation methods which try to avoid that effort entail untolerably large errors in forces, energies and other observables. Hierarchical multipole expansion algorithms, which can account for the electrostatics to numerical accuracy, scale with O(N log N) or even with O(N) if they become augmented by a sophisticated scheme for summing up forces. To further reduce the computational effort we propose an algorithm that also uses a hierarchical multipole scheme but considers only the first two multipole moments (i.e., charges and dipoles). Our strategy is based on the consideration that numerical accuracy may not be necessary to reproduce protein dynamics with sufficient correctness. As opposed to previous methods, our scheme for hierarchical decomposition is adjusted to structural and dynamical features of the particular protein considered rather than chosen rigidly as a cubic grid. As compared to truncation methods we manage to reduce errors in the computation of electrostatic forces by a factor of 10 with only marginal additional effort.

78 FR 78589 - Uniform Administrative Requirements, Cost Principles, and Audit Requirements for Federal Awards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-26

...To deliver on the promise of a 21st-Century government that is more efficient, effective and transparent, the Office of Management and Budget (OMB) is streamlining the Federal government's guidance on Administrative Requirements, Cost Principles, and Audit Requirements for Federal awards. These modifications are a key component of a larger Federal effort to more effectively focus Federal resources on improving performance and outcomes while ensuring the financial integrity of taxpayer dollars in partnership with non-Federal stakeholders. This guidance provides a governmentwide framework for grants management which will be complemented by additional efforts to strengthen program outcomes through innovative and effective use of grant-making models, performance metrics, and evaluation. This reform of OMB guidance will reduce administrative burden for non-Federal entities receiving Federal awards while reducing the risk of waste, fraud and abuse. This final guidance supersedes and streamlines requirements from OMB Circulars A-21, A-87, A-110, and A-122 (which have been placed in OMB guidances); Circulars A-89, A-102, and A-133; and the guidance in Circular A-50 on Single Audit Act follow-up. Future reform efforts may eventually seek to incorporate the Cost Principles for Hospitals in Department of Health and Human Services regulations. Copies of the OMB Circulars that are superseded by this guidance are available on OMB's Web site at http://www.whitehouse.gov/omb/circulars--default/. The final guidance consolidates the guidance previously contained in the aforementioned citations into a streamlined format that aims to improve both the clarity and accessibility. This final guidance is located in Title 2 of the Code of Federal Regulations. This final guidance does not broaden the scope of applicability from existing government-wide requirements, affecting Federal awards to non-Federal entities including state and local governments, Indian tribes, institutions of higher education, and nonprofit organizations. Parts of it may also apply to for-profit entities in limited circumstances and to foreign entities as described in this guidance and the Federal Acquisition Regulation. This guidance does not change or modify any existing statute or guidance otherwise based on any existing statute. This guidance does not supersede any existing or future authority under law or by executive order or the Federal Acquisition Regulation.

Cognitive Effort Requirements in Recall, Recognition, and Lexical Decision

DTIC Science & Technology

1985-05-01

that the amount of integrative processing required for an item is a function of its preexisting or baseline familiarity level . Low frequency words... Lockhart , Craik , & Jacoby, 1976). In the present study, increased effort, and possibly increased distinctiveness, does not influence hit rates, which are...ing of items. Second, a lexical decision task, which does not require elabo- rative processing , leads to an overall poor level of recall. Furthermore

Army Training: Efforts to Adjust Training Requirements Should Consider the Use of Virtual Training Devices

DTIC Science & Technology

2016-08-01

ARMY TRAINING Efforts to Adjust Training Requirements Should Consider the Use of Virtual Training Devices Report...Requirements Should Consider the Use of Virtual Training Devices What GAO Found In 2010, the Army began modifying its training priorities and goals to...until fiscal year 2017. The Army has taken some steps to improve the integration of virtual training devices into operational training, but gaps in

Moving lips versus moving policy: Can scientists figure out how to do both?

NASA Astrophysics Data System (ADS)

Gleick, P. H.

2009-12-01

Global environmental issues are, well, global. Their complexity and scope make them among the most important issues of our time. Yet they are also among the most difficult to evaluate analytically and to communicate effectively. Scientists, when they choose to communicate with the public or policy makers at all, often find that their messages are often misunderstood, ignored, or simply marginalized, making public communications a less-than rewarding experience. Some methods, however, can prove more effective than others, and in the area of water resources and climate change, two approaches have proven especially effective. The first is to focus on “success stories” as a way to move the discussion from problems to solutions; the second is to focus on regional issues as a way to engage policy makers and the public, for whom the global scope of the challenges may be overwhelming. One additional complexity is how to deal with intentional efforts to obfuscate or misrepresent science. In the climate area, especially, this has long been a challenge, but successful approaches include refusing to let such efforts derail rational policy debates. This requires that scientists understand how science can be misrepresented or misused, and calling attention to such efforts. This presentation will summarize some successful communications efforts in the areas of climate and water from the experience of the Pacific Institute, a leading independent research group addressing these issues.

Transient Inverse Calibration of Site-Wide Groundwater Model to Hanford Operational Impacts from 1943 to 1996--Alternative Conceptual Model Considering Interaction with Uppermost Basalt Confined Aquifer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vermeul, Vincent R.; Cole, Charles R.; Bergeron, Marcel P.

2001-08-29

The baseline three-dimensional transient inverse model for the estimation of site-wide scale flow parameters, including their uncertainties, using data on the transient behavior of the unconfined aquifer system over the entire historical period of Hanford operations, has been modified to account for the effects of basalt intercommunication between the Hanford unconfined aquifer and the underlying upper basalt confined aquifer. Both the baseline and alternative conceptual models (ACM-1) considered only the groundwater flow component and corresponding observational data in the 3-Dl transient inverse calibration efforts. Subsequent efforts will examine both groundwater flow and transport. Comparisons of goodness of fit measures andmore » parameter estimation results for the ACM-1 transient inverse calibrated model with those from previous site-wide groundwater modeling efforts illustrate that the new 3-D transient inverse model approach will strengthen the technical defensibility of the final model(s) and provide the ability to incorporate uncertainty in predictions related to both conceptual model and parameter uncertainty. These results, however, indicate that additional improvements are required to the conceptual model framework. An investigation was initiated at the end of this basalt inverse modeling effort to determine whether facies-based zonation would improve specific yield parameter estimation results (ACM-2). A description of the justification and methodology to develop this zonation is discussed.« less

49 CFR Appendix A to Part 26 - Guidance Concerning Good Faith Efforts

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Guidance Concerning Good Faith Efforts A Appendix... A to Part 26—Guidance Concerning Good Faith Efforts I. When, as a recipient, you establish a... efforts to meet the DBE contract requirements. We emphasize, however, that your determination concerning...

Measuring and Modeling Change in Examinee Effort on Low-Stakes Tests across Testing Occasions

ERIC Educational Resources Information Center

Sessoms, John; Finney, Sara J.

2015-01-01

Because schools worldwide use low-stakes tests to make important decisions, value-added indices computed from test scores must accurately reflect student learning, which requires equal test-taking effort across testing occasions. Evaluating change in effort assumes effort is measured equivalently across occasions. We evaluated the longitudinal…

Δ9-Tetrahydrocannabinol decreases willingness to exert cognitive effort in male rats

PubMed Central

Silveira, Mason M.; Adams, Wendy K.; Morena, Maria; Hill, Matthew N.; Winstanley, Catharine A.

2017-01-01

Background Acceptance of cannabis use is growing. However, prolonged use is associated with diminished psychosocial outcomes, potentially mediated by drug-induced cognitive impairments. Δ9-Tetrahydrocannabinol (THC) is the main psychoactive ingredient in cannabis, yet other phytocannabinoids in the plant, such as cannabidiol (CBD), have unique properties. Given that CBD can modulate the undesirable effects of THC, therapeutic agents, such as nabiximols, contain higher CBD:THC ratios than illicit marijuana. We tested the hypothesis that THC impairs a relevant cognitive function for long-term success, namely willingness to exert cognitive effort for greater rewards, and that CBD could attenuate such decision-making impairments. Methods Male Long–Evans rats (n = 29) performing the rat cognitive effort task (rCET) received acute THC and CBD, independently and concurrently, in addition to other cannabinoids. Rats chose between 2 options differing in reward magnitude, but also in the cognitive effort (attentional load) required to obtain them. Results We found that THC decreased choice of hard trials without impairing the animals’ ability to accurately complete them. Strikingly, this impairment was correlated with CB1 receptor density in the medial prefrontal cortex — an area previously implicated in effortful decision-making. In contrast, CBD did not affect choice. Coadministration of 1:1 CBD:THC matching that in nabiximols modestly attenuated the deleterious effects of THC in “slacker” rats. Limitations Only male rats were investigated, and the THC/CBD coadministration experiment was carried out in a subset of individuals. Conclusion These findings confirm that THC, but not CBD, selectively impairs decision-making involving cognitive effort costs. However, coadministration of CBD only partially ameliorates such THC-induced dysfunction. PMID:28245177

The FTA Method And A Possibility Of Its Application In The Area Of Road Freight Transport

NASA Astrophysics Data System (ADS)

Poliaková, Adela

2015-06-01

The Fault Tree process utilizes logic diagrams to portray and analyse potentially hazardous events. Three basic symbols (logic gates) are adequate for diagramming any fault tree. However, additional recently developed symbols can be used to reduce the time and effort required for analysis. A fault tree is a graphical representation of the relationship between certain specific events and the ultimate undesired event (2). This paper deals to method of Fault Tree Analysis basic description and provides a practical view on possibility of application by quality improvement in road freight transport company.

Intelligent Processing Equipment Within the Environmental Protection Agency

NASA Technical Reports Server (NTRS)

Greathouse, Daniel G.; Nalesnik, Richard P.

1992-01-01

Protection of the environment and environmental remediation requires the cooperation, at all levels, of government and industry. Intelligent processing equipment, in addition to other artificial intelligence based tools, was used by the Environmental Protection Agency to provide personnel safety and improve the efficiency of those responsible for protection and remediation of the environment. These exploratory efforts demonstrate the feasibility and utility of expanding development and widespread use of these tools. A survey of current intelligent processing equipment applications in the Agency is presented and is followed by a brief discussion of possible uses in the future.

Building SAWE Capability as an ANSI Accredited Standards Developer

NASA Technical Reports Server (NTRS)

Cerro, Jeffrey A.; Davis, Ed; Peterson, Eric; Griffiths, William T.; Brooks, Andy; Stratton, Bonnie; Attar, Jose

2014-01-01

This paper presents a 2014 status of the Society of Allied Weight Engineers' process towards becoming an Accredited Standards Developer (ASD) under certification by the United States American National Standards Institute (ANSI). Included is material from the committee's 2013 International presentation, current status, and additional general background material. The document strives to serve as a reference point to assist SAWE Recommended Practice and Standards developers in negotiating United States Standards Strategy, international standards strategy, and the association of SAWE standards and recommended practices to those efforts. Required procedures for SAWE to develop and maintain Recommended Practices and ANSI/SAWE Standards are reviewed.

Independent Orbiter Assessment (IOA): Weibull analysis report

NASA Technical Reports Server (NTRS)

Raffaelli, Gary G.

1987-01-01

The Auxiliary Power Unit (APU) and Hydraulic Power Unit (HPU) Space Shuttle Subsystems were reviewed as candidates for demonstrating the Weibull analysis methodology. Three hardware components were identified as analysis candidates: the turbine wheel, the gearbox, and the gas generator. Detailed review of subsystem level wearout and failure history revealed the lack of actual component failure data. In addition, component wearout data were not readily available or would require a separate data accumulation effort by the vendor. Without adequate component history data being available, the Weibull analysis methodology application to the APU and HPU subsystem group was terminated.

Composition dependent effects in gas chromatography. [used in chemical analysis system onboard unmanned roving vehicle on Mars

NASA Technical Reports Server (NTRS)

Lavoie, R. C.

1974-01-01

Fundamantal concepts are developed which are required to optimize a gas chromatograph-mass spectrometer chemical analysis system suitable for use on an unmanned roving vehicle for Mars exploration. Prior efforts have developed simulation models for the chromatograph which were compared with data obtained from a test facility. Representation of binary systems by superposition was shown to be a first-order approximation and in certain cases large discrepencies were noted. This subtask has as its objective generation of additional binary data and analysis of the observed nonlinear effects.

Can managed care plans control health care costs?

PubMed

Zwanziger, J; Melnick, G A

1996-01-01

The health insurance sector has been transformed in the past fifteen years, with managed care replacing indemnity insurance as the norm. This transformation was intended to change the nature of competition in the health care system so that market forces could be used to control costs. Empirical studies have shown that this objective has been met, as areas with high managed care penetration have tended to have much lower rates of increase in their costs. Creating a more efficient health care system will require additional efforts to produce useful measures of quality and to maintain competitive markets.

Process Development for Automated Solar Cell and Module Production. Task 4: Automated Array Assembly

NASA Technical Reports Server (NTRS)

1979-01-01

A baseline sequence for the manufacture of solar cell modules was specified. Starting with silicon wafers, the process goes through damage etching, texture etching, junction formation, plasma edge etch, aluminum back surface field formation, and screen printed metallization to produce finished solar cells. The cells were then series connected on a ribbon and bonded into a finished glass tedlar module. A number of steps required additional developmental effort to verify technical and economic feasibility. These steps include texture etching, plasma edge etch, aluminum back surface field formation, array layup and interconnect, and module edge sealing and framing.

Thermal barrier coatings for gas turbine and diesel engines

NASA Technical Reports Server (NTRS)

Miller, Robert A.; Brindley, William J.; Bailey, M. Murray

1989-01-01

The present state of development of thin thermal barrier coatings for aircraft gas turbine engines and thick thermal barrier coatings for truck diesel engines is assessed. Although current thermal barrier coatings are flying in certain gas turbine engines, additional advances will be needed for future engines. Thick thermal barrier coatings for truck diesel engines have advanced to the point where they are being seriously considered for the next generation of engine. Since coatings for truck engines is a young field of inquiry, continued research and development efforts will be required to help bring this technology to commercialization.

Zero-gravity atmospheric Cloud Physics Experiment Laboratory; Programmatics report

NASA Technical Reports Server (NTRS)

1974-01-01

The programmatics effort included comprehensive analyses in four major areas: (1) work breakdown structure, (2) schedules, (3) costs, and (4) supporting research and technology. These analyses are discussed in detail in the following sections which identify and define the laboratory project development schedule, cost estimates, funding distributions and supporting research and technology requirements. All programmatics analyses are correlated among themselves and with the technical analyses by means of the work breakdown structure which serves as a common framework for program definition. In addition, the programmatic analyses reflect the results of analyses and plans for reliability, safety, test, and maintenance and refurbishment.

Independent Orbiter Assessment (IOA): Assessment of the communication and tracking subsystem, volume 2

NASA Technical Reports Server (NTRS)

Long, W. C.

1988-01-01

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA effort first completed and analysis of the Communication and Tracking hardware, generating draft failure modes and potential critical items. The IOA results were then compared to the NASA FMEA/CIL baseline. A resolution of each discrepancy from the comparison is provided through additional analysis as required. This report documents the results of that comparison for the Orbiter Communication and Tracking hardware. Volume 2 continues the presentation of IOA worksheets.

Evaluation of control and display configurations for helicopter shipboard operations

NASA Technical Reports Server (NTRS)

Paulk, C. H., Jr.; Donley, S. T.; Hollis, M. K.

1983-01-01

A simulation evaluation of several approach and landing flight-control configurations and of two out-of-the-cockpit display devices (a head-up display and a helmet-mounted display) was performed for the task of landing a helicopter on a destroyer in adverse weather. The results indicated that the ship airwake turbulence was the most significant environmental variable affecting hover performance. In addition, to achieve adequate landing performance, attitude-command control compensation was required for the pilot regardless of the display used. For improved performance with reduced pilot effort, a velocity-command, position-hold control system was desired.

Complementary Reliability-Based Decodings of Binary Linear Block Codes

NASA Technical Reports Server (NTRS)

Fossorier, Marc P. C.; Lin, Shu

1997-01-01

This correspondence presents a hybrid reliability-based decoding algorithm which combines the reprocessing method based on the most reliable basis and a generalized Chase-type algebraic decoder based on the least reliable positions. It is shown that reprocessing with a simple additional algebraic decoding effort achieves significant coding gain. For long codes, the order of reprocessing required to achieve asymptotic optimum error performance is reduced by approximately 1/3. This significantly reduces the computational complexity, especially for long codes. Also, a more efficient criterion for stopping the decoding process is derived based on the knowledge of the algebraic decoding solution.

Terrestrial ecosystems - Isobioclimates of the conterminous United States

USGS Publications Warehouse

Cress, Jill J.; Sayre, Roger G.; Comer, Patrick; Warner, Harumi

2009-01-01

However, the biophysical stratification approach used for the ecosystems modeling effort required a single climate layer that accurately reflected regional variation in wet/dry gradients and hot/cold gradients, with a manageable number of classes. Therefore, the data layers for thermotypes and ombrotypes were combined, yielding 127 unique thermotype-ombrotype combinations.The isobioclimates image shows ombrotypic regions (dry/wet gradients) for each thermotypic (warm/cold) region. Additional information about this map and any of the data developed for the ecosystems modeling of the conterminous United States is available online at http://rmgsc.cr.usgs.gov/ecosystems/.

Emerging Definition of Next-Generation of Aeronautical Communications

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.

2006-01-01

Aviation continues to experience rapid growth. In regions such as the United States and Europe air traffic congestion is constraining operations, leading to major new efforts to develop methodologies and infrastructures to enable continued aviation growth through transformational air traffic management systems. Such a transformation requires better communications linking airborne and ground-based elements. Technologies for next-generation communications, the required capacities, frequency spectrum of operation, network interconnectivity, and global interoperability are now receiving increased attention. A number of major planning and development efforts have taken place or are in process now to define the transformed airspace of the future. These activities include government and industry led efforts in the United States and Europe, and by international organizations. This paper will review the features, approaches, and activities of several representative planning and development efforts, and identify the emerging global consensus on requirements of next generation aeronautical communications systems for air traffic control.

Source segregation and food waste prevention activities in high-density households in a deprived urban area

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rispo, A.; Williams, I.D., E-mail: idw@soton.ac.uk; Shaw, P.J.

Highlights: • Study of waste management in economically and socially deprived high-density housing. • Food waste segregation, prevention and recycling activities investigated. • Study involved a waste audit and household survey of 1034 households. • Populations in such areas are “hard-to-reach”. • Exceptional efforts and additional resources are required to improve performance. - Abstract: A waste audit and a household questionnaire survey were conducted in high-density housing estates in one of the most economically and socially deprived areas of England (Haringey, London). Such areas are under-represented in published research. The study examined source segregation, potential participation in a food wastemore » segregation scheme, and food waste prevention activities in five estates (1034 households). The results showed that: contamination of recyclables containers was low; ca. 28% of the mixed residual waste’s weight was recyclable; food waste comprised a small proportion of the waste from these residents, probably because of their relatively disadvantaged economic circumstances; and the recycling profile reflected an intermittent pattern of behaviour. Although the majority of respondents reported that they would participate in a food waste separation scheme, the response rate was low and many responses of “don’t know” were recorded. Municipalities committed to foster improved diversion from landfill need to recognise that there is no “quick and easy fix”, regardless of local or national aspirations. Lasting and sustained behaviour change requires time and the quality of service provision and associated infrastructure play a fundamental role in facilitating residents to participate effectively in waste management activities that maximise capture of source-segregated materials. Populations in deprived areas that reside in high-rise, high-density dwellings are “hard-to-reach” in terms of participation in recycling schemes and exceptional efforts and additional resources are usually required to improve performance.« less

The IRMIS object model and services API.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saunders, C.; Dohan, D. A.; Arnold, N. D.

2005-01-01

The relational model developed for the Integrated Relational Model of Installed Systems (IRMIS) toolkit has been successfully used to capture the Advanced Photon Source (APS) control system software (EPICS process variables and their definitions). The relational tables are populated by a crawler script that parses each Input/Output Controller (IOC) start-up file when an IOC reboot is detected. User interaction is provided by a Java Swing application that acts as a desktop for viewing the process variable information. Mapping between the display objects and the relational tables was carried out with the Hibernate Object Relational Modeling (ORM) framework. Work is wellmore » underway at the APS to extend the relational modeling to include control system hardware. For this work, due in part to the complex user interaction required, the primary application development environment has shifted from the relational database view to the object oriented (Java) perspective. With this approach, the business logic is executed in Java rather than in SQL stored procedures. This paper describes the object model used to represent control system software, hardware, and interconnects in IRMIS. We also describe the services API used to encapsulate the required behaviors for creating and maintaining the complex data. In addition to the core schema and object model, many important concepts in IRMIS are captured by the services API. IRMIS is an ambitious collaborative effort for defining and developing a relational database and associated applications to comprehensively document the large and complex EPICS-based control systems of today's accelerators. The documentation effort includes process variables, control system hardware, and interconnections. The approach could also be used to document all components of the accelerator, including mechanical, vacuum, power supplies, etc. One key aspect of IRMIS is that it is a documentation framework, not a design and development tool. We do not generate EPICS control system configurations from IRMIS, and hence do not impose any additional requirements on EPICS developers.« less

Low-Cost Rapid Usability Testing: Its Application in Both Product Development and System Implementation.

PubMed

Kushniruk, Andre; Borycki, Elizabeth

2017-01-01

In recent years there has been considerable discussion around the need for certification and regulation of healthcare information technology (IT). In particular, the usability of the products being developed needs to be evaluated. This has included the application of standards designed to ensure the process of system development is user-centered and takes usability into consideration while a product is being developed. In addition to this, in healthcare, organizations in the United States and Europe have also addressed the need and requirement for product certification. However, despite these efforts there are continued reports of unusable and unsafe implementations. In this paper we discuss the need to not only include (and require) usability testing in the one-time development process of health IT products (such as EHRs), but we also argue for the need to additionally develop specific usability standards and requirements for usability testing during the implementation of vendor products (i.e. post product development) in healthcare settings. It is further argued that health IT products that may have been certified regarding their development process will still require application of usability testing in the process of implementing them in real hospital settings in order to ensure usability and safety. This is needed in order to ensure that the final result of both product development and implementation processes take into account and apply the latest usability principles and methods.

Monitoring and control technologies for bioregenerative life support systems/CELSS

NASA Technical Reports Server (NTRS)

Knott, William M.; Sager, John C.

1991-01-01

The development of a controlled Ecological Life Support System (CELSS) will require NASA to develop innovative monitoring and control technologies to operate the different components of the system. Primary effort over the past three to four years has been directed toward the development of technologies to operate a biomass production module. Computer hardware and software required to operate, collect, and summarize environmental data for a large plant growth chamber facility were developed and refined. Sensors and controls required to collect information on such physical parameters as relative humidity, temperature, irradiance, pressure, and gases in the atmosphere; and PH, dissolved oxygen, fluid flow rates, and electrical conductivity in the nutrient solutions are being developed and tested. Technologies required to produce high artificial irradiance for plant growth and those required to collect and transport natural light into a plant growth chamber are also being evaluated. Significant effort was directed towards the development and testing of a membrane nutrient delivery system required to manipulate, seed, and harvest crops, and to determine plant health prior to stress impacting plant productivity are also being researched. Tissue culture technologies are being developed for use in management and propagation of crop plants. Though previous efforts have focussed on development of technologies required to operate a biomass production module for a CELSS, current efforts are expanding to include technologies required to operate modules such as food preparation, biomass processing, and resource (waste) recovery which are integral parts of the CELSS.

High-Resolution Spectroscopic Database for the NASA Earth Observing System Program

NASA Technical Reports Server (NTRS)

Rothman, Laurence

2003-01-01

The purpose of this project is to develop and enhance the HITRAN molecular spectroscopic database and associated software to support the observational programs of the Earth Observing System (EOS). In particular, the focus is on the EOS projects: the Atmospheric Infrared Sounder (AIRS), the High-Resolution Dynamics Limb Sounder (HIRDLS), Measurements of Pollution in the Troposphere (MOPITT), the Tropospheric Emission Spectrometer (TES), and the Stratospheric Aerosol and Gas Experiment (SAGE III). The HITRAN program is also involved in the Ozone Monitoring Experiment (OMI). The data requirements of these programs in terms of spectroscopy are varied with respect to constituents being observed, required remote-sensing parameters, and spectral coverage. A general requisite is for additional spectral parameters and improvements to existing molecular bands sufficient for the simulation of the observations leading to retrieval of the atmospheric state. In addition, cross-section data for heavier molecular species must be expanded and made amenable to modeling in remote sensing. The effort in the project also includes developing software and distribution to make access, manipulation, and use of HITRAN functional to the EOS program.

High Resolution Spectroscopic Database for the NASA Earth Observing System Program

NASA Technical Reports Server (NTRS)

Rothman, Laurence

2004-01-01

The purpose of this project has been to develop and enhance the HITRAN molecular spectroscopic database and associated software to support the observational programs of the Earth Observing System (EOS). Emphasis has been on the EOS projects: the Atmospheric Infrared Sounder (AIRS), the High-Resolution Dynamics Limb Sounder (HIRDLS), Measurements of Pollution in the Troposphere (MOPITT), the Tropospheric Emission Spectrometer (TES), and the Stratospheric Aerosol and Gas Experiment (SAGE III). The HITRAN program is also involved in the Ozone Monitoring Experiment (OMI). The data requirements of these programs in terms of spectroscopy are varied with respect to constituents being observed, required remote-sensing parameters, and spectral coverage. A general requisite is for additional spectral parameters and improvements to existing molecular bands sufficient for the simulation of the observations leading to retrieval of the atmospheric state. In addition, cross-section data for heavier molecular species must be expanded and made amenable to modeling in remote sensing. The effort in the project also includes developing software and distribution to make access, manipulation, and use of HITRAN functional to the EOS program.

High-Resolution Spectroscopic Database for the NASA Earth Observing System Program

NASA Technical Reports Server (NTRS)

Rothman, Laurence S.

2004-01-01

The purpose of this project is to develop and enhance the HITRAN molecular spectroscopic database and associated - software to support the observational programs of the Earth observing System (EOS). In particular, the focus is on the EOS projects: the Atmospheric Infrared Sounder (AIRS), the High-Resolution Dynamics Limb Sounder (HIRDLS), Measurements of Pollution in the Troposphere (MOPITT), the Tropospheric Emission Spectrometer (TES), and the Stratospheric Aerosol and Gas Experiment (SAGE III). The HITRAN program is also involved in the Ozone Monitoring Experiment (OMI). The data requirements of these programs in terms of spectroscopy are varied with respect to constituents being observed, required remote-sensing parameters, and spectral coverage. A general requisite is for additional spectral parameters and improvements to existing molecular bands sufficient for the simulation of the observations leading to retrieval of the atmospheric state. In addition cross-section data for heavier molecular species must be expanded and made amenable to modeling in remote sensing. The effort in the project also includes developing software and distribution to make access, manipulation, and use HITRAN functional to the EOS program.

Semi-Automatic In Silico Gap Closure Enabled De Novo Assembly of Two Dehalobacter Genomes from Metagenomic Data

PubMed Central

Tang, Shuiquan; Gong, Yunchen; Edwards, Elizabeth A.

2012-01-01

Typically, the assembly and closure of a complete bacterial genome requires substantial additional effort spent in a wet lab for gap resolution and genome polishing. Assembly is further confounded by subspecies polymorphism when starting from metagenome sequence data. In this paper, we describe an in silico gap-resolution strategy that can substantially improve assembly. This strategy resolves assembly gaps in scaffolds using pre-assembled contigs, followed by verification with read mapping. It is capable of resolving assembly gaps caused by repetitive elements and subspecies polymorphisms. Using this strategy, we realized the de novo assembly of the first two Dehalobacter genomes from the metagenomes of two anaerobic mixed microbial cultures capable of reductive dechlorination of chlorinated ethanes and chloroform. Only four additional PCR reactions were required even though the initial assembly with Newbler v. 2.5 produced 101 contigs within 9 scaffolds belonging to two Dehalobacter strains. By applying this strategy to the re-assembly of a recently published genome of Bacteroides, we demonstrate its potential utility for other sequencing projects, both metagenomic and genomic. PMID:23284863

Quality assurance and training procedures for computer-aided detection and diagnosis systems in clinical usea)

PubMed Central

Huo, Zhimin; Summers, Ronald M.; Paquerault, Sophie; Lo, Joseph; Hoffmeister, Jeffrey; Armato, Samuel G.; Freedman, Matthew T.; Lin, Jesse; Ben Lo, Shih-Chung; Petrick, Nicholas; Sahiner, Berkman; Fryd, David; Yoshida, Hiroyuki; Chan, Heang-Ping

2013-01-01

Computer-aided detection/diagnosis (CAD) is increasingly used for decision support by clinicians for detection and interpretation of diseases. However, there are no quality assurance (QA) requirements for CAD in clinical use at present. QA of CAD is important so that end users can be made aware of changes in CAD performance both due to intentional or unintentional causes. In addition, end-user training is critical to prevent improper use of CAD, which could potentially result in lower overall clinical performance. Research on QA of CAD and user training are limited to date. The purpose of this paper is to bring attention to these issues, inform the readers of the opinions of the members of the American Association of Physicists in Medicine (AAPM) CAD subcommittee, and thus stimulate further discussion in the CAD community on these topics. The recommendations in this paper are intended to be work items for AAPM task groups that will be formed to address QA and user training issues on CAD in the future. The work items may serve as a framework for the discussion and eventual design of detailed QA and training procedures for physicists and users of CAD. Some of the recommendations are considered by the subcommittee to be reasonably easy and practical and can be implemented immediately by the end users; others are considered to be “best practice” approaches, which may require significant effort, additional tools, and proper training to implement. The eventual standardization of the requirements of QA procedures for CAD will have to be determined through consensus from members of the CAD community, and user training may require support of professional societies. It is expected that high-quality CAD and proper use of CAD could allow these systems to achieve their true potential, thus benefiting both the patients and the clinicians, and may bring about more widespread clinical use of CAD for many other diseases and applications. It is hoped that the awareness of the need for appropriate CAD QA and user training will stimulate new ideas and approaches for implementing such procedures efficiently and effectively as well as funding opportunities to fulfill such critical efforts. PMID:23822459

Achieving excellence--creating customer passion.

PubMed

Scheuing, E E

1999-08-01

Customers are the lifeblood of any organization. Without them, it loses its meaning and purpose. Customers provide incentive, vitality, and growth. Serving them well requires a customer-focused culture and a customer-friendly system. It also requires unrelenting effort toward continuous improvement, but the rewards are well worth the effort: unflinching customer loyalty, sustainable growth, and impressive performance.

Assignment Choice: Do Students Choose Briefer Assignments or Finishing What They Started?

ERIC Educational Resources Information Center

Hawthorn-Embree, Meredith L.; Skinner, Christopher H.; Parkhurst, John; O'Neil, Michael; Conley, Elisha

2010-01-01

Academic skill development requires engagement in effortful academic behaviors. Although students may be more likely to choose to engage in behaviors that require less effort, they also may be motivated to complete assignments that they have already begun. Seventh-grade students (N = 88) began a mathematics computation worksheet, but were stopped…

34 CFR 403.182 - What is the maintenance of fiscal effort requirement?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What is the maintenance of fiscal effort requirement? 403.182 Section 403.182 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY...

ASTM and ASME-BPE Standards--Complying with the Needs of the Pharmaceutical Industry.

PubMed

Huitt, William M

2011-01-01

Designing and building a pharmaceutical facility requires the owner, engineer of record, and constructor to be knowledgeable with regard to the industry codes and standards that apply to this effort. Up until 1997 there were no industry standards directed at the needs and requirements of the pharmaceutical industry. Prior to that time it was a patchwork effort at resourcing and adopting nonpharmaceutical-related codes and standards and then modifying them in order to meet the more stringent requirements of the Food and Drug Administration (FDA). In 1997 the American Society of Mechanical Engineers (ASME) published the first Bioprocessing Equipment (BPE) Standard. Through harmonization efforts this relatively new standard has brought together, scrutinized, and refined industry accepted methodologies together with FDA compliance requirements, and has established an American National Standard that provides a comprehensive set of standards that are integral to the pharmaceutical industry. This article describes various American National Standards, including those developed and published by the American Society for Testing and Materials (ASTM), and how they apply to the pharmaceutical industry. It goes on to discuss the harmonization effort that takes place between the various standards developers in an attempt to prevent conflicts and omissions between the many standards. Also included are examples of tables and figures taken from the ASME-BPE Standard. These examples provide the reader with insight to the relevant content of the ASME-BPE Standard. Designing and building a pharmaceutical facility requires the owner, engineer of record, and constructor to be knowledgeable with regard to the industry codes and standards that apply to this effort. Up until 1997 there were no industry standards directed at the needs and requirements of the pharmaceutical industry. Prior to that time it was a patchwork effort at resourcing and adopting nonpharmaceutical-related codes and standards and then modifying them in order to meet the more stringent requirements of the Food and Drug Administration (FDA). In 1997 the American Society of Mechanical Engineers (ASME) published the first Bioprocessing Equipment (BPE) Standard. In its initial development and ongoing maintenance it works with other American National Standards developers to harmonize the many standards associated with the design, engineering, and construction of bioprocessing facilities. This harmonization effort has established a comprehensive set of standards for the betterment of the pharmaceutical industry at large. This effort is, and will remain, very important as technology, along with new and improved product and processes, evolve into the future.

Dissociable contributions of anterior cingulate cortex and basolateral amygdala on a rodent cost/benefit decision-making task of cognitive effort.

PubMed

Hosking, Jay G; Cocker, Paul J; Winstanley, Catharine A

2014-06-01

Personal success often requires the choice to expend greater effort for larger rewards, and deficits in such effortful decision making accompany a number of illnesses including depression, schizophrenia, and attention-deficit/hyperactivity disorder. Animal models have implicated brain regions such as the basolateral amygdala (BLA) and anterior cingulate cortex (ACC) in physical effort-based choice, but disentangling the unique contributions of these two regions has proven difficult, and effort demands in industrialized society are predominantly cognitive in nature. Here we utilize the rodent cognitive effort task (rCET), a modification of the five-choice serial reaction-time task, wherein animals can choose to expend greater visuospatial attention to obtain larger sucrose rewards. Temporary inactivation (via baclofen-muscimol) of BLA and ACC showed dissociable effects: BLA inactivation caused hard-working rats to 'slack off' and 'slacker' rats to work harder, whereas ACC inactivation caused all animals to reduce willingness to expend mental effort. Furthermore, BLA inactivation increased the time needed to make choices, whereas ACC inactivation increased motor impulsivity. These data illuminate unique contributions of BLA and ACC to effort-based decision making, and imply overlapping yet distinct circuitry for cognitive vs physical effort. Our understanding of effortful decision making may therefore require expanding our models beyond purely physical costs.

Characterization and Modeling of Asphalt Binder Fatigue

NASA Astrophysics Data System (ADS)

Safaei, Farinaz

Fatigue cracking is a primary distress in asphalt pavements caused by the accumulation of damage under repeated traffic loading. Many factors influence fatigue damage in pavements, including pavement structure, environmental conditions, and asphalt mixture volumetric properties. Asphalt binder is the weakest asphalt concrete constituent and, thus, plays a critical role in determining the fatigue resistance of pavements. Therefore, the ability to characterize and model the inherent fatigue performance of an asphalt binder is a necessary first step to design. A comprehensive understanding and prediction of asphalt binder fatigue performance require a suitable experiment coupled with a model to predict how the binder will perform under various traffic, temperature, and structural conditions encountered in the field. The simplified viscoelastic continuum damage (S-VECD) model has been used successfully by researchers to predict the damage evolution in asphalt mixtures for various traffic and climatic conditions using limited uniaxial test data. Although the literature shows promise for applying VECD modeling to asphalt binder fatigue, the past efforts have several shortcomings. It has been demonstrated that flow and adhesion loss can impede DSR fatigue test results. Thus, definition of test conditions (e.g., temperature) where cyclic DSR tests are appropriate for fatigue characterization of binders is necessary. In addition, the applicability of the model to predict fatigue performance under varying loading and thermal history has not been rigorously evaluated. Furthermore, the effects of material nonlinearity have been largely neglected in past modeling efforts for simplicity. In addition, past efforts have employed the parallel plate DSR geometry for the fatigue characterization of asphalt binders. In the parallel plate geometry, the strain depends on the radial distance from the specimen center. Therefore, the material will fail at different rates as a function of radial location. Past efforts have neglected the radial strain gradient, using the apparent shear stress at the sample edge to infer fatigue damage and derive S-VECD model parameters. Apparent edge stress is calculated using linear mapping to the total torque, which is erroneous in the presence of material or geometric nonlinearities (such as cracking). This study seeks to overcome the aforementioned shortcomings of past efforts to improve the ability to characterize and predict asphalt binder fatigue.

DOD Health Care. Additional Efforts Needed To Verify Physicians' Qualifications. Report to Congressional Requesters.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. Div. of Human Resources.

The Department of Defense's (DOD) efforts to assure that its physicians are qualified to perform their assigned duties are discussed. Five sections include: introduction; additional actions needed to help assure that military physicians have proper qualifications; hospital credentialing and privileging systems needed to comply with DOD…

Department of Defense Annual Report on Sexual Harassment and Violence at the Military Service Academies: Academic Program Year 2013-2014

DTIC Science & Technology

2015-02-01

healthy relationships, active bystander intervention, social courage, and core values that support the establishment of mutual respect. In addition ... values that support the establishment of mutual respect. In addition , describe your efforts to review policies that influence culture and behavior at...and core values that support the establishment of mutual respect. In addition , describe your efforts to review policies that influence culture and

Environmental control medical support team

NASA Technical Reports Server (NTRS)

Crump, William J.; Kilgore, Melvin V., Jr.

1988-01-01

The activities conducted in support of the Environmental Control and Life Support Team during December 7, 1987 through September 30, 1988 are summarized. The majority of the ongoing support has focused on the ECLSS area. Through a series of initial meetings with the ECLSS team and technical literature review, an initial list of critical topics was developed. Subtasks were then identified or additional related tasks received as action items from the ECLSS group meetings. Although most of the efforts focused on providing MSFC personnel with information regarding specific questions and problems related to ECLSS issues, other efforts regarding identifying an ECLSS Medical Support Team and constructing data bases of technical information were also initiated and completed. The specific tasks are as follows: (1) Provide support to the mechanical design and integration of test systems as related to microbiological concerns; (2) Assist with design of Human Subjects Test Protocols; (3) Interpretation and recommendations pertaining to air/water quality requirements; (4) Assist in determining the design specifications required as related to the Technical Demonstration Program; (5) Develop a data base of all microorganisms recovered from previous subsystem testing; (6) Estimates of health risk of individual microbes to test subjects; (7) Assist with setting limits for safety of test subjects; (8) Health monitoring of test subjects; (9) Assist in the preparation of test plans; (10) Assist in the development of a QA/QC program to assure the validity, accuracy and precision of the analyses; and (11) Assist in developing test plans required for future man in the loop testing.

RH-TRU Waste Characterization by Acceptable Knowledge at the Idaho National Engineering and Environmental Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schulz, C.; Givens, C.; Bhatt, R.

2003-02-24

Idaho National Engineering and Environmental Laboratory (INEEL) is conducting an effort to characterize approximately 620 drums of remote-handled (RH-) transuranic (TRU) waste currently in its inventory that were generated at the Argonne National Laboratory-East (ANL-E) Alpha Gamma Hot Cell Facility (AGHCF) between 1971 and 1995. The waste was generated at the AGHCF during the destructive examination of irradiated and unirradiated fuel pins, targets, and other materials from reactor programs at ANL-West (ANL-W) and other Department of Energy (DOE) reactors. In support of this effort, Shaw Environmental and Infrastructure (formerly IT Corporation) developed an acceptable knowledge (AK) collection and management programmore » based on existing contact-handled (CH)-TRU waste program requirements and proposed RH-TRU waste program requirements in effect in July 2001. Consistent with Attachments B-B6 of the Waste Isolation Pilot Plant (WIPP) Hazardous Waste Facility Permit (HWFP) and th e proposed Class 3 permit modification (Attachment R [RH-WAP] of this permit), the draft AK Summary Report prepared under the AK procedure describes the waste generating process and includes determinations in the following areas based on AK: physical form (currently identified at the Waste Matrix Code level); waste stream delineation; applicability of hazardous waste numbers for hazardous waste constituents; and prohibited items. In addition, the procedure requires and the draft summary report contains information supporting determinations in the areas of defense relationship and radiological characterization.« less

HSI in NASA: From Research to Implementation

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; Plaga, John A.

2016-01-01

As NASA plans to send human explorers beyond low Earth orbit, onward to Mars and other destinations in the solar system, there will be new challenges to address in terms of HSI. These exploration missions will be quite different from the current and past missions such as Apollo, Shuttle, and International Space Station. The exploration crew will be more autonomous from ground mission control with delayed, and at times, no communication. They will have limited to no resupply for much longer mission durations. Systems to deliver and support extended human habitation at these destinations are extremely complex and unique, presenting new opportunities to employ HSI practices. In order to have an effective and affordable HSI implementation, both research and programmatic efforts are required. Currently, the HSI-related research at NASA is primarily in the area of space human factors and habitability. The purpose is to provide human health and performance countermeasures, knowledge, technologies, and tools to enable safe, reliable, and productive human space exploration beyond low Earth orbit, and update standards, requirements, and processes to verify and validate these requirements. In addition, HSI teams are actively engaged in technology development and demonstration efforts to influence the mission architecture and next-generation vehicle design. Finally, appropriate HSI references have been added to NASA' s systems engineering documentation, and an HSI Practitioner's Guide has been published to help design engineers consider HSI early and continuously in the acquisition process. These current and planned HSI-related activities at NASA will be discussed in this panel.

Post-Closure Challenges of U.S. Department of Energy Sites in Desert Environments of the Southwestern United States - 12095

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gil, April; Steckley, Deborah; Gauthier, Cassie

2012-07-01

U.S. Department of Energy (DOE) sites located in harsh desert environments of the Four Corners region of the southwestern United States require diligence and continual maintenance to ensure the remediation systems function as designed to protect human health and the environment. The geology and climate of this area create issues that are unique to these sites. Geologic formations contain naturally occurring constituents that are often the same as the residual contaminants remaining from historical milling activities at the sites. Although annual precipitation is low, when precipitation events occur they can be of extreme intensity, resulting in erosion and flooding thatmore » can quickly destroy infrastructure and rapidly change site conditions. Winds can cause sand storms and sand mounding that effect site features. These challenging environmental conditions, along with the remote locations of the sites, require active management beyond what was originally envisioned for uranium disposal sites to address concerns in a safe and cost-effective manner. The unique environment of the Four Corners region creates many challenges to the LTSM of LM sites in southwestern United States. The remediation efforts and approaches to infrastructure have to be specifically structured to work in this environment. Often, the systems and structures have to be modified based on lessons learned on how to best adapt to these difficult conditions and remote locations. These sites require continual maintenance and additional efforts compared to many other LM sites. (authors)« less

Dissociable contributions of dorsal and ventral striatal regions on a rodent cost/benefit decision-making task requiring cognitive effort.

PubMed

Silveira, Mason M; Tremblay, Melanie; Winstanley, Catharine A

2018-04-24

Cognitive effort is a ubiquitous process, yet surprisingly little is known about the brain mechanisms responsible for evaluating it. Here, we utilize the rat Cognitive Effort Task (rCET) to probe the striatum's role in deciding between options that vary in the amount of cognitive effort required for success. In the rCET, animals choose to perform either an easy trial, in which the attentional demand is low but the potential reward is small, or a difficult trial which is more attentionally demanding but can yield twice the sugar pellets. Twenty-six male Long Evans rats were trained on the rCET and the effects of pharmacologically inactivating the dorsomedial striatum (DMS) and core region of the nucleus accumbens were determined. Temporary inactivation of the DMS decreased all animals' choice of the high-effort, high-reward option, impaired attentional accuracy, and robustly increased premature responding without impairing general indices of motor ability. The DMS therefore appears necessary for the integration of cognitive signals required for optimal performance. In stark contrast, following temporary inactivation of the ventral striatum, subjects were fundamentally unable to perform the task, as reflected by a drastic decrease in the number of trials initiated and an increase in omitted responses. Together, these data suggest the striatum is likely part of a larger cortico-limbic-striatal network whose function is to optimize decisions requiring cognitive effort costs, at least in the attentional domain, and that striatal subregions have dissociable roles in the adjudication and application of this form of cognitive effort. Copyright © 2018 Elsevier Ltd. All rights reserved.

Clinical test responses to different orthoptic exercise regimes in typical young adults.

PubMed

Horwood, Anna; Toor, Sonia

2014-03-01

The relative efficiency of different eye exercise regimes is unclear, and in particular the influences of practice, placebo and the amount of effort required are rarely considered. This study measured conventional clinical measures following different regimes in typical young adults. A total of 156 asymptomatic young adults were directed to carry out eye exercises three times daily for 2 weeks. Exercises were directed at improving blur responses (accommodation), disparity responses (convergence), both in a naturalistic relationship, convergence in excess of accommodation, accommodation in excess of convergence, and a placebo regime. They were compared to two control groups, neither of which were given exercises, but the second of which were asked to make maximum effort during the second testing. Instruction set and participant effort were more effective than many exercises. Convergence exercises independent of accommodation were the most effective treatment, followed by accommodation exercises, and both regimes resulted in changes in both vergence and accommodation test responses. Exercises targeting convergence and accommodation working together were less effective than those where they were separated. Accommodation measures were prone to large instruction/effort effects and monocular accommodation facility was subject to large practice effects. Separating convergence and accommodation exercises seemed more effective than exercising both systems concurrently and suggests that stimulation of accommodation and convergence may act in an additive fashion to aid responses. Instruction/effort effects are large and should be carefully controlled if claims for the efficacy of any exercise regime are to be made. © 2014 The Authors Ophthalmic & Physiological Optics published by John Wiley & Sons Ltd on behalf of The College of Optometrists.

A streamlined failure mode and effects analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ford, Eric C., E-mail: eford@uw.edu; Smith, Koren; Terezakis, Stephanie

Purpose: Explore the feasibility and impact of a streamlined failure mode and effects analysis (FMEA) using a structured process that is designed to minimize staff effort. Methods: FMEA for the external beam process was conducted at an affiliate radiation oncology center that treats approximately 60 patients per day. A structured FMEA process was developed which included clearly defined roles and goals for each phase. A core group of seven people was identified and a facilitator was chosen to lead the effort. Failure modes were identified and scored according to the FMEA formalism. A risk priority number,RPN, was calculated and usedmore » to rank failure modes. Failure modes with RPN > 150 received safety improvement interventions. Staff effort was carefully tracked throughout the project. Results: Fifty-two failure modes were identified, 22 collected during meetings, and 30 from take-home worksheets. The four top-ranked failure modes were: delay in film check, missing pacemaker protocol/consent, critical structures not contoured, and pregnant patient simulated without the team's knowledge of the pregnancy. These four failure modes hadRPN > 150 and received safety interventions. The FMEA was completed in one month in four 1-h meetings. A total of 55 staff hours were required and, additionally, 20 h by the facilitator. Conclusions: Streamlined FMEA provides a means of accomplishing a relatively large-scale analysis with modest effort. One potential value of FMEA is that it potentially provides a means of measuring the impact of quality improvement efforts through a reduction in risk scores. Future study of this possibility is needed.« less

Impacts of experimentally increased foraging effort on the family: offspring sex matters

USGS Publications Warehouse

Harding, A.M.A.; Kitaysky, A.S.; Hamer, K.C.; Hall, M.E.; Welcker, J.; Talbot, S.L.; Karnovsky, N.J.; Gabrielsen, G.W.; Gremillet, D.

2009-01-01

We examined how short-term impacts of experimentally increased foraging effort by one parent reverberate around the family in a monomorphic seabird (little auk, Alle alle), and whether these effects depend on offspring sex. In many species, more effort is required to rear sons successfully than daughters. However, undernourishment may have stronger adverse consequences for male offspring, which could result in a lower fitness benefit of additional parental effort when rearing a son. We tested two alternative hypotheses concerning the responses of partners to handicapping parents via feather clipping: partners rearing a son are (1) more willing or able to compensate for the reduced contribution of their mate, or (2) less willing or able to compensate, compared to those rearing a daughter. Hypothesis 1 predicts that sons will be no more adversely affected than daughters, and the impact on parents will be greater when rearing a son. Hypothesis 2 predicts that sons will be more adversely affected than daughters, and parents raising a son less affected. Although experimental chicks of both sexes fledged in poorer condition than controls, sons attained higher mass and more rapid growth than daughters in both groups. Clipped parents lost a similar proportion of their initial mass regardless of chick sex, whereas partners of clipped birds lost more mass when rearing a son. These results support hypothesis 1: impacts of increased foraging effort by one parent were felt by offspring, regardless of their sex, and by the partners of manipulated birds, particularly when the offspring was male. ?? 2009 The Association for the Study of Animal Behaviour.

Final Technical Report - SciDAC Cooperative Agreement: Center for Wave Interactions with Magnetohydrodynamics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schnack, Dalton D.

Final technical report for research performed by Dr. Thomas G. Jenkins in collaboration with Professor Dalton D. Schnack on SciDAC Cooperative Agreement: Center for Wave Interactions with Magnetohydrodyanics, DE-FC02-06ER54899, for the period of 8/15/06 - 8/14/11. This report centers on the Slow MHD physics campaign work performed by Dr. Jenkins while at UW-Madison and then at Tech-X Corporation. To make progress on the problem of RF induced currents affect magnetic island evolution in toroidal plasmas, a set of research approaches are outlined. Three approaches can be addressed in parallel. These are: (1) Analytically prescribed additional term in Ohm's law tomore » model the effect of localized ECCD current drive; (2) Introduce an additional evolution equation for the Ohm's law source term. Establish a RF source 'box' where information from the RF code couples to the fluid evolution; and (3) Carry out a more rigorous analytic calculation treating the additional RF terms in a closure problem. These approaches rely on the necessity of reinvigorating the computation modeling efforts of resistive and neoclassical tearing modes with present day versions of the numerical tools. For the RF community, the relevant action item is - RF ray tracing codes need to be modified so that general three-dimensional spatial information can be obtained. Further, interface efforts between the two codes require work as well as an assessment as to the numerical stability properties of the procedures to be used.« less

High-value, cost-conscious health care: concepts for clinicians to evaluate the benefits, harms, and costs of medical interventions.

PubMed

Owens, Douglas K; Qaseem, Amir; Chou, Roger; Shekelle, Paul

2011-02-01

Health care costs in the United States are increasing unsustainably, and further efforts to control costs are inevitable and essential. Efforts to control expenditures should focus on the value, in addition to the costs, of health care interventions. Whether an intervention provides high value depends on assessing whether its health benefits justify its costs. High-cost interventions may provide good value because they are highly beneficial; conversely, low-cost interventions may have little or no value if they provide little benefit. Thus, the challenge becomes determining how to slow the rate of increase in costs while preserving high-value, high-quality care. A first step is to decrease or eliminate care that provides no benefit and may even be harmful. A second step is to provide medical interventions that provide good value: medical benefits that are commensurate with their costs. This article discusses 3 key concepts for understanding how to assess the value of health care interventions. First, assessing the benefits, harms, and costs of an intervention is essential to understand whether it provides good value. Second, assessing the cost of an intervention should include not only the cost of the intervention itself but also any downstream costs that occur because the intervention was performed. Third, the incremental cost-effectiveness ratio estimates the additional cost required to obtain additional health benefits and provides a key measure of the value of a health care intervention.

The 1995 NASA guide to graduate support

NASA Technical Reports Server (NTRS)

1994-01-01

The future of the United States is in the classrooms of America and tomorrow's scientific and technological capabilities are derived from today's investments in research. In 1980, NASA initiated the Graduate Student Researchers Program (GSRP) to cultivate additional research ties to the academic community and to support promising students pursuing advanced degrees in science and engineering. Since then, approximately 1300 students have completed the program's requirements. In 1987, the program was expanded to include the Underrepresented Minority and Disabled Focus (UMDF) Component. This program was designed to increase participation of underrepresented groups in graduate study and research and, ultimately, in space science and aerospace technology careers. Approximately 270 minority students have completed the program's requirements while making significant contributions to the nation's aerospace efforts. Continuing to expand fellowship opportunities, NASA announced the Graduate Student Fellowships in Global Change Research in 1990. Designed to support the rapid growth in the study of earth as a system, more than 250 fellowships have been awarded. And, in 1992, NASA announced opportunities in the multiagency High Performance Computing and Communications (HPCC) Program designed to accelerate the development and application of massively parallel processing. Approximately five new fellowships will be awarded yearly. This booklet will guide you in your efforts to participate in programs for graduate student support.

Is forced oscillation technique the next respiratory function test of choice in childhood asthma.

PubMed

Alblooshi, Afaf; Alkalbani, Alia; Albadi, Ghaya; Narchi, Hassib; Hall, Graham

2017-12-26

Respiratory diseases, especially asthma, are common in children. While spirometry contributes to asthma diagnosis and management in older children, it has a limited role in younger children whom are often unable to perform forced expiratory manoeuvre. The development of novel diagnostic methods which require minimal effort, such as forced oscillation technique (FOT) is, therefore, a welcome and promising addition. FOT involves applying external, small amplitude oscillations to the respiratory system during tidal breathing. Therefore, it requires minimal effort and cooperation. The FOT has the potential to facilitate asthma diagnosis and management in pre-school children by faciliting the objective measurement of baseline lung function and airway reactivity in children unable to successfully perform spirometry. Traditionally the use of FOT was limited to specialised centres. However, the availability of commercial equipment resulted in its use both in research and in clinical practice. In this article, we review the available literature on the use of FOT in childhood asthma. The technical aspects of FOT are described followed by a discussion of its practical aspects in the clinical field including the measurement of baseline lung function and associated reference ranges, bronchodilator responsiveness and bronchial hyper-responsiveness. We also highlight the difficulties and limitations that might be encountered and future research directions.

A CMMI-based approach for medical software project life cycle study.

PubMed

Chen, Jui-Jen; Su, Wu-Chen; Wang, Pei-Wen; Yen, Hung-Chi

2013-01-01

In terms of medical techniques, Taiwan has gained international recognition in recent years. However, the medical information system industry in Taiwan is still at a developing stage compared with the software industries in other nations. In addition, systematic development processes are indispensable elements of software development. They can help developers increase their productivity and efficiency and also avoid unnecessary risks arising during the development process. Thus, this paper presents an application of Light-Weight Capability Maturity Model Integration (LW-CMMI) to Chang Gung Medical Research Project (CMRP) in the Nuclear medicine field. This application was intended to integrate user requirements, system design and testing of software development processes into three layers (Domain, Concept and Instance) model. Then, expressing in structural System Modeling Language (SysML) diagrams and converts part of the manual effort necessary for project management maintenance into computational effort, for example: (semi-) automatic delivery of traceability management. In this application, it supports establishing artifacts of "requirement specification document", "project execution plan document", "system design document" and "system test document", and can deliver a prototype of lightweight project management tool on the Nuclear Medicine software project. The results of this application can be a reference for other medical institutions in developing medical information systems and support of project management to achieve the aim of patient safety.

Using AER to Improve Teacher Education

NASA Astrophysics Data System (ADS)

Ludwig, Randi R.

2013-06-01

In many ways, the astronomy education community is uniquely poised to influence pre-service and in-service teacher preparation. Astro101 courses are among those most commonly taken to satisfy general education requirements for non-science majors, including 9-25% education majors (Deming & Hufnagel, 2001; Rudolph et al. 2010). In addition, the astronomy community's numerous observatories and NASA centers engage in many efforts to satisfy demand for in-service teacher professional development (PD). These efforts represent a great laboratory in which we can apply conclusions from astronomy education research (AER) studies in particular and science education research (SER) in general. Foremost, we can work to align typical Astro101 and teacher PD content coverage to heavily hit topics in the Next Generation Science Standards (http://www.nextgenscience.org/) and utilize methods of teaching those topics that have been identified as successful in AER studies. Additionally, we can work to present teacher education using methodology that has been identified by the SER community as effective for lasting learning. In this presentation, I will highlight some of the big ideas from AER and SER that may be most useful in teacher education, many of which we implement at UT Austin in the Hands-on-Science program for pre-service teacher education and in-service teacher PD.

The evolution of postpairing male mate choice.

PubMed

Lyu, Nan; Servedio, Maria R; Lloyd, Huw; Sun, Yue-Hua

2017-06-01

An increasing number of empirical studies in animals have demonstrated male mate choice. However, little is known about the evolution of postpairing male choice, specifically which occurs by differential allocation of male parental care in response to female signals. We use a population genetic model to examine whether such postpairing male mate choice can evolve when males face a trade-off between parental care and extra-pair copulations (EPCs). Specifically, we assume that males allocate more effort to providing parental care when mated to preferred (signaling) females, but they are then unable to allocate additional effort to seek EPCs. We find that both male preference and female signaling can evolve in this situation, under certain conditions. First, this evolution requires a relatively large difference in parental investment between males mated to preferred versus nonpreferred females. Second, whether male choice and female signaling alleles become fixed in a population versus cycle in their frequencies depends on the additional fecundity benefits from EPCs that are gained by choosy males. Third, less costly female signals enable both signaling and choice alleles to evolve under more relaxed conditions. Our results also provide a new insight into the evolution of sexual conflict over parental care. © 2017 The Author(s). Evolution published by Wiley Periodicals, Inc. on behalf of The Society for the Study of Evolution.

Recruiting African American Churches to Participate in Research: The Learning and Developing Individual Exercise Skills for a Better Life Study

PubMed Central

Whitt-Glover, Melicia C.; Borden, Shanice L.; Alexander, Dayna S.; Kennedy, Betty M.; Goldmon, Moses V.

2016-01-01

Physical activity among African Americans (AA) is low; effective intervention strategies are needed. Community-based settings are useful for delivering health-related interventions in racial/ethnic minority communities. This article describes strategies used to recruit churches for participation in a 22-month intervention designed to increase physical activity levels in AA women. Initial recruitment efforts, led by AA study staff, included direct mailers, phone calls, and in-person meetings with church representatives. After 10 months, only five churches were enrolled. Seven community members with existing partnerships/contacts in the faith community were subsequently hired and an additional 26 churches were enrolled within 6 months. Overall response rate was 45%, and churches required 3.5 ± 3.0 months of multiple contacts prior to enrollment. The main primary contacts within churches were individuals with personal interest in the program and pastors. Prior relationship between the research team and churches did not appear to influence church enrollment as much as community member recruiters. The current study identifies several potential strategies that may be useful for increasing success in efforts to recruit AA churches into studies. Additional research is warranted that tests and compares a variety of recruitment strategies to determine the most successful strategies for recruitment in different populations. PMID:26724311

CRAX/Cassandra Reliability Analysis Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, D.

1999-02-10

Over the past few years Sandia National Laboratories has been moving toward an increased dependence on model- or physics-based analyses as a means to assess the impact of long-term storage on the nuclear weapons stockpile. These deterministic models have also been used to evaluate replacements for aging systems, often involving commercial off-the-shelf components (COTS). In addition, the models have been used to assess the performance of replacement components manufactured via unique, small-lot production runs. In either case, the limited amount of available test data dictates that the only logical course of action to characterize the reliability of these components ismore » to specifically consider the uncertainties in material properties, operating environment etc. within the physics-based (deterministic) model. This not only provides the ability to statistically characterize the expected performance of the component or system, but also provides direction regarding the benefits of additional testing on specific components within the system. An effort was therefore initiated to evaluate the capabilities of existing probabilistic methods and, if required, to develop new analysis methods to support the inclusion of uncertainty in the classical design tools used by analysts and design engineers at Sandia. The primary result of this effort is the CMX (Cassandra Exoskeleton) reliability analysis software.« less

Additional support for the TDK/MABL computer program

NASA Technical Reports Server (NTRS)

Nickerson, G. R.; Dunn, Stuart S.

1993-01-01

An advanced version of the Two-Dimensional Kinetics (TDK) computer program was developed under contract and released to the propulsion community in early 1989. Exposure of the code to this community indicated a need for improvements in certain areas. In particular, the TDK code needed to be adapted to the special requirements imposed by the Space Transportation Main Engine (STME) development program. This engine utilizes injection of the gas generator exhaust into the primary nozzle by means of a set of slots. The subsequent mixing of this secondary stream with the primary stream with finite rate chemical reaction can have a major impact on the engine performance and the thermal protection of the nozzle wall. In attempting to calculate this reacting boundary layer problem, the Mass Addition Boundary Layer (MABL) module of TDK was found to be deficient in several respects. For example, when finite rate chemistry was used to determine gas properties, (MABL-K option) the program run times became excessive because extremely small step sizes were required to maintain numerical stability. A robust solution algorithm was required so that the MABL-K option could be viable as a rocket propulsion industry design tool. Solving this problem was a primary goal of the phase 1 work effort.

Potential Air Pollutant Emissions and Permitting Classifications for Two Biorefinery Process Designs in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eberle, Annika; Bhatt, Arpit; Zhang, Yimin

Advanced biofuel production facilities (biorefineries), such as those envisioned by the United States (U.S.) Renewable Fuel Standard and U.S. Department of Energy's research and development programs, often lack historical air pollutant emissions data, which can pose challenges for obtaining air emission permits that are required for construction and operation. To help fill this knowledge gap, we perform a thorough regulatory analysis and use engineering process designs to assess the applicability of federal air regulations and quantify air pollutant emissions for two feasibility-level biorefinery designs. We find that without additional emission-control technologies both biorefineries would likely be required to obtain majormore » source permits under the Clean Air Act's New Source Review program. The permitting classification (so-called 'major' or 'minor') has implications for the time and effort required for permitting and therefore affects the cost of capital and the fuel selling price. Consequently, we explore additional technically feasible emission-control technologies and process modifications that have the potential to reduce emissions to achieve a minor source permitting classification. Finally, our analysis of air pollutant emissions and controls can assist biorefinery developers with the air permitting process and inform regulatory agencies about potential permitting pathways for novel biorefinery designs.« less

Potential Air Pollutant Emissions and Permitting Classifications for Two Biorefinery Process Designs in the United States

DOE PAGES

Eberle, Annika; Bhatt, Arpit; Zhang, Yimin; ...

2017-04-26

Advanced biofuel production facilities (biorefineries), such as those envisioned by the United States (U.S.) Renewable Fuel Standard and U.S. Department of Energy's research and development programs, often lack historical air pollutant emissions data, which can pose challenges for obtaining air emission permits that are required for construction and operation. To help fill this knowledge gap, we perform a thorough regulatory analysis and use engineering process designs to assess the applicability of federal air regulations and quantify air pollutant emissions for two feasibility-level biorefinery designs. We find that without additional emission-control technologies both biorefineries would likely be required to obtain majormore » source permits under the Clean Air Act's New Source Review program. The permitting classification (so-called 'major' or 'minor') has implications for the time and effort required for permitting and therefore affects the cost of capital and the fuel selling price. Consequently, we explore additional technically feasible emission-control technologies and process modifications that have the potential to reduce emissions to achieve a minor source permitting classification. Finally, our analysis of air pollutant emissions and controls can assist biorefinery developers with the air permitting process and inform regulatory agencies about potential permitting pathways for novel biorefinery designs.« less

Development and evaluation of bioregenerative menus for Mars habitat missions

NASA Astrophysics Data System (ADS)

Cooper, Maya R.; Catauro, Patricia; Perchonok, Michele

2012-12-01

Two 10-day menus were developed in preparation for a Mars habitat mission. The first was built on the assumption, as in previous menu development efforts for closed ecological systems, that the food system would be vegetarian, whereas the second menu introduced shelf-stable, prepackaged meat and entrée items from the current International Space Station (ISS) food system. Both menus delivered an average of 3000 cal daily but the macronutrient proportions resulted in an excess of carbohydrates and dietary fiber per mission nutritional recommendations. Generally, the individual recipes comprising both menus were deemed acceptable by internal sensory panel (average overall acceptability=7.4). The incorporation of existing ISS entrée items did not have a significant effect on the acceptability of the menus. In a final comparison, the food system upmass, or the amount of food that is shipped from the Earth, increased by 297 kg with the addition of prepackaged entrées to the menu. However, the addition of the shipped massed was counterbalanced by a 864 kg reduction in required crops. A further comparison of the crew time required for meal preparation and farming, food system power requirements, and food processing equipment mass is recommended to definitively distinguish the menus.

Potential Air Pollutant Emissions and Permitting Classifications for Two Biorefinery Process Designs in the United States.

PubMed

Eberle, Annika; Bhatt, Arpit; Zhang, Yimin; Heath, Garvin

2017-06-06

Advanced biofuel production facilities (biorefineries), such as those envisioned by the United States (U.S.) Renewable Fuel Standard and U.S. Department of Energy's research and development programs, often lack historical air pollutant emissions data, which can pose challenges for obtaining air emission permits that are required for construction and operation. To help fill this knowledge gap, we perform a thorough regulatory analysis and use engineering process designs to assess the applicability of federal air regulations and quantify air pollutant emissions for two feasibility-level biorefinery designs. We find that without additional emission-control technologies both biorefineries would likely be required to obtain major source permits under the Clean Air Act's New Source Review program. The permitting classification (so-called "major" or "minor") has implications for the time and effort required for permitting and therefore affects the cost of capital and the fuel selling price. Consequently, we explore additional technically feasible emission-control technologies and process modifications that have the potential to reduce emissions to achieve a minor source permitting classification. Our analysis of air pollutant emissions and controls can assist biorefinery developers with the air permitting process and inform regulatory agencies about potential permitting pathways for novel biorefinery designs.

EarthCubed: Community Convergence and Communication

NASA Astrophysics Data System (ADS)

Ryan, J. C.; Black, R.; Davis, R.; Dick, C.; Lee, T.; Allison, M. L.

2015-12-01

What drives engagement across a diverse community with the common goal of creating a robust cyberinfrastructure for the geosciences? Which applications, social media venues and outreach mechanisms solicit the most valuable feedback? Of the dizzying toolkit available for community-building, which tools should receive time, attention and dedication? Finally, how does it all relate to better geoscience research? Research projects in the geosciences are rapidly becoming more interdisciplinary, requiring use of broader data-sets and a multitude of data-types in an effort to explain questions important to both the scientific community and the general public. Effective use of the data and tools available requires excellent community communication and engagement across disciplines, as well as a manner to easily obtain and access those data and tools. For over two years, the EarthCube project has sought to create the most active and engaged community possible, bringing together experts from all across the NSF GEO directorate and its many-faceted disciplines. Initial efforts focused on collecting insight and opinions at in-person "end-user workshops," and informal organization of interest groups and teams. Today, efforts feature an organizational structure with dedicated internal communication and outreach groups. The EarthCube Office has been largely responsible for coordination of these groups and the social media and Internet presence of the project to date, through the creation and curation of the EarthCube.org website, social media channels, live-streaming of meetings, and newsletters. Measures of the effectiveness of these efforts will be presented, to serve as potential reference and guidance for other projects seeking to grow their own communities. In addition, we will discuss how the Office's role in outreach and engagement has changed over the past year with the creation of the Engagement and Liaison Teams, and what it signifies for the Office's role in EarthCube's future.

Modeling the Impact of Uganda's Safe Male Circumcision Program: Implications for Age and Regional Targeting.

PubMed

Kripke, Katharine; Vazzano, Andrea; Kirungi, William; Musinguzi, Joshua; Opio, Alex; Ssempebwa, Rhobbinah; Nakawunde, Susan; Kyobutungi, Sheila; Akao, Juliet N; Magala, Fred; Mwidu, George; Castor, Delivette; Njeuhmeli, Emmanuel

2016-01-01

Uganda aims to provide safe male circumcision (SMC) to 80% of men ages 15-49 by 2016. To date, only 2 million men have received SMC of the 4.2 million men required. In response to age and regional trends in SMC uptake, the country sought to re-examine its targets with respect to age and subnational region, to assess the program's progress, and to refine the implementation approach. The Decision Makers' Program Planning Tool, Version 2.0 (DMPPT 2.0), was used in conjunction with incidence projections from the Spectrum/AIDS Impact Module (AIM) to conduct this analysis. Population, births, deaths, and HIV incidence and prevalence were used to populate the model. Baseline male circumcision prevalence was derived from the 2011 AIDS Indicator Survey. Uganda can achieve the most immediate impact on HIV incidence by circumcising men ages 20-34. This group will also require the fewest circumcisions for each HIV infection averted. Focusing on men ages 10-19 will offer the greatest impact over a 15-year period, while focusing on men ages 15-34 offers the most cost-effective strategy over the same period. A regional analysis showed little variation in cost-effectiveness of scaling up SMC across eight regions. Scale-up is cost-saving in all regions. There is geographic variability in program progress, highlighting two regions with low baseline rates of circumcision where additional efforts will be needed. Focusing SMC efforts on specific age groups and regions may help to accelerate Uganda's SMC program progress. Policy makers in Uganda have already used model outputs in planning efforts, proposing males ages 10-34 as a priority group for SMC in the 2014 application to the Global Fund's new funding model. As scale-up continues, the country should also consider a greater effort to expand SMC in regions with low MC prevalence.

Modeling the Impact of Uganda’s Safe Male Circumcision Program: Implications for Age and Regional Targeting

PubMed Central

Kripke, Katharine; Vazzano, Andrea; Kirungi, William; Musinguzi, Joshua; Opio, Alex; Ssempebwa, Rhobbinah; Nakawunde, Susan; Kyobutungi, Sheila; Akao, Juliet N.; Magala, Fred; Mwidu, George; Castor, Delivette

2016-01-01

Background Uganda aims to provide safe male circumcision (SMC) to 80% of men ages 15–49 by 2016. To date, only 2 million men have received SMC of the 4.2 million men required. In response to age and regional trends in SMC uptake, the country sought to re-examine its targets with respect to age and subnational region, to assess the program’s progress, and to refine the implementation approach. Methods and Findings The Decision Makers’ Program Planning Tool, Version 2.0 (DMPPT 2.0), was used in conjunction with incidence projections from the Spectrum/AIDS Impact Module (AIM) to conduct this analysis. Population, births, deaths, and HIV incidence and prevalence were used to populate the model. Baseline male circumcision prevalence was derived from the 2011 AIDS Indicator Survey. Uganda can achieve the most immediate impact on HIV incidence by circumcising men ages 20–34. This group will also require the fewest circumcisions for each HIV infection averted. Focusing on men ages 10–19 will offer the greatest impact over a 15-year period, while focusing on men ages 15–34 offers the most cost-effective strategy over the same period. A regional analysis showed little variation in cost-effectiveness of scaling up SMC across eight regions. Scale-up is cost-saving in all regions. There is geographic variability in program progress, highlighting two regions with low baseline rates of circumcision where additional efforts will be needed. Conclusion Focusing SMC efforts on specific age groups and regions may help to accelerate Uganda’s SMC program progress. Policy makers in Uganda have already used model outputs in planning efforts, proposing males ages 10–34 as a priority group for SMC in the 2014 application to the Global Fund’s new funding model. As scale-up continues, the country should also consider a greater effort to expand SMC in regions with low MC prevalence. PMID:27410234

Overview of Heat Addition and Efficiency Predictions for an Advanced Stirling Convertor

NASA Technical Reports Server (NTRS)

Wilson, Scott D.; Reid, Terry V.; Schifer, Nicholas A.; Briggs, Maxwell H.

2012-01-01

The U.S. Department of Energy (DOE) and Lockheed Martin Space Systems Company (LMSSC) have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. This generator would use two high-efficiency Advanced Stirling Convertors (ASCs), developed by Sunpower Inc. and NASA Glenn Research Center (GRC). The ASCs convert thermal energy from a radioisotope heat source into electricity. As part of ground testing of these ASCs, different operating conditions are used to simulate expected mission conditions. These conditions require achieving a particular operating frequency, hot end and cold end temperatures, and specified electrical power output for a given net heat input. Microporous bulk insulation is used in the ground support test hardware to minimize the loss of thermal energy from the electric heat source to the environment. The insulation package is characterized before operation to predict how much heat will be absorbed by the convertor and how much will be lost to the environment during operation. In an effort to validate these predictions, numerous tasks have been performed, which provided a more accurate value for net heat input into the ASCs. This test and modeling effort included: (a) making thermophysical property measurements of test setup materials to provide inputs to the numerical models, (b) acquiring additional test data that was collected during convertor tests to provide numerical models with temperature profiles of the test setup via thermocouple and infrared measurements, (c) using multidimensional numerical models (computational fluid dynamics code) to predict net heat input of an operating convertor, and (d) using validation test hardware to provide direct comparison of numerical results and validate the multidimensional numerical models used to predict convertor net heat input. This effort produced high fidelity ASC net heat input predictions, which were successfully validated using specially designed test hardware enabling measurement of heat transferred through a simulated Stirling cycle. The overall effort and results are discussed.

TMI-2 - A Case Study for PWR Instrumentation Performance during a Severe Accident

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joy L. Rempe; Darrell L. Knudson

2013-03-01

The accident at the Three Mile Island Unit 2 (TMI-2) reactor provided a unique opportunity to evaluate sensors exposed to severe accident conditions. Conditions associated with the release of coolant and the hydrogen burn that occurred during this accident exposed instrumentation to harsh conditions, including direct radiation, radioactive contamination, and high humidity with elevated temperatures and pressures. As part of a program initiated in 2012 by the Department of Energy Office of Nuclear Energy (DOE-NE), a review was completed to gain insights from prior TMI-2 sensor survivability and data qualification efforts. This new effort focussed upon a set of sensorsmore » that provided critical data to TMI-2 operators for assessing the condition of the plant and the effects of mitigating actions taken by these operators. In addition, the effort considered sensors providing data required for subsequent accident simulations. Over 100 references related to instrumentation performance and post-accident evaluations of TMI-2 sensors and measurements were reviewed. Insights gained from this review are summarized within this report. For each sensor, a description is provided with the measured data and conclusions related to the sensor’s survivability, and the basis for conclusions about its survivability. As noted within this document, several techniques were invoked in the TMI-2 post-accident evaluation program to assess sensor status, including comparisons with data from other sensors, analytical calculations, laboratory testing, and comparisons with sensors subjected to similar conditions in large-scale integral tests and with sensors that were similar in design but more easily removed from the TMI-2 plant for evaluations. Conclusions from this review provide important insights related to sensor survivability and enhancement options for improving sensor performance. In addition, this document provides recommendations related to the sensor survivability and data evaluation process that could be implemented in upcoming Fukushima Daiichi recovery efforts.« less

TMI-2 - A Case Study for PWR Instrumentation Performance during a Severe Accident

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joy L. Rempe; Darrell L. Knudson

2014-05-01

The accident at the Three Mile Island Unit 2 (TMI-2) reactor provided a unique opportunity to evaluate sensors exposed to severe accident conditions. Conditions associated with the release of coolant and the hydrogen burn that occurred during this accident exposed instrumentation to harsh conditions, including direct radiation, radioactive contamination, and high humidity with elevated temperatures and pressures. As part of a program initiated in 2012 by the Department of Energy Office of Nuclear Energy (DOE-NE), a review was completed to gain insights from prior TMI-2 sensor survivability and data qualification efforts. This new effort focussed upon a set of sensorsmore » that provided critical data to TMI-2 operators for assessing the condition of the plant and the effects of mitigating actions taken by these operators. In addition, the effort considered sensors providing data required for subsequent accident simulations. Over 100 references related to instrumentation performance and post-accident evaluations of TMI-2 sensors and measurements were reviewed. Insights gained from this review are summarized within this report. For each sensor, a description is provided with the measured data and conclusions related to the sensor’s survivability, and the basis for conclusions about its survivability. As noted within this document, several techniques were invoked in the TMI-2 post-accident evaluation program to assess sensor status, including comparisons with data from other sensors, analytical calculations, laboratory testing, and comparisons with sensors subjected to similar conditions in large-scale integral tests and with sensors that were similar in design but more easily removed from the TMI-2 plant for evaluations. Conclusions from this review provide important insights related to sensor survivability and enhancement options for improving sensor performance. In addition, this document provides recommendations related to the sensor survivability and data evaluation process that could be implemented in upcoming Fukushima Daiichi recovery efforts.« less

A Report on the Achievements of Subgroup 19 on Activation Cross Sections of the WPEC, OECD-NEA

NASA Astrophysics Data System (ADS)

Plompen, A. J. M.; Smith, D. L.; Semkova, V. M.

2005-05-01

Subgroup 19 on Activation Cross Sections of the Working Party on Evaluation Cooperation of the OECD-NEA has recently concluded its activities. The goal of the subgroup was to generate a large set of new measured activation cross sections relevant to nuclear applications and make these data available to the nuclear science community. In addition, modeling efforts and sensitivity studies were undertaken to evaluate the use of measured data and model calculations for the prediction of unknown cross sections. The latter addresses the potential of model calculations to satisfy issues on the High Priority Request List when no measured data are available. In the course of the activities of the subgroup over ninety reaction channels were studied experimentally. All except the most recent of these data have been compiled into EXFOR format by members of the subgroup and submitted to OECD- NEA. As a result most of these data can now be retrieved online from the data centers. A systematic comparison was made with the new evaluated data files JEF3.0/EAF2003, JENDL3.3, and ENDF/B-VI.8 and with the current status of the global parameter systematics of the model code TALYS-0.57. In addition, a considerable number of locally optimized parameter sets were developed. Both the global and local approaches emphasize the use of consistent physics modelling for all important reaction channels and nuclides involved in the decay. Comparison of the two approaches allows assessment of the effort required when model estimates to a certain accuracy must be made. Parameter sensitivity studies were undertaken to further assess the accuracy requirements on model parameters if target uncertainties for the cross sections have been specified. The value of this approach has demonstrated itself and indicates the need for model codes that fit all available experimental data in order to connect the data covariance with the covariance of the model predictions. The work of the subgroup was a joint effort between IRMM, ANL, FZ-Jülich, INRNE Sofia, NIPNE Bucharest, IEP and Atomki Debrecen, JAERI, and Tohoku University. A comprehensive review of the subgroup activities will be presented.

Historical Review of Uncommanded Lateral-Directional Motions at Transonic Conditions

NASA Technical Reports Server (NTRS)

Chambers, Joseph R.; Hall, Robert M.

2003-01-01

This paper presents the results of a survey of past experiences with uncommanded lateral-directional motions at transonic speeds during specific military aircraft programs. The effort was undertaken to provide qualitative and quantitative information on past airplane programs that might be of use to the participants in the joint NASA/Navy/Air Force Abrupt Wing Stall (AWS) Program. The AWS Program was initiated because of the experiences of the F/A-l8E/F development program, during which unexpected, severe wing-drop motions were encountered by preproduction aircraft at transonic conditions. These motions were judged to be significantly degrading to the primary mission requirements of the aircraft. Although the problem was subsequently solved for the production version of the F/A-l8E/F, a high-level review panel emphasized the poor understanding of such phenomena and issued a strong recommendation to: "Initiate a national research effort to thoroughly and systematically study the wing drop phenomena." A comprehensive, cooperative NASA/Navy/Air Force AWS Program was designed to respond to provide the required technology requirements. As part of the AWS Program, a work element was directed at a historical review of wing-drop experiences in past aircraft development programs at high subsonic and transonic speeds. In particular, information was requested regarding: specific aircraft configurations that exhibited uncommanded motions and the nature of the motions; geometric characteristics of the air- planes; flight conditions involved in occurrences; relevant data, including wind-tunnel, computational, and flight sources; figures of merit used for analyses; and approaches used to alleviate the problem. An attempt was also made to summarize some of the more important lessons learned from past experiences, and to recommend specific research efforts. In addition to providing technical information to assist the AWS research objectives, the study produced fundamental information regarding the historical challenge of uncommanded lateral-directional motions at transonic conditions and the associated aerodynamic phenomena.

Historical Review of Uncommanded Lateral-Directional Motions At Transonic Conditions (Invited)

NASA Technical Reports Server (NTRS)

Chambers, Joseph R.; Hall, Robert M.

2003-01-01

This paper presents the results of a survey of past experiences with uncommanded lateral-directional motions at transonic speeds during specific military aircraft programs. The effort was undertaken to provide qualitative and quantitative information on past airplane programs that might be of use to the participants in the joint NASA/Navy/Air Force Abrupt Wing Stall (AWS) Program. The AWS Program was initiated because of the experiences of the F/A-18E/F development program, during which unexpected, severe wing-drop motions were encountered by preproduction aircraft at transonic conditions. These motions were judged to be significantly degrading to the primary mission requirements of the aircraft. Although the problem was subsequently solved for the production version of the F/A-l8E/F, a high-level review panel emphasized the poor understanding of such phenomena and issued a strong recommendation to: Initiate a national research effort to thoroughly and systematically study the wing drop phenomena. A comprehensive, cooperative NASA/Navy/Air Force AWS Program was designed to respond to provide the required technology requirements. As part of the AWS Program, a work element was directed at a historical review of wing-drop experiences in past aircraft development programs at high subsonic and transonic speeds. In particular, information was requested regarding: specific aircraft configurations that exhibited uncommanded motions and the nature of the motions; geometric characteristics of the air- planes; flight conditions involved in occurrences; relevant data, including wind-tunnel, computational, and flight sources; figures of merit used for analyses; and approaches used to alleviate the problem. An attempt was also made to summarize some of the more important lessons learned from past experiences, and to recommend specific research efforts. In addition to providing technical information to assist the AWS research objectives, the study produced fundamental information regarding the historical challenge of uncommanded lateral-directional motions at transonic conditions and the associated aerodynamic phenomena.

Options to improve energy efficiency for educational building

NASA Astrophysics Data System (ADS)

Jahan, Mafruha

The cost of energy is a major factor that must be considered for educational facility budget planning purpose. The analysis of energy related issues and options can be complex and requires significant time and detailed effort. One way to facilitate the inclusion of energy option planning in facility planning efforts is to utilize a tool that allows for quick appraisal of the facility energy profile. Once such an appraisal is accomplished, it is then possible to rank energy improvement options consistently with other facility needs and requirements. After an energy efficiency option has been determined to have meaningful value in comparison with other facility planning options, it is then possible to utilize the initial appraisal as the basis for an expanded consideration of additional facility and energy use detail using the same analytic system used for the initial appraisal. This thesis has developed a methodology and an associated analytic model to assist in these tasks and thereby improve the energy efficiency of educational facilities. A detailed energy efficiency and analysis tool is described that utilizes specific university building characteristics such as size, architecture, envelop, lighting, occupancy, thermal design which allows reducing the annual energy consumption. Improving the energy efficiency of various aspects of an educational building's energy performance can be complex and can require significant time and experience to make decisions. The approach developed in this thesis initially assesses the energy design for a university building. This initial appraisal is intended to assist administrators in assessing the potential value of energy efficiency options for their particular facility. Subsequently this scoping design can then be extended as another stage of the model by local facility or planning personnel to add more details and engineering aspects to the initial screening model. This approach can assist university planning efforts to identify the most cost effective combinations of energy efficiency strategies. The model analyzes and compares the payback periods of all proposed Energy Performance Measures (EPMs) to determine which has the greatest potential value.

SLS Navigation Model-Based Design Approach

NASA Technical Reports Server (NTRS)

Oliver, T. Emerson; Anzalone, Evan; Geohagan, Kevin; Bernard, Bill; Park, Thomas

2018-01-01

The SLS Program chose to implement a Model-based Design and Model-based Requirements approach for managing component design information and system requirements. This approach differs from previous large-scale design efforts at Marshall Space Flight Center where design documentation alone conveyed information required for vehicle design and analysis and where extensive requirements sets were used to scope and constrain the design. The SLS Navigation Team has been responsible for the Program-controlled Design Math Models (DMMs) which describe and represent the performance of the Inertial Navigation System (INS) and the Rate Gyro Assemblies (RGAs) used by Guidance, Navigation, and Controls (GN&C). The SLS Navigation Team is also responsible for the navigation algorithms. The navigation algorithms are delivered for implementation on the flight hardware as a DMM. For the SLS Block 1-B design, the additional GPS Receiver hardware is managed as a DMM at the vehicle design level. This paper provides a discussion of the processes and methods used to engineer, design, and coordinate engineering trades and performance assessments using SLS practices as applied to the GN&C system, with a particular focus on the Navigation components. These include composing system requirements, requirements verification, model development, model verification and validation, and modeling and analysis approaches. The Model-based Design and Requirements approach does not reduce the effort associated with the design process versus previous processes used at Marshall Space Flight Center. Instead, the approach takes advantage of overlap between the requirements development and management process, and the design and analysis process by efficiently combining the control (i.e. the requirement) and the design mechanisms. The design mechanism is the representation of the component behavior and performance in design and analysis tools. The focus in the early design process shifts from the development and management of design requirements to the development of usable models, model requirements, and model verification and validation efforts. The models themselves are represented in C/C++ code and accompanying data files. Under the idealized process, potential ambiguity in specification is reduced because the model must be implementable versus a requirement which is not necessarily subject to this constraint. Further, the models are shown to emulate the hardware during validation. For models developed by the Navigation Team, a common interface/standalone environment was developed. The common environment allows for easy implementation in design and analysis tools. Mechanisms such as unit test cases ensure implementation as the developer intended. The model verification and validation process provides a very high level of component design insight. The origin and implementation of the SLS variant of Model-based Design is described from the perspective of the SLS Navigation Team. The format of the models and the requirements are described. The Model-based Design approach has many benefits but is not without potential complications. Key lessons learned associated with the implementation of the Model Based Design approach and process from infancy to verification and certification are discussed

Analyzing and Predicting Effort Associated with Finding and Fixing Software Faults

NASA Technical Reports Server (NTRS)

Hamill, Maggie; Goseva-Popstojanova, Katerina

2016-01-01

Context: Software developers spend a significant amount of time fixing faults. However, not many papers have addressed the actual effort needed to fix software faults. Objective: The objective of this paper is twofold: (1) analysis of the effort needed to fix software faults and how it was affected by several factors and (2) prediction of the level of fix implementation effort based on the information provided in software change requests. Method: The work is based on data related to 1200 failures, extracted from the change tracking system of a large NASA mission. The analysis includes descriptive and inferential statistics. Predictions are made using three supervised machine learning algorithms and three sampling techniques aimed at addressing the imbalanced data problem. Results: Our results show that (1) 83% of the total fix implementation effort was associated with only 20% of failures. (2) Both safety critical failures and post-release failures required three times more effort to fix compared to non-critical and pre-release counterparts, respectively. (3) Failures with fixes spread across multiple components or across multiple types of software artifacts required more effort. The spread across artifacts was more costly than spread across components. (4) Surprisingly, some types of faults associated with later life-cycle activities did not require significant effort. (5) The level of fix implementation effort was predicted with 73% overall accuracy using the original, imbalanced data. Using oversampling techniques improved the overall accuracy up to 77%. More importantly, oversampling significantly improved the prediction of the high level effort, from 31% to around 85%. Conclusions: This paper shows the importance of tying software failures to changes made to fix all associated faults, in one or more software components and/or in one or more software artifacts, and the benefit of studying how the spread of faults and other factors affect the fix implementation effort.

IAF 15 Draft Paper

NASA Technical Reports Server (NTRS)

Menkin, Evgeny; Juillerat, Robert

2015-01-01

With the International Space Station Program transition from assembly to utilization, focus has been placed on the optimization of essential resources. This includes resources both resupplied from the ground and also resources produced by the ISS. In an effort to improve the use of two of these, the ISS Engineering teams, led by the ISS Program Systems Engineering and Integration Office, undertook an effort to modify the techniques use to perform several key on-orbit events. The primary purposes of this endeavor was to make the ISS more efficient in the use of the Russian-supplied fuel for the propulsive attitude control system and also to minimize the impacts to available ISS power due to the positioning of the ISS solar arrays. Because the ISS solar arrays are sensitive to several factors that are present when propulsive attitude control is used, they must be operated in a manner to protect them from damage. This results in periods of time where the arrays must be positioned, rather than autonomously tracking the sun, resulting in negative impacts to power generated by the solar arrays and consumed by both the ISS core systems and payload customers. A reduction in the number and extent of the events each year that require the ISS to use propulsive attitude control simultaneously accomplishes both these goals. Each instance where the ISS solar arrays normal sun tracking mode must be interrupted represent a need for some level of powerdown of equipment. As the magnitude of payload power requirements increases, and the efficiency of the ISS solar arrays decreases, these powerdowns caused by array positioning, will likely become more significant and could begin to negatively impact the payload operations. Through efforts such as this, the total number of events each year that require positioning of the arrays to unfavorable positions for power generation, in order to protect them against other constraints, are reduced. Optimization of propulsive events and transitioning some of them to non-propulsive CMG control significantly reduces propellant usage on the ISS leading to the reduction of the propellant delivery requirement. This results in move available upmass that can be used for delivering critical dry cargo, additional water, air, crew supplies and science experiments.

Computational strategies for alternative single-step Bayesian regression models with large numbers of genotyped and non-genotyped animals.

PubMed

Fernando, Rohan L; Cheng, Hao; Golden, Bruce L; Garrick, Dorian J

2016-12-08

Two types of models have been used for single-step genomic prediction and genome-wide association studies that include phenotypes from both genotyped animals and their non-genotyped relatives. The two types are breeding value models (BVM) that fit breeding values explicitly and marker effects models (MEM) that express the breeding values in terms of the effects of observed or imputed genotypes. MEM can accommodate a wider class of analyses, including variable selection or mixture model analyses. The order of the equations that need to be solved and the inverses required in their construction vary widely, and thus the computational effort required depends upon the size of the pedigree, the number of genotyped animals and the number of loci. We present computational strategies to avoid storing large, dense blocks of the MME that involve imputed genotypes. Furthermore, we present a hybrid model that fits a MEM for animals with observed genotypes and a BVM for those without genotypes. The hybrid model is computationally attractive for pedigree files containing millions of animals with a large proportion of those being genotyped. We demonstrate the practicality on both the original MEM and the hybrid model using real data with 6,179,960 animals in the pedigree with 4,934,101 phenotypes and 31,453 animals genotyped at 40,214 informative loci. To complete a single-trait analysis on a desk-top computer with four graphics cards required about 3 h using the hybrid model to obtain both preconditioned conjugate gradient solutions and 42,000 Markov chain Monte-Carlo (MCMC) samples of breeding values, which allowed making inferences from posterior means, variances and covariances. The MCMC sampling required one quarter of the effort when the hybrid model was used compared to the published MEM. We present a hybrid model that fits a MEM for animals with genotypes and a BVM for those without genotypes. Its practicality and considerable reduction in computing effort was demonstrated. This model can readily be extended to accommodate multiple traits, multiple breeds, maternal effects, and additional random effects such as polygenic residual effects.

PRELIMINARY EVALUATION OF DWPF IMPACTS OF BORIC ACID USE IN CESIUM STRIP FOR SWPF AND MCU

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stone, M.

2010-09-28

A new solvent system is being evaluated for use in the Modular Caustic-Side Solvent Extraction Unit (MCU) and in the Salt Waste Processing Facility (SWPF). The new system includes the option to replace the current dilute nitric acid strip solution with boric acid. To support this effort, the impact of using 0.01M, 0.1M, 0.25M and 0.5M boric acid in place of 0.001M nitric acid was evaluated for impacts on the DWPF facility. The evaluation only covered the impacts of boric acid in the strip effluent and does not address the other changes in solvents (i.e., the new extractant, called MaxCalix,more » or the new suppressor, guanidine). Boric acid additions may lead to increased hydrogen generation during the SRAT and SME cycles as well as change the rheological properties of the feed. The boron in the strip effluent will impact glass composition and could require each SME batch to be trimmed with boric acid to account for any changes in the boron from strip effluent additions. Addition of boron with the strip effluent will require changes in the frit composition and could lead to changes in melt behavior. The severity of the impacts from the boric acid additions is dependent on the amount of boric acid added by the strip effluent. The use of 0.1M or higher concentrations of boric acid in the strip effluent was found to significantly impact DWPF operations while the impact of 0.01M boric acid is expected to be relatively minor. Experimental testing is required to resolve the issues identified during the preliminary evaluation. The issues to be addressed by the testing are: (1) Impact on SRAT acid addition and hydrogen generation; (2) Impact on melter feed rheology; (3) Impact on glass composition control; (4) Impact on frit production; and (5) Impact on melter offgas. A new solvent system is being evaluated for use in the Modular Caustic-Side Solvent Extraction Unit (MCU) and in the Salt Waste Processing Facility (SWPF). The new system includes the option to replace the current dilute nitric acid strip solution with boric acid. To support this effort, the impact of using 0.01M, 0.1M, 0.25M and 0.5M boric acid in place of 0.001M nitric acid was evaluated for impacts on the DWPF facility. The evaluation only covered the impacts of boric acid in the strip effluent and does not address the other changes in solvents (i.e., the new extractant, called MaxCalix, or the new suppressor, guanidine). Experimental testing with the improved solvent is required to determine the impact of any changes in the entrained solvent on DWPF processing.« less

Hot Isostatic Pressing of Engineered Forms of I-AgZ

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jubin, Robert Thomas; Watkins, Thomas R.; Bruffey, Stephanie H.

Hot isostatic pressing (HIP) is being considered for direct conversion of 129I-bearing materials to a radiological waste form. The removal of volatile radioactive 129I from the off-gas of a nuclear fuel reprocessing facility will be necessary to comply with regulatory requirements regarding reprocessing facilities sited within the United States, and any iodine-containing media or solid sorbents generated by offgas abatement will require disposal. Zeolite minerals such as silver-exchanged mordenite (AgZ) have been studied as potential iodine sorbents and will contain 129I as chemisorbed AgI. Oak Ridge National Laboratory (ORNL) has conducted several recent studies on the HIP of both iodine-loadedmore » AgZ (I-AgZ) and other iodine-bearing zeolite minerals. The goal of these research efforts is to achieve a stable, highly leach resistant material that is reduced in volume as compared to bulk iodine-loaded I-AgZ. Through the use of HIP, it may be possible to achieve this with the addition of little or no additional materials (waste formers). Other goals for the process include that the waste form will be tolerant to high temperatures and pressures, not chemically hazardous, and that the process will result in minimal secondary waste generation. This document describes the preparation of 27 samples that are distinct from previous efforts in that they are prepared exclusively with an engineered form of AgZ that is manufactured using a binder. Iodine was incorporated solely by chemisorption. This base material is expected to be more representative of an operational system than were samples prepared previously with pure minerals.« less

R2R--software to speed the depiction of aesthetic consensus RNA secondary structures.

PubMed

Weinberg, Zasha; Breaker, Ronald R

2011-01-04

With continuing identification of novel structured noncoding RNAs, there is an increasing need to create schematic diagrams showing the consensus features of these molecules. RNA structural diagrams are typically made either with general-purpose drawing programs like Adobe Illustrator, or with automated or interactive programs specific to RNA. Unfortunately, the use of applications like Illustrator is extremely time consuming, while existing RNA-specific programs produce figures that are useful, but usually not of the same aesthetic quality as those produced at great cost in Illustrator. Additionally, most existing RNA-specific applications are designed for drawing single RNA molecules, not consensus diagrams. We created R2R, a computer program that facilitates the generation of aesthetic and readable drawings of RNA consensus diagrams in a fraction of the time required with general-purpose drawing programs. Since the inference of a consensus RNA structure typically requires a multiple-sequence alignment, the R2R user annotates the alignment with commands directing the layout and annotation of the RNA. R2R creates SVG or PDF output that can be imported into Adobe Illustrator, Inkscape or CorelDRAW. R2R can be used to create consensus sequence and secondary structure models for novel RNA structures or to revise models when new representatives for known RNA classes become available. Although R2R does not currently have a graphical user interface, it has proven useful in our efforts to create 100 schematic models of distinct noncoding RNA classes. R2R makes it possible to obtain high-quality drawings of the consensus sequence and structural models of many diverse RNA structures with a more practical amount of effort. R2R software is available at http://breaker.research.yale.edu/R2R and as an Additional file.

Bench experiments comparing simulated inspiratory effort when breathing helium-oxygen mixtures to that during positive pressure support with air.

PubMed

Martin, Andrew R; Katz, Ira M; Jenöfi, Katharina; Caillibotte, Georges; Brochard, Laurent; Texereau, Joëlle

2012-10-03

Inhalation of helium-oxygen (He/O2) mixtures has been explored as a means to lower the work of breathing of patients with obstructive lung disease. Non-invasive ventilation (NIV) with positive pressure support is also used for this purpose. The bench experiments presented herein were conducted in order to compare simulated patient inspiratory effort breathing He/O2 with that breathing medical air, with or without pressure support, across a range of adult, obstructive disease patterns. Patient breathing was simulated using a dual-chamber mechanical test lung, with the breathing compartment connected to an ICU ventilator operated in NIV mode with medical air or He/O2 (78/22 or 65/35%). Parabolic or linear resistances were inserted at the inlet to the breathing chamber. Breathing chamber compliance was also varied. The inspiratory effort was assessed for the different gas mixtures, for three breathing patterns, with zero pressure support (simulating unassisted spontaneous breathing), and with varying levels of pressure support. Inspiratory effort increased with increasing resistance and decreasing compliance. At a fixed resistance and compliance, inspiratory effort increased with increasing minute ventilation, and decreased with increasing pressure support. For parabolic resistors, inspiratory effort was lower for He/O2 mixtures than for air, whereas little difference was measured for nominally linear resistance. Relatively small differences in inspiratory effort were measured between the two He/O2 mixtures. Used in combination, reductions in inspiratory effort provided by He/O2 and pressure support were additive. The reduction in inspiratory effort afforded by breathing He/O2 is strongly dependent on the severity and type of airway obstruction. Varying helium concentration between 78% and 65% has small impact on inspiratory effort, while combining He/O2 with pressure support provides an additive reduction in inspiratory effort. In addition, breathing He/O2 alone may provide an alternative to pressure support in circumstances where NIV is not available or poorly tolerated.

The Role of Project Science in the Chandra X-Ray Observatory

NASA Technical Reports Server (NTRS)

O'Dell, Stephen L.; Weisskopf, Martin C.

2006-01-01

The Chandra X-Ray Observatory, one of NASA's Great Observatories, has an outstanding record of scientific and technical success. This success results from the efforts of a team comprising NASA, its contractors, the Smithsonian Astrophysical Observatory, the instrument groups, and other elements of the scientific community, including thousands of scientists who utilize this powerful facility for astrophysical research. We discuss the role of NASA Project Science in the formulation, development, calibration, and operation of the Chandra X-ray Observatory. In addition to representing the scientific community within the Project, Project Science performed what we term "science systems engineering". This activity encompasses translation of science requirements into technical requirements and assessment of the scientific impact of programmatic and technical trades. We briefly describe several examples of science systems engineering conducted by Chandra Project Science.

Rendezvous strategy impacts on CTV avionics design, system reliability requirements, and available collision avoidance maneuvers

NASA Technical Reports Server (NTRS)

Donovan, William J.; Davis, John E.

1991-01-01

Rockwell International is conducting an ongoing program to develop avionics architectures that provide high intrinsic value while meeting all mission objectives. Studies are being conducted to determine alternative configurations that have low life-cycle cost and minimum development risk, and that minimize launch delays while providing the reliability level to assure a successful mission. This effort is based on four decades of providing ballistic missile avionics to the United States Air Force and has focused on the requirements of the NASA Cargo Transfer Vehicle (CTV) program in 1991. During the development of architectural concepts it became apparent that rendezvous strategy issues have an impact on the architecture of the avionics system. This is in addition to the expected impact on propulsion and electrical power duration, flight profiles, and trajectory during approach.

Space shuttle environmental control/life support systems

NASA Technical Reports Server (NTRS)

1972-01-01

This study analyzes and defines a baseline Environmental Control/Life Support System (EC/LSS) for a four-man, seven-day orbital shuttle. In addition, the impact of various mission parameters, crew size, mission length, etc. are examined for their influence on the selected system. Pacing technology items are identified to serve as a guide for application of effort to enhance the total system optimization. A fail safe-fail operation philosophy was utilized in designing the system. This has resulted in a system that requires only one daily routine operation. All other critical item malfunctions are automatically resolved by switching to redundant modes of operation. As a result of this study, it is evident that a practical, flexible, simple and long life, EC/LSS can be designed and manufactured for the shuttle orbiter within the time phase required.

Setting Up a Patient Care Call Center After Potential HCV Exposure.

PubMed

Friedman, Candace; Bucholz, Brigette; Anderson, Susan G; Dwyer, Shon A; Aguirre, Josephine

2016-09-01

Notify patients of a potential exposure to hepatitis C virus, coordinate testing, and provide follow-up counseling. A team was convened to identify various needs in developing a patient care call center. The areas addressed included the following: location, hours, and duration; telephone accessibility; tracking calls and test results; billing; staffing; notification; and potential issues requiring additional evaluation. Disclosure letters were sent to 1275 patients; 57 letters were not deliverable. There were 245 calls to the helpline from October 25 through November 15. Lessons learned centered on hours of availability, staffing, use of an automated phone system and email communication, tracking results, and billing issues. A successful patient notification and follow-up effort requires a multidisciplinary team, internal and external communication, collection of data over an extended period, and coordination of patient information.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harkenrider, Matthew M., E-mail: mharkenrider@lumc.edu; Alite, Fiori; Silva, Scott R.

Cervical cancer is a disease that requires considerable multidisciplinary coordination of care and labor in order to maximize tumor control and survival while minimizing treatment-related toxicity. As with external beam radiation therapy, the use of advanced imaging and 3-dimensional treatment planning has generated a paradigm shift in the delivery of brachytherapy for the treatment of cervical cancer. The use of image-based brachytherapy, most commonly with magnetic resonance imaging (MRI), requires additional attention and effort by the treating physician to prescribe dose to the proper volume and account for adjacent organs at risk. This represents a dramatic change from the classicmore » Manchester approach of orthogonal radiographic images and prescribing dose to point A. We reviewed the history and currently evolving data and recommendations for the clinical use of image-based brachytherapy with an emphasis on MRI-based brachytherapy.« less

Keep Kids in School: A Collaborative Community Effort to Increase Compliance With State-Mandated Health Requirements.

PubMed

Rogers, Valerie; Salzeider, Christine; Holzum, Laura; Milbrandt, Tracy; Zahnd, Whitney; Puczynski, Mark

2016-05-01

It is important that collaborative relationships exist in a community to improve access to needed services for children. Such partnerships foster preventive services, such as immunizations, and other services that protect the health and well-being of all children. A collaborative relationship in Illinois involving an academic health center, a school district, and county health department to address noncompliance with health examination and immunization requirements was formed. Parents were additional partners. Examinations, screenings, and immunizations increased from previous year baselines. Greater fulfillment of health exam mandates resulted in fewer students (39% fewer) excluded from admission to school. The type of partnerships described is feasible and can result in improved health care for school-aged children who otherwise might be excluded both from health services and from school. © 2016, American School Health Association.

Shared vision and autonomous motivation vs. financial incentives driving success in corporate acquisitions

PubMed Central

Clayton, Byron C.

2015-01-01

Successful corporate acquisitions require its managers to achieve substantial performance improvements in order to sufficiently cover acquisition premiums, the expected return of debt and equity investors, and the additional resources needed to capture synergies and accelerate growth. Acquirers understand that achieving the performance improvements necessary to cover these costs and create value for investors will most likely require a significant effort from mergers and acquisitions (M&A) management teams. This understanding drives the common and longstanding practice of offering hefty performance incentive packages to key managers, assuming that financial incentives will induce in-role and extra-role behaviors that drive organizational change and growth. The present study debunks the assumptions of this common M&A practice, providing quantitative evidence that shared vision and autonomous motivation are far more effective drivers of managerial performance than financial incentives. PMID:25610406

Shared vision and autonomous motivation vs. financial incentives driving success in corporate acquisitions.

PubMed

Clayton, Byron C

2014-01-01

Successful corporate acquisitions require its managers to achieve substantial performance improvements in order to sufficiently cover acquisition premiums, the expected return of debt and equity investors, and the additional resources needed to capture synergies and accelerate growth. Acquirers understand that achieving the performance improvements necessary to cover these costs and create value for investors will most likely require a significant effort from mergers and acquisitions (M&A) management teams. This understanding drives the common and longstanding practice of offering hefty performance incentive packages to key managers, assuming that financial incentives will induce in-role and extra-role behaviors that drive organizational change and growth. The present study debunks the assumptions of this common M&A practice, providing quantitative evidence that shared vision and autonomous motivation are far more effective drivers of managerial performance than financial incentives.

High temperature superconductor materials and applications

NASA Technical Reports Server (NTRS)

Doane, George B., III. (Editor); Banks, Curtis; Golben, John

1991-01-01

One of the areas concerned itself with the investigation of the phenomena involved in formulating and making in the laboratory new and better superconductor material with enhanced values of critical current and temperature. Of special interest were the chemistry, physical processes, and environment required to attain these enhanced desirable characteristics. The other area concerned itself with producing high temperature superconducting thin films by pulsed laser deposition techniques. Such films are potentially very useful in the detection of very low power signals. To perform this research high vacuum is required. In the course of this effort, older vacuum chambers were maintained and used. In addition, a new facility is being brought on line. This latter activity has been replete with the usual problems of bringing a new facility into service. Some of the problems are covered in the main body of this report.

Iodine addition using triiodide solutions

NASA Technical Reports Server (NTRS)

Rutz, Jeffrey A.; Muckle, Susan V.; Sauer, Richard L.

1992-01-01

The study develops: a triiodide solution for use in preparing ground service equipment (GSE) water for Shuttle support, an iodine dissolution method that is reliable and requires minimal time and effort to prepare, and an iodine dissolution agent with a minimal concentration of sodium salt. Sodium iodide and hydriodic acid were both found to dissolve iodine to attain the desired GSE iodine concentrations of 7.5 +/- 2.5 mg/L and 25 +/- 5 mg/L. The 1.75:1 and 2:1 sodium iodide solutions produced higher iodine recoveries than the 1.2:1 hydriodic acid solution. A two-hour preparation time is required for the three sodium iodide solutions. The 1.2:1 hydriodic acid solution can be prepared in less than 5 min. Two sodium iodide stock solutions (2.5:1 and 2:1) were found to dissolve iodine without undergoing precipitation.

JSC almanac

NASA Technical Reports Server (NTRS)

1993-01-01

During America's space shuttle flights, press and public attention focuses on the Johnson Space Center in Houston. The press and public often put questions to JSC technical and management staff. This fourth JSC Almanac supplies answers for many such questions, and provide an informational resource for speeches to general interest groups. This Almanac is not necessarily comprehensive or definitive. It is not intended as a statement of JSC or NASA policy. However, it does provide a much needed compilation of information from diverse sources. These sources are given as references, permitting the reader to obtain additional information as required. While every effort has been made to ensure accuracy and to reconcile statistics, users requiring the most up-to-date and accurate information should contact the office supplying the information at issue. The Almanac is updated periodically as needed. The following offices were responsible for supplying material for this update.

Mist net effort required to inventory a forest bat species assemblage.

Treesearch

Theodore J. Weller; Danny C. Lee

2007-01-01

Little quantitative information exists about the survey effort necessary to inventory temperate bat species assemblages. We used a bootstrap resampling lgorithm to estimate the number of mist net surveys required to capture individuals from 9 species at both study area and site levels using data collected in a forested watershed in northwestern California, USA, during...

34 CFR 403.183 - Under what circumstances may the Secretary waive the maintenance of effort requirement?

Code of Federal Regulations, 2010 CFR

2010-07-01

... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Financial Conditions Must Be Met by a State? § 403... 34 Education 3 2010-07-01 2010-07-01 false Under what circumstances may the Secretary waive the maintenance of effort requirement? 403.183 Section 403.183 Education Regulations of the Offices of the...

Automated Estimation Of Software-Development Costs

NASA Technical Reports Server (NTRS)

Roush, George B.; Reini, William

1993-01-01

COSTMODL is automated software development-estimation tool. Yields significant reduction in risk of cost overruns and failed projects. Accepts description of software product developed and computes estimates of effort required to produce it, calendar schedule required, and distribution of effort and staffing as function of defined set of development life-cycle phases. Written for IBM PC(R)-compatible computers.

Adaptive Reward Pursuit: How Effort Requirements Affect Unconscious Reward Responses and Conscious Reward Decisions

ERIC Educational Resources Information Center

Bijleveld, Erik; Custers, Ruud; Aarts, Henk

2012-01-01

When in pursuit of rewards, humans weigh the value of potential rewards against the amount of effort that is required to attain them. Although previous research has generally conceptualized this process as a deliberate calculation, recent work suggests that rudimentary mechanisms--operating without conscious intervention--play an important role as…

34 CFR 461.44 - How does a State request a waiver of the maintenance of effort requirement?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 3 2014-07-01 2014-07-01 false How does a State request a waiver of the maintenance of effort requirement? 461.44 Section 461.44 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION...

34 CFR 461.44 - How does a State request a waiver of the maintenance of effort requirement?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 3 2012-07-01 2012-07-01 false How does a State request a waiver of the maintenance of effort requirement? 461.44 Section 461.44 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION...

34 CFR 461.44 - How does a State request a waiver of the maintenance of effort requirement?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 3 2013-07-01 2013-07-01 false How does a State request a waiver of the maintenance of effort requirement? 461.44 Section 461.44 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION...

34 CFR 461.44 - How does a State request a waiver of the maintenance of effort requirement?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false How does a State request a waiver of the maintenance of effort requirement? 461.44 Section 461.44 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION...

34 CFR 461.44 - How does a State request a waiver of the maintenance of effort requirement?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false How does a State request a waiver of the maintenance of effort requirement? 461.44 Section 461.44 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION ADULT EDUCATION...

Detonation Product EOS Studies: Using ISLS to Refine Cheetah

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zaug, J M; Howard, W M; Fried, L E

2001-08-08

Knowledge of an effective interatomic potential function underlies any effort to predict or rationalize the properties of solids and liquids. The experiments we undertake are directed towards determination of equilibrium and dynamic properties of simple fluids at densities sufficiently high that traditional computational methods and semi-empirical forms successful at ambient conditions may require reconsideration. In this paper we present high-pressure and temperature experimental sound speed data on a simple fluid, methanol. Impulsive Stimulated Light Scattering (ISLS) conducted on diamond-anvil cell (DAC) encapsulated samples offers an experimental approach to determine cross-pair potential interactions through equation of state determinations. In addition themore » kinetics of structural relaxation in fluids can be studied. We compare our experimental results with our thermochemical computational model Cheetah. Computational models are systematically improved with each addition of experimental data.« less

High-Resolution Spectroscopic Database for the NASA Earth Observing System Program

NASA Technical Reports Server (NTRS)

Rothman, Laurence S.; Starr, David (Technical Monitor)

2002-01-01

The purpose of this project is to develop and enhance the HITRAN molecular spectroscopic database and associated software to support the observational programs of the Earth Observing System (EOS). In particular, the focus is on the EOS projects: the Atmospheric Infrared Sounder (AIRS), the High-Resolution Dynamics Limb Sounder (HIRDLS), Measurements of Pollution in the Troposphere (MOPITT), the Tropospheric Emission Spectrometer (TES), and the Stratospheric Aerosol and Gas Experiment (SAGE III). The data requirements of these programs in terms of spectroscopy are varied, but usually call for additional spectral parameters or improvements to existing molecular bands. In addition, cross-section data for heavier molecular species must be expanded and made amenable to modeling in remote sensing. The effort in the project also includes developing software and distribution to make access, manipulation, and use of HITRAN functional to the EOS program.

Commercial Crew Development Program Overview

NASA Technical Reports Server (NTRS)

Russell, Richard W.

2011-01-01

NASA's Commercial Crew Development Program is designed to stimulate efforts within the private sector that will aid in the development and demonstration of safe, reliable, and cost-effective space transportation capabilities. With the goal of delivery cargo and eventually crew to Low Earth Orbit (LEO) and the International Space Station (ISS) the program is designed to foster the development of new spacecraft and launch vehicles in the commercial sector. Through Space Act Agreements (SAAs) in 2011 NASA provided $50M of funding to four partners; Blue Origin, The Boeing Company, Sierra Nevada Corporation, and SpaceX. Additional, NASA has signed two unfunded SAAs with ATK and United Space Alliance. This paper will give a brief summary of these SAAs. Additionally, a brief overview will be provided of the released version of the Commercial Crew Development Program plans and requirements documents.

Requirements, Verification, and Compliance (RVC) Database Tool

NASA Technical Reports Server (NTRS)

Rainwater, Neil E., II; McDuffee, Patrick B.; Thomas, L. Dale

2001-01-01

This paper describes the development, design, and implementation of the Requirements, Verification, and Compliance (RVC) database used on the International Space Welding Experiment (ISWE) project managed at Marshall Space Flight Center. The RVC is a systems engineer's tool for automating and managing the following information: requirements; requirements traceability; verification requirements; verification planning; verification success criteria; and compliance status. This information normally contained within documents (e.g. specifications, plans) is contained in an electronic database that allows the project team members to access, query, and status the requirements, verification, and compliance information from their individual desktop computers. Using commercial-off-the-shelf (COTS) database software that contains networking capabilities, the RVC was developed not only with cost savings in mind but primarily for the purpose of providing a more efficient and effective automated method of maintaining and distributing the systems engineering information. In addition, the RVC approach provides the systems engineer the capability to develop and tailor various reports containing the requirements, verification, and compliance information that meets the needs of the project team members. The automated approach of the RVC for capturing and distributing the information improves the productivity of the systems engineer by allowing that person to concentrate more on the job of developing good requirements and verification programs and not on the effort of being a "document developer".

The MICRO-BOSS scheduling system: Current status and future efforts

NASA Technical Reports Server (NTRS)

Sadeh, Norman M.

1992-01-01

In this paper, a micro-opportunistic approach to factory scheduling was described that closely monitors the evolution of bottlenecks during the construction of the schedule and continuously redirects search towards the bottleneck that appears to be most critical. This approach differs from earlier opportunistic approaches, as it does not require scheduling large resource subproblems or large job subproblems before revising the current scheduling strategy. This micro-opportunistic approach was implemented in the context of the MICRO-BOSS factory scheduling system. A study comparing MICRO-BOSS against a macro-opportunistic scheduler suggests that the additional flexibility of the micro-opportunistic approach to scheduling generally yields important reductions in both tardiness and inventory. Current research efforts include: adaptation of MICRO-BOSS to deal with sequence-dependent setups and development of micro-opportunistic reactive scheduling techniques that will enable the system to patch the schedule in the presence of contingencies such as machine breakdowns, raw materials arriving late, job cancellations, etc.

Cognitive Analysis of Decision Support for Antibiotic Prescribing at the Point of Ordering in a Neonatal Intensive Care Unit

PubMed Central

Sheehan, Barbara; Kaufman, David; Stetson, Peter; Currie, Leanne M.

2009-01-01

Computerized decision support systems have been used to help ensure safe medication prescribing. However, the acceptance of these types of decision support has been reported to be low. It has been suggested that decreased acceptance may be due to lack of clinical relevance. Additionally, cognitive fit between the user interface and clinical task may impact the response of clinicians as they interact with the system. In order to better understand clinician responses to such decision support, we used cognitive task analysis methods to evaluate clinical alerts for antibiotic prescribing in a neonatal intensive care unit. Two methods were used: 1) a cognitive walkthrough; and 2) usability testing with a ‘think-aloud’ protocol. Data were analyzed for impact on cognitive effort according to categories of cognitive distance. We found that responses to alerts may be context specific and that lack of screen cues often increases cognitive effort required to use a system. PMID:20351922

Microgravity Science and Applications Program tasks, 1986 revision

NASA Technical Reports Server (NTRS)

1987-01-01

The Microgravity Science and Applications (MSA) program is directed toward research in the science and technology of processing materials under conditions of low gravity to provide a detailed examination of the constraints imposed by gravitational forces on Earth. The program is expected to lead to the development of new materials and processes in commercial applications adding to this nation's technological base. The research studies emphasize the selected materials and processes that will best elucidate the limitations due to gravity and demonstrate the enhanced sensitivity of control of processes that may be provided by the weightless environment of space. Primary effort is devoted to a study of the specific areas of research which reveals potential value in the initial investigations of the previous decades. Examples of previous process research include crystal growth and directional solidification of metals; containerless processing of reactive materials; synthesis and separation of biological materials; etc. Additional efforts will be devoted to identifying the special requirements which drive the design of hardware to reduce risk in future developments.

The Internet as a source of drugs of abuse.

PubMed

Forman, Robert F; Marlowe, Douglas B; McLellan, A Thomas

2006-10-01

The Internet is a vital medium for communication, entertainment, and commerce, with more than 1 billion individuals connected worldwide. In addition to the many positive functions served by the Internet, it also has been used to facilitate the illicit sale of controlled substances. No-prescription websites (NPWs) offer--and then actually sell--controlled substances over the Internet without a valid prescription. NPW monitoring studies have focused primarily on the availability of prescription opioid medications, although many other drugs of abuse also are available online. Research indicates that these NPW sites are prevalent. Google or Yahoo searches simply using the term "Vicodin" return 40% to 50% NPWs in the top 100 sites. Thus, NPWs represent an important development in the sale of illicit drugs because of the ease with which controlled substances can be sold with relative anonymity. The emergence of NPWs requires new law enforcement and public health initiatives; continued monitoring efforts will determine whether efforts to reduce the availability of NPWs are successful.

Current situation and issue of Industrial Accident Compensation insurance.

PubMed

Kim, Inah; Rhie, Jeongbae; Yoon, Jo-Duk; Kim, Jinsoo; Won, Jonguk

2012-05-01

Industrial Accident Compensation Insurance (IACI) has a history of about 50 yr, and is the oldest social insurance system in Korea. After more than 20 times of revision improvements in benefits, its contents and claim systems have been upgraded. It became the protector of injured workers and their families, and at the same time became the system which could cope with both financial burden of employers and their responsibilities. However, there are some issues to be reformed to upgrade the IACI: 1) the problems in the approval system of occupational diseases, 2) quality improvement of workers' compensation medical care, 3) vocational rehabilitation and return to work, 4) workers' compensation premiums and out-of-pocket money of injured workers, 5) issues in application of IACI. Growth of IACI cannot be achieved by an effort of an individual. Efforts by workers, owners, and government, in addition to physicians and welfare professionals toward the same goal are required for the next level improvement of IACI.

Brewing for Students: An Inquiry-Based Microbiology Lab †

PubMed Central

Sato, Brian K.; Alam, Usman; Dacanay, Samantha J.; Lee, Amanda K.; Shaffer, Justin F.

2015-01-01

In an effort to improve and assess student learning, there has been a push to increase the incorporation of discovery-driven modules and those that contain real-world relevance into laboratory curricula. To further this effort, we have developed, implemented, and assessed an undergraduate microbiology laboratory experiment that requires students to use the scientific method while brewing beer. The experiment allows students to brew their own beer and characterize it based on taste, alcohol content, calorie content, pH, and standard reference method. In addition, we assessed whether students were capable of achieving the module learning objectives through a pre-/posttest, student self-evaluation, exam-embedded questions, and an associated worksheet. These objectives included describing the role of the brewing ingredients and predicting how altering the ingredients would affect the characteristics of the beer, amongst others. By completing this experimental module, students accomplished the module objectives, had greater interest in brewing, and were more likely to view beer in scientific terms. Journal of Microbiology & Biology Education PMID:26753030

Investigation of Severe Craniomaxillofacial Battle Injuries Sustained by U.S. Service Members: A Case Series

PubMed Central

Brown Baer, Pamela R.; Wenke, Joseph C.; Thomas, Steven J.; Hale, Colonel Robert G.

2012-01-01

This case series describes craniomaxillofacial battle injuries, currently available surgical techniques, and the compromised outcomes of four service members who sustained severe craniomaxillofacial battle injuries in Iraq or Afghanistan. Demographic information, diagnostic evaluation, surgical procedures, and outcomes were collected and detailed with a follow-up of over 2 years. Reconstructive efforts with advanced, multidisciplinary, and multiple revision procedures were indicated; the full scope of conventional surgical options and resources were utilized. Patients experienced surgical complications, including postoperative wound dehiscence, infection, flap failure, inadequate mandibular healing, and failure of fixation. These complications required multiple revisions and salvage interventions. In addition, facial burns complicated reconstructive efforts by delaying treatment, decreasing surgical options, and increasing procedural numbers. All patients, despite multiple surgeries, continue to have functional and aesthetic deficits as a result of their injuries. Currently, no conventional treatments are available to satisfactorily reconstruct the face severely ravaged by explosive devices to an acceptable level, much less to natural form and function. PMID:24294409

An approach for using AVHRR data to monitor U.S. great plains grasslands

USGS Publications Warehouse

Reed, B.C.; Loveland, Thomas R.; Tieszen, L.L.

1996-01-01

Environmental monitoring requires regular observations regarding the status of the landscape- The concept behind most monitoring efforts using satellite data involve deriving normalized difference vegetation index (NDVI) values or accumulating the NDVI over a specified time period. These efforts attempt to estimate the continuous growth of green biomass by using continuous additions of NDVI as a surrogate measure. To build upon this concept, this study proposes three refinements; 1) use an objective definition of the current growing season to adjust the time window during which the NDVI is accumulated, 2) accumulate only the NDVI values which are affected by green vegetation, and 3) base monitoring units upon land cover type. These refinements improve the sensitivity of detecting interannual vegetation variability, reduce the need for extensive and detailed knowledge of ground conditions and crop calendars, provide a framework in which several types of monitoring can take place over diverse land cover types, and provide an objective time frame during which monitoring takes place.

Columbia River food webs: Developing a broader scientific foundation for river restoration

USGS Publications Warehouse

Alldredge, J. Richard; Beauchamp, David; Bisson, Peter A.; Congleton, James; Henny, Charles; Huntly, Nancy; Lamberson, Roland; Levings, Colin; Naiman, Robert J.; Pearcy, William; Rieman, Bruce; Ruggerone, Greg; Scarnecchia, Dennis; Smouse, Peter; Wood, Chris C.

2011-01-01

The objectives of this report are to provide a fundamental understanding of aquatic food webs in the Columbia River Basin and to illustrate and summarize their influences on native fish restoration efforts. The spatial scope addresses tributaries, impoundments, the free-flowing Columbia and Snake rivers, as well as the estuary and plume. Achieving the Council's vision for the Columbia River Fish and Wildlife Program (NPCC 2009-09) of sustaining a "productive and diverse community" that provides "abundant" harvest, is best accomplished through a time-prioritized action plan, one that complements other approaches while addressing important challenges and uncertainties related to the Basin's food webs. Note that the oceanic food webs, although of immense importance in sustaining fish populations, are not considered beyond the plume since they involve an additional set of complex and rapidly evolving issues. An analysis of oceanic food webs of relevance to the Columbia River requires a separately focused effort (e.g., Hoegh- Guldberg and Bruno 2010).

Development of breeding populations of rhesus macaques (Macaca mulatta) that are specific pathogen-free for rhesus cytomegalovirus.

PubMed

Barry, Peter A; Strelow, Lisa

2008-02-01

Development of breeding colonies of rhesus macaques (Macaca mulatta) that are specific pathogen-free (SPF) for rhesus cytomegalovirus (RhCMV) is relatively straightforward and requires few modifications from current SPF programs. Infants separated from the dam at or within a few days of birth and cohoused with similarly treated animals remain RhCMV seronegative indefinitely, provided they are never directly or indirectly exposed to a RhCMV-infected monkey. By systematically cohousing seronegative animals into larger social cohorts, breeding populations of animals SPF for RhCMV can be established. The additional costs involved in expanding the current definition of SPF status to include RhCMV are incremental compared with the money already being spent on existing SPF efforts. Moreover, the large increase in research opportunities available for RhCMV-free animals arguably would far exceed the development costs. Potential new areas of research and further expansion of existing research efforts involving these newly defined SPF animals would have direct implications for improvements in human health.

DART: Delta Advanced Reusable Transport. An alternate manned space system proposal

NASA Technical Reports Server (NTRS)

1991-01-01

The Delta Advanced Reusable Transport (DART) craft is being developed to add, multiple, rapid, and cost effective space access to the U.S. capability and to further the efforts towards a permanent space presence. The DART craft provides an augmentative and an alternative system to the Shuttle. As a supplement launch vehicle, the DART adds low cost and easily accessible transport of crew and cargo to specific space destinations to the U.S. program. This adds significant opportunities for manned rated missions that do not require Shuttle capabilities. In its alternative role, the DART can provide emergency space access and satellite repair, the continuation of scientific research, and the furthering of U.S. manned efforts in the event of Shuttle incapabilities. In addition, the DART is being designed for Space Station Freedom compatibility, including its use as a 'lifeboat' emergency reentry craft for Freedom astronauts, as well as the transport of crew and cargo for station resupply.

Brewing for Students: An Inquiry-Based Microbiology Lab.

PubMed

Sato, Brian K; Alam, Usman; Dacanay, Samantha J; Lee, Amanda K; Shaffer, Justin F

2015-12-01

In an effort to improve and assess student learning, there has been a push to increase the incorporation of discovery-driven modules and those that contain real-world relevance into laboratory curricula. To further this effort, we have developed, implemented, and assessed an undergraduate microbiology laboratory experiment that requires students to use the scientific method while brewing beer. The experiment allows students to brew their own beer and characterize it based on taste, alcohol content, calorie content, pH, and standard reference method. In addition, we assessed whether students were capable of achieving the module learning objectives through a pre-/posttest, student self-evaluation, exam-embedded questions, and an associated worksheet. These objectives included describing the role of the brewing ingredients and predicting how altering the ingredients would affect the characteristics of the beer, amongst others. By completing this experimental module, students accomplished the module objectives, had greater interest in brewing, and were more likely to view beer in scientific terms. Journal of Microbiology & Biology Education.

Progress toward a reduced phage genetic code.

PubMed

Yao, Anzhi; Reed, Sean A; Koh, Minseob; Yu, Chenguang; Luo, Xiaozhou; Mehta, Angad P; Schultz, Peter G

2018-03-26

All known living organisms use at least 20 amino acids as the basic building blocks of life. Efforts to reduce the number of building blocks in a replicating system to below the 20 canonical amino acids have not been successful to date. In this work, we use filamentous phage as a model system to investigate the feasibility of removing methionine (Met) from the proteome. We show that all 24 elongation Met sites in the M13 phage genome can be replaced by other canonical amino acids. Most of these changes involve substitution of methionine by leucine (Leu), but in some cases additional compensatory mutations are required. Combining Met substituted sites in the proteome generally led to lower viability/infectivity of the mutant phages, which remains the major challenge in eliminating all methionines from the phage proteome. To date a total of 15 (out of all 24) elongation Mets have been simultaneously deleted from the M13 proteome, providing a useful foundation for future efforts to minimize the genetic code. Copyright © 2018. Published by Elsevier Ltd.

Exploring the repetition bias in voluntary task switching.

PubMed

Mittelstädt, Victor; Dignath, David; Schmidt-Ott, Magdalena; Kiesel, Andrea

2018-01-01

In the voluntary task-switching paradigm, participants are required to randomly select tasks. We reasoned that the consistent finding of a repetition bias (i.e., participants repeat tasks more often than expected by chance) reflects reasonable adaptive task selection behavior to balance the goal of random task selection with the goals to minimize the time and effort for task performance. We conducted two experiments in which participants were provided with variable amount of preview for the non-chosen task stimuli (i.e., potential switch stimuli). We assumed that switch stimuli would initiate some pre-processing resulting in improved performance in switch trials. Results showed that reduced switch costs due to extra-preview in advance of each trial were accompanied by more task switches. This finding is in line with the characteristics of rational adaptive behavior. However, participants were not biased to switch tasks more often than chance despite large switch benefits. We suggest that participants might avoid effortful additional control processes that modulate the effects of preview on task performance and task choice.

Development of a banding database for North Pacific albatross: Implications for future data collection

USGS Publications Warehouse

Doherty, P.F.; Kendall, W.L.; Sillett, S.; Gustafson, M.; Flint, B.; Naughton, M.; Robbins, C.S.; Pyle, P.; Macintyre, Ian G.

2006-01-01

The effects of fishery practices on black-footed (Phoebastria nigripes) and Laysan albatross (Phoebastria immutabilis) continue to be a source of contention and uncertainty. Some of this uncertainty is a result of a lack of estimates of albatross demographic parameters such as survival. To begin to address these informational needs, a database of albatross banding and encounter records was constructed. Due to uncertainty concerning data collection and validity of assumptions required for mark-recapture analyses, these data should be used with caution. Although demographic parameter estimates are of interest to many, band loss rates, temporary emigration rates, and discontinuous banding effort can confound these estimates. We suggest a number of improvements in data collection that can help ameliorate problems, including the use of double banding and collecting data using a `robust? design. Additionally, sustained banding and encounter efforts are needed to maximize the value of these data. With these modifications, the usefulness of the banding data could be improved markedly.

Energy Efficient Engine (E3) combustion system component technology performance report

NASA Technical Reports Server (NTRS)

Burrus, D. L.; Chahrour, C. A.; Foltz, H. L.; Sabla, P. E.; Seto, S. P.; Taylor, J. R.

1984-01-01

The Energy Efficient Engine (E3) combustor effort was conducted as part of the overall NASA/GE E3 Program. This effort included the selection of an advanced double-annular combustion system design. The primary intent of this effort was to evolve a design that meets the stringent emissions and life goals of the E3, as well as all of the usual performance requirements of combustion systems for modern turbofan engines. Numerous detailed design studies were conducted to define the features of the combustion system design. Development test hardware was fabricated, and an extensive testing effort was undertaken to evaluate the combustion system subcomponents in order to verify and refine the design. Technology derived from this effort was incorporated into the engine combustion hardware design. The advanced engine combustion system was then evaluated in component testing to verify the design intent. What evolved from this effort was an advanced combustion system capable of satisfying all of the combustion system design objectives and requirements of the E3.

Flight program language requirements. Volume 2: Requirements and evaluations

NASA Technical Reports Server (NTRS)

1972-01-01

The efforts and results are summarized for a study to establish requirements for a flight programming language for future onboard computer applications. Several different languages were available as potential candidates for future NASA flight programming efforts. The study centered around an evaluation of the four most pertinent existing aerospace languages. Evaluation criteria were established, and selected kernels from the current Saturn 5 and Skylab flight programs were used as benchmark problems for sample coding. An independent review of the language specifications incorporated anticipated future programming requirements into the evaluation. A set of detailed language requirements was synthesized from these activities. The details of program language requirements and of the language evaluations are described.

Effort-related functions of nucleus accumbens dopamine and associated forebrain circuits.

PubMed

Salamone, J D; Correa, M; Farrar, A; Mingote, S M

2007-04-01

Over the last several years, it has become apparent that there are critical problems with the hypothesis that brain dopamine (DA) systems, particularly in the nucleus accumbens, directly mediate the rewarding or primary motivational characteristics of natural stimuli such as food. Hypotheses related to DA function are undergoing a substantial restructuring, such that the classic emphasis on hedonia and primary reward is giving way to diverse lines of research that focus on aspects of instrumental learning, reward prediction, incentive motivation, and behavioral activation. The present review discusses dopaminergic involvement in behavioral activation and, in particular, emphasizes the effort-related functions of nucleus accumbens DA and associated forebrain circuitry. The effects of accumbens DA depletions on food-seeking behavior are critically dependent upon the work requirements of the task. Lever pressing schedules that have minimal work requirements are largely unaffected by accumbens DA depletions, whereas reinforcement schedules that have high work (e.g., ratio) requirements are substantially impaired by accumbens DA depletions. Moreover, interference with accumbens DA transmission exerts a powerful influence over effort-related decision making. Rats with accumbens DA depletions reallocate their instrumental behavior away from food-reinforced tasks that have high response requirements, and instead, these rats select a less-effortful type of food-seeking behavior. Along with prefrontal cortex and the amygdala, nucleus accumbens is a component of the brain circuitry regulating effort-related functions. Studies of the brain systems regulating effort-based processes may have implications for understanding drug abuse, as well as energy-related disorders such as psychomotor slowing, fatigue, or anergia in depression.