15 CFR Appendix II to Part 921 - Typology of National Estuarine Research Reserves

Code of Federal Regulations, 2013 CFR

2013-01-01

... form. This also includes the rocky coast tidepools that fall within the intertidal zone. Dominant fauna... found above sea level in volcanic crater remnants forms as a result of poor drainage characteristics of..., American Samoa. 8. Anchialine systems: These small coastal exposures of brackish water form in lava...

15 CFR Appendix II to Part 921 - Typology of National Estuarine Research Reserves

Code of Federal Regulations, 2011 CFR

2011-01-01

... form. This also includes the rocky coast tidepools that fall within the intertidal zone. Dominant fauna... found above sea level in volcanic crater remnants forms as a result of poor drainage characteristics of..., American Samoa. 8. Anchialine systems: These small coastal exposures of brackish water form in lava...

The Impact of "ED" on Educational Research.

ERIC Educational Resources Information Center

Florio, David H.

1980-01-01

The purposes, structure, and component parts of the newly formed Department of Education (ED) organizations from which educational research programs will be administered are discussed. As the climate surrounding ED changes, opportunities to take advantage of the elevated status of research will be presented. (Author/RL)

75 FR 10414 - Researcher Identification Card

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-08

... capturing administrative information on the characteristics of our users. Other forms of identification are... use bar-codes on researcher identification cards in the Washington, DC, area. The plastic cards we... plastic researcher identification cards as part of their security systems, we issue a plastic card to...

Effects of intergenerational Montessori-based activities programming on engagement of nursing home residents with dementia

PubMed Central

Lee, Michelle M; Camp, Cameron J; Malone, Megan L

2007-01-01

Fourteen nursing home residents on a dementia special care unit at a skilled nursing facility took part in one-to-one intergenerational programming (IGP) with 15 preschool children from the facility’s on-site child care center. Montessori-based activities served as the interface for interactions between dyads. The amount of time residents demonstrated positive and negative forms of engagement during IGP and standard activities programming was assessed through direct observation using a tool developed for this purpose – the Myers Research Institute Engagement Scale (MRI-ES). These residents with dementia displayed the ability to successfully take part in IGP. Most successfully presented “lessons” to the children in their dyads, similar to the way that Montessori teachers present lessons to children, while persons with more severe cognitive impairment took part in IGP through other methods such as parallel play. Taking part in IGP was consistently related with higher levels of positive engagement and lower levels of negative forms of engagement in these residents with dementia than levels seen in standard activities programming on the unit. Implications of using this form of IGP, and directions for future research, are discussed. PMID:18044197

Effects of intergenerational Montessori-based activities programming on engagement of nursing home residents with dementia.

PubMed

Lee, Michelle M; Camp, Cameron J; Malone, Megan L

2007-01-01

Fourteen nursing home residents on a dementia special care unit at a skilled nursing facility took part in one-to-one intergenerational programming (IGP) with 15 preschool children from the facility's on-site child care center. Montessori-based activities served as the interface for interactions between dyads. The amount of time residents demonstrated positive and negative forms of engagement during IGP and standard activities programming was assessed through direct observation using a tool developed for this purpose--the Myers Research Institute Engagement Scale (MRI-ES). These residents with dementia displayed the ability to successfully take part in IGP. Most successfully presented "lessons" to the children in their dyads, similar to the way that Montessori teachers present lessons to children, while persons with more severe cognitive impairment took part in IGP through other methods such as parallel play. Taking part in IGP was consistently related with higher levels of positive engagement and lower levels of negative forms of engagement in these residents with dementia than levels seen in standard activities programming on the unit. Implications of using this form of IGP, and directions for future research, are discussed.

The Tradition of Mentoring Part I: Mentoring the Researcher

ERIC Educational Resources Information Center

Cheatham, Wayman Wendell

2010-01-01

This text is a summary of reflection points and notes from Part I of a two-part lecture on the Tradition of Mentoring. In this lecture, basic historical concepts on the origins of mentoring were reviewed. Of particular importance were several reflections concerning how effective mentoring differs from other forms of leadership and training in the…

Forest products research in IUFRO history and potential

Treesearch

Robert L. Youngs; John A. Youngquist

1999-01-01

When silviculture researchers in central Europe were gathering together to form IUFRO in 1892, forest products researchers were occupied with making useful forest products and conserving the forest resource through wise use. Forest products researchers did not become an active part of IUFRO until 50 years later. Research in forest products was stimulated by World War I...

78 FR 68902 - Reports, Forms, and Recordkeeping Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-15

... Research (NTI-132), National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE., W46-472... on the Nation's highways. As part of this statutory mandate, NHTSA is authorized to conduct research... research indicates that gains in physical fitness improve a number of functional abilities important for...

Influence of the forming process on the mechanical behavior of a commingled carbon PPS composite part

NASA Astrophysics Data System (ADS)

Patou, J.; De Luycker, E.; Bonnaire, R.; Cutard, T.; Bernhart, G.

2018-05-01

In this research work, the influence of the forming process on commingled thermoplastic composite parts mechanical behavior was investigated. The aim of this work is to evaluate the influence of fabric shearing on the mechanical response of composite laminate. Different sheets with a given shear angle are manufactured. Tensile experimental results are compared with the properties obtained from a simple model based on the laminate plate theory for various off angles. Later, the link with a tetrahedron shape 3D part manufactured by punch deep drawing will be made.

Advanced Interconnect Roadmap for Space Applications

NASA Technical Reports Server (NTRS)

Galbraith, Lissa

1999-01-01

This paper presents the NASA electronic parts and packaging program for space applications. The topics include: 1) Forecasts; 2) Technology Challenges; 3) Research Directions; 4) Research Directions for Chip on Board (COB); 5) Research Directions for HDPs: Multichip Modules (MCMs); 6) Research Directions for Microelectromechanical systems (MEMS); 7) Research Directions for Photonics; and 8) Research Directions for Materials. This paper is presented in viewgraph form.

Live from Antarctica: Then and now

NASA Astrophysics Data System (ADS)

This real-time educational video series, featuring Camille Jennings from Maryland Public Television, includes information from Antarctic scientists and interactive discussion between the scientists and school children from both Maryland and Hawaii. This is part of a 'Passport to Knowledge Special' series. In this part of the four part Antarctic series, the history of Antarctica from its founding to the present, its mammals, plants, and other life forms are shown and discussed. The importance of Antarctica as a research facility is explained, along with different experiments and research that the facilities there perform.

Live from Antarctica: Then and Now

NASA Technical Reports Server (NTRS)

1994-01-01

This real-time educational video series, featuring Camille Jennings from Maryland Public Television, includes information from Antarctic scientists and interactive discussion between the scientists and school children from both Maryland and Hawaii. This is part of a 'Passport to Knowledge Special' series. In this part of the four part Antarctic series, the history of Antarctica from its founding to the present, its mammals, plants, and other life forms are shown and discussed. The importance of Antarctica as a research facility is explained, along with different experiments and research that the facilities there perform.

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 1, part 2:] Technical communications in aeronautics: Results of an exploratory study

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Glassman, Myron; Oliu, Walter E.; Barclay, Rebecca O.

1989-01-01

A study was undertaken that explored several aspects of technical communications in aeronautics. The study, which utilized survey research in the form of a self-administered questionnaire, was sent to 2,000 randomly selected members of the American Institute of Aeronautics and Astronautics. Six hundred and six usable questionnaires (30.3 percent) were received by the established cut off date. Part 2 of this study lists appendices to part 1, including survey instrument, aggregate totals, cross tabulations, and open-ended comments.

Collaborative Action Research through Technologically Mediated Agoras

ERIC Educational Resources Information Center

Fernández-Díaz, Elia; Fernández-Olaskoaga, Lorea; Gutiérrez-Esteban, Prudencia

2017-01-01

The study presented in this article forms part of a wider project promoting collaboration between junior researchers from different universities with the objective of rethinking and improving teaching practice in relation to the use of technology. The article describes research carried out during the 2012/13 academic year aimed at developing…

77 FR 29348 - Agency Information Collection Request; 30-Day Public Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-17

...: Public Health Service Polices on Research Misconduct (42 CFR part 93)--OMB No 0937-0198-Extension--Office... collection. The purpose of the Annual Report on Possible Research Misconduct (Annual Report) form is to provide data on the amount of research misconduct activity occurring in institutions conducting PHS...

Part-Time Students and Part-Time Study in Higher Education in the UK: Strand 2--A Survey of the Issues Facing Institutions

ERIC Educational Resources Information Center

Boorman, Susan; Brown, Nigel; Payne, Philip; Ramsden, Brian

2006-01-01

This is the report on part-time study in UK higher education institutions (HEIs) for Universities UK and GuildHE (previously SCOP) from Nigel Brown Associates. It forms Strand 2 of the wider research into part-time higher education commissioned by Universities UK and GuildHE using quantitative data not available from published sources and…

BUYING AND SELLING A SMALL BUSINESS.

DTIC Science & Technology

Part One takes the form of a manual of the processes and techniques of buying and selling a small business . This material is presented in a...finalizing the transaction and planning for operation under new ownership and management . Part Two reports the nature of the research conducted during the

The Owner's Manual for the Brain: Everyday Applications from Mind-Brain Research. Second Edition.

ERIC Educational Resources Information Center

Howard, Pierce J.

This book discusses what is known about the brain and memory storage and how people can improve their recall of information. There are 10 parts with 37 chapters. Part 1, "Forming a Foundation: The Context for Using Your Owner's Manual," includes topics like brain basics and brain imaging. Part 2, "Wellness: Getting the Most Out of…

Real-Time Research: An Experiment in the Design of Scholarship

ERIC Educational Resources Information Center

Zimmerman, Eric; Squire, Kurt; Steinkuehler, Constance; Dikkers, Seann

2009-01-01

This article reports on an unconventional collaborative event called Real-Time Research, a project that brought 25 participants together from radically divergent fields for a playful and somewhat improvisational investigation of what it means to do games and learning research. Real-Time Research took the form of a two-part workshop session at the…

Extraction of Carbon Dioxide and Hydrogen from Seawater By an Electrolytic Cation Exchange Module (E-CEM) Part 5: E-CEM Effluent Discharge Composition as a Function of Electrode Water Composition

DTIC Science & Technology

2017-08-01

Naval Research Laboratory Washington, DC 20375-5320 NRL/MR/6360--17-9743 Extraction of Carbon Dioxide and Hydrogen from Seawater by an Electrolytic...Cation Exchange Module (E-CEM) Part V: E-CEM Effluent Discharge Composition as a Function of Electrode Water Composition August 1, 2017 Approved for...Office of Naval Research Arlington, Virginia Dennis r. HarDy Nova Research Inc. Alexandria, Virginia i REPORT DOCUMENTATION PAGE Form

Working Less and Enjoying It More: Alternative Work Schedules.

ERIC Educational Resources Information Center

Shanks, Katherine

1984-01-01

Explores three forms of alternative work schedules that research has shown improve job performance and decrease absenteeism: flextime (starting and stopping times vary within limits); permanent part-time employment (regular employment carried out during shorter working hours); and job sharing (two or more part-time employees share one full-time…

Conceptualising forensic science and forensic reconstruction. Part II: The critical interaction between research, policy/law and practice.

PubMed

Morgan, R M

2017-11-01

This paper builds on the FoRTE conceptual model presented in part I to address the forms of knowledge that are integral to the four components of the model. Articulating the different forms of knowledge within effective forensic reconstructions is valuable. It enables a nuanced approach to the development and use of evidence bases to underpin decision-making at every stage of a forensic reconstruction by enabling transparency in the reporting of inferences. It also enables appropriate methods to be developed to ensure quality and validity. It is recognised that the domains of practice, research, and policy/law intersect to form the nexus where forensic science is situated. Each domain has a distinctive infrastructure that influences the production and application of different forms of knowledge in forensic science. The channels that can enable the interaction between these domains, enhance the impact of research in theory and practice, increase access to research findings, and support quality are presented. The particular strengths within the different domains to deliver problem solving forensic reconstructions are thereby identified and articulated. It is argued that a conceptual understanding of forensic reconstruction that draws on the full range of both explicit and tacit forms of knowledge, and incorporates the strengths of the different domains pertinent to forensic science, offers a pathway to harness the full value of trace evidence for context sensitive, problem-solving forensic applications. Copyright © 2017 The Author. Published by Elsevier B.V. All rights reserved.

29 CFR 4901.31 - Charges for services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... operating duplicating machinery. Not included in direct costs are overhead expenses such as costs of space... this part, in a form that is reasonably usable by the requester. Copies can take the form of paper copy... scholarly research. (ii) Noncommercial scientific institution means an institution that is not operated on a...

29 CFR 4901.31 - Charges for services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... operating duplicating machinery. Not included in direct costs are overhead expenses such as costs of space... this part, in a form that is reasonably usable by the requester. Copies can take the form of paper copy... scholarly research. (ii) Noncommercial scientific institution means an institution that is not operated on a...

29 CFR 4901.31 - Charges for services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... operating duplicating machinery. Not included in direct costs are overhead expenses such as costs of space... this part, in a form that is reasonably usable by the requester. Copies can take the form of paper copy... scholarly research. (ii) Noncommercial scientific institution means an institution that is not operated on a...

48 CFR 315.204-5 - Part IV-Representations and instructions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... as using too few.) (3) Examples of topics that form a basis for evaluation factors. Typical examples of topics that form a basis for the development of evaluation factors are listed in the following... special research, test, and other equipment or facilities. (vii) Managerial capability (ability to achieve...

48 CFR 315.204-5 - Part IV-Representations and instructions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... as using too few.) (3) Examples of topics that form a basis for evaluation factors. Typical examples of topics that form a basis for the development of evaluation factors are listed in the following... special research, test, and other equipment or facilities. (vii) Managerial capability (ability to achieve...

48 CFR 315.204-5 - Part IV-Representations and instructions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... as using too few.) (3) Examples of topics that form a basis for evaluation factors. Typical examples of topics that form a basis for the development of evaluation factors are listed in the following... special research, test, and other equipment or facilities. (vii) Managerial capability (ability to achieve...

Evaluation of the internal construct validity of the Personal Care Participation Assessment and Resource Tool (PC-PART) using Rasch analysis.

PubMed

Darzins, Susan; Imms, Christine; Di Stefano, Marilyn; Taylor, Nicholas F; Pallant, Julie F

2014-11-05

The Personal Care Participation Assessment and Resource Tool (PC-PART) is a 43-item, clinician-administered assessment, designed to identify patients' unmet needs (participation restrictions) in activities of daily living (ADL) required for community life. This information is important for identifying problems that need addressing to enable, for example, discharge from inpatient settings to community living. The objective of this study was to evaluate internal construct validity of the PC-PART using Rasch methods. Fit to the Rasch model was evaluated for 41 PC-PART items, assessing threshold ordering, overall model fit, individual item fit, person fit, internal consistency, Differential Item Functioning (DIF), targeting of items and dimensionality. Data used in this research were taken from admission data from a randomised controlled trial conducted at two publically funded inpatient rehabilitation units in Melbourne, Australia, with 996 participants (63% women; mean age 74 years) and with various impairment types. PC-PART items assessed as one scale, and original PC-PART domains evaluated as separate scales, demonstrated poor fit to the Rasch model. Adequate fit to the Rasch model was achieved in two newly formed PC-PART scales: Self-Care (16 items) and Domestic Life (14 items). Both scales were unidimensional, had acceptable internal consistency (PSI =0.85, 0.76, respectively) and well-targeted items. Rasch analysis did not support conventional summation of all PC-PART item scores to create a total score. However, internal construct validity of the newly formed PC-PART scales, Self-Care and Domestic Life, was supported. Their Rasch-derived scores provided interval-level measurement enabling summation of scores to form a total score on each scale. These scales may assist clinicians, managers and researchers in rehabilitation settings to assess and measure changes in ADL participation restrictions relevant to community living. Data used in this research were gathered during a registered randomised controlled trial: Australian and New Zealand Clinical Trials Registry ACTRN12609000973213. Ethics committee approval was gained for secondary analysis of data for this study.

78 FR 23824 - Reports, Forms, and Record Keeping Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-22

..., Contracting Officer's Technical Representative, Office of Behavioral Safety Research (NTI-132), National... descriptive solicitation. The drivers will be asked a series of seven questions to determine eligibility to... on the Nation's highways. As part of this statutory mandate, NHTSA is authorized to conduct research...

An Analysis of the Role and Responsibilities of Chairs of Further Education College and Sixth-Form College Governing Bodies in England

ERIC Educational Resources Information Center

Hill, Ron; James, Chris

2017-01-01

This article reports research into the role and responsibilities of the chairs of governing bodies of further education colleges and sixth-form colleges in England. Further education colleges and sixth-form colleges represent a significant part of post-16 educational provision in England. Every college in the sector has a governing body, which has…

From SHAPE Signatures to 3-D Structures | Center for Cancer Research

Cancer.gov

RNAs undergo extensive folding to form sophisticated based-paired secondary structures that are, in part, indicators of more complex three-dimensional structures.  These 3-D shapes are an integral part of the cellular gene-expression machinery. Deconstructing these structures is no small matter, yet it is critical to understanding their function.

Higher Order Cumulant Studies of Ocean Surface Random Fields from Satellite Altimeter Data

NASA Technical Reports Server (NTRS)

Cheng, B.

1996-01-01

Higher order statistics, especially 2nd order statistics, have been used to study ocean processes for many years in the past, and occupy an appreciable part of the research literature on physical oceanography. They in turn form part of a much larger field of study in statistical fluid mechanics.

Evidence for Structural Alignment during Similarity Judgments.

ERIC Educational Resources Information Center

Markman, Arthur B.; Gentner, Dedre

Similarity plays a central role in cognitive theories. Research has demonstrated that the similarity of a pair increases with its commonalities and decreases with its differences. These common and distinctive elements can take the form of parts of objects, relations between parts of properties of whole objects. Previous work has been unable to…

Some New Bases and Needs for Interior Design from Environmental Research. A Preliminary Survey.

ERIC Educational Resources Information Center

Kleeman, Walter, Jr.

Research which can form new bases for interior design is being greatly accelerated. Investigations in psychology, anthropology, psychiatry, and biology, as well as interdisciplinary projects, turn up literally hundreds of studies, the results of which will vitally affect interior design. This body of research falls into two parts--(1) human…

Welcome to PKTI.

ERIC Educational Resources Information Center

Whitmore, Kathryn F.; Norton-Meier, Lori A.

2000-01-01

Forms part of a themed issue describing "Parent-Kid-Teacher Investigators," a program in which parents, children, and teachers gather regularly to use language and literacy for action research projects. Explains the philosophy, assumptions, and intentions behind the program, and research that supports it. Offers action examples of how each belief…

76 FR 16629 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-24

... Project Formative Research to Develop Social Marketing Campaigns--Routine HIV Testing for Emergency... formative research study to support CDC's efforts in further developing three social marketing campaigns... component of the PIC social marketing campaign is to make HIV partner services a routine part of medical...

Space Research Institute (IKI) Exhibition as an Educational Project

NASA Astrophysics Data System (ADS)

Sadovski, Andrei; Antonenko, Elena

2016-07-01

The Exhibition "Space Science: Part and Future" in Space Research Institute (IKI) was opened in 2007 in commemoration of the 50th anniversary of the first man-made satellite launch. It covers the latest and the most important findings in space research, shows instruments which are used in space exploration, and presents past, current, and future Russian science missions. Prototypes of space instruments developed by Russian specialists and mockups of spacecraft and spaceships flown to space are displayed, together with information posters, describing space missions, their purposes and results. The Exhibition takes a great part in school space education. Its stuff actively works with schoolchildren, undergraduate students and also makes a great contribution in popularization of space researches. Moreover the possibility to learn about scientific space researches first-hand is priceless. We describe the main parts of the Exhibition and forms of it work and also describe the collaboration with other museums and educational organizations.

Embedding the New Science of Research: The Organised Culture of Scottish Educational Research in the Mid-Twentieth Century

ERIC Educational Resources Information Center

Lawn, Martin; Deary, Ian J.; Bartholomew, David J.; Brett, Caroline

2010-01-01

Educational research was established in the early decades of the twentieth century in many parts of Europe. The early years were the crucial years as they established dominant forms of inquiry, pioneer sites, and related artefacts, the tools and texts. This paper focuses on the early growth of research culture in education in Scotland, its…

E-Learning of Andalusian University's Lecturers. Gender

ERIC Educational Resources Information Center

Tena, Rosalía Romero; Almenara, Julio Cabero; Osuna, Julio Barroso

2016-01-01

This study forms part of the research project: "Use of eLearning in Andalusian Universities: current status and analysis of good practice". Our research focuses on two fundamental areas: firstly, the Virtual Andalusian Campus (VAC) as defined in the Digital University project set up by the Andalusia's Regional Administration, and…

78 FR 29114 - Endangered Species; File No. 17304

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-17

... Kristen Hart, Ph.D., U.S. Geological Survey, has applied in due form for a permit to take loggerhead... (Chelonia mydas) sea turtles for purposes of scientific research. DATES: Written, telefaxed, or email... species (50 CFR parts 222-226). The applicant requests a five-year research permit to determine...

The Importance of Familiarisation When Doing Research with Young Children

ERIC Educational Resources Information Center

Barley, Ruth; Bath, Caroline

2014-01-01

Becoming familiar with "the field" location and its inhabitants is a natural and important part of ethnographic research. However, little has been written about how operationalising a "familiarisation period" within an ethnography can form the foundation on which fieldwork can be built. By reflecting on the experience of…

In-Depth Cultural Studies in Multicultural Group

ERIC Educational Resources Information Center

Silina-Jasjukevica, Gunta; Briška, Ilze

2016-01-01

There is much research and educational practices at all levels of education on how to deal with promoting acceptance and understanding between different cultures. A cultural study forms an important part of shaping intercultural understanding. "The aim" of the research is to analyze an innovative way of incorporating cultural studies in…

Experimental investigations on the state of the friction-welded joint zone in steel hybrid components after process-relevant thermo-mechanical loadings

NASA Astrophysics Data System (ADS)

Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov, I.; Matthias, T.; Kolbasnikov, N.; Sokolov, S.; Ganin, S.

2016-10-01

As a part of the newly established Collaborative Research Center 1153 (SFB 1153) "Process chain for the manufacturing of hybrid high-performance components by tailored forming" at the Leibniz Universität Hannover, the Institute of Forming Technology and Machines (IFUM) examines the influence of thermo-mechanical stresses on the reduced Young's modulus as well as the hardness of hybrid (steel-steel compound) joined semi-finished products. Currently the expertise in the production of bulk metal formed parts is limited to mono-materials. For manufacturing parts of hybrid materials and also for the methods of the new process routes, practical experience has to be gained. The subproject C1 within the collaborative research center 1153 with the short title "Failure Prediction" deals with the question, if the hybrid semi-finished products fulfill the thermo-mechanical demands or if they fail at the joining zone (JZ) during forging. For this purpose, stresses similar to those in the process were imposed on hybrid semi-finished products by torsion tests by using the thermo-mechanical test system Gleeble 3800. Afterwards, the specimens were examined metallographically and by nanoindentations with the help of a TriboIndenter TI950. Thus, first knowledge on the behaviour of thermo-mechanical stresses on the reduced Young's modulus and the hardness of hybrid joined semi-finished parts was gained.

Short forms of the Texas Social Behavior Inventory /TSBI/, an objective measure of self-esteem

NASA Technical Reports Server (NTRS)

Helmreich, R.; Stapp, J.

1974-01-01

Two short (16 item) forms of the Helmreich, Stapp, and Ervin (1974) Texas Social Behavior Inventory, a validated, objective measure of self-esteem or social competence are presented. Normative data and other statistics are described for males and females. Correlations between each short form and long (32-item) scale were .97. Factor analysis and part-whole correlations verified the similarity of the two forms. The utility of the scale in research is described.

How to Get Published, Part I

ERIC Educational Resources Information Center

Lonergan, David

2011-01-01

Some librarians are required to publish a certain amount as part of earning tenure. Some choose to do research and write articles as a form of self-expression, because of intellectual curiosity, or perhaps to justify bearing faculty status. For whatever reason(s) librarians might want (or need) to see their own work in print, this article offers…

Society, the City and the Space-Economy of Urbanism, Resource Paper No. 18.

ERIC Educational Resources Information Center

Harvey, David

Theoretical concepts of spatial organization appropriate to bringing about humanizing social change are identified. This resource paper is part of a series designed to supplement existing texts and to fill a gap between research and accessible materials in geography. Part 1, societies and cities, introduces three basic forms of society:…

How Can We Improve through Pupil Participation? An Infants School Experience

ERIC Educational Resources Information Center

Ceballos López, Noelia; Susinos Rada, Teresa; Saiz Linares, Ángela

2016-01-01

This paper is part of a research project and forms part of a doctoral thesis in development whose aim was to promote and encourage improvement in schools based on the student voice. We believe that student participation is essential in order to progress towards inclusive educational communities. We present the main conclusions obtained in two…

Moving to the Next Generation System Design: Integrating Cognition, Assessment, and Learning. CSE Report 706

ERIC Educational Resources Information Center

Baker, Eva L.

2007-01-01

This paper will describe the relationships between research on learning and its application in assessment models and operational systems. These have been topics of research at the National Center for Research on Evaluation, Standards, and Student Testing (CRESST) for more than 20 years and form a significant part of the intellectual foundation of…

SSERVI: Merging Science and Human Exploration

NASA Technical Reports Server (NTRS)

Schmidt, Gregory; Gibbs, Kristina

2017-01-01

The NASA Solar System Exploration Research Virtual Institute (SSERVI) is a virtual institute focused on research and the intersection of science and exploration, training the next generation of lunar scientists, and community development. As part of the SSERVI mission, we act as a hub for the opportunities that engage the larger scientific and exploration communities in order to form a new interdisciplinary, research-focused collaborations.

The adequacy of informed consent forms in genetic research in Oman: a pilot study.

PubMed

Al-Riyami, Asya; Jaju, Deepali; Jaju, Sanjay; Silverman, Henry J

2011-08-01

Genetic research presents ethical challenges to the achievement of valid informed consent, especially in developing countries with areas of low literacy. During the last several years, a number of genetic research proposals involving Omani nationals were submitted to the Department of Research and Studies, Ministry of Health, Oman. The objective of this paper is to report on the results of an internal quality assurance initiative to determine the extent of the information being provided in genetic research informed consent forms. In order to achieve this, we developed checklists to assess the inclusion of basic elements of informed consent as well as elements related to the collection and future storage of biological samples. Three of the authors independently evaluated and reached consensus on seven informed consent forms that were available for review. Of the seven consent forms, four had less than half of the basic elements of informed consent. None contained any information regarding whether genetic information relevant to health would be disclosed, whether participants may share in commercial products, the extent of confidentiality protections, and the inclusion of additional consent forms for future storage and use of tissue samples. Information regarding genetic risks and withdrawal of samples were rarely mentioned (1/7), whereas limits on future use of samples were mentioned in 3 of 7 consent forms. Ultimately, consent forms are not likely to address key issues regarding genetic research that have been recommended by research ethics guidelines. We recommend enhanced educational efforts to increase awareness, on the part of researchers, of information that should be included in consent forms. © 2011 Blackwell Publishing Ltd.

Approaches for springback reduction when forming ultra high-strength sheet metals

NASA Astrophysics Data System (ADS)

Radonjic, R.; Liewald, M.

2016-11-01

Nowadays, the automotive industry is challenged constantly by increasing environmental regulations and the continuous enhancement of standards with regard to passenger's safety (NCAP, Part 1). In order to fulfil the aforementioned requirements, the use of ultra high-strength steels in research and industrial applications is of high interest. When forming such materials, the main problem results from the large amount of springback which occurs after the release of the part. This paper shows the applicability of several approaches for the reduction of springback amount by forming of one hat channel shaped component. A novel approach for springack reduction which is based on forming with an alternating blank draw-in is presented as well. In this investigation an ultra high-strength steel of the grade DP 980 was used. The part's measurements were taken at significant cross-sections in order to provide a qualitative comparison between the reference geometry and the part's released shape. The obtained results were analysed and used in order to quantify the success of particular approaches for springback reduction. When taking a curved hat channel shaped component as an example, the results achieved in the investigations showed that it is possible to reduce part shape deviations significantly when using DP 980 as workpiece material.

Rigour in quantitative research.

PubMed

Claydon, Leica Sarah

2015-07-22

This article which forms part of the research series addresses scientific rigour in quantitative research. It explores the basis and use of quantitative research and the nature of scientific rigour. It examines how the reader may determine whether quantitative research results are accurate, the questions that should be asked to determine accuracy and the checklists that may be used in this process. Quantitative research has advantages in nursing, since it can provide numerical data to help answer questions encountered in everyday practice.

Testing single point incremental forming moulds for rotomoulding operations

NASA Astrophysics Data System (ADS)

Afonso, Daniel; de Sousa, Ricardo Alves; Torcato, Ricardo

2017-10-01

Low pressure polymer processes as thermoforming or rotational moulding use much simpler moulds than high pressure processes like injection. However, despite the low forces involved in the process, moulds manufacturing for these applications is still a very material, energy and time consuming operation. Particularly in rotational moulding there is no standard for the mould manufacture and very different techniques are applicable. The goal of this research is to develop and validate a method for manufacturing plastically formed sheet metal moulds by single point incremental forming (SPIF) for rotomoulding and rotocasting operations. A Stewart platform based SPIF machine allow the forming of thick metal sheets, granting the required structural stiffness for the mould surface, and keeping a short manufacture lead time and low thermal inertia. The experimental work involves the proposal of a hollow part, design and fabrication of a sheet metal mould using dieless incremental forming techniques and testing its operation in the production of prototype parts.

Integrated Primary Care Teams (IPCT) pilot project in Quebec: a protocol paper

PubMed Central

Contandriopoulos, Damien; Duhoux, Arnaud; Roy, Bernard; Amar, Maxime; Bonin, Jean-Pierre; Borges Da Silva, Roxane; Brault, Isabelle; Dallaire, Clémence; Dubois, Carl-Ardy; Girard, Francine; Jean, Emmanuelle; Larue, Caroline; Lessard, Lily; Mathieu, Luc; Pépin, Jacinthe; Cockenpot, Aurore

2015-01-01

Introduction The overall aim of this project is to help develop knowledge about primary care delivery models likely to improve the accessibility, quality and efficiency of care. Operationally, this objective will be achieved through supporting and evaluating 8 primary care team pilot sites that rely on an expanded nursing role within a more intensive team-based, interdisciplinary setting. Methods and analysis The first research component is aimed at supporting the development and implementation of the pilot projects, and is divided into 2 parts. The first part is a logical analysis based on interpreting available scientific data to understand the causal processes by which the objectives of the intervention being studied may be achieved. The second part is a developmental evaluation to support teams in the field in a participatory manner and thereby learn from experience. Operationally, the developmental evaluation phase mainly involves semistructured interviews. The second component of the project design focuses on evaluating pilot project results and assessing their costs. This component is in turn made up of 2 parts. Part 1 is a pre-and-post survey of patients receiving the intervention care to analyse their care experience. In part 2, each patient enrolled in part 1 (around 4000 patients) will be matched with 2 patients followed within a traditional primary care model, so that a comparative analysis of the accessibility, quality and efficiency of the intervention can be performed. The cohorts formed in this way will be followed longitudinally for 4 years. Ethics and dissemination The project, as well as all consent forms and research tools, have been accepted by 2 health sciences research ethics committees. The procedures used will conform to best practices regarding the anonymity of patients. PMID:26700294

Encouraging Empathy through Aesthetic Engagement: An Art Lesson in Living Compositions

ERIC Educational Resources Information Center

Riddett-Moore, Karinna

2009-01-01

This paper demonstrates how aesthetic engagement can encourage empathy and caring in the art classroom. As artful inquiry, this hybrid form of arts-based educational research and teacher research examines my own classroom practice and pedagogy exploring how aesthetics can become a philosophy of care. Part 1 outlines the "Living Compositions…

The Evolution and Practice of Institutional Research

ERIC Educational Resources Information Center

Taylor, John; Hanlon, Martin; Yorke, Mantz

2013-01-01

Although institutional research has been a significant feature of U.S. higher education for more than 50 years, it is not so well understood in other parts of the world. As higher education around the world faces increasingly challenging times in responding to pressures of massification and globalization, increasing forms of accountability and…

Searching for Autonomy: Young Black Men, Schooling and Aspirations

ERIC Educational Resources Information Center

Law, Ian; Finney, Sarah; Swann, Sarah Jane

2014-01-01

This article examines the relationships between being young and black, and educational and career aspirations, drawing on new research evidence from two recent studies carried out in two urban locations in Northern England. The first of these studies forms part of a wider research project concerned with analysing the connections between aspects of…

What happened after the evaluation?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C L

1999-03-12

An ergonomics program including a ergonomic computer workstation evaluations at a research and development facility was assessed three years after formal implementation. As part of the assessment, 53 employees who had been subjects of computer workstation evaluations were interviewed. The documented reports (ergonomic evaluation forms) of the ergonomic evaluations were used in the process of selecting the interview subjects. The evaluation forms also provided information about the aspects of the computer workstation that were discussed and recommended as part of the evaluation, although the amount of detail and completeness of the forms varied. Although the results were mixed and reflectivemore » of the multivariate psychosocial factors affecting employees working in a large organization, the findings led to recommendations for improvements of the program.« less

Research on the innovative hybrid impact hydroforming

NASA Astrophysics Data System (ADS)

Lang, Lihui; Wang, Shaohua; Yang, Chunlei

2013-12-01

The innovative hybrid impact hydro-forming (IHF) technology is a kind of high strain rate forming technique which can be used for forming complex parts with small features, such as convex tables, bars etc. The present work investigates IHF using a numerical /experimental approach. In this paper, the theory of IHF is presented and finite element simulation was carried out by using MSC. The pressure distribution changes in the depth direction, but not in the width direction. However, the pressure is uniform everywhere in traditional hydro-forming. Using this shock wave loading conditions, forming experiments were carried out. Punching occurred as a result of combined tensile and shear stress effects. Furthermore, results show that using IHF technology, the design constraint to make precise die may be considerably reduced. The need to accurately control punch-die clearance may also be eliminated. Therefore, the research is very useful for forming complicated products.

The Multi-Disciplinary Graduate Program in Educational Research. Final Report, Part IV; The Utilization of Sociological Ideas in Organizational Planning: A Case Study.

ERIC Educational Resources Information Center

Lazarsfeld, Paul F., Ed.

This document, the fourth in the final report on the Multi-Disciplinary Graduate Program in Educational Research, is a qualitative case study designed to show the form of sociological contributions to and the role of sociologists in policy formulation at an American Educational Research Association (AERA) colloquium. Discussions at the conference…

Value Chain, Stakeholders Analysis and Technology: A Holistic and Integrated Approach for Determining the Cumulative Added Value of Education

ERIC Educational Resources Information Center

Ben Khudair, Saud Abdullah; Abdalla, Abdalla Khidir

2016-01-01

The research problem addressed in this study focused on the students' assessment issue. Although the assessment of student learning should form part of the curriculum of school programs, many educational institutions do not make student assessment part of their teaching and learning routines. A holistic and integrated framework, which encompasses…

A Tradition of Tolerance: What Wisconsin Parents Think about Teen Alcohol Use; and Executive Summary.

ERIC Educational Resources Information Center

Wisconsin State Dept. of Public Instruction, Madison.

A two-part study involving qualitative research in the form of focus groups and a quantitative telephone survey examined the extent of drug and alcohol use by school-age children and the behaviors and attitudes surrounding it. Results indicate that Wisconsin parents are comfortable with alcohol use, considering it a part of their culture, although…

"We Did the How to Teach It": Music Teaching and Learning in Higher Education in Australia

ERIC Educational Resources Information Center

Joseph, Dawn

2015-01-01

The Australian Government recognizes that the Arts are a critical part of formal school education and it should not be viewed as subordinate or extra. This paper forms part of a wider research project titled "Pre-service teacher attitudes and understandings of Music Education" that started in 2013. The focus of this paper investigates…

Scholarship, publication, and career advancement in health professions education: AMEE Guide No. 43.

PubMed

McGaghie, William C

2009-07-01

Scholarship and publication are key contributors to career advancement in health professions education worldwide. Scholarship is expressed in many ways including original research; integration and synthesis of ideas and data, often across disciplines; application of skill and knowledge to problems that have consequences for health professionals, students, and patients; and teaching in many forms. Professional publication also has diverse outlets ranging from empirical articles in peer reviewed journals, textbook chapters, videos, simulation technologies, and many other means of expression. Scholarship and publication are evaluated and judged using criteria that are consensual, public, and transparent. This three-part AMEE Guide presents advice about how to prepare and publish health professions education research reports and other forms of scholarship in professional journals and other outlets. Part One addresses scholarship-its varieties, assessment, and attributes of productive scholars and scholarly teams. Part Two maps the road to publication, beginning with what's important and reportable and moving to manuscript planning and writing, gauging manuscript quality, manuscript submission and review, and writing in English. Part Three offers 21 practical suggestions about how to advance a successful and satisfying career in the academic health professions. Concluding remarks encourage health professions educators to pursue scholarship with vision and reflection.

The advancement of a new human factors report--'The Unique Report'--facilitating flight crew auditing of performance/operations as part of an airline's safety management system.

PubMed

Leva, M C; Cahill, J; Kay, A M; Losa, G; McDonald, N

2010-02-01

This paper presents the findings of research relating to the specification of a new human factors report, conducted as part of the work requirements for the Human Integration into the Lifecycle of Aviation Systems project, sponsored by the European Commission. Specifically, it describes the proposed concept for a unique report, which will form the basis for all operational and safety reports completed by flight crew. This includes all mandatory and optional reports. Critically, this form is central to the advancement of improved processes and technology tools, supporting airline performance management, safety management, organisational learning and knowledge integration/information-sharing activities. Specifically, this paper describes the background to the development of this reporting form, the logic and contents of this form and how reporting data will be made use of by airline personnel. This includes a description of the proposed intelligent planning process and the associated intelligent flight plan concept, which makes use of airline operational and safety analyses information. Primarily, this new reporting form has been developed in collaboration with a major Spanish airline. In addition, it has involved research with five other airlines. Overall, this has involved extensive field research, collaborative prototyping and evaluation of new reports/flight plan concepts and a number of evaluation activities. Participants have included both operational and management personnel, across different airline flight operations processes. Statement of Relevance: This paper presents the development of a reporting concept outlined through field research and collaborative prototyping within an airline. The resulting reporting function, embedded in the journey log compiled at the end of each flight, aims at enabling employees to audit the operations of the company they work for.

Partnership: A Development Strategy for Children. Action Research in Family and Early Childhood. UNESCO Education Sector Monograph No. 9.

ERIC Educational Resources Information Center

Wazir, Rekha; van Oudenhoven, Nico

There is an increasing tendency on the part of international development players to redefine their relationships as "partnerships." This paper explores the concept of development partnerships, particularly those formed for the benefit of children. A discussion of the differences in the context, form and substance of the discourses and settings in…

Modeling drying of three-dimensional pulp molded structures. Part I, Experimental program

Treesearch

Heike Nyist; John F. Hunt; Margit Tamasy-Bano

1998-01-01

Researchers at the USDA Forest Products Laboratory have developed a new three-dimensional structural panel, called FPL Spaceboard. This panel is formed using a U.S. patented three-dimensional mold capable of using a variety of fibrous materials with either the wet- or dry-forming process. Structurally, the panel departs from the traditional two-dimensional panel by...

Does involvement in a cohort study improve health and affect health inequalities? A natural experiment.

PubMed

Quick, Annie; Böhnke, Jan R; Wright, John; Pickett, Kate E

2017-01-25

Evidence suggests that the process of taking part in health research can improve participants' health, independent of any intended intervention. However, no research has yet explored whether these effects differ across socioeconomic groups. If the effect of mere participation in health research also has a social gradient this could increase health inequalities and bias research results. This study used the Born in Bradford family cohort (BIB) to explore whether simply taking part in BIB had improved participants' health and, if so, whether this effect was mediated by socioeconomic status. Survey data on self-reported health behaviours were collected between 2007 and 2010 as part of BIB. These were augmented by clinical data on birth weight. Pregnant women on their second pregnancy, joining BIB for the first time formed the control group. Their health was compared to women on their second pregnancy who had both pregnancies within the study, who formed the exposed group. In order to limit the inherent bias in a non-randomised study, propensity score analysis was used, matching on age, ethnicity, education and date of questionnaire. The results were then compared according to mothers' education. Of six outcomes tested, only alcohol consumption showed a statistically significant reduction with exposure to BIB (OR: 0.35, 95% CIs 0.13, 0.92). Although effect estimates were larger for women with higher education compared to lower education, these effects were not statistically significant. Despite one significant finding, these results overall are insufficient to conclude that simply taking part in BIB affected participants' health. We recommend that socioeconomic status is considered in future studies testing effects of research participation, and that randomised studies with larger sample sizes are conducted.

Science Teachers' Beliefs and Practices: Issues, Implications and Research Agenda

ERIC Educational Resources Information Center

Mansour, Nasser

2009-01-01

The study of teachers' beliefs forms part of the process of understanding how teachers conceptualize their work which in turn is important to the understanding of teachers' practices and their decisions in the classroom. A growing body of research argues that teachers' beliefs should be studied within a framework that is aware of the influence of…

Students' Research Experiences during Consulting Projects: Three Themes Emerging from Case Studies

ERIC Educational Resources Information Center

Phillips, Carissa M. Holler

2010-01-01

Student consulting projects, an advanced form of problem-based learning, allow students to apply the skills developed in their classes on behalf of client organizations. A review of selected case studies in business education and other management education literature shows that research is an integral part of this consulting process. More than…

Projectification of Doctoral Training? How Research Fields Respond to a New Funding Regime

ERIC Educational Resources Information Center

Torka, Marc

2018-01-01

Funding is an important mechanism for exercising influence over ever more parts of academic systems. In order to do so, funding agencies attempt to export their functional and normative prerequisites for financing to new fields. One essential requirement for fundees is then to construct research processes in the form of a project beforehand, one…

Toward Solutions: The Work of the Biology Action-Research Group. Learning in Science Project. Working Paper No. 29.

ERIC Educational Resources Information Center

Boe, Robyn; And Others

Many students, even after formal science instruction, have not developed a scientifically acceptable concept of "living,""animal," or "plant." Therefore, as part of the action-research phase of the Learning in Science Project, a working group was formed to explore (with teachers) some possible strategies aimed at…

Exploiting the oxidizing capabilities of laccases exploiting the oxidizing capabilities of laccases for sustainable chemistry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cannatelli, Mark D.

Part one of this dissertation research has focused on harnessing the ability of laccases to generate reactive para-quinones in situ from the corresponding hydroquinones, followed by reaction with a variety of nucleophiles to perform novel carbon-carbon, carbon-nitrogen, and carbon-sulfur bond forming reactions for the synthesis of new and existing compounds. In part two of this dissertation, the fundamental laccase-catalyzed coupling chemistry developed in part one was applied to functionalize the surface of kraft lignin.

Suggestions for Strategic Planning for the Office of Nonproliferation Research and Engineering

DTIC Science & Technology

2002-01-01

The Office of Nonproliferation Research and Engineering, part of the recently formed National Nuclear Security Administration within the Department...of Energy, conducts wide-ranging research for diverse end users at the federal and local level. As such, the Office faces a number of challenges in...planning methods. This report grew out of support provided to an advisory committee for the Office of Nonproliferation and National Security, an

Greenhouse gas emissions in the life-cycle of carrots and tomatoes : methods, data and results from a study of the types and amounts of carrots and tomatoes consumed in Sweden. With arable land use

DOT National Transportation Integrated Search

1997-03-01

The report was written as a part of an on-going research project called "Environmental Impacts of Quantifiable Consumption Patterns." Methods, data and resulrs form an assessment of the arable land use and some greenhouse gas emissions during part of...

Undergraduate Research Opportunities in OSS

NASA Astrophysics Data System (ADS)

Boldyreff, Cornelia; Capiluppi, Andrea; Knowles, Thomas; Munro, James

Using Open Source Software (OSS) in undergraduate teaching in universities is now commonplace. Students use OSS applications and systems in their courses on programming, operating systems, DBMS, web development to name but a few. Studying OSS projects from both a product and a process view also forms part of the software engineering curriculum at various universities. Many students have taken part in OSS projects as well as developers.

Targeted harassment, subcultural identity and the embrace of difference: a case study.

PubMed

Hodkinson, Paul; Garland, Jon

2016-09-01

This paper examines the significance of experiences and understandings of targeted harassment to the identities of youth subcultural participants, through case study research on goths. It does so against a context of considerable recent public discussion about the victimization of alternative subcultures and a surprising scarcity of academic research on the subject. The analysis presented indicates that, although individual direct experiences are diverse, the spectre of harassment can form an ever-present accompaniment to subcultural life, even for those who have never been seriously targeted. As such, it forms part of what it is to be a subcultural participant and comprises significant common ground with other members. Drawing upon classic and more recent understandings of how subcultural groups respond to broader forms of outside hostility, we show how the shared experience of feeling targeted for harassment tied in with a broader subcultural discourse of being stigmatized by a perceived 'normal' society. The role of harassment as part of this, we argue, contributed to the strength with which subcultural identities were felt and to a positive embrace of otherness. © London School of Economics and Political Science 2016.

Clive Bell, the Doctrine of Significant Form and Visual Arts Communication. (A Review of Sources.)

ERIC Educational Resources Information Center

McWhinnie, H. J.

This paper reviews some of the recent research relative to the thoughts and writings of the English art critic, Clive Bell, one of the leaders in British art criticism for the first part of the 20th century. Bell's conception of "art as significant form" is considered with specific reference to the following educators: (1) Roger Fry and…

Control of anisotropic shape deviation in single point incremental forming of paperboard

NASA Astrophysics Data System (ADS)

Stein, Philipp; Franke, Wilken; Hoppe, Florian; Hesse, Daniel; Mill, Katharina; Groche, Peter

2017-10-01

The increasing social demand for sustainable material use leads to new process strategies as well as to the use of new materials in nearly all industries. In light of this demand, paperboard shows potential to substitute polymer-based components while also exhibiting improved ecological properties. However, in contrast to polymer-based products, the forming limits of paperboard are relatively low. Therefore, three dimensional forming of paperboard is subject of current research. One area of research focuses on the control of the fiber orientation dependent anisotropic material behavior of industrial paperboard in forming processes. For an examined industrial paperboard, an average elongation at break of 1.2% in the so called machine direction (fiber preferential direction, MD) has been determined at standard climate conditions. In contrast, in cross-direction (orthogonal to the machine direction, CD) a value of 2.6% was observed. With increased moisture content of the specimens the difference between the mechanical properties in MD and CD even increases. As a result of the various fiber-orientation dependent mechanical properties, forming with symmetric tools leads to asymmetrically shaped final parts. Within this article, an approach to reduce the asymmetric shape of three-dimensional formed paperboard by using single point incremental forming technology is presented. For a free spatial processing strategy the 3D Servo Press Technology, which enables circular as well as free processing strategies, is used. Based on reference tests with a circular processing strategy, it is shown that by using an adapted, elliptical tool path, an almost symmetric shaped part can be formed.

Analytical solutions for sequentially coupled one-dimensional reactive transport problems Part I: Mathematical derivations

NASA Astrophysics Data System (ADS)

Srinivasan, V.; Clement, T. P.

2008-02-01

Multi-species reactive transport equations coupled through sorption and sequential first-order reactions are commonly used to model sites contaminated with radioactive wastes, chlorinated solvents and nitrogenous species. Although researchers have been attempting to solve various forms of these reactive transport equations for over 50 years, a general closed-form analytical solution to this problem is not available in the published literature. In Part I of this two-part article, we derive a closed-form analytical solution to this problem for spatially-varying initial conditions. The proposed solution procedure employs a combination of Laplace and linear transform methods to uncouple and solve the system of partial differential equations. Two distinct solutions are derived for Dirichlet and Cauchy boundary conditions each with Bateman-type source terms. We organize and present the final solutions in a common format that represents the solutions to both boundary conditions. In addition, we provide the mathematical concepts for deriving the solution within a generic framework that can be used for solving similar transport problems.

Ethnography: principles, practice and potential.

PubMed

Draper, Jan

2015-05-06

Ethnography is a methodology that is gaining popularity in nursing and healthcare research. It is concerned with studying people in their cultural context and how their behaviour, either as individuals or as part of a group, is influenced by this cultural context. Ethnography is a form of social research and has much in common with other forms of qualitative enquiry. While classical ethnography was characteristically concerned with describing 'other' cultures, contemporary ethnography has focused on settings nearer to home. This article outlines some of the underlying principles and practice of ethnography, and its potential for nursing and healthcare practice.

Our Hidden Past: Biology, Part 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Ray; Russell, Liane; Mazur, Peter

In their new home at "The Mouse House" at Y-12, researchers from ORNL's Biology Division conducted studies that led to standards such as dose rate effects that form the basis for current international standards for radiation exposure in humans.

Reflective crack mitigation guide for flexible pavements.

DOT National Transportation Integrated Search

2015-09-01

Reflective cracks form in pavements when hot-mix asphalt (HMA) overlays are placed over jointed and/or severely cracked rigid : and flexible pavements. In the first part of the research, survival analysis was conducted to identify the most appropriat...

Economic Abuse as an Invisible Form of Domestic Violence: A Multicountry Review.

PubMed

Postmus, Judy L; Hoge, Gretchen L; Breckenridge, Jan; Sharp-Jeffs, Nicola; Chung, Donna

2018-01-01

The predominant perception of intimate partner violence (IPV) as constituting physical violence can still dominate, particularly in research and media reports, despite research documenting multiple forms of IPV including sexual violence occurring between intimate partners and various forms of psychological and emotional abuse. One frequently hidden or "invisible" form of abuse perpetrated within intimate partner relationships is economic abuse, also referred to as financial abuse in much of the literature. While the links between gendered economic insecurity and economic abuse are emerging, there remains a lack of consistency about definitions within the United States and globally, as there is no agreed upon index with which to measure economic abuse. As such, the purpose of this article is to review and analyze the global literature focused on either economic or financial abuse to determine how it is defined and what measures are used to capture its prevalence and impact. The 46 peer-reviewed articles that met all inclusion criteria for analysis came from a range of countries across six continents. Our review found that there is growing clarity and consistency of terminologies being used in these articles and found some consistency in the use of validated measures. Since this research is in its "infancy," we need to have stronger collaborative efforts to use similar measures and terminology. Part of that collaborative effort is to consider how language and cultural differences may play a part in our understanding of economic abuse.

Using the Critical Incident Technique to Research Decision Making regarding Access to Training and Development in Medium-Sized Enterprises

ERIC Educational Resources Information Center

Coetzer, Alan; Redmond, Janice; Sharafizad, Jalleh

2012-01-01

Employees in small and medium-sized enterprises (SMEs) form part of a "disadvantaged" group within the workforce that receives less access to training and development (T&D) than employees in large firms. Prior research into reasons for the relatively low levels of employee participation in training and development has typically…

Safe and Encouraging Home Providing the Countdown to Leadership? Finnish Female Leaders' Childhood Memories

ERIC Educational Resources Information Center

Hyvärinen, Sanna; Uusiautti, Satu

2014-01-01

The purpose of this research was to dissect the connection between childhood homes and leadership. The study forms a part of a larger study on Finnish female leaders and their life paths. The following research question was set for this study: how did Finnish female leaders describe their childhood and home environment? It was studied through two…

Using a Brief Form of Problem-Based Learning in a Research Methods Class: Perspectives of Instructor and Students

ERIC Educational Resources Information Center

Elder, Anastasia D.

2015-01-01

Problem based learning (PBL) is an instructional method aimed at engaging students in collaboratively solving an ill-structured problem. PBL has been presented and researched as an overhaul of existing curriculum design, yet a modified version may be attractive to college instructors who desire active learning on the part of their students, but…

The Application of Clustering Techniques to Citation Data. Research Reports Series B No. 6.

ERIC Educational Resources Information Center

Arms, William Y.; Arms, Caroline

This report describes research carried out as part of the Design of Information Systems in the Social Sciences (DISISS) project. Cluster analysis techniques were applied to a machine readable file of bibliographic data in the form of cited journal titles in order to identify groupings which could be used to structure bibliographic files. Practical…

Exploring Methodologies for Researching Indigenous Knowledge of Plant Healing for Integration into Classroom Science: Insights Related to the Data Collection Phase

ERIC Educational Resources Information Center

Mpofu, Vongai; Mushayikwa, Emmanuel; Otulaja, Femi S.

2014-01-01

This article forms part of a major study being conducted in Zimbabwe to explore the possibilities of integrating indigenous knowledge of plant healing (Ikoph) into western-oriented classroom science. The article reports on an aspect of research methodology. This study explored appropriate strategies for gaining access to indigenous knowledge…

32 CFR Appendix D to Part 68 - Addendum for Education Services Between [Name of Educational Institution] and the U.S. Marine Corps

Code of Federal Regulations, 2014 CFR

2014-07-01

... Institution provides instruction via media. (4) When operating on a Marine base, provide library services to the Marine Corps base/installation for students in the form of research and reference materials (e.g... home campus. Services shall also include research and reference material in sufficient quantity to meet...

32 CFR Appendix D to Part 68 - Addendum for Education Services Between [Name of Educational Institution] and the U.S. Marine Corps

Code of Federal Regulations, 2013 CFR

2013-07-01

... Institution provides instruction via media. (4) When operating on a Marine base, provide library services to the Marine Corps base/installation for students in the form of research and reference materials (e.g... home campus. Services shall also include research and reference material in sufficient quantity to meet...

Simplifying informed consent for biorepositories: stakeholder perspectives.

PubMed

Beskow, Laura M; Friedman, Joëlle Y; Hardy, N Chantelle; Lin, Li; Weinfurt, Kevin P

2010-09-01

Complex and sometimes controversial information must be conveyed during the consent process for participation in biorepositories, and studies suggest that consent documents in general are growing in length and complexity. As a first step toward creating a simplified biorepository consent form, we gathered data from multiple stakeholders about what information was most important for prospective participants to know when making a decision about taking part in a biorepository. We recruited 52 research participants, 12 researchers, and 20 institutional review board representatives from Durham and Kannapolis, NC. These subjects were asked to read a model biorepository consent form and highlight sentences they deemed most important. On average, institutional review board representatives identified 72.3% of the sentences as important; researchers selected 53.0%, and participants 40.4% (P = 0.0004). Participants most often selected sentences about the kinds of individual research results that might be offered, privacy risks, and large-scale data sharing. Researchers highlighted sentences about the biorepository's purpose, privacy protections, costs, and participant access to individual results. Institutional review board representatives highlighted sentences about collection of basic personal information, medical record access, and duration of storage. The differing mandates of these three groups can translate into widely divergent opinions about what information is important and appropriate to include a consent form. These differences could frustrate efforts to move simplified forms--for biobanking as well as for other kinds of research--into actual use, despite continued calls for such forms.

Nonlinear flight control design using backstepping methodology

NASA Astrophysics Data System (ADS)

Tran, Thanh Trung

The subject of nonlinear flight control design using backstepping control methodology is investigated in the dissertation research presented here. Control design methods based on nonlinear models of the dynamic system provide higher utility and versatility because the design model more closely matches the physical system behavior. Obtaining requisite model fidelity is only half of the overall design process, however. Design of the nonlinear control loops can lessen the effects of nonlinearity, or even exploit nonlinearity, to achieve higher levels of closed-loop stability, performance, and robustness. The goal of the research is to improve control quality for a general class of strict-feedback dynamic systems and provide flight control architectures to augment the aircraft motion. The research is divided into two parts: theoretical control development for the strict-feedback form of nonlinear dynamic systems and application of the proposed theory for nonlinear flight dynamics. In the first part, the research is built on two components: transforming the nonlinear dynamic model to a canonical strict-feedback form and then applying backstepping control theory to the canonical model. The research considers a process to determine when this transformation is possible, and when it is possible, a systematic process to transfer the model is also considered when practical. When this is not the case, certain modeling assumptions are explored to facilitate the transformation. After achieving the canonical form, a systematic design procedure for formulating a backstepping control law is explored in the research. Starting with the simplest subsystem and ending with the full system, pseudo control concepts based on Lyapunov control functions are used to control each successive subsystem. Typically each pseudo control must be solved from a nonlinear algebraic equation. At the end of this process, the physical control input must be re-expressed in terms of the physical states by eliminating the pseudo control transformations. In the second part, the research focuses on nonlinear control design for flight dynamics of aircraft motion. Some assumptions on aerodynamics of the aircraft are addressed to transform full nonlinear flight dynamics into the canonical strict-feedback form. The assumptions are also analyzed, validated, and compared to show the advantages and disadvantages of the design models. With the achieved models, investigation focuses on formulating the backstepping control laws and provides an advanced control algorithm for nonlinear flight dynamics of the aircraft. Experimental and simulation studies are successfully implemented to validate the proposed control method. Advancement of nonlinear backstepping control theory and its application to nonlinear flight control are achieved in the dissertation research.

Microstructural and Mechanical Property Characterization of Shear Formed Aerospace Aluminum Alloys

NASA Technical Reports Server (NTRS)

Troeger, Lillianne P.; Domack, Marcia S.; Wagner, John A.

2000-01-01

Advanced manufacturing processes such as near-net-shape forming can reduce production costs and increase the reliability of launch vehicle and airframe structural components through the reduction of material scrap and part count and the minimization of joints. The current research is an investigation of the processing-microstructure-property relationships for shear formed cylinders of the Al-Cu-Li-Mg-Ag alloy 2195 for space applications and the Al-Cu-Mg-Ag alloy C415 for airframe applications. Cylinders which had undergone various amounts of shear-forming strain were studied to correlate the grain structure, texture, and mechanical properties developed during and after shear forming.

Microstructural and Mechanical Characterization of Shear Formed Aluminum Alloys for Airframe and Space Applications

NASA Technical Reports Server (NTRS)

Troeger, L. P.; Domack, M. S.; Wagner, J. A.

1998-01-01

Advanced manufacturing processes such as near-net-shape forming can reduce production costs and increase the reliability of launch vehicle and airframe structural components through the reduction of material scrap and part count and the minimization of joints. The current research is an investigation of the processing-microstructure-property relationship for shear formed cylinders of the Al-Cu-Li-Mg-Ag alloy 2195 for space applications and the Al-Cu-Mg-Ag alloy C415 for airframe applications. Cylinders which have undergone various amounts of shear-forming strain have been studied to assess the microstructure and mechanical properties developed during and after shear forming.

Exploring resistance to implementation of welfare technology in municipal healthcare services - a longitudinal case study.

PubMed

Nilsen, Etty R; Dugstad, Janne; Eide, Hilde; Gullslett, Monika Knudsen; Eide, Tom

2016-11-15

Industrialized and welfare societies are faced with vast challenges in the field of healthcare in the years to come. New technological opportunities and implementation of welfare technology through co-creation are considered part of the solution to this challenge. Resistance to new technology and resistance to change is, however, assumed to rise from employees, care receivers and next of kin. The purpose of this article is to identify and describe forms of resistance that emerged in five municipalities during a technology implementation project as part of the care for older people. This is a longitudinal, single-embedded case study with elements of action research, following an implementation of welfare technology in the municipal healthcare services. Participants included staff from the municipalities, a network of technology developers and a group of researchers. Data from interviews, focus groups and participatory observation were analysed. Resistance to co-creation and implementation was found in all groups of stakeholders, mirroring the complexity of the municipal context. Four main forms of resistance were identified: 1) organizational resistance, 2) cultural resistance, 3) technological resistance and 4) ethical resistance, each including several subforms. The resistance emerges from a variety of perceived threats, partly parallel to, partly across the four main forms of resistance, such as a) threats to stability and predictability (fear of change), b) threats to role and group identity (fear of losing power or control) and c) threats to basic healthcare values (fear of losing moral or professional integrity). The study refines the categorization of resistance to the implementation of welfare technology in healthcare settings. It identifies resistance categories, how resistance changes over time and suggests that resistance may play a productive role when the implementation is organized as a co-creation process. This indicates that the importance of organizational translation between professional cultures should not be underestimated, and supports research indicating that focus on co-initiation in the initial phase of implementation projects may help prevent different forms of resistance in complex co-creation processes.

Selected Examples of NACA/NASA Supersonic Flight Research

NASA Technical Reports Server (NTRS)

Saltzman, Edwin J.; Ayers, Theodore G.

1995-01-01

The present Dryden Flight Research Center, a part of the National Aeronautics and Space Administration, has a flight research history that extends back to the mid-1940's. The parent organization was a part of the National Advisory Committee for Aeronautics and was formed in 1946 as the Muroc Flight Test Unit. This document describes 13 selected examples of important supersonic flight research conducted from the Mojave Desert location of the Dryden Flight Research Center over a 4 decade period beginning in 1946. The research described herein was either obtained at supersonic speeds or enabled subsequent aircraft to penetrate or traverse the supersonic region. In some instances there accrued from these research efforts benefits which are also applicable at lower or higher speed regions. A major consideration in the selection of the various research topics was the lasting impact they have had, or will have, on subsequent supersonic flight vehicle design, efficiency, safety, and performance or upon improved supersonic research techniques.

Rapid Prototyping of Application Specific Signal Processors (RASSP)

DTIC Science & Technology

1992-10-01

as well as government, research and and COMPASS , and how the improved plan academic institutions. CFI believes that effective might fit in with the... Compass ). libraries for COTS parts Tools and standards would be strongly based on - Ease of Use VHDL in its latest form(s). Block 2 would take * Open...EDIF Comrcial Rel:wased * Logic Inc. capture for Proprietary boards graphical language Logic Compass Schematic Proprietary EDIF; Commercial Released

Phronesis: Beyond the Research Ethics Committee-A Crucial Decision-Making Skill for Health Researchers During Community Research.

PubMed

Greeff, Minrie; Rennie, Stuart

2016-04-01

Health researchers conducting research in the community are often faced with unanticipated ethical issues that arise in the course of their research and that go beyond the scope of ethical approval by the research ethics committee. Eight expert researchers were selected through extreme intensity purposive sampling, because they are representative of unusual manifestations of the phenomenon related to their research in the community. They were selected to take part in a semi-structured focus group discussion on whether practical wisdom (phronesis) is used as a decision-making skill to solve unanticipated ethical issues during research in the community. Although the researchers were not familiar with the concept phronesis, it became obvious that it formed an integral part of their everyday existence and decision making during intervention research. They could balance research ethics with practical considerations. The capacity of practical wisdom as a crucial decision-making skill should be assimilated into a researcher's everyday reality, and also into the process of mentoring young researchers to become phronimos. Researchers should be taught this skill to handle unanticipated ethical issues. © The Author(s) 2016.

Anaphoric Descriptions

ERIC Educational Resources Information Center

Beller, Charley

2013-01-01

The study of definite descriptions has been a central part of research in linguistics and philosophy of language since Russell's seminal work "On Denoting" (Russell 1905). In that work Russell quickly dispatches analyses of denoting expressions with forms like "no man," "some man," "a man," and "every…

Origins of human cooperation and morality.

PubMed

Tomasello, Michael; Vaish, Amrisha

2013-01-01

From an evolutionary perspective, morality is a form of cooperation. Cooperation requires individuals either to suppress their own self-interest or to equate it with that of others. We review recent research on the origins of human morality, both phylogenetic (research with apes) and ontogenetic (research with children). For both time frames we propose a two-step sequence: first a second-personal morality in which individuals are sympathetic or fair to particular others, and second an agent-neutral morality in which individuals follow and enforce group-wide social norms. Human morality arose evolutionarily as a set of skills and motives for cooperating with others, and the ontogeny of these skills and motives unfolds in part naturally and in part as a result of sociocultural contexts and interactions.

WastePD, an innovative center on materials degradation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frankel, Gerald S.; Vienna, John; Lian, Jie

The US Department of Energy recently awarded funds to create the Center for Performance and Design of Nuclear Waste Forms and Containers (WastePD) as part of the Energy Frontier Research Center (EFRC) program. EFRCs are multi-investigator collaborations of universities, national labs and companies that “conduct fundamental research focusing on one or more “grand challenges” and use-inspired “basic research needs” identified in major strategic planning efforts by the scientific community.” The major performance parameter of nuclear waste forms is their ability to isolate the radionuclides by withstanding degradation in a repository environment over very long periods of time. So WastePD ismore » at heart a center focused on materials degradation.« less

Responding to the Challenges of KM Education in the LIS Sector: Some Academic and Professional Perspectives

ERIC Educational Resources Information Center

Hazeri, Afsaneh; Martin, Bill

2009-01-01

As a newly emerging field of study, KM education is faced with significant challenges which continue to evolve. Informed by wider organisational perspectives, this paper presents the findings of recent research into this field. The first part of the research was in the form of an online survey canvassing the views of the wider LIS community on the…

Personalised Medicine and the Economy of Biotechnological Promise.

PubMed

Sturdy, Steve

2017-04-01

Rather than seek to distinguish hype from legitimate promise, it may be more helpful to think about personalised medicine as embodying a promissory economy which serves both to mobilize resources for research and - partly at least - to determine the ends to which that research is directed. Personalised medicine is a development of the larger promissory economy of medical biotechnology. As such, it systematically conflates public benefit with the pursuit of commercial and especially pharmaceutical interests. Consequently, research and development in personalised medicine tends to favour the production of expensive new treatments over unprofitable forms of prevention or more effective use of older therapies. A rebalancing of research priorities is needed to favour the pursuit of public benefit, even when it does not deliver private profits. This will in turn require sustained reflection, self-criticism and often self-denial on the part of public research funders and the scientists they support.

Personalised Medicine and the Economy of Biotechnological Promise

PubMed Central

Sturdy, Steve

2017-01-01

Rather than seek to distinguish hype from legitimate promise, it may be more helpful to think about personalised medicine as embodying a promissory economy which serves both to mobilize resources for research and — partly at least — to determine the ends to which that research is directed. Personalised medicine is a development of the larger promissory economy of medical biotechnology. As such, it systematically conflates public benefit with the pursuit of commercial and especially pharmaceutical interests. Consequently, research and development in personalised medicine tends to favour the production of expensive new treatments over unprofitable forms of prevention or more effective use of older therapies. A rebalancing of research priorities is needed to favour the pursuit of public benefit, even when it does not deliver private profits. This will in turn require sustained reflection, self-criticism and often self-denial on the part of public research funders and the scientists they support. PMID:28517983

Reflections.

ERIC Educational Resources Information Center

Whitmore, Kathryn F.; Norton-Meier, Lori A.

2000-01-01

Forms part of a themed issue describing "Parent-Kid-Teacher Investigators," a program in which parents, children, and teachers gather regularly to use language and literacy for action research projects. Discusses ways in which schools and families are alike in building a supportive environment for learning. Illustrates conditions contributing to…

Esophageal Cancer—Patient Version

Cancer.gov

The most common types of esophageal cancer are adenocarcinoma and squamous cell carcinoma. These forms of esophageal cancer develop in some parts of the esophagus and are driven by genetic changes. Start here to find information on esophageal cancer treatment, causes and prevention, screening, research, and statistics.

NIH scientists identify molecular link between metabolism and breast cancer

Cancer.gov

A protein associated with conditions of metabolic imbalance, such as diabetes and obesity, may play a role in the development of aggressive forms of breast cancer, according to new findings by researchers at the National Cancer Institute (NCI), part of th

Rare kidney tumor provides insight on metabolic changes

Cancer.gov

Researchers in The Cancer Genome Atlas (TCGA) Network have uncovered a number of new findings about the biology and development of a rare form of kidney cancer. They found that the disease – chromophobe renal cell carcinoma – stems in part from alteratio

The 1983 direct strike lightning data, part 1

NASA Technical Reports Server (NTRS)

Thomas, Mitchel E.

1985-01-01

Data waveforms are presented which were obtained during the 1983 direct strike lightning tests utilizing the NASA F106-B aircraft specially instrumented for lightning electromagnetic measurements. The aircraft was operated in the vicinity of the NASA Langley Research Center, Hampton, Virginia, in a thunderstorm environment to elicit strikes. Electromagnetic field data and conduction currents on the aircraft were recorded for attached lightning. Part 1 contains 435 pages of lightning strike data in chart form.

The 1983 direct strike lightning data, part 2

NASA Technical Reports Server (NTRS)

Thomas, Mitchel E.

1985-01-01

Data waveforms are presented which were obtained during the 1983 direct strike lightning tests utilizing the NASA F106-B aircraft specially instrumented for lightning electromagnetic measurements. The aircraft was operated in the vicinity of the NASA Langley Research Center, Hampton, Virginia, in a thunderstorm environment to elicit strikes. Electromagnetic field data and conduction currents on the aircraft were recorded for attached lightning. Part 2 contains 443 pages of lightning strike data in chart form.

Spore-Forming Bacteria that Resist Sterilization

NASA Technical Reports Server (NTRS)

LaDuc, Myron; Venkateswaran, Kasthuri

2003-01-01

A report presents a phenotypic and genotypic characterization of a bacterial species that has been found to be of the genus Bacillus and has been tentatively named B. odysseensis because it was isolated from surfaces of the Mars Odyssey spacecraft as part of continuing research on techniques for sterilizing spacecraft to prevent contamination of remote planets by terrestrial species. B. odysseensis is a Gram-positive, facultatively anaerobic, rod-shaped bacterium that forms round spores. The exosporium has been conjectured to play a role in the elevated resistance to sterilization. Research on the exosporium is proposed as a path toward improved means of sterilization, medical treatment, and prevention of biofouling.

Research Of The Influence Of Reftinskii SDPP’S Ash On The Processes Of Cement Stone’S Structure Forming

NASA Astrophysics Data System (ADS)

Zimakova, G. A.; Solonina, V. A.; Zelig, M. P.

2017-01-01

The article describes the experimental research of cement stone. Cement stone forming involves highly dispersive mineral additive - ground ash. It is stated that the substitution of some part of cement with activated ash leaves cement strength high. This is possible due to the activity of ash in structure forming processes. Activation of ash provides the increase in its puzzolanic activity, complete hydration processes. it is stated that ash grinding leads to a selective crystallization hydrated neoformations. Their morthology is different on outer and inner surfaces of ash spheres. The usage of ash can provide cement economy on condition that rheological characteristics of concrete stay constant. Besides, the usage of ash will improve physical and mechanic characteristics of cement stone and concrete.

Development of Methods and Equipment for Sheet Stamping

NASA Astrophysics Data System (ADS)

Botashev, A. Yu; Bisilov, N. U.; Malsugenov, R. S.

2018-03-01

New methods of sheet stamping were developed: the gas forming with double-sided heating of a blank part and the gas molding with backpressure. In case of the first method the blank part is heated to the set temperature by means of a double-sided impact of combustion products of gas mixtures, after which, under the influence of gas pressure a stamping process is performed. In case of gas molding with backpressure, the blank part is heated to the set temperature by one-sided impact of the combustion products, while backpressure is created on the opposite side of the blank part by compressed air. In both methods the deformation takes place in the temperature range of warm or hot treatment due to the heating of a blank part. This allows one to form parts of complicated shape within one technological operation, which significantly reduces the cost of production. To implement these methods, original devices were designed and produced, which are new types of forging and stamping equipment. Using these devices, an experimental research on the stamping process was carried out and high-quality parts were obtained, which makes it possible to recommend the developed methods of stamping in the industrial production. Their application in small-scale production will allow one to reduce the cost price of stamped parts 2 or 3 times.

Foregut cancers get new attention at CCR | Center for Cancer Research

Cancer.gov

The newly formed NIH Foregut Team will focus on cancers of the esophagus, stomach, pancreas, liver, bile ducts and part of the small intestine. Although these tumors are not the most common types of cancers, they are among the deadliest. Learn more...

Global biology - An interdisciplinary scientific research program at NASA, Ames Research Center

NASA Technical Reports Server (NTRS)

Lawless, J. G.; Colin, L.

1983-01-01

NASA has initiated new effort in Global Biology, the primary focus of which is to understand biogeochemical cycles. As part of this effort, an interdisciplinary team of scientists has formed at Ames Research Center to investigate the cycling of sulfur in the marine coastal zone and to study the cycling of nitrogen in terrestrial ecosystems. Both studies will use remotely sensed data, coupled with ground-based research, to identify and measure the transfer of major and minor biologically produced gases between these ecosystems and global reservoirs.

Global Biology: An Interdisciplinary Scientific Research Program at NASA Ames Research Center

NASA Technical Reports Server (NTRS)

Lawless, James G.; Colin, Lawrence

1984-01-01

NASA has initiated new effort in Global Biology, the primary focus of which is to understand biogeochemical cycles. As part of this effort, an interdisciplinary team of scientists has formed at Ames Research Center to investigate the cycling of sulfur in the marine coastal zone and to study the cycling of nitrogen in terrestrial ecosystems. Both studies will use remotely sensed data, coupled with ground-based research, to identify and measure the transfer of major and minor biologically produced gases between these ecosystems and global reservoirs.

[Cultural anthropology of traditional Chinese medicine].

PubMed

Wan, Xia; Liu, Jian-ping; Ai, Yan-ke; Li, Liu-ji

2008-07-01

Biological, psychological and sociological model of medicine substantializes the old model lacking the social humane attributes. The new medical model makes people take medical anthropology into research and highly evaluate traditional medical system. Cultural anthropology of traditional Chinese medicine (TCM) is part of medical anthropology with three major characteristics: wide research scope, specificity, and integration. It has developed its own research methods, such as field investigation, comprehensive inspection and comparison study. Cultural anthropology provides an efficient research method for TCM, and its application would further develop TCM theory and form comprehensive evaluation on TCM effects.

The National Shipbuilding Research Program. Trailer Mounted Water Recovery and Reuse System

DTIC Science & Technology

2000-11-30

surfactants, and stabilize oil emulsions. • Sequestering or chelating agents bind problematic ions such as calcium or iron, which tend to form deposits on...cleaned parts. • Wetting/emulsifying agents (surfactants) help remove oil from dirty parts and stabilize the removed oil, preventing it from redepositing...neutralized; • The metal-loading can overcome the sequestering agents ’ capacity to keep the metals in solution; and • Oil and grease, if held in the emulsified

Characterization of Electron Beam Free-Form Fabricated 2219 Aluminum and 316 Stainless Steel

NASA Technical Reports Server (NTRS)

Ekrami, Yasamin; Forth, Scott C.; Waid, Michael C.

2011-01-01

Researchers at NASA Langley Research Center have developed an additive manufacturing technology for ground and future space based applications. The electron beam free form fabrication (EBF3) is a rapid metal fabrication process that utilizes an electron beam gun in a vacuum environment to replicate a CAD drawing of a part. The electron beam gun creates a molten pool on a metal substrate, and translates with respect to the substrate to deposit metal in designated regions through a layer additive process. Prior to demonstration and certification of a final EBF3 part for space flight, it is imperative to conduct a series of materials validation and verification tests on the ground in order to evaluate mechanical and microstructural properties of the EBF3 manufactured parts. Part geometries of EBF3 2219 aluminum and 316 stainless steel specimens were metallographically inspected, and tested for strength, fatigue crack growth, and fracture toughness. Upon comparing the results to conventionally welded material, 2219 aluminum in the as fabricated condition demonstrated a 30% and 16% decrease in fracture toughness and ductility, respectively. The strength properties of the 316 stainless steel material in the as deposited condition were comparable to annealed stainless steel alloys. Future fatigue crack growth tests will integrate various stress ranges and maximum to minimum stress ratios needed to fully characterize EBF3 manufactured specimens.

NASA's Solar System Exploration Research Virtual Institute: Building Collaboration Through International Partnerships

NASA Technical Reports Server (NTRS)

Gibbs, K. E.; Schmidt, G. K.

2017-01-01

The NASA Solar System Exploration Research Virtual Institute (SSERVI) is a virtual institute focused on re-search at the intersection of science and exploration, training the next generation of lunar scientists, and community development. As part of the SSERVI mission, we act as a hub for opportunities that engage the larger scientific and exploration communities in order to form new interdisciplinary, research-focused collaborations. This talk will describe the international partner re-search efforts and how we are engaging the international science and exploration communities through workshops, conferences, online seminars and classes, student exchange programs and internships.

Medical research--a comparative study of the situation in the RSA and in certain other countries.

PubMed

Brink, A J

1983-02-05

Research as a whole, with medical research as part thereof, is supported by organizational systems which differ in different countries. The basis for research support is nearly always one of two types: projects (short-term research) conducted by individuals, or programme research (a more extended form) carried out by a number of people in a defined field and under the direction of a person uniquely suited to lead the research. The other important form of research undertaking is one of national importance which assumes dimensions necessitating the creation of specific facilities in the form of buildings, research equipment and a staffing establishment (usually termed an 'institute'). Certain aspects relating to medical research as seen in other countries could well be adapted to our own needs, such as the introduction of research work communities (as found in Holland), and the establishment of priority research programmes in order to develop areas of neglect (as done in Germany). Adjustments can also be made to our training programmes and bursary schemes. In particular, attention can be paid to the re-employment of active research workers who have reached retirement age, and to the creation of full-time research posts in different categories at universities. In whatever manner our available research funds are calculated for comparison with those available elsewhere, whether based on money available per capita, size in relation to other research programmes or percentage of gross national product, the position of South Africa appears to be embarrassingly inferior.

Dimensions of Publicness and Performance in Substance Abuse Treatment Organizations

ERIC Educational Resources Information Center

Heinrich, Carolyn J.; Fournier, Elizabeth

2004-01-01

Changes in funding, clientele, and treatment practices of public and privately owned substance abuse treatment programs, compelled in part by increased cost containment pressures, have prompted researchers' investigations of the implications of organizational form for treatment programs. These studies primarily probe associations between ownership…

Young Children Being Rhythmically Playful: Creating "Musike" Together

ERIC Educational Resources Information Center

Alcock, Sophie

2008-01-01

This article explores young children's rhythmic, musical, aesthetic and playful creative communication in an early childhood education centre. Young children's communication is musically rhythmic and social. The data, presented as "events", formed part of an ethnographic-inspired study conducted by the researcher as a participant observer.…

The Global Virus Network: Challenging chikungunya

PubMed Central

McSweegan, Edward; Weaver, Scott C.; Lecuit, Marc; Frieman, Matthew; Morrison, Thomas E.; Hrynkow, Sharon

2016-01-01

The recent spread of chikungunya virus to the Western Hemisphere, together with the ongoing Ebola epidemic in West Africa, have highlighted the importance of international collaboration in the detection and management of disease outbreaks. In response to this need, the Global Virus Network (GVN) was formed in 2011. The GVN is a coalition of leading medical virologists in 34 affiliated laboratories in 24 countries, who collaborate to share their resources and expertise. The GVN supports research, promotes training for young scientists, serves as a technical resource for governments, businesses and international organizations, facilitates international scientific cooperation, and advocates for funding and evidence-based public policies. In response to the spread of chikungunya, the GVN formed a task force to identify research gaps and opportunities, including models of infection and disease, candidate vaccines and antivirals, epidemiology and vector control measures. Its members also serve as authoritative sources of information for the public, press, and policy-makers. This article forms part of a symposium in Antiviral Research on “Chikungunya discovers the New World”. PMID:26071007

Some recent developments in sheet metal forming for production of lightweight automotive parts

NASA Astrophysics Data System (ADS)

Tisza, M.; Lukács, Zs; Kovács, P.; Budai, D.

2017-09-01

Low cost manufacturing in the automotive industry is one of the main targets due to the ever increasing global competition among car manufacturers all over the World. Sheet metal forming is one of the most important key technologies in the automotive industry; therefore the elaboration of new, innovative low cost manufacturing processes is one of the main objectives in sheet metal forming as well. In 2015 with the initiative of the Imperial College London a research consortium was established under the umbrella Low Cost Materials Processing Technologies for Mass Production of Lightweight Vehicles. The primary aim of this project is to provide affordable low cost weight reduction in mass production of vehicles considering the entire life-cycle. In this project, 19 European Institutions (Universities and Research Institutions) from 9 European countries are participating with the above targets. The University of Miskolc is one of the members of this research Consortium. In this paper, some preliminary results with the contributions of the University of Miskolc will be introduced.

Development problem analysis of correlation leak detector’s software

NASA Astrophysics Data System (ADS)

Faerman, V. A.; Avramchuk, V. S.; Marukyan, V. M.

2018-05-01

In the article, the practical application and the structure of the correlation leak detectors’ software is studied and the task of its designing is analyzed. In the first part of the research paper, the expediency of the facilities development of correlation leak detectors for the following operating efficiency of public utilities exploitation is shown. The analysis of the functional structure of correlation leak detectors is conducted and its program software tasks are defined. In the second part of the research paper some development steps of the software package – requirement forming, program structure definition and software concept creation – are examined in the context of the usage experience of the hardware-software prototype of correlation leak detector.

Synchronous computer mediated group discussion.

PubMed

Gallagher, Peter

2005-01-01

Over the past 20 years, focus groups have become increasingly popular with nursing researchers as a data collection method, as has the use of computer-based technologies to support all forms of nursing research. This article describes the conduct of a series of focus groups in which the participants were in the same room as part of a "real-time" discussion during which they also used personal computers as an interface between each other and the moderator. Synchronous Computer Mediated Group Discussion differed from other forms of focus group discussion in that participants used personal computers rather than verbal expressions to respond to specific questions, engage in communication with other participants, and to record their thoughts. This form of focus group maintained many of the features of spoken exchanges, a cornerstone of the focus group, while capturing the advantages of online discussion.

Dynamic Pervasive Storytelling in Long Lasting Learning Games

ERIC Educational Resources Information Center

Pløhn, Trygve; Louchart, Sandy; Aalberg, Trond

2015-01-01

Pervasive gaming is a reality-based gaming genre originating from alternative theatrical forms in which the performance becomes a part of the players' everyday life. In recent years much research has been done on pervasive gaming and its potential applications towards specific domains. Pervasive games have been effective with regards to…

The makings of meteor astronomy: part VII.

NASA Astrophysics Data System (ADS)

Beech, M.

1994-08-01

The idea that meteors might be some form of "electrical manifestation" was a popular one for several decades near the end of the 18th century. The great fireball of August 18, 1783, prompted one researcher, Charles Blagden, to develop a detailed empirical model which described all manner of meteoric phenomena.

78 FR 4411 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

... potential study population is unique in that their children experienced newborn CMV screening as part of a previous research study. Universal CMV screening has not been recommended by medical associations or state.... Newborn CMV screening offers some clear potential benefits, but few studies have assessed the potential...

Visual Narrative Structure

ERIC Educational Resources Information Center

Cohn, Neil

2013-01-01

Narratives are an integral part of human expression. In the graphic form, they range from cave paintings to Egyptian hieroglyphics, from the Bayeux Tapestry to modern day comic books (Kunzle, 1973; McCloud, 1993). Yet not much research has addressed the structure and comprehension of narrative images, for example, how do people create meaning out…

Human Resource Management in Australian Registered Training Organisations

ERIC Educational Resources Information Center

Smith, Andrew; Hawke Geof

2008-01-01

This report forms part of a comprehensive research program that has examined issues related to building the organisational capability of vocational education and training providers. In particular, this report focuses on the current state of human resource management practice in both technical and further education and private registered training…

E-Homebook System: A Web-Based Interactive Education Interface

ERIC Educational Resources Information Center

Chen, Hsi-mei; Yu, Cris; Chang, Cheng-sian

2007-01-01

Children's academic performance and social competence in school is positively associated with parent involvement. However, the researches about educational learning models often ignore the parent part. Moreover, Internet forms a new paradigm, education and communication approach is more complicated than ever. In this paper, we would like to…

The Joint Chiefs of Staff and National Policy Volume III 1950-1951, The Korean War: Part One,

DTIC Science & Technology

1998-01-01

National Policy Volume III 1950-1951 The Korean War Part One James F . Schnabel Robert J. Watson Office of Joint History Office of the Chairman...transferred to other du- ties, Mr. James F . Schnabel assumed responsibility for the volume and planned, Foreword researched, and wrote the...into publishable form. JAMES F . SCHNABEL ROBERT J.WATSON vm Contents 1. Korea in US Policy, 1945-1950 1 The Partition of Korea 1 Establishment

Summary Technical Report of Division 14, NDRC. Volume 2. Military Airborne Radar Systems (MARS)

DTIC Science & Technology

1946-01-01

C, or to the Office of Naval Re- J&- search, Navy Department, Attention : Reports and Documents Section, Washington 25, D. C. Copy No. 777... attention , and as a result the National Defense Research Committee [NDRC] was formed by Executive Order of the President in the summer of 1940. The...War II. The book MARS consists of 24 chap- ters of which the first is general and the remaining 23 are divided into five parts. These parts

Cosmology: A research briefing

NASA Technical Reports Server (NTRS)

1995-01-01

As part of its effort to update topics dealt with in the 1986 decadal physics survey, the Board on Physics and Astronomy of the National Research Council (NRC) formed a Panel on Cosmology. The Panel produced this report, intended to be accessible to science policymakers and nonscientists. The chapters include an overview ('What Is Cosmology?'), a discussion of cosmic microwave background radiation, the large-scale structure of the universe, the distant universe, and physics of the early universe.

Research progress on synthesis and characteristic about dendrimers

NASA Astrophysics Data System (ADS)

Tang, Zitao

2017-12-01

Dendrimers are hyper-branched polymers which have perfectly defined structures. Different from the common polymers, dendrimers are synthesized by a step-by-step iterative style, which starts from a central core and forms branching parts outward. The dendrimers also have different physical and chemical characteristics from common polymers. In this paper, contributions to dendrimer synthesis from different researchers with different scientific background, synthesis of different dendrimers, and applications of them will be reviewed.

The Development of Children's Understanding of Distant Places and Environmental Issues: Report of a UK Longitudinal Study of the Development of Ideas between the Ages of 4 and 10 Years

ERIC Educational Resources Information Center

Palmer, Joy A.; Suggate, Jennifer

2004-01-01

The research reported here forms part of a major international study entitled "Emergent Environmentalism". The overall purpose of the Emergent Environmentalism research is to investigate the acquisition and development of environmental knowledge, awareness and concern in both adults and young children. This report is of the results of one aspect…

The Emerging Information Infrastructure: Players, Issues, Technology, and Strategies. Proceedings of Part I of the Meeting of the Association of Research Libraries (123rd, Arlington, Virginia, October 20-22, 1993).

ERIC Educational Resources Information Center

Mogge, Dru, Ed.; And Others

The topic of the 123rd meeting of the Association of Research Libraries (ARL) is the information infrastructure. The ARL is seeking to influence the policies that will form the backbone of the emerging information infrastructure. The first session concentrated on government roles and initiatives and included the following papers: "Opening…

Segmentation algorithm of colon based on multi-slice CT colonography

NASA Astrophysics Data System (ADS)

Hu, Yizhong; Ahamed, Mohammed Shabbir; Takahashi, Eiji; Suzuki, Hidenobu; Kawata, Yoshiki; Niki, Noboru; Suzuki, Masahiro; Iinuma, Gen; Moriyama, Noriyuki

2012-02-01

CT colonography is a radiology test that looks at people's large intestines(colon). CT colonography can screen many options of colon cancer. This test is used to detect polyps or cancers of the colon. CT colonography is safe and reliable. It can be used if people are too sick to undergo other forms of colon cancer screening. In our research, we proposed a method for automatic segmentation of the colon from abdominal computed Tomography (CT) images. Our multistage detection method extracted colon and spited colon into different parts according to the colon anatomy information. We found that among the five segmented parts of the colon, sigmoid (20%) and rectum (50%) are more sensitive toward polyps and masses than the other three parts. Our research focused on detecting the colon by the individual diagnosis of sigmoid and rectum. We think it would make the rapid and easy diagnosis of colon in its earlier stage and help doctors for analysis of correct position of each part and detect the colon rectal cancer much easier.

The Theory and Practice of Genre Criticism: Genre Criticism: The Analysis of Form, Part I; Genre Criticism: Judgment Argument and Evidence, Part II; [and] Genre Criticism: A Topical Bibliography, Part III.

ERIC Educational Resources Information Center

Creps, Earl

A three-part study of the forms of rhetorical criticism is offered. Part one reviews the nature of genre criticism, enumerates several concepts of form and the types of genre criticism they produce, and discusses the implications of this relationship between form and genre. Part two is an essay on the methodological implications of form-grounded…

NASA's Solar System Exploration Research Virtual Institute: Combining Science and Exploration

NASA Astrophysics Data System (ADS)

Bailey, B.; Schmidt, G.; Daou, D.; Pendleton, Y.

2015-10-01

The NASA Solar System Exploration Research Virtual Institute (SSERVI) is a virtual institute focused on research at the intersection of science andexploration, training the next generation of lunar scientists, and community development. As part of the SSERVI mission, we act as a hub for opportunities that engage the larger scientific and exploration communities in order to form new interdisciplinary, research-focused collaborations. This talk will describe the research efforts of the nine domestic teams that constitute the U.S. complement of the Institute and how we will engage the international science and exploration communities through workshops, conferences, online seminars and classes, student exchange programs and internships.

Postdoctoral Fellow | Center for Cancer Research

Cancer.gov

The Wolin laboratory has recently moved to the National Cancer Institute as part of a new initiative in RNA Biology. A fully funded postdoctoral position is available in the areas of noncoding RNA function, RNA surveillance pathways, and the mechanisms by which defects in RNA decay pathways contribute to diseases such as cancer and autoimmunity. We use mammalian cells and bacteria as complementary systems, and projects in both systems are available. Our group is part of the newly formed RNA Biology Laboratory in the Center for Cancer Research. We are part of the Center of Cancer Research’s RNA Initiative, which includes more than 50 laboratories evenly split between the Frederick and Bethesda campuses of the National Cancer Institute. The environment is highly collaborative and collegial, with the ability to interact with a wide range of scientists. The position is ideal for motivated candidates who are seeking additional training in RNA biology.

Research and industrialization of near-net rolling technology used in shaft parts

NASA Astrophysics Data System (ADS)

Hu, Zhenghuan; Wang, Baoyu; Zheng, Zhenhua

2017-11-01

Shaft part rolling is an efficient and green nearnet shaping technology offering many advantages, including high production efficiency, high material utilization rate, high product quality, and excellent production environment. In this paper, the features of shaft part rolling are introduced along with the working principles of two main shaft part rolling technologies, namely, cross wedge rolling (CWR) and skew rolling (SR). In relation to this technology, some R&D achievements gained by the University of Science and Technology Beijing are summarized. Finally, the latest developments in shaft part rolling are presented, including SR steel balls, precise forming of camshaft blank by CWR, SR phosphorous copper balls at room temperature, and CWR hollow axle sleeve. Although the shaft part rolling technology has been widely used in China, it only accounts for about 15% of applicable parts at present. Nevertheless, this technology has broad application prospects.

Research and industrialization of near-net rolling technology used in shaft parts

NASA Astrophysics Data System (ADS)

Hu, Zhenghuan; Wang, Baoyu; Zheng, Zhenhua

2018-03-01

Shaft part rolling is an efficient and green nearnet shaping technology offering many advantages, including high production efficiency, high material utilization rate, high product quality, and excellent production environment. In this paper, the features of shaft part rolling are introduced along with the working principles of two main shaft part rolling technologies, namely, cross wedge rolling (CWR) and skew rolling (SR). In relation to this technology, some R&D achievements gained by the University of Science and Technology Beijing are summarized. Finally, the latest developments in shaft part rolling are presented, including SR steel balls, precise forming of camshaft blank by CWR, SR phosphorous copper balls at room temperature, and CWR hollow axle sleeve. Although the shaft part rolling technology has been widely used in China, it only accounts for about 15% of applicable parts at present. Nevertheless, this technology has broad application prospects.

The infield varietu of available forms in the forest-steppe of western part Central Chernozemic region

NASA Astrophysics Data System (ADS)

Belik, Anton; Devyatova, Tatiana; Bozhko, Svetlana; Gorbunova, Yulia

2016-04-01

The infield varietu of available forms in the forest-steppe of western part Central Chernozemic region The Central Chernozemic region of Russia has been a region with a strong agricultural industry and determines the food security of the state by most part. The soil cover of the region is represented mainly by chernozems and is favorable for the cultivation of major crops and produce high crop yields. However, the high development of agriculture in the territory of Central Chernozemic region are led to the development of agrogenic degradation processes which impacts on the growth of the soil cover complexity and contrast, and as a consequence a significant infield variety of soil fertility and yields of major crops. In this regard, very promising direction in CChR is the development and practical application technologies of precision agriculture, which implies the spatial variety of soil fertility analysis within specific fields and work areas, especially the content of available forms of nutrients. The aim of our research was a study of the agro-ecological characteristics of the spatial variety of the content by available forms to plants of major nutrients in representative areas of sloping agricultural landscapes with forest-steppe chernozems in the western part of Central Chernozemic region of Russia. The research of infield variety by content of available forms of major nutrients are carried in the fields of Russian Research Institute of Agriculture and Protect the Soil from Erosion experimental and industrial farm in Medvensky district of Kursk region. The area characterized by a complex organization of relief. The soil cover is represented by full-profile typical (conventional and carbonate), leached chernozems. The growth of contrast of the soil cover are largely determined by the appearance of eroded soils of these analogues, as well as zoogenic dug and accumulative soils All of the studied areas with the forest-steppe chernozems were characterized by pronounced variation in the content of available forms of nitrogen, phosphorus and potassium. In the most varied contents of available phosphorus and potassium (coefficients of variation increase by 1.2 - 1.3 times as the complexity of the soil cover and reduced 1.3 - 1.6 times as reducing the area of the site and the growth detailed studies). The least within the fields of content of nitrogen are varied at its most high average grade. As the most important factors determining the spatial variety of the batteries for the phosphorus and potassium should be made kind of soil, the degree of erosion, the depth of the carbonates. The above factors the humus content is added the level of applied agricultural technologies and the history of land use within the studied areas for the nitrogen. Thus, the identification of significant infield variety in the content of available forms of nutrients in the forest-steppe chernozems is the result of processes of water erosion. In terms of slope forest-steppe agricultural landscapes of Central Chernozemic region of spatial variability of available forms of nitrogen, phosphorus and potassium is an important factor, which is limited the yields and causes the most promising application the technologies of precision agriculture.

Bio-optical profile data report coastal transition zone program, R/V Thomas Washington, June 24 - July 21, 1988

NASA Technical Reports Server (NTRS)

Davis, Curtiss O.; Rhea, W. Joseph

1990-01-01

Twenty-three vertical profiles of the bio-optical properties of the ocean were made during a research cruise on the R/V Thomas Washington, June 24 to July 21, 1988, as part of the Coastal Transition Zone Program off Point Arena, California. A summary is given, to provide investigators with an overview of the data collected. The entire data set is available in digital form for interested researchers.

GRIP Experiment 2010

NASA Image and Video Library

2010-08-16

A researcher points out the trajectory of a weather pattern on a computer monitor during a flight aboard the NASA DC-8 aircraft, Tuesday, Aug. 17, 2010, over the Gulf of Mexico. Sceintists and researchers flew Tuesday to study weather as part of the Genesis and Rapid Intensification Processes (GRIP) experiment is a NASA Earth science field experiment in 2010 that is being conducted to better understand how tropical storms form and develop into major hurricanes. Photo Credit: (NASA/Paul E. Alers)

Neil Hayes, M.D., M.P.H., Explains TCGA Findings on GBM Subtypes - TCGA

Cancer.gov

New findings by researchers at UNC Lineberger Comprehensive Cancer Center suggest that the most common form of malignant brain cancer in adults, glioblastoma multiforme (GBM), is probably not a single disease but a set of diseases, each with a distinct underlying molecular disease process. The study was published by Cell Press in the January issue of the journal Cancer Cell and the researchers are part of the The Cancer Genome Atlas.

What Expectations Do Sixth-Form Students Have of Their Learning and Their Teachers and What Expectations Do Teachers Have of Their Students? Stage One of the Action Research Cycle

ERIC Educational Resources Information Center

Deuker, Charmaine

2014-01-01

Action research is an invaluable resource, which can be utilised by those involved in teaching and learning as a reflective tool enabling a person to make informed decisions about their working practices. Developing and improving teaching skills is an essential part of the teacher's role so this method was used to explore concerns that were…

Importance Sampling, Large Deviations, and Differential Games

DTIC Science & Technology

2002-01-01

National Science Foundation (NSF- DMS-0072004, NSF-ECS-9979250) and the Army Research Office (DAAD19-00-1-0549, DAAD19-02-1-0425). �Research of this author...supported in part by the National Science Foundation (NSF- DMS-0103669). Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting...Process. Appl., 20:213�229, 1985. [2] S. Asmussen. Risk theory in a Markovian environment. Scand. Acturial J., pages 69�100, 1989. [3] S. Asmussen, R

Adaptive Importance Sampling for Uniformly Recurrent Markov Chains

DTIC Science & Technology

2003-01-01

the National Science Foundation (NSF- DMS-0072004, NSF-ECS-9979250) and the Army Research Office (DAAD19-00-1-0549, DAAD19-02-1-0425). †Research of this...author supported in part by the National Science Foundation (NSF- DMS-0103669). Report Documentation Page Form ApprovedOMB No. 0704-0188 Public...Appl., 20:213—229, 1985. [2] S. Asmussen. Risk theory in a Markovian environment. Scand. Acturial J., pages 69—100, 1989. [3] S. Asmussen, R

Continuing review of ethics in clinical trials: a surveillance study in Iran

PubMed Central

Mohamadi, Amin; Asghari, Fariba; Rashidian, Arash

2014-01-01

In recent years, notable measures have been taken to protect the rights of participants in biomedical research in Iran. The present study examines possible trends in adherence to ethical codes regarding informed consent after the development of the National Code of Ethics in Biomedical Research (NCEBR) and establishment of research ethics committees. In this retrospective study, 126 dissertations from Tehran University of Medical Sciences were evaluated for adherence to ethical codes. These dissertations were all in clinical trial design and had been presented in the years 1999 and 2009, that is, precisely before and after the development of the NCEBR. A checklist was developed to evaluate the ethical issues associated with informed consent. A single investigator retrieved and evaluated the consent forms from the dissertations. Borderline cases were discussed with other investigators to reach a consensus decision. Based on the checklist, the Standardized Ethical Score (SES) was calculated for each consent form. The mean SES and the rate of consent form attachment were compared between the two years. In total, 70 dissertations had reported obtaining informed consent from study participants, whereas consent forms were attached in only 22 dissertations (17.50%). The percentage of dissertations with the consent form attached increased over time from 12.2% in 1999 to 20.8% in 2009 (P > 0.05), but the majority still did not include a consent form. Moreover, the mean SES of consent forms was significantly higher in 1999 (0.746) than in 2009 (0.428), highlighting the need for more training of researchers and improved surveillance by the ethics committees. A great amount of effort is still needed to make the consent process more ethical, especially for dissertations as a less visible part of academic research. As for students, more systematic training focused on research ethics should be implemented prior to thesis submission. PMID:26587202

Technology Use and Learning Characteristics of Students in Higher Education: Do Generational Differences Exist?

ERIC Educational Resources Information Center

Lai, Kwok-Wing; Hong, Kian-Sam

2015-01-01

As digital technologies form an inextricable part of young people's everyday lives, some commentators claim that the current generation of learners think and learn differently from their predecessors. This study investigated the validity of this claim by surveying 799 undergraduate and 81 postgraduate students at a large research-intensive…

Learning about Our Community: From the Underground Railroad to School Lunch.

ERIC Educational Resources Information Center

Hicks, Bonnie; Montequin, Leah; Hicks, Jason

2000-01-01

Forms part of a themed issue describing "Parent-Kid-Teacher Investigators," a program in which parents, children, and teachers gather regularly to use language and literacy for action research projects. Offers a portrait of the weekly meetings. Summarizes what three particular groups learned about their topics: the underground railroad;…

Repeated Low Teaching Evaluations: A Form of Habitual Behaviour?

ERIC Educational Resources Information Center

Grayson, J. Paul

2015-01-01

Teaching evaluations have become part of life on Canadian campuses; however, there is no agreement among researchers as to their validity. In this article, comparisons were made between first- and third-year collective evaluations of professors' performance at the University of British Columbia, York University, and McGill University. Overall, it…

Learning by Observing a Peer's Teaching Situation

ERIC Educational Resources Information Center

Hendry, Graham D.; Bell, Amani; Thomson, Kate

2014-01-01

This article reports on a study of academics who observed their colleagues' teaching at a large research-intensive university in Australia. These academics had completed peer observation as part of a foundations programme designed for those new to teaching or new to the university. Survey responses and interview transcripts form the basis of an…

A Meta-Analysis of Massage Therapy Research

ERIC Educational Resources Information Center

Moyer, Christopher A.; Rounds, James; Hannum, James W.

2004-01-01

Massage therapy (MT) is an ancient form of treatment that is now gaining popularity as part of the complementary and alternative medical therapy movement. A meta-analysis was conducted of studies that used random assignment to test the effectiveness of MT. Mean effect sizes were calculated from 37 studies for 9 dependent variables. Single…

New Governance and New Knowledge Brokers: Think Tanks and Universities as Boundary Organizations

ERIC Educational Resources Information Center

Anderson, Gary; De La Cruz, Pedro; López, Andrea

2017-01-01

Educational researchers, along with universities in general, form part of the social field of knowledge production. Schools of education, as with all professional schools, are boundary organizations in the sense that they not only produce knowledge, but also train teachers, counselors, and administrators and have an impact on curriculum and…

Case-Study of the High School Student's Family Values Formation

ERIC Educational Resources Information Center

Valeeva, Roza A.; Korolyeva, Natalya E.; Sakhapova, Farida Kh.

2016-01-01

The aim of the research is the theoretical justification and experimental verification of content, complex forms and methods to ensure effective development of the high school students' family values formation. 93 lyceum students from Kazan took part in the experiment. To study students' family values we have applied method of studying personality…

Understanding Classrooms through Social Network Analysis: A Primer for Social Network Analysis in Education Research

ERIC Educational Resources Information Center

Grunspan, Daniel Z.; Wiggins, Benjamin L.; Goodreau, Steven M.

2014-01-01

Social interactions between students are a major and underexplored part of undergraduate education. Understanding how learning relationships form in undergraduate classrooms, as well as the impacts these relationships have on learning outcomes, can inform educators in unique ways and improve educational reform. Social network analysis (SNA)…

Children's Gestures and the Embodied Knowledge of Geometry

ERIC Educational Resources Information Center

Kim, Mijung; Roth, Wolff-Michael; Thom, Jennifer

2011-01-01

There is mounting research evidence that contests the metaphysical perspective of knowing as mental process detached from the physical world. Yet education, especially in its teaching and learning practices, continues to treat knowledge as something that is necessarily and solely expressed in ideal verbal form. This study is part of a funded…

Transforming Multicultural Teacher Education through Participatory Theatre: An Arts-Based Approach to Ethnographic Action Research

ERIC Educational Resources Information Center

Mitsumura, Masakazu

2012-01-01

Multivariate forms of social oppression, such as racism, linguicism, and heterosexism, are manifested in schools that, as part of our communities, reflect the societal stratification and structural inequalities of a larger society. Teacher educators engaged in multicultural education are responsible for providing pre-service teachers with…

The Impact of Foreign Policy on Educational Exchange: The Swedish State Scholarship Programme 1938-1990

ERIC Educational Resources Information Center

Åkerlund, Andreas

2014-01-01

Programmes of international educational exchange are not only carried out for educational purposes, but form an important part of modern-day public diplomacy. Through exchange programmes education and research are linked with foreign policy interests, which then in turn should affect the international contacts of universities and research…

Understanding the Graphical Challenges Faced by Vision-Impaired Students in Australian Universities

ERIC Educational Resources Information Center

Butler, Matthew; Holloway, Leona; Marriott, Kim; Goncu, Cagatay

2017-01-01

Information graphics such as plots, maps, plans, charts, tables and diagrams form an integral part of the student learning experience in many disciplines. However, for a vision impaired student accessing such graphical materials can be problematic. This research seeks to understand the current state of accessible graphics provision in Australian…

Learning from the Past to Shape the Future

ERIC Educational Resources Information Center

Smith, Kari

2017-01-01

This paper is a personal narrative of a journey from teaching to teacher educator, and researcher. The first part of the paper tells the professional story which at first glance is a rather common trajectory into teacher education, whereas changing contexts has formed development, perceptions and actions. The story is followed by a discussion of…

Adult Education & Social Change. Models for Adult and Lifelong Learning.

ERIC Educational Resources Information Center

Ntiri, Daphne W., Ed.

The four papers in this collection form part of the nucleus of research by a task force of advanced social science doctoral students who were foreign nationals enrolled in Midwestern universities. The first three papers, each a chapter situated within an interdisciplinary context, draw from politics, sociology, and history to define constructs on…

REPORT TO SAED OF GESAED-BUHRC TRAINING STUDY.

ERIC Educational Resources Information Center

HARRISON, ROGER; OSHRY, BARRY

A RESEARCH STUDY CONDUCTED BY THE SMALL AIRCRAFT ENGINE DEPARTMENT OF GENERAL ELECTRIC AND BOSTON UNIVERSITY HUMAN RELATIONS CENTER EXPLORED THE PERSONAL CHARACTERISTICS OF 47 T-GROUP PARTICIPANTS. IN PART 1, THE AUTHORS DISCUSS THE PREDICTOR MEASURES THAT WERE FORMED BEFORE TRAINING. AT THE END OF EACH LABORATORY EACH MEMBER AND THE TRAINERS…

Office Design: A Study of Environment.

ERIC Educational Resources Information Center

Manning, Peter, Ed.

Reporting upon a study of environment which was based on the design of office buildings and office space, the study forms part of a continuing program of environmental research sponsored by Pilkington Brothers Limited of St. Helens, England. In this report the word 'environment' is used in the sense of the sum of the physical and emotional…

Digital Learning Material for Model Building in Molecular Biology

ERIC Educational Resources Information Center

Aegerter-Wilmsen, Tinri; Janssen, Fred; Hartog, Rob; Bisseling, Ton

2005-01-01

Building models to describe processes forms an essential part of molecular biology research. However, in molecular biology curricula little attention is generally being paid to the development of this skill. In order to provide students the opportunity to improve their model building skills, we decided to develop a number of digital cases about…

Perceptions of Schooling, Pedagogy and Notation in the Lives of Visually-Impaired Musicians

ERIC Educational Resources Information Center

Baker, David; Green, Lucy

2016-01-01

This article discusses findings on schooling, pedagogy and notation in the life-experiences of amateur and professional visually-impaired musicians/music teachers, and the professional experiences of sighted music teachers who work with visually-impaired learners. The study formed part of a broader UK Arts and Humanities Research Council funded…

A Visual Haptic System for Children with Learning Disabilities: Software and Hardware Design Considerations

ERIC Educational Resources Information Center

Subrahmaniyan, Neeraja; Krishnaswamy, Swetha; Chowriappa, Ashirwad; Srimathveeravalli, Govindarajan; Bisantz, Ann; Shriber, Linda; Kesavadas, Thenkurussi

2012-01-01

Research has shown that children with learning disabilities exhibit considerable challenges with visual motor integration. While there are specialized Occupational Therapy interventions aimed at visual motor integration, computer games and virtual toys have now become increasingly popular, forming an integral part of children's learning and play.…

Torque Limit for Bolted Joint For Composites. Part B; Experimentation

NASA Technical Reports Server (NTRS)

Kostreva, Kristian M.

2003-01-01

Today, aerospace quality composite parts are generally made from either a unidirectional tape or a fabric prepreg form depending on the application. The matrix material, typically epoxy because of it dimensional stability, is pre-impregnated onto the fibers to ensure uniform distribution. Both of these composite forms are finding themselves used in applications where a joint is required. Two widely used joint methods are the classic mechanically fastened joint, and the contemporary bonded joint; however, the mechanically fastened joint is most commonly used by design engineers. A major portion of the research up-to-date about bolted composite joints has dealt with the inplane static load capacity. This work has helped to spawn standards dealing with filled-hole static joint strength. Other research has clearly shown that the clamp-up load in the mechanical fastener significantly affects the joint strength in a beneficial manner by reducing the bearing strength dependence of the composite laminate. One author reported a maximum increase in joint strength of 28%. This finding has helped to improve the reliability and efficiency of the joint in a composite structure.

Investigation into the Fiber Orientation Effect on the Formability of GLARE Materials in the Stamp Forming Process

NASA Astrophysics Data System (ADS)

Liu, Shichen; Lang, Lihui; Sherkatghanad, Ehsan; Wang, Yao; Xu, Wencai

2018-04-01

Glass-reinforced aluminum laminate (GLARE) is a new class of fiber metal laminates (FMLs) which has the advantages such as high tensile strength, outstanding fatigue, impact resistance, and excellent corrosion properties. GLARE has been extensively applied in advanced aerospace and automobile industries. However, the deformation behavior of the glass fiber during forming must be studied to the benefits of the good-quality part we form. In this research, we focus on the effect of fiber layer orientation on the GLARE laminate formability in stamp forming process. Experimental and numerical analysis of stamping a hemisphere part in different fiber orientation is investigated. The results indicate that unidirectional and multi-directional fiber in the middle layer make a significant effect on the thinning and also surface forming quality of the three layer sheet. Furthermore, the stress-strain distribution of the aluminum alloy and the unique anisotropic property of the fiber layer exhibit that fiber layer orientation can also affect the forming depths as well as the fracture modes of the laminate. According to the obtained results, it is revealed that multi-directional fiber layers are a good alternative compared to the unidirectional fibers especially when a better formability is the purpose.

Plagiarism Detection for Indonesian Language using Winnowing with Parallel Processing

NASA Astrophysics Data System (ADS)

Arifin, Y.; Isa, S. M.; Wulandhari, L. A.; Abdurachman, E.

2018-03-01

The plagiarism has many forms, not only copy paste but include changing passive become active voice, or paraphrasing without appropriate acknowledgment. It happens on all language include Indonesian Language. There are many previous research that related with plagiarism detection in Indonesian Language with different method. But there are still some part that still has opportunity to improve. This research proposed the solution that can improve the plagiarism detection technique that can detect not only copy paste form but more advance than that. The proposed solution is using Winnowing with some addition process in pre-processing stage. With stemming processing in Indonesian Language and generate fingerprint in parallel processing that can saving time processing and produce the plagiarism result on the suspected document.

38 CFR Appendix A to Part 41 - Data Collection Form (Form SF-SAC)

Code of Federal Regulations, 2010 CFR

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Data Collection Form (Form SF-SAC) A Appendix A to Part 41 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS.... Appendix A to Part 41—Data Collection Form (Form SF-SAC) Note: Data Collection Form SF-SAC and instructions...

Non-cigarette tobacco use among women and adverse pregnancy outcomes

PubMed Central

ENGLAND, LUCINDA J.; KIM, SHIN Y.; TOMAR, SCOTT L; RAY, CECILY S; GUPTA, PRAKASH C.; EISSENBERG, THOMAS; CNATTINGIUS, SVEN; BERNERT, JOHN T.; TITA, ALAN THEVENET N.; WINN, DEBORAH M.; DJORDJEVIC, MIRJANA V.; LAMBE, MATS; STAMILIO, DAVID; CHIPATO, TSUNGAI; TOLOSA, JORGE E.

2017-01-01

Although cigarette smoking remains the most prevalent form of tobacco use in girls and in women of reproductive age globally, use of non-cigarette forms of tobacco is prevalent or gaining in popularity in many parts of the world, especially in low- and middle-income countries. Sparse but growing evidence suggests that the use of some non-cigarette tobacco products during pregnancy increases the risk of adverse pregnancy outcomes. In this paper we review the literature on the prevalence of non-cigarette tobacco product use in pregnant women and in women of reproductive age in high-, middle-, and low-income countries and the evidence that maternal use of these products during pregnancy has adverse health effects. In addition, we communicate findings from an international group of perinatal and tobacco experts that was convened to establish research priorities concerning the use of non-cigarette tobacco products during pregnancy. The working group concluded that attempts to develop a public health response to non-cigarette tobacco use in women are hindered by a lack of data on the epidemiology of use in many parts of the world and by our limited understanding of the type and magnitude of the health effects of these products. We highlight research gaps and provide recommendations for a global research agenda. PMID:20225987

Alternative medicine complements standard. Various forms focus on holistic concepts.

PubMed

Seaward, B L

1994-09-01

Western or conventional medical practices are founded on the principle of Newtonian physics; the body is viewed as a large clock whose broken parts are fixed or replaced. The placebo effect, hypnosis, psychoneuroimmunology, and spontaneous remission have recently inspired researchers to look beyond this mechanistic model toward a new paradigm of greater understanding regarding the entity we call "human beings." The premise of alternative medicine, based on the paradigm of whole systems, suggests that human beings are more than physical bodies with fixable and replaceable parts; they are a complicated network of pulsating energy frequencies often described in terms of a human aura. Western researchers now call this "the human energy field." Homeopathy, acupuncture, polarity healing, and the healing power of touch are only a few of the more common branches of holistic medicine that unite body, mind, and spirit for optimal health. The U.S. Congress has appropriated more than $2 million to the National Institutes of Health to research the validity of alternative or complementary medicines. In light of proposed changes in the healthcare system, alternative medicine may eventually be incorporated into the American structure of healthcare delivery. Proponents of holistic medicine agree that various forms of alternative medicine should be used to complement, rather than compete, with, the current accepted standard of healthcare.

Effects of Fault Segmentation, Mechanical Interaction, and Structural Complexity on Earthquake-Generated Deformation

NASA Astrophysics Data System (ADS)

Haddad, David Elias

Earth's topographic surface forms an interface across which the geodynamic and geomorphic engines interact. This interaction is best observed along crustal margins where topography is created by active faulting and sculpted by geomorphic processes. Crustal deformation manifests as earthquakes at centennial to millennial timescales. Given that nearly half of Earth's human population lives along active fault zones, a quantitative understanding of the mechanics of earthquakes and faulting is necessary to build accurate earthquake forecasts. My research relies on the quantitative documentation of the geomorphic expression of large earthquakes and the physical processes that control their spatiotemporal distributions. The first part of my research uses high-resolution topographic lidar data to quantitatively document the geomorphic expression of historic and prehistoric large earthquakes. Lidar data allow for enhanced visualization and reconstruction of structures and stratigraphy exposed by paleoseismic trenches. Lidar surveys of fault scarps formed by the 1992 Landers earthquake document the centimeter-scale erosional landforms developed by repeated winter storm-driven erosion. The second part of my research employs a quasi-static numerical earthquake simulator to explore the effects of fault roughness, friction, and structural complexities on earthquake-generated deformation. My experiments show that fault roughness plays a critical role in determining fault-to-fault rupture jumping probabilities. These results corroborate the accepted 3-5 km rupture jumping distance for smooth faults. However, my simulations show that the rupture jumping threshold distance is highly variable for rough faults due to heterogeneous elastic strain energies. Furthermore, fault roughness controls spatiotemporal variations in slip rates such that rough faults exhibit lower slip rates relative to their smooth counterparts. The central implication of these results lies in guiding the interpretation of paleoseismically derived slip rates that are used to form earthquake forecasts. The final part of my research evaluates a set of Earth science-themed lesson plans that I designed for elementary-level learning-disabled students. My findings show that a combination of concept delivery techniques is most effective for learning-disabled students and should incorporate interactive slide presentations, tactile manipulatives, teacher-assisted concept sketches, and student-led teaching to help learning-disabled students grasp Earth science concepts.

A Study of Flexitime Effects in a Government Research Organization.

DTIC Science & Technology

1980-05-01

report on new individually-worded initiating structure and consideration subscales. College of Administrative Science, The Ohio State University...the relatively new concept called "FLEXITIME." In its simplest form, this consists of two parts. The first part is a "core time," which is a band of...etc.) ’ 1,. 6:0 a m. -Winter p =m. 01pring am. Summer p]m7Responsibilities for children (In school, babysitter , etc.) El2i 6:00 a.m. - 2:30 p.m. i2 6

GRIP Experiment 2010

NASA Image and Video Library

2010-08-15

Susan Kool, a researcher from the Langley Research Center, works on monitoring the Lidar Atmospheric Sensing Experiment (LASE) aboard the NASA DC-8 aircraft, Monday, Aug. 16, 2010, at Fort Lauderdale Hollywood International Airport in Fort Lauderdale, Fla. LASE probes the atmosphere using lasers and is part of the Genesis and Rapid Intensification Processes (GRIP) experiment is a NASA Earth science field experiment in 2010 that is being conducted to better understand how tropical storms form and develop into major hurricanes. Photo Credit: (NASA/Paul E. Alers)

GRIP Experiment 2010

NASA Image and Video Library

2010-08-16

An unidentified researcher looks over the wiring connecting the Airbrorne Precipitation Radar (APR-2) during a flight aboard the NASA DC-8 aircraft, Tuesday, Aug. 17, 2010, over the Gulf of Mexico. Scientists taking part in the Genesis and Rapid Intensification Processes (GRIP) experiment, a NASA Earth science field experiment in 2010 that is being conducted to better understand how tropical storms form and develop into major hurricanes, flew out over a weather pattern Tuesday to begin their research. Photo Credit: (NASA/Paul E. Alers)

Three-dimensional laser window formation

NASA Technical Reports Server (NTRS)

Verhoff, Vincent G.

1992-01-01

The NASA Lewis Research Center has developed and implemented a unique process for forming flawless three-dimensional laser windows. These windows represent a major part of specialized, nonintrusive laser data acquisition systems used in a variety of compressor and turbine research test facilities. This report discusses in detail the aspects of three-dimensional laser window formation. It focuses on the unique methodology and the peculiarities associated with the formation of these windows. Included in this discussion are the design criteria, bonding mediums, and evaluation testing for three-dimensional laser windows.

Compound curvature laser window development

NASA Technical Reports Server (NTRS)

Verhoff, Vincent G.

1993-01-01

The NASA Lewis Research Center has developed and implemented a unique process for forming flawless compound curvature laser windows. These windows represent a major part of specialized, nonintrusive laser data acquisition systems used in a variety of compressor and turbine research test facilities. This report summarizes the main aspects of compound curvature laser window development. It is an overview of the methodology and the peculiarities associated with the formulation of these windows. Included in this discussion is new information regarding procedures for compound curvature laser window development.

Reduction of Manual Handling with Loads and Activities Causing Musculosceletal Disorders in a Selected Workplace

NASA Astrophysics Data System (ADS)

Beňo, Rastislav; Lenhardtová, Zuzana; Zelenay, Tomáš

2016-06-01

The main aim of the article is to present the results from the research project which was focused on the minimisation of ergonomic risk to the musculoskeletal system. The research was conducted in a company whose core business includes the production; converting and sales of packaging materials. The first section of the article is focused on the theoretical basis of software support in ergonomics. In the second section, the authors' deal with analysis of the current situation in the selected workplace (production of printing forms for rotogravure and flexoprinting) by anthropometric measurements and research conducted in the form of a questionnaire survey. The third part is focused on the presentation of the newly created simulation model in the virtual environment of Tecnomatix Jack software. The final section of the article describes the proposed solutions (organisational and technical).

Positive versus negative perfectionism in psychopathology: a comment on Slade and Owens's dual process model.

PubMed

Flett, Gordon L; Hewitt, Paul L

2006-07-01

This article reviews the concepts of positive and negative perfectionism and the dual process model of perfectionism outlined by Slade and Owens (1998). The authors acknowledge that the dual process model represents a conceptual advance in the study of perfectionism and that Slade and Owens should be commended for identifying testable hypotheses and future research directions. However, the authors take issue with the notion that there are two types of perfectionism, with one type of perfectionism representing a "normal" or "healthy" form of perfectionism. They suggest that positive perfectionism is motivated, at least in part, by an avoidance orientation and fear of failure, and recent attempts to define and conceptualize positive perfectionism may have blurred the distinction between perfectionism and conscientiousness. Research findings that question the adaptiveness of positive forms of perfectionism are highlighted, and key issues for future research are identified.

Education at the Dittrick Museum of Medical History, Case Western Reserve University, Cleveland, Ohio, USA.

PubMed

Edmonson, James M

2009-01-01

The Dittrick Museum of Medical History pursues an educational mission as being part of a major research university. While the Dittrick dates to 1899 as a historical committee of the Cleveland Medical Library Association, it first affiliated with Case Western Reserve University in 1966, and became a department of the College of Arts and Sciences of CWRU in 1998. The Dittrick maintains a museum exhibition gallery that is open to the public free of charge, and museum staff provide guided tours on appointment. Much of the teaching and instruction at the Dittrick is conducted by university professors; their classes meet in the museum and use museum resources in the form of artifacts, images, archives, and rare books. Class projects using Dittrick collections may take the form of research papers, exhibitions, and online presentations. Dittrick staff assist in these classes and are available to help researchers use museum resources.

Disseminating Comparative Effectiveness Research Through Community-based Experiential Learning.

PubMed

Hansen, Richard A; Williamson, Margaret; Stevenson, Lynn; Davis, Brandy R; Evans, R Lee

2017-02-25

Objectives. To launch and evaluate a comparative effectiveness research education and dissemination program as part of an introductory pharmacy practice experience (IPPE). Methods. First- through third-year PharmD students received training on comparative effectiveness research and disseminated printed educational materials to patients in the community who they were monitoring longitudinally (n=314). Students completed an assessment and initial visit documentation form at the first visit, and a follow-up assessment and documentation form at a subsequent visit. Results. Twenty-three diabetes patients, 29 acid-reflux patients, 30 osteoarthritis patients, and 50 hypertension patients received materials. Aside from the patient asking questions, which was the most common outcome (n=44), the program resulted in 38 additional actions, which included stopping, starting, or changing treatments or health behaviors, or having additional follow-up or diagnostic testing. Small but positive improvements in patient understanding, confidence, and self-efficacy were observed. Conclusions. Dissemination of comparative effectiveness research materials in an IPPE program demonstrated a positive trend in markers of informed decision-making.

The Faculty Identities of Community College Adjuncts Teaching in the Humanities: A Discourse Analysis Study

ERIC Educational Resources Information Center

Thirolf, Kathryn Q.

2012-01-01

Research has shown that forming a professional identity is central in the process of becoming an effective teacher (Alsup, 2006; Danielewicz, 2001). Yet, little is known about the faculty identity development of part-time faculty, who represent nearly 70% of all faculty at community colleges (AFT Higher Education, 2009). Addressing this critical…

Autistic Spectrum Disorders: Causal Mechanisms and Recent Findings on Attention and Emotion

ERIC Educational Resources Information Center

Bryson, Susan E.; Landry, Reginald; Czapinski, Patrycja; McConnell, Beth; Rombough, Vicki; Wainwright, Ann

2004-01-01

This paper provides an overview of selective research on autism. Autism forms part of a spectrum of related developmental disorders that vary in severity. Both their prevalence and severity argue for concerted efforts aimed at improving our understanding and treatment of the many individuals affected. We begin by outlining an important discovery…

Becoming a Client, Becoming a Practitioner: Student Narratives of a Dance Movement Therapy Group

ERIC Educational Resources Information Center

Payne, Helen

2004-01-01

This paper documents one of several themes arising from a larger research study which invited trainees' views on their experience in a weekly, 2 year, dance movement therapy (DMT) personal development group. This group formed part of their post-graduate training. The study used a phenomenological, grounded theory and collaborative methodology…

Intensive Evaluation of Head Start Implementation in the Tucson Early Education Model.

ERIC Educational Resources Information Center

Rentfrow, Robert K.

As part of the national Head Start Planned Variation Study, this study used a relatively small sample in an intensive evaluation of program implementation in one field community using the Tucson Early Education Model (TEEM). A modified Solomon four-group research design formed the organization framework. Evaluation of six TEEM classrooms and two…

Children's Perceptions of National Identity in Wales

ERIC Educational Resources Information Center

Murphy, Alison; Laugharne, Janet

2013-01-01

The project forms part of a larger doctoral study which examines children's perceptions of national identity and its construction and importance in the world of the child in Wales. The research took place in a primary school class in the South Wales valleys, in a class of 27 children aged 7-8 years. Following an introductory activity, children…

Development of a Secondary School Physics Program: Harvard Project Physics. Volume 2, More Appendices. Final Report.

ERIC Educational Resources Information Center

Holton, Gerald; And Others

As appendices to the final report on Project Physics (SE 015 500), this volume includes parts of the original documents concerning the project development. Articles published in the "Physics Teacher" are included in reprint form. Evaluation and research papers along with related materials issued in other publications are grouped into…

Writing for Learning in Science: A Secondary Analysis of Six Studies

ERIC Educational Resources Information Center

Gunel, Murat; Hand, Brian; Prain, Vaughan

2007-01-01

This study is a secondary analysis of six previous studies that formed part of an ongoing research program focused on examining the benefits of using writing-to-learn strategies within science classrooms. The study is an attempt to make broader generalizations than those based on individual studies, given limitations related to sample sizes,…

An Evaluation of Gender Differences in Computer-Based Case Simulations.

ERIC Educational Resources Information Center

Scheuneman, Janice Dowd; And Others

As part of the research leading to the implementation of computer-based case simulations (CCS) for the licensing examinations of the National Board of Medical Examiners, gender differences in performance were studied for one form consisting of 18 cases. A secondary purpose of the study was to note differences in style or approach that might…

Southeastern Wyoming's Country Schools. Country School Legacy: Humanities on the Frontier.

ERIC Educational Resources Information Center

Riske, Milton

Information from 22 oral history interviews, periodicals, unpublished manuscripts, and school records provides an indication of the role played by country schools in the history of southeastern Wyoming and forms part of an 8-state research effort to locate and preserve information related to country schools. The report focuses on six aspects of…

The Fluid Reading Primer: Animated Decoding Support for Emergent Readers.

ERIC Educational Resources Information Center

Zellweger, Polle T.; Mackinlay, Jock D.

A prototype application called the Fluid Reading Primer was developed to help emergent readers with the process of decoding written words into their spoken forms. The Fluid Reading Primer is part of a larger research project called Fluid Documents, which is exploring the use of interactive animation of typography to show additional information in…

Personal Experiences and Beliefs in Early Probabilistic Reasoning: Implications for Research

ERIC Educational Resources Information Center

Sharma, Sashi

2005-01-01

Data reported in this paper is part of a larger study which explored form five (14 to 16 year olds) students' ideas in probability and statistics. This paper presents and discusses the ways in which students made sense of task involving independence construct obtained from the individual interviews. The findings revealed that many of the students…

Voices of Pedagogical Development--Expanding, Enhancing and Exploring Higher Education Language Learning

ERIC Educational Resources Information Center

Jalkanen, Juha, Ed.; Jokinen, Elina, Ed.; Taalas, Peppi, Ed.

2015-01-01

"Voices of Pedagogical Development" is a collection of articles written by teacher-researchers at the University of Jyväskylä Language Centre. It shares the fruits of their ideas and development work in the areas of academic literacies, new forms of teaching and learning, and internationalisation. Part one aims at establishing and…

The Open Learning Object Model to Promote Open Educational Resources

ERIC Educational Resources Information Center

Fulantelli, Giovanni; Gentile, Manuel; Taibi, Davide; Allegra, Mario

2008-01-01

In this paper we present the results of research work, that forms part of the activities of the EU-funded project SLOOP: Sharing Learning Objects in an Open Perspective, aimed at encouraging the definition, development and management of Open Educational Resources based on the Learning Object paradigm (Wiley, 2000). We present a model of Open…

Variations in Form and Skill: Supporting Multiple Orientations to Reflective Thinking in Leadership Preparation

ERIC Educational Resources Information Center

Carver, Cynthia L; Klein, C. Suzanne

2016-01-01

Drawing on data collected as part of a qualitative action research study, our analysis examines the reflective thinking skill of candidates as they begin a two-year principal preparation program. As leadership educators, we noticed that our highest performing students were also the most skilled at thinking reflectively. Using candidates' writing…

Focus on Form and Corrective Feedback Research at the University of Victoria, Canada

ERIC Educational Resources Information Center

Chen, Sibo; Nassaji, Hossein

2018-01-01

The Department of Linguistics at University of Victoria (UVic) in Canada has a long-standing tradition of empirical approaches to the study of theoretical and applied linguistics. As part of the Faculty of Humanities, the department caters to students with a wide range of backgrounds and interests, and provides crucial language teaching support in…

Virtual Communities as a Social and Cultural Phenomenon

ERIC Educational Resources Information Center

Atici, Bünyamin

2016-01-01

The developments which were experienced in the communication and technology area made internet an important part of the daily life. In this respect, the virtual communities are in prominent place which are insulated from the time and place. In the study, Hakkarim.net is researched that formed our subject as one of the most different examples of…

Teachers' Beliefs in English Language Teaching and Learning: A Review of the Literature

ERIC Educational Resources Information Center

Gilakjani, Abbas Pourhosein; Sabouri, Narjes Banou

2017-01-01

Beliefs form part of the process of understanding how teachers shape their work which is significant to the comprehending of their teaching methods and their decisions in the classroom. Teachers' beliefs have been an interesting topic for researchers due to the input they provide for the improvement of English language teaching and learning.…

Participation in Informal Science Learning Experiences: The Rich Get Richer?

ERIC Educational Resources Information Center

DeWitt, Jennifer; Archer, Louise

2017-01-01

Informal science learning (ISL) experiences have been found to provide valuable opportunities to engage with and learn about science and, as such, form a key part of the STEM learning ecosystem. However, concerns remain around issues of equity and access. The Enterprising Science study builds upon previous research in this area and uses the…

Regulation of Standardized Testing in Kentucky. Research Report No. 209.

ERIC Educational Resources Information Center

Kentucky State General Assembly, Frankfort. Legislative Research Commission.

The Subcommittee on Truth in Testing of the Interim Joint Committee on Education was formed in response to Senate Resolution 43 of the 1982 Kentucky General Assembly. Its task was to study the questions regarding the effectiveness and equity of standardized testing, which has become an important part of the academic experience of public school…

Representations of Numerical and Non-Numerical Magnitude Both Contribute to Mathematical Competence in Children

ERIC Educational Resources Information Center

Lourenco, Stella F.; Bonny, Justin W.

2017-01-01

A growing body of evidence suggests that non-symbolic representations of number, which humans share with nonhuman animals, are functionally related to uniquely human mathematical thought. Other research suggesting that numerical and non-numerical magnitudes not only share analog format but also form part of a general magnitude system raises…

Differences between Perceived Usefulness of Social Media and Institutional Channels by Undergraduate Students

ERIC Educational Resources Information Center

Sumida Garcia, Leandro; Costa Silva, Camila Mariane

2017-01-01

Purpose: This research aims to compare the preference of social media sites and institutional communication channels of a higher education institution by confronting elements that form perceived usefulness and user satisfaction with the system. Social media technologies are a part of the routine of the modern society in many diverse ways,…

"Baro Afkaaga Hooyo!" A Case Study of Somali Literacy Teaching in Liverpool.

ERIC Educational Resources Information Center

Arthur, Jo

2003-01-01

Reports on an ethnographic research project in Liverpool, England. Aimed to build an understanding of the communicative and symbolic roles of languages and literacies in the Liverpool Somali community, which forms part of the Somali diaspora within Britain. The role of literacy is of particular interest in the context of a vigorous oral tradition…

School Policies on Bullying and Cyberbullying: Perspectives across Three Australian States

ERIC Educational Resources Information Center

Chalmers, Caitlin; Campbell, Marilyn Anne; Spears, Barbara A; Butler, Des; Cross, Donna; Slee, Phillip; Kift, Sally

2016-01-01

Background: Despite decades of research, bullying in all its forms is still a significant problem within schools in Australia, as it is internationally. Anti-bullying policies and guidelines are thought to be one strategy as part of a whole school approach to reduce bullying. However, although Australian schools are required to have these…

33 CFR Appendix A to Part 325 - Permit Form and Special Conditions

Code of Federal Regulations, 2010 CFR

2010-07-01

...). () Section 404 of the Clean Water Act (33 U.S.C. 1344). () Section 103 of the Marine Protection, Research and... unpermitted activities or structures caused by the activity authorized by this permit. d. Design or... Ocean Service, Office of Coast Survey, N/CS261, 1315 East West Highway, Silver Spring, Maryland 20910...

33 CFR Appendix A to Part 325 - Permit Form and Special Conditions

Code of Federal Regulations, 2011 CFR

2011-07-01

...). () Section 404 of the Clean Water Act (33 U.S.C. 1344). () Section 103 of the Marine Protection, Research and... unpermitted activities or structures caused by the activity authorized by this permit. d. Design or... Ocean Service, Office of Coast Survey, N/CS261, 1315 East West Highway, Silver Spring, Maryland 20910...

33 CFR Appendix A to Part 325 - Permit Form and Special Conditions

Code of Federal Regulations, 2013 CFR

2013-07-01

...). () Section 404 of the Clean Water Act (33 U.S.C. 1344). () Section 103 of the Marine Protection, Research and... unpermitted activities or structures caused by the activity authorized by this permit. d. Design or... Ocean Service, Office of Coast Survey, N/CS261, 1315 East West Highway, Silver Spring, Maryland 20910...

33 CFR Appendix A to Part 325 - Permit Form and Special Conditions

Code of Federal Regulations, 2012 CFR

2012-07-01

...). () Section 404 of the Clean Water Act (33 U.S.C. 1344). () Section 103 of the Marine Protection, Research and... unpermitted activities or structures caused by the activity authorized by this permit. d. Design or... Ocean Service, Office of Coast Survey, N/CS261, 1315 East West Highway, Silver Spring, Maryland 20910...

Bending Back To Move Forward: Using Reflective Practice To Develop a High School Civic Education/Aikido Course.

ERIC Educational Resources Information Center

Miller-Lane, Jonathan

This paper describes the development of a high school social studies course, Citizenship and World Affairs. Course development involved two forms of reflection: deliberative and personalistic. The author's deliberative reflection, reported in part one of the paper, began as he reviewed research regarding how teachers should foster citizenship…

Engineering Infrastructure Diagramming and Modeling. Engineering Education and Practice in The United States.

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC. Commission on Engineering and Technical Systems.

This report forms an integral part of a study conducted by the Committee on the Education and Utilization of the Engineer, under the auspices of the National Research Council. Five major tasks undertaken by the panel were: (1) defining engineering; (2) determining influences on the engineering community, including external influences and internal…

An Ethnodrama on Work-Related Learning in Precarious Jobs: Racialization and Resistance

ERIC Educational Resources Information Center

Sangha, Jasjit K.; Slade, Bonnie; Mirchandani, Kiran; Maitra, Srabani; Shan, Hongxia

2012-01-01

This article is based on a research project on the lived experiences of precarious workers in Toronto, Canada. Using interviews with women in part-time, contract, and temporary jobs in three sectors (telemarketing, retail, and garment), the project explores the ways in which racial hierarchies structure jobs as well as forms of resistance that…

Survey of Adult Students with Mathematical Difficulties

ERIC Educational Resources Information Center

Jarlskog, Linda

2016-01-01

This paper relates to one of the test procedures being used in Sweden, used to establish if students need a more thorough investigation of their mathematical difficulties. This paper mainly describes the test process and the results from 10 test subjects. The paper also refers to parts of the research forming the basis for the test process. The…

A Review of Research Instruments Assessing Levels of Student Acceptance of Evolution

ERIC Educational Resources Information Center

Yasri, Pratchayapong

2014-01-01

Darwin's theory of evolution by means of natural selection, called evolution for short, is perceived as a unifying theme in biology, forming a major part of all biology syllabuses. It is reported that student acceptance of evolution associates with conceptual understandings of biological contents, nature of science, as well as motivations to…

Exploring the Experiences of People with Intellectual Disabilities when Service Users Die

ERIC Educational Resources Information Center

Ryan, Karen; Guerin, Suzanne; Dodd, Philip; McEvoy, John

2011-01-01

Research is lacking on the effect of the deaths of fellow service users on people with intellectual disabilities. This qualitative study formed part of a project which aimed to describe the provision of palliative care to people with intellectual disabilities in Ireland and to assess the population's palliative care needs. We report on findings…

"Israel Is Meant for Me": Kindergarteners' Conceptions of Israel

ERIC Educational Resources Information Center

Zakai, Sivan

2015-01-01

What is Israel in the minds and hearts of young American Jewish children? Through interviews and photo and music elicitation exercises, this research uncovers how day school kindergarten students conceive of Israel. This study, part of an ongoing longitudinal project, shows how 5- and 6-year-old children are able to form a multilayered conception…

How the physical forms of starch affect filterability at a carbonatation refinery. Part I: Filterability of industrial sugars

USDA-ARS?s Scientific Manuscript database

A study using the USDA starch research method was conducted to evaluate the effects of total, insoluble, and soluble starch on raw sugar filterability and viscosity. Sugar quality parameters, i.e., pol, colour, invert, ash, and dextran, were measured in fifty-five international raw sugars supplied b...

Financial Aid Policy: Lessons from Research

ERIC Educational Resources Information Center

Dynarski, Susan; Scott-Clayton, Judith

2013-01-01

In the nearly fifty years since the adoption of the Higher Education Act of 1965, financial aid programs have grown in scale, expanded in scope, and multiplied in form. As a result, financial aid has become the norm among college enrollees. Aid now flows not only to traditional college students but also to part-time students, older students, and…

Making meaning in qualitative research with conversational partnerships: a methodological discussion.

PubMed

Hunter Revell, Susan M

2013-01-01

Rubin and Rubin's responsive interviewing method is based on the conversational partnership formed between researcher and participant. This method allows the researcher to understand experiences through the participant's words and stories to create meaning. In this article, the reader is guided through a 3-part interview series with a person living with traumatic spinal cord injury. The example focuses on how interview guides were developed and tailored to the participant, and how field notations were created. Findings include the importance of establishing trust and rapport in conversational partnerships for meaning making to occur.

Patchwork Chemical Garden

NASA Image and Video Library

2015-08-05

A laboratory-created "chemical garden" made of a combination of black iron sulfide and orange iron hydroxide/oxide is shown in this photo. Chemical gardens are a nickname for chimney-like structures that form at bubbling vents on the seafloor. Some researchers think that life may have originated at structures like these billions of years ago. JPL's research team is part of the Icy Worlds team of the NASA Astrobiology Institute, based at NASA's Ames Research Center in Moffett Field, California. JPL is managed by the California Institute of Technology in Pasadena for NASA. http://photojournal.jpl.nasa.gov/catalog/PIA19835

Research of energy characteristics of frequency-regulated electric drive

NASA Astrophysics Data System (ADS)

Arsentiev, O. V.; Arsentiev, G. O.; Dunaev, M. P.

2018-03-01

The paper considers the urgency of the research problems of the inverter as a part of the frequency converter. Experimental studies on the influence of the nature of the load on the structure of the distribution of power consumption are used. The authors described virtual models, allowing for analysis of changes in the cardinality of the inverter-factor when using it on an active-inductive load. According to the results, there are research conclusions to determine the relationship between the current form in the DC- link constant voltage and the mode of operation of the induction motor.

Primary care research--a blueprint for action for Singapore.

PubMed

Chuan, T N; Gan, G L

2001-01-01

Primary care research, hitherto overshadowed by research in the tertiary institutions, lacks impetus due to image, limitations of resources and poor infrastructure. This article looks into the current state of research development and the barriers. These hurdles can be overcome by a paradigm shift through the initiation of regular research meetings, training, infrastructure support and a collaborative research network to optimize time and resources. This will open the door to a wide field of primary care research, from basic, clinical research to health service and health system analysis and evaluation. Family physicians can tap on this opportunity to sharpen their critical appraisal skills through research, which can form an integral part of their continuous professional development. A network of pro-research family physicians will foster a vibrant research culture and pave the way to a renaissance of primary care research.

Dynamics of Isolated Tip Vortex Cavitation

NASA Astrophysics Data System (ADS)

Pennings, Pepijn; Bosschers, Johan; van Terwisga, Tom

2014-11-01

Performance of ship propellers and comfort levels in the surroundings are limited by various forms of cavitation. Amongst these forms tip vortex cavitation is one of the first appearing forms and is expected to be mainly responsible for the emission of broadband pressure fluctuations typically occurring between the 4th to the 7th blade passing frequency (approx. 40--70 Hz). These radiated pressure pulses are likely to excite parts of the hull structure resulting in a design compromise between efficiency and comfort. Insight is needed in the mechanism of acoustic emission from the oscillations by a tip vortex cavity. In the current experimental study the tip vortex cavity from a blade with an elliptic planform and sections based on NACA 662 - 415 with meanline a = 0 . 8 is observed using high speed shadowgraphy in combination with blade force and acoustic measurements. An analytic model describing three main cavity deformation modes is verified and used to explain the origin of a cavity eigenfrequency or ``vortex singing'' phenomenon observed by Maines and Arndt (1997) on the tip vortex cavity originating from the same blade. As no hydrodynamic sound originating from the tip vortex cavity was observed it is posed that a tip flow instability is essential for ``vortex singing.'' This research was funded by the Lloyd's Register Foundation as part of the International Institute for Cavitation Research.

Pacific Fleet Regional Inventory Stocking Model (PRISM)

DTIC Science & Technology

2003-06-01

Fleet Inventory Management Form ..........................................................................99 19. Master Parts List Input Form...100 20. Master Parts List Update Form...107 26. Master Parts List by APL Report..............................................................................109 27. Master

Mixture modeling methods for the assessment of normal and abnormal personality, part II: longitudinal models.

PubMed

Wright, Aidan G C; Hallquist, Michael N

2014-01-01

Studying personality and its pathology as it changes, develops, or remains stable over time offers exciting insight into the nature of individual differences. Researchers interested in examining personal characteristics over time have a number of time-honored analytic approaches at their disposal. In recent years there have also been considerable advances in person-oriented analytic approaches, particularly longitudinal mixture models. In this methodological primer we focus on mixture modeling approaches to the study of normative and individual change in the form of growth mixture models and ipsative change in the form of latent transition analysis. We describe the conceptual underpinnings of each of these models, outline approaches for their implementation, and provide accessible examples for researchers studying personality and its assessment.

Retinitis pigmentosa in Spain. The Spanish Multicentric and Multidisciplinary Group for Research into Retinitis Pigmentosa.

PubMed

Ayuso, C; Garcia-Sandoval, B; Najera, C; Valverde, D; Carballo, M; Antiñolo, G

1995-09-01

Retinitis pigmentosa is a term commonly given to a group of inherited and progressive disorders which affect the photoreceptors of the retina. As part of an ongoing research programme throughout Spain, clinical, epidemiological, and genetic studies have been carried out on these diseases. Here, we report the relative frequencies of the different genetic types in 503 non-syndromic and 89 syndromic RP families of Spanish origin. The most frequent syndromic RP forms were Usher syndrome type 1 (20/89 families = 30%) and Usher syndrome type 2 (44 families = 49%). Among non-syndromic RP forms, 12% were autosomal dominant, 39% autosomal recessive and 4% X-linked. Forty-one percent were isolated or simplex cases and in 4% the genetic type could not be established.

Pore-forming toxins in Cnidaria.

PubMed

Podobnik, Marjetka; Anderluh, Gregor

2017-12-01

The ancient phylum of Cnidaria contains many aquatic species with peculiar lifestyle. In order to survive, these organisms have evolved attack and defense mechanisms that are enabled by specialized cells and highly developed venoms. Pore-forming toxins are an important part of their venomous arsenal. Along some other types, the most representative are examples of four protein families that are commonly found in other kingdoms of life: actinoporins, Cry-like proteins, aerolysin-like toxins and MACPF/CDC toxins. Some of the homologues of pore-forming toxins may serve other functions, such as in food digestion, development and response against pathogenic organisms. Due to their interesting physico-chemical properties, the cnidarian pore-forming toxins may also serve as tools in medical research and nanobiotechnological applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

46 CFR Form Fmc-132a to Subpart A... - Form FMC-132A to Subpart A of Part 540

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 9 2013-10-01 2013-10-01 false Form FMC-132A to Subpart A of Part 540 FMC Form FMC-132A... Pt. 540, Subpt. A, Form FMC-132A Form FMC-132A to Subpart A of Part 540 FORM FMC-132A FEDERAL... furnish written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered...

46 CFR Form Fmc-132a to Subpart A... - Form FMC-132A to Subpart A of Part 540

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 9 2012-10-01 2012-10-01 false Form FMC-132A to Subpart A of Part 540 FMC Form FMC-132A... Pt. 540, Subpt. A, Form FMC-132A Form FMC-132A to Subpart A of Part 540 Form FMC-132A FEDERAL... furnish written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered...

46 CFR Form Fmc-132a to Subpart A... - Form FMC-132A to Subpart A of Part 540

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 9 2014-10-01 2014-10-01 false Form FMC-132A to Subpart A of Part 540 FMC Form FMC-132A... Pt. 540, Subpt. A, Form FMC-132A Form FMC-132A to Subpart A of Part 540 FORM FMC-132A FEDERAL... furnish written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered...

46 CFR Form Fmc-132a to Subpart A... - Form FMC-132A to Subpart A of Part 540

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 9 2011-10-01 2011-10-01 false Form FMC-132A to Subpart A of Part 540 FMC Form FMC-132A... Pt. 540, Subpt. A, Form FMC-132A Form FMC-132A to Subpart A of Part 540 Form FMC-132A FEDERAL... furnish written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered...

12 CFR Appendix C to Part 202 - Sample Notification Forms

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 2 2011-01-01 2011-01-01 false Sample Notification Forms C Appendix C to Part... CREDIT OPPORTUNITY ACT (REGULATION B) Pt. 202, App. C Appendix C to Part 202—Sample Notification Forms 1. This appendix contains ten sample notification forms. Forms C-1 through C-4 are intended for use in...

12 CFR Appendix C to Part 202 - Sample Notification Forms

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 2 2014-01-01 2014-01-01 false Sample Notification Forms C Appendix C to Part... CREDIT OPPORTUNITY ACT (REGULATION B) Pt. 202, App. C Appendix C to Part 202—Sample Notification Forms 1. This appendix contains ten sample notification forms. Forms C-1 through C-4 are intended for use in...

7 CFR 1710.2 - Definitions and rules of construction.

Code of Federal Regulations, 2014 CFR

2014-01-01

...=Distribution (plant), which equals Part E, Line 14(e) of RUS Form 7; B=General Plant, which equals Part E, Line 24(e) of RUS Form 7; C=Operating Revenue and Patronage Capital, which equals Part A, Line 1 of RUS Form 7; and D=Cost of Power, which equals the sum of Part A, Lines 2, 3, and 4 of RUS Form 7. Area...

16 CFR Appendix C to Part 698 - Model Forms for Affiliate Marketing Opt-Out Notices

Code of Federal Regulations, 2012 CFR

2012-01-01

... Notices C Appendix C to Part 698 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT MODEL FORMS AND DISCLOSURES Pt. 698, App. C Appendix C to Part 698—Model Forms for Affiliate... of opt-outs by joint consumers to comply with § 680.23(a)(2) of part 680. C-1 Model Form for Initial...

16 CFR Appendix C to Part 698 - Model Forms for Affiliate Marketing Opt-Out Notices

Code of Federal Regulations, 2014 CFR

2014-01-01

... Notices C Appendix C to Part 698 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT MODEL FORMS AND DISCLOSURES Pt. 698, App. C Appendix C to Part 698—Model Forms for Affiliate... of opt-outs by joint consumers to comply with § 680.23(a)(2) of part 680. C-1 Model Form for Initial...

16 CFR Appendix C to Part 698 - Model Forms for Affiliate Marketing Opt-Out Notices

Code of Federal Regulations, 2013 CFR

2013-01-01

... Notices C Appendix C to Part 698 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT MODEL FORMS AND DISCLOSURES Pt. 698, App. C Appendix C to Part 698—Model Forms for Affiliate... of opt-outs by joint consumers to comply with § 680.23(a)(2) of part 680. C-1 Model Form for Initial...

Researching the experience of kidney cancer patients.

PubMed

Taylor, K

2002-09-01

The author's personal experience as a kidney cancer patient, researcher and founder of a kidney cancer support group forms the basis for consideration of the challenges involved in researching patients' experiences. The researcher needs to understand the variability of those experiences in both clinical and psychological-emotional terms, and in relation to the personal, familial and social contexts of the patient. It is also essential to define the purpose of the research and to show how an understanding of personal experiences of cancer can be used to enhance the quality of care for cancer patients. The research encounter with a patient is also in some respects a therapeutic encounter requiring a considerable degree of sensitivity on the part of the researcher. The person-centred approach of Carl Rogers is of value in supporting such an encounter.

GUMNET - A new long-term monitoring initiative in the Guadarrama Mountains, Madrid, Spain

NASA Astrophysics Data System (ADS)

Rath, Volker; Fidel González Rouco, J.; Yagüe Anguis, Carlos

2014-05-01

We are announcing a new monitoring network in the Guadarrama Mountains north of Madrid, which is planned to be operational in early 2015. This network integrates atmospheric measurements as well as subsurface observations. It aims at improving the characterization of atmosphere-ground interactions in mountainous terrain, the hydrometeorology of the region, climatic change, and related research lines. It will also provide the meteorological and climate data which form the necessary background information for biological, agricultural and hydrological investigations in this area. Currently, the initiative is supported by research groups from the Complutense and Polytechnical Universities of Madrid (UCM and UPM), the Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (CIEMAT), the Spanish National Meteorological Agency (AEMET), and finally the Parque Nacional de la Sierra de Guadarrama (PNSG). This infrastructure forms part of the Campus of Excellence Moncloa, and is supposed to become a focus of local as well as of international research. However, it is not associated with a particular project: data will in principle be available to the scientific and public communities. Also, the integration of new instruments (long or short term) will be welcome. The starting setup is as following: A group of WMO-compatible meteorological station in the central area of the massif will be installed, which include also a subsurface component of boreholes (≡20 m depth), where temperature and moisture will be measured. This core group is complemented by a reference site near El Escorial (including a fixed and a mobile tower for micrometeorological investigations). This setup is embedded in a network of meteorological stations run partly by AEMET and partly by the PNSG, which will provide the information necessary for the characterization of regional meteorology and climate. Finally, part of the data will be made available quasi-online on a central web server in Madrid. (temporary web page: http://tifon.fis.ucm.es/~gumnet/)

46 CFR Form Fmc-132b to Subpart B... - Form FMC-132B to Subpart B of Part 540

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 9 2012-10-01 2012-10-01 false Form FMC-132B to Subpart B of Part 540 FMC Form FMC-132B... Persons on Voyages Pt. 540, Subpt. B, Form FMC-132B Form FMC-132B to Subpart B of Part 540 Form FMC-132B... written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered, and...

46 CFR Form Fmc-132b to Subpart B... - Form FMC-132B to Subpart B of Part 540

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 9 2013-10-01 2013-10-01 false Form FMC-132B to Subpart B of Part 540 FMC Form FMC-132B... Persons on Voyages Pt. 540, Subpt. B, Form FMC-132B Form FMC-132B to Subpart B of Part 540 Form FMC-132B... written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered, and...

46 CFR Form Fmc-132b to Subpart B... - Form FMC-132B to Subpart B of Part 540

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 9 2011-10-01 2011-10-01 false Form FMC-132B to Subpart B of Part 540 FMC Form FMC-132B... Persons on Voyages Pt. 540, Subpt. B, Form FMC-132B Form FMC-132B to Subpart B of Part 540 Form FMC-132B... written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered, and...

46 CFR Form Fmc-132b to Subpart B... - Form FMC-132B to Subpart B of Part 540

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 9 2010-10-01 2010-10-01 false Form FMC-132B to Subpart B of Part 540 FMC Form FMC-132B... Persons on Voyages Pt. 540, Subpt. B, Form FMC-132B Form FMC-132B to Subpart B of Part 540 Form FMC-132B... written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered, and...

46 CFR Form Fmc-132b to Subpart B... - Form FMC-132B to Subpart B of Part 540

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 9 2014-10-01 2014-10-01 false Form FMC-132B to Subpart B of Part 540 FMC Form FMC-132B... Persons on Voyages Pt. 540, Subpt. B, Form FMC-132B Form FMC-132B to Subpart B of Part 540 Form FMC-132B... written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered, and...

Spanking and Child Development: We Know Enough Now To Stop Hitting Our Children.

PubMed

Gershoff, Elizabeth T

2013-09-01

Spanking remains a common, if controversial, childrearing practice in the United States. In this article, I pair mounting research indicating that spanking is both ineffective and harmful with professional and human rights opinions disavowing the practice. I conclude that spanking is a form of violence against children that should no longer be a part of American childrearing.

Monitors Enable Medication Management in Patients' Homes

NASA Technical Reports Server (NTRS)

2014-01-01

Glenn Research Center awarded SBIR funding to ZIN Technologies to develop a platform that could incorporate sensors quantifying an astronaut’s health status and then communicate with the ground. ZIN created a device, developed the system further, and then formed Cleveland-based FlexLife Health to commercialize the technology. Today it is part of an anti-coagulation management system for people with cardiovascular disease.

Assessing Bullying: A Guide for Out-of-School Time Program Practitioners. Research-to-Results Brief. Publication #2009-42

ERIC Educational Resources Information Center

Sidorowicz, Kathleen; Hair, Elizabeth C.; Milot, Alyssa

2009-01-01

Conflict among peers is common, and not necessarily a bad thing. Disagreement, teasing, and conflict are part of growing up, and children and adolescents need to develop skills to resolve these clashes. However, bullying, an extreme form of peer conflict or teasing, can be physically and psychologically harmful. Therefore, it is important for…

Education, Technology and Connectedness. Global Societal Trends to 2030: Thematic Report 2

ERIC Educational Resources Information Center

Horvath, Veronika; Ghez, Jeremy; Khodyakov, Dmitry; Yaqub, Ohid

2015-01-01

This Research Report forms part of our series on global societal trends and their impact on the EU in 2030. This analysis is embedded within the framework of the European Strategy and Policy Analysis System (ESPAS) set up to develop a lasting framework to assess global trends and to develop policy responses across EU institutions over the next…

Effect of a transpiration retardant on survival of planted ponderosa pine.

Treesearch

Edwin L. Mowat

1961-01-01

Losses of newly planted coniferous seedlings from drought during the critical period when new roots are developing is a continuing problem in many parts of the West. One possible solution frequently suggested to forest managers is to coat the seedling tops with a transpiration inhibitor, usually a waxy substance applied in emulsion form. This research note gives the...

Testing Audiovisual Comprehension Tasks with Questions Embedded in Videos as Subtitles: A Pilot Multimethod Study

ERIC Educational Resources Information Center

Núñez, Juan Carlos Casañ

2017-01-01

Listening, watching, reading and writing simultaneously in a foreign language is very complex. This paper is part of wider research which explores the use of audiovisual comprehension questions imprinted in the video image in the form of subtitles and synchronized with the relevant fragments for the purpose of language learning and testing.…

Drama and Citizenship--Devised Drama for Education

ERIC Educational Resources Information Center

Heikkinen, Hannu M.

2016-01-01

Purpose: In this article I will give an example of a linguistic program I have been doing with sixth form college students from Finland and the Netherland and link this action research to the meaning of drama education, and of the potential of devised drama as a part of civic Education. Method: I will explain the theory of devised drama, then I…

Learning to Reason from Samples: Commentary from the Perspectives of Task Design and the Emergence of "Big Data"

ERIC Educational Resources Information Center

Ainley, Janet; Gould, Robert; Pratt, Dave

2015-01-01

This paper is in the form of a reflective discussion of the collection of papers in this Special Issue on "Statistical reasoning: learning to reason from samples" drawing on deliberations arising at the Seventh International Collaboration for Research on Statistical Reasoning, Thinking, and Literacy (SRTL7). It is an important part of…

Carbon Materials Research

DTIC Science & Technology

2006-08-01

carbon would be highly oriented pyrolytic graphite ( HOPG ), which is formed by depositing one atom at a time on a surface utilizing the pyrolysis of a... of the crystallites, and baking to 2800 K produces a polycrystalline graphite part that has high strength and conductivity. To make isotropic...pitch fibers) or flexible (Graphoil®), as well as anisotropic ( HOPG ) or isotropic ( polycrystalline graphite ). In addition, porosity, lubricity

Addressing the Uncertain Future of Preserving the Past: Towards a Robust Strategy for Digital Archiving and Preservation. Technical Report

ERIC Educational Resources Information Center

Hoorens, Stijn; Rothenberg, Jeff; van Orange, Constantijn; van der Mandele, Martijn; Levitt, Ruth

2007-01-01

Storing and curating authentic academic literature and making it accessible for the long term has been a time-honoured task of national libraries. By guarding existing knowledge and facilitating its use to produce new insights, national and university libraries have formed an integral part of the research environment, complementing the roles of…

Passion Trumps Pay: A Study of the Future Skills Requirements of Information Professionals in Galleries, Libraries, Archives and Museums in Australia

ERIC Educational Resources Information Center

Howard, Katherine; Partridge, Helen; Hughes, Hilary; Oliver, Gillian

2016-01-01

Introduction: This paper explores the current and future skills and knowledge requirements of contemporary information professionals in a converged gallery, library, archive and museum sector (also referred to as the GLAM sector) in Australia. This research forms part of a larger study that investigated the education needs of information…

Research and Activism about Girls' Education for Global Democracy: The Case of the Campaign "Etna, Volcano of Peace," Catania, Italy

ERIC Educational Resources Information Center

Cristaldi, Melita; Pampanini, Giovanni

2016-01-01

According to a progressive interpretation of human development, girls' education should form an integral part of a full democratic system. Nevertheless, girls' education is threatened and attacked in many ways in current societies, be they authoritarian or democratic societies, developing or developed ones. In this article the two authors, both…

The Role of Musical Possible Selves in Supporting Subjective Well-Being in Later Life

ERIC Educational Resources Information Center

Creech, Andrea; Hallam, Susan; Varvarigou, Maria; Gaunt, Helena; McQueen, Hilary; Pincas, Anita

2014-01-01

There is now an accepted need for initiatives that support older people's well-being. There is increasing evidence that active engagement with music has the potential to contribute to this. This paper explores the relationship between musical possible selves and subjective well-being in later life. The research reported here formed part of a…

Written Artefacts in Post-Conference Feedback Sessions: The Running Commentary as a Support for Teacher Learning

ERIC Educational Resources Information Center

Engin, Marion

2015-01-01

Written artefacts often form a significant part of teacher education activities and play a crucial role in the dialogue between tutor and student teacher in a post-observation feedback session. However, although the dialogue of feedback sessions has been extensively researched, the role of the artefact has been less explored. This research…

Individual Empowerment. Global Societal Trends to 2030: Thematic Report 3

ERIC Educational Resources Information Center

Graf, Marlon; Ghez, Jeremy; Khodyakov, Dmitry; Yaqub, Ohid

2015-01-01

This Research Report forms part of our series on global societal trends and their impact on the EU in 2030. This analysis is embedded within the framework of the European Strategy and Policy Analysis System (ESPAS) set up to develop a lasting framework to assess global trends and to develop policy responses across EU institutions over the next…

Resourcing Early Learners: New Networks, New Actors. Routledge Research in Education

ERIC Educational Resources Information Center

Nichols, Sue; Rowsell, Jennifer; Nixon, Helen; Rainbird, Sophia

2012-01-01

The landscape of early childhood education and care is changing. Governments world-wide are assuming increasing authority in relation to child-rearing in the years before school entry, beyond the traditional role in assisting parents to do the best they can by their children. As part of a social agenda aimed at forming citizens well prepared to…

Neurophysiological Indices of the Effect of Cognates on Vowel Perception in Late Spanish-English Bilinguals

ERIC Educational Resources Information Center

Tessel, Carol A.

2013-01-01

The field of research in bilingualism and second language (L2) acquisition has yielded overwhelming evidence that acquiring a second language later in life will result in less accurate production and perception of consonants and vowels in the second language. These effects, in part, are a result of interference from the already formed phonetic…

Revoicing: A Tool to Engage All Learners in Academic Conversations

ERIC Educational Resources Information Center

Ferris, Sarah J.

2014-01-01

Talk provides a foundation for how we learn language and advance as literate individuals. Talking helps us form thoughts, engages us in deeper learning with others, and plays a key part in how we learn to read and write. In this article, Accountable Talk®, which comes from researchers through the Institute for Learning (University of Pittsburgh),…

Environmental Education in Serbian Primary Schools: Challenges and Changes in Curriculum, Pedagogy, and Teacher Training

ERIC Educational Resources Information Center

Stanišic, Jelena; Maksic, Slavica

2014-01-01

The protection of human health and the preservation of the environment are topics that form an integral part of the primary school curriculum in Serbia. However, research studies have shown that students do not have enough knowledge to contribute to the development of a healthy lifestyle and environmental awareness. The latest changes in school…

Conjunctive Cohesion in English Language EU Documents--A Corpus-Based Analysis and Its Implications

ERIC Educational Resources Information Center

Trebits, Anna

2009-01-01

This paper reports the findings of a study which forms part of a larger-scale research project investigating the use of English in the documents of the European Union (EU). The documents of the EU show various features of texts written for legal, business and other specific purposes. Moreover, the translation services of the EU institutions often…

Microwave Moisture Sensing of Seedcotton: Part 1: Seedcotton Microwave Material Properties.

PubMed

Pelletier, Mathew G; Wanjura, John D; Holt, Greg A

2016-11-02

Moisture content at harvest is a key parameter that impacts quality and how well the cotton crop can be stored without degrading before processing. It is also a key parameter of interest for harvest time field trials as it can directly influence the quality of the harvested crop as well as skew the results of in-field yield and quality assessments. Microwave sensing of moisture has several unique advantages over lower frequency sensing approaches. The first is that microwaves are insensitive to variations in conductivity, due to presence of salts or minerals. The second advantage is that microwaves can peer deep inside large bulk packaging to assess the internal moisture content without performing a destructive tear down of the package. To help facilitate the development of a microwave moisture sensor for seedcotton; research was performed to determine the basic microwave properties of seedcotton. The research was performed on 110 kg micro-modules, which are of direct interest to research teams for use in ongoing field-based research projects. It should also prove useful for the enhancement of existing and future yield monitor designs. Experimental data was gathered on the basic relations between microwave material properties and seedcotton over the range from 1.0 GHz to 2.5 GHz and is reported on herein. This research is part one of a two-part series that reports on the fundamental microwave properties of seedcotton as moisture and density vary naturally during the course of typical harvesting operations; part two will utilize this data to formulate a prediction algorithm to form the basis for a prototype microwave moisture sensor.

Microwave Moisture Sensing of Seedcotton: Part 1: Seedcotton Microwave Material Properties

PubMed Central

Pelletier, Mathew G.; Wanjura, John D.; Holt, Greg A.

2016-01-01

Moisture content at harvest is a key parameter that impacts quality and how well the cotton crop can be stored without degrading before processing. It is also a key parameter of interest for harvest time field trials as it can directly influence the quality of the harvested crop as well as skew the results of in-field yield and quality assessments. Microwave sensing of moisture has several unique advantages over lower frequency sensing approaches. The first is that microwaves are insensitive to variations in conductivity, due to presence of salts or minerals. The second advantage is that microwaves can peer deep inside large bulk packaging to assess the internal moisture content without performing a destructive tear down of the package. To help facilitate the development of a microwave moisture sensor for seedcotton; research was performed to determine the basic microwave properties of seedcotton. The research was performed on 110 kg micro-modules, which are of direct interest to research teams for use in ongoing field-based research projects. It should also prove useful for the enhancement of existing and future yield monitor designs. Experimental data was gathered on the basic relations between microwave material properties and seedcotton over the range from 1.0 GHz to 2.5 GHz and is reported on herein. This research is part one of a two-part series that reports on the fundamental microwave properties of seedcotton as moisture and density vary naturally during the course of typical harvesting operations; part two will utilize this data to formulate a prediction algorithm to form the basis for a prototype microwave moisture sensor. PMID:27827857

Modeling of flow stress size effect based on variation of dislocation substructure in micro-tension of pure nickel

NASA Astrophysics Data System (ADS)

Wang, Chuanjie; Liu, Huan; Zhang, Ying; Chen, Gang; Li, Yujie; Zhang, Peng

2017-12-01

Micro-forming is one promising technology for manufacturing micro metal parts. However, the traditional metal-forming theories fail to analyze the plastic deformation behavior in micro-scale due to the size effect arising from the part geometry scaling down from macro-scale to micro-scale. To reveal the mechanism of plastic deformation behavior size effect in micro-scale, the geometrical parameters and the induced variation of microstructure by them need to be integrated in the developed constitutive models considering the free surface effect. In this research, the variations of dislocation cell diameter with original grain size, strain and location (surface grain or inner grain) are derived according the previous research data. Then the overall flow stress of the micro specimen is determined by employing the surface layer model and the relationship between dislocation cell diameter and the flow stress. This new developed constitutive model considers the original grain size, geometrical dimension and strain simultaneously. The flow stresses in micro-tensile tests of thin sheets are compared with calculated results using the developed constitutive model. The calculated and experimental results match well. Thus the validity of the developed constitutive model is verified.

Gender differences in neurological emergencies part II: a consensus summary and research agenda on traumatic brain injury.

PubMed

Wright, David W; Espinoza, Tamara R; Merck, Lisa H; Ratcliff, Jonathan J; Backster, Anika; Stein, Donald G

2014-12-01

Traumatic brain injury (TBI) is a major cause of death and disability worldwide. There is strong evidence that gender and sex play an important role across the spectrum of TBI, from pathophysiology to clinical care. In May 2014, Academic Emergency Medicine held a consensus conference "Gender-Specific Research in Emergency Care: Investigate, Understand, and Translate How Gender Affects Patient Outcomes." A TBI working group was formed to explore what was known about the influence of sex and gender on TBI and to identify gaps for future research. The findings resulted in four major recommendations to guide the TBI research agenda. © 2014 by the Society for Academic Emergency Medicine.

Commercial jet transport crashworthiness

NASA Technical Reports Server (NTRS)

Widmayer, E.; Brende, O. B.

1982-01-01

The results of a study to identify areas of research and approaches that may result in improved occupant survivability and crashworthiness of transport aircraft are given. The study defines areas of structural crashworthiness for transport aircraft which might form the basis for a research program. A 10-year research and development program to improve the structural impact resistance of general aviation and commercial jet transport aircraft is planned. As part of this program parallel studies were conducted to review the accident experience of commercial transport aircraft, assess the accident performance of structural components and the status of impact resistance technology, and recommend areas of research and development for that 10-year plan. The results of that study are also given.

Gender Differences in Neurological Emergencies Part II: A Consensus Summary and Research Agenda on Traumatic Brain Injury

PubMed Central

Wright, David W.; Espinoza, Tamara R.; Merck, Lisa H.; Ratcliff, Jonathan J.; Backster, Anika; Stein, Donald G.

2015-01-01

Traumatic brain injury (TBI) is a major cause of death and disability worldwide. There is strong evidence that gender and sex play an important role across the spectrum of TBI, from pathophysiology to clinical care. In May 2014, Academic Emergency Medicine held a consensus conference “Gender-Specific Research in Emergency Care: Investigate, Understand, and Translate How Gender Affects Patient Outcomes.” A TBI working group was formed to explore what was known about the influence of sex and gender on TBI and to identify gaps for future research. The findings resulted in four major recommendations to guide the TBI research agenda. PMID:25420582

The Evolution of Interstellar Gas: Massive Stars and the Dispersal of Neutral Material

NASA Technical Reports Server (NTRS)

Federman, Steven R.

2003-01-01

We studied the effects of newly formed O and B stars on their surrounding interstellar material through a combination of observations and theoretical modeling. The observational data came from measurements of absorption seen in the spectra of background, newly formed stars. Particular attention was given to stellar radiation which converts molecular to atomic material. Laboratory data on absorption cross sections relevant to the analysis and interpretation of carbon monoxide formed part of the effort. The grant supported Postdoctoral Fellows, Drs. Min Yan and Yaron Sheffer, and a laboratory technician. Though the students themselves were not supported. one M.S. Thesis and two Ph.D. dissertations from the University of Toledo were based on the research done under the grant. The research accomplished under this grant led directly to other funded programs. An observing proposal to study the chemistry of diffuse molecular clouds in the Large and Small Magellanic Clouds with ESO s Very Large Telescope was another example of a successful outcome of my LTSA program.

Monitoring the transformation of Yogyakarta’s urban form using remote sensing and Geographic Information System

NASA Astrophysics Data System (ADS)

Rozano, B.; Yan, W.

2018-04-01

Urban form transformation can be seen as the results of urbanization spatially, where the land changed into an urbanized one. Monitoring its changes, however, require many human and financial resources. Accordingly, this research aims to identify urban form transformation using GIS/remote sensing and its spatial implications to the peri-urban area. In order to analyze the land cover changes, this research uses multispectral images from 1990-2016 for built-up extraction using New Built Up Index (NBUI) analysis and population data 1996-2015 combined with primary data from the respondents and key informants. Based on the analysis, it is seen that the compacted Yogyakarta Urban Area scattered predominantly to the Northern part of its periphery with the increase of urban area from 21.19% in 1990 to 50.91% in 2017. While this urbanization is an on-going process, the population of urban core showed a de-concentration phenomenon in 2015, spreading to its periphery causing some negative implications to the peri-urban area.

12 CFR Appendix B to Part 202 - Model Application Forms

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 2 2014-01-01 2014-01-01 false Model Application Forms B Appendix B to Part... CREDIT OPPORTUNITY ACT (REGULATION B) Pt. 202, App. B Appendix B to Part 202—Model Application Forms 1... appear on the creditor's form. 3. If a creditor uses an appropriate Appendix B model form, or modifies a...

A modular tooling set-up for incremental sheet forming (ISF) with subsequent stress-relief annealing under partial constraints

NASA Astrophysics Data System (ADS)

Maqbool, Fawad; Bambach, Markus

2017-10-01

Incremental sheet forming (ISF) is a manufacturing process most suitable for small-batch production of sheet metal parts. In ISF, a CNC-controlled tool moves over the sheet metal, following a specified contour to form a part of the desired geometry. This study focuses on one of the dominant process limitations associated with the ISF, i.e., the limited geometrical accuracy. In this regard, a case study is performed which shows that increased geometrical accuracy of the formed part can be achieved by a using stress-relief annealing before unclamping. To keep the tooling costs low, a modular die design consisting of a stiff metal frame and inserts made from inexpensive plastics (Sika®) were devised. After forming, the plastics inserts are removed. The metal frame supports the part during stress-relief annealing. Finite Element (FE) simulations of the manufacturing process are performed. Due to the residual stresses induced during the forming, the geometry of the formed part, from FE simulation and the actual manufacturing process, shows severe distortion upon unclamping the part. Stress relief annealing of the formed part under partial constraints exerted by the tool frame shows that a part with high geometrical accuracy can be obtained.

Deception in medical and behavioral research: is it ever acceptable?

PubMed

Wendler, D

1996-01-01

Ethicists argue that deception is unacceptable, whereas researchers regard it as a necessary part of (certain kinds of) research. This impasse could be resolved by establishing the specific conditions under which deception in medical and behavioral research can be tolerated. An approach based on a consideration of the "Ethical Principles of Psychologists and Code of Conduct," one of the few writings on this topic, would satisfy the needs of both parties. It takes the form of a requirement that subjects be informed of the use of deception before enrolling in a deceptive study. This "second order consent" approach to acceptable deception represents our best chance for reconciling respect for subjects with the occasional scientific need for deceptive research.

Clinical supervision: an important part of every nurse's practice.

PubMed

Bifarin, Oladayo; Stonehouse, David

2017-03-23

Clinical supervision involves a supportive relationship between supervisor and supervisee that facilitates reflective learning and is part of professional socialisation. Clinical supervision can take many different forms and may be adapted to suit local circumstances. A working agreement is required between the parties to the supervision and issues surrounding confidentiality must be understood. High-quality clinical supervision leads to greater job satisfaction and less stress. When it is absent or inadequate, however, the results can be serious and it is particularly important that student nurses are well supported in this way. Further research in this area is necessary.

Coal resources of the Hazard District, Kentucky: Breathitt, Knott, Leslie, Perry and parts of Harlan and Letcher counties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brant, R.A.; Chesnut, D.R.; Frankie, W.T.

This report is the fifth in the Energy Resource Series published by the University of Kentucky Institute for Mining and Minerals Research (IMMR), with the Kentucky Geological Survey (KGS). It summarizes the coal resources of the Hazard District (Breathitt, Knott, Leslie, Perry, and parts of Harlan and Letcher counties) of the Eastern Kentucky Coal Field as calculated by the Kentucky Geological Survey. Tonnage estimates for the individual coal beds in the district are presented in tabular form, along with resource maps of the major coal beds.

Effect of the Discharge Water which Mixed Sewage Disposal Water with Seawater Desalting Treated Sewage for Bottom Sediment and Hypoxic Water Mass

NASA Astrophysics Data System (ADS)

Watanabe, Ryoichi; Yamasaki, Koreyoshi; Minagawa, Tomoko; Iyooka, Hiroki; Kitano, Yoshinori

For every time in summer season, hypoxic water mass has formed at the inner part of Hakata Bay. Field observation study has carried out at the inner part of Hakata Bay since 2004 with the particular aim of tracking the movement of hypoxic water mass. Hypoxic water masses form the end of June to September on this area because the consumption of oxygen in bottom water layers exceeds the re-supply of oxygen from the atmosphere. Under such hypoxic conditions, the seawater desalination plant has begun to use in 2005. After seawater desalination plant operation starting, hypoxic water mass tends to improve. In this research, the authors show the following result. After seawater desalination plant has begun to operate, the hypoxia around the mixed discharge water outlet tends to be improved.

Hardness and microstructure analysis of damaged gear caused by adhesive wear

NASA Astrophysics Data System (ADS)

Mahendra, Rizky Budi; Nugroho, Sri; Ismail, Rifky

2018-03-01

This study was a result from research on repairing project of damaged elevator gear box. The objective of this research is to analyze the failure part on elevator gearbox at flourmill factory. The equipment was damaged after one year installed and running on factory. Severe wear was occurred on high speed helical gear. These helical gear was one of main part of elevator gearbox in flour mill manufacture. Visually, plastic deformation didn't occurred and not visible on the failure helical gear shaft. Some test would be performed to check the chemical composition, microstructure and hardness of failure helical gear. The material of failure helical gear shaft was a medium carbon steel alloy. The microstructure was showed a martensitic phase formed on the surface to the center area of gear shaft. Otherwise, the depth of hardness layer slight formed on surface and lack depth of hardness layer was a main trigger of severe wear. It was not enough to resist wear due to friction caused by rolling and sliding on surface between high speed gear and low speed gear. Enhancement of hardness layer on surface and depth of hardness layer will make the component has more long life time. Furthermore, to perform next research is needed to analyze the reliability of enhanced hardness on layer and depth of hardness layer on helical gear shaft.

Lesbians in China's mainland: a brief introduction.

PubMed

Chen, Yaya; Chen, Yiquin

2006-01-01

This paper describes and introduces lesbians' lives and the relevant research in China's Mainland. The first part shows the slow development of lesbian culture in the form of literature, films and documentaries. Although lesbians' lives were reflected more or less in modern literature, the "true" lesbian novel was published only recently. Relevant films and documentaries were never shown to the public in China. Lesbian culture is still unevenly developed and remains negligible. The first part also describes lesbian research in the field of literature, psychiatry and sociology. The relevant research in literature is relatively systematic and rich, while that in psychiatry is fraught with discrimination and that in sociology is relatively weak. The second part presents the observation and analysis of lesbian Internet communities. It deals with lesbians' self-identity, role differentiation, sentiments and sexuality. Among them, role differentiation plays an important part in lesbians' lives though few researchers have studied it. Most lesbian organizations founded on the strength of Internet communication lack experience and resources and have little influence on the masses. Some lesbians are accepted by the public, but in return, they compromise to some popular values. This is extremely disadvantageous to those who are unwilling to give in. At the end of the paper, the first author expresses her future plan that she will continue her study on lesbian culture under the help of Internet observation and various activities. doi:10.1300/J155v10n03_08.

Measuring Thermoforming Behaviour

NASA Astrophysics Data System (ADS)

Michaeli, W.; Hopmann, C.; Ederleh, L.; Begemann, M.

2011-05-01

Thermoforming is the process of choice for manufacturing thin-gauge or large-area parts for packaging or technical applications. The process allows low-weight parts to be produced rapidly and economically from thermoplastic semi-finished products. A technical and consequently economical problem is the choice of the right material in combination with the thermoformability of the product. The prediction of thermoformability includes the aspired product features and geometry and defined wall thickness distributions, depending on the specific stretchability of the semifinished product. In practice, thermoformability is estimated by empirical tests with the particular semi-finished product using e.g. staged pyramidal moulds or model cars. With this method, it still cannot be ensured that the product can be thermoformed with the intended properties. A promising alternative is the forming simulation using finite element analysis (FEA). For the simulation, it is necessary to describe the material behaviour using defined material models and the appropriate parameters. Therefore, the stress-/strain-behaviour of the semi-finished product under defined conditions is required. There are several, entirely different measurement techniques used in industry and at research facilities. This paper compares a choice of different measurement techniques to provide an objective basis for future work and research. The semi-finished products are examined with the Membrane-Inflation-Rheometer (MIR), an equibiaxial strain rheometer. A flat sample is heated to the desired temperature in silicone oil. During the measurement, a servohydraulic linear drive advances a piston, thus displacing the hot silicone oil and inflating the specimen to form a sphere. Further measurements are carried out with the Karo IV Laboratory Stretching Machine at Brückner Maschinenbau GmbH & Co. KG, Siegsdorf, Germany. The samples are heated using hot air. During the biaxial stretching, the resulting forces at the clamps are measured. These techniques are compared to the stretching device developed at IKV. This measuring device is integrated into a laboratory thermoforming machine, which allows a close-to-real-process heating, handling and forming of the semi-finished products. After the heating with IR-radiation, force-displacement data is measured during the equibiaxial deformation. This work shows the differences between these methods and emphasises the particular benefits. Further measurement methods, like uniaxial tensile tests and plug deformation, and the effects on the forming simulation will be part of future research.

Methodology Series Module 9: Designing Questionnaires and Clinical Record Forms - Part II.

PubMed

Setia, Maninder Singh

2017-01-01

This article is a continuation of the previous module on designing questionnaires and clinical record form in which we have discussed some basic points about designing the questionnaire and clinical record forms. In this section, we will discuss the reliability and validity of questionnaires. The different types of validity are face validity, content validity, criterion validity, and construct validity. The different types of reliability are test-retest reliability, inter-rater reliability, and intra-rater reliability. Some of these parameters are assessed by subject area experts. However, statistical tests should be used for evaluation of other parameters. Once the questionnaire has been designed, the researcher should pilot test the questionnaire. The items in the questionnaire should be changed based on the feedback from the pilot study participants and the researcher's experience. After the basic structure of the questionnaire has been finalized, the researcher should assess the validity and reliability of the questionnaire or the scale. If an existing standard questionnaire is translated in the local language, the researcher should assess the reliability and validity of the translated questionnaire, and these values should be presented in the manuscript. The decision to use a self- or interviewer-administered, paper- or computer-based questionnaire depends on the nature of the questions, literacy levels of the target population, and resources.

Methodology Series Module 9: Designing Questionnaires and Clinical Record Forms – Part II

PubMed Central

Setia, Maninder Singh

2017-01-01

This article is a continuation of the previous module on designing questionnaires and clinical record form in which we have discussed some basic points about designing the questionnaire and clinical record forms. In this section, we will discuss the reliability and validity of questionnaires. The different types of validity are face validity, content validity, criterion validity, and construct validity. The different types of reliability are test-retest reliability, inter-rater reliability, and intra-rater reliability. Some of these parameters are assessed by subject area experts. However, statistical tests should be used for evaluation of other parameters. Once the questionnaire has been designed, the researcher should pilot test the questionnaire. The items in the questionnaire should be changed based on the feedback from the pilot study participants and the researcher's experience. After the basic structure of the questionnaire has been finalized, the researcher should assess the validity and reliability of the questionnaire or the scale. If an existing standard questionnaire is translated in the local language, the researcher should assess the reliability and validity of the translated questionnaire, and these values should be presented in the manuscript. The decision to use a self- or interviewer-administered, paper- or computer-based questionnaire depends on the nature of the questions, literacy levels of the target population, and resources. PMID:28584367

Towards an epidemiology of political violence in the Third World.

PubMed

Zwi, A; Ugalde, A

1989-01-01

Political violence is distressingly widespread in many parts of the world. This paper reviews the forms and effects of political violence and devotes particular attention to experiences from Central America and Southern Africa. The forms of violence vary from those which are extensive such as civil unrest and war, to those which are intensive, such as assassinations, disappearances and torture. The effects of violence on health may be direct, such as deaths, disabilities, psychological stress and the destruction of health services, or indirect such as the erosion of innovative health policies in favour of increased military expenditure. Health workers have a role to play in opposing political violence, providing care for those affected by violence, and documenting and analysing its impact on health. Research needs include documenting the impact of different forms of violence on health, and analysing the social and political factors which promote and support political violence. It is hoped that increasing recognition of political violence and man-made violence as being of major public health concern will play a part in promoting a more peaceful world.

Mars Life? - Orange-colored Carbonate Mineral Globules

NASA Technical Reports Server (NTRS)

1996-01-01

This photograph shows orange-colored carbonate mineral globules found in a meteorite, called ALH84001, believed to have once been a part of Mars. These carbonate minerals in the meteorite are believed to have been formed on Mars more than 3.6 billion years ago. Their structure and chemistry suggest that they may have been formed with the assistance of primitive, bacteria-like living organisms. A two-year investigation by a NASA research team found organic molecules, mineral features characteristic of biological activity and possible microscopic fossils inside of carbonate minerals such as these in the meteorite.

Consideration of genetic contributions to the risk for spasmodic dysphonia.

PubMed

Sharma, Nutan; Franco, Ramon A

2011-09-01

Spasmodic dysphonia, a form of the neurologic condition known as dystonia, results from involuntary spasms of the larynx, producing interruptions of speech and changes in voice quality. The pathogenesis of spasmodic dysphonia is not well understood. However, several genetic mutations have been identified that cause different forms of dystonia. In some individuals, these genetic mutations result in spasmodic dysphonia, either with no other signs of dystonia or as part of a broader dystonia phenotype. Thus, research in the growing field of dystonia genetics may help to inform our understanding of the pathogenesis of spasmodic dysphonia.

The finite element simulation analysis research of 38CrSi cylindrical power spinning

NASA Astrophysics Data System (ADS)

Liang, Wei; Lv, Qiongying; Zhao, Yujuan; Lv, Yunxia

2018-01-01

In order to grope for the influence of the main cylindrical spinning process parameters on the spinning process, this paper combines with real tube power spinning process and uses ABAQUS finite element analysis software to simulate the tube power spinning process of 38CrSi steel materials, through the analysis of the stress, strain of the part forming process, analyzes the influence of the thickness reduction and the feed rate to the forming process, and analyzes the variation of the spinning force, finally determines the reasonable main spinning process parameters combination.

Vulnerability Assessments in Support of the Climate Ready ...

EPA Pesticide Factsheets

As part of the Climate Ready Estuaries (CRE) program, the Global Change Research Program (GCRP) in the National Center for Environmental Assessment, Office of Research and Development at the U.S. Environmental Protection Agency has prepared a report exploring a new methodology for climate change vulnerability assessments using Massachusetts Bays’ salt marsh ecosystem as a demonstration. The aim is to synthesize place-based information on the potential implications of climate change for key ecosystem processes in each estuary, in a form that will enable managers to undertake management adaptation planning.

An overview on European SPS activities

NASA Technical Reports Server (NTRS)

Reinhartz, K. K.

1980-01-01

The organization of space and energy research in Europe is discussed. The European situation is highlighted with emphasis on the dependency of energy imports and on the energy requirements of Europe. The status of SPS research in the countries that form the European Space Agency was reviewed. It is concluded that in view of the unfavorable geographical and climatic situation of large parts of Europe, terrestrial solar energy conversion is unlikely to make a significant contribution to Europe's future energy supply. Thus, SPS development is of special interest to the European community.

Indirect electrochemical oxidation of 2,4-dichlorophenoxyacetic acid using electrochemically-generated persulfate.

PubMed

Cai, Jingju; Zhou, Minghua; Liu, Ye; Savall, André; Groenen Serrano, Karine

2018-08-01

This research investigated persulfate electrosynthesis using a boron-doped diamond anode and a chemical reaction of persulfate in its activated form with an herbicide, 2,4-Dichlorophenoxyacetic acid (2,4-D). The first part of this research is dedicated to the influence of the applied current density on the electrosynthesis of persulfate. The first part shows that for a 2 M sulfuric acid, the current efficiency reached 96% for 5 mA/cm 2 and dropped to 52% for a higher current density (100 mA cm -2 ). This fall cannot be explained by mass transfer limitations: an increase in temperature (from 9 to 30 °C) during electrolysis leads to the decomposition of 23% of the persulfate. The second part of this research shows that a quasi-complete degradation of the target herbicide can be reached under controlled operating conditions: (i) a high ratio of initial concentrations [Persulfate]/[2,4-D], (ii) a minimum temperature of 60 °C that produces sulfate radicals by heat decomposition of persulfate, and (iii) a sufficient contact time between reactants is required under dynamic conditions. Copyright © 2018 Elsevier Ltd. All rights reserved.

Use of high-speed photography and associated techniques as a measurement tool in the research, development, test, and evaluation of weapons systems and armaments

NASA Astrophysics Data System (ADS)

Haddleton, Graham P.

1995-05-01

Photography's inestimable contribution to science and technology is beyond question. Applied photography, or in this case applied cinematography, is that area of work which assumes an integral part of a research project and where the results of photographic analysis form a major source of information. In military research and development or testing there are various fast events that need to be recorded and analyzed. High speed cameras allow the capture of movement too fast to be recognized by the human eye and provide data that is essential for the analysis of such events.

Experimental research and numerical optimisation of multi-point sheet metal forming implementation using a solid elastic cushion system

NASA Astrophysics Data System (ADS)

Tolipov, A. A.; Elghawail, A.; Shushing, S.; Pham, D.; Essa, K.

2017-09-01

There is a growing demand for flexible manufacturing techniques that meet the rapid changes in customer needs. A finite element analysis numerical optimisation technique was used to optimise the multi-point sheet forming process. Multi-point forming (MPF) is a flexible sheet metal forming technique where the same tool can be readily changed to produce different parts. The process suffers from some geometrical defects such as wrinkling and dimpling, which have been found to be the cause of the major surface quality problems. This study investigated the influence of parameters such as the elastic cushion hardness, blank holder force, coefficient of friction, cushion thickness and radius of curvature, on the quality of parts formed in a flexible multi-point stamping die. For those reasons, in this investigation, a multipoint forming stamping process using a blank holder was carried out in order to study the effects of the wrinkling, dimpling, thickness variation and forming force. The aim was to determine the optimum values of these parameters. Finite element modelling (FEM) was employed to simulate the multi-point forming of hemispherical shapes. Using the response surface method, the effects of process parameters on wrinkling, maximum deviation from the target shape and thickness variation were investigated. The results show that elastic cushion with proper thickness and polyurethane with the hardness of Shore A90. It has also been found that the application of lubrication cans improve the shape accuracy of the formed workpiece. These final results were compared with the numerical simulation results of the multi-point forming for hemispherical shapes using a blank-holder and it was found that using cushion hardness realistic to reduce wrinkling and maximum deviation.

Symposium 'Methodology in Medical Education Research' organised by the Methodology in Medical Education Research Committee of the German Society of Medical Education May, 25th to 26th 2013 at Charité, Berlin.

PubMed

Schüttpelz-Brauns, Katrin; Kiessling, Claudia; Ahlers, Olaf; Hautz, Wolf E

2015-01-01

In 2013, the Methodology in Medical Education Research Committee ran a symposium on "Research in Medical Education" as part of its ongoing faculty development activities. The symposium aimed to introduce to participants educational research methods with a specific focus on research in medical education. Thirty-five participants were able to choose from workshops covering qualitative methods, quantitative methods and scientific writing throughout the one and a half days. The symposium's evaluation showed participant satisfaction with the format as well as suggestions for future improvement. Consequently, the committee will offer the symposium again in a modified form in proximity to the next annual Congress of the German Society of Medical Education.

32 CFR Appendix C to Part 45 - DD Form 215

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false DD Form 215 C Appendix C to Part 45 National... CERTIFICATE OF RELEASE OR DISCHARGE FROM ACTIVE DUTY (DD FORM 214/5 SERIES) Pt. 45, App. C Appendix C to Part 45—DD Form 215 EC21OC91.050 ...

49 CFR Appendix G to Part 40 - Alcohol Testing Form

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 1 2012-10-01 2012-10-01 false Alcohol Testing Form G Appendix G to Part 40 Transportation Office of the Secretary of Transportation PROCEDURES FOR TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Pt. 40, App. G Appendix G to Part 40—Alcohol Testing Form The following form is the...

49 CFR Appendix G to Part 40 - Alcohol Testing Form

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false Alcohol Testing Form G Appendix G to Part 40 Transportation Office of the Secretary of Transportation PROCEDURES FOR TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Pt. 40, App. G Appendix G to Part 40—Alcohol Testing Form The following form is the...

49 CFR Appendix G to Part 40 - Alcohol Testing Form

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false Alcohol Testing Form G Appendix G to Part 40 Transportation Office of the Secretary of Transportation PROCEDURES FOR TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Pt. 40, App. G Appendix G to Part 40—Alcohol Testing Form The following form is the...

49 CFR Appendix G to Part 40 - Alcohol Testing Form

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 1 2014-10-01 2014-10-01 false Alcohol Testing Form G Appendix G to Part 40 Transportation Office of the Secretary of Transportation PROCEDURES FOR TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Pt. 40, App. G Appendix G to Part 40—Alcohol Testing Form The following form is the...

49 CFR Appendix G to Part 40 - Alcohol Testing Form

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Alcohol Testing Form G Appendix G to Part 40 Transportation Office of the Secretary of Transportation PROCEDURES FOR TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Pt. 40, App. G Appendix G to Part 40—Alcohol Testing Form The following form is the...

Radon as a natural tracer for underwater cave exploration and hypogenic cave formation

NASA Astrophysics Data System (ADS)

Csondor, Katalin; Erőss, Anita; Horváth, Ákos; Szieberth, Dénes

2017-04-01

Using 222Rn as a natural tracer is a novel approach in underwater cave exploration and in the research of active hypogenic caves. The research area, the Molnár János cave is one of the largest caves of an unique hypogenic karst system, the Buda Thermal Karst (Budapest, Hungary). The cave system is mainly characterized by water-filled passages. The cave is located at one of the main discharge areas of the Buda Thermal Karst and the major outflow point of the waters of the cave system is the Boltív spring, which feeds the artificial Malom Lake. Previous complex hydrogeological studies and radon measurements in the cave system and in the spring established the highest radon concentration (71 Bq/L, where the average is 44 Bq/L) in the springwater. The origin of radon was identified in the form of iron-hydroxide containing biofilms, which form by mixing of waters and efficiently adsorb radium from the thermal water component and cause local radon anomalies. Since mixing of waters is responsible for the formation of the cave as well, these iron-hydroxide containing biofilms and consequently high radon concentrations mark the active cave forming zones. The aim of the study was to use the radon as a natural tracer to locate active mixing and cave forming zones. Based on previous radon measurements it is supposed that the active mixing and cave forming zone has to be close to the spring, since the highest radon concentration was measured there. Therefore, the radon activity concentration mapping was carried out with the help of divers and involving that part of the cave which closest to the spring. Based on our measurements the highest radon concentration (84 Bq/L) ever was achieved in the springwater. Based on the radon concentration distribution direct connection and active karst conduit was established between the spring and the deepest room of the researched part of the cave, which was verified by artificial tracer as well. However, the distribution of radon in the cave passages shows lower concentrations (18-46 Bq/L) compared to the spring, therefore an addition deep inflow from a hitherto unknown cave passages is assumed, from which waters with high radon content arrive to the spring. These passages are supposed to be in the active cave formation (mixing) zone. The Buda Thermal Karst research was funded by the Hungarian Scientific Research Fund under the grant agreement no. NK 101356.

Modified locking thread form for fastener

NASA Technical Reports Server (NTRS)

Roopnarine, (Inventor); Vranish, John D. (Inventor)

1998-01-01

A threaded fastener has a standard part with a standard thread form characterized by thread walls with a standard included angle, and a modified part complementary to the standard part having a modified thread form characterized by thread walls which are symmetrically inclined with a modified included angle that is different from the standard included angle of the standard part's thread walls, such that the threads of one part make pre-loaded edge contact with the thread walls of the other part. The thread form of the modified part can have an included angle that is greater, less, or compound as compared to the included angle of the standard part. The standard part may be a bolt and the modified part a nut, or vice versa. The modified thread form holds securely even under large vibrational forces, it permits bi-directional use of standard mating threads, is impervious to the build up of tolerances and can be manufactured with a wider range of tolerances without loss of functionality, and distributes loading stresses (per thread) in a manner that decreases the possibility of single thread failure.

Performance analysis of the incremental sheet forming on PMMA using a combined chemical and mechanical approach

NASA Astrophysics Data System (ADS)

Conte, R.; Gagliardi, F.; Ambrogio, G.; Filice, F.; Russo, P.

2017-10-01

Single Point Incremental Forming (SPIF) has been widely investigated highlighting advantages as low-cost, higher formability and greater process flexibility if compared to traditional processes [1]. Recent works have proven the SPIF feasibility for polymers processing. Experimental researches have been carried out with the aim to investigate the influence of several working variables, i.e. spindle speed, tool diameter, step depth, etc., on the final quality of the formed parts [2, 3]. The processed thermoplastic materials are characterized by glass temperatures close to the room temperature and, therefore, SPIF has been performed without external thermal source, exploiting mostly the friction heat generated during the forming phases. In the proposed work, the attention has been focused on extruded poly(methyl methacrylate) (PMMA) sheets, which are characterized by a glass temperature of more than 100 °C. Because of that, an experimental equipment has been designed and the PMMA sheets have been placed on the top of chamber with controlled temperature before SPIF beginning. The temperature on the upper face of the sheets has been monitored by thermocamera, which has been properly set by matching its readings with the ones extracted by a thermocouple in contact with the sheets. SPIF at different temperatures has been carried out by changing both the heater temperature and the process parameters which have an influence on the workpiece heating. The influence of the highlighted process conditions on the worked parts and on the process feasibility has been investigated. Furthermore, examinations on the quality of the formed parts have been performed pointing out the effects that different process conditions have on surface integrity.

Processing of laser formed SiC powder

NASA Technical Reports Server (NTRS)

Haggerty, J. S.; Bowen, H. K.

1987-01-01

Processing research was undertaken to demonstrate that superior SiC characteristics could be achieved through the use of ideal constituent powders and careful post-synthesis processing steps. Initial research developed the means to produce approximately 1000 A uniform diameter, nonagglomerated, spherical, high purity SiC powders. Accomplishing this goal required major revision of the particle formation and growth model from one based on classical nucleation and growth to one based on collision and coalescence of Si particles followed by their carburization. Dispersions based on pure organic solvents as well as steric stabilization were investigated. Test parts were made by the colloidal pressing technique; both liquid filtration and consolidation (rearrangement) stages were modeled. Green densities corresponding to a random close packed structure were achieved. After drying, parts were densified at temperatures ranging from 1800 to 2100 C. This research program accomplished all of its major objectives. Superior microstructures and properties were attained by using powders having ideal characteristics and special post-synthesis processing procedures.

Adding part-of-speech information to the SUBTLEX-US word frequencies.

PubMed

Brysbaert, Marc; New, Boris; Keuleers, Emmanuel

2012-12-01

The SUBTLEX-US corpus has been parsed with the CLAWS tagger, so that researchers have information about the possible word classes (parts-of-speech, or PoSs) of the entries. Five new columns have been added to the SUBTLEX-US word frequency list: the dominant (most frequent) PoS for the entry, the frequency of the dominant PoS, the frequency of the dominant PoS relative to the entry's total frequency, all PoSs observed for the entry, and the respective frequencies of these PoSs. Because the current definition of lemma frequency does not seem to provide word recognition researchers with useful information (as illustrated by a comparison of the lemma frequencies and the word form frequencies from the Corpus of Contemporary American English), we have not provided a column with this variable. Instead, we hope that the full list of PoS frequencies will help researchers to collectively determine which combination of frequencies is the most informative.

48 CFR 53.200 - Scope of subpart.

Code of Federal Regulations, 2010 CFR

2010-10-01

... to, the parts of the FAR in which the form usage requirements are addressed. For example, forms...; forms addressed in FAR part 43, Contract Modifications, are treated in this subpart in section 53.243... AND FORMS FORMS Prescription of Forms 53.200 Scope of subpart. This subpart prescribes standard forms...

17 CFR 405.2 - Reports to be made by registered government securities brokers and dealers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... government securities broker or dealer shall file Part I of Form BD-Y2K (§ 249.618 of this title) prepared as..., shall file Part II of Form BD-Y2K (§ 249.618 of this title). Part II of Form BD-Y2K shall address each... registered government securities broker or dealer that was not required to file Part II of Form BD-Y2K under...

Archive data base and handling system for the Orbiter flying qualities experiment program

NASA Technical Reports Server (NTRS)

Myers, T. T.; Dimarco, R.; Magdaleno, R. E.; Aponso, B. L.

1986-01-01

The OFQ archives data base and handling system assembled as part of the Orbiter Flying Qualities (OFQ) research of the Orbiter Experiments Program (EOX) are described. The purpose of the OFQ archives is to preserve and document shuttle flight data relevant to vehicle dynamics, flight control, and flying qualities in a form that permits maximum use for qualified users. In their complete form, the OFQ archives contain descriptive text (general information about the flight, signal descriptions and units) as well as numerical time history data. Since the shuttle program is so complex, the official data base contains thousands of signals and very complex entries are required to obtain data. The OFQ archives are intended to provide flight phase oriented data subsets with relevant signals which are easily identified for flying qualities research.

Common and rare forms of diabetes mellitus: towards a continuum of diabetes subtypes.

PubMed

Flannick, Jason; Johansson, Stefan; Njølstad, Pål R

2016-07-01

Insights into the genetic basis of type 2 diabetes mellitus (T2DM) have been difficult to discern, despite substantial research. More is known about rare forms of diabetes mellitus, several of which share clinical and genetic features with the common form of T2DM. In this Review, we discuss the extent to which the study of rare and low-frequency mutations in large populations has begun to bridge the gap between rare and common forms of diabetes mellitus. We hypothesize that the perceived division between these diseases might be due, in part, to the historical ascertainment bias of genetic studies, rather than a clear distinction between disease pathophysiologies. We also discuss possible implications of a new model for the genetic basis of diabetes mellitus subtypes, where the boundary between subtypes becomes blurred.

[Positive aspects of old ages - humor of seniors].

PubMed

Mareš, Jiří

2015-01-01

This survey study has five parts. In the first part two conceptual approaches to humor are characterized. One considers "the comic" to be an umbrella concept, and humor is only one of its rather positive forms. The other comes out from the umbrella concept "humor", and distinguishes between various forms of humor including the negative ones. Three main theories of humor are presented: theory of superiority, theory of incongruity, and a relief theory. The second part introduces humor in the elderly and draws the attention to the fact that we know relatively little about humor in old age because most research has been carried out in children, adolescents or adults in productive age. The third part of the study describes the process of diagnostics of humor in the elderly. For example, within the qualitative methods, in-depth interviews with seniors or analyses of their diary entries are used. Within quantitative methods, questionnaires are used, and this study presents the survey of seven most frequent ones applied in the studies of humor in the elderly. In the context of mixed methods, understanding of humor in young and seniors, or understanding of humor in relatively healthy seniors and seniors after stroke are compared. The fourth part of the study presents the Gelkopfs model on relationship between humor, treatment and cure of patients. The fifth part of the study demonstrates the options how to use humor to improve the mental state of the elderly (by means of individual or group interventions).

32 CFR Appendix B to Part 45 - DD Form 214ws

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false DD Form 214ws B Appendix B to Part 45 National... CERTIFICATE OF RELEASE OR DISCHARGE FROM ACTIVE DUTY (DD FORM 214/5 SERIES) Pt. 45, App. B Appendix B to Part 45—DD Form 214ws EC23OC91.007 ...

12 CFR Appendix A to Part 704 - Model Forms

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Model Forms A Appendix A to Part 704 Banks and... Pt. 704, App. A Appendix A to Part 704—Model Forms This appendix contains sample forms intended for... corporate credit union. (8) Paid-in capital is perpetual maturity and noncumulative dividend. I have read...

12 CFR Appendix A to Part 704 - Model Forms

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Model Forms A Appendix A to Part 704 Banks and... Pt. 704, App. A Appendix A to Part 704—Model Forms This appendix contains sample forms intended for... corporate credit union. (8) Paid-in capital is perpetual maturity and noncumulative dividend. I have read...

16 CFR Appendix D to Part 698 - Standardized form for requesting annual file disclosures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Standardized form for requesting annual file disclosures. D Appendix D to Part 698 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT MODEL FORMS AND DISCLOSURES Pt. 698, App. D Appendix D to Part 698—Standardized form for...

024 PP: MEANINGFUL AND ENGAGING, OR TOKENISTIC? REFLECTIONS ON COLLABORATIVE ENGAGEMENT IN THE PROCESS OF DESIGNING SEXUAL HEALTH INTERVENTIONS

PubMed Central

Boydell, N; McDaid, L

2017-01-01

Working with non-academic partners and including participants, and other stakeholders, in the design and delivery of research is emerging as a critical element in the field of health research. As researchers based in an interdisciplinary team with a focus on the development of sexual health interventions, we have long recognised that engagement with individuals and communities is a critical part of the research process, and actively sought out opportunities to collaborate with non-academic partners with a view to ensuring that our work is relevant in the ‘real-world’. While the increasing call for ‘collaboration’, ‘patient and public involvement’ and ‘co-production’ is welcome, we recognise the possibility that without critical reflection on the part of the research team, such engagement can lack meaning for those being asked to participate, potentially reducing its value and risking it being perceived as tokenistic. In this paper we reflect on our experiences as qualitative researchers for whom a key role in interdisciplinary research teams has been undertaking a number of ‘patient public involvement’ projects with both young people and gay, bisexual and other men who have sex with men (MSM) to inform the development of sexual health interventions. We critically reflect on some of the challenges and opportunities involved in this form of ‘consultation’, and explore the ethical implications of engaging stakeholders in identifying issues they consider important as part of the design and delivery of future interventions, but which may not be considered either a priority or feasible.

Method of forming and assembly of metal parts and ceramic parts

DOEpatents

Ripley, Edward B [Knoxville, TN

2011-11-22

A method of forming and assembling at least two parts together that may be metal, ceramic, or a combination of metal and ceramic parts. Such parts may have different CTE. Individual parts that are formed and sintered from particles leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

Simultaneous acquisition of differing image types

DOEpatents

Demos, Stavros G

2012-10-09

A system in one embodiment includes an image forming device for forming an image from an area of interest containing different image components; an illumination device for illuminating the area of interest with light containing multiple components; at least one light source coupled to the illumination device, the at least one light source providing light to the illumination device containing different components, each component having distinct spectral characteristics and relative intensity; an image analyzer coupled to the image forming device, the image analyzer decomposing the image formed by the image forming device into multiple component parts based on type of imaging; and multiple image capture devices, each image capture device receiving one of the component parts of the image. A method in one embodiment includes receiving an image from an image forming device; decomposing the image formed by the image forming device into multiple component parts based on type of imaging; receiving the component parts of the image; and outputting image information based on the component parts of the image. Additional systems and methods are presented.

Uses and misuses of Bayes' rule and Bayesian classifiers in cybersecurity

NASA Astrophysics Data System (ADS)

Bard, Gregory V.

2017-12-01

This paper will discuss the applications of Bayes' Rule and Bayesian Classifiers in Cybersecurity. While the most elementary form of Bayes' rule occurs in undergraduate coursework, there are more complicated forms as well. As an extended example, Bayesian spam filtering is explored, and is in many ways the most triumphant accomplishment of Bayesian reasoning in computer science, as nearly everyone with an email address has a spam folder. Bayesian Classifiers have also been responsible significant cybersecurity research results; yet, because they are not part of the standard curriculum, few in the mathematics or information-technology communities have seen the exact definitions, requirements, and proofs that comprise the subject. Moreover, numerous errors have been made by researchers (described in this paper), due to some mathematical misunderstandings dealing with conditional independence, or other badly chosen assumptions. Finally, to provide instructors and researchers with real-world examples, 25 published cybersecurity papers that use Bayesian reasoning are given, with 2-4 sentence summaries of the focus and contributions of each paper.

Spanking and Child Development: We Know Enough Now To Stop Hitting Our Children

PubMed Central

Gershoff, Elizabeth T.

2013-01-01

Spanking remains a common, if controversial, childrearing practice in the United States. In this article, I pair mounting research indicating that spanking is both ineffective and harmful with professional and human rights opinions disavowing the practice. I conclude that spanking is a form of violence against children that should no longer be a part of American childrearing. PMID:24039629

Teaching on the Margins: Tutors, Discourse and Pedagogy in Work-Based Learning for Young People

ERIC Educational Resources Information Center

Thompson, Ron

2010-01-01

This paper presents research findings on practitioners working with young people on Entry to Employment (E2E) programmes in the north of England. E2E continues a long tradition of work-related learning for unemployed school leavers for whom other forms of education or training are deemed unsuitable, and is part of the UK government's strategy for…

Simplifying Causal Complexity: How Interactions between Modes of Causal Induction and Information Availability Lead to Heuristic-Driven Reasoning

ERIC Educational Resources Information Center

Grotzer, Tina A.; Tutwiler, M. Shane

2014-01-01

This article considers a set of well-researched default assumptions that people make in reasoning about complex causality and argues that, in part, they result from the forms of causal induction that we engage in and the type of information available in complex environments. It considers how information often falls outside our attentional frame…

How Children Can Support Their Learning to Write and Read by Computer in the Early Years of School

ERIC Educational Resources Information Center

Nurmilaakso, Marja

2015-01-01

Over the last decades the nature and form of what children can choose to read has changed radically, partly as a consequence of rapid technological advances and the increasing dominance of the image. The research questions were: (1) "How do children learn to read and write by computer?"; (2) "How can one support children's learning…

Research on the E-Textbook and E-Schoolbag in China: Constructing an Ecosystem of E-Textbook and E-Schoolbag

ERIC Educational Resources Information Center

Wu, Yonghe; Lin, Lin; Ma, Xiaoling; Zhu, Zhiting

2013-01-01

The e-Textbook and e-Schoolbag initiatives have received wide attention and have been seen as the trend towards future education. This paper describes the framework of e-Textbook and e-Schoolbag including its conceptual model and system model. It further discusses the five interconnected categories that form the main parts of this Ecosystem…

GRIP Experiment 2010

NASA Image and Video Library

2010-08-16

Cloud formations are seen through the window of NASA DC-8 aircraft during a flight, Tuesday, Aug. 17, 2010, over the Gulf of Mexico where researchers were studying weather patterns as part of trhe Genesis and Rapid Intensification Processes (GRIP) experiment, a NASA Earth science field experiment in 2010 that is being conducted to better understand how tropical storms form and develop into major hurricanes. Photo Credit: (NASA/Paul E. Alers)

The Teacher as a Significant Part of Inclusive Education in the Conditions of Czech Schools: Current Opinions of Czech Teachers about the Inclusive Form of Education

ERIC Educational Resources Information Center

Šmelová, Eva; Ludíková, Libuše; Petrová, Alena; Souralová, Eva

2016-01-01

Inclusive education and related aspects are currently the priorities of the educational policy in the Czech Republic. Should inclusion be successful, it needs to be supported not only by public administration authorities and legislation, but also by schools, families, school authorities and counselling services. The present research study analyses…

The Effect of Six Thinking Hats on Student Success in Teaching Subjects Related to Sustainable Development in Geography Classes

ERIC Educational Resources Information Center

Kaya, Mehmet Fatih

2013-01-01

This study aimed to assess the effectiveness of six thinking hats technique in teaching subjects related to sustainable development in geography classes. The study was in both a quantitative and qualitative form. The quantitative part of the study was designed according to pre-test, post-test control group research model, and in the qualitative…

Addressing the Uncertain Future of Preserving the Past: Towards a Robust Strategy for Digital Archiving and Preservation. Technical Report. Executive Summary

ERIC Educational Resources Information Center

Hoorens, Stijn; Rothenberg, Jeff; van Oranje-Nassau, Constantijn; van der Mandele, Martin; Levitt, Ruth

2007-01-01

Storing and curating authentic academic literature and making it accessible for the long term has been a time-honoured task of national libraries. By guarding existing knowledge and facilitating its use to produce new insights, national and university libraries have formed an integral part of the research environment, complementing the roles of…

Study: Blacks Are Less Likely to Seek Genetic Counseling to Assess Cancer Risk

ERIC Educational Resources Information Center

Black Issues in Higher Education, 2005

2005-01-01

Black women with a family history of breast cancer are much less likely than Whites to get genetic counseling, in part because of the mistaken notion that the genetic form of the illness is a White woman's disease, researchers say. While breast cancer generally is more common among White women, some data suggest both races have similar rates of…

The Infernal Business of Contract Cheating: Understanding the Business Processes and Models of Academic Custom Writing Sites

ERIC Educational Resources Information Center

Ellis, Cath; Zucker, Ian Michael; Randall, David

2018-01-01

While there is growing awareness of the existence and activities of Academic Custom Writing websites, which form a small part of the contract cheating industry, how they work remains poorly understood. Very little research has been done on these sites, probably because it has been assumed that it is impossible to see behind their firewalls and…

Implementing a Grant Proposal Writing Exercise in Undergraduate Science Courses to Incorporate Real-World Applications and Critical Analysis of Current Literature

ERIC Educational Resources Information Center

Cole, Kathryn E.; Inada, Maki; Smith, Andrew M.; Haaf, Michael P.

2013-01-01

Writing is an essential part of a successful career in science. As such, many undergraduate science courses have begun to implement writing assignments that reflect "real-world" applications and focus on a critical analysis of current literature; these assignments are often in the form of a review or a research proposal. The…

New clinical trial open for patients with muscle-invasive bladder cancer | Center for Cancer Research

Cancer.gov

Muscle-invasive bladder cancer is an aggressive form of bladder cancer in which the tumor invades deep into the musculature of the bladder wall, making it more likely to spread to other parts of the body. Standard treatment involves cisplatin-based chemotherapy followed by radical cystectomy, which is surgery to remove the bladder and nearby organs. However, many patients

Building Forts and Drawing on Walls: Fostering Student-Initiated Creativity inside and outside the Elementary Classroom

ERIC Educational Resources Information Center

Rufo, David

2012-01-01

The arts embody "one of the oldest forms of knowledge and knowing" and "action research provides opportunities to experiment with art as an integral part of the creation and dissemination of knowledge." From his 16 years' experience as an elementary classroom teacher, the author has found that young children are drawn to an arts-based approach of…

Powder metallurgy in aerospace research: A survey

NASA Technical Reports Server (NTRS)

Blakeslee, H. W.

1971-01-01

The various techniques by which powders can be produced, as pure metals or as alloys, are discussed; the methods by which these powders can be formed into the final parts are explained as well as further processing that may be necessary to meet specific requirements. The NASA developments are detailed, and references are provided for those who wish to obtain further information characteristic of any methodology.

"It's All Becoming a Habitus": Beyond the Habitual Use of Habitus in Educational Research

ERIC Educational Resources Information Center

Reay, Diane

2004-01-01

The concept of habitus lies at the heart of Bourdieu's theoretical framework. It is a complex concept that takes many shapes and forms in Bourdieu's own writing, even more so in the wider sociological work of other academics. In the first part of this paper I develop an understanding of habitus, based on Bourdieu's many writings on the concept,…

Brisk Attitude and Optimism: Top Workers' Childhood Experiences Forming the Basis of Success at Work

ERIC Educational Resources Information Center

Uusiautti, Satu; Määttä, Kaarina

2013-01-01

This study focused on the phenomenon of success at work asking whether it would be possible to find factors from top workers' children and school experiences that would explain their later success. This study was a part of a larger research in which Finnish top workers, employees of the year, who have been selected as successful professionals of…

"Complex Teaching Realities" and "Deep Rooted Cultural Traditions": Barriers to the Implementation and Internalisation of Formative Assessment in China

ERIC Educational Resources Information Center

Poole, Adam; Adamson, Bob

2016-01-01

This article forms the first part of an Action Research project designed to incorporate formative assessment into the culture of learning of a bilingual school in Shanghai, China. It synthesises the empirical literature on formative assessment in China to establish some of the difficulties that teachers have faced in trying to incorporate this…

Ecology of lynx in northern Canada and Alaska [Chapter 9

Treesearch

Garth Mowat; Kim G. Poole; Mark O' Donoghue

2000-01-01

We review the ecology of lynx in the northern part of its range, drawing heavily on the results of recent research from that region. Snowshoe hares form the bulk of prey items in essentially all studies and at all periods in the cycle, but use of alternative prey, often red squirrel, increases as hares become scarce. Caching of freshly killed prey is rare,...

Global Gene Expression Profiles Identify Metastasis Regulatory Networks | Center for Cancer Research

Cancer.gov

Metastasis is a systemic disease in which cancer cells break away from a tumor and migrate to other parts of the body, usually via the blood or lymphatic systems, to form new tumors. Metastatic tumors are difficult to treat and account for the majority of cancer-related deaths. Susceptibility to metastasis is known to have a genetic component, with some individuals more

Three dimensions of learning: experiential activity for engineering innovation education and research

NASA Astrophysics Data System (ADS)

Killen, Catherine P.

2015-09-01

This paper outlines a novel approach to engineering education research that provides three dimensions of learning through an experiential class activity. A simulated decision activity brought current research into the classroom, explored the effect of experiential activity on learning outcomes and contributed to the research on innovation decision making. The 'decision task' was undertaken by more than 480 engineering students. It increased their reported measures of learning and retention by an average of 0.66 on a five-point Likert scale, and revealed positive correlations between attention, enjoyment, ongoing interest and learning and retention. The study also contributed to innovation management research by revealing the influence of different data visualisation methods on decision quality, providing an example of research-integrated education that forms part of the research process. Such a dovetailing of different research studies demonstrates how engineering educators can enhance educational impact while multiplying the outcomes from their research efforts.

48 CFR 453.108 - Recommendations concerning forms.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Recommendations concerning... AND FORMS FORMS General 453.108 Recommendations concerning forms. Contracting officers shall submit recommendations for new forms or to revise, eliminate, or consolidate forms prescribed by FAR part 53 and part 453...

The Practicality of Statistical Physics Handout Based on KKNI and the Constructivist Approach

NASA Astrophysics Data System (ADS)

Sari, S. Y.; Afrizon, R.

2018-04-01

Statistical physics lecture shows that: 1) the performance of lecturers, social climate, students’ competence and soft skills needed at work are in enough category, 2) students feel difficulties in following the lectures of statistical physics because it is abstract, 3) 40.72% of students needs more understanding in the form of repetition, practice questions and structured tasks, and 4) the depth of statistical physics material needs to be improved gradually and structured. This indicates that learning materials in accordance of The Indonesian National Qualification Framework or Kerangka Kualifikasi Nasional Indonesia (KKNI) with the appropriate learning approach are needed to help lecturers and students in lectures. The author has designed statistical physics handouts which have very valid criteria (90.89%) according to expert judgment. In addition, the practical level of handouts designed also needs to be considered in order to be easy to use, interesting and efficient in lectures. The purpose of this research is to know the practical level of statistical physics handout based on KKNI and a constructivist approach. This research is a part of research and development with 4-D model developed by Thiagarajan. This research activity has reached part of development test at Development stage. Data collection took place by using a questionnaire distributed to lecturers and students. Data analysis using descriptive data analysis techniques in the form of percentage. The analysis of the questionnaire shows that the handout of statistical physics has very practical criteria. The conclusion of this study is statistical physics handouts based on the KKNI and constructivist approach have been practically used in lectures.

Method of forming and assembly of metal and ceramic parts

DOEpatents

Ripley, Edward B

2014-04-22

A method of forming and assembling at least two parts together that may be metal, ceramic, or a combination of metal and ceramic parts. Such parts may have different CTE. Individual parts that are formed and sintered from particles leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

2 CFR Appendix X to Part 200 - Data Collection Form (Form SF-SAC)

Code of Federal Regulations, 2014 CFR

2014-01-01

... 2 Grants and Agreements 1 2014-01-01 2014-01-01 false Data Collection Form (Form SF-SAC) X Appendix X to Part 200 Grants and Agreements Office of Management and Budget Guidance for Grants and... PRINCIPLES, AND AUDIT REQUIREMENTS FOR FEDERAL AWARDS Pt. 200, App. X Appendix X to Part 200—Data Collection...

"I understood…but some parts were confusing and hard to grasp": Patients' perception of informed consent forms and clinical trials in Eldoret, Kenya.

PubMed

Naanyu, Violet; Some, Fatma F; Siika, Abraham M

2014-01-01

A signed informed consent (IC) form proves voluntary participation in a study. Yet the development of accessible and understandable IC forms comes with its own set of challenges, particularly when conducting international research. This study explores understanding by participants in an Eldoret-based clinical trial of IC and its implications as well as whether they will volunteer for future trials. In mid-2010, in-depth interviews with trial participants were recorded in audio format. Content analysis provides a description of trial participants' experiences and thoughts. All participants were informed about the trial and its voluntariness and they consented. However, some were too ill to scrutinize trial details. Thus, they relied on their health care provider's advice, or on their guardians. In general, participants understood their role and were happy to volunteer or invite others to participate in future trials. They also emphasised the importance of an open on-going dialogue in order for participants to be able to ask questions. Clinical trial participants in Eldoret seem to understand their role, but rely on providers and guardians when consenting. They are very willing to participate in future trials. Evaluation of research participants' opinions may improve trial protocols, increase comprehension and guard against manipulation of study participants. In addition, this research focus should guide development of consent forms and process that facilitates a truly IC.

Commentary: Leveraging discovery science to advance child and adolescent psychiatric research--a commentary on Zhao and Castellanos 2016.

PubMed

Mennes, Maarten

2016-03-01

'Big Data' and 'Population Imaging' are becoming integral parts of inspiring research aimed at delineating the biological underpinnings of psychiatric disorders. The scientific strategies currently associated with big data and population imaging are typically embedded in so-called discovery science, thereby pointing to the hypothesis-generating rather than hypothesis-testing nature of discovery science. In this issue, Yihong Zhao and F. Xavier Castellanos provide a compelling overview of strategies for discovery science aimed at progressing our understanding of neuropsychiatric disorders. In particular, they focus on efforts in genetic and neuroimaging research, which, together with extended behavioural testing, form the main pillars of psychopathology research. © 2016 Association for Child and Adolescent Mental Health.

Improved Access to NSF Funded Ocean Research Data

NASA Astrophysics Data System (ADS)

Chandler, C. L.; Groman, R. C.; Kinkade, D.; Shepherd, A.; Rauch, S.; Allison, M. D.; Gegg, S. R.; Wiebe, P. H.; Glover, D. M.

2015-12-01

Data from NSF-funded, hypothesis-driven research comprise an essential part of the research results upon which we base our knowledge and improved understanding of the impacts of climate change. Initially funded in 2006, the Biological and Chemical Oceanography Data Management Office (BCO-DMO) works with marine scientists to ensure that data from NSF-funded ocean research programs are fully documented and freely available for future use. BCO-DMO works in partnership with information technology professionals, other marine data repositories and national data archive centers to ensure long-term preservation of these valuable environmental research data. Data contributed to BCO-DMO by the original investigators are enhanced with sufficient discipline-specific documentation and published in a variety of standards-compliant forms designed to enable discovery and support accurate re-use.

[Pioneering surgical innovations in Germany : Part 2: public funding and origins of surgical innovations].

PubMed

Weber, S; Haverich, A

2016-05-01

In recent years research that conforms with evidence-based medicine (EBM) has been demanded even in surgery. Uniform studies were carried out to prove the benefits of new procedures; however, compared to other research sectors, public third party funding for surgical research was significantly cut back. Collation of special features in surgery with respect to external funding of surgical top level research. Examination of the benefits of a continuous promotion and of organizations involved in research. Part one of this investigation presented the methods used to identify and analyze pioneering research in surgery. Out of a total of 15 revolutionary innovations only 3 projects were financed by external funding and 2 projects received indirect financial support as a result of a cooperation with the medical industry. This demonstrates that the majority of projects were neither directly nor indirectly subsidized. Apart from one instance the majority of innovations were generated by university hospitals highly active in research. In effect, the non-existing external funding for outstanding surgical innovations and hospitals suggests that a reformation of surgical research is required. To strengthen the quality of innovations in surgery a concentration of funding to institutions that are highly active in research makes sense. Institutional funding directly linked to a project should form a key component of support particularly in the early stages of development.

Readability and Understanding of Informed Consent Among Participants With Low Incomes: A Preliminary Report.

PubMed

Ittenbach, Richard F; Senft, Elizabeth C; Huang, Guixia; Corsmo, Jeremy J; Sieber, Joan E

2015-12-01

With passage and implementation of the Affordable Health Care Act, more vulnerable segments of the U.S. population will now have access to regular health care and increased opportunities to participate in biomedical research. Yet, access to new groups brings with it new responsibilities for investigators, most importantly, reducing burdens for participants. Data collected through this small pilot study suggest several preliminary but potentially important findings when working with adults from low-income populations: First, while all participants read some parts of the consent forms (55%), only a minority reported reading the entire form (45%); second, 73% of participants reported understanding the study very well whereas only 27% reported understanding the study "a little"; third, there was a slight reported advantage of the simplified form over the regular form; however, this difference varied by section. Relatedly, other research has shown a high incidence of persons reading none of the consent form, but signing a statement that they have read and understood the study. Why does this occur? What are we teaching people when we request that they sign a consent form they have chosen not to read? What are the ethical and regulatory implications? Embedded ethics studies such as this one, although pilot and preliminary in nature, offer a number of advantages, such as stimulating additional scientific inquiry as well as challenging established institutional practices. © The Author(s) 2015.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burge, S.W.

Erosion has been identified as one of the significant design issues in fluid beds. A cooperative R&D venture of industry, research, and government organizations was recently formed to meet the industry need for a better understanding of erosion in fluid beds. Research focussed on bed hydrodynamics, which are considered to be the primary erosion mechanism. As part of this work, ANL developed an analytical model (FLUFIX) for bed hydrodynamics. Partial validation was performed using data from experiments sponsored by the research consortium. Development of a three-dimensional fluid bed hydrodynamic model was part of Asea-Babcock`s in-kind contribution to the R&D venture.more » This model, FORCE2, was developed by Babcock & Wilcox`s Research and Development Division existing B&W program and on the gas-solids modeling and was based on an existing B&W program and on the gas-solids modeling technology developed by ANL and others. FORCE2 contains many of the features needed to model plant size beds and, therefore can be used along with the erosion technology to assess metal wastage in industrial equipment. As part of the development efforts, FORCE2 was partially validated using ANL`s two-dimensional model, FLUFIX, and experimental data. Time constraints as well as the lack of good hydrodynamic data, particularly at the plant scale, prohibited a complete validation of FORCE2. This report describes this initial validation of FORCE2.« less

Symposium 'methodology in medical education research' organised by the Methodology in Medical Education Research Committee of the German Society of Medical Education May, 25th to 26th 2013 at Charité, Berlin

PubMed Central

Schüttpelz-Brauns, Katrin; Kiessling, Claudia; Ahlers, Olaf; Hautz, Wolf E.

2015-01-01

In 2013, the Methodology in Medical Education Research Committee ran a symposium on “Research in Medical Education” as part of its ongoing faculty development activities. The symposium aimed to introduce to participants educational research methods with a specific focus on research in medical education. Thirty-five participants were able to choose from workshops covering qualitative methods, quantitative methods and scientific writing throughout the one and a half days. The symposium’s evaluation showed participant satisfaction with the format as well as suggestions for future improvement. Consequently, the committee will offer the symposium again in a modified form in proximity to the next annual Congress of the German Society of Medical Education. PMID:25699106

7 CFR 1710.2 - Definitions and rules of construction.

Code of Federal Regulations, 2010 CFR

2010-01-01

... as follows: EC16SE91.000 where: A=Distribution (plant), which equals Part E, Line 14(e) of RUS Form 7; B=General Plant, which equals Part E, Line 24(e) of RUS Form 7; C=Operating Revenue and Patronage Capital, which equals Part A, Line 1 of RUS Form 7; and D=Cost of Power, which equals the sum of Part A...

7 CFR 1710.2 - Definitions and rules of construction.

Code of Federal Regulations, 2013 CFR

2013-01-01

... as follows: EC16SE91.000 where: A=Distribution (plant), which equals Part E, Line 14(e) of RUS Form 7; B=General Plant, which equals Part E, Line 24(e) of RUS Form 7; C=Operating Revenue and Patronage Capital, which equals Part A, Line 1 of RUS Form 7; and D=Cost of Power, which equals the sum of Part A...

7 CFR 1710.2 - Definitions and rules of construction.

Code of Federal Regulations, 2011 CFR

2011-01-01

... as follows: EC16SE91.000 where: A=Distribution (plant), which equals Part E, Line 14(e) of RUS Form 7; B=General Plant, which equals Part E, Line 24(e) of RUS Form 7; C=Operating Revenue and Patronage Capital, which equals Part A, Line 1 of RUS Form 7; and D=Cost of Power, which equals the sum of Part A...

7 CFR 1710.2 - Definitions and rules of construction.

Code of Federal Regulations, 2012 CFR

2012-01-01

... as follows: EC16SE91.000 where: A=Distribution (plant), which equals Part E, Line 14(e) of RUS Form 7; B=General Plant, which equals Part E, Line 24(e) of RUS Form 7; C=Operating Revenue and Patronage Capital, which equals Part A, Line 1 of RUS Form 7; and D=Cost of Power, which equals the sum of Part A...

Building of nested components by a double-nozzle droplet deposition process

NASA Astrophysics Data System (ADS)

Li, SuLi; Wei, ZhengYing; Du, Jun; Zhao, Guangxi; Wang, Xin; Lu, BingHeng

2016-07-01

According to the nested components jointed with multiple parts,a double-nozzle droplet deposition process was put forward in this paper, and the experimental system was developed. Through the research on the properties of support materials and the process of double-nozzle droplet deposition, the linkage control of the metal droplet deposition and the support material extrusion was realized, and a nested component with complex construction was fabricated directly. Compared with the traditional forming processes, this double-nozzle deposition process has the advantages of short cycle, low cost and so on. It can provide an approach way to build the nested parts.

16 CFR Appendix B to Part 698 - Model Forms for Risk-Based Pricing and Credit Score Disclosure Exception Notices

Code of Federal Regulations, 2014 CFR

2014-01-01

... Credit Score Disclosure Exception Notices B Appendix B to Part 698 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT MODEL FORMS AND DISCLOSURES Pt. 698, App. B Appendix B to Part 698... set of circumstances as indicated by the title of that model form. 2. Model form B-1 is for use in...

49 CFR Appendix B to Part 1155 - Form Federal Register Notice

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 8 2014-10-01 2014-10-01 false Form Federal Register Notice B Appendix B to Part 1155 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION.... B Appendix B to Part 1155—Form Federal Register Notice Docket No. FD __ (Sub-No. __) Notice of...

49 CFR Appendix C to Part 580 - Separate Disclosure Form

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Separate Disclosure Form C Appendix C to Part 580... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ODOMETER DISCLOSURE REQUIREMENTS Pt. 580, App. C Appendix C to Part 580—Separate Disclosure Form Odometer Disclosure Statement Federal law (and State law...

System and method for 3D printing of aerogels

DOEpatents

Worsley, Marcus A.; Duoss, Eric; Kuntz, Joshua; Spadaccini, Christopher; Zhu, Cheng

2016-03-08

A method of forming an aerogel. The method may involve providing a graphene oxide powder and mixing the graphene oxide powder with a solution to form an ink. A 3D printing technique may be used to write the ink into a catalytic solution that is contained in a fluid containment member to form a wet part. The wet part may then be cured in a sealed container for a predetermined period of time at a predetermined temperature. The cured wet part may then be dried to form a finished aerogel part.

Evaluating healthcare information technology outside of academia: observations from the national resource center for healthcare information technology at the Agency for Healthcare Research and Quality.

PubMed

Poon, Eric G; Cusack, Caitlin M; McGowan, Julie J

2009-01-01

The National Resource Center for Health Information Technology (NRC) was formed in the fall of 2004 as part of the Agency for Healthcare Research and Quality (AHRQ) health IT portfolio to support its grantees. One of the core functions of the NRC was to assist grantees in their evaluation efforts of Health IT. This manuscript highlights some common challenges experienced by health IT project teams at nonacademic institutions, including inappropriately scoped and resourced evaluation efforts, inappropriate choice of metrics, inadequate planning for data collection and analysis, and lack of consideration of qualitative methodologies. Many of these challenges can be avoided or overcome. The strategies adopted by various AHRQ grantees and the lessons learned from their projects should become part of the toolset for current and future implementers of health IT as the nation moves rapidly towards its widespread adoption.

Comparing the use of health information/advice in Birmingham and Hull: a case study of digital health information delivered via the television.

PubMed

Nicholas, David; Huntington, Paul; Gunter, Barrie; Williams, Peter

2003-01-01

Postal questionnaire surveys were carried out with users of two digital interactive television (DiTV) providers of health content to investigate the use made of each service and the users' reactions to service content and its usefulness to them. The research indicated that health information on DiTV was used and, on the whole, rated favourably. There was some evidence also that such information might be used by some people as a substitute for going to the doctor, though information from their general practitioner (GP) or practice nurse still carries more weight for most people than any other health information source. This study forms part of an ongoing research project which has, as part of its aim, the task of identifying particular users with the information sources that may be most appropriate for them.

Analysis misconception of integers in microteaching activities

NASA Astrophysics Data System (ADS)

Setyawati, R. D.; Indiati, I.

2018-05-01

This study view to analyse student misconceptions on integers in microteaching activities. This research used qualitative research design. An integers test contained questions from eight main areas of integers. The Integers material test includes (a) converting the image into fractions, (b) examples of positive numbers including rational numbers, (c) operations in fractions, (d) sorting fractions from the largest to the smallest, and vice versa; e) equate denominator, (f) concept of ratio mark, (g) definition of fraction, and (h) difference between fractions and parts. The results indicated an integers concepts: (1) the students have not been able to define concepts well based on the classification of facts in organized part; (2) The correlational concept: students have not been able to combine interrelated events in the form of general principles; and (3) theoretical concepts: students have not been able to use concepts that facilitate in learning the facts or events in an organized system.

Introduction and historical perspective.

PubMed

Gunning, Peter

2008-01-01

Tropomyosin is a coiled coil dimer which forms a polymer along the major groove of the majority of actin filaments. It is therefore one of the two primary components of the actin filament. Our understanding of the biological function of tropomyosin has been driven almost entirely by its role in striated muscle. This reflects both its original discovery as part of the thin filament in skeletal muscle and its pivotal role in regulating muscle contraction. In contrast, its role in the function of the cytoskeleton of all cells has been poorly understood due, at least in part, to the technical challenge of deciphering the function of a large number of isoforms. This book has brought together many of the leading researchers who have defined the function of tropomyosin in both normal and pathological conditions. Each author brings their own perspective in a series of stand alone reviews of the areas of tropomyosin research they have played a major role in defining.

Francesco and masers

NASA Astrophysics Data System (ADS)

Menten, K. M.

Masers in general are signposts of interesting astronomical sources and phenomena. In particular, they are found in the immediate environment of young stellar objects. Abundant observational evidence suggests that H_2O masers arise in the outflows from such sources in their earliest evolutionary phases and are in fact powered by accretion. As such they are intimately connected with the core of Francesco Palla's science. And indeed, H_2O masers were at the start and an essential component of a highly successful research program initiated by Francesco, the identification and characterization of a significant sample of massive young stellar objects. An overview is given of the sustained H_2O maser research program conducted over many years with the Medicina 32-meter radio telescope, in which Francesco played a vital part. Last, but not least, with Steven Stahler, Francesco co-authored an excellent chapter on interstellar masers that formed a part of The Formation of Stars, their classic textbook of the field.

Application of BIM technology in green scientific research office building

NASA Astrophysics Data System (ADS)

Ni, Xin; Sun, Jianhua; Wang, Bo

2017-05-01

BIM technology as a kind of information technology, has been along with the advancement of building industrialization application in domestic building industry gradually. Based on reasonable construction BIM model, using BIM technology platform, through collaborative design tools can effectively improve the design efficiency and design quality. Vanda northwest engineering design and research institute co., LTD., the scientific research office building project in combination with the practical situation of engineering using BIM technology, formed in the BIM model combined with related information according to the energy energy model (BEM) and the application of BIM technology in construction management stage made exploration, and the direct experience and the achievements gained by the architectural design part made a summary.

What makes clinical labour different? The case of human guinea pigging.

PubMed

Różyńska, Joanna

2018-05-24

Each year thousands of individuals enrol in clinical trials as healthy volunteers to earn money. Some of them pursue research participation as a full-time or at least a part-time job. They call themselves professional or semiprofessional guinea pigs. The practice of paying healthy volunteers raises numerous ethical concerns. Different payment models have been discussed in literature. Dickert and Grady argue for a wage-payment model. This model gives research subjects a standardised hourly wage, and it is based on an assumption that research participation is morally indistinguishable from other forms of unskilled labour. In this paper, I will challenge this assumption. I will argue that human guinea pigging has particular characteristics which taken together make it significantly different from other forms of labour. (1) Participation in research is skill-independent. Healthy volunteers are valuable not because they are skilful persons, but because they are human bodies. (2) The role of research volunteers is mainly passive. They are not asked to produce goods or deliver services. They are paid for enduring unpleasant, painful and risky interventions performed by investigators. (3) Research volunteering involves inherent risks and uncertainties, and subjects have little or no control over their minimisation and materialisation. I conclude that participation in clinical research is a specific kind of activity. It is more like renting out one's body to strangers, than working. Thus, research participation should not be treated on par with other forms of employment. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

From Data Privacy to Location Privacy

NASA Astrophysics Data System (ADS)

Wang, Ting; Liu, Ling

Over the past decade, the research on data privacy has achieved considerable advancement in the following two aspects: First, a variety of privacy threat models and privacy principles have been proposed, aiming at providing sufficient protection against different types of inference attacks; Second, a plethora of algorithms and methods have been developed to implement the proposed privacy principles, while attempting to optimize the utility of the resulting data. The first part of the chapter presents an overview of data privacy research by taking a close examination at the achievements from the above two aspects, with the objective of pinpointing individual research efforts on the grand map of data privacy protection. As a special form of data privacy, location privacy possesses its unique characteristics. In the second part of the chapter, we examine the research challenges and opportunities of location privacy protection, in a perspective analogous to data privacy. Our discussion attempts to answer the following three questions: (1) Is it sufficient to apply the data privacy models and algorithms developed to date for protecting location privacy? (2) What is the current state of the research on location privacy? (3) What are the open issues and technical challenges that demand further investigation? Through answering these questions, we intend to provide a comprehensive review of the state of the art in location privacy research.

The MRI-Linear Accelerator Consortium: Evidence-Based Clinical Introduction of an Innovation in Radiation Oncology Connecting Researchers, Methodology, Data Collection, Quality Assurance, and Technical Development.

PubMed

Kerkmeijer, Linda G W; Fuller, Clifton D; Verkooijen, Helena M; Verheij, Marcel; Choudhury, Ananya; Harrington, Kevin J; Schultz, Chris; Sahgal, Arjun; Frank, Steven J; Goldwein, Joel; Brown, Kevin J; Minsky, Bruce D; van Vulpen, Marco

2016-01-01

An international research consortium has been formed to facilitate evidence-based introduction of MR-guided radiotherapy (MR-linac) and to address how the MR-linac could be used to achieve an optimized radiation treatment approach to improve patients' survival, local, and regional tumor control and quality of life. The present paper describes the organizational structure of the clinical part of the MR-linac consortium. Furthermore, it elucidates why collaboration on this large project is necessary, and how a central data registry program will be implemented.

A power transformer as a source of noise.

PubMed

Zawieska, Wiktor Marek

2007-01-01

This article presents selected results of analyses and simulations carried out as part of research performed at the Central Institute of Labor Protection - the National Research Institute (CIOP-PIB) in connection with the development of a system for active reduction of noise emitted by high power electricity transformers. This analysis covers the transformer as a source of noise as well as a mathematical description of the phenomenon of radiation of vibroacoustic energy through a transformer enclosure modeled as a vibrating rectangular plate. Also described is an acoustic model of the transformer in the form of an array of loudspeakers.

Surface Science and the Advancement of Direct Olefin Epoxidation A Perspective on the Article, ‘‘Partial Oxidation of Higher Olefins on Ag(111) and Ag(110): Conversion of Styrene to Styrene Oxide, Benzene, and Benzoic Acid’’, by Andreas Klust and Robert J. Madix.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barteau, Mark A.

2006-10-04

The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. Few reactions are as conceptually simple or as devilishly difficult as the epoxidation of ethylene to form ethylene oxide:

Wood evidence : proper collection, documentation, and storage of wood evidence from a crime scene

Treesearch

Alex Wiedenhoeft

2006-01-01

Wood can be found at crime scenes in many forms: as a murder weapon, as material used to hide a body, or as trace evidence from forced entry or vandalism. In the course of my work at the Forest Products Laboratory, Center for Wood Anatomy Research, I have been part of several forensic investigations that were adversely affected by inappropriate procedures used to...

Mathematics Teachers' Use of Questions: Is There a Change of Practice after the Curriculum Change?

ERIC Educational Resources Information Center

Delice, Ali; Aydin, Emin; Cevik, K. Seda

2013-01-01

The aim of this study is to investigate the questions that are used by teachers. In broader sense the intention is to focus on questions as part of teachers' formal as well as informal assessments. We will mainly concentrate on how students are assessed and how the questions in the assessments are formed and marked. The research is mainly…

Novel Artificial Natural Products Against Breast Cancer Through Combinatorial Biosynthesis

DTIC Science & Technology

2002-07-01

compounds normally produced by a certain strain. Our investigations on the discovery of novel natural metabolites using type II polyketide synthase ...limitations, shall be included on any reproduction hereof which includes any part of the portions subject to such limitations. THIS TECHNICAL REPORT HAS... polyketides remain the central group of natural products in this research area, since this class of natural products form one of the largest and most

New study tests the safety and efficacy of combination therapy in adults with astrocytoma and glioblastoma | Center for Cancer Research

Cancer.gov

A two-part clinical trial of a multikinase inhibitor plus chemotherapy in patients with two types of brain tumors is enrolling in Bethesda, MD. The study will be open to patients with anaplastic astrocytoma, an uncommon malignant brain tumor that develops from star-shaped brain cells called astrocytes and glioblastoma, the most common and aggressive form of astrocytoma. Learn

Effective and Inclusive Schools? Attention to Diversity in Highly Effective Schools in the Autonomous Region of the Basque Country

ERIC Educational Resources Information Center

Intxausti, Nahia; Etxeberria, Feli; Bartau, Isabel

2017-01-01

This paper forms part of a research project that aims to characterise best practices in highly effective schools in the Autonomous Region of the Basque Country (ARBC). The aim is for the best practices identified to serve as points of reference when designing improvement plans to be implemented in all schools in the ARBC, with the advice and…

Attacking Urban Poverty: The Role of the SNDT Women's University, Mumbai, India--The "Gilbert Hill Programme". Strategies of Education and Training for Disadvantaged Groups.

ERIC Educational Resources Information Center

Kamath, M.; Udipi, S. A.; Varghese, M. A.

This study examined the role of the SNDT (formerly Shreemati Nathibai Damodar Thackersey) University in reducing poverty in the Gilbert Hill-Gamdevi Dongri area of Mumbai, India. The Gilbert Hill area accommodates around 1 million people, most of whom are migrants form other parts of India. The Department of Post-Graduate Studies and Research in…

How the eastern US National Forests were formed [Book review

Treesearch

Louis R. Iverson

2014-01-01

As a landscape ecologist conducting research on eastern forests for the US Forest Service (e.g., www.nrs.fs.fed.us/atlas), I was eager to learn about how the eastern National Forests came to be, as these forests now play such an important part of the natural world and provide a large carbon sink. The book did not disappoint and I'm confident that it will be...

Finite element analysis of composite beam-to-column connection with cold-formed steel section

NASA Astrophysics Data System (ADS)

Firdaus, Muhammad; Saggaff, Anis; Tahir, Mahmood Md

2017-11-01

Cold-formed steel (CFS) sections are well known due to its lightweight and high structural performance which is very popular for building construction. Conventionally, they are used as purlins and side rails in the building envelopes of the industrial buildings. Recent research development on cold-formed steel has shown that the usage is expanded to the use in composite construction. This paper presents the modelling of the proposed composite connection of beam-to-column connection where cold-formed steel of lipped steel section is positioned back-to-back to perform as beam. Reinforcement bars is used to perform the composite action anchoring to the column and part of it is embedded into a slab. The results of the finite element and numerical analysis has showed good agreement. The results show that the proposed composite connection contributes to significant increase to the moment capacity.

Board Game in Physics Classes—a Proposal for a New Method of Student Assessment

NASA Astrophysics Data System (ADS)

Dziob, Daniel

2018-03-01

The aim of this study was to examine the impact of assessing students' achievements in a physics course in the form of a group board game. Research was conducted in two groups of 131 high school students in Poland. In each school, the research sample was divided into experimental and control groups. Each group was taught by the same teacher and participated in the same courses and tests before the game. Just after finishing the course on waves and vibrations (school 1) and optics (school 2), experimental groups took part in a group board game to assess their knowledge. One week after the game, the experimental and control groups (not involved in the game) took part in the post-tests. Students from the experimental groups performed better in the game than in the tests given before the game. As well their results in the post-tests were significantly higher statistically than students from the control groups. Simultaneously, student's opinions in the experimental groups about the board game as an assessment method were collected in an open-descriptive form and in a short questionnaire, and analyzed. Results showed that students experienced a positive attitude toward the assessment method, a reduction of test anxiety and an increase in their motivation for learning.

12 CFR Appendix C to Part 571 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 6 2014-01-01 2012-01-01 true Model Forms for Opt-Out Notices C Appendix C to... REPORTING Pt. 571, App. C Appendix C to Part 571—Model Forms for Opt-Out Notices a. Although use of the... comply with § 571.23(a)(2) of this part. C-1Model Form for Initial Opt-out Notice (Single-Affiliate...

12 CFR Appendix C to Part 571 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 5 2011-01-01 2011-01-01 false Model Forms for Opt-Out Notices C Appendix C to... REPORTING Pt. 571, App. C Appendix C to Part 571—Model Forms for Opt-Out Notices a. Although use of the... comply with § 571.23(a)(2) of this part. C-1Model Form for Initial Opt-out Notice (Single-Affiliate...

12 CFR Appendix C to Part 717 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 7 2013-01-01 2013-01-01 false Model Forms for Opt-Out Notices C Appendix C to... FAIR CREDIT REPORTING Pt. 717, App. C Appendix C to Part 717—Model Forms for Opt-Out Notices a... the treatment of opt-outs by joint consumers to comply with § 717.23(a)(2) of this part. C-1Model Form...

12 CFR Appendix C to Part 571 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 6 2013-01-01 2012-01-01 true Model Forms for Opt-Out Notices C Appendix C to... REPORTING Pt. 571, App. C Appendix C to Part 571—Model Forms for Opt-Out Notices a. Although use of the... comply with § 571.23(a)(2) of this part. C-1Model Form for Initial Opt-out Notice (Single-Affiliate...

12 CFR Appendix C to Part 41 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Model Forms for Opt-Out Notices C Appendix C to... Pt. 41, App. C Appendix C to Part 41—Model Forms for Opt-Out Notices a. Although use of the model... comply with § 41.23(a)(2) of this part. C-1 Model Form for Initial Opt-out Notice (Single-Affiliate...

12 CFR Appendix C to Part 222 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 3 2011-01-01 2011-01-01 false Model Forms for Opt-Out Notices C Appendix C to... SYSTEM FAIR CREDIT REPORTING (REGULATION V) Pt. 222, App. C Appendix C to Part 222—Model Forms for Opt... of opt-outs by joint consumers to comply with § 222.23(a)(2) of this part. C-1Model Form for Initial...

12 CFR Appendix C to Part 717 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Model Forms for Opt-Out Notices C Appendix C to... FAIR CREDIT REPORTING Pt. 717, App. C Appendix C to Part 717—Model Forms for Opt-Out Notices a... the treatment of opt-outs by joint consumers to comply with § 717.23(a)(2) of this part. C-1Model Form...

12 CFR Appendix C to Part 41 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Model Forms for Opt-Out Notices C Appendix C to... Pt. 41, App. C Appendix C to Part 41—Model Forms for Opt-Out Notices a. Although use of the model... comply with § 41.23(a)(2) of this part. C-1 Model Form for Initial Opt-out Notice (Single-Affiliate...

27 CFR 46.22 - Forms prescribed.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CIGARETTE PAPERS AND TUBES Administrative Provisions § 46.22 Forms prescribed. (a) The appropriate TTB officer is authorized to prescribe all forms required by this part. You must furnish all of the..., and as required by this part. You must file each form in accordance with its instructions. (b) Forms...

Traditional use of medicinal plants by the Jaintia tribes in North Cachar Hills district of Assam, northeast India

PubMed Central

Sajem, Albert L; Gosai, Kuldip

2006-01-01

The study of ethnobotany relating to any tribe is in itself a very intricate or convoluted process. This paper documents the traditional knowledge of medicinal plants that are in use by the indigenous Jaintia tribes residing in few isolated pockets of northeast India. The present study was done through structured questionnaires in consultations with the tribal practitioners and has resulted in the documentation of 39 medicinal plant species belonging to 27 families and 35 genera. For curing diverse form of ailments, the use of aboveground plant parts was higher (76.59%) than the underground plant parts (23.41%). Of the aboveground plant parts, leaf was used in the majority of cases (23 species), followed by fruit (4). Different underground plant forms such as root, tuber, rhizome, bulb and pseudo-bulb were also found to be in use by the Jaintia tribe as a medicine. Altogether, 30 types of ailments have been reported to be cured by using these 39 medicinal plant species. The study thus underlines the potentials of the ethnobotanical research and the need for the documentation of traditional ecological knowledge pertaining to the medicinal plant utilization for the greater benefit of mankind. PMID:16899114

Retrospective access to data: the ENGAGE consent experience

PubMed Central

Tassé, Anne Marie; Budin-Ljøsne, Isabelle; Knoppers, Bartha Maria; Harris, Jennifer R

2010-01-01

The rapid emergence of large-scale genetic databases raises issues at the nexus of medical law and ethics, as well as the need, at both national and international levels, for an appropriate and effective framework for their governance. This is even more so for retrospective access to data for secondary uses, wherein the original consent did not foresee such use. The first part of this paper provides a brief historical overview of the ethical and legal frameworks governing consent issues in biobanking generally, before turning to the secondary use of retrospective data in epidemiological biobanks. Such use raises particularly complex issues when (1) the original consent provided is restricted; (2) the minor research subject reaches legal age; (3) the research subject dies; or (4) samples and data were obtained during medical care. Our analysis demonstrates the inconclusive, and even contradictory, nature of guidelines and confirms the current lack of compatible regulations. The second part of this paper uses the European Network for Genetic and Genomic Epidemiology (ENGAGE Consortium) as a case study to illustrate the challenges of research using previously collected data sets in Europe. Our study of 52 ENGAGE consent forms and information documents shows that a broad range of mechanisms were developed to enable secondary use of the data that are part of the ENGAGE Consortium. PMID:20332813

Retrospective access to data: the ENGAGE consent experience.

PubMed

Tassé, Anne Marie; Budin-Ljøsne, Isabelle; Knoppers, Bartha Maria; Harris, Jennifer R

2010-07-01

The rapid emergence of large-scale genetic databases raises issues at the nexus of medical law and ethics, as well as the need, at both national and international levels, for an appropriate and effective framework for their governance. This is even more so for retrospective access to data for secondary uses, wherein the original consent did not foresee such use. The first part of this paper provides a brief historical overview of the ethical and legal frameworks governing consent issues in biobanking generally, before turning to the secondary use of retrospective data in epidemiological biobanks. Such use raises particularly complex issues when (1) the original consent provided is restricted; (2) the minor research subject reaches legal age; (3) the research subject dies; or (4) samples and data were obtained during medical care. Our analysis demonstrates the inconclusive, and even contradictory, nature of guidelines and confirms the current lack of compatible regulations. The second part of this paper uses the European Network for Genetic and Genomic Epidemiology (ENGAGE Consortium) as a case study to illustrate the challenges of research using previously collected data sets in Europe. Our study of 52 ENGAGE consent forms and information documents shows that a broad range of mechanisms were developed to enable secondary use of the data that are part of the ENGAGE Consortium.

Tailoring Summer Research Experiences to Diverse Student Cohorts: Lessons Learned from Teaching Scientific Communication to Summer Interns

NASA Astrophysics Data System (ADS)

Batchelor, R. L.; Haacker, R.

2014-12-01

Scientific posters, presentations and papers are frequently assigned outputs for students participating in summer research experiences, yet previous exposure to any form of scientific communication is not a given. Providing training in scientific communication in some form is thus a necessity for many internship programs, especially those aimed towards academically younger students. In this presentation, we will share some of the experiences we've gained from teaching scientific communication workshops to summer interns who range from high school to graduate school. Building on the many years of experience learned through the Significant Opportunities in Atmospheric Research Science (SOARS) program, course material has been adapted and tailored to students participating in the National Center for Atmospheric Research High-School Internship Research Opportunity (HIRO, now the NCAR PreCollege Internship) and Research Experiences for Community College Students (RECCS, based with Colorado University's Cooperative Institute for Research in Environmental Science). SOARS also has experience supporting graduate students towards publication. Weekly communications workshops have served not only to provide necessary scientific skills, but also as a place to gather, reflect, discuss and build community. The unique opportunities and challenges in working with each of these groups will be discussed as part of the larger community discussion of how we can increase diversity in STEM through providing genuine research experiences to diverse and academically young students.

17 CFR Appendix to Part 48 - Form FBOT

Code of Federal Regulations, 2014 CFR

2014-04-01

... BOARDS OF TRADE Pt. 48, App. Appendix to Part 48—Form FBOT COMMODITY FUTURES TRADING COMMISSION FORM FBOT FOREIGN BOARD OF TRADE APPLICATION FOR REGISTRATION (IN ORDER TO PERMIT DIRECT ACCESS TO MEMBERS AND OTHER... foreign board of trade applying for registration pursuant to CEA section 4(b) and part 48 of the...

49 CFR Appendix B to Part 24 - Statistical Report Form

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Statistical Report Form B Appendix B to Part 24... ACQUISITION FOR FEDERAL AND FEDERALLY-ASSISTED PROGRAMS Pt. 24, App. B Appendix B to Part 24—Statistical Report Form This Appendix sets forth the statistical information collected from Agencies in accordance...

Numerical analysis of the flexible roll forming of an automotive component from high strength steel

NASA Astrophysics Data System (ADS)

Abeyrathna, B.; Abvabi, A.; Rolfe, B.; Taube, R.; Weiss, M.

2016-11-01

Conventional roll forming is limited to components with uniform cross-section; the recently developed flexible roll forming (FRF) process can be used to form components which vary in both width and depth. It has been suggested that this process can be used to manufacture automotive components from Ultra High Strength Steel (UHSS) which has limited tensile elongation. In the flexible roll forming process, the pre-cut blank is fed through a set of rolls; some rolls are computer-numerically controlled (CNC) to follow the 3D contours of the part and hence parts with a variable cross-section can be produced. This paper introduces a new flexible roll forming technique which can be used to form a complex shape with the minimum tooling requirements. In this method, the pre-cut blank is held between two dies and the whole system moves back and forth past CNC forming rolls. The forming roll changes its angle and position in each pass to incrementally form the part. In this work, the process is simulated using the commercial software package Copra FEA. The distribution of total strain and final part quality are investigated as well as related shape defects observed in the process. Different tooling concepts are used to improve the strain distribution and hence the part quality.

Welcome to Surface Topography: Metrology and Properties

NASA Astrophysics Data System (ADS)

Leach, Richard

2013-11-01

I am delighted to welcome readers to this inaugural issue of Surface Topography: Metrology and Properties (STMP). In these days of citation indexes and academic reviews, it is a tough, and maybe a brave, job to start a new journal. But the subject area has never been more active and we are seeing genuine breakthroughs in the use of surfaces to control functional performance. Most manufactured parts rely on some form of control of their surface characteristics. The surface is usually defined as that feature on a component or device, which interacts with either the environment in which it is housed (or in which the device operates), or with another surface. The surface topography and material characteristics of a part can affect how fluids interact with it, how the part looks and feels and how two bearing parts will slide together. The need to control, and hence measure, surface features is becoming increasingly important as we move into a miniaturized world. Surface features can become the dominant functional features of a part and may become large in comparison to the overall size of an object. Research into surface texture measurement and characterization has been carried out for over a century and is now more active than ever, especially as new areal surface texture specification standards begin to be introduced. The range of disciplines for which the function of a surface relates to its topography is very diverse; from metal sheet manufacturing to art restoration, from plastic electronics to forensics. Until now, there has been no obvious publishing venue to bring together all these applications with the underlying research and theory, or to unite those working in academia with engineering and industry. Hence the creation of Surface Topography: Metrology and Properties . STMP will publish the best work being done across this broad discipline in one journal, helping researchers to share common themes and highlighting and promoting the extraordinary benefits this field yields across an array of applications in the modern world. To this end, we have gathered leading experts from across our scope to form our inaugural editorial board. Their broad subject knowledge and experience will help to guide the journal and ensure we meet our goal of high-quality research, published quickly, across the breadth of the subject. We are committed to providing a rapid and yet rigorous peer review process. As a launch promotion, all STMP's published content will be free to readers during 2013. The editorial board and I hope you will be as excited by the possibilities of this new journal as we are, and that you will choose to both submit your research and read STMP in the months and years to come. We look forward to reading your papers!

Process development and tooling design for intrinsic hybrid composites

NASA Astrophysics Data System (ADS)

Riemer, M.; Müller, R.; Drossel, W. G.; Landgrebe, D.

2017-09-01

Hybrid parts, which combine the advantages of different material classes, are moving into the focus of lightweight applications. This development is amplified by their high potential for usage in the field of crash relevant structures. By the current state of the art, hybrid parts are mainly made in separate, subsequent forming and joining processes. By using the concept of an intrinsic hybrid, the shaping of the part and the joining of the different materials are performed in a single process step for shortening the overall processing time and thereby the manufacturing costs. The investigated hybrid part is made from continuous fibre reinforced plastic (FRP), in which a metallic reinforcement structure is integrated. The connection between these layered components is realized by a combination of adhesive bonding and a geometrical form fit. The form fit elements are intrinsically generated during the forming process. This contribution regards the development of the forming process and the design of the forming tool for the single step production of a hybrid part. To this end a forming tool, which combines the thermo-forming and the metal forming process, is developed. The main challenge by designing the tool is the temperature management of the tool elements for the variothermal forming process. The process parameters are determined in basic tests and finite element (FE) simulation studies. On the basis of these investigations a control concept for the steering of the motion axes and the tool temperature is developed. Forming tests are carried out with the developed tool and the manufactured parts are analysed by computer assisted tomography (CT) scans.

32 CFR Appendix A to Part 45 - DD Form 214

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false DD Form 214 A Appendix A to Part 45 National... CERTIFICATE OF RELEASE OR DISCHARGE FROM ACTIVE DUTY (DD FORM 214/5 SERIES) Pt. 45, App. A Appendix A to Part 45—DD Form 214 EC23OC91.003 EC23OC91.004 EC23OC91.005 EC23OC91.006 [54 FR 9985, Mar. 9, 1989] ...

Gum and deposit formation in diesel fuels. Final report, 1984-1988

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayo, F.R.; Mill, T.

1988-05-15

The authors examined two aspects of the stability of diesel fuels in storage: the formation of sediments in suspension, which subsequently clog filters, and the formation of soluble gum, which passes the filters but then forms hard deposits on hot engine parts. Research on fuel stability at SRI during the last 6 years has shown that soluble gum appears first on storage, and then part of it grows into sediment. If the oxidation mixture is agitated gently, the precipitating gum grows on the surface gum, and no loose sediment is formed. Three mechanisms of gum formation were distinguished: (1) amore » process intimately associated with chain propagation and termination during oxidation, (2) a coupling of fuel molecules by decomposing peroxides in the absence of oxygen, and (3) a condensation of naphthols and aldehydes from the oxidation of alkylnaphthalenes. The polymeric oxidation products from a JP-8 fuel are shown to be largely responsible for deposits in the Jet Fuel Thermal Oxidation Tester (JFTOT).« less

Near-Net-Shape Processing of Sintered Fibrous Ceramics Achieved

NASA Technical Reports Server (NTRS)

Angel, Paul W.

2000-01-01

A variety of sintered fibrous ceramic (SFC) materials have been developed over the last 50 years as thermal barrier materials for reentry applications. SFC materials typically exhibit very low thermal conductivities combined with low densities and good thermal stability up to 2500 F. These materials have flown successfully on the space shuttle orbiters since the 1960's. More recently, the McDonnell Douglas Corporation successfully used SFC tiles as a heat shield on the underside of its DC X test vehicle. For both of these applications, tiles are machined from blocks of a specific type of SFC called an alumina-enhanced thermal barrier (AETB). The sizes of these blocks have been limited by the manufacturing process. In addition, as much as 80 to 90 percent of the material can be lost during the machining of tiles with significant amounts of curvature. To address these problems, the NASA Glenn Research Center at Lewis Field entered a cooperative contract with the Boeing Company to develop a vacuum-assisted forming process that can produce large (approximately 4 square feet), severely contoured panels of AETB while saving costs in comparison to the conventional cast-and-machine billet process. For shuttle use, AETB is slurry cast, drained, and fired to form square billets conforming to the shape of the filtration box. The billets are then cut into tiles of the appropriate size for thermally protecting the space shuttle. Processing techniques have limited the maximum size of AETB billets to 21.5 square inches by 6.5-in. thick, but the space shuttles use discrete heat shield tiles no more than 8 to 12 square inches. However, in other applications, large, complex shapes are needed, and the tiling approach is undesirable. For such applications, vacuum-assisted forming can produce large parts with complex shapes while reducing machining waste and eliminating cemented joints between bonded billets. Because it allows contoured shapes to be formed, material utilization is inherently high. Initial estimates show that the amount of material lost during machining can be reduced by 50 percent or more. In addition, a fiber alignment favorable for minimum heat transfer is maintained for all panel shapes since the fibers are aligned parallel to the contoured surface of the forming tool or mold. The vacuum-assisted forming process can complete the entire forming operation in a matter of minutes and can produce multiple parts whose size is limited only by the size of the forming tool. To date, panels as large as 2 square feet have been demonstrated The vacuum-assisted forming process starts with the fabrication of a permeable forming tool, or mold, with the proper part contour. This reusable tool is mounted over an internal rib support structure, as depicted in the diagram, such that a vacuum can be pulled on the bottom portion of the tool. AETB slurry is then poured over and around the tool, liquid is drawn from the slurry, and the part forms over the tool surface. The part is then dried, fired, and finished machined. Future plans include an evaluation of the need for additional coatings and surface-toughness treatments to extend the durability and performance of this material.

Summaries of BFRL fire research in-house projects and grants, 1993

NASA Astrophysics Data System (ADS)

Jason, Nora H.

1993-09-01

The report describes the fire research projects performed in the Building and Fire Research Laboratory (BFRL) and under its extramural grants program during fiscal year 1993. The BFRL Fire Research Program has directed its efforts under three program thrusts. The in-house priority projects, grants, and externally-funded efforts thus form an integrated, focussed ensemble. The publication is organized along those lines: fire risk and hazard prediction - carbon monoxide prediction, turbulent combustion, soot, engineering analysis, fire hazard assessment, and large fires; fire safety of products and materials - materials combustion, furniture flammability, and wall and ceiling fires; and advanced technologies for fire sensing and control - fire detection and fire suppression. For the convenience of the reader, an alphabetical listing of all grants is contained in Part 2.0.

EU Funded Research Activities on NPPS Operational Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manolatos, P.; Van Goethem, G.

2002-07-01

The 5. framework programme (FP-5), the pluri-annual research programme of the European Union (EU), covers the period 1998-2002. Research on nuclear energy, fusion and fission, is covered by the EURATOM part of the FP-5. An overview of the Euratom's research on Nuclear Reactor Safety, managed by the DG-RTD of the European Commission (EC), is presented. This concerns 70 multi-partner projects of approximately euro 82.5 million total contract value that have been selected and co-financed during the period 1999-2001. They form the three clusters of projects dealing with the 'Operational Safety of Existing Installations'. 'Plant Life Extension and Management' (PLEM), 'Severemore » Accident Management' (SAM) and 'Evolutionary concepts' (EVOL). Emphasis is given here to the projects of the PLEM cluster. (authors)« less

Friction Spinning—New Innovative Tool Systems For The Production of Complex Functionally Graded Workpieces

NASA Astrophysics Data System (ADS)

Homberg, Werner; Hornjak, Daniel

2011-05-01

Friction spinning is a new innovative and promising incremental forming technology implying high potential regarding the manufacturing of complex functionally graded workpieces and enhancing existing forming limits of conventional metal spinning processes. The friction spinning process is based on the integration of thermo-mechanical friction subprocesses in this incremental forming process. By choosing the appropriate process parameters, e.g. axial feed rate or relative motion, the contact conditions between tool and workpiece can be influenced in a defined way and, thus, a required temperature profile can be obtained. Friction spinning allows the extension of forming limits compared to conventional metal spinning in order to produce multifunctional components with locally varying properties and the manufacturing of e.g. complex hollow parts made of tubes, profiles, or sheet metals. In this way, it meets the demands regarding efficiency and the manufacturing of functionally graded lightweight components. There is e.g. the possibility of locally increasing the wall thickness in joining zones and, as a consequence, achieving higher quality of the joint at decreased expense. These products are not or only hardly producible by conventional processes so far. In order to benefit from the advantages and potentials of this new innovative process new tooling systems and concepts are indispensable which fulfill the special requirements of this thermo-mechanical process concerning thermal and tribological loads and which allow simultaneous and defined forming and friction operations. An important goal of the corresponding research work at the Chair of Forming and Machining Technology at the University of Paderborn is the development of tool systems that allow the manufacturing of such complex parts by simple uniaxial or sequential biaxial linear tool paths. In the paper, promising tool systems and geometries as well as results of theoretical and experimental research work (e.g. regarding the influence and interaction of process parameters on the workpiece quality) will be discussed. Furthermore, possibilities regarding the manufacturing of geometries (demonstrator workpieces) which are not or only hardly producible with conventional processes will be presented.

32 CFR Appendix A to Part 77 - DD Form 2580, Operation Transition Department of Defense

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 1 2011-07-01 2011-07-01 false DD Form 2580, Operation Transition Department of Defense A Appendix A to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE... to Part 77—DD Form 2580, Operation Transition Department of Defense Outplacement and Referral System...

32 CFR Appendix A to Part 77 - DD Form 2580, Operation Transition Department of Defense

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false DD Form 2580, Operation Transition Department of Defense A Appendix A to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE... to Part 77—DD Form 2580, Operation Transition Department of Defense Outplacement and Referral System...

32 CFR Appendix A to Part 77 - DD Form 2580, Operation Transition Department of Defense

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 1 2012-07-01 2012-07-01 false DD Form 2580, Operation Transition Department of Defense A Appendix A to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE... to Part 77—DD Form 2580, Operation Transition Department of Defense Outplacement and Referral System...

32 CFR Appendix A to Part 77 - DD Form 2580, Operation Transition Department of Defense

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false DD Form 2580, Operation Transition Department of Defense A Appendix A to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE... to Part 77—DD Form 2580, Operation Transition Department of Defense Outplacement and Referral System...

32 CFR Appendix A to Part 77 - DD Form 2580, Operation Transition Department of Defense

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 1 2014-07-01 2014-07-01 false DD Form 2580, Operation Transition Department of Defense A Appendix A to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE... to Part 77—DD Form 2580, Operation Transition Department of Defense Outplacement and Referral System...

6 CFR Appendix B to Part 9 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2010 CFR

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Disclosure Form To Report Lobbying B Appendix B to Part 9 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY RESTRICTIONS UPON LOBBYING Pt. 9, App. B Appendix B to Part 9—Disclosure Form To Report Lobbying ER06MR03.021...

13 CFR Appendix B to Part 146 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Disclosure Form To Report Lobbying B Appendix B to Part 146 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW RESTRICTIONS ON LOBBYING Pt. 146, App. B Appendix B to Part 146—Disclosure Form To Report Lobbying EC08SE91.000...

41 CFR Appendix B to Part 105 - 69-Disclosure Form To Report Lobbying

Code of Federal Regulations, 2013 CFR

2013-07-01

... 41 Public Contracts and Property Management 3 2013-07-01 2013-07-01 false 69-Disclosure Form To Report Lobbying B Appendix B to Part 105 Public Contracts and Property Management Federal Property... Administration 69-NEW RESTRICTIONS ON LOBBYING Pt. 105-69, App. B Appendix B to Part 105-69—Disclosure Form To...

22 CFR Appendix B to Part 712 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 2 2014-04-01 2014-04-01 false Disclosure Form To Report Lobbying B Appendix B to Part 712 Foreign Relations OVERSEAS PRIVATE INVESTMENT CORPORATION ADMINISTRATIVE PROVISIONS NEW RESTRICTIONS ON LOBBYING Pt. 712, App. B Appendix B to Part 712—Disclosure Form To Report Lobbying EC13OC91.006...

40 CFR Appendix B to Part 34 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Disclosure Form To Report Lobbying B Appendix B to Part 34 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE NEW RESTRICTIONS ON LOBBYING Pt. 34, App. B Appendix B to Part 34—Disclosure Form To Report...

45 CFR Appendix B to Part 604 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 3 2014-10-01 2014-10-01 false Disclosure Form To Report Lobbying B Appendix B to Part 604 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION NEW RESTRICTIONS ON LOBBYING Pt. 604, App. B Appendix B to Part 604—Disclosure Form To Report Lobbying...

12 CFR Appendix B to Part 37 - Long Form Disclosures

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Long Form Disclosures B Appendix B to Part 37 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY DEBT CANCELLATION CONTRACTS AND DEBT SUSPENSION AGREEMENTS Pt. 37, App. B Appendix B to Part 37—Long Form Disclosures • This...

13 CFR Appendix B to Part 146 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2012 CFR

2012-01-01

... 13 Business Credit and Assistance 1 2012-01-01 2012-01-01 false Disclosure Form To Report Lobbying B Appendix B to Part 146 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW RESTRICTIONS ON LOBBYING Pt. 146, App. B Appendix B to Part 146—Disclosure Form To Report Lobbying EC08SE91.000...

40 CFR Appendix B to Part 34 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Disclosure Form To Report Lobbying B Appendix B to Part 34 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE NEW RESTRICTIONS ON LOBBYING Pt. 34, App. B Appendix B to Part 34—Disclosure Form To Report...

43 CFR 428.4 - Who must submit forms under this part.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Who must submit forms under this part. 428.4 Section 428.4 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION... THE ELIGIBILITY OF CERTAIN FORMERLY EXCESS LAND § 428.4 Who must submit forms under this part. (a) You...

32 CFR Appendix C to Part 45 - DD Form 215

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false DD Form 215 C Appendix C to Part 45 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE PERSONNEL, MILITARY AND CIVILIAN CERTIFICATE OF RELEASE OR DISCHARGE FROM ACTIVE DUTY (DD FORM 214/5 SERIES) Pt. 45, App. C Appendix C to Part...

24 CFR Appendix C to Part 3500 - Instructions for Completing Good Faith Estimate (GFE) Form

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Instructions for Completing Good Faith Estimate (GFE) Form C Appendix C to Part 3500 Housing and Urban Development Regulations Relating.... 3500, App. C Appendix C to Part 3500—Instructions for Completing Good Faith Estimate (GFE) Form The...

20 CFR Appendix B to Part 438 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Disclosure Form To Report Lobbying B Appendix B to Part 438 Employees' Benefits SOCIAL SECURITY ADMINISTRATION RESTRICTIONS ON LOBBYING Pt. 438, App. B Appendix B to Part 438—Disclosure Form To Report Lobbying ER27MY03.000 ER27MY03.001 ...

Post-approval monitoring and oversight of U.S.-initiated human subjects research in resource-constrained countries.

PubMed

Brown, Brandon; Kinsler, Janni; Folayan, Morenike O; Allen, Karen; Cáceres, Carlos F

2014-06-01

The history of human subjects research and controversial procedures in relation to it has helped form the field of bioethics. Ethically questionable elements may be identified during research design, research implementation, management at the study site, or actions by a study's investigator or other staff. Post-approval monitoring (PAM) may prevent violations from occurring or enable their identification at an early stage. In U.S.-initiated human subjects research taking place in resource-constrained countries with limited development of research regulatory structures, arranging a site visit from a U.S. research ethics committee (REC) becomes difficult, thus creating a potential barrier to regulatory oversight by the parent REC. However, this barrier may be overcome through the use of digital technologies, since much of the world has at least remote access to the Internet. Empirical research is needed to pilot test the use of these technologies for research oversight to ensure the protection of human subjects taking part in research worldwide.

A comprehensive test of clinical reasoning for medical students: An olympiad experience in Iran.

PubMed

Monajemi, Alireza; Arabshahi, Kamran Soltani; Soltani, Akbar; Arbabi, Farshid; Akbari, Roghieh; Custers, Eugene; Hadadgar, Arash; Hadizadeh, Fatemeh; Changiz, Tahereh; Adibi, Peyman

2012-01-01

Although some tests for clinical reasoning assessment are now available, the theories of medical expertise have not played a major role in this filed. In this paper, illness script theory was chose as a theoretical framework and contemporary clinical reasoning tests were put together based on this theoretical model. This paper is a qualitative study performed with an action research approach. This style of research is performed in a context where authorities focus on promoting their organizations' performance and is carried out in the form of teamwork called participatory research. Results are presented in four parts as basic concepts, clinical reasoning assessment, test framework, and scoring. we concluded that no single test could thoroughly assess clinical reasoning competency, and therefore a battery of clinical reasoning tests is needed. This battery should cover all three parts of clinical reasoning process: script activation, selection and verification. In addition, not only both analytical and non-analytical reasoning, but also both diagnostic and management reasoning should evenly take into consideration in this battery. This paper explains the process of designing and implementing the battery of clinical reasoning in the Olympiad for medical sciences students through an action research.

17 CFR Appendix A to Subpart A of... - Appendix A to Subpart A of Part 248 Forms

Code of Federal Regulations, 2010 CFR

2010-04-01

... A of Part 248 Forms A. Any person may view and print this form at: http://www.sec.gov/about/forms... form, as appropriate. 2. The Contents of the Model Privacy Form The model form consists of two pages, which may be printed on both sides of a single sheet of paper, or may appear on two separate pages...

Committees for Ethics in Research involving human subjects.

PubMed

Hossne, William Saad; Vieira, Sonia; De Freitas, Corina Bontempo Duca

2008-01-01

In Brazil since October 1996 there have been guidelines for research involving human subjects. Now human subjects know when their treatment is part of research. Deceit is no longer tolerated. But is not enough to say we offer an explanation to the potential subject and we offer a choice before he or she is confronted with an informed consent form. As in all professional activity, scientific investigation needs social controls. In Brazil, the ultimate responsibility of an investigation lies on the investigator, but in every institution where research is carried out there is a Committee for Ethics in Research. All Committees are subordinated to the National Commission of Ethics in Research, which is submitted to the Brazilian Institute of Health. During 2005 around 17,000 protocols involving 700,000 human subjects were revised by 475 Committees distributed all over the country. Approximately 7,000 people are now working in these Committees.

Balancing animal welfare and assisted reproduction: ethics of preclinical animal research for testing new reproductive technologies.

PubMed

Jans, Verna; Dondorp, Wybo; Goossens, Ellen; Mertes, Heidi; Pennings, Guido; de Wert, Guido

2018-02-07

In the field of medically assisted reproduction (MAR), there is a growing emphasis on the importance of introducing new assisted reproductive technologies (ARTs) only after thorough preclinical safety research, including the use of animal models. At the same time, there is international support for the three R's (replace, reduce, refine), and the European Union even aims at the full replacement of animals for research. The apparent tension between these two trends underlines the urgency of an explicit justification of the use of animals for the development and preclinical testing of new ARTs. Considering that the use of animals remains necessary for specific forms of ART research and taking account of different views on the moral importance of helping people to have a genetically related child, we argue that, in principle, the importance of safety research as part of responsible innovation outweighs the limited infringement of animal wellbeing involved in ART research.

Metamodeling and optimization of the THF process with pulsating pressure

NASA Astrophysics Data System (ADS)

Bucconi, Marco; Strano, Matteo

2018-05-01

Tube hydroforming is a process used in various applications to form the tube in a desired complex shape, by combining the use of internal pressure, which provides the required stress to yield the material, and axial feeding, which helps the material to flow towards the bulging zone. In many studies it has been demonstrated how wrinkling and bursting defects can be severely reduced by means of a pulsating pressure, and how the so-called hammering hydroforming enhances the formability of the material. The definition of the optimum pressure and axial feeding profiles represent a daunting challenge in the designing phase of the hydroforming operation of a new part. The quality of the formed part is highly dependent on the amplitude and the peak value of the pulsating pressure, along with the axial stroke. In this paper, a research is reported, conducted by means of explicit finite element simulations of a hammering THF operation and metamodeling techniques aimed at optimizing the process parameters for the production of a complex part. The improved formability is explored for different factors and an optimization strategy is used to determine the most convenient pressure and axial feed profile curves for the hammering THF process of the examined part. It is shown how the pulsating pressure allows the minimization of the energy input in the process, still respecting final quality requirements.

Defeating a rare, aggressive form of skin cancer with avelumab | Center for Cancer Research

Cancer.gov

For the one-year anniversary of the FDA’s approval of avelumab, CCR Communications caught up with Richard Mulcahy to share his success story as a clinical trial patient. Mulcahy was diagnosed with Merkel cell carcinoma in September of 2016. It’s been over a year since he received his first treatment of avelumab as part of a clinical trial led by Isaac Brownell, M.D., Ph.D.,

Behavioral, Cognitive and Social Science Research in the Military

DTIC Science & Technology

2000-08-01

Education The objective of this project is to demonstrate empirically based cost-effective training strategies , with particular emphasis on how to best ... best to train soldiers for peacekeeping missions and how those techniques differ from training soldiers to take part in war. We want to understand...and formed a new strategic planning process for the entire S&T Program. The foundation of this process is the Defense S&T Strategy , which along with

Blurring the boundaries: using institutional ethnography to inquire into health professions education and practice.

PubMed

Ng, Stella L; Bisaillon, Laura; Webster, Fiona

2017-01-01

Qualitative, social science approaches to research have surged in popularity within health professions education (HPE) over the past decade. Institutional ethnography (IE) offers the field another sociological approach to inquiry. Although widely used in nursing and health care research, IE remains relatively uncommon in the HPE research community. This article provides a brief introduction to IE and suggests why HPE researchers may wish to consider it for future studies. Part 1 of this paper presents IE's conceptual grounding in: (i) the entry point to inquiry ('materiality'), (ii) a generous definition of 'work' and (iii) a focus on how 'texts' such as policies, forms and written protocols influence activity. Part 2 of this paper outlines the method's key features through exemplars from our own research. Part 3 discusses the ways in which research that blurs the lines between educational and clinical practice can be both generative for HPE and accomplished using IE. The authors demonstrate the usefulness of IE for studying complex social issues in HPE. It is posited that a key added value of IE is that it goes beyond individual-level explanations of problems and phenomena, yet also closely studies individuals' activities, rather than remaining at an abstract or distant level of analysis. Thereby, IE can result in feasible and meaningful social change at the nexus of health professions education and other social systems such as clinical practice. IE adds to the growing qualitative research toolkit for HPE researchers. It is worth considering because it may enable change through the study of HPE in relation to other social processes, structures and systems, including the clinical practice world. A particular benefit may be found in blending HPE research with research on clinical practice, toward changing practice and policy through IE, given the interrelated nature of these fields. © 2016 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

A Bayesian approach to reliability and confidence

NASA Technical Reports Server (NTRS)

Barnes, Ron

1989-01-01

The historical evolution of NASA's interest in quantitative measures of reliability assessment is outlined. The introduction of some quantitative methodologies into the Vehicle Reliability Branch of the Safety, Reliability and Quality Assurance (SR and QA) Division at Johnson Space Center (JSC) was noted along with the development of the Extended Orbiter Duration--Weakest Link study which will utilize quantitative tools for a Bayesian statistical analysis. Extending the earlier work of NASA sponsor, Richard Heydorn, researchers were able to produce a consistent Bayesian estimate for the reliability of a component and hence by a simple extension for a system of components in some cases where the rate of failure is not constant but varies over time. Mechanical systems in general have this property since the reliability usually decreases markedly as the parts degrade over time. While they have been able to reduce the Bayesian estimator to a simple closed form for a large class of such systems, the form for the most general case needs to be attacked by the computer. Once a table is generated for this form, researchers will have a numerical form for the general solution. With this, the corresponding probability statements about the reliability of a system can be made in the most general setting. Note that the utilization of uniform Bayesian priors represents a worst case scenario in the sense that as researchers incorporate more expert opinion into the model, they will be able to improve the strength of the probability calculations.

Topics in black holes and quantum cosmology

NASA Astrophysics Data System (ADS)

Campiglia, Miguel

2012-06-01

Black holes and the big bang beginning of the universe are among the most spectacular predictions of general relativity, having a broad impact that ranges from observational astronomy to quantum gravity. In this thesis we will focus on classical and quantum aspects of these subjects: In the first part we present a coordinate-free way of describing the approach to equilibrium of black holes within the framework of dynamical and isolated horizons. In the second part we focus on loop quantum cosmology. We present a uniqueness theorem of its kinematics, and explore the possible ways to implement its dynamics via path integrals.¹ ¹The topics presented here form part of the research done during my PhD studies. See the Vita at the end of the Thesis for a complete list of my work during this period.

Epoxy blanket protects milled part during explosive forming

NASA Technical Reports Server (NTRS)

1966-01-01

Epoxy blanket protects chemically milled or machined sections of large, complex structural parts during explosive forming. The blanket uniformly covers all exposed surfaces and fills any voids to support and protect the entire part.

Forms of presentism in the history of science. Rethinking the project of historical epistemology.

PubMed

Loison, Laurent

2016-12-01

Since the late 1980s, presentism has seen a resurgence among some historians of science. Most of them draw a line between a good form of presentism and typical anachronism, but where the line should be drawn remains an open question. The present article aims at resolving this problem. In the first part I define the four main distinct forms of presentism at work in the history of science and the different purposes they serve. Based on this typology, the second part reconsiders what counts as anachronism, Whiggism and positivist history. This clarification is used as a basis to rethink the research program of historical epistemology in the third section. Throughout this article, I examine the conceptual core of historical epistemology more than its actual history, from Bachelard to Foucault or others. Its project should be defined - as Canguilhem suggested - as an attempt to account for both the contingency and the rationality of science. As such, historical epistemology is based on a complex fifth form of presentism, which I call critical presentism. The critical relation at stake not only works from the present to the past, because of the acknowledged rationality of science, but also from the past to the present because of the contingency and historicity of scientific knowledge. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Social Interaction Anxiety Scale (SIAS) and the Social Phobia Scale (SPS): a comparison of two short-form versions.

PubMed

Fergus, Thomas A; Valentiner, David P; Kim, Hyun-Soo; McGrath, Patrick B

2014-12-01

The widespread use of Mattick and Clarke's (1998) Social Interaction Anxiety Scale (SIAS) and Social Phobia Scale (SPS) led 2 independent groups of researchers to develop short forms of these measures (Fergus, Valentiner, McGrath, Gier-Lonsway, & Kim, 2012; Peters, Sunderland, Andrews, Rapee, & Mattick, 2012). This 3-part study examined the psychometric properties of Fergus et al.'s and Peters et al.'s short forms of the SIAS and SPS using an American nonclinical adolescent sample in Study 1 (N = 98), American patient sample with an anxiety disorder in Study 2 (N = 117), and both a South Korean college student sample (N = 341) and an American college student sample (N = 550) in Study 3. Scores on both sets of short forms evidenced adequate internal consistency, interitem correlations, and measurement invariance. Scores on Fergus et al.'s short forms, particularly their SIAS short form, tended to capture more unique variance in scores of criterion measures than did scores on Peters et al.'s short forms. Implications for the use of these 2 sets of short forms are discussed. (c) 2014 APA, all rights reserved.

Line Parameters Of CH3CN From 305 To 415 cm-1

NASA Astrophysics Data System (ADS)

Brown, Linda R.; Kamadjeu, D. A.; Kleiner, I.; Orphal, J.; Sams, R. L.

2006-12-01

Mapping important compounds, such as hydrocarbons and nitriles, is needed in order to understand the photochemical cycle of Titan and how it couples with the dynamics to produce organic aerosols. For this, the CIRS spectrometer (Composite Infrared Spectrometer) on board Cassini is currently recording rotation and vibration-rotation spectra of Titan between 10 and 1400 cm-1. To support analysis of these data, high resolution laboratory spectra of CH3CN have been recorded using Fourier transform spectrometers at PNL and LISA. This paper presents a prediction of line positions and intensities of CH3 CN for the ν&8 fundamental and the 2ν8 -ν8 hot band (located near 360 cm&-1). Analyses of the two fundamentals near 10 microns are in progress. Part of the research described in this paper was performed at the Jet Propulsion Laboratory, California Institute of Technology, under contract with The National Aeronautics and Space Administration. I.K, J. O and A. D. also want to thank the Programme National de Planétologie for funding part of this research. This research was supported, in part, by the United States Department of Energy, Office of Basic Energy Sciences, Chemical Sciences Division and the experimental part was performed at the W. R, Wiley Environmental Molecular Science Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research located at the Pacific Northwest National Laboratory. Pacific Northwest National Laboratory is operated for the United States Department of Energy by Battelle under contract DE-AC06-76RLO 1830. We wish to thank Drs R. Antilla and S. Alanko for kindly making available supplemental data in electronic and paper forms. #

32 CFR Appendix B to Part 77 - DD Form 2581, Operation Transition Employer Registration

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false DD Form 2581, Operation Transition Employer Registration B Appendix B to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE... to Part 77—DD Form 2581, Operation Transition Employer Registration ER10AU94.042 ER10AU94.043 ...

12 CFR Appendix A to Part 213 - Model Forms

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 2 2010-01-01 2010-01-01 false Model Forms A Appendix A to Part 213 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM CONSUMER LEASING (REGULATION M) Pt. 213, App. A Appendix A to Part 213—Model Forms A-1Model Open-End or Finance Vehicle Lease...

12 CFR Appendix A to Part 213 - Model Forms

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 2 2011-01-01 2011-01-01 false Model Forms A Appendix A to Part 213 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM CONSUMER LEASING (REGULATION M) Pt. 213, App. A Appendix A to Part 213—Model Forms A-1Model Open-End or Finance Vehicle Lease...

45 CFR Appendix B to Part 93 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Disclosure Form To Report Lobbying B Appendix B to Part 93 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION NEW RESTRICTIONS ON LOBBYING Pt. 93, App. B Appendix B to Part 93—Disclosure Form To Report Lobbying EC01JA91.003...

45 CFR Appendix B to Part 93 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 1 2012-10-01 2012-10-01 false Disclosure Form To Report Lobbying B Appendix B to Part 93 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION NEW RESTRICTIONS ON LOBBYING Pt. 93, App. B Appendix B to Part 93—Disclosure Form To Report Lobbying EC01JA91.003...

32 CFR Appendix B to Part 45 - DD Form 214ws

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false DD Form 214ws B Appendix B to Part 45 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE PERSONNEL, MILITARY AND CIVILIAN CERTIFICATE OF RELEASE OR DISCHARGE FROM ACTIVE DUTY (DD FORM 214/5 SERIES) Pt. 45, App. B Appendix B to Part...

10 CFR Appendix B to Part 601 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Disclosure Form To Report Lobbying B Appendix B to Part 601 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS NEW RESTRICTIONS ON LOBBYING Pt. 601, App. B Appendix B to Part 601—Disclosure Form To Report Lobbying EC01OC91.009 EC01OC91.010...

49 CFR Appendix B to Part 26 - Uniform Report of DBE Awards or Commitments and Payments Form

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false Uniform Report of DBE Awards or Commitments and Payments Form B Appendix B to Part 26 Transportation Office of the Secretary of Transportation... PROGRAMS Pt. 26, App. B Appendix B to Part 26—Uniform Report of DBE Awards or Commitments and Payments Form...

10 CFR Appendix B to Part 601 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Disclosure Form To Report Lobbying B Appendix B to Part 601 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS NEW RESTRICTIONS ON LOBBYING Pt. 601, App. B Appendix B to Part 601—Disclosure Form To Report Lobbying EC01OC91.009 EC01OC91.010...

32 CFR Appendix B to Part 45 - DD Form 214ws

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 1 2011-07-01 2011-07-01 false DD Form 214ws B Appendix B to Part 45 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE PERSONNEL, MILITARY AND CIVILIAN CERTIFICATE OF RELEASE OR DISCHARGE FROM ACTIVE DUTY (DD FORM 214/5 SERIES) Pt. 45, App. B Appendix B to Part...

33 CFR Appendix A to Part 105 - Facility Vulnerability and Security Measures Summary (Form CG-6025)

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Facility Vulnerability and Security Measures Summary (Form CG-6025) A Appendix A to Part 105 Navigation and Navigable Waters COAST... Appendix A to Part 105—Facility Vulnerability and Security Measures Summary (Form CG-6025) ER22OC03.000...

32 CFR Appendix C to Part 77 - DD Form 2581-1, Public and Community Service Organization Validation

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false DD Form 2581-1, Public and Community Service Organization Validation C Appendix C to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY..., App. C Appendix C to Part 77—DD Form 2581-1, Public and Community Service Organization Validation...

17 CFR Appendix C to Part 4 - Form CTA-PR

Code of Federal Regulations, 2014 CFR

2014-04-01

... 17 Commodity and Securities Exchanges 1 2014-04-01 2014-04-01 false Form CTA-PR C Appendix C to Part 4 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION COMMODITY POOL OPERATORS AND COMMODITY TRADING ADVISORS Pt. 4, App. C Appendix C to Part 4—Form CTA-PR ER24FE12.052 ER24FE12...

44 CFR Appendix B to Part 18 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2011 CFR

2011-10-01

... 44 Emergency Management and Assistance 1 2011-10-01 2011-10-01 false Disclosure Form To Report Lobbying B Appendix B to Part 18 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY GENERAL NEW RESTRICTIONS ON LOBBYING Pt. 18, App. B Appendix B to Part 18—Disclosure Form To Report Lobbying...

32 CFR Appendix D to Part 113 - Sample DD Form 2654, “Involuntary Allotment Notice and Processing”

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Sample DD Form 2654, âInvoluntary Allotment Notice and Processingâ D Appendix D to Part 113 National Defense Department of Defense OFFICE OF THE..., App. D Appendix D to Part 113—Sample DD Form 2654, “Involuntary Allotment Notice and Processing...

32 CFR Appendix C to Part 77 - DD Form 2581-1, Public and Community Service Organization Validation

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 1 2014-07-01 2014-07-01 false DD Form 2581-1, Public and Community Service Organization Validation C Appendix C to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY..., App. C Appendix C to Part 77—DD Form 2581-1, Public and Community Service Organization Validation...

32 CFR Appendix C to Part 77 - DD Form 2581-1, Public and Community Service Organization Validation

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false DD Form 2581-1, Public and Community Service Organization Validation C Appendix C to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY..., App. C Appendix C to Part 77—DD Form 2581-1, Public and Community Service Organization Validation...

32 CFR Appendix C to Part 77 - DD Form 2581-1, Public and Community Service Organization Validation

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 1 2011-07-01 2011-07-01 false DD Form 2581-1, Public and Community Service Organization Validation C Appendix C to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY..., App. C Appendix C to Part 77—DD Form 2581-1, Public and Community Service Organization Validation...

32 CFR Appendix C to Part 77 - DD Form 2581-1, Public and Community Service Organization Validation

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 1 2012-07-01 2012-07-01 false DD Form 2581-1, Public and Community Service Organization Validation C Appendix C to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY..., App. C Appendix C to Part 77—DD Form 2581-1, Public and Community Service Organization Validation...

27 CFR 45.27 - Forms prescribed.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF THE TREASURY (CONTINUED) TOBACCO REMOVAL OF TOBACCO PRODUCTS AND CIGARETTE PAPERS AND TUBES.... (a) The appropriate TTB officer is authorized to prescribe all forms required by this part. You must... instructions for the form, and as required by this part. You must file each form in accordance with its...

The image of public space on planned housing based on environmental and behavior cognition mapping (case study: Cemara Asri Estate)

NASA Astrophysics Data System (ADS)

Nirfalini Aulia, Dwira; Zahara, Aina

2018-03-01

Public spaces in a planned housing is a place of social interaction for every visitor of public space. The research on public space image uses four public spaces that meet the criteria of public space such as pedestrian sidewalks, public park, water front and worship place. Research on the perception of public space is interesting to investigate because housing development is part of the forming of a society that should design with proper architectural considerations. The purpose of this research is to know the image of public space on the planned housing in Medan City based on the mapping of environmental and behavior cognition and to know the difference between the image that happened to four group respondent. The research method of architecture used in this research is a descriptive qualitative method with case study approach (most similar case). Analysis of data used using mental maps and questionnaires. Then the image of public space is formed based on the elements of public space, wayfinding, route choice, and movement. The image difference that occurs to the housing residents and architecture students, design and planning are outstanding, visitors to the public housing space is good, people who have never visited the public space is inadequate.

Reported consent processes and demographics: a substudy of the INSIGHT Strategic Timing of AntiRetroviral Treatment trial

PubMed Central

Denning, Eileen; Sharma, Shweta; Smolskis, Mary; Touloumi, Giota; Walker, Sarah; Babiker, Abdel; Clewett, Megan; Emanuel, Ezekiel; Florence, Eric; Papadopoulos, Antonios; Sánchez, Adriana; Tavel, Jorge; Grady, Christine

2014-01-01

Objectives Efforts are needed to improve informed consent of participants in research. The Strategic Timing of AntiRetroviral Therapy (START) study provides a unique opportunity to study the effect of length and complexity of informed consent documents on understanding and satisfaction among geographically diverse participants. Methods Interested START sites were randomised to use either the standard consent form or the concise consent form for all of the site’s participants. Results A total of 4473 HIV-positive participants at 154 sites worldwide took part in the Informed Consent Substudy, with consent given in 11 primary languages. Most sites sent written information to potential participants in advance of clinic visits, usually including the consent form. At about half the sites, staff reported spending less than an hour per participant in the consent process. The vast majority of sites assessed participant understanding using informal nonspecific questions or clinical judgment. Conclusions These data reflect the interest of START research staff in evaluating the consent process and improving informed consent. The START Informed Consent Substudy is by far the largest study of informed consent intervention ever conducted. Its results have the potential to impact how consent forms are written around the world. PMID:25711320

Reported consent processes and demographics: a substudy of the INSIGHT Strategic Timing of AntiRetroviral Treatment (START) trial.

PubMed

Denning, E; Sharma, S; Smolskis, M; Touloumi, G; Walker, S; Babiker, A; Clewett, M; Emanuel, E; Florence, E; Papadopoulos, A; Sánchez, A; Tavel, J; Grady, C

2015-04-01

Efforts are needed to improve informed consent of participants in research. The Strategic Timing of AntiRetroviral Therapy (START) study provides a unique opportunity to study the effect of length and complexity of informed consent documents on understanding and satisfaction among geographically diverse participants. Interested START sites were randomized to use either the standard consent form or the concise consent form for all of the site's participants. A total of 4473 HIV-positive participants at 154 sites world-wide took part in the Informed Consent Substudy, with consent given in 11 primary languages. Most sites sent written information to potential participants in advance of clinic visits, usually including the consent form. At about half the sites, staff reported spending less than an hour per participant in the consent process. The vast majority of sites assessed participant understanding using informal nonspecific questions or clinical judgment. These data reflect the interest of START research staff in evaluating the consent process and improving informed consent. The START Informed Consent Substudy is by far the largest study of informed consent intervention ever conducted. Its results have the potential to impact how consent forms are written around the world. © 2015 British HIV Association.

ERUPTING FILAMENTS WITH LARGE ENCLOSING FLUX TUBES AS SOURCES OF HIGH-MASS THREE-PART CMEs, AND ERUPTING FILAMENTS IN THE ABSENCE OF ENCLOSING FLUX TUBES AS SOURCES OF LOW-MASS UNSTRUCTURED CMEs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hutton, Joe; Morgan, Huw, E-mail: joh9@aber.ac.uk

2015-11-01

The 3-part appearance of many coronal mass ejections (CMEs) arising from erupting filaments emerges from a large magnetic flux tube structure, consistent with the form of the erupting filament system. Other CMEs arising from erupting filaments lack a clear 3-part structure and reasons for this have not been researched in detail. This paper aims to further establish the link between CME structure and the structure of the erupting filament system and to investigate whether CMEs which lack a 3-part structure have different eruption characteristics. A survey is made of 221 near-limb filament eruptions observed from 2013 May 03 to 2014more » June 30 by Extreme UltraViolet (EUV) imagers and coronagraphs. Ninety-two filament eruptions are associated with 3-part structured CMEs, 41 eruptions are associated with unstructured CMEs. The remaining 88 are categorized as failed eruptions. For 34% of the 3-part CMEs, processing applied to EUV images reveals the erupting front edge is a pre-existing loop structure surrounding the filament, which subsequently erupts with the filament to form the leading bright front edge of the CME. This connection is confirmed by a flux-rope density model. Furthermore, the unstructured CMEs have a narrower distribution of mass compared to structured CMEs, with total mass comparable to the mass of 3-part CME cores. This study supports the interpretation of 3-part CME leading fronts as the outer boundaries of a large pre-existing flux tube. Unstructured (non 3-part) CMEs are a different family to structured CMEs, arising from the eruption of filaments which are compact flux tubes in the absence of a large system of enclosing closed field.« less

An overview on development of neural network technology

NASA Technical Reports Server (NTRS)

Lin, Chun-Shin

1993-01-01

The study has been to obtain a bird's-eye view of the current neural network technology and the neural network research activities in NASA. The purpose was two fold. One was to provide a reference document for NASA researchers who want to apply neural network techniques to solve their problems. Another one was to report out survey results regarding NASA research activities and provide a view on what NASA is doing, what potential difficulty exists and what NASA can/should do. In a ten week study period, we interviewed ten neural network researchers in the Langley Research Center and sent out 36 survey forms to researchers at the Johnson Space Center, Lewis Research Center, Ames Research Center and Jet Propulsion Laboratory. We also sent out 60 similar forms to educators and corporation researchers to collect general opinions regarding this field. Twenty-eight survey forms, 11 from NASA researchers and 17 from outside, were returned. Survey results were reported in our final report. In the final report, we first provided an overview on the neural network technology. We reviewed ten neural network structures, discussed the applications in five major areas, and compared the analog, digital and hybrid electronic implementation of neural networks. In the second part, we summarized known NASA neural network research studies and reported the results of the questionnaire survey. Survey results show that most studies are still in the development and feasibility study stage. We compared the techniques, application areas, researchers' opinions on this technology, and many aspects between NASA and non-NASA groups. We also summarized their opinions on difficulties encountered. Applications are considered the top research priority by most researchers. Hardware development and learning algorithm improvement are the next. The lack of financial and management support is among the difficulties in research study. All researchers agree that the use of neural networks could result in cost saving. Fault tolerance has been claimed as one important feature of neural computing. However, the survey indicates that very few studies address this issue. Fault tolerance is important in space mission and aircraft control. We believe that it is worthy for NASA to devote more efforts into the utilization of this feature.

Strength and Formability Improvement of Al-Cu-Mn Aluminum Alloy Complex Parts by Thermomechanical Treatment with Sheet Hydroforming

NASA Astrophysics Data System (ADS)

Chen, Yi-Zhe; Liu, Wei; Yuan, Shi-Jian

2015-05-01

Normally, the strength and formability of aluminum alloys can be increased largely by severe plastic deformation and heat treatment. However, many plastic deformation processes are more suitable for making raw material, not for formed parts. In this article, an experimental study of the thermomechanical treatment by using the sheet hydroforming process was developed to improve both mechanical strength and formability for aluminum alloys in forming complex parts. The limiting drawing ratio, thickness, and strain distribution of complex parts formed by sheet hydroforming were investigated to study the formability and sheet-deformation behavior. Based on the optimal formed parts, the tensile strength, microhardness, grain structure, and strengthening precipitates were analyzed to identify the strengthening effect of thermomechanical treatment. The results show that in the solution state, the limiting drawing ratio of cylindrical parts could be increased for 10.9% compared with traditional deep drawing process. The peak values of tensile stress and microhardness of formed parts are 18.0% and 12.5% higher than that in T6 state. This investigation shows that the thermomechanical treatment by sheet hydroforming is a potential method for the products manufacturing of aluminum alloy with high strength and good formability.

Characteristic of student’s false concessive failure on fractions concept

NASA Astrophysics Data System (ADS)

Kurniawan, H.; Sutawidjaja, A.; As’ari, A. R.; Muksar, M.

2018-03-01

False concessive failure of students is students construction failure in achieving goals, where the process is false, the results obtained is true. This failure occurs because the schemes are not connected to each other, so it cannot form a new scheme. This research is a qualitative research that aim to describe the characteristics of students' false concessive failure on fractional concepts. This fractional concept is a fraction of the same part of the whole. To be able to solve the concept of this fraction, students must possess the concept of partition, the concept of addition and the concept of multiplication of the fraction.

Center for Advanced Space Propulsion

NASA Technical Reports Server (NTRS)

1995-01-01

The Center for Advanced Space Propulsion (CASP) is part of the University of Tennessee-Calspan Center for Aerospace Research (CAR). It was formed in 1985 to take advantage of the extensive research faculty and staff of the University of Tennessee and Calspan Corporation. It is also one of sixteen NASA sponsored Centers established to facilitate the Commercial Development of Space. Based on investigators' qualifications in propulsion system development, and matching industries' strong intent, the Center focused its efforts in the following technical areas: advanced chemical propulsion, electric propulsion, AI/Expert systems, fluids management in microgravity, and propulsion materials processing. This annual report focuses its discussion in these technical areas.

Careers and people

NASA Astrophysics Data System (ADS)

2008-09-01

Use your degree The UK's Training and Development Agency is seeking to persuade science and maths graduates who are unhappy in their current jobs to consider switching to teaching. According to their research, 75% of recent science and maths graduates expected to be able to use their degree in their profession, but 46% are dissatisfied because they cannot now use the knowledge and skills gained during their degree in their day-to-day work. This research, which comprised interviews with 200 maths and science graduates who graduated up to three years ago, forms part of a campaign to recruit up to 6000 science and maths teachers for the new school year.

32 CFR Appendix C to Part 113 - Sample DD Form 2653, “Involuntary Allotment Application”

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Sample DD Form 2653, âInvoluntary Allotment Applicationâ C Appendix C to Part 113 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE... Part 113—Sample DD Form 2653, “Involuntary Allotment Application” ER05JA95.002 ER05JA95.003 ...

29 CFR Appendix B to Part 93 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 1 2012-07-01 2012-07-01 false Disclosure Form To Report Lobbying B Appendix B to Part 93 Labor Office of the Secretary of Labor NEW RESTRICTIONS ON LOBBYING Pt. 93, App. B Appendix B to Part 93—Disclosure Form To Report Lobbying EC21OC91.005 EC21OC91.006 EC21OC91.007 ...

49 CFR Appendix B to Part 20 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false Disclosure Form To Report Lobbying B Appendix B to Part 20 Transportation Office of the Secretary of Transportation NEW RESTRICTIONS ON LOBBYING Pt. 20, App. B Appendix B to Part 20—Disclosure Form To Report Lobbying EC02FE91.097 EC02FE91.098 EC02FE91.099 ...

34 CFR Appendix B to Part 82 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 1 2012-07-01 2012-07-01 false Disclosure Form To Report Lobbying B Appendix B to Part 82 Education Office of the Secretary, Department of Education NEW RESTRICTIONS ON LOBBYING Pt. 82, App. B Appendix B to Part 82—Disclosure Form To Report Lobbying EC21OC91.056 EC21OC91.057 EC21OC91.058 ...

29 CFR Appendix B to Part 93 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 1 2011-07-01 2011-07-01 false Disclosure Form To Report Lobbying B Appendix B to Part 93 Labor Office of the Secretary of Labor NEW RESTRICTIONS ON LOBBYING Pt. 93, App. B Appendix B to Part 93—Disclosure Form To Report Lobbying EC21OC91.005 EC21OC91.006 EC21OC91.007 ...

31 CFR Appendix B to Part 212 - Form of Notice of Right to Garnish Federal Benefits

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance: Treasury 2 2014-07-01 2014-07-01 false Form of Notice of Right to Garnish Federal Benefits B Appendix B to Part 212 Money and Finance: Treasury Regulations Relating to Money and... ACCOUNTS CONTAINING FEDERAL BENEFIT PAYMENTS Pt. 212, App. B Appendix B to Part 212—Form of Notice of Right...

45 CFR Appendix B to Part 1168 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 3 2014-10-01 2014-10-01 false Disclosure Form To Report Lobbying B Appendix B to Part 1168 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL FOUNDATION ON THE..., App. B Appendix B to Part 1168—Disclosure Form To Report Lobbying EC01JA91.013 EC01JA91.014 EC01JA91...