Lived-Positive Emotionality in Elementary Physical Education

ERIC Educational Resources Information Center

Stuhr, Paul T.; Sutherland, Sue; Ward, Phillip

2012-01-01

Teaching is an occupation that requires a considerable amount of emotional energy when interacting with students. Through in-depth interviews, field notes and journal entries the investigators examined the phenomenon of lived-positive emotionality (LPE) involving two physical education (PE) teachers. The purpose of this study was to determine the…

17 CFR 229.1007 - (Item 1007) Source and amount of funds or other consideration.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false (Item 1007) Source and amount... Acquisitions (Regulation M-A) § 229.1007 (Item 1007) Source and amount of funds or other consideration. (a) Source of funds. State the specific sources and total amount of funds or other consideration to be used...

17 CFR 229.904 - (Item 904) Risk factors and other considerations.

Code of Federal Regulations, 2014 CFR

2014-04-01

...-up transaction on investors in each partnership, including, but not limited to: (1) The potential... difference(s). Instruction to Item 904. The requirement to quantify the effects of the roll-up transaction... partnerships is identified as a potential benefit of the roll-up transaction, the amount of cost savings and a...

17 CFR 229.904 - (Item 904) Risk factors and other considerations.

Code of Federal Regulations, 2012 CFR

2012-04-01

...-up transaction on investors in each partnership, including, but not limited to: (1) The potential... difference(s). Instruction to Item 904. The requirement to quantify the effects of the roll-up transaction... partnerships is identified as a potential benefit of the roll-up transaction, the amount of cost savings and a...

17 CFR 229.904 - (Item 904) Risk factors and other considerations.

Code of Federal Regulations, 2013 CFR

2013-04-01

...-up transaction on investors in each partnership, including, but not limited to: (1) The potential... difference(s). Instruction to Item 904. The requirement to quantify the effects of the roll-up transaction... partnerships is identified as a potential benefit of the roll-up transaction, the amount of cost savings and a...

Using DCOM to support interoperability in forest ecosystem management decision support systems

Treesearch

W.D. Potter; S. Liu; X. Deng; H.M. Rauscher

2000-01-01

Forest ecosystems exhibit complex dynamics over time and space. Management of forest ecosystems involves the need to forecast future states of complex systems that are often undergoing structural changes. This in turn requires integration of quantitative science and engineering components with sociopolitical, regulatory, and economic considerations. The amount of data...

26 CFR 1.848-3 - Interim rules for certain reinsurance agreements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... before November 15, 1991. (b) Interim rules. In determining a company's gross amount of premiums and... include the same amount in the gross amount of premiums and other consideration under section 848(d)(1)(A... the same amount in the gross amount of premiums and other consideration under section 848(d)(1)(A...

Sidewall-box airlift pump provides large flows for aeration, CO2 stripping, and water rotation in large dual-drain circular tanks

USDA-ARS?s Scientific Manuscript database

Conventional gas transfer technologies for aquaculture systems occupy a large amount of space, require a considerable capital investment, and can contribute to high electricity demand. In addition, diffused aeration in a circular culture tank can interfere with the hydrodynamics of water rotation a...

Elaboration and Organization Strategies Used by Prospective Class Teachers While Studying Social Studies Education Textbooks

ERIC Educational Resources Information Center

Tay, Bayram

2013-01-01

Problem Statement: Students spend a considerable amount of their time studying from textbooks, which play an important role in their learning activities. The strategies students use to learn work as guides, requiring them to mentally process, make sense of and internalize information offered to them during the instructional process. Of these,…

31 CFR 103.38 - Nature of records and retention period.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Nature of records and retention... § 103.38 Nature of records and retention period. (a) Wherever it is required that there be retained... reasonable period of time, taking into consideration the nature of the record, and the amount of time expired...

The role of the landscape architect in applied forest landscape management: a case study on process

Treesearch

Wayne Tlusty

1979-01-01

Land planning allocations are often multi-resource concepts, with visual quality objectives addressing the appropriate level of visual resource management. Current legislation and/or regulations often require interdisciplinary teams to implement planning decisions. A considerable amount of information is currently avail-able on visual assessment techniques both for...

Small Business Innovations (Helicopters)

NASA Technical Reports Server (NTRS)

1992-01-01

The amount of engine power required for a helicopter to hover is an important, but difficult, consideration in helicopter design. The EHPIC program model produces converged, freely distorted wake geometries that generate accurate analysis of wake-induced downwash, allowing good predictions of rotor thrust and power requirements. Continuum Dynamics, Inc., the Small Business Innovation Research (SBIR) company that developed EHPIC, also produces RotorCRAFT, a program for analysis of aerodynamic loading of helicopter blades in forward flight. Both helicopter codes have been licensed to commercial manufacturers.

Laser ablation inductively coupled plasma mass spectrometry measurement of isotope ratios in depleted uranium contaminated soils.

PubMed

Seltzer, Michael D

2003-09-01

Laser ablation of pressed soil pellets was examined as a means of direct sample introduction to enable inductively coupled plasma mass spectrometry (ICP-MS) screening of soils for residual depleted uranium (DU) contamination. Differentiation between depleted uranium, an anthropogenic contaminant, and naturally occurring uranium was accomplished on the basis of measured 235U/238U isotope ratios. The amount of sample preparation required for laser ablation is considerably less than that typically required for aqueous sample introduction. The amount of hazardous laboratory waste generated is diminished accordingly. During the present investigation, 235U/238U isotope ratios measured for field samples were in good agreement with those derived from gamma spectrometry measurements. However, substantial compensation was required to mitigate the effects of impaired pulse counting attributed to sample inhomogeneity and sporadic introduction of uranium analyte into the plasma.

Local-search based prediction of medical image registration error

NASA Astrophysics Data System (ADS)

Saygili, Görkem

2018-03-01

Medical image registration is a crucial task in many different medical imaging applications. Hence, considerable amount of work has been published recently that aim to predict the error in a registration without any human effort. If provided, these error predictions can be used as a feedback to the registration algorithm to further improve its performance. Recent methods generally start with extracting image-based and deformation-based features, then apply feature pooling and finally train a Random Forest (RF) regressor to predict the real registration error. Image-based features can be calculated after applying a single registration but provide limited accuracy whereas deformation-based features such as variation of deformation vector field may require up to 20 registrations which is a considerably high time-consuming task. This paper proposes to use extracted features from a local search algorithm as image-based features to estimate the error of a registration. The proposed method comprises a local search algorithm to find corresponding voxels between registered image pairs and based on the amount of shifts and stereo confidence measures, it predicts the amount of registration error in millimetres densely using a RF regressor. Compared to other algorithms in the literature, the proposed algorithm does not require multiple registrations, can be efficiently implemented on a Graphical Processing Unit (GPU) and can still provide highly accurate error predictions in existence of large registration error. Experimental results with real registrations on a public dataset indicate a substantially high accuracy achieved by using features from the local search algorithm.

29 CFR 530.303 - Considerations in determining amounts.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Considerations in determining amounts. 530.303 Section 530... REGULATIONS EMPLOYMENT OF HOMEWORKERS IN CERTAIN INDUSTRIES Civil Money Penalties § 530.303 Considerations in... representations; and (5) Exercise of due care. (b) An employer's financial inability to meet obligations under the...

26 CFR 1.848-0 - Outline of regulations under section 848.

Code of Federal Regulations, 2010 CFR

2010-04-01

... certain reinsurance agreements. (b) Gross amount of premiums and other consideration. (1) General rule. (2... the payment of premiums. (iii) Retired lives reserves. (4) Deferred and uncollected premiums. (c... excluded from the gross amount of premiums and other consideration. (1) In general. (2) Amounts received or...

Photorefractive Polymers for Updateable 3D Displays

DTIC Science & Technology

2010-02-24

Holographic 3D displays provide highly realistic images without the need for special eyewear , making them valuable tools for applications that require...situational awareness” such as medical, industrial , and military imaging. A considerable amount of research has been dedicated to the development of...imaging techniques that rely on special eyewear such as polarizing goggles have unwanted side-effects such as eye fatigue and motion sickness and

Solar power satellite life-cycle energy recovery consideration

NASA Astrophysics Data System (ADS)

Weingartner, S.; Blumenberg, J.

The construction, in-orbit installation and maintenance of a solar power satellite (SPS) will demand large amounts of energy. As a minimum requirement for an energy effective power satellite it is asked that this amount of energy be recovered. The energy effectiveness in this sense resulting in a positive net energy balance is a prerequisite for cost-effective power satellite. This paper concentrates on life-cycle energy recovery instead on monetary aspects. The trade-offs between various power generation systems (different types of solar cells, solar dynamic), various construction and installation strategies (using terrestrial or extra-terrestrial resources) and the expected/required lifetime of the SPS are reviewed. The presented work is based on a 2-year study performed at the Technical University of Munich. The study showed that the main energy which is needed to make a solar power satellite a reality is required for the production of the solar power components (up to 65%), especially for the solar cell production. Whereas transport into orbit accounts in the order of 20% and the receiving station on earth (rectenna) requires about 15% of the total energy investment. The energetic amortization time, i.e. the time the SPS has to be operational to give back the amount of energy which was needed for its production installation and operation, is about two years.

Mathematics and Science Learning Opportunities in Preschool Classrooms

PubMed Central

Piasta, Shayne B.; Pelatti, Christina Yeager; Miller, Heather Lynnine

2014-01-01

Research findings The present study observed and coded instruction in 65 preschool classrooms to examine (a) overall amounts and (b) types of mathematics and science learning opportunities experienced by preschool children as well as (c) the extent to which these opportunities were associated with classroom and program characteristics. Results indicated that children were afforded an average of 24 and 26 minutes of mathematics and science learning opportunities, respectively, corresponding to spending approximately 25% of total instructional time in each domain. Considerable variability existed, however, in the amounts and types of mathematics and science opportunities provided to children in their classrooms; to some extent, this variability was associated with teachers’ years of experience, teachers’ levels of education, and the socioeconomic status of children served in the program. Practice/policy Although results suggest greater integration of mathematics and science in preschool classrooms than previously established, there was considerable diversity in the amounts and types of learning opportunities provided in preschool classrooms. Affording mathematics and science experiences to all preschool children, as outlined in professional and state standards, may require additional professional development aimed at increasing preschool teachers’ understanding and implementation of learning opportunities in these two domains in their classrooms. PMID:25489205

Nutritional approach of the patient with diabetes mellitus and chronic kidney disease. A case report

PubMed

Torres Torres, Beatriz; Izaola Jáuregu, Olatz; De Luis Román, Daniel A

2017-05-08

The prevention and treatment of chronic kidney disease (CKD) in diabetes through diet and lifestyle have been a topic of much interest over the years. Consideration of the type and amount of carbohydrate, protein and fat is required for optimal blood glucose control, for clinical outcomes related to renal function and for consideration of risk reduction for cardiovascular disease. Depending on the CKD stage different dietary changes should be considered protein-calorie malnutrition is common in chronic kidney disease patients and is a powerful predictor of morbidity and mortality. We review the nutritional management of a diabetic patient throughout the progression of their CKD.

Mars rover 1988 concepts

NASA Technical Reports Server (NTRS)

Pivirotto, Donna Shirley; Penn, Thomas J.; Dias, William C.

1989-01-01

Results of FY88 studies of a sample-collecting Mars rover are presented. A variety of rover concepts are discussed which include different technical approaches to rover functions. The performance of rovers with different levels of automation is described and compared to the science requirement for 20 to 40 km to be traversed on the Martian surface and for 100 rock and soil samples to be collected. The analysis shows that a considerable amount of automation in roving and sampling is required to meet this requirement. Additional performance evaluation shows that advanced RTG's producing 500 W and 350 WHr of battery storage are needed to supply the rover.

Evaluation of the efficiency and fault density of software generated by code generators

NASA Technical Reports Server (NTRS)

Schreur, Barbara

1993-01-01

Flight computers and flight software are used for GN&C (guidance, navigation, and control), engine controllers, and avionics during missions. The software development requires the generation of a considerable amount of code. The engineers who generate the code make mistakes and the generation of a large body of code with high reliability requires considerable time. Computer-aided software engineering (CASE) tools are available which generates code automatically with inputs through graphical interfaces. These tools are referred to as code generators. In theory, code generators could write highly reliable code quickly and inexpensively. The various code generators offer different levels of reliability checking. Some check only the finished product while some allow checking of individual modules and combined sets of modules as well. Considering NASA's requirement for reliability, an in house manually generated code is needed. Furthermore, automatically generated code is reputed to be as efficient as the best manually generated code when executed. In house verification is warranted.

Oxygen and the evolution of metabolic pathways

NASA Technical Reports Server (NTRS)

Jahnke, L. L.

1986-01-01

While a considerable amount of evidence has been accumulated about the history of oxygen on this planet, little is known about the relative amounts to which primitive cells might have been exposed. One clue may be found in the metabolic pathways of extant microorganisms. While eucaryotes are principally aerobic organisms, a number are capable of anaerobic growth by fermentation. One such eucaryotic microorganism, Saccharomyces cerevisiae, will grow in the complete absence of oxygen when supplemented with unsaturated fatty acid and sterol. Oxygen-requiring enzymes are involved in the synthesis of both of these compounds. Studies have demonstrated that the oxidative desaturation of palmitic acid and the conversion of squalene to sterols occur in the range of 10-(3) to 10(-2) PAL. Thus, if the oxygen requirements of these enzymatic processes are an indication, eucaryotes might be more primitive than anticipated from the microfossil record. Results of studies on the oxygen requirements for sterol and unsaturated fatty acid synthesis in a more primitive procaryotic system are also discussed.

Design and preliminary assessment of Vanderbilt hand exoskeleton.

PubMed

Gasser, Benjamin W; Bennett, Daniel A; Durrough, Christina M; Goldfarb, Michael

2017-07-01

This paper presents the design of a hand exoskeleton intended to enable or facilitate bimanual activities of daily living (ADLs) for individuals with chronic upper extremity hemiparesis resulting from stroke. The paper describes design of the battery-powered, self-contained exoskeleton and presents the results of initial testing with a single subject with hemiparesis from stroke. Specifically, an experiment was conducted requiring the subject to repeatedly remove the lid from a water bottle both with and without the hand exoskeleton. The relative times required to remove the lid from the bottles was considerably lower when using the exoskeleton. Specifically, the average amount of time required to grasp the bottle with the paretic hand without the exoskeleton was 25.9 s, with a standard deviation of 33.5 s, while the corresponding average amount of time required to grasp the bottle with the exoskeleton was 5.1 s, with a standard deviation of 1.9 s. Thus, the task time involving the paretic hand was reduced by a factor of five, while the standard deviation was reduced by a factor of 16.

A numerical approach to controller design for the ACES facility

NASA Technical Reports Server (NTRS)

Frazier, W. Garth; Irwin, R. Dennis

1993-01-01

In recent years the employment of active control techniques for improving the performance of systems involving highly flexible structures has become a topic of considerable research interest. Most of these systems are quite complicated, using multiple actuators and sensors, and possessing high order models. The majority of analytical controller synthesis procedures capable of handling multivariable systems in a systematic way require considerable insight into the underlying mathematical theory to achieve a successful design. This insight is needed in selecting the proper weighting matrices or weighting functions to cast what is naturally a multiple constraint satisfaction problem into an unconstrained optimization problem. Although designers possessing considerable experience with these techniques have a feel for the proper choice of weights, others may spend a significant amount of time attempting to find an acceptable solution. Another disadvantage of such procedures is that the resulting controller has an order greater than or equal to that of the model used for the design. Of course, the order of these controllers can often be reduced, but again this requires a good understanding of the theory involved.

Development of an Integrated Human Factors Toolkit

NASA Technical Reports Server (NTRS)

Resnick, Marc L.

2003-01-01

An effective integration of human abilities and limitations is crucial to the success of all NASA missions. The Integrated Human Factors Toolkit facilitates this integration by assisting system designers and analysts to select the human factors tools that are most appropriate for the needs of each project. The HF Toolkit contains information about a broad variety of human factors tools addressing human requirements in the physical, information processing and human reliability domains. Analysis of each tool includes consideration of the most appropriate design stage, the amount of expertise in human factors that is required, the amount of experience with the tool and the target job tasks that are needed, and other factors that are critical for successful use of the tool. The benefits of the Toolkit include improved safety, reliability and effectiveness of NASA systems throughout the agency. This report outlines the initial stages of development for the Integrated Human Factors Toolkit.

Requirements Flowdown for Prognostics and Health Management

NASA Technical Reports Server (NTRS)

Goebel, Kai; Saxena, Abhinav; Roychoudhury, Indranil; Celaya, Jose R.; Saha, Bhaskar; Saha, Sankalita

2012-01-01

Prognostics and Health Management (PHM) principles have considerable promise to change the game of lifecycle cost of engineering systems at high safety levels by providing a reliable estimate of future system states. This estimate is a key for planning and decision making in an operational setting. While technology solutions have made considerable advances, the tie-in into the systems engineering process is lagging behind, which delays fielding of PHM-enabled systems. The derivation of specifications from high level requirements for algorithm performance to ensure quality predictions is not well developed. From an engineering perspective some key parameters driving the requirements for prognostics performance include: (1) maximum allowable Probability of Failure (PoF) of the prognostic system to bound the risk of losing an asset, (2) tolerable limits on proactive maintenance to minimize missed opportunity of asset usage, (3) lead time to specify the amount of advanced warning needed for actionable decisions, and (4) required confidence to specify when prognosis is sufficiently good to be used. This paper takes a systems engineering view towards the requirements specification process and presents a method for the flowdown process. A case study based on an electric Unmanned Aerial Vehicle (e-UAV) scenario demonstrates how top level requirements for performance, cost, and safety flow down to the health management level and specify quantitative requirements for prognostic algorithm performance.

Solar power satellite—Life-cycle energy recovery considerations

NASA Astrophysics Data System (ADS)

Weingartner, S.; Blumenberg, J.

1995-05-01

The construction, in-orbit installation and maintenance of a solar power satellite (SPS) will demand large amounts of energy. As a minimum requirement for an energy effective power satellite it is asked that this amount of energy be recovered. The energy effectiveness in this sense resulting in a positive net energy balance is a prerequisite for a cost-effective power satellite. This paper concentrates on life-cycle energy recovery instead of monetary aspects. The trade-offs between various power generation systems (different types of solar cells, solar dynamic), various construction and installation strategies (using terrestrial or extra-terrestrial resources) and the expected/required lifetime of the SPS are reviewed. The presented work is based on a 2-year study performed at the Technical University of Munich. The study showed that the main energy which is needed to make a solar power satellite a reality is required for the production of the solar power plant components (up to 65%), especially for the solar cell production. Whereas transport into orbit accounts in the order of 20% and the receiving station on Earth (rectenna) requires in the order of 15% of the total energy investment. The energetic amortization time, i.e. the time the SPS has to be operational to give back the amount of energy which was needed for its production, installation and operation, is in the order of two years.

Rational calculation accuracy in acousto-optical matrix-vector processor

NASA Astrophysics Data System (ADS)

Oparin, V. V.; Tigin, Dmitry V.

1994-01-01

The high speed of parallel computations for a comparatively small-size processor and acceptable power consumption makes the usage of acousto-optic matrix-vector multiplier (AOMVM) attractive for processing of large amounts of information in real time. The limited accuracy of computations is an essential disadvantage of such a processor. The reduced accuracy requirements allow for considerable simplification of the AOMVM architecture and the reduction of the demands on its components.

Don't ban PVC: incinerate and recycle it instead!

PubMed

Menke, Doris; Fiedler, Hiltrud; Zwahr, Heiner

2003-04-01

Plastics are making a growing contribution to sustainable development. For example, over an expected lifetime of 50 years, the use of window frames and insulating materials made of plastic in buildings save many times the energy required to manufacture them. Plastics for packaging purposes provide protection against damage and dirt contamination, thereby saving considerable amounts of material and energy. Choosing appropriate disposal strategies for plastic waste also helps to protect the environment (Mark 2000).

CCIR for Complex and Uncertain Environments

DTIC Science & Technology

2007-05-01

these purposes. Doctrine gives such a wide variety of reasons for using CCIR that the concept seems unfocused, giving the commander no true criteria...complex. The true effect that these issues have on CCIR is open to a considerable amount of debate. Every commander has the freedom to develop his...operations. He set a precedent that seems to have held true through the entire history of intelligence requirements – every step in the development

Pharmaceutical quality of "party pills" raises additional safety concerns in the use of illicit recreational drugs.

PubMed

Young, Simon A; Thrimawithana, Thilini R; Antia, Ushtana; Fredatovich, John D; Na, Yonky; Neale, Peter T; Roberts, Amy F; Zhou, Huanyi; Russell, Bruce

2013-06-14

To determine the content and release kinetics of 1-benzylpiperazine (BZP) and 1-(3-trifluoromethyl-phenyl)piperazine (TFMPP) from "party pill" formulations. From these data, the possible impact of pharmaceutical quality upon the safety of such illicit formulations may be inferred. The amount of BZP and TFMPP in party pill formulations was determined using a validated HPLC method. The in-vitro release kinetics of selected party pill brands were determined using a USP dissolution apparatus (75 rpm, 37.5 degrees Celsius). The release data were then fitted to a first order release model using PLOT software and the time taken to achieve 90% release reported. Many of the tested party pill brands contained amounts of BZP and TFMPP that varied considerably from that stated on the packaging; including considerable TFMPP content in some brands not labelled to contain this drug. Dissolution studies revealed that there was considerable variability in the release kinetics between brands; in one case 90% release required >30 minutes. Lack of quality control in party pill manufacture may have led to the toxic effects reported by users unaware of the true content and release of drug from pills. More stringent regulation in the manufacture and quality control of "new generation party pills" is essential to the harm reduction campaign.

Evolution of a Reconfigurable Processing Platform for a Next Generation Space Software Defined Radio

NASA Technical Reports Server (NTRS)

Kacpura, Thomas J.; Downey, Joseph A.; Anderson, Keffery R.; Baldwin, Keith

2014-01-01

The National Aeronautics and Space Administration (NASA)Harris Ka-Band Software Defined Radio (SDR) is the first, fully reprogrammable space-qualified SDR operating in the Ka-Band frequency range. Providing exceptionally higher data communication rates than previously possible, this SDR offers in-orbit reconfiguration, multi-waveform operation, and fast deployment due to its highly modular hardware and software architecture. Currently in operation on the International Space Station (ISS), this new paradigm of reconfigurable technology is enabling experimenters to investigate navigation and networking in the space environment.The modular SDR and the NASA developed Space Telecommunications Radio System (STRS) architecture standard are the basis for Harris reusable, digital signal processing space platform trademarked as AppSTAR. As a result, two new space radio products are a synthetic aperture radar payload and an Automatic Detection Surveillance Broadcast (ADS-B) receiver. In addition, Harris is currently developing many new products similar to the Ka-Band software defined radio for other applications. For NASAs next generation flight Ka-Band radio development, leveraging these advancements could lead to a more robust and more capable software defined radio.The space environment has special considerations different from terrestrial applications that must be considered for any system operated in space. Each space mission has unique requirements that can make these systems unique. These unique requirements can make products that are expensive and limited in reuse. Space systems put a premium on size, weight and power. A key trade is the amount of reconfigurability in a space system. The more reconfigurable the hardware platform, the easier it is to adapt to the platform to the next mission, and this reduces the amount of non-recurring engineering costs. However, the more reconfigurable platforms often use more spacecraft resources. Software has similar considerations to hardware. Having an architecture standard promotes reuse of software and firmware. Space platforms have limited processor capability, which makes the trade on the amount of amount of flexibility paramount.

Barophysiology and Biophysics

NASA Technical Reports Server (NTRS)

Powell, Michael R.

1999-01-01

Decompression is an important aspect of extravehicular activity (EVA). Errors can result in decompression sickness (DCS) if the protective measures are too liberal, while valuable on-orbit time is dissipated in prophylactic methodologies that are excessively conservative. Nucleation is an important consideration in many natural events, and its control is very important in many industrial procedures. The amount of Extravehicular Activity (EVA) that will be required during the construction of the International Space Station exceeds all of the other activity combined. The requirements in astronaut time and consumables (breathing oxygen and air) will be considerable. In an attempt to mitigate these requirements, Project ARGO was investigated in 1990 to investigate the effects of gravitational forces on the musculoskeletal system. This work has led to the present plans for the reduction of prebreathe duration. Over the past decade, research has been directed towards an understanding of the biophysical basis of the formation and growth of the decompression gas phase with the goal of improving the efficiency of the EVA process. In the past, we have direct work towards a more complete understanding of gas bubble formation and growth and exercise-enhanced washout during oxygen prebreathe.

Lighter-Than-Air and Pressurized Structures Technology for Unmanned Aerial Vehicles (UAVs)

DTIC Science & Technology

2010-01-01

through lighter-than-air or pressurized structures-based ( PSB ) technologies. Basically, we examined how to construct the UAV in such a way that a...considerable percentage of its weight will be supported by or composed of inflatable structures containing air or helium. In this way, PSB technology...will reduce the amount of energy required to keep the UAV aloft, thus allowing the use of smaller, slower, and quieter motors. Using PSB technology

OPERATOR BURDEN IN METAL ADDITIVE MANUFACTURING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elliott, Amy M; Love, Lonnie J

2016-01-01

Additive manufacturing (AM) is an emerging manufacturing process that creates usable machine parts via layer-by-layer joining of a stock material. With this layer-wise approach, high-performance geometries can be created which are impossible with traditional manufacturing methods. Metal AM technology has the potential to significantly reduce the manufacturing burden of developing custom hardware; however, a major consideration in choosing a metal AM system is the required amount of operator involvement (i.e., operator burden) in the manufacturing process. The operator burden not only determines the amount of operator training and specialization required but also the usability of the system in a facility.more » As operators of several metal AM processes, the Manufacturing Demonstration Facility (MDF) at Oak Ridge National Labs is uniquely poised to provide insight into requirements for operator involvement in each of the three major metal AM processes. The paper covers an overview of each of the three metal AM technologies, focusing on the burden on the operator to complete the build cycle, process the part for final use, and reset the AM equipment for future builds.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berra, P.B.; Chung, S.M.; Hachem, N.I.

This article presents techniques for managing a very large data/knowledge base to support multiple inference-mechanisms for logic programming. Because evaluation of goals can require accessing data from the extensional database, or EDB, in very general ways, one must often resort to indexing on all fields of the extensional database facts. This presents a formidable management problem in that the index data may be larger than the EDB itself. This problem becomes even more serious in this case of very large data/knowledge bases (hundreds of gigabytes), since considerably more hardware will be required to process and store the index data. Inmore » order to reduce the amount of index data considerably without losing generality, the authors form a surrogate file, which is a hashing transformation of the facts. Superimposed code words (SCW), concatenated code words (CCW), and transformed inverted lists (TIL) are possible structures for the surrogate file. since these transformations are quite regular and compact, the authors consider possible computer architecture for the processing of the surrogate file.« less

Density estimates of monarch butterflies overwintering in central Mexico

PubMed Central

Diffendorfer, Jay E.; López-Hoffman, Laura; Oberhauser, Karen; Pleasants, John; Semmens, Brice X.; Semmens, Darius; Taylor, Orley R.; Wiederholt, Ruscena

2017-01-01

Given the rapid population decline and recent petition for listing of the monarch butterfly (Danaus plexippus L.) under the Endangered Species Act, an accurate estimate of the Eastern, migratory population size is needed. Because of difficulty in counting individual monarchs, the number of hectares occupied by monarchs in the overwintering area is commonly used as a proxy for population size, which is then multiplied by the density of individuals per hectare to estimate population size. There is, however, considerable variation in published estimates of overwintering density, ranging from 6.9–60.9 million ha−1. We develop a probability distribution for overwinter density of monarch butterflies from six published density estimates. The mean density among the mixture of the six published estimates was ∼27.9 million butterflies ha−1 (95% CI [2.4–80.7] million ha−1); the mixture distribution is approximately log-normal, and as such is better represented by the median (21.1 million butterflies ha−1). Based upon assumptions regarding the number of milkweed needed to support monarchs, the amount of milkweed (Asclepias spp.) lost (0.86 billion stems) in the northern US plus the amount of milkweed remaining (1.34 billion stems), we estimate >1.8 billion stems is needed to return monarchs to an average population size of 6 ha. Considerable uncertainty exists in this required amount of milkweed because of the considerable uncertainty occurring in overwinter density estimates. Nevertheless, the estimate is on the same order as other published estimates. The studies included in our synthesis differ substantially by year, location, method, and measures of precision. A better understanding of the factors influencing overwintering density across space and time would be valuable for increasing the precision of conservation recommendations. PMID:28462031

Density estimates of monarch butterflies overwintering in central Mexico

USGS Publications Warehouse

Thogmartin, Wayne E.; Diffendorfer, James E.; Lopez-Hoffman, Laura; Oberhauser, Karen; Pleasants, John M.; Semmens, Brice X.; Semmens, Darius J.; Taylor, Orley R.; Wiederholt, Ruscena

2017-01-01

Given the rapid population decline and recent petition for listing of the monarch butterfly (Danaus plexippus L.) under the Endangered Species Act, an accurate estimate of the Eastern, migratory population size is needed. Because of difficulty in counting individual monarchs, the number of hectares occupied by monarchs in the overwintering area is commonly used as a proxy for population size, which is then multiplied by the density of individuals per hectare to estimate population size. There is, however, considerable variation in published estimates of overwintering density, ranging from 6.9–60.9 million ha−1. We develop a probability distribution for overwinter density of monarch butterflies from six published density estimates. The mean density among the mixture of the six published estimates was ∼27.9 million butterflies ha−1 (95% CI [2.4–80.7] million ha−1); the mixture distribution is approximately log-normal, and as such is better represented by the median (21.1 million butterflies ha−1). Based upon assumptions regarding the number of milkweed needed to support monarchs, the amount of milkweed (Asclepias spp.) lost (0.86 billion stems) in the northern US plus the amount of milkweed remaining (1.34 billion stems), we estimate >1.8 billion stems is needed to return monarchs to an average population size of 6 ha. Considerable uncertainty exists in this required amount of milkweed because of the considerable uncertainty occurring in overwinter density estimates. Nevertheless, the estimate is on the same order as other published estimates. The studies included in our synthesis differ substantially by year, location, method, and measures of precision. A better understanding of the factors influencing overwintering density across space and time would be valuable for increasing the precision of conservation recommendations.

Design Considerations for a Computationally-Lightweight Authentication Mechanism for Passive RFID Tags

DTIC Science & Technology

2009-09-01

suffer the power and complexity requirements of a public key system. 28 In [18], a simulation of the SHA –1 algorithm is performed on a Xilinx FPGA ... 256 bits. Thus, the construction of a hash table would need 2512 independent comparisons. It is known that hash collisions of the SHA –1 algorithm... SHA –1 algorithm for small-core FPGA design. Small-core FPGA design is the process by which a circuit is adapted to use the minimal amount of logic

Foreign Investment and National Security: Economic Considerations

DTIC Science & Technology

2010-02-08

euros. The OECD projects that the overall amount of direct investment flows in 2008 will decline as a result of lower levels of foreign direct...2.7 2.5 North America 129.9 244.4 n.a. 13.7 18.7 n.a. United States 101.0 175.4 192.9 10.7 13.4 12.5 Other developed econ . -34.6 46.7 n.a. -3.7...periodic regulatory impact assessments, and requirements that decisions to block an investment should be taken at high government levels . Critical

Foreign Investment and National Security: Economic Considerations

DTIC Science & Technology

2008-12-01

overall amount of direct investment flows in 2008 will decline as a result of lower levels of foreign direct investment into and out of the United States...244.4 n.a. 13.7 18.7 n.a. United States 101.0 175.4 192.9 10.7 13.4 12.5 Other developed econ . -34.6 46.7 n.a. -3.7 3.6 n.a. Developing economies...regulatory impact assessments, and requirements that decisions to block an investment should be taken at high government levels

Program Helps Decompose Complicated Design Problems

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.

1993-01-01

Time saved by intelligent decomposition into smaller, interrelated problems. DeMAID is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problem. Displays modules in N x N matrix format. Requires investment of time to generate and refine list of modules for input, it saves considerable amount of money and time in total design process, particularly new design problems in which ordering of modules has not been defined. Program also implemented to examine assembly-line process or ordering of tasks and milestones.

Alkanes and terpenes in wood and leaves of Pinus jeffreyi and P. sabiniana

Treesearch

Robert P. Adams; Jessica W. Wright

2012-01-01

The wood oils of Pinus jeffreyi and P. sabiniana contain considerable amounts of heptane (76.6%, 92%), on a monoterpene basis. However, when entire wood extractables is considered, the amounts drop considerably (3.4%, 36.8%) with the major portion of the wood oils being diterpene acids. The leaf oil of P. jeffreyi...

Guidelines on the diagnosis of noise-induced hearing loss for medicolegal purposes.

PubMed

Coles, R R; Lutman, M E; Buffin, J T

2000-08-01

These guidelines aim to assist in the diagnosis of noise-induced hearing loss (NIHL) in medicolegal settings. The task is to distinguish between possibility and probability, the legal criterion being 'more probable than not'. It is argued that the amount of NIHL needed to qualify for that diagnosis is that which is reliably measurable and identifiable on the audiogram. The three main requirements for the diagnosis of NIHL are defined: R1, high-frequency hearing impairment; R2, potentially hazardous amount of noise exposure; R3, identifiable high-frequency audiometric notch or bulge. Four modifying factors also need consideration: MF1, the clinical picture; MF2, compatibility with age and noise exposure; MF3, Robinson's criteria for other causation; MF4, complications such as asymmetry, mixed disorder and conductive hearing impairment.

An Open Source Rapid Computer Aided Control System Design Toolchain Using Scilab, Scicos and RTAI Linux

NASA Astrophysics Data System (ADS)

Bouchpan-Lerust-Juéry, L.

2007-08-01

Current and next generation on-board computer systems tend to implement real-time embedded control applications (e.g. Attitude and Orbit Control Subsystem (AOCS), Packet Utililization Standard (PUS), spacecraft autonomy . . . ) which must meet high standards of Reliability and Predictability as well as Safety. All these requirements require a considerable amount of effort and cost for Space Sofware Industry. This paper, in a first part, presents a free Open Source integrated solution to develop RTAI applications from analysis, design, simulation and direct implementation using code generation based on Open Source and in its second part summarises this suggested approach, its results and the conclusion for further work.

The role of evidence based medicine in neurotrauma.

PubMed

Honeybul, S; Ho, K M

2015-04-01

The introduction of evidence based medicine de-emphasised clinical experience and so-called "background information" and stressed the importance of evidence gained from clinical research when making clinical decisions. For many years randomised controlled trials have been seen to be the only way to advance clinical practice, however, applying this methodology in the context of severe trauma can be problematic. In addition, it is increasingly recognised that considerable clinical experience is required in order to critically evaluate the quality of the evidence and the validity of the conclusions as presented. A contemporary example is seen when considering the role of decompressive craniectomy in the management of neurotrauma. Although there is a considerable amount of evidence available attesting to the efficacy of the procedure, considerable clinical expertise is required in order to properly interpret the results of these studies and the implications for clinical practice. Given these limitations the time may have come for a redesign of the traditional pyramid of evidence, to a model that re-emphasises the importance of "background information" such as pathophysiology and acknowledges the role of clinical experience such that the evidence can be critically evaluated in its appropriate context and the subsequent implications for clinical practice be clearly and objectively defined. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

A guide to calculating habitat-quality metrics to inform conservation of highly mobile species

USGS Publications Warehouse

Bieri, Joanna A.; Sample, Christine; Thogmartin, Wayne E.; Diffendorfer, James E.; Earl, Julia E.; Erickson, Richard A.; Federico, Paula; Flockhart, D. T. Tyler; Nicol, Sam; Semmens, Darius J.; Skraber, T.; Wiederholt, Ruscena; Mattsson, Brady J.

2018-01-01

Many metrics exist for quantifying the relative value of habitats and pathways used by highly mobile species. Properly selecting and applying such metrics requires substantial background in mathematics and understanding the relevant management arena. To address this multidimensional challenge, we demonstrate and compare three measurements of habitat quality: graph-, occupancy-, and demographic-based metrics. Each metric provides insights into system dynamics, at the expense of increasing amounts and complexity of data and models. Our descriptions and comparisons of diverse habitat-quality metrics provide means for practitioners to overcome the modeling challenges associated with management or conservation of such highly mobile species. Whereas previous guidance for applying habitat-quality metrics has been scattered in diversified tracks of literature, we have brought this information together into an approachable format including accessible descriptions and a modeling case study for a typical example that conservation professionals can adapt for their own decision contexts and focal populations.Considerations for Resource ManagersManagement objectives, proposed actions, data availability and quality, and model assumptions are all relevant considerations when applying and interpreting habitat-quality metrics.Graph-based metrics answer questions related to habitat centrality and connectivity, are suitable for populations with any movement pattern, quantify basic spatial and temporal patterns of occupancy and movement, and require the least data.Occupancy-based metrics answer questions about likelihood of persistence or colonization, are suitable for populations that undergo localized extinctions, quantify spatial and temporal patterns of occupancy and movement, and require a moderate amount of data.Demographic-based metrics answer questions about relative or absolute population size, are suitable for populations with any movement pattern, quantify demographic processes and population dynamics, and require the most data.More real-world examples applying occupancy-based, agent-based, and continuous-based metrics to seasonally migratory species are needed to better understand challenges and opportunities for applying these metrics more broadly.

Benefits of High Strength Microalloyed Rebar

NASA Astrophysics Data System (ADS)

Wright, Michael

The amount of reinforcing bar (or "rebar") currently produced globally is estimated at over 400 million tons per year. With global infra-structure demands increasing, this production level is forecasted for continued expansion. Product requirements along with production levels are ever increasing, but as an industry there is minimal to no effort being put forth to produce a better product. Rather, rebar is being commoditized to a point where price is the only real consideration taken into account when purchasing rebar for major projects. This "pricing only" mentality results in a product that barely meets minimum standards.

Examination of space/volume requirements for US underground coal mine refuge alternatives.

PubMed

Porter, William L; Dempsey, Patrick G; Jansky, Jacqueline H

2017-01-01

The Mine Safety and Health Administration requires that 1.4 m 2 (15 ft 2 ) of floor space is to be provided for each person inside a refuge alternative (RA). However, the amount of floor space needed for a person to reside inside an RA and perform basic tasks is unknown. During testing, participants entered into an RA or a simulated RA of various space/volume configurations and performed several simulated tasks that are representative of the survivability tasks performed within an RA. The results indicate that the floor space requirements were generally adequate for the tasks studied. Certain tasks such as changing scrubber cartridges, using toilets, and moving about the RA were impacted by the minimum height tested (0.6 m). As such, RAs of this height will require critical design consideration as a whole and the supplies provided for use inside of the RA to ensure the ability to use an RA.

3D numerical modelling of the thermal state of deep geological nuclear waste repositories

NASA Astrophysics Data System (ADS)

Butov, R. A.; Drobyshevsky, N. I.; Moiseenko, E. V.; Tokarev, Yu. N.

2017-09-01

One of the important aspects of the high-level radioactive waste (HLW) disposal in deep geological repositories is ensuring the integrity of the engineered barriers which is, among other phenomena, considerably influenced by the thermal loads. As the HLW produce significant amount of heat, the design of the repository should maintain the balance between the cost-effectiveness of the construction and the sufficiency of the safety margins, including those imposed on the thermal conditions of the barriers. The 3D finite-element computer code FENIA was developed as a tool for simulation of thermal processes in deep geological repositories. Further the models for mechanical phenomena and groundwater hydraulics will be added resulting in a fully coupled thermo-hydro-mechanical (THM) solution. The long-term simulations of the thermal state were performed for two possible layouts of the repository. One was based on the proposed project of Russian repository, and another features larger HLW amount within the same space. The obtained results describe the spatial and temporal evolution of the temperature filed inside the repository and in the surrounding rock for 3500 years. These results show that practically all generated heat was ultimately absorbed by the host rock without any significant temperature increase. Still in the short time span even in case of smaller amount of the HLW the temperature maximum exceeds 100 °C, and for larger amount of the HLW the local temperature remains above 100 °C for considerable time. Thus, the substantiation of the long-term stability of the repository would require an extensive study of the materials properties and behaviour in order to remove the excessive conservatism from the simulations and to reduce the uncertainty of the input data.

The prenatal and immediate postpartum periods

PubMed Central

1989-01-01

A mother's nutritional status during pregnancy has important implications for both her own health and her ability to produce and breast-feed a healthy infant. Knowledge about adequate maternal nutrition during pregnancy is incomplete, however, and there is still considerable debate about the level of extra energy needed by a pregnant woman. A woman's usual nutritional requirements increase during pregnancy to meet her needs and those of the growing fetus. Additional energy is needed because of increased basal metabolism, the greater cost of physical activity, and the normal accumulation of fat as the energy reserve. The protein, vitamin and mineral requirements of the mother also increase during pregnancy, but the precise amounts for the last two are still a matter for discussion. A woman's weight increments during pregnancy vary between privileged and underprivileged communities. In addition to calcium, phosphorus and iron, a mother provides considerable amounts of protein and fat for fetal growth. Placental metabolism and placental blood flow, which are interrelated, are the most critical factors for fetal development. The nutritional requirements of healthy newborns vary widely according to their weight, gestational age, rate of growth, as well as environmental factors. However, recommendations for some components may be derived from the average composition of early human milk and the amounts consumed by healthy, mature newborns who are following a normal postpartum clinical course. The water requirements of infants are related to their caloric consumption, activity, rate of growth, and the ambient temperature. A postnatal weight loss of 5-8% of body weight is usual during the first few days of life in mature newborn infants; in contrast, infants who experienced intrauterine malnutrition lose little or no weight at all. The dynamic process of mother—newborn interaction from the first hours of life is intimately related to successful early breast-feeding. If this process is delayed, however, it may take longer and may be more difficult to achieve. Close mother—infant contact immediately after birth also helps infants to adapt to their new unsterile environment. Because drugs can interfere with bonding and breast-feeding, such substances should be given only when necessary and their effects should be evaluated. In general, young infants, especially newborns, have very irregular feeding intervals. It is advisable for numerous reasons to feed them whenever they indicate a need. PMID:2702124

[Survey of the present-day supply of fortified food products in Germany].

PubMed

Kersting, M; Hansen, C; Schöch, G

1995-12-01

A survey and critical evaluation of the present-day supply of fortified common food products on the German market is presented concerning products, nutrients and amounts for fortification. The data were collected from the original food labels by personal informations from the manufacturers (40 asked, 68% answered) and by a local market survey in Dortmund (spring 1994). A total of 288 fortified food products (78 manufacturers) were found out of 6 different food products (78 manufacturers) were found out of 6 different food categories (manufacturers/products): beverages (26/95), sweets (24/57), cereals (5/53), milk products (7/35), powdered instant beverages (10/31), ready-to-eat meals (6/17). Sugar was added to 56% of the fortified products. A total of 10 vitamins (E, B1, B2, B6, B12, C, niacin, folate, biotin, pantothenic acid) and 7 minerals (Na, K, Cl, Ca, P, Mg, Fe) were used for fortification. The number of nutrients used for fortification in single products ranged from 1 (94 products) to 16 (3 products). The amounts used for fortification per average portion varied considerably among the different products and the different nutrients in the food categories. In a considerable number of cases, amounts for fortification of more than 100% (maximum 660%) of the recommended daily dose of a nutrient (EC-directive for nutrition labelling) have been observed. Relatively to the contribution of a portion to meet the energy requirement, the fortification of cereals and milk-products (about 30%) as well as of sweets (about 10%) could be rated as acceptable whereas the fortification of beverages (about 50-100%) was overdone. The present-day supply of fortified food is extremely heterogenous from the qualitative and quantitative point of view. Therefore, it is rather difficult for the consumer to reach an overall nutrient intake that is in accordance with the recommendations. The specific requirements of children, who are a preferred group for food advertising, are not at all considered adequately.

Impact of uniform electrode current distribution on ETF. [Engineering Test Facility MHD generator

NASA Technical Reports Server (NTRS)

Bents, D. J.

1982-01-01

A basic reason for the complexity and sheer volume of electrode consolidation hardware in the MHD ETF Powertrain system is the channel electrode current distribution, which is non-uniform. If the channel design is altered to provide uniform electrode current distribution, the amount of hardware required decreases considerably, but at the possible expense of degraded channel performance. This paper explains the design impacts on the ETF electrode consolidation network associated with uniform channel electrode current distribution, and presents the alternate consolidation designs which occur. They are compared to the baseline (non-uniform current) design with respect to performance, and hardware requirements. A rational basis is presented for comparing the requirements for the different designs and the savings that result from uniform current distribution. Performance and cost impacts upon the combined cycle plant are discussed.

26 CFR 1.809-4 - Gross amount.

Code of Federal Regulations, 2010 CFR

2010-04-01

... categories of items taken into account are: (1) Premiums. (i) The gross amount of all premiums and other... premiums and premiums and other consideration arising out of reinsurance ceded. The term gross amount of... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Gross amount. 1.809-4 Section 1.809-4 Internal...

Mass Efficiency Considerations for Thermally Insulated Structural Skin of an Aerospace Vehicle

NASA Technical Reports Server (NTRS)

Blosser, Max L.

2012-01-01

An approximate equation was derived to predict the mass of insulation required to limit the maximum temperature reached by an insulated structure subjected to a transient heating pulse. In the course of the derivation two figures of merit were identified. One figure of merit correlates to the effectiveness of the heat capacity of the underlying structural material in reducing the amount of required insulation. The second figure of merit provides an indicator of the mass efficiency of the insulator material. An iterative, one dimensional finite element analysis was used to size the external insulation required to protect the structure at a single location on the Space Shuttle Orbiter and a reusable launch vehicle. Required insulation masses were calculated for a range of different materials for both structure and insulator. The required insulation masses calculated using the approximate equation were shown to typically agree with finite element results within 10 to 20 percent over the range of parameters studied. Finite element results closely followed the trends indicated by both figures of merit.

Considerations for an exercise prescription

NASA Technical Reports Server (NTRS)

Convertino, Victor A.

1989-01-01

A number of past and most recent research findings that describe some of the physiological responses to exercise in man and their relationship with exposure to various gravitational environments are discussed. Most of the data pertain to adaptations of the cardiovascular and body fluid systems. It should be kept in mind that the data from studies on microgravity simulation in man include exposures of relatively short duration (5 hours to 14 days). However, it is argued that the results may provide important guidelines for the consideration of many variables which are pertinent to the development of exercise prescription for long-duration space flight. The following considerations for exercise prescriptions during long-duration space flight are noted: (1) Relatively high aerobic fitness and strength, especially of the upper body musculature, should be a criterion for selection of astronauts who will be involved in EVA, since endurance and strength appear to be predominant characteristics for work performance. (2) Some degree of upper body strength will probably be required for effective performance of EVA. However, the endurance and strength required by the upper body for EVA can probably be obtained through preflight exercise prescription which involves swimming. (3) Although some degree of arm exercise may be required to maintain preflight endurance and strength, researchers propose that regular EVA will probably be sufficient to maintain the endurance and strength required to effectively perform work tasks during space flight. (4) A minimum of one maximal aerobic exercise every 7 to 10 days during space flight may be all that is necessary for maintenance of normal cardiovascular responsiveness and replacement of body fluids for reentry following prolonged space flight. (5) The possible reduction in the amount of exercise required for maintenance of cardiovascular system and body fluids in combination with the use of electromyostimulation (EMS) or methods other than conventional exercise for maintaining size and strength of muscles and bones needs great consideration for further research. These approaches represent a potential solution to the problem of compromising valuable time for exercise that is needed for daily operations.

Thermodynamic Considerations of Direct Oxygen Removal from Titanium by Utilizing the Deoxidation Capability of Rare Earth Metals

NASA Astrophysics Data System (ADS)

Okabe, Toru H.; Zheng, Chenyi; Taninouchi, Yu-ki

2018-06-01

Oxygen removal from metallic Ti is extremely difficult and, currently, there is no commercial process for effectively deoxidizing Ti or its alloys. The oxygen concentration in Ti scraps is normally higher than that in virgin metals such as in Ti sponges produced by the Kroll process. When scraps are remelted with virgin metals for producing primary ingots of Ti or its alloys, the amount of scrap that can be used is limited owing to the accumulation of oxygen impurities. Future demands of an increase in Ti production and of mitigating environmental impacts require that the amount of scrap recycled as a feed material of Ti ingots should also increase. Therefore, it is important to develop methods for removing oxygen directly from Ti scraps. In this study, we evaluated the deoxidation limit for β-Ti using Y or light rare earth metals (La, Ce, Pr, or Nd) as a deoxidant. Thermodynamic considerations suggest that extra-low-oxygen Ti, with an oxygen concentration of 100 mass ppm or less can be obtained using a molten salt equilibrating with rare earth metals. The results presented herein also indicate that methods based on molten salt electrolysis for producing rare earth metals can be utilized for effectively and directly deoxidizing Ti scraps.

THE FUEL ELEMENT GRAPHITE. Project DRAGON.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graham, L.W.; Price, M.S.T.

1963-01-15

The main requirements of a fuel element graphite for reactors based on the Dragon concept are low transmission coefficient for fission products, dimensional stability under service conditions, high strength, high thermal conductivity, high purity, and high resistance to oxidation. Since conclusions reached in early 1960, a considerable amount of information has accumulated concerning the likely behaviour of graphites in high temperature reactor systems, particularly data on dimensional stability under irradiation. The influence of this new knowledge on the development of fuel element graphite with the Dragon Project is discussed in detail in the final section of this paper.

Evaluation of the Insecticidal Efficacy of Wild Type and Recombinant Baculoviruses.

PubMed

Popham, Holly J R; Ellersieck, Mark R; Li, Huarong; Bonning, Bryony C

2016-01-01

A considerable amount of work has been undertaken to genetically enhance the efficacy of baculovirus insecticides. Following construction of a genetically altered baculovirus, laboratory bioassays are used to quantify various parameters of insecticidal activity such as the median lethal concentration (or dose) required to kill 50 % of infected larvae (LC50 or LD50), median survival of larvae infected (ST50), and feeding damage incurred by infected larvae. In this chapter, protocols are described for a variety of bioassays and the corresponding data analyses for assessment of the insecticidal activity of baculovirus insecticides.

Chicken eggshell as suitable calcium source at home.

PubMed

Brun, Lucas R; Lupo, Maela; Delorenzi, Damián A; Di Loreto, Verónica E; Rigalli, Alfredo

2013-09-01

Taken into consideration that the deficiency of calcium (Ca) in the diet is a common problem, the aim of this work was to study the chicken eggshell as Ca source at home. It was evaluated: (1) different mechanisms to process eggshells and find an easy way to determine the required amount of Ca at home and; (2) the flavor and the texture for eggshell fortified food. Chemical and mechanical methods of eggshell processing were evaluated. Changes in flavor and texture were evaluated in volunteers coordinated by a professional chef. A single eggshell contains 2.07 ± 0.18 g of Ca; therefore half an eggshell could provide the amount of Ca needed by adult human beings per day. The best way to use chicken eggshell as Ca dietary supplement is powdered to add to bread, pizza or spaghetti as there were small changes in texture and no changes in flavor.

Hydroisomerization of n-Hexane Using Acidified Metal-Organic Framework and Platinum Nanoparticles.

PubMed

Sabyrov, Kairat; Jiang, Juncong; Yaghi, Omar M; Somorjai, Gabor A

2017-09-13

Exceptionally high surface area and ordered nanopores of a metal-organic framework (MOF) are exploited to encapsulate and homogeneously disperse a considerable amount of phosphotungstic acid (PTA). When combined with platinum nanoparticles positioned on the external surface of the MOF, the construct shows a high catalytic activity for hydroisomerization of n-hexane, a reaction requiring hydrogenation/dehydrogenation and moderate to strong Brønsted acid sites. Characterization of the catalytic activity and acidic sites as a function of PTA loading demonstrates that both the concentration and strength of acidic sites are highest for the catalyst with the largest amount of PTA. The MOF construct containing 60% PTA by weight produces isoalkanes with 100% selectivity and 9-fold increased mass activity as compared to a more traditional aluminosilicate catalyst, further demonstrating the capacity of the MOF to contain a high concentration of active sites necessary for the isomerization reaction.

PARENTS’ UNDERSTANDING OF INFORMATION REGARDING THEIR CHILD’S POSTOPERATIVE PAIN MANAGEMENT

PubMed Central

Tait, Alan R.; Voepel-Lewis, Terri; Snyder, Robin M.; Malviya, Shobha

2009-01-01

Objectives Unlike information provided for research, information disclosed to patients for treatment or procedures is largely unregulated and, as such, there is likely considerable variability in the type and amount of disclosure. This study was designed to examine the nature of information provided to parents regarding options for postoperative pain control and their understanding thereof. Methods 187 parents of children scheduled to undergo a surgical procedure requiring inpatient postoperative pain control completed questionnaires that elicited information regarding their perceptions and understanding of, and satisfaction with, information regarding postoperative pain management. Results Results showed that there was considerable variability in the content and amount of information provided to parents based on the method of postoperative pain control provided. Parents whose child received Patient Controlled Analgesia (PCA) were given significantly (P< 0.025) more information on the risks and benefits compared to those receiving Nurse Controlled or intravenous-prn (NCA or IV) analgesia. Approximately one third of parents had no understanding of the risks associated with postoperative pain management. Parents who received pain information preoperatively and who were given information regarding the risks and benefits had improved understanding compared to parents who received no or minimal information (P< 0.001). Furthermore, information that was deemed unclear or insufficient resulted in decreased parental understanding. Discussion These results demonstrate the variability in the type and amount of information provided to parents regarding their child’s postoperative pain control and reinforce the importance of clear and full disclosure of pain information, particularly with respect to the risks and benefits. PMID:18716495

Cost and Business Analysis Module (CABAM). Revision A

NASA Technical Reports Server (NTRS)

Lee, Michael Hosung

1997-01-01

In the recent couple of decades, due to international competition, the US launchers lost a considerable amount of market share in the international space launch industry'. Increased international competition has continuously affected the US dominance to eventually place great pressure on future US space launch programs. To compete for future payload and passenger delivery markets, new launch vehicles must first be capable of reliably reaching a number of desired orbital destinations with customer-desired payload capacities. However, the ultimate success of a new launch vehicle program will depend on the launch price it is capable of offering it's customers. Extremely aggressive pricing strategies will be required for a new domestic launch service to compete with low-price international launchers. Low launch prices, then, naturally require a tight budget for the launch program economy. Therefore, budget constraints established by low-pricing requirements eventually place pressure on new launch vehicles to have unprecedentedly low Life Cycle Costs (LCC's).

Data inversion algorithm development for the hologen occultation experiment

NASA Technical Reports Server (NTRS)

Gordley, Larry L.; Mlynczak, Martin G.

1986-01-01

The successful retrieval of atmospheric parameters from radiometric measurement requires not only the ability to do ideal radiometric calculations, but also a detailed understanding of instrument characteristics. Therefore a considerable amount of time was spent in instrument characterization in the form of test data analysis and mathematical formulation. Analyses of solar-to-reference interference (electrical cross-talk), detector nonuniformity, instrument balance error, electronic filter time-constants and noise character were conducted. A second area of effort was the development of techniques for the ideal radiometric calculations required for the Halogen Occultation Experiment (HALOE) data reduction. The computer code for these calculations must be extremely complex and fast. A scheme for meeting these requirements was defined and the algorithms needed form implementation are currently under development. A third area of work included consulting on the implementation of the Emissivity Growth Approximation (EGA) method of absorption calculation into a HALOE broadband radiometer channel retrieval algorithm.

Supercomputer requirements for selected disciplines important to aerospace

NASA Technical Reports Server (NTRS)

Peterson, Victor L.; Kim, John; Holst, Terry L.; Deiwert, George S.; Cooper, David M.; Watson, Andrew B.; Bailey, F. Ron

1989-01-01

Speed and memory requirements placed on supercomputers by five different disciplines important to aerospace are discussed and compared with the capabilities of various existing computers and those projected to be available before the end of this century. The disciplines chosen for consideration are turbulence physics, aerodynamics, aerothermodynamics, chemistry, and human vision modeling. Example results for problems illustrative of those currently being solved in each of the disciplines are presented and discussed. Limitations imposed on physical modeling and geometrical complexity by the need to obtain solutions in practical amounts of time are identified. Computational challenges for the future, for which either some or all of the current limitations are removed, are described. Meeting some of the challenges will require computer speeds in excess of exaflop/s (10 to the 18th flop/s) and memories in excess of petawords (10 to the 15th words).

Helping Parents Reduce Children's Television Viewing

ERIC Educational Resources Information Center

Jason, Leonard A.; Fries, Michael

2004-01-01

Parents and educators around the country are concerned about the amount of time children watch television. Part of this concern stems from the fact that a considerable amount of violence is regularly portrayed on television. In addition, those youngsters who watch an excessive amount of television have little time for developing other interests…

Report of the Plasma Physics and Environmental Perturbation Laboratory (PPEPL) working groups. Volume 1: Plasma probes, wakes, and sheaths working group

NASA Technical Reports Server (NTRS)

1974-01-01

It is shown in this report that comprehensive in-situ study of all aspects of the entire zone disturbance caused by a body in a flowing plasma resulted in a large number if requirements on the shuttle-PPEPL facility. A large amount of necessary in-situ observation can be obtained by adopting appropriate modes of performing the experiments. Requirements are indicated for worthwhile studies, of some aspects of the problems, which can be carried out effectively while imposing relatively few constraints on the early missions. Considerations for the desired growth and improvement of the PPEPL to facilitate more complete studies in later missions are also discussed. For Vol. 2, see N74-28170; for Vol# 3, see N74-28171.

Estimated water requirements for gold heap-leach operations

USGS Publications Warehouse

Bleiwas, Donald I.

2012-01-01

This report provides a perspective on the amount of water necessary for conventional gold heap-leach operations. Water is required for drilling and dust suppression during mining, for agglomeration and as leachate during ore processing, to support the workforce (requires water in potable form and for sanitation), for minesite reclamation, and to compensate for water lost to evaporation and leakage. Maintaining an adequate water balance is especially critical in areas where surface and groundwater are difficult to acquire because of unfavorable climatic conditions [arid conditions and (or) a high evaporation rate]; where there is competition with other uses, such as for agriculture, industry, and use by municipalities; and where compliance with regulatory requirements may restrict water usage. Estimating the water consumption of heap-leach operations requires an understanding of the heap-leach process itself. The task is fairly complex because, although they all share some common features, each gold heap-leach operation is unique. Also, estimating the water consumption requires a synthesis of several fields of science, including chemistry, ecology, geology, hydrology, and meteorology, as well as consideration of economic factors.

Determination of shielding requirements for mammography.

PubMed

Okunade, Akintunde Akangbe; Ademoroti, Olalekan Albert

2004-05-01

Shielding requirements for mammography when considerations are to be given to attenuation by compression paddle, breast tissue, grid and image receptor (intervening materials) has been investigated. By matching of the attenuation and hardening properties, comparisons are made between shielding afforded by breast tissue materials (water, Lucite and 50%-50% adipose-glandular tissue) and some materials considered for shielding diagnostic x-ray beams, namely lead, steel and gypsum wallboard. Results show that significant differences exist between the thickness required to produce equal attenuation and that required to produce equal hardening of a given incident beam. While attenuation equivalent thickness produces equal exposure, it does not produce equal hardening. For shielding purposes, equivalence in exposure reduction without equivalence in penetrating power of an emerging beam does not amount to equivalence in shielding affordable by two different materials. Presented are models and results of sample calculations of additional shielding requirements apart from that provided by intervening materials. The shielding requirements for the integrated beam emerging from intervening materials are different from those for the integrated beam emerging from materials (lead/steel/gypsum wallboard) with attenuation equivalent thicknesses of these intervening materials.

Critical review: Uncharted waters? The future of the electricity-water nexus.

PubMed

Sanders, Kelly T

2015-01-06

Electricity generation often requires large amounts of water, most notably for cooling thermoelectric power generators and moving hydroelectric turbines. This so-called "electricity-water nexus" has received increasing attention in recent years by governments, nongovernmental organizations, industry, and academics, especially in light of increasing water stress in many regions around the world. Although many analyses have attempted to project the future water requirements of electricity generation, projections vary considerably due to differences in temporal and spatial boundaries, modeling frameworks, and scenario definitions. This manuscript is intended to provide a critical review of recent publications that address the future water requirements of electricity production and define the factors that will moderate the water requirements of the electric grid moving forward to inform future research. The five variables identified include changes in (1) fuel consumption patterns, (2) cooling technology preferences, (3) environmental regulations, (4) ambient climate conditions, and (5) electric grid characteristics. These five factors are analyzed to provide guidance for future research related to the electricity-water nexus.

PCI: A PATRAN-NASTRAN model translator

NASA Technical Reports Server (NTRS)

Sheerer, T. J.

1990-01-01

The amount of programming required to develop a PATRAN-NASTRAN translator was surprisingly small. The approach taken produced a highly flexible translator comparable with the PATNAS translator and superior to the PATCOS translator. The coding required varied from around ten lines for a shell element to around thirty for a bar element, and the time required to add a feature to the program is typically less than an hour. The use of a lookup table for element names makes the translator also applicable to other versions of NASTRAN. The saving in time as a result of using PDA's Gateway utilities was considerable. During the writing of the program it became apparent that, with a somewhat more complex structure, it would be possible to extend the element data file to contain all data required to define the translation from PATRAN to NASTRAN by mapping of data between formats. Similar data files on property, material and grid formats would produce a completely universal translator from PATRAN to any FEA program, or indeed any CAE system.

Comparison of lossless compression techniques for prepress color images

NASA Astrophysics Data System (ADS)

Van Assche, Steven; Denecker, Koen N.; Philips, Wilfried R.; Lemahieu, Ignace L.

1998-12-01

In the pre-press industry color images have both a high spatial and a high color resolution. Such images require a considerable amount of storage space and impose long transmission times. Data compression is desired to reduce these storage and transmission problems. Because of the high quality requirements in the pre-press industry only lossless compression is acceptable. Most existing lossless compression schemes operate on gray-scale images. In this case the color components of color images must be compressed independently. However, higher compression ratios can be achieved by exploiting inter-color redundancies. In this paper we present a comparison of three state-of-the-art lossless compression techniques which exploit such color redundancies: IEP (Inter- color Error Prediction) and a KLT-based technique, which are both linear color decorrelation techniques, and Interframe CALIC, which uses a non-linear approach to color decorrelation. It is shown that these techniques are able to exploit color redundancies and that color decorrelation can be done effectively and efficiently. The linear color decorrelators provide a considerable coding gain (about 2 bpp) on some typical prepress images. The non-linear interframe CALIC predictor does not yield better results, but the full interframe CALIC technique does.

Widespread episodic thiamine deficiency in Northern Hemisphere wildlife

PubMed Central

Balk, Lennart; Hägerroth, Per-Åke; Gustavsson, Hanna; Sigg, Lisa; Åkerman, Gun; Ruiz Muñoz, Yolanda; Honeyfield, Dale C.; Tjärnlund, Ulla; Oliveira, Kenneth; Ström, Karin; McCormick, Stephen D.; Karlsson, Simon; Ström, Marika; van Manen, Mathijs; Berg, Anna-Lena; Halldórsson, Halldór P.; Strömquist, Jennie; Collier, Tracy K.; Börjeson, Hans; Mörner, Torsten; Hansson, Tomas

2016-01-01

Many wildlife populations are declining at rates higher than can be explained by known threats to biodiversity. Recently, thiamine (vitamin B1) deficiency has emerged as a possible contributing cause. Here, thiamine status was systematically investigated in three animal classes: bivalves, ray-finned fishes, and birds. Thiamine diphosphate is required as a cofactor in at least five life-sustaining enzymes that are required for basic cellular metabolism. Analysis of different phosphorylated forms of thiamine, as well as of activities and amount of holoenzyme and apoenzyme forms of thiamine-dependent enzymes, revealed episodically occurring thiamine deficiency in all three animal classes. These biochemical effects were also linked to secondary effects on growth, condition, liver size, blood chemistry and composition, histopathology, swimming behaviour and endurance, parasite infestation, and reproduction. It is unlikely that the thiamine deficiency is caused by impaired phosphorylation within the cells. Rather, the results point towards insufficient amounts of thiamine in the food. By investigating a large geographic area, by extending the focus from lethal to sublethal thiamine deficiency, and by linking biochemical alterations to secondary effects, we demonstrate that the problem of thiamine deficiency is considerably more widespread and severe than previously reported. PMID:27958327

Widespread episodic thiamine deficiency in Northern Hemisphere wildlife

USGS Publications Warehouse

Balk, Lennart; Hägerroth, Per-Åke; Gustavsson, Hanna; Sigg, Lisa; Akerman, Gun; Ruiz Muñoz, Yolanda; Honeyfield, Dale C.; Tjarnlund, Ulla; Oliveira, Kenneth; Strom, Karin; McCormick, Stephen D.; Karlsson, Simon; Strom, Marika; van Manen, Mathijs; Berg, Anna-Lena; Halldórsson, Halldór P.; Stromquist, Jennie; Collier, Tracy K.; Borjeson, Hans; Morner, Torsten; Hansson, Tomas

2016-01-01

Many wildlife populations are declining at rates higher than can be explained by known threats to biodiversity. Recently, thiamine (vitamin B1) deficiency has emerged as a possible contributing cause. Here, thiamine status was systematically investigated in three animal classes: bivalves, ray-finned fishes, and birds. Thiamine diphosphate is required as a cofactor in at least five life-sustaining enzymes that are required for basic cellular metabolism. Analysis of different phosphorylated forms of thiamine, as well as of activities and amount of holoenzyme and apoenzyme forms of thiamine-dependent enzymes, revealed episodically occurring thiamine deficiency in all three animal classes. These biochemical effects were also linked to secondary effects on growth, condition, liver size, blood chemistry and composition, histopathology, swimming behaviour and endurance, parasite infestation, and reproduction. It is unlikely that the thiamine deficiency is caused by impaired phosphorylation within the cells. Rather, the results point towards insufficient amounts of thiamine in the food. By investigating a large geographic area, by extending the focus from lethal to sublethal thiamine deficiency, and by linking biochemical alterations to secondary effects, we demonstrate that the problem of thiamine deficiency is considerably more widespread and severe than previously reported.

Linear positioning laser calibration setup of CNC machine tools

NASA Astrophysics Data System (ADS)

Sui, Xiulin; Yang, Congjing

2002-10-01

The linear positioning laser calibration setup of CNC machine tools is capable of executing machine tool laser calibraiotn and backlash compensation. Using this setup, hole locations on CNC machien tools will be correct and machien tool geometry will be evaluated and adjusted. Machien tool laser calibration and backlash compensation is a simple and straightforward process. First the setup is to 'find' the stroke limits of the axis. Then the laser head is then brought into correct alignment. Second is to move the machine axis to the other extreme, the laser head is now aligned, using rotation and elevation adjustments. Finally the machine is moved to the start position and final alignment is verified. The stroke of the machine, and the machine compensation interval dictate the amount of data required for each axis. These factors determine the amount of time required for a through compensation of the linear positioning accuracy. The Laser Calibrator System monitors the material temperature and the air density; this takes into consideration machine thermal growth and laser beam frequency. This linear positioning laser calibration setup can be used on CNC machine tools, CNC lathes, horizontal centers and vertical machining centers.

Widespread episodic thiamine deficiency in Northern Hemisphere wildlife

NASA Astrophysics Data System (ADS)

Balk, Lennart; Hägerroth, Per-Åke; Gustavsson, Hanna; Sigg, Lisa; Åkerman, Gun; Ruiz Muñoz, Yolanda; Honeyfield, Dale C.; Tjärnlund, Ulla; Oliveira, Kenneth; Ström, Karin; McCormick, Stephen D.; Karlsson, Simon; Ström, Marika; van Manen, Mathijs; Berg, Anna-Lena; Halldórsson, Halldór P.; Strömquist, Jennie; Collier, Tracy K.; Börjeson, Hans; Mörner, Torsten; Hansson, Tomas

2016-12-01

Many wildlife populations are declining at rates higher than can be explained by known threats to biodiversity. Recently, thiamine (vitamin B1) deficiency has emerged as a possible contributing cause. Here, thiamine status was systematically investigated in three animal classes: bivalves, ray-finned fishes, and birds. Thiamine diphosphate is required as a cofactor in at least five life-sustaining enzymes that are required for basic cellular metabolism. Analysis of different phosphorylated forms of thiamine, as well as of activities and amount of holoenzyme and apoenzyme forms of thiamine-dependent enzymes, revealed episodically occurring thiamine deficiency in all three animal classes. These biochemical effects were also linked to secondary effects on growth, condition, liver size, blood chemistry and composition, histopathology, swimming behaviour and endurance, parasite infestation, and reproduction. It is unlikely that the thiamine deficiency is caused by impaired phosphorylation within the cells. Rather, the results point towards insufficient amounts of thiamine in the food. By investigating a large geographic area, by extending the focus from lethal to sublethal thiamine deficiency, and by linking biochemical alterations to secondary effects, we demonstrate that the problem of thiamine deficiency is considerably more widespread and severe than previously reported.

Copper-containing plastocyanin used for electron transport by an oceanic diatom.

PubMed

Peers, Graham; Price, Neil M

2006-05-18

The supply of some essential metals to pelagic ecosystems is less than the demand, so many phytoplankton have slow rates of photosynthetic production and restricted growth. The types and amounts of metals required by phytoplankton depends on their evolutionary history and on their adaptations to metal availability, which varies widely among ocean habitats. Diatoms, for example, need considerably less iron (Fe) to grow than chlorophyll-b-containing taxa, and the oceanic species demand roughly one-tenth the amount of coastal strains. Like Fe, copper (Cu) is scarce in the open sea, but notably higher concentrations of it are required for the growth of oceanic than of coastal isolates. Here we report that the greater Cu requirement in an oceanic diatom, Thalassiosira oceanica, is entirely due to a single Cu-containing protein, plastocyanin, which--until now--was only known to exist in organisms with chlorophyll b and cyanobacteria. Algae containing chlorophyll c, including the closely related coastal species T. weissflogii, are thought to lack plastocyanin and contain a functionally equivalent Fe-containing homologue, cytochrome c6 (ref. 9). Copper deficiency in T. oceanica inhibits electron transport regardless of Fe status, implying a constitutive role for plastocyanin in the light reactions of photosynthesis in this species. The results suggest that selection pressure imposed by Fe limitation has resulted in the use of a Cu protein for photosynthesis in an oceanic diatom. This biochemical switch reduces the need for Fe and increases the requirement for Cu, which is relatively more abundant in the open sea.

Percutaneous Embolization of Transhepatic Tracks for Biliary Intervention

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lyon, Stuart M.; Terhaar, Olaf; Given, Mark F.

2006-12-15

Significant pain can occur after removing transhepatic catheters from biliary access tracks, after percutaneous biliary drainage (PBD) or stenting. We undertook a randomized prospective study to ascertain whether track embolization decreases the amount of pain or analgesic requirement after PBD. Fifty consecutive patients (M:F, 22:28; age range:29-85 years; mean age: 66.3 years) undergoing PBD were randomized to receive track embolization or no track embolization after removal of biliary drainage catheters. A combination of Lipoidol and n-butyl cyanoacrylate were used to embolize transhepatic tracks using an 8F dilator. The patients who did not have track embolization performed had biliary drainage cathetersmore » removed over a guide wire. A visual analog scoring (VAS) system was used to grade pain associated with catheter removal, 24 h afterward. A required analgesic score (RAS) was devised to tabulate the analgesia required. No analgesia had a score of 0, oral or rectal nonopiate analgesics had a score of 1, oral opiates had a score of 2, and parenteral opiates had a score of 3. The average VAS and RAS for both groups were calculated and compared.Seven patients were excluded for various reasons, leaving 43 patients in the study group. Twenty-one patients comprised the embolization group and 22 patients comprised the nonembolization group. The mean biliary catheter dwell time was not significantly different (p > 0.05) between the embolization group and nonembolization (mean: 5.4 days vs 6.9 days, respectively). In the nonembolization group, the mean VAS was 3.4. Eight patients required parenteral opiates, three patients required oral opiates, and five patients required oral or rectal analgesics, yielding a mean RAS of 1.6. In the embolization group, the mean VAS was 0.9. No patient required parenteral opiates, six patients required oral opiates, and two patients had oral analgesia. The average RAS was 0.6. Both the VAS and the RAS were significantly lower in the embolization group compared with the nonembolization group (p < 0.0023 and p < 0.002, respectively). No complications were seen related to track embolization. Percutaneous track embolization after removal of biliary drainage catheters decreases patient's perception of pain and decreases the amount of required analgesia. In particular, the amount of opiate analgesia required is considerably less.« less

17 CFR 229.912 - (Item 912) Source and amount of funds and transactional expenses.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., accounting and appraisal fees, solicitation expenses and printing costs. Identify the persons responsible for... sources of capital to finance such amount. (c) If all or any part of the consideration to be used by the... partnership, state the amount to be provided by each partnership and the sources of capital to finance such...

Radiolytic Synthesis of Pt-Particle/ABS Catalysts for H₂O₂ Decomposition in Contact Lens Cleaning.

PubMed

Ohkubo, Yuji; Aoki, Tomonori; Seino, Satoshi; Mori, Osamu; Ito, Issaku; Endo, Katsuyoshi; Yamamura, Kazuya

2017-08-23

A container used in contact lens cleaning requires a Pt plating weight of 1.5 mg for H₂O₂ decomposition although Pt is an expensive material. Techniques that decrease the amount of Pt are therefore needed. In this study, Pt nanoparticles instead of Pt plating film were supported on a substrate of acrylonitrile-butadiene-styrene copolymer (ABS). This was achieved by the reduction of Pt ions in an aqueous solution containing the ABS substrate using high-energy electron-beam irradiation. Pt nanoparticles supported on the ABS substrate (Pt-particle/ABS) had a size of 4-10 nm. The amount of Pt required for Pt-particle/ABS was 250 times less than that required for an ABS substrate covered with Pt plating film (Pt-film/ABS). The catalytic activity for H₂O₂ decomposition was estimated by measuring the residual H₂O₂ concentration after immersing the catalyst for 360 min. The Pt-particle/ABS catalyst had a considerably higher specific catalytic activity for H₂O₂ decomposition than the Pt-film/ABS catalyst. In addition, sterilization performance was estimated from the initial rate of H₂O₂ decomposition over 60 min. The Pt-particle/ABS catalyst demonstrated a better sterilization performance than the Pt-film/ABS catalyst. The difference between Pt-particle/ABS and Pt-film/ABS was shown to reflect the size of the O₂ bubbles formed during H₂O₂ decomposition.

Kinetic Monte Carlo Simulations of Diffusion in Environmental Barrier Coating Materials

NASA Technical Reports Server (NTRS)

Good, Brian

2017-01-01

Ceramic Matrix Components (CMC) components for use in turbine engines offer a number of advantages compared with current practice. However, such components are subject to degradation through a variety of mechanisms. In particular, in the hot environment inside a turbine in operation a considerable amount of water vapor is present, and this can lead to corrosion and recession. Environmental Barrier Coating (EBC) systems that limit the amount of oxygen and water reaching the component are required to reduce this degradation and extend component life. A number of silicate-based materials are under consideration for use in such coating systems, including Yttterbium and Yttrium di- and monosilicates. In this work, we present results of kinetic Monte Carlo computer simulations of oxygen diffusion in Yttrium disilicate, and compare with previous work on Yttterbium disilicate. Coatings may also exhibit cracking, and the cracks can provide a direct path for oxygen to reach the component. There is typically a bond coat between the coating and component surface, but the bond coat material is generally chosen for properties other than low oxygen diffusivity. Nevertheless, the degree to which the bond coat can inhibit oxygen diffusion is of interest, as it may form the final defense against oxygen impingement on the component. We have therefore performed similar simulations of oxygen diffusion through HfSiO4, a proposed bond coat material.

Napoleon Bonaparte's exposure to arsenic during 1816.

PubMed

Leslie, A C; Smith, H

1978-12-11

Analysis of hair from Napoleon showed that he was exposed to considerable amounts of arsenic during 1816. The distribution pattern of the arsenic in the hair is similar to that found after the daily ingestion of excessive amounts of arsenic.

Seismic vulnerability analysis of bridges in mountainous states.

DOT National Transportation Integrated Search

2013-09-01

Depending on the location, highway bridges can often support considerable amounts of traffic. Due to the limitations on current earthquake forecasting techniques, a normal amount of traffic will also typically remain on a bridge when an earthquake oc...

Pattern recognition of native plant communities: Manitou Colorado test site

NASA Technical Reports Server (NTRS)

Driscoll, R. S.

1972-01-01

Optimum channel selection among 12 channels of multispectral scanner imagery identified six as providing the best information about 11 vegetation classes and two nonvegetation classes at the Manitou Experimental Forest. Intensive preprocessing of the scanner signals was required to eliminate a serious scan angle effect. Final processing of the normalized data provided acceptable recognition results of generalized plant community types. Serious errors occurred with attempts to classify specific community types within upland grassland areas. The consideration of the convex mixtures concept (effects of amounts of live plant cover, exposed soil, and plant litter cover on apparent scene radiances) significantly improved the classification of some of the grassland classes.

In situ methods for Li-ion battery research: A review of recent developments

NASA Astrophysics Data System (ADS)

Harks, P. P. R. M. L.; Mulder, F. M.; Notten, P. H. L.

2015-08-01

A considerable amount of research is being directed towards improving lithium-ion batteries in order to meet today's market demands. In particular in situ investigations of Li-ion batteries have proven extremely insightful, but require the electrochemical cell to be fully compatible with the conditions of the testing method and are therefore often challenging to execute. Advantageously, in the past few years significant progress has been made with new, more advanced, in situ techniques. Herein, a comprehensive overview of in situ methods for studying Li-ion batteries is given, with the emphasis on new developments and reported experimental highlights.

Capillary electrophoresis: Biotechnology for separation of DNA and chromosomes

NASA Technical Reports Server (NTRS)

Williams, George O., Jr.

1994-01-01

Electrophoresis has been used for the separation of particles, ions, and molecules for a number of years. The technology for separation and detection of the results has many applications in the life sciences. One of the major goals of the scientific community is to separate DNA molecules and intact chromosomes based upon their different lengths or number of base pairs. This may be achieved by using some of the commercially available and widely used methods, but these processes require a considerable amount of time. The challenge is to achieve separation of intact chromosomes in a short time, preferably in a matter of minutes.

The effect of boron and gadolinium burnable poisons on the hot-to-cold reactivity swing of a pressurized water reactor assembly

DOE Office of Scientific and Technical Information (OSTI.GOV)

Galperin, A.; Segev, M.; Radkowsky, A.

1986-11-01

Control requirements for advanced pressurized water reactor designs must be met with heavy loadings of burnable poison rods, the required reactivity hold-down typically amounting to 30% or more in a poisoned subassembly. Two apparent choices for poisons are natural boron rods and natural gadolinium rods. Studied and analyzed is the effect of these two poisons on the hot-to-cold reactivity upswing. Compared with an upswing of 2.9% in a nonpoisoned assembly, the upswing in the gadolinium-poisoned assembly is 3.0%, and the upswing in the boron-poisoned assembly is 8.8%. Thus the hot-to-cold control penalty is almost nil for the choice of gadoliniummore » and is considerable for the choice of boron.« less

The EVA space suit development in Europe.

PubMed

Skoog, A I

1994-01-01

The progress of the European EVA space suit predevelopment activities has resulted in an improved technical reference concept, which will form the basis for a start of the Phase C/D development work in 1992. Technology development work over the last 2 years has resulted in a considerable amount of test data and a better understanding of the characteristics and behaviour of individual parts of the space suit system, in particular in the areas of suits' mobility and life support functions. This information has enabled a consolidation of certain design features on the one hand, but also led to the challenging of some of the design solutions on the other hand. While working towards an improved situation with respect to the main design drivers mass and cost, the technical concept has been improved with respect to functional safety and ease of handling, taking the evolving Hermes spaceplane requirements into consideration. Necessary hardware and functional redundancies have been implemented taking the operational scenario with Hermes and Columbus servicing into consideration. This paper presents the latest design status of the European EVA space suit concept, with particular emphasis on crew safety, comfort and productivity, in the frame of the predevelopment work for the European Space Agency.

5 CFR 841.602 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... the Individual Retirement Record under consideration. Unexpended balance means the unrefunded amount... of this chapter; (b) Amounts deposited by an employee for periods of service (including military... service. Year of the computation means the calendar year when the unexpended balance is being computed. ...

The role of impulse parameters in force variability

NASA Technical Reports Server (NTRS)

Carlton, L. G.; Newell, K. M.

1986-01-01

One of the principle limitations of the human motor system is the ability to produce consistent motor responses. When asked to repeatedly make the same movement, performance outcomes are characterized by a considerable amount of variability. This occurs whether variability is expressed in terms of kinetics or kinematics. Variability in performance is of considerable importance because for tasks requiring accuracy it is a critical variable in determining the skill of the performer. What has long been sought is a description of the parameter or parameters that determine the degree of variability. Two general experimental protocals were used. One protocal is to use dynamic actions and record variability in kinematic parameters such as spatial or temporal error. A second strategy was to use isometric actions and record kinetic variables such as peak force produced. What might be the important force related factors affecting variability is examined and an experimental approach to examine the influence of each of these variables is provided.

Standpoints of traditional Persian physicians on geriatric nutrition.

PubMed

Emami, Morteza; Nazarinia, Mohammad Ali; Rezaeizadeh, Hussein; Zarshenas, Mohammad M

2014-10-01

The present article aimed to compile information on the nutritional management for geriatric people. Popular textbooks of Persian medicine from 10th to 18th century were studied to derive relative viewpoints and considerations. The temperament, which is defined as the combination of 4 main elements (fire, air, water, and soil) and 4 humors made subsequently (black bile, yellow bile, phlegm, and blood), changes during age periods. Imbalance in proportional amounts of humors in elderly should be corrected with food and medicaments having opposite nature to the current condition. Traditional foods included mostly well-cooked soups, pottages, and porridges containing fresh sheep or chicken meat. Mono-ingredient foods were also administered according to their medical properties. Nutritional recommendations were also concerned with geriatrics' physiological conditions such as constipation, sleep disorders, and memory deficits. Many of traditional geriatric nutritional requirements are relevant in the present day. However, there are still notes that may be beneficial for consideration. © The Author(s) 2014.

Interstellar Dust Models Consistent with Extinction, Emission, and Abundance Constraints

NASA Technical Reports Server (NTRS)

Zubko, Viktor; Dwek, Eli; Arendt, Richard G.

2004-01-01

We present new interstellar dust models which have been derived by simultaneously fitting the far ultraviolet to near infrared extinction, the diffuse infrared emission, and, unlike previous models, the elemental abundances in dust for the diffuse interstellar medium. We found that dust models consisting of a mixture of spherical graphite and silicate grains, polycyclic aromatic hydrocarbon (PAH) molecules, in addition to porous composite particles containing silicate, organic refractory, and water ice, provide an improved .t to the UV-to-infrared extinction and infrared emission measurements, while consuming the amounts of elements well within the uncertainties of adopted interstellar abundances, including B star abundances. These models are a signi.cant improvement over the recent Li & Draine (2001, ApJ, 554, 778) model which requires an excessive amount of silicon to be locked up in dust: 48 ppm (atoms per million of H atoms), considerably more than the solar abundance of 34 ppm or the B star abundance of 19 ppm.

Repayment policy for multiple loans

PubMed Central

2017-01-01

The Repayment Policy for Multiple Loans is about a given set of loans and a monthly incoming cash flow: what is the best way to allocate the monthly income to repay such loans? In this article, we close the almost 20-year-old open question about how to model the repayment policy for multiple loans problem together with its computational complexity. Thus, we propose a mixed integer linear programming model that establishes an optimal repayment schedule by minimizing the total amount of cash required to repay the loans. We prove that the most employed repayment strategies, such as the highest interest debt and the debt snowball methods, are not optimal. Experimental results on simulated cases based on real data show that our methodology obtains on average more than 4% of savings, that is, the debtor pays approximately 4% less to the bank or loaner, which is a considerable amount in finances. In certain cases, the debtor can save up to 40%. PMID:28430786

Atmospheric considerations regarding the impact of heat dissipation from a nuclear energy center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rotty, R.M.; Bauman, H.; Bennett, L.L.

1976-05-01

Potential changes in climate resulting from a large nuclear energy center are discussed. On a global scale, no noticeable changes are likely, but on both a regional and a local scale, changes can be expected. Depending on the cooling system employed, the amount of fog may increase, the amount and distribution of precipitation will change, and the frequency or location of severe storms may change. Very large heat releases over small surface areas can result in greater atmospheric instability; a large number of closely spaced natural-draft cooling towers have this disadvantage. On the other hand, employment of natural-draft towers makesmore » an increase in the occurrence of ground fog unlikely. The analysis suggests that the cooling towers for a large nuclear energy center should be located in clusters of four with at least 2.5-mile spacing between the clusters. This is equivalent to the requirement of one acre of land surface per each two megawatts of heat being rejected.« less

The effectiveness of wastewater treatment in nuclear medicine: Performance data and radioecological considerations.

PubMed

Sudbrock, F; Schomäcker, K; Drzezga, A

2017-01-01

For planned and ongoing storage of liquid radioactive waste in a designated plant for a nuclear medicine therapy ward (decontamination system/decay system), detailed knowledge of basic parameters such as the amount of radioactivity and the necessary decay time in the plant is required. The design of the plant at the Department of Nuclear Medicine of the University of Cologne, built in 2001, was based on assumptions about the individual discharge of activity from patients, which we can now retrospectively validate. The decontamination factor of the plant is at present in the order of 10 -9 for 131 I. The annual discharges have been continuously reduced over the period of operation and are now in the region of a few kilobecquerels. This work emphasizes the high efficacy of the decontamination plant to reduce the amount of radioactivity released from the nuclear medicine ward into the environment to almost negligible levels. Copyright © 2016 Elsevier Ltd. All rights reserved.

Protein import and oxidative folding in the mitochondrial intermembrane space of intact mammalian cells

PubMed Central

Fischer, Manuel; Horn, Sebastian; Belkacemi, Anouar; Kojer, Kerstin; Petrungaro, Carmelina; Habich, Markus; Ali, Muna; Küttner, Victoria; Bien, Melanie; Kauff, Frank; Dengjel, Jörn; Herrmann, Johannes M.; Riemer, Jan

2013-01-01

Oxidation of cysteine residues to disulfides drives import of many proteins into the intermembrane space of mitochondria. Recent studies in yeast unraveled the basic principles of mitochondrial protein oxidation, but the kinetics under physiological conditions is unknown. We developed assays to follow protein oxidation in living mammalian cells, which reveal that import and oxidative folding of proteins are kinetically and functionally coupled and depend on the oxidoreductase Mia40, the sulfhydryl oxidase augmenter of liver regeneration (ALR), and the intracellular glutathione pool. Kinetics of substrate oxidation depends on the amount of Mia40 and requires tightly balanced amounts of ALR. Mia40-dependent import of Cox19 in human cells depends on the inner membrane potential. Our observations reveal considerable differences in the velocities of mitochondrial import pathways: whereas preproteins with bipartite targeting sequences are imported within seconds, substrates of Mia40 remain in the cytosol for several minutes and apparently escape premature degradation and oxidation. PMID:23676665

Consideration of Collision "Consequence" in Satellite Conjunction Assessment and Risk Analysis

NASA Technical Reports Server (NTRS)

Hejduk, M.; Laporte, F.; Moury, M.; Newman, L.; Shepperd, R.

2017-01-01

Classic risk management theory requires the assessment of both likelihood and consequence of deleterious events. Satellite conjunction risk assessment has produced a highly-developed theory for assessing collision likelihood but holds a completely static solution for collision consequence, treating all potential collisions as essentially equally worrisome. This may be true for the survival of the protected asset, but the amount of debris produced by the potential collision, and therefore the degree to which the orbital corridor may be compromised, can vary greatly among satellite conjunctions. This study leverages present work on satellite collision modeling to develop a method by which it can be estimated, to a particular confidence level, whether a particular collision is likely to produce a relatively large or relatively small amount of resultant debris and how this datum might alter conjunction remediation decisions. The more general question of orbital corridor protection is also addressed, and a preliminary framework presented by which both collision likelihood and consequence can be jointly considered in the risk assessment process.

In orbit adiabatic demagnetization refrigeration for bolometric and microcalorimetric detectors

NASA Astrophysics Data System (ADS)

Hepburn, I. D.; Ade, P. A. R.; Davenport, I.; Smith, A.; Sumner, T. J.

1992-12-01

The new generation of photon detectors for satellite based mm/submm and X-ray astronomical observations require cooling to temperatures in the range 60 to 300 mK. At present Adiabatic Demagnetization Refrigeration (ADR) is the best proposed technique for producing these temperatures in orbit due to its inherent simplicity and gravity independent operation. For the efficient utilization of an ADR it is important to realize long operational times at base temperature with short recycle times. These criteria are dependent on several parameters; the required operating temperature, the cryogen bath temperature, the amount of heat leakage to the paramagnetic salt, the volume and type of salt and the maximum obtainable magnetic field. For space application these parameters are restricted by the limitations imposed on the physical size, the mass, the available electrical power and the cooling power available. The design considerations required in order to match these parameters are described and test data from a working laboratory system is presented.

Exercise based transportation reduces oil consumption and carbon emissions

NASA Astrophysics Data System (ADS)

Higgins, P. A.

2004-12-01

Current abuse and misrepresentation of science hinders society's ability to address climate change. Scientific abuse results, in part, from a widespread perception that curbing emissions will require substantial economic, political, or personal sacrifice. Here I provide one example to illustrate that this perception is false. Simply walking or biking the amount recommended for a healthy lifestyle could reduce carbon emissions up to 11 percent if the distances traveled were substituted for car travel. This level of exercise is also sufficient to eliminate obese and overweight conditions in a few years without draconian diet plans. A reduction in carbon dioxide emissions of roughly 35 percent is possible if the revenue saved through decreased health care spending on obesity is redirected toward carbon abatement. This emissions reduction far exceeds that required by the Kyoto Protocol at no net cost. Finally, widespread substitution of driving with distances traveled during recommended daily exercise would considerably ease societal dependence on oil, which leads not only to climate change but also to air pollution, political and economic instability and habitat degradation. Thus, exercise based transportation constitutes a potentially favorable alternative to the energy and diet plans that are currently under consideration and a substantial step toward dealing with the threat of climate change.

Modular thermal analyzer routine, volume 1

NASA Technical Reports Server (NTRS)

Oren, J. A.; Phillips, M. A.; Williams, D. R.

1972-01-01

The Modular Thermal Analyzer Routine (MOTAR) is a general thermal analysis routine with strong capabilities for performing thermal analysis of systems containing flowing fluids, fluid system controls (valves, heat exchangers, etc.), life support systems, and thermal radiation situations. Its modular organization permits the analysis of a very wide range of thermal problems for simple problems containing a few conduction nodes to those containing complicated flow and radiation analysis with each problem type being analyzed with peak computational efficiency and maximum ease of use. The organization and programming methods applied to MOTAR achieved a high degree of computer utilization efficiency in terms of computer execution time and storage space required for a given problem. The computer time required to perform a given problem on MOTAR is approximately 40 to 50 percent that required for the currently existing widely used routines. The computer storage requirement for MOTAR is approximately 25 percent more than the most commonly used routines for the most simple problems but the data storage techniques for the more complicated options should save a considerable amount of space.

Estimating tobacco consumption in remote Aboriginal communities using retail sales data: some challenges and opportunities.

PubMed

MacLaren, David; Redman-MacLaren, Michelle; Clough, Alan

2010-07-01

To describe and discuss challenges and opportunities encountered when estimating tobacco consumption in six remote Aboriginal communities using tobacco sales data from retail outlets. We consider tobacco sales data collected from retail outlets selling tobacco to six Aboriginal communities in two similar but separate studies. Despite challenges--including: not all outlets provided data; data not uniform across outlets (sales and invoice data); change in format of data; personnel change or management restructures; and anomalies in data and changes in community populations--tobacco consumption was estimated and returned through project newsletters and community feedback sessions. Amounts of tobacco sold were returned using graphs in newsletters and pictures of items common to the community in community feedback sessions. Despite inherent limitations of estimating tobacco consumption using tobacco sales data, returning the amount of tobacco sold to communities provided an opportunity to discuss tobacco consumption and provide a focal point for individual and community action. Using this method, however, may require large and sustained changes be observed over time to evaluate whether initiatives to reduce tobacco consumption have been effective. Estimating tobacco consumption in remote Aboriginal communities using tobacco sales data from retail outlets requires careful consideration of many logistical, social, cultural and geographic challenges.

An Instructional Satellite System for the United States: Preliminary Considerations.

ERIC Educational Resources Information Center

DuMolin, James R.; Morgan, Robert P.

Based on educational, social, political, and other considerations, an instructional satellite system, AVSIN (Ausio-Visual Satellite Instruction), is hypothesized which represents one possible organizational and administrative arrangement for delivering large amounts of quality software to schools and learning centers. The AVSIN system is conceived…

The solar UV exposure time required for vitamin D3 synthesis in the human body estimated by numerical simulation and observation in Japan

NASA Astrophysics Data System (ADS)

Nakajima, Hideaki; Miyauchi, Masaatsu; Hirai, Chizuko

2013-04-01

After the discovery of Antarctic ozone hole, the negative effect of exposure of human body to harmful solar ultraviolet (UV) radiation is widely known. However, there is positive effect of exposure to UV radiation, i.e., vitamin D synthesis. Although the importance of solar UV radiation for vitamin D3 synthesis in the human body is well known, the solar exposure time required to prevent vitamin D deficiency has not been well determined. This study attempted to identify the time of solar exposure required for vitamin D3 synthesis in the body by season, time of day, and geographic location (Sapporo, Tsukuba, and Naha, in Japan) using both numerical simulations and observations. According to the numerical simulation for Tsukuba at noon in July under a cloudless sky, 2.3 min of solar exposure are required to produce 5.5 μg vitamin D3 per 600 cm2 skin. This quantity of vitamin D represents the recommended intake for an adult by the Ministry of Health, Labour and Welfare, and the 2010 Japanese Dietary Reference Intakes (DRIs). In contrast, it took 49.5 min to produce the same amount of vitamin D3 at Sapporo in the northern part of Japan in December, at noon under a cloudless sky. The necessary exposure time varied considerably with the time of the day. For Tsukuba at noon in December, 14.5 min were required, but at 09:00 68.7 min were required and at 15:00 175.8 min were required for the same meteorological conditions. Naha receives high levels of UV radiation allowing vitamin D3 synthesis almost throughout the year. According to our results, we are further developing an index to quantify the necessary time of UV radiation exposure to produce required amount of vitamin D3 from a UV radiation data.

Need total sulfur content? Use chemiluminescence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kubala, S.W.; Campbell, D.N.; DiSanzo, F.P.

Regulations issued by the United States Environmental Protection Agency require petroleum refineries to reduce or control the amount of total sulfur present in their refined products. These legislative requirements have led many refineries to search for online instrumentation that can produce accurate and repeatable total sulfur measurements within allowed levels. Several analytical methods currently exist to measure total sulfur content. They include X-ray fluorescence (XRF), microcoulometry, lead acetate tape, and pyrofluorescence techniques. Sulfur-specific chemiluminescence detection (SSCD) has recently received much attention due to its linearity, selectivity, sensitivity, and equimolar response. However, its use has been largely confined to the areamore » of gas chromatography. This article focuses on the special design considerations and analytical utility of an SSCD system developed to determine total sulfur content in gasoline. The system exhibits excellent linearity and selectivity, the ability to detect low minimum levels, and an equimolar response to various sulfur compounds. 2 figs., 2 tabs.« less

Multiplexed analysis of protein-ligand interactions by fluorescence anisotropy in a microfluidic platform.

PubMed

Cheow, Lih Feng; Viswanathan, Ramya; Chin, Chee-Sing; Jennifer, Nancy; Jones, Robert C; Guccione, Ernesto; Quake, Stephen R; Burkholder, William F

2014-10-07

Homogeneous assay platforms for measuring protein-ligand interactions are highly valued due to their potential for high-throughput screening. However, the implementation of these multiplexed assays in conventional microplate formats is considerably expensive due to the large amounts of reagents required and the need for automation. We implemented a homogeneous fluorescence anisotropy-based binding assay in an automated microfluidic chip to simultaneously interrogate >2300 pairwise interactions. We demonstrated the utility of this platform in determining the binding affinities between chromatin-regulatory proteins and different post-translationally modified histone peptides. The microfluidic chip assay produces comparable results to conventional microtiter plate assays, yet requires 2 orders of magnitude less sample and an order of magnitude fewer pipetting steps. This approach enables one to use small samples for medium-scale screening and could ease the bottleneck of large-scale protein purification.

The Effect of Fiber Architecture on Matrix Cracking in Sic/sic Cmc's

NASA Technical Reports Server (NTRS)

Morscher, Gregory N.

2005-01-01

Applications incorporating silicon carbide fiber reinforced silicon carbide matrix composites (CMC's) will require a wide range of fiber architectures in order to fabricate complex shape. The stress-strain response of a given SiC/SiC system for different architectures and orientations will be required in order to design and effectively life-model future components. The mechanism for non-linear stress-strain behavior in CMC's is the formation and propagation of bridged-matrix cracks throughout the composite. A considerable amount of understanding has been achieved for the stress-dependent matrix cracking behavior of SiC fiber reinforced SiC matrix systems containing melt-infiltrated Si. This presentation will outline the effect of 2D and 3D architectures and orientation on stress-dependent matrix-cracking and how this information can be used to model material behavior and serve as the starting point foe mechanistic-based life-models.

Heterogeneous computing architecture for fast detection of SNP-SNP interactions.

PubMed

Sluga, Davor; Curk, Tomaz; Zupan, Blaz; Lotric, Uros

2014-06-25

The extent of data in a typical genome-wide association study (GWAS) poses considerable computational challenges to software tools for gene-gene interaction discovery. Exhaustive evaluation of all interactions among hundreds of thousands to millions of single nucleotide polymorphisms (SNPs) may require weeks or even months of computation. Massively parallel hardware within a modern Graphic Processing Unit (GPU) and Many Integrated Core (MIC) coprocessors can shorten the run time considerably. While the utility of GPU-based implementations in bioinformatics has been well studied, MIC architecture has been introduced only recently and may provide a number of comparative advantages that have yet to be explored and tested. We have developed a heterogeneous, GPU and Intel MIC-accelerated software module for SNP-SNP interaction discovery to replace the previously single-threaded computational core in the interactive web-based data exploration program SNPsyn. We report on differences between these two modern massively parallel architectures and their software environments. Their utility resulted in an order of magnitude shorter execution times when compared to the single-threaded CPU implementation. GPU implementation on a single Nvidia Tesla K20 runs twice as fast as that for the MIC architecture-based Xeon Phi P5110 coprocessor, but also requires considerably more programming effort. General purpose GPUs are a mature platform with large amounts of computing power capable of tackling inherently parallel problems, but can prove demanding for the programmer. On the other hand the new MIC architecture, albeit lacking in performance reduces the programming effort and makes it up with a more general architecture suitable for a wider range of problems.

Heterogeneous computing architecture for fast detection of SNP-SNP interactions

PubMed Central

2014-01-01

Background The extent of data in a typical genome-wide association study (GWAS) poses considerable computational challenges to software tools for gene-gene interaction discovery. Exhaustive evaluation of all interactions among hundreds of thousands to millions of single nucleotide polymorphisms (SNPs) may require weeks or even months of computation. Massively parallel hardware within a modern Graphic Processing Unit (GPU) and Many Integrated Core (MIC) coprocessors can shorten the run time considerably. While the utility of GPU-based implementations in bioinformatics has been well studied, MIC architecture has been introduced only recently and may provide a number of comparative advantages that have yet to be explored and tested. Results We have developed a heterogeneous, GPU and Intel MIC-accelerated software module for SNP-SNP interaction discovery to replace the previously single-threaded computational core in the interactive web-based data exploration program SNPsyn. We report on differences between these two modern massively parallel architectures and their software environments. Their utility resulted in an order of magnitude shorter execution times when compared to the single-threaded CPU implementation. GPU implementation on a single Nvidia Tesla K20 runs twice as fast as that for the MIC architecture-based Xeon Phi P5110 coprocessor, but also requires considerably more programming effort. Conclusions General purpose GPUs are a mature platform with large amounts of computing power capable of tackling inherently parallel problems, but can prove demanding for the programmer. On the other hand the new MIC architecture, albeit lacking in performance reduces the programming effort and makes it up with a more general architecture suitable for a wider range of problems. PMID:24964802

Aerodynamic characteristics of some lifting reentry concepts applicable to transatmospheric vehicle design studies

NASA Technical Reports Server (NTRS)

Spearman, M. L.

1984-01-01

The aerodynamic characteristics of some lifting reentry concepts are examined with a view to the applicability of such concepts to the design of possible transatmospheric vehicles (TAV). A considerable amount of research has been done in past years with vehicle concepts suitable for manned atmospheric-entry, atmospheric flight, and landing. Some of the features of these concepts that permit flight in or out of the atmosphere with maneuver capability should be useful in the mission requirements of TAV's. The concepts illustrated include some hypersonic-body shapes with and without variable geometry surfaces, and a blunt lifting-body configuration. The merits of these concepts relative to the aerodynamic behavior of a TAV are discussed.

Space shuttle data handling and communications considerations.

NASA Technical Reports Server (NTRS)

Stoker, C. J.; Minor, R. G.

1971-01-01

Operational and development flight instrumentation, data handling subsystems and communication requirements of the space shuttle orbiter are discussed. Emphasis is made on data gathering methods, crew display data, computer processing, recording, and telemetry by means of a digital data bus. Also considered are overall communication conceptual system aspects and design features allowing a proper specification of telemetry encoders and instrumentation recorders. An adaptive bit rate concept is proposed to handle the telemetry bit rates which vary with the amount of operational and experimental data to be transmitted. A split-phase encoding technique is proposed for telemetry to cope with the excessive bit jitter and low bit transition density which may affect television performance.

Skeletal and dental considerations in orthodontic treatment mechanics: a contemporary view.

PubMed

Nanda, Ravindra; Upadhyay, Madhur

2013-10-01

Orthodontics has undergone a paradigm shift in the last 40 years. There have been both technical and philosophical changes ushered by the development of new appliances, techniques, and by the explosion in the amount of research being conducted all around the world. However, the application of any new concept requires a firm understanding of the fundamentals of orthodontics. This paper presents a broad review of some fundamental concepts of treatment mechanics that enable us to bring about skeletal and dental correction of the presenting malocclusion. The basic concepts of facemask therapy, mechanics, and biology of tooth movement will be discussed with an insight into the challenges facing us in the future.

Demand Forecasting and Revenue Requirements, with Implications for Consideration in British Columbia,

DTIC Science & Technology

1983-05-01

future financing obligations will be 782 largely determined by the conditions of the financial 783 markets , the amount of construction activity that is...L 4 w- MM t 14 * 0 00 M00 0 0 0nU M4 C? 0C 4 4 ’C) * 0 3 0 0N% AI 0 % M 41 C 0 MNl -4 N4 -4-4 0 6. n ad 4 LI L 1 4p % N 61-4 I 01 -54- t: 1% r.a -4 "E...34Residential Demand for Electricity," Quarterly Review of Economics and Business , Vol. 11, Spring 1971, pp. 7-22. Yang, Yung Y., "Temporal Stability

Measuring software development characteristics in the local environment. [considering project requirements for spacecraft control

NASA Technical Reports Server (NTRS)

Basili, V. R.; Zelkowitz, M. V.

1978-01-01

In a brief evaluation of software-related considerations, it is found that suitable approaches for software development depend to a large degree on the characteristics of the particular project involved. An analysis is conducted of development problems in an environment in which ground support software is produced for spacecraft control. The amount of work involved is in the range from 6 to 10 man-years. Attention is given to a general project summary, a programmer/analyst survey, a component summary, a component status report, a resource summary, a change report, a computer program run analysis, aspects of data collection on a smaller scale, progress forecasting, problems of overhead, and error analysis.

Survey of power tower technology

NASA Astrophysics Data System (ADS)

Hildebrandt, A. F.; Dasgupta, S.

1980-05-01

The history of the power tower programs is reviewed, and attention is given to the current state of heliostat, receiver, and storage design. Economic considerations are discussed, as are simulation studies and implications. Also dealt with are alternate applications for the power tower and some financing and energy aspects of solar electric conversion. It is noted that with a national commitment to solar energy, the power tower concept could generate 40 GW of electricity and double this amount in process heat by the year 2000. Calculations show an energy amplification factor of 20 for solar energy plants; that is, the ratio of the electric energy produced over the lifetime of a power plant to the thermal energy required to produce the plant.

A communication channel model of the software process

NASA Technical Reports Server (NTRS)

Tausworthe, R. C.

1988-01-01

Reported here is beginning research into a noisy communication channel analogy of software development process productivity, in order to establish quantifiable behavior and theoretical bounds. The analogy leads to a fundamental mathematical relationship between human productivity and the amount of information supplied by the developers, the capacity of the human channel for processing and transmitting information, the software product yield (object size), the work effort, requirements efficiency, tool and process efficiency, and programming environment advantage. Also derived is an upper bound to productivity that shows that software reuse is the only means than can lead to unbounded productivity growth; practical considerations of size and cost of reusable components may reduce this to a finite bound.

A communication channel model of the software process

NASA Technical Reports Server (NTRS)

Tausworthe, Robert C.

1988-01-01

Beginning research into a noisy communication channel analogy of software development process productivity, in order to establish quantifiable behavior and theoretical bounds is discussed. The analogy leads to a fundamental mathematical relationship between human productivity and the amount of information supplied by the developers, the capacity of the human channel for processing and transmitting information, the software product yield (object size) the work effort, requirements efficiency, tool and process efficiency, and programming environment advantage. An upper bound to productivity is derived that shows that software reuse is the only means that can lead to unbounded productivity growth; practical considerations of size and cost of reusable components may reduce this to a finite bound.

Analyzing the security of an existing computer system

NASA Technical Reports Server (NTRS)

Bishop, M.

1986-01-01

Most work concerning secure computer systems has dealt with the design, verification, and implementation of provably secure computer systems, or has explored ways of making existing computer systems more secure. The problem of locating security holes in existing systems has received considerably less attention; methods generally rely on thought experiments as a critical step in the procedure. The difficulty is that such experiments require that a large amount of information be available in a format that makes correlating the details of various programs straightforward. This paper describes a method of providing such a basis for the thought experiment by writing a special manual for parts of the operating system, system programs, and library subroutines.

46 CFR 309.6 - Adjustments for condition, equipment, and other considerations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of $50,000, an amount estimated by the Maritime Administration as the fair and reasonable value of... considerations. 309.6 Section 309.6 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS VALUES FOR WAR RISK INSURANCE § 309.6 Adjustments for condition, equipment, and other...

47 CFR 32.4200 - Long term debt and funded debt.

Code of Federal Regulations, 2010 CFR

2010-10-01

... applied to securities issued or assumed by the company, means the excess of the book or face amount of the... consideration received at their sale. (4) The face amount of debt reacquired prior to maturity that has not been... 32.4200 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES...

Alternate propellant program, phase 1

NASA Technical Reports Server (NTRS)

Anderson, F. A.; West, W. R.

1979-01-01

Candidate propellant systems for the shuttle booster solid rocket motor (SRM), which would eliminate, or greatly reduce, the amount of HCl produced in the exhaust of the shuttle SRM were investigated. Ammonium nitrate was selected for consideration as the main oxidizer, with ammonium perchlorate and the nitramine, cyclo-tetramethylene-tetranitramine as secondary oxidizers. The amount of ammonium perchlorate used was limited to an amount which would produce an exhaust containing no more than 3% HCl.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sorensen, L.B.

Studies were made of the total amount of uric acid in the human body and the turnover rate. Uric acid labeled with C/sup 14/ was used as a tracer. A comparison of the amount of uric acid turned over per day with the amount excreted in the urine made it clear that a considerable part of uric acid ie eliminated by some other route than through the kidney. Results are reported from studies on the extrarenal excretion of uric acid. (C.H.)

Sleep and Rest Requirements: Physiological Considerations

NASA Technical Reports Server (NTRS)

Neri, David F.; Rosekind, Mark R. (Technical Monitor)

1997-01-01

Sleep is a vital physiological need which must be met to insure optimal functioning. A single night of significantly shortened sleep negatively impacts performance, alertness, and mood. Restricted sleep studies have shown that even a relatively small amount of sleep loss over several consecutive days can be additive and result in a cumulative sleep debt with similar detrimental effects. Compounding the problem of sleep loss in the operational environment is the poor correlation between subjective reports of sleepiness and objective measures of physiological sleep need. Some of the factors determining how sleepy an individual is at a given point in time are: (1) individual characteristics (e.g., amount of prior sleep and wakefulness, circadian phase, age), (2) environmental conditions (e.g., noise, temperature, amount of social interaction), and (3) task variables (e.g., signal rate, workload). Although sleep need can be masked with medications, the only way to reduce it is with sleep itself. The timing of the sleep period can affect sleep duration and quality and thus its restorative strength. The data are clear that increasing sleep time results in improved alertness. This paper will briefly review the scientific findings on sleep need, the effects of sleep loss, napping strategies, and the implications of incorporating physiologically sound sleep and rest strategies into the operational aviation environment.

The Internet, The Hidden Web, and Useful Web Resources: ERIC, ERIC/CASS, & The Virtual Library.

ERIC Educational Resources Information Center

Kirkman, Chris; Frady, Allen; Walz, Garry R.

Counselors and educators face a constant struggle to keep abreast of the vast amounts of new information available, assessing this information, and continuing to gather even more information. Individual's information searching strategies often take considerable time and cause considerable frustration in getting the results wanted. While increasing…

The new employee: proper orientation and training go a long way toward job success.

PubMed

Ehrhardt, P

1999-01-01

Considerable money is spent to advertise, interview, and hire a new employee. Considerable amounts of time and energy should be used to train, orient, and encourage this employee. The longevity of employees in their jobs is often directly related to the nurturing of the employee through continuing education.

Prospective Teachers' Opinions Concerning Children's Rights

ERIC Educational Resources Information Center

Faiz, Melike; Kamer, Selman Tunay

2017-01-01

Consideration of the child as a social being and his/her not having the power of self-protection have propounded the significance of children's rights. Teachers are important to educate the individual. Prospective teachers who will be teachers of the future will have a considerable amount of presidency. Thus, the main objective of this research is…

Estimate of the Potential Amount of Low-Level Waste from the Fukushima Prefecture - 12370

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hill, Carolyn; Olson, Eric A.J.; Elmer, John

2012-07-01

The amount of waste generated by the cleanup of the Fukushima Prefecture (Fukushima-ken) following the releases from the Fukushima Daiichi nuclear power plant accident (March 2011) is dependent on many factors, including: - Contamination amounts; - Cleanup levels determined for the radioisotopes contaminating the area; - Future land use expectations and human exposure scenarios; - Groundwater contamination considerations; - Costs and availability of storage areas, and eventually disposal areas for the waste; and - Decontamination and volume reduction techniques and technologies used. For the purposes of estimating these waste volumes, Fukushima-ken is segregated into zones of similar contamination level andmore » expected future use. Techniques for selecting the appropriate cleanup methods for each area are shown in a decision tree format. This approach is broadly applied to the 20 km evacuation zone and the total amounts and types of waste are estimated; waste resulting from cleanup efforts outside of the evacuation zone is not considered. Some of the limits of future use and potential zones where residents must be excluded within the prefecture are also described. The size and design of the proposed intermediate storage facility is also discussed and the current situation, cleanup, waste handling, and waste storage issues in Japan are described. The method for estimating waste amounts outlined above illustrates the large amount of waste that could potentially be generated by remediation of the 20 km evacuation zone (619 km{sup 2} total) if the currently proposed cleanup goals are uniformly applied. The Japanese environment ministry estimated in early October that the 1 mSv/year exposure goal would make the government responsible for decontaminating about 8,000 km{sup 2} within Fukushima-ken and roughly 4,900 km{sup 2} in areas outside the prefecture. The described waste volume estimation method also does not give any consideration to areas with localized hot spots. Land use and area dose rate estimates for the 20 km evacuation zone indicate there are large areas where doses to the public can be mitigated through methods other than removal and disposal of soil and other wastes. Several additional options for waste reduction can also be considered, including: - Recycling/reusing or disposing of as municipal waste material that can be unconditionally cleared; - Establishing additional precautionary (e.g., liners) and monitoring requirements for municipal landfills to dispose of some conditionally-cleared material; and - Using slightly-contaminated material in construction of reclamations, banks and roads. Waste estimates for cleanup will continue to evolve as decontamination plans are drafted and finalized. (authors)« less

42 CFR 57.1508 - Amount of interest subsidy payments; limitations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... payments will be made, and the level of such payments shall be determined by the Secretary on the basis of... consideration his analysis of the present and reasonable projected future financial ability of the applicant to... Profession Personnel § 57.1508 Amount of interest subsidy payments; limitations. The length of time for which...

Implicit Word Learning Benefits from Semantic Richness: Electrophysiological and Behavioral Evidence

ERIC Educational Resources Information Center

Rabovsky, Milena; Sommer, Werner; Abdel Rahman, Rasha

2012-01-01

Words differ considerably in the amount of associated semantic information. Despite the crucial role of meaning in language, it is still unclear whether and how this variability modulates language learning. Here, we provide initial evidence demonstrating that implicit learning in repetition priming is influenced by the amount of semantic features…

26 CFR 1.817-4 - Special rules.

Code of Federal Regulations, 2010 CFR

2010-04-01

... adjustments for certain changes in reserves and assets). (d) Certain other reinsurance transactions. (1) For... consideration, shall be treated as an item of gross amount under section 809(c)(3). (ii) In connection with an... reinsured in any such taxable year as an item of gross amount under section 809(c)(1), and (B) Treat any...

Shape Control of Solar Collectors Using Shape Memory Alloy Actuators

NASA Technical Reports Server (NTRS)

Lobitz, D. W.; Grossman, J. W.; Allen, J. J.; Rice, T. M.; Liang, C.; Davidson, F. M.

1996-01-01

Solar collectors that are focused on a central receiver are designed with a mechanism for defocusing the collector or disabling it by turning it out of the path of the sun's rays. This is required to avoid damaging the receiver during periods of inoperability. In either of these two cases a fail-safe operation is very desirable where during power outages the collector passively goes to its defocused or deactivated state. This paper is principally concerned with focusing and defocusing the collector in a fail-safe manner using shape memory alloy actuators. Shape memory alloys are well suited to this application in that once calibrated the actuators can be operated in an on/off mode using a minimal amount of electric power. Also, in contrast to other smart materials that were investigated for this application, shape memory alloys are capable of providing enough stroke at the appropriate force levels to focus the collector. Design and analysis details presented, along with comparisons to test data taken from an actual prototype, demonstrate that the collector can be repeatedly focused and defocused within accuracies required by typical solar energy systems. In this paper the design, analysis and testing of a solar collector which is deformed into its desired shape by shape memory alloy actuators is presented. Computations indicate collector shapes much closer to spherical and with smaller focal lengths can be achieved by moving the actuators inward to a radius of approximately 6 inches. This would require actuators with considerably more stroke and some alternate SMA actuators are currently under consideration. Whatever SMA actuator is finally chosen for this application, repeatability and fatigue tests will be required to investigate the long term performance of the actuator.

Memory-Efficient Analysis of Dense Functional Connectomes.

PubMed

Loewe, Kristian; Donohue, Sarah E; Schoenfeld, Mircea A; Kruse, Rudolf; Borgelt, Christian

2016-01-01

The functioning of the human brain relies on the interplay and integration of numerous individual units within a complex network. To identify network configurations characteristic of specific cognitive tasks or mental illnesses, functional connectomes can be constructed based on the assessment of synchronous fMRI activity at separate brain sites, and then analyzed using graph-theoretical concepts. In most previous studies, relatively coarse parcellations of the brain were used to define regions as graphical nodes. Such parcellated connectomes are highly dependent on parcellation quality because regional and functional boundaries need to be relatively consistent for the results to be interpretable. In contrast, dense connectomes are not subject to this limitation, since the parcellation inherent to the data is used to define graphical nodes, also allowing for a more detailed spatial mapping of connectivity patterns. However, dense connectomes are associated with considerable computational demands in terms of both time and memory requirements. The memory required to explicitly store dense connectomes in main memory can render their analysis infeasible, especially when considering high-resolution data or analyses across multiple subjects or conditions. Here, we present an object-based matrix representation that achieves a very low memory footprint by computing matrix elements on demand instead of explicitly storing them. In doing so, memory required for a dense connectome is reduced to the amount needed to store the underlying time series data. Based on theoretical considerations and benchmarks, different matrix object implementations and additional programs (based on available Matlab functions and Matlab-based third-party software) are compared with regard to their computational efficiency. The matrix implementation based on on-demand computations has very low memory requirements, thus enabling analyses that would be otherwise infeasible to conduct due to insufficient memory. An open source software package containing the created programs is available for download.

Memory-Efficient Analysis of Dense Functional Connectomes

PubMed Central

Loewe, Kristian; Donohue, Sarah E.; Schoenfeld, Mircea A.; Kruse, Rudolf; Borgelt, Christian

2016-01-01

The functioning of the human brain relies on the interplay and integration of numerous individual units within a complex network. To identify network configurations characteristic of specific cognitive tasks or mental illnesses, functional connectomes can be constructed based on the assessment of synchronous fMRI activity at separate brain sites, and then analyzed using graph-theoretical concepts. In most previous studies, relatively coarse parcellations of the brain were used to define regions as graphical nodes. Such parcellated connectomes are highly dependent on parcellation quality because regional and functional boundaries need to be relatively consistent for the results to be interpretable. In contrast, dense connectomes are not subject to this limitation, since the parcellation inherent to the data is used to define graphical nodes, also allowing for a more detailed spatial mapping of connectivity patterns. However, dense connectomes are associated with considerable computational demands in terms of both time and memory requirements. The memory required to explicitly store dense connectomes in main memory can render their analysis infeasible, especially when considering high-resolution data or analyses across multiple subjects or conditions. Here, we present an object-based matrix representation that achieves a very low memory footprint by computing matrix elements on demand instead of explicitly storing them. In doing so, memory required for a dense connectome is reduced to the amount needed to store the underlying time series data. Based on theoretical considerations and benchmarks, different matrix object implementations and additional programs (based on available Matlab functions and Matlab-based third-party software) are compared with regard to their computational efficiency. The matrix implementation based on on-demand computations has very low memory requirements, thus enabling analyses that would be otherwise infeasible to conduct due to insufficient memory. An open source software package containing the created programs is available for download. PMID:27965565

Transportation and utilization of aggregates for road construction

NASA Astrophysics Data System (ADS)

Fladvad, Marit; Wigum, Børge Johannes; Aurstad, Joralf

2017-04-01

Road construction relies on non-renewable aggregate resources as the main construction material. Sources for high-quality aggregate resources are scattered, and requirements for aggregate quality can cause long transport distances between quarry and road construction site. In European countries, the average aggregate consumption per capita is 5 tonnes per year (European Aggregates Association, 2016), while the corresponding figure for Norway is 11 tonnes (Neeb, 2015). Half the Norwegian aggregate production (sand, gravel and crushed rock) is used for road construction. In Norway, aggregate resources have been considered abundant. However, stricter requirement for aggregate quality, and increased concern for sustainability and environmental issues have spurred focus on reduction of transport lengths through better utilization of local aggregate materials. In this research project, information about pavement design and aggregate quality requirements were gathered from a questionnaire sent to selected experts from the World Road Organization (PIARC), European Committee for Standardization (CEN), and Nordic Road Association (NVF). The gathered data was compared to identify differences and similarities for aggregate use in the participating countries. Further, the data was compared to known data from Norway regarding: - amount of aggregates required for a road structure - aggregate transport lengths and related costs A total of 18 countries participated in the survey, represented by either road authorities, research institutions, or contractors. There are large variations in practice for aggregate use among the represented countries, and the selection of countries is sufficient to illustrate a variety in pavement designs, aggregate sizes, and quality requirements for road construction. There are considerable differences in both pavement thickness and aggregate sizes used in the studied countries. Total thicknesses for pavement structures varies from 220 mm to 2400 mm, and aggregate sizes for unbound materials varies from 19 mm to 600 mm. These results imply great differences in the amount of aggregate transport to road construction sites. Another important factor is the distances between the construction sites and the aggregate sources. For many projects, especially in countries in need of importing aggregates, aggregate transport will have considerable impact on sustainability assessment of the construction projects. If pavement design can be altered with the goal of achieving better utilization of local aggregates through adaption to the quality of local aggregates, aggregate transportation can be reduced. Reduced transport will alter the economical balance of a project, allowing reallocation of costs from transport to e.g. improved aggregate production. The overall result can be more profitable construction projects and a more sustainable development of road structures.

Systemic venous drainage: can we help Newton?

PubMed

Corno, Antonio F

2007-06-01

In recent years substantial progress occurred in the techniques of cardiopulmonary bypass, but the factor potentially limiting the flexibility of cardiopulmonary bypass remains the drainage of the systemic venous return. In the daily clinical practice of cardiac surgery, the amount of systemic venous return on cardiopulmonary bypass is directly correlated with the amount of the pump flow. As a consequence, the pump flow is limited by the amount of venous return that the pump is receiving. On cardiopulmonary bypass the amount of venous drainage depends upon the central venous pressure, the height differential between patient and inlet of the venous line into the venous reservoir, and the resistance in the venous cannula(s) and circuit. The factors determining the venous return to be taken into consideration in cardiac surgery are the following: (a) characteristics of the individual patient; (b) type of planned surgical procedure; (c) type of venous cannula(s); (d) type of circuit for cardiopulmonary bypass; (e) strategy of cardiopulmonary bypass; (f) use of accessory mechanical systems to increased the systemic venous return. The careful pre-operative evaluation of all the elements affecting the systemic venous drainage, including the characteristics of the individual patient and the type of required surgical procedure, the choice of the best strategy of cardiopulmonary bypass, and the use of the most advanced materials and tools, can provide a systemic venous drainage substantially better than what it would be allowed by the simple "Law of universal gravitation" by Isaac Newton.

Biocide leaching during field experiments on treated articles.

PubMed

Schoknecht, Ute; Mathies, Helena; Wegner, Robby

2016-01-01

Biocidal products can be sources of active substances in surface waters caused by weathering of treated articles. Marketing and use of biocidal products can be limited according to the European Biocidal Products Regulation if unacceptable risks to the environment are expected. Leaching of active substances from treated articles was observed in field experiments to obtain information on leaching processes and investigate the suitability of a proposed test method. Leaching under weathering conditions proceeds discontinuously and tends to decrease with duration of exposure. It does not only mainly depend on the availability of water but is also controlled by transport processes within the materials and stability of the observed substances. Runoff amount proved to be a suitable basis to compare results from different experiments. Concentrations of substances are higher in runoff collected from vertical surfaces compared to horizontal ones, whereas the leached amounts per surface area are higher from horizontal surfaces. Gaps in mass balances indicate that additional processes such as degradation and evaporation may be relevant to the fate of active substances in treated articles. Leached amounts of substances were considerably higher when the materials were exposed to intermittent water contact under laboratory conditions as compared to weathering of vertically exposed surfaces. Experiences from the field experiments were used to define parameters of a procedure that is now provided to fulfil the requirements of the Biocidal Products Regulation. The experiments confirmed that the amount of water which is in contact with exposed surfaces is the crucial parameter determining leaching of substances.

Wavelength dependence of nanosecond infrared laser-induced breakdown in water: Evidence for multiphoton initiation via an intermediate state

NASA Astrophysics Data System (ADS)

Linz, Norbert; Freidank, Sebastian; Liang, Xiao-Xuan; Vogelmann, Hannes; Trickl, Thomas; Vogel, Alfred

2015-04-01

Investigation of the wavelength dependence (725-1025 nm) of the threshold for nanosecond optical breakdown in water revealed steps consistent with breakdown initiation by multiphoton ionization, with an initiation energy of about 6.6 eV. This value is considerably smaller than the autoionization threshold of about 9.5 eV, which can be regarded as band gap relevant for avalanche ionization. Breakdown initiation is likely to occur via excitation of a valence band electron into a solvated state, followed by rapid excitation into the conduction band. Theoretical analysis based on these assumptions suggests that the seed electron density required for initiating avalanche ionization amounts to 2.5 ×1015c m-3 at 725 nm and drops to 1.1 ×1012c m-3 at 1025 nm. These results demand changes of future breakdown modeling for water, including the use of a larger band gap than previously employed, the introduction of an intermediate energy level for initiation, and consideration of the wavelength dependence of seed electron density.

Medication administration through enteral feeding tubes.

PubMed

Williams, Nancy Toedter

2008-12-15

An overview of enteral feeding tubes, drug administration techniques, considerations for dosage form selection, common drug interactions with enteral formulas, and methods to minimize tube occlusion is given. Enteral nutrition through a feeding tube is the preferred method of nutrition support in patients who have a functioning gastrointestinal tract but who are unable to be fed orally. This method of delivering nutrition is also commonly used for administering medications when patients cannot swallow safely. However, several issues must be considered with concurrent administration of oral medications and enteral formulas. Incorrect administration methods may result in clogged feeding tubes, decreased drug efficacy, increased adverse effects, or drug-formula incompatibilities. Various enteral feeding tubes are available and are typically classified by site of insertion and location of the distal tip of the feeding tube. Liquid medications, particularly elixirs and suspensions, are preferred for enteral administration; however, these formulations may be hypertonic or contain large amounts of sorbitol, and these properties increase the potential for adverse effects. Before solid dosage forms are administered through the feeding tube, it should be determined if the medications are suitable for manipulation, such as crushing a tablet or opening a capsule. Medications should not be added directly to the enteral formula, and feeding tubes should be properly flushed with water before and after each medication is administered. To minimize drug-nutrient interactions, special considerations should be taken when administering phenytoin, carbamazepine, warfarin, fluoroquinolones, and proton pump inhibitors via feeding tubes. Precautions should be implemented to prevent tube occlusions, and immediate intervention is required when blockages occur. Successful drug delivery through enteral feeding tubes requires consideration of the tube size and placement as well as careful selection and appropriate administration of drug dosage forms.

Aligning Quality for Populations and Patients: Do We Know Which Way to Go?

PubMed Central

Lubetkin, Erica Ilene; Sofaer, Shoshanna; Gold, Marthe R.; Berger, Marc L.; Murray, James F.; Teutsch, Steven M.

2003-01-01

Both the medical care and public health systems have invested considerable resources to define, measure, and improve quality and health outcomes. A movement toward accountability has generated performance indicators from the medical arena and “leading health indicators” from the public health arena. The focus on specific conditions by the medical care system has been at odds with public health’s emphasis on improving population health and has perpetuated a bifurcated system. Aligning the goals of medical care with those of public health will require reformulation of performance measurement and accountability into a common language that is valued by both systems. Such a creation would amount to a whole that is stronger than the sum of the component parts. PMID:12604482

The 57Fe Mössbauer parameters of pyrite and marcasite with different provenances

USGS Publications Warehouse

Evans, B.J.; Johnson, R.G.; Senftle, F.E.; Cecil, C.B.; Dulong, F.

1982-01-01

The Mössbauer parameters of pyrite and marcasite exhibit appreciable variations, which bear no simple relationship to the geological environment in which they occur but appear to be selectively influenced by impurities, especially arsenic, in the pyrite lattice. Quantitative and qualitative determinations of pyrite/marcasite mechanical mixtures are straightforward at 298 K and 77 K but do require least-squares computer fittings and are limited to accuracies ranging from ±5 to ±15 per cent by uncertainties in the parameter values of the pure phases. The methodology and results of this investigation are directly applicable to coals for which the presence and relative amounts of pyrite and marcasite could be of considerable genetic significance.

The missing mass in clusters of galaxies and elliptical galaxies

NASA Technical Reports Server (NTRS)

Mushotzky, Richard F.

1991-01-01

We review the available data for the existence of dark matter in clusters of galaxies and elliptical galaxies. While the amount of dark matter in clusters is not well determined, both the X-ray and optical data show that more than 50 percent of the total mass must be dark. There is in general fair agreement in the binding mass estimates between the X-ray and optical techniques, but there is not detailed agreement on the form of the potential or the distribution of dark matter. The X-ray spectral and spatial observations of elliptical galaxies demonstrate that dark matter is also required in these objects and that it must be considerably more extended than the stellar distribution.

Development of an integrated BEM approach for hot fluid structure interaction

NASA Technical Reports Server (NTRS)

Dargush, Gary F.; Banerjee, Prasanta K.; Honkala, Keith A.

1988-01-01

In the present work, the boundary element method (BEM) is chosen as the basic analysis tool, principally because the definition of temperature, flux, displacement and traction are very precise on a boundary-based discretization scheme. One fundamental difficulty is, of course, that a BEM formulation requires a considerable amount of analytical work, which is not needed in the other numerical methods. Progress made toward the development of a boundary element formulation for the study of hot fluid-structure interaction in Earth-to-Orbit engine hot section components is reported. The primary thrust of the program to date has been directed quite naturally toward the examination of fluid flow, since boundary element methods for fluids are at a much less developed state.

Optimal parameter estimation with a fixed rate of abstention

NASA Astrophysics Data System (ADS)

Gendra, B.; Ronco-Bonvehi, E.; Calsamiglia, J.; Muñoz-Tapia, R.; Bagan, E.

2013-07-01

The problems of optimally estimating a phase, a direction, and the orientation of a Cartesian frame (or trihedron) with general pure states are addressed. Special emphasis is put on estimation schemes that allow for inconclusive answers or abstention. It is shown that such schemes enable drastic improvements, up to the extent of attaining the Heisenberg limit in some cases, and the required amount of abstention is quantified. A general mathematical framework to deal with the asymptotic limit of many qubits or large angular momentum is introduced and used to obtain analytical results for all the relevant cases under consideration. Parameter estimation with abstention is also formulated as a semidefinite programming problem, for which very efficient numerical optimization techniques exist.

DELAYED HYPERSENSITIVITY

PubMed Central

Uhr, Jonathan W.; Salvin, S. B.; Pappenheimer, A. M.

1957-01-01

A general method for induction of the delayed hypersensitive state directed against single protein antigens is described. The method consists of intradermal injection of minute amounts of washed immune precipitates containing the antigen in question. Provided the specific precipitates are formed in the region of antibody excess, maximal sensitivity develops at least 2 to 3 weeks before detectable circulating antibody is formed in guinea pigs against the sensitizing antigen. Neither adjuvant nor killed acid-fast bacteria are required for induction of the delayed hypersensitive state although the degree of sensitization is considerably increased when the sensitizing material is incorporated in Freund's complete adjuvant. Characteristics of the "delayed" as opposed to the "immediate" hypersensitive states in the guinea pig are described and implications of the findings are discussed. PMID:13385403

The physics of small megavoltage photon beam dosimetry.

PubMed

Andreo, Pedro

2018-02-01

The increased interest during recent years in the use of small megavoltage photon beams in advanced radiotherapy techniques has led to the development of dosimetry recommendations by different national and international organizations. Their requirement of data suitable for the different clinical options available, regarding treatment units and dosimetry equipment, has generated a considerable amount of research by the scientific community during the last decade. The multiple publications in the field have led not only to the availability of new invaluable data, but have also contributed substantially to an improved understanding of the physics of their dosimetry. This work provides an overview of the most important aspects that govern the physics of small megavoltage photon beam dosimetry. Copyright © 2017 Elsevier B.V. All rights reserved.

Energy-efficiency increase of reinforced concrete columns with recessed working fittings

NASA Astrophysics Data System (ADS)

Muradyan, Viktor; Mailyan, Dmitry; Lyapin, Alexander; Chubarov, Valery

2017-10-01

One of the most important ways of increasing the energy-efficiency of the construction industry is the reduction of the material capacity of structures and labour intensity of their manufacturing. Since manufacturing of reinforced concrete structures requires considerable financial and energy expenses, then reduction of technological cycle operations is sure to be the urgent task today. It is well known, that in the recessed reinforced concrete elements the transverse reinforcement is fixed for the purpose of ensuring the longitudinal rods fixity. Besides, the thickness of the protective layer, as a rule, is taken the minimum. The authors proposed to increase the protective layer, and that will reduce the amount of transverse reinforcement rods significantly and will make the technological process of structures manufacturing easier.

[The work of medical doctors on psychiatric wards: an analysis of everyday activities].

PubMed

Putzhammer, A; Senft, I; Fleischmann, H; Klein, H E; Schmauss, M; Schreiber, W; Hajak, G

2006-03-01

In Germany, the economic situation of psychiatric hospitals has markedly changed during the last years. Whilst the number of patients has steadily increased, many clinics considerably reduced the number of therapeutic staff due to an increasing lack of financial support. The German psychiatry personnel regulations act defines the number of therapeutic staff required for an adequate psychiatric treatment, but the requirements of this regulations act nowadays are widely missed in most of the German psychiatric hospitals. This severely affects the therapeutic work on psychiatric wards. This study analyses tasks and activities of medical doctors on psychiatric wards and compares the hours spent with various types of activities with the amount of time that should be spent according to the personnel regulations act. Results show that doctors spend much more time with documentation and administrative work than originally intended by the personnel regulations act. They compensate this mainly by a reduction of time spent in direct contact with the patients. In this context, the number of psychotherapy sessions as well as sessions with the patients' relatives has been considerably reduced, whereas the time spent for emergency intervention and basic treatment still corresponds to the calculations according to the personnel regulations act. All in all, the results show that a reduction of therapeutic staff in psychiatric hospitals directly leads to a change in treatment settings with a focus on less individual treatment options.

ACCOMPLISHMENTS OF THE AMERICAN-POLISH PROGRAM FOR ELIMINATION OF LOW EMISSIONS IN KRAKOW

DOE Office of Scientific and Technical Information (OSTI.GOV)

BUTCHER,T.A.; PIERCE,B.

1998-11-05

In 1991, US and Polish officials signed a Memorandum of Understanding formally initiating and directing the Cracow Clean Fossil Fuels and Energy Efficiency Program. Developing a program approach for the most effective use of the available funds required considerable effort on the part of all project participants. The team recognized early that the cost of solving the low emissions problem even in only one city far exceeded the amount of available US funds. Economic conditions in Poland limited availability of local capital funds for environmental projects. Imposing environmental costs on struggling companies or city residents under difficult conditions of themore » early 1990's required careful consideration of the economic and political impacts. For all of these reasons the program sought to identify technologies for achieving air quality goals which, through improved efficiency and/or reduced fuel cost, could be so attractive economically as to lead to self-sustaining activities beyond the end of the formal project. The effort under this program has been focused into 5 main areas of interest as follows: (1) Energy Conservation and Extension of Central Station District Heating; (2) Replacement of Coal- and Coke-Fired Boilers with Natural Gas-Fired Boilers; (3) Replacement of Coal-Fired Home Stoves with Electric Heating Appliances; (4) Reduction of Emissions from Stoker-Fired Boiler Houses; and (5) Reduction of Emissions from Coal-Fired Home Heating Stoves.« less

Bio-inspired silicon nanospikes fabricated by metal-assisted chemical etching for antibacterial surfaces

NASA Astrophysics Data System (ADS)

Hu, Huan; Siu, Vince S.; Gifford, Stacey M.; Kim, Sungcheol; Lu, Minhua; Meyer, Pablo; Stolovitzky, Gustavo A.

2017-12-01

The recently discovered bactericidal properties of nanostructures on wings of insects such as cicadas and dragonflies have inspired the development of similar nanostructured surfaces for antibacterial applications. Since most antibacterial applications require nanostructures covering a considerable amount of area, a practical fabrication method needs to be cost-effective and scalable. However, most reported nanofabrication methods require either expensive equipment or a high temperature process, limiting cost efficiency and scalability. Here, we report a simple, fast, low-cost, and scalable antibacterial surface nanofabrication methodology. Our method is based on metal-assisted chemical etching that only requires etching a single crystal silicon substrate in a mixture of silver nitrate and hydrofluoric acid for several minutes. We experimentally studied the effects of etching time on the morphology of the silicon nanospikes and the bactericidal properties of the resulting surface. We discovered that 6 minutes of etching results in a surface containing silicon nanospikes with optimal geometry. The bactericidal properties of the silicon nanospikes were supported by bacterial plating results, fluorescence images, and scanning electron microscopy images.

Effect of temperature on anaerobic treatment of black water in UASB-septic tank systems.

PubMed

Luostarinen, Sari; Sanders, Wendy; Kujawa-Roeleveld, Katarzyna; Zeeman, Grietje

2007-03-01

The effect of northern European seasonal temperature changes and low temperature on the performance of upflow anaerobic sludge blanket (UASB)-septic tanks treating black water was studied. Three UASB-septic tanks were monitored with different operational parameters and at different temperatures. The results indicated the feasibility of the UASB-septic tank for (pre)treatment of black water at low temperatures with respect to removal of suspended solids and dissolved organic material. Inoculum sludge had little effect on COD(ss) removal, though in the start-up phase some poorly adapted inoculum disintegrated and washed out, thus requiring consideration when designing the process. Removal of COD(dis) was at first negative, but improved as the sludge adapted to low temperature. The UASB-septic tank alone did not comply with Finnish or Dutch treatment requirements and should therefore be considered mainly as a pre-treatment method. However, measuring the requirements as mgCOD l(-1) may not always be the best method, as the volume of the effluent discharged is also an important factor in the final amount of COD entering the receiving water bodies.

New realisation of Preisach model using adaptive polynomial approximation

NASA Astrophysics Data System (ADS)

Liu, Van-Tsai; Lin, Chun-Liang; Wing, Home-Young

2012-09-01

Modelling system with hysteresis has received considerable attention recently due to the increasing accurate requirement in engineering applications. The classical Preisach model (CPM) is the most popular model to demonstrate hysteresis which can be represented by infinite but countable first-order reversal curves (FORCs). The usage of look-up tables is one way to approach the CPM in actual practice. The data in those tables correspond with the samples of a finite number of FORCs. This approach, however, faces two major problems: firstly, it requires a large amount of memory space to obtain an accurate prediction of hysteresis; secondly, it is difficult to derive efficient ways to modify the data table to reflect the timing effect of elements with hysteresis. To overcome, this article proposes the idea of using a set of polynomials to emulate the CPM instead of table look-up. The polynomial approximation requires less memory space for data storage. Furthermore, the polynomial coefficients can be obtained accurately by using the least-square approximation or adaptive identification algorithm, such as the possibility of accurate tracking of hysteresis model parameters.

Elimination of cadmium trace contaminations from drinking water.

PubMed

Zhao, Xuan; Höll, Wolfgang H; Yun, Guichun

2002-02-01

Raw waters polluted with trace heavy metals present serious problems to the part of the Chinese water supply. One of the important contaminants is cadmium. Removal of trace amounts of heavy metals can be achieved by means of selective sorption processes. One of the possibilities is the application of weak base anion exchangers. LEWIS-base/acid interactions lead to an exclusive sorption of heavy metal cations and an equivalent amount of anions of strong acids. The respective elimination of cadmium from pure solutions and spiked natural water and the regeneration of the exhausted exchanger has been investigated. The results demonstrate a very efficient elimination. The standards for drinking water are met for a very large relative volume of treated water. In addition, even a considerable share of dissolved organic matter is adsorbed. Regeneration requires a first step with sulfuric acid to remove the metals and a second one with sodium hydroxide to neutralize the exchanger and to displace the DOC adsorbed. The heavy metals can be concentrated in a small volume which facilitates the discharge of the waste.

Mate Choice and Domestic Life in the Nineteenth Century Marriage Manual

ERIC Educational Resources Information Center

Gordon, Michael; Berstein, M. Charles

1970-01-01

A considerable amount of diversity was discovered in the views expressed in the 63 books reviewed. Religious, physical, and social considerations were the factors most heavily stressed with regard to mate choce; romantic love was not an important factor. Sex is discussed almost solely in terms of its procreative function, although some change is…

26 CFR 1.815-6 - Special rules.

Code of Federal Regulations, 2010 CFR

2010-04-01

... percent of the net amount of the premiums and other consideration taken into account for the taxable year... insurance reserves (as defined in sec. 801(b)) as of 12-31-58 3,900 Premiums and other consideration taken... greatest: (i) 15 percent of life insurance reserves (as defined in section 801(b) and paragraph (a) of § 1...

An Analytical Investigation of the Heat Losses from a U.S. Navy K-Type Airship

NASA Technical Reports Server (NTRS)

Hillendahl, Wesley H.; George, Ralph E.

1946-01-01

The heat losses from the envelope surface of a U.S. Navy K-type airship are evaluated to determine if the use of heat is a feasible means of preventing ice and snow accumulations on lighter-than-air craft during flight and when moored uncovered. Consideration is given to heat losses in clear air (no liquid water present in the atmosphere) and in probable conditions of icing and snow. The results of the analysis indicate that the amount of heat required in flight to raise the surface temperature of the entire envelope to the extent considered adequate for ice protection, based on experience with tests of heavier-than-air craft, is very large. Existing types of heating equipment which could be used to supply this quantity of heat would probably be too bulky and heavy to provide a practical flight installation. The heat requirements to provide protection for the nose and stern regions in assumed mild to moderate icing conditions appear to be within the range of the capacity of current types of heating equipment suitable for flight use. The amount of heat necessary to prevent snow accumulations on the upper surface of the airship envelope when moored uncovered under all conditions appear to be excessive for the heating equipment presently available for flight use, but could possibly be achieved with auxiliary ground heating equipment.

26 CFR 25.2702-4 - Certain property treated as held in trust.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (CONTINUED) ESTATE AND GIFT TAXES GIFT TAX; GIFTS MADE AFTER DECEMBER 31, 1954 Special Valuation Rules § 25... and the terms of the lease conform to the value so determined. (c) Joint purchases. Solely for... paragraph (c), the amount of the individual's gift will not exceed the amount of consideration furnished by...

Nutrition, Exercise, and Sleep: Physiological Considerations in the Classroom for Alternative Certification Teachers. Editor's Perspective Article

ERIC Educational Resources Information Center

Evans, Brian R.

2012-01-01

Proper nutrition, adequate amounts of physical activity, and sufficient amounts of sleep are three important variables for healthy children. Alternative certification teachers quickly enter the classroom at the beginning of their programs and may encounter disengaged students who lack the energy needed for quality learning and achievement.…

Transformational Spaceport and Range Capabilities Roadmap Interim Review to National Research Council External Review Panel

NASA Technical Reports Server (NTRS)

Poniatowski, Karen

2005-01-01

Contents include the following: Overview/Introduction. Roadmap Approach/Considerations. Roadmap Timeline/Spirals. Requirements Development. Spaceport/Range Capabilities. Mixed Range Architecture. User Requirements/Customer Considerations. Manifest Considerations. Emerging Launch User Requirements. Capability Breakdown Structure/Assessment. Roadmap Team Observations. Transformational Range Test Concept. Roadmap Team Conclusions. Next Steps.

Refinements to Atlantic basin seasonal hurricane prediction from 1 December

NASA Astrophysics Data System (ADS)

Klotzbach, Philip J.

2008-09-01

Atlantic basin seasonal hurricane predictions have been issued by the Tropical Meteorology Project at Colorado State University since 1984, with early December forecasts being issued every year since early December 1991. These forecasts have yet to show real-time forecast skill, despite several statistical models that have shown considerable hindcast skill. In an effort to improve both hindcast skill and hopefully real-time forecast skill, a modified forecast scheme has been developed using data from 1950 to 2007. Predictors were selected based upon how much variance was explained over the 1950-1989 subperiod. These predictors were then required to explain similar amounts of variance over a latter subperiod from 1990 to 2007. Similar amounts of skill were demonstrated for each of the three predictors selected over the 1950-1989 period, the 1990-2007 period, and the full 1950-2007 period. In addition, significant correlations between individual predictors and physical features known to affect hurricanes during the following August-October (i.e., tropical Atlantic wind shear and sea level pressure changes, ENSO phase changes) were obtained. This scheme uses a new methodology where hindcasts were obtained using linear regression and then ranked to generate final hindcast values. Fifty-four percent of the variance was explained for seasonal Net Tropical Cyclone (NTC) activity over the 1950-2007 period. These hindcasts show considerable differences in landfalling U.S. tropical cyclones, especially for the Florida Peninsula and East Coast. Seven major hurricanes made Florida Peninsula and East Coast landfall during the top 15 largest NTC hindcasts compared with only two major hurricane landfalls in the bottom 15 smallest NTC hindcasts.

Nutrition and Gaelic football: review, recommendations, and future considerations.

PubMed

Beasley, Kevin J

2015-02-01

Gaelic football is the second most popular team sport in Ireland in terms of participation. However, very little research exists on the nutritional considerations for elite male Gaelic footballers. Gaelic football is an intermittent type field game played by two teams of fifteen players. Although amateurs, elite players may train and compete 4-5 times per week and may play for several teams. Research suggests that elite footballers are similar anthropometrically and in fitness to professional soccer players. Work-rate analysis shows that footballers experience longer durations of high-intensity (HI) activity (5-7s) and shorter rest durations than soccer players. Recent data suggests that half-forward/backs perform a greater amount of HI work during games than players in other positions. Fatigue is apparent between the first and second halves and the first and fourth quarters. The limited amount of nutritional studies conducted implies that footballers may be deficient in energy intake and may be at the lower end of recommended carbohydrate intakes to support training. A wide variety of sweat rates have been measured during training, demonstrating the importance of individual hydration strategies. Ergogenic aids such as creatine and caffeine may prove beneficial to performance, although data are extrapolated from other sports. Due to the lack of research in Gaelic football, further population specific studies are required. Future areas of research on the impact of nutrition on Gaelic football performance are examined. In particular, the creation of a test protocol mimicking the activity patterns and intensity of a Gaelic football game is warranted.

Practical considerations in the development of hemoglobin-based oxygen therapeutics.

PubMed

Kim, Hae Won; Estep, Timothy N

2012-09-01

The development of hemoglobin based oxygen therapeutics (HBOCs) requires consideration of a number of factors. While the enabling technology derives from fundamental research on protein biochemistry and biological interactions, translation of these research insights into usable medical therapeutics demands the application of considerable technical expertise and consideration and reconciliation of a myriad of manufacturing, medical, and regulatory requirements. The HBOC development challenge is further exacerbated by the extremely high intravenous doses required for many of the indications contemplated for these products, which in turn implies an extremely high level of purity is required. This communication discusses several of the important product configuration and developmental considerations that impact the translation of fundamental research discoveries on HBOCs into usable medical therapeutics.

Physical Activity Patterns in the National Weight Control Registry

PubMed Central

Catenacci, Victoria A.; Ogden, Lorraine G.; Stuht, Jennifer; Phelan, Suzanne; Wing, Rena R.; Hill, James O.; Wyatt, Holly R.

2015-01-01

Objective The National Weight Control Registry (NWCR) was established in 1993 to examine the characteristics of those who are successful at weight loss: individuals maintaining a 13.6-kg weight loss for >1 year. The size of the registry has increased substantially since the early descriptions of this group a decade ago. The purpose of this study was to describe in detail the weekly physical activity habits of NWCR members, to examine the relationship between amount of activity and demographic characteristics, and to determine if changes in activity parameters have occurred over time. Methods and Procedures Participants were 887 men and 2,796 women who enrolled in the NWCR between 1993 and 2004. Physical activity was evaluated at registry entry using the Paffenbarger Physical Activity Questionnaire. Results NWCR entrants report an average of 2,621 ± 2,252 kcal/week in physical activity. There is considerable variability in the amount of activity reported: 25.3% report <1,000 kcal/week and 34.9% report >3,000 kcal/week. Activity level on registry entry is related to the magnitude but not the duration of weight loss. The amount of activity reported by men has decreased over time while no significant change was observed in women. Changes in the types of activities most frequently reported were also observed. Discussion Overall, NWCR participants are an extremely physically active group. However, the amount of activity reported is highly variable, making it difficult to develop a single recommendation for the optimum amount of physical activity for weight loss maintenance. A better understanding of individual-specific determinants of how much activity is required for weight loss maintenance ought to be a high research priority. PMID:18223628

Alcohol advertising and adolescents.

PubMed

Strasburger, Victor C

2002-04-01

Considerable research now exists that the media may exert a powerful influence on adolescents' drug-taking behavior. Teens view an average of 2,000 beer and wine ads per year in the US. In addition, television shows, movies, and music videos contain considerable amounts of alcohol use. This article will discuss the available research and offers suggestions to make the media healthier for teenagers.

Thermal control on the lunar surface

NASA Technical Reports Server (NTRS)

Walker, Sherry T.; Alexander, Reginald A.; Tucker, Stephen P.

1995-01-01

For a mission to the Moon which lasts more than a few days, thermal control is a challenging problem because of the Moon's wide temperature swings and long day and night periods. During the lunar day it is difficult to reject heat temperatures low enough to be comfortable for either humans or electronic components, while excessive heat loss can damage unprotected equipment at night. Fluid systems can readily be designed to operate at either the hot or cold temperature extreme but it is more difficult to accomodate both extermes within the same system. Special consideration should be given to sensitive systems, such as optics and humans, and systems that generate large amounts of waste heat, such as lunar bases or manufacturing facilities. Passive thermal control systems such as covers, shades and optical coatings can be used to mitigate the temperature swings experienced by components. For more precise thermal control active systems such as heaters or heat pumps are required although they require more power than passive systems.

Effects of detuning of electron beam quality for annular beam Cyclotron Autoresonance Accelerator (CARA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, C.; Hirshfield, J.L.; Ganguly, K.

1995-04-01

For high frequency gyrotrons or high gyroharmonic conversion, an axis encircling beam of high voltage is required to allow coupling to whispering gallery fields near the walls. Lower voltage is required for an annular beam of similar velocity ratio {alpha}. Here the authors present simulation results using a modified CARA for preparation of a 320 kV, 20 A, {alpha} = 1.5 annular beam driven at 11.424 GHz with an rf power of 5 MW and an injection voltage of 75 kV. It is shown that the beam quality can be considerably improved by so-called {open_quotes}detuning{close_quotes}, where the tapered axial magneticmore » field profiles in the CARA are caused to deviate a small amount from exact resonance. Under typical operating conditions, beams with axial velocity spreads of the order of 1% are predicted. This approach could be used to provide a high quality annular gyrating beam for multi-megawatt millimeter wave sources in the 100-200 GHz range.« less

Design consideration in constructing high performance embedded Knowledge-Based Systems (KBS)

NASA Technical Reports Server (NTRS)

Dalton, Shelly D.; Daley, Philip C.

1988-01-01

As the hardware trends for artificial intelligence (AI) involve more and more complexity, the process of optimizing the computer system design for a particular problem will also increase in complexity. Space applications of knowledge based systems (KBS) will often require an ability to perform both numerically intensive vector computations and real time symbolic computations. Although parallel machines can theoretically achieve the speeds necessary for most of these problems, if the application itself is not highly parallel, the machine's power cannot be utilized. A scheme is presented which will provide the computer systems engineer with a tool for analyzing machines with various configurations of array, symbolic, scaler, and multiprocessors. High speed networks and interconnections make customized, distributed, intelligent systems feasible for the application of AI in space. The method presented can be used to optimize such AI system configurations and to make comparisons between existing computer systems. It is an open question whether or not, for a given mission requirement, a suitable computer system design can be constructed for any amount of money.

Improved hybrid rocket fuel

NASA Technical Reports Server (NTRS)

Dean, David L.

1995-01-01

McDonnell Douglas Aerospace, as part of its Independent R&D, has initiated development of a clean burning, high performance hybrid fuel for consideration as an alternative to the solid rocket thrust augmentation currently utilized by American space launch systems including Atlas, Delta, Pegasus, Space Shuttle, and Titan. It could also be used in single stage to orbit or as the only propulsion system in a new launch vehicle. Compared to solid propellants based on aluminum and ammonium perchlorate, this fuel is more environmentally benign in that it totally eliminates hydrogen chloride and aluminum oxide by products, producing only water, hydrogen, nitrogen, carbon oxides, and trace amounts of nitrogen oxides. Compared to other hybrid fuel formulations under development, this fuel is cheaper, denser, and faster burning. The specific impulse of this fuel is comparable to other hybrid fuels and is between that of solids and liquids. The fuel also requires less oxygen than similar hybrid fuels to produce maximum specific impulse, thus reducing oxygen delivery system requirements.

A novel liquid organic hydrogen carrier system based on catalytic peptide formation and hydrogenation

PubMed Central

Hu, Peng; Fogler, Eran; Diskin-Posner, Yael; Iron, Mark A.; Milstein, David

2015-01-01

Hydrogen is an efficient green fuel, but its low energy density when stored under high pressure or cryogenically, and safety issues, presents significant disadvantages; hence finding efficient and safe hydrogen carriers is a major challenge. Of special interest are liquid organic hydrogen carriers (LOHCs), which can be readily loaded and unloaded with considerable amounts of hydrogen. However, disadvantages include high hydrogen pressure requirements, high reaction temperatures for both hydrogenation and dehydrogenation steps, which require different catalysts, and high LOHC cost. Here we present a readily reversible LOHC system based on catalytic peptide formation and hydrogenation, using an inexpensive, safe and abundant organic compound with high potential capacity to store and release hydrogen, applying the same catalyst for loading and unloading hydrogen under relatively mild conditions. Mechanistic insight of the catalytic reaction is provided. We believe that these findings may lead to the development of an inexpensive, safe and clean liquid hydrogen carrier system. PMID:25882348

MSAT signalling and network management architectures

NASA Technical Reports Server (NTRS)

Garland, Peter; Keelty, J. Malcolm

1989-01-01

Spar Aerospace has been active in the design and definition of Mobile Satellite Systems since the mid 1970's. In work sponsored by the Canadian Department of Communications, various payload configurations have evolved. In addressing the payload configuration, the requirements of the mobile user, the service provider and the satellite operator have always been the most important consideration. The current Spar 11 beam satellite design is reviewed, and its capabilities to provide flexibility and potential for network growth within the WARC87 allocations are explored. To enable the full capabilities of the payload to be realized, a large amount of ground based Switching and Network Management infrastructure will be required, when space segment becomes available. Early indications were that a single custom designed Demand Assignment Multiple Access (DAMA) switch should be implemented to provide efficient use of the space segment. As MSAT has evolved into a multiple service concept, supporting many service providers, this architecture should be reviewed. Some possible signalling and Network Management solutions are explored.

Efficient implementation of neural network deinterlacing

NASA Astrophysics Data System (ADS)

Seo, Guiwon; Choi, Hyunsoo; Lee, Chulhee

2009-02-01

Interlaced scanning has been widely used in most broadcasting systems. However, there are some undesirable artifacts such as jagged patterns, flickering, and line twitters. Moreover, most recent TV monitors utilize flat panel display technologies such as LCD or PDP monitors and these monitors require progressive formats. Consequently, the conversion of interlaced video into progressive video is required in many applications and a number of deinterlacing methods have been proposed. Recently deinterlacing methods based on neural network have been proposed with good results. On the other hand, with high resolution video contents such as HDTV, the amount of video data to be processed is very large. As a result, the processing time and hardware complexity become an important issue. In this paper, we propose an efficient implementation of neural network deinterlacing using polynomial approximation of the sigmoid function. Experimental results show that these approximations provide equivalent performance with a considerable reduction of complexity. This implementation of neural network deinterlacing can be efficiently incorporated in HW implementation.

Perioperative Acupuncture and Related Techniques

PubMed Central

Chernyak, Grigory V.; Sessler, Daniel I.

2005-01-01

Acupuncture and related techniques are increasingly practiced in conventional medical settings, and the number of patients willing to use these techniques is increasing. Despite more than 30 years of research, the exact mechanism of action and efficacy of acupuncture have not been established. Furthermore, most aspects of acupuncture have yet to be adequately tested. There thus remains considerable controversy about the role of acupuncture in clinical medicine. Acupuncture apparently does not reduce volatile anesthetic requirement by a clinically important amount. However, preoperative sedation seems to be a promising application of acupuncture in perioperative settings. Acupuncture may be effective for postoperative pain relief but requires a high level of expertise by the acupuncture practitioner. Acupuncture and related techniques can be used for treatment and prophylaxis of postoperative nausea and vomiting in routine clinical practice in combination with, or as an alternative to, conventional antiemetics when administered before induction of general anesthesia. Summary Statement: The use of acupuncture for perioperative analgesia, nausea and vomiting, sedation, anesthesia, and complications is reviewed. PMID:15851892

34 CFR Appendix C to Part 379 - Calculating Required Matching Amount

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 2 2013-07-01 2013-07-01 false Calculating Required Matching Amount C Appendix C to Part 379 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF.... C Appendix C to Part 379—Calculating Required Matching Amount 1. The method for calculating the...

34 CFR Appendix C to Part 379 - Calculating Required Matching Amount

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 2 2014-07-01 2013-07-01 true Calculating Required Matching Amount C Appendix C to Part 379 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF.... C Appendix C to Part 379—Calculating Required Matching Amount 1. The method for calculating the...

Unsupervised classification of variable stars

NASA Astrophysics Data System (ADS)

Valenzuela, Lucas; Pichara, Karim

2018-03-01

During the past 10 years, a considerable amount of effort has been made to develop algorithms for automatic classification of variable stars. That has been primarily achieved by applying machine learning methods to photometric data sets where objects are represented as light curves. Classifiers require training sets to learn the underlying patterns that allow the separation among classes. Unfortunately, building training sets is an expensive process that demands a lot of human efforts. Every time data come from new surveys; the only available training instances are the ones that have a cross-match with previously labelled objects, consequently generating insufficient training sets compared with the large amounts of unlabelled sources. In this work, we present an algorithm that performs unsupervised classification of variable stars, relying only on the similarity among light curves. We tackle the unsupervised classification problem by proposing an untraditional approach. Instead of trying to match classes of stars with clusters found by a clustering algorithm, we propose a query-based method where astronomers can find groups of variable stars ranked by similarity. We also develop a fast similarity function specific for light curves, based on a novel data structure that allows scaling the search over the entire data set of unlabelled objects. Experiments show that our unsupervised model achieves high accuracy in the classification of different types of variable stars and that the proposed algorithm scales up to massive amounts of light curves.

45 CFR 160.404 - Amount of a civil money penalty.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 1 2011-10-01 2011-10-01 false Amount of a civil money penalty. 160.404 Section... RELATED REQUIREMENTS GENERAL ADMINISTRATIVE REQUIREMENTS Imposition of Civil Money Penalties § 160.404 Amount of a civil money penalty. (a) The amount of a civil money penalty will be determined in accordance...

45 CFR 160.404 - Amount of a civil money penalty.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Amount of a civil money penalty. 160.404 Section... RELATED REQUIREMENTS GENERAL ADMINISTRATIVE REQUIREMENTS Imposition of Civil Money Penalties § 160.404 Amount of a civil money penalty. (a) The amount of a civil money penalty will be determined in accordance...

45 CFR 160.404 - Amount of a civil money penalty.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 1 2012-10-01 2012-10-01 false Amount of a civil money penalty. 160.404 Section... RELATED REQUIREMENTS GENERAL ADMINISTRATIVE REQUIREMENTS Imposition of Civil Money Penalties § 160.404 Amount of a civil money penalty. (a) The amount of a civil money penalty will be determined in accordance...

45 CFR 160.404 - Amount of a civil money penalty.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false Amount of a civil money penalty. 160.404 Section... RELATED REQUIREMENTS GENERAL ADMINISTRATIVE REQUIREMENTS Imposition of Civil Money Penalties § 160.404 Amount of a civil money penalty. (a) The amount of a civil money penalty will be determined in accordance...

45 CFR 160.404 - Amount of a civil money penalty.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Amount of a civil money penalty. 160.404 Section... RELATED REQUIREMENTS GENERAL ADMINISTRATIVE REQUIREMENTS Imposition of Civil Money Penalties § 160.404 Amount of a civil money penalty. (a) The amount of a civil money penalty will be determined in accordance...

Producibility consideration for millimeter-wave transceivers

NASA Astrophysics Data System (ADS)

Seashore, Charles R.

1995-10-01

Considerable progress has been made in the development and demonstration of millimeter wave MMIC technology up to frequencies approaching 100 GHz. The recently completed multiyear, ARPA-sponsored, MIMIC program provided a considerable amount of funding and government-contractor team energy to advance the state-of-art with a number of important GaAs-based transceiver building blocks. Unfortuanely, producibility of millimeter wave MMIC transceiver modules has not been similarly addressed to provide a truly low cost, marketable product. This paper considers the module producibility problem and its various technological implications.

30 CFR 243.8 - When will MMS suspend my obligation to comply with an order?

Code of Federal Regulations, 2010 CFR

2010-07-01

...), and: (1) If the amount under appeal is less than $10,000 or does not require payment of a specified... the amount under appeal is less than $1,000 or does not require payment, MMS will suspend your... paying any demanded amount or complying with any other requirement pending appeal. However, voluntarily...

48 CFR 29.304 - Matters requiring special consideration.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Matters requiring special consideration. 29.304 Section 29.304 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS TAXES State and Local Taxes 29.304 Matters requiring special...

48 CFR 29.304 - Matters requiring special consideration.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Matters requiring special consideration. 29.304 Section 29.304 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS TAXES State and Local Taxes 29.304 Matters requiring special...

48 CFR 29.304 - Matters requiring special consideration.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Matters requiring special consideration. 29.304 Section 29.304 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS TAXES State and Local Taxes 29.304 Matters requiring special...

48 CFR 29.304 - Matters requiring special consideration.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Matters requiring special consideration. 29.304 Section 29.304 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS TAXES State and Local Taxes 29.304 Matters requiring special...

48 CFR 29.304 - Matters requiring special consideration.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Matters requiring special consideration. 29.304 Section 29.304 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS TAXES State and Local Taxes 29.304 Matters requiring special...

The training schedule affects the stability, not the magnitude, of the interlimb transfer of learned dynamics

PubMed Central

Joiner, Wilsaan M.; Brayanov, Jordan B.

2013-01-01

The way that a motor adaptation is trained, for example, the manner in which it is introduced or the duration of the training period, can influence its internal representation. However, recent studies examining the gradual versus abrupt introduction of a novel environment have produced conflicting results. Here we examined how these effects determine the effector specificity of motor adaptation during visually guided reaching. After adaptation to velocity-dependent dynamics in the right arm, we estimated the amount of adaptation transferred to the left arm, using error-clamp measurement trials to directly measure changes in learned dynamics. We found that a small but significant amount of generalization to the untrained arm occurs under three different training schedules: a short-duration (15 trials) abrupt presentation, a long-duration (160 trials) abrupt presentation, and a long-duration gradual presentation of the novel dynamic environment. Remarkably, we found essentially no difference between the amount of interlimb generalization when comparing these schedules, with 9–12% transfer of the trained adaptation for all three. However, the duration of training had a pronounced effect on the stability of the interlimb transfer: The transfer elicited from short-duration training decayed rapidly, whereas the transfer from both long-duration training schedules was considerably more persistent (<50% vs. >90% retention over the first 20 trials). These results indicate that the amount of interlimb transfer is similar for gradual versus abrupt training and that interlimb transfer of learned dynamics can occur after even a brief training period but longer training is required for an enduring effect. PMID:23719204

The training schedule affects the stability, not the magnitude, of the interlimb transfer of learned dynamics.

PubMed

Joiner, Wilsaan M; Brayanov, Jordan B; Smith, Maurice A

2013-08-01

The way that a motor adaptation is trained, for example, the manner in which it is introduced or the duration of the training period, can influence its internal representation. However, recent studies examining the gradual versus abrupt introduction of a novel environment have produced conflicting results. Here we examined how these effects determine the effector specificity of motor adaptation during visually guided reaching. After adaptation to velocity-dependent dynamics in the right arm, we estimated the amount of adaptation transferred to the left arm, using error-clamp measurement trials to directly measure changes in learned dynamics. We found that a small but significant amount of generalization to the untrained arm occurs under three different training schedules: a short-duration (15 trials) abrupt presentation, a long-duration (160 trials) abrupt presentation, and a long-duration gradual presentation of the novel dynamic environment. Remarkably, we found essentially no difference between the amount of interlimb generalization when comparing these schedules, with 9-12% transfer of the trained adaptation for all three. However, the duration of training had a pronounced effect on the stability of the interlimb transfer: The transfer elicited from short-duration training decayed rapidly, whereas the transfer from both long-duration training schedules was considerably more persistent (<50% vs. >90% retention over the first 20 trials). These results indicate that the amount of interlimb transfer is similar for gradual versus abrupt training and that interlimb transfer of learned dynamics can occur after even a brief training period but longer training is required for an enduring effect.

A preliminary assessment of the Nimbus-7 CZCS atmospheric correction algorithm in a horizontally inhomogeneous atmosphere. [Coastal Zone Color Scanner

NASA Technical Reports Server (NTRS)

Gordon, H. R.

1981-01-01

For an estimation of the concentration of phytoplankton pigments in the oceans on the basis of Nimbus-7 CZCS imagery, it is necessary to remove the effects of the intervening atmosphere from the satellite imagery. The principle effect of the atmosphere is a loss in contrast caused by the addition of a substantial amount of radiance (path radiance) to that scatttered out of the water. Gordon (1978) has developed a technique which shows considerable promise for removal of these atmospheric effects. Attention is given to the correction algorithm, and its application to CZCS imagery. An alternate method under study for affecting the atmospheric correction requires a knowledge of 'clear water' subsurface upwelled radiance as a function of solar angle and pigment concentration.

Development of an integrated BEM for hot fluid-structure interaction

NASA Technical Reports Server (NTRS)

Banerjee, P. K.; Dargush, G. F.

1989-01-01

The Boundary Element Method (BEM) is chosen as a basic analysis tool principally because the definition of quantities like fluxes, temperature, displacements, and velocities is very precise on a boundary base discretization scheme. One fundamental difficulty is, of course, that the entire analysis requires a very considerable amount of analytical work which is not present in other numerical methods. During the last 18 months all of this analytical work was completed and a two-dimensional, general purpose code was written. Some of the early results are described. It is anticipated that within the next two to three months almost all two-dimensional idealizations will be examined. It should be noted that the analytical work for the three-dimensional case has also been done and numerical implementation will begin next year.

Evaluation of surface integrity of WEDM processed inconel 718 for jet engine application

NASA Astrophysics Data System (ADS)

Sharma, Priyaranjan; Tripathy, Ashis; Sahoo, Narayan

2018-03-01

A unique superalloy, Inconel 718 has been serving for aerospace industries since last two decades. Due to its attractive properties such as high strength at elevated temperature, improved corrosion and oxidation resistance, it is widely employed in the manufacturing of jet engine components. These components require complex shape without affecting the parent material properties. Traditional machining methods seem to be ineffective to fulfil the demand of aircraft industries. Therefore, an advanced feature of wire electrical discharge machining (WEDM) has been utilized to improve the surface features of the jet engine components. With the help of trim-offset technology, it became possible to achieve considerable amount of residual stresses, lower peak to valley height, reduced density of craters and micro globules, minimum hardness alteration and negligible recast layer formation.

32 CFR Enclosure 1 - Requirements for Environmental Considerations-Global Commons

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 1 2011-07-01 2011-07-01 false Requirements for Environmental Considerations... ENVIRONMENT ENVIRONMENTAL EFFECTS ABROAD OF MAJOR DEPARTMENT OF DEFENSE ACTIONS Information requirements. Pt. 187, Encl. 1 Enclosure 1—Requirements for Environmental Considerations—Global Commons A. General. This...

32 CFR Enclosure 1 - Requirements for Environmental Considerations-Global Commons

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 1 2012-07-01 2012-07-01 false Requirements for Environmental Considerations... ENVIRONMENT ENVIRONMENTAL EFFECTS ABROAD OF MAJOR DEPARTMENT OF DEFENSE ACTIONS Information requirements. Pt. 187, Encl. 1 Enclosure 1—Requirements for Environmental Considerations—Global Commons A. General. This...

How much water do we need for irrigation under Climate Change in the Mediterranean?

NASA Astrophysics Data System (ADS)

Fader, Marianela; Alberte, Bondeau; Wolfgang, Cramer; Simon, Decock; Sinan, Shi

2014-05-01

Anthropogenic climate change will very likely alter the hydrological system of already water-limited agricultural landscapes around the Mediterranean. This includes the need for, as well as the availability of irrigation water. On top of that Mediterranean agroecosystems are very likely to be under strong pressure in the near future through changes in consumer demands and diets, increasing urbanization, demographic change, and new markets for agricultural exportation. As a first step to assess the water demand of the agricultural sector, we use an ecohydrological model (the Lund-Potsdam-Jena managed land model, LPJmL) to estimate current and future irrigation water requirements of this region, considering various climate and socio-economic scenarios. LPJmL is a process-based, agricultural and water balance model, where plant growth is ecophysiologically coupled with hydrological variables. For these simulations, the model was adapted to the Mediterranean region in terms of agrosystems as well as crop parameters, and a sensitivity analysis for the irrigation system efficiency was performed. Patterns of current irrigation water requirements differ strongly spatially within the Mediterranean region depending mainly on potential evapotranspiration, the combination of crops cultivated and the extension of irrigated areas. The simulations for the future indicate that the Mediterranean may need considerable additional amounts of irrigation water. However, the regional patterns differ strongly depending on changes in length of growing periods, changes in transpirational rate (temperature and precipitation change, CO2-fertilization), and the consideration of potential improvements in irrigation system efficiency.

[Antibiotic growth promoters for the view of animal nutrition].

PubMed

Kamphues, J

1999-01-01

From 01. 07./09. 1999 on six further antibiotic growth promoters have been banned--with only four substances remaining in this group of feed additives. Therefore, the discussion on a possible induction of bacterial resistance by antibiotic growth promoters, especially in potentially pathogenic bacteria, will sooner or later come to an end which is not least in the interest of the reputation of animal husbandry and food of animal origin. Unfortunately, no short-term solution for health problems by legislation--especially in the gastrointestinal tract--during rearing and the beginning of the fattening period is possible as experiences in Sweden have distinctively shown. Anyway, growth promoting feed additives were not a cure-all of rearing problems, in spite of their use considerable amounts of antibiotics were prescribed during this period. But growth promoters (especially chinoxalines) were most suitable for the prophylaxis of a microbial imbalance in the gastrointestinal tract. Therefore, after the ban of these effective representatives of feed additives the amount of prescribed antimicrobial drugs for metaphylaxis and therapy should be critically observed. The questions of practicable alternatives will be primarily addressed to the fields of animal nutrition, veterinary medicine and feed industry. To answer these questions and to evolve new solutions (as well as to check their suitability in practice) is considerably more intricate than simply to ban these substances which is more attractive for the media, however. It is no progressive solution to give up antimicrobial growth promoters as feed additives and to use the same substances (for example olaquindox) as therapeutics now (prescribed by veterinarians) or to switch to zincoxide or copper (in a dosage high above all nutrient requirements) in order to prevent postweaning problems due to E. coli. But one has to take into consideration the reasons for the use of antibiotics (growth promoters and therapeutics) or other "aids" (e.g. ZnO, Cu) in food producing animals (especially in beef-cattle, pigs and poultry) in "modern" production systems. The matter for conflict is the contrast between a minimised use of antimicrobial substances, as science as well as general public demand, and the requirements of "modern" livestock industry (rationalisation, increase in performance, specialisation, concentration) and general economy (save of resources, lowering of production costs). These well-known and expected problems arise in an almost exemplary manner in the case of antibiotic growth promoting feed additives. Therefore it is most difficult to impart suggestions to the persons involved as well as to the public.

Implications of the Large O VI Columns around Low-redshift L ∗ Galaxies

NASA Astrophysics Data System (ADS)

McQuinn, Matthew; Werk, Jessica K.

2018-01-01

Observations reveal massive amounts of O VI around star-forming L * galaxies, with covering fractions of near unity extending to the host halo’s virial radius. This O VI absorption is typically kinematically centered upon photoionized gas, with line widths that are suprathermal and kinematically offset from the galaxy. We discuss various scenarios and whether they could result in the observed phenomenology (cooling gas flows, boundary layers, shocks, virialized gas). If collisionally ionized, as we argue is most probable, the O VI observations require that the circumgalactic medium (CGM) of L * galaxies holds nearly all of the associated baryons within a virial radius (∼ {10}11 {M}ȯ ) and hosts massive flows of cooling gas with ≈ 30[{nT}/30 {{cm}}-3 {{K}}] {M}ȯ {{yr}}-1, which must be largely prevented from accreting onto the host galaxy. Cooling and feedback energetics considerations require 10< {nT}< 100 cm‑3 K for the warm and hot halo gases. We argue that virialized gas, boundary layers, hot winds, and shocks are unlikely to directly account for the bulk of the O VI. Furthermore, we show that there is a robust constraint on the number density of many of the photoionized ∼ {10}4 {{K}} absorption systems that yields upper bounds in the range n< (0.1-3) × {10}-3(Z/0.3) cm‑3, suggesting that the dominant pressure in some photoionized clouds is nonthermal. This constraint is in accordance with the low densities inferred from more complex photoionization modeling. The large amount of cooling gas that is inferred could re-form these clouds in a fraction of the halo dynamical time, and it requires much of the feedback energy available from supernovae to be dissipated in the CGM.

Inert matrix fuel neutronic, thermal-hydraulic, and transient behavior in a light water reactor

NASA Astrophysics Data System (ADS)

Carmack, W. J.; Todosow, M.; Meyer, M. K.; Pasamehmetoglu, K. O.

2006-06-01

Currently, commercial power reactors in the United States operate on a once-through or open cycle, with the spent nuclear fuel eventually destined for long-term storage in a geologic repository. Since the fissile and transuranic (TRU) elements in the spent nuclear fuel present a proliferation risk, limit the repository capacity, and are the major contributors to the long-term toxicity and dose from the repository, methods and systems are needed to reduce the amount of TRU that will eventually require long-term storage. An option to achieve a reduction in the amount, and modify the isotopic composition of TRU requiring geological disposal is 'burning' the TRU in commercial light water reactors (LWRs) and/or fast reactors. Fuel forms under consideration for TRU destruction in light water reactors (LWRs) include mixed-oxide (MOX), advanced mixed-oxide, and inert matrix fuels. Fertile-free inert matrix fuel (IMF) has been proposed for use in many forms and studied by several researchers. IMF offers several advantages relative to MOX, principally it provides a means for reducing the TRU in the fuel cycle by burning the fissile isotopes and transmuting the minor actinides while producing no new TRU elements from fertile isotopes. This paper will present and discuss the results of a four-bundle, neutronic, thermal-hydraulic, and transient analyses of proposed inert matrix materials in comparison with the results of similar analyses for reference UOX fuel bundles. The results of this work are to be used for screening purposes to identify the general feasibility of utilizing specific inert matrix fuel compositions in existing and future light water reactors. Compositions identified as feasible using the results of these analyses still require further detailed neutronic, thermal-hydraulic, and transient analysis study coupled with rigorous experimental testing and qualification.

Anticipating cognitive effort: roles of perceived error-likelihood and time demands.

PubMed

Dunn, Timothy L; Inzlicht, Michael; Risko, Evan F

2017-11-13

Why are some actions evaluated as effortful? In the present set of experiments we address this question by examining individuals' perception of effort when faced with a trade-off between two putative cognitive costs: how much time a task takes vs. how error-prone it is. Specifically, we were interested in whether individuals anticipate engaging in a small amount of hard work (i.e., low time requirement, but high error-likelihood) vs. a large amount of easy work (i.e., high time requirement, but low error-likelihood) as being more effortful. In between-subject designs, Experiments 1 through 3 demonstrated that individuals anticipate options that are high in perceived error-likelihood (yet less time consuming) as more effortful than options that are perceived to be more time consuming (yet low in error-likelihood). Further, when asked to evaluate which of the two tasks was (a) more effortful, (b) more error-prone, and (c) more time consuming, effort-based and error-based choices closely tracked one another, but this was not the case for time-based choices. Utilizing a within-subject design, Experiment 4 demonstrated overall similar pattern of judgments as Experiments 1 through 3. However, both judgments of error-likelihood and time demand similarly predicted effort judgments. Results are discussed within the context of extant accounts of cognitive control, with considerations of how error-likelihood and time demands may independently and conjunctively factor into judgments of cognitive effort.

Assessing the accuracy of globe thermometer method in predicting outdoor mean radiant temperature under Malaysia tropical microclimate

NASA Astrophysics Data System (ADS)

Khrit, N. G.; Alghoul, M. A.; Sopian, K.; Lahimer, A. A.; Elayeb, O. K.

2017-11-01

Assessing outdoor human thermal comfort and urban climate quality require experimental investigation of microclimatic conditions and their variations in open urban spaces. For this, it is essential to provide quantitative information on air temperature, humidity, wind velocity and mean radiant temperature. These parameters can be quantified directly except mean radiant temperature (Tmrt). The most accurate method to quantify Tmrt is integral radiation measurements (3-D shortwave and long-wave) which require using expensive radiometer instruments. To overcome this limitation the well-known globe thermometer method was suggested to calculate Tmrt. The aim of this study was to assess the possibility of using indoor globe thermometer method in predicting outdoor mean radiant temperature under Malaysia tropical microclimate. Globe thermometer method using small and large sizes of black-painted copper globes (50mm, 150mm) were used to estimate Tmrt and compare it with the reference Tmrt estimated by integral radiation method. The results revealed that the globe thermometer method considerably overestimated Tmrt during the middle of the day and slightly underestimated it in the morning and late evening. The difference between the two methods was obvious when the amount of incoming solar radiation was high. The results also showed that the effect of globe size on the estimated Tmrt is mostly small. Though, the estimated Tmrt by the small globe showed a relatively large amount of scattering caused by rapid changes in radiation and wind speed.

Evaluation and implementation of chemotherapy regimen validation in an electronic health record.

PubMed

Diaz, Amber H; Bubalo, Joseph S

2014-12-01

Computerized provider order entry of chemotherapy regimens is quickly becoming the standard for prescribing chemotherapy in both inpatient and ambulatory settings. One of the difficulties with implementation of chemotherapy regimen computerized provider order entry lies in verifying the accuracy and completeness of all regimens built in the system library. Our goal was to develop, implement, and evaluate a process for validating chemotherapy regimens in an electronic health record. We describe our experience developing and implementing a process for validating chemotherapy regimens in the setting of a standard, commercially available computerized provider order entry system. The pilot project focused on validating chemotherapy regimens in the adult inpatient oncology setting and adult ambulatory hematologic malignancy setting. A chemotherapy regimen validation process was defined as a result of the pilot project. Over a 27-week pilot period, 32 chemotherapy regimens were validated using the process we developed. Results of the study suggest that by validating chemotherapy regimens, the amount of time spent by pharmacists in daily chemotherapy review was decreased. In addition, the number of pharmacist modifications required to make regimens complete and accurate were decreased. Both physician and pharmacy disciplines showed improved satisfaction and confidence levels with chemotherapy regimens after implementation of the validation system. Chemotherapy regimen validation required a considerable amount of planning and time but resulted in increased pharmacist efficiency and improved provider confidence and satisfaction. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

32 CFR Enclosure 2 to Part 187 - Requirements for Environmental Considerations-Foreign Nations and Protected Global Resources

Code of Federal Regulations, 2014 CFR

2014-07-01

... evaluate requirements with respect to the environment; d. Ensure consideration of: (1) Requirements of... other similar broad-guage descriptive factors; b. Identification of the important environmental issues... in its internal affairs and its prerogative to evaluate requirements with respect to the environment...

32 CFR Enclosure 2 to Part 187 - Requirements for Environmental Considerations-Foreign Nations and Protected Global Resources

Code of Federal Regulations, 2013 CFR

2013-07-01

... evaluate requirements with respect to the environment; d. Ensure consideration of: (1) Requirements of... other similar broad-guage descriptive factors; b. Identification of the important environmental issues... in its internal affairs and its prerogative to evaluate requirements with respect to the environment...

Perceptions of Non-Native EFL Teachers' on L1 Use in L2 Classrooms: Implications for Language Program Development

ERIC Educational Resources Information Center

Debreli, Emre

2016-01-01

The study of L1 (first language) use in L2 (second language) classrooms has long received attention in the literature. Despite the considerable amount of research that has been conducted on the phenomenon, the focus has often been on the advantages and disadvantages. Considerably, less research has been conducted regarding the non-native L2…

Pavlovian conditioning and ethanol tolerance.

PubMed

Siegel, S

1987-01-01

Results of considerable amount of research indicate that Pavlovian conditional pharmacological responses, resulting from repeated pairings of ethanol-associated environmental cues with the systemic effects of ethanol, importantly contribute to ethanol tolerance.

Biogeochemical processes controlling density stratification in an iron-meromictic lake

NASA Astrophysics Data System (ADS)

Nixdorf, E.; Boehrer, B.

2015-06-01

Biogeochemical processes and mixing regime of a lake can control each other mutually. The prominent case of iron meromixis is investigated in Waldsee near Doebern, a small lake that originated from surface mining of lignite. From a four years data set of monthly measured electrical conductivity profiles, we calculated summed conductivity as a quantitative variable reflecting the amount of electro-active substances in the entire lake. Seasonal variations followed changing chemocline height. Coinciding changes of electrical conductivities in the monimolimnion indicated that a considerable share of substances, precipitated by the advancing oxygenated epilimnion, re-dissolved in the remaining anoxic deep waters and contributed considerably to the density stratification. In addition, we constructed a lab experiment, in which aeration of monimolimnetic waters removed iron compounds and organic material. Precipitates could be identified by visual inspection. Introduced air bubbles ascended through the water column and formed a water mass similar to the mixolimnetic Waldsee water. The remaining less dense water remained floating on the nearly unchanged monimolimnetic water. In conclusion, iron meromixis as seen in Waldsee did not require two different sources of incoming waters, but the inflow of iron rich deep groundwater and the aeration through the lake surface were fully sufficient.

Economic Ergonomic Approach to Design an Optimal Manpower and Mechanization in Rice Production

NASA Astrophysics Data System (ADS)

Muanah; Syuaib, M. F.; Liyantono

2018-05-01

Productivity of manpower could be improved by considering the economic and ergonomic aspect. The ergonomic aspect (human factor) is required to design an optimal manpower, while in the economic aspect, the well being of manpower could be evaluated from the amount of received income based on their work capability. This research was conducted on February 2016 to January 2017 in Gapoktan Silih Asih rice field Cigombong, Bogor. This study aims to analyze the income of manpower based on current conditions, increasement of working hours and mechanization addition. The results showed that manpower income based on the current condition and ergonomic consideration was Rp 1,174,030/person.month, by increasing the working hours with ergonomic consideration the obtained income was Rp 1,766,204/person.month. the revenues were based on the existing work system even though the increasement of working hours have not provided optimal income due to low productivity. Therefore the results of analysis with the addition of selective mechanization, showed self-ownership machinery was more profitable the obtained income have more than the Bogor minimum wage standard of Rp 2,969,325/person.month.

Life cycle assessment: Existing building retrofit versus replacement

NASA Astrophysics Data System (ADS)

Darabi, Nura

The embodied energy in building materials constitutes a large part of the total energy required for any building (Thormark 2001, 429). In working to make buildings more energy efficient this needs to be considered. Integrating considerations about life cycle assessment for buildings and materials is one promising way to reduce the amount of energy consumption being used within the building sector and the environmental impacts associated with that energy. A life cycle assessment (LCA) model can be utilized to help evaluate the embodied energy in building materials in comparison to the buildings operational energy. This thesis takes into consideration the potential life cycle reductions in energy and CO2 emissions that can be made through an energy retrofit of an existing building verses demolition and replacement with a new energy efficient building. A 95,000 square foot institutional building built in the 1960`s was used as a case study for a building LCA, along with a calibrated energy model of the existing building created as part of a previous Masters of Building Science thesis. The chosen case study building was compared to 10 possible improvement options of either energy retrofit or replacement of the existing building with a higher energy performing building in order to see the life cycle relationship between embodied energy, operational energy, and C02 emissions. As a result of completing the LCA, it is shown under which scenarios building retrofit saves more energy over the lifespan of the building than replacement with new construction. It was calculated that energy retrofit of the chosen existing institutional building would reduce the amount of energy and C02 emissions associated with that building over its life span.

Evaluation of the spatial and temporal measurement requirements of remote sensors for monitoring regional air pollution episodes

NASA Technical Reports Server (NTRS)

Burke, H. H. K.; Bowley, C. J.; Barnes, J. C.

1979-01-01

The spatial and temporal measurement requirements of satellite sensors for monitoring regional air pollution episodes were evaluated. Use was made of two sets of data from the Sulfate Regional Experiment (SURE), which provided the first ground-based aerosol measurements from a regional-scale station network. The sulfate data were analyzed for two air pollution episode cases. The results of the analysis indicate that the key considerations required for episode mapping from satellite sensors are the following: (1) detection of sulfate levels exceeding 20 micron-g/cu m; (2) capability to view a broad area (of the order of 1500 km swath) because of regional extent of pollution episodes; (3) spatial resolution sufficient to detect variations in sulfate levels of greater than 10 micron-g/cu m over distances of the order of 50 to 75 km; (4) repeat coverage at least on a daily basis; and (5) satellite observations during the mid to late morning local time, when the sulfate levels have begun to increase after the early morning minimum levels, and convective-type cloud cover has not yet increased to the amount reached later in the afternoon. Analysis of the satellite imagery shows that convective clouds can obscure haze patterns. Additional parameters based on spectral analysis include wavelength and bandwidth requirements.

Evaluation of MPEG-7-Based Audio Descriptors for Animal Voice Recognition over Wireless Acoustic Sensor Networks.

PubMed

Luque, Joaquín; Larios, Diego F; Personal, Enrique; Barbancho, Julio; León, Carlos

2016-05-18

Environmental audio monitoring is a huge area of interest for biologists all over the world. This is why some audio monitoring system have been proposed in the literature, which can be classified into two different approaches: acquirement and compression of all audio patterns in order to send them as raw data to a main server; or specific recognition systems based on audio patterns. The first approach presents the drawback of a high amount of information to be stored in a main server. Moreover, this information requires a considerable amount of effort to be analyzed. The second approach has the drawback of its lack of scalability when new patterns need to be detected. To overcome these limitations, this paper proposes an environmental Wireless Acoustic Sensor Network architecture focused on use of generic descriptors based on an MPEG-7 standard. These descriptors demonstrate it to be suitable to be used in the recognition of different patterns, allowing a high scalability. The proposed parameters have been tested to recognize different behaviors of two anuran species that live in Spanish natural parks; the Epidalea calamita and the Alytes obstetricans toads, demonstrating to have a high classification performance.

Spherical Primary Optical Telescope (SPOT): An Architecture Demonstration for Cost-effective Large Space Telescopes

NASA Technical Reports Server (NTRS)

Feinberg, Lee D.; Hagopian, John; Budinoff, Jason; Dean, Bruce; Howard, Joe

2004-01-01

This paper summarizes efforts underway at the Goddard Space Flight Center to demonstrate a new type of space telescope architecture that builds on the rigid segmented telescope heritage of the James Webb Space Telescope but that solves several key challenges for future space telescopes. The architecture is based on a cost-effective segmented spherical primary mirror combined with a unique wavefront sensing and control system that allows for continuous phasing of the primary mirror. The segmented spherical primary allows for cost-effective 3-meter class (e.g., Midex and Discovery) missions as well as enables 30-meter telescope solutions that can be manufactured in a reasonable amount of time and for a reasonable amount of money. The continuous wavefront sensing and control architecture enables missions in low-earth-orbit and missions that do not require expensive stable structures and thermal control systems. For the 30-meter class applications, the paper discusses considerations for assembling and testing the telescopes in space. The paper also summarizes the scientific and technological roadmap for the architecture and also gives an overview of technology development, design studies, and testbed activities underway to demonstrate its feasibility.

Nutritional, Economic, and Environmental Costs of Milk Waste in a Classroom School Breakfast Program.

PubMed

Blondin, Stacy A; Cash, Sean B; Goldberg, Jeanne P; Griffin, Timothy S; Economos, Christina D

2017-04-01

To measure fluid milk waste in a US School Breakfast in the Classroom Program and estimate its nutritional, economic, and environmental effects. Fluid milk waste was directly measured on 60 elementary school classroom days in a medium-sized, urban district. The US Department of Agriculture nutrition database, district cost data, and carbon dioxide equivalent (CO 2 e) emissions and water footprint estimates for fluid milk were used to calculate the associated nutritional, economic, and environmental costs. Of the total milk offered to School Breakfast Program participants, 45% was wasted. A considerably smaller portion of served milk was wasted (26%). The amount of milk wasted translated into 27% of vitamin D and 41% of calcium required of School Breakfast Program meals. The economic and environmental costs amounted to an estimated $274 782 (16% of the district's total annual School Breakfast Program food expenditures), 644 893 kilograms of CO 2 e, and 192 260 155 liters of water over the school year in the district. These substantial effects of milk waste undermine the School Breakfast Program's capacity to ensure short- and long-term food security and federal food waste reduction targets. Interventions that reduce waste are urgently needed.

Evaluation of MPEG-7-Based Audio Descriptors for Animal Voice Recognition over Wireless Acoustic Sensor Networks

PubMed Central

Luque, Joaquín; Larios, Diego F.; Personal, Enrique; Barbancho, Julio; León, Carlos

2016-01-01

Environmental audio monitoring is a huge area of interest for biologists all over the world. This is why some audio monitoring system have been proposed in the literature, which can be classified into two different approaches: acquirement and compression of all audio patterns in order to send them as raw data to a main server; or specific recognition systems based on audio patterns. The first approach presents the drawback of a high amount of information to be stored in a main server. Moreover, this information requires a considerable amount of effort to be analyzed. The second approach has the drawback of its lack of scalability when new patterns need to be detected. To overcome these limitations, this paper proposes an environmental Wireless Acoustic Sensor Network architecture focused on use of generic descriptors based on an MPEG-7 standard. These descriptors demonstrate it to be suitable to be used in the recognition of different patterns, allowing a high scalability. The proposed parameters have been tested to recognize different behaviors of two anuran species that live in Spanish natural parks; the Epidalea calamita and the Alytes obstetricans toads, demonstrating to have a high classification performance. PMID:27213375

Spherical Primary Optical Telescope (SPOT): An Architecture Demonstration for Cost-effective Large Space Telescopes

NASA Technical Reports Server (NTRS)

Feinberg, Lee; Hagopian, John; Budinoff, Jason; Dean, Bruce; Howard, Joe

2005-01-01

This paper summarizes efforts underway at the Goddard Space Flight Center to demonstrate a new type of space telescope architecture that builds on the rigid, segmented telescope heritage of the James Webb Space Telescope but that solves several key challenges for future space telescopes. The architecture is based on a cost-effective segmented spherical primary mirror combined with a unique wavefront sensing and control system that allows for continuous phasing of the primary mirror. The segmented spherical primary allows for cost-effective 3-meter class (eg, Midex and Discovery) missions as well as enables 30-meter telescope solutions that can be manufactured in a reasonable amount of time and for a reasonable amount of money. The continuous wavefront sensing and control architecture enables missions in low-earth-orbit and missions that do not require expensive stable structures and thermal control systems. For the 30-meter class applications, the paper discusses considerations for assembling and testing the telescopes in space. The paper also summarizes the scientific and technological roadmap for the architecture and also gives an overview of technology development, design studies, and testbed activities underway to demonstrate it s feasibility.

Spectrum analysis on quality requirements consideration in software design documents.

PubMed

Kaiya, Haruhiko; Umemura, Masahiro; Ogata, Shinpei; Kaijiri, Kenji

2013-12-01

Software quality requirements defined in the requirements analysis stage should be implemented in the final products, such as source codes and system deployment. To guarantee this meta-requirement, quality requirements should be considered in the intermediate stages, such as the design stage or the architectural definition stage. We propose a novel method for checking whether quality requirements are considered in the design stage. In this method, a technique called "spectrum analysis for quality requirements" is applied not only to requirements specifications but also to design documents. The technique enables us to derive the spectrum of a document, and quality requirements considerations in the document are numerically represented in the spectrum. We can thus objectively identify whether the considerations of quality requirements in a requirements document are adapted to its design document. To validate the method, we applied it to commercial software systems with the help of a supporting tool, and we confirmed that the method worked well.

45 CFR 150.323 - Determining the amount of penalty-other matters as justice may require.

Code of Federal Regulations, 2010 CFR

2010-10-01

... REQUIREMENTS RELATING TO HEALTH CARE ACCESS CMS ENFORCEMENT IN GROUP AND INDIVIDUAL INSURANCE MARKETS CMS... Determining the amount of penalty—other matters as justice may require. CMS may take into account other...

The Database Query Support Processor (QSP)

NASA Technical Reports Server (NTRS)

1993-01-01

The number and diversity of databases available to users continues to increase dramatically. Currently, the trend is towards decentralized, client server architectures that (on the surface) are less expensive to acquire, operate, and maintain than information architectures based on centralized, monolithic mainframes. The database query support processor (QSP) effort evaluates the performance of a network level, heterogeneous database access capability. Air Force Material Command's Rome Laboratory has developed an approach, based on ANSI standard X3.138 - 1988, 'The Information Resource Dictionary System (IRDS)' to seamless access to heterogeneous databases based on extensions to data dictionary technology. To successfully query a decentralized information system, users must know what data are available from which source, or have the knowledge and system privileges necessary to find out this information. Privacy and security considerations prohibit free and open access to every information system in every network. Even in completely open systems, time required to locate relevant data (in systems of any appreciable size) would be better spent analyzing the data, assuming the original question was not forgotten. Extensions to data dictionary technology have the potential to more fully automate the search and retrieval for relevant data in a decentralized environment. Substantial amounts of time and money could be saved by not having to teach users what data resides in which systems and how to access each of those systems. Information describing data and how to get it could be removed from the application and placed in a dedicated repository where it belongs. The result simplified applications that are less brittle and less expensive to build and maintain. Software technology providing the required functionality is off the shelf. The key difficulty is in defining the metadata required to support the process. The database query support processor effort will provide quantitative data on the amount of effort required to implement an extended data dictionary at the network level, add new systems, adapt to changing user needs, and provide sound estimates on operations and maintenance costs and savings.

Transparent Electrodes Based on Silver Nanowire Networks: From Physical Considerations towards Device Integration

PubMed Central

Bellet, Daniel; Lagrange, Mélanie; Sannicolo, Thomas; Aghazadehchors, Sara; Nguyen, Viet Huong; Langley, Daniel P.; Muñoz-Rojas, David; Jiménez, Carmen; Bréchet, Yves; Nguyen, Ngoc Duy

2017-01-01

The past few years have seen a considerable amount of research devoted to nanostructured transparent conducting materials (TCM), which play a pivotal role in many modern devices such as solar cells, flexible light-emitting devices, touch screens, electromagnetic devices, and flexible transparent thin film heaters. Currently, the most commonly used TCM for such applications (ITO: Indium Tin oxide) suffers from two major drawbacks: brittleness and indium scarcity. Among emerging transparent electrodes, silver nanowire (AgNW) networks appear to be a promising substitute to ITO since such electrically percolating networks exhibit excellent properties with sheet resistance lower than 10 Ω/sq and optical transparency of 90%, fulfilling the requirements of most applications. In addition, AgNW networks also exhibit very good mechanical flexibility. The fabrication of these electrodes involves low-temperature processing steps and scalable methods, thus making them appropriate for future use as low-cost transparent electrodes in flexible electronic devices. This contribution aims to briefly present the main properties of AgNW based transparent electrodes as well as some considerations relating to their efficient integration in devices. The influence of network density, nanowire sizes, and post treatments on the properties of AgNW networks will also be evaluated. In addition to a general overview of AgNW networks, we focus on two important aspects: (i) network instabilities as well as an efficient Atomic Layer Deposition (ALD) coating which clearly enhances AgNW network stability and (ii) modelling to better understand the physical properties of these networks. PMID:28772931

Quantitative morphology of the vascularisation of organs: A stereological approach illustrated using the cardiac circulation.

PubMed

Mühlfeld, Christian

2014-01-01

The vasculature of the heart is able to adapt to various physiological and pathological stimuli and its failure to do so is well-reflected by the great impact of ischaemic heart disease on personal morbidity and mortality and on the health care systems of industrial countries. Studies on physiological or genetic interventions as well as therapeutic angiogenesis rely on quantitative data to characterize the effects in a statistically robust way. The gold standard for obtaining quantitative morphological data is design-based stereology which allows the estimation of volume, surface area, length and number of blood vessels as well as their thickness, diameter or wall composition. Unfortunately, the use of stereological methods for this purpose is still rare. One of the reasons for this is the fact that the transfer of the theoretical foundations into laboratory practice requires a remarkable amount of considerations before touching the first piece of tissue. These considerations, however, are often based on already acquired experience and are usually not dealt with in stereological review articles. The present article therefore delineates the procedures for estimating the most important characteristics of the cardiac vasculature and highlights potential problems and their practical solutions. Worked examples are used to illustrate the methods and provide examples of the calculations. Hopefully, the considerations and examples contained herein will provide researchers in this field with the necessary equipment to add stereological methods to their study designs. Copyright © 2012 Elsevier GmbH. All rights reserved.

Radiological anatomy - evaluation of integrative education in radiology.

PubMed

Dettmer, S; Schmiedl, A; Meyer, S; Giesemann, A; Pabst, R; Weidemann, J; Wacker, F K; Kirchhoff, T

2013-09-01

Evaluation and analysis of the integrative course "Radiological Anatomy" established since 2007 at the Medical School Hannover (MHH) in comparison with conventional education. Anatomy and radiology are usually taught separately with a considerable time lag. Interdisciplinary teaching of these associated subjects seems logical for several reasons. Therefore, the integrative course "Radiological Anatomy" was established in the second year of medical education, combining these two closely related subjects. This interdisciplinary course was retrospectively evaluated by consideration of a student questionnaire and staff observations. The advantages and disadvantages of integrative teaching in medical education are discussed. The course ratings were excellent (median 1; mean 1.3 on a scale of 1 to 6). This is significantly (p < 0.001) better than the average of all evaluated courses in the respective term (grade 2.8). The course improved the anatomical comprehension (90 %) and the students stated that the topics were relevant for their future medical education (90 %). Furthermore, interest in the subject's anatomy and radiology increased during the course (88 %). According to the students' suggestions the course was enhanced by a visitation in the Department of Radiology and the additional topic central nervous system. Integrative teaching of anatomy and radiology was well received by the students. Both, anatomical and radiological comprehension and the motivation to learn were improved. However, it should be considered, that the amount of work and time required by the teaching staff is considerably increased compared to traditional teaching. © Georg Thieme Verlag KG Stuttgart · New York.

28 CFR 104.41 - Amount of compensation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... claimant is entitled, the Special Master shall take into consideration the harm to the claimant, the facts... claimant may include the financial needs or financial resources of the claimant or the victim's dependents...

25 CFR 214.2 - Sale of leases.

Code of Federal Regulations, 2010 CFR

2010-04-01

... forwarded to the Commissioner of Indian Affairs for consideration by him and the Secretary of the Interior... disapproved through no fault of the lessee, all amounts deposited by him will be promptly refunded. ...

ON CHANGES OF GLYCOGEN CONTENT IN THE SPLEEN LEUKOCYTES DUE TO IRRADIATION AND ANTIGEN EFFECTS (in Russian)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akopova, V.A.

1961-01-01

An investigation was made on 90 white mice subject to x irradiation, using a dose of 335 r (Series I), to vaccination with a brucellosis vaccine (Series II), and to a combined action of these factors (Series III and IV). When the mice received a total irradiation with a dose of 335 r, the leukocytes in the spleen imprints contained a moderate amount of glycogen varying considerably during a fortnight. The x irradiation of the same dose, followed by the action of the brucellosis vaccine, gave rise to an abrupt drop in the glycogen contert of the leukocytes. Under themore » influence of antigen, followed by x irradiation, a considerable amount of glycogen in the leukocytes and the presence of antibodies in the blood were observed. (auth)« less

The quarantine bay 4RC CO/sub 2/ WAG pilot project: A postflood evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsie, J.C.; Moore, J.S.

1988-08-01

This paper reviews the design, implementation, and performance of a miscible CO/sub 2/ water-alternating-gas (WAG) project in a U.S. gulf coast reservoir. The field-test obtained since the inception of the project in Oct. 1981 are presented, and solutions to such operational problems as downhole corrosion are discussed. Remarkable project response and recovery demonstrated that the CO/sub 2/ WAG process is technically viable for mobilizing considerable amounts of residual oil from watered-out Miocene reservoirs. A 16.9% recovery or original oil in place (OOIP) was obtained with a CO/sub 2/ slug size of 18.9% original HCPV. The CO/sub 2/ requirement was 2.57more » Mcf/bbl (458 m/sup 3//m/sup 3/) of oil recovered.« less

The Quarantine Bay 4RC CO/sub 2/-WAG pilot project: A post-flood evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsie, J.C.; Moore, J.S.

1986-01-01

This paper reviews the design, implementation, and performance of a miscible CO/sub 2/ - WAG (water-alternating-gas) project in a Gulf Coast reservoir. The field test data obtained since the inception of the project in October 1981 are presented, and solutions to operational problems such as downhole corrosion are discussed. Remarkable project response and recovery demonstrated that the CO/sub 2/-WAG process is technically viable for mobilizing considerable amounts of residual oil from watered-out Miocene reservoirs. A 14.7% recovery of original-oil-in-place (OOIP) was obtained using a CO/sub 2/ slug size of 18.9% original hydrocarbon pore volume (HCPV). The CO/sub 2/ requirement wasmore » 2.95 Mcf/bbl (531 m/sup 3//m/sup 3/) of oil recovered.« less

[Clinical application of iodine 123 with special consideration of radionuclide purity, measuring accuracy and radiation dose(author's dose)].

PubMed

Hermann, H J; Ammon, J; Winkel, K z; Haubold, U

1975-05-01

Iodine 123 is a nearly "ideal" radionuclide for thyroid imaging. The production of Iodine 123 requires cyclotrons or accelerators. The production of multicurie amounts of Iodine 123 has been suggested through the use of high-energy accelerators (less than 60 MeV). Most of the methods for the production of Iodine 123 using a compact cyclotron result in contamination with f.e. Iodine 124 which reduces the spatial resolution af imagining procedures and increases the radiation dose to the patient. The radiation dose has been calculated for three methods of production. The various contamination with Iodine 124, Iodine 125, and Iodine 126 result in comparable radiation dose of Iodine 131, provided that the time between production and application is more than four half-live-times of Iodine 123.

A Framework for the Design of Effective Graphics for Scientific Visualization

NASA Technical Reports Server (NTRS)

Miceli, Kristina D.

1992-01-01

This proposal presents a visualization framework, based on a data model, that supports the production of effective graphics for scientific visualization. Visual representations are effective only if they augment comprehension of the increasing amounts of data being generated by modern computer simulations. These representations are created by taking into account the goals and capabilities of the scientist, the type of data to be displayed, and software and hardware considerations. This framework is embodied in an assistant-based visualization system to guide the scientist in the visualization process. This will improve the quality of the visualizations and decrease the time the scientist is required to spend in generating the visualizations. I intend to prove that such a framework will create a more productive environment for tile analysis and interpretation of large, complex data sets.

Valorization of Cereal Based Biorefinery Byproducts: Reality and Expectations

PubMed Central

2013-01-01

The growth of the biobased economy will lead to an increase in new biorefinery activities. All biorefineries face the regular challenges of efficiently and economically treating their effluent to be compatible with local discharge requirements and to minimize net water consumption. The amount of wastes resulting from biorefineries industry is exponentially growing. The valorization of such wastes has drawn considerable attention with respect to resources with an observable economic and environmental concern. This has been a promising field which shows great prospective toward byproduct usage and increasing value obtained from the biorefinery. However, full-scale realization of biorefinery wastes valorization is not straightforward because several microbiological, technological and economic challenges need to be resolved. In this review we considered valorization options for cereals based biorefineries wastes while identifying their challenges and exploring the opportunities for future process. PMID:23931701

Valorization of cereal based biorefinery byproducts: reality and expectations.

PubMed

Elmekawy, Ahmed; Diels, Ludo; De Wever, Heleen; Pant, Deepak

2013-08-20

The growth of the biobased economy will lead to an increase in new biorefinery activities. All biorefineries face the regular challenges of efficiently and economically treating their effluent to be compatible with local discharge requirements and to minimize net water consumption. The amount of wastes resulting from biorefineries industry is exponentially growing. The valorization of such wastes has drawn considerable attention with respect to resources with an observable economic and environmental concern. This has been a promising field which shows great prospective toward byproduct usage and increasing value obtained from the biorefinery. However, full-scale realization of biorefinery wastes valorization is not straightforward because several microbiological, technological and economic challenges need to be resolved. In this review we considered valorization options for cereals based biorefineries wastes while identifying their challenges and exploring the opportunities for future process.

Predicting drug hydrolysis based on moisture uptake in various packaging designs.

PubMed

Naversnik, Klemen; Bohanec, Simona

2008-12-18

An attempt was made to predict the stability of a moisture sensitive drug product based on the knowledge of the dependence of the degradation rate on tablet moisture. The moisture increase inside a HDPE bottle with the drug formulation was simulated with the sorption-desorption moisture transfer model, which, in turn, allowed an accurate prediction of the drug degradation kinetics. The stability prediction, obtained by computer simulation, was made in a considerably shorter time frame and required little resources compared to a conventional stability study. The prediction was finally upgraded to a stochastic Monte Carlo simulation, which allowed quantitative incorporation of uncertainty, stemming from various sources. The resulting distribution of the outcome of interest (amount of degradation product at expiry) is a comprehensive way of communicating the result along with its uncertainty, superior to single-value results or confidence intervals.

Strategies for teaching object-oriented concepts with Java

NASA Astrophysics Data System (ADS)

Sicilia, Miguel-Ángel

2006-03-01

A considerable amount of experiences in teaching object-oriented concepts using the Java language have been reported to date, some of which describe language pitfalls and concrete learning difficulties. In this paper, a number of additional issues that have been experienced as difficult for students to master, along with approaches intended to overcome them, are addressed. Concretely, practical issues regarding associations, interfaces, genericity and exceptions are described. These issues suggest that more emphasis is required on presenting Java programs as derivations of conceptual models, in order to guarantee that a thorough design of the object structure actually precedes implementation issues. In addition, common student misunderstandings about the uses of interfaces and exceptions point to the necessity of introducing both specific design philosophies and also a clear distinction between design-for-reuse and more specific implementation issues.

Cryptography in the Bounded-Quantum-Storage Model

NASA Astrophysics Data System (ADS)

Schaffner, Christian

2007-09-01

This thesis initiates the study of cryptographic protocols in the bounded-quantum-storage model. On the practical side, simple protocols for Rabin Oblivious Transfer, 1-2 Oblivious Transfer and Bit Commitment are presented. No quantum memory is required for honest players, whereas the protocols can only be broken by an adversary controlling a large amount of quantum memory. The protocols are efficient, non-interactive and can be implemented with today's technology. On the theoretical side, new entropic uncertainty relations involving min-entropy are established and used to prove the security of protocols according to new strong security definitions. For instance, in the realistic setting of Quantum Key Distribution (QKD) against quantum-memory-bounded eavesdroppers, the uncertainty relation allows to prove the security of QKD protocols while tolerating considerably higher error rates compared to the standard model with unbounded adversaries.

Effect of purity on adsorption capacities of a Mars-like clay mineral at different pressures

NASA Technical Reports Server (NTRS)

Jenkins, Traci; Mcdoniel, Bridgett; Bustin, Roberta; Allton, Judith H.

1992-01-01

There has been considerable interest in adsorption of carbon dioxide on Marslike clay minerals. Some estimates of the carbon dioxide reservoir capacity of the martian regolith were calculated from the amount of carbon dioxide adsorbed on the ironrich smectite nontronite under martian conditions. The adsorption capacity of pure nontronite could place upper limits on the regolith carbon dioxide reservoir, both at present martian atmospheric pressure and at the postulated higher pressures required to permit liquid water on the surface. Adsorption of carbon dioxide on a Clay Mineral Society standard containing nontronite was studied over a wide range of pressures in the absence of water. Similar experiments were conducted on the pure nontronite extracted from the natural sample. Heating curves were obtained to help characterize and determine the purity of the clay sample.

Uptake and output of various forms of choline by organs of the conscious chronically catheterized sheep.

PubMed Central

Robinson, B S; Snoswell, A M; Runciman, W B; Upton, R N

1984-01-01

The net uptake and output of plasma unesterified choline, glycerophosphocholine, phosphocholine and lipid choline by organs of the conscious chronically catheterized sheep were measured. There was significant production of plasma unesterified choline by the upper- and lower-body regions and the alimentary tract and uptake by the liver, lungs and kidneys. The upper- and lower-body regions drained by the venae cavae provided the bulk (about 82%) of the total body venous return of plasma unesterified choline. Production of plasma unesterified choline by the alimentary tract was approximately balanced by the plasma unesterified choline taken up by the liver, and was almost equal to the amount of choline secreted in the bile. There was a considerable amount of glycerophosphocholine in the liver and there was production of plasma glycerophosphocholine by the liver and uptake by the lungs and kidneys. Glycerophosphocholine was higher in the plasma of sheep than in that of rats. Plasma phosphocholine was produced by the alimentary tract and kidneys. There was production of plasma lipid choline by the upper- and lower-body regions drained by the venae cavae. The results suggest that the sheep synthesizes substantial amounts of choline in ectrahepatic tissues and has the capacity for extensive retention and recycling of bile choline. These observations, coupled with a slow turnover of the endogenous choline body pool, explain the low requirement of sheep for dietary choline in contrast with non-ruminant species. PMID:6696739

Airborne Laser Remote Sensor for Oil Detection and Classification : Engineering Requirements and Technical Considerations Relevant to a Performance Specification

DOT National Transportation Integrated Search

1975-08-01

This report outlines the engineering requirements for an Airborne Laser Remote Sensor for Oil Detection and Classification System. Detailed engineering requirements are given for the major units of the system. Technical considerations pertinent to a ...

10 CFR 140.12 - Amount of financial protection required for other reactors.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Amount of financial protection required for other reactors... reactors. (a) Each licensee is required to have and maintain financial protection for each nuclear reactor... of financial protection required for any nuclear reactor under this section be less than $4,500,000...

10 CFR 140.12 - Amount of financial protection required for other reactors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Amount of financial protection required for other reactors... reactors. (a) Each licensee is required to have and maintain financial protection for each nuclear reactor... of financial protection required for any nuclear reactor under this section be less than $4,500,000...

Age differences in risky choice: a meta-analysis

PubMed Central

Mata, Rui; Josef, Anika K.; Samanez-Larkin, Gregory R.; Hertwig, Ralph

2012-01-01

Does risk taking change as a function of age? We conducted a systematic literature search and found 29 comparisons between younger and older adults on behavioral tasks thought to measure risk taking (N =4,093). The reports relied on various tasks differing in several respects, such as the amount of learning required or the choice framing (gains vs. losses). The results suggest that age-related differences vary considerably as a function of task characteristics, in particular the learning requirements of the task. In decisions from experience, age-related differences in risk taking were a function of decreased learning performance: older adults were more risk seeking compared to younger adults when learning led to risk-avoidant behavior, but were more risk averse when learning led to risk-seeking behavior. In decisions from description, younger adults and older adults showed similar risk-taking behavior for the majority of the tasks, and there were no clear age-related differences as a function of gain/loss framing. We discuss limitations and strengths of past research and provide suggestions for future work on age-related differences in risk taking. PMID:22023565

Rapid protein concentration, efficient fluorescence labeling and purification on a micro/nanofluidics chip.

PubMed

Wang, Chen; Ouyang, Jun; Ye, De-Kai; Xu, Jing-Juan; Chen, Hong-Yuan; Xia, Xing-Hua

2012-08-07

Fluorescence analysis has proved to be a powerful detection technique for achieving single molecule analysis. However, it usually requires the labeling of targets with bright fluorescent tags since most chemicals and biomolecules lack fluorescence. Conventional fluorescence labeling methods require a considerable quantity of biomolecule samples, long reaction times and extensive chromatographic purification procedures. Herein, a micro/nanofluidics device integrating a nanochannel in a microfluidics chip has been designed and fabricated, which achieves rapid protein concentration, fluorescence labeling, and efficient purification of product in a miniaturized and continuous manner. As a demonstration, labeling of the proteins bovine serum albumin (BSA) and IgG with fluorescein isothiocyanate (FITC) is presented. Compared to conventional methods, the present micro/nanofluidics device performs about 10(4)-10(6) times faster BSA labeling with 1.6 times higher yields due to the efficient nanoconfinement effect, improved mass, and heat transfer in the chip device. The results demonstrate that the present micro/nanofluidics device promises rapid and facile fluorescence labeling of small amount of reagents such as proteins, nucleic acids and other biomolecules with high efficiency.

Applications of nuclear power to lunar and Mars missions

NASA Technical Reports Server (NTRS)

Friedlander, Alan; Cole, Kevin

1988-01-01

The initial elements of an ambitious program for human exploration beyond Earth have been developed and presented to NASA management for its consideration. The Outpost on the Moon and Humans to Mars are two key U.S. programs (Ride 1987). A major space goal of this magnitude can only be implemented by a series of program phases evolving from precursor robotic missions, to initial development of temporary surface stations and buildup of operational experience, through the eventual establishment of permanent and sustained surface bases. Each phase of the separate (or linked) lunar and Mars scenarios will require distinctly different levels and types of power sources to support both transportation and on-surface operations, i.e., the nuclear power reactor. Discussed are the respective types and specific amounts of power required for all major systems in a phased program of lunar and Mars exploration over the period 1990 to 2040. A comparative assessment of technology tradeoffs and special design problems is made to ascertain the most appropriate application for the different phases, as well as to identify synergistic developments across the programs.

Evaluation of Algorithms for Compressing Hyperspectral Data

NASA Technical Reports Server (NTRS)

Cook, Sid; Harsanyi, Joseph; Faber, Vance

2003-01-01

With EO-1 Hyperion in orbit NASA is showing their continued commitment to hyperspectral imaging (HSI). As HSI sensor technology continues to mature, the ever-increasing amounts of sensor data generated will result in a need for more cost effective communication and data handling systems. Lockheed Martin, with considerable experience in spacecraft design and developing special purpose onboard processors, has teamed with Applied Signal & Image Technology (ASIT), who has an extensive heritage in HSI spectral compression and Mapping Science (MSI) for JPEG 2000 spatial compression expertise, to develop a real-time and intelligent onboard processing (OBP) system to reduce HSI sensor downlink requirements. Our goal is to reduce the downlink requirement by a factor > 100, while retaining the necessary spectral and spatial fidelity of the sensor data needed to satisfy the many science, military, and intelligence goals of these systems. Our compression algorithms leverage commercial-off-the-shelf (COTS) spectral and spatial exploitation algorithms. We are currently in the process of evaluating these compression algorithms using statistical analysis and NASA scientists. We are also developing special purpose processors for executing these algorithms onboard a spacecraft.

FPGA-based architecture for real-time data reduction of ultrasound signals.

PubMed

Soto-Cajiga, J A; Pedraza-Ortega, J C; Rubio-Gonzalez, C; Bandala-Sanchez, M; Romero-Troncoso, R de J

2012-02-01

This paper describes a novel method for on-line real-time data reduction of radiofrequency (RF) ultrasound signals. The approach is based on a field programmable gate array (FPGA) system intended mainly for steel thickness measurements. Ultrasound data reduction is desirable when: (1) direct measurements performed by an operator are not accessible; (2) it is required to store a considerable amount of data; (3) the application requires measuring at very high speeds; and (4) the physical space for the embedded hardware is limited. All the aforementioned scenarios can be present in applications such as pipeline inspection where data reduction is traditionally performed on-line using pipeline inspection gauges (PIG). The method proposed in this work consists of identifying and storing in real-time only the time of occurrence (TOO) and the maximum amplitude of each echo present in a given RF ultrasound signal. The method is tested with a dedicated immersion system where a significant data reduction with an average of 96.5% is achieved. Copyright © 2011 Elsevier B.V. All rights reserved.

Mutational analysis of the glycosylphosphatidylinositol (GPI) anchor pathway demonstrates that GPI-anchored proteins are required for cell wall biogenesis and normal hyphal growth in Neurospora crassa.

PubMed

Bowman, Shaun M; Piwowar, Amy; Al Dabbous, Mash'el; Vierula, John; Free, Stephen J

2006-03-01

Using mutational and proteomic approaches, we have demonstrated the importance of the glycosylphosphatidylinositol (GPI) anchor pathway for cell wall synthesis and integrity and for the overall morphology of the filamentous fungus Neurospora crassa. Mutants affected in the gpig-1, gpip-1, gpip-2, gpip-3, and gpit-1 genes, which encode components of the N. crassa GPI anchor biosynthetic pathway, have been characterized. GPI anchor mutants exhibit colonial morphologies, significantly reduced rates of growth, altered hyphal growth patterns, considerable cellular lysis, and an abnormal "cell-within-a-cell" phenotype. The mutants are deficient in the production of GPI-anchored proteins, verifying the requirement of each altered gene for the process of GPI-anchoring. The mutant cell walls are abnormally weak, contain reduced amounts of protein, and have an altered carbohydrate composition. The mutant cell walls lack a number of GPI-anchored proteins, putatively involved in cell wall biogenesis and remodeling. From these studies, we conclude that the GPI anchor pathway is critical for proper cell wall structure and function in N. crassa.

The adaption and use of research codes for performance assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liebetrau, A.M.

1987-05-01

Models of real-world phenomena are developed for many reasons. The models are usually, if not always, implemented in the form of a computer code. The characteristics of a code are determined largely by its intended use. Realizations or implementations of detailed mathematical models of complex physical and/or chemical processes are often referred to as research or scientific (RS) codes. Research codes typically require large amounts of computing time. One example of an RS code is a finite-element code for solving complex systems of differential equations that describe mass transfer through some geologic medium. Considerable computing time is required because computationsmore » are done at many points in time and/or space. Codes used to evaluate the overall performance of real-world physical systems are called performance assessment (PA) codes. Performance assessment codes are used to conduct simulated experiments involving systems that cannot be directly observed. Thus, PA codes usually involve repeated simulations of system performance in situations that preclude the use of conventional experimental and statistical methods. 3 figs.« less

21 CFR 25.20 - Actions requiring preparation of an environmental assessment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Actions requiring preparation of an environmental assessment. 25.20 Section 25.20 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ENVIRONMENTAL IMPACT CONSIDERATIONS Agency Actions Requiring Environmental Consideration...

43 CFR 26.9 - Consideration and criteria for awarding grants.

Code of Federal Regulations, 2010 CFR

2010-10-01

... consider the following: (a) The amount of grant funds allocated to the State. (b) The quality of the proposed program in terms of meeting program characteristics and objectives. (c) The overall cost per...

Fluctuations in energy loss and their implications for dosimetry and radiobiology

NASA Technical Reports Server (NTRS)

Baily, N. A.; Steigerwalt, J. E.

1972-01-01

Serious consideration of the physics of energy deposition indicates that a fundamental change in the interpretation of absorbed dose is required at least for considerations of effects in biological systems. In addition, theoretical approaches to radiobiology and microdosimetry seem to require statistical considerations incorporating frequency distributions of the magnitude of the event sizes within the volume of interest.

Financing the Air Transportation Industry

NASA Technical Reports Server (NTRS)

Lloyd-Jones, D. J.

1972-01-01

The basic characteristics of the air transportation industry are outlined and it is shown how they affect financing requirements and patterns of production. The choice of financial timing is imperative in order to get the best interest rates available and to insure a fair return to investors. The fact that the industry cannot store its products has a fairly major effect on the amount of equipment to purchase, the amount of capital investment required, and the amount of return required to offset industry depriciation.

26 CFR 1.665(c)-1 - Accumulation distributions of certain foreign trusts; in general.

Code of Federal Regulations, 2010 CFR

2010-04-01

... below zero) by the amount of income required to be distributed currently. (In computing the amount of an... distributable net income reduced (but not below zero) by the amount required to be distributed currently. This... unless there is undistributed net income in at least one of the preceding taxable years which began after...

[Periods for growth and quality improvement of fish in context of animal welfare compliant management of commercial fish ponds--a literature review].

PubMed

Pietrock, Michael; Brämick, Uwe

2016-01-01

In Germany, management of commercial fish ponds requires consideration of animal welfare legislation. In particular, it is forbidden to immediately catch fish that have recently been stocked into put-and-take fishponds. Rather, after stocking is completed, a short-term fishing ban period needs to be adhered to that allows the fishes the opportunity to grow and/or significantly improve in overall quality. The duration of the fishing ban varies considerably among German federal states. A literature review, therefore, was undertaken to identify the amount of time required by adult fish to reach changes in various parameters of quality (proximate composition, fillet colour, odour/taste, stress response), and growth.The literature search revealed that some of the selected parameters (odour/taste, stress response) can change within 24 hours, potentially resulting in improved fish flesh quality. With a time span of about four weeks, feeding-induced changes in proximate composition took the longest among the parameters tested to realize significant changes in fish flesh quality. Transportation-related reductions in body mass are overcome and succeeded by net growth within one to two weeks depending on food availability. Maintaining the fish under species-specific conditions and providing the optimal environment to meet their physiological demands, however, are critical prerequisites for growth and quality improvement. In conclusion there is science-based justification for fishing ban periods ranging from 24 hours to four weeks. Final determination of its duration, therefore, remains a careful balancing of values.

Determining the amount of waste plastics in the feed of Austrian waste-to-energy facilities

PubMed Central

Schwarzböck, Therese; Van Eygen, Emile; Rechberger, Helmut; Fellner, Johann

2016-01-01

Although thermal recovery of waste plastics is widely practiced in many European countries, reliable information on the amount of waste plastics in the feed of waste-to-energy plants is rare. In most cases the amount of plastics present in commingled waste, such as municipal solid waste, commercial, or industrial waste, is estimated based on a few waste sorting campaigns, which are of limited significance with regard to the characterisation of plastic flows. In the present study, an alternative approach, the so-called Balance Method, is used to determine the total amount of plastics thermally recovered in Austria’s waste incineration facilities in 2014. The results indicate that the plastics content in the waste feed may vary considerably among different plants but also over time. Monthly averages determined range between 8 and 26 wt% of waste plastics. The study reveals an average waste plastics content in the feed of Austria’s waste-to-energy plants of 16.5 wt%, which is considerably above findings from sorting campaigns conducted in Austria. In total, about 385 kt of waste plastics were thermally recovered in all Austrian waste-to-energy plants in 2014, which equals to 45 kg plastics cap-1. In addition, the amount of plastics co-combusted in industrial plants yields a total thermal utilisation rate of 70 kg cap-1 a-1 for Austria. This is significantly above published rates, for example, in Germany reported rates for 2013 are in the range of only 40 kg of waste plastics combusted per capita. PMID:27474393

Determining the amount of waste plastics in the feed of Austrian waste-to-energy facilities.

PubMed

Schwarzböck, Therese; Van Eygen, Emile; Rechberger, Helmut; Fellner, Johann

2017-02-01

Although thermal recovery of waste plastics is widely practiced in many European countries, reliable information on the amount of waste plastics in the feed of waste-to-energy plants is rare. In most cases the amount of plastics present in commingled waste, such as municipal solid waste, commercial, or industrial waste, is estimated based on a few waste sorting campaigns, which are of limited significance with regard to the characterisation of plastic flows. In the present study, an alternative approach, the so-called Balance Method, is used to determine the total amount of plastics thermally recovered in Austria's waste incineration facilities in 2014. The results indicate that the plastics content in the waste feed may vary considerably among different plants but also over time. Monthly averages determined range between 8 and 26 wt% of waste plastics. The study reveals an average waste plastics content in the feed of Austria's waste-to-energy plants of 16.5 wt%, which is considerably above findings from sorting campaigns conducted in Austria. In total, about 385 kt of waste plastics were thermally recovered in all Austrian waste-to-energy plants in 2014, which equals to 45 kg plastics cap -1 . In addition, the amount of plastics co-combusted in industrial plants yields a total thermal utilisation rate of 70 kg cap -1  a -1 for Austria. This is significantly above published rates, for example, in Germany reported rates for 2013 are in the range of only 40 kg of waste plastics combusted per capita.

Procrastination, consideration of future consequences, and episodic future thinking.

PubMed

Rebetez, Marie My Lien; Barsics, Catherine; Rochat, Lucien; D'Argembeau, Arnaud; Van der Linden, Martial

2016-05-01

Despite the intrinsic temporal nature of procrastination, little research has examined the link between this form of self-regulatory failure and the consideration of future consequences, and no study has addressed the link between procrastination and episodic future thinking. The aim of the present study was to explore these relationships. Participants were asked to project themselves into possible future events and to rate the amount of sensory-perceptual details and autonoetic consciousness associated with their representations. They were also asked to complete questionnaires that assessed procrastination, the consideration of future consequences, and negative affect. Results showed that both the consideration of future consequences and episodic future thinking were associated with procrastination, and in particular with procrastination-related decision making abilities and procrastination-related motivational dispositions, respectively. Copyright © 2016 Elsevier Inc. All rights reserved.

36 CFR Appendix A to Part 72 - Criteria for Eligibility

Code of Federal Regulations, 2012 CFR

2012-07-01

... Income 1969-75 Per capita income is the estimated average amount of total money income per person. It is... senior citizens have adequate incomes, they tend to be considerably less affluent and less mobile than...

36 CFR Appendix A to Part 72 - Criteria for Eligibility

Code of Federal Regulations, 2013 CFR

2013-07-01

... Income 1969-75 Per capita income is the estimated average amount of total money income per person. It is... senior citizens have adequate incomes, they tend to be considerably less affluent and less mobile than...

36 CFR Appendix A to Part 72 - Criteria for Eligibility

Code of Federal Regulations, 2011 CFR

2011-07-01

... Income 1969-75 Per capita income is the estimated average amount of total money income per person. It is... senior citizens have adequate incomes, they tend to be considerably less affluent and less mobile than...

36 CFR Appendix A to Part 72 - Criteria for Eligibility

Code of Federal Regulations, 2014 CFR

2014-07-01

... Income 1969-75 Per capita income is the estimated average amount of total money income per person. It is... senior citizens have adequate incomes, they tend to be considerably less affluent and less mobile than...

Dangerous Elements.

ERIC Educational Resources Information Center

Pinkham, Jim

1994-01-01

Discusses legislation currently under consideration that sets standards for the amount of radon, aluminum, and arsenic allowable in drinking water. Considers the economic impact of the legislation and traces the status of the Safe Drinking Water Act Regulations from 1989-92. (MDH)

Idea Bank: Summer Music Programs for Students.

ERIC Educational Resources Information Center

Anderson, Tom; And Others

1989-01-01

Describes the elements of high quality summer music programs for students. Points out considerations for selection of a summer music camp, including setting daily schedule, amount of performance and private lessons, cost, faculty, and program scope. (LS)

Aquacells — Flagellates under long-term microgravity and potential usage for life support systems

NASA Astrophysics Data System (ADS)

Häder, Donat-P.; Richter, Peter R.; Strauch, S. M.; Schuster, M.

2006-09-01

The motile behavior of the unicellular photosynthetic flagellate Euglena gracilis was studied during a two-week mission on the Russian satellite Foton M2. The precision of gravitactic orientation was high before launch and, as expected, the cells were unoriented during microgravity. While after previous short-term TEXUS flights the precision of orientation was as high as before launch, it took several hours for the organisms to regain their gravitaxis. Also the percentage of motile cells and the swimming velocity of the remaining motile cells were considerably lower than in the ground control. In preparatory experiments the flagellate Euglena was shown to produce considerable amounts of photosynthetically generated oxygen. In a coupling experiment in a prototype for a planned space mission on Foton M3, the photosynthetic producers were shown to supply sufficient amounts of oxygen to a fish compartment with 35 larval cichlids, Oreochromis mossambicus.

A method for calculating minimum biodiversity offset multipliers accounting for time discounting, additionality and permanence

PubMed Central

Laitila, Jussi; Moilanen, Atte; Pouzols, Federico M

2014-01-01

Biodiversity offsetting, which means compensation for ecological and environmental damage caused by development activity, has recently been gaining strong political support around the world. One common criticism levelled at offsets is that they exchange certain and almost immediate losses for uncertain future gains. In the case of restoration offsets, gains may be realized after a time delay of decades, and with considerable uncertainty. Here we focus on offset multipliers, which are ratios between damaged and compensated amounts (areas) of biodiversity. Multipliers have the attraction of being an easily understandable way of deciding the amount of offsetting needed. On the other hand, exact values of multipliers are very difficult to compute in practice if at all possible. We introduce a mathematical method for deriving minimum levels for offset multipliers under the assumption that offsetting gains must compensate for the losses (no net loss offsetting). We calculate absolute minimum multipliers that arise from time discounting and delayed emergence of offsetting gains for a one-dimensional measure of biodiversity. Despite the highly simplified model, we show that even the absolute minimum multipliers may easily be quite large, in the order of dozens, and theoretically arbitrarily large, contradicting the relatively low multipliers found in literature and in practice. While our results inform policy makers about realistic minimal offsetting requirements, they also challenge many current policies and show the importance of rigorous models for computing (minimum) offset multipliers. The strength of the presented method is that it requires minimal underlying information. We include a supplementary spreadsheet tool for calculating multipliers to facilitate application. PMID:25821578

Chest tube drainage of transudative pleural effusions hastens liberation from mechanical ventilation.

PubMed

Kupfer, Yizhak; Seneviratne, Chanaka; Chawla, Kabu; Ramachandran, Kavan; Tessler, Sidney

2011-03-01

Pleural effusions occur frequently in patients requiring mechanical ventilatory support. Treatment of the precipitating cause and resolution of the pleural effusion may take considerable time. We retrospectively studied the effect of chest tube drainage of transudative pleural effusions on the liberation of patients from mechanical ventilatory support. Patients in the medical ICU (MICU) at Maimonides Medical Center between January 1, 2009, and October 31, 2009, requiring mechanical ventilatory support with a transudative pleural effusion, were studied retrospectively. They were divided into two groups: standard care and standard care plus chest tube drainage. Chest tubes were placed under ultrasound guidance by trained intensivists. Duration of mechanical ventilatory support was the primary end point. Secondary end points included measures of oxygenation, amount of fluid drained, and complications associated with the chest tube. A total of 168 patients were studied; 88 were treated with standard care and 80 underwent chest tube drainage. Total duration of mechanical ventilatory support was significantly shorter for patients who had chest tube drainage: 3.8±0.5 days vs 6.5±1.1 days for the standard group (P=.03). No differences in oxygenation were noted between the two groups. The average amount of fluid drained was 1,220 mL. No significant complications were caused by chest tube drainage. Chest tube drainage of transudative pleural effusions resulted in more rapid liberation from mechanical ventilatory support. It is a very safe procedure when performed under ultrasound guidance by experienced personnel. ClinicalTrials.gov; Identifier: NCT0114285; URL: www.clinicaltrials.gov.

LED Device Illuminates New Path to Healing

NASA Technical Reports Server (NTRS)

2008-01-01

Among NASA s research goals is increased understanding of factors affecting plant growth, including the effects of microgravity. Impeding such studies, traditional light sources used to grow plants on Earth are difficult to adapt to space flight, as they require considerable amounts of power and produce relatively large amounts of heat. As such, an optimized experimental system requires much less energy and reduces temperature variance without negatively affecting plant growth results. Ronald W. Ignatius, founder and chairman of the board at Quantum Devices Inc. (QDI), of Barneveld, Wisconsin, proposed using light-emitting diodes (LEDs) as the photon source for plant growth experiments in space. This proposition was made at a meeting held by the Wisconsin Center for Space Automation and Robotics, a NASA-sponsored research center that facilitates the commercialization of robotics, automation, and other advanced technologies. The Wisconsin group teamed with QDI to determine whether an LED system could provide the necessary wavelengths and intensities for photosynthesis, and the resultant system proved successful. The center then produced the Astroculture3, a plant growth chamber that successfully incorporated this LED light source, which has now flown on several space shuttle missions. NASA subsequently identified another need that could be addressed with the use of LEDs: astronaut health. A central concern in astronaut health is maintaining healthy growth of cells, including preventing bone and muscle loss and boosting the body s ability to heal wounds all adversely affected by prolonged weightlessness. Thus, having determined that LEDs can be used to grow plants in space, NASA decided to investigate whether LEDs might be used for photobiomodulation therapy (PBMT).

A mobile asset sharing policy for hospitals with real time locating systems.

PubMed

Demircan-Yıldız, Ece Arzu; Fescioglu-Unver, Nilgun

2016-01-01

Each year, hospitals lose a considerable amount of time and money due to misplaced mobile assets. In addition the assets which remain in departments that frequently use them depreciate early, while other assets of the same type in different departments are rarely used. A real time locating system can prevent these losses when used with appropriate asset sharing policies. This research quantifies the amount of time a medium size hospital saves by using real time locating system and proposes an asset selection rule to eliminate the asset usage imbalance problem. The asset selection rule proposed is based on multi objective optimization techniques. The effectiveness of this rule on asset to patient time and asset utilization rate variance performance measures were tested using discrete event simulation method. Results show that the proposed asset selection rule improved the usage balance significantly. Sensitivity analysis showed that the proposed rule is robust to changes in demand rates and user preferences. Real time locating systems enable saving considerable amount of time in hospitals, and they can still be improved by integrating decision support mechanisms. Combining tracking technology and asset selection rules helps improve healthcare services.

27 CFR 40.133 - Amount of individual bond.

Code of Federal Regulations, 2010 CFR

2010-04-01

... amount, the manufacturer shall immediately file a strengthening or superseding bond as required by this subpart. The amount of any such bond (or the total amount including strengthening bonds, if any) need not...

27 CFR 40.133 - Amount of individual bond.

Code of Federal Regulations, 2011 CFR

2011-04-01

... amount, the manufacturer shall immediately file a strengthening or superseding bond as required by this subpart. The amount of any such bond (or the total amount including strengthening bonds, if any) need not...

Effects of different amounts of exercise on preventing depressive symptoms in community-dwelling older adults: a prospective cohort study in Taiwan.

PubMed

Chang, Yu-Chen; Lu, Mei-Chun; Hu, I-Han; Wu, Wan-Chi Ida; Hu, Susan C

2017-05-02

To compare the effects of four different amounts of exercise for preventing depressive symptoms in community-dwelling older adults. Prospective cohort study. A nationally representative sample in Taiwan. Four waves of the survey 'Taiwan Longitudinal Study on Aging (TLSA)' from 1996 to 2007 were analysed. A total of 2673 older adults aged 65 years and over were recruited. Depressive symptoms were measured using the Center for Epidemiologic Studies Depression Scale (CESD). Four different types/amounts of exercise were examined including: (1) 3 times/week, 15 min/time; (2) 3 times/week, 30 min/time; (3) 6 times/week, 15 min/time; and (4) 6 times/week, 30 min/time. All exercise types were required to have at least moderate intensity. The impacts of different amounts of exercise on depressive symptoms were analysed using generalised linear mixed models. More than one-fifth of the elder individuals under consideration had depressive symptoms (CESD ≥10). About 38.6% of older adults met the lowest criteria for exercise type 1, and fewer (28.0%) met the highest criteria for type 4. Only exercise type 4 in the current survey was initially related to lower depressive symptoms (OR=0.8, 95% CI 0.66 to 0.95). However, after considering the interaction between time and changes in exercise patterns, the results showed that all persistent exercise models, even if a very low amount (3 times/week, 15 min/time), had significantly preventive effects on depressive symptoms (OR=0.56~0.67). Consistent exercise with at least 15 min per time, three times a week of moderate intensity is significantly associated with lower risk of depressive symptoms. This low amount of exercise may be easier to promote at the community and population level than other alternatives. Registry number 104040 of the Institutional Ethics Committee of Chia-Yi Christian Hospital. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Effects of different amounts of exercise on preventing depressive symptoms in community-dwelling older adults: a prospective cohort study in Taiwan

PubMed Central

Chang, Yu-Chen; Lu, Mei-Chun; Hu, I-Han; Wu, Wan-Chi Ida

2017-01-01

Objectives To compare the effects of four different amounts of exercise for preventing depressive symptoms in community-dwelling older adults. Design Prospective cohort study. Setting A nationally representative sample in Taiwan. Participants Four waves of the survey ‘Taiwan Longitudinal Study on Aging (TLSA)’ from 1996 to 2007 were analysed. A total of 2673 older adults aged 65 years and over were recruited. Primary and secondary outcome measures Depressive symptoms were measured using the Center for Epidemiologic Studies Depression Scale (CESD). Four different types/amounts of exercise were examined including: (1) 3 times/week, 15 min/time; (2) 3 times/week, 30 min/time; (3) 6 times/week, 15 min/time; and (4) 6 times/week, 30 min/time. All exercise types were required to have at least moderate intensity. The impacts of different amounts of exercise on depressive symptoms were analysed using generalised linear mixed models. Results More than one-fifth of the elder individuals under consideration had depressive symptoms (CESD ≥10). About 38.6% of older adults met the lowest criteria for exercise type 1, and fewer (28.0%) met the highest criteria for type 4. Only exercise type 4 in the current survey was initially related to lower depressive symptoms (OR=0.8, 95% CI 0.66 to 0.95). However, after considering the interaction between time and changes in exercise patterns, the results showed that all persistent exercise models, even if a very low amount (3 times/week, 15 min/time), had significantly preventive effects on depressive symptoms (OR=0.56~0.67). Conclusion Consistent exercise with at least 15 min per time, three times a week of moderate intensity is significantly associated with lower risk of depressive symptoms. This low amount of exercise may be easier to promote at the community and population level than other alternatives. Trial registration Registry number 104040 of the Institutional Ethics Committee of Chia-Yi Christian Hospital. PMID:28465305

A Hydrothermal Study of Wachusett Reservoir with Considerations of Water Quality Management

DTIC Science & Technology

1989-05-01

of Water Quality Management Techniques 108 1 5.1 Current operational management techniques 108 5.2 Copper toxicity and considerations for algicide ...sulfate (CuSO 4) is applied to the epilimnion of the reservoir. The method of treatment consists of dragging burlap sacks of the algicide crystal through...Figure 5.2 shows the application rate for the Fall of 1987 amounting to over 20 tons of algicide applied for the fall period. In addition to a sampling

Light period regulation of carbohydrate partitioning

NASA Technical Reports Server (NTRS)

Janes, Harry W.

1994-01-01

We have shown that the photosynthetic period is important in regulating carbon partitioning. Even when the same amount of carbon is fixed over a 24h period considerably more is translocated out of the leaf under the longer photosynthetic period. This is extremely important when parts of the plant other than the leaves are to be sold. It is also important to notice the amount of carbon respired in the short photosynthetic period. The light period effect on carbohydrate fixation, dark respiration, and translocation is shown in this report.

Amount of substance and the proposed redefinition of the mole

NASA Astrophysics Data System (ADS)

Milton, M. J. T.; Mills, I. M.

2009-06-01

There has been considerable discussion about the merits of redefining four of the base units of the SI, including the mole. In this paper, the options for implementing a new definition for the mole based on a fixed value for the Avogadro constant are discussed. They are placed in the context of the macroscopic nature of the quantity amount of substance and the opportunity to introduce a system for molar and atomic masses with unchanged values and consistent relative uncertainties.

Environmental durability of electroplated black chromium

NASA Technical Reports Server (NTRS)

Lowery, J. R.

1981-01-01

A study was undertaken to determine the durability of nickel-black chromium plated aluminum in an outdoor rural industrial, and seacoast environment. Test panels were exposed to these environments for 60, 36, and 13 months, respectively. The results of this study showed that no significant optical degradation occurred from exposure to either of these environments, although a considerable amount of corrosion occurred on the panels exposed to the seacoast environment. The rural and industrial atmosphere produced only a slight amount of corrosion on test panels.

Evaluation of transportation microenvironments through assessment of cyclists' exposure to traffic related particulate matter.

DOT National Transportation Integrated Search

2011-03-01

Urban residents spend a considerable amount of outdoor time in transportation microenvironments as pedestrians, bicycle commuters, public transit users, residents and workers situated along roadways, and commuters within vehicles. Within these transp...

Reticuloendotheliosis

USDA-ARS?s Scientific Manuscript database

Reticuloendotheliosis (RE) designates a group of pathologic syndromes in several avian species caused by retroviruses of the reticuloendotheliosis virus (REV) group. In consideration of the increasing amounts of new literature on this virus and the disease, it has not been possible to cite all publi...

Human factors analysis of road weather advisory and control information : final report.

DOT National Transportation Integrated Search

2010-03-31

The amount of available weather information and the methods by which this information can be disseminated to travelers have grown considerably in recent years. This growth includes weather gathering devices (sensors, satellites), models and forecasti...

Integrated Pest Management in Schools Program Brochure

EPA Pesticide Factsheets

Our Nation's children spend a considerable amount of their time in schools, as do teachers and school support staff. EPA is working to reduce the risk that both children and employees experience from pests and pesticides in and around schools.

LIVING SHORES GALLERY MX964015

EPA Science Inventory

An interactive computer kiosk will allow the Texas State Aquarium to deliver a considerable amount of information in an efficient and highly effective manner. Touch screen interactives have proven to be excellent teaching tools in the Aquarium's Jellies: Floating Phantoms galler...

Evaluation of image quality metrics for the prediction of subjective best focus.

PubMed

Kilintari, Marina; Pallikaris, Aristophanis; Tsiklis, Nikolaos; Ginis, Harilaos S

2010-03-01

Seven existing and three new image quality metrics were evaluated in terms of their effectiveness in predicting subjective cycloplegic refraction. Monochromatic wavefront aberrations (WA) were measured in 70 eyes using a Shack-Hartmann based device (Complete Ophthalmic Analysis System; Wavefront Sciences). Subjective cycloplegic spherocylindrical correction was obtained using a standard manifest refraction procedure. The dioptric amount required to optimize each metric was calculated and compared with the subjective refraction result. Metrics included monochromatic and polychromatic variants, as well as variants taking into consideration the Stiles and Crawford effect (SCE). WA measurements were performed using infrared light and converted to visible before all calculations. The mean difference between subjective cycloplegic and WA-derived spherical refraction ranged from 0.17 to 0.36 diopters (D), while paraxial curvature resulted in a difference of 0.68 D. Monochromatic metrics exhibited smaller mean differences between subjective cycloplegic and objective refraction. Consideration of the SCE reduced the standard deviation (SD) of the difference between subjective and objective refraction. All metrics exhibited similar performance in terms of accuracy and precision. We hypothesize that errors pertaining to the conversion between infrared and visible wavelengths rather than calculation method may be the limiting factor in determining objective best focus from near infrared WA measurements.

Biological treatment of thin-film transistor liquid crystal display (TFT-LCD) wastewater using aerobic and anoxic/oxic sequencing batch reactors.

PubMed

Lei, Chin-Nan; Whang, Liang-Ming; Chen, Po-Chun

2010-09-01

The amount of pollutants produced during manufacturing processes of thin-film transistor liquid crystal display (TFT-LCD) substantially increases due to an increasing production of the opto-electronic industry in Taiwan. This study presents the treatment performance of one aerobic and one anoxic/oxic (A/O) sequencing batch reactors (SBRs) treating synthetic TFT-LCD wastewater containing dimethyl sulfoxide (DMSO), monoethanolamine (MEA), and tetra-methyl ammonium hydroxide (TMAH). The long-term monitoring results for the aerobic and A/O SBRs demonstrate that stable biodegradation of DMSO, MEA, and TMAH can be achieved without any considerably adverse impacts. The ammonium released during MEA and TMAH degradation can also be completely oxidized to nitrate through nitrification in both SBRs. Batch studies on biodegradation rates for DMSO, MEA, and TMAH under anaerobic, anoxic, and aerobic conditions indicate that effective MEA degradation can be easily achieved under all three conditions examined, while efficient DMSO and TMAH degradation can be attained only under anaerobic and aerobic conditions, respectively. The potential odor problem caused by the formation of malodorous dimethyl sulfide from DMSO degradation under anaerobic conditions, however, requires insightful consideration in treating DMSO-containing wastewater. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

The revised HSE fatigue guidance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stacey, A.; Sharp, J.V.

1995-12-31

Fatigue cracking has been a principal cause of damage to North Sea structures and consequently considerable attention has been given to the development of guidance for the prediction of fatigue performance. The fatigue guidance of the Offshore Safety Division of the Health and Safety Executive (HSE) was recently revised and published, following a significant offshore industry review in the period 1987 to 1990, and is based on the results of a considerable amount of research and development work on the fatigue behavior of welded tubular and plated joints. As a result of this review, the revised fatigue guidance incorporates severalmore » new clauses and recommendations. The revised recommendations apply to joint classification, basic design S-N curves for welded joints and cast or forged steel components, the thickness effect, the effects of environment and the treatment of low and high stress ranges. Additionally, a new appendix on the derivation of stress concentration factors is included. The new clauses cover high strength steels, bolts and threaded connectors, moorings, repaired joints and the use of fracture mechanics analysis. This paper presents an overview of the revisions to the fatigue guidance, the associated background technical information and aspects of the fatigue behavior of offshore structures which are considered to require further investigation. 67 refs., 7 figs., 8 tabs.« less

Automated tuning of an eight-channel cardiac transceive array at 7 tesla using piezoelectric actuators.

PubMed

Keith, Graeme A; Rodgers, Christopher T; Hess, Aaron T; Snyder, Carl J; Vaughan, J Thomas; Robson, Matthew D

2015-06-01

Ultra-high field (UHF) MR scanning in the body requires novel coil designs due to B1 field inhomogeneities. In the transverse electromagnetic field (TEM) design, maximum B1 transmit power can only be achieved if each individual transmit element is tuned and matched for different coil loads, which requires a considerable amount of valuable scanner time. An integrated system for autotuning a multichannel parallel transmit (pTx) cardiac TEM array was devised, using piezoelectric actuators, power monitoring equipment and control software. The reproducibility and performance of the system were tested and the power responses of the coil elements were profiled. An automated optimization method was devised and evaluated. The time required to tune an eight-element pTx cardiac RF array was reduced from a mean of 30 min to less than 10 min with the use of this system. Piezoelectric actuators are an attractive means of tuning RF coil arrays to yield more efficient B1 transmission into the subject. An automated mechanism for tuning these elements provides a practical solution for cardiac imaging at UHF, bringing this technology closer to clinical use. © 2014 The Authors. Magnetic Resonance in Medicine published by Wiley Periodicals, Inc. on behalf of International Society for Magnetic Resonance in Medicine.

Axial propulsion with flapping and rotating wings, a comparison of potential efficiency.

PubMed

Kroninger, Christopher M

2018-04-18

Interest in biological locomotion and what advantages the principles governing it might offer in the design of manmade vehicles prompts one to consider the power requirements of flapping relative to rotary propulsion. The amount of work performed on the fluid surrounding a thrusting surface (wing or blade) is reflected in the kinetic energy of the wake. Consideration of the energy in the wake is sufficient to define absolute minimum limitations on the power requirement to generate a particular thrust. This work applies wake solutions to compare the minimum inviscid propulsive power requirement of wings flapping and in rotation at wing loading conditions reflective of hover through a state of lightly-loaded cruise. It is demonstrated that hovering flapping flight is less efficient than rotary wing propulsion except for the most extreme flap amplitude strokes ([Formula: see text]   >  160°) if operating at large wake wavelength. In cruise, a larger range of flap amplitude kinematics ([Formula: see text]  >  140°) can be aerodynamically more energy efficient for wake wavelengths reflective of biological propulsion. These results imply, based on the observed wing kinematics of continuous steady flight, that flapping propulsion in animals is unlikely to be more efficient than rotary propulsion.

a Restoration Oriented Hbim System for Cultural Heritage Documentation: the Case Study of Parma Cathedral

NASA Astrophysics Data System (ADS)

Bruno, N.; Roncella, R.

2018-05-01

The need to safeguard and preserve Cultural Heritage (CH) is increasing and especially in Italy, where the amount of historical buildings is considerable, having efficient and standardized processes of CH management and conservation becomes strategic. At the time being, there are no tools capable of fulfilling all the specific functions required by Cultural Heritage documentation and, due to the complexity of historical assets, there are no solution as flexible and customizable as CH specific needs require. Nevertheless, BIM methodology can represent the most effective solution, on condition that proper methodologies, tools and functions are made available. The paper describes an ongoing research on the implementation of a Historical BIM system for the Parma cathedral, aimed at the maintenance, conservation and restoration. Its main goal was to give a concrete answer to the lack of specific tools required by Cultural Heritage documentation: organized and coordinated storage and management of historical data, easy analysis and query, time management, 3D modelling of irregular shapes, flexibility, user-friendliness, etc. The paper will describe the project and the implemented methodology, focusing mainly on survey and modelling phases. In describing the methodology, critical issues about the creation of a HBIM will be highlighted, trying to outline a workflow applicable also in other similar contexts.

Motion Planning of Two Stacker Cranes in a Large-Scale Automated Storage/Retrieval System

NASA Astrophysics Data System (ADS)

Kung, Yiheng; Kobayashi, Yoshimasa; Higashi, Toshimitsu; Ota, Jun

We propose a method for reducing the computational time of motion planning for stacker cranes. Most automated storage/retrieval systems (AS/RSs) are only equipped with one stacker crane. However, this is logistically challenging, and greater work efficiency in warehouses, such as those using two stacker cranes, is required. In this paper, a warehouse with two stacker cranes working simultaneously is proposed. Unlike warehouses with only one crane, trajectory planning in those with two cranes is very difficult. Since there are two cranes working together, a proper trajectory must be considered to avoid collision. However, verifying collisions is complicated and requires a considerable amount of computational time. As transport work in AS/RSs occurs randomly, motion planning cannot be conducted in advance. Planning an appropriate trajectory within a restricted duration would be a difficult task. We thereby address the current problem of motion planning requiring extensive calculation time. As a solution, we propose a “free-step” to simplify the procedure of collision verification and reduce the computational time. On the other hand, we proposed a method to reschedule the order of collision verification in order to find an appropriate trajectory in less time. By the proposed method, we reduce the calculation time to less than 1/300 of that achieved in former research.

Optimizing antibody expression: The nuts and bolts.

PubMed

Ayyar, B Vijayalakshmi; Arora, Sushrut; Ravi, Shiva Shankar

2017-03-01

Antibodies are extensively utilized entities in biomedical research, and in the development of diagnostics and therapeutics. Many of these applications require high amounts of antibodies. However, meeting this ever-increasing demand of antibodies in the global market is one of the outstanding challenges. The need to maintain a balance between demand and supply of antibodies has led the researchers to discover better means and methods for optimizing their expression. These strategies aim to increase the volumetric productivity of the antibodies along with the reduction of associated manufacturing costs. Recent years have witnessed major advances in recombinant protein technology, owing to the introduction of novel cloning strategies, gene manipulation techniques, and an array of cell and vector engineering techniques, together with the progress in fermentation technologies. These innovations were also highly beneficial for antibody expression. Antibody expression depends upon the complex interplay of multiple factors that may require fine tuning at diverse levels to achieve maximum yields. However, each antibody is unique and requires individual consideration and customization for optimizing the associated expression parameters. This review provides a comprehensive overview of several state-of-the-art approaches, such as host selection, strain engineering, codon optimization, gene optimization, vector modification and process optimization that are deemed suitable for enhancing antibody expression. Copyright © 2017 Elsevier Inc. All rights reserved.

Intentional Replantation of an Immature Incisor with a Transverse Root Fracture and Endo-Perio Condition: 4 Year Follow-Up.

PubMed

Oishi, Atsushi

This case report describes the importance of continual examination for dental trauma and the efficacy of intentional replantation with retrograde root canal filling for a transverse root fracture in an immature incisor accompanied by subsequent periodontal-endodontic disease. In the treatment of traumatically fractured roots in immature incisors, continual examination is indispensable for the final diagnosis because roots in immature teeth are less calcified, resulting in less detailed radiological examinations. Thus, common dental trauma complications such as pulp necrosis may appear months after the initial examination. Endodontic treatment for transverse root fracture is mainly determined according to radiographic examination findings; for fractured immature roots, apexification with calcium hydroxide of the coronal fragment is generally applied. However, this method requires removal of considerable amounts of enamel and dentin to allow access to the cavity for preparation, which may increase the risk of future fractures. In contrast, intentional replantation with retrograde root canal filling does not require the removal or long-term application of calcium hydroxide. However, it requires careful extraction of the tooth, maintenance of root wetness during the extraoral procedure, rigid splinting, and oral hygiene control. Management of tooth mobility is also important in the post-replantation course.

A critique of the regulation of data science in healthcare research in the European Union.

PubMed

Rumbold, John M M; Pierscionek, Barbara K

2017-04-08

The EU offers a suitable milieu for the comparison and harmonisation of healthcare across different languages, cultures, and jurisdictions (albeit with a supranational legal framework), which could provide improvements in healthcare standards across the bloc. There are specific ethico-legal issues with the use of data in healthcare research that mandate a different approach from other forms of research. The use of healthcare data over a long period of time is similar to the use of tissue in biobanks. There is a low risk to subjects but it is impossible to gain specific informed consent given the future possibilities for research. Large amounts of data on a subject present a finite risk of re-identification. Consequently, there is a balancing act between this risk and retaining sufficient utility of the data. Anonymising methods need to take into account the circumstances of data sharing to enable an appropriate balance in all cases. There are ethical and policy advantages to exceeding the legal requirements and thereby securing the social licence for research. This process would require the examination and comparison of data protection laws across the trading bloc to produce an ethico-legal framework compatible with the requirements of all member states. Seven EU jurisdictions are given consideration in this critique.

Long-lived thermal control materials for high temperature and deep space applications

NASA Technical Reports Server (NTRS)

Whitt, Robin; O'Donnell, Tim

1988-01-01

Considerable effort has been put into developing thermal-control materials for the Galileo space-craft. This paper presents a summary of these findings to date with emphasis on requirements, testing and results for the post-Challenger Galileo mission. Polyimide film (Kapton), due to its inherent stability in vacuum, UV, and radiation environments, combined with good mechanical properties over a large temperature range, has been the preferred substrate for spacecraft thermal control materials. Composite outer layers, using Kapton substrates, can be fabricated to meet the requirements of severe space environments. Included in the processing of Kapton-based composite outer layers can be the deposition of metal oxide, metallic and/or polymeric thin-film coatings to provide desirable electrical, optical and thermo-optical properties. In addition, reinforcement of Kapton substrates with fabrics and films is done to improve mechanical properties. Also these substrates can be filled with varying amounts of carbon to achieve particular electrical properties. The investigation and material development reported on here has led to improved thermo-gravimetric stability, surface conductivity, RF transparency, radiation and UV stability, flammability and handle-ability of outer layer thermal control materials for deep space and near-sun spacecraft. Designing, testing, and qualifying composite thermal-control film materials to meet the requirements of the Galileo spacecraft is the scope of this paper.

Topological determinants of self-sustained activity in a simple model of excitable dynamics on graphs

PubMed Central

Fretter, Christoph; Lesne, Annick; Hilgetag, Claus C.; Hütt, Marc-Thorsten

2017-01-01

Simple models of excitable dynamics on graphs are an efficient framework for studying the interplay between network topology and dynamics. This topic is of practical relevance to diverse fields, ranging from neuroscience to engineering. Here we analyze how a single excitation propagates through a random network as a function of the excitation threshold, that is, the relative amount of activity in the neighborhood required for the excitation of a node. We observe that two sharp transitions delineate a region of sustained activity. Using analytical considerations and numerical simulation, we show that these transitions originate from the presence of barriers to propagation and the excitation of topological cycles, respectively, and can be predicted from the network topology. Our findings are interpreted in the context of network reverberations and self-sustained activity in neural systems, which is a question of long-standing interest in computational neuroscience. PMID:28186182

Espresso coffee residues as a nitrogen amendment for small-scale vegetable production.

PubMed

Cruz, Soraia; Marques dos Santos Cordovil, Cláudia S C

2015-12-01

Espresso coffee grounds constitute a residue which is produced daily in considerable amounts, and is often pointed out as being potentially interesting for plant nutrition. Two experiments (incubations and field experiments) were carried out to evaluate the potential nitrogen (N) and phosphorus (P) supply for carrot (Daucus carota L.), spinach (Spinacea oleracea L.) and lettuce (Lactuca sativa L.) nutrition. Immobilisation of nitrogen and phosphorus was detected in all the incubations and, in the field experiments, germination and yield growth were decreased by the presence of espresso coffee grounds, in general for all the species studied. The study showed an inhibition of N and P mineralisation and a reduction of plant germination and growth. Further research is required to determine whether this is related to the immobilising capacity of the residue or possibly due to the presence of caffeine. © 2015 Society of Chemical Industry.

Mechanical properties of the cement of the stalked barnacle Dosima fascicularis (Cirripedia, Crustacea)

PubMed Central

Zheden, Vanessa; Klepal, Waltraud; Gorb, Stanislav N.; Kovalev, Alexander

2015-01-01

The stalked barnacle Dosima fascicularis secretes foam-like cement, the amount of which usually exceeds that produced by other barnacles. When Dosima settles on small objects, this adhesive is additionally used as a float which gives buoyancy to the animal. The dual use of the cement by D. fascicularis requires mechanical properties different from those of other barnacle species. In the float, two regions with different morphological structure and mechanical properties can be distinguished. The outer compact zone with small gas-filled bubbles (cells) is harder than the interior one and forms a protective rind presumably against mechanical damage. The inner region with large, gas-filled cells is soft. This study demonstrates that D. fascicularis cement is soft and visco-elastic. We show that the values of the elastic modulus, hardness and tensile stress are considerably lower than in the rigid cement of other barnacles. PMID:25657833

Flow properties of a series of experimental thermoplastic polymides

NASA Technical Reports Server (NTRS)

Burks, H. D.; Nelson, J. B.; Price, H. L.

1981-01-01

The softening temperature to degradation temperature range of the polymers was about 440 to 650 K. All of the polymers retained small amounts of solvent as indicated by an increase in T(sub g) as the polymers were dried. The flow properties showed that all three polymers had very high apparent viscosities and would require high pressures and/or high temperatures and/or long times to obtain adequate flow in prepregging and molding. Although none was intended for such application, two of the polymers were combined with carbon fibers by solution prepregging. The prepregs were molded into laminates at temperatures and times, the selection of which was guided by the results from the flow measurements. These laminates had room temperature short beam shear strength similar to that of carbon fiber laminates with a thermosetting polyimide matrix. However, the strength had considerable scatter, and given the difficult processing, these polymides probably would not be suitable for continuous fiber composites.

Preliminary measurement of the airframe noise from an F-106B delta wing aircraft at low flyover speeds. [establishment of lower limit for noise level of supersonic transport aircraft

NASA Technical Reports Server (NTRS)

Burley, R. R.

1974-01-01

To establish a realistic lower limit for the noise level of advanced supersonic transport aircraft will require knowledge concerning the amount of noise generated by the airframe itself as it moves through the air. The airframe noise level of an F-106B aircraft was determined and was compared to that predicted from an existing empirical relationship. The data were obtained from flyover and static tests conducted to determine the background noise level of the F-106B aircraft. Preliminary results indicate that the spectrum associated with airframe noise was broadband and peaked at a frequency of about 570 hertz. An existing empirical method successfully predicted the frequency where the spectrum peaked. However, the predicted OASPL value of 105 db was considerably greater than the measures value of 83 db.

Voltage equalization of an ultracapacitor module by cell grouping using number partitioning algorithm

NASA Astrophysics Data System (ADS)

Oyarbide, E.; Bernal, C.; Molina, P.; Jiménez, L. A.; Gálvez, R.; Martínez, A.

2016-01-01

Ultracapacitors are low voltage devices and therefore, for practical applications, they need to be used in modules of series-connected cells. Because of the inherent manufacturing tolerance of the capacitance parameter of each cell, and as the maximum voltage value cannot be exceeded, the module requires inter-cell voltage equalization. If the intended application suffers repeated fast charging/discharging cycles, active equalization circuits must be rated to full power, and thus the module becomes expensive. Previous work shows that a series connection of several sets of paralleled ultracapacitors minimizes the dispersion of equivalent capacitance values, and also the voltage differences between capacitors. Thus the overall life expectancy is improved. This paper proposes a method to distribute ultracapacitors with a number partitioning-based strategy to reduce the dispersion between equivalent submodule capacitances. Thereafter, the total amount of stored energy and/or the life expectancy of the device can be considerably improved.

Designing Radiation Resistance in Materials for Fusion Energy

NASA Astrophysics Data System (ADS)

Zinkle, S. J.; Snead, L. L.

2014-07-01

Proposed fusion and advanced (Generation IV) fission energy systems require high-performance materials capable of satisfactory operation up to neutron damage levels approaching 200 atomic displacements per atom with large amounts of transmutant hydrogen and helium isotopes. After a brief overview of fusion reactor concepts and radiation effects phenomena in structural and functional (nonstructural) materials, three fundamental options for designing radiation resistance are outlined: Utilize matrix phases with inherent radiation tolerance, select materials in which vacancies are immobile at the design operating temperatures, or engineer materials with high sink densities for point defect recombination. Environmental and safety considerations impose several additional restrictions on potential materials systems, but reduced-activation ferritic/martensitic steels (including thermomechanically treated and oxide dispersion-strengthened options) and silicon carbide ceramic composites emerge as robust structural materials options. Materials modeling (including computational thermodynamics) and advanced manufacturing methods are poised to exert a major impact in the next ten years.

Topological determinants of self-sustained activity in a simple model of excitable dynamics on graphs.

PubMed

Fretter, Christoph; Lesne, Annick; Hilgetag, Claus C; Hütt, Marc-Thorsten

2017-02-10

Simple models of excitable dynamics on graphs are an efficient framework for studying the interplay between network topology and dynamics. This topic is of practical relevance to diverse fields, ranging from neuroscience to engineering. Here we analyze how a single excitation propagates through a random network as a function of the excitation threshold, that is, the relative amount of activity in the neighborhood required for the excitation of a node. We observe that two sharp transitions delineate a region of sustained activity. Using analytical considerations and numerical simulation, we show that these transitions originate from the presence of barriers to propagation and the excitation of topological cycles, respectively, and can be predicted from the network topology. Our findings are interpreted in the context of network reverberations and self-sustained activity in neural systems, which is a question of long-standing interest in computational neuroscience.

Localized internal radiotherapy with 90Y particles embedded in a new thermosetting alginate gel: a feasibility study in pigs.

PubMed

Holte, Oyvind; Skretting, Arne; Bach-Gansmo, Tore; Hol, Per Kristian; Johnsrud, Kjersti; Tønnesen, Hanne Hjorth; Karlsen, Jan

2006-02-01

Internal radiotherapy requires the localization of the radionuclide to the site of action. A new injectable alginate gel formulation intended to undergo immediate gelation in tissues and capable of encapsulating radioactive particles containing 90Y was investigated. The formulation was injected intramuscularly, into the bone marrow compartment of the femur and intravenously, respectively, in pigs. The distribution of radioactivity in various tissues was determined. Following intramuscular injection, more than 90% of the radioactivity was found at the site of injection. Following injection into bone marrow, 30-40% of the radioactivity was retained at the site of injection, but a considerable amount of radioactivity was also detected in the lungs (35-45%) and the liver (5-18%). Following intravenous injection, 80-90% of the radioactivity was found in the lungs. The present formulation appears suitable for localized radiotherapy in organs and tissues having low perfusion.

Brachytherapy devices and methods employing americium-241

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gray, L. A.

1985-04-16

Sources and methods for radiation therapy, particularly brachytherapy, employing americium-241 (60 keV gamma emission and 433 year half-life) provide major advantages for radiotherapy, including simplified radiation protection, dose reduction to healthy tissue, increased dose to tumor, and improved dose distributions. A number of apparent drawbacks and unfavorable considerations including low gamma factor, high self-absorption, increased activity required and alpha-particle generation leading to helium gas pressure buildup and potential neutron contamination in the generated radiation are all effectively dealt with and overcome through recognition of subtle favorable factors unique to americium-241 among brachytherapy sources and through suitable constructional techniques. Due tomore » an additional amount of radiation, in the order of 50%, provided primarily to nearby regions as a result of Compton scatter in tissue and water, higher dose rates occur than would be predicted by conventional calculations.« less

Sample Size for Biosimilar Trials: In Defense of Synthesis.

PubMed

Clark, Timothy; Jo, Sook Jung; Phillips, Alan

2018-05-01

Biosimilars are biological products similar to, but not the same as, the innovator products. Both the European Medicines Agency and the Food and Drug Administration have released detailed guidance on the development of biosimilars. This guidance requires the pivotal phase 3 clinical study to have an equivalence design, which means that the study objective is to demonstrate that one treatment is neither "worse than" nor "better than" the other by some "clinically unimportant" amount. The most critical and controversial step in designing such a study is the choice of equivalence margin, as this determines the conclusion of the study. In this paper, we outline the methodology for determining an equivalence margin and, through case studies on biosimilar trastuzumab (HERCEPTIN ) and biosimilar bevacizumab (AVASTIN), explain the challenges of applying this in practice and why the synthesis method should be given greater consideration by regulatory authorities and biosimilar developers.

Should the next standby power target be 0-watt?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meier, Alan; Siderius, Hans-Paul

The standby power use of appliances continues to consume large amounts of electricity. Considerable success has been made in reducing each device’s use, but these savings have been offset by a huge increase in the number of products using standby power and new power requirements for maintaining network connections. Current strategies to reduce standby have limitations and may not be most appropriate for emerging energy consumption trends. A new strategy for further reductions in standby, the “Standzero” option, encourages electrical products to be designed to operate for short periods without relying on mains-supplied electricity. Energy savings are achieved through enhancedmore » efficiency and by harvesting ambient energy. A sensitivity analysis suggests many appliances could be designed to operate for at least an hour without relying on mains power and, in some cases, may be able to operate indefinitely at zero watts until activated.« less

Transcriptome Analysis at the Single-Cell Level Using SMART Technology.

PubMed

Fish, Rachel N; Bostick, Magnolia; Lehman, Alisa; Farmer, Andrew

2016-10-10

RNA sequencing (RNA-seq) is a powerful method for analyzing cell state, with minimal bias, and has broad applications within the biological sciences. However, transcriptome analysis of seemingly homogenous cell populations may in fact overlook significant heterogeneity that can be uncovered at the single-cell level. The ultra-low amount of RNA contained in a single cell requires extraordinarily sensitive and reproducible transcriptome analysis methods. As next-generation sequencing (NGS) technologies mature, transcriptome profiling by RNA-seq is increasingly being used to decipher the molecular signature of individual cells. This unit describes an ultra-sensitive and reproducible protocol to generate cDNA and sequencing libraries directly from single cells or RNA inputs ranging from 10 pg to 10 ng. Important considerations for working with minute RNA inputs are given. © 2016 by John Wiley & Sons, Inc. Copyright © 2016 John Wiley & Sons, Inc.

Antiretroviral Therapy for HIV-2 Infection: Recommendations for Management in Low-Resource Settings

PubMed Central

Peterson, Kevin; Jallow, Sabelle; Rowland-Jones, Sarah L.; de Silva, Thushan I.

2011-01-01

HIV-2 contributes approximately a third to the prevalence of HIV in West Africa and is present in significant amounts in several low-income countries outside of West Africa with historical ties to Portugal. It complicates HIV diagnosis, requiring more expensive and technically demanding testing algorithms. Natural polymorphisms and patterns in the development of resistance to antiretrovirals are reviewed, along with their implications for antiretroviral therapy. Nonnucleoside reverse transcriptase inhibitors, crucial in standard first-line regimens for HIV-1 in many low-income settings, have no effect on HIV-2. Nucleoside analogues alone are not sufficiently potent enough to achieve durable virologic control. Some protease inhibitors, in particular those without ritonavir boosting, are not sufficiently effective against HIV-2. Following review of the available evidence and taking the structure and challenges of antiretroviral care in West Africa into consideration, the authors make recommendations and highlight the needs of special populations. PMID:21490779

Studying biodiversity: is a new paradigm really needed?

USGS Publications Warehouse

Nichols, James D.; Cooch, Evan G.; Nichols, Jonathan M.; Sauer, John R.

2012-01-01

Authors in this journal have recommended a new approach to the conduct of biodiversity science. This data-driven approach requires the organization of large amounts of ecological data, analysis of these data to discover complex patterns, and subsequent development of hypotheses corresponding to detected patterns. This proposed new approach has been contrasted with more-traditional knowledge-based approaches in which investigators deduce consequences of competing hypotheses to be confronted with actual data, providing a basis for discriminating among the hypotheses. We note that one approach is directed at hypothesis generation, whereas the other is also focused on discriminating among competing hypotheses. Here, we argue for the importance of using existing knowledge to the separate issues of (a) hypothesis selection and generation and (b) hypothesis discrimination and testing. In times of limited conservation funding, the relative efficiency of different approaches to learning should be an important consideration in decisions about how to study biodiversity.

Characterisation of medical-waste sterilisation-plant wastewater and a preliminary study of coagulation-flocculation treatment options.

PubMed

Ozkan, O; Mihçiokur, H; Azgin, S T; Ozdemir, O

2010-01-01

Wastewater from a medical-waste sterilisation plant (MWSP) contains unique pollutants and requires on-site treatment to prevent contamination of the municipal sewage system and receiving water bodies. Therefore, to meet the prescribed discharge standards and comply with the legal regulations, pre-treatment must be applied to MWSP wastewater. In this study, the capabilities of coagulation-flocculation processes were investigated for MWSP wastewater treatment. Processes using ferric chloride, ferrous sulfate and aluminium sulfate as coagulants were characterised. During the coagulation experiments, seven different coagulant dosages and four different pH values were evaluated to determine the optimum coagulant dosage and pH value. The highest removal efficiency of chemical oxygen demand (COD) was obtained using 300 mg/L of ferric chloride at pH 10. A COD removal of about 60% as well as considerable reductions in the amounts of suspended solids, nitrogen and phosphorus were realised.

Thermodynamics and Human Population

NASA Astrophysics Data System (ADS)

Cordry, Sean M.

2010-09-01

This paper discusses a Fermi-problem exercise through which I take students in several of my college courses. Students work in teams, determining the average daily Caloric needs per person. Then they use insolation values to determine the size of a collection area needed to absorb the previously determined daily energy requirements. Adjustments to the size of the collection area are made based on energy absorption per biological trophic level, as well as the consideration that most diets are a mixture of plant- and animal-derived elements. Finally, using the total amount of farmland available on the planet, students calculate a maximum population value. Although the maximum population values derived herewith should not be considered authoritative, the exercise has three beneficial purposes: 1) a chance to talk about the modeling process and extrapolations, 2) an unexpected application of physics to social contexts, and 3) raising student awareness of population and energy issues.

Considerations for Bioassay Monitoring of Mixtures of Radionuclides

DOE PAGES

Klumpp, John; Waters, Tom; Bertelli, Luiz

2017-10-01

Complying with regulations for bioassay monitoring of radionuclide intakes is significantly more complex for mixtures than it is for pure radionuclides. Different constituents will naturally have different dose coefficients, be detectable at significantly different levels, and may require very different amounts of effort to bioassay. The ability to use certain constituents as surrogates for others will depend on how well characterized the mixture is, as well as whether the employee is also working with other radionuclides. This is further compounded by the fact that the composition of a mixture (or even of a pure radionuclide) is likely to change overmore » time. Internal dosimetrists must decide how best to monitor employees who work with radionuclide mixtures. In particular, they must decide which constituents should be monitored routinely, which constituents only need to be monitored in the case of an intake, and how to estimate doses based on intakes of monitored and unmonitored constituents.« less

Reusable shielding material for neutron- and gamma-radiation

NASA Astrophysics Data System (ADS)

Calzada, Elbio; Grünauer, Florian; Schillinger, Burkhard; Türck, Harald

2011-09-01

At neutron research facilities all around the world radiation shieldings are applied to reduce the background of neutron and gamma radiation as far as possible in order to perform high quality measurements and to fulfill the radiation protection requirements. The current approach with cement-based compounds has a number of shortcomings: "Heavy concrete" contains a high amount of elements, which are not desired to obtain a high attenuation of neutron and/or gamma radiation (e.g. calcium, carbon, oxygen, silicon and aluminum). A shielding material with a high density of desired nuclei such as iron, hydrogen and boron was developed for the redesign of the neutron radiography facility ANTARES at beam tube 4 (located at a cold neutron source) of FRM-II. The composition of the material was optimized by help of the Monte Carlo code MCNP5. With this shielding material a considerable higher attenuation of background radiation can be obtained compared to usual heavy concretes.

USE Efficiency: an innovative educational programme for energy efficiency in buildings

NASA Astrophysics Data System (ADS)

Papadopoulos, Theofilos A.; Christoforidis, Georgios C.; Papagiannis, Grigoris K.

2017-10-01

Power engineers are expected to play a pivotal role in transforming buildings into smart and energy-efficient structures, which is necessary since buildings are responsible for a considerable amount of the total energy consumption. To fulfil this role, a holistic approach in education is required, tackling subjects traditionally related to other engineering disciplines. In this context, USE Efficiency is an inter-institutional and interdisciplinary educational programme implemented in nine European Universities targeting energy efficiency in buildings. The educational programme effectively links professors, students, engineers and industry experts, creating a unique learning environment. The scope of the paper is to present the methodology and the general framework followed in the USE Efficiency programme. The proposed methodology can be adopted for the design and implementation of educational programmes on energy efficiency and sustainable development in higher education. End-of-course survey results showed positive feedback from the participating students, indicating the success of the programme.

Topological determinants of self-sustained activity in a simple model of excitable dynamics on graphs

NASA Astrophysics Data System (ADS)

Fretter, Christoph; Lesne, Annick; Hilgetag, Claus C.; Hütt, Marc-Thorsten

2017-02-01

Simple models of excitable dynamics on graphs are an efficient framework for studying the interplay between network topology and dynamics. This topic is of practical relevance to diverse fields, ranging from neuroscience to engineering. Here we analyze how a single excitation propagates through a random network as a function of the excitation threshold, that is, the relative amount of activity in the neighborhood required for the excitation of a node. We observe that two sharp transitions delineate a region of sustained activity. Using analytical considerations and numerical simulation, we show that these transitions originate from the presence of barriers to propagation and the excitation of topological cycles, respectively, and can be predicted from the network topology. Our findings are interpreted in the context of network reverberations and self-sustained activity in neural systems, which is a question of long-standing interest in computational neuroscience.

Lost in Translation: NIH Funding for Family Medicine Research Remains Limited.

PubMed

Cameron, Brianna J; Bazemore, Andrew W; Morley, Christopher P

2016-01-01

Departments of Family Medicine (DFMs) in the United States consistently received around 0.2% of total research funding dollars and 0.3% of all awards awarded by the National Institutes of Health (NIH) across the years 2002 to 2014. We used the NIH Reporter tool to quantify the amount of funding and the number of grants received by DFMs from the NIH from 2002 to 2014, using criteria similar to those applied by previous researchers. NIH funding to DFMs as remained fairly consistent across the time period, at roughly 0.2% of total NIH funding and 0.3% of total grants awarded. Changing these proportions will likely require considerable effort to build research capacity within DFMs and their frontline practice research networks, and to shift policymaker and funder perceptions of the value of the FM research enterprise. © Copyright 2016 by the American Board of Family Medicine.

Functional crown lengthening surgery in the aesthetic zone; periodontic and prosthodontic considerations.

PubMed

Patel, Rajiv M; Baker, Paul

2015-01-01

Crown lengthening surgery aims to increase the amount of supragingival tooth tissue by resection of the soft and/or hard tissues to enable otherwise unrestorable teeth to be restored by increasing the retention and resistance forms of the teeth. Restoration of the worn dentition may require significant prosthodontic knowledge and skill. A prosthodontist should be involved from the beginning of the management of the patient. A number of key stages should be considered for correct management. Although the periodontist may guide the prosthodontist with regards to what may or may not be possible surgically, the overall treatment plan should be prosthodontically driven. Clinical Relevance: Toothwear of the anterior dentition provides a unique challenge to restore not only function but also to manage the aesthetic demands of the patient. To ensure that the correct outcome is reached, clinicians should be familiar with the normal anatomical proportions and relationships to enable planning and treatment to take place.

Study design options in evaluating gene-environment interactions: practical considerations for a planned case-control study of pediatric leukemia.

PubMed

Goodman, Michael; Dana Flanders, W

2007-04-01

We compare methodological approaches for evaluating gene-environment interaction using a planned study of pediatric leukemia as a practical example. We considered three design options: a full case-control study (Option I), a case-only study (Option II), and a partial case-control study (Option III), in which information on controls is limited to environmental exposure only. For each design option we determined its ability to measure the main effects of environmental factor E and genetic factor G, and the interaction between E and G. Using the leukemia study example, we calculated sample sizes required to detect and odds ratio (OR) of 2.0 for E alone, an OR of 10 for G alone and an interaction G x E of 3. Option I allows measuring both main effects and interaction, but requires a total sample size of 1,500 cases and 1,500 controls. Option II allows measuring only interaction, but requires just 121 cases. Option III allows calculating the main effect of E, and interaction, but not the main effect of G, and requires a total of 156 cases and 133 controls. In this case, the partial case-control study (Option III) appears to be more efficient with respect to its ability to answer the research questions for the amount of resources required. The design options considered in this example are not limited to observational epidemiology and may be applicable in studies of pharmacogenomics, survivorship, and other areas of pediatric ALL research.

Design considerations for a pressure-driven multi-stage rocket

NASA Astrophysics Data System (ADS)

Sauerwein, Steven Craig

2002-01-01

The purpose of this study was to examine the feasibility of using propellant tank pressurization to eliminate the use of high-pressure turbopumps in multi-stage liquid-fueled satellite launchers. Several new technologies were examined to reduce the mass of such a rocket. Composite materials have a greater strength-to-weight ratio than metals and can be used to reduce the weight of rocket propellant tanks and structure. Catalytically combined hydrogen and oxygen can be used to heat pressurization gas, greatly reducing the amount of gas required. Ablatively cooled rocket engines can reduce the complexity and cost of the rocket. Methods were derived to estimate the mass of the various rocket components. These included a method to calculate the amount of gas needed to pressurize a propellant tank by modeling the behavior of the pressurization gas as the liquid propellant flows out of the tank. A way to estimate the mass and size of a ablatively cooled composite cased rocket engine. And a method to model the flight of such a rocket through the atmosphere in conjunction with optimization of the rockets trajectory. The results show that while a liquid propellant rocket using tank pressurization are larger than solid propellant rockets and turbopump driven liquid propellant rockets, they are not impractically large.

RADIATION PRESERVATION OF SELECTED FRUITS AND VEGETABLES. An Analysis of R&D Programing and Market Factors

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1961-01-01

Strawberries, peaches, citrus fruits, grapes, and tomatoes were irradiated experimentally. Results are inconclusive, but indications of both shelf-life extension and unfaqorable radiation effects were observed at dose levels below 500,000 rads. These are promising commodities for radiation sterilization in terms of value, present shelf-life, incidence and amount of spoilage, ard existing methods of preservation. The packing house is a logical location for the radiation source. Hourly capacities in the neighborhood of 10 tons per hour for the commercial facility are appropriate. Because of seasonal and geographical spread of harvesting, facilities adaptable to several crops and portable facilities deserve consideration. Preliminarymore » results are presented from studies on the wholesomeness of irradiated foods, but more work will be required for grapes, strawberries, and tomatoes. The radiation levels and types of radiation used for pasteurization theoretically could cre ate extremely minute amounts of radioactivity. Technical knowledge is sufficient to permit engineering work on a source of radiation for pilot-plant operation. Surface irradiation technology, so far relatively undeveloped, could offer an alternative with the possibility of lower costs. Economic feasibility cannot be determined until later because cost estimates are preliminary and the potential benefits are not adequately known. (auth)« less

The examination of nursing work through a role accountability framework.

PubMed

White, Deborah E; Jackson, Karen; Besner, Jeanne; Norris, Jill M

2015-07-01

To use work analysis data to describe the amount of time registered nurses (RNs) and health care aides (HCA) spent on key clinical role accountabilities and other work activities. Health care providers are not effectively utilized. To improve their efficiency and effectiveness, it is necessary to understand how nursing providers enact their role accountabilities. Using palm pilot Function Analysis technology, observers recorded the activities of 35 registered nurse and 17 health care aides shifts on a second-by-second basis over 5 days. Work activities were classified using the Nursing Role Effectiveness Model, which conceptualizes nursing practice in terms of clinical role accountabilities. The registered nurses spent a considerable amount of time on bio-medical assessment/surveillance, relatively little time was spent on patient and family psycho-social-cultural-spiritual assessment/surveillance and support. Unlike other work sampling studies, this research project examined nursing work within a role accountability framework; an important first step in the call for the measurement of the impact of nursing care. Changes to how registered nurses and health care aides enact their role will require a clear vision by unit managers and their staff of their role accountabilities, and the gap between ideal and actual practice. © 2013 John Wiley & Sons Ltd.

Data Curation for the Exploitation of Large Earth Observation Products Databases - The MEA system

NASA Astrophysics Data System (ADS)

Mantovani, Simone; Natali, Stefano; Barboni, Damiano; Cavicchi, Mario; Della Vecchia, Andrea

2014-05-01

National Space Agencies under the umbrella of the European Space Agency are performing a strong activity to handle and provide solutions to Big Data and related knowledge (metadata, software tools and services) management and exploitation. The continuously increasing amount of long-term and of historic data in EO facilities in the form of online datasets and archives, the incoming satellite observation platforms that will generate an impressive amount of new data and the new EU approach on the data distribution policy make necessary to address technologies for the long-term management of these data sets, including their consolidation, preservation, distribution, continuation and curation across multiple missions. The management of long EO data time series of continuing or historic missions - with more than 20 years of data available already today - requires technical solutions and technologies which differ considerably from the ones exploited by existing systems. Several tools, both open source and commercial, are already providing technologies to handle data and metadata preparation, access and visualization via OGC standard interfaces. This study aims at describing the Multi-sensor Evolution Analysis (MEA) system and the Data Curation concept as approached and implemented within the ASIM and EarthServer projects, funded by the European Space Agency and the European Commission, respectively.

Evaluation of new superficially porous particles with carbon core and nanodiamond-polymer shell for proteins characterization.

PubMed

Bobály, Balázs; Guillarme, Davy; Fekete, Szabolcs

2015-02-01

A new superficially porous material possessing a carbon core and nanodiamond-polymer shell and pore size of 180Å was evaluated for the analysis of large proteins. Because the stationary phase on this new support contains a certain amount of protonated amino groups within the shell structure, the resulting retention mechanism is most probably a mix between reversed phase and anion exchange. However, under the applied conditions (0.1-0.5% TFA in the mobile phase), it seemed that the main retention mechanism for proteins was hydrophobic interaction with the C18 alkylchains on this carbon based material. In this study, we demonstrated that there was no need to increase mobile phase temperature, as the peak capacity was not modified considerably between 30 and 80°C for model proteins. Thus, the risk of thermal on-column degradation or denaturation of large proteins is not relevant. Another important difference compared to silica-based materials is that this carbon-based column requires larger amount of TFA, comprised between 0.2 and 0.5%. Finally, it is important to mention that selectivity between closely related proteins (oxidized, native and reduced forms of Interferon α-2A variants) could be changed mostly through mobile phase temperature. Copyright © 2014 Elsevier B.V. All rights reserved.

77 FR 29345 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-17

... of the Currency), Director Richard Cordray (Director, Consumer Financial Protection Bureau) and Acting Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters... earlier notice of the meeting was practicable; that the public interest did not require consideration of...

NACS Store Planning Manual.

ERIC Educational Resources Information Center

College Store Journal, 1979

1979-01-01

Topics discussed by the NACS Store Planning/Renovation Committees in this updated version of the college store renovation manual include: short- and long-range planning, financial considerations, professional planning assistance, the store's image and business character, location considerations, building requirements, space requirements, fixtures,…

IMPACTS OF IMAGERY TEMPORAL FREQUENCES ON LAND-COVER CHANGE DETECTION MONITORING

EPA Science Inventory

An important consideration for monitoring land~cover (LC) change is the nominal temporal frequency of remote sensor data acquisitions required to adequately characterize change events, Ecosystem specific regeneration rates are an important consideration for determining the requir...

Scheduler Design Criteria: Requirements and Considerations

NASA Technical Reports Server (NTRS)

Lee, Hanbong

2016-01-01

This presentation covers fundamental requirements and considerations for developing schedulers in airport operations. We first introduce performance and functional requirements for airport surface schedulers. Among various optimization problems in airport operations, we focus on airport surface scheduling problem, including runway and taxiway operations. We then describe a basic methodology for airport surface scheduling such as node-link network model and scheduling algorithms previously developed. Next, we explain how to design a mathematical formulation in more details, which consists of objectives, decision variables, and constraints. Lastly, we review other considerations, including optimization tools, computational performance, and performance metrics for evaluation.

48 CFR 32.005 - Consideration for contract financing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Consideration for contract... GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING 32.005 Consideration for contract financing. (a... separate consideration for the contract financing clause. The value of the contract financing to the...

The science of softball: implications for performance and injury prevention.

PubMed

Flyger, Nicholas; Button, Chris; Rishiraj, Neetu

2006-01-01

Whilst the sport of softball has achieved worldwide popularity over the last 100 years, a consideration of the scientific principles underpinning softball is in its infancy. It is clear that the various motor skills associated with softball, such as pitching, batting and fielding, place considerable perceptual and physical demands upon players. Each of these skill categories are examined in more detail by reviewing the biomechanical principles associated with skilled performance. For pitching, a certain amount of information can be gleaned from baseball research; however, the underarm technique required by softball places the highest loads on the arm and shoulder during the accelerative, downward phase of the swing. Kinematic analyses of the bat swing suggest that elite batters have approximately 200 ms to decide whether to swing, and approximately the same duration to complete the swing (resulting in reported bat speeds of up to 40 m/sec). The research conducted on fielding has been limited to a consideration of throwing styles adopted in games. A variety of throwing techniques are adopted in the course of a typical game but elite players commonly adopt a sidearm technique when returning to base as quickly as possible. Data obtained from the National Athletic Training Association indicate a similar level of injury incidence in softball as in baseball. Approximately 17% of injuries are experienced by the pitcher and approximately 25% of all injuries are located in the forearm/wrist/hand joint segments. Sports science and sports medicine research have the potential to contribute significantly to performance enhancement and injury prevention in the future.

Validation of RAP and/or RAS in hydraulic cement concrete : technical report.

DOT National Transportation Integrated Search

2017-05-01

The increasing maintenance and rehabilitation actions lead to considerable amounts of reclaimed asphalt pavement : (RAP) left in stockpiles in the United States. The possible use of RAP in Portland cement concrete (PCC) as aggregate : replacement not...

Safety Considerations in the Chemical Process Industries

NASA Astrophysics Data System (ADS)

Englund, Stanley M.

There is an increased emphasis on chemical process safety as a result of highly publicized accidents. Public awareness of these accidents has provided a driving force for industry to improve its safety record. There has been an increasing amount of government regulation.

21 CFR 520.1880 - Prednisolone tablets.

Code of Federal Regulations, 2010 CFR

2010-04-01

...)(2) of this chapter. (c) Special considerations. (1) Clinical and experimental data have demonstrated... Cushingoid syndrome. The presence of diabetes, osteoporosis, predisposition to thrombophlebitis, hypertension...-inflammatory action of corticosteroids may mask signs of infection. (d) Conditions of use—(1) Amount. Dogs: 2.5...

Urban Economics, Conduit-Colonialism and Public Policy

ERIC Educational Resources Information Center

Hamilton, Charles V.

1972-01-01

Considerable amounts of money already come into the cities and the black communities, but go right out as payments to absentee landlords, exploitative merchants, credit gougers, and loan sharks, as well as in support of the colonial management system. (Author/JM)

Health Assessment Document for Ethylene Oxide

EPA Science Inventory

The largest single use of ethylene oxide is as an intermediate in the synthesis of ethylene glycol. However, small amounts of this epoxide are used as a sterilant or pesticide in commodities, pharmaceuticals, medical devices, tobacco, and other items, representing a considerable ...

40 CFR 230.11 - Factual determinations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... changes will cause violations of applicable water quality standards. Consideration should also be given to..., particularly concentrations of constituents, amount of material, type of material (sand, silt, clay, etc.) and... the productivity and water quality of existing aquatic ecosystems. (2) Cumulative effects attributable...

Time spent by people managing chronic obstructive pulmonary disease indicates biographical disruption

PubMed Central

Jowsey, Tanisha; Yen, Laurann E; Bagheri, Nasser; McRae, Ian S

2014-01-01

Since Bury’s 1982 proposal that chronic illness creates biographical disruption for those who are living with it, there has been no effort to quantitatively measure such disruption. “Biographical disruption” refers to the substantial and directive influence that chronic illness can have over the course of a person’s life. Qualitative research and time use studies have demonstrated that people with chronic illnesses spend considerable amounts of time managing their health, and that these demands may change over time. This study was designed to measure the time that older people with chronic illnesses spend on selected health practices as one indicator of biographical disruption. We look specifically at the time use of people with chronic obstructive pulmonary disease (COPD). As part of a larger time use survey, a recall questionnaire was mailed to 3,100 members of Lung Foundation Australia in 2011. A total of 681 responses were received (22.0% response rate), 611 of which were from people with COPD. Descriptive analyses were undertaken on the amount of time spent on selected health-related activities including personal care, nonclinical health-related care, and activity relating to health services. Almost all people with COPD report spending some time each day on personal or home-based health-related tasks, with a median time of 15 minutes per day spent on these activities. At the median, people also report spending about 30 minutes per day exercising, 2.2 hours per month (the equivalent of 4.4 minutes per day) on nonclinical health-related activities, and 4.1 hours per month (equivalent to 8.2 minutes per day) on clinical activities. Excluding exercise, the median total time spent on health-related activities was 17.8 hours per month (or 35.6 minutes per day). For people in the top 10% of time use, the total amount of time was more than 64.6 hours per month (or 2.2 hours per day) excluding exercise, and 104 hours per month (or 3.5 hours per day) including exercise. The amount of time spent on health-related activity, such as engaging in personal care tasks, may be regular and predictable. The execution of these tasks generally takes relatively small amounts of time, and might be incorporated into daily life (biography) without causing significant disruption. Other activities may require large blocks of time, and they may be disruptive in a practical way that almost inevitably disrupts biography. The amount of time required does not appear to alter in relation to the time since diagnosis. The scale of time needed to manage one’s health could easily be interpreted as disruptive, and for some people, even overwhelming. PMID:24477271

78 FR 41928 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... the Currency), Director Richard Cordray (Director, Consumer Financial Protection Bureau), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be... the meeting was practicable; that the public interest did not require consideration of the matters in...

78 FR 48678 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-09

... the Currency), Director Richard Cordray (Director, Consumer Financial Protection Bureau), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be... the meeting was practicable; that the public interest did not require consideration of the matters in...

78 FR 75920 - Sunshine Act Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-13

... the Currency), Director Richard Cordray (Director, Consumer Financial Protection Bureau), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be... the meeting was practicable; that the public interest did not require consideration of the matters in...

78 FR 34100 - Sunshine Act Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-06

... the Currency), Director Richard Cordray (Director, Consumer Financial Protection Bureau), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be... the meeting was practicable; that the public interest did not require consideration of the matters in...

78 FR 31548 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-24

... Currency), Director Richard Cordray (Director, Consumer Financial Protection Bureau), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be the subject... was practicable; that the public interest did not require consideration of the matters in a meeting...

78 FR 66005 - Notice of Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-04

... of the Currency), Director Richard Cordray (Director, Consumer Financial Protection Bureau), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which... notice of the meeting was practicable; that the public interest did not require consideration of the...

Minimal detectable change of the actual amount of use test and the motor activity log: the EXCITE Trial.

PubMed

Chen, Shuya; Wolf, Steven L; Zhang, Qin; Thompson, Paul A; Winstein, Carolee J

2012-06-01

Efficacy of task-oriented training can be reliably trusted only when the inherent measurement variability is determined. The Actual Amount of Use Test (AAUT) and the Motor Activity Log (MAL) have been used together as measures of spontaneous arm use after an intervention; however, the minimal detectable change (MDC) of AAUT and MAL has not been addressed. To compare the MDC₉₀ of the AAUT and the MAL in the context of a randomized controlled trial of a neurorehabilitation intervention, the Extremity Constraint-Induced Therapy Evaluation trial. A preplanned secondary analysis was conducted using pre-post test data from the control group. Estimated MDC₉₀ were normalized to the maximum value of the scale of the AAUT and the MAL for each subscale: amount of use (AAUTa, MALa) and quality of movement (AAUTq, MALq). . The MDC₉₀ of the AAUTq and the MALq were 14.4% and 15.4%, respectively. However, the MDC₉₀ required greater change for the AAUTa (24.2%) than the MALa (16.8%). The training-induced spontaneous arm use exceeded the MDC₉₀ for the MAL but fell below that for the AAUT immediately after the intervention and at 1-year follow-up visit. The greater variability and insensitivity to treatment effect for the AAUTa is likely because of the low resolution of its scoring system. As such, there is a considerable need to develop valid and reliable tools that capture purposeful arm use outside the laboratory, perhaps through leveraging new sensing technologies with objective activity monitoring.

Minimal Detectable Change of the Actual Amount of Use Test and the Motor Activity Log: The EXCITE Trial

PubMed Central

Chen, Shuya; Wolf, Steven L.; Zhang, Qin; Thompson, Paul A.; Winstein, Carolee J.

2013-01-01

Background Efficacy of task-oriented training can be reliably trusted only when the inherent measurement variability is determined. The Actual Amount of Use Test (AAUT) and the Motor Activity Log (MAL) have been used together as measures of spontaneous arm use after an intervention; however, the minimal detectable change (MDC) of AAUT and MAL has not been addressed. Objective To compare the MDC90 of the AAUT and the MAL in the context of a randomized controlled trial of a neurorehabilitation intervention, the Extremity Constraint-Induced Therapy Evaluation trial. Methods A preplanned secondary analysis was conducted using pre–post test data from the control group. Estimated MDC90 were normalized to the maximum value of the scale of the AAUT and the MAL for each subscale: amount of use (AAUTa, MALa) and quality of movement (AAUTq, MALq). Results The MDC90 of the AAUTq and the MALq were 14.4% and 15.4%, respectively. However, the MDC90 required greater change for the AAUTa (24.2%) than the MALa (16.8%). The training-induced spontaneous arm use exceeded the MDC90 for the MAL but fell below that for the AAUT immediately after the intervention and at 1-year follow-up visit. Conclusions The greater variability and insensitivity to treatment effect for the AAUTa is likely because of the low resolution of its scoring system. As such, there is a considerable need to develop valid and reliable tools that capture purposeful arm use outside the laboratory, perhaps through leveraging new sensing technologies with objective activity monitoring. PMID:22275157

Optical Gauging of Liquid and Solid Hydrogen in Zero-g Environments for Space Applications

NASA Astrophysics Data System (ADS)

Caimi, F. M.; Kocak, D. M.; Justak, J. F.

2006-04-01

Knowledge of fuel reserve levels is required for propellant management systems and power considerations in many space applications. Although methods are known for gauging fuel amounts in gravitational environments, no simple passive method is known for quantifying fuel reserves in a zero-g environment. Current ground-based methods for cryogenic liquid quantification use wire resistance measurements or point sensors, combined with pressure and temperature measurements to arrive at the desired accuracy. This paper presents an optical sensor design based on existing radiometric and integrating sphere techniques that have the potential to provide quantification in both zero-g and ground based applications. The general approach relies upon optical absorption of liquid or solid hydrogen in a vibrational overtone spectral region. The cryogen storage tank is configured as an "Integrating Sphere." Inside the tank, in a zero-g environment, the liquid and/or gaseous fuel will be free-floating and/or attached to the walls. Incident light irradiates even the smallest portion of the sphere due to the integration. The amount of light absorbed in the tank will be proportional to the amount of fuel present. Therefore, regardless of scatter, all light passed through the medium in the sphere is contained and can be quantified. This paper presents simulations for various liquid hydrogen volumetric configurations and confirms utility of the method. Initial experimental results for a liquid hydrogen analyte in non-zero-g environments are provided. Using this sensor, it is possible to achieve a 10× increase in fuel measurement accuracy which can provide an increased orbit or payload capability.

Engine design considerations for 2nd generation supersonic transports

NASA Technical Reports Server (NTRS)

Howlett, R. A.

1975-01-01

The environmental and economic goals projected for advanced supersonic transports will require revolutionary improvements in propulsion systems. Variable cycle engine concepts that incorporate unique components and advanced technologies show promise in meeting these goals. Pratt & Whitney Aircraft is conducting conceptual design studies of variable cycle engine concepts under NASA sponsorship. This paper reviews some of the design considerations for these engine concepts. Emphasis is placed on jet noise abatement, reduction of emissions, performance improvements, installation considerations, hot-section characteristics and control system requirements. Two representative variable cycle engine concepts that incorporate these basic design considerations are described.

10 CFR 140.13b - Amount of liability insurance required for uranium enrichment facilities.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Amount of liability insurance required for uranium... required for uranium enrichment facilities. Each holder of a license issued under Parts 40 or 70 of this chapter for a uranium enrichment facility that involves the use of source material or special nuclear...

10 CFR 140.13b - Amount of liability insurance required for uranium enrichment facilities.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Amount of liability insurance required for uranium... required for uranium enrichment facilities. Each holder of a license issued under Parts 40 or 70 of this chapter for a uranium enrichment facility that involves the use of source material or special nuclear...

10 CFR 140.13b - Amount of liability insurance required for uranium enrichment facilities.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Amount of liability insurance required for uranium... required for uranium enrichment facilities. Each holder of a license issued under Parts 40 or 70 of this chapter for a uranium enrichment facility that involves the use of source material or special nuclear...

10 CFR 140.13b - Amount of liability insurance required for uranium enrichment facilities.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Amount of liability insurance required for uranium... required for uranium enrichment facilities. Each holder of a license issued under Parts 40 or 70 of this chapter for a uranium enrichment facility that involves the use of source material or special nuclear...

The relation between rice consumption, arsenic contamination, and prevalence of diabetes in South Asia

PubMed Central

Hassan, Fatima Ismail; Niaz, Kamal; Khan, Fazlullah; Maqbool, Faheem; Abdollahi, Mohammad

2017-01-01

Rice is the major staple food for about two billion people living in Asia. It has been reported to contain considerable amount of inorganic arsenic which is toxic to pancreatic beta cells and disrupt glucose homeostasis. Articles and conference papers published between 1992 and 2017, indexed in Scopus, PubMed, EMBASE, Google, and Google scholar were used. Arsenic exposure has been associated with increased blood glucose and insulin levels, or decreased sensitization of insulin cells to glucose uptake. Several studies have shown the association between inorganic arsenic exposure and incidence of diabetes mellitus. Considerable amounts of arsenic have been reported in different types of rice which may be affected by cultivation methods, processing, and country of production. Use of certain microbes, fertilizers, and enzymes may reduce arsenic uptake or accumulation in rice, which may reduce its risk of toxicity. Combined exposure to contaminated rice, other foods and drinking water may increase the risk of diabetes in these countries. Maximum tolerated daily intake of arsenic contaminated rice (2.1 µg/day kg body weight) has been set by WHO, which may be exceeded depending on its content in rice and amount consumed. Hence, increased prevalence of diabetes in South Asia may be related to the consumption of arsenic contaminated rice depending on its content in the rice and daily amount consumed. In this review, we have focused on the possible relation between rice consumption, arsenic contamination, and prevalence of diabetes in South Asia. PMID:29285009

Optimum Allocation of Water to the Cultivation Farms Using Genetic Algorithm

NASA Astrophysics Data System (ADS)

Saeidian, B.; Saadi Mesgari, M.; Ghodousi, M.

2015-12-01

The water scarcity crises in the world and specifically in Iran, requires the proper management of this valuable resource. According to the official reports, around 90 percent of the water in Iran is used for agriculture. Therefore, the adequate management and usage of water in this section can help significantly to overcome the above crises. The most important aspect of agricultural water management is related to the irrigation planning, which is basically an allocation problem. The proper allocation of water to the farms is not a simple and trivial problem, because of the limited amount of available water, the effect of different parameters, nonlinear characteristics of the objective function, and the wideness of the solution space. Usually To solve such complex problems, a meta-heuristic method such as genetic algorithm could be a good candidate. In this paper, Genetic Algorithm (GA) is used for the allocation of different amount of water to a number of farms. In this model, the amount of water transferable using canals of level one, in one period of irrigation is specified. In addition, the amount of water required by each farm is calculated using crop type, stage of crop development, and other parameters. Using these, the water production function of each farm is determined. Then, using the water production function, farm areas, and the revenue and cost of each crop type, the objective function is calculated. This objective function is used by GA for the allocation of water to the farms. The objective function is defined such that the economical profit extracted from all farms is maximized. Moreover, the limitation related to the amount of available water is considered as a constraint. In general, the total amount of allocated water should be less than the finally available water (the water transferred trough the level one canals). Because of the intensive scarcity of water, the deficit irrigation method are considered. In this method, the planning is on the basis of the optimum and limited allocation of water, and not on the basis of the each crop water requirement. According to the available literature, in the condition of water scarcity, the implementation of deficit irrigation strategy results in higher economical income. The main difference of this research with others is the allocation of water to the farms. Whilst, most of similar researches concentrate on the allocation of water to different water consumption sections (such as agriculture, industry etc.), networks and crops. Using the GA for the optimization of the water allocation, proper solutions were generated that maximize the total economical income in the entire study area. In addition, although the search space was considerably wide, the results of the implementation showed an adequate convergence speed. The repeatability test of the algorithm also proved that the algorithm is reasonably stable. In general the usage of GA algorithm can be considered as an efficient and trustable method for such irrigation planning problems. By optimum allocation of the water to the farms with different areas and crop types, and considering the deficit irrigation method, the general income of the entire area can be improved substantially.

Truth in Advertising: Disclosure of Participant Payment in Research Recruitment Materials.

PubMed

Gelinas, Luke; Lynch, Holly Fernandez; Largent, Emily A; Shachar, Carmel; Cohen, I Glenn; Bierer, Barbara E

2018-05-01

The practice of paying research participants has received significant attention in the bioethics literature, but the focus has been almost exclusively on consideration of factors relevant to determining acceptable payment amounts. Surprisingly little attention has been paid to what happens once the payment amount is set. What are the ethical parameters around how offers of payment may be advertised to prospective participants? This article seeks to answer this question, focusing on the ethical and practical issues associated with disclosing information about payment, and payment amounts in particular, in recruitment materials. We argue that it is permissible-and indeed typically ethically desirable-for recruitment materials to disclose the amount that participants will be paid. Further, we seek to clarify the regulatory guidance on "emphasizing" payment in a way that can facilitate design and review of recruitment materials.

The ENSO Effects on Tropical Clouds and Top-of-Atmosphere Cloud Radiative Effects in CMIP5 Models

NASA Technical Reports Server (NTRS)

Su, Wenying; Wang, Hailan

2015-01-01

The El Nino-Southern Oscillation (ENSO) effects on tropical clouds and top-of-atmosphere (TOA) cloud radiative effects (CREs) in Coupled Model Intercomparison Project Phase5 (CMIP5) models are evaluated using satellite-based observations and International Satellite Cloud Climatology Project satellite simulator output. Climatologically, most CMIP5 models produce considerably less total cloud amount with higher cloud top and notably larger reflectivity than observations in tropical Indo-Pacific (60 degrees East - 200 degrees East; 10 degrees South - 10 degrees North). During ENSO, most CMIP5 models considerably underestimate TOA CRE and cloud changes over western tropical Pacific. Over central tropical Pacific, while the multi-model mean resembles observations in TOA CRE and cloud amount anomalies, it notably overestimates cloud top pressure (CTP) decreases; there are also substantial inter-model variations. The relative effects of changes in cloud properties, temperature and humidity on TOA CRE anomalies during ENSO in the CMIP5 models are assessed using cloud radiative kernels. The CMIP5 models agree with observations in that their TOA shortwave CRE anomalies are primarily contributed by total cloud amount changes, and their TOA longwave CRE anomalies are mostly contributed by changes in both total cloud amount and CTP. The model biases in TOA CRE anomalies particularly the strong underestimations over western tropical Pacific are, however, mainly explained by model biases in CTP and cloud optical thickness (tau) changes. Despite the distinct model cloud biases particularly in tau regime, the TOA CRE anomalies from cloud amount changes are comparable between the CMIP5 models and observations, because of the strong compensations between model underestimation of TOA CRE anomalies from thin clouds and overestimation from medium and thick clouds.

Can IR scene projectors reduce total system cost?

NASA Astrophysics Data System (ADS)

Ginn, Robert; Solomon, Steven

2006-05-01

There is an incredible amount of system engineering involved in turning the typical infrared system needs of probability of detection, probability of identification, and probability of false alarm into focal plane array (FPA) requirements of noise equivalent irradiance (NEI), modulation transfer function (MTF), fixed pattern noise (FPN), and defective pixels. Unfortunately, there are no analytic solutions to this problem so many approximations and plenty of "seat of the pants" engineering is employed. This leads to conservative specifications, which needlessly drive up system costs by increasing system engineering costs, reducing FPA yields, increasing test costs, increasing rework and the never ending renegotiation of requirements in an effort to rein in costs. These issues do not include the added complexity to the FPA factory manager of trying to meet varied, and changing, requirements for similar products because different customers have made different approximations and flown down different specifications. Scene generation technology may well be mature and cost effective enough to generate considerable overall savings for FPA based systems. We will compare the costs and capabilities of various existing scene generation systems and estimate the potential savings if implemented at several locations in the IR system fabrication cycle. The costs of implementing this new testing methodology will be compared to the probable savings in systems engineering, test, rework, yield improvement and others. The diverse requirements and techniques required for testing missile warning systems, missile seekers, and FLIRs will be defined. Last, we will discuss both the hardware and software requirements necessary to meet the new test paradigm and discuss additional cost improvements related to the incorporation of these technologies.

Efficient Reverse-Engineering of a Developmental Gene Regulatory Network

PubMed Central

Cicin-Sain, Damjan; Ashyraliyev, Maksat; Jaeger, Johannes

2012-01-01

Understanding the complex regulatory networks underlying development and evolution of multi-cellular organisms is a major problem in biology. Computational models can be used as tools to extract the regulatory structure and dynamics of such networks from gene expression data. This approach is called reverse engineering. It has been successfully applied to many gene networks in various biological systems. However, to reconstitute the structure and non-linear dynamics of a developmental gene network in its spatial context remains a considerable challenge. Here, we address this challenge using a case study: the gap gene network involved in segment determination during early development of Drosophila melanogaster. A major problem for reverse-engineering pattern-forming networks is the significant amount of time and effort required to acquire and quantify spatial gene expression data. We have developed a simplified data processing pipeline that considerably increases the throughput of the method, but results in data of reduced accuracy compared to those previously used for gap gene network inference. We demonstrate that we can infer the correct network structure using our reduced data set, and investigate minimal data requirements for successful reverse engineering. Our results show that timing and position of expression domain boundaries are the crucial features for determining regulatory network structure from data, while it is less important to precisely measure expression levels. Based on this, we define minimal data requirements for gap gene network inference. Our results demonstrate the feasibility of reverse-engineering with much reduced experimental effort. This enables more widespread use of the method in different developmental contexts and organisms. Such systematic application of data-driven models to real-world networks has enormous potential. Only the quantitative investigation of a large number of developmental gene regulatory networks will allow us to discover whether there are rules or regularities governing development and evolution of complex multi-cellular organisms. PMID:22807664

Progress in the Assessment of Waste-forms for the Immobilisation of UK Civil Plutonium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison, M.T.; Scales, C.R.; Maddrell, E.R.

The alternatives for the disposition of the UK's civil plutonium stocks are currently being investigated by Nexia Solutions Ltd. on behalf of the Nuclear Decommissioning Authority (NDA). A number of scenarios are currently being considered depending on the strategic requirements of the UK. The two main disposition options are: re-use as MOX (Mixed Oxide) fuel in reactors, or immobilisation in the event of any material being declared surplus to requirements. The amount of Pu which will require immobilisation will depend on future UK nuclear strategy, along with the extent of any stocks deemed unsuitable for re-use. However, it is likelymore » that some portion will have to be immobilised and therefore three credible waste-forms are under consideration; ceramic, glass and 'immobilisation' MOX. These are currently being developed and assessed in a systematic programme that involves periodic evaluation against a range of criteria. In this way, by down-selecting on the basis of robust and technical review, the most appropriate option for immobilising surplus civil plutonium in the UK can be recommended. The latest results from the immobilisation experimental programme are presented following the de-selection of the least favourable glass and ceramic candidates. The main criteria for this decision were waste loading, durability, processability, criticality and proliferation resistance. In addition, the durability of unirradiated MOX fuel is being examined to determine its potential as a wasteform for Pu, and recent leach test data is discussed. The current evaluation comprises not only a comparison of the relevant physical properties of the various waste-forms, but also key processing parameters, e.g. glass viscosity and melter technology, ceramic fabrication routes, and criticality issues. Other important aspects of the long-term behaviour of the waste-forms under consideration in a potential repository environment, such as radiation damage, criticality control and the properties of any neutron poisons present, are also included. (authors)« less

77 FR 68121 - Notice of Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-15

... Acting Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters..., Consumer Financial Protection Bureau), seconded by Director Thomas M. Hoenig (Appointive), concurred in by... earlier notice of the meeting was practicable; that the public interest did not require consideration of...

78 FR 56229 - Sunshine Act Meeting Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-12

..., Consumer Financial Protection Bureau), Director Thomas J. Curry (Comptroller of the Currency), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be... the meeting was practicable; that the public interest did not require consideration of the matters in...

78 FR 3895 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-17

..., Consumer Financial Protection Bureau), Director Thomas J. Curry (Comptroller of the Currency), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be... the meeting was practicable; that the public interest did not require consideration of the matters in...

13 CFR 120.847 - Requirements for the Loan Loss Reserve Fund (LLRF).

Code of Federal Regulations, 2011 CFR

2011-01-01

... by all parties in a timely fashion, and that all required deposits are made. (b) PCLP CDC Exposure... establish and maintain an LLRF equal to one percent of the original principal amount (the face amount) of...

13 CFR 120.847 - Requirements for the Loan Loss Reserve Fund (LLRF).

Code of Federal Regulations, 2010 CFR

2010-01-01

... by all parties in a timely fashion, and that all required deposits are made. (b) PCLP CDC Exposure... establish and maintain an LLRF equal to one percent of the original principal amount (the face amount) of...

Cover crops in vegetable production systems

USDA-ARS?s Scientific Manuscript database

Current vegetable production systems require an intensive amount Current vegetable production systems require an intensive amount of work and inputs, and if not properly managed could have detrimental effects on soil and the environment. Practices such as intensive tillage, increased herbicide use, ...

33 CFR 135.203 - Amount required.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Amount required. 135.203 Section 135.203 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OFFSHORE OIL POLLUTION COMPENSATION FUND...

33 CFR 135.203 - Amount required.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Amount required. 135.203 Section 135.203 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OFFSHORE OIL POLLUTION COMPENSATION FUND...

33 CFR 135.203 - Amount required.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Amount required. 135.203 Section 135.203 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OFFSHORE OIL POLLUTION COMPENSATION FUND...

33 CFR 135.203 - Amount required.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Amount required. 135.203 Section 135.203 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OFFSHORE OIL POLLUTION COMPENSATION FUND...

33 CFR 135.203 - Amount required.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Amount required. 135.203 Section 135.203 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OFFSHORE OIL POLLUTION COMPENSATION FUND...

Growing fresh food on future space missions: Environmental conditions and crop management.

PubMed

Meinen, Esther; Dueck, Tom; Kempkes, Frank; Stanghellini, Cecilia

2018-05-17

This paper deals with vegetable cultivation that could be faced in a space mission. This paper focusses on optimization, light, temperature and the harvesting process, while other factors concerning cultivation in space missions, i.e. gravity, radiation, were not addressed. It describes the work done in preparation of the deployment of a mobile test facility for vegetable production of fresh food at the Neumayer III Antarctic research station. A selection of vegetable crops was grown under varying light and temperature conditions to quantify crop yield response to climate factors that determine resource requirement of the production system. Crops were grown at 21 °C or 25 °C under light treatments varying from 200 to 600 μmol m -2   s -1 and simulated the dusk and dawn light spectrum. Fresh food biomass was harvested as spread harvesting (lettuce), before and after regrowth (herbs) and at the end of cultivation. Lettuce and red mustard responded well to increasing light intensities, by 35-90% with increasing light from 200 to 600 μmol m -2  s -1 , while the other crops responded more variably. However, the quality of the leafy greens often deteriorated at higher light intensities. The fruit biomass of both determinate tomato and cucumber increased by 8-15% from 300 to 600 μmol m -2  s -1 . With the increase in biomass, the number of tomato fruits also increased, while the number of cucumber fruits decreased, resulting in heavier individual fruits. Increasing the temperature had varied effects on production. While in some cases the production increased, regrowth of herbs often lagged behind in the 25 °C treatment. In terms of fresh food production, the most can be expected from lettuce, cucumber, radish, then tomato, although the 2 fruit vegetables require a considerable amount of crop management. Spread harvesting had a large influence on the amount of harvested biomass per unit area. In particular, yield of the 3 lettuce cultivars and spinach was ca. 400% than single harvesting. Increasing plant density and applying spread harvesting increased fresh food production. This information will be the basis for determining crop growth recipes and management to maximize the amount of fresh food available, in view of the constraints of space and energy requirement of such a production system.

Fats and oils: An overview

USDA-ARS?s Scientific Manuscript database

Dietary fat is a macronutrient that has historically engendered considerable controversy and continues to do so. Contentious areas include optimal amount and type for cardiovascular disease risk reduction, and role in body weight regulation. Dietary fats and oils are unique in modern times in that ...

Relationships of Type A behavior with biographical characteristics and training performance of air traffic control specialists.

DOT National Transportation Integrated Search

1994-07-01

While there has been a considerable amount of research concerning the relationships between various cognitive measures and the selection and subsequent performance of Air Traffic Control Specialists (ATCSs), data concerning the potential importance o...

Strong motion instrumentation plan for Utah Department of Transportation.

DOT National Transportation Integrated Search

2012-01-18

The State of Utah, and its people have invested a considerable amount of money to construct and maintain the infrastructure and bridges in the state. This entire transportation network is at risk in the event of an earthquake. To protect Utah's bridg...

Subduction Zones: Facts, Ideas, and Speculations.

ERIC Educational Resources Information Center

Uyeda, Seiya

1979-01-01

Recent research studies of both classifications of ocean margins (active or of Pacific type and passive or of Atlantic variety) have yielded a considerable amount of new information leading to some new theories. These theories regarding different kinds of tectonic activity are discussed. (BT)

On - road mobile source pollutant emissions : identifying hotspots and ranking roads.

DOT National Transportation Integrated Search

2010-12-30

A considerable amount of pollution to the air in the forms of hydrocarbons, carbon : monoxide (CO), nitrogen oxides (NOx), particulate matter (PM) and air toxics comes : from the on-road mobile sources. Estimation of the emissions of these pollutants...

Health Assessment Document for Ethylene Oxide (External Review Draft)

EPA Science Inventory

The largest single use of ethylene oxide is an intermediate in the synthesis of ethylene glycol. However, small amounts of this epoxide are used as a sterilant or pesticide in commodities, pharmaceuticals, medical devices, tobacco, and other items, representing a considerable pot...

Managing uncertainty in flood protection planning with climate projections

NASA Astrophysics Data System (ADS)

Dittes, Beatrice; Špačková, Olga; Schoppa, Lukas; Straub, Daniel

2018-04-01

Technical flood protection is a necessary part of integrated strategies to protect riverine settlements from extreme floods. Many technical flood protection measures, such as dikes and protection walls, are costly to adapt after their initial construction. This poses a challenge to decision makers as there is large uncertainty in how the required protection level will change during the measure lifetime, which is typically many decades long. Flood protection requirements should account for multiple future uncertain factors: socioeconomic, e.g., whether the population and with it the damage potential grows or falls; technological, e.g., possible advancements in flood protection; and climatic, e.g., whether extreme discharge will become more frequent or not. This paper focuses on climatic uncertainty. Specifically, we devise methodology to account for uncertainty associated with the use of discharge projections, ultimately leading to planning implications. For planning purposes, we categorize uncertainties as either visible, if they can be quantified from available catchment data, or hidden, if they cannot be quantified from catchment data and must be estimated, e.g., from the literature. It is vital to consider the hidden uncertainty, since in practical applications only a limited amount of information (e.g., a finite projection ensemble) is available. We use a Bayesian approach to quantify the visible uncertainties and combine them with an estimate of the hidden uncertainties to learn a joint probability distribution of the parameters of extreme discharge. The methodology is integrated into an optimization framework and applied to a pre-alpine case study to give a quantitative, cost-optimal recommendation on the required amount of flood protection. The results show that hidden uncertainty ought to be considered in planning, but the larger the uncertainty already present, the smaller the impact of adding more. The recommended planning is robust to moderate changes in uncertainty as well as in trend. In contrast, planning without consideration of bias and dependencies in and between uncertainty components leads to strongly suboptimal planning recommendations.

Toward accelerating landslide mapping with interactive machine learning techniques

NASA Astrophysics Data System (ADS)

Stumpf, André; Lachiche, Nicolas; Malet, Jean-Philippe; Kerle, Norman; Puissant, Anne

2013-04-01

Despite important advances in the development of more automated methods for landslide mapping from optical remote sensing images, the elaboration of inventory maps after major triggering events still remains a tedious task. Image classification with expert defined rules typically still requires significant manual labour for the elaboration and adaption of rule sets for each particular case. Machine learning algorithm, on the contrary, have the ability to learn and identify complex image patterns from labelled examples but may require relatively large amounts of training data. In order to reduce the amount of required training data active learning has evolved as key concept to guide the sampling for applications such as document classification, genetics and remote sensing. The general underlying idea of most active learning approaches is to initialize a machine learning model with a small training set, and to subsequently exploit the model state and/or the data structure to iteratively select the most valuable samples that should be labelled by the user and added in the training set. With relatively few queries and labelled samples, an active learning strategy should ideally yield at least the same accuracy than an equivalent classifier trained with many randomly selected samples. Our study was dedicated to the development of an active learning approach for landslide mapping from VHR remote sensing images with special consideration of the spatial distribution of the samples. The developed approach is a region-based query heuristic that enables to guide the user attention towards few compact spatial batches rather than distributed points resulting in time savings of 50% and more compared to standard active learning techniques. The approach was tested with multi-temporal and multi-sensor satellite images capturing recent large scale triggering events in Brazil and China and demonstrated balanced user's and producer's accuracies between 74% and 80%. The assessment also included an experimental evaluation of the uncertainties of manual mappings from multiple experts and demonstrated strong relationships between the uncertainty of the experts and the machine learning model.

Satellite Material Type and Phase Function Determination in Support of Orbital Debris Size Estimation

NASA Technical Reports Server (NTRS)

Hejduk, M. D.; Cowardin, H. M.; Stansbery, Eugene G.

2012-01-01

In performing debris surveys of deep-space orbital regions, the considerable volume of the area to be surveyed and the increased orbital altitude suggest optical telescopes as the most efficient survey instruments; but to proceed this way, methodologies for debris object size estimation using only optical tracking and photometric information are needed. Basic photometry theory indicates that size estimation should be possible if satellite albedo and shape are known. One method for estimating albedo is to try to determine the object's material type photometrically, as one can determine the albedos of common satellite materials in the laboratory. Examination of laboratory filter photometry (using Johnson BVRI filters) on a set of satellite material samples indicates that most material types can be separated at the 1-sigma level via B-R versus R-I color differences with a relatively small amount of required resampling, and objects that remain ambiguous can be resolved by B-R versus B-V color differences and solar radiation pressure differences. To estimate shape, a technique advanced by Hall et al. [1], based on phase-brightness density curves and not requiring any a priori knowledge of attitude, has been modified slightly to try to make it more resistant to the specular characteristics of different materials and to reduce the number of samples necessary to make robust shape determinations. Working from a gallery of idealized debris shapes, the modified technique identifies most shapes within this gallery correctly, also with a relatively small amount of resampling. These results are, of course, based on relatively small laboratory investigations and simulated data, and expanded laboratory experimentation and further investigation with in situ survey measurements will be required in order to assess their actual efficacy under survey conditions; but these techniques show sufficient promise to justify this next level of analysis.

Transformation of Bacillus subtilis by DNA bound on montmorillonite and effect of DNase on the transforming ability of bound DNA.

PubMed Central

Khanna, M; Stotzky, G

1992-01-01

The equilibrium adsorption and binding of DNA from Bacillus subtilis on the clay mineral montmorillonite, the ability of bound DNA to transform competent cells, and the resistance of bound DNA to degradation by DNase I are reported. Maximum adsorption of DNA on the clay occurred after 90 min of contact and was followed by a plateau. Adsorption was pH dependent and was greatest at pH 1.0 (19.9 micrograms of DNA mg of clay-1) and least at pH 9.0 (10.7 micrograms of DNA mg of clay-1). The transformation frequency increased as the pH at which the clay-DNA complexes were prepared increased, and there was no transformation by clay-DNA complexes prepared at pH 1. After extensive washing with deionized distilled water (pH 5.5) or DNA buffer (pH 7.5), 21 and 28%, respectively, of the DNA remained bound. Bound DNA was capable of transforming competent cells (as was the desorbed DNA), indicating that adsorption, desorption, and binding did not alter the transforming ability of the DNA. Maximum transformation by bound DNA occurred at 37 degrees C (the other temperatures evaluated were 0, 25, and 45 degrees C). DNA bound on montmorillonite was protected against degradation by DNase, supporting the concept that "cryptic genes" may persist in the environment when bound on particulates. The concentration of DNase required to inhibit transformation by bound DNA was higher than that required to inhibit transformation by comparable amounts of free DNA, and considerably more bound than free DNase was required to inhibit transformation by the same amount of free DNA. Similarly, when DNA and DNase were bound on the same or separate samples of montmorillonite, the bound DNA was protected from the activity of DNase. PMID:1622268

The role of explicit and implicit self-esteem in peer modeling of palatable food intake: a study on social media interaction among youngsters.

PubMed

Bevelander, Kirsten E; Anschütz, Doeschka J; Creemers, Daan H M; Kleinjan, Marloes; Engels, Rutger C M E

2013-01-01

This experimental study investigated the impact of peers on palatable food intake of youngsters within a social media setting. To determine whether this effect was moderated by self-esteem, the present study examined the roles of global explicit self-esteem (ESE), body esteem (BE) and implicit self-esteem (ISE). Participants (N = 118; 38.1% boys; M age 11.14±.79) were asked to play a computer game while they believed to interact online with a same-sex normal-weight remote confederate (i.e., instructed peer) who ate either nothing, a small or large amount of candy. Participants modeled the candy intake of peers via a social media interaction, but this was qualified by their self-esteem. Participants with higher ISE adjusted their candy intake to that of a peer more closely than those with lower ISE when the confederate ate nothing compared to when eating a modest (β = .26, p = .05) or considerable amount of candy (kcal) (β = .32, p = .001). In contrast, participants with lower BE modeled peer intake more than those with higher BE when eating nothing compared to a considerable amount of candy (kcal) (β = .21, p = .02); ESE did not moderate social modeling behavior. In addition, participants with higher discrepant or "damaged" self-esteem (i.e., high ISE and low ESE) modeled peer intake more when the peer ate nothing or a modest amount compared to a substantial amount of candy (kcal) (β = -.24, p = .004; β = -.26, p<.0001, respectively). Youngsters conform to the amount of palatable food eaten by peers through social media interaction. Those with lower body esteem or damaged self-esteem may be more at risk to peer influences on food intake.

The Role of Explicit and Implicit Self-Esteem in Peer Modeling of Palatable Food Intake: A Study on Social Media Interaction among Youngsters

PubMed Central

Bevelander, Kirsten E.; Anschütz, Doeschka J.; Creemers, Daan H. M.; Kleinjan, Marloes; Engels, Rutger C. M. E.

2013-01-01

Objective This experimental study investigated the impact of peers on palatable food intake of youngsters within a social media setting. To determine whether this effect was moderated by self-esteem, the present study examined the roles of global explicit self-esteem (ESE), body esteem (BE) and implicit self-esteem (ISE). Methods Participants (N = 118; 38.1% boys; M age 11.14±.79) were asked to play a computer game while they believed to interact online with a same-sex normal-weight remote confederate (i.e., instructed peer) who ate either nothing, a small or large amount of candy. Results Participants modeled the candy intake of peers via a social media interaction, but this was qualified by their self-esteem. Participants with higher ISE adjusted their candy intake to that of a peer more closely than those with lower ISE when the confederate ate nothing compared to when eating a modest (β = .26, p = .05) or considerable amount of candy (kcal) (β = .32, p = .001). In contrast, participants with lower BE modeled peer intake more than those with higher BE when eating nothing compared to a considerable amount of candy (kcal) (β = .21, p = .02); ESE did not moderate social modeling behavior. In addition, participants with higher discrepant or “damaged” self-esteem (i.e., high ISE and low ESE) modeled peer intake more when the peer ate nothing or a modest amount compared to a substantial amount of candy (kcal) (β = −.24, p = .004; β = −.26, p<.0001, respectively). Conclusion Youngsters conform to the amount of palatable food eaten by peers through social media interaction. Those with lower body esteem or damaged self-esteem may be more at risk to peer influences on food intake. PMID:24015251

77 FR 74186 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

..., Consumer Financial Protection Bureau), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be the subject of this meeting on less than seven days... not require consideration of the matters in a meeting open to public observation; and that the matters...

43 CFR 404.34 - Can Reclamation reduce the amount of non-Federal cost-share required for a feasibility study?

Code of Federal Regulations, 2011 CFR

2011-10-01

...-Federal cost-share required for a feasibility study? 404.34 Section 404.34 Public Lands: Interior... for a feasibility study? Yes. Reclamation may reduce the non-Federal cost-share required for a feasibility study to an amount less than 50 percent of the study costs if: (a) Reclamation determines that...

Effect of reproductive rate on minimum habitat requirements of forest-breeding birds

Treesearch

Melissa D. Vance; Lenore Fahrig; Curtis H. Flather

2003-01-01

A major challenge facing conservation biologists and wildlife managers is to predict how fauna will respond to habitat loss. Different species require different amounts of habitat for population persistence, and species’ reproductive rates have been identified as one of the major factors affecting these habitat-amount requirements. The purpose of this study was to test...

A revised estimate of the risk of carcinogenesis from x-rays to scoliosis patients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rao, P.S.; Gregg, E.C.

A considerable amount of concern has been felt recently for the risk of carcinogenesis from x-rays to scoliosis patients. This paper re-evaluates risk in quantitative terms by using some data measured by us and other data recently published in the literature. The risks are considerably smaller than had been estimated earlier. Compared with the natural incidence of cancer in the general population, the cumulative additional risk for scoliosis patients varies from 0.2% for breast carcinoma to 5% for leukemia.

29 CFR 2580.412-16 - Amount of bond required in given types of bonds or where more than one plan is insured in the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... and individual forms of bonds so long as the amount of the bond penalty is sufficient to meet the... bond must allow for recovery by each plan in an amount at least equal to that which would be required... by the terms of the bond or rider to the bond or by separate agreement among the parties concerned...

29 CFR 2580.412-16 - Amount of bond required in given types of bonds or where more than one plan is insured in the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... and individual forms of bonds so long as the amount of the bond penalty is sufficient to meet the... bond must allow for recovery by each plan in an amount at least equal to that which would be required... by the terms of the bond or rider to the bond or by separate agreement among the parties concerned...

29 CFR 2580.412-16 - Amount of bond required in given types of bonds or where more than one plan is insured in the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... and individual forms of bonds so long as the amount of the bond penalty is sufficient to meet the... bond must allow for recovery by each plan in an amount at least equal to that which would be required... by the terms of the bond or rider to the bond or by separate agreement among the parties concerned...

29 CFR 2580.412-16 - Amount of bond required in given types of bonds or where more than one plan is insured in the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... and individual forms of bonds so long as the amount of the bond penalty is sufficient to meet the... bond must allow for recovery by each plan in an amount at least equal to that which would be required... by the terms of the bond or rider to the bond or by separate agreement among the parties concerned...

29 CFR 2580.412-16 - Amount of bond required in given types of bonds or where more than one plan is insured in the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... and individual forms of bonds so long as the amount of the bond penalty is sufficient to meet the... bond must allow for recovery by each plan in an amount at least equal to that which would be required... by the terms of the bond or rider to the bond or by separate agreement among the parties concerned...

Disinfection by-products and microbial contamination in the treatment of pool water with granular activated carbon.

PubMed

Uhl, W; Hartmann, C

2005-01-01

For swimming pools, it is generally agreed that free chlorine levels have to be maintained to guarantee adequate disinfection. Recommended free chlorine levels can vary between 0.3 and 0.6 mg/L in Germany and up to 3 mg/L in other countries. Bathers introduce considerable amounts of organic matter, mainly in the form of such as urine and sweat, into the pool water. As a consequence, disinfection byproducts (DBPs) are formed. Regulations in Germany recommend levels of combined chlorine of less than 0.2 mg/L and levels of trihalomethanes (THMs) of less than 20 microg/L. Haloacetic acids (HAAs), haloacetonitriles (HANs), chloropicrin and chloral hydrate are also detected in considerable amounts. However, these compounds are not regulated yet. Swimming pool staff and swimmers, especially athletes, are primarily exposed to these byproducts by inhalation and/or dermal uptake. In Germany, new regulations for swimming pool water treatment generally require the use of activated carbon. In this project, three different types of granular activated carbon (GAC) (one standard GAC, two catalytic GACs) are compared for their long time behaviour in pool water treatment. In a pilot plant operated with real swimming pool water, production and removal of disinfection byproducts (THMs, HAAs, AOXs), of biodegradable substances (AOC), of bacteria (Pseudomonas aeruginosa, Legionella, coliforms, HPC) as well as the removal of chlorine and chloramines are monitored as function of GAC bed depth. Combined chlorine penetrates deeper in the filter bed than free chlorine does. However, both, free and combined chlorine removal efficiencies decrease over the time of filter operation. The decreases of removal efficiencies are also observed for parameters such as dissolved organic carbon, spectral absorption coefficient, adsorbable organic carbon and most of the disinfection byproducts. However, THMs, especially chloroform are produced in the filter bed. The GAC beds were contaminated microbially, especially with P. aeruginosa. The contamination was not removable by backwashing with chlorine concentrations up to 2 mg/l free chlorine.

Gastroenterological surgery for patients with chronic respiratory insufficiency.

PubMed

Shimada, M; Kano, T; Matsuzaki, Y; Miyazaki, N; Ninomiya, K

1998-01-01

The aim of this study was to clarify the surgical indications for patients with chronic respiratory insufficiency. Fourteen patients with chronic respiratory insufficiency who underwent abdominal surgical procedures, were retrospectively studied. The surgical indications were carefully determined based primarily on the performance status (PS) of each patient and cardiopulmonary function tests. A PS of equal to or less than 3, which meant the patient's status required bed rest > 50% of the time, and the need for assistance in performing normal activities were all factors considered for surgical indications. During the period studied, two patients were excluded from the surgical indications due to the fact that one was at a terminal stage of pulmonary disease and was completely bedridden (PS = 4), while the other demonstrated active pneumonia with a considerable amount of purulent sputa. Regarding the pulmonary function tests for patients who underwent surgery, the lowest limits of those examinations were as follows: 810 ml of vital capacity (VC), 23.8% of predicted VC, 610 ml of forced expiratory volume in one second (FEV1.0), 38.6% of predicted FEV1.0, 50.5 mmHg of PaO2 while inhaling 4 liters of oxygen and 73.8 mmHg of PaCO2. No surgery related mortality or hospital death within 30 days after operation was observed. Only two patients had cardiopulmonary complications (consisting of pulmonary edema with atrial fibrillation in one patient, and acute myocardial infarction in another patient). However, neither pneumonia, prolonged ventilatory support for more than 2 days, nor the need for a tracheostomy after surgery was observed. Gastroenterological surgery is thus considered to be indicated even for patients with chronic respiratory insufficiency, as long as the PS can be maintained (PS of equal to or less than 3) and no active pneumonia with a considerable amount of purulent sputa is present.

Widespread confusion in the modeling of Europa's magnetospheric interaction: what the potential modeler should consider before getting started

NASA Astrophysics Data System (ADS)

Cassidy, T. A.

2016-12-01

Understanding Europa's interaction with Jupiter's magnetosphere is a critical part of the ocean sounding objective of the upcoming Clipper mission and interpretation of these observations will require modeling efforts that build upon studies done over the last four decades. Unfortunately, these studies are often confusing and contradictory. There is, as yet, no community consensus on the assumptions and parameters that go into such models. There is enough uncertainty in this problem that I cannot tell anyone, with certainty, what they should and should not do, but in this presentation I will outline what modelers should at least consider before starting. The most important consideration that is often missing in the literature is plasma flow diversion. Many papers assume that Europa's interaction is lunar-like; a completely absorbing barrier. Data and plasma models show that there is likely significant diversion, and such diversion could prevent the bulk of magnetospheric plasa particles from reaching the surface. On the other hand, some models likely overestimate the amount of diversion: we do know that a significant amount of plasma must reach the surface in order to produce the atmosphere via sputtering and radiolysis, but most plasma models usually treat the atmosphere as a fixed boundary condition. A second consideration is energy range of particles responsible for radiolysis and sputtering. The particles bombarding the surface range from thermal plasma (eV-keV) to non-thermal (keV-MeV), but to many modelers, it seems, these are indistinguishable despite drastic differences in how these populations interact with the moon. To illustrate this confusion, the attached figure shows the O2 source rate (O2 is likely the dominant atmospheric component) from published Europa atmosphere/plasma models. There is little agreement on either the source rate or the particle population responsible for its production. Finally, I will discuss how experiences with other planetary bodies can inform Europa science.

Simple Myths and Basic Maths about Greening Irrigation

NASA Astrophysics Data System (ADS)

Dionisio Pérez-Blanco, C.; Gómez, C. Mario

2014-05-01

Managing water is a very complex societal issue that needs to involve legal, environmental, technological, financial and political considerations that are difficult to co-ordinate in an effective manner. This complexity and the lack of an agreed assessment framework have often implied that political decisions, largely driven by transaction costs (especially the bargaining costs required to come to an acceptable agreement with all the parties involved), have overshadowed and prevailed over other considerations. As a result, (financially) expensive solutions such as irrigation modernization programmes have been preferred to their inexpensive alternatives to save water, such as quotas or pricing policies. However, greening the economy is mostly about improving water governance and not only about putting the existing resource saving technical alternatives into practice. Focusing on the second and forgetting the first risks finishing with a highly efficient use of water services at the level of each individual user but with an unsustainable amount of water use for the entire economy. This might be happening already in many places with the modernization of irrigated agriculture, the world's largest water user and the one offering the most promising water saving opportunities. In spite of high expectations, costly modern irrigation techniques seem not to be contributing to reduce water scarcity and increase drought resiliency. In fact, according to the little evidence available, in some areas they are resulting in higher water use. Building on basic economic principles this study aims to show the conditions under which this apparently paradoxical outcome, known as the Jevons' Paradox, might appear. This basic model is expected to serve as guidance for assessing the actual outcomes of increasing irrigation efficiency and to discuss the changes in water governance that would be required for this to make a real contribution to sustainable water management.

A Historical Systems Study of Liquid Rocket Engine Throttling Capabilities

NASA Technical Reports Server (NTRS)

Betts, Erin M.; Frederick, Robert A., Jr.

2010-01-01

This is a comprehensive systems study to examine and evaluate throttling capabilities of liquid rocket engines. The focus of this study is on engine components, and how the interactions of these components are considered for throttling applications. First, an assessment of space mission requirements is performed to determine what applications require engine throttling. A background on liquid rocket engine throttling is provided, along with the basic equations that are used to predict performance. Three engines are discussed that have successfully demonstrated throttling. Next, the engine system is broken down into components to discuss special considerations that need to be made for engine throttling. This study focuses on liquid rocket engines that have demonstrated operational capability on American space launch vehicles, starting with the Apollo vehicle engines and ending with current technology demonstrations. Both deep throttling and shallow throttling engines are discussed. Boost and sustainer engines have demonstrated throttling from 17% to 100% thrust, while upper stage and lunar lander engines have demonstrated throttling in excess of 10% to 100% thrust. The key difficulty in throttling liquid rocket engines is maintaining an adequate pressure drop across the injector, which is necessary to provide propellant atomization and mixing. For the combustion chamber, cooling can be an issue at low thrust levels. For turbomachinery, the primary considerations are to avoid cavitation, stall, surge, and to consider bearing leakage flows, rotordynamics, and structural dynamics. For valves, it is necessary to design valves and actuators that can achieve accurate flow control at all thrust levels. It is also important to assess the amount of nozzle flow separation that can be tolerated at low thrust levels for ground testing.

US DOE-EM On-Site Disposal Cell Working Group - Fostering Communication On Performance Assessment Challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seitz, Roger R.; Suttora, Linda C.; Phifer, Mark

On-site disposal cells are in use and being considered at several U.S. Department of Energy (USDOE) sites as the final disposition for large amounts of waste associated with cleanup of contaminated areas and facilities. These facilities are typically developed with regulatory oversight from States and/or the US Environmental Protection Agency (USEPA) in addition to USDOE. The facilities are developed to meet design standards for disposal of hazardous waste as well as the USDOE performance based standards for disposal of radioactive waste. The involvement of multiple and different regulators for facilities across separate sites has resulted in some differences in expectationsmore » for performance assessments and risk assessments (PA/RA) that are developed for the disposal facilities. The USDOE-EM Office of Site Restoration formed a working group to foster improved communication and sharing of information for personnel associated with these Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) disposal cells and work towards more consistent assumptions, as appropriate, for technical and policy considerations related to performance and risk assessments in support of a Record of Decision and Disposal Authorization Statement. The working group holds teleconferences, as needed, focusing on specific topics of interest. The topics addressed to date include an assessment of the assumptions used for performance assessments and risk assessments (PA/RAs) for on-site disposal cells, requirements and assumptions related to assessment of inadvertent intrusion, DOE Manual 435.1-1 requirements, and approaches for consideration of the long-term performance of liners and covers in the context of PAs. The working group has improved communication among the staff and oversight personnel responsible for onsite disposal cells and has provided a forum to identify and resolve common concerns.« less

Mapping of H.264 decoding on a multiprocessor architecture

NASA Astrophysics Data System (ADS)

van der Tol, Erik B.; Jaspers, Egbert G.; Gelderblom, Rob H.

2003-05-01

Due to the increasing significance of development costs in the competitive domain of high-volume consumer electronics, generic solutions are required to enable reuse of the design effort and to increase the potential market volume. As a result from this, Systems-on-Chip (SoCs) contain a growing amount of fully programmable media processing devices as opposed to application-specific systems, which offered the most attractive solutions due to a high performance density. The following motivates this trend. First, SoCs are increasingly dominated by their communication infrastructure and embedded memory, thereby making the cost of the functional units less significant. Moreover, the continuously growing design costs require generic solutions that can be applied over a broad product range. Hence, powerful programmable SoCs are becoming increasingly attractive. However, to enable power-efficient designs, that are also scalable over the advancing VLSI technology, parallelism should be fully exploited. Both task-level and instruction-level parallelism can be provided by means of e.g. a VLIW multiprocessor architecture. To provide the above-mentioned scalability, we propose to partition the data over the processors, instead of traditional functional partitioning. An advantage of this approach is the inherent locality of data, which is extremely important for communication-efficient software implementations. Consequently, a software implementation is discussed, enabling e.g. SD resolution H.264 decoding with a two-processor architecture, whereas High-Definition (HD) decoding can be achieved with an eight-processor system, executing the same software. Experimental results show that the data communication considerably reduces up to 65% directly improving the overall performance. Apart from considerable improvement in memory bandwidth, this novel concept of partitioning offers a natural approach for optimally balancing the load of all processors, thereby further improving the overall speedup.

Phase synchronization between tropospheric radio refractivity and rainfall amount in a tropical region

NASA Astrophysics Data System (ADS)

Fuwape, Ibiyinka A.; Ogunjo, Samuel T.; Dada, Joseph B.; Ashidi, Gabriel A.; Emmanuel, Israel

2016-11-01

This study investigated linear and nonlinear relationship between the amount of rainfall and radio refractivity in a tropical country, Nigeria using forty seven locations scattered across the country. Correlation and Phase synchronization measures were used for the linear and nonlinear relationship respectively. Weak correlation and phase synchronization was observed between seasonal mean rainfall amount and radio refractivity while strong phase synchronization was found for the detrended data suggesting similar underlying dynamics between rainfall amount and radio refractivity. Causation between rainfall and radio refractivity in a tropical location was studied using Granger causality test. In most of the Southern locations, rainfall was found to Granger cause radio refractivity. Furthermore, it was observed that there is strong correlation between mean rainfall amount and the phase synchronization index over Nigeria. Coupling between rainfall and radio refractivity has been found to be due to water vapour in the atmosphere. Frequency planning and budgeting for microwave propagation during periods of high rainfall should take into consideration this nonlinear relationship.

Statistical Analysis Techniques for Small Sample Sizes

NASA Technical Reports Server (NTRS)

Navard, S. E.

1984-01-01

The small sample sizes problem which is encountered when dealing with analysis of space-flight data is examined. Because of such a amount of data available, careful analyses are essential to extract the maximum amount of information with acceptable accuracy. Statistical analysis of small samples is described. The background material necessary for understanding statistical hypothesis testing is outlined and the various tests which can be done on small samples are explained. Emphasis is on the underlying assumptions of each test and on considerations needed to choose the most appropriate test for a given type of analysis.

Coexisting cummingtonite and aluminous hornblende from garnet amphibolite, Boehls Butte area, Idaho, USA

USGS Publications Warehouse

Hietanen, A.

1973-01-01

Electron microprobe analyses of green hornblende and coexisting cummingtonite from garnet amphibolite show identical Fe/Mg ratios ( = 0.9). Cummingtonite is iron-magnesium silicate with very little calcium and aluminum and practically no alkalies. In contrast, the hornblende has 1.5 tetrahedral Al, 0.9 octahedral Al and a considerable amount of Ca and alkalies. Comparison with the hornblendes from the Sierra Nevada shows a higher relative amount of tschemakite molecule in the hornblendes from Idaho where pressures during the recrystallization were higher. ?? 1973.

A study of engineering student attributes and time to completion of first-year required courses at Texas A&M University

NASA Astrophysics Data System (ADS)

Kimball, Jorja Lay

For many years, colleges of engineering across the nation have required that a foundational set of courses be completed for entry into upper division coursework or into a specific engineering major. Since 1998, The Dwight Look College of Engineering at Texas A&M University (TAMU) has required that incoming first-time enrolling students complete a Core Body of Knowledge (CBK) with specific cumulative grade points required for specific majors. However, considerations of the time to completion of coursework and other student characteristics and academic factors have not been taken into consideration by TAMU, like most institutions. The purpose of this study is to determine for first year engineering students at TAMU the relationship of gender, ethnicity, engineering major, unmet financial need, cumulative grade point average, and total transfer hours on time to completion of CBK courses. The results of the analysis showed that cumulative grade point average (CGPA) had the strongest relationship to completion of CBK of any independent variable in this study. Statistical significance was found for the following variables in this study: CGPA, gender, ethnicity, and unmet financial need. For the study's variable of major, statistical significance was found for Chemical, Electrical, and Computer Engineering majors. The one variable in this study that did not show statistical significance in relation to time to completion of CBK was transfer credit. Findings with implications for recruitment and retention of underrepresented in engineering is a statistical significance indicating that on average females are taking less time than males to complete CBK. The conclusion from the study is that efforts to attract more women into engineering have merit as do programs to support underrepresented students in order that they may complete CBK at a faster pace. Further study to determine profiles of those majors where statistical significance was found for students taking a greater or lesser amount of time for CBK completion than the mean is recommended, as is ongoing data collection and comparison for current cohorts of engineering majors at TAMU.

Accounting for Uncertainty and Time Lags in Equivalency Calculations for Offsetting in Aquatic Resources Management Programs

NASA Astrophysics Data System (ADS)

Bradford, Michael J.

2017-10-01

Biodiversity offset programs attempt to minimize unavoidable environmental impacts of anthropogenic activities by requiring offsetting measures in sufficient quantity to counterbalance losses due to the activity. Multipliers, or offsetting ratios, have been used to increase the amount of offsets to account for uncertainty but those ratios have generally been derived from theoretical or ad-hoc considerations. I analyzed uncertainty in the offsetting process in the context of offsetting for impacts to freshwater fisheries productivity. For aquatic habitats I demonstrate that an empirical risk-based approach for evaluating prediction uncertainty is feasible, and if data are available appropriate adjustments to offset requirements can be estimated. For two data-rich examples I estimate multipliers in the range of 1.5:1 - 2.5:1 are sufficient to account for the uncertainty in the prediction of gains and losses. For aquatic habitats adjustments for time delays in the delivery of offset benefits can also be calculated and are likely smaller than those for prediction uncertainty. However, the success of a biodiversity offsetting program will also depend on the management of the other components of risk not addressed by these adjustments.

Wireless multihop backhauls for rural areas: A preliminary study.

PubMed

Zaidi, Zainab; Lan, Kun-Chan

2017-01-01

Rural areas have very low revenue potential. The major issue in providing low-cost broadband to rural areas is to provide reliable backhaul connections that spread over tens or even hundreds of miles, connecting villages to the nearest service provider. Along with aerial networks of Google and Facebook, there has been a considerable amount of research toward long-distance terrestrial WiFi links. As a comparison, WiFi routers are easier to be deployed and maintained by non-technical people from the local communities, whereas the aerial networks require professional support to operate. Moreover, they are still in the experimentation phase. However, the long distance WiFi links require high-gain directional antennas and very expensive tall towers for high data rates. On the other hand, multihop paths with stronger links may provide better data rates without the need of tall towers. In this paper, we evaluated the concept of using such multihop WiFi links for long backhaul connections. Our simulation results show that these networks can possibly be a cost-effective and practical solution for rural connectivity. These initial results can serve as a first step to understand the comprehensive feasibility of using multihop WiFi networks for backhaul connections in rural area.

Synthesis of methyl esters from relevant palm products in near-critical methanol with modified-zirconia catalysts.

PubMed

Laosiripojana, N; Kiatkittipong, W; Sutthisripok, W; Assabumrungrat, S

2010-11-01

The transesterification and esterification of palm products i.e. crude palm oil (CPO), refined palm oil (RPO) and palm fatty acid distillate (PFAD) under near-critical methanol in the presence of synthesized SO(4)-ZrO(2), WO(3)-ZrO(2) and TiO(2)-ZrO(2) (with various sulfur- and tungsten loadings, Ti/Zr ratios, and calcination temperatures) were studied. Among them, the reaction of RPO with 20%WO(3)-ZrO(2) (calcined at 800 degrees C) enhanced the highest fatty acid methyl ester (FAME) yield with greatest stability after several reaction cycles; furthermore, it required shorter time, lower temperature and less amount of methanol compared to the reactions without catalyst. These benefits were related to the high acid-site density and tetragonal phase formation of synthesized WO(3)-ZrO(2). For further improvement, the addition of toluene as co-solvent considerably reduced the requirement of methanol to maximize FAME yield, while the addition of molecular sieve along with catalyst significantly increased FAME yield from PFAD and CPO due to the inhibition of hydrolysis reaction. Copyright 2010 Elsevier Ltd. All rights reserved.

Megasite Management Tool (mmt): a Decision Support System Built Using Mapwindow Activex Control

NASA Astrophysics Data System (ADS)

Pulsani, B. R.

2017-11-01

Megasite Management Tool (MMT) is planning and evaluation software for contaminated sites. Using different statistical modules, MMT produces maps which help decision makers in rehabilitating contaminated sites. The input data used by MMT is of geographic nature and exists as shapefile and raster format. As MMT is built using simple windows forms application, the objective of the study was to find a way to visualize geographic data and to allow the user to edit its attribute information. Therefore, the application requirement was to find GIS libraries which offer capabilities such as (1) map viewer with navigation tools (2) library to read/write geographic data and (3) software which allows free distribution of the developed components. A research on these requirements led to the discovery of MapWindow ActiveX components which not only offered these capabilities but also provided free and open source licensing options for redistribution. Although considerable amount of reports and publications exist on MMT, the major contribution provided by MapWindow libraries have been under played. The current study emphasises upon the contribution and advantages MapWindow ActiveX provides for incorporating GIS functionality to an already existing application. Similar components for other languages have also been reviewed.

Disasters and public health

PubMed Central

Lechat, M. F.

1979-01-01

Studies on the health effects of disasters have shown that epidemiological indices can be of value in planning preventive and relief measures and in evaluating their effectiveness. Mortality rates naturally vary considerably, but in earthquakes, for example, the number of deaths per 100 houses destroyed can give an indication of the adequacy of building techniques. Age-specific mortality rates can help to identify particularly vulnerable groups and perhaps indicate what form of education would be valuable. Except in earthquakes, the number of casualties after a disaster is usually low in relation to the number of deaths, and study of the distribution and types of lesions would help in planning the amounts and types of relief supplies and personnel required. Disasters also affect the general level of morbidity in a district because of either interruption of normal health care services or of spraying or other disease control measures. Mental health and nutrition following disasters are particular problems that require further investigation. Study of all these features of disasters has been handicapped by a lack of data, particularly concerning the health situation immediately after the impact. The provision of surveillance teams in disaster-prone areas would appear to be a field in which international cooperation could yield immense benefits. PMID:311707

A mobile telephone-based SMS and internet survey system for self-assessment in Australian anaesthesia: experience of a single practitioner.

PubMed

Belavy, D

2014-11-01

Self-assessment and audit in anaesthesia require a systematic approach to postoperative data collection. The increasing prevalence of mobile internet technology offers a new data collection method for anaesthetists. In this paper, a system for mobile internet data collection is described and the preliminary experience with its use is presented. The system was developed by the author and combined an open source survey application and a short message service (SMS) gateway to send SMS messages to patients after their anaesthesia and surgery. The messages requested patients to complete an online Quality of Recovery survey questionnaire if they had a smartphone. The results were immediately available. A preliminary survey of consenting patients with available mobile telephone numbers in a private practice was undertaken by the author. A total of 123 procedures were eligible for follow-up and survey requests were sent to 94 patients. Sixty-five surveys were completed. This represents 69% of surveys requested, demonstrating that mobile phone technology can be used to provide significant amounts of data for quality assurance. However, the implementation of a mobile internet data collection system requires consideration of privacy principles, security and ethical handling of data.

Accounting for Uncertainty and Time Lags in Equivalency Calculations for Offsetting in Aquatic Resources Management Programs.

PubMed

Bradford, Michael J

2017-10-01

Biodiversity offset programs attempt to minimize unavoidable environmental impacts of anthropogenic activities by requiring offsetting measures in sufficient quantity to counterbalance losses due to the activity. Multipliers, or offsetting ratios, have been used to increase the amount of offsets to account for uncertainty but those ratios have generally been derived from theoretical or ad-hoc considerations. I analyzed uncertainty in the offsetting process in the context of offsetting for impacts to freshwater fisheries productivity. For aquatic habitats I demonstrate that an empirical risk-based approach for evaluating prediction uncertainty is feasible, and if data are available appropriate adjustments to offset requirements can be estimated. For two data-rich examples I estimate multipliers in the range of 1.5:1 - 2.5:1 are sufficient to account for the uncertainty in the prediction of gains and losses. For aquatic habitats adjustments for time delays in the delivery of offset benefits can also be calculated and are likely smaller than those for prediction uncertainty. However, the success of a biodiversity offsetting program will also depend on the management of the other components of risk not addressed by these adjustments.

Mutational Analysis of the Glycosylphosphatidylinositol (GPI) Anchor Pathway Demonstrates that GPI-Anchored Proteins Are Required for Cell Wall Biogenesis and Normal Hyphal Growth in Neurospora crassa

PubMed Central

Bowman, Shaun M.; Piwowar, Amy; Al Dabbous, Mash'el; Vierula, John; Free, Stephen J.

2006-01-01

Using mutational and proteomic approaches, we have demonstrated the importance of the glycosylphosphatidylinositol (GPI) anchor pathway for cell wall synthesis and integrity and for the overall morphology of the filamentous fungus Neurospora crassa. Mutants affected in the gpig-1, gpip-1, gpip-2, gpip-3, and gpit-1 genes, which encode components of the N. crassa GPI anchor biosynthetic pathway, have been characterized. GPI anchor mutants exhibit colonial morphologies, significantly reduced rates of growth, altered hyphal growth patterns, considerable cellular lysis, and an abnormal “cell-within-a-cell” phenotype. The mutants are deficient in the production of GPI-anchored proteins, verifying the requirement of each altered gene for the process of GPI-anchoring. The mutant cell walls are abnormally weak, contain reduced amounts of protein, and have an altered carbohydrate composition. The mutant cell walls lack a number of GPI-anchored proteins, putatively involved in cell wall biogenesis and remodeling. From these studies, we conclude that the GPI anchor pathway is critical for proper cell wall structure and function in N. crassa. PMID:16524913

SAGE III on ISS Lessons Learned on Thermal Interface Design

NASA Technical Reports Server (NTRS)

Davis, Warren

2015-01-01

The Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument - the fifth in a series of instruments developed for monitoring vertical distribution of aerosols, ozone, and other trace gases in the Earth's stratosphere and troposphere - is currently scheduled for delivery to the International Space Station (ISS) via the SpaceX Dragon vehicle in 2016. The Instrument Adapter Module (IAM), one of many SAGE III subsystems, continuously dissipates a considerable amount of thermal energy during mission operations. Although a portion of this energy is transferred via its large radiator surface area, the majority must be conductively transferred to the ExPRESS Payload Adapter (ExPA) to satisfy thermal mitigation requirements. The baseline IAM-ExPA mechanical interface did not afford the thermal conductance necessary to prevent the IAM from overheating in hot on-orbit cases, and high interfacial conductance was difficult to achieve given the large span between mechanical fasteners, less than stringent flatness specifications, and material usage constraints due to strict contamination requirements. This paper will examine the evolution of the IAM-ExPA thermal interface over the course of three design iterations and will include discussion on design challenges, material selection, testing successes and failures, and lessons learned.

The value of snow cover

NASA Astrophysics Data System (ADS)

Sokratov, S. A.

2009-04-01

Snow is the natural resource, like soil and water. It has specific properties which allow its use not just for skiing but also for houses cooling in summer (Swedish experience), for air fields construction (Arctic and Antarctic), for dams (north of Russia), for buildings (not only snow-houses of some Polar peoples but artistic hotel attracting tourists in Sweden), and as art material (Sapporo snow festival, Finnish events), etc. "Adjustment" of snow distribution and amount is not only rather common practice (avalanche-protection constructions keeping snow on slopes) but also the practice with long history. So-called "snow irrigation" was used in Russia since XIX century to protect winter crop. What is now named "artificial snow production", is part of much larger pattern. What makes it special—it is unavoidable in present climate and economy situation. 5% of national income in Austria is winter tourism. 50% of the economy in Savoy relay on winter tourism. In terms of money this can be less, but in terms of jobs and income involved this would be even more considerable in Switzerland. As an example—the population of Davos is 14000 in Summer and 50000 in Winter. Skiing is growing business. In present time you can find ski slopes in Turkey and Lebanon. To keep a cite suitable for attracting tourists you need certain amount of sunny days and certain amount of snow. The snow cannons are often the only way to keep a place running. On the other hand, more artificial snow does not necessary attract more tourists, while heavy natural snowfall does attract them. Artificial snow making is costly and requires infrastructure (ponds and electric lines) with very narrow range of weather conditions. Related companies are searching for alternatives and one of them can be "weather regulation" by distribution of some chemical components in clouds. It did not happen yet, but can happen soon. The consequences of such interference in Nature is hardly known. The ski tourism is not the only and not even the main outcome from snow cover use. The value of snow cover for agriculture, water resources, industry and transportation is so naturally inside the activities that is not often quantified. However, any considerations of adaptation strategies for climate change with changing snow conditions need such quantification.

Robotics in a controlled, ecological life support system

NASA Technical Reports Server (NTRS)

Miles, Gaines E.; Krom, Kimberly J.

1993-01-01

Controlled, Ecological Life Support Systems (CELSS) that utilize plants to provide food, water and oxygen could consume considerable amounts of labor unless crop production, recovery and processing are automated. Robotic manipulators equipped with special end-effectors and programmed to perform the sensing and materials handling tasks would minimize the amount of astronaut labor required. The Human Rated Test Facility (HRTF) planned for Johnson Space Center could discover and demonstrate techniques of crop production which can be reliably integrated with machinery to minimize labor requirements. Before the physical components (shelves, lighting fixtures, etc.) can be selected, a systems analysis must be performed to determine which alternative processes should be followed and how the materials handling tasks should be automated. Given that the current procedures used to grow crops in a CELSS may not be the best methods to automate, then what are the alternatives? How may plants be grown, harvested, processed for food, and the inedible components recycled? What commercial technologies current exist? What research efforts are underway to develop new technologies which might satisfy the need for automation in a CELSS? The answers to these questions should prove enlightening and provide some of the information necessary to perform the systems analysis. The planting, culturing, gathering, threshing and separation, food processing, and recovery of inedible portions of wheat were studied. The basic biological and materials handling processes of each task are defined and discussed. Current practices at Johnson Space Center and other NASA centers are described and compared to common production practices in the plant production industry. Technologies currently being researched which might be applicable are identified and illustrated. Finally, based on this knowledge, several scenarios are proposed for automating the tasks for wheat.

Natural-gas hydrates: Resource of the twenty-first century?

USGS Publications Warehouse

Collett, T.S.

2001-01-01

Although considerable uncertainty and disagreement prevail concerning the world's gas-hydrate resources, the estimated amount of gas in those gas-hydrate accumulations greatly exceeds the volume of known conventional gas reserves. However, the role that gas hydrates will play in contributing to the world's energy requirements will ultimately depend less on the volume of gas-hydrate resources than on the cost to extract them. Gas hydrates occur in sedimentary deposits under conditions of pressure and temperature present in permafrost regions and beneath the sea in outer continental margins. The combined information from arctic gas-hydrate studies shows that in permafrost regions, gas hydrates may exist at subsurface depths ranging from about 130 m to 2000 m. The presence of gas hydrates in offshore continental margins has been inferred mainly from anomalous seismic reflectors (known as bottom-simulating reflectors) that have been mapped at depths below the seafloor ranging from approximately 100 m to 1100 m. Current estimates of the amount of gas in the world's marine and permafrost gas-hydrate accumulations are in rough accord at about 20,000 trillion m3. Gas hydrate as an energy commodity is often grouped with other unconventional hydrocarbon resources. In most cases, the evolution of a nonproducible unconventional resource to a producible energy resource has relied on significant capital investment and technology development. To evaluate the energy-resource potential of gas hydrates will also require the support of sustained research and development programs. Despite the fact that relatively little is known about the ultimate resource potential of gas hydrates, it is certain that they are a vast storehouse of natural gas, and significant technical challenges will need to be met before this enormous resource can be considered an economically producible reserve.

32 CFR Enclosure 1 - Requirements for Environmental Considerations-Global Commons

Code of Federal Regulations, 2010 CFR

2010-07-01

... the responsible decision-making official to be informed of pertinent environmental considerations. The... making an appropriate record with respect to this requirement is for the decision-maker to sign and date...-making process. Other means of making an appropriate record are also acceptable. 9. Timing. No decision...

33 CFR 230.17 - Filing requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... supplement, district commanders will establish a time schedule for each step of the process based upon considerations listed in 40 CFR 1501.8 and upon other management considerations. The time required from the... reviews by division and the incorporation of division's comments in the EIS. HQUSACE and/or division will...

Responding to and Supporting Students with Disabilities: Risk Management Considerations

ERIC Educational Resources Information Center

Lundquist, Anne; Shackelford, Allan

2011-01-01

Making the "right" risk management decisions involving students with significant psychological disabilities requires a clear and comprehensive understanding of the legal obligations and duties at issue. It also requires taking into consideration the best interests of these individual students. At the same time, decision makers must focus…

SIMULATING LAKE PONTCHARTRAIN AND MISSISSIPPI RIVER OUTFLOW AFTER HURRICANE KATRINA

EPA Science Inventory

Hurricane Katrina was the direct cause of the flooding of New Orleans in September 2005. Between its passage and the pumping of flood waters back into Lake Pontchartrain and the Mississippi River, the flood waters acquired considerable amounts of contaminants, notably silver, but...

Nanotechnology overview: Opportunities and challenges

USDA-ARS?s Scientific Manuscript database

Nanotechnology can be defined as the science of manipulating matter at the nanometer scale in order to discover new properties and possibly produce new products. For the past 30 years, a considerable amount of scientific interest and R&D funding devoted to nanotechnology has led to rapid developmen...

26 CFR 301.7122-1 - Compromises.

Code of Federal Regulations, 2013 CFR

2013-04-01

... when they provide for payment of compromised amounts in one or more equal or unequal installments. (4... achieved, collection of the full liability would cause the taxpayer economic hardship within the meaning of... policy or equity considerations identified by the taxpayer provide a sufficient basis for compromising...

26 CFR 301.7122-1 - Compromises.

Code of Federal Regulations, 2012 CFR

2012-04-01

... when they provide for payment of compromised amounts in one or more equal or unequal installments. (4... achieved, collection of the full liability would cause the taxpayer economic hardship within the meaning of... policy or equity considerations identified by the taxpayer provide a sufficient basis for compromising...

48 CFR 915.404-4-72 - Special considerations for cost-plus-award-fee contracts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... management and operating contracts or other contracts as determined by the Senior Procurement Executive, including those using the Construction, Construction Management, or Special Equipment Purchases/Subcontract... for construction and construction management contracts). However, the base amount should not normally...

48 CFR 915.404-4-72 - Special considerations for cost-plus-award-fee contracts.

Code of Federal Regulations, 2012 CFR

2012-10-01

... management and operating contracts or other contracts as determined by the Senior Procurement Executive, including those using the Construction, Construction Management, or Special Equipment Purchases/Subcontract... for construction and construction management contracts). However, the base amount should not normally...

48 CFR 915.404-4-72 - Special considerations for cost-plus-award-fee contracts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... management and operating contracts or other contracts as determined by the Senior Procurement Executive, including those using the Construction, Construction Management, or Special Equipment Purchases/Subcontract... for construction and construction management contracts). However, the base amount should not normally...

48 CFR 915.404-4-72 - Special considerations for cost-plus-award-fee contracts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... management and operating contracts or other contracts as determined by the Senior Procurement Executive, including those using the Construction, Construction Management, or Special Equipment Purchases/Subcontract... for construction and construction management contracts). However, the base amount should not normally...

Quality control/quality assurance testing for joint density and segregation of asphalt mixtures.

DOT National Transportation Integrated Search

2013-04-01

Longitudinal joint quality control/assurance is essential to the successful performance of asphalt pavements and it has received considerable amount of attention in recent years. The purpose of the study is to evaluate the level of compaction at the ...

23 CFR 710.703 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... amount of the toll rates, economic development impacts and considerations, or social and environmental..., construction, maintenance, operation, level of service, and/or capital improvements to a facility over the term... assistance participated in either the purchase of any real property, or in any capital expenditures in any...

The Base 32 Method: An Improved Method for Coding Sibling Constellations.

ERIC Educational Resources Information Center

Perfetti, Lawrence J. Carpenter

1990-01-01

Offers new sibling constellation coding method (Base 32) for genograms using binary and base 32 numbers that saves considerable microcomputer memory. Points out that new method will result in greater ability to store and analyze larger amounts of family data. (Author/CM)

Fatty acid profile of kenaf seed oil

USDA-ARS?s Scientific Manuscript database

The fatty acid profile of kenaf (Hibiscus cannabinus L.) seed oil has been the subject of several previous reports in the literature. These reports vary considerably regarding the presence and amounts of specific fatty acids, notably epoxyoleic acid but also cyclic (cyclopropene and cyclopropane) fa...

20 CFR 416.538 - Amount of underpayment or overpayment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... difference between the amount paid to a recipient and the amount of payment actually due such recipient for a... difference between the amount paid and the amount actually due for that month. The period ends with the month... require no change with respect to a prior determination of overpayment or to the period relating to such...

43 CFR 404.34 - Can Reclamation reduce the amount of non-Federal cost-share required for a feasibility study?

Code of Federal Regulations, 2010 CFR

2010-10-01

... Regulations Relating to Public Lands BUREAU OF RECLAMATION, DEPARTMENT OF THE INTERIOR RECLAMATION RURAL WATER SUPPLY PROGRAM Cost-Sharing § 404.34 Can Reclamation reduce the amount of non-Federal cost-share required...

Advanced extravehicular activity systems requirements definition study. Phase 2: Extravehicular activity at a lunar base

NASA Technical Reports Server (NTRS)

Neal, Valerie; Shields, Nicholas, Jr.; Carr, Gerald P.; Pogue, William; Schmitt, Harrison H.; Schulze, Arthur E.

1988-01-01

The focus is on Extravehicular Activity (EVA) systems requirements definition for an advanced space mission: remote-from-main base EVA on the Moon. The lunar environment, biomedical considerations, appropriate hardware design criteria, hardware and interface requirements, and key technical issues for advanced lunar EVA were examined. Six remote EVA scenarios (three nominal operations and three contingency situations) were developed in considerable detail.

Theoretical considerations for Reaction-Formed Silicon Carbide (RFSC) formation by molten silicon infiltration into slurry-derived preforms

NASA Technical Reports Server (NTRS)

Behrendt, D. R.; Singh, M.

1993-01-01

For reaction-formed silicon carbide (RFSC) ceramics produced by silicon melt infiltration of porous carbon preforms, equations are developed to relate the amount of residual silicon to the initial carbon density. Also, for a slurry derived preform containing both carbon and silicon powder, equations are derived which relate the amount of residual silicon in the RFSC to the relative density of the carbon in the preform and to the amount of silicon powder added to the slurry. For a porous carbon preform that does not have enough porosity to prevent choking-off of the silicon infiltration, these results show that complete silicon infiltration can occur by adding silicon powder to the slurry mixture used to produce these preforms.

Wireless Sensor Node Power Profiling Based on IEEE 802.11 and IEEE 802.15.4 Communication Protocols. Modeling and Simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agarwal, Vivek; Richardson, Joseph; Zhang, Yanliang

Most wireless sensor network (comprising of thousands of WSNs) applications require operation over extended periods of time beginning with their deployment. Network lifetime is extremely critical for most applications and is one of the limiting factors for energy-constrained networks. Based on applications, there are wide ranges of different energy sources suitable for powering WSNs. A battery is traditionally used to power WSNs. The deployed WSN is required to last for long time. Due to finite amount of energy present in batteries, it is not feasible to replace batteries. Recently there has been a new surge in the area of energymore » harvesting were ambient energy in the environment can be utilized to prolong the lifetime of WSNs. Some of the sources of ambient energies are solar power, thermal gradient, human motion and body heat, vibrations, and ambient RF energy. The design and development of TEGs to power WSNs that would remain active for a long period of time requires comprehensive understanding of WSN operational. This motivates the research in modeling the lifetime, i.e., power consumption, of a WSN by taking into consideration various node and network level activities. A WSN must perform three essential tasks: sense events, perform quick local information processing of sensed events, and wirelessly exchange locally processed data with the base station or with other WSNs in the network. Each task has a power cost per unit tine and an additional cost when switching between tasks. There are number of other considerations that must also be taken into account when computing the power consumption associated with each task. The considerations includes: number of events occurring in a fixed active time period and the duration of each event, event-information processing time, total communication time, number of retransmission, etc. Additionally, at the network level the communication of information data packets between WSNs involves collisions, latency, and retransmission, which result in unanticipated power losses. This report focuses rigorous stochastic modeling of power demand for a schedule-driven WSN utilizing Institute of Electrical and Electronics Engineers 802.11 and 802.15.4 communication protocols. The model captures the generic operation of a schedule-driven WSN when an external event occurs, i.e., sensing, following by processing, and followed by communication. The report will present development of an expression to compute the expected energy consumption per operational cycle of a schedule-driven WSN by taking into consideration the node level activities, i.e., sensing and processing, and the network level activities, i.e., channel access, packet collision, retransmission attempts, and transmission of a data packet.« less

Operational Issues: What Science in Available?

NASA Technical Reports Server (NTRS)

Rosekind, Mark R.; Neri, David F.

1997-01-01

Flight/duty/rest considerations involve two highly complex factors: the diverse demands of aviation operations and human physiology (especially sleep and circadian rhythms). Several core operational issues related to fatigue have been identified, such as minimum rest requirements, duty length, flight time considerations, crossing multiple time zones, and night flying. Operations also can involve on-call reserve status and callout, delays due to unforeseen circumstances (e.g., weather, mechanical), and on-demand flights. Over 40 years of scientific research is now available to apply to these complex issues of flight/duty/rest requirements. This research involves controlled 'laboratory studies, simulations, and data collected during regular flight operations. When flight/duty/rest requirements are determined they are typically based on a variety of considerations, such as operational demand, safety, economic, etc. Rarely has the available, state-of-the-art science been a consideration along with these other factors when determining flight/duty/rest requirements. While the complexity of the operational demand and human physiology precludes an absolute solution, there is an opportunity to take full advantage of the current scientific data. Incorporating these data in a rational operational manner into flight/duty/rest requirements can improve flight crew performance, alertness, and ultimately, aviation safety.

The Influence Of Highway Transportation Infrastructure Condition Toward Commodity Production Generation for The Resilience Needs at Regional Internal Zone

NASA Astrophysics Data System (ADS)

Akbardin, Juang; Parikesit, Danang; Riyanto, Bambang; Mulyono, Agus Taufik

2018-02-01

The poultry commodity consumption and requirement is one of the main commodities that must be fulfilled in a region to maintain the availability of meat from poultry. Poultry commodity production is one of the production sectors that have a clean environment resistance. An increasing of poultry commodity generation production requires a smooth distribution to arrive at the processing. The livestock location as a commodity production is placed at a considerable far distance from residential and market locations. Zones that have poultry commodity production have an excess potential to supply other zones that are lacking in production to the consumption of these commodities. The condition of highway transportation infrastructure that is very diverse with the damage level availability in a zone has an influence in the supply and demand of poultry commodity requirement in the regional internal of Central Java province. In order to know the effect of highway transportation infrastructure condition toward the poultry commodity movement, demography factor and availability of freight vehicles will be reviewed to estimate the amount of poultry commodity movement generation production. Thus the poultry commodity consumption requirement that located in the internal - regional zone of central java province can be adequated from the zone. So it can be minimized the negative impacts that affect the environment at the zone in terms of comparison of the movement attraction and generation production at poultry commodity in Central Java.

40 CFR 31.52 - Collection of amounts due.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 31.52 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE UNIFORM ADMINISTRATIVE REQUIREMENTS FOR GRANTS AND COOPERATIVE AGREEMENTS TO STATE AND LOCAL GOVERNMENTS After-the-Grant Requirements § 31.52 Collection of amounts due. (a) Any funds paid to a grantee in...

18 CFR 284.270 - Reporting requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Reporting requirements. 284.270 Section 284.270 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION...; (4) The estimated total amount and average daily amount of emergency natural gas to be purchased...

18 CFR 284.270 - Reporting requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Reporting requirements. 284.270 Section 284.270 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... the emergency; (4) The estimated total amount and average daily amount of emergency natural gas to be...

18 CFR 284.270 - Reporting requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Reporting requirements. 284.270 Section 284.270 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION...; (4) The estimated total amount and average daily amount of emergency natural gas to be purchased...

18 CFR 284.270 - Reporting requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Reporting requirements. 284.270 Section 284.270 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... the emergency; (4) The estimated total amount and average daily amount of emergency natural gas to be...

18 CFR 284.270 - Reporting requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Reporting requirements. 284.270 Section 284.270 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... the emergency; (4) The estimated total amount and average daily amount of emergency natural gas to be...

Solar array study for solar electric propulsion spacecraft for the Encke rendezvous mission

NASA Technical Reports Server (NTRS)

Sequeira, E. A.; Patterson, R. E.

1974-01-01

The work is described which was performed on the design, analysis and performance of a 20 kW rollup solar array capable of meeting the design requirements of a solar electric spacecraft for the 1980 Encke rendezvous mission. To meet the high power requirements of the proposed electric propulsion mission, solar arrays on the order of 186.6 sq m were defined. Because of the large weights involved with arrays of this size, consideration of array configurations is limited to lightweight, large area concepts with maximum power-to-weight ratios. Items covered include solar array requirements and constraints, array concept selection and rationale, structural and electrical design considerations, and reliability considerations.

The production of hydrogen fuel from renewable sources and its role in grid operations

NASA Astrophysics Data System (ADS)

Barton, John; Gammon, Rupert

Understanding the scale and nature of hydrogen's potential role in the development of low carbon energy systems requires an examination of the operation of the whole energy system, including heat, power, industrial and transport sectors, on an hour-by-hour basis. The Future Energy Scenario Assessment (FESA) software model used for this study is unique in providing a holistic, high resolution, functional analysis, which incorporates variations in supply resulting from weather-dependent renewable energy generators. The outputs of this model, arising from any given user-definable scenario, are year round supply and demand profiles that can be used to assess the market size and operational regime of energy technologies. FESA was used in this case to assess what - if anything - might be the role for hydrogen in a low carbon economy future for the UK. In this study, three UK energy supply pathways were considered, all of which reduce greenhouse gas emissions by 80% by 2050, and substantially reduce reliance on oil and gas while maintaining a stable electricity grid and meeting the energy needs of a modern economy. All use more nuclear power and renewable energy of all kinds than today's system. The first of these scenarios relies on substantial amounts of 'clean coal' in combination with intermittent renewable energy sources by year the 2050. The second uses twice as much intermittent renewable energy as the first and virtually no coal. The third uses 2.5 times as much nuclear power as the first and virtually no coal. All scenarios clearly indicate that the use of hydrogen in the transport sector is important in reducing distributed carbon emissions that cannot easily be mitigated by Carbon Capture and Storage (CCS). In the first scenario, this hydrogen derives mainly from steam reformation of fossil fuels (principally coal), whereas in the second and third scenarios, hydrogen is made mainly by electrolysis using variable surpluses of low-carbon electricity. Hydrogen thereby fulfils a double facetted role of Demand Side Management (DSM) for the electricity grid and the provision of a 'clean' fuel, predominantly for the transport sector. When each of the scenarios was examined without the use of hydrogen as a transport fuel, substantially larger amounts of primary energy were required in the form of imported coal. The FESA model also indicates that the challenge of grid balancing is not a valid reason for limiting the amount of intermittent renewable energy generated. Engineering limitations, economic viability, local environmental considerations and conflicting uses of land and sea may limit the amount of renewable energy available, but there is no practical limit to the conversion of this energy into whatever is required, be it electricity, heat, motive power or chemical feedstocks.

27 CFR 44.123 - Amount of bond.

Code of Federal Regulations, 2011 CFR

2011-04-01

... bond: Provided, That the amount of any such bond (or the total amount where original and strengthening... received into the warehouse until a strengthening or superseding bond is filed, as required by § 44.124 or...

27 CFR 44.123 - Amount of bond.

Code of Federal Regulations, 2010 CFR

2010-04-01

... bond: Provided, That the amount of any such bond (or the total amount where original and strengthening... received into the warehouse until a strengthening or superseding bond is filed, as required by § 44.124 or...

Phytoavailability and extractability of potassium, magnesium and manganese in calcareous soil amended with olive oil wastewater.

PubMed

Gallardo-Lara, F; Azcón, M; Polo, A

2000-09-01

Land disposal of olive oil wastewater using it as a soil amendment requires a knowledge of the effects that its application may produce on the status of the mineral nutrients in the plant-soil system. A pot experiment using calcareous soil was performed in a growth chamber to examine the effects of olive oil wastewater on the availability and postharvest soil extractability of K, Mg and Mn. The experiment included 6 treatments: two rates of olive oil wastewater, two mineral fertilizer treatments containing K (which supplied K in amounts equivalent to the K supplied by the olive oil wastewater treatments), a K-free mineral fertilizer treatment, and a control. The pots were sown with ryegrass as the test plant, harvesting 3 times at intervals of one month. Olive oil wastewater has demonstrated a considerable capacity for supplying K that can be assimilated by the plant, tending in fact to surpass the mineral potassium fertilizer tested. The application of olive oil wastewater tends to reduce the concentration of Mg in the plant, similarly to the effect of adding mineral potassium fertilizer. An enhancement of Mn availability takes place in the soil amended with olive oil wastewater, which on occasion has produced Mn concentrations in plant that could be considered phytotoxic or at least excessive. After harvesting, we observed an increase in the amount of exchangeable K in soil with added industrial wastewater. However, these increases are lower than those in soil treated with mineral potassium fertilizer. The levels of exchangeable, carbonate-bound, organic-bound and residual Mg in soil were higher in treatments incorporating olive oil wastewater than in those with added mineral K, with the opposite tendency occurring in the amount of Fe-Mn oxides-bound Mg in soil. Treatments based on olive oil wastewater, especially in high doses, increased the amount of exchangeable and carbonate-bound Mn in soil, in comparison with treatments adding mineral fertilizers with or without K. In contrast, the addition of industrial wastewater caused a drop in the amount of Fe-Mn oxides-bound and organic-bound Mn in soil.

Plasmids containing small subunit ribosomal RNA gene fragments from Babesia bovis and Babesia bigemina

USDA-ARS?s Scientific Manuscript database

BEI Resources was developed by NIAID as a centralized biological resource center for research reagents to the scientific community (http://www.beiresources.org/). They have a considerable amount of reagents and isolates for parasitologists working with Entamoeba histolytica, Giardia, Toxoplasma, and...

Characterization of calcium oxalate defective (cod) 3 mutant from Medicago truncatula

USDA-ARS?s Scientific Manuscript database

Many plants invest a considerable amount of resources and energy into the formation of calcium oxalate crystals. Assigned roles for plant crystal formation include functions in defense, calcium regulation, and aluminum tolerance. From a human health standpoint, oxalate present in edible plant tiss...

CURRENT AND EMERGING TECHNOLOGIES FOR EXTENDING THE LIFETIME OF ELECTROLESS NICKEL PLATING BATHS

EPA Science Inventory

The waste treatment and rejuvenation of spent electroless nickel baths has attracted a considerable amount of interest from electroplating shops, electroless nickel suppliers, universities and regulatory agencies due to the finite life of the baths and the associated waste that t...

Dreams Memories & Photography

ERIC Educational Resources Information Center

Young, Bernard

2012-01-01

Photography students spend a considerable amount of time working on technical issues in shooting, composing, editing, and processing prints. Another aspect of their learning should include the conception and communication of their ideas. A student's memories and dreams can serve as motivation to create images in visual art. Some artists claim that…

COMPUTER PROGRAM FOR THE NRL SATELLITE POSITION DISPLAY,

DTIC Science & Technology

NRL Satellite position Prediction And Display ( SPAD ), provides a considerable amount of display control versatility. Up to eleven satellites can be...expanded mode. A commercial equivalent of the AN/UYK-1 computer was used in the research version of SPAD . Since the program was written in a

21 CFR 524.1193 - Ivermectin topical solution.

Code of Federal Regulations, 2014 CFR

2014-04-01

... not use in female dairy cattle of breeding age. A withdrawal period has not been established for this.... (d) Special considerations. See § 500.25 of this chapter. (e) Conditions of use in cattle—(1) Amount... larvae) Dictyocaulus viviparus; cattle grubs (parasitic stages) Hypoderma bovis, H. lineatum; mites...

21 CFR 524.1193 - Ivermectin topical solution.

Code of Federal Regulations, 2012 CFR

2012-04-01

... not use in female dairy cattle of breeding age. A withdrawal period has not been established for this.... (d) Special considerations. See § 500.25 of this chapter. (e) Conditions of use in cattle—(1) Amount... larvae) Dictyocaulus viviparus; cattle grubs (parasitic stages) Hypoderma bovis, H. lineatum; mites...

21 CFR 524.1193 - Ivermectin topical solution.

Code of Federal Regulations, 2013 CFR

2013-04-01

... not use in female dairy cattle of breeding age. A withdrawal period has not been established for this.... (d) Special considerations. See § 500.25 of this chapter. (e) Conditions of use in cattle—(1) Amount... larvae) Dictyocaulus viviparus; cattle grubs (parasitic stages) Hypoderma bovis, H. lineatum; mites...

21 CFR 524.1193 - Ivermectin topical solution.

Code of Federal Regulations, 2011 CFR

2011-04-01

... not use in female dairy cattle of breeding age. A withdrawal period has not been established for this.... (d) Special considerations. See § 500.25 of this chapter. (e) Conditions of use in cattle—(1) Amount... larvae) Dictyocaulus viviparus; cattle grubs (parasitic stages) Hypoderma bovis, H. lineatum; mites...

The Evolving Transfer Mission and Student Mobility

ERIC Educational Resources Information Center

Baldwin, Christopher A.

2017-01-01

This chapter explores the changing nature of how students experience postsecondary education that results in a considerable amount of "swirl" between institutions. Although the traditional notion of "vertical" transfer from a community college to a university continues to be an important aspect of the community college mission,…

47 CFR 73.3561 - Staff consideration of applications requiring Commission action.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false Staff consideration of applications requiring...) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Rules Applicable to All Broadcast Stations § 73.3561 Staff... is reviewed by the staff and, except where the application is acted upon by the staff pursuant to...

47 CFR 73.3561 - Staff consideration of applications requiring Commission action.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false Staff consideration of applications requiring...) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Rules Applicable to All Broadcast Stations § 73.3561 Staff... is reviewed by the staff and, except where the application is acted upon by the staff pursuant to...

47 CFR 73.3561 - Staff consideration of applications requiring Commission action.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Staff consideration of applications requiring...) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Rules Applicable to All Broadcast Stations § 73.3561 Staff... is reviewed by the staff and, except where the application is acted upon by the staff pursuant to...

Irrigation Requirement Estimation Using Vegetation Indices and Inverse Biophysical Modeling

NASA Technical Reports Server (NTRS)

Bounoua, Lahouari; Imhoff, Marc L.; Franks, Shannon

2010-01-01

We explore an inverse biophysical modeling process forced by satellite and climatological data to quantify irrigation requirements in semi-arid agricultural areas. We constrain the carbon and water cycles modeled under both equilibrium, balance between vegetation and climate, and non-equilibrium, water added through irrigation. We postulate that the degree to which irrigated dry lands vary from equilibrium climate conditions is related to the amount of irrigation. The amount of water required over and above precipitation is considered as an irrigation requirement. For July, results show that spray irrigation resulted in an additional amount of water of 1.3 mm per occurrence with a frequency of 24.6 hours. In contrast, the drip irrigation required only 0.6 mm every 45.6 hours or 46% of that simulated by the spray irrigation. The modeled estimates account for 87% of the total reported irrigation water use, when soil salinity is not important and 66% in saline lands.

46 CFR 76.15-5 - Quantity, pipe sizes, and discharge rate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... PROTECTION EQUIPMENT Carbon Dioxide Extinguishing Systems, Details § 76.15-5 Quantity, pipe sizes, and discharge rate. (a) General. The amount of carbon dioxide required for each space shall be as determined by... the purpose of determining the amount of carbon dioxide required, a cargo compartment will be...

46 CFR 76.15-5 - Quantity, pipe sizes, and discharge rate.

Code of Federal Regulations, 2012 CFR

2012-10-01

... PROTECTION EQUIPMENT Carbon Dioxide Extinguishing Systems, Details § 76.15-5 Quantity, pipe sizes, and discharge rate. (a) General. The amount of carbon dioxide required for each space shall be as determined by... the purpose of determining the amount of carbon dioxide required, a cargo compartment will be...

46 CFR 76.15-5 - Quantity, pipe sizes, and discharge rate.

Code of Federal Regulations, 2014 CFR

2014-10-01

... PROTECTION EQUIPMENT Carbon Dioxide Extinguishing Systems, Details § 76.15-5 Quantity, pipe sizes, and discharge rate. (a) General. The amount of carbon dioxide required for each space shall be as determined by... the purpose of determining the amount of carbon dioxide required, a cargo compartment will be...

46 CFR 76.15-5 - Quantity, pipe sizes, and discharge rate.

Code of Federal Regulations, 2013 CFR

2013-10-01

... PROTECTION EQUIPMENT Carbon Dioxide Extinguishing Systems, Details § 76.15-5 Quantity, pipe sizes, and discharge rate. (a) General. The amount of carbon dioxide required for each space shall be as determined by... the purpose of determining the amount of carbon dioxide required, a cargo compartment will be...

24 CFR 242.23 - Maximum mortgage amounts and cash equity requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Maximum mortgage amounts and cash equity requirements. 242.23 Section 242.23 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR HOUSING-FEDERAL HOUSING...

34 CFR Appendix C to Part 379 - Calculating Required Matching Amount

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Calculating Required Matching Amount C Appendix C to Part 379 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION PROJECTS WITH INDUSTRY Pt. 379, App...

Neonatology/Paediatrics – Guidelines on Parenteral Nutrition, Chapter 13

PubMed Central

Fusch, C.; Bauer, K.; Böhles, H. J.; Jochum, F.; Koletzko, B.; Krawinkel, M.; Krohn, K.; Mühlebach, S.

2009-01-01

There are special challenges in implementing parenteral nutrition (PN) in paediatric patients, which arises from the wide range of patients, ranging from extremely premature infants up to teenagers weighing up to and over 100 kg, and their varying substrate requirements. Age and maturity-related changes of the metabolism and fluid and nutrient requirements must be taken into consideration along with the clinical situation during which PN is applied. The indication, the procedure as well as the intake of fluid and substrates are very different to that known in PN-practice in adult patients, e.g. the fluid, nutrient and energy needs of premature infants and newborns per kg body weight are markedly higher than of older paediatric and adult patients. Premature infants <35 weeks of pregnancy and most sick term infants usually require full or partial PN. In neonates the actual amount of PN administered must be calculated (not estimated). Enteral nutrition should be gradually introduced and should replace PN as quickly as possible in order to minimise any side-effects from exposure to PN. Inadequate substrate intake in early infancy can cause long-term detrimental effects in terms of metabolic programming of the risk of illness in later life. If energy and nutrient demands in children and adolescents cannot be met through enteral nutrition, partial or total PN should be considered within 7 days or less depending on the nutritional state and clinical conditions. PMID:20049070

Energetics and environmental costs of agriculture in a dry tropical region of India

NASA Astrophysics Data System (ADS)

Singh, V. P.; Singh, J. S.

1992-07-01

The present article, based on a study of five village ecosystems, assesses the energy efficiency of rain-fed agriculture in a dry tropical environment and the impact of agricultural activity on the surrounding natural ecosystems. Agronomic yield is insufficient to meet the food requirement of the human population, hence 11.5%-49.7% of the required amount of food grains are imported from the market. Energy requirements of five studied agroecosystems are subsidized considerably by the surrounding forest in the form of fodder and firewood. Natural ecosystems supply about 80%-95% of fodder needs and 81%-100% of fuelwood needs. The output-input ratio of agriculture indicated that, on average, 4.1 units of energy are expended to obtain one unit of agronomic energy. Of this, 3.9 units are supplied by the natural ecosystem. In addition, 38% of the extracted firewood is marketed. The illegal felling and lopping of trees result in ever-increasing concentric circles of forest destruction around the villages and together with excessive grazing results in savannization. The forests can be conserved by encouraging fuelwood plantations (0.7 ha/ha cultivated land) and developing village pastures (1.6 ha/ha cultivated land) and reducing the livestock numbers. Agricultural production in the region can be stabilized by introducing improved dry farming techniques such as intercropping, planned rainwater management, and adequate use of fertilizers.

Peritoneal metastases of colorectal origin - cytoreductive surgery and hyperthermic intraperitoneal chemotherapy (HIPEC). The financial aspect.

PubMed

Jastrzębski, Tomasz; Bębenek, Marek

2017-12-30

The incidence of peritoneal carcinomatosis of colorectal cancer amounts to 5%-15% for synchronous metastases and as much as 40% in cases of local recurrence. Best results are obtained for cytoreductive surgery combined with hyperthermic intraperitoneal chemotherapy (HIPEC). This treatment offers much better outcomes, leading to 5-year survival rates of as much as 30%-50%. The procedures require significant experience in abdominal surgery, are time-consuming (mean duration of the procedure ranging from 6 to 8 hours) and are burdened by complications that are due not only to the procedure itself but also to the intraperitoneal administration of the cytostatic drug at elevated temperature (41.5 °C). After the procedure, patients are required to be admitted to intensive care units due to potential complications associated with the extent and duration of the procedure as well as chemotherapy administered in hyperthermia. Postoperative management of these patients requires appropriate experience of the entire medical and nursing team. Cytoreductive surgeries combined with HIPEC as highly specialized medical procedures should be assessed for their potential long-term benefits and their costs should be appropriately calculated with consideration to realistic reimbursement rates. Realistic valuation and reimbursement covering the overall average cost of the procedure is recommended by the National Consultant in Surgical Oncology as well as the ESMO consensus guidelines.

Trends in access of plant biodiversity data revealed by Google Analytics

PubMed Central

Baxter, David G.; Hagedorn, Gregor; Legler, Ben; Gilbert, Edward; Thiele, Kevin; Vargas-Rodriguez, Yalma; Urbatsch, Lowell E.

2014-01-01

Abstract The amount of plant biodiversity data available via the web has exploded in the last decade, but making these data available requires a considerable investment of time and work, both vital considerations for organizations and institutions looking to validate the impact factors of these online works. Here we used Google Analytics (GA), to measure the value of this digital presence. In this paper we examine usage trends using 15 different GA accounts, spread across 451 institutions or botanical projects that comprise over five percent of the world's herbaria. They were studied at both one year and total years. User data from the sample reveal: 1) over 17 million web sessions, 2) on five primary operating systems, 3) search and direct traffic dominates with minimal impact from social media, 4) mobile and new device types have doubled each year for the past three years, 5) and web browsers, the tools we use to interact with the web, are changing. Server-side analytics differ from site to site making the comparison of their data sets difficult. However, use of Google Analytics erases the reporting heterogeneity of unique server-side analytics, as they can now be examined with a standard that provides a clarity for data-driven decisions. The knowledge gained here empowers any collection-based environment regardless of size, with metrics about usability, design, and possible directions for future development. PMID:25425933

Evidence-Based Design of Fixed-Dose Combinations: Principles and Application to Pediatric Anti-Tuberculosis Therapy.

PubMed

Svensson, Elin M; Yngman, Gunnar; Denti, Paolo; McIlleron, Helen; Kjellsson, Maria C; Karlsson, Mats O

2018-05-01

Fixed-dose combination formulations where several drugs are included in one tablet are important for the implementation of many long-term multidrug therapies. The selection of optimal dose ratios and tablet content of a fixed-dose combination and the design of individualized dosing regimens is a complex task, requiring multiple simultaneous considerations. In this work, a methodology for the rational design of a fixed-dose combination was developed and applied to the case of a three-drug pediatric anti-tuberculosis formulation individualized on body weight. The optimization methodology synthesizes information about the intended use population, the pharmacokinetic properties of the drugs, therapeutic targets, and practical constraints. A utility function is included to penalize deviations from the targets; a sequential estimation procedure was developed for stable estimation of break-points for individualized dosing. The suggested optimized pediatric anti-tuberculosis fixed-dose combination was compared with the recently launched World Health Organization-endorsed formulation. The optimized fixed-dose combination included 15, 36, and 16% higher amounts of rifampicin, isoniazid, and pyrazinamide, respectively. The optimized fixed-dose combination is expected to result in overall less deviation from the therapeutic targets based on adult exposure and substantially fewer children with underexposure (below half the target). The development of this design tool can aid the implementation of evidence-based formulations, integrating available knowledge and practical considerations, to optimize drug exposures and thereby treatment outcomes.

Clinical perspectives on pulmonary systemic and macromolecular delivery.

PubMed

Scheuch, Gerhard; Kohlhaeufl, Martin J; Brand, Peter; Siekmeier, Ruediger

2006-10-31

The large epithelial surface area, the high organ vascularization, the thin nature of the alveolar epithelium and the immense capacity for solute exchange are factors that led the lung to serve as an ideal administration route for the application of drugs for treatment of systemic disorders. However, the deposition behaviour of aerosol particles in the respiratory tract depends on a number of physical (e.g. properties of the particle), chemical (e.g. properties of the drug) and physiological (e.g. breathing pattern, pulmonary diseases) factors. If these are not considered, it will not be possible to deposit a reproducible and sufficient amount of drug in a predefined lung region by means of aerosol inhalation. The lack of consideration of such issues led to many problems in inhalation drug therapy for many years mainly because physiological background of aerosol inhalation was not fully understood. However, over the last 20 years, there has been considerable progress in aerosol research and in the understanding of the underlying mechanisms of particle inhalation and pulmonary particle deposition. As a consequence, an increasing number of studies have been performed for the lung administration of drugs using a variety of different inhalation techniques. This review describes the physical and in part some of the physiological requirements that need to be considered for the optimization of pulmonary drug delivery to target certain lung regions.

Trends in access of plant biodiversity data revealed by Google Analytics.

PubMed

Jones, Timothy Mark; Baxter, David G; Hagedorn, Gregor; Legler, Ben; Gilbert, Edward; Thiele, Kevin; Vargas-Rodriguez, Yalma; Urbatsch, Lowell E

2014-01-01

The amount of plant biodiversity data available via the web has exploded in the last decade, but making these data available requires a considerable investment of time and work, both vital considerations for organizations and institutions looking to validate the impact factors of these online works. Here we used Google Analytics (GA), to measure the value of this digital presence. In this paper we examine usage trends using 15 different GA accounts, spread across 451 institutions or botanical projects that comprise over five percent of the world's herbaria. They were studied at both one year and total years. User data from the sample reveal: 1) over 17 million web sessions, 2) on five primary operating systems, 3) search and direct traffic dominates with minimal impact from social media, 4) mobile and new device types have doubled each year for the past three years, 5) and web browsers, the tools we use to interact with the web, are changing. Server-side analytics differ from site to site making the comparison of their data sets difficult. However, use of Google Analytics erases the reporting heterogeneity of unique server-side analytics, as they can now be examined with a standard that provides a clarity for data-driven decisions. The knowledge gained here empowers any collection-based environment regardless of size, with metrics about usability, design, and possible directions for future development.

Digital storage and analysis of color Doppler echocardiograms

NASA Technical Reports Server (NTRS)

Chandra, S.; Thomas, J. D.

1997-01-01

Color Doppler flow mapping has played an important role in clinical echocardiography. Most of the clinical work, however, has been primarily qualitative. Although qualitative information is very valuable, there is considerable quantitative information stored within the velocity map that has not been extensively exploited so far. Recently, many researchers have shown interest in using the encoded velocities to address the clinical problems such as quantification of valvular regurgitation, calculation of cardiac output, and characterization of ventricular filling. In this article, we review some basic physics and engineering aspects of color Doppler echocardiography, as well as drawbacks of trying to retrieve velocities from video tape data. Digital storage, which plays a critical role in performing quantitative analysis, is discussed in some detail with special attention to velocity encoding in DICOM 3.0 (medical image storage standard) and the use of digital compression. Lossy compression can considerably reduce file size with minimal loss of information (mostly redundant); this is critical for digital storage because of the enormous amount of data generated (a 10 minute study could require 18 Gigabytes of storage capacity). Lossy JPEG compression and its impact on quantitative analysis has been studied, showing that images compressed at 27:1 using the JPEG algorithm compares favorably with directly digitized video images, the current goldstandard. Some potential applications of these velocities in analyzing the proximal convergence zones, mitral inflow, and some areas of future development are also discussed in the article.

Sex effects on macromineral requirements for growth in Saanen goats: A meta-analysis.

PubMed

Vargas, J A C; Almeida, A K; Souza, A P; Fernandes, M H M R; Resende, K T; Teixeira, I A M A

2017-10-01

The aim of this study was to investigate the effects of sex on the net requirements of growth for Ca (NCa), P (NP), Na (NNa), K (NK), and Mg (NMg) in Saanen goats from 5 to 45 kg BW, with or without consideration of the degree of maturity. A database containing 209 individual records for Saanen goats (69 castrated males, 71 intact males, and 69 females) was generated from 6 comparative slaughter studies. Total amounts of Ca, P, Na, K, and Mg in the body were fitted to logarithmized allometric equations using empty BW (EBW) or degree of maturity (EBW/mature EBW) as regressors. The equations were fitted using a mixed model, where sex was considered a fixed effect and study was considered a random effect. Net requirements were estimated by the first derivative of the logarithmized allometric equations. Then, a Monte Carlo simulation was used to assess the uncertainty of calculated net requirement values. Without considering the degree of maturity, sex did not affect NCa, NP, and NNa ( > 0.10). Conversely, considering the degree of maturity, NCa and NP of intact males were 5% and 2%, respectively, greater than those of castrated males and females ( < 0.01), and NNa of males (castrated and intact) was 6% greater than that of females ( < 0.01). Regardless of approach used, NCa and NP remained constant, whereas NNa decreased by 32% as BW ranged from 5 to 45 kg. Without considering the degree of maturity, NMg of castrated and intact males were 8% and 18% greater than that of female goats ( = 0.054), respectively. Hereof NMg of castrated and intact males increased by 8% and 15%, respectively, whereas that of females decreased by 8% as BW ranged from 5 to 45 kg. Considering the degree of maturity, NMg of castrated and intact males were 7% and 17% greater than that of female goats ( = 0.054), respectively. In this regard, NMg of castrated and intact males increased 8% and 16%, respectively, whereas that of females decreased by 7% from 5 to 45 kg BW. Both approaches showed that, regardless of sex ( > 0.10), NK decreased by 26% (i.e., without considering the maturity degree) or 27% (i.e., considering the degree of maturity) from 5 to 45 kg BW. Therefore, the consideration of maturity stage highlights differences across sexes in the net macromineral requirements for growth in goats. Elucidation of sex effects on macromineral requirements for growth may be useful for improving the accuracy of recommendations for mineral requirements for dairy goats.

Obtaining accurate amounts of mercury from mercury compounds via electrolytic methods

DOEpatents

Grossman, Mark W.; George, William A.

1987-01-01

A process for obtaining pre-determined, accurate rate amounts of mercury. In one embodiment, predetermined, precise amounts of Hg are separated from HgO and plated onto a cathode wire. The method for doing this involves dissolving a precise amount of HgO which corresponds to a pre-determined amount of Hg desired in an electrolyte solution comprised of glacial acetic acid and H.sub.2 O. The mercuric ions are then electrolytically reduced and plated onto a cathode producing the required pre-determined quantity of Hg. In another embodiment, pre-determined, precise amounts of Hg are obtained from Hg.sub.2 Cl.sub.2. The method for doing this involves dissolving a precise amount of Hg.sub.2 Cl.sub.2 in an electrolyte solution comprised of concentrated HCl and H.sub.2 O. The mercurous ions in solution are then electrolytically reduced and plated onto a cathode wire producing the required, pre-determined quantity of Hg.

Obtaining accurate amounts of mercury from mercury compounds via electrolytic methods

DOEpatents

Grossman, M.W.; George, W.A.

1987-07-07

A process is described for obtaining pre-determined, accurate rate amounts of mercury. In one embodiment, predetermined, precise amounts of Hg are separated from HgO and plated onto a cathode wire. The method for doing this involves dissolving a precise amount of HgO which corresponds to a pre-determined amount of Hg desired in an electrolyte solution comprised of glacial acetic acid and H[sub 2]O. The mercuric ions are then electrolytically reduced and plated onto a cathode producing the required pre-determined quantity of Hg. In another embodiment, pre-determined, precise amounts of Hg are obtained from Hg[sub 2]Cl[sub 2]. The method for doing this involves dissolving a precise amount of Hg[sub 2]Cl[sub 2] in an electrolyte solution comprised of concentrated HCl and H[sub 2]O. The mercurous ions in solution are then electrolytically reduced and plated onto a cathode wire producing the required, pre-determined quantity of Hg. 1 fig.

A core handling device for the Mars Sample Return Mission

NASA Technical Reports Server (NTRS)

Gwynne, Owen

1989-01-01

A core handling device for use on Mars is being designed. To provide a context for the design study, it was assumed that a Mars Rover/Sample Return (MRSR) Mission would have the following characteristics: a year or more in length; visits by the rover to 50 or more sites; 100 or more meter-long cores being drilled by the rover; and the capability of returning about 5 kg of Mars regolith to Earth. These characteristics lead to the belief that in order to bring back a variegated set of samples that can address the range of scientific objetives for a MRSR mission to Mars there needs to be considerable analysis done on board the rover. Furthermore, the discrepancy between the amount of sample gathered and the amount to be returned suggests that there needs to be some method of choosing the optimal set of samples. This type of analysis will require pristine material-unaltered by the drilling process. Since the core drill thermally and mechanically alters the outer diameter (about 10 pct) of the core sample, this outer area cannot be used. The primary function of the core handling device is to extract subsamples from the core and to position these subsamples, and the core itself if needed, with respect to the various analytical instruments that can be used to perform these analyses.

Treatment of oral hyperpigmentation and gummy smile using lasers and role of plasma as a novel treatment technique in dentistry: An introductory review

PubMed Central

Jha, Nayansi; Ryu, Jae Jun; Wahab, Rizwan; Al-Khedhairy, Abdulaziz A.; Choi, Eun Ha; Kaushik, Nagendra Kumar

2017-01-01

Gingival hyperpigmentation and the condition known as gummy smile are very common dental cosmetic problems. Gingival hyperpigmentation arises due to the excess presence of melanin in certain regions of the gums. In the case of gummy smile, more than the required amount of gingival tissue is exposed upon smiling. An aesthetically pleasing smile should expose only a negligible amount of gingival tissue. Gummy smile and gingival hyperpigmentation can have detrimental effects on the aesthetic quality of a smile, and thereby a wide variety of treatment options must be taken into consideration depending patient outcome objectives. The use of a laser as a treatment modality is considered to be a promising option for such cases. We aim to explain the effects of using a laser on the gingiva and discuss the advantages and disadvantages of this type of treatment and the resulting alteration of the genetic composition of the gingival tissue. This article reviews the histological aspects and biological effects of a laser treatment for oral hyperpigmentation and gummy smile and analyzes the use of the laser as a modality to improve the smiles of people with hyperpigmentation and excessive gingival display. We also attempt to provide insight into the use of plasma as a novel technology for medical and dental research and its future implications with regard to, dental soft tissue procedures. PMID:28147333

Impact of RCRA (PL 94-580) on the use or disposal of solid wastes from Texas lignite-fired utility boilers: a literature survey. Final report. [Flue gas desulfurization sludges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, R.L.

A literature survey was conducted in order to determine the amount of information available to the public concerning the impact of the Resource Conservation and Recovery Act of 1976 (RCRA) on the use or disposal of solid wastes from Texas lignite-fired utility boilers. The utility power plants of ALCOA, Big Brown, Martin Lake, Monticello and San Miguel are the only facilities currently using Texas lignite as fuel. RCRA is a comprehensive federal law which provides for the management of hazardous waste from generation to ultimate disposal. Utility solid wastes such as fly ash and flue gas desulfurization (FGD) sludge aremore » currently classified as excluded wastes (wastes exempt from hazardous classification) pending further information regarding these high-volume, low risk wastes. RCRA also provides for the increased need of recovered materials in Subtitle F - Federal Procurement. The lignite deposits of Texas occur in belts that stretch diagonally across the state from Laredo to Texarkana. The sulfur content and Btu value of Texas lignite combined requires that sulfur scrubbers be installed on new power plant units. The utility solid wastes occur in large quantities and leachate from some of these wastes contained detectable amounts of chromium and selenium. However, the concentration of these elements in the leachate was not sufficient to classify any of the utility wastes in this study as hazardous per current RCRA guidelines. In general, fly ash and FGD sludge are classified as Class II wastes and disposed of in an environmentally acceptable manner. Considerable amounts of bottom ash and fly ash are utilized but, thus far, FGD sludge has been landfilled, usually in combination with fly ash.« less

48 CFR 733.103-73 - Protests excluded from consideration.

Code of Federal Regulations, 2011 CFR

2011-10-01

... consideration. 733.103-73 Section 733.103-73 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT GENERAL CONTRACTING REQUIREMENTS PROTESTS, DISPUTES, AND APPEALS Protests 733.103-73 Protests excluded from consideration. (a) Contract administration. Disputes between a contractor and USAID are...

48 CFR 733.103-73 - Protests excluded from consideration.

Code of Federal Regulations, 2010 CFR

2010-10-01

... consideration. 733.103-73 Section 733.103-73 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT GENERAL CONTRACTING REQUIREMENTS PROTESTS, DISPUTES, AND APPEALS Protests 733.103-73 Protests excluded from consideration. (a) Contract administration. Disputes between a contractor and USAID are...

40 CFR 194.51 - Consideration of protected individual.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Consideration of protected individual. 194.51 Section 194.51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION... Individual and Ground-Water Protection Requirements § 194.51 Consideration of protected individual...

40 CFR 194.51 - Consideration of protected individual.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Consideration of protected individual. 194.51 Section 194.51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION... Individual and Ground-Water Protection Requirements § 194.51 Consideration of protected individual...

40 CFR 194.51 - Consideration of protected individual.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Consideration of protected individual. 194.51 Section 194.51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION... Individual and Ground-Water Protection Requirements § 194.51 Consideration of protected individual...

40 CFR 194.51 - Consideration of protected individual.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Consideration of protected individual. 194.51 Section 194.51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION... Individual and Ground-Water Protection Requirements § 194.51 Consideration of protected individual...

29 CFR 4.142 - Contracts in an indefinite amount.

Code of Federal Regulations, 2010 CFR

2010-07-01

... McNamara-O'Hara Service Contract Act Determining Amount of Contract § 4.142 Contracts in an indefinite amount. (a) Every contract subject to this Act which is indefinite in amount is required to contain the....), a case arising under the Walsh-Healey Public Contracts Act. Such a contract, which may be in the...