32 CFR 989.4 - Initial considerations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... national security interests while at the same time considering important environmental factors. (g... Under Secretary of Defense (Environmental Security). This coordination requirement does not apply to...

Considerations in development of expert systems for real-time space applications

NASA Technical Reports Server (NTRS)

Murugesan, S.

1988-01-01

Over the years, demand on space systems has increased tremendously and this trend will continue for the near future. Enhanced capabilities of space systems, however, can only be met with increased complexity and sophistication of onboard and ground systems. Artificial Intelligence and expert system techniques have great potential in space applications. Expert systems could facilitate autonomous decision making, improve in-orbit fault diagnosis and repair, enhance performance and reduce reliance on ground support. However, real-time expert systems, unlike conventional off-line consultative systems, have to satisfy certain special stringent requirements before they could be used for onboard space applications. Challenging and interesting new environments are faced while developing expert system space applications. This paper discusses the special characteristics, requirements and typical life cycle issues for onboard expert systems. Further, it also describes considerations in design, development, and implementation which are particularly important to real-time expert systems for space applications.

Multi-trip vehicle routing and scheduling problem with time window in real life

NASA Astrophysics Data System (ADS)

Sze, San-Nah; Chiew, Kang-Leng; Sze, Jeeu-Fong

2012-09-01

This paper studies a manpower scheduling problem with multiple maintenance operations and vehicle routing considerations. Service teams located at a common service centre are required to travel to different customer sites. All customers must be served within given time window, which are known in advance. The scheduling process must take into consideration complex constraints such as a meal break during the team's shift, multiple travelling trips, synchronisation of service teams and working shifts. The main objective of this study is to develop a heuristic that can generate high quality solution in short time for large problem instances. A Two-stage Scheduling Heuristic is developed for different variants of the problem. Empirical results show that the proposed solution performs effectively and efficiently. In addition, our proposed approximation algorithm is very flexible and can be easily adapted to different scheduling environments and operational requirements.

75 FR 20627 - Biweekly Notice: Applications and Amendments to Facility Operating Licenses Involving No...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-20

... designed, on an RAS. Basis for proposed no significant hazards consideration determination: As required by...], Time Response Design Criteria for Safety- Related Operator Actions, 1984 guidance. Although the change... changes to the RAS Allowable Values and RWT minimum required level on the RWT structural design...

77 FR 74488 - Agency Information Collection Activities: Consideration of Deferred Action for Childhood Arrivals...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-14

... burden and associated response time should be directed to: DHS, USCIS, Office of Policy and Strategy... the burden in terms of time and money incurred by applicants for the following aspects of this... service. The average time required and money expended to secure secondary evidence such as an affidavit...

The dynamics of learning about a climate threshold

NASA Astrophysics Data System (ADS)

Keller, Klaus; McInerney, David

2008-02-01

Anthropogenic greenhouse gas emissions may trigger threshold responses of the climate system. One relevant example of such a potential threshold response is a shutdown of the North Atlantic meridional overturning circulation (MOC). Numerous studies have analyzed the problem of early MOC change detection (i.e., detection before the forcing has committed the system to a threshold response). Here we analyze the early MOC prediction problem. To this end, we virtually deploy an MOC observation system into a simple model that mimics potential future MOC responses and analyze the timing of confident detection and prediction. Our analysis suggests that a confident prediction of a potential threshold response can require century time scales, considerably longer that the time required for confident detection. The signal enabling early prediction of an approaching MOC threshold in our model study is associated with the rate at which the MOC intensity decreases for a given forcing. A faster MOC weakening implies a higher MOC sensitivity to forcing. An MOC sensitivity exceeding a critical level results in a threshold response. Determining whether an observed MOC trend in our model differs in a statistically significant way from an unforced scenario (the detection problem) imposes lower requirements on an observation system than the determination whether the MOC will shut down in the future (the prediction problem). As a result, the virtual observation systems designed in our model for early detection of MOC changes might well fail at the task of early and confident prediction. Transferring this conclusion to the real world requires a considerably refined MOC model, as well as a more complete consideration of relevant observational constraints.

Timing of the Medical Examination

ERIC Educational Resources Information Center

Christian, Cindy W.

2011-01-01

The medical examination of the sexually abused child may have evidentiary, medical, and therapeutic purposes, and the timing of the examination requires consideration of each of these objectives. In cases of acute sexual assault, emergent examinations may be needed to identify injury, collect forensic evidence, and provide infection and pregnancy…

Earth orbital experiment program and requirements study, volume 1, sections 1 - 6

NASA Technical Reports Server (NTRS)

1971-01-01

A reference manual for planners of manned earth-orbital research activity is presented. The manual serves as a systems approach to experiment and mission planning based on an integrated consideration of candidate research programs and the appropriate vehicle, mission, and technology development requirements. Long range goals and objectives for NASA activities during the 1970 to 1980 time period are analyzed. The useful and proper roles of manned and automated spacecraft for implementing NASA experiments are described. An integrated consideration of NASA long range goals and objectives, the system and mission requirements, and the alternative implementation plans are developed. Specific areas of investigation are: (1) manned space flight requirements, (2) space biology, (3) spaceborne astronomy, (4) space communications and navigation, (5) earth observation, (6) supporting technology development requirements, (7) data management system matrices, (8) instrumentation matrices, and (9) biotechnology laboratory experiments.

Cost Considerations in Nonlinear Finite-Element Computing

NASA Technical Reports Server (NTRS)

Utku, S.; Melosh, R. J.; Islam, M.; Salama, M.

1985-01-01

Conference paper discusses computational requirements for finiteelement analysis using quasi-linear approach to nonlinear problems. Paper evaluates computational efficiency of different computer architecturtural types in terms of relative cost and computing time.

Utilizing Response Time Distributions for Item Selection in CAT

ERIC Educational Resources Information Center

Fan, Zhewen; Wang, Chun; Chang, Hua-Hua; Douglas, Jeffrey

2012-01-01

Traditional methods for item selection in computerized adaptive testing only focus on item information without taking into consideration the time required to answer an item. As a result, some examinees may receive a set of items that take a very long time to finish, and information is not accrued as efficiently as possible. The authors propose two…

How to Tell Time by the Big Dipper

ERIC Educational Resources Information Center

Wahl, M. Stoessel

1978-01-01

Asserting that the skills required to tell time by the Big Dipper necessitate both considerable classroom preparation and outdoor practice, this article is designed to help teachers and students prepare for both. Written for students at the fourth grade level, this article includes simple instructions and illustrations. (JC)

Variation of Farmer Stock Grade Factors in Semi-Drying Trailers

USDA-ARS?s Scientific Manuscript database

Peanuts are increasingly being loaded into flat bottom semi-drying trailers in the field and transported to peanut buying points for curing, grading, and marketing. Conveyances in excess of 15 t are probed 15 times using the pneumatic sampler requiring considerable time for probing and reducing the...

15 CFR 200.110 - Priorities and time of completion.

Code of Federal Regulations, 2010 CFR

2010-01-01

... calibrations and other tests will generally be made in the order in which confirmed requests are received... considerably longer, particularly if their abnormal behavior requires reruns to check reliability. The customer...

Space Transportation System Availability Requirement and Its Influencing Attributes Relationships

NASA Technical Reports Server (NTRS)

Rhodes, Russell E.; Adams, Timothy C.; McCleskey, Carey M.

2008-01-01

It is important that engineering and management accept the need for an availability requirement that is derived with its influencing attributes. It is the intent of this paper to provide the visibility of relationships of these major attribute drivers (variables) to each other and the resultant system inherent availability. Also important to provide bounds of the variables providing engineering the insight required to control the system's engineering solution, e.g., these influencing attributes become design requirements also. These variables will drive the need to provide integration of similar discipline functions or technology selection to allow control of the total parts count. The relationship of selecting a reliability requirement will place a constraint on parts count to achieve a given availability requirement or if allowed to increase the parts count will drive the system reliability requirement higher. They also provide the understanding for the relationship of mean repair time (or mean down time) to maintainability, e.g., accessibility for repair, and both the mean time between failure, e.g., reliability of hardware and availability. The concerns and importance of achieving a strong availability requirement is driven by the need for affordability, the choice of using the two launch solution for the single space application, or the need to control the spare parts count needed to support the long stay in either orbit or on the surface of the moon. Understanding the requirements before starting the architectural design concept will avoid considerable time and money required to iterate the design to meet the redesign and assessment process required to achieve the results required of the customer's space transportation system. In fact the impact to the schedule to being able to deliver the system that meets the customer's needs, goals, and objectives may cause the customer to compromise his desired operational goal and objectives resulting in considerable increased life cycle cost of the fielded space transportation system.

Space Transportation System Availability Requirements and Its Influencing Attributes Relationships

NASA Technical Reports Server (NTRS)

Rhodes, Russell E.; Adams, Timothy C.; McCleskey, Carey M.

2008-01-01

It is important that engineering and management accept the need for an availability requirement that is derived with its influencing attributes. It is the intent of this paper to provide the visibility of relationships of these major attribute drivers (variables) to each other and the resultant system inherent availability. Also important to provide bounds of the variables providing engineering the insight required to control the system's engineering solution, e.g., these influencing attributes become design requirements also. These variables will drive the need to provide integration of similar discipline functions or technology selection to allow control of the total parts count. The relationship of selecting a reliability requirement will place a constraint on parts count to achieve a given availability requirement or if allowed to increase the parts count will drive the system reliability requirement higher. They also provide the understanding for the relationship of mean repair time (or mean down time) to maintainability, e.g., accessibility for repair, and both the mean time between failure, e.g., reliability of hardware and availability. The concerns and importance of achieving a strong availability requirement is driven by the need for affordability, the choice of using the two launch solution for the single space application, or the need to control the spare parts count needed to support the long stay in either orbit or on the surface of the moon. Understanding the requirements before starting the architectural design concept will avoid considerable time and money required to iterate the design to meet the redesign and assessment process required to achieve the results required of the customer's space transportation system. In fact the impact to the schedule to being able to deliver the system that meets the customer's needs, goals, and objectives may cause the customer to compromise his desired operational goal and objectives resulting in considerable increased life cycle cost of the fielded space transportation system.

Robotic Observatory System Design-Specification Considerations for Achieving Long-Term Sustainable Precision Performance

NASA Astrophysics Data System (ADS)

Wray, J. D.

2003-05-01

The robotic observatory telescope must point precisely on the target object, and then track autonomously to a fraction of the FWHM of the system PSF for durations of ten to twenty minutes or more. It must retain this precision while continuing to function at rates approaching thousands of observations per night for all its years of useful life. These stringent requirements raise new challenges unique to robotic telescope systems design. Critical design considerations are driven by the applicability of the above requirements to all systems of the robotic observatory, including telescope and instrument systems, telescope-dome enclosure systems, combined electrical and electronics systems, environmental (e.g. seeing) control systems and integrated computer control software systems. Traditional telescope design considerations include the effects of differential thermal strain, elastic flexure, plastic flexure and slack or backlash with respect to focal stability, optical alignment and angular pointing and tracking precision. Robotic observatory design must holistically encapsulate these traditional considerations within the overall objective of maximized long-term sustainable precision performance. This overall objective is accomplished through combining appropriate mechanical and dynamical system characteristics with a full-time real-time telescope mount model feedback computer control system. Important design considerations include: identifying and reducing quasi-zero-backlash; increasing size to increase precision; directly encoding axis shaft rotation; pointing and tracking operation via real-time feedback between precision mount model and axis mounted encoders; use of monolithic construction whenever appropriate for sustainable mechanical integrity; accelerating dome motion to eliminate repetitive shock; ducting internal telescope air to outside dome; and the principal design criteria: maximizing elastic repeatability while minimizing slack, plastic deformation and hysteresis to facilitate long-term repeatably precise pointing and tracking performance.

31 CFR 1010.430 - Nature of records and retention period.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Nature of records and retention period... Required To Be Maintained § 1010.430 Nature of records and retention period. (a) Wherever it is required... such a way as to be accessible within a reasonable period of time, taking into consideration the nature...

31 CFR 1010.430 - Nature of records and retention period.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Nature of records and retention period... Required To Be Maintained § 1010.430 Nature of records and retention period. (a) Wherever it is required... such a way as to be accessible within a reasonable period of time, taking into consideration the nature...

31 CFR 1010.430 - Nature of records and retention period.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Nature of records and retention period... Required To Be Maintained § 1010.430 Nature of records and retention period. (a) Wherever it is required... such a way as to be accessible within a reasonable period of time, taking into consideration the nature...

31 CFR 1010.430 - Nature of records and retention period.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Nature of records and retention period... Required To Be Maintained § 1010.430 Nature of records and retention period. (a) Wherever it is required... such a way as to be accessible within a reasonable period of time, taking into consideration the nature...

A distributed agent architecture for real-time knowledge-based systems: Real-time expert systems project, phase 1

NASA Technical Reports Server (NTRS)

Lee, S. Daniel

1990-01-01

We propose a distributed agent architecture (DAA) that can support a variety of paradigms based on both traditional real-time computing and artificial intelligence. DAA consists of distributed agents that are classified into two categories: reactive and cognitive. Reactive agents can be implemented directly in Ada to meet hard real-time requirements and be deployed on on-board embedded processors. A traditional real-time computing methodology under consideration is the rate monotonic theory that can guarantee schedulability based on analytical methods. AI techniques under consideration for reactive agents are approximate or anytime reasoning that can be implemented using Bayesian belief networks as in Guardian. Cognitive agents are traditional expert systems that can be implemented in ART-Ada to meet soft real-time requirements. During the initial design of cognitive agents, it is critical to consider the migration path that would allow initial deployment on ground-based workstations with eventual deployment on on-board processors. ART-Ada technology enables this migration while Lisp-based technologies make it difficult if not impossible. In addition to reactive and cognitive agents, a meta-level agent would be needed to coordinate multiple agents and to provide meta-level control.

Manned remote work station development article. Volume 2: Simulation requirements. Appendix A: Open cherry picker development test articles specification

NASA Technical Reports Server (NTRS)

1979-01-01

A manned remote work station (MRWS) mission scenario, broken down into the three time phases was selected as the basis for analysis of the MRWS flight article requirements and concepts. The mission roles for the three time phases, supporting tradeoff and evaluation studies, was used to identify key issues requiring simulation. The MRWS is discussed in terms of its capability to perform such operations as support of Spacelab experiments, servicing and repair of satellites, and construction. Future considerations for the use of the MRWS are also given.

78 FR 13370 - Agency Information Collection Activities: Consideration of Deferred Action for Childhood Arrivals...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-27

... may be submitted to: DHS, USCIS, Office of Policy and Strategy, Chief, Regulatory Coordination... estimates on the burden in terms of time and money incurred by applicants for the following aspects of this... service. The average time required and money expended to secure secondary evidence such as an affidavit...

Adjustment of relative humidity and temperature for differences in elevation.

Treesearch

Owen P. Cramer

1961-01-01

The variation of fire-weather elements in mountainous terrain is complex at any one time, and the patterns vary considerably with time. During periods of serious fire weather, this variation becomes important. Much information is obtainable by local interpretation of available forecasts and observations. Optimum use of available information requires some understanding...

Building Professional Competence by Design or Just Marking Time: Suggestions for Educational Reform in Athletic Therapy Education in Canada

ERIC Educational Resources Information Center

Lafave, Mark R.; Bergeron, Glen

2014-01-01

Context and Background: Athletic therapy postsecondary education and certification requirements in Canada have reached considerable milestones throughout their history. The most important of these accomplishments was administration of the first Canadian Athletic Therapists' Association (CATA) certification examination in 1975. At that time, there…

Time Management and Professional Identity of Students of Pedagogical Universities

ERIC Educational Resources Information Center

Lebedeva, Ekaterina V.; Shchipanova, Dina Ye.; Konovalova, Maria E.; Kutyin, Anton O.

2016-01-01

Topicality of the problem under research is stipulated by the necessity of personal characteristics consideration in the process of organization of educational and vocational activities of the future teachers in the conditions of educational medium, which sets high requirements to the students' time competence. The aim of the article is to study…

13 CFR 120.140 - What ethical requirements apply to participants?

Code of Federal Regulations, 2013 CFR

2013-01-01

... examples of such unethical behavior. A Participant may not: (a) Self-deal; (b) Have a real or apparent... consideration such factors as the magnitude, repetition, harm caused, and remoteness in time of the activity or...

13 CFR 120.140 - What ethical requirements apply to participants?

Code of Federal Regulations, 2014 CFR

2014-01-01

... examples of such unethical behavior. A Participant may not: (a) Self-deal; (b) Have a real or apparent... consideration such factors as the magnitude, repetition, harm caused, and remoteness in time of the activity or...

13 CFR 120.140 - What ethical requirements apply to participants?

Code of Federal Regulations, 2012 CFR

2012-01-01

... examples of such unethical behavior. A Participant may not: (a) Self-deal; (b) Have a real or apparent... consideration such factors as the magnitude, repetition, harm caused, and remoteness in time of the activity or...

Emergency Locator Transmitter (ELT) batteries guidance and recommendations

NASA Technical Reports Server (NTRS)

1984-01-01

Batteries for use with Emergency locator transmitters are discussed. Types of batteries, real-time activation considerations, encapsulation of cells in a battery pack, cold storage to extend shelf life, and general requirements are among the topics covered.

Applying next-generation DNA sequencing technology to aquatic bioassessment

EPA Science Inventory

The growing challenges for environmental monitoring and assessment have pushed standard techniques to the limits of their application. Current biological monitoring programs often require considerable time and workload to provide environmental condition assessments. New molecular...

Some significant considerations in the planning of sortie missions. [of space transportation system

NASA Technical Reports Server (NTRS)

Loftus, J. P., Jr.; Cour-Palais, B. G.; Moore, J. W.; Lohman, R. L.

1980-01-01

Opportunities and limitations to be considered in the planning of Space Shuttle/Spacelab sortie missions are discussed. As shown by a simple model of the flow of STS equipment through ground processing and flights under ideal conditions, mission duration is constrained by Orbiter availability, which is determined initially by the Orbiter production schedule and the turnaround time required between missions, and by the usage rate and quantity limitations of mission consumables. Additional considerations affecting mission duration include reductions in crew productivity upon increased mission duration and crew size, spacecraft and experiment degradation, equipment and processing facility cost effectiveness, and requirements for a power extension package, which considerations imply that increased allowable landing weight would make co-manifesting (the combination of Spacelab and deliverable payload missions) more attractive. Advantages related to payload recoverability, human presence, ease of access and the availability of different orbits are also pointed out.

Solar Design Workbook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franta, G.; Baylin, F.; Crowther, R.

1981-06-01

This Solar Design Workbook presents solar building design applications for commercial buildir^s. The book is divided into four sections. The first section describes the variety of solar applications in buildings including conservation aspects, solar fundamentals, passive systems, active systems, daylighting, and other solar options. Solar system design evaluation techniques including considerations for building energy requirements, passive systems, active systems, and economics are presented in Section II. The third section attempts to assist the designer in the building design process for energy conservation and solar applications including options and considerations for pre-design, design, and post-design phases. The information required for themore » solar design proee^ has not been fully developed at this time. Therefore, Section III is incomplete, but an overview of the considerations with some of the design proces elements is presented. Section IV illustrates ease studies that utilize solar applications in the building design.« less

Lessons Learned From an Epidemiologist-Led Countywide Community Assessment for Public Health Emergency Response (CASPER) in Oregon.

PubMed

Repp, Kimberly K; Hawes, Eva; Rees, Kathleen J; Vorderstrasse, Beth; Mohnkern, Sue

2018-06-07

Conducting a large-scale Community Assessment for Public Health Emergency Response (CASPER) in a geographically and linguistically diverse county presents significant methodological challenges that require advance planning. The Centers for Disease Control and Prevention (CDC) has adapted methodology and provided a toolkit for a rapid needs assessment after a disaster. The assessment provides representative data of the sampling frame to help guide effective distribution of resources. This article describes methodological considerations and lessons learned from a CASPER exercise conducted by Washington County Public Health in June 2016 to assess community emergency preparedness. The CDC's CASPER toolkit provides detailed guidance for exercises in urban areas where city blocks are well defined with many single family homes. Converting the exercise to include rural areas with challenging geographical terrain, including accessing homes without public roads, required considerable adjustments in planning. Adequate preparations for vulnerable populations with English linguistic barriers required additional significant resources. Lessons learned are presented from the first countywide CASPER exercise in Oregon. Approximately 61% of interviews were completed, and 85% of volunteers reported they would participate in another CASPER exercise. Results from the emergency preparedness survey will be presented elsewhere. This experience indicates the most important considerations for conducting a CASPER exercise are oversampling clusters, overrecruiting volunteers, anticipating the actual cost of staff time, and ensuring timely language services are available during the event.

Patterns of physiological activity accompanying performance on a perceptual-motor task.

DOT National Transportation Integrated Search

1969-04-01

Air traffic controllers are required to spend considerable periods of time observing radar displays. Yet, information regarding physiological measures which best reflect the attentional process in complex vigilance tasks is generally lacking. As an i...

PPP/nonreal-time trajectory program interface requirements and capabilities

NASA Technical Reports Server (NTRS)

Mcgavern, J. L.; Arbet, J. D.

1975-01-01

The selection process for interfacing a nonreal time trajectory program with the procedures and performance program is outlined; the interface provides summary data timelines for any desired trajectory profile. Consideration was given to two separate digital programs for satisfying capabilities. One was the CDC 6400 digital program BANDITO, and the second was the UNIVAC 1110 SVDS program.

31 CFR 103.38 - Nature of records and retention period.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Nature of records and retention... § 103.38 Nature of records and retention period. (a) Wherever it is required that there be retained... reasonable period of time, taking into consideration the nature of the record, and the amount of time expired...

78 FR 6273 - Public Use Limit on Commercial Dog Walking; Revised Disposal Conditions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-30

... THE PRESIDIO TRUST 36 CFR Part 1002 Public Use Limit on Commercial Dog Walking; Revised Disposal... walking four or more dogs at one time in Area B of the Presidio of San Francisco for consideration (Commercial Dog Walkers). The limit will require any person walking four or more dogs at one time for...

Barophysiology and Biophysics

NASA Technical Reports Server (NTRS)

Powell, Michael R.

1999-01-01

Decompression is an important aspect of extravehicular activity (EVA). Errors can result in decompression sickness (DCS) if the protective measures are too liberal, while valuable on-orbit time is dissipated in prophylactic methodologies that are excessively conservative. Nucleation is an important consideration in many natural events, and its control is very important in many industrial procedures. The amount of Extravehicular Activity (EVA) that will be required during the construction of the International Space Station exceeds all of the other activity combined. The requirements in astronaut time and consumables (breathing oxygen and air) will be considerable. In an attempt to mitigate these requirements, Project ARGO was investigated in 1990 to investigate the effects of gravitational forces on the musculoskeletal system. This work has led to the present plans for the reduction of prebreathe duration. Over the past decade, research has been directed towards an understanding of the biophysical basis of the formation and growth of the decompression gas phase with the goal of improving the efficiency of the EVA process. In the past, we have direct work towards a more complete understanding of gas bubble formation and growth and exercise-enhanced washout during oxygen prebreathe.

Preliminary design polymeric materials experiment. [for space shuttles and Spacelab missions

NASA Technical Reports Server (NTRS)

Mattingly, S. G.; Rude, E. T.; Marshner, R. L.

1975-01-01

A typical Advanced Technology Laboratory mission flight plan was developed and used as a guideline for the identification of a number of experiment considerations. The experiment logistics beginning with sample preparation and ending with sample analysis are then overlaid on the mission in order to have a complete picture of the design requirements. The results of this preliminary design study fall into two categories. First specific preliminary designs of experiment hardware which is adaptable to a variety of mission requirements. Second, identification of those mission considerations which affect hardware design and will require further definition prior to final design. Finally, a program plan is presented which will provide the necessary experiment hardware in a realistic time period to match the planned shuttle flights. A bibliography of all material reviewed and consulted but not specifically referenced is provided.

75 FR 39577 - 30-Day Notice of Intention To Request Clearance of Collection of Information; Opportunity for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-09

... obligations assumed. It also requires that franchise fees be determined with consideration to the opportunity... that franchise fees can be determined in a timely manner and without an undue burden on the...

IDENTIFYING CHEMICAL COMPOUNDS IN THE ENVIRONMENT

EPA Science Inventory

The quality of drinking and recreational water is currently ascertained using indicator bacteria. The tests to analyze for these bacteria require a considerable length of time to complete, and do not discriminate between human and animal fecal material sources. To shorten the t...

Evaluation of a rapid diagnostic field test kit for identification of Phytophthora ramorum, P. kernoviae and other Phytophthora species at the point of inspection

Treesearch

C.R. Lane; E. Hobden; L. Laurenson; V.C. Barton; K.J.D. Hughes; H. Swan; N. Boonham; A.J. Inman

2008-01-01

Plant health regulations to prevent the introduction and spread of Phytophthora ramorum and P. kernoviae require rapid, cost effective diagnostic methods for screening large numbers of plant samples at the time of inspection. Current on-site techniques require expensive equipment, considerable expertise and are not suited for plant...

Comparing bandwidth requirements for digital baseband signals.

NASA Technical Reports Server (NTRS)

Houts, R. C.; Green, T. A.

1972-01-01

This paper describes the relative bandwidth requirements of the common digital baseband signaling techniques used for data transmission. Bandwidth considerations include the percentage of total power in a properly encoded PN sequence passed at bandwidths of 0.5, 1, 2 and 3 times the reciprocal of the bit interval. The signals considered in this study are limited to the binary class. The study compares such signaling techniques as delay modulation, bipolar, biternary, duobinary, pair selected ternary and time polarity control in addition to the conventional NRZ, RZ and BI-phi schemes.

Real-time data display for AFTI/F-16 flight testing

NASA Technical Reports Server (NTRS)

Harney, P. F.

1982-01-01

Advanced fighter technologies to improve air to air and air to surface weapon delivery and survivability is demonstrated. Real time monitoring of aircraft operation during flight testing is necessary not only for safety considerations but also for preliminary evaluation of flight test results. The complexity of the AFTI/F-16 aircraft requires an extensive capability to accomplish real time data goals; that capability and the resultant product are described.

Cherenkov radiation conversion and collection considerations for a gamma bang time/reaction history diagnostic for the NIF.

PubMed

Herrmann, Hans W; Mack, Joseph M; Young, Carlton S; Malone, Robert M; Stoeffl, Wolfgang; Horsfield, Colin J

2008-10-01

Bang time and reaction history measurements are fundamental components of diagnosing inertial confinement fusion (ICF) implosions and will be essential contributors to diagnosing attempts at ignition on the National Ignition Facility (NIF). Fusion gammas provide a direct measure of fusion interaction rate without being compromised by Doppler spreading. Gamma-based gas Cherenkov detectors that convert fusion gamma rays to optical Cherenkov photons for collection by fast recording systems have been developed and fielded at Omega. These systems have established their usefulness in illuminating ICF physics in several experimental campaigns. Bang time precision better than 25 ps has been demonstrated, well below the 50 ps accuracy requirement defined by the NIF system design requirements. A comprehensive, validated numerical study of candidate systems is providing essential information needed to make a down selection based on optimization of sensitivity, bandwidth, dynamic range, cost, and NIF logistics. This paper presents basic design considerations arising from the two-step conversion process from gamma rays to relativistic electrons to UV/visible Cherenkov radiation.

Modelling approaches: the case of schizophrenia.

PubMed

Heeg, Bart M S; Damen, Joep; Buskens, Erik; Caleo, Sue; de Charro, Frank; van Hout, Ben A

2008-01-01

Schizophrenia is a chronic disease characterized by periods of relative stability interrupted by acute episodes (or relapses). The course of the disease may vary considerably between patients. Patient histories show considerable inter- and even intra-individual variability. We provide a critical assessment of the advantages and disadvantages of three modelling techniques that have been used in schizophrenia: decision trees, (cohort and micro-simulation) Markov models and discrete event simulation models. These modelling techniques are compared in terms of building time, data requirements, medico-scientific experience, simulation time, clinical representation, and their ability to deal with patient heterogeneity, the timing of events, prior events, patient interaction, interaction between co-variates and variability (first-order uncertainty). We note that, depending on the research question, the optimal modelling approach should be selected based on the expected differences between the comparators, the number of co-variates, the number of patient subgroups, the interactions between co-variates, and simulation time. Finally, it is argued that in case micro-simulation is required for the cost-effectiveness analysis of schizophrenia treatments, a discrete event simulation model is best suited to accurately capture all of the relevant interdependencies in this chronic, highly heterogeneous disease with limited long-term follow-up data.

A STUDY ON TEMPORAL DISTRIBUTION OF FREIGHT TRANSPORTATION IN CONSIDERATION OF DAILY WORK-LIFE CYCLE

NASA Astrophysics Data System (ADS)

Kitaoka, Daiki; Hara, Hidetaka; Oeda, Yoshinao; Sumi, Tomonori

As advanced freight service is demanded, the time related requirements fo r freight transportation becomes more and more significant. This study, focusing on temporal distribution of freight transportation responding to the travel time, developed a shipment departure time decision model for each item, aiming at quantitatively grasping social requirement in the time domain. The model takes account of the daily work cycle of both work cy cles of shippers and carriers along with the travel time. The proposed model has a similar structure as that derived from the previous studies taking account of the daily living cycle of individuals. This model properly reproduced temporal distribution of shipment departure time that changes depending on the length of necessary lead time for each item.

Method to enhance the performance of synthetic origin-destination (O-D) trip table estimation models.

DOT National Transportation Integrated Search

1998-01-01

The conventional methods of determining origin-destination (O-D) trip tables involve elaborate surveys, e.g., home interviews, that require considerable time, staff, and funds. To overcome this drawback, a number of theoretical models that synthesize...

PERSISTENCE OF PHARMACEUTICALS AND OTHER WASTEWATER RELATED COMPOUNDS

EPA Science Inventory

The quality of drinking and recreational water is currently ascertained using indicator bacteria. However, the tests to analyze for these bacteria require a considerable length of time to complete, and do not discriminate between human and animal fecal material sources. One sol...

TRANSPORT OF CHEMICAL AND MICROBIAL CONTAMINANTS FROM KNOWN WASTEWATER DISCHARGES

EPA Science Inventory

The quality of drinking and recreational water is currently ascertained using indicator bacteria, such as Escherichia coli and fecal enterococci. However, the tests to analyze for these bacteria require a considerable length of time to complete, and do not discriminate between ...

Modeling as a tool for management of saline soils and irrigation waters

USDA-ARS?s Scientific Manuscript database

Optimal management of saline soils and irrigation waters requires consideration of many interrelated factors including, climate, water applications and timing, water flow, plant water uptake, soil chemical reactions, plant response to salinity and solution composition, soil hydraulic properties and ...

The 100 kW space station. [regenerative fuel cells and nickel hydrogen and nickel cadmium batteries for solar arrays

NASA Technical Reports Server (NTRS)

Mckhann, G.

1977-01-01

Solar array power systems for the space construction base are discussed. Nickel cadmium and nickel hydrogen batteries are equally attractive relative to regenerative fuel cell systems at 5 years life. Further evaluation of energy storage system life (low orbit conditions) is required. Shuttle and solid polymer electrolyte fuel cell technology appears adequate; large units (approximately four times shuttle) are most appropriate and should be studied for a 100 KWe SCB system. A conservative NiH2 battery DOD (18.6%) was elected due to lack of test data and offers considerable improvement potential. Multiorbit load averaging and reserve capacity requirements limit nominal DOD to 30% to 50% maximum, independent of life considerations.

Classroom evaluation of the Arlyn Arm robotic workstation.

PubMed

Eberhardt, S P; Osborne, J; Rahman, T

2000-01-01

High school and junior high school students with neuromuscular weakness and other disorders of the arms evaluated a recently commercialized robotic workstation, the Arlyn Arm, to carry out art projects and science experiments. These tasks were designed for independent execution with the workstation using standard or custom-designed tools. Each task was divided into subtasks, and the execution time of each subtask was determined as a measure of efficiency. Special attention was given to the causes of required experimenter intervention. While subjects easily accomplished some subtasks, others required considerable intervention. Most of these interventions could be avoided by further customizing accessories. It is concluded that the Arlyn Arm workstation could be of considerable benefit in a classroom setting to persons with severe neuromuscular disorders.

Description of the computations and pilot procedures for planning fuel-conservative descents with a small programmable calculator

NASA Technical Reports Server (NTRS)

Vicroy, D. D.; Knox, C. E.

1983-01-01

A simplified flight management descent algorithm was developed and programmed on a small programmable calculator. It was designed to aid the pilot in planning and executing a fuel conservative descent to arrive at a metering fix at a time designated by the air traffic control system. The algorithm may also be used for planning fuel conservative descents when time is not a consideration. The descent path was calculated for a constant Mach/airspeed schedule from linear approximations of airplane performance with considerations given for gross weight, wind, and nonstandard temperature effects. The flight management descent algorithm and the vertical performance modeling required for the DC-10 airplane is described.

The impact of regulations, safety considerations and physical limitations on research progress at maximum biocontainment.

PubMed

Shurtleff, Amy C; Garza, Nicole; Lackemeyer, Matthew; Carrion, Ricardo; Griffiths, Anthony; Patterson, Jean; Edwin, Samuel S; Bavari, Sina

2012-12-01

We describe herein, limitations on research at biosafety level 4 (BSL-4) containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedures. These limitations can severely impact the number of collaborations and size of research projects investigating microbial pathogens of biodefense concern. Acquisition, use, storage, and transfer of biological select agents and toxins (BSAT) are highly regulated due to their potential to pose a severe threat to public health and safety. All federal, state, city, and local regulations must be followed to obtain and maintain registration for the institution to conduct research involving BSAT. These include initial screening and continuous monitoring of personnel, controlled access to containment laboratories, accurate and current BSAT inventory records. Safety considerations are paramount in BSL-4 containment laboratories while considering the types of research tools, workflow and time required for conducting both in vivo and in vitro experiments in limited space. Required use of a positive-pressure encapsulating suit imposes tremendous physical limitations on the researcher. Successful mitigation of these constraints requires additional time, effort, good communication, and creative solutions. Test and evaluation of novel vaccines and therapeutics conducted under good laboratory practice (GLP) conditions for FDA approval are prioritized and frequently share the same physical space with important ongoing basic research studies. The possibilities and limitations of biomedical research involving microbial pathogens of biodefense concern in BSL-4 containment laboratories are explored in this review.

The Impact of Regulations, Safety Considerations and Physical Limitations on Research Progress at Maximum Biocontainment

PubMed Central

Shurtleff, Amy C.; Garza, Nicole; Lackemeyer, Matthew; Carrion, Ricardo; Griffiths, Anthony; Patterson, Jean; Edwin, Samuel S.; Bavari, Sina

2012-01-01

We describe herein, limitations on research at biosafety level 4 (BSL-4) containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedures. These limitations can severely impact the number of collaborations and size of research projects investigating microbial pathogens of biodefense concern. Acquisition, use, storage, and transfer of biological select agents and toxins (BSAT) are highly regulated due to their potential to pose a severe threat to public health and safety. All federal, state, city, and local regulations must be followed to obtain and maintain registration for the institution to conduct research involving BSAT. These include initial screening and continuous monitoring of personnel, controlled access to containment laboratories, accurate and current BSAT inventory records. Safety considerations are paramount in BSL-4 containment laboratories while considering the types of research tools, workflow and time required for conducting both in vivo and in vitro experiments in limited space. Required use of a positive-pressure encapsulating suit imposes tremendous physical limitations on the researcher. Successful mitigation of these constraints requires additional time, effort, good communication, and creative solutions. Test and evaluation of novel vaccines and therapeutics conducted under good laboratory practice (GLP) conditions for FDA approval are prioritized and frequently share the same physical space with important ongoing basic research studies. The possibilities and limitations of biomedical research involving microbial pathogens of biodefense concern in BSL-4 containment laboratories are explored in this review. PMID:23342380

Design considerations in clustering nuclear rocket engines

NASA Technical Reports Server (NTRS)

Sager, Paul H.

1992-01-01

An initial investigation of the design considerations in clustering nuclear rocket engines for space transfer vehicles has been made. The clustering of both propulsion modules (which include start tanks) and nuclear rocket engines installed directly to a vehicle core tank appears to be feasible. Special provisions to shield opposite run tanks and the opposite side of a core tank - in the case of the boost pump concept - are required; the installation of a circumferential reactor side shield sector appears to provide an effective solution to this problem. While the time response to an engine-out event does not appear to be critical, the gimbal displacement required appears to be important. Since an installation of three engines offers a substantial reduction in gimbal requirements for engine-out and it may be possible to further enhance mission reliability with the greater number of engines, it is recommended that a cluster of four engines be considered.

Design considerations in clustering nuclear rocket engines

NASA Astrophysics Data System (ADS)

Sager, Paul H.

1992-07-01

An initial investigation of the design considerations in clustering nuclear rocket engines for space transfer vehicles has been made. The clustering of both propulsion modules (which include start tanks) and nuclear rocket engines installed directly to a vehicle core tank appears to be feasible. Special provisions to shield opposite run tanks and the opposite side of a core tank - in the case of the boost pump concept - are required; the installation of a circumferential reactor side shield sector appears to provide an effective solution to this problem. While the time response to an engine-out event does not appear to be critical, the gimbal displacement required appears to be important. Since an installation of three engines offers a substantial reduction in gimbal requirements for engine-out and it may be possible to further enhance mission reliability with the greater number of engines, it is recommended that a cluster of four engines be considered.

Evaluating the Veterans Health Administration's Staffing Methodology Model: A Reliable Approach.

PubMed

Taylor, Beth; Yankey, Nicholas; Robinson, Claire; Annis, Ann; Haddock, Kathleen S; Alt-White, Anna; Krein, Sarah L; Sales, Anne

2015-01-01

All Veterans Health Administration facilities have been mandated to use a standardized method of determining appropriate direct-care staffing by nursing personnel. A multi-step process was designed to lead to projection of full-time equivalent employees required for safe and effective care across all inpatient units. These projections were intended to develop appropriate budgets for each facility. While staffing levels can be increased, even in facilities subject to budget and personnel caps, doing so requires considerable commitment at all levels of the facility. This commitment must come from front-line nursing personnel to senior leadership, not only in nursing and patient care services, but throughout the hospital. Learning to interpret and rely on data requires a considerable shift in thinking for many facilities, which have relied on historical levels to budget for staffing, but which does not take into account the dynamic character of nursing units and patient need.

Review and Assessment of JPL's Thermal Margins

NASA Technical Reports Server (NTRS)

Siebes, G.; Kingery, C.; Farguson, C.; White, M.; Blakely, M.; Nunes, J.; Avila, A.; Man, K.; Hoffman, A.; Forgrave, J.

2012-01-01

JPL has captured its experience from over four decades of robotic space exploration into a set of design rules. These rules have gradually changed into explicit requirements and are now formally implemented and verified. Over an extended period of time, the initial understanding of intent and rationale for these rules has faded and rules are now frequently applied without further consideration. In the meantime, mission classes and their associated risk postures have evolved, coupled with resource constraints and growing design diversity, bringing into question the current "one size fits all" thermal margin approach. This paper offers a systematic review of the heat flow path from an electronic junction to the eventual heat rejection to space. This includes the identification of different regimes along this path and the associated requirements. The work resulted in a renewed understanding of the intent behind JPL requirements for hot thermal margins and a framework for relevant considerations, which in turn enables better decision making when a deviation to these requirements is considered.

A method to enhance the performance of synthetic origin-destination (O-D) trip table estimation models.

DOT National Transportation Integrated Search

1998-01-01

The conventional methods of determining origin-destination (O-D) trip tables involve elaborate surveys, e.g., home interviews, that require considerable time, staff, and funds. To overcome this drawback, a number of theoretical models that synthesize...

Effective Informal Learning: Considerations for the Workplace.

ERIC Educational Resources Information Center

Yannie, Mark

2002-01-01

Offers practical advice for learning more effectively on the job. Highlights include types of communication, including written and verbal; informal learning; a work environment that is conducive to informal learning, including organizational culture, job responsibilities, performance requirements, time and scheduling factors, and career stage;…

Managing a Library Binding Program.

ERIC Educational Resources Information Center

Merrill-Oldham, Jan

Library binding is one of the activities typically included in newly created preservation departments, but librarians continue to discover that transforming a traditional binding program into one that better meets preservation objectives requires considerable investment of time. This resource guide is intended to help libraries review their…

Design considerations for divers' breathing gas systems

NASA Technical Reports Server (NTRS)

Hansen, O. R.

1972-01-01

Some of the design methods used to establish the gas storage, mixing, and transfer requirements for existing deep dive systems are discussed. Gas mixing systems appear essential to provide the low oxygen concentration mixtures within the converging tolerance range dictated by applications to increasing depths. Time related use of gas together with the performance of the gas transfer system insures a reasonable time frame for systems application.

Some evidentiary considerations for physician billing.

PubMed

Rooks, Franklin J

2011-01-01

In a criminal prosecution for medical billing fraud alleging up-coding and overbilling, the government's evidence may encompass the practice's entire billings and draw inferences from them. In addition, fraud may be demonstrated through statistical analysis comparing a physician's billings relative to other providers of the same specialty. The Federal Rules of Evidence govern the admissibility of evidence during a trial, to provide fairness for both the prosecution and the defense. Physicians and practice managers should be well versed in the billing requirements and particularly careful when CPT codes are expressed in terms of "required times" as opposed to "typical times."

21 CFR 1309.72 - Felony conviction; employer responsibilities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF MANUFACTURERS, DISTRIBUTORS, IMPORTERS AND EXPORTERS OF LIST I CHEMICALS Security Requirements... consideration of employment of persons who will have access to listed chemicals, who have been convicted of a felony offense relating to controlled substances or listed chemicals, or who have, at any time, had an...

Evolution or Revolution: Mobility Requirements for the AirLand Battle Future Concept

DTIC Science & Technology

1991-02-20

analysis and the model a theoretical framework for tactical mobility is established. The considerations for tactical mobility on the future battlefield are...examined in the context of the theoretical framework . Finally, using the criteria of sufficiency, feasibility, and the time/space continuum, the

Setting up Targeted Research Interviews: A Primer for Students and New Interviewers

ERIC Educational Resources Information Center

Noy, Darren

2009-01-01

This article analyzes key strategic considerations for setting up targeted research interviews, including human subjects and Institutional Review Board requirements, approaching respondents, the medium of contact, using technology, cultural conceptions of time and commitment, using networks, wading through bureaucracies, and watching for warning…

Precipitation data considerations for evaluating subdaily changes in rainless periods due to climate change

USDA-ARS?s Scientific Manuscript database

Quantifying magnitudes and frequencies of rainless times between storms (TBS), or storm occurrence, is required for generating continuous sequences of precipitation for modeling inputs to small watershed models for conservation studies. Two parameters characterize TBS, minimum TBS (MTBS) and averag...

77 FR 425 - Changes in Flood Elevation Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-05

... accordance with 44 CFR 65.4. National Environmental Policy Act. This interim rule is categorically excluded from the requirements of 44 CFR part 10, Environmental Consideration. An environmental [[Page 426..., 2011; Ross, Chairman, Columbia (11-04-5127P). The Columbia County County Board of News-Times...

Report of CEC Study Committee on Construction Management.

ERIC Educational Resources Information Center

Consulting Engineers Council of the U.S., Washington, DC.

Changing times place new demands on those involved in the implementation of construction projects. Within a relatively few years, the size and complexity of projects has grown substantially. Environmental and other public and social considerations are increasingly significant. With growing complexity, the requirements for effective project…

Evaluation of Check in/Check out for Students with Internalizing Behavior Problems

ERIC Educational Resources Information Center

Hunter, Katherine K.; Chenier, Jeffrey S.; Gresham, Frank M.

2014-01-01

Internalizing behaviors are directed inward toward the child and are frequently overlooked in classrooms compared with externalizing behaviors. When internalizing behaviors are identified, cognitive-behavioral interventions (CBIs) are typically the intervention of choice; however, CBIs are time-consuming and require considerable skill and…

What We've Learned about Assessing Hands-On Science.

ERIC Educational Resources Information Center

Shavelson, Richard J.; Baxter, Gail P.

1992-01-01

A recent study compared hands-on scientific inquiry assessment to assessments involving lab notebooks, computer simulations, short-answer paper-and-pencil problems, and multiple-choice questions. Creating high quality performance assessments is a costly, time-consuming process requiring considerable scientific and technological know-how. Improved…

78 FR 54722 - Reports, Forms and Record Keeping Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-05

... submission requesting confidential treatment. This estimate will vary based on the size of the submission, with smaller and voluntary submissions taking considerably less time to prepare. The agency based this... approximately 460 requests for confidential treatment annually. This figure is based on the average number of...

Comparison of Traditional and Trial-Based Methodologies for Conducting Functional Analyses

ERIC Educational Resources Information Center

LaRue, Robert H.; Lenard, Karen; Weiss, Mary Jane; Bamond, Meredith; Palmieri, Mark; Kelley, Michael E.

2010-01-01

Functional analysis represents a sophisticated and empirically supported functional assessment procedure. While these procedures have garnered considerable empirical support, they are often underused in clinical practice. Safety risks resulting from the evocation of maladaptive behavior and the length of time required to conduct functional…

Description of the computations and pilot procedures for planning fuel-conservative descents with a small programmable calculator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vicroy, D.D.; Knox, C.E.

A simplified flight management descent algorithm was developed and programmed on a small programmable calculator. It was designed to aid the pilot in planning and executing a fuel conservative descent to arrive at a metering fix at a time designated by the air traffic control system. The algorithm may also be used for planning fuel conservative descents when time is not a consideration. The descent path was calculated for a constant Mach/airspeed schedule from linear approximations of airplane performance with considerations given for gross weight, wind, and nonstandard temperature effects. The flight management descent algorithm and the vertical performance modelingmore » required for the DC-10 airplane is described.« less

Transformational Spaceport and Range Capabilities Roadmap Interim Review to National Research Council External Review Panel

NASA Technical Reports Server (NTRS)

Poniatowski, Karen

2005-01-01

Contents include the following: Overview/Introduction. Roadmap Approach/Considerations. Roadmap Timeline/Spirals. Requirements Development. Spaceport/Range Capabilities. Mixed Range Architecture. User Requirements/Customer Considerations. Manifest Considerations. Emerging Launch User Requirements. Capability Breakdown Structure/Assessment. Roadmap Team Observations. Transformational Range Test Concept. Roadmap Team Conclusions. Next Steps.

The Use of Computer Simulation Techniques in Educational Planning.

ERIC Educational Resources Information Center

Wilson, Charles Z.

Computer simulations provide powerful models for establishing goals, guidelines, and constraints in educational planning. They are dynamic models that allow planners to examine logical descriptions of organizational behavior over time as well as permitting consideration of the large and complex systems required to provide realistic descriptions of…

An Evaluation of an Automated Approach to Concept-Based Grammar Instruction

ERIC Educational Resources Information Center

Lyddon, Paul A.

2012-01-01

Acquiring sufficient linguistic proficiency to perform competently in academic and professional contexts generally requires substantial study time beyond what most language programs can offer in the classroom. As such, teachers and students alike would benefit considerably from high quality self-access materials promoting independent learning out…

Efficient group decision making in workshop settings

Treesearch

Daniel L. Schmoldt; David L. Peterson

2001-01-01

Public land managers must treat multiple values coincidentally in time and space, which requires the participation of multiple resource specialists and consideration of diverse clientele interests in the decision process. This implies decision making that includes multiple participants, both internally and externally. Decades of social science research on decision...

PERSISTENCE OF PHARMACEUTICALS AND OTHER WASTEWATER RELATED COMPOUNDS: UTILITY AS INDICATORS OF HUMAN FECAL CONTAMINATION

EPA Science Inventory

The quality of drinking and recreational water is currently ascertained using indicator bacteria. The tests to analyze for these bacteria require a considerable length of time to complete, and do not discriminate between human and animal fecal material sources. To shorten the t...

The President's Role in Advancing Civic Engagement: The Widener-Chester Partnership

ERIC Educational Resources Information Center

Harris, James T., III

2009-01-01

Efforts by metropolitan universities to engage in meaningful and democratic partnerships with community organizations require much time, effort, and considerable resources from the university and its various constituents. Widener University is located in a distressed urban environment. This study, presented from the perspective of the university's…

Interspecific chromosome substitution lines from Gossypium barbadense and G. tomentosum in Upland cotton improvement

USDA-ARS?s Scientific Manuscript database

The merit of interspecific germplasm introgression has been well appreciated in many crop species, but it has not been exploited well in Upland cotton improvement. Wide-cross introgression typically requires considerable time and effort to circumvent and overcome biological, genetic, and cytogenetic...

Using One Evaluation to Affect Many

ERIC Educational Resources Information Center

Ong, Angelina; Cadenhead, Christina

2015-01-01

Although visitor studies has gained in popularity in the museum field over the past decade, staff members in many institutions still believe that evaluation is a time-consuming, often complex practice that requires considerable resources and expertise. Over the past few years, evaluation professionals have begun developing innovative methods to…

Turning Transfer Inside Out: The Affordances of Virtual Worlds and Mobile Devices in Real World Contexts for Teaching about Causality across Time and Distance in Ecosystems

ERIC Educational Resources Information Center

Grotzer, Tina A.; Powell, Megan M.; Derbiszewska, Katarzyna M.; Courter, Caroline J.; Kamarainen, Amy M.; Metcalf, Shari J.; Dede, Christopher J.

2015-01-01

Reasoning about ecosystems includes consideration of causality over temporal and spatial distances; yet learners typically focus on immediate time frames and local contexts. Teaching students to reason beyond these boundaries has met with some success based upon tests that cue students to the types of reasoning required. Virtual worlds offer an…

Transportation Energy Futures Series: Vehicle Technology Deployment Pathways: An Examination of Timing and Investment Constraints

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plotkin, S.; Stephens, T.; McManus, W.

2013-03-01

Scenarios of new vehicle technology deployment serve various purposes; some will seek to establish plausibility. This report proposes two reality checks for scenarios: (1) implications of manufacturing constraints on timing of vehicle deployment and (2) investment decisions required to bring new vehicle technologies to market. An estimated timeline of 12 to more than 22 years from initial market introduction to saturation is supported by historical examples and based on the product development process. Researchers also consider the series of investment decisions to develop and build the vehicles and their associated fueling infrastructure. A proposed decision tree analysis structure could bemore » used to systematically examine investors' decisions and the potential outcomes, including consideration of cash flow and return on investment. This method requires data or assumptions about capital cost, variable cost, revenue, timing, and probability of success/failure, and would result in a detailed consideration of the value proposition of large investments and long lead times. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency effort to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.« less

Transportation Energy Futures Series. Vehicle Technology Deployment Pathways. An Examination of Timing and Investment Constraints

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plotkin, Steve; Stephens, Thomas; McManus, Walter

2013-03-01

Scenarios of new vehicle technology deployment serve various purposes; some will seek to establish plausibility. This report proposes two reality checks for scenarios: (1) implications of manufacturing constraints on timing of vehicle deployment and (2) investment decisions required to bring new vehicle technologies to market. An estimated timeline of 12 to more than 22 years from initial market introduction to saturation is supported by historical examples and based on the product development process. Researchers also consider the series of investment decisions to develop and build the vehicles and their associated fueling infrastructure. A proposed decision tree analysis structure could bemore » used to systematically examine investors' decisions and the potential outcomes, including consideration of cash flow and return on investment. This method requires data or assumptions about capital cost, variable cost, revenue, timing, and probability of success/failure, and would result in a detailed consideration of the value proposition of large investments and long lead times. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency effort to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.« less

Practical considerations in the development of hemoglobin-based oxygen therapeutics.

PubMed

Kim, Hae Won; Estep, Timothy N

2012-09-01

The development of hemoglobin based oxygen therapeutics (HBOCs) requires consideration of a number of factors. While the enabling technology derives from fundamental research on protein biochemistry and biological interactions, translation of these research insights into usable medical therapeutics demands the application of considerable technical expertise and consideration and reconciliation of a myriad of manufacturing, medical, and regulatory requirements. The HBOC development challenge is further exacerbated by the extremely high intravenous doses required for many of the indications contemplated for these products, which in turn implies an extremely high level of purity is required. This communication discusses several of the important product configuration and developmental considerations that impact the translation of fundamental research discoveries on HBOCs into usable medical therapeutics.

Program Helps Decompose Complicated Design Problems

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.

1993-01-01

Time saved by intelligent decomposition into smaller, interrelated problems. DeMAID is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problem. Displays modules in N x N matrix format. Requires investment of time to generate and refine list of modules for input, it saves considerable amount of money and time in total design process, particularly new design problems in which ordering of modules has not been defined. Program also implemented to examine assembly-line process or ordering of tasks and milestones.

The solar exposure time required for vitamin D3 synthesis in the human body estimated by numerical simulation and observation in Japan.

PubMed

Miyauchi, Masaatsu; Hirai, Chizuko; Nakajima, Hideaki

2013-01-01

Although the importance of solar radiation for vitamin D3 synthesis in the human body is well known, the solar exposure time required to prevent vitamin D deficiency has not been determined in Japan. This study attempted to identify the time of solar exposure required for vitamin D3 synthesis in the body by season, time of day, and geographic location (Sapporo, Tsukuba, and Naha) using both numerical simulations and observations. According to the numerical simulation for Tsukuba at noon in July under a cloudless sky, 3.5 min of solar exposure are required to produce 5.5 μg vitamin D3 per 600 cm2 skin corresponding to the area of a face and the back of a pair of hands without ingestion from foods. In contrast, it took 76.4 min to produce the same quantity of vitamin D3 at Sapporo in December, at noon under a cloudless sky. The necessary exposure time varied considerably with the time of the day. For Tsukuba at noon in December, 22.4 min were required, but 106.0 min were required at 09:00 and 271.3 min were required at 15:00 for the same meteorological conditions. Naha receives high levels of ultraviolet radiation allowing vitamin D3 synthesis almost throughout the year.

Perioperative Temperature Measurement Considerations Relevant to Reporting Requirements for National Quality Programs Using Data From Anesthesia Information Management Systems.

PubMed

Epstein, Richard H; Dexter, Franklin; Hofer, Ira S; Rodriguez, Luis I; Schwenk, Eric S; Maga, Joni M; Hindman, Bradley J

2018-02-01

Perioperative hypothermia may increase the incidences of wound infection, blood loss, transfusion, and cardiac morbidity. US national quality programs for perioperative normothermia specify the presence of at least 1 "body temperature" ≥35.5°C during the interval from 30 minutes before to 15 minutes after the anesthesia end time. Using data from 4 academic hospitals, we evaluated timing and measurement considerations relevant to the current requirements to guide hospitals wishing to report perioperative temperature measures using electronic data sources. Anesthesia information management system databases from 4 hospitals were queried to obtain intraoperative temperatures and intervals to the anesthesia end time from discontinuation of temperature monitoring, end of surgery, and extubation. Inclusion criteria included age >16 years, use of a tracheal tube or supraglottic airway, and case duration ≥60 minutes. The end-of-case temperature was determined as the maximum intraoperative temperature recorded within 30 minutes before the anesthesia end time (ie, the temperature that would be used for reporting purposes). The fractions of cases with intervals >30 minutes between the last intraoperative temperature and the anesthesia end time were determined. Among the hospitals, averages (binned by quarters) of 34.5% to 59.5% of cases had intraoperative temperature monitoring discontinued >30 minutes before the anesthesia end time. Even if temperature measurement had been continued until extubation, averages of 5.9% to 20.8% of cases would have exceeded the allowed 30-minute window. Averages of 8.9% to 21.3% of cases had end-of-case intraoperative temperatures <35.5°C (ie, a quality measure failure). Because of timing considerations, a substantial fraction of cases would have been ineligible to use the end-of-case intraoperative temperature for national quality program reporting. Thus, retrieval of postanesthesia care unit temperatures would have been necessary. A substantive percentage of cases had end-of-case intraoperative temperatures below the 35.5°C threshold, also requiring postoperative measurement to determine whether the quality measure was satisfied. Institutions considering reporting national quality measures for perioperative normothermia should consider the technical and logistical issues identified to achieve a high level of compliance based on the specified regulatory language.

Requirements Flowdown for Prognostics and Health Management

NASA Technical Reports Server (NTRS)

Goebel, Kai; Saxena, Abhinav; Roychoudhury, Indranil; Celaya, Jose R.; Saha, Bhaskar; Saha, Sankalita

2012-01-01

Prognostics and Health Management (PHM) principles have considerable promise to change the game of lifecycle cost of engineering systems at high safety levels by providing a reliable estimate of future system states. This estimate is a key for planning and decision making in an operational setting. While technology solutions have made considerable advances, the tie-in into the systems engineering process is lagging behind, which delays fielding of PHM-enabled systems. The derivation of specifications from high level requirements for algorithm performance to ensure quality predictions is not well developed. From an engineering perspective some key parameters driving the requirements for prognostics performance include: (1) maximum allowable Probability of Failure (PoF) of the prognostic system to bound the risk of losing an asset, (2) tolerable limits on proactive maintenance to minimize missed opportunity of asset usage, (3) lead time to specify the amount of advanced warning needed for actionable decisions, and (4) required confidence to specify when prognosis is sufficiently good to be used. This paper takes a systems engineering view towards the requirements specification process and presents a method for the flowdown process. A case study based on an electric Unmanned Aerial Vehicle (e-UAV) scenario demonstrates how top level requirements for performance, cost, and safety flow down to the health management level and specify quantitative requirements for prognostic algorithm performance.

Evaluation of the efficiency and fault density of software generated by code generators

NASA Technical Reports Server (NTRS)

Schreur, Barbara

1993-01-01

Flight computers and flight software are used for GN&C (guidance, navigation, and control), engine controllers, and avionics during missions. The software development requires the generation of a considerable amount of code. The engineers who generate the code make mistakes and the generation of a large body of code with high reliability requires considerable time. Computer-aided software engineering (CASE) tools are available which generates code automatically with inputs through graphical interfaces. These tools are referred to as code generators. In theory, code generators could write highly reliable code quickly and inexpensively. The various code generators offer different levels of reliability checking. Some check only the finished product while some allow checking of individual modules and combined sets of modules as well. Considering NASA's requirement for reliability, an in house manually generated code is needed. Furthermore, automatically generated code is reputed to be as efficient as the best manually generated code when executed. In house verification is warranted.

X-rays only when you want them: optimized pump–probe experiments using pseudo-single-bunch operation

PubMed Central

Hertlein, M. P.; Scholl, A.; Cordones, A. A.; Lee, J. H.; Engelhorn, K.; Glover, T. E.; Barbrel, B.; Sun, C.; Steier, C.; Portmann, G.; Robin, D. S.

2015-01-01

Laser pump–X-ray probe experiments require control over the X-ray pulse pattern and timing. Here, the first use of pseudo-single-bunch mode at the Advanced Light Source in picosecond time-resolved X-ray absorption experiments on solutions and solids is reported. In this mode the X-ray repetition rate is fully adjustable from single shot to 500 kHz, allowing it to be matched to typical laser excitation pulse rates. Suppressing undesired X-ray pulses considerably reduces detector noise and improves signal to noise in time-resolved experiments. In addition, dose-induced sample damage is considerably reduced, easing experimental setup and allowing the investigation of less robust samples. Single-shot X-ray exposures of a streak camera detector using a conventional non-gated charge-coupled device (CCD) camera are also demonstrated. PMID:25931090

X-rays only when you want them: Optimized pump–probe experiments using pseudo-single-bunch operation

DOE PAGES

Hertlein, M. P.; Scholl, A.; Cordones, A. A.; ...

2015-04-02

Laser pump–X-ray probe experiments require control over the X-ray pulse pattern and timing. Here, the first use of pseudo-single-bunch mode at the Advanced Light Source in picosecond time-resolved X-ray absorption experiments on solutions and solids is reported. In this mode the X-ray repetition rate is fully adjustable from single shot to 500 kHz, allowing it to be matched to typical laser excitation pulse rates. Suppressing undesired X-ray pulses considerably reduces detector noise and improves signal to noise in time-resolved experiments. In addition, dose-induced sample damage is considerably reduced, easing experimental setup and allowing the investigation of less robust samples. Single-shotmore » X-ray exposures of a streak camera detector using a conventional non-gated charge-coupled device (CCD) camera are also demonstrated.« less

A numerical approach to controller design for the ACES facility

NASA Technical Reports Server (NTRS)

Frazier, W. Garth; Irwin, R. Dennis

1993-01-01

In recent years the employment of active control techniques for improving the performance of systems involving highly flexible structures has become a topic of considerable research interest. Most of these systems are quite complicated, using multiple actuators and sensors, and possessing high order models. The majority of analytical controller synthesis procedures capable of handling multivariable systems in a systematic way require considerable insight into the underlying mathematical theory to achieve a successful design. This insight is needed in selecting the proper weighting matrices or weighting functions to cast what is naturally a multiple constraint satisfaction problem into an unconstrained optimization problem. Although designers possessing considerable experience with these techniques have a feel for the proper choice of weights, others may spend a significant amount of time attempting to find an acceptable solution. Another disadvantage of such procedures is that the resulting controller has an order greater than or equal to that of the model used for the design. Of course, the order of these controllers can often be reduced, but again this requires a good understanding of the theory involved.

Time Step Considerations when Simulating Dynamic Behavior of High Performance Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tabares-Velasco, Paulo Cesar

2016-09-01

Building energy simulations, especially those concerning pre-cooling strategies and cooling/heating peak demand management, require careful analysis and detailed understanding of building characteristics. Accurate modeling of the building thermal response and material properties for thermally massive walls or advanced materials like phase change materials (PCMs) are critically important.

Requirements, Benefits, and Concerns of Technology Education Cooperating Teachers: An Exploratory Study among Nine Midwest Universities

ERIC Educational Resources Information Center

Busby, Joe R.; Mupinga, Davison M.

2007-01-01

Student teaching experience is important in the professional preparation of teachers. Successful teaching practice hinges on the effectiveness of cooperating teachers (CTs) who spend considerable time supervising and mentoring student teachers. Unfortunately, the welfare of the cooperating teachers is often neglected, and this is detrimental to…

Using DCOM to support interoperability in forest ecosystem management decision support systems

Treesearch

W.D. Potter; S. Liu; X. Deng; H.M. Rauscher

2000-01-01

Forest ecosystems exhibit complex dynamics over time and space. Management of forest ecosystems involves the need to forecast future states of complex systems that are often undergoing structural changes. This in turn requires integration of quantitative science and engineering components with sociopolitical, regulatory, and economic considerations. The amount of data...

Environmental control and life support system requirements and technology needs for advanced manned space missions

NASA Technical Reports Server (NTRS)

Powell, Ferolyn T.; Sedej, Melaine; Lin, Chin

1987-01-01

NASA has completed an environmental control and life support system (ECLSS) technology R&D plan for advanced missions which gave attention to the drivers (crew size, mission duration, etc.) of a range of manned missions under consideration. Key planning guidelines encompassed a time horizon greater than 50 years, funding resource requirements, an evolutionary approach to goal definition, and the funding of more than one approach to satisfy a given perceived requirement. Attention was given to the ECLSS requirements of transportation and service vehicles, platforms, bases and settlements, ECLSS functions and average load requirements, unique drivers for various missions, and potentially exploitable commonalities among vehicles and habitats.

Technical considerations for implementation of x-ray CT polymer gel dosimetry.

PubMed

Hilts, M; Jirasek, A; Duzenli, C

2005-04-21

Gel dosimetry is the most promising 3D dosimetry technique in current radiation therapy practice. X-ray CT has been shown to be a feasible method of reading out polymer gel dosimeters and, with the high accessibility of CT scanners to cancer hospitals, presents an exciting possibility for clinical implementation of gel dosimetry. In this study we report on technical considerations for implementation of x-ray CT polymer gel dosimetry. Specifically phantom design, CT imaging methods, imaging time requirements and gel dose response are investigated. Where possible, recommendations are made for optimizing parameters to enhance system performance. The dose resolution achievable with an optimized system is calculated given voxel size and imaging time constraints. Results are compared with MRI and optical CT polymer gel dosimetry results available in the literature.

48 CFR 29.304 - Matters requiring special consideration.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Matters requiring special consideration. 29.304 Section 29.304 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS TAXES State and Local Taxes 29.304 Matters requiring special...

48 CFR 29.304 - Matters requiring special consideration.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Matters requiring special consideration. 29.304 Section 29.304 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS TAXES State and Local Taxes 29.304 Matters requiring special...

48 CFR 29.304 - Matters requiring special consideration.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Matters requiring special consideration. 29.304 Section 29.304 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS TAXES State and Local Taxes 29.304 Matters requiring special...

48 CFR 29.304 - Matters requiring special consideration.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Matters requiring special consideration. 29.304 Section 29.304 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS TAXES State and Local Taxes 29.304 Matters requiring special...

48 CFR 29.304 - Matters requiring special consideration.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Matters requiring special consideration. 29.304 Section 29.304 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS TAXES State and Local Taxes 29.304 Matters requiring special...

Design and preliminary assessment of Vanderbilt hand exoskeleton.

PubMed

Gasser, Benjamin W; Bennett, Daniel A; Durrough, Christina M; Goldfarb, Michael

2017-07-01

This paper presents the design of a hand exoskeleton intended to enable or facilitate bimanual activities of daily living (ADLs) for individuals with chronic upper extremity hemiparesis resulting from stroke. The paper describes design of the battery-powered, self-contained exoskeleton and presents the results of initial testing with a single subject with hemiparesis from stroke. Specifically, an experiment was conducted requiring the subject to repeatedly remove the lid from a water bottle both with and without the hand exoskeleton. The relative times required to remove the lid from the bottles was considerably lower when using the exoskeleton. Specifically, the average amount of time required to grasp the bottle with the paretic hand without the exoskeleton was 25.9 s, with a standard deviation of 33.5 s, while the corresponding average amount of time required to grasp the bottle with the exoskeleton was 5.1 s, with a standard deviation of 1.9 s. Thus, the task time involving the paretic hand was reduced by a factor of five, while the standard deviation was reduced by a factor of 16.

Method for determining how to operate and control wind turbine arrays in utility systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Javid, S.H.; Hauth, R.L.; Younkins, T.D.

1984-01-01

A method for determining how utility wind turbine arrays should be controlled and operated on the load frequency control time-scale is presented. Initial considerations for setting wind turbine control requirements are followed by a description of open loop operation and of closed loop and feed forward wind turbine array control concepts. The impact of variations in array output on meeting minimum criteria are developed. The method for determining the required control functions is then presented and results are tabulated. (LEW)

Overview of the Design, Development, and Application of Nickel-hydrogen Batteries

NASA Technical Reports Server (NTRS)

Thaller, Lawrence H.; Zimmerman, Albert H.

2003-01-01

This document provides an overview of the design, development, and application of nickel-hydrogen (Ni-H2) battery technology for aerospace applications. It complements and updates the information presented in NASA RP-1314, NASA Handbook for Nickel- Hydrogen Batteries, published in 1993. Since that time, nickel-hydrogen batteries have become widely accepted for aerospace energy storage requirements and much more has been learned. The intent of this document is to capture some of that additional knowledge. This document addresses various aspects of nickel-hydrogen technology including the electrochemical reactions, cell component design, and selection considerations; overall cell and battery design considerations; charge control considerations; and manufacturing issues that have surfaced over the years that nickel-hydrogen battery technology has been the major energy storage technology for geosynchronous and low-Earth-orbiting satellites.

Eleven essential steps to purchasing or selling a medical practice.

PubMed

Barrett, William

2014-01-01

Based on our experience in representing more than 100 doctors and medical specialists in practice sales and acquisitions, we have identified 11 key considerations important to a deal. There are several issues to consider while going through the process of buying or selling a practice including the implementation of a "letter of intent" as a first step rather than drafting a contract, securing a lease, and verifying the property is not in violation of the local zoning requirements. There are also considerations with regard to the patients, which range from how will the accounts receivable at the time of the closing be handled to who is responsible for the handling of continued treatment in an ongoing case after a deal is finalized. This article details these considerations and more.

The impact of integrated water management on the Space Station propulsion system

NASA Technical Reports Server (NTRS)

Schmidt, George R.

1987-01-01

The water usage of elements in the Space Station integrated water system (IWS) is discussed, and the parameters affecting the overall water balance and the water-electrolysis propulsion-system requirements are considered. With nominal IWS operating characteristics, extra logistic water resupply (LWR) is found to be unnecessary in the satisfaction of the nominal propulsion requirements. With the consideration of all possible operating characteristics, LWR will not be required in 65.5 percent of the cases, and for 17.9 percent of the cases LWR can be eliminated by controlling the stay time of theShuttle Orbiter orbiter.

32 CFR Enclosure 1 - Requirements for Environmental Considerations-Global Commons

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 1 2011-07-01 2011-07-01 false Requirements for Environmental Considerations... ENVIRONMENT ENVIRONMENTAL EFFECTS ABROAD OF MAJOR DEPARTMENT OF DEFENSE ACTIONS Information requirements. Pt. 187, Encl. 1 Enclosure 1—Requirements for Environmental Considerations—Global Commons A. General. This...

32 CFR Enclosure 1 - Requirements for Environmental Considerations-Global Commons

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 1 2012-07-01 2012-07-01 false Requirements for Environmental Considerations... ENVIRONMENT ENVIRONMENTAL EFFECTS ABROAD OF MAJOR DEPARTMENT OF DEFENSE ACTIONS Information requirements. Pt. 187, Encl. 1 Enclosure 1—Requirements for Environmental Considerations—Global Commons A. General. This...

Wireless Sensor Node Power Profiling Based on IEEE 802.11 and IEEE 802.15.4 Communication Protocols. Modeling and Simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agarwal, Vivek; Richardson, Joseph; Zhang, Yanliang

Most wireless sensor network (comprising of thousands of WSNs) applications require operation over extended periods of time beginning with their deployment. Network lifetime is extremely critical for most applications and is one of the limiting factors for energy-constrained networks. Based on applications, there are wide ranges of different energy sources suitable for powering WSNs. A battery is traditionally used to power WSNs. The deployed WSN is required to last for long time. Due to finite amount of energy present in batteries, it is not feasible to replace batteries. Recently there has been a new surge in the area of energymore » harvesting were ambient energy in the environment can be utilized to prolong the lifetime of WSNs. Some of the sources of ambient energies are solar power, thermal gradient, human motion and body heat, vibrations, and ambient RF energy. The design and development of TEGs to power WSNs that would remain active for a long period of time requires comprehensive understanding of WSN operational. This motivates the research in modeling the lifetime, i.e., power consumption, of a WSN by taking into consideration various node and network level activities. A WSN must perform three essential tasks: sense events, perform quick local information processing of sensed events, and wirelessly exchange locally processed data with the base station or with other WSNs in the network. Each task has a power cost per unit tine and an additional cost when switching between tasks. There are number of other considerations that must also be taken into account when computing the power consumption associated with each task. The considerations includes: number of events occurring in a fixed active time period and the duration of each event, event-information processing time, total communication time, number of retransmission, etc. Additionally, at the network level the communication of information data packets between WSNs involves collisions, latency, and retransmission, which result in unanticipated power losses. This report focuses rigorous stochastic modeling of power demand for a schedule-driven WSN utilizing Institute of Electrical and Electronics Engineers 802.11 and 802.15.4 communication protocols. The model captures the generic operation of a schedule-driven WSN when an external event occurs, i.e., sensing, following by processing, and followed by communication. The report will present development of an expression to compute the expected energy consumption per operational cycle of a schedule-driven WSN by taking into consideration the node level activities, i.e., sensing and processing, and the network level activities, i.e., channel access, packet collision, retransmission attempts, and transmission of a data packet.« less

Accelerating scientific publication in biology

PubMed Central

Vale, Ronald D.

2015-01-01

Scientific publications enable results and ideas to be transmitted throughout the scientific community. The number and type of journal publications also have become the primary criteria used in evaluating career advancement. Our analysis suggests that publication practices have changed considerably in the life sciences over the past 30 years. More experimental data are now required for publication, and the average time required for graduate students to publish their first paper has increased and is approaching the desirable duration of PhD training. Because publication is generally a requirement for career progression, schemes to reduce the time of graduate student and postdoctoral training may be difficult to implement without also considering new mechanisms for accelerating communication of their work. The increasing time to publication also delays potential catalytic effects that ensue when many scientists have access to new information. The time has come for life scientists, funding agencies, and publishers to discuss how to communicate new findings in a way that best serves the interests of the public and the scientific community. PMID:26508643

[The work of medical doctors on psychiatric wards: an analysis of everyday activities].

PubMed

Putzhammer, A; Senft, I; Fleischmann, H; Klein, H E; Schmauss, M; Schreiber, W; Hajak, G

2006-03-01

In Germany, the economic situation of psychiatric hospitals has markedly changed during the last years. Whilst the number of patients has steadily increased, many clinics considerably reduced the number of therapeutic staff due to an increasing lack of financial support. The German psychiatry personnel regulations act defines the number of therapeutic staff required for an adequate psychiatric treatment, but the requirements of this regulations act nowadays are widely missed in most of the German psychiatric hospitals. This severely affects the therapeutic work on psychiatric wards. This study analyses tasks and activities of medical doctors on psychiatric wards and compares the hours spent with various types of activities with the amount of time that should be spent according to the personnel regulations act. Results show that doctors spend much more time with documentation and administrative work than originally intended by the personnel regulations act. They compensate this mainly by a reduction of time spent in direct contact with the patients. In this context, the number of psychotherapy sessions as well as sessions with the patients' relatives has been considerably reduced, whereas the time spent for emergency intervention and basic treatment still corresponds to the calculations according to the personnel regulations act. All in all, the results show that a reduction of therapeutic staff in psychiatric hospitals directly leads to a change in treatment settings with a focus on less individual treatment options.

A study of engineering student attributes and time to completion of first-year required courses at Texas A&M University

NASA Astrophysics Data System (ADS)

Kimball, Jorja Lay

For many years, colleges of engineering across the nation have required that a foundational set of courses be completed for entry into upper division coursework or into a specific engineering major. Since 1998, The Dwight Look College of Engineering at Texas A&M University (TAMU) has required that incoming first-time enrolling students complete a Core Body of Knowledge (CBK) with specific cumulative grade points required for specific majors. However, considerations of the time to completion of coursework and other student characteristics and academic factors have not been taken into consideration by TAMU, like most institutions. The purpose of this study is to determine for first year engineering students at TAMU the relationship of gender, ethnicity, engineering major, unmet financial need, cumulative grade point average, and total transfer hours on time to completion of CBK courses. The results of the analysis showed that cumulative grade point average (CGPA) had the strongest relationship to completion of CBK of any independent variable in this study. Statistical significance was found for the following variables in this study: CGPA, gender, ethnicity, and unmet financial need. For the study's variable of major, statistical significance was found for Chemical, Electrical, and Computer Engineering majors. The one variable in this study that did not show statistical significance in relation to time to completion of CBK was transfer credit. Findings with implications for recruitment and retention of underrepresented in engineering is a statistical significance indicating that on average females are taking less time than males to complete CBK. The conclusion from the study is that efforts to attract more women into engineering have merit as do programs to support underrepresented students in order that they may complete CBK at a faster pace. Further study to determine profiles of those majors where statistical significance was found for students taking a greater or lesser amount of time for CBK completion than the mean is recommended, as is ongoing data collection and comparison for current cohorts of engineering majors at TAMU.

Implementation of RF Circuitry for Real-Time Digital Beam-Forming SAR Calibration Schemes

NASA Technical Reports Server (NTRS)

Horst, Stephen J.; Hoffman, James P.; Perkovic-Martin, Dragana; Shaffer, Scott; Thrivikraman, Tushar; Yates, Phil; Veilleux, Louise

2012-01-01

The SweepSAR architecture for space-borne remote sensing applications is an enabling technology for reducing the temporal baseline of repeat-pass interferometers while maintaining near-global coverage. As part of this architecture, real-time digital beam-forming would be performed on the radar return signals across multiple channels. Preserving the accuracy of the combined return data requires real-time calibration of the transmit and receive RF paths on each channel. This paper covers several of the design considerations necessary to produce a practical implementation of this concept.

32 CFR Enclosure 2 to Part 187 - Requirements for Environmental Considerations-Foreign Nations and Protected Global Resources

Code of Federal Regulations, 2014 CFR

2014-07-01

... evaluate requirements with respect to the environment; d. Ensure consideration of: (1) Requirements of... other similar broad-guage descriptive factors; b. Identification of the important environmental issues... in its internal affairs and its prerogative to evaluate requirements with respect to the environment...

32 CFR Enclosure 2 to Part 187 - Requirements for Environmental Considerations-Foreign Nations and Protected Global Resources

Code of Federal Regulations, 2013 CFR

2013-07-01

... evaluate requirements with respect to the environment; d. Ensure consideration of: (1) Requirements of... other similar broad-guage descriptive factors; b. Identification of the important environmental issues... in its internal affairs and its prerogative to evaluate requirements with respect to the environment...

Examination of Work Environment Factors Relating to Burnout Syndrome of Early Childhood Educators in Greece

ERIC Educational Resources Information Center

Rentzou, Konstantina

2012-01-01

Early childhood education is a profession which requires the professional staff to spend considerable time in intense involvement with other people. The pressure from the demands this profession has can create a sense of physical and emotional exhaustion that often leads to burnout. Thus, previous research has linked perceptions of the work…

Compendium of Abstracts. Volume 2

DTIC Science & Technology

2010-08-01

researched for various applications such as self - healing and fluid transport. One method of creating these vascular systems is through a process called...Daniel J. Dexterous robotic manipulators that rely on joystick type interfaces for teleoperation require considerable time and effort to master...and lack an intuitive basis for human- robot interaction. This hampers operator performance, increases cognitive workload, and limits overall

A Conceptual Framework for Detecting Cheating in Online and Take-Home Exams

ERIC Educational Resources Information Center

D'Souza, Kelwyn A.; Siegfeldt, Denise V.

2017-01-01

Selecting the right methodology to use for detecting cheating in online exams requires considerable time and effort due to a wide variety of scholarly publications on academic dishonesty in online education. This article offers a cheating detection framework that can serve as a guideline for conducting cheating studies. The necessary theories and…

Elaboration and Organization Strategies Used by Prospective Class Teachers While Studying Social Studies Education Textbooks

ERIC Educational Resources Information Center

Tay, Bayram

2013-01-01

Problem Statement: Students spend a considerable amount of their time studying from textbooks, which play an important role in their learning activities. The strategies students use to learn work as guides, requiring them to mentally process, make sense of and internalize information offered to them during the instructional process. Of these,…

Planning a Computer Lab: Considerations To Ensure Success.

ERIC Educational Resources Information Center

IALL Journal of Language Learning Technologies, 1994

1994-01-01

Presents points to consider when organizing a computer laboratory. These include the lab's overall objectives and how best to meet them; what type of students will use the lab; where the lab will be located; and what software and hardware can best meet the lab's overall objectives, population, and location requirements. Other factors include time,…

Predicting forest attributes from climate data using a recursive partitioning and regression tree algorithm

Treesearch

Greg C. Liknes; Christopher W. Woodall; Charles H. Perry

2009-01-01

Climate information frequently is included in geospatial modeling efforts to improve the predictive capability of other data sources. The selection of an appropriate climate data source requires consideration given the number of choices available. With regard to climate data, there are a variety of parameters (e.g., temperature, humidity, precipitation), time intervals...

Real-time alerts and reminders using information systems.

PubMed

Wanderer, Jonathan P; Sandberg, Warren S; Ehrenfeld, Jesse M

2011-09-01

Adoption of information systems throughout the hospital environment has enabled the development of real-time physiologic alerts and clinician reminder systems. These clinical tools can be made available through the deployment of anesthesia information management systems (AIMS). Creating usable alert systems requires understanding of technical considerations. Various successful implementations are reviewed, encompassing cost reduction, improved revenue capture, timely antibiotic administration, and postoperative nausea and vomiting prophylaxis. Challenges to the widespread use of real-time alerts and reminders include AIMS adoption rates and the difficulty in choosing appropriate areas and approaches for information systems support. Copyright © 2011 Elsevier Inc. All rights reserved.

Requirements for Modeling and Simulation for Space Medicine Operations: Preliminary Considerations

NASA Technical Reports Server (NTRS)

Dawson, David L.; Billica, Roger D.; Logan, James; McDonald, P. Vernon

2001-01-01

The NASA Space Medicine program is now developing plans for more extensive use of high-fidelity medical Simulation systems. The use of simulation is seen as means to more effectively use the limited time available for astronaut medical training. Training systems should be adaptable for use in a variety of training environments, including classrooms or laboratories, space vehicle mockups, analog environments, and in microgravity. Modeling and simulation can also provide the space medicine development program a mechanism for evaluation of other medical technologies under operationally realistic conditions. Systems and procedures need preflight verification with ground-based testing. Traditionally, component testing has been accomplished, but practical means for "human in the loop" verification of patient care systems have been lacking. Medical modeling and simulation technology offer potential means to accomplish such validation work. Initial considerations in the development of functional requirements and design standards for simulation systems for space medicine are discussed.

Laser power beaming applications and technology

NASA Astrophysics Data System (ADS)

Burke, Robert J.; Cover, Ralph A.; Curtin, Mark S.; Dinius, R.; Lampel, Michael C.

1994-05-01

Beaming laser energy to spacecraft has important economic potential. It promises significant reduction in the cost of access to space, for commercial and government missions. While the potential payoff is attractive, existing technologies perform the same missions and the keys to market penetration for power beaming are a competitive cost and a schedule consistent with customers' plans. Rocketdyne is considering these questions in the context of a commercial enterprise -- thus, evaluation of the requirements must be done based on market assessments and recognition that significant private funding will be involved. It is in the context of top level business considerations that the technology requirements are being assessed and the program being designed. These considerations result in the essential elements of the development program. Since the free electron laser is regarded as the `long pole in the tent,' this paper summarizes Rocketdyne's approach for a timely, cost-effective program to demonstrate an FEL capable of supporting an initial operating capability.

Fast algorithms for Quadrature by Expansion I: Globally valid expansions

NASA Astrophysics Data System (ADS)

Rachh, Manas; Klöckner, Andreas; O'Neil, Michael

2017-09-01

The use of integral equation methods for the efficient numerical solution of PDE boundary value problems requires two main tools: quadrature rules for the evaluation of layer potential integral operators with singular kernels, and fast algorithms for solving the resulting dense linear systems. Classically, these tools were developed separately. In this work, we present a unified numerical scheme based on coupling Quadrature by Expansion, a recent quadrature method, to a customized Fast Multipole Method (FMM) for the Helmholtz equation in two dimensions. The method allows the evaluation of layer potentials in linear-time complexity, anywhere in space, with a uniform, user-chosen level of accuracy as a black-box computational method. Providing this capability requires geometric and algorithmic considerations beyond the needs of standard FMMs as well as careful consideration of the accuracy of multipole translations. We illustrate the speed and accuracy of our method with various numerical examples.

Design factors and considerations for a time-based flight management system

NASA Technical Reports Server (NTRS)

Vicroy, D. D.; Williams, D. H.; Sorensen, J. A.

1986-01-01

Recent NASA Langley Research Center research to develop a technology data base from which an advanced Flight Management System (FMS) design might evolve is reviewed. In particular, the generation of fixed range cruise/descent reference trajectories which meet predefined end conditions of altitude, speed, and time is addressed. Results on the design and theoretical basis of the trajectory generation algorithm are presented, followed by a brief discussion of a series of studies that are being conducted to determine the accuracy requirements of the aircraft and weather models resident in the trajectory generation algorithm. Finally, studies to investigate the interface requirements between the pilot and an advanced FMS are considered.

Spectrum analysis on quality requirements consideration in software design documents.

PubMed

Kaiya, Haruhiko; Umemura, Masahiro; Ogata, Shinpei; Kaijiri, Kenji

2013-12-01

Software quality requirements defined in the requirements analysis stage should be implemented in the final products, such as source codes and system deployment. To guarantee this meta-requirement, quality requirements should be considered in the intermediate stages, such as the design stage or the architectural definition stage. We propose a novel method for checking whether quality requirements are considered in the design stage. In this method, a technique called "spectrum analysis for quality requirements" is applied not only to requirements specifications but also to design documents. The technique enables us to derive the spectrum of a document, and quality requirements considerations in the document are numerically represented in the spectrum. We can thus objectively identify whether the considerations of quality requirements in a requirements document are adapted to its design document. To validate the method, we applied it to commercial software systems with the help of a supporting tool, and we confirmed that the method worked well.

Apollo/Saturn 5 space vehicle countdown. Volume 2: Turnaround from scrub

NASA Technical Reports Server (NTRS)

1972-01-01

The procedures required to prepare a space vehicle for subsequent launch attempt after cancelling lift-off activities are presented. The cancellation must occur after the start of cryogenic loading, but prior to initiation of ignition sequences. The sequence of operations necessary to return the space vehicle to a predetermined configuration at which time the launch count can be resumed or rescheduled for following launch opportunities is developed. The considerations and constraints that are the basis for the scrub/turnaround times are described.

System considerations, projected requirements and applications for aeronautical mobile satellite communications for air traffic services

NASA Technical Reports Server (NTRS)

Mcdonald, K. D.; Miller, C. M.; Scales, W. C.; Dement, D. K.

1990-01-01

The projected application and requirements in the near term (to 1995) and far term (to 2010) for aeronautical mobile services supporting air traffic control operations are addressed. The implications of these requirements on spectrum needs, and the resulting effects on the satellite design and operation are discussed. The U.S. is working with international standards and regulatory organizations to develop the necessary aviation standards, signalling protocols, and implementation methods. In the provision of aeronautical safety services, a number of critical issues were identified, including system reliability and availability, access time, channel restoration time, interoperability, pre-emption techniques, and the system network interfaces. Means for accomplishing these critical services in the aeronautical mobile satellite service (AMSS), and the various activities relating to the future provision of aeronautical safety services are addressed.

System considerations, projected requirements and applications for aeronautical mobile satellite communications for air traffic services

NASA Astrophysics Data System (ADS)

McDonald, K. D.; Miller, C. M.; Scales, W. C.; Dement, D. K.

The projected application and requirements in the near term (to 1995) and far term (to 2010) for aeronautical mobile services supporting air traffic control operations are addressed. The implications of these requirements on spectrum needs, and the resulting effects on the satellite design and operation are discussed. The U.S. is working with international standards and regulatory organizations to develop the necessary aviation standards, signalling protocols, and implementation methods. In the provision of aeronautical safety services, a number of critical issues were identified, including system reliability and availability, access time, channel restoration time, interoperability, pre-emption techniques, and the system network interfaces. Means for accomplishing these critical services in the aeronautical mobile satellite service (AMSS), and the various activities relating to the future provision of aeronautical safety services are addressed.

Technology developments under consideration for future ground systems

NASA Astrophysics Data System (ADS)

Drewes, G. W. J.

A review is conducted of those areas of ground-system related technology which require for their appropriate development funding provided by ESA. ESA will, in this connection, financially support the development of a coaxial S and X band feed horn for use with its 15-m antenna for Villafranca and Carnarvon. With respect to RF techology, it is found that the required RF components and subsystems will be available, and, consequently, ESA will not provide any funds for developments in this area. Other sectors examined with respect to possible developments requiring ESA funding are related to modulation/demodulation, spacecraft position, data handling, timing, and development and standardization.

Applications and requirements for real-time simulators in ground-test facilities

NASA Technical Reports Server (NTRS)

Arpasi, Dale J.; Blech, Richard A.

1986-01-01

This report relates simulator functions and capabilities to the operation of ground test facilities, in general. The potential benefits of having a simulator are described to aid in the selection of desired applications for a specific facility. Configuration options for integrating a simulator into the facility control system are discussed, and a logical approach to configuration selection based on desired applications is presented. The functional and data path requirements to support selected applications and configurations are defined. Finally, practical considerations for implementation (i.e., available hardware and costs) are discussed.

Aerodynamics of a Cycling Team in a Time Trial: Does the Cyclist at the Front Benefit?

ERIC Educational Resources Information Center

Iniguez-de-la Torre, A.; Iniguez, J.

2009-01-01

When seasonal journeys take place in nature, birds and fishes migrate in groups. This provides them not only with security but also a considerable saving of energy. The power they need to travel requires overcoming aerodynamic or hydrodynamic drag forces, which can be substantially reduced when the group travels in an optimal arrangement. Also in…

Multicore Considerations for Legacy Flight Software Migration

NASA Technical Reports Server (NTRS)

Vines, Kenneth; Day, Len

2013-01-01

In this paper we will discuss potential benefits and pitfalls when considering a migration from an existing single core code base to a multicore processor implementation. The results of this study present options that should be considered before migrating fault managers, device handlers and tasks with time-constrained requirements to a multicore flight software environment. Possible future multicore test bed demonstrations are also discussed.

A bill to require that all legislative matters be available and fully scored by CBO 72 hours before consideration by any subcommittee or committee of the Senate or on the floor of the Senate.

THOMAS, 111th Congress

Sen. Bunning, Jim [R-KY

2009-10-08

Senate - 10/13/2009 Read the second time. Placed on Senate Legislative Calendar under General Orders. Calendar No. 176. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

SOLVE II: A Technique to Improve Efficiency and Solve Problems in Hardwood Sawmills

Treesearch

Edward L. Adams; Daniel E. Dunmire

1977-01-01

The squeeze between rising costs and product values is getting tighter for sawmill managers. So, they are taking a closer took at the efficiency of their sawmills by making a complete analysis of their milling situation. Such an analysis requires considerable time and expense. To aid the manager with this task, the USDA Forest Service's Northeastern Forest...

Implementation of an Electronic Objective Structured Clinical Exam for Assessing Practical Skills in Pre-Professional Physiotherapy and Occupational Therapy Programs: Examiner and Course Coordinator Perspectives

ERIC Educational Resources Information Center

Snodgrass, Suzanne J.; Ashby, Samantha E.; Rivett, Darren A.; Russell, Trevor

2014-01-01

Assessment of practical clinical skills is essential in the health fields. Objective Structured Clinical Exams (OSCEs), where examiners assess students performing clinical procedures on simulated patients (actors), are central to the evaluation of practical skills. However, traditional OSCEs require considerable time-investment to administer, and…

Developing and Implementing an Accreditation Scheme for Disability Services Staff in Post-Compulsory Education in the United Kingdom

ERIC Educational Resources Information Center

Hurst, Alan

2015-01-01

In the United Kingdom (UK), policy and provision for students with disabilities in post-compulsory education has made considerable progress in a relatively short time. This growth has been aided by several factors, arguably the most significant being the introduction of legal requirements in 1995. Many institutions and organisations have tried to…

Enabling fast charging - Vehicle considerations

NASA Astrophysics Data System (ADS)

Meintz, Andrew; Zhang, Jiucai; Vijayagopal, Ram; Kreutzer, Cory; Ahmed, Shabbir; Bloom, Ira; Burnham, Andrew; Carlson, Richard B.; Dias, Fernando; Dufek, Eric J.; Francfort, James; Hardy, Keith; Jansen, Andrew N.; Keyser, Matthew; Markel, Anthony; Michelbacher, Christopher; Mohanpurkar, Manish; Pesaran, Ahmad; Scoffield, Don; Shirk, Matthew; Stephens, Thomas; Tanim, Tanvir

2017-11-01

To achieve a successful increase in the plug-in battery electric vehicle (BEV) market, it is anticipated that a significant improvement in battery performance is required to increase the range that BEVs can travel and the rate at which they can be recharged. While the range that BEVs can travel on a single recharge is improving, the recharge rate is still much slower than the refueling rate of conventional internal combustion engine vehicles. To achieve comparable recharge times, we explore the vehicle considerations of charge rates of at least 400 kW. Faster recharge is expected to significantly mitigate the perceived deficiencies for long-distance transportation, to provide alternative charging in densely populated areas where overnight charging at home may not be possible, and to reduce range anxiety for travel within a city when unplanned charging may be required. This substantial increase in charging rate is expected to create technical issues in the design of the battery system and the vehicle's electrical architecture that must be resolved. This work focuses on vehicle system design and total recharge time to meet the goals of implementing improved charge rates and the impacts of these expected increases on system voltage and vehicle components.

Acoustic Source Localization via Time Difference of Arrival Estimation for Distributed Sensor Networks Using Tera-Scale Optical Core Devices

DOE PAGES

Imam, Neena; Barhen, Jacob

2009-01-01

For real-time acoustic source localization applications, one of the primary challenges is the considerable growth in computational complexity associated with the emergence of ever larger, active or passive, distributed sensor networks. These sensors rely heavily on battery-operated system components to achieve highly functional automation in signal and information processing. In order to keep communication requirements minimal, it is desirable to perform as much processing on the receiver platforms as possible. However, the complexity of the calculations needed to achieve accurate source localization increases dramatically with the size of sensor arrays, resulting in substantial growth of computational requirements that cannot bemore » readily met with standard hardware. One option to meet this challenge builds upon the emergence of digital optical-core devices. The objective of this work was to explore the implementation of key building block algorithms used in underwater source localization on the optical-core digital processing platform recently introduced by Lenslet Inc. This demonstration of considerably faster signal processing capability should be of substantial significance to the design and innovation of future generations of distributed sensor networks.« less

Enabling fast charging – Vehicle considerations

DOE PAGES

Meintz, Andrew; Zhang, Jiucai; Vijayagopal, Ram; ...

2017-11-01

To achieve a successful increase in the plug-in battery electric vehicle (BEV) market it is anticipated that a significant improvement in battery performance is required to improve the range that BEVs can travel. While the range that BEVs can travel on a single recharge is improving, the rate at which these vehicles can be recharged is still much slower than conventional internal combustion engine vehicles. To achieve comparable recharge times we explore the vehicle considerations of charge rates up to 350 kW. This faster recharge is expected to significantly mitigate the perceived deficiencies for long-distance transportation, to provide alternative chargingmore » in densely populated areas where overnight charging at home may not be possible, and to reduce range anxiety for travel within a city when unplanned charging maybe required. This substantial increase in the charging rate is expected to create technical issues in the design of the battery system and the vehicle electrical architecture that must be resolved. This work will focus on the battery system thermal design and total recharge time to meet the goals of implementing higher charge rates as well as the impacts of the expected increase in system voltage on the components of the vehicle.« less

Enabling fast charging – Vehicle considerations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meintz, Andrew; Zhang, Jiucai; Vijayagopal, Ram

To achieve a successful increase in the plug-in battery electric vehicle (BEV) market it is anticipated that a significant improvement in battery performance is required to improve the range that BEVs can travel. While the range that BEVs can travel on a single recharge is improving, the rate at which these vehicles can be recharged is still much slower than conventional internal combustion engine vehicles. To achieve comparable recharge times we explore the vehicle considerations of charge rates up to 350 kW. This faster recharge is expected to significantly mitigate the perceived deficiencies for long-distance transportation, to provide alternative chargingmore » in densely populated areas where overnight charging at home may not be possible, and to reduce range anxiety for travel within a city when unplanned charging maybe required. This substantial increase in the charging rate is expected to create technical issues in the design of the battery system and the vehicle electrical architecture that must be resolved. This work will focus on the battery system thermal design and total recharge time to meet the goals of implementing higher charge rates as well as the impacts of the expected increase in system voltage on the components of the vehicle.« less

Airborne Laser Remote Sensor for Oil Detection and Classification : Engineering Requirements and Technical Considerations Relevant to a Performance Specification

DOT National Transportation Integrated Search

1975-08-01

This report outlines the engineering requirements for an Airborne Laser Remote Sensor for Oil Detection and Classification System. Detailed engineering requirements are given for the major units of the system. Technical considerations pertinent to a ...

21 CFR 25.20 - Actions requiring preparation of an environmental assessment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Actions requiring preparation of an environmental assessment. 25.20 Section 25.20 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ENVIRONMENTAL IMPACT CONSIDERATIONS Agency Actions Requiring Environmental Consideration...

Mobile and Wireless Technologies in Health Behavior and the Potential for Intensively Adaptive Interventions.

PubMed

Riley, William T; Serrano, Katrina J; Nilsen, Wendy; Atienza, Audie A

2015-10-01

Recent advances in mobile and wireless technologies have made real-time assessments of health behaviors and their influences possible with minimal respondent burden. These tech-enabled real-time assessments provide the basis for intensively adaptive interventions (IAIs). Evidence of such studies that adjust interventions based on real-time inputs is beginning to emerge. Although IAIs are promising, the development of intensively adaptive algorithms generate new research questions, and the intensive longitudinal data produced by IAIs require new methodologies and analytic approaches. Research considerations and future directions for IAIs in health behavior research are provided.

[Preparation and administration of cytotoxic drugs: prickly innovation].

PubMed

Mullot, H; Simon, L; Payen, C; Gentes, P

2005-06-01

The requirement for safe and optimal administration of cytotoxic drugs led us to test a new product manufactured by Codan. The transfer set (CONNECT SET) and the administration set (CYTO-AD-SET) were assessed successively by pharmacist assistance within a centralized unit for cytotoxic drug preparation and by the nursing staff in an ambulatory unit. Transfer sets can be handled in the centralized units without using needles, but with an increased sterilization load and production cost. Assessment of the administration sets demonstrated time saving for the nursing staff. These materials require significant expenditures, careful training, and a change in treatment routine, but provide important time savings for the nursing staff and considerable improvement in the safety of handling cytotoxic drugs.

Fluctuations in energy loss and their implications for dosimetry and radiobiology

NASA Technical Reports Server (NTRS)

Baily, N. A.; Steigerwalt, J. E.

1972-01-01

Serious consideration of the physics of energy deposition indicates that a fundamental change in the interpretation of absorbed dose is required at least for considerations of effects in biological systems. In addition, theoretical approaches to radiobiology and microdosimetry seem to require statistical considerations incorporating frequency distributions of the magnitude of the event sizes within the volume of interest.

Nature or petrochemistry?-biologically degradable materials.

PubMed

Mecking, Stefan

2004-02-20

Naturally occurring polymers have been utilized for a long time as materials, however, their application as plastics has been restricted because of their limited thermoplastic processability. Recently, the microbial synthesis of polyesters directly from carbohydrate sources has attracted considerable attention. The industrial-scale production of poly(lactic acid) from lactic acid generated by fermentation now provides a renewable resources-based polyester as a commodity plastic for the first time. The biodegradability of a given material is independent of its origin, and biodegradable plastics can equally well be prepared from fossil fuel feedstocks. A consideration of the overall carbon dioxide emissions and consumption of non-renewable resources over the entire life-cycle of a product is not necessarily favorable for plastics based on renewable resources with current technology-in addition to the feedstocks for the synthesis of the polymer materials, the feedstock for generation of the overall energy required for production and processing is decisive.

Functional Fault Modeling of a Cryogenic System for Real-Time Fault Detection and Isolation

NASA Technical Reports Server (NTRS)

Ferrell, Bob; Lewis, Mark; Oostdyk, Rebecca; Perotti, Jose

2009-01-01

When setting out to model and/or simulate a complex mechanical or electrical system, a modeler is faced with a vast array of tools, software, equations, algorithms and techniques that may individually or in concert aid in the development of the model. Mature requirements and a well understood purpose for the model may considerably shrink the field of possible tools and algorithms that will suit the modeling solution. Is the model intended to be used in an offline fashion or in real-time? On what platform does it need to execute? How long will the model be allowed to run before it outputs the desired parameters? What resolution is desired? Do the parameters need to be qualitative or quantitative? Is it more important to capture the physics or the function of the system in the model? Does the model need to produce simulated data? All these questions and more will drive the selection of the appropriate tools and algorithms, but the modeler must be diligent to bear in mind the final application throughout the modeling process to ensure the model meets its requirements without needless iterations of the design. The purpose of this paper is to describe the considerations and techniques used in the process of creating a functional fault model of a liquid hydrogen (LH2) system that will be used in a real-time environment to automatically detect and isolate failures.

Considerations for an exercise prescription

NASA Technical Reports Server (NTRS)

Convertino, Victor A.

1989-01-01

A number of past and most recent research findings that describe some of the physiological responses to exercise in man and their relationship with exposure to various gravitational environments are discussed. Most of the data pertain to adaptations of the cardiovascular and body fluid systems. It should be kept in mind that the data from studies on microgravity simulation in man include exposures of relatively short duration (5 hours to 14 days). However, it is argued that the results may provide important guidelines for the consideration of many variables which are pertinent to the development of exercise prescription for long-duration space flight. The following considerations for exercise prescriptions during long-duration space flight are noted: (1) Relatively high aerobic fitness and strength, especially of the upper body musculature, should be a criterion for selection of astronauts who will be involved in EVA, since endurance and strength appear to be predominant characteristics for work performance. (2) Some degree of upper body strength will probably be required for effective performance of EVA. However, the endurance and strength required by the upper body for EVA can probably be obtained through preflight exercise prescription which involves swimming. (3) Although some degree of arm exercise may be required to maintain preflight endurance and strength, researchers propose that regular EVA will probably be sufficient to maintain the endurance and strength required to effectively perform work tasks during space flight. (4) A minimum of one maximal aerobic exercise every 7 to 10 days during space flight may be all that is necessary for maintenance of normal cardiovascular responsiveness and replacement of body fluids for reentry following prolonged space flight. (5) The possible reduction in the amount of exercise required for maintenance of cardiovascular system and body fluids in combination with the use of electromyostimulation (EMS) or methods other than conventional exercise for maintaining size and strength of muscles and bones needs great consideration for further research. These approaches represent a potential solution to the problem of compromising valuable time for exercise that is needed for daily operations.

Data inversion algorithm development for the hologen occultation experiment

NASA Technical Reports Server (NTRS)

Gordley, Larry L.; Mlynczak, Martin G.

1986-01-01

The successful retrieval of atmospheric parameters from radiometric measurement requires not only the ability to do ideal radiometric calculations, but also a detailed understanding of instrument characteristics. Therefore a considerable amount of time was spent in instrument characterization in the form of test data analysis and mathematical formulation. Analyses of solar-to-reference interference (electrical cross-talk), detector nonuniformity, instrument balance error, electronic filter time-constants and noise character were conducted. A second area of effort was the development of techniques for the ideal radiometric calculations required for the Halogen Occultation Experiment (HALOE) data reduction. The computer code for these calculations must be extremely complex and fast. A scheme for meeting these requirements was defined and the algorithms needed form implementation are currently under development. A third area of work included consulting on the implementation of the Emissivity Growth Approximation (EGA) method of absorption calculation into a HALOE broadband radiometer channel retrieval algorithm.

Real-time automated failure identification in the Control Center Complex (CCC)

NASA Technical Reports Server (NTRS)

Kirby, Sarah; Lauritsen, Janet; Pack, Ginger; Ha, Anhhoang; Jowers, Steven; Mcnenny, Robert; Truong, The; Dell, James

1993-01-01

A system which will provide real-time failure management support to the Space Station Freedom program is described. The system's use of a simplified form of model based reasoning qualifies it as an advanced automation system. However, it differs from most such systems in that it was designed from the outset to meet two sets of requirements. First, it must provide a useful increment to the fault management capabilities of the Johnson Space Center (JSC) Control Center Complex (CCC) Fault Detection Management system. Second, it must satisfy CCC operational environment constraints such as cost, computer resource requirements, verification, and validation, etc. The need to meet both requirement sets presents a much greater design challenge than would have been the case had functionality been the sole design consideration. The choice of technology, discussing aspects of that choice and the process for migrating it into the control center is overviewed.

Space Transportation System Availability Requirements and Its Influencing Attributes Relationships

NASA Technical Reports Server (NTRS)

Rhodes, Russel E.; Adams, TImothy C.

2008-01-01

It is essential that management and engineering understand the need for an availability requirement for the customer's space transportation system as it enables the meeting of his needs, goal, and objectives. There are three types of availability, e.g., operational availability, achieved availability, or inherent availability. The basic definition of availability is equal to the mean uptime divided by the sum of the mean uptime plus the mean downtime. The major difference is the inclusiveness of the functions within the mean downtime and the mean uptime. This paper will address tIe inherent availability which only addresses the mean downtime as that mean time to repair or the time to determine the failed article, remove it, install a replacement article and verify the functionality of the repaired system. The definitions of operational availability include the replacement hardware supply or maintenance delays and other non-design factors in the mean downtime. Also with inherent availability the mean uptime will only consider the mean time between failures (other availability definitions consider this as mean time between maintenance - preventive and corrective maintenance) that requires the repair of the system to be functional. It is also essential that management and engineering understand all influencing attributes relationships to each other and to the resultant inherent availability requirement. This visibility will provide the decision makers with the understanding necessary to place constraints on the design definition for the major drivers that will determine the inherent availability, safety, reliability, maintainability, and the life cycle cost of the fielded system provided the customer. This inherent availability requirement may be driven by the need to use a multiple launch approach to placing humans on the moon or the desire to control the number of spare parts required to support long stays in either orbit or on the surface of the moon or mars. It is the intent of this paper to provide the visibility of relationships of these major attribute drivers (variables) to each other and the resultant system inherent availability, but also provide the capability to bound the variables providing engineering the insight required to control the system's engineering solution. An example of this visibility will be the need to provide integration of similar discipline functions to allow control of the total parts count of the space transportation system. Also the relationship visibility of selecting a reliability requirement will place a constraint on parts count to achieve a given inherent availability requirement or accepting a larger parts count with the resulting higher reliability requirement. This paper will provide an understanding for the relationship of mean repair time (mean downtime) to maintainability, e.g., accessibility for repair, and both mean time between failure, e.g., reliability of hardware and the system inherent availability. Having an understanding of these relationships and resulting requirements before starting the architectural design concept definition will avoid considerable time and money required to iterate the design to meet the redesign and assessment process required to achieve the results required of the customer's space transportation system. In fact the impact to the schedule to being able to deliver the system that meets the customer's needs, goals, and objectives may cause the customer to compromise his desired operational goal and objectives resulting in considerable increased life cycle cost of the fielded space transportation system.

PCI: A PATRAN-NASTRAN model translator

NASA Technical Reports Server (NTRS)

Sheerer, T. J.

1990-01-01

The amount of programming required to develop a PATRAN-NASTRAN translator was surprisingly small. The approach taken produced a highly flexible translator comparable with the PATNAS translator and superior to the PATCOS translator. The coding required varied from around ten lines for a shell element to around thirty for a bar element, and the time required to add a feature to the program is typically less than an hour. The use of a lookup table for element names makes the translator also applicable to other versions of NASTRAN. The saving in time as a result of using PDA's Gateway utilities was considerable. During the writing of the program it became apparent that, with a somewhat more complex structure, it would be possible to extend the element data file to contain all data required to define the translation from PATRAN to NASTRAN by mapping of data between formats. Similar data files on property, material and grid formats would produce a completely universal translator from PATRAN to any FEA program, or indeed any CAE system.

Transfer Students: Postsecondary Institutions Could Promote More Consistent Consideration of Coursework by Not Basing Determinations on Accreditation. Report to Congressional Requesters. GAO-06-22

ERIC Educational Resources Information Center

Ashby, Cornelia M.

2005-01-01

Each year thousands of students transfer from one postsecondary institution to another. The credit transfer process, to the extent that it delays students' progress, can affect the affordability of postsecondary education and the time it takes students to graduate. Seeking information on the processes and requirements that postsecondary…

Management Information System

NASA Technical Reports Server (NTRS)

1984-01-01

New Automated Management Information Center (AMIC) employs innovative microcomputer techniques to create color charts, viewgraphs, or other data displays in a fraction of the time formerly required. Developed under Kennedy Space Center's contract by Boeing Services International Inc., Seattle, WA, AMIC can produce an entirely new informational chart in 30 minutes, or an updated chart in only five minutes. AMIC also has considerable potential as a management system for business firms.

Investigation of the diaphragm-type pressure cell

NASA Technical Reports Server (NTRS)

Theodorsen, Theodore

1932-01-01

This report relates to various improvements in the process of manufacture of the NACA standard pressure cell. Like most pressure recording devices employing thin diaphragms, they would in general show considerable change in calibration with temperature and also some change of calibration with time or aging effect. The required diaphragm thickness and the desirable rate of mechanical magnification have been determined on the basis of several hundred tests.

Distributed simulation using a real-time shared memory network

NASA Technical Reports Server (NTRS)

Simon, Donald L.; Mattern, Duane L.; Wong, Edmond; Musgrave, Jeffrey L.

1993-01-01

The Advanced Control Technology Branch of the NASA Lewis Research Center performs research in the area of advanced digital controls for aeronautic and space propulsion systems. This work requires the real-time implementation of both control software and complex dynamical models of the propulsion system. We are implementing these systems in a distributed, multi-vendor computer environment. Therefore, a need exists for real-time communication and synchronization between the distributed multi-vendor computers. A shared memory network is a potential solution which offers several advantages over other real-time communication approaches. A candidate shared memory network was tested for basic performance. The shared memory network was then used to implement a distributed simulation of a ramjet engine. The accuracy and execution time of the distributed simulation was measured and compared to the performance of the non-partitioned simulation. The ease of partitioning the simulation, the minimal time required to develop for communication between the processors and the resulting execution time all indicate that the shared memory network is a real-time communication technique worthy of serious consideration.

Heterogeneous computing architecture for fast detection of SNP-SNP interactions.

PubMed

Sluga, Davor; Curk, Tomaz; Zupan, Blaz; Lotric, Uros

2014-06-25

The extent of data in a typical genome-wide association study (GWAS) poses considerable computational challenges to software tools for gene-gene interaction discovery. Exhaustive evaluation of all interactions among hundreds of thousands to millions of single nucleotide polymorphisms (SNPs) may require weeks or even months of computation. Massively parallel hardware within a modern Graphic Processing Unit (GPU) and Many Integrated Core (MIC) coprocessors can shorten the run time considerably. While the utility of GPU-based implementations in bioinformatics has been well studied, MIC architecture has been introduced only recently and may provide a number of comparative advantages that have yet to be explored and tested. We have developed a heterogeneous, GPU and Intel MIC-accelerated software module for SNP-SNP interaction discovery to replace the previously single-threaded computational core in the interactive web-based data exploration program SNPsyn. We report on differences between these two modern massively parallel architectures and their software environments. Their utility resulted in an order of magnitude shorter execution times when compared to the single-threaded CPU implementation. GPU implementation on a single Nvidia Tesla K20 runs twice as fast as that for the MIC architecture-based Xeon Phi P5110 coprocessor, but also requires considerably more programming effort. General purpose GPUs are a mature platform with large amounts of computing power capable of tackling inherently parallel problems, but can prove demanding for the programmer. On the other hand the new MIC architecture, albeit lacking in performance reduces the programming effort and makes it up with a more general architecture suitable for a wider range of problems.

Heterogeneous computing architecture for fast detection of SNP-SNP interactions

PubMed Central

2014-01-01

Background The extent of data in a typical genome-wide association study (GWAS) poses considerable computational challenges to software tools for gene-gene interaction discovery. Exhaustive evaluation of all interactions among hundreds of thousands to millions of single nucleotide polymorphisms (SNPs) may require weeks or even months of computation. Massively parallel hardware within a modern Graphic Processing Unit (GPU) and Many Integrated Core (MIC) coprocessors can shorten the run time considerably. While the utility of GPU-based implementations in bioinformatics has been well studied, MIC architecture has been introduced only recently and may provide a number of comparative advantages that have yet to be explored and tested. Results We have developed a heterogeneous, GPU and Intel MIC-accelerated software module for SNP-SNP interaction discovery to replace the previously single-threaded computational core in the interactive web-based data exploration program SNPsyn. We report on differences between these two modern massively parallel architectures and their software environments. Their utility resulted in an order of magnitude shorter execution times when compared to the single-threaded CPU implementation. GPU implementation on a single Nvidia Tesla K20 runs twice as fast as that for the MIC architecture-based Xeon Phi P5110 coprocessor, but also requires considerably more programming effort. Conclusions General purpose GPUs are a mature platform with large amounts of computing power capable of tackling inherently parallel problems, but can prove demanding for the programmer. On the other hand the new MIC architecture, albeit lacking in performance reduces the programming effort and makes it up with a more general architecture suitable for a wider range of problems. PMID:24964802

Review of methods for measuring β-cell function: Design considerations from the Restoring Insulin Secretion (RISE) Consortium.

PubMed

Hannon, Tamara S; Kahn, Steven E; Utzschneider, Kristina M; Buchanan, Thomas A; Nadeau, Kristen J; Zeitler, Philip S; Ehrmann, David A; Arslanian, Silva A; Caprio, Sonia; Edelstein, Sharon L; Savage, Peter J; Mather, Kieren J

2018-01-01

The Restoring Insulin Secretion (RISE) study was initiated to evaluate interventions to slow or reverse the progression of β-cell failure in type 2 diabetes (T2D). To design the RISE study, we undertook an evaluation of methods for measurement of β-cell function and changes in β-cell function in response to interventions. In the present paper, we review approaches for measurement of β-cell function, focusing on methodologic and feasibility considerations. Methodologic considerations included: (1) the utility of each technique for evaluating key aspects of β-cell function (first- and second-phase insulin secretion, maximum insulin secretion, glucose sensitivity, incretin effects) and (2) tactics for incorporating a measurement of insulin sensitivity in order to adjust insulin secretion measures for insulin sensitivity appropriately. Of particular concern were the capacity to measure β-cell function accurately in those with poor function, as is seen in established T2D, and the capacity of each method for demonstrating treatment-induced changes in β-cell function. Feasibility considerations included: staff burden, including time and required methodological expertise; participant burden, including time and number of study visits; and ease of standardizing methods across a multicentre consortium. After this evaluation, we selected a 2-day measurement procedure, combining a 3-hour 75-g oral glucose tolerance test and a 2-stage hyperglycaemic clamp procedure, augmented with arginine. © 2017 John Wiley & Sons Ltd.

Considerations for the Next Revision of STRS

NASA Technical Reports Server (NTRS)

Johnson, Sandra K.; Handler, Louis M.; Briones, Janette C.

2016-01-01

Development of NASAs Software Defined Radio architecture, the Space Telecommunication Radio System (STRS), was initiated in 2004 with a goal of reducing the cost, risk and schedule when implementing Software Defined Radios (SDR) for NASA space missions. Since STRS was first flown in 2012 on three Software Defined Radios on the Space Communication and Navigation (SCaN) Testbed, only minor changes have been made to the architecture. Multiple entities have since implemented the architecture and have provided significant feedback for consideration for the next revision of the standard. The focus for the first set of updates to the architecture is items that enhance application portability. Items that require modifications to existing applications before migrating to the updated architecture will only be considered if there is compelling reasons to make the change. The significant suggestions that were further evaluated for consideration include expanding and clarifying the timing Application Programming Interfaces (APIs), improving handle name and identification (ID) definitions and use, and multiple items related to implementation of STRS Devices. In addition to ideas suggested while implementing STRS, SDR technology has evolved significantly and this impact to the architecture needs to be considered. These include incorporating cognitive concepts - learning from past decisions and making new decisions that the radio can act upon. SDRs are also being developed that do not contain a General Purpose Module which is currently required for the platform to be STRS compliant. The purpose of this paper is to discuss the comments received, provide a summary of the evaluation considerations, and examine planned dispositions

An architecture for heuristic control of real-time processes

NASA Technical Reports Server (NTRS)

Raulefs, P.; Thorndyke, P. W.

1987-01-01

Abstract Process management combines complementary approaches of heuristic reasoning and analytical process control. Management of a continuous process requires monitoring the environment and the controlled system, assessing the ongoing situation, developing and revising planned actions, and controlling the execution of the actions. For knowledge-intensive domains, process management entails the potentially time-stressed cooperation among a variety of expert systems. By redesigning a blackboard control architecture in an object-oriented framework, researchers obtain an approach to process management that considerably extends blackboard control mechanisms and overcomes limitations of blackboard systems.

Modeling and Performance Considerations for Automated Fault Isolation in Complex Systems

NASA Technical Reports Server (NTRS)

Ferrell, Bob; Oostdyk, Rebecca

2010-01-01

The purpose of this paper is to document the modeling considerations and performance metrics that were examined in the development of a large-scale Fault Detection, Isolation and Recovery (FDIR) system. The FDIR system is envisioned to perform health management functions for both a launch vehicle and the ground systems that support the vehicle during checkout and launch countdown by using suite of complimentary software tools that alert operators to anomalies and failures in real-time. The FDIR team members developed a set of operational requirements for the models that would be used for fault isolation and worked closely with the vendor of the software tools selected for fault isolation to ensure that the software was able to meet the requirements. Once the requirements were established, example models of sufficient complexity were used to test the performance of the software. The results of the performance testing demonstrated the need for enhancements to the software in order to meet the demands of the full-scale ground and vehicle FDIR system. The paper highlights the importance of the development of operational requirements and preliminary performance testing as a strategy for identifying deficiencies in highly scalable systems and rectifying those deficiencies before they imperil the success of the project

Integrated NTP Vehicle Radiation Design

NASA Technical Reports Server (NTRS)

Caffrey, Jarvis A.; Rodriquez, Mitchell A.

2018-01-01

The development of a nuclear thermal propulsion stage requires consideration for radiation emitted from the nuclear reactor core. Applying shielding mass is an effective mitigating solution, but a better alternative is to incorporate some mitigation strategies into the propulsion stage and crew habitat. In this way, the required additional mass is minimized and the mass that must be applied may in some cases be able to serve multiple purposes. Strategies for crew compartment shielding are discussed that reduce dose from both engine and cosmic sources, and in some cases may also serve to reduce life support risks by permitting abundant water reserves. Early consideration for integrated mitigation solutions in a crewed nuclear thermal propulsion (NTP) vehicle will enable reduced radiation burden from both cosmic and nuclear sources, improved thrust-to-weight ratio or payload capacity by reducing 'dead mass' of shielding, and generally support a more robust risk posture for a NTP-powered Mars mission by permitting shorter trip times and increased water reserves.

Integrated NTP Vehicle Radiation Design

NASA Technical Reports Server (NTRS)

Caffrey, Jarvis; Rodriquez, Mitchell

2018-01-01

The development of a nuclear thermal propulsion stage requires consideration for radiation emitted from the nuclear reactor core. Applying shielding mass is an effective mitigating solution, but a better alternative is to incorporate some mitigation strategies into the propulsion stage and crew habitat. In this way, the required additional mass is minimized and the mass that must be applied may in some cases be able to serve multiple purposes. Strategies for crew compartment shielding are discussed that reduce dose from both engine and cosmic sources, and in some cases may also serve to reduce life support risks by permitting abundant water reserves. Early consideration for integrated mitigation solutions in a crewed nuclear thermal propulsion (NTP) vehicle will enable reduced radiation burden from both cosmic and nuclear sources, improved thrust-to-weight ratio or payload capacity by reducing 'dead mass' of shielding, and generally support a more robust risk posture for a NTP-powered Mars mission by permitting shorter trip times and increased water reserves

Practical considerations in clinical strategy to support the development of injectable drug-device combination products for biologics.

PubMed

Li, Zhaoyang; Easton, Rachael

2018-01-01

The development of an injectable drug-device combination (DDC) product for biologics is an intricate and evolving process that requires substantial investments of time and money. Consequently, the commercial dosage form(s) or presentation(s) are often not ready when pivotal trials commence, and it is common to have drug product changes (manufacturing process or presentation) during clinical development. A scientifically sound and robust bridging strategy is required in order to introduce these changes into the clinic safely. There is currently no single developmental paradigm, but a risk-based hierarchical approach has been well accepted. The rigor required of a bridging package depends on the level of risk associated with the changes. Clinical pharmacokinetic/pharmacodynamic comparability or outcome studies are only required when important changes occur at a late stage. Moreover, an injectable DDC needs to be user-centric, and usability assessment in real-world clinical settings may be required to support the approval of a DDC. In this review, we discuss the common issues during the manufacturing process and presentation development of an injectable DDC and practical considerations in establishing a clinical strategy to address these issues, including key elements of clinical studies. We also analyze the current practice in the industry and review relevant and status of regulatory guidance in the DDC field.

Practical considerations in clinical strategy to support the development of injectable drug-device combination products for biologics

PubMed Central

Easton, Rachael

2018-01-01

ABSTRACT The development of an injectable drug-device combination (DDC) product for biologics is an intricate and evolving process that requires substantial investments of time and money. Consequently, the commercial dosage form(s) or presentation(s) are often not ready when pivotal trials commence, and it is common to have drug product changes (manufacturing process or presentation) during clinical development. A scientifically sound and robust bridging strategy is required in order to introduce these changes into the clinic safely. There is currently no single developmental paradigm, but a risk-based hierarchical approach has been well accepted. The rigor required of a bridging package depends on the level of risk associated with the changes. Clinical pharmacokinetic/pharmacodynamic comparability or outcome studies are only required when important changes occur at a late stage. Moreover, an injectable DDC needs to be user-centric, and usability assessment in real-world clinical settings may be required to support the approval of a DDC. In this review, we discuss the common issues during the manufacturing process and presentation development of an injectable DDC and practical considerations in establishing a clinical strategy to address these issues, including key elements of clinical studies. We also analyze the current practice in the industry and review relevant and status of regulatory guidance in the DDC field. PMID:29035675

Net present biodiversity value and the design of biodiversity offsets.

PubMed

Overton, Jacob McC; Stephens, R T Theo; Ferrier, Simon

2013-02-01

There is an urgent need to develop sound theory and practice for biodiversity offsets to provide a better basis for offset multipliers, to improve accounting for time delays in offset repayments, and to develop a common framework for evaluating in-kind and out-of-kind offsets. Here, we apply concepts and measures from systematic conservation planning and financial accounting to provide a basis for determining equity across type (of biodiversity), space, and time. We introduce net present biodiversity value (NPBV) as a theoretical and practical measure for defining the offset required to achieve no-net-loss. For evaluating equity in type and space we use measures of biodiversity value from systematic conservation planning. Time discount rates are used to address risk of non-repayment, and loss of utility. We illustrate these concepts and measures with two examples of biodiversity impact-offset transactions. Considerable further work is required to understand the characteristics of these approaches.

Guidance for laboratories performing molecular pathology for cancer patients

PubMed Central

Cree, Ian A; Deans, Zandra; Ligtenberg, Marjolijn J L; Normanno, Nicola; Edsjö, Anders; Rouleau, Etienne; Solé, Francesc; Thunnissen, Erik; Timens, Wim; Schuuring, Ed; Dequeker, Elisabeth; Murray, Samuel; Dietel, Manfred; Groenen, Patricia; Van Krieken, J Han

2014-01-01

Molecular testing is becoming an important part of the diagnosis of any patient with cancer. The challenge to laboratories is to meet this need, using reliable methods and processes to ensure that patients receive a timely and accurate report on which their treatment will be based. The aim of this paper is to provide minimum requirements for the management of molecular pathology laboratories. This general guidance should be augmented by the specific guidance available for different tumour types and tests. Preanalytical considerations are important, and careful consideration of the way in which specimens are obtained and reach the laboratory is necessary. Sample receipt and handling follow standard operating procedures, but some alterations may be necessary if molecular testing is to be performed, for instance to control tissue fixation. DNA and RNA extraction can be standardised and should be checked for quality and quantity of output on a regular basis. The choice of analytical method(s) depends on clinical requirements, desired turnaround time, and expertise available. Internal quality control, regular internal audit of the whole testing process, laboratory accreditation, and continual participation in external quality assessment schemes are prerequisites for delivery of a reliable service. A molecular pathology report should accurately convey the information the clinician needs to treat the patient with sufficient information to allow for correct interpretation of the result. Molecular pathology is developing rapidly, and further detailed evidence-based recommendations are required for many of the topics covered here. PMID:25012948

The role of evidence based medicine in neurotrauma.

PubMed

Honeybul, S; Ho, K M

2015-04-01

The introduction of evidence based medicine de-emphasised clinical experience and so-called "background information" and stressed the importance of evidence gained from clinical research when making clinical decisions. For many years randomised controlled trials have been seen to be the only way to advance clinical practice, however, applying this methodology in the context of severe trauma can be problematic. In addition, it is increasingly recognised that considerable clinical experience is required in order to critically evaluate the quality of the evidence and the validity of the conclusions as presented. A contemporary example is seen when considering the role of decompressive craniectomy in the management of neurotrauma. Although there is a considerable amount of evidence available attesting to the efficacy of the procedure, considerable clinical expertise is required in order to properly interpret the results of these studies and the implications for clinical practice. Given these limitations the time may have come for a redesign of the traditional pyramid of evidence, to a model that re-emphasises the importance of "background information" such as pathophysiology and acknowledges the role of clinical experience such that the evidence can be critically evaluated in its appropriate context and the subsequent implications for clinical practice be clearly and objectively defined. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

An Approach for Integrating the Prioritization of Functional and Nonfunctional Requirements

PubMed Central

Dabbagh, Mohammad; Lee, Sai Peck

2014-01-01

Due to the budgetary deadlines and time to market constraints, it is essential to prioritize software requirements. The outcome of requirements prioritization is an ordering of requirements which need to be considered first during the software development process. To achieve a high quality software system, both functional and nonfunctional requirements must be taken into consideration during the prioritization process. Although several requirements prioritization methods have been proposed so far, no particular method or approach is presented to consider both functional and nonfunctional requirements during the prioritization stage. In this paper, we propose an approach which aims to integrate the process of prioritizing functional and nonfunctional requirements. The outcome of applying the proposed approach produces two separate prioritized lists of functional and non-functional requirements. The effectiveness of the proposed approach has been evaluated through an empirical experiment aimed at comparing the approach with the two state-of-the-art-based approaches, analytic hierarchy process (AHP) and hybrid assessment method (HAM). Results show that our proposed approach outperforms AHP and HAM in terms of actual time-consumption while preserving the quality of the results obtained by our proposed approach at a high level of agreement in comparison with the results produced by the other two approaches. PMID:24982987

An approach for integrating the prioritization of functional and nonfunctional requirements.

PubMed

Dabbagh, Mohammad; Lee, Sai Peck

2014-01-01

Due to the budgetary deadlines and time to market constraints, it is essential to prioritize software requirements. The outcome of requirements prioritization is an ordering of requirements which need to be considered first during the software development process. To achieve a high quality software system, both functional and nonfunctional requirements must be taken into consideration during the prioritization process. Although several requirements prioritization methods have been proposed so far, no particular method or approach is presented to consider both functional and nonfunctional requirements during the prioritization stage. In this paper, we propose an approach which aims to integrate the process of prioritizing functional and nonfunctional requirements. The outcome of applying the proposed approach produces two separate prioritized lists of functional and non-functional requirements. The effectiveness of the proposed approach has been evaluated through an empirical experiment aimed at comparing the approach with the two state-of-the-art-based approaches, analytic hierarchy process (AHP) and hybrid assessment method (HAM). Results show that our proposed approach outperforms AHP and HAM in terms of actual time-consumption while preserving the quality of the results obtained by our proposed approach at a high level of agreement in comparison with the results produced by the other two approaches.

77 FR 29345 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-17

... of the Currency), Director Richard Cordray (Director, Consumer Financial Protection Bureau) and Acting Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters... earlier notice of the meeting was practicable; that the public interest did not require consideration of...

NACS Store Planning Manual.

ERIC Educational Resources Information Center

College Store Journal, 1979

1979-01-01

Topics discussed by the NACS Store Planning/Renovation Committees in this updated version of the college store renovation manual include: short- and long-range planning, financial considerations, professional planning assistance, the store's image and business character, location considerations, building requirements, space requirements, fixtures,…

IMPACTS OF IMAGERY TEMPORAL FREQUENCES ON LAND-COVER CHANGE DETECTION MONITORING

EPA Science Inventory

An important consideration for monitoring land~cover (LC) change is the nominal temporal frequency of remote sensor data acquisitions required to adequately characterize change events, Ecosystem specific regeneration rates are an important consideration for determining the requir...

Scheduler Design Criteria: Requirements and Considerations

NASA Technical Reports Server (NTRS)

Lee, Hanbong

2016-01-01

This presentation covers fundamental requirements and considerations for developing schedulers in airport operations. We first introduce performance and functional requirements for airport surface schedulers. Among various optimization problems in airport operations, we focus on airport surface scheduling problem, including runway and taxiway operations. We then describe a basic methodology for airport surface scheduling such as node-link network model and scheduling algorithms previously developed. Next, we explain how to design a mathematical formulation in more details, which consists of objectives, decision variables, and constraints. Lastly, we review other considerations, including optimization tools, computational performance, and performance metrics for evaluation.

48 CFR 32.005 - Consideration for contract financing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Consideration for contract... GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING 32.005 Consideration for contract financing. (a... separate consideration for the contract financing clause. The value of the contract financing to the...

Midwives caring for asylum-seeking women: research findings.

PubMed

Bennett, Sarah; Scammell, Janet

2014-01-01

Over the past decade, the numbers of women seeking asylum in the United Kingdom (UK) and requiring midwifery care have increased significantly (Office for National Statistics (ONS) 2012). This article describes findings from a small study that explored the experiences of midwives caring for asylum seeking women. Time and communication emerged as significant factors impacting on quality of care and these are the focus of this article. Caring for these women was emotionally challenging and at times frustrating due to poor access to information and support. In conclusion, whilst considerable knowledge and skills were required to care for this vulnerable group, these appeared to be learned almost solely 'on the job': Implications for service delivery and education are explored and recommendations made to improve experiences for women and midwives.

Disk space and load time requirements for eye movement biometric databases

NASA Astrophysics Data System (ADS)

Kasprowski, Pawel; Harezlak, Katarzyna

2016-06-01

Biometric identification is a very popular area of interest nowadays. Problems with the so-called physiological methods like fingerprints or iris recognition resulted in increased attention paid to methods measuring behavioral patterns. Eye movement based biometric (EMB) identification is one of the interesting behavioral methods and due to the intensive development of eye tracking devices it has become possible to define new methods for the eye movement signal processing. Such method should be supported by an efficient storage used to collect eye movement data and provide it for further analysis. The aim of the research was to check various setups enabling such a storage choice. There were various aspects taken into consideration, like disk space usage, time required for loading and saving whole data set or its chosen parts.

Methodology for the passive control of orbital inclination and mean local time to meet sun-synchronous orbit requirements

NASA Technical Reports Server (NTRS)

Folta, David; Kraft, Lauri

1992-01-01

The mean local time (MLT) of equatorial crossing of a sun-synchronous Earth-observing spacecraft orbit drifts with inclination; therefore, in order to maintain the MLT, the inclination must be controlled. Inclination may be maintained actively by costly out-of-plane maneuvers or passively by using the perturbing forces due to the sun and moon. This paper examines the passive control approach using the Earth Observing System (EOS) as a basis for the discussion. Applications to Landsat and National Oceanic and Atmospheric Administration (NOAA) spacecraft are presented for comparison. This technique is especially beneficial to spacecraft lacking propulsion systems. The results indicate that passive inclination control appears to be the preferable maintenance method when spacecraft weight restrictions, operational considerations, and scientific requirements apply.

Aeroelastic simulation of higher harmonic control

NASA Technical Reports Server (NTRS)

Robinson, Lawson H.; Friedmann, Peretz P.

1994-01-01

This report describes the development of an aeroelastic analysis of a helicopter rotor and its application to the simulation of helicopter vibration reduction through higher harmonic control (HHC). An improved finite-state, time-domain model of unsteady aerodynamics is developed to capture high frequency aerodynamic effects. An improved trim procedure is implemented which accounts for flap, lead-lag, and torsional deformations of the blade. The effect of unsteady aerodynamics is studied and it is found that its impact on blade aeroelastic stability and low frequency response is small, but it has a significant influence on rotor hub vibrations. Several different HHC algorithms are implemented on a hingeless rotor and their effectiveness in reducing hub vibratory shears is compared. All the controllers are found to be quite effective, but very differing HHC inputs are required depending on the aerodynamic model used. Effects of HHC on rotor stability and power requirements are found to be quite small. Simulations of roughly equivalent articulated and hingeless rotors are carried out, and it is found that hingeless rotors can require considerably larger HHC inputs to reduce vibratory shears. This implies that the practical implementation of HHC on hingeless rotors might be considerably more difficult than on articulated rotors.

Management of recurrent or metastatic thyroid cancer.

PubMed

Tahara, Makoto

2018-01-01

Recently, vascular endothelial growth factor receptor (VEGFR)-targeted tyrosine kinase inhibitors (TKIs) have become available for the treatment of recurrent or metastatic thyroid cancer. However, a number of clinical challenges that impact the use of VEGFR-targeted TKI in daily clinical practice have arisen. Toxicity is considerable, to the extent that most physicians hesitate to start VEGFR-targeted TKI and prefer to continue a watch-and-wait approach until the patient's disease markedly worsens. This delayed use of VEGFR-targeted TKI leads to a higher incidence of serious adverse events than was reported in clinical trials. Moreover, the watch-and-wait approach has several demerits, including a worsening of quality of life, worsening of outcomes in patients of older age or with follicular thyroid cancer and increased risk of brain metastasis or bleeding. Thus, optimal timing for the start of VEGFR-targeted TKI requires careful consideration. Moreover, management of VEGFR-targeted TKI toxicities requires appropriate supportive care, well-organised infrastructure in the outpatient clinic and patient education. Future treatment will progress to precision medicine based on molecular testing. Promotion of precision medicine requires the establishment of a system of easy access to molecular testing and the promotion of translational research for the development of new drugs.

Supervising Remote Humanoids Across Intermediate Time Delay

NASA Technical Reports Server (NTRS)

Hambuchen, Kimberly; Bluethmann, William; Goza, Michael; Ambrose, Robert; Rabe, Kenneth; Allan, Mark

2006-01-01

The President's Vision for Space Exploration, laid out in 2004, relies heavily upon robotic exploration of the lunar surface in early phases of the program. Prior to the arrival of astronauts on the lunar surface, these robots will be required to be controlled across space and time, posing a considerable challenge for traditional telepresence techniques. Because time delays will be measured in seconds, not minutes as is the case for Mars Exploration, uploading the plan for a day seems excessive. An approach for controlling humanoids under intermediate time delay is presented. This approach uses software running within a ground control cockpit to predict an immersed robot supervisor's motions which the remote humanoid autonomously executes. Initial results are presented.

Cyclicality, Mortality, and the Value of Time: The Case of Coffee Price Fluctuations and Child Survival in Colombia

PubMed Central

Miller, Grant; Urdinola, B. Piedad

2011-01-01

Recent studies demonstrate procyclical mortality in wealthy countries, but there are reasons to expect a countercyclical relationship in developing nations. We investigate how child survival in Colombia responds to fluctuations in world Arabica coffee prices – and document starkly procyclical child deaths. In studying this result’s behavioral underpinnings, we highlight that: (1) The leading determinants of child health are inexpensive but require considerable time, and (2) As the value of time declines with falling coffee prices, so does the relative price of health. We find a variety of direct evidence consistent with the primacy of time in child health production. PMID:22090662

Signal and background considerations for the MRSt on the National Ignition Facility (NIF).

PubMed

Wink, C W; Frenje, J A; Hilsabeck, T J; Bionta, R; Khater, H Y; Gatu Johnson, M; Kilkenny, J D; Li, C K; Séguin, F H; Petrasso, R D

2016-11-01

A Magnetic Recoil Spectrometer (MRSt) has been conceptually designed for time-resolved measurements of the neutron spectrum at the National Ignition Facility. Using the MRSt, the goals are to measure the time-evolution of the spectrum with a time resolution of ∼20-ps and absolute accuracy better than 5%. To meet these goals, a detailed understanding and optimization of the signal and background characteristics are required. Through ion-optics, MCNP simulations, and detector-response calculations, it is demonstrated that the goals and a signal-to background >5-10 for the down-scattered neutron measurement are met if the background, consisting of ambient neutrons and gammas, at the MRSt is reduced 50-100 times.

Thermal scanner data for studying freeze conditions and for aiding irrigation scheduling

NASA Technical Reports Server (NTRS)

Bartholic, J. F.; Wiegand, C. L.; Leamer, R. W.; Namken, L. N.

1970-01-01

The use of thermal imagery in connection with plant water stress appears to hold considerable potential, particularly with scanners such as the RS-14 where internal calibration sources can be adjusted to bracket the temperatures of interest. The data from the thermal film are fairly easy to reduce; however, data reduction in 3 days or less would be required before it could be used in irrigation timing.

Guidelines for the planning and preparation of illustrated technical talks

NASA Technical Reports Server (NTRS)

Hubbard, H. H.

1975-01-01

Guidelines are presented for the preparation of illustrated talks which are audience oriented and which are aimed at the efficient transfer of technical information. Early decisions concerning the required number of slides are helpful in initial planning for a good quality talk. Detailed considerations are: the establishment of limited objectives, selection of appropriate slide material, development of a text which is well coordinated with the slides, and accurate timing.

Uninterruptible Power Systems: Operational and Cost Considerations.

DTIC Science & Technology

1977-03-01

functions are degraded by power line disturbances to an extent that some type of power conditioning equipment is warranted. Possibly, the management policy...disasters, or attack; i.e., at exactly the times when commercial power utility service is most likely to be disrupted or degraded . In the past... degradation of readiness in emergencies are more pertinent criteria, but unfortunately are not readily comparable to the cost of equipment required

The RACE (R&D in Advanced Communications Technologies for Europe) Program of the European Communities

DTIC Science & Technology

1988-08-17

asynchronous TDM for all channels; and hybrid solu- However, since technoeconomic considerations may im- tions, possibly involving dynamic rearranging. A...qualitative electronic switching are favored: CMOS, silicon bipolar, analysis , under the headings: timing of introduction, net- and gallium arsenide...or ring configurations. tem requirements. Project 1029. In this project an up-to-date analysis Microelectronic Components was made of the state of the

Motion Planning of Two Stacker Cranes in a Large-Scale Automated Storage/Retrieval System

NASA Astrophysics Data System (ADS)

Kung, Yiheng; Kobayashi, Yoshimasa; Higashi, Toshimitsu; Ota, Jun

We propose a method for reducing the computational time of motion planning for stacker cranes. Most automated storage/retrieval systems (AS/RSs) are only equipped with one stacker crane. However, this is logistically challenging, and greater work efficiency in warehouses, such as those using two stacker cranes, is required. In this paper, a warehouse with two stacker cranes working simultaneously is proposed. Unlike warehouses with only one crane, trajectory planning in those with two cranes is very difficult. Since there are two cranes working together, a proper trajectory must be considered to avoid collision. However, verifying collisions is complicated and requires a considerable amount of computational time. As transport work in AS/RSs occurs randomly, motion planning cannot be conducted in advance. Planning an appropriate trajectory within a restricted duration would be a difficult task. We thereby address the current problem of motion planning requiring extensive calculation time. As a solution, we propose a “free-step” to simplify the procedure of collision verification and reduce the computational time. On the other hand, we proposed a method to reschedule the order of collision verification in order to find an appropriate trajectory in less time. By the proposed method, we reduce the calculation time to less than 1/300 of that achieved in former research.

78 FR 41928 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... the Currency), Director Richard Cordray (Director, Consumer Financial Protection Bureau), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be... the meeting was practicable; that the public interest did not require consideration of the matters in...

78 FR 48678 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-09

... the Currency), Director Richard Cordray (Director, Consumer Financial Protection Bureau), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be... the meeting was practicable; that the public interest did not require consideration of the matters in...

78 FR 75920 - Sunshine Act Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-13

... the Currency), Director Richard Cordray (Director, Consumer Financial Protection Bureau), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be... the meeting was practicable; that the public interest did not require consideration of the matters in...

78 FR 34100 - Sunshine Act Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-06

... the Currency), Director Richard Cordray (Director, Consumer Financial Protection Bureau), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be... the meeting was practicable; that the public interest did not require consideration of the matters in...

78 FR 31548 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-24

... Currency), Director Richard Cordray (Director, Consumer Financial Protection Bureau), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be the subject... was practicable; that the public interest did not require consideration of the matters in a meeting...

78 FR 66005 - Notice of Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-04

... of the Currency), Director Richard Cordray (Director, Consumer Financial Protection Bureau), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which... notice of the meeting was practicable; that the public interest did not require consideration of the...

Engine design considerations for 2nd generation supersonic transports

NASA Technical Reports Server (NTRS)

Howlett, R. A.

1975-01-01

The environmental and economic goals projected for advanced supersonic transports will require revolutionary improvements in propulsion systems. Variable cycle engine concepts that incorporate unique components and advanced technologies show promise in meeting these goals. Pratt & Whitney Aircraft is conducting conceptual design studies of variable cycle engine concepts under NASA sponsorship. This paper reviews some of the design considerations for these engine concepts. Emphasis is placed on jet noise abatement, reduction of emissions, performance improvements, installation considerations, hot-section characteristics and control system requirements. Two representative variable cycle engine concepts that incorporate these basic design considerations are described.

The solar UV exposure time required for vitamin D3 synthesis in the human body estimated by numerical simulation and observation in Japan

NASA Astrophysics Data System (ADS)

Nakajima, Hideaki; Miyauchi, Masaatsu; Hirai, Chizuko

2013-04-01

After the discovery of Antarctic ozone hole, the negative effect of exposure of human body to harmful solar ultraviolet (UV) radiation is widely known. However, there is positive effect of exposure to UV radiation, i.e., vitamin D synthesis. Although the importance of solar UV radiation for vitamin D3 synthesis in the human body is well known, the solar exposure time required to prevent vitamin D deficiency has not been well determined. This study attempted to identify the time of solar exposure required for vitamin D3 synthesis in the body by season, time of day, and geographic location (Sapporo, Tsukuba, and Naha, in Japan) using both numerical simulations and observations. According to the numerical simulation for Tsukuba at noon in July under a cloudless sky, 2.3 min of solar exposure are required to produce 5.5 μg vitamin D3 per 600 cm2 skin. This quantity of vitamin D represents the recommended intake for an adult by the Ministry of Health, Labour and Welfare, and the 2010 Japanese Dietary Reference Intakes (DRIs). In contrast, it took 49.5 min to produce the same amount of vitamin D3 at Sapporo in the northern part of Japan in December, at noon under a cloudless sky. The necessary exposure time varied considerably with the time of the day. For Tsukuba at noon in December, 14.5 min were required, but at 09:00 68.7 min were required and at 15:00 175.8 min were required for the same meteorological conditions. Naha receives high levels of UV radiation allowing vitamin D3 synthesis almost throughout the year. According to our results, we are further developing an index to quantify the necessary time of UV radiation exposure to produce required amount of vitamin D3 from a UV radiation data.

Virtual Surgical Planning for Inferior Alveolar Nerve Reconstruction.

PubMed

Miloro, Michael; Markiewicz, Michael R

2017-11-01

The purpose of this study was to assess the outcomes after preoperative virtual surgical planning (VSP) for inferior alveolar nerve (IAN) reconstruction in ablative mandibular surgery. We performed a retrospective evaluation of consecutive surgical cases using standard VSP for hard tissue resection and reconstructive surgery in addition to IAN VSP performed simultaneously during surgery. Cases were assessed regarding the planning time, additional costs involved, surgeon's subjective impression of the process, accuracy of the prediction during surgery, and operative time during surgery compared with cases performed without VSP. The study sample was composed of 5 cases of mandibular resection for benign disease, with bony, soft tissue, and neural reconstruction with the use of VSP. The addition of IAN reconstruction to the VSP session added no additional expense to the planning session but resulted in an additional 22.5 minutes (±7.5 minutes) for the webinar session. From a subjective standpoint, IAN VSP provided the surgeon with a discreet plan for surgery. From an objective standpoint, IAN VSP provided the exact length and diameter of nerve graft required for surgery, facilitated the surgeon's ability to visualize the actual nerve graft procedure, and limited the additional time required for simultaneous nerve reconstruction. Despite perceived prejudice against simultaneous IAN reconstruction with complex mandibular resection and reconstruction, the use of IAN VSP may facilitate the actual surgical procedure and result in considerably improved patient outcomes without considerable additional time or cost associated with this protocol. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Computational time reduction for sequential batch solutions in GNSS precise point positioning technique

NASA Astrophysics Data System (ADS)

Martín Furones, Angel; Anquela Julián, Ana Belén; Dimas-Pages, Alejandro; Cos-Gayón, Fernando

2017-08-01

Precise point positioning (PPP) is a well established Global Navigation Satellite System (GNSS) technique that only requires information from the receiver (or rover) to obtain high-precision position coordinates. This is a very interesting and promising technique because eliminates the need for a reference station near the rover receiver or a network of reference stations, thus reducing the cost of a GNSS survey. From a computational perspective, there are two ways to solve the system of observation equations produced by static PPP either in a single step (so-called batch adjustment) or with a sequential adjustment/filter. The results of each should be the same if they are both well implemented. However, if a sequential solution (that is, not only the final coordinates, but also those observed in previous GNSS epochs), is needed, as for convergence studies, finding a batch solution becomes a very time consuming task owing to the need for matrix inversion that accumulates with each consecutive epoch. This is not a problem for the filter solution, which uses information computed in the previous epoch for the solution of the current epoch. Thus filter implementations need extra considerations of user dynamics and parameter state variations between observation epochs with appropriate stochastic update parameter variances from epoch to epoch. These filtering considerations are not needed in batch adjustment, which makes it attractive. The main objective of this research is to significantly reduce the computation time required to obtain sequential results using batch adjustment. The new method we implemented in the adjustment process led to a mean reduction in computational time by 45%.

Optimal processor assignment for pipeline computations

NASA Technical Reports Server (NTRS)

Nicol, David M.; Simha, Rahul; Choudhury, Alok N.; Narahari, Bhagirath

1991-01-01

The availability of large scale multitasked parallel architectures introduces the following processor assignment problem for pipelined computations. Given a set of tasks and their precedence constraints, along with their experimentally determined individual responses times for different processor sizes, find an assignment of processor to tasks. Two objectives are of interest: minimal response given a throughput requirement, and maximal throughput given a response time requirement. These assignment problems differ considerably from the classical mapping problem in which several tasks share a processor; instead, it is assumed that a large number of processors are to be assigned to a relatively small number of tasks. Efficient assignment algorithms were developed for different classes of task structures. For a p processor system and a series parallel precedence graph with n constituent tasks, an O(np2) algorithm is provided that finds the optimal assignment for the response time optimization problem; it was found that the assignment optimizing the constrained throughput in O(np2log p) time. Special cases of linear, independent, and tree graphs are also considered.

Physician to investigator: clinical practice to clinical research--ethical, operational, and financial considerations.

PubMed

Pierre, Christine

2008-01-01

Physicians who participate in clinical research studies gain benefits for themselves, their practice, and their patients. Historically, private practice physicians have chosen to defer to their counterparts in academic medicine when it comes to contributing to scientific advancement through clinical studies. A growing number of private practice physicians are now taking a serious second look and deciding that there are unique benefits for both the practice and the patient. Physicians who decide to participate in clinical research should give serious consideration to the time and resources that are required to meet both federal regulations and industry standards. In addition, ethical and scientific principles for assuring the protection of human research subjects must be a paramount commitment.

Memory-Efficient Analysis of Dense Functional Connectomes.

PubMed

Loewe, Kristian; Donohue, Sarah E; Schoenfeld, Mircea A; Kruse, Rudolf; Borgelt, Christian

2016-01-01

The functioning of the human brain relies on the interplay and integration of numerous individual units within a complex network. To identify network configurations characteristic of specific cognitive tasks or mental illnesses, functional connectomes can be constructed based on the assessment of synchronous fMRI activity at separate brain sites, and then analyzed using graph-theoretical concepts. In most previous studies, relatively coarse parcellations of the brain were used to define regions as graphical nodes. Such parcellated connectomes are highly dependent on parcellation quality because regional and functional boundaries need to be relatively consistent for the results to be interpretable. In contrast, dense connectomes are not subject to this limitation, since the parcellation inherent to the data is used to define graphical nodes, also allowing for a more detailed spatial mapping of connectivity patterns. However, dense connectomes are associated with considerable computational demands in terms of both time and memory requirements. The memory required to explicitly store dense connectomes in main memory can render their analysis infeasible, especially when considering high-resolution data or analyses across multiple subjects or conditions. Here, we present an object-based matrix representation that achieves a very low memory footprint by computing matrix elements on demand instead of explicitly storing them. In doing so, memory required for a dense connectome is reduced to the amount needed to store the underlying time series data. Based on theoretical considerations and benchmarks, different matrix object implementations and additional programs (based on available Matlab functions and Matlab-based third-party software) are compared with regard to their computational efficiency. The matrix implementation based on on-demand computations has very low memory requirements, thus enabling analyses that would be otherwise infeasible to conduct due to insufficient memory. An open source software package containing the created programs is available for download.

Memory-Efficient Analysis of Dense Functional Connectomes

PubMed Central

Loewe, Kristian; Donohue, Sarah E.; Schoenfeld, Mircea A.; Kruse, Rudolf; Borgelt, Christian

2016-01-01

The functioning of the human brain relies on the interplay and integration of numerous individual units within a complex network. To identify network configurations characteristic of specific cognitive tasks or mental illnesses, functional connectomes can be constructed based on the assessment of synchronous fMRI activity at separate brain sites, and then analyzed using graph-theoretical concepts. In most previous studies, relatively coarse parcellations of the brain were used to define regions as graphical nodes. Such parcellated connectomes are highly dependent on parcellation quality because regional and functional boundaries need to be relatively consistent for the results to be interpretable. In contrast, dense connectomes are not subject to this limitation, since the parcellation inherent to the data is used to define graphical nodes, also allowing for a more detailed spatial mapping of connectivity patterns. However, dense connectomes are associated with considerable computational demands in terms of both time and memory requirements. The memory required to explicitly store dense connectomes in main memory can render their analysis infeasible, especially when considering high-resolution data or analyses across multiple subjects or conditions. Here, we present an object-based matrix representation that achieves a very low memory footprint by computing matrix elements on demand instead of explicitly storing them. In doing so, memory required for a dense connectome is reduced to the amount needed to store the underlying time series data. Based on theoretical considerations and benchmarks, different matrix object implementations and additional programs (based on available Matlab functions and Matlab-based third-party software) are compared with regard to their computational efficiency. The matrix implementation based on on-demand computations has very low memory requirements, thus enabling analyses that would be otherwise infeasible to conduct due to insufficient memory. An open source software package containing the created programs is available for download. PMID:27965565

Design considerations for computationally constrained two-way real-time video communication

NASA Astrophysics Data System (ADS)

Bivolarski, Lazar M.; Saunders, Steven E.; Ralston, John D.

2009-08-01

Today's video codecs have evolved primarily to meet the requirements of the motion picture and broadcast industries, where high-complexity studio encoding can be utilized to create highly-compressed master copies that are then broadcast one-way for playback using less-expensive, lower-complexity consumer devices for decoding and playback. Related standards activities have largely ignored the computational complexity and bandwidth constraints of wireless or Internet based real-time video communications using devices such as cell phones or webcams. Telecommunications industry efforts to develop and standardize video codecs for applications such as video telephony and video conferencing have not yielded image size, quality, and frame-rate performance that match today's consumer expectations and market requirements for Internet and mobile video services. This paper reviews the constraints and the corresponding video codec requirements imposed by real-time, 2-way mobile video applications. Several promising elements of a new mobile video codec architecture are identified, and more comprehensive computational complexity metrics and video quality metrics are proposed in order to support the design, testing, and standardization of these new mobile video codecs.

77 FR 68121 - Notice of Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-15

... Acting Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters..., Consumer Financial Protection Bureau), seconded by Director Thomas M. Hoenig (Appointive), concurred in by... earlier notice of the meeting was practicable; that the public interest did not require consideration of...

78 FR 56229 - Sunshine Act Meeting Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-12

..., Consumer Financial Protection Bureau), Director Thomas J. Curry (Comptroller of the Currency), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be... the meeting was practicable; that the public interest did not require consideration of the matters in...

78 FR 3895 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-17

..., Consumer Financial Protection Bureau), Director Thomas J. Curry (Comptroller of the Currency), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be... the meeting was practicable; that the public interest did not require consideration of the matters in...

77 FR 74186 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

..., Consumer Financial Protection Bureau), and Chairman Martin J. Gruenberg, that Corporation business required its consideration of the matters which were to be the subject of this meeting on less than seven days... not require consideration of the matters in a meeting open to public observation; and that the matters...

Synthetic Vision Systems - Operational Considerations Simulation Experiment

NASA Technical Reports Server (NTRS)

Kramer, Lynda J.; Williams, Steven P.; Bailey, Randall E.; Glaab, Louis J.

2007-01-01

Synthetic vision is a computer-generated image of the external scene topography that is generated from aircraft attitude, high-precision navigation information, and data of the terrain, obstacles, cultural features, and other required flight information. A synthetic vision system (SVS) enhances this basic functionality with real-time integrity to ensure the validity of the databases, perform obstacle detection and independent navigation accuracy verification, and provide traffic surveillance. Over the last five years, NASA and its industry partners have developed and deployed SVS technologies for commercial, business, and general aviation aircraft which have been shown to provide significant improvements in terrain awareness and reductions in the potential for Controlled-Flight-Into-Terrain incidents/accidents compared to current generation cockpit technologies. It has been hypothesized that SVS displays can greatly improve the safety and operational flexibility of flight in Instrument Meteorological Conditions (IMC) to a level comparable to clear-day Visual Meteorological Conditions (VMC), regardless of actual weather conditions or time of day. An experiment was conducted to evaluate SVS and SVS-related technologies as well as the influence of where the information is provided to the pilot (e.g., on a Head-Up or Head-Down Display) for consideration in defining landing minima based upon aircraft and airport equipage. The "operational considerations" evaluated under this effort included reduced visibility, decision altitudes, and airport equipage requirements, such as approach lighting systems, for SVS-equipped aircraft. Subjective results from the present study suggest that synthetic vision imagery on both head-up and head-down displays may offer benefits in situation awareness; workload; and approach and landing performance in the visibility levels, approach lighting systems, and decision altitudes tested.

Synthetic vision systems: operational considerations simulation experiment

NASA Astrophysics Data System (ADS)

Kramer, Lynda J.; Williams, Steven P.; Bailey, Randall E.; Glaab, Louis J.

2007-04-01

Synthetic vision is a computer-generated image of the external scene topography that is generated from aircraft attitude, high-precision navigation information, and data of the terrain, obstacles, cultural features, and other required flight information. A synthetic vision system (SVS) enhances this basic functionality with real-time integrity to ensure the validity of the databases, perform obstacle detection and independent navigation accuracy verification, and provide traffic surveillance. Over the last five years, NASA and its industry partners have developed and deployed SVS technologies for commercial, business, and general aviation aircraft which have been shown to provide significant improvements in terrain awareness and reductions in the potential for Controlled-Flight-Into-Terrain incidents / accidents compared to current generation cockpit technologies. It has been hypothesized that SVS displays can greatly improve the safety and operational flexibility of flight in Instrument Meteorological Conditions (IMC) to a level comparable to clear-day Visual Meteorological Conditions (VMC), regardless of actual weather conditions or time of day. An experiment was conducted to evaluate SVS and SVS-related technologies as well as the influence of where the information is provided to the pilot (e.g., on a Head-Up or Head-Down Display) for consideration in defining landing minima based upon aircraft and airport equipage. The "operational considerations" evaluated under this effort included reduced visibility, decision altitudes, and airport equipage requirements, such as approach lighting systems, for SVS-equipped aircraft. Subjective results from the present study suggest that synthetic vision imagery on both head-up and head-down displays may offer benefits in situation awareness; workload; and approach and landing performance in the visibility levels, approach lighting systems, and decision altitudes tested.

MO-E-BRC-00: Online Adaptive Radiotherapy - Considerations for Practical Clinical Implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Online adaptive radiation therapy has the potential to ensure delivery of optimal treatment to the patient by accounting for anatomical and potentially functional changes that occur from one fraction to the next and over the course of treatment. While on-line adaptive RT (ART) has been a topic of many publications, discussions, and research, it has until very recently remained largely a concept and not a practical implementation. However, recent advances in on-table imaging, use of deformable image registration for contour generation and dose tracking, faster and more efficient plan optimization, as well as fast quality assurance method has enabled themore » implementation of ART in the clinic in the past couple of years. The introduction of these tools into routine clinical use requires many considerations and progressive knowledge to understand how processes that have historically taken hours/days to complete can now be done in less than 30 minutes. This session will discuss considerations to perform real time contouring, planning and patient specific QA, as well as a practical workflow and the required resources. Learning Objectives: To understand the difficulties, challenges and available technologies for online adaptive RT. To understand how to implement online adaptive therapy in a clinical environment and to understand the workflow and resources required. To understand the limitations and sources of uncertainty in the online adaptive process I have research funding from ViewRay Inc. and Philips Medical Systems.; R. Kashani, I have research funding from ViewRay Inc. and Philips Medical Systems.; X. Li, Research supported by Elekta Inc.« less

Considerations for the Next Revision of NASA's Space Telecommunications Radio System Architecture

NASA Technical Reports Server (NTRS)

Johnson, Sandra K.; Handler, Louis M.; Briones, Janette C.

2016-01-01

Development of NASA's Software Defined Radio architecture, the Space Telecommunication Radio System (STRS), was initiated in 2004 with a goal of reducing the cost, risk and schedule when implementing Software Defined Radios (SDR) for National Aeronautics and Space Administration (NASA) space missions. Since STRS was first flown in 2012 on three Software Defined Radios on the Space Communication and Navigation (SCaN) Testbed, only minor changes have been made to the architecture. Multiple entities have since implemented the architecture and provided significant feedback for consideration for the next revision of the standard. The focus for the first set of updates to the architecture is items that enhance application portability. Items that require modifications to existing applications before migrating to the updated architecture will only be considered if there is compelling reasons to make the change. The significant suggestions that were further evaluated for consideration include expanding and clarifying the timing Application Programming Interfaces (APIs), improving handle name and identification (ID) definitions and use, and multiple items related to implementation of STRS Devices. In addition to ideas suggested while implementing STRS, SDR technology has evolved significantly and this impact to the architecture needs to be considered. These include incorporating cognitive concepts - learning from past decisions and making new decisions that the radio can act upon. SDRs are also being developed that do not contain a General Purpose Module - which is currently required for the platform to be STRS compliant. The purpose of this paper is to discuss the comments received, provide a summary of the evaluation considerations, and examine planned dispositions.

Human milk and breast feeding: an update on the state of the art.

PubMed

Ogra, P L; Greene, H L

1982-04-01

Current approaches to infant feeding have been based on the level of available knowledge of nutritional requirements of full term and low birth weight (LBW) infants and on established cultural traditions in many contemporary societies. This discussion summarizes existing information about infant nutrition and immunobiologic aspects of human milk, which may influence the choice of breast versus bottle feeding of infants in different parts of the world. The average caloric requirement for a normal full term infant from the 2nd day of age through the 1st year of life is estimated to be about 100-110 Kcal/kg/day. Caloric intake of less than 80 Kcal/kg/day is usually insufficient for physiologic needs and intakes over the average requirement may be associated with obesity. The minimum requirement for protien has been estimated to be about 1.8 gm/100 Kcal and protein intake of over 4.5 gm/100 Kcal may result in an increased urea nitrogen retention. The nutritional requirements of premature and LBW infants have not been clearly established, but the nutritional needs of a LBW infant appear to be significantly higher than the requirements of a normal full term infant. The chemical composition of human milk exhibits considerable variation between different individuals and in the same individual at different times of lactation, as well as between samples obtained from mothers of LBW infants and full term infants. Fresh milk contains a wealth of components that provide specific and nonspecific defenses against infectious agents or other macromolecules. The concentrations of protein, whey protein nitrogen, sodium and potassium in cow's milk are 2-3 times higher than in human milk. Only limited information is available about the spectrum of environmental chemical and toxins present in cow's milk. The composition of human milk meets the minimum requirements for protein and calories for a growing full term infant, despite the fact that protein content of pooled human milk is low (0.9 gm/ml). Breastfeeding seems to result in a more balanced solute load because breastfed babies appear to require less water than babies fed on cow's milk. Commercial formula products often require reconstitution and supplementation with certain additives during manufacture or at the time of its feeding to the infant. Careful, but sparse epidemiologic studies conducted recently in several rural and urban settings, demonstrated a striking resistance of breastfed infants to colonization by coliform organisms. In modern times possibly the single most important consideration for the use of breastfeeding is its cost. Infants fed human milk do not grow as rapidly as those fed most commercial formulas, but there is no evidence to suggest that rapid growth is a desirable goal of nutrition for normal neonates. Conclusive evidence of overwhelming nutritional advantages of human nilk and breastfeeding over commercial milk products (which are properly reconstituted under sterile conditions) is not available at this time.

Exploring Gigabyte Datasets in Real Time: Architectures, Interfaces and Time-Critical Design

NASA Technical Reports Server (NTRS)

Bryson, Steve; Gerald-Yamasaki, Michael (Technical Monitor)

1998-01-01

Architectures and Interfaces: The implications of real-time interaction on software architecture design: decoupling of interaction/graphics and computation into asynchronous processes. The performance requirements of graphics and computation for interaction. Time management in such an architecture. Examples of how visualization algorithms must be modified for high performance. Brief survey of interaction techniques and design, including direct manipulation and manipulation via widgets. talk discusses how human factors considerations drove the design and implementation of the virtual wind tunnel. Time-Critical Design: A survey of time-critical techniques for both computation and rendering. Emphasis on the assignment of a time budget to both the overall visualization environment and to each individual visualization technique in the environment. The estimation of the benefit and cost of an individual technique. Examples of the modification of visualization algorithms to allow time-critical control.

Species Profiles: Life Histories and Environmental Requirements of Coastal Fishes and Invertebrates (Pacific Northwest), Chum Salmon

DTIC Science & Technology

1988-03-01

respect, they are considerably unlike (J. Ames, 1984, WDF; pers. comm.). In sockeye, Oncorhynchus nerka , coho, Southern British Columbia, the average...NOMENCLATURE/TAXONOMY/RANGE MORPHOLOGY/IDENTIFICATION AIDS Scientific name.. Oncorhynchus keta Dorsal fin 10-13 rays; adipose . (Walbaum 1792) (Figure 1) fin... Oncorhynchus gorbuscha, spend minimal salmon that spawn in large river 1, time rearing in freshwater. In this systems is sometimes twice that long f

Assessment of Li/SOCL2 Battery Technology; Reserve, Thin-Cell Design. Volume 3

DTIC Science & Technology

1990-06-01

power density and efficiency of an operating electrochemical system . The method is general - the examples to illustrate the selected points pertain to... System : Design, Manufacturing and QC Considerations), S. Szpak, P. A. Mosier-Boss, and J. J. Smith, 34th International Power Sources Symposium, Cherry...I) the computer time required to evaluate the integral in Eqn. Ill, and (iii the lack of generality in the attainable lineshapes. However, since this

Rational calculation accuracy in acousto-optical matrix-vector processor

NASA Astrophysics Data System (ADS)

Oparin, V. V.; Tigin, Dmitry V.

1994-01-01

The high speed of parallel computations for a comparatively small-size processor and acceptable power consumption makes the usage of acousto-optic matrix-vector multiplier (AOMVM) attractive for processing of large amounts of information in real time. The limited accuracy of computations is an essential disadvantage of such a processor. The reduced accuracy requirements allow for considerable simplification of the AOMVM architecture and the reduction of the demands on its components.

Don't ban PVC: incinerate and recycle it instead!

PubMed

Menke, Doris; Fiedler, Hiltrud; Zwahr, Heiner

2003-04-01

Plastics are making a growing contribution to sustainable development. For example, over an expected lifetime of 50 years, the use of window frames and insulating materials made of plastic in buildings save many times the energy required to manufacture them. Plastics for packaging purposes provide protection against damage and dirt contamination, thereby saving considerable amounts of material and energy. Choosing appropriate disposal strategies for plastic waste also helps to protect the environment (Mark 2000).

From bench to bar: careers in patent law for molecular biologists

PubMed Central

Machin, Nathan A.

2013-01-01

Leaving science to pursue a career in patent law requires a considerable investment of time and energy, and possibly money, with no guarantee of finding a job or of returning to science should the decision prove infelicitous. Yet the large number of former scientists now practicing patent law shows that it can be done. I provide suggestions for investigating the potential opportunities, costs, risks, and rewards of this career path. PMID:23813843

Magnetic Flyer Facility Correlation and UGT Simulation

DTIC Science & Technology

1978-05-01

AND UGT SIMULATION (U) Kaman Sciences Corporation L ~ P.O. Box 7463 I Colorado Springs, Colcerado 80933 ý4 May 1978DC Final Report CONTRACT No. DNA O01...selected underground test ( UGT ) environment on 3DQP; and, (2) To correlate the magnetically driven flyer plate facilities of VKSC with those of the...tailored to matcb the pressure vs. time anid total impulse measurements obtained on UGT events. This matching of experi- mental data required considerable

The “Anthropocene” epoch: Scientific decision or political statement?

USGS Publications Warehouse

Finney, Stanley C.; Edwards, Lucy E.

2016-01-01

The proposal for the “Anthropocene” epoch as a formal unit of the geologic time scale has received extensive attention in scientific and public media. However, most articles on the Anthropocene misrepresent the nature of the units of the International Chronostratigraphic Chart, which is produced by the International Commission on Stratigraphy (ICS) and serves as the basis for the geologic time scale. The stratigraphic record of the Anthropocene is minimal, especially with its recently proposed beginning in 1945; it is that of a human lifespan, and that definition relegates considerable anthropogenic change to a “pre-Anthropocene.” The utility of the Anthropocene requires careful consideration by its various potential users. Its concept is fundamentally different from the chronostratigraphic units that are established by ICS in that the documentation and study of the human impact on the Earth system are based more on direct human observation than on a stratigraphic record. The drive to officially recognize the Anthropocene may, in fact, be political rather than scientific.

A Search for Transits of Proxima b in MOST Photometry

NASA Astrophysics Data System (ADS)

Kipping, David M.

2017-01-01

The recent discovery of a potentially rocky planet in the habitable-zone of our nearest star presents exciting prospects for future detailed characterization of another world. If Proxima b transits its star, the road to characterization would be considerably eased. In 2014 and 2015, we monitored Proxima Centauri with the Canadian space telescope MOST for a total of 43 days. As expected, the star presents considerable photometric variability due to flares, which greatly complicate our analysis. Using Gaussian process regression and Bayesian model selection with informative priors for the time of transit of Proxima b, we do find evidence for a transit of the expected depth. However, relaxing the prior on the transit time to an uninformative one returns a distinct solution highlighting the high false-positive rate induced by flaring. Using ground-based photometry from HATSouth, we show that our candidate transit is unlikely to be genuine although a conclusive answer will likely require infrared photometry, such as that from Spitzer, where flaring should be suppressed.

[Ethical considerations in mass casualty situation].

PubMed

Priel, I E; Dolev, E

2001-07-01

Mass casualty is a situation, in which, the physician is compelled to make critical decisions under heavy pressure load, due to severe shortage in time, personnel and information. This task is extremely difficult to fulfill, as the physician has to consider not only professional tools, but needs also to utilize ethical principles, in order to provide the best possible care to most of the casualties who might benefit from it. By definition, in the mass casualty situation the medical facility lacks temporarily the ability to deliver effective therapy to all, as the injured outnumber the medical capacity for a given time. The ethical conflicts and dilemmas that arise during such an event are enormous. Amazingly, only a few articles have addressed the issue of ethical considerations during mass casualty situation. Ethical decision making is based on four principles: beneficence, nonmaleficence, autonomy and justice. Compassion, trustworthiness, discernment and integrity are the four qualities required from those practicing medicine. These virtues should be manifested in mass casualty situations, one of the most demanding situations a physician may face.

Design Considerations for Developing Biodegradable Magnesium Implants

NASA Astrophysics Data System (ADS)

Brar, Harpreet S.; Keselowsky, Benjamin G.; Sarntinoranont, Malisa; Manuel, Michele V.

The integration of biodegradable and bioabsorbable magnesium implants into the human body is a complex undertaking that faces major challenges. The complexity arises from the fact that biomaterials must meet both engineering and physiological requirements to ensure the desired properties. Historically, efforts have been focused on the behavior of commercial magnesium alloys in biological environments and their resultant effect on cell-mediated processes. Developing causal relationships between alloy chemistry and micro structure, and its effect on cellular behavior can be a difficult and time intensive process. A systems design approach driven by thermodynamics has the power to provide significant contributions in developing the next generation of magnesium alloy implants with controlled degradability, biocompatibility, and optimized mechanical properties, at reduced time and cost. This approach couples experimental research with theory and mechanistic modeling for the accelerated development of materials. The aim of this article is to enumerate this strategy, design considerations and hurdles for developing new magnesium alloys for use as biodegradable implant materials [1].

Considerations In The Design And Specifications Of An Automatic Inspection System

NASA Astrophysics Data System (ADS)

Lee, David T.

1980-05-01

Considerable activities have been centered around the automation of manufacturing quality control and inspection functions. Several reasons can be cited for this development. The continuous pressure of direct and indirect labor cost increase is only one of the obvious motivations. With the drive for electronics miniaturization come more and more complex processes where control parameters are critical and the yield is highly susceptible to inadequate process monitor and inspection. With multi-step, multi-layer process for substrate fabrication, process defects that are not detected and corrected at certain critical points may render the entire subassembly useless. As a process becomes more complex, the time required to test the product increases significantly in the total build cycle. The urgency to reduce test time brings more pressure to improve in-process control and inspection. The advances and improvements of components, assemblies and systems such as micro-processors, micro-computers, programmable controllers, and other intelligent devices, have made the automation of quality control much more cost effective and justifiable.

Considerations in change management related to technology.

PubMed

Luo, John S; Hilty, Donald M; Worley, Linda L; Yager, Joel

2006-01-01

The authors describe the complexity of social processes for implementing technological change. Once a new technology is available, information about its availability and benefits must be made available to the community of users, with opportunities to try the innovations and find them worthwhile, despite organizational resistances. The authors reviewed the literature from psychiatry, psychology, sociology, business, and technology to distill common denominators for success and failure related to implementing technology. Beneficial technological innovations that are simple to use and obviously save everyone time and effort are easy to inaugurate. However, innovations that primarily serve management rather than subordinates or front-line utilizers may fail, despite considerable institutional effort. This article reviews and outlines several of the more prominent theoretical models governing successful institutional change. Successful implementation of difficult technological changes requires visionary leadership that has carefully considered the benefits, consulted with influence leaders at all organizational levels to spot unintended consequences and sources of resistance, and developed a detailed plan and continuous quality assurance process to foster implementation over time.

ATHENA: system studies and optics accommodation

NASA Astrophysics Data System (ADS)

Ayre, M.; Bavdaz, M.; Ferreira, I.; Wille, E.; Fransen, S.; Stefanescu, A.; Linder, M.

2016-07-01

ATHENA is currently in Phase A, with a view to adoption upon a successful Mission Adoption Review in 2019/2020. After a brief presentation of the reference spacecraft (SC) design, this paper will focus on the functional and environmental requirements, the thermo-mechanical design and the Assembly, Integration, Verification & Test (AIVT) considerations related to housing the Silicon Pore Optics (SPO) Mirror Modules (MM) in the very large Mirror Assembly Module (MAM). Initially functional requirements on the MM accommodation are presented, with the Effective Area and Half Energy Width (HEW) requirements leading to a MAM comprising (depending on final mirror size selected) between 700-1000 MMs, co-aligned with exquisite accuracy to provide a common focus. A preliminary HEW budget allocated across the main error-contributors is presented, and this is then used as a reference to derive subsequent requirements and engineering considerations, including: The procedures and technologies for MM-integration into the Mirror Structure (MS) to achieve the required alignment accuracies in a timely manner; stiffness requirements and handling scheme required to constrain deformation under gravity during x-ray testing; temperature control to constrain thermo-elastic deformation during flight; and the role of the Instrument Switching Mechanism (ISM) in constraining HEW and Effective Area errors. Next, we present the key environmental requirements of the MMs, and the need to minimise shock-loading of the MMs is stressed. Methods to achieve this Ø are presented, including: Selection of a large clamp-band launch vehicle interface (LV I/F); lengthening of the shock-path from the LV I/F to the MAM I/F; modal-tuning of the MAM to act as a low-pass filter during launch shock events; use of low-shock HDRMs for the MAM; and the possibility to deploy a passive vibration solution at the LV I/F to reduce loads.

Practical use of a word processor in a histopathology laboratory.

PubMed Central

Briggs, J C; Ibrahim, N B; Mackintosh, I; Norris, D

1982-01-01

Some of the facilities available with a commercially purchased word processing program, linked to a DEC PDP 11/23 computer are described, together with an account of the practical histopathological use. The system is based on a share of the computer with a Clinical Chemistry Department. Development was time-consuming and required the constant availability of the Department of Physics. However, once working, considerable saving in secretarial time has resulted and a number of projects have been started which would not have been contemplated without the use of the word processor and its linked computer. Images PMID:7068906

Evaluation of the advantageous anesthetic properties of dexmedetomidine used as hypotensive agent compared with nitroglycerin in orthognathic surgery.

PubMed

Rummasak, Duangdee; Apipan, Benjamas

2014-12-01

To evaluate the advantageous anesthetic properties, such as the decrease of intraoperative analgesic requirement, time to extubation and recovery, and early postoperative pain, of dexmedetomidine used as hypotensive agent compared with nitroglycerin in orthognathic surgery. The authors implemented a prospective, single-blinded, randomized clinical trial. The sample was composed of healthy patients who were admitted for bimaxillary osteotomies and were assigned to 1 of 2 groups by a computer-generated random number and blinded to the group. Dexmedetomidine or nitroglycerin was used as the hypotensive drug for each group. All patients underwent hypotensive anesthesia and surgery according to standard protocol. Intraoperative amount of fentanyl, time to eye opening, time to follow basic verbal commands, time to extubation, early postoperative pain scores, and analgesics were recorded. Compared means were analyzed using the unpaired Student t test. A 2-sided statistical test was used. A P value less than .05 was considered significant. The sample was composed of 40 participants. The intraoperative fentanyl requirement was significantly lower in the dexmedetomidine group than in the nitroglycerin group (168.75±56.29 and 222.50±96.12 μg, respectively; P=.037). Times to eye opening and following commands were considerably longer in the dexmedetomidine group, but the time to extubation showed no meaningful difference. Early postoperative pain after 30 and 60 minutes and the requirement for meperidine were not meaningfully different between the 2 groups. Dexmedetomidine, used as a hypotensive drug, has anesthetic benefits compared with nitroglycerin. Dexmedetomidine decreases the intraoperative fentanyl requirement and does not meaningfully change the time to extubation, early postoperative pain, and analgesic drug requirement. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Experimental investigation of drying characteristics of cornelian cherry fruits ( Cornus mas L.)

NASA Astrophysics Data System (ADS)

Ozgen, Filiz

2015-03-01

Major target of present paper is to investigate the drying kinetics of cornelian cherry fruits ( Cornus mas L.) in a convective dryer, by varying the temperature and the velocity of drying air. Freshly harvested fruits are dried at drying air temperature of 35, 45 and 55 °C. The considered drying air velocities are V air = 1 and 1.5 m/s for each temperature. The required drying time is determined by taking into consideration the moisture ratio measurements. When the moisture ratio reaches up to 10 % at the selected drying air temperature, then the time is determined ( t = 40-67 h). The moisture ratio, fruit temperature and energy requirement are presented as the functions of drying time. The lowest drying time (40 h) is obtained when the air temperature is 55 °C and air velocity is 1.5 m/s. The highest drying time (67 h) is found under the conditions of 35 °C temperature and 1 m/s velocity. Both the drying air temperature and the air velocity significantly affect the required energy for drying system. The minimum amount of required energy is found as 51.12 kWh, at 55 °C and 1 m/s, whilst the maximum energy requirement is 106.7 kWh, at 35 °C and 1.5 m/s. It is also found that, air temperature significantly influences the total drying time. Moreover, the energy consumption is decreasing with increasing air temperature. The effects of three parameters (air temperature, air velocity and drying time) on drying characteristics have also been analysed by means of analysis of variance method to show the effecting levels. The experimental results have a good agreement with the predicted ones.

Modular thermal analyzer routine, volume 1

NASA Technical Reports Server (NTRS)

Oren, J. A.; Phillips, M. A.; Williams, D. R.

1972-01-01

The Modular Thermal Analyzer Routine (MOTAR) is a general thermal analysis routine with strong capabilities for performing thermal analysis of systems containing flowing fluids, fluid system controls (valves, heat exchangers, etc.), life support systems, and thermal radiation situations. Its modular organization permits the analysis of a very wide range of thermal problems for simple problems containing a few conduction nodes to those containing complicated flow and radiation analysis with each problem type being analyzed with peak computational efficiency and maximum ease of use. The organization and programming methods applied to MOTAR achieved a high degree of computer utilization efficiency in terms of computer execution time and storage space required for a given problem. The computer time required to perform a given problem on MOTAR is approximately 40 to 50 percent that required for the currently existing widely used routines. The computer storage requirement for MOTAR is approximately 25 percent more than the most commonly used routines for the most simple problems but the data storage techniques for the more complicated options should save a considerable amount of space.

Consideration of drainage ditches and sediment rating cure on SWAT model performance

USDA-ARS?s Scientific Manuscript database

Water quality models most often require a considerable amount of data to be properly configured and in some cases this requires additional procedural steps prior to model applications. We examined two different scenarios of such input issues in a small watershed using the Soil and Water Assessment ...

Advanced extravehicular activity systems requirements definition study. Phase 2: Extravehicular activity at a lunar base

NASA Technical Reports Server (NTRS)

Neal, Valerie; Shields, Nicholas, Jr.; Carr, Gerald P.; Pogue, William; Schmitt, Harrison H.; Schulze, Arthur E.

1988-01-01

The focus is on Extravehicular Activity (EVA) systems requirements definition for an advanced space mission: remote-from-main base EVA on the Moon. The lunar environment, biomedical considerations, appropriate hardware design criteria, hardware and interface requirements, and key technical issues for advanced lunar EVA were examined. Six remote EVA scenarios (three nominal operations and three contingency situations) were developed in considerable detail.

Low-Cost Rapid Usability Testing: Its Application in Both Product Development and System Implementation.

PubMed

Kushniruk, Andre; Borycki, Elizabeth

2017-01-01

In recent years there has been considerable discussion around the need for certification and regulation of healthcare information technology (IT). In particular, the usability of the products being developed needs to be evaluated. This has included the application of standards designed to ensure the process of system development is user-centered and takes usability into consideration while a product is being developed. In addition to this, in healthcare, organizations in the United States and Europe have also addressed the need and requirement for product certification. However, despite these efforts there are continued reports of unusable and unsafe implementations. In this paper we discuss the need to not only include (and require) usability testing in the one-time development process of health IT products (such as EHRs), but we also argue for the need to additionally develop specific usability standards and requirements for usability testing during the implementation of vendor products (i.e. post product development) in healthcare settings. It is further argued that health IT products that may have been certified regarding their development process will still require application of usability testing in the process of implementing them in real hospital settings in order to ensure usability and safety. This is needed in order to ensure that the final result of both product development and implementation processes take into account and apply the latest usability principles and methods.

Active learning based segmentation of Crohns disease from abdominal MRI.

PubMed

Mahapatra, Dwarikanath; Vos, Franciscus M; Buhmann, Joachim M

2016-05-01

This paper proposes a novel active learning (AL) framework, and combines it with semi supervised learning (SSL) for segmenting Crohns disease (CD) tissues from abdominal magnetic resonance (MR) images. Robust fully supervised learning (FSL) based classifiers require lots of labeled data of different disease severities. Obtaining such data is time consuming and requires considerable expertise. SSL methods use a few labeled samples, and leverage the information from many unlabeled samples to train an accurate classifier. AL queries labels of most informative samples and maximizes gain from the labeling effort. Our primary contribution is in designing a query strategy that combines novel context information with classification uncertainty and feature similarity. Combining SSL and AL gives a robust segmentation method that: (1) optimally uses few labeled samples and many unlabeled samples; and (2) requires lower training time. Experimental results show our method achieves higher segmentation accuracy than FSL methods with fewer samples and reduced training effort. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Germ plasm anchoring is a dynamic state that requires persistent trafficking.

PubMed

Sinsimer, Kristina S; Lee, Jack J; Thiberge, Stephan Y; Gavis, Elizabeth R

2013-12-12

Localized cytoplasmic determinants packaged as ribonucleoprotein (RNP) particles direct embryonic patterning and cell fate specification in a wide range of organisms. Once established, the asymmetric distributions of such RNP particles must be maintained, often over considerable developmental time. A striking example is the Drosophila germ plasm, which contains RNP particles whose localization to the posterior of the egg during oogenesis results in their asymmetric inheritance and segregation of germline from somatic fates in the embryo. Although actin-based anchoring mechanisms have been implicated, high-resolution live imaging revealed persistent trafficking of germ plasm RNP particles at the posterior cortex of the Drosophila oocyte. This motility relies on cortical microtubules, is mediated by kinesin and dynein motors, and requires coordination between the microtubule and actin cytoskeletons. Finally, we show that RNP particle motility is required for long-term germ plasm retention. We propose that anchoring is a dynamic state that renders asymmetries robust to developmental time and environmental perturbations. Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.

In orbit adiabatic demagnetization refrigeration for bolometric and microcalorimetric detectors

NASA Astrophysics Data System (ADS)

Hepburn, I. D.; Ade, P. A. R.; Davenport, I.; Smith, A.; Sumner, T. J.

1992-12-01

The new generation of photon detectors for satellite based mm/submm and X-ray astronomical observations require cooling to temperatures in the range 60 to 300 mK. At present Adiabatic Demagnetization Refrigeration (ADR) is the best proposed technique for producing these temperatures in orbit due to its inherent simplicity and gravity independent operation. For the efficient utilization of an ADR it is important to realize long operational times at base temperature with short recycle times. These criteria are dependent on several parameters; the required operating temperature, the cryogen bath temperature, the amount of heat leakage to the paramagnetic salt, the volume and type of salt and the maximum obtainable magnetic field. For space application these parameters are restricted by the limitations imposed on the physical size, the mass, the available electrical power and the cooling power available. The design considerations required in order to match these parameters are described and test data from a working laboratory system is presented.

Software beamforming: comparison between a phased array and synthetic transmit aperture.

PubMed

Li, Yen-Feng; Li, Pai-Chi

2011-04-01

The data-transfer and computation requirements are compared between software-based beamforming using a phased array (PA) and a synthetic transmit aperture (STA). The advantages of a software-based architecture are reduced system complexity and lower hardware cost. Although this architecture can be implemented using commercial CPUs or GPUs, the high computation and data-transfer requirements limit its real-time beamforming performance. In particular, transferring the raw rf data from the front-end subsystem to the software back-end remains challenging with current state-of-the-art electronics technologies, which offset the cost advantage of the software back end. This study investigated the tradeoff between the data-transfer and computation requirements. Two beamforming methods based on a PA and STA, respectively, were used: the former requires a higher data transfer rate and the latter requires more memory operations. The beamformers were implemente;d in an NVIDIA GeForce GTX 260 GPU and an Intel core i7 920 CPU. The frame rate of PA beamforming was 42 fps with a 128-element array transducer, with 2048 samples per firing and 189 beams per image (with a 95 MB/frame data-transfer requirement). The frame rate of STA beamforming was 40 fps with 16 firings per image (with an 8 MB/frame data-transfer requirement). Both approaches achieved real-time beamforming performance but each had its own bottleneck. On the one hand, the required data-transfer speed was considerably reduced in STA beamforming, whereas this required more memory operations, which limited the overall computation time. The advantages of the GPU approach over the CPU approach were clearly demonstrated.

Radar studies of arctic ice and development of a real-time Arctic ice type identification system

NASA Technical Reports Server (NTRS)

Rouse, J. W., Jr.; Schell, J. A.; Permenter, J. A.

1973-01-01

Studies were conducted to develop a real-time Arctic ice type identification system. Data obtained by NASA Mission 126, conducted at Pt. Barrow, Alaska (Site 93) in April 1970 was analyzed in detail to more clearly define the major mechanisms at work affecting the radar energy illuminating a terrain cell of sea ice. General techniques for reduction of the scatterometer data to a form suitable for application of ice type decision criteria were investigated, and the electronic circuit requirements for implementation of these techniques were determined. Also, consideration of circuit requirements are extended to include the electronics necessary for analog programming of ice type decision algorithms. After completing the basic circuit designs a laboratory model was constructed and a preliminary evaluation performed. Several system modifications for improved performance are suggested. (Modified author abstract)

Aging and Attentional Control

PubMed Central

Tsang, Pamela S.

2013-01-01

The research examines the structural bottleneck account and the resource account of the substantial dual-task deficits among older adults. Procedures from two common dual-task methodologies--the psychological refractory period and the relative-priority manipulation--were used to encourage maximization of the joint performance. Performance and time-sharing strategies from subjects between the ages of 20 and 70 were examined. Age-related declines in time-sharing efficiency and in the precision of the executive control process were observed. The age-related effect was larger when two manual responses were required than when one manual and one vocal response were required but no evidence for obligatory sequential processing was found. Except for the most demanding conditions, comparable practice effects were observed between the younger and older subjects, suggesting considerable cognitive plasticity in the older subjects. Implications for the two attentional accounts were discussed. PMID:23281799

Towards Supervising Remote Dexterous Robots Across Time Delay

NASA Technical Reports Server (NTRS)

Hambuchen, Kimberly; Bluethmann, William; Goza, Michael; Ambrose, Robert; Wheeler, Kevin; Rabe, Ken

2006-01-01

The President s Vision for Space Exploration, laid out in 2004, relies heavily upon robotic exploration of the lunar surface in early phases of the program. Prior to the arrival of astronauts on the lunar surface, these robots will be required to be controlled across space and time, posing a considerable challenge for traditional telepresence techniques. Because time delays will be measured in seconds, not minutes as is the case for Mars Exploration, uploading the plan for a day seems excessive. An approach for controlling dexterous robots under intermediate time delay is presented, in which software running within a ground control cockpit predicts the intention of an immersed robot supervisor, then the remote robot autonomously executes the supervisor s intended tasks. Initial results are presented.

Design and analysis considerations for deployment mechanisms in a space environment

NASA Technical Reports Server (NTRS)

Vorlicek, P. L.; Gore, J. V.; Plescia, C. T.

1982-01-01

On the second flight of the INTELSAT V spacecraft the time required for successful deployment of the north solar array was longer than originally predicted. The south solar array deployed as predicted. As a result of the difference in deployment times a series of experiments was conducted to locate the cause of the difference. Deployment rate sensitivity to hinge friction and temperature levels was investigated. A digital computer simulation of the deployment was created to evaluate the effects of parameter changes on deployment. Hinge design was optimized for nominal solar array deployment time for future INTELSAT V satellites. The nominal deployment times of both solar arrays on the third flight of INTELSAT V confirms the validity of the simulation and design optimization.

Signal and background considerations for the MRSt on the National Ignition Facility (NIF)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wink, C. W., E-mail: cwink@mit.edu; Frenje, J. A.; Gatu Johnson, M.

2016-11-15

A Magnetic Recoil Spectrometer (MRSt) has been conceptually designed for time-resolved measurements of the neutron spectrum at the National Ignition Facility. Using the MRSt, the goals are to measure the time-evolution of the spectrum with a time resolution of ∼20-ps and absolute accuracy better than 5%. To meet these goals, a detailed understanding and optimization of the signal and background characteristics are required. Through ion-optics, MCNP simulations, and detector-response calculations, it is demonstrated that the goals and a signal-to background >5–10 for the down-scattered neutron measurement are met if the background, consisting of ambient neutrons and gammas, at the MRStmore » is reduced 50–100 times.« less

Signal and background considerations for the MRSt on the National Ignition Facility (NIF)

DOE PAGES

Wink, C. W.; Frenje, J. A.; Hilsabeck, T. J.; ...

2016-08-03

A Magnetic Recoil Spectrometer (MRSt) has been conceptually designed for time-resolved measurements of the neutron spectrum at the National Ignition Facility. Using the MRSt, the goals are to measure the time-evolution of the spectrum with a time resolution of ~20-ps and absolute accuracy better than 5%. To meet these goals, a detailed understanding and optimization of the signal and background characteristics are required. Through ion-optics, MCNP simulations, and detector-response calculations, we demonstrate that the goals and a signal-to background >5-10 for the down-scattered neutron measurement are met if the background, consisting of ambient neutrons and gammas, at the MRSt ismore » reduced 50-100 times.« less

Commentary: Missing the elephant in my office: recommendations for part-time careers in academic medicine.

PubMed

Helitzer, Deborah

2009-10-01

Several recent articles in this journal, including the article by Linzer and colleagues in this issue, discuss and promote the concept of part-time careers in academic medicine as a solution to the need to achieve a work-life balance and to address the changing demographics of academic medicine. The article by Linzer and colleagues presents the consensus of a task force that attempted to address practical considerations for part-time work in academic internal medicine. Missing from these discussions, however, are a consensus on the definition of part-time work, consideration of how such strategies would be available to single parents, how time or resources will be allocated to part-time faculty to participate in professional associations, develop professional networks, and maintain currency in their field, and how part-time work can allow for the development of expertise in research and scholarly activity. Most important, the discussions about the part-time solution do not address the root cause of dissatisfaction and attrition: the ever-increasing and unsustainable workload of full-time faculty. The realization that an academic full-time career requires a commitment of 80 hours per week begs the question of whether part-time faculty would agree to work 40 hours a week for part-time pay. The historical underpinnings of the current situation, the implications of part-time solutions for the academy, and the consequences of choosing part-time work as the primary solution are discussed. Alternative strategies for addressing some of the problems facing full-time faculty are proposed.

Guidance for laboratories performing molecular pathology for cancer patients.

PubMed

Cree, Ian A; Deans, Zandra; Ligtenberg, Marjolijn J L; Normanno, Nicola; Edsjö, Anders; Rouleau, Etienne; Solé, Francesc; Thunnissen, Erik; Timens, Wim; Schuuring, Ed; Dequeker, Elisabeth; Murray, Samuel; Dietel, Manfred; Groenen, Patricia; Van Krieken, J Han

2014-11-01

Molecular testing is becoming an important part of the diagnosis of any patient with cancer. The challenge to laboratories is to meet this need, using reliable methods and processes to ensure that patients receive a timely and accurate report on which their treatment will be based. The aim of this paper is to provide minimum requirements for the management of molecular pathology laboratories. This general guidance should be augmented by the specific guidance available for different tumour types and tests. Preanalytical considerations are important, and careful consideration of the way in which specimens are obtained and reach the laboratory is necessary. Sample receipt and handling follow standard operating procedures, but some alterations may be necessary if molecular testing is to be performed, for instance to control tissue fixation. DNA and RNA extraction can be standardised and should be checked for quality and quantity of output on a regular basis. The choice of analytical method(s) depends on clinical requirements, desired turnaround time, and expertise available. Internal quality control, regular internal audit of the whole testing process, laboratory accreditation, and continual participation in external quality assessment schemes are prerequisites for delivery of a reliable service. A molecular pathology report should accurately convey the information the clinician needs to treat the patient with sufficient information to allow for correct interpretation of the result. Molecular pathology is developing rapidly, and further detailed evidence-based recommendations are required for many of the topics covered here. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Manned Mars flyby mission and configuration concept

NASA Technical Reports Server (NTRS)

Young, Archie; Meredith, Ollie; Brothers, Bobby

1986-01-01

A concept is presented for a flyby mission of the planet. The mission was sized for the 2001 time period, has a crew of three, uses all propulsive maneuvers, and requires 442 days. Such a flyby mission results in significantly smaller vehicles than would a landing mission, but of course loses the value of the landing and the associated knowledge and prestige. Stay time in the planet vicinity is limited to the swingby trajectory but considerable time still exists for enroute science and research experiments. All propulsive braking was used in the concept due to unacceptable g-levels associated with aerobraking on this trajectory. LEO departure weight for the concept is approximately 594,000 pounds.

Solar array study for solar electric propulsion spacecraft for the Encke rendezvous mission

NASA Technical Reports Server (NTRS)

Sequeira, E. A.; Patterson, R. E.

1974-01-01

The work is described which was performed on the design, analysis and performance of a 20 kW rollup solar array capable of meeting the design requirements of a solar electric spacecraft for the 1980 Encke rendezvous mission. To meet the high power requirements of the proposed electric propulsion mission, solar arrays on the order of 186.6 sq m were defined. Because of the large weights involved with arrays of this size, consideration of array configurations is limited to lightweight, large area concepts with maximum power-to-weight ratios. Items covered include solar array requirements and constraints, array concept selection and rationale, structural and electrical design considerations, and reliability considerations.

47 CFR 73.3561 - Staff consideration of applications requiring Commission action.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false Staff consideration of applications requiring...) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Rules Applicable to All Broadcast Stations § 73.3561 Staff... is reviewed by the staff and, except where the application is acted upon by the staff pursuant to...

47 CFR 73.3561 - Staff consideration of applications requiring Commission action.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false Staff consideration of applications requiring...) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Rules Applicable to All Broadcast Stations § 73.3561 Staff... is reviewed by the staff and, except where the application is acted upon by the staff pursuant to...

47 CFR 73.3561 - Staff consideration of applications requiring Commission action.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Staff consideration of applications requiring...) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Rules Applicable to All Broadcast Stations § 73.3561 Staff... is reviewed by the staff and, except where the application is acted upon by the staff pursuant to...

Quantum and electromagnetic propagation with the conjugate symmetric Lanczos method.

PubMed

Acevedo, Ramiro; Lombardini, Richard; Turner, Matthew A; Kinsey, James L; Johnson, Bruce R

2008-02-14

The conjugate symmetric Lanczos (CSL) method is introduced for the solution of the time-dependent Schrodinger equation. This remarkably simple and efficient time-domain algorithm is a low-order polynomial expansion of the quantum propagator for time-independent Hamiltonians and derives from the time-reversal symmetry of the Schrodinger equation. The CSL algorithm gives forward solutions by simply complex conjugating backward polynomial expansion coefficients. Interestingly, the expansion coefficients are the same for each uniform time step, a fact that is only spoiled by basis incompleteness and finite precision. This is true for the Krylov basis and, with further investigation, is also found to be true for the Lanczos basis, important for efficient orthogonal projection-based algorithms. The CSL method errors roughly track those of the short iterative Lanczos method while requiring fewer matrix-vector products than the Chebyshev method. With the CSL method, only a few vectors need to be stored at a time, there is no need to estimate the Hamiltonian spectral range, and only matrix-vector and vector-vector products are required. Applications using localized wavelet bases are made to harmonic oscillator and anharmonic Morse oscillator systems as well as electrodynamic pulse propagation using the Hamiltonian form of Maxwell's equations. For gold with a Drude dielectric function, the latter is non-Hermitian, requiring consideration of corrections to the CSL algorithm.

Who You Gonna Call? Responding to a Medical Emergency with the Strategic National Stockpile

DTIC Science & Technology

2004-06-01

pharmaceuticals. The logistical burden on the local and state responders who receive, dispense, and distribute the SNS is considerable. The time and...bulk drugs in the SNS are repackaged on- site , the labeling machines that accompany each of the push packs can be programmed to provide the required...burden on local responders , who already will be facing a significant task in dispensing the SNS materiel to a (potentially) large affected population

Debris Removal: An Opportunity for Cooperative Research?

NASA Technical Reports Server (NTRS)

Johnson, Nicholas L.

2007-01-01

Space debris mitigation practices will be insufficient to prevent the continued growth of the Earth satellite population. Removal of orbital debris can improve the reliability of present and future space systems. The challenges of developing an effective, affordable debris removal capability are considerable. The time is right for a new look at space remediation concepts. In concert with or following the current IAA study An international approach to the remediation of the near-Earth space environment will likely be required.

Optimizing chirped laser pulse parameters for electron acceleration in vacuum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akhyani, Mina; Jahangiri, Fazel; Niknam, Ali Reza

2015-11-14

Electron dynamics in the field of a chirped linearly polarized laser pulse is investigated. Variations of electron energy gain versus chirp parameter, time duration, and initial phase of laser pulse are studied. Based on maximizing laser pulse asymmetry, a numerical optimization procedure is presented, which leads to the elimination of rapid fluctuations of gain versus the chirp parameter. Instead, a smooth variation is observed that considerably reduces the accuracy required for experimentally adjusting the chirp parameter.

Status Report On Preparation of a Revised Longwave Communication Link Vulnerability Code.

DTIC Science & Technology

1981-10-01

Gallery or Earth-Detached) .J.J Cc) ONE ) E BOVTH ANDENA O EVOUDATENN (EE-G GE d.𔄀, (c) O (d) BOVTHbAD GROUND ANTENN (-G - Figre3.Ilusrain te osibl snge...shows simplified flow diagrams for the ionization models re- quired for LOS and ionospheric dependent propagation calculations. The time loop could be...placed outside the path loop for ionospheric dependent propagation but this requires considerable storage in order to perform nonequilibrium ionization

Transition of Care from Childhood to Adulthood: Turner Syndrome.

PubMed

Conway, Gerard

2018-01-01

Girls with Turner syndrome (TS) require special consideration during transition from childhood to adult care. During the transition years, treatment for short stature will be completed and sexual development induced in parallel with the peer group. The timing of sexual development may have later repercussions with respect to psychosocial development and partnership status. Late presentation of TS, which is so common, can result in additional difficulties with the transition process. © 2018 S. Karger AG, Basel.

Regulatory Aspects of Optical Methods and Exogenous Targets for Cancer Detection

PubMed Central

Tummers, Willemieke S.; Warram, Jason M.; Tipirneni, Kiranya E.; Fengler, John; Jacobs, Paula; Shankar, Lalitha; Henderson, Lori; Ballard, Betsy; Pogue, Brian W.; Weichert, Jamey P.; Bouvet, Michael; Sorger, Jonathan; Contag, Christopher H.; Frangioni, John V.; Tweedle, Michael F.; Basilion, James P.; Gambhir, Sanjiv S.; Rosenthal, Eben L.

2017-01-01

Considerable advances in cancer-specific optical imaging have improved the precision of tumor resection. In comparison to traditional imaging modalities, this technology is unique in its ability to provide real-time feedback to the operating surgeon. Given the significant clinical implications of optical imaging, there is an urgent need to standardize surgical navigation tools and contrast agents to facilitate swift regulatory approval. Because fluorescence-enhanced surgery requires a combination of both device and drug, each may be developed in conjunction, or separately, which are important considerations in the approval process. This report is the result of a one-day meeting held on May 4, 2016 with officials from the National Cancer Institute, the FDA, members of the American Society of Image-Guided Surgery, and members of the World Molecular Imaging Society, which discussed consensus methods for FDA-directed human testing and approval of investigational optical imaging devices as well as contrast agents for surgical applications. The goal of this workshop was to discuss FDA approval requirements and the expectations for approval of these novel drugs and devices, packaged separately or in combination, within the context of optical surgical navigation. In addition, the workshop acted to provide clarity to the research community on data collection and trial design. Reported here are the specific discussion items and recommendations from this critical and timely meeting. PMID:28428283

Recent advances in technologies required for a "Salad Machine".

PubMed

Kliss, M; Heyenga, A G; Hoehn, A; Stodieck, L S

2000-01-01

Future long duration, manned space flight missions will require life support systems that minimize resupply requirements and ultimately approach self-sufficiency in space. Bioregenerative life support systems are a promising approach, but they are far from mature. Early in the development of the NASA Controlled Ecological Life Support System Program, the idea of onboard cultivation of salad-type vegetables for crew consumption was proposed as a first step away from the total reliance on resupply for food in space. Since that time, significant advances in space-based plant growth hardware have occurred, and considerable flight experience has been gained. This paper revisits the "Salad Machine" concept and describes recent developments in subsystem technologies for both plant root and shoot environments that are directly relevant to the development of such a facility.

A Flight Deck Decision Support Tool for Autonomous Airborne Operations

NASA Technical Reports Server (NTRS)

Ballin, Mark G.; Sharma, Vivek; Vivona, Robert A.; Johnson, Edward J.; Ramiscal, Ermin

2002-01-01

NASA is developing a flight deck decision support tool to support research into autonomous operations in a future distributed air/ground traffic management environment. This interactive real-time decision aid, referred to as the Autonomous Operations Planner (AOP), will enable the flight crew to plan autonomously in the presence of dense traffic and complex flight management constraints. In assisting the flight crew, the AOP accounts for traffic flow management and airspace constraints, schedule requirements, weather hazards, aircraft operational limits, and crew or airline flight-planning goals. This paper describes the AOP and presents an overview of functional and implementation design considerations required for its development. Required AOP functionality is described, its application in autonomous operations research is discussed, and a prototype software architecture for the AOP is presented.

Recent Advances in Technologies Required for a ``Salad Machine''

NASA Astrophysics Data System (ADS)

Kliss, M.; Heyenga, A. G.; Hoehn, A.; Stodieck, L. S.

Future long duration, manned space flight missions will require life support systems that minimize resupply requirements and ultimately approach self-sufficiency in space. Bioregenerative life support systems are a promising approach, but they are far from mature. Early in the development of the NASA Controlled Ecological Life Support System Program, the idea of onboard cultivation of salad-type vegetables for crew consumption was proposed as a first step away from the total reliance on resupply for food in space. Since that time, significant advances in space-based plant growth hardware have occurred, and considerable flight experience has been gained. This paper revisits the ``Salad Machine'' concept and describes recent developments in subsystem technologies for both plant root and shoot environments that are directly relevant to the development of such a facility

Synthesis of Conformal Phased Antenna Arrays With A Novel Multiobjective Invasive Weed Optimization Algorithm

NASA Astrophysics Data System (ADS)

Li, Wen Tao; Hei, Yong Qiang; Shi, Xiao Wei

2018-04-01

By virtue of the excellent aerodynamic performances, conformal phased arrays have been attracting considerable attention. However, for the synthesis of patterns with low/ultra-low sidelobes of the conventional conformal arrays, the obtained dynamic range ratios of amplitude excitations could be quite high, which results in stringent requirements on various error tolerances for practical implementation. Time-modulated array (TMA) has the advantages of low sidelobe and reduced dynamic range ratio requirement of amplitude excitations. This paper takes full advantages of conformal antenna arrays and time-modulated arrays. The active-element-pattern, including element mutual coupling and platform effects, is employed in the whole design process. To optimize the pulse durations and the switch-on instants of the time-modulated elements, multiobjective invasive weed optimization (MOIWO) algorithm based on the nondominated sorting of the solutions is proposed. A S-band 8-element cylindrical conformal array is designed and a S-band 16-element cylindrical-parabolic conformal array is constructed and tested at two different steering angles.

Design of an MR image processing module on an FPGA chip

NASA Astrophysics Data System (ADS)

Li, Limin; Wyrwicz, Alice M.

2015-06-01

We describe the design and implementation of an image processing module on a single-chip Field-Programmable Gate Array (FPGA) for real-time image processing. We also demonstrate that through graphical coding the design work can be greatly simplified. The processing module is based on a 2D FFT core. Our design is distinguished from previously reported designs in two respects. No off-chip hardware resources are required, which increases portability of the core. Direct matrix transposition usually required for execution of 2D FFT is completely avoided using our newly-designed address generation unit, which saves considerable on-chip block RAMs and clock cycles. The image processing module was tested by reconstructing multi-slice MR images from both phantom and animal data. The tests on static data show that the processing module is capable of reconstructing 128 × 128 images at speed of 400 frames/second. The tests on simulated real-time streaming data demonstrate that the module works properly under the timing conditions necessary for MRI experiments.

Prediction of sound radiated from different practical jet engine inlets

NASA Technical Reports Server (NTRS)

Zinn, B. T.; Meyer, W. L.

1980-01-01

Existing computer codes for calculating the far field radiation patterns surrounding various practical jet engine inlet configurations under different excitation conditions were upgraded. The computer codes were refined and expanded so that they are now more efficient computationally by a factor of about three and they are now capable of producing accurate results up to nondimensional wave numbers of twenty. Computer programs were also developed to help generate accurate geometrical representations of the inlets to be investigated. This data is required as input for the computer programs which calculate the sound fields. This new geometry generating computer program considerably reduces the time required to generate the input data which was one of the most time consuming steps in the process. The results of sample runs using the NASA-Lewis QCSEE inlet are presented and comparison of run times and accuracy are made between the old and upgraded computer codes. The overall accuracy of the computations is determined by comparison of the results of the computations with simple source solutions.

Two-Color Nonlinear Spectroscopy for the Rapid Acquisition of Coherent Dynamics.

PubMed

Senlik, S Seckin; Policht, Veronica R; Ogilvie, Jennifer P

2015-07-02

There has been considerable recent interest in the observation of coherent dynamics in photosynthetic systems by 2D electronic spectroscopy (2DES). In particular, coherences that persist during the "waiting time" in a 2DES experiment have been attributed to electronic, vibrational, and vibronic origins in various systems. The typical method for characterizing these coherent dynamics requires the acquisition of 2DES spectra as a function of waiting time, essentially a 3DES measurement. Such experiments require lengthy data acquisition times that degrade the signal-to-noise of the recorded coherent dynamics. We present a rapid and high signal-to-noise pulse-shaping-based approach for the characterization of coherent dynamics. Using chlorophyll a, we demonstrate that this method retains much of the information content of a 3DES measurement and provides insight into the physical origin of the coherent dynamics, distinguishing between ground and excited state coherences. It also enables high resolution determination of ground and excited state frequencies.

Design of an MR image processing module on an FPGA chip

PubMed Central

Li, Limin; Wyrwicz, Alice M.

2015-01-01

We describe the design and implementation of an image processing module on a single-chip Field-Programmable Gate Array (FPGA) for real-time image processing. We also demonstrate that through graphical coding the design work can be greatly simplified. The processing module is based on a 2D FFT core. Our design is distinguished from previously reported designs in two respects. No off-chip hardware resources are required, which increases portability of the core. Direct matrix transposition usually required for execution of 2D FFT is completely avoided using our newly-designed address generation unit, which saves considerable on-chip block RAMs and clock cycles. The image processing module was tested by reconstructing multi-slice MR images from both phantom and animal data. The tests on static data show that the processing module is capable of reconstructing 128 × 128 images at speed of 400 frames/second. The tests on simulated real-time streaming data demonstrate that the module works properly under the timing conditions necessary for MRI experiments. PMID:25909646

Annual Irrigation Dynamics in the U.S. Northern High Plains Derived from Landsat Satellite Data

NASA Astrophysics Data System (ADS)

Deines, Jillian M.; Kendall, Anthony D.; Hyndman, David W.

2017-09-01

Sustainable management of agricultural water resources requires improved understanding of irrigation patterns in space and time. We produced annual, high-resolution (30 m) irrigation maps for 1999-2016 by combining all available Landsat satellite imagery with climate and soil covariables in Google Earth Engine. Random forest classification had accuracies from 92 to 100% and generally agreed with county statistics (r2 = 0.88-0.96). Two novel indices that integrate plant greenness and moisture information show promise for improving satellite classification of irrigation. We found considerable interannual variability in irrigation location and extent, including a near doubling between 2002 and 2016. Statistical modeling suggested that precipitation and commodity price influenced irrigated extent through time. High prices incentivized expansion to increase crop yield and profit, but dry years required greater irrigation intensity, thus reducing area in this supply-limited region. Data sets produced with this approach can improve water sustainability by providing consistent, spatially explicit tracking of irrigation dynamics over time.

Poliovirus vaccination during the endgame: insights from integrated modeling.

PubMed

Duintjer Tebbens, Radboud J; Thompson, Kimberly M

2017-06-01

Managing the polio endgame requires access to sufficient quantities of poliovirus vaccines. After oral poliovirus vaccine (OPV) cessation, outbreaks may occur that require outbreak response using monovalent OPV (mOPV) and/or inactivated poliovirus vaccine. Areas covered: We review the experience and challenges with managing vaccine supplies in the context of the polio endgame. Building on models that explored polio endgame risks and the potential mOPV needs to stop outbreaks from live poliovirus reintroductions, we conceptually explore the potential demands for finished and bulk mOPV doses from a stockpile in the context of limited shelf-life of finished vaccine and time delays to convert bulk to finished vaccine. Our analysis suggests that the required size of the mOPV stockpile varies by serotype, with the highest expected needs for serotype 1 mOPV. Based on realizations of poliovirus risks after OPV cessation, the stockpile required to eliminate the chance of a stock-out appears considerably larger than the currently planned mOPV stockpiles. Expert commentary: The total required stockpile size depends on the acceptable probability of a stock-out, and increases with longer times to finish bulk doses and shorter shelf-lives of finished doses. Successful polio endgame management will require careful attention to poliovirus vaccine supplies.

Advanced EVA system design requirements study

NASA Technical Reports Server (NTRS)

Woods, T. G.

1988-01-01

The results are presented of a study to identify specific criteria regarding space station extravehicular activity system (EVAS) hardware requirements. Key EVA design issues include maintainability, technology readiness, LSS volume vs. EVA time available, suit pressure/cabin pressure relationship and productivity effects, crew autonomy, integration of EVA as a program resource, and standardization of task interfaces. A variety of DOD EVA systems issues were taken into consideration. Recommendations include: (1) crew limitations, not hardware limitations; (2) capability to perform all of 15 generic missions; (3) 90 days on-orbit maintainability with 50 percent duty cycle as minimum; and (4) use by payload sponsors of JSC document 10615A plus a Generic Tool Kit and Specialized Tool Kit description. EVA baseline design requirements and criteria, including requirements of various subsystems, are outlined. Space station/EVA system interface requirements and EVA accommodations are discussed in the areas of atmosphere composition and pressure, communications, data management, logistics, safe haven, SS exterior and interior requirements, and SS airlock.

Engineering and fabrication cost considerations for cryogenic wind tunnel models

NASA Technical Reports Server (NTRS)

Boykin, R. M., Jr.; Davenport, J. B., Jr.

1983-01-01

Design and fabrication cost drivers for cryogenic transonic wind tunnel models are defined. The major cost factors for wind tunnel models are model complexity, tolerances, surface finishes, materials, material validation, and model inspection. The cryogenic temperatures require the use of materials with relatively high fracture toughness but at the same time high strength. Some of these materials are very difficult to machine, requiring extensive machine hours which can add significantly to the manufacturing costs. Some additional engineering costs are incurred to certify the materials through mechanical tests and nondestructive evaluation techniques, which are not normally required with conventional models. When instrumentation such as accelerometers and electronically scanned pressure modules is required, temperature control of these devices needs to be incorporated into the design, which requires added effort. Additional thermal analyses and subsystem tests may be necessary, which also adds to the design costs. The largest driver to the design costs is potentially the additional static and dynamic analyses required to insure structural integrity of the model and support system.

48 CFR 733.103-73 - Protests excluded from consideration.

Code of Federal Regulations, 2011 CFR

2011-10-01

... consideration. 733.103-73 Section 733.103-73 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT GENERAL CONTRACTING REQUIREMENTS PROTESTS, DISPUTES, AND APPEALS Protests 733.103-73 Protests excluded from consideration. (a) Contract administration. Disputes between a contractor and USAID are...

48 CFR 733.103-73 - Protests excluded from consideration.

Code of Federal Regulations, 2010 CFR

2010-10-01

... consideration. 733.103-73 Section 733.103-73 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT GENERAL CONTRACTING REQUIREMENTS PROTESTS, DISPUTES, AND APPEALS Protests 733.103-73 Protests excluded from consideration. (a) Contract administration. Disputes between a contractor and USAID are...

40 CFR 194.51 - Consideration of protected individual.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Consideration of protected individual. 194.51 Section 194.51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION... Individual and Ground-Water Protection Requirements § 194.51 Consideration of protected individual...

40 CFR 194.51 - Consideration of protected individual.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Consideration of protected individual. 194.51 Section 194.51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION... Individual and Ground-Water Protection Requirements § 194.51 Consideration of protected individual...

40 CFR 194.51 - Consideration of protected individual.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Consideration of protected individual. 194.51 Section 194.51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION... Individual and Ground-Water Protection Requirements § 194.51 Consideration of protected individual...

40 CFR 194.51 - Consideration of protected individual.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Consideration of protected individual. 194.51 Section 194.51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION... Individual and Ground-Water Protection Requirements § 194.51 Consideration of protected individual...

Deciduousness in a seasonal tropical forest in western Thailand: interannual and intraspecific variation in timing, duration and environmental cues.

PubMed

Williams, Laura J; Bunyavejchewin, Sarayudh; Baker, Patrick J

2008-03-01

Seasonal tropical forests exhibit a great diversity of leaf exchange patterns. Within these forests variation in the timing and intensity of leaf exchange may occur within and among individual trees and species, as well as from year to year. Understanding what generates this diversity of phenological behaviour requires a mechanistic model that incorporates rate-limiting physiological conditions, environmental cues, and their interactions. In this study we examined long-term patterns of leaf flushing for a large proportion of the hundreds of tree species that co-occur in a seasonal tropical forest community in western Thailand. We used the data to examine community-wide variation in deciduousness and tested competing hypotheses regarding the timing and triggers of leaf flushing in seasonal tropical forests. We developed metrics to quantify the nature of deciduousness (its magnitude, timing and duration) and its variability among survey years and across a range of taxonomic levels. Tree species varied widely in the magnitude, duration, and variability of leaf loss within species and across years. The magnitude of deciduousness ranged from complete crown loss to no crown loss. Among species that lost most of their crown, the duration of deciduousness ranged from 2 to 21 weeks. The duration of deciduousness in the majority of species was considerably shorter than in neotropical forests with similar rainfall periodicity. While the timing of leaf flushing varied among species, most ( approximately 70%) flushed during the dry season. Leaf flushing was associated with changes in photoperiod in some species and the timing of rainfall in other species. However, more than a third of species showed no clear association with either photoperiod or rainfall, despite the considerable length and depth of the dataset. Further progress in resolving the underlying internal and external mechanisms controlling leaf exchange will require targeting these species for detailed physiological and microclimatic studies.

Design and fabrication considerations for stainless steel liquid helium jackets surrounding SCRF cavities

NASA Astrophysics Data System (ADS)

Bonnema, E. C.; Cunningham, E. K.; Rumel, J. D.

2014-01-01

The Department of Energy requires its subcontractors to meet 10 CFR 851 Appendix A Part 4 for all new pressure vessels and pressure piping. The stainless steel pressure vessel boundaries surrounding SCRF cavities fall under this requirement. Methods for meeting this requirement include design and fabrication of the pressure vessels to meet the requirements of the ASME Boiler & Pressure Vessel Code Section VIII Division 1 or Division 2. Design considerations include determining whether the configuration of the SCRF cavity can be accommodated under the rules of Division 1 or must be analyzed under Division 2 Part 4 Design by Rule Requirements or Part 5 Design by Analysis Requirements. Regardless of the Division or Part choice, designers will find the rules of the ASME Code require thicker pressure boundary members, larger welds, and additional non-destructive testing and quality assurance requirements. These challenges must be met and overcome by the fabricator through the development of robust, detailed, and repeatable manufacturing processes. In this paper we discuss the considerations for stainless steel pressure vessels that must meet the ASME Code and illustrate the discussion with examples from direct experience fabricating such vessels.

Lift hysteresis at stall as an unsteady boundary-layer phenomenon

NASA Technical Reports Server (NTRS)

Moore, Franklin K

1956-01-01

Analysis of rotating stall of compressor blade rows requires specification of a dynamic lift curve for the airfoil section at or near stall, presumably including the effect of lift hysteresis. Consideration of the magnus lift of a rotating cylinder suggests performing an unsteady boundary-layer calculation to find the movement of the separation points of an airfoil fixed in a stream of variable incidence. The consideration of the shedding of vorticity into the wake should yield an estimate of lift increment proportional to time rate of change of angle of attack. This increment is the amplitude of the hysteresis loop. An approximate analysis is carried out according to the foregoing ideas for a 6:1 elliptic airfoil at the angle of attack for maximum lift. The assumptions of small perturbations from maximum lift are made, permitting neglect of distributed vorticity in the wake. The calculated hysteresis loop is counterclockwise. Finally, a discussion of the forms of hysteresis loops is presented; and, for small reduced frequency of oscillation, it is concluded that the concept of a viscous "time lag" is appropriate only for harmonic variations of angle of attack with time at mean conditions other than maximum lift.

Numerical simulations of short-mixing-time double-wave-vector diffusion-weighting experiments with multiple concatenations on whole-body MR systems

NASA Astrophysics Data System (ADS)

Finsterbusch, Jürgen

2010-12-01

Double- or two-wave-vector diffusion-weighting experiments with short mixing times in which two diffusion-weighting periods are applied in direct succession, are a promising tool to estimate cell sizes in the living tissue. However, the underlying effect, a signal difference between parallel and antiparallel wave vector orientations, is considerably reduced for the long gradient pulses required on whole-body MR systems. Recently, it has been shown that multiple concatenations of the two wave vectors in a single acquisition can double the modulation amplitude if short gradient pulses are used. In this study, numerical simulations of such experiments were performed with parameters achievable with whole-body MR systems. It is shown that the theoretical model yields a good approximation of the signal behavior if an additional term describing free diffusion is included. More importantly, it is demonstrated that the shorter gradient pulses sufficient to achieve the desired diffusion weighting for multiple concatenations, increase the signal modulation considerably, e.g. by a factor of about five for five concatenations. Even at identical echo times, achieved by a shortened diffusion time, a moderate number of concatenations significantly improves the signal modulation. Thus, experiments on whole-body MR systems may benefit from multiple concatenations.

Satellite orbit considerations for a global change technology architecture trade study

NASA Technical Reports Server (NTRS)

Harrison, Edwin F.; Gibson, Gary G.; Suttles, John T.; Buglia, James J.; Taback, Israel

1991-01-01

A study was conducted to determine satellite orbits for earth observation missions aimed at obtaining data for assessing data global climate change. A multisatellite system is required to meet the scientific requirements for temporal coverage over the globe. The best system consists of four sun-synchronous satellites equally spaced in local time of equatorial crossing. This system can obtain data every three hours for all regions. Several other satellite systems consisting of combinations of sun-synchronous orbits and either the Space Station Freedom or a mid-altitude equatorial satellite can provide three to six hour temporal coverage, which is sufficient for measuring many of the parameters required for the global change monitoring mission. Geosynchronous satellites are required to study atmospheric and surface processes involving variations on the order of a few minutes to an hour. One or two geosynchronous satellites can be relocated in longitude to study processes over selected regions of earth.

FPGA-based architecture for real-time data reduction of ultrasound signals.

PubMed

Soto-Cajiga, J A; Pedraza-Ortega, J C; Rubio-Gonzalez, C; Bandala-Sanchez, M; Romero-Troncoso, R de J

2012-02-01

This paper describes a novel method for on-line real-time data reduction of radiofrequency (RF) ultrasound signals. The approach is based on a field programmable gate array (FPGA) system intended mainly for steel thickness measurements. Ultrasound data reduction is desirable when: (1) direct measurements performed by an operator are not accessible; (2) it is required to store a considerable amount of data; (3) the application requires measuring at very high speeds; and (4) the physical space for the embedded hardware is limited. All the aforementioned scenarios can be present in applications such as pipeline inspection where data reduction is traditionally performed on-line using pipeline inspection gauges (PIG). The method proposed in this work consists of identifying and storing in real-time only the time of occurrence (TOO) and the maximum amplitude of each echo present in a given RF ultrasound signal. The method is tested with a dedicated immersion system where a significant data reduction with an average of 96.5% is achieved. Copyright © 2011 Elsevier B.V. All rights reserved.

Acceleration of high-pressure-ratio single-spool turbojet engine as determined from component performance characteristics I : effect of air bleed at compressor outlet

NASA Technical Reports Server (NTRS)

Rebeske, John J , Jr; Rohlik, Harold E

1953-01-01

An analytical investigation was made to determine from component performance characteristics the effect of air bleed at the compressor outlet on the acceleration characteristics of a typical high-pressure-ratio single-spool turbojet engine. Consideration of several operating lines on the compressor performance map with two turbine-inlet temperatures showed that for a minimum acceleration time the turbine-inlet temperature should be the maximum allowable, and the operating line on the compressor map should be as close to the surge region as possible throughout the speed range. Operation along such a line would require a continuously varying bleed area. A relatively simple two-step area bleed gives only a small increase in acceleration time over a corresponding variable-area bleed. For the modes of operation considered, over 84 percent of the total acceleration time was required to accelerate through the low-speed range ; therefore, better low-speed compressor performance (higher pressure ratios and efficiencies) would give a significant reduction in acceleration time.

Operating experiences with rotary air-to-air heat exchangers: hospitals, schools, nursing homes, swimming pools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pearson, R.J.

1976-01-01

Systems utilizing rotary air-to-air heat exchangers are discussed. Basic considerations of use (fresh air requirements, system configurations, cost considerations), typical system layout/design considerations, and operating observations by engineers, staff and maintenance personnel are described.

INCORPORATING WETLANDS IN WATER QUALITY TRADING: ECONOMIC CONSIDERATIONS (Journal Article)

EPA Science Inventory

Incorporating the use of wetlands as a technology to enhance water quality trading programs requires consideration of ecological, legal, and economic issues. We explore the case of encouraging the use of wetlands with a focus on the economic considerations. Interestingly, it is...

7 CFR 25.622 - Other considerations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 1 2013-01-01 2013-01-01 false Other considerations. 25.622 Section 25.622 Agriculture Office of the Secretary of Agriculture RURAL EMPOWERMENT ZONES AND ENTERPRISE COMMUNITIES Round II and Round IIS Grants § 25.622 Other considerations. (a) Civil rights compliance requirements. All...

7 CFR 25.622 - Other considerations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 1 2012-01-01 2012-01-01 false Other considerations. 25.622 Section 25.622 Agriculture Office of the Secretary of Agriculture RURAL EMPOWERMENT ZONES AND ENTERPRISE COMMUNITIES Round II and Round IIS Grants § 25.622 Other considerations. (a) Civil rights compliance requirements. All...

7 CFR 25.622 - Other considerations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 1 2014-01-01 2014-01-01 false Other considerations. 25.622 Section 25.622 Agriculture Office of the Secretary of Agriculture RURAL EMPOWERMENT ZONES AND ENTERPRISE COMMUNITIES Round II and Round IIS Grants § 25.622 Other considerations. (a) Civil rights compliance requirements. All...

7 CFR 25.622 - Other considerations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 1 2010-01-01 2010-01-01 false Other considerations. 25.622 Section 25.622 Agriculture Office of the Secretary of Agriculture RURAL EMPOWERMENT ZONES AND ENTERPRISE COMMUNITIES Round II and Round IIS Grants § 25.622 Other considerations. (a) Civil rights compliance requirements. All...

7 CFR 1735.92 - Accounting considerations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Accounting considerations. 1735.92 Section 1735.92... All Acquisitions and Mergers § 1735.92 Accounting considerations. (a) Proper accounting shall be... in the absence of such a commission, as required by RUS based on Generally Accepted Accounting...

17 CFR 39.27 - Legal risk considerations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... operations, risk management procedures, and related requirements. (c) Conflict of laws. If a derivatives... 17 Commodity and Securities Exchanges 1 2013-04-01 2013-04-01 false Legal risk considerations. 39... CLEARING ORGANIZATIONS Compliance with Core Principles § 39.27 Legal risk considerations. (a) Legal...

17 CFR 39.27 - Legal risk considerations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... operations, risk management procedures, and related requirements. (c) Conflict of laws. If a derivatives... 17 Commodity and Securities Exchanges 1 2012-04-01 2012-04-01 false Legal risk considerations. 39... CLEARING ORGANIZATIONS Compliance with Core Principles § 39.27 Legal risk considerations. (a) Legal...

7 CFR 25.622 - Other considerations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 1 2011-01-01 2011-01-01 false Other considerations. 25.622 Section 25.622 Agriculture Office of the Secretary of Agriculture RURAL EMPOWERMENT ZONES AND ENTERPRISE COMMUNITIES Round II and Round IIS Grants § 25.622 Other considerations. (a) Civil rights compliance requirements. All...

[Transfusional requirements for escharectomy in burned children].

PubMed

Julia, Analía R; Basílico, Hugo; Magaldi, Gustavo; Demirdjian, Graciela

2010-02-01

Early excision has considerably improved outcome in extensive burns, but massive resections usually mean copious bleeding that must be conveniently corrected. The purpose of this study was to measure blood component use during escharectomies in children. All pediatric patients with acute burns excised at the Burn Unit of the Hospital Garrahan during one year were included. Volume of blood component used during and immediately after surgery was analyzed and related to percent excised, time post-burn, and the coexistence of infection and autograft at the time of excision. Ninety-four surgeries in 51 children aged 0-14 years with total burned body surface areas of 5-80% who underwent resections of 3-70% were studied. Total blood use (intra + post-operatively) was 2.07 ml/kg/%excised for red blood cells (60% during surgery) and 0.7 ml/kg/% excised for plasma. Only 12% of patients required platelet transfusion. There was no significant requirement variation with the existence of infection, grafting or time post-burn. Approximately 2 ml/kg/% excised of red blood cells (2/3 for surgery) and 1 ml/kg/% excised of plasma are needed for escharectomies in children. The need for platelets must be judged considering the individual patient.

Maintainability Program Requirements for Space Systems

NASA Technical Reports Server (NTRS)

1987-01-01

This document is established to provide common general requirements for all NASA programs to: design maintainability into all systems where maintenance is a factor in system operation and mission success; and ensure that maintainability characteristics are developed through the systems engineering process. These requirements are not new. Design for ease of maintenance and minimization of repair time have always been fundamental requirements of the systems engineering process. However, new or reusable orbital manned and in-flight maintainable unmanned space systems demand special emphasis on maintainability, and this document has been prepared to meet that need. Maintainability requirements on many NASA programs differ in phasing and task emphasis from requirements promulgated by other Government agencies. This difference is due to the research and development nature of NASA programs where quantities produced are generally small; therefore, the depth of logistics support typical of many programs is generally not warranted. The cost of excessive maintenance is very high due to the logistics problems associated with the space environment. The ability to provide timely maintenance often involves safety considerations for manned space flight applications. This document represents a basic set of requirements that will achieve a design for maintenance. These requirements are directed primarily at manned and unmanned orbital space systems. To be effective, maintainability requirements should be tailored to meet specific NASA program and project needs and constraints. NASA activities shall invoke the requirements of this document consistent with program planning in procurements or on inhouse development efforts.

Improving health service management education: the manager speaks.

PubMed

Harris, M G; Harris, R D; Tapsell, L

1993-01-01

This paper uses health service manager judgements to discuss educational approaches and environments suitable to the development of required competencies and reports barriers to and opportunities for competency development. Practising managers were found to recognise and value the educational contributions made by academic programs, health service organisations and professional associations to the development of professional competence. Academic programs are seen as the appropriate vehicle for developing conceptual, analytical, problem solving and communication competencies that require considerable maturation time. Health service organisations are seen to have a key role in promoting professional competence through maintaining a culture conductive to encouraging managers to undertake further education, supported by appropriate system strategies. Professional associations are regarded as appropriate sponsors for promoting knowledge and skill update in relation to current issues in management through short courses, conferences and timely educational meetings. Wherever possible, collaboration between professional and educational organisations was seen to be desirable.

Numerical modeling of heat transfer and pasteurizing value during thermal processing of intact egg.

PubMed

Abbasnezhad, Behzad; Hamdami, Nasser; Monteau, Jean-Yves; Vatankhah, Hamed

2016-01-01

Thermal Pasteurization of Eggs, as a widely used nutritive food, has been simulated. A three-dimensional numerical model, computational fluid dynamics codes of heat transfer equations using heat natural convection, and conduction mechanisms, based on finite element method, was developed to study the effect of air cell size and eggshell thickness. The model, confirmed by comparing experimental and numerical results, was able to predict the temperature profiles, the slowest heating zone, and the required heating time during pasteurization of intact eggs. The results showed that the air cell acted as a heat insulator. Increasing the air cell volume resulted in decreasing of the heat transfer rate, and the increasing the required time of pasteurization (up to 14%). The findings show that the effect on thermal pasteurization of the eggshell thickness was not considerable in comparison to the air cell volume.

Building for the future: essential infrastructure for rodent ageing studies.

PubMed

Wells, Sara E; Bellantuono, Ilaria

2016-08-01

When planning ageing research using rodent models, the logistics of supply, long term housing and infrastructure provision are important factors to take into consideration. These issues need to be prioritised to ensure they meet the requirements of experiments which potentially will not be completed for several years. Although these issues are not unique to this discipline, the longevity of experiments and indeed the animals, requires a high level of consistency and sustainability to be maintained throughout lengthy periods of time. Moreover, the need to access aged stock or material for more immediate experiments poses many issues for the completion of pilot studies and/or short term intervention studies on older models. In this article, we highlight the increasing demand for ageing research, the resources and infrastructure involved, and the need for large-scale collaborative programmes to advance studies in both a timely and a cost-effective way.

Optimal design in pediatric pharmacokinetic and pharmacodynamic clinical studies.

PubMed

Roberts, Jessica K; Stockmann, Chris; Balch, Alfred; Yu, Tian; Ward, Robert M; Spigarelli, Michael G; Sherwin, Catherine M T

2015-03-01

It is not trivial to conduct clinical trials with pediatric participants. Ethical, logistical, and financial considerations add to the complexity of pediatric studies. Optimal design theory allows investigators the opportunity to apply mathematical optimization algorithms to define how to structure their data collection to answer focused research questions. These techniques can be used to determine an optimal sample size, optimal sample times, and the number of samples required for pharmacokinetic and pharmacodynamic studies. The aim of this review is to demonstrate how to determine optimal sample size, optimal sample times, and the number of samples required from each patient by presenting specific examples using optimal design tools. Additionally, this review aims to discuss the relative usefulness of sparse vs rich data. This review is intended to educate the clinician, as well as the basic research scientist, whom plan on conducting a pharmacokinetic/pharmacodynamic clinical trial in pediatric patients. © 2015 John Wiley & Sons Ltd.

Design of two-dimensional channels with prescribed velocity distributions along the channel walls

NASA Technical Reports Server (NTRS)

Stanitz, John D

1953-01-01

A general method of design is developed for two-dimensional unbranched channels with prescribed velocities as a function of arc length along the channel walls. The method is developed for both compressible and incompressible, irrotational, nonviscous flow and applies to the design of elbows, diffusers, nozzles, and so forth. In part I solutions are obtained by relaxation methods; in part II solutions are obtained by a Green's function. Five numerical examples are given in part I including three elbow designs with the same prescribed velocity as a function of arc length along the channel walls but with incompressible, linearized compressible, and compressible flow. One numerical example is presented in part II for an accelerating elbow with linearized compressible flow, and the time required for the solution by a Green's function in part II was considerably less than the time required for the same solution by relaxation methods in part I.

Options for Open Issues in Planetary Protection on Mars

NASA Astrophysics Data System (ADS)

Clark, Benton

2016-07-01

Planetary Protection policies span a wide range, with several new components which currently have only high-level requirements or concerns associated with them. There are various options for more detailed requirements and/or analyses which can be used to meet the intent and specifications attendant with each new policy. Encroachment near a Special Region (SR) requires special consideration. Unless Category IVb procedures are undertaken, no hardware may land within an error ellipse of a SR. However, a buffer zone could be specified, and/or assessment of contamination by windborne organisms taking into account prevailing weather, history of regional dust devils, "cleaning event" disturbances experienced by MER rovers, dilution effects relative to the 1E-4 criterion for equivalence to Category IVb bioburden reduction by dry heat, and time of exposure to harsh UV and oxidants on Mars. Most or all designated SR's are potentially but not yet proven to be SR's. Methane plume detection from orbit or ground-based assets, with consideration of where the putative SR may exist (subsurface?) can be quantitatively compared with the potential for contamination by downward transport of bioburden from hardware surfaces. Similar considerations apply to caves and cavities providing access to sub-surface regions, including evaluation of thermal regimes and compatibility with microbial growth. Ultimately, these decisions may be affected by assessment of intrinsic lethality of the martian environment which could be evaluated via direct experimentation, such as use of bacterial endospores or other hardy organisms that have been genetically engineered to prevent growth on Mars (e.g., knockout genes), with aliquots exposed separately to the full martian environment, to atmospheric oxidants (sans UV), and to the universal soil. Upon return-to-Earth, the survival power of such organism relative to control samples would provide direct measurements that can be used to evaluate and pave the way for a results-based set of requirements for management of contamination when approaching SR's, as well as for eventual human visits to the surface of the red planet.

Revised analyses of decommissioning for the reference pressurized Water Reactor Power Station. Volume 2, Effects of current regulatory and other considerations on the financial assurance requirements of the decommissioning rule and on estimates of occupational radiation exposure: Appendices, Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Konzek, G.J.; Smith, R.I.; Bierschbach, M.C.

1995-11-01

With the issuance of the final Decommissioning Rule (July 27, 1998), owners and operators of licensed nuclear power plants are required to prepare, and submit to the US Nuclear Regulatory Commission (NRC) for review, decommissioning plans and cost estimates. The NRC staff is in need of bases documentation that will assist them in assessing the adequacy of the licensee submittals, from the viewpoint of both the planned actions, including occupational radiation exposure, and the probable costs. The purpose of this reevaluation study is to provide some of the needed bases documentation. This report contains the results of a review andmore » reevaluation of the 1978 PNL decommissioning study of the Trojan nuclear power plant (NUREG/CR-0130), including all identifiable factors and cost assumptions which contribute significantly to the total cost of decommissioning the nuclear power plant for the DECON, SAFSTOR, and ENTOMB decommissioning alternatives. These alternatives now include an initial 5--7 year period during which time the spent fuel is stored in the spent fuel pool, prior to beginning major disassembly or extended safe storage of the plant. Included for information (but not presently part of the license termination cost) is an estimate of the cost to demolish the decontaminated and clean structures on the site and to restore the site to a ``green field`` condition. This report also includes consideration of the NRC requirement that decontamination and decommissioning activities leading to termination of the nuclear license be completed within 60 years of final reactor shutdown, consideration of packaging and disposal requirements for materials whose radionuclide concentrations exceed the limits for Class C low-level waste (i.e., Greater-Than-Class C), and reflects 1993 costs for labor, materials, transport, and disposal activities.« less

Revised analyses of decommissioning for the reference pressurized Water Reactor Power Station. Effects of current regulatory and other considerations on the financial assurance requirements of the decommissioning rule and on estimates of occupational radiation exposure, Volume 1, Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Konzek, G.J.; Smith, R.I.; Bierschbach, M.C.

1995-11-01

With the issuance of the final Decommissioning Rule (July 27, 1988), owners and operators of licensed nuclear power plants are required to prepare, and submit to the US Nuclear Regulatory Commission (NRC) for review, decommissioning plans and cost estimates. The NRC staff is in need of bases documentation that will assist them in assessing the adequacy of the licensee submittals, from the viewpoint of both the planned actions, including occupational radiation exposure, and the probable costs. The purpose of this reevaluation study is to provide some of the needed bases documentation. This report contains the results of a review andmore » reevaluation of the {prime}978 PNL decommissioning study of the Trojan nuclear power plant (NUREG/CR-0130), including all identifiable factors and cost assumptions which contribute significantly to the total cost of decommissioning the nuclear power plant for the DECON, SAFSTOR, and ENTOMB decommissioning alternatives. These alternatives now include an initial 5--7 year period during which time the spent fuel is stored in the spent fuel pool, prior to beginning major disassembly or extended safe storage of the plant. Included for information (but not presently part of the license termination cost) is an estimate of the cost to demolish the decontaminated and clean structures on the site and to restore the site to a ``green field`` condition. This report also includes consideration of the NRC requirement that decontamination and decommissioning activities leading to termination of the nuclear license be completed within 60 years of final reactor shutdown, consideration of packaging and disposal requirements for materials whose radionuclide concentrations exceed the limits for Class C low-level waste (i.e., Greater-Than-Class C), and reflects 1993 costs for labor, materials, transport, and disposal activities.« less

Shuttle/Agena study. Volume 2, part 3: Preliminary test plans

NASA Technical Reports Server (NTRS)

1972-01-01

Proposed testing for the Agena tug program is based upon best estimates of shuttle and Agena tug requirements and upon the Agena configuration currently envisioned to meet these requirements. The proposed tests are presented in development, qualification, system, and launch base test plans. These plans are based upon generalized requirements and assumed situations. The limitations of this study precluded all but minimal consideration of related shuttle orbiter and shuttle ground systems. The test plans include provisions for all testing from major component to systems level, identified as necessary to aid in confirmation of the modified Agena configuration for the space tug; considerations that crew safety requirements and new environmental conditions from shuttle interface effects do impose some new Agena testing requirements; considerations that many existing Agena flight-qualified components will be utilized and qualification testing will be minimal; testing not only for the Agena tug but also for new or modified items of handling or servicing equipment for supporting the Agena factory-to-launch sequence; and the assembly of required testing into a sequence-ordered series of events.

Integrating Analysis Goals for EOP, CRF and TRF

NASA Technical Reports Server (NTRS)

Ma, Chopo; MacMillan, D.; Petrov, L.; Smith, David E. (Technical Monitor)

2001-01-01

In a simplified, idealized way the TRF can be considered a set of positions at epoch and corresponding linear rates of change while the CRF is a set of fixed directions in space. VLBI analysis can be optimized for CRF and TRF separately while handling some of the complexity of geodetic and astrometric reality. For EOP time series both CRF and TRF should be accurate at the epoch of interest and well defined over time. The optimal integral EOP, TRF and CRF in a single VLBI solution configuration requires a detailed consideration of the data set and the possibly conflicting nature of reference frames.

Listing of 502 Times When the Ulysses Magnetic Fields Instrument Observed Waves Due to Newborn Interstellar Pickup Protons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cannon, Bradford E.; Smith, Charles W.; Isenberg, Philip A.

In two earlier publications we analyzed 502 intervals of magnetic waves excited by newborn interstellar pickup protons that were observed by the Ulysses spacecraft. Due to the considerable effort required in identifying these events, we provide a list of the times for the 502 wave event intervals previously identified. In the process, we provide a brief description of how the waves were found and what their properties are. We also remind the reader of the conditions that permit the waves to reach observable levels and explain why the waves are not seen more often.

Mission Design Considerations for Mars Cargo of the Human Spaceflight Architecture Team's Evolvable Mars Campaign

NASA Technical Reports Server (NTRS)

Sjauw, Waldy K.; McGuire, Melissa L.; Freeh, Joshua E.

2016-01-01

Recent NASA interest in human missions to Mars has led to an Evolvable Mars Campaign by the agency's Human Architecture Team. Delivering the crew return propulsion stages and Mars surface landers, SEP based systems are employed because of their high specific impulse characteristics enabling missions requiring less propellant although with longer transfer times. The Earth departure trajectories start from an SLS launch vehicle delivery orbit and are spiral shaped because of the low SEP thrust. Previous studies have led to interest in assessing the divide in trip time between the Earth departure and interplanetary legs of the mission for a representative SEP cargo vehicle.

Capillary electrophoresis: Biotechnology for separation of DNA and chromosomes

NASA Technical Reports Server (NTRS)

Williams, George O., Jr.

1994-01-01

Electrophoresis has been used for the separation of particles, ions, and molecules for a number of years. The technology for separation and detection of the results has many applications in the life sciences. One of the major goals of the scientific community is to separate DNA molecules and intact chromosomes based upon their different lengths or number of base pairs. This may be achieved by using some of the commercially available and widely used methods, but these processes require a considerable amount of time. The challenge is to achieve separation of intact chromosomes in a short time, preferably in a matter of minutes.

Synchronization using pulsed edge tracking in optical PPM communication system

NASA Technical Reports Server (NTRS)

Gagliardi, R.

1972-01-01

A pulse position modulated (PPM) optical communication system using narrow pulses of light for data transmission requires accurate time synchronization between transmitter and receiver. The presence of signal energy in the form of optical pulses suggests the use of a pulse edge tracking method of maintaining the necessary timing. The edge tracking operation in a binary PPM system is examined, taking into account the quantum nature of the optical transmissions. Consideration is given first to pure synchronization using a periodic pulsed intensity, then extended to the case where position modulation is present and auxiliary bit decisioning is needed to aid the tracking operation. Performance analysis is made in terms of timing error and its associated statistics. Timing error variances are shown as a function of system signal to noise ratio.

An Open Source Rapid Computer Aided Control System Design Toolchain Using Scilab, Scicos and RTAI Linux

NASA Astrophysics Data System (ADS)

Bouchpan-Lerust-Juéry, L.

2007-08-01

Current and next generation on-board computer systems tend to implement real-time embedded control applications (e.g. Attitude and Orbit Control Subsystem (AOCS), Packet Utililization Standard (PUS), spacecraft autonomy . . . ) which must meet high standards of Reliability and Predictability as well as Safety. All these requirements require a considerable amount of effort and cost for Space Sofware Industry. This paper, in a first part, presents a free Open Source integrated solution to develop RTAI applications from analysis, design, simulation and direct implementation using code generation based on Open Source and in its second part summarises this suggested approach, its results and the conclusion for further work.

Preparing ICUs for pandemics.

PubMed

Gabriel, Lucinda E K; Webb, Steve A R

2013-10-01

Influenza pandemics occur intermittently and represent an existential global infectious diseases threat. The purpose of this review is to describe clinical and research preparedness for future pandemics. Pandemic influenza typically results in large numbers of individuals with life-threatening pneumonia requiring treatment in ICUs. Clinical preparedness of ICUs relates to planning to provide increased 'surge' capacity to meet increased demand and requires consideration of staffing, equipment and consumables, bed-space availability and management systems. Research preparedness is also necessary, as timely clinical research has the potential to change the trajectory of a pandemic. The clinical research response during the 2009 H1N1 influenza pandemic was suboptimal. Better planning is necessary to optimize both clinical and research responses to future pandemics.

Quality and clinical supply considerations of Paediatric Investigation Plans for IV preparations-A case study with the FP7 CloSed project.

PubMed

Hanning, Sara M; Orlu Gul, Mine; Winslade, Jackie; Baarslag, Manuel A; Neubert, Antje; Tuleu, Catherine

2016-09-25

A Paediatric Investigation Plan (PIP) is a development plan that aims to ensure that sufficient data are obtained through studies in paediatrics to support the generation of marketing authorisation of medicines for children. This paper highlights some practical considerations and challenges with respect to PIP submissions and paediatric clinical trials during the pharmaceutical development phase, using the FP7-funded Clonidine for Sedation of Paediatric Patients in the Intensive Care Unit (CloSed) project as a case study. Examples discussed include challenges and considerations regarding formulation development, blinding and randomisation, product labelling and shipment and clinical trial requirements versus requirements for marketing authorisation. A significant quantity of information is required for PIP submissions and it is hoped that future applicants may benefit from an insight into some critical considerations and challenges faced in the CloSed project. Copyright © 2016 Elsevier B.V. All rights reserved.

7 CFR 1710.117 - Environmental considerations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Environmental considerations. 1710.117 Section 1710... GUARANTEES Loan Purposes and Basic Policies § 1710.117 Environmental considerations. Borrowers are required... Environmental Policy Act (NEPA), as amended (42 U.S.C. 4321 et seq.); the Council on Environmental Quality...

7 CFR 1710.117 - Environmental considerations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 11 2011-01-01 2011-01-01 false Environmental considerations. 1710.117 Section 1710... GUARANTEES Loan Purposes and Basic Policies § 1710.117 Environmental considerations. Borrowers are required... Environmental Policy Act (NEPA), as amended (42 U.S.C. 4321 et seq.); the Council on Environmental Quality...

40 CFR 194.51 - Consideration of protected individual.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Consideration of protected individual... Individual and Ground-Water Protection Requirements § 194.51 Consideration of protected individual. Compliance assessments that analyze compliance with § 191.15 of this chapter shall assume that an individual...

40 CFR 194.52 - Consideration of exposure pathways.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Consideration of exposure pathways... Individual and Ground-Water Protection Requirements § 194.52 Consideration of exposure pathways. In compliance assessments that analyze compliance with § 191.15 of this chapter, all potential exposure pathways...

40 CFR 194.52 - Consideration of exposure pathways.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Consideration of exposure pathways... Individual and Ground-Water Protection Requirements § 194.52 Consideration of exposure pathways. In compliance assessments that analyze compliance with § 191.15 of this chapter, all potential exposure pathways...

40 CFR 194.52 - Consideration of exposure pathways.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Consideration of exposure pathways... Individual and Ground-Water Protection Requirements § 194.52 Consideration of exposure pathways. In compliance assessments that analyze compliance with § 191.15 of this chapter, all potential exposure pathways...

40 CFR 194.52 - Consideration of exposure pathways.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Consideration of exposure pathways. 194... Individual and Ground-Water Protection Requirements § 194.52 Consideration of exposure pathways. In compliance assessments that analyze compliance with § 191.15 of this chapter, all potential exposure pathways...

40 CFR 194.52 - Consideration of exposure pathways.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Consideration of exposure pathways... Individual and Ground-Water Protection Requirements § 194.52 Consideration of exposure pathways. In compliance assessments that analyze compliance with § 191.15 of this chapter, all potential exposure pathways...

Economic impacts of federal policy responses to drought in the Rio Grande Basin

NASA Astrophysics Data System (ADS)

Ward, Frank A.; Hurd, Brian H.; Rahmani, Tarik; Gollehon, Noel

2006-03-01

Significant growth in the Rio Grande Basin's demand for water has stressed the region's scarce water supply. This paper presents an analysis of the impacts of severe and sustained drought and of minimum in-stream flow requirements to support endangered species in the Rio Grande watershed. These impacts are investigated by modeling the physical and institutional constraints within the Rio Grande Basin and by identifying the hydrologic and economic responses of all major water users. Water supplies, which include all major tributaries, interbasin transfers, and hydrologically connected groundwater, are represented in a yearly time step. A nonlinear programming model is developed to maximize economic benefits subject to hydrologic and institutional constraints. Results indicate that drought produces considerable impacts on both agriculture and municipal and industrial (MI) uses in the Rio Grande watershed. In-stream flow requirements to support endangered species' habitat produce the largest impacts on agricultural water users in New Mexico and Texas. Hydrologic and economic impacts are more pronounced when in-stream flow requirements dictate larger quantities of water for endangered species' habitat. Higher in-stream flow requirements for endangered species in central New Mexico cause considerable losses to New Mexico agriculture above Elephant Butte Reservoir and to MI users in Albuquerque, New Mexico. Those same in-stream flow requirements reduce drought damages to New Mexico agriculture below Elephant Butte Reservoir and reduce the severity of drought damages to MI users in El Paso, Texas. Results provide a framework for formulating federal policy responses to drought in the Rio Grande Basin.

22 CFR 513.311 - Investigation and referral.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (NONPROCUREMENT) AND GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE (GRANTS) Debarment § 513.311... consideration. After consideration, the debarring official may issue a notice of proposed debarment. ...

22 CFR 513.410 - Procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE (GRANTS) Suspension § 513.410 Procedures. (a) Investigation... consideration. After consideration, the suspending official may issue a notice of suspension. (b) Decisionmaking...

Application of Reduced Order Transonic Aerodynamic Influence Coefficient Matrix for Design Optimization

NASA Technical Reports Server (NTRS)

Pak, Chan-gi; Li, Wesley W.

2009-01-01

Supporting the Aeronautics Research Mission Directorate guidelines, the National Aeronautics and Space Administration [NASA] Dryden Flight Research Center is developing a multidisciplinary design, analysis, and optimization [MDAO] tool. This tool will leverage existing tools and practices, and allow the easy integration and adoption of new state-of-the-art software. Today s modern aircraft designs in transonic speed are a challenging task due to the computation time required for the unsteady aeroelastic analysis using a Computational Fluid Dynamics [CFD] code. Design approaches in this speed regime are mainly based on the manual trial and error. Because of the time required for unsteady CFD computations in time-domain, this will considerably slow down the whole design process. These analyses are usually performed repeatedly to optimize the final design. As a result, there is considerable motivation to be able to perform aeroelastic calculations more quickly and inexpensively. This paper will describe the development of unsteady transonic aeroelastic design methodology for design optimization using reduced modeling method and unsteady aerodynamic approximation. The method requires the unsteady transonic aerodynamics be represented in the frequency or Laplace domain. Dynamically linear assumption is used for creating Aerodynamic Influence Coefficient [AIC] matrices in transonic speed regime. Unsteady CFD computations are needed for the important columns of an AIC matrix which corresponded to the primary modes for the flutter. Order reduction techniques, such as Guyan reduction and improved reduction system, are used to reduce the size of problem transonic flutter can be found by the classic methods, such as Rational function approximation, p-k, p, root-locus etc. Such a methodology could be incorporated into MDAO tool for design optimization at a reasonable computational cost. The proposed technique is verified using the Aerostructures Test Wing 2 actually designed, built, and tested at NASA Dryden Flight Research Center. The results from the full order model and the approximate reduced order model are analyzed and compared.

Rapid on-site sensing aflatoxin B1 in food and feed via a chromatographic time-resolved fluoroimmunoassay.

PubMed

Zhang, Zhaowei; Tang, Xiaoqian; Wang, Du; Zhang, Qi; Li, Peiwu; Ding, Xiaoxia

2015-01-01

Aflatoxin B1 poses grave threats to food and feed safety due to its strong carcinogenesis and toxicity, thus requiring ultrasensitive rapid on-site determination. Herein, a portable immunosensor based on chromatographic time-resolved fluoroimmunoassay was developed for sensitive and on-site determination of aflatoxin B1 in food and feed samples. Chromatographic time-resolved fluoroimmunoassay offered a magnified positive signal and low signal-to-noise ratio in time-resolved mode due to the absence of noise interference caused by excitation light sources. Compared with the immunosensing performance in previous studies, this platform demonstrated a wider dynamic range of 0.2-60 μg/kg, lower limit of detection from 0.06 to 0.12 µg/kg, and considerable recovery from 80.5% to 116.7% for different food and feed sample matrices. It was found to be little cross-reactivity with other aflatoxins (B2, G1, G2, and M1). In the case of determination of aflatoxin B1 in peanuts, corn, soy sauce, vegetable oil, and mouse feed, excellent agreement was found when compared with aflatoxin B1 determination via the conversational high-performance liquid chromatography method. The chromatographic time-resolved fluoroimmunoassay affords a powerful alternative for rapid on-site determination of aflatoxin B1 and holds a promise for food safety in consideration of practical food safety and environmental monitoring.

Rapid On-Site Sensing Aflatoxin B1 in Food and Feed via a Chromatographic Time-Resolved Fluoroimmunoassay

PubMed Central

Wang, Du; Zhang, Qi; Li, Peiwu; Ding, Xiaoxia

2015-01-01

Aflatoxin B1 poses grave threats to food and feed safety due to its strong carcinogenesis and toxicity, thus requiring ultrasensitive rapid on-site determination. Herein, a portable immunosensor based on chromatographic time-resolved fluoroimmunoassay was developed for sensitive and on-site determination of aflatoxin B1 in food and feed samples. Chromatographic time-resolved fluoroimmunoassay offered a magnified positive signal and low signal-to-noise ratio in time-resolved mode due to the absence of noise interference caused by excitation light sources. Compared with the immunosensing performance in previous studies, this platform demonstrated a wider dynamic range of 0.2-60 μg/kg, lower limit of detection from 0.06 to 0.12 µg/kg, and considerable recovery from 80.5% to 116.7% for different food and feed sample matrices. It was found to be little cross-reactivity with other aflatoxins (B2, G1, G2, and M1). In the case of determination of aflatoxin B1 in peanuts, corn, soy sauce, vegetable oil, and mouse feed, excellent agreement was found when compared with aflatoxin B1 determination via the conversational high-performance liquid chromatography method. The chromatographic time-resolved fluoroimmunoassay affords a powerful alternative for rapid on-site determination of aflatoxin B1 and holds a promise for food safety in consideration of practical food safety and environmental monitoring. PMID:25874803

Design of an Integrated Division-Level Battle Simulation for Research, Development, and Training. Volume 2. Detailed Design Notes

DTIC Science & Technology

1979-08-01

frag orders for tactical considerations. Frag orders issued by simulated modules will be " edited " by the same procedure as that used with populated...record and distributed as required. Queries transmitted from any staff module will be reviewed and edited at event time for technical accuracy. If an...of this kind will have to be carefully edited and interpreted by the control- ler(s) and/or computer before the chanqe is instituted in the real world

Ground testing and simulation. II - Aerodynamic testing and simulation: Saving lives, time, and money

NASA Technical Reports Server (NTRS)

Dayman, B., Jr.; Fiore, A. W.

1974-01-01

The present work discusses in general terms the various kinds of ground facilities, in particular, wind tunnels, which support aerodynamic testing. Since not all flight parameters can be simulated simultaneously, an important problem consists in matching parameters. It is pointed out that there is a lack of wind tunnels for a complete Reynolds-number simulation. Using a computer to simulate flow fields can result in considerable reduction of wind-tunnel hours required to develop a given flight vehicle.

Time Frames for Determining of Applicability to NSR

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Design manual: Oxygen Thermal Test Article (OTTA)

NASA Technical Reports Server (NTRS)

Chronic, W. L.; Baese, C. L.; Conder, R. L.

1974-01-01

The characteristics of a cryogenic tank for storing liquid hydrogen, nitrogen, oxygen, methane, or helium for an extended period of time with minimum losses are discussed. A description of the tank and control module, assembly drawings and details of major subassemblies, specific requirements controlling development of the system, thermal concept considerations, thermal analysis methods, and a record of test results are provided. The oxygen thermal test article thermal protection system has proven that the insulation system for cryogenic vessels is effective.

Averaging Times for Compliance With VOC Emission Limits - SIP Revision Policy

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Satellite power system (SPS) concept definition study. Volume 3: Experimental verification definition

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1980-01-01

An evolutionary Satellite Power Systems development plan was prepared. Planning analysis was directed toward the evolution of a scenario that met the stated objectives, was technically possible and economically attractive, and took into account constraining considerations, such as requirements for very large scale end-to-end demonstration in a compressed time frame, the relative cost/technical merits of ground testing versus space testing, and the need for large mass flow capability to low Earth orbit and geosynchronous orbit at reasonable cost per pound.

Transcending binary logic by gating three coupled quantum dots.

PubMed

Klein, Michael; Rogge, S; Remacle, F; Levine, R D

2007-09-01

Physical considerations supported by numerical solution of the quantum dynamics including electron repulsion show that three weakly coupled quantum dots can robustly execute a complete set of logic gates for computing using three valued inputs and outputs. Input is coded as gating (up, unchanged, or down) of the terminal dots. A nanosecond time scale switching of the gate voltage requires careful numerical propagation of the dynamics. Readout is the charge (0, 1, or 2 electrons) on the central dot.

Laser intensity modulated real time monitoring cell growth sensor for bioprocess applications

NASA Astrophysics Data System (ADS)

Kishore, P.; Babu, P. Ravindra; Devi, V. Rama; Maunika, T.; Soujanya, P.; Kishore, P. V. N.; Dinakar, D.

2016-04-01

This article proposes an optical method for monitoring the growth of Escherichia coli in Luria Bertani medium and Saccharomyces cereviciae in YPD. Suitable light is selected which on interaction with the analyte under consideration, gets adsorption / scattered. Required electronic circuitry is designed to drive the laser source and to detect the intensity of light using Photo-detector. All these components are embedded and arranged in a proper way and monitored the growth of the microbs in real time. The sensors results are compared with standard techniques such as colorimeter, Nephelometer and hemocytometer. The experimental results are in good agreement with the existed techniques and well suitable for real time monitoring applications of the growth of the microbs.

Impact of a psychiatric unit's daily discharge rates on emergency department flow.

PubMed

Bastiampillai, Tarun; Schrader, Geoffrey; Dhillon, Rohan; Strobel, Jörg; Bidargaddi, Niranjan

2012-04-01

To investigate relationships between time spent in the emergency department (ED) in patients requiring admission to the psychiatric ward, the day of the week of presentation and the daily number of discharges from the psychiatric ward. Retrospective analysis of patient flow as a function of day of week, time of day (a.m., p.m.), number of patients requiring admission and number of ward discharges over a one-year period, for all mental health related presentations to the ED of the Queen Elizabeth Hospital in Adelaide, South Australia, before their admission to the psychiatric inpatient facility. The time spent by patients in the ED waiting for admission to the psychiatric ward was significantly greater on weekends. There were significantly fewer discharges from the psychiatric ward during weekends compared with weekdays. The average time spent by patients in the ED requiring admission to the psychiatric ward for those days when there were vacant beds was 17.9 hours (SD=14.5). More people presented to the ED with a psychiatric diagnosis in the afternoons. There was a significant inverse correlation between the time spent by patients in the ED requiring admission to the psychiatric ward per day and the number of discharges from the psychiatric ward per day. These findings demonstrate that patient flow is significantly slower on weekends because of fewer discharges from the ward, leading to longer times spent in the ED before ward transfer. Waiting times in the ED were very substantially greater than the proposed 4-hour target even when vacant beds were available, raising considerable doubt about that target being realistic for psychiatric patients.

NPR design basis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Locke, G.L.

1958-09-08

The design basis is composed of requirements and conditions for the design of the reactor plant (composed of the reactor and heat dissipation system). Its intent is to insure that the final product meets the economic, safety, and technical objectives of the project. The design basis is dependent on the ground rules, objectives, technical criteria, and practical design considerations. This document is being issued with the understanding that these items are not yet firmly established in all respects, and therefore, the numbers put down here are subject to change. Consideration of the spectrum of probable changes that might be mademore » leads to the conclusion that the numbers here are close to the final ones and are satisfactory as a basis for the initial stages of design. Some numbers are omitted because of insufficient data at this time.« less

The Psychological Benefits from Reconceptualizing Music-Making as Mindfulness Practice.

PubMed

Steinfeld, Matthew; Brewer, Judson

2015-06-01

While the music psychology and education literatures have devoted considerable attention to how musical instrumentalists practice their instruments, less formal scholarly attention has been given in consideration of what it means to maintain a musical "practice" over time and across context. In this paper, the practice of mindfulness meditation is used as heuristic, arguing for a view of mindfulness meditation as a formalized de-specialization of the infinite number of other activities with which people can achieve mindfulness. Sitting meditation, requiring of one to observe the contents of their mind unmediated, can serve as a useful model for the musician in understanding the phenomenology of the music-making process and the "flow" states that can result from an embodied musical practice. Finally, reconceptualizing music-making as a mindfulness practice is considered with psychological and pedagogical implications relevant for developing musicians.

Cost considerations in database selection - A comparison of DIALOG and ESA/IRS

NASA Technical Reports Server (NTRS)

Jack, R. F.

1984-01-01

It is pointed out that there are many factors which affect the decision-making process in determining which databases should be selected for conducting the online search on a given topic. In many cases, however, the major consideration will be related to cost. The present investigation is concerned with a comparison of the costs involved in making use of DIALOG and the European Space Agency's Information Retrieval Service (ESA/IRS). The two services are very comparable in many respects. Attention is given to pricing structure, telecommunications, the number of databases, prints, time requirements, a table listing online costs for DIALOG and ESA/IRS, and differences in mounting databases. It is found that ESA/IRS is competitively priced when compared to DIALOG, and, despite occasionally higher telecommunications costs, may be even more economical to use in some cases.

Practical Considerations in Donation After Circulatory Determination of Death in Switzerland.

PubMed

Dalle Ave, Anne L; Shaw, David M; Elger, Bernice

2017-09-01

Faced with similar issues of organ scarcity to its neighbors, Switzerland has developed donation after circulatory determination of death (DCDD) as a way to expand the organ pool since 1985. Here, we analyze the history, practical considerations, and ethical issues relating to the Swiss donation after circulatory death programs. In Switzerland, determination of death for DCDD requires a stand-off period of 10 minutes. This time between cardiac arrest and the declaration of death is mandated in the guidelines of the Swiss Academy of Medical Sciences. As in other DCDD programs, safeguards are put to avoid physicians denying lifesaving treatment to savable patients because of being influenced by receivers' interest. An additional recommendation could be made: Recipients should be transparently informed of the worse graft outcomes with DCDD programs and given the possibility to refuse such organs.

Amateur Telescope Making

NASA Astrophysics Data System (ADS)

Tonkin, Stephen

Many amateur astronomers make their own instruments, either because of financial considerations or because they are just interested. Amateur Telescope Making offers a variety of designs for telescopes, mounts and drives which are suitable for the home-constructor. The designs range from simple to advanced, but all are within the range of a moderately well-equipped home workshop. The book not only tells the reader what he can construct, but also what it is sensible to construct given what time is available commercially. Thus each chapter begins with reasons for undertaking the project, then looks at theoretical consideration before finishing with practical instructions and advice. An indication is given as to the skills required for the various projects. Appendices list reputable sources of (mail order) materials and components. The telescopes and mounts range from "shoestring" (very cheap) instruments to specialist devices that are unavailable commercially.

Chemical degradation of proteins in the solid state with a focus on photochemical reactions.

PubMed

Mozziconacci, Olivier; Schöneich, Christian

2015-10-01

Protein pharmaceuticals comprise an increasing fraction of marketed products but the limited solution stability of proteins requires considerable research effort to prepare stable formulations. An alternative is solid formulation, as proteins in the solid state are thermodynamically less susceptible to degradation. Nevertheless, within the time of storage a large panel of kinetically controlled degradation reactions can occur such as, e.g., hydrolysis reactions, the formation of diketopiperazine, condensation and aggregation reactions. These mechanisms of degradation in protein solids are relatively well covered by the literature. Considerably less is known about oxidative and photochemical reactions of solid proteins. This review will provide an overview over photolytic and non-photolytic degradation reactions, and specially emphasize mechanistic details on how solid structure may affect the interaction of protein solids with light. Copyright © 2014 Elsevier B.V. All rights reserved.

Aerodynamic characteristics of the Fiat UNO car

DOE Office of Scientific and Technical Information (OSTI.GOV)

Costelli, A.F.

1984-01-01

The purpose of this article is to describe the work conducted in the aerodynamic field throughout the 4-year development and engineering time span required by the project of the UNO car. A description is given of all the parametric studies carried out. Through these studies two types of cars at present in production were defined and the characteristics of a possible future sports version laid down. A movable device, to be fitted in the back window, was also set up and patented. When actuated it reduces soiling of back window. A description is also provided of the measurements made inmore » the car flow field and some considerations are outlined about the method applied. This method is still in development phase but it already permits some considerations and in-depth investigations to be made on the vehicle wake.« less

Implicit time accurate simulation of unsteady flow

NASA Astrophysics Data System (ADS)

van Buuren, René; Kuerten, Hans; Geurts, Bernard J.

2001-03-01

Implicit time integration was studied in the context of unsteady shock-boundary layer interaction flow. With an explicit second-order Runge-Kutta scheme, a reference solution to compare with the implicit second-order Crank-Nicolson scheme was determined. The time step in the explicit scheme is restricted by both temporal accuracy as well as stability requirements, whereas in the A-stable implicit scheme, the time step has to obey temporal resolution requirements and numerical convergence conditions. The non-linear discrete equations for each time step are solved iteratively by adding a pseudo-time derivative. The quasi-Newton approach is adopted and the linear systems that arise are approximately solved with a symmetric block Gauss-Seidel solver. As a guiding principle for properly setting numerical time integration parameters that yield an efficient time accurate capturing of the solution, the global error caused by the temporal integration is compared with the error resulting from the spatial discretization. Focus is on the sensitivity of properties of the solution in relation to the time step. Numerical simulations show that the time step needed for acceptable accuracy can be considerably larger than the explicit stability time step; typical ratios range from 20 to 80. At large time steps, convergence problems that are closely related to a highly complex structure of the basins of attraction of the iterative method may occur. Copyright

49 CFR 209.329 - Assessment considerations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... frequently repeated; (2) The adverse impact or the potentially adverse impact of the violation on the health... 49 Transportation 4 2010-10-01 2010-10-01 false Assessment considerations. 209.329 Section 209.329... Assessment considerations. (a) Proof of a respondent's willful violation of one of the requirements of parts...

49 CFR 209.329 - Assessment considerations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... frequently repeated; (2) The adverse impact or the potentially adverse impact of the violation on the health... 49 Transportation 4 2014-10-01 2014-10-01 false Assessment considerations. 209.329 Section 209.329... Assessment considerations. (a) Proof of a respondent's willful violation of one of the requirements of parts...

49 CFR 209.329 - Assessment considerations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... frequently repeated; (2) The adverse impact or the potentially adverse impact of the violation on the health... 49 Transportation 4 2013-10-01 2013-10-01 false Assessment considerations. 209.329 Section 209.329... Assessment considerations. (a) Proof of a respondent's willful violation of one of the requirements of parts...

49 CFR 209.329 - Assessment considerations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... frequently repeated; (2) The adverse impact or the potentially adverse impact of the violation on the health... 49 Transportation 4 2012-10-01 2012-10-01 false Assessment considerations. 209.329 Section 209.329... Assessment considerations. (a) Proof of a respondent's willful violation of one of the requirements of parts...

49 CFR 209.329 - Assessment considerations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... frequently repeated; (2) The adverse impact or the potentially adverse impact of the violation on the health... 49 Transportation 4 2011-10-01 2011-10-01 false Assessment considerations. 209.329 Section 209.329... Assessment considerations. (a) Proof of a respondent's willful violation of one of the requirements of parts...

40 CFR 194.33 - Consideration of drilling events in performance assessments.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Consideration of drilling events in... and Re-certification Containment Requirements § 194.33 Consideration of drilling events in performance... shall be used in assessing the likelihood and consequences of drilling events, and the results of such...

40 CFR 194.33 - Consideration of drilling events in performance assessments.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Consideration of drilling events in... and Re-certification Containment Requirements § 194.33 Consideration of drilling events in performance... shall be used in assessing the likelihood and consequences of drilling events, and the results of such...

40 CFR 194.33 - Consideration of drilling events in performance assessments.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Consideration of drilling events in... and Re-certification Containment Requirements § 194.33 Consideration of drilling events in performance... shall be used in assessing the likelihood and consequences of drilling events, and the results of such...

40 CFR 194.33 - Consideration of drilling events in performance assessments.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Consideration of drilling events in... and Re-certification Containment Requirements § 194.33 Consideration of drilling events in performance... shall be used in assessing the likelihood and consequences of drilling events, and the results of such...

Adapting practice-based intervention research to electronic environments: opportunities and complexities at two institutions.

PubMed

Stille, Christopher J; Lockhart, Steven A; Maertens, Julie A; Madden, Christi A; Darden, Paul M

2015-01-01

Primary care practice-based research has become more complex with increased use of electronic health records (EHRs). Little has been reported about changes in study planning and execution that are required as practices change from paper-based to electronic-based environments. We describe the evolution of a pediatric practice-based intervention study as it was adapted for use in the electronic environment, to enable other practice-based researchers to plan efficient, effective studies. We adapted a paper-based pediatric office-level intervention to enhance parent-provider communication about subspecialty referrals for use in two practice-based research networks (PBRNs) with partially and fully electronic environments. We documented the process of adaptation and its effect on study feasibility and efficiency, resource use, and administrative and regulatory complexities, as the study was implemented in the two networks. Considerable time and money was required to adapt the paper-based study to the electronic environment, requiring extra meetings with institutional EHR-, regulatory-, and administrative teams, and increased practice training. Institutional unfamiliarity with using EHRs in practice-based research, and the consequent need to develop new policies, were major contributors to delays. Adapting intervention tools to the EHR and minimizing practice disruptions was challenging, but resulted in several efficiencies as compared with a paper-based project. In particular, recruitment and tracking of subjects and data collection were easier and more efficient. Practice-based intervention research in an electronic environment adds considerable cost and time at the outset of a study, especially for centers unfamiliar with such research. Efficiencies generated have the potential of easing the work of study enrollment, subject tracking, and data collection.

Engineering Design of ITER Prototype Fast Plant System Controller

NASA Astrophysics Data System (ADS)

Goncalves, B.; Sousa, J.; Carvalho, B.; Rodrigues, A. P.; Correia, M.; Batista, A.; Vega, J.; Ruiz, M.; Lopez, J. M.; Rojo, R. Castro; Wallander, A.; Utzel, N.; Neto, A.; Alves, D.; Valcarcel, D.

2011-08-01

The ITER control, data access and communication (CODAC) design team identified the need for two types of plant systems. A slow control plant system is based on industrial automation technology with maximum sampling rates below 100 Hz, and a fast control plant system is based on embedded technology with higher sampling rates and more stringent real-time requirements than that required for slow controllers. The latter is applicable to diagnostics and plant systems in closed-control loops whose cycle times are below 1 ms. Fast controllers will be dedicated industrial controllers with the ability to supervise other fast and/or slow controllers, interface to actuators and sensors and, if necessary, high performance networks. Two prototypes of a fast plant system controller specialized for data acquisition and constrained by ITER technological choices are being built using two different form factors. This prototyping activity contributes to the Plant Control Design Handbook effort of standardization, specifically regarding fast controller characteristics. Envisaging a general purpose fast controller design, diagnostic use cases with specific requirements were analyzed and will be presented along with the interface with CODAC and sensors. The requirements and constraints that real-time plasma control imposes on the design were also taken into consideration. Functional specifications and technology neutral architecture, together with its implications on the engineering design, were considered. The detailed engineering design compliant with ITER standards was performed and will be discussed in detail. Emphasis will be given to the integration of the controller in the standard CODAC environment. Requirements for the EPICS IOC providing the interface to the outside world, the prototype decisions on form factor, real-time operating system, and high-performance networks will also be discussed, as well as the requirements for data streaming to CODAC for visualization and archiving.

Materials for occupational eye protectors.

PubMed

Dain, Stephen J

2012-03-01

The selection of lens materials for non-prescription personal protective equipment has been a relatively simple process and has its origins in many studies around the 1970s. The viable materials available at that time were tempered glass, hard resin (n = 1.50) and polycarbonate. The modern spectacle non-prescription eye protector of choice is inevitably hard coated polycarbonate, which has exemplary impact resistant properties. In the prescription lens area, there is a bewildering array of materials of various refractive indices with a variety of coatings. The selection of an ophthalmic lens has optical and cosmetic considerations ahead of impact resistance. In complying with the Australian/New Zealand standard on prescription eye protection, adequate impact resistance must rate as the foremost requirement, with optical and cosmetic considerations as important but lesser considerations. In this review, the evidence on impact resistance of the available materials is presented, the standards set for testing impact resistance are detailed and some guidance is provided for the selection of prescription eye protection materials. © 2012 The Author. Clinical and Experimental Optometry © 2012 Optometrists Association Australia.

Synchronization and fault-masking in redundant real-time systems

NASA Technical Reports Server (NTRS)

Krishna, C. M.; Shin, K. G.; Butler, R. W.

1983-01-01

A real time computer may fail because of massive component failures or not responding quickly enough to satisfy real time requirements. An increase in redundancy - a conventional means of improving reliability - can improve the former but can - in some cases - degrade the latter considerably due to the overhead associated with redundancy management, namely the time delay resulting from synchronization and voting/interactive consistency techniques. The implications of synchronization and voting/interactive consistency algorithms in N-modular clusters on reliability are considered. All these studies were carried out in the context of real time applications. As a demonstrative example, we have analyzed results from experiments conducted at the NASA Airlab on the Software Implemented Fault Tolerance (SIFT) computer. This analysis has indeed indicated that in most real time applications, it is better to employ hardware synchronization instead of software synchronization and not allow reconfiguration.

Biologic Monitoring of Exposure to Environmental Chemicals throughout the Life Stages: Requirements and Issues for Consideration for the National Children’s Study

PubMed Central

Barr, Dana B.; Wang, Richard Y.; Needham, Larry L.

2005-01-01

Biomonitoring of exposure is a useful tool for assessing environmental exposures. The matrices available for analyses include blood, urine, breast milk, adipose tissue, and saliva, among others. The sampling can be staged to represent the particular time period of concern: preconceptionally from both parents, from a pregnant woman during each of the three trimesters, during and immediately after childbirth, from the mother postnatally, and from the child as it develops to 21 years of age. The appropriate sample for biomonitoring will depend upon matrix availability, the time period of concern for a particular exposure or health effect, and the different classes of environmental chemicals to be monitored. This article describes the matrices available for biomonitoring during the life stages being evaluated in the National Children’s Study; the best biologic matrices for exposure assessment for each individual chemical class, including consideration of alternative matrices; the analytical methods used for analysis, including quality control procedures and less costly alternatives; the costs of analysis; optimal storage conditions; and chemical and matrix stability during long-term storage. PMID:16079083

Enhancing the Quality of Service for Real Time Traffic over Optical Burst Switching (OBS) Networks with Ensuring the Fairness for Other Traffics.

PubMed

Al-Shargabi, Mohammed A; Shaikh, Asadullah; Ismail, Abdulsamad S

2016-01-01

Optical burst switching (OBS) networks have been attracting much consideration as a promising approach to build the next generation optical Internet. A solution for enhancing the Quality of Service (QoS) for high priority real time traffic over OBS with the fairness among the traffic types is absent in current OBS' QoS schemes. In this paper we present a novel Real Time Quality of Service with Fairness Ratio (RT-QoSFR) scheme that can adapt the burst assembly parameters according to the traffic QoS needs in order to enhance the real time traffic QoS requirements and to ensure the fairness for other traffic. The results show that RT-QoSFR scheme is able to fulfill the real time traffic requirements (end to end delay, and loss rate) ensuring the fairness for other traffics under various conditions such as the type of real time traffic and traffic load. RT-QoSFR can guarantee that the delay of the real time traffic packets does not exceed the maximum packets transfer delay value. Furthermore, it can reduce the real time traffic packets loss, at the same time guarantee the fairness for non real time traffic packets by determining the ratio of real time traffic inside the burst to be 50-60%, 30-40%, and 10-20% for high, normal, and low traffic loads respectively.

Planning and setting objectives in field studies: Chapter 2

USGS Publications Warehouse

Fisher, Robert N.; Dodd, C. Kenneth

2016-01-01

This chapter enumerates the steps required in designing and planning field studies on the ecology and conservation of reptiles, as these involve a high level of uncertainty and risk. To this end, the chapter differentiates between goals (descriptions of what one intends to accomplish) and objectives (the measurable steps required to achieve the established goals). Thus, meeting a specific goal may require many objectives. It may not be possible to define some of them until certain experiments have been conducted; often evaluations of sampling protocols are needed to increase certainty in the biological results. And if sampling locations are fixed and sampling events are repeated over time, then both study-specific covariates and sampling-specific covariates should exist. Additionally, other critical design considerations for field study include obtaining permits, as well as researching ethics and biosecurity issues.

A review of microdialysis coupled to microchip electrophoresis for monitoring biological events

PubMed Central

Saylor, Rachel A.; Lunte, Susan M.

2015-01-01

Microdialysis is a powerful sampling technique that enables monitoring of dynamic processes in vitro and in vivo. The combination of microdialysis with chromatographic or electrophoretic methods yields along with selective detection methods yields a “separation-based sensor” capable of monitoring multiple analytes in near real time. Analysis of microdialysis samples requires techniques that are fast (<1 min), have low volume requirements (nL–pL), and, ideally, can be employed on-line. Microchip electrophoresis fulfills these requirements and also permits the possibility of integrating sample preparation and manipulation with detection strategies directly on-chip. Microdialysis coupled to microchip electrophoresis has been employed for monitoring biological events in vivo and in vitro. This review discusses technical considerations for coupling microdialysis sampling and microchip electrophoresis, including various interface designs, and current applications in the field. PMID:25637011

Real-Time PPP Based on the Coupling Estimation of Clock Bias and Orbit Error with Broadcast Ephemeris.

PubMed

Pan, Shuguo; Chen, Weirong; Jin, Xiaodong; Shi, Xiaofei; He, Fan

2015-07-22

Satellite orbit error and clock bias are the keys to precise point positioning (PPP). The traditional PPP algorithm requires precise satellite products based on worldwide permanent reference stations. Such an algorithm requires considerable work and hardly achieves real-time performance. However, real-time positioning service will be the dominant mode in the future. IGS is providing such an operational service (RTS) and there are also commercial systems like Trimble RTX in operation. On the basis of the regional Continuous Operational Reference System (CORS), a real-time PPP algorithm is proposed to apply the coupling estimation of clock bias and orbit error. The projection of orbit error onto the satellite-receiver range has the same effects on positioning accuracy with clock bias. Therefore, in satellite clock estimation, part of the orbit error can be absorbed by the clock bias and the effects of residual orbit error on positioning accuracy can be weakened by the evenly distributed satellite geometry. In consideration of the simple structure of pseudorange equations and the high precision of carrier-phase equations, the clock bias estimation method coupled with orbit error is also improved. Rovers obtain PPP results by receiving broadcast ephemeris and real-time satellite clock bias coupled with orbit error. By applying the proposed algorithm, the precise orbit products provided by GNSS analysis centers are rendered no longer necessary. On the basis of previous theoretical analysis, a real-time PPP system was developed. Some experiments were then designed to verify this algorithm. Experimental results show that the newly proposed approach performs better than the traditional PPP based on International GNSS Service (IGS) real-time products. The positioning accuracies of the rovers inside and outside the network are improved by 38.8% and 36.1%, respectively. The PPP convergence speeds are improved by up to 61.4% and 65.9%. The new approach can change the traditional PPP mode because of its advantages of independence, high positioning precision, and real-time performance. It could be an alternative solution for regional positioning service before global PPP service comes into operation.

Real-Time PPP Based on the Coupling Estimation of Clock Bias and Orbit Error with Broadcast Ephemeris

PubMed Central

Pan, Shuguo; Chen, Weirong; Jin, Xiaodong; Shi, Xiaofei; He, Fan

2015-01-01

Satellite orbit error and clock bias are the keys to precise point positioning (PPP). The traditional PPP algorithm requires precise satellite products based on worldwide permanent reference stations. Such an algorithm requires considerable work and hardly achieves real-time performance. However, real-time positioning service will be the dominant mode in the future. IGS is providing such an operational service (RTS) and there are also commercial systems like Trimble RTX in operation. On the basis of the regional Continuous Operational Reference System (CORS), a real-time PPP algorithm is proposed to apply the coupling estimation of clock bias and orbit error. The projection of orbit error onto the satellite-receiver range has the same effects on positioning accuracy with clock bias. Therefore, in satellite clock estimation, part of the orbit error can be absorbed by the clock bias and the effects of residual orbit error on positioning accuracy can be weakened by the evenly distributed satellite geometry. In consideration of the simple structure of pseudorange equations and the high precision of carrier-phase equations, the clock bias estimation method coupled with orbit error is also improved. Rovers obtain PPP results by receiving broadcast ephemeris and real-time satellite clock bias coupled with orbit error. By applying the proposed algorithm, the precise orbit products provided by GNSS analysis centers are rendered no longer necessary. On the basis of previous theoretical analysis, a real-time PPP system was developed. Some experiments were then designed to verify this algorithm. Experimental results show that the newly proposed approach performs better than the traditional PPP based on International GNSS Service (IGS) real-time products. The positioning accuracies of the rovers inside and outside the network are improved by 38.8% and 36.1%, respectively. The PPP convergence speeds are improved by up to 61.4% and 65.9%. The new approach can change the traditional PPP mode because of its advantages of independence, high positioning precision, and real-time performance. It could be an alternative solution for regional positioning service before global PPP service comes into operation. PMID:26205276

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prowell, I.; Elgamal, A.; Romanowitz, H.

Demand parameters for turbines, such as tower moment demand, are primarily driven by wind excitation and dynamics associated with operation. For that purpose, computational simulation platforms have been developed, such as FAST, maintained by the National Renewable Energy Laboratory (NREL). For seismically active regions, building codes also require the consideration of earthquake loading. Historically, it has been common to use simple building code approaches to estimate the structural demand from earthquake shaking, as an independent loading scenario. Currently, International Electrotechnical Commission (IEC) design requirements include the consideration of earthquake shaking while the turbine is operating. Numerical and analytical tools usedmore » to consider earthquake loads for buildings and other static civil structures are not well suited for modeling simultaneous wind and earthquake excitation in conjunction with operational dynamics. Through the addition of seismic loading capabilities to FAST, it is possible to simulate earthquake shaking in the time domain, which allows consideration of non-linear effects such as structural nonlinearities, aerodynamic hysteresis, control system influence, and transients. This paper presents a FAST model of a modern 900-kW wind turbine, which is calibrated based on field vibration measurements. With this calibrated model, both coupled and uncoupled simulations are conducted looking at the structural demand for the turbine tower. Response is compared under the conditions of normal operation and potential emergency shutdown due the earthquake induced vibrations. The results highlight the availability of a numerical tool for conducting such studies, and provide insights into the combined wind-earthquake loading mechanism.« less

Impaired alcohol metabolism after gastric bypass surgery: a case-crossover trial.

PubMed

Woodard, Gavitt A; Downey, John; Hernandez-Boussard, Tina; Morton, John M

2011-02-01

Severe obesity remains the leading public health crisis of the industrialized world, with bariatric surgery the only effective and enduring treatment. Poor psychological adjustment has been occasionally reported postoperatively. In addition, evidence suggests that patients can metabolize alcohol differently after gastric bypass. Preoperatively and at 3 and 6 months postoperatively, 19 Roux-en-Y gastric bypass (RYGB) patients' breath alcohol content (BAC) was measured every 5 minutes after drinking 5 oz red wine to determine peak BAC and time until sober in a case-crossover design preoperatively and at 6 months postoperatively. Patients reported symptoms experienced when intoxicated and answered a questionnaire of drinking habits. The peak BAC in patients after RYGB was considerably higher at 3 months (0.059%) and 6 months (0.088%) postoperatively than matched preoperative levels (0.024%). Patients also took considerably more time to return to sober at 3 months (61 minutes) and 6 months (88 minutes) than preoperatively (49 minutes). Postoperative intoxication was associated with lower levels of diaphoresis, flushing, and hyperactivity and higher levels of dizziness, warmth, and double vision. Postoperative patients reported drinking considerably less alcohol, fewer preferred beer, and more preferred wine than before surgery. This is the first study to match preoperative and postoperative alcohol metabolism in gastric bypass patients. Post-RYGB patients have much higher peak BAC after ingesting alcohol and require more time to become sober. Patients who drink alcohol after gastric bypass surgery should exercise caution. Copyright © 2011 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Time scales of tunneling decay of a localized state

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ban, Yue; Muga, J. G.; Sherman, E. Ya.

2010-12-15

Motivated by recent time-domain experiments on ultrafast atom ionization, we analyze the transients and time scales that characterize, aside from the relatively long lifetime, the decay of a localized state by tunneling. While the tunneling starts immediately, some time is required for the outgoing flux to develop. This short-term behavior depends strongly on the initial state. For the initial state, tightly localized so that the initial transients are dominated by over-the-barrier motion, the time scale for flux propagation through the barrier is close to the Buettiker-Landauer traversal time. Then a quasistationary, slow-decay process follows, which sets ideal conditions for observingmore » diffraction in time at longer times and distances. To define operationally a tunneling time at the barrier edge, we extrapolate backward the propagation of the wave packet that escaped from the potential. This extrapolated time is considerably longer than the time scale of the flux and density buildup at the barrier edge.« less

Assessing the Performance of LED-Based Flashlights Available in the Kenyan Off-Grid Lighting Market

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tracy, Jennifer; Jacobson, Arne; Mills, Evan

Low cost rechargeable flashlights that use LED technology are increasingly available in African markets. While LED technology holds promise to provide affordable, high quality lighting services, the widespread dissemination of low quality products may make it difficult to realize this potential. This study includes performance results for three brands of commonly available LED flashlights that were purchased in Kenya in 2009. The performance of the flashlights was evaluated by testing five units for each of the three brands. The tests included measurements of battery capacity, time required to charge the battery, maximum illuminance at one meter, operation time and lux-hoursmore » from a fully charged battery, light distribution, and color rendering. All flashlights tested performed well below the manufacturers? rated specifications; the measured battery capacity was 30-50percent lower than the rated capacity and the time required to fully charge the battery was 6-25percent greater than the rated time requirement. Our analysis further shows that within each brand there is considerable variability in each performance indicator. The five samples within a single brand varied from each other by as much as 22percent for battery capacity measurements, 3.6percent for the number of hours required for a full charge, 23percent for maximum initial lux, 38percent for run time, 11percent for light distribution and by as much as 200percent for color rendering. Results obtained are useful for creating a framework for quality assurance of off-grid LED products and will be valuable for informing consumers, distributors and product manufacturers about product performance.« less

Effects of proton irradiation on a gas phase in which condensation takes place. I Negative Mg-26 anomalies and Al-26. [applied to solar and meteoritic composition

NASA Technical Reports Server (NTRS)

Heymann, D.; Dziczkaniec, M.; Walker, A.; Huss, G.; Morgan, J. A.

1978-01-01

In the present paper, isotopic effects in magnesium generated in a proton-irradiated gas phase are examined, taking only (p,n), (p,d), and (p, alpha) reactions in magnesium, aluminum, and silicon into consideration. In the presence of proton radiation, the three elements are 'removed' from the gas phase by condensation. It is required that a value of Al-26/Al-27 greater than 6 times 10 to the -5th must be reached, consistent with the value deduced by Lee Papanastassiou, and Wasserburg (1976) from their studies of the Allende meteorite. The calculations show that fast aluminum condensation reduces the required proton fluence substantially, that a significant fraction of aluminum remains uncondensed when the above value of the Al-26/Al-27 ratio is reached, that a detectable MG-24 excess is very likely to occur, that detectable negative MG-28 anomalies can be generated, and that proton fluxes and irradiation times can be varied simultaneously, and over a wide range of values, without significant changes in the required proton fluence.

Enhancing Self-Practice/Self-Reflection (SP/SR) approach to cognitive behaviour training through the use of reflective blogs.

PubMed

Farrand, Paul; Perry, Jon; Linsley, Sue

2010-07-01

Self-Practice/Self-Reflection (SP/SR) is increasingly beginning to feature as a central component of CBT training programmes (Bennett-Levy et al., 2001). Programmes including a reflective element, however, are not unproblematic and it has been documented that simply setting time aside for reflection does not necessarily result in trainees using such time to reflect. Such limitations may be overcome by including a requirement to post reflections on reflective blogs. To examine the effect that a requirement to contribute to a reflective blog had upon a SP/SR approach to CBT training. A focus group methodology was adopted with data analyzed using a general inductive qualitative approach. The requirement to use blogs to reflect upon the self-practice of CBT techniques enhanced SP/SR, established a learning community, and improved course supervision, although some technical difficulties arose. Consideration should be given towards using reflective blogs to support a SP/SR approach to CBT training. Benefits afforded by the use of reflective blogs further establish SP/SR as a valid and flexible training approach.

Manufacturing considerations for AMLCD cockpit displays

NASA Astrophysics Data System (ADS)

Luo, Fang-Chen

1995-06-01

AMLCD cockpit displays need to meet more stringent requirements compared with AMLCD commercial displays in areas such as environmental conditions, optical performance and device reliability. Special considerations are required for the manufacturing of AMLCD cockpit displays in each process step to address these issues. Some examples are: UV stable polarizers, wide-temperature LC material, strong LC glue seal, ESS test system, gray scale voltage EEPROM, etc.

Microcomputer Program Design Considerations for the Novice User

DTIC Science & Technology

1987-03-01

relatively recent, widespread proliferation of microcomputers into both the home and work place has resulted in a shifting of computer operation and...design decisions be made with respect to both the requirements specifications and interface considerations. Since a project’s requirement...expertise, may be quite meaningless or confusing to the end user. It is therefore proposed that interface design decisions should be made under the assumption

A multinational investigation of time and traveling costs in attending anticoagulation clinics.

PubMed

Jowett, Sue; Bryan, Stirling; Mahé, Isabelle; Brieger, David; Carlsson, Jonas; Kartman, Bernt; Nevinson, Mark

2008-01-01

Anticoagulation is used in patients with atrial fibrillation to reduce the risk of ischemic stroke. The therapy requires regular monitoring and, frequently, dose adjustment. This study aimed to determine the time and traveling costs that patients incur to themselves and society in attending anticoagulation clinics. A subset of patients from 105 primary and secondary care clinics allocated to the warfarin arm of SPORTIF III (patients from Australia, France, Portugal, Spain, Sweden, and the UK) completed a questionnaire. Patients indicated the type of transport used for clinic visits, and estimated traveling expenses. Patients were also asked to estimate total traveling and clinic attendance time, and to confirm whether they were currently employed and whether they had to give up time from work to attend the clinic. Time cost of companions was also taken into consideration. Cost per visit was calculated (euro, 2003 prices). Questionnaires for a total of 381 patients were analyzed, with the majority of patients from Sweden (n = 130) and the UK (n = 101). Mean cost to patients varied widely between countries, ranging from euro6.9 (France) to euro20.5 (Portugal) per visit. For most countries, time costs (value of lost working and leisure time) were the main driver of costs. Mean time cost to society ranged from euro5.6 (France) to euro31.7 (Portugal) per visit. Patients incur considerable costs when visiting anticoagulation clinics, and these costs vary by country. The results suggest the importance of taking a broad economic perspective when considering the cost-effectiveness of warfarin.

Advanced imaging of the macrostructure and microstructure of bone

NASA Technical Reports Server (NTRS)

Genant, H. K.; Gordon, C.; Jiang, Y.; Link, T. M.; Hans, D.; Majumdar, S.; Lang, T. F.

2000-01-01

Noninvasive and/or nondestructive techniques are capable of providing more macro- or microstructural information about bone than standard bone densitometry. Although the latter provides important information about osteoporotic fracture risk, numerous studies indicate that bone strength is only partially explained by bone mineral density. Quantitative assessment of macro- and microstructural features may improve our ability to estimate bone strength. The methods available for quantitatively assessing macrostructure include (besides conventional radiographs) quantitative computed tomography (QCT) and volumetric quantitative computed tomography (vQCT). Methods for assessing microstructure of trabecular bone noninvasively and/or nondestructively include high-resolution computed tomography (hrCT), micro-computed tomography (muCT), high-resolution magnetic resonance (hrMR), and micromagnetic resonance (muMR). vQCT, hrCT and hrMR are generally applicable in vivo; muCT and muMR are principally applicable in vitro. Although considerable progress has been made in the noninvasive and/or nondestructive imaging of the macro- and microstructure of bone, considerable challenges and dilemmas remain. From a technical perspective, the balance between spatial resolution versus sampling size, or between signal-to-noise versus radiation dose or acquisition time, needs further consideration, as do the trade-offs between the complexity and expense of equipment and the availability and accessibility of the methods. The relative merits of in vitro imaging and its ultrahigh resolution but invasiveness versus those of in vivo imaging and its modest resolution but noninvasiveness also deserve careful attention. From a clinical perspective, the challenges for bone imaging include balancing the relative advantages of simple bone densitometry against the more complex architectural features of bone or, similarly, the deeper research requirements against the broader clinical needs. The considerable potential biological differences between the peripheral appendicular skeleton and the central axial skeleton have to be addressed further. Finally, the relative merits of these sophisticated imaging techniques have to be weighed with respect to their applications as diagnostic procedures requiring high accuracy or reliability on one hand and their monitoring applications requiring high precision or reproducibility on the other. Copyright 2000 S. Karger AG, Basel.

Key Differences in Operating a Rover on the Moon vs. Mars

NASA Technical Reports Server (NTRS)

Trimble, Jay

2017-01-01

The command and control model for spacecraft operations, as well as the distribution of tasks between ground assets and in space assets, whether with a crew or solely robotic, is fundamentally constrained by the round trip light time between the space asset and the control facility (presumably on Earth, though not required). For an asset on Mars, the round trip light time varies, from roughly fourteen minutes to up to forty minutes. For a Lunar asset the round-trip light time is measured in only a few seconds, but current communications systems may more than double the latency with system overhead. For a Lunar Asset the total command latency may range from six seconds to more than forty, depending on communications overhead and data rates. Further, these variables are not always predictable, thus complicating operations. There are several differentiating factors for Lunar vs. Mars operations, Round trip light time/Atmosphere/Lighting and ShadowsTerrain type and knowledge/Round trip light time has implications for the distribution of tasks between ground and in space assets. Even at Lunar Distances, the combination of round trip light time plus communications systems overhead does not enable joy stick driving of a rover. The best that can be done, if driving from Earth, is near real time command and control. By 2030, driving from in space may be possible. Productivity on Mars requires either long operational sequences of commands, as is done for current rovers such as Curiosity, significant autonomous capability or, as may be possible by 2030, command and control support from space. Another implication of the long round trip light time from Earth to Mars, is that flight software functions must be resident on the in space asset. On the Moon, there is considerably more flexibility, enabling processing functions, to be resident on Earth or in space. This provides the opportunity to take advantage of the considerable processing power available on the ground, but may be constrained by data rates. On the Moon, for practical operational purposes, there is no atmosphere. Hence there is no scattering of light in the shadows. This has implications for image interpretation and driving near the poles. The Moon has permanently shadowed regions (PSR), unique terrain with unknown surface properties. With no scattering of light in shadows, driving on the Moon, particularly at the poles, where we have strong evidence of water, may prove to be hazardous and complex, requiring non-optical sensors, such as LIDAR.

Regulatory Aspects of Optical Methods and Exogenous Targets for Cancer Detection.

PubMed

Tummers, Willemieke S; Warram, Jason M; Tipirneni, Kiranya E; Fengler, John; Jacobs, Paula; Shankar, Lalitha; Henderson, Lori; Ballard, Betsy; Pogue, Brian W; Weichert, Jamey P; Bouvet, Michael; Sorger, Jonathan; Contag, Christopher H; Frangioni, John V; Tweedle, Michael F; Basilion, James P; Gambhir, Sanjiv S; Rosenthal, Eben L

2017-05-01

Considerable advances in cancer-specific optical imaging have improved the precision of tumor resection. In comparison to traditional imaging modalities, this technology is unique in its ability to provide real-time feedback to the operating surgeon. Given the significant clinical implications of optical imaging, there is an urgent need to standardize surgical navigation tools and contrast agents to facilitate swift regulatory approval. Because fluorescence-enhanced surgery requires a combination of both device and drug, each may be developed in conjunction, or separately, which are important considerations in the approval process. This report is the result of a one-day meeting held on May 4, 2016 with officials from the National Cancer Institute, the FDA, members of the American Society of Image-Guided Surgery, and members of the World Molecular Imaging Society, which discussed consensus methods for FDA-directed human testing and approval of investigational optical imaging devices as well as contrast agents for surgical applications. The goal of this workshop was to discuss FDA approval requirements and the expectations for approval of these novel drugs and devices, packaged separately or in combination, within the context of optical surgical navigation. In addition, the workshop acted to provide clarity to the research community on data collection and trial design. Reported here are the specific discussion items and recommendations from this critical and timely meeting. Cancer Res; 77(9); 2197-206. ©2017 AACR . ©2017 American Association for Cancer Research.

Reliability of fitness tests using methods and time periods common in sport and occupational management.

PubMed

Burnstein, Bryan D; Steele, Russell J; Shrier, Ian

2011-01-01

Fitness testing is used frequently in many areas of physical activity, but the reliability of these measurements under real-world, practical conditions is unknown. To evaluate the reliability of specific fitness tests using the methods and time periods used in the context of real-world sport and occupational management. Cohort study. Eighteen different Cirque du Soleil shows. Cirque du Soleil physical performers who completed 4 consecutive tests (6-month intervals) and were free of injury or illness at each session (n = 238 of 701 physical performers). Performers completed 6 fitness tests on each assessment date: dynamic balance, Harvard step test, handgrip, vertical jump, pull-ups, and 60-second jump test. We calculated the intraclass coefficient (ICC) and limits of agreement between baseline and each time point and the ICC over all 4 time points combined. Reliability was acceptable (ICC > 0.6) over an 18-month time period for all pairwise comparisons and all time points together for the handgrip, vertical jump, and pull-up assessments. The Harvard step test and 60-second jump test had poor reliability (ICC < 0.6) between baseline and other time points. When we excluded the baseline data and calculated the ICC for 6-month, 12-month, and 18-month time points, both the Harvard step test and 60-second jump test demonstrated acceptable reliability. Dynamic balance was unreliable in all contexts. Limit-of-agreement analysis demonstrated considerable intraindividual variability for some tests and a learning effect by administrators on others. Five of the 6 tests in this battery had acceptable reliability over an 18-month time frame, but the values for certain individuals may vary considerably from time to time for some tests. Specific tests may require a learning period for administrators.

Models of compacted fine-grained soils used as mineral liner for solid waste

NASA Astrophysics Data System (ADS)

Sivrikaya, Osman

2008-02-01

To prevent the leakage of pollutant liquids into groundwater and sublayers, the compacted fine-grained soils are commonly utilized as mineral liners or a sealing system constructed under municipal solid waste and other containment hazardous materials. This study presents the correlation equations of the compaction parameters required for construction of a mineral liner system. The determination of the characteristic compaction parameters, maximum dry unit weight ( γ dmax) and optimum water content ( w opt) requires considerable time and great effort. In this study, empirical models are described and examined to find which of the index properties correlate well with the compaction characteristics for estimating γ dmax and w opt of fine-grained soils at the standard compactive effort. The compaction data are correlated with different combinations of gravel content ( G), sand content ( S), fine-grained content (FC = clay + silt), plasticity index ( I p), liquid limit ( w L) and plastic limit ( w P) by performing multilinear regression (MLR) analyses. The obtained correlations with statistical parameters are presented and compared with the previous studies. It is found that the maximum dry unit weight and optimum water content have a considerably good correlation with plastic limit in comparison with liquid limit and plasticity index.

Comparison of lossless compression techniques for prepress color images

NASA Astrophysics Data System (ADS)

Van Assche, Steven; Denecker, Koen N.; Philips, Wilfried R.; Lemahieu, Ignace L.

1998-12-01

In the pre-press industry color images have both a high spatial and a high color resolution. Such images require a considerable amount of storage space and impose long transmission times. Data compression is desired to reduce these storage and transmission problems. Because of the high quality requirements in the pre-press industry only lossless compression is acceptable. Most existing lossless compression schemes operate on gray-scale images. In this case the color components of color images must be compressed independently. However, higher compression ratios can be achieved by exploiting inter-color redundancies. In this paper we present a comparison of three state-of-the-art lossless compression techniques which exploit such color redundancies: IEP (Inter- color Error Prediction) and a KLT-based technique, which are both linear color decorrelation techniques, and Interframe CALIC, which uses a non-linear approach to color decorrelation. It is shown that these techniques are able to exploit color redundancies and that color decorrelation can be done effectively and efficiently. The linear color decorrelators provide a considerable coding gain (about 2 bpp) on some typical prepress images. The non-linear interframe CALIC predictor does not yield better results, but the full interframe CALIC technique does.

Coal hydrogenation and environmental health.

PubMed Central

Wadden, R A

1976-01-01

Planning of coal hydrogenation processes, such as liquifaction and gasification, requires consideration of public health implications. Commercial plants will require coal quantities greater than or equal to 20,000 tons/day and the large size of these plants calls for careful consideration of the potential health hazards from the wastes and products of such processes. Analysis of pollution potential can roughly be divided into three categories: raw material structure and constituents, process design, and mode of plant operation. Identifiable pollutants include hydrogen cyanide, phenols, cresols, carbonyl and hydrogen sulfides, ammonia, mercaptans, thiocyanides, aniline, arsenic, trace metals and various polycyclic hydrocarbons. One study of workers in a hydrogenation process has revealed an incidence of skin cancer 16-37 times that expected in the chemical industry. In addition, a number of high boiling point liquid products were identified as being carcinogenic, and air concentrations of benzo[a]pyrene up to 18,000 mug/1000 m3 were reported. Health statistics on occupational groups in other coal conversion industries have shown significantly higher lung cancer rates, relative to groups without such occupational exposures. These data suggest that coal hydrogenation plants must be carefully planned and controlled to avoid harm to environmentally and occupationally exposed populations. PMID:789066

Do future commercial broadband communication satellites really need laser-communication intersatellite links (ISLs)?

NASA Astrophysics Data System (ADS)

Freidell, James E.

1997-04-01

Large commercial satellite programs requiring ISLs are growing in number and maturing. An important segment of the commercial satellite market, and its ISL needs, is discussed in the paper. ISL value will increase as long-haul terrestrial backbones become increasingly congested. Providing interregional and intercontinental connectivity via ISL presents far lower cost and fewer problems than relying on terrestrial fiber-optic networks. To demonstrate this, a new metric is proposed which allows 'apples-to- apples' cost/performance comparisons between laser communications in GEO, LEO, and terrestrial fiber-optics. ISL requirements in to the next decade are predicted >= 50-100 Gb/s full duplex. Many attitudinal changes must be embraced among those who choose to focus on this new commercial business. Foremost among these is a preponderance to delivering fully acceptable hardware fast and at low cost, as opposed to merely designing such. Considerable attention must be given business considerations foreign to professionals who have spent time in the government or government contracting sectors. Successful ISL customers will come to recognize that ISLs are not commodity products. Failure to embrace these attitudes will nonetheless constitute decision to which the commercial market, and particularly the financial market, will appropriately respond.

Case for real-time systems development - Quo vadis?

NASA Technical Reports Server (NTRS)

Erb, Dona M.

1991-01-01

The paper focuses on the distinctive issues of computer-aided software engineering (CASE) products for the development of real-time systems. CASE technologies and associated standardization efforts are evolving from sets of conflicting interests. The majority of case products are intended for use in the development of management information systems. CASE products to support the development of large, complex real-time systems must provide additional capabilities. Generic concerns include the quality of the implementation of the required method for the phase of the system's development and whether the vendor is stable and committed to evolving the products in parallel with nonproprietary standards. The CASE market is undergoing considerable consolidation. The paper describes the major forces, cooperating entities, and remaining uncertainties that need to be weighed in near-term CASE procurements to limit risk of loss of investment in project time, trianing, and money.

Influence of non steady gravity on natural convection during micro-gravity solidification of semiconductors. I - Time scale analysis. II - Implications for crystal growth experiments

NASA Technical Reports Server (NTRS)

Griffin, P. R.; Motakef, S.

1989-01-01

Consideration is given to the influence of temporal variations in the magnitude of gravity on natural convection during unidirectional solidification of semiconductors. It is shown that the response time to step changes in g at low Rayleigh numbers is controlled by the momentum diffusive time scale. At higher Rayleigh numbers, the response time to increases in g is reduced because of inertial effects. The degree of perturbation of flow fields by transients in the gravitational acceleration on the Space Shuttle and the Space Station is determined. The analysis is used to derive the requirements for crystal growth experiments conducted on low duration low-g vehicles. Also, the effectiveness of sounding rockets and KC-135 aircraft for microgravity experiments is examined.

Volumetric glioma quantification: comparison of manual and semi-automatic tumor segmentation for the quantification of tumor growth.

PubMed

Odland, Audun; Server, Andres; Saxhaug, Cathrine; Breivik, Birger; Groote, Rasmus; Vardal, Jonas; Larsson, Christopher; Bjørnerud, Atle

2015-11-01

Volumetric magnetic resonance imaging (MRI) is now widely available and routinely used in the evaluation of high-grade gliomas (HGGs). Ideally, volumetric measurements should be included in this evaluation. However, manual tumor segmentation is time-consuming and suffers from inter-observer variability. Thus, tools for semi-automatic tumor segmentation are needed. To present a semi-automatic method (SAM) for segmentation of HGGs and to compare this method with manual segmentation performed by experts. The inter-observer variability among experts manually segmenting HGGs using volumetric MRIs was also examined. Twenty patients with HGGs were included. All patients underwent surgical resection prior to inclusion. Each patient underwent several MRI examinations during and after adjuvant chemoradiation therapy. Three experts performed manual segmentation. The results of tumor segmentation by the experts and by the SAM were compared using Dice coefficients and kappa statistics. A relatively close agreement was seen among two of the experts and the SAM, while the third expert disagreed considerably with the other experts and the SAM. An important reason for this disagreement was a different interpretation of contrast enhancement as either surgically-induced or glioma-induced. The time required for manual tumor segmentation was an average of 16 min per scan. Editing of the tumor masks produced by the SAM required an average of less than 2 min per sample. Manual segmentation of HGG is very time-consuming and using the SAM could increase the efficiency of this process. However, the accuracy of the SAM ultimately depends on the expert doing the editing. Our study confirmed a considerable inter-observer variability among experts defining tumor volume from volumetric MRIs. © The Foundation Acta Radiologica 2014.

Labour time required for piglet castration with isoflurane-anaesthesia using shared and stationary inhaler devices.

PubMed

Weber, Sabrina; Das, Gürbüz; Waldmann, Karl-Heinz; Gauly, Matthias

2014-01-01

Isoflurane-anaesthesia combined with an analgesic represents a welfare-friendly method of pain mitigation for castration of piglets. However, it requires an inhaler device, which is uneconomic for small farms. Sharing a device among farms may be an economical option if the shared use does not increase labour time and the resulting costs. This study aimed to investigate the amount and components of labour time required for piglet castration with isoflurane anaesthesia performed with stationary and shared devices. Piglets (N = 1579) were anaesthetised with isoflurane (using either stationary or shared devices) and castrated.The stationary devices were used in a group (n = 5) of larger farms (84 sows/farm on an average), whereas smaller farms (n = 7; 32 sows/farm on an average) shared one device. Each farm was visited four times and labour time for each process-step was recorded. The complete process included machine set-up, anaesthesia and castration by a practitioner, and preparation, collection and transport of piglets by a farmer. Labour time of the complete process was increased (P = 0.012) on farms sharing a device (266 s/piglet) compared to farms using stationary devices (177 s/ piglet), due to increased time for preparation (P = 0.055), castration (P = 0.026) and packing (P = 0.010) when sharing a device. However, components of the time budget of farms using stationary or shared devices did not differ significantly (P > 0.05). Cost arising from time spent by farmers did not differ considerably between the use of stationary (0.28 Euro per piglet) and shared (0.26 Euro) devices. It is concluded that costs arising from the increased labour time due to sharing a device can be considered marginal, since the high expenses originating from purchasing an inhaler device are shared among several farms.

Treatment of Urothelial Cancer in Elderly Patients: Focus on Immune Checkpoint Inhibitors.

PubMed

Jodon, Gray; Fischer, Stacy M; Kessler, Elizabeth R

2018-05-09

Urothelial carcinoma, or bladder cancer, is a malignancy that most commonly affects older patients. The median age at diagnosis is 73 years, and care of these patients requires consideration not just of the disease-related factors such as stage and histology, but also of patient-related factors. Many of these patients have concurrent medical morbidities and additional changes related to the aging process. Older patients with cancer are a unique population requiring additional considerations and assessment in treatment decision-making. It is important to look beyond chronologic age. The traditional treatment for advanced disease has relied on platinum-based chemotherapy. These multi-agent regimens require consideration of baseline organ function as well as competing conditions that may heighten toxicity. The advent of a new class of cancer therapeutics, the immune checkpoint inhibitors, has changed the care of patients with advanced disease considerably. These immunotherapeutics have been approved for treating patients with disease progression on chemotherapy, or those who are ineligible (or unfit) to receive cisplatin-based therapy. This expansion of the population of patients eligible for treatment has great applicability to the unique considerations in an older patient population. In general, these new immunotherapies are well tolerated and effective in this group of patients.

Test techniques for determining laser ranging system performance

NASA Technical Reports Server (NTRS)

Zagwodzki, T. W.

1981-01-01

Procedures and results of an on going test program intended to evaluate laser ranging system performance levels in the field as well as in the laboratory are summarized. Tests show that laser ranging system design requires consideration of time biases and RMS jitters of individual system components. All simple Q switched lasers tested were found to be inadequate for 10 centimeter ranging systems. Timing discriminators operating over a typical 100:1 dynamic signal range may introduce as much as 7 to 9 centimeters of range bias. Time interval units commercially available today are capable of half centimeter performance and are adequate for all field systems currently deployed. Photomultipliers tested show typical tube time biases of one centimeter with single photoelectron transit time jitter of approximately 10 centimeters. Test results demonstrate that NASA's Mobile Laser Ranging System (MOBLAS) receiver configuration is limiting system performance below the 100 photoelectron level.

Predicting Operator Execution Times Using CogTool

NASA Technical Reports Server (NTRS)

Santiago-Espada, Yamira; Latorella, Kara A.

2013-01-01

Researchers and developers of NextGen systems can use predictive human performance modeling tools as an initial approach to obtain skilled user performance times analytically, before system testing with users. This paper describes the CogTool models for a two pilot crew executing two different types of a datalink clearance acceptance tasks, and on two different simulation platforms. The CogTool time estimates for accepting and executing Required Time of Arrival and Interval Management clearances were compared to empirical data observed in video tapes and registered in simulation files. Results indicate no statistically significant difference between empirical data and the CogTool predictions. A population comparison test found no significant differences between the CogTool estimates and the empirical execution times for any of the four test conditions. We discuss modeling caveats and considerations for applying CogTool to crew performance modeling in advanced cockpit environments.

Characterizing site specific considerations for protecting aircraft during LGS operations at W. M. Keck Observatory

NASA Astrophysics Data System (ADS)

Stomski, Paul J., Jr.; Campbell, Randy; McCann, Kevin; Shimko, Steve

2010-07-01

W. M. Keck Observatory (WMKO) routinely operates laser guide star (LGS) Adaptive Optics (AO) systems at the telescope facility on the Big Island of Hawaii. One of the operational requirements for the LGS system is that a safety system to prevent nearby aircraft from being adversely affected by the laser must be provided. We will support operations in the near term with human aircraft spotters until we can successfully develop and get the appropriate approvals needed for an Automated, Integrated and Reliable System for an Aircraft Friendly Environment (AIRSAFE). This report describes some of the preliminary requirements development work at WMKO in support of the future development of AIRSAFE. We discuss the results of recent work to characterize site specific considerations that impact requirements development. The site specific considerations include the proximity of WMKO laser operations to nearby commercial airports, the implications of military operations in the area and the character of the air traffic volume and flight patterns over the telescope facility. Finally, we discuss how the design and implementation of AIRSAFE will be impacted by these site specific considerations.

Lagrangian descriptors in dissipative systems.

PubMed

Junginger, Andrej; Hernandez, Rigoberto

2016-11-09

The reaction dynamics of time-dependent systems can be resolved through a recrossing-free dividing surface associated with the transition state trajectory-that is, the unique trajectory which is bound to the barrier region for all time in response to a given time-dependent potential. A general procedure based on the minimization of Lagrangian descriptors has recently been developed by Craven and Hernandez [Phys. Rev. Lett., 2015, 115, 148301] to construct this particular trajectory without requiring perturbative expansions relative to the naive transition state point at the top of the barrier. The extension of the method to account for dissipation in the equations of motion requires additional considerations established in this paper because the calculation of the Lagrangian descriptor involves the integration of trajectories in forward and backward time. The two contributions are in general very different because the friction term can act as a source (in backward time) or sink (in forward time) of energy, leading to the possibility that information about the phase space structure may be lost due to the dominance of only one of the terms. To compensate for this effect, we introduce a weighting scheme within the Lagrangian descriptor and demonstrate that for thermal Langevin dynamics it preserves the essential phase space structures, while they are lost in the nonweighted case.

Cortical Specializations Underlying Fast Computations

PubMed Central

Volgushev, Maxim

2016-01-01

The time course of behaviorally relevant environmental events sets temporal constraints on neuronal processing. How does the mammalian brain make use of the increasingly complex networks of the neocortex, while making decisions and executing behavioral reactions within a reasonable time? The key parameter determining the speed of computations in neuronal networks is a time interval that neuronal ensembles need to process changes at their input and communicate results of this processing to downstream neurons. Theoretical analysis identified basic requirements for fast processing: use of neuronal populations for encoding, background activity, and fast onset dynamics of action potentials in neurons. Experimental evidence shows that populations of neocortical neurons fulfil these requirements. Indeed, they can change firing rate in response to input perturbations very quickly, within 1 to 3 ms, and encode high-frequency components of the input by phase-locking their spiking to frequencies up to 300 to 1000 Hz. This implies that time unit of computations by cortical ensembles is only few, 1 to 3 ms, which is considerably faster than the membrane time constant of individual neurons. The ability of cortical neuronal ensembles to communicate on a millisecond time scale allows for complex, multiple-step processing and precise coordination of neuronal activity in parallel processing streams, while keeping the speed of behavioral reactions within environmentally set temporal constraints. PMID:25689988

An Automated Blur Detection Method for Histological Whole Slide Imaging

PubMed Central

Moles Lopez, Xavier; D'Andrea, Etienne; Barbot, Paul; Bridoux, Anne-Sophie; Rorive, Sandrine; Salmon, Isabelle; Debeir, Olivier; Decaestecker, Christine

2013-01-01

Whole slide scanners are novel devices that enable high-resolution imaging of an entire histological slide. Furthermore, the imaging is achieved in only a few minutes, which enables image rendering of large-scale studies involving multiple immunohistochemistry biomarkers. Although whole slide imaging has improved considerably, locally poor focusing causes blurred regions of the image. These artifacts may strongly affect the quality of subsequent analyses, making a slide review process mandatory. This tedious and time-consuming task requires the scanner operator to carefully assess the virtual slide and to manually select new focus points. We propose a statistical learning method that provides early image quality feedback and automatically identifies regions of the image that require additional focus points. PMID:24349343

Spacecraft Design Considerations for Piloted Reentry and Landing

NASA Technical Reports Server (NTRS)

Stroud, Kenneth J.; Klaus, David M.

2006-01-01

With the end of the Space Shuttle era anticipated in this decade and the requirements for the Crew Exploration Vehicle (CEV) now being defined, an opportune window exists for incorporating 'lessons learned' from relevant aircraft and space flight experience into the early stages of designing the next generation of human spacecraft. This includes addressing not only the technological and overall mission challenges, but also taking into account the comprehensive effects that space flight has on the pilot, all of which must be balanced to ensure the safety of the crew. This manuscript presents a unique and timely overview of a multitude of competing, often unrelated, requirements and constraints governing spacecraft design that must be collectively considered in order to ensure the success of future space exploration missions.

NASA-EPA automotive thermal reactor technology program

NASA Technical Reports Server (NTRS)

Blankenship, C. P.; Hibbard, R. R.

1972-01-01

The status of the NASA-EPA automotive thermal reactor technology program is summarized. This program is concerned primarily with materials evaluation, reactor design, and combustion kinetics. From engine dynamometer tests of candidate metals and coatings, two ferritic iron alloys (GE 1541 and Armco 18-SR) and a nickel-base alloy (Inconel 601) offer promise for reactor use. None of the coatings evaluated warrant further consideration. Development studies on a ceramic thermal reactor appear promising based on initial vehicle road tests. A chemical kinetic study has shown that gas temperatures of at least 900 K to 1000 K are required for the effective cleanup of carbon monoxide and hydrocarbons, but that higher temperatures require shorter combustion times and thus may permit smaller reactors.

MEMS Based Micro Aerial Vehicles

NASA Astrophysics Data System (ADS)

Joshi, Niranjan; Köhler, Elof; Enoksson, Peter

2016-10-01

Designing a flapping wing insect robot requires understanding of insect flight mechanisms, wing kinematics and aerodynamic forces. These subsystems are interconnected and their dependence on one another affects the overall performance. Additionally it requires an artificial muscle like actuator and transmission to power the wings. Several kinds of actuators and mechanisms are candidates for this application with their own strengths and weaknesses. This article provides an overview of the insect scaled flight mechanism along with discussion of various methods to achieve the Micro Aerial Vehicle (MAV) flight. Ongoing projects in Chalmers is aimed at developing a low cost and low manufacturing time MAV. The MAV design considerations and design specifications are mentioned. The wings are manufactured using 3D printed carbon fiber and are under experimental study.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Libman, George H.; Doerry, Armin Walter

Brief disclosures may often be sufficient for the filing of a Technical Advance with Sandia's Intellectual Property Center, but still be inadequate to facilitate an optimum patent application where more detail and explanation are required. Consequently, the crafting of a patent application may require considerably more additional interaction between the application preparer and the inventors. This inefficiency can be considerably mitigated if the inventors address some critical aspects of a patent application when they write a technical report.

On the formation of granulites

USGS Publications Warehouse

Bohlen, S.R.

1991-01-01

The tectonic settings for the formation and evolution of regional granulite terranes and the lowermost continental crust can be deduced from pressure-temperature-time (P-T-time) paths and constrained by petrological and geophysical considerations. P-T conditions deduced for regional granulites require transient, average geothermal gradients of greater than 35??C km-1, implying minimum heat flow in excess of 100 mW m-2. Such high heat flow is probably caused by magmatic heating. Tectonic settings wherein such conditions are found include convergent plate margins, continental rifts, hot spots and at the margins of large, deep-seated batholiths. Cooling paths can be constrained by solid-solid and devolatilization equilibria and geophysical modelling. -from Author

The Design Manager's Aid for Intelligent Decomposition (DeMAID)

NASA Technical Reports Server (NTRS)

Rogers, James L.

1994-01-01

Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed, the proposed system can be decomposed to identify its hierarchical structure. The design manager's aid for intelligent decomposition (DeMAID) is a knowledge based system for ordering the sequence of modules and identifying a possible multilevel structure for design. Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save considerable money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined.

GPU Accelerated Prognostics

NASA Technical Reports Server (NTRS)

Gorospe, George E., Jr.; Daigle, Matthew J.; Sankararaman, Shankar; Kulkarni, Chetan S.; Ng, Eley

2017-01-01

Prognostic methods enable operators and maintainers to predict the future performance for critical systems. However, these methods can be computationally expensive and may need to be performed each time new information about the system becomes available. In light of these computational requirements, we have investigated the application of graphics processing units (GPUs) as a computational platform for real-time prognostics. Recent advances in GPU technology have reduced cost and increased the computational capability of these highly parallel processing units, making them more attractive for the deployment of prognostic software. We present a survey of model-based prognostic algorithms with considerations for leveraging the parallel architecture of the GPU and a case study of GPU-accelerated battery prognostics with computational performance results.

Thermoplastic Ribbon-Ply Bonding Model

NASA Technical Reports Server (NTRS)

Hinkley, Jeffrey A.; Marchello, Joseph M.; Messier, Bernadette C.

1996-01-01

The aim of the present work was to identify key variables in rapid weldbonding of thermoplastic tow (ribbon) and their relationship to matrix polymer properties and to ribbon microstructure. Theoretical models for viscosity, establishment of ply-ply contact, instantaneous (Velcro) bonding, molecular interdiffusion (healing), void growth suppression, and gap filling were reviewed and synthesized. Consideration of the theoretical bonding mechanisms and length scales and of the experimental weld/peel data allow the prediction of such quantities as the time and pressure required to achieve good contact between a ribbon and a flat substrate, the time dependence of bond strength, pressures needed to prevent void growth from dissolved moisture and conditions for filling gaps and smoothing overlaps.

Effects of the gaseous and liquid water content of the atmosphere on range delay and Doppler frequency

NASA Technical Reports Server (NTRS)

Flock, W. L.

1981-01-01

When high precision is required for range measurement on Earth space paths, it is necessary to correct as accurately as possible for excess range delays due to the dry air, water vapor, and liquid water content of the atmosphere. Calculations based on representative values of atmospheric parameters are useful for illustrating the order of magnitude of the expected delays. Range delay, time delay, and phase delay are simply and directly related. Doppler frequency variations or noise are proportional to the time rate of change of excess range delay. Tropospheric effects were examined as part of an overall consideration of the capability of precision two way ranging and Doppler systems.

40 CFR 1505.2 - Record of decision in cases requiring environmental impact statements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... alternatives based on relevant factors including economic and technical considerations and agency statutory missions. An agency shall identify and discuss all such factors including any essential considerations of...

Rapid protein concentration, efficient fluorescence labeling and purification on a micro/nanofluidics chip.

PubMed

Wang, Chen; Ouyang, Jun; Ye, De-Kai; Xu, Jing-Juan; Chen, Hong-Yuan; Xia, Xing-Hua

2012-08-07

Fluorescence analysis has proved to be a powerful detection technique for achieving single molecule analysis. However, it usually requires the labeling of targets with bright fluorescent tags since most chemicals and biomolecules lack fluorescence. Conventional fluorescence labeling methods require a considerable quantity of biomolecule samples, long reaction times and extensive chromatographic purification procedures. Herein, a micro/nanofluidics device integrating a nanochannel in a microfluidics chip has been designed and fabricated, which achieves rapid protein concentration, fluorescence labeling, and efficient purification of product in a miniaturized and continuous manner. As a demonstration, labeling of the proteins bovine serum albumin (BSA) and IgG with fluorescein isothiocyanate (FITC) is presented. Compared to conventional methods, the present micro/nanofluidics device performs about 10(4)-10(6) times faster BSA labeling with 1.6 times higher yields due to the efficient nanoconfinement effect, improved mass, and heat transfer in the chip device. The results demonstrate that the present micro/nanofluidics device promises rapid and facile fluorescence labeling of small amount of reagents such as proteins, nucleic acids and other biomolecules with high efficiency.

Design of an MR image processing module on an FPGA chip.

PubMed

Li, Limin; Wyrwicz, Alice M

2015-06-01

We describe the design and implementation of an image processing module on a single-chip Field-Programmable Gate Array (FPGA) for real-time image processing. We also demonstrate that through graphical coding the design work can be greatly simplified. The processing module is based on a 2D FFT core. Our design is distinguished from previously reported designs in two respects. No off-chip hardware resources are required, which increases portability of the core. Direct matrix transposition usually required for execution of 2D FFT is completely avoided using our newly-designed address generation unit, which saves considerable on-chip block RAMs and clock cycles. The image processing module was tested by reconstructing multi-slice MR images from both phantom and animal data. The tests on static data show that the processing module is capable of reconstructing 128×128 images at speed of 400 frames/second. The tests on simulated real-time streaming data demonstrate that the module works properly under the timing conditions necessary for MRI experiments. Copyright © 2015 Elsevier Inc. All rights reserved.

An investigation of bubble coalescence and post-rupture oscillation in non-ionic surfactant solutions using high-speed cinematography.

PubMed

Bournival, G; Ata, S; Karakashev, S I; Jameson, G J

2014-01-15

Most processes involving bubbling in a liquid require small bubbles to maximise mass/energy transfer. A common method to prevent bubbles from coalescing is by the addition of surfactants. In order to get an insight into the coalescence process, capillary bubbles were observed using a high speed cinematography. Experiments were performed in solutions of 1-pentanol, 4-methyl-2-pentanol, tri(propylene glycol) methyl ether, and poly(propylene glycol) for which information such as the coalescence time and the deformation of the resultant bubble upon coalescence was extracted. It is shown in this study that the coalescence time increases with surfactant concentration until the appearance of a plateau. The increase in coalescence time with surfactant concentration could not be attributed only to surface elasticity. The oscillation of the resultant bubble was characterised by the damping of the oscillation. The results suggested that a minimum elasticity is required to achieve an increased damping and considerable diffusion has a detrimental effect on the dynamic response of the bubble, thereby reducing the damping. Copyright © 2013 Elsevier Inc. All rights reserved.

Accretion of the terrestrial planets. II

NASA Technical Reports Server (NTRS)

Weidenschilling, S. J.

1976-01-01

The theory of gravitational accretion of the terrestrial planets is examined. The concept of a 'closed feeding zone' is somewhat unrealistic, but provides a lower bound on the accretion time. A velocity relation for planetesimals which includes an initial velocity component is suggested. The orbital parameters of the planetesimals and the dimensions of the feeding zone are related to their relative velocities. The assumption of an initial velocity does not seriously change the accretion time. Mercury, Venus, and the earth have accretion times on the order of 100 million years. Mars requires well over one billion years to accrete by the same assumptions. The lunar cratering history makes a late formation of Mars unlikely. If Mars is as old as the earth, nongravitational forces or a violation of the feeding zone concept is required. One such possibility is the removal of matter from the zone of Mars by Jupiter's influence. The final sweeping up by Mars would result in the scattering of a considerable mass among the other terrestrial planets. The late postaccretional bombardments inferred for the moon and Mercury may have had this source.

Corrosion/erosion detection of boiler tubes utilizing pulsed infrared imaging

NASA Astrophysics Data System (ADS)

Bales, Maurice J.; Bishop, Chip C.

1995-05-01

This paper discusses a new technique for locating and detecting wall thickness reduction in boiler tubes caused by erosion/corrosion. Traditional means for this type of defect detection utilizes ultrasonics (UT) to perform a point by point measurement at given intervals of the tube length, which requires extensive and costly shutdown or `outage' time to complete the inspection, and has led to thin areas going undetected simply because they were located in between the sampling points. Pulsed infrared imaging (PII) can provide nearly 100% inspection of the tubes in a fraction of the time needed for UT. The IR system and heat source used in this study do not require any special access or fixed scaffolding, and can be remotely operated from a distance of up to 100 feet. This technique has been tried experimentally in a laboratory environment and verified in an actual field application. Since PII is a non-contact technique, considerable time and cost savings should be realized as well as the ability to predict failures rather than repairing them once they have occurred.

Design Improvements and X-Ray Performance of a Time Projection Chamber Polarimeter for Persistent Astronomical Sources

NASA Technical Reports Server (NTRS)

Hill, Joanne E.; Black, J. Kevin; Emmett, Thomas J.; Enoto, Teruaki; Jahoda, Keith M.; Kaaret, Philip; Nolan, David S.; Tamagawa, Toru

2014-01-01

The design of the Time-Projection Chamber (TPC) Polarimeter for the Gravity and Extreme Magnetism Small Explorer (GEMS) was demonstrated to Technology Readiness Level 6 (TRL-6)3 and the flight detectors fabricated, assembled and performance tested. A single flight detector was characterized at the Brookhaven National Laboratory Synchrotron Light Source with polarized X-rays at 10 energies from 2.3-8.0 keV at five detector positions. The detector met all of the GEMS performance requirements. Lifetime measurements have shown that the existing flight design has 23 years of lifetime4, opening up the possibility of relaxing material requirements, in particular the consideration of the use of epoxy, to reduce risk elsewhere. We report on design improvements to the GEMS detector to enable a narrower transfer gap that, when operated with a lower transfer field, reduces asymmetries in the detector response. In addition, the new design reduces cost and risk by simplifying the assembly and reducing production time. Finally, we report on the performance of the narrow-gap detector in response to polarized and unpolarized X-rays.

The adaption and use of research codes for performance assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liebetrau, A.M.

1987-05-01

Models of real-world phenomena are developed for many reasons. The models are usually, if not always, implemented in the form of a computer code. The characteristics of a code are determined largely by its intended use. Realizations or implementations of detailed mathematical models of complex physical and/or chemical processes are often referred to as research or scientific (RS) codes. Research codes typically require large amounts of computing time. One example of an RS code is a finite-element code for solving complex systems of differential equations that describe mass transfer through some geologic medium. Considerable computing time is required because computationsmore » are done at many points in time and/or space. Codes used to evaluate the overall performance of real-world physical systems are called performance assessment (PA) codes. Performance assessment codes are used to conduct simulated experiments involving systems that cannot be directly observed. Thus, PA codes usually involve repeated simulations of system performance in situations that preclude the use of conventional experimental and statistical methods. 3 figs.« less

Senior academic physicians and retirement considerations.

PubMed

Moss, Arthur J; Greenberg, Henry; Dwyer, Edward M; Klein, Helmut; Ryan, Daniel; Francis, Charles; Marcus, Frank; Eberly, Shirley; Benhorin, Jesaia; Bodenheimer, Monty; Brown, Mary; Case, Robert; Gillespie, John; Goldstein, Robert; Haigney, Mark; Krone, Ronald; Lichstein, Edgar; Locati, Emanuela; Oakes, David; Thomsen, Poul Erik Bloch; Zareba, Wojciech

2013-01-01

An increasing number of academic senior physicians are approaching their potential retirement in good health with accumulated clinical and research experience that can be a valuable asset to an academic institution. Considering the need to let the next generation ascend to leadership roles, when and how should a medical career be brought to a close? We explore the roles for academic medical faculty as they move into their senior years and approach various retirement options. The individual and institutional considerations require a frank dialogue among the interested parties to optimize the benefits while minimizing the risks for both. In the United States there is no fixed age for retirement as there is in Europe, but European physicians are initiating changes. What is certain is that careful planning, innovative thinking, and the incorporation of new patterns of medical practice are all part of this complex transition and timing of senior academic physicians into retirement. Copyright © 2013 Elsevier Inc. All rights reserved.

PEMFC MEA and System Design Considerations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knights, Shanna; Bashyam, Rajesh; He, Ping

2011-07-01

Proton exchange membrane fuel cells (PEMFCs) are being developed and sold commercially for multiple near term markets. Ballard Power Systems is focused on the near term markets of backup power, distributed generation, materials handling, and buses. Significant advances have been made in cost and durability of fuel cell products. Improved tolerance to a wide range of system operation and environmental noises will enable increased viability across a broad range of applications. In order to apply the most effective membrane electrode assembly (MEA) design for each market, the system requirements and associated MEA failures must be well understood. The failure modesmore » associated with the electrodes and membrane degradation are discussed with respect to associated system operation and mitigating approaches. A few key system considerations that influence MEA design include expected fuel quality, balance-of-plant materials, time under idle or open circuit operation, and start-up and shut-down conditions.« less

Plasma Vehicle Charging Analysis for Orion Flight Test 1

NASA Technical Reports Server (NTRS)

Lallement, L.; McDonald, T.; Norgard, J.; Scully, B.

2014-01-01

In preparation for the upcoming experimental test flight for the Orion crew module, considerable interest was raised over the possibility of exposure to elevated levels of plasma activity and vehicle charging both externally on surfaces and internally on dielectrics during the flight test orbital operations. Initial analysis using NASCAP-2K indicated very high levels of exposure, and this generated additional interest in refining/defining the plasma and spacecraft models used in the analysis. This refinement was pursued, resulting in the use of specific AE8 and AP8 models, rather than SCATHA models, as well as consideration of flight trajectory, time duration, and other parameters possibly affecting the levels of exposure and the magnitude of charge deposition. Analysis using these refined models strongly indicated that, for flight test operations, no special surface coatings were necessary for the thermal protection system, but would definitely be required for future GEO, trans-lunar, and extra-lunar missions...

Importance of limiting hohlraum leaks at cryogenic temperatures on NIF targets

DOE PAGES

Bhandarkar, Suhas; Teslich, Nick; Haid, Ben; ...

2017-08-18

Inertial confinement fusion targets are complex systems designed to allow fine control of temperature and pressure for making precise spherical ice layers of hydrogen isotopes at cryogenic temperatures. We discuss the various technical considerations for a maximum leak rate based on heat load considerations. This maximum flow rate turns out to bemore » $$5\\times 10^{-6}$$ standard cc per second, which can be caused by an orifice less than half a micron in diameter. This makes the identification of the location and resolution of the leak a significant challenge. To illustrate this, we showcase one example of a peculiar failure mode that appeared suddenly but persisted whereby target production yield was severely lowered. Identification of the leak source and the root cause requires very careful analysis of multiple thermomechanical aspects to ensure that the end solution is indeed the right remedy and is robust.« less

Plasma Vehicle Charging Analysis for Orion Flight Test 1

NASA Technical Reports Server (NTRS)

Scully, B.; Norgard, J.

2015-01-01

In preparation for the upcoming experimental test flight for the Orion crew module, considerable interest was raised over the possibility of exposure to elevated levels of plasma activity and vehicle charging both externally on surfaces and internally on dielectrics during the flight test orbital operations. Initial analysis using NASCAP-2K indicated very high levels of exposure, and this generated additional interest in refining/defining the plasma and spacecraft models used in the analysis. This refinement was pursued, resulting in the use of specific AE8 and AP8 models, rather than SCATHA models, as well as consideration of flight trajectory, time duration, and other parameters possibly affecting the levels of exposure and the magnitude of charge deposition. Analysis using these refined models strongly indicated that, for flight test operations, no special surface coatings were necessary for the Thermal Protection System (TPS), but would definitely be required for future GEO, trans-lunar, and extra-lunar missions.

Scaling Analysis of Alloy Solidification and Fluid Flow in a Rectangular Cavity

NASA Astrophysics Data System (ADS)

Plotkowski, A.; Fezi, K.; Krane, M. J. M.

A scaling analysis was performed to predict trends in alloy solidification in a side-cooled rectangular cavity. The governing equations for energy and momentum were scaled in order to determine the dependence of various aspects of solidification on the process parameters for a uniform initial temperature and an isothermal boundary condition. This work improved on previous analyses by adding considerations for the cooling bulk fluid flow. The analysis predicted the time required to extinguish the superheat, the maximum local solidification time, and the total solidification time. The results were compared to a numerical simulation for a Al-4.5 wt.% Cu alloy with various initial and boundary conditions. Good agreement was found between the simulation results and the trends predicted by the scaling analysis.

A flood lamination strategy based on transportation network with time delay.

PubMed

Nouasse, H; Chiron, P; Archimède, B

2013-01-01

Over the last few years, the frequency and intensity of floods has become more marked due to the influence of climate change. The engendered problems are related to the safety of goods and persons. These considerations require predictive management that will limit water height downstream. In the literature, numerous works have described flow modeling and management. The work presented in this paper is interested in quantitative management by means of flood expansion areas placed along the river and for which we have size and location. The performance of the management system depends on the time and height of gate opening, which will influence wave mitigation. The proposed management method is based on use of a transportation network with time delay from which the volume of water to be stored is calculated.

Cortical Action Potential Backpropagation Explains Spike Threshold Variability and Rapid-Onset Kinetics

PubMed Central

Yu, Yuguo; Shu, Yousheng; McCormick, David A.

2008-01-01

Neocortical action potential responses in vivo are characterized by considerable threshold variability, and thus timing and rate variability, even under seemingly identical conditions. This finding suggests that cortical ensembles are required for accurate sensorimotor integration and processing. Intracellularly, trial-to-trial variability results not only from variation in synaptic activities, but also in the transformation of these into patterns of action potentials. Through simultaneous axonal and somatic recordings and computational simulations, we demonstrate that the initiation of action potentials in the axon initial segment followed by backpropagation of these spikes throughout the neuron results in a distortion of the relationship between the timing of synaptic and action potential events. In addition, this backpropagation also results in an unusually high rate of rise of membrane potential at the foot of the action potential. The distortion of the relationship between the amplitude time course of synaptic inputs and action potential output caused by spike back-propagation results in the appearance of high spike threshold variability at the level of the soma. At the point of spike initiation, the axon initial segment, threshold variability is considerably less. Our results indicate that spike generation in cortical neurons is largely as expected by Hodgkin—Huxley theory and is more precise than previously thought. PMID:18632930

Sound Clocks and Sonic Relativity

NASA Astrophysics Data System (ADS)

Todd, Scott L.; Menicucci, Nicolas C.

2017-10-01

Sound propagation within certain non-relativistic condensed matter models obeys a relativistic wave equation despite such systems admitting entirely non-relativistic descriptions. A natural question that arises upon consideration of this is, "do devices exist that will experience the relativity in these systems?" We describe a thought experiment in which `acoustic observers' possess devices called sound clocks that can be connected to form chains. Careful investigation shows that appropriately constructed chains of stationary and moving sound clocks are perceived by observers on the other chain as undergoing the relativistic phenomena of length contraction and time dilation by the Lorentz factor, γ , with c the speed of sound. Sound clocks within moving chains actually tick less frequently than stationary ones and must be separated by a shorter distance than when stationary to satisfy simultaneity conditions. Stationary sound clocks appear to be length contracted and time dilated to moving observers due to their misunderstanding of their own state of motion with respect to the laboratory. Observers restricted to using sound clocks describe a universe kinematically consistent with the theory of special relativity, despite the preferred frame of their universe in the laboratory. Such devices show promise in further probing analogue relativity models, for example in investigating phenomena that require careful consideration of the proper time elapsed for observers.

Teaching epidemiology in the digital age: considerations for academicians and their students.

PubMed

Caron, Rosemary M

2013-09-01

The way in which we prepare future public health professionals is changing because of the digital age. Online education is expanding the accessibility of public health training to students and practitioners with diverse backgrounds. Online courses offer many advantages for students, including flexible schedules, elimination of commuting time, and fostering interactions among students and the instructor. A few disadvantages of online courses for the student can include a feeling of isolation, difficulty adjusting to the time-intensive nature, and the required self-discipline to regularly tend to online course materials that immature and working students can find challenging. For faculty who are faced with teaching epidemiology in these changing times of the traditional face-to-face classroom and the virtual classroom, the core teaching principles of this science of public health remain unchanged, yet how they are delivered in the online environment adds a layer of complexity not previously encountered. This paper presents practical considerations for faculty who will be teaching online and their students who will be learning online. In addition, a framework for an online epidemiology course is presented as a model by which faculty interested in teaching epidemiology online can modify the course structure, content, and assessment tools to fit their needs. Copyright © 2013 Elsevier Inc. All rights reserved.

16 CFR 1702.2 - Procedural requirements and recommendations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Procedural requirements and recommendations...; PETITION PROCEDURES AND REQUIREMENTS § 1702.2 Procedural requirements and recommendations. (a) Requirements... recommendations. The following are procedural recommendations to help the Commission in its consideration of...

16 CFR 1702.2 - Procedural requirements and recommendations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Procedural requirements and recommendations...; PETITION PROCEDURES AND REQUIREMENTS § 1702.2 Procedural requirements and recommendations. (a) Requirements... recommendations. The following are procedural recommendations to help the Commission in its consideration of...

Optical slotted circuit switched network: a bandwidth efficient alternative to wavelength-routed network

NASA Astrophysics Data System (ADS)

Li, Yan; Collier, Martin

2007-11-01

Wavelength-routed networks have received enormous attention due to the fact that they are relatively simple to implement and implicitly offer Quality of Service (QoS) guarantees. However, they suffer from a bandwidth inefficiency problem and require complex Routing and Wavelength Assignment (RWA). Most attempts to address the above issues exploit the joint use of WDM and TDM technologies. The resultant TDM-based wavelength-routed networks partition the wavelength bandwidth into fixed-length time slots organized as a fixed-length frame. Multiple connections can thus time-share a wavelength and the grooming of their traffic leads to better bandwidth utilization. The capability of switching in both wavelength and time domains in such networks also mitigates the RWA problem. However, TMD-based wavelength-routed networks work in synchronous mode and strict synchronization among all network nodes is required. Global synchronization for all-optical networks which operate at extremely high speed is technically challenging, and deploying an optical synchronizer for each wavelength involves considerable cost. An Optical Slotted Circuit Switching (OSCS) architecture is proposed in this paper. In an OSCS network, slotted circuits are created to better utilize the wavelength bandwidth than in classic wavelength-routed networks. The operation of the protocol is such as to avoid the need for global synchronization required by TDM-based wavelength-routed networks.

Parallel methodology to capture cyclic variability in motored engines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ameen, Muhsin M.; Yang, Xiaofeng; Kuo, Tang-Wei

2016-07-28

Numerical prediction of of cycle-to-cycle variability (CCV) in SI engines is extremely challenging for two key reasons: (i) high-fidelity methods such as large eddy simulation (LES) are require to accurately capture the in-cylinder turbulent flowfield, and (ii) CCV is experienced over long timescales and hence the simulations need to be performed for hundreds of consecutive cycles. In this study, a new methodology is proposed to dissociate this long time-scale problem into several shorter time-scale problems, which can considerably reduce the computational time without sacrificing the fidelity of the simulations. The strategy is to perform multiple single-cycle simulations in parallel bymore » effectively perturbing the simulation parameters such as the initial and boundary conditions. It is shown that by perturbing the initial velocity field effectively based on the intensity of the in-cylinder turbulence, the mean and variance of the in-cylinder flowfield is captured reasonably well. Adding perturbations in the initial pressure field and the boundary pressure improves the predictions. It is shown that this new approach is able to give accurate predictions of the flowfield statistics in less than one-tenth of time required for the conventional approach of simulating consecutive engine cycles.« less

The Role of Time-Limited Trials in Dialysis Decision Making in Critically Ill Patients.

PubMed

Scherer, Jennifer S; Holley, Jean L

2016-02-05

Technologic advances, such as continuous RRT, provide lifesaving therapy for many patients. AKI in the critically ill patient, a fatal diagnosis in the past, is now often a survivable condition. Dialysis decision making for the critically ill patient with AKI is complex. What was once a question solely of survival now is nuanced by an individual's definition of quality of life, personal values, and short- and long-term prognoses. Clinical evaluation of AKI in the critically ill is multifaceted. Treatment decision making requires consideration of the natural evolution of the patient's AKI within the context of the global prognosis. Situations are often marked by prognostic uncertainty and clinical unknowns. In the face of these uncertainties, establishment of patient-directed therapies is imperative. A time-limited trial of continuous RRT in this setting is often appropriate but difficult to execute. Using patient preferences as a clinical guide, a proper time-limited trial requires assessment of prognosis, elicitation of patient values, strong communication skills, clear documentation, and often, appropriate integration of palliative care services. A well conducted time-limited trial can avoid interprofessional conflict and provide support for the patient, family, and staff. Copyright © 2016 by the American Society of Nephrology.

Event-driven processing for hardware-efficient neural spike sorting

NASA Astrophysics Data System (ADS)

Liu, Yan; Pereira, João L.; Constandinou, Timothy G.

2018-02-01

Objective. The prospect of real-time and on-node spike sorting provides a genuine opportunity to push the envelope of large-scale integrated neural recording systems. In such systems the hardware resources, power requirements and data bandwidth increase linearly with channel count. Event-based (or data-driven) processing can provide here a new efficient means for hardware implementation that is completely activity dependant. In this work, we investigate using continuous-time level-crossing sampling for efficient data representation and subsequent spike processing. Approach. (1) We first compare signals (synthetic neural datasets) encoded with this technique against conventional sampling. (2) We then show how such a representation can be directly exploited by extracting simple time domain features from the bitstream to perform neural spike sorting. (3) The proposed method is implemented in a low power FPGA platform to demonstrate its hardware viability. Main results. It is observed that considerably lower data rates are achievable when using 7 bits or less to represent the signals, whilst maintaining the signal fidelity. Results obtained using both MATLAB and reconfigurable logic hardware (FPGA) indicate that feature extraction and spike sorting accuracies can be achieved with comparable or better accuracy than reference methods whilst also requiring relatively low hardware resources. Significance. By effectively exploiting continuous-time data representation, neural signal processing can be achieved in a completely event-driven manner, reducing both the required resources (memory, complexity) and computations (operations). This will see future large-scale neural systems integrating on-node processing in real-time hardware.

Characterizing the Effects of a Vertical Time Threshold for a Class of Well-Clear Definitions

NASA Technical Reports Server (NTRS)

Upchurch, Jason M.; Munoz, Cesar A.; Narkawicz, Anthony J.; Consiglio, Maria C.; Chamberlain James P.

2015-01-01

A fundamental requirement for the integration of unmanned aircraft into civil airspace is the capability of aircraft to remain well clear of each other and avoid collisions. This requirement has led to a broad recognition of the need for an unambiguous, formal definition of well clear. It is further recognized that any such definition must be interoperable with existing airborne collision avoidance systems (ACAS). A particular class of well-clear definitions uses logic checks of independent distance thresholds as well as independent time thresholds in the vertical and horizontal dimensions to determine if a well-clear violation is predicted to occur within a given time interval. Existing ACAS systems also use independent distance thresholds, however a common time threshold is used for the vertical and horizontal logic checks. The main contribution of this paper is the characterization of the effects of the decoupled vertical time threshold on a well-clear definition in terms of (1) time to well-clear violation, and (2) interoperability with existing ACAS. The paper provides governing equations for both metrics and includes simulation results to illustrate the relationships. In this paper, interoperability implies that the time of well-clear violation is strictly less than the time a resolution advisory is issued by ACAS. The encounter geometries under consideration in this paper are initially well clear and consist of constant-velocity trajectories resulting in near-mid-air collisions.

Satellite scheduling considering maximum observation coverage time and minimum orbital transfer fuel cost

NASA Astrophysics Data System (ADS)

Zhu, Kai-Jian; Li, Jun-Feng; Baoyin, He-Xi

2010-01-01

In case of an emergency like the Wenchuan earthquake, it is impossible to observe a given target on earth by immediately launching new satellites. There is an urgent need for efficient satellite scheduling within a limited time period, so we must find a way to reasonably utilize the existing satellites to rapidly image the affected area during a short time period. Generally, the main consideration in orbit design is satellite coverage with the subsatellite nadir point as a standard of reference. Two factors must be taken into consideration simultaneously in orbit design, i.e., the maximum observation coverage time and the minimum orbital transfer fuel cost. The local time of visiting the given observation sites must satisfy the solar radiation requirement. When calculating the operational orbit elements as optimal parameters to be evaluated, we obtain the minimum objective function by comparing the results derived from the primer vector theory with those derived from the Hohmann transfer because the operational orbit for observing the disaster area with impulse maneuvers is considered in this paper. The primer vector theory is utilized to optimize the transfer trajectory with three impulses and the Hohmann transfer is utilized for coplanar and small inclination of non-coplanar cases. Finally, we applied this method in a simulation of the rescue mission at Wenchuan city. The results of optimizing orbit design with a hybrid PSO and DE algorithm show that the primer vector and Hohmann transfer theory proved to be effective methods for multi-object orbit optimization.

Supercomputer requirements for selected disciplines important to aerospace

NASA Technical Reports Server (NTRS)

Peterson, Victor L.; Kim, John; Holst, Terry L.; Deiwert, George S.; Cooper, David M.; Watson, Andrew B.; Bailey, F. Ron

1989-01-01

Speed and memory requirements placed on supercomputers by five different disciplines important to aerospace are discussed and compared with the capabilities of various existing computers and those projected to be available before the end of this century. The disciplines chosen for consideration are turbulence physics, aerodynamics, aerothermodynamics, chemistry, and human vision modeling. Example results for problems illustrative of those currently being solved in each of the disciplines are presented and discussed. Limitations imposed on physical modeling and geometrical complexity by the need to obtain solutions in practical amounts of time are identified. Computational challenges for the future, for which either some or all of the current limitations are removed, are described. Meeting some of the challenges will require computer speeds in excess of exaflop/s (10 to the 18th flop/s) and memories in excess of petawords (10 to the 15th words).

Integrated Flight Performance Analysis of a Launch Abort System Concept

NASA Technical Reports Server (NTRS)

Tartabini, Paul V.

2007-01-01

This paper describes initial flight performance analyses conducted early in the Orion Project to support concept feasibility studies for the Crew Exploration Vehicle s Launch Abort System (LAS). Key performance requirements that significantly affect abort capability are presented. These requirements have implications on sizing the Abort Motor, tailoring its thrust profile to meet escape requirements for both launch pad and high drag/high dynamic pressure ascent aborts. Additional performance considerations are provided for the Attitude Control Motor, a key element of the Orion LAS design that eliminates the need for ballast and provides performance robustness over a passive control approach. Finally, performance of the LAS jettison function is discussed, along with implications on Jettison Motor sizing and the timing of the jettison event during a nominal mission. These studies provide an initial understanding of LAS performance that will continue to evolve as the Orion design is matured.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Behnke, M. R.; Bellei, T.A.; Bloethe, W.G.

This paper presents a summary of the most impor- tant considerations for wind power plant collection system un- derground and overhead cable designs. Various considerations, including conductor selection, soil thermal properties, installa- tion methods, splicing, concentric grounding, and NESC/NEC requirements are discussed.

Essentials of Pediatric Emergency Medicine Fellowship: Part 6: Program Administration.

PubMed

Kim, In K; Zuckerbraun, Noel; Kou, Maybelle; Vu, Tien; Levasseur, Kelly; Yen, Kenneth; Chapman, Jennifer; Doughty, Cara; McAneney, Constance; Zaveri, Pavan; Hsu, Deborah

2016-10-01

This article is the sixth in a 7-part series that aims to comprehensively describe the current state and future directions of pediatric emergency medicine (PEM) fellowship training from the essential requirements to considerations for successfully administering and managing a program to the careers that may be anticipated upon program completion. This article provides a broad overview of administering and supervising a PEM fellowship program. It explores 3 topics: the principles of program administration, committee management, and recommendations for minimum time allocated for PEM fellowship program directors to administer their programs.

Review of Penner's criteria for proficiency testing in cytopathology: implications for the redesign of the federally mandated proficiency testing in cytopathology.

PubMed

Nagy, George K; Newton, Louise E

2007-01-01

Thirty-three years ago Penner advocated six criteria for the performance of proficiency testing in cytopathology (PTC). Since that time, several further requirements have been added by other authors. The present article critically evaluates and modifies the original criteria and adds two more principles, validity and reliability, that we recognize as crucially important in the performance of PTC. The revised criteria should be taken into consideration in the planned technical redesign of the nationwide PTC.

Application of cone-beam CT in the office setting.

PubMed

Thomas, Steven L

2008-10-01

The decision to incorporate cone-beam CT (CBCT) into a dental practice is one that requires serious consideration and careful planning. In the early days of the technology, fewer sources of information existed and a community of users often shared ideas and prompted the advancement of the products. Office-based CBCT has advanced significantly since that time. It has often been described as the "gold standard" for imaging the oral and maxillofacial area and will become a part of the everyday life of most practices in the coming decades.

Parametric study of minimum converter loss in an energy-storage dc-to-dc converter

NASA Technical Reports Server (NTRS)

Wong, R. C.; Owen, H. A., Jr.; Wilson, T. G.

1982-01-01

Through a combination of analytical and numerical minimization procedures, a converter design that results in the minimum total converter loss (including core loss, winding loss, capacitor and energy-storage-reactor loss, and various losses in the semiconductor switches) is obtained. Because the initial phase involves analytical minimization, the computation time required by the subsequent phase of numerical minimization is considerably reduced in this combination approach. The effects of various loss parameters on the optimum values of the design variables are also examined.

A lecture on lecturing.

PubMed

Calnan, J

1976-11-01

There are major differences between a lecture and a paper for publication. Often the printed word is spoken at meetings, a kind of compulsive public reading which has robbed the lecturer of the chance of oratory and the audience of a little enjoyment. The simple fact is that although doctors read aloud badly (actors do this far better) most can learn to speak spontaneolsly and with animation; but this requires time and effort, both of which are donated in a miserly way. The successful lecturer is generous and considerate of his audience--a rare being at medical meetings.

Time Request for the Finalization of a BACT Determination for a New Emissions Source

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Shannon information, LMC complexity and Rényi entropies: a straightforward approach.

PubMed

López-Ruiz, Ricardo

2005-04-01

The LMC complexity, an indicator of complexity based on a probabilistic description, is revisited. A straightforward approach allows us to establish the time evolution of this indicator in a near-equilibrium situation and gives us a new insight for interpreting the LMC complexity for a general non equilibrium system. Its relationship with the Rényi entropies is also explained. One of the advantages of this indicator is that its calculation does not require a considerable computational effort in many cases of physical and biological interest.

Special Considerations in Neonatal Mechanical Ventilation.

PubMed

Dalgleish, Stacey; Kostecky, Linda; Charania, Irina

2016-12-01

Care of infants supported with mechanical ventilation is complex, time intensive, and requires constant vigilance by an expertly prepared health care team. Current evidence must guide nursing practice regarding ventilated neonates. This article highlights the importance of common language to establish a shared mental model and enhance clear communication among the interprofessional team. Knowledge regarding the underpinnings of an open lung strategy and the interplay between the pathophysiology and individual infant's response to a specific ventilator strategy is most likely to result in a positive clinical outcome. Copyright © 2016 Elsevier Inc. All rights reserved.

Simple geometric algorithms to aid in clearance management for robotic mechanisms

NASA Technical Reports Server (NTRS)

Copeland, E. L.; Ray, L. D.; Peticolas, J. D.

1981-01-01

Global geometric shapes such as lines, planes, circles, spheres, cylinders, and the associated computational algorithms which provide relatively inexpensive estimates of minimum spatial clearance for safe operations were selected. The Space Shuttle, remote manipulator system, and the Power Extension Package are used as an example. Robotic mechanisms operate in quarters limited by external structures and the problem of clearance is often of considerable interest. Safe clearance management is simple and suited to real time calculation, whereas contact prediction requires more precision, sophistication, and computational overhead.

Clarification of New Source Review Policy on Averaging Times For Production Limitations

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Aeroelastic characteristics of composite bearingless rotor blades

NASA Technical Reports Server (NTRS)

Bielawa, R. L.

1976-01-01

Owing to the inherent unique structural features of composite bearingless rotors, various assumptions upon which conventional rotor aeroelastic analyses are formulated, are violated. Three such features identified are highly nonlinear and time-varying structural twist, structural redundancy in bending and torsion, and for certain configurations a strongly coupled low frequency bending-torsion mode. An examination of these aeroelastic considerations and appropriate formulations required for accurate analyses of such rotor systems is presented. Also presented are test results from a dynamically scaled model rotor and complementary analytic results obtained with the appropriately reformulated aeroelastic analysis.

GPS Integrity Channel RTCA Working Group recommendations

NASA Astrophysics Data System (ADS)

Kalafus, Rudolph M.

Recommendations made by a working group established by the Radio Technical Commission for Aeronautics are presented for the design of a wide-area broadcast service to provide indications on the status of GPS satellites. The integrity channel requirements and operational goals are outlined. Six integrity channel system concepts are considered and system design and time-to-alarm considerations are examined. The recommended system includes the broadcast of a coarse range measurement for each satellite which will enable the on-board GPS receiver to determine whether or not the navigation accuracy is within prescribed limits.

Additional reductions in Medicare spending growth will likely require shifting costs to beneficiaries.

PubMed

Chernew, Michael E

2013-05-01

Policy makers have considerable interest in reducing Medicare spending growth. Clarity in the debate on reducing Medicare spending growth requires recognition of three important distinctions: the difference between public and total spending on health, the difference between the level of health spending and rate of health spending growth, and the difference between growth per beneficiary and growth in the number of beneficiaries in Medicare. The primary policy issue facing the US health care system is the rate of spending growth in public programs, and solving that problem will probably require reforms to the entire health care sector. The Affordable Care Act created a projected trajectory for Medicare spending per beneficiary that is lower than historical growth rates. Although opportunities for one-time savings exist, any long-term savings from Medicare, beyond those already forecast, will probably require a shift in spending from taxpayers to beneficiaries via higher beneficiary premium contributions (overall or via means testing), changes in eligibility, or greater cost sharing at the point of service.

Comparative analysis of data base management systems

NASA Technical Reports Server (NTRS)

Smith, R.

1983-01-01

A study to determine if the Remote File Inquiry (RFI) system would handle the future requirements of the user community is discussed. RFI is a locally written and locally maintained on-line query/update package. The current and future on-line requirements of the user community were studied. Additional consideration was given to the types of data structuring the users required. The survey indicated the features of greatest benefit were: sort, subtotals, totals, record selection, storage of queries, global updating and the ability to page break. The major deficiencies were: one level of hierarchy, excessive response time, software unreliability, difficult to add, delete and modify records, complicated error messages and the lack of ability to perform interfield comparisons. Missing features users required were: formatted screens, interfield comparions, interfield arithmetic, multiple file access, security and data integrity. The survey team recommended Kennedy Space Center move forward to state-of-the-art software, a Data Base Management System which is thoroughly tested and easy to implement and use.

Study of application of space telescope science operations software for SIRTF use

NASA Technical Reports Server (NTRS)

Dignam, F.; Stetson, E.; Allendoerfer, W.

1985-01-01

The design and development of the Space Telescope Science Operations Ground System (ST SOGS) was evaluated to compile a history of lessons learned that would benefit NASA's Space Infrared Telescope Facility (SIRTF). Forty-nine specific recommendations resulted and were categorized as follows: (1) requirements: a discussion of the content, timeliness and proper allocation of the system and segment requirements and the resulting impact on SOGS development; (2) science instruments: a consideration of the impact of the Science Instrument design and data streams on SOGS software; and (3) contract phasing: an analysis of the impact of beginning the various ST program segments at different times. Approximately half of the software design and source code might be useable for SIRTF. Transportability of this software requires, at minimum, a compatible DEC VAX-based architecture and VMS operating system, system support software similar to that developed for SOGS, and continued evolution of the SIRTF operations concept and requirements such that they remain compatible with ST SOGS operation.

Design and analysis of a keel latch for use on the Hubble Space Telescope

NASA Technical Reports Server (NTRS)

Calvert, John; Stinson, Melanie

1986-01-01

The mechanical design of the keel latch is discussed, as well as the stress analysis of the keel latch. Background information; mechanical design requirements; some of the initial design considerations; the design considerations that led to the selection of the final design; the mechanics of the final design; testing that has been and will be accomplished to verify that design requirements have been met; and future tests are discussed.

Small Explorer Data System MIL-STD-1773 fiber optic bus

NASA Technical Reports Server (NTRS)

Flanegan, Mark; Label, Ken

1992-01-01

The MIL-STD-1773 Fiber Optic Data Bus as implemented in the GSFC Small Explorer Data System (SEDS) for the Small Explorer Program is described. It provides an overview of the SEDS MIL-STD-1773 bus components system design considerations, reliability figures, acceptance and qualification testing requirements, radiation requirements and tests, error handling considerations, and component heritage. The first mission using the bus will be launched in June of 1992.

Management considerations to implementing pharmaceutical care.

PubMed

Wichman, K; Hales, B; O'Brodovich, M; Paton, T; Wielenga, J

1993-12-01

Progressing towards the goal of PC requires a fundamental change to pharmacy practice. Strong leadership and management skills will be needed to facilitate this change. Even with enthusiastic and capable staff, implementation of the PC model will require considerable effort. Changes to the department's mission statement and organizational structure will be required. From this beginning, an action plan for the department can be developed. This plan includes the training of individuals and/or recruiting the necessary personnel. An ongoing education program, as well as determining the value of your service, is required. With successful implementation the PC model will lead to the acceptance of the pharmacist's role as the person responsible for identifying, preventing, and resolving drug-related problems.

Cognitive costs of decision-making strategies: A resource demand decomposition analysis with a cognitive architecture.

PubMed

Fechner, Hanna B; Schooler, Lael J; Pachur, Thorsten

2018-01-01

Several theories of cognition distinguish between strategies that differ in the mental effort that their use requires. But how can the effort-or cognitive costs-associated with a strategy be conceptualized and measured? We propose an approach that decomposes the effort a strategy requires into the time costs associated with the demands for using specific cognitive resources. We refer to this approach as resource demand decomposition analysis (RDDA) and instantiate it in the cognitive architecture Adaptive Control of Thought-Rational (ACT-R). ACT-R provides the means to develop computer simulations of the strategies. These simulations take into account how strategies interact with quantitative implementations of cognitive resources and incorporate the possibility of parallel processing. Using this approach, we quantified, decomposed, and compared the time costs of two prominent strategies for decision making, take-the-best and tallying. Because take-the-best often ignores information and foregoes information integration, it has been considered simpler than strategies like tallying. However, in both ACT-R simulations and an empirical study we found that under increasing cognitive demands the response times (i.e., time costs) of take-the-best sometimes exceeded those of tallying. The RDDA suggested that this pattern is driven by greater requirements for working memory updates, memory retrievals, and the coordination of mental actions when using take-the-best compared to tallying. The results illustrate that assessing the relative simplicity of strategies requires consideration of the overall cognitive system in which the strategies are embedded. Copyright © 2017 Elsevier B.V. All rights reserved.

Enhancing the Quality of Service for Real Time Traffic over Optical Burst Switching (OBS) Networks with Ensuring the Fairness for Other Traffics

PubMed Central

Al-Shargabi, Mohammed A.; Ismail, Abdulsamad S.

2016-01-01

Optical burst switching (OBS) networks have been attracting much consideration as a promising approach to build the next generation optical Internet. A solution for enhancing the Quality of Service (QoS) for high priority real time traffic over OBS with the fairness among the traffic types is absent in current OBS’ QoS schemes. In this paper we present a novel Real Time Quality of Service with Fairness Ratio (RT-QoSFR) scheme that can adapt the burst assembly parameters according to the traffic QoS needs in order to enhance the real time traffic QoS requirements and to ensure the fairness for other traffic. The results show that RT-QoSFR scheme is able to fulfill the real time traffic requirements (end to end delay, and loss rate) ensuring the fairness for other traffics under various conditions such as the type of real time traffic and traffic load. RT-QoSFR can guarantee that the delay of the real time traffic packets does not exceed the maximum packets transfer delay value. Furthermore, it can reduce the real time traffic packets loss, at the same time guarantee the fairness for non real time traffic packets by determining the ratio of real time traffic inside the burst to be 50–60%, 30–40%, and 10–20% for high, normal, and low traffic loads respectively. PMID:27583557

An active target for the accelerator-based transmutation system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grebyonkin, K.F.

1995-10-01

Consideration is given to the possibility of radical reduction in power requirements to the proton accelerator of the electronuclear reactor due to neutron multiplication both in the blanket and the target of an active material. The target is supposed to have the fast-neutron spectrum, and the blanket-the thermal one. The blanket and the target are separated by the thermal neutrons absorber, which is responsible for the neutron decoupling of the active target and blanket. Also made are preliminary estimations which illustrate that the realization of the idea under consideration can lead to significant reduction in power requirements to the protonmore » beam and, hence considerably improve economic characteristics of the electronuclear reactor.« less

Radiological anatomy - evaluation of integrative education in radiology.

PubMed

Dettmer, S; Schmiedl, A; Meyer, S; Giesemann, A; Pabst, R; Weidemann, J; Wacker, F K; Kirchhoff, T

2013-09-01

Evaluation and analysis of the integrative course "Radiological Anatomy" established since 2007 at the Medical School Hannover (MHH) in comparison with conventional education. Anatomy and radiology are usually taught separately with a considerable time lag. Interdisciplinary teaching of these associated subjects seems logical for several reasons. Therefore, the integrative course "Radiological Anatomy" was established in the second year of medical education, combining these two closely related subjects. This interdisciplinary course was retrospectively evaluated by consideration of a student questionnaire and staff observations. The advantages and disadvantages of integrative teaching in medical education are discussed. The course ratings were excellent (median 1; mean 1.3 on a scale of 1 to 6). This is significantly (p < 0.001) better than the average of all evaluated courses in the respective term (grade 2.8). The course improved the anatomical comprehension (90 %) and the students stated that the topics were relevant for their future medical education (90 %). Furthermore, interest in the subject's anatomy and radiology increased during the course (88 %). According to the students' suggestions the course was enhanced by a visitation in the Department of Radiology and the additional topic central nervous system. Integrative teaching of anatomy and radiology was well received by the students. Both, anatomical and radiological comprehension and the motivation to learn were improved. However, it should be considered, that the amount of work and time required by the teaching staff is considerably increased compared to traditional teaching. © Georg Thieme Verlag KG Stuttgart · New York.

Administrative gatekeeping - a third way between unrestricted patient advocacy and bedside rationing.

PubMed

Lauridsen, Sigurd

2009-06-01

The inevitable need for rationing of healthcare has apparently presented the medical profession with the dilemma of choosing the lesser of two evils. Physicians appear to be obliged to adopt either an implausible version of traditional professional ethics or an equally problematic ethics of bedside rationing. The former requires unrestricted advocacy of patients but prompts distrust, moral hazard and unfairness. The latter commits physicians to rationing at the bedside; but it is bound to introduce unfair inequalities among patients and lack of political accountability towards citizens. In this paper I shall argue that this dilemma is false, since a third intermediate alternative exists. This alternative, which I term 'administrative gatekeeping', makes it possible for physicians to be involved in rationing while at the same time being genuine advocates of their patients. According to this ideal, physicians are required to follow fair rules of rationing adopted at higher organizational levels within healthcare systems. At the same time, however, they are prohibited from including considerations of cost in their clinical decisions.

RTEMS CENTRE- RTEMS Improvement

NASA Astrophysics Data System (ADS)

Silva, Helder; Constantino, Alexandre; Freitas, Daniel; Coutinho, Manuel; Faustino, Sergio; Sousa, Jose; Dias, Luis; Zulianello, Marco

2010-08-01

During the last two years, EDISOFT's RTEMS CENTRE team [1], jointly with the European Space Agency and with the support of the worldwide RTEMS community [2], have been developing an activity to facilitate the qualification of the real-time operating system RTEMS (Real-Time Operating System for Multiprocessor Systems). This paper intends to give a high level visibility of the progress and the results obtained in the RTEMS Improvement [3] activity. The primary objective [4] of the project is to improve the RTEMS product, its documentation and to facilitate the qualification of RTEMS for future space missions, taking into consideration the specific operational requirements. The sections below provide a brief overview of the RTEMS operating system and the activities performed in the RTEMS Improvement project, which includes the selection of API managers to be qualified, the tailoring process, the requirements analysis, the reverse engineering and design of the RTEMS, the quality assurance process, the ISVV activities, the test campaign, the results obtained, the criticality analysis and the facilitation of qualification process.

Instrumentation used for hydraulic testing of potential water-bearing formations at the Waste Isolation Pilot Plant site in southeastern New Mexico

USGS Publications Warehouse

Basler, J.A.

1983-01-01

Requirements for testing hydrologic test wells at the proposed Waste Isolation Pilot Plant near Carlsbad, New Mexico, necessitated the use of inflatable formation packers and pressure transducers. Observations during drilling and initial development indicated small formation yields which would require considerable test times by conventional open-casing methods. A pressure-monitoring system was assembled for performance evaluation utilizing commercially available components. Formation pressures were monitored with a down-hole strain-gage transducer. An inflatable packer equipped with a 1/4-inch-diameter steel tube extending through the inflation element permitted sensing formation pressures in isolated test zones. Surface components of the monitoring system provided AC transducer excitation, signal conditioning for recording directly in engineering units, and both analog and digital recording. Continuous surface monitoring of formation pressures provided a means of determining test status and projecting completion times during any phase of testing. Maximum portability was afforded by battery operation with all surface components mounted in a small self-contained trailer. (USGS)

Energy saving through LED in signaling functions for automotive exterior lighting

NASA Astrophysics Data System (ADS)

Bony, Alexis; Hamami, Khaled; Tebbe, Frank; Mertens, Jens

2011-05-01

Safety considerations have always driven the way for improving exterior automotive lighting legal requirements. With the recent adoption of day-time running lamps for passenger cars, the steadily increasing need for reduction of vehicle power consumption has led to the introduction of LED-based day-time running lamps. Solutions with incandescent bulbs have also been implemented, as they present price advantages while offering limited design perspectives. In the meantime, technology developments has turned LED sources into ideal candidates for daytime running lamps by increasing their lumen per watt efficiency ratio towards values around 100 lm/W or higher. In this work, taking as an example the new Mercedes-Benz roadster SLK (R172), we present the first single LED daytime- running lamp, with a total power consumption below 5W per vehicle. After reviewing legal requirements, the optical and electronic concepts are discussed. Details on the tail lamp LED functions are also discussed, and particularly the advantages from the realization of fog lamp with LEDs.

Assessing usefulness and researcher satisfaction with consent form templates.

PubMed

Larson, Elaine L; Teller, Alan; Aguirre, Alejandra N; Jackson, Jhia; Meyer, Dodi

2017-08-01

We aimed to improve the research consenting process by developing and evaluating simplified consent forms. Four templates written at the eighth-tenth grade reading level were developed and trialed by a group of experts in clinical research, health literacy, national regulatory requirements, and end users. Researchers from protocols which had received expedited review were surveyed at 2 time points regarding their use and assessment of the templates. At baseline 18/86 (20.9%) responding researchers had heard of the templates and 5 (5.8%) reported that they had used them; 2 years later, 54.2% (32/59) had heard of the templates and 87.5% (28/32) had used them ( p <0.001). Consent form templates may be one mechanism to improve patient comprehension of research protocols as well as efficiency of the review process, but require considerable time for development and implementation, and one key to their success is involvement and support from the IRB and technical staff.

Design of a freezer system for Columbus

NASA Astrophysics Data System (ADS)

Vidal, P.; Ravex, A.; Villard, J. C.

1991-12-01

Refrigeration facilities are required to support life sciences experiments on the Columbus Space Station laboratories. Current freezers, achieving temperatures of about -20 C, are adequate for short mission times. Significantly lower temperatures, of the order of -80 C are required to avoid deterioration of specimens during the long mission times associated with Columbus utilization. A study which reviewed and traded available technologies to clearly identify and justify the choice of a freezer system providing cold storage at -20 and -80 C is presented. The design of the freezer system is then established and described. The technical solution is based on Dewar casing technology and Brayton cycle refrigeration. The Dewar technology ensures very low heat loads to the refrigeration machine and, therefore, a low overall power consumption. The Brayton cycle was chosen above all for its intrinsic microgravity compatibility. It also presents the high advantage of using nitrogen as heat carrier and of having low pressure ratios, which is a considerable safety bonus in a manned closed environment.

Contingency Planning for Planetary Rovers

NASA Technical Reports Server (NTRS)

Dearden, Richard; Meuleau, Nicolas; Ramakrishnan, Sailesh; Smith, David; Washington, Rich; Clancy, Daniel (Technical Monitor)

2002-01-01

There has been considerable work in AI on planning under uncertainty. But this work generally assumes an extremely simple model of action that does not consider continuous time and resources. These assumptions are not reasonable for a Mars rover, which must cope with uncertainty about the duration of tasks, the power required, the data storage necessary, along with its position and orientation. In this paper, we outline an approach to generating contingency plans when the sources of uncertainty involve continuous quantities such as time and resources. The approach involves first constructing a "seed" plan, and then incrementally adding contingent branches to this plan in order to improve utility. The challenge is to figure out the best places to insert contingency branches. This requires an estimate of how much utility could be gained by building a contingent branch at any given place in the seed plan. Computing this utility exactly is intractable, but we outline an approximation method that back propagates utility distributions through a graph structure similar to that of a plan graph.

Incremental Contingency Planning

NASA Technical Reports Server (NTRS)

Dearden, Richard; Meuleau, Nicolas; Ramakrishnan, Sailesh; Smith, David E.; Washington, Rich

2003-01-01

There has been considerable work in AI on planning under uncertainty. However, this work generally assumes an extremely simple model of action that does not consider continuous time and resources. These assumptions are not reasonable for a Mars rover, which must cope with uncertainty about the duration of tasks, the energy required, the data storage necessary, and its current position and orientation. In this paper, we outline an approach to generating contingency plans when the sources of uncertainty involve continuous quantities such as time and resources. The approach involves first constructing a "seed" plan, and then incrementally adding contingent branches to this plan in order to improve utility. The challenge is to figure out the best places to insert contingency branches. This requires an estimate of how much utility could be gained by building a contingent branch at any given place in the seed plan. Computing this utility exactly is intractable, but we outline an approximation method that back propagates utility distributions through a graph structure similar to that of a plan graph.

An automatic multi-atlas prostate segmentation in MRI using a multiscale representation and a label fusion strategy

NASA Astrophysics Data System (ADS)

Álvarez, Charlens; Martínez, Fabio; Romero, Eduardo

2015-01-01

The pelvic magnetic Resonance images (MRI) are used in Prostate cancer radiotherapy (RT), a process which is part of the radiation planning. Modern protocols require a manual delineation, a tedious and variable activity that may take about 20 minutes per patient, even for trained experts. That considerable time is an important work ow burden in most radiological services. Automatic or semi-automatic methods might improve the efficiency by decreasing the measure times while conserving the required accuracy. This work presents a fully automatic atlas- based segmentation strategy that selects the more similar templates for a new MRI using a robust multi-scale SURF analysis. Then a new segmentation is achieved by a linear combination of the selected templates, which are previously non-rigidly registered towards the new image. The proposed method shows reliable segmentations, obtaining an average DICE Coefficient of 79%, when comparing with the expert manual segmentation, under a leave-one-out scheme with the training database.

26 CFR 1.6038A-2 - Requirement of return.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., formulas, inventions, models, patents, processes, trademarks, and other similar intangible property rights; (v) Consideration paid and received for technical, managerial, engineering, construction, scientific... of all property (including monetary consideration), rights, or obligations transferred from the...

Human respiratory considerations for civil transport aircraft oxygen system.

DOT National Transportation Integrated Search

1978-01-01

This report is intended to acquaint personnel involved in the design, inspection, and maintenance of civil transport oxygen systems with the human respiratory requirements and oxygen system design considerations necessary to effect an interface and p...

Perioperative Considerations in Metastatic Renal Cell Carcinoma

PubMed Central

Flavin, Kate; Vasdev, Nikhil; Ashead, Jim; Lane, Tim; Hanbury, Damian; Nathan, Paul; Gowrie-Mohan, Shanmugasundaram

2016-01-01

Patients with metastatic renal cell carcinoma are complex, with the potential for significant complications, and require extensive pre-, peri-, and postoperative management. This article discusses, in depth, the necessary considerations in the treatment of these patients. PMID:27833463

Solar power satellite life-cycle energy recovery consideration

NASA Astrophysics Data System (ADS)

Weingartner, S.; Blumenberg, J.

The construction, in-orbit installation and maintenance of a solar power satellite (SPS) will demand large amounts of energy. As a minimum requirement for an energy effective power satellite it is asked that this amount of energy be recovered. The energy effectiveness in this sense resulting in a positive net energy balance is a prerequisite for cost-effective power satellite. This paper concentrates on life-cycle energy recovery instead on monetary aspects. The trade-offs between various power generation systems (different types of solar cells, solar dynamic), various construction and installation strategies (using terrestrial or extra-terrestrial resources) and the expected/required lifetime of the SPS are reviewed. The presented work is based on a 2-year study performed at the Technical University of Munich. The study showed that the main energy which is needed to make a solar power satellite a reality is required for the production of the solar power components (up to 65%), especially for the solar cell production. Whereas transport into orbit accounts in the order of 20% and the receiving station on earth (rectenna) requires about 15% of the total energy investment. The energetic amortization time, i.e. the time the SPS has to be operational to give back the amount of energy which was needed for its production installation and operation, is about two years.

Feasibility of using a reliable automated Doppler flow velocity measurements for research and clinical practices

NASA Astrophysics Data System (ADS)

Zolgharni, Massoud; Dhutia, Niti M.; Cole, Graham D.; Willson, Keith; Francis, Darrel P.

2014-03-01

Echocardiographers are often unkeen to make the considerable time investment to make additional multiple measurements of Doppler velocity. Main hurdle to obtaining multiple measurements is the time required to manually trace a series of Doppler traces. To make it easier to analyse more beats, we present an automated system for Doppler envelope quantification. It analyses long Doppler strips, spanning many heartbeats, and does not require the electrocardiogram to isolate individual beats. We tested its measurement of velocity-time-integral and peak-velocity against the reference standard defined as the average of three experts who each made three separate measurements. The automated measurements of velocity-time-integral showed strong correspondence (R2 = 0.94) and good Bland-Altman agreement (SD = 6.92%) with the reference consensus expert values, and indeed performed as well as the individual experts (R2 = 0.90 to 0.96, SD = 5.66% to 7.64%). The same performance was observed for peak-velocities; (R2 = 0.98, SD = 2.95%) and (R2 = 0.93 to 0.98, SD = 2.94% to 5.12%). This automated technology allows <10 times as many beats to be acquired and analysed compared to the conventional manual approach, with each beat maintaining its accuracy.

Extra Solar Planetary Imaging Coronagraph and Science Requirements for the James Webb Telescope Observatory

NASA Technical Reports Server (NTRS)

Clampin, Mark

2004-01-01

1) Extra solar planetary imaging coronagraph. Direct detection and characterization of Jovian planets, and other gas giants, in orbit around nearby stars is a necessary precursor to Terrestrial Planet Finder 0 in order to estimate the probability of Terrestrial planets in our stellar neighborhood. Ground based indirect methods are biased towards large close in Jovian planets in solar systems unlikely io harbor Earthlike planets. Thus to estimate the relative abundances of terrestrial planets and to determine optimal observing strategies for TPF a pathfinder mission would be desired. The Extra-Solar Planetary Imaging Coronagraph (EPIC) is such a pathfinder mission. Upto 83 stellar systems are accessible with a 1.5 meter unobscured telescope and coronagraph combination located at the Earth-Sun L2 point. Incorporating radiometric and angular resolution considerations show that Jovians could be directly detected (5 sigma) in the 0.5 - 1.0 micron band outside of an inner working distance of 5/D with integration times of -10 - 100 hours per observation. The primary considerations for a planet imager are optical wavefront quality due to manufacturing, alignment, structural and thermal considerations. pointing stability and control, and manufacturability of coronagraphic masks and stops to increase the planetary-to- stellar contrast and mitigate against straylight. Previously proposed coronagraphic concepts are driven to extreme tolerances. however. we have developed and studied a mission, telescope and coronagraphic detection concept, which is achievable in the time frame of a Discovery class NASA mission. 2) Science requirements for the James Webb Space Telescope observatory. The James Webb Space Observatory (JWST) is an infrared observatory, which will be launched in 201 1 to an orbit at L2. JWST is a segmented, 18 mirror segment telescope with a diameter of 6.5 meters, and a clear aperture of 25 mA2. The telescope is designed to conduct imaging and spectroscopic observations from 0.6-27 microns. The primary mirror find and understand predicted first light objects, observe galaxies back to their earliest precursors so that we can understand their growth and evolution, unravel the birth and early evolution of stars and planetary systems, and study planetary systems and the origins of life. In this paper we discuss the science goals for JWST in the context of the performance requirements they levy on the observatory.

Variability in the skin exposure of machine operators exposed to cutting fluids.

PubMed

Wassenius, O; Järvholm, B; Engström, T; Lillienberg, L; Meding, B

1998-04-01

This study describes a new technique for measuring skin exposure to cutting fluids and evaluates the variability of skin exposure among machine operators performing cyclic (repetitive) work. The technique is based on video recording and subsequent analysis of the video tape by means of computer-synchronized video equipment. The time intervals at which the machine operator's hand was exposed to fluid were registered, and the total wet time of the skin was calculated by assuming different evaporation times for the fluid. The exposure of 12 operators with different work methods was analyzed in 6 different workshops, which included a range of machine types, from highly automated metal cutting machines (ie, actual cutting and chip removal machines) requiring operator supervision to conventional metal cutting machines, where the operator was required to maneuver the machine and manually exchange products. The relative wet time varied between 0% and 100%. A significant association between short cycle time and high relative wet time was noted. However, there was no relationship between the degree of automatization of the metal cutting machines and wet time. The study shows that skin exposure to cutting fluids can vary considerably between machine operators involved in manufacturing processes using different types of metal cutting machines. The machine type was not associated with dermal wetness. The technique appears to give objective information about dermal wetness.

Exponential propagators for the Schrödinger equation with a time-dependent potential.

PubMed

Bader, Philipp; Blanes, Sergio; Kopylov, Nikita

2018-06-28

We consider the numerical integration of the Schrödinger equation with a time-dependent Hamiltonian given as the sum of the kinetic energy and a time-dependent potential. Commutator-free (CF) propagators are exponential propagators that have shown to be highly efficient for general time-dependent Hamiltonians. We propose new CF propagators that are tailored for Hamiltonians of the said structure, showing a considerably improved performance. We obtain new fourth- and sixth-order CF propagators as well as a novel sixth-order propagator that incorporates a double commutator that only depends on coordinates, so this term can be considered as cost-free. The algorithms require the computation of the action of exponentials on a vector similar to the well-known exponential midpoint propagator, and this is carried out using the Lanczos method. We illustrate the performance of the new methods on several numerical examples.

Measurements of the time constant for steady ionization in shaped-charge barium releases

NASA Technical Reports Server (NTRS)

Hoch, Edward L.; Hallinan, Thomas J.

1993-01-01

Quantitative measurements of three solar illuminated shaped-charge barium releases injected at small angles to the magnetic field were made using a calibrated color television camera. Two of the releases were from 1989. The third release, a reanalysis of an event included in Hallinan's 1988 study of three 1986 releases, was included to provide continuity between the two studies. Time constants for ionization, measured during the first 25 s of each release, were found to vary considerably. The two 1989 time constants differed substantially, and both were significantly less than any of the 1986 time constants. On the basis of this variability, we conclude that the two 1989 releases showed evidence of continuous nonsolar ionization. One release showed nonsolar ionization which could not he attributed to Alfven's critical ionization velocity process, which requires a component of velocity perpendicular to the magnetic field providing a perpendicular energy greater than the ionization potential.

Singular perturbations and time scales in the design of digital flight control systems

NASA Technical Reports Server (NTRS)

Naidu, Desineni S.; Price, Douglas B.

1988-01-01

The results are presented of application of the methodology of Singular Perturbations and Time Scales (SPATS) to the control of digital flight systems. A block diagonalization method is described to decouple a full order, two time (slow and fast) scale, discrete control system into reduced order slow and fast subsystems. Basic properties and numerical aspects of the method are discussed. A composite, closed-loop, suboptimal control system is constructed as the sum of the slow and fast optimal feedback controls. The application of this technique to an aircraft model shows close agreement between the exact solutions and the decoupled (or composite) solutions. The main advantage of the method is the considerable reduction in the overall computational requirements for the evaluation of optimal guidance and control laws. The significance of the results is that it can be used for real time, onboard simulation. A brief survey is also presented of digital flight systems.

Statistical fluctuations in cooperative cyclotron radiation

NASA Astrophysics Data System (ADS)

Anishchenko, S. V.; Baryshevsky, V. G.

2018-01-01

Shot noise is the cause of statistical fluctuations in cooperative cyclotron radiation generated by an ensemble of electrons oscillating in magnetic field. Autophasing time - the time required for the cooperative cyclotron radiation power to peak - is the critical parameter characterizing the dynamics of electron-oscillators interacting via the radiation field. It is shown that premodulation of charged particles leads to a considerable narrowing of the autophasing time distribution function for which the analytic expression is obtained. When the number of particles Ne exceeds a certain value that depends on the degree to which the particles have been premodulated, the relative root-mean-square deviation (RMSD) of the autophasing time δT changes from a logarithmic dependence on Ne (δT ∼ 1 / lnNe) to square-root (δT ∼ 1 /√{Ne }). A slight energy spread (∼4%) results in a twofold drop of the maximum attainable power of cooperative cyclotron radiation.

Anticipating cognitive effort: roles of perceived error-likelihood and time demands.

PubMed

Dunn, Timothy L; Inzlicht, Michael; Risko, Evan F

2017-11-13

Why are some actions evaluated as effortful? In the present set of experiments we address this question by examining individuals' perception of effort when faced with a trade-off between two putative cognitive costs: how much time a task takes vs. how error-prone it is. Specifically, we were interested in whether individuals anticipate engaging in a small amount of hard work (i.e., low time requirement, but high error-likelihood) vs. a large amount of easy work (i.e., high time requirement, but low error-likelihood) as being more effortful. In between-subject designs, Experiments 1 through 3 demonstrated that individuals anticipate options that are high in perceived error-likelihood (yet less time consuming) as more effortful than options that are perceived to be more time consuming (yet low in error-likelihood). Further, when asked to evaluate which of the two tasks was (a) more effortful, (b) more error-prone, and (c) more time consuming, effort-based and error-based choices closely tracked one another, but this was not the case for time-based choices. Utilizing a within-subject design, Experiment 4 demonstrated overall similar pattern of judgments as Experiments 1 through 3. However, both judgments of error-likelihood and time demand similarly predicted effort judgments. Results are discussed within the context of extant accounts of cognitive control, with considerations of how error-likelihood and time demands may independently and conjunctively factor into judgments of cognitive effort.

20 CFR 220.132 - Physical exertion requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Physical exertion requirements. 220.132... ACT DETERMINING DISABILITY Vocational Considerations § 220.132 Physical exertion requirements. To determine the physical exertion requirements of work in the national economy, jobs are classified as...