76 FR 68493 - Extension of the Designation of Nicaragua for Temporary Protected Status and Automatic Extension...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-04

... long-term recovery has been the recurrence of these environmental disasters and ensuing damage in the.... SUPPLEMENTARY INFORMATION: Abbreviations and Terms Used in This Document Act--Immigration and Nationality Act... United States and may obtain work authorization, so long as they continue to meet the requirements of TPS...

14 CFR 16.209 - Extension of time.

Code of Federal Regulations, 2010 CFR

2010-01-01

... document was due, the motion for an extension of time is deemed denied. (d) Effect on time limits. In a hearing required by section 519(b) of the Airport and Airways Improvement Act, as amended in 1987, 49 U.S.C. 47106(e) and 47111(d), the due date for the hearing officer's initial decision and for the final...

78 FR 23545 - Proposed Extension of Approval of Information Collection; Comment Request: Third Party Conformity...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-19

... evaluate whether third party conformity assessment bodies meet the requirements to test for compliance to... background documents or comments received, go to http://www.regulations.gov . FOR FURTHER INFORMATION CONTACT...: A. Background The Consumer Product Safety Improvement Act of 2008 (CPSIA) requires third party...

Software Reviews.

ERIC Educational Resources Information Center

Science Software Quarterly, 1984

1984-01-01

Provides extensive reviews of computer software, examining documentation, ease of use, performance, error handling, special features, and system requirements. Includes statistics, problem-solving (TK Solver), label printing, database management, experimental psychology, Encyclopedia Britannica biology, and DNA-sequencing programs. A program for…

78 FR 16795 - Medicare and Medicaid Programs; Requirements for Long-Term Care (LTC) Facilities; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-19

...). We noted that research has extensively documented the pervasiveness of vulnerable populations which.... For example, if the State law requires the administrator of a NF participating in its State Medicaid...) would not be applicable. For example, if a facility's air conditioning failed during a heat wave, the...

XML and its impact on content and structure in electronic health care documents.

PubMed Central

Sokolowski, R.; Dudeck, J.

1999-01-01

Worldwide information networks have the requirement that electronic documents must be easily accessible, portable, flexible and system-independent. With the development of XML (eXtensible Markup Language), the future of electronic documents, health care informatics and the Web itself are about to change. The intent of the recently formed ASTM E31.25 subcommittee, "XML DTDs for Health Care", is to develop standard electronic document representations of paper-based health care documents and forms. A goal of the subcommittee is to work together to enhance existing levels of interoperability among the various XML/SGML standardization efforts, products and systems in health care. The ASTM E31.25 subcommittee uses common practices and software standards to develop the implementation recommendations for XML documents in health care. The implementation recommendations are being developed to standardize the many different structures of documents. These recommendations are in the form of a set of standard DTDs, or document type definitions that match the electronic document requirements in the health care industry. This paper discusses recent efforts of the ASTM E31.25 subcommittee. PMID:10566338

[Valid liability law in surgery. Principles of legal requirements and clinical benchmarks exemplified by visceral surgery].

PubMed

Theuer, D; Dillschneider, J; Mieth, M; Büchler, M W

2012-01-01

The spectacular increase in liability processes in the field of surgery and in particular in visceral surgery, necessitates an objectification of the conflict between surgical medical professionals and medico-legal institutions, firms of solicitors and courts. Out of court settlements assisted by expert opinion commissions of the Medical Council can avoid many legal conflicts. For improvement of the legal standpoint of a defendant medical professional an unambiguous, extensive and detailed documentation of medical examination findings, the indications for the planned operative intervention, extensive and detailed documentation on disclosure and informed consent of the patient for the planned operative intervention, an extensive, detailed careful and responsibly guided report of the operation as well as a systematic, orderly well-planned postoperative complication management are necessary to counter the accusation of an organizational failure of medical professionals and the accused hospital. The mutual building of confidence between surgical medical professionals and legal institutions is safeguarded by a comprehensive documentation and an unambiguous description and formulation of the medical discharge report on termination of inpatient treatment.

An extension of incidental teaching procedures to reading instruction for autistic children.

PubMed Central

McGee, G G; Krantz, P J; McClannahan, L E

1986-01-01

In an extension of incidental teaching procedures to reading instruction, two autistic children acquired functional sight-word reading skills in the context of a play activity. Children gained access to preferred toys by selecting the label of the toy in tasks requiring increasingly complex visual discriminations. In addition to demonstrating rapid acquisition of 5-choice discriminations, they showed comprehension on probes requiring reading skills to locate toys stored in labeled boxes. Also examined was postteaching transfer across stimulus materials and response modalities. Implications are that extensions of incidental teaching to new response classes may produce the same benefits documented in communication training, in terms of producing generalization concurrent with skill acquisition in the course of child-preferred activities. PMID:3733586

76 FR 49805 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-11

... request for extension of the previously approved collection of information discussed below. Regulation S-T... submission of documents on the Electronic Data Gathering, Analysis and Retrieval (``EDGAR'') system... any information collection requirements. An agency may not conduct or sponsor, and a person is not...

Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 7: PEP logistics and training plan requirements

NASA Technical Reports Server (NTRS)

1979-01-01

Recommendations for logistics activities and logistics planning are presented based on the assumption that a system prime contractor will perform logistics functions to support all program hardware and will implement a logistics system to include the planning and provision of products and services to assure cost effective coverage of the following: maintainability; maintenance; spares and supply support; fuels; pressurants and fluids; operations and maintenance documentation training; preservation, packaging and packing; transportation and handling; storage; and logistics management information reporting. The training courses, manpower, materials, and training aids required will be identified and implemented in a training program.

29 CFR 102.149 - Filing of documents; service of documents; motions for extension of time.

Code of Federal Regulations, 2010 CFR

2010-07-01

... extension of time. 102.149 Section 102.149 Labor Regulations Relating to Labor NATIONAL LABOR RELATIONS BOARD RULES AND REGULATIONS, SERIES 8 Awards of Fees and Other Expenses § 102.149 Filing of documents; service of documents; motions for extension of time. (a) All motions and pleadings after the time the case...

78 FR 72120 - Tennessee Valley Authority Watts Bar Nuclear Plant Unit No. 2; Order Approving Extension of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-02

... under 10 CFR 2.315(c), must be filed in accordance with the NRC E-Filing rule (72 FR 49139, August 28, 2007). The E-Filing process requires participants to submit and serve all adjudicatory documents over... below. To comply with the procedural requirements of E-Filing, at least ten 10 days prior to the filing...

GALE: a generic open source extensible adaptation engine

NASA Astrophysics Data System (ADS)

De Bra, Paul; Knutov, Evgeny; Smits, David; Stash, Natalia; Ramos, Vinicius F. C.

2013-06-01

This paper motivates and describes GALE, the Generic Adaptation Language and Engine that came out of the GRAPPLE EU FP7 project. The main focus of the paper is the extensible nature of GALE. The purpose of this description is to illustrate how a single core adaptation engine can be used for different types of adaptation, applied to different types of information items and documents. We illustrate the adaptive functionality on some examples of hypermedia documents. In April 2012, David Smits defended the world's first adaptive PhD thesis on this topic. The thesis, available for download and direct adaptive access at http://gale.win.tue.nl/thesis, shows that a single source of information can serve different audiences and at the same time also allows more freedom of navigation than is possible in any paper or static hypermedia document. The same can be done for course texts, hyperfiction, encyclopedia, museum, or other cultural heritage websites, etc. We explain how to add functionality to GALE if desired, to adapt the system's behavior to whatever the application requires. This stresses our main objective: to provide a technological base for adaptive (hypermedia) system researchers on which they can build extensions for the specific research they have in mind.

32 CFR 989.20 - Final EIS.

Code of Federal Regulations, 2010 CFR

2010-07-01

... limited to factual corrections and responses to comments, the proponent and EPF may, with the prior..., the EPF must submit the Draft EIS and all of the above documents, with a new cover sheet indicating... more extensive modifications are required, the EPF must prepare a preliminary final EIS incorporating...

Noise Budget for the X-Ray Microcalorimeter Spectrometer (XMS) Core Array

NASA Technical Reports Server (NTRS)

Kilbourne, Caroline Anne

2010-01-01

The purpose of this document is to present and archive the noise budget for the XMS detector, in order, at this stage in mission planning, to learn the scale of the requirements placed on the other instrument subsystems. This document mainly concerns the core array, specifically the baseline version that emerged from the trade studies associated with the ESA Phase A study report. Qualitative extension to the Hydra approach to the outer array is included at the end.

User-defined Material Model for Thermo-mechanical Progressive Failure Analysis

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.

2008-01-01

Previously a user-defined material model for orthotropic bimodulus materials was developed for linear and nonlinear stress analysis of composite structures using either shell or solid finite elements within a nonlinear finite element analysis tool. Extensions of this user-defined material model to thermo-mechanical progressive failure analysis are described, and the required input data are documented. The extensions include providing for temperature-dependent material properties, archival of the elastic strains, and a thermal strain calculation for materials exhibiting a stress-free temperature.

40 CFR 72.94 - Units with repowering extension plans.

Code of Federal Regulations, 2014 CFR

2014-07-01

... plans. (a) Design and engineering and contract requirements. No later than January 1, 2000, the... and the permitting authority: (1) Satisfactory documentation of a preliminary design and engineering effort. (2) A binding letter agreement for the executed and binding contract (or for each in a series of...

40 CFR 72.94 - Units with repowering extension plans.

Code of Federal Regulations, 2010 CFR

2010-07-01

... plans. (a) Design and engineering and contract requirements. No later than January 1, 2000, the... and the permitting authority: (1) Satisfactory documentation of a preliminary design and engineering effort. (2) A binding letter agreement for the executed and binding contract (or for each in a series of...

40 CFR 72.94 - Units with repowering extension plans.

Code of Federal Regulations, 2011 CFR

2011-07-01

... plans. (a) Design and engineering and contract requirements. No later than January 1, 2000, the... and the permitting authority: (1) Satisfactory documentation of a preliminary design and engineering effort. (2) A binding letter agreement for the executed and binding contract (or for each in a series of...

40 CFR 72.94 - Units with repowering extension plans.

Code of Federal Regulations, 2012 CFR

2012-07-01

... plans. (a) Design and engineering and contract requirements. No later than January 1, 2000, the... and the permitting authority: (1) Satisfactory documentation of a preliminary design and engineering effort. (2) A binding letter agreement for the executed and binding contract (or for each in a series of...

40 CFR 72.94 - Units with repowering extension plans.

Code of Federal Regulations, 2013 CFR

2013-07-01

... plans. (a) Design and engineering and contract requirements. No later than January 1, 2000, the... and the permitting authority: (1) Satisfactory documentation of a preliminary design and engineering effort. (2) A binding letter agreement for the executed and binding contract (or for each in a series of...

25 CFR 542.15 - What are the minimum internal control standards for credit?

Code of Federal Regulations, 2014 CFR

2014-04-01

...) Documentation of authorization by a person designated by management to approve credit limits; and (v) Credit... approved by personnel designated by management. (4) Proper approval of credit extensions over ten percent... that require access and are so authorized by management; (ii) Outstanding credit instruments shall be...

25 CFR 542.15 - What are the minimum internal control standards for credit?

Code of Federal Regulations, 2013 CFR

2013-04-01

...) Documentation of authorization by a person designated by management to approve credit limits; and (v) Credit... approved by personnel designated by management. (4) Proper approval of credit extensions over ten percent... that require access and are so authorized by management; (ii) Outstanding credit instruments shall be...

25 CFR 542.15 - What are the minimum internal control standards for credit?

Code of Federal Regulations, 2012 CFR

2012-04-01

...) Documentation of authorization by a person designated by management to approve credit limits; and (v) Credit... approved by personnel designated by management. (4) Proper approval of credit extensions over ten percent... that require access and are so authorized by management; (ii) Outstanding credit instruments shall be...

25 CFR 542.15 - What are the minimum internal control standards for credit?

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Documentation of authorization by a person designated by management to approve credit limits; and (v) Credit... approved by personnel designated by management. (4) Proper approval of credit extensions over ten percent... that require access and are so authorized by management; (ii) Outstanding credit instruments shall be...

25 CFR 542.15 - What are the minimum internal control standards for credit?

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Documentation of authorization by a person designated by management to approve credit limits; and (v) Credit... approved by personnel designated by management. (4) Proper approval of credit extensions over ten percent... that require access and are so authorized by management; (ii) Outstanding credit instruments shall be...

Dos and Don'ts of Writing Presidential Contracts

ERIC Educational Resources Information Center

Fain, Paul

2006-01-01

In the not-so-distant past, an employment agreement between a university president and a governing board was often nothing more than a handshake. Today, formal contracts are requirements for presidents, with boards and presidents typically relying on lawyers to extensively document terms of employment, salary and benefits, and, perhaps most…

47 CFR 1.734 - Specifications as to pleadings, briefs, and other documents; subscription.

Code of Federal Regulations, 2011 CFR

2011-10-01

... GENERAL PRACTICE AND PROCEDURE Complaints, Applications, Tariffs, and Reports Involving Common Carriers... good faith argument for the extension, modification, or reversal of existing law; and that it is not.... Upon showing of good cause, the Commission may waive the requirements of this paragraph. [53 FR 11855...

76 FR 9695 - Proposed Christmas Tree Promotion, Research, and Information Order; Extension of Comment Period...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-22

... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service 7 CFR Part 1214 [Document No. AMS-FV-10... of Comment Period on Proposed Establishment of a Program AGENCY: Agricultural Marketing Service, USDA... for the new Christmas tree information collection requirements by the Office of Management and Budget...

30 CFR 14.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... MINING PRODUCTS REQUIREMENTS FOR THE APPROVAL OF FLAME-RESISTANT CONVEYOR BELTS General Provisions § 14.2... manufactures or controls the production of a conveyor belt and applies to MSHA for approval of conveyor belt... conveyor belt as approved. Extension of approval. A document issued by MSHA, which states that a change to...

Participatory Data Collection Technique for Capturing Beginning Farmer Program Outcomes

ERIC Educational Resources Information Center

Eschbach, Cheryl L.; Sirrine, J. R.; Lizotte, Erin; Rothwell, N. L.

2016-01-01

This article describes an innovative evaluation plan we employed to capture outcomes of a multiyear beginning farmer program and, specifically, highlights the facilitation technique we used to document short-term and intermediate goals of the program that matched U.S. Department of Agriculture grant requirements and Extension administration…

Requirements and design aspects of a data model for a data dictionary in paediatric oncology.

PubMed

Merzweiler, A; Knaup, P; Creutzig, U; Ehlerding, H; Haux, R; Mludek, V; Schilling, F H; Weber, R; Wiedemann, T

2000-01-01

German children suffering from cancer are mostly treated within the framework of multicentre clinical trials. An important task of conducting these trials is an extensive information and knowledge exchange, which has to be based on a standardised documentation. To support this effort, it is the aim of a nationwide project to define a standardised terminology that should be used by clinical trials for therapy documentation. In order to support terminology maintenance we are currently developing a data dictionary. In this paper we describe requirements and design aspects of the data model used for the data dictionary as first results of our research. We compare it with other terminology systems.

An exponentiation method for XML element retrieval.

PubMed

Wichaiwong, Tanakorn

2014-01-01

XML document is now widely used for modelling and storing structured documents. The structure is very rich and carries important information about contents and their relationships, for example, e-Commerce. XML data-centric collections require query terms allowing users to specify constraints on the document structure; mapping structure queries and assigning the weight are significant for the set of possibly relevant documents with respect to structural conditions. In this paper, we present an extension to the MEXIR search system that supports the combination of structural and content queries in the form of content-and-structure queries, which we call the Exponentiation function. It has been shown the structural information improve the effectiveness of the search system up to 52.60% over the baseline BM25 at MAP.

Medicare, Medicaid, and Children's Health Insurance Programs: Announcement of the Extension of Temporary Moratoria on Enrollment of Part B Non-Emergency Ground Ambulance Suppliers and Home Health Agencies in Designated Geographic Locations. Extension of temporary moratoria.

PubMed

2018-01-30

This document announces the extension of statewide temporary moratoria on the enrollment of new Medicare Part B non-emergency ground ambulance providers and suppliers and Medicare home health agencies, subunits, and branch locations in Florida, Illinois, Michigan, Texas, Pennsylvania, and New Jersey, as applicable, to prevent and combat fraud, waste, and abuse. This extension also applies to the enrollment of new non-emergency ground ambulance suppliers and home health agencies, subunits, and branch locations in Medicaid and the Children's Health Insurance Program in those states. For purposes of these moratoria, providers that were participating as network providers in one or more Medicaid managed care organizations prior to January 1, 2018 will not be considered "newly enrolling" when they are required to enroll with the State Medicaid agency pursuant to a new statutory requirement, and thus will not be subject to the moratoria.

Design requirements and development of an airborne descent path definition algorithm for time navigation

NASA Technical Reports Server (NTRS)

Izumi, K. H.; Thompson, J. L.; Groce, J. L.; Schwab, R. W.

1986-01-01

The design requirements for a 4D path definition algorithm are described. These requirements were developed for the NASA ATOPS as an extension of the Local Flow Management/Profile Descent algorithm. They specify the processing flow, functional and data architectures, and system input requirements, and recommended the addition of a broad path revision (reinitialization) function capability. The document also summarizes algorithm design enhancements and the implementation status of the algorithm on an in-house PDP-11/70 computer. Finally, the requirements for the pilot-computer interfaces, the lateral path processor, and guidance and steering function are described.

Automatic Extraction of JPF Options and Documentation

NASA Technical Reports Server (NTRS)

Luks, Wojciech; Tkachuk, Oksana; Buschnell, David

2011-01-01

Documenting existing Java PathFinder (JPF) projects or developing new extensions is a challenging task. JPF provides a platform for creating new extensions and relies on key-value properties for their configuration. Keeping track of all possible options and extension mechanisms in JPF can be difficult. This paper presents jpf-autodoc-options, a tool that automatically extracts JPF projects options and other documentation-related information, which can greatly help both JPF users and developers of JPF extensions.

An MBSE Approach to Space Suit Development

NASA Technical Reports Server (NTRS)

Cordova, Lauren; Kovich, Christine; Sargusingh, Miriam

2012-01-01

The EVA/Space Suit Development Office (ESSD) Systems Engineering and Integration (SE&I) team has utilized MBSE in multiple programs. After developing operational and architectural models, the MBSE framework was expanded to link the requirements space to the system models through functional analysis and interfaces definitions. By documenting all the connections within the technical baseline, ESSD experienced significant efficiency improvements in analysis and identification of change impacts. One of the biggest challenges presented to the MBSE structure was a program transition and restructuring effort, which was completed successfully in 4 months culminating in the approval of a new EVA Technical Baseline. During this time three requirements sets spanning multiple DRMs were streamlined into one NASA-owned Systems Requirement Document (SRD) that successfully identified requirements relevant to the current hardware development effort while remaining extensible to support future hardware developments. A capability-based hierarchy was established to provide a more flexible framework for future space suit development that can support multiple programs with minimal rework of basic EVA/Space Suit requirements. This MBSE approach was most recently applied for generation of an EMU Demonstrator technical baseline being developed for an ISS DTO. The relatively quick turnaround of operational concepts, architecture definition, and requirements for this new suit development has allowed us to test and evolve the MBSE process and framework in an extremely different setting while still offering extensibility and traceability throughout ESSD projects. The ESSD MBSE framework continues to be evolved in order to support integration of all products associated with the SE&I engine.

Onboard shuttle on-line software requirements system: Prototype

NASA Technical Reports Server (NTRS)

Kolkhorst, Barbara; Ogletree, Barry

1989-01-01

The prototype discussed here was developed as proof of a concept for a system which could support high volumes of requirements documents with integrated text and graphics; the solution proposed here could be extended to other projects whose goal is to place paper documents in an electronic system for viewing and printing purposes. The technical problems (such as conversion of documentation between word processors, management of a variety of graphics file formats, and difficulties involved in scanning integrated text and graphics) would be very similar for other systems of this type. Indeed, technological advances in areas such as scanning hardware and software and display terminals insure that some of the problems encountered here will be solved in the near-term (less than five years). Examples of these solvable problems include automated input of integrated text and graphics, errors in the recognition process, and the loss of image information which results from the digitization process. The solution developed for the Online Software Requirements System is modular and allows hardware and software components to be upgraded or replaced as industry solutions mature. The extensive commercial software content allows the NASA customer to apply resources to solving the problem and maintaining documents.

Regulatory constraints as seen from the pharmaceutical industry.

PubMed

Galligani, G; David-Andersen, I; Fossum, B

2005-01-01

In Chile, Canada, Europe, Japan, and the USA, which are the main geographical areas for fish farming of high value fish such as salmonids, sea bass, sea bream, yellowtail and catfish, vaccination has been established as an important method for the prevention of infectious diseases. To make new vaccines available to the fish farming industry, pharmaceutical companies must comply with the regulatory framework for licensing of fish vaccines, which in recent years has become more regulated. Considerable scientific and regulatory skills are thus required to develop, document and license vaccines in accordance with the requirements in the different geographical areas. International co-operation to harmonise requirements for the licensing documentation is ongoing. Even though there are obvious benefits to the pharmaceutical industry from the harmonisation process, it may sometimes impose unreasonable requirements. The regulatory framework for fish vaccines clearly has an impact on the time for bringing a new fish vaccine to the market. Several hurdles need to be passed to complete the regulatory process, i.e. obtain a licence. Fulfilment of the rather detailed and extensive requirements for documentation of the production and controls, as well as safety and efficacy of the vaccine, represent a challenge to the pharmaceutical industry, as do the different national and regional licensing procedures. This paper describes regulatory constraints related to the documentation, the licensing process, the site of production and the continuing international harmonisation work, with emphasis on inactivated conventional fish vaccines.

An Exponentiation Method for XML Element Retrieval

PubMed Central

2014-01-01

XML document is now widely used for modelling and storing structured documents. The structure is very rich and carries important information about contents and their relationships, for example, e-Commerce. XML data-centric collections require query terms allowing users to specify constraints on the document structure; mapping structure queries and assigning the weight are significant for the set of possibly relevant documents with respect to structural conditions. In this paper, we present an extension to the MEXIR search system that supports the combination of structural and content queries in the form of content-and-structure queries, which we call the Exponentiation function. It has been shown the structural information improve the effectiveness of the search system up to 52.60% over the baseline BM25 at MAP. PMID:24696643

Closure of hazardous and mixed radioactive waste management units at DOE facilities. [Contains glossary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This is document addresses the Federal regulations governing the closure of hazardous and mixed waste units subject to Resource Conservation and Recovery Act (RCRA) requirements. It provides a brief overview of the RCRA permitting program and the extensive RCRA facility design and operating standards. It provides detailed guidance on the procedural requirements for closure and post-closure care of hazardous and mixed waste management units, including guidance on the preparation of closure and post-closure plans that must be submitted with facility permit applications. This document also provides guidance on technical activities that must be conducted both during and after closure ofmore » each of the following hazardous waste management units regulated under RCRA.« less

Benefits and Challenges of Architecture Frameworks

DTIC Science & Technology

2011-06-01

systems and identify emerging and obsolete standards. • The NATO Capability View ( NCV ) serves the analysis and optimization of military ca- pabilities... NCVs show the dependencies between different capabilities and allow detecting gaps and overlaps of capabilities. NCVs deliver indirectly requirements...Email (possibly with vendor-specific extensions/modifications) • Proprietary, and possibly not well-documented, message formats • Web services

Bridging the Gap: Teachers Cooperating Together to Implement Cooperative Learning

ERIC Educational Resources Information Center

Jolliffe, Wendy

2015-01-01

Cooperative learning (CL), in spite of extensive research and documented benefits, is not widely used in England. A review of the literature shows that it requires a staged and sustained approach to implementation, which has led to a gap between its potential and actual use. The case study cited here provides one example of bridging that gap…

From Knowledge to Action: Tips for Encouraging and Measuring Program-Related Behavior Change

ERIC Educational Resources Information Center

Chazdon, Scott; Horntvedt, Jody; Templin, Elizabeth

2016-01-01

It is challenging to document the behavior changes that result from Extension programming. This article describes an evaluation method we call the "action items method." Unlike other approaches for measuring behavior change, this method requires program participants to define their own action plans as part of a program and then asks them…

7 CFR 1488.9a - Evidence of export for commodities delivered before export.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Stocks Under CCC Export Credit Sales Program (GSM-5) Documents Required for Financing § 1488.9a Evidence... certification to the Treasurer, CCC, within 60 days from the date of delivery or such extension of time as may be granted by the Treasurer or Assistant Treasurer, CCC, certifying that the commodities have been...

7 CFR 1488.9a - Evidence of export for commodities delivered before export.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Stocks Under CCC Export Credit Sales Program (GSM-5) Documents Required for Financing § 1488.9a Evidence... certification to the Treasurer, CCC, within 60 days from the date of delivery or such extension of time as may be granted by the Treasurer or Assistant Treasurer, CCC, certifying that the commodities have been...

Composite Overwrapped Pressure Vessels: Database Extension Task 3.0 and Impact Damage Effects Control Task 8.0

NASA Technical Reports Server (NTRS)

Beeson, Harold D.; Davis, Dennis D.; Ross, William L., Sr.; Tapphorn, Ralph M.

2002-01-01

This document represents efforts accomplished at the NASA Johnson Space Center White Sands Test Facility (WSTF) in support of the Enhanced Technology for Composite Overwrapped Pressure Vessels (COPV) Program, a joint research and technology effort among the U.S. Air Force, NASA, and the Aerospace Corporation. WSTF performed testing for several facets of the program. Testing that contributed to the Task 3.0 COPV database extension objective included baseline structural strength, failure mode and safe-life, impact damage tolerance, sustained load/impact effect, and materials compatibility. WSTF was also responsible for establishing impact protection and control requirements under Task 8.0 of the program. This included developing a methodology for establishing an impact control plan. Seven test reports detail the work done at WSTF. As such, this document contributes to the database of information regarding COPV behavior that will ensure performance benefits and safety are maintained throughout vessel service life.

Combining dictionary techniques with extensible markup language (XML)--requirements to a new approach towards flexible and standardized documentation.

PubMed Central

Altmann, U.; Tafazzoli, A. G.; Noelle, G.; Huybrechts, T.; Schweiger, R.; Wächter, W.; Dudeck, J. W.

1999-01-01

In oncology various international and national standards exist for the documentation of different aspects of a disease. Since elements of these standards are repeated in different contexts, a common data dictionary could support consistent representation in any context. For the construction of such a dictionary existing documents have to be worked up in a complex procedure, that considers aspects of hierarchical decomposition of documents and of domain control as well as aspects of user presentation and models of the underlying model of patient data. In contrast to other thesauri, text chunks like definitions or explanations are very important and have to be preserved, since oncologic documentation often means coding and classification on an aggregate level and the safe use of coding systems is an important precondition for comparability of data. This paper discusses the potentials of the use of XML in combination with a dictionary for the promotion and development of standard conformable applications for tumor documentation. PMID:10566311

Embedding the shapes of regions of interest into a Clinical Document Architecture document.

PubMed

Minh, Nguyen Hai; Yi, Byoung-Kee; Kim, Il Kon; Song, Joon Hyun; Binh, Pham Viet

2015-03-01

Sharing a medical image visually annotated by a region of interest with a remotely located specialist for consultation is a good practice. It may, however, require a special-purpose (and most likely expensive) system to send and view them, which is an unfeasible solution in developing countries such as Vietnam. In this study, we design and implement interoperable methods based on the HL7 Clinical Document Architecture and the eXtensible Markup Language Stylesheet Language for Transformation standards to seamlessly exchange and visually present the shapes of regions of interest using web browsers. We also propose a new integration architecture for a Clinical Document Architecture generator that enables embedding of regions of interest and simultaneous auto-generation of corresponding style sheets. Using the Clinical Document Architecture document and style sheet, a sender can transmit clinical documents and medical images together with coordinate values of regions of interest to recipients. Recipients can easily view the documents and display embedded regions of interest by rendering them in their web browser of choice. © The Author(s) 2014.

Chippewa Indians: A Native American Curriculum Unit for the Third Grade. NATAM XIII.

ERIC Educational Resources Information Center

Kocur, Darlene

The document reports on an extension course taken in the spring of 1970 by public school teachers in the Columbia Heights Public School System via the University of Minnesota. The course, on American Indian education, included the usual on-campus requirements, as well as several lectures by guest Indians. Additionally, each teacher who enrolled in…

The Use of Object-Oriented Analysis Methods in Surety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craft, Richard L.; Funkhouser, Donald R.; Wyss, Gregory D.

1999-05-01

Object-oriented analysis methods have been used in the computer science arena for a number of years to model the behavior of computer-based systems. This report documents how such methods can be applied to surety analysis. By embodying the causality and behavior of a system in a common object-oriented analysis model, surety analysts can make the assumptions that underlie their models explicit and thus better communicate with system designers. Furthermore, given minor extensions to traditional object-oriented analysis methods, it is possible to automatically derive a wide variety of traditional risk and reliability analysis methods from a single common object model. Automaticmore » model extraction helps ensure consistency among analyses and enables the surety analyst to examine a system from a wider variety of viewpoints in a shorter period of time. Thus it provides a deeper understanding of a system's behaviors and surety requirements. This report documents the underlying philosophy behind the common object model representation, the methods by which such common object models can be constructed, and the rules required to interrogate the common object model for derivation of traditional risk and reliability analysis models. The methodology is demonstrated in an extensive example problem.« less

Institutional Commitment to Sustainability: An Evaluation of Natural Resource Extension Programs in Universities in Alabama and Oregon

ERIC Educational Resources Information Center

Broussard, Shorna R.; Bliss, John C.

2007-01-01

Purpose: The purpose of this research is to determine institutional commitment to sustainability by examining Natural Resource Extension program inputs, activities, and participation. Design/methodology/approach: A document analysis of Natural Resource Extension planning and reporting documents was conducted to provide contextual and historical…

Fall 2012 Graduate Engineering Internship Summary

NASA Technical Reports Server (NTRS)

Ehrlich, Joshua

2013-01-01

In the fall of 2012, I participated in the National Aeronautics and Space Administration (NASA) Pathways Intern Employment Program at the Kennedy Space Center (KSC) in Florida. This was my second internship opportunity with NASA, a consecutive extension from a summer 2012 internship. During my four-month tenure, I gained valuable knowledge and extensive hands-on experience with payload design and testing as well as composite fabrication for repair design on future space vehicle structures. As a systems engineer, I supported the systems engineering and integration team with the testing of scientific payloads such as the Vegetable Production System (Veggie). Verification and validation (V&V) of the Veggie was carried out prior to qualification testing of the payload, which incorporated a lengthy process of confirming design requirements that were integrated through one or more validatjon methods: inspection, analysis, demonstration, and testing. Additionally, I provided assistance in verifying design requirements outlined in the V&V plan with the requirements outlined by the scientists in the Science Requirements Envelope Document (SRED). The purpose of the SRED was to define experiment requirements intended for the payload to meet and carry out.

75 FR 39633 - Extension of Deadline for Action on Section 126 Petition From New Jersey

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-12

... Procedures Act (APA) C. Effective Date Under the APA III. Statutory and Executive Order Reviews A. Executive... Procedures Act (APA) This document is a final agency action, but may not be subject to the notice-and-comment requirements of the APA, 5 U.S.C. 553(b). The EPA believes that, because of the limited time provided to make a...

75 FR 69889 - Extension of Deadline for Action on the Second Section 126 Petition From New Jersey

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-16

... Act (APA) C. Effective Date Under the APA III. Statutory and Executive Order Reviews A. Executive... Administrative Procedures Act (APA) This document is a final agency action, but may not be subject to the notice-and-comment requirements of the APA, 5 U.S.C. 553(b). The EPA believes that, because of the limited...

ARDS User Manual

NASA Technical Reports Server (NTRS)

Fleming, David P.

2001-01-01

Personal computers (PCs) are now used extensively for engineering analysis. their capability exceeds that of mainframe computers of only a few years ago. Programs originally written for mainframes have been ported to PCs to make their use easier. One of these programs is ARDS (Analysis of Rotor Dynamic Systems) which was developed at Arizona State University (ASU) by Nelson et al. to quickly and accurately analyze rotor steady state and transient response using the method of component mode synthesis. The original ARDS program was ported to the PC in 1995. Several extensions were made at ASU to increase the capability of mainframe ARDS. These extensions have also been incorporated into the PC version of ARDS. Each mainframe extension had its own user manual generally covering only that extension. Thus to exploit the full capability of ARDS required a large set of user manuals. Moreover, necessary changes and enhancements for PC ARDS were undocumented. The present document is intended to remedy those problems by combining all pertinent information needed for the use of PC ARDS into one volume.

Guidance and Control Software Project Data - Volume 2: Development Documents

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J. (Editor)

2008-01-01

The Guidance and Control Software (GCS) project was the last in a series of software reliability studies conducted at Langley Research Center between 1977 and 1994. The technical results of the GCS project were recorded after the experiment was completed. Some of the support documentation produced as part of the experiment, however, is serving an unexpected role far beyond its original project context. Some of the software used as part of the GCS project was developed to conform to the RTCA/DO-178B software standard, "Software Considerations in Airborne Systems and Equipment Certification," used in the civil aviation industry. That standard requires extensive documentation throughout the software development life cycle, including plans, software requirements, design and source code, verification cases and results, and configuration management and quality control data. The project documentation that includes this information is open for public scrutiny without the legal or safety implications associated with comparable data from an avionics manufacturer. This public availability has afforded an opportunity to use the GCS project documents for DO-178B training. This report provides a brief overview of the GCS project, describes the 4-volume set of documents and the role they are playing in training, and includes the development documents from the GCS project. Volume 2 contains three appendices: A. Guidance and Control Software Development Specification; B. Design Description for the Pluto Implementation of the Guidance and Control Software; and C. Source Code for the Pluto Implementation of the Guidance and Control Software

SNX -- Starlink Extensions to the NCAR Graphics Utilities

NASA Astrophysics Data System (ADS)

Rees, P. C. T.; Bly, M. J.; Wallace, P. T.

The NCAR graphics suite (SUN/88) consists of a set of subprograms which can be used to produce complete graphs in a variety of formats. The package has been in wide use for some years; the latest version employs the ISO standard GKS interfaces for its low-level plotting, giving it access to all Starlink graphics devices, present and future. The NCAR routines themselves are thoroughly documented, and just a few simple calls will produce graphs of excellent appearance. The package also provides a high level of flexibility, with dozens of different details of the plot independently controllable to give exactly the result required. However, beginners may be daunted by the mass of features offered, and unless they take the extreme step of reading the manual may give up before they realise what the package can do for them. This document describes minor extensions which provide more convenient access to certain features without sacrificing flexibility. The AUTOGRAPH part of the NCAR suite, used in conjunction with the Starlink NCAR extensions and the Starlink low level plotting package SGS (SUN/85), offers an alternative high level system to PGPLOT (SUN/15) for producing graphs of one variable plotted against another. All of the Starlink extensions provided within SNX enhance the power of the facilities provided by AUTOGRAPH and make it more accessible to the beginner.

DEVA: An extensible ontology-based annotation model for visual document collections

NASA Astrophysics Data System (ADS)

Jelmini, Carlo; Marchand-Maillet, Stephane

2003-01-01

The description of visual documents is a fundamental aspect of any efficient information management system, but the process of manually annotating large collections of documents is tedious and far from being perfect. The need for a generic and extensible annotation model therefore arises. In this paper, we present DEVA, an open, generic and expressive multimedia annotation framework. DEVA is an extension of the Dublin Core specification. The model can represent the semantic content of any visual document. It is described in the ontology language DAML+OIL and can easily be extended with external specialized ontologies, adapting the vocabulary to the given application domain. In parallel, we present the Magritte annotation tool, which is an early prototype that validates the DEVA features. Magritte allows to manually annotating image collections. It is designed with a modular and extensible architecture, which enables the user to dynamically adapt the user interface to specialized ontologies merged into DEVA.

CGP lil-gp 2.1;1.02 User's Manual

NASA Technical Reports Server (NTRS)

Janikow, Cezary Z.; DeWeese, Scott W.

1997-01-01

This document describes extensions provided to lil-gp facilitating dealing with constraints. This document deals specifically with lil-gp 1.02, and the resulting extension is referred to as CGP lil-gp 2.1; 1.02 (the first version is for the extension, the second for the utilized lil-gp version). Unless explicitly needed to avoid confusion, version numbers are omitted.

Extent and content of data for regulatory submissions: First-in-human and marketing authorization--Viewpoint of US industry.

PubMed

Harris, Ian Ross

2015-09-01

The amount and type of data in regulatory submissions increases dramatically from the first-in-human clinical trials application through to the extensive dossier that is required for marketing authorization. The Pharmaceuticals and Biotechnology industries are very familiar with the requirements and expectations of Health Authorities for small molecule and biologics, but have limited experience for cell-based therapies. Fortunately, the United States Food and Drug Administration (FDA) and European Medicines agency (EMA) Committee for Advanced Therapies (CAT) have considerable experience in regulating cell therapies and have provided extensive Guidance documents for developers. The Agencies offers advice to Sponsors through a variety of meetings. However, it is incumbent on the Sponsor to understand the regulations, interpret the Guidance documents and formulate clear company positions to enable the Agency to provide clear feedback. It is important for Sponsors to understand the factors that are critical for the safety and efficacy of their product and to demonstrate to the Health Authorities that they have a control strategy that ensures safety and efficacy during all stages of development. The focus of this paper is to describe some of the challenges for the chemistry manufacturing and controls (CMC) for cell therapies being development internationally. Copyright © 2015.

Studies in Software Cost Model Behavior: Do We Really Understand Cost Model Performance?

NASA Technical Reports Server (NTRS)

Lum, Karen; Hihn, Jairus; Menzies, Tim

2006-01-01

While there exists extensive literature on software cost estimation techniques, industry practice continues to rely upon standard regression-based algorithms. These software effort models are typically calibrated or tuned to local conditions using local data. This paper cautions that current approaches to model calibration often produce sub-optimal models because of the large variance problem inherent in cost data and by including far more effort multipliers than the data supports. Building optimal models requires that a wider range of models be considered while correctly calibrating these models requires rejection rules that prune variables and records and use multiple criteria for evaluating model performance. The main contribution of this paper is to document a standard method that integrates formal model identification, estimation, and validation. It also documents what we call the large variance problem that is a leading cause of cost model brittleness or instability.

Hierarchical Testing with Automated Document Generation for Amanzi, ASCEM's Subsurface Flow and Reactive Transport Simulator

NASA Astrophysics Data System (ADS)

Moulton, J. D.; Steefel, C. I.; Yabusaki, S.; Castleton, K.; Scheibe, T. D.; Keating, E. H.; Freedman, V. L.

2013-12-01

The Advanced Simulation Capabililty for Environmental Management (ASCEM) program is developing an approach and open-source tool suite for standardized risk and performance assessments at legacy nuclear waste sites. These assessments use a graded and iterative approach, beginning with simplified highly abstracted models, and adding geometric and geologic complexity as understanding is gained. To build confidence in this assessment capability, extensive testing of the underlying tools is needed. Since the tools themselves, such as the subsurface flow and reactive-transport simulator, Amanzi, are under active development, testing must be both hierarchical and highly automated. In this presentation we show how we have met these requirements, by leveraging the python-based open-source documentation system called Sphinx with several other open-source tools. Sphinx builds on the reStructured text tool docutils, with important extensions that include high-quality formatting of equations, and integrated plotting through matplotlib. This allows the documentation, as well as the input files for tests, benchmark and tutorial problems, to be maintained with the source code under a version control system. In addition, it enables developers to build documentation in several different formats (e.g., html and pdf) from a single source. We will highlight these features, and discuss important benefits of this approach for Amanzi. In addition, we'll show that some of ASCEM's other tools, such as the sampling provided by the Uncertainty Quantification toolset, are naturally leveraged to enable more comprehensive testing. Finally, we will highlight the integration of this hiearchical testing and documentation framework with our build system and tools (CMake, CTest, and CDash).

Flat-plate solar array project. Volume 6: Engineering sciences and reliability

NASA Technical Reports Server (NTRS)

Ross, R. G., Jr.; Smokler, M. I.

1986-01-01

The Flat-Plate Solar Array (FSA) Project activities directed at developing the engineering technology base required to achieve modules that meet the functional, safety, and reliability requirements of large scale terrestrial photovoltaic systems applications are reported. These activities included: (1) development of functional, safety, and reliability requirements for such applications; (2) development of the engineering analytical approaches, test techniques, and design solutions required to meet the requirements; (3) synthesis and procurement of candidate designs for test and evaluation; and (4) performance of extensive testing, evaluation, and failure analysis of define design shortfalls and, thus, areas requiring additional research and development. A summary of the approach and technical outcome of these activities are provided along with a complete bibliography of the published documentation covering the detailed accomplishments and technologies developed.

77 FR 35268 - Standards for Living Organisms in Ships' Ballast Water Discharged in U.S. Waters

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-13

...On March 23, 2012, the Coast Guard published in the Federal Register a Final Rule entitled ``Standards for Living Organisms in Ships' Ballast Water Discharged in U.S. Waters''. The rulemaking triggered new information collection requirements affecting vessel owners and their potential requests for an extension of the compliance date if they cannot practicably comply with the compliance date otherwise applicable to their vessels. This document announces that the request to revise the existing collection of information to add the new request for an extension provision has been approved by the Office of Management and Budget (OMB) and may now be enforced. The OMB control number is 1625-0069.

Guidance and Control Software Project Data - Volume 1: Planning Documents

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J. (Editor)

2008-01-01

The Guidance and Control Software (GCS) project was the last in a series of software reliability studies conducted at Langley Research Center between 1977 and 1994. The technical results of the GCS project were recorded after the experiment was completed. Some of the support documentation produced as part of the experiment, however, is serving an unexpected role far beyond its original project context. Some of the software used as part of the GCS project was developed to conform to the RTCA/DO-178B software standard, "Software Considerations in Airborne Systems and Equipment Certification," used in the civil aviation industry. That standard requires extensive documentation throughout the software development life cycle, including plans, software requirements, design and source code, verification cases and results, and configuration management and quality control data. The project documentation that includes this information is open for public scrutiny without the legal or safety implications associated with comparable data from an avionics manufacturer. This public availability has afforded an opportunity to use the GCS project documents for DO-178B training. This report provides a brief overview of the GCS project, describes the 4-volume set of documents and the role they are playing in training, and includes the planning documents from the GCS project. Volume 1 contains five appendices: A. Plan for Software Aspects of Certification for the Guidance and Control Software Project; B. Software Development Standards for the Guidance and Control Software Project; C. Software Verification Plan for the Guidance and Control Software Project; D. Software Configuration Management Plan for the Guidance and Control Software Project; and E. Software Quality Assurance Activities.

Guidance and Control Software Project Data - Volume 3: Verification Documents

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J. (Editor)

2008-01-01

The Guidance and Control Software (GCS) project was the last in a series of software reliability studies conducted at Langley Research Center between 1977 and 1994. The technical results of the GCS project were recorded after the experiment was completed. Some of the support documentation produced as part of the experiment, however, is serving an unexpected role far beyond its original project context. Some of the software used as part of the GCS project was developed to conform to the RTCA/DO-178B software standard, "Software Considerations in Airborne Systems and Equipment Certification," used in the civil aviation industry. That standard requires extensive documentation throughout the software development life cycle, including plans, software requirements, design and source code, verification cases and results, and configuration management and quality control data. The project documentation that includes this information is open for public scrutiny without the legal or safety implications associated with comparable data from an avionics manufacturer. This public availability has afforded an opportunity to use the GCS project documents for DO-178B training. This report provides a brief overview of the GCS project, describes the 4-volume set of documents and the role they are playing in training, and includes the verification documents from the GCS project. Volume 3 contains four appendices: A. Software Verification Cases and Procedures for the Guidance and Control Software Project; B. Software Verification Results for the Pluto Implementation of the Guidance and Control Software; C. Review Records for the Pluto Implementation of the Guidance and Control Software; and D. Test Results Logs for the Pluto Implementation of the Guidance and Control Software.

Analytical Approaches to Guide SLS Fault Management (FM) Development

NASA Technical Reports Server (NTRS)

Patterson, Jonathan D.

2012-01-01

Extensive analysis is needed to determine the right set of FM capabilities to provide the most coverage without significantly increasing the cost, reliability (FP/FN), and complexity of the overall vehicle systems. Strong collaboration with the stakeholders is required to support the determination of the best triggers and response options. The SLS Fault Management process has been documented in the Space Launch System Program (SLSP) Fault Management Plan (SLS-PLAN-085).

Mental Health Nursing, Mechanical Restraint Measures and Patients’ Legal Rights

PubMed Central

Birkeland, Soren; Gildberg, Frederik A.

2016-01-01

Coercive mechanical restraint (MR) in psychiatry constitutes the perhaps most extensive exception from the common health law requirement for involving patients in health care decisions and achieving their informed consent prior to treatment. Coercive measures and particularly MR seriously collide with patient autonomy principles, pose a particular challenge to psychiatric patients’ legal rights, and put intensified demands on health professional performance. Legal rights principles require rationale for coercive measure use be thoroughly considered and rigorously documented. This article presents an in-principle Danish Psychiatric Complaint Board decision concerning MR use initiated by untrained staff. The case illustrates that, judicially, weight must be put on the patient perspective on course of happenings and especially when health professional documentation is scant, patients’ rights call for taking notice of patient evaluations. Consequently, if it comes out that psychiatric staff failed to pay appropriate consideration for the patient’s mental state, perspective, and expressions, patient response deviations are to be judicially interpreted in this light potentially rendering MR use illegitimated. While specification of law criteria might possibly improve law use and promote patients’ rights, education of psychiatry professionals must address the need for, as far as possible, paying due regard to meeting patient perspectives and participation principles as well as formal law and documentation requirements. PMID:27123152

Guidance and Control Software Project Data - Volume 4: Configuration Management and Quality Assurance Documents

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J. (Editor)

2008-01-01

The Guidance and Control Software (GCS) project was the last in a series of software reliability studies conducted at Langley Research Center between 1977 and 1994. The technical results of the GCS project were recorded after the experiment was completed. Some of the support documentation produced as part of the experiment, however, is serving an unexpected role far beyond its original project context. Some of the software used as part of the GCS project was developed to conform to the RTCA/DO-178B software standard, "Software Considerations in Airborne Systems and Equipment Certification," used in the civil aviation industry. That standard requires extensive documentation throughout the software development life cycle, including plans, software requirements, design and source code, verification cases and results, and configuration management and quality control data. The project documentation that includes this information is open for public scrutiny without the legal or safety implications associated with comparable data from an avionics manufacturer. This public availability has afforded an opportunity to use the GCS project documents for DO-178B training. This report provides a brief overview of the GCS project, describes the 4-volume set of documents and the role they are playing in training, and includes configuration management and quality assurance documents from the GCS project. Volume 4 contains six appendices: A. Software Accomplishment Summary for the Guidance and Control Software Project; B. Software Configuration Index for the Guidance and Control Software Project; C. Configuration Management Records for the Guidance and Control Software Project; D. Software Quality Assurance Records for the Guidance and Control Software Project; E. Problem Report for the Pluto Implementation of the Guidance and Control Software Project; and F. Support Documentation Change Reports for the Guidance and Control Software Project.

CDAPubMed: a browser extension to retrieve EHR-based biomedical literature.

PubMed

Perez-Rey, David; Jimenez-Castellanos, Ana; Garcia-Remesal, Miguel; Crespo, Jose; Maojo, Victor

2012-04-05

Over the last few decades, the ever-increasing output of scientific publications has led to new challenges to keep up to date with the literature. In the biomedical area, this growth has introduced new requirements for professionals, e.g., physicians, who have to locate the exact papers that they need for their clinical and research work amongst a huge number of publications. Against this backdrop, novel information retrieval methods are even more necessary. While web search engines are widespread in many areas, facilitating access to all kinds of information, additional tools are required to automatically link information retrieved from these engines to specific biomedical applications. In the case of clinical environments, this also means considering aspects such as patient data security and confidentiality or structured contents, e.g., electronic health records (EHRs). In this scenario, we have developed a new tool to facilitate query building to retrieve scientific literature related to EHRs. We have developed CDAPubMed, an open-source web browser extension to integrate EHR features in biomedical literature retrieval approaches. Clinical users can use CDAPubMed to: (i) load patient clinical documents, i.e., EHRs based on the Health Level 7-Clinical Document Architecture Standard (HL7-CDA), (ii) identify relevant terms for scientific literature search in these documents, i.e., Medical Subject Headings (MeSH), automatically driven by the CDAPubMed configuration, which advanced users can optimize to adapt to each specific situation, and (iii) generate and launch literature search queries to a major search engine, i.e., PubMed, to retrieve citations related to the EHR under examination. CDAPubMed is a platform-independent tool designed to facilitate literature searching using keywords contained in specific EHRs. CDAPubMed is visually integrated, as an extension of a widespread web browser, within the standard PubMed interface. It has been tested on a public dataset of HL7-CDA documents, returning significantly fewer citations since queries are focused on characteristics identified within the EHR. For instance, compared with more than 200,000 citations retrieved by breast neoplasm, fewer than ten citations were retrieved when ten patient features were added using CDAPubMed. This is an open source tool that can be freely used for non-profit purposes and integrated with other existing systems.

CDAPubMed: a browser extension to retrieve EHR-based biomedical literature

PubMed Central

2012-01-01

Background Over the last few decades, the ever-increasing output of scientific publications has led to new challenges to keep up to date with the literature. In the biomedical area, this growth has introduced new requirements for professionals, e.g., physicians, who have to locate the exact papers that they need for their clinical and research work amongst a huge number of publications. Against this backdrop, novel information retrieval methods are even more necessary. While web search engines are widespread in many areas, facilitating access to all kinds of information, additional tools are required to automatically link information retrieved from these engines to specific biomedical applications. In the case of clinical environments, this also means considering aspects such as patient data security and confidentiality or structured contents, e.g., electronic health records (EHRs). In this scenario, we have developed a new tool to facilitate query building to retrieve scientific literature related to EHRs. Results We have developed CDAPubMed, an open-source web browser extension to integrate EHR features in biomedical literature retrieval approaches. Clinical users can use CDAPubMed to: (i) load patient clinical documents, i.e., EHRs based on the Health Level 7-Clinical Document Architecture Standard (HL7-CDA), (ii) identify relevant terms for scientific literature search in these documents, i.e., Medical Subject Headings (MeSH), automatically driven by the CDAPubMed configuration, which advanced users can optimize to adapt to each specific situation, and (iii) generate and launch literature search queries to a major search engine, i.e., PubMed, to retrieve citations related to the EHR under examination. Conclusions CDAPubMed is a platform-independent tool designed to facilitate literature searching using keywords contained in specific EHRs. CDAPubMed is visually integrated, as an extension of a widespread web browser, within the standard PubMed interface. It has been tested on a public dataset of HL7-CDA documents, returning significantly fewer citations since queries are focused on characteristics identified within the EHR. For instance, compared with more than 200,000 citations retrieved by breast neoplasm, fewer than ten citations were retrieved when ten patient features were added using CDAPubMed. This is an open source tool that can be freely used for non-profit purposes and integrated with other existing systems. PMID:22480327

Taking advantage of continuity of care documents to populate a research repository.

PubMed

Klann, Jeffrey G; Mendis, Michael; Phillips, Lori C; Goodson, Alyssa P; Rocha, Beatriz H; Goldberg, Howard S; Wattanasin, Nich; Murphy, Shawn N

2015-03-01

Clinical data warehouses have accelerated clinical research, but even with available open source tools, there is a high barrier to entry due to the complexity of normalizing and importing data. The Office of the National Coordinator for Health Information Technology's Meaningful Use Incentive Program now requires that electronic health record systems produce standardized consolidated clinical document architecture (C-CDA) documents. Here, we leverage this data source to create a low volume standards based import pipeline for the Informatics for Integrating Biology and the Bedside (i2b2) clinical research platform. We validate this approach by creating a small repository at Partners Healthcare automatically from C-CDA documents. We designed an i2b2 extension to import C-CDAs into i2b2. It is extensible to other sites with variances in C-CDA format without requiring custom code. We also designed new ontology structures for querying the imported data. We implemented our methodology at Partners Healthcare, where we developed an adapter to retrieve C-CDAs from Enterprise Services. Our current implementation supports demographics, encounters, problems, and medications. We imported approximately 17 000 clinical observations on 145 patients into i2b2 in about 24 min. We were able to perform i2b2 cohort finding queries and view patient information through SMART apps on the imported data. This low volume import approach can serve small practices with local access to C-CDAs and will allow patient registries to import patient supplied C-CDAs. These components will soon be available open source on the i2b2 wiki. Our approach will lower barriers to entry in implementing i2b2 where informatics expertise or data access are limited. © The Author 2014. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

LaTeX for Agricultural Extension Professionals

USDA-ARS?s Scientific Manuscript database

LaTeX is a free open source document preparation system for professional quality documents and presentation materials. Extension professionals, trying to reach their audience though various forms of printed and online resources, can benefit from the vast potential of LaTeX. Using LaTeX empowers the ...

Desktop document delivery using portable document format (PDF) files and the Web.

PubMed Central

Shipman, J P; Gembala, W L; Reeder, J M; Zick, B A; Rainwater, M J

1998-01-01

Desktop access to electronic full-text literature was rated one of the most desirable services in a client survey conducted by the University of Washington Libraries. The University of Washington Health Sciences Libraries (UW HSL) conducted a ten-month pilot test from August 1996 to May 1997 to determine the feasibility of delivering electronic journal articles via the Internet to remote faculty. Articles were scanned into Adobe Acrobat Portable Document Format (PDF) files and delivered to individuals using Multipurpose Internet Mail Extensions (MIME) standard e-mail attachments and the Web. Participants retrieved scanned articles and used the Adobe Acrobat Reader software to view and print files. The pilot test required a special programming effort to automate the client notification and file deletion processes. Test participants were satisfied with the pilot test despite some technical difficulties. Desktop delivery is now offered as a routine delivery method from the UW HSL. PMID:9681165

Desktop document delivery using portable document format (PDF) files and the Web.

PubMed

Shipman, J P; Gembala, W L; Reeder, J M; Zick, B A; Rainwater, M J

1998-07-01

Desktop access to electronic full-text literature was rated one of the most desirable services in a client survey conducted by the University of Washington Libraries. The University of Washington Health Sciences Libraries (UW HSL) conducted a ten-month pilot test from August 1996 to May 1997 to determine the feasibility of delivering electronic journal articles via the Internet to remote faculty. Articles were scanned into Adobe Acrobat Portable Document Format (PDF) files and delivered to individuals using Multipurpose Internet Mail Extensions (MIME) standard e-mail attachments and the Web. Participants retrieved scanned articles and used the Adobe Acrobat Reader software to view and print files. The pilot test required a special programming effort to automate the client notification and file deletion processes. Test participants were satisfied with the pilot test despite some technical difficulties. Desktop delivery is now offered as a routine delivery method from the UW HSL.

The Victor C++ library for protein representation and advanced manipulation.

PubMed

Hirsh, Layla; Piovesan, Damiano; Giollo, Manuel; Ferrari, Carlo; Tosatto, Silvio C E

2015-04-01

Protein sequence and structure representation and manipulation require dedicated software libraries to support methods of increasing complexity. Here, we describe the VIrtual Constrution TOol for pRoteins (Victor) C++ library, an open source platform dedicated to enabling inexperienced users to develop advanced tools and gathering contributions from the community. The provided application examples cover statistical energy potentials, profile-profile sequence alignments and ab initio loop modeling. Victor was used over the last 15 years in several publications and optimized for efficiency. It is provided as a GitHub repository with source files and unit tests, plus extensive online documentation, including a Wiki with help files and tutorials, examples and Doxygen documentation. The C++ library and online documentation, distributed under a GPL license are available from URL: http://protein.bio.unipd.it/victor/. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Extensive video-game experience alters cortical networks for complex visuomotor transformations.

PubMed

Granek, Joshua A; Gorbet, Diana J; Sergio, Lauren E

2010-10-01

Using event-related functional magnetic resonance imaging (fMRI), we examined the effect of video-game experience on the neural control of increasingly complex visuomotor tasks. Previously, skilled individuals have demonstrated the use of a more efficient movement control brain network, including the prefrontal, premotor, primary sensorimotor and parietal cortices. Our results extend and generalize this finding by documenting additional prefrontal cortex activity in experienced video gamers planning for complex eye-hand coordination tasks that are distinct from actual video-game play. These changes in activation between non-gamers and extensive gamers are putatively related to the increased online control and spatial attention required for complex visually guided reaching. These data suggest that the basic cortical network for processing complex visually guided reaching is altered by extensive video-game play. Crown Copyright © 2009. Published by Elsevier Srl. All rights reserved.

An Aircraft Lifecycle Approach for the Cost-Benefit Analysis of Prognostics and Condition-Based Maintenance-Based on Discrete-Event Simulation

DTIC Science & Technology

2014-10-02

MPD. This manufacturer documentation contains maintenance tasks with specification of intervals and required man-hours that are to be carried out...failures, without consideration of false alarms and missed failures (see also section 4.1.3). The task redundancy rate is the percentage of preventive...Prognostics and Health Management ROI return on investment RUL remaining useful life TCG task code group SB Service Bulletin XML Extensible Markup

76 FR 48874 - Agency Information Collection Activities: Form G-884, Extension of an Existing Information...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-09

... Activities: Form G-884, Extension of an Existing Information Collection; Comment Request ACTION: 30-Day Notice of Information Collection Under Review: Form G- 884, Request for the Return of Original Document(s... information technology, e.g., permitting electronic submission of responses. Overview of This Information...

An Introduction to the Extensible Markup Language (XML).

ERIC Educational Resources Information Center

Bryan, Martin

1998-01-01

Describes Extensible Markup Language (XML), a subset of the Standard Generalized Markup Language (SGML) that is designed to make it easy to interchange structured documents over the Internet. Topics include Document Type Definition (DTD), components of XML, the use of XML, text and non-text elements, and uses for XML-coded files. (LRW)

Laboratory Diagnosis of Parasites from the Gastrointestinal Tract.

PubMed

Garcia, Lynne S; Arrowood, Michael; Kokoskin, Evelyne; Paltridge, Graeme P; Pillai, Dylan R; Procop, Gary W; Ryan, Norbert; Shimizu, Robyn Y; Visvesvara, Govinda

2018-01-01

This Practical Guidance for Clinical Microbiology document on the laboratory diagnosis of parasites from the gastrointestinal tract provides practical information for the recovery and identification of relevant human parasites. The document is based on a comprehensive literature review and expert consensus on relevant diagnostic methods. However, it does not include didactic information on human parasite life cycles, organism morphology, clinical disease, pathogenesis, treatment, or epidemiology and prevention. As greater emphasis is placed on neglected tropical diseases, it becomes highly probable that patients with gastrointestinal parasitic infections will become more widely recognized in areas where parasites are endemic and not endemic. Generally, these methods are nonautomated and require extensive bench experience for accurate performance and interpretation. Copyright © 2017 American Society for Microbiology.

An open annotation ontology for science on web 3.0

PubMed Central

2011-01-01

Background There is currently a gap between the rich and expressive collection of published biomedical ontologies, and the natural language expression of biomedical papers consumed on a daily basis by scientific researchers. The purpose of this paper is to provide an open, shareable structure for dynamic integration of biomedical domain ontologies with the scientific document, in the form of an Annotation Ontology (AO), thus closing this gap and enabling application of formal biomedical ontologies directly to the literature as it emerges. Methods Initial requirements for AO were elicited by analysis of integration needs between biomedical web communities, and of needs for representing and integrating results of biomedical text mining. Analysis of strengths and weaknesses of previous efforts in this area was also performed. A series of increasingly refined annotation tools were then developed along with a metadata model in OWL, and deployed for feedback and additional requirements the ontology to users at a major pharmaceutical company and a major academic center. Further requirements and critiques of the model were also elicited through discussions with many colleagues and incorporated into the work. Results This paper presents Annotation Ontology (AO), an open ontology in OWL-DL for annotating scientific documents on the web. AO supports both human and algorithmic content annotation. It enables “stand-off” or independent metadata anchored to specific positions in a web document by any one of several methods. In AO, the document may be annotated but is not required to be under update control of the annotator. AO contains a provenance model to support versioning, and a set model for specifying groups and containers of annotation. AO is freely available under open source license at http://purl.org/ao/, and extensive documentation including screencasts is available on AO’s Google Code page: http://code.google.com/p/annotation-ontology/ . Conclusions The Annotation Ontology meets critical requirements for an open, freely shareable model in OWL, of annotation metadata created against scientific documents on the Web. We believe AO can become a very useful common model for annotation metadata on Web documents, and will enable biomedical domain ontologies to be used quite widely to annotate the scientific literature. Potential collaborators and those with new relevant use cases are invited to contact the authors. PMID:21624159

An open annotation ontology for science on web 3.0.

PubMed

Ciccarese, Paolo; Ocana, Marco; Garcia Castro, Leyla Jael; Das, Sudeshna; Clark, Tim

2011-05-17

There is currently a gap between the rich and expressive collection of published biomedical ontologies, and the natural language expression of biomedical papers consumed on a daily basis by scientific researchers. The purpose of this paper is to provide an open, shareable structure for dynamic integration of biomedical domain ontologies with the scientific document, in the form of an Annotation Ontology (AO), thus closing this gap and enabling application of formal biomedical ontologies directly to the literature as it emerges. Initial requirements for AO were elicited by analysis of integration needs between biomedical web communities, and of needs for representing and integrating results of biomedical text mining. Analysis of strengths and weaknesses of previous efforts in this area was also performed. A series of increasingly refined annotation tools were then developed along with a metadata model in OWL, and deployed for feedback and additional requirements the ontology to users at a major pharmaceutical company and a major academic center. Further requirements and critiques of the model were also elicited through discussions with many colleagues and incorporated into the work. This paper presents Annotation Ontology (AO), an open ontology in OWL-DL for annotating scientific documents on the web. AO supports both human and algorithmic content annotation. It enables "stand-off" or independent metadata anchored to specific positions in a web document by any one of several methods. In AO, the document may be annotated but is not required to be under update control of the annotator. AO contains a provenance model to support versioning, and a set model for specifying groups and containers of annotation. AO is freely available under open source license at http://purl.org/ao/, and extensive documentation including screencasts is available on AO's Google Code page: http://code.google.com/p/annotation-ontology/ . The Annotation Ontology meets critical requirements for an open, freely shareable model in OWL, of annotation metadata created against scientific documents on the Web. We believe AO can become a very useful common model for annotation metadata on Web documents, and will enable biomedical domain ontologies to be used quite widely to annotate the scientific literature. Potential collaborators and those with new relevant use cases are invited to contact the authors.

E-ELT requirements management

NASA Astrophysics Data System (ADS)

Schneller, D.

2014-08-01

The E-ELT has completed its design phase and is now entering construction. ESO is acting as prime contractor and usually procures subsystems, including their design, from industry. This, in turn, leads to a large number of requirements, whose validity, consistency and conformity with user needs requires extensive management. Therefore E-ELT Systems Engineering has chosen to follow a systematic approach, based on a reasoned requirement architecture that follows the product breakdown structure of the observatory. The challenge ahead is the controlled flow-down of science user needs into engineering requirements, requirement specifications and system design documents. This paper shows how the E-ELT project manages this. The project has adopted IBM DOORTM as a supporting requirements management tool. This paper deals with emerging problems and pictures potential solutions. It shows trade-offs made to reach a proper balance between the effort put in this activity and potential overheads, and the benefit for the project.

GSFC Systems Test and Operation Language (STOL) functional requirements and language description

NASA Technical Reports Server (NTRS)

Desjardins, R.; Hall, G.; Mcguire, J.; Merwarth, P.; Mocarsky, W.; Truszkowski, W.; Villasenor, A.; Brosi, F.; Burch, P.; Carey, D.

1978-01-01

The Systems Tests and Operation Language (STOL) provides the means for user communication with payloads, applications programs, and other ground system elements. It is a systems operation language that enables an operator or user to communicate a command to a computer system. The system interprets each high level language directive from the user and performs the indicated action, such as executing a program, printing out a snapshot, or sending a payload command. This document presents the following: (1) required language features and implementation considerations; (2) basic capabilities; (3) telemetry, command, and input/output directives; (4) procedure definition and control; (5) listing, extension, and STOL nucleus capabilities.

[Harmonisation of the Marketing Authorisation Application dossier: perspectives due to harmonised requirements. Assessing Rules and the Common Technical Document].

PubMed

Menges, Klaus

2008-07-01

Assessing Rules for Marketing Authorisation Applications and the Common Technical Document provide the framework regarding data-related requirements and regarding the structural requirements of marketing authorisation application dossiers, similar to the structural levels and rooms of buildings on the one hand and their interior equipment on the other hand. Since the 1970s requirements about how to submit application dossiers and how to assess them have become increasingly harmonised, aiming for the use of a single format and identical rules for assessment. In regard of the format, harmonisation has been achieved beyond Europe by implementing the mandatory use of CTD in the three main regions of interests of the pharmaceutical industry, Japan, the United States of America and Europe. The assessment rules have been extensively harmonised throughout Europe in a way that the same rules apply to the marketing authorisation applications submitted in Germany as well as in other Member States. Different interpretations of the guidance documents, different understanding of the provided data or divergent conclusions drawn up may still occur. All stakeholders within the European network of Drug Regulatory Affairs will act on the level floor of the European and--apart from some exceptions--also nationally implemented legislation. This will not only serve the internationally acting pharmaceutical companies' interests but also consumer interests in obtaining consistent information on drug products based on transparent rules safeguarding the necessary pharmaceutical quality, efficacy and safety with respect to an adequate risk-benefit relationship.

Hoisting and Rigging (Formerly Hoisting and Rigging Manual)

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

This standard is intended as a reference document to be used by supervisors, line managers, safety personnel, equipment operators, and any other personnel responsible for safety of hoisting and rigging operations at DOE sites. It quotes or paraphrases the US OSHA and ANSI requirements. It also encompasses, under one cover,hoisting and rigging requirements, codes, standards, and regulations, eliminating the need to maintain extensive (and often incomplete) libraries of hoisting and rigging standards throughout DOE. The standard occasionally goes beyond the minimum general industry standards established by OSHA and ANSI, and also delineates the more stringent requirements necessary to accomplish themore » complex, diversified, critical, and often hazardous hoisting and rigging work found with the DOE complex.« less

Extensible Markup Language: How Might It Alter the Software Documentation Process and the Role of the Technical Communicator?

ERIC Educational Resources Information Center

Battalio, John T.

2002-01-01

Describes the influence that Extensible Markup Language (XML) will have on the software documentation process and subsequently on the curricula of advanced undergraduate and master's programs in technical communication. Recommends how curricula of advanced undergraduate and master's programs in technical communication ought to change in order to…

Administrative Subpoenas in Criminal Investigations: A Brief Legal Analysis

DTIC Science & Technology

2006-03-17

child abuse , Secret Service protection, controlled substance cases, and Inspector General investigations. As a constitutional matter, the Fourth Amendment only demands that administrative subpoenas be reasonable, a standard that requires that 1) they satisfy the terms of the authorizing statute, 2) the documents requested are relevant to the investigation, 3) the information sought is not already in the government’s possession, and 4) enforcing the subpoena will not constitute an abuse of the court’s process. Although more extensive proposals were offered in the

Radiological Protection Studies for NGLS XTOD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xiao, Shanjie; Santana-Leitner, Mario; Rokni, Sayed

The X-ray transport, optics and diagnostic system (XTOD) starts from the end of bending magnets sending electrons to the main dump and ends at the end wall separating the accelerator tunnel from the user experimental hall (hereafter referred as EH wall), as shown in Figure 1. Figure 1.a shows the general schematic and Figure 1.b shows the initial layout with possible shielding components. This document summarizes the extensive studies on the shielding and collimator system design necessary to meet the radiation protection requirements.

NDT applications in a successful fracture critical bridge inspection program and anchor bolt inspection program

NASA Astrophysics Data System (ADS)

Fish, Philip E.

1995-05-01

In 1978, Wisconsin Department of Transportation discovered major cracking on a two-girder, fracture critical structure, just four years after it was constructed. In 1981, on the same structure, now seven years old, major cracking was discovered in the tie girder flange of the tied arch span. This is one example of the type of failures that transportation departments discovered on welded structures in the 1970's and '80's. The failures from welded details and pinned connections lead to much stricter standards for present day designs. All areas were affected: design with identification of fatigue-prone details and classification of fatigue categories; material requirements with emphasis on toughness and weldability; increased welding and fabrication standards with licensure of fabrication shops to minimum quality standards including personnel; and an increased effort on inspection of existing bridges, where critical details were overlooked or missed in the past. FHWA inspection requirements for existing structures increased through this same time period, in reaction to the failures that had occurred. Obviously, many structures in Wisconsin were not built to the standards now required, thus the importance for quality inspection techniques. The new FHWA inspection requirements now being implemented throughout the nation require an in-depth, hands-on type inspection at a specified frequency, on all fracture critical structures. Wisconsin Department of Transportation started an in-depth inspection program in 1985 and made it a full time program in 1987. This program included extensive nondestructive testing. Ultrasonic inspection has played a major role in this type of inspection. All fracture critical structures, pin and hanger systems, and pinned connections are inspected on a five-year cycle now. The program requires an experienced inspection team and a practical inspection approach. Extensive preparation is required with review of all design, construction, and maintenance documents. An inspection plan is developed from the review and downloaded to a laptop computer. Inspection emphasis are on 'hands on' visual and nondestructive evaluation. Report documentation includes all design plans, pictorial documentation of structural deficiencies, nondestructive evaluation reports, conclusions, and recommendations. Planned changes in the program include implementation of an engineering work station as a 'single source' information file and reporting file for the inspection program. This would include scanning all current information into the file such as design, construction, and maintenance history. It would also include all inspection data with pictures. Inspections would be performed by downloading data onto a laptop and then uploading after completion of inspection. Pictures and nondestructive data would be entered by digital disks.

SU-F-P-05: Initial Experience with an Independent Certification Program for Stereotactic Radiosurgery and Stereotactic Body Radiation Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solberg, T; Robar, J; Gevaert, T

Purpose: The ASTRO document “Safety is no accident: A FRAMEWORK FOR QUALITY RADIATION ONCOLOGY AND CARE” recommends external reviews of specialized modalities. The purpose of this presentation is to describe the implementation of such a program for Stereotactic Radiosurgery (SRS) and Stereotactic Body radiation Therapy (SBRT). Methods: The margin of error for SRS and SBRT delivery is significantly smaller than that of conventional radiotherapy and therefore requires special attention and diligence. The Novalis Certified program was created to fill an unmet need for specialized SRS / SBRT credentialing. A standards document was drafted by a panel of experts from severalmore » disciplines, including medical physics, radiation oncology and neurosurgery. The document, based on national and international standards, covers requirements in program structure, personnel, training, clinical application, technology, quality management, and patient and equipment QA. The credentialing process was modeled after existing certification programs and includes an institution-generated self-study, extensive document review and an onsite audit. Reviewers generate a descriptive report, which is reviewed by a multidisciplinary expert panel. Outcomes of the review may include mandatory requirements and optional recommendations. Results: 15 institutions have received Novalis Certification, including 3 in the US, 7 in Europe, 4 in Australia and 1 in Asia. 87 other centers are at various stages of the process. Nine reviews have resulted in mandatory requirements, however all of these were addressed within three months of the audit report. All reviews have produced specific recommendations ranging from programmatic to technical in nature. Institutions felt that the credentialing process addressed a critical need and was highly valuable to the institution. Conclusion: Novalis Certification is a unique peer review program assessing safety and quality in SRS and SBRT, while recognizing international practice standards. The approach is capable of highlighting outstanding requirements and providing recommendations to enhance both new and established programs. Timothy Solberg is co-owner of Global Radiosurgery services, LLC.« less

Optical Property Requirements for Glasses, Ceramics and Plastics in Spacecraft Window Systems

NASA Technical Reports Server (NTRS)

Estes, Lynda

2011-01-01

This is a preliminary draft of a standard published by the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) that is intended to provide uniform window optical design requirements in support of the development of human-rated spaceflight hardware. The material covered in this standard is based on data from extensive testing by the Advanced Sensing and Optical Measurement Branch at NASA Langley Research Center, and compiled into requirements format by the NASA JSC Structural Engineering Division. At the time of this initial document release, a broader technical community has not reviewed this standard. The technical content of this standard is primarily based on the Constellation Program Orion Crew Exploration Vehicle Window Optical Properties Requirements, CxP 72407, Baseline. Unlike other optical requirements documents available for human rated spacecraft, this document includes requirements that ensure functionality for windows that contain glass/ceramic and/or plastic window substrate materials. These requirements were derived by measuring the optical properties of fused silica and aluminosilicate glass window assemblies and ensuring that the performance of any window assembly that includes a plastic pane or panes will meet the performance level of the all-glass assemblies. The resulting requirements are based upon the performance and parameter metrology testing of a variety of materials, including glass, transparent ceramics, acrylics, and polycarbonates. In general, these requirements are minimum specifications for each optical parameter in order to achieve the function specified for each functional category, A through D. Because acrylic materials perform at a higher level than polycarbonates in the optics regime, and CxP/Orion is planning to use acrylic in the Orion spacecraft, these requirements are based heavily on metrology from that material. As a result, two of the current Category D requirements for plastics are cited in such a way that will result in the screening out of polycarbonates. It is acknowledged that many polycarbonates can perform the functions of Category D, such as piloting and imagery with lens with apertures up to 25mm, without performance issues. Therefore, this forward warns users that certain requirements, such as birefringence and wavefront, for Category D plastics need to be revised to allow those polycarbonates that perform adequately in Category D to be accepted, while at the same time, screen out those materials that do not perform up to par. At the time of document release, the requirements in question have been identified by a TBD beside the proposed requirement criteria (which is based upon acrylic performance). Vehicles that are designed with acrylic materials for windowpanes are encouraged to use the values presented in this document for all requirements, in order to ensure adequate optical performance.

Partial Automation of Requirements Tracing

NASA Technical Reports Server (NTRS)

Hayes, Jane; Dekhtyar, Alex; Sundaram, Senthil; Vadlamudi, Sravanthi

2006-01-01

Requirements Tracing on Target (RETRO) is software for after-the-fact tracing of textual requirements to support independent verification and validation of software. RETRO applies one of three user-selectable information-retrieval techniques: (1) term frequency/inverse document frequency (TF/IDF) vector retrieval, (2) TF/IDF vector retrieval with simple thesaurus, or (3) keyword extraction. One component of RETRO is the graphical user interface (GUI) for use in initiating a requirements-tracing project (a pair of artifacts to be traced to each other, such as a requirements spec and a design spec). Once the artifacts have been specified and the IR technique chosen, another component constructs a representation of the artifact elements and stores it on disk. Next, the IR technique is used to produce a first list of candidate links (potential matches between the two artifact levels). This list, encoded in Extensible Markup Language (XML), is optionally processed by a filtering component designed to make the list somewhat smaller without sacrificing accuracy. Through the GUI, the user examines a number of links and returns decisions (yes, these are links; no, these are not links). Coded in XML, these decisions are provided to a "feedback processor" component that prepares the data for the next application of the IR technique. The feedback reduces the incidence of erroneous candidate links. Unlike related prior software, RETRO does not require the user to assign keywords, and automatically builds a document index.

Reframing the Document(ary): Exploring Asylum Policies on Stage

ERIC Educational Resources Information Center

Oberkrome, Friederike

2018-01-01

Ensuing from the concept of Documentality (Steyerl), this paper proposes to reframe documentary practices in refugee theatre. This is based on the observation that documentary theatre during the 'refugee crisis' in 2015 extensively negotiated the role of documents within bureaucratic performances (Jeffers). Following the notion of the document as…

Documentation of the GLAS fourth order general circulation model. Volume 1: Model documentation

NASA Technical Reports Server (NTRS)

Kalnay, E.; Balgovind, R.; Chao, W.; Edelmann, J.; Pfaendtner, J.; Takacs, L.; Takano, K.

1983-01-01

The volume 1, of a 3 volume technical memoranda which contains a documentation of the GLAS Fourth Order General Circulation Model is presented. Volume 1 contains the documentation, description of the stratospheric/tropospheric extension, user's guide, climatological boundary data, and some climate simulation studies.

Environmental Education through Adult Education. A Manual for Adult Educators, Instructors, Teachers and Social Extension Workers.

ERIC Educational Resources Information Center

Rugumayo, Edward B., Comp.; Ibikunle-Johnson, Victor O., Comp.

The purpose of this manual is to make available to adult educators and field extension workers in Kenya resource material that may be used in formal and nonformal training programs for the environmental education of a wide range of target groups. The document begins with a 26-item glossary, an introduction, a section on the document's use,…

Space shuttle propulsion systems on-board checkout and monitoring system development study (extension). Volume 2: Guidelines for for incorporation of the onboard checkout and monitoring function on the space shuttle

NASA Technical Reports Server (NTRS)

1972-01-01

Guidelines are presented for incorporation of the onboard checkout and monitoring function (OCMF) into the designs of the space shuttle propulsion systems. The guidelines consist of and identify supporting documentation; requirements for formulation, implementation, and integration of OCMF; associated compliance verification techniques and requirements; and OCMF terminology and nomenclature. The guidelines are directly applicable to the incorporation of OCMF into the design of space shuttle propulsion systems and the equipment with which the propulsion systems interface. The techniques and general approach, however, are also generally applicable to OCMF incorporation into the design of other space shuttle systems.

Analysis of commercial equipment and instrumentation for Spacelab payloads. Volume 3: Design analysis and trade studies

NASA Technical Reports Server (NTRS)

1974-01-01

A detailed analysis is presented of each selected equipment item, and suitability and cost analyses were documented by equipment item. Tradeoffs of alternative specification requirements are presented which include possible relaxation of vibration, material control, fungus and corrosion requirements for experiment equipment. An additional tradeoff was performed to determine whether it is cost effective to modify experiment equipment to be compatible with a 28-volt dc power source rather than the conventional 110-volt ac source. Programmatic analysis data are given which were used as the basis for the extension of results from the analyses of specific equipment items to the entire spacelab experiment program.

Evolution of the global water cycle on Mars: The geological evidence

NASA Technical Reports Server (NTRS)

Baker, V. R.; Gulick, V. C.

1993-01-01

The geological evidence for active water cycling early in the history of Mars (Noachian geological system or heavy bombardment) consists almost exclusively of fluvial valley networks in the heavily cratered uplands of the planet. It is commonly assumed that these landforms required explanation by atmospheric processes operating above the freezing point of water and at high pressure to allow rainfall and liquid surface runoff. However, it has also been documented that nearly all valley networks probably formed by subsurface outflow and sapping erosion involving groundwater outflow prior to surface-water flow. The prolonged ground-water flow also requires extensive water cycling to maintain hydraulic gradients, but is this done via rainfall recharge, as in terrestrial environments?

The Electronic Documentation Project in the NASA mission control center environment

NASA Technical Reports Server (NTRS)

Wang, Lui; Leigh, Albert

1994-01-01

NASA's space programs like many other technical programs of its magnitude is supported by a large volume of technical documents. These documents are not only diverse but also abundant. Management, maintenance, and retrieval of these documents is a challenging problem by itself; but, relating and cross-referencing this wealth of information when it is all on a medium of paper is an even greater challenge. The Electronic Documentation Project (EDP) is to provide an electronic system capable of developing, distributing and controlling changes for crew/ground controller procedures and related documents. There are two primary motives for the solution. The first motive is to reduce the cost of maintaining the current paper based method of operations by replacing paper documents with electronic information storage and retrieval. And, the other is to improve the efficiency and provide enhanced flexibility in document usage. Initially, the current paper based system will be faithfully reproduced in an electronic format to be used in the document viewing system. In addition, this metaphor will have hypertext extensions. Hypertext features support basic functions such as full text searches, key word searches, data retrieval, and traversal between nodes of information as well as speeding up the data access rate. They enable related but separate documents to have relationships, and allow the user to explore information naturally through non-linear link traversals. The basic operational requirements of the document viewing system are to: provide an electronic corollary to the current method of paper based document usage; supplement and ultimately replace paper-based documents; maintain focused toward control center operations such as Flight Data File, Flight Rules and Console Handbook viewing; and be available NASA wide.

Tank vapor mitigation requirements for Hanford Tank Farms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rakestraw, L.D.

1994-11-15

Westinghouse Hanford Company has contracted Los Alamos Technical Associates to listing of vapors and aerosols that are or may be emitted from the High Level Waste (HLW) tanks at Hanford. Mitigation requirements under Federal and State law, as well as DOE Orders, are included in the listing. The lists will be used to support permitting activities relative to tank farm ventilation system up-grades. This task is designated Task 108 under MJB-SWV-312057 and is an extension of efforts begun under Task 53 of Purchase Order MPB-SVV-03291 5 for Mechanical Engineering Support. The results of that task, which covered only thirty-nine tanks,more » are repeated here to provide a single source document for vapor mitigation requirements for all 177 HLW tanks.« less

Reducing costs of managing and accessing navigation and ancillary data by relying on the extensive capabilities of NASA's spice system

NASA Technical Reports Server (NTRS)

Semenov, Boris V.; Acton, Charles H., Jr.; Bachman, Nathaniel J.; Elson, Lee S.; Wright, Edward D.

2005-01-01

The SPICE system of navigation and ancillary data possesses a number of traits that make its use in modern space missions of all types highly cost efficient. The core of the system is a software library providing API interfaces for storing and retrieving such data as trajectories, orientations, time conversions, and instrument geometry parameters. Applications used at any stage of a mission life cycle can call SPICE APIs to access this data and compute geometric quantities required for observation planning, engineering assessment and science data analysis. SPICE is implemented in three different languages, supported on 20+ computer environments, and distributed with complete source code and documentation. It includes capabilities that are extensively tested by everyday use in many active projects and are applicable to all types of space missions - flyby, orbiters, observatories, landers and rovers. While a customer's initial SPICE adaptation for the first mission or experiment requires a modest effort, this initial effort pays off because adaptation for subsequent missions/experiments is just a small fraction of the initial investment, with the majority of tools based on SPICE requiring no or very minor changes.

Update on US EPA's Revision to the 1985 Guidelines for ...

EPA Pesticide Factsheets

National Water Quality Criteria for the Protection of Aquatic Organisms and Their Uses (Stephan et al. 1985), to reflect the current state-of-the-science for aquatic effects assessments. Following a 2015 public meeting soliciting early input from the scientific community, EPA decided to undertake two overarching parallel tracks for this revision: 1) updating and refining methods for deriving state-of-the-science criteria through comprehensive analyses, and 2) developing criteria more rapidly for the broader protection of aquatic life from the potential adverse effects of the large number of chemicals released into the aquatic environment. The first track reflects that for a smaller group of chemicals, criteria development may be scientifically complex, and deriving robust criteria for these chemicals may require detailed investigation. The second track reflects the recognition that extensive testing of all chemicals is infeasible and there is a need to efficiently derive criteria using approaches that estimate safe environmental concentrations with limited empirical data. Based on these objectives, EPA will develop two criteria documents for this revision: 1) a Comprehensive Guidelines Document, intended to directly update and expand upon approaches presented in the 1985 Guidelines, and that will describe methods that provide criteria for chemicals requiring a more detailed level of evaluation, and 2) an Expedited Guidelines Document, which will focus on criteri

A Dust Aggregation and Concentration System (DACS) for the Microgravity Space Environment

NASA Technical Reports Server (NTRS)

Giovane, F. J.; Blum, J.

1999-01-01

The Dust Aggregation and Concentration System, DACS, Project is an international effort intended to complete the preliminary definition of a system for suspending and concentrating dust particles in a microgravity environment for extended periods of time. The DACS design concept is based on extensive ground, drop tower, and parabolic flight tests. During the present proposed work, the DACS design will be completed, and a Science Requirements Document generated. At the end of the proposed 2 year project, DACS will be positioned to enter the advanced definition phase.

Fifteen-foot diameter modular space station Kennedy Space Center launch site support definition (space station program Phase B extension definition)

NASA Technical Reports Server (NTRS)

Bjorn, L. C.; Martin, M. L.; Murphy, C. W.; Niebla, J. F., V

1971-01-01

This document defines the facilities, equipment, and operational plans required to support the MSS Program at KSC. Included is an analysis of KSC operations, a definition of flow plans, facility utilization and modifications, test plans and concepts, activation, and tradeoff studies. Existing GSE and facilities that have a potential utilization are identified, and new items are defined where possible. The study concludes that the existing facilities are suitable for use in the space station program without major modification from the Saturn-Apollo configuration.

Metis: A Pure Metropolis Markov Chain Monte Carlo Bayesian Inference Library

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bates, Cameron Russell; Mckigney, Edward Allen

The use of Bayesian inference in data analysis has become the standard for large scienti c experiments [1, 2]. The Monte Carlo Codes Group(XCP-3) at Los Alamos has developed a simple set of algorithms currently implemented in C++ and Python to easily perform at-prior Markov Chain Monte Carlo Bayesian inference with pure Metropolis sampling. These implementations are designed to be user friendly and extensible for customization based on speci c application requirements. This document describes the algorithmic choices made and presents two use cases.

Cumulative effects of climate change and ice-wedge degradation, Prudhoe Bay oilfield Alaska

NASA Astrophysics Data System (ADS)

Walker, D. A.; Kanevskiy, M. Z.; Shur, Y.; Raynolds, M. K.; Buchhorn, M.

2016-12-01

Development of Arctic oil & gas resources requires extensive networks of roads, pipelines and other forms of infrastructure. The Prudhoe Bay Oilfield is the largest Arctic oilfield in North America with a long, well-documented history. In a previous publication we analyzed the historical record of high-resolution aerial photos to document the long-term changes to infrastructure extent (1949-2010) for the entire oilfield, and an integrated-geoecological-historical-change-mapping (IGHCM) approach to document terrain changes within 22-km2 areas of the oilfield. We reported the recent widespread expansion of thermokarst, starting in about 1989. Here we examine the annual air-photo record to better pinpoint the years of major change. We also conducted detailed field studies of roadside changes using topographic surveys and soil, vegetation and ice-wedge coring studies. Both sites exhibit extensive ice-wedge degradation that is caused by a combination of a long-term warming trend a series of exceptionally warm summers, and infrastructure-related factors that melted the tops of ice wedges. Near-road thermokarst is enhanced by warmer soils associated with road dust, roadside flooding, near-road pipelines, communication cables, and altered snow regimes. These strongly affect roadside ecosystems and the infrastructure itself. Changes to ecosystems include altered hydrology with the drying of polygon centers and the formation of well-developed high-centered polygons occurs in some areas. Other areas develop extensive flooding and erosion of ice-wedge troughs. An unexpected result of flooding is the stabilization of ice-wedge degradation in some areas because the increased productivity of sedges in the flooded areas is producing large amounts of organic material that protects the tops of ice wedges from further degradation. The large increases in productivity in roadside areas also attract large flocks of waterfowl. Changes to the soils with the addition of thick layers of dust cause decreases in the plant diversity. There are also broad social and economic implications. For example, a flood along the Dalton Highway in 2015 caused extensive degradation of ice wedges, major damage to the Dalton Highway and affected transportation to and from the oilfield for several weeks in Spring 2015.

Extension Specialists: A Self-Analysis.

ERIC Educational Resources Information Center

Gerber, John M.

1985-01-01

To document perceived changes in the role of the extension horticulture specialist, a national survey of state horticulture specialists was conducted in 1983. Extension specialists in horticulture appear to be moving away from the traditional activities of farm visits and personal interaction with individual producers. (CT)

Things That Scientists Don't Understand About NASA Spaceflight Research

NASA Technical Reports Server (NTRS)

Platts, S. H.; Bauer, Terri; Rogers, Shanna

2017-01-01

So you want to conduct human spaceflight research aboard the International Space Station (ISS)? Once your spaceflight research aboard the ISS is proposal is funded.... the real work begins. Because resources are so limited for ISS research, it is necessary to maximize the work being done, while at the same time, minimizing the resources spent. Astronauts may be presented with over 30 human research experiments and select, on average approximately 15 in which to participate. In order to conduct this many studies, ISSMP uses the study requirements provided by the principle investigator to integrate all of this work into the astronauts' complement. The most important thing for investigators to convey to the ISSMP team is their RESEARCH REQUIREMENTS. Requirements are captured in the Experiment document. This document is the official record of how, what, where and when data will be collected. One common mistake that investigators make is not taking this document seriously, but when push comes to shove, if a research requirement is not in this document....it will not get done. The research requirements are then integrated to form a complement of research for each astronaut. What do we mean by integration? Many experiments have overlapping requirements; blood draws, behavioral surveys, heart rate measurement. Where possible, these measures are combined to reduce redundancy and save crew time. Investigators can access these data via data sharing agreements. More examples of how ISS research is integrated will be presented. There are additional limitations commonly associated with human spaceflight research that will also be discussed. Large/heavy hardware, invasive procedures, and toxic reagents are extremely difficult to implement on the ISS. There are strict limits placed on the amount of blood that can be drawn from crew members during (and immediately after) spaceflight. These limits are based on 30-day rolling accumulations. We have recently had to start restricting studies due to this limit. The NASA Human Research Program (HRP) provides extensive support, via ISSMP, to help investigators cope with all of the intricacies of conducting human spaceflight research. This presentation will help you take the best advantage of that support.

Shuttle Case Study Collection Website Development

NASA Technical Reports Server (NTRS)

Ransom, Khadijah S.; Johnson, Grace K.

2012-01-01

As a continuation from summer 2012, the Shuttle Case Study Collection has been developed using lessons learned documented by NASA engineers, analysts, and contractors. Decades of information related to processing and launching the Space Shuttle is gathered into a single database to provide educators with an alternative means to teach real-world engineering processes. The goal is to provide additional engineering materials that enhance critical thinking, decision making, and problem solving skills. During this second phase of the project, the Shuttle Case Study Collection website was developed. Extensive HTML coding to link downloadable documents, videos, and images was required, as was training to learn NASA's Content Management System (CMS) for website design. As the final stage of the collection development, the website is designed to allow for distribution of information to the public as well as for case study report submissions from other educators online.

The Earth System Documentation (ES-DOC) Software Process

NASA Astrophysics Data System (ADS)

Greenslade, M. A.; Murphy, S.; Treshansky, A.; DeLuca, C.; Guilyardi, E.; Denvil, S.

2013-12-01

Earth System Documentation (ES-DOC) is an international project supplying high-quality tools & services in support of earth system documentation creation, analysis and dissemination. It is nurturing a sustainable standards based documentation eco-system that aims to become an integral part of the next generation of exa-scale dataset archives. ES-DOC leverages open source software, and applies a software development methodology that places end-user narratives at the heart of all it does. ES-DOC has initially focused upon nurturing the Earth System Model (ESM) documentation eco-system and currently supporting the following projects: * Coupled Model Inter-comparison Project Phase 5 (CMIP5); * Dynamical Core Model Inter-comparison Project (DCMIP); * National Climate Predictions and Projections Platforms Quantitative Evaluation of Downscaling Workshop. This talk will demonstrate that ES-DOC implements a relatively mature software development process. Taking a pragmatic Agile process as inspiration, ES-DOC: * Iteratively develops and releases working software; * Captures user requirements via a narrative based approach; * Uses online collaboration tools (e.g. Earth System CoG) to manage progress; * Prototypes applications to validate their feasibility; * Leverages meta-programming techniques where appropriate; * Automates testing whenever sensibly feasible; * Streamlines complex deployments to a single command; * Extensively leverages GitHub and Pivotal Tracker; * Enforces strict separation of the UI from underlying API's; * Conducts code reviews.

Using color management in color document processing

NASA Astrophysics Data System (ADS)

Nehab, Smadar

1995-04-01

Color Management Systems have been used for several years in Desktop Publishing (DTP) environments. While this development hasn't matured yet, we are already experiencing the next generation of the color imaging revolution-Device Independent Color for the small office/home office (SOHO) environment. Though there are still open technical issues with device independent color matching, they are not the focal point of this paper. This paper discusses two new and crucial aspects in using color management in color document processing: the management of color objects and their associated color rendering methods; a proposal for a precedence order and handshaking protocol among the various software components involved in color document processing. As color peripherals become affordable to the SOHO market, color management also becomes a prerequisite for common document authoring applications such as word processors. The first color management solutions were oriented towards DTP environments whose requirements were largely different. For example, DTP documents are image-centric, as opposed to SOHO documents that are text and charts centric. To achieve optimal reproduction on low-cost SOHO peripherals, it is critical that different color rendering methods are used for the different document object types. The first challenge in using color management of color document processing is the association of rendering methods with object types. As a result of an evolutionary process, color matching solutions are now available as application software, as driver embedded software and as operating system extensions. Consequently, document processing faces a new challenge, the correct selection of the color matching solution while avoiding duplicate color corrections.

Hanford Waste Vitrification Plant technical manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larson, D.E.; Watrous, R.A.; Kruger, O.L.

1996-03-01

A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. Themore » immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version.« less

Contingency Contractor Optimization Phase 3 Sustainment Requirements Document Contingency Contractor Optimization Tool - Prototype

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bandlow, Alisa; Durfee, Justin David; Frazier, Christopher Rawls

2016-05-01

This requirements document serves as an addendum to the Contingency Contractor Optimization Phase 2, Requirements Document [1] and Phase 3 Requirements Document [2]. The Phase 2 Requirements document focused on the high-level requirements for the tool. The Phase 3 Requirements document provided more detailed requirements to which the engineering prototype was built in Phase 3. This document will provide detailed requirements for features and enhancements being added to the production pilot in the Phase 3 Sustainment.

78 FR 15009 - Extension of Deadline; Gaining Early Awareness and Readiness for Undergraduate Programs (GEAR UP...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-08

... official version of this document is the document published in the Federal Register. Free Internet access... free, at 1- 800-877-8339. Accessible Format: Individuals with disabilities can obtain this document in... Document Format (PDF). To use PDF, you must have Adobe Acrobat Reader, which is available free at this site...

76 FR 28444 - Agency Information Collection Activities: Form G-884, Extension of a Currently Approved...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-17

... Original Documents; OMB Control No. 1615-0100. The Department of Homeland Security, U.S. Citizenship and...: Request for the Return of Original Documents. (3) Agency form number, if any, and the applicable component... person is eligible to obtain original document(s) contained in an alien file. (5) An estimate of the...

Recommendations for and Documentation of Biological Values for Use in Risk Assessment

EPA Science Inventory

The document was prepared by the Office of Health and Environmental Assessment, Environmental Criteria and Assessment Office, Cincinnati, OH for the Office of Solid Waste and Emergency Response. The document consists of an extensive compliation of values gleaned from published li...

Drinking Water Criteria Document for Ethylene Dibromide (EDB) (Final Draft, 1985)

EPA Science Inventory

The Office of Drinking Water (ODW), U.S. Environmental Protection Agency has prepared a "Drinking Water Criteria Document on Ethylene Dibromide (EDB)". The Criteria Document is an extensive review of the following topics: Physical and chemical properties of ethylene dibromide, to...

Section 4. The GIS Weasel User's Manual

USGS Publications Warehouse

Viger, Roland J.; Leavesley, George H.

2007-01-01

INTRODUCTION The GIS Weasel was designed to aid in the preparation of spatial information for input to lumped and distributed parameter hydrologic or other environmental models. The GIS Weasel provides geographic information system (GIS) tools to help create maps of geographic features relevant to a user's model and to generate parameters from those maps. The operation of the GIS Weasel does not require the user to be a GIS expert, only that the user have an understanding of the spatial information requirements of the environmental simulation model being used. The GIS Weasel software system uses a GIS-based graphical user interface (GUI), the C programming language, and external scripting languages. The software will run on any computing platform where ArcInfo Workstation (version 8.0.2 or later) and the GRID extension are accessible. The user controls the processing of the GIS Weasel by interacting with menus, maps, and tables. The purpose of this document is to describe the operation of the software. This document is not intended to describe the usage of this software in support of any particular environmental simulation model. Such guides are published separately.

78 FR 22918 - Early Career Doctorates Survey; Extension of Public Comment Period; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-17

... NATIONAL SCIENCE FOUNDATION Early Career Doctorates Survey; Extension of Public Comment Period; Correction AGENCY: National Science Foundation. ACTION: Notification of extension of public comment period..., seeking comments on establishing the Early Career Doctorates Survey. The document contained an incorrect...

78 FR 20625 - Extension of Hearing Record Closure Date

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-05

... DEFENSE NUCLEAR FACILITIES SAFETY BOARD Extension of Hearing Record Closure Date AGENCY: Defense Nuclear Facilities Safety Board. ACTION: Extension of hearing record closure date. SUMMARY: The Defense Nuclear Facilities Safety Board (Board) published a document in the Federal Register on January 22, 2013...

77 FR 65871 - Extension of Hearing Record Closure Date

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-31

... DEFENSE NUCLEAR FACILITIES SAFETY BOARD Extension of Hearing Record Closure Date AGENCY: Defense Nuclear Facilities Safety Board. ACTION: Extension of hearing record closure date. SUMMARY: The Defense Nuclear Facilities Safety Board (Board) published a document in the Federal Register on August 15, 2012...

78 FR 1206 - Second Extension of Hearing Record Closure Date

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

... DEFENSE NUCLEAR FACILITIES SAFETY BOARD Second Extension of Hearing Record Closure Date AGENCY: Defense Nuclear Facilities Safety Board. ACTION: Second extension of hearing record closure date. SUMMARY: The Defense Nuclear Facilities Safety Board (Board) published a document in the Federal Register on...

Cooperative Extension Training Impact on Military Youth and 4-H Youth: The Case of Speak Out for Military Kids

ERIC Educational Resources Information Center

Edwin, James; McKinley, Steve; Talbert, B. Allen

2010-01-01

Extension needs new venues to promote their programming skills to unfamiliar audiences. One new audience Extension is currently reaching is military children. By partnering with Operation: Military Kids to offer a Speak Out for Military Kids training, Extension supports military children and document changes in the behavior of this audience.…

Clinical map document based on XML (cMDX): document architecture with mapping feature for reporting and analysing prostate cancer in radical prostatectomy specimens.

PubMed

Eminaga, Okyaz; Hinkelammert, Reemt; Semjonow, Axel; Neumann, Joerg; Abbas, Mahmoud; Koepke, Thomas; Bettendorf, Olaf; Eltze, Elke; Dugas, Martin

2010-11-15

The pathology report of radical prostatectomy specimens plays an important role in clinical decisions and the prognostic evaluation in Prostate Cancer (PCa). The anatomical schema is a helpful tool to document PCa extension for clinical and research purposes. To achieve electronic documentation and analysis, an appropriate documentation model for anatomical schemas is needed. For this purpose we developed cMDX. The document architecture of cMDX was designed according to Open Packaging Conventions by separating the whole data into template data and patient data. Analogue custom XML elements were considered to harmonize the graphical representation (e.g. tumour extension) with the textual data (e.g. histological patterns). The graphical documentation was based on the four-layer visualization model that forms the interaction between different custom XML elements. Sensible personal data were encrypted with a 256-bit cryptographic algorithm to avoid misuse. In order to assess the clinical value, we retrospectively analysed the tumour extension in 255 patients after radical prostatectomy. The pathology report with cMDX can represent pathological findings of the prostate in schematic styles. Such reports can be integrated into the hospital information system. "cMDX" documents can be converted into different data formats like text, graphics and PDF. Supplementary tools like cMDX Editor and an analyser tool were implemented. The graphical analysis of 255 prostatectomy specimens showed that PCa were mostly localized in the peripheral zone (Mean: 73% ± 25). 54% of PCa showed a multifocal growth pattern. cMDX can be used for routine histopathological reporting of radical prostatectomy specimens and provide data for scientific analysis.

Clinical map document based on XML (cMDX): document architecture with mapping feature for reporting and analysing prostate cancer in radical prostatectomy specimens

PubMed Central

2010-01-01

Background The pathology report of radical prostatectomy specimens plays an important role in clinical decisions and the prognostic evaluation in Prostate Cancer (PCa). The anatomical schema is a helpful tool to document PCa extension for clinical and research purposes. To achieve electronic documentation and analysis, an appropriate documentation model for anatomical schemas is needed. For this purpose we developed cMDX. Methods The document architecture of cMDX was designed according to Open Packaging Conventions by separating the whole data into template data and patient data. Analogue custom XML elements were considered to harmonize the graphical representation (e.g. tumour extension) with the textual data (e.g. histological patterns). The graphical documentation was based on the four-layer visualization model that forms the interaction between different custom XML elements. Sensible personal data were encrypted with a 256-bit cryptographic algorithm to avoid misuse. In order to assess the clinical value, we retrospectively analysed the tumour extension in 255 patients after radical prostatectomy. Results The pathology report with cMDX can represent pathological findings of the prostate in schematic styles. Such reports can be integrated into the hospital information system. "cMDX" documents can be converted into different data formats like text, graphics and PDF. Supplementary tools like cMDX Editor and an analyser tool were implemented. The graphical analysis of 255 prostatectomy specimens showed that PCa were mostly localized in the peripheral zone (Mean: 73% ± 25). 54% of PCa showed a multifocal growth pattern. Conclusions cMDX can be used for routine histopathological reporting of radical prostatectomy specimens and provide data for scientific analysis. PMID:21078179

76 FR 4390 - Draft Regulatory Guide: Comment Period Extension and Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-25

....'' This Federal Register notice stated that electronic copies of DG-1229 were available in the NRC's Agencywide Documents Access and Management System (ADAMS) ( http://www.nrc.gov/reading-rm/adams.html ), under... Documents Access and Management System (ADAMS): Publicly available documents created or received at the NRC...

Writing Panels Articulate Extension Public Value in the West

ERIC Educational Resources Information Center

Carroll, Jan. B.; Dinstel, Roxie Rogers; Manton, Linda Marie

2015-01-01

In every era, publicly funded programs seek to document their value. During the centennial celebrations of Cooperative Extension's legislation and establishment, this cry for data became even louder and the demand more intense. The Western Extension Directors Association (WEDA) tasked their Western Region Program Leadership Committee (WRPLC) to…

Collagenous mucosal inflammatory diseases of the gastrointestinal tract.

PubMed

Freeman, Hugh J

2005-07-01

Collagenous mucosal inflammatory diseases involve the columnar-lined gastric and intestinal mucosa and have become recognized increasingly as a significant cause of symptomatic morbidity, particularly in middle-aged and elderly women, especially with watery diarrhea. Still, mechanisms involved in the pathogenesis of this diarrhea remain poorly understood and require further elucidation. The prognosis and long-term outcome of these disorders has been documented only to a limited extent. Recent clinical and pathologic studies have indicated that collagenous mucosal inflammatory disease is a more extensive pathologic process that concomitantly may involve several sites in the gastric and intestinal mucosa. The dominant pathologic lesion is a distinct subepithelial hyaline-like deposit that has histochemical and ultrastructural features of collagen overlying a microscopically defined inflammatory process. An intimate relationship with other autoimmune connective tissue disorders is evident, particularly celiac disease. This is intriguing because these collagenous disorders have not been shown to be gluten dependent. Collagenous mucosal inflammatory disorders may represent a relatively unique but generalized inflammatory response to a multitude of causes, including celiac disease, along with a diverse group of pharmacologic agents. Some recent reports have documented treatment success but histopathologic reversal has been more difficult to substantiate owing to the focal, sometimes extensive nature, of this pathologic process.

An Ontology for State Analysis: Formalizing the Mapping to SysML

NASA Technical Reports Server (NTRS)

Wagner, David A.; Bennett, Matthew B.; Karban, Robert; Rouquette, Nicolas; Jenkins, Steven; Ingham, Michel

2012-01-01

State Analysis is a methodology developed over the last decade for architecting, designing and documenting complex control systems. Although it was originally conceived for designing robotic spacecraft, recent applications include the design of control systems for large ground-based telescopes. The European Southern Observatory (ESO) began a project to design the European Extremely Large Telescope (E-ELT), which will require coordinated control of over a thousand articulated mirror segments. The designers are using State Analysis as a methodology and the Systems Modeling Language (SysML) as a modeling and documentation language in this task. To effectively apply the State Analysis methodology in this context it became necessary to provide ontological definitions of the concepts and relations in State Analysis and greater flexibility through a mapping of State Analysis into a practical extension of SysML. The ontology provides the formal basis for verifying compliance with State Analysis semantics including architectural constraints. The SysML extension provides the practical basis for applying the State Analysis methodology with SysML tools. This paper will discuss the method used to develop these formalisms (the ontology), the formalisms themselves, the mapping to SysML and approach to using these formalisms to specify a control system and enforce architectural constraints in a SysML model.

Ontology for assessment studies of human-computer-interaction in surgery.

PubMed

Machno, Andrej; Jannin, Pierre; Dameron, Olivier; Korb, Werner; Scheuermann, Gerik; Meixensberger, Jürgen

2015-02-01

New technologies improve modern medicine, but may result in unwanted consequences. Some occur due to inadequate human-computer-interactions (HCI). To assess these consequences, an investigation model was developed to facilitate the planning, implementation and documentation of studies for HCI in surgery. The investigation model was formalized in Unified Modeling Language and implemented as an ontology. Four different top-level ontologies were compared: Object-Centered High-level Reference, Basic Formal Ontology, General Formal Ontology (GFO) and Descriptive Ontology for Linguistic and Cognitive Engineering, according to the three major requirements of the investigation model: the domain-specific view, the experimental scenario and the representation of fundamental relations. Furthermore, this article emphasizes the distinction of "information model" and "model of meaning" and shows the advantages of implementing the model in an ontology rather than in a database. The results of the comparison show that GFO fits the defined requirements adequately: the domain-specific view and the fundamental relations can be implemented directly, only the representation of the experimental scenario requires minor extensions. The other candidates require wide-ranging extensions, concerning at least one of the major implementation requirements. Therefore, the GFO was selected to realize an appropriate implementation of the developed investigation model. The ensuing development considered the concrete implementation of further model aspects and entities: sub-domains, space and time, processes, properties, relations and functions. The investigation model and its ontological implementation provide a modular guideline for study planning, implementation and documentation within the area of HCI research in surgery. This guideline helps to navigate through the whole study process in the form of a kind of standard or good clinical practice, based on the involved foundational frameworks. Furthermore, it allows to acquire the structured description of the applied assessment methods within a certain surgical domain and to consider this information for own study design or to perform a comparison of different studies. The investigation model and the corresponding ontology can be used further to create new knowledge bases of HCI assessment in surgery. Copyright © 2014 Elsevier B.V. All rights reserved.

Automated enforcement of traffic signals : a literature review

DOT National Transportation Integrated Search

2001-08-13

This document presents the results of an extensive review of available documents regarding automated enforcement of traffic signal compliance. The literature regarding the operation and impacts of systems that automatically enforce driver compliance ...

TkPl_SU: An Open-source Perl Script Builder for Seismic Unix

NASA Astrophysics Data System (ADS)

Lorenzo, J. M.

2017-12-01

TkPl_SU (beta) is a graphical user interface (GUI) to select parameters for Seismic Unix (SU) modules. Seismic Unix (Stockwell, 1999) is a widely distributed free software package for processing seismic reflection and signal processing. Perl/Tk is a mature, well-documented and free object-oriented graphical user interface for Perl. In a classroom environment, shell scripting of SU modules engages students and helps focus on the theoretical limitations and strengths of signal processing. However, complex interactive processing stages, e.g., selection of optimal stacking velocities, killing bad data traces, or spectral analysis requires advanced flows beyond the scope of introductory classes. In a research setting, special functionality from other free seismic processing software such as SioSeis (UCSD-NSF) can be incorporated readily via an object-oriented style to programming. An object oriented approach is a first step toward efficient extensible programming of multi-step processes, and a simple GUI simplifies parameter selection and decision making. Currently, in TkPl_SU, Perl 5 packages wrap 19 of the most common SU modules that are used in teaching undergraduate and first-year graduate student classes (e.g., filtering, display, velocity analysis and stacking). Perl packages (classes) can advantageously add new functionality around each module and clarify parameter names for easier usage. For example, through the use of methods, packages can isolate the user from repetitive control structures, as well as replace the names of abbreviated parameters with self-describing names. Moose, an extension of the Perl 5 object system, greatly facilitates an object-oriented style. Perl wrappers are self-documenting via Perl programming document markup language.

Towards semantically sensitive text clustering: a feature space modeling technology based on dimension extension.

PubMed

Liu, Yuanchao; Liu, Ming; Wang, Xin

2015-01-01

The objective of text clustering is to divide document collections into clusters based on the similarity between documents. In this paper, an extension-based feature modeling approach towards semantically sensitive text clustering is proposed along with the corresponding feature space construction and similarity computation method. By combining the similarity in traditional feature space and that in extension space, the adverse effects of the complexity and diversity of natural language can be addressed and clustering semantic sensitivity can be improved correspondingly. The generated clusters can be organized using different granularities. The experimental evaluations on well-known clustering algorithms and datasets have verified the effectiveness of our approach.

Additional extensions to the NASCAP computer code, volume 1

NASA Technical Reports Server (NTRS)

Mandell, M. J.; Katz, I.; Stannard, P. R.

1981-01-01

Extensions and revisions to a computer code that comprehensively analyzes problems of spacecraft charging (NASCAP) are documented. Using a fully three dimensional approach, it can accurately predict spacecraft potentials under a variety of conditions. Among the extensions are a multiple electron/ion gun test tank capability, and the ability to model anisotropic and time dependent space environments. Also documented are a greatly extended MATCHG program and the preliminary version of NASCAP/LEO. The interactive MATCHG code was developed into an extremely powerful tool for the study of material-environment interactions. The NASCAP/LEO, a three dimensional code to study current collection under conditions of high voltages and short Debye lengths, was distributed for preliminary testing.

Towards Semantically Sensitive Text Clustering: A Feature Space Modeling Technology Based on Dimension Extension

PubMed Central

Liu, Yuanchao; Liu, Ming; Wang, Xin

2015-01-01

The objective of text clustering is to divide document collections into clusters based on the similarity between documents. In this paper, an extension-based feature modeling approach towards semantically sensitive text clustering is proposed along with the corresponding feature space construction and similarity computation method. By combining the similarity in traditional feature space and that in extension space, the adverse effects of the complexity and diversity of natural language can be addressed and clustering semantic sensitivity can be improved correspondingly. The generated clusters can be organized using different granularities. The experimental evaluations on well-known clustering algorithms and datasets have verified the effectiveness of our approach. PMID:25794172

Specification for the U.S. Geological Survey Historical Topographic Map Collection

USGS Publications Warehouse

Allord, Gregory J.; Walter, Jennifer L.; Fishburn, Kristin A.; Shea, Gale A.

2014-01-01

This document provides the detailed requirements for producing, archiving, and disseminating a comprehensive digital collection of topographic maps for the U.S. Geological Survey (USGS) Historical Topographic Map Collection (HTMC). The HTMC is a digital archive of about 190,000 printed topographic maps published by the USGS from the inception of the topographic mapping program in 1884 until the last paper topographic map using lithographic printing technology was published in 2006. The HTMC provides a comprehensive digital repository of all scales and all editions of USGS printed topographic maps that is easily discovered, browsed, and downloaded by the public at no cost. The HTMC provides ready access to maps that are no longer available for distribution in print. A digital file representing the original paper historical topographic map is produced for each historical map in the HTMC in georeferenced PDF (GeoPDF) format (a portable document format [PDF] with a geospatial extension).

Blasting for abandoned-mine land reclamation (closure of individual subsidence features and erratic, undocumented underground coal-mine workings). Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Workman, J.L.; Thompson, J.

1991-01-01

The study has examined the feasibility of blasting for mitigating various abandoned mine land features on AML sites. The investigation included extensive field trial blasts at sites in North Dakota and Montana. A blasting technique was used that was based on spherical cratering concepts. At the Beulah, North Dakota site thirteen individual vertical openings (sinkholes) were blasted with the intent to fill the voids. The blasts were designed to displace material laterally into the void. Good success was had in filling the sinkholes. At the White site in Montana erratic underground rooms with no available documentation were collapsed. An aditmore » leading into the mine was also blasted. Both individual room blasting and area pattern blasting were studied. A total of eight blasts were fired on the one acre area. Exploration requirements and costs were found to be extensive.« less

Extracting biomedical events from pairs of text entities

PubMed Central

2015-01-01

Background Huge amounts of electronic biomedical documents, such as molecular biology reports or genomic papers are generated daily. Nowadays, these documents are mainly available in the form of unstructured free texts, which require heavy processing for their registration into organized databases. This organization is instrumental for information retrieval, enabling to answer the advanced queries of researchers and practitioners in biology, medicine, and related fields. Hence, the massive data flow calls for efficient automatic methods of text-mining that extract high-level information, such as biomedical events, from biomedical text. The usual computational tools of Natural Language Processing cannot be readily applied to extract these biomedical events, due to the peculiarities of the domain. Indeed, biomedical documents contain highly domain-specific jargon and syntax. These documents also describe distinctive dependencies, making text-mining in molecular biology a specific discipline. Results We address biomedical event extraction as the classification of pairs of text entities into the classes corresponding to event types. The candidate pairs of text entities are recursively provided to a multiclass classifier relying on Support Vector Machines. This recursive process extracts events involving other events as arguments. Compared to joint models based on Markov Random Fields, our model simplifies inference and hence requires shorter training and prediction times along with lower memory capacity. Compared to usual pipeline approaches, our model passes over a complex intermediate problem, while making a more extensive usage of sophisticated joint features between text entities. Our method focuses on the core event extraction of the Genia task of BioNLP challenges yielding the best result reported so far on the 2013 edition. PMID:26201478

Polar Domain Discovery with Sparkler

NASA Astrophysics Data System (ADS)

Duerr, R.; Khalsa, S. J. S.; Mattmann, C. A.; Ottilingam, N. K.; Singh, K.; Lopez, L. A.

2017-12-01

The scientific web is vast and ever growing. It encompasses millions of textual, scientific and multimedia documents describing research in a multitude of scientific streams. Most of these documents are hidden behind forms which require user action to retrieve and thus can't be directly accessed by content crawlers. These documents are hosted on web servers across the world, most often on outdated hardware and network infrastructure. Hence it is difficult and time-consuming to aggregate documents from the scientific web, especially those relevant to a specific domain. Thus generating meaningful domain-specific insights is currently difficult. We present an automated discovery system (Figure 1) using Sparkler, an open-source, extensible, horizontally scalable crawler which facilitates high throughput and focused crawling of documents pertinent to a particular domain such as information about polar regions. With this set of highly domain relevant documents, we show that it is possible to answer analytical questions about that domain. Our domain discovery algorithm leverages prior domain knowledge to reach out to commercial/scientific search engines to generate seed URLs. Subject matter experts then annotate these seed URLs manually on a scale from highly relevant to irrelevant. We leverage this annotated dataset to train a machine learning model which predicts the `domain relevance' of a given document. We extend Sparkler with this model to focus crawling on documents relevant to that domain. Sparkler avoids disruption of service by 1) partitioning URLs by hostname such that every node gets a different host to crawl and by 2) inserting delays between subsequent requests. With an NSF-funded supercomputer Wrangler, we scaled our domain discovery pipeline to crawl about 200k polar specific documents from the scientific web, within a day.

Quantitative Technique for Comparing Simulant Materials through Figures of Merit

NASA Technical Reports Server (NTRS)

Rickman, Doug; Hoelzer, Hans; Fourroux, Kathy; Owens, Charles; McLemore, Carole; Fikes, John

2007-01-01

The 1989 workshop report entitled Workshop on Production and Uses of Simulated Lunar Materials and the Lunar Regolith Simulant Materials: Recommendations for Standardization, Production, and Usage, NASA Technical Publication both identified and reinforced a need for a set of standards and requirements for the production and usage of the Lunar simulant materials. As NASA prepares to return to the Moon, and set out to Mars, a set of early requirements have been developed for simulant materials and the initial methods to produce and measure those simulants have been defined. Addressed in the requirements document are: 1) a method for evaluating the quality of any simulant of a regolith, 2) the minimum characteristics for simulants of Lunar regolith, and 3) a method to produce simulants needed for NASA's Exploration mission. As an extension of the requirements document a method to evaluate new and current simulants has been rigorously defined through the mathematics of Figures of Merit (FoM). Requirements and techniques have been developed that allow the simulant provider to compare their product to a standard reference material through Figures of Merit. Standard reference material may be physical material such as the Apollo core samples or material properties predicted for any landing site. The simulant provider is not restricted to providing a single "high fidelity" simulant, which may be costly to produce. The provider can now develop "lower fidelity" simulants for engineering applications such as drilling and mobility applications.

Using the World-Wide Web to Facilitate Communications of Non-Destructive Evaluation

NASA Technical Reports Server (NTRS)

McBurney, Sean

1995-01-01

The high reliability required for Aeronautical components is a major reason for extensive Nondestructive Testing and Evaluation. Here at Langley Research Center (LaRC), there are highly trained and certified personal to conduct such testing to prevent hazards from occurring in the workplace and on the research projects for the National Aeronautics and Space Administration (NASA). The purpose of my studies was to develop a communication source to educate others of the services and equipment offered here. This was accomplished by creating documents that are accessible to all in the industry via the World Wide Web.

An Electron/Photon/Relaxation Data Library for MCNP6

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hughes, III, H. Grady

The capabilities of the MCNP6 Monte Carlo code in simulation of electron transport, photon transport, and atomic relaxation have recently been significantly expanded. The enhancements include not only the extension of existing data and methods to lower energies, but also the introduction of new categories of data and methods. Support of these new capabilities has required major additions to and redesign of the associated data tables. In this paper we present the first complete documentation of the contents and format of the new electron-photon-relaxation data library now available with the initial production release of MCNP6.

A Case Study in Organizational Change: Evaluation in Cooperative Extension

ERIC Educational Resources Information Center

Rennekamp, Roger A.; Engle, Molly

2008-01-01

This chapter examines how factors both internal and external to Cooperative Extension have influenced its commitment and capability to assess the quality and impact of its programs. The authors begin by documenting how the nature of Extension programming has changed dramatically in response to societal needs over the course of the organization's…

14 CFR 13.213 - Extension of time.

Code of Federal Regulations, 2011 CFR

2011-01-01

... serve a copy of the motion on each party. The administrative law judge may grant the extension of time... document under this subpart. If the parties agree, the administrative law judge shall grant one extension... administrative law judge to be signed by the administrative law judge and filed with the hearing docket clerk...

14 CFR 13.213 - Extension of time.

Code of Federal Regulations, 2013 CFR

2013-01-01

... serve a copy of the motion on each party. The administrative law judge may grant the extension of time... document under this subpart. If the parties agree, the administrative law judge shall grant one extension... administrative law judge to be signed by the administrative law judge and filed with the hearing docket clerk...

14 CFR 13.213 - Extension of time.

Code of Federal Regulations, 2014 CFR

2014-01-01

... serve a copy of the motion on each party. The administrative law judge may grant the extension of time... document under this subpart. If the parties agree, the administrative law judge shall grant one extension... administrative law judge to be signed by the administrative law judge and filed with the hearing docket clerk...

14 CFR 13.213 - Extension of time.

Code of Federal Regulations, 2012 CFR

2012-01-01

... serve a copy of the motion on each party. The administrative law judge may grant the extension of time... document under this subpart. If the parties agree, the administrative law judge shall grant one extension... administrative law judge to be signed by the administrative law judge and filed with the hearing docket clerk...

Support Documents for EPA’s Second Review of Existing Drinking Water Standards

EPA Pesticide Factsheets

The support documents for the Six-Year Review 2 of existing National Primary Drinking Water Standards contain extensive information including protocol for the review, and chemical contaminant health effects among others

Support Documents for EPA’s Third Review of Existing Drinking Water Standards

EPA Pesticide Factsheets

The support documents for the Six-Year Review 3 of existing National Primary Drinking Water Standards contain extensive information including protocol for the review, and chemical contaminant health effects among others

Secondary Containment Design for the LLNL B801 Diala Oil Tank

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mertesdorf, E.

2016-12-14

Design is to add an extension to the secondary containment of tank T1-A3 at building 801. Piping from the inner tank penetrates the secondary containment tank below the liquid level of the primary tank. To meet Oil Pollution Prevention Regulation 40 CFR 120.7 the single wall piping needs to be provided with secondary containment. Steel Tank Institute (STI) conference publication states: §112.3(d)(1)(iii) –SPCC Plan requirements- Systems shall be designed in accordance with good engineering practice, including consideration of applicable industry standards and that procedures for required inspections and testing have been established. Section 112.7(a)(2) allows for deviations from specific rulemore » requirements, provided the Owner/operator responsible to select, document and implement alternate measure and a PE certifies the SPCC Plan in accordance with good engineering practices, including consideration of industry standards« less

The Logistics Of Installing Pacs In An Existing Medical Center

NASA Astrophysics Data System (ADS)

Saarinen, Allan O.; Goodsitt, Mitchell M.; Loop, John W.

1989-05-01

A largely overlooked issue in the Picture Archiving and Communication Systems (PACS) area is the tremendous amount of site planning activity required to install such a system in an existing medical center. Present PACS equipment requires significant hospital real estate, specialized electrical power, cabling, and environmental controls to operate properly. Marshaling the hospital resources necessary to install PACS equipment requires many different players. The site preparation costs are nontrivial and usually include a number of hidden expenses. This paper summarizes the experience of the University of Washington Department of Radiology in installing an extensive digital imaging network (DIN) and PACS throughout the Department and several clinics in the hospital. The major logistical problems encountered at the University are discussed, a few recommendations are made, and the installation costs are documented. Overall, the University's site preparation costs equalled about seven percent (7%) of the total PACS equipment expenditure at the site.

EXTENSION EDUCATION SYMPOSIUM: Getting the most out of your extension appointment and still having a life.

PubMed

Powers, W; Cockett, N; Lardy, G

2017-04-01

Managing the demands of an academic appointment in extension can be a challenging task. Demands from constituent groups, expectations of supervisors, and rigors of promotion and tenure processes can create pressures that young faculty did not expect. Throw in spousal and family duties and you have created a situation that many will find hard to navigate. However, there are ways to cope and, even better news, there are ways to excel in meeting the demands of an academic appointment and enjoying life. Because many new extension faculty members do not have prior experience in extension, best practices in documenting programs and extension scholarship over the pretenure period are provided in this paper. Appointments that include both research and extension are quite common at many land grant universities. The advantages of joint appointments are numerous and include the fact that more and more grant agencies are seeking integrated research, teaching, and/or extension projects. However, the time demands of joint appointments can be challenging. Joint appointments can be designed to help faculty members conduct important translational research and have it be applied in a production setting. By seeking commonalities in research and extension efforts, joint appointments can be very synergistic. Development of highly successful programs requires planning on the front end with an emphasis on an in-depth needs assessment to determine stakeholder needs for both research and extension. Impact assessment should be part of this planning effort. Performing as a successful extension faculty member while maintaining relationships outside of work is challenging and requires deliberate effort on the part of employees and supervisors to realize there is more to life than work. Some authors have referred to this as work-life balance, but it may be more helpful to think of it as work-life effectiveness. To do this, one needs to 1) define what success looks like, 2) set boundaries and maintain control including control of your schedule, and 3) find time to ensure your physical, emotional, and spiritual well-being are nurtured in addition to your professional development. In summary, extension careers can be challenging at times as demands and expectations of stakeholders, supervisors, and rigors of the tenure system create formidable obstacles. However, by keeping a focus on the priorities of the position and looking for synergy in research and extension work, they can actually be quite enjoyable and very rewarding.

Photography equipment and techniques. A survey of NASA developments

NASA Technical Reports Server (NTRS)

Derr, A. J.

1972-01-01

The Apollo program has been the most complex exploration ever attempted by man, requiring extensive research, development, and engineering in most of the sciences before the leap through space could begin. Photography has been used at each step of the way to document the efforts and activities, isolate mistakes, reveal new phenomena, and to record much that cannot be seen by the human eye. At the same time, the capabilities of photography were extended because of the need of meeting space requirements. The results of this work have been applied to community planning and ecology, for example, as well as to space and engineering. Special uses of standard equipment, modifications and new designs, as well as film combinations that indicate actual or potential ecological problems are described.

CIDOC-CRM extensions for conservation processes: A methodological approach

NASA Astrophysics Data System (ADS)

Vassilakaki, Evgenia; Zervos, Spiros; Giannakopoulos, Georgios

2015-02-01

This paper aims to report the steps taken to create the CIDOC Conceptual Reference Model (CIDOC-CRM) extensions and the relationships established to accommodate the depiction of conservation processes. In particular, the specific steps undertaken for developing and applying the CIDOC-CRM extensions for defining the conservation interventions performed on the cultural artifacts of the National Archaeological Museum of Athens, Greece are presented in detail. A report on the preliminary design of the DOC-CULTURE project (Development of an integrated information environment for assessment and documentation of conservation interventions to cultural works/objects with nondestructive testing techniques [NDTs], www.ndt-lab.gr/docculture), co-financed by the European Union NSRF THALES program, can be found in Kyriaki-Manessi, Zervos & Giannakopoulos (1) whereas the NDT&E methods and their output data through CIDOC-CRM extension of the DOC-CULTURE project approach to standardize the documentation of the conservation were further reported in Kouis et al. (2).

Extension of Interim Approvals of Operating Permits Programs

EPA Pesticide Factsheets

This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Helping Hands; Giving Volunteer Leaders a Place in the Extension Program.

ERIC Educational Resources Information Center

Strow, Helen A.

The document is a guide for extension workers, to aid them in identifying and training local volunteer leaders, thereby adding a broader dimension to the extension worker's efforts and enabling him to increase by many times the number of families he is able to reach. Leadership is defined, the importance of leaders explained, and methods for…

Strategies for Accommodating Extension Clients Who Face Language, Vision, or Hearing Challenges

ERIC Educational Resources Information Center

Angima, Sam; Etuk, Lena; Maddy, Deborah

2016-01-01

Extension services nationwide seek to equalize access to university resources for all learners. In this article, we focus on accommodation as a tool of our trade. We discuss findings and implications from a study that documented approaches used by one state's Extension professionals to accommodate clients who face language, vision, or hearing…

Improving the Plasticity of LIMS Implementation: LIMS Extension through Microsoft Excel

NASA Technical Reports Server (NTRS)

Culver, Mark

2017-01-01

A Laboratory Information Management System (LIMS) is a databasing software with many built-in tools ideal for handling and documenting most laboratory processes in an accurate and consistent manner, making it an indispensable tool for the modern laboratory. However, a lot of LIMS end users will find that in the performance of analyses that have unique considerations such as standard curves, multiple stages incubations, or logical considerations, a base LIMS distribution may not ideally suit their needs. These considerations bring about the need for extension languages, which can extend the functionality of a LIMS. While these languages do provide the implementation team the functionality required to accommodate these special laboratory analyses, they are usually too complex for the end user to modify to compensate for natural changes in laboratory operations. The LIMS utilized by our laboratory offers a unique and easy-to-use choice for an extension language, one that is already heavily relied upon not only in science but also in most academic and business pursuits: Microsoft Excel. The validity of Microsoft Excel as a pseudo programming language and its usability and versatility as a LIMS extension language will be discussed. The NELAC implications and overall drawbacks of this LIMS configuration will also be discussed.

Information Pre-Processing using Domain Meta-Ontology and Rule Learning System

NASA Astrophysics Data System (ADS)

Ranganathan, Girish R.; Biletskiy, Yevgen

Around the globe, extraordinary amounts of documents are being created by Enterprises and by users outside these Enterprises. The documents created in the Enterprises constitute the main focus of the present chapter. These documents are used to perform numerous amounts of machine processing. While using thesedocuments for machine processing, lack of semantics of the information in these documents may cause misinterpretation of the information, thereby inhibiting the productiveness of computer assisted analytical work. Hence, it would be profitable to the Enterprises if they use well defined domain ontologies which will serve as rich source(s) of semantics for the information in the documents. These domain ontologies can be created manually, semi-automatically or fully automatically. The focus of this chapter is to propose an intermediate solution which will enable relatively easy creation of these domain ontologies. The process of extracting and capturing domain ontologies from these voluminous documents requires extensive involvement of domain experts and application of methods of ontology learning that are substantially labor intensive; therefore, some intermediate solutions which would assist in capturing domain ontologies must be developed. This chapter proposes a solution in this direction which involves building a meta-ontology that will serve as an intermediate information source for the main domain ontology. This chapter proposes a solution in this direction which involves building a meta-ontology as a rapid approach in conceptualizing a domain of interest from huge amount of source documents. This meta-ontology can be populated by ontological concepts, attributes and relations from documents, and then refined in order to form better domain ontology either through automatic ontology learning methods or some other relevant ontology building approach.

Ultraviolet Free Electron Laser Facility preliminary design report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ben-Zvi, I.

1993-02-01

This document, the Preliminary Design Report (PDR) for the Brookhaven Ultraviolet Free Electron Laser (UV FEL) facility, describes all the elements of a facility proposed to meet the needs of a research community which requires ultraviolet sources not currently available as laboratory based lasers. Further, for these experiments, the requisite properties are not extant in either the existing second or upcoming third generation synchrotron light sources. This document is the result of our effort at BNL to identify potential users, determine the requirements of their experiments, and to design a facility which can not only satisfy the existing need, butmore » have adequate flexibility for possible future extensions as need dictates and as evolving technology allows. The PDR is comprised of three volumes. In this, the first volume, background for the development of the proposal is given, including descriptions of the UV FEL facility, and representative examples of the science it was designed to perform. Discussion of the limitations and potential directions for growth are also included. A detailed description of the facility design is then provided, which addresses the accelerator, optical, and experimental systems. Information regarding the conventional construction for the facility is contained in an addendum to volume one (IA).« less

Study to document low thrust trajectory optimization programs HILTOP and ASTOP

NASA Technical Reports Server (NTRS)

Horsewood, J. L.; Mann, F. I.; Pines, S.

1974-01-01

Detailed documentation of the HILTOP and ASTOP computer programs is presented along with results of the analyses of the possible extension of the HILTOP program and results of an extra-ecliptic mission study performed with HILTOP.

Designing for human presence in space: An introduction to environmental control and life support systems

NASA Technical Reports Server (NTRS)

Wieland, Paul

1994-01-01

Human exploration and utilization of space requires habitats to provide appropriate conditions for working and living. These conditions are provided by environmental control and life support systems (ECLSS) that ensure appropriate atmosphere composition, pressure, and temperature; manage and distribute water, process waste matter, provide fire detection and suppression; and other functions as necessary. The functions that are performed by ECLSS are described and basic information necessary to design an ECLSS is provided. Technical and programmatic aspects of designing and developing ECLSS for space habitats are described including descriptions of technologies, analysis methods, test requirements, program organization, documentation requirements, and the requirements imposed by medical, mission, safety, and system needs. The design and development process is described from initial trade studies through system-level analyses to support operation. ECLSS needs for future space habitats are also described. Extensive listings of references and related works provide sources for more detailed information on each aspect of ECLSS design and development.

Using a formal requirements management tool for system engineering: first results at ESO

NASA Astrophysics Data System (ADS)

Zamparelli, Michele

2006-06-01

The attention to proper requirement analysis and maintenance is growing in modern astronomical undertakings. The increasing degree of complexity that current and future generations of projects have reached requires substantial system engineering efforts and the usage of all available technology to keep project development under control. One such technology is a tool which helps managing relationships between deliverables at various development stages, and across functional subsystems and disciplines as different as software, mechanics, optics and electronics. The immediate benefits are traceability and the possibility to do impact analysis. An industrially proven tool for requirements management is presented together with the first results across some projects at ESO and a cost/benefit analysis of its usage. Experience gathered so far shows that the extensibility and configurability of the tool from one hand, and integration with common documentation formats and standards on the other, make it appear as a promising solution for even small scale system development.

Automated space processing payloads study. Volume 2, book 1: Technical report. [instrument packages and space shuttles

NASA Technical Reports Server (NTRS)

1975-01-01

The extent was investigated to which experiment hardware and operational requirements can be met by automatic control and material handling devices; payload and system concepts that make extensive use of automation technology are defined. Hardware requirements for each experiment were established and tabulated, and investigations of applicable existing hardware were documented. The capabilities and characteristics of industrial automation equipment, controls, and techniques are presented in the form of a summary of applicable equipment characteristics in three basic mutually-supporting formats. Facilities for performing groups of experiments are defined along with four levitation groups and three furnace groups; major hardware elements required to implement them were identified. A conceptual design definition of ten different automated processing facilities is presented along with the specific equipment to implement each facility and the design layouts of the different units. Constraints and packaging, weight, and power requirements for six payloads postulated for shuttle missions in the 1979 to 1982 time period were examined.

Tank waste remediation system functions and requirements document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carpenter, K.E

1996-10-03

This is the Tank Waste Remediation System (TWRS) Functions and Requirements Document derived from the TWRS Technical Baseline. The document consists of several text sections that provide the purpose, scope, background information, and an explanation of how this document assists the application of Systems Engineering to the TWRS. The primary functions identified in the TWRS Functions and Requirements Document are identified in Figure 4.1 (Section 4.0) Currently, this document is part of the overall effort to develop the TWRS Functional Requirements Baseline, and contains the functions and requirements needed to properly define the top three TWRS function levels. TWRS Technicalmore » Baseline information (RDD-100 database) included in the appendices of the attached document contain the TWRS functions, requirements, and architecture necessary to define the TWRS Functional Requirements Baseline. Document organization and user directions are provided in the introductory text. This document will continue to be modified during the TWRS life-cycle.« less

20 CFR 655.167 - Document retention requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Document retention requirements. 655.167... retention requirements. (a) Entities required to retain documents. All employers filing an Application for... retain the documents and records proving compliance with this subpart. (b) Period of required retention...

77 FR 45479 - Extension of Import Restrictions on Archaeological Objects and Ecclesiastical and Ritual...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-01

... restrictions has been revised. The Designated List and the regulatory text in that document contain language which is inadvertently not consistent with the rest of the document as to the historical period that the...

Pedestrian safety impacts of curb extensions : a case study : final report.

DOT National Transportation Integrated Search

2005-07-01

This report documents a case study evaluating motorist yielding behavior at a crosswalk in Albany, Oregon. In 2003 the City of Albany installed curb extensions, continental markings and advance stop bars at several uncontrolled intersections along th...

24 CFR 5.502 - Requirements concerning documents.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Requirements concerning documents... § 5.502 Requirements concerning documents. For any notice or document (decision, declaration, consent... regulations for requirements concerning communications with persons with disabilities.) ...

Trends Affecting Ohio State University Extension in the 21st Century and the Implications for Human Capital

ERIC Educational Resources Information Center

Cochran, Graham R.; Ferrari, Theresa M.; Chen, Claire Yueh-Ti

2012-01-01

Research with a diverse array of organizations in the public and private sectors has documented a common set of trends affecting organizations and their human capital in the 21st century. Similar trends have been identified as important for Extension organizations and the Cooperative Extension System. It is important to determine if such trends…

Effects of including surface depressions in the application of the Precipitation-Runoff Modeling System in the Upper Flint River Basin, Georgia

USGS Publications Warehouse

Viger, Roland J.; Hay, Lauren E.; Jones, John W.; Buell, Gary R.

2010-01-01

This report documents an extension of the Precipitation Runoff Modeling System that accounts for the effect of a large number of water-holding depressions in the land surface on the hydrologic response of a basin. Several techniques for developing the inputs needed by this extension also are presented. These techniques include the delineation of the surface depressions, the generation of volume estimates for the surface depressions, and the derivation of model parameters required to describe these surface depressions. This extension is valuable for applications in basins where surface depressions are too small or numerous to conveniently model as discrete spatial units, but where the aggregated storage capacity of these units is large enough to have a substantial effect on streamflow. In addition, this report documents several new model concepts that were evaluated in conjunction with the depression storage functionality, including: ?hydrologically effective? imperviousness, rates of hydraulic conductivity, and daily streamflow routing. All of these techniques are demonstrated as part of an application in the Upper Flint River Basin, Georgia. Simulated solar radiation, potential evapotranspiration, and water balances match observations well, with small errors for the first two simulated data in June and August because of differences in temperatures from the calibration and evaluation periods for those months. Daily runoff simulations show increasing accuracy with streamflow and a good fit overall. Including surface depression storage in the model has the effect of decreasing daily streamflow for all but the lowest flow values. The report discusses the choices and resultant effects involved in delineating and parameterizing these features. The remaining enhancements to the model and its application provide a more realistic description of basin geography and hydrology that serve to constrain the calibration process to more physically realistic parameter values.

Revolution in Field Science: Apollo Approach to Inaccessible Surface Exploration

NASA Astrophysics Data System (ADS)

Clark, P. E.

2010-07-01

The extraordinary challenge mission designers, scientists, and engineers, faced in planning the first human expeditions to the surface of another solar system body led to the development of a distinctive and even revolutionary approach to field work. Not only were those involved required to deal effectively with the extreme limitation in resources available for and access to a target as remote as the lunar surface; they were required to developed a rigorous approach to science activities ranging from geological field work to deploying field instruments. Principal aspects and keys to the success of the field work are discussed here, including the highly integrated, intensive, and lengthy science planning, simulation, and astronaut training; the development of a systematic scheme for description and documentation of geological sites and samples; and a flexible yet disciplined methodology for site documentation and sample collection. The capability for constant communication with a ‘backroom’ of geological experts who make requests and weigh in on surface operations was innovative and very useful in encouraging rapid dissemination of information to the greater community in general. An extensive archive of the Apollo era science activity related documents provides evidence of the principal aspects and keys to the success of the field work. The Apollo Surface Journal allows analysis of the astronaut’s performance in terms of capability for traveling on foot, documentation and sampling of field stations, and manual operation of tools and instruments, all as a function of time. The application of these analysis as ‘lessons learned’ for planning the next generation of human or robotic field science activities on the Moon and elsewhere are considered here as well.

[Initial and extension applications for psychodynamic therapy according to the German Guidelines for Psychotherapy].

PubMed

Lieberz, Klaus; Krumm, Bertram; Adamek, Lucie; Mühlig, Stephan

2010-01-01

According to the German Guidelines for Psychotherapy, psychotherapists need the consent of the respective insurance company to commence outpatient therapy. They have two options: (1) To begin a so-called short-term therapy (KZT) for up to 25 sessions--a quick and easy procedure requiring few formal expenses. Afterwards the therapist must provide the reasons for extending the therapy in a formal expert assessment request (extension request). (2) It is also possible to obtain the consent of the insurance company at the beginning of therapy (initial request) for up to 50 sessions (psychodynamic long-term therapy) or even for up to 160 sessions (analytical psychotherapy), both of which require the same expert assessment to be filled out beforehand (LZT). This study examines the initial and extension requests submitted for evaluation for psychodynamic therapies according to the German Guidelines for Psychotherapy. The question is posed as to what influences are important in the selection of therapists for these two types of request. In the context of the MARS study, we evaluated a total of 362 randomly chosen requests submitted between May 2007 and June 2008, 128 of which were initial requests and 234 of which were requests for an extension. The evaluation of the reports proceeded on the basis of a previously developed documentation system with various modules comprising information on the sociodemographics and morbidity of the patients as well as information on the therapists themselves. Further modules are assessed in this review. There were many more requests for an extension submitted than initial requests. Initial requests were preferably made when planning analytical psychotherapy. Patients for whom initial requests were submitted were also distinctly younger. The morbidity of the patients had no noticeable influence on the choice of procedure. In particular, diagnoses that could require crisis intervention were not more common in the requests for an extension than in the initial requests. Variables among the therapists had no influence on the form of procedure. These results were confirmed by a multivariate statistical analysis. The inconsistencies found in the reported and encoded morbidity of the patients confirm earlier results. Basic conditions, like the guidelines themselves or the payment of trial treatment, seem to determine therapists' behaviour. We also discuss whether or not the advantages of the current procedures to both the patient and the therapist outweigh the possible disadvantages..

An electronic specimen collection protocol schema (eSCPS). Document architecture for specimen management and the exchange of specimen collection protocols between biobanking information systems.

PubMed

Eminaga, O; Semjonow, A; Oezguer, E; Herden, J; Akbarov, I; Tok, A; Engelmann, U; Wille, S

2014-01-01

The integrity of collection protocols in biobanking is essential for a high-quality sample preparation process. However, there is not currently a well-defined universal method for integrating collection protocols in the biobanking information system (BIMS). Therefore, an electronic schema of the collection protocol that is based on Extensible Markup Language (XML) is required to maintain the integrity and enable the exchange of collection protocols. The development and implementation of an electronic specimen collection protocol schema (eSCPS) was performed at two institutions (Muenster and Cologne) in three stages. First, we analyzed the infrastructure that was already established at both the biorepository and the hospital information systems of these institutions and determined the requirements for the sufficient preparation of specimens and documentation. Second, we designed an eSCPS according to these requirements. Finally, a prospective study was conducted to implement and evaluate the novel schema in the current BIMS. We designed an eSCPS that provides all of the relevant information about collection protocols. Ten electronic collection protocols were generated using the supplementary Protocol Editor tool, and these protocols were successfully implemented in the existing BIMS. Moreover, an electronic list of collection protocols for the current studies being performed at each institution was included, new collection protocols were added, and the existing protocols were redesigned to be modifiable. The documentation time was significantly reduced after implementing the eSCPS (5 ± 2 min vs. 7 ± 3 min; p = 0.0002). The eSCPS improves the integrity and facilitates the exchange of specimen collection protocols in the existing open-source BIMS.

Second Extension of January 25, 1995 Potential to Emit

EPA Pesticide Factsheets

This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Extension of January 25, 1995 Potential to Emit Transition Policy

EPA Pesticide Factsheets

This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Third Extension of January 25, 1995 Potential to Emit Transition Policy

EPA Pesticide Factsheets

This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Automatic system for computer program documentation

NASA Technical Reports Server (NTRS)

Simmons, D. B.; Elliott, R. W.; Arseven, S.; Colunga, D.

1972-01-01

Work done on a project to design an automatic system for computer program documentation aids was made to determine what existing programs could be used effectively to document computer programs. Results of the study are included in the form of an extensive bibliography and working papers on appropriate operating systems, text editors, program editors, data structures, standards, decision tables, flowchart systems, and proprietary documentation aids. The preliminary design for an automated documentation system is also included. An actual program has been documented in detail to demonstrate the types of output that can be produced by the proposed system.

Performance documentation of the engineering model 30-cm diameter thruster

NASA Technical Reports Server (NTRS)

Bechtel, R. T.; Rawlin, V. K.

1976-01-01

The results of extensive testing of two 30-cm ion thrusters which are virtually identical to the 900 series Engineering Model Thruster in an ongoing 15,000-hour life test are presented. Performance data for the nominal fullpower (2650 W) operating point; performance sensitivities to discharge voltage, discharge losses, accelerator voltage, and magnetic baffle current; and several power throttling techniques (maximum Isp, maximum thrust/power ratio, and two cases in between are included). Criteria for throttling are specified in terms of the screen power supply envelope, thruster operating limits, and control stability. In addition, reduced requirements for successful high voltage recycles are presented.

76 FR 26750 - Agency Information Collection Activities: Documentation Requirements for Articles Entered Under...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-09

... Activities: Documentation Requirements for Articles Entered Under Various Special Tariff Treatment Provisions...: Documentation Requirements for Articles Entered Under Various Special Tariff Treatment Provisions. This request... collection: Title: Documentation Requirements for Articles Entered Under Various Special Tariff Treatment...

76 FR 39416 - Agency Information Collection Activities: Documentation Requirements for Articles Entered Under...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-06

... Activities: Documentation Requirements for Articles Entered Under Various Special Tariff Treatment Provisions... accordance with the Paperwork Reduction Act: Documentation Requirements for Articles Entered Under Various... techniques or other forms of information. Title: Documentation Requirements for Articles Entered Under...

5 CFR 1315.9 - Required documentation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Required documentation. 1315.9 Section 1315.9 Administrative Personnel OFFICE OF MANAGEMENT AND BUDGET OMB DIRECTIVES PROMPT PAYMENT § 1315.9 Required documentation. Agencies are required to ensure the following payment documentation is established...

Postsecondary Peer Cooperative Learning Programs: Annotated Bibliography 2017

ERIC Educational Resources Information Center

Arendale, David R., Comp.

2017-01-01

This 2017 annotated bibliography reviews seven postsecondary peer cooperative learning programs that have been implemented nationally to increase student achievement. An extensive literature search was conducted of published journal articles, newspaper accounts, book chapters, books, ERIC documents, thesis and dissertations, online documents, and…

Nutrient Control Design Manual–State of the Technology Review Report

EPA Science Inventory

This EPA document is an interim product in the development of revised design guidance for nitrogen and phosphorus control at municipal WWTPs. This document presents findings from an extensive review of nitrogen and phosphorus control technologies and techniques currently applied...

Interdisciplinary Coordination Reviews: A Process to Reduce Construction Costs.

ERIC Educational Resources Information Center

Fewell, Dennis A.

1998-01-01

Interdisciplinary Coordination design review is instrumental in detecting coordination errors and omissions in construction documents. Cleansing construction documents of interdisciplinary coordination errors reduces time extensions, the largest source of change orders, and limits exposure to liability claims. Improving the quality of design…

Effects of red, far-red and blue light in maintaining growth in latitudinal populations of Norway spruce (Picea abies).

PubMed

Mølmann, Jørgen Alexander; Junttila, Olavi; Johnsen, Oystein; Olsen, Jorunn Elisabeth

2006-02-01

Seedlings of trees with a free growth pattern cease growth when night-lengths become shorter than a critical value, and this critical night-length (CNL) decreases with increasing latitude of origin. In northern populations, the light quality also appears to play an important role and a clinal variation in requirement for far-red (FR) light has been documented. In this study we dissected the light quality requirements for maintaining growth in different latitudinal populations of Norway spruce (Picea abies (L.) H. Karst.) using light emitting diodes for red (R), FR and blue (B) light, as 12 h day extension to provide 24 h photoperiod. At equal spectral photon flux, FR light was more effective than R light in maintaining growth, and the requirement of both R and FR increased with northern latitude of origin. One-to-one mixtures of R and FR light were more effective in maintaining growth than either FR or R light alone, indicating a possible interaction between R and FR light maintaining growth. Using the blue light as day extension could not prevent growth cessation in any of the populations, but delayed the bud set slightly in all populations. Our results suggest that phytochrome(s) are the primary photoreceptors in high irradiance responses maintaining growth in Norway spruce seedlings.

"The Wonder Years" of XML.

ERIC Educational Resources Information Center

Gazan, Rich

2000-01-01

Surveys the current state of Extensible Markup Language (XML), a metalanguage for creating structured documents that describe their own content, and its implications for information professionals. Predicts that XML will become the common language underlying Web, word processing, and database formats. Also discusses Extensible Stylesheet Language…

78 FR 16502 - Emergency Access Advisory Committee; Announcement of Charter Extension

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-15

... FEDERAL COMMUNICATIONS COMMISSION [DA 13-28 and DA 13-331] Emergency Access Advisory Committee; Announcement of Charter Extension AGENCY: Federal Communications Commission. ACTION: Notice; correction. SUMMARY: In this document, the Federal Communication Commission (FCC) is correcting a notice that appeared...

Inclusion of service robots in the daily lives of frail older users: A step-by-step definition procedure on users' requirements.

PubMed

García-Soler, Álvaro; Facal, David; Díaz-Orueta, Unai; Pigini, Lucia; Blasi, Lorenzo; Qiu, Renxi

2018-01-01

The implications for the inclusion of robots in the daily lives of frail older adults, especially in relation to these population needs, have not been extensively studied. The "Multi-Role Shadow Robotic System for Independent Living" (SRS) project has developed a remotely-controlled, semi-autonomous robotic system to be used in domestic environments. The objective of this paper is to document the iterative procedure used to identify, select and prioritize user requirements. Seventy-four requirements were identified by means of focus groups, individual interviews and scenario-based interviews. The list of user requirements, ordered according to impact, number and transnational criteria, revealed a high number of requirements related to basic and instrumental activities of daily living, cognitive and social support and monitorization, and also involving privacy, safety and adaptation issues. Analysing and understanding older users' perceptions and needs when interacting with technological devices adds value to assistive technology and ensures that the systems address currently unmet needs. Copyright © 2017 Elsevier B.V. All rights reserved.

SLS-SPEC-159 Cross-Program Design Specification for Natural Environments (DSNE) Revision E

NASA Technical Reports Server (NTRS)

Roberts, Barry C.

2017-01-01

The DSNE completes environment-related specifications for architecture, system-level, and lower-tier documents by specifying the ranges of environmental conditions that must be accounted for by NASA ESD Programs. To assure clarity and consistency, and to prevent requirements documents from becoming cluttered with extensive amounts of technical material, natural environment specifications have been compiled into this document. The intent is to keep a unified specification for natural environments that each Program calls out for appropriate application. This document defines the natural environments parameter limits (maximum and minimum values, energy spectra, or precise model inputs, assumptions, model options, etc.), for all ESD Programs. These environments are developed by the NASA Marshall Space Flight Center (MSFC) Natural Environments Branch (MSFC organization code: EV44). Many of the parameter limits are based on experience with previous programs, such as the Space Shuttle Program. The parameter limits contain no margin and are meant to be evaluated individually to ensure they are reasonable (i.e., do not apply unrealistic extreme-on-extreme conditions). The natural environments specifications in this document should be accounted for by robust design of the flight vehicle and support systems. However, it is understood that in some cases the Programs will find it more effective to account for portions of the environment ranges by operational mitigation or acceptance of risk in accordance with an appropriate program risk management plan and/or hazard analysis process. The DSNE is not intended as a definition of operational models or operational constraints, nor is it adequate, alone, for ground facilities which may have additional requirements (for example, building codes and local environmental constraints). "Natural environments," as the term is used here, refers to the environments that are not the result of intended human activity or intervention. It consists of a variety of external environmental factors (most of natural origin and a few of human origin) which impose restrictions or otherwise impact the development or operation of flight vehicles and destination surface systems.

Managing complex research datasets using electronic tools: A meta-analysis exemplar

PubMed Central

Brown, Sharon A.; Martin, Ellen E.; Garcia, Theresa J.; Winter, Mary A.; García, Alexandra A.; Brown, Adama; Cuevas, Heather E.; Sumlin, Lisa L.

2013-01-01

Meta-analyses of broad scope and complexity require investigators to organize many study documents and manage communication among several research staff. Commercially available electronic tools, e.g., EndNote, Adobe Acrobat Pro, Blackboard, Excel, and IBM SPSS Statistics (SPSS), are useful for organizing and tracking the meta-analytic process, as well as enhancing communication among research team members. The purpose of this paper is to describe the electronic processes we designed, using commercially available software, for an extensive quantitative model-testing meta-analysis we are conducting. Specific electronic tools improved the efficiency of (a) locating and screening studies, (b) screening and organizing studies and other project documents, (c) extracting data from primary studies, (d) checking data accuracy and analyses, and (e) communication among team members. The major limitation in designing and implementing a fully electronic system for meta-analysis was the requisite upfront time to: decide on which electronic tools to use, determine how these tools would be employed, develop clear guidelines for their use, and train members of the research team. The electronic process described here has been useful in streamlining the process of conducting this complex meta-analysis and enhancing communication and sharing documents among research team members. PMID:23681256

Managing complex research datasets using electronic tools: a meta-analysis exemplar.

PubMed

Brown, Sharon A; Martin, Ellen E; Garcia, Theresa J; Winter, Mary A; García, Alexandra A; Brown, Adama; Cuevas, Heather E; Sumlin, Lisa L

2013-06-01

Meta-analyses of broad scope and complexity require investigators to organize many study documents and manage communication among several research staff. Commercially available electronic tools, for example, EndNote, Adobe Acrobat Pro, Blackboard, Excel, and IBM SPSS Statistics (SPSS), are useful for organizing and tracking the meta-analytic process as well as enhancing communication among research team members. The purpose of this article is to describe the electronic processes designed, using commercially available software, for an extensive, quantitative model-testing meta-analysis. Specific electronic tools improved the efficiency of (a) locating and screening studies, (b) screening and organizing studies and other project documents, (c) extracting data from primary studies, (d) checking data accuracy and analyses, and (e) communication among team members. The major limitation in designing and implementing a fully electronic system for meta-analysis was the requisite upfront time to decide on which electronic tools to use, determine how these tools would be used, develop clear guidelines for their use, and train members of the research team. The electronic process described here has been useful in streamlining the process of conducting this complex meta-analysis and enhancing communication and sharing documents among research team members.

Cryptographic framework for document-objects resulting from multiparty collaborative transactions.

PubMed

Goh, A

2000-01-01

Multiparty transactional frameworks--i.e. Electronic Data Interchange (EDI) or Health Level (HL) 7--often result in composite documents which can be accurately modelled using hyperlinked document-objects. The structural complexity arising from multiauthor involvement and transaction-specific sequencing would be poorly handled by conventional digital signature schemes based on a single evaluation of a one-way hash function and asymmetric cryptography. In this paper we outline the generation of structure-specific authentication hash-trees for the the authentication of transactional document-objects, followed by asymmetric signature generation on the hash-tree value. Server-side multi-client signature verification would probably constitute the single most compute-intensive task, hence the motivation for our usage of the Rabin signature protocol which results in significantly reduced verification workloads compared to the more commonly applied Rivest-Shamir-Adleman (RSA) protocol. Data privacy is handled via symmetric encryption of message traffic using session-specific keys obtained through key-negotiation mechanisms based on discrete-logarithm cryptography. Individual client-to-server channels can be secured using a double key-pair variation of Diffie-Hellman (DH) key negotiation, usage of which also enables bidirectional node authentication. The reciprocal server-to-client multicast channel is secured through Burmester-Desmedt (BD) key-negotiation which enjoys significant advantages over the usual multiparty extensions to the DH protocol. The implementation of hash-tree signatures and bi/multidirectional key negotiation results in a comprehensive cryptographic framework for multiparty document-objects satisfying both authentication and data privacy requirements.

Querying archetype-based EHRs by search ontology-based XPath engineering.

PubMed

Kropf, Stefan; Uciteli, Alexandr; Schierle, Katrin; Krücken, Peter; Denecke, Kerstin; Herre, Heinrich

2018-05-11

Legacy data and new structured data can be stored in a standardized format as XML-based EHRs on XML databases. Querying documents on these databases is crucial for answering research questions. Instead of using free text searches, that lead to false positive results, the precision can be increased by constraining the search to certain parts of documents. A search ontology-based specification of queries on XML documents defines search concepts and relates them to parts in the XML document structure. Such query specification method is practically introduced and evaluated by applying concrete research questions formulated in natural language on a data collection for information retrieval purposes. The search is performed by search ontology-based XPath engineering that reuses ontologies and XML-related W3C standards. The key result is that the specification of research questions can be supported by the usage of search ontology-based XPath engineering. A deeper recognition of entities and a semantic understanding of the content is necessary for a further improvement of precision and recall. Key limitation is that the application of the introduced process requires skills in ontology and software development. In future, the time consuming ontology development could be overcome by implementing a new clinical role: the clinical ontologist. The introduced Search Ontology XML extension connects Search Terms to certain parts in XML documents and enables an ontology-based definition of queries. Search ontology-based XPath engineering can support research question answering by the specification of complex XPath expressions without deep syntax knowledge about XPaths.

Spectrum analysis on quality requirements consideration in software design documents.

PubMed

Kaiya, Haruhiko; Umemura, Masahiro; Ogata, Shinpei; Kaijiri, Kenji

2013-12-01

Software quality requirements defined in the requirements analysis stage should be implemented in the final products, such as source codes and system deployment. To guarantee this meta-requirement, quality requirements should be considered in the intermediate stages, such as the design stage or the architectural definition stage. We propose a novel method for checking whether quality requirements are considered in the design stage. In this method, a technique called "spectrum analysis for quality requirements" is applied not only to requirements specifications but also to design documents. The technique enables us to derive the spectrum of a document, and quality requirements considerations in the document are numerically represented in the spectrum. We can thus objectively identify whether the considerations of quality requirements in a requirements document are adapted to its design document. To validate the method, we applied it to commercial software systems with the help of a supporting tool, and we confirmed that the method worked well.

VOTable Format Definition Version 1.3

NASA Astrophysics Data System (ADS)

Ochsenbein, Francois; Taylor, Mark; Williams, Roy; Davenhall, Clive; Demleitner, Markus; Durand, Daniel; Fernique, Pierre; Giaretta, David; Hanisch, Robert; McGlynn, Tom; Szalay, Alex; Wicenec, Andreas; Ochsenbein, Francois; Taylor, Mark

2013-09-01

This document describes the structures making up the VOTable standard. The main part of this document describes the adopted part of the VOTable standard; it is followed by appendices presenting extensions which have been proposed and/or discussed, but which are not part of the standard.

76 FR 52945 - Chlorpyrifos Registration Review; Preliminary Human Health Risk Assessment; Extension of Comment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-24

... Review; Preliminary Human Health Risk Assessment; Extension of Comment Period AGENCY: Environmental... chlorpyrifos registration review; preliminary human health risk assessment. This document extends the comment... review, preliminary human health risk assessment, established in the Federal Register of Wednesday, July...

Castles Made of Sand: Building Sustainable Digitized Collections Using XML.

ERIC Educational Resources Information Center

Ragon, Bart

2003-01-01

Describes work at the University of Virginia library to digitize special collections. Discusses the use of XML (Extensible Markup Language); providing access to original source materials; DTD (Document Type Definition); TEI (Text Encoding Initiative); metadata; XSL (Extensible Style Language); and future possibilities. (LRW)

50 CFR 300.185 - Documentation, reporting and recordkeeping requirements for consignment documents and re-export...

Code of Federal Regulations, 2012 CFR

2012-10-01

... recordkeeping requirements for consignment documents and re-export certificates. 300.185 Section 300.185..., reporting and recordkeeping requirements for consignment documents and re-export certificates. (a) Imports... apply only to entries for consumption. The reporting requirements of paragraph (a)(3) of this section do...

50 CFR 300.185 - Documentation, reporting and recordkeeping requirements for consignment documents and re-export...

Code of Federal Regulations, 2014 CFR

2014-10-01

... recordkeeping requirements for consignment documents and re-export certificates. 300.185 Section 300.185..., reporting and recordkeeping requirements for consignment documents and re-export certificates. (a) Imports... apply only to entries for consumption. The reporting requirements of paragraph (a)(3) of this section do...

50 CFR 300.185 - Documentation, reporting and recordkeeping requirements for consignment documents and re-export...

Code of Federal Regulations, 2013 CFR

2013-10-01

... recordkeeping requirements for consignment documents and re-export certificates. 300.185 Section 300.185..., reporting and recordkeeping requirements for consignment documents and re-export certificates. (a) Imports... apply only to entries for consumption. The reporting requirements of paragraph (a)(3) of this section do...

22 CFR 40.71 - Documentation requirements for immigrants.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Documentation requirements for immigrants. 40... NONIMMIGRANTS AND IMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Documentation Requirements § 40.71 Documentation requirements for immigrants. INA 212(a)(7)(A) is not applicable at the time of...

Basic Hitchhiker Payload Requirements

NASA Technical Reports Server (NTRS)

Horan, Stephen

1999-01-01

This document lists the requirements for the NMSU Hitchhiker experiment payload that were developed as part of the EE 498/499 Capstone Design class during the 1999-2000 academic year. This document is used to describe the system needs as described in the mission document. The requirements listed here are those primarily used to generate the basic electronic and data processing requirements developed in the class design document. The needs of the experiment components are more fully described in the draft NASA hitchhiker customer requirements document. Many of the details for the overall payload are given in full detail in the NASA hitchhiker documentation.

Functions and requirements document for interim store solidified high-level and transuranic waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith-Fewell, M.A., Westinghouse Hanford

1996-05-17

The functions, requirements, interfaces, and architectures contained within the Functions and Requirements (F{ampersand}R) Document are based on the information currently contained within the TWRS Functions and Requirements database. The database also documents the set of technically defensible functions and requirements associated with the solidified waste interim storage mission.The F{ampersand}R Document provides a snapshot in time of the technical baseline for the project. The F{ampersand}R document is the product of functional analysis, requirements allocation and architectural structure definition. The technical baseline described in this document is traceable to the TWRS function 4.2.4.1, Interim Store Solidified Waste, and its related requirements, architecture,more » and interfaces.« less

Science Requirements Document for OMI-EOS. 2

NASA Technical Reports Server (NTRS)

Bhartia, P. K.; Chance, K.; Isaksen, I.; Levelt, P. F.; Boersma, F.; Brinksma, E.; Carpay, J.; vanderA, R.; deHaan, J.; Hilsenrath, E.

2000-01-01

A Dutch-Finnish scientific and industrial consortium is supplying the Ozone Monitoring Instrument (OMI) for Earth Observing System-Aura (EOS-Aura). EOS-Aura is the next NASA mission to study the Earth's atmosphere extensively, and successor to the highly successful UARS (Upper Atmospheric Research Satellite) mission. The 'Science Requirements Document for OMI-EOS' presents an overview of the Aura and OMI mission objectives. It describes how OMI fits into the Aura mission and it reviews the synergy with the other instruments onboard Aura to fulfill the mission. This evolves in the Scientific Requirements for OMI (Chapter 3), stating which trace gases have to be measured with what necessary accuracy, in order for OMI to meet Aura's objectives. The most important data product of OMI, the ozone vertical column, densities shall have a better accuracy and an improved global coverage than the predecessor instruments TOMS (Total Ozone Monitoring Spectrometer) and GOME (Global Ozone Monitoring Experiment), which is a.o. achieved by a better signal to noise ratio, improved calibration and a wide field-of-view. Moreover, in order to meet its role on Aura, OMI shall measure trace gases, such as NO2, OClO, BrO, HCHO and SO2, aerosols, cloud top height and cloud coverage. Improved accuracy, better coverage, and finer ground grid than has been done in the past are goals for OMI. After the scientific requirements are defined, three sets of subordinate requirements are derived. These are: the algorithm requirements, i.e. what do the algorithms need in order to meet the scientific requirements; the instrument and calibration requirements, i.e. what has to be measured and how accurately in order to provide the quality of data necessary for deriving the data products; and the validation requirements, i.e. a strategy of how the OMI program will assure that its data products are valid in the atmosphere, at least to the required accuracy.

Use of System Safety Risk Assessments for the Space Shuttle Reusable Solid Rocket Motor (RSRM)

NASA Technical Reports Server (NTRS)

Greenhalgh, Phillip O.; McCool, Alex (Technical Monitor)

2001-01-01

This paper discusses the System Safety approach used to assess risk for the Space Shuttle Reusable Solid Rocket Motor (RSRM). Previous to the first RSRM flight in the fall of 1988, all systems were analyzed extensively to assure that hazards were identified, assessed and that the baseline risk was understood and appropriately communicated. Since the original RSRM baseline was established, Thiokol and NASA have implemented a number of initiatives that have further improved the RSRM. The robust design, completion of rigorous testing and flight success of the RSRM has resulted in a wise reluctance to make changes. One of the primary assessments required to accompany the documentation of each proposed change and aid in the decision making process is a risk assessment. Documentation supporting proposed changes, including the risk assessments from System Safety, are reviewed and assessed by Thiokol and NASA technical management. After thorough consideration, approved changes are implemented adding improvements to and reducing risk of the Space Shuttle RSRM.

Occupational therapy and physiotherapy for the patient with burns: principles and management guidelines.

PubMed

Simons, M; King, S; Edgar, D

2003-01-01

Clinical practice guidelines are a tool to assist with clinical decision making. They provide information about the care for a condition and make recommendations based on research evidence, which can be adapted locally. A focus group within the Allied Health Interest Group of the Australian and New Zealand Burn Association has compiled the "Occupational Therapy and Physiotherapy for the Patient with Burns--Principles and Management Guidelines." These guidelines are designed as a practical guide to the relevant clinical knowledge and therapy intervention techniques required for effective patient management. Content areas include respiratory management, edema management, splinting and positioning, physical function (mobility, function, exercise), scar management, and psychosocial and mutual elements. The document has undergone extensive review by members of the Australian and New Zealand Burn Association to ensure clarity, internal consistency, and acceptability. The guidelines have been endorsed by the Australian and New Zealand Burn Association. An abridged version of the guidelines is included in this article, with the full document available from www.anzba.org.au.

ARX - A Comprehensive Tool for Anonymizing Biomedical Data

PubMed Central

Prasser, Fabian; Kohlmayer, Florian; Lautenschläger, Ronald; Kuhn, Klaus A.

2014-01-01

Collaboration and data sharing have become core elements of biomedical research. Especially when sensitive data from distributed sources are linked, privacy threats have to be considered. Statistical disclosure control allows the protection of sensitive data by introducing fuzziness. Reduction of data quality, however, needs to be balanced against gains in protection. Therefore, tools are needed which provide a good overview of the anonymization process to those responsible for data sharing. These tools require graphical interfaces and the use of intuitive and replicable methods. In addition, extensive testing, documentation and openness to reviews by the community are important. Existing publicly available software is limited in functionality, and often active support is lacking. We present ARX, an anonymization tool that i) implements a wide variety of privacy methods in a highly efficient manner, ii) provides an intuitive cross-platform graphical interface, iii) offers a programming interface for integration into other software systems, and iv) is well documented and actively supported. PMID:25954407

Automated clinical annotation of tissue bank specimens.

PubMed

Gilbertson, John R; Gupta, Rajnish; Nie, Yimin; Patel, Ashokkumar A; Becich, Michael J

2004-01-01

Modern, molecular bio-medicine is driving a growing demand for extensively annotated tissue bank specimens. With careful clinical, pathologic and outcomes annotation, samples can be better matched to the research question at hand and experimental results better understood and verified. However, the difficulty and expense of detailed specimen annotation is well beyond the capability of most banks and has made access to well documented tissue a major limitation in medical re-search. In this context, we have implemented automated annotation of banked tissue by integrating data from three clinical systems--the cancer registry, the pathology LIS and the tissue bank inventory system--through a classical data warehouse environment. The project required modification of clinical systems, development of methods to identify patients between and map data elements across systems and the creation of de-identified data in data marts for use by researchers. The result has been much more extensive and accurate initial tissue annotation with less effort in the tissue bank, as well as dynamic ongoing annotation as the cancer registry follows patients over time.

Iterative Integration of Visual Insights during Scalable Patent Search and Analysis.

PubMed

Koch, S; Bosch, H; Giereth, M; Ertl, T

2011-05-01

Patents are of growing importance in current economic markets. Analyzing patent information has, therefore, become a common task for many interest groups. As a prerequisite for patent analysis, extensive search for relevant patent information is essential. Unfortunately, the complexity of patent material inhibits a straightforward retrieval of all relevant patent documents and leads to iterative, time-consuming approaches in practice. Already the amount of patent data to be analyzed poses challenges with respect to scalability. Further scalability issues arise concerning the diversity of users and the large variety of analysis tasks. With "PatViz", a system for interactive analysis of patent information has been developed addressing scalability at various levels. PatViz provides a visual environment allowing for interactive reintegration of insights into subsequent search iterations, thereby bridging the gap between search and analytic processes. Because of its extensibility, we expect that the approach we have taken can be employed in different problem domains that require high quality of search results regarding their completeness.

Agricultural Extension in Africa. A World Bank Symposium.

ERIC Educational Resources Information Center

Roberts, Nigel, Ed.

The contributors to this document compare the main approaches to agricultural extension in sub-Saharan Africa; the cost-effectiveness in view of precarious national budgets; the weaknesses of the system for generating technology; the difficulties in forging productive partnerships between researchers, extensionists and farmers; the ineffective…

Development of Regulatory Documents for Creation (Upgrade) of Physical Protection Systems under the Russian/American MPC&A Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Izmaylov, Alexandr V.; Babkin, Vladimir; Kurov, Valeriy

2009-10-07

The development of new or the upgrade of existing physical protection systems (PPS) for nuclear facilities involves a multi-step and multidimensional process. The process consists of conceptual design, design, and commissioning stages. The activities associated with each of these stages are governed by Russian government and agency regulations. To ensure a uniform approach to development or upgrading of PPS at Russian nuclear facilities, the development of a range of regulatory and methodological documents is necessary. Some issues of PPS development are covered by the regulatory documents developed by Rosatom, as well as other Russian agencies with nuclear facilities under theirmore » control. This regulatory development has been accomplished as part of the U.S.-Russian MPC&A cooperation or independently by the Russian Federation. While regulatory coverage is extensive, there are a number of issues such as vulnerability analysis, effectiveness assessment, upgrading PPS, and protection of information systems for PPS that require additional regulations be developed. This paper reports on the status of regulatory coverage for PPS development or upgrade, and outlines a new approach to regulatory document development. It describes the evolutionary process of regulatory development through experience gained in the design, development and implementation of PPS as well as experience gained through the cooperative efforts of Russian and U.S. experts involved the development of MPC&A regulations.« less

Representing Information in Patient Reports Using Natural Language Processing and the Extensible Markup Language

PubMed Central

Friedman, Carol; Hripcsak, George; Shagina, Lyuda; Liu, Hongfang

1999-01-01

Objective: To design a document model that provides reliable and efficient access to clinical information in patient reports for a broad range of clinical applications, and to implement an automated method using natural language processing that maps textual reports to a form consistent with the model. Methods: A document model that encodes structured clinical information in patient reports while retaining the original contents was designed using the extensible markup language (XML), and a document type definition (DTD) was created. An existing natural language processor (NLP) was modified to generate output consistent with the model. Two hundred reports were processed using the modified NLP system, and the XML output that was generated was validated using an XML validating parser. Results: The modified NLP system successfully processed all 200 reports. The output of one report was invalid, and 199 reports were valid XML forms consistent with the DTD. Conclusions: Natural language processing can be used to automatically create an enriched document that contains a structured component whose elements are linked to portions of the original textual report. This integrated document model provides a representation where documents containing specific information can be accurately and efficiently retrieved by querying the structured components. If manual review of the documents is desired, the salient information in the original reports can also be identified and highlighted. Using an XML model of tagging provides an additional benefit in that software tools that manipulate XML documents are readily available. PMID:9925230

ICESat (GLAS) Science Processing Software Document Series. Volume 3; GLAS Science Software Requirements Document; Ver 2.1

NASA Technical Reports Server (NTRS)

Jester, Peggy L.; Lee, Jeffrey; Zukor, Dorothy J. (Technical Monitor)

2001-01-01

This document addresses the software requirements of the Geoscience Laser Altimeter System (GLAS) Standard Data Software (SDS) supporting the GLAS instrument on the EOS ICESat Spacecraft. This Software Requirements Document represents the initial collection of the technical engineering information for the GLAS SDS. This information is detailed within the second of four main volumes of the Standard documentation, the Product Specification volume. This document is a "roll-out" from the governing volume outline containing the Concept and Requirements sections.

10 CFR 1707.203 - Filing requirements for demands or requests for documents or testimony.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Filing requirements for demands or requests for documents... Production of Documents § 1707.203 Filing requirements for demands or requests for documents or testimony. You must comply with the following requirements whenever you issue demands or requests to a DNFSB...

Educational Voucher Demonstration Archive: Project-Level Documentation.

ERIC Educational Resources Information Center

Leinwand (C.M.) Associates, Inc., Newton, MA.

This report describes the Educational Voucher Demonstration, serves as a guide for its documentation, and offers an extensive bibliography. Part 1 gives background information and summarizes the implementation of the Alum Rock Demonstration based on a transitional voucher model and involving six public schools, each offering at least two distinct…

42 CFR 495.324 - Prior approval conditions.

Code of Federal Regulations, 2010 CFR

2010-10-01

...: (1) The HIT advance planning document and the implementation advance planning document. (2) A request... $100,000 or contract time extensions of more than 60 days. (4) The State Medicaid HIT plan. (c) Failure...-competitively from a nongovernmental source HIT equipment or services, with proposed FFP under this subpart if...

Chapter 4: Variant descriptions

Treesearch

Duncan C. Lutes; Donald C. E. Robinson

2003-01-01

The Fire and Fuels Extension (FFE) to the Forest Vegetation Simulator (FVS) simulates fuel dynamics and potential fire behavior over time, in the context of stand development and management. This report documents differences between geographic variants of the FFE. It is a companion document to the FFE "Model Description" and "User's Guide."...

77 FR 13026 - Energy Conservation Program: Energy Conservation Standard for Automatic Commercial Ice Makers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

... written comments on these subjects. This document announces an extension of the time period for submitting... preliminary technical support document (preliminary TSD) for automatic commercial ice makers. The comment... published a Federal Register notice announcing the availability of its preliminary technical support...

77 FR 46739 - Proposed Extension of Approval of Information Collection; Comment Request-Baby Bouncers and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-06

... CONSUMER PRODUCT SAFETY COMMISSION Proposed Extension of Approval of Information Collection; Comment Request--Baby Bouncers and Walker-Jumpers AGENCY: Consumer Product Safety Commission. ACTION...-bouncers and walker-jumpers. This document was published in the Federal Register of June 20, 2012, and...

77 FR 55812 - Proposed Extension of Approval of Information Collection; Comment Request-Baby Bouncers and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-11

... CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC-2012-0038] Proposed Extension of Approval of Information Collection; Comment Request--Baby Bouncers and Walker-Jumpers AGENCY: Consumer Product Safety... walker-jumpers. This document was published in the Federal Register of September 5, 2012, and contains an...

Leadership Development Seminar: Developing Human Capital through Extension Leadership Programs. Proceedings (Manhattan, Kansas, August 6, 1989).

ERIC Educational Resources Information Center

Bolton, Elizabeth B.; White, Lynn

Nineteen papers are included in this document: "Potential and Impact: Assessment and Validation in Leadership Development" (Boatman); "Using an Organizational Diagnostic Instrument to Analyze Perceptions of the Virginia Extension Homemakers Council" (Newhouse, Chandler, Tuckwiller); "Image: Who Needs It?" (Hendricks,…

75 FR 67383 - Extension of the Designation of Somalia for Temporary Protected Status

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-02

... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services [CIS No. 2497-99; DHS... Status AGENCY: U.S. Citizenship and Immigration Services, Department of Homeland Security (DHS). ACTION... extension of their employment authorization documents (EADs) with U.S. Citizenship and Immigration Services...

28 CFR 4.13 - Record for decision. Receipt of documents comprising record; timing and extension.

Code of Federal Regulations, 2010 CFR

2010-07-01

... comprising record; timing and extension. 4.13 Section 4.13 Judicial Administration DEPARTMENT OF JUSTICE... DISCLOSURE ACT OF 1959, AND THE EMPLOYEE RETIREMENT INCOME SECURITY ACT OF 1974 § 4.13 Record for decision... and reasons therefor will be noted in the record. ...

Research on Generating Method of Embedded Software Test Document Based on Dynamic Model

NASA Astrophysics Data System (ADS)

Qu, MingCheng; Wu, XiangHu; Tao, YongChao; Liu, Ying

2018-03-01

This paper provides a dynamic model-based test document generation method for embedded software that provides automatic generation of two documents: test requirements specification documentation and configuration item test documentation. This method enables dynamic test requirements to be implemented in dynamic models, enabling dynamic test demand tracking to be easily generated; able to automatically generate standardized, standardized test requirements and test documentation, improved document-related content inconsistency and lack of integrity And other issues, improve the efficiency.

Pre-examination factors affecting molecular diagnostic test results and interpretation: A case-based approach.

PubMed

Payne, Deborah A; Baluchova, Katarina; Peoc'h, Katell H; van Schaik, Ron H N; Chan, K C Allen; Maekawa, Masato; Mamotte, Cyril; Russomando, Graciela; Rousseau, François; Ahmad-Nejad, Parviz

2017-04-01

Multiple organizations produce guidance documents that provide opportunities to harmonize quality practices for diagnostic testing. The International Organization for Standardization ISO 15189 standard addresses requirements for quality in management and technical aspects of the clinical laboratory. One technical aspect addresses the complexities of the pre-examination phase prior to diagnostic testing. The Committee for Molecular Diagnostics of the International Federation for Clinical Chemistry and Laboratory Medicine (also known as, IFCC C-MD) conducted a survey of international molecular laboratories and determined ISO 15189 to be the most referenced guidance document. In this review, the IFCC C-MD provides case-based examples illustrating the value of select pre-examination processes as these processes relate to molecular diagnostic testing. Case-based examples in infectious disease, oncology, inherited disease and pharmacogenomics address the utility of: 1) providing information to patients and users, 2) designing requisition forms, 3) obtaining informed consent and 4) maintaining sample integrity prior to testing. The pre-examination phase requires extensive and consistent communication between the laboratory, the healthcare provider and the end user. The clinical vignettes presented in this paper illustrate the value of applying select ISO 15189 recommendations for general laboratory to the more specialized area of Molecular Diagnostics. Copyright © 2016 Elsevier B.V. All rights reserved.

X-PAT: a multiplatform patient referral data management system for small healthcare institution requirements.

PubMed

Masseroli, Marco; Marchente, Mario

2008-07-01

We present X-PAT, a platform-independent software prototype that is able to manage patient referral multimedia data in an intranet network scenario according to the specific control procedures of a healthcare institution. It is a self-developed storage framework based on a file system, implemented in eXtensible Markup Language (XML) and PHP Hypertext Preprocessor Language, and addressed to the requirements of limited-dimension healthcare entities (small hospitals, private medical centers, outpatient clinics, and laboratories). In X-PAT, healthcare data descriptions, stored in a novel Referral Base Management System (RBMS) according to Health Level 7 Clinical Document Architecture Release 2 (CDA R2) standard, can be easily applied to the specific data and organizational procedures of a particular healthcare working environment thanks also to the use of standard clinical terminology. Managed data, centralized on a server, are structured in the RBMS schema using a flexible patient record and CDA healthcare referral document structures based on XML technology. A novel search engine allows defining and performing queries on stored data, whose rapid execution is ensured by expandable RBMS indexing structures. Healthcare personnel can interface the X-PAT system, according to applied state-of-the-art privacy and security measures, through friendly and intuitive Web pages that facilitate user acceptance.

48 CFR 11.101 - Order of precedence for requirements documents.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... (2) Performance-oriented documents (e.g., a PWS or SOO). (See 2.101.) (3) Detailed design-oriented... requirements documents. 11.101 Section 11.101 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 11...

SIENA Customer Problem Statement and Requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

L. Sauer; R. Clay; C. Adams

2000-08-01

This document describes the problem domain and functional requirements of the SIENA framework. The software requirements and system architecture of SIENA are specified in separate documents (called SIENA Software Requirement Specification and SIENA Software Architecture, respectively). While currently this version of the document describes the problems and captures the requirements within the Analysis domain (concentrating on finite element models), it is our intention to subsequent y expand this document to describe problems and capture requirements from the Design and Manufacturing domains. In addition, SIENA is designed to be extendible to support and integrate elements from the other domains (see SIENAmore » Software Architecture document).« less

SLS Model Based Design: A Navigation Perspective

NASA Technical Reports Server (NTRS)

Oliver, T. Emerson; Anzalone, Evan; Park, Thomas; Geohagan, Kevin

2018-01-01

The SLS Program has implemented a Model-based Design (MBD) and Model-based Requirements approach for managing component design information and system requirements. This approach differs from previous large-scale design efforts at Marshall Space Flight Center where design documentation alone conveyed information required for vehicle design and analysis and where extensive requirements sets were used to scope and constrain the design. The SLS Navigation Team is responsible for the Program-controlled Design Math Models (DMMs) which describe and represent the performance of the Inertial Navigation System (INS) and the Rate Gyro Assemblies (RGAs) used by Guidance, Navigation, and Controls (GN&C). The SLS Navigation Team is also responsible for navigation algorithms. The navigation algorithms are delivered for implementation on the flight hardware as a DMM. For the SLS Block 1B design, the additional GPS Receiver hardware model is managed as a DMM at the vehicle design level. This paper describes the models, and discusses the processes and methods used to engineer, design, and coordinate engineering trades and performance assessments using SLS practices as applied to the GN&C system, with a particular focus on the navigation components.

Using SysML for verification and validation planning on the Large Synoptic Survey Telescope (LSST)

NASA Astrophysics Data System (ADS)

Selvy, Brian M.; Claver, Charles; Angeli, George

2014-08-01

This paper provides an overview of the tool, language, and methodology used for Verification and Validation Planning on the Large Synoptic Survey Telescope (LSST) Project. LSST has implemented a Model Based Systems Engineering (MBSE) approach as a means of defining all systems engineering planning and definition activities that have historically been captured in paper documents. Specifically, LSST has adopted the Systems Modeling Language (SysML) standard and is utilizing a software tool called Enterprise Architect, developed by Sparx Systems. Much of the historical use of SysML has focused on the early phases of the project life cycle. Our approach is to extend the advantages of MBSE into later stages of the construction project. This paper details the methodology employed to use the tool to document the verification planning phases, including the extension of the language to accommodate the project's needs. The process includes defining the Verification Plan for each requirement, which in turn consists of a Verification Requirement, Success Criteria, Verification Method(s), Verification Level, and Verification Owner. Each Verification Method for each Requirement is defined as a Verification Activity and mapped into Verification Events, which are collections of activities that can be executed concurrently in an efficient and complementary way. Verification Event dependency and sequences are modeled using Activity Diagrams. The methodology employed also ties in to the Project Management Control System (PMCS), which utilizes Primavera P6 software, mapping each Verification Activity as a step in a planned activity. This approach leads to full traceability from initial Requirement to scheduled, costed, and resource loaded PMCS task-based activities, ensuring all requirements will be verified.

Towards a Molecular Understanding of the Fanconi Anemia Core Complex

PubMed Central

Hodson, Charlotte; Walden, Helen

2012-01-01

Fanconi Anemia (FA) is a genetic disorder characterized by the inability of patient cells to repair DNA damage caused by interstrand crosslinking agents. There are currently 14 verified FA genes, where mutation of any single gene prevents repair of DNA interstrand crosslinks (ICLs). The accumulation of ICL damage results in genome instability and patients having a high predisposition to cancers. The key event of the FA pathway is dependent on an eight-protein core complex (CC), required for the monoubiquitination of each member of the FANCD2-FANCI complex. Interestingly, the majority of patient mutations reside in the CC. The molecular mechanisms underlying the requirement for such a large complex to carry out a monoubiquitination event remain a mystery. This paper documents the extensive efforts of researchers so far to understand the molecular roles of the CC proteins with regard to its main function in the FA pathway, the monoubiquitination of FANCD2 and FANCI. PMID:22675617

Extended performance solar electric propulsion thrust system study. Volume 4: Thruster technology evaluation

NASA Technical Reports Server (NTRS)

Poeschel, R. L.; Hawthorne, E. I.; Weisman, Y. C.; Frisman, M.; Benson, G. C.; Mcgrath, R. J.; Martinelli, R. M.; Linsenbardt, T. L.; Beattie, J. R.

1977-01-01

Several thrust system design concepts were evaluated and compared using the specifications of the most advanced 30 cm engineering model thruster as the technology base. Emphasis was placed on relatively high power missions (60 to 100 kW) such as a Halley's comet rendezvous. The extensions in thruster performance required for the Halley's comet mission were defined and alternative thrust system concepts were designed in sufficient detail for comparing mass, efficiency, reliability, structure, and thermal characteristics. Confirmation testing and analysis of thruster and power processing components were performed, and the feasibility of satisfying extended performance requirements was verified. A baseline design was selected from the alternatives considered, and the design analysis and documentation were refined. The baseline thrust system design features modular construction, conventional power processing, and a concentrator solar array concept and is designed to interface with the Space Shuttle.

Role of geophysics in identifying and characterizing sites for high-level nuclear waste repositories.

USGS Publications Warehouse

Wynn, J.C.; Roseboom, E.H.

1987-01-01

Evaluation of potential high-level nuclear waste repository sites is an area where geophysical capabilities and limitations may significantly impact a major governmental program. Since there is concern that extensive exploratory drilling might degrade most potential disposal sites, geophysical methods become crucial as the only nondestructive means to examine large volumes of rock in three dimensions. Characterization of potential sites requires geophysicists to alter their usual mode of thinking: no longer are anomalies being sought, as in mineral exploration, but rather their absence. Thus the size of features that might go undetected by a particular method take on new significance. Legal and regulatory considerations that stem from this different outlook, most notably the requirements of quality assurance (necessary for any data used in support of a repository license application), are forcing changes in the manner in which geophysicists collect and document their data. -Authors

Statistical Tools for Designing Initial and Post-Removal UXO Characterization Surveys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pulsipher, Brent A.; Gilbert, Richard O.; Wilson, John E.

2002-09-06

The Department of Defense (DoD) is in the process of assessing and remediating closed, transferred, and transferring ranges. It is estimated that over 20 million acres of land in the United States potentially contain UXO. The release of DoD sites for public use will require high confidence that UXO is not present. This high confidence may be achieved solely from an extensive knowledge of historical site operations as documented in the conceptual site model or in combination with geophysical sensor surveys designed to have a sufficiently high probability of finding UXO contaminated zones. Many of these sites involve very largemore » geographical areas such that it is often impractical and/or cost prohibitive to perform 100% surveys of the entire site of interest. In that case, it is necessary to be explicit about the performance required of a survey that covers less than 100% of the site.« less

Methanol production from Eucalyptus wood chips. Working Document 2. Vegetative propagation of Eucalypts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fishkind, H.H.

1982-04-01

The feasibility of large-scale plantation establishment by various methods was examined, and the following conclusions were reached: seedling plantations are limited in potential yield due to genetic variation among the planting stock and often inadequate supplies of appropriate seed; vegetative propagation by rooted cuttings can provide good genetic uniformity of select hybrid planting stock; however, large-scale production requires establishment and maintenance of extensive cutting orchards. The collection of shoots and preparation of cuttings, although successfully implemented in the Congo and Brazil, would not be economically feasible in Florida for large-scale plantations; tissue culture propagation of select hybrid eucalypts offers themore » only opportunity to produce the very large number of trees required to establish the energy plantation. The cost of tissue culture propagation, although higher than seedling production, is more than off-set by the increased productivity of vegetative plantations established from select hybrid Eucalyptus.« less

Extended performance solar electric propulsion thrust system study. Volume 2: Baseline thrust system

NASA Technical Reports Server (NTRS)

Poeschel, R. L.; Hawthorne, E. I.

1977-01-01

Several thrust system design concepts were evaluated and compared using the specifications of the most advanced 30- cm engineering model thruster as the technology base. Emphasis was placed on relatively high-power missions (60 to 100 kW) such as a Halley's comet rendezvous. The extensions in thruster performance required for the Halley's comet mission were defined and alternative thrust system concepts were designed in sufficient detail for comparing mass, efficiency, reliability, structure, and thermal characteristics. Confirmation testing and analysis of thruster and power-processing components were performed, and the feasibility of satisfying extended performance requirements was verified. A baseline design was selected from the alternatives considered, and the design analysis and documentation were refined. The baseline thrust system design features modular construction, conventional power processing, and a concentractor solar array concept and is designed to interface with the space shuttle.

LIHE Spectral Dynamics and Jaguar Data Acquisition System Measurement Assurance Results 2014.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Covert, Timothy T.; Willis, Michael David; Radtke, Gregg Arthur

2015-06-01

The Light Initiated High Explosive (LIHE) facility performs high rigor, high consequence impulse testing for the nuclear weapons (NW) community. To support the facility mission, LIHE's extensive data acquisition system (DAS) is comprised of several discrete components as well as a fully integrated system. Due to the high consequence and high rigor of the testing performed at LIHE, a measurement assurance plan (MAP) was developed in collaboration with NW system customers to meet their data quality needs and to provide assurance of the robustness of the LIHE DAS. While individual components of the DAS have been calibrated by the SNLmore » Primary Standards Laboratory (PSL), the integrated nature of this complex system requires verification of the complete system, from end-to-end. This measurement assurance plan (MAP) report documents the results of verification and validation procedures used to ensure that the data quality meets customer requirements.« less

Informed Consent: Does Anyone Really Understand What Is Contained In The Medical Record?

PubMed

Fenton, S H; Manion, F; Hsieh, K; Harris, M

2015-01-01

Despite efforts to provide standard definitions of terms such as "medical record", "computer-based patient record", "electronic medical record" and "electronic health record", the terms are still used interchangeably. Initiatives like data and information governance, research biorepositories, and learning health systems require availability and reuse of data, as well as common understandings of the scope for specific purposes. Lacking widely shared definitions, utilization of the afore-mentioned terms in research informed consent documents calls to question whether all participants in the research process - patients, information technology and regulatory staff, and the investigative team - fully understand what data and information they are asking to obtain and agreeing to share. This descriptive study explored the terminology used in research informed consent documents when describing patient data and information, asking the question "Does the use of the term "medical record" in the context of a research informed consent document accurately represent the scope of the data involved?" Informed consent document templates found on 17 Institutional Review Board (IRB) websites with Clinical and Translational Science Awards (CTSA) were searched for terms that appeared to be describing the data resources to be accessed. The National Library of Medicine's (NLM) Terminology Services was searched for definitions provided by key standards groups that deposit terminologies with the NLM. The results suggest research consent documents are using outdated terms to describe patient information, health care terminology systems need to consider the context of research for use cases, and that there is significant work to be done to assure the HIPAA Omnibus Rule is applied to contemporary activities such as biorepositories and learning health systems. "Medical record", a term used extensively in research informed consent documents, is ambiguous and does not serve us well in the context of contemporary information management and governance.

Autonomous Navigation Error Propagation Assessment for Lunar Surface Mobility Applications

NASA Technical Reports Server (NTRS)

Welch, Bryan W.; Connolly, Joseph W.

2006-01-01

The NASA Vision for Space Exploration is focused on the return of astronauts to the Moon. While navigation systems have already been proven in the Apollo missions to the moon, the current exploration campaign will involve more extensive and extended missions requiring new concepts for lunar navigation. In this document, the results of an autonomous navigation error propagation assessment are provided. The analysis is intended to be the baseline error propagation analysis for which Earth-based and Lunar-based radiometric data are added to compare these different architecture schemes, and quantify the benefits of an integrated approach, in how they can handle lunar surface mobility applications when near the Lunar South pole or on the Lunar Farside.

Amelogenesis imperfecta and anterior open bite: Etiological, classification, clinical and management interrelationships

PubMed Central

Alachioti, Xanthippi Sofia; Dimopoulou, Eleni; Vlasakidou, Anatoli; Athanasiou, Athanasios E

2014-01-01

Although amelogenesis imperfecta is not a common dental pathological condition, its etiological, classification, clinical and management aspects have been addressed extensively in the scientific literature. Of special clinical consideration is the frequent co-existence of amelogenesis imperfecta with the anterior open bite. This paper provides an updated review on amelogenesis imperfecta as well as anterior open bite, in general, and documents the association of these two separate entities, in particular. Diagnosis and treatment of amelogenesis imperfecta patients presenting also with anterior open bite require a lengthy, comprehensive and multidisciplinary approach, which should aim to successfully address all dental, occlusal, developmental, skeletal and soft tissue problems associated with these two serious clinical conditions. PMID:24987656

Interplanetary mission design handbook. Volume 1, part 4: Earth to Saturn ballistic mission opportunities, 1985-2005

NASA Technical Reports Server (NTRS)

Sergeyevsky, A. B.; Snyder, G. C.

1981-01-01

Graphical data necessary for the preliminary design of ballistic missions to Saturn are provided. Contours of launch energy requirements as well as many other launch and Saturn arrival parameters, are presented in launch date/arrival date space for all launch opportunities from 1985 through 2005. In addition, an extensive text is included which explains mission design methods, from launch window development to Saturn probe and orbiter arrival design, utilizing the graphical data in this volume as well as numerous equations elating various parameters. This is the first of a planned series of mission design documents which will apply to all planets and some other bodies in the solar system.

Amelogenesis imperfecta and anterior open bite: Etiological, classification, clinical and management interrelationships.

PubMed

Alachioti, Xanthippi Sofia; Dimopoulou, Eleni; Vlasakidou, Anatoli; Athanasiou, Athanasios E

2014-01-01

Although amelogenesis imperfecta is not a common dental pathological condition, its etiological, classification, clinical and management aspects have been addressed extensively in the scientific literature. Of special clinical consideration is the frequent co-existence of amelogenesis imperfecta with the anterior open bite. This paper provides an updated review on amelogenesis imperfecta as well as anterior open bite, in general, and documents the association of these two separate entities, in particular. Diagnosis and treatment of amelogenesis imperfecta patients presenting also with anterior open bite require a lengthy, comprehensive and multidisciplinary approach, which should aim to successfully address all dental, occlusal, developmental, skeletal and soft tissue problems associated with these two serious clinical conditions.

Observational Search for Negative Matter in Intergalactic Voids

NASA Technical Reports Server (NTRS)

Forward, Robert L.

1999-01-01

Negative matter is a hypothetical form of matter with negative rest mass, inertial mass, and gravitational mass. It is not antimatter. If negative matter could be collected in macroscopic amounts, its negative inertial property could be used to make an continuously operating propulsion system which requires neither energy nor reaction mass, yet still violates no laws of physics. Negative matter has never been observed, but its existence is not forbidden by the laws of physics. We propose that NASA support an extension to an ongoing astrophysical observational effort by da Costa, et al. (1996) which could possibly determine whether or not negative matter exists in the well-documented but little-understood intergalactic voids.

A fuel cycle assessment guide for utility and state energy planners

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-07-01

This guide, one in a series of documents designed to help assess fuel cycles, is a framework for setting parameters, collecting data, and analyzing fuel cycles for supply-side and demand-side management. It provides an automated tool for entering comparative fuel cycle data that are meaningful to state and utility integrated resource planning, collaborative, and regional energy planning activities. It outlines an extensive range of energy technology characteristics and environmental, social, and economic considerations within each stage of a fuel cycle. The guide permits users to focus on specific stages or effects that are relevant to the technology being evaluated andmore » that meet the user`s planning requirements.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carmack, William Jonathan; Braase, Lori Ann

Fuel recovery from severe accidents requires careful planning and execution. The Idaho National Laboratory played a key role in the Three Mile Island (TMI) fuel and core recovery. This involved technology development to locate and handle the damaged fuel; characterization of fuel and debris; analysis of fuel interaction with structural components and materials; development of fuel drying technology for long-term storage. However, one of the critical activities from the TMI project was the extensive effort document all the activities and archive the reports and photos. A historical review of the TMI project at the INL leads to the identification ofmore » current applications and considerations for facility designs, fuel handling, robotic applications, material characterization, etc.« less

Sellar Floor Reconstruction with the Medpor Implant Versus Autologous Bone After Transnasal Transsphenoidal Surgery: Outcome in 200 Consecutive Patients.

PubMed

Liebelt, Brandon D; Huang, Meng; Baskin, David S

2015-08-01

The Medpor porous polyethylene implant provides benefits to perform sellar floor reconstruction when indicated. This material has been used for cranioplasty and reconstruction of skull base defects and facial fractures. We present the most extensive use of this implant for sellar floor reconstruction and document the safety and benefits provided by this unique implant. The medical charts for 200 consecutive patients undergoing endonasal transsphenoidal surgery from April 2008 through December 2011 were reviewed. Material used for sellar floor reconstruction, pathologic diagnosis, immediate inpatient complications, and long-term complications were documented and analyzed. Outpatient follow-up was documented for a minimum of 1-year duration, extending in some patients up to 5 years. Of the 200 consecutive patients, 136 received sellar floor cranioplasty using the Medpor implant. Postoperative complications included 6 complaints of sinus irritation or drainage, 1 postoperative cerebrospinal fluid leak requiring operative re-exploration, 1 event of tension pneumocephalus requiring operative decompression, 1 case of aseptic meningitis, 1 subdural hematoma, and 1 case of epistaxis. The incidence of these complications did not differ from the autologous nasal bone group in a statistically significant manner. Sellar floor reconstruction remains an important part of transsphenoidal surgery to prevent postoperative complications. Various autologous and synthetic options are available to reconstruct the sellar floor, and the Medpor implant is a safe and effective option. The complication rate after surgery is equivalent to or less frequent than other methods of reconstruction and the implant is readily incorporated into host tissue after implantation, minimizing infectious risk. Copyright © 2015 Elsevier Inc. All rights reserved.

Speech sound discrimination training improves auditory cortex responses in a rat model of autism

PubMed Central

Engineer, Crystal T.; Centanni, Tracy M.; Im, Kwok W.; Kilgard, Michael P.

2014-01-01

Children with autism often have language impairments and degraded cortical responses to speech. Extensive behavioral interventions can improve language outcomes and cortical responses. Prenatal exposure to the antiepileptic drug valproic acid (VPA) increases the risk for autism and language impairment. Prenatal exposure to VPA also causes weaker and delayed auditory cortex responses in rats. In this study, we document speech sound discrimination ability in VPA exposed rats and document the effect of extensive speech training on auditory cortex responses. VPA exposed rats were significantly impaired at consonant, but not vowel, discrimination. Extensive speech training resulted in both stronger and faster anterior auditory field (AAF) responses compared to untrained VPA exposed rats, and restored responses to control levels. This neural response improvement generalized to non-trained sounds. The rodent VPA model of autism may be used to improve the understanding of speech processing in autism and contribute to improving language outcomes. PMID:25140133

45 CFR 164.316 - Policies and procedures and documentation requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... when it last was in effect, whichever is later. (ii) Availability (Required). Make documentation.... (iii) Updates (Required). Review documentation periodically, and update as needed, in response to...

A graph-based approach for designing extensible pipelines

PubMed Central

2012-01-01

Background In bioinformatics, it is important to build extensible and low-maintenance systems that are able to deal with the new tools and data formats that are constantly being developed. The traditional and simplest implementation of pipelines involves hardcoding the execution steps into programs or scripts. This approach can lead to problems when a pipeline is expanding because the incorporation of new tools is often error prone and time consuming. Current approaches to pipeline development such as workflow management systems focus on analysis tasks that are systematically repeated without significant changes in their course of execution, such as genome annotation. However, more dynamism on the pipeline composition is necessary when each execution requires a different combination of steps. Results We propose a graph-based approach to implement extensible and low-maintenance pipelines that is suitable for pipeline applications with multiple functionalities that require different combinations of steps in each execution. Here pipelines are composed automatically by compiling a specialised set of tools on demand, depending on the functionality required, instead of specifying every sequence of tools in advance. We represent the connectivity of pipeline components with a directed graph in which components are the graph edges, their inputs and outputs are the graph nodes, and the paths through the graph are pipelines. To that end, we developed special data structures and a pipeline system algorithm. We demonstrate the applicability of our approach by implementing a format conversion pipeline for the fields of population genetics and genetic epidemiology, but our approach is also helpful in other fields where the use of multiple software is necessary to perform comprehensive analyses, such as gene expression and proteomics analyses. The project code, documentation and the Java executables are available under an open source license at http://code.google.com/p/dynamic-pipeline. The system has been tested on Linux and Windows platforms. Conclusions Our graph-based approach enables the automatic creation of pipelines by compiling a specialised set of tools on demand, depending on the functionality required. It also allows the implementation of extensible and low-maintenance pipelines and contributes towards consolidating openness and collaboration in bioinformatics systems. It is targeted at pipeline developers and is suited for implementing applications with sequential execution steps and combined functionalities. In the format conversion application, the automatic combination of conversion tools increased both the number of possible conversions available to the user and the extensibility of the system to allow for future updates with new file formats. PMID:22788675

Preparing PNNL Reports with LaTeX

DOE Office of Scientific and Technical Information (OSTI.GOV)

Waichler, Scott R.

2005-06-01

LaTeX is a mature document preparation system that is the standard in many scientific and academic workplaces. It has been used extensively by scattered individuals and research groups within PNNL for years, but until now there have been no centralized or lab-focused resources to help authors and editors. PNNL authors and editors can produce correctly formatted PNNL or PNWD reports using the LaTeX document preparation system and the available template files. Please visit the PNNL-LaTeX Project (http://stidev.pnl.gov/resources/latex/, inside the PNNL firewall) for additional information and files. In LaTeX, document content is maintained separately from document structure for the most part.more » This means that the author can easily produce the same content in different formats and, more importantly, can focus on the content and write it in a plain text file that doesn't go awry, is easily transferable, and won't become obsolete due to software changes. LaTeX produces the finest print quality output; its typesetting is noticeably better than that of MS Word. This is particularly true for mathematics, tables, and other types of special text. Other benefits of LaTeX: easy handling of large numbers of figures and tables; automatic and error-free captioning, citation, cross-referencing, hyperlinking, and indexing; excellent published and online documentation; free or low-cost distributions for Windows/Linux/Unix/Mac OS X. This document serves two purposes: (1) it provides instructions to produce reports formatted to PNNL requirements using LaTeX, and (2) the document itself is in the form of a PNNL report, providing examples of many solved formatting challenges. Authors can use this document or its skeleton version (with formatting examples removed) as the starting point for their own reports. The pnnreport.cls class file and pnnl.bst bibliography style file contain the required formatting specifications for reports to the Department of Energy. Options are also provided for formatting PNWD (non-1830) reports. This documentation and the referenced files are meant to provide a complete package of PNNL particulars for authors and editors who wish to prepare technical reports using LaTeX. The example material in this document was borrowed from real reports and edited for demonstration purposes. The subject matter content of the example material is not relevant here and generally does not make literal sense in the context of this document. Brackets ''[]'' are used to denote large blocks of example text. The PDF file for this report contains hyperlinks to facilitate navigation. Hyperlinks are provided for all cross-referenced material, including section headings, figures, tables, and references. Not all hyperlinks are colored but will be obvious when you move your mouse over them.« less

20 CFR 655.1319 - Document retention requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Document retention requirements. 655.1319... Employment in the United States (H-2A Workers) § 655.1319 Document retention requirements. (a) Entities... retention. Records and documents must be retained for a period of 3 years from the date of certification of...

46 CFR 67.105 - Requirement for determination.

Code of Federal Regulations, 2013 CFR

2013-10-01

... DOCUMENTATION OF VESSELS Tonnage and Dimension Requirements for Vessel Documentation § 67.105 Requirement for determination. The gross and net tonnage and dimensions of a vessel must be determined: (a) For initial documentation; (b) Whenever there is a change in the gross or net tonnage or dimensions of a documented vessel...

46 CFR 67.105 - Requirement for determination.

Code of Federal Regulations, 2014 CFR

2014-10-01

... DOCUMENTATION OF VESSELS Tonnage and Dimension Requirements for Vessel Documentation § 67.105 Requirement for determination. The gross and net tonnage and dimensions of a vessel must be determined: (a) For initial documentation; (b) Whenever there is a change in the gross or net tonnage or dimensions of a documented vessel...

46 CFR 67.105 - Requirement for determination.

Code of Federal Regulations, 2012 CFR

2012-10-01

... DOCUMENTATION OF VESSELS Tonnage and Dimension Requirements for Vessel Documentation § 67.105 Requirement for determination. The gross and net tonnage and dimensions of a vessel must be determined: (a) For initial documentation; (b) Whenever there is a change in the gross or net tonnage or dimensions of a documented vessel...

46 CFR 67.105 - Requirement for determination.

Code of Federal Regulations, 2010 CFR

2010-10-01

... DOCUMENTATION OF VESSELS Tonnage and Dimension Requirements for Vessel Documentation § 67.105 Requirement for determination. The gross and net tonnage and dimensions of a vessel must be determined: (a) For initial documentation; (b) Whenever there is a change in the gross or net tonnage or dimensions of a documented vessel...

46 CFR 67.105 - Requirement for determination.

Code of Federal Regulations, 2011 CFR

2011-10-01

... DOCUMENTATION OF VESSELS Tonnage and Dimension Requirements for Vessel Documentation § 67.105 Requirement for determination. The gross and net tonnage and dimensions of a vessel must be determined: (a) For initial documentation; (b) Whenever there is a change in the gross or net tonnage or dimensions of a documented vessel...

Active learning for ontological event extraction incorporating named entity recognition and unknown word handling.

PubMed

Han, Xu; Kim, Jung-jae; Kwoh, Chee Keong

2016-01-01

Biomedical text mining may target various kinds of valuable information embedded in the literature, but a critical obstacle to the extension of the mining targets is the cost of manual construction of labeled data, which are required for state-of-the-art supervised learning systems. Active learning is to choose the most informative documents for the supervised learning in order to reduce the amount of required manual annotations. Previous works of active learning, however, focused on the tasks of entity recognition and protein-protein interactions, but not on event extraction tasks for multiple event types. They also did not consider the evidence of event participants, which might be a clue for the presence of events in unlabeled documents. Moreover, the confidence scores of events produced by event extraction systems are not reliable for ranking documents in terms of informativity for supervised learning. We here propose a novel committee-based active learning method that supports multi-event extraction tasks and employs a new statistical method for informativity estimation instead of using the confidence scores from event extraction systems. Our method is based on a committee of two systems as follows: We first employ an event extraction system to filter potential false negatives among unlabeled documents, from which the system does not extract any event. We then develop a statistical method to rank the potential false negatives of unlabeled documents 1) by using a language model that measures the probabilities of the expression of multiple events in documents and 2) by using a named entity recognition system that locates the named entities that can be event arguments (e.g. proteins). The proposed method further deals with unknown words in test data by using word similarity measures. We also apply our active learning method for the task of named entity recognition. We evaluate the proposed method against the BioNLP Shared Tasks datasets, and show that our method can achieve better performance than such previous methods as entropy and Gibbs error based methods and a conventional committee-based method. We also show that the incorporation of named entity recognition into the active learning for event extraction and the unknown word handling further improve the active learning method. In addition, the adaptation of the active learning method into named entity recognition tasks also improves the document selection for manual annotation of named entities.

37 CFR 1.730 - Applicant for extension of patent term; signature requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Applicant for extension of patent term; signature requirements. 1.730 Section 1.730 Patents, Trademarks, and Copyrights UNITED... for extension of patent term; signature requirements. (a) Any application for extension of a patent...

Definition of an XML markup language for clinical laboratory procedures and comparison with generic XML markup.

PubMed

Saadawi, Gilan M; Harrison, James H

2006-10-01

Clinical laboratory procedure manuals are typically maintained as word processor files and are inefficient to store and search, require substantial effort for review and updating, and integrate poorly with other laboratory information. Electronic document management systems could improve procedure management and utility. As a first step toward building such systems, we have developed a prototype electronic format for laboratory procedures using Extensible Markup Language (XML). Representative laboratory procedures were analyzed to identify document structure and data elements. This information was used to create a markup vocabulary, CLP-ML, expressed as an XML Document Type Definition (DTD). To determine whether this markup provided advantages over generic markup, we compared procedures structured with CLP-ML or with the vocabulary of the Health Level Seven, Inc. (HL7) Clinical Document Architecture (CDA) narrative block. CLP-ML includes 124 XML tags and supports a variety of procedure types across different laboratory sections. When compared with a general-purpose markup vocabulary (CDA narrative block), CLP-ML documents were easier to edit and read, less complex structurally, and simpler to traverse for searching and retrieval. In combination with appropriate software, CLP-ML is designed to support electronic authoring, reviewing, distributing, and searching of clinical laboratory procedures from a central repository, decreasing procedure maintenance effort and increasing the utility of procedure information. A standard electronic procedure format could also allow laboratories and vendors to share procedures and procedure layouts, minimizing duplicative word processor editing. Our results suggest that laboratory-specific markup such as CLP-ML will provide greater benefit for such systems than generic markup.

10 CFR 820.6 - Computation and extension of time.

Code of Federal Regulations, 2011 CFR

2011-01-01

... otherwise provided, the day of the event from which the designated period begins to run shall not be... added to the time allowed by these rules for the filing of a responsive pleading or document. Where a pleading or document is served by express mail, only two (2) days shall be added. ...

10 CFR 820.6 - Computation and extension of time.

Code of Federal Regulations, 2013 CFR

2013-01-01

... otherwise provided, the day of the event from which the designated period begins to run shall not be... added to the time allowed by these rules for the filing of a responsive pleading or document. Where a pleading or document is served by express mail, only two (2) days shall be added. ...

10 CFR 820.6 - Computation and extension of time.

Code of Federal Regulations, 2014 CFR

2014-01-01

... otherwise provided, the day of the event from which the designated period begins to run shall not be... added to the time allowed by these rules for the filing of a responsive pleading or document. Where a pleading or document is served by express mail, only two (2) days shall be added. ...

10 CFR 820.6 - Computation and extension of time.

Code of Federal Regulations, 2012 CFR

2012-01-01

... otherwise provided, the day of the event from which the designated period begins to run shall not be... added to the time allowed by these rules for the filing of a responsive pleading or document. Where a pleading or document is served by express mail, only two (2) days shall be added. ...

10 CFR 820.6 - Computation and extension of time.

Code of Federal Regulations, 2010 CFR

2010-01-01

... otherwise provided, the day of the event from which the designated period begins to run shall not be... added to the time allowed by these rules for the filing of a responsive pleading or document. Where a pleading or document is served by express mail, only two (2) days shall be added. ...

"Sortilegio": Cola Rienzi and the Blasphemy of Documentation.

ERIC Educational Resources Information Center

Di Renzo, Anthony

1997-01-01

Pinpoints Cola Rienzi as an important figure in the history of professional writing. States that he combined a passion for classical rhetoric and literature with extensive training in legal documentation to create and sustain a messianic regime in 14th-century Italy by imitating ancient Roman memos and reports in his written edicts. (PA)

[Myths and Realities of Life for Older Americans.

ERIC Educational Resources Information Center

Perspective on Aging, 1975

1975-01-01

The document is comprised of brief excerpts from the Louis Harris and Associates' study for the National Council on the Aging, "The Myth and Reality of Aging in America," the most extensive study ever conducted to determine public attitudes and perceptions of aging in this country, and to document older Americans' views and attitudes…

A User-Centered View of Document Delivery and Interlibrary Loan.

ERIC Educational Resources Information Center

Martin, Harry S., III; Kendrick, Curtis L.

1994-01-01

Discusses reasons why libraries are being forced to seek new forms of information storage. A hypothetical scenario of user-initiated document delivery alternatives integrated with a search process used by a professor using the Harvard OnLine Library Information System is presented. Extensive notes elaborate on the process and the technology…

V-TECS Guide for Auto Mechanics: Suspension Systems, Brakes and Steering.

ERIC Educational Resources Information Center

Moore, Charles G.; And Others

The materials in this document are an extension of a catalog of occupational duties, tasks, and performance objectives relevant to maintaining automotive suspension systems, brakes, and steering mechanisms. This document provides the following for each occupational task within each duty: (1) a standard of performance; (2) the conditions under…

Campus Partnerships Improve Impact Documentation of Nutrition Programs

ERIC Educational Resources Information Center

Brinkman, Patricia

2015-01-01

Partnerships with other campus college units can provide ways of improving Extension's impact documentation. Nutrition programs have relied upon knowledge gained and people's self report of behavior change. Partnering with the College of Nursing, student nurses provided blood screenings during the pre and 6 month follow-up of a pilot heart risk…

Exit Surveying of Interns: Demonstrating Impact on Young Professionals

ERIC Educational Resources Information Center

Muscio, Cara

2011-01-01

Documenting impact is becoming increasingly important as funding becomes tighter for Extension programs. An exit survey for interns conducted via an online survey tool is an opportunity to collect information on knowledge and skill gains, as well as document changes in intentions and attitudes about future career paths. An exit survey conducted…

Dare To Be You: A Diversion Program for First Time Juvenile Offenders.

ERIC Educational Resources Information Center

Vail, Ann; Nest, Judy

This document notes that community-based organizations such as the Cooperative Extension Service have joined the efforts to reduce juvenile delinquency through juvenile diversion programs. It then describes the "Dare to be You" program that was developed by the Colorado Cooperative Extension System. The six objectives of the program delineated in…

78 FR 66756 - Extension of the Designation of Somalia for Temporary Protected Status

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-06

... DEPARTMENT OF HOMELAND SECURITY U.S. Citizenship and Immigration Services [CIS No. 2538-13; DHS Docket No. USCIS-2013-0006] RIN 1615-ZB24 Extension of the Designation of Somalia for Temporary Protected Status Correction In notice document 2013-25969 beginning on page 65690 in the issue of Friday, November...

The Wiki as a Time-Saving Mentoring Tool

ERIC Educational Resources Information Center

Kinsey, Joanne; Carleo, Jenny; O'Neill, Barbara; Polanin, Nicholas

2010-01-01

An important step in the acculturation of new Extension professionals is a mentoring process that includes the input of experienced Extension colleagues. The wiki is a technology tool that can be useful by providing an online venue for Mentor Team communication and a place to share articles, curricula, and other critical tenure documents. This…

19 CFR 103.8 - Time extensions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Time extensions. 103.8 Section 103.8 Customs... AVAILABILITY OF INFORMATION Production of Documents/Disclosure of Information Under the FOIA § 103.8 Time... deciding an initial request or an appeal may extend the time limitations set in §§ 103.6 and 103.7 after...

19 CFR 103.8 - Time extensions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Time extensions. 103.8 Section 103.8 Customs... AVAILABILITY OF INFORMATION Production of Documents/Disclosure of Information Under the FOIA § 103.8 Time... deciding an initial request or an appeal may extend the time limitations set in §§ 103.6 and 103.7 after...

19 CFR 103.8 - Time extensions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Time extensions. 103.8 Section 103.8 Customs... AVAILABILITY OF INFORMATION Production of Documents/Disclosure of Information Under the FOIA § 103.8 Time... deciding an initial request or an appeal may extend the time limitations set in §§ 103.6 and 103.7 after...

19 CFR 103.8 - Time extensions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Time extensions. 103.8 Section 103.8 Customs... AVAILABILITY OF INFORMATION Production of Documents/Disclosure of Information Under the FOIA § 103.8 Time... deciding an initial request or an appeal may extend the time limitations set in §§ 103.6 and 103.7 after...

19 CFR 103.8 - Time extensions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Time extensions. 103.8 Section 103.8 Customs... AVAILABILITY OF INFORMATION Production of Documents/Disclosure of Information Under the FOIA § 103.8 Time... deciding an initial request or an appeal may extend the time limitations set in §§ 103.6 and 103.7 after...

Making Evaluation Work for You: Ideas for Deriving Multiple Benefits from Evaluation

ERIC Educational Resources Information Center

Jayaratne, K. S. U.

2016-01-01

Increased demand for accountability has forced Extension educators to evaluate their programs and document program impacts. Due to this situation, some Extension educators may view evaluation simply as the task, imposed on them by administrators, of collecting outcome and impact data for accountability. They do not perceive evaluation as a useful…

A Review of Extension Master Gardener Program Record-Keeping Systems

ERIC Educational Resources Information Center

Dorn, Sheri

2016-01-01

Record-keeping systems (or volunteer management systems) were identified as a capacity-building tool for Extension master gardener volunteer (EMGV) programs. Not all states have or use such systems, and there are differences among existing systems. A survey was conducted in June 2015 to document and compare record-keeping systems for EMGV programs…

48 CFR Appendix A to Chapter 2 - Armed Services Board of Contract Appeals

Code of Federal Regulations, 2012 CFR

2012-10-01

... EXTENSIONS Rule 33Time, Computation and Extensions EX PARTE COMMUNICATIONS Rule 34Ex parte Communications..., taking into account such factors as the size and complexity of the claim, the contractor may file a... exhibits, post-hearing briefs, and documents which the Board has specifically designated to be made a part...

48 CFR Appendix A to Chapter 2 - Armed Services Board of Contract Appeals

Code of Federal Regulations, 2011 CFR

2011-10-01

... EXTENSIONS Rule 33Time, Computation and Extensions EX PARTE COMMUNICATIONS Rule 34Ex parte Communications..., taking into account such factors as the size and complexity of the claim, the contractor may file a... exhibits, post-hearing briefs, and documents which the Board has specifically designated to be made a part...

48 CFR Appendix A to Chapter 2 - Armed Services Board of Contract Appeals

Code of Federal Regulations, 2013 CFR

2013-10-01

... EXTENSIONS Rule 33Time, Computation and Extensions EX PARTE COMMUNICATIONS Rule 34Ex parte Communications..., taking into account such factors as the size and complexity of the claim, the contractor may file a... exhibits, post-hearing briefs, and documents which the Board has specifically designated to be made a part...

25 CFR 559.7 - May a tribe submit documents required by this part electronically?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false May a tribe submit documents required by this part... NOTIFICATIONS AND SUBMISSIONS § 559.7 May a tribe submit documents required by this part electronically? Yes. Tribes wishing to submit documents electronically should contact the Commission for guidance on...

25 CFR 559.7 - May a tribe submit documents required by this part electronically?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false May a tribe submit documents required by this part... NOTIFICATIONS AND SUBMISSIONS § 559.7 May a tribe submit documents required by this part electronically? Yes. Tribes wishing to submit documents electronically should contact the Commission for guidance on...

42 CFR 102.53 - Documentation a survivor must submit to be deemed eligible by the Secretary.

Code of Federal Regulations, 2012 CFR

2012-10-01

... AND HUMAN SERVICES VACCINES SMALLPOX COMPENSATION PROGRAM Required Documentation To Be Deemed Eligible... documentation required in: (1) Section 102.51(a)(2)-(4) (documentation requirements for smallpox vaccine recipients), in the case of a deceased smallpox vaccine recipient. The survivor requester may submit a...

42 CFR 102.53 - Documentation a survivor must submit to be deemed eligible by the Secretary.

Code of Federal Regulations, 2014 CFR

2014-10-01

... AND HUMAN SERVICES VACCINES SMALLPOX COMPENSATION PROGRAM Required Documentation To Be Deemed Eligible... documentation required in: (1) Section 102.51(a)(2)-(4) (documentation requirements for smallpox vaccine recipients), in the case of a deceased smallpox vaccine recipient. The survivor requester may submit a...

42 CFR 102.53 - Documentation a survivor must submit to be deemed eligible by the Secretary.

Code of Federal Regulations, 2013 CFR

2013-10-01

... AND HUMAN SERVICES VACCINES SMALLPOX COMPENSATION PROGRAM Required Documentation To Be Deemed Eligible... documentation required in: (1) Section 102.51(a)(2)-(4) (documentation requirements for smallpox vaccine recipients), in the case of a deceased smallpox vaccine recipient. The survivor requester may submit a...

42 CFR 102.53 - Documentation a survivor must submit to be deemed eligible by the Secretary.

Code of Federal Regulations, 2011 CFR

2011-10-01

... AND HUMAN SERVICES VACCINES SMALLPOX COMPENSATION PROGRAM Required Documentation To Be Deemed Eligible... documentation required in: (1) Section 102.51(a)(2)-(4) (documentation requirements for smallpox vaccine recipients), in the case of a deceased smallpox vaccine recipient. The survivor requester may submit a...

42 CFR 102.53 - Documentation a survivor must submit to be deemed eligible by the Secretary.

Code of Federal Regulations, 2010 CFR

2010-10-01

... AND HUMAN SERVICES VACCINES SMALLPOX COMPENSATION PROGRAM Required Documentation To Be Deemed Eligible... documentation required in: (1) Section 102.51(a)(2)-(4) (documentation requirements for smallpox vaccine recipients), in the case of a deceased smallpox vaccine recipient. The survivor requester may submit a...

Carbon Structure Hazard Control

NASA Technical Reports Server (NTRS)

Yoder, Tommy; Greene, Ben; Porter, Alan

2015-01-01

Carbon composite structures are widely used in virtually all advanced technology industries for a multitude of applications. The high strength-to-weight ratio and resistance to aggressive service environments make them highly desirable. Automotive, aerospace, and petroleum industries extensively use, and will continue to use, this enabling technology. As a result of this broad range of use, field and test personnel are increasingly exposed to hazards associated with these structures. No single published document exists to address the hazards and make recommendations for the hazard controls required for the different exposure possibilities from damaged structures including airborne fibers, fly, and dust. The potential for personnel exposure varies depending on the application or manipulation of the structure. The effect of exposure to carbon hazards is not limited to personnel, protection of electronics and mechanical equipment must be considered as well. The various exposure opportunities defined in this document include pre-manufacturing fly and dust, the cured structure, manufacturing/machining, post-event cleanup, and post-event test and/or evaluation. Hazard control is defined as it is applicable or applied for the specific exposure opportunity. The carbon exposure hazard includes fly, dust, fiber (cured/uncured), and matrix vapor/thermal decomposition products. By using the recommendations in this document, a high level of confidence can be assured for the protection of personnel and equipment.

The SeaWiFS Bio-Optical Archive and Storage System (SeaBASS): Current Architecture and Implementation

NASA Technical Reports Server (NTRS)

Werdell, P. Jeremy; Fargion, Giulietta S. (Editor); McClain, Charles R. (Editor); Bailey, Sean W.

2002-01-01

Satellite ocean color missions require an abundance of high-quality in situ measurements for bio-optical and atmospheric algorithm development and post-launch product validation and sensor calibration. To facilitate the assembly of a global data set, the NASA Sea-viewing Wide Field-of-view (SeaWiFS) Project developed the Seafaring Bio-optical Archive and Storage System (SeaBASS), a local repository for in situ data regularly used in their scientific analyses. The system has since been expanded to contain data sets collected by the NASA Sensor Intercalibration and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) Project, as part of NASA Research Announcements NRA-96-MTPE-04 and NRA-99-OES-99. SeaBASS is a well moderated and documented hive for bio-optical data with a simple, secure mechanism for locating and extracting data based on user inputs. Its holdings are available to the general public with the exception of the most recently collected data sets. Extensive quality assurance protocols, comprehensive data and system documentation, and the continuation of an archive and relational database management system (RDBMS) suitable for bio-optical data all contribute to the continued success of SeaBASS. This document provides an overview of the current operational SeaBASS system.

Late Holocene megathrust earthquakes in south central Chile

NASA Astrophysics Data System (ADS)

Garrett, Ed; Shennan, Ian; Gulliver, Pauline; Woodroffe, Sarah

2013-04-01

A lack of comprehensive understanding of the seismic hazards associated with a subduction zone can lead to inadequate anticipation of earthquake and tsunami magnitudes. Four hundred and fifty years of Chilean historical documents record the effects of numerous great earthquakes; however, with recurrence intervals between the largest megathrust earthquakes approaching 300 years, seismic hazard assessment requires longer chronologies. This research seeks to verify and extend historical records in south central Chile using a relative-sea level approach to palaeoseismology. Our quantitative, diatom-based approaches to relative sea-level reconstruction are successful in reconstructing the magnitude of coseismic deformation during recent, well documented Chilean earthquakes. The few disparities between my estimates and independent data highlight the possibility of shaking-induced sediment consolidation in tidal marshes. Following this encouraging confirmation of the approach, we quantify land-level changes in longer sedimentary records from the centre of the rupture zone of the 1960 Valdivia earthquake. Here, laterally extensive marsh soils abruptly overlain by low intertidal sediments attest to the occurrence of four megathrust earthquakes. Sites preserve evidence of the 1960 and 1575 earthquakes and we constrain the timing of two predecessors to 1270 to 1410 and 1050 to 1200. The sediments and biostratigraphy lack evidence for the historically documented 1737 and 1837 earthquakes.

The 30/20 GHz flight experiment system, phase 2. Volume 3: Experiment system requirement document

NASA Technical Reports Server (NTRS)

Bronstein, L.; Kawamoto, Y.; Ribarich, J. J.; Scope, J. R.; Forman, B. J.; Berman, S. G.; Reisenfeld, S.

1981-01-01

An approach to the requirements document to be used to procure the system by NASA is presented. The basic approach is similar to the requirements document used in the commercial communication satellite. Enough detail requirements are given to define the system without tight constraints.

LANES - LOCAL AREA NETWORK EXTENSIBLE SIMULATOR

NASA Technical Reports Server (NTRS)

Gibson, J.

1994-01-01

The Local Area Network Extensible Simulator (LANES) provides a method for simulating the performance of high speed local area network (LAN) technology. LANES was developed as a design and analysis tool for networking on board the Space Station. The load, network, link and physical layers of a layered network architecture are all modeled. LANES models to different lower-layer protocols, the Fiber Distributed Data Interface (FDDI) and the Star*Bus. The load and network layers are included in the model as a means of introducing upper-layer processing delays associated with message transmission; they do not model any particular protocols. FDDI is an American National Standard and an International Organization for Standardization (ISO) draft standard for a 100 megabit-per-second fiber-optic token ring. Specifications for the LANES model of FDDI are taken from the Draft Proposed American National Standard FDDI Token Ring Media Access Control (MAC), document number X3T9.5/83-16 Rev. 10, February 28, 1986. This is a mature document describing the FDDI media-access-control protocol. Star*Bus, also known as the Fiber Optic Demonstration System, is a protocol for a 100 megabit-per-second fiber-optic star-topology LAN. This protocol, along with a hardware prototype, was developed by Sperry Corporation under contract to NASA Goddard Space Flight Center as a candidate LAN protocol for the Space Station. LANES can be used to analyze performance of a networking system based on either FDDI or Star*Bus under a variety of loading conditions. Delays due to upper-layer processing can easily be nullified, allowing analysis of FDDI or Star*Bus as stand-alone protocols. LANES is a parameter-driven simulation; it provides considerable flexibility in specifying both protocol an run-time parameters. Code has been optimized for fast execution and detailed tracing facilities have been included. LANES was written in FORTRAN 77 for implementation on a DEC VAX under VMS 4.6. It consists of two programs, a simulation program and a user-interface program. The simulation program requires the SLAM II simulation library from Pritsker and Associates, W. Lafayette IN; the user interface is implemented using the Ingres database manager from Relational Technology, Inc. Information about running the simulation program without the user-interface program is contained in the documentation. The memory requirement is 129,024 bytes. LANES was developed in 1988.

Views on computer program documentation and automation

NASA Technical Reports Server (NTRS)

Grosch, H. R.

1970-01-01

Various aspects of the problem of program documentation and description are discussed. Particular emphasis is placed on the problem of semantics. It is pointed out that the information produced by documentation of a program, if presented to several different groups, may mean entirely different things to these groups. Recognition of the fact that people look at problems differently is proposed as a more practical approach to the problem of documentation rather than extensive use of standards or strict formatting. The difficulties involved in searching for ways to provide a common ground for the transmission and use of information are discussed.

ENHANCED STREAM WATER QUALITY MODELS QUAL2E AND QUAL2E-UNCAS: DOCUMENTATION AND USER MANUAL

EPA Science Inventory

The manual is a major revision of the original QUAL2E program documentation released in 1985. It includes a description of the recent modifications and improvements to the widely used water quality models QUAL-II and QUAL2E. The enhancements include an extensive capability for un...

Spiritual Practices as a Means of Coping with and Ameliorating Stress to Reduce Teacher Attrition

ERIC Educational Resources Information Center

Hartwick, James M. M.; Kang, Shin Ji

2013-01-01

Teacher attrition has been a serious problem in maintaining quality education in the United States. Although the research produced extensive documentation on teachers' stress and attrition, little attention has been paid to their spiritual stress coping strategies. This article documents various spiritual practices as a means of coping with…

First Steps to Endangered Language Documentation: The Kalasha Language, a Case Study

ERIC Educational Resources Information Center

Mela-Athanasopoulou, Elizabeth

2011-01-01

The present paper based on extensive fieldwork D conducted on Kalasha, an endangered language spoken in the three small valleys in Chitral District of Northwestern Pakistan, exposes a spontaneous dialogue-based elicitation of linguistic material used for the description and documentation of the language. After a brief display of the basic typology…

North Central Region 4-H Volunteers: Documenting Their Contributions and Volunteer Development

ERIC Educational Resources Information Center

Nippolt, Pamela Larson; Pleskac, Sue; Schwartz, Vicki; Swanson, Doug

2012-01-01

Documenting volunteer contributions strengthens Extension partnerships with volunteers. A team of North Central Region 4-H volunteer specialists collaborated to conduct a study of 4-H volunteer contributions and impacts related to working with youth within the 4-H program. Over three thousand (3,332) 4-H volunteers from throughout the 12-state…

Motivating the Documentation of the Verbal Arts: Arguments from Theory and Practice

ERIC Educational Resources Information Center

Fitzgerald, Colleen M.

2017-01-01

For language documentation to be sufficiently extensive to cover a given community's language practices (cf. Himmelmann 1998), then including verbal arts is essential to ensure the richness of that comprehensive record. The verbal arts span the creative and artistic uses of a given language by speakers, such as storytelling, songs, puns and…

Fluor Daniel Hanford contract standards/requirements identification document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, G.L.

1997-04-24

This document, the Standards/Requirements Identification Document (S/RID) for the Fluor Daniel Hanford Contract, represents the necessary and sufficient requirements to provide an adequate level of protection of the worker, public health and safety, and the environment.

27 CFR 19.206 - Curtailment and extension of plant premises for the manufacture of eligible flavors.

Code of Federal Regulations, 2010 CFR

2010-04-01

... of plant premises for the manufacture of eligible flavors. 19.206 Section 19.206 Alcohol, Tobacco... and extension of plant premises for the manufacture of eligible flavors. (a) General. The premises of... permit the use of the facilities for the manufacture of eligible flavors. (b) Qualifying documents. When...

Survey of Land-Grant Colleges and Universities. Bulletin, 1930, No. 9. Volume II. [Part VII - Index

ERIC Educational Resources Information Center

Office of Education, United States Department of the Interior, 1930

1930-01-01

The attached document covers the concluding sections of the second volume of the Survey of Land-Grant Colleges and Universities: Part VII through the index. Part VII, Extension services, is divided into the following sections: (1) Introduction; (2) Position and objectives of Smith-Lever cooperative extension; (3) Administrative organization of…

Testing a New Generation: Implementing Clickers as an Extension Data Collection Tool

ERIC Educational Resources Information Center

Parmer, Sondra M.; Parmer, Greg; Struempler, Barb

2012-01-01

Using clickers to gauge student understanding in large classrooms is well documented. Less well known is the effectiveness of using clickers with youth for test taking in large-scale Extension programs. This article describes the benefits and challenges of collecting evaluation data using clickers with a third-grade population participating in a…

Social Work Practitioners and the Human-Companion Animal Bond: A National Study

ERIC Educational Resources Information Center

Risley-Curtiss, Christina

2010-01-01

Extensive research documents powerful relationships between humans and companion animals, and 62 percent of U. S. households report having a companion animal. Social workers are likely to work with individuals and families with companion animals; thus, the inclusion of such animals in both practice and research as a natural extension of social…

The Concept Approach to Programming in Adult Education--With Special Application to Extension Education.

ERIC Educational Resources Information Center

Collings, Mary L., Ed.

The document reports a 10-year seminar effort to consider a framework for a series of inquiries valuable to all institutions engaged in curriculum development or programing. The work reported includes the study of the professional role of the extension adult educator and identifies concepts, propositions, procedures, and a model for use in…

USER SERVICES AND EXTENSION SERVICES IN SELECTED SPECIAL LIBRARIES AND INFORMATION CENTERS IN THE UNITED STATES.

ERIC Educational Resources Information Center

NONINI, CERISE

A SURVEY BY QUESTIONNAIRE WAS MADE OF THE PROBLEM OF USER SERVICES AND EXTENSION SERVICES USED IN THE DISSEMINATION OF MATERIALS AND INFORMATION TO A SELECTED NUMBER OF INDUSTRIAL LIBRARIES. THE SURVEY RESULTED IN DATA CONCERNING STAFF SIZE, PROFESSIONAL-TO-CLERICAL RATIO, SIZE OF BOOK, DOCUMENT, PERIODICAL AND MICROFORM COLLECTIONS, LIBRARY…

A range extension for Carex sartwellii in interior Alaska

Treesearch

Mark Winterstein; Teresa N Hollingsworth; Carolyn Parker

2016-01-01

Our documentation of Sartwell’s Sedge, Carex sartwellii, on nine shrinking lakes during fieldwork in the central Yukon Flats, Alaska, represents a range extension for this species. Previously, its range extended as far northwest as Yukon, Canada, with a reported, but lost collection, from Alaska in 1895. Two earlier collections from the Yukon Flats...

17 CFR 12.6 - Extensions of time; adjournments; postponements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... limit for that action. (b) Motions for extension of time. Absent extraordinary circumstances, in any... motion or the motion of a party, may at any time extend or shorten the time limit prescribed by the rules for filing any document. In any instance in which a time limit is not prescribed for an action to be...

77 FR 36018 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-15

..., Washington, DC 20549-0213. Extension: Form TH; OMB Control No. 3235-0425; SEC File No. 270-377. Notice is... request for extension of the previously approved collection of information discussed below. Form TH (17... prescribed by Rule 201(a) of Regulation S-T. (17 CFR 232.201(a)). Form TH is a public document and is filed...

76 FR 14840 - Extension of Comment Period: EPA's Plan for Retrospective Review Under Executive Order 13563

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... published in the Federal Register a document seeking public input on the design of a plan to use for periodic retrospective review of its regulations (76 FR 9988). This input is being solicited in response to...] Extension of Comment Period: EPA's Plan for Retrospective Review Under Executive Order 13563 AGENCY...

75 FR 21577 - Notice of Request for Extension of Approval of an Information Collection; Communicable Diseases...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

... DEPARTMENT OF AGRICULTURE Animal and Plant Health Inspection Service [Docket No. APHIS-2010-0009] Notice of Request for Extension of Approval of an Information Collection; Communicable Diseases in Horses Correction In notice document 2010-9054 on page 20559 in the issue of April 20, 2010, make the following...

IDC Re-Engineering Phase 2 System Specification Document Version 1.5

DOE Office of Scientific and Technical Information (OSTI.GOV)

Satpathi, Meara Allena; Burns, John F.; Harris, James M.

This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Re-Engineering Phase 2 project. This System Specification Document (SSD) defines waveform data processing requirements for the International Data Centre (IDC) of the Comprehensive Nuclear Test Ban Treaty Organization (CTBTO). The routine processing includes characterization of events with the objective of screening out events considered to be consistent with natural phenomena or non-nuclear, man-made phenomena. This document does not address requirements concerning acquisition, processing and analysis of radionuclide data but does include requirements for the dissemination of radionuclide datamore » and products.« less

Using SCR methods to analyze requirements documentation

NASA Technical Reports Server (NTRS)

Callahan, John; Morrison, Jeffery

1995-01-01

Software Cost Reduction (SCR) methods are being utilized to analyze and verify selected parts of NASA's EOS-DIS Core System (ECS) requirements documentation. SCR is being used as a spot-inspection tool. Through this formal and systematic approach of the SCR requirements methods, insights as to whether the requirements are internally inconsistent or incomplete as the scenarios of intended usage evolve in the OC (Operations Concept) documentation. Thus, by modelling the scenarios and requirements as mode charts using the SCR methods, we have been able to identify problems within and between the documents.

Tarjetas v.1.2015.7.23

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burchard, Ross L.; Pierson, Kathleen P.; Trumbo, Derek

Tarjetas is used to generate requirements from source documents. These source documents are in a hierarchical XML format that have been produced from PDF documents processed through the “Reframe” software package. The software includes the ability to create Topics and associate text Snippets with those topics. Requirements are then generated and text Snippets with their associated Topics are referenced to the requirement. The software maintains traceability from the requirement ultimately to the source document that produced the snippet

Hanford Site National Environmental Policy Act (NEPA) Characterization Report, Revision 17

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neitzel, Duane A.; Bunn, Amoret L.; Cannon, Sandra D.

2005-09-30

This document describes the U.S. Department of Energy’s (DOE) Hanford Site environment. It is updated each year and is intended to provide a consistent description of the Hanford Site environment for the many environmental documents being prepared by DOE contractors concerning the National Environmental Policy Act (NEPA). No statements about significance or environmental consequences are provided. This year’s report is the seventeenth revision of the original document published in 1988 and is (until replaced by the eighteenth revision) the only version that is relevant for use in the preparation of Hanford NEPA, State Environmental Policy Act (SEPA), and Comprehensive Environmentalmore » Response, Compensation, and Liability Act (CERCLA) documents. The two chapters included in this document (Chapters 4 and 6) are numbered to correspond to the chapters where such information is typically presented in environmental impact statements (EISs) and other Hanford Site NEPA or CERCLA documentation. Chapter 4.0 (Affected Environment) describes Hanford Site climate and meteorology; air quality; geology; hydrology; ecology; cultural, archaeological, and historical resources; socioeconomics; noise; and occupational health and safety. Sources for extensive tabular data related to these topics are provided in the chapter. Most subjects are divided into a general description of the characteristics of the Hanford Site, followed by site-specific information, where available, of the 100, 200, 300, and other areas. This division allows the reader to go directly to those sections of particular interest. When specific information on each of these separate areas is not complete or available, the general Hanford Site description should be used. Chapter 6.0 (Statutory and Regulatory Requirements) describes federal and state laws and regulations, DOE directives and permits, and presidential executive orders that are applicable to the NEPA documents prepared for Hanford Site activities. Information in Chapter 6 of this document can be adapted and supplemented with specific information for a chapter covering statutory and regulatory requirements in an environmental assessment or environmental impact statement. When preparing environmental assessments and EISs, authors should also be cognizant of the document titled Recommendations for the Preparation of Environmental Assessments and Environmental Impact Statements published by the DOE Office of NEPA Oversight (DOE 2004). Additional guidance on preparing DOE NEPA documents can be found at http://tis.eh.doe.gov/nepa/guidance.html. Any interested individual seeking baseline data on the Hanford Site and its past activities may also use the information contained in this document to evaluate projected activities and their impacts. For this 2005 revision, the following sections of the document were reviewed by the authors and updated with the best available information through May 2005: Climate and Meteorology Air Quality Geology – Seismicity section only Hydrology – Flow charts for the Columbia and Yakima rivers only Ecology – Threatened and Endangered Species subsection only Socioeconomics Occupational Safety All of Chapter 6.« less

18 CFR 5.24 - Applications not requiring a draft NEPA document.

Code of Federal Regulations, 2013 CFR

2013-04-01

... requiring a draft NEPA document. 5.24 Section 5.24 Conservation of Power and Water Resources FEDERAL ENERGY... APPLICATION PROCESS § 5.24 Applications not requiring a draft NEPA document. (a) If the Commission determines... environmental impact statement and that a draft environmental assessment will not be required, the Commission...

18 CFR 5.24 - Applications not requiring a draft NEPA document.

Code of Federal Regulations, 2012 CFR

2012-04-01

... requiring a draft NEPA document. 5.24 Section 5.24 Conservation of Power and Water Resources FEDERAL ENERGY... APPLICATION PROCESS § 5.24 Applications not requiring a draft NEPA document. (a) If the Commission determines... environmental impact statement and that a draft environmental assessment will not be required, the Commission...

18 CFR 5.24 - Applications not requiring a draft NEPA document.

Code of Federal Regulations, 2014 CFR

2014-04-01

... requiring a draft NEPA document. 5.24 Section 5.24 Conservation of Power and Water Resources FEDERAL ENERGY... APPLICATION PROCESS § 5.24 Applications not requiring a draft NEPA document. (a) If the Commission determines... environmental impact statement and that a draft environmental assessment will not be required, the Commission...

12 CFR 16.17 - Filing requirements and inspection of documents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... the submission of any fee required under § 16.33 of this part. (e) Any filing of amendments or... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Filing requirements and inspection of documents... SECURITIES OFFERING DISCLOSURE RULES § 16.17 Filing requirements and inspection of documents. (a) Except as...

Clustering document fragments using background color and texture information

NASA Astrophysics Data System (ADS)

Chanda, Sukalpa; Franke, Katrin; Pal, Umapada

2012-01-01

Forensic analysis of questioned documents sometimes can be extensively data intensive. A forensic expert might need to analyze a heap of document fragments and in such cases to ensure reliability he/she should focus only on relevant evidences hidden in those document fragments. Relevant document retrieval needs finding of similar document fragments. One notion of obtaining such similar documents could be by using document fragment's physical characteristics like color, texture, etc. In this article we propose an automatic scheme to retrieve similar document fragments based on visual appearance of document paper and texture. Multispectral color characteristics using biologically inspired color differentiation techniques are implemented here. This is done by projecting document color characteristics to Lab color space. Gabor filter-based texture analysis is used to identify document texture. It is desired that document fragments from same source will have similar color and texture. For clustering similar document fragments of our test dataset we use a Self Organizing Map (SOM) of dimension 5×5, where the document color and texture information are used as features. We obtained an encouraging accuracy of 97.17% from 1063 test images.

Internal NASA Study: NASAs Protoflight Research Initiative

NASA Technical Reports Server (NTRS)

Coan, Mary R.; Hirshorn, Steven R.; Moreland, Robert

2015-01-01

The NASA Protoflight Research Initiative is an internal NASA study conducted within the Office of the Chief Engineer to better understand the use of Protoflight within NASA. Extensive literature reviews and interviews with key NASA members with experience in both robotic and human spaceflight missions has resulted in three main conclusions and two observations. The first conclusion is that NASA's Protoflight method is not considered to be "prescriptive." The current policies and guidance allows each Program/Project to tailor the Protoflight approach to better meet their needs, goals and objectives. Second, Risk Management plays a key role in implementation of the Protoflight approach. Any deviations from full qualification will be based on the level of acceptable risk with guidance found in NPR 8705.4. Finally, over the past decade (2004 - 2014) only 6% of NASA's Protoflight missions and 6% of NASA's Full qualification missions experienced a publicly disclosed mission failure. In other words, the data indicates that the Protoflight approach, in and of it itself, does not increase the mission risk of in-flight failure. The first observation is that it would be beneficial to document the decision making process on the implementation and use of Protoflight. The second observation is that If a Project/Program chooses to use the Protoflight approach with relevant heritage, it is extremely important that the Program/Project Manager ensures that the current project's requirements falls within the heritage design, component, instrument and/or subsystem's requirements for both the planned and operational use, and that the documentation of the relevant heritage is comprehensive, sufficient and the decision well documented. To further benefit/inform this study, a recommendation to perform a deep dive into 30 missions with accessible data on their testing/verification methodology and decision process to research the differences between Protoflight and Full Qualification missions' Design Requirements and Verification & Validation (V&V) (without any impact or special request directly to the project).

TRACER - TRACING AND CONTROL OF ENGINEERING REQUIREMENTS

NASA Technical Reports Server (NTRS)

Turner, P. R.

1994-01-01

TRACER (Tracing and Control of Engineering Requirements) is a database/word processing system created to document and maintain the order of both requirements and descriptive material associated with an engineering project. A set of hierarchical documents are normally generated for a project whereby the requirements of the higher level documents levy requirements on the same level or lower level documents. Traditionally, the requirements are handled almost entirely by manual paper methods. The problem with a typical paper system, however, is that requirements written and changed continuously in different areas lead to misunderstandings and noncompliance. The purpose of TRACER is to automate the capture, tracing, reviewing, and managing of requirements for an engineering project. The engineering project still requires communications, negotiations, interactions, and iterations among people and organizations, but TRACER promotes succinct and precise identification and treatment of real requirements separate from the descriptive prose in a document. TRACER permits the documentation of an engineering project's requirements and progress in a logical, controllable, traceable manner. TRACER's attributes include the presentation of current requirements and status from any linked computer terminal and the ability to differentiate headers and descriptive material from the requirements. Related requirements can be linked and traced. The program also enables portions of documents to be printed, individual approval and release of requirements, and the tracing of requirements down into the equipment specification. Requirement "links" can be made "pending" and invisible to others until the pending link is made "binding". Individuals affected by linked requirements can be notified of significant changes with acknowledgement of the changes required. An unlimited number of documents can be created for a project and an ASCII import feature permits existing documents to be incorporated. TRACER can automatically renumber section headers when inserting or deleting sections of a document and generate sign-off forms for any approval process as well as a table of contents. TRACER was implemented on an IBM PC under PC-DOS. The program requires 640K RAM, a hard disk, and PC-DOS version 3.3 or higher. It was written in CLIPPER (Summer '87). TRACER is available on two 5.25 inch 1.2Mb MS-DOS format diskettes. The executable program is also provided with the distribution. TRACER is a copyrighted work with all copyright vested in the National Aeronautics and Space Administration. IBM PC and PC-DOS are registered trademarks of International Business Machines. CLIPPER is a trademark of Nantucket Corporation.

Computer-Aided Systems Engineering for Flight Research Projects Using a Workgroup Database

NASA Technical Reports Server (NTRS)

Mizukami, Masahi

2004-01-01

An online systems engineering tool for flight research projects has been developed through the use of a workgroup database. Capabilities are implemented for typical flight research systems engineering needs in document library, configuration control, hazard analysis, hardware database, requirements management, action item tracking, project team information, and technical performance metrics. Repetitive tasks are automated to reduce workload and errors. Current data and documents are instantly available online and can be worked on collaboratively. Existing forms and conventional processes are used, rather than inventing or changing processes to fit the tool. An integrated tool set offers advantages by automatically cross-referencing data, minimizing redundant data entry, and reducing the number of programs that must be learned. With a simplified approach, significant improvements are attained over existing capabilities for minimal cost. By using a workgroup-level database platform, personnel most directly involved in the project can develop, modify, and maintain the system, thereby saving time and money. As a pilot project, the system has been used to support an in-house flight experiment. Options are proposed for developing and deploying this type of tool on a more extensive basis.

Independent Orbiter Assessment (IOA): Analysis of the auxiliary power unit

NASA Technical Reports Server (NTRS)

Barnes, J. E.

1986-01-01

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. This report documents the independent analysis results corresponding to the Orbiter Auxiliary Power Unit (APU). The APUs are required to provide power to the Orbiter hydraulics systems during ascent and entry flight phases for aerosurface actuation, main engine gimballing, landing gear extension, and other vital functions. For analysis purposes, the APU system was broken down into ten functional subsystems. Each level of hardware was evaluated and analyzed for possible failure modes and effects. Criticality was assigned based upon the severity of the effect for each failure mode. A preponderance of 1/1 criticality items were related to failures that allowed the hydrazine fuel to escape into the Orbiter aft compartment, creating a severe fire hazard, and failures that caused loss of the gas generator injector cooling system.

Advanced transportation system studies technical area 2 (TA-2): Heavy lift launch vehicle development. volume 3; Program Cost estimates

NASA Technical Reports Server (NTRS)

McCurry, J. B.

1995-01-01

The purpose of the TA-2 contract was to provide advanced launch vehicle concept definition and analysis to assist NASA in the identification of future launch vehicle requirements. Contracted analysis activities included vehicle sizing and performance analysis, subsystem concept definition, propulsion subsystem definition (foreign and domestic), ground operations and facilities analysis, and life cycle cost estimation. The basic period of performance of the TA-2 contract was from May 1992 through May 1993. No-cost extensions were exercised on the contract from June 1993 through July 1995. This document is part of the final report for the TA-2 contract. The final report consists of three volumes: Volume 1 is the Executive Summary, Volume 2 is Technical Results, and Volume 3 is Program Cost Estimates. The document-at-hand, Volume 3, provides a work breakdown structure dictionary, user's guide for the parametric life cycle cost estimation tool, and final report developed by ECON, Inc., under subcontract to Lockheed Martin on TA-2 for the analysis of heavy lift launch vehicle concepts.

TREATMENT OF METAL-LADEN HAZARDOUS WASTES WITH ADVANCED CLEAN COAL TECHNOLOGY BY-PRODUCTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

James T. Cobb, Jr.

2003-09-12

Metal-laden wastes can be stabilized and solidified using advanced clean coal technology by-products (CCTBs)--fluid bed combustor ash and spray drier solids. These utility-generated treatment chemicals are available for purchase through brokers, and commercial applications of this process are being practiced by treaters of metal-laden hazardous waste. A complex of regulations governs this industry, and sensitivities to this complex has discouraged public documentation of treatment of metal-laden hazardous wastes with CCTBs. This report provides a comprehensive public documentation of laboratory studies that show the efficacy of the stabilization and solidification of metal-laden hazardous wastes--such as lead-contaminated soils and sandblast residues--through treatmentmore » with CCTBs. It then describes the extensive efforts that were made to obtain the permits allowing a commercial hazardous waste treater to utilize CCTBs as treatment chemicals and to install the equipment required to do so. It concludes with the effect of this lengthy process on the ability of the treatment company to realize the practical, physical outcome of this effort, leading to premature termination of the project.« less

Metric Documentation of Cultural Heritage: Research Directions from the Italian Gamher Project

NASA Astrophysics Data System (ADS)

Bitelli, G.; Balletti, C.; Brumana, R.; Barazzetti, L.; D'Urso, M. G.; Rinaudo, F.; Tucci, G.

2017-08-01

GAMHer is a collaborative project that aims at exploiting and validating Geomatics algorithms, methodologies and procedures in the framework of new European regulations, which require a more extensive and productive use of digital information, as requested by the Digital Agenda for Europe as one of the seven pillars of the Europe 2020 Strategy. To this aim, GAMHer focuses on the need of a certified accuracy for surveying and monitoring projects with photogrammetry and laser scanning technologies, especially when used in a multiscale approach for landscape and built heritage documentation, conservation, and management. The approach used follows a multi-LoD (level of detail) transition that exploits GIS systems at the landscape scale, BIM technology and "point cloud based" 3d modelling for the scale of the building, and an innovative BIM/GIS integrated approach to foster innovation, promote users' collaboration and encourage communication between users. The outcomes of GAMHer are not intended to be used only by a community of Geomatics specialists, but also by a heterogeneous user community that exploit images and laser scans in their professional activities.

7 CFR 1423.6 - Financial information documentation requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... CORPORATION APPROVED WAREHOUSES § 1423.6 Financial information documentation requirements. To be approved under this part, a warehouse operator shall submit a current financial statement at the time of... 7 Agriculture 10 2010-01-01 2010-01-01 false Financial information documentation requirements...

TWRS configuration management requirement source document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vann, J.M.

The TWRS Configuration Management (CM) Requirement Source document prescribes CM as a basic product life-cycle function by which work and activities are conducted or accomplished. This document serves as the requirements basis for the TWRS CM program. The objective of the TWRS CM program is to establish consistency among requirements, physical/functional configuration, information, and documentation for TWRS and TWRS products, and to maintain this consistency throughout the life-cycle of TWRS and the product, particularly as changes are being made.

Automated documentation generator for advanced protein crystal growth

NASA Technical Reports Server (NTRS)

Maddux, Gary A.; Provancha, Anna; Chattam, David

1994-01-01

To achieve an environment less dependent on the flow of paper, automated techniques of data storage and retrieval must be utilized. This software system, 'Automated Payload Experiment Tool,' seeks to provide a knowledge-based, hypertext environment for the development of NASA documentation. Once developed, the final system should be able to guide a Principal Investigator through the documentation process in a more timely and efficient manner, while supplying more accurate information to the NASA payload developer. The current system is designed for the development of the Science Requirements Document (SRD), the Experiment Requirements Document (ERD), the Project Plan, and the Safety Requirements Document.

Exploring molecular networks using MONET ontology.

PubMed

Silva, João Paulo Müller da; Lemke, Ney; Mombach, José Carlos; Souza, José Guilherme Camargo de; Sinigaglia, Marialva; Vieira, Renata

2006-03-31

The description of the complex molecular network responsible for cell behavior requires new tools to integrate large quantities of experimental data in the design of biological information systems. These tools could be used in the characterization of these networks and in the formulation of relevant biological hypotheses. The building of an ontology is a crucial step because it integrates in a coherent framework the concepts necessary to accomplish such a task. We present MONET (molecular network), an extensible ontology and an architecture designed to facilitate the integration of data originating from different public databases in a single- and well-documented relational database, that is compatible with MONET formal definition. We also present an example of an application that can easily be implemented using these tools.

Ada (trademark) projects at NASA. Runtime environment issues and recommendations

NASA Technical Reports Server (NTRS)

Roy, Daniel M.; Wilke, Randall W.

1988-01-01

Ada practitioners should use this document to discuss and establish common short term requirements for Ada runtime environments. The major current Ada runtime environment issues are identified through the analysis of some of the Ada efforts at NASA and other research centers. The runtime environment characteristics of major compilers are compared while alternate runtime implementations are reviewed. Modifications and extensions to the Ada Language Reference Manual to address some of these runtime issues are proposed. Three classes of projects focusing on the most critical runtime features of Ada are recommended, including a range of immediately feasible full scale Ada development projects. Also, a list of runtime features and procurement issues is proposed for consideration by the vendors, contractors and the government.

XML technology planning database : lessons learned

NASA Technical Reports Server (NTRS)

Some, Raphael R.; Neff, Jon M.

2005-01-01

A hierarchical Extensible Markup Language(XML) database called XCALIBR (XML Analysis LIBRary) has been developed by Millennium Program to assist in technology investment (ROI) analysis and technology Language Capability the New return on portfolio optimization. The database contains mission requirements and technology capabilities, which are related by use of an XML dictionary. The XML dictionary codifies a standardized taxonomy for space missions, systems, subsystems and technologies. In addition to being used for ROI analysis, the database is being examined for use in project planning, tracking and documentation. During the past year, the database has moved from development into alpha testing. This paper describes the lessons learned during construction and testing of the prototype database and the motivation for moving from an XML taxonomy to a standard XML-based ontology.

25 CFR 162.528 - What documents are required for BIA approval of a WEEL?

Code of Federal Regulations, 2013 CFR

2013-04-01

... LEASES AND PERMITS Wind and Solar Resource Leases Weel Approval § 162.528 What documents are required for... required by § 162.527; (d) Statement from the appropriate tribal authority that the proposed use is in... environmental and land use requirements, including any documentation prepared under § 162.027(b); (f) An...

25 CFR 162.528 - What documents are required for BIA approval of a WEEL?

Code of Federal Regulations, 2014 CFR

2014-04-01

... LEASES AND PERMITS Wind and Solar Resource Leases Weel Approval § 162.528 What documents are required for... required by § 162.527; (d) Statement from the appropriate tribal authority that the proposed use is in... environmental and land use requirements, including any documentation prepared under § 162.027(b); (f) An...

36 CFR 1251.10 - What are the filing requirements for a demand for documents or testimony?

Code of Federal Regulations, 2011 CFR

2011-07-01

... date that records or testimony is required. Demands submitted in less than 45 days before records or... requirements for a demand for documents or testimony? 1251.10 Section 1251.10 Parks, Forests, and Public... the filing requirements for a demand for documents or testimony? You must comply with the following...

36 CFR 1251.10 - What are the filing requirements for a demand for documents or testimony?

Code of Federal Regulations, 2010 CFR

2010-07-01

... date that records or testimony is required. Demands submitted in less than 45 days before records or... requirements for a demand for documents or testimony? 1251.10 Section 1251.10 Parks, Forests, and Public... the filing requirements for a demand for documents or testimony? You must comply with the following...

PRISMA-Children (C) and PRISMA-Protocol for Children (P-C) Extensions: a study protocol for the development of guidelines for the conduct and reporting of systematic reviews and meta-analyses of newborn and child health research.

PubMed

Kapadia, Mufiza Z; Askie, Lisa; Hartling, Lisa; Contopoulos-Ioannidis, Despina; Bhutta, Zulfiqar A; Soll, Roger; Moher, David; Offringa, Martin

2016-04-18

Paediatric systematic reviews differ from adult systematic reviews in several key aspects such as considerations of child tailored interventions, justifiable comparators, valid outcomes and child sensitive search strategies. Available guidelines, including PRISMA-P (2015) and PRISMA (2009), do not cover all the complexities associated with reporting systematic reviews in the paediatric population. Using a collaborative, multidisciplinary structure, we aim to develop evidence-based and consensus-based PRISMA-P-C (Protocol for Children) and PRISMA-C (Children) Extensions to guide paediatric systematic review protocol and completed review reporting. This project's methodology follows published recommendations for developing reporting guidelines and involves the following six phases; (1) establishment of a steering committee representing key stakeholder groups; (2) a scoping review to identify potential Extension items; (3) three types of consensus activities including meetings of the steering committee to achieve high-level decisions on the content and methodology of the Extensions, a survey of key stakeholders to generate a list of possible items to include in the Extensions and a formal consensus meeting to select the reporting items to add to, or modify for, the Extension; (4) the preliminary checklist items generated in phase III will be evaluated against the existing evidence and reporting practices in paediatric systematic reviews; (5) extension statements and explanation and elaboration documents will provide detailed advice for each item and examples of good reporting; (6) development and implementation of effective knowledge translation of the extension checklist, and an evaluation of the Extensions by key stakeholders. This protocol was considered a quality improvement project by the Hospital for Sick Children's Ethics Committee and did not require ethical review. The resultant checklists, jointly developed with all relevant stakeholders, will be disseminated through peer-reviewed journals as well as national and international conference presentations. Endorsement of the checklist will be sought simultaneously in multiple journals. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

PRISMA-Children (C) and PRISMA-Protocol for Children (P-C) Extensions: a study protocol for the development of guidelines for the conduct and reporting of systematic reviews and meta-analyses of newborn and child health research

PubMed Central

Kapadia, Mufiza Z; Askie, Lisa; Hartling, Lisa; Contopoulos-Ioannidis, Despina; Bhutta, Zulfiqar A; Soll, Roger; Moher, David; Offringa, Martin

2016-01-01

Introduction Paediatric systematic reviews differ from adult systematic reviews in several key aspects such as considerations of child tailored interventions, justifiable comparators, valid outcomes and child sensitive search strategies. Available guidelines, including PRISMA-P (2015) and PRISMA (2009), do not cover all the complexities associated with reporting systematic reviews in the paediatric population. Using a collaborative, multidisciplinary structure, we aim to develop evidence-based and consensus-based PRISMA-P-C (Protocol for Children) and PRISMA-C (Children) Extensions to guide paediatric systematic review protocol and completed review reporting. Methods and analysis This project's methodology follows published recommendations for developing reporting guidelines and involves the following six phases; (1) establishment of a steering committee representing key stakeholder groups; (2) a scoping review to identify potential Extension items; (3) three types of consensus activities including meetings of the steering committee to achieve high-level decisions on the content and methodology of the Extensions, a survey of key stakeholders to generate a list of possible items to include in the Extensions and a formal consensus meeting to select the reporting items to add to, or modify for, the Extension; (4) the preliminary checklist items generated in phase III will be evaluated against the existing evidence and reporting practices in paediatric systematic reviews; (5) extension statements and explanation and elaboration documents will provide detailed advice for each item and examples of good reporting; (6) development and implementation of effective knowledge translation of the extension checklist, and an evaluation of the Extensions by key stakeholders. Ethics and Dissemination This protocol was considered a quality improvement project by the Hospital for Sick Children's Ethics Committee and did not require ethical review. The resultant checklists, jointly developed with all relevant stakeholders, will be disseminated through peer-reviewed journals as well as national and international conference presentations. Endorsement of the checklist will be sought simultaneously in multiple journals. PMID:27091820

7 CFR 1710.405 - Supplemental financing documents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Supplemental financing documents. 1710.405 Section... GUARANTEES Application Requirements and Procedures for Loans § 1710.405 Supplemental financing documents. (a) The borrower is responsible for ensuring that the loan documents required for supplemental financing...

A database and tool for boundary conditions for regional air quality modeling: description and evaluation

NASA Astrophysics Data System (ADS)

Henderson, B. H.; Akhtar, F.; Pye, H. O. T.; Napelenok, S. L.; Hutzell, W. T.

2013-09-01

Transported air pollutants receive increasing attention as regulations tighten and global concentrations increase. The need to represent international transport in regional air quality assessments requires improved representation of boundary concentrations. Currently available observations are too sparse vertically to provide boundary information, particularly for ozone precursors, but global simulations can be used to generate spatially and temporally varying Lateral Boundary Conditions (LBC). This study presents a public database of global simulations designed and evaluated for use as LBC for air quality models (AQMs). The database covers the contiguous United States (CONUS) for the years 2000-2010 and contains hourly varying concentrations of ozone, aerosols, and their precursors. The database is complimented by a tool for configuring the global results as inputs to regional scale models (e.g., Community Multiscale Air Quality or Comprehensive Air quality Model with extensions). This study also presents an example application based on the CONUS domain, which is evaluated against satellite retrieved ozone vertical profiles. The results show performance is largely within uncertainty estimates for the Tropospheric Emission Spectrometer (TES) with some exceptions. The major difference shows a high bias in the upper troposphere along the southern boundary in January. This publication documents the global simulation database, the tool for conversion to LBC, and the fidelity of concentrations on the boundaries. This documentation is intended to support applications that require representation of long-range transport of air pollutants.

Environmental liability and life-cycle management of used lubricating oils.

PubMed

Guerin, Turlough F

2008-12-30

Used oil handling, as a business, requires an extensive understanding by management that environmental liabilities exist through its supply chain. Findings from a review of the legal requirements of operating a used oil handling business were: understanding the transfer of ownership of used petroleum hydrocarbons is critical to any such business and how this is documented; used oil handlers are responsible for providing training to their staff, including site personnel and any third party waste contractors, and for communicating best practice procedures relating to the management of used petroleum hydrocarbons to all those individuals and organisations involved in business relationships that the used oil handling companies have; used oil handlers should audit the performance of any third party contractors that it engages to conduct work on behalf of its customers. Hypothetical situations of a company planning to enter the used oil handling market are described in relation to petroleum hydrocarbon wastes it handles to illustrate the range of potential liabilities. Companies proposing to establish a used oil handling business should ensure that they provide accurate advice to its employees, its customer's employees and to its third party contractors, all of which may be responsible for handling used petroleum hydrocarbons as part of the service it intends to provide, and that it has a well documented system addressing how environmental issues are managed.

Concept document of the repository-based software engineering program: A constructive appraisal

NASA Technical Reports Server (NTRS)

1992-01-01

A constructive appraisal of the Concept Document of the Repository-Based Software Engineering Program is provided. The Concept Document is designed to provide an overview of the Repository-Based Software Engineering (RBSE) Program. The Document should be brief and provide the context for reading subsequent requirements and product specifications. That is, all requirements to be developed should be traceable to the Concept Document. Applied Expertise's analysis of the Document was directed toward assuring that: (1) the Executive Summary provides a clear, concise, and comprehensive overview of the Concept (rewrite as necessary); (2) the sections of the Document make best use of the NASA 'Data Item Description' for concept documents; (3) the information contained in the Document provides a foundation for subsequent requirements; and (4) the document adequately: identifies the problem being addressed; articulates RBSE's specific role; specifies the unique aspects of the program; and identifies the nature and extent of the program's users.

Meckel's cave access: anatomic study comparing the endoscopic transantral and endonasal approaches.

PubMed

Van Rompaey, Jason; Suruliraj, Anand; Carrau, Ricardo; Panizza, Benedict; Solares, C Arturo

2014-04-01

Recent advances in endonasal endoscopy have facilitated the surgical access to the lateral skull base including areas such as Meckel's cave. This approach has been well documented, however, few studies have outlined transantral specific access to Meckel's. A transantral approach provides a direct pathway to this region obviating the need for extensive endonasal and transsphenoidal resection. Our aim in this study is to compare the anatomical perspectives obtained in endonasal and transantral approaches. We prepared 14 cadaveric specimens with intravascular injections of colored latex. Eight cadavers underwent endoscopic endonasal transpterygoid approaches to Meckel's cave. Six additional specimens underwent an endoscopic transantral approach to the same region. Photographic evidence was obtained for review. 30 CT scans were analyzed to measure comparative distances to Meckel's cave for both approaches. The endoscopic approaches provided a direct access to the anterior and inferior portions of Meckel's cave. However, the transantral approach required shorter instrumentation, and did not require clearing of the endonasal corridor. This approach gave an anterior view of Meckel's cave making posterior dissection more difficult. A transantral approach to Meckel's cave provides access similar to the endonasal approach with minimal invasiveness. Some of the morbidity associated with extensive endonasal resection could possibly be avoided. Better understanding of the complex skull base anatomy, from different perspectives, helps to improve current endoscopic skull base surgery and to develop new alternatives, consequently, leading to improvements in safety and efficacy.

An implicit dispersive transport algorithm for the US Geological Survey MOC3D solute-transport model

USGS Publications Warehouse

Kipp, K.L.; Konikow, Leonard F.; Hornberger, G.Z.

1998-01-01

This report documents an extension to the U.S. Geological Survey MOC3D transport model that incorporates an implicit-in-time difference approximation for the dispersive transport equation, including source/sink terms. The original MOC3D transport model (Version 1) uses the method of characteristics to solve the transport equation on the basis of the velocity field. The original MOC3D solution algorithm incorporates particle tracking to represent advective processes and an explicit finite-difference formulation to calculate dispersive fluxes. The new implicit procedure eliminates several stability criteria required for the previous explicit formulation. This allows much larger transport time increments to be used in dispersion-dominated problems. The decoupling of advective and dispersive transport in MOC3D, however, is unchanged. With the implicit extension, the MOC3D model is upgraded to Version 2. A description of the numerical method of the implicit dispersion calculation, the data-input requirements and output options, and the results of simulator testing and evaluation are presented. Version 2 of MOC3D was evaluated for the same set of problems used for verification of Version 1. These test results indicate that the implicit calculation of Version 2 matches the accuracy of Version 1, yet is more efficient than the explicit calculation for transport problems that are characterized by a grid Peclet number less than about 1.0.

Recent field experiences with Bacillus thuringiensis in Canada and research needs

Treesearch

Oswald N. Morris

1985-01-01

The CANUSA working group on the use of B.t. against the spruce budworm has prepared a document entitled "Guidelines for the operational use of Bacillus thuringiensis (B.t.) against the spruce budworm" following six years of extensive cooperative field trials in Canada and the U.S.A. (Morris et al 1984). The document summarized below (Table...

Using XML to Separate Content from the Presentation Software in eLearning Applications

ERIC Educational Resources Information Center

Merrill, Paul F.

2005-01-01

This paper has shown how XML (extensible Markup Language) can be used to mark up content. Since XML documents, with meaningful tags, can be interpreted easily by humans as well as computers, they are ideal for the interchange of information. Because XML tags can be defined by an individual or organization, XML documents have proven useful in a…

STS-65 Earth observation of Omo River Delta, Lake Turkana in Ethiopia / Kenya

NASA Technical Reports Server (NTRS)

1994-01-01

STS-65 Earth observation taken aboard Columbia, Orbiter Vehicle (OV) 102, is of Omo River Delta and Lake Turkana in Ethiopia / Kenya. The Omo Delta at the north end of Lake Turkana (Rudolph) is one of the long-term environmental study sites of the Space Shuttle program. The environmental interest in this instance is the documentation of the delta's extension into the lake. This delta extension, or aggradation, is felt to be the result of large-scale soil erosion in the recently deforested areas of Ethiopia in the watershed of the Omo River. Using digitized, rectified, machine-classified, and mensurated NASA photography, it has been determined that the Omo Delta has increased in area by approximately 400% to about 1,800 square kilometers since it was first photographed during the Gemini program in 1965. This photograph documents the long-term and increasing turbidity of Lake Turkana and the continuing delta extension southward by both the northwest and northeast distributaries of the Om

Authentication, integrity, and confidentiality in DICOM-structured reporting: concept and implementation

NASA Astrophysics Data System (ADS)

Riesmeier, Joerg; Eichelberg, Marco; Kleber, Klaus; Groenemeyer, Dietrich H.; Oosterwijk, Herman J.; Jensch, Peter F.

2002-05-01

With the release of 'DICOM Structured Reporting' (SR) as an official extension of the standard about two years ago, DICOM has entered a new domain that is only indirectly related to medical imaging. Basically, DICOM SR is a general model allowing to encode medical reports in a structured manner in DICOM's tag-based format. Therefore, the existing DICOM infrastructure can be used to archive and communicate structured reports, with only relatively small changes to existing systems. As a consequence of the introduction of medical reports in a digital form, the relevance of security measures increases significantly. We have developed a prototype implementation of DICOM structured reporting together with the new security extensions for secure transport connections and digital signatures. The application allows to create, read and modify any SR document, to digitally sign an SR document in whole or part and to transmit such documents over a network. While the secure transport connection protects data from modifications or unauthorized access only during transmission, digital signatures provide a lifetime integrity check and, therefore, maintain the legal document status of structured reports. The application has been successfully demonstrated at RSNA 2000 and ECR 2001, and is freely available on the Internet.

Public-Private Policy Change and Its Influence on the Linkage of Agricultural Research, Extension and Farmers in Iran

ERIC Educational Resources Information Center

Karamidehkordi, Esmail

2013-01-01

Purpose: This article aims to show the linkage of Iranian agricultural research centres with extension and farmers, using three case studies in 1999, 2005 and 2010. Design/methodology/approach: The data were collected through document analyses, structured and semi-structured interviews and observations. Findings: The 1999 and 2005 cases were…

The Lowells of Boston and the Founding of University Extension at Harvard

ERIC Educational Resources Information Center

Shinagel, Michael

2009-01-01

In this article, the author uses the occasion of the centennial of University Extension at Harvard to document how this unique educational institution came into being and why it became associated with Harvard University. He traces the prominent role played by the Lowell family in establishing the Lowell Institute of Boston in the late 1830s and…

Exploring the Level of Evidence of Impact Collected through Program Evaluation by Cooperative Extension as Published in the "Journal of Extension"

ERIC Educational Resources Information Center

Workman, Jeffrey Dale

2010-01-01

Documenting evidence of impact demonstrates that organizations and programs are making a difference and/or accomplishing something positive. The results of a program must ultimately change people's attitudes or behavior, or benefit society in other ways (Diem, 1997). As competition increases and the availability of financial resources decreases,…

Appendices to the model description document for a computer program for the emulation/simulation of a space station environmental control and life support system

NASA Technical Reports Server (NTRS)

Yanosy, James L.

1988-01-01

A Model Description Document for the Emulation Simulation Computer Model was already published. The model consisted of a detailed model (emulation) of a SAWD CO2 removal subsystem which operated with much less detailed (simulation) models of a cabin, crew, and condensing and sensible heat exchangers. The purpose was to explore the utility of such an emulation simulation combination in the design, development, and test of a piece of ARS hardware, SAWD. Extensions to this original effort are presented. The first extension is an update of the model to reflect changes in the SAWD control logic which resulted from test. Also, slight changes were also made to the SAWD model to permit restarting and to improve the iteration technique. The second extension is the development of simulation models for more pieces of air and water processing equipment. Models are presented for: EDC, Molecular Sieve, Bosch, Sabatier, a new condensing heat exchanger, SPE, SFWES, Catalytic Oxidizer, and multifiltration. The third extension is to create two system simulations using these models. The first system presented consists of one air and one water processing system. The second consists of a potential air revitalization system.

78 FR 13368 - Agency Information Collection Activities: Application for Employment Authorization, Form I-765...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-27

... of total applicants who require English translations of their supporting documents. The percentage of supporting documents for each individual applicant that require translation into English. The time required to find, hire or otherwise obtain translations of supporting documents for immigration benefit...

Hanford Site National Environmental Policy Act (NEPA) Characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duncan, Joanne P.; Burk, Kenneth W.; Chamness, Mickie A.

2007-09-27

This document describes the U.S. Department of Energy’s (DOE) Hanford Site environment. It is intended to provide a consistent description of the Hanford Site for the many environmental documents being prepared by DOE contractors concerning the National Environmental Policy Act (NEPA). No statements regarding significance or environmental consequences are provided. This year’s report is the eighteen revision of the original document published in 1988 and is (until replaced by the nineteenth revision) the only version that is relevant for use in the preparation of Hanford NEPA, State Environmental Policy Act (SEPA), and Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA)more » documents. Two chapters are included in this document (Chapters 4 and 6), numbered to correspond to chapters typically presented in environmental impact statements (EISs) and other Hanford Site NEPA or CERCLA documentation. Chapter 4.0 (Affected Environment) describes Hanford Site climate and meteorology; air quality; geology; hydrology; ecology; cultural, archaeological, and historical resources; socioeconomics; noise; and occupational health and safety. Sources for extensive tabular data related to these topics are provided in the chapter. When possible, subjects are divided into a general description of the characteristics of the Hanford Site, followed by site-specific information, where available, for the 100, 200, 300 and other areas. This division allows the reader to go directly to those sections of particular interest. When specific information on each of these separate areas is not complete or available, the general Hanford Site description should be used. Chapter 6.0 (Statutory and Regulatory Requirements) describes federal and state laws and regulations, DOE directives and permits, and presidential executive orders that are applicable to NEPA documents prepared for Hanford Site activities. Information in Chapter 6 can be adapted and supplemented with specific information covering statutory and regulatory requirements for use in an environmental assessment or environmental impact statement. When preparing environmental assessments and EISs, authors should consult Recommendations for the Preparation of Environmental Assessments and Environmental Impact Statements published by the DOE Office of NEPA Oversight (DOE 2004). Additional direction and guidance on the preparation of DOE NEPA documents can be found at http://tis.eh.doe.gov/nepa/guidance.html. Individuals seeking baseline data on the Hanford Site and its past activities may also use the information contained in this document to evaluate projected activities and their impacts. Pacific Northwest National Laboratory (PNNL) staff prepared individual sections of this document, with input from other Hanford Site contractors with the best available information through May 2007. More detailed data are available from reference sources cited or from the authors. For this 2007 revision, the following sections of the document were reviewed by the authors and updated with the best available information through May 2005: Climate and Meteorology Air Quality Geology – Seismicity section only Hydrology – Flow charts for the Columbia and Yakima rivers only Ecology – Threatened and Endangered Species subsection only Socioeconomics Occupational Safety All of Chapter 6.« less

23 CFR 1340.5 - Documentation requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE § 1340.5 Documentation requirements. All sample design, data collection, and estimation procedures used in State surveys conducted in accordance with this part must be well documented. At a minimum, the documentation must: (a) For sample design— (1) Define all...

23 CFR 1340.5 - Documentation requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE § 1340.5 Documentation requirements. All sample design, data collection, and estimation procedures used in State surveys conducted in accordance with this part must be well documented. At a minimum, the documentation must: (a) For sample design— (1) Define all...

Risk-adapted monitoring is not inferior to extensive on-site monitoring: Results of the ADAMON cluster-randomised study.

PubMed

Brosteanu, Oana; Schwarz, Gabriele; Houben, Peggy; Paulus, Ursula; Strenge-Hesse, Anke; Zettelmeyer, Ulrike; Schneider, Anja; Hasenclever, Dirk

2017-12-01

Background According to Good Clinical Practice, clinical trials must protect rights and safety of patients and make sure that the trial results are valid and interpretable. Monitoring on-site has an important role in achieving these objectives; it controls trial conduct at trial sites and informs the sponsor on systematic problems. In the past, extensive on-site monitoring with a particular focus on formal source data verification often lost sight of systematic problems in study procedures that endanger Good Clinical Practice objectives. ADAMON is a prospective, stratified, cluster-randomised, controlled study comparing extensive on-site monitoring with risk-adapted monitoring according to a previously published approach. Methods In all, 213 sites from 11 academic trials were cluster-randomised between extensive on-site monitoring (104) and risk-adapted monitoring (109). Independent post-trial audits using structured manuals were performed to determine the frequency of major Good Clinical Practice findings at the patient level. The primary outcome measure is the proportion of audited patients with at least one major audit finding. Analysis relies on logistic regression incorporating trial and monitoring arm as fixed effects and site as random effect. The hypothesis was that risk-adapted monitoring is non-inferior to extensive on-site monitoring with a non-inferiority margin of 0.60 (logit scale). Results Average number of monitoring visits and time spent on-site was 2.1 and 2.7 times higher in extensive on-site monitoring than in risk-adapted monitoring, respectively. A total of 156 (extensive on-site monitoring: 76; risk-adapted monitoring: 80) sites were audited. In 996 of 1618 audited patients, a total of 2456 major audit findings were documented. Depending on the trial, findings were identified in 18%-99% of the audited patients, with no marked monitoring effect in any of the trials. The estimated monitoring effect is -0.04 on the logit scale with two-sided 95% confidence interval (-0.40; 0.33), demonstrating that risk-adapted monitoring is non-inferior to extensive on-site monitoring. At most, extensive on-site monitoring could reduce the frequency of major Good Clinical Practice findings by 8.2% compared with risk-adapted monitoring. Conclusion Compared with risk-adapted monitoring, the potential benefit of extensive on-site monitoring is small relative to overall finding rates, although risk-adapted monitoring requires less than 50% of extensive on-site monitoring resources. Clusters of findings within trials suggest that complicated, overly specific or not properly justified protocol requirements contributed to the overall frequency of findings. Risk-adapted monitoring in only a sample of patients appears sufficient to identify systematic problems in the conduct of clinical trials. Risk-adapted monitoring has a part to play in quality control. However, no monitoring strategy can remedy defects in quality of design. Monitoring should be embedded in a comprehensive quality management approach covering the entire trial lifecycle.

Risk-adapted monitoring is not inferior to extensive on-site monitoring: Results of the ADAMON cluster-randomised study

PubMed Central

Brosteanu, Oana; Schwarz, Gabriele; Houben, Peggy; Paulus, Ursula; Strenge-Hesse, Anke; Zettelmeyer, Ulrike; Schneider, Anja; Hasenclever, Dirk

2017-01-01

Background According to Good Clinical Practice, clinical trials must protect rights and safety of patients and make sure that the trial results are valid and interpretable. Monitoring on-site has an important role in achieving these objectives; it controls trial conduct at trial sites and informs the sponsor on systematic problems. In the past, extensive on-site monitoring with a particular focus on formal source data verification often lost sight of systematic problems in study procedures that endanger Good Clinical Practice objectives. ADAMON is a prospective, stratified, cluster-randomised, controlled study comparing extensive on-site monitoring with risk-adapted monitoring according to a previously published approach. Methods In all, 213 sites from 11 academic trials were cluster-randomised between extensive on-site monitoring (104) and risk-adapted monitoring (109). Independent post-trial audits using structured manuals were performed to determine the frequency of major Good Clinical Practice findings at the patient level. The primary outcome measure is the proportion of audited patients with at least one major audit finding. Analysis relies on logistic regression incorporating trial and monitoring arm as fixed effects and site as random effect. The hypothesis was that risk-adapted monitoring is non-inferior to extensive on-site monitoring with a non-inferiority margin of 0.60 (logit scale). Results Average number of monitoring visits and time spent on-site was 2.1 and 2.7 times higher in extensive on-site monitoring than in risk-adapted monitoring, respectively. A total of 156 (extensive on-site monitoring: 76; risk-adapted monitoring: 80) sites were audited. In 996 of 1618 audited patients, a total of 2456 major audit findings were documented. Depending on the trial, findings were identified in 18%–99% of the audited patients, with no marked monitoring effect in any of the trials. The estimated monitoring effect is −0.04 on the logit scale with two-sided 95% confidence interval (−0.40; 0.33), demonstrating that risk-adapted monitoring is non-inferior to extensive on-site monitoring. At most, extensive on-site monitoring could reduce the frequency of major Good Clinical Practice findings by 8.2% compared with risk-adapted monitoring. Conclusion Compared with risk-adapted monitoring, the potential benefit of extensive on-site monitoring is small relative to overall finding rates, although risk-adapted monitoring requires less than 50% of extensive on-site monitoring resources. Clusters of findings within trials suggest that complicated, overly specific or not properly justified protocol requirements contributed to the overall frequency of findings. Risk-adapted monitoring in only a sample of patients appears sufficient to identify systematic problems in the conduct of clinical trials. Risk-adapted monitoring has a part to play in quality control. However, no monitoring strategy can remedy defects in quality of design. Monitoring should be embedded in a comprehensive quality management approach covering the entire trial lifecycle. PMID:28786330

Monitored Geologic Repository Project Description Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

P. M. Curry

2001-01-30

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing formore » the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).« less

Electrical, Electronic, and Electromechanical (EEE) parts management and control requirements for NASA space flight programs

NASA Technical Reports Server (NTRS)

1989-01-01

This document establishes electrical, electronic, and electromechanical (EEE) parts management and control requirements for contractors providing and maintaining space flight and mission-essential or critical ground support equipment for NASA space flight programs. Although the text is worded 'the contractor shall,' the requirements are also to be used by NASA Headquarters and field installations for developing program/project parts management and control requirements for in-house and contracted efforts. This document places increased emphasis on parts programs to ensure that reliability and quality are considered through adequate consideration of the selection, control, and application of parts. It is the intent of this document to identify disciplines that can be implemented to obtain reliable parts which meet mission needs. The parts management and control requirements described in this document are to be selectively applied, based on equipment class and mission needs. Individual equipment needs should be evaluated to determine the extent to which each requirement should be implemented on a procurement. Utilization of this document does not preclude the usage of other documents. The entire process of developing and implementing requirements is referred to as 'tailoring' the program for a specific project. Some factors that should be considered in this tailoring process include program phase, equipment category and criticality, equipment complexity, and mission requirements. Parts management and control requirements advocated by this document directly support the concept of 'reliability by design' and are an integral part of system reliability and maintainability. Achieving the required availability and mission success objectives during operation depends on the attention given reliability and maintainability in the design phase. Consequently, it is intended that the requirements described in this document are consistent with those of NASA publications, 'Reliability Program Requirements for Aeronautical and Space System Contractors,' NHB 5300.4(1A-l); 'Maintainability Program Requirements for Space Systems,' NHB 5300.4(1E); and 'Quality Program Provisions for Aeronautical and Space System Contractors,' NHB 5300.4(1B).

Advanced distributed simulation technology: Digital Voice Gateway Reference Guide

NASA Astrophysics Data System (ADS)

Vanhook, Dan; Stadler, Ed

1994-01-01

The Digital Voice Gateway (referred to as the 'DVG' in this document) transmits and receives four full duplex encoded speech channels over the Ethernet. The information in this document applies only to DVG's running firmware of the version listed on the title page. This document, previously named Digital Voice Gateway Reference Guide, BBN Systems and Technologies Corporation, Cambridge, MA 02138, was revised for revision 2.00. This new revision changes the network protocol used by the DVG, to comply with the SINCGARS radio simulation (For SIMNET 6.6.1). Because of the extensive changes to revision 2.00 a separate document was created rather than supplying change pages.

76 FR 5537 - Electronic On-Board Recorders and Hours of Service Supporting Documents

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-01

...The Federal Motor Carrier Safety Administration (FMCSA) proposes to amend the Federal Motor Carrier Safety Regulations (FMCSRs) to require certain motor carriers operating commercial motor vehicles (CMVs) in interstate commerce to use electronic on-board recorders (EOBRs) to document their drivers' hours of service (HOS). Under this proposal, all motor carriers currently required to maintain Records of Duty Status (RODS) for HOS recordkeeping would be required to use EOBRs to systematically and effectively monitor their drivers' compliance with HOS requirements. Additionally, this proposal sets forth the supporting documents that all motor carriers currently required to use RODS would still be required to obtain and keep, as required by section 113(a) of the Hazardous Materials Transportation Authorization Act (HMTAA). It explains, however, that although motor carriers subject to the proposed EOBR requirements would still need to retain some supporting documents, they would be relieved of the requirements to retain supporting documents to verify driving time. FMCSA also proposes to require all motor carriers--both RODS and timecard users--to systematically monitor their drivers' compliance with HOS requirements. Motor carriers would be given 3 years after the effective date of the final rule to comply with these requirements.

78 FR 40758 - Agency Information Collection Activities: Application for Temporary Protected Status, Form I-821...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-08

... applicants who require English translations of their supporting documents. The percentage of supporting documents for each individual applicant that require translation into English. The time required to find, hire, or otherwise obtain translations of supporting documents for immigration benefit requests. The...

19 CFR 122.157 - Documents required for clearance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Documents required for clearance. 122.157 Section 122.157 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Flights to and From Cuba § 122.157 Documents required for...

Ten years of marketing approvals of anticancer drugs in Europe: regulatory policy and guidance documents need to find a balance between different pressures

PubMed Central

Apolone, G; Joppi, R; Bertele', V; Garattini, S

2005-01-01

Despite important progress in understanding the molecular factors underlying the development of cancer and the improvement in response rates with new drugs, long-term survival is still disappointing for most common solid tumours. This might be because very little of the modest gain for patients is the result of the new compounds discovered and marketed recently. An assessment of the regulatory agencies' performance may suggest improvements. The present analysis summarizes and evaluates the type of studies and end points used by the EMEA to approve new anticancer drugs, and discusses the application of current regulations. This report is based on the information available on the EMEA web site. We identified current regulatory requirements for anticancer drugs promulgated by the agency and retrieved them in the relevant directory; information about empirical evidence supporting the approval of drugs for solid cancers through the centralised procedure were retrieved from the European Public Assessment Report (EPAR). We surveyed documents for drug applications and later extensions from January 1995, when EMEA was set up, to December 2004. We identified 14 anticancer drugs for 27 different indications (14 new applications and 13 extensions). Overall, 48 clinical studies were used as the basis for approval; randomised comparative (clinical) trial (RCT) and Response Rate were the study design and end points most frequently adopted (respectively, 25 out of 48 and 30 out of 48). In 13 cases, the EPAR explicitly reported differences between arms in terms of survival: the range was 0–3.7 months, and the mean and median differences were 1.5 and 1.2 months. The majority of studies (13 out of 27, 48%) involved the evaluation of complete and/or partial tumour responses, with regard to the end points supporting the 27 indications. Despite the recommendations of the current EMEA guidance documents, new anticancer agents are still often approved on the basis of small single arm trials that do not allow any assessment of an ‘acceptable and extensively documented toxicity profile' and of end points such as response rate, time to progression or progression-free survival which at best can be considered indicators of anticancer activity and are not ‘justified surrogate markers for clinical benefit'. Anticipating an earlier than ideal point along the drug approval path and the use of not fully validated surrogate end points in nonrandomised trials looks like a dangerous shortcut that might jeopardise consumers' health, leading to unsafe and ineffective drugs being marketed and prescribed. The present Note for Guidance for new anticancer agents needs revising. Drugs must be rapidly released for patients who need them but not be at the expense of adequate knowledge about the real benefit of the drugs. PMID:16136026

Ten years of marketing approvals of anticancer drugs in Europe: regulatory policy and guidance documents need to find a balance between different pressures.

PubMed

Apolone, G; Joppi, R; Bertele', V; Garattini, S

2005-09-05

Despite important progress in understanding the molecular factors underlying the development of cancer and the improvement in response rates with new drugs, long-term survival is still disappointing for most common solid tumours. This might be because very little of the modest gain for patients is the result of the new compounds discovered and marketed recently. An assessment of the regulatory agencies' performance may suggest improvements. The present analysis summarizes and evaluates the type of studies and end points used by the EMEA to approve new anticancer drugs, and discusses the application of current regulations. This report is based on the information available on the EMEA web site. We identified current regulatory requirements for anticancer drugs promulgated by the agency and retrieved them in the relevant directory; information about empirical evidence supporting the approval of drugs for solid cancers through the centralised procedure were retrieved from the European Public Assessment Report (EPAR). We surveyed documents for drug applications and later extensions from January 1995, when EMEA was set up, to December 2004. We identified 14 anticancer drugs for 27 different indications (14 new applications and 13 extensions). Overall, 48 clinical studies were used as the basis for approval; randomised comparative (clinical) trial (RCT) and Response Rate were the study design and end points most frequently adopted (respectively, 25 out of 48 and 30 out of 48). In 13 cases, the EPAR explicitly reported differences between arms in terms of survival: the range was 0-3.7 months, and the mean and median differences were 1.5 and 1.2 months. The majority of studies (13 out of 27, 48%) involved the evaluation of complete and/or partial tumour responses, with regard to the end points supporting the 27 indications. Despite the recommendations of the current EMEA guidance documents, new anticancer agents are still often approved on the basis of small single arm trials that do not allow any assessment of an 'acceptable and extensively documented toxicity profile' and of end points such as response rate, time to progression or progression-free survival which at best can be considered indicators of anticancer activity and are not 'justified surrogate markers for clinical benefit'. Anticipating an earlier than ideal point along the drug approval path and the use of not fully validated surrogate end points in nonrandomised trials looks like a dangerous shortcut that might jeopardise consumers' health, leading to unsafe and ineffective drugs being marketed and prescribed. The present Note for Guidance for new anticancer agents needs revising. Drugs must be rapidly released for patients who need them but not be at the expense of adequate knowledge about the real benefit of the drugs.

Home Energy Saver

Science.gov Websites

(heating, cooling, water heating, major appliances, small appliances, and lighting) are included. HES ;black box"-we extensively document all methodologies and assumptions. Users begin their exploration

XML at the ADC: Steps to a Next Generation Data Archive

NASA Astrophysics Data System (ADS)

Shaya, E.; Blackwell, J.; Gass, J.; Oliversen, N.; Schneider, G.; Thomas, B.; Cheung, C.; White, R. A.

1999-05-01

The eXtensible Markup Language (XML) is a document markup language that allows users to specify their own tags, to create hierarchical structures to qualify their data, and to support automatic checking of documents for structural validity. It is being intensively supported by nearly every major corporate software developer. Under the funds of a NASA AISRP proposal, the Astronomical Data Center (ADC, http://adc.gsfc.nasa.gov) is developing an infrastructure for importation, enhancement, and distribution of data and metadata using XML as the document markup language. We discuss the preliminary Document Type Definition (DTD, at http://adc.gsfc.nasa.gov/xml) which specifies the elements and their attributes in our metadata documents. This attempts to define both the metadata of an astronomical catalog and the `header' information of an astronomical table. In addition, we give an overview of the planned flow of data through automated pipelines from authors and journal presses into our XML archive and retrieval through the web via the XML-QL Query Language and eXtensible Style Language (XSL) scripts. When completed, the catalogs and journal tables at the ADC will be tightly hyperlinked to enhance data discovery. In addition one will be able to search on fragmentary information. For instance, one could query for a table by entering that the second author is so-and-so or that the third author is at such-and-such institution.

Tutorial and hands-on demonstration of a fluent interpreter for CARE 3

NASA Technical Reports Server (NTRS)

Martensen, Anna L.; Bavuso, Salvatore J.

1987-01-01

This document updates one originally written as part of a workshop on the CARE 3 capability held at NASA Langley Research Center on February 22 to 24, 1984. Subsequent to the workshop, CARE 3 and its interface program were enhanced and extensive changes to the original document became necessary. This document, like its predecessor, is designed to illustrate the user interface capability and the salient CARE 3 features by describing various examples of reliability models and their solutions through the use of CARE 3.

Automated software system for checking the structure and format of ACM SIG documents

NASA Astrophysics Data System (ADS)

Mirza, Arsalan Rahman; Sah, Melike

2017-04-01

Microsoft (MS) Office Word is one of the most commonly used software tools for creating documents. MS Word 2007 and above uses XML to represent the structure of MS Word documents. Metadata about the documents are automatically created using Office Open XML (OOXML) syntax. We develop a new framework, which is called ADFCS (Automated Document Format Checking System) that takes the advantage of the OOXML metadata, in order to extract semantic information from MS Office Word documents. In particular, we develop a new ontology for Association for Computing Machinery (ACM) Special Interested Group (SIG) documents for representing the structure and format of these documents by using OWL (Web Ontology Language). Then, the metadata is extracted automatically in RDF (Resource Description Framework) according to this ontology using the developed software. Finally, we generate extensive rules in order to infer whether the documents are formatted according to ACM SIG standards. This paper, introduces ACM SIG ontology, metadata extraction process, inference engine, ADFCS online user interface, system evaluation and user study evaluations.

10 CFR 95.37 - Classification and preparation of documents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... classification decisions. (c) Markings required on face of documents. (1) For derivative classification of... to a document must be placed in a conspicuous fashion in letters at the top and bottom of the outside... on the face of the document: Reproduction or Further Dissemination Requires Approval of If any...

10 CFR 95.37 - Classification and preparation of documents.

Code of Federal Regulations, 2011 CFR

2011-01-01

... classification decisions. (c) Markings required on face of documents. (1) For derivative classification of... to a document must be placed in a conspicuous fashion in letters at the top and bottom of the outside... on the face of the document: Reproduction or Further Dissemination Requires Approval of If any...

Hanford tanks initiative (HTI) configuration management desk instruction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schaus, P.S., Fluor Daniel Hanford

The purpose of the document is to provide working level directions for submitting requirements, making changes to the requirements database, and entering Project documentation into the HTI Project information and document management system.

AEDT Software Requirements Documents - Draft

DOT National Transportation Integrated Search

2007-01-25

This software requirements document serves as the basis for designing and testing the Aviation Environmental Design Tool (AEDT) software. The intended audience for this document consists of the following groups: the AEDT designers, developers, and te...

Acceptance of Cloud Services in Face-to-Face Computer-Supported Collaborative Learning: A Comparison between Single-User Mode and Multi-User Mode

ERIC Educational Resources Information Center

Wang, Chia-Sui; Huang, Yong-Ming

2016-01-01

Face-to-face computer-supported collaborative learning (CSCL) was used extensively to facilitate learning in classrooms. Cloud services not only allow a single user to edit a document, but they also enable multiple users to simultaneously edit a shared document. However, few researchers have compared student acceptance of such services in…

Econ's optimal decision model of wheat production and distribution-documentation

NASA Technical Reports Server (NTRS)

1977-01-01

The report documents the computer programs written to implement the ECON optical decision model. The programs were written in APL, an extremely compact and powerful language particularly well suited to this model, which makes extensive use of matrix manipulations. The algorithms used are presented and listings of and descriptive information on the APL programs used are given. Possible changes in input data are also given.

Extensive calvarial tuberculosis: rare complication of tuberculous mastoiditis.

PubMed

Thandar, M A; Fagan, J J; Garb, M

2004-01-01

Tuberculous mastoiditis is a well-documented entity with decreasing incidence in recent years. Tuberculous osteitis of the skull is even rarer. The case of a 58-year-old male with tuberculous mastoiditis complicated by extensive tuberculous osteitis of the skull is presented. This case serves to demonstrate both the difficulty in establishing the diagnosis of tuberculosis and the potentially disastrous consequences of the disease.

TMATS/ IHAL/ DDML Schema Validation

DTIC Science & Technology

2017-02-01

task was to create a method for performing IRIG eXtensible Markup Language (XML) schema validation. As opposed to XML instance document validation...TMATS / IHAL / DDML Schema Validation, RCC 126-17, February 2017 vii Acronyms DDML Data Display Markup Language HUD heads-up display iNET...system XML eXtensible Markup Language TMATS / IHAL / DDML Schema Validation, RCC 126-17, February 2017 viii This page intentionally left blank

26 CFR 31.6081(a)-1 - Extensions of time for filing returns and other documents.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Retirment Tax Act will be granted. (2) Information returns of employers on Forms W-2 and W-3—In general. The Commissioner may grant an extension of time in which to file the Social Security Administration copy of Forms W-2 and the accompanying transmittal form which constitutes an information return under § 31.6051-2(a...

26 CFR 31.6081(a)-1 - Extensions of time for filing returns and other documents.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Retirment Tax Act will be granted. (2) Information returns of employers on Forms W-2 and W-3—In general. The Commissioner may grant an extension of time in which to file the Social Security Administration copy of Forms W-2 and the accompanying transmittal form which constitutes an information return under § 31.6051-2(a...

26 CFR 31.6081(a)-1 - Extensions of time for filing returns and other documents.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Retirment Tax Act will be granted. (2) Information returns of employers on Forms W-2 and W-3—In general. The Commissioner may grant an extension of time in which to file the Social Security Administration copy of Forms W-2 and the accompanying transmittal form which constitutes an information return under § 31.6051-2(a...

26 CFR 31.6081(a)-1 - Extensions of time for filing returns and other documents.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Retirment Tax Act will be granted. (2) Information returns of employers on Forms W-2 and W-3—In general. The Commissioner may grant an extension of time in which to file the Social Security Administration copy of Forms W-2 and the accompanying transmittal form which constitutes an information return under § 31.6051-2(a...

High-level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 7. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burt, D.L.

1994-04-01

The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Identification Document (S/RID) is contained in multiple volumes. This document (Volume 7) presents the standards and requirements for the following sections: Occupational Safety and Health, and Environmental Protection.

7 CFR 1.613 - What are the requirements for service of documents?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 1 2010-01-01 2010-01-01 false What are the requirements for service of documents? 1.613 Section 1.613 Agriculture Office of the Secretary of Agriculture ADMINISTRATIVE REGULATIONS Conditions in FERC Hydropower Licenses Document Filing and Service § 1.613 What are the requirements for...

Portuguese food composition database quality management system.

PubMed

Oliveira, L M; Castanheira, I P; Dantas, M A; Porto, A A; Calhau, M A

2010-11-01

The harmonisation of food composition databases (FCDB) has been a recognised need among users, producers and stakeholders of food composition data (FCD). To reach harmonisation of FCDBs among the national compiler partners, the European Food Information Resource (EuroFIR) Network of Excellence set up a series of guidelines and quality requirements, together with recommendations to implement quality management systems (QMS) in FCDBs. The Portuguese National Institute of Health (INSA) is the national FCDB compiler in Portugal and is also a EuroFIR partner. INSA's QMS complies with ISO/IEC (International Organization for Standardisation/International Electrotechnical Commission) 17025 requirements. The purpose of this work is to report on the strategy used and progress made for extending INSA's QMS to the Portuguese FCDB in alignment with EuroFIR guidelines. A stepwise approach was used to extend INSA's QMS to the Portuguese FCDB. The approach included selection of reference standards and guides and the collection of relevant quality documents directly or indirectly related to the compilation process; selection of the adequate quality requirements; assessment of adequacy and level of requirement implementation in the current INSA's QMS; implementation of the selected requirements; and EuroFIR's preassessment 'pilot' auditing. The strategy used to design and implement the extension of INSA's QMS to the Portuguese FCDB is reported in this paper. The QMS elements have been established by consensus. ISO/IEC 17025 management requirements (except 4.5) and 5.2 technical requirements, as well as all EuroFIR requirements (including technical guidelines, FCD compilation flowchart and standard operating procedures), have been selected for implementation. The results indicate that the quality management requirements of ISO/IEC 17025 in place in INSA fit the needs for document control, audits, contract review, non-conformity work and corrective actions, and users' (customers') comments, complaints and satisfaction, with minor adaptation. Implementation of the FCDB QMS proved to be a way of reducing the subjectivity of the compilation process and fully documenting it, and also facilitates training of new compilers. Furthermore, it has strengthened cooperation and trust among FCDB actors, as all of them were called to be involved in the process. On the basis of our practical results, we can conclude that ISO/IEC 17025 management requirements are an adequate reference for the implementation of INSA's FCDB QMS with the advantages of being well known to all members of staff and also being a common quality language among laboratories producing FCD. Combining quality systems and food composition activities endows the FCDB compilation process with flexibility, consistency and transparency, and facilitates its monitoring and assessment, providing the basis for strengthening confidence among users, data producers and compilers.

EnergyPlus Graphical User Interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

2011-01-04

LBNL, Infosys Technologies and Digital Alchemy are developing a free, comprehensive graphical user interface (GUI) that will enable EnergyPlus to be used more easily and effectively by building designers and other professionals, facilitating its widespread adoption. User requirements have been defined through a series of practitioner workshops. A new schematic editor for HVAC systems will be combined with different building envelope geometry generation tools and IFC-based BIM import and export. LBNL and Digital Alchemy have generated a detailed function requirements specification, which is being implemented in software by Infosys, LBNL and and Digital Alchemy. LBNL and practitioner subcontractors will developmore » a comprehensive set of templates and libraries and will perform extensive testing of the GUI before it is released in Q3 2011. It is planned to use an Open Platfom approach, in which a comprehensive set of well documented Application Programming Interfaces (API's) would be provided to facilitate both the development of third party contributions to the official, standard GUI and the development of derivative works.« less

Natural thorium resources and recovery: Options and impacts

USGS Publications Warehouse

Ault, Timothy; Van Gosen, Bradley S.; Krahn, Steven; Croff, Allen

2016-01-01

This paper reviews the front end of the thorium fuel cycle, including the extent and variety of thorium deposits, the potential sources of thorium production, and the physical and chemical technologies required to isolate and purify thorium. Thorium is frequently found within rare earth element–bearing minerals that exist in diverse types of mineral deposits, often in conjunction with other minerals mined for their commercial value. It may be possible to recover substantial quantities of thorium as a by-product from active titanium, uranium, tin, iron, and rare earth mines. Incremental physical and chemical processing is required to obtain a purified thorium product from thorium minerals, but documented experience with these processes is extensive, and incorporating thorium recovery should not be overly challenging. The anticipated environmental impacts of by-product thorium recovery are small relative to those of uranium recovery since existing mining infrastructure utilization avoids the opening and operation of new mines and thorium recovery removes radionuclides from the mining tailings.

Evaluation of ISO EN 13606 as a result of its implementation in XML

PubMed Central

Sun, Shanghua; Hassan, Taher; Kalra, Dipak

2013-01-01

The five parts of the ISO EN 13606 standard define a means by which health-care records can be exchanged between computer systems. Starting within the European standardisation process, it has now become internationally ratified in ISO. However, ISO standards do not require that a reference implementation be provided, and in order for ISO EN 13606 to deliver the expected benefits, it must be provided not as a document, but as an operational system that is not vendor specific. This article describes the evolution of an Extensible Markup Language (XML) Schema through three iterations, each of which emphasised one particular approach to delivering an executable equivalent to the printed standard. Developing these operational versions and incorporating feedback from users of these demonstrated where implementation compromises were needed and exposed defects in the standard. These are discussed herein. They may require a future technical revision to ISO EN 13606 to resolve the issues identified. PMID:23995217

Extended performance solar electric propulsion thrust system study. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Poeschel, R. L.; Hawthorne, E. I.

1977-01-01

Several thrust system design concepts were evaluated and compared using the specifications of the most advanced 30 cm engineering model thruster as the technology base. The extensions in thruster performance required for the Halley's comet mission were defined and alternative thrust system concepts were designed. Confirmation testing and analysis of thruster and power-processing components were performed, and the feasibility of satisfying extended performance requirements was verified. A baseline design was selected from the alternatives considered, and the design analysis and documentation were refined. A program development plan was formulated that outlines the work structure considered necessary for developing, qualifying, and fabricating the flight hardware for the baseline thrust system within the time frame of a project to rendezvous with Halley's comet. An assessment was made of the costs and risks associated with a baseline thrust system as provided to the mission project under this plan. Critical procurements and interfaces were identified and defined. Results are presented.

Speed enforcement in China: National, provincial and city initiatives and their success.

PubMed

He, Jie; King, Mark; Watson, Barry; Rakotonirainy, Andry; Fleiter, Judy

2013-01-01

China is motorizing rapidly, with associated urban road development and extensive construction of motorways. Speeding accounts for about 10% of fatalities, which represents a large decrease from a peak of 17.2% in 2004. Speeding has been addressed at a national level through the introduction of laws and procedural requirements in 2004, in provinces either across all road types or on motorways, and at city level. Typically, documentation of speed enforcement programmes has taken place when new technology (i.e. speed cameras) is introduced, and it is likely that many programmes have not been documented or widely reported. In particular, the national legislation of 2004 and its implementation was associated with a large reduction in fatalities attributed to speeding. In Guangdong Province, after using speed detection equipment, motorway fatalities due to speeding in 2005 decreased by 32.5% comparing with 2004. In Beijing, the number of traffic monitoring units which were used to photograph illegal traffic activities such as traffic light violations, speeding and using bus lanes illegally increased to 1958 by April 1, 2009, and in the future such automated enforcement will become the main means of enforcement, expected to account for 60% of all traffic enforcement in Beijing. This paper provides a brief overview of the speeding enforcement programmes in China which have been documented and their successes. Copyright © 2012 Elsevier Ltd. All rights reserved.

LLCEDATA and LLCECALC for Windows version 1.0, Volume 3: Software verification and validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

McFadden, J.G.

1998-09-04

LLCEDATA and LLCECALC for Windows are user-friendly computer software programs that work together to determine the proper waste designation, handling, and disposition requirements for Long Length Contaminated Equipment (LLCE). LLCEDATA reads from a variety of data bases to produce an equipment data file(EDF) that represents a snapshot of both the LLCE and the tank from which it originates. LLCECALC reads the EDF and the gamma assay file (AV2) that is produced by the flexible Receiver Gamma Energy Analysis System. LLCECALC performs corrections to the AV2 file as it is being read and characterizes the LLCE. Both programs produce a varietymore » of reports, including a characterization report and a status report. The status report documents each action taken by the user, LLCEDATA, and LLCECALC. Documentation for LLCEDATA and LLCECALC for Windows is available in three volumes. Volume 1 is a user`s manual, which is intended as a quick reference for both LLCEDATA and LLCECALC. Volume 2 is a technical manual, which discusses system limitations and provides recommendations to the LLCE process. Volume 3 documents LLCEDATA and LLCECALC`s verification and validation. Two of the three installation test cases, from Volume 1, are independently confirmed. Data bases used in LLCEDATA are verified and referenced. Both phases of LLCECALC process gamma and characterization, are extensively tested to verify that the methodology and algorithms used are correct.« less

North Carolina's Implementation of Visibility Impact Assessment Requirements for New Major Stationary Sources and Major Modifications Subject to Clean Air Act Prevention of Significant Deterioration Requirements

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Developing a system to track meaningful outcome measures in head and neck cancer treatment.

PubMed

Walters, Ronald S; Albright, Heidi W; Weber, Randal S; Feeley, Thomas W; Hanna, Ehab Y; Cantor, Scott B; Lewis, Carol M; Burke, Thomas W

2014-02-01

The health care industry, including consumers, providers, and payers of health care, recognize the importance of developing meaningful, patient-centered measures. This article describes our experience using an existing electronic medical record largely based on free text formats without structured documentation, in conjunction with tumor registry abstraction techniques, to obtain and analyze data for use in clinical improvement and public reporting. We performed a retrospective analysis of 2467 previously untreated patients treated with curative intent who presented with laryngeal, pharyngeal, or oral cavity cancer in order to develop a system to monitor and report meaningful outcome metrics of head and neck cancer treatment. Patients treated between 1995 and 2006 were analyzed for the primary outcomes of survival at 1 and 2 years, the ability to speak at 1 year posttreatment, and the ability to swallow at 1 year posttreatment. We encountered significant limitations in clinical documentation because of the lack of standardization of meaningful measures, as well limitations with data abstraction using a retrospective approach to reporting measures. Almost 5000 person-hours were required for data abstraction, quality review, and reporting, at a cost of approximately $134,000. Our multidisciplinary teams document extensive patient information; however, data is not stored in easily accessible formats for measurement, comparison, and reporting. We recommend identifying measures meaningful to patients, providers, and payers to be documented throughout the patients' entire treatment cycle, and significant investment in the improvements to electronic medical records and tumor registry reporting in order to provide meaningful quality measures for the future. Copyright © 2013 Wiley Periodicals, Inc.

Microgravity Experiments Safety and Integration Requirements Document Tree

NASA Technical Reports Server (NTRS)

Hogan, Jean M.

1995-01-01

This report is a document tree of the safety and integration documents required to develop a space experiment. Pertinent document information for each of the top level (tier one) safety and integration documents, and their applicable and reference (tier two) documents has been identified. This information includes: document title, revision level, configuration management, electronic availability, listed applicable and reference documents, source for obtaining the document, and document owner. One of the main conclusions of this report is that no single document tree exists for all safety and integration documents, regardless of the Shuttle carrier. This document also identifies the need for a single point of contact for customers wishing to access documents. The data in this report serves as a valuable information source for the NASA Lewis Research Center Project Documentation Center, as well as for all developers of space experiments.

High level waste storage tank farms/242-A evaporator standards/requirements identification document phase 1 assessment report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biebesheimer, E., Westinghouse Hanford Co.

This document, the Standards/Requirements Identification Document (S/RID) Phase I Assessment Report for the subject facility, represents the results of an Administrative Assessment to determine whether S/RID requirements are fully addressed by existing policies, plans or procedures. It contains; compliance status, remedial actions, and an implementing manuals report linking S/RID elements to requirement source to implementing manual and section.

Transit bus stop pedestrian warning application : requirements document.

DOT National Transportation Integrated Search

2016-08-01

This document describes the System Requirements for the Transit Bus Stop Pedestrian Warning (TSPW) application. The requirements describe the system of interest for the implementation team including the required functions and performance along with t...

17 CFR 4.31 - Required delivery of Disclosure Document to prospective clients.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Disclosure Document to prospective clients. 4.31 Section 4.31 Commodity and Securities Exchanges COMMODITY... Advisors § 4.31 Required delivery of Disclosure Document to prospective clients. (a) Each commodity trading... prospective client a Disclosure Document containing the information set forth in §§ 4.34 and 4.35 for the...

10 CFR 2.304 - Formal requirements for documents; signatures; acceptance for filing.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., and General Hearing Management for NRC Adjudicatory Hearings § 2.304 Formal requirements for documents... section, it may be struck. (1) An electronic document must be signed using a participant's or a... paragraph (d) of this section. (i) When signing an electronic document using a digital ID certificate, the...

10 CFR 2.304 - Formal requirements for documents; signatures; acceptance for filing.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., and General Hearing Management for NRC Adjudicatory Hearings § 2.304 Formal requirements for documents... section, it may be struck. (1) An electronic document must be signed using a participant's or a... paragraph (d) of this section. (i) When signing an electronic document using a digital ID certificate, the...

10 CFR 2.304 - Formal requirements for documents; signatures; acceptance for filing.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Management for NRC Adjudicatory Hearings § 2.304 Formal requirements for documents; signatures; acceptance... section, it may be struck. (1) An electronic document must be signed using a participant's or a... paragraph (d) of this section. (i) When signing an electronic document using a digital ID certificate, the...

10 CFR 2.304 - Formal requirements for documents; signatures; acceptance for filing.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Management for NRC Adjudicatory Hearings § 2.304 Formal requirements for documents; signatures; acceptance... section, it may be struck. (1) An electronic document must be signed using a participant's or a... paragraph (d) of this section. (i) When signing an electronic document using a digital ID certificate, the...

NASA software documentation standard software engineering program

NASA Technical Reports Server (NTRS)

1991-01-01

The NASA Software Documentation Standard (hereinafter referred to as Standard) can be applied to the documentation of all NASA software. This Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. This basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

75 FR 48921 - Administrative Guidance for Multistate Extension Activities and Integrated Research and Extension...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-12

.... Section 105 of AREERA amended the Smith-Lever Act to require that a specified amount of agricultural... Hatch Act and Smith-Lever Act to require that a specified amount of agricultural research and extension... Smith- Lever Act funds on multistate extension activities and 25 percent on integrated research and...

Hanford Site National Environmental Policy Act (NEPA) Characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rohay, A.C.; Fosmire, C.J.; Neitzel, D.A.

1999-09-28

This document describes the US Department of Energy's (DOE) Hanford Site environment. It is updated each year and is intended to provide a consistent description of the Hanford Site environment for the many NEPA documents being prepared by DOE contractors. No conclusions or recommendations are provided. This year's report is the eleventh revision of the original document published in 1988 and is (until replaced by the 12th revision) the only version that is relevant for use in the preparation of Hanford NEPA; SEPA and CERCLA documents. The two chapters included in this document (Chapters 4 and 6) are numbered tomore » correspond to the chapters where such information is presented in environmental impact statements (EISs) and other Site-related NEPA or CERCLA documentation. Chapter 4.0 (Affected Environment) describes Hanford Site climate and meteorology, geology, hydrology, ecology, cultural, archaeological and historical resources, socioeconomic; occupational safety, and noise. Sources for extensive tabular data related to these topics are provided in the chapter. Most subjects are divided into a general description of the characteristics of the Hanford Site, followed by site-specific information, where available, of the 100,200,300, and other Areas. This division allows the reader to go directly to those sections of particular interest. When specific information on each of these separate areas is not complete or available, the general Hanford Site description should be used. Chapter 6.0 (Statutory and Regulatory Requirements) is essentially a definitive NEPA Chapter 6.0, which describes applicable federal and state laws and regulations, DOE directives and permits, and environmental standards directly applicable to the NEPA documents on the Hanford Site. People preparing environmental assessments and EISs should also be cognizant of the document entitled ''Recommendations for the Preparation of Environmental Assessments and Environmental Impact Statements'' published by the DOE Office of NEPA Oversight. Pacific Northwest National Laboratory (PNNL) staff prepared individual sections of this document, with input from other Site contractors. More detailed data are available from reference sources cited or from the authors. The following sections of the document were reviewed by the authors and updated with the best available information through June 1999: Climate and Meteorology; Ecology; Cultural, Archaeological, and Historical Resources; Socioeconomics; and All of Chapter 6.« less

1 CFR 5.2 - Documents required to be filed for public inspection and published.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 1 General Provisions 1 2011-01-01 2011-01-01 false Documents required to be filed for public inspection and published. 5.2 Section 5.2 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER GENERAL § 5.2 Documents required to be filed for public inspection and published...

25 CFR 162.563 - What documents are required for BIA approval of a WSR lease?

Code of Federal Regulations, 2013 CFR

2013-04-01

... WATER LEASES AND PERMITS Wind and Solar Resource Leases Wsr Lease Approval § 162.563 What documents are... authority that the proposed use is in conformance with applicable tribal law, if required by the tribe; (g... applicable Federal and tribal environmental and land use requirements, including any documentation prepared...

25 CFR 162.563 - What documents are required for BIA approval of a WSR lease?

Code of Federal Regulations, 2014 CFR

2014-04-01

... WATER LEASES AND PERMITS Wind and Solar Resource Leases Wsr Lease Approval § 162.563 What documents are... authority that the proposed use is in conformance with applicable tribal law, if required by the tribe; (g... applicable Federal and tribal environmental and land use requirements, including any documentation prepared...

33 CFR 157.118 - Required documents: Foreign tank vessels.

Code of Federal Regulations, 2010 CFR

2010-07-01

... CARRYING OIL IN BULK Crude Oil Washing (COW) System on Tank Vessels General § 157.118 Required documents... having a COW system under § 157.10c(b)(2) shall ensure that the vessel does not enter the navigable...) Evidence that the COW system passed the required inspections by— (i) A document from an authorized CS or...

1 CFR 5.2 - Documents required to be filed for public inspection and published.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 1 General Provisions 1 2013-01-01 2012-01-01 true Documents required to be filed for public inspection and published. 5.2 Section 5.2 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER GENERAL § 5.2 Documents required to be filed for public inspection and published...

1 CFR 5.2 - Documents required to be filed for public inspection and published.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 1 General Provisions 1 2014-01-01 2012-01-01 true Documents required to be filed for public inspection and published. 5.2 Section 5.2 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER GENERAL § 5.2 Documents required to be filed for public inspection and published...

1 CFR 5.2 - Documents required to be filed for public inspection and published.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 1 General Provisions 1 2012-01-01 2012-01-01 false Documents required to be filed for public inspection and published. 5.2 Section 5.2 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER GENERAL § 5.2 Documents required to be filed for public inspection and published...

Project Turnover Deliverables for the SY Farm Enraf Annulus Leak Detectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

SCAIEF, C.C.

2000-09-19

This document identifies the deliverables that ensure the end user of the SY Farm Enraf Annulus Leak Detectors (ALD) has all the documentation and training required for operating and maintaining the new system. All deliverable items checked on the Acceptance For Beneficial Use (ABU) form have been completed and are available to the end user. This document was written as required by HNF-IP-0842, Volume IV section 3.12 Acceptance of Structures, Systems, and Components for Beneficial Use. This document applies to the deliverable documentation required to operate and maintain the SY Farm Enraf ALD System. Appendix A provides a copy ofmore » the ABU form as listed in the appendix of TWR-4092, Engineering Task Plan for the New SY Farm Annulus Leak Detectors. This document attests that all required deliverable items checked on the ABU have been completed and are available to the end user.« less

Requirements Specification Document

DOT National Transportation Integrated Search

1996-04-26

The System Definition Document identifies the top level processes, data flows, : and system controls for the Gary-Chicago-Milwaukee (GCM) Corridor Transportation Information Center (C-TIC). This Requirements Specification establishes the requirements...

Medicare, Medicaid, and Children's Health Insurance Programs: Announcement of the Extension of Temporary Moratoria on Enrollment of Part B Non-Emergency Ground Ambulance Suppliers and Home Health Agencies in Designated Geographic Locations. Extension of temporary moratoria.

PubMed

2017-07-28

This document announces the extension of statewide temporary moratoria on the enrollment of new Medicare Part B non-emergency ground ambulance providers and suppliers and Medicare home health agencies, subunits, and branch locations in Florida, Illinois, Michigan, Texas, Pennsylvania, and New Jersey, as applicable, to prevent and combat fraud, waste, and abuse. This extension also applies to the enrollment of new non-emergency ground ambulance suppliers and home health agencies, subunits, and branch locations in Medicaid and the Children's Health Insurance Program in those states.

Dynamic Analysis of Spur Gear Transmissions (DANST). PC Version 3.00 User Manual

NASA Technical Reports Server (NTRS)

Oswald, Fred B.; Lin, Hsiang Hsi; Delgado, Irebert R.

1996-01-01

DANST is a FORTRAN computer program for static and dynamic analysis of spur gear systems. The program can be used for parametric studies to predict the static transmission error, dynamic load, tooth bending stress and other properties of spur gears as they are influenced by operating speed, torque, stiffness, damping, inertia, and tooth profile. DANST performs geometric modeling and dynamic analysis for low- or high-contact-ratio spur gears. DANST can simulate gear systems with contact ratios ranging from one to three. It was designed to be easy to use and it is extensively documented in several previous reports and by comments in the source code. This report describes installing and using a new PC version of DANST, covers input data requirements and presents examples.

Modeling Europa's dust plumes

NASA Astrophysics Data System (ADS)

Southworth, B. S.; Kempf, S.; Schmidt, J.

2015-12-01

The discovery of Jupiter's moon Europa maintaining a probably sporadic water vapor plume constitutes a huge scientific opportunity for NASA's upcoming mission to this Galilean moon. Measuring properties of material emerging from interior sources offers a unique chance to understand conditions at Europa's subsurface ocean. Exploiting results obtained for the Enceladus plume, we simulate possible Europa plume configurations, analyze particle number density and surface deposition results, and estimate the expected flux of ice grains on a spacecraft. Due to Europa's high escape speed, observing an active plume will require low-altitude flybys, preferably at altitudes of 5-100 km. At higher altitudes a plume may escape detection. Our simulations provide an extensive library documenting the possible structure of Europa dust plumes, which can be quickly refined as more data on Europa dust plumes are collected.

Improved Multi-Axial, Temperature and Time Dependent (MATT) Failure Model

NASA Technical Reports Server (NTRS)

Richardson, D. E.; Anderson, G. L.; Macon, D. J.

2002-01-01

An extensive effort has recently been completed by the Space Shuttle's Reusable Solid Rocket Motor (RSRM) nozzle program to completely characterize the effects of multi-axial loading, temperature and time on the failure characteristics of three filled epoxy adhesives (TIGA 321, EA913NA, EA946). As part of this effort, a single general failure criterion was developed that accounted for these effects simultaneously. This model was named the Multi- Axial, Temperature, and Time Dependent or MATT failure criterion. Due to the intricate nature of the failure criterion, some parameters were required to be calculated using complex equations or numerical methods. This paper documents some simple but accurate modifications to the failure criterion to allow for calculations of failure conditions without complex equations or numerical techniques.

Open Source Patient-Controlled Analgesic Pump Requirements Documentation

PubMed Central

Larson, Brian R.; Hatcliff, John; Chalin, Patrice

2014-01-01

The dynamic nature of the medical domain is driving a need for continuous innovation and improvement in techniques for developing and assuring medical devices. Unfortunately, research in academia and communication between academics, industrial engineers, and regulatory authorities is hampered by the lack of realistic non-proprietary development artifacts for medical devices. In this paper, we give an overview of a detailed requirements document for a Patient-Controlled Analgesic (PCA) pump developed under the US NSF’s Food and Drug Administration (FDA) Scholar-in-Residence (SIR) program. This 60+ page document follows the methodology outlined in the US Federal Aviation Administrations (FAA) Requirements Engineering Management Handbook (REMH) and includes a domain overview, use cases, statements of safety & security requirements, and formal top-level system architectural description. Based on previous experience with release of a requirements document for a cardiac pacemaker that spawned a number of research and pedagogical activities, we believe that the described PCA requirements document can be an important research enabler within the formal methods and software engineering communities. PMID:24931440

Documentation: Records and Reports.

PubMed

Akers, Michael J

2017-01-01

This article deals with documentation to include the beginning of documentation, the requirements of Good Manufacturing Practice reports and records, and the steps that can be taken to minimize Good Manufacturing Practice documentation problems. It is important to remember that documentation for 503a compounding involves the Formulation Record, Compounding Record, Standard Operating Procedures, Safety Data Sheets, etc. For 503b outsourcing facilities, compliance with Current Good Manufacturing Practices is required, so this article is applicable to them. For 503a pharmacies, one can see the development and modification of Good Manufacturing Practice and even observe changes as they are occurring in 503a documentation requirements and anticipate that changes will probably continue to occur. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

2012 Review on the Extension of the AMedP-8(C) Methodology to New Agents, Materials, and Conditions

DTIC Science & Technology

2013-10-01

Atlantic Treaty Organization (NATO) to estimate casualties from chemical, biological , radiological, and nuclear (CBRN) weapons . The final draft...chemical, biological , radiological, and nuclear (CBRN) weapons . The final draft documenting this methodology was published by IDA in 2009 and was...from Battlefield Exposure to Chemical, Biological and Radiological Agents and Nuclear Weapon Effects. IDA Document D- 4465. Alexandria, VA: IDA

The Integrated Distributed Virtual Research Network: An Introduction

DTIC Science & Technology

2014-06-01

Tom Kile , Theron Trout, and Gary Cohn for their extensive contribution to this document to include reviews, comments, and edits, which contributed...to the quality of the document. The ARL Integrated Distributed Virtual Research Testbed (IDVRT) team, consisting of Alex Tarantin, Khoa Bui, Tom Kile ...n. Network Engineer (non-voting member) Tom Kile o. Network Engineer (non-voting member) Theron Trout p. Non-voting members (serving at the

Issues and solutions for storage, retrieval, and searching of MPEG-7 documents

NASA Astrophysics Data System (ADS)

Chang, Yuan-Chi; Lo, Ming-Ling; Smith, John R.

2000-10-01

The ongoing MPEG-7 standardization activity aims at creating a standard for describing multimedia content in order to facilitate the interpretation of the associated information content. Attempting to address a broad range of applications, MPEG-7 has defined a flexible framework consisting of Descriptors, Description Schemes, and Description Definition Language. Descriptors and Description Schemes describe features, structure and semantics of multimedia objects. They are written in the Description Definition Language (DDL). In the most recent revision, DDL applies XML (Extensible Markup Language) Schema with MPEG-7 extensions. DDL has constructs that support inclusion, inheritance, reference, enumeration, choice, sequence, and abstract type of Description Schemes and Descriptors. In order to enable multimedia systems to use MPEG-7, a number of important problems in storing, retrieving and searching MPEG-7 documents need to be solved. This paper reports on initial finding on issues and solutions of storing and accessing MPEG-7 documents. In particular, we discuss the benefits of using a virtual document management framework based on XML Access Server (XAS) in order to bridge the MPEG-7 multimedia applications and database systems. The need arises partly because MPEG-7 descriptions need customized storage schema, indexing and search engines. We also discuss issues arising in managing dependence and cross-description scheme search.

Authorization basis requirements comparison report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brantley, W.M.

The TWRS Authorization Basis (AB) consists of a set of documents identified by TWRS management with the concurrence of DOE-RL. Upon implementation of the TWRS Basis for Interim Operation (BIO) and Technical Safety Requirements (TSRs), the AB list will be revised to include the BIO and TSRs. Some documents that currently form part of the AB will be removed from the list. This SD identifies each - requirement from those documents, and recommends a disposition for each to ensure that necessary requirements are retained when the AB is revised to incorporate the BIO and TSRs. This SD also identifies documentsmore » that will remain part of the AB after the BIO and TSRs are implemented. This document does not change the AB, but provides guidance for the preparation of change documentation.« less

23 CFR 420.111 - What are the documentation requirements for use of FHWA planning and research funds?

Code of Federal Regulations, 2010 CFR

2010-04-01

... and Research Funds § 420.111 What are the documentation requirements for use of FHWA planning and... 23 Highways 1 2010-04-01 2010-04-01 false What are the documentation requirements for use of FHWA planning and research funds? 420.111 Section 420.111 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF...

20 CFR 669.660 - What planning documents and information are required in the application for MSFW youth grants and...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What planning documents and information are... PROGRAM UNDER TITLE I OF THE WORKFORCE INVESTMENT ACT The MSFW Youth Program § 669.660 What planning...? The required planning documents and other required information and the submission dates for filing are...

Human Research Program Requirements Document

NASA Technical Reports Server (NTRS)

Rieger, Gabe

2007-01-01

The purpose of this document is to define, document, and allocate the Human Research Program (HRP) requirements to the HRP Program elements. It establishes the flow-down of requirements from Exploration Systems Mission Directorate (ESMD) and Office of the Chief Health and Medical Officer (OCHMO) to the various Program Elements of the HRP to ensure that human research and technology countermeasure investments are made to insure the delivery of countermeasures and technologies that satisfy ESMD s and OCHMO's exploration mission requirements.

Human Research Program Requirements Document. Human Research Program Revision E

NASA Technical Reports Server (NTRS)

Vargas, Paul

2011-01-01

This document defines, documents, and allocates the Human Research Program (HRP) requirements to the HRP Program Elements. It also establishes the flow of requirements from the Human Exploration and Operations Mission Directorate (HEOMD) and the Office of the Chief Health and Medical Officer (OCHMO) down to the various HRP Program Elements to ensure that human research and technology countermeasure investments support the delivery of countermeasures and technologies that satisfy HEOMD's and OCHMO's exploration mission requirements.

7 CFR 3419.3 - Determination of non-Federal sources of funds.

Code of Federal Regulations, 2010 CFR

2010-01-01

... RESEARCH, EDUCATION, AND EXTENSION SERVICE, DEPARTMENT OF AGRICULTURE MATCHING FUNDS REQUIREMENT FOR AGRICULTURAL RESEARCH AND EXTENSION FORMULA FUNDS AT 1890 LAND-GRANT INSTITUTIONS, INCLUDING TUSKEGEE... agricultural research, extension, and qualified educational activity to meet the matching requirements of...

Functional Requirements for an Electronic Work Package System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oxstrand, Johanna H.

This document provides a set of high level functional requirements for a generic electronic work package (eWP) system. The requirements have been identified by the U.S. nuclear industry as a part of the Nuclear Electronic Work Packages - Enterprise Requirements (NEWPER) initiative. The functional requirements are mainly applied to eWP system supporting Basic and Moderate types of smart documents, i.e., documents that have fields for recording input such as text, dates, numbers, and equipment status, and documents which incorporate additional functionalities such as form field data “type“ validation (e.g. date, text, number, and signature) of data entered and/or self-populate basicmore » document information (usually from existing host application meta data) on the form when the user first opens it. All the requirements are categorized by the roles; Planner, Supervisor, Craft, Work Package Approval Reviewer, Operations, Scheduling/Work Control, and Supporting Functions. The categories Statistics, Records, Information Technology are also included used to group the requirements. All requirements are presented in Section 2 through Section 11. Examples of more detailed requirements are provided for the majority of high level requirements. These examples are meant as an inspiration to be used as each utility goes through the process of identifying their specific requirements. The report’s table of contents provides a summary of the high level requirements.« less

46 CFR 67.509 - Application for approval of exchange of Certificate of Documentation requiring mortgagee consent.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Application for approval of exchange of Certificate of Documentation requiring mortgagee consent. 67.509 Section 67.509 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) DOCUMENTATION AND MEASUREMENT OF VESSELS DOCUMENTATION OF VESSELS Fees § 67.509 Application for approval of exchange of...

NASA Software Documentation Standard

NASA Technical Reports Server (NTRS)

1991-01-01

The NASA Software Documentation Standard (hereinafter referred to as "Standard") is designed to support the documentation of all software developed for NASA; its goal is to provide a framework and model for recording the essential information needed throughout the development life cycle and maintenance of a software system. The NASA Software Documentation Standard can be applied to the documentation of all NASA software. The Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. The basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

Autophagy and leucine promote chronological longevity and respiration proficiency during calorie restriction in yeast.

PubMed

Aris, John P; Alvers, Ashley L; Ferraiuolo, Roy A; Fishwick, Laura K; Hanvivatpong, Amanda; Hu, Doreen; Kirlew, Christine; Leonard, Michael T; Losin, Kyle J; Marraffini, Michelle; Seo, Arnold Y; Swanberg, Veronica; Westcott, Jennifer L; Wood, Michael S; Leeuwenburgh, Christiaan; Dunn, William A

2013-10-01

We have previously shown that autophagy is required for chronological longevity in the budding yeast Saccharomyces cerevisiae. Here we examine the requirements for autophagy during extension of chronological life span (CLS) by calorie restriction (CR). We find that autophagy is upregulated by two CR interventions that extend CLS: water wash CR and low glucose CR. Autophagy is required for full extension of CLS during water wash CR under all growth conditions tested. In contrast, autophagy was not uniformly required for full extension of CLS during low glucose CR, depending on the atg allele and strain genetic background. Leucine status influenced CLS during CR. Eliminating the leucine requirement in yeast strains or adding supplemental leucine to growth media extended CLS during CR. In addition, we observed that both water wash and low glucose CR promote mitochondrial respiration proficiency during aging of autophagy-deficient yeast. In general, the extension of CLS by water wash or low glucose CR was inversely related to respiration deficiency in autophagy-deficient cells. Also, autophagy is required for full extension of CLS under non-CR conditions in buffered media, suggesting that extension of CLS during CR is not solely due to reduced medium acidity. Thus, our findings show that autophagy is: (1) induced by CR, (2) required for full extension of CLS by CR in most cases (depending on atg allele, strain, and leucine availability) and, (3) promotes mitochondrial respiration proficiency during aging under CR conditions. Copyright © 2013 Elsevier Inc. All rights reserved.

Autophagy and leucine promote chronological longevity and respiration proficiency during calorie restriction in yeast

PubMed Central

Aris, John P.; Alvers, Ashley L.; Ferraiuolo, Roy A.; Fishwick, Laura K.; Hanvivatpong, Amanda; Hu, Doreen; Kirlew, Christine; Leonard, Michael T.; Losin, Kyle J.; Marraffini, Michelle; Seo, Arnold Y.; Swanberg, Veronica; Westcott, Jennifer L.; Wood, Michael S.; Leeuwenburgh, Christiaan; Dunn, William A.

2013-01-01

We have previously shown that autophagy is required for chronological longevity in the budding yeast Saccharomyces cerevisiae. Here we examine the requirements for autophagy during extension of chronological life span (CLS) by calorie restriction (CR). We find that autophagy is upregulated by two CR interventions that extend CLS: water wash CR and low glucose CR. Autophagy is required for full extension of CLS during water wash CR under all growth conditions tested. In contrast, autophagy was not uniformly required for full extension of CLS during low glucose CR, depending on the atg allele and strain genetic background. Leucine status influenced CLS during CR. Eliminating the leucine requirement in yeast strains or adding supplemental leucine to growth media extended CLS during CR. In addition, we observed that both water wash and low glucose CR promote mitochondrial respiration proficiency during aging of autophagy-deficient yeast. In general, the extension of CLS by water wash or low glucose CR was inversely related to respiration deficiency in autophagy-deficient cells. Also, autophagy is required for full extension of CLS under non-CR conditions in buffered media, suggesting that extension of CLS during CR is not solely due to reduced medium acidity. Thus, our findings show that autophagy is: (1) induced by CR, (2) required for full extension of CLS by CR in most cases (depending on atg allele, strain, and leucine availability) and, (3) promotes mitochondrial respiration proficiency during aging under CR conditions. PMID:23337777

Transit safety retrofit package development : applications requirements document.

DOT National Transportation Integrated Search

2014-05-01

This Application Requirements Document for the Transit Safety Retrofit Package (TRP) Development captures the system, hardware and software requirements towards fulfilling the technical objectives stated within the contract. To achieve the objective ...

Assessment of documentation requirements under DOE 5481. 1, Safety Analysis and Review System (SARS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Browne, E.T.

1981-03-01

This report assesses the requirements of DOE Order 5481.1, Safety Analysis and Review System for DOE Operations (SARS) in regard to maintaining SARS documentation. Under SARS, all pertinent details of the entire safety analysis and review process for each DOE operation are to be traceable from the initial identification of a hazard. This report is intended to provide assistance in identifying the points in the SARS cycle at which documentation is required, what type of documentation is most appropriate, and where it ultimately should be maintained.

78 FR 55279 - Agency Information Collection Activities: Passenger and Crew Manifest

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-10

... passenger and crew member include: full name; date of birth; gender; citizenship; document type; passport... collected. Type of Review: Extension with no change Affected Public: Businesses, Individuals Commercial...

Recommended HSE-7 documents hierarchy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klein, R.B.; Jennrich, E.A.; Lund, D.M.

1990-12-12

This report recommends a hierarchy of waste management documents at Los Alamos National Laboratory (LANL or Laboratory''). The hierarchy addresses documents that are required to plan, implement, and document waste management programs at Los Alamos. These documents will enable the waste management group and the six sections contained within that group to satisfy requirements that are imposed upon them by the US Department of Energy (DOE), DOE Albuquerque Operations, US Environmental Protection Agency, various State of New Mexico agencies, and Laboratory management.

Recommended HSE-7 documents hierarchy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klein, R.B.; Jennrich, E.A.; Lund, D.M.

1990-12-12

This report recommends a hierarchy of waste management documents at Los Alamos National Laboratory (LANL or ``Laboratory``). The hierarchy addresses documents that are required to plan, implement, and document waste management programs at Los Alamos. These documents will enable the waste management group and the six sections contained within that group to satisfy requirements that are imposed upon them by the US Department of Energy (DOE), DOE Albuquerque Operations, US Environmental Protection Agency, various State of New Mexico agencies, and Laboratory management.

Outcomes of critically ill intensive care unit patients treated with fosfomycin for infections due to pandrug-resistant and extensively drug-resistant carbapenemase-producing Gram-negative bacteria.

PubMed

Pontikis, Konstantinos; Karaiskos, Ilias; Bastani, Styliani; Dimopoulos, George; Kalogirou, Michalis; Katsiari, Maria; Oikonomou, Angelos; Poulakou, Garyphallia; Roilides, Emmanuel; Giamarellou, Helen

2014-01-01

Fosfomycin is active in vitro against extensively drug-resistant (XDR) and pandrug-resistant (PDR) Pseudomonas aeruginosa and Klebsiella pneumoniae carbapenemase-producing strains; however, the in vivo effectiveness against such pathogens is almost unknown. A multicentre, observational, prospective case-series study was performed in 11 ICUs. All consecutive fosfomycin-treated patients suffering from XDR or PDR fosfomycin-susceptible, microbiologically documented infections were recorded. Clinical and microbiological outcomes were assessed. A safety analysis was performed. In total, 68 patients received fosfomycin during the study period, 48 of whom were considered suitable for effectiveness analysis based on predefined criteria. Bacteraemia and ventilator-associated pneumonia were the main infections. Carbapenemase-producing K. pneumoniae and P. aeruginosa were isolated in 41 and 17 cases, respectively. All isolates exhibited an XDR or PDR profile, being fosfomycin-susceptible by definition. Fosfomycin was administered intravenously at a median dose of 24g/day for a median of 14 days, mainly in combination with colistin or tigecycline. Clinical outcome at Day 14 was successful in 54.2% of patients, whilst failure, indeterminate outcome and superinfection were documented in 33.3%, 6.3% and 6.3%, respectively. All-cause mortality at Day 28 was 37.5%. Bacterial eradication was observed in 56.3% of cases. Fosfomycin resistance developed in three cases. The main adverse event was reversible hypokalaemia. In conclusion, fosfomycin could have a place in the armamentarium against XDR and PDR Gram-negative infections in the critically ill. Resistance development during therapy, which has been a matter of concern in previous studies, did not occur frequently. The necessity of combination with other antibiotics requires further investigation. Copyright © 2013 Elsevier B.V. and the International Society of Chemotherapy. All rights reserved.

The Requirements Generation System: A tool for managing mission requirements

NASA Technical Reports Server (NTRS)

Sheppard, Sylvia B.

1994-01-01

Historically, NASA's cost for developing mission requirements has been a significant part of a mission's budget. Large amounts of time have been allocated in mission schedules for the development and review of requirements by the many groups who are associated with a mission. Additionally, tracing requirements from a current document to a parent document has been time-consuming and costly. The Requirements Generation System (RGS) is a computer-supported cooperative-work tool that assists mission developers in the online creation, review, editing, tracing, and approval of mission requirements as well as in the production of requirements documents. This paper describes the RGS and discusses some lessons learned during its development.

76 FR 50881 - Required Scale Tests

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-17

... RIN 0580-AB10 Required Scale Tests AGENCY: Grain Inspection, Packers and Stockyards Administration... required scale tests. Those documents defined ``limited seasonal basis'' incorrectly. This document... 20, 2011 (76 FR 3485) and on April 4, 2011 (76 FR 18348), concerning required scale tests. Those...

Requirements for an Advanced Ocean Radiometer

NASA Technical Reports Server (NTRS)

Meister, Gerhard; McClain, Charles R.; Ahmad, Ziauddin; Bailey, Sean W.; Barnes, Robert A.; Brown, Steven; Eplee, Robert E.; Franz, Bryan; Holmes, Alan; Monosmith, W. Bryan;

A case study of the introduction of the International Classification for Nursing Practice(®) in Poland.

PubMed

Kilańska, D; Gaworska-Krzemińska, A; Grabowska, H; Gorzkowicz, B

2016-09-01

The development of a nursing practice, improvements in nurses' autonomy, and increased professional and personal responsibility for the medical services provided all require professional documentation with records of health status assessments, decisions undertaken, actions and their outcomes for each patient. The International Classification for Nursing Practice is a tool that meets all of these needs, and although it requires continuous evaluation, it offers professional documentation and communication in the practitioner and researcher community. The aim of this paper is to present a theoretical critique of an issue related to policy and experience of the current situation in Polish nursing - especially of the efforts to standardize nursing practices through the introduction and development of the Classification in Poland. Despite extensive promotion and training by International Council of Nurses members worldwide, there are still many countries where the Classification has not been implemented as a standard tool in healthcare facilities. Recently, a number of initiatives were undertaken in cooperation with the local and state authorities to disseminate the Classification in healthcare facilities. Thanks to intense efforts by the Polish Nurses Association and the International Council of Nurses Accredited Center for ICNP(®) Research & Development at the Medical University of Łódź, the Classification is known in Poland and has been tested at several centres. Nevertheless, an actual implementation that would allow for national and international interoperability requires strategic governmental decisions and close cooperation with information technology companies operating in the country. Discussing the barriers to the implementation of the Classification can improve understanding of it and its use. At a policy level, decision makers need to understand that use Classification in eHealth services and tools it is necessary to achieve interoperability. © 2016 International Council of Nurses.

DNA Commission of the International Society for Forensic Genetics: Recommendations on the validation of software programs performing biostatistical calculations for forensic genetics applications.

PubMed

Coble, M D; Buckleton, J; Butler, J M; Egeland, T; Fimmers, R; Gill, P; Gusmão, L; Guttman, B; Krawczak, M; Morling, N; Parson, W; Pinto, N; Schneider, P M; Sherry, S T; Willuweit, S; Prinz, M

2016-11-01

The use of biostatistical software programs to assist in data interpretation and calculate likelihood ratios is essential to forensic geneticists and part of the daily case work flow for both kinship and DNA identification laboratories. Previous recommendations issued by the DNA Commission of the International Society for Forensic Genetics (ISFG) covered the application of bio-statistical evaluations for STR typing results in identification and kinship cases, and this is now being expanded to provide best practices regarding validation and verification of the software required for these calculations. With larger multiplexes, more complex mixtures, and increasing requests for extended family testing, laboratories are relying more than ever on specific software solutions and sufficient validation, training and extensive documentation are of upmost importance. Here, we present recommendations for the minimum requirements to validate bio-statistical software to be used in forensic genetics. We distinguish between developmental validation and the responsibilities of the software developer or provider, and the internal validation studies to be performed by the end user. Recommendations for the software provider address, for example, the documentation of the underlying models used by the software, validation data expectations, version control, implementation and training support, as well as continuity and user notifications. For the internal validations the recommendations include: creating a validation plan, requirements for the range of samples to be tested, Standard Operating Procedure development, and internal laboratory training and education. To ensure that all laboratories have access to a wide range of samples for validation and training purposes the ISFG DNA commission encourages collaborative studies and public repositories of STR typing results. Published by Elsevier Ireland Ltd.

A First Standardized Swiss Electronic Maternity Record.

PubMed

Murbach, Michel; Martin, Sabine; Denecke, Kerstin; Nüssli, Stephan

2017-01-01

During the nine months of pregnancy, women have to regularly visit several physicians for continuous monitoring of the health and development of the fetus and mother. Comprehensive examination results of different types are generated in this process; documentation and data transmission standards are still unavailable or not in use. Relevant information is collected in a paper-based maternity record carried by the pregnant women. To improve availability and transmission of data, we aim at developing a first prototype for an electronic maternity record for Switzerland. By analyzing the documentation workflow during pregnancy, we determined a maternity record data set. Further, we collected requirements towards a digital maternity record. As data exchange format, the Swiss specific exchange format SMEEX (swiss medical data exchange) was exploited. Feedback from 27 potential users was collected to identify further improvements. The relevant data is extracted from the primary care information system as SMEEX file, stored in a database and made available in a web and a mobile application, developed as prototypes of an electronic maternity record. The user confirmed the usefulness of the system and provided multiple suggestions for an extension. An electronical maternity record as developed in this work could be in future linked to the electronic patient record.

The REporting of studies Conducted using Observational Routinely-collected health Data (RECORD) Statement

PubMed Central

Benchimol, Eric I.; Smeeth, Liam; Guttmann, Astrid; Harron, Katie; Moher, David; Petersen, Irene; Sørensen, Henrik T.; von Elm, Erik; Langan, Sinéad M.

2015-01-01

Routinely collected health data, obtained for administrative and clinical purposes without specific a priori research goals, are increasingly used for research. The rapid evolution and availability of these data have revealed issues not addressed by existing reporting guidelines, such as Strengthening the Reporting of Observational Studies in Epidemiology (STROBE). The REporting of studies Conducted using Observational Routinely collected health Data (RECORD) statement was created to fill these gaps. RECORD was created as an extension to the STROBE statement to address reporting items specific to observational studies using routinely collected health data. RECORD consists of a checklist of 13 items related to the title, abstract, introduction, methods, results, and discussion section of articles, and other information required for inclusion in such research reports. This document contains the checklist and explanatory and elaboration information to enhance the use of the checklist. Examples of good reporting for each RECORD checklist item are also included herein. This document, as well as the accompanying website and message board (http://www.record-statement.org), will enhance the implementation and understanding of RECORD. Through implementation of RECORD, authors, journals editors, and peer reviewers can encourage transparency of research reporting. PMID:26440803

The REporting of studies Conducted using Observational Routinely-collected health Data (RECORD) statement.

PubMed

Benchimol, Eric I; Smeeth, Liam; Guttmann, Astrid; Harron, Katie; Moher, David; Petersen, Irene; Sørensen, Henrik T; von Elm, Erik; Langan, Sinéad M

2015-10-01

Routinely collected health data, obtained for administrative and clinical purposes without specific a priori research goals, are increasingly used for research. The rapid evolution and availability of these data have revealed issues not addressed by existing reporting guidelines, such as Strengthening the Reporting of Observational Studies in Epidemiology (STROBE). The REporting of studies Conducted using Observational Routinely collected health Data (RECORD) statement was created to fill these gaps. RECORD was created as an extension to the STROBE statement to address reporting items specific to observational studies using routinely collected health data. RECORD consists of a checklist of 13 items related to the title, abstract, introduction, methods, results, and discussion section of articles, and other information required for inclusion in such research reports. This document contains the checklist and explanatory and elaboration information to enhance the use of the checklist. Examples of good reporting for each RECORD checklist item are also included herein. This document, as well as the accompanying website and message board (http://www.record-statement.org), will enhance the implementation and understanding of RECORD. Through implementation of RECORD, authors, journals editors, and peer reviewers can encourage transparency of research reporting.

[The REporting of studies Conducted using Observational Routinely-collected health Data (RECORD) statement].

PubMed

Benchimol, Eric I; Smeeth, Liam; Guttmann, Astrid; Harron, Katie; Hemkens, Lars G; Moher, David; Petersen, Irene; Sørensen, Henrik T; von Elm, Erik; Langan, Sinéad M

2016-10-01

Routinely collected health data, obtained for administrative and clinical purposes without specific a priori research goals, are increasingly used for research. The rapid evolution and availability of these data have revealed issues not addressed by existing reporting guidelines, such as Strengthening the Reporting of Observational Studies in Epidemiology (STROBE). The REporting of studies Conducted using Observational Routinely collected health Data (RECORD) statement was created to fill these gaps. RECORD was created as an extension to the STROBE statement to address reporting items specific to observational studies using routinely collected health data. RECORD consists of a checklist of 13 items related to the title, abstract, introduction, methods, results, and discussion section of articles, and other information required for inclusion in such research reports. This document contains the checklist as well as explanatory and elaboration information to enhance the use of the checklist. Examples of good reporting for each RECORD checklist item are also included. This document, as well as the accompanying website and message board (http://www.record-statement.org), will improve the implementation and understanding of RECORD. By implementing RECORD, authors, journals editors, and peer reviewers can enhance transparency of research reporting. Copyright © 2016. Published by Elsevier GmbH.

D Mapping of Cultural Heritage: Special Problems and best Practices in Extreme Case-Studies

NASA Astrophysics Data System (ADS)

Patias, P.; Kaimaris, D.; Georgiadis, Ch.; Stamnas, A.; Antoniadis, D.; Papadimitrakis, D.

2013-07-01

Photogrammetrey has a long successful history in the area of 3D modelling and documentation of cultural heritage monuments. In some cases an extensive study, preparation and the application of novel solutions is required for the successful documentation and 3D modelling of monuments. In most of the cases the problem that we have to face is difficulties regarding accessing, photographing, and measuring the monument from the optimal distance, in combination with the need for a high spatial resolution mapping. This paper is highlighting the special problems and the novel solutions, performed during mapping of two significant cultural heritage monuments in Greece. The Roussanou monastery (1527-1529 A.C., Meteora, Center Greece) and its underlying rock, had to be photographed and measured from a far distance and measured with various spatial resolutions. In the lakeside Neolithic settlement of Dispilio (6.000 B.C., western Greece) the enclosure which is covered with vegetation above a height of 3 m, had to be measured with high spatial resolution. The combined use of a laser scanner, a digital camera equipped with a telephoto lens and UAV allowed the successful mapping and the production of orthophotomaps in each case.

Navigating a Transdisciplinary Research Project with a Non-Traditional Academic Background: Climate Change, Soil Health and Sustainability

NASA Astrophysics Data System (ADS)

Basche, A.

2014-12-01

The Climate and Corn-based Cropping Systems Coordinated Agriculture Project (CSCAP) is a collaboration of 150+ team members spanning a range of scientific disciplinary backgrounds. The project goal is to produce collaborative research, education and extension aimed at mitigating and adapting Midwest cropping systems to climate variability and change. My PhD work in Agronomy and Sustainable Agriculture is a part of the CSCAP although my prior academic background was in applied climate science and biology, thus proposing a potential challenge to the new academic landscape. Further, graduate students within CSCAP are a part of a natural experiment in how the next generation of scientists operates in a transdisciplinary environment. As part of my leadership in the CSCAP, I helped to develop a "roadmap" document outlining the learning opportunities available to students. This document was meant to underscore the skills and experiences that will aid us in future collaborative research projects. Through these leadership experiences, I believe that the underpinning of any successful collaborative research project requires time: to develop relationships, earn trust and develop shared understandings and respect for different academic backgrounds.

The Genetic Privacy Act and commentary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Annas, G.J.; Glantz, L.H.; Roche, P.A.

1995-02-28

The Genetic Privacy Act is a proposal for federal legislation. The Act is based on the premise that genetic information is different from other types of personal information in ways that require special protection. The DNA molecule holds an extensive amount of currently indecipherable information. The major goal of the Human Genome Project is to decipher this code so that the information it contains is accessible. The privacy question is, accessible to whom? The highly personal nature of the information contained in DNA can be illustrated by thinking of DNA as containing an individual`s {open_quotes}future diary.{close_quotes} A diary is perhapsmore » the most personal and private document a person can create. It contains a person`s innermost thoughts and perceptions, and is usually hidden and locked to assure its secrecy. Diaries describe the past. The information in one`s genetic code can be thought of as a coded probabilistic future diary because it describes an important part of a unique and personal future. This document presents an introduction to the proposal for federal legislation `the Genetic Privacy Act`; a copy of the proposed act; and comment.« less

Elevated Arsenic and Uranium Concentrations in Unregulated Water Sources on the Navajo Nation, USA.

PubMed

Hoover, Joseph; Gonzales, Melissa; Shuey, Chris; Barney, Yolanda; Lewis, Johnnye

2017-01-01

Regional water pollution and use of unregulated water sources can be an important mixed metals exposure pathway for rural populations located in areas with limited water infrastructure and an extensive mining history. Using censored data analysis and mapping techniques we analyzed the joint geospatial distribution of arsenic and uranium in unregulated water sources throughout the Navajo Nation, where over 500 abandoned uranium mine sites are located in the rural southwestern United States. Results indicated that arsenic and uranium concentrations exceeded national drinking water standards in 15.1 % (arsenic) and 12.8 % (uranium) of tested water sources. Unregulated sources in close proximity (i.e., within 6 km) to abandoned uranium mines yielded significantly higher concentrations of arsenic or uranium than more distant sources. The demonstrated regional trends for potential co-exposure to these chemicals have implications for public policy and future research. Specifically, to generate solutions that reduce human exposure to water pollution from unregulated sources in rural areas, the potential for co-exposure to arsenic and uranium requires expanded documentation and examination. Recommendations for prioritizing policy and research decisions related to the documentation of existing health exposures and risk reduction strategies are also provided.

Cislan-2 extension final document by University of Twente (Netherlands)

NASA Astrophysics Data System (ADS)

Niemegeers, Ignas; Baumann, Frank; Beuwer, Wim; Jordense, Marcel; Pras, Aiko; Schutte, Leon; Tracey, Ian

1992-01-01

Results of worked performed under the so called Cislan extension contract are presented. The adaptation of the Cislan 2 prototype design to an environment of interconnected Local Area Networks (LAN's) instead of a single 802.5 token ring LAN is considered. In order to extend the network architecture, the Interconnection Function (IF) protocol layer was subdivided into two protocol layers: a new IF layer, and below the Medium Enhancement (ME) protocol layer. Some small enhancements to the distributed bandwidth allocation protocol were developed, which in fact are also applicable to the 'normal' Cislan 2 system. The new services and protocols are described together with some scenarios and requirements for the new internetting Cislan 2 system. How to overcome the degradation of the quality of speech due to packet loss on the LAN subsystem was studied. Experiments were planned in order to measure this speech quality degradation. Simulations were performed of two Cislan subsystems, the bandwidth allocation protocol and the clock synchronization mechanism. Results on both simulations, performed on SUN workstations using QNAP as a simulation tool, are given. Results of the simulations of the clock synchronization mechanism, and results of the simulation of the distributed bandwidth allocation protocol are given.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Thomas M.; Berndt, Markus; Baglietto, Emilio

The purpose of this report is to document a multi-year plan for enhancing turbulence modeling in Hydra-TH for the Consortium for Advanced Simulation of Light Water Reactors (CASL) program. Hydra-TH is being developed to the meet the high- fidelity, high-Reynolds number CFD based thermal hydraulic simulation needs of the program. This work is being conducted within the thermal hydraulics methods (THM) focus area. This report is an extension of THM CASL milestone L3:THM.CFD.P10.02 [33] (March, 2015) and picks up where it left off. It will also serve to meet the requirements of CASL THM level three milestone, L3:THM.CFD.P11.04, scheduled formore » completion September 30, 2015. The objectives of this plan will be met by: maturation of recently added turbulence models, strategic design/development of new models and systematic and rigorous testing of existing and new models and model extensions. While multi-phase turbulent flow simulations are important to the program, only single-phase modeling will be considered in this report. Large Eddy Simulation (LES) is also an important modeling methodology. However, at least in the first year, the focus is on steady-state Reynolds Averaged Navier-Stokes (RANS) turbulence modeling.« less

Extracting and connecting chemical structures from text sources using chemicalize.org.

PubMed

Southan, Christopher; Stracz, Andras

2013-04-23

Exploring bioactive chemistry requires navigating between structures and data from a variety of text-based sources. While PubChem currently includes approximately 16 million document-extracted structures (15 million from patents) the extent of public inter-document and document-to-database links is still well below any estimated total, especially for journal articles. A major expansion in access to text-entombed chemistry is enabled by chemicalize.org. This on-line resource can process IUPAC names, SMILES, InChI strings, CAS numbers and drug names from pasted text, PDFs or URLs to generate structures, calculate properties and launch searches. Here, we explore its utility for answering questions related to chemical structures in documents and where these overlap with database records. These aspects are illustrated using a common theme of Dipeptidyl Peptidase 4 (DPPIV) inhibitors. Full-text open URL sources facilitated the download of over 1400 structures from a DPPIV patent and the alignment of specific examples with IC50 data. Uploading the SMILES to PubChem revealed extensive linking to patents and papers, including prior submissions from chemicalize.org as submitting source. A DPPIV medicinal chemistry paper was completely extracted and structures were aligned to the activity results table, as well as linked to other documents via PubChem. In both cases, key structures with data were partitioned from common chemistry by dividing them into individual new PDFs for conversion. Over 500 structures were also extracted from a batch of PubMed abstracts related to DPPIV inhibition. The drug structures could be stepped through each text occurrence and included some converted MeSH-only IUPAC names not linked in PubChem. Performing set intersections proved effective for detecting compounds-in-common between documents and merged extractions. This work demonstrates the utility of chemicalize.org for the exploration of chemical structure connectivity between documents and databases, including structure searches in PubChem, InChIKey searches in Google and the chemicalize.org archive. It has the flexibility to extract text from any internal, external or Web source. It synergizes with other open tools and the application is undergoing continued development. It should thus facilitate progress in medicinal chemistry, chemical biology and other bioactive chemistry domains.

Architecture of a consent management suite and integration into IHE-based Regional Health Information Networks.

PubMed

Heinze, Oliver; Birkle, Markus; Köster, Lennart; Bergh, Björn

2011-10-04

The University Hospital Heidelberg is implementing a Regional Health Information Network (RHIN) in the Rhine-Neckar-Region in order to establish a shared-care environment, which is based on established Health IT standards and in particular Integrating the Healthcare Enterprise (IHE). Similar to all other Electronic Health Record (EHR) and Personal Health Record (PHR) approaches the chosen Personal Electronic Health Record (PEHR) architecture relies on the patient's consent in order to share documents and medical data with other care delivery organizations, with the additional requirement that the German legislation explicitly demands a patients' opt-in and does not allow opt-out solutions. This creates two issues: firstly the current IHE consent profile does not address this approach properly and secondly none of the employed intra- and inter-institutional information systems, like almost all systems on the market, offers consent management solutions at all. Hence, the objective of our work is to develop and introduce an extensible architecture for creating, managing and querying patient consents in an IHE-based environment. Based on the features offered by the IHE profile Basic Patient Privacy Consent (BPPC) and literature, the functionalities and components to meet the requirements of a centralized opt-in consent management solution compliant with German legislation have been analyzed. Two services have been developed and integrated into the Heidelberg PEHR. The standard-based Consent Management Suite consists of two services. The Consent Management Service is able to receive and store consent documents. It can receive queries concerning a dedicated patient consent, process it and return an answer. It represents a centralized policy enforcement point. The Consent Creator Service allows patients to create their consents electronically. Interfaces to a Master Patient Index (MPI) and a provider index allow to dynamically generate XACML-based policies which are stored in a CDA document to be transferred to the first service. Three workflows have to be considered to integrate the suite into the PEHR: recording the consent, publishing documents and viewing documents. Our approach solves the consent issue when using IHE profiles for regional health information networks. It is highly interoperable due to the use of international standards and can hence be used in any other region to leverage consent issues and substantially promote the use of IHE for regional health information networks in general.

Architecture of a consent management suite and integration into IHE-based regional health information networks

PubMed Central

2011-01-01

Background The University Hospital Heidelberg is implementing a Regional Health Information Network (RHIN) in the Rhine-Neckar-Region in order to establish a shared-care environment, which is based on established Health IT standards and in particular Integrating the Healthcare Enterprise (IHE). Similar to all other Electronic Health Record (EHR) and Personal Health Record (PHR) approaches the chosen Personal Electronic Health Record (PEHR) architecture relies on the patient's consent in order to share documents and medical data with other care delivery organizations, with the additional requirement that the German legislation explicitly demands a patients' opt-in and does not allow opt-out solutions. This creates two issues: firstly the current IHE consent profile does not address this approach properly and secondly none of the employed intra- and inter-institutional information systems, like almost all systems on the market, offers consent management solutions at all. Hence, the objective of our work is to develop and introduce an extensible architecture for creating, managing and querying patient consents in an IHE-based environment. Methods Based on the features offered by the IHE profile Basic Patient Privacy Consent (BPPC) and literature, the functionalities and components to meet the requirements of a centralized opt-in consent management solution compliant with German legislation have been analyzed. Two services have been developed and integrated into the Heidelberg PEHR. Results The standard-based Consent Management Suite consists of two services. The Consent Management Service is able to receive and store consent documents. It can receive queries concerning a dedicated patient consent, process it and return an answer. It represents a centralized policy enforcement point. The Consent Creator Service allows patients to create their consents electronically. Interfaces to a Master Patient Index (MPI) and a provider index allow to dynamically generate XACML-based policies which are stored in a CDA document to be transferred to the first service. Three workflows have to be considered to integrate the suite into the PEHR: recording the consent, publishing documents and viewing documents. Conclusions Our approach solves the consent issue when using IHE profiles for regional health information networks. It is highly interoperable due to the use of international standards and can hence be used in any other region to leverage consent issues and substantially promote the use of IHE for regional health information networks in general. PMID:21970788

10 CFR 34.89 - Location of documents and records.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Location of documents and records. 34.89 Section 34.89 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.89 Location of documents...

10 CFR 34.89 - Location of documents and records.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Location of documents and records. 34.89 Section 34.89 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.89 Location of documents...

10 CFR 34.89 - Location of documents and records.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Location of documents and records. 34.89 Section 34.89 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.89 Location of documents...

IDC System Specification Document.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clifford, David J.

2014-12-01

This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris

45 CFR 164.316 - Policies and procedures and documentation requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Electronic Protected Health Information § 164.316 Policies and procedures and documentation requirements. A... reasonable and appropriate policies and procedures to comply with the standards, implementation... 45 Public Welfare 1 2010-10-01 2010-10-01 false Policies and procedures and documentation...

45 CFR 164.316 - Policies and procedures and documentation requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Electronic Protected Health Information § 164.316 Policies and procedures and documentation requirements. A... reasonable and appropriate policies and procedures to comply with the standards, implementation... 45 Public Welfare 1 2011-10-01 2011-10-01 false Policies and procedures and documentation...

Asymmetrical booster ascent guidance and control system design study. Volume 2: SSFS math models - Ascent. [space shuttle development

NASA Technical Reports Server (NTRS)

Williams, F. E.; Lemon, R. S.

1974-01-01

The engineering equations and mathematical models developed for use in the space shuttle functional simulator (SSFS) are presented, and include extensive revisions and additions to earlier documentation. Definitions of coordinate systems used by the SSFS models and coordinate tranformations are given, along with documentation of the flexible body mathematical models. The models were incorporated in the SSFS and are in the checkout stage.

Integrated Reconfigurable Intelligent Systems (IRIS) for Complex Naval Systems

DTIC Science & Technology

2009-12-31

written. The new implementation supports the XML dialect called dashML. The plug-in is written in Java script using a flexible extension of the...human in the loop control was improved and documented, and the script for integration was developed; further study on theoretical framework for...reference damage controller was developed and tested; the model of human in the loop control was improved and documented, and the script for integrating

XML Schema Guide for Primary CDR Submissions

EPA Pesticide Factsheets

This document presents the extensible markup language (XML) schema guide for the Office of Pollution Prevention and Toxics’ (OPPT) e-CDRweb tool. E-CDRweb is the electronic, web-based tool provided by Environmental Protection Agency (EPA) for the submission of Chemical Data Reporting (CDR) information. This document provides the user with tips and guidance on correctly using the version 1.7 XML schema. Please note that the order of the elements must match the schema.

[The importance of genealogy applied to genetic research in Costa Rica].

PubMed

Meléndez Obando, Mauricio O

2004-09-01

The extensive development of genealogical studies based on archival documents has provided powerful support for genetic research in Costa Rica over the past quarter century. As a result, several questions of population history have been answered, such as those involving hereditary illnesses, suggesting additional avenues and questions as well. Similarly, the preservation of massive amounts of historical documentation highlights the major advantages that the Costa Rican population offers to genetic research.

Voluntary Guidelines for Methamphetamine Laboratory Cleanup - Document

EPA Pesticide Factsheets

provides technical guidance for state and local personnel responsible for meth lab cleanup, based on an extensive review of the best available science and practices, and addresses general cleanup activities, specific items/materials, sampling.

Details on Exclusive Use Data Protection for Minor Use Registrations

EPA Pesticide Factsheets

This document provides information about issues related to exclusive use data protection for minor use registrations, including extension of the exclusive use period and establishing a new exclusive use period.

Transportation Statistical Data and Information

DOT National Transportation Integrated Search

1976-12-01

The document contains an extensive review of internal and external sources of transportation data and statistics especially created for data administrators. Organized around the transportation industry and around the elements of the U.S. Department o...

30 CFR 22.11 - Instructions on handling future changes in design.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Certification Center, 765 Technology Drive, Triadelphia, WV 26059, requesting an extension of the original... that are critical to the safety of the product; and (iv) All documentation, including drawings and...

30 CFR 23.14 - Instructions for handling future changes in design.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., 765 Technology Drive, Triadelphia, WV 26059, requesting an extension of the original approval and... that are critical to the safety of the product; and (iv) All documentation, including drawings and...

30 CFR 23.14 - Instructions for handling future changes in design.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., 765 Technology Drive, Triadelphia, WV 26059, requesting an extension of the original approval and... that are critical to the safety of the product; and (iv) All documentation, including drawings and...