32 CFR 230.4 - Policy.

Code of Federal Regulations, 2013 CFR

2013-07-01

... on DoD installations shall be provided logistic support as set forth in 32 CFR part 231. (6) Military... services (to include in-store banking) requiring the outgrant of additional space or logistical support...

34 CFR 74.30 - Purpose of property standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... project supported by a Federal award. Recipients shall observe these standards under awards. The Secretary does not impose additional requirements, unless specifically required by Federal statute. The recipient... INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements...

34 CFR 74.30 - Purpose of property standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... project supported by a Federal award. Recipients shall observe these standards under awards. The Secretary does not impose additional requirements, unless specifically required by Federal statute. The recipient... INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements...

34 CFR 74.30 - Purpose of property standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... project supported by a Federal award. Recipients shall observe these standards under awards. The Secretary does not impose additional requirements, unless specifically required by Federal statute. The recipient... INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements...

34 CFR 74.30 - Purpose of property standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... project supported by a Federal award. Recipients shall observe these standards under awards. The Secretary does not impose additional requirements, unless specifically required by Federal statute. The recipient... INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements...

34 CFR 74.30 - Purpose of property standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... project supported by a Federal award. Recipients shall observe these standards under awards. The Secretary does not impose additional requirements, unless specifically required by Federal statute. The recipient... INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements...

14 CFR § 1260.130 - Purpose of property standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... project supported by a Federal award. Recipients shall observe these standards under awards and NASA will not impose additional requirements, unless specifically required by Federal statute. The recipient may...

78 FR 76811 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-19

... support of the scholarship application by academic professors/advisors. NOAA OEd student scholar alumni... are required to update the student tracker database with the required student information. In addition...

User interface issues in supporting human-computer integrated scheduling

NASA Technical Reports Server (NTRS)

Cooper, Lynne P.; Biefeld, Eric W.

1991-01-01

Explored here is the user interface problems encountered with the Operations Missions Planner (OMP) project at the Jet Propulsion Laboratory (JPL). OMP uses a unique iterative approach to planning that places additional requirements on the user interface, particularly to support system development and maintenance. These requirements are necessary to support the concepts of heuristically controlled search, in-progress assessment, and iterative refinement of the schedule. The techniques used to address the OMP interface needs are given.

Factors Influencing Staff Perceptions of Administrator Support for Tier 2 and 3 Interventions: A Multilevel Perspective

ERIC Educational Resources Information Center

Debnam, Katrina J.; Pas, Elise T.; Bradshaw, Catherine P.

2013-01-01

Although the number of schools implementing School-Wide Positive Behavioral Interventions and Supports (SWPBIS) is increasing, and there is great demand for evidence-based Tier 2 and 3 interventions for students requiring additional support, little systematic research has examined administrator support for such programming. This article examines…

Mark IVA microprocessor support

NASA Technical Reports Server (NTRS)

Burford, A. L.

1982-01-01

The requirements and plans for the maintenance support of microprocessor-based controllers in the Deep Space Network Mark IVA System are discussed. Additional new interfaces and 16-bit processors have introduced problems not present in the Mark III System. The need for continuous training of maintenance personnel to maintain a level of expertise consistent with the sophistication of the required tools is also emphasized.

75 FR 57490 - Notice of Submission of Proposed Information Collection to OMB Section 202 Supportive Housing for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-21

... Proposed Information Collection to OMB Section 202 Supportive Housing for the Elderly Application... Elderly and addition of predevelopment grant funding for architectural and engineering work, site control... Proposal: Section 202 Supportive Housing for the Elderly Application Submission Requirements. OMB Approval...

Space station support of manned Mars missions

NASA Technical Reports Server (NTRS)

Holt, Alan C.

1986-01-01

The assembly of a manned Mars interplanetary spacecraft in low Earth orbit can be best accomplished with the support of the space station. Station payload requirements for microgravity environments of .001 g and pointing stability requirements of less than 1 arc second could mean that the spacecraft may have to be assembled at a station-keeping position about 100 meters or more away from the station. In addition to the assembly of large modules and connective structures, the manned Mars mission assembly tasks may include the connection of power, fluid, and data lines and the handling and activation of components for chemical or nuclear power and propulsion systems. These assembly tasks will require the use of advanced automation and robotics in addition to Orbital Maneuvering Vehicle and Extravehicular Activity (EVA) crew support. Advanced development programs for the space station, including on-orbit demonstrations, could also be used to support manned Mars mission technology objectives. Follow-on studies should be conducted to identify space station activities which could be enhanced or expanded in scope (without significant cost and schedule impact) to help resolve key technical and scientific questions relating to manned Mars missions.

High performance flight computer developed for deep space applications

NASA Technical Reports Server (NTRS)

Bunker, Robert L.

1993-01-01

The development of an advanced space flight computer for real time embedded deep space applications which embodies the lessons learned on Galileo and modern computer technology is described. The requirements are listed and the design implementation that meets those requirements is described. The development of SPACE-16 (Spaceborne Advanced Computing Engine) (where 16 designates the databus width) was initiated to support the MM2 (Marine Mark 2) project. The computer is based on a radiation hardened emulation of a modern 32 bit microprocessor and its family of support devices including a high performance floating point accelerator. Additional custom devices which include a coprocessor to improve input/output capabilities, a memory interface chip, and an additional support chip that provide management of all fault tolerant features, are described. Detailed supporting analyses and rationale which justifies specific design and architectural decisions are provided. The six chip types were designed and fabricated. Testing and evaluation of a brass/board was initiated.

Deer Island Aquatic Ecosystem Restoration Project

DTIC Science & Technology

2015-07-01

across the U.S. Army Corps of Engineers (USACE) requires that a broad base of EWN understanding and support be built . The Deer Island Aquatic...USACE) requires that a broad base of EWN understanding and support be built . The Deer Island Aquatic Ecosystem Restoration Project (Deer Island AERP...Mississippi Wetlands Restoration Projects). The project received additional funding through several public laws in response to hurricane damages

An integrated decision support system for diagnosing and managing patients with community-acquired pneumonia.

PubMed Central

Aronsky, D.; Haug, P. J.

1999-01-01

Decision support systems that integrate guidelines have become popular applications to reduce variation and deliver cost-effective care. However, adverse characteristics of decision support systems, such as additional and time-consuming data entry or manually identifying eligible patients, result in a "behavioral bottleneck" that prevents decision support systems to become part of the clinical routine. This paper describes the design and the implementation of an integrated decision support system that explores a novel approach for bypassing the behavioral bottleneck. The real-time decision support system does not require health care providers to enter additional data and consists of a diagnostic and a management component. Images Fig. 1 Fig. 2 Fig. 3 PMID:10566348

76 FR 5537 - Electronic On-Board Recorders and Hours of Service Supporting Documents

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-01

...The Federal Motor Carrier Safety Administration (FMCSA) proposes to amend the Federal Motor Carrier Safety Regulations (FMCSRs) to require certain motor carriers operating commercial motor vehicles (CMVs) in interstate commerce to use electronic on-board recorders (EOBRs) to document their drivers' hours of service (HOS). Under this proposal, all motor carriers currently required to maintain Records of Duty Status (RODS) for HOS recordkeeping would be required to use EOBRs to systematically and effectively monitor their drivers' compliance with HOS requirements. Additionally, this proposal sets forth the supporting documents that all motor carriers currently required to use RODS would still be required to obtain and keep, as required by section 113(a) of the Hazardous Materials Transportation Authorization Act (HMTAA). It explains, however, that although motor carriers subject to the proposed EOBR requirements would still need to retain some supporting documents, they would be relieved of the requirements to retain supporting documents to verify driving time. FMCSA also proposes to require all motor carriers--both RODS and timecard users--to systematically monitor their drivers' compliance with HOS requirements. Motor carriers would be given 3 years after the effective date of the final rule to comply with these requirements.

Advanced life support study

NASA Technical Reports Server (NTRS)

1991-01-01

Summary reports on each of the eight tasks undertaken by this contract are given. Discussed here is an evaluation of a Closed Ecological Life Support System (CELSS), including modeling and analysis of Physical/Chemical Closed Loop Life Support (P/C CLLS); the Environmental Control and Life Support Systems (ECLSS) evolution - Intermodule Ventilation study; advanced technologies interface requirements relative to ECLSS; an ECLSS resupply analysis; the ECLSS module addition relocation systems engineering analysis; an ECLSS cost/benefit analysis to identify rack-level interface requirements of the alternate technologies evaluated in the ventilation study, with a comparison of these with the rack level interface requirements for the baseline technologies; advanced instrumentation - technology database enhancement; and a clean room survey and assessment of various ECLSS evaluation options for different growth scenarios.

78 FR 57585 - Minimum Training Requirements for Entry-Level Commercial Motor Vehicle Operators

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-19

... specific minimum number of training hours. Instead, these commenters support a performance-based approach... support a minimum hours-based approach to training. They stated that FMCSA must specify the minimum number...\\ Additionally, some supporters of an hours-based training approach believed that the Agency's proposal did not...

Generic waste management requirements for a controlled ecological life support system /CELSS/

NASA Technical Reports Server (NTRS)

Hoshizaki, T.; Hansen, B. D., III

1981-01-01

Regenerative life support systems for future space missions will require closure of the waste-food loop. Each mission application will generate specific requirements for the waste management system. However, there are generic input and output requirements that can be identified when a probable scenario is chosen. This paper discusses the generic requirements when higher plants are chosen as the primary food source. Attention is focused on the quality and quantity of nutrients necessary for culturing higher plants. The types of wastes to be processed are also discussed. In addition, requirements generated by growing plants on three different substrates are presented. This work suggests that the mineral composition of waste materials may require minimal adjustment to satisfy the plant requirements.

Study of a tracking and data acquisition system for the 1990's. Volume 3: TDAS Communication Mission Model

NASA Technical Reports Server (NTRS)

Mccreary, T.

1983-01-01

A parametric description of the communication channels required between the user spacecraft to be supported and the user ground data systems is developed. Scenarios of mission models, which reflect a range of free flyers vs space platform usage as well as levels of NASA activity and potential support for military missions, and potential channel requirements which identify: (1) bounds on TDAS forward and return link data communication demand, and (2) the additional demand for providing navigation/tracking support are covered.

Extending enterprise architecture modelling with business goals and requirements

NASA Astrophysics Data System (ADS)

Engelsman, Wilco; Quartel, Dick; Jonkers, Henk; van Sinderen, Marten

2011-02-01

The methods for enterprise architecture (EA), such as The Open Group Architecture Framework, acknowledge the importance of requirements modelling in the development of EAs. Modelling support is needed to specify, document, communicate and reason about goals and requirements. The current modelling techniques for EA focus on the products, services, processes and applications of an enterprise. In addition, techniques may be provided to describe structured requirements lists and use cases. Little support is available however for modelling the underlying motivation of EAs in terms of stakeholder concerns and the high-level goals that address these concerns. This article describes a language that supports the modelling of this motivation. The definition of the language is based on existing work on high-level goal and requirements modelling and is aligned with an existing standard for enterprise modelling: the ArchiMate language. Furthermore, the article illustrates how EA can benefit from analysis techniques from the requirements engineering domain.

Automata learning algorithms and processes for providing more complete systems requirements specification by scenario generation, CSP-based syntax-oriented model construction, and R2D2C system requirements transformation

NASA Technical Reports Server (NTRS)

Margaria, Tiziana (Inventor); Hinchey, Michael G. (Inventor); Rouff, Christopher A. (Inventor); Rash, James L. (Inventor); Steffen, Bernard (Inventor)

2010-01-01

Systems, methods and apparatus are provided through which in some embodiments, automata learning algorithms and techniques are implemented to generate a more complete set of scenarios for requirements based programming. More specifically, a CSP-based, syntax-oriented model construction, which requires the support of a theorem prover, is complemented by model extrapolation, via automata learning. This may support the systematic completion of the requirements, the nature of the requirement being partial, which provides focus on the most prominent scenarios. This may generalize requirement skeletons by extrapolation and may indicate by way of automatically generated traces where the requirement specification is too loose and additional information is required.

Industry-Supported Team Students' Projects.

ERIC Educational Resources Information Center

Glozman, Vladimir

The industry-supported team students' project enhances professional, intellectual, and personal development of students while addressing the needs of local industry. In addition to achieving academic excellence, the students are exposed to industry requirements, and excel in effective oral communication and cooperative teamwork. The teamwork…

Laser-Assisted Wire Additive Manufacturing System for the Deep Space Gateway

NASA Astrophysics Data System (ADS)

Foster, B. D.; Matthews, B.

2018-02-01

Investigation on the Deep Space Gateway will involve experiments/operations inside pressurized modules. Support for those experiments may necessitate a means to fabricate and repair required articles. This capability can be provided through an additive manufacturing (AM) system.

Design and Application of the Exploration Maintainability Analysis Tool

NASA Technical Reports Server (NTRS)

Stromgren, Chel; Terry, Michelle; Crillo, William; Goodliff, Kandyce; Maxwell, Andrew

2012-01-01

Conducting human exploration missions beyond Low Earth Orbit (LEO) will present unique challenges in the areas of supportability and maintainability. The durations of proposed missions can be relatively long and re-supply of logistics, including maintenance and repair items, will be limited or non-existent. In addition, mass and volume constraints in the transportation system will limit the total amount of logistics that can be flown along with the crew. These constraints will require that new strategies be developed with regards to how spacecraft systems are designed and maintained. NASA is currently developing Design Reference Missions (DRMs) as an initial step in defining future human missions. These DRMs establish destinations and concepts of operation for future missions, and begin to define technology and capability requirements. Because of the unique supportability challenges, historical supportability data and models are not directly applicable for establishing requirements for beyond LEO missions. However, supportability requirements could have a major impact on the development of the DRMs. The mass, volume, and crew resources required to support the mission could all be first order drivers in the design of missions, elements, and operations. Therefore, there is a need for enhanced analysis capabilities to more accurately establish mass, volume, and time requirements for supporting beyond LEO missions. Additionally, as new technologies and operations are proposed to reduce these requirements, it is necessary to have accurate tools to evaluate the efficacy of those approaches. In order to improve the analysis of supportability requirements for beyond LEO missions, the Space Missions Analysis Branch at the NASA Langley Research Center is developing the Exploration Maintainability Analysis Tool (EMAT). This tool is a probabilistic simulator that evaluates the need for repair and maintenance activities during space missions and the logistics and crew requirements to support those activities. Using a Monte Carlo approach, the tool simulates potential failures in defined systems, based on established component reliabilities, and then evaluates the capability of the crew to repair those failures given a defined store of spares and maintenance items. Statistical analysis of Monte Carlo runs provides probabilistic estimates of overall mission safety and reliability. This paper will describe the operation of the EMAT, including historical data sources used to populate the model, simulation processes, and outputs. Analysis results are provided for a candidate exploration system, including baseline estimates of required sparing mass and volume. Sensitivity analysis regarding the effectiveness of proposed strategies to reduce mass and volume requirements and improve mission reliability is included in these results.

The work of the European Union Reference Laboratory for Food Additives (EURL) and its support for the authorisation process of feed additives in the European Union: a review

PubMed Central

von Holst, Christoph; Robouch, Piotr; Bellorini, Stefano; de la Huebra, María José González; Ezerskis, Zigmas

2016-01-01

ABSTRACT This paper describes the operation of the European Union Reference Laboratory for Feed Additives (EURL) and its role in the authorisation procedure of feed additives in the European Union. Feed additives are authorised according to Regulation (EC) No. 1831/2003, which introduced a completely revised authorisation procedure and also established the EURL. The regulations authorising feed additives contain conditions of use such as legal limits of the feed additives, which require the availability of a suitable method of analysis for official control purposes under real world conditions. It is the task of the EURL to evaluate the suitability of analytical methods as proposed by the industry for this purpose. Moreover, the paper shows that one of the major challenges is the huge variety of the methodology applied in feed additive analysis, thus requiring expertise in quite different analytical areas. In order to cope with this challenge, the EURL is supported by a network of national reference laboratories (NRLs) and only the merged knowledge of all NRLs allows for a scientifically sound assessment of the analytical methods. PMID:26540604

76 FR 45542 - Procurement List; Proposed Addition

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-29

... Feeding and Cleaning. NPA: NewView Oklahoma, Inc., Oklahoma City, OK. Contracting Activity: Defense Logistics Agency Troop Support, Philadelphia, PA. Coverage: C-List for 100% of the requirement of the Department of Defense, as aggregated by the Defense Logistics Agency Troop Support, Philadelphia, PA. Barry S...

Structured representation for requirements and specifications

NASA Technical Reports Server (NTRS)

Cohen, Gerald C.; Fisher, Gene; Frincke, Deborah; Wolber, Dave

1991-01-01

This document was generated in support of NASA contract NAS1-18586, Design and Validation of Digital Flight Control Systems suitable for Fly-By-Wire Applications, Task Assignment 2. Task 2 is associated with a formal representation of requirements and specifications. In particular, this document contains results associated with the development of a Wide-Spectrum Requirements Specification Language (WSRSL) that can be used to express system requirements and specifications in both stylized and formal forms. Included with this development are prototype tools to support the specification language. In addition a preliminary requirements specification methodology based on the WSRSL has been developed. Lastly, the methodology has been applied to an Advanced Subsonic Civil Transport Flight Control System.

29 CFR 95.30 - Purpose of property standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... whose cost was charged to a project supported by a Federal award. Recipients are required to observe these standards under awards and no additional requirements shall be imposed, unless specifically..., ORGANIZATIONS UNDER THE JURISDICTION OF FOREIGN GOVERNMENTS, AND INTERNATIONAL ORGANIZATIONS Post-Award...

29 CFR 95.30 - Purpose of property standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... whose cost was charged to a project supported by a Federal award. Recipients are required to observe these standards under awards and no additional requirements shall be imposed, unless specifically..., ORGANIZATIONS UNDER THE JURISDICTION OF FOREIGN GOVERNMENTS, AND INTERNATIONAL ORGANIZATIONS Post-Award...

29 CFR 95.30 - Purpose of property standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... whose cost was charged to a project supported by a Federal award. Recipients are required to observe these standards under awards and no additional requirements shall be imposed, unless specifically..., ORGANIZATIONS UNDER THE JURISDICTION OF FOREIGN GOVERNMENTS, AND INTERNATIONAL ORGANIZATIONS Post-Award...

29 CFR 95.30 - Purpose of property standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... whose cost was charged to a project supported by a Federal award. Recipients are required to observe these standards under awards and no additional requirements shall be imposed, unless specifically..., ORGANIZATIONS UNDER THE JURISDICTION OF FOREIGN GOVERNMENTS, AND INTERNATIONAL ORGANIZATIONS Post-Award...

29 CFR 95.30 - Purpose of property standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... whose cost was charged to a project supported by a Federal award. Recipients are required to observe these standards under awards and no additional requirements shall be imposed, unless specifically..., ORGANIZATIONS UNDER THE JURISDICTION OF FOREIGN GOVERNMENTS, AND INTERNATIONAL ORGANIZATIONS Post-Award...

13 CFR 303.9 - Requirements for short-term Planning Investments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Planning Investments. 303.9 Section 303.9 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION, DEPARTMENT OF COMMERCE PLANNING INVESTMENTS AND COMPREHENSIVE ECONOMIC DEVELOPMENT STRATEGIES § 303.9 Requirements for short-term Planning Investments. (a) In addition to providing support for CEDS...

Energy Requirements in Critically Ill Patients.

PubMed

Ndahimana, Didace; Kim, Eun-Kyung

2018-04-01

During the management of critical illness, optimal nutritional support is an important key for achieving positive clinical outcomes. Compared to healthy people, critically ill patients have higher energy expenditure, thereby their energy requirements and risk of malnutrition being increased. Assessing individual nutritional requirement is essential for a successful nutritional support, including the adequate energy supply. Methods to assess energy requirements include indirect calorimetry (IC) which is considered as a reference method, and the predictive equations which are commonly used due to the difficulty of using IC in certain conditions. In this study, a literature review was conducted on the energy metabolic changes in critically ill patients, and the implications for the estimation of energy requirements in this population. In addition, the issue of optimal caloric goal during nutrition support is discussed, as well as the accuracy of selected resting energy expenditure predictive equations, commonly used in critically ill patients.

Advanced user support programme—TEMPUS IML-2

NASA Astrophysics Data System (ADS)

Diefenbach, A.; Kratz, M.; Uffelmann, D.; Willnecker, R.

1995-05-01

The DLR Microgravity User Support Centre (MUSC) in Cologne has supported microgravity experiments in the field of materials and life sciences since 1979. In the beginning of user support activities, MUSC tasks comprised the basic ground and mission support, whereas present programmes are expanded on, for example, powerful telescience and advanced real time data acquisition capabilities for efficient experiment operation and monitoring. In view of the Space Station era, user support functions will increase further. Additional tasks and growing responsibilities must be covered, e.g. extended science support as well as experiment and facility operations. The user support for TEMPUS IML-2, under contract of the German Space Agency DARA, represents a further step towards the required new-generation of future ground programme. TEMPUS is a new highly sophisticated Spacelab multi-user facility for containerless processing of metallic samples. Electromagnetic levitation technique is applied and various experiment diagnosis tools are offered. Experiments from eight U.S. and German investigator groups have been selected for flight on the second International Microgravity Laboratory Mission IML-2 in 1994. Based on the experience gained in the research programme of the DLR Institute for Space Simulation since 1984, MUSC is performing a comprehensive experiment preparation programme in close collaboration with the investigator teams. Complex laboratory equipment has been built up for technology and experiment preparation development. New experiment techniques have been developed for experiment verification tests. The MUSC programme includes thorough analysis and testing of scientific requirements of every proposed experiment with respect to the facility hard- and software capabilities. In addition, studies on the experiment-specific operation requirements have been performed and suitable telescience scenarios were analysed. The present paper will give a survey of the TEMPUS user support tasks emphasizing the advanced science support activities, which are considered significant for future ground programmes.

NREL Software Aids Offshore Wind Turbine Designs (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2013-10-01

NREL researchers are supporting offshore wind power development with computer models that allow detailed analyses of both fixed and floating offshore wind turbines. While existing computer-aided engineering (CAE) models can simulate the conditions and stresses that a land-based wind turbine experiences over its lifetime, offshore turbines require the additional considerations of variations in water depth, soil type, and wind and wave severity, which also necessitate the use of a variety of support-structure types. NREL's core wind CAE tool, FAST, models the additional effects of incident waves, sea currents, and the foundation dynamics of the support structures.

Factors associated with successful transition among children with disabilities in eight European countries

PubMed Central

2017-01-01

Introduction This research paper aims to assess factors reported by parents associated with the successful transition of children with complex additional support requirements that have undergone a transition between school environments from 8 European Union member states. Methods Quantitative data were collected from 306 parents within education systems from 8 EU member states (Bulgaria, Cyprus, Greece, Ireland, the Netherlands, Romania, Spain and the UK). The data were derived from an online questionnaire and consisted of 41 questions. Information was collected on: parental involvement in their child’s transition, child involvement in transition, child autonomy, school ethos, professionals’ involvement in transition and integrated working, such as, joint assessment, cooperation and coordination between agencies. Survey questions that were designed on a Likert-scale were included in the Principal Components Analysis (PCA), additional survey questions, along with the results from the PCA, were used to build a logistic regression model. Results Four principal components were identified accounting for 48.86% of the variability in the data. Principal component 1 (PC1), ‘child inclusive ethos,’ contains 16.17% of the variation. Principal component 2 (PC2), which represents child autonomy and involvement, is responsible for 8.52% of the total variation. Principal component 3 (PC3) contains questions relating to parental involvement and contributed to 12.26% of the overall variation. Principal component 4 (PC4), which involves transition planning and coordination, contributed to 11.91% of the overall variation. Finally, the principal components were included in a logistic regression to evaluate the relationship between inclusion and a successful transition, as well as whether other factors that may have influenced transition. All four principal components were significantly associated with a successful transition, with PC1 being having the most effect (OR: 4.04, CI: 2.43–7.18, p<0.0001). Discussion To support a child with complex additional support requirements through transition from special school to mainstream, governments and professionals need to ensure children with additional support requirements and their parents are at the centre of all decisions that affect them. It is important that professionals recognise the educational, psychological, social and cultural contexts of a child with additional support requirements and their families which will provide a holistic approach and remove barriers for learning. PMID:28636649

Factors associated with successful transition among children with disabilities in eight European countries.

PubMed

Ravenscroft, John; Wazny, Kerri; Davis, John M

2017-01-01

This research paper aims to assess factors reported by parents associated with the successful transition of children with complex additional support requirements that have undergone a transition between school environments from 8 European Union member states. Quantitative data were collected from 306 parents within education systems from 8 EU member states (Bulgaria, Cyprus, Greece, Ireland, the Netherlands, Romania, Spain and the UK). The data were derived from an online questionnaire and consisted of 41 questions. Information was collected on: parental involvement in their child's transition, child involvement in transition, child autonomy, school ethos, professionals' involvement in transition and integrated working, such as, joint assessment, cooperation and coordination between agencies. Survey questions that were designed on a Likert-scale were included in the Principal Components Analysis (PCA), additional survey questions, along with the results from the PCA, were used to build a logistic regression model. Four principal components were identified accounting for 48.86% of the variability in the data. Principal component 1 (PC1), 'child inclusive ethos,' contains 16.17% of the variation. Principal component 2 (PC2), which represents child autonomy and involvement, is responsible for 8.52% of the total variation. Principal component 3 (PC3) contains questions relating to parental involvement and contributed to 12.26% of the overall variation. Principal component 4 (PC4), which involves transition planning and coordination, contributed to 11.91% of the overall variation. Finally, the principal components were included in a logistic regression to evaluate the relationship between inclusion and a successful transition, as well as whether other factors that may have influenced transition. All four principal components were significantly associated with a successful transition, with PC1 being having the most effect (OR: 4.04, CI: 2.43-7.18, p<0.0001). To support a child with complex additional support requirements through transition from special school to mainstream, governments and professionals need to ensure children with additional support requirements and their parents are at the centre of all decisions that affect them. It is important that professionals recognise the educational, psychological, social and cultural contexts of a child with additional support requirements and their families which will provide a holistic approach and remove barriers for learning.

Foreign Security Force Advisor Training, Doctrine, and Manning for 2015 and Beyond

DTIC Science & Technology

2016-03-01

training is required prior to additional deployments. Additionally , once enough survey data is gathered, the MCSCG could request another thesis student...better support the continued improvement in training and certification of teams prior to deployment. Additionally , the research found that the total...improvement in training and certification of teams prior to deployment. Additionally , the research found that the total compensation for one training

Structural technology challenges for evolutionary growth of Space Station Freedom

NASA Technical Reports Server (NTRS)

Doiron, Harold H.

1990-01-01

A proposed evolutionary growth scenario for Space Station Freedom was defined recently by a NASA task force created to study requirements for a Human Exploration Initiative. The study was an initial response to President Bush's July 20, 1989 proposal to begin a long range program of human exploration of space including a permanently manned lunar base and a manned mission to Mars. This growth scenario evolves Freedom into a critical transportation node to support lunar and Mars missions. The growth scenario begins with the Assembly Complete configuration and adds structure, power, and facilities to support a Lunar Transfer Vehicle (LTV) verification flight. Evolutionary growth continues to support expendable, then reusable LTV operations, and finally, LTV and Mars Transfer Vehicle (MTV) operations. The significant structural growth and additional operations creating new loading conditions will present new technological and structural design challenges in addition to the considerable technology requirements of the baseline Space Station Freedom program. Several structural design and technology issues of the baseline program are reviewed and related technology development required by the growth scenario is identified.

New law requires 'medically accurate' lesson plans.

PubMed

1999-09-17

The California Legislature has passed a bill requiring all textbooks and materials used to teach about AIDS be medically accurate and objective. Statements made within the curriculum must be supported by research conducted in compliance with scientific methods, and published in peer-reviewed journals. Some of the current lesson plans were found to contain scientifically unsupported and biased information. In addition, the bill requires material to be "free of racial, ethnic, or gender biases." The legislation is supported by a wide range of interests, but opposed by the California Right to Life Education Fund, because they believe it discredits abstinence-only material.

Geometry and Grid Modeling for Numerical Simulation

DTIC Science & Technology

2005-06-01

which makes them particularly vexing to beginners . In addition, they are expensive in terms of memory requirements and compile times. 3.1.4 TSTT The...F77, Python , or Fortran90 (beta). It supports drivers written in C, C++, F77, Python , Java or Fortran90 (beta). It is supported currently on

32 CFR 231.10 - Financial institutions on DoD installations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... installations shall be provided logistic support as set forth in subpart A of this part. (vi) Military... financial services (to include in-store banking) requiring the outgrant of additional space or logistical... Logistics) (USD(AT&L)) shall monitor policies and procedures governing logistical support furnished to...

32 CFR 231.10 - Financial institutions on DoD installations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... installations shall be provided logistic support as set forth in subpart A of this part. (vi) Military... financial services (to include in-store banking) requiring the outgrant of additional space or logistical... Logistics) (USD(AT&L)) shall monitor policies and procedures governing logistical support furnished to...

32 CFR 231.10 - Financial institutions on DoD installations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... installations shall be provided logistic support as set forth in subpart A of this part. (vi) Military... financial services (to include in-store banking) requiring the outgrant of additional space or logistical... Logistics) (USD(AT&L)) shall monitor policies and procedures governing logistical support furnished to...

Teacher-Education Student Perceptions for Stages of Concern Related to Integrating Technology

ERIC Educational Resources Information Center

Quadrini, Virginia Horak

2013-01-01

In this study, research includes support for technology integration in the classroom. The National Education Technology Plan Summary (2010) included research to support the requirement of teachers to integrate technology into instruction. Teacher-education student programs need to include additional training for integrating technology into…

Vehicle Health Management Communications Requirements for AeroMACS

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.; Clements, Donna J.; Apaza, Rafael D.

2012-01-01

As the development of standards for the aeronautical mobile airport communications system (AeroMACS) progresses, the process of identifying and quantifying appropriate uses for the system is progressing. In addition to defining important elements of AeroMACS standards, indentifying the systems uses impacts AeroMACS bandwidth requirements. Although an initial 59 MHz spectrum allocation for AeroMACS was established in 2007, the allocation may be inadequate; studies have indicated that 100 MHz or more of spectrum may be required to support airport surface communications. Hence additional spectrum allocations have been proposed. Vehicle health management (VHM) systems, which can produce large volumes of vehicle health data, were not considered in the original bandwidth requirements analyses, and are therefore of interest in supporting proposals for additional AeroMACS spectrum. VHM systems are an emerging development in air vehicle safety, and preliminary estimates of the amount of data that will be produced and transmitted off an aircraft, both in flight and on the ground, have been prepared based on estimates of data produced by on-board vehicle health sensors and initial concepts of data processing approaches. This allowed an initial estimate of VHM data transmission requirements for the airport surface. More recently, vehicle-level systems designed to process and analyze VHM data and draw conclusions on the current state of vehicle health have been undergoing testing and evaluation. These systems make use of vehicle system data that is mostly different from VHM data considered previously for airport surface transmission, and produce processed system outputs that will be also need to be archived, thus generating additional data load for AeroMACS. This paper provides an analysis of airport surface data transmission requirements resulting from the vehicle level reasoning systems, within the context of overall VHM data requirements.

Ahead of the Times in Murfreesboro.

ERIC Educational Resources Information Center

Jones, John Hodge

1994-01-01

Murfreesboro (Tennessee) City Schools extended the school day and year with no additional cost to taxpayers. Implementation was arduous and faced great resistance. Eventual solution made better use of the school system's capital assets and human resources, rearranged Chapter 1 money, required additional business support and parents' willingness to…

Pratt & Whitney ESCORT derivative for mars surface power

NASA Astrophysics Data System (ADS)

Feller, Gerald J.; Joyner, Russell

1999-01-01

The purpose of this paper is to address the applicability of a common reactor system design from the Pratt & Whitney ESCORT nuclear thermal rocket engine concept to support current NASA mars surface-based power requirements. The ESCORT is a bimodal engine capable of supporting a wide range of propulsive thermal and vehicle electrical power requirements. The ESCORT engine is powered by a fast-spectrum beryllium-reflected CERMET-fueled nuclear reactor. In addition to an expander cycle propulsive mode, the ESCORT is capable of operating in an electrical power mode. In this mode, the reactor is used to heat a mixture of helium and xenon to drive a closed-loop Brayton cycle in order to generate electrical energy. Recent Design Reference Mission requirements (DRM) from NASA Johnson Space Center and NASA Lewis Research Center studies in 1997 and 1998 have detailed upgraded requirements for potential mars transfer missions. The current NASA DRM requires a nuclear thermal propulsion system capable of delivering total mission requirements of 200170 N (45000 lbf) thrust and 50 kWe of spacecraft electrical power. Additionally, these requirements detailed a surface power system capable of providing approximately 160 kW of electrical energy over an approximate 10 year period within a given weight and volume envelope. Current NASA studies use a SP-100 reactor (0.8 MT) and a NERVA derivative (1.6 MT) as baseline systems. A mobile power cart of approximate dimensions 1.7 m×4.5 m×4.4 m has been conceptualized to transport the reactor power system on the Mars Surface. The 63.25 cm diameter and 80.25 cm height of the ESCORT and its 1.3 MT of weight fit well within the current weight and volume target range of the NASA DRM requirements. The modifications required to the ESCORT reactor system to support this upgraded electrical power requirements along with operation in the Martian atmospheric conditions are addressed in this paper. Sufficient excess reactivity and burnup capability were designed into the ESCORT reactor system to support these upgraded requirements. Only slight modifications to reactor hardware were required to address any environmental considerations. These modifications involved sealing any refractory metal alloy components from the CO2 in the Martian Atmosphere. Also, the Brayton cycle Power Conversion Unit (PCU) hardware was modified to support the upgraded requirements. This paper discusses the design analysis performed and provides information on the final common reactor concept to be used on the Mars surface to support manned missions.

Development Requirements for the Exploration PLSS (xPLSS) Carbon Dioxide and Humidity Control Unit (CDHCU)

NASA Technical Reports Server (NTRS)

Chullen, Cinda

2017-01-01

Functional Requirements for the Carbon Dioxide and Humidity Control Unit (CDHCU): The CDHCU is a component of the Exploration Portable Life Support System (xPLSS) to provide carbon dioxide (CO2) and humidity control within the spacesuit for a crewmember to perform extravehicular activities (EVA) in vacuum (micro-g), lunar, and Mars environments for up to 8 hours continuous, and during EVA preparation in airlocks or support vehicles for an additional 2 hours (TBR) continuous.

Air Force Institutional Requirements: Opportunities for Improving the Efficiency of Sourcing, Managing, and Manning Corporate Requirements

DTIC Science & Technology

prolonged undermanning. Most career field managers are unable to fully man their associated authorizations and are acutely aware of additional...IRs are valid, funded manpower requirements that do not align with a traditional, functional career field but are needed to support the Air Force...fill an IR position, though there are exceptions for some IR positions with unique educational or experiential requirements.

An aspect-oriented approach for designing safety-critical systems

NASA Astrophysics Data System (ADS)

Petrov, Z.; Zaykov, P. G.; Cardoso, J. P.; Coutinho, J. G. F.; Diniz, P. C.; Luk, W.

The development of avionics systems is typically a tedious and cumbersome process. In addition to the required functions, developers must consider various and often conflicting non-functional requirements such as safety, performance, and energy efficiency. Certainly, an integrated approach with a seamless design flow that is capable of requirements modelling and supporting refinement down to an actual implementation in a traceable way, may lead to a significant acceleration of development cycles. This paper presents an aspect-oriented approach supported by a tool chain that deals with functional and non-functional requirements in an integrated manner. It also discusses how the approach can be applied to development of safety-critical systems and provides experimental results.

46 CFR 54.30-15 - Requirement for analysis and computation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... PRESSURE VESSELS Mechanical Stress Relief § 54.30-15 Requirement for analysis and computation. (a) A stress... mechanical stress relief process. This analysis should include consideration of the local stresses in way of saddles or other supporting structure and additional bending stresses due to the weight of the...

High School Graduation Minimum Competency Requirements. Final Technical Report.

ERIC Educational Resources Information Center

Austin Independent School District, TX. Office of Research and Evaluation.

This technical report details the testing results and analyses supporting the evaluation findings related to the Austin (Texas) Independent School District (AISD) minimum competency graduation requirements. The graduation competency status of all AISD students in grades 8 to 12 are documented. The report provides additional information on the data…

46 CFR 54.30-15 - Requirement for analysis and computation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... PRESSURE VESSELS Mechanical Stress Relief § 54.30-15 Requirement for analysis and computation. (a) A stress... mechanical stress relief process. This analysis should include consideration of the local stresses in way of saddles or other supporting structure and additional bending stresses due to the weight of the...

46 CFR 54.30-15 - Requirement for analysis and computation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... PRESSURE VESSELS Mechanical Stress Relief § 54.30-15 Requirement for analysis and computation. (a) A stress... mechanical stress relief process. This analysis should include consideration of the local stresses in way of saddles or other supporting structure and additional bending stresses due to the weight of the...

46 CFR 54.30-15 - Requirement for analysis and computation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... PRESSURE VESSELS Mechanical Stress Relief § 54.30-15 Requirement for analysis and computation. (a) A stress... mechanical stress relief process. This analysis should include consideration of the local stresses in way of saddles or other supporting structure and additional bending stresses due to the weight of the...

78 FR 48417 - Proposed Information Collection; Comment Request; Educational Partnership Program (EPP), Ernest F...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-08

... support of the scholarship application by academic professors/advisors. NOAA OEd student scholar alumni... are required to update the student tracker database with the required student information. In addition... System database form, 17 hours; undergraduate application form, 8 hours; reference forms, 1 hour; alumni...

46 CFR 54.30-15 - Requirement for analysis and computation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... PRESSURE VESSELS Mechanical Stress Relief § 54.30-15 Requirement for analysis and computation. (a) A stress... mechanical stress relief process. This analysis should include consideration of the local stresses in way of saddles or other supporting structure and additional bending stresses due to the weight of the...

47 CFR 1.20007 - Additional assistance capability requirements for wireline, cellular, and PCS telecommunications...

Code of Federal Regulations, 2012 CFR

2012-10-01

... under surveillance maintain a circuit connection to the call. (4) Destination. A party or place to which... features to support lawfully authorized electronic surveillance, and specifies interfaces necessary to... provide to a LEA the assistance capability requirements regarding wire and electronic communications and...

47 CFR 1.20007 - Additional assistance capability requirements for wireline, cellular, and PCS telecommunications...

Code of Federal Regulations, 2013 CFR

2013-10-01

... under surveillance maintain a circuit connection to the call. (4) Destination. A party or place to which... features to support lawfully authorized electronic surveillance, and specifies interfaces necessary to... provide to a LEA the assistance capability requirements regarding wire and electronic communications and...

47 CFR 1.20007 - Additional assistance capability requirements for wireline, cellular, and PCS telecommunications...

Code of Federal Regulations, 2014 CFR

2014-10-01

... under surveillance maintain a circuit connection to the call. (4) Destination. A party or place to which... features to support lawfully authorized electronic surveillance, and specifies interfaces necessary to... provide to a LEA the assistance capability requirements regarding wire and electronic communications and...

Benchmarking DoD Use of Additive Manufacturing and Quantifying Costs

DTIC Science & Technology

2017-03-01

46 VI. Cost Benefit ...developing a cost model. The US Army Logistics Innovation Agency published a study called “Additive Manufacturing Cost - Benefit Analysis”. This...to over fifteen thousand dollars on GSA Advantage. Desktop printers do not require extensive support equipment. 47    VI. Cost Benefit

14 CFR 204.3 - Applicants for new certificate or commuter air carrier authority.

Code of Federal Regulations, 2014 CFR

2014-01-01

... authority shall file the data set forth in paragraphs (a) through (v) of this section. In addition, the Department may require an applicant to provide additional data if necessary to reach an informed judgment... OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS DATA TO SUPPORT FITNESS DETERMINATIONS...

14 CFR 204.3 - Applicants for new certificate or commuter air carrier authority.

Code of Federal Regulations, 2012 CFR

2012-01-01

... authority shall file the data set forth in paragraphs (a) through (v) of this section. In addition, the Department may require an applicant to provide additional data if necessary to reach an informed judgment... OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS DATA TO SUPPORT FITNESS DETERMINATIONS...

14 CFR 204.3 - Applicants for new certificate or commuter air carrier authority.

Code of Federal Regulations, 2011 CFR

2011-01-01

... authority shall file the data set forth in paragraphs (a) through (v) of this section. In addition, the Department may require an applicant to provide additional data if necessary to reach an informed judgment... OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS DATA TO SUPPORT FITNESS DETERMINATIONS...

14 CFR 204.3 - Applicants for new certificate or commuter air carrier authority.

Code of Federal Regulations, 2013 CFR

2013-01-01

... authority shall file the data set forth in paragraphs (a) through (v) of this section. In addition, the Department may require an applicant to provide additional data if necessary to reach an informed judgment... OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS DATA TO SUPPORT FITNESS DETERMINATIONS...

14 CFR 204.3 - Applicants for new certificate or commuter air carrier authority.

Code of Federal Regulations, 2010 CFR

2010-01-01

... authority shall file the data set forth in paragraphs (a) through (v) of this section. In addition, the Department may require an applicant to provide additional data if necessary to reach an informed judgment... OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS DATA TO SUPPORT FITNESS DETERMINATIONS...

How should support for climate-friendly technologies be designed?

PubMed

Fischer, Carolyn; Torvanger, Asbjørn; Shrivastava, Manish Kumar; Sterner, Thomas; Stigson, Peter

2012-01-01

Stabilizing global greenhouse gas concentrations at levels to avoid significant climate risks will require massive "decarbonization" of all the major economies over the next few decades, in addition to the reduced emissions from other GHGs and carbon sequestration. Achieving the necessary scale of emissions reductions will require a multifaceted policy effort to support a broad array of technological and behavioral changes. Change on this scale will require sound, well-thought-out strategies. In this article, we outline some core principles, drawn from recent social science research, for guiding the design of clean technology policies, with a focus on energy. The market should be encouraged to make good choices: pricing carbon emissions and other environmental damage, removing distorting subsidies and barriers to competition, and supporting RD&D broadly. More specific policies are required to address particular market failures and barriers. For those technologies identified as being particularly desirable, some narrower RD&D policies are available.

40 CFR 80.170 - Volumetric additive reconciliation (VAR), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., the preceding twelve months of VAR formula records plus the preceding two months of VAR supporting... request, the preceding two months of VAR formula records and VAR supporting documentation. (3) Facilities... accurately and separately measured, either through the use of a separate storage tank, a separate meter, or...

40 CFR 80.170 - Volumetric additive reconciliation (VAR), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., the preceding twelve months of VAR formula records plus the preceding two months of VAR supporting... request, the preceding two months of VAR formula records and VAR supporting documentation. (3) Facilities... accurately and separately measured, either through the use of a separate storage tank, a separate meter, or...

40 CFR 80.170 - Volumetric additive reconciliation (VAR), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., the preceding twelve months of VAR formula records plus the preceding two months of VAR supporting... request, the preceding two months of VAR formula records and VAR supporting documentation. (3) Facilities... accurately and separately measured, either through the use of a separate storage tank, a separate meter, or...

40 CFR 80.170 - Volumetric additive reconciliation (VAR), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., the preceding twelve months of VAR formula records plus the preceding two months of VAR supporting... request, the preceding two months of VAR formula records and VAR supporting documentation. (3) Facilities... accurately and separately measured, either through the use of a separate storage tank, a separate meter, or...

40 CFR 80.170 - Volumetric additive reconciliation (VAR), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., the preceding twelve months of VAR formula records plus the preceding two months of VAR supporting... request, the preceding two months of VAR formula records and VAR supporting documentation. (3) Facilities... accurately and separately measured, either through the use of a separate storage tank, a separate meter, or...

Comparing Design Constraints to Support Learning in Technology-Guided Inquiry Projects

ERIC Educational Resources Information Center

Applebaum, Lauren R.; Vitale, Jonathan M.; Gerard, Elizabeth; Linn, Marcia C.

2017-01-01

Physical design projects are a way to motivate and engage students in authentic science and engineering practices. Web-based tools can support design projects to ensure that students address and reflect upon critical science concepts during the course of the project. In addition, by specifying challenging design goals that require students to…

78 FR 12937 - Additional Safeguards for Children in Clinical Investigations of Food and Drug Administration...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... Act requires that all research involving children that is conducted, supported, or regulated by the... protections for children involved as subjects in research. FDA is taking this action both to comply with the... research involving children conducted, supported, or regulated by HHS be in compliance with HHS regulations...

Engineering and fabrication cost considerations for cryogenic wind tunnel models

NASA Technical Reports Server (NTRS)

Boykin, R. M., Jr.; Davenport, J. B., Jr.

1983-01-01

Design and fabrication cost drivers for cryogenic transonic wind tunnel models are defined. The major cost factors for wind tunnel models are model complexity, tolerances, surface finishes, materials, material validation, and model inspection. The cryogenic temperatures require the use of materials with relatively high fracture toughness but at the same time high strength. Some of these materials are very difficult to machine, requiring extensive machine hours which can add significantly to the manufacturing costs. Some additional engineering costs are incurred to certify the materials through mechanical tests and nondestructive evaluation techniques, which are not normally required with conventional models. When instrumentation such as accelerometers and electronically scanned pressure modules is required, temperature control of these devices needs to be incorporated into the design, which requires added effort. Additional thermal analyses and subsystem tests may be necessary, which also adds to the design costs. The largest driver to the design costs is potentially the additional static and dynamic analyses required to insure structural integrity of the model and support system.

Supportability for Beyond Low Earth Orbit Missions

NASA Technical Reports Server (NTRS)

Crillo, William M.; Goodliff, Kandyce E.; Aaseng, Gordon; Stromgren, Chel; Maxwell, Andrew J.

2011-01-01

Exploration beyond Low Earth Orbit (LEO) presents many unique challenges that will require changes from current Supportability approaches. Currently, the International Space Station (ISS) is supported and maintained through a series of preplanned resupply flights, on which spare parts, including some large, heavy Orbital Replacement Units (ORUs), are delivered to the ISS. The Space Shuttle system provided for a robust capability to return failed components to Earth for detailed examination and potential repair. Additionally, as components fail and spares are not already on-orbit, there is flexibility in the transportation system to deliver those required replacement parts to ISS on a near term basis. A similar concept of operation will not be feasible for beyond LEO exploration. The mass and volume constraints of the transportation system and long envisioned mission durations could make it difficult to manifest necessary spares. The supply of on-demand spare parts for missions beyond LEO will be very limited or even non-existent. In addition, the remote nature of the mission, the design of the spacecraft, and the limitations on crew capabilities will all make it more difficult to maintain the spacecraft. Alternate concepts of operation must be explored in which required spare parts, materials, and tools are made available to make repairs; the locations of the failures are accessible; and the information needed to conduct repairs is available to the crew. In this paper, ISS heritage information is presented along with a summary of the challenges of beyond LEO missions. A number of Supportability issues are discussed in relation to human exploration beyond LEO. In addition, the impacts of various Supportability strategies will be discussed. Any measure that can be incorporated to reduce risk and improve mission success should be evaluated to understand the advantages and disadvantages of implementing those measures. Finally, an effort to model and evaluate Supportability for beyond LEO missions will be described.

Information systems requirements for the Microgravity Science and Applications Program

NASA Technical Reports Server (NTRS)

Kicza, M. E.; Kreer, J. R.

1991-01-01

NASA's Microgravity Science and Applications (MSAD) Program is presented. Additionally, the types of information produced wiithin the program and the anticipated growth in information system requirements as the program transitions to Space Station Freedom utilization are discussed. Plans for payload operations support in the Freedom era are addressed, as well as current activities to define research community requirements for data and sample archives.

Information systems requirements for the microgravity science and applications program

NASA Technical Reports Server (NTRS)

Kicza, M. E.; Kreer, J. R.

1990-01-01

NASA's Microgravity Science and Applications (MSAD) Program is presented. Additionally, the types of information produced within the program and the anticipated growth in information system requirements as the program transitions to Space Station Freedom utilization are discussed. Plans for payload operations support in the Freedom era are addressed, as well as current activities to define research community requirements for data and sample archives.

The Future of the U.S. Workforce: The Limited Career Prospects for High School Graduates without Additional Education and Training

ERIC Educational Resources Information Center

Achieve, Inc., 2012

2012-01-01

The U.S. economy has undergone dramatic changes in recent decades. Jobs that required limited skills--but still paid a family-supporting wage--have disappeared and increasingly have been replaced with jobs that either require higher levels of education and skills "or" require little education and training but offer no pathways to careers…

40 CFR 80.614 - What are the alternative defense requirements in lieu of § 80.613(a)(1)(vi)?

Code of Federal Regulations, 2010 CFR

2010-07-01

... the additive package has been added, together with supporting data which includes one of the following... a MVNRLM diesel fuel additive package into MVNRLM diesel fuel subject to the 15 ppm sulfur standards... alternative to the defense element under § 80.613(a)(1)(vi): (a)(1) The blender of the additive package has a...

40 CFR 80.614 - What are the alternative defense requirements in lieu of § 80.613(a)(1)(vi)?

Code of Federal Regulations, 2012 CFR

2012-07-01

... the additive package has been added, together with supporting data which includes one of the following... a MVNRLM diesel fuel additive package into MVNRLM diesel fuel subject to the 15 ppm sulfur standards... alternative to the defense element under § 80.613(a)(1)(vi): (a)(1) The blender of the additive package has a...

40 CFR 80.614 - What are the alternative defense requirements in lieu of § 80.613(a)(1)(vi)?

Code of Federal Regulations, 2014 CFR

2014-07-01

... the additive package has been added, together with supporting data which includes one of the following... a MVNRLM diesel fuel additive package into MVNRLM diesel fuel subject to the 15 ppm sulfur standards... alternative to the defense element under § 80.613(a)(1)(vi): (a)(1) The blender of the additive package has a...

40 CFR 80.614 - What are the alternative defense requirements in lieu of § 80.613(a)(1)(vi)?

Code of Federal Regulations, 2013 CFR

2013-07-01

... the additive package has been added, together with supporting data which includes one of the following... a MVNRLM diesel fuel additive package into MVNRLM diesel fuel subject to the 15 ppm sulfur standards... alternative to the defense element under § 80.613(a)(1)(vi): (a)(1) The blender of the additive package has a...

40 CFR 80.614 - What are the alternative defense requirements in lieu of § 80.613(a)(1)(vi)?

Code of Federal Regulations, 2011 CFR

2011-07-01

... the additive package has been added, together with supporting data which includes one of the following... a MVNRLM diesel fuel additive package into MVNRLM diesel fuel subject to the 15 ppm sulfur standards... alternative to the defense element under § 80.613(a)(1)(vi): (a)(1) The blender of the additive package has a...

20 CFR 411.180 - What is timely progress toward self-supporting employment?

Code of Federal Regulations, 2010 CFR

2010-04-01

... certificate or vocational or technical training that will enhance your ability to return to work. In addition...-secondary education requirement or vocational or technical training requirement in the applicable progress... this 12-month period; or (iv) You must have been enrolled in a vocational or technical training program...

Automatic and Controlled Processing in Sentence Recall: The Role of Long-Term and Working Memory

ERIC Educational Resources Information Center

Jefferies, E.; Lambon Ralph, M.A.; Baddeley, A.D.

2004-01-01

Immediate serial recall is better for sentences than word lists presumably because of the additional support that meaningful material receives from long-term memory. This may occur automatically, without the involvement of attention, or may require additional attentionally demanding processing. For example, the episodic buffer model (Baddeley,…

Manned Mars mission accommodation: Sprint mission

NASA Technical Reports Server (NTRS)

Cirillo, William M.; Kaszubowski, Martin J.; Ayers, J. Kirk; Llewellyn, Charles P.; Weidman, Deene J.; Meredith, Barry D.

1988-01-01

The results of a study conducted at the NASA-LaRC to assess the impacts on the Phase 2 Space Station of Accommodating a Manned Mission to Mars are documented. In addition, several candidate transportation node configurations are presented to accommodate the assembly and verification of the Mars Mission vehicles. This study includes an identification of a life science research program that would need to be completed, on-orbit, prior to mission departure and an assessment of the necessary orbital technology development and demonstration program needed to accomplish the mission. Also included is an analysis of the configuration mass properties and a preliminary analysis of the Space Station control system sizing that would be required to control the station. Results of the study indicate the Phase 2 Space Station can support a manned mission to Mars with the addition of a supporting infrastructure that includes a propellant depot, assembly hangar, and a heavy lift launch vehicle to support the large launch requirements.

ATM kinase is required for telomere elongation in mouse and human cells

PubMed Central

Lee, Stella Suyong; Bohrson, Craig; Pike, Alexandra Mims; Wheelan, Sarah Jo; Greider, Carol Widney

2015-01-01

Summary Short telomeres induce a DNA damage response, senescence and apoptosis; thus, maintaining telomere length equilibrium is essential for cell viability. Telomerase addition of telomere repeats is tightly regulated in cells. To probe pathways that regulate telomere addition, we developed the ADDIT assay to measure new telomere addition at a single telomere in vivo. Sequence analysis showed telomerase specific addition of repeats onto a new telomere occurred in just 48 hr. Using the ADDIT assay, we found that ATM is required for addition of new repeats onto telomeres in mouse cells. Evaluation of bulk telomeres, in both human and mouse cells, showed that blocking ATM inhibited telomere elongation. Finally, the activation of ATM through the inhibition of PARP1 resulted in increased telomere elongation, supporting the central role of the ATM pathway in regulating telomere addition. Understanding this role of ATM may yield new areas for possible therapeutic intervention in telomere-mediated disease. PMID:26586427

Requirements Development Issues for Advanced Life Support Systems: Solid Waste Management

NASA Technical Reports Server (NTRS)

Levri, Julie A.; Fisher, John W.; Alazraki, Michael P.; Hogan, John A.

2002-01-01

Long duration missions pose substantial new challenges for solid waste management in Advanced Life Support (ALS) systems. These possibly include storing large volumes of waste material in a safe manner, rendering wastes stable or sterilized for extended periods of time, and/or processing wastes for recovery of vital resources. This is further complicated because future missions remain ill-defined with respect to waste stream quantity, composition and generation schedule. Without definitive knowledge of this information, development of requirements is hampered. Additionally, even if waste streams were well characterized, other operational and processing needs require clarification (e.g. resource recovery requirements, planetary protection constraints). Therefore, the development of solid waste management (SWM) subsystem requirements for long duration space missions is an inherently uncertain, complex and iterative process. The intent of this paper is to address some of the difficulties in writing requirements for missions that are not completely defined. This paper discusses an approach and motivation for ALS SWM requirements development, the characteristics of effective requirements, and the presence of those characteristics in requirements that are developed for uncertain missions. Associated drivers for life support system technological capability are also presented. A general means of requirements forecasting is discussed, including successive modification of requirements and the need to consider requirements integration among subsystems.

40 CFR 80.157 - Volumetric additive reconciliation (“VAR”), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... preceding two months of VAR supporting documentation. (2) Except as provided in paragraph (g)(3) of this... immediately available to EPA, upon request, the preceding two months of VAR formula records and VAR supporting.... Detergent so used must be accurately and separately measured, either through the use of a separate storage...

40 CFR 80.157 - Volumetric additive reconciliation (“VAR”), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... preceding two months of VAR supporting documentation. (2) Except as provided in paragraph (g)(3) of this... immediately available to EPA, upon request, the preceding two months of VAR formula records and VAR supporting.... Detergent so used must be accurately and separately measured, either through the use of a separate storage...

40 CFR 80.157 - Volumetric additive reconciliation (“VAR”), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... preceding two months of VAR supporting documentation. (2) Except as provided in paragraph (g)(3) of this... immediately available to EPA, upon request, the preceding two months of VAR formula records and VAR supporting.... Detergent so used must be accurately and separately measured, either through the use of a separate storage...

40 CFR 80.157 - Volumetric additive reconciliation (“VAR”), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... preceding two months of VAR supporting documentation. (2) Except as provided in paragraph (g)(3) of this... immediately available to EPA, upon request, the preceding two months of VAR formula records and VAR supporting.... Detergent so used must be accurately and separately measured, either through the use of a separate storage...

40 CFR 80.157 - Volumetric additive reconciliation (“VAR”), equipment calibration, and recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... preceding two months of VAR supporting documentation. (2) Except as provided in paragraph (g)(3) of this... immediately available to EPA, upon request, the preceding two months of VAR formula records and VAR supporting.... Detergent so used must be accurately and separately measured, either through the use of a separate storage...

76 FR 4584 - Approval and Promulgation of Air Quality Implementation Plans; Georgia; Disapproval of Interstate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-26

... conclusion must be supported by an adequate technical analysis. Second, EPA recommended the various types of... requirement of section 110(a)(2)(D)(i)(I) must be supported by an adequate technical analysis. Additionally... evaluate or demonstrate with a technical analysis that this measure and their intention to rely to the...

The Power Dynamics and Politics of Survey Design: Measuring Workload Associated with Teaching, Administering and Supporting Work-Integrated Learning Courses

ERIC Educational Resources Information Center

Clark, Lindie; Rowe, Anna; Cantori, Alex; Bilgin, Ayse; Mukuria, Valentine

2016-01-01

Work-integrated learning (WIL) courses can be more time consuming and resource intensive to design, teach, administer and support than classroom-based courses, as they generally require different curricula and pedagogical approaches as well as additional administrative and pastoral responsibilities. Workload and resourcing issues are reported as…

A generic template for automated bioanalytical ligand-binding assays using modular robotic scripts in support of discovery biotherapeutic programs.

PubMed

Duo, Jia; Dong, Huijin; DeSilva, Binodh; Zhang, Yan J

2013-07-01

Sample dilution and reagent pipetting are time-consuming steps in ligand-binding assays (LBAs). Traditional automation-assisted LBAs use assay-specific scripts that require labor-intensive script writing and user training. Five major script modules were developed on Tecan Freedom EVO liquid handling software to facilitate the automated sample preparation and LBA procedure: sample dilution, sample minimum required dilution, standard/QC minimum required dilution, standard/QC/sample addition, and reagent addition. The modular design of automation scripts allowed the users to assemble an automated assay with minimal script modification. The application of the template was demonstrated in three LBAs to support discovery biotherapeutic programs. The results demonstrated that the modular scripts provided the flexibility in adapting to various LBA formats and the significant time saving in script writing and scientist training. Data generated by the automated process were comparable to those by manual process while the bioanalytical productivity was significantly improved using the modular robotic scripts.

Space Station Furnace Facility. Experiment/Facility Requirements Document (E/FRD), volume 2, appendix 5

NASA Technical Reports Server (NTRS)

Kephart, Nancy

1992-01-01

The function of the Space Station Furnace Facility (SSFF) is to support materials research into the crystal growth and solidification processes of electronic and photonic materials, metals and alloys, and glasses and ceramics. To support this broad base of research requirements, the SSFF will employ a variety of furnace modules operated, regulated, and supported by a core of common subsystems. Furnace modules may be reconfigured or specifically developed to provide unique solidifcation conditions for each set of experiments. The SSFF modular approach permits the addition of new or scaled-up furnace modules to support the evolution of the facility as new science requirements are identified. The SSFF Core is of modular design to permit augmentation for enhanced capabilities. The fully integrated configuration of the SSFF will consist of three racks with the capability of supporting up to two furnace modules per rack. The initial configuration of the SSFF will consist of two of the three racks and one furnace module. This Experiment/Facility Requirements Document (E/FRD) describes the integrated facility requirements for the Space Station Freedom (SSF) Integrated Configuration-1 (IC1) mission. The IC1 SSFF will consist of two racks: the Core Rack, with the centralized subsystem equipment, and the Experiment Rack-1, with Furnace Module-1 and the distributed subsystem equipment to support the furnace.

Space Station Freedom extravehicular activity systems evolution study

NASA Technical Reports Server (NTRS)

Rouen, Michael

1990-01-01

Evaluation of Space Station Freedom (SSF) support of manned exploration is in progress to identify SSF extravehicular activity (EVA) system evolution requirements and capabilities. The output from these studies will provide data to support the preliminary design process to ensure that Space Station EVA system requirements for future missions (including the transportation node) are adequately considered and reflected in the baseline design. The study considers SSF support of future missions and the EVA system baseline to determine adequacy of EVA requirements and capabilities and to identify additional requirements, capabilities, and necessary technology upgrades. The EVA demands levied by formal requirements and indicated by evolutionary mission scenarios are high for the out-years of Space Station Freedom. An EVA system designed to meet the baseline requirements can easily evolve to meet evolution demands with few exceptions. Results to date indicate that upgrades or modifications to the EVA system may be necessary to meet the full range of EVA thermal environments associated with the transportation node. Work continues to quantify the EVA capability in this regard. Evolution mission scenarios with EVA and ground unshielded nuclear propulsion engines are inconsistent with anthropomorphic EVA capabilities.

Space station accommodations for lunar base elements: A study

NASA Technical Reports Server (NTRS)

Weidman, Deene J.; Cirillo, William; Llewellyn, Charles; Kaszubowski, Martin; Kienlen, E. Michael, Jr.

1987-01-01

The results of a study conducted at NASA-LaRC to assess the impact on the space station of accommodating a Manned Lunar Base are documented. Included in the study are assembly activities for all infrastructure components, resupply and operations support for lunar base elements, crew activity requirements, the effect of lunar activities on Cape Kennedy operations, and the effect on space station science missions. Technology needs to prepare for such missions are also defined. Results of the study indicate that the space station can support the manned lunar base missions with the addition of a Fuel Depot Facility and a heavy lift launch vehicle to support the large launch requirements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kasemir, Kay; Pearson, Matthew R

For several years, the Control System Studio (CS-Studio) Scan System has successfully automated the operation of beam lines at the Oak Ridge National Laboratory (ORNL) High Flux Isotope Reactor (HFIR) and Spallation Neutron Source (SNS). As it is applied to additional beam lines, we need to support simultaneous adjustments of temperatures or motor positions. While this can be implemented via virtual motors or similar logic inside the Experimental Physics and Industrial Control System (EPICS) Input/Output Controllers (IOCs), doing so requires a priori knowledge of experimenters requirements. By adding support for the parallel control of multiple process variables (PVs) to themore » Scan System, we can better support ad hoc automation of experiments that benefit from such simultaneous PV adjustments.« less

Expanding the PACS archive to support clinical review, research, and education missions

NASA Astrophysics Data System (ADS)

Honeyman-Buck, Janice C.; Frost, Meryll M.; Drane, Walter E.

1999-07-01

Designing an image archive and retrieval system that supports multiple users with many different requirements and patterns of use without compromising the performance and functionality required by diagnostic radiology is an intellectual and technical challenge. A diagnostic archive, optimized for performance when retrieving diagnostic images for radiologists needed to be expanded to support a growing clinical review network, the University of Florida Brain Institute's demands for neuro-imaging, Biomedical Engineering's imaging sciences, and an electronic teaching file. Each of the groups presented a different set of problems for the designers of the system. In addition, the radiologists did not want to see nay loss of performance as new users were added.

Women's opinions of legal requirements for drug testing in prenatal care.

PubMed

Tucker Edmonds, Brownsyne; Mckenzie, Fatima; Austgen, MacKenzie B; Carroll, Aaron E; Meslin, Eric M

2017-07-01

To explore women's attitudes and perceptions regarding legal requirements for prenatal drug testing. Web-based survey of 500 US women (age 18-45) recruited from a market research survey panel. A 24-item questionnaire assessed their opinion of laws requiring doctors to routinely verbal screen and urine drug test patients during pregnancy; recommendations for consequences for positive drug tests during pregnancy; and opinion of laws requiring routine drug testing of newborns. Additional questions asked participants about the influence of such laws on their own care-seeking behaviors. Data were analyzed for associations between participant characteristics and survey responses using Pearson's chi-squared test. The majority of respondents (86%) stated they would support a law requiring verbal screening of all pregnant patients and 73% would support a law requiring universal urine drug testing in pregnancy. Fewer respondents were willing to support laws that required verbal screening or urine drug testing (68% and 61%, respectively) targeting only Medicaid recipients. Twenty-one percent of respondents indicated they would be offended if their doctors asked them about drug use and 14% indicated that mandatory drug testing would discourage prenatal care attendance. Women would be more supportive of policies requiring universal rather than targeted screening and testing for prenatal drug use. However, a noteworthy proportion of women would be discouraged from attending prenatal care - a reminder that drug testing policies may have detrimental effects on maternal child health.

Satellite ATM Networks: Architectures and Guidelines Developed

NASA Technical Reports Server (NTRS)

vonDeak, Thomas C.; Yegendu, Ferit

1999-01-01

An important element of satellite-supported asynchronous transfer mode (ATM) networking will involve support for the routing and rerouting of active connections. Work published under the auspices of the Telecommunications Industry Association (http://www.tiaonline.org), describes basic architectures and routing protocol issues for satellite ATM (SATATM) networks. The architectures and issues identified will serve as a basis for further development of technical specifications for these SATATM networks. Three ATM network architectures for bent pipe satellites and three ATM network architectures for satellites with onboard ATM switches were developed. The architectures differ from one another in terms of required level of mobility, supported data rates, supported terrestrial interfaces, and onboard processing and switching requirements. The documentation addresses low-, middle-, and geosynchronous-Earth-orbit satellite configurations. The satellite environment may require real-time routing to support the mobility of end devices and nodes of the ATM network itself. This requires the network to be able to reroute active circuits in real time. In addition to supporting mobility, rerouting can also be used to (1) optimize network routing, (2) respond to changing quality-of-service requirements, and (3) provide a fault tolerance mechanism. Traffic management and control functions are necessary in ATM to ensure that the quality-of-service requirements associated with each connection are not violated and also to provide flow and congestion control functions. Functions related to traffic management were identified and described. Most of these traffic management functions will be supported by on-ground ATM switches, but in a hybrid terrestrial-satellite ATM network, some of the traffic management functions may have to be supported by the onboard satellite ATM switch. Future work is planned to examine the tradeoffs of placing traffic management functions onboard a satellite as opposed to implementing those functions at the Earth station components.

Technical Assistance Needs Assessments (TANAs)

EPA Pesticide Factsheets

The Technical Assistance Needs Assessment (TANA) is a process to identify whether a community requires additional support from EPA in order to understand technical information and have meaningful participation in the Superfund decision-making process.

75 FR 70150 - Airworthiness Directives; McDonnell Douglas Corporation Model MD-11 and MD-11F Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

... installation of hardware. Boeing stated that the original NPRM implies that only wiring changes would be required; installation of brackets and supporting hardware, however, are required in addition to the wiring... tail tank fuel system, a wiring change, and corrective actions if necessary. That NPRM was prompted by...

High School Graduation Requirements in a Time of College and Career Readiness. CSAI Report

ERIC Educational Resources Information Center

Center on Standards and Assessments Implementation, 2016

2016-01-01

Ensuring that students graduate high school prepared for college and careers has become a national priority in the last decade. To support this goal, states have adopted rigorous college and career readiness (CCR) standards in English language arts (ELA) and mathematics. Additionally, states have begun to require students to pass assessments, in…

Space Launch System, Core Stage, Structural Test Design and Implementation

NASA Technical Reports Server (NTRS)

Shaughnessy, Ray

2017-01-01

As part of the National Aeronautics and Space Administration's (NASA) Space Launch System (SLS) Program, engineers at NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama are working to design, develop and implement the SLS Core Stage structural testing. The SLS will have the capability to return humans to the Moon and beyond and its first launch is scheduled for December of 2017. The SLS Core Stage consist of five major elements; Forward Skirt, Liquid Oxygen (LOX) tank, Intertank (IT), Liquid Hydrogen (LH2) tank and the Engine Section (ES). Structural Test Articles (STA) for each of these elements are being designed and produced by Boeing at Michoud Assembly Facility located in New Orleans, La. The structural test for the Core Stage STAs (LH2, LOX, IT and ES) are to be conducted by the MSFC Test Laboratory. Additionally, the MSFC Test Laboratory manages the Structural Test Equipment (STE) design and development to support the STAs. It was decided early (April 2012) in the project life that the LH2 and LOX tank STAs would require new test stands and the Engine Section and Intertank would be tested in existing facilities. This decision impacted schedules immediately because the new facilities would require Construction of Facilities (C of F) funds that require congressional approval and long lead times. The Engine Section and Intertank structural test are to be conducted in existing facilities which will limit lead times required to support the first launch of SLS. With a SLS launch date of December, 2017 Boeing had a need date for testing to be complete by September of 2017 to support flight certification requirements. The test facilities were required to be ready by October of 2016 to support test article delivery. The race was on to get the stands ready before Test Article delivery and meet the test complete date of September 2017. This paper documents the past and current design and development phases and the supporting processes, tools, and methodology for supporting the SLS Core Stage STA test stands and related STE. The paper will address key requirements, system development activities and project challenges. Additionally, the interrelationships as well as interdependencies within the SLS project will be discussed.

Altair Lander Life Support: Requirement Analysis Cycles 1 and 2

NASA Technical Reports Server (NTRS)

Anderson, Molly; Curley, Su; Rotter, Henry; Yagoda, Evan

2009-01-01

Life support systems are a critical part of human exploration beyond low earth orbit. NASA s Altair Lunar Lander has unique missions to perform and will need a unique life support system to complete them. Initial work demonstrated a feasible minimally-functional Lander design. This work was completed in Design Analysis Cycles (DAC) 1, 2, and 3 were reported in a previous paper. On October 21, 2008, the Altair project completed the Mission Concept Review (MCR), moving the project into Phase A. In Phase A activities, the project is preparing for the System Requirements Review (SRR). Altair has conducted two Requirements Analysis Cycles (RACs) to begin this work. During this time, the life support team must examine the Altair mission concepts, Constellation Program level requirements, and interfaces with other vehicles and spacesuits to derive the right set of requirements for the new vehicle. The minimum functionality design meets some of these requirements already and can be easily adapted to meet others. But Altair must identify which will be more costly in mass, power, or other resources to meet. These especially costly requirements must be analyzed carefully to be sure they are truly necessary, and are the best way of explaining and meeting the true need. If they are necessary and clear, they become important mass threats to track at the vehicle level. If they are not clear or do not seem necessary to all stakeholders, Altair must work to redefine them or push back on the requirements writers. Additionally, the life support team is evaluating new technologies to see if they are more effective than the existing baseline design at performing necessary functions in Altair s life support system.

Altair Lander Life Support: Requirements Analysis Cycles 1 and 2

NASA Technical Reports Server (NTRS)

Anderson, Molly; Curley, Su; Rotter, Henry; Yagoda, Evan

2010-01-01

Life support systems are a critical part of human exploration beyond low earth orbit. NASA's Altair Lunar Lander has unique missions to perform and will need a unique life support system to complete them. Initial work demonstrated a feasible minimally -functional Lander design. This work was completed in Design Analysis Cycles (DAC) 1, 2, and 3 were reported in a previous paper'. On October 21, 2008, the Altair project completed the Mission Concept Review (MCR), moving the project into Phase A. In Phase A activities, the project is preparing for the System Requirements Review (SRR). Altair has conducted two Requirements Analysis Cycles (RACs) to begin this work. During this time, the life support team must examine the Altair mission concepts, Constellation Program level requirements, and interfaces with other vehicles and spacesuits to derive the right set of requirements for the new vehicle. The minimum functionality design meets some of these requirements already and can be easily adapted to meet others. But Altair must identify which will be more costly in mass, power, or other resources to meet. These especially costly requirements must be analyzed carefully to be sure they are truly necessary, and are the best way of explaining and meeting the true need. If they are necessary and clear, they become important mass threats to track at the vehicle level. If they are not clear or do not seem necessary to all stakeholders, Altair must work to redefine them or push back on the requirements writers. Additionally, the life support team is evaluating new technologies to see if they are more effective than the existing baseline design at performing necessary functions in Altair's life support system.

Parents' and providers' attitudes toward school-located provision and school-entry requirements for HPV vaccines

PubMed Central

Vercruysse, Jessica; Chigurupati, Nagasudha L.; Fung, Leslie; Apte, Gauri; Pierre-Joseph, Natalie; Perkins, Rebecca B.

2016-01-01

ABSTRACT Objective: To determine parents' and providers' attitudes toward school-located provision and school-entry requirements for HPV vaccination. Methods: Parents/guardians of 11–17 y old girls and pediatric healthcare providers at one inner-city public clinic and three private practices completed semi-structured interviews in 2012-2013. Participants were asked open-ended questions regarding their attitudes toward school-located provision and school-entry requirements for HPV vaccination. Parents' answers were analyzed with relationship to whether their daughters had not initiated, initiated but not completed, or completed the HPV vaccine series. Qualitative analysis was used to identify themes related to shared views. Results: 129 parents/guardians and 34 providers participated. 61% of parents supported providing HPV vaccinations in schools, citing reasons of convenience, improved access, and positive peer pressure. Those who opposed school-located provision raised concerns related to privacy and the capacity of school nurses to manage vaccine-related reactions. Parents whose daughters had not completed the series were more likely to intend to vaccinate their daughters in schools (70%) and support requirements (64%) than parents who had not initiated vaccination (42% would vaccinate at school, 46% support requirements) or completed the series (42% would vaccinate at school, 32% support requirements; p < 0 .05 for all comparisons). 81% of providers supported offering vaccination in schools, wanting to take advantage of the captive audience, improve vaccine completion rates, and decrease the administrative burden on medical office staff, but were concerned about adequate information transfer between schools and medical offices. Only 32% of providers supported school-entry requirements, largely because they felt that a requirement might provoke a public backlash that could further hinder vaccination efforts. Conclusions: School-located provision of HPV vaccination was widely accepted by healthcare providers and parents whose children have not completed the series, indicating that this venue might be a valuable addition to improve completion rates. Support for school-entry requirements was limited among both parents and healthcare providers. PMID:26934421

Parents' and providers' attitudes toward school-located provision and school-entry requirements for HPV vaccines.

PubMed

Vercruysse, Jessica; Chigurupati, Nagasudha L; Fung, Leslie; Apte, Gauri; Pierre-Joseph, Natalie; Perkins, Rebecca B

2016-06-02

To determine parents' and providers' attitudes toward school-located provision and school-entry requirements for HPV vaccination. Parents/guardians of 11-17 y old girls and pediatric healthcare providers at one inner-city public clinic and three private practices completed semi-structured interviews in 2012-2013. Participants were asked open-ended questions regarding their attitudes toward school-located provision and school-entry requirements for HPV vaccination. Parents' answers were analyzed with relationship to whether their daughters had not initiated, initiated but not completed, or completed the HPV vaccine series. Qualitative analysis was used to identify themes related to shared views. 129 parents/guardians and 34 providers participated. 61% of parents supported providing HPV vaccinations in schools, citing reasons of convenience, improved access, and positive peer pressure. Those who opposed school-located provision raised concerns related to privacy and the capacity of school nurses to manage vaccine-related reactions. Parents whose daughters had not completed the series were more likely to intend to vaccinate their daughters in schools (70%) and support requirements (64%) than parents who had not initiated vaccination (42% would vaccinate at school, 46% support requirements) or completed the series (42% would vaccinate at school, 32% support requirements; p < 0 .05 for all comparisons). 81% of providers supported offering vaccination in schools, wanting to take advantage of the captive audience, improve vaccine completion rates, and decrease the administrative burden on medical office staff, but were concerned about adequate information transfer between schools and medical offices. Only 32% of providers supported school-entry requirements, largely because they felt that a requirement might provoke a public backlash that could further hinder vaccination efforts. School-located provision of HPV vaccination was widely accepted by healthcare providers and parents whose children have not completed the series, indicating that this venue might be a valuable addition to improve completion rates. Support for school-entry requirements was limited among both parents and healthcare providers.

Manned Orbital Transfer Vehicle (MOTV). Volume 6: Five year program plan

NASA Technical Reports Server (NTRS)

Boyland, R. E.; Sherman, S. W.; Morfin, H. W.

1979-01-01

The five year program plan for the manned orbit transfer vehicle (MOTV) is presented. The planning, schedules, cost estimates, and supporting data (objectives, constraints, assumptions, etc.) associated with the development of the MOTV are discussed. The plan, in addition to the above material, identifies the supporting research and technology required to resolve issues critical to MOTV development.

Classroom Behaviour Management Strategies in Response to Problematic Behaviours of Primary School Children with Special Educational Needs: Views of Special Educational Needs Coordinators

ERIC Educational Resources Information Center

Nye, Elizabeth; Gardner, Frances; Hansford, Lorraine; Edwards, Vanessa; Hayes, Rachel; Ford, Tamsin

2016-01-01

Children identified with special educational needs (SEN) and behavioural difficulties present extra challenges to educators and require additional supports in school. This paper presents views from special educational needs coordinators (SENCos) on various strategies used by educators to support children identified with SEN and problematic…

Key Players in Inclusion: Are We Meeting the Professional Needs of Learning Support Assistants for Pupils with Complex Needs?

ERIC Educational Resources Information Center

Abbott, Lesley; McConkey, Roy; Dobbins, Michael

2011-01-01

Under the aegis of inclusion, greater numbers of learning support assistants (LSAs) in mainstream and special schools are increasingly required to assist teachers with pupils who have complex needs across the full age range. Because of the numerous and wide-ranging learning difficulties and learning disabilities in addition to sensory impairment,…

Person-centred care in chronic kidney disease: a cross-sectional study of patients' desires for self-management support.

PubMed

Havas, Kathryn; Douglas, Clint; Bonner, Ann

2017-01-13

People with chronic kidney disease (CKD) must self-manage their illness to assist with slowing disease-progression, but this is a complex task requiring support from healthcare professionals. Despite the established importance of person-centred care, people with CKD are rarely consulted regarding their desires for self-management support (SMS). A cross-sectional survey was conducted face-to-face in a Queensland primary care clinic and distributed Australia-wide via an online interface promoted by Kidney Health Australia during 2015. Participants were ≥18 years old and had a self-reported doctor's diagnosis of CKD (any stage; N = 97). The survey was based upon existent literature which identified 10 areas that those with CKD believe require additional support. Descriptive data were generated and Mann-Whitney U tests were performed to compare the desires of different groups of participants. Of the 97 participants, 36 completed a hardcopy survey in clinic, and 61 completed the online version. Just over half (60.8%) were female, age ranged from 16-89 (M = 56.44), and time since diagnosis ranged from just diagnosed to 60 years (Mdn = 8.08 years). Strong interest in receiving additional support across all 10 areas was reported (Mdns = 8.00-10.00), with "keeping a positive attitude and taking care of mental and physical health" receiving the highest rating. Those who were: younger (p < .001); more highly educated (p < .001); working (p < .001); diagnosed longer ago (p = .015); and women (p = .050) expressed stronger overall desire for additional support. In addition to information about CKD and medications, everyday strategies ought to be prioritised in patient education. Varying levels of engagement and eagerness to learn more about self-management highlight the need for a person-centred approach to SMS.

Water Recovery System Architecture and Operational Concepts to Accommodate Dormancy

NASA Technical Reports Server (NTRS)

Carter, Layne; Tabb, David; Anderson, Molly

2017-01-01

Future manned missions beyond low Earth orbit will include intermittent periods of extended dormancy. The mission requirement includes the capability for life support systems to support crew activity, followed by a dormant period of up to one year, and subsequently for the life support systems to come back online for additional crewed missions. NASA personnel are evaluating the architecture and operational concepts that will allow the Water Recovery System (WRS) to support such a mission. Dormancy could be a critical issue due to concerns with microbial growth or chemical degradation that might prevent water systems from operating properly when the crewed mission began. As such, it is critical that the water systems be designed to accommodate this dormant period. This paper identifies dormancy issues, concepts for updating the WRS architecture and operational concepts that will enable the WRS to support the dormancy requirement.

Providing end-to-end QoS for multimedia applications in 3G wireless networks

NASA Astrophysics Data System (ADS)

Guo, Katherine; Rangarajan, Samapth; Siddiqui, M. A.; Paul, Sanjoy

2003-11-01

As the usage of wireless packet data services increases, wireless carriers today are faced with the challenge of offering multimedia applications with QoS requirements within current 3G data networks. End-to-end QoS requires support at the application, network, link and medium access control (MAC) layers. We discuss existing CDMA2000 network architecture and show its shortcomings that prevent supporting multiple classes of traffic at the Radio Access Network (RAN). We then propose changes in RAN within the standards framework that enable support for multiple traffic classes. In addition, we discuss how Session Initiation Protocol (SIP) can be augmented with QoS signaling for supporting end-to-end QoS. We also review state of the art scheduling algorithms at the base station and provide possible extensions to these algorithms to support different classes of traffic as well as different classes of users.

Space construction base support requirements for environmental control and life support systems

NASA Technical Reports Server (NTRS)

Thiele, R. J.; Secord, T. C.; Murphy, G. L.

1977-01-01

A Space Station analysis study is being performed for NASA which identifies cost-effective Space Station options that can provide a space facility capable of performing space construction, space manufacturing, cosmological research, earth services, and other functions. A space construction base concept for the construction of large structures, such as those needed to implement satellite solar power for earth usage, will be used as a basis for discussing requirements that impact the design selection, level of integration, and operation of environmental control and life support systems (ECLSS). The space construction base configuration also provides a basic Space Station facility that can accommodate biological manufacturing modules, ultrapure glasses manufacturing modules, and modules for other services in a building-block fashion. Examples of special problems that could dictate hardware required to augment the basic ECLSS for autonomous modules will be highlighted. Additionally, overall intravehicular (IVA) and extravehicular (EVA) activities and requirements that could impact the basic station ECLSS degree of closure are discussed.

Plans for Assessing Contractor Performance for the Camp Lemonnier Base Operations Support Contract Needed Improvement

DTIC Science & Technology

2015-08-27

ensure the functional assessment plans ( FAP ) for the three services contained all contractor work requiring assessment, measurable performance...review the FAPs after development and revisions to the FAPs , and did not require additional controls over the contractor assessment process in an...revised as follows: • Business Management System B-14.3 was updated to require the contract officer representative conduct a FAP review to ensure

Materials, Processes and Manufacturing in Ares 1 Upper Stage: Integration with Systems Design and Development

NASA Technical Reports Server (NTRS)

Bhat, Biliyar N.

2008-01-01

Ares I Crew Launch Vehicle Upper Stage is designed and developed based on sound systems engineering principles. Systems Engineering starts with Concept of Operations and Mission requirements, which in turn determine the launch system architecture and its performance requirements. The Ares I-Upper Stage is designed and developed to meet these requirements. Designers depend on the support from materials, processes and manufacturing during the design, development and verification of subsystems and components. The requirements relative to reliability, safety, operability and availability are also dependent on materials availability, characterization, process maturation and vendor support. This paper discusses the roles and responsibilities of materials and manufacturing engineering during the various phases of Ares IUS development, including design and analysis, hardware development, test and verification. Emphasis is placed how materials, processes and manufacturing support is integrated over the Upper Stage Project, both horizontally and vertically. In addition, the paper describes the approach used to ensure compliance with materials, processes, and manufacturing requirements during the project cycle, with focus on hardware systems design and development.

IDSE Version 1 User's Manual

NASA Technical Reports Server (NTRS)

Mayer, Richard

1988-01-01

The integrated development support environment (IDSE) is a suite of integrated software tools that provide intelligent support for information modelling. These tools assist in function, information, and process modeling. Additional tools exist to assist in gathering and analyzing information to be modeled. This is a user's guide to application of the IDSE. Sections covering the requirements and design of each of the tools are presented. There are currently three integrated computer aided manufacturing definition (IDEF) modeling methodologies: IDEF0, IDEF1, and IDEF2. Also, four appendices exist to describe hardware and software requirements, installation procedures, and basic hardware usage.

The importance of timely information in national cancer screening programmes.

PubMed

Droljc, Anze; Grbec, Tomaz; Orel, Andrej

2009-01-01

The Ministry of Health of Slovenia decided to support the introduction of two new organised screening programmes for cancer, one for breast and the other for colon cancer in 2005. This was an addition to the first, already running, programme for cervical cancer. Two of them are entrusted to the Institute of Oncology while the National CINDI programme takes care of the third one. Besides connection to some external public databases, cancer screening programmes require national Cancer Registry data. High quality and user friendly information support for citizens and medical professionals following doctrinal requirements and possible changes is a must.

Unique Testing Capabilities of the NASA Langley Transonic Dynamics Tunnel, an Exercise in Aeroelastic Scaling

NASA Technical Reports Server (NTRS)

Ivanco, Thomas G.

2013-01-01

NASA Langley Research Center's Transonic Dynamics Tunnel (TDT) is the world's most capable aeroelastic test facility. Its large size, transonic speed range, variable pressure capability, and use of either air or R-134a heavy gas as a test medium enable unparalleled manipulation of flow-dependent scaling quantities. Matching these scaling quantities enables dynamic similitude of a full-scale vehicle with a sub-scale model, a requirement for proper characterization of any dynamic phenomenon, and many static elastic phenomena. Select scaling parameters are presented in order to quantify the scaling advantages of TDT and the consequence of testing in other facilities. In addition to dynamic testing, the TDT is uniquely well-suited for high risk testing or for those tests that require unusual model mount or support systems. Examples of recently conducted dynamic tests requiring unusual model support are presented. In addition to its unique dynamic test capabilities, the TDT is also evaluated in its capability to conduct aerodynamic performance tests as a result of its flow quality. Results of flow quality studies and a comparison to a many other transonic facilities are presented. Finally, the ability of the TDT to support future NASA research thrusts and likely vehicle designs is discussed.

The Self-Concept of Students in Remediation in a Rural Community College in Mississippi

ERIC Educational Resources Information Center

Wicks, Corky Fitzgerald

2017-01-01

Identifying students who may require additional assistance and coaching based on their self-concept score will also allow community colleges to provide additional support services for those students. If there is a difference in self-concept among students in a Mississippi community college, leaders might be able to use self-concept as a way of…

Experiment/facility requirements document for the Space Station Furnace Facility. Section 1: Integrated configuration

NASA Astrophysics Data System (ADS)

1992-05-01

The function of the Space Station Furnace Facility (SSFF) is to support materials research into the crystal growth and solidification processes of electronic and photonic materials, metals and alloys, and glasses and ceramics. To support this broad base of research requirements, the SSFF will employ a variety of furnace modules which will be operated, regulated, and supported by a core of common subsystems. Furnace modules may be reconfigured or specifically developed to provide unique solidification conditions for each set of experiments. The SSFF modular approach permits the addition of new or scaled-up furnace modules to support the evolution of the facility as new science requirements are identified. The SSFF Core is of modular design to permit augmentation for enhanced capabilities. The fully integrated configuration of the SSFF will consist of three racks with the capability of supporting up to two furnace modules per rack. The initial configuration of the SSFF will consist of two of the three racks and one furnace module. This Experiment/Facility Requirements Document (E/FRD) describes the integrated facility requirements for the Space Station Freedom (SSF) Integrated Configuration-1 (IC1) mission. The IC1 SSFF will consist of two racks: the Core Rack, with the centralized subsystem equipment; and the Experiment Rack-1, with Furnace Module-1 and the distributed subsystem equipment to support the furnace. The SSFF support functions are provided by the following Core subsystems: power conditioning and distribution subsystem (SSFF PCDS); data management subsystem (SSFF DMS); thermal control Subsystem (SSFF TCS); gas distribution subsystem (SSFF GDS); and mechanical structures subsystem (SSFF MSS).

Experiment/facility requirements document for the Space Station Furnace Facility. Section 1: Integrated configuration

NASA Technical Reports Server (NTRS)

1992-01-01

The function of the Space Station Furnace Facility (SSFF) is to support materials research into the crystal growth and solidification processes of electronic and photonic materials, metals and alloys, and glasses and ceramics. To support this broad base of research requirements, the SSFF will employ a variety of furnace modules which will be operated, regulated, and supported by a core of common subsystems. Furnace modules may be reconfigured or specifically developed to provide unique solidification conditions for each set of experiments. The SSFF modular approach permits the addition of new or scaled-up furnace modules to support the evolution of the facility as new science requirements are identified. The SSFF Core is of modular design to permit augmentation for enhanced capabilities. The fully integrated configuration of the SSFF will consist of three racks with the capability of supporting up to two furnace modules per rack. The initial configuration of the SSFF will consist of two of the three racks and one furnace module. This Experiment/Facility Requirements Document (E/FRD) describes the integrated facility requirements for the Space Station Freedom (SSF) Integrated Configuration-1 (IC1) mission. The IC1 SSFF will consist of two racks: the Core Rack, with the centralized subsystem equipment; and the Experiment Rack-1, with Furnace Module-1 and the distributed subsystem equipment to support the furnace. The SSFF support functions are provided by the following Core subsystems: power conditioning and distribution subsystem (SSFF PCDS); data management subsystem (SSFF DMS); thermal control Subsystem (SSFF TCS); gas distribution subsystem (SSFF GDS); and mechanical structures subsystem (SSFF MSS).

Concepts, requirements, and design approaches for building successful planning and scheduling systems

NASA Technical Reports Server (NTRS)

Hornstein, Rhoda Shaller; Willoughby, John K.

1991-01-01

Traditional practice of systems engineering management assumes requirements can be precisely determined and unambiguously defined prior to system design and implementation; practice further assumes requirements are held static during implementation. Human-computer decision support systems for service planning and scheduling applications do not conform well to these assumptions. Adaptation to the traditional practice of systems engineering management are required. Basic technology exists to support these adaptations. Additional innovations must be encouraged and nutured. Continued partnership between the programmatic and technical perspective assures proper balance of the impossible with the possible. Past problems have the following origins: not recognizing the unusual and perverse nature of the requirements for planning and scheduling; not recognizing the best starting point assumptions for the design; not understanding the type of system that being built; and not understanding the design consequences of the operations concept selected.

48 CFR 539.7001 - Policy.

Code of Federal Regulations, 2014 CFR

2014-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Additional Requirements for Purchases Not in Support of... Information Security Management Act (FISMA) describes Federal agency security responsibilities as including... behalf of an agency.” (b) Employees responsible for or procuring information technology supplies...

48 CFR 539.7001 - Policy.

Code of Federal Regulations, 2011 CFR

2011-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Additional Requirements for Purchases Not in Support of... Information Security Management Act (FISMA) describes Federal agency security responsibilities as including... behalf of an agency.” (b) Employees responsible for or procuring information technology supplies...

48 CFR 539.7001 - Policy.

Code of Federal Regulations, 2013 CFR

2013-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Additional Requirements for Purchases Not in Support of... Information Security Management Act (FISMA) describes Federal agency security responsibilities as including... behalf of an agency.” (b) Employees responsible for or procuring information technology supplies...

48 CFR 539.7001 - Policy.

Code of Federal Regulations, 2012 CFR

2012-10-01

... CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY Additional Requirements for Purchases Not in Support of... Information Security Management Act (FISMA) describes Federal agency security responsibilities as including... behalf of an agency.” (b) Employees responsible for or procuring information technology supplies...

78 FR 12137 - Agency Information Collection Activities: Request for the Renewal of an Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-21

... provides an online reporting tool to support the annual HSIP reporting process. Additional information is.../ . Reporting into the online reporting tool meets all report requirements and USDOT Web site compatibility...

Environmental projects, volume 11. Environmental assessment: Addition to operations building, Mars site

NASA Technical Reports Server (NTRS)

1990-01-01

An Environmental Assessment was performed of the proposed addition to building G-86 at the Mars Site, which will provide space for new electronic equipment to consolidate the Deep Space Network (DSN) support facilities from other Goldstone Deep Space Communication Complex (GDSCC) sites at the Mars Site, and will include a fifth telemetry and command group with its associated link monitor, control processor, and operator consoles. The addition of these facilities will increase the capability of the DSN to support future sophisticated NASA spacecraft missions such as the International Solar and Terrestrial Physics (ISTP) Program. The planned construction of this building addition requires an Environmental Assessment (EA) document that records the existing environmental conditions at the Mars Site, that analyzes the environmental effects that possibly could be expected from the construction and use of the new building addition, and that recommends measures to be taken to mitigate any possible deleterious environmental effects.

Implementing Parquet equations using HPX

NASA Astrophysics Data System (ADS)

Kellar, Samuel; Wagle, Bibek; Yang, Shuxiang; Tam, Ka-Ming; Kaiser, Hartmut; Moreno, Juana; Jarrell, Mark

A new C++ runtime system (HPX) enables simulations of complex systems to run more efficiently on parallel and heterogeneous systems. This increased efficiency allows for solutions to larger simulations of the parquet approximation for a system with impurities. The relevancy of the parquet equations depends upon the ability to solve systems which require long runs and large amounts of memory. These limitations, in addition to numerical complications arising from stability of the solutions, necessitate running on large distributed systems. As the computational resources trend towards the exascale and the limitations arising from computational resources vanish efficiency of large scale simulations becomes a focus. HPX facilitates efficient simulations through intelligent overlapping of computation and communication. Simulations such as the parquet equations which require the transfer of large amounts of data should benefit from HPX implementations. Supported by the the NSF EPSCoR Cooperative Agreement No. EPS-1003897 with additional support from the Louisiana Board of Regents.

Integrating O/S models during conceptual design, part 3

NASA Technical Reports Server (NTRS)

Ebeling, Charles E.

1994-01-01

Space vehicles, such as the Space Shuttle, require intensive ground support prior to, during, and after each mission. Maintenance is a significant part of that ground support. All space vehicles require scheduled maintenance to ensure operability and performance. In addition, components of any vehicle are not one-hundred percent reliable so they exhibit random failures. Once detected, a failure initiates unscheduled maintenance on the vehicle. Maintenance decreases the number of missions which can be completed by keeping vehicles out of service so that the time between the completion of one mission and the start of the next is increased. Maintenance also requires resources such as people, facilities, tooling, and spare parts. Assessing the mission capability and resource requirements of any new space vehicle, in addition to performance specification, is necessary to predict the life cycle cost and success of the vehicle. Maintenance and logistics support has been modeled by computer simulation to estimate mission capability and resource requirements for evaluation of proposed space vehicles. The simulation was written with Simulation Language for Alternative Modeling II (SLAM II) for execution on a personal computer. For either one or a fleet of space vehicles, the model simulates the preflight maintenance checks, the mission and return to earth, and the post flight maintenance in preparation to be sent back into space. THe model enables prediction of the number of missions possible and vehicle turn-time (the time between completion of one mission and the start of the next) given estimated values for component reliability and maintainability. The model also facilitates study of the manpower and vehicle requirements for the proposed vehicle to meet its desired mission rate. This is the 3rd part of a 3 part technical report.

Framework Support For Knowledge-Based Software Development

NASA Astrophysics Data System (ADS)

Huseth, Steve

1988-03-01

The advent of personal engineering workstations has brought substantial information processing power to the individual programmer. Advanced tools and environment capabilities supporting the software lifecycle are just beginning to become generally available. However, many of these tools are addressing only part of the software development problem by focusing on rapid construction of self-contained programs by a small group of talented engineers. Additional capabilities are required to support the development of large programming systems where a high degree of coordination and communication is required among large numbers of software engineers, hardware engineers, and managers. A major player in realizing these capabilities is the framework supporting the software development environment. In this paper we discuss our research toward a Knowledge-Based Software Assistant (KBSA) framework. We propose the development of an advanced framework containing a distributed knowledge base that can support the data representation needs of tools, provide environmental support for the formalization and control of the software development process, and offer a highly interactive and consistent user interface.

ADHERENCE TO ANTIRETROVIRAL THERAPY AMONG HIV-INFECTED ADULTS IN THE UNITED STATES

PubMed Central

Beer, Linda; Skarbinski, Jacek

2015-01-01

National estimates of antiretroviral therapy (ART) adherence and adherence support services utilization are needed to inform efforts to improve the health of HIV-infected persons in the United States. In a nationally representative sample of HIV-infected adults receiving medical care, 86% self-reported taking all ART doses in the past 72 hours. Overall, 20% reported using adherence support services and 2% reported an unmet need for services. If all nonadherent persons not receiving adherence support and all persons with a self-perceived unmet need for adherence support accessed services, resources to support ~42,673 additional persons would be needed. Factors associated with lower adherence included younger age, female gender, depression, stimulant use, binge alcohol use, greater than once-daily dosing, longer time since HIV diagnosis, and patient beliefs. Predictors of adherence are multifactorial so multiple targeted strategies to improve adherence are warranted. Providing adherence support services to all those in need may require additional resources. PMID:25490733

Interprofessional education about patient decision support in specialty care.

PubMed

Politi, Mary C; Pieterse, Arwen H; Truant, Tracy; Borkhoff, Cornelia; Jha, Vikram; Kuhl, Laura; Nicolai, Jennifer; Goss, Claudia

2011-11-01

Specialty care involves services provided by health professionals who focus on treating diseases affecting one body system. In contrast to primary care - aimed at providing continuous, comprehensive care - specialty care often involves intermittent episodes of care focused around specific medical conditions. In addition, it typically includes multiple providers who have unique areas of expertise that are important in supporting patients' care. Interprofessional care involves multiple professionals from different disciplines collaborating to provide an integrated approach to patient care. For patients to experience continuity of care across interprofessional providers, providers need to communicate and maintain a shared sense of responsibility to their patients. In this article, we describe challenges inherent in providing interprofessional patient decision support in specialty care. We propose ways for providers to engage in interprofessional decision support and discuss promising approaches to teaching an interprofessional decision support to specialty care providers. Additional evaluation and empirical research are required before further recommendations can be made about education for interprofessional decision support in specialty care.

Training for Online Teachers to Support Student Success: Themes from a Survey Administered to Teachers in Four Online Learning Programs

ERIC Educational Resources Information Center

Zweig, Jacqueline S.; Stafford, Erin T.

2016-01-01

In addition to teaching the subject matter, online teachers are tasked with supporting students' understanding of the online environment as well as students' progress, engagement, and interactions within the course. Yet only four states and the District of Columbia require teachers to receive training in online instruction prior to teaching a K-12…

Systems Engineering of Electric and Hybrid Vehicles

NASA Technical Reports Server (NTRS)

Kurtz, D. W.; Levin, R. R.

1986-01-01

Technical paper notes systems engineering principles applied to development of electric and hybrid vehicles such that system performance requirements support overall program goal of reduced petroleum consumption. Paper discusses iterative design approach dictated by systems analyses. In addition to obvious peformance parameters of range, acceleration rate, and energy consumption, systems engineering also considers such major factors as cost, safety, reliability, comfort, necessary supporting infrastructure, and availability of materials.

Applying the Miniature Dyna-Metric Model for Segmenting War Readiness Spares Kits: A User’s Guide

DTIC Science & Technology

1988-09-01

Reserve Materiel (WRM) concept. VRX is the extra, or additive, materiel required to augment peacetime assets to completely support the forces. missions...determines requirements for VRX through a number, of different forecasting systems, however the overall source of VRM authorizations, also called VRN...fluctuate as overall WRX spares requirements and funding change (32). Follow-on Spares Kits (FOSK) are in some ways a hybrid of both VRX and peacetime

Technical Review of Water-Resources Investigations of the Tule Desert, Lincoln County, Southern Nevada

USGS Publications Warehouse

Berger, David L.; Halford, Keith J.; Belcher, Wayne R.; Lico, Michael S.

2008-01-01

The Nevada State Engineer in Ruling No. 5181 required Lincoln County and Vidler Water Company, Inc., to provide results from additional water-resources studies of Tule Desert in southern Nevada to support water-rights application 64692. As outlined by the ruling, the additional studies were to include the determination of the amount of ground water available from the Tule Desert basin, ground-water recharge to the Tule Desert, and the direction of ground-water flow. Results of these additional studies were published in five reports prepared for Lincoln County and Vidler Water Company, Inc. The National Park Service formally requested that the U.S. Geological Survey provide technical reviews of these five reports. The Nevada State Engineer in Ruling No. 5181 required Lincoln County and Vidler Water Company, Inc., to provide results from additional water-resources studies of Tule Desert in southern Nevada to support water-rights application 64692. As outlined by the ruling, the additional studies were to include the determination of the amount of ground water available from the Tule Desert basin, ground-water recharge to the Tule Desert, and the direction of ground-water flow. Results of these additional studies were published in five reports prepared for Lincoln County and Vidler Water Company, Inc. The National Park Service formally requested that the U.S. Geological Survey provide technical reviews of these five reports.

Enviromnental Control and Life Support Systems for Mars Missions - Issues and Concerns for Planetary Protection

NASA Technical Reports Server (NTRS)

Barta, Daniel J.; Anderson, Molly S.; Lange, Kevin

2015-01-01

Planetary protection represents an additional set of requirements that generally have not been considered by developers of technologies for Environmental Control and Life Support Systems (ECLSS). Planetary protection guidelines will affect the kind of operations, processes, and functions that can take place during future human planetary exploration missions. Ultimately, there will be an effect on mission costs, including the mission trade space when planetary protection requirements begin to drive vehicle deisgn in a concrete way. Planetary protection requirements need to be considered early in technology development and mission programs in order to estimate these impacts and push back on requirements or find efficient ways to perform necessary functions. It is expected that planetary protection will be a significant factor during technology selection and system architecture design for future missions.

10 CFR 603.825 - Government approval of changes in plans.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Government approval of changes in plans. If it is an expenditure-based award, a TIA must require the... result in a need for additional Federal funding (this is unnecessary for a fixed-support TIA because the...

Reentry Vehicle On-Site Inspection Technology Study

DTIC Science & Technology

1994-11-01

masking Image Additional required* generated information required/wquied Pasive radiation Neutron scanning Neutron dose rate PNS Yes No SRS/BMO Yes...considerations for RVOSI techbologles. Inspection methods Instrument Setup Data Host support proximity time collection (m) (hr) time (hir) Pasive radiation...The unwillingness of our own services to allow equipment in close proximity to missile front ends is a matter which will have to be considered if a

LANDSAT-D conical scanner evaluation plan

NASA Technical Reports Server (NTRS)

Bilanow, S.; Chen, L. C. (Principal Investigator)

1982-01-01

The planned activities involved in the inflight sensor calibration and performance evaluation are discussed and the supporting software requirements are specified. The possible sensor error sources and their effects on sensor measurements are summarized. The methods by which the inflight sensor performance will be analyzed and the sensor modeling parameters will be calibrated are presented. In addition, a brief discussion on the data requirement for the study is provided.

A Rotary Microactuator Supported on Encapsulated Microball Bearings using an Electro-Pneumatic Thrust Balance

DTIC Science & Technology

2009-01-01

Additionally, high-speed air bearings have been demonstrated in micromotors (55 000 rpm) and micro-turbomachinery (2 million rpm) [7, 8]. While...without thrust balances [11]. For applications requiring continuous rotation ( micromotors and micropumps) this hydrostatic balancing force can be...conditions for stable actuation of the micromotor leading to maximum speeds. In addition to increased speed, this device demonstrates a substantial

Visual Purple, the Next Generation Crisis Management Decision Training Tool

DTIC Science & Technology

2001-09-01

talents of professional Hollywood screenwriters during the scripting and writing process of the simulations. Additionally, cinematic techniques learned...cultural, and language experts for research development. Additionally, GTA provides country specific support in script writing and cinematic resources as...The result is an entirely new dimension of realism that traditional exercises often fail to capture. The scenario requires the participant to make the

Data Management and the National Climate Assessment: Best Practices, Lessons Learned, and Future Applications: A Data Quality Solution

NASA Astrophysics Data System (ADS)

Kunkel, K.; Champion, S.

2015-12-01

Data Management and the National Climate Assessment: A Data Quality Solution Sarah M. Champion and Kenneth E. Kunkel Cooperative Institute for Climate and Satellites, Asheville, NC The Third National Climate Assessment (NCA), anticipated for its authoritative climate change analysis, was also a vanguard in climate communication. From the cutting-edge website to the organization of information, the Assessment content appealed to, and could be accessed by, many demographics. One such pivotal presentation of information in the NCA was the availability of complex metadata directly connected to graphical products. While the basic metadata requirement is federally mandated through a series of federal guidelines as a part of the Information Quality Act, the NCA is also deemed a Highly Influential Scientific Assessment, which requires demonstration of the transparency and reproducibility of the content. To meet these requirements, the Technical Support Unit (TSU) for the NCA embarked on building a system for collecting and presenting metadata that not only met these requirements, but one that has since been employed in support of additional Assessments. The metadata effort for this NCA proved invaluable for many reasons, one of which being that it showcased that there is a critical need for a culture change within the scientific community to support collection and transparency of data and methods to the level produced with the NCA. Irregardless of being federally mandated, it proves to simply be a good practice in science communication. This presentation will detail the collection system built by the TSU, the improvements employed with additional Assessment products, as well as illustrate examples of successful transparency. Through this presentation, we hope to impel the discussion in support of detailed metadata becoming the cultural norm within the scientific community to support influential and highly policy-relevant documents such as the NCA.

Novel Overhang Support Designs for Powder-Based Electron Beam Additive Manufacturing (EBAM)

NASA Technical Reports Server (NTRS)

Nabors, Sammy A.

2014-01-01

NASA Marshall Space Flight Center, in collaboration with the University of Alabama, has developed a contact-free support structure used to fabricate overhang-type geometries via EBAM. The support structure is used for 3-D metal-printed components for the aerospace, automotive, biomedical and other industries. Current techniques use support structures to address deformation challenges inherent in 3-D metal printing. However, these structures (overhangs) are bonded to the component and need to be removed in post-processing using a mechanical tool. This new technology improves the overhang support structure design for components by eliminating associated geometric defects and post-processing requirements.

Addressing tuberculosis patients' medical and socio-economic needs: a comprehensive programmatic approach.

PubMed

Contreras, Carmen C; Millones, Ana K; Santa Cruz, Janeth; Aguilar, Margot; Clendenes, Martin; Toranzo, Miguel; Llaro, Karim; Lecca, Leonid; Becerra, Mercedes C; Yuen, Courtney M

2017-04-01

For a cohort of patients with tuberculosis in Carabayllo, Peru, we describe the prevalence of medical comorbidities and socio-economic needs, the efforts required by a comprehensive support programme ('TB Cero') to address them and the success of this programme in linking patients to care. Patients diagnosed with tuberculosis in Carabayllo underwent evaluations for HIV, diabetes, mental health and unmet basic needs. For patients initiating treatment during 14 September, 2015-15 May, 2016, we abstracted data from evaluation forms and a support request system. We calculated the prevalence of medical comorbidities and the need for socio-economic support at the time of tuberculosis diagnosis, as well as the proportion of patients successfully linked to care or support. Of 192 patients, 83 (43%) had at least one medical comorbidity other than tuberculosis. These included eight (4%) patients with HIV, 12 (6%) with diabetes and 62 (32%) deemed at risk for a mental health condition. Of patients who required follow-up for a comorbidity, 100% initiated antiretroviral therapy, 71% attended endocrinology consultations and 66% attended psychology consultations. Of 126 (65%) patients who completed the socio-economic evaluation, 58 (46%) reported already receiving food baskets from the municipality, and 79 (63%) were given additional support, most commonly food vouchers and assistance in accessing health care. Carabayllo tuberculosis patients face many challenges in addition to tuberculosis. A collaborative, comprehensive treatment support programme can achieve high rates of linkage to care for these needs. © 2017 John Wiley & Sons Ltd.

Space Shuttle Flight Support Motor no. 1 (FSM-1)

NASA Technical Reports Server (NTRS)

Hughes, Phil D.

1990-01-01

Space Shuttle Flight Support Motor No. 1 (FSM-1) was static test fired on 15 Aug. 1990 at the Thiokol Corporation Static Test Bay T-24. FSM-1 was a full-scale, full-duration static test fire of a redesigned solid rocket motor. FSM-1 was the first of seven flight support motors which will be static test fired. The Flight Support Motor program validates components, materials, and manufacturing processes. In addition, FSM-1 was the full-scale motor for qualification of Western Electrochemical Corporation ammonium perchlorate. This motor was subjected to all controls and documentation requirements CTP-0171, Revision A. Inspection and instrumentation data indicate that the FSM-1 static test firing was successful. The ambient temperature during the test was 87 F and the propellant mean bulk temperature was 82 F. Ballistics performance values were within the specified requirements. The overall performance of the FSM-1 components and test equipment was nominal.

Requirements for guidelines systems: implementation challenges and lessons from existing software-engineering efforts.

PubMed

Shah, Hemant; Allard, Raymond D; Enberg, Robert; Krishnan, Ganesh; Williams, Patricia; Nadkarni, Prakash M

2012-03-09

A large body of work in the clinical guidelines field has identified requirements for guideline systems, but there are formidable challenges in translating such requirements into production-quality systems that can be used in routine patient care. Detailed analysis of requirements from an implementation perspective can be useful in helping define sub-requirements to the point where they are implementable. Further, additional requirements emerge as a result of such analysis. During such an analysis, study of examples of existing, software-engineering efforts in non-biomedical fields can provide useful signposts to the implementer of a clinical guideline system. In addition to requirements described by guideline-system authors, comparative reviews of such systems, and publications discussing information needs for guideline systems and clinical decision support systems in general, we have incorporated additional requirements related to production-system robustness and functionality from publications in the business workflow domain, in addition to drawing on our own experience in the development of the Proteus guideline system (http://proteme.org). The sub-requirements are discussed by conveniently grouping them into the categories used by the review of Isern and Moreno 2008. We cite previous work under each category and then provide sub-requirements under each category, and provide example of similar work in software-engineering efforts that have addressed a similar problem in a non-biomedical context. When analyzing requirements from the implementation viewpoint, knowledge of successes and failures in related software-engineering efforts can guide implementers in the choice of effective design and development strategies.

Requirements for guidelines systems: implementation challenges and lessons from existing software-engineering efforts

PubMed Central

2012-01-01

Background A large body of work in the clinical guidelines field has identified requirements for guideline systems, but there are formidable challenges in translating such requirements into production-quality systems that can be used in routine patient care. Detailed analysis of requirements from an implementation perspective can be useful in helping define sub-requirements to the point where they are implementable. Further, additional requirements emerge as a result of such analysis. During such an analysis, study of examples of existing, software-engineering efforts in non-biomedical fields can provide useful signposts to the implementer of a clinical guideline system. Methods In addition to requirements described by guideline-system authors, comparative reviews of such systems, and publications discussing information needs for guideline systems and clinical decision support systems in general, we have incorporated additional requirements related to production-system robustness and functionality from publications in the business workflow domain, in addition to drawing on our own experience in the development of the Proteus guideline system (http://proteme.org). Results The sub-requirements are discussed by conveniently grouping them into the categories used by the review of Isern and Moreno 2008. We cite previous work under each category and then provide sub-requirements under each category, and provide example of similar work in software-engineering efforts that have addressed a similar problem in a non-biomedical context. Conclusions When analyzing requirements from the implementation viewpoint, knowledge of successes and failures in related software-engineering efforts can guide implementers in the choice of effective design and development strategies. PMID:22405400

The X-15/HL-20 operations support comparison

NASA Technical Reports Server (NTRS)

Morris, W. Douglas

1993-01-01

During the 1960's, the United States X-15 rocket-plane research program successfully demonstrated the ability to support a reusable vehicle operating in a near-space environment. The similarity of the proposed HL-20 lifting body concept in general size, weight, and subsystem composition to that of the X-15 provided an opportunity for a comparison of the predicted support manpower and turnaround times with those experienced in the X-15 program. Information was drawn from both reports and discussions with X-15 program personnel to develop comparative operations and support data. Based on the assumption of comparability between the two systems, the predicted staffing levels, skill mix, and refurbishment times of an operational HL-20 appear to be similar to those experienced by the X-15 for ground support. However, safety, environmental, and support requirements have changed such that the HL-20 will face a different operating environment than existed at Edwards during the 1950's and 1960's. Today's operational standards may impose additional requirements on the HL-20 that will add to the maintenance and support burden estimate based on the X-15 analogy.

Cost accounting in health care: fad or fundamental?

PubMed

Kaskiw, E A; Hanlon, P; Wulf, P

1987-11-01

The drastic changes in the environment affecting hospitals have caused management to look toward capturing and reporting cost information to make decisions. These decisions will, in part, shape the way hospitals continue to do business. This article focuses on the data requirements necessary to support product and operational management decisions facing today's hospitals. In addition, the difference in data needed to support product and operational management is explored.

Initiatives and resources to promote antimicrobial stewardship.

PubMed

Paño-Pardo, José Ramón; Campos, José; Natera Kindelán, Clara; Ramos, Antonio

2013-09-01

The development of an antimicrobial stewardship program (ASP) requires institutional support. However, obtaining sufficient institutional support is often a complex task that requires convincing the hospital's managers of the benefits of these programs. Additionally, in the design and implementation of an ASP, antimicrobial stewardship (AS) leaders need tools for diverse purposes, such as measuring antimicrobial consumption, education and training and designing protocols. In this review we provide useful information for AS promoters to facilitate the task of designing and implementing an ASP. First, we summarize information about various institutions that promote AS and include evidence that supports the need for and benefits of these programs. Then, several campaigns promoting AS are described. Finally, online resources for professionals dealing with AS are briefly summarized. Copyright © 2013 Elsevier España, S.L. All rights reserved.

The Requirements Generation System: A tool for managing mission requirements

NASA Technical Reports Server (NTRS)

Sheppard, Sylvia B.

1994-01-01

Historically, NASA's cost for developing mission requirements has been a significant part of a mission's budget. Large amounts of time have been allocated in mission schedules for the development and review of requirements by the many groups who are associated with a mission. Additionally, tracing requirements from a current document to a parent document has been time-consuming and costly. The Requirements Generation System (RGS) is a computer-supported cooperative-work tool that assists mission developers in the online creation, review, editing, tracing, and approval of mission requirements as well as in the production of requirements documents. This paper describes the RGS and discusses some lessons learned during its development.

SIENA Customer Problem Statement and Requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

L. Sauer; R. Clay; C. Adams

2000-08-01

This document describes the problem domain and functional requirements of the SIENA framework. The software requirements and system architecture of SIENA are specified in separate documents (called SIENA Software Requirement Specification and SIENA Software Architecture, respectively). While currently this version of the document describes the problems and captures the requirements within the Analysis domain (concentrating on finite element models), it is our intention to subsequent y expand this document to describe problems and capture requirements from the Design and Manufacturing domains. In addition, SIENA is designed to be extendible to support and integrate elements from the other domains (see SIENAmore » Software Architecture document).« less

An approach to efficient mobility management in intelligent networks

NASA Technical Reports Server (NTRS)

Murthy, K. M. S.

1995-01-01

Providing personal communication systems supporting full mobility require intelligent networks for tracking mobile users and facilitating outgoing and incoming calls over different physical and network environments. In realizing the intelligent network functionalities, databases play a major role. Currently proposed network architectures envision using the SS7-based signaling network for linking these DB's and also for interconnecting DB's with switches. If the network has to support ubiquitous, seamless mobile services, then it has to support additionally mobile application parts, viz., mobile origination calls, mobile destination calls, mobile location updates and inter-switch handovers. These functions will generate significant amount of data and require them to be transferred between databases (HLR, VLR) and switches (MSC's) very efficiently. In the future, the users (fixed or mobile) may use and communicate with sophisticated CPE's (e.g. multimedia, multipoint and multisession calls) which may require complex signaling functions. This will generate volumness service handling data and require efficient transfer of these message between databases and switches. Consequently, the network providers would be able to add new services and capabilities to their networks incrementally, quickly and cost-effectively.

Water Recovery System Design to Accommodate Dormant Periods for Manned Missions

NASA Technical Reports Server (NTRS)

Tabb, David; Carter, Layne

2015-01-01

Future manned missions beyond lower Earth orbit may include intermittent periods of extended dormancy. Under the NASA Advanced Exploration System (AES) project, NASA personnel evaluated the viability of the ISS Water Recovery System (WRS) to support such a mission. The mission requirement includes the capability for life support systems to support crew activity, followed by a dormant period of up to one year, and subsequently for the life support systems to come back online for additional crewed missions. Dormancy could be a critical issue due to concerns with microbial growth or chemical degradation that might prevent water systems from operating properly when the crewed mission began. As such, it is critical that the water systems be designed to accommodate this dormant period. This paper details the results of this evaluation, which include identification of dormancy issues, results of testing performed to assess microbial stability of pretreated urine during dormancy periods, and concepts for updating to the WRS architecture and operational concepts that will enable the ISS WRS to support the dormancy requirement.

A Modular, Reusable Latch and Decking System for Securing Payloads During Launch and Planetary Surface Transport

NASA Technical Reports Server (NTRS)

Doggett, William R.; Dorsey, John T.; Jones, Thomas C.; King, Bruce D.; Mikulas, Martin M.

2011-01-01

Efficient handling of payloads destined for a planetary surface, such as the moon or mars, requires robust systems to secure the payloads during transport on the ground, in space and on the planetary surface. In addition, mechanisms to release the payloads need to be reliable to ensure successful transfer from one vehicle to another. An efficient payload handling strategy must also consider the devices available to support payload handling. Cranes used for overhead lifting are common to all phases of payload handling on Earth. Similarly, both recent and past studies have demonstrated that devices with comparable functionality will be needed to support lunar outpost operations. A first generation test-bed of a new high performance device that provides the capabilities of both a crane and a robotic manipulator, the Lunar Surface Manipulation System (LSMS), has been designed, built and field tested and is available for use in evaluating a system to secure payloads to transportation vehicles. A payload handling approach must address all phases of payload management including: ground transportation, launch, planetary transfer and installation in the final system. In addition, storage may be required during any phase of operations. Each of these phases requires the payload to be lifted and secured to a vehicle, transported, released and lifted in preparation for the next transportation or storage phase. A critical component of a successful payload handling approach is a latch and associated carrier system. The latch and carrier system should minimize requirements on the: payload, carrier support structure and payload handling devices as well as be able to accommodate a wide range of payload sizes. In addition, the latch should; be small and lightweight, support a method to apply preload, be reusable, integrate into a minimal set of hard-points and have manual interfaces to actuate the latch should a problem occur. A latching system which meets these requirements has been designed and fabricated and will be described in detail. This latching system works in conjunction with a payload handling device such as the LSMS, and the LSMS has been used to test first generation latch and carrier hardware. All tests have been successful during the first phase of operational evaluations. Plans for future tests of first generation latch and carrier hardware with the LSMS are also described.

A Modular, Reusable Latch and Decking System for Securing Payloads During Launch and Planetary Surface Transport

NASA Technical Reports Server (NTRS)

Doggett, William R.; Dorsey, John T.; Jones, Thomas C.; King, Bruce D.; Mikulas, Martin M.

2010-01-01

Efficient handling of payloads destined for a planetary surface, such as the moon or Mars, requires robust systems to secure the payloads during transport on the ground, in-space and on the planetary surface. In addition, mechanisms to release the payloads need to be reliable to ensure successful transfer from one vehicle to another. An efficient payload handling strategy must also consider the devices available to support payload handling. Cranes used for overhead lifting are common to all phases of payload handling on Earth. Similarly, both recent and past studies have demonstrated that devices with comparable functionality will be needed to support lunar outpost operations. A first generation test-bed of a new high performance device that provides the capabilities of both a crane and a robotic manipulator, the Lunar Surface Manipulation System (LSMS), has been designed, built and field tested and is available for use in evaluating a system to secure payloads to transportation vehicles. National Institute of Aerospace, Hampton Va 23662 A payload handling approach must address all phases of payload management including: ground transportation, launch, planetary transfer and installation in the final system. In addition, storage may be required during any phase of operations. Each of these phases requires the payload to be lifted and secured to a vehicle, transported, released and lifted in preparation for the next transportation or storage phase. A critical component of a successful payload handling approach is a latch and associated carrier system. The latch and carrier system should minimize requirements on the: payload, carrier support structure and payload handling devices as well as be able to accommodate a wide range of payload sizes. In addition, the latch should; be small and lightweight, support a method to apply preload, be reusable, integrate into a minimal set of hard-points and have manual interfaces to actuate the latch should a problem occur. A latching system which meets these requirements has been designed and fabricated and will be described in detail. This latching system works in conjunction with a payload handling device such as the LSMS, and the LSMS has been used to test first generation latch and carrier hardware. All tests have been successful during the first phase of operational evaluations. Plans for future tests of first generation latch and carrier hardware with the LSMS are also described.

Semantic Clinical Guideline Documents

PubMed Central

Eriksson, Henrik; Tu, Samson W.; Musen, Mark

2005-01-01

Decision-support systems based on clinical practice guidelines can support physicians and other health-care personnel in the process of following best practice consistently. A knowledge-based approach to represent guidelines makes it possible to encode computer-interpretable guidelines in a formal manner, perform consistency checks, and use the guidelines directly in decision-support systems. Decision-support authors and guideline users require guidelines in human-readable formats in addition to computer-interpretable ones (e.g., for guideline review and quality assurance). We propose a new document-oriented information architecture that combines knowledge-representation models with electronic and paper documents. The approach integrates decision-support modes with standard document formats to create a combined clinical-guideline model that supports on-line viewing, printing, and decision support. PMID:16779037

Additional Interventions to Enhance the Effectiveness of Individual Placement and Support: A Rapid Evidence Assessment

PubMed Central

Boycott, Naomi; Schneider, Justine; McMurran, Mary

2012-01-01

Topic. Additional interventions used to enhance the effectiveness of individual placement and support (IPS). Aim. To establish whether additional interventions improve the vocational outcomes of IPS alone for people with severe mental illness. Method. A rapid evidence assessment of the literature was conducted for studies where behavioural or psychological interventions have been used to supplement standard IPS. Published and unpublished empirical studies of IPS with additional interventions were considered for inclusion. Conclusions. Six published studies were found which compared IPS alone to IPS plus a supplementary intervention. Of these, three used skills training and three used cognitive remediation. The contribution of each discrete intervention is difficult to establish. Some evidence suggests that work-related social skills and cognitive training are effective adjuncts, but this is an area where large RCTs are required to yield conclusive evidence. PMID:22685665

U.S. Army Military Police: The Force of Choice for Defense Support to Civil Authorities

DTIC Science & Technology

2014-05-22

nearly identical to the qualifications and standards required for first responders and emergency managers. Additionally, within a military police...and first responders requires trust and a common professional language. Through the Police Officer Standards and Training program and Federal Law...away some of their own precious free time to review my work. The excellent research librarians at the Combined Arms Research Library were invaluable

76 FR 35398 - Scoria Mining Addition, Medicine Bow-Routt National Forests and Thunder Basin National Grassland...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-17

... material is available for road construction and maintenance in order to support required maintenance and... 20 acres in any given year, for the purpose of using that scoria on adjacent roads needed for coal...

Space transfer vehicle concepts and requirements, volume 2, book 1

NASA Technical Reports Server (NTRS)

1991-01-01

The objective of the systems engineering task was to develop and implement an approach that would generate the required study products as defined by program directives. This product list included a set of system and subsystem requirements, a complete set of optimized trade studies and analyses resulting in a recommended system configuration, and the definition of an integrated system/technology and advanced development growth path. A primary ingredient in the approach was the TQM philosophy stressing job quality from the inception. Included throughout the Systems Engineering, Programmatics, Concepts, Flight Design, and Technology sections are data supporting the original objectives as well as supplemental information resulting from program activities. The primary result of the analyses and studies was the recommendation of a single propulsion stage Lunar Transportation System (LTS) configuration that supports several different operations scenarios with minor element changes. This concept has the potential to support two additional scenarios with complex element changes. The space based LTS concept consists of three primary configurations--Piloted, Reusable Cargo, and Expendable Cargo.

A closed life-support system for space colonies

NASA Technical Reports Server (NTRS)

Johnson, R. D.; Jebens, H. J.; Sweet, H. C.

1977-01-01

In 1975, a system design study was performed to examine a completely self-contained system for a permanent colony of 10,000 inhabitants in space. Fundamental to this design was the life support system. Since resupply from earth is prohibitive in transportation costs, it was decided to use a closed system with the initial supply of oxygen coming from processing of lunar ores, and the supply of carbon, nitrogen and hydrogen from earth. The problem of life support was treated starting with the nutritional and metabolic requirements for the human population, creating a food and water chain sufficient to supply these demands, adding the additional requirements for the animal and plant sources in the food chain, feeding back useful waste products, supplying water as required from different sources, and closing the loop by processing organic wastes into CO2. This concept places the burden of the system upon plants for O2 generation and waste processing the CO2 generation.

Support for a comprehensive background check requirement and expanded denial criteria for firearm transfers: findings from the firearms licensee survey.

PubMed

Wintemute, Garen J

2014-04-01

Federal and state policies on eligibility to purchase and possess firearms and background check requirements for firearm transfers are undergoing intensive review and, in some cases, modification. Our objective in this third report from the Firearms Licensee Survey (FLS) is to assess support among federally licensed firearms retailers (gun dealers and pawnbrokers) for a background check requirement on all firearm transfers and selected criteria for denying the purchase of handguns based on criminal convictions, alcohol abuse, and serious mental illness. The FLS was conducted by mail during June-August, 2011 on a random sample of 1,601 licensed dealers and pawnbrokers in 43 states who were believed to sell at least 50 firearms annually. The response rate was 36.9%, typical of establishment surveys using such methods. Most respondents (55.4%) endorsed a comprehensive background check requirement; 37.5% strongly favored it. Support was more common and stronger among pawnbrokers than dealers and among respondents who believed that "it is too easy for criminals to get guns." Support was positively associated with many establishment characteristics, including sales of inexpensive handguns, sales that were denied when the purchasers failed background checks, and sales of firearms that were later subjected to ownership tracing, and were negatively associated with sales at gun shows. Support for three existing and nine potential criteria for denial of handgun purchase involving criminal activity, alcohol abuse, and mental illness exceeded 90% in six cases and fell below 2/3 in one. Support again increased with sales of inexpensive handguns and denied sales and decreased with sales of tactical (assault-type) rifles. In this survey, which was conducted prior to mass shootings in Aurora, Colorado; Oak Creek, Wisconsin; Newtown, Connecticut; and elsewhere, licensed firearm sellers exhibited moderate support for a comprehensive background check requirement and very strong support for additional criteria for denial of handgun purchases. In both cases, support was associated with the intensity of respondents' exposure to illegal activities.

UCSC genome browser: deep support for molecular biomedical research.

PubMed

Mangan, Mary E; Williams, Jennifer M; Lathe, Scott M; Karolchik, Donna; Lathe, Warren C

2008-01-01

The volume and complexity of genomic sequence data, and the additional experimental data required for annotation of the genomic context, pose a major challenge for display and access for biomedical researchers. Genome browsers organize this data and make it available in various ways to extract useful information to advance research projects. The UCSC Genome Browser is one of these resources. The official sequence data for a given species forms the framework to display many other types of data such as expression, variation, cross-species comparisons, and more. Visual representations of the data are available for exploration. Data can be queried with sequences. Complex database queries are also easily achieved with the Table Browser interface. Associated tools permit additional query types or access to additional data sources such as images of in situ localizations. Support for solving researcher's issues is provided with active discussion mailing lists and by providing updated training materials. The UCSC Genome Browser provides a source of deep support for a wide range of biomedical molecular research (http://genome.ucsc.edu).

Impact of High-Fidelity Simulation and Pharmacist-Specific Didactic Lectures in Addition to ACLS Provider Certification on Pharmacy Resident ACLS Performance.

PubMed

Bartel, Billie J

2014-08-01

This pilot study explored the use of multidisciplinary high-fidelity simulation and additional pharmacist-focused training methods in training postgraduate year 1 (PGY1) pharmacy residents to provide Advanced Cardiovascular Life Support (ACLS) care. Pharmacy resident confidence and comfort level were assessed after completing these training requirements. The ACLS training requirements for pharmacy residents were revised to include didactic instruction on ACLS pharmacology and rhythm recognition and participation in multidisciplinary high-fidelity simulation ACLS experiences in addition to ACLS provider certification. Surveys were administered to participating residents to assess the impact of this additional education on resident confidence and comfort level in cardiopulmonary arrest situations. The new ACLS didactic and simulation training requirements resulted in increased resident confidence and comfort level in all assessed functions. Residents felt more confident in all areas except providing recommendations for dosing and administration of medications and rhythm recognition after completing the simulation scenarios than with ACLS certification training and the didactic components alone. All residents felt the addition of lectures and simulation experiences better prepared them to function as a pharmacist in the ACLS team. Additional ACLS training requirements for pharmacy residents increased overall awareness of pharmacist roles and responsibilities and greatly improved resident confidence and comfort level in performing most essential pharmacist functions during ACLS situations. © The Author(s) 2013.

Critical Compressive Stress for Flat Rectangular Plates Supported Along All Edges and Elastically Restrained Against Rotation along the Unloaded Edges

NASA Technical Reports Server (NTRS)

Lundquist, Eugene E; Stowell, Elbridge Z

1942-01-01

A chart is presented for the values of the coefficient in the formula for the critical compressive stress at which buckling may be expected to occur in flat rectangular plates supported along all edges and, in addition, elastically restrained against rotation along the unloaded edges. The mathematical derivations of the formulas required in the construction of the chart are given.

Impacts of Inverter-Based Advanced Grid Support Functions on Islanding Detection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, Austin; Hoke, Anderson; Miller, Brian

A long-standing requirement for inverters paired with distributed energy resources is that they are required to disconnect from the electrical power system (EPS) when an electrical island is formed. In recent years, advanced grid support controls have been developed for inverters to provide voltage and frequency support by integrating functions such as voltage and frequency ride-through, volt-VAr control, and frequency-Watt control. With these new capabilities integrated into the inverter, additional examination is needed to determine how voltage and frequency support will impact pre-existing inverter functions like island detection. This paper inspects how advanced inverter functions will impact its ability tomore » detect the formation of an electrical island. Results are presented for the unintentional islanding laboratory tests of three common residential-scale photovoltaic inverters performing various combinations of grid support functions. For the inverters tested, grid support functions prolonged island disconnection times slightly; however, it was found that in all scenarios the inverters disconnected well within two seconds, the limit imposed by IEEE Std 1547-2003.« less

Science on Drupal: An evaluation of CMS Technologies

NASA Astrophysics Data System (ADS)

Vinay, S.; Gonzalez, A.; Pinto, A.; Pascuzzi, F.; Gerard, A.

2011-12-01

We conducted an extensive evaluation of various Content Management System (CMS) technologies for implementing different websites supporting interdisciplinary science data and information. We chose two products, Drupal and Bluenog/Hippo CMS, to meet our specific needs and requirements. Drupal is an open source product that is quick and easy to setup and use. It is a very mature, stable, and widely used product. It has rich functionality supported by a large and active user base and developer community. There are many plugins available that provide additional features for managing citations, map gallery, semantic search, digital repositories (fedora), scientific workflows, collaborative authoring, social networking, and other functions. All of these work very well within the Drupal framework if minimal customization is needed. We have successfully implemented Drupal for multiple projects such as: 1) the Haiti Regeneration Initiative (http://haitiregeneration.org/); 2) the Consortium on Climate Risk in the Urban Northeast (http://beta.ccrun.org/); and 3) the Africa Soils Information Service (http://africasoils.net/). We are also developing two other websites, the Côte Sud Initiative (CSI) and Emerging Infectious Diseases, using Drupal. We are testing the Drupal multi-site install for managing different websites with one install to streamline the maintenance. In addition, paid support and consultancy for Drupal website development are available at affordable prices. All of these features make Drupal very attractive for implementing state-of-the-art scientific websites that do not have complex requirements. One of our major websites, the NASA Socioeconomic Data and Applications Center (SEDAC), has a very complex set of requirements. It has to easily re-purpose content across multiple web pages and sites with different presentations. It has to serve the content via REST or similar standard interfaces so that external client applications can access content in the CMS repository. This means the content repository and structure should be completely separated from the content presentation and site structure. In addition to the CMS repository, the front-end website has to be able to consume, integrate, and display diverse content flexibly from multiple back-end systems, including custom and legacy systems, such as Oracle, Geoserver, Flickr, Fedora, and other web services. We needed the ability to customize the workflow to author, edit, approve, and publish content based on different content types and project requirements. In addition, we required the ability to use the existing active directory for user management with support for roles and groups and permissions using Access Control List (ACL) model. The ability to version and lock content was also important. We determined that most of these capabilities are difficult to implement with Drupal and needed significant customization. The Bluenog eCMS (enterprise CMS) product satisfied most of these requirements. Bluenog eCMS is based on an open source product called Hippo with customizations and support provided by the vendor Bluenog. Our newly redesigned and recently released SEDAC website, http://sedac.ciesin.columbia.edu, is implemented using Bluenog eCMS. Other products we evaluated include WebLogic portal, Magnolia, Liferay portal, and Alfresco.

Development of Airport Surface Required Navigation Performance (RNP)

NASA Technical Reports Server (NTRS)

Cassell, Rick; Smith, Alex; Hicok, Dan

1999-01-01

The U.S. and international aviation communities have adopted the Required Navigation Performance (RNP) process for defining aircraft performance when operating the en-route, approach and landing phases of flight. RNP consists primarily of the following key parameters - accuracy, integrity, continuity, and availability. The processes and analytical techniques employed to define en-route, approach and landing RNP have been applied in the development of RNP for the airport surface. To validate the proposed RNP requirements several methods were used. Operational and flight demonstration data were analyzed for conformance with proposed requirements, as were several aircraft flight simulation studies. The pilot failure risk component was analyzed through several hypothetical scenarios. Additional simulator studies are recommended to better quantify crew reactions to failures as well as additional simulator and field testing to validate achieved accuracy performance, This research was performed in support of the NASA Low Visibility Landing and Surface Operations Programs.

Step 1: C3 Flight Demo Data Analysis Plan

NASA Technical Reports Server (NTRS)

2005-01-01

The Data Analysis Plan (DAP) describes the data analysis that the C3 Work Package (WP) will perform in support of the Access 5 Step 1 C3 flight demonstration objectives as well as the processes that will be used by the Flight IPT to gather and distribute the data collected to satisfy those objectives. In addition to C3 requirements, this document will encompass some Human Systems Interface (HSI) requirements in performing the C3 flight demonstrations. The C3 DAP will be used as the primary interface requirements document between the C3 Work Package and Flight Test organizations (Flight IPT and Non-Access 5 Flight Programs). In addition to providing data requirements for Access 5 flight test (piggyback technology demonstration flights, dedicated C3 technology demonstration flights, and Airspace Operations Demonstration flights), the C3 DAP will be used to request flight data from Non- Access 5 flight programs for C3 related data products

Humanoid Flight Metabolic Simulator Project

NASA Technical Reports Server (NTRS)

Ross, Stuart

2015-01-01

NASA's Evolvable Mars Campaign (EMC) has identified several areas of technology that will require significant improvements in terms of performance, capacity, and efficiency, in order to make a manned mission to Mars possible. These include crew vehicle Environmental Control and Life Support System (ECLSS), EVA suit Portable Life Support System (PLSS) and Information Systems, autonomous environmental monitoring, radiation exposure monitoring and protection, and vehicle thermal control systems (TCS). (MADMACS) in a Suit can be configured to simulate human metabolism, consuming crew resources (oxygen) in the process. In addition to providing support for testing Life Support on unmanned flights, MADMACS will also support testing of suit thermal controls, and monitor radiation exposure, body zone temperatures, moisture, and loads.

Can Hypocaloric, High-Protein Nutrition Support Be Used in Complicated Bariatric Patients to Promote Weight Loss?

PubMed

Beebe, Mara Lee; Crowley, Nina

2015-08-01

Bariatric surgery, an effective treatment for morbid obesity, may result in complications that require nutrition support. Common goals for nutrition support in post-bariatric surgery patients include nutrition repletion, avoiding overfeeding, preserving lean body mass, and promoting wound healing. It is often questioned if continued weight loss can be part of the nutrition goals and if weight loss is safe for patients who become critically ill following bariatric surgery. Recent clinical practice guidelines from both the American Society for Parenteral and Enteral Nutrition (A.S.P.E.N.) and Society of Critical Care Medicine (SCCM) have recommended the use of hypocaloric, high-protein nutrition support in both critically and non-critically ill obese patients. Hypocaloric feedings of 50%-70% of estimated energy requirements based on predictive equations or <14 kcal/kg actual body weight, as well as high-protein feedings of 1.2 g/kg actual weight or 2-2.5 g/kg ideal body weight, are suggested by A.S.P.E.N. in the 2013 clinical guidelines for nutrition support of hospitalized adult patients with obesity. Two small studies in complicated post-bariatric surgery patients requiring nutrition support have shown that the strategy of hypocaloric, high-protein feedings can result in positive outcomes, including positive nitrogen balance, wound healing, weight loss, and successful transition to oral diets. Additional research, including large, randomized studies, is still needed to validate these findings. However, based on a review of available clinical practice guidelines, predictive equations, indirect calorimetry, case studies, and systematic reviews, hypocaloric, high-protein nutrition support appears to at least be equal to eucaloric feedings and may be a useful tool for clinicians to achieve continued weight loss in complicated bariatric surgery patients requiring nutrition support. © 2015 American Society for Parenteral and Enteral Nutrition.

13 CFR 307.17 - Uses of capital.

Code of Federal Regulations, 2010 CFR

2010-01-01

... refinancing will support additional capital investment intended to increase business activities). For this... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Uses of capital. 307.17 Section... ECONOMIC ADJUSTMENT ASSISTANCE INVESTMENTS Special Requirements for Revolving Loan Funds and Use of Grant...

29 CFR 1902.40 - Informal hearing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... conducted under this section shall be legislative in type. However, fairness may require an opportunity for... informal and legislative in type, this section is intended to provide more than the bare essentials of... written recommendations with supporting reasons and any additional data, views, and arguments from any...

State Funding Mechanisms for English Language Learners

ERIC Educational Resources Information Center

Millard, Maria

2015-01-01

Research is clear that English language learners (ELLs) perform better academically and achieve greater language proficiency when they have high-quality English language instruction.1 Like all supplemental services, these necessary supports require additional funding above the average per-student amount. The federal government provides grant…

77 FR 76435 - Connect America Fund

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-28

... excluding Phase I fiber from Phase II support is that the Bureau would not likely receive information... carriers should be restricted in building fiber, what information carriers should be required to provide... additional information on the rulemaking process, see the SUPPLEMENTARY INFORMATION section of this document...

The 25 kW power module evolution study. Part 2: Payload supports system evolution

NASA Technical Reports Server (NTRS)

1978-01-01

The addition of system elements for the 25 kW power module and logical evolutionary paths, by discrete growth stages, to provide capability for accommodating the increasing mission requirements through the early 1990's within reasonable resources are conceptualized.

Warning Alert HITL Experiment Results

NASA Technical Reports Server (NTRS)

Monk, Kevin J.; Ferm, Lisa; Roberts, Zach

2018-01-01

Minimum Operational Performance Standards (MOPS) are being developed to support the integration of Unmanned Aircraft Systems (UAS) in the National Airspace (NAS). Input from subject matter experts and multiple research studies have informed display requirements for Detect-and-Avoid (DAA) systems aimed at supporting timely and appropriate pilot responses to collision hazards. Phase 1 DAA MOPS alerting is designed to inform pilots if an avoidance maneuver is necessary; the two highest alert levels - caution and warning - indicate how soon pilot action is required and whether there is adequate time to coordinate with the air traffic controller (ATC). Additional empirical support is needed to clarify the extent to which warning-level alerting impacts DAA task performance. The present study explores the differential effects of the auditory and visual cues provided by the DAA Warning alert, and performance implications compared to caution-only alerting are discussed.

Telephone helplines as a source of support for eating disorders: Service user, carer, and health professional perspectives.

PubMed

Prior, Amie-Louise; Woodward, Debbie; Hoefkens, Toni; Clayton, Debbie; Thirlaway, Katie; Limbert, Caroline

2018-01-01

Access to care for eating disorders can be problematic for numerous reasons including lack of understanding and delays with treatment referrals. Previous research has highlighted the benefits of telephone helplines as an accessible source of support for those who may not wish to access face-to-face support or to fill a gap for those waiting for treatment. This study aimed to gain an insight into the perspectives of those who may use or refer others to a telephone helpline in order to identify the requirements of such a service. Triangulation of service user, carer and health professionals' perspectives resulted in identification of themes relating to the type of support, delivery and practicalities of a helpline. The findings indicated that telephone helplines may offer numerous benefits for individuals with an eating disorder, whether accessed as a first step, alongside treatment or as an extension of this support when in recovery. Additionally helplines may provide an opportunity for carers to access information and discuss their own experiences, while supporting their loved one. Raising awareness of these services is important to encourage those affected by an eating disorder to access and make the most of this type of support. These findings offer an insight into the key requirements for new and existing service development with regard to both the type of support and the method of communication required by individuals with eating disorders.

Advanced instrumentation: Technology database enhancement, volume 4, appendix G

NASA Technical Reports Server (NTRS)

1991-01-01

The purpose of this task was to add to the McDonnell Douglas Space Systems Company's Sensors Database, including providing additional information on the instruments and sensors applicable to physical/chemical Environmental Control and Life Support System (P/C ECLSS) or Closed Ecological Life Support System (CELSS) which were not previously included. The Sensors Database was reviewed in order to determine the types of data required, define the data categories, and develop an understanding of the data record structure. An assessment of the MDSSC Sensors Database identified limitations and problems in the database. Guidelines and solutions were developed to address these limitations and problems in order that the requirements of the task could be fulfilled.

Development of Carbon Dioxide Removal Systems for NASA's Deep Space Human Exploration Missions 2016-2017

NASA Technical Reports Server (NTRS)

Knox, James C.

2017-01-01

NASA has embarked on an endeavor that will enable humans to explore deep space, with the ultimate goal of sending humans to Mars. This journey will require significant developments in a wide range of technical areas, as resupply is unavailable in the Mars transit phase and early return is not possible. Additionally, mass, power, volume, and other resources must be minimized for all subsystems to reduce propulsion needs. Among the critical areas identified for development are life support systems, which will require increases in reliability and reductions in resources. This paper discusses current and planned developments in the area of carbon dioxide removal to support crewed Mars-class missions.

Thin client performance for remote 3-D image display.

PubMed

Lai, Albert; Nieh, Jason; Laine, Andrew; Starren, Justin

2003-01-01

Several trends in biomedical computing are converging in a way that will require new approaches to telehealth image display. Image viewing is becoming an "anytime, anywhere" activity. In addition, organizations are beginning to recognize that healthcare providers are highly mobile and optimal care requires providing information wherever the provider and patient are. Thin-client computing is one way to support image viewing this complex environment. However little is known about the behavior of thin client systems in supporting image transfer in modern heterogeneous networks. Our results show that using thin-clients can deliver acceptable performance over conditions commonly seen in wireless networks if newer protocols optimized for these conditions are used.

Shuttle GPS R/PA evaluation analysis and performance tradeoff study

NASA Technical Reports Server (NTRS)

Booth, R. W. D.; Lindsey, W. C.

1978-01-01

Primary responsibility was understanding and analyzing the various GPS receiver functions as they relate to the shuttle environment. These receiver functions included acquisition properties of the sequential detector, acquisition and tracking properties of the various receiver phase locked loops, and the techniques of sequential receiver operation. In addition to these areas, support was provided in the areas of oscillator stability requirements, antenna management, and navigation filter requirements, including preposition aiding.

An Evaluation of the Network Efficiency Required in Order to Support Multicast and Synchronous Distributed Learning Network Traffic

DTIC Science & Technology

2003-09-01

This restriction limits the deployment to small and medium sized enterprises. The Internet cannot universally use DVMRP for this reason. In addition...20503. 1. AGENCY USE ONLY (Leave blank) 2. REPORT DATE September 2003 3. REPORT TYPE AND DATES COVERED Master’s Thesis 4. TITLE... University , 1996 Submitted in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE IN COMPUTER SCIENCE from

Future experimental needs to support applied aerodynamics - A transonic perspective

NASA Technical Reports Server (NTRS)

Gloss, Blair B.

1992-01-01

Advancements in facilities, test techniques, and instrumentation are needed to provide data required for the development of advanced aircraft and to verify computational methods. An industry survey of major users of wind tunnel facilities at Langley Research Center (LaRC) was recently carried out to determine future facility requirements, test techniques, and instrumentation requirements; results from this survey are reflected in this paper. In addition, areas related to transonic testing at LaRC which are either currently being developed or are recognized as needing improvements are discussed.

Methodological requirements to test a possible in-group advantage in judging emotions across cultures: comment on Elfenbein and Ambady (2002) and evidence.

PubMed

Matsumoto, David

2002-03-01

H. A. Elfenbein and N. Ambady's (2002) conclusions concerning a possible in-group advantage in judging emotions across cultures are unwarranted. The author discusses 2 methodological requirements for studies to test adequately the in-group advantage hypothesis and an additional requirement in reviewing multiple judgment studies and examining variance in judgment effects across those studies. The few studies that Elfenbein and Ambady reported that support the in-group advantage hypothesis need to be examined for whether they meet the criteria discussed; if they do not, their data cannot be used to support any contention of cultural differences in judgments, let alone the in-group advantage hypothesis. Furthermore, the role of signal clarity needs to be explored in possibly moderating effects across studies; however, this was not done.

New Direction of NASA Exploration Life Support

NASA Technical Reports Server (NTRS)

Chambliss, Joe; Lawson, B. Michael; Barta, Daniel J.

2006-01-01

NASA's activities in life support Research and Technology Development (R&TD) have changed in both focus and scope following implementation of recommendations from the Exploration System Architecture Study (ESAS). The limited resources available and the compressed schedule to conduct life support R&TD have required that future efforts address the needs of the Crew Exploration Vehicle (CEV), the Lunar Surface Access Module (LSAM) and Lunar Outpost (LO). Advanced Life Support (ALS) efforts related to long duration planetary bases have been deferred or canceled. This paper describes the scope of the new Exploration Life Support (ELS) project; how it differs from ALS, and how it supports critical needs for the CEV, LSAM and LO. In addition, this paper provides rationale for changes in the scope and focus of technical content within ongoing life support R&TD activities.

International Space Station Aeromedical Support in Star City, Russia

NASA Technical Reports Server (NTRS)

Cole, Richard; Chamberlin, Blake; Dowell, Gene; Castleberry, Tarah; Savage, Scott

2010-01-01

The Space Medicine Division at Johnson Space Center works with the International Space Station s international partners (IP) to accomplish assigned health care tasks. Each IP may assign a flight surgeon to support their assigned crewmembers during all phases of training, in-flight operations, and postflight activities. Because of the extensive amount of astronaut training conducted in Star City; NASA, in collaboration with its IPs, has elected to keep a flight surgeon assigned to NASA s Star City office to provide support to the U.S., Canadian, Japanese, and European astronauts during hazardous training activities and provide support for any contingency landings of Soyuz spacecraft in Kazakhstan. The physician also provides support as necessary to the Mission Control Center in Moscow for non-Russian crew-related activities. In addition, the physician in Star City provides ambulatory medical care to the non-Russian-assigned personnel in Star City and visiting dependents. Additional work involves all medical supplies, administration, and inventory. The Star City physician assists in medical evacuation and/or in obtaining support from western clinics in Moscow when required care exceeds local resources. Overall, the Russians are responsible for operations and the medical care of the entire crew when training in Star City and during launch/landing operations. However, they allow international partner flight surgeons to care for their crewmembers as agreed to in the ISS Medical Operations Requirements Document. Medical support focuses on pressurized, monitored, and other hazardous training activities. One of the most important jobs is to act as a medical advocate for the astronauts and to reduce the threat that these hazardous activities pose. Although the Russians have a robust medical system, evacuation may be needed to facilitate ongoing medical care. There are several international medical evacuation companies that provide this care.

Restraint of children with additional needs in motor vehicles: knowledge and challenges of paediatric occupational therapists in Victoria, Australia.

PubMed

Baker, Anne; Galvin, Jane; Vale, Lisa; Lindner, Helen

2012-02-01

This research project aimed to understand the challenges faced by occupational therapists when making recommendations regarding the restraint of children with additional needs in motor vehicles in Victoria, Australia. A cross-sectional survey design was used to explore current practice in relation to the prescription of motor vehicle restraints in Victoria, Australia. An electronic survey was sent to occupational therapists working with children aged from birth to 18 years in early intervention services, hospitals, schools, community services or private practice.   Challenges faced by occupational therapists related to a lack of knowledge of relevant standards and legal requirements, issues seating children with behavioural difficulties, families' inability to purchase recommended equipment and constraints as a result of funding issues. Further work is required to develop appropriate resources which support occupational therapists to make car seating recommendations for children with additional needs which comply with Australian legal requirements and standards. © 2011 The Authors. Australian Occupational Therapy Journal © 2011 Occupational Therapy Australia.

9 CFR 317.312 - Reference amounts customarily consumed per eating occasion.

Code of Federal Regulations, 2010 CFR

2010-01-01

... systems or organizations; (ii) Serving sizes recommended in comments; (iii) Serving sizes used by... requires further preparation, e.g., cooking or the addition of water or other ingredients, and if paragraph... Amount identified in paragraph (b) of this section. (1) Labeling applications and supporting...

9 CFR 317.312 - Reference amounts customarily consumed per eating occasion.

Code of Federal Regulations, 2011 CFR

2011-01-01

... systems or organizations; (ii) Serving sizes recommended in comments; (iii) Serving sizes used by... requires further preparation, e.g., cooking or the addition of water or other ingredients, and if paragraph... Amount identified in paragraph (b) of this section. (1) Labeling applications and supporting...

Choosing Assessments that Matter

ERIC Educational Resources Information Center

Abilock, Debbie, Ed.

2007-01-01

Professionally, school librarians are faced with an explosion of choices--search engines, online catalogs, media types, subscription databases, and Web tools--all requiring scrutiny, evaluation, and selection. In turn, this support "stuff" forms a basis for making additional choices about how and what they teach and what they assess. Whereas once…

Introduction: Shall We Gather in the Classroom?

ERIC Educational Resources Information Center

Housel, Teresa Heinz; Harvey, Vickie L.

2011-01-01

First-generation college students (FGS) often straddle different cultures between school and home. Because of this cultural disparity, FGS frequently encounter barriers to academic success and require additional support resources on campus. Simply offering more financial aid does not address the cultural and emotional challenges that these…

75 FR 60617 - Review and Approval of Projects

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-01

... cease taking water at given flow levels are in fact abiding by passby limitations. In addition, the... notice than the current contiguous property owner requirement that is based on proximity, not science... conservative management approach helping to ensure that applications are supported by science. Rather than...

75 FR 45093 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-02

...; student tracker database updates, 16 hours. Burden Hours: 11,328. Needs and Uses: Under the authority of... application, by academic professors/advisors. NOAA OEd student scholar alumni are also requested to provide... tracker database with the required student information. In addition, the collected student data supports...

Life Support and Habitation Systems: Crew Support and Protection for Human Exploration Missions Beyond Low Earth Orbit

NASA Technical Reports Server (NTRS)

Barta, Daniel J.; McQuillan, Jeffrey

2011-01-01

The National Aeronautics and Space Administration (NASA) has recently expanded its mission set for possible future human exploration missions. With multiple options there is interest in identifying technology needs across these missions to focus technology investments. In addition to the Moon and other destinations in cis-lunar space, other destinations including Near Earth Objects and Mars have been added for consideration. Recently, technology programs and projects have been re-organizing to better meet the Agency s strategic goals and address needs across these potential future missions. Life Support and Habitation Systems (LSHS) is one of 10 Foundational Domains as part of the National Aeronautics and Space Administration s Exploration Technology Development Program. The chief goal of LSHS is to develop and mature advanced technologies to sustain human life on missions beyond Low Earth Orbit (LEO) to increase reliability, reduce dependency on resupply and increase vehicle self-sufficiency. For long duration exploration missions, further closure of life support systems is of interest. Focus includes key technologies for atmosphere revitalization, water recovery, waste management, thermal control and crew accommodations. Other areas of focus include technologies for radiation protection, environmental monitoring and fire protection. The aim is to recover additional consumable mass, reduce requirements for power, volume, heat rejection, crew involvement, and meet exploration vehicle requirements. This paper provides a brief description of the LSHS Foundational Domain as defined for fiscal year 2011.

SCaN Transportable Communication Platform (STCP)

NASA Technical Reports Server (NTRS)

Haddad, George; Tanger, Thomas; Pleva, David; Schoenholz, Bryan; Nam, Connor

2017-01-01

NASA Glenn Research Center required a satellite communication trailer that served dual purposes; 24/7 Emergency Communication Services (ECS) in the event of a natural or manmade disaster that disrupted conventional communications, and a Ka Band NASA TDRS capability providing a research capability for over the air evaluations/characterizations. The trailer was to be field deployable, environmentally controlled and self-contained providing local area networks (LANs) and Wide Area Networks (WAN's) with user access both wired (Ethernet) and wireless (802.11) supporting VoIP, Internet Web access and Email. The TDRSS terminal included a 200W TWT amplifier mounted on the feed boom, individual up and down converters, and custom integrated waveguide and a supporting feed system. Other features such as a mast, generator, electrical, lighting, surveillance, and storage capabilities were also required. The Trailer was developed and demonstrated these original requested capabilities. New Requirements are defined and the trailer is now being evolved and upgraded to be a backup for the Near- Earth Network (NEN) Stations at KSC that will support the launch phase of EM-1. This paper presents the current and future capabilities of the trailer and additional options that will make it a valuable deployable asset to support remote operations from any launch from location.

eHealth technologies to support nutrition and physical activity behaviors in diabetes self-management.

PubMed

Rollo, Megan E; Aguiar, Elroy J; Williams, Rebecca L; Wynne, Katie; Kriss, Michelle; Callister, Robin; Collins, Clare E

2016-01-01

Diabetes is a chronic, complex condition requiring sound knowledge and self-management skills to optimize glycemic control and health outcomes. Dietary intake and physical activity are key diabetes self-management (DSM) behaviors that require tailored education and support. Electronic health (eHealth) technologies have a demonstrated potential for assisting individuals with DSM behaviors. This review provides examples of technologies used to support nutrition and physical activity behaviors in the context of DSM. Technologies covered include those widely used for DSM, such as web-based programs and mobile phone and smartphone applications. In addition, examples of novel tools such as virtual and augmented reality, video games, computer vision for dietary carbohydrate monitoring, and wearable devices are provided. The challenges to, and facilitators for, the use of eHealth technologies in DSM are discussed. Strategies to support the implementation of eHealth technologies within practice and suggestions for future research to enhance nutrition and physical activity behaviors as a part of broader DSM are provided.

eHealth technologies to support nutrition and physical activity behaviors in diabetes self-management

PubMed Central

Rollo, Megan E; Aguiar, Elroy J; Williams, Rebecca L; Wynne, Katie; Kriss, Michelle; Callister, Robin; Collins, Clare E

2016-01-01

Diabetes is a chronic, complex condition requiring sound knowledge and self-management skills to optimize glycemic control and health outcomes. Dietary intake and physical activity are key diabetes self-management (DSM) behaviors that require tailored education and support. Electronic health (eHealth) technologies have a demonstrated potential for assisting individuals with DSM behaviors. This review provides examples of technologies used to support nutrition and physical activity behaviors in the context of DSM. Technologies covered include those widely used for DSM, such as web-based programs and mobile phone and smartphone applications. In addition, examples of novel tools such as virtual and augmented reality, video games, computer vision for dietary carbohydrate monitoring, and wearable devices are provided. The challenges to, and facilitators for, the use of eHealth technologies in DSM are discussed. Strategies to support the implementation of eHealth technologies within practice and suggestions for future research to enhance nutrition and physical activity behaviors as a part of broader DSM are provided. PMID:27853384

Does Prevention Pay? Costs and Potential Cost-savings of School Interventions Targeting Children with Mental Health Problems.

PubMed

Wellander, Lisa; Wells, Michael B; Feldman, Inna

2016-06-01

In Sweden, the local government is responsible for funding schools in their district. One funding initiative is for schools to provide students with mental health problems with additional support via extra teachers, personal assistants, and special education classes. There are evidence-based preventive interventions delivered in schools, which have been shown to decrease the levels of students' mental health problems. However, little is known about how much the local government currently spends on students' mental health support and if evidence-based interventions could be financially beneficial. The aim of this study was to estimate the costs of providing additional support for students' mental health problems and the potential cost-offsets, defined as reduced school-based additional support, if two evidence-based school interventions targeting children's mental health problems were implemented in routine practice. This study uses data on the additional support students with mental health problems received in schools. Data was collected from one school district for students aged 6 to 16 years. We modeled two Swedish school interventions, Comet for Teachers and Social and Emotional Training (SET), which both had evidence of reducing mental health problems. We used a cost-offset analysis framework, assuming both interventions were fully implemented throughout the whole school district. Based on the published studies, the expected effects and the costs of the interventions were calculated. We defined the cost-offsets as the amount of predicted averted additional support for students with ongoing mental health problems who might no longer require receiving services such as one-on-one time with an extra teacher, a personal assistant, or to be placed in a special education classroom. A cost-offset analysis, from a payer's perspective (the local government responsible for school financing), was conducted comparing the costs of both interventions with the potential cost-savings due to a reduction in the prevalence of mental health problems and averted additional support required. The school district was comprised of 6,256 students, with 310 students receiving additional support for their mental health problems. Of these, 143 received support in their original school due to either having ADHD (n = 111), psychosocial problems (n = 26), or anxiety/depression (n = 6). The payers' total cost of additional support was 2,637,850 Euro per school year (18,447 Euro per student). The cost of running both interventions for the school district was 953,643 Euro for one year, while the potential savings for these interventions were estimated to be 627,150 Euro. The estimated effects showed that there would be a reduction of students needing additional support (25 for ADHD, eight for psychosocial problems, and one for anxiety/depression), and the payer would receive a return on their invested resources in less than two years (1.5 years) after implementation. Preventive school interventions can both improve some children's mental health problems and be financially beneficial for the payer. However, they are still limited in their scope of reducing all students' mental health statuses to below clinical cut-offs; therefore, the preventive school interventions should be used as a supplement, but not a replacement, to current practices. The findings have political and societal implications, in that payers can reallocate their funds toward preventive measures targeting students' mental health problems, while reducing the costs. When evaluating public health actions, it is necessary to consider their economic impact. The resources are scarce and the decision makers need knowledge on how to allocate their resources in an efficient way. Cost-offset analysis is seen as one way for decision makers to comprehend research findings; however, such analyses tend to not include the full benefits of the interventions, and actual impacts need to be fully evaluated in routine implementation.

Research into software executives for space operations support

NASA Technical Reports Server (NTRS)

Collier, Mark D.

1990-01-01

Research concepts pertaining to a software (workstation) executive which will support a distributed processing command and control system characterized by high-performance graphics workstations used as computing nodes are presented. Although a workstation-based distributed processing environment offers many advantages, it also introduces a number of new concerns. In order to solve these problems, allow the environment to function as an integrated system, and present a functional development environment to application programmers, it is necessary to develop an additional layer of software. This 'executive' software integrates the system, provides real-time capabilities, and provides the tools necessary to support the application requirements.

Ares V Utilization in Support of a Human Mission to Mars

NASA Technical Reports Server (NTRS)

Holladay, J. B.; Jaap, J. P.; Pinson, R. M.; Creech, S. D.; Ryan, R. M.; Monk, T. S.; Baggett. K. E.; Runager, M. D.; Dux, I. J.; Hack, K. J.;

Predicting United States Medical Licensure Examination Step 2 clinical knowledge scores from previous academic indicators.

PubMed

Monteiro, Kristina A; George, Paul; Dollase, Richard; Dumenco, Luba

2017-01-01

The use of multiple academic indicators to identify students at risk of experiencing difficulty completing licensure requirements provides an opportunity to increase support services prior to high-stakes licensure examinations, including the United States Medical Licensure Examination (USMLE) Step 2 clinical knowledge (CK). Step 2 CK is becoming increasingly important in decision-making by residency directors because of increasing undergraduate medical enrollment and limited available residency vacancies. We created and validated a regression equation to predict students' Step 2 CK scores from previous academic indicators to identify students at risk, with sufficient time to intervene with additional support services as necessary. Data from three cohorts of students (N=218) with preclinical mean course exam score, National Board of Medical Examination subject examinations, and USMLE Step 1 and Step 2 CK between 2011 and 2013 were used in analyses. The authors created models capable of predicting Step 2 CK scores from academic indicators to identify at-risk students. In model 1, preclinical mean course exam score and Step 1 score accounted for 56% of the variance in Step 2 CK score. The second series of models included mean preclinical course exam score, Step 1 score, and scores on three NBME subject exams, and accounted for 67%-69% of the variance in Step 2 CK score. The authors validated the findings on the most recent cohort of graduating students (N=89) and predicted Step 2 CK score within a mean of four points (SD=8). The authors suggest using the first model as a needs assessment to gauge the level of future support required after completion of preclinical course requirements, and rescreening after three of six clerkships to identify students who might benefit from additional support before taking USMLE Step 2 CK.

Prevention of Dating Violence on College Campuses: An Innovative Program

ERIC Educational Resources Information Center

Schwartz, Jonathan P.; Griffin, Linda D.; Russell, Melani M.; Frontaura-Duck, Sarannette

2006-01-01

Dating violence is a significant problem on college campuses that requires preventive interventions. In addition, sexist and stereotypical attitudes that support abusive dating behavior have been recognized as potential risk factors. Previous research has found that fraternity and sorority membership is related to stereotypical beliefs concerning…

AMPS Supporting Research and Technology (SR and T) report. Atmospheric, Magnetospheric and Plasmas in Space (AMPS) definition study

NASA Technical Reports Server (NTRS)

1976-01-01

A listing of candidate technology areas that require additional study is presented. These candidate tasks, identified during the AMPS Phase B studies, are requisites to the design, development, and operation of the AMPS concept selected for preliminary design.

9 CFR 381.412 - Reference amounts customarily consumed per eating occasion.

Code of Federal Regulations, 2011 CFR

2011-01-01

... systems or organizations; (ii) Serving sizes recommended in comments; (iii) Serving sizes used by...) If a product requires further preparation, e.g., cooking or the addition of water or other...) Labeling applications and supporting documentation to be filed under this section shall be submitted in...

9 CFR 381.412 - Reference amounts customarily consumed per eating occasion.

Code of Federal Regulations, 2010 CFR

2010-01-01

... systems or organizations; (ii) Serving sizes recommended in comments; (iii) Serving sizes used by...) If a product requires further preparation, e.g., cooking or the addition of water or other...) Labeling applications and supporting documentation to be filed under this section shall be submitted in...

76 FR 31510 - Proposed Amendment of Class E Airspace; Rutherfordton, NC

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-01

...; Airspace Docket No. 10-ASO-41) and be submitted in triplicate to the Docket Management System (see... airspace required to support new standard instrument approach procedures for Rutherford County Airport. The... action proposes to amend Class E Airspace at Rutherfordton, NC, to accommodate the additional airspace...

Technology: An Additional Tool for Learners.

ERIC Educational Resources Information Center

Smart, Linda; Fennessy, Ben

It is increasingly necessary to encourage lifelong learning in order to keep pace with the Information Age. As learners increasingly take charge of their own learning, however, they will require support to enable them to achieve their goals--and a variety of learning opportunities will need to be created. Learners' interests, imagination, and…

75 FR 62837 - Cooperative Agreement To Support Building Global Capacity for the Surveillance and Monitoring of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

... solutions through global collaboration and evidence-based approaches. C. Eligibility Information The.../Falsified Medicines and Supply Chain Threats AGENCY: Food and Drug Administration, HHS. ACTION: Notice... medicines and risks and breaches in the supply. FOR FURTHER INFORMATION AND ADDITIONAL REQUIREMENTS CONTACT...

NASA CEV Reference Entry GN&C System and Analysis

NASA Technical Reports Server (NTRS)

Munday, S.; Madsen, C.; Broome, J.; Gay, R.; Tigges, M.; Strahan, A.

2007-01-01

As part of its overall objectives, the Orion spacecraft will be required to perform entry and Earth landing functions for Low Earth Orbit (LEO) and Lunar missions. Both of these entry scenarios will begin with separation of the Service Module (SM), making them unique from other Orion mission phases in that only the Command Module (CM) portion of the Crew Exploration Vehicle (CEV) will be involved, requiring a CM specific Guidance, Navigation and Control (GN&C) system. Also common to these mission scenarios will be the need for GN&C to safely return crew (or cargo) to earth within the dynamic thermal and structural constraints of entry and within acceptable accelerations on the crew, utilizing the limited aerodynamic performance of the CM capsule. The lunar return mission could additionally require an initial atmospheric entry designed to support a precision skip and second entry, all to maximize downrange performance and ensure landing in the United States. This paper describes the Entry GN&C reference design, developed by the NASA-led team, that supports these entry scenarios and that was used to validate the Orion System requirements. Description of the reference design will include an overview of the GN&C functions, avionics, and effectors and will relate these to the specific design drivers of the entry scenarios, as well as the desire for commonality in vehicle systems to support the different missions. The discussion will also include the requirement for an Emergency Entry capability beyond that of the nominal performance of the multi-string GNC system, intended to return the crew to the earth in a survivable but unguided manner. Finally, various analyses will be discussed, including those completed to support validation efforts of the current CEV requirements, along with those on-going and planned with the intention to further refine the requirements and to support design development work in conjunction with the prime contractor. Some of these ongoing analyses will include work to size effectors (jets) and fuel budgets, to refine skip entry concepts, to characterize navigation performance and uncertainties, to provide for SM disposal offshore and to identify requirements to support target site selection.

Satellite Power Systems (SPS) concept definition study. Volume 6: SPS technology requirements and verification

NASA Technical Reports Server (NTRS)

Hanley, G.

1978-01-01

Volume 6 of the SPS Concept Definition Study is presented and also incorporates results of NASA/MSFC in-house effort. This volume includes a supporting research and technology summary. Other volumes of the final report that provide additional detail are as follows: (1) Executive Summary; (2) SPS System Requirements; (3) SPS Concept Evolution; (4) SPS Point Design Definition; (5) Transportation and Operations Analysis; and Volume 7, SPS Program Plan and Economic Analysis.

Satellite power systems (SPS) concept definition study. Volume 7: SPS program plan and economic analysis, appendixes

NASA Technical Reports Server (NTRS)

Hanley, G.

1978-01-01

Three appendixes in support of Volume 7 are contained in this document. The three appendixes are: (1) Satellite Power System Work Breakdown Structure Dictionary; (2) SPS cost Estimating Relationships; and (3) Financial and Operational Concept. Other volumes of the final report that provide additional detail are: Executive Summary; SPS Systems Requirements; SPS Concept Evolution; SPS Point Design Definition; Transportation and Operations Analysis; and SPS Technology Requirements and Verification.

Environmental Control and Life Support (ECLS) Integrated Roadmap Development

NASA Technical Reports Server (NTRS)

Metcalf, Jordan L.; Carrasquillo, Robyn; Bagdigian, Bob; Peterson, Laurie

2011-01-01

This white paper documents a roadmap for development of Environmental Control and Life Support (ECLS) Systems (ECLSS) capabilities required to enable beyond-Low Earth Orbit (LEO) Exploration missions. In many cases, the execution of this Exploration-based roadmap will directly benefit International Space Station (ISS) operational capability by resolving known issues and/or improving overall system reliability. In addition, many of the resulting products will be applicable across multiple Exploration elements such as Multi-Purpose Crew Vehicle (MPCV), Multi-Mission Space Exploration Vehicle (MMSEV), Deep Space Habitat (DSH), and Landers. Within the ECLS community, this white paper will be a unifying tool that will improve coordination of resources, common hardware, and technologies. It will help to align efforts to focus on the highest priority needs that will produce life support systems for future human exploration missions that will simply run in the background, requiring minimal crew interaction.

The Effectiveness of an Online Curriculum on High School Students' Understanding of Biological Evolution

NASA Astrophysics Data System (ADS)

Marsteller, Robert B.; Bodzin, Alec M.

2015-12-01

An online curriculum about biological evolution was designed to promote increased student content knowledge and evidentiary reasoning. A feasibility study was conducted with 77 rural high school biology students who learned with the online biological evolution unit. Data sources included the Biological Evolution Assessment Measure (BEAM), an analysis of discussion forum posts, and a post-implementation perceptions and attitudes questionnaire. BEAM posttest scores were significantly higher than the pretest scores. However, the findings revealed that the students required additional support to develop evidentiary reasoning. Many students perceived that the Web-based curriculum would have been enhanced by increased immediate interaction and feedback. Students required greater scaffolding to support complex, process-oriented tasks. Implications for designing Web-based science instruction with curriculum materials to support students' acquisition of content knowledge and science process skills in a Web-based setting are discussed.

Maintenance and Logistics Support for the International Monitoring System Network of the CTBTO

NASA Astrophysics Data System (ADS)

Haslinger, F.; Brely, N.; Akrawy, M.

2007-05-01

The global network of the International Monitoring System (IMS) of the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO), once completed, will consist of 321 monitoring facilities of four different technologies: hydroacoustic, seismic, infrasonic, and radionuclide. As of today, about 65% of the installations are completed and contribute data to the products issued by the International Data Centre (IDC) of the CTBTO. In order to accomplish the task to reliably collect evidence for any potential nuclear test explosion anywhere on the planet, all stations are required to perform to very high data availability requirements (at least 98% data availability over a 12-month period). To enable reaching this requirement, a three-layer concept has been developed to allow efficient support of the IMS stations: Operations, Maintenance and Logistics, and Engineering. Within this concept Maintenance and Logistics provide second level support of the stations, whereby problems arising at the station are assigned through the IMS ticket system to Maintenance if they cannot be resolved on the Operations level. Maintenance will then activate the required resources to appropriately address and ultimately resolve the problem. These resources may be equipment support contracts, other third party contracts, or the dispatch of a maintenance team. Engineering Support will be activated if the problem requires redesign of the station or after catastrophic failures when a total rebuild of a station may be necessary. In this model, Logistics Support is responsible for parts replenishment and support contract management. Logistics Support also collects and analyzes relevant failure mode and effect information, develops supportability models, and has the responsibility for document management, obsolescence, risk & quality, and configuration management, which are key elements for efficient station support. Maintenance Support in addition is responsible for maintenance strategies, for planning and oversight of the execution of preventive maintenance programs by the Station Operators, and for review of operational troubleshooting procedures used in first level support. Particular challenges for the efficient and successful Maintenance and Logistics Support of the IMS network lie in the specific political boundary conditions regulating its implementation, in the fact that all IMS facilities and their equipment are owned by the respective host countries, and in finding the appropriate balance between outsourcing services and retaining essential in-house expertise.

Evaluating the impact and costs of deploying an electronic medical record system to support TB treatment in Peru

PubMed Central

Fraser, Hamish SF; Blaya, Joaquin; Choi, Sharon S; Bonilla, Cesar; Jazayeri, Darius

2006-01-01

The PIH-EMR is a Web based electronic medical record that has been in operation for over four years in Peru supporting the treatment of drug resistant TB. We describe here the types of evaluations that have been performed on the EMR to assess its impact on patient care, reporting, logistics and observational research. Formal studies have been performed on components for drug order entry, drug requirements prediction tools and the use of PDAs to collect bacteriology data. In addition less formal data on the use of the EMR for reporting and research are reviewed. Experience and insights from porting the PIH-EMR to the Philippines, and modifying it to support HIV treatment in Haiti and Rwanda are discussed. We propose that additional data of this sort is valuable in assessing medical information systems especially in resource poor areas. PMID:17238344

Evaluating the impact and costs of deploying an electronic medical record system to support TB treatment in Peru.

PubMed

Fraser, Hamish S F; Blaya, Joaquin; Choi, Sharon S; Bonilla, Cesar; Jazayeri, Darius

2006-01-01

The PIH-EMR is a Web based electronic medical record that has been in operation for over four years in Peru supporting the treatment of drug resistant TB. We describe here the types of evaluations that have been performed on the EMR to assess its impact on patient care, reporting, logistics and observational research. Formal studies have been performed on components for drug order entry, drug requirements prediction tools and the use of PDAs to collect bacteriology data. In addition less formal data on the use of the EMR for reporting and research are reviewed. Experience and insights from porting the PIH-EMR to the Philippines, and modifying it to support HIV treatment in Haiti and Rwanda are discussed. We propose that additional data of this sort is valuable in assessing medical information systems especially in resource poor areas.

National Transonic Facility Characterization Status

NASA Technical Reports Server (NTRS)

Bobbitt, C., Jr.; Everhart, J.; Foster, J.; Hill, J.; McHatton, R.; Tomek, W.

2000-01-01

This paper describes the current status of the characterization of the National Transonic Facility. The background and strategy for the tunnel characterization, as well as the current status of the four main areas of the characterization (tunnel calibration, flow quality characterization, data quality assurance, and support of the implementation of wall interference corrections) are presented. The target accuracy requirements for tunnel characterization measurements are given, followed by a comparison of the measured tunnel flow quality to these requirements based on current available information. The paper concludes with a summary of which requirements are being met, what areas need improvement, and what additional information is required in follow-on characterization studies.

Foot pressure analysis of gait pattern in older Japanese females requiring different personal care support levels.

PubMed

Takayanagi, Naoto; Sudo, Motoki; Fujii, Masahiko; Sakai, Hirokazu; Morimoto, Keiko; Tomisaki, Masumi; Niki, Yoshifumi; Tokimitsu, Ichiro

2018-03-01

[Purpose] This study evaluated gait parameters and foot pressure in two regions of the feet among older females with different personal care support needs to analyze factors that contribute to higher support requirements. [Subjects and Methods] Thirty-two older females were divided into support-need and care-need level groups. Gait parameters (speed, cadence, step length, step width, gait angle, toe angle, double support phase, swing phase, and stance phase) and foot pressure during a 5-m walk were measured and analyzed in the two groups. [Results] The percentage of the double support phase on both feet and the right stance phase were significantly higher in the care-need level group, while that of the right swing phase was significantly lower than that of the support-need level group. Additionally, the phase showing peak pressure on the left rear foot was significantly delayed and the left forefoot pressure in the terminal stance was significantly lower in the care-need level group than in the support-need level group. [Conclusion] These findings show that the temporal duration parameters and foot pressure on a particular side were significantly different between the two groups and suggest that these differences were associated with a higher care level.

Towards the formal verification of the requirements and design of a processor interface unit: HOL listings

NASA Technical Reports Server (NTRS)

Fura, David A.; Windley, Phillip J.; Cohen, Gerald C.

1993-01-01

This technical report contains the Higher-Order Logic (HOL) listings of the partial verification of the requirements and design for a commercially developed processor interface unit (PIU). The PIU is an interface chip performing memory interface, bus interface, and additional support services for a commercial microprocessor within a fault tolerant computer system. This system, the Fault Tolerant Embedded Processor (FTEP), is targeted towards applications in avionics and space requiring extremely high levels of mission reliability, extended maintenance-free operation, or both. This report contains the actual HOL listings of the PIU verification as it currently exists. Section two of this report contains general-purpose HOL theories and definitions that support the PIU verification. These include arithmetic theories dealing with inequalities and associativity, and a collection of tactics used in the PIU proofs. Section three contains the HOL listings for the completed PIU design verification. Section 4 contains the HOL listings for the partial requirements verification of the P-Port.

Transportation node space station conceptual design

NASA Technical Reports Server (NTRS)

1988-01-01

A number of recent studies have addressed the problem of a transportation node space station. How things would change or what addition facilities would be needed to support a major lunar or Mars initiative is a much often asked question. The support of a lunar base, requiring stacks on the order of 200 metric tons each to land 25 m tons on the lunar surface with reusable vehicles is addressed. The problem of maintaining and reusing large single stage Orbit Transfer Vehicles (OTVs) and single stage lander/launchers in space are examined. The required people and equipment needed, to maintain these vehicles are only vaguely known at present. The people and equipment needed depend on how well the OTV and lander/launcher can be designed for easy reuse. Since the OTV and lander/launcher are only conceptually defined at present, the real maintenance and refurbishment requirements are unobtainable. An estimate of what is needed, based on previous studies and obvious requirements was therefore made. An attempt was made to err on the conservative side.

Virtual environment architecture for rapid application development

NASA Technical Reports Server (NTRS)

Grinstein, Georges G.; Southard, David A.; Lee, J. P.

1993-01-01

We describe the MITRE Virtual Environment Architecture (VEA), a product of nearly two years of investigations and prototypes of virtual environment technology. This paper discusses the requirements for rapid prototyping, and an architecture we are developing to support virtual environment construction. VEA supports rapid application development by providing a variety of pre-built modules that can be reconfigured for each application session. The modules supply interfaces for several types of interactive I/O devices, in addition to large-screen or head-mounted displays.

Chinese strategic culture, Shih and Li: a comparison of the Kuomintang and Chinese Communist Party from 1923-1927

DTIC Science & Technology

2016-05-26

force. In addition, the authors assert that, although not directly a part of Confucian tradition, the writings of Sun Tzu support achieving victory...ruler finds himself in a situation where the opponent is unwilling to submit, then force remains the only option. The writing of Sun Tzu also seems to...supports that Sun Tzu himself understood that not all conflicts allow resolution through manipulation of Shih, thus requiring force to achieve the

Sizing a PACS

NASA Astrophysics Data System (ADS)

Wilson, Dennis L.; Glicksman, Robert A.

1994-05-01

A Picture Archiving and Communications System (PACS) must be able to support the image rate of the medical treatment facility. In addition the PACS must have adequate working storage and archive storage capacity required. The calculation of the number of images per minute and the capacity of working storage and of archiving storage is discussed. The calculation takes into account the distribution of images over the different size of radiological images, the distribution between inpatient and outpatient, and the distribution over plain film CR images and other modality images. The support of the indirect clinical image load is difficult to estimate and is considered in some detail. The result of the exercise for a particular hospital is an estimate of the average size of the images and exams on the system, of the number of gigabytes of working storage, of the number of images moved per minute, of the size of the archive in gigabytes, and of the number of images that are to be moved by the archive per minute. The types of storage required to support the image rates and the capacity required are discussed.

Major design issues of molten carbonate fuel cell power generation unit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, T.P.

1996-04-01

In addition to the stack, a fuel cell power generation unit requires fuel desulfurization and reforming, fuel and oxidant preheating, process heat removal, waste heat recovery, steam generation, oxidant supply, power conditioning, water supply and treatment, purge gas supply, instrument air supply, and system control. These support facilities add considerable cost and system complexity. Bechtel, as a system integrator of M-C Power`s molten carbonate fuel cell development team, has spent substantial effort to simplify and minimize these supporting facilities to meet cost and reliability goals for commercialization. Similiar to other fuels cells, MCFC faces design challenge of how to complymore » with codes and standards, achieve high efficiency and part load performance, and meanwhile minimize utility requirements, weight, plot area, and cost. However, MCFC has several unique design issues due to its high operating temperature, use of molten electrolyte, and the requirement of CO2 recycle.« less

The effect of U.S. policies on the economics of libraries.

PubMed Central

Cummings, M M

1985-01-01

The decline in federal support of educational programs has made it difficult for libraries to apply new technologies to improve practices and services. While federal support has declined in constant dollars, there has been a modest increase in grants from private foundations. Current U.S. policies require federal agencies to recover full costs of rendering services (Circular A-25) and require the transfer of many federal service-oriented activities to the commercial sector (Circular A-76). Additionally, the Paperwork Reduction Act of 1980 is inhibiting the production and dissemination of federal publications. Government pursuit of these policies adds a heavy economic burden to libraries and threatens to reduce access to the scholarly and scientific record. PMID:3978292

Requirements for facilities and measurement techniques to support CFD development for hypersonic aircraft

NASA Technical Reports Server (NTRS)

Sellers, William L., III; Dwoyer, Douglas L.

1992-01-01

The design of a hypersonic aircraft poses unique challenges to the engineering community. Problems with duplicating flight conditions in ground based facilities have made performance predictions risky. Computational fluid dynamics (CFD) has been proposed as an additional means of providing design data. At the present time, CFD codes are being validated based on sparse experimental data and then used to predict performance at flight conditions with generally unknown levels of uncertainty. This paper will discuss the facility and measurement techniques that are required to support CFD development for the design of hypersonic aircraft. Illustrations are given of recent success in combining experimental and direct numerical simulation in CFD model development and validation for hypersonic perfect gas flows.

Dynamic Online Bandwidth Adjustment Scheme Based on Kalai-Smorodinsky Bargaining Solution

NASA Astrophysics Data System (ADS)

Kim, Sungwook

Virtual Private Network (VPN) is a cost effective method to provide integrated multimedia services. Usually heterogeneous multimedia data can be categorized into different types according to the required Quality of Service (QoS). Therefore, VPN should support the prioritization among different services. In order to support multiple types of services with different QoS requirements, efficient bandwidth management algorithms are important issues. In this paper, I employ the Kalai-Smorodinsky Bargaining Solution (KSBS) for the development of an adaptive bandwidth adjustment algorithm. In addition, to effectively manage the bandwidth in VPNs, the proposed control paradigm is realized in a dynamic online approach, which is practical for real network operations. The simulations show that the proposed scheme can significantly improve the system performances.

Perioperative Venoarterial Extracorporeal Membrane Oxygenation Support During Heart Transplant.

PubMed

Gedik, Ender; Atar, Funda; Ozdemirkan, Aycan; Camkiran Firat, Aynur; Zeyneloglu, Pinar; Sezgin, Atilla; Pirat, Arash

2017-02-01

Heart transplant is the only definitive treatment of end-stage heart failure. Venoarterial extracorporeal membrane oxygenation may be used as a bridge to heart transplant. This technique may be used after heart transplant for conditions refractory to medical treatment like primary graft failure. Previously, we reported our experience with patients who received extracorporeal support as a bridge to emergency heart transplant. In this study, we present our perioperative experience with heart transplants in which extracorporeal support was used. We retrospectively screened the data of 31 patients who were seen at our center between January 2014 and June 2016. We screened for patients who were admitted tothe intensive care unit before transplant and who required venoarterial extracorporeal membrane oxygenation for circulatory support and postoperative patients who required extracorporeal support. Patient demographics and characteristics, clinical data, and extracorporeal support data were collected from our electronic database and patient medical records. There were 14 patients who required perioperative extracorporeal support. Preoperative support was performed in 3 patients before transplant, and postoperative support was performed in 11 patients after transplant. The mean age was 37.7 years in patients within the preoperative group and 29.7 years in patients within the postoperative group. One patient with preoperative support and 5 with postoperative support were pediatric patients. The main indication for transplant was dilated cardiomyopathy in both groups (100% and 63.7%). Overall mortality rates were 33% in the preoperative group and 63.7% in the postoperative group. For patients on heart transplant wait lists who are worsening despite optimal medical therapy, venoarterial extracorporeal membrane oxygenation support is a safe and viable last resort. In addition, extracorporeal support can be used during the posttransplant period as salvage therapy in heart recipients with hemodynamic deterioration. In our experience, preoperative extracorporeal support had lower mortality rates compared with postoperative support.

Rodent Research on the International Space Station - A Look Forward

NASA Technical Reports Server (NTRS)

Kapusta, A. B.; Smithwick, M.; Wigley, C. L.

2014-01-01

Rodent Research on the International Space Station (ISS) is one of the highest priority science activities being supported by NASA and is planned for up to two flights per year. The first Rodent Research flight, Rodent Research-1 (RR-1) validates the hardware and basic science operations (dissections and tissue preservation). Subsequent flights will add new capabilities to support rodent research on the ISS. RR-1 will validate the following capabilities: animal husbandry for up to 30 days, video downlink to support animal health checks and scientific analysis, on-orbit dissections, sample preservation in RNA. Later and formalin, sample transfer from formalin to ethanol (hindlimbs), rapid cool-down and subsequent freezing at -80 of tissues and carcasses, sample return and recovery. RR-2, scheduled for SpX-6 (Winter 20142015) will add the following capabilities: animal husbandry for up to 60 days, RFID chip reader for individual animal identification, water refill and food replenishment, anesthesia and recovery, bone densitometry, blood collection (via cardiac puncture), blood separation via centrifugation, soft tissue fixation in formalin with transfer to ethanol, and delivery of injectable drugs that require frozen storage prior to use. Additional capabilities are also planned for future flights and these include but are not limited to male mice, live animal return, and the development of experiment unique equipment to support science requirements for principal investigators that are selected for flight. In addition to the hardware capabilities to support rodent research the Crew Office has implemented a training program in generic rodent skills for all USOS crew members during their pre-assignment training rotation. This class includes training in general animal handling, euthanasia, injections, and dissections. The dissection portion of this training focuses on the dissection of the spleen, liver, kidney with adrenals, brain, eyes, and hindlimbs. By achieving and maintaining proficiency in these basic skills as part of the nominal astronaut training curriculum this allows the rodent research program to focus the mission specific crew training on scientific requirements of research and operations flow.

Accounting for Incomplete Species Detection in Fish Community Monitoring

DOE Office of Scientific and Technical Information (OSTI.GOV)

McManamay, Ryan A; Orth, Dr. Donald J; Jager, Yetta

2013-01-01

Riverine fish assemblages are heterogeneous and very difficult to characterize with a one-size-fits-all approach to sampling. Furthermore, detecting changes in fish assemblages over time requires accounting for variation in sampling designs. We present a modeling approach that permits heterogeneous sampling by accounting for site and sampling covariates (including method) in a model-based framework for estimation (versus a sampling-based framework). We snorkeled during three surveys and electrofished during a single survey in suite of delineated habitats stratified by reach types. We developed single-species occupancy models to determine covariates influencing patch occupancy and species detection probabilities whereas community occupancy models estimated speciesmore » richness in light of incomplete detections. For most species, information-theoretic criteria showed higher support for models that included patch size and reach as covariates of occupancy. In addition, models including patch size and sampling method as covariates of detection probabilities also had higher support. Detection probability estimates for snorkeling surveys were higher for larger non-benthic species whereas electrofishing was more effective at detecting smaller benthic species. The number of sites and sampling occasions required to accurately estimate occupancy varied among fish species. For rare benthic species, our results suggested that higher number of occasions, and especially the addition of electrofishing, may be required to improve detection probabilities and obtain accurate occupancy estimates. Community models suggested that richness was 41% higher than the number of species actually observed and the addition of an electrofishing survey increased estimated richness by 13%. These results can be useful to future fish assemblage monitoring efforts by informing sampling designs, such as site selection (e.g. stratifying based on patch size) and determining effort required (e.g. number of sites versus occasions).« less

Dynamic composition of medical support services in the ICU: Platform and algorithm design details.

PubMed

Hristoskova, Anna; Moeyersoon, Dieter; Van Hoecke, Sofie; Verstichel, Stijn; Decruyenaere, Johan; De Turck, Filip

2010-12-01

The Intensive Care Unit (ICU) is an extremely data-intensive environment where each patient needs to be monitored 24/7. Bedside monitors continuously register vital patient values (such as serum creatinine, systolic blood pressure) which are recorded frequently in the hospital database (e.g. every 2 min in the ICU of the Ghent University Hospital), laboratories generate hundreds of results of blood and urine samples, and nurses measure blood pressure and temperature up to 4 times an hour. The processing of such large amount of data requires an automated system to support the physicians' daily work. The Intensive Care Service Platform (ICSP) offers the needed support through the development of medical support services for processing and monitoring patients' data. With an increased deployment of these medical support services, reusing existing services as building blocks to create new services offers flexibility to the developer and accelerates the design process. This paper presents a new addition to the ICSP, the Dynamic Composer for Web services. Based on a semantic description of the medical support services, this Composer enables a service to be executed by creating a composition of medical services that provide the needed calculations. The composition is achieved using various algorithms satisfying certain quality of service (QoS) constraints and requirements. In addition to the automatic composition the paper also proposes a recovery mechanism in case of unavailable services. When executing the composition of medical services, unavailable services are dynamically replaced by equivalent services or a new composition achieving the same result. The presented platform and QoS algorithms are put through extensive performance and scalability tests for typical ICU scenarios, in which basic medical services are composed to a complex patient monitoring service. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

MEA-Tools: an open source toolbox for the analysis of multi-electrode data with MATLAB.

PubMed

Egert, U; Knott, Th; Schwarz, C; Nawrot, M; Brandt, A; Rotter, S; Diesmann, M

2002-05-30

Recent advances in electrophysiological techniques have created new tools for the acquisition and storage of neuronal activity recorded simultaneously with numerous electrodes. These techniques support the analysis of the function as well as the structure of individual electrogenic cells in the context of surrounding neuronal or cardiac network. Commercially available tools for the analysis of such data, however, cannot be easily adapted to newly emerging requirements for data analysis and visualization, and cross compatibility between them is limited. In this report we introduce a free open source toolbox called microelectrode array tools (MEA-Tools) for the analysis of multi-electrode data based on the common data analysis environment MATLAB (version 5.3-6.1, The Mathworks, Natick, MA). The toolbox itself is platform independent. The file interface currently supports files recorded with MCRack (Multi Channel Systems, Reutlingen, Germany) under Microsoft Windows 95, 98, NT, and 2000, but can be adapted to other data acquisition systems. Functions are controlled via command line input and graphical user interfaces, and support common requirements for the analysis of local field potentials, extracellular spike activity, and continuous recordings, in addition to supplementary data acquired by additional instruments, e.g. intracellular amplifiers. Data may be processed as continuous recordings or time windows triggered to some event.

78 FR 21281 - Approval and Promulgation of Implementation Plans; State of Missouri; Infrastructure SIP...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-10

...EPA is proposing action on four Missouri State Implementation Plan (SIP) submissions. First, EPA is proposing to approve portions of two SIP submissions from the State of Missouri addressing the applicable requirements of Clean Air Act (CAA) for the 1997 and 2006 National Ambient Air Quality Standards (NAAQS) for fine particulate matter (PM2.5). The CAA requires that each state adopt and submit a SIP to support implementation, maintenance, and enforcement of each new or revised NAAQS promulgated by EPA. These SIPs are commonly referred to as ``infrastructure'' SIPs. The infrastructure requirements are designed to ensure that the structural components of each state's air quality management program are adequate to meet the state's responsibilities under the CAA. EPA is also proposing to approve two additional SIP submissions from Missouri, one addressing the Prevention of Significant Deterioration (PSD) program in Missouri, and another addressing the requirements applicable to any board or body which approves permits or enforcement orders of the CAA, both of which support requirements associated with infrastructure SIPs.

Guidelines and Suggestions for Balloon Gondola Design

NASA Technical Reports Server (NTRS)

Franco, Hugo

2017-01-01

This paper discusses the current gondola design requirements for the Columbia Scientific Balloon Facility (CSBF). The CSBF is responsible for launching and supporting balloon borne scientific instruments and has some current updated guidelines that will be discussed in this presentation. As the sophistication of Payload systems have increased in size and complexity new guidelines have been implemented in order to make these instruments stay within the acceptable launch risks. Additionally, there is a requirement to submit a proper stress analysis report that states the flight design requirements have been met. Suggestions are discussed in this presentation that establish the proper guidelines to submit these.

Functional Requirements for an Electronic Work Package System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oxstrand, Johanna H.

This document provides a set of high level functional requirements for a generic electronic work package (eWP) system. The requirements have been identified by the U.S. nuclear industry as a part of the Nuclear Electronic Work Packages - Enterprise Requirements (NEWPER) initiative. The functional requirements are mainly applied to eWP system supporting Basic and Moderate types of smart documents, i.e., documents that have fields for recording input such as text, dates, numbers, and equipment status, and documents which incorporate additional functionalities such as form field data “type“ validation (e.g. date, text, number, and signature) of data entered and/or self-populate basicmore » document information (usually from existing host application meta data) on the form when the user first opens it. All the requirements are categorized by the roles; Planner, Supervisor, Craft, Work Package Approval Reviewer, Operations, Scheduling/Work Control, and Supporting Functions. The categories Statistics, Records, Information Technology are also included used to group the requirements. All requirements are presented in Section 2 through Section 11. Examples of more detailed requirements are provided for the majority of high level requirements. These examples are meant as an inspiration to be used as each utility goes through the process of identifying their specific requirements. The report’s table of contents provides a summary of the high level requirements.« less

Report on Quality Control Review of the Raich Ende Malter & Co. LLP FY 2009 Single Audit of the Riverside Research Institute

DTIC Science & Technology

2012-03-07

compliance was based on a determination that 10 of the 14 compliance requirements were applicable to the Institute. However, the audit working papers...for all 14 of the compliance requirements were not adequate to support conclusions on applicability, internal control, and the audit opinion on...compliance with laws, regulations, and award provisions applicable to the R&D cluster program. In addition, the audit firm did not appropriately report an

Challenges in pediatric ambulatory anesthesia: kids are different.

PubMed

Collins, Corey E; Everett, Lucinda L

2010-06-01

The care of the child having ambulatory surgery presents a specific set of challenges to the anesthesia provider. This review focuses on areas of clinical distinction that support the additional attention children often require, and on clinical controversies that require providers to have up-to-date information to guide practice and address parental concerns. These include perioperative risk; obstructive sleep apnea; obesity; postoperative nausea and vomiting; neurocognitive outcomes; and specific concerns regarding common ear, nose, and throat procedures. Copyright (c) 2010 Elsevier Inc. All rights reserved.

Integrated science building

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conklin, Shane

2013-09-30

Shell space fit out included faculty office advising space, student study space, staff restroom and lobby cafe. Electrical, HVAC and fire alarm installations and upgrades to existing systems were required to support the newly configured spaces. These installations and upgrades included audio/visual equipment, additional electrical outlets and connections to emergency generators. The project provided increased chilled water capacity with the addition of an electric centrifugal chiller. Upgrades associated with chiller included upgrade of exhaust ventilation fan, electrical conductor and breaker upgrades, piping and upgrades to air handling equipment.

Needs Assessment for the Use of NASA Remote Sensing Data in the Development and Implementation of Estuarine and Coastal Water Quality Standards

NASA Technical Reports Server (NTRS)

Spiering, Bruce; Underwood, Lauren; Ellis, Chris; Lehrter, John; Hagy, Jim; Schaeffer, Blake

2010-01-01

The goals of the project are to provide information from satellite remote sensing to support numeric nutrient criteria development and to determine data processing methods and data quality requirements to support nutrient criteria development and implementation. The approach is to identify water quality indicators that are used by decision makers to assess water quality and that are related to optical properties of the water; to develop remotely sensed data products based on algorithms relating remote sensing imagery to field-based observations of indicator values; to develop methods to assess estuarine water quality, including trends, spatial and temporal variability, and seasonality; and to develop tools to assist in the development and implementation of estuarine and coastal nutrient criteria. Additional slides present process, criteria development, typical data sources and analyses for criteria process, the power of remote sensing data for the process, examples from Pensacola Bay, spatial and temporal variability, pixel matchups, remote sensing validation, remote sensing in coastal waters, requirements for remotely sensed data products, and needs assessment. An additional presentation examines group engagement and information collection. Topics include needs assessment purpose and objectives, understanding water quality decision making, determining information requirements, and next steps.

Design and Parametric Sizing of Deep Space Habitats Supporting NASA'S Human Space Flight Architecture Team

NASA Technical Reports Server (NTRS)

Toups, Larry; Simon, Matthew; Smitherman, David; Spexarth, Gary

2012-01-01

NASA's Human Space Flight Architecture Team (HAT) is a multi-disciplinary, cross-agency study team that conducts strategic analysis of integrated development approaches for human and robotic space exploration architectures. During each analysis cycle, HAT iterates and refines the definition of design reference missions (DRMs), which inform the definition of a set of integrated capabilities required to explore multiple destinations. An important capability identified in this capability-driven approach is habitation, which is necessary for crewmembers to live and work effectively during long duration transits to and operations at exploration destinations beyond Low Earth Orbit (LEO). This capability is captured by an element referred to as the Deep Space Habitat (DSH), which provides all equipment and resources for the functions required to support crew safety, health, and work including: life support, food preparation, waste management, sleep quarters, and housekeeping.The purpose of this paper is to describe the design of the DSH capable of supporting crew during exploration missions. First, the paper describes the functionality required in a DSH to support the HAT defined exploration missions, the parameters affecting its design, and the assumptions used in the sizing of the habitat. Then, the process used for arriving at parametric sizing estimates to support additional HAT analyses is detailed. Finally, results from the HAT Cycle C DSH sizing are presented followed by a brief description of the remaining design trades and technological advancements necessary to enable the exploration habitation capability.

Environmental control medical support team

NASA Technical Reports Server (NTRS)

Crump, William J.; Kilgore, Melvin V., Jr.

1988-01-01

The activities conducted in support of the Environmental Control and Life Support Team during December 7, 1987 through September 30, 1988 are summarized. The majority of the ongoing support has focused on the ECLSS area. Through a series of initial meetings with the ECLSS team and technical literature review, an initial list of critical topics was developed. Subtasks were then identified or additional related tasks received as action items from the ECLSS group meetings. Although most of the efforts focused on providing MSFC personnel with information regarding specific questions and problems related to ECLSS issues, other efforts regarding identifying an ECLSS Medical Support Team and constructing data bases of technical information were also initiated and completed. The specific tasks are as follows: (1) Provide support to the mechanical design and integration of test systems as related to microbiological concerns; (2) Assist with design of Human Subjects Test Protocols; (3) Interpretation and recommendations pertaining to air/water quality requirements; (4) Assist in determining the design specifications required as related to the Technical Demonstration Program; (5) Develop a data base of all microorganisms recovered from previous subsystem testing; (6) Estimates of health risk of individual microbes to test subjects; (7) Assist with setting limits for safety of test subjects; (8) Health monitoring of test subjects; (9) Assist in the preparation of test plans; (10) Assist in the development of a QA/QC program to assure the validity, accuracy and precision of the analyses; and (11) Assist in developing test plans required for future man in the loop testing.

The conceptual foundation of environmental decision support.

PubMed

Reichert, Peter; Langhans, Simone D; Lienert, Judit; Schuwirth, Nele

2015-05-01

Environmental decision support intends to use the best available scientific knowledge to help decision makers find and evaluate management alternatives. The goal of this process is to achieve the best fulfillment of societal objectives. This requires a careful analysis of (i) how scientific knowledge can be represented and quantified, (ii) how societal preferences can be described and elicited, and (iii) how these concepts can best be used to support communication with authorities, politicians, and the public in environmental management. The goal of this paper is to discuss key requirements for a conceptual framework to address these issues and to suggest how these can best be met. We argue that a combination of probability theory and scenario planning with multi-attribute utility theory fulfills these requirements, and discuss adaptations and extensions of these theories to improve their application for supporting environmental decision making. With respect to (i) we suggest the use of intersubjective probabilities, if required extended to imprecise probabilities, to describe the current state of scientific knowledge. To address (ii), we emphasize the importance of value functions, in addition to utilities, to support decisions under risk. We discuss the need for testing "non-standard" value aggregation techniques, the usefulness of flexibility of value functions regarding attribute data availability, the elicitation of value functions for sub-objectives from experts, and the consideration of uncertainty in value and utility elicitation. With respect to (iii), we outline a well-structured procedure for transparent environmental decision support that is based on a clear separation of scientific prediction and societal valuation. We illustrate aspects of the suggested methodology by its application to river management in general and with a small, didactical case study on spatial river rehabilitation prioritization. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Reading for Learning: Literacy Supports for 21st-Century Work

ERIC Educational Resources Information Center

Gomez, Louis M.; Gomez, Kimberley

2007-01-01

The U.S. work force is changing. Professional and related occupations and service occupations will be the fastest-growing sectors for the foreseeable future. Both demand strong communication skills for sharing complex ideas across diverse communities. In addition, the 21st-century economy will require its members to think creatively and critically…

How Close Is Close Reading?

ERIC Educational Resources Information Center

Saccomano, Doreen

2014-01-01

Close Reading is a strategy that can be used when reading challenging text. This strategy requires teachers to provide scaffolding, and create opportunities for think-alouds and rereading of text in order to help students become active readers who focus on finding text-based support for their answers. In addition, teachers must also be aware of…

Supporting Young Children in Combat-Injured Families: Call to Action

ERIC Educational Resources Information Center

Arata-Maiers, Teresa L.; Stafford, Elisabeth M.

2010-01-01

Military families are currently facing the longest period of combat in the history of the nation, along with the attendant challenges of prolonged or repeated deployment. With the return of 36,000-plus service members wounded in action, including nearly 11,000 requiring medical evacuation and those with additional "invisible injuries," there are…

Annotated Bibliography of Strategies for Infusing Transition Skills into Academic Instruction

ERIC Educational Resources Information Center

Holzberg, Debra G.; Rusher, Dana E.

2017-01-01

Since 1990, transition planning has been a requirement under the Individuals with Disabilities Education Act (IDEA). Students receiving services under IDEA must have an individualized education program (IEP) with goals aligned to grade-level content standards. In addition, the IEP must ensure the student has the supports necessary, including…

Identity Crisis: Multiple Measures and the Identification of Schools under ESSA. Summary

ERIC Educational Resources Information Center

Policy Analysis for California Education, PACE, 2016

2016-01-01

The Every Student Succeeds Act (ESSA) requires states to develop an accountability system that includes multiple measures of student academic performance and at least one additional indicator of "School Quality or Student Success" (SQSS). To support policymaking at both the state and federal level, the authors of "Identity Crisis:…

7 CFR 279.6 - Legal advice and extensions of time.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false Legal advice and extensions of time. 279.6 Section 279.6 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE... discretion, additional time is required for the firm to fully present information in support of its position...

Access Services Are Human Services: Collaborating to Provide Textbook Access to Students

ERIC Educational Resources Information Center

McElroy, Kelly; Moore, Dan; Hilterbrand, Lori; Hindes, Nicole

2017-01-01

Despite the clear negative impact of high textbook costs on students, limits--including space, funding, and policies--prevent many academic libraries from fully supporting textbook collections. Partnering with other campus units on textbook lending requires creative thinking but can provide students access to other services in addition to the…

Let History Reign

ERIC Educational Resources Information Center

Manzo, Kathleen Kennedy

2008-01-01

Spanish River High School is one of 40 U.S. History Schools and 21 affiliates around the country that get resources and academic support from the Gilder Lehrman Institute of American History. The schools require participating students to take a U.S. history course each year, in addition to any requisites in world history and other subjects. The…

34 CFR 650.33 - What is the duration of a fellowship?

Code of Federal Regulations, 2011 CFR

2011-07-01

... for a doctoral degree program of study for a total of 48 months or the time required for receiving the... application and that the fellow has attained satisfactory progress in the fellow's academic studies; and (iii) A recommendation from the institution that the additional period of fellowship support for...

34 CFR 650.33 - What is the duration of a fellowship?

Code of Federal Regulations, 2010 CFR

2010-07-01

... for a doctoral degree program of study for a total of 48 months or the time required for receiving the... application and that the fellow has attained satisfactory progress in the fellow's academic studies; and (iii) A recommendation from the institution that the additional period of fellowship support for...

76 FR 48751 - Lanxess Corp.; Filing of Food Additive Petition (Animal Use); Calcium Formate

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-09

.... Pocurull, Center for Veterinary Medicine, Food and Drug Administration, 7519 Standish Pl., Rockville, MD.... If, based on its review, the Agency finds that an environmental impact statement is not required, and... significant impact and the evidence supporting that finding will be published with the regulation in the...

Career Education Facilities: A Planning Guide for Space and Station Requirements. A Report

ERIC Educational Resources Information Center

Woodruff, Alan P.

This publication provides the educational planner and the architect with some suggestions concerning models by which they may plan new flexible-use, shared-space facilities and supports the models with guidelines for the development of facilities and educational programs for occupational education. In addition to discussing the financial…

40 CFR 725.975 - EPA approval of alternative control measures.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) TOXIC SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Additional... EPA via EPA's Central Data Exchange (CDX) using EPA-provided e-PMN software in the manner set forth in § 725.25(c). See 40 CFR 720.40(a)(2)(iv) for information on how to obtain e-PMN software. Support...

40 CFR 725.975 - EPA approval of alternative control measures.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) TOXIC SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Additional... EPA via EPA's Central Data Exchange (CDX) using EPA-provided e-PMN software in the manner set forth in § 725.25(c). See 40 CFR 720.40(a)(2)(iv) for information on how to obtain e-PMN software. Support...

40 CFR 725.975 - EPA approval of alternative control measures.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) TOXIC SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Additional... EPA via EPA's Central Data Exchange (CDX) using EPA-provided e-PMN software in the manner set forth in § 725.25(c). See 40 CFR 720.40(a)(2)(iv) for information on how to obtain e-PMN software. Support...

40 CFR 725.975 - EPA approval of alternative control measures.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) TOXIC SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Additional... equivalency to EPA under this part must submit the request to EPA (via CDX) using e-PMN software. See 40 CFR 720.40(a)(2)(ii) for information on how to obtain e-PMN software. Support documents related to these...

Arginine-glycine-aspartic acid functional branched semi-interpenetrating hydrogels.

PubMed

Plenderleith, Richard A; Pateman, Christopher J; Rodenburg, Cornelia; Haycock, John W; Claeyssens, Frederik; Sammon, Chris; Rimmer, Stephen

2015-10-14

For the first time a series of functional hydrogels based on semi-interpenetrating networks with both branched and crosslinked polymer components have been prepared and we show the successful use of these materials as substrates for cell culture. The materials consist of highly branched poly(N-isopropyl acrylamide)s with peptide functionalised end groups in a continuous phase of crosslinked poly(vinyl pyrrolidone). Functionalisation of the end groups of the branched polymer component with the GRGDS peptide produces a hydrogel that supports cell adhesion and proliferation. The materials provide a new synthetic functional biomaterial that has many of the features of extracellular matrix, and as such can be used to support tissue regeneration and cell culture. This class of high water content hydrogel material has important advantages over other functional hydrogels in its synthesis and does not require post-processing modifications nor are functional-monomers, which change the polymerisation process, required. Thus, the systems are amenable to large scale and bespoke manufacturing using conventional moulding or additive manufacturing techniques. Processing using additive manufacturing is exemplified by producing tubes using microstereolithography.

Traverse Planning Experiments for Future Planetary Surface Exploration

NASA Technical Reports Server (NTRS)

Hoffman, Stephen J.; Voels, Stephen A.; Mueller, Robert P.; Lee, Pascal C.

2012-01-01

The purpose of the investigation is to evaluate methodology and data requirements for remotely-assisted robotic traverse of extraterrestrial planetary surface to support human exploration program, assess opportunities for in-transit science operations, and validate landing site survey and selection techniques during planetary surface exploration mission analog demonstration at Haughton Crater on Devon Island, Nunavut, Canada. Additionally, 1) identify quality of remote observation data sets (i.e., surface imagery from orbit) required for effective pre-traverse route planning and determine if surface level data (i.e., onboard robotic imagery or other sensor data) is required for a successful traverse, and if additional surface level data can improve traverse efficiency or probability of success (TRPF Experiment). 2) Evaluate feasibility and techniques for conducting opportunistic science investigations during this type of traverse. (OSP Experiment). 3) Assess utility of remotely-assisted robotic vehicle for landing site validation survey. (LSV Experiment).

CardioClassifier: disease- and gene-specific computational decision support for clinical genome interpretation.

PubMed

Whiffin, Nicola; Walsh, Roddy; Govind, Risha; Edwards, Matthew; Ahmad, Mian; Zhang, Xiaolei; Tayal, Upasana; Buchan, Rachel; Midwinter, William; Wilk, Alicja E; Najgebauer, Hanna; Francis, Catherine; Wilkinson, Sam; Monk, Thomas; Brett, Laura; O'Regan, Declan P; Prasad, Sanjay K; Morris-Rosendahl, Deborah J; Barton, Paul J R; Edwards, Elizabeth; Ware, James S; Cook, Stuart A

2018-01-25

PurposeInternationally adopted variant interpretation guidelines from the American College of Medical Genetics and Genomics (ACMG) are generic and require disease-specific refinement. Here we developed CardioClassifier (http://www.cardioclassifier.org), a semiautomated decision-support tool for inherited cardiac conditions (ICCs).MethodsCardioClassifier integrates data retrieved from multiple sources with user-input case-specific information, through an interactive interface, to support variant interpretation. Combining disease- and gene-specific knowledge with variant observations in large cohorts of cases and controls, we refined 14 computational ACMG criteria and created three ICC-specific rules.ResultsWe benchmarked CardioClassifier on 57 expertly curated variants and show full retrieval of all computational data, concordantly activating 87.3% of rules. A generic annotation tool identified fewer than half as many clinically actionable variants (64/219 vs. 156/219, Fisher's P = 1.1  ×  10 -18 ), with important false positives, illustrating the critical importance of disease and gene-specific annotations. CardioClassifier identified putatively disease-causing variants in 33.7% of 327 cardiomyopathy cases, comparable with leading ICC laboratories. Through addition of manually curated data, variants found in over 40% of cardiomyopathy cases are fully annotated, without requiring additional user-input data.ConclusionCardioClassifier is an ICC-specific decision-support tool that integrates expertly curated computational annotations with case-specific data to generate fast, reproducible, and interactive variant pathogenicity reports, according to best practice guidelines.GENETICS in MEDICINE advance online publication, 25 January 2018; doi:10.1038/gim.2017.258.

Test Capability Enhancements to the NASA Langley 8-Foot High Temperature Tunnel

NASA Technical Reports Server (NTRS)

Harvin, S. F.; Cabell, K. F.; Gallimore, S. D.; Mekkes, G. L.

2006-01-01

The NASA Langley 8-Foot High Temperature Tunnel produces true enthalpy environments simulating flight from Mach 4 to Mach 7, primarily for airbreathing propulsion and aerothermal/thermo-structural testing. Flow conditions are achieved through a methane-air heater and nozzles producing aerodynamic Mach numbers of 4, 5 or 7 and have exit diameters of 8 feet or 4.5 feet. The 12-ft long free-jet test section, housed inside a 26-ft vacuum sphere, accommodates large test articles. Recently, the facility underwent significant upgrades to support hydrocarbon fueled scramjet engine testing and to expand flight simulation capability. The upgrades were required to meet engine system development and flight clearance verification requirements originally defined by the joint NASA-Air Force X-43C Hypersonic Flight Demonstrator Project and now the Air Force X-51A Program. Enhancements to the 8-Ft. HTT were made in four areas: 1) hydrocarbon fuel delivery; 2) flight simulation capability; 3) controls and communication; and 4) data acquisition/processing. The upgrades include the addition of systems to supply ethylene and liquid JP-7 to test articles; a Mach 5 nozzle with dynamic pressure simulation capability up to 3200 psf, the addition of a real-time model angle-of-attack system; a new programmable logic controller sub-system to improve process controls and communication with model controls; the addition of MIL-STD-1553B and high speed data acquisition systems and a classified data processing environment. These additions represent a significant increase to the already unique test capability and flexibility of the facility, and complement the existing array of test support hardware such as a model injection system, radiant heaters, six-component force measurement system, and optical flow field visualization hardware. The new systems support complex test programs that require sophisticated test sequences and precise management of process fluids. Furthermore, the new systems, such as the real-time angle of attack system and the new programmable logic controller enhance the test efficiency of the facility. The motivation for the upgrades and the expanded capabilities is described here.

Low thermal expansion seal ring support

DOEpatents

Dewis, David W.; Glezer, Boris

2000-01-01

Today, the trend is to increase the temperature of operation of gas turbine engines. To cool the components with compressor discharge air, robs air which could otherwise be used for combustion and creates a less efficient gas turbine engine. The present low thermal expansion sealing ring support system reduces the quantity of cooling air required while maintaining life and longevity of the components. Additionally, the low thermal expansion sealing ring reduces the clearance "C","C'" demanded between the interface between the sealing surface and the tip of the plurality of turbine blades. The sealing ring is supported by a plurality of support members in a manner in which the sealing ring and the plurality of support members independently expand and contract relative to each other and to other gas turbine engine components.

SQL is Dead; Long-live SQL: Relational Database Technology in Science Contexts

NASA Astrophysics Data System (ADS)

Howe, B.; Halperin, D.

2014-12-01

Relational databases are often perceived as a poor fit in science contexts: Rigid schemas, poor support for complex analytics, unpredictable performance, significant maintenance and tuning requirements --- these idiosyncrasies often make databases unattractive in science contexts characterized by heterogeneous data sources, complex analysis tasks, rapidly changing requirements, and limited IT budgets. In this talk, I'll argue that although the value proposition of typical relational database systems are weak in science, the core ideas that power relational databases have become incredibly prolific in open source science software, and are emerging as a universal abstraction for both big data and small data. In addition, I'll talk about two open source systems we are building to "jailbreak" the core technology of relational databases and adapt them for use in science. The first is SQLShare, a Database-as-a-Service system supporting collaborative data analysis and exchange by reducing database use to an Upload-Query-Share workflow with no installation, schema design, or configuration required. The second is Myria, a service that supports much larger scale data, complex analytics, and supports multiple back end systems. Finally, I'll describe some of the ways our collaborators in oceanography, astronomy, biology, fisheries science, and more are using these systems to replace script-based workflows for reasons of performance, flexibility, and convenience.

LH2 airport requirements study

NASA Technical Reports Server (NTRS)

Brewer, G. D. (Editor)

1976-01-01

A preliminary assessment of the facilities and equipment which will be required at a representative airport is provided so liquid hydrogen LH2 can be used as fuel in long range transport aircraft in 1995-2000. A complete facility was conceptually designed, sized to meet the projected air traffic requirement. The facility includes the liquefaction plant, LH2, storage capability, and LH2 fuel handling system. The requirements for ground support and maintenance for the LH2 fueled aircraft were analyzed. An estimate was made of capital and operating costs which might be expected for the facility. Recommendations were made for design modifications to the reference aircraft, reflecting results of the analysis of airport fuel handling requirements, and for a program of additional technology development for air terminal related items.

Nuclear electric propulsion development and qualification facilities

NASA Technical Reports Server (NTRS)

Dutt, D. S.; Thomassen, K.; Sovey, J.; Fontana, Mario

1991-01-01

This paper summarizes the findings of a Tri-Agency panel consisting of members from the National Aeronautics and Space Administration (NASA), U.S. Department of Energy (DOE), and U.S. Department of Defense (DOD) that were charged with reviewing the status and availability of facilities to test components and subsystems for megawatt-class nuclear electric propulsion (NEP) systems. The facilities required to support development of NEP are available in NASA centers, DOE laboratories, and industry. However, several key facilities require significant and near-term modification in order to perform the testing required to meet a 2014 launch date. For the higher powered Mars cargo and piloted missions, the priority established for facility preparation is: (1) a thruster developmental testing facility, (2) a thruster lifetime testing facility, (3) a dynamic energy conversion development and demonstration facility, and (4) an advanced reactor testing facility (if required to demonstrate an advanced multiwatt power system). Facilities to support development of the power conditioning and heat rejection subsystems are available in industry, federal laboratories, and universities. In addition to the development facilities, a new preflight qualifications and acceptance testing facility will be required to support the deployment of NEP systems for precursor, cargo, or piloted Mars missions. Because the deployment strategy for NEP involves early demonstration missions, the demonstration of the SP-100 power system is needed by the early 2000's.

Neurophysiology and Neuroanatomy of Reflexive and Volitional Saccades: Evidence from Studies of Humans

PubMed Central

McDowell, Jennifer E.; Dyckman, Kara A.; Austin, Benjamin; Clementz, Brett A.

2008-01-01

This review provides a summary of the contributions made by human functional neuroimaging studies to the understanding of neural correlates of saccadic control. The generation of simple visually-guided saccades (redirections of gaze to a visual stimulus or prosaccades) and more complex volitional saccades require similar basic neural circuitry with additional neural regions supporting requisite higher level processes. The saccadic system has been studied extensively in non-human primates (e.g. single unit recordings) and humans (e.g. lesions and neuroimaging). Considerable knowledge of this system’s functional neuroanatomy makes it useful for investigating models of cognitive control. The network involved in prosaccade generation (by definition exogenously-driven) includes subcortical (striatum, thalamus, superior colliculus, and cerebellar vermis) and cortical structures (primary visual, extrastriate, and parietal cortices, and frontal and supplementary eye fields). Activation in these regions is also observed during endogenously-driven voluntary saccades (e.g. antisaccades, ocular motor delayed response or memory saccades, predictive tracking tasks and anticipatory saccades, and saccade sequencing), all of which require complex cognitive processes like inhibition and working memory. These additional requirements are supported by changes in neural activity in basic saccade circuitry and by recruitment of additional neural regions (such as prefrontal and anterior cingulate cortices). Activity in visual cortex is modulated as a function of task demands and may predict the type of saccade to be generated, perhaps via top-down control mechanisms. Neuroimaging studies suggest two foci of activation within FEF - medial and lateral - which may correspond to volitional and reflexive demands, respectively. Future research on saccade control could usefully (i) delineate important anatomical subdivisions that underlie functional differences, (ii) evaluate functional connectivity of anatomical regions supporting saccade generation using methods such as ICA and structural equation modeling, (iii) investigate how context affects behavior and brain activity, and (iv) use multi-modal neuroimaging to maximize spatial and temporal resolution. PMID:18835656

Study of guidance techniques for aerial application of agricultural compounds

NASA Technical Reports Server (NTRS)

Caldwell, J. D.; Dimmock, P. B. A.; Watkins, R. H.

1980-01-01

Candidate systems were identified for evaluation of suitability in meeting specified accuracy requirements for a swath guidance system in an agriculture aircraft. Further examination reduced the list of potential candidates to a single category, i.e., transponder type systems, for detailed evaluation. Within this category three systems were found which met the basic accuracy requirements of the work statement. The Flying Flagman, the Electronic Flagging and the Raydist Director System. In addition to evaluating the systems against the specified requirements, each system was compared with the other two systems on a relative basis. The conclusions supported by the analyses show the Flying Flagman system to be the most suitable system currently available to meet the requirements.

Conceptual design studies of control and instrumentation systems for ignition experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nicholson, P.J.; Dewolf, J.B.; Heinemann, P.C.

1978-03-01

Studies at the Charles Stark Draper Laboratory in the past year were a continuation of prior studies of control and instrumentation systems for current and next generation Tokomaks. Specifically, the FY 77 effort has focused on the following two main efforts: (1) control requirements--(a) defining and evolving control requirements/concepts for a prototype experimental power reactor(s), and (b) defining control requirements for diverters and mirror machines, specifically the MX; and (2) defining requirements and scoping design for a functional control simulator. Later in the year, a small additional task was added: (3) providing analysis and design support to INESCO for itsmore » low cost fusion power system, FPC/DMT.« less

The impact of embedded support for underprepared students in a college chemistry course

NASA Astrophysics Data System (ADS)

Hesser, Tiffany L.

This quasi-experimental study examined the impact of embedded support on academic success for students requiring remediation in college chemistry. Additional support for underprepared students incorporated within a course is recommended by Connecticut's Public Act 12-40, An Act Concerning College Readiness and Completion. For this study, embedded support consisted of weekly instructional support sessions and introduced the concepts of metacognitive awareness and motivation in learning. Students' progression through the course was measured using a series of standardized questions. Metacognitive awareness and motivation levels were measure at the start and completion of the semester using the Metacognitive Awareness Inventory (MAI) and Motivated Student Learning Questionnaire (MSLQ). It was found that with embedded support, underprepared students performed academically at a level equivalent to that of their college-ready peers. Based on these results, this embedded support model as an evidence-based practice should be considered in class development or policies surrounding students identified as underprepared.

Planetary Protection Considerations for Life Support and Habitation Systems

NASA Technical Reports Server (NTRS)

Barta, Daniel J.; Hogan, John A.

2010-01-01

Life support systems for future human missions beyond low Earth orbit may include a combination of existing hardware components and advanced technologies. Discipline areas for technology development include atmosphere revitalization, water recovery, solid waste management, crew accommodations, food production, thermal systems, environmental monitoring, fire protection and radiation protection. Life support systems will be influenced by in situ resource utilization (ISRU), crew mobility and the degree of extravehicular activity. Planetary protection represents an additional set of requirements that technology developers have generally not considered. Planetary protection guidelines will affect the kind of operations, processes, and functions that can take place during future exploration missions, including venting and discharge of liquids and solids, ejection of wastes, use of ISRU, requirements for cabin atmospheric trace contaminant concentrations, cabin leakage and restrictions on what materials, organisms, and technologies that may be brought on missions. Compliance with planetary protection requirements may drive development of new capabilities or processes (e.g. in situ sterilization, waste containment, contaminant measurement) and limit or prohibit certain kinds of operations or processes (e.g. unfiltered venting). Ultimately, there will be an effect on mission costs, including the mission trade space. Planetary protection requirements need to be considered early in technology development programs. It is expected that planetary protection will have a major impact on technology selection for future missions.

Swa2, the yeast homolog of mammalian auxilin, is specifically required for the propagation of the prion variant [URE 3‐1

PubMed Central

Troisi, Elizabeth M.; Rockman, Michael E.; Nguyen, Phil P.; Oliver, Emily E.

2015-01-01

Summary Yeast prions require a core set of chaperone proteins including Sis1, Hsp70 and Hsp104 to generate new amyloid templates for stable propagation, yet emerging studies indicate that propagation of some prions requires additional chaperone activities, demonstrating chaperone specificity beyond the common amyloid requirements. To comprehensively assess such prion‐specific requirements for the propagation of the [URE 3] prion variant [URE 3‐1], we screened 12 yeast cytosolic J‐proteins, and here we report a novel role for the J‐protein Swa2/Aux1. Swa2 is the sole yeast homolog of the mammalian protein auxilin, which, like Swa2, functions in vesicle‐mediated endocytosis by disassembling the structural lattice formed by the protein clathrin. We found that, in addition to Sis1, [URE 3‐1] is specifically dependent upon Swa2, but not on any of the 11 other J‐proteins. Further, we show that [URE 3‐1] propagation requires both a functional J‐domain and the tetratricopeptide repeat (TPR) domain, but surprisingly does not require Swa2‐clathrin binding. Because the J‐domain of Swa2 can be replaced with the J‐domains of other proteins, our data strongly suggest that prion‐chaperone specificity arises from the Swa2 TPR domain and supports a model where Swa2 acts through Hsp70, most likely to provide additional access points for Hsp104 to promote prion template generation. PMID:26031938

Navigation Operations for the Magnetospheric Multiscale Mission

NASA Technical Reports Server (NTRS)

Long, Anne; Farahmand, Mitra; Carpenter, Russell

2015-01-01

The Magnetospheric Multiscale (MMS) mission employs four identical spinning spacecraft flying in highly elliptical Earth orbits. These spacecraft will fly in a series of tetrahedral formations with separations of less than 10 km. MMS navigation operations use onboard navigation to satisfy the mission definitive orbit and time determination requirements and in addition to minimize operations cost and complexity. The onboard navigation subsystem consists of the Navigator GPS receiver with Goddard Enhanced Onboard Navigation System (GEONS) software, and an Ultra-Stable Oscillator. The four MMS spacecraft are operated from a single Mission Operations Center, which includes a Flight Dynamics Operations Area (FDOA) that supports MMS navigation operations, as well as maneuver planning, conjunction assessment and attitude ground operations. The System Manager component of the FDOA automates routine operations processes. The GEONS Ground Support System component of the FDOA provides the tools needed to support MMS navigation operations. This paper provides an overview of the MMS mission and associated navigation requirements and constraints and discusses MMS navigation operations and the associated MMS ground system components built to support navigation-related operations.

The role of the National Launch System in support of Space Station Freedom

NASA Technical Reports Server (NTRS)

Green, J. L.; Saucillo, R. J.; Cirillo, W. M.

1992-01-01

A study was performed to determine the most appropriate potential use of the National Launch System (NLS) for Space Station Freedom (SSF) logistics resupply and growth assembly needs. Objectives were to estimate earth-to-SSF cargo requirements, identify NLS sizing trades, and assess operational constraints of a shuttle and NLS transportation infrastructure. Detailed NLS and Shuttle flight manifests were developed to model varying levels of NLS support. NLS delivery of SSF propellant, and in some cases, cryoenic fluids, yield significant shuttle flight savings with minimum impact to the baseline SSF design. Additional cargo can be delivered by the NLS if SSF trash disposal techniques are employed to limit return cargo requirements. A common vehicle performance level can be used for both logistics resupply and growth hardware delivery.

A development of logistics management models for the Space Transportation System

NASA Technical Reports Server (NTRS)

Carrillo, M. J.; Jacobsen, S. E.; Abell, J. B.; Lippiatt, T. F.

1983-01-01

A new analytic queueing approach was described which relates stockage levels, repair level decisions, and the project network schedule of prelaunch operations directly to the probability distribution of the space transportation system launch delay. Finite source population and limited repair capability were additional factors included in this logistics management model developed specifically for STS maintenance requirements. Data presently available to support logistics decisions were based on a comparability study of heavy aircraft components. A two-phase program is recommended by which NASA would implement an integrated data collection system, assemble logistics data from previous STS flights, revise extant logistics planning and resource requirement parameters using Bayes-Lin techniques, and adjust for uncertainty surrounding logistics systems performance parameters. The implementation of these recommendations can be expected to deliver more cost-effective logistics support.

Implementation of the MSAT network in Canada

NASA Astrophysics Data System (ADS)

Roscoe, Orest S.

1991-10-01

MSAT will be launched into geostationary orbit at 106.5 degrees west longitude. It will have an aggregate EIRP in excess of 57 dBw, making it the highest powered mobile satellite launched or planned to date. The MSAT ground segment will comprise hundreds of thousands of mobile terminals, as well as numerous feederlink earth stations. This requires a large scale network control system which is unprecedented in a satellite environment. The network control system must support circuit-switched voice and data services and packet-switched data services. In addition to assignment of capacity on demand, the control system must be able to support a variety of service features required by customers, as well as record information for billing. It must operate in a multi-beam, multi-satellite environment as the system grows.

Providing indigent care: strategic issues in management, marketing and ethics.

PubMed

Summers, J

1986-08-01

Uncompensated cares poses considerable management, marketing and ethical challenges to health care managers. A variety of responses are examined which offer the possibility of reducing the need for inpatient care and the cost of that care as well as for the enhancement of the organization's positioning in the marketing and sales environment. Some of the programs will require support from local community agencies or employers, but others will be quite feasible without such support. Additionally, the programs build on sensitivity to the hospital mission as opposed to turning away from it.

Monitoring Coastal Marshes for Persistent Saltwater Intrusion

NASA Technical Reports Server (NTRS)

Kalcic, Maria; Hall, Callie; Fletcher, Rose; Russell, Jeff

2009-01-01

Primary goal: Provide resource managers with remote sensing products that support ecosystem forecasting models requiring salinity and inundation data. Work supports the habitat-switching modules in the Coastal Louisiana Ecosystem Assessment and Restoration (CLEAR) model, which provides scientific evaluation for restoration management (Visser et al., 2008). Ongoing work to validate flooding with radar (NWRC/USGS) and enhance persistence estimates through "fusion" of MODIS and Landsat time series (ROSES A.28 Gulf of Mexico). Additional work will also investigate relationship between saltwater dielectric constant and radar returns (Radarsat) (ROSES A.28 Gulf of Mexico).

Testing and Oxygen Assessment Results for a Next Generation Extravehicular Activity Portable Life Support System Fan

NASA Technical Reports Server (NTRS)

Paul, Heather L.; Jennings, Mallory A.; Rivera, Fatonia L.; Martin, Devin

2011-01-01

NASA is designing a next generation Extravehicular Activity (EVA) Portable Life Support System (PLSS) for use in future surface exploration endeavors. To meet the new requirements for ventilation flow at nominal and buddy modes, a fan has been developed and tested. This paper summarizes the results of the performance and life cycle testing efforts conducted at the NASA Johnson Space Center. Additionally, oxygen compatibility assessment results from an evaluation conducted at White Sands Test Facility (WSTF) are provided, and lessons learned and future recommendations are outlined.

Whose job? The staffing of advance care planning support in twelve international healthcare organizations: a qualitative interview study.

PubMed

Dixon, Josie; Knapp, Martin

2018-05-24

ACP involving a facilitated conversation with a health or care professional is more effective than document completion alone. In policy, there is an expectation that health and care professionals will provide ACP support, commonly within their existing roles. However, the potential contributions of different professionals are outlined only broadly in policy and guidance. Research on opportunities and barriers for involving different professionals in providing ACP support, and feasible models for doing so, is currently lacking. We identified twelve healthcare organizations aiming to offer system-wide ACP support in the United States, Canada, Australia and New Zealand. In each, we conducted an average 13 in-depth interviews with senior managers, ACP leads, dedicated ACP facilitators, physicians, nurses, social workers and other clinical and non-clinical staff. Interviews were analyzed thematically using NVivo software. Organizations emphasized leadership for ACP support, including strategic support from senior managers and intensive day-to-day support from ACP leads, to support staff to deliver ACP support within their existing roles. Over-reliance on dedicated facilitators was not considered sustainable or scalable. We found many professionals, from all backgrounds, providing ACP support. However, there remained barriers, particularly for facilitating ACP conversations. A significant barrier for all professionals was lack of time. Physicians sometimes had poor communication skills, misunderstood medico-legal aspects and tended to have conversations of limited scope late in the disease trajectory. However, they could also have concerns about the appropriateness of ACP conversations conducted by others. Social workers had good facilitation skills and understood legal aspects but needed more clinical support than nurses. While ACP support provided alongside and as part of other care was common, ACP conversations in this context could easily get squeezed out or become fragmented. Referrals to other professionals could be insecure. Team-based models involving a physician and a nurse or social worker were considered cost-effective and supportive of good quality care but could require some additional resource. Effective staffing of ACP support is likely to require intensive local leadership, attention to physician concerns while avoiding an entirely physician-led approach, some additional resource and team-based frameworks, including in evolving models of care for chronic illness and end of life.

Mission simulation as an approach to develop requirements for automation in Advanced Life Support Systems

NASA Technical Reports Server (NTRS)

Erickson, J. D.; Eckelkamp, R. E.; Barta, D. J.; Dragg, J.; Henninger, D. L. (Principal Investigator)

1996-01-01

This paper examines mission simulation as an approach to develop requirements for automation and robotics for Advanced Life Support Systems (ALSS). The focus is on requirements and applications for command and control, control and monitoring, situation assessment and response, diagnosis and recovery, adaptive planning and scheduling, and other automation applications in addition to mechanized equipment and robotics applications to reduce the excessive human labor requirements to operate and maintain an ALSS. Based on principles of systems engineering, an approach is proposed to assess requirements for automation and robotics using mission simulation tools. First, the story of a simulated mission is defined in terms of processes with attendant types of resources needed, including options for use of automation and robotic systems. Next, systems dynamics models are used in simulation to reveal the implications for selected resource allocation schemes in terms of resources required to complete operational tasks. The simulations not only help establish ALSS design criteria, but also may offer guidance to ALSS research efforts by identifying gaps in knowledge about procedures and/or biophysical processes. Simulations of a planned one-year mission with 4 crewmembers in a Human Rated Test Facility are presented as an approach to evaluation of mission feasibility and definition of automation and robotics requirements.

Word-Problem-Solving Strategy for Minority Students at Risk for Math Difficulties

ERIC Educational Resources Information Center

Kong, Jennifer E.; Orosco, Michael J.

2016-01-01

Minority students at risk for math difficulties (MD) struggle with word problems for various reasons beyond procedural or calculation challenges. As a result, these students require support in reading and language development in addition to math. The purpose of this study was to assess the effectiveness of a math comprehension strategy based on a…

Especially Social: Exploring the Use of an iOS Application in Special Needs Classrooms

ERIC Educational Resources Information Center

Campigotto, Rachelle; McEwen, Rhonda; Epp, Carrie Demmans

2013-01-01

A five-month exploratory study was conducted with iOS mobile devices in two Toronto area schools with students in grades 7 through 12. Both classrooms were identified as Special Education classes by the Ontario Ministry of Education, and each student was identified as having exceptionalities requiring additional support and differentiation within…

Coral Reefs, Convicts, Cadavers, Coffee Shops and Couture: Customizing Experiential Learning to Increase Comfort and Engagement

ERIC Educational Resources Information Center

Grabowsky, Gail L.; Hargis, Jace; Davidson, Janet; Paynter, Allison; Suh, Junghwa; Wright, Claire

2017-01-01

Experiential learning (EL) can offer a high impact educational opportunity that benefits students from diverse backgrounds, creating an inclusive learning environment. Barriers to the generalization of EL can include a lack of institutional support, risk avoidance, time, and faculty instructional ability. As well EL require additional efforts from…

Collaboration, Communication, and Connection: Collegial Support and Collective Efficacy among Health Science Teachers

ERIC Educational Resources Information Center

Loera, Gustavo; Nakamoto, Jonathan; Rueda, Robert; Oh, Youn Joo; Beck, Cindy; Cherry, Carla

2013-01-01

The social and collaborative aspects of work settings are becoming increasingly important. For example, recent research has placed emphasis on the social nature of learning. In addition, many authors have suggested that 21st century skills that will be required in future work and professional environments will involve collaborative skills, making…

Digital Avionics Information System (DAIS): Impact of DAIS Concept on Life Cycle Cost--Supplement. Final Report.

ERIC Educational Resources Information Center

Goclowski, John C.; And Others

This supplement to a technical report providing the results of a preliminary investigation of the potential impact of the Digital Avionics Information System (DAIS) concept on system support personnel requirements and life cycle cost (LCC) includes: (1) additional details of the cost comparison of a hypothetical application of a conceptual…

A Technique for Choosing Cost-Effective Instructional Delivery Systems

DTIC Science & Technology

1975-04-01

Braby, Ed.D. James M. Henry William F. Parrish, Jr. William M. Swope, Ph.D. Trainino Analysis and Evaluatton Group April 1975 GOVERNMENT RIGHTS IN DATA ...11 Required Reference Materials .... .............. .. 15 -Additional Supporting Data ...... ............... 17 Post Note...Limitations. . 75.. APPENDIX I-Fortran Program of Cost Model ................. 8 ATTACHMENT 1 Cost Data Collection Form .... .............. .113 3

Between Counting and Multiplication: Low-Attaining Students' Spatial Structuring, Enumeration and Errors in Concretely-Presented 3D Array Tasks

ERIC Educational Resources Information Center

Finesilver, Carla

2017-01-01

The move from additive to multiplicative thinking requires significant change in children's comprehension and manipulation of numerical relationships, involves various conceptual components, and can be a slow, multistage process for some. Unit arrays are a key visuospatial representation for supporting learning, but most research focuses on 2D…

Adjustment to the First Year in School--A Singapore Perspective

ERIC Educational Resources Information Center

Yeo, Lay See; Clarke, Christine

2006-01-01

This paper investigates the concept of adjustment to school for a group of primary one (first grade) pupils in Singapore. Pupils rated by their teachers as being well adjusted obtained significantly higher grades at the end of the school year, did not require additional learning support, and exhibited better social skills compared to children…

Implementation plan for HANDI 2000 TWRS master equipment list

DOE Office of Scientific and Technical Information (OSTI.GOV)

BENNION, S.I.

This document presents the implementation plan for an additional deliverable of the HANDI 2000 Project. The PassPort Equipment Data module processes include those portions of the COTS PassPort system required to support tracking and management of the Master Equipment List for Lockheed Martin Hanford Company (LMHC) and custom software created to work with the COTS products.

Enhancing Junior Faculty Research Productivity through Multiinstitution Collaboration: Participants' Impressions of the School Psychology Research Collaboration Conference

ERIC Educational Resources Information Center

Rush, S. Craig; Wheeler, Joanna

2011-01-01

In addition to teaching and service responsibilities, junior faculty members are required to be productive researchers. Despite the demand on junior faculty to produce published research, studies suggest that they often do not receive adequate assistance with their research endeavors. Mentoring is an effective form of support for junior faculty…

1997 Graduate Student Researchers Program

NASA Technical Reports Server (NTRS)

1996-01-01

In 1980, NASA initiated the Graduate Student Research Program (GSRP) to cultivate additional research ties to the academic community and to support a culturally diverse group of students pursuing advanced degrees in science and engineering. Eligibility requirements for this program are described, and program administrators are listed. Research areas are detailed for NASA Headquarters and all Research and Flight Centers.

Continuing professional education: Status, trends, and issues related to electronic delivery

NASA Technical Reports Server (NTRS)

Rothenberg, D.

1975-01-01

Four professional groups, teachers, doctors, lawyers, and engineers were examined to determine if they constitute a potential market for continuing professional education via large scale electronic technology. Data were collected in view of social and economic forces, such as mandatory periodic relicensure, additional course requirements for certification, or the economic health of supporting industries.

49 CFR 1103.3 - Persons not attorneys-at-law-qualifications and requirements for practice before the Board.

Code of Federal Regulations, 2010 CFR

2010-10-01

... secondary education and must possess technical knowledge, training or experience in the field of transportation which is regarded by the Board as the equivalent of 2 additional years of college education; (2... transportation for at least one year. An applicant's statement of college education must be supported by a...

Creating and Analyzing the Effectiveness of a Mathematics Placement Policy for New Freshmen

ERIC Educational Resources Information Center

Denny, Jeffrey K.; Nelson, David G.; Zhao, Martin Q.

2012-01-01

In the mid-1990s, Mercer University's undergraduate schools placed incoming freshmen in their first mathematics course, using only their scores on the mathematics portion of the SAT (SATM). This placement policy was strongly supported by the admissions office because it did not require additional testing of the freshmen in their on-campus summer…

A Phenomenological Study of the Experiences of Helping Professionals with Learning Disabilities

ERIC Educational Resources Information Center

Peters, Madeline Lorraine

2010-01-01

The purpose of this study is to explore the extent, to which professionals in helping professions (PHPS) with learning disabilities are able to name the support, services, and assistance that they require to successfully engage in the full range of activities for their daily living. Additionally, the study explores how PHPS describe their…

Potential of derived lunar volatiles for life support

NASA Technical Reports Server (NTRS)

Bula, R. J.; Wittenberg, L. J.; Tibbitts, T. W.; Kulcinski, G. L.

1992-01-01

The lunar regolith contains small quantities of solar wind implanted volatile compounds that have vital, basic uses for maintaining life support systems of lunar or space settlements. Recent proposals to utilize the helium-3 isotope (He-3) derived from the lunar regolith as a fuel for fusion reactors would result in the availability of large quantities of other lunar volatile compounds. The quantities obtained would provide the annual life support replacement requirements of 1150 to 23,000 inhabitants per ton of He-3 recovered, depending on the volatile compound. Utilization of the lunar volatile compounds for life support depends on the costs, in terms of materials and energy, associated with their extraction from the lunar regolith as compared to the delivery costs of these compounds from Earth resources. Considering today's conservative estimated transportation costs ($10,000 dollars per kilogram) and regolith mining costs ($5 dollars per ton), the life support replacement requirements could be more economically supplied by recovering the lunar volatile compounds than transporting these materials from Earth resources, even before He-3 will be utilized as a fusion fuel. In addition, availability of lunar volatile compounds could have a significant cost impact on maintaining the life support systems of the space station and a Mars base.

Operation and maintenance requirements of the Army Remotely Piloted Vehicle (RPV)

NASA Technical Reports Server (NTRS)

1983-01-01

The Remotely Piloted Vehicle (RPV) system is being developed to provide the Army with a target acquistion, target location, and laser designation capability that will significantly enhance the effectiveness of the artillery. Iterative analyses of the manpower, personnel, and training (MPT) requirements for an RPV system configured to accommodate both a daylight television and a forward looking infrared (FLIR) mission payload subsystem (FMPS) and related support subsystems are examined. Additionally, this analysis incorporates a 24 hour-a-day operational scenario. Therefore, the information presented was developed with a view towards delineating the differences (or deltas) imposed by the new requirements resulting from FMPS/24 hour operating day functions.

Psychosocial burden and desire for support in outpatients with skin cancer.

PubMed

Buchhold, Britta; Wiesmann, Ulrich; Bahlmann, Johannes; Lutze, Stine; Eggert, Claudia; Arnold, Andreas; Daeschlein, Georg; Jünger, Michael; Hannich, Hans-Joachim

2016-04-01

An important basis for adequate psycho-oncological and psychosocial care of cancer patients is the regular assessment of their psychosocial distress and thus their need for care. For this purpose, there are numerous questionnaires available. The objective of the present study was to assess whether distressed patients require professional support and which screening instrument outpatients with skin cancer prefer. In a cross-sectional survey, we asked outpatients with skin cancer to fill out three questionnaires assessing psychosocial stress, and to indicate which one they considered most adequate. Patients were offered the following three instruments: Hornheide Questionnaire (27 items), Hornheide Screening Instrument (7 items), and the Distress Thermometer. In addition, we inquired about the patients' desire for support. (1) Comparing subjective distress and patients' declared desire for support revealed a marked divergence. While one-third of the 137 patients were identified as being in need of care, only 11.5% of the sample requested such support. (2) 63.7% of patients chose the long version of the Hornheide Questionnaire. In addition to their psychosocial burden, patients' desire for support should be assessed. Moreover, apart from screening tools, other ways to provide access to psychosocial care should be considered. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

Requirements for data integration platforms in biomedical research networks: a reference model.

PubMed

Ganzinger, Matthias; Knaup, Petra

2015-01-01

Biomedical research networks need to integrate research data among their members and with external partners. To support such data sharing activities, an adequate information technology infrastructure is necessary. To facilitate the establishment of such an infrastructure, we developed a reference model for the requirements. The reference model consists of five reference goals and 15 reference requirements. Using the Unified Modeling Language, the goals and requirements are set into relation to each other. In addition, all goals and requirements are described textually in tables. This reference model can be used by research networks as a basis for a resource efficient acquisition of their project specific requirements. Furthermore, a concrete instance of the reference model is described for a research network on liver cancer. The reference model is transferred into a requirements model of the specific network. Based on this concrete requirements model, a service-oriented information technology architecture is derived and also described in this paper.

Evaluation of a pet-assisted living intervention for improving functional status in assisted living residents with mild to moderate cognitive impairment: a pilot study.

PubMed

Friedmann, Erika; Galik, Elizabeth; Thomas, Sue A; Hall, P Sue; Chung, Seon Yoon; McCune, Sandra

2015-05-01

In older adults with cognitive impairment (CI), decreased functional status and increased behavioral symptoms require relocation from assisted living (AL) to nursing homes. Studies support positive effects of pets on health/function. Evaluate the effectiveness of the Pet AL (PAL) intervention to support physical, behavioral, and emotional function in AL residents with CI. Cognitively impaired AL residents randomized to 60-90 minute sessions [PAL (n = 22) or reminiscing (n = 18)] twice/week for 12 weeks. PAL interventionist encourages residents to perform skills with the visiting dog; reminiscing interventionist encourages residents to reminisce. Monthly assessment of physical (energy expenditure, activities of daily living), emotional (depression, apathy), and behavioral (agitation) function. In linear mixed models, physical activity depressive symptoms improved more with PAL. Evidence supports that the PAL program helps preserve/enhance function of AL residents with CI. Additional study is required to evaluate the duration and predictors of effectiveness of the PAL intervention. © The Author(s) 2014.

Putting ROSE to Work: A Proposed Application of a Request-Oriented Scheduling Engine for Space Station Operations

NASA Technical Reports Server (NTRS)

Jaap, John; Muery, Kim

2000-01-01

Scheduling engines are found at the core of software systems that plan and schedule activities and resources. A Request-Oriented Scheduling Engine (ROSE) is one that processes a single request (adding a task to a timeline) and then waits for another request. For the International Space Station, a robust ROSE-based system would support multiple, simultaneous users, each formulating requests (defining scheduling requirements), submitting these requests via the internet to a single scheduling engine operating on a single timeline, and immediately viewing the resulting timeline. ROSE is significantly different from the engine currently used to schedule Space Station operations. The current engine supports essentially one person at a time, with a pre-defined set of requirements from many payloads, working in either a "batch" scheduling mode or an interactive/manual scheduling mode. A planning and scheduling process that takes advantage of the features of ROSE could produce greater customer satisfaction at reduced cost and reduced flow time. This paper describes a possible ROSE-based scheduling process and identifies the additional software component required to support it. Resulting changes to the management and control of the process are also discussed.

Drug metabolism and hypersensitivity reactions to drugs.

PubMed

Agúndez, José A G; Mayorga, Cristobalina; García-Martin, Elena

2015-08-01

The aim of the present review was to discuss recent advances supporting a role of drug metabolism, and particularly of the generation of reactive metabolites, in hypersensitivity reactions to drugs. The development of novel mass-spectrometry procedures has allowed the identification of reactive metabolites from drugs known to be involved in hypersensitivity reactions, including amoxicillin and nonsteroidal antiinflammatory drugs such as aspirin, diclofenac or metamizole. Recent studies demonstrated that reactive metabolites may efficiently bind plasma proteins, thus suggesting that drug metabolites, rather than - or in addition to - parent drugs, may elicit an immune response. As drug metabolic profiles are often determined by variability in the genes coding for drug-metabolizing enzymes, it is conceivable that an altered drug metabolism may predispose to the generation of reactive drug metabolites and hence to hypersensitivity reactions. These findings support the potential for the use of pharmacogenomics tests in hypersensitivity (type B) adverse reactions, in addition to the well known utility of these tests in type A adverse reactions. Growing evidence supports a link between genetically determined drug metabolism, altered metabolic profiles, generation of highly reactive metabolites and haptenization. Additional research is required to developing robust biomarkers for drug-induced hypersensitivity reactions.

Controller design for wind turbine load reduction via multiobjective parameter synthesis

NASA Astrophysics Data System (ADS)

Hoffmann, A. F.; Weiβ, F. A.

2016-09-01

During the design process for a wind turbine load reduction controller many different, sometimes conflicting requirements must be fulfilled simultaneously. If the requirements can be expressed as mathematical criteria, such a design problem can be solved by a criterion-vector and multi-objective design optimization. The software environment MOPS (Multi-Objective Parameter Synthesis) supports the engineer for such a design optimization. In this paper MOPS is applied to design a multi-objective load reduction controller for the well-known DTU 10 MW reference wind turbine. A significant reduction in the fatigue criteria especially the blade damage can be reached by the use of an additional Individual Pitch Controller (IPC) and an additional tower damper. This reduction is reached as a trade-off with an increase of actuator load.

Propulsion/flight control integration technology (PROFIT) design analysis status

NASA Technical Reports Server (NTRS)

Carlin, C. M.; Hastings, W. J.

1978-01-01

The propulsion flight control integration technology (PROFIT) program was designed to develop a flying testbed dedicated to controls research. The preliminary design, analysis, and feasibility studies conducted in support of the PROFIT program are reported. The PROFIT system was built around existing IPCS hardware. In order to achieve the desired system flexibility and capability, additional interfaces between the IPCS hardware and F-15 systems were required. The requirements for additions and modifications to the existing hardware were defined. Those interfaces involving the more significant changes were studied. The DCU memory expansion to 32K with flight qualified hardware was completed on a brassboard basis. The uplink interface breadboard and a brassboard of the central computer interface were also tested. Two preliminary designs and corresponding program plans are presented.

Data mining approach identifies research priorities and data requirements for resolving the red algal tree of life.

PubMed

Verbruggen, Heroen; Maggs, Christine A; Saunders, Gary W; Le Gall, Line; Yoon, Hwan Su; De Clerck, Olivier

2010-01-20

The assembly of the tree of life has seen significant progress in recent years but algae and protists have been largely overlooked in this effort. Many groups of algae and protists have ancient roots and it is unclear how much data will be required to resolve their phylogenetic relationships for incorporation in the tree of life. The red algae, a group of primary photosynthetic eukaryotes of more than a billion years old, provide the earliest fossil evidence for eukaryotic multicellularity and sexual reproduction. Despite this evolutionary significance, their phylogenetic relationships are understudied. This study aims to infer a comprehensive red algal tree of life at the family level from a supermatrix containing data mined from GenBank. We aim to locate remaining regions of low support in the topology, evaluate their causes and estimate the amount of data required to resolve them. Phylogenetic analysis of a supermatrix of 14 loci and 98 red algal families yielded the most complete red algal tree of life to date. Visualization of statistical support showed the presence of five poorly supported regions. Causes for low support were identified with statistics about the age of the region, data availability and node density, showing that poor support has different origins in different parts of the tree. Parametric simulation experiments yielded optimistic estimates of how much data will be needed to resolve the poorly supported regions (ca. 103 to ca. 104 nucleotides for the different regions). Nonparametric simulations gave a markedly more pessimistic image, some regions requiring more than 2.8 105 nucleotides or not achieving the desired level of support at all. The discrepancies between parametric and nonparametric simulations are discussed in light of our dataset and known attributes of both approaches. Our study takes the red algae one step closer to meaningful inclusion in the tree of life. In addition to the recovery of stable relationships, the recognition of five regions in need of further study is a significant outcome of this work. Based on our analyses of current availability and future requirements of data, we make clear recommendations for forthcoming research.

Space Station Furnace Facility. Volume 2: Requirements Definition and Conceptual Design Study. Appendix 3: Environment Analysis. Volume 2; Appendix 3

NASA Technical Reports Server (NTRS)

1992-01-01

A Preliminary Safety Analysis (PSA) is being accomplished as part of the Space Station Furnace Facility (SSFF) contract. This analysis is intended to support SSFF activities by analyzing concepts and designs as they mature to develop essential safety requirements for inclusion in the appropriate specifications, and designs, as early as possible. In addition, the analysis identifies significant safety concerns that may warrant specific trade studies or design definition, etc. The analysis activity to date concentrated on hazard and hazard cause identification and requirements development with the goal of developing a baseline set of detailed requirements to support trade study, specifications development, and preliminary design activities. The analysis activity will continue as the design and concepts mature. Section 2 defines what was analyzed, but it is likely that the SSFF definitions will undergo further changes. The safety analysis activity will reflect these changes as they occur. The analysis provides the foundation for later safety activities. The hazards identified will in most cases have Preliminary Design Review (PDR) applicability. The requirements and recommendations developed for each hazard will be tracked to ensure proper and early resolution of safety concerns.

Structural analysis for preliminary design of High Speed Civil Transport (HSCT)

NASA Technical Reports Server (NTRS)

Bhatia, Kumar G.

1992-01-01

In the preliminary design environment, there is a need for quick evaluation of configuration and material concepts. The simplified beam representations used in the subsonic, high aspect ratio wing platform are not applicable for low aspect ratio configurations typical of supersonic transports. There is a requirement to develop methods for efficient generation of structural arrangement and finite element representation to support multidisciplinary analysis and optimization. In addition, empirical data bases required to validate prediction methods need to be improved for high speed civil transport (HSCT) type configurations.

Education, licensure, and certification of school nurses: position statement.

PubMed

2013-07-01

It is the position of the National Association of School Nurses (NASN) that every school-age child deserves a school nurse who has a baccalaureate degree in nursing from an accredited college or university and is licensed as a registered nurse through the state board of nursing. These requirements constitute minimal preparation needed to practice at the entry level of school nursing (American Nurses Association [ANA] & NASN, 2011). Additionally, NASN supports state school nurse certification, where required, and promotes national certification of school nurses through the National Board for Certification of School Nurses.

Universal Common Communication Substrate (UCCS) Specification; Universal Common Communication Substrate (UCCS) Implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Universal Common Communication Substrate (UCCS) is a low-level communication substrate that exposes high-performance communication primitives, while providing network interoperability. It is intended to support multiple upper layer protocol (ULPs) or programming models including SHMEM,UPC,Titanium,Co-Array Fortran,Global Arrays,MPI,GASNet, and File I/O. it provides various communication operations including one-sided and two-sided point-to-point, collectives, and remote atomic operations. In addition to operations for ULPs, it provides an out-of-band communication channel required typically required to wire-up communication libraries.

FOD Prevention at NASA-Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Lowrey, Nikki M.

2010-01-01

NASA-MSFC directive MID 5340.1 requires FOD prevention for all flight hardware projects, and requires all support organizations to comply. MSFC-STD-3598 implements a standard approach for FOD prevention, tailored from NAS 412. Three levels of FOD Sensitive Area are identified, adopting existing practices at other NASA facilities. Additional emphasis is given to prevention of impact damage and mitigation of facility FOD sources, especially leaks and spills. Impact Damage Susceptible (IDS) items are identified as FOD-sensitive as well as hardware vulnerable to entrapment of small items.

Gold nanoparticles supported on titanium dioxide: an efficient catalyst for highly selective synthesis of benzoxazoles and benzimidazoles.

PubMed

Tang, Lin; Guo, Xuefeng; Yang, Yu; Zha, Zhenggen; Wang, Zhiyong

2014-06-11

A highly efficient and selective reaction for the synthesis of 2-substituted benzoxazoles and benzimidazoles catalyzed by Au/TiO2 has been developed via two hydrogen-transfer processes. This reaction has a good tolerance to air and water, a wide substrate scope, and represents a new avenue for practical C-N and C-O bond formation. More importantly, no additional additives, oxidants and reductants are required for the reaction and the catalyst can be recovered and reused readily.

Supporting flight data analysis for Space Shuttle Orbiter Experiments at NASA Ames Research Center

NASA Technical Reports Server (NTRS)

Green, M. J.; Budnick, M. P.; Yang, L.; Chiasson, M. P.

1983-01-01

The Space Shuttle Orbiter Experiments program in responsible for collecting flight data to extend the research and technology base for future aerospace vehicle design. The Infrared Imagery of Shuttle (IRIS), Catalytic Surface Effects, and Tile Gap Heating experiments sponsored by Ames Research Center are part of this program. The paper describes the software required to process the flight data which support these experiments. In addition, data analysis techniques, developed in support of the IRIS experiment, are discussed. Using the flight data base, the techniques have provided information useful in analyzing and correcting problems with the experiment, and in interpreting the IRIS image obtained during the entry of the third Shuttle mission.

Supporting flight data analysis for Space Shuttle Orbiter experiments at NASA Ames Research Center

NASA Technical Reports Server (NTRS)

Green, M. J.; Budnick, M. P.; Yang, L.; Chiasson, M. P.

1983-01-01

The space shuttle orbiter experiments program is responsible for collecting flight data to extend the research and technology base for future aerospace vehicle design. The infrared imagery of shuttle (IRIS), catalytic surface effects, and tile gap heating experiments sponsored by Ames Research Center are part of this program. The software required to process the flight data which support these experiments is described. In addition, data analysis techniques, developed in support of the IRIS experiment, are discussed. Using the flight data base, the techniques provide information useful in analyzing and correcting problems with the experiment, and in interpreting the IRIS image obtained during the entry of the third shuttle mission.

Designing For Human Presence in Space: An Introduction to Environmental Control and Life Support Systems (ECLSS)

NASA Technical Reports Server (NTRS)

Wieland, P. O.

2005-01-01

Human exploration and utilization of space requires habitats to provide appropriate conditions for working and living. These conditions are provided by environmental control and life support systems (ECLSS) that ensure appropriate atmosphere composition, pressure, and temperature; manage and distribute water, process waste matter, provide fire detection and suppression; and other functions as necessary. The tables in appendix I of NASA RP 1324 "Designing for Human Presence in Space" summarize the life support functions and processes used onboard U.S. and U.S.S.R/Russian space habitats. These tables have been updated to include information on thermal control methods and to provide additional information on the ECLS systems.

Requiring influenza vaccination for health care workers: seven truths we must accept.

PubMed

Poland, Gregory A; Tosh, Pritish; Jacobson, Robert M

2005-03-18

In this paper we outline the seven primary truths supporting the call for requiring influenza immunization of all health care workers. We view this as a serious patient safety issue, given the clear and compelling data regarding the frequency and severity of influenza infection. In addition, clear-cut safety, efficacy, economic, legal, and ethical platforms support the use of influenza vaccine. Unfortunately health care workers have demonstrated, over almost 25 years that they are unwilling to comply with voluntary influenza immunization programs utilizing a variety of education and incentive programs, at rates sufficient to protect the patients in their care. We suggest that an annual influenza immunization should be required for every health care worker with direct patient contact, unless a medical contraindication or religious objection exists, or an informed declination is signed by the health care worker. High rates of health care worker immunization will benefit patients, health care workers, their families and employers, and the communities within which they work and live.

EDOS Evolution to Support NASA Future Earth Sciences Missions

NASA Technical Reports Server (NTRS)

Cordier, Guy R.; McLemore, Bruce; Wood, Terri; Wilkinson, Chris

2010-01-01

This paper presents a ground system architecture to service future NASA decadal missions and in particular, the high rate science data downlinks, by evolving EDOS current infrastructure and upgrading high rate network lines. The paper will also cover EDOS participation to date in formulation and operations concepts for the respective missions to understand the particular mission needs and derived requirements such as data volumes, downlink rates, data encoding, and data latencies. Future decadal requirements such as onboard data recorder management and file protocols drive the need to emulate these requirements within the ground system. The EDOS open system modular architecture is scalable to accommodate additional missions using the current sites antennas and future sites as well and meet the data security requirements and fulfill mission's objectives

Comparison of requirements and capabilities of major multipurpose software packages.

PubMed

Igo, Robert P; Schnell, Audrey H

2012-01-01

The aim of this chapter is to introduce the reader to commonly used software packages and illustrate their input requirements, analysis options, strengths, and limitations. We focus on packages that perform more than one function and include a program for quality control, linkage, and association analyses. Additional inclusion criteria were (1) programs that are free to academic users and (2) currently supported, maintained, and developed. Using those criteria, we chose to review three programs: Statistical Analysis for Genetic Epidemiology (S.A.G.E.), PLINK, and Merlin. We will describe the required input format and analysis options. We will not go into detail about every possible program in the packages, but we will give an overview of the packages requirements and capabilities.

The experience of physicians in pharmacogenomic clinical decision support within eight German university hospitals.

PubMed

Hinderer, Marc; Boeker, Martin; Wagner, Sebastian A; Binder, Harald; Ückert, Frank; Newe, Stephanie; Hülsemann, Jan L; Neumaier, Michael; Schade-Brittinger, Carmen; Acker, Till; Prokosch, Hans-Ulrich; Sedlmayr, Brita

2017-06-01

The aim of this study was to assess the physicians' attitude, their knowledge and their experience in pharmacogenomic clinical decision support in German hospitals. We conducted an online survey to address physicians of 13 different medical specialties across eight German university hospitals. In total, 564 returned questionnaires were analyzed. The remaining knowledge gap, the uncertainty of test reimbursement and the physicians' lack of awareness of existing pharmacogenomic clinical decision support systems (CDSS) are the major barriers for implementing pharmacogenomic CDSS into German hospitals. Furthermore, pharmacogenomic CDSS are most effective in the form of real-time decision support for internists. Physicians in German hospitals require additional education of both genetics and pharmacogenomics. They need to be provided with access to relevant pharmacogenomic CDSS.

NASA's Role in Aeronautics: A Workshop. Volume 2: Military aviation

NASA Technical Reports Server (NTRS)

1981-01-01

While the National Aeronautics and Space Act of 1958 makes DOD primarily responsible for military aeronautics, it stipulates a role for NASA in providing direct and indirect support for national defense. The existing role of NASA in support of military aeronautics is working well and is well coordinated. The role needs only to be kept effective and then improved by increasing its responsiveness to changing military requirements and by the selective application of additional people. Funding resources should also be made available to NASA for research. Specific roles that NASA could or should play were examined. It was determined that the most important areas for this support are in basic research, generic technology evolution, and facility support in the fields of aerodynamics, structures and materials, and propulsion.

The development of poly(vinyl chloride) [PVC] extrusions for a 14,000-ton self-supporting structure for the detection of neutrinos

DOE PAGES

Grudzinski, James J.; Talaga, Richard L.; Pla-Dalmau, Anna; ...

2014-12-16

The NOvA Neutrino Experiment has built a one of a kind self-supporting plastic structure, potentially the largest ever built. The PVC structure serves as a neutrino detector and is composed of 28 individual blocks that measure 15.5 m (51 feet) high by 15.5 m (51 feet) wide by 2.1 m (7 feet) deep. The primary parts in the detector construction are 15.5m (51 foot), 15-cell PVC extrusions. These extrusions from the basis of the detector modules which are laminated together in a crossed pattern to form the individual blocks and then filled with mineral oil based liquid scintillator. The self-supportingmore » nature of the detector places important structural requirements on both the PVC formulation and the extrusions. Block assembly requirements impose narrow geometric tolerances. Due to the method of detecting neutrinos, the extrusions must possess exceptionally high reflectivity over a particular wavelength range. The requirement places additional restrictions on the components of the PVC formulation. Altogether, the PVC extrusions have to maintain important reflectivity characteristics, provide structural support to the detector, and meet relatively tight geometric requirements for assembly. In order to meet these constraints, a custom PVC formulation had to be created and extruded. Here, we describe the purpose and requirements of the NOvA detector leading to the production of our unique PVC extrusion, summarize the R&D process, and discuss the lessons learned.« less

Significance of crown shape in the replacement of a central incisor with a single implant-supported crown.

PubMed

Gobbato, Luca; Paniz, Gianluca; Mazzocco, Fabio; Chierico, Andrea; Tsukiyama, Teppei; Levi, Paul A; Weisgold, Arnold S

2013-05-01

When utilizing a single implant-supported crown to replace a central incisor, understanding the final shape of the implant restoration is an important factor to help achieve a successful esthetic outcome. In today's dentistry, tooth shape is a critical factor when dental implant prostheses are considered in the esthetic zone. The major esthetic goal for this type of restoration is to achieve the closest possible symmetry with the adjacent tooth, both at the soft and at the hard tissue levels. The goal of this study was to objectively analyze the significance of natural crown shape when replacing a central incisor with a single implant-supported crown. In this study, we investigated the shape of the crowns of maxillary central incisors in 60 individuals who presented to our clinics with an untreatable central incisor. The presence of a dental diastema, "black triangle," presence or absence of gingival symmetry, and the presence or absence of dental symmetry were recorded in the pre- and postoperative photographs. Out of 60 patients, 33.3% had triangular-shaped crowns, 16.6% square/tapered, and 50% square-shaped crown form. After treatment was rendered, 65% of the triangular group, 40% of the square/tapered group, and 13.3% of the square group required an additional restoration on the adjacent central incisor in order to fulfill the esthetic needs of the patients. Data analysis revealed that if there is a "black triangle," a diastema, or presence of dental or gingival asymmetry, an additional restoration on the adjacent central incisor is often required in order to fulfill esthetic goals. The additional restoration is highly recommended in situations with a triangular crown shape, while it is suggested in cases of square/tapered and square tooth shapes in the presence of a dental diastema.

Flight deck engine advisor

NASA Technical Reports Server (NTRS)

Shontz, W. D.; Records, R. M.; Antonelli, D. R.

1992-01-01

The focus of this project is on alerting pilots to impending events in such a way as to provide the additional time required for the crew to make critical decisions concerning non-normal operations. The project addresses pilots' need for support in diagnosis and trend monitoring of faults as they affect decisions that must be made within the context of the current flight. Monitoring and diagnostic modules developed under the NASA Faultfinder program were restructured and enhanced using input data from an engine model and real engine fault data. Fault scenarios were prepared to support knowledge base development activities on the MONITAUR and DRAPhyS modules of Faultfinder. An analysis of the information requirements for fault management was included in each scenario. A conceptual framework was developed for systematic evaluation of the impact of context variables on pilot action alternatives as a function of event/fault combinations.

Space shuttle environmental control/life support systems

NASA Technical Reports Server (NTRS)

1972-01-01

This study analyzes and defines a baseline Environmental Control/Life Support System (EC/LSS) for a four-man, seven-day orbital shuttle. In addition, the impact of various mission parameters, crew size, mission length, etc. are examined for their influence on the selected system. Pacing technology items are identified to serve as a guide for application of effort to enhance the total system optimization. A fail safe-fail operation philosophy was utilized in designing the system. This has resulted in a system that requires only one daily routine operation. All other critical item malfunctions are automatically resolved by switching to redundant modes of operation. As a result of this study, it is evident that a practical, flexible, simple and long life, EC/LSS can be designed and manufactured for the shuttle orbiter within the time phase required.

Habitat and logistic support requirements for the initiation of a space manufacturing enterprise

NASA Technical Reports Server (NTRS)

Vajk, J. P.; Engel, J. H.; Shettler, J. A.

1979-01-01

A detailed scenario for the initiation of a space manufacturing enterprise using lunar materials to construct solar power satellites (SPS) was developed, with particular attention to habitat design and logistic support requirements. If SPS's can be constructed exclusively from lunar materials, the entire enterprise can be initiated in a 7 year period of launch activity (beginning as early as 1985) using the Space Shuttle and a low-cost, Shuttle-derived heavy lift vehicle. If additional chemical feedstocks must be imported from earth in significant quantities, it may be necessary to bring the next-generation launch vehicle (single-stage-to-orbit) into operation by 1991. The scenario presented features use of the mass-driver reaction engine for orbit-to-orbit transfer of cargos and makes extensive use of the expendable Shuttle external propellant tanks.

Charliecloud: Unprivileged containers for user-defined software stacks in HPC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Priedhorsky, Reid; Randles, Timothy C.

Supercomputing centers are seeing increasing demand for user-defined software stacks (UDSS), instead of or in addition to the stack provided by the center. These UDSS support user needs such as complex dependencies or build requirements, externally required configurations, portability, and consistency. The challenge for centers is to provide these services in a usable manner while minimizing the risks: security, support burden, missing functionality, and performance. We present Charliecloud, which uses the Linux user and mount namespaces to run industry-standard Docker containers with no privileged operations or daemons on center resources. Our simple approach avoids most security risks while maintaining accessmore » to the performance and functionality already on offer, doing so in less than 500 lines of code. Charliecloud promises to bring an industry-standard UDSS user workflow to existing, minimally altered HPC resources.« less

Flammability, Odor, Offgassing, and Compatibility Requirements and Test Procedures for Materials in Environments that Support Combustion

NASA Technical Reports Server (NTRS)

1998-01-01

This handbook establishes NASA program requirements for evaluation, testing, and selection of materials to preclude unsafe conditions related to flammability, odor, offgassing, and fluid compatibility. Materials intended for use in space vehicles, specified test facilities, and specified ground support equipment (GSE) must meet the requirements of this document. Additional materials performance requirements may be specified in other program or NASA center specific documentation. Responsible NASA centers materials organizations must include applicable requirements of this document in their materials control programs. Materials used in habitable areas of spacecraft, including the materials of the spacecraft, stowed equipment, and experiments, must be evaluated for flammability, odor, and offgassing characteristics. All materials used in other areas must be evaluated for flammability characteristics. In addition, materials that are exposed to liquid oxygen (LOX), gaseous oxygen (GOX), and other reactive fluids' must be evaluated for compatibility with the fluid in their use application. Materials exposed to pressurized breathing gases also must be evaluated for odor and offgassing characteristics. The worst-case anticipated use environment (most hazardous pressure, temperature, material thickness, and fluid exposure conditions) must be used in the evaluation process. Materials that have been shown to meet the criteria of the required tests are acceptable for further consideration in design. Whenever possible, materials should be selected that have already been shown to meet the test criteria in the use environment. Existing test data are compiled in the NASA Marshall Space Flight Center (MSFC) Materials and Processes Technical Information System (MAPTIS) and published periodically as the latest revision of a joint document with Johnson Space Center (JSC), MSFC-HDBK-527/JSC 09604. MAPTIS can be accessed by computer datalink. Systems containing materials that have not been tested or do not meet the criteria of the required tests must be verified to be acceptable in the use configuration by analysis or testing. This verification rationale must be documented and submitted to the responsible NASA center materials organization for approval.

Refocusing and Evolving Subseasonal-to-Seasonal Services in NOAA's National Weather Service

NASA Astrophysics Data System (ADS)

Timofeyeva-Livezey, M. M.; Horsfall, F. M. C.; Silva, V.; Mangan, M. R.; Meyers, J. C.; Zdrojewski, J.

2017-12-01

NOAA's National Weather Service (NWS) recently completed a reorganization to better support its goal to build a Weather-Ready Nation. As part of the reorganization, NWS streamlined its 11 national service programs, including climate services, to provide a more structured approach to supporting service delivery needs. As the American public increasingly requests information at sub-seasonal and seasonal time scales for decision making, the NWS Climate Services Program is striving to meet those needs by accelerating transition of research to operations, improving delivery of products and services, and enhancing partnerships to facilitate provision of seamless weather, water, and climate products and services at regional and local scales. Additionally, NWS forecasters are requesting more tools to be able to put severe weather and water events into a climate context to provide more effective impact-based decision support services (IDSS). This paper will describe the activities to more effectively integrate climate services into the NWS suite of environmental information, the roles of the NWS offices supporting or delivering sub-seasonal and seasonal information to the US public, and engaging NWS core and deep-core partners in provision of information on climatological risks and preparedness as a part of IDSS. We will discuss the process by which we collect user requests and/or needs and the NWS process that allows us to move these requests and needs through a formal requirements validation process and thus place the requirement on a path to identify a potential solution for implementation. The validation of a NWS climate-related requirement is also key to identify research, development, and transition mission delivery needs that are supported through the Office of Oceanic and Atmospheric Research (OAR) Climate Program Office (CPO). In addition, we will present the outcomes of key actions of the first ever NWS National Climate Services Meeting (NCSM) that was held in May 2016 with the participation of more than 250 NWS climate services staff and key partners from across the country. The key actions include understanding core and deep-core partners, advancing training for NWS staff focused on IDSS, and better organization of service delivery at regional and local levels.

Measuring Cognitive Load in the Presence of Educational Video: Towards a Multimodal Methodology

ERIC Educational Resources Information Center

Kruger, Jan-Louis; Doherty, Stephen

2016-01-01

The use of video has become well established in education, from traditional courses to blended and online courses. It has grown both in its diversity of applications as well as its content. Such educational video however is not fully accessible to all students, particularly those who require additional visual support or students studying in a…

Live-load distribution on glued-laminated timber girder bridges : final report : conclusions and recommendations

Treesearch

Fouad Fanous; Jeremy May; Terry Wipf; Michael Ritter

2011-01-01

Increased use of timber bridges in the U.S. transportation system has required additional research to improve the current design methodology of these bridges. For this reason, the U.S. Forest Service, Forest Products Laboratory (FPL), and the Federal Highway Administration have supported several research programs to attain the objective listed above. This report is a...

Training Health Service Technicians as Teacher Assistants in an Inpatient Residential Emotional/Behavior Disorder Classroom Setting

ERIC Educational Resources Information Center

Banks, Walter E.

2012-01-01

Schools have identified that the use of Teacher Assistants often provides needed additional support in the school setting. In a Health Care Facility that provides inpatient psychiatric services, children ages 5-14 are required to engage in school activities. Currently there are no Teacher Assistants trained in the facility. This study focuses on…

Key Information-Problem Solving Skills to Learn in Secondary Education: A Qualitative, Multi-Case Study

ERIC Educational Resources Information Center

Argelagós, Esther; Pifarré, Manoli

2016-01-01

Internet has become one of the most important information sources for students' personal and academic life. In addition, the World Wide Web is receiving increased attention in education because of its potential to support new forms of learning. However, using the information from the net for learning requires the development of a set of abilities…

Basrah Children’s Hospital, Basrah, Iraq

DTIC Science & Technology

2009-07-28

that 97% of urban and 79% of rural populations had access to health care, which included public health programs for malaria and tuberculosis control...construct the medical logistics warehouses landscaping install kitchen and laundry equipment medical equipment (medical waste autoclave, oxygen...addition, the SOW required the construction of supporting facilities to include the following: cafeteria and associated facilities (i.e. kitchen

78 FR 46999 - Additional Waivers and Alternative Requirements for Hurricane Sandy Grantees in Receipt of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... activities in support of the tourism industry (State of New York only). In the notice published on April 19, 2013, the Department granted the State of New York a waiver to allow the State to fund certain tourism... waiver to allow the State to fund certain tourism activities within counties receiving a Presidential...

Alternative Deployment Duration - Reserve Component (ADD-RC)

DTIC Science & Technology

2003-02-01

Other Personnel Equipment & S 8,375.00 1.50 12,562.50 2.00 16,750.00 Medical Support/Health Services 158.50...VAARNG) CPT Zana , 29th Infantry Division (VAARNG) ADD-RC A-1 CAA-R-01-67 (THIS PAGE INTENTIONALLY... Medical , Signal) as well as on availability of qualified instructors - Current training requirements being fulfilled through an additional cycle of

Mapping habitat suitability for at-risk plants and its implications for restoration and reintroduction

Treesearch

E. Questad; J.R. Kellner; K. Kinney; S. Cordell; G.P. Asner; J. Thaxton; J. Diep; A. Uowolo; S. Brooks; N. Inman-Narahari; S. Evans; B. Tucker

2014-01-01

The conservation of species at risk of extinction requires data to support decisions at landscape to regional scales. There is a need for information that can assist with locating suitable habitats in fragmented and degraded landscapes to aid the reintroduction of at-risk plant species. In addition, desiccation and water stress can be significant barriers to the...

Insights into Inclusive Education through a Small Finnish Case Study of an Inclusive School Context

ERIC Educational Resources Information Center

Tarr, Jane Mary; Tsokova, Diana; Takkunen, Ulla-Maija

2012-01-01

This study seeks to present data and discussion arising from a case study of a school in Finland renowned for its practice in the inclusion of learners with additional support requirements due to cognitive and physical disabilities. It aims to establish how the school staff understand their practice with inclusion through day-to-day professional…

Spanish experience on the design of radon surveys based on the use of geogenic information.

PubMed

Sainz Fernández, C; Quindós Poncela, L S; Fernández Villar, A; Fuente Merino, I; Gutierrez-Villanueva, J L; Celaya González, S; Quindós López, L; Quindós López, J; Fernández, E; Remondo Tejerina, J; Martín Matarranz, J L; García Talavera, M

2017-01-01

One of the requirements of the recently approved EU-BSS (European Basic Safety Standards Directive, EURATOM, 2013) is the design and implementation of national radon action plans in the member states (Annex XVIII). Such plans require radon surveys. The analysis of indoor radon data is supported by the existing knowledge about geogenic radiation. With this aim, we used the terrestrial gamma dose rate data from the MARNA project. In addition, we considered other criterion regarding the surface of Spain, population, permeability of rocks, uranium and radium contain in soils because currently no data are available related to soil radon gas concentration and permeability in Spain. Given that, a Spanish radon map was produced which will be part of the European Indoor Radon Map and a component of the European Atlas of Natural Radiation. The map indicates geographical areas with high probability of finding high indoor radon concentrations. This information will support legislation regarding prevention of radon entry both in dwellings and workplaces. In addition, the map will serve as a tool for the development of strategies at all levels: individual dwellings, local, regional and national administration. Copyright © 2016 Elsevier Ltd. All rights reserved.

Thermodynamic Analyses of the LCLS-II Cryogenic Distribution System

DOE PAGES

Dalesandro, Andrew; Kaluzny, Joshua; Klebaner, Arkadiy

2016-12-29

The Linac Coherent Light Source (LCLS) at Stanford Linear Accelerator Center (SLAC) is in the process of being upgraded to a superconducting radio frequency (SRF) accelerator and renamed LCLS-II. This upgrade requires thirty-five 1.3 GHz SRF cryomodules (CM) and two 3.9 GHz CM. A cryogenic distribution system (CDS) is in development by Fermi National Accelerator Laboratory to interconnect the CM Linac with the cryogenic plant (CP). The CDS design utilizes cryogenic helium to support the CM operations with a high temperature thermal shield around 55 K, a low temperature thermal intercepts around 5 K, and a SRF cavity liquid heliummore » supply and sub-atmospheric vapor return both around 2 K. Additionally the design must accommodate a Linac consisting of two parallel cryogenic strings, supported by two independent CP utilizing CDS components such as distribution boxes, transfer lines, feed caps and endcaps. In this paper, we describe the overall layout of the cryogenic distribution system and the major thermodynamic factors which influence the CDS design including heat loads, pressure drops, temperature profiles, and pressure relieving requirements. In addition the paper describes how the models are created to perform the analyses.« less

System Design Techniques for Reducing the Power Requirements of Advanced life Support Systems

NASA Technical Reports Server (NTRS)

Finn, Cory; Levri, Julie; Pawlowski, Chris; Crawford, Sekou; Luna, Bernadette (Technical Monitor)

2000-01-01

The high power requirement associated with overall operation of regenerative life support systems is a critical Z:p technological challenge. Optimization of individual processors alone will not be sufficient to produce an optimized system. System studies must be used in order to improve the overall efficiency of life support systems. Current research efforts at NASA Ames Research Center are aimed at developing approaches for reducing system power and energy usage in advanced life support systems. System energy integration and energy reuse techniques are being applied to advanced life support, in addition to advanced control methods for efficient distribution of power and thermal resources. An overview of current results of this work will be presented. The development of integrated system designs that reuse waste heat from sources such as crop lighting and solid waste processing systems will reduce overall power and cooling requirements. Using an energy integration technique known as Pinch analysis, system heat exchange designs are being developed that match hot and cold streams according to specific design principles. For various designs, the potential savings for power, heating and cooling are being identified and quantified. The use of state-of-the-art control methods for distribution of resources, such as system cooling water or electrical power, will also reduce overall power and cooling requirements. Control algorithms are being developed which dynamically adjust the use of system resources by the various subsystems and components in order to achieve an overall goal, such as smoothing of power usage and/or heat rejection profiles, while maintaining adequate reserves of food, water, oxygen, and other consumables, and preventing excessive build-up of waste materials. Reductions in the peak loading of the power and thermal systems will lead to lower overall requirements. Computer simulation models are being used to test various control system designs.

A model-driven privacy compliance decision support for medical data sharing in Europe.

PubMed

Boussi Rahmouni, H; Solomonides, T; Casassa Mont, M; Shiu, S; Rahmouni, M

2011-01-01

Clinical practitioners and medical researchers often have to share health data with other colleagues across Europe. Privacy compliance in this context is very important but challenging. Automated privacy guidelines are a practical way of increasing users' awareness of privacy obligations and help eliminating unintentional breaches of privacy. In this paper we present an ontology-plus-rules based approach to privacy decision support for the sharing of patient data across European platforms. We use ontologies to model the required domain and context information about data sharing and privacy requirements. In addition, we use a set of Semantic Web Rule Language rules to reason about legal privacy requirements that are applicable to a specific context of data disclosure. We make the complete set invocable through the use of a semantic web application acting as an interactive privacy guideline system can then invoke the full model in order to provide decision support. When asked, the system will generate privacy reports applicable to a specific case of data disclosure described by the user. Also reports showing guidelines per Member State may be obtained. The advantage of this approach lies in the expressiveness and extensibility of the modelling and inference languages adopted and the ability they confer to reason with complex requirements interpreted from high level regulations. However, the system cannot at this stage fully simulate the role of an ethics committee or review board.

A management information system to study space diets

NASA Technical Reports Server (NTRS)

Kang, Sukwon; Both, A. J.; Janes, H. W. (Principal Investigator)

2002-01-01

A management information system (MIS), including a database management system (DBMS) and a decision support system (DSS), was developed to dynamically analyze the variable nutritional content of foods grown and prepared in an Advanced Life Support System (ALSS) such as required for long-duration space missions. The DBMS was designed around the known nutritional content of a list of candidate crops and their prepared foods. The DSS was designed to determine the composition of the daily crew diet based on crop and nutritional information stored in the DBMS. Each of the selected food items was assumed to be harvested from a yet-to-be designed ALSS biomass production subsystem and further prepared in accompanying food preparation subsystems. The developed DBMS allows for the analysis of the nutrient composition of a sample 20-day diet for future Advanced Life Support missions and is able to determine the required quantities of food needed to satisfy the crew's daily consumption. In addition, based on published crop growth rates, the DBMS was able to calculate the required size of the biomass production area needed to satisfy the daily food requirements for the crew. Results from this study can be used to help design future ALSS for which the integration of various subsystems (e.g., biomass production, food preparation and consumption, and waste processing) is paramount for the success of the mission.

A management information system to study space diets.

PubMed

Kang, Sukwon; Both, A J

2002-01-01

A management information system (MIS), including a database management system (DBMS) and a decision support system (DSS), was developed to dynamically analyze the variable nutritional content of foods grown and prepared in an Advanced Life Support System (ALSS) such as required for long-duration space missions. The DBMS was designed around the known nutritional content of a list of candidate crops and their prepared foods. The DSS was designed to determine the composition of the daily crew diet based on crop and nutritional information stored in the DBMS. Each of the selected food items was assumed to be harvested from a yet-to-be designed ALSS biomass production subsystem and further prepared in accompanying food preparation subsystems. The developed DBMS allows for the analysis of the nutrient composition of a sample 20-day diet for future Advanced Life Support missions and is able to determine the required quantities of food needed to satisfy the crew's daily consumption. In addition, based on published crop growth rates, the DBMS was able to calculate the required size of the biomass production area needed to satisfy the daily food requirements for the crew. Results from this study can be used to help design future ALSS for which the integration of various subsystems (e.g., biomass production, food preparation and consumption, and waste processing) is paramount for the success of the mission.

A systematic review of the nature of support for breast-feeding adolescent mothers.

PubMed

Hall Moran, Victoria; Edwards, Janet; Dykes, Fiona; Downe, Soo

2007-06-01

to review the evidence on the nature of support for breast-feeding adolescent mothers. a systematic review of relevant English-language papers was conducted using an a-priori search strategy. Agreement on final inclusion was reached by consensus across the team. The findings were tabulated and described narratively and thematically. of 209 studies identified, seven fitted the inclusion criteria. The papers included in this review varied in design, quality and focus. Five types of support were identified: emotional, esteem, instrumental, informational and network. The participants in the included studies seemed to find the emotional, esteem and network components of support most helpful. Support from the participants' mothers seemed to be particularly powerful. The provision of continuity of support from an expert individual who is skilled in both lactation support and working with adolescents was also highly valued by breast-feeding adolescents. There was also evidence to suggest that targeted breast-feeding educational programmes, specifically designed for the adolescent learner, may be successful in improving breast-feeding initiation and continuation rates in this population. However, a question still arises about which elements of the complex package on offer were most effective. the studies included in the review are diverse. Although the support provided by known and trusted individuals emerges as important to the adolescents, further research is required on the specific nature of that support and the person best placed to provide it. The acceptability and feasibility of other aspects of support and modes of provision also requires additional exploration. Further qualitative and feasibility studies are therefore warranted in order to inform future randomised-controlled interventions trials.

Supportability of a High-Yield-Stress Slurry in a New Stereolithography-Based Ceramic Fabrication Process

NASA Astrophysics Data System (ADS)

He, Li; Song, Xuan

2018-03-01

In recent years, ceramic fabrication using stereolithography (SLA) has gained in popularity because of its high accuracy and density that can be achieved in the final part of production. One of the key challenges in ceramic SLA is that support structures are required for building overhanging features, whereas removing these support structures without damaging the components is difficult. In this research, a suspension-enclosing projection-stereolithography process is developed to overcome this challenge. This process uses a high-yield-stress ceramic slurry as the feedstock material and exploits the elastic force of the material to support overhanging features without the need for building additional support structures. Ceramic slurries with different solid loadings are studied to identify the rheological properties most suitable for supporting overhanging features. An analytical model of a double doctor-blade module is established to obtain uniform and thin recoating layers from a high-yield-stress slurry. Several test cases highlight the feasibility of using a high-yield-stress slurry to support overhanging features in SLA.

Payload/orbiter contamination control assessment support

NASA Technical Reports Server (NTRS)

Rantanen, R. O.; Ress, E. B.

1975-01-01

The development and use is described of a basic contamination mathematical model of the shuttle orbiter which incorporates specific shuttle orbiter configurations and contamination sources. These configurations and sources were evaluated with respect to known shuttle orbiter operational surface characteristics and specific lines-of-sight which encompass the majority of viewing requirements for shuttle payloads. The results of these evaluations are presented as summary tables for each major source. In addition, contamination minimization studies were conducted and recommendations are made, where applicable, to support the shuttle orbiter design and operational planning for those sources which were identified to present a significant contamination threat.

ELEVATING MECHANISM

DOEpatents

Frederick, H.S.; Kinsella, M.A.

1959-02-24

An elevator is described, which is arranged for movement both in a horizontal and in a vertical direction so that the elevating mechanism may be employed for servicing equipment at separated points in a plant. In accordance with the present invention, the main elevator chassis is suspended from a monorail. The chassis, in turn supports a vertically moveable carriage, a sub- carriage vertically moveable on the carriage, and a turntable carried by the sub- carriage and moveable through an arc of 90 with the equipment attached thereto. In addition, the chassis supports all the means required to elevate or rotate the equipment.

IVOA Credential Delegation Protocol Version 1.0

NASA Astrophysics Data System (ADS)

Plante, Raymond; Graham, Matthew; Rixon, Guy; Taffoni, Giuliano; Plante, Raymond; Graham, Matthew

2010-02-01

The credential delegation protocol allows a client program to delegate a user's credentials to a service such that that service may make requests of other services in the name of that user. The protocol defines a REST service that works alongside other IVO services to enable such a delegation in a secure manner. In addition to defining the specifics of the service protocol, this document describes how a delegation service is registered in an IVOA registry along with the services it supports. The specification also explains how one can determine from a service registration that it requires the use of a supporting delegation service.

An object-oriented, knowledge-based system for cardiovascular rehabilitation--phase II.

PubMed Central

Ryder, R. M.; Inamdar, B.

1995-01-01

The Heart Monitor is an object-oriented, knowledge-based system designed to support the clinical activities of cardiovascular (CV) rehabilitation. The original concept was developed as part of graduate research completed in 1992. This paper describes the second generation system which is being implemented in collaboration with a local heart rehabilitation program. The PC UNIX-based system supports an extensive patient database organized by clinical areas. In addition, a knowledge base is employed to monitor patient status. Rule-based automated reasoning is employed to assess risk factors contraindicative to exercise therapy and to monitor administrative and statutory requirements. PMID:8563285

Zero-gravity atmospheric Cloud Physics Experiment Laboratory; Programmatics report

NASA Technical Reports Server (NTRS)

1974-01-01

The programmatics effort included comprehensive analyses in four major areas: (1) work breakdown structure, (2) schedules, (3) costs, and (4) supporting research and technology. These analyses are discussed in detail in the following sections which identify and define the laboratory project development schedule, cost estimates, funding distributions and supporting research and technology requirements. All programmatics analyses are correlated among themselves and with the technical analyses by means of the work breakdown structure which serves as a common framework for program definition. In addition, the programmatic analyses reflect the results of analyses and plans for reliability, safety, test, and maintenance and refurbishment.

Hospital Based Customization of a Medical Information System

PubMed Central

Rath, Marilyn A.; Ferguson, Julie C.

1983-01-01

A Medical Information System must be current if it is to be a viable adjunct to patient care within a hospital setting. Hospital-based customization provides a means of achieving this timeliness with maximum user satisfaction. It, however, requires a major commitment in personnel time as well as additional software and training expenses. The enhanced control of system modifications and overall flexibility in planning the change process result in enthusiastic support of this approach by many hospitals. The key factors for success include careful selection of local personnel with adequate vendor support, extensive QA control, thorough auditing/validation and direct user involvement.

Energy Efficient Engine: Combustor component performance program

NASA Technical Reports Server (NTRS)

Dubiel, D. J.

1986-01-01

The results of the Combustor Component Performance analysis as developed under the Energy Efficient Engine (EEE) program are presented. This study was conducted to demonstrate the aerothermal and environmental goals established for the EEE program and to identify areas where refinements might be made to meet future combustor requirements. In this study, a full annular combustor test rig was used to establish emission levels and combustor performance for comparison with those indicated by the supporting technology program. In addition, a combustor sector test rig was employed to examine differences in emissions and liner temperatures obtained during the full annular performance and supporting technology tests.

Defining "peerness": Developing peer supports for parents with mental illnesses.

PubMed

Nicholson, Joanne; Valentine, Anne

2018-06-01

This article addresses critical considerations in the development of peer supports for parents with mental illnesses, focusing on the question of what makes a peer a peer in the parent peer specialist domain. The implementation and testing of parent peer supports requires specification of the critical components of the model, including the qualities, characteristics, and unique contributions of the parent peer specialist. Themes emerged in Parent Peer Specialist Project Advisory Group discussions, with members drawing from lived experience, practice expertise, and conversations with experts. In addition to literature review, strategic stakeholder interviews were conducted. Lived experience of mental illness and family life, training, and ongoing support for parent peer specialists, along with key ingredients conveyed by perceived peer-parent similarity, will likely enhance the benefits of peer supports to parents and promote job satisfaction and career advancement for parent peer specialists. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Transforming user needs into functional requirements for an antibiotic clinical decision support system: explicating content analysis for system design.

PubMed

Bright, T J

2013-01-01

Many informatics studies use content analysis to generate functional requirements for system development. Explication of this translational process from qualitative data to functional requirements can strengthen the understanding and scientific rigor when applying content analysis in informatics studies. To describe a user-centered approach transforming emergent themes derived from focus group data into functional requirements for informatics solutions and to illustrate these methods to the development of an antibiotic clinical decision support system (CDS). THE APPROACH CONSISTED OF FIVE STEPS: 1) identify unmet therapeutic planning information needs via Focus Group Study-I, 2) develop a coding framework of therapeutic planning themes to refine the domain scope to antibiotic therapeutic planning, 3) identify functional requirements of an antibiotic CDS system via Focus Group Study-II, 4) discover informatics solutions and functional requirements from coded data, and 5) determine the types of information needed to support the antibiotic CDS system and link with the identified informatics solutions and functional requirements. The coding framework for Focus Group Study-I revealed unmet therapeutic planning needs. Twelve subthemes emerged and were clustered into four themes; analysis indicated a need for an antibiotic CDS intervention. Focus Group Study-II included five types of information needs. Comments from the Barrier/Challenge to information access and Function/Feature themes produced three informatics solutions and 13 functional requirements of an antibiotic CDS system. Comments from the Patient, Institution, and Domain themes generated required data elements for each informatics solution. This study presents one example explicating content analysis of focus group data and the analysis process to functional requirements from narrative data. Illustration of this 5-step method was used to develop an antibiotic CDS system, resolving unmet antibiotic prescribing needs. As a reusable approach, these techniques can be refined and applied to resolve unmet information needs with informatics interventions in additional domains.

Transforming User Needs into Functional Requirements for an Antibiotic Clinical Decision Support System

PubMed Central

Bright, T.J.

2013-01-01

Summary Background Many informatics studies use content analysis to generate functional requirements for system development. Explication of this translational process from qualitative data to functional requirements can strengthen the understanding and scientific rigor when applying content analysis in informatics studies. Objective To describe a user-centered approach transforming emergent themes derived from focus group data into functional requirements for informatics solutions and to illustrate these methods to the development of an antibiotic clinical decision support system (CDS). Methods The approach consisted of five steps: 1) identify unmet therapeutic planning information needs via Focus Group Study-I, 2) develop a coding framework of therapeutic planning themes to refine the domain scope to antibiotic therapeutic planning, 3) identify functional requirements of an antibiotic CDS system via Focus Group Study-II, 4) discover informatics solutions and functional requirements from coded data, and 5) determine the types of information needed to support the antibiotic CDS system and link with the identified informatics solutions and functional requirements. Results The coding framework for Focus Group Study-I revealed unmet therapeutic planning needs. Twelve subthemes emerged and were clustered into four themes; analysis indicated a need for an antibiotic CDS intervention. Focus Group Study-II included five types of information needs. Comments from the Barrier/Challenge to information access and Function/Feature themes produced three informatics solutions and 13 functional requirements of an antibiotic CDS system. Comments from the Patient, Institution, and Domain themes generated required data elements for each informatics solution. Conclusion This study presents one example explicating content analysis of focus group data and the analysis process to functional requirements from narrative data. Illustration of this 5-step method was used to develop an antibiotic CDS system, resolving unmet antibiotic prescribing needs. As a reusable approach, these techniques can be refined and applied to resolve unmet information needs with informatics interventions in additional domains. PMID:24454586

Information Requirements for Supervisory Air Traffic Controllers in Support of a Mid-Term Wake Vortex Departure System

NASA Technical Reports Server (NTRS)

Lohr, Gary W.; Williams, Daniel M.; Trujillo, Anna C.; Johnson, Edward J.; Domino, David A.

2008-01-01

A concept focusing on wind dependent departure operations has been developed the current version of this concept is called the Wake Turbulence Mitigation for Departures (WTMD). This concept takes advantage the fact that cross winds of sufficient velocity blow wakes generated by "heavy" and B757 category aircraft on the downwind runway away from the upwind runway. Supervisory Air Traffic Controllers would be responsible for authorization of the Procedure. An investigation of the information requirements necessary to for Supervisors to approve monitor and terminate the Procedure was conducted. Results clearly indicated that the requisite information is currently available in air traffic control towers and that additional information was not required.

Food Service and Nutrition for the Space Station

NASA Technical Reports Server (NTRS)

Sauer, R. L. (Editor)

1985-01-01

The proceedings of the Workshop on Food Service and Nutrition for the Space Station, held in Houston, Texas, on April 10 and 11, 1984 was given. The workshop was attended by experts in food technology from industry, government, and academia. Following a general definition of unique space flight requirements, oral presentations were made on state of the art food technology with the objective of using this technology to support the space flight requirements. Numerous areas are identified which in the opinion of the conferees, would have space flight application. But additional effort, evaluation, or testing to include Shuttle inflight testing will be required for the technology to be applied to the Space Station.

Cost analysis of oxygen recovery systems

NASA Technical Reports Server (NTRS)

Yakut, M. M.

1973-01-01

Report is made of the cost analysis of four leading oxygen recovery subsystems which include two carbon dioxide reduction subsystems and two water electrolysis subsystems, namely, the solid polymer electrolyte and the circulating KOH electrolyte. The four oxygen recovery systems were quantitatively evaluated. System characteristics, including process flows, performance, and physical characteristics were also analyzed. Additionally, the status of development of each of the systems considered and the required advance technology efforts required to bring conceptual and/or pre-prototype hardware to an operational prototype status were defined. Intimate knowledge of the operations, development status, and capabilities of the systems to meet space mission requirements were found to be essential in establishing the cost estimating relationships for advanced life support systems.

Health Providers’ Perceptions of Clinical Trials: Lessons from Ghana, Kenya and Burkina Faso

PubMed Central

Angwenyi, Vibian; Asante, Kwaku-Poku; Traoré, Abdoulaye; Febir, Lawrence Gyabaa; Tawiah, Charlotte; Kwarteng, Anthony; Ouédraogo, Alphonse; Sirima, Sodiomon Bienvenue; Owusu-Agyei, Seth; Imoukhuede, Egeruan Babatunde; Webster, Jayne; Chandramohan, Daniel; Molyneux, Sassy; Jones, Caroline

2015-01-01

Background Clinical trials conducted in Africa often require substantial investments to support trial centres and public health facilities. Trial resources could potentially generate benefits for routine health service delivery but may have unintended consequences. Strengthening ethical practice requires understanding the potential effects of trial inputs on the perceptions and practices of routine health care providers. This study explores the influence of malaria vaccine trials on health service delivery in Ghana, Kenya and Burkina Faso. Methods We conducted: audits of trial inputs in 10 trial facilities and among 144 health workers; individual interviews with frontline providers (n=99) and health managers (n=14); and group discussions with fieldworkers (n=9 discussions). Descriptive summaries were generated from audit data. Qualitative data were analysed using a framework approach. Results Facilities involved in trials benefited from infrastructure and equipment upgrades, support with essential drugs, access to trial vehicles, and placement of additional qualified trial staff. Qualified trial staff in facilities were often seen as role models by their colleagues; assisting with supportive supervision and reducing facility workload. Some facility staff in place before the trial also received formal training and salary top-ups from the trials. However, differential access to support caused dissatisfaction, and some interviewees expressed concerns about what would happen at the end of the trial once financial and supervisory support was removed. Conclusion Clinical trials function as short-term complex health service delivery interventions in the facilities in which they are based. They have the potential to both benefit facilities, staff and communities through providing the supportive environment required for improvements in routine care, but they can also generate dissatisfaction, relationship challenges and demoralisation among staff. Minimising trial related harm and maximising benefits requires careful planning and engagement of key actors at the outset of trials, throughout the trial and on its’ completion. PMID:25933429

The effect of head nurse behaviors on nurse job satisfaction and performance.

PubMed

Sorrentino, E A; Nalli, B; Schriesheim, C

1992-01-01

Many nursing executives ponder the repeated problems at the unit level and occasionally surmise that effective supervision at that level holds the key to quality patient care. These pragmatic concerns, while commonplace, have yet to be explored empirically. The relationship of head nurse direction and support on subordinate job satisfaction and performance is not clearly understood. This study examines these relationships in the context of three moderating factors--role clarity, job anxiety, and unit size. Additionally, head nurse support is examined as a moderator of relationships between head nurse direction and subordinate satisfaction and job performance. Using a sample of 103 registered nurses in a medium-capacity metropolitan general hospital, the results show some significant correlations between head nurse behavior and job satisfaction and performance, and in moderating the effects of job anxiety, unit size, and support. The study highlights the need for replication in other settings. Additionally, other variables relevant to job satisfaction and performance such as life stressors (death or illness in the family) require investigation. The findings of this study reveal implications for management at the unit level and the importance of understanding subordinate behaviors in the context of head nurse support and direction.

Hope for successful implementation of psychosocial/psychiatric rehabilitation in the forensic mental health setting.

PubMed

Brown, Stephanie A; Lewis, Kent

2015-12-01

To explore staff perceptions of the successes and barriers to implementation of the psychosocial/psychiatric rehabilitation (PSR) model in the forensic mental health setting and identify staff supports needed for greater implementation. A qualitative descriptive design was used and staff focus group data was analyzed using the constant comparative method. All aspects of PSR are being implemented in the forensic setting. Barriers limiting comprehensive implementation include hospital processes and functions, legal components, client clinical presentation, staff attributes and interactions, and lack of resources. To foster greater implementation, employees require support to improve interprofessional interactions and acquire additional resources and education. Strengthening existing successes and addressing barriers identified will foster greater PSR implementation in the forensic setting. Adjusting the physical environment, streamlining documentation, shifting focus from security to rehabilitation goals, and adapting PSR principles to various levels of illness acuity and stages of treatment would enhance PSR implementation. A management focus on improving staff morale, self-care, peer support, team cohesion, and communication would limit burnout and increase successful implementation of PSR. Additional educational opportunities and ongoing training are suggested to support a unified understanding and sustained approach to PSR implementation in the forensic setting. (c) 2015 APA, all rights reserved).

A model-based approach to stabilizing crutch supported paraplegic standing by artificial hip joint stiffness.

PubMed

van der Spek, Jaap H; Veltink, Peter H; Hermens, Hermie J; Koopman, Bart F J M; Boom, Herman B K

2003-12-01

The prerequisites for stable crutch supported standing were analyzed in this paper. For this purpose, a biomechanical model of crutch supported paraplegic stance was developed assuming the patient was standing with extended knees. When using crutches during stance, the crutches will put a position constraint on the shoulder, thus reducing the number of degrees of freedom. Additional hip-joint stiffness was applied to stabilize the hip joint and, therefore, to stabilize stance. The required hip-joint stiffness for changing crutch placement and hip-joint offset angle was studied under static and dynamic conditions. Modeling results indicate that, by using additional hip-joint stiffness, stable crutch supported paraplegic standing can be achieved, both under static as well as dynamic situations. The static equilibrium postures and the stability under perturbations were calculated to be dependent on crutch placement and stiffness applied. However, postures in which the hip joint was in extension (C postures) appeared to the most stable postures. Applying at least 60 N x m/rad hip-joint stiffness gave stable equilibrium postures in all cases. Choosing appropriate hip-joint offset angles, the static equilibrium postures changed to more erect postures, without causing instability or excessive arm forces to occur.

Parametric Analysis of Life Support Systems for Future Space Exploration Missions

NASA Technical Reports Server (NTRS)

Swickrath, Michael J.; Anderson, Molly S.; Bagdigian, Bob M.

2011-01-01

The National Aeronautics and Space Administration is in a process of evaluating future targets for space exploration. In order to maintain the welfare of a crew during future missions, a suite of life support technology is responsible for oxygen and water generation, carbon dioxide control, the removal of trace concentrations of organic contaminants, processing and recovery of water, and the storage and reclamation of solid waste. For each particular life support subsystem, a variety competing technologies either exist or are under aggressive development efforts. Each individual technology has strengths and weaknesses with regard to launch mass, power and cooling requirements, volume of hardware and consumables, and crew time requirements for operation. However, from a system level perspective, the favorability of each life support architecture is better assessed when the sub-system technologies are analyzed in aggregate. In order to evaluate each specific life support system architecture, the measure of equivalent system mass (ESM) was employed to benchmark system favorability. Moreover, the results discussed herein will be from the context of loop-closure with respect to the air, water, and waste sub-systems. Specifically, closure relates to the amount of consumables mass that crosses the boundary of the vehicle over the lifetime of a mission. As will be demonstrated in this manuscript, the optimal level of loop closure is heavily dependent upon mission requirements such as duration and the level of extra-vehicular activity (EVA) performed. Sub-system level trades were also considered as a function of mission duration to assess when increased loop closure is practical. Although many additional factors will likely merit consideration in designing life support systems for future missions, the ESM results described herein provide a context for future architecture design decisions toward a flexible path program.

ASTP experiment support data processing

NASA Technical Reports Server (NTRS)

Osburn, R. K.; Barnett, E. L.; Moore, H. L.; Moore, J. B.; Ball, J. R.

1975-01-01

Activities associated with the generation of ASTP experiment support data in the areas of spacecraft ephemeris and orientation and instrument pointing and field-of-view are documented. It is intended that this document represent a cradle-to-grave chronicle of these activities. To satisfy this intent while facilitating the ready dissemination of information, the document is being published twice. The first publication, scheduled for release prior to ASTP liftoff, includes all preflight phases of the experiment support activity in addition to those appendixes that do not pertain to any mission-specific data. The second publication will provide any required updates to the original documentation and will add all mission-specific data, including documentation of all postflight data processing activities and data archiving information.

The enteral vs parenteral nutrition debate revisited.

PubMed

Thomson, Andrew

2008-01-01

Many trials and several meta-analyses have been devoted to comparing enteral with parenteral nutrition support. In this review, these studies are subjected to critical analysis with particular emphasis on their methodology and clinical relevance. Evidence is produced to suggest that the heterogeneous patient populations of the studies and the rigid approach taken to comparing different nutrition therapies inter alia render their conclusions highly questionable and of very doubtful clinical significance. An alternative approach to nutrition research is suggested in which strategies of nutrition support rather than fixed menus are compared. It is suggested that objective measures of intestinal function be evaluated more fully in patients requiring nonvolitional nutrition support, and these are briefly reviewed. In addition, a more scientific approach to evaluating the physiological effects of nutrition support, including chemical tagging and evaluation of muscle function, is recommended.

'I do the best I can': an in-depth exploration of the aphasia management pathway in the acute hospital setting.

PubMed

Foster, Abby M; Worrall, Linda E; Rose, Miranda L; O'Halloran, Robyn

2016-09-01

While research has begun to explore the management of aphasia across the continuum of care, to date there is little in-depth, context specific knowledge relating to the speech pathology aphasia management pathway. This research aimed to provide an in-depth understanding of the current aphasia management pathway in the acute hospital setting, from the perspective of speech pathologists. Underpinned by a social constructivist paradigm, the researchers implemented an interpretive phenomenological method when conducting in-depth interviews with 14 Australian speech pathologists working in the acute hospital setting. Interview transcripts and interviewer field notes were subjected to a qualitative content analysis. Analysis identified a single guiding construct and five main categories to describe the management of aphasia in the acute hospital setting. The guiding construct, First contact with the profession, informed the entire management pathway. Five additional main categories were identified: Referral processes; Screening and assessment; Therapeutic intervention; Educational and affective counselling; and Advocacy. Findings suggest significant diversity in the pathways of care for people with aphasia and their families in the acute hospital setting. Additional support mechanisms are required in order to support speech pathologists to minimise the evidence-practice gap. Implications for Rehabilitation Significant diversity exists in the current aphasia management pathway for people with acute post-stroke aphasia and their families in the acute hospital setting. Mechanisms that support speech pathologists to minimise the evidence-practice gap, and consequently reduce their sense of professional dissonance, are required.

Antifibrinolytic agents and desmopressin as hemostatic agents in cardiac surgery.

PubMed

Erstad, B L

2001-09-01

To review the use of systemic hemostatic medications for reducing bleeding and transfusion requirements with cardiac surgery. Articles were obtained through computerized searches involving MEDLINE (from 1966 to September 2000). Additionally, several textbooks containing information on the diagnosis and management of bleeding associated with cardiac surgery were reviewed. The bibliographies of retrieved publications and textbooks were reviewed for additional references. Due to the large number of randomized investigations involving systemic hemostatic medications for reducing bleeding associated with cardiac surgery, the article selection process focused on recent randomized controlled trials, metaanalyses and pharmacoeconomic evaluations. The primary outcomes extracted from the literature were blood loss and associated transfusion requirements, although other outcome measures such as mortality were extracted when available. Although the majority of investigations for reducing cardiac bleeding and transfusion requirements have involved aprotinin, evidence from recent meta-analyses and randomized trials indicates that the synthetic antifibrinolytic agents, aminocaproic acid and tranexamic acid, have similar clinical efficacy. Additionally, aminocaproic acid (and to a lesser extent tranexamic acid) is much less costly. More comparative information of hemostatic agents is needed retative to other outcomes (eg., reoperation rates, myocardial infarction, stroke). There is insufficient evidence to recommend the use of desmopressin for reducing bleeding and transfusion requirements in cardiac surgery, although certain subsets of patients may benefit from its use. Of the medications that have been used to reduce bleeding and transfusion requirements with cardiac surgery, the antifibrinolytic agents have the best evidence supporting their use. Aminocaproic acid is the least costly therapy based on medication costs and transfusion requirements.

Tailoring the Acquisition Process in the U.S. Department of Defense

DTIC Science & Technology

2015-01-01

and increase efficiency. In theory , those unique programmatic, technical, political, and economic characteristics should determine the management...need to exist for tailoring to be effective? Our objective was to determine whether this policy area would benefit from additional in-depth research...decision reviews, supportability analysis, and deci - sion levels consistent with all applicable statutory requirements. (DAU, 2012, p. B-223) The

How the Use of the International Classification of Functioning, Disability and Health for Children and Youth Changed the Individualized Education Programs in Portugal

ERIC Educational Resources Information Center

Silveira-Maia, Mónica; Lopes-dos-Santos, Pedro; Sanches-Ferreira, Manuela

2017-01-01

Current Portuguese Public Law No. 3/2008 requires the use of the International Classification of Functioning, Health and Disability for Children and Youth (ICF-CY) as a reference framework to guide assessment and intervention procedures for students with additional support needs. This study explores whether the ICF-CY use fostered multidimensional…

The sensorimotor and social sides of the architecture of speech.

PubMed

Pezzulo, Giovanni; Barca, Laura; D'Ausilio, Alessando

2014-12-01

Speech is a complex skill to master. In addition to sophisticated phono-articulatory abilities, speech acquisition requires neuronal systems configured for vocal learning, with adaptable sensorimotor maps that couple heard speech sounds with motor programs for speech production; imitation and self-imitation mechanisms that can train the sensorimotor maps to reproduce heard speech sounds; and a "pedagogical" learning environment that supports tutor learning.

Workplace Wellness Programs: How Regulatory Flexibility Might Undermine Success

PubMed Central

2014-01-01

The Patient Protection and Affordable Care Act revised the law related to workplace wellness programs, which have become part of the nation’s broader health strategy. Health-contingent programs are required to be reasonably designed. However, the regulatory requirements are lax and might undermine program efficacy in terms of both health gains and financial return. I propose a method for the government to support a best-practices approach by considering an accreditation or certification process. Additionally I discuss the need for program evaluation and the potential for employers to be subject to litigation if programs are not carefully implemented. PMID:25211713

National Aeronautics and Space Administration Manned Spacecraft Center data base requirements study

NASA Technical Reports Server (NTRS)

1971-01-01

A study was conducted to evaluate the types of data that the Manned Spacecraft Center (MSC) should automate in order to make available essential management and technical information to support MSC's various functions and missions. In addition, the software and hardware capabilities to best handle the storage and retrieval of this data were analyzed. Based on the results of this study, recommendations are presented for a unified data base that provides a cost effective solution to MSC's data automation requirements. The recommendations are projected through a time frame that includes the earth orbit space station.

Providing Pressurized Gasses to the International Space Station (ISS): Developing a Composite Overwrapped Pressure Vessel (COPV) for the Safe Transport of Oxygen and Nitrogen

NASA Technical Reports Server (NTRS)

Kezirian, Michael; Cook, Anthony; Dick, Brandon; Phoenix, S. Leigh

2012-01-01

To supply oxygen and nitrogen to the International Space Station, a COPV tank is being developed to meet requirements beyond that which have been flown. In order to "Ship Full' and support compatibility with a range of launch site operations, the vessel was designed for certification to International Standards (ISO) that have a different approach than current NASA certification approaches. These requirements were in addition to existing NASA certification standards had to be met. Initial risk-reduction development tests have been successful. Qualification is in progress.

Orbital Transfer Vehicle (OTV) engine study. Phase A: Extension

NASA Technical Reports Server (NTRS)

Sobin, A. J.

1980-01-01

The current Phase A-Extension of the OTV engine study program aims to provide additional expander and staged combustion cycle data that will lead to design definition of the OTV engine. The proposed program effort seeks to optimize the expander cycle engine concept (consistent with identified OTV engine requirements), investigate the feasibility of kitting the staged combustion cycle engine to provide extended thrust operation, and conduct in-depth analysis of development risk, crew safety, and reliability for both cycles. Additional tasks address the costing of a 10/K thrust expander cycle engine and support of OTV systems study contractors.

Supporting Beacon and Event-Driven Messages in Vehicular Platoons through Token-Based Strategies

PubMed Central

Uhlemann, Elisabeth

2018-01-01

Timely and reliable inter-vehicle communications is a critical requirement to support traffic safety applications, such as vehicle platooning. Furthermore, low-delay communications allow the platoon to react quickly to unexpected events. In this scope, having a predictable and highly effective medium access control (MAC) method is of utmost importance. However, the currently available IEEE 802.11p technology is unable to adequately address these challenges. In this paper, we propose a MAC method especially adapted to platoons, able to transmit beacons within the required time constraints, but with a higher reliability level than IEEE 802.11p, while concurrently enabling efficient dissemination of event-driven messages. The protocol circulates the token within the platoon not in a round-robin fashion, but based on beacon data age, i.e., the time that has passed since the previous collection of status information, thereby automatically offering repeated beacon transmission opportunities for increased reliability. In addition, we propose three different methods for supporting event-driven messages co-existing with beacons. Analysis and simulation results in single and multi-hop scenarios showed that, by providing non-competitive channel access and frequent retransmission opportunities, our protocol can offer beacon delivery within one beacon generation interval while fulfilling the requirements on low-delay dissemination of event-driven messages for traffic safety applications. PMID:29570676

Supporting Beacon and Event-Driven Messages in Vehicular Platoons through Token-Based Strategies.

PubMed

Balador, Ali; Uhlemann, Elisabeth; Calafate, Carlos T; Cano, Juan-Carlos

2018-03-23

Timely and reliable inter-vehicle communications is a critical requirement to support traffic safety applications, such as vehicle platooning. Furthermore, low-delay communications allow the platoon to react quickly to unexpected events. In this scope, having a predictable and highly effective medium access control (MAC) method is of utmost importance. However, the currently available IEEE 802.11p technology is unable to adequately address these challenges. In this paper, we propose a MAC method especially adapted to platoons, able to transmit beacons within the required time constraints, but with a higher reliability level than IEEE 802.11p, while concurrently enabling efficient dissemination of event-driven messages. The protocol circulates the token within the platoon not in a round-robin fashion, but based on beacon data age, i.e., the time that has passed since the previous collection of status information, thereby automatically offering repeated beacon transmission opportunities for increased reliability. In addition, we propose three different methods for supporting event-driven messages co-existing with beacons. Analysis and simulation results in single and multi-hop scenarios showed that, by providing non-competitive channel access and frequent retransmission opportunities, our protocol can offer beacon delivery within one beacon generation interval while fulfilling the requirements on low-delay dissemination of event-driven messages for traffic safety applications.

What do peer support workers do? A job description.

PubMed

Jacobson, Nora; Trojanowski, Lucy; Dewa, Carolyn S

2012-07-19

The extant literature suggests that poorly defined job roles make it difficult for peer support workers to be successful, and hinder their integration into multi-disciplinary workplace teams. This article uses data gathered as part of a participatory evaluation of a peer support program at a psychiatric tertiary care facility to specify the work that peers do. Data were gathered through interviews, focus groups, and activity logs and were analyzed using a modified grounded theory approach. Peers engage in direct work with clients and in indirect work that supports their work with clients. The main types of direct work are advocacy, connecting to resources, experiential sharing, building community, relationship building, group facilitation, skill building/mentoring/goal setting, and socialization/self-esteem building. The main types of indirect work are group planning and development, administration, team communication, supervision/training, receiving support, education/awareness building, and information gathering and verification. In addition, peers also do work aimed at building relationships with staff and work aimed at legitimizing the peer role. Experience, approach, presence, role modeling, collaboration, challenge, and compromise can be seen as the tangible enactments of peers' philosophy of work. Candidates for positions as peer support workers require more than experience with mental health and/or addiction problems. The job description provided in this article may not be appropriate for all settings, but it will contribute to a better understanding of the peer support worker position, the skills required, and the types of expectations that could define successful fulfillment of the role.

Temporal Investment Strategy to Enable JPL Future Space Missions

NASA Technical Reports Server (NTRS)

Lincoln, William P.; Hua, Hook; Weisbin, Charles R.

2006-01-01

The Jet Propulsion Laboratory (JPL) formulates and conducts deep space missions for NASA (the National Aeronautics and Space Administration). The Chief Technologist of JPL has the responsibility for strategic planning of the laboratory's advanced technology program to assure that the required technological capabilities to enable future JPL deep space missions are ready as needed; as such he is responsible for the development of a Strategic Plan. As part of the planning effort, he has supported the development of a structured approach to technology prioritization based upon the work of the START (Strategic Assessment of Risk and Technology) team. A major innovation reported here is the addition of a temporal model that supports scheduling of technology development as a function of time. The JPL Strategic Technology Plan divides the required capabilities into 13 strategic themes. The results reported here represent the analysis of an initial seven.

Recycling of trace elements required for humans in CELSS.

PubMed

Ashida, A

1994-11-01

Recycle of complete nourishment necessary for human should be constructed in CELSS (Controlled Ecological Life Support Systems). Essential elements necessary for human support are categorized as major elements, semi-major elements and trace elements. Recently, trace elements have been identified from considerations of local diseases, food additive problems, pollution problems and adult diseases, consisting of Fe, Zn, Cu, Se, Co, F, Si, Mn, Cr, I, As, Mo, Ni, V, Sn, Li, Br, Cd, Pb, B. A review of the biogeochemical history of the earth's biosphere and the physiological nature of humans and plants explains some of the requirements. A possible route for intake of trace elements is considered that trace elements are dissolved in some chemical form in water, absorbed by plants through their roots and then transfered to human as foods. There may be a possibility that living things absorb some trace elements from atmosphere. Management and recycling of trace elements in CELSS is discussed.

Diagnosis and management of acute encephalitis.

PubMed

Halperin, J J

2017-01-01

Encephalitis is typically viral (approximately half of diagnosed cases) or autoimmune (about a quarter) with the remainder remaining undiagnosable at this time. All require general supportive care but only a minority requires intensive care admission - in these intubation, to protect the airway or to treat status epilepticus with anesthetic drugs, may be needed. In some dysautonomia with wide blood pressure fluctuations is the principal concern. Remarkably, in addition to supportive care, specific treatment options are available for the majority - immune-modulating therapy for those with autoimmune disorders, antiviral therapy for herpes simplex 1 and 2, and varicella-zoster encephalitis. Flavivirus infections (West Nile, Japanese encephalitis, tick-borne encephalitis) remain the most common other identified cause of encephalitis but no specific intervention is available. Overall long-term outcomes are favorable in the majority of patients with encephalitis, a proportion that hopefully will improve with further advances in diagnostic technology and therapeutic interventions. © 2017 Elsevier B.V. All rights reserved.

Recycling of trace elements required for humans in CELSS

NASA Astrophysics Data System (ADS)

Ashida, A.

1994-11-01

Recycle of complete nourishment necessary for human should be constructed in CELSS (Controlled Ecological Life Support Systems). Essential elements necessary for human support are categorized as major elements, semi-major elements and trace elements. Recently, trace elements have been identified from considerations of local diseases, food additive problems, pollution problems and adult diseases, consisting of Fe, Zn, Cu, Se, Co, F, Si, Mn, Cr, I, As, Mo, Ni, V, Sn, Li, Br, Cd, Pb, B. A review of the biogeochemical history of the earth's biosphere and the physiological nature of humans and plants explains some of the requirements. A possible route for intake of trace elements is considered that trace elements are dissolved in some chemical form in water, absorbed by plants through their roots and then transfered to human as foods. There may be a posibility that living things absorb some trace elements from atmosphere. Management and recycling of trace elements in CELSS is discussed.

CCDLAB: A Graphical User Interface FITS Image Data Reducer, Viewer, and Canadian UVIT Data Pipeline

NASA Astrophysics Data System (ADS)

Postma, Joseph E.; Leahy, Denis

2017-11-01

CCDLAB was originally developed as a FITS image data reducer and viewer, and development was then continued to provide ground support for the development of the UVIT detector system provided by the Canadian Space Agency to the Indian Space Research Organization’s ASTROSAT satellite and UVIT telescopes. After the launch of ASTROSAT and during UVIT’s first-light and PV phase starting in 2015 December, necessity required the development of a data pipeline to produce scientific images out of the Level 1 format data produced for UVIT by ISRO. Given the previous development of CCDLAB for UVIT ground support, the author provided a pipeline for the new Level 1 format data to be run through CCDLAB with the additional satellite-dependent reduction operations required to produce scientific data. Features of the pipeline are discussed with focus on the relevant data-reduction challenges intrinsic to UVIT data.

3D Printed, Microgroove Pattern-Driven Generation of Oriented Ligamentous Architectures.

PubMed

Park, Chan Ho; Kim, Kyoung-Hwa; Lee, Yong-Moo; Giannobile, William V; Seol, Yang-Jo

2017-09-08

Specific orientations of regenerated ligaments are crucially required for mechanoresponsive properties and various biomechanical adaptations, which are the key interplay to support mineralized tissues. Although various 2D platforms or 3D printing systems can guide cellular activities or aligned organizations, it remains a challenge to develop ligament-guided, 3D architectures with the angular controllability for parallel, oblique or perpendicular orientations of cells required for biomechanical support of organs. Here, we show the use of scaffold design by additive manufacturing for specific topographies or angulated microgroove patterns to control cell orientations such as parallel (0°), oblique (45°) and perpendicular (90°) angulations. These results demonstrate that ligament cells displayed highly predictable and controllable orientations along microgroove patterns on 3D biopolymeric scaffolds. Our findings demonstrate that 3D printed topographical approaches can regulate spatiotemporal cell organizations that offer strong potential for adaptation to complex tissue defects to regenerate ligament-bone complexes.

Using the Virtual Reality World of Second Life to Promote Patient Engagement

PubMed Central

WEINER, Elizabeth; TRANGENSTEIN, Patricia; MCNEW, Ryan; GORDON, Jeffry

2017-01-01

Patients have typically been passive participants in their own healthcare. However, with a change in philosophy towards outcomes driven care, it has become necessary to make sure that patients mutually set their healthcare goals with their providers Both eHealth and mobile health applications have required patient participation in ways never before valued. The virtual reality world of Second Life offers one eHealth solution that requires computer literate patients to participate via avatars in synchronous healthcare visits and support groups, as well as explore online resources asynchronously. This paper describes the development of a Second Life environment that served as a platform for nurse practitioner driven care supplemented by a patient portal as well as the institutional electronic health record. In addition, the use of Second Life is described as an active exercise to expose students in a Consumer Health course to support groups and resources available to actively engage patients. PMID:27332190

Promoting Health and Safety in San Francisco's Chinatown Restaurants: Findings and Lessons Learned from a Pilot Observational Checklist

PubMed Central

Gaydos, Megan; Bhatia, Rajiv; Morales, Alvaro; Lee, Pam Tau; Liu, Shaw San; Chang, Charlotte; Salvatore, Alicia L.; Krause, Niklas; Minkler, Meredith

2011-01-01

Noncompliance with labor and occupational health and safety laws contributes to economic and health inequities. Environmental health agencies are well positioned to monitor workplace conditions in many industries and support enhanced enforcement by responsible regulatory agencies. In collaboration with university and community partners, the San Francisco Department of Public Health used an observational checklist to assess preventable occupational injury hazards and compliance with employee notification requirements in 106 restaurants in San Francisco's Chinatown. Sixty-five percent of restaurants had not posted required minimum wage, paid sick leave, or workers' compensation notifications; 82% of restaurants lacked fully stocked first-aid kits; 52% lacked antislip mats; 37% lacked adequate ventilation; and 28% lacked adequate lighting. Supported by a larger community-based participatory research process, this pilot project helped to spur additional innovative health department collaborations to promote healthier workplaces. PMID:21836739

Towards the formal specification of the requirements and design of a processor interface unit: HOL listings

NASA Technical Reports Server (NTRS)

Fura, David A.; Windley, Phillip J.; Cohen, Gerald C.

1993-01-01

This technical report contains the HOL listings of the specification of the design and major portions of the requirements for a commercially developed processor interface unit (or PIU). The PIU is an interface chip performing memory interface, bus interface, and additional support services for a commercial microprocessor within a fault-tolerant computer system. This system, the Fault-Tolerant Embedded Processor (FTEP), is targeted towards applications in avionics and space requiring extremely high levels of mission reliability, extended maintenance-free operation, or both. This report contains the actual HOL listings of the PIU specification as it currently exists. Section two of this report contains general-purpose HOL theories that support the PIU specification. These theories include definitions for the hardware components used in the PIU, our implementation of bit words, and our implementation of temporal logic. Section three contains the HOL listings for the PIU design specification. Aside from the PIU internal bus (I-Bus), this specification is complete. Section four contains the HOL listings for a major portion of the PIU requirements specification. Specifically, it contains most of the definition for the PIU behavior associated with memory accesses initiated by the local processor.

Development trends in IR detector coolers

NASA Astrophysics Data System (ADS)

Mai, M.; Rühlich, I.; Wiedmann, Th.; Rosenhagen, C.

2009-05-01

For different IR application specific cooler requirements are needed to achieve best performance on system level. Handheld applications require coolers with highest efficiency and lowest weight. For application with continuous operation, i.e. border surveillance or homeland security, a very high MTTF is mandatory. Space applications additionally require extremely high reliability. In other application like fighter aircraft sufficient cooling capacity even at extreme high reject temperatures has to be provided. Meeting all this requirements within one cooler design is technically not feasible. Therefore, different coolers designs like integral rotary, split rotary or split linear are being employed. The use of flexure bearings supporting the driving mechanism has generated a new sub-group for the linear coolers; also, the coolers may either use a motor with moving magnet or with moving coil. AIM has mainly focussed on long life linear cooler technology and therefore developed a series of moving magnet flexure bearing compressors which meets MTTF's exceeding 20,000h (up to 50,000h with a Pulse-Tube coldfinger). These compressors have a full flexure bearing support on both sides of the driving mechanism. Cooler designs are being compared in regard to characteristic figures as described above.

Complementary Tools to Empower and Sustain Behavior Change: Motivational Interviewing and Mindfulness.

PubMed

Sohl, Stephanie Jean; Birdee, Gurjeet; Elam, Roy

2016-11-01

Improving health behaviors is fundamental to preventing and controlling chronic disease. Healthcare providers who have a patient-centered communication style and appropriate behavioral change tools can empower patients to engage in and sustain healthy behaviors. This review highlights motivational interviewing and mindfulness along with other evidence-based strategies for enhancing patient-centered communication and the behavior change process. Motivational interviewing and mindfulness are especially useful for empowering patients to set self-determined, or autonomous, goals for behavior change. This is important because autonomously motivated behavioral change is more sustainable. Additional strategies such as self-monitoring are discussed as useful for supporting the implementation and maintenance of goals. Thus, there is a need for healthcare providers to develop such tools to empower sustained behavior change. The additional support of a new role, a health coach who specializes in facilitating the process of health-related behavior change, may be required to substantially impact public health.

Complementary Tools to Empower and Sustain Behavior Change: Motivational Interviewing and Mindfulness

PubMed Central

Sohl, Stephanie Jean; Birdee, Gurjeet; Elam, Roy

2015-01-01

Improving health behaviors is fundamental to preventing and controlling chronic disease. Healthcare providers who have a patient-centered communication style and appropriate behavioral change tools can empower patients to engage in and sustain healthy behaviors. This review highlights motivational interviewing and mindfulness along with other evidence-based strategies for enhancing patient-centered communication and the behavior change process. Motivational interviewing and mindfulness are especially useful for empowering patients to set self-determined, or autonomous, goals for behavior change. This is important because autonomously motivated behavioral change is more sustainable. Additional strategies such as self-monitoring are discussed as useful for supporting the implementation and maintenance of goals. Thus, there is a need for healthcare providers to develop such tools to empower sustained behavior change. The additional support of a new role, a health coach who specializes in facilitating the process of health-related behavior change, may be required to substantially impact public health. PMID:28239308

Sustainability Tools Inventory - Initial Gaps Analysis | Science ...

EPA Pesticide Factsheets

This report identifies a suite of tools that address a comprehensive set of community sustainability concerns. The objective is to discover whether "gaps" exist in the tool suite’s analytic capabilities. These tools address activities that significantly influence resource consumption, waste generation, and hazard generation including air pollution and greenhouse gases. In addition, the tools have been evaluated using four screening criteria: relevance to community decision making, tools in an appropriate developmental stage, tools that may be transferrable to situations useful for communities, and tools with requiring skill levels appropriate to communities. This document provides an initial gap analysis in the area of community sustainability decision support tools. It provides a reference to communities for existing decision support tools, and a set of gaps for those wishing to develop additional needed tools to help communities to achieve sustainability. It contributes to SHC 1.61.4

Patients' knowledge and expectations regarding dental implants: assessment by questionnaire.

PubMed

Rustemeyer, J; Bremerich, A

2007-09-01

Today, modern implant dentistry appeals to a wide population, but the decision for and the success of implants depend on the knowledge and expectations of patients. The aim of this study was, with the help of a questionnaire, to evaluate the level of patient knowledge before a professional consultation was performed, and hence to be better prepared in the interests of patient awareness. Fifty-eight percent of 315 patients questioned thought that implants require the same care as natural teeth, 61% expected an additional payment of 2000 Euro or less, 80% held the function of an implant-supported overdenture as very important and 54% attached great importance to the aesthetics. The expectations that patients have for an implant-supported set are high in contrast to their willingness to make additional payments. There are still misconceptions regarding costs, and these must be resolved individually in practice.

What is the value of the routine use of patient-reported outcome measures toward improvement of patient outcomes, processes of care, and health service outcomes in cancer care? A systematic review of controlled trials.

PubMed

Kotronoulas, Grigorios; Kearney, Nora; Maguire, Roma; Harrow, Alison; Di Domenico, David; Croy, Suzanne; MacGillivray, Stephen

2014-05-10

The systematic use of patient-reported outcome measures (PROMs) has been advocated as an effective way to standardize cancer practice. Yet, the question of whether PROMs can lead to actual improvements in the quality of patient care remains under debate. This review examined whether inclusion of PROM in routine clinical practice is associated with improvements in patient outcomes, processes of care, and health service outcomes during active anticancer treatment. A systematic review of five electronic databases (Medline, EMBASE, CINAHL [Cumulative Index to Nursing and Allied Health Literature], PsycINFO, and Psychology and Behavioral Sciences Collection [PBSC]) was conducted from database inception to May 2012 to locate randomized and nonrandomized controlled trials of patients receiving active anticancer treatment or supportive care irrespective of type of cancer. Based on prespecified eligibility criteria, we included 26 articles that reported on 24 unique controlled trials. Wide variability in the design and use of interventions delivered, outcomes evaluated, and cancer- and modality-specific context was apparent. Health service outcomes were only scarcely included as end points. Overall, the number of statistically significant findings were limited and PROMs' intervention effect sizes were predominantly small-to-moderate. The routine use of PROMs increases the frequency of discussion of patient outcomes during consultations. In some studies, PROMs are associated with improved symptom control, increased supportive care measures, and patient satisfaction. Additional effort is required to ensure patient adherence, as well as additional support to clinicians who will respond to patient concerns and issues, with clear system guidelines in place to guide their responses. More research is required to support PROM cost-benefit in terms of patient safety, clinician burden, and health services usage.

Requirements for data integration platforms in biomedical research networks: a reference model

PubMed Central

Knaup, Petra

2015-01-01

Biomedical research networks need to integrate research data among their members and with external partners. To support such data sharing activities, an adequate information technology infrastructure is necessary. To facilitate the establishment of such an infrastructure, we developed a reference model for the requirements. The reference model consists of five reference goals and 15 reference requirements. Using the Unified Modeling Language, the goals and requirements are set into relation to each other. In addition, all goals and requirements are described textually in tables. This reference model can be used by research networks as a basis for a resource efficient acquisition of their project specific requirements. Furthermore, a concrete instance of the reference model is described for a research network on liver cancer. The reference model is transferred into a requirements model of the specific network. Based on this concrete requirements model, a service-oriented information technology architecture is derived and also described in this paper. PMID:25699205

Additive Biomanufacturing: An Advanced Approach for Periodontal Tissue Regeneration.

PubMed

Carter, Sarah-Sophia D; Costa, Pedro F; Vaquette, Cedryck; Ivanovski, Saso; Hutmacher, Dietmar W; Malda, Jos

2017-01-01

Periodontitis is defined as a chronic inflammatory condition, characterized by destruction of the periodontium, composed of hard (i.e. alveolar bone and cementum) and soft tissues (i.e. gingiva and periodontal ligament) surrounding and supporting the teeth. In severe cases, reduced periodontal support can lead to tooth loss, which requires tissue augmentation or procedures that initiate a repair, yet ideally a regenerative response. However, mimicking the three-dimensional complexity and functional integration of the different tissue components via scaffold- and/or matrix-based guided tissue engineering represents a great challenge. Additive biomanufacturing, a manufacturing method in which objects are designed and fabricated in a layer-by-layer manner, has allowed a paradigm shift in the current manufacturing of medical devices and implants. This shift from design-to-manufacture to manufacture-to-design, seen from a translational research point of view, provides the biomedical engineering and periodontology communities a technology with the potential to achieve tissue regeneration instead of repair. In this review, the focus is put on additively biomanufactured scaffolds for periodontal applications. Besides a general overview of the concept of additive biomanufacturing within this field, different developed scaffold designs are described. To conclude, future directions regarding advanced biomaterials and additive biomanufacturing technologies for applications in regenerative periodontology are highlighted.

Spacecraft Conceptual Design Compared to the Apollo Lunar Lander

NASA Technical Reports Server (NTRS)

Young, C.; Bowie, J.; Rust, R.; Lenius, J.; Anderson, M.; Connolly, J.

2011-01-01

Future human exploration of the Moon will require an optimized spacecraft design with each sub-system achieving the required minimum capability and maintaining high reliability. The objective of this study was to trade capability with reliability and minimize mass for the lunar lander spacecraft. The NASA parametric concept for a 3-person vehicle to the lunar surface with a 30% mass margin totaled was considerably heavier than the Apollo 15 Lunar Module "as flown" mass of 16.4 metric tons. The additional mass was attributed to mission requirements and system design choices that were made to meet the realities of modern spaceflight. The parametric tool used to size the current concept, Envision, accounts for primary and secondary mass requirements. For example, adding an astronaut increases the mass requirements for suits, water, food, oxygen, as well as, the increase in volume. The environmental control sub-systems becomes heavier with the increased requirements and more structure was needed to support the additional mass. There was also an increase in propellant usage. For comparison, an "Apollo-like" vehicle was created by removing these additional requirements. Utilizing the Envision parametric mass calculation tool and a quantitative reliability estimation tool designed by Valador Inc., it was determined that with today?s current technology a Lunar Module (LM) with Apollo capability could be built with less mass and similar reliability. The reliability of this new lander was compared to Apollo Lunar Module utilizing the same methodology, adjusting for mission timeline changes as well as component differences. Interestingly, the parametric concept's overall estimated risk for loss of mission (LOM) and loss of crew (LOC) did not significantly improve when compared to Apollo.

An automated process for generating archival data files from MATLAB figures

NASA Astrophysics Data System (ADS)

Wallace, G. M.; Greenwald, M.; Stillerman, J.

2016-10-01

A new directive from the White House Office of Science and Technology Policy requires that all publications supported by federal funding agencies (e.g. Department of Energy Office of Science, National Science Foundation) include machine-readable datasets for figures and tables. An automated script was developed at the PSFC to make this process easier for authors using the MATLAB plotting environment to create figures. All relevant data (x, y, z, errorbars) and metadata (line style, color, symbol shape, labels) are contained within the MATLAB .fig file created when saving a figure. The export_fig script extracts data and metadata from a .fig file and exports it into an HDF5 data file with no additional user input required. Support is included for a number of plot types including 2-D and 3-D line, contour, and surface plots, quiver plots, bar graphs, and histograms. This work supported by US Department of Energy cooperative agreement DE-FC02-99ER54512 using the Alcator C-Mod tokamak, a DOE Office of Science user facility.

Teachers' perceptions of virtual worlds as a medium for social inclusion for adults with intellectual disability.

PubMed

Balandin, Susan; Molka-Danielsen, Judith

2015-01-01

The aim of this research was to explore educators' perceptions of a virtual world Second Life TM as an environment for social interaction and social inclusion for the Norwegian adult students with intellectual disability that they supported. Five educators who supported a total of 10 adult students with intellectual disability in computer classes in community Adult Education Centres participated in individual in-depth interviews. The interviews were transcribed verbatim and analysed using a content analysis. Participants were positive about Second Life although they did not perceive that it offered a successful context for social interaction or inclusion. They identified a number of benefits to using a virtual world and for students participating in virtual world research. Barriers identified included language, literacy, and technology issues along with the complexity of participating independently in a virtual world. Some people with intellectual disability can use virtual worlds but the skills required need additional research. Virtual worlds may provide a stimulating, safe, and exciting context for a range of activities but the level of support required by many people is high and consequently expensive.

Chemical stabilization of subgrade soil for the strategic expeditionary landing field

NASA Astrophysics Data System (ADS)

Conaway, M. H.

1983-06-01

The Strategic Expeditionary Landing Field (SELF) is a military expeditionary-type airfield with an aluminum matted surface that is designed for sustained tactical and cargo airlift operations in an amphibious objective area. Because of the operational traffic parameters such as loads of the various types of aircraft, tire pressures and volume of traffic, a base layer must be constructed over subgrade soil support conditions which may be only marginal. The base layer could be constructed with conventional soil construction techniques (compaction) and yield the required strength. It would be difficult, however, to maintain this strength for the required one-year service life under many climatic conditions due to the degrading effects of water on the support capacity of many soils. Chemical soil stabilization with lime, portland cement and asphalt stabilizing agents could be used to treat the soil. These additives, when properly mixed with certain types of soils, initiate reactions which will increase soil support strength and enhance durability (resistance to the degrading effects of water). Technically, this procedure is quite viable but logistically, it may not be feasible.

Medical capability team: the clinical microsystem for combat healthcare delivery in counterinsurgency operations.

PubMed

Clark, Susz; Van Steenvort, Jon K

2008-01-01

Today's operational environment in the support of counterinsurgency operations requires greater tactical and operational flexibility and diverse medical capabilities. The skills and organizations required for full spectrum medical operations are different from those of the past. Combat healthcare demands agility and the capacity for rapid change in clinical systems and processes to better support the counterinsurgency environment. This article proposes the Army Medical Department (AMEDD) develop and implement the medical capability team (MCT) for combat healthcare delivery. It discusses using the concept of the brigade combat team to develop medical capability teams as the unit of effectiveness to transform frontline care; provides a theoretical overview of the MCT as a "clinical microsystem"; discusses MCT leadership, training, and organizational support, and the deployment and employment of the MCT in a counterinsurgency environment. Additionally, this article proposes that the AMEDD initiate the development of an AMEDD Combat Training Center of Excellence to train and validate the MCTs. The complexity of combat healthcare demands an agile and campaign quality AMEDD with joint expeditionary capability in order to promote the best patient outcomes in a counterinsurgency environment.

Facilitation of learning: part 2.

PubMed

Warburton, Tyler; Houghton, Trish; Barry, Debbie

2016-04-27

The previous article in this series of 11, Facilitation of learning: part 1, reviewed learning theories and how they relate to clinical practice. Developing an understanding of these theories is essential for mentors and practice teachers to enable them to deliver evidence-based learning support. This is important given that effective learning support is dependent on an educator who possesses knowledge of their specialist area as well as the relevent tools and methods to support learning. The second domain of the Nursing and Midwifery Council's Standards to Support Learning and Assessment in Practice relates to the facilitation of learning. To fulfil this domain, mentors and practice teachers are required to demonstrate their ability to recognise the needs of learners and provide appropriate support to meet those needs. This article expands on some of the discussions from part 1 of this article and considers these from a practical perspective, in addition to introducing some of the tools that can be used to support learning.

Hydrophysical Evaluation of Wells TW-B, TW-7, UE-6d, U-2gg PSE 3A, U-10L 1, and UE-6e in Yucca Flat

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pohlmann, Karl; Healey, John; Lyles, Bred

This study evaluated six wells in Yucca Flat in support of the Underground Test Area (UGTA) Activity conducted by the U.S. Department of Energy (DOE) at the Nevada National Security Site (NNSS). Accessibility and groundwater sampling conditions were assessed and if conditions permitted, samples were collected for tritium analysis. Four of the wells, TW-B, UE-6d, UE-6e, and TW-7 were sampled in support of UGTA responses to recommendations made by the Yucca Flat/Climax Mine External Peer Review Committee (Navarro, 2016). In addition to its role in support of these responses, TW-7 was included because it is listed in the NNSS Integratedmore » Groundwater Sampling Plan (DOE, 2014) as a required sampling location, although it had not been sampled since 1994. U-2gg PSE 3A and U-10L 1 were evaluated to determine whether deteriorating well conditions can be addressed so that these wells can be used as additional sampling points in Yucca Flat.« less

Current Perspectives on Profiling and Enhancing Wheelchair Court Sport Performance.

PubMed

Paulson, Thomas; Goosey-Tolfrey, Victoria

2017-03-01

Despite the growing interest in Paralympic sport, the evidence base for supporting elite wheelchair sport performance remains in its infancy when compared with able-bodied (AB) sport. Subsequently, current practice is often based on theory adapted from AB guidelines, with a heavy reliance on anecdotal evidence and practitioner experience. Many principles in training prescription and performance monitoring with wheelchair athletes are directly transferable from AB practice, including the periodization and tapering of athlete loads around competition, yet considerations for the physiological consequences of an athlete's impairment and the interface between athlete and equipment are vital when targeting interventions to optimize in-competition performance. Researchers and practitioners are faced with the challenge of identifying and implementing reliable protocols that detect small but meaningful changes in impairment-specific physical capacities and on-court performance. Technologies to profile both linear and rotational on-court performance are an essential component of sport-science support to understand sport-specific movement profiles and prescribe training intensities. In addition, an individualized approach to the prescription of athlete training and optimization of the "wheelchair-user interface" is required, accounting for an athlete's anthropometrics, sports classification, and positional role on court. In addition to enhancing physical capacities, interventions must focus on the integration of the athlete and his or her equipment, as well as techniques for limiting environmental influence on performance. Taken together, the optimization of wheelchair sport performance requires a multidisciplinary approach based on the individual requirements of each athlete.

A numerical and experimental study on optimal design of multi-DOF viscoelastic supports for passive vibration control in rotating machinery

NASA Astrophysics Data System (ADS)

Ribeiro, Eduardo Afonso; Lopes, Eduardo Márcio de Oliveira; Bavastri, Carlos Alberto

2017-12-01

Viscoelastic materials have played an important role in passive vibration control. Nevertheless, the use of such materials in supports of rotating machines, aiming at controlling vibration, is more recent, mainly when these supports present additional complexities like multiple degrees of freedom and require accurate models to predict the dynamic behavior of viscoelastic materials working in a broad band of frequencies and temperatures. Previously, the authors propose a methodology for an optimal design of viscoelastic supports (VES) for vibration suppression in rotordynamics, which improves the dynamic prediction accuracy, the speed calculation, and the modeling of VES as complex structures. However, a comprehensive numerical study of the dynamics of rotor-VES systems, regarding the types and combinations of translational and rotational degrees of freedom (DOFs), accompanied by the corresponding experimental validation, is still lacking. This paper presents such a study considering different types and combinations of DOFs in addition to the simulation of their number of additional masses/inertias, as well as the kind and association of the applied viscoelastic materials (VEMs). The results - regarding unbalance frequency response, transmissibility and displacement due to static loads - lead to: 1) considering VES as complex structures which allow improving the efficacy in passive vibration control; 2) acknowledging the best configuration concerning DOFs and VEM choice and association for a practical application concerning passive vibration control and load resistance. The specific outcomes of the conducted experimental validation attest the accuracy of the proposed methodology.

The European ALMA Regional Centre: a model of user support

NASA Astrophysics Data System (ADS)

Andreani, P.; Stoehr, F.; Zwaan, M.; Hatziminaoglou, E.; Biggs, A.; Diaz-Trigo, M.; Humphreys, E.; Petry, D.; Randall, S.; Stanke, T.; van Kampen, E.; Bárta, M.; Brand, J.; Gueth, F.; Hogerheijde, M.; Bertoldi, F.; Muxlow, T.; Richards, A.; Vlemmings, W.

2014-08-01

The ALMA Regional Centres (ARCs) form the interface between the ALMA observatory and the user community from the proposal preparation stage to the delivery of data and their subsequent analysis. The ARCs provide critical services to both the ALMA operations in Chile and to the user community. These services were split by the ALMA project into core and additional services. The core services are financed by the ALMA operations budget and are critical to the successful operation of ALMA. They are contractual obligations and must be delivered to the ALMA project. The additional services are not funded by the ALMA project and are not contractual obligations, but are critical to achieve ALMA full scientific potential. A distributed network of ARC nodes (with ESO being the central ARC) has been set up throughout Europe at the following seven locations: Bologna, Bonn-Cologne, Grenoble, Leiden, Manchester, Ondrejov, Onsala. These ARC nodes are working together with the central node at ESO and provide both core and additional services to the ALMA user community. This paper presents the European ARC, and how it operates in Europe to support the ALMA community. This model, although complex in nature, is turning into a very successful one, providing a service to the scientific community that has been so far highly appreciated. The ARC could become a reference support model in an age where very large collaborations are required to build large facilities, and support is needed for geographically and culturally diverse communities.

Electrochemical Technology for Oxygen Removal and Measurement in the CELSS Test Facility, Engineering Development Unit

NASA Technical Reports Server (NTRS)

Drews, Michael E.; Covington, Al (Technical Monitor)

1994-01-01

The Life Support Flight Program is evaluating regenerative technologies, including those that utilize higher plants, as a means to reduce resupply over long duration space missions. Constructed to assist in the evaluation process is the CELSS Test Facility Engineering Development Unit (CTF-EDU) an environmentally closed (less than 1% mass and thermal leakage) technology test bed. This ground based fully functional prototype is currently configured to support crop growth, utilizing the power, volume and mass resources allocated for two space station racks. Sub-system technologies were selected considering their impact on available resources, their ability to minimize integration issues, and their degree of modularity. Gas specific mass handling is a key sub-system technology for both biological and physical/chemical life support technologies. The CTF-EDU requires such a system to accommodate non-linear oxygen production from crops, by enabling the control system to change and sustain partial pressure set points in the growth volume. Electrochemical cells are one of the technologies that were examined for oxygen handling in the CTF-EDU. They have been additionally considered to meet other regenerative life support functions, such as oxygen generation, the production of potable water from composite waste streams, and for having the potential to integrate life support functions with those of propulsion and energy storage. An oxygen removal system based on an electrochemical cell was chosen for the EDU due to it's low power, volume and mass requirements (10W, 0.000027 cu m, 4.5 kg) and because of the minimal number of integration considerations. Unlike it's competitors, the system doesn't require post treatments of its byproducts, or heat and power intensive regenerations, that also mandate system redundancy or cycling. The EDUs oxygen removal system only requires two resources, which are already essential to controlled plant growth: electricity and water. Additionally, the amount of oxygen that is removed from the EDU is directly proportional to the cell input current via Faraday's constant, potentially allowing for a mol/electron measurement of photosynthetic rate. The currently operative oxygen removal system has maintained reduced oxygen set points within the EDU, and preparation is underway to verify of the accuracy of electrochemical measurement of oxygen production and hence, photosynthesis. This paper examines the working principles of the electrochemical cell, outlines the overall design of the oxygen removal system and its integration with other EDU subsystems, and summarizes test results obtained over crop growth cycles in the CTF-EDU.

Support for smoking cessation interventions in physician organizations: results from a national study.

PubMed

McMenamin, Sara B; Schauffler, Helen Halpin; Shortell, Stephen M; Rundall, Thomas G; Gillies, Robin R

2003-12-01

To document the extent to which physician organizations, defined as medical groups and independent practice associations, are providing support for smoking cessation interventions and to identify external incentives and organizational characteristics associated with this support. This research uses data from the National Study of Physician Organizations and the Management of Chronic Illness, conducted by the University of California at Berkeley, to document the extent to which physician organizations provide support for smoking cessation interventions. Of 1587 physician organizations nationally with 20 or more physicians, 1104 participated, for a response rate of 70%. Overall, 70% of physician organizations offered some support for smoking cessation interventions. Specifically, 17% require physicians to provide interventions, 15% evaluate interventions, 39% of physician organizations offer smoking health promotion programs, 25% provide nicotine replacement therapy starter kits, and materials are provided on pharmacotherapy (39%), counseling (37%), and self-help (58%). Factors positively associated with organizational support include income or public recognition for quality measures, financial incentives to promote smoking cessation interventions, requirements to report HEDIS (Health Plan Employer Data and Information Set) scores, awareness of the 1996 Clinical Practice Guideline on Smoking Cessation, being a medical group, organizational size, percentage of primary care physicians, and hospital/HMO ownership of the organization. Physician organizations are providing support for smoking cessation interventions, yet the level of support might be improved with more extensive use of external incentives. Financial incentives targeted specifically at promoting smoking cessation interventions need to be explored further. Additionally, emphasis on quality measures should continue, including an expansion of HEDIS smoking cessation measures.

Ultra Reliable Closed Loop Life Support for Long Space Missions

NASA Technical Reports Server (NTRS)

Jones, Harry W.; Ewert, Michael K.

2010-01-01

Spacecraft human life support systems can achieve ultra reliability by providing sufficient spares to replace all failed components. The additional mass of spares for ultra reliability is approximately equal to the original system mass, provided that the original system reliability is not too low. Acceptable reliability can be achieved for the Space Shuttle and Space Station by preventive maintenance and by replacing failed units. However, on-demand maintenance and repair requires a logistics supply chain in place to provide the needed spares. In contrast, a Mars or other long space mission must take along all the needed spares, since resupply is not possible. Long missions must achieve ultra reliability, a very low failure rate per hour, since they will take years rather than weeks and cannot be cut short if a failure occurs. Also, distant missions have a much higher mass launch cost per kilogram than near-Earth missions. Achieving ultra reliable spacecraft life support systems with acceptable mass will require a well-planned and extensive development effort. Analysis must determine the reliability requirement and allocate it to subsystems and components. Ultra reliability requires reducing the intrinsic failure causes, providing spares to replace failed components and having "graceful" failure modes. Technologies, components, and materials must be selected and designed for high reliability. Long duration testing is needed to confirm very low failure rates. Systems design should segregate the failure causes in the smallest, most easily replaceable parts. The system must be designed, developed, integrated, and tested with system reliability in mind. Maintenance and reparability of failed units must not add to the probability of failure. The overall system must be tested sufficiently to identify any design errors. A program to develop ultra reliable space life support systems with acceptable mass should start soon since it must be a long term effort.

Evaluation of solar sludge drying alternatives by costs and area requirements.

PubMed

Kurt, Mayıs; Aksoy, Ayşegül; Sanin, F Dilek

2015-10-01

Thermal drying is a common method to reach above 90% dry solids content (DS) in sludge. However, thermal drying requires high amount of energy and can be expensive. A greenhouse solar dryer (GSD) can be a cost-effective substitute if the drying performance, which is typically 70% DS, can be increased by additional heat. In this study feasibility of GSD supported with solar panels is evaluated as an alternative to thermal dryers to reach 90% DS. Evaluations are based on capital and O&M costs as well as area requirements for 37 wastewater treatment plants (WWTPs) with various sludge production rates. Costs for the supported GSD system are compared to that of conventional and co-generation thermal dryers. To calculate the optimal costs associated with the drying system, an optimization model was developed in which area limitation was a constraint. Results showed that total cost was minimum when the DS in the GSD (DS(m,i)) was equal to the maximum attainable value (70% DS). On average, 58% of the total cost and 38% of total required area were associated with the GSD. Variations in costs for 37 WWTPs were due to differences in initial DS (DS(i,i)) and sludge production rates, indicating the importance of dewatering to lower drying costs. For large plants, GSD supported with solar panels provided savings in total costs especially in long term when compared to conventional and co-generation thermal dryers. Copyright © 2015 Elsevier Ltd. All rights reserved.

Safety policy and requirements for payloads using the Space Transportation System (STS)

NASA Technical Reports Server (NTRS)

1982-01-01

The Space Transportation Operations (STO) safety policy is to minimize STO involvement in the payload and its GSE (ground support equipment) design process while maintaining the assurance of a safe operation. Requirements for assuring payload mission success are the responsibility of the payload organization and are beyond the scope of this document. The intent is to provide the overall safety policies and requirements while allowing for negotiation between the payload organization and the STO operator in the method of implementation of payload safety. This revision provides for a relaxation in the monitoring requirements for inhibits, allows the payload organization to pursue design options and reflects, additionally, some new requirements. As of the issue date of this NHB, payloads which have completed the formal safety assessment reviews of their preliminary design on the basis of the May 1979 issue will be reassessed for compliance with the above changes.

An overview of NASA testing requirements for alternate cleaning solvents used in liquid and gaseous oxygen environments

NASA Technical Reports Server (NTRS)

Strickland, John W.; Davis, S. Eddie

1995-01-01

The elimination of CFC-containing cleaning solvents for oxygen systems has prompted the development of a number of alternative cleaning solvents that must now be evaluated not only for cleanability, but compatibility as well. NASA Handbook 8060.1(NHB 8060.1) establishes the requirements for evaluation, testing, and selection of materials for use in oxygen rich environments. Materials intended for use in space vehicles, specified test facilities, and ground support equipment must meet the requirements of this document. In addition to the requirements of NHB 8060.1 for oxygen service, alternative cleaning solvents must also be evaluated in other areas (such as corrosivity, non-metals compatibility, non-volatile residue contamination, etc.). This paper will discuss the testing requirements of NHB 8060.1 and present preliminary results from early screening tests performed at Marshall Space Flight Center's Materials Combustion Research Facility.

Self-Rupturing Hermetic Valve

NASA Technical Reports Server (NTRS)

Tucker, Curtis E., Jr.; Sherrit, Stewart

2011-01-01

For commercial, military, and aerospace applications, low-cost, small, reliable, and lightweight gas and liquid hermetically sealed valves with post initiation on/off capability are highly desirable for pressurized systems. Applications include remote fire suppression, single-use system-pressurization systems, spacecraft propellant systems, and in situ instruments. Current pyrotechnic- activated rupture disk hermetic valves were designed for physically larger systems and are heavy and integrate poorly with portable equipment, aircraft, and small spacecraft and instrument systems. Additionally, current pyrotechnically activated systems impart high g-force shock loads to surrounding components and structures, which increase the risk of damage and can require additional mitigation. The disclosed mechanism addresses the need for producing a hermetically sealed micro-isolation valve for low and high pressure for commercial, aerospace, and spacecraft applications. High-precision electrical discharge machining (EDM) parts allow for the machining of mated parts with gaps less than a thousandth of an inch. These high-precision parts are used to support against pressure and extrusion, a thin hermetically welded diaphragm. This diaphragm ruptures from a pressure differential when the support is removed and/or when the plunger is forced against the diaphragm. With the addition of conventional seals to the plunger and a two-way actuator, a derivative of this design would allow nonhermetic use as an on/off or metering valve after the initial rupturing of the hermetic sealing disk. In addition, in a single-use hermetically sealed isolation valve, the valve can be activated without the use of potential leak-inducing valve body penetrations. One implementation of this technology is a high-pressure, high-flow-rate rupture valve that is self-rupturing, which is advantageous for high-pressure applications such as gas isolation valves. Once initiated, this technology is self-energizing and requires low force compared to current pyrotechnic-based burst disk hermetic valves. This is a novel design for producing a single-use, self-rupturing, hermetically sealed valve for isolation of pressurized gas and/or liquids. This design can also be applied for single-use disposable valves for chemical instruments. A welded foil diaphragm is fully supported by two mated surfaces that are machined to micron accuracies using EDM. To open the valve, one of the surfaces is moved relative to the other to (a) remove the support creating an unsupported diaphragm that ruptures due to over pressure, and/or (b) produce tension in the diaphragm and rupture it.

Combustion process science and technology

NASA Technical Reports Server (NTRS)

Hale, Robert R.

1989-01-01

An important and substantial area of technical work in which noncontact temperature measurement (NCTM) is desired is that involving combustion process research. In the planning for this workshop, it was hoped that W. Serignano would provide a briefing regarding the experimental requirements for thermal measurements to support such research. The particular features of thermal measurement requirements included those describing the timeline for combustion experiments, the requirements for thermal control and diagnostics of temperature and other related thermal measurements and the criticality to the involved science to parametric features of measurement capability including precision, repeatability, stability, and resolution. In addition, it was hoped that definitions could be provided which characterize the needs for concurrent imaging as it relates to science observations during the conduct of experimentation.

Factors which Limit the Value of Additional Redundancy in Human Rated Launch Vehicle Systems

NASA Technical Reports Server (NTRS)

Anderson, Joel M.; Stott, James E.; Ring, Robert W.; Hatfield, Spencer; Kaltz, Gregory M.

2008-01-01

The National Aeronautics and Space Administration (NASA) has embarked on an ambitious program to return humans to the moon and beyond. As NASA moves forward in the development and design of new launch vehicles for future space exploration, it must fully consider the implications that rule-based requirements of redundancy or fault tolerance have on system reliability/risk. These considerations include common cause failure, increased system complexity, combined serial and parallel configurations, and the impact of design features implemented to control premature activation. These factors and others must be considered in trade studies to support design decisions that balance safety, reliability, performance and system complexity to achieve a relatively simple, operable system that provides the safest and most reliable system within the specified performance requirements. This paper describes conditions under which additional functional redundancy can impede improved system reliability. Examples from current NASA programs including the Ares I Upper Stage will be shown.

Assessment of Nutrition Education Among Pediatric Gastroenterologists: A Survey of NASPGHAN Members

PubMed Central

Lin, Henry C; Kahana, Doron; Vos, Miriam B; Black, Dennis; Port, Zack; Shulman, Robert; Scheimann, Ann; Mascarenhas, Maria R.

2012-01-01

Pediatric gastroenterology is the only pediatric subspecialty with nutrition as part of its official curriculum and objective. However, pediatric gastroenterology fellows feel that their baseline knowledge in nutrition is suboptimal. The purpose of this study was to assess the perceived effectiveness of nutrition training among pediatric gastroenterologists, identify areas of need for additional education, and determine the perceived role of the gastroenterologist in obesity management. Methods A survey was sent to members and fellows of the North American Society of Pediatric Gastroenterology, Hepatology and Nutrition (NASPGHAN) to assess general nutrition education as well as obesity management and educational needs. Results A total of 272 responses were received, for an overall response rate of 15.2% (272/1,784). Most responders reported having average or above-average knowledge base in all nutritional topics. There was strong interest in additional resources and a continuing medical education (CME) module on several nutrition topics including: nutritional requirements in specific gastrointestinal (GI) disease, failure to thrive/growth failure, and parenteral nutrition support, with the format of CME dependent on the topic. There was also a strong interest in additional CME on the management of pediatric obesity (67%), as most responders felt that the management of obesity in children requires subspecialty care. However, the perceived role of the pediatric gastroenterologist was one of support to treat the gastrointestinal and hepatic co-morbidities of obesity rather than serve as the main provider of comprehensive obesity care. Conclusion Pediatric gastroenterologists identified gaps in their nutrition knowledge base that may be attributed to the current nutrition education training during fellowship. Multiple topics were identified for additional nutrition education, including obesity management. The nutrition management challenges of today necessitate improved baseline nutrition knowledge and this focus on nutrition should begin at the fellowship level. PMID:22699840

Assessment of nutrition education among pediatric gastroenterologists: a survey of NASPGHAN members.

PubMed

Lin, Henry C; Kahana, Doron; Vos, Miriam B; Black, Dennis; Port, Zack; Shulman, Robert; Scheimann, Ann; Mascarenhas, Maria R

2013-02-01

Pediatric gastroenterology is the only pediatric subspecialty with nutrition as part of its official curriculum and objective; however, pediatric gastroenterology fellows believe that their baseline knowledge in nutrition is suboptimal. The purpose of the present study was to assess the perceived effectiveness of nutrition training among pediatric gastroenterologists, identify areas of need for additional education, and determine the perceived role of the gastroenterologist in obesity management. A survey was sent to members and fellows of the North American Society of Pediatric Gastroenterology, Hepatology and Nutrition to assess general nutrition education as well as obesity management and educational needs. A total of 272 responses were received, for an overall response rate of 15.2% (272/1784). Most responders reported having average or above-average knowledge base in all nutritional topics. There was strong interest in additional resources and a continuing medical education (CME) module on several nutrition topics including nutritional requirements in specific gastrointestinal (GI) disease, failure to thrive/growth failure, and parenteral nutrition support, with the format of CME dependent on the topic. There was also a strong interest in additional CME on the management of pediatric obesity (67%), as most responders believed that the management of obesity in children requires subspecialty care. The perceived role of the pediatric gastroenterologist was, however, one of support to treat the GI and hepatic comorbidities of obesity rather than serve as the main provider of comprehensive obesity care. Pediatric gastroenterologists identified gaps in their nutrition knowledge base that may be attributed to the present nutrition education training during fellowship. Multiple topics were identified for additional nutrition education, including obesity management. The nutrition management challenges of today necessitate improved baseline nutrition knowledge and this focus on nutrition should begin at the fellowship level.

Realities and Challenges of Support for Children with Special Needs in Nursery Schools

PubMed Central

Ishiguro, Kaori; Yoshioka, Shin-ichi

2016-01-01

Background Nursery schools and kindergartens have been struggling to cope with increasing numbers of children with special needs. Hence, we conducted a study on what nursery school teachers (NSTs) will require regarding learning and societal resources for supporting such children in the future. Methods A questionnaire survey was conducted for 2,476 NSTs employed in 154 nursery schools in Shimane and Kochi Prefectures. The questionnaires were sent by post to officials at each nursery school. The completed questionnaires were collected by the school officials and returned by post. In addition to statistical processing of the survey results, the content of the free description responses was analyzed using the KJ method. Results Responses were obtained from 1,509 NSTs at 118 nursery schools. Of the respondents, 90.7% had experienced difficulties coping with children with special needs, and 83.9% were in charge of caring for such children. Such children were enrolled in every childcare facility participating in the survey. The NSTs primarily needed to learn about specific coping methods, the illness, and skills for supporting parents; concerning the societal resources, they needed the addition of assistant NSTs, the implementation of age-five check-up, and the recruitment of mentors. The free description responses were categorized into the following five categories: demand for child care administration, cooperation with professional staff, support for parents, developmental health checkups, and on-site needs for nursery childcare. One of the specific demands was to develop human resources capable of providing parents with appropriate advice. Conclusion The results have shown that all NSTs are required to deal with children with special needs. Future challenges for providing support for such children are: ⅰ) to raise awareness of such children; ⅱ) to eliminate regional disparities; ⅲ) to provide professional training for NSTs specializing in developmental disorders; ⅳ) to train and re-educate assistant NSTs and ⅴ) to enhance infant screening. PMID:27046948

Realities and Challenges of Support for Children with Special Needs in Nursery Schools.

PubMed

Ishiguro, Kaori; Yoshioka, Shin-Ichi

2016-03-01

Nursery schools and kindergartens have been struggling to cope with increasing numbers of children with special needs. Hence, we conducted a study on what nursery school teachers (NSTs) will require regarding learning and societal resources for supporting such children in the future. A questionnaire survey was conducted for 2,476 NSTs employed in 154 nursery schools in Shimane and Kochi Prefectures. The questionnaires were sent by post to officials at each nursery school. The completed questionnaires were collected by the school officials and returned by post. In addition to statistical processing of the survey results, the content of the free description responses was analyzed using the KJ method. Responses were obtained from 1,509 NSTs at 118 nursery schools. Of the respondents, 90.7% had experienced difficulties coping with children with special needs, and 83.9% were in charge of caring for such children. Such children were enrolled in every childcare facility participating in the survey. The NSTs primarily needed to learn about specific coping methods, the illness, and skills for supporting parents; concerning the societal resources, they needed the addition of assistant NSTs, the implementation of age-five check-up, and the recruitment of mentors. The free description responses were categorized into the following five categories: demand for child care administration, cooperation with professional staff, support for parents, developmental health checkups, and on-site needs for nursery childcare. One of the specific demands was to develop human resources capable of providing parents with appropriate advice. The results have shown that all NSTs are required to deal with children with special needs. Future challenges for providing support for such children are: ⅰ) to raise awareness of such children; ⅱ) to eliminate regional disparities; ⅲ) to provide professional training for NSTs specializing in developmental disorders; ⅳ) to train and re-educate assistant NSTs and ⅴ) to enhance infant screening.

A remark on copy number variation detection methods.

PubMed

Li, Shuo; Dou, Xialiang; Gao, Ruiqi; Ge, Xinzhou; Qian, Minping; Wan, Lin

2018-01-01

Copy number variations (CNVs) are gain and loss of DNA sequence of a genome. High throughput platforms such as microarrays and next generation sequencing technologies (NGS) have been applied for genome wide copy number losses. Although progress has been made in both approaches, the accuracy and consistency of CNV calling from the two platforms remain in dispute. In this study, we perform a deep analysis on copy number losses on 254 human DNA samples, which have both SNP microarray data and NGS data publicly available from Hapmap Project and 1000 Genomes Project respectively. We show that the copy number losses reported from Hapmap Project and 1000 Genome Project only have < 30% overlap, while these reports are required to have cross-platform (e.g. PCR, microarray and high-throughput sequencing) experimental supporting by their corresponding projects, even though state-of-art calling methods were employed. On the other hand, copy number losses are found directly from HapMap microarray data by an accurate algorithm, i.e. CNVhac, almost all of which have lower read mapping depth in NGS data; furthermore, 88% of which can be supported by the sequences with breakpoint in NGS data. Our results suggest the ability of microarray calling CNVs and the possible introduction of false negatives from the unessential requirement of the additional cross-platform supporting. The inconsistency of CNV reports from Hapmap Project and 1000 Genomes Project might result from the inadequate information containing in microarray data, the inconsistent detection criteria, or the filtration effect of cross-platform supporting. The statistical test on CNVs called from CNVhac show that the microarray data can offer reliable CNV reports, and majority of CNV candidates can be confirmed by raw sequences. Therefore, the CNV candidates given by a good caller could be highly reliable without cross-platform supporting, so additional experimental information should be applied in need instead of necessarily.

Serotonin–mushroom body circuit modulating the formation of anesthesia-resistant memory in Drosophila

PubMed Central

Lee, Pei-Tseng; Lin, Hsuan-Wen; Chang, Yu-Hsuan; Fu, Tsai-Feng; Dubnau, Josh; Hirsh, Jay; Lee, Tzumin; Chiang, Ann-Shyn

2011-01-01

Pavlovian olfactory learning in Drosophila produces two genetically distinct forms of intermediate-term memories: anesthesia-sensitive memory, which requires the amnesiac gene, and anesthesia-resistant memory (ARM), which requires the radish gene. Here, we report that ARM is specifically enhanced or inhibited in flies with elevated or reduced serotonin (5HT) levels, respectively. The requirement for 5HT was additive with the memory defect of the amnesiac mutation but was occluded by the radish mutation. This result suggests that 5HT and Radish protein act on the same pathway for ARM formation. Three supporting lines of evidence indicate that ARM formation requires 5HT released from only two dorsal paired medial (DPM) neurons onto the mushroom bodies (MBs), the olfactory learning and memory center in Drosophila: (i) DPM neurons were 5HT-antibody immunopositive; (ii) temporal inhibition of 5HT synthesis or release from DPM neurons, but not from other serotonergic neurons, impaired ARM formation; (iii) knocking down the expression of d5HT1A serotonin receptors in α/β MB neurons, which are innervated by DPM neurons, inhibited ARM formation. Thus, in addition to the Amnesiac peptide required for anesthesia-sensitive memory formation, the two DPM neurons also release 5HT acting on MB neurons for ARM formation. PMID:21808003

Clinical Note Creation, Binning, and Artificial Intelligence

PubMed Central

Deliberato, Rodrigo Octávio; Stone, David J

2017-01-01

The creation of medical notes in software applications poses an intrinsic problem in workflow as the technology inherently intervenes in the processes of collecting and assembling information, as well as the production of a data-driven note that meets both individual and healthcare system requirements. In addition, the note writing applications in currently available electronic health records (EHRs) do not function to support decision making to any substantial degree. We suggest that artificial intelligence (AI) could be utilized to facilitate the workflows of the data collection and assembly processes, as well as to support the development of personalized, yet data-driven assessments and plans. PMID:28778845

Knowledge, Skills, and Resources for Pharmacy Informatics Education

PubMed Central

Fox, Brent I.; Flynn, Allen J.; Fortier, Christopher R.; Clauson, Kevin A.

2011-01-01

Pharmacy has an established history of technology use to support business processes. Pharmacy informatics education within doctor of pharmacy programs, however, is inconsistent, despite its inclusion as a requirement in the 2007 Accreditation Council for Pharmacy Education Standards and Guidelines. This manuscript describes pharmacy informatics knowledge and skills that all graduating pharmacy students should possess, conceptualized within the framework of the medication use process. Additionally, we suggest core source materials and specific learning activities to support pharmacy informatics education. We conclude with a brief discussion of emerging changes in the practice model. These changes are facilitated by pharmacy informatics and will inevitably become commonplace in our graduates’ practice environment. PMID:21829267

Knowledge, skills, and resources for pharmacy informatics education.

PubMed

Fox, Brent I; Flynn, Allen J; Fortier, Christopher R; Clauson, Kevin A

2011-06-10

Pharmacy has an established history of technology use to support business processes. Pharmacy informatics education within doctor of pharmacy programs, however, is inconsistent, despite its inclusion as a requirement in the 2007 Accreditation Council for Pharmacy Education Standards and Guidelines. This manuscript describes pharmacy informatics knowledge and skills that all graduating pharmacy students should possess, conceptualized within the framework of the medication use process. Additionally, we suggest core source materials and specific learning activities to support pharmacy informatics education. We conclude with a brief discussion of emerging changes in the practice model. These changes are facilitated by pharmacy informatics and will inevitably become commonplace in our graduates' practice environment.

The role of Space Station Freedom in the Human Exploration Initiative

NASA Technical Reports Server (NTRS)

Ahlf, P. R.; Saucillo, R. J.; Meredith, B. D.; Peach, L. L.

1990-01-01

Exploration accommodation requirements for Space Station Freedom (SSF) and mission-supporting capabilities have been studied. For supporting the Human Exploration Initiative (HEI), SSF will accommodate two functions with augmentations to the baseline Assembly Complete configuration. First, it will be an earth-orbiting transportation node providing facilities and resources (crew, power, communications) for space vehicle assembly, testing, processing and postflight servicing. Second, it will be an in-space laboratory for science research and technology development. The evolutionary design of SSF will allow the on-orbit addition of pressurized laboratory and habitation modules, power generation equipment, truss structure, and unpressurized vehicle processing platforms.

Space biology initiative program definition review. Trade study 4: Design modularity and commonality

NASA Technical Reports Server (NTRS)

Jackson, L. Neal; Crenshaw, John, Sr.; Davidson, William L.; Herbert, Frank J.; Bilodeau, James W.; Stoval, J. Michael; Sutton, Terry

1989-01-01

The relative cost impacts (up or down) of developing Space Biology hardware using design modularity and commonality is studied. Recommendations for how the hardware development should be accomplished to meet optimum design modularity requirements for Life Science investigation hardware will be provided. In addition, the relative cost impacts of implementing commonality of hardware for all Space Biology hardware are defined. Cost analysis and supporting recommendations for levels of modularity and commonality are presented. A mathematical or statistical cost analysis method with the capability to support development of production design modularity and commonality impacts to parametric cost analysis is provided.

Foreign Students in the United States: Policies and Legislation

DTIC Science & Technology

2007-05-11

Language ( TOEFL ) in order to demonstrate that they could effectively study and provide instruction in English. In Asian countries, such as China...determining whether TOEFL scores are fraudulent until the student actually arrives in the United States. At this time, written offers of support have...have reacted by not admitting any graduate students from countries with a history of fraudulent TOEFL scores, or requiring additional in- person

Evidence, Interpretation, and Qualification from Multiple Reports of Long-Term Outcomes in the Multimodal Treatment Study of Children with ADHD (MTA): Part I--Executive Summary

ERIC Educational Resources Information Center

Swanson, James; Arnold, L. Eugene; Kraemer, Helena; Hechtman, Lily; Molina, Brooke; Hinshaw, Stephen; Vitiello, Benedetto; Jensen, Peter; Steinhoff, Ken; Lerner, Marc; Greenhill, Laurence; Abikoff, Howard; Wells, Karen; Epstein, Jeffery; Elliott, Glen; Newcorn, Jeffrey; Hoza, Betsy; Wigal, Timothy

2008-01-01

Objective: To review the primary and secondary findings from the Multimodal Treatment study of ADHD (MTA) published over the past decade as three sets of articles. Method: In a two-part article--Part I: Executive Summary (without distracting details) and Part II: Supporting Details (with additional background and detail required by the complexity…

Dental cements for definitive luting: a review and practical clinical considerations.

PubMed

Hill, Edward E

2007-07-01

Dental cement used to attach an indirect restoration to a prepared tooth is called a luting agent. A clinically relevant discussion of conventional and contemporary definitive luting agents is presented in this article. Physical properties are listed in table form to assist in comparison and decision-making. Additional subtopics include luting agent requirements, classifications, retention and bonding, cement considerations for implant-supported teeth, and fatigue failure.

Army Equipment Modernization Plan

DTIC Science & Technology

2013-01-01

750 weapons. This weapon is approximately 60 percent lighter than the current weapon – the M2 Heavy Machine Gun . • $21.3M (WTCV) procures 12,000...key soldier Portfolio accomplishments (fY11/12): • Reduced Soldier load in Afghanistan by replac- ing 501 M240B Medium Machine Guns with Lightweight...lightening the Soldier load. » 5,000 additional .50 cal Machine guns supporting increased requirements for Theater and Sustainment, Protection and

Leadership and Management of Medical Treatment Facilities: Case Study of Charleston Naval Hospital, 1988-1993

DTIC Science & Technology

1993-06-01

Additional preparations included conducting nurse training in trauma/combat casualty care , streamlining the patient admissions and tracking procedures...departments (i.e. surgery, ambulatory care , operating rooms, maternity ward, etc.) cooperation between the Director of Nursing and the directors of clinical...provide the 107 At quality care , staff support from nursing , administration, and ancillary services was required. s Director for Surgical Services The

Orbital service module systems analysis study documentation. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1978-01-01

Potentially feasible system concepts for providing additional power, thermal control, and attitude to the baseline orbiter were investigated in order to support a greater variety of space missions and to extend the orbiter's ability to remain in orbit. Results of these analyses include an incremental growth plan that offers the flexibility of adding capability as, and when, it is needed in order to satisfy emerging user requirements.

Advanced Nuclear Technology. Using Technology for Small Modular Reactor Staff Optimization, Improved Effectiveness, and Cost Containment, 3002007071

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loflin, Leonard

Through this grant, the U.S. Department of Energy (DOE) will review several functional areas within a nuclear power plant, including fire protection, operations and operations support, refueling, training, procurement, maintenance, site engineering, and others. Several functional areas need to be examined since there appears to be no single staffing area or approach that alone has the potential for significant staff optimization at new nuclear power plants. Several of the functional areas will require a review of technology options such as automation, remote monitoring, fleet wide monitoring, new and specialized instrumentation, human factors engineering, risk informed analysis and PRAs, component andmore » system condition monitoring and reporting, just in time training, electronic and automated procedures, electronic tools for configuration management and license and design basis information, etc., that may be applied to support optimization. Additionally, the project will require a review key regulatory issues that affect staffing and could be optimized with additional technology input. Opportunities to further optimize staffing levels and staffing functions by selection of design attributes of physical systems and structures need also be identified. A goal of this project is to develop a prioritized assessment of the functional areas, and R&D actions needed for those functional areas, to provide the best optimization« less

Space Shuttle Solid Rocket Booster Debris Assessment

NASA Technical Reports Server (NTRS)

Kendall, Kristin; Kanner, Howard; Yu, Weiping

2006-01-01

The Space Shuttle Columbia Accident revealed a fundamental problem of the Space Shuttle Program regarding debris. Prior to the tragedy, the Space Shuttle requirement stated that no debris should be liberated that would jeopardize the flight crew and/or mission success. When the accident investigation determined that a large piece of foam debris was the primary cause of the loss of the shuttle and crew, it became apparent that the risk and scope of - damage that could be caused by certain types of debris, especially - ice and foam, were not fully understood. There was no clear understanding of the materials that could become debris, the path the debris might take during flight, the structures the debris might impact or the damage the impact might cause. In addition to supporting the primary NASA and USA goal of returning the Space Shuttle to flight by understanding the SRB debris environment and capability to withstand that environment, the SRB debris assessment project was divided into four primary tasks that were required to be completed to support the RTF goal. These tasks were (1) debris environment definition, (2) impact testing, (3) model correlation and (4) hardware evaluation. Additionally, the project aligned with USA's corporate goals of safety, customer satisfaction, professional development and fiscal accountability.

Results of the Particulate Contamination Control Trade Study for Space Suit Life Support Development

NASA Technical Reports Server (NTRS)

Cognata, Thomas J.; Conger, Bruce; Paul, Heather L.

2009-01-01

As the United States plans to return astronauts to the moon and eventually to Mars, designing the most effective, efficient, and robust space suit life support system that will operate successfully in these dusty environments is vital. There is some knowledge of the contaminants and level of infiltration expected from the Lunar and Mars dust, however risk mitigation strategies and filtration designs to prevent contamination within the space suit life support system are still undefined. A trade study was initiated to identify and address these concerns, and to develop new requirements for the Constellation Space Suit Element (CSSE) Portable Life Support System (PLSS). This trade study investigates historical methods of particulate contamination control in space suits and vehicles, and evaluated the possibility of using commercial technologies for this application. In addition, the trade study examined potential filtration designs. This paper summarizes the results of this trade study.

Framing a Knowledge Base for a Legal Expert System Dealing with Indeterminate Concepts.

PubMed

Araszkiewicz, Michał; Łopatkiewicz, Agata; Zienkiewicz, Adam; Zurek, Tomasz

2015-01-01

Despite decades of development of formal tools for modelling legal knowledge and reasoning, the creation of a fully fledged legal decision support system remains challenging. Among those challenges, such system requires an enormous amount of commonsense knowledge to derive legal expertise. This paper describes the development of a negotiation decision support system (the Parenting Plan Support System or PPSS) to support parents in drafting an agreement (the parenting plan) for the exercise of parental custody of minor children after a divorce is granted. The main objective here is to discuss problems of framing an intuitively appealing and computationally efficient knowledge base that can adequately represent the indeterminate legal concept of the well-being of the child in the context of continental legal culture and of Polish law in particular. In addition to commonsense reasoning, interpretation of such a concept demands both legal expertise and significant professional knowledge from other domains.

Framing a Knowledge Base for a Legal Expert System Dealing with Indeterminate Concepts

PubMed Central

Araszkiewicz, Michał; Łopatkiewicz, Agata; Zienkiewicz, Adam

2015-01-01

Despite decades of development of formal tools for modelling legal knowledge and reasoning, the creation of a fully fledged legal decision support system remains challenging. Among those challenges, such system requires an enormous amount of commonsense knowledge to derive legal expertise. This paper describes the development of a negotiation decision support system (the Parenting Plan Support System or PPSS) to support parents in drafting an agreement (the parenting plan) for the exercise of parental custody of minor children after a divorce is granted. The main objective here is to discuss problems of framing an intuitively appealing and computationally efficient knowledge base that can adequately represent the indeterminate legal concept of the well-being of the child in the context of continental legal culture and of Polish law in particular. In addition to commonsense reasoning, interpretation of such a concept demands both legal expertise and significant professional knowledge from other domains. PMID:26495435

ESnet authentication services and trust federations

NASA Astrophysics Data System (ADS)

Muruganantham, Dhivakaran; Helm, Mike; Genovese, Tony

2005-01-01

ESnet provides authentication services and trust federation support for SciDAC projects, collaboratories, and other distributed computing applications. The ESnet ATF team operates the DOEGrids Certificate Authority, available to all DOE Office of Science programs, plus several custom CAs, including one for the National Fusion Collaboratory and one for NERSC. The secure hardware and software environment developed to support CAs is suitable for supporting additional custom authentication and authorization applications that your program might require. Seamless, secure interoperation across organizational and international boundaries is vital to collaborative science. We are fostering the development of international PKI federations by founding the TAGPMA, the American regional PMA, and the worldwide IGTF Policy Management Authority (PMA), as well as participating in European and Asian regional PMAs. We are investigating and prototyping distributed authentication technology that will allow us to support the "roaming scientist" (distributed wireless via eduroam), as well as more secure authentication methods (one-time password tokens).

Directly observed treatment, short-course strategy and multidrug-resistant tuberculosis: are any modifications required?

PubMed Central

Bastian, I.; Rigouts, L.; Van Deun, A.; Portaels, F.

2000-01-01

Multidrug-resistant tuberculosis (MDRTB) should be defined as tuberculosis with resistance to at least isoniazid and rifampicin because these drugs are the cornerstone of short-course chemotherapy, and combined isoniazid and rifampicin resistance requires prolonged treatment with second-line agents. Short-course chemotherapy is a key ingredient in the tuberculosis control strategy known as directly observed treatment, short-course (DOTS). For populations in which multidrug-resistant tuberculosis is endemic, the outcome of the standard short-course chemotherapy regimen remains uncertain. Unacceptable failure rates have been reported and resistance to additional agents may be induced. As a consequence there have been calls for well-functioning DOTS programmes to provide additional services in areas with high rates of multidrug-resistant tuberculosis. These "DOTS-plus for MDRTB programmes" may need to modify all five elements of the DOTS strategy: the treatment may need to be individualized rather than standardized; laboratory services may need to provide facilities for on-site culture and antibiotic susceptibility testing; reliable supplies of a wide range of expensive second-line agents would have to be supplied; operational studies would be required to determine the indications for and format of the expanded programmes; financial and technical support from international organizations and Western governments would be needed in addition to that obtained from local governments. PMID:10743297

Employment Interventions for Individuals with ASD: The Relative Efficacy of Supported Employment With or Without Prior Project SEARCH Training.

PubMed

Schall, Carol M; Wehman, Paul; Brooke, Valerie; Graham, Carolyn; McDonough, Jennifer; Brooke, Alissa; Ham, Whitney; Rounds, Rachael; Lau, Stephanie; Allen, Jaclyn

2015-12-01

This paper presents findings from a retrospective observational records review study that compares the outcomes associated with implementation of supported employment (SE) with and without prior Project SEARCH with ASD Supports (PS-ASD) on wages earned, time spent in intervention, and job retention. Results suggest that SE resulted in competitive employment for 45 adults with ASD. Twenty-five individuals received prior intervention through PS-ASD while the other 20 individuals received SE only. Individuals in this sample who received PS-ASD required fewer hours of intervention. Additionally, individuals in the PS-ASD group achieved a mean higher wage and had higher retention rates than their peers who received SE only. Further research with a larger sample is needed to confirm these findings.

[Organization of anesthesia management and advanced life support at military medical evacuation levels].

PubMed

Shchegolev, A V; Petrakov, V A; Savchenko, I F

2014-07-01

Anesthesia management and advanced life support for the severely wounded personnel at military medical evacuation levels in armed conflict (local war) is time-consuming and resource-requiring task. One of the mathematical modeling methods was used to evaluate capabilities of anesthesia and intensive care units at tactical level. Obtained result allows us to tell that there is a need to make several system changes of the existing system of anesthesia management and advanced life support for the severely wounded personnel at military medical evacuation levels. In addition to increasing number of staff of anesthesiology-critical care during the given period of time another solution should be the creation of an early evacuation to a specialized medical care level by special means while conducting intensive monitoring and treatment.

Functional design to support CDTI/DABS flight experiments

NASA Technical Reports Server (NTRS)

Goka, T.

1982-01-01

The objectives of this project are to: (1) provide a generalized functional design of CDTI avionics using the FAA developd DABS/ATARS ground system as the 'traffic sensor', (2) specify software modifications and/or additions to the existing DABS/ATARS ground system to support CDTI avionics, (3) assess the existing avionics of a NASA research aircraft in terms of CDTI applications, and (4) apply the generalized functional design to provide research flight experiment capability. DABS Data Link Formats are first specified for CDTI flight experiments. The set of CDTI/DABS Format specifications becomes a vehicle to coordinate the CDTI avionics and ground system designs, and hence, to develop overall system requirements. The report is the first iteration of a system design and development effort to support eventual CDTI flight test experiments.

Circular pump support of blood circulation in the human body

NASA Astrophysics Data System (ADS)

Medvedev, A. E.; Fomin, V. M.; Prikhodko, Yu. M.; Cherniavskiy, A. M.; Fomichev, V. P.; Fomichev, A. V.; Chekhov, V. P.; Ruzmatov, T. M.

2016-10-01

The need of circulatory support systems in the treatment of chronic heart failure is increasing constantly, as 20% of patients in the waiting list die every year. Despite the great need for mechanical heart support systems, using of available systems is limited by the expensiveness. In addition, there is no one system that is 100% responsible to all medical and technical requirements, and would be completely safe for patient. Therefore, further research in the field of circu-latory support systems, considering health and technical requirements is relevant. One of the new directions in the study are disc pumps of viscous friction for liquid transporting, based on the Tesla pump principle. The operation principle of pumps based on the phenomenon of the boundary layer which is formed on the disk rotating in a fluid. There are experimental studies results of models with different variants of the rotor suspension, the various forms and the number of disks, forms the pump housing. However, none of the above samples was not brought to clinical trials. Furthermore, despite the promise of this model is still used today in some circulatory support systems are no similar type pump. Published data provide a basis for further development and testing of the pump model and allow to hope for leveling a number of significant shortcomings of modern left ventricular bypass systems.

A magnetic isolation and pointing system for the astrometric telescope facility

NASA Technical Reports Server (NTRS)

Smith, Marcie; Hibble, William; Wolke, Patrick J.

1993-01-01

The astrometric telescope facility (ATF), a 20-meter telescope designed for long-term detection and observation of planetary systems outside of the solar system, is scheduled to be a major user of the Space Station's payload pointing system (PPS) capabilities. However, because the ATF has such a stringent pointing stability specification (as low as 0.01 arcsec error over the frequency range from 5 to 200 hertz) and requires +/- 180-degree roll rotation around the telescope's line of sight, the ATF's utilization of the PPS requires the addition of a mechanism or mechanisms to enhance the basic PPS capabilities. The results of a study conducted to investigate the ATF pointing performance achievable by the addition of a magnetic isolation and pointing (MIPS) system between the PPS upper gimbal and the ATF, and separately, by the addition of a passive isolation system between the Space Station and the PPS base are presented. In addition, the study produced requirements on magnetic force and gap motion as a function of the level of Space Station disturbance. These results were used to support the definition of a candidate MIPS. Pointing performance results from the study indicate that a MIPS can meet the ATF pointing requirements in the presence of a PPS base transitional acceleration of up to 0.018g, with reasonable restrictions placed on the isolation and pointing bandwidths. By contrast, the passive base isolator system must have an unrealistically low isolation bandwidth on all axes (less than 0.1 hertz) to meet ATF pointing requirements. The candidate MIPS is based on an assumed base translational disturbance of 0.01g. The system fits within the available annular region between the PPS and ATF while meeting power and weight limitations and providing the required payload roll motion. Payload data and power services are provided by noncontacting transfer devices.

The Perceived Psychological Responsibilities Of A Strength And Conditioning Coach.

PubMed

Radcliffe, Jon N; Comfort, Paul; Fawcett, Tom

2016-09-22

Research is limited in exploring the specific psychology oriented responsibilities of the strength and conditioning professional. The present research explored the psychological responsibilities adopted by accredited strength and conditioning coaches. Participants comprised 10 participants working within the UK, 3 within the USA and 5 within Australia offering a cross section of experience from raging sport disciplines and educational backgrounds. Participants were interviewed either in person or via Skype. Thematic clustering was employed utilizing interpretative phonological analysis to identify common themes. Over half (61%) of the respondents reported that their position as a strength and conditioning coach required additional psychology orientated responsibilities. These comprised a counselling role in the absence of psychologist the use of 'softer skills' in a mentoring role of the athlete during a challenging situation. The coach could play an influential role in shaping the mentality of the team. The coach identifies how the role results in working to relay information for the athlete to other support staff and similarly from the support staff through the athlete. The coach identifies how the role results in working to relay information for the athlete to other support staff and similarly from the support staff to the athlete. In addition to identifying the resonant psychological orientated responsibilities discussion is made with specific focus on the ethical boundary to which strength and conditioning coaches must reside regarding the competencies to provide psychological support.

Doula support during first-trimester surgical abortion: a randomized controlled trial.

PubMed

Chor, Julie; Hill, Brandon; Martins, Summer; Mistretta, Stephanie; Patel, Ashlesha; Gilliam, Melissa

2015-01-01

The objective of the study was to evaluate the impact of doula support on first-trimester abortion care. Women were randomized to receive doula support or routine care during first-trimester surgical abortion. We examined the effect of doula support on pain during abortion using a 100 mm visual analog scale. The study had the statistical power to detect a 20% difference in mean pain scores. Secondary measures included satisfaction, procedure duration, and patient recommendations regarding doula support. Two hundred fourteen women completed the study: 106 received doula support, and 108 received routine care. The groups did not differ regarding demographics, gestational age, or medical history. Pain scores in the doula and control groups did not differ at speculum insertion (38.6 [±26.3 mm] vs 43.6 mm [±25.9 mm], P = .18) or procedure completion (68.2 [±28.0 mm] vs 70.6 mm [±23.5 mm], P = .52). Procedure duration (3.39 [±2.83 min] vs 3.18 min [±2.36 min], P = .55) and patient satisfaction (75.2 [±28.6 mm] vs 74.6 mm [±27.4 mm], P = .89) did not differ between the doula and control groups. Among women who received doula support, 96.2% recommended routine doula support for abortion and 60.4% indicated interest in training as doulas. Among women who did not receive doula support, 71.6% of women would have wanted it. Additional clinical staff was needed to provide support for 2.9% of women in the doula group and 14.7% of controls (P < .01). Although doula support did not have a measurable effect on pain or satisfaction, women overwhelmingly recommended it for routine care. Women receiving doula support were less likely to require additional clinic support resources. Doula support therefore may address patient psychosocial needs. Copyright © 2015 Elsevier Inc. All rights reserved.

Social support and vulnerability: state of the art in relation to families and children.

PubMed

MacElveen-Hoehn, P; Eyres, S J

1984-01-01

The purpose of this presentation is to review the concepts of social support and vulnerable families and children, propose a theoretical model on coping and adaptation, and ascertain any significant implications for the delivery of health care services and future research. The review of the literature indicates that major problems persist in the classification, conceptualization, empirical investigation, and clinical application of social support due to a lack of clarity regarding the definition of social support and how it works. Related perspectives such as bonding, child development, and child rearing also reaffirm the need for and the utilization of social support. High-risk factors, such as low maternal age, poverty, single parenthood, and long-term health problems, increase the vulnerability of families and children. This literature strongly suggests that the interactions of adults and children with supportive members of their social networks are important in the development of essential cognitive and social skills, as well as for the promotion of security and comfort. Supports from individuals, families, and groups also are associated with more successful adaptation and favorable outcomes. Despite numerous articles and research projects, however, questions concerning how social support works to assist vulnerable children and families remain. Seven factors are proposed as a theoretical model to identify threatening situations and coping difficulties so that appropriate support can be provided. These factors are surprise, experience, confusion, perceived effectiveness, perceived allies, perceived uniqueness of threat, and overload. Additional testing is required for this model so that a more meaningful investigation and utilization of social support can be established. Additional research also is indicated to determine the specific types of support needed in the presence of certain factors, network style preferences, the supply and demand for support over the life span, and cultural aspects of coping and support processes. The position that appropriate social support will promote mastery and self-determination has significant implications for health professionals.

The Reynolds Creek Experimental Watershed: A Hydro-Geo-Climatic Observatory for the 21^{st} Century

NASA Astrophysics Data System (ADS)

Marks, D.; Seyfried, M.; Flerchinger, G.

2006-12-01

Long-term hydro-climatic data on a watershed scale are critical to improving our understanding of basic hydrologic and ecologic processes because they provide a context to assess inter-annual variability and allow us to document longer-term trends. In addition, a scientific infrastructure that captures the spatial variations within a watershed are required to identify recharge areas, describe the amount and timing of streamflow generation and understand the variability of vegetation. These basic data, combined with soil microclimate information, are required to describe the milieu for geochemical weathering and soil formation. Data from watersheds that include significant human activities, such as grazing, farming, irrigation, and urbanization, represent conditions typical to most watersheds and are critical for determining the signature of human induced changes on hydrologic processes and the water cycle. The Reynolds Creek Experimental Watershed (RCEW), a 239 km2 drainage in the Owyhee Mountains near Boise, Idaho, was added to the USDA Agricultural Research Service watershed program in 1960. The vision for RCEW as an outdoor laboratory to support watershed research was described 1965 in the first volume of Water Resources Research [Robins et al., 1965]. The RCEW has supported a sustained data collection network for over 45 years. The first 35 years of data were presented in a series of papers in 2001 [Marks, 2001]. More recently, there has been an effort to better describe spatial variations within the watershed, and research is currently supported by 9 weirs, 32 primary and 5 secondary meteorological measurement stations, 26 precipitation stations, 8 snow course and 5 snow study sites, and 5 eddy covariance systems. In addition, soil microclimate (moisture and temperature) profile data are collected eight sites with surface data collected at an additional 19 sites. These support a wide range of experimental investigations including snow hydrology and physics, cold season hydrology, geophysics, water quality, model development and testing, water and carbon flux experiments, ecosystem processes, grazing effects, and mountain climate research. Active watershed manipulation allows fire ecology and hydrology, vegetation-climate inter-action, watershed restoration, grazing and wildlife management, and invasive plant research.

Planning and Estimation of Operations Support Requirements

NASA Technical Reports Server (NTRS)

Newhouse, Marilyn E.; Barley, Bryan; Bacskay, Allen; Clardy, Dennon

2010-01-01

Life Cycle Cost (LCC) estimates during the proposal and early design phases, as well as project replans during the development phase, are heavily focused on hardware development schedules and costs. Operations (phase E) costs are typically small compared to the spacecraft development and test costs. This, combined with the long lead time for realizing operations costs, can lead to de-emphasizing estimation of operations support requirements during proposal, early design, and replan cost exercises. The Discovery and New Frontiers (D&NF) programs comprise small, cost-capped missions supporting scientific exploration of the solar system. Any LCC growth can directly impact the programs' ability to fund new missions, and even moderate yearly underestimates of the operations costs can present significant LCC impacts for deep space missions with long operational durations. The National Aeronautics and Space Administration (NASA) D&NF Program Office at Marshall Space Flight Center (MSFC) recently studied cost overruns and schedule delays for 5 missions. The goal was to identify the underlying causes for the overruns and delays, and to develop practical mitigations to assist the D&NF projects in identifying potential risks and controlling the associated impacts to proposed mission costs and schedules. The study found that 4 out of the 5 missions studied had significant overruns at or after launch due to underestimation of the complexity and supporting requirements for operations activities; the fifth mission had not launched at the time of the mission. The drivers behind these overruns include overly optimistic assumptions regarding the savings resulting from the use of heritage technology, late development of operations requirements, inadequate planning for sustaining engineering and the special requirements of long duration missions (e.g., knowledge retention and hardware/software refresh), and delayed completion of ground system development work. This paper updates the D&NF LCC study, looking at the operations (phase E) cost drivers in more detail and extending the study to include 2 additional missions and identifies areas for increased emphasis by project management in order to improve the fidelity of operations estimates.

Channel access schemes and fiber optic configurations for integrated-services local area networks

NASA Astrophysics Data System (ADS)

Nassehi, M. Mehdi

1987-03-01

Local Area Networks are in common use for data communications and have enjoyed great success. Recently, there is a growing interest in using a single network to support many applications in addition to traditional data traffic. These additional applications introduce new requirements in terms of volume of traffic and real-time delivery of data which are not met by existing networks. To satisfy these requirements, a high-bandwidth tranmission medium, such as fiber optics, and a distributed channel access scheme for the efficient sharing of the bandwidth among the various applications are needed. As far as the throughput-delay requirements of the various application are concerned, a network structure along with a distributed channel access are proposed which incorporate appropriate scheduling policies for the transmission of outstanding messages on the network. A dynamic scheduling policy was devised which outperforms all existing policies in terms of minimizing the expected cost per message. A broadcast mechanism was devised for the efficient dissemination of all relevant information. Fiber optic technology is considered for the high-bandwidth transmisison medium.

Channel access schemes and fiber optic configurations for integrated-services local area networks. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Nassehi, M. Mehdi

1987-01-01

Local Area Networks are in common use for data communications and have enjoyed great success. Recently, there is a growing interest in using a single network to support many applications in addition to traditional data traffic. These additional applications introduce new requirements in terms of volume of traffic and real-time delivery of data which are not met by existing networks. To satisfy these requirements, a high-bandwidth tranmission medium, such as fiber optics, and a distributed channel access scheme for the efficient sharing of the bandwidth among the various applications are needed. As far as the throughput-delay requirements of the various application are concerned, a network structure along with a distributed channel access are proposed which incorporate appropriate scheduling policies for the transmission of outstanding messages on the network. A dynamic scheduling policy was devised which outperforms all existing policies in terms of minimizing the expected cost per message. A broadcast mechanism was devised for the efficient dissemination of all relevant information. Fiber optic technology is considered for the high-bandwidth transmisison medium.

Using the Web for Recruitment, Screening, Tracking, Data Management, and Quality Control in a Dietary Assessment Clinical Validation Trial

PubMed Central

Hahn, Harry; Henry, Judith; Chacko, Sara; Winter, Ashley; Cambou, Mary C

2010-01-01

Screening and tracking subjects and data management in clinical trials require significant investments in manpower that can be reduced through the use of web-based systems. To support a validation trial of various dietary assessment tools that required multiple clinic visits and eight repeats of online assessments, we developed an interactive web-based system to automate all levels of management of a biomarker-based clinical trial. The “Energetics System” was developed to support 1) the work of the study coordinator in recruiting, screening and tracking subject flow, 2) the need of the principal investigator to review study progress, and 3) continuous data analysis. The system was designed to automate web-based self-screening into the trial. It supported scheduling tasks and triggered tailored messaging for late and non-responders. For the investigators, it provided real time status overviews on all subjects, created electronic case reports, supported data queries and prepared analytic data files. Encryption and multi-level password protection were used to insure data privacy. The system was programmed iteratively and required six months of a web programmer's time along with active team engagement. In this study the enhancement in speed and efficiency of recruitment and quality of data collection as a result of this system outweighed the initial investment. Web-based systems have the potential to streamline the process of recruitment and day-to-day management of clinical trials in addition to improving efficiency and quality. Because of their added value they should be considered for trials of moderate size or complexity. Grant support: NIH funded R01CA105048. PMID:19925884

The 1995 NASA guide to graduate support

NASA Technical Reports Server (NTRS)

1994-01-01

The future of the United States is in the classrooms of America and tomorrow's scientific and technological capabilities are derived from today's investments in research. In 1980, NASA initiated the Graduate Student Researchers Program (GSRP) to cultivate additional research ties to the academic community and to support promising students pursuing advanced degrees in science and engineering. Since then, approximately 1300 students have completed the program's requirements. In 1987, the program was expanded to include the Underrepresented Minority and Disabled Focus (UMDF) Component. This program was designed to increase participation of underrepresented groups in graduate study and research and, ultimately, in space science and aerospace technology careers. Approximately 270 minority students have completed the program's requirements while making significant contributions to the nation's aerospace efforts. Continuing to expand fellowship opportunities, NASA announced the Graduate Student Fellowships in Global Change Research in 1990. Designed to support the rapid growth in the study of earth as a system, more than 250 fellowships have been awarded. And, in 1992, NASA announced opportunities in the multiagency High Performance Computing and Communications (HPCC) Program designed to accelerate the development and application of massively parallel processing. Approximately five new fellowships will be awarded yearly. This booklet will guide you in your efforts to participate in programs for graduate student support.

Treading the clinical pathway: a qualitative study of advanced practice nurses in a local health district in Australia.

PubMed

Luck, Lauretta; Wilkes, Lesley; O'Baugh, Jennifer

2015-01-01

Career planning in nursing is often haphazard, with many studies showing that nurses need personal motivation, education, and the support of workplaces, which are often dominated by political and fiscal agendas. Nurses often need institutional and personal support to plan their careers and make decisions regarding their career aspirations. A descriptive qualitative design was used. Data were gathered using semi-structured digitally recorded interviews and analysed for common categories. Twenty seven (n = 27) participants were interviewed. There were four categories revealed by the participants who described their career progression experiences: moving up the ladder, changing jobs for career progression, self-driven and the effects of institutional environments. Many of the participants' careers had been shaped serendipitously. Similar to other studies, these nurses felt political, institutional and financial factors impacted on their career opportunities. There are implications for nursing managers with more support required for nurses to plan their career trajectories. In addition to an organisation centred approach to career planning, nurse leaders and managers must take into account the personal and professional requirements of their nurses. Nurses themselves also need to take personal responsibility for career development. Greater support for nurses' career planning and personal drive will help organisations to plan their future workforce needs.

Application of higher harmonic blade feathering for helicopter vibration reduction

NASA Technical Reports Server (NTRS)

Powers, R. W.

1978-01-01

Higher harmonic blade feathering for helicopter vibration reduction is considered. Recent wind tunnel tests confirmed the effectiveness of higher harmonic control in reducing articulated rotor vibratory hub loads. Several predictive analyses developed in support of the NASA program were shown to be capable of calculating single harmonic control inputs required to minimize a single 4P hub response. In addition, a multiple-input, multiple-output harmonic control predictive analysis was developed. All techniques developed thus far obtain a solution by extracting empirical transfer functions from sampled data. Algorithm data sampling and processing requirements are minimal to encourage adaptive control system application of such techniques in a flight environment.

Requirements for Successful Adoption of a Glucose Measurement System Into a Hospital POC Program.

PubMed

Füzéry, Anna K; Cembrowski, George S

2016-07-01

Widespread and successful implementation of any glucose measurement system in a hospital point-of-care (POC) program requires a number of features in addition to accurate and reliable analytical performance. Such features include, but are not limited to, a system's glucose-hematocrit dependence, durability, information technology capabilities, and battery capacity and battery life. While the study of Ottiger et al in this issue supports the analytical accuracy and reliability of Bayer's CONTOUR XT® blood glucose monitoring system, the suitability of other features of this system for a hospital POC program remains to be established. © 2016 Diabetes Technology Society.

Sample sizes needed for specified margins of relative error in the estimates of the repeatability and reproducibility standard deviations.

PubMed

McClure, Foster D; Lee, Jung K

2005-01-01

Sample size formulas are developed to estimate the repeatability and reproducibility standard deviations (Sr and S(R)) such that the actual error in (Sr and S(R)) relative to their respective true values, sigmar and sigmaR, are at predefined levels. The statistical consequences associated with AOAC INTERNATIONAL required sample size to validate an analytical method are discussed. In addition, formulas to estimate the uncertainties of (Sr and S(R)) were derived and are provided as supporting documentation. Formula for the Number of Replicates Required for a Specified Margin of Relative Error in the Estimate of the Repeatability Standard Deviation.

On the halophytic nature of mangroves

USGS Publications Warehouse

Krauss, Ken W.; Ball, Marilyn C.

2013-01-01

Scientists have discussed the halophytic nature of intertidal plants for decades, and have generally suggested that inherent differentiation of an obligate halophyte from a facultative halophyte relates strongly to whether the plant can survive in fresh water, and not much else. In this mini-review, we provide additional insight to support the pervasive notion that mangroves as a group are truly facultative halophytes, and thus add discourse to the alternate view that mangroves have an obligate salinity requirement. Indeed, growth and physiological optima are realized at moderate salinity concentrations in mangroves, but we maintain the notion that current evidence suggests that survival is not dependent upon a physiological requirement for salt.

Usability evaluation of the digital anger thermometer app.

PubMed

Mattson, Donald C

2017-09-01

The digital anger thermometer is a prototype for a mobile application (app) for use with adults in anger management treatment. The digital anger thermometer incorporates standards of software development in addition to anger management resources from the Substance Abuse and Mental Health Services Administration. The digital anger thermometer underwent a usability study conducted by five expert reviewers. The results indicate that it is easy to learn, efficient, and ergonomically sound. However, it does not offer support features or user-error tolerance. The digital anger thermometer prototype requires additional usability studies and comparative research in order for it to become an actual mental health app.

Light Z' in heterotic string standardlike models

NASA Astrophysics Data System (ADS)

Athanasopoulos, P.; Faraggi, A. E.; Mehta, V. M.

2014-05-01

The discovery of the Higgs boson at the LHC supports the hypothesis that the Standard Model provides an effective parametrization of all subatomic experimental data up to the Planck scale. String theory, which provides a viable perturbative approach to quantum gravity, requires for its consistency the existence of additional gauge symmetries beyond the Standard Model. The construction of heterotic string models with a viable light Z' is, however, highly constrained. We outline the construction of standardlike heterotic string models that allow for an additional Abelian gauge symmetry that may remain unbroken down to low scales. We present a string inspired model, consistent with the string constraints.

Research Opportunities Supporting the Vision for Space Exploration from the Transformation of the Former Microgravity Materials Science Program

NASA Technical Reports Server (NTRS)

Clinton, R. G., Jr.; Szofran, Frank; Bassler, Julie A.; Schlagheck, Ronald A.; Cook, Mary Beth

2005-01-01

The Microgravity Materials Science Program established a strong research capability through partnerships between NASA and the scientific research community. With the announcement of the vision for space exploration, additional emphasis in strategic materials science areas was necessary. The President's Commission recognized that achieving its exploration objectives would require significant technical innovation, research, and development in focal areas defined as "enabling technologies." Among the 17 enabling technologies identified for initial focus were: advanced structures, advanced power and propulsion; closed-loop life support and habitability; extravehicular activity systems; autonomous systems and robotics; scientific data collection and analysis, biomedical risk mitigation; and planetary in situ resource utilization. Mission success may depend upon use of local resources to fabricate a replacement part to repair a critical system. Future propulsion systems will require materials with a wide range of mechanical, thermophysical, and thermochemical properties, many of them well beyond capabilities of today's materials systems. Materials challenges have also been identified by experts working to develop advanced life support systems. In responding to the vision for space exploration, the Microgravity Materials Science Program aggressively transformed its research portfolio and focused materials science areas of emphasis to include space radiation shielding; in situ fabrication and repair for life support systems; in situ resource utilization for life support consumables; and advanced materials for exploration, including materials science for space propulsion systems and for life support systems. The purpose of this paper is to inform the scientific community of these new research directions and opportunities to utilize their materials science expertise and capabilities to support the vision for space exploration.

Starship Life Support

NASA Technical Reports Server (NTRS)

Jones, Harry W.

2009-01-01

The design and mass cost of a starship and its life support system are investigated. The mission plan for a multi generational interstellar voyage to colonize a new planet is used to describe the starship design, including the crew habitat, accommodations, and life support. Only current technology is assumed. Highly reliable life support systems can be provided with reasonably small additional mass, suggesting that they can support long duration missions. Bioregenerative life support, growing crop plants that provide food, water, and oxygen, has been thought to need less mass than providing stored food for long duration missions. The large initial mass of hydroponics systems is paid for over time by saving the mass of stored food. However, the yearly logistics mass required to support a bioregenerative system exceeds the mass of food solids it produces, so that supplying stored dehydrated food always requires less mass than bioregenerative food production. A mixed system that grows about half the food and supplies the other half dehydrated has advantages that allow it to breakeven with stored dehydrated food in about 66 years. However, moderate increases in the hydroponics system mass to achieve high reliability, such as adding spares that double the system mass and replacing the initial system every 100 years, increase the mass cost of bioregenerative life support. In this case, the high reliability half food growing, half food supplying system does not breakeven for 389 years. An even higher reliability half and half system, with three times original system mass and replacing the system every 50 years, never breaks even. Growing food for starship life support requires more mass than providing dehydrated food, even for multigeneration voyages of hundreds of years. The benefits of growing some food may justify the added mass cost. Much more efficient recycling food production is wanted but may not be possible. A single multigenerational interstellar voyage to colonize a new planet would have cost similar to that of the Apollo program. Cost is reduced if a small crew travels slowly and lands with minimal equipment. We can go to the stars!

Life Support with Failures and Variable Supply

NASA Technical Reports Server (NTRS)

Jones, Harry

2010-01-01

The life support system for long duration missions will recycle oxygen and water to reduce the material resupply mass from Earth. The impact of life support failures was investigated by dynamic simulation of a lunar outpost habitat life support model. The model was modified to simulate resupply delays, power failures, recycling system failures, and storage failures. Many failures impact the lunar outpost water supply directly or indirectly, depending on the water balance and water storage. Failure effects on the water supply are reduced if Extra Vehicular Activity (EVA) water use is low and the water supply is ample. Additional oxygen can be supplied by scavenging unused propellant or by production from regolith, but the amounts obtained can vary significantly. The requirements for oxygen and water can also vary significantly, especially for EVA. Providing storage buffers can improve efficiency and reliability, and minimize the chance of supply failing to meet demand. Life support failures and supply variations can be survivable if effective solutions are provided by the system design

ProVac Global Initiative: a vision shaped by ten years of supporting evidence-based policy decisions.

PubMed

Jauregui, Barbara; Janusz, Cara Bess; Clark, Andrew D; Sinha, Anushua; Garcia, Ana Gabriela Felix; Resch, Stephen; Toscano, Cristiana M; Sanderson, Colin; Andrus, Jon Kim

2015-05-07

The Pan American Health Organization (PAHO) created the ProVac Initiative in 2004 with the goal of strengthening national technical capacity to make evidence-based decisions on new vaccine introduction, focusing on economic evaluations. In view of the 10th anniversary of the ProVac Initiative, this article describes its progress and reflects on lessons learned to guide the next phase. We quantified the output of the Initiative's capacity-building efforts and critically assess its progress toward achieving the milestones originally proposed in 2004. Additionally, we reviewed how country studies supported by ProVac have directly informed and strengthened the deliberations around new vaccine introduction. Since 2004, ProVac has conducted four regional workshops and supported 24 health economic analyses in 15 Latin American and Caribbean countries. Five Regional Centers of Excellence were funded, resulting in six operational research projects and nine publications. Twenty four decisions on new vaccine introductions were supported with ProVac studies. Enduring products include the TRIVAC and CERVIVAC cost-effectiveness models, the COSTVAC program costing model, methodological guides, workshop training materials and the OLIVES on-line data repository. Ten NITAGs were strengthened through ProVac activities. The evidence accumulated suggests that initiatives with emphasis on sustainable training and direct support for countries to generate evidence themselves, can help accelerate the introduction of the most valuable new vaccines. International and Regional Networks of Collaborators are necessary to provide technical support and tools to national teams conducting analyses. Timeliness, integration, quality and country ownership of the process are four necessary guiding principles for national economic evaluations to have an impact on policymaking. It would be an asset to have a model that offers different levels of complexity to choose from depending on the vaccine being evaluated, the availability of data, and the time frame of the decision. Decision support for new vaccine introduction in low- and middle-income countries is critical to maximizing the efficiency and impact of vaccination programs. Global technical cooperation will be required. In the future, PAHO and WHO have an opportunity to expand the reach of the ProVac philosophy, models, and methods to additional regions and countries requiring real-time support. The ProVac Global Initiative is proposed as an effective mechanism to do so. Copyright © 2015. Published by Elsevier Ltd.

Going above and beyond for implementation: the development and validity testing of the Implementation Citizenship Behavior Scale (ICBS).

PubMed

Ehrhart, Mark G; Aarons, Gregory A; Farahnak, Lauren R

2015-05-07

In line with recent research on the role of the inner context of organizations in implementation effectiveness, this study extends research on organizational citizenship behavior (OCB) to the domain of evidence-based practice (EBP) implementation. OCB encompasses those behaviors that go beyond what is required for a given job that contribute to greater organizational effectiveness. The goal of this study was to develop and test a measure of implementation citizenship behavior (ICB) or those behaviors that employees perform that go above and beyond what is required in order to support EBP implementation. The primary participants were 68 supervisors from ten mental health agencies throughout California. Items measuring ICB were developed based on past research on OCB and in consultation with experts on EBP implementation in mental health settings. Supervisors rated 357 of their subordinates on ICB and implementation success. In addition, 292 of the subordinates provided data on self-rated performance, attitudes towards EBPs, work experience, and full-time status. The supervisor sample was randomly split, with half used for exploratory factor analyses and the other half for confirmatory factor analyses. The entire sample of supervisors and subordinates was utilized for analyses assessing the reliability and construct validity of the measure. Exploratory factor analyses supported the proposed two-factor structure of the Implementation Citizenship Behavior Scale (ICBS): (1) Helping Others and (2) Keeping Informed. Confirmatory factor analyses with the other half of the sample supported the factor structure. Additional analyses supported the reliability and construct validity for the ICBS. The ICBS is a pragmatic brief measure (six items) that captures critical behaviors employees perform to go above and beyond the call of duty to support EBP implementation, including helping their fellow employees on implementation-related activities and keeping informed about issues related to EBP and implementation efforts. The ICBS can be used by researchers to better understand the outcomes of improved organizational support for implementation (i.e., implementation climate) and the proximal predictors of implementation effectiveness. The ICBS can also provide insight for organizations, practitioners, and managers by focusing on key employee behaviors that should increase the probability of implementation success.

New Zealand nurses' views on preceptoring international nurses.

PubMed

Riden, H; Jacobs, S; Marshall, B

2014-06-01

New Zealand encourages internationally educated nurses to seek registration in New Zealand to reduce local nursing shortages. Internationally educated nurses must meet requirements of the Health Practitioners Competency Assurance Act 2003, and demonstrate competency to practise through a clinical competency assessment programme. The purpose was to establish whether preceptors believe they are adequately prepared to assess nurses for whom English is a second language, and to determine the support and recognition received in the role. Preceptor training, workload, understanding of ethical and legal accountability, and perceived organizational values, support and attitudes were evaluated via an anonymous internet survey. Some preceptors do not meet Nursing Council of New Zealand standards and some work environments require nurses to preceptor international nurses. Many nurses believe the role is not valued despite the high workload requirements. Training increased preceptor confidence and preparedness for clinical assessment but additional education is required to understand ethical and legal accountability within the role. Many preceptors indicated they felt pressured into recording assessments they were uncomfortable with. Enhancing preceptorship acceptance could be achieved through institutional recognition of the role's value via workload consideration, institutional recognition or financial means. Increased preceptorship training, particularly around ethical and legal issues, would encourage preceptor confidence. Organizations must find ways of meeting these challenges while recognizing they are responsible for the work environment of both preceptors and internationally registered nurses for whom English is a second language. A register of preceptors could provide a platform for audit and quality assurance principles, ensuring adequate education and preparation of preceptors. Effective preceptorship requires training, recognition and support. Successful integration of international nurses depends on organizational recognition and implementation of these factors. © 2014 International Council of Nurses.

Recent development in software and automation tools for high-throughput discovery bioanalysis.

PubMed

Shou, Wilson Z; Zhang, Jun

2012-05-01

Bioanalysis with LC-MS/MS has been established as the method of choice for quantitative determination of drug candidates in biological matrices in drug discovery and development. The LC-MS/MS bioanalytical support for drug discovery, especially for early discovery, often requires high-throughput (HT) analysis of large numbers of samples (hundreds to thousands per day) generated from many structurally diverse compounds (tens to hundreds per day) with a very quick turnaround time, in order to provide important activity and liability data to move discovery projects forward. Another important consideration for discovery bioanalysis is its fit-for-purpose quality requirement depending on the particular experiments being conducted at this stage, and it is usually not as stringent as those required in bioanalysis supporting drug development. These aforementioned attributes of HT discovery bioanalysis made it an ideal candidate for using software and automation tools to eliminate manual steps, remove bottlenecks, improve efficiency and reduce turnaround time while maintaining adequate quality. In this article we will review various recent developments that facilitate automation of individual bioanalytical procedures, such as sample preparation, MS/MS method development, sample analysis and data review, as well as fully integrated software tools that manage the entire bioanalytical workflow in HT discovery bioanalysis. In addition, software tools supporting the emerging high-resolution accurate MS bioanalytical approach are also discussed.

In-Space Cryogenic Propellant Depot Stepping Stone

NASA Technical Reports Server (NTRS)

Howell, Joe T.; Mankins, John C.; Fikes, John C.

2005-01-01

An In-Space Cryogenic Propellant Depot (ISCPD) is an important stepping stone to provide the capability to preposition, store, manufacture, and later use the propellants for Earth-Neighborhood campaigns and beyond. An in-space propellant depot will provide affordable propellants and other similar consumables to support the development of sustainable and affordable exploration strategies as well as commercial space activities. An in-space propellant depot not only requires technology development in key areas such as zero boil-off storage and fluid transfer, but in other areas such as lightweight structures, highly reliable connectors, and autonomous operations. These technologies can be applicable to a broad range of propellant depot concepts or specific to a certain design. In addition, these technologies are required for spacecraft and orbit transfer vehicle propulsion and power systems, and space life support. Generally, applications of this technology require long-term storage, on-orbit fluid transfer and supply, cryogenic propellant production from water, unique instrumentation and autonomous operations. This paper discusses the reasons why such advances are important to future affordable and sustainable operations in space. This paper also discusses briefly R&D objectives comprising a promising approach to the systems planning and evolution into a meaningful stepping stone design, development, and implementation of an In-Space Cryogenic Propellant Depot. The success of a well-planned and orchestrated approach holds great promise for achieving innovation and revolutionary technology development for supporting future exploration and development of space.