A study of noise metric and tone correction accuracy

NASA Technical Reports Server (NTRS)

Sullivan, B. M.; Mabry, J. E.

1982-01-01

Methods currently used to measure human response to aircraft flyover noise were investigated. Response to high level aircraft noise usually experienced outdoors was obtained. Response to aircraft flyover noise typical of indoor exposure was also investigated. It was concluded that current methods for evaluating response to aircraft flyover are more accurate for outdoor noise.

Automatic quality assessment and peak identification of auditory brainstem responses with fitted parametric peaks.

PubMed

Valderrama, Joaquin T; de la Torre, Angel; Alvarez, Isaac; Segura, Jose Carlos; Thornton, A Roger D; Sainz, Manuel; Vargas, Jose Luis

2014-05-01

The recording of the auditory brainstem response (ABR) is used worldwide for hearing screening purposes. In this process, a precise estimation of the most relevant components is essential for an accurate interpretation of these signals. This evaluation is usually carried out subjectively by an audiologist. However, the use of automatic methods for this purpose is being encouraged nowadays in order to reduce human evaluation biases and ensure uniformity among test conditions, patients, and screening personnel. This article describes a new method that performs automatic quality assessment and identification of the peaks, the fitted parametric peaks (FPP). This method is based on the use of synthesized peaks that are adjusted to the ABR response. The FPP is validated, on one hand, by an analysis of amplitudes and latencies measured manually by an audiologist and automatically by the FPP method in ABR signals recorded at different stimulation rates; and on the other hand, contrasting the performance of the FPP method with the automatic evaluation techniques based on the correlation coefficient, FSP, and cross correlation with a predefined template waveform by comparing the automatic evaluations of the quality of these methods with subjective evaluations provided by five experienced evaluators on a set of ABR signals of different quality. The results of this study suggest (a) that the FPP method can be used to provide an accurate parameterization of the peaks in terms of amplitude, latency, and width, and (b) that the FPP remains as the method that best approaches the averaged subjective quality evaluation, as well as provides the best results in terms of sensitivity and specificity in ABR signals validation. The significance of these findings and the clinical value of the FPP method are highlighted on this paper. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Construction of Response Surface with Higher Order Continuity and Its Application to Reliability Engineering

NASA Technical Reports Server (NTRS)

Krishnamurthy, T.; Romero, V. J.

2002-01-01

The usefulness of piecewise polynomials with C1 and C2 derivative continuity for response surface construction method is examined. A Moving Least Squares (MLS) method is developed and compared with four other interpolation methods, including kriging. First the selected methods are applied and compared with one another in a two-design variables problem with a known theoretical response function. Next the methods are tested in a four-design variables problem from a reliability-based design application. In general the piecewise polynomial with higher order derivative continuity methods produce less error in the response prediction. The MLS method was found to be superior for response surface construction among the methods evaluated.

Information Science and Responsive Evaluation

ERIC Educational Resources Information Center

Stake, Robert E.

2014-01-01

Responsive evaluation builds upon the methods of informal evaluation in disciplined ways: getting personally acquainted with the evaluand, observation of activities, interviewing people who are in different ways familiar with the evaluand, searching documents that reveal what happened in the past or somewhere else. It calls for sustained effort to…

[Automated procedure for volumetric measurement of metastases: estimation of tumor burden].

PubMed

Fabel, M; Bolte, H

2008-09-01

Cancer is a common and increasing disease worldwide. Therapy monitoring in oncologic patient care requires accurate and reliable measurement methods for evaluation of the tumor burden. RECIST (response evaluation criteria in solid tumors) and WHO criteria are still the current standards for therapy response evaluation with inherent disadvantages due to considerable interobserver variation of the manual diameter estimations. Volumetric analysis of e.g. lung, liver and lymph node metastases, promises to be a more accurate, precise and objective method for tumor burden estimation.

Prediction of peak response values of structures with and without TMD subjected to random pedestrian flows

NASA Astrophysics Data System (ADS)

Lievens, Klaus; Van Nimmen, Katrien; Lombaert, Geert; De Roeck, Guido; Van den Broeck, Peter

2016-09-01

In civil engineering and architecture, the availability of high strength materials and advanced calculation techniques enables the construction of slender footbridges, generally highly sensitive to human-induced excitation. Due to the inherent random character of the human-induced walking load, variability on the pedestrian characteristics must be considered in the response simulation. To assess the vibration serviceability of the footbridge, the statistics of the stochastic dynamic response are evaluated by considering the instantaneous peak responses in a time range. Therefore, a large number of time windows are needed to calculate the mean value and standard deviation of the instantaneous peak values. An alternative method to evaluate the statistics is based on the standard deviation of the response and a characteristic frequency as proposed in wind engineering applications. In this paper, the accuracy of this method is evaluated for human-induced vibrations. The methods are first compared for a group of pedestrians crossing a lightly damped footbridge. Small differences of the instantaneous peak value were found by the method using second order statistics. Afterwards, a TMD tuned to reduce the peak acceleration to a comfort value, was added to the structure. The comparison between both methods in made and the accuracy is verified. It is found that the TMD parameters are tuned sufficiently and good agreements between the two methods are found for the estimation of the instantaneous peak response for a strongly damped structure.

A two-question method for assessing gender categories in the social and medical sciences.

PubMed

Tate, Charlotte Chuck; Ledbetter, Jay N; Youssef, Cris P

2013-01-01

Three studies (N = 990) assessed the statistical reliability of two methods of determining gender identity that can capture transgender spectrum identities (i.e., current gender identities different from birth-assigned gender categories). Study 1 evaluated a single question with four response options (female, male, transgender, other) on university students. The missing data rate was higher than the valid response rates for transgender and other options using this method. Study 2 evaluated a method of asking two separate questions (i.e., one for current identity and another for birth-assigned category), with response options specific to each. Results showed no missing data and two times the transgender spectrum response rate compared to Study 1. Study 3 showed that the two-question method also worked in community samples, producing near-zero missing data. The two-question method also identified cisgender identities (same birth-assigned and current gender identity), making it a dynamic and desirable measurement tool for the social and medical sciences.

Evaluation of Several Approximate Methods for Calculating the Symmetrical Bending-Moment Response of Flexible Airplanes to Isotropic Atmospheric Turbulence

NASA Technical Reports Server (NTRS)

Bennett, Floyd V.; Yntema, Robert T.

1959-01-01

Several approximate procedures for calculating the bending-moment response of flexible airplanes to continuous isotropic turbulence are presented and evaluated. The modal methods (the mode-displacement and force-summation methods) and a matrix method (segmented-wing method) are considered. These approximate procedures are applied to a simplified airplane for which an exact solution to the equation of motion can be obtained. The simplified airplane consists of a uniform beam with a concentrated fuselage mass at the center. Airplane motions are limited to vertical rigid-body translation and symmetrical wing bending deflections. Output power spectra of wing bending moments based on the exact transfer-function solutions are used as a basis for the evaluation of the approximate methods. It is shown that the force-summation and the matrix methods give satisfactory accuracy and that the mode-displacement method gives unsatisfactory accuracy.

Evaluation and comparison of predictive individual-level general surrogates.

PubMed

Gabriel, Erin E; Sachs, Michael C; Halloran, M Elizabeth

2018-07-01

An intermediate response measure that accurately predicts efficacy in a new setting at the individual level could be used both for prediction and personalized medical decisions. In this article, we define a predictive individual-level general surrogate (PIGS), which is an individual-level intermediate response that can be used to accurately predict individual efficacy in a new setting. While methods for evaluating trial-level general surrogates, which are predictors of trial-level efficacy, have been developed previously, few, if any, methods have been developed to evaluate individual-level general surrogates, and no methods have formalized the use of cross-validation to quantify the expected prediction error. Our proposed method uses existing methods of individual-level surrogate evaluation within a given clinical trial setting in combination with cross-validation over a set of clinical trials to evaluate surrogate quality and to estimate the absolute prediction error that is expected in a new trial setting when using a PIGS. Simulations show that our method performs well across a variety of scenarios. We use our method to evaluate and to compare candidate individual-level general surrogates over a set of multi-national trials of a pentavalent rotavirus vaccine.

Medical Literature Evaluation Education at US Schools of Pharmacy

PubMed Central

Phillips, Jennifer; Demaris, Kendra

2016-01-01

Objective. To determine how medical literature evaluation (MLE) is being taught across the United States and to summarize methods for teaching and assessing MLE. Methods. An 18-question survey was administered to faculty members whose primary responsibility was teaching MLE at schools and colleges of pharmacy. Results. Responses were received from 90 (71%) US schools of pharmacy. The most common method of integrating MLE into the curriculum was as a stand-alone course (49%). The most common placement was during the second professional year (43%) or integrated throughout the curriculum (25%). The majority (77%) of schools used a team-based approach. The use of active-learning strategies was common as was the use of multiple methods of evaluation. Responses varied regarding what role the course director played in incorporating MLE into advanced pharmacy practice experiences (APPEs). Conclusion. There is a trend toward incorporating MLE education components throughout the pre-APPE curriculum and placement of literature review/evaluation exercises into therapeutics practice skills laboratories to help students see how this skill integrates into other patient care skills. Several pre-APPE educational standards for MLE education exist, including journal club activities, a team-based approach to teaching and evaluation, and use of active-learning techniques. PMID:26941431

Longitudinal construct validity: establishment of clinical meaning in patient evaluative instruments.

PubMed

Liang, M H

2000-09-01

Although widely used and reported in research for the evaluation of groups, measures of health status and health-related quality of life have had little application in clinical practice for the assessment of individual patients. One of the principal barriers is the demonstration that these measures add clinically significant information to measures of function or symptoms alone. Here, we review the methods for evaluation of construct validity in longitudinal studies and make recommendations for nomenclature, reporting of study results, and future research agenda. Analytical review. The terms "sensitivity" and "responsiveness" have been used interchangeably, and there are few studies that evaluate the extent to which health status or health-related quality-of life measures capture clinically important changes ("responsiveness"). Current methods of evaluating responsiveness are not standardized or evaluated. Approaches for the assessment of a clinically significant or meaningful change are described; rather than normative information, however, standardized transition questions are proposed. They would be reported routinely and as separate axes of description to capture individual perceptions. Research in methods to assess the subject's evaluation of the importance and magnitude of a measured change are critical if health status and health-related quality-of-life measures are to have an impact on patient care.

How Do Mode and Timing of Follow-up Surveys Affect Evaluation Success?

ERIC Educational Resources Information Center

Koundinya, Vikram; Klink, Jenna; Deming, Philip; Meyers, Andrew; Erb, Kevin

2016-01-01

This article presents the analysis of evaluation methods used in a well-designed and comprehensive evaluation effort of a significant Extension program. The evaluation data collection methods were analyzed by questionnaire mode and timing of follow-up surveys. Response rates from the short- and long-term follow-ups and different questionnaire…

Qualitative radiology assessment of tumor response: does it measure up?

PubMed

Gottlieb, Ronald H; Litwin, Alan; Gupta, Bhavna; Taylor, John; Raczyk, Cheryl; Mashtare, Terry; Wilding, Gregory; Fakih, Marwan

2008-01-01

Our purpose was to assess whether a simpler qualitative evaluation of tumor response by computed tomography is as reproducible and predictive of clinical outcome as the Response Evaluation Criteria in Solid Tumors (RECIST) and World Health Organization (WHO) methods. This study was a two-reader retrospective evaluation in which qualitative assessment resulted in agreement in 21 of 23 patients with metastatic colorectal carcinoma (91.3%, kappa=0.78; 95% CI, 0.51-1.00). Hepatic metastases were classified as increased, decreased, or unchanged, compared with agreement in 20 of 23 patients (87.0%) for RECIST (kappa=0.62; 95% CI, 0.23-1.00) and WHO (kappa=0.67; 95% CI, 0.34-1.00) methods. Patients were placed into partial response, stable disease, and disease progression categories. Time to progression of disease was better predicted qualitatively than by RECIST or WHO. Our pilot data suggest that our qualitative scoring system is more reproducible and predictive of patient clinical outcome than the RECIST and WHO methods.

Improving the evaluation of therapeutic interventions in multiple sclerosis: the role of new psychometric methods.

PubMed

Hobart, J; Cano, S

2009-02-01

In this monograph we examine the added value of new psychometric methods (Rasch measurement and Item Response Theory) over traditional psychometric approaches by comparing and contrasting their psychometric evaluations of existing sets of rating scale data. We have concentrated on Rasch measurement rather than Item Response Theory because we believe that it is the more advantageous method for health measurement from a conceptual, theoretical and practical perspective. Our intention is to provide an authoritative document that describes the principles of Rasch measurement and the practice of Rasch analysis in a clear, detailed, non-technical form that is accurate and accessible to clinicians and researchers in health measurement. A comparison was undertaken of traditional and new psychometric methods in five large sets of rating scale data: (1) evaluation of the Rivermead Mobility Index (RMI) in data from 666 participants in the Cannabis in Multiple Sclerosis (CAMS) study; (2) evaluation of the Multiple Sclerosis Impact Scale (MSIS-29) in data from 1725 people with multiple sclerosis; (3) evaluation of test-retest reliability of MSIS-29 in data from 150 people with multiple sclerosis; (4) examination of the use of Rasch analysis to equate scales purporting to measure the same health construct in 585 people with multiple sclerosis; and (5) comparison of relative responsiveness of the Barthel Index and Functional Independence Measure in data from 1400 people undergoing neurorehabilitation. Both Rasch measurement and Item Response Theory are conceptually and theoretically superior to traditional psychometric methods. Findings from each of the five studies show that Rasch analysis is empirically superior to traditional psychometric methods for evaluating rating scales, developing rating scales, analysing rating scale data, understanding and measuring stability and change, and understanding the health constructs we seek to quantify. There is considerable added value in using Rasch analysis rather than traditional psychometric methods in health measurement. Future research directions include the need to reproduce our findings in a range of clinical populations, detailed head-to-head comparisons of Rasch analysis and Item Response Theory, and the application of Rasch analysis to clinical practice.

Defining the baseline for inhibition concentration calculations for hormetic hazards.

PubMed

Bailer, A J; Oris, J T

2000-01-01

The use of endpoint estimates based on modeling inhibition of test organism response relative to a baseline response is an important tool in the testing and evaluation of aquatic hazards. In the presence of a hormetic hazard, the definition of the baseline response is not clear because non-zero levels of the hazard stimulate an enhanced response prior to inhibition. In the present study, the methodology and implications of how one defines a baseline response for inhibition concentration estimation in aquatic toxicity tests was evaluated. Three possible baselines were considered: the control response level; the pooling of responses, including controls and all concentration conditions with responses enhanced relative to controls; and, finally, the maximal response. The statistical methods associated with estimating inhibition relative to the first two baseline definitions were described and a method for estimating inhibition relative to the third baseline definition was derived. These methods were illustrated with data from a standard aquatic zooplankton reproductive toxicity test in which the number of young produced in three broods of a cladoceran exposed to effluent was modeled as a function of effluent concentration. Copyright 2000 John Wiley & Sons, Ltd.

Semiquantitative visual approach to scoring lung cancer treatment response using computed tomography: a pilot study.

PubMed

Gottlieb, Ronald H; Kumar, Prasanna; Loud, Peter; Klippenstein, Donald; Raczyk, Cheryl; Tan, Wei; Lu, Jenny; Ramnath, Nithya

2009-01-01

Our objective was to compare a newly developed semiquantitative visual scoring (SVS) method with the current standard, the Response Evaluation Criteria in Solid Tumors (RECIST) method, in the categorization of treatment response and reader agreement for patients with metastatic lung cancer followed by computed tomography. The 18 subjects (5 women and 13 men; mean age, 62.8 years) were from an institutional review board-approved phase 2 study that evaluated a second-line chemotherapy regimen for metastatic (stages III and IV) non-small cell lung cancer. Four radiologists, blinded to the patient outcome and each other's reads, evaluated the change in the patients' tumor burden from the baseline to the first restaging computed tomographic scan using either the RECIST or the SVS method. We compared the numbers of patients placed into the partial response, the stable disease (SD), and the progressive disease (PD) categories (Fisher exact test) and observer agreement (kappa statistic). Requiring the concordance of 3 of the 4 readers resulted in the RECIST placing 17 (100%) of 17 patients in the SD category compared with the SVS placing 9 (60%) of 15 patients in the partial response, 5 (33%) of the 15 patients in the SD, and 1 (6.7%) of the 15 patients in the PD categories (P < 0.0001). Interobserver agreement was higher among the readers using the SVS method (kappa, 0.54; P < 0.0001) compared with that of the readers using the RECIST method (kappa, -0.01; P = 0.5378). Using the SVS method, the readers more finely discriminated between the patient response categories with superior agreement compared with the RECIST method, which could potentially result in large differences in early treatment decisions for advanced lung cancer.

Evaluating linear response in active systems with no perturbing field

NASA Astrophysics Data System (ADS)

Szamel, Grzegorz

2017-03-01

We present a method for the evaluation of time-dependent linear response functions for systems of active particles propelled by a persistent (colored) noise from unperturbed simulations. The method is inspired by the Malliavin weights sampling method proposed by Warren and Allen (Phys. Rev. Lett., 109 (2012) 250601) for out-of-equilibrium systems of passive Brownian particles. We illustrate our method by evaluating two linear response functions for a single active particle in an external harmonic potential. As an application, we calculate the time-dependent mobility function and an effective temperature, defined through the Einstein relation between the self-diffusion and mobility coefficients, for a system of many active particles interacting via a screened Coulomb potential. We find that this effective temperature decreases with increasing persistence time of the self-propulsion. Initially, for not too large persistence times, it changes rather slowly, but then it decreases markedly when the persistence length of the self-propelled motion becomes comparable with the particle size.

Evaluating linear response in active systems with no perturbing field: Application to the calculation of an effective temperature

NASA Astrophysics Data System (ADS)

Szamel, Grzegorz

We present a method for the evaluation of time-dependent linear response functions for systems of active particles propelled by a persistent (colored) noise from unperturbed simulations. The method is inspired by the Malliavin weights sampling method proposed earlier for systems of (passive) Brownian particles. We illustrate our method by evaluating a linear response function for a single active particle in an external harmonic potential. As an application, we calculate the time-dependent mobility function and an effective temperature, defined through the Einstein relation between the self-diffusion and mobility coefficients, for a system of active particles interacting via a screened-Coulomb potential. We find that this effective temperature decreases with increasing persistence time of the self-propulsion. Initially, for not too large persistence times, it changes rather slowly, but then it decreases markedly when the persistence length of the self-propelled motion becomes comparable with the particle size. Supported by NSF and ERC.

[Information value of "additional tasks" method to evaluate pilot's work load].

PubMed

Gorbunov, V V

2005-01-01

"Additional task" method was used to evaluate pilot's work load in prolonged flight. Calculated through durations of latent periods of motor responses, quantitative criterion of work load is more informative for objective evaluation of pilot's involvement in his piloting functions rather than of other registered parameters.

Annoyance rate evaluation method on ride comfort of vehicle suspension system

NASA Astrophysics Data System (ADS)

Tang, Chuanyin; Zhang, Yimin; Zhao, Guangyao; Ma, Yan

2014-03-01

The existing researches of the evaluation method of ride comfort of vehicle mainly focus on the level of human feelings to vibration. The level of human feelings to vibration is influenced by many factors, however, the ride comfort according to the common principle of probability and statistics and simple binary logic is unable to reflect these uncertainties. The random fuzzy evaluation model from people subjective response to vibration is adopted in the paper, these uncertainties are analyzed from the angle of psychological physics. Discussing the traditional evaluation of ride comfort during vehicle vibration, a fuzzily random evaluation model on the basis of annoyance rate is proposed for the human body's subjective response to vibration, with relevant fuzzy membership function and probability distribution given. A half-car four degrees of freedom suspension vibration model is described, subject to irregular excitations from the road surface, with the aid of software Matlab/Simulink. A new kind of evaluation method for ride comfort of vehicles is proposed in the paper, i.e., the annoyance rate evaluation method. The genetic algorithm and neural network control theory are used to control the system. Simulation results are obtained, such as the comparison of comfort reaction to vibration environments between before and after control, relationship of annoyance rate to vibration frequency and weighted acceleration, based on ISO 2631/1(1982), ISO 2631-1(1997) and annoyance rate evaluation method, respectively. Simulated assessment results indicate that the proposed active suspension systems prove to be effective in the vibration isolation of the suspension system, and the subjective response of human being can be promoted from very uncomfortable to a little uncomfortable. Furthermore, the novel evaluation method based on annoyance rate can further estimate quantitatively the number of passengers who feel discomfort due to vibration. A new analysis method of vehicle comfort is presented.

An ACC Design Method for Achieving Both String Stability and Ride Comfort

NASA Astrophysics Data System (ADS)

Yamamura, Yoshinori; Seto, Yoji; Nishira, Hikaru; Kawabe, Taketoshi

An investigation was made of a method for designing adaptive cruise control (ACC) so as to achieve a headway distance response that feels natural to the driver while at the same time obtaining high levels of both string stability and ride comfort. With this design method, the H∞ norm is adopted as the index of string stability. Additionally, two norms are introduced for evaluating ride comfort and natural vehicle behavior. The relationship between these three norms and headway distance response characteristics was analyzed, and an evaluation method was established for achieving high levels of the various performance characteristics required of ACC. An ACC system designed with this method was evaluated in driving tests conducted on a proving ground course, and the results confirmed that it achieved the targeted levels of string stability, ride comfort and natural vehicle behavior.

A comparison of web-based and paper-based survey methods: testing assumptions of survey mode and response cost.

PubMed

Greenlaw, Corey; Brown-Welty, Sharon

2009-10-01

Web-based surveys have become more prevalent in areas such as evaluation, research, and marketing research to name a few. The proliferation of these online surveys raises the question, how do response rates compare with traditional surveys and at what cost? This research explored response rates and costs for Web-based surveys, paper surveys, and mixed-mode surveys. The participants included evaluators from the American Evaluation Association (AEA). Results included that mixed-mode, while more expensive, had higher response rates.

Cancer Education Program Evaluation: A Responsive Approach to Planning an Evaluation and Initial Results.

ERIC Educational Resources Information Center

Pearsol, James A.

This paper describes evaluation planning for the Cancer Education Program (CEP) at Ohio State University (OSU). The three-year OSU CEP project was designed as a multidisciplinary cancer education program. A responsive method, which trades off some measurement precision in order to increase the usefulness of the findings, was employed in the…

Reliability evaluation of microgrid considering incentive-based demand response

NASA Astrophysics Data System (ADS)

Huang, Ting-Cheng; Zhang, Yong-Jun

2017-07-01

Incentive-based demand response (IBDR) can guide customers to adjust their behaviour of electricity and curtail load actively. Meanwhile, distributed generation (DG) and energy storage system (ESS) can provide time for the implementation of IBDR. The paper focus on the reliability evaluation of microgrid considering IBDR. Firstly, the mechanism of IBDR and its impact on power supply reliability are analysed. Secondly, the IBDR dispatch model considering customer’s comprehensive assessment and the customer response model are developed. Thirdly, the reliability evaluation method considering IBDR based on Monte Carlo simulation is proposed. Finally, the validity of the above models and method is studied through numerical tests on modified RBTS Bus6 test system. Simulation results demonstrated that IBDR can improve the reliability of microgrid.

A comparison of analysis methods to estimate contingency strength.

PubMed

Lloyd, Blair P; Staubitz, Johanna L; Tapp, Jon T

2018-05-09

To date, several data analysis methods have been used to estimate contingency strength, yet few studies have compared these methods directly. To compare the relative precision and sensitivity of four analysis methods (i.e., exhaustive event-based, nonexhaustive event-based, concurrent interval, concurrent+lag interval), we applied all methods to a simulated data set in which several response-dependent and response-independent schedules of reinforcement were programmed. We evaluated the degree to which contingency strength estimates produced from each method (a) corresponded with expected values for response-dependent schedules and (b) showed sensitivity to parametric manipulations of response-independent reinforcement. Results indicated both event-based methods produced contingency strength estimates that aligned with expected values for response-dependent schedules, but differed in sensitivity to response-independent reinforcement. The precision of interval-based methods varied by analysis method (concurrent vs. concurrent+lag) and schedule type (continuous vs. partial), and showed similar sensitivities to response-independent reinforcement. Recommendations and considerations for measuring contingencies are identified. © 2018 Society for the Experimental Analysis of Behavior.

Early Dose Response to Yttrium-90 Microsphere Treatment of Metastatic Liver Cancer by a Patient-Specific Method Using Single Photon Emission Computed Tomography and Positron Emission Tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, Janice M.; Department of Radiation Oncology, Wayne State University, Detroit, MI; Wong, C. Oliver

2009-05-01

Purpose: To evaluate a patient-specific single photon emission computed tomography (SPECT)-based method of dose calculation for treatment planning of yttrium-90 ({sup 90}Y) microsphere selective internal radiotherapy (SIRT). Methods and Materials: Fourteen consecutive {sup 90}Y SIRTs for colorectal liver metastasis were retrospectively analyzed. Absorbed dose to tumor and normal liver tissue was calculated by partition methods with two different tumor/normal liver vascularity ratios: an average 3:1 and a patient-specific ratio derived from pretreatment technetium-99m macroaggregated albumin SPECT. Tumor response was quantitatively evaluated from fluorine-18 fluoro-2-deoxy-D-glucose positron emission tomography scans. Results: Positron emission tomography showed a significant decrease in total tumor standardizedmore » uptake value (average, 52%). There was a significant difference in the tumor absorbed dose between the average and specific methods (p = 0.009). Response vs. dose curves fit by linear and linear-quadratic modeling showed similar results. Linear fit r values increased for all tumor response parameters with the specific method (+0.20 for mean standardized uptake value). Conclusion: Tumor dose calculated with the patient-specific method was more predictive of response in liver-directed {sup 90}Y SIRT.« less

Evaluation of the Inertial Response of Variable-Speed Wind Turbines Using Advanced Simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scholbrock, Andrew K; Muljadi, Eduard; Gevorgian, Vahan

In this paper, we focus on the temporary frequency support effect provided by wind turbine generators (WTGs) through the inertial response. With the implemented inertial control methods, the WTG is capable of increasing its active power output by releasing parts of the stored kinetic energy when the frequency excursion occurs. The active power can be boosted temporarily above the maximum power points, but the rotor speed deceleration follows and an active power output deficiency occurs during the restoration of rotor kinetic energy. We evaluate and compare the inertial response induced by two distinct inertial control methods using advanced simulation. Inmore » the first stage, the proposed inertial control methods are analyzed in offline simulation. Using an advanced wind turbine simulation program, FAST with TurbSim, the response of the researched wind turbine is comprehensively evaluated under turbulent wind conditions, and the impact on the turbine mechanical components are assessed. In the second stage, the inertial control is deployed on a real 600kW wind turbine - Controls Advanced Research Turbine, 3-bladed (CART3), which further verifies the inertial control through a hardware-in-the-loop (HIL) simulation. Various inertial control methods can be effectively evaluated based on the proposed two-stage simulation platform, which combines the offline simulation and real-time HIL simulation. The simulation results also provide insights in designing inertial control for WTGs.« less

In Vitro Evaluation of Fluorescence Glucose Biosensor Response

PubMed Central

Aloraefy, Mamdouh; Pfefer, T. Joshua; Ramella-Roman, Jessica C.; Sapsford, Kim E.

2014-01-01

Rapid, accurate, and minimally-invasive glucose biosensors based on Förster Resonance Energy Transfer (FRET) for glucose measurement have the potential to enhance diabetes control. However, a standard set of in vitro approaches for evaluating optical glucose biosensor response under controlled conditions would facilitate technological innovation and clinical translation. Towards this end, we have identified key characteristics and response test methods, fabricated FRET-based glucose biosensors, and characterized biosensor performance using these test methods. The biosensors were based on competitive binding between dextran and glucose to concanavalin A and incorporated long-wavelength fluorescence dye pairs. Testing characteristics included spectral response, linearity, sensitivity, limit of detection, kinetic response, reversibility, stability, precision, and accuracy. The biosensor demonstrated a fluorescence change of 45% in the presence of 400 mg/dL glucose, a mean absolute relative difference of less than 11%, a limit of detection of 25 mg/dL, a response time of 15 min, and a decay in fluorescence intensity of 72% over 30 days. The battery of tests presented here for objective, quantitative in vitro evaluation of FRET glucose biosensors performance have the potential to form the basis of future consensus standards. By implementing these test methods for a long-visible-wavelength biosensor, we were able to demonstrate strengths and weaknesses with a new level of thoroughness and rigor. PMID:25006996

In vitro evaluation of fluorescence glucose biosensor response.

PubMed

Aloraefy, Mamdouh; Pfefer, T Joshua; Ramella-Roman, Jessica C; Sapsford, Kim E

2014-07-08

Rapid, accurate, and minimally-invasive glucose biosensors based on Förster Resonance Energy Transfer (FRET) for glucose measurement have the potential to enhance diabetes control. However, a standard set of in vitro approaches for evaluating optical glucose biosensor response under controlled conditions would facilitate technological innovation and clinical translation. Towards this end, we have identified key characteristics and response test methods, fabricated FRET-based glucose biosensors, and characterized biosensor performance using these test methods. The biosensors were based on competitive binding between dextran and glucose to concanavalin A and incorporated long-wavelength fluorescence dye pairs. Testing characteristics included spectral response, linearity, sensitivity, limit of detection, kinetic response, reversibility, stability, precision, and accuracy. The biosensor demonstrated a fluorescence change of 45% in the presence of 400 mg/dL glucose, a mean absolute relative difference of less than 11%, a limit of detection of 25 mg/dL, a response time of 15 min, and a decay in fluorescence intensity of 72% over 30 days. The battery of tests presented here for objective, quantitative in vitro evaluation of FRET glucose biosensors performance have the potential to form the basis of future consensus standards. By implementing these test methods for a long-visible-wavelength biosensor, we were able to demonstrate strengths and weaknesses with a new level of thoroughness and rigor.

A novel approach to assess the treatment response using Gaussian random field in PET

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Mengdie; Guo, Ning; Hu, Guangshu

2016-02-15

Purpose: The assessment of early therapeutic response to anticancer therapy is vital for treatment planning and patient management in clinic. With the development of personal treatment plan, the early treatment response, especially before any anatomically apparent changes after treatment, becomes urgent need in clinic. Positron emission tomography (PET) imaging serves an important role in clinical oncology for tumor detection, staging, and therapy response assessment. Many studies on therapy response involve interpretation of differences between two PET images, usually in terms of standardized uptake values (SUVs). However, the quantitative accuracy of this measurement is limited. This work proposes a statistically robustmore » approach for therapy response assessment based on Gaussian random field (GRF) to provide a statistically more meaningful scale to evaluate therapy effects. Methods: The authors propose a new criterion for therapeutic assessment by incorporating image noise into traditional SUV method. An analytical method based on the approximate expressions of the Fisher information matrix was applied to model the variance of individual pixels in reconstructed images. A zero mean unit variance GRF under the null hypothesis (no response to therapy) was obtained by normalizing each pixel of the post-therapy image with the mean and standard deviation of the pretherapy image. The performance of the proposed method was evaluated by Monte Carlo simulation, where XCAT phantoms (128{sup 2} pixels) with lesions of various diameters (2–6 mm), multiple tumor-to-background contrasts (3–10), and different changes in intensity (6.25%–30%) were used. The receiver operating characteristic curves and the corresponding areas under the curve were computed for both the proposed method and the traditional methods whose figure of merit is the percentage change of SUVs. The formula for the false positive rate (FPR) estimation was developed for the proposed therapy response assessment utilizing local average method based on random field. The accuracy of the estimation was validated in terms of Euler distance and correlation coefficient. Results: It is shown that the performance of therapy response assessment is significantly improved by the introduction of variance with a higher area under the curve (97.3%) than SUVmean (91.4%) and SUVmax (82.0%). In addition, the FPR estimation serves as a good prediction for the specificity of the proposed method, consistent with simulation outcome with ∼1 correlation coefficient. Conclusions: In this work, the authors developed a method to evaluate therapy response from PET images, which were modeled as Gaussian random field. The digital phantom simulations demonstrated that the proposed method achieved a large reduction in statistical variability through incorporating knowledge of the variance of the original Gaussian random field. The proposed method has the potential to enable prediction of early treatment response and shows promise for application to clinical practice. In future work, the authors will report on the robustness of the estimation theory for application to clinical practice of therapy response evaluation, which pertains to binary discrimination tasks at a fixed location in the image such as detection of small and weak lesion.« less

Clinical evaluation of the Jay Sensitivity Sensor Probe: a new microprocessor-controlled instrument to evaluate dentin hypersensitivity.

PubMed

Sowinski, Joseph A; Kakar, Ashish; Kakar, Kanupriya

2013-05-01

To compare the Jay Sensitivity Sensor Probe (Jay Probe), a new microprocessor-based, pre-calibrated instrument, with well accepted methods used to evaluate sensitivity, i.e. tactile response to the Yeaple Probe, air blast (Schiff scale), and patient responses by Visual Analog Score (VAS). Jay Probe assessments were accomplished using several approaches. With a cohort of 12 subjects, two clinical examiners compared the repeatability of the Jay and Yeaple Probes. A second evaluation of both probes was conducted during two independent parallel design clinical studies each enrolling 100 adults with dentin hypersensitivity (DH). In each study, subjects were evaluated for DH responses after twice daily oral hygiene with a negative control fluoride dentifrice or a positive control dentifrice formulated with ingredients proven to reduce sensitivity, i.e. potassium nitrate or 8.0% arginine with calcium carbonate. Tactile evaluations by the Jay and Yeaple Probes were conducted at baseline and recall visits over the 8-week duration of each study. Also evaluated at each visit were responses to air blast and to patient reported DH assessment by VAS. Low inter-examiner variability with no significant differences between replicate measurements (P > 0.05) was observed with the Jay Probe. Consistent with results from previous studies, subjects assigned dentifrices formulated with potassium nitrate or 8% arginine/calcium carbonate demonstrated improvements in Yeaple, air blast and VAS responses in comparison to those assigned the fluoride dentifrice (P < 0.05). Jay Probe responses correlated significantly with all other sensitivity measures (P < 0.05). Differences between these treatments were observed at all post-treatment evaluations using these methods.

Inter-observer agreement improves with PERCIST 1.0 as opposed to qualitative evaluation in non-small cell lung cancer patients evaluated with F-18-FDG PET/CT early in the course of chemo-radiotherapy.

PubMed

Fledelius, Joan; Khalil, Azza; Hjorthaug, Karin; Frøkiær, Jørgen

2016-12-01

The purpose of this study is to determine whether a qualitative approach or a semi-quantitative approach provides the most robust method for early response evaluation with 2'-deoxy-2'-[(18)F]fluoro-D-glucose (F-18-FDG) positron emission tomography combined with whole body computed tomography (PET/CT) in non-small cell lung cancer (NSCLC). In this study eight Nuclear Medicine consultants analyzed F-18-FDG PET/CT scans from 35 patients with locally advanced NSCLC. Scans were performed at baseline and after 2 cycles of chemotherapy. Each observer used two different methods for evaluation: (1) PET response criteria in solid tumors (PERCIST) 1.0 and (2) a qualitative approach. Both methods allocate patients into one of four response categories (complete and partial metabolic response (CMR and PMR) and stable and progressive metabolic disease (SMD and PMD)). The inter-observer agreement was evaluated using Fleiss' kappa for multiple raters, Cohens kappa for comparison of the two methods, and intraclass correlation coefficients (ICC) for comparison of lean body mass corrected standardized uptake value (SUL) peak measurements. The agreement between observers when determining the percentage change in SULpeak was "almost perfect", with ICC = 0.959. There was a strong agreement among observers allocating patients to the different response categories with a Fleiss kappa of 0.76 (0.71-0.81). In 22 of the 35 patients, complete agreement was observed with PERCIST 1.0. The agreement was lower when using the qualitative method, moderate, having a Fleiss kappa of 0.60 (0.55-0.64). Complete agreement was achieved in only 10 of the 35 patients. The difference between the two methods was statistically significant (p < 0.005) (chi-squared). Comparing the two methods for each individual observer showed Cohen's kappa values ranging from 0.64 to 0.79, translating into a strong agreement between the two methods. PERCIST 1.0 provides a higher overall agreement between observers than the qualitative approach in categorizing early treatment response in NSCLC patients. The inter-observer agreement is in fact strong when using PERCIST 1.0 even when the level of instruction is purposely kept to a minimum in order to mimic the everyday situation. The variability is largely owing to the subjective elements of the method.

Development of a Nationally Coordinated Evaluation Plan for the Ghana National Strategy for Key Populations

PubMed Central

Reynolds, Heidi W; Atuahene, Kyeremeh; Sutherland, Elizabeth; Amenyah, Richard; Kwao, Isaiah Doe; Larbi, Emmanuel Tettey

2015-01-01

Objective Just as HIV prevention programs need to be tailored to the local epidemic, so should evaluations be country-owned and country-led to ensure use of those results in decision making and policy. The objective of this paper is to describe the process undertaken in Ghana to develop a national evaluation plan for the Ghana national strategy for key populations. Methods This was a participatory process that involved meetings between the Ghana AIDS Commission (GAC), other partners in Ghana working to prevent HIV among key populations, and MEASURE Evaluation. The process included three two-day, highly structured yet participatory meetings over the course of 12 months during which participants shared information about on-going and planned data and identified research questions and methods. Results An evaluation plan was prepared to inform stakeholders about which data collection activities need to be prioritized for funding, who would implement the study, the timing of data collection, the research question the data will help answer, and the analysis methods. The plan discusses various methods that can be used including the recommendation for the study design using multiple data sources. It has an evaluation conceptual model, proposed analyses, proposed definition of independent variables, estimated costs for filling data gaps, roles and responsibilities of stakeholders to carry out the plan, and considerations for ethics, data sharing and authorship. Conclusion The experience demonstrates that it is possible to design an evaluation responsive to national strategies and priorities with country leadership, regardless of stakeholders' experiences with evaluations. This process may be replicable elsewhere, where stakeholders want to plan and implement an evaluation of a large-scale program at the national or subnational level that is responsive to national priorities and part of a comprehensive monitoring and evaluation system. PMID:26120495

Optically Based Rapid Screening Method for Proven Optimal Treatment Strategies before Treatment Begins

DTIC Science & Technology

2014-08-01

tumor size, measured by mammography, MRI, or ultrasound. These methods evaluate the regimen that the patient received. Molecular changes induced by...photon counting electronics (SPC-150, Becker and Hickl) and a GaAsP PMT (H7422P-40, Hamamatsu). Photon count rates were maintained above 5x10 5...conditions (33), thus making them an attractive system to evaluate tumor response to drugs. We used OMI to assess the response of primary breast tumor

Comparative capture rate responses of mosquito vectors to light trap and human landing collection methods

USDA-ARS?s Scientific Manuscript database

Capture rate responses of female Aedes albopictus Skuse, Anopheles quadrimaculatus Say, Culex nigripalpus Theobald, Culex quinquefasciatus Say, and Ochlerotatus triseriatus (Wiedemann) to CDC-type light trap (LT) and human landing (HL) collection methods were observed and evaluated for congruency wi...

A surface acoustic wave response detection method for passive wireless torque sensor

NASA Astrophysics Data System (ADS)

Fan, Yanping; Kong, Ping; Qi, Hongli; Liu, Hongye; Ji, Xiaojun

2018-01-01

This paper presents an effective surface acoustic wave (SAW) response detection method for the passive wireless SAW torque sensor to improve the measurement accuracy. An analysis was conducted on the relationship between the response energy-entropy and the bandwidth of SAW resonator (SAWR). A self-correlation method was modified to suppress the blurred white noise and highlight the attenuation characteristic of wireless SAW response. The SAW response was detected according to both the variation and the duration of energy-entropy ascension of an acquired RF signal. Numerical simulation results showed that the SAW response can be detected even when the signal-to-noise ratio (SNR) is 6dB. The proposed SAW response detection method was evaluated with several experiments at different conditions. The SAW response can be well distinguished from the sinusoidal signal and the noise. The performance of the SAW torque measurement system incorporating the detection method was tested. The obtained repeatability error was 0.23% and the linearity was 0.9934, indicating the validity of the detection method.

Analytical ultrasonics for evaluation of composite materials response. Part 2: Generation and detection

NASA Technical Reports Server (NTRS)

Duke, J. C., Jr.; Henneke, E. G., II

1986-01-01

To evaluate the response of composite materials, it is imperative that the input excitation as well as the observed output be well characterized. This characterization ideally should be in terms of displacements as a function of time with high spatial resolution. Additionally, the ability to prescribe these features for the excitation is highly desirable. Various methods for generating and detecting ultrasound in advanced composite materials are examined. Characterization and tailoring of input excitation is considered for contact and noncontact, mechanical, and electromechanical devices. Type of response as well as temporal and spatial resolution of detection methods are discussed as well. Results of investigations at Virginia Tech in application of these techniques to characterizing the response of advanced composites are presented.

Laboratory test methods for evaluating the fire response of aerospace materials

NASA Technical Reports Server (NTRS)

Hilado, C. J.

1979-01-01

The test methods which were developed or evaluated were intended to serve as means of comparing materials on the basis of specific responses under specific sets of test conditions, using apparatus, facilities, and personnel that would be within the capabilities of perhaps the majority of laboratories. Priority was given to test methods which showed promise of addressing the pre-ignition state of a potential fire. These test methods were intended to indicate which materials may present more hazard than others under specific test conditions. These test methods are discussed and arranged according to the stage of a fire to which they are most relevant. Some observations of material performance which resulted from this work are also discussed.

Evaluation and statistical judgement of neural responses to sinusoidal stimulation in cases with superimposed drift and noise.

PubMed

Jastreboff, P W

1979-06-01

Time histograms of neural responses evoked by sinuosidal stimulation often contain a slow drifting and an irregular noise which disturb Fourier analysis of these responses. Section 2 of this paper evaluates the extent to which a linear drift influences the Fourier analysis, and develops a combined Fourier and linear regression analysis for detecting and correcting for such a linear drift. Usefulness of this correcting method is demonstrated for the time histograms of actual eye movements and Purkinje cell discharges evoked by sinusoidal rotation of rabbits in the horizontal plane. In Sect. 3, the analysis of variance is adopted for estimating the probability of the random occurrence of the response curve extracted by Fourier analysis from noise. This method proved to be useful for avoiding false judgements as to whether the response curve was meaningful, particularly when the response was small relative to the contaminating noise.

Malpractice and medical liability. European Guidelines on Methods of Ascertainment and Criteria of Evaluation.

PubMed

Ferrara, Santo Davide; Baccino, Eric; Bajanowski, Thomas; Boscolo-Berto, Rafael; Castellano, Maria; De Angel, Ricardo; Pauliukevičius, Alvydas; Ricci, Pietrantonio; Vanezis, Peter; Vieira, Duarte Nuno; Viel, Guido; Villanueva, Enrique

2013-05-01

The manuscript presents the European Guidelines on medico-legal Methods of Ascertainment and Criteria of Evaluation in cases of suspected subjective "Medical Responsibility and/or Liability" developed by an international working group under the patronage of the European Academy of Legal Medicine. It includes a step-by-step illustrated explanation of approved Flow Charts, articulated in 18 sequential steps and comprehensive of both Methods of Ascertainment and Evaluation Criteria.

Performance evaluation of setback buildings with open ground storey on plain and sloping ground under earthquake loadings and mitigation of failure

NASA Astrophysics Data System (ADS)

Ghosh, Rahul; Debbarma, Rama

2017-06-01

Setback structures are highly vulnerable during earthquakes due to its vertical geometrical and mass irregularity, but the vulnerability becomes higher if the structures also have stiffness irregularity in elevation. The risk factor of such structure may increase, if the structure rests on sloping ground. In this paper, an attempt has been made to evaluate the seismic performance of setback structures resting on plain ground as well as in the slope of a hill, with soft storey configuration. The analysis has been performed in three individual methods, equivalent static force method, response spectrum method and time history method and extreme responses have been recorded for open ground storeyed setback building. To mitigate this soft storey effect and the extreme responses, three individual mitigation techniques have been adopted and the best solution among these three techniques is presented.

Model correlation and damage location for large space truss structures: Secant method development and evaluation

NASA Technical Reports Server (NTRS)

Smith, Suzanne Weaver; Beattie, Christopher A.

1991-01-01

On-orbit testing of a large space structure will be required to complete the certification of any mathematical model for the structure dynamic response. The process of establishing a mathematical model that matches measured structure response is referred to as model correlation. Most model correlation approaches have an identification technique to determine structural characteristics from the measurements of the structure response. This problem is approached with one particular class of identification techniques - matrix adjustment methods - which use measured data to produce an optimal update of the structure property matrix, often the stiffness matrix. New methods were developed for identification to handle problems of the size and complexity expected for large space structures. Further development and refinement of these secant-method identification algorithms were undertaken. Also, evaluation of these techniques is an approach for model correlation and damage location was initiated.

Teaching German with TPRS.

ERIC Educational Resources Information Center

Davidheiser, James

2002-01-01

Outlines the research leading to Total Physical Response (TRP) and later Total Physical Response Storytelling (TPRS) methods. Discusses the day-to-day use in the German classroom of TPRS by an experienced practitioner and explains the reasons for its success. Presents student evaluations of the method and the material available for its use. (AS)

Physiological responses of bacteria in biofilms to disinfection.

PubMed Central

Yu, F P; McFeters, G A

1994-01-01

In situ enumeration methods using fluorescent probes and a radioisotope labelling technique were applied to evaluate physiological changes of Klebsiella pneumoniae within biofilms after disinfection treatment. Chlorine (0.25 mg of free chlorine per liter [pH 7.2]) and monochloramine (1 mg/liter [pH 9.0]) were employed as disinfectants in the study. Two fluorgenic compounds, 5-cyano-2,3-ditolyl tetrazolium chloride and rhodamine 123, and tritiated uridine incorporation were chosen for assessment of physiological activities. Results obtained by these methods were compared with those from the plate count and direct viable count methods. 5-Cyano-2,3-ditolyl tetrazolium chloride is an indicator of bacterial respiratory activity, rhodamine 123 is incorporated into bacteria in response to transmembrane potential, and the incorporation of uridine represents the global RNA turnover rate. The results acquired by these methods following disinfection exposure showed a range of responses and suggested different physiological reactions in biofilms exposed to chlorine and monochloramine. The direct viable count response and respiratory activity were affected more by disinfection than were the transmembrane potential and RNA turnover rate on the basis of comparable efficiency as evaluated by plate count enumeration. Information revealed by these approaches can provide different physiological insights that may be used in evaluating the efficacy of biofilm disinfection. PMID:8074525

The evaluation of distributed damage in concrete based on sinusoidal modeling of the ultrasonic response.

PubMed

Sepehrinezhad, Alireza; Toufigh, Vahab

2018-05-25

Ultrasonic wave attenuation is an effective descriptor of distributed damage in inhomogeneous materials. Methods developed to measure wave attenuation have the potential to provide an in-site evaluation of existing concrete structures insofar as they are accurate and time-efficient. In this study, material classification and distributed damage evaluation were investigated based on the sinusoidal modeling of the response from the through-transmission ultrasonic tests on polymer concrete specimens. The response signal was modeled as single or the sum of damping sinusoids. Due to the inhomogeneous nature of concrete materials, model parameters may vary from one specimen to another. Therefore, these parameters are not known in advance and should be estimated while the response signal is being received. The modeling procedure used in this study involves a data-adaptive algorithm to estimate the parameters online. Data-adaptive algorithms are used due to a lack of knowledge of the model parameters. The damping factor was estimated as a descriptor of the distributed damage. The results were compared in two different cases as follows: (1) constant excitation frequency with varying concrete mixtures and (2) constant mixture with varying excitation frequencies. The specimens were also loaded up to their ultimate compressive strength to investigate the effect of distributed damage in the response signal. The results of the estimation indicated that the damping was highly sensitive to the change in material inhomogeneity, even in comparable mixtures. In addition to the proposed method, three methods were employed to compare the results based on their accuracy in the classification of materials and the evaluation of the distributed damage. It is shown that the estimated damping factor is not only sensitive to damage in the final stages of loading, but it is also applicable in evaluating micro damages in the earlier stages providing a reliable descriptor of damage. In addition, the modified amplitude ratio method is introduced as an improvement of the classical method. The proposed methods were validated to be effective descriptors of distributed damage. The presented models were also in good agreement with the experimental data. Copyright © 2018 Elsevier B.V. All rights reserved.

Evaluation of different methods used to assess disease activity in rheumatoid arthritis: analyses of abatacept clinical trial data

PubMed Central

Dougados, M; Schmidely, N; Le Bars, M; Lafosse, C; Schiff, M; Smolen, J S; Aletaha, D; van Riel, P; Wells, G

2009-01-01

Objectives: To evaluate different methods of reporting response to treatment or disease status for their ability to discriminate between active therapy and placebo, or to reflect structural progression or patient satisfaction with treatment using an exploratory analysis of the Abatacept in Inadequate Responders to Methotrexate (AIM) trial. Methods: 424 active (abatacept ∼10 mg/kg) and 214 placebo-treated patients with rheumatoid arthritis (RA) were evaluated. Methods of reporting included: (1) response (American College of Rheumatology (ACR) criteria) versus state (disease activity score in 28 joints (DAS28) criteria); (2) stringency (ACR20 vs 50 vs 70; moderate disease activity state (MDAS; DAS28 <5.1) vs low disease activity state (LDAS; DAS28 ⩽3.2) vs DAS28-defined remission (DAS28 <2.6)); (3) time to onset (time to first ACR50/LDAS) and (4) sustainability of ACR50/LDAS for consecutive visits. Methods were assessed according to: (1) discriminatory capacity (number of patients needed to study (NNS)); (2) structural progression (Genant-modified Sharp score) and (3) patient satisfaction with treatment. Positive likelihood ratios (LR) evaluated the ability of the above methods to reflect structural damage and patient satisfaction. Results: MDAS and ACR20 had the highest discriminatory capacity (NNS 49 and 69). Sustained LDAS best reflected no radiographic progression (positive LR ⩾2). More stringent criteria (at least ACR50/LDAS), faster onset (⩽3 months) and sustainability (>3 visits) of ACR50/LDAS best reflected patient satisfaction (positive LR >10). Conclusions: The optimal method for reporting a measure of disease activity may differ depending on the outcome of interest. Time to onset and sustainability can be important factors when evaluating treatment response and disease status in patients with RA. PMID:19074177

Evaluation of the Inertial Response of Variable-Speed Wind Turbines Using Advanced Simulation: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scholbrock, Andrew K; Muljadi, Eduard; Gevorgian, Vahan

In this paper, we focus on the temporary frequency support effect provided by wind turbine generators (WTGs) through the inertial response. With the implemented inertial control methods, the WTG is capable of increasing its active power output by releasing parts of the stored kinetic energy when the frequency excursion occurs. The active power can be boosted temporarily above the maximum power points, but the rotor speed deceleration follows and an active power output deficiency occurs during the restoration of rotor kinetic energy. In this paper, we evaluate and compare the inertial response induced by two distinct inertial control methods usingmore » advanced simulation. In the first stage, the proposed inertial control methods are analyzed in offline simulation. Using an advanced wind turbine simulation program, FAST with TurbSim, the response of the researched wind turbine is comprehensively evaluated under turbulent wind conditions, and the impact on the turbine mechanical components are assessed. In the second stage, the inertial control is deployed on a real 600-kW wind turbine, the three-bladed Controls Advanced Research Turbine, which further verifies the inertial control through a hardware-in-the-loop simulation. Various inertial control methods can be effectively evaluated based on the proposed two-stage simulation platform, which combines the offline simulation and real-time hardware-in-the-loop simulation. The simulation results also provide insights in designing inertial control for WTGs.« less

Controlling Response Shift Bias: The Use of the Retrospective Pre-Test Design in the Evaluation of a Master's Programme

ERIC Educational Resources Information Center

Drennan, Jonathan; Hyde, Abbey

2008-01-01

Traditionally the measures used to evaluate the impact of an educational programme on student outcomes and the extent to which students change is a comparison of the student's pre-test scores with his/her post-test scores. However, this method of evaluating change may be problematic due to the confounding factor of response shift bias when student…

Extreme Response Style: Which Model Is Best?

ERIC Educational Resources Information Center

Leventhal, Brian

2017-01-01

More robust and rigorous psychometric models, such as multidimensional Item Response Theory models, have been advocated for survey applications. However, item responses may be influenced by construct-irrelevant variance factors such as preferences for extreme response options. Through empirical and simulation methods, this study evaluates the use…

A New Procedure for Detection of Students' Rapid Guessing Responses Using Response Time

ERIC Educational Resources Information Center

Guo, Hongwen; Rios, Joseph A.; Haberman, Shelby; Liu, Ou Lydia; Wang, Jing; Paek, Insu

2016-01-01

Unmotivated test takers using rapid guessing in item responses can affect validity studies and teacher and institution performance evaluation negatively, making it critical to identify these test takers. The authors propose a new nonparametric method for finding response-time thresholds for flagging item responses that result from rapid-guessing…

99mTc-sestamibi scintigraphy used to evaluate tumor response to neoadjuvant chemotherapy in locally advanced breast cancer: A quantitative analysis

PubMed Central

KOGA, KATIA HIROMOTO; MORIGUCHI, SONIA MARTA; NETO, JORGE NAHÁS; PERES, STELA VERZINHASSE; SILVA, EDUARDO TINÓIS DA; SARRI, ALMIR JOSÉ; MICHELIN, ODAIR CARLITO; MARQUES, MARIANGELA ESTHER ALENCAR; GRIVA, BEATRIZ LOTUFO

2010-01-01

To evaluate the tumor response to neoadjuvant chemotherapy, 99mTc-sestamibi breast scintigraphy was proposed as a quantitative method. Fifty-five patients with ductal carcinoma were studied. They underwent breast scintigraphy before and after neoadjuvant chemotherapy, along with clinical assessment and surgical specimen analysis. The regions of interest on the lesion and contralateral breast were identified, and the pixel counts were used to evaluate lesion uptake in relation to background radiation. The ratio of these counts before to after neoadjuvant chemotherapy was assessed. The decrease in uptake rate due to chemotherapy characterized the scintigraphy tumor response. The Kruskal-Wallis test was used to compare the mean scintigraphic tumor response and histological type. Dunn’s multiple comparison test was used to detect differences between histological types. The Mann-Whitney test was used to compare means between quantitative and qualitative variables: scintigraphic tumor response vs. clinical response and uptake before chemotherapy vs. scintigraphic tumor response. The Spearman’s test was used to correlate the quantitative variables of clinical reduction in tumor size and scintigraphic tumor response. All of the variables compared presented significant differences. The change in 99mTc-sestamibi uptake noted on breast scintigraphy, before to after neoadjuvant chemotherapy, may be used as an effective method for evaluating the response to neoadjuvant chemotherapy, since this quantification reflects the biological behavior of the tumor towards the chemotherapy regimen. Furthermore, additional analysis on the uptake rate before chemotherapy may accurately predict treatment response. PMID:22966312

Educational Evaluation: Analysis and Responsibility.

ERIC Educational Resources Information Center

Apple, Michael W., Ed.; And Others

This book presents controversial aspects of evaluation and aims at broadening perspectives and insights in the evaluation field. Chapter 1 criticizes modes of evaluation and the basic rationality behind them and focuses on assumptions that have problematic consequences. Chapter 2 introduces concepts of evaluation and examines methods of grading…

Flexible methods for segmentation evaluation: results from CT-based luggage screening.

PubMed

Karimi, Seemeen; Jiang, Xiaoqian; Cosman, Pamela; Martz, Harry

2014-01-01

Imaging systems used in aviation security include segmentation algorithms in an automatic threat recognition pipeline. The segmentation algorithms evolve in response to emerging threats and changing performance requirements. Analysis of segmentation algorithms' behavior, including the nature of errors and feature recovery, facilitates their development. However, evaluation methods from the literature provide limited characterization of the segmentation algorithms. To develop segmentation evaluation methods that measure systematic errors such as oversegmentation and undersegmentation, outliers, and overall errors. The methods must measure feature recovery and allow us to prioritize segments. We developed two complementary evaluation methods using statistical techniques and information theory. We also created a semi-automatic method to define ground truth from 3D images. We applied our methods to evaluate five segmentation algorithms developed for CT luggage screening. We validated our methods with synthetic problems and an observer evaluation. Both methods selected the same best segmentation algorithm. Human evaluation confirmed the findings. The measurement of systematic errors and prioritization helped in understanding the behavior of each segmentation algorithm. Our evaluation methods allow us to measure and explain the accuracy of segmentation algorithms.

Demand Response Resource Quantification with Detailed Building Energy Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hale, Elaine; Horsey, Henry; Merket, Noel

Demand response is a broad suite of technologies that enables changes in electrical load operations in support of power system reliability and efficiency. Although demand response is not a new concept, there is new appetite for comprehensively evaluating its technical potential in the context of renewable energy integration. The complexity of demand response makes this task difficult -- we present new methods for capturing the heterogeneity of potential responses from buildings, their time-varying nature, and metrics such as thermal comfort that help quantify likely acceptability of specific demand response actions. Computed with an automated software framework, the methods are scalable.

Relationships between response surfaces for tablet characteristics of placebo and API-containing tablets manufactured by direct compression method.

PubMed

Hayashi, Yoshihiro; Tsuji, Takahiro; Shirotori, Kaede; Oishi, Takuya; Kosugi, Atsushi; Kumada, Shungo; Hirai, Daijiro; Takayama, Kozo; Onuki, Yoshinori

2017-10-30

In this study, we evaluated the correlation between the response surfaces for the tablet characteristics of placebo and active pharmaceutical ingredient (API)-containing tablets. The quantities of lactose, cornstarch, and microcrystalline cellulose were chosen as the formulation factors. Ten tablet formulations were prepared. The tensile strength (TS) and disintegration time (DT) of tablets were measured as tablet characteristics. The response surfaces for TS and DT were estimated using a nonlinear response surface method incorporating multivariate spline interpolation, and were then compared with those of placebo tablets. A correlation was clearly observed for TS and DT of all APIs, although the value of the response surfaces for TS and DT was highly dependent on the type of API used. Based on this knowledge, the response surfaces for TS and DT of API-containing tablets were predicted from only two and four formulations using regression expression and placebo tablet data, respectively. The results from the evaluation of prediction accuracy showed that this method accurately predicted TS and DT, suggesting that it could construct a reliable response surface for TS and DT with a small number of samples. This technique assists in the effective estimation of the relationships between design variables and pharmaceutical responses during pharmaceutical development. Copyright © 2017 Elsevier B.V. All rights reserved.

A framework for evaluating the appropriateness of clinical decision support alerts and responses

PubMed Central

Waitman, Lemuel R; Lewis, Julia B; Wright, Julie A; Choma, David P; Miller, Randolph A; Peterson, Josh F

2011-01-01

Objective Alerting systems, a type of clinical decision support, are increasingly prevalent in healthcare, yet few studies have concurrently measured the appropriateness of alerts with provider responses to alerts. Recent reports of suboptimal alert system design and implementation highlight the need for better evaluation to inform future designs. The authors present a comprehensive framework for evaluating the clinical appropriateness of synchronous, interruptive medication safety alerts. Methods Through literature review and iterative testing, metrics were developed that describe successes, justifiable overrides, provider non-adherence, and unintended adverse consequences of clinical decision support alerts. The framework was validated by applying it to a medication alerting system for patients with acute kidney injury (AKI). Results Through expert review, the framework assesses each alert episode for appropriateness of the alert display and the necessity and urgency of a clinical response. Primary outcomes of the framework include the false positive alert rate, alert override rate, provider non-adherence rate, and rate of provider response appropriateness. Application of the framework to evaluate an existing AKI medication alerting system provided a more complete understanding of the process outcomes measured in the AKI medication alerting system. The authors confirmed that previous alerts and provider responses were most often appropriate. Conclusion The new evaluation model offers a potentially effective method for assessing the clinical appropriateness of synchronous interruptive medication alerts prior to evaluating patient outcomes in a comparative trial. More work can determine the generalizability of the framework for use in other settings and other alert types. PMID:21849334

A Program Evaluation of the Basic Supervisory Development Seminar

DTIC Science & Technology

1985-08-01

evaluation. - Hoyle , English, and Steffy (1985) describe various methods that can be used to accomplisn the appropriate objectives of the evaluation...Maynihan Figure 2 Alternative Methods of Assessing Student and Program Effectiveness ( Hoyle , English, and Steffy, 1985) 21 CHAPTER III METHODCLOGY S Design...Fiedler, Fred E. "Responses to Sergiovanni." Educational Leadership (March 1979), 394-96. Fiedler, Fred E., and Martin M. Chemers. Leadership and

Gauge invariance of excitonic linear and nonlinear optical response

NASA Astrophysics Data System (ADS)

Taghizadeh, Alireza; Pedersen, T. G.

2018-05-01

We study the equivalence of four different approaches to calculate the excitonic linear and nonlinear optical response of multiband semiconductors. These four methods derive from two choices of gauge, i.e., length and velocity gauges, and two ways of computing the current density, i.e., direct evaluation and evaluation via the time-derivative of the polarization density. The linear and quadratic response functions are obtained for all methods by employing a perturbative density-matrix approach within the mean-field approximation. The equivalence of all four methods is shown rigorously, when a correct interaction Hamiltonian is employed for the velocity gauge approaches. The correct interaction is written as a series of commutators containing the unperturbed Hamiltonian and position operators, which becomes equivalent to the conventional velocity gauge interaction in the limit of infinite Coulomb screening and infinitely many bands. As a case study, the theory is applied to hexagonal boron nitride monolayers, and the linear and nonlinear optical response found in different approaches are compared.

Applications of Generalized Derivatives to Viscoelasticity.

DTIC Science & Technology

1979-11-01

Integration Used to Evaluate the Inverse Transform 78 B-i Schematic of the Half-Space of Newtonian Fluid Bounded by a "Wetted" Surface 96 C-I The...of the response at discrete frequencies. The inverse transform of the response is evaluated numerically to produce the time history. The major drawback...of this method is the arduous task of calculating the inverse transform for every point in time at which the value of the response is required. The

Psychobiological responses to critically evaluated multitasking.

PubMed

Wetherell, Mark A; Craw, Olivia; Smith, Kenny; Smith, Michael A

2017-12-01

In order to understand psychobiological responses to stress it is necessary to observe how people react to controlled stressors. A range of stressors exist for this purpose; however, laboratory stressors that are representative of real life situations provide more ecologically valid opportunities for assessing stress responding. The current study assessed psychobiological responses to an ecologically valid laboratory stressor involving multitasking and critical evaluation. The stressor elicited significant increases in psychological and cardiovascular stress reactivity; however, no cortisol reactivity was observed. Other socially evaluative laboratory stressors that lead to cortisol reactivity typically require a participant to perform tasks that involve verbal responses, whilst standing in front of evaluative others. The current protocol contained critical evaluation of cognitive performance; however, this was delivered from behind a seated participant. The salience of social evaluation may therefore be related to the response format of the task and the method of evaluation. That is, the current protocol did not involve the additional vulnerability associated with in person, face-to-face contact, and verbal delivery. Critical evaluation of multitasking provides an ecologically valid technique for inducing laboratory stress and provides an alternative tool for assessing psychological and cardiovascular reactivity. Future studies could additionally use this paradigm to investigate those components of social evaluation necessary for eliciting a cortisol response.

Evaluating the Reliability of Emergency Response Systems for Large-Scale Incident Operations

PubMed Central

Jackson, Brian A.; Faith, Kay Sullivan; Willis, Henry H.

2012-01-01

Abstract The ability to measure emergency preparedness—to predict the likely performance of emergency response systems in future events—is critical for policy analysis in homeland security. Yet it remains difficult to know how prepared a response system is to deal with large-scale incidents, whether it be a natural disaster, terrorist attack, or industrial or transportation accident. This research draws on the fields of systems analysis and engineering to apply the concept of system reliability to the evaluation of emergency response systems. The authors describe a method for modeling an emergency response system; identifying how individual parts of the system might fail; and assessing the likelihood of each failure and the severity of its effects on the overall response effort. The authors walk the reader through two applications of this method: a simplified example in which responders must deliver medical treatment to a certain number of people in a specified time window, and a more complex scenario involving the release of chlorine gas. The authors also describe an exploratory analysis in which they parsed a set of after-action reports describing real-world incidents, to demonstrate how this method can be used to quantitatively analyze data on past response performance. The authors conclude with a discussion of how this method of measuring emergency response system reliability could inform policy discussion of emergency preparedness, how system reliability might be improved, and the costs of doing so. PMID:28083267

Expert opinions on the acceptance of alternative methods in food safety evaluations: Formulating recommendations to increase acceptance of non-animal methods for kinetics.

PubMed

Punt, Ans; Bouwmeester, Hans; Schiffelers, Marie-Jeanne W A; Peijnenburg, Ad A C M

2018-02-01

Inclusion of alternative methods that replace, reduce, or refine (3R) animal testing within regulatory safety evaluations of chemicals generally faces many hurdles. The goal of the current work is to i) collect responses from key stakeholders involved in food safety evaluations on what they consider the most relevant factors that influence the acceptance and use of 3R methods and to ii) use these responses to formulate activities needed to increase the acceptance and use of 3R methods, particularly for kinetics. The stakeholders were contacted by e-mail for their opinions, asking the respondents to write down three barriers and/or drivers and scoring these by distributing 5 points over the three factors. The main barriers that obtained the highest aggregated scores were i) uncertain predictability 3R methods/lack of validation, ii) insufficient guidance regulators/industry and iii) insufficient harmonization of legislation. The major driver identified was the possibility of 3R methods to provide more mechanistic information. Based on the results, recommendations are given to enhance the acceptance and application of 3R toxicokinetic methods in food safety evaluations. These include steering of regulatory data requirements as well as creating (funding) opportunities for development and validation of alternative methods for kinetics and development of guidances. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

A SIMPLE AND RAPID MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME OF FLIGHT MASS SPECTROMETRY METHOD TO SCREEN FISH PLASMA SAMPLES FOR ESTROGEN-RESPONSIVE BIOMARKERS

EPA Science Inventory

In this study, we describe and evaluate the performance of a simple and rapid mass spectral method for screening fish plasma for estrogen-responsive biomarkers using matrix assisted laster desorption/ionization time of flight mass spectrometry (MALDI-TOF-MS) couopled with a short...

A Guide to Analyzing Message-Response Sequences and Group Interaction Patterns in Computer-Mediated Communication

ERIC Educational Resources Information Center

Jeong, Allan

2005-01-01

This paper proposes a set of methods and a framework for evaluating, modeling, and predicting group interactions in computer-mediated communication. The method of sequential analysis is described along with specific software tools and techniques to facilitate the analysis of message-response sequences. In addition, the Dialogic Theory and its…

Investigation of Missing Responses in Implementation of Cognitive Diagnostic Models

ERIC Educational Resources Information Center

Dai, Shenghai

2017-01-01

This dissertation is aimed at investigating the impact of missing data and evaluating the performance of five selected methods for handling missing responses in the implementation of Cognitive Diagnostic Models (CDMs). The five methods are: a) treating missing data as incorrect (IN), b) person mean imputation (PM), c) two-way imputation (TW), d)…

CD4 T-helper cell cytokine phenotypes and antibody response following tetanus toxoid booster immunization

USDA-ARS?s Scientific Manuscript database

Routine methods for enumerating antigen-specific T-helper cells may not identify low-frequency phenotypes such as Th2 cells. We compared methods of evaluating such responses to identify tetanus toxoid- (TT) specific Th1, Th2, Th17 and IL10+ cells. Eight healthy subjects were given a TT booster vacci...

Evaluation of an Automated Touch Typing System

ERIC Educational Resources Information Center

Diercks, Caroll J.

1977-01-01

Examines an alternative method for teaching typewriting skills--the Automated Instruction Touch Typing System, an individualized self-paced instructional method using the principles of response conditioning. (Author/RK)

Understanding the Effect of Response Rate and Class Size Interaction on Students Evaluation of Teaching in a Higher Education

ERIC Educational Resources Information Center

Al Kuwaiti, Ahmed; AlQuraan, Mahmoud; Subbarayalu, Arun Vijay

2016-01-01

Objective: This study aims to investigate the interaction between response rate and class size and its effects on students' evaluation of instructors and the courses offered at a higher education Institution in Saudi Arabia. Study Design: A retrospective study design was chosen. Methods: One thousand four hundred and forty four different courses…

Clinical relevance of KRAS mutation detection in metastatic colorectal cancer treated by Cetuximab plus chemotherapy

PubMed Central

Di Fiore, F; Blanchard, F; Charbonnier, F; Le Pessot, F; Lamy, A; Galais, M P; Bastit, L; Killian, A; Sesboüé, R; Tuech, J J; Queuniet, A M; Paillot, B; Sabourin, J C; Michot, F; Michel, P; Frebourg, T

2007-01-01

The predictive value of KRAS mutation in metastatic colorectal cancer (MCRC) patients treated with cetuximab plus chemotherapy has recently been suggested. In our study, 59 patients with a chemotherapy-refractory MCRC treated with cetuximab plus chemotherapy were included and clinical response was evaluated according to response evaluation criteria in solid tumours (RECIST). Tumours were screened for KRAS mutations using first direct sequencing, then two sensitive methods based on SNaPshot and PCR-ligase chain reaction (LCR) assays. Clinical response was evaluated according to gene mutations using the Fisher exact test. Times to progression (TTP) were calculated using the Kaplan–Meier method and compared with log-rank test. A KRAS mutation was detected in 22 out of 59 tumours and, in six cases, was missed by sequencing analysis but detected using the SNaPshot and PCR-LCR assays. Remarkably, no KRAS mutation was found in the 12 patients with clinical response. KRAS mutation was associated with disease progression (P=0.0005) and TTP was significantly decreased in mutated KRAS patients (3 vs 5.5 months, P=0.015). Our study confirms that KRAS mutation is highly predictive of a non-response to cetuximab plus chemotherapy in MCRC and highlights the need to use sensitive molecular methods, such as SNaPshot or PCR-LCR assays, to ensure an efficient mutation detection. PMID:17375050

Flexible methods for segmentation evaluation: Results from CT-based luggage screening

PubMed Central

Karimi, Seemeen; Jiang, Xiaoqian; Cosman, Pamela; Martz, Harry

2017-01-01

BACKGROUND Imaging systems used in aviation security include segmentation algorithms in an automatic threat recognition pipeline. The segmentation algorithms evolve in response to emerging threats and changing performance requirements. Analysis of segmentation algorithms’ behavior, including the nature of errors and feature recovery, facilitates their development. However, evaluation methods from the literature provide limited characterization of the segmentation algorithms. OBJECTIVE To develop segmentation evaluation methods that measure systematic errors such as oversegmentation and undersegmentation, outliers, and overall errors. The methods must measure feature recovery and allow us to prioritize segments. METHODS We developed two complementary evaluation methods using statistical techniques and information theory. We also created a semi-automatic method to define ground truth from 3D images. We applied our methods to evaluate five segmentation algorithms developed for CT luggage screening. We validated our methods with synthetic problems and an observer evaluation. RESULTS Both methods selected the same best segmentation algorithm. Human evaluation confirmed the findings. The measurement of systematic errors and prioritization helped in understanding the behavior of each segmentation algorithm. CONCLUSIONS Our evaluation methods allow us to measure and explain the accuracy of segmentation algorithms. PMID:24699346

Using classical test theory, item response theory, and Rasch measurement theory to evaluate patient-reported outcome measures: a comparison of worked examples.

PubMed

Petrillo, Jennifer; Cano, Stefan J; McLeod, Lori D; Coon, Cheryl D

2015-01-01

To provide comparisons and a worked example of item- and scale-level evaluations based on three psychometric methods used in patient-reported outcome development-classical test theory (CTT), item response theory (IRT), and Rasch measurement theory (RMT)-in an analysis of the National Eye Institute Visual Functioning Questionnaire (VFQ-25). Baseline VFQ-25 data from 240 participants with diabetic macular edema from a randomized, double-masked, multicenter clinical trial were used to evaluate the VFQ at the total score level. CTT, RMT, and IRT evaluations were conducted, and results were assessed in a head-to-head comparison. Results were similar across the three methods, with IRT and RMT providing more detailed diagnostic information on how to improve the scale. CTT led to the identification of two problematic items that threaten the validity of the overall scale score, sets of redundant items, and skewed response categories. IRT and RMT additionally identified poor fit for one item, many locally dependent items, poor targeting, and disordering of over half the response categories. Selection of a psychometric approach depends on many factors. Researchers should justify their evaluation method and consider the intended audience. If the instrument is being developed for descriptive purposes and on a restricted budget, a cursory examination of the CTT-based psychometric properties may be all that is possible. In a high-stakes situation, such as the development of a patient-reported outcome instrument for consideration in pharmaceutical labeling, however, a thorough psychometric evaluation including IRT or RMT should be considered, with final item-level decisions made on the basis of both quantitative and qualitative results. Copyright © 2015. Published by Elsevier Inc.

Evaluation of three methods of platelet labelling.

PubMed

Mortelmans, L; Verbruggen, A; De Roo, M; Vermylen, J

1986-07-01

The study of the kinetics of labelled platelets makes sense only when the platelets preserve their viability after separation and labelling. The separation and labelling procedures described in the manual of two producers of 111In-oxinate (Amersham, Mallinckrodt) have been evaluated by in vitro aggregation tests. The method of Mallinckrodt diminished the aggregation capacities of the thrombocytes. The labelled platelets with normal in vitro aggregation response (Amersham) were tested in vivo in 11 patients who underwent peripheral bypass surgery. The platelet half-life and the platelet accumulation on bypass grafts were checked one week post-operatively. Because of the poor in vivo response of both methods (exponential half-life curve and bad graft visualization), a third method was optimized in our laboratory with good in vitro and in vivo results in 12 patients.

A semi-analytical method to evaluate the dielectric response of a tokamak plasma accounting for drift orbit effects

NASA Astrophysics Data System (ADS)

Van Eester, Dirk

2005-03-01

A semi-analytical method is proposed to evaluate the dielectric response of a plasma to electromagnetic waves in the ion cyclotron domain of frequencies in a D-shaped but axisymmetric toroidal geometry. The actual drift orbit of the particles is accounted for. The method hinges on subdividing the orbit into elementary segments in which the integrations can be performed analytically or by tabulation, and it relies on the local book-keeping of the relation between the toroidal angular momentum and the poloidal flux function. Depending on which variables are chosen, the method allows computation of elementary building blocks for either the wave or the Fokker-Planck equation, but the accent is mainly on the latter. Two types of tangent resonance are distinguished.

The response dynamics of preferential choice.

PubMed

Koop, Gregory J; Johnson, Joseph G

2013-12-01

The ubiquity of psychological process models requires an increased degree of sophistication in the methods and metrics that we use to evaluate them. We contribute to this venture by capitalizing on recent work in cognitive science analyzing response dynamics, which shows that the bearing information processing dynamics have on intended action is also revealed in the motor system. This decidedly "embodied" view suggests that researchers are missing out on potential dependent variables with which to evaluate their models-those associated with the motor response that produces a choice. The current work develops a method for collecting and analyzing such data in the domain of decision making. We first validate this method using widely normed stimuli from the International Affective Picture System (Experiment 1), and demonstrate that curvature in response trajectories provides a metric of the competition between choice options. We next extend the method to risky decision making (Experiment 2) and develop predictions for three popular classes of process model. The data provided by response dynamics demonstrate that choices contrary to the maxim of risk seeking in losses and risk aversion in gains may be the product of at least one "online" preference reversal, and can thus begin to discriminate amongst the candidate models. Finally, we incorporate attentional data collected via eye-tracking (Experiment 3) to develop a formal computational model of joint information sampling and preference accumulation. In sum, we validate response dynamics for use in preferential choice tasks and demonstrate the unique conclusions afforded by response dynamics over and above traditional methods. Copyright © 2013 Elsevier Inc. All rights reserved.

A comparative evaluation of in-plane shear test methods for laminated graphite-epoxy composites

NASA Technical Reports Server (NTRS)

Morton, John; Ho, Henjen

1992-01-01

The objectives were to evaluate popular shear test methods for various forms of graphite-epoxy composite materials and to determine the shear response of graphite-epoxy composites with various forms of fiber architecture. Numerical and full-field experimental stress analyses were performed on four shear test configurations for unidirectional and bidirectional graphite-epoxy laminates to assess the uniformity and purity of the shear stress (strain) fields produced in the specimen test section and to determine the material in-plane shear modulus and shear response. The test methods were the 10 deg off-axis, the +/- 45 deg tension, the Iosipescu V-notch, and a compact U-notch specimen. Specimens were prepared from AS4/3501-6 graphite-epoxy panels, instrumented with conventional strain gage rosettes and with a cross-line moire grating, and loaded in a convenient testing machine. The shear responses obtained for each test method and the two methods of specimen instrumentation were compared. In a second phase of the program the shear responses obtained from Iosipescu V-notch beam specimens were determined for woven fabric geometries of different weave and fiber architectures. Again the responses of specimens obtained from strain gage rosettes and moire interferometry were compared. Additional experiments were performed on a bidirectional cruciform specimen which was also instrumented with strain gages and a moire grating.

Using of CBA Method for Evaluation of the Investments in the Link with Social Responsible Business

NASA Astrophysics Data System (ADS)

Mrvová, Ľubica; Vaňová, Jaromíra

2012-12-01

The paper presents knowledge from the area of economic efficiency assessment of the environmental investments, in the link with environmental management with context of social responsible business and their mutual connection, on the base of CBA method. CBA method creates basis for the software CBA1.1, which was created for the needs of business practise for the small and medium enterprises in the Slovak Republic.

Likelihood-based methods for evaluating principal surrogacy in augmented vaccine trials.

PubMed

Liu, Wei; Zhang, Bo; Zhang, Hui; Zhang, Zhiwei

2017-04-01

There is growing interest in assessing immune biomarkers, which are quick to measure and potentially predictive of long-term efficacy, as surrogate endpoints in randomized, placebo-controlled vaccine trials. This can be done under a principal stratification approach, with principal strata defined using a subject's potential immune responses to vaccine and placebo (the latter may be assumed to be zero). In this context, principal surrogacy refers to the extent to which vaccine efficacy varies across principal strata. Because a placebo recipient's potential immune response to vaccine is unobserved in a standard vaccine trial, augmented vaccine trials have been proposed to produce the information needed to evaluate principal surrogacy. This article reviews existing methods based on an estimated likelihood and a pseudo-score (PS) and proposes two new methods based on a semiparametric likelihood (SL) and a pseudo-likelihood (PL), for analyzing augmented vaccine trials. Unlike the PS method, the SL method does not require a model for missingness, which can be advantageous when immune response data are missing by happenstance. The SL method is shown to be asymptotically efficient, and it performs similarly to the PS and PL methods in simulation experiments. The PL method appears to have a computational advantage over the PS and SL methods.

Evaluating the use of drone photogrammetry for measurement of stream channel morphology and response to high flow events

NASA Astrophysics Data System (ADS)

Price, Katie; Ballow, William

2015-04-01

Traditional high-precision survey methods for stream channel measurement are labor-intensive and require wadeability or boat access to streams. These conditions limit the number of sites researchers are able to study and generally prohibit the possibility of repeat channel surveys to evaluate short-term fluctuations in channel morphology. In recent years, unmanned aerial vehicles (drones) equipped with photo and video capabilities have become widely available and affordable. Concurrently, developments in photogrammetric software offer unprecedented mapping and 3D rendering capabilities of drone-captured photography. In this study, we evaluate the potential use of drone-mounted cameras for detailed stream channel morphometric analysis. We used a relatively low-cost drone (DJI Phantom 2+ Vision) and commercially available, user friendly software (Agisoft Photscan) for photogrammetric analysis of drone-captured stream channel photography. Our test study was conducted on Proctor Creek, a highly responsive urban stream in Atlanta, Georgia, within the crystalline Piedmont region of the southeastern United States. As a baseline, we performed traditional high-precision survey methods to collect morphological measurements (e.g., bankfull and wetted width, bankfull and wetted thalweg depth) at 11 evenly-spaced transects, following USGS protocols along reaches of 20 times average channel width. We additionally used the drone to capture 200+ photos along the same reaches, concurrent with the channel survey. Using the photogrammetry software, we generated georeferenced 3D models of the stream channel, from which morphological measurements were derived from the 11 transects and compared with measurements from the traditional survey method. We additionally explored possibilities for novel morphometric characterization available from the continuous 3D surface, as an improvement on the limited number of detailed cross-sections available from standard methods. These results showed great promise for the drone photogrammetry methods, which encouraged the exploration of the possibility of repeat aerial surveys to evaluate channel response to high flow events. Repeat drone surveys were performed following a sequence of high-flow events in Proctor Creek to evaluate the possibility of using these methods for assessment of stream channel response to flooding.

Originality Detection Software in a Graduate Policy Course: A Mixed-Methods Evaluation of Plagiarism

ERIC Educational Resources Information Center

Dreuth Zeman, Laura; Steen, Julie A.; Metz Zeman, Natalie

2011-01-01

The authors used a mixed-methods approach to evaluate the use of Turnitin originality detection software in a graduate social work course. Qualitative analysis of student responses revealed positive and negative spent completing assignments, and the tone of the class. Quantitative analysis of students' originality scores indicated a short-term…

An Evaluation of a New Method of IRT Scaling

ERIC Educational Resources Information Center

Ragland, Shelley

2010-01-01

In order to be able to fairly compare scores derived from different forms of the same test within the Item Response Theory framework, all individual item parameters must be on the same scale. A new approach, the RPA method, which is based on transformations of predicted score distributions was evaluated here and was shown to produce results…

An NCME Instructional Module on Estimating Item Response Theory Models Using Markov Chain Monte Carlo Methods

ERIC Educational Resources Information Center

Kim, Jee-Seon; Bolt, Daniel M.

2007-01-01

The purpose of this ITEMS module is to provide an introduction to Markov chain Monte Carlo (MCMC) estimation for item response models. A brief description of Bayesian inference is followed by an overview of the various facets of MCMC algorithms, including discussion of prior specification, sampling procedures, and methods for evaluating chain…

Generation of the neutron response function of an NE213 scintillator for fusion applications

NASA Astrophysics Data System (ADS)

Binda, F.; Eriksson, J.; Ericsson, G.; Hellesen, C.; Conroy, S.; Nocente, M.; Sundén, E. Andersson; JET Contributors

2017-09-01

In this work we present a method to evaluate the neutron response function of an NE213 liquid scintillator. This method is particularly useful when the proton light yield function of the detector has not been measured, since it is based on a proton light yield function taken from literature, MCNPX simulations, measurements of gamma-rays from a calibration source and measurements of neutrons from fusion experiments with ohmic plasmas. The inclusion of the latter improves the description of the proton light yield function in the energy range of interest (around 2.46 MeV). We apply this method to an NE213 detector installed at JET, inside the radiation shielding of the magnetic proton recoil (MPRu) spectrometer, and present the results from the calibration along with some examples of application of the response function to perform neutron emission spectroscopy (NES) of fusion plasmas. We also investigate how the choice of the proton light yield function affects the NES analysis, finding that the result does not change significantly. This points to the fact that the method for the evaluation of the neutron response function is robust and gives reliable results.

Adaptive envelope protection methods for aircraft

NASA Astrophysics Data System (ADS)

Unnikrishnan, Suraj

Carefree handling refers to the ability of a pilot to operate an aircraft without the need to continuously monitor aircraft operating limits. At the heart of all carefree handling or maneuvering systems, also referred to as envelope protection systems, are algorithms and methods for predicting future limit violations. Recently, envelope protection methods that have gained more acceptance, translate limit proximity information to its equivalent in the control channel. Envelope protection algorithms either use very small prediction horizon or are static methods with no capability to adapt to changes in system configurations. Adaptive approaches maximizing prediction horizon such as dynamic trim, are only applicable to steady-state-response critical limit parameters. In this thesis, a new adaptive envelope protection method is developed that is applicable to steady-state and transient response critical limit parameters. The approach is based upon devising the most aggressive optimal control profile to the limit boundary and using it to compute control limits. Pilot-in-the-loop evaluations of the proposed approach are conducted at the Georgia Tech Carefree Maneuver lab for transient longitudinal hub moment limit protection. Carefree maneuvering is the dual of carefree handling in the realm of autonomous Uninhabited Aerial Vehicles (UAVs). Designing a flight control system to fully and effectively utilize the operational flight envelope is very difficult. With the increasing role and demands for extreme maneuverability there is a need for developing envelope protection methods for autonomous UAVs. In this thesis, a full-authority automatic envelope protection method is proposed for limit protection in UAVs. The approach uses adaptive estimate of limit parameter dynamics and finite-time horizon predictions to detect impending limit boundary violations. Limit violations are prevented by treating the limit boundary as an obstacle and by correcting nominal control/command inputs to track a limit parameter safe-response profile near the limit boundary. The method is evaluated using software-in-the-loop and flight evaluations on the Georgia Tech unmanned rotorcraft platform---GTMax. The thesis also develops and evaluates an extension for calculating control margins based on restricting limit parameter response aggressiveness near the limit boundary.

Evaluation of Methods for In-Situ Calibration of Field-Deployable Microphone Phased Arrays

NASA Technical Reports Server (NTRS)

Humphreys, William M.; Lockard, David P.; Khorrami, Mehdi R.; Culliton, William G.; McSwain, Robert G.

2017-01-01

Current field-deployable microphone phased arrays for aeroacoustic flight testing require the placement of hundreds of individual sensors over a large area. Depending on the duration of the test campaign, the microphones may be required to stay deployed at the testing site for weeks or even months. This presents a challenge in regards to tracking the response (i.e., sensitivity) of the individual sensors as a function of time in order to evaluate the health of the array. To address this challenge, two different methods for in-situ tracking of microphone responses are described. The first relies on the use of an aerial sound source attached as a payload on a hovering small Unmanned Aerial System (sUAS) vehicle. The second relies on the use of individually excited ground-based sound sources strategically placed throughout the array pattern. Testing of the two methods was performed in microphone array deployments conducted at Fort A.P. Hill in 2015 and at Edwards Air Force Base in 2016. The results indicate that the drift in individual sensor responses can be tracked reasonably well using both methods. Thus, in-situ response tracking methods are useful as a diagnostic tool for monitoring the health of a phased array during long duration deployments.

Evaluating Active Parental Consent Procedures for School Programming: Addressing the Sensitive Topic of Suicide Prevention.

PubMed

Totura, Christine M Wienke; Kutash, Krista; Labouliere, Christa D; Karver, Marc S

2017-02-01

Suicide is the second leading cause of death for adolescents. Whereas school-based prevention programs are effective, obtaining active consent for youth participation in public health programming concerning sensitive topics is challenging. We explored several active consent procedures for improving participation rates. Five active consent methods (in-person, students taking forms home, mailing, mailing preceded by primers, mailing followed by reminder calls) were compared against passive consent procedures to evaluate recruitment success, as determined by participation (proportion who responded yes) and response (proportion who returned any response) rates. Participation acceptance rates ranged from 38 to 100% depending on consent method implemented. Compared with passive consent, active consent procedures were more variable in response and participation rates. In-person methods provided higher rates than less interpersonal methods, such as mailing or students taking consents home. Mailed primers before or reminder calls after consent forms were mailed increased response but not participation rates. Students taking consents home resulted in the lowest rates. Although passive consent produces the highest student participation, these methods are not always appropriate for programs addressing sensitive topics in schools. In-person active consent procedures may be the best option when prioritizing balance between parental awareness and successful student recruitment. © 2017, American School Health Association.

Stress responses to repeated exposure to a combined physical and social evaluative laboratory stressor in young healthy males.

PubMed

Boyle, N B; Lawton, C; Arkbåge, K; West, S G; Thorell, L; Hofman, D; Weeks, A; Myrissa, K; Croden, F; Dye, L

2016-01-01

Repeated exposure to homotypic laboratory psychosocial stressors typically instigates rapid habituation in hypothalamic-pituitary-adrenal (HPA) axis-mediated stress responses in humans. However, emerging evidence suggests the combination of physical stress and social evaluative threat may be sufficient to attenuate this response habituation. Neuroendocrine, cardiovascular and subjective stress responses following repeated exposure to a combined physical and social evaluative stress protocol were assessed to examine the habituation response dynamic in this context. The speech task of the Trier social stress test (TSST; Kirschbaum et al., 1993) and the socially evaluated cold pressor task (SECPT; Schwabe et al., 2008) were administered in a combined stressor protocol. Salivary cortisol, cardiovascular and subjective stress responses to a non-stress control and repeat stressor exposure separated by six weeks were examined in males (N=24) in a crossover manner. Stressor exposure resulted in significant elevations in all stress parameters. In contrast to the commonly reported habituation in cortisol response, a comparable post-stress response was demonstrated. Cortisol, heart rate and subjective stress responses were also characterised by a heightened response in anticipation to repeated stress exposure. Blood pressure responses were comparatively uniform across repeated exposures. Findings suggest a combined physical and social evaluative stressor is a potentially useful method for study designs that require repeated presentation of a homotypic stressor. Copyright © 2015 Elsevier Ltd. All rights reserved.

Estimating sub-surface dispersed oil concentration using acoustic backscatter response.

PubMed

Fuller, Christopher B; Bonner, James S; Islam, Mohammad S; Page, Cheryl; Ojo, Temitope; Kirkey, William

2013-05-15

The recent Deepwater Horizon disaster resulted in a dispersed oil plume at an approximate depth of 1000 m. Several methods were used to characterize this plume with respect to concentration and spatial extent including surface supported sampling and autonomous underwater vehicles with in situ instrument payloads. Additionally, echo sounders were used to track the plume location, demonstrating the potential for remote detection using acoustic backscatter (ABS). This study evaluated use of an Acoustic Doppler Current Profiler (ADCP) to quantitatively detect oil-droplet suspensions from the ABS response in a controlled laboratory setting. Results from this study showed log-linear ABS responses to oil-droplet volume concentration. However, the inability to reproduce ABS response factors suggests the difficultly in developing meaningful calibration factors for quantitative field analysis. Evaluation of theoretical ABS intensity derived from the particle size distribution provided insight regarding method sensitivity in the presence of interfering ambient particles. Copyright © 2013 Elsevier Ltd. All rights reserved.

Surveys of Health Professions Trainees: Prevalence, Response Rates, and Predictive Factors to Guide Researchers.

PubMed

Phillips, Andrew W; Friedman, Benjamin T; Utrankar, Amol; Ta, Andrew Q; Reddy, Shalini T; Durning, Steven J

2017-02-01

To establish a baseline overall response rate for surveys of health professions trainees, determine strategies associated with improved response rates, and evaluate for the presence of nonresponse bias. The authors performed a comprehensive analysis of all articles published in Academic Medicine, Medical Education, and Advances in Health Sciences Education in 2013, recording response rates. Additionally, they reviewed nonresponse bias analyses and factors suggested in other fields to affect response rate including survey delivery method, prenotification, and incentives. The search yielded 732 total articles; of these, 356 were research articles, and of these, 185 (52.0%) used at least one survey. Of these, 66 articles (35.6%) met inclusion criteria and yielded 73 unique surveys. Of the 73 surveys used, investigators reported a response rate for 63.0% of them; response rates ranged from 26.6% to 100%, mean (standard deviation) 71.3% (19.5%). Investigators reported using incentives for only 16.4% of the 73 surveys. The only survey methodology factor significantly associated with response rate was single- vs. multi-institutional surveys (respectively, 74.6% [21.2%] vs. 62.0% [12.8%], P = .022). Notably, statistical power for all analyses was limited. No articles evaluated for nonresponse bias. Approximately half of the articles evaluated used a survey as part of their methods. Limited data are available to establish a baseline response rate among health professions trainees and inform researchers which strategies are associated with higher response rates. Journals publishing survey-based health professions education research should improve reporting of response rate, nonresponse bias, and other survey factors.

Assessment of Primary Site Response in Children With High-Risk Neuroblastoma: An International Multicenter Study

PubMed Central

McHugh, Kieran; Naranjo, Arlene; Van Ryn, Collin; Kirby, Chaim; Brock, Penelope; Lyons, Karen A.; States, Lisa J.; Rojas, Yesenia; Miller, Alexandra; Volchenboum, Sam L.; Simon, Thorsten; Krug, Barbara; Sarnacki, Sabine; Valteau-Couanet, Dominique; von Schweinitz, Dietrich; Kammer, Birgit; Granata, Claudio; Pio, Luca; Park, Julie R.; Nuchtern, Jed

2016-01-01

Purpose The International Neuroblastoma Response Criteria (INRC) require serial measurements of primary tumors in three dimensions, whereas the Response Evaluation Criteria in Solid Tumors (RECIST) require measurement in one dimension. This study was conducted to identify the preferred method of primary tumor response assessment for use in revised INRC. Patients and Methods Patients younger than 20 years with high-risk neuroblastoma were eligible if they were diagnosed between 2000 and 2012 and if three primary tumor measurements (antero-posterior, width, cranio-caudal) were recorded at least twice before resection. Responses were defined as ≥ 30% reduction in longest dimension as per RECIST, ≥ 50% reduction in volume as per INRC, or ≥ 65% reduction in volume. Results Three-year event-free survival for all patients (N = 229) was 44% and overall survival was 58%. The sensitivity of both volume response measures (ability to detect responses in patients who survived) exceeded the sensitivity of the single dimension measure, but the specificity of all response measures (ability to identify lack of response in patients who later died) was low. In multivariable analyses, none of the response measures studied was predictive of outcome, and none was predictive of the extent of resection. Conclusion None of the methods of primary tumor response assessment was predictive of outcome. Measurement of three dimensions followed by calculation of resultant volume is more complex than measurement of a single dimension. Primary tumor response in children with high-risk neuroblastoma should therefore be evaluated in accordance with RECIST criteria, using the single longest dimension. PMID:26755515

Applications of Response Surface-Based Methods to Noise Analysis in the Conceptual Design of Revolutionary Aircraft

NASA Technical Reports Server (NTRS)

Hill, Geoffrey A.; Olson, Erik D.

2004-01-01

Due to the growing problem of noise in today's air transportation system, there have arisen needs to incorporate noise considerations in the conceptual design of revolutionary aircraft. Through the use of response surfaces, complex noise models may be converted into polynomial equations for rapid and simplified evaluation. This conversion allows many of the commonly used response surface-based trade space exploration methods to be applied to noise analysis. This methodology is demonstrated using a noise model of a notional 300 passenger Blended-Wing-Body (BWB) transport. Response surfaces are created relating source noise levels of the BWB vehicle to its corresponding FAR-36 certification noise levels and the resulting trade space is explored. Methods demonstrated include: single point analysis, parametric study, an optimization technique for inverse analysis, sensitivity studies, and probabilistic analysis. Extended applications of response surface-based methods in noise analysis are also discussed.

Thinking Differentially: A Response to Issues in Differential Response

ERIC Educational Resources Information Center

Fluke, John D.; Merkel-Holguin, Lisa; Schene, Patricia

2013-01-01

This is a response to the document by Hughes et al. in this issue that offers a critique of the status of differential response (DR). We find the document to be helpful in intent, but do not find that it reflects scientifically sound methods, and contains many mischaracterizations of the status, impetus, research, and evaluation of DR to date. We…

The Role of Applied Epidemiology Methods in the Disaster Management Cycle

PubMed Central

Heumann, Michael; Perrotta, Dennis; Wolkin, Amy F.; Schnall, Amy H.; Podgornik, Michelle N.; Cruz, Miguel A.; Horney, Jennifer A.; Zane, David; Roisman, Rachel; Greenspan, Joel R.; Thoroughman, Doug; Anderson, Henry A.; Wells, Eden V.; Simms, Erin F.

2014-01-01

Disaster epidemiology (i.e., applied epidemiology in disaster settings) presents a source of reliable and actionable information for decision-makers and stakeholders in the disaster management cycle. However, epidemiological methods have yet to be routinely integrated into disaster response and fully communicated to response leaders. We present a framework consisting of rapid needs assessments, health surveillance, tracking and registries, and epidemiological investigations, including risk factor and health outcome studies and evaluation of interventions, which can be practiced throughout the cycle. Applying each method can result in actionable information for planners and decision-makers responsible for preparedness, response, and recovery. Disaster epidemiology, once integrated into the disaster management cycle, can provide the evidence base to inform and enhance response capability within the public health infrastructure. PMID:25211748

Measures of fish behavior as indicators of sublethal toxicosis during standard toxicity tests

USGS Publications Warehouse

Little, E.E.; DeLonay, A.J.

1996-01-01

Behavioral functions essential for growth and survival can be dramatically altered by sublethal exposure to toxicants. Measures of these behavioral responses are effective in detecting adverse effects of sublethal contaminant exposure. Behavioral responses of fishes can be qualitatively and quantitatively evaluated during routine toxicity tests. At selected intervals of exposure, qualitative evaluations are accomplished through direct observations, whereas video recordings are used for quantitative evaluations. Standardized procedures for behavioral evaluation are readily applicable to different fish species and provide rapid, sensitive, and ecologically relevant assessments of sublethal exposure. The methods are readily applied to standardized test protocols.

SU-C-207B-06: Comparison of Registration Methods for Modeling Pathologic Response of Esophageal Cancer to Chemoradiation Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riyahi, S; Choi, W; Bhooshan, N

2016-06-15

Purpose: To compare linear and deformable registration methods for evaluation of tumor response to Chemoradiation therapy (CRT) in patients with esophageal cancer. Methods: Linear and multi-resolution BSpline deformable registration were performed on Pre-Post-CRT CT/PET images of 20 patients with esophageal cancer. For both registration methods, we registered CT using Mean Square Error (MSE) metric, however to register PET we used transformation obtained using Mutual Information (MI) from the same CT due to being multi-modality. Similarity of Warped-CT/PET was quantitatively evaluated using Normalized Mutual Information and plausibility of DF was assessed using inverse consistency Error. To evaluate tumor response four groupsmore » of tumor features were examined: (1) Conventional PET/CT e.g. SUV, diameter (2) Clinical parameters e.g. TNM stage, histology (3)spatial-temporal PET features that describe intensity, texture and geometry of tumor (4)all features combined. Dominant features were identified using 10-fold cross-validation and Support Vector Machine (SVM) was deployed for tumor response prediction while the accuracy was evaluated by ROC Area Under Curve (AUC). Results: Average and standard deviation of Normalized mutual information for deformable registration using MSE was 0.2±0.054 and for linear registration was 0.1±0.026, showing higher NMI for deformable registration. Likewise for MI metric, deformable registration had 0.13±0.035 comparing to linear counterpart with 0.12±0.037. Inverse consistency error for deformable registration for MSE metric was 4.65±2.49 and for linear was 1.32±2.3 showing smaller value for linear registration. The same conclusion was obtained for MI in terms of inverse consistency error. AUC for both linear and deformable registration was 1 showing no absolute difference in terms of response evaluation. Conclusion: Deformable registration showed better NMI comparing to linear registration, however inverse consistency of transformation was lower in linear registration. We do not expect to see significant difference when warping PET images using deformable or linear registration. This work was supported in part by the National Cancer Institute Grants R01CA172638.« less

Introduction to Multilevel Item Response Theory Analysis: Descriptive and Explanatory Models

ERIC Educational Resources Information Center

Sulis, Isabella; Toland, Michael D.

2017-01-01

Item response theory (IRT) models are the main psychometric approach for the development, evaluation, and refinement of multi-item instruments and scaling of latent traits, whereas multilevel models are the primary statistical method when considering the dependence between person responses when primary units (e.g., students) are nested within…

Aerial Refueling Simulator Validation Using Operational Experimentation and Response Surface Methods with Time Series Responses

DTIC Science & Technology

2013-03-21

10 2.3 Time Series Response Data ................................................................................. 12 2.4 Comparison of Response...to 12 evaluating the efficiency of the parameter estimates. In the past, the most popular form of response surface design used the D-optimality...as well. A model can refer to almost anything in math , statistics, or computer science. It can be any “physical, mathematical, or logical

Wargame Simulation Theory and Evaluation Method for Emergency Evacuation of Residents from Urban Waterlogging Disaster Area

PubMed Central

Chen, Peng; Zhang, Jiquan; Sun, Yingyue; Liu, Xiaojing

2016-01-01

Urban waterlogging seriously threatens the safety of urban residents and properties. Wargame simulation research on resident emergency evacuation from waterlogged areas can determine the effectiveness of emergency response plans for high risk events at low cost. Based on wargame theory and emergency evacuation plans, we used a wargame exercise method, incorporating qualitative and quantitative aspects, to build an urban waterlogging disaster emergency shelter using a wargame exercise and evaluation model. The simulation was empirically tested in Daoli District of Harbin. The results showed that the wargame simulation scored 96.40 points, evaluated as good. From the simulation results, wargame simulation of urban waterlogging emergency procedures for disaster response can improve the flexibility and capacity for command, management and decision-making in emergency management departments. PMID:28009805

Models for evaluating the performability of degradable computing systems

NASA Technical Reports Server (NTRS)

Wu, L. T.

1982-01-01

Recent advances in multiprocessor technology established the need for unified methods to evaluate computing systems performance and reliability. In response to this modeling need, a general modeling framework that permits the modeling, analysis and evaluation of degradable computing systems is considered. Within this framework, several user oriented performance variables are identified and shown to be proper generalizations of the traditional notions of system performance and reliability. Furthermore, a time varying version of the model is developed to generalize the traditional fault tree reliability evaluation methods of phased missions.

Forensic Evaluation of Deaf Individuals: Challenges and Strategies.

PubMed

Pollard, Robert Q; Berlinski, Brian T

2017-01-01

Forensic evaluation of deaf individuals presents unique challenges due to many examinees' fund of information deficits, potential for language deprivation, and examiners' frequent lack of creativity regarding communication methods. This article describes challenges most frequently encountered in competency to stand trial and criminal responsibility evaluations and offers strategies for overcoming them. The value of employing multiple communication methods, especially the use of illustrations, is emphasized. Suggestions also are offered regarding preparing evaluation reports and effectively communicating "key deaf fundamentals" to legal personnel. Encouragement is offered for qualified, sign-fluent professionals to engage in forensic work.

Optimization of the beam shaping assembly in the D-D neutron generators-based BNCT using the response matrix method.

PubMed

Kasesaz, Y; Khalafi, H; Rahmani, F

2013-12-01

Optimization of the Beam Shaping Assembly (BSA) has been performed using the MCNP4C Monte Carlo code to shape the 2.45 MeV neutrons that are produced in the D-D neutron generator. Optimal design of the BSA has been chosen by considering in-air figures of merit (FOM) which consists of 70 cm Fluental as a moderator, 30 cm Pb as a reflector, 2mm (6)Li as a thermal neutron filter and 2mm Pb as a gamma filter. The neutron beam can be evaluated by in-phantom parameters, from which therapeutic gain can be derived. Direct evaluation of both set of FOMs (in-air and in-phantom) is very time consuming. In this paper a Response Matrix (RM) method has been suggested to reduce the computing time. This method is based on considering the neutron spectrum at the beam exit and calculating contribution of various dose components in phantom to calculate the Response Matrix. Results show good agreement between direct calculation and the RM method. Copyright © 2013 Elsevier Ltd. All rights reserved.

Student Evaluation of Instruction: Comparison between In-Class and Online Methods

ERIC Educational Resources Information Center

Capa-Aydin, Yesim

2016-01-01

This study compares student evaluations of instruction that were collected in-class with those gathered through an online survey. The two modes of administration were compared with respect to response rate, psychometric characteristics and mean ratings through different statistical analyses. Findings indicated that in-class evaluations produced a…

Linguistic Models of FO Use, Physiological Models of FO Control, and the Issue of "Mean Response Time."

ERIC Educational Resources Information Center

Herman, Rebecca; Beckman, Mary; Honda, Kiyoshi

1999-01-01

Evaluates "mean response time" (MRT), a method used in previous studies to relate physiological evidence (recordings of electromyographic activity in the cricothyroid and sternohyoid) to acoustic evidence (fundamental frequency). (Author/VWL)

Study on the application of ambient vibration tests to evaluate the effectiveness of seismic retrofitting

NASA Astrophysics Data System (ADS)

Liang, Li; Takaaki, Ohkubo; Guang-hui, Li

2018-03-01

In recent years, earthquakes have occurred frequently, and the seismic performance of existing school buildings has become particularly important. The main method for improving the seismic resistance of existing buildings is reinforcement. However, there are few effective methods to evaluate the effect of reinforcement. Ambient vibration measurement experiments were conducted before and after seismic retrofitting using wireless measurement system and the changes of vibration characteristics were compared. The changes of acceleration response spectrum, natural periods and vibration modes indicate that the wireless vibration measurement system can be effectively applied to evaluate the effect of seismic retrofitting. The method can evaluate the effect of seismic retrofitting qualitatively, it is difficult to evaluate the effect of seismic retrofitting quantitatively at this stage.

The design and implementation of urban earthquake disaster loss evaluation and emergency response decision support systems based on GIS

NASA Astrophysics Data System (ADS)

Yang, Kun; Xu, Quan-li; Peng, Shuang-yun; Cao, Yan-bo

2008-10-01

Based on the necessity analysis of GIS applications in earthquake disaster prevention, this paper has deeply discussed the spatial integration scheme of urban earthquake disaster loss evaluation models and visualization technologies by using the network development methods such as COM/DCOM, ActiveX and ASP, as well as the spatial database development methods such as OO4O and ArcSDE based on ArcGIS software packages. Meanwhile, according to Software Engineering principles, a solution of Urban Earthquake Emergency Response Decision Support Systems based on GIS technologies have also been proposed, which include the systems logical structures, the technical routes,the system realization methods and function structures etc. Finally, the testing systems user interfaces have also been offered in the paper.

Evaluation of standardized sample collection, packaging, and decontamination procedures to assess cross-contamination potential during Bacillus anthracis incident response operations

PubMed Central

Calfee, M. Worth; Tufts, Jenia; Meyer, Kathryn; McConkey, Katrina; Mickelsen, Leroy; Rose, Laura; Dowell, Chad; Delaney, Lisa; Weber, Angela; Morse, Stephen; Chaitram, Jasmine; Gray, Marshall

2016-01-01

Sample collection procedures and primary receptacle (sample container and bag) decontamination methods should prevent contaminant transfer between contaminated and non-contaminated surfaces and areas during bio-incident operations. Cross-contamination of personnel, equipment, or sample containers may result in the exfiltration of biological agent from the exclusion (hot) zone and have unintended negative consequences on response resources, activities and outcomes. The current study was designed to: (1) evaluate currently recommended sample collection and packaging procedures to identify procedural steps that may increase the likelihood of spore exfiltration or contaminant transfer; (2) evaluate the efficacy of currently recommended primary receptacle decontamination procedures; and (3) evaluate the efficacy of outer packaging decontamination methods. Wet- and dry-deposited fluorescent tracer powder was used in contaminant transfer tests to qualitatively evaluate the currently-recommended sample collection procedures. Bacillus atrophaeus spores, a surrogate for Bacillus anthracis, were used to evaluate the efficacy of spray- and wipe-based decontamination procedures. Both decontamination procedures were quantitatively evaluated on three types of sample packaging materials (corrugated fiberboard, polystyrene foam, and polyethylene plastic), and two contamination mechanisms (wet or dry inoculums). Contaminant transfer results suggested that size-appropriate gloves should be worn by personnel, templates should not be taped to or removed from surfaces, and primary receptacles should be selected carefully. The decontamination tests indicated that wipe-based decontamination procedures may be more effective than spray-based procedures; efficacy was not influenced by material type but was affected by the inoculation method. Incomplete surface decontamination was observed in all tests with dry inoculums. This study provides a foundation for optimizing current B. anthracis response procedures to minimize contaminant exfiltration. PMID:27362274

Evaluation of standardized sample collection, packaging, and decontamination procedures to assess cross-contamination potential during Bacillus anthracis incident response operations.

PubMed

Calfee, M Worth; Tufts, Jenia; Meyer, Kathryn; McConkey, Katrina; Mickelsen, Leroy; Rose, Laura; Dowell, Chad; Delaney, Lisa; Weber, Angela; Morse, Stephen; Chaitram, Jasmine; Gray, Marshall

2016-12-01

Sample collection procedures and primary receptacle (sample container and bag) decontamination methods should prevent contaminant transfer between contaminated and non-contaminated surfaces and areas during bio-incident operations. Cross-contamination of personnel, equipment, or sample containers may result in the exfiltration of biological agent from the exclusion (hot) zone and have unintended negative consequences on response resources, activities and outcomes. The current study was designed to: (1) evaluate currently recommended sample collection and packaging procedures to identify procedural steps that may increase the likelihood of spore exfiltration or contaminant transfer; (2) evaluate the efficacy of currently recommended primary receptacle decontamination procedures; and (3) evaluate the efficacy of outer packaging decontamination methods. Wet- and dry-deposited fluorescent tracer powder was used in contaminant transfer tests to qualitatively evaluate the currently-recommended sample collection procedures. Bacillus atrophaeus spores, a surrogate for Bacillus anthracis, were used to evaluate the efficacy of spray- and wipe-based decontamination procedures. Both decontamination procedures were quantitatively evaluated on three types of sample packaging materials (corrugated fiberboard, polystyrene foam, and polyethylene plastic), and two contamination mechanisms (wet or dry inoculums). Contaminant transfer results suggested that size-appropriate gloves should be worn by personnel, templates should not be taped to or removed from surfaces, and primary receptacles should be selected carefully. The decontamination tests indicated that wipe-based decontamination procedures may be more effective than spray-based procedures; efficacy was not influenced by material type but was affected by the inoculation method. Incomplete surface decontamination was observed in all tests with dry inoculums. This study provides a foundation for optimizing current B. anthracis response procedures to minimize contaminant exfiltration.

Improved response functions for gamma-ray skyshine analyses

NASA Astrophysics Data System (ADS)

Shultis, J. K.; Faw, R. E.; Deng, X.

1992-09-01

A computationally simple method, based on line-beam response functions, is refined for estimating gamma skyshine dose rates. Critical to this method is the availability of an accurate approximation for the line-beam response function (LBRF). In this study, the LBRF is evaluated accurately with the point-kernel technique using recent photon interaction data. Various approximations to the LBRF are considered, and a three parameter formula is selected as the most practical approximation. By fitting the approximating formula to point-kernel results, a set of parameters is obtained that allows the LBRF to be quickly and accurately evaluated for energies between 0.01 and 15 MeV, for source-to-detector distances from 1 to 3000 m, and for beam angles from 0 to 180 degrees. This re-evaluation of the approximate LBRF gives better accuracy, especially at low energies, over a greater source-to-detector range than do previous LBRF approximations. A conical beam response function is also introduced for application to skyshine sources that are azimuthally symmetric about a vertical axis. The new response functions are then applied to three simple skyshine geometries (an open silo geometry, an infinite wall, and a rectangular four-wall building) and the results are compared to previous calculations and benchmark data.

An evaluation of three methods of saying "no" to avoid an escalating response class hierarchy.

PubMed

Mace, F Charles; Pratt, Jamie L; Prager, Kevin L; Pritchard, Duncan

2011-01-01

We evaluated the effects of three different methods of denying access to requested high-preference activities on escalating problem behavior. Functional analysis and response class hierarchy (RCH) assessment results indicated that 4 topographies of problem behaviors displayed by a 13-year-old boy with high-functioning autism constituted an RCH maintained by positive (tangible) reinforcement. Identification of the RCH comprised the baseline phase, during which computer access was denied by saying "no" and providing an explanation for the restriction. Two alternative methods of saying "no" were then evaluated. These methods included (a) denying computer access while providing an opportunity to engage in an alternative preferred activity and (b) denying immediate computer access by arranging a contingency between completion of a low-preference task and subsequent computer access. Results indicated that a hierarchy of problem behavior may be identified in the context of denying access to a preferred activity and that it may be possible to prevent occurrences of escalating problem behavior by either presenting alternative options or arranging contingencies when saying "no" to a child's requests.

Comparison of Kernel Equating and Item Response Theory Equating Methods

ERIC Educational Resources Information Center

Meng, Yu

2012-01-01

The kernel method of test equating is a unified approach to test equating with some advantages over traditional equating methods. Therefore, it is important to evaluate in a comprehensive way the usefulness and appropriateness of the Kernel equating (KE) method, as well as its advantages and disadvantages compared with several popular item…

Evaluation of different inertial control methods for variable-speed wind turbines simulated by fatigue, aerodynamic, structures and turbulence (FAST)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Xiao; Gao, Wenzhong; Scholbrock, Andrew

To mitigate the degraded power system inertia and undesirable primary frequency response caused by large-scale wind power integration, the frequency support capabilities of variable-speed wind turbines is studied in this work. This is made possible by controlled inertial response, which is demonstrated on a research turbine - controls advanced research turbine, 3-bladed (CART3). Two distinct inertial control (IC) methods are analysed in terms of their impacts on the grids and the response of the turbine itself. The released kinetic energy in the IC methods are determined by the frequency measurement or shaped active power reference in the turbine speed-power plane.more » The wind turbine model is based on the high-fidelity turbine simulator fatigue, aerodynamic, structures and turbulence, which constitutes the aggregated wind power plant model with the simplified power converter model. The IC methods are implemented over the baseline CART3 controller, evaluated in the modified 9-bus and 14-bus testing power grids considering different wind speeds and different wind power penetration levels. The simulation results provide various insights on designing such kinds of ICs. The authors calculate the short-term dynamic equivalent loads and give a discussion about the turbine structural loadings related to the inertial response.« less

A comparison of sediment toxicity test methods at three Great Lake Areas of Concern

USGS Publications Warehouse

Burton, G. Allen; Ingersoll, Christopher G.; Burnett, LouAnn C.; Henry, Mary; Hinman, Mark L.; Klaine, Stephen J.; Landrum, Peter F.; Ross, Phillipe; Tuchman, Marc

1996-01-01

The significance of sediment contamination is often evaluated using sediment toxicity (bioassay) testing. There are relatively few “standardized” test methods for evaluating sediments. Popular sediment toxicity methods examine the extractable water (elutriate), interstitial water, or whole (bulk) sediment phases using test species spanning the aquatic food chain from bacteria to fish. The current study was designed to evaluate which toxicity tests were most useful in evaluations of sediment contamination at three Great Lake Areas of Concern. Responses of 24 different organisms including fish, mayflies, amphipods, midges, cladocerans, rotifers, macrophytes, algae, and bacteria were compared using whole sediment or elutriate toxicity assays. Sediments from several sites in the Buffalo River, Calumet River (Indiana Harbor), and Saginaw River were tested, as part of the U.S. Environmental Protection Agency's (USEPA) Assessment and Remediation of Contaminated Sediments (ARCS) Project. Results indicated several assays to be sensitive to sediment toxicity and able to discriminate between differing levels of toxicity. Many of the assay responses were significantly correlated to other toxicity responses and were similar based on factor analysis. For most applications, a test design consisting of two to three assays should adequately detect sediment toxicity, consisting of various groupings of the following species: Hyalella azteca, Ceriodaphnia dubia, Chironomus riparius, Chironomus tentans, Daphnia magna, Pimephales promelas, Hexagenia bilineata, Diporeia sp., Hydrilla verticillata, or Lemna minor.

Evaluation of subcutaneous and alveolar implantation surgical sites in the study of the biological properties of root-end filling endodontic materials

PubMed Central

CINTRA, Luciano Tavares Angelo; BERNABÉ, Pedro Felício Estrada; de MORAES, Ivaldo Gomes; GOMES-FILHO, João Eduardo; OKAMOTO, Tetuo; CONSOLARO, Alberto; PINHEIRO, Tiago Novaes

2010-01-01

Objective The aim of this study was to compare two methodologies used in the evaluation of tissue response to root-end filling materials in rats. Material and Methods Forty rats were divided into 4 groups: in Groups I and II (control groups), empty polyethylene tubes were implanted in the extraction site and in the subcutaneous tissue, respectively; in Groups III and IV, polyethylene tubes filled with ProRoot MTA were implanted in the extraction site and in the subcutaneous tissue, respectively. The animals were killed 7 and 30 days after tube implantation, and the hemi-maxillas and the capsular subcutaneous tissue, both with the tubes, were removed. Specimens were processed and evaluated histomorphologicaly under light microscopy. The scores obtained were analyzed statistically by the Kruskal-Wallis test (p<0.05). Results There were no statistically significant differences between the implantation methods (p=0.78033, p=0.72039). It was observed that the 30-day groups presented a more mature healing process due to smaller number of inflammatory cells. Conclusion The present study showed no differences in tissue responses as far as the implantation site and the studied period were concerned. Alveolar socket implantation methodology represents an interesting method in the study of the biological properties of root-end filling endodontic materials due to the opportunity to evaluate bone tissue response. PMID:20379685

Tumor Response After Stereotactic Body Radiation Therapy to Nonspine Bone Metastases: An Evaluation of Response Criteria

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonald, Rachel; Probyn, Linda; Poon, Ian

Purpose: To evaluate the applicability of the Response Evaluation Criteria in Solid Tumors (RECIST 1.1) and University of Texas MD Anderson (MDA) Cancer Center criteria in the setting of stereotactic body radiation therapy (SBRT) to nonspine bone metastases. Methods: Patients who were treated with SBRT to nonspine bone metastases were identified by retrospective chart review. An independent musculoskeletal radiologist evaluated response to treatment using computed tomography (CT) scans. Results: Thirty-three patients were treated to 42 nonspine bone metastases. The most common primary cancer cites were renal cell carcinoma (RCC) (33.3%), lung (24.2%), and prostate (18.2%). Bone metastases were either mainlymore » lytic (57.1%), mainly sclerotic (28.6%), or mixed (14.3%). When lytic and sclerotic lesions were evaluated according to RECIST 1.1, local control (LC) was 83%, 85%, 88%, and 80% for those with CT imaging between months 1 to 3, 4 to 6, 7 to 9, and 10 to 12, respectively. When evaluated by the MDA criteria by density, LC within each time period was slightly greater. Overall LC decreased considerably when evaluated by MDA in terms of size. Conclusions: Consensus definitions of response are required as they have implications on clinical trials and disease management. Without consistent response criteria, outcomes from clinical trials cannot be compared and treatment efficacy remains undetermined.« less

The Effect of High Energy Ball Milling on the Dynamic Response of Aluminum Powders

NASA Astrophysics Data System (ADS)

Beason, Matthew T.; Justice, Andrew W.; Gunduz, Ibrahim E.; Son, Steven F.

2017-06-01

Ball milling is an effective method to enhance the reactivity of intermetallic reactives by reducing characteristic diffusions distances. During this process, ductile reactants are mixed into a lamellar material with nanoscale features, resulting in significant strain hardening. Plate impact experiments using a single stage light gas gun have been performed to evaluate the effect of high energy ball milling (HEBM) on the mechanical properties and dynamic response of cold pressed aluminum compacts. The average grain size of the milled material is evaluate and suggested as a method of correlating the measured response to the properties of milled composites. This material is based upon work supported by the Department of Energy, National Nuclear Security Administration, under Award Number(s) DE-NA0002377, as well as individual funding (Beason) by the Department of Defense through the NDSEG.

Thirty Years of Nonparametric Item Response Theory.

ERIC Educational Resources Information Center

Molenaar, Ivo W.

2001-01-01

Discusses relationships between a mathematical measurement model and its real-world applications. Makes a distinction between large-scale data matrices commonly found in educational measurement and smaller matrices found in attitude and personality measurement. Also evaluates nonparametric methods for estimating item response functions and…

Comprehensive evaluation of poly(I:C) induced inflammatory response in an airway epithelial model

PubMed Central

Lever, Amanda R; Park, Hyoungshin; Mulhern, Thomas J; Jackson, George R; Comolli, James C; Borenstein, Jeffrey T; Hayden, Patrick J; Prantil-Baun, Rachelle

2015-01-01

Respiratory viruses invade the upper airway of the lung, triggering a potent immune response that often exacerbates preexisting conditions such as asthma and COPD. Poly(I:C) is a synthetic analog of viral dsRNA that induces the characteristic inflammatory response associated with viral infection, such as loss of epithelial integrity, and increased production of mucus and inflammatory cytokines. Here, we explore the mechanistic responses to poly(I:C) in a well-defined primary normal human bronchial epithelial (NHBE) model that recapitulates in vivo functions and responses. We developed functional and quantifiable methods to evaluate the physiology of our model in both healthy and inflamed states. Through gene and protein expression, we validated the differentiation state and population of essential cell subtypes (i.e., ciliated, goblet, club, and basal cells) as compared to the human lung. Assays for total mucus production, cytokine secretion, and barrier function were used to evaluate in vitro physiology and response to viral insult. Cells were treated apically with poly(I:C) and evaluated 48 h after induction. Results revealed a dose-dependent increase in goblet cell differentiation, as well as, an increase in mucus production relative to controls. There was also a dose-dependent increase in secretion of IL-6, IL-8, TNF-α, and RANTES. Epithelial barrier function, as measured by TEER, was maintained at 1501 ± 355 Ω*cm² postdifferentiation, but dropped significantly when challenged with poly(I:C). This study provides first steps toward a well-characterized model with defined functional methods for understanding dsRNA stimulated inflammatory responses in a physiologically relevant manner. PMID:25847914

A Bifactor Multidimensional Item Response Theory Model for Differential Item Functioning Analysis on Testlet-Based Items

ERIC Educational Resources Information Center

Fukuhara, Hirotaka; Kamata, Akihito

2011-01-01

A differential item functioning (DIF) detection method for testlet-based data was proposed and evaluated in this study. The proposed DIF model is an extension of a bifactor multidimensional item response theory (MIRT) model for testlets. Unlike traditional item response theory (IRT) DIF models, the proposed model takes testlet effects into…

Using a fuzzy comprehensive evaluation method to determine product usability: A test case

PubMed Central

Zhou, Ronggang; Chan, Alan H. S.

2016-01-01

BACKGROUND: In order to take into account the inherent uncertainties during product usability evaluation, Zhou and Chan [1] proposed a comprehensive method of usability evaluation for products by combining the analytic hierarchy process (AHP) and fuzzy evaluation methods for synthesizing performance data and subjective response data. This method was designed to provide an integrated framework combining the inevitable vague judgments from the multiple stages of the product evaluation process. OBJECTIVE AND METHODS: In order to illustrate the effectiveness of the model, this study used a summative usability test case to assess the application and strength of the general fuzzy usability framework. To test the proposed fuzzy usability evaluation framework [1], a standard summative usability test was conducted to benchmark the overall usability of a specific network management software. Based on the test data, the fuzzy method was applied to incorporate both the usability scores and uncertainties involved in the multiple components of the evaluation. Then, with Monte Carlo simulation procedures, confidence intervals were used to compare the reliabilities among the fuzzy approach and two typical conventional methods combining metrics based on percentages. RESULTS AND CONCLUSIONS: This case study showed that the fuzzy evaluation technique can be applied successfully for combining summative usability testing data to achieve an overall usability quality for the network software evaluated. Greater differences of confidence interval widths between the method of averaging equally percentage and weighted evaluation method, including the method of weighted percentage averages, verified the strength of the fuzzy method. PMID:28035942

Accurate electronic and chemical properties of 3d transition metal oxides using a calculated linear response U and a DFT + U(V) method.

PubMed

Xu, Zhongnan; Joshi, Yogesh V; Raman, Sumathy; Kitchin, John R

2015-04-14

We validate the usage of the calculated, linear response Hubbard U for evaluating accurate electronic and chemical properties of bulk 3d transition metal oxides. We find calculated values of U lead to improved band gaps. For the evaluation of accurate reaction energies, we first identify and eliminate contributions to the reaction energies of bulk systems due only to changes in U and construct a thermodynamic cycle that references the total energies of unique U systems to a common point using a DFT + U(V) method, which we recast from a recently introduced DFT + U(R) method for molecular systems. We then introduce a semi-empirical method based on weighted DFT/DFT + U cohesive energies to calculate bulk oxidation energies of transition metal oxides using density functional theory and linear response calculated U values. We validate this method by calculating 14 reactions energies involving V, Cr, Mn, Fe, and Co oxides. We find up to an 85% reduction of the mean average error (MAE) compared to energies calculated with the Perdew-Burke-Ernzerhof functional. When our method is compared with DFT + U with empirically derived U values and the HSE06 hybrid functional, we find up to 65% and 39% reductions in the MAE, respectively.

Comparative evaluation of test methods to simulate acoustic response of shroud-enclosed spacecraft structures

NASA Technical Reports Server (NTRS)

On, F. J.

1975-01-01

Test methods were evaluated to ascertain whether a spacecraft, properly tested within its shroud, could be vibroacoustic tested without the shroud, with adjustments made in the acoustic input spectra to simulate the acoustic response of the missing shroud. The evaluation was based on vibroacoustic test results obtained from a baseline model composed (1) of a spacecraft with adapter, lower support structure, and shroud; (2) of the spacecraft, adapter, and lower structure, but without the shroud; and (3) of the spacecraft and adapter only. Emphasis was placed on the magnitude of the acoustic input changes required to substitute for the shroud and the difficulty of making such input changes, and the degree of missimulation which can result from the performance of a particular, less-than optimum test. Conclusions are drawn on the advantages and disadvantages derived from the use of input spectra adjustment methods and lower support structure simulations. Test guidelines were also developed for planning and performing a launch acoustic-environmental test.

Recommendations for imaging tumor response in neurofibromatosis clinical trials

PubMed Central

Ardern-Holmes, Simone L.; Babovic-Vuksanovic, Dusica; Barker, Fred G.; Connor, Steve; Evans, D. Gareth; Fisher, Michael J.; Goutagny, Stephane; Harris, Gordon J.; Jaramillo, Diego; Karajannis, Matthias A.; Korf, Bruce R.; Mautner, Victor; Plotkin, Scott R.; Poussaint, Tina Y.; Robertson, Kent; Shih, Chie-Schin; Widemann, Brigitte C.

2013-01-01

Objective: Neurofibromatosis (NF)-related benign tumors such as plexiform neurofibromas (PN) and vestibular schwannomas (VS) can cause substantial morbidity. Clinical trials directed at these tumors have become available. Due to differences in disease manifestations and the natural history of NF-related tumors, response criteria used for solid cancers (1-dimensional/RECIST [Response Evaluation Criteria in Solid Tumors] and bidimensional/World Health Organization) have limited applicability. No standardized response criteria for benign NF tumors exist. The goal of the Tumor Measurement Working Group of the REiNS (Response Evaluation in Neurofibromatosis and Schwannomatosis) committee is to propose consensus guidelines for the evaluation of imaging response in clinical trials for NF tumors. Methods: Currently used imaging endpoints, designs of NF clinical trials, and knowledge of the natural history of NF-related tumors, in particular PN and VS, were reviewed. Consensus recommendations for response evaluation for future studies were developed based on this review and the expertise of group members. Results: MRI with volumetric analysis is recommended to sensitively and reproducibly evaluate changes in tumor size in clinical trials. Volumetric analysis requires adherence to specific imaging recommendations. A 20% volume change was chosen to indicate a decrease or increase in tumor size. Use of these criteria in future trials will enable meaningful comparison of results across studies. Conclusions: The proposed imaging response evaluation guidelines, along with validated clinical outcome measures, will maximize the ability to identify potentially active agents for patients with NF and benign tumors. PMID:24249804

A Method for Evaluating Insecticide Efficacy against Bed Bug, Cimex lectularius, Eggs and First Instars.

PubMed

Campbell, Brittany E; Miller, Dini M

2017-03-15

Standard toxicity evaluations of insecticides against insect pests are primarily conducted on adult insects. Evaluations are based on a dose-response or concentration-response curve, where mortality increases as the dose or concentration of an insecticide is increased. Standard lethal concentration (LC50) and lethal dose (LD50) tests that result in 50% mortality of a test population can be challenging for evaluating toxicity of insecticides against non-adult insect life stages, such as eggs and early instar or nymphal stages. However, this information is essential for understanding insecticide efficacy in all bed bug life stages, which affects control and treatment efforts. This protocol uses a standard dipping bioassay modified for bed bug eggs and a contact insecticidal assay for treating nymphal first instars. These assays produce a concentration-response curve to further quantify LC50 values for insecticide evaluations.

Development, Evaluation, and Validation of Environmental Assessment Tools to Evaluate the College Nutrition Environment

ERIC Educational Resources Information Center

Freedman, Marjorie R.

2010-01-01

Objective: To develop, evaluate, and validate 2 nutrition environment assessment tools (surveys), for specific use in combating overweight on college/university campuses. Participants and Methods: Invitations to complete surveys were e-mailed to food service and health center directors at 47 universities, Winter 2008. Overall response rate was…

Improvement of the quality of BRAF testing in melanomas with nationwide external quality assessment, for the BRAF EQA group

PubMed Central

2013-01-01

Background Knowledge about tumour gene mutation status is essential for the treatment of increasing numbers of cancer patients, and testing quality has a major impact on treatment response and cost. In 2012, 4,629 tests for BRAF p.V600 were performed in France, in patients with melanomas. Methods Two batches of unstained melanoma sections were sent, in May and November 2012, to the 46 laboratories supported by the French National Institute of Cancer (INCa). An external quality assessment (EQA) evaluated mutation status, response times and compliance with INCa recommendations. Results All the French laboratories involved in testing participated in the EQA. Fourteen different methods were used to detect BRAF mutations, most consisting of combinations of in-house techniques. False responses were noted in 25/520 cases (4.8%), 11 of which concerned confusion between p.V600E and p.V600K. Thus, 2.7% of responses would have led to inappropriate treatment. Within six months, mean response times decreased from 22 to 12 days (P<0.001), and the percentage of samples evaluated by a pathologist for tumour cell content increased, from 75.2% to 96.9% (P<0.001). Conclusion Despite the use of non-certified methods, the false response rate was low. Nationwide EQA can improve the quality of molecular pathology tests on tumours. PMID:24119386

The influence of an audience response system on knowledge retention: an application to resident education.

PubMed

Pradhan, Archana; Sparano, Dina; Ananth, Cande V

2005-11-01

The purpose of the study was to compare delivery methods of lecture material regarding contraceptive options by either traditional or interactive lecture style with the use of an audience response system with obstetrics and gynecology residents. A prospective, randomized controlled trial that included 17 obstetrics and gynecology residents was conducted. Group differences and comparison of pre/posttest scores to evaluate efficacy of lecture styles were performed with the Student t test. Each participant completed an evaluation to assess usefulness of the audience response system. Residents who received audience response system interactive lectures showed a 21% improvement between pretest and posttest scores; residents who received the standard lecture demonstrated a 2% improvement (P = .018). The evaluation survey showed that 82% of residents thought that the audience response system was a helpful learning aid. The results of this randomized controlled trial demonstrate the effectiveness of audience response system for knowledge retention, which suggests that it may be an efficient teaching tool for residency education.

SCREENING PROCESSED MILK FOR VOLATILE ORGANIC COMPOUNDS USING VACUUM DISTILLATION/GAS CHROMATOGRAPHY/MASS SPECTROMETRY

EPA Science Inventory

An adaptation of Office of Solid Waste and Emergency Response' Test Methods for Evaluating Solid Waste Physical/Chemical Methods (SW-846) method 8261 to analyze milk for an expanded list of volatile organic compounds is presented. The milk matriz exhibits a strong affinity for o...

A comparison of HAS & NICE guidelines for the economic evaluation of health technologies in the context of their respective national health care systems and cultural environments

PubMed Central

Massetti, Marc; Aballéa, Samuel; Videau, Yann; Rémuzat, Cécile; Roïz, Julie; Toumi, Mondher

2015-01-01

Background Health technology assessment (HTA) has been reinforced in France, notably with the introduction of economic evaluation in the pricing process for the most innovative and expensive treatments. Similarly to the National Institute for Clinical Excellence (NICE) in England, the National Authority for Health (HAS), which is responsible for economic evaluation of new health technologies in France, has published recommendations on the methods of economic evaluation. Since economic assessment represents a major element of HTA in England, exploring the differences between these methodological guidelines might help to comprehend both the shape and the role economic assessment is intended to have in the French health care system. Methods Methodological guidelines for economic evaluation in France and England have been compared topic-by-topic in order to bring out key differences in the recommended methods for economic evaluation. Results The analysis of both guidelines has revealed multiple similarities between France and England, although a number of differences were also noted regarding the elected methodology of analysis, the comparison of studies’ outcomes with cost-effectiveness thresholds, the study population to consider, the quality of life valuation methods, the perspective on costs, the types of resources considered and their valuation, the discount rates to apply in order to reflect the present value of interventions, etc. To account for these differences, modifications will be required in order to adapt economic models from one country to the other. Conclusions Changes in HTA assessment methods occur in response to different challenges determined by the different philosophical and cultural considerations surrounding health and welfare as well as the political considerations regarding the role of public policies and the importance of their evaluation. PMID:27123190

Using a fuzzy comprehensive evaluation method to determine product usability: A test case.

PubMed

Zhou, Ronggang; Chan, Alan H S

2017-01-01

In order to take into account the inherent uncertainties during product usability evaluation, Zhou and Chan [1] proposed a comprehensive method of usability evaluation for products by combining the analytic hierarchy process (AHP) and fuzzy evaluation methods for synthesizing performance data and subjective response data. This method was designed to provide an integrated framework combining the inevitable vague judgments from the multiple stages of the product evaluation process. In order to illustrate the effectiveness of the model, this study used a summative usability test case to assess the application and strength of the general fuzzy usability framework. To test the proposed fuzzy usability evaluation framework [1], a standard summative usability test was conducted to benchmark the overall usability of a specific network management software. Based on the test data, the fuzzy method was applied to incorporate both the usability scores and uncertainties involved in the multiple components of the evaluation. Then, with Monte Carlo simulation procedures, confidence intervals were used to compare the reliabilities among the fuzzy approach and two typical conventional methods combining metrics based on percentages. This case study showed that the fuzzy evaluation technique can be applied successfully for combining summative usability testing data to achieve an overall usability quality for the network software evaluated. Greater differences of confidence interval widths between the method of averaging equally percentage and weighted evaluation method, including the method of weighted percentage averages, verified the strength of the fuzzy method.

Quantum mechanical/molecular mechanical/continuum style solvation model: linear response theory, variational treatment, and nuclear gradients.

PubMed

Li, Hui

2009-11-14

Linear response and variational treatment are formulated for Hartree-Fock (HF) and Kohn-Sham density functional theory (DFT) methods and combined discrete-continuum solvation models that incorporate self-consistently induced dipoles and charges. Due to the variational treatment, analytic nuclear gradients can be evaluated efficiently for these discrete and continuum solvation models. The forces and torques on the induced point dipoles and point charges can be evaluated using simple electrostatic formulas as for permanent point dipoles and point charges, in accordance with the electrostatic nature of these methods. Implementation and tests using the effective fragment potential (EFP, a polarizable force field) method and the conductorlike polarizable continuum model (CPCM) show that the nuclear gradients are as accurate as those in the gas phase HF and DFT methods. Using B3LYP/EFP/CPCM and time-dependent-B3LYP/EFP/CPCM methods, acetone S(0)-->S(1) excitation in aqueous solution is studied. The results are close to those from full B3LYP/CPCM calculations.

Responsive systems - The challenge for the nineties

NASA Technical Reports Server (NTRS)

Malek, Miroslaw

1990-01-01

A concept of responsive computer systems will be introduced. The emerging responsive systems demand fault-tolerant and real-time performance in parallel and distributed computing environments. The design methodologies for fault-tolerant, real time and responsive systems will be presented. Novel techniques of introducing redundancy for improved performance and dependability will be illustrated. The methods of system responsiveness evaluation will be proposed. The issues of determinism, closed and open systems will also be discussed from the perspective of responsive systems design.

Selection of response criteria for clinical trials of sarcoma treatment.

PubMed

Schuetze, Scott M; Baker, Laurence H; Benjamin, Robert S; Canetta, Renzo

2008-01-01

Soft tissue sarcomas are a heterogeneous group of malignancies arising from mesenchymal tissues. A large number of new therapies are being evaluated in patients with sarcomas, and consensus criteria defining treatment responses are essential for comparison of results from studies completed by different research groups. The 1979 World Health Organization (WHO) handbook set forth operationally defined criteria for response evaluation in solid tumors that were updated in 2000 with the publication of the Response Evaluation Criteria in Solid Tumors (RECIST). There have been significant advances in tumor imaging, however, that are not reflected in the RECIST. For example, computed tomography (CT) slice thickness has been reduced from 10 mm to < or =2.5 mm, allowing for more reproducible and accurate measurement of smaller lesions. Combination of imaging techniques, such as positron emission tomography with fluorine-18-fluorodeoxyglucose (18FDG-PET) and CT can provide investigators and clinicians with both anatomical and functional information regarding tumors, and there is now a large body of evidence demonstrating the effectiveness of PET/CT and other newer imaging methods for the detection and staging of tumors as well as early determination of responses to therapy. The application of newer imaging methods has the potential to decrease both the sample sizes required for, and duration of, clinical trials by providing an early indication of therapeutic response that is well correlated with clinical outcomes, such as time to tumor progression or overall survival. The results summarized in this review support the conclusion that the RECIST and the WHO criteria for evaluation of response in solid tumors need to be modernized. In addition, there is a current need for prospective trials to compare new response criteria with established endpoints and to validate imaging-based response rates as surrogate endpoints for clinical trials of new agents for sarcoma and other solid tumors.

Degradation of ticarcillin by subcritial water oxidation method: Application of response surface methodology and artificial neural network modeling.

PubMed

Yabalak, Erdal

2018-05-18

This study was performed to investigate the mineralization of ticarcillin in the artificially prepared aqueous solution presenting ticarcillin contaminated waters, which constitute a serious problem for human health. 81.99% of total organic carbon removal, 79.65% of chemical oxygen demand removal, and 94.35% of ticarcillin removal were achieved by using eco-friendly, time-saving, powerful and easy-applying, subcritical water oxidation method in the presence of a safe-to-use oxidizing agent, hydrogen peroxide. Central composite design, which belongs to the response surface methodology, was applied to design the degradation experiments, to optimize the methods, to evaluate the effects of the system variables, namely, temperature, hydrogen peroxide concentration, and treatment time, on the responses. In addition, theoretical equations were proposed in each removal processes. ANOVA tests were utilized to evaluate the reliability of the performed models. F values of 245.79, 88.74, and 48.22 were found for total organic carbon removal, chemical oxygen demand removal, and ticarcillin removal, respectively. Moreover, artificial neural network modeling was applied to estimate the response in each case and its prediction and optimizing performance was statistically examined and compared to the performance of central composite design.

An improved design method based on polyphase components for digital FIR filters

NASA Astrophysics Data System (ADS)

Kumar, A.; Kuldeep, B.; Singh, G. K.; Lee, Heung No

2017-11-01

This paper presents an efficient design of digital finite impulse response (FIR) filter, based on polyphase components and swarm optimisation techniques (SOTs). For this purpose, the design problem is formulated as mean square error between the actual response and ideal response in frequency domain using polyphase components of a prototype filter. To achieve more precise frequency response at some specified frequency, fractional derivative constraints (FDCs) have been applied, and optimal FDCs are computed using SOTs such as cuckoo search and modified cuckoo search algorithms. A comparative study of well-proved swarm optimisation, called particle swarm optimisation and artificial bee colony algorithm is made. The excellence of proposed method is evaluated using several important attributes of a filter. Comparative study evidences the excellence of proposed method for effective design of FIR filter.

A time-frequency analysis method to obtain stable estimates of magnetotelluric response function based on Hilbert-Huang transform

NASA Astrophysics Data System (ADS)

Cai, Jianhua

2017-05-01

The time-frequency analysis method represents signal as a function of time and frequency, and it is considered a powerful tool for handling arbitrary non-stationary time series by using instantaneous frequency and instantaneous amplitude. It also provides a possible alternative to the analysis of the non-stationary magnetotelluric (MT) signal. Based on the Hilbert-Huang transform (HHT), a time-frequency analysis method is proposed to obtain stable estimates of the magnetotelluric response function. In contrast to conventional methods, the response function estimation is performed in the time-frequency domain using instantaneous spectra rather than in the frequency domain, which allows for imaging the response parameter content as a function of time and frequency. The theory of the method is presented and the mathematical model and calculation procedure, which are used to estimate response function based on HHT time-frequency spectrum, are discussed. To evaluate the results, response function estimates are compared with estimates from a standard MT data processing method based on the Fourier transform. All results show that apparent resistivities and phases, which are calculated from the HHT time-frequency method, are generally more stable and reliable than those determined from the simple Fourier analysis. The proposed method overcomes the drawbacks of the traditional Fourier methods, and the resulting parameter minimises the estimation bias caused by the non-stationary characteristics of the MT data.

Unified Least Squares Methods for the Evaluation of Diagnostic Tests With the Gold Standard

PubMed Central

Tang, Liansheng Larry; Yuan, Ao; Collins, John; Che, Xuan; Chan, Leighton

2017-01-01

The article proposes a unified least squares method to estimate the receiver operating characteristic (ROC) parameters for continuous and ordinal diagnostic tests, such as cancer biomarkers. The method is based on a linear model framework using the empirically estimated sensitivities and specificities as input “data.” It gives consistent estimates for regression and accuracy parameters when the underlying continuous test results are normally distributed after some monotonic transformation. The key difference between the proposed method and the method of Tang and Zhou lies in the response variable. The response variable in the latter is transformed empirical ROC curves at different thresholds. It takes on many values for continuous test results, but few values for ordinal test results. The limited number of values for the response variable makes it impractical for ordinal data. However, the response variable in the proposed method takes on many more distinct values so that the method yields valid estimates for ordinal data. Extensive simulation studies are conducted to investigate and compare the finite sample performance of the proposed method with an existing method, and the method is then used to analyze 2 real cancer diagnostic example as an illustration. PMID:28469385

Human response to aviation noise : development of dose-response relationships for backcountry visitors - volume I: study methods

DOT National Transportation Integrated Search

2014-03-01

The Federal Aviation Administration and National Park Service conducted joint research to better understand the effects of noise due to commercial air tour operations over units of the National Park System. To evaluate the relationship between aircra...

Assessing Dimensionality of Noncompensatory Multidimensional Item Response Theory with Complex Structures

ERIC Educational Resources Information Center

Svetina, Dubravka

2013-01-01

The purpose of this study was to investigate the effect of complex structure on dimensionality assessment in noncompensatory multidimensional item response models using dimensionality assessment procedures based on DETECT (dimensionality evaluation to enumerate contributing traits) and NOHARM (normal ogive harmonic analysis robust method). Five…

75 FR 20901 - Standards for Business Practices and Communication Protocols for Public Utilities

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-22

... markets. This rule ensures that participants in wholesale energy markets where demand response products... those markets and addresses performance evaluation methods appropriate to use for demand response... markets, reducing transaction costs and providing an opportunity for more customers to participate in...

Methods and Purposes for Conducting Students' Course Evaluations Reported by North American Dental School and Dental Hygiene Program Leaders: A Preliminary Survey Study.

PubMed

Reinke, Robin E; Enright, Tonya; Love, Rebecca; Patel, Shalizeh A; Ali, Ala Omar; Horvath, Zsuzsa

2018-03-01

The aim of this preliminary survey study was to determine the perceptions of leaders of dental schools and dental hygiene programs regarding methods of and purposes for conducting students' course evaluations and their role in course improvement, curriculum design, and faculty assessment. A short electronic survey was distributed in 2016 to the academic deans of all 76 dental schools in the U.S. and Canada and a convenience sample of program directors of 232 of the total 332 accredited dental hygiene programs. Individuals from 93 institutions responded for an overall response rate of 30%: 30 of 76 dental schools (39.5% response rate) and 63 of the 232 dental hygiene programs (27% response rate). All of the respondents (100%) reported that their institutions' full-time faculty members were assessed by students in course evaluations for each course and semester they taught. However, only 78% reported that their part-time faculty members were evaluated by students. Course evaluations were mandatory in 62% (n=58) of the responding institutions, with the remaining 38% (n=35) optional. Respondents indicated course directors received the evaluation results for purposes of annual review (n=73, 78%) and instructional review (n=70, 75%). Further investigation of the use and effects of student evaluations is needed to better understand their role in faculty assessment and other aspects of the administration of dental schools and dental hygiene programs.

Evaluation of the annual Canadian biodosimetry network intercomparisons

PubMed Central

Wilkins, Ruth C.; Beaton-Green, Lindsay A.; Lachapelle, Sylvie; Kutzner, Barbara C.; Ferrarotto, Catherine; Chauhan, Vinita; Marro, Leonora; Livingston, Gordon K.; Boulay Greene, Hillary; Flegal, Farrah N.

2015-01-01

Abstract Purpose: To evaluate the importance of annual intercomparisons for maintaining the capacity and capabilities of a well-established biodosimetry network in conjunction with assessing efficient and effective analysis methods for emergency response. Materials and methods: Annual intercomparisons were conducted between laboratories in the Canadian National Biological Dosimetry Response Plan. Intercomparisons were performed over a six-year period and comprised of the shipment of 10–12 irradiated, blinded blood samples for analysis by each of the participating laboratories. Dose estimates were determined by each laboratory using the dicentric chromosome assay (conventional and QuickScan scoring) and where possible the cytokinesis block micronucleus (CBMN) assay. Dose estimates were returned to the lead laboratory for evaluation and comparison. Results: Individual laboratories performed comparably from year to year with only slight fluctuations in performance. Dose estimates using the dicentric chromosome assay were accurate about 80% of the time and the QuickScan method for scoring the dicentric chromosome assay was proven to reduce the time of analysis without having a significant effect on the dose estimates. Although analysis with the CBMN assay was comparable to QuickScan scoring with respect to speed, the accuracy of the dose estimates was greatly reduced. Conclusions: Annual intercomparisons are necessary to maintain a network of laboratories for emergency response biodosimetry as they evoke confidence in their capabilities. PMID:25670072

Evaluation of the response to xenon-133 radiations by thermoluminescent dosimeters used during the accident at Three Mile Island.

PubMed

Riley, R J; Zanzonico, P B; Masterson, M E; St Germain, J M; Laughlin, J S

1982-03-01

An evaluation is presented of the accuracy and sensitivity of three types of TLD's used during the accident at the Three Mile Island Nuclear Station. This evaluation indicated that, due to the method of calibration, all the dosimeters over-responded to 133Xe radiations. The response ranged from slightly above unity to almost two. Exposures of the TLD's were of two types, namely, the characteristic X-rays either were or were not filtered from the beam. The angular sensitivity of the dosimeters is also reported.

Measuring the electrical properties of soil using a calibrated ground-coupled GPR system

USGS Publications Warehouse

Oden, C.P.; Olhoeft, G.R.; Wright, D.L.; Powers, M.H.

2008-01-01

Traditional methods for estimating vadose zone soil properties using ground penetrating radar (GPR) include measuring travel time, fitting diffraction hyperbolae, and other methods exploiting geometry. Additional processing techniques for estimating soil properties are possible with properly calibrated GPR systems. Such calibration using ground-coupled antennas must account for the effects of the shallow soil on the antenna's response, because changing soil properties result in a changing antenna response. A prototype GPR system using ground-coupled antennas was calibrated using laboratory measurements and numerical simulations of the GPR components. Two methods for estimating subsurface properties that utilize the calibrated response were developed. First, a new nonlinear inversion algorithm to estimate shallow soil properties under ground-coupled antennas was evaluated. Tests with synthetic data showed that the inversion algorithm is well behaved across the allowed range of soil properties. A preliminary field test gave encouraging results, with estimated soil property uncertainties (????) of ??1.9 and ??4.4 mS/m for the relative dielectric permittivity and the electrical conductivity, respectively. Next, a deconvolution method for estimating the properties of subsurface reflectors with known shapes (e.g., pipes or planar interfaces) was developed. This method uses scattering matrices to account for the response of subsurface reflectors. The deconvolution method was evaluated for use with noisy data using synthetic data. Results indicate that the deconvolution method requires reflected waves with a signal/noise ratio of about 10:1 or greater. When applied to field data with a signal/noise ratio of 2:1, the method was able to estimate the reflection coefficient and relative permittivity, but the large uncertainty in this estimate precluded inversion for conductivity. ?? Soil Science Society of America.

Thermal effect on the dynamic response of axially functionally graded beam subjected to a moving harmonic load

NASA Astrophysics Data System (ADS)

Wang, Yuewu; Wu, Dafang

2016-10-01

Dynamic response of an axially functionally graded (AFG) beam under thermal environment subjected to a moving harmonic load is investigated within the frameworks of classical beam theory (CBT) and Timoshenko beam theory (TBT). The Lagrange method is employed to derive the equations of thermal buckling for AFG beam, and then with the critical buckling temperature as a parameter the Newmark-β method is adopted to evaluate the dynamic response of AFG beam under thermal environments. Admissible functions denoting transverse displacement are expressed in simple algebraic polynomial forms. Temperature-dependency of material constituent is considered. The rule of mixture (Voigt model) and Mori-Tanaka (MT) scheme are used to evaluate the beam's effective material properties. A ceramic-metal AFG beam with immovable boundary condition is considered as numerical illustration to show the thermal effects on the dynamic behaviors of the beam subjected to a moving harmonic load.

Applications of matched field processing to damage detection in composite wind turbine blades

NASA Astrophysics Data System (ADS)

Tippmann, Jeffery D.; Lanza di Scalea, Francesco

2015-03-01

There are many structures serving vital infrastructure, energy, and national security purposes. Inspecting the components and areas of the structure most prone to failure during maintenance operations by using non- destructive evaluation methods has been essential in avoiding costly, but preventable, catastrophic failures. In many cases, the inspections are performed by introducing acoustic, ultrasonic, or even thermographic waves into the structure and then evaluating the response. Sometimes the structure, or a component, is not accessible for active inspection methods. Because of this, there is a growing interest to use passive methods, such as using ambient noise, or sources of opportunity, to produce a passive impulse response function similar to the active approach. Several matched field processing techniques most notably used in oceanography and seismology applications are examined in more detail. While sparse array imaging in structures has been studied for years, all methods studied previously have used an active interrogation approach. Here, structural damage detection is studied by use of the reconstructed impulse response functions in ambient noise within sparse array imaging techniques, such as matched-field processing. This has been studied in experiments on a 9-m wind turbine blade.

Evaluating a Research Training Programme for People with Intellectual Disabilities Participating in Inclusive Research: The Views of Participants

ERIC Educational Resources Information Center

Fullana, Judit; Pallisera, Maria; Català, Elena; Puyalto, Carolina

2017-01-01

Background: This article presents the results of evaluating a research training programme aimed at developing the skills of people with intellectual disabilities to actively participate in inclusive research. Methods: The present authors opted for a responsive approach to evaluation, using a combination of interviews, questionnaires and focus…

MULTI-SITE FIELD EVALUATION OF CANDIDATE SAMPLERS FOR MEASURING COARSE-MODE PM

EPA Science Inventory

In response to expected changes to the National Ambient Air Quality Standards for particulate matter, comprehensive field studies were conducted to evaluate the performance of sampling methods for measuring coarse mode aerosols (i.e. PMc). Five separate PMc sampling approaches w...

Using multiple methods to assess learning and outcomes in an online degree-granting dental hygiene program.

PubMed

Springfield, Emily; Gwozdek, Anne E; Peet, Melissa; Kerschbaum, Wendy E

2012-04-01

Program evaluation is a necessary component of curricular change and innovation. It ascertains whether an innovation has met benchmarks and contributes to the body of knowledge about educational methodologies and supports the use of evidence-based practice in teaching. Education researchers argue that rigorous program evaluation should utilize a mixed-method approach, triangulating both qualitative and quantitative methods to understand program effectiveness. This approach was used to evaluate the University of Michigan Dental Hygiene Degree Completion E-Learning (online) Program. Quantitative data included time spent on coursework, grades, publications, course evaluation results, and survey responses. Qualitative data included student and faculty responses in focus groups and on surveys as well as students' portfolio reflections. The results showed the program was academically rigorous, fostering students' ability to connect theory with practice and apply evidence-based practice principles. These results also demonstrated that the students had learned to critically reflect on their practice and develop expanded professional identities; going beyond the role of clinician, they began to see themselves as educators, advocates, and researchers. This evaluation model is easily adaptable and is applicable to any health science or other professional degree program. This study also raised important questions regarding the effect of meta-reflection on student confidence and professional behavior.

Preequating with Empirical Item Characteristic Curves: An Observed-Score Preequating Method

ERIC Educational Resources Information Center

Zu, Jiyun; Puhan, Gautam

2014-01-01

Preequating is in demand because it reduces score reporting time. In this article, we evaluated an observed-score preequating method: the empirical item characteristic curve (EICC) method, which makes preequating without item response theory (IRT) possible. EICC preequating results were compared with a criterion equating and with IRT true-score…

Evaluation of the community response to HIV and AIDS: learning from a portfolio approach.

PubMed

Rodriguez-García, Rosalía; Wilson, David; York, Nick; Low, Corinne; N'Jie, N'Della; Bonnel, Rene

2013-01-01

While communities have played a large role in the HIV/AIDS response, their contributions and innovative approaches to HIV prevention, treatment, care and support have not always been the focus of systematic and rigorous evaluations. To address this gap, the World Bank led an evaluation of the impact of the community response to HIV, including country studies in Burkina Faso, India, Kenya, Lesotho, Nigeria, Senegal, South Africa and Zimbabwe over a three-year period. Due to the complexity and varied nature of community responses, the evaluation attempted to determine the results that investments have produced at the community level by applying a mixed method approach: Randomized Controlled Trials, quasi-experimental studies, qualitative studies and analytical studies including financial data. Specifically, the studies examined a typology of community response and the flow of funds to community-based organizations, while investigating the impact of the community responses on (1) knowledge and behavior, (2) use of services, (3) social transformation, and (4) HIV incidence. This editorial summarizes the results of this evaluation portfolio, finding that investments in communities have produced significant results, including, improved knowledge and behavior, and increased use of health services, and even decreased HIV incidence. Evidence on social transformation was more mixed, with community groups found to be effective only in some settings. Each study in the evaluation provides a partial view of how communities shape the local response; however, taken together they corroborate the common wisdom that communities can be a vital part of the global HIV/AIDS response.

A robust direct-integration method for rotorcraft maneuver and periodic response

NASA Technical Reports Server (NTRS)

Panda, Brahmananda

1992-01-01

The Newmark-Beta method and the Newton-Raphson iteration scheme are combined to develop a direct-integration method for evaluating the maneuver and periodic-response expressions for rotorcraft. The method requires the generation of Jacobians and includes higher derivatives in the formulation of the geometric stiffness matrix to enhance the convergence of the system. The method leads to effective convergence with nonlinear structural dynamics and aerodynamic terms. Singularities in the matrices can be addressed with the method as they arise from a Lagrange multiplier approach for coupling equations with nonlinear constraints. The method is also shown to be general enough to handle singularities from quasisteady control-system models. The method is shown to be more general and robust than the similar 2GCHAS method for analyzing rotorcraft dynamics.

Physiological Imaging-Defined, Response-Driven Subvolumes of a Tumor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farjam, Reza; Department of Radiation Oncology, University of Michigan, Ann Arbor, Michigan; Tsien, Christina I.

2013-04-01

Purpose: To develop an image analysis framework to delineate the physiological imaging-defined subvolumes of a tumor in relating to treatment response and outcome. Methods and Materials: Our proposed approach delineates the subvolumes of a tumor based on its heterogeneous distributions of physiological imaging parameters. The method assigns each voxel a probabilistic membership function belonging to the physiological parameter classes defined in a sample of tumors, and then calculates the related subvolumes in each tumor. We applied our approach to regional cerebral blood volume (rCBV) and Gd-DTPA transfer constant (K{sup trans}) images of patients who had brain metastases and were treatedmore » by whole-brain radiation therapy (WBRT). A total of 45 lesions were included in the analysis. Changes in the rCBV (or K{sup trans})–defined subvolumes of the tumors from pre-RT to 2 weeks after the start of WBRT (2W) were evaluated for differentiation of responsive, stable, and progressive tumors using the Mann-Whitney U test. Performance of the newly developed metrics for predicting tumor response to WBRT was evaluated by receiver operating characteristic (ROC) curve analysis. Results: The percentage decrease in the high-CBV-defined subvolumes of the tumors from pre-RT to 2W was significantly greater in the group of responsive tumors than in the group of stable and progressive tumors (P<.007). The change in the high-CBV-defined subvolumes of the tumors from pre-RT to 2W was a predictor for post-RT response significantly better than change in the gross tumor volume observed during the same time interval (P=.012), suggesting that the physiological change occurs before the volumetric change. Also, K{sup trans} did not add significant discriminatory information for assessing response with respect to rCBV. Conclusion: The physiological imaging-defined subvolumes of the tumors delineated by our method could be candidates for boost target, for which further development and evaluation is warranted.« less

Multiwalled Carbon Nanotube Dispersion Methods Affect Their Aggregation, Deposition, and Biomarker Response

EPA Science Inventory

To systematically evaluate how dispersion methods affect the environmental behaviors of multiwalled carbon nanotubes (MWNTs), MWNTs were dispersed in various solutions (e.g., surfactants, natural organic matter (NOM), and etc.) via ultrasonication (SON) and long-term stirring (LT...

Empirical evaluation of meta-analytic approaches for nutrient and health outcome dose-response data

USDA-ARS?s Scientific Manuscript database

The objective of this study is to empirically compare alternative meta-analytic methods for combining dose-response data from epidemiological studies. We identified meta-analyses of epidemiological studies that analyzed the association between a single nutrient and a dichotomous outcome. For each to...

Dose-Response Analysis of RNA-Seq Profiles in Archival Formalin-Fixed Paraffin-Embedded (FFPE) Samples.

EPA Science Inventory

Use of archival resources has been limited to date by inconsistent methods for genomic profiling of degraded RNA from formalin-fixed paraffin-embedded (FFPE) samples. RNA-sequencing offers a promising way to address this problem. Here we evaluated transcriptomic dose responses us...

DEVELOPMENT AND EVALUATION OF NOVEL DOSE-RESPONSE MODELS FOR USE IN MICROBIAL RISK ASSESSMENT

EPA Science Inventory

This document contains a description of dose-response modeling methods designed to provide a robust approach under uncertainty for predicting human population risk from exposure to pathogens in drinking water.

The purpose of this document is to describe a body of literatu...

Allegheny hardwood regeneration response to even-age harvesting methods

Treesearch

John C. Bjorkbom; Russell S. Walters; Russell S. Walters

1986-01-01

Allegheny hardwood regeneration response to block clearcutting, alternate strip clearcutting, and two-cut shelterwood, and in an uncut control was compared. Stand regeneration success was evaluated 5 years after harvest. Clearcutting resulted in high mortality of advance regeneration. Thus, regeneration by block clearcutting was not successful, though both alternate...

Techniques for obtaining subjective response to vertical vibration

NASA Technical Reports Server (NTRS)

Clarke, M. J.; Oborne, D. J.

1975-01-01

Laboratory experiments were performed to validate the techniques used for obtaining ratings in the field surveys carried out by the University College of Swansea. In addition, attempts were made to evaluate the basic form of the human response to vibration. Some of the results obtained by different methods are described.

An Impulse Based Substructuring approach for impact analysis and load case simulations

NASA Astrophysics Data System (ADS)

Rixen, Daniel J.; van der Valk, Paul L. C.

2013-12-01

In the present paper we outline the basic theory of assembling substructures for which the dynamics are described as Impulse Response Functions. The assembly procedure computes the time response of a system by evaluating per substructure the convolution product between the Impulse Response Functions and the applied forces, including the interface forces that are computed to satisfy the interface compatibility. We call this approach the Impulse Based Substructuring method since it transposes to the time domain the Frequency Based Substructuring approach. In the Impulse Based Substructuring technique the Impulse Response Functions of the substructures can be gathered either from experimental tests using a hammer impact or from time-integration of numerical submodels. In this paper the implementation of the method is outlined for the case when the impulse responses of the substructures are computed numerically. A simple bar example is shown in order to illustrate the concept. The Impulse Based Substructuring allows fast evaluation of impact response of a structure when the impulse response of its components is known. It can thus be used to efficiently optimize designs of consumer products by including impact behavior at the early stage of the design, but also for performing substructured simulations of complex structures such as offshore wind turbines.

Investigating Robustness of Item Response Theory Proficiency Estimators to Atypical Response Behaviors under Two-Stage Multistage Testing. ETS GRE® Board Research Report. ETS GRE®-16-03. ETS Research Report No. RR-16-22

ERIC Educational Resources Information Center

Kim, Sooyeon; Moses, Tim

2016-01-01

The purpose of this study is to evaluate the extent to which item response theory (IRT) proficiency estimation methods are robust to the presence of aberrant responses under the "GRE"® General Test multistage adaptive testing (MST) design. To that end, a wide range of atypical response behaviors affecting as much as 10% of the test items…

Advanced probabilistic methods for quantifying the effects of various uncertainties in structural response

NASA Technical Reports Server (NTRS)

Nagpal, Vinod K.

1988-01-01

The effects of actual variations, also called uncertainties, in geometry and material properties on the structural response of a space shuttle main engine turbopump blade are evaluated. A normal distribution was assumed to represent the uncertainties statistically. Uncertainties were assumed to be totally random, partially correlated, and fully correlated. The magnitude of these uncertainties were represented in terms of mean and variance. Blade responses, recorded in terms of displacements, natural frequencies, and maximum stress, was evaluated and plotted in the form of probabilistic distributions under combined uncertainties. These distributions provide an estimate of the range of magnitudes of the response and probability of occurrence of a given response. Most importantly, these distributions provide the information needed to estimate quantitatively the risk in a structural design.

Design and numerical evaluation of full-authority flight control systems for conventional and thruster-augmented helicopters employed in NOE operations

NASA Technical Reports Server (NTRS)

Perri, Todd A.; Mckillip, R. M., Jr.; Curtiss, H. C., Jr.

1987-01-01

The development and methodology is presented for development of full-authority implicit model-following and explicit model-following optimal controllers for use on helicopters operating in the Nap-of-the Earth (NOE) environment. Pole placement, input-output frequency response, and step input response were used to evaluate handling qualities performance. The pilot was equipped with velocity-command inputs. A mathematical/computational trajectory optimization method was employed to evaluate the ability of each controller to fly NOE maneuvers. The method determines the optimal swashplate and thruster input histories from the helicopter's dynamics and the prescribed geometry and desired flying qualities of the maneuver. Three maneuvers were investigated for both the implicit and explicit controllers with and without auxiliary propulsion installed: pop-up/dash/descent, bob-up at 40 knots, and glideslope. The explicit controller proved to be superior to the implicit controller in performance and ease of design.

The State of Evaluation in Internal Medicine Residency

PubMed Central

Holmboe, Eric; Beasley, Brent W.

2008-01-01

Background There are no nationwide data on the methods residency programs are using to assess trainee competence. The Accreditation Council for Graduate Medical Education (ACGME) has recommended tools that programs can use to evaluate their trainees. It is unknown if programs are adhering to these recommendations. Objective To describe evaluation methods used by our nation’s internal medicine residency programs and assess adherence to ACGME methodological recommendations for evaluation. Design Nationwide survey. Participants All internal medicine programs registered with the Association of Program Directors of Internal Medicine (APDIM). Measurements Descriptive statistics of programs and tools used to evaluate competence; compliance with ACGME recommended evaluative methods. Results The response rate was 70%. Programs were using an average of 4.2–6.0 tools to evaluate their trainees with heavy reliance on rating forms. Direct observation and practice and data-based tools were used much less frequently. Most programs were using at least 1 of the Accreditation Council for Graduate Medical Education (ACGME)’s “most desirable” methods of evaluation for all 6 measures of trainee competence. These programs had higher support staff to resident ratios than programs using less desirable evaluative methods. Conclusions Residency programs are using a large number and variety of tools for evaluating the competence of their trainees. Most are complying with ACGME recommended methods of evaluation especially if the support staff to resident ratio is high. PMID:18612734

Global antioxidant response of meat.

PubMed

Carrillo, Celia; Barrio, Ángela; Del Mar Cavia, María; Alonso-Torre, Sara

2017-06-01

The global antioxidant response (GAR) method uses an enzymatic digestion to release antioxidants from foods. Owing to the importance of digestion for protein breakdown and subsequent release of bioactive compounds, the aim of the present study was to compare the GAR method for meat with the existing methodologies: the extraction-based method and QUENCHER. Seven fresh meats were analyzed using ABTS and FRAP assays. Our results indicated that the GAR of meat was higher than the total antioxidant capacity (TAC) assessed with the traditional extraction-based method. When evaluated with GAR, the thermal treatment led to an increase in the TAC of the soluble fraction, contrasting with a decreased TAC after cooking measured using the extraction-based method. The effect of thermal treatment on the TAC assessed by the QUENCHER method seemed to be dependent on the assay applied, since results from ABTS differed from FRAP. Our results allow us to hypothesize that the activation of latent bioactive peptides along the gastrointestinal tract should be taken into consideration when evaluating the TAC of meat. Therefore, we conclude that the GAR method may be more appropriate for assessing the TAC of meat than the existing, most commonly used methods. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

A general enhancement of autonomic and cortisol responses during social evaluative threat

PubMed Central

Bosch, Jos A.; de Geus, Eco J.C.; Carroll, Douglas; Goedhart, Annebet D.; Anane, Leila A.; van Zanten, Jet J Veldhuizen; Helmerhorst, Eva J.; Edwards, Kate M.

2013-01-01

Objective The idea that distinct psychosocial factors may underlie specific patterns of neuroendocrine stress responses has been a topic of recurrent debate. We examined a recent contribution to this debate, the Social Self Preservation Theory, which predicts that stressors involving social evaluative threat (SET) characteristically activate the hypothalamic-pituitary-adrenal (HPA) axis. Methods Sixty-one healthy university students (31 females) performed a challenging speech task in one of three conditions that aimed to impose increasing levels of SET: performing the task alone (no social evaluation), with 1 evaluating observer, or with 4 evaluating observers. Indices of sympathetic (pre-ejection period) and parasympathetic (heart rate variability) cardiac drive were obtained by impedance- and electrocardiography. Salivary cortisol was used to index HPA activity. Questionnaires assessed affective responses. Results Affective responses (shame/embarrassment, anxiety, negative affect, and self-esteem), cortisol, heart rate, sympathetic, and parasympathetic activation all differentiated evaluative from non-evaluative task conditions (p<.001). The largest effect-sizes were observed for cardiac autonomic responses. Physiological reactivity increased in parallel with increasing audience size (p<.001). A rise in cortisol was predicted by sympathetic activation during the task (p<.001), but not by affective responses. Conclusion It would appear that SET determines the magnitude, rather than the pattern, of physiological activation. This potential to broadly perturb multiple physiological systems may help explain why social stress has been associated with a range of health outcomes. We propose a threshold-activation model as a physiological explanation for why engaging stressors, such as those involving social evaluation or uncontrollability, may appear to selectively induce cortisol release. PMID:19779143

Estimating neural response functions from fMRI

PubMed Central

Kumar, Sukhbinder; Penny, William

2014-01-01

This paper proposes a methodology for estimating Neural Response Functions (NRFs) from fMRI data. These NRFs describe non-linear relationships between experimental stimuli and neuronal population responses. The method is based on a two-stage model comprising an NRF and a Hemodynamic Response Function (HRF) that are simultaneously fitted to fMRI data using a Bayesian optimization algorithm. This algorithm also produces a model evidence score, providing a formal model comparison method for evaluating alternative NRFs. The HRF is characterized using previously established “Balloon” and BOLD signal models. We illustrate the method with two example applications based on fMRI studies of the auditory system. In the first, we estimate the time constants of repetition suppression and facilitation, and in the second we estimate the parameters of population receptive fields in a tonotopic mapping study. PMID:24847246

Pre-Then-Post Testing: A Tool To Improve the Accuracy of Management Training Program Evaluation.

ERIC Educational Resources Information Center

Mezoff, Bob

1981-01-01

Explains a procedure to avoid the detrimental biases of conventional self-reports of training outcomes. The evaluation format provided is a method for using statistical procedures to increase the accuracy of self-reports by overcoming response-shift-bias. (Author/MER)

A Comparison of Web-Based and Paper-Based Survey Methods: Testing Assumptions of Survey Mode and Response Cost

ERIC Educational Resources Information Center

Greenlaw, Corey; Brown-Welty, Sharon

2009-01-01

Web-based surveys have become more prevalent in areas such as evaluation, research, and marketing research to name a few. The proliferation of these online surveys raises the question, how do response rates compare with traditional surveys and at what cost? This research explored response rates and costs for Web-based surveys, paper surveys, and…

Early detection of disease program: Evaluation of the cellular immune response

NASA Technical Reports Server (NTRS)

Criswell, B. S.; Knight, V.; Martin, R. R.; Kasel, J. A.

1974-01-01

The early cellular responses of specific components of the leukocyte and epithelial cell populations to foreign challenges of both an infectious and noninfectious character were evaluated. Procedures for screening potential flight crews were developed, documented, and tested on a control population. Methods for preparing suitable populations of lymphocytes, polymorphonuclear leukocytes, macrophages, and epithelial cells were first established and evaluated. Epithelial cells from viral infected individuals were screened with a number of anti-viral antisera. This procedure showed the earliest indication of disease as well as providing a specific diagnosis to the physicians. Both macrophages and polymorphonuclear leukocytes were studied from normal individuals, smokers, and patients with viral infections. Newer techniques enabling better definition of lymphocyte subpopulations were then developed, namely the E and EAC rosette procedures for recognition of T (thymus-derived) and B (bone-marrow-derived) lymphocyte subpopulations. Lymphocyte and lymphocyte subpopulation response to multiple mitogens have been evaluated.

Usability and feasibility of mobile phone diaries in an experimental physical exercise study.

PubMed

Heinonen, Reetta; Luoto, Riitta; Lindfors, Pirjo; Nygård, Clas-Håkan

2012-03-01

Wireless and mobile phone technology as a method of data collection will increase alongside conventional methods. The aim of the present study was to evaluate the use of a mobile phone application for recording symptoms and physical activity exertion during an experimental physical exercise study. An experimental study on the effects of physical exercise on the well-being of menopausal women included 158 subjects between 44 and 63 years of age. The women were randomized into intervention and control groups. All participants in both groups reported daily symptoms by responding to morning and evening questionnaires via mobile phones. The usability of the mobile phone as a data collector tool was evaluated with the System Usability Scale (SUS) questionnaire 2 months after the intervention. The feasibility evaluation was based on the frequency of responses and open questions. The response rates were about 70% to both morning and evening questionnaires. The average frequency of responses (n =158) to morning questionnaires was 125 (±40)/170 (±14) and to evening questionnaires was 118 (±40)/171 (±14). The response rate did not differ between the intervention and the control groups. The SUS score was on average 75.4 (range, 0-100; n =107). A mobile phone diary is a feasible and usable tool for data collection in clinical trials.

Loss Factor Estimation Using the Impulse Response Decay Method on a Stiffened Structure

NASA Technical Reports Server (NTRS)

Cabell, Randolph; Schiller, Noah; Allen, Albert; Moeller, Mark

2009-01-01

High-frequency vibroacoustic modeling is typically performed using energy-based techniques such as Statistical Energy Analysis (SEA). Energy models require an estimate of the internal damping loss factor. Unfortunately, the loss factor is difficult to estimate analytically, and experimental methods such as the power injection method can require extensive measurements over the structure of interest. This paper discusses the implications of estimating damping loss factors using the impulse response decay method (IRDM) from a limited set of response measurements. An automated procedure for implementing IRDM is described and then evaluated using data from a finite element model of a stiffened, curved panel. Estimated loss factors are compared with loss factors computed using a power injection method and a manual curve fit. The paper discusses the sensitivity of the IRDM loss factor estimates to damping of connected subsystems and the number and location of points in the measurement ensemble.

48 CFR 44.303 - Extent of review.

Code of Federal Regulations, 2010 CFR

2010-10-01

... performance under that system. Special attention shall be given to— (a) The results of market research... methods of obtaining certified cost or pricing data, and data other than certified cost or pricing data; (d) Methods of evaluating subcontractor responsibility, including the contractor's use of the...

A comparison of methods to evaluate gray scale response of tomosynthesis systems using a software breast phantom

NASA Astrophysics Data System (ADS)

Sousa, Maria A. Z.; Bakic, Predrag R.; Schiabel, Homero; Maidment, Andrew D. A.

2017-03-01

Digital breast tomosynthesis (DBT) has been shown to be an effective imaging tool for breast cancer diagnosis as it provides three-dimensional images of the breast with minimal tissue overlap. The quality of the reconstructed image depends on many factors that can be assessed using uniform or realistic phantoms. In this paper, we created four models of phantoms using an anthropomorphic software breast phantom and compared four methods to evaluate the gray scale response in terms of the contrast, noise and detectability of adipose and glandular tissues binarized according to phantom ground truth. For each method, circular regions of interest (ROIs) were selected with various sizes, quantity and positions inside a square area in the phantom. We also estimated the percent density of the simulated breast and the capability of distinguishing both tissues by receiver operating characteristic (ROC) analysis. Results shows a sensitivity of the methods to the ROI size, placement and to the slices considered.

Performance analysis of different tuning rules for an isothermal CSTR using integrated EPC and SPC

NASA Astrophysics Data System (ADS)

Roslan, A. H.; Karim, S. F. Abd; Hamzah, N.

2018-03-01

This paper demonstrates the integration of Engineering Process Control (EPC) and Statistical Process Control (SPC) for the control of product concentration of an isothermal CSTR. The objectives of this study are to evaluate the performance of Ziegler-Nichols (Z-N), Direct Synthesis, (DS) and Internal Model Control (IMC) tuning methods and determine the most effective method for this process. The simulation model was obtained from past literature and re-constructed using SIMULINK MATLAB to evaluate the process response. Additionally, the process stability, capability and normality were analyzed using Process Capability Sixpack reports in Minitab. Based on the results, DS displays the best response for having the smallest rise time, settling time, overshoot, undershoot, Integral Time Absolute Error (ITAE) and Integral Square Error (ISE). Also, based on statistical analysis, DS yields as the best tuning method as it exhibits the highest process stability and capability.

Optimized Vertex Method and Hybrid Reliability

NASA Technical Reports Server (NTRS)

Smith, Steven A.; Krishnamurthy, T.; Mason, B. H.

2002-01-01

A method of calculating the fuzzy response of a system is presented. This method, called the Optimized Vertex Method (OVM), is based upon the vertex method but requires considerably fewer function evaluations. The method is demonstrated by calculating the response membership function of strain-energy release rate for a bonded joint with a crack. The possibility of failure of the bonded joint was determined over a range of loads. After completing the possibilistic analysis, the possibilistic (fuzzy) membership functions were transformed to probability density functions and the probability of failure of the bonded joint was calculated. This approach is called a possibility-based hybrid reliability assessment. The possibility and probability of failure are presented and compared to a Monte Carlo Simulation (MCS) of the bonded joint.

Monitoring and evaluation of strategic change programme implementation-Lessons from a case analysis.

PubMed

Neumann, Jan; Robson, Andrew; Sloan, Diane

2018-02-01

This study considered the monitoring and evaluation of a large-scale and domestic and global strategic change programme implementation. It considers the necessary prerequisites to overcome challenges and barriers that prevent systematic and effective monitoring and evaluation to take place alongside its operationalisation. The work involves a case study based on a major industrial company from the energy sector. The change programme makes particular reference to changes in business models, business processes, organisation structures as well as Enterprise Resource Planning infrastructure. The case study focussed on the summative evaluation of the programme post-implementation. This assessment involved 25 semi-structured interviews with employees across a range of managerial strata capturing more than 65 roles within the change programme at both local and global levels. Data relating to their perception of evaluation effectiveness and shortcomings were analysed by means of template analysis. The study identifies responsibilities for executing an evaluation alongside various methods and tools that are appropriate, thereby focussing on the "Who" (roles, responsibility for particular activities) and "How" (methods and tools) rather than "What" to monitor and evaluate. The findings are presented generically so they offer new insights and transferability for practitioners involved in managing strategic change and its associated evaluation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Characterizing the functional MRI response using Tikhonov regularization.

PubMed

Vakorin, Vasily A; Borowsky, Ron; Sarty, Gordon E

2007-09-20

The problem of evaluating an averaged functional magnetic resonance imaging (fMRI) response for repeated block design experiments was considered within a semiparametric regression model with autocorrelated residuals. We applied functional data analysis (FDA) techniques that use a least-squares fitting of B-spline expansions with Tikhonov regularization. To deal with the noise autocorrelation, we proposed a regularization parameter selection method based on the idea of combining temporal smoothing with residual whitening. A criterion based on a generalized chi(2)-test of the residuals for white noise was compared with a generalized cross-validation scheme. We evaluated and compared the performance of the two criteria, based on their effect on the quality of the fMRI response. We found that the regularization parameter can be tuned to improve the noise autocorrelation structure, but the whitening criterion provides too much smoothing when compared with the cross-validation criterion. The ultimate goal of the proposed smoothing techniques is to facilitate the extraction of temporal features in the hemodynamic response for further analysis. In particular, these FDA methods allow us to compute derivatives and integrals of the fMRI signal so that fMRI data may be correlated with behavioral and physiological models. For example, positive and negative hemodynamic responses may be easily and robustly identified on the basis of the first derivative at an early time point in the response. Ultimately, these methods allow us to verify previously reported correlations between the hemodynamic response and the behavioral measures of accuracy and reaction time, showing the potential to recover new information from fMRI data. 2007 John Wiley & Sons, Ltd

Aircraft digital control design methods

NASA Technical Reports Server (NTRS)

Powell, J. D.; Parsons, E.; Tashker, M. G.

1976-01-01

Variations in design methods for aircraft digital flight control are evaluated and compared. The methods fall into two categories; those where the design is done in the continuous domain (or s plane) and those where the design is done in the discrete domain (or z plane). Design method fidelity is evaluated by examining closed loop root movement and the frequency response of the discretely controlled continuous aircraft. It was found that all methods provided acceptable performance for sample rates greater than 10 cps except the uncompensated s plane design method which was acceptable above 20 cps. A design procedure based on optimal control methods was proposed that provided the best fidelity at very slow sample rates and required no design iterations for changing sample rates.

HyperCard to SPSS: improving data integrity.

PubMed

Gostel, R

1993-01-01

This article describes a database design that captures responses in a HyperCard stack and moves the data to SPSS for the Macintosh without the need to rekey data. Pregnant women used an interactive computer application with a touch screen to answer questions and receive educational information about fetal alcohol syndrome. A database design was created to capture survey responses through interaction with a computer by a sample of prenatal women during formative evaluation trials. The author does not compare this method of data collection to other methods. This article simply describes the method of data collection as a useful research tool.

Improving Your Exploratory Factor Analysis for Ordinal Data: A Demonstration Using FACTOR

ERIC Educational Resources Information Center

Baglin, James

2014-01-01

Exploratory factor analysis (EFA) methods are used extensively in the field of assessment and evaluation. Due to EFA's widespread use, common methods and practices have come under close scrutiny. A substantial body of literature has been compiled highlighting problems with many of the methods and practices used in EFA, and, in response, many…

A Chemiluminescence Detector for Ozone Measurement.

ERIC Educational Resources Information Center

Carroll, H.; And Others

An ozone detector was built and evaluated for its applicability in smog chamber studies. The detection method is based on reaction of ozone with ethylene and measurement of resultant chemiluminescence. In the first phase of evaluation, the detector's response to ozone was studied as a function of several instrument parameters, and optimum…

Assessing Faculty Performance: A Test of Method.

ERIC Educational Resources Information Center

Clark, Mary Jo; Blackburn, Robert T.

A methodology for evaluating faculty work performance was discussed, using data obtained from a typical liberal arts college faculty. Separate evaluations of teaching effectiveness and of overall contributions to the college for 45 full-time faculty (85% response rate) were collected from administrators, faculty colleagues, students, and from the…

Decision support systems for ecosystem management: An evaluation of existing systems

Treesearch

H. Todd Mowrer; Klaus Barber; Joe Campbell; Nick Crookston; Cathy Dahms; John Day; Jim Laacke; Jim Merzenich; Steve Mighton; Mike Rauscher; Rick Sojda; Joyce Thompson; Peter Trenchi; Mark Twery

1997-01-01

This report evaluated 24 computer-aided decision support systems (DSS) that can support management decision-making in forest ecosystems. It compares the scope of each system, spatial capabilities, computational methods, development status, input and output requirements, user support availability, and system performance. Questionnaire responses from the DSS developers (...

Evaluating the Multicultural Curriculum: Student's Perspectives.

ERIC Educational Resources Information Center

Jeffcoate, Robert

1981-01-01

Reports results of a case study which evaluated middle-school students' responses to a cultural awareness unit on India. The class consisted of one Jamaican, ten Indians, and seven English students. Privately taped discussions indicate that the teacher's methods led white students to believe that their views were inadmissable in the classroom. (KC)

An improved algorithm for evaluating trellis phase codes

NASA Technical Reports Server (NTRS)

Mulligan, M. G.; Wilson, S. G.

1982-01-01

A method is described for evaluating the minimum distance parameters of trellis phase codes, including CPFSK, partial response FM, and more importantly, coded CPM (continuous phase modulation) schemes. The algorithm provides dramatically faster execution times and lesser memory requirements than previous algorithms. Results of sample calculations and timing comparisons are included.

An improved algorithm for evaluating trellis phase codes

NASA Technical Reports Server (NTRS)

Mulligan, M. G.; Wilson, S. G.

1984-01-01

A method is described for evaluating the minimum distance parameters of trellis phase codes, including CPFSK, partial response FM, and more importantly, coded CPM (continuous phase modulation) schemes. The algorithm provides dramatically faster execution times and lesser memory requirements than previous algorithms. Results of sample calculations and timing comparisons are included.

Dynamic Evaluation of Regional Air Quality Model's Response to Emission Reductions in the Presence of Uncertain Emission Inventories

EPA Science Inventory

A method is presented and applied for evaluating an air quality model’s changes in pollutant concentrations stemming from changes in emissions while explicitly accounting for the uncertainties in the base emission inventory. Specifically, the Community Multiscale Air Quality (CMA...

76 FR 12979 - Submission for OMB Review: Comment Request; Questionnaire Cognitive Interviewing and Pretesting...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-09

... cognitive interviews, focus groups, Pilot household interviews, and experimental research in laboratory and field settings, both for applied questionnaire evaluation and more basic research on response errors in surveys. The most common evaluation method is the cognitive interview, in which a questionnaire design...

A method for evaluating horizontal well pumping tests.

PubMed

Langseth, David E; Smyth, Andrew H; May, James

2004-01-01

Predicting the future performance of horizontal wells under varying pumping conditions requires estimates of basic aquifer parameters, notably transmissivity and storativity. For vertical wells, there are well-established methods for estimating these parameters, typically based on either the recovery from induced head changes in a well or from the head response in observation wells to pumping in a test well. Comparable aquifer parameter estimation methods for horizontal wells have not been presented in the ground water literature. Formation parameter estimation methods based on measurements of pressure in horizontal wells have been presented in the petroleum industry literature, but these methods have limited applicability for ground water evaluation and are based on pressure measurements in only the horizontal well borehole, rather than in observation wells. This paper presents a simple and versatile method by which pumping test procedures developed for vertical wells can be applied to horizontal well pumping tests. The method presented here uses the principle of superposition to represent the horizontal well as a series of partially penetrating vertical wells. This concept is used to estimate a distance from an observation well at which a vertical well that has the same total pumping rate as the horizontal well will produce the same drawdown as the horizontal well. This equivalent distance may then be associated with an observation well for use in pumping test algorithms and type curves developed for vertical wells. The method is shown to produce good results for confined aquifers and unconfined aquifers in the absence of delayed yield response. For unconfined aquifers, the presence of delayed yield response increases the method error.

An evaluation of analog and numerical techniques for unsteady heat transfer measurement with thin-film gauges in transient facilities

NASA Technical Reports Server (NTRS)

George, William K.; Rae, William J.; Woodward, Scott H.

1991-01-01

The importance of frequency response considerations in the use of thin-film gages for unsteady heat transfer measurements in transient facilities is considered, and methods for evaluating it are proposed. A departure frequency response function is introduced and illustrated by an existing analog circuit. A Fresnel integral temperature which possesses the essential features of the film temperature in transient facilities is introduced and is used to evaluate two numerical algorithms. Finally, criteria are proposed for the use of finite-difference algorithms for the calculation of the unsteady heat flux from a sampled temperature signal.

Assessment of Psychophysiological Responses During Motion Sickness Testing

NASA Technical Reports Server (NTRS)

Stoud, Cynthia S.; Toscano, William B.; Cowings, Patricia; Freidman, Gary

1994-01-01

The purpose of this investigation is to evaluate a methodology designed to accurately trace the temporal progression of motion sickness and space motion sickness symptoms. With this method, subjects continuously monitor their own motion sickness symptoms during exposure to a provocative stimulus as symptoms occur, in contrast to previous methods during which subjects report symptoms verbally at discrete time intervals. This method not only is comparable to previous methods in the type of symptoms that subjects report, but subjects report symptoms more frequently. Frequent reporting of motion sickness symptoms allows researchers to detail the waxing and waning of motion sickness symptoms for each individual. Previous research has shown that physiological responses to motion sickness stimuli are characterized by unique individual differences in response patterns. By improving our assessment of motion sickness symptoms with continuous monitoring of symptoms, the relationship between specific physiological responses and sickness levels can be more accurately determined for each individual. Results from this study show significant positive relationships between skin conductance levels and symptom levels for ten individuals; a significant positive relationship between temperature and symptom levels for 5 of 10 individuals; and both positive and negative relationships between respiration, heart rate, blood volume pulse and symptom levels. Continuous monitoring of motion sickness symptoms can be used to more accurately assess motion sickness to aid in the evaluation of countermeasures. In addition, recognition of the onset of symptoms that are strongly related to specific physiological responses could be used as cues to initiate procedures (e.g., Autogenic Feedback Training) to prevent the development of severe motion sickness symptoms.

Development of higher-order modal methods for transient thermal and structural analysis

NASA Technical Reports Server (NTRS)

Camarda, Charles J.; Haftka, Raphael T.

1989-01-01

A force-derivative method which produces higher-order modal solutions to transient problems is evaluated. These higher-order solutions converge to an accurate response using fewer degrees-of-freedom (eigenmodes) than lower-order methods such as the mode-displacement or mode-acceleration methods. Results are presented for non-proportionally damped structural problems as well as thermal problems modeled by finite elements.

An Evaluation of Observational Methods for Measuring Response to Classwide Intervention

ERIC Educational Resources Information Center

Briesch, Amy M.; Hemphill, Elizabeth M.; Volpe, Robert J.; Daniels, Brian

2015-01-01

Although there is much research to support the effectiveness of classwide interventions aimed at improving student engagement, there is also a great deal of variability in terms of how response to group-level intervention has been measured. The unfortunate consequence of this procedural variability is that it is difficult to determine whether…

Item Response Theory with Estimation of the Latent Density Using Davidian Curves

ERIC Educational Resources Information Center

Woods, Carol M.; Lin, Nan

2009-01-01

Davidian-curve item response theory (DC-IRT) is introduced, evaluated with simulations, and illustrated using data from the Schedule for Nonadaptive and Adaptive Personality Entitlement scale. DC-IRT is a method for fitting unidimensional IRT models with maximum marginal likelihood estimation, in which the latent density is estimated,…

Evaluation of the Wise Guys Male Responsibility Curriculum: Participant-Control Comparisons

ERIC Educational Resources Information Center

Gruchow, Harvey William; Brown, Roger K.

2011-01-01

Background: Although males are often the initiators of teen sexual activity, pregnancy prevention programs generally target females. To address this deficiency, the Wise Guys Male Responsibility Curriculum was developed to be delivered to adolescent males in weekly classroom sessions. Methods: Seventh grade participants (n = 124) in the Wise Guys…

Agreement among Response to Intervention Criteria for Identifying Responder Status

ERIC Educational Resources Information Center

Barth, Amy E.; Stuebing, Karla K.; Anthony, Jason L.; Denton, Carolyn A.; Mathes, Patricia G.; Fletcher, Jack M.; Francis, David J.

2008-01-01

In order to better understand the extent to which operationalizations of response to intervention (RTI) overlap and agree in identifying adequate and inadequate responders, an existing database of 399 first grade students was evaluated in relation to cut-points, measures, and methods frequently cited for the identification of inadequate responders…

Interteach and Student Engagement in Political Science

ERIC Educational Resources Information Center

Slagter, Tracy H.; Scribner, Druscilla L.

2014-01-01

"Interteach" is a method of guided discussion and feedback developed by Thomas Boyce and Philip Hineline in 2002. This method, primarily used in the psychology classroom, encourages greater student engagement and responsibility for learning by requiring extensive student preparation, peer-to-peer instruction, and peer evaluation. How can…

Critical evaluations of vegetation cover measurement techniques: a response to Thacker et al. (2015)

USDA-ARS?s Scientific Manuscript database

Comparison studies are necessary to reconcile methods that have arisen among disparate rangeland monitoring programs. However, Thacker et al.'s study comparing Daubenmire frame (DF) and line-point intercept (LPI) methods for estimating vegetation cover ignores definitional differences between what t...

A Qualitative Evaluation of an Online Expert-Facilitated Course on Tobacco Dependence Treatment.

PubMed

Ebn Ahmady, Arezoo; Barker, Megan; Dragonetti, Rosa; Fahim, Myra; Selby, Peter

2017-01-01

Qualitative evaluations of courses prove difficult due to low response rates. Online courses may permit the analysis of qualitative feedback provided by health care providers (HCPs) during and after the course is completed. This study describes the use of qualitative methods for an online continuing medical education (CME) course through the analysis of HCP feedback for the purpose of quality improvement. We used formative and summative feedback from HCPs about their self-reported experiences of completing an online expert-facilitated course on tobacco dependence treatment (the Training Enhancement in Applied Cessation Counselling and Health [TEACH] Project). Phenomenological, inductive, and deductive approaches were applied to develop themes. QSR NVivo 11 was used to analyze the themes derived from free-text comments and responses to open-ended questions. A total of 277 out of 287 participants (96.5%) completed the course evaluations and provided 690 comments focused on how to improve the program. Five themes emerged from the formative evaluations: overall quality, content, delivery method, support, and time. The majority of comments (22.6%) in the formative evaluation expressed satisfaction with overall course quality. Suggestions for improvement were mostly for course content and delivery method (20.4% and 17.8%, respectively). Five themes emerged from the summative evaluation: feedback related to learning objectives, interprofessional collaboration, future topics of relevance, overall modifications, and overall satisfaction. Comments on course content, website function, timing, and support were the identified areas for improvement. This study provides a model to evaluate the effectiveness of online educational interventions. Significantly, this constructive approach to evaluation allows CME providers to take rapid corrective action.

A Qualitative Evaluation of an Online Expert-Facilitated Course on Tobacco Dependence Treatment

PubMed Central

Ebn Ahmady, Arezoo; Barker, Megan; Dragonetti, Rosa; Fahim, Myra; Selby, Peter

2017-01-01

Qualitative evaluations of courses prove difficult due to low response rates. Online courses may permit the analysis of qualitative feedback provided by health care providers (HCPs) during and after the course is completed. This study describes the use of qualitative methods for an online continuing medical education (CME) course through the analysis of HCP feedback for the purpose of quality improvement. We used formative and summative feedback from HCPs about their self-reported experiences of completing an online expert-facilitated course on tobacco dependence treatment (the Training Enhancement in Applied Cessation Counselling and Health [TEACH] Project). Phenomenological, inductive, and deductive approaches were applied to develop themes. QSR NVivo 11 was used to analyze the themes derived from free-text comments and responses to open-ended questions. A total of 277 out of 287 participants (96.5%) completed the course evaluations and provided 690 comments focused on how to improve the program. Five themes emerged from the formative evaluations: overall quality, content, delivery method, support, and time. The majority of comments (22.6%) in the formative evaluation expressed satisfaction with overall course quality. Suggestions for improvement were mostly for course content and delivery method (20.4% and 17.8%, respectively). Five themes emerged from the summative evaluation: feedback related to learning objectives, interprofessional collaboration, future topics of relevance, overall modifications, and overall satisfaction. Comments on course content, website function, timing, and support were the identified areas for improvement. This study provides a model to evaluate the effectiveness of online educational interventions. Significantly, this constructive approach to evaluation allows CME providers to take rapid corrective action. PMID:28992759

Accuracy of rapid radiographic film calibration for intensity‐modulated radiation therapy verification

PubMed Central

Kulasekere, Ravi; Moran, Jean M.; Fraass, Benedick A.; Roberson, Peter L.

2006-01-01

A single calibration film method was evaluated for use with intensity‐modulated radiation therapy film quality assurance measurements. The single‐film method has the potential advantages of exposure simplicity, less media consumption, and improved processor quality control. Potential disadvantages include cross contamination of film exposure, implementation effort to document delivered dose, and added complication of film response analysis. Film response differences were measured between standard and single‐film calibration methods. Additional measurements were performed to help trace causes for the observed discrepancies. Kodak X‐OmatV (XV) film was found to have greater response variability than extended dose range (EDR) film. We found it advisable for XV film to relate the film response calibration for the single‐film method to a user‐defined optimal calibration geometry. Using a single calibration film exposed at the time of experiment, the total uncertainty of film response was estimated to be <2% (1%) for XV (EDR) film at 50 (100) cGy and higher, respectively. PACS numbers: 87.53.‐j, 87.53.Dq PMID:17533325

Soil Oxidation-Reduction in Wetlands and Its Impact on Plant Functioning

PubMed Central

Pezeshki, S. R.; DeLaune, R. D.

2012-01-01

Soil flooding in wetlands is accompanied by changes in soil physical and chemical characteristics. These changes include the lowering of soil redox potential (Eh) leading to increasing demand for oxygen within the soil profile as well as production of soil phytotoxins that are by-products of soil reduction and thus, imposing potentially severe stress on plant roots. Various methods are utilized for quantifying plant responses to reducing soil conditions that include measurement of radial oxygen transport, plant enzymatic responses, and assessment of anatomical/morphological changes. However, the chemical properties and reducing nature of soil environment in which plant roots are grown, including oxygen demand, and other associated processes that occur in wetland soils, pose a challenge to evaluation and comparison of plant responses that are reported in the literature. This review emphasizes soil-plant interactions in wetlands, drawing attention to the importance of quantifying the intensity and capacity of soil reduction for proper evaluation of wetland plant responses, particularly at the process and whole-plant levels. Furthermore, while root oxygen-deficiency may partially account for plant stress responses, the importance of soil phytotoxins, produced as by-products of low soil Eh conditions, is discussed and the need for development of methods to allow differentiation of plant responses to reduced or anaerobic soil conditions vs. soil phytotoxins is emphasized. PMID:24832223

Capsicum--production, technology, chemistry, and quality. Part IV. Evaluation of quality.

PubMed

Govindarajan, V S; Rajalakshmi, D; Chand, N

1987-01-01

Capsicum fruits are popular worldwide and are used in the cuisines of both the developing and the developed countries. With its different varieties, forms, and uses, the spice capsicum contributes to the entire gamut of sensory experience--color as finely ground paprika powder or extract in sausages, goulash, cheese, and snacks; both pungency and color as the many varieties of chillies used in Mexican, African, Indian, and southeast Asian cuisines; color, aroma, and mild pungency as the fresh green chillies used in many of the growing countries; and appearance, color, aroma, and texture as fresh fruit in salads and as a pickled and canned product. In three earlier parts in this series, the varieties, cultivation, and primary processing; the processed products, world production, and trade; and the chemistry of the color, aroma, and pungency stimuli have been reviewed. In this part, the evaluation of quality through instrumental determination of the causal components and the sensory evaluation of color, aroma, and pungency are discussed. Several methods for quantitative determination of the stimuli and the sensory evaluation of the responses to the stimuli are reviewed. The problems of sensory evaluation of color, aroma, and pungency, the dominant attributes for validation of the instrumentally determined values for carotenoids, volatiles, or particular fractions, and total and individual capsaicinoids are specifically discussed. Summarized details of selected instrumental methods for evaluating the stimuli, which are either validated by correlation to sensorily perceived responses or to adopted standards, are given along with representative data obtained for discussing the adequacy and reliability of the methods. Pungency as a specific gustatory perception and the many methods proposed to evaluate this quality are discussed. A recommended objective procedure for obtaining reproducible values is discussed, and a method for relating different panel results is shown. With such a method, highly significant correlations have been shown between estimated total capsaicinoids and the determined pungency. The estimation of total capsaicinoids by any simple, reliable method is shown to be adequate for quality control of pungency of Capsicum fruits.

Challenges of teacher-based clinical evaluation from nursing students' point of view: Qualitative content analysis.

PubMed

Sadeghi, Tabandeh; Seyed Bagheri, Seyed Hamid

2017-01-01

Clinical evaluation is very important in the educational system of nursing. One of the most common methods of clinical evaluation is evaluation by the teacher, but the challenges that students would face in this evaluation method, have not been mentioned. Thus, this study aimed to explore the experiences and views of nursing students about the challenges of teacher-based clinical evaluation. This study was a descriptive qualitative study with a qualitative content analysis approach. Data were gathered through semi-structured focused group sessions with undergraduate nursing students who were passing their 8 th semester at Rafsanjan University of Medical Sciences. Date were analyzed using Graneheim and Lundman's proposed method. Data collection and analysis were concurrent. According to the findings, "factitious evaluation" was the main theme of study that consisted of three categories: "Personal preferences," "unfairness" and "shirking responsibility." These categories are explained using quotes derived from the data. According to the results of this study, teacher-based clinical evaluation would lead to factitious evaluation. Thus, changing this approach of evaluation toward modern methods of evaluation is suggested. The finding can help nursing instructors to get a better understanding of the nursing students' point of view toward this evaluation approach and as a result could be planning for changing of this approach.

Experiments with Writing to Teach Microbiology.

ERIC Educational Resources Information Center

Cannon, Robert E.

1990-01-01

Described are the experiences of one teacher with the teaching of writing in college level microbiology, virology, and immunology courses. Assignments, methods, evaluation, and student responses are discussed. (CW)

Adoptive Cell Therapy for Patients With Metastatic Melanoma: Evaluation of Intensive Myeloablative Chemoradiation Preparative Regimens

PubMed Central

Dudley, Mark E.; Yang, James C.; Sherry, Richard; Hughes, Marybeth S.; Royal, Richard; Kammula, Udai; Robbins, Paul F.; Huang, JianPing; Citrin, Deborah E.; Leitman, Susan F.; Wunderlich, John; Restifo, Nicholas P.; Thomasian, Armen; Downey, Stephanie G.; Smith, Franz O.; Klapper, Jacob; Morton, Kathleen; Laurencot, Carolyn; White, Donald E.; Rosenberg, Steven A.

2008-01-01

Purpose The two approved treatments for patients with metastatic melanoma, interleukin (IL)-2 and dacarbazine, mediate objective response rates of 12% to 15%. We previously reported that adoptive cell therapy (ACT) with autologous antitumor lymphocytes in lymphodepleted hosts mediated objective responses in 51% of 35 patients. Here, we update that study and evaluate the safety and efficacy of two increased-intensity myeloablative lymphodepleting regimens. Patients and Methods We performed two additional sequential trials of ACT with autologous tumor-infiltrating lymphocytes (TIL) in patients with metastatic melanoma. Increasing intensity of host preparative lymphodepletion consisting of cyclophosphamide and fludarabine with either 2 (25 patients) or 12 Gy (25 patients) of total-body irradiation (TBI) was administered before cell transfer. Objective response rates by Response Evaluation Criteria in Solid Tumors (RECIST) and survival were evaluated. Immunologic correlates of effective treatment were studied. Results Although nonmyeloablative chemotherapy alone showed an objective response rate of 49%, when 2 or 12 Gy of TBI was added, the response rates were 52% and 72% respectively. Responses were seen in all visceral sites including brain. There was one treatment-related death in the 93 patients. Host lymphodepletion was associated with increased serum levels of the lymphocyte homeostatic cytokines IL-7 and IL-15. Objective responses were correlated with the telomere length of the transferred cells. Conclusion Host lymphodepletion followed by autologous TIL transfer and IL-2 results in objective response rates of 50% to 70% in patients with metastatic melanoma refractory to standard therapies. PMID:18809613

The role of fluorine-18-fluorodeoxyglucose positron emission tomography in evaluating the response to tyrosine-kinase inhibitors in patients with metastatic primary renal cell carcinoma.

PubMed

Caldarella, Carmelo; Muoio, Barbara; Isgrò, Maria Antonietta; Porfiri, Emilio; Treglia, Giorgio; Giovanella, Luca

2014-09-01

Positron emission tomography-computed tomography (PET-CT) using fluorodeoxyglucose (FDG) is increasingly used in the evaluation of patients with advanced renal cell carcinoma (RCC), primarily for staging purposes. The aim of this paper is to perform a systematic review about the usefulness of PET-CT using FDG in response assessment after treatment with tyrosine-kinase inhibitors (TKIs) in patients with advanced RCC. The scientific literature about the role of PET-CT using FDG in the assessment of response to treatment with TKIs in patients affected by advanced RCC was systematically reviewed. Seven studies about the role of PET-CT using FDG in the response assessment after treatment with TKIs (essentially sunitinib and sorafenib) in advanced RCC were retrieved in full-text and analysed, to determine the predictive role of this morpho-functional imaging method on patient outcome. To date, the role of PET-CT using FDG in evaluating the response to TKIs in metastatic RCC patients is still not well defined, partly due to heterogeneity of available studies; however, PET-CT reveals potential role for the selection of patients undergoing therapy with TKIs. The use of contrast-enhanced PET-CT appears to be promising for a "multi-dimensional" evaluation of treatment response in these patients.

Dissociations between behavioural and functional magnetic resonance imaging-based evaluations of cognitive function after brain injury

PubMed Central

Bardin, Jonathan C.; Fins, Joseph J.; Katz, Douglas I.; Hersh, Jennifer; Heier, Linda A.; Tabelow, Karsten; Dyke, Jonathan P.; Ballon, Douglas J.; Schiff, Nicholas D.

2011-01-01

Functional neuroimaging methods hold promise for the identification of cognitive function and communication capacity in some severely brain-injured patients who may not retain sufficient motor function to demonstrate their abilities. We studied seven severely brain-injured patients and a control group of 14 subjects using a novel hierarchical functional magnetic resonance imaging assessment utilizing mental imagery responses. Whereas the control group showed consistent and accurate (for communication) blood-oxygen-level-dependent responses without exception, the brain-injured subjects showed a wide variation in the correlation of blood-oxygen-level-dependent responses and overt behavioural responses. Specifically, the brain-injured subjects dissociated bedside and functional magnetic resonance imaging-based command following and communication capabilities. These observations reveal significant challenges in developing validated functional magnetic resonance imaging-based methods for clinical use and raise interesting questions about underlying brain function assayed using these methods in brain-injured subjects. PMID:21354974

Nonlinear ultrasonic imaging method for closed cracks using subtraction of responses at different external loads.

PubMed

Ohara, Yoshikazu; Horinouchi, Satoshi; Hashimoto, Makoto; Shintaku, Yohei; Yamanaka, Kazushi

2011-08-01

To improve the selectivity of closed cracks for objects other than cracks in ultrasonic imaging, we propose an extension of a novel imaging method, namely, subharmonic phased array for crack evaluation (SPACE) as well as another approach using the subtraction of responses at different external loads. By applying external static or dynamic loads to closed cracks, the contact state in the cracks varies, resulting in an intensity change of responses at cracks. In contrast, objects other than cracks are independent of external load. Therefore, only cracks can be extracted by subtracting responses at different loads. In this study, we performed fundamental experiments on a closed fatigue crack formed in an aluminum alloy compact tension (CT) specimen using the proposed method. We examined the static load dependence of SPACE images and the dynamic load dependence of linear phased array (PA) images by simulating the external loads with a servohydraulic fatigue testing machine. By subtracting the images at different external loads, we show that this method is useful in extracting only the intensity change of responses related to closed cracks, while canceling the responses of objects other than cracks. Copyright © 2010 Elsevier B.V. All rights reserved.

The optimization of essential oils supercritical CO2 extraction from Lavandula hybrida through static-dynamic steps procedure and semi-continuous technique using response surface method

PubMed Central

Kamali, Hossein; Aminimoghadamfarouj, Noushin; Golmakani, Ebrahim; Nematollahi, Alireza

2015-01-01

Aim: The aim of this study was to examine and evaluate crucial variables in essential oils extraction process from Lavandula hybrida through static-dynamic and semi-continuous techniques using response surface method. Materials and Methods: Essential oil components were extracted from Lavandula hybrida (Lavandin) flowers using supercritical carbon dioxide via static-dynamic steps (SDS) procedure, and semi-continuous (SC) technique. Results: Using response surface method the optimum extraction yield (4.768%) was obtained via SDS at 108.7 bar, 48.5°C, 120 min (static: 8×15), 24 min (dynamic: 8×3 min) in contrast to the 4.620% extraction yield for the SC at 111.6 bar, 49.2°C, 14 min (static), 121.1 min (dynamic). Conclusion: The results indicated that a substantial reduction (81.56%) solvent usage (kg CO2/g oil) is observed in the SDS method versus the conventional SC method. PMID:25598636

Comparing different methods for fast screening of microbiological quality of beach sand aimed at rapid-response remediation.

PubMed

Testolin, Renan C; Almeida, Tito C M; Polette, Marcus; Branco, Joaquim O; Fischer, Larissa L; Niero, Guilherme; Poyer-Radetski, Gabriel; Silva, Valéria C; Somensi, Cleder A; Corrêa, Albertina X R; Corrêa, Rogério; Rörig, Leonardo R; Itokazu, Ana Gabriela; Férard, Jean-François; Cotelle, Sylvie; Radetski, Claudemir M

2017-05-15

There is scientific evidence that beach sands are a significant contributor to the pathogen load to which visitors are exposed. To develop beach quality guidelines all beach zones must be included in microbiological evaluations, but monitoring methods for beach sand quality are relatively longstanding, expensive, laborious and require moderate laboratory infrastructure. This paper aimed to evaluate the microorganism activity in different beach zones applying and comparing a classical method of membrane filtration (MF) with two colorimetric screening methods based on fluorescein (FDA) and tetrazolium (TTC) salt biotransformation to evaluate a new rapid and low-cost method for beach sand microbiological contamination assessments. The colorimetric results can help beach managers to evaluate rapidly and at low cost the microbiological quality of different beach zones in order to decide whether remedial actions need to be adopted to prevent exposure of the public to microbes due to beach sand and/or water contamination. Copyright © 2017. Published by Elsevier Ltd.

Analysis of Growth and Molecular Responses to Ethylene in Etiolated Rice Seedlings.

PubMed

Ma, Biao; Zhang, Jin-Song

2017-01-01

Ethylene plays a key role in various submergence responses of rice plants, but the mechanism of ethylene action remains largely unclear in rice. Regarding the differences between rice and Arabidopsis in ethylene-regulated processes, rice plants may possess divergent mechanisms in ethylene signaling in addition to the conserved aspects. Forward genetic analysis is essential to fully understand the ethylene signaling mechanism in rice. Here, we describe a method for screening ethylene-response mutants and evaluating ethylene responsiveness in etiolated rice seedlings.

Building an Evaluation Scale using Item Response Theory.

PubMed

Lalor, John P; Wu, Hao; Yu, Hong

2016-11-01

Evaluation of NLP methods requires testing against a previously vetted gold-standard test set and reporting standard metrics (accuracy/precision/recall/F1). The current assumption is that all items in a given test set are equal with regards to difficulty and discriminating power. We propose Item Response Theory (IRT) from psychometrics as an alternative means for gold-standard test-set generation and NLP system evaluation. IRT is able to describe characteristics of individual items - their difficulty and discriminating power - and can account for these characteristics in its estimation of human intelligence or ability for an NLP task. In this paper, we demonstrate IRT by generating a gold-standard test set for Recognizing Textual Entailment. By collecting a large number of human responses and fitting our IRT model, we show that our IRT model compares NLP systems with the performance in a human population and is able to provide more insight into system performance than standard evaluation metrics. We show that a high accuracy score does not always imply a high IRT score, which depends on the item characteristics and the response pattern.

Building an Evaluation Scale using Item Response Theory

PubMed Central

Lalor, John P.; Wu, Hao; Yu, Hong

2016-01-01

Evaluation of NLP methods requires testing against a previously vetted gold-standard test set and reporting standard metrics (accuracy/precision/recall/F1). The current assumption is that all items in a given test set are equal with regards to difficulty and discriminating power. We propose Item Response Theory (IRT) from psychometrics as an alternative means for gold-standard test-set generation and NLP system evaluation. IRT is able to describe characteristics of individual items - their difficulty and discriminating power - and can account for these characteristics in its estimation of human intelligence or ability for an NLP task. In this paper, we demonstrate IRT by generating a gold-standard test set for Recognizing Textual Entailment. By collecting a large number of human responses and fitting our IRT model, we show that our IRT model compares NLP systems with the performance in a human population and is able to provide more insight into system performance than standard evaluation metrics. We show that a high accuracy score does not always imply a high IRT score, which depends on the item characteristics and the response pattern.1 PMID:28004039

48 CFR 1845.506-70 - Responsibilities of the plant clearance officer.

Code of Federal Regulations, 2011 CFR

2011-10-01

... performance in property disposal activities; (h) Determining the method of disposal; (i) Surveillance of any contractor conducted sales; (j) Accounting for all contractor inventory reported by the contractor; (k... inventory; (l) Approving the method of sale, evaluating bids, and approving sale prices for any contractor...

Investigation on the forced response of a radial turbine under aerodynamic excitations

NASA Astrophysics Data System (ADS)

Ma, Chaochen; Huang, Zhi; Qi, Mingxu

2016-04-01

Rotor blades in a radial turbine with nozzle guide vanes typically experience harmonic aerodynamic excitations due to the rotor stator interaction. Dynamic stresses induced by the harmonic excitations can result in high cycle fatigue (HCF) of the blades. A reliable prediction method for forced response issue is essential to avoid the HCF problem. In this work, the forced response mechanisms were investigated based on a fluid structure interaction (FSI) method. Aerodynamic excitations were obtained by three-dimensional unsteady computational fluid dynamics (CFD) simulation with phase shifted periodic boundary conditions. The first two harmonic pressures were determined as the primary components of the excitation and applied to finite element (FE) model to conduct the computational structural dynamics (CSD) simulation. The computed results from the harmonic forced response analysis show good agreement with the predictions of Singh's advanced frequency evaluation (SAFE) diagram. Moreover, the mode superposition method used in FE simulation offers an efficient way to provide quantitative assessments of mode response levels and resonant strength.

Calculating the Responses of Self-Powered Radiation Detectors.

NASA Astrophysics Data System (ADS)

Thornton, D. A.

Available from UMI in association with The British Library. The aim of this research is to review and develop the theoretical understanding of the responses of Self -Powered Radiation Detectors (SPDs) in Pressurized Water Reactors (PWRs). Two very different models are considered. A simple analytic model of the responses of SPDs to neutrons and gamma radiation is presented. It is a development of the work of several previous authors and has been incorporated into a computer program (called GENSPD), the predictions of which have been compared with experimental and theoretical results reported in the literature. Generally, the comparisons show reasonable consistency; where there is poor agreement explanations have been sought and presented. Two major limitations of analytic models have been identified; neglect of current generation in insulators and over-simplified electron transport treatments. Both of these are developed in the current work. A second model based on the Explicit Representation of Radiation Sources and Transport (ERRST) is presented and evaluated for several SPDs in a PWR at beginning of life. The model incorporates simulation of the production and subsequent transport of neutrons, gamma rays and electrons, both internal and external to the detector. Neutron fluxes and fuel power ratings have been evaluated with core physics calculations. Neutron interaction rates in assembly and detector materials have been evaluated in lattice calculations employing deterministic transport and diffusion methods. The transport of the reactor gamma radiation has been calculated with Monte Carlo, adjusted diffusion and point-kernel methods. The electron flux associated with the reactor gamma field as well as the internal charge deposition effects of the transport of photons and electrons have been calculated with coupled Monte Carlo calculations of photon and electron transport. The predicted response of a SPD is evaluated as the sum of contributions from individual response mechanisms.

Thermally stimulated processes in samarium-modified lead titanate ferroelectric ceramics

NASA Astrophysics Data System (ADS)

Peláiz-Barranco, A.; García-Wong, A. C.; González-Abreu, Y.; Gagou, Y.; Saint-Grégoire, P.

2013-08-01

The thermally stimulated processes in a samarium-modified lead titanate ferroelectric system are analyzed from the thermally stimulated depolarization discharge current. The discharge due to the space charge injected during the poling process, the pyroelectric response and a conduction process related to oxygen vacancies are evaluated considering a theoretical decomposition by using a numerical method. The pyroelectric response is separated from other components to evaluate the polarization behavior and some pyroelectric parameters. High remanent polarization, pyroelectric coefficient and merit figure values are obtained at room temperature.

[Methodological approaches to the hygienic evaluation of total artificial lighting of classrooms with different light sources on the basis of the response of the cardiovascular system of schoolchildren].

PubMed

Teksheva, L M; Zvezdina, I V

2014-01-01

Hygienic evaluation of innovative equipment in educational institutions requires the use of appropriate methods permitting to establish valuable criterias for the effectiveness of the application of new technologies. The study of the response of the cardiovascular system of schoolchildren under using different light sources allowed to establish the increase in adaptive capacities and the improvement of the functional state of the organism in LED in comparison with fluorescent lighting.

Evaluation of the Responsiveness Index of the Family Health Strategy in rural areas.

PubMed

Shimizu, Helena Eri; Trindade, Josélia de Souza; Mesquita, Monique Santos de; Ramos, Maíra Catharina

2018-01-01

Objective To evaluate the responsiveness of Family Health Strategy units in the rural area of the Federal District registered in the National Program for Improvement of Access and Quality of Basic Care. Method Descriptive study, which used a questionnaire to evaluate the following dimensions: a) respect for people: dignity, confidentiality of information, autonomy, communication; b) customer orientation: facilities, choice of the professional, agile service and social support. Results The users' assessment of responsiveness was 0.755. The dimensions related to respect for people received an index of 0.814 and customer orientation was 0.599. Conclusion Care is given that shows respect for human dignity, but progress needs to be made in building confidentiality and the autonomy of users. Infrastructure is poor and care is not agile, highlighting the need for greater investments in rural areas.

SU-E-J-12: A New Stereological Method for Tumor Volume Evaluation for Esophageal Cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feng, Y; Tianjin Medical University Cancer Institute and Hospital; East Carolina University

2014-06-01

Purpose: Stereological method used to obtain three dimensional quantitative information from two dimensional images is a widely used tool in the study of cells and pathology. But the feasibility of the method for quantitative evaluation of volumes with 3D image data sets for radiotherapy clinical application has not been explored. On the other hand, a quick, easy-to-use and reliable method is highly desired in image-guided-radiotherapy(IGRT) for tumor volume measurement for the assessment of response to treatment. To meet this need, a stereological method for evaluating tumor volumes for esophageal cancer is presented in this abstract. Methods: The stereology method wasmore » optimized by selecting the appropriate grid point distances and sample types. 7 patients with esophageal cancer were selected retrospectively for this study, each having pre and post treatment computed tomography (CT) scans. Stereological measurements were performed for evaluating the gross tumor volume (GTV) changes after radiotherapy and the results was compared with the ones by planimetric measurements. Two independent observers evaluated the reproducibility for volume measurement using the new stereological technique. Results: The intraobserver variation in the GTV volume estimation was 3.42±1.68cm3 (the Wilcoxon matched-pairs test Resultwas Z=−1.726,P=0.084>0.05); the interobserver variation in the GTV volume estimation was 22.40±7.23 cm3 (Z=−3.296,P=0.083>0.05), which showed the consistency in GTV volume calculation with the new method for the same and different users. The agreement level between the results from the two techniques was also evaluated. Difference between the measured GTVs was 20.10±5.35 cm3 (Z=−3.101,P=0.089>0.05). Variation of the measurement results using the two techniques was low and clinically acceptable. Conclusion: The good agreement between stereological and planimetric techniques proves the reliability of the stereological tumor volume estimations. The optimized stereological technique described in this abstract may provide a quick, unbiased and reproducible tool for tumor volume estimation for treatment response assessment. Supported by NSFC (#81041107, #81171342 and #31000784)« less

System and method for non-destructive evaluation of surface characteristics of a magnetic material

DOEpatents

Jiles, David C.; Sipahi, Levent B.

1994-05-17

A system and a related method for non-destructive evaluation of the surface characteristics of a magnetic material. The sample is excited by an alternating magnetic field. The field frequency, amplitude and offset are controlled according to a predetermined protocol. The Barkhausen response of the sample is detected for the various fields and offsets and is analyzed. The system produces information relating to the frequency content, the amplitude content, the average or RMS energy content, as well as count rate information, for each of the Barkhausen responses at each of the excitation levels applied during the protocol. That information provides a contiguous body of data, heretofore unavailable, which can be analyzed to deduce information about the surface characteristics of the material at various depths below the surface.

Striving for Discussion: An Analysis of a Teacher Educator's Comments in Whole-Class Conversation

ERIC Educational Resources Information Center

Reynolds, Todd

2016-01-01

During my English Language Arts methods class, I noticed that my discussion patterns were teacher-focused and in an Initiation-Response-Evaluation format. Because I wanted to model dialogic methods of whole-class discussions for my preservice teachers, I recoiled from this finding and began a self-study using an action research method to examine…

Evaluation of the Human IgG Antibody Response to Aedes albopictus Saliva as a New Specific Biomarker of Exposure to Vector Bites

PubMed Central

Doucoure, Souleymane; Mouchet, François; Cornelie, Sylvie; DeHecq, Jean Sébastien; Rutee, Abdul Hamid; Roca, Yelin; Walter, Annie; Hervé, Jean Pierre; Misse, Dorothée; Favier, François; Gasque, Philippe; Remoue, Franck

2012-01-01

Background The spread of Aedes albopictus, a vector for re-emergent arbovirus diseases like chikungunya and dengue, points up the need for better control strategies and new tools to evaluate transmission risk. Human antibody (Ab) responses to mosquito salivary proteins could represent a reliable biomarker for evaluating human-vector contact and the efficacy of control programs. Methodology/Principal Findings We used ELISA tests to evaluate specific immunoglobulin G (IgG) responses to salivary gland extracts (SGE) in adults exposed to Aedes albopictus in Reunion Island. The percentage of immune responders (88%) and levels of anti-SGE IgG Abs were high in exposed individuals. At an individual level, our results indicate heterogeneity of the exposure to Aedes albopictus bites. In addition, low-level immune cross-reactivity between Aedes albopictus and Aedes aegypti SGEs was observed, mainly in the highest responders. Conclusion/Significance Ab responses to saliva could be used as an immuno-epidemiological tool for evaluating exposure to Aedes albopictus bites. Combined with entomological and epidemiological methods, a “salivary” biomarker of exposure to Aedes albopictus could enhance surveillance of its spread and the risk of arbovirus transmission, and could be used as a direct tool for the evaluation of Aedes albopictus control strategies. PMID:22363823

Social Support Versus Social Evaluation: Unique Effects on Vascular and Myocardial Response Patterns

PubMed Central

Christian, Lisa M.; Stoney, Catherine M.

2010-01-01

Objectives This study examined the effects of companion presence and evaluation on cardiovascular reactivity to an acute stressor. Methods Eighty-two women completed a speech task in one of four conditions: with an evaluative companion present, with a nonevaluative companion present, alone while being evaluated by a companion with a video camera, or alone while the companion waited outside. Results A significant interaction between companion condition and evaluative condition on systolic blood pressure was found; women who were evaluated while alone demonstrated significantly greater reactivity than did women who were in the nonevaluative alone condition. Furthermore, both potential for evaluation and the presence of a companion had important influences on hemodynamic parameters underlying the blood pressure response. Specifically, those in evaluative conditions showed greater myocardial responding than those in nonevaluative conditions and those in alone conditions showed greater vascular responding than did those with companions present. Taken together, those in the evaluative alone condition demonstrated systolic blood pressure responses reflecting both myocardial and vascular contributions. Conclusions Social support and social evaluation have unique effects on vascular and myocardial responding. The implications for future research include focus on the stress-buffering model of social support and the value of including impedance cardiography measures in investigations of cardiovascular functioning. PMID:17079702

Irradiation-hyperthermia in canine hemangiopericytomas: large-animal model for therapeutic response.

PubMed

Richardson, R C; Anderson, V L; Voorhees, W D; Blevins, W E; Inskeep, T K; Janas, W; Shupe, R E; Babbs, C F

1984-11-01

Results of irradiation-hyperthermia treatment in 11 dogs with naturally occurring hemangiopericytoma were reported. Similarities of canine and human hemangiopericytomas were described. Orthovoltage X-irradiation followed by microwave-induced hyperthermia resulted in a 91% objective response rate. A statistical procedure was given to evaluate quantitatively the clinical behavior of locally invasive, nonmetastatic tumors in dogs that were undergoing therapy for control of local disease. The procedure used a small sample size and demonstrated distribution of the data on a scaled response as well as transformation of the data through classical parametric and nonparametric statistical methods. These statistical methods set confidence limits on the population mean and placed tolerance limits on a population percentage. Application of the statistical methods to human and animal clinical trials was apparent.

The Practice of Evaluation in Public Sector Contexts: A Response

ERIC Educational Resources Information Center

Chouinard, Jill Anne

2013-01-01

In the original paper, it was argued that while there is an array of methods and methodologies available, their use is delimited by the culture of accountability that prevails in public sector institutions, a fact that is particularly problematic given the complexity and diversity of evaluation contexts today. This short rejoinder, to responses…

Projected outcomes of a public-industry partnership for enhancing corn nitrogen research and datasets

USDA-ARS?s Scientific Manuscript database

Research is needed over a wide geographic range of soil and weather scenarios to evaluate methods and tools for corn N fertilizer applications. The objectives of this research were to conduct standardized corn N rate response field studies to evaluate the performance of multiple public-domain N deci...

Education and Child Welfare Supervisor Performance: Does a Social Work Degree Matter?

ERIC Educational Resources Information Center

Perry, Robin E.

2006-01-01

Objective: To empirically examine whether the educational background of child welfare supervisors in Florida affects performance evaluations of their work. Method: A complete population sample (yielding a 58.5% response rate) of administrator and peer evaluations of child welfare workers' supervisors. ANOVA procedures were utilized to test if…

Improving Survey Methods with Cognitive Interviews in Small- and Medium-Scale Evaluations

ERIC Educational Resources Information Center

Ryan, Katherine; Gannon-Slater, Nora; Culbertson, Michael J.

2012-01-01

Findings derived from self-reported, structured survey questionnaires are commonly used in evaluation and applied research to inform policy-making and program decisions. Although there are a variety of issues related to the quality of survey evidence (e.g., sampling precision), the validity of response processes--how respondents process thoughts…

Evaluating an Objective Structured Clinical Examination (OSCE) Adapted for Social Work

ERIC Educational Resources Information Center

Bogo, Marion; Regehr, Cheryl; Katz, Ellen; Logie, Carmen; Tufford, Lea; Litvack, Andrea

2012-01-01

Objectives: To evaluate an objective structured clinical examination (OSCE) adapted for social work in a lab course and examine the degree to which it predicts competence in the practicum. Method: 125 Masters students participated in a one-scenario OSCE and wrote responses to standardized reflection questions. OSCE performance and reflections were…

An experimental and analytical investigation on the response of GR/EP composite I-frames

NASA Technical Reports Server (NTRS)

Moas, E., Jr.; Boitnott, R. L.; Griffin, O. H., Jr.

1991-01-01

Six-foot diameter, semicircular graphite/epoxy specimens representative of generic aircraft frames were loaded quasi-statically to determine their load response and failure mechanisms for large deflections that occur in an airplane crash. These frame-skin specimens consisted of a cylindrical skin section cocured with a semicircular I-frame. Various frame laminate stacking sequences and geometries were evaluated by statically loading the specimen until multiple failures occurred. Two analytical methods were compared for modeling the frame-skin specimens: a two-dimensional branched-shell finite element analysis and a one-dimensional, closed-form, curved beam solution derived using an energy method. Excellent correlation was obtained between experimental results and the finite element predictions of the linear response of the frames prior to the initial failure. The beam solution was used for rapid parameter and design studies, and was found to be stiff in comparison with the finite element analysis. The specimens were found to be useful for evaluating composite frame designs.

Quantitative electrophysiological monitoring of anti-histamine drug effects on live cells via reusable sensor platforms.

PubMed

Pham Ba, Viet Anh; Cho, Dong-Guk; Kim, Daesan; Yoo, Haneul; Ta, Van-Thao; Hong, Seunghun

2017-08-15

We demonstrated the quantitative electrophysiological monitoring of histamine and anti-histamine drug effects on live cells via reusable sensor platforms based on carbon nanotube transistors. This method enabled us to monitor the real-time electrophysiological responses of a single HeLa cell to histamine with different concentrations. The measured electrophysiological responses were attributed to the activity of histamine type 1 receptors on a HeLa cell membrane by histamine. Furthermore, the effects of anti-histamine drugs such as cetirizine or chlorphenamine on the electrophysiological activities of HeLa cells were also evaluated quantitatively. Significantly, we utilized only a single device to monitor the responses of multiple HeLa cells to each drug, which allowed us to quantitatively analyze the antihistamine drug effects on live cells without errors from the device-to-device variation in device characteristics. Such quantitative evaluation capability of our method would promise versatile applications such as drug screening and nanoscale bio sensor researches. Copyright © 2017 Elsevier B.V. All rights reserved.

Single-case synthesis tools II: Comparing quantitative outcome measures.

PubMed

Zimmerman, Kathleen N; Pustejovsky, James E; Ledford, Jennifer R; Barton, Erin E; Severini, Katherine E; Lloyd, Blair P

2018-03-07

Varying methods for evaluating the outcomes of single case research designs (SCD) are currently used in reviews and meta-analyses of interventions. Quantitative effect size measures are often presented alongside visual analysis conclusions. Six measures across two classes-overlap measures (percentage non-overlapping data, improvement rate difference, and Tau) and parametric within-case effect sizes (standardized mean difference and log response ratio [increasing and decreasing])-were compared to determine if choice of synthesis method within and across classes impacts conclusions regarding effectiveness. The effectiveness of sensory-based interventions (SBI), a commonly used class of treatments for young children, was evaluated. Separately from evaluations of rigor and quality, authors evaluated behavior change between baseline and SBI conditions. SBI were unlikely to result in positive behavior change across all measures except IRD. However, subgroup analyses resulted in variable conclusions, indicating that the choice of measures for SCD meta-analyses can impact conclusions. Suggestions for using the log response ratio in SCD meta-analyses and considerations for understanding variability in SCD meta-analysis conclusions are discussed. Copyright © 2018 Elsevier Ltd. All rights reserved.

Faculty Development for Metro New York City Postdoctoral Dental Program Directors: Delphi Assessment and Program Response.

PubMed

Rubin, Marcie S; Millery, Mari; Edelstein, Burton L

2017-03-01

Faculty development for dental academicians is essential to cultivate a continuous faculty workforce, retain existing faculty members, enhance their teaching skill sets, and remain responsive to changing program requirements and curricular reforms. To maximize the utility of dental faculty development, it is important to systematically assess and address faculty members' perceived training needs. The aims of this study were to determine priority topics among one group of postdoctoral program directors and to translate those topics into faculty development programs as part of Columbia University's Health Resources and Services Administration (HRSA)-sponsored faculty training program for primary care educators. The study was conducted in 2013-16. A Delphi consensus technique was implemented with three sequential surveys of 26 New York City metropolitan area general, pediatric, and public health dentistry residency program directors. On the first survey, the five respondents (19% response rate) identified 31 topics. On the second survey, 17 respondents (response rate 65%) rated the 15 most important topics. In the third and final round, 19 respondents (73% response rate) ranked teaching research methods and teaching literature reviews as the topics of greatest interest. Overall, the responses highlighted needs for faculty development on teaching research methods, motivating trainees, trainee evaluation, and clinical care assessment. Based on these results, a series of six Faculty Forums was developed and implemented for dental educators in the metropolitan area, starting with the topic of teaching research methods. The process flow used for assessing training needs and developing and evaluating training can be applied to a variety of populations of educators.

The Effects of an Integrated Reading Comprehension Strategy: A Culturally Responsive Teaching Approach for Fifth-Grade Students' Reading Comprehension

ERIC Educational Resources Information Center

Bui, Yvonne N.; Fagan, Yvette M.

2013-01-01

The study evaluated the effects of the Integrated Reading Comprehension Strategy on two levels. The Integrated Reading Comprehension Strategy integrated story grammar instruction and story maps, prior knowledge and prediction method, and word webs through a culturally responsive teaching framework; the Integrated Reading Comprehension Strategy…

Empirical Evaluation of Meta-Analytic Approaches for Nutrient and Health Outcome Dose-Response Data

ERIC Educational Resources Information Center

Yu, Winifred W.; Schmid, Christopher H.; Lichtenstein, Alice H.; Lau, Joseph; Trikalinos, Thomas A.

2013-01-01

The objective of this study is to empirically compare alternative meta-analytic methods for combining dose-response data from epidemiological studies. We identified meta-analyses of epidemiological studies that analyzed the association between a single nutrient and a dichotomous outcome. For each topic, we performed meta-analyses of odds ratios…

Comparison of Humoral and Cellular Immune Responses to Inactivated Swine Influenza Virus Vaccine in Weaned Pigs

USDA-ARS?s Scientific Manuscript database

Purpose: To evaluate and compare humoral and cellular immune responses to inactivated swine influenza virus (SIV) vaccine. Methods: Fifty 3-week-old weaned pigs from a herd free of SIV and PRRSV were randomly divided into the non-vaccinated control group and vaccinated group containing 25 pigs each....

A Randomized Trial of Longitudinal Effects of Low-Intensity Responsivity Education/Prelinguistic Milieu Teaching

ERIC Educational Resources Information Center

Warren, Steven F.; Fey, Marc E.; Finestack, Lizbeth, H.; Brady, Nancy C.; Bredin-Oja, Shelley L.; Fleming, Kandace K.

2008-01-01

Purpose: To evaluate the longitudinal effects of a 6-month course of responsivity education (RE)/prelinguistic milieu teaching (PMT) for young children with developmental delay. Method: Fifty-one children, age 24-33 months, with fewer than 10 expressive words were randomly assigned to early-treatment/no-treatment groups. All treatment was added as…

Leveling the Field Is Not Enough: Promoting Culturally Responsive Pedagogy in Teach for America through the Evaluation of Intercultural Competence, Colorblindness, White Racial Identity Attitudes, and the Belief That Culture Matters in Education

ERIC Educational Resources Information Center

Kim, Amber K.

2012-01-01

This research study examined constructs and beliefs essential to culturally responsive teachers for the purpose of understanding corps members' needs and promoting culturally responsive pedagogy (CRP) in the Colorado region of Teach for America (TFA). This study employed a transformative, sequential mixed methods design with a theoretical lens of…

CRMS vegetation analytical team framework: Methods for collection, development, and use of vegetation response variables

USGS Publications Warehouse

Cretini, Kari F.; Visser, Jenneke M.; Krauss, Ken W.; Steyer, Gregory D.

2011-01-01

This document identifies the main objectives of the Coastwide Reference Monitoring System (CRMS) vegetation analytical team, which are to provide (1) collection and development methods for vegetation response variables and (2) the ways in which these response variables will be used to evaluate restoration project effectiveness. The vegetation parameters (that is, response variables) collected in CRMS and other coastal restoration projects funded under the Coastal Wetlands Planning, Protection and Restoration Act (CWPPRA) are identified, and the field collection methods for these parameters are summarized. Existing knowledge on community and plant responses to changes in environmental drivers (for example, flooding and salinity) from published literature and from the CRMS and CWPPRA monitoring dataset are used to develop a suite of indices to assess wetland condition in coastal Louisiana. Two indices, the floristic quality index (FQI) and a productivity index, are described for herbaceous and forested vegetation. The FQI for herbaceous vegetation is tested with a long-term dataset from a CWPPRA marsh creation project. Example graphics for this index are provided and discussed. The other indices, an FQI for forest vegetation (that is, trees and shrubs) and productivity indices for herbaceous and forest vegetation, are proposed but not tested. New response variables may be added or current response variables removed as data become available and as our understanding of restoration success indicators develops. Once indices are fully developed, each will be used by the vegetation analytical team to assess and evaluate CRMS/CWPPRA project and program effectiveness. The vegetation analytical teams plan to summarize their results in the form of written reports and/or graphics and present these items to CRMS Federal and State sponsors, restoration project managers, landowners, and other data users for their input.

Reduction in growth threshold for pulmonary metastases: an opportunity for volumetry and its impact on treatment decisions

PubMed Central

Vogel, M N; Schmücker, S; Maksimovic, O; Hartmann, J; Claussen, C D; Horger, M

2012-01-01

Objectives This study compares tumour response assessment by automated CT volumetry and standard manual measurements regarding the impact on treatment decisions and patient outcome. Methods 58 consecutive patients with 203 pulmonary metastases undergoing baseline and follow-up multirow detector CT (MDCT) under chemotherapy were assessed for response to chemotherapy. Tumour burden of pulmonary target lesions was quantified in three ways: (1) following response evaluation criteria in solid tumours (RECIST); (2) following the volume equivalents of RECIST (i.e. with a threshold of −65/+73%); and (3) using calculated limits for stable disease (SD). For volumetry, calculated limits had been set at ±38% prior to the study by repeated quantification of nodules scanned twice. Results were compared using non-weighted κ-values and were evaluated for their impact on treatment decisions and patient outcome. Results In 15 (17%) of the 58 patients, the results of response assessment were inconsistent with 1 of the 3 methods, which would have had an impact on treatment decisions in 8 (13%). Patient outcome regarding therapy response could be verified in 5 (33%) of the 15 patients with inconsistent measurement results and was consistent with both RECIST and volumetry in 1, with calculated limits in 3 and with none in 1. Diagnosis as to the overall response was consistent with RECIST in six patients, with volumetry in six and with calculated limits in eight cases. There is an impact of different methods for therapy response assessment on treatment decisions. Conclusion A reduction of threshold for SD to ±30–40% of volume change seems reasonable when using volumetry. PMID:22745205

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The report is an overview of electric energy efficiency programs. It takes a concise look at what states are doing to encourage energy efficiency and how it impacts electric utilities. Energy efficiency programs began to be offered by utilities as a response to the energy crises of the 1970s. These regulatory-driven programs peaked in the early-1990s and then tapered off as deregulation took hold. Today, rising electricity prices, environmental concerns, and national security issues have renewed interest in increasing energy efficiency as an alternative to additional supply. In response, new methods for administering, managing, and delivering energy efficiency programs aremore » being implemented. Topics covered in the report include: Analysis of the benefits of energy efficiency and key methods for achieving energy efficiency; evaluation of the business drivers spurring increased energy efficiency; Discussion of the major barriers to expanding energy efficiency programs; evaluation of the economic impacts of energy efficiency; discussion of the history of electric utility energy efficiency efforts; analysis of the impact of energy efficiency on utility profits and methods for protecting profitability; Discussion of non-utility management of energy efficiency programs; evaluation of major methods to spur energy efficiency - systems benefit charges, resource planning, and resource standards; and, analysis of the alternatives for encouraging customer participation in energy efficiency programs.« less

Statistical methods for clinical verification of dose response parameters related to esophageal stricture and AVM obliteration from radiotherapy

NASA Astrophysics Data System (ADS)

Mavroidis, Panayiotis; Lind, Bengt K.; Theodorou, Kyriaki; Laurell, Göran; Fernberg, Jan-Olof; Lefkopoulos, Dimitrios; Kappas, Constantin; Brahme, Anders

2004-08-01

The purpose of this work is to provide some statistical methods for evaluating the predictive strength of radiobiological models and the validity of dose-response parameters for tumour control and normal tissue complications. This is accomplished by associating the expected complication rates, which are calculated using different models, with the clinical follow-up records. These methods are applied to 77 patients who received radiation treatment for head and neck cancer and 85 patients who were treated for arteriovenous malformation (AVM). The three-dimensional dose distribution delivered to esophagus and AVM nidus and the clinical follow-up results were available for each patient. Dose-response parameters derived by a maximum likelihood fitting were used as a reference to evaluate their compatibility with the examined treatment methodologies. The impact of the parameter uncertainties on the dose-response curves is demonstrated. The clinical utilization of the radiobiological parameters is illustrated. The radiobiological models (relative seriality and linear Poisson) and the reference parameters are validated to prove their suitability in reproducing the treatment outcome pattern of the patient material studied (through the probability of finding a worse fit, area under the ROC curve and khgr2 test). The analysis was carried out for the upper 5 cm of the esophagus (proximal esophagus) where all the strictures are formed, and the total volume of AVM. The estimated confidence intervals of the dose-response curves appear to have a significant supporting role on their clinical implementation and use.

A dynamic vulnerability evaluation model to smart grid for the emergency response

NASA Astrophysics Data System (ADS)

Yu, Zhen; Wu, Xiaowei; Fang, Diange

2018-01-01

Smart grid shows more significant vulnerability to natural disasters and external destroy. According to the influence characteristics of important facilities suffered from typical kinds of natural disaster and external destroy, this paper built a vulnerability evaluation index system of important facilities in smart grid based on eight typical natural disasters, including three levels of static and dynamic indicators, totally forty indicators. Then a smart grid vulnerability evaluation method was proposed based on the index system, including determining the value range of each index, classifying the evaluation grade standard and giving the evaluation process and integrated index calculation rules. Using the proposed evaluation model, it can identify the most vulnerable parts of smart grid, and then help adopting targeted emergency response measures, developing emergency plans and increasing its capacity of disaster prevention and mitigation, which guarantee its safe and stable operation.

Development of methods for establishing nutrient criteria in lakes and reservoirs: A review.

PubMed

Huo, Shouliang; Ma, Chunzi; Xi, Beidou; Zhang, Yali; Wu, Fengchang; Liu, Hongliang

2018-05-01

Nutrient criteria provide a scientific foundation for the comprehensive evaluation, prevention, control and management of water eutrophication. In this review, the literature was examined to systematically evaluate the benefits, drawbacks, and applications of statistical analysis, paleolimnological reconstruction, stressor-response model, and model inference approaches for nutrient criteria determination. The developments and challenges in the determination of nutrient criteria in lakes and reservoirs are presented. Reference lakes can reflect the original states of lakes, but reference sites are often unavailable. Using the paleolimnological reconstruction method, it is often difficult to reconstruct the historical nutrient conditions of shallow lakes in which the sediments are easily disturbed. The model inference approach requires sufficient data to identify the appropriate equations and characterize a waterbody or group of waterbodies, thereby increasing the difficulty of establishing nutrient criteria. The stressor-response model is a potential development direction for nutrient criteria determination, and the mechanisms of stressor-response models should be studied further. Based on studies of the relationships among water ecological criteria, eutrophication, nutrient criteria and plankton, methods for determining nutrient criteria should be closely integrated with water management requirements. Copyright © 2017. Published by Elsevier B.V.

Evaluation of a Novel Disaster Nursing Education Method.

PubMed

Levoy, Kristin; DeBastiani, Summer D; McCabe, Brian E

2018-02-21

A common method of disaster training is needed to improve disaster nursing education and facilitate better communication among interprofessional disaster responders. To inform the development of disaster nursing curricula, a novel disaster nursing education method consistent with Homeland Security Exercise and Evaluation Program (HSEEP) and the International Council of Nurses (ICN) framework was developed to improve disaster nursing competencies in a baccalaureate nursing program. In total, 89 undergraduate nursing students participated. Perceived disaster nursing knowledge, confidence, and training/response were assessed with 14 items before and after the education. Exploratory factor analysis showed 3 factors, knowledge, confidence, and training/response, explained 71% of variation in items. Nursing students showed large improvements in perceived disaster nursing knowledge (t=11.95, P<0.001, Cohen's d=1.76), moderate increases in perceived confidence (t=4.54, P<0.001, d=0.67), and no change in disaster training and response (t=0.94, P=0.351, d=0.13). Results show preliminary evidence supporting the effectiveness of disaster nursing education informed by HSEEP. This training has the potential to fill current practice gaps in disaster nursing knowledge and build confidence to use those skills in practice. (Disaster Med Public Health Preparedness. 2018;page 1 of 8).

Evaluating Sleep Disturbance: A Review of Methods

NASA Technical Reports Server (NTRS)

Smith, Roy M.; Oyung, R.; Gregory, K.; Miller, D.; Rosekind, M.; Rosekind, Mark R. (Technical Monitor)

1996-01-01

There are three general approaches to evaluating sleep disturbance in regards to noise: subjective, behavioral, and physiological. Subjective methods range from standardized questionnaires and scales to self-report measures designed for specific research questions. There are two behavioral methods that provide useful sleep disturbance data. One behavioral method is actigraphy, a motion detector that provides an empirical estimate of sleep quantity and quality. An actigraph, worn on the non-dominant wrist, provides a 24-hr estimate of the rest/activity cycle. The other method involves a behavioral response, either to a specific probe or stimuli or subject initiated (e.g., indicating wakefulness). The classic, gold standard for evaluating sleep disturbance is continuous physiological monitoring of brain, eye, and muscle activity. This allows detailed distinctions of the states and stages of sleep, awakenings, and sleep continuity. Physiological delta can be obtained in controlled laboratory settings and in natural environments. Current ambulatory physiological recording equipment allows evaluation in home and work settings. These approaches will be described and the relative strengths and limitations of each method will be discussed.

A Novel Ex Vivo Method for Visualizing Live-Cell Calcium Response Behavior in Intact Human Tumors.

PubMed

Koh, James; Hogue, Joyce A; Sosa, Julie A

2016-01-01

The functional impact of intratumoral heterogeneity has been difficult to assess in the absence of a means to interrogate dynamic, live-cell biochemical events in the native tissue context of a human tumor. Conventional histological methods can reveal morphology and static biomarker expression patterns but do not provide a means to probe and evaluate tumor functional behavior and live-cell responsiveness to experimentally controlled stimuli. Here, we describe an approach that couples vibratome-mediated viable tissue sectioning with live-cell confocal microscopy imaging to visualize human parathyroid adenoma tumor cell responsiveness to extracellular calcium challenge. Tumor sections prepared as 300 micron-thick tissue slices retain viability throughout a >24 hour observation period and retain the native architecture of the parental tumor. Live-cell observation of biochemical signaling in response to extracellular calcium challenge in the intact tissue slices reveals discrete, heterogeneous kinetic waveform categories of calcium agonist reactivity within each tumor. Plotting the proportion of maximally responsive tumor cells as a function of calcium concentration yields a sigmoid dose-response curve with a calculated calcium EC50 value significantly elevated above published reference values for wild-type calcium-sensing receptor (CASR) sensitivity. Subsequent fixation and immunofluorescence analysis of the functionally evaluated tissue specimens allows alignment and mapping of the physical characteristics of individual cells within the tumor to specific calcium response behaviors. Evaluation of the relative abundance of intracellular PTH in tissue slices challenged with variable calcium concentrations demonstrates that production of the hormone can be dynamically manipulated ex vivo. The capability of visualizing live human tumor tissue behavior in response to experimentally controlled conditions opens a wide range of possibilities for personalized ex vivo therapeutic testing. This highly adaptable system provides a unique platform for live-cell ex vivo provocative testing of human tumor responsiveness to a range of physiological agonists or candidate therapeutic compounds.

Dental students' evaluations of an interactive histology software.

PubMed

Rosas, Cristian; Rubí, Rafael; Donoso, Manuel; Uribe, Sergio

2012-11-01

This study assessed dental students' evaluations of a new Interactive Histology Software (IHS) developed by the authors and compared students' assessment of the extent to which this new software, as well as other histology teaching methods, supported their learning. The IHS is a computer-based tool for histology learning that presents high-resolution images of histology basics as well as specific oral histologies at different magnifications and with text labels. Survey data were collected from 204 first-year dental students at the Universidad Austral de Chile. The survey consisted of questions for the respondents to evaluate the characteristics of the IHS and the contribution of various teaching methods to their histology learning. The response rate was 85 percent. Student evaluations were positive for the design, usability, and theoretical-practical integration of the IHS, and the students reported they would recommend the method to future students. The students continued to value traditional teaching methods for histological lab work and did not think this new technology would replace traditional methods. With respect to the contribution of each teaching method to students' learning, no statistically significant differences (p>0.05) were found for an evaluation of IHS, light microscopy, and slide presentations. However, these student assessments were significantly more positive than the evaluations of other digital or printed materials. Overall, the students evaluated the IHS very positively in terms of method quality and contribution to their learning; they also evaluated use of light microscopy and teacher slide presentations positively.

Measurement properties of existing clinical assessment methods evaluating scapular positioning and function. A systematic review.

PubMed

Larsen, Camilla Marie; Juul-Kristensen, Birgit; Lund, Hans; Søgaard, Karen

2014-10-01

The aims were to compile a schematic overview of clinical scapular assessment methods and critically appraise the methodological quality of the involved studies. A systematic, computer-assisted literature search using Medline, CINAHL, SportDiscus and EMBASE was performed from inception to October 2013. Reference lists in articles were also screened for publications. From 50 articles, 54 method names were identified and categorized into three groups: (1) Static positioning assessment (n = 19); (2) Semi-dynamic (n = 13); and (3) Dynamic functional assessment (n = 22). Fifteen studies were excluded for evaluation due to no/few clinimetric results, leaving 35 studies for evaluation. Graded according to the COnsensus-based Standards for the selection of health Measurement INstruments (COSMIN checklist), the methodological quality in the reliability and validity domains was "fair" (57%) to "poor" (43%), with only one study rated as "good". The reliability domain was most often investigated. Few of the assessment methods in the included studies that had "fair" or "good" measurement property ratings demonstrated acceptable results for both reliability and validity. We found a substantially larger number of clinical scapular assessment methods than previously reported. Using the COSMIN checklist the methodological quality of the included measurement properties in the reliability and validity domains were in general "fair" to "poor". None were examined for all three domains: (1) reliability; (2) validity; and (3) responsiveness. Observational evaluation systems and assessment of scapular upward rotation seem suitably evidence-based for clinical use. Future studies should test and improve the clinimetric properties, and especially diagnostic accuracy and responsiveness, to increase utility for clinical practice.

Applicability of the two-angle differential method to response measurement of neutron-sensitive devices at the RCNP high-energy neutron facility

NASA Astrophysics Data System (ADS)

Masuda, Akihiko; Matsumoto, Tetsuro; Iwamoto, Yosuke; Hagiwara, Masayuki; Satoh, Daiki; Sato, Tatsuhiko; Iwase, Hiroshi; Yashima, Hiroshi; Nakane, Yoshihiro; Nishiyama, Jun; Shima, Tatsushi; Tamii, Atsushi; Hatanaka, Kichiji; Harano, Hideki; Nakamura, Takashi

2017-03-01

Quasi-monoenergetic high-energy neutron fields induced by 7Li(p,n) reactions are used for the response evaluation of neutron-sensitive devices. The quasi-monoenergetic high-energy field consists of high-energy monoenergetic peak neutrons and unwanted continuum neutrons down to the low-energy region. A two-angle differential method has been developed to compensate for the effect of the continuum neutrons in the response measurements. In this study, the two-angle differential method was demonstrated for Bonner sphere detectors, which are typical examples of moderator-based neutron-sensitive detectors, to investigate the method's applicability and its dependence on detector characteristics. Experiments were performed under 96-387 MeV quasi-monoenergetic high-energy neutron fields at the Research Center for Nuclear Physics (RCNP), Osaka University. The measurement results for large high-density polyethylene (HDPE) sphere detectors agreed well with Monte Carlo calculations, which verified the adequacy of the two-angle differential method. By contrast, discrepancies were observed in the results for small HDPE sphere detectors and metal-induced sphere detectors. The former indicated that detectors that are particularly sensitive to low-energy neutrons may be affected by penetrating neutrons owing to the geometrical features of the RCNP facility. The latter discrepancy could be consistently explained by a problem in the evaluated cross-section data for the metals used in the calculation. Through those discussions, the adequacy of the two-angle differential method was experimentally verified, and practical suggestions were made pertaining to this method.

Learning while evaluating: the use of an electronic evaluation portfolio in a geriatric medicine clerkship

PubMed Central

Duque, Gustavo; Finkelstein, Adam; Roberts, Ayanna; Tabatabai, Diana; Gold, Susan L; Winer, Laura R

2006-01-01

Background Electronic evaluation portfolios may play a role in learning and evaluation in clinical settings and may complement other traditional evaluation methods (bedside evaluations, written exams and tutor-led evaluations). Methods 133 third-year medical students used the McGill Electronic Evaluation Portfolio (MEEP) during their one-month clerkship rotation in Geriatric Medicine between September 2002 and September 2003. Students were divided into two groups, one who received an introductory hands-on session about the electronic evaluation portfolio and one who did not. Students' marks in their portfolios were compared between both groups. Additionally, students self-evaluated their performance and received feedback using the electronic portfolio during their mandatory clerkship rotation. Students were surveyed immediately after the rotation and at the end of the clerkship year. Tutors' opinions about this method were surveyed once. Finally, the number of evaluations/month was quantified. In all surveys, Likert scales were used and were analyzed using Chi-square tests and t-tests to assess significant differences in the responses from surveyed subjects. Results The introductory session had a significant effect on students' portfolio marks as well as on their comfort using the system. Both tutors and students reported positive notions about the method. Remarkably, an average (± SD) of 520 (± 70) evaluations/month was recorded with 30 (± 5) evaluations per student/month. Conclusion The MEEP showed a significant and positive effect on both students' self-evaluations and tutors' evaluations involving an important amount of self-reflection and feedback which may complement the more traditional evaluation methods. PMID:16409640

Evaluation of adding item-response theory analysis for evaluation of the European Board of Ophthalmology Diploma examination.

PubMed

Mathysen, Danny G P; Aclimandos, Wagih; Roelant, Ella; Wouters, Kristien; Creuzot-Garcher, Catherine; Ringens, Peter J; Hawlina, Marko; Tassignon, Marie-José

2013-11-01

To investigate whether introduction of item-response theory (IRT) analysis, in parallel to the 'traditional' statistical analysis methods available for performance evaluation of multiple T/F items as used in the European Board of Ophthalmology Diploma (EBOD) examination, has proved beneficial, and secondly, to study whether the overall assessment performance of the current written part of EBOD is sufficiently high (KR-20≥ 0.90) to be kept as examination format in future EBOD editions. 'Traditional' analysis methods for individual MCQ item performance comprise P-statistics, Rit-statistics and item discrimination, while overall reliability is evaluated through KR-20 for multiple T/F items. The additional set of statistical analysis methods for the evaluation of EBOD comprises mainly IRT analysis. These analysis techniques are used to monitor whether the introduction of negative marking for incorrect answers (since EBOD 2010) has a positive influence on the statistical performance of EBOD as a whole and its individual test items in particular. Item-response theory analysis demonstrated that item performance parameters should not be evaluated individually, but should be related to one another. Before the introduction of negative marking, the overall EBOD reliability (KR-20) was good though with room for improvement (EBOD 2008: 0.81; EBOD 2009: 0.78). After the introduction of negative marking, the overall reliability of EBOD improved significantly (EBOD 2010: 0.92; EBOD 2011:0.91; EBOD 2012: 0.91). Although many statistical performance parameters are available to evaluate individual items, our study demonstrates that the overall reliability assessment remains the only crucial parameter to be evaluated allowing comparison. While individual item performance analysis is worthwhile to undertake as secondary analysis, drawing final conclusions seems to be more difficult. Performance parameters need to be related, as shown by IRT analysis. Therefore, IRT analysis has proved beneficial for the statistical analysis of EBOD. Introduction of negative marking has led to a significant increase in the reliability (KR-20 > 0.90), indicating that the current examination format can be kept for future EBOD examinations. © 2013 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Automation for deep space vehicle monitoring

NASA Technical Reports Server (NTRS)

Schwuttke, Ursula M.

1991-01-01

Information on automation for deep space vehicle monitoring is given in viewgraph form. Information is given on automation goals and strategy; the Monitor Analyzer of Real-time Voyager Engineering Link (MARVEL); intelligent input data management; decision theory for making tradeoffs; dynamic tradeoff evaluation; evaluation of anomaly detection results; evaluation of data management methods; system level analysis with cooperating expert systems; the distributed architecture of multiple expert systems; and event driven response.

Lung cell fiber evanescent wave spectroscopic biosensing of inhalation health hazards.

PubMed

Riley, Mark R; Lucas, Pierre; Le Coq, David; Juncker, Christophe; Boesewetter, Dianne E; Collier, Jayne L; DeRosa, Diana M; Katterman, Matthew E; Boussard-Plédel, Catherine; Bureau, Bruno

2006-11-05

Health risks associated with the inhalation of biological materials have been a topic of great concern; however, there are no rapid and automatable methods available to evaluate the potential health impact of inhaled materials. Here we describe a novel approach to evaluate the potential toxic effects of materials evaluated through cell-based spectroscopic analysis. Anchorage-dependent cells are grown on the surface of optical fibers transparent to infrared light. The probe system is composed of a single chalcogenide fiber (composed of Te, As, and Se) acting as both the sensor and transmission line for infrared optical signals. The cells are exposed to potential toxins and alterations of cellular composition are monitored through their impact on cellular spectral features. The signal is collected via evanescent wave absorption along the tapered sensing zone of the fiber through spectral changes between 3,000 and 600 cm(-1) (3,333-16,666 nm). Cell physiology, composition, and function are non-invasively tracked through monitoring infrared light absorption by the cell layer. This approach is demonstrated with an immortalized lung cell culture (A549, human lung carcinoma epithelia) in response to a variety of inhalation hazards including gliotoxin (a fungal metabolite), etoposide (a genotoxin), and methyl methansesulfonate (MMS, an alkylating agent). Gliotoxin impacts cell metabolism, etoposide impacts nucleic acids and the cell cycle, and MMS impacts nucleic acids and induces an immune response. This spectroscopic method is sensitive, non-invasive, and provides information on a wide range of cellular damage and response mechanisms and could prove useful for cell response screening of pharmaceuticals or for toxicological evaluations. (c) 2006 Wiley Periodicals, Inc.

Knowledge Management Framework for Emerging Infectious Diseases Preparedness and Response: Design and Development of Public Health Document Ontology

PubMed Central

Zhang, Zhizun; Gonzalez, Mila C; Morse, Stephen S

2017-01-01

Background There are increasing concerns about our preparedness and timely coordinated response across the globe to cope with emerging infectious diseases (EIDs). This poses practical challenges that require exploiting novel knowledge management approaches effectively. Objective This work aims to develop an ontology-driven knowledge management framework that addresses the existing challenges in sharing and reusing public health knowledge. Methods We propose a systems engineering-inspired ontology-driven knowledge management approach. It decomposes public health knowledge into concepts and relations and organizes the elements of knowledge based on the teleological functions. Both knowledge and semantic rules are stored in an ontology and retrieved to answer queries regarding EID preparedness and response. Results A hybrid concept extraction was implemented in this work. The quality of the ontology was evaluated using the formal evaluation method Ontology Quality Evaluation Framework. Conclusions Our approach is a potentially effective methodology for managing public health knowledge. Accuracy and comprehensiveness of the ontology can be improved as more knowledge is stored. In the future, a survey will be conducted to collect queries from public health practitioners. The reasoning capacity of the ontology will be evaluated using the queries and hypothetical outbreaks. We suggest the importance of developing a knowledge sharing standard like the Gene Ontology for the public health domain. PMID:29021130

Leptomeningeal metastases: a RANO proposal for response criteria

PubMed Central

Junck, Larry; Brandsma, Dieta; Soffietti, Riccardo; Rudà, Roberta; Raizer, Jeffrey; Boogerd, Willem; Taillibert, Sophie; Groves, Morris D.; Rhun, Emilie Le; Walker, Julie; van den Bent, Martin; Wen, Patrick Y.; Jaeckle, Kurt A.

2017-01-01

Abstract Leptomeningeal metastases (LM) currently lack standardization with respect to response assessment. A Response Assessment in Neuro-Oncology (RANO) working group with expertise in LM developed a consensus proposal for evaluating patients treated for this disease. Three basic elements in assessing response in LM are proposed: a standardized neurological examination, cerebral spinal fluid (CSF) cytology or flow cytometry, and radiographic evaluation. The group recommends that all patients enrolling in clinical trials undergo CSF analysis (cytology in all cancers; flow cytometry in hematologic cancers), complete contrast-enhanced neuraxis MRI, and in instances of planned intra-CSF therapy, radioisotope CSF flow studies. In conjunction with the RANO Neurological Assessment working group, a standardized instrument was created for assessing the neurological exam in patients with LM. Considering that most lesions in LM are nonmeasurable and that assessment of neuroimaging in LM is subjective, neuroimaging is graded as stable, progressive, or improved using a novel radiological LM response scorecard. Radiographic disease progression in isolation (ie, negative CSF cytology/flow cytometry and stable neurological assessment) would be defined as LM disease progression. The RANO LM working group has proposed a method of response evaluation for patients with LM that will require further testing, validation, and likely refinement with use. PMID:28039364

A comparative experimental evaluation of uncertainty estimation methods for two-component PIV

NASA Astrophysics Data System (ADS)

Boomsma, Aaron; Bhattacharya, Sayantan; Troolin, Dan; Pothos, Stamatios; Vlachos, Pavlos

2016-09-01

Uncertainty quantification in planar particle image velocimetry (PIV) measurement is critical for proper assessment of the quality and significance of reported results. New uncertainty estimation methods have been recently introduced generating interest about their applicability and utility. The present study compares and contrasts current methods, across two separate experiments and three software packages in order to provide a diversified assessment of the methods. We evaluated the performance of four uncertainty estimation methods, primary peak ratio (PPR), mutual information (MI), image matching (IM) and correlation statistics (CS). The PPR method was implemented and tested in two processing codes, using in-house open source PIV processing software (PRANA, Purdue University) and Insight4G (TSI, Inc.). The MI method was evaluated in PRANA, as was the IM method. The CS method was evaluated using DaVis (LaVision, GmbH). Utilizing two PIV systems for high and low-resolution measurements and a laser doppler velocimetry (LDV) system, data were acquired in a total of three cases: a jet flow and a cylinder in cross flow at two Reynolds numbers. LDV measurements were used to establish a point validation against which the high-resolution PIV measurements were validated. Subsequently, the high-resolution PIV measurements were used as a reference against which the low-resolution PIV data were assessed for error and uncertainty. We compared error and uncertainty distributions, spatially varying RMS error and RMS uncertainty, and standard uncertainty coverages. We observed that qualitatively, each method responded to spatially varying error (i.e. higher error regions resulted in higher uncertainty predictions in that region). However, the PPR and MI methods demonstrated reduced uncertainty dynamic range response. In contrast, the IM and CS methods showed better response, but under-predicted the uncertainty ranges. The standard coverages (68% confidence interval) ranged from approximately 65%-77% for PPR and MI methods, 40%-50% for IM and near 50% for CS. These observations illustrate some of the strengths and weaknesses of the methods considered herein and identify future directions for development and improvement.

Genetic toxicology at the crossroads-from qualitative hazard evaluation to quantitative risk assessment.

PubMed

White, Paul A; Johnson, George E

2016-05-01

Applied genetic toxicology is undergoing a transition from qualitative hazard identification to quantitative dose-response analysis and risk assessment. To facilitate this change, the Health and Environmental Sciences Institute (HESI) Genetic Toxicology Technical Committee (GTTC) sponsored a workshop held in Lancaster, UK on July 10-11, 2014. The event included invited speakers from several institutions and the contents was divided into three themes-1: Point-of-departure Metrics for Quantitative Dose-Response Analysis in Genetic Toxicology; 2: Measurement and Estimation of Exposures for Better Extrapolation to Humans and 3: The Use of Quantitative Approaches in Genetic Toxicology for human health risk assessment (HHRA). A host of pertinent issues were discussed relating to the use of in vitro and in vivo dose-response data, the development of methods for in vitro to in vivo extrapolation and approaches to use in vivo dose-response data to determine human exposure limits for regulatory evaluations and decision-making. This Special Issue, which was inspired by the workshop, contains a series of papers that collectively address topics related to the aforementioned themes. The Issue includes contributions that collectively evaluate, describe and discuss in silico, in vitro, in vivo and statistical approaches that are facilitating the shift from qualitative hazard evaluation to quantitative risk assessment. The use and application of the benchmark dose approach was a central theme in many of the workshop presentations and discussions, and the Special Issue includes several contributions that outline novel applications for the analysis and interpretation of genetic toxicity data. Although the contents of the Special Issue constitutes an important step towards the adoption of quantitative methods for regulatory assessment of genetic toxicity, formal acceptance of quantitative methods for HHRA and regulatory decision-making will require consensus regarding the relationships between genetic damage and disease, and the concomitant ability to use genetic toxicity results per se. © Her Majesty the Queen in Right of Canada 2016. Reproduced with the permission of the Minister of Health.

Tolerance of freshwater test organisms to formulated sediments for use as control materials in whole-sediment toxicity tests

USGS Publications Warehouse

Kemble, N.E.; Dwyer, F.J.; Ingersoll, C.G.; Dawson, T.D.; Norberg-King, T. J.

1999-01-01

A method is described for preparing formulated sediments for use intoxicity testing. Ingredients used to prepare formulated sediments included commercially available silt, clay, sand, humic acid, dolomite, and α-cellulose (as a source of organic carbon). α-Cellulose was selected as the source of organic carbon because it is commercially available, consistent from batch to batch, and low in contaminant concentrations. The tolerance of freshwater test organisms to formulated sediments for use as control materials in whole-sediment toxicity testing was evaluated. Sediment exposures were conducted for 10 d with the amphipod Hyalella azteca, the midges Chironomus riparius and C. tentans, and the oligochaete Lumbriculus variegatus and for 28 d with H. azteca. Responses of organisms in formulated sediments was compared with a field-collected control sediment that has routinely been used to determine test acceptability. Tolerance of organisms to formulated sediments was evaluated by determining responses to varying levels of α-cellulose, to varying levels of grain size, to evaluation of different food types, or to evaluation of different sources of overlying water. In the 10-d exposures, survival of organisms exposed to the formulated sediments routinely met or exceeded the responses of test organisms exposed to the control sediment and routinely met test acceptability criteria required in standard methods. Growth of amphipods and oligochaetes in 10-d exposures with formulated sediment was often less than growth of organisms in the field-collected control sediment. Additional research is needed, using the method employed to prepare formulated sediment, to determine if conditioning formulated sediments before starting 10-d tests would improve the growth of amphipods. In the 28-d exposures, survival of H. azteca was low when reconstituted water was used as the source of overlying water. However, when well water was used as the source of overlying water in 28-d exposures, consistent responses of amphipods were observed in both formulated and control sediments.

Translation and Validation of the Korean Version of the International Knee Documentation Committee Subjective Knee Form

PubMed Central

Kim, Jin Goo; Lee, Joong Yub; Seo, Seung Suk; Choi, Choong Hyeok; Lee, Myung Chul

2013-01-01

Purpose To perform a cross-cultural adaptation and to test the measurement properties of the Korean version of International Knee Documentation Committee (K-IKDC) Subjective Knee Form. Materials and Methods According to the guidelines for cross-cultural adaptation, translation and backward translation of the English version of the IKDC Subjective Knee Form were performed. After translation into the Korean version, 150 patients who had knee-related problems were asked to complete the K-IKDC, Lysholm score, and Short Form-36 (SF-36). Of these patients, 126 were retested 2 weeks later to evaluate test-retest reliability, and 104 were recruited 3 months later to evaluate responsiveness. Construct validity was analyzed by investigating the correlation with Lysholm score and SF-36; content validity was also evaluated. Standardized mean response was calculated for evaluating responsiveness. Results The test-retest reliability proved excellent with a high value for the intraclass correlation coefficient (r=0.94). The internal consistency was strong (Cronbach's α=0.91). Good content validity with absence of floor not ceiling effects and good convergent and divergent validity were observed. Moderate responsiveness was shown (standardized mean response=0.689). Conclusions The K-IKDC demonstrated good measurement properties. We suggest that this instrument is an excellent evaluation instrument that can be used for Korean patients with knee-related injuries. PMID:24032098

Assessing the Effectiveness of "Wise Guys": A Mixed-Methods Approach

ERIC Educational Resources Information Center

Herrman, Judith W.; Gordon, Mellissa; Rahmer, Brian; Moore, Christopher C.; Habermann, Barbara; Haigh, Katherine M.

2017-01-01

Previous research raised questions on the validity of survey studies with the teen population. As one response, our team implemented a mixed-methods study to evaluate an evidence-based, interactive curriculum, "Wise Guys," which is designed to promote healthy relationships and sexual behavior in young men ages 4-17. The current study…

COMPARISON OF IN VIVO AND IN VITRO CHEMICAL SCREENING ASSAYS FOR ESTROGEN-RESPONSIVE PROTEIN BIOMARKER EXPRESSION IN THE SHEEPSHEAD MINNOW (CYPRINODON VARIEGATUS)

EPA Science Inventory

Animal welfare concerns and the high cost associated with in vivo chemical screening methods have prompted efforts to develop highly specific and sensitive in vitro techniques to evaluate chemicals for endocrine activity. Diagnostic biomarkers developed using in vitro methods sho...

Generating Multiple Imputations for Matrix Sampling Data Analyzed with Item Response Models.

ERIC Educational Resources Information Center

Thomas, Neal; Gan, Nianci

1997-01-01

Describes and assesses missing data methods currently used to analyze data from matrix sampling designs implemented by the National Assessment of Educational Progress. Several improved methods are developed, and these models are evaluated using an EM algorithm to obtain maximum likelihood estimates followed by multiple imputation of complete data…

Soil carbon changes: comparing flux monitoring and mass balance in a box lysimeter experiment.

Treesearch

S.M. Nay; B.T. Bormann

2000-01-01

Direct measures of soil-surface respiration are needed to evaluate belowground biological processes, forest productivity, and ecosystem responses to global change. Although infra-red gas analyzer {IRGA) methods track reference CO2 flows in lab studies, questions remain for extrapolating IRGA methods to field conditions. We constructed 10 box...

Adaptation of Different Computerized Methods of Distance Learning to an External PharmD Degree Program.

ERIC Educational Resources Information Center

Kaplan, Irene Petzinger; And Others

1996-01-01

A distance education course in drug information, scholarly literature evaluation, and biostatistics, offered as part of a doctoral pharmacy program, incorporates teleconferencing and online critiquing of pharmacy journal literature. Structure of the class, software and hardware, student performance, and student response to the teaching methods are…

Improving Sampling and Response Rates in Children's Health Research through Participatory Methods

ERIC Educational Resources Information Center

Claudio, Luz; Stingone, Jeanette A.

2008-01-01

Background: Children's health is an important indicator of community health because children are especially vulnerable to disease. The school setting is ideal for assessing these vulnerabilities and prevalence of disease, yet the methods that produce high participation among students and their families are not usually described or evaluated. This…

Partnering with the Local Livestock Market in Educational Programs.

ERIC Educational Resources Information Center

Jenkins, Jamie H.; Newman, Michael E.; Castellaw, Jimmy C.; Lane, Clyde D., Jr.

2000-01-01

Survey responses from 62 of 96 cattle producers evaluated educational methods of the extension service and the livestock market. Methods included tips distributed with the sale check, monthly and sale day programs, and Second Saturday cattle working program. The combination of programs offered influenced them to make changes in their production…

A Method to Establish Stimulus Control and Compliance with Instructions

ERIC Educational Resources Information Center

Borgen, John G.; Mace, F. Charles; Cavanaugh, Brenna M.; Shamlian, Kenneth; Lit, Keith R.; Wilson, Jillian B.; Trauschke, Stephanie L.

2017-01-01

We evaluated a unique procedure to establish compliance with instructions in four young children diagnosed with autism spectrum disorder (ASD) who had low levels of compliance. Our procedure included methods to establish a novel therapist as a source of positive reinforcement, reliably evoke orienting responses to the therapist, increase the…

A comparison of methods for evaluating structure during ship collisions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ammerman, D.J.; Daidola, J.C.

1996-10-01

A comparison is provided of the results of various methods for evaluating structure during a ship-to-ship collision. The baseline vessel utilized in the analyses is a 67.4 meter in length displacement hull struck by an identical vessel traveling at speeds ranging from 10 to 30 knots. The structural response of the struck vessel and motion of both the struck and striking vessels are assessed by finite element analysis. These same results are then compared to predictions utilizing the {open_quotes}Tanker Structural Analysis for Minor Collisions{close_quotes} (TSAMC) Method, the Minorsky Method, the Haywood Collision Process, and comparison to full-scale tests. Consideration ismore » given to the nature of structural deformation, absorbed energy, penetration, rigid body motion, and virtual mass affecting the hydrodynamic response. Insights are provided with regard to the calibration of the finite element model which was achievable through utilizing the more empirical analyses and the extent to which the finite element analysis is able to simulate the entire collision event. 7 refs., 8 figs., 4 tabs.« less

Time-dependent inertia analysis of vehicle mechanisms

NASA Astrophysics Data System (ADS)

Salmon, James Lee

Two methods for performing transient inertia analysis of vehicle hardware systems are developed in this dissertation. The analysis techniques can be used to predict the response of vehicle mechanism systems to the accelerations associated with vehicle impacts. General analytical methods for evaluating translational or rotational system dynamics are generated and evaluated for various system characteristics. The utility of the derived techniques are demonstrated by applying the generalized methods to two vehicle systems. Time dependent acceleration measured during a vehicle to vehicle impact are used as input to perform a dynamic analysis of an automobile liftgate latch and outside door handle. Generalized Lagrange equations for a non-conservative system are used to formulate a second order nonlinear differential equation defining the response of the components to the transient input. The differential equation is solved by employing the fourth order Runge-Kutta method. The events are then analyzed using commercially available two dimensional rigid body dynamic analysis software. The results of the two analytical techniques are compared to experimental data generated by high speed film analysis of tests of the two components performed on a high G acceleration sled at Ford Motor Company.

Fault tolerant testbed evaluation, phase 1

NASA Technical Reports Server (NTRS)

Caluori, V., Jr.; Newberry, T.

1993-01-01

In recent years, avionics systems development costs have become the driving factor in the development of space systems, military aircraft, and commercial aircraft. A method of reducing avionics development costs is to utilize state-of-the-art software application generator (autocode) tools and methods. The recent maturity of application generator technology has the potential to dramatically reduce development costs by eliminating software development steps that have historically introduced errors and the need for re-work. Application generator tools have been demonstrated to be an effective method for autocoding non-redundant, relatively low-rate input/output (I/O) applications on the Space Station Freedom (SSF) program; however, they have not been demonstrated for fault tolerant, high-rate I/O, flight critical environments. This contract will evaluate the use of application generators in these harsh environments. Using Boeing's quad-redundant avionics system controller as the target system, Space Shuttle Guidance, Navigation, and Control (GN&C) software will be autocoded, tested, and evaluated in the Johnson (Space Center) Avionics Engineering Laboratory (JAEL). The response of the autocoded system will be shown to match the response of the existing Shuttle General Purpose Computers (GPC's), thereby demonstrating the viability of using autocode techniques in the development of future avionics systems.

Standard Methods for Bolt-Bearing Testing of Textile Composites

NASA Technical Reports Server (NTRS)

Portanova, M. A.; Masters, J. E.

1995-01-01

The response of three 2-D braided materials to bolt bearing loading was evaluated using data generated by Boeing Defense and Space Group in Philadelphia, PA. Three test methods, stabilized single shear, unstabilized single shear, and double shear, were compared. In general, these textile composites were found to be sensitive to bolt bearing test methods. The stabilized single shear method yielded higher strengths than the unstabilized single shear method in all cases. The double shear test method always produced the highest strengths but these results may be somewhat misleading. It is therefore recommended that standard material comparisons be made using the stabilized single shear test method. The effects of two geometric parameters, W/D and e/D, were also studied. An evaluation of the effect of the specimen width (W) to hole diameter (D) ratio concluded that bolt bearing responses were consistent with open hole tension results. A W/D ratio of 6 or greater should be maintained. The proximity of the hole to the specimen edge significantly affected strength. In all cases, strength was improved by increasing the ratio of the distance from the hole center to the specimen edge (e) to the hole diameter (D) above 2. An e/D ratio of 3 or greater is recommended.

77 FR 50510 - Federal Agency Responses to Interagency Coordinating Committee on the Validation of Alternative...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-21

... methods for potential use in the EPA EDSP. The evaluation indicated that no in vitro ER- or AR-based test... considered a high priority based on the lack of adequately validated test methods and the regulatory and... Limitations of the LUMI-CELL[supreg] ER (BG1Luc ER TA) Test Method, An In Vitro Assay for Identifying Human...

An Evaluation of the Kernel Equating Method: A Special Study with Pseudotests Constructed from Real Test Data. Research Report. ETS RR-06-02

ERIC Educational Resources Information Center

von Davier, Alina A.; Holland, Paul W.; Livingston, Samuel A.; Casabianca, Jodi; Grant, Mary C.; Martin, Kathleen

2006-01-01

This study examines how closely the kernel equating (KE) method (von Davier, Holland, & Thayer, 2004a) approximates the results of other observed-score equating methods--equipercentile and linear equatings. The study used pseudotests constructed of item responses from a real test to simulate three equating designs: an equivalent groups (EG)…

Interobserver Variation in Response Evaluation Criteria in Solid Tumors 1.1.

PubMed

Karmakar, Arunabha; Kumtakar, Apeksha; Sehgal, Himanshu; Kumar, Savith; Kalyanpur, Arjun

2018-06-19

Response Evaluation Criteria in Solid Tumors (RECIST 1.1) is the gold standard for imaging response evaluation in cancer trials. We sought to evaluate consistency of applying RECIST 1.1 between 2 conventionally trained radiologists, designated as A and B; identify reasons for variation; and reconcile these differences for future studies. The study was approved as an institutional quality check exercise. Since no identifiable patient data was collected or used, a waiver of informed consent was granted. Imaging case report forms of a concluded multicentric breast cancer trial were retrospectively reviewed. Cohen's kappa was used to rate interobserver agreement in Response Evaluation Data (target response, nontarget response, new lesions, overall response). Significant variations were reassessed by a senior radiologist to extrapolate reasons for disagreement. Methods to improve agreement were similarly ascertained. Sixty one cases with total of 82 data-pairs were evaluated (35 data-pairs in visit 5, 47 in visit 9). Both radiologists showed moderate agreement in target response (n = 82; ĸ = 0.477; 95% confidence interval [CI]: 0.314-0.640-), nontarget response (n = 82; ĸ = 0.578; 95% CI: 0.213-0.944) and overall response evaluation in both visits (n = 82; ĸ = 0.510; 95% CI: 0.344-0.676). Further assessment demonstrated "Prevalence effect" of Kappa in some cases which led to underestimation of agreement. Percent agreement of overall response was 74.39% while percent variation was 25.6%. Differences in interpreting RECIST 1.1 and in radiological image interpretation were the primary sources of variation. The commonest overall response was "Partial Response" (Rad A:45/82; Rad B:63/82). Inspite of moderate interobserver agreement, qualitative interpretation differences in some cases increased interobserver variability. Protocols such as Adjudication, to reduce easily avoidable inconsistencies are or should be a part of the Standard Operating Procedure in imaging institutions. Based on our findings, a standard checklist has been developed to help reduce the interpretation error-margin for future studies. Such check-lists may improve interobserver agreement in the preadjudication phase thereby improving quality of results and reducing adjudication per case ratio. Improving data reliability when using RECIST 1.1 will reflect in better cancer clinical trial outcomes. A checklist can be of use to imaging centers to assess and improve their own processes. Copyright © 2018. Published by Elsevier Inc.

Linking normative models of natural tasks to descriptive models of neural response.

PubMed

Jaini, Priyank; Burge, Johannes

2017-10-01

Understanding how nervous systems exploit task-relevant properties of sensory stimuli to perform natural tasks is fundamental to the study of perceptual systems. However, there are few formal methods for determining which stimulus properties are most useful for a given natural task. As a consequence, it is difficult to develop principled models for how to compute task-relevant latent variables from natural signals, and it is difficult to evaluate descriptive models fit to neural response. Accuracy maximization analysis (AMA) is a recently developed Bayesian method for finding the optimal task-specific filters (receptive fields). Here, we introduce AMA-Gauss, a new faster form of AMA that incorporates the assumption that the class-conditional filter responses are Gaussian distributed. Then, we use AMA-Gauss to show that its assumptions are justified for two fundamental visual tasks: retinal speed estimation and binocular disparity estimation. Next, we show that AMA-Gauss has striking formal similarities to popular quadratic models of neural response: the energy model and the generalized quadratic model (GQM). Together, these developments deepen our understanding of why the energy model of neural response have proven useful, improve our ability to evaluate results from subunit model fits to neural data, and should help accelerate psychophysics and neuroscience research with natural stimuli.

Improved response functions for gamma-ray skyshine analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shultis, J.K.; Faw, R.E.; Deng, X.

1992-09-01

A computationally simple method, based on line-beam response functions, is refined for estimating gamma skyshine dose rates. Critical to this method is the availability of an accurate approximation for the line-beam response function (LBRF). In this study the LBRF is evaluated accurately with the point-kernel technique using recent photon interaction data. Various approximations to the LBRF are considered, and a three parameter formula is selected as the most practical approximation. By fitting the approximating formula to point-kernel results, a set of parameters is obtained that allows the LBRF to be quickly and accurately evaluated for energies between 0.01 and 15more » MeV, for source-to-detector distances from 1 to 3000 m, and for beam angles from 0 to 180 degrees. This reevaluation of the approximate LBRF gives better accuracy, especially at low energies, over a greater source-to-detector range than do previous LBRF approximations. A conical beam response function is also introduced for application to skyshine sources that are azimuthally symmetric about a vertical axis. The new response functions are then applied to three simple skyshine geometries (an open silo geometry, an infinite wall, and a rectangular four-wall building) and the results compared to previous calculations and benchmark data.« less

Comparison of Resource Requirements for a Wind Tunnel Test Designed with Conventional vs. Modern Design of Experiments Methods

NASA Technical Reports Server (NTRS)

DeLoach, Richard; Micol, John R.

2011-01-01

The factors that determine data volume requirements in a typical wind tunnel test are identified. It is suggested that productivity in wind tunnel testing can be enhanced by managing the inference error risk associated with evaluating residuals in a response surface modeling experiment. The relationship between minimum data volume requirements and the factors upon which they depend is described and certain simplifications to this relationship are realized when specific model adequacy criteria are adopted. The question of response model residual evaluation is treated and certain practical aspects of response surface modeling are considered, including inference subspace truncation. A wind tunnel test plan developed by using the Modern Design of Experiments illustrates the advantages of an early estimate of data volume requirements. Comparisons are made with a representative One Factor At a Time (OFAT) wind tunnel test matrix developed to evaluate a surface to air missile.

Ohio's Abandoned Mine Lands Reclamation Program: a Study of Data Collection and Evaluation Techniques

NASA Technical Reports Server (NTRS)

Sperry, S. L.

1982-01-01

The planning process for a statewide reclamation plan of Ohio abandoned minelands in response to the Federal Surface Mining Control and Reclamation Act of 1977 included: (1) the development of a screening and ranking methodology; (2) the establishment of a statewide review of major watersheds affected by mining; (3) the development of an immediate action process; and (4) a prototypical study of a priority watershed demonstrating the data collection, analysis, display and evaluation to be used for the remaining state watersheds. Historical methods for satisfying map information analysis and evaluation, as well as current methodologies being used were discussed. Various computer mapping and analysis programs were examined for their usability in evaluating the priority reclamation sites. Hand methods were chosen over automated procedures; intuitive evaluation was the primary reason.

On the residual stress modeling of shot-peened AISI 4340 steel: finite element and response surface methods

NASA Astrophysics Data System (ADS)

Asgari, Ali; Dehestani, Pouya; Poruraminaie, Iman

2018-02-01

Shot peening is a well-known process in applying the residual stress on the surface of industrial parts. The induced residual stress improves fatigue life. In this study, the effects of shot peening parameters such as shot diameter, shot speed, friction coefficient, and the number of impacts on the applied residual stress will be evaluated. To assess these parameters effect, firstly the shot peening process has been simulated by finite element method. Then, effects of the process parameters on the residual stress have been evaluated by response surface method as a statistical approach. Finally, a strong model is presented to predict the maximum residual stress induced by shot peening process in AISI 4340 steel. Also, the optimum parameters for the maximum residual stress are achieved. The results indicate that effect of shot diameter on the induced residual stress is increased by increasing the shot speed. Also, enhancing the friction coefficient magnitude always cannot lead to increase in the residual stress.

Evaluation of standard methods for collecting and processing fuel moisture samples

Treesearch

Sally M. Haase; José Sánchez; David R. Weise

2016-01-01

A variety of techniques for collecting and processing samples to determine moisture content of wildland fuels in support of fire management activities were evaluated. The effects of using a chainsaw or handsaw to collect samples of largediameter wood, containers for storing and transporting collected samples, and quick-response ovens for estimating moisture content...

Quantitative evaluation of learning and memory trace in studies of mnemotropic effects of immunotropic drugs.

PubMed

Kiseleva, N M; Novoseletskaya, A V; Voevodina, Ye B; Kozlov, I G; Inozemtsev, A N

2012-12-01

Apart from restoration of disordered immunological parameters, tactivin and derinat exhibit a pronounced effect on the higher integrative functions of the brain. Experiments on Wistar rats have shown that these drugs accelerated conditioning of food and defense responses. New methods for quantitative evaluation of memory trace consolidation are proposed.

Application of Kolomogorov-Zurbenko Filter and the decoupled direct 3D method for the dynamic evaluation of a regional air quality model

EPA Science Inventory

Regional air quality models are being used in a policy-setting to estimate the response of air pollutant concentrations to changes in emissions and meteorology. Dynamic evaluation entails examination of a retrospective case(s) to assess whether an air quality model has properly p...

Exploring Instructional Strategies to Develop Prospective Elementary Teachers' Children's Literature Book Evaluation Skills for Science, Ecology and Environmental Education

ERIC Educational Resources Information Center

Hug, J. William

2010-01-01

This article is an auto-ethnographic account of the development of a children's literature book critique assignment by a science teacher educator sharing instructional dilemmas and pedagogical responses. Prospective elementary teachers enrolled in an elementary school science teaching methods course in the US selected and evaluated children's…

A Teratogenic Deformity Index for Evaluating Impacts of Selenium on Fish Populations

Treesearch

A. Dennis Lemly

1997-01-01

This paper describes a method for using teratogenic deformities in fish as the basis for evaluating impacts of selenium contamination. Teratogenicde deformaties are reliable bioindicators of selenium toxicosis in fish. They are produced in response to dietary exposure of parent fish and subsequent deposition of selenium in eggs. There is a close parallel between...

Self-Evaluation Handbook for Hotlines and Youth Crisis Centers.

ERIC Educational Resources Information Center

Baizerman, Michael; And Others

This handbook is a response to Hotline and Youth Crisis Center staff who asked for a guidebook for doing program evaluation. A cross-section of Hotline workers in three Minnesota centers was monitored to define issues and problems or concerns about their programs. The actual program methods used were determined and utilized to formalize a method…

Grassland response to herbicides and seeding of native grasses 6 years posttreatment

Treesearch

Bryan A. Endress; Catherine G. Parks; Bridgett J. Naylor; Steven R. Radosevich; Mark Porter

2012-01-01

Herbicides are the primary method used to control exotic, invasive plants. This study evaluated restoration efforts applied to grasslands dominated by an invasive plant, sulfur cinquefoil, 6 yr after treatments. Of the five herbicides we evaluated, picloram continued to provide the best control of sulfur cinquefoil over 6 yr. We found the timing of picloram...

Direct-location versus verbal report methods for measuring auditory distance perception in the far field.

PubMed

Etchemendy, Pablo E; Spiousas, Ignacio; Calcagno, Esteban R; Abregú, Ezequiel; Eguia, Manuel C; Vergara, Ramiro O

2018-06-01

In this study we evaluated whether a method of direct location is an appropriate response method for measuring auditory distance perception of far-field sound sources. We designed an experimental set-up that allows participants to indicate the distance at which they perceive the sound source by moving a visual marker. We termed this method Cross-Modal Direct Location (CMDL) since the response procedure involves the visual modality while the stimulus is presented through the auditory modality. Three experiments were conducted with sound sources located from 1 to 6 m. The first one compared the perceived distances obtained using either the CMDL device or verbal report (VR), which is the response method more frequently used for reporting auditory distance in the far field, and found differences on response compression and bias. In Experiment 2, participants reported visual distance estimates to the visual marker that were found highly accurate. Then, we asked the same group of participants to report VR estimates of auditory distance and found that the spatial visual information, obtained from the previous task, did not influence their reports. Finally, Experiment 3 compared the same responses that Experiment 1 but interleaving the methods, showing a weak, but complex, mutual influence. However, the estimates obtained with each method remained statistically different. Our results show that the auditory distance psychophysical functions obtained with the CMDL method are less susceptible to previously reported underestimation for distances over 2 m.

Visual evoked potentials in the horse.

PubMed

Ström, L; Ekesten, B

2016-06-21

Electrical potentials generated in the central nervous system in response to brief visual stimuli, flash visual evoked potentials (FVEPs), can be recorded non-invasively over the occipital cortex. FVEPs are used clinically in human medicine and also experimentally in a number of animal species, but the method has not yet been evaluated in the horse. The method would potentially allow the ophthalmologist and equine clinician to evaluate visual impairment caused by disorders affecting post-retinal visual pathways. The aim was to establish a method for recording of FVEPs in horses in a clinical setting and to evaluate the waveform morphology in the normal horse. Ten horses were sedated with a continuous detomidine infusion. Responses were recorded from electrodes placed on the scalp. Several positions were evaluated to determine suitable electrode placement. Flash electroretinograms (FERGs) were recorded simultaneously. To evaluate potential contamination of the FVEP from retinal potentials, a retrobulbar nerve block was performed in two horses and transection of the optic nerve was performed in one horse as a terminal procedure. A series of positive (P) and negative (N) peaks in response to light stimuli was recorded in all horses. Reproducible wavelets with mean times-to-peaks of 26 (N1), 55 (P2), 141 (N2) and 216 ms (P4) were seen in all horses in all recordings. Reproducible results were obtained when the active electrode was placed in the midline rostral to the nuchal crest. Recording at lateral positions gave more variable results, possibly due to ear muscle artifacts. Averaging ≥100 responses reduced the impact of noise and artifacts. FVEPs were reproducible in the same horse during the same recording session and between sessions, but were more variable between horses. Retrobulbar nerve block caused a transient loss of the VEP whereas transection of the optic nerve caused an irreversible loss. We describe the waveform of the equine FVEP and our results show that it is possible to record FVEPs in sedated horses in a clinical setting. The potentials recorded were shown to be of post-retinal origin. Further studies are needed to provide normative data and assess potential clinical use.

Multivariate inference of pathway activity in host immunity and response to therapeutics

PubMed Central

Goel, Gautam; Conway, Kara L.; Jaeger, Martin; Netea, Mihai G.; Xavier, Ramnik J.

2014-01-01

Developing a quantitative view of how biological pathways are regulated in response to environmental factors is central for understanding of disease phenotypes. We present a computational framework, named Multivariate Inference of Pathway Activity (MIPA), which quantifies degree of activity induced in a biological pathway by computing five distinct measures from transcriptomic profiles of its member genes. Statistical significance of inferred activity is examined using multiple independent self-contained tests followed by a competitive analysis. The method incorporates a new algorithm to identify a subset of genes that may regulate the extent of activity induced in a pathway. We present an in-depth evaluation of specificity, robustness, and reproducibility of our method. We benchmarked MIPA's false positive rate at less than 1%. Using transcriptomic profiles representing distinct physiological and disease states, we illustrate applicability of our method in (i) identifying gene–gene interactions in autophagy-dependent response to Salmonella infection, (ii) uncovering gene–environment interactions in host response to bacterial and viral pathogens and (iii) identifying driver genes and processes that contribute to wound healing and response to anti-TNFα therapy. We provide relevant experimental validation that corroborates the accuracy and advantage of our method. PMID:25147207

Winter maintenance performance measure.

DOT National Transportation Integrated Search

2016-01-01

The Winter Performance Index is a method of quantifying winter storm events and the DOTs response to them. : It is a valuable tool for evaluating the States maintenance practices, performing post-storm analysis, training : maintenance personnel...

RETROFITTING POTW

EPA Science Inventory

This manual is intended as a source document for individuals responsible for improving the performance of an existing, non-complying wastewater treatment facility. Described are: 1) methods to evaluate an existing facility's capability to achieve improved performance, 2) a ...

Preventing Data Ambiguity in Infectious Diseases with Four-Dimensional and Personalized Evaluations

PubMed Central

Iandiorio, Michelle J.; Fair, Jeanne M.; Chatzipanagiotou, Stylianos; Ioannidis, Anastasios; Trikka-Graphakos, Eleftheria; Charalampaki, Nikoletta; Sereti, Christina; Tegos, George P.; Hoogesteijn, Almira L.; Rivas, Ariel L.

2016-01-01

Background Diagnostic errors can occur, in infectious diseases, when anti-microbial immune responses involve several temporal scales. When responses span from nanosecond to week and larger temporal scales, any pre-selected temporal scale is likely to miss some (faster or slower) responses. Hoping to prevent diagnostic errors, a pilot study was conducted to evaluate a four-dimensional (4D) method that captures the complexity and dynamics of infectious diseases. Methods Leukocyte-microbial-temporal data were explored in canine and human (bacterial and/or viral) infections, with: (i) a non-structured approach, which measures leukocytes or microbes in isolation; and (ii) a structured method that assesses numerous combinations of interacting variables. Four alternatives of the structured method were tested: (i) a noise-reduction oriented version, which generates a single (one data point-wide) line of observations; (ii) a version that measures complex, three-dimensional (3D) data interactions; (iii) a non-numerical version that displays temporal data directionality (arrows that connect pairs of consecutive observations); and (iv) a full 4D (single line-, complexity-, directionality-based) version. Results In all studies, the non-structured approach revealed non-interpretable (ambiguous) data: observations numerically similar expressed different biological conditions, such as recovery and lack of recovery from infections. Ambiguity was also found when the data were structured as single lines. In contrast, two or more data subsets were distinguished and ambiguity was avoided when the data were structured as complex, 3D, single lines and, in addition, temporal data directionality was determined. The 4D method detected, even within one day, changes in immune profiles that occurred after antibiotics were prescribed. Conclusions Infectious disease data may be ambiguous. Four-dimensional methods may prevent ambiguity, providing earlier, in vivo, dynamic, complex, and personalized information that facilitates both diagnostics and selection or evaluation of anti-microbial therapies. PMID:27411058

Deducing Climatic Elasticity to Assess Projected Climate Change Impacts on Streamflow Change across China

NASA Astrophysics Data System (ADS)

Liu, Jianyu; Zhang, Qiang; Zhang, Yongqiang; Chen, Xi; Li, Jianfeng; Aryal, Santosh K.

2017-10-01

Climatic elasticity has been widely applied to assess streamflow responses to climate changes. To fully assess impacts of climate under global warming on streamflow and reduce the error and uncertainty from various control variables, we develop a four-parameter (precipitation, catchment characteristics n, and maximum and minimum temperatures) climatic elasticity method named PnT, based on the widely used Budyko framework and simplified Makkink equation. We use this method to carry out the first comprehensive evaluation of the streamflow response to potential climate change for 372 widely spread catchments in China. The PnT climatic elasticity was first evaluated for a period 1980-2000, and then used to evaluate streamflow change response to climate change based on 12 global climate models under Representative Concentration Pathway 2.6 (RCP2.6) and RCP 8.5 emission scenarios. The results show that (1) the PnT climatic elasticity method is reliable; (2) projected increasing streamflow takes place in more than 60% of the selected catchments, with mean increments of 9% and 15.4% under RCP2.6 and RCP8.5 respectively; and (3) uncertainties in the projected streamflow are considerable in several regions, such as the Pearl River and Yellow River, with more than 40% of the selected catchments showing inconsistent change directions. Our results can help Chinese policy makers to manage and plan water resources more effectively, and the PnT climatic elasticity should be applied to other parts of the world.

Auditory Middle Latency Responses in Chronic Smokers Compared to Nonsmokers: Differential Effects of Stimulus and Age

ERIC Educational Resources Information Center

Ramkissoon, Ishara; Beverly, Brenda L.

2014-01-01

Purpose: Effects of clicks and tonebursts on early and late auditory middle latency response (AMLR) components were evaluated in young and older cigarette smokers and nonsmokers. Method: Participants ( n = 49) were categorized by smoking and age into 4 groups: (a) older smokers, (b) older nonsmokers, (c) young smokers, and (d) young nonsmokers.…

An NCME Instructional Module on Item-Fit Statistics for Item Response Theory Models

ERIC Educational Resources Information Center

Ames, Allison J.; Penfield, Randall D.

2015-01-01

Drawing valid inferences from item response theory (IRT) models is contingent upon a good fit of the data to the model. Violations of model-data fit have numerous consequences, limiting the usefulness and applicability of the model. This instructional module provides an overview of methods used for evaluating the fit of IRT models. Upon completing…

How Hearing Loss and Age Affect Emotional Responses to Nonspeech Sounds

ERIC Educational Resources Information Center

Picou, Erin M.

2016-01-01

Purpose: The purpose of this study was to evaluate the effects of hearing loss and age on subjective ratings of emotional valence and arousal in response to nonspeech sounds. Method: Three groups of adults participated: 20 younger listeners with normal hearing (M = 24.8 years), 20 older listeners with normal hearing (M = 55.8 years), and 20 older…

Numerical Differentiation Methods for Computing Error Covariance Matrices in Item Response Theory Modeling: An Evaluation and a New Proposal

ERIC Educational Resources Information Center

Tian, Wei; Cai, Li; Thissen, David; Xin, Tao

2013-01-01

In item response theory (IRT) modeling, the item parameter error covariance matrix plays a critical role in statistical inference procedures. When item parameters are estimated using the EM algorithm, the parameter error covariance matrix is not an automatic by-product of item calibration. Cai proposed the use of Supplemented EM algorithm for…

Responsible innovation in port development: the Rotterdam Maasvlakte 2 and the Dalian Dayao Bay extension projects.

PubMed

Ravesteijn, Wim; Liu, Yi; Yan, Ping

2015-01-01

The paper outlines and specifies 'responsible port innovation', introducing the development of a methodological and procedural step-by-step plan for the implementation and evaluation of (responsible) innovations. Subsequently, it uses this as a guideline for the analysis and evaluation of two case-studies. The construction of the Rotterdam Maasvlakte 2 Port meets most of the formulated requirements, though making values more explicit and treating it as a process right from the start could have benefitted the project. The Dalian Dayao Port could improve its decision-making procedures in several respects, including the introduction of new methods to handle value tensions. Both projects show that public support is crucial in responsible port innovation and that it should be not only a multi-faceted but also a multi-level strategy.

Board evaluation and effectiveness: models, components and perspectives.

PubMed

Scharf, M; Marty, D; Barnsley, J

1994-01-01

Health facility boards are being challenged to increase their effectiveness in the face of the changing health care environment. To this end, accreditation standards require boards to develop methods of evaluating their governing function and performance. During a survey of governance issues, the authors interviewed a group of health service executives with respect to board evaluation at their facilities. The responses yielded insights relating to models and components of evaluation, board missions and policies, mentoring programs and trustee education and orientation.

Review on modeling heat transfer and thermoregulatory responses in human body.

PubMed

Fu, Ming; Weng, Wenguo; Chen, Weiwang; Luo, Na

2016-12-01

Several mathematical models of human thermoregulation have been developed, contributing to a deep understanding of thermal responses in different thermal conditions and applications. In these models, the human body is represented by two interacting systems of thermoregulation: the controlling active system and the controlled passive system. This paper reviews the recent research of human thermoregulation models. The accuracy and scope of the thermal models are improved, for the consideration of individual differences, integration to clothing models, exposure to cold and hot conditions, and the changes of physiological responses for the elders. The experimental validated methods for human subjects and manikin are compared. The coupled method is provided for the manikin, controlled by the thermal model as an active system. Computational Fluid Dynamics (CFD) is also used along with the manikin or/and the thermal model, to evaluate the thermal responses of human body in various applications, such as evaluation of thermal comfort to increase the energy efficiency, prediction of tolerance limits and thermal acceptability exposed to hostile environments, indoor air quality assessment in the car and aerospace industry, and design protective equipment to improve function of the human activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

IWGT report on quantitative approaches to genotoxicity risk ...

EPA Pesticide Factsheets

This is the second of two reports from the International Workshops on Genotoxicity Testing (IWGT) Working Group on Quantitative Approaches to Genetic Toxicology Risk Assessment (the QWG). The first report summarized the discussions and recommendations of the QWG related to the need for quantitative dose–response analysis of genetic toxicology data, the existence and appropriate evaluation of threshold responses, and methods to analyze exposure-response relationships and derive points of departure (PoDs) from which acceptable exposure levels could be determined. This report summarizes the QWG discussions and recommendations regarding appropriate approaches to evaluate exposure-related risks of genotoxic damage, including extrapolation below identified PoDs and across test systems and species. Recommendations include the selection of appropriate genetic endpoints and target tissues, uncertainty factors and extrapolation methods to be considered, the importance and use of information on mode of action, toxicokinetics, metabolism, and exposure biomarkers when using quantitative exposure-response data to determine acceptable exposure levels in human populations or to assess the risk associated with known or anticipated exposures. The empirical relationship between genetic damage (mutation and chromosomal aberration) and cancer in animal models was also examined. It was concluded that there is a general correlation between cancer induction and mutagenic and/or clast

Nondestructive tests of regenerative chambers. [evaluating nondestructive methods of determining metal bond integrity

NASA Technical Reports Server (NTRS)

Malone, G. A.; Vecchies, L.; Wood, R.

1974-01-01

The capabilities and limitations of nondestructive evaluation methods were studied to detect and locate bond deficiencies in regeneratively cooled thrust chambers for rocket engines. Flat test panels and a cylinder were produced to simulate regeneratively cooled thrust chamber walls. Planned defects with various bond integrities were produced in the panels to evaluate the sensitivity, accuracy, and limitations of nondestructive methods to define and locate bond anomalies. Holography, acoustic emission, and ultrasonic scan were found to yield sufficient data to discern bond quality when used in combination and in selected sequences. Bonding techniques included electroforming and brazing. Materials of construction included electroformed nickel bonded to Nickel 200 and OFHC copper, electroformed copper bonded to OFHC copper, and 300 series stainless steel brazed to OFHC copper. Variations in outer wall strength, wall thickness, and defect size were evaluated for nondestructive test response.

Studies on DNA damage: discordant responses of rate of DNA disentanglement (viscosimetrically evaluated) and alkaline elution rate, obtained for several compounds. Possible explanations of the discrepancies.

PubMed

Parodi, S; Balbi, C; Abelmoschi, M L; Pala, M; Russo, P; Santi, L

1983-12-01

Alkaline elution is a well-known method for detecting DNA damage. Recently we have developed a viscosimetric method that is even more sensitive than alkaline elution. Here we report that the two methods, although apparently both revealing alkaline DNA fragmentation, can give dramatically different results for a significant series of compounds. We suspect that alkaline elution might reveal not only DNA fragmentation but also the extent of disentanglement of chromatin structure, whereas this DNA disentanglement rate, when evaluated viscosimetrically , is more strictly correlated with the initiation of DNA unwinding.

Using Chinese Version of MYMOP in Chinese Medicine Evaluation: Validity, Responsiveness and Minimally Important Change

PubMed Central

2010-01-01

Background Measure Yourself Medical Outcome Profile (MYMOP) is a patient generated outcome instrument applicable in the evaluation of both allopathic and complementary medicine treatment. This study aims to adapt MYMOP into Chinese, and to assess its validity, responsiveness and minimally important change values in a sample of patients using Chinese medicine (CM) services. Methods A Chinese version of MYMOP (CMYMOP) is developed by forward-backward-forward translation strategy, expert panel assessment and pilot testing amongst patients. 272 patients aged 18 or above with subjective symptoms in the past 2 weeks were recruited at a CM clinic, and were invited to complete a set of questionnaire containing CMYMOP and SF-36. Follow ups were performed at 2nd and 4th week after consultation, using the same set of questionnaire plus a global rating of change question. Criterion validity of CMYMOP was assessed by its correlation with SF-36 at baseline, and responsiveness was evaluated by calculating the Cohen effect size (ES) of change at two follow ups. Minimally important difference (MID) values were estimated via anchor based method, while minimally detectable difference (MDC) figures were calculated by distribution based method. Results Criterion validity of CMYMOP was demonstrated by negative correlation between CMYMOP Profile scores and all SF-36 domain and summary scores at baseline. For responsiveness between baseline and 4th week follow up, ES of CMYMOP Symptom 1, Activity and Profile reached the moderate change threshold (ES>0.5), while Symptom 2 and Wellbeing reached the weak change threshold (ES>0.2). None of the SF-36 scores reached the moderate change threshold, implying CMYMOP's stronger responsiveness in CM setting. At 2nd week follow up, MID values for Symptom 1, Symptom 2, Wellbeing and Profile items were 0.894, 0.580, 0.263 and 0.516 respectively. For Activity item, MDC figure of 0.808 was adopted to estimate MID. Conclusions The findings support the validity and responsiveness of CMYMOP for capturing patient centred clinical changes within 2 weeks in a CM clinical setting. Further researches are warranted (1) to estimate Activity item MID, (2) to assess the test-retest reliability of CMYMOP, and (3) to perform further MID evaluation using multiple, item specific anchor questions. PMID:20920284

Multicellular Tumour Spheroid as a model for evaluation of [18F]FDG as biomarker for breast cancer treatment monitoring

PubMed Central

Monazzam, Azita; Razifar, Pasha; Simonsson, Martin; Qvarnström, Fredrik; Josephsson, Raymond; Blomqvist, Carl; Långström, Bengt; Bergström, Mats

2006-01-01

Background In order to explore a pre-clinical method to evaluate if [18F]FDG is valid for monitoring early response, we investigated the uptake of FDG in Multicellular tumour spheroids (MTS) without and with treatment with five routinely used chemotherapy agents in breast cancer. Methods The response to each anticancer treatment was evaluated by measurement of the [18F]FDG uptake and viable volume of the MTSs after 2 and 3 days of treatment. Results The effect of Paclitaxel and Docetaxel on [18F]FDG uptake per viable volume was more evident in BT474 (up to 55% decrease) than in MCF-7 (up to 25% decrease). Doxorubicin reduced the [18F]FDG uptake per viable volume more noticeable in MCF-7 (25%) than in BT474 MTSs. Tamoxifen reduced the [18F]FDG uptake per viable volume only in MCF-7 at the highest dose of 1 μM. No effect of Imatinib was observed. Conclusion MTS was shown to be appropriate to investigate the potential of FDG-PET for early breast cancer treatment monitoring; the treatment effect can be observed before any tumour size changes occur. The combination of PET radiotracers and image analysis in MTS provides a good model to evaluate the relationship between tumour volume and the uptake of metabolic tracer before and after chemotherapy. This feature could be used for screening and selecting PET-tracers for early assessment of treatment response. In addition, this new method gives a possibility to assess quickly, and in vitro, a good preclinical profile of existing and newly developed anti-cancer drugs. PMID:16556298

Development and validation of an UPLC method for determination of content uniformity in low-dose solid drugs products using the design space approach.

PubMed

Oliva, Alexis; Fariña, José B; Llabrés, Matías

2013-10-15

A simple and reproducible UPLC method was developed and validated for the quantitative analysis of finasteride in low-dose drug products. Method validation demonstrated the reliability and consistency of analytical results. Due to the regulatory requirements of pharmaceutical analysis in particular, evaluation of robustness is vital to predict how small variations in operating conditions affect the responses. Response surface methodology as an optimization technique was used to evaluate the robustness. For this, a central composite design was implemented around the nominal conditions. Statistical treatment of the responses (retention factor and drug concentrations expressed as percentage of label claim) showed that methanol content in mobile-phase and flow rate were the most influential factors. In the optimization process, the compromise decision support problem (cDSP) strategy was used. Construction of the robust domain from response-surfaces provided tolerance windows for the factors affecting the effectiveness of the method. The specified limits for the USP uniformity of dosage units assay (98.5-101.5%) and the purely experimental variations based on the repeatability test for center points (nominal conditions repetitions) were used as criteria to establish the tolerance windows, which allowed definition design space (DS) of analytical method. Thus, the acceptance criteria values (AV) proposed by the USP-uniformity of assay only depend on the sampling error. If the variation in the responses corresponded to approximately twice the repeatability standard deviation, individual values for percentage label claim (%LC) response may lie outside the specified limits; this implies the data are not centered between the specified limits, and that this term plus the sampling error affects the AV value. To avoid this fact, the limits specified by the Uniformity of Dosage Form assay (i.e., 98.5-101.5%) must be taken into consideration to fix the tolerance windows for each factor. All these results were verified by the Monte Carlo simulation. In conclusion, the level of variability for different factors must be calculated for each case, and not arbitrary way, provided a variation is found higher than the repeatability for center points and secondly, the %LC response must lie inside the specified limits i.e., 98.5-101.5%. If not the UPLC method must be re-developed. © 2013 Elsevier B.V. All rights reserved.

Comprehensive Evaluation of Fast-Response, Reynolds-Averaged Navier–Stokes, and Large-Eddy Simulation Methods Against High-Spatial-Resolution Wind-Tunnel Data in Step-Down Street Canyons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hayati, Arash Nemati; Stoll, Rob; Kim, J. J.

Three computational fluid dynamics (CFD) methods with different levels of flow-physics modelling are comprehensively evaluated against high-spatial-resolution wind-tunnel velocity data from step-down street canyons (i.e., a short building downwind of a tall building). The first method is a semi-empirical fast-response approach using the Quick Urban Industrial Complex (QUIC-URB) model. The second method solves the Reynolds-averaged Navier–Stokes (RANS) equations, and the third one utilizes a fully-coupled fluid-structure interaction large-eddy simulation (LES) model with a grid-turbulence inflow generator. Unlike typical point-by-point evaluation comparisons, here the entire two-dimensional wind-tunnel dataset is used to evaluate the dynamics of dominant flow topological features in themore » street canyon. Each CFD method is scrutinized for several geometric configurations by varying the downwind-to-upwind building-height ratio (H d/H u) and street canyon-width to building-width aspect ratio (S / W) for inflow winds perpendicular to the upwind building front face. Disparities between the numerical results and experimental data are quantified in terms of their ability to capture flow topological features for different geometric configurations. Ultimately, all three methods qualitatively predict the primary flow topological features, including a saddle point and a primary vortex. But, the secondary flow topological features, namely an in-canyon separation point and secondary vortices, are only well represented by the LES method despite its failure for taller downwind building cases. Misrepresentation of flow-regime transitions, exaggeration of the coherence of recirculation zones and wake fields, and overestimation of downwards vertical velocity into the canyon are the main defects in QUIC-URB, RANS and LES results, respectively. All three methods underestimate the updrafts and, surprisingly, QUIC-URB outperforms RANS for the streamwise velocity component, while RANS is superior to QUIC-URB for the vertical velocity component in the street canyon.« less

Comprehensive Evaluation of Fast-Response, Reynolds-Averaged Navier–Stokes, and Large-Eddy Simulation Methods Against High-Spatial-Resolution Wind-Tunnel Data in Step-Down Street Canyons

DOE PAGES

Hayati, Arash Nemati; Stoll, Rob; Kim, J. J.; ...

2017-05-18

Three computational fluid dynamics (CFD) methods with different levels of flow-physics modelling are comprehensively evaluated against high-spatial-resolution wind-tunnel velocity data from step-down street canyons (i.e., a short building downwind of a tall building). The first method is a semi-empirical fast-response approach using the Quick Urban Industrial Complex (QUIC-URB) model. The second method solves the Reynolds-averaged Navier–Stokes (RANS) equations, and the third one utilizes a fully-coupled fluid-structure interaction large-eddy simulation (LES) model with a grid-turbulence inflow generator. Unlike typical point-by-point evaluation comparisons, here the entire two-dimensional wind-tunnel dataset is used to evaluate the dynamics of dominant flow topological features in themore » street canyon. Each CFD method is scrutinized for several geometric configurations by varying the downwind-to-upwind building-height ratio (H d/H u) and street canyon-width to building-width aspect ratio (S / W) for inflow winds perpendicular to the upwind building front face. Disparities between the numerical results and experimental data are quantified in terms of their ability to capture flow topological features for different geometric configurations. Ultimately, all three methods qualitatively predict the primary flow topological features, including a saddle point and a primary vortex. But, the secondary flow topological features, namely an in-canyon separation point and secondary vortices, are only well represented by the LES method despite its failure for taller downwind building cases. Misrepresentation of flow-regime transitions, exaggeration of the coherence of recirculation zones and wake fields, and overestimation of downwards vertical velocity into the canyon are the main defects in QUIC-URB, RANS and LES results, respectively. All three methods underestimate the updrafts and, surprisingly, QUIC-URB outperforms RANS for the streamwise velocity component, while RANS is superior to QUIC-URB for the vertical velocity component in the street canyon.« less

Comprehensive Evaluation of Fast-Response, Reynolds-Averaged Navier-Stokes, and Large-Eddy Simulation Methods Against High-Spatial-Resolution Wind-Tunnel Data in Step-Down Street Canyons

NASA Astrophysics Data System (ADS)

Hayati, Arash Nemati; Stoll, Rob; Kim, J. J.; Harman, Todd; Nelson, Matthew A.; Brown, Michael J.; Pardyjak, Eric R.

2017-08-01

Three computational fluid dynamics (CFD) methods with different levels of flow-physics modelling are comprehensively evaluated against high-spatial-resolution wind-tunnel velocity data from step-down street canyons (i.e., a short building downwind of a tall building). The first method is a semi-empirical fast-response approach using the Quick Urban Industrial Complex (QUIC-URB) model. The second method solves the Reynolds-averaged Navier-Stokes (RANS) equations, and the third one utilizes a fully-coupled fluid-structure interaction large-eddy simulation (LES) model with a grid-turbulence inflow generator. Unlike typical point-by-point evaluation comparisons, here the entire two-dimensional wind-tunnel dataset is used to evaluate the dynamics of dominant flow topological features in the street canyon. Each CFD method is scrutinized for several geometric configurations by varying the downwind-to-upwind building-height ratio (H_d/H_u) and street canyon-width to building-width aspect ratio ( S / W) for inflow winds perpendicular to the upwind building front face. Disparities between the numerical results and experimental data are quantified in terms of their ability to capture flow topological features for different geometric configurations. Overall, all three methods qualitatively predict the primary flow topological features, including a saddle point and a primary vortex. However, the secondary flow topological features, namely an in-canyon separation point and secondary vortices, are only well represented by the LES method despite its failure for taller downwind building cases. Misrepresentation of flow-regime transitions, exaggeration of the coherence of recirculation zones and wake fields, and overestimation of downwards vertical velocity into the canyon are the main defects in QUIC-URB, RANS and LES results, respectively. All three methods underestimate the updrafts and, surprisingly, QUIC-URB outperforms RANS for the streamwise velocity component, while RANS is superior to QUIC-URB for the vertical velocity component in the street canyon.

An in vivo model for evaluating the response of pulp to various biomaterials.

PubMed

McClugage, S G; Holmstedt, J O; Malloy, R B

1980-09-01

An in vivo model has been designed to study the acute response of exposed or unexposed dental pulp to the topical application of various biomaterials. This model permits sequential microscopic observations of the microvascular system of dental pulp before and after application of pulp capping agents, cementing agents, or cavity liners. The use of this experimental model provides useful information related to the tolerability of dental pulp to various biomaterials used in dentistry. Furthermore, this model serves as a useful supplement to more traditional long term methods for evaluating the biocompatability of dental materials.

A study of the stress wave factor technique for nondestructive evaluation of composite materials

NASA Technical Reports Server (NTRS)

Sarrafzadeh-Khoee, A.; Kiernan, M. T.; Duke, J. C., Jr.; Henneke, E. G., II

1986-01-01

The acousto-ultrasonic method of nondestructive evaluation is an extremely sensitive means of assessing material response. Efforts continue to complete the understanding of this method. In order to achieve the full sensitivity of the technique, extreme care must be taken in its performance. This report provides an update of the efforts to advance the understanding of this method and to increase its application to the nondestructive evaluation of composite materials. Included are descriptions of a novel optical system that is capable of measuring in-plane and out-of-plane displacements, an IBM PC-based data acquisition system, an extensive data analysis software package, the azimuthal variation of acousto-ultrasonic behavior in graphite/epoxy laminates, and preliminary examination of processing variation in graphite-aluminum tubes.

Development of the science of mass casualty incident management: reflection on the medical response to the Wenchuan earthquake and Hangzhou bus fire*

PubMed Central

Shen, Wei-feng; Jiang, Li-bing; Jiang, Guan-yu; Zhang, Mao; Ma, Yue-feng; He, Xiao-jun

2014-01-01

Objective: In this paper, we review the previous classic research paradigms of a mass casualty incident (MCI) systematically and reflect the medical response to the Wenchuan earthquake and Hangzhou bus fire, in order to outline and develop an improved research paradigm for MCI management. Methods: We searched PubMed, EMBASE, China Wanfang, and China Biology Medicine (CBM) databases for relevant studies. The following key words and medical subject headings were used: ‘mass casualty incident’, ‘MCI’, ‘research method’, ‘Wenchuan’, ‘earthquake’, ‘research paradigm’, ‘science of surge’, ‘surge’, ‘surge capacity’, and ‘vulnerability’. Searches were performed without year or language restriction. After searching the four literature databases using the above listed key words and medical subject headings, related articles containing research paradigms of MCI, 2008 Wenchuan earthquake, July 5 bus fire, and science of surge and vulnerability were independently included by two authors. Results: The current progresses on MCI management include new golden hour, damage control philosophy, chain of survival, and three links theory. In addition, there are three evaluation methods (medical severity index (MSI), potential injury creating event (PICE) classification, and disaster severity scale (DSS)), which can dynamically assess the MCI situations and decisions for MCI responses and can be made based on the results of such evaluations. However, the three methods only offer a retrospective evaluation of MCI and thus fail to develop a real-time assessment of MCI responses. Therefore, they cannot be used as practical guidance for decision-making during MCI. Although the theory of surge science has made great improvements, we found that a very important factor has been ignored—vulnerability, based on reflecting on the MCI response to the 2008 Wenchuan earthquake and July 5 bus fire in Hangzhou. Conclusions: This new paradigm breaks through the limitation of traditional research paradigms and will contribute to the development of a methodology for disaster research. PMID:25471837

Temperature- and pH-responsive nanoparticles of biocompatible polyurethanes for doxorubicin delivery.

PubMed

Wang, Anning; Gao, Hui; Sun, Yanfang; Sun, Yu-long; Yang, Ying-Wei; Wu, Guolin; Wang, Yinong; Fan, Yunge; Ma, Jianbiao

2013-01-30

A series of temperature- and pH-responsive polyurethanes based on hexamethylene diisocyanate (HDI) and 4,4'-diphenylmethane diisocyanate (MDI) were synthesized by a coupling reaction with bis-1,4-(hydroxyethyl) piperazine (HEP), N-methyldiethanolamine (MDEA) and N-butyldiethanolamine (BDEA), respectively. The chemical structure, molecular weight, thermal property and crystallization properties were characterized by Fourier transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and X-ray diffraction (XRD) spectroscopy. The resulting polyurethanes were then used to prepare nanoparticles either by direct dispersion method or dialysis method. Their pH and temperature responsibilities were evaluated by optical transmittance and size measurement in aqueous media. Interestingly, HDI-based and MDI-based polyurethanes exhibited different pH and temperature responsive properties. Nanoparticles based on HDI-HEP and HDI-MDEA were temperature-responsive, while MDI-based biomaterials were not. All of them showed pH-sensitive behavior. The possible responsive mechanism was investigated by (1)H NMR spectroscopy. The cytotoxicity of the polyurethanes was evaluated using methylthiazoletetrazolium (MTT) assay in vitro. It was shown that the HDI-based polyurethanes were non-toxic, and could be applied to doxorubicin (DOX) encapsulation. The experimental results indicated that DOX could be efficiently encapsulated into polyurethane nanoparticles and uptaken by Huh-7 cells. The loaded DOX molecules could be released from the drug-loaded polyurethane nanoparticles upon pH and temperature changes, responsively. Copyright © 2012 Elsevier B.V. All rights reserved.

The frequency of U-shaped dose responses in the toxicological literature.

PubMed

Calabrese, E J; Baldwin, L A

2001-08-01

Hormesis has been defined as a dose-response relationship in which there is a stimulatory response at low doses, but an inhibitory response at high doses, resulting in a U- or inverted U-shaped dose response. To assess the proportion of studies satisfying criteria for evidence of hormesis, a database was created from published toxicological literature using rigorous a priori entry and evaluative criteria. One percent (195 out of 20,285) of the published articles contained 668 dose-response relationships that met the entry criteria. Subsequent application of evaluative criteria revealed that 245 (37% of 668) dose-response relationships from 86 articles (0.4% of 20,285) satisfied requirements for evidence of hormesis. Quantitative evaluation of false-positive and false-negative responses indicated that the data were not very susceptible to such influences. A complementary analysis of all dose responses assessed by hypothesis testing or distributional analyses, where the units of comparison were treatment doses below the NOAEL, revealed that of 1089 doses below the NOAEL, 213 (19.5%) satisfied statistical significance or distributional data evaluative criteria for hormesis, 869 (80%) did not differ from the control, and 7 (0.6%) displayed evidence of false-positive values. The 32.5-fold (19.5% vs 0.6%) greater occurrence of hormetic responses than a response of similar magnitude in the opposite (negative) direction strongly supports the nonrandom nature of hormetic responses. This study, which provides the first documentation of a data-derived frequency of hormetic responses in the toxicologically oriented literature, indicates that when the study design satisfies a priori criteria (i.e., a well-defined NOAEL, > or = 2 doses below the NOAEL, and the end point measured has the capacity to display either stimulatory or inhibitory responses), hormesis is frequently encountered and is broadly represented according to agent, model, and end point. These findings have broad-based implications for study design, risk assessment methods, and the establishment of optimal drug doses and suggest important evolutionarily adaptive strategies for dose-response relationships.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aghaei, Faranak; Tan, Maxine; Liu, Hong

Purpose: To identify a new clinical marker based on quantitative kinetic image features analysis and assess its feasibility to predict tumor response to neoadjuvant chemotherapy. Methods: The authors assembled a dataset involving breast MR images acquired from 68 cancer patients before undergoing neoadjuvant chemotherapy. Among them, 25 patients had complete response (CR) and 43 had partial and nonresponse (NR) to chemotherapy based on the response evaluation criteria in solid tumors. The authors developed a computer-aided detection scheme to segment breast areas and tumors depicted on the breast MR images and computed a total of 39 kinetic image features from bothmore » tumor and background parenchymal enhancement regions. The authors then applied and tested two approaches to classify between CR and NR cases. The first one analyzed each individual feature and applied a simple feature fusion method that combines classification results from multiple features. The second approach tested an attribute selected classifier that integrates an artificial neural network (ANN) with a wrapper subset evaluator, which was optimized using a leave-one-case-out validation method. Results: In the pool of 39 features, 10 yielded relatively higher classification performance with the areas under receiver operating characteristic curves (AUCs) ranging from 0.61 to 0.78 to classify between CR and NR cases. Using a feature fusion method, the maximum AUC = 0.85 ± 0.05. Using the ANN-based classifier, AUC value significantly increased to 0.96 ± 0.03 (p < 0.01). Conclusions: This study demonstrated that quantitative analysis of kinetic image features computed from breast MR images acquired prechemotherapy has potential to generate a useful clinical marker in predicting tumor response to chemotherapy.« less

Analysis of shape memory alloy sensory particles for damage detection via substructure and continuum damage modeling

NASA Astrophysics Data System (ADS)

Bielefeldt, Brent R.; Benzerga, A. Amine; Hartl, Darren J.

2016-04-01

The ability to monitor and predict the structural health of an aircraft is of growing importance to the aerospace industry. Currently, structural inspections and maintenance are based upon experiences with similar aircraft operating in similar conditions. While effective, these methods are time-intensive and unnecessary if the aircraft is not in danger of structural failure. It is imagined that future aircraft will utilize non-destructive evaluation methods, allowing for the near real-time monitoring of structural health. A particularly interesting method involves utilizing the unique transformation response of shape memory alloy (SMA) particles embedded in an aircraft structure. By detecting changes in the mechanical and/or electromagnetic responses of embedded particles, operators could detect the formation or propagation of fatigue cracks in the vicinity of these particles. This work focuses on a finite element model of SMA particles embedded in an aircraft wing using a substructure modeling approach in which degrees of freedom are retained only at specified points of connection to other parts or the application of boundary conditions, greatly reducing computational cost. Previous work evaluated isolated particle response to a static crack to numerically demonstrate and validate this damage detection method. This paper presents the implementation of a damage model to account for crack propagation and examine for the first time the effect of particle configuration and/or relative placement with respect to the ability to detect damage.

Evaluating care from a care ethical perspective:: A pilot study.

PubMed

Kuis, Esther E; Goossensen, Anne

2017-08-01

Care ethical theories provide an excellent opening for evaluation of healthcare practices since searching for (moments of) good care from a moral perspective is central to care ethics. However, a fruitful way to translate care ethical insights into measurable criteria and how to measure these criteria has as yet been unexplored: this study describes one of the first attempts. To investigate whether the emotional touchpoint method is suitable for evaluating care from a care ethical perspective. An adapted version of the emotional touchpoint interview method was used. Touchpoints represent the key moments to the experience of receiving care, where the patient recalls being touched emotionally or cognitively. Participants and research context: Interviews were conducted at three different care settings: a hospital, mental healthcare institution and care facility for older people. A total of 31 participants (29 patients and 2 relatives) took part in the study. Ethical considerations: The research was found not to be subject to the (Dutch) Medical Research Involving Human Subjects Act. A three-step care ethical evaluation model was developed and described using two touchpoints as examples. A focus group meeting showed that the method was considered of great value for partaking institutions in comparison with existing methods. Reflection and discussion: Considering existing methods to evaluate quality of care, the touchpoint method belongs to the category of instruments which evaluate the patient experience. The touchpoint method distinguishes itself because no pre-defined categories are used but the values of patients are followed, which is an essential issue from a care ethical perspective. The method portrays the insider perspective of patients and thereby contributes to humanizing care. The touchpoint method is a valuable instrument for evaluating care; it generates evaluation data about the core care ethical principle of responsiveness.

Applying mixed methods to pretest the Pressure Ulcer Quality of Life (PU-QOL) instrument.

PubMed

Gorecki, C; Lamping, D L; Nixon, J; Brown, J M; Cano, S

2012-04-01

Pretesting is key in the development of patient-reported outcome (PRO) instruments. We describe a mixed-methods approach based on interviews and Rasch measurement methods in the pretesting of the Pressure Ulcer Quality of Life (PU-QOL) instrument. We used cognitive interviews to pretest the PU-QOL in 35 patients with pressure ulcers with the view to identifying problematic items, followed by Rasch analysis to examine response options, appropriateness of the item series and biases due to question ordering (item fit). We then compared findings in an interactive and iterative process to identify potential strengths and weaknesses of PU-QOL items, and guide decision-making about further revisions to items and design/layout. Although cognitive interviews largely supported items, they highlighted problems with layout, response options and comprehension. Findings from the Rasch analysis identified problems with response options through reversed thresholds. The use of a mixed-methods approach in pretesting the PU-QOL instrument proved beneficial for identifying problems with scale layout, response options and framing/wording of items. Rasch measurement methods are a useful addition to standard qualitative pretesting for evaluating strengths and weaknesses of early stage PRO instruments.

Evaluating the efficacies of Maximum Tolerated Dose and metronomic chemotherapies: A mathematical approach

NASA Astrophysics Data System (ADS)

Guiraldello, Rafael T.; Martins, Marcelo L.; Mancera, Paulo F. A.

2016-08-01

We present a mathematical model based on partial differential equations that is applied to understand tumor development and its response to chemotherapy. Our primary aim is to evaluate comparatively the efficacies of two chemotherapeutic protocols, Maximum Tolerated Dose (MTD) and metronomic, as well as two methods of drug delivery. Concerning therapeutic outcomes, the metronomic protocol proves more effective in prolonging the patient's life than MTD. Moreover, a uniform drug delivery method combined with the metronomic protocol is the most efficient strategy to reduce tumor density.

Icing simulation: A survey of computer models and experimental facilities

NASA Technical Reports Server (NTRS)

Potapczuk, M. G.; Reinmann, J. J.

1991-01-01

A survey of the current methods for simulation of the response of an aircraft or aircraft subsystem to an icing encounter is presented. The topics discussed include a computer code modeling of aircraft icing and performance degradation, an evaluation of experimental facility simulation capabilities, and ice protection system evaluation tests in simulated icing conditions. Current research focussed on upgrading simulation fidelity of both experimental and computational methods is discussed. The need for increased understanding of the physical processes governing ice accretion, ice shedding, and iced airfoil aerodynamics is examined.

Icing simulation: A survey of computer models and experimental facilities

NASA Technical Reports Server (NTRS)

Potapczuk, M. G.; Reinmann, J. J.

1991-01-01

A survey of the current methods for simulation of the response of an aircraft or aircraft subsystem to an icing encounter is presented. The topics discussed include a computer code modeling of aircraft icing and performance degradation, an evaluation of experimental facility simulation capabilities, and ice protection system evaluation tests in simulated icing conditions. Current research focused on upgrading simulation fidelity of both experimental and computational methods is discussed. The need for the increased understanding of the physical processes governing ice accretion, ice shedding, and iced aerodynamics is examined.

Response Functions for Neutron Skyshine Analyses

NASA Astrophysics Data System (ADS)

Gui, Ah Auu

Neutron and associated secondary photon line-beam response functions (LBRFs) for point monodirectional neutron sources and related conical line-beam response functions (CBRFs) for azimuthally symmetric neutron sources are generated using the MCNP Monte Carlo code for use in neutron skyshine analyses employing the internal line-beam and integral conical-beam methods. The LBRFs are evaluated at 14 neutron source energies ranging from 0.01 to 14 MeV and at 18 emission angles from 1 to 170 degrees. The CBRFs are evaluated at 13 neutron source energies in the same energy range and at 13 source polar angles (1 to 89 degrees). The response functions are approximated by a three parameter formula that is continuous in source energy and angle using a double linear interpolation scheme. These response function approximations are available for a source-to-detector range up to 2450 m and for the first time, give dose equivalent responses which are required for modern radiological assessments. For the CBRF, ground correction factors for neutrons and photons are calculated and approximated by empirical formulas for use in air-over-ground neutron skyshine problems with azimuthal symmetry. In addition, a simple correction procedure for humidity effects on the neutron skyshine dose is also proposed. The approximate LBRFs are used with the integral line-beam method to analyze four neutron skyshine problems with simple geometries: (1) an open silo, (2) an infinite wall, (3) a roofless rectangular building, and (4) an infinite air medium. In addition, two simple neutron skyshine problems involving an open source silo are analyzed using the integral conical-beam method. The results obtained using the LBRFs and the CBRFs are then compared with MCNP results and results of previous studies.

A Model-Free Diagnostic for Single-Peakedness of Item Responses Using Ordered Conditional Means.

PubMed

Polak, Marike; de Rooij, Mark; Heiser, Willem J

2012-09-01

In this article we propose a model-free diagnostic for single-peakedness (unimodality) of item responses. Presuming a unidimensional unfolding scale and a given item ordering, we approximate item response functions of all items based on ordered conditional means (OCM). The proposed OCM methodology is based on Thurstone & Chave's (1929) criterion of irrelevance, which is a graphical, exploratory method for evaluating the "relevance" of dichotomous attitude items. We generalized this criterion to graded response items and quantified the relevance by fitting a unimodal smoother. The resulting goodness-of-fit was used to determine item fit and aggregated scale fit. Based on a simulation procedure, cutoff values were proposed for the measures of item fit. These cutoff values showed high power rates and acceptable Type I error rates. We present 2 applications of the OCM method. First, we apply the OCM method to personality data from the Developmental Profile; second, we analyze attitude data collected by Roberts and Laughlin (1996) concerning opinions of capital punishment.

Defining Clinical Response Criteria and Early Response Criteria for Precision Oncology: Current State-of-the-Art and Future Perspectives.

PubMed

Subbiah, Vivek; Chuang, Hubert H; Gambhire, Dhiraj; Kairemo, Kalevi

2017-02-15

In this era of precision oncology, there has been an exponential growth in the armamentarium of genomically targeted therapies and immunotherapies. Evaluating early responses to precision therapy is essential for "go" versus "no go" decisions for these molecularly targeted drugs and agents that arm the immune system. Many different response assessment criteria exist for use in solid tumors and lymphomas. We reviewed the literature using the Medline/PubMed database for keywords "response assessment" and various known response assessment criteria published up to 2016. In this article we review the commonly used response assessment criteria. We present a decision tree to facilitate selection of appropriate criteria. We also suggest methods for standardization of various response assessment criteria. The relevant response assessment criteria were further studied for rational of development, key features, proposed use and acceptance by various entities. We also discuss early response evaluation and provide specific case studies of early response to targeted therapy. With high-throughput, advanced computing programs and digital data-mining it is now possible to acquire vast amount of high quality imaging data opening up a new field of "omics in radiology"-radiomics that complements genomics for personalized medicine. Radiomics is rapidly evolving and is still in the research arena. This cutting-edge technology is poised to move soon to the mainstream clinical arena. Novel agents with new mechanisms of action require advanced molecular imaging as imaging biomarkers. There is an urgent need for development of standardized early response assessment criteria for evaluation of response to precision therapy.

Implementing novel imaging methods for improved diagnosis of disorder of consciousness patients.

PubMed

Bick, Atira S; Leker, Ronen R; Ben-Hur, Tamir; Levin, Netta

2013-11-15

The clinical evaluation of consciousness in disorder of consciousness (DOC) patients based on their exhibited behavior is difficult and remains erroneous in many cases. Recent studies demonstrated different levels of stimulus processing as well as evidence of some level of awareness in sub-groups of these patients. The aim of the current study was to examine the plausibility and challenges of implementing a clinical service for evaluation of consciousness level in DOC patients. Eleven Patients (ages 11-67) diagnosed as being in vegetative or minimal conscious states were included. Functional MRI evaluations included auditory, language, voice familiarity, imagery, and visual tests. In 9 patients auditory-related activation was found, however only in 5 of the subjects was differential activation found for language. Six patients exhibited differential response to their own name. In three patients a response to visual stimuli was identified. In one patient the auditory and linguistic systems were clearly activated in a hierarchical pattern, and moreover willful modulation of brain activity was identified in the imagery test. We discuss the importance of using a wide battery of tests, the difference between our clinical cohort and previous publications, as well as the challenges of clinically implementing this method. Translating novel imaging methods into the clinical evaluation of DOC patients is essential for better diagnosis and may encourage treatment development. © 2013 Elsevier B.V. All rights reserved.

Linear response coupled cluster theory with the polarizable continuum model within the singles approximation for the solvent response.

PubMed

Caricato, Marco

2018-04-07

We report the theory and the implementation of the linear response function of the coupled cluster (CC) with the single and double excitations method combined with the polarizable continuum model of solvation, where the correlation solvent response is approximated with the perturbation theory with energy and singles density (PTES) scheme. The singles name is derived from retaining only the contribution of the CC single excitation amplitudes to the correlation density. We compare the PTES working equations with those of the full-density (PTED) method. We then test the PTES scheme on the evaluation of excitation energies and transition dipoles of solvated molecules, as well as of the isotropic polarizability and specific rotation. Our results show a negligible difference between the PTED and PTES schemes, while the latter affords a significantly reduced computational cost. This scheme is general and can be applied to any solvation model that includes mutual solute-solvent polarization, including explicit models. Therefore, the PTES scheme is a competitive approach to compute response properties of solvated systems using CC methods.

Linear response coupled cluster theory with the polarizable continuum model within the singles approximation for the solvent response

NASA Astrophysics Data System (ADS)

Caricato, Marco

2018-04-01

We report the theory and the implementation of the linear response function of the coupled cluster (CC) with the single and double excitations method combined with the polarizable continuum model of solvation, where the correlation solvent response is approximated with the perturbation theory with energy and singles density (PTES) scheme. The singles name is derived from retaining only the contribution of the CC single excitation amplitudes to the correlation density. We compare the PTES working equations with those of the full-density (PTED) method. We then test the PTES scheme on the evaluation of excitation energies and transition dipoles of solvated molecules, as well as of the isotropic polarizability and specific rotation. Our results show a negligible difference between the PTED and PTES schemes, while the latter affords a significantly reduced computational cost. This scheme is general and can be applied to any solvation model that includes mutual solute-solvent polarization, including explicit models. Therefore, the PTES scheme is a competitive approach to compute response properties of solvated systems using CC methods.

Report of the Peer Review Panel on the early site suitability evaluation of the Potential Repository Site at Yucca Mountain, Nevada; Yucca Mountain Site Characterization Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1992-01-01

The US Department of Energy (DOE) Yucca mountain Site Characterization Project Office (YMPO) assigned Science Applications International Corporation (SAIC), the Technical and Management Support Services (T&MSS) contractor to the YmPo, the task of conducting an Early Site Suitability Evaluation (ESSE) of the Yucca mountain site as a potential site for a high-level radioactive waste repository. First, the assignment called for the development of a method to evaluate a single site against the DOE General Guidelines for Recommendation of Sites for Nuclear Waste Repositories, 10 CFR Part 960. Then, using this method, an evaluation team, the ESSE Core Team, of seniormore » YMP scientists, engineers, and technical experts, evaluated new information obtained about the site since publication of the final Environmental Assessment (DOE, 1986) to determine if new suitability/unsuitability findings could be recommended. Finally, the Core Team identified further information and analyses needed to make final determinations for each of the guidelines. As part of the task, an independent peer review of the ESSE report has been conducted. Expertise was solicited that covered the entire spectrum of siting guidelines in 10 CFR Part 960 in order to provide a complete, in-depth critical review of the data evaluated and cited in the ESSE report, the methods used to evaluate the data, and the conclusions and recommendations offered by the report. Fourteen nationally recognized technical experts (Table 2) served on the Peer Review Panel. The comments from the Panel and the responses prepared by the ESSE Core Team, documented on formal Comment Response Forms, constitute the body of this document.« less

Design of piezoelectric probe for measurement of longitudinal and shear components of elastic wave

NASA Astrophysics Data System (ADS)

Aoyanagi, Masafumi; Wakatsuki, Naoto; Mizutani, Koichi; Ebihara, Tadashi

2017-07-01

We focus on ultrasonic probes for nondestructive tests and evaluation. Transient characteristics of probes are important for nondestructive tests such as the pulse echo method. We previously reported the principle of measurement using a piezoelectric probe with triaxial sensitivities. In the results, it was calculated that the probe could transmit and receive particle displacement which contains normal and tangential components. It was confirmed that the probe had sensitivities in triaxial directions. However, its performance in terms of frequency and transient characteristics has not been evaluated. The purpose of this study is to design a probe by changing its shape to obtain better performance. The transient characteristics of probes in longitudinal and shear driving were evaluated by the inverse Fourier transformation of frequency responses of longitudinal and shear components, using the two-dimensional finite element method. As a result, the sensitivities at the dips of frequency characteristics increased when using our probe compared with those measured using conventional probes in longitudinal and shear driving. Hence, the performance in terms of the frequency response was improved by more than 3 dB under the conditions in this simulation. Also, the pulse width of impulse response was decreased by half compared with that of probes with conventional shapes.

Randomized study of teriflunomide effects on immune responses to neoantigen and recall antigens

PubMed Central

Wiendl, Heinz; Miller, Barry; Benamor, Myriam; Truffinet, Philippe; Church, Meg; Menguy-Vacheron, Francoise

2015-01-01

Objective: To evaluate immune responses to neoantigen and recall antigens in healthy subjects treated with teriflunomide. Methods: This was a randomized, double-blind, placebo-controlled study. Subjects received oral teriflunomide (70 mg once daily for 5 days followed by 14 mg once daily for 25 days) or placebo for 30 days. Antibody responses were evaluated following rabies vaccination (neoantigen) applied at days 5, 12, and 31 of the treatment period. Occurrence of delayed-type hypersensitivity (DTH) to Candida albicans, Trichophyton, and tuberculin (recall antigens) was assessed before and at the end of treatment to investigate cellular memory response. Safety and pharmacokinetics were evaluated. Results: Forty-six randomized subjects were treated (teriflunomide, n = 23; placebo, n = 23) and completed the rabies vaccination. Geometric mean titers for rabies antibodies were lower with teriflunomide at days 31 and 38 than with placebo. However, all subjects achieved sufficient seroprotection following rabies vaccination (titers well above the 0.5 IU/mL threshold). Overall, the DTH response to recall antigens in the teriflunomide group did not notably differ from responses in the placebo group. Conclusions: Following vaccination, geometric mean titers for rabies antibodies were lower with teriflunomide than with placebo. However, teriflunomide did not limit the ability to achieve seroprotective titers against this neoantigen. Evaluation of DTH showed that teriflunomide had no adverse impact on the cellular memory response to recall antigens. Classification of evidence: This study provides Class II evidence that in normal subjects treated with teriflunomide, antibody titer responses to rabies vaccination are lower than with placebo but sufficient for seroprotection. PMID:25738167

Resonant power processors. II - Methods of control

NASA Technical Reports Server (NTRS)

Oruganti, R.; Lee, F. C.

1984-01-01

The nature of resonant converter control is discussed. Employing the state-portrait, different control methods for series resonant converter are identified and their performance evaluated based on their stability, response to control and load changes and range of operation. A new control method, optimal-trajectory control, is proposed which, by utilizing the state trajectories as control laws, continuously monitors the energy level of the resonant tank. The method is shown to have superior control properties especially under transient operation.

Transcatheter Arterial Embolization With Spherical Embolic Agent for Pulmonary Metastases From Renal Cell Carcinoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seki, Akihiko, E-mail: sekia@igtc.jp; Hori, Shinichi, E-mail: horishin@igtc.jp; Sueyoshi, Satoru, E-mail: sueyoshis@igtc.jp

2013-12-15

Purpose: This retrospective study aimed to evaluate the safety and local efficacy of transcatheter arterial embolization (TAE) with superabsorbent polymer microspheres (SAP-MS) in patients with pulmonary metastases from renal cell carcinoma (RCC). Methods: Sixteen patients with unresectable pulmonary metastases from RCC refractory to standard therapy were enrolled to undergo TAE with the purpose of mass reduction and/or palliation. The prepared SAP-MS swell to approximately two times larger than their dry-state size (100-150 {mu}m [n = 14], 50-100 {mu}m [n = 2]). Forty-nine pulmonary nodules (lung n = 22, mediastinal lymph node n = 17, and hilar lymph node n =more » 10) were selected as target lesions for evaluation. Local tumor response was evaluated 3 months after TAE according to Response Evaluation Criteria in Solid Tumors (RECIST; version 1.1). The relationship between tumor enhancement ratio by CT during selective angiography and local tumor response was evaluated. Results: The number of TAE sessions per patient ranged from 1 to 5 (median 2.9). Embolized arteries at initial TAE were bronchial arteries in 14 patients (87.5 %) and nonbronchial systemic arteries in 11 patients (68.8 %). Nodule-based evaluation showed that 5 (10.2 %) nodules had complete response, 17 (34.7 %) had partial response, 15 (30.6 %) had stable disease, and 12 (24.5 %) had progressive disease. The response rate was significantly greater in 22 lesions that had a high tumor enhancement ratio than in 27 lesions that had a slight or moderate ratio (90.9 vs. 7.4 %, p = 0.01). Severe TAE-related adverse events did not occur. Conclusion: TAE with SAP-MS might be a well-tolerated and locally efficacious palliative option for patients with pulmonary metastases from RCC.« less

Air powder abrasive treatment as an implant surface cleaning method: a literature review.

PubMed

Tastepe, Ceylin S; van Waas, Rien; Liu, Yuelian; Wismeijer, Daniel

2012-01-01

To evaluate the air powder abrasive treatment as an implant surface cleaning method for peri-implantitis based on the existing literature. A PubMed search was conducted to find articles that reported on air powder abrasive treatment as an implant surface cleaning method for peri-implantitis. The studies evaluated cleaning efficiency and surface change as a result of the method. Furthermore, cell response toward the air powder abrasive-treated discs, reosseointegration, and clinical outcome after treatment is also reported. The PubMed search resulted in 27 articles meeting the inclusion criteria. In vitro cleaning efficiency of the method is reported to be high. The method resulted in minor surface changes on titanium specimens. Although the air powder abrasive-treated specimens showed sufficient levels of cell attachment and cell viability, the cell response decreased compared with sterile discs. Considerable reosseointegration between 39% and 46% and improved clinical parameters were reported after treatment when applied in combination with surgical treatment. The results of the treatment are influenced by the powder type used, the application time, and whether powder was applied surgically or nonsurgically. The in vivo data on air powder abrasive treatment as an implant surface cleaning method is not sufficient to draw definitive conclusions. However, in vitro results allow the clinician to consider the method as a promising option for implant surface cleaning in peri-implantitis treatment.

Evaluating color deficiency simulation and daltonization methods through visual search and sample-to-match: SaMSEM and ViSDEM

NASA Astrophysics Data System (ADS)

Simon-Liedtke, Joschua T.; Farup, Ivar; Laeng, Bruno

2015-01-01

Color deficient people might be confronted with minor difficulties when navigating through daily life, for example when reading websites or media, navigating with maps, retrieving information from public transport schedules and others. Color deficiency simulation and daltonization methods have been proposed to better understand problems of color deficient individuals and to improve color displays for their use. However, it remains unclear whether these color prosthetic" methods really work and how well they improve the performance of color deficient individuals. We introduce here two methods to evaluate color deficiency simulation and daltonization methods based on behavioral experiments that are widely used in the field of psychology. Firstly, we propose a Sample-to-Match Simulation Evaluation Method (SaMSEM); secondly, we propose a Visual Search Daltonization Evaluation Method (ViSDEM). Both methods can be used to validate and allow the generalization of the simulation and daltonization methods related to color deficiency. We showed that both the response times (RT) and the accuracy of SaMSEM can be used as an indicator of the success of color deficiency simulation methods and that performance in the ViSDEM can be used as an indicator for the efficacy of color deficiency daltonization methods. In future work, we will include comparison and analysis of different color deficiency simulation and daltonization methods with the help of SaMSEM and ViSDEM.

Using a Linear Regression Method to Detect Outliers in IRT Common Item Equating

ERIC Educational Resources Information Center

He, Yong; Cui, Zhongmin; Fang, Yu; Chen, Hanwei

2013-01-01

Common test items play an important role in equating alternate test forms under the common item nonequivalent groups design. When the item response theory (IRT) method is applied in equating, inconsistent item parameter estimates among common items can lead to large bias in equated scores. It is prudent to evaluate inconsistency in parameter…

Achieving Broad Participation in Congregational Health Surveys at African American and Latino Churches

ERIC Educational Resources Information Center

Hawes-Dawson, Jennifer; Derose, Kathryn P.; Aunon, Frances M.; Dominguez, Blanca X.; Felton, Alexandria; Mata, Michael A.; Oden, Clyde W.; Paffen, Sandra

2017-01-01

Congregation-based health program evaluations often rely on surveys, but little documentation is available regarding specific methods and challenges. Here we describe methods used to achieve acceptable response rates (73-79%) in a survey of HIV-related attitudes and behaviors in two African American and three Latino churches in high HIV-prevalence…

An Evaluation of Behavioral Health Compliance and Microbial Risk Factors on Student Populations within a High-Density Campus

ERIC Educational Resources Information Center

Decker, Jody F.; Slawson, Robin M.

2012-01-01

Objective: The aim of this Canadian study was to assess student behavioral response to disease transmission risk, while identifying high microbial deposition/transmission sites. Participants: A student survey was conducted during October 2009. Methods: The methods included a survey of students to assess use of health services, vaccination…

Assessment of Murine Retinal Function by Electroretinography

PubMed Central

Benchorin, Gillie; Calton, Melissa A.; Beaulieu, Marielle O.; Vollrath, Douglas

2017-01-01

The electroretinogram (ERG) is a sensitive and noninvasive method for testing retinal function. In this protocol, we describe a method for performing ERGs in mice. Contact lenses on the mouse cornea measure the electrical response to a light stimulus of photoreceptors and downstream retinal cells, and the collected data are analyzed to evaluate retinal function. PMID:29177186

Nondestructive testing of advanced materials using sensors with metamaterials

NASA Astrophysics Data System (ADS)

Rozina, Steigmann; Narcis Andrei, Danila; Nicoleta, Iftimie; Catalin-Andrei, Tugui; Frantisek, Novy; Stanislava, Fintova; Petrica, Vizureanu; Adriana, Savin

2016-11-01

This work presents a method for nondestructive evaluation (NDE) of advanced materials that makes use of the images in near field and the concentration of flux using the phenomenon of spatial resolution. The method allows the detection of flaws as crack, nonadhesion of coating, degradation or presence delamination stresses correlated with the response of electromagnetic sensor.

Children's Story Stem Responses: A Measure of Program Impact on Developmental Risks Associated with Dysfunctional Parenting.

ERIC Educational Resources Information Center

Robinson, JoAnn; Herot, Christine; Mantz-Simmons, Linda; Haynes, Phillip

2000-01-01

This article explores using the MacArthur Story Stem Battery to investigate the interior life of children, its potential usefulness in evaluating interventions geared to prevent dysfunctional parenting, and how the method has been adapted for use with low-income African American children. Case examples support the method's application. (Author/CR)

3D Biomimetic Platform

NASA Technical Reports Server (NTRS)

Scott Carnell, Lisa A. (Inventor)

2017-01-01

An apparatus and method that utilizes a radiation source and a simulated microgravity to provide combined stressors. The response of cells/bacteria/viruses and/or other living matter to the combined stressors can be evaluated to predict the effects of extended space missions. The apparatus and method can also be utilized to study diseases and to develop new treatments and vaccinations.

Evaluation of Commercial Cell Preparations as Sources of Calibration Standards for Real-Time qPCR Analysis of Enterococci in Recreational Waters

EPA Science Inventory

In response to the Beach Act, the U.S. EPA has developed a quantitative PCR (qPCR) method for enterococci that meets requirements for rapid, risk-based water quality assessments of recreational waters. Widespread implementation of this method will require that different laborator...

Evaluation of Hybrid Learning in a Construction Engineering Context: A Mixed-Method Approach

ERIC Educational Resources Information Center

Karabulut-Ilgu, Aliye; Jahren, Charles

2016-01-01

Engineering educators call for a widespread implementation of hybrid learning to respond to rapidly changing demands of the 21st century. In response to this call, a junior-level course in the Construction Engineering program entitled Construction Equipment and Heavy Construction Methods was converted into a hybrid learning model. The overarching…

An instructional guide for leaf color analysis using digital imaging software

Treesearch

Paula F. Murakami; Michelle R. Turner; Abby K. van den Berg; Paul G. Schaberg

2005-01-01

Digital color analysis has become an increasingly popular and cost-effective method utilized by resource managers and scientists for evaluating foliar nutrition and health in response to environmental stresses. We developed and tested a new method of digital image analysis that uses Scion Image or NIH image public domain software to quantify leaf color. This...

Students' Responses to Active Instructional Approaches in a Social Studies Methods Course.

ERIC Educational Resources Information Center

Byer, John L.

A study investigated the effects of actively involving students in a social studies methods class on instructor evaluations given by students. Subjects were 30 undergraduates who were all elementary education majors except for one special education major. Subjects (27 female and 3 male) ranged in age from 21 to 53 years old. The experimental…

Approaches to chronic disease management evaluation in use in Europe: a review of current methods and performance measures.

PubMed

Conklin, Annalijn; Nolte, Ellen; Vrijhoef, Hubertus

2013-01-01

An overview was produced of approaches currently used to evaluate chronic disease management in selected European countries. The study aims to describe the methods and metrics used in Europe as a first to help advance the methodological basis for their assessment. A common template for collection of evaluation methods and performance measures was sent to key informants in twelve European countries; responses were summarized in tables based on template evaluation categories. Extracted data were descriptively analyzed. Approaches to the evaluation of chronic disease management vary widely in objectives, designs, metrics, observation period, and data collection methods. Half of the reported studies used noncontrolled designs. The majority measure clinical process measures, patient behavior and satisfaction, cost and utilization; several also used a range of structural indicators. Effects are usually observed over 1 or 3 years on patient populations with a single, commonly prevalent, chronic disease. There is wide variation within and between European countries on approaches to evaluating chronic disease management in their objectives, designs, indicators, target audiences, and actors involved. This study is the first extensive, international overview of the area reported in the literature.

Modelling and temporal performances evaluation of networked control systems using (max, +) algebra

NASA Astrophysics Data System (ADS)

Ammour, R.; Amari, S.

2015-01-01

In this paper, we address the problem of temporal performances evaluation of producer/consumer networked control systems. The aim is to develop a formal method for evaluating the response time of this type of control systems. Our approach consists on modelling, using Petri nets classes, the behaviour of the whole architecture including the switches that support multicast communications used by this protocol. (max, +) algebra formalism is then exploited to obtain analytical formulas of the response time and the maximal and minimal bounds. The main novelty is that our approach takes into account all delays experienced at the different stages of networked automation systems. Finally, we show how to apply the obtained results through an example of networked control system.

Development of an in situ evaluation system for neural cells using extracellular matrix-modeled gel culture.

PubMed

Nagai, Takayuki; Ikegami, Yasuhiro; Mizumachi, Hideyuki; Shirakigawa, Nana; Ijima, Hiroyuki

2017-10-01

Two-dimensional monolayer culture is the most popular cell culture method. However, the cells may not respond as they do in vivo because the culture conditions are different from in vivo conditions. However, hydrogel-embedding culture, which cultures cells in a biocompatible culture substrate, can produce in vivo-like cell responses, but in situ evaluation of cells in a gel is difficult. In this study, we realized an in vivo-like environment in vitro to produce cell responses similar to those in vivo and established an in situ evaluation system for hydrogel-embedded cell responses. The extracellular matrix (ECM)-modeled gel consisted of collagen and heparin (Hep-col) to mimic an in vivo-like environment. The Hep-col gel could immobilize growth factors, which is important for ECM functions. Neural stem/progenitor cells cultured in the Hep-col gel grew and differentiated more actively than in collagen, indicating an in vivo-like environment in the Hep-col gel. Second, a thin-layered gel culture system was developed to realize in situ evaluation of the gel-embedded cells. Cells in a 200-μm-thick gel could be evaluated clearly by a phase-contrast microscope and immunofluorescence staining through reduced optical and diffusional effects. Finally, we found that the neural cells cultured in this system had synaptic connections and neuronal action potentials by immunofluorescence staining and Ca 2+ imaging. In conclusion, this culture method may be a valuable evaluation system for neurotoxicity testing. Copyright © 2017 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Nonlinear response of a harmonic diatomic molecule: Algebraic nonperturbative calculation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Recamier, Jose; Mochan, W. Luis; Maytorena, Jesus A.

2005-08-15

Even harmonic molecules display a nonlinear behavior when driven by an inhomogeneous field. We calculate the response of single harmonic molecules to a monochromatic time and space dependent electric field E(r,t) of frequency {omega} employing exact algebraic methods. We evaluate the responses at the fundamental frequency {omega} and at successive harmonics 2{omega}, 3{omega}, etc., as a function of the intensity and of the frequency of the field and compare the results with those of first and second order perturbation theory.

[Comparing the value of ecological protection in Sanjiang Plain wetland, Northeast China based on the stated preference method.

PubMed

Fan, Zi Juan; Ao, Chang Lin; Mao, Bi Qi; Chen, Hong Guang; Wang, Xu Dong

2017-02-01

Stated preference method is usually used to evaluate the non-market value of environmental goods which includes contingent valuation method (CVM) and choice experiments (CE). In this paper, stated preference method was adopted to evaluate the non-market value of Sanjiang Plain wetland. A willingness to pay (WTP) evaluation model of stated preference method was constructed based on the random utility theory. The average WTP of CVM and CE was obtained, respectively. The average WTP elicited by CE was 379 yuan per year, and the marginal WTPs of different selection properties including water conservation, wetland area, natural landscape and biodiversity were114.00, 72.55, 59.55 and 37.09 yuan per year, respectively. Meanwhile, the average WTP elicited by CVM was 134 yuan per year. The influence of factors on WTP was analyzed and reasons for protest responses were discussed. Results showed that the respondents' WTP elicited by CE was signi-ficantly higher than that by CVM, and respondents' socio-economic attitudes such as level of education and personal annual income had a significant positive impact on respondents' WTP. There were no significant difference in the reasons of protest responses between CVM and CE. Besides, respondents' multiple attributes and multiple levels analysis could be carried out by CE and the WTP of wetland's selection attributes could be calculated. Therefore, CE had the better ability of revealing respondents' preference information than CVM and its assessment results were more close to the actual value.

Innovative Techniques for Evaluating Behavioral Nutrition Interventions1234

PubMed Central

Laugero, Kevin D; Cunningham, Brian T; Lora, Karina R; Reicks, Marla

2017-01-01

Assessing outcomes and the impact from behavioral nutrition interventions has remained challenging because of the lack of methods available beyond traditional nutrition assessment tools and techniques. With the current high global obesity and related chronic disease rates, novel methods to evaluate the impact of behavioral nutrition-based interventions are much needed. The objective of this narrative review is to describe and review the current status of knowledge as it relates to 4 different innovative methods or tools to assess behavioral nutrition interventions. Methods reviewed include 1) the assessment of stress and stress responsiveness to enhance the evaluation of nutrition interventions, 2) eye-tracking technology in nutritional interventions, 3) smartphone biosensors to assess nutrition and health-related outcomes, and 4) skin carotenoid measurements to assess fruit and vegetable intake. Specifically, the novel use of functional magnetic resonance imaging, by characterizing the brain’s responsiveness to an intervention, can help researchers develop programs with greater efficacy. Similarly, if eye-tracking technology can enable researchers to get a better sense as to how participants view materials, the materials may be better tailored to create an optimal impact. The latter 2 techniques reviewed, smartphone biosensors and methods to detect skin carotenoids, can provide the research community with portable, effective, nonbiased ways to assess dietary intake and quality and more in the field. The information gained from using these types of methodologies can improve the efficacy and assessment of behavior-based nutrition interventions. PMID:28096132

Probabilistic Methods for Structural Reliability and Risk

NASA Technical Reports Server (NTRS)

Chamis, Christos C.

2010-01-01

A probabilistic method is used to evaluate the structural reliability and risk of select metallic and composite structures. The method is a multiscale, multifunctional and it is based on the most elemental level. A multifactor interaction model is used to describe the material properties which are subsequently evaluated probabilistically. The metallic structure is a two rotor aircraft engine, while the composite structures consist of laminated plies (multiscale) and the properties of each ply are the multifunctional representation. The structural component is modeled by finite element. The solution method for structural responses is obtained by an updated simulation scheme. The results show that the risk for the two rotor engine is about 0.0001 and the composite built-up structure is also 0.0001.

Probabilistic Methods for Structural Reliability and Risk

NASA Technical Reports Server (NTRS)

Chamis, Christos C.

2008-01-01

A probabilistic method is used to evaluate the structural reliability and risk of select metallic and composite structures. The method is a multiscale, multifunctional and it is based on the most elemental level. A multi-factor interaction model is used to describe the material properties which are subsequently evaluated probabilistically. The metallic structure is a two rotor aircraft engine, while the composite structures consist of laminated plies (multiscale) and the properties of each ply are the multifunctional representation. The structural component is modeled by finite element. The solution method for structural responses is obtained by an updated simulation scheme. The results show that the risk for the two rotor engine is about 0.0001 and the composite built-up structure is also 0.0001.

Preparation of anastrozole loaded PEG-PLA nanoparticles: evaluation of apoptotic response of breast cancer cell lines.

PubMed

Alyafee, Yusra A; Alaamery, Manal; Bawazeer, Shahad; Almutairi, Mansour S; Alghamdi, Badr; Alomran, Nawaf; Sheereen, Atia; Daghestani, Maha; Massadeh, Salam

2018-01-01

Anastrozole (ANS) is an aromatase inhibitor that is widely used as a treatment for breast cancer in postmenopausal women. Despite the wide use of ANS, it is associated with serious side effects due to uncontrolled delivery. In addition, ANS exhibits low solubility and short plasma half-life. Nanotechnology-based drug delivery has the potential to enhance the efficacy of drugs and overcome undesirable side effects. In this study, we aimed to prepare novel ANS-loaded PLA-PEG-PLA nanoparticles (ANS-NPs) and to compare the apoptotic response of MCF-7 cell line to both ANS and ANS-loaded NPs. ANS-NPs were synthesized using double emulsion method and characterized using different methods. The apoptotic response was evaluated by assessing cell viability, morphology, and studying changes in the expression of MAPK3 , MCL1 , and c-MYC apoptotic genes in MCF-7 cell lines. ANS was successfully encapsulated within PLA-PEG-PLA, forming monodisperse therapeutic NPs with an encapsulation efficiency of 67%, particle size of 186±27.13, and a polydispersity index of 0.26±0.11 with a sustained release profile extended over 144 hours. In addition, results for cell viability and for gene expression represent a similar apoptotic response between the free ANS and ANS-NPs. The synthesized ANS-NPs showed a similar therapeutic effect as the free ANS, which provides a rationale to pursue pre-clinical evaluation of ANS-NPs on animal models.

Non-destructive testing techniques based on nonlinear methods for assessment of debonding in single lap joints

NASA Astrophysics Data System (ADS)

Scarselli, G.; Ciampa, F.; Ginzburg, D.; Meo, M.

2015-04-01

Nonlinear ultrasonic non-destructive evaluation (NDE) methods can be used for the identification of defects within adhesive bonds as they rely on the detection of nonlinear elastic features for the evaluation of the bond strength. In this paper the nonlinear content of the structural response of a single lap joint subjected to ultrasonic harmonic excitation is both numerically and experimentally evaluated to identify and characterize the defects within the bonded region. Different metallic samples with the same geometry were experimentally tested in order to characterize the debonding between two plates by using two surface bonded piezoelectric transducers in pitch-catch mode. The dynamic response of the damaged samples acquired by the single receiver sensor showed the presence of higher harmonics (2nd and 3rd) and subharmonics of the fundamental frequencies. These nonlinear elastic phenomena are clearly due to nonlinear effects induced by the poor adhesion between the two plates. A new constitutive model aimed at representing the nonlinear material response generated by the interaction of the ultrasonic waves with the adhesive joint is also presented. Such a model is implemented in an explicit FE software and uses a nonlinear user defined traction-displacement relationship implemented by means of a cohesive material user model interface. The developed model is verified for the different geometrical and material configurations. Good agreement between the experimental and numerical nonlinear response showed that this model can be used as a simple and useful tool for understanding the quality of the adhesive joint.

Evaluating an Enrichment Program in Early Childhood: A Multi-Methods Approach

ERIC Educational Resources Information Center

van Aswegen, Christa; Pendergast, Donna

2015-01-01

This article reports on the evaluation of one topic in an enrichment program designed for children in their early years of learning. The program is responsive to an increased understanding of the benefits for very young children of programs that not only take advantage of the sensitive periods for learning but that also assist parents to a take a…

Obtaining Self-Report Data from Cognitively Impaired Elders: Methodological Issues and Clinical Implications for Nursing Home Pain Assessment

ERIC Educational Resources Information Center

Fisher, Susan E.; Burgio, Louis D.; Thorn, Beverly E.; Hardin, J. Michael

2006-01-01

Purpose: We developed and evaluated an explicit procedure for obtaining self-report pain data from nursing home residents across a broad range of cognitive status, and we evaluated the consistency, stability, and concurrent validity of resident responses. Design and Methods: Using a modification of the Geriatric Pain Measure (GPM-M2), we…

Small Groups, Big Gains: Efficacy of a Tier 2 Phonological Awareness Intervention with Preschoolers with Early Literacy Deficits

ERIC Educational Resources Information Center

Kruse, Lydia G.; Spencer, Trina D.; Olszewski, Arnold; Goldstein, Howard

2015-01-01

Purpose: The purpose of the present study was to evaluate the efficacy of a phonological awareness (PA) intervention, designed for Tier 2 instruction in a Response to Intervention (RTI) model, delivered to small groups of preschoolers. Method: A multiple-baseline design across participants was used to evaluate the efficacy of the intervention on…

Discriminate the response of Acute Myeloid Leukemia patients to treatment by using proteomics data and Answer Set Programming.

PubMed

Chebouba, Lokmane; Miannay, Bertrand; Boughaci, Dalila; Guziolowski, Carito

2018-03-08

During the last years, several approaches were applied on biomedical data to detect disease specific proteins and genes in order to better target drugs. It was shown that statistical and machine learning based methods use mainly clinical data and improve later their results by adding omics data. This work proposes a new method to discriminate the response of Acute Myeloid Leukemia (AML) patients to treatment. The proposed approach uses proteomics data and prior regulatory knowledge in the form of networks to predict cancer treatment outcomes by finding out the different Boolean networks specific to each type of response to drugs. To show its effectiveness we evaluate our method on a dataset from the DREAM 9 challenge. The results are encouraging and demonstrate the benefit of our approach to distinguish patient groups with different response to treatment. In particular each treatment response group is characterized by a predictive model in the form of a signaling Boolean network. This model describes regulatory mechanisms which are specific to each response group. The proteins in this model were selected from the complete dataset by imposing optimization constraints that maximize the difference in the logical response of the Boolean network associated to each group of patients given the omic dataset. This mechanistic and predictive model also allow us to classify new patients data into the two different patient response groups. We propose a new method to detect the most relevant proteins for understanding different patient responses upon treatments in order to better target drugs using a Prior Knowledge Network and proteomics data. The results are interesting and show the effectiveness of our method.

The extent of the uptake of plasmid into the skin determines the immune responses induced by a DNA vaccine applied topically onto the skin

PubMed Central

Yu, Zhen; Chung, Woon-Gye; Sloat, Brian R.; Löhr, Christiane V.; Weiss, Richard; Rodriguez, B. Leticia; Li, Xinran; Cui, Zhengrong

2011-01-01

Objectives Non-invasive immunization by applying plasmid DNA topically onto the skin is an attractive immunization approach. However, the immune responses induced are generally weak. Previously, we showed that the antibody responses induced by topical DNA vaccine were significantly enhanced when hair follicles in the application area were induced into anagen (growth) stage by hair plucking. In the present study, we further investigated the mechanism of immune enhancement. Methods Three different methods, hair plucking or treatment with retinoic acid (RA) or O- tetradecanoylphorbol-13-acetate (TPA), were used to induce hair follicles into anagen stage before mice were dosed with a β-galactosidase-encoding plasmid, and the specific antibody responses induced were evaluated. Key findings The hair plucking method was more effective at enhancing the resultant antibody responses. Treatment with RA or TPA caused more damages to the skin and induced more severe local inflammations than hair plucking. However, hair plucking was most effective at enhancing the uptake or retention of the DNA in the application area. Conclusions The uptake of plasmid DNA in the application area correlated with the antibody responses induced by a topically applied DNA. PMID:21235583

Random Forest Segregation of Drug Responses May Define Regions of Biological Significance.

PubMed

Bukhari, Qasim; Borsook, David; Rudin, Markus; Becerra, Lino

2016-01-01

The ability to assess brain responses in unsupervised manner based on fMRI measure has remained a challenge. Here we have applied the Random Forest (RF) method to detect differences in the pharmacological MRI (phMRI) response in rats to treatment with an analgesic drug (buprenorphine) as compared to control (saline). Three groups of animals were studied: two groups treated with different doses of the opioid buprenorphine, low (LD), and high dose (HD), and one receiving saline. PhMRI responses were evaluated in 45 brain regions and RF analysis was applied to allocate rats to the individual treatment groups. RF analysis was able to identify drug effects based on differential phMRI responses in the hippocampus, amygdala, nucleus accumbens, superior colliculus, and the lateral and posterior thalamus for drug vs. saline. These structures have high levels of mu opioid receptors. In addition these regions are involved in aversive signaling, which is inhibited by mu opioids. The results demonstrate that buprenorphine mediated phMRI responses comprise characteristic features that allow a supervised differentiation from placebo treated rats as well as the proper allocation to the respective drug dose group using the RF method, a method that has been successfully applied in clinical studies.

Method to optimize patch size based on spatial frequency response in image rendering of the light field

NASA Astrophysics Data System (ADS)

Zhang, Wei; Wang, Yanan; Zhu, Zhenhao; Su, Jinhui

2018-05-01

A focused plenoptic camera can effectively transform angular and spatial information to yield a refocused rendered image with high resolution. However, choosing a proper patch size poses a significant problem for the image-rendering algorithm. By using a spatial frequency response measurement, a method to obtain a suitable patch size is presented. By evaluating the spatial frequency response curves, the optimized patch size can be obtained quickly and easily. Moreover, the range of depth over which images can be rendered without artifacts can be estimated. Experiments show that the results of the image rendered based on frequency response measurement are in accordance with the theoretical calculation, which indicates that this is an effective way to determine the patch size. This study may provide support to light-field image rendering.

Responsiveness of two Persian-versions of shoulder outcome measures following physiotherapy intervention in patients with shoulder disorders.

PubMed

Negahban, Hossein; Behtash, Zeinab; Sohani, Soheil Mansour; Salehi, Reza

2015-01-01

To identify the ability of the Persian-version of the Shoulder Pain and Disability Index (SPADI) and the Disabilities of the Arm, Shoulder, and Hand (DASH) to detect changes in shoulder function following physiotherapy intervention (i.e. responsiveness) and to determine the change score that indicates a meaningful change in functional ability of the patient (i.e. Minimally Clinically Important Difference (MCID)). A convenient sample of 200 Persian-speaking patients with shoulder disorders completed the SPADI and the DASH at baseline and then again 4 weeks after physiotherapy intervention. Furthermore, patients were asked to rate their global rating of shoulder function at follow-up. The responsiveness was evaluated using two methods: the receiver operating characteristics (ROC) method and the correlation analysis. Two useful statistics extracted from the ROC method are the area under curve (AUC) and the optimal cutoff point called as MCID. Both the SPADI and the DASH showed the AUC of greater than 0.70 (AUC ranges = 0.77-0.82). The best cutoff points (or change scores) for the SPADI-total, SPADI-pain, SPADI-disability and the DASH were 14.88, 26.36, 23.86, and 25.41, respectively. Additionally, moderate to good correlations (Gamma = -0.51 to -0.58) were found between the changes in SPADI/DASH and changes in global rating scale. The Persian SPADI and DASH have adequate responsiveness to clinical changes in patients with shoulder disorders. Moreover, the MCIDs obtained in this study will help the clinicians and researchers to determine if a Persian-speaking patient with shoulder disorder has experienced a true change following a physiotherapy intervention. Implications for Rehabilitation Responsiveness was evaluated using two methods; the receiver operating characteristics (ROC) method and the correlation analysis. The Persian SPADI and DASH can be used as two responsive instruments in both clinical practice and research settings. The MCIDs of 14.88 and 25.41 points obtained for the SPADI-total and DASH indicated that the change scores of at least 14.88 points on the SPADI-total and 25.41 points on the DASH is necessary to certain that a true change has occurred following a physiotherapy intervention.

Recommendations for Modeling Disaster Responses in Public Health and Medicine: A Position Paper of The Society for Medical Decision Making

PubMed Central

Brandeau, Margaret L.; McCoy, Jessica H.; Hupert, Nathaniel; Holty, Jon-Erik; Bravata, Dena M.

2013-01-01

Purpose Mathematical and simulation models are increasingly used to plan for and evaluate health sector responses to disasters, yet no clear consensus exists regarding best practices for the design, conduct, and reporting of such models. We examined a large selection of published health sector disaster response models to generate a set of best practice guidelines for such models. Methods We reviewed a spectrum of published disaster response models addressing public health or healthcare delivery, focusing in particular on the type of disaster and response decisions considered, decision makers targeted, choice of outcomes evaluated, modeling methodology, and reporting format. We developed initial recommendations for best practices for creating and reporting such models and refined these guidelines after soliciting feedback from response modeling experts and from members of the Society for Medical Decision Making. Results We propose six recommendations for model construction and reporting, inspired by the most exemplary models: Health sector disaster response models should address real-world problems; be designed for maximum usability by response planners; strike the appropriate balance between simplicity and complexity; include appropriate outcomes, which extend beyond those considered in traditional cost-effectiveness analyses; and be designed to evaluate the many uncertainties inherent in disaster response. Finally, good model reporting is particularly critical for disaster response models. Conclusions Quantitative models are critical tools for planning effective health sector responses to disasters. The recommendations we propose can increase the applicability and interpretability of future models, thereby improving strategic, tactical, and operational aspects of preparedness planning and response. PMID:19605887

Evaluation of standardized sample collection, packaging, and ...

EPA Pesticide Factsheets

Journal Sample collection procedures and primary receptacle (sample container and bag) decontamination methods should prevent contaminant transfer between contaminated and non-contaminated surfaces and areas during bio-incident operations. Cross-contamination of personnel, equipment, or sample containers may result in the exfiltration of biological agent from the exclusion (hot) zone and have unintended negative consequences on response resources, activities and outcomes. The current study was designed to: (1) evaluate currently recommended sample collection and packaging procedures to identify procedural steps that may increase the likelihood of spore exfiltration or contaminant transfer; (2) evaluate the efficacy of currently recommended primary receptacle decontamination procedures; and (3) evaluate the efficacy of outer packaging decontamination methods. Wet- and dry-deposited fluorescent tracer powder was used in contaminant transfer tests to qualitatively evaluate the currently-recommended sample collection procedures. Bacillus atrophaeus spores, a surrogate for Bacillus anthracis, were used to evaluate the efficacy of spray- and wipe-based decontamination procedures.

Early Effects of Responsivity Education/Prelinguistic Milieu Teaching for Children with Developmental Delays and Their Parents

ERIC Educational Resources Information Center

Fey, Marc E.; Warren, Steven F.; Brady, Nancy; Finestack, Lizbeth H.; Bredin-Oja, Shelley L.; Fairchild, Martha; Sokol, Shari; Yoder, Paul J.

2006-01-01

Purpose: To evaluate the efficacy of a 6-month course of responsivity education/prelinguistic milieu teaching (RE/PMT) for children with developmental delay and RE/PMT's effects on parenting stress in a randomized clinical trial. Method: Fifty-one children, age 24-33 months, with no more than 10 expressive words or signs, were randomly assigned to…

Poor Response Inhibition as a Predictor of Problem Drinking and Illicit Drug Use in Adolescents at Risk for Alcoholism and Other Substance Use Disorders

ERIC Educational Resources Information Center

Nigg, Joel T.; Wong, Maria M.; Martel, Michelle M.; Jester, Jennifer M.; Puttler, Leon I.; Glass, Jennifer M.; Adams, Kenneth M.; Fitzgerald, Hiram E.; Zucker, Robert A.

2006-01-01

Objective: To evaluate the predictive power of executive functions, in particular, response inhibition, in relation to alcohol-related problems and illicit drug use in adolescence. Method: A total of 498 children from 275 families from a longitudinal high-risk study completed executive function measures in early and late adolescence and lifetime…

Response to Intervention (RTI): A Mixed Methods Study Evaluating the Effects of Behavior Training Software on Behavior of In-School Suspension Students

ERIC Educational Resources Information Center

Cooper, Rosie Nicole

2014-01-01

Excessive classroom disruption is prevalent among today's public high schools and is a deterrent to the academic and social achievements of students. Using Response to Intervention (RtI) to equip in-school suspension (ISS) programs with a research-based behavioral curriculum is one possible solution to efficiently and cost-effectively remediating…

Investigations in site response from ground motion observations in vertical arrays

NASA Astrophysics Data System (ADS)

Baise, Laurie Gaskins

The aim of the research is to improve the understanding of earthquake site response and to improve the techniques available to investigate issues in this field. Vertical array ground motion data paired with the empirical transfer function (ETF) methodology is shown to accurately characterize site response. This manuscript draws on methods developed in the field of signal processing and statistical time series analysis to parameterize the ETF as an autoregressive moving-average (ARMA) system which is justified theoretically, historically, and by example. Site response is evaluated at six sites in California, Japan, and Taiwan using ETF estimates, correlation analysis, and full waveform modeling. Correlation analysis is proposed as a required data quality evaluation imperative to any subsequent site response analysis. ETF estimates and waveform modeling are used to decipher the site response at sites with simple and complex geologic structure, which provide simple time-invariant and time-variant methods for evaluating both linear site transfer functions and nonlinear site response for sites experiencing liquefaction of the soils. The Treasure and Yerba Buena Island sites, however, require 2-D waveform modeling to accurately evaluate the effects of the shallow sedimentary basin. ETFs are used to characterize the Port Island site and corresponding shake table tests before, during, and after liquefaction. ETFs derived from the shake table tests were demonstrated to consistently predict the linear field ground response below 16 m depth and the liquefied behavior above 15 m depth. The liquefied interval response was demonstrated to gradually return to pre-liquefied conditions within several weeks of the 1995 Hyogo-ken Nanbu earthquake. Both the site's and the shake table test's response were shown to be effectively linear up to 0.5 g in the native materials below 16 m depth. The effective linearity of the site response at GVDA, Chiba, and Lotting up to 0.1 g, 0.33 g, and 0.49 g, respectively, further confirms that site response in the field may be more linear than expected from laboratory tests. Strong motions were predicted at these sites with normalized mean square error less than 0.10 using ETFs generated from weak motions. The Treasure Island site response was shown to be dominated by surface waves propagating in the shallow sediments of the San Francisco Bay. Low correlation of the ground motions recorded on rock at Yerba Buena Island and in rock beneath the Treasure Island site intimates that the Yerba Buena site is an inappropriate reference site for Treasure Island site response studies. Accurate simulation of the Treasure Island site response was achieved using a 2-D velocity structure comprised of a 100 m uniform soil basin (Vs = 400 m/s) over a weathered rock veneer (Vs = 1.5 km/s) to 200 m depth.

Initial clinical outcomes of proton beam radiotherapy for hepatocellular carcinoma

PubMed Central

Yu, Jeong Il; Yoo, Gyu Sang; Cho, Sungkoo; Jung, Sang Hoon; Han, Youngyih; Park, Seyjoon; Lee, Boram; Kang, Wonseok; Sinn, Dong Hyun; Paik, Yong-Han; Gwak, Geum-Youn; Choi, Moon Seok; Lee, Joon Hyeok; Koh, Kwang Cheol; Paik, Seung Woon; Park, Hee Chul

2018-01-01

Purpose This study aimed to evaluate the initial outcomes of proton beam therapy (PBT) for hepatocellular carcinoma (HCC) in terms of tumor response and safety. Materials and Methods HCC patients who were not indicated for standard curative local modalities and who were treated with PBT at Samsung Medical Center from January 2016 to February 2017 were enrolled. Toxicity was scored using the Common Terminology Criteria for Adverse Events (CTCAE) version 4.0. Tumor response was evaluated using modified Response Evaluation Criteria in Solid Tumors (mRECIST). Results A total of 101 HCC patients treated with PBT were included. Patients were treated with an equivalent dose of 62–92 GyE10. Liver function status was not significantly affected after PBT. Greater than 80% of patients had Child-Pugh class A and albumin-bilirubin (ALBI) grade 1 up to 3-months after PBT. Of 78 patients followed for three months after PBT, infield complete and partial responses were achieved in 54 (69.2%) and 14 (17.9%) patients, respectively. Conclusion PBT treatment of HCC patients showed a favorable infield complete response rate of 69.2% with acceptable acute toxicity. An additional follow-up study of these patients will be conducted. PMID:29580046

Audiological characteristics of infants with abnormal transient evoked otoacoustic emission and normal auditory brainstem response.

PubMed

Huang, Lihui; Han, Demin; Guo, Ying; Liu, Sha; Cui, Xiaoyan; Mo, Lingyan; Qi, Beier; Cai, Zhenghua; Liu, Hui; En, Hui; Guo, Liansheng

2008-10-01

Audiological characteristics were investigated in 81 ears of 53 infants with abnormal transient evoked otoacoustic emission (TEOAE) and normal auditory brainstem response (ABR). The relationship between ABR and other hearing testing methods, including 40Hz auditory event-related potential (40Hz-AERP), auditory steady state response (ASSR), distortion product otoacoustic emission (DPOAE), tympanometry, and acoustic reflex, was analyzed. Of the 81 ears, 18 ears (22.2%) were normal, while 63 ears (77.8%) were abnormal according to the tests. Testing of the 40 Hz AERP (36 ears) and ASSR (45 ears) revealed that 14 ears (38.9%) and 27 ears (60.0%) were abnormal, respectively. Testing of DPOAE in 68 ears revealed that 50 ears (73.5%) were abnormal. Testing of tympanometry in 50 ears and acoustic reflex in 47 ears revealed that 9 ears (18%) and 27 ears (57.4%) were abnormal, respectively. The present data suggests that the hearing of infants cannot be sufficiently evaluated with ABR only and that it must be evaluated with integrative audiological testing methods.

A preliminary study of the thermal measurement with nMAG gel dosimeter by MRI

NASA Astrophysics Data System (ADS)

Chuang, Chun-Chao; Shao, Chia-Ho; Shih, Cheng-Ting; Yeh, Yu-Chen; Lu, Cheng-Chang; Chuang, Keh-Shih; Wu, Jay

2014-11-01

The methacrylic acid (nMAG) gel dosimeter is an effective tool for 3-dimensional quality assurance of radiation therapy. In addition to radiation induced polymerization effects, the nMAG gel also responds to temperature variation. In this study, we proposed a new method to evaluate the thermal response in thermal therapy using nMAG gel and magnetic resonance image (MRI) scans. Several properties of nMAG have been investigated including the R2 relaxation rate, temperature sensitivity, and temperature linearity of the thermal dose response. nMAG was heated by the double-boiling method in the range of 37-45 °C. MRI scans were performed with the head coil receiver. The temperature to R2 response curve was analyzed and simple linear regression was performed with an R-square value of 0.9835. The measured data showed a well inverse linear relationship between R2 and temperature. We conclude that the nMAG polymer gel dosimeter shows great potential as a technique to evaluate the temperature rise during thermal surgery.

Item Response Theory and Health Outcomes Measurement in the 21st Century

PubMed Central

Hays, Ron D.; Morales, Leo S.; Reise, Steve P.

2006-01-01

Item response theory (IRT) has a number of potential advantages over classical test theory in assessing self-reported health outcomes. IRT models yield invariant item and latent trait estimates (within a linear transformation), standard errors conditional on trait level, and trait estimates anchored to item content. IRT also facilitates evaluation of differential item functioning, inclusion of items with different response formats in the same scale, and assessment of person fit and is ideally suited for implementing computer adaptive testing. Finally, IRT methods can be helpful in developing better health outcome measures and in assessing change over time. These issues are reviewed, along with a discussion of some of the methodological and practical challenges in applying IRT methods. PMID:10982088

Text Messaging Data Collection for Monitoring an Infant Feeding Intervention Program in Rural China: Feasibility Study

PubMed Central

van Velthoven, Michelle Helena; Chen, Li; Car, Josip; Rudan, Igor; Wu, Qiong; Du, Xiaozhen; Scherpbier, Robert W

2013-01-01

Background An effective data collection method is crucial for high quality monitoring of health interventions. The traditional face-to-face data collection method is labor intensive, expensive, and time consuming. With the rapid increase of mobile phone subscribers, text messaging has the potential to be used for evaluation of population health interventions in rural China. Objective The objective of this study was to explore the feasibility of using text messaging as a data collection tool to monitor an infant feeding intervention program. Methods Participants were caregivers of children aged 0 to 23 months in rural China who participated in an infant feeding health education program. We used the test-retest method. First, we collected data with a text messaging survey and then with a face-to-face survey for 2 periods of 3 days. We compared the response rate, data agreement, costs, and participants’ acceptability of the two methods. Also, we interviewed participants to explore their reasons for not responding to the text messages and the reasons for disagreement in the two methods. In addition, we evaluated the most appropriate time during the day for sending text messages. Results We included 258 participants; 99 (38.4%) participated in the text messaging survey and 177 (68.6%) in the face-to-face survey. Compared with the face-to-face survey, the text messaging survey had much lower response rates to at least one question (38.4% vs 68.6%) and to all 7 questions (27.9% vs 67.4%) with moderate data agreement (most kappa values between .5 and .75, the intraclass correlation coefficients between .53 to .72). Participants who took part in both surveys gave the same acceptability rating for both methods (median 4.0 for both on a 5-point scale, 1=disliked very much and 5=liked very much). The costs per questionnaire for the text messaging method were much lower than the costs for the face-to-face method: ¥19.7 (US $3.13) versus ¥33.9 (US $5.39) for all questionnaires, and ¥27.1 (US $4.31) versus ¥34.4 (US $5.47) for completed questionnaires. The main reasons for not replying were that participants did not receive text messages, they were too busy to reply, or they did not see text messages in time. The main reasons for disagreement in responses were that participants forgot their answers in the text messaging survey and that they changed their minds. We found that participants were more likely to reply to text messages immediately during 2 time periods: 8 AM to 3 PM and 8 PM to 9 PM. Conclusions The text messaging method had reasonable data agreement and low cost, but a low response rate. Further research is needed to evaluate effectiveness of measures that can increase the response rate, especially in collecting longitudinal data by text messaging. PMID:24305514

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Xiao; Gao, Wenzhong; Wang, Jianhui

To release the 'hidden inertia' of variable-speed wind turbines for temporary frequency support, a method of torque-limit based inertial control is proposed in this paper. This method aims to improve the frequency support capability considering the maximum torque restriction of a permanent magnet synchronous generator. The advantages of the proposed method are improved frequency nadir (FN) in the event of an under-frequency disturbance; and avoidance of over-deceleration and a second frequency dip during the inertial response. The system frequency response is different, with different slope values in the power-speed plane when the inertial response is performed. The proposed method ismore » evaluated in a modified three-machine, nine-bus system. The simulation results show that there is a trade-off between the recovery time and FN, such that a gradual slope tends to improve the FN and restrict the rate of change of frequency aggressively while causing an extension of the recovery time. These results provide insight into how to properly design such kinds of inertial control strategies for practical applications.« less

Blood pressure evaluation using sphygmomanometry assisted by arterial pulse waveform detection by fiber Bragg grating pulse device

NASA Astrophysics Data System (ADS)

Sharath, Umesh; Sukreet, Raju; Apoorva, Girish; Asokan, Sundarrajan

2013-06-01

We report a blood pressure evaluation methodology by recording the radial arterial pulse waveform in real time using a fiber Bragg grating pulse device (FBGPD). Here, the pressure responses of the arterial pulse in the form of beat-to-beat pulse amplitude and arterial diametrical variations are monitored. Particularly, the unique signatures of pulse pressure variations have been recorded in the arterial pulse waveform, which indicate the systolic and diastolic blood pressure while the patient is subjected to the sphygmomanometric blood pressure examination. The proposed method of blood pressure evaluation using FBGPD has been validated with the auscultatory method of detecting the acoustic pulses (Korotkoff sounds) by an electronic stethoscope.

Dynamic simulation of perturbation responses in a closed-loop virtual arm model.

PubMed

Du, Yu-Fan; He, Xin; Lan, Ning

2010-01-01

A closed-loop virtual arm (VA) model has been developed in SIMULINK environment by adding spinal reflex circuits and propriospinal neural networks to the open-loop VA model developed in early study [1]. An improved virtual muscle model (VM4.0) is used to speed up simulation and to generate more precise recruitment of muscle force at low levels of muscle activation. Time delays in the reflex loops are determined by their synaptic connections and afferent transmission back to the spinal cord. Reflex gains are properly selected so that closed-loop responses are stable. With the closed-loop VA model, we are developing an approach to evaluate system behaviors by dynamic simulation of perturbation responses. Joint stiffness is calculated based on simulated perturbation responses by a least-squares algorithm in MATLAB. This method of dynamic simulation will be essential for further evaluation of feedforward and reflex control of arm movement and position.

Pharmacogenetics of ustekinumab in patients with moderate-to-severe plaque psoriasis.

PubMed

Prieto-Pérez, Rocío; Llamas-Velasco, Mar; Cabaleiro, Teresa; Solano-López, Guillermo; Márquez, Beatriz; Román, Manuel; Ochoa, Dolores; Talegón, María; Daudén, Esteban; Abad-Santos, Francisco

2017-01-01

Aim/Materials & methods: Few studies have evaluated the influence of pharmacogenetics in psoriatic patients treated with ustekinumab. We evaluated 121 polymorphisms to study a possible association between these SNPs and the response to ustekinumab (PASI75 at 4 months; n = 69). The adjusted results (false discovery rate) showed an association between five SNPs in TNFRSF1A, HTR2A, NFKBIA, ADAM33 and IL13 genes, and poor response to ustekinumab. Furthermore, six SNPs in CHUK, C17orf51, ZNF816A, STAT4, SLC22A4 and Corf72 genes were associated with better response to ustekinumab. However, there was no significant association between response to ustekinumab and SNPs in HLA-C as it has been recently described. Finally, a higher weight was obtained in nonresponders than responders (p = 0.018). Further studies would be necessary to be closer to personalized medicine.

Evaluation of nanoparticle immunotoxicity

NASA Astrophysics Data System (ADS)

Dobrovolskaia, Marina A.; Germolec, Dori R.; Weaver, James L.

2009-07-01

The pharmaceutical industry is developing increasing numbers of drugs and diagnostics based on nanoparticles, and evaluating the immune response to these diverse formulations has become a challenge for scientists and regulatory agencies alike. An international panel of scientists and representatives from various agencies and companies reviewed the imitations of current tests at a workshop held at the National Cancer Institute in Frederick, Maryland. This article outlines practical strategies for identifying and controlling interferences in common evaluation methods and the implications for regulation.

Semi-active tuned liquid column damper implementation with real-time hybrid simulations

NASA Astrophysics Data System (ADS)

Riascos, Carlos; Marulanda Casas, Johannio; Thomson, Peter

2016-04-01

Real-time hybrid simulation (RTHS) is a modern cyber-physical technique used for the experimental evaluation of complex systems, that treats the system components with predictable behavior as a numerical substructure and the components that are difficult to model as an experimental substructure. Therefore it is an attractive method for evaluation of the response of civil structures under earthquake, wind and anthropic loads. In this paper, the response of three-story shear frame controlled by a tuned liquid column damper (TLCD) and subject to base excitation is considered. Both passive and semi-active control strategies were implemented and are compared. While the passive TLCD achieved a reduction of 50% in the acceleration response of the main structure in comparison with the structure without control, the semi-active TLCD achieved a reduction of 70%, and was robust to variations in the dynamic properties of the main structure. In addition, a RTHS was implemented with the main structure modeled as a linear, time-invariant (LTI) system through a state space representation and the TLCD, with both control strategies, was evaluated on a shake table that reproduced the displacement of the virtual structure. Current assessment measures for RTHS were used to quantify the performance with parameters such as generalized amplitude, equivalent time delay between the target and measured displacement of the shake table, and energy error using the measured force, and prove that the RTHS described in this paper is an accurate method for the experimental evaluation of structural control systems.

Evaluation of seismic performance of reinforced concrete (RC) buildings under near-field earthquakes

NASA Astrophysics Data System (ADS)

Moniri, Hassan

2017-03-01

Near-field ground motions are significantly severely affected on seismic response of structure compared with far-field ground motions, and the reason is that the near-source forward directivity ground motions contain pulse-long periods. Therefore, the cumulative effects of far-fault records are minor. The damage and collapse of engineering structures observed in the last decades' earthquakes show the potential of damage in existing structures under near-field ground motions. One important subject studied by earthquake engineers as part of a performance-based approach is the determination of demand and collapse capacity under near-field earthquake. Different methods for evaluating seismic structural performance have been suggested along with and as part of the development of performance-based earthquake engineering. This study investigated the results of illustrious characteristics of near-fault ground motions on the seismic response of reinforced concrete (RC) structures, by the use of Incremental Nonlinear Dynamic Analysis (IDA) method. Due to the fact that various ground motions result in different intensity-versus-response plots, this analysis is done again under various ground motions in order to achieve significant statistical averages. The OpenSees software was used to conduct nonlinear structural evaluations. Numerical modelling showed that near-source outcomes cause most of the seismic energy from the rupture to arrive in a single coherent long-period pulse of motion and permanent ground displacements. Finally, a vulnerability of RC building can be evaluated against pulse-like near-fault ground motions effects.

[Research Progress and Prospect of Applications of Finite Element Method in Lumbar Spine Biomechanics].

PubMed

Zhang, Zhenjun; Li, Yang; Liao, Zhenhua; Liu, Weiqiang

2016-12-01

Based on the application of finite element analysis in spine biomechanics,the research progress of finite element method applied in lumbar spine mechanics is reviewed and the prospect is forecasted.The related works,including lumbar ontology modeling,clinical application research,and occupational injury and protection,are summarized.The main research areas of finite element method are as follows:new accurate modeling process,the optimized simulation method,diversified clinical effect evaluation,and the clinical application of artificial lumbar disc.According to the recent research progress,the application prospects of finite element method,such as automation and individuation of modeling process,evaluation and analysis of new operation methods and simulation of mechanical damage and dynamic response,are discussed.The purpose of this paper is to provide the theoretical reference and practical guidance for the clinical lumbar problems by reviewing the application of finite element method in the field of the lumbar spine biomechanics.

Developing a framework for evaluating tallgrass prairie reconstruction methods and management

USGS Publications Warehouse

Larson, Diane L.; Ahlering, Marissa; Drobney, Pauline; Esser, Rebecca; Larson, Jennifer L.; Viste-Sparkman, Karen

2018-01-01

The thousands of hectares of prairie reconstructed each year in the tallgrass prairie biome can provide a valuable resource for evaluation of seed mixes, planting methods, and post-planting management if methods used and resulting characteristics of the prairies are recorded and compiled in a publicly accessible database. The objective of this study was to evaluate the use of such data to understand the outcomes of reconstructions over a 10-year period at two U.S. Fish and Wildlife Service refuges. Variables included number of species planted, seed source (combine-harvest or combine-harvest plus hand-collected), fire history, and planting method and season. In 2015 we surveyed vegetation on 81 reconstructions and calculated proportion of planted species observed; introduced species richness; native species richness, evenness and diversity; and mean coefficient of conservatism. We conducted exploratory analyses to learn how implied communities based on seed mix compared with observed vegetation; which seeding or management variables were influential in the outcome of the reconstructions; and consistency of responses between the two refuges. Insights from this analysis include: 1) proportion of planted species observed in 2015 declined as planted richness increased, but lack of data on seeding rate per species limited conclusions about value of added species; 2) differing responses to seeding and management between the two refuges suggest the importance of geographic variability that could be addressed using a public database; and 3) variables such as fire history are difficult to quantify consistently and should be carefully evaluated in the context of a public data repository.

Electroconvulsive therapy in pregnant patients.

PubMed

Bulbul, Feridun; Copoglu, Umit Sertan; Alpak, Gokay; Unal, Ahmet; Demir, Bahadır; Tastan, Mehmet Fatih; Savas, Haluk A

2013-01-01

In this study, the aim was to evaluate the clinical characteristics of patients that received electroconvulsive therapy (ECT) during pregnancy due to psychiatric disorders, evaluate the safety and efficacy of ECT in pregnant women, and evaluate the overall status of mothers and babies during the postpartum period. The study included 33 patients who were admitted as inpatients with the indication of ECT due to pregnancy and concurrent psychiatric disorders. Upon ECT administration, a complete response to treatment was seen in 84.21% of patients with major depression (n=16), a partial response to treatment in 15.78% of patients (n=3), a complete response to treatment in 91.66% of patients with bipolar disorder (n=11), a partial response to treatment in 8.33% of the patients(n=1), and a full response to treatment in 50% of patients with schizophrenia (n=1) and a partial response to treatment in 50% of patients with schizophrenia (n=1) were obtained. We had after birth information of 27 infants from total 33. It was learned that two of them had disease, one was stillbirth and 24 of them did not have any health problems. ECT administration during pregnancy to treat psychiatric disorders was found to be an effective treatment method. No risk of preterm birth in mothers treated with ECT during pregnancy was detected. © 2013.

Subjective Responses to Oral Tobacco Products: Scale Validation

PubMed Central

2013-01-01

Introduction: Several noncombusted oral tobacco products have been introduced that are primarily marketed to cigarette smokers. An important component of evaluating these products involves assessment of subjective responses to the product. To date, few studies have been undertaken to examine the validity of subjective response questionnaires for oral tobacco products. The goal of this study is to examine the extent subjective responses to a product are related to product preference and extent of product use. Methods: Data from a study examining oral tobacco product preference were used. Smokers were asked to sample a variety of oral tobacco products that differed in formulation (snus versus dissolvables) and dose of nicotine. At the end of the sampling period, subjects were asked to choose the product that they would use to completely substitute for cigarettes for the next 2 weeks. During the sampling period, subjects completed a Product Evaluation Scale (PES) that describes subjective responses to the product. During the treatment phase, they kept record of amount of product use. Results: Subjective responses to the product on the PES were related to product choice and to some extent, the amount of product use. Product choice was associated with different characteristics of the product and smoker needs. Conclusion: The PES may be a useful tool for the evaluation or oral tobacco products. PMID:23239843

Assessing secondary science students' knowledge of molecule movement, concentration gradients, and equilibrium through multiple contexts

NASA Astrophysics Data System (ADS)

Raven, Sara

2015-09-01

Background: Studies have shown that students' knowledge of osmosis and diffusion and the concepts associated with these processes is often inaccurate. This is important to address, as these concepts not only provide the foundation for more advanced topics in biology and chemistry, but are also threaded throughout both state and national science standards. Purpose: In this study, designed to determine the completeness and accuracy of three specific students' knowledge of molecule movement, concentration gradients, and equilibrium, I sought to address the following question: Using multiple evaluative methods, how can students' knowledge of molecule movement, concentration gradients, and equilibrium be characterized? Sample: This study focuses on data gathered from three students - Emma, Henry, and Riley - all of whom were gifted/honors ninth-grade biology students at a suburban high school in the southeast United States. Design and Methods: Using various qualitative data analysis techniques, I analyzed multiple sources of data from the three students, including multiple-choice test results, written free-response answers, think-aloud interview responses, and student drawings. Results: Results of the analysis showed that students maintained misconceptions about molecule movement, concentration gradients, and equilibrium. The conceptual knowledge students demonstrated differed depending on the assessment method, with the most distinct differences appearing on the multiple-choice versus the free-response questions, and in verbal versus written formats. Conclusions: Multiple levels of assessment may be required to obtain an accurate picture of content knowledge, as free-response and illustrative tasks made it difficult for students to conceal any misconceptions. Using a variety of assessment methods within a section of the curriculum can arguably help to provide a deeper understanding of student knowledge and learning, as well as illuminate misconceptions that may have remained unknown if only one assessment method was used. Furthermore, beyond simply evaluating past learning, multiple assessment methods may aid in student comprehension of key concepts.

Waveforms and Sonic Boom Perception and Response (WSPR): Low-Boom Community Response Program Pilot Test Design, Execution, and Analysis

NASA Technical Reports Server (NTRS)

Page, Juliet A.; Hodgdon, Kathleen K.; Krecker, Peg; Cowart, Robbie; Hobbs, Chris; Wilmer, Clif; Koening, Carrie; Holmes, Theresa; Gaugler, Trent; Shumway, Durland L.;

Psychometric properties of startle and corrugator response in NPU, Affective Picture Viewing, and Resting State tasks

PubMed Central

Kaye, Jesse T.; Bradford, Daniel E.; Curtin, John J.

2016-01-01

The current study provides a comprehensive evaluation of critical psychometric properties of commonly used psychophysiology laboratory tasks/measures within the NIMH RDoC. Participants (N = 128) completed the No Shock, Predictable Shock, Unpredictable Shock (NPU) task, Affective Picture Viewing task, and Resting State task at two study visits separated by one week. We examined potentiation/modulation scores in NPU (predictable or unpredictable shock vs. no shock) and Affective Picture Viewing tasks (pleasant or unpleasant vs. neutral pictures) for startle and corrugator responses with two commonly used quantification methods. We quantified startle potentiation/modulation scores with raw and standardized responses. We quantified corrugator potentiation/modulation in the time and frequency domains. We quantified general startle reactivity in the Resting State Task as the mean raw startle response during the task. For these three tasks, two measures, and two quantification methods we evaluated effect size robustness and stability, internal consistency (i.e., split-half reliability), and one-week temporal stability. The psychometric properties of startle potentiation in the NPU task were good but concerns were noted for corrugator potentiation in this task. Some concerns also were noted for the psychometric properties of both startle and corrugator modulation in the Affective Picture Viewing task, in particular for pleasant picture modulation. Psychometric properties of general startle reactivity in the Resting State task were good. Some salient differences in the psychometric properties of the NPU and Affective Picture Viewing tasks were observed within and across quantification methods. PMID:27167717

Metabolic impact of partial volume correction of [18F]FDG PET-CT oncological studies on the assessment of tumor response to treatment.

PubMed

Stefano, A; Gallivanone, F; Messa, C; Gilardi, M C; Gastiglioni, I

2014-12-01

The aim of this work is to evaluate the metabolic impact of Partial Volume Correction (PVC) on the measurement of the Standard Uptake Value (SUV) from [18F]FDG PET-CT oncological studies for treatment monitoring purpose. Twenty-nine breast cancer patients with bone lesions (42 lesions in total) underwent [18F]FDG PET-CT studies after surgical resection of breast cancer primitives, and before (PET-II) chemotherapy and hormone treatment. PVC of bone lesion uptake was performed on the two [18F]FDG PET-CT studies, using a method based on Recovery Coefficients (RC) and on an automatic measurement of lesion metabolic volume. Body-weight average SUV was calculated for each lesion, with and without PVC. The accuracy, reproducibility, clinical feasibility and the metabolic impact on treatment response of the considered PVC method was evaluated. The PVC method was found clinically feasible in bone lesions, with an accuracy of 93% for lesion sphere-equivalent diameter >1 cm. Applying PVC, average SUV values increased, from 7% up to 154% considering both PET-I and PET-II studies, proving the need of the correction. As main finding, PVC modified the therapy response classification in 6 cases according to EORTC 1999 classification and in 5 cases according to PERCIST 1.0 classification. PVC has an important metabolic impact on the assessment of tumor response to treatment by [18F]FDG PET-CT oncological studies.

Economic Valuation of Health Care Services in Public Health Systems: A Study about Willingness to Pay (WTP) for Nursing Consultations

PubMed Central

Martín-Fernández, Jesús; del Cura-González, Mª Isabel; Rodríguez-Martínez, Gemma; Ariza-Cardiel, Gloria; Zamora, Javier; Gómez-Gascón, Tomás; Polentinos-Castro, Elena; Pérez-Rivas, Francisco Javier; Domínguez-Bidagor, Julia; Beamud-Lagos, Milagros; Tello-Bernabé, Mª Eugenia; Conde-López, Juan Francisco; Aguado-Arroyo, Óscar; Bayona, Mª Teresa Sanz-; Gil-Lacruz, Ana Isabel

2013-01-01

Background Identifying the economic value assigned by users to a particular health service is of principal interest in planning the service. The aim of this study was to evaluate the perception of economic value of nursing consultation in primary care (PC) by its users. Methods and Results Economic study using contingent valuation methodology. A total of 662 users of nursing consultation from 23 health centers were included. Data on demographic and socioeconomic characteristics, health needs, pattern of usage, and satisfaction with provided service were compiled. The validity of the response was evaluated by an explanatory mixed-effects multilevel model in order to assess the factors associated with the response according to the welfare theory. Response reliability was also evaluated. Subjects included in the study indicated an average Willingness to Pay (WTP) of €14.4 (CI 95%: €13.2–15.5; median €10) and an average Willingness to Accept [Compensation] (WTA) of €20.9 (CI 95%: €19.6–22.2; median €20). Average area income, personal income, consultation duration, home visit, and education level correlated with greater WTP. Women and older subjects showed lower WTP. Fixed parameters explained 8.41% of the residual variability, and response clustering in different health centers explained 4–6% of the total variability. The influence of income on WTP was different in each center. The responses for WTP and WTA in a subgroup of subjects were consistent when reassessed after 2 weeks (intraclass correlation coefficients 0.952 and 0.893, respectively). Conclusions The economic value of nursing services provided within PC in a public health system is clearly perceived by its user. The perception of this value is influenced by socioeconomic and demographic characteristics of the subjects and their environment, and by the unique characteristics of the evaluated service. The method of contingent valuation is useful for making explicit this perception of value of health services. PMID:23626858

System and method for identifying, reporting, and evaluating presence of substance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Maurice; Lusby, Michael; Van Hook, Arthur

A system and method for identifying, reporting, and evaluating a presence of a solid, liquid, gas, or other substance of interest, particularly a dangerous, hazardous, or otherwise threatening chemical, biological, or radioactive substance. The system comprises one or more substantially automated, location self-aware remote sensing units; a control unit; and one or more data processing and storage servers. Data is collected by the remote sensing units and transmitted to the control unit; the control unit generates and uploads a report incorporating the data to the servers; and thereafter the report is available for review by a hierarchy of responsive andmore » evaluative authorities via a wide area network. The evaluative authorities include a group of relevant experts who may be widely or even globally distributed.« less

System and method for identifying, reporting, and evaluating presence of substance

DOEpatents

Smith, Maurice [Kansas City, MO; Lusby, Michael [Kansas City, MO; Van Hook, Arthur [Lotawana, MO; Cook, Charles J [Raytown, MO; Wenski, Edward G [Lenexa, KS; Solyom, David [Overland Park, KS

2012-02-14

A system and method for identifying, reporting, and evaluating a presence of a solid, liquid, gas, or other substance of interest, particularly a dangerous, hazardous, or otherwise threatening chemical, biological, or radioactive substance. The system comprises one or more substantially automated, location self-aware remote sensing units; a control unit; and one or more data processing and storage servers. Data is collected by the remote sensing units and transmitted to the control unit; the control unit generates and uploads a report incorporating the data to the servers; and thereafter the report is available for review by a hierarchy of responsive and evaluative authorities via a wide area network. The evaluative authorities include a group of relevant experts who may be widely or even globally distributed.

System And Method For Identifying, Reporting, And Evaluating Presence Of Substance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Maurice; Lusby, Michael; Hook, Arthur Van

A system and method for identifying, reporting, and evaluating a presence of a solid, liquid, gas, or other substance of interest, particularly a dangerous, hazardous, or otherwise threatening chemical, biological, or radioactive substance. The system comprises one or more substantially automated, location self-aware remote sensing units; a control unit; and one or more data processing and storage servers. Data is collected by the remote sensing units and transmitted to the control unit; the control unit generates and uploads a report incorporating the data to the servers; and thereafter the report is available for review by a hierarchy of responsive andmore » evaluative authorities via a wide area network. The evaluative authorities include a group of relevant experts who may be widely or even globally distributed.« less

Reliability and risk assessment of structures

NASA Technical Reports Server (NTRS)

Chamis, C. C.

1991-01-01

Development of reliability and risk assessment of structural components and structures is a major activity at Lewis Research Center. It consists of five program elements: (1) probabilistic loads; (2) probabilistic finite element analysis; (3) probabilistic material behavior; (4) assessment of reliability and risk; and (5) probabilistic structural performance evaluation. Recent progress includes: (1) the evaluation of the various uncertainties in terms of cumulative distribution functions for various structural response variables based on known or assumed uncertainties in primitive structural variables; (2) evaluation of the failure probability; (3) reliability and risk-cost assessment; and (4) an outline of an emerging approach for eventual certification of man-rated structures by computational methods. Collectively, the results demonstrate that the structural durability/reliability of man-rated structural components and structures can be effectively evaluated by using formal probabilistic methods.

Evaluation of selected methods for determining streamflow during periods of ice effect

USGS Publications Warehouse

Melcher, Norwood B.; Walker, J.F.

1992-01-01

Seventeen methods for estimating ice-affected streamflow are evaluated for potential use with the U.S. Geological Survey streamflow-gaging station network. The methods evaluated were identified by written responses from U.S. Geological Survey field offices and by a comprehensive literature search. The methods selected and techniques used for applying the methods are described in this report. The methods are evaluated by comparing estimated results with data collected at three streamflow-gaging stations in Iowa during the winter of 1987-88. Discharge measurements were obtained at 1- to 5-day intervals during the ice-affected periods at the three stations to define an accurate baseline record. Discharge records were compiled for each method based on data available, assuming a 6-week field schedule. The methods are classified into two general categories-subjective and analytical--depending on whether individual judgment is necessary for method application. On the basis of results of the evaluation for the three Iowa stations, two of the subjective methods (discharge ratio and hydrographic-and-climatic comparison) were more accurate than the other subjective methods and approximately as accurate as the best analytical method. Three of the analytical methods (index velocity, adjusted rating curve, and uniform flow) could potentially be used at streamflow-gaging stations, where the need for accurate ice-affected discharge estimates justifies the expense of collecting additional field data. One analytical method (ice-adjustment factor) may be appropriate for use at stations with extremely stable stage-discharge ratings and measuring sections. Further research is needed to refine the analytical methods. The discharge-ratio and multiple-regression methods produce estimates of streamflow for varying ice conditions using information obtained from the existing U.S. Geological Survey streamflow-gaging network.

Cervical motion assessment using virtual reality.

PubMed

Sarig-Bahat, Hilla; Weiss, Patrice L; Laufer, Yocheved

2009-05-01

Repeated measures of cervical motion in asymptomatic subjects. To introduce a virtual reality (VR)-based assessment of cervical range of motion (ROM); to establish inter and intratester reliability of the VR-based assessment in comparison with conventional assessment in asymptomatic individuals; and to evaluate the effect of a single VR session on cervical ROM. Cervical ROM and clinical issues related to neck pain is frequently studied. A wide variety of methods is available for evaluation of cervical motion. To date, most methods rely on voluntary responses to an assessor's instructions. However, in day-to-day life, head movement is generally an involuntary response to multiple stimuli. Therefore, there is a need for a more functional assessment method, using sensory stimuli to elicit spontaneous neck motion. VR attributes may provide a methodology for achieving this goal. A novel method was developed for cervical motion assessment utilizing an electromagnetic tracking system and a VR game scenario displayed via a head mounted device. Thirty asymptomatic participants were assessed by both conventional and VR-based methods. Inter and intratester repeatability analyses were performed. The effect of a single VR session on ROM was evaluated. Both assessments showed non-biased results between tests and between testers (P > 0.1). Full-cycle repeatability coefficients ranged between 15.0 degrees and 29.2 degrees with smaller values for rotation and for the VR assessment. A single VR session significantly increased ROM, with largest effect found in the rotation direction. Inter and intratester reliability was supported for both the VR-based and the conventional methods. Results suggest better repeatability for the VR method, with rotation being more precise than flexion/extension. A single VR session was found to be effective in increasing cervical motion, possibly due to its motivating effect.

On "an experimental evaluation of sensorimotor patterning": a critique.

PubMed

Zigler, E; Seitz, V

1975-03-01

A critique was presented of a study by Neman, Roos, McCann, Menolascino, and Heal (1975) in which a sensorimotor training method of treatment for retarded children was evaluated. They presented evidence which they interpreted as support for the effectiveness of this treatment method in benefiting their sample of retarded individuals. Many shortcomings of the Neman et al. study were pointed out in the areas of evaluating the theoretical rationale underlying the treatment, subject selection, procedure, statistical analyses, and interpretation of the findings. In addition, the problems raised by the premature release of the findings to the press were discussed. Special note was made of the potential harmful effects of this publicity on retarded children and their families. The important role and responsibility of the National Association for Retarded Citizens in endorsing and recommending treatment methods for retarded individuals was also discussed.

Bayes Factor Covariance Testing in Item Response Models.

PubMed

Fox, Jean-Paul; Mulder, Joris; Sinharay, Sandip

2017-12-01

Two marginal one-parameter item response theory models are introduced, by integrating out the latent variable or random item parameter. It is shown that both marginal response models are multivariate (probit) models with a compound symmetry covariance structure. Several common hypotheses concerning the underlying covariance structure are evaluated using (fractional) Bayes factor tests. The support for a unidimensional factor (i.e., assumption of local independence) and differential item functioning are evaluated by testing the covariance components. The posterior distribution of common covariance components is obtained in closed form by transforming latent responses with an orthogonal (Helmert) matrix. This posterior distribution is defined as a shifted-inverse-gamma, thereby introducing a default prior and a balanced prior distribution. Based on that, an MCMC algorithm is described to estimate all model parameters and to compute (fractional) Bayes factor tests. Simulation studies are used to show that the (fractional) Bayes factor tests have good properties for testing the underlying covariance structure of binary response data. The method is illustrated with two real data studies.

Stimulated echo diffusion tensor imaging and SPAIR T2-weighted imaging in Chronic Exertional Compartment Syndrome of the lower leg muscles

PubMed Central

Sigmund, Eric E.; Sui, Dabang; Ukpebor, Obehi; Baete, Steven; Fieremans, Els; Babb, James S.; Mechlin, Michael; Liu, Kecheng; Kwon, Jane; Mcgorty, KellyAnne; Hodnett, Phil; Bencardino, Jenny

2013-01-01

Purpose To evaluate the performance of diffusion tensor imaging (DTI) in the evaluation of chronic exertional compartment syndrome (CECS) as compared to T2-weighted imaging. Materials and Methods Using an IRB-approved HIPAA-compliant protocol, spectral adiabatic inversion recovery (SPAIR) T2-weighted imaging (T2w) and stimulated echo DTI were applied to 8 healthy volunteers and 14 suspected CECS patients before and after exertion. Longitudinal and transverse diffusion eigenvalues, mean diffusivity (MD), and fractional anisotropy (FA) were measured in 7 calf muscle compartments, which in patients were classified by their response on T2w: normal (<20% change), and CECS (>20% change). Mixed model analysis of variance compared subject groups and compartments in terms of response factors (post-/pre-exercise ratios) of DTI parameters. Results All diffusivities significantly increased (p<0.0001) and FA decreased (p=.0014) with exercise. Longitudinal diffusion responses were significantly smaller than transversal diffusion responses (p<0.0001). 19 of 98 patient compartments were classified as CECS on T2w. MD increased by 3.8±3.4% (volunteer), 7.4±4.2 % (normal), and 9.1±7.0% (CECS) with exercise. Conclusion DTI shows promise as an ancillary imaging method in the diagnosis and understanding of the pathophysiology in CECS. Future studies may explore its utility in predicting response to treatment. PMID:23440764

Can Principals Promote Teacher Development as Evaluators? A Case Study of Principals’ Views and Experiences

PubMed Central

Kraft, Matthew A.; Gilmour, Allison

2017-01-01

Purpose New teacher evaluation systems have expanded the role of principals as instructional leaders, but little is known about principals’ ability to promote teacher development through the evaluation process. We conducted a case study of principals’ perspectives on evaluation and their experiences implementing observation and feedback cycles to better understand whether principals feel as though they are able to promote teacher development as evaluators. Research Methods We conducted interviews with a stratified random sample of 24 principals in an urban district that recently implemented major reforms to its teacher evaluation system. We analyzed these interviews by drafting thematic summaries, coding interview transcripts, creating data-analytic matrices, and writing analytic memos. Findings We found that the evaluation reforms provided a common framework and language that helped facilitate principals’ feedback conversations with teachers. However, we also found that tasking principals with primary responsibility for conducting evaluations resulted in a variety of unintended consequences which undercut the quality of evaluation feedback they provided. We analyze five broad solutions to these challenges: strategically targeting evaluations, reducing operational responsibilities, providing principal training, hiring instructional coaches, and developing peer evaluation systems. Implications The quality of feedback teachers receive through the evaluation process depends critically on the time and training evaluators have to provide individualized and actionable feedback. Districts that task principals with primary responsibility for conducting observation and feedback cycles must attend to the many implementation challenges associated with this approach in order for next-generation evaluation systems to successfully promote teacher development. PMID:28729742

Cost and accuracy of advanced breeding trial designs in apple

PubMed Central

Harshman, Julia M; Evans, Kate M; Hardner, Craig M

2016-01-01

Trialing advanced candidates in tree fruit crops is expensive due to the long-term nature of the planting and labor-intensive evaluations required to make selection decisions. How closely the trait evaluations approximate the true trait value needs balancing with the cost of the program. Designs of field trials of advanced apple candidates in which reduced number of locations, the number of years and the number of harvests per year were modeled to investigate the effect on the cost and accuracy in an operational breeding program. The aim was to find designs that would allow evaluation of the most additional candidates while sacrificing the least accuracy. Critical percentage difference, response to selection, and correlated response were used to examine changes in accuracy of trait evaluations. For the quality traits evaluated, accuracy and response to selection were not substantially reduced for most trial designs. Risk management influences the decision to change trial design, and some designs had greater risk associated with them. Balancing cost and accuracy with risk yields valuable insight into advanced breeding trial design. The methods outlined in this analysis would be well suited to other horticultural crop breeding programs. PMID:27019717

Evaluation of Heating Methods for Thermal Structural Testing of Large Structures

NASA Technical Reports Server (NTRS)

Daryabeigi, Kamran; Sikora, Joseph G.; Caldwell, Darrell L., Jr.

1998-01-01

An experimental study was conducted to evaluate different heating methods for thermal structural testing of large scale structures at temperatures up to 350 F as part of the High Speed Research program. The heating techniques evaluated included: radiative/convective, forced convective, and conductive. The radiative/convective heaters included finned strip heaters, and clear and frosted quartz lamps. The forced convective heating was accomplished by closed loop circulation of heated air. The conductive heater consisted of heating blankets. The tests were conducted on an 1/8 inch thick stainless steel plate in a custom-built oven. The criteria used for comparing the different heating methods included test specimen temperature uniformity, heater response time, and consumed power. The parameters investigated included air circulation in the oven, reflectance of oven walls, and the orientation of the test specimen and heaters (vertical and horizontal). It was found that reflectance of oven walls was not an important parameter. Air circulation was necessary to obtain uniform temperatures only for the vertically oriented specimen. Heating blankets provided unacceptably high temperature non-uniformities. Quartz lamps with internal air circulation had the lowest power consumption levels. Using frosted quartz lamps with closed loop circulation of cool air, and closed loop circulation of heated air provided the fastest response time.

An Empirical Comparison of Five Linear Equating Methods for the NEAT Design

ERIC Educational Resources Information Center

Suh, Youngsuk; Mroch, Andrew A.; Kane, Michael T.; Ripkey, Douglas R.

2009-01-01

In this study, a data base containing the responses of 40,000 candidates to 90 multiple-choice questions was used to mimic data sets for 50-item tests under the "nonequivalent groups with anchor test" (NEAT) design. Using these smaller data sets, we evaluated the performance of five linear equating methods for the NEAT design with five levels of…

Psychophysiological Assessment Methods (Including a Register of Psychophysiologists - on Microfiches) (Methodes d’Evaluation Psychophysiologique (Liste de Psychophysiologues Incluse sur Microfiches)

DTIC Science & Technology

1994-05-01

Aerospace Medicine, 35:365-370. Freeman, L.J, Conway, A., and Nixon, P.G.F. (1986). Physiological responses to psychological challenge 0 under hypnosis ...CFHP 2255 H Street 0 Department of Psychology 172 Wright-Patterson AFB OH 45433-7022 University of North Texas Denton TX 76203 Forensic Research

Evaluation of traditional plant extracts for innate immune mechanisms and disease resistance against fish bacterial Aeromonas hydrophila and Pseudomonas sp.

NASA Astrophysics Data System (ADS)

Hardi, E. H.; Saptiani, G.; Kusuma, I. W.; Suwinarti, W.; Nugroho, R. A.

2018-03-01

The purposes of this study were to evaluate effect of ethanol herbal extracts of Boesenbergia pandurata, Solanum ferox and Zingimber zerumbet on Tilapia (Oreochromis nilaticus) innate immune mechanisms and disease resistance against Aeromonas hydrophila and Pseudomonas sp. Fish were intramuscularly injected with 0.1 mL/fish (1010 CFU mL-1) of each bacterium on the day 6th of post treatment using extract by several methods (injection, oral administration and immersion). The doses of extract were 600 ppm of B. pandurata, 900 ppm S. ferox and 200 ppm of Z. zerumbet. The percentage mortality, Relative Percent Survival (RPS) and innate immune response were assessed on weeks 1, 2, 3 and 4. All the methods were effective to enhance the immune parameters after 2 weeks application and the RPS of treatment reached more than 90 %. The results showed that the injection method of extracts was the most effective method to control A. hydrophila and Pseudomonas sp. The result indicated that all the doses of extracts could be significantly influence the immune response and protect the health status of tilapia against A. hydrophila and Pseudomonas sp. infections.

Reliability-Based Stability Analysis of Rock Slopes Using Numerical Analysis and Response Surface Method

NASA Astrophysics Data System (ADS)

Dadashzadeh, N.; Duzgun, H. S. B.; Yesiloglu-Gultekin, N.

2017-08-01

While advanced numerical techniques in slope stability analysis are successfully used in deterministic studies, they have so far found limited use in probabilistic analyses due to their high computation cost. The first-order reliability method (FORM) is one of the most efficient probabilistic techniques to perform probabilistic stability analysis by considering the associated uncertainties in the analysis parameters. However, it is not possible to directly use FORM in numerical slope stability evaluations as it requires definition of a limit state performance function. In this study, an integrated methodology for probabilistic numerical modeling of rock slope stability is proposed. The methodology is based on response surface method, where FORM is used to develop an explicit performance function from the results of numerical simulations. The implementation of the proposed methodology is performed by considering a large potential rock wedge in Sumela Monastery, Turkey. The accuracy of the developed performance function to truly represent the limit state surface is evaluated by monitoring the slope behavior. The calculated probability of failure is compared with Monte Carlo simulation (MCS) method. The proposed methodology is found to be 72% more efficient than MCS, while the accuracy is decreased with an error of 24%.

Method for the measurement of susceptibility to decubitus ulcer formation.

PubMed

Meijer, J H; Schut, G L; Ribbe, M W; Goovaerts, H G; Nieuwenhuys, R; Reulen, J P; Schneider, H

1989-09-01

A method for measuring the susceptibility of a patient to develop decubitus ulcers is described and initially evaluated. It is based on an indirect, noninvasive measurement of the transient regional blood flow response after a test pressure load which simulates the external stimulus for pressure-sore formation. This method was developed to determine the individual risk of a patient and to study the subfactors which contribute to the susceptibility. This would also offer the possibility of evaluating the effect of preventive treatment aimed at reducing the susceptibility. The method was found to discriminate between preselected elderly patients at risk on the one hand, and non-risk patients and healthy young adults on the other hand. No differences in blood flow responses were found between the non-risk elderly patients and the healthy young adults. This suggests that age per se is not a factor in the formation of pressure sores. In the risk group the recovery time after pressure relief was found to be three times as long as the duration of the pressure exercise. This indicates that the recovery time after pressure exercise may be as important as the period of pressure exercise in deducing the risk of developing decubitus ulcers.

Quantifying the signals contained in heterogeneous neural responses and determining their relationships with task performance

PubMed Central

Pagan, Marino

2014-01-01

The responses of high-level neurons tend to be mixtures of many different types of signals. While this diversity is thought to allow for flexible neural processing, it presents a challenge for understanding how neural responses relate to task performance and to neural computation. To address these challenges, we have developed a new method to parse the responses of individual neurons into weighted sums of intuitive signal components. Our method computes the weights by projecting a neuron's responses onto a predefined orthonormal basis. Once determined, these weights can be combined into measures of signal modulation; however, in their raw form these signal modulation measures are biased by noise. Here we introduce and evaluate two methods for correcting this bias, and we report that an analytically derived approach produces performance that is robust and superior to a bootstrap procedure. Using neural data recorded from inferotemporal cortex and perirhinal cortex as monkeys performed a delayed-match-to-sample target search task, we demonstrate how the method can be used to quantify the amounts of task-relevant signals in heterogeneous neural populations. We also demonstrate how these intuitive quantifications of signal modulation can be related to single-neuron measures of task performance (d′). PMID:24920017

Robust Online Monitoring for Calibration Assessment of Transmitters and Instrumentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramuhalli, Pradeep; Coble, Jamie B.; Shumaker, Brent

Robust online monitoring (OLM) technologies are expected to enable the extension or elimination of periodic sensor calibration intervals in operating and new reactors. These advances in OLM technologies will improve the safety and reliability of current and planned nuclear power systems through improved accuracy and increased reliability of sensors used to monitor key parameters. In this article, we discuss an overview of research being performed within the Nuclear Energy Enabling Technologies (NEET)/Advanced Sensors and Instrumentation (ASI) program, for the development of OLM algorithms to use sensor outputs and, in combination with other available information, 1) determine whether one or moremore » sensors are out of calibration or failing and 2) replace a failing sensor with reliable, accurate sensor outputs. Algorithm development is focused on the following OLM functions: • Signal validation • Virtual sensing • Sensor response-time assessment These algorithms incorporate, at their base, a Gaussian Process-based uncertainty quantification (UQ) method. Various plant models (using kernel regression, GP, or hierarchical models) may be used to predict sensor responses under various plant conditions. These predicted responses can then be applied in fault detection (sensor output and response time) and in computing the correct value (virtual sensing) of a failing physical sensor. The methods being evaluated in this work can compute confidence levels along with the predicted sensor responses, and as a result, may have the potential for compensating for sensor drift in real-time (online recalibration). Evaluation was conducted using data from multiple sources (laboratory flow loops and plant data). Ongoing research in this project is focused on further evaluation of the algorithms, optimization for accuracy and computational efficiency, and integration into a suite of tools for robust OLM that are applicable to monitoring sensor calibration state in nuclear power plants.« less

Total hydrocarbon analysis by ion mobility spectrometry

NASA Technical Reports Server (NTRS)

Cross, John H.; Limero, Thomas F.; James, John T.

1994-01-01

Astronauts must be alerted quickly to chemical leaks that compromise their health and the success of their missions. An ideal leak detector would be equally sensitive to all compounds that might constitute a hazard and insensitive to nontoxic compounds. No ideal sensor exists; thus, selection of a methodology is a series of compromises. The commonly used methods are either insensitive at the low exposure levels set by OSHA, NASA, and other organizations or are selectively insensitive to important classes of chemicals such as Freons. After extensive study and experience, the Toxicology Group at JSC has selected ion mobility spectrometry (IMS) for development into a broad range, sensitive detector. In addition to the sensing method, signal processing is important leak detection because a background signal can be expected at all times. The leak-detecting instrument must be programmed to discriminate between authentic leaks and background fluctuations caused by routine operations. The results of an evaluation of the prototype THA is presented in terms related to spacecraft operations. The evaluation included determination of instrumental parameters such as stability and response times. We also included responses to some common components of spacecraft atmospheres in pure form and in binary and ternary mixtures. The output of the four algorithms to the mixtures was found to be noticeably different. These responses are compared on the basis of their utility for signaling a chemical leak. As a means of evaluating its resistance to a falsely positive response, the THA was challenged with carbon dioxide and methane, compounds whose concentrations normally increase in spacecraft air during human habitation. The instrument showed virtually no response to these interferences. Although the prototype THA is designed for space flight, this detector is expected to be useful for field screening at chemical waste dumps and other environmentally sensitive locations.

Multi-response optimization of T300/epoxy prepreg tape-wound cylinder by grey relational analysis coupled with the response surface method

NASA Astrophysics Data System (ADS)

Kang, Chao; Shi, Yaoyao; He, Xiaodong; Yu, Tao; Deng, Bo; Zhang, Hongji; Sun, Pengcheng; Zhang, Wenbin

2017-09-01

This study investigates the multi-objective optimization of quality characteristics for a T300/epoxy prepreg tape-wound cylinder. The method integrates the Taguchi method, grey relational analysis (GRA) and response surface methodology, and is adopted to improve tensile strength and reduce residual stress. In the winding process, the main process parameters involving winding tension, pressure, temperature and speed are selected to evaluate the parametric influences on tensile strength and residual stress. Experiments are conducted using the Box-Behnken design. Based on principal component analysis, the grey relational grades are properly established to convert multi-responses into an individual objective problem. Then the response surface method is used to build a second-order model of grey relational grade and predict the optimum parameters. The predictive accuracy of the developed model is proved by two test experiments with a low prediction error of less than 7%. The following process parameters, namely winding tension 124.29 N, pressure 2000 N, temperature 40 °C and speed 10.65 rpm, have the highest grey relational grade and give better quality characteristics in terms of tensile strength and residual stress. The confirmation experiment shows that better results are obtained with GRA improved by the proposed method than with ordinary GRA. The proposed method is proved to be feasible and can be applied to optimize the multi-objective problem in the filament winding process.

Qualitative interpretation of PET scans using a Likert scale to assess neck node response to radiotherapy in head and neck cancer.

PubMed

Sjövall, Johanna; Bitzén, Ulrika; Kjellén, Elisabeth; Nilsson, Per; Wahlberg, Peter; Brun, Eva

2016-04-01

The aim of this study was to determine whether PET scans after radiotherapy (RT), visually interpreted as equivocal regarding metabolic neck node response can be used to accurately categorize patients as responders or nonresponders using a Likert scale and/or maximum standardized uptake value (SUVmax). Other aims were to determine the performance of different methods for assessing post-RT PET scans (visual inspection, a Likert scale and SUVmax) and to establish whether any method is superior in predicting regional control (RC) and overall survival (OS). In 105 patients with neck node-positive head and neck cancer, the neck node response was evaluated by FDG PET/CT 6 weeks after RT. The scans were clinically assessed by visual inspection and, for the purposes of this analysis, re-evaluated using the Deauville criteria, a five-point Likert scale previously used in lymphoma studies. In addition, SUVmax was determined. All assessment methods were able to significantly predict RC but not OS. The methods were also able to significantly predict remission of tumour after completion of RT. Of the 105 PET scans, 19 were judged as equivocal on visual inspection. The Likert scale was preferable to SUVmax for grouping patients as responders or nonresponders. All methods (visual inspection, SUVmax and the Likert scale) identified responders and nonresponders and predicted RC. A Likert scale is a promising tool to reduce to a minimum the problem of PET scans judged as equivocal. Consensus regarding qualitative assessment would facilitate PET reporting in clinical practice.

Abnormal Medial Prefrontal Cortex Activity in Heavy Cannabis Users During Conscious Emotional Evaluation

PubMed Central

Lile, Joshua A.; Hanlon, Colleen A.; Porrino, Linda J.

2015-01-01

Rationale Long-term heavy cannabis users (cannabis users) who are not acutely intoxicated have diminished subconscious neural responsiveness to affective stimuli. Objective This study sought to determine if abnormal processing extends to the conscious evaluation of emotional stimuli. Methods Functional Magnetic Resonance Imaging (fMRI) was used to examine brain activity as cannabis users (N=16) and non-cannabis using controls (N=17) evaluated and categorized standardized International Affective Picture System (IAPS) stimuli. Individual judgments were used to isolate activity during the evaluation of emotional (i.e., emotional evaluation) or neutral (i.e., neutral evaluation) stimuli. Within- and between-group analyses were performed. Results Both groups judged the same stimuli as emotional and had activations in visual, midbrain, and middle cingulate cortices during emotional evaluation, relative to neutral. Within-group analyses also revealed amygdalar and inferior frontal gyrus activations in controls, but not cannabis users, and medial prefrontal cortex (mPFC) deactivations in cannabis users, but not controls, during emotional evaluation, relative to neutral. Between-group comparisons found that mPFC activity during positive and negative evaluation was significantly hypoactive in cannabis users, relative to controls. Conclusions Abnormal neural processing of affective content extends to the level of consciousness in cannabis users. The hypoactive mPFC responses observed resembles the attenuated mPFC responses found during increased non-affective cognitive load in prior research. These findings suggest that abnormal mPFC singling in cannabis users during emotional evaluation might be associated with increased non-affective cognitive load. PMID:26690589

Diagnosing Physical Plant Operation

ERIC Educational Resources Information Center

McKay, B. P.; Smith, H. W.

1972-01-01

Describes a survey designed to help administrators evaluate functional aspects, adequacy of employee work areas, quality of housekeeping methods, maintenance response, interior and exterior appearances, alteration and renovation satisfaction, employee feelings about parking adequacy, plant security, and attraction and function of roads and…

Polyurethane foam for roadway stabilization NH Route 129, Loudon, NH.

DOT National Transportation Integrated Search

2016-12-12

This report summarizes the evaluation of the performance of polyurethane foam as a method of roadway : stabilization for a rural roadway experiencing substantial frost heaving. : NHDOT is responsible for many roads which have evolved from gravel road...

Polyurethane foam for roadway stabilization NH route 129, Loudon, NH.

DOT National Transportation Integrated Search

2016-12-12

This report summarizes the evaluation of the performance of polyurethane foam as a method of roadway : stabilization for a rural roadway experiencing substantial frost heaving. : NHDOT is responsible for many roads which have evolved from gravel road...

System identification through nonstationary data using Time-Frequency Blind Source Separation

NASA Astrophysics Data System (ADS)

Guo, Yanlin; Kareem, Ahsan

2016-06-01

Classical output-only system identification (SI) methods are based on the assumption of stationarity of the system response. However, measured response of buildings and bridges is usually non-stationary due to strong winds (e.g. typhoon, and thunder storm etc.), earthquakes and time-varying vehicle motions. Accordingly, the response data may have time-varying frequency contents and/or overlapping of modal frequencies due to non-stationary colored excitation. This renders traditional methods problematic for modal separation and identification. To address these challenges, a new SI technique based on Time-Frequency Blind Source Separation (TFBSS) is proposed. By selectively utilizing "effective" information in local regions of the time-frequency plane, where only one mode contributes to energy, the proposed technique can successfully identify mode shapes and recover modal responses from the non-stationary response where the traditional SI methods often encounter difficulties. This technique can also handle response with closely spaced modes which is a well-known challenge for the identification of large-scale structures. Based on the separated modal responses, frequency and damping can be easily identified using SI methods based on a single degree of freedom (SDOF) system. In addition to the exclusive advantage of handling non-stationary data and closely spaced modes, the proposed technique also benefits from the absence of the end effects and low sensitivity to noise in modal separation. The efficacy of the proposed technique is demonstrated using several simulation based studies, and compared to the popular Second-Order Blind Identification (SOBI) scheme. It is also noted that even some non-stationary response data can be analyzed by the stationary method SOBI. This paper also delineates non-stationary cases where SOBI and the proposed scheme perform comparably and highlights cases where the proposed approach is more advantageous. Finally, the performance of the proposed method is evaluated using a full-scale non-stationary response of a tall building during an earthquake and found it to perform satisfactorily.

Reduction in growth threshold for pulmonary metastases: an opportunity for volumetry and its impact on treatment decisions.

PubMed

Vogel, M N; Schmücker, S; Maksimovic, O; Hartmann, J; Claussen, C D; Horger, M

2012-07-01

This study compares tumour response assessment by automated CT volumetry and standard manual measurements regarding the impact on treatment decisions and patient outcome. 58 consecutive patients with 203 pulmonary metastases undergoing baseline and follow-up multirow detector CT (MDCT) under chemotherapy were assessed for response to chemotherapy. Tumour burden of pulmonary target lesions was quantified in three ways: (1) following response evaluation criteria in solid tumours (RECIST); (2) following the volume equivalents of RECIST (i.e. with a threshold of -65/+73%); and (3) using calculated limits for stable disease (SD). For volumetry, calculated limits had been set at ±38% prior to the study by repeated quantification of nodules scanned twice. Results were compared using non-weighted κ-values and were evaluated for their impact on treatment decisions and patient outcome. In 15 (17%) of the 58 patients, the results of response assessment were inconsistent with 1 of the 3 methods, which would have had an impact on treatment decisions in 8 (13%). Patient outcome regarding therapy response could be verified in 5 (33%) of the 15 patients with inconsistent measurement results and was consistent with both RECIST and volumetry in 1, with calculated limits in 3 and with none in 1. Diagnosis as to the overall response was consistent with RECIST in six patients, with volumetry in six and with calculated limits in eight cases. There is an impact of different methods for therapy response assessment on treatment decisions. A reduction of threshold for SD to ±30-40% of volume change seems reasonable when using volumetry.

International experiences in assessing vitamin A status and applying the vitamin A-labeled isotope dilution method.

PubMed

Lopez-Teros, Veronica; Chileshe, Justin; Idohou-Dossou, Nicole; Fajarwati, Tetra; Medoua Nama, Gabriel; Newton, Sam; Vinod Kumar, Malavika; Wang, Zhixu; Wasantwisut, Emorn; Hunt, Janet R

2014-01-01

Inadequate vitamin A (VA) nutrition continues to be a major problem worldwide, and many interventions being implemented to improve VA status in various populations need to be evaluated. The interpretation of results after an intervention depends greatly on the method selected to assess VA status. To evaluate the effect of an intervention on VA status, researchers in Cameroon, India, Indonesia, Mexico, Senegal and Zambia have used serum retinol as an indicator, and have not always found improvement in response to supplementation. One problem is that homeostatic control of serum retinol may mask positive effects of treatment in that changes in concentration are observed only when status is either moderately to severely depleted or excessive. Because VA is stored mainly in the liver, measurements of hepatic VA stores are the “gold standard” for assessing VA status. Dose response tests such as the relative dose response (RDR) and the modified relative dose response (MRDR), allow a qualitative assessment of VA liver stores. On the other hand, the use of the vitamin A-labeled isotope dilution (VALID) technique, (using 13C or 2H-labeled retinyl acetate) serves as an indirect method to quantitatively estimate total body and liver VA stores. Countries including Cameroon, China, Ghana, Mexico, Thailand and Zambia are now applying the VALID method to sensitively assess changes in VA status during interventions, or to estimate a population’s dietary requirement for VA. Transition to the use of more sensitive biochemical indicators of VA status such as the VALID technique is needed to effectively assess interventions in populations where mild to moderate VA deficiency is more prevalent than severe deficiency.

"Heart-cut" bidimensional achiral-chiral liquid chromatography applied to the evaluation of stereoselective metabolism, in vivo biological activity and brain response to chiral drug candidates targeting the central nervous system.

PubMed

Battisti, Umberto M; Citti, Cinzia; Larini, Martina; Ciccarella, Giuseppe; Stasiak, Natalia; Troisi, Luigino; Braghiroli, Daniela; Parenti, Carlo; Zoli, Michele; Cannazza, Giuseppe

2016-04-22

A "heart-cut" two-dimensional achiral-chiral liquid chromatography triple-quadrupole mass spectrometry method (LC-LC-MS/MS) was developed and coupled to in vivo cerebral microdialysis to evaluate the brain response to the chiral compound (±)-7-chloro-5-(3-furanyl)-3-methyl-3,4-dihydro-2H-1,2,4-benzothiadiazine-1,1-dioxide ((±)-1), a potent positive allosteric modulator (PAM) of AMPA receptor. The method was successfully employed to evaluate also its stereoselective metabolism and in vitro biological activity. In particular, the LC achiral method developed, employs a pentafluorinated silica based column (Discovery HS-F5) to separate dopamine, acetylcholine, serotonin, (±)-1 and its two hepatic metabolites. In the "heart-cut" two-dimension achiral-chiral configuration, (±)-1 and (±)-1-d4 eluted from the achiral column (1st dimension), were transferred to a polysaccharide-based chiral column (2nd dimension, Chiralcel OD-RH) by using an automatic six-port valve. Single enantiomers of (±)-1 were separated and detected using electrospray positive ionization mode and quantified in selected reaction monitoring mode. The method was validated and showed good performance in terms of linearity, accuracy and precision. The new method employed showed several possible applications in the evaluation of: (a) brain response to neuroactive compounds by measuring variations in the brain extracellular levels of selected neurotransmitters and other biomarkers; (b) blood brain barrier penetration of drug candidates by measuring the free concentration of the drug in selected brain areas; (c) the presence of drug metabolites in the brain extracellular fluid that could prove very useful during drug discovery; (d) a possible stereoselective metabolization or blood brain barrier stereoselective crossing of chiral drugs. Finally, compared to the methods reported in the literature, this technique avoids the necessity of euthanizing an animal at each time point to measure drug concentration in whole brain tissue and provides continuous monitoring of extracellular concentrations of single chiral drug enantiomers along with its metabolites in specific brain regions at each selected time point for a desired period by using a single animal. Copyright © 2016 Elsevier B.V. All rights reserved.

Multivariate Probabilistic Analysis of an Hydrological Model

NASA Astrophysics Data System (ADS)

Franceschini, Samuela; Marani, Marco

2010-05-01

Model predictions derived based on rainfall measurements and hydrological model results are often limited by the systematic error of measuring instruments, by the intrinsic variability of the natural processes and by the uncertainty of the mathematical representation. We propose a means to identify such sources of uncertainty and to quantify their effects based on point-estimate approaches, as a valid alternative to cumbersome Montecarlo methods. We present uncertainty analyses on the hydrologic response to selected meteorological events, in the mountain streamflow-generating portion of the Brenta basin at Bassano del Grappa, Italy. The Brenta river catchment has a relatively uniform morphology and quite a heterogeneous rainfall-pattern. In the present work, we evaluate two sources of uncertainty: data uncertainty (the uncertainty due to data handling and analysis) and model uncertainty (the uncertainty related to the formulation of the model). We thus evaluate the effects of the measurement error of tipping-bucket rain gauges, the uncertainty in estimating spatially-distributed rainfall through block kriging, and the uncertainty associated with estimated model parameters. To this end, we coupled a deterministic model based on the geomorphological theory of the hydrologic response to probabilistic methods. In particular we compare the results of Monte Carlo Simulations (MCS) to the results obtained, in the same conditions, using Li's Point Estimate Method (LiM). The LiM is a probabilistic technique that approximates the continuous probability distribution function of the considered stochastic variables by means of discrete points and associated weights. This allows to satisfactorily reproduce results with only few evaluations of the model function. The comparison between the LiM and MCS results highlights the pros and cons of using an approximating method. LiM is less computationally demanding than MCS, but has limited applicability especially when the model response is highly nonlinear. Higher-order approximations can provide more accurate estimations, but reduce the numerical advantage of the LiM. The results of the uncertainty analysis identify the main sources of uncertainty in the computation of river discharge. In this particular case the spatial variability of rainfall and the model parameters uncertainty are shown to have the greatest impact on discharge evaluation. This, in turn, highlights the need to support any estimated hydrological response with probability information and risk analysis results in order to provide a robust, systematic framework for decision making.

Text messaging data collection for monitoring an infant feeding intervention program in rural China: feasibility study.

PubMed

Li, Ye; Wang, Wei; van Velthoven, Michelle Helena; Chen, Li; Car, Josip; Rudan, Igor; Zhang, Yanfeng; Wu, Qiong; Du, Xiaozhen; Scherpbier, Robert W

2013-12-04

An effective data collection method is crucial for high quality monitoring of health interventions. The traditional face-to-face data collection method is labor intensive, expensive, and time consuming. With the rapid increase of mobile phone subscribers, text messaging has the potential to be used for evaluation of population health interventions in rural China. The objective of this study was to explore the feasibility of using text messaging as a data collection tool to monitor an infant feeding intervention program. Participants were caregivers of children aged 0 to 23 months in rural China who participated in an infant feeding health education program. We used the test-retest method. First, we collected data with a text messaging survey and then with a face-to-face survey for 2 periods of 3 days. We compared the response rate, data agreement, costs, and participants' acceptability of the two methods. Also, we interviewed participants to explore their reasons for not responding to the text messages and the reasons for disagreement in the two methods. In addition, we evaluated the most appropriate time during the day for sending text messages. We included 258 participants; 99 (38.4%) participated in the text messaging survey and 177 (68.6%) in the face-to-face survey. Compared with the face-to-face survey, the text messaging survey had much lower response rates to at least one question (38.4% vs 68.6%) and to all 7 questions (27.9% vs 67.4%) with moderate data agreement (most kappa values between .5 and .75, the intraclass correlation coefficients between .53 to .72). Participants who took part in both surveys gave the same acceptability rating for both methods (median 4.0 for both on a 5-point scale, 1=disliked very much and 5=liked very much). The costs per questionnaire for the text messaging method were much lower than the costs for the face-to-face method: ¥19.7 (US $3.13) versus ¥33.9 (US $5.39) for all questionnaires, and ¥27.1 (US $4.31) versus ¥34.4 (US $5.47) for completed questionnaires. The main reasons for not replying were that participants did not receive text messages, they were too busy to reply, or they did not see text messages in time. The main reasons for disagreement in responses were that participants forgot their answers in the text messaging survey and that they changed their minds. We found that participants were more likely to reply to text messages immediately during 2 time periods: 8 AM to 3 PM and 8 PM to 9 PM. The text messaging method had reasonable data agreement and low cost, but a low response rate. Further research is needed to evaluate effectiveness of measures that can increase the response rate, especially in collecting longitudinal data by text messaging.

Flow injection analysis of picric acid explosive using a copper electrode as electrochemical detector.

PubMed

Junqueira, João R C; de Araujo, William R; Salles, Maiara O; Paixão, Thiago R L C

2013-01-30

A simple and fast electrochemical method for quantitative analysis of picric acid explosive (nitro-explosive) based on its electrochemical reduction at copper surfaces is reported. To achieve a higher sample throughput, the electrochemical sensor was adapted in a flow injection system. Under optimal experimental conditions, the peak current response increases linearly with picric acid concentration over the range of 20-300 μmol L(-1). The repeatability of the electrode response in the flow injection analysis (FIA) configuration was evaluated as 3% (n=10), and the detection limit of the method was estimated to be 6.0 μmol L(-1) (S/N=3). The sample throughput under optimised conditions was estimated to be 550 samples h(-1). Peroxide explosives like triacetone triperoxide (TATP) and hexamethylene triperoxide diamine (HMTD) were tested as potential interfering substances for the proposed method, and no significant interference by these explosives was noticed. The proposed method has interesting analytical parameters, environmental applications, and low cost compared with other electroanalytical methods that have been reported for the quantification of picric acid. Additionally, the possibility to develop an in situ device for the detection of picric acid using a disposable sensor was evaluated. Crown Copyright © 2012. Published by Elsevier B.V. All rights reserved.

A method for determining the actual rate of orientation switching of DNA self-assembled monolayers using optical and electrochemical frequency response analysis.

PubMed

Casanova-Moreno, J; Bizzotto, D

2015-02-17

Electrostatic control of the orientation of fluorophore-labeled DNA strands immobilized on an electrode surface has been shown to be an effective bioanalytical tool. Modulation techniques and later time-resolved measurements were used to evaluate the kinetics of the switching between lying and standing DNA conformations. These measurements, however, are the result of a convolution between the DNA "switching" response time and the other frequency limited responses in the measurement. In this work, a method for analyzing the response of a potential driven DNA sensor is presented by calculating the potential effectively dropped across the electrode interface (using electrochemical impedance spectroscopy) as opposed to the potential applied to the electrochemical cell. This effectively deconvolutes the effect of the charging time on the observed frequency response. The corrected response shows that DNA is able to switch conformation faster than previously reported using modulation techniques. This approach will ensure accurate measurements independent of the electrochemical system, removing the uncertainty in the analysis of the switching response, enabling comparison between samples and measurement systems.

Analysis and test evaluation of the dynamic response and stability of three advanced turboprop models

NASA Technical Reports Server (NTRS)

Bansal, P. N.; Arseneaux, P. J.; Smith, A. F.; Turnberg, J. E.; Brooks, B. M.

1985-01-01

Results of dynamic response and stability wind tunnel tests of three 62.2 cm (24.5 in) diameter models of the Prop-Fan, advanced turboprop, are presented. Measurements of dynamic response were made with the rotors mounted on an isolated nacelle, with varying tilt for nonuniform inflow. One model was also tested using a semi-span wing and fuselage configuration for response to realistic aircraft inflow. Stability tests were performed using tunnel turbulence or a nitrogen jet for excitation. Measurements are compared with predictions made using beam analysis methods for the model with straight blades, and finite element analysis methods for the models with swept blades. Correlations between measured and predicted rotating blade natural frequencies for all the models are very good. The IP dynamic response of the straight blade model is reasonably well predicted. The IP response of the swept blades is underpredicted and the wing induced response of the straight blade is overpredicted. Two models did not flutter, as predicted. One swept blade model encountered an instability at a higher RPM than predicted, showing predictions to be conservative.

Concordance of Carcinoembryonic Antigen Ratio and Response Evaluation Criteria in Solid Tumors as Prognostic Surrogate Indicators of Metastatic Colorectal Cancer Patients Treated with Chemotherapy.

PubMed

Huang, Sheng-Chieh; Lin, Jen-Kou; Lin, Tzu-Chen; Chen, Wei-Shone; Yang, Shung-Haur; Wang, Huann-Sheng; Lan, Yuan-Tzu; Lin, Chun-Chi; Jiang, Jeng-Kai; Chang, Shih-Ching

2015-07-01

Carcinoembryonic antigen (CEA) is widely used as a tumor marker in colorectal cancer (CRC). This study aimed to evaluate the role of the degree of change in CEA levels during the treatment period and found that the degree of change highly correlated with disease survival and Response Evaluation Criteria in Solid Tumors (RECIST) criteria in evaluating therapy response. A total of 447 metastatic CRC patients treated with surgery of the primary tumor followed by systemic therapy at a single center from the year 2000 through 2011 were reviewed. The degree of change in CEA levels was expressed as the CEA ratio (post-CEA/pre-CEA) and classified into four groups during the treatment period for further evaluation. The imaging change of the same population was also compared with the CEA ratio during the treatment period. The CEA ratio was significantly correlated with different chemotherapy regimens (p < 0.001), pre-treatment CEA level (p < 0.001), lymphovascular invasion (p = 0.006), and tumor differentiation (p = 0.018). CEA ratio and imaging change according to RECIST criteria were both correlated with overall survival (p < 0.001). These two methods for evaluating treatment response were highly correlated (p < 0.001). CEA ratio was found to be a reliable prognostic factor in stage IV CRC, and was highly correlated with the imaging survey according to RECIST criteria. Further prospective studies are essential to validate these findings.

Real-time in vivo detection of biomaterial-induced reactive oxygen species.

PubMed

Liu, Wendy F; Ma, Minglin; Bratlie, Kaitlin M; Dang, Tram T; Langer, Robert; Anderson, Daniel G

2011-03-01

The non-specific host response to implanted biomaterials is often a key challenge of medical device design. To evaluate biocompatibility, measuring the release of reactive oxygen species (ROS) produced by inflammatory cells in response to biomaterial surfaces is a well-established method. However, the detection of ROS in response to materials implanted in vivo has not yet been demonstrated. Here, we develop a bioluminescence whole animal imaging approach to observe ROS released in response to subcutaneously-implanted materials in live animals. We compared the real-time generation of ROS in response to two representative materials, polystyrene and alginate, over the course of 28 days. High levels of ROS were observed near polystyrene, but not alginate implants, and persisted throughout the course of 28 days. Histological analysis revealed that high levels of ROS correlated not only with the presence of phagocytic cells at early timepoints, but also fibrosis at later timepoints, suggesting that ROS may be involved in both the acute and chronic phase of the foreign body response. These data are the first in vivo demonstration of ROS generation in response to implanted materials, and describe a novel technique to evaluate the host response. Copyright © 2010 Elsevier Ltd. All rights reserved.

Meeting the Needs of ELLs with Response to Instruction and Intervention: A Mixed Methods Case Study Focusing on the Implementation of Tier 2 Intervention

ERIC Educational Resources Information Center

Nguyen-Quang, Florence

2012-01-01

The purpose of this study was to examine how the Response to Instruction and Intervention (RtI2) framework was implemented at a culturally, ethnically, and linguistically diverse urban school. This study also evaluated the effectiveness of Burst: Early Literacy Intervention (Wireless Generation®, 2009), a Tier 2 intervention program, in regards to…

Earthquake Response of Concrete Gravity Dams Including Hydrodynamic and Foundation Interaction Effects,

DTIC Science & Technology

1980-01-01

standard procedure for Analysis of all types of civil engineering struc- tures. Early in its development, it became apparent that this method had...unique potentialities in the evaluation of stress in dams, and many of its earliest civil engineering applications concerned special problems associated...with such structures [3,4]. The earliest dynamic finite element analyses of civil engineering structures involved the earthquake response analysis of

Method for removal of random noise in eddy-current testing system

DOEpatents

Levy, Arthur J.

1995-01-01

Eddy-current response voltages, generated during inspection of metallic structures for anomalies, are often replete with noise. Therefore, analysis of the inspection data and results is difficult or near impossible, resulting in inconsistent or unreliable evaluation of the structure. This invention processes the eddy-current response voltage, removing the effect of random noise, to allow proper identification of anomalies within and associated with the structure.

Assessing child belt fit, volume II : effect of restraint configuration, booster seat designs, seating procedure, and belt fit on the dynamic response of the hybrid III 10-year-old ATD in sled tests.

DOT National Transportation Integrated Search

2008-09-01

A total of 49 dynamic sled tests were performed with the Hybrid III 10YO to examine issues relating to child belt fit. The goals of these tests were to evaluate ATD response to realistic belt geometries and belt fit, develop methods for accurate, rep...

Optimizing the response to surveillance alerts in automated surveillance systems.

PubMed

Izadi, Masoumeh; Buckeridge, David L

2011-02-28

Although much research effort has been directed toward refining algorithms for disease outbreak alerting, considerably less attention has been given to the response to alerts generated from statistical detection algorithms. Given the inherent inaccuracy in alerting, it is imperative to develop methods that help public health personnel identify optimal policies in response to alerts. This study evaluates the application of dynamic decision making models to the problem of responding to outbreak detection methods, using anthrax surveillance as an example. Adaptive optimization through approximate dynamic programming is used to generate a policy for decision making following outbreak detection. We investigate the degree to which the model can tolerate noise theoretically, in order to keep near optimal behavior. We also evaluate the policy from our model empirically and compare it with current approaches in routine public health practice for investigating alerts. Timeliness of outbreak confirmation and total costs associated with the decisions made are used as performance measures. Using our approach, on average, 80 per cent of outbreaks were confirmed prior to the fifth day of post-attack with considerably less cost compared to response strategies currently in use. Experimental results are also provided to illustrate the robustness of the adaptive optimization approach and to show the realization of the derived error bounds in practice. Copyright © 2011 John Wiley & Sons, Ltd.

The evaluation of (social-)psychological comfort in clothing, a possible approach

NASA Astrophysics Data System (ADS)

Matté, L. L.; Broega, A. C.

2017-10-01

This paper presents the first results of a PhD research on psychological comfort of clothing. In order to understand and conceptualize the psychological aspects of clothing comfort, a variation of the Delphi Method was used to seek opinions from experts. This method was chosen because of its consensus-building features. The results were obtained from a qualitative text analysis, conducted over the experts’ responses to the first round of questions. The analytic process shed some light on the formation of the psychological comfort concept as well as the potential attributes to be evaluated when assessing this comfort dimension.

A method for estimation of bias and variability of continuous gas monitor data: application to carbon monoxide monitor accuracy.

PubMed

Shulman, Stanley A; Smith, Jerome P

2002-01-01

A method is presented for the evaluation of the bias, variability, and accuracy of gas monitors. This method is based on using the parameters for the fitted response curves of the monitors. Thereby, variability between calibrations, between dates within each calibration period, and between different units can be evaluated at several different standard concentrations. By combining variability information with bias information, accuracy can be assessed. An example using carbon monoxide monitor data is provided. Although the most general statistical software required for these tasks is not available on a spreadsheet, when the same number of dates in a calibration period are evaluated for each monitor unit, the calculations can be done on a spreadsheet. An example of such calculations, together with the formulas needed for their implementation, is provided. In addition, the methods can be extended by use of appropriate statistical models and software to evaluate monitor trends within calibration periods, as well as consider the effects of other variables, such as humidity and temperature, on monitor variability and bias.

Evaluation of medical management during a mass casualty incident exercise: an objective assessment tool to enhance direct observation.

PubMed

Ingrassia, Pier Luigi; Prato, Federico; Geddo, Alessandro; Colombo, Davide; Tengattini, Marco; Calligaro, Sara; La Mura, Fabrizio; Franc, Jeffrey Michael; Della Corte, Francesco

2010-11-01

Functional exercises represent an important link between disaster planning and disaster response. Although these exercises are widely performed, no standardized method exists for their evaluation. To describe a simple and objective method to assess medical performance during functional exercise events. An evaluation tool comprising three data fields (triage, clinical maneuvers, and radio usage), accompanied by direct anecdotal observational methods, was used to evaluate a large functional mass casualty incident exercise. Seventeen medical responders managed 112 victims of a simulated building explosion. Although 81% of the patients were assigned the appropriate triage codes, evacuation from the site did not follow in priority. Required maneuvers were performed correctly in 85.2% of airway maneuvers and 78.7% of breathing maneuvers, however, significant under-treatment occurred, possibly due to equipment shortages. Extensive use of radio communication was documented. In evaluating this tool, the structured markers were informative, but further information provided by direct observation was invaluable. A three-part tool (triage, medical maneuvers, and radio usage) can provide a method to evaluate functional mass casualty incident exercises, and is easily implemented. For the best results, it should be used in conjunction with direct observation. The evaluation tool has great potential as a reproducible and internationally recognized tool for evaluating disaster management exercises. Copyright © 2010 Elsevier Inc. All rights reserved.

Mirage events & driver haptic steering alerts in a motion-base driving simulator: A method for selecting an optimal HMI.

PubMed

Talamonti, Walter; Tijerina, Louis; Blommer, Mike; Swaminathan, Radhakrishnan; Curry, Reates; Ellis, R Darin

2017-11-01

This paper describes a new method, a 'mirage scenario,' to support formative evaluation of driver alerting or warning displays for manual and automated driving. This method provides driving contexts (e.g., various Times-To-Collision (TTCs) to a lead vehicle) briefly presented and then removed. In the present study, during each mirage event, a haptic steering display was evaluated. This haptic display indicated a steering response may be initiated to drive around an obstacle ahead. A motion-base simulator was used in a 32-participant study to present vehicle motion cues similar to the actual application. Surprise was neither present nor of concern, as it would be for a summative evaluation of a forward collision warning system. Furthermore, no collision avoidance maneuvers were performed, thereby reducing the risk of simulator sickness. This paper illustrates the mirage scenario procedures, the rating methods and definitions used with the mirage scenario, and analysis of the ratings obtained, together with a multi-attribute utility theory (MAUT) approach to evaluate and select among alternative designs for future summative evaluation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluation of the effect of localized skin cooling on nasal airway volume by acoustic rhinometry.

PubMed

Yamagiwa, M; Hilberg, O; Pedersen, O F; Lundqvist, G R

1990-04-01

Ten healthy subjects (four men and six women) were subjected to localized skin cooling by submersion for 5 min of both feet and, in another experiment, one hand and forearm into ice-cold water. Repeated measurements of nasal cavity volumes by a new method, acoustic rhinometry, showed characteristic patterns ranging from marked increases in volumes lasting the entire exposure period to transient monophasic or biphasic responses to no change at all. The pattern in individual subjects was reproducible with the two methods of cooling, and it could be characterized by five types when related to baseline measurements during the preexposure period. Because of large minute-to-minute variations, probably determined by local differences and fluctuations in blood flow in tissues through the nose, evaluation of induced changes in the nasal cavity volume cannot be based on single measurements as has frequently been done in the past by using rhinomanometry as the experimental method. The mechanisms behind the characteristic patterns in immediate human nasal response to local skin cooling challenge remains to be explored.

Optically Based Rapid Screening Method for Proven Optimal Treatment Strategies Before Treatment Begins

DTIC Science & Technology

2016-08-01

are currently re- evaluating our IHC analysis to provide more refined response data (i.e. proliferation, percent tumor, percent fibrosis, etc.) to test...vitro results (in Fig. 4). We attempted to include only tumor cells in our image analysis, by evaluation of the cellmorphologywith respect to...tomography for evaluation of the activity of lapatinib, a dual inhibitor of the ErbB1 andErbB2 tyrosine kinases, in patients with advanced tumors. Jpn J

Evaluating Realized Impacts of DOE/EERE R&D Programs. Standard impact evaluation method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruegg, Rosalie; O'Connor, Alan C.; Loomis, Ross J.

2014-08-01

This document provides guidance for evaluators who conduct impact assessments of research and development (R&D) programs for the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy (EERE). It is also targeted at EERE program staff responsible for initiating and managing commissioned impact studies. The guide specifies how to estimate economic benefits and costs, energy saved and installed or generated, environmental impacts, energy security impacts, and knowledge impacts of R&D investments in advanced energy technologies.

Evaluation of the site effect with Heuristic Methods

NASA Astrophysics Data System (ADS)

Torres, N. N.; Ortiz-Aleman, C.

2017-12-01

The seismic site response in an area depends mainly on the local geological and topographical conditions. Estimation of variations in ground motion can lead to significant contributions on seismic hazard assessment, in order to reduce human and economic losses. Site response estimation can be posed as a parameterized inversion approach which allows separating source and path effects. The generalized inversion (Field and Jacob, 1995) represents one of the alternative methods to estimate the local seismic response, which involves solving a strongly non-linear multiparametric problem. In this work, local seismic response was estimated using global optimization methods (Genetic Algorithms and Simulated Annealing) which allowed us to increase the range of explored solutions in a nonlinear search, as compared to other conventional linear methods. By using the VEOX Network velocity records, collected from August 2007 to March 2009, source, path and site parameters corresponding to the amplitude spectra of the S wave of the velocity seismic records are estimated. We can establish that inverted parameters resulting from this simultaneous inversion approach, show excellent agreement, not only in terms of adjustment between observed and calculated spectra, but also when compared to previous work from several authors.

Evaluation of space shuttle main engine fluid dynamic frequency response characteristics

NASA Technical Reports Server (NTRS)

Gardner, T. G.

1980-01-01

In order to determine the POGO stability characteristics of the space shuttle main engine liquid oxygen (LOX) system, the fluid dynamic frequency response functions between elements in the SSME LOX system was evaluated, both analytically and experimentally. For the experimental data evaluation, a software package was written for the Hewlett-Packard 5451C Fourier analyzer. The POGO analysis software is documented and consists of five separate segments. Each segment is stored on the 5451C disc as an individual program and performs its own unique function. Two separate data reduction methods, a signal calibration, coherence or pulser signal based frequency response function blanking, and automatic plotting features are included in the program. The 5451C allows variable parameter transfer from program to program. This feature is used to advantage and requires only minimal user interface during the data reduction process. Experimental results are included and compared with the analytical predictions in order to adjust the general model and arrive at a realistic simulation of the POGO characteristics.

Caregiver Appraisals of Functional Dependence in Individuals With Dementia and Associated Caregiver Upset: Psychometric Properties of a New Scale and Response Patterns by Caregiver and Care Recipient Characteristics

PubMed Central

GITLIN, LAURA N.; ROTH, DAVID L.; BURGIO, LOUIS D.; LOEWENSTEIN, DAVID A.; WINTER, LARAINE; NICHOLS, LINDA; ARGÜELLES, SOLEDAD; CORCORAN, MARY; BURNS, ROBERT; MARTINDALE, JENNIFER

2008-01-01

Objective To evaluate psychometric properties and response patterns of the Caregiver Assessment of Function and Upset (CAFU), a 15-item multidimensional measure of dependence in dementia patients and caregiver reaction. Method 640 families were administered the CAFU (53% White, 43% African American, and 4% mixed race and ethnicity). We created a random split of the sample and conducted exploratory factor analyses on Sample 1 and confirmatory factor analyses on Sample 2. Convergent and discriminant validity were evaluated using Spearman rank correlation coefficients. Results A two-factor structure for functional items was derived, and excellent factorial validity was obtained. Convergent and discriminant validity were obtained for function and upset measures. Differential response patterns for dependence and caregiver upset were found for caregiver race, relationship, and care recipient gender but not for caregiver gender. Discussion The CAFU is easily administered, reliable, and valid for evaluating appraisals of dependencies and upsetting care areas. PMID:15750049

Effectiveness of infliximab after adalimumab failure in Crohn's disease

PubMed Central

Chaparro, María; Andreu, Montserrat; Barreiro-de Acosta, Manuel; García-Planella, Esther; Ricart, Elena; Domènech, Eugeni; Esteve, María; Merino, Olga; Nos, Pilar; Peñalva, Mireia; Gisbert, Javier P

2012-01-01

AIM: To evaluate the effectiveness of infliximab as a second-line therapy in Crohn’s disease patients after adalimumab failure. METHODS: A historical cohort study in a community-based gastroenterology practice evaluated Crohn’s disease patients treated with infliximab (induction plus maintenance) after adalimumab failure. Patients were identified using a large Spanish database (ENEIDA). RESULTS: We included 15 Crohn’s disease patients who received infliximab after adalimumab failure. Five patients discontinued adalimumab due to loss of response, 3 due to adverse events and 7 due to partial response. After infliximab therapy was started, all patients who had interrupted adalimumab due to loss of efficacy regained response. All patients who discontinued adalimumab due to adverse events responded to infliximab and maintained this response; one of these patients had an uneventful course on infliximab, but 2 developed adverse events. None of the 7 patients who interrupted adalimumab due to partial response reached remission with infliximab. CONCLUSION: Switching from adalimumab to infliximab may be useful in patients who develop adverse effects or loss of response, however, the benefit of infliximab in primary nonresponders was not established. PMID:23066316

Physiological response of pilots to the LBNP-, flight-, and centrifuge load.

PubMed

Dosel, P; Hanousek, J; Cmiral, J; Petricek, J

1998-07-01

The possibility of the LBNP method's utilization at persons with low resistance of the cardiovascular system to the orthostatic load is a matter one of the research projects of IAM. We concentrated in previous stages our effort on an evaluation of basic physiological responses of the organism to this type of a load and on determination of reliable markers of the precollapse state. After analysis of results of examinations of 64 probands' set we defined qualifying criteria to the prediction for selection of individuals with the insufficient orthostatic resistance. Verification of experimental results by the comparison with well-established examination methods, during a real flight load and at the examination in a human centrifuge, is a goal of the following research activity. In current period of the task's solution the physiological response to an LBNP load has been compared with the physiological response to the load during real flight in an aircraft.

Tumor response estimation in radar-based microwave breast cancer detection.

PubMed

Kurrant, Douglas J; Fear, Elise C; Westwick, David T

2008-12-01

Radar-based microwave imaging techniques have been proposed for early stage breast cancer detection. A considerable challenge for the successful implementation of these techniques is the reduction of clutter, or components of the signal originating from objects other than the tumor. In particular, the reduction of clutter from the late-time scattered fields is required in order to detect small (subcentimeter diameter) tumors. In this paper, a method to estimate the tumor response contained in the late-time scattered fields is presented. The method uses a parametric function to model the tumor response. A maximum a posteriori estimation approach is used to evaluate the optimal values for the estimates of the parameters. A pattern classification technique is then used to validate the estimation. The ability of the algorithm to estimate a tumor response is demonstrated by using both experimental and simulated data obtained with a tissue sensing adaptive radar system.

Structural system identification based on variational mode decomposition

NASA Astrophysics Data System (ADS)

Bagheri, Abdollah; Ozbulut, Osman E.; Harris, Devin K.

2018-03-01

In this paper, a new structural identification method is proposed to identify the modal properties of engineering structures based on dynamic response decomposition using the variational mode decomposition (VMD). The VMD approach is a decomposition algorithm that has been developed as a means to overcome some of the drawbacks and limitations of the empirical mode decomposition method. The VMD-based modal identification algorithm decomposes the acceleration signal into a series of distinct modal responses and their respective center frequencies, such that when combined their cumulative modal responses reproduce the original acceleration response. The decaying amplitude of the extracted modal responses is then used to identify the modal damping ratios using a linear fitting function on modal response data. Finally, after extracting modal responses from available sensors, the mode shape vector for each of the decomposed modes in the system is identified from all obtained modal response data. To demonstrate the efficiency of the algorithm, a series of numerical, laboratory, and field case studies were evaluated. The laboratory case study utilized the vibration response of a three-story shear frame, whereas the field study leveraged the ambient vibration response of a pedestrian bridge to characterize the modal properties of the structure. The modal properties of the shear frame were computed using analytical approach for a comparison with the experimental modal frequencies. Results from these case studies demonstrated that the proposed method is efficient and accurate in identifying modal data of the structures.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quon, Eliot; Platt, Andrew; Yu, Yi-Hsiang

Extreme loads are often a key cost driver for wave energy converters (WECs). As an alternative to exhaustive Monte Carlo or long-term simulations, the most likely extreme response (MLER) method allows mid- and high-fidelity simulations to be used more efficiently in evaluating WEC response to events at the edges of the design envelope, and is therefore applicable to system design analysis. The study discussed in this paper applies the MLER method to investigate the maximum heave, pitch, and surge force of a point absorber WEC. Most likely extreme waves were obtained from a set of wave statistics data based onmore » spectral analysis and the response amplitude operators (RAOs) of the floating body; the RAOs were computed from a simple radiation-and-diffraction-theory-based numerical model. A weakly nonlinear numerical method and a computational fluid dynamics (CFD) method were then applied to compute the short-term response to the MLER wave. Effects of nonlinear wave and floating body interaction on the WEC under the anticipated 100-year waves were examined by comparing the results from the linearly superimposed RAOs, the weakly nonlinear model, and CFD simulations. Overall, the MLER method was successfully applied. In particular, when coupled to a high-fidelity CFD analysis, the nonlinear fluid dynamics can be readily captured.« less

Cooperative learning as applied to resident instruction in radiology reporting.

PubMed

Mueller, Donald; Georges, Alexandra; Vaslow, Dale

2007-12-01

The study is designed to evaluate the effectiveness of an active form of resident instruction, cooperative learning, and the residents' response to that form of instruction. The residents dictated three sets of reports both before and after instruction in radiology reporting using the cooperative learning method. The reports were evaluated for word count, Flesch-Kincaid grade level, advancement on clinical spectrum, clarity, and comparison to prior reports. The reports were evaluated for changes in performance characteristics between the pre- and postinstruction dictations. The residents' response to this form of instruction was evaluated by means of a questionnaire. The instruction was effective in changing the resident dictations. The results became shorter (P<.035), more complex (P<.0126), and demonstrated increased advancement on clinical spectrum (P<.0204). The resident response to this form of instruction was positive. One hundred percent or respondents indicated enjoyment working with their groups. Seventy-five percent stated they would like to participate in more cooperative learning activities. The least positive responses related to the amount of time devoted to the project. Sixty-three percent of respondents stated that the time devoted to the project was appropriate. Cooperative learning can be an effective tool in the setting of the radiology residency. Instructional time requirements must be strongly considered in designing a cooperative learning program.

Mathematical modelling and quantitative methods.

PubMed

Edler, L; Poirier, K; Dourson, M; Kleiner, J; Mileson, B; Nordmann, H; Renwick, A; Slob, W; Walton, K; Würtzen, G

2002-01-01

The present review reports on the mathematical methods and statistical techniques presently available for hazard characterisation. The state of the art of mathematical modelling and quantitative methods used currently for regulatory decision-making in Europe and additional potential methods for risk assessment of chemicals in food and diet are described. Existing practices of JECFA, FDA, EPA, etc., are examined for their similarities and differences. A framework is established for the development of new and improved quantitative methodologies. Areas for refinement, improvement and increase of efficiency of each method are identified in a gap analysis. Based on this critical evaluation, needs for future research are defined. It is concluded from our work that mathematical modelling of the dose-response relationship would improve the risk assessment process. An adequate characterisation of the dose-response relationship by mathematical modelling clearly requires the use of a sufficient number of dose groups to achieve a range of different response levels. This need not necessarily lead to an increase in the total number of animals in the study if an appropriate design is used. Chemical-specific data relating to the mode or mechanism of action and/or the toxicokinetics of the chemical should be used for dose-response characterisation whenever possible. It is concluded that a single method of hazard characterisation would not be suitable for all kinds of risk assessments, and that a range of different approaches is necessary so that the method used is the most appropriate for the data available and for the risk characterisation issue. Future refinements to dose-response characterisation should incorporate more clearly the extent of uncertainty and variability in the resulting output.

Comparative analysis of techniques for evaluating the effectiveness of aircraft computing systems

NASA Technical Reports Server (NTRS)

Hitt, E. F.; Bridgman, M. S.; Robinson, A. C.

1981-01-01

Performability analysis is a technique developed for evaluating the effectiveness of fault-tolerant computing systems in multiphase missions. Performability was evaluated for its accuracy, practical usefulness, and relative cost. The evaluation was performed by applying performability and the fault tree method to a set of sample problems ranging from simple to moderately complex. The problems involved as many as five outcomes, two to five mission phases, permanent faults, and some functional dependencies. Transient faults and software errors were not considered. A different analyst was responsible for each technique. Significantly more time and effort were required to learn performability analysis than the fault tree method. Performability is inherently as accurate as fault tree analysis. For the sample problems, fault trees were more practical and less time consuming to apply, while performability required less ingenuity and was more checkable. Performability offers some advantages for evaluating very complex problems.

Evaluation of critical nuclear power plant electrical cable response to severe thermal fire conditions

NASA Astrophysics Data System (ADS)

Taylor, Gabriel James

The failure of electrical cables exposed to severe thermal fire conditions are a safety concern for operating commercial nuclear power plants (NPPs). The Nuclear Regulatory Commission (NRC) has promoted the use of risk-informed and performance-based methods for fire protection which resulted in a need to develop realistic methods to quantify the risk of fire to NPP safety. Recent electrical cable testing has been conducted to provide empirical data on the failure modes and likelihood of fire-induced damage. This thesis evaluated numerous aspects of the data. Circuit characteristics affecting fire-induced electrical cable failure modes have been evaluated. In addition, thermal failure temperatures corresponding to cable functional failures have been evaluated to develop realistic single point thermal failure thresholds and probability distributions for specific cable insulation types. Finally, the data was used to evaluate the prediction capabilities of a one-dimension conductive heat transfer model used to predict cable failure.

A comparison of 2 methods of endoscopic laryngeal sensory testing: a preliminary study.

PubMed

Kaneoka, Asako; Krisciunas, Gintas P; Walsh, Kayo; Raade, Adele S; Langmore, Susan E

2015-03-01

This study examined the association between laryngeal sensory deficits and penetration or aspiration. Two methods of testing laryngeal sensation were carried out to determine which was more highly correlated with Penetration-Aspiration Scale (PAS) scores. Healthy participants and patients with dysphagia received an endoscopic swallowing evaluation including 2 sequential laryngeal sensory tests-air pulse followed by touch method. Normal/impaired responses were correlated with PAS scores. Fourteen participants completed the endoscopic swallowing evaluation and both sensory tests. The air pulse method identified sensory impairment with greater frequency than the touch method (P<.0001). However, the impairment identified by the air pulse method was not associated with abnormal PAS scores (P=.46). The sensory deficits identified by the touch method were associated with abnormal PAS scores (P=.05). Sensory impairment detected by the air pulse method does not appear to be associated with risk of penetration/aspiration. Significant laryngeal sensory loss revealed by the touch method is associated with compromised airway protection. © The Author(s) 2014.

CD4 T-helper cell cytokine phenotypes and antibody response following tetanus toxoid booster immunization.

PubMed

Livingston, Kimberly A; Jiang, Xiaowen; Stephensen, Charles B

2013-04-30

Routine methods for enumerating antigen-specific T-helper cells may not identify low-frequency phenotypes such as Th2 cells. We compared methods of evaluating such responses to identify tetanus toxoid- (TT) specific Th1, Th2, Th17 and IL10(+) cells. Eight healthy subjects were given a TT booster vaccination. Blood was drawn before, 3, 7, 14, and 28days after vaccination and peripheral blood mononuclear cells (PBMC) were cultured for 7days with TT, negative control (diluent), and a positive control (Staphylococcus enterotoxin B [SEB]). Activation markers (CD25 and CD69) were measured after 44h (n=8), cytokines in supernatant after 3 and 7days, and intracellular cytokine staining (ICS) of proliferated cells (identified by dye dilution) after 7days (n=6). Vaccination increased TT-specific expression of CD25 and CD69 on CD3(+)CD4(+) lymphocytes, and TT-specific proliferation at 7, 14 and 28days post vaccination. Vaccination induced TT-specific Th1 (IFN-γ, TNF-α, and IL-2) Th2 (IL-13, IL-5, and IL-4), Th17 (IL-17A) and IL-10(+) cells as measured by ICS. TT-specific Th1 cells were the most abundant (12-15% of all TT-specific CD4(+) T-cells) while IL10(+) (1.8%) Th17 (1.1%) and Th2 cells (0.2-0.6%) were less abundant. TT-specific cytokine concentrations in PBMC supernatants followed the same pattern where a TT-specific IL-9 response was also seen. In conclusion, TT booster vaccination induced a broad T-helper cell response. This method of evaluating cytokine phenotypes may be useful in examining the impact of nutrition and environmental conditions on the plasticity of T-helper cell memory responses. Published by Elsevier B.V.

Advancing a Model-Validated Statistical Method for Decomposing the Key Oceanic Drivers of Regional Climate: Focus on Northern and Tropical African Climate Variability in the Community Earth System Model (CESM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Fuyao; Yu, Yan; Notaro, Michael

This study advances the practicality and stability of the traditional multivariate statistical method, generalized equilibrium feedback assessment (GEFA), for decomposing the key oceanic drivers of regional atmospheric variability, especially when available data records are short. An advanced stepwise GEFA methodology is introduced, in which unimportant forcings within the forcing matrix are eliminated through stepwise selection. Method validation of stepwise GEFA is performed using the CESM, with a focused application to northern and tropical Africa (NTA). First, a statistical assessment of the atmospheric response to each primary oceanic forcing is carried out by applying stepwise GEFA to a fully coupled controlmore » run. Then, a dynamical assessment of the atmospheric response to individual oceanic forcings is performed through ensemble experiments by imposing sea surface temperature anomalies over focal ocean basins. Finally, to quantify the reliability of stepwise GEFA, the statistical assessment is evaluated against the dynamical assessment in terms of four metrics: the percentage of grid cells with consistent response sign, the spatial correlation of atmospheric response patterns, the area-averaged seasonal cycle of response magnitude, and consistency in associated mechanisms between assessments. In CESM, tropical modes, namely El Niño–Southern Oscillation and the tropical Indian Ocean Basin, tropical Indian Ocean dipole, and tropical Atlantic Niño modes, are the dominant oceanic controls of NTA climate. In complementary studies, stepwise GEFA is validated in terms of isolating terrestrial forcings on the atmosphere, and observed oceanic and terrestrial drivers of NTA climate are extracted to establish an observational benchmark for subsequent coupled model evaluation and development of process-based weights for regional climate projections.« less

Systems Biology and Biomarkers of Early Effects for Occupational Exposure Limit Setting

PubMed Central

DeBord, D. Gayle; Burgoon, Lyle; Edwards, Stephen W.; Haber, Lynne T.; Kanitz, M. Helen; Kuempel, Eileen; Thomas, Russell S.; Yucesoy, Berran

2015-01-01

In a recent National Research Council document, new strategies for risk assessment were described to enable more accurate and quicker assessments.( 1 ) This report suggested that evaluating individual responses through increased use of bio-monitoring could improve dose-response estimations. Identi-fication of specific biomarkers may be useful for diagnostics or risk prediction as they have the potential to improve exposure assessments. This paper discusses systems biology, biomarkers of effect, and computational toxicology approaches and their relevance to the occupational exposure limit setting process. The systems biology approach evaluates the integration of biological processes and how disruption of these processes by chemicals or other hazards affects disease outcomes. This type of approach could provide information used in delineating the mode of action of the response or toxicity, and may be useful to define the low adverse and no adverse effect levels. Biomarkers of effect are changes measured in biological systems and are considered to be preclinical in nature. Advances in computational methods and experimental -omics methods that allow the simultaneous measurement of families of macromolecules such as DNA, RNA, and proteins in a single analysis have made these systems approaches feasible for broad application. The utility of the information for risk assessments from -omics approaches has shown promise and can provide information on mode of action and dose-response relationships. As these techniques evolve, estimation of internal dose and response biomarkers will be a critical test of these new technologies for application in risk assessment strategies. While proof of concept studies have been conducted that provide evidence of their value, challenges with standardization and harmonization still need to be overcome before these methods are used routinely. PMID:26132979

Evaluation of interactive teaching for undergraduate medical students using a classroom interactive response system in India.

PubMed

Datta, Rakesh; Datta, Karuna; Venkatesh, M D

2015-07-01

The classical didactic lecture has been the cornerstone of the theoretical undergraduate medical education. Their efficacy however reduces due to reduced interaction and short attention span of the students. It is hypothesized that the interactive response pad obviates some of these drawbacks. The aim of this study was to evaluate the effectiveness of an interactive response system by comparing it with conventional classroom teaching. A prospective comparative longitudinal study was conducted on 192 students who were exposed to either conventional or interactive teaching over 20 classes. Pre-test, Post-test and retentions test (post 8-12 weeks) scores were collated and statistically analysed. An independent observer measured number of student interactions in each class. Pre-test scores from both groups were similar (p = 0.71). There was significant improvement in both post test scores when compared to pre-test scores in either method (p < 0.001). The interactive post-test score was better than conventional post test score (p < 0.001) by 8-10% (95% CI-difference of means - 8.2%-9.24%-10.3%). The interactive retention test score was better than conventional retention test score (p < 0.001) by 15-18% (95% CI-difference of means - 15.0%-16.64%-18.2%). There were 51 participative events in the interactive group vs 25 in the conventional group. The Interactive Response Pad method was efficacious in teaching. Students taught with the interactive method were likely to score 8-10% higher (statistically significant) in the immediate post class time and 15-18% higher (statistically significant) after 8-12 weeks. The number of student-teacher interactions increases when using the interactive response pads.

Advancing a Model-Validated Statistical Method for Decomposing the Key Oceanic Drivers of Regional Climate: Focus on Northern and Tropical African Climate Variability in the Community Earth System Model (CESM)

DOE PAGES

Wang, Fuyao; Yu, Yan; Notaro, Michael; ...

2017-09-27

This study advances the practicality and stability of the traditional multivariate statistical method, generalized equilibrium feedback assessment (GEFA), for decomposing the key oceanic drivers of regional atmospheric variability, especially when available data records are short. An advanced stepwise GEFA methodology is introduced, in which unimportant forcings within the forcing matrix are eliminated through stepwise selection. Method validation of stepwise GEFA is performed using the CESM, with a focused application to northern and tropical Africa (NTA). First, a statistical assessment of the atmospheric response to each primary oceanic forcing is carried out by applying stepwise GEFA to a fully coupled controlmore » run. Then, a dynamical assessment of the atmospheric response to individual oceanic forcings is performed through ensemble experiments by imposing sea surface temperature anomalies over focal ocean basins. Finally, to quantify the reliability of stepwise GEFA, the statistical assessment is evaluated against the dynamical assessment in terms of four metrics: the percentage of grid cells with consistent response sign, the spatial correlation of atmospheric response patterns, the area-averaged seasonal cycle of response magnitude, and consistency in associated mechanisms between assessments. In CESM, tropical modes, namely El Niño–Southern Oscillation and the tropical Indian Ocean Basin, tropical Indian Ocean dipole, and tropical Atlantic Niño modes, are the dominant oceanic controls of NTA climate. In complementary studies, stepwise GEFA is validated in terms of isolating terrestrial forcings on the atmosphere, and observed oceanic and terrestrial drivers of NTA climate are extracted to establish an observational benchmark for subsequent coupled model evaluation and development of process-based weights for regional climate projections.« less

Systems Biology and Biomarkers of Early Effects for Occupational Exposure Limit Setting.

PubMed

DeBord, D Gayle; Burgoon, Lyle; Edwards, Stephen W; Haber, Lynne T; Kanitz, M Helen; Kuempel, Eileen; Thomas, Russell S; Yucesoy, Berran

2015-01-01

In a recent National Research Council document, new strategies for risk assessment were described to enable more accurate and quicker assessments. This report suggested that evaluating individual responses through increased use of bio-monitoring could improve dose-response estimations. Identification of specific biomarkers may be useful for diagnostics or risk prediction as they have the potential to improve exposure assessments. This paper discusses systems biology, biomarkers of effect, and computational toxicology approaches and their relevance to the occupational exposure limit setting process. The systems biology approach evaluates the integration of biological processes and how disruption of these processes by chemicals or other hazards affects disease outcomes. This type of approach could provide information used in delineating the mode of action of the response or toxicity, and may be useful to define the low adverse and no adverse effect levels. Biomarkers of effect are changes measured in biological systems and are considered to be preclinical in nature. Advances in computational methods and experimental -omics methods that allow the simultaneous measurement of families of macromolecules such as DNA, RNA, and proteins in a single analysis have made these systems approaches feasible for broad application. The utility of the information for risk assessments from -omics approaches has shown promise and can provide information on mode of action and dose-response relationships. As these techniques evolve, estimation of internal dose and response biomarkers will be a critical test of these new technologies for application in risk assessment strategies. While proof of concept studies have been conducted that provide evidence of their value, challenges with standardization and harmonization still need to be overcome before these methods are used routinely.

Predicting Outcomes After Chemo-Embolization in Patients with Advanced-Stage Hepatocellular Carcinoma: An Evaluation of Different Radiologic Response Criteria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gunn, Andrew J., E-mail: agunn@uabmc.edu; Sheth, Rahul A.; Luber, Brandon

2017-01-15

PurposeThe purpse of this study was to evaluate the ability of various radiologic response criteria to predict patient outcomes after trans-arterial chemo-embolization with drug-eluting beads (DEB-TACE) in patients with advanced-stage (BCLC C) hepatocellular carcinoma (HCC).Materials and methodsHospital records from 2005 to 2011 were retrospectively reviewed. Non-infiltrative lesions were measured at baseline and on follow-up scans after DEB-TACE according to various common radiologic response criteria, including guidelines of the World Health Organization (WHO), Response Evaluation Criteria in Solid Tumors (RECIST), the European Association for the Study of the Liver (EASL), and modified RECIST (mRECIST). Statistical analysis was performed to see which,more » if any, of the response criteria could be used as a predictor of overall survival (OS) or time-to-progression (TTP).Results75 patients met inclusion criteria. Median OS and TTP were 22.6 months (95 % CI 11.6–24.8) and 9.8 months (95 % CI 7.1–21.6), respectively. Univariate and multivariate Cox analyses revealed that none of the evaluated criteria had the ability to be used as a predictor for OS or TTP. Analysis of the C index in both univariate and multivariate models showed that the evaluated criteria were not accurate predictors of either OS (C-statistic range: 0.51–0.58 in the univariate model; range: 0.54–0.58 in the multivariate model) or TTP (C-statistic range: 0.55–0.59 in the univariate model; range: 0.57–0.61 in the multivariate model).ConclusionCurrent response criteria are not accurate predictors of OS or TTP in patients with advanced-stage HCC after DEB-TACE.« less

The effects of noise on the cognitive performance of physicians in a hospital emergency department

NASA Astrophysics Data System (ADS)

Dodds, Peter

In this research, the acoustic environment of a contemporary urban hospital emergency department has been characterized. Perceptive and cognitive tests relating to the acoustic environment were conducted on both medical professionals and lay people and a methodology for developing augmentable acoustic simulations from field recordings was developed. While research of healthcare environments remains a popular area of investigation for the acoustics community, a lack of communication between medical and acoustics researchers as well as a lack of sophistication in the methods implemented to evaluate hospital environments and their occupants has led to stagnation. This research attempted to replicate traditional methods for the evaluation of hospital acoustic environments including impulse response based room acoustics measurements as well as psychoacoustic evaluations. This thesis also demonstrates some of the issues associated with conducting such research and provides an outline and implementation for alternative advanced methods of re- search. Advancements include the use of the n-Back test to evaluate the effects of the acoustic environment on cognitive function as well as the outline of a new methodology for implementing realistic immersive simulations for cognitive and perceptual testing using field recordings and signal processing techniques. Additionally, this research utilizes feedback from working emergency medicine physicians to determine the subjective degree of distraction subjects felt in response to a simulated acoustic environment. Results of the room acoustics measurements and all experiments will be presented and analyzed and possible directions for future research will be presented.

An accurate cost effective DFT approach to study the sensing behaviour of polypyrrole towards nitrate ions in gas and aqueous phases.

PubMed

Wasim, Fatima; Mahmood, Tariq; Ayub, Khurshid

2016-07-28

Density functional theory (DFT) calculations have been performed to study the response of polypyrrole towards nitrate ions in gas and aqueous phases. First, an accurate estimate of interaction energies is obtained by methods calibrated against the gold standard CCSD(T) method. Then, a number of low cost DFT methods are also evaluated for their ability to accurately estimate the binding energies of polymer-nitrate complexes. The low cost methods evaluated here include dispersion corrected potential (DCP), Grimme's D3 correction, counterpoise correction of the B3LYP method, and Minnesota functionals (M05-2X). The interaction energies calculated using the counterpoise (CP) correction and DCP methods at the B3LYP level are in better agreement with the interaction energies calculated using the calibrated methods. The interaction energies of an infinite polymer (polypyrrole) with nitrate ions are calculated by a variety of low cost methods in order to find the associated errors. The electronic and spectroscopic properties of polypyrrole oligomers nPy (where n = 1-9) and nPy-NO3(-) complexes are calculated, and then extrapolated for an infinite polymer through a second degree polynomial fit. Charge analysis, frontier molecular orbital (FMO) analysis and density of state studies also reveal the sensing ability of polypyrrole towards nitrate ions. Interaction energies, charge analysis and density of states analyses illustrate that the response of polypyrrole towards nitrate ions is considerably reduced in the aqueous medium (compared to the gas phase).

The use of ex vivo human skin tissue for genotoxicity testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reus, Astrid A.; Usta, Mustafa; Krul, Cyrille A.M., E-mail: cyrille.krul@tno.nl

2012-06-01

As a result of the chemical legislation concerning the registration, evaluation, authorization and restriction of chemicals (REACH), and the Seventh Amendment to the Cosmetics Directive, which prohibits animal testing in Europe for cosmetics, alternative methods for safety evaluation of chemicals are urgently needed. Current in vitro genotoxicity assays are not sufficiently predictive for the in vivo situation, resulting in an unacceptably high number of misleading positives. For many chemicals and ingredients of personal care products the skin is the first site of contact, but there are no in vitro genotoxicity assays available in the skin for additional evaluation of positivemore » or equivocal responses observed in regulatory in vitro genotoxicity assays. In the present study ex vivo human skin tissue obtained from surgery was used for genotoxicity evaluation of chemicals by using the comet assay. Fresh ex vivo human skin tissue was cultured in an air–liquid interface and topically exposed to 20 chemicals, including true positive, misleading positive and true negative genotoxins. Based on the results obtained in the present study, the sensitivity, specificity and accuracy of the ex vivo skin comet assay to predict in vivo genotoxicity were 89%, 90% and 89%, respectively. Donor and experimental variability were mainly reflected in the magnitude of the response and not the difference between the presence and absence of a genotoxic response. The present study indicates that human skin obtained from surgery is a promising and robust model for safety evaluation of chemicals that are in direct contact with the skin. -- Highlights: ► We use human skin obtained from surgery for genotoxicity evaluation of chemicals. ► We use the comet assay as parameter for genotoxicity in ex vivo human skin. ► Sensitivity, specificity and accuracy to predict in vivo genotoxins are determined. ► Sensitivity, specificity and accuracy are 89%, 90% and 90%, respectively. ► The method is suitable for evaluation of chemicals that are in contact with skin.« less

Quantitative evaluation method of the threshold adjustment and the flat field correction performances of hybrid photon counting pixel detectors

NASA Astrophysics Data System (ADS)

Medjoubi, K.; Dawiec, A.

2017-12-01

A simple method is proposed in this work for quantitative evaluation of the quality of the threshold adjustment and the flat-field correction of Hybrid Photon Counting pixel (HPC) detectors. This approach is based on the Photon Transfer Curve (PTC) corresponding to the measurement of the standard deviation of the signal in flat field images. Fixed pattern noise (FPN), easily identifiable in the curve, is linked to the residual threshold dispersion, sensor inhomogeneity and the remnant errors in flat fielding techniques. The analytical expression of the signal to noise ratio curve is developed for HPC and successfully used as a fit function applied to experimental data obtained with the XPAD detector. The quantitative evaluation of the FPN, described by the photon response non-uniformity (PRNU), is measured for different configurations (threshold adjustment method and flat fielding technique) and is demonstrated to be used in order to evaluate the best setting for having the best image quality from a commercial or a R&D detector.

A Novel Health Evaluation Strategy for Multifunctional Self-Validating Sensors

PubMed Central

Shen, Zhengguang; Wang, Qi

2013-01-01

The performance evaluation of sensors is very important in actual application. In this paper, a theory based on multi-variable information fusion is studied to evaluate the health level of multifunctional sensors. A novel conception of health reliability degree (HRD) is defined to indicate a quantitative health level, which is different from traditional so-called qualitative fault diagnosis. To evaluate the health condition from both local and global perspectives, the HRD of a single sensitive component at multiple time points and the overall multifunctional sensor at a single time point are defined, respectively. The HRD methodology is emphasized by using multi-variable data fusion technology coupled with a grey comprehensive evaluation method. In this method, to acquire the distinct importance of each sensitive unit and the sensitivity of different time points, the information entropy and analytic hierarchy process method are used, respectively. In order to verify the feasibility of the proposed strategy, a health evaluating experimental system for multifunctional self-validating sensors was designed. The five different health level situations have been discussed. Successful results show that the proposed method is feasible, the HRD could be used to quantitatively indicate the health level and it does have a fast response to the performance changes of multifunctional sensors. PMID:23291576

Evaluating average and atypical response in radiation effects simulations

NASA Astrophysics Data System (ADS)

Weller, R. A.; Sternberg, A. L.; Massengill, L. W.; Schrimpf, R. D.; Fleetwood, D. M.

2003-12-01

We examine the limits of performing single-event simulations using pre-averaged radiation events. Geant4 simulations show the necessity, for future devices, to supplement current methods with ensemble averaging of device-level responses to physically realistic radiation events. Initial Monte Carlo simulations have generated a significant number of extremal events in local energy deposition. These simulations strongly suggest that proton strikes of sufficient energy, even those that initiate purely electronic interactions, can initiate device response capable in principle of producing single event upset or microdose damage in highly scaled devices.

Lymphoproliferative and Gamma Interferon Responses to Stress-Regulated Mycobacterium avium subsp. paratuberculosis Recombinant Proteins

PubMed Central

Gurung, Ratna B.; Begg, Douglas J.; Purdie, Auriol C.; de Silva, Kumudika; Bannantine, John P.

2014-01-01

Johne's disease in ruminants is a chronic infection of the intestines caused by Mycobacterium avium subsp. paratuberculosis. An important strategy to control disease is early detection, and a potentially efficient method for early detection is measurement of cell-mediated immune responses developed by the host in response to exposure or infection. One method is to measure lymphoproliferation and cytokine release from the host cells when exposed to the organism or parts of the organism. In this study, 10 recombinant M. avium subsp. paratuberculosis proteins known to be upregulated under in vitro stress conditions were evaluated by examining their ability to evoke memory as a result of exposure by vaccination or oral challenge with live Mycobacterium avium subsp. paratuberculosis. Out of 10 proteins, MAP2698c was found to induce higher cell-mediated immune responses in vaccinated and challenged sheep in comparison to healthy controls. The findings suggest that not all stress-regulated proteins have the diagnostic potential to detect cell-mediated immune responses in ovine paratuberculosis. PMID:24695774

Determining bonding, thickness, and density via thermal wave impedance NDE

NASA Technical Reports Server (NTRS)

Green, D. R.

1985-01-01

Bonding, density, and thickness of coatings have a vital effect on their performance in many applications. Pioneering development work on thermal wave nondestructive evaluation (NDE) methods during the past 25 years has resulted in an array of useful techniques for performing bonding, density, and thickness measurements in a practical shop environment. The most useful thermal wave methods for this purpose are based on thermal wave surface impedance measurement or scanning. A pulse of heat from either a thermal transducer or a hot gas pulse is projected onto the surface, and the resulting temperature response is analyzed to unfold the bonding, density, and thickness of the coating. An advanced emissivity independent infrared method was applied to detect the temperature response. These methods were recently completely computerized and can automatically provide information on coating quality in near real-time using the proper equipment. Complex shapes such as turbine blades can be scanned. Microscopic inhomogeneities such as microstructural differences and small, normal, isolated voids do not cause problems but are seen as slight differences in the bulk thermal properties. Test objects with rough surfaces can be effectively nondestructively evaluated using proper thermal surface impedance methods. Some of the basic principles involved, as well as metallographic results illustrating the ability of the thermal wave surface impedance method to detect natural nonbonds under a two-layer thermally sprayed coating, will be presented.

Prediction of seismic collapse risk of steel moment frame mid-rise structures by meta-heuristic algorithms

NASA Astrophysics Data System (ADS)

Jough, Fooad Karimi Ghaleh; Şensoy, Serhan

2016-12-01

Different performance levels may be obtained for sideway collapse evaluation of steel moment frames depending on the evaluation procedure used to handle uncertainties. In this article, the process of representing modelling uncertainties, record to record (RTR) variations and cognitive uncertainties for moment resisting steel frames of various heights is discussed in detail. RTR uncertainty is used by incremental dynamic analysis (IDA), modelling uncertainties are considered through backbone curves and hysteresis loops of component, and cognitive uncertainty is presented in three levels of material quality. IDA is used to evaluate RTR uncertainty based on strong ground motion records selected by the k-means algorithm, which is favoured over Monte Carlo selection due to its time saving appeal. Analytical equations of the Response Surface Method are obtained through IDA results by the Cuckoo algorithm, which predicts the mean and standard deviation of the collapse fragility curve. The Takagi-Sugeno-Kang model is used to represent material quality based on the response surface coefficients. Finally, collapse fragility curves with the various sources of uncertainties mentioned are derived through a large number of material quality values and meta variables inferred by the Takagi-Sugeno-Kang fuzzy model based on response surface method coefficients. It is concluded that a better risk management strategy in countries where material quality control is weak, is to account for cognitive uncertainties in fragility curves and the mean annual frequency.

Investigation of optimized graded concrete for Oklahoma.

DOT National Transportation Integrated Search

2013-07-01

This report presents the results of several novel test methods to investigate concrete for slip formed paving. These tests include the Box Test, a novel test to evaluate the response of concrete to vibration, the AIMS2, an automated test for aggregat...

Evaluating the Toxicity Pathways Using High-Throughput Environmental Chemical Data

EPA Science Inventory

The application of HTS methods to the characterization of human phenotypic response to environmental chemicals is a largely unexplored area of pharmacogenomics. The U.S. Environmental Protection Agency (EPA), through its ToxCast program, is developing predictive toxicity approach...

A rating system for the esthetics of bridges.

DOT National Transportation Integrated Search

1980-01-01

There is a need for a tangible way to evaluate the esthetic or visual characteristics of bridges. This report describes such a method based on a numerical experiential rating scale of -10 to +10. Negative values represent unpleasurable responses; pos...

EVALUATION OF OPTICAL DETECTION METHODS FOR WATERBORNE SUSPENSIONS

EPA Science Inventory

Turbidimeters and optical paricle counters (OPCs) are used to monitor particulate matter in water. The response from these instruments is governed by the optical properties of the suspension and the instrument design. The recommended design criteria for turbidimeters allows for l...

Control of oil spills in high speed currents : a technology assessment

DOT National Transportation Integrated Search

1999-05-01

A technology assessment has been conducted to analyze the threat of oil spills in fast currents. Technologies and methods for response were evaluated, and promising equipment and strategies were identified. Recommendations are made to pursue those me...

30 CFR 553.28 - What financial test procedures must I use to evaluate the amount of self-insurance allowed as...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 553.28 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL SPILL FINANCIAL RESPONSIBILITY FOR OFFSHORE FACILITIES Methods for Demonstrating OSFR § 553.28 What...

30 CFR 553.28 - What financial test procedures must I use to evaluate the amount of self-insurance allowed as...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 553.28 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL SPILL FINANCIAL RESPONSIBILITY FOR OFFSHORE FACILITIES Methods for Demonstrating OSFR § 553.28 What...

30 CFR 553.28 - What financial test procedures must I use to evaluate the amount of self-insurance allowed as...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 553.28 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL SPILL FINANCIAL RESPONSIBILITY FOR OFFSHORE FACILITIES Methods for Demonstrating OSFR § 553.28 What...

Probabilistic structural analysis methods of hot engine structures

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Hopkins, D. A.

1989-01-01

Development of probabilistic structural analysis methods for hot engine structures at Lewis Research Center is presented. Three elements of the research program are: (1) composite load spectra methodology; (2) probabilistic structural analysis methodology; and (3) probabilistic structural analysis application. Recent progress includes: (1) quantification of the effects of uncertainties for several variables on high pressure fuel turbopump (HPFT) turbine blade temperature, pressure, and torque of the space shuttle main engine (SSME); (2) the evaluation of the cumulative distribution function for various structural response variables based on assumed uncertainties in primitive structural variables; and (3) evaluation of the failure probability. Collectively, the results demonstrate that the structural durability of hot engine structural components can be effectively evaluated in a formal probabilistic/reliability framework.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mimura, Hidefumi, E-mail: mimura@marianna-u.ac.jp; Arai, Yasuaki, E-mail: arai-y3111@mvh.biglobe.ne.jp; Yamakado, Koichiro, E-mail: yama@clin.medic.mie-u.ac.jp

PurposeThis multicenter phase I/II study evaluated the safety, feasibility, and initial efficacy of radiofrequency ablation (RFA) for small malignant renal tumors.MethodsThirty-three patients were enrolled in the study. A single session of RFA was performed in patients with a renal tumor of 1–3 cm in greatest diameter, with the exception of lesions adjacent to the renal hilum. The primary endpoint was the safety of renal RFA, and the secondary endpoints were its feasibility and initial efficacy for local control, as well as the incidence and grade of adverse events. Clinical efficacy was evaluated by CT scans within 1 week and at a furthermore » 4 weeks after the procedure using the criteria adapted from the Response Evaluation Criteria in Solid Tumors.ResultsThe RFA procedure was completed in 100 % (95 % confidence interval [CI] 89–100 %) of all 33 patients. There were no severe adverse events (0 % [95 % CI 0–11 %]). Among the 33 patients, a complete response, partial response, progressive disease, and stable disease were seen in 28 (85 %), 0 (0 %), one (3 %), and one (3 %) patient(s), respectively, with a tumor response rate of 85 % [95 % CI 68–95 %]). Three patients (9 %), including one ineligible patient (3 %), were not evaluable. Out of 30 evaluable patients, a complete response was achieved in 28 (93 %).ConclusionThe current multicenter trial revealed that RFA is a safe, feasible, and effective treatment for small malignant renal tumors in patients who are not candidates for surgery.« less