Structured Analysis of the Logistics Support Analysis (LSA) Task, and Integrated Logistic Support (ILS) Element, ’Standardization and Interoperability (S and I)’.

DTIC Science & Technology

1988-11-01

system, using graphic techniques which enable users, analysts, and designers to get a clear and common picture of the system and how its parts fit...boxes into hierarchies suitable for computer implementation. ŗ. Structured Design uses tools, especially graphic ones, to render systems readily...LSA, PROCESSES, DATA FLOWS, DATA STORES, EX"RNAL ENTITIES, OVERALL SYSTEMS DESIGN PROCESS, over 19, ABSTRACT (Continue on reverse if necessary and

Analysis of efficiency of waste reverse logistics for recycling.

PubMed

Veiga, Marcelo M

2013-10-01

Brazil is an agricultural country with the highest pesticide consumption in the world. Historically, pesticide packaging has not been disposed of properly. A federal law requires the chemical industry to provide proper waste management for pesticide-related products. A reverse logistics program was implemented, which has been hailed a great success. This program was designed to target large rural communities, where economy of scale can take place. Over the last 10 years, the recovery rate has been very poor in most small rural communities. The objective of this study was to analyze the case of this compulsory reverse logistics program for pesticide packaging under the recent Brazilian Waste Management Policy, which enforces recycling as the main waste management solution. This results of this exploratory research indicate that despite its aggregate success, the reverse logistics program is not efficient for small rural communities. It is not possible to use the same logistic strategy for small and large communities. The results also indicate that recycling might not be the optimal solution, especially in developing countries with unsatisfactory recycling infrastructure and large transportation costs. Postponement and speculation strategies could be applied for improving reverse logistics performance. In most compulsory reverse logistics programs, there is no economical solution. Companies should comply with the law by ranking cost-effective alternatives.

Reverse bifurcation and fractal of the compound logistic map

NASA Astrophysics Data System (ADS)

Wang, Xingyuan; Liang, Qingyong

2008-07-01

The nature of the fixed points of the compound logistic map is researched and the boundary equation of the first bifurcation of the map in the parameter space is given out. Using the quantitative criterion and rule of chaotic system, the paper reveal the general features of the compound logistic map transforming from regularity to chaos, the following conclusions are shown: (1) chaotic patterns of the map may emerge out of double-periodic bifurcation and (2) the chaotic crisis phenomena and the reverse bifurcation are found. At the same time, we analyze the orbit of critical point of the compound logistic map and put forward the definition of Mandelbrot-Julia set of compound logistic map. We generalize the Welstead and Cromer's periodic scanning technology and using this technology construct a series of Mandelbrot-Julia sets of compound logistic map. We investigate the symmetry of Mandelbrot-Julia set and study the topological inflexibility of distributing of period region in the Mandelbrot set, and finds that Mandelbrot set contain abundant information of structure of Julia sets by founding the whole portray of Julia sets based on Mandelbrot set qualitatively.

Reverse logistics system and recycling potential at a landfill: A case study from Kampala City.

PubMed

Kinobe, J R; Gebresenbet, G; Niwagaba, C B; Vinnerås, B

2015-08-01

The rapid growing population and high urbanisation rates in Sub-Saharan Africa has caused enormous pressure on collection services of the generated waste in the urban areas. This has put a burden on landfilling, which is the major waste disposal method. Waste reduction, re-use and recycling opportunities exist but are not fully utilized. The common items that are re-used and re-cycled are plastics, paper, aluminum, glass, steel, cardboard, and yard waste. This paper develops an overview of reverse logistics at Kiteezi landfill, the only officially recognised waste disposal facility for Kampala City. The paper analyses, in details the collection, re-processing, re-distribution and final markets of these products into a reversed supply chain network. Only 14% of the products at Kiteezi landfill are channeled into the reverse chain while 63% could be included in the distribution chain but are left out and disposed of while the remaining 23% is buried. This is because of the low processing power available, lack of market value, lack of knowledge and limited value addition activities to the products. This paper proposes possible strategies of efficient and effective reverse logistics development, applicable to Kampala City and other similar cities. Copyright © 2015 Elsevier Ltd. All rights reserved.

Designing a multistage supply chain in cross-stage reverse logistics environments: application of particle swarm optimization algorithms.

PubMed

Chiang, Tzu-An; Che, Z H; Cui, Zhihua

2014-01-01

This study designed a cross-stage reverse logistics course for defective products so that damaged products generated in downstream partners can be directly returned to upstream partners throughout the stages of a supply chain for rework and maintenance. To solve this reverse supply chain design problem, an optimal cross-stage reverse logistics mathematical model was developed. In addition, we developed a genetic algorithm (GA) and three particle swarm optimization (PSO) algorithms: the inertia weight method (PSOA_IWM), V(Max) method (PSOA_VMM), and constriction factor method (PSOA_CFM), which we employed to find solutions to support this mathematical model. Finally, a real case and five simulative cases with different scopes were used to compare the execution times, convergence times, and objective function values of the four algorithms used to validate the model proposed in this study. Regarding system execution time, the GA consumed more time than the other three PSOs did. Regarding objective function value, the GA, PSOA_IWM, and PSOA_CFM could obtain a lower convergence value than PSOA_VMM could. Finally, PSOA_IWM demonstrated a faster convergence speed than PSOA_VMM, PSOA_CFM, and the GA did.

Designing a Multistage Supply Chain in Cross-Stage Reverse Logistics Environments: Application of Particle Swarm Optimization Algorithms

PubMed Central

Chiang, Tzu-An; Che, Z. H.

2014-01-01

This study designed a cross-stage reverse logistics course for defective products so that damaged products generated in downstream partners can be directly returned to upstream partners throughout the stages of a supply chain for rework and maintenance. To solve this reverse supply chain design problem, an optimal cross-stage reverse logistics mathematical model was developed. In addition, we developed a genetic algorithm (GA) and three particle swarm optimization (PSO) algorithms: the inertia weight method (PSOA_IWM), V Max method (PSOA_VMM), and constriction factor method (PSOA_CFM), which we employed to find solutions to support this mathematical model. Finally, a real case and five simulative cases with different scopes were used to compare the execution times, convergence times, and objective function values of the four algorithms used to validate the model proposed in this study. Regarding system execution time, the GA consumed more time than the other three PSOs did. Regarding objective function value, the GA, PSOA_IWM, and PSOA_CFM could obtain a lower convergence value than PSOA_VMM could. Finally, PSOA_IWM demonstrated a faster convergence speed than PSOA_VMM, PSOA_CFM, and the GA did. PMID:24772026

Reverse logistics in the Brazilian construction industry.

PubMed

Nunes, K R A; Mahler, C F; Valle, R A

2009-09-01

In Brazil most Construction and Demolition Waste (C&D waste) is not recycled. This situation is expected to change significantly, since new federal regulations oblige municipalities to create and implement sustainable C&D waste management plans which assign an important role to recycling activities. The recycling organizational network and its flows and components are fundamental to C&D waste recycling feasibility. Organizational networks, flows and components involve reverse logistics. The aim of this work is to introduce the concepts of reverse logistics and reverse distribution channel networks and to study the Brazilian C&D waste case.

Logistics, electronic commerce, and the environment

NASA Astrophysics Data System (ADS)

Sarkis, Joseph; Meade, Laura; Talluri, Srinivas

2002-02-01

Organizations realize that a strong supporting logistics or electronic logistics (e-logistics) function is important from both commercial and consumer perspectives. The implications of e-logistics models and practices cover the forward and reverse logistics functions of organizations. They also have direct and profound impact on the natural environment. This paper will focus on a discussion of forward and reverse e-logistics and their relationship to the natural environment. After discussion of the many pertinent issues in these areas, directions of practice and implications for study and research are then described.

Research on reverse logistics location under uncertainty environment based on grey prediction

NASA Astrophysics Data System (ADS)

Zhenqiang, Bao; Congwei, Zhu; Yuqin, Zhao; Quanke, Pan

This article constructs reverse logistic network based on uncertain environment, integrates the reverse logistics network and distribution network, and forms a closed network. An optimization model based on cost is established to help intermediate center, manufacturing center and remanufacturing center make location decision. A gray model GM (1, 1) is used to predict the product holdings of the collection points, and then prediction results are carried into the cost optimization model and a solution is got. Finally, an example is given to verify the effectiveness and feasibility of the model.

A Multi-Stage Reverse Logistics Network Problem by Using Hybrid Priority-Based Genetic Algorithm

NASA Astrophysics Data System (ADS)

Lee, Jeong-Eun; Gen, Mitsuo; Rhee, Kyong-Gu

Today remanufacturing problem is one of the most important problems regarding to the environmental aspects of the recovery of used products and materials. Therefore, the reverse logistics is gaining become power and great potential for winning consumers in a more competitive context in the future. This paper considers the multi-stage reverse Logistics Network Problem (m-rLNP) while minimizing the total cost, which involves reverse logistics shipping cost and fixed cost of opening the disassembly centers and processing centers. In this study, we first formulate the m-rLNP model as a three-stage logistics network model. Following for solving this problem, we propose a Genetic Algorithm pri (GA) with priority-based encoding method consisting of two stages, and introduce a new crossover operator called Weight Mapping Crossover (WMX). Additionally also a heuristic approach is applied in the 3rd stage to ship of materials from processing center to manufacturer. Finally numerical experiments with various scales of the m-rLNP models demonstrate the effectiveness and efficiency of our approach by comparing with the recent researches.

The management challenge for household waste in emerging economies like Brazil: realistic source separation and activation of reverse logistics.

PubMed

Fehr, M

2014-09-01

Business opportunities in the household waste sector in emerging economies still evolve around the activities of bulk collection and tipping with an open material balance. This research, conducted in Brazil, pursued the objective of shifting opportunities from tipping to reverse logistics in order to close the balance. To do this, it illustrated how specific knowledge of sorted waste composition and reverse logistics operations can be used to determine realistic temporal and quantitative landfill diversion targets in an emerging economy context. Experimentation constructed and confirmed the recycling trilogy that consists of source separation, collection infrastructure and reverse logistics. The study on source separation demonstrated the vital difference between raw and sorted waste compositions. Raw waste contained 70% biodegradable and 30% inert matter. Source separation produced 47% biodegradable, 20% inert and 33% mixed material. The study on collection infrastructure developed the necessary receiving facilities. The study on reverse logistics identified private operators capable of collecting and processing all separated inert items. Recycling activities for biodegradable material were scarce and erratic. Only farmers would take the material as animal feed. No composting initiatives existed. The management challenge was identified as stimulating these activities in order to complete the trilogy and divert the 47% source-separated biodegradable discards from the landfills. © The Author(s) 2014.

Reverse Logistics

DTIC Science & Technology

2001-05-01

reverse logistics was to pick up the damage or obsolete items from the vendor and discard them into a land fill. Estee Lauder Companies, Inc. dumped as...Quality Center, Benchmarking and Leveraging “Best Practices” Strategies , Houston, TX, AQPC, 1995. 2. Brauner, Marygail, “Evaluating Five Proposed Price

77 FR 39662 - Hazardous Materials; Reverse Logistics (RRR)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-05

... used batteries from multiple shippers for the purposes of recycling. The petition also notes that, when... recycling falls within the realm of ``reverse logistics.'' Currently Sec. 173.159(e)(4) prevents a battery... comment on how the retail industry should handle the recycling or disposal of these batteries for use in...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kwasniewski, Bartosz K

The construction of reversible extensions of dynamical systems presented in a previous paper by the author and A.V. Lebedev is enhanced, so that it applies to arbitrary mappings (not necessarily with open range). It is based on calculating the maximal ideal space of C*-algebras that extends endomorphisms to partial automorphisms via partial isometric representations, and involves a new set of 'parameters' (the role of parameters is played by chosen sets or ideals). As model examples, we give a thorough description of reversible extensions of logistic maps and a classification of systems associated with compression of unitaries generating homeomorphisms of themore » circle. Bibliography: 34 titles.« less

Impact of RFID Information-Sharing Coordination over a Supply Chain with Reverse Logistics

ERIC Educational Resources Information Center

Nativi Nicolau, Juan Jose

2016-01-01

Companies have adopted environmental practices such as reverse logistics over the past few decades. However, studies show that aligning partners inside the green supply chain can be a substantial problem. This lack of coordination can increase overall supply chain cost. Information technology such as Radio Frequency Identification (RFID) has the…

A Food Chain Algorithm for Capacitated Vehicle Routing Problem with Recycling in Reverse Logistics

NASA Astrophysics Data System (ADS)

Song, Qiang; Gao, Xuexia; Santos, Emmanuel T.

2015-12-01

This paper introduces the capacitated vehicle routing problem with recycling in reverse logistics, and designs a food chain algorithm for it. Some illustrative examples are selected to conduct simulation and comparison. Numerical results show that the performance of the food chain algorithm is better than the genetic algorithm, particle swarm optimization as well as quantum evolutionary algorithm.

ARES: A System for Real-Time Operational and Tactical Decision Support

DTIC Science & Technology

1986-12-01

In B]LE LCLGf. 9 NAVAL POSTGRADUATE SCHOOL Monterey, California Vi,-. %*.. THESIS - ’ A RE S A SYSTEM -OR REAL- 1I I .-.. --- OPERATIONAL AND...able) aval Postgraduate School 54 Naval Postgraduate School NN DRESS (City,. State,. and ZIP Code) 7b ADDRESS (City,. State,. and ZIP Code...SUBJECT TERMS (Continue on reverse if necessaty and identify by block number) LD GROUP SUB-GROUP Decision Support System, Logistics Model, Operational

Building of Reusable Reverse Logistics Model and its Optimization Considering the Decision of Backorder or Next Arrival of Goods

NASA Astrophysics Data System (ADS)

Lee, Jeong-Eun; Gen, Mitsuo; Rhee, Kyong-Gu; Lee, Hee-Hyol

This paper deals with the building of the reusable reverse logistics model considering the decision of the backorder or the next arrival of goods. The optimization method to minimize the transportation cost and to minimize the volume of the backorder or the next arrival of goods occurred by the Just in Time delivery of the final delivery stage between the manufacturer and the processing center is proposed. Through the optimization algorithms using the priority-based genetic algorithm and the hybrid genetic algorithm, the sub-optimal delivery routes are determined. Based on the case study of a distilling and sale company in Busan in Korea, the new model of the reusable reverse logistics of empty bottles is built and the effectiveness of the proposed method is verified.

Control of nonlinear systems using periodic parametric perturbations with application to a reversed field pinch

NASA Astrophysics Data System (ADS)

Mirus, Kevin Andrew

In this thesis, the possibility of controlling low- and high-dimensional chaotic systems by periodically driving an accessible system parameter is examined. This method has been carried out on several numerical systems and the MST Reversed Field Pinch. The numerical systems investigated include the logistic equation, the Lorenz equations, the Rossler equations, a coupled lattice of logistic equations, a coupled lattice of Lorenz equations, the Yoshida equations, which model tearing mode fluctuations in a plasma, and a neural net model for magnetic fluctuations on MST. This method was tested on the MST by sinusoidally driving a magnetic flux through the toroidal gap of the device. Numerically, periodic drives were found to be most effective at producing limit cycle behavior or significantly reducing the dimension of the system when the perturbation frequency was near natural frequencies of unstable periodic orbits embedded in the attractor of the unperturbed system. Several different unstable periodic orbits have been stabilized in this way for the low-dimensional numerical systems, sometimes with perturbation amplitudes that were less than 5% of the nominal value of the parameter being perturbed. In high- dimensional systems, limit cycle behavior and significant decreases in the system dimension were also achieved using perturbations with frequencies near the natural unstable periodic orbit frequencies. Results for the MST were not this encouraging, most likely because of an insufficient drive amplitude, the extremely high dimension of the plasma behavior, large amounts of noise, and a lack of stationarity in the transient plasma pulses.

Pharmacopollution and Household Waste Medicine (HWM): how reverse logistics is environmentally important to Brazil.

PubMed

Pereira, André Luiz; de Vasconcelos Barros, Raphael Tobias; Pereira, Sandra Rosa

2017-11-01

Pharmacopollution is a public health and environmental outcome of some active pharmaceutical ingredients (API) and endocrine-disrupting compounds (EDC) dispersed through water and/or soil. Its most important sources are the pharmaceutical industry, healthcare facilities (e.g., hospitals), livestock, aquaculture, and households (patients' excretion and littering). The last source is the focus of this article. Research questions are "What is the Household Waste Medicine (HWM) phenomenon?", "How HWM and pharmacopollution are related?", and "Why is a reverse logistic system necessary for HWM in Brazil?" This article followed the seven steps proposed by Rother (2007) for a systematic review based on the Cochrane Handbook and the National Health Service (NHS) Center for Reviews Dissemination (CDR) Report. The HWM phenomenon brings many environmental, public health, and, social challenges. The insufficient data is a real challenge to assessing potential human health risks and API concentrations. Therefore, the hazard of long-term exposure to low concentrations of pharmacopollutants and the combined effects of API mixtures is still uncertain. HWM are strongly related to pharmacopollution, as this review shows. The Brazilian HWM case is remarkable because it is the fourth pharmaceutical market (US$ 65,971 billion), with a wide number of private pharmacies and drugstores (3.3: 10,000 pharmacy/inhabitants), self-medication habits, and no national take-back program. The HWM generation is estimated in 56.6 g/per capita, or 10,800 t/year. The absence of a reverse logistics for HWM can lead to serious environmental and public health challenges. The sector agreement for HWM is currently under public consultation.

Naval Supply Systems Command Fleet Logistics Center

DTIC Science & Technology

2012-08-08

Partial small business set - aside is a potential consideration   12-month Base plus two options   Synopsis N00604-11-R-3006 on NECO and FedBizOpps...2012 Navy Gold Coast Small Business Procurement Event 8 August 2012 #1 PRIORITY = Operating Forces Support …while ensuring Joint...while ensuring Joint Base Success FedBid.com Reverse Auction Website 8 Small Business Assistance #1 PRIORITY = Operating Forces

Empirical research on coordination evaluation and sustainable development mechanism of regional logistics and new-type urbanization: a panel data analysis from 2000 to 2015 for Liaoning Province in China.

PubMed

Sun, Qiang

2017-06-01

As the largest developing country in the world, China has witnessed fast-paced urbanization over the past three decades with rapid economic growth. In fact, urbanization has been not only shown to promote economic growth and improve the livelihood of people but also can increase demands of regional logistics. Therefore, a better understanding of the relationship between urbanization and regional logistics is important for China's future sustainable development. The development of urban residential area and heterogeneous, modern society as well regional logistics are running two abreast. The regional logistics can promote the development of new-type urbanization jointly by promoting industrial concentration and logistics demand, enhancing the residents' quality of life and improving the infrastructure and logistics technology. In this paper, the index system and evaluation model for evaluating the development of regional logistics and the new-type urbanization are constructed. Further, the econometric analysis is utilized such as correlation analysis, co-integration test, and error correction model to explore relationships of the new-type urbanization development and regional logistics development in Liaoning Province. The results showed that there was a long-term stable equilibrium relationship between the new-type urbanization and regional logistics. The findings have important implications for Chinese policymakers that on the path towards a sustainable urbanization and regional reverse, this must be taken into consideration. The paper concludes providing some strategies that might be helpful to the policymakers in formulating development policies for sustainable urbanization.

System dynamics applied to closed loop supply chains of desktops and laptops in Brazil: A perspective for social inclusion of waste pickers.

PubMed

Ghisolfi, Verônica; Diniz Chaves, Gisele de Lorena; Ribeiro Siman, Renato; Xavier, Lúcia Helena

2017-02-01

The structure of reverse logistics for waste electrical and electronic equipment (WEEE) is essential to minimize the impacts of their improper disposal. In this context, the Brazilian Solid Waste Policy (BSWP) was a regulatory milestone in Brazil, submitting WEEE to the mandatory implementation of reverse logistics systems, involving the integration of waste pickers on the shared responsibility for the life cycle of products. This article aims to measure the impact of such legal incentives and the bargaining power obtained by the volume of collected waste on the effective formalization of waste pickers. The proposed model evaluates the sustainability of supply chains in terms of the use of raw materials due to disposal fees, collection, recycling and return of some materials from desktops and laptops using system dynamics methodology. The results show that even in the absence of bargaining power, the formalization of waste pickers occurs due to legal incentives. It is important to ensure the waste pickers cooperatives access to a minimum amount, which requires a level of protection against unfair competition with companies. Regarding the optimal level of environmental policies, even though the formalization time is long, it is still not enough to guarantee the formalization of waste picker cooperatives, which is dependent on their bargaining power. Steel is the material with the largest decrease in acquisition rate of raw material. Copyright © 2016 Elsevier Ltd. All rights reserved.

A 4 K tactical cryocooler using reverse-Brayton machines

NASA Astrophysics Data System (ADS)

Zagarola, M.; Cragin, K.; McCormick, J.; Hill, R.

2017-12-01

Superconducting electronics and spectral-spatial holography have the potential to revolutionize digital communications, but must operate at cryogenic temperatures, near 4 K. Liquid helium is undesirable for military missions due to logistics and scarcity, and commercial low temperature cryocoolers are unable to meet size, weight, power, and environmental requirements for many missions. To address this need, Creare is developing a reverse turbo-Brayton cryocooler that provides refrigeration at 4.2 K and rejects heat at 77 K to an upper-stage cryocooler or through boil-off of liquid nitrogen. The cooling system is predicted to reduce size, weight, and input power by at least an order of magnitude as compared to the current state-of-the-art 4.2 K cryocooler. For systems utilizing nitrogen boil-off, the boil-off rate is reasonable. This paper reviews the design of the cryocooler, the key components, and component test results.

E-waste management and sustainability: a case study in Brazil.

PubMed

Azevedo, Luís Peres; da Silva Araújo, Fernando Gabriel; Lagarinhos, Carlos Alberto Ferreira; Tenório, Jorge Alberto Soares; Espinosa, Denise Crocce Romano

2017-11-01

The advancement of technology and development of new electronic and electrical equipment with a reduced life cycle has increased the need for the disposal of them (called Waste of Electric and Electronic Equipment or simply e-waste) due to defects presented during use, replacement of obsolete equipment, and ease of acquisition of new equipment. There is a lack of consumer awareness regarding the use, handling storage, and disposal of this equipment. In Brazil, the disposal of post-consumer waste is regulated by the National Solid Waste Policy, established by Law No. 12305 and regulated on the 23rd December 2010. Under this legislation, manufacturers and importers are required to perform a project for the Reverse Logistics of e-waste, though its implementation is not well defined. This work focuses on the verification of the sustainability of reverse logistics suggested by the legislation and the mandatory points, evaluating its costs and the possible financial gain with recycling of the waste. The management of reverse logistics and recycling of waste electrical and electronic equipment, or simply recycling of e-waste, as suggested by the government, will be the responsibility of the managing organization to be formed by the manufacturers/importers in Brazil.

Stakeholder engagement in quattro helix model for mobile phone reverse logistics in Indonesia: a conceptual framework

NASA Astrophysics Data System (ADS)

Maheswari, H.; Yudoko, G.; Adhiutama, A.

2017-12-01

The number of e-waste from mobile phone industry is still dominating until now. This is happened because there is no mutual commitment from all of parties i.e. businesses, government, and societies to reduce the use of mobile phone that has the shortest product life cycle. There are many researches study about firms’ motivation and government’s role, other discuss about actions of communities in supporting reverse logistics implementation. Unfortunately, research about engagement mechanism that involving all parties is still rare. Therefore, it is important to find the engagement model through this conceptual paper and it is expected useful to build the novel model. Through literature review, the results of this research are establishing the Quattro helix model as the appropriate structure to build the robust team by exploring stakeholder theories; mapping the engagement model either in form of collaboration or participation that consider stakeholders’ role and motivation and finding six types of engagement that consider their interest; and determining the novel model of engagement through Quattro helix model for implementing reverse logistics in handling e-waste by describing the linkage and the gaps among existing model.

A universal approach to the study of nonlinear systems

NASA Astrophysics Data System (ADS)

Hwa, Rudolph C.

2004-07-01

A large variety of nonlinear systems have been treated by a common approach that emphasizes the fluctuation of spatial patterns. By using the same method of analysis it is possible to discuss the chaotic behaviors of quark jets and logistic map in the same language. Critical behaviors of quark-hadron phase transition in heavy-ion collisions and of photon production at the threshold of lasing can also be described by a common scaling behavior. The universal approach also makes possible an insight into the recently discovered phenomenon of wind reversal in cryogenic turbulence as a manifestation of self-organized criticality.

Prioritizing critical success factors for reverse logistics implementation using fuzzy-TOPSIS methodology

NASA Astrophysics Data System (ADS)

Agrawal, Saurabh; Singh, Rajesh K.; Murtaza, Qasim

2016-03-01

Electronics industry is one of the fastest growing industries in the world. In India also, there are high turnovers and growing demand of electronics product especially after post liberalization in early nineties. These products generate e-waste which has become big environmental issue. Industries can handle these e-waste and product returns efficiently by developing reverse logistics (RL) system. A thorough study of critical success factors (CSFs) and their ordered implementation is essential for successful RL implementation. The aim of the study is to review the CSFs, and to prioritize them for RL implementation in Indian electronics industry. Twelve CSFs were identified through literature review, and discussion with the experts from the Indian electronics industry. Fuzzy-Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) approach is proposed for prioritizing these CSFs. Perusal of literature indicates that fuzzy-TOPSIS has not been applied earlier for prioritization of CSFs in Indian electronics industry. Five Indian electronics companies were selected for evaluation of this methodology. Results indicate that most of the identified factors are crucial for the RL implementation. Top management awareness, resource management, economic factors, and contracts terms and conditions are top four prioritized factor, and process capabilities and skilled workers is the least prioritized factor. The findings will be useful for successful RL implementation in Indian electronics industry.

Real-world evaluation of the effectiveness of reversing camera and parking sensor technologies in preventing backover pedestrian injuries.

PubMed

Keall, M D; Fildes, B; Newstead, S

2017-02-01

Backover injuries to pedestrians are a significant road safety issue, but their prevalence is underestimated as the majority of such injuries are often outside the scope of official road injury recording systems, which just focus on public roads. Based on experimental evidence, reversing cameras have been found to be effective in reducing the rate of collisions when reversing; the evidence for the effectiveness of reverse parking sensors has been mixed. The wide availability of these technologies in recent model vehicles provides impetus for real-world evaluations using crash data. A logistic model was fitted to data from crashes that occurred on public roads constituting 3172 pedestrian injuries in New Zealand and four Australian States to estimate the odds of backover injury (compared to other sorts of pedestrian injury crashes) for the different technology combinations fitted as standard equipment (both reversing cameras and sensors; just reversing cameras; just sensors; neither cameras nor sensors) controlling for vehicle type, jurisdiction, speed limit area and year of manufacture restricted to the range 2007-2013. Compared to vehicles without any of these technologies, reduced odds of backover injury were estimated for all three of these technology configurations: 0.59 (95% CI 0.39-0.88) for reversing cameras by themselves; 0.70 (95% CI 0.49-1.01) for both reversing cameras and sensors; 0.69 (95% CI 0.47-1.03) for reverse parking sensors by themselves. These findings are important as they are the first to our knowledge to present an assessment of real-world safety effectiveness of these technologies. Copyright © 2016 Elsevier Ltd. All rights reserved.

Experiments of reconstructing discrete atmospheric dynamic models from data (I)

NASA Astrophysics Data System (ADS)

Lin, Zhenshan; Zhu, Yanyu; Deng, Ziwang

1995-03-01

In this paper, we give some experimental results of our study in reconstructing discrete atmospheric dynamic models from data. After a great deal of numerical experiments, we found that the logistic map, x n + 1 = 1- μx {2/n}, could be used in monthly mean temperature prediction when it was approaching the chaotic region, and its predictive results were in reverse states to the practical data. This means that the nonlinear developing behavior of the monthly mean temperature system is bifurcating back into the critical chaotic states from the chaotic ones.

Second-hand market as an alternative in reverse logistics

NASA Astrophysics Data System (ADS)

Pochampally, Kishore K.; Gupta, Surendra M.

2004-02-01

Collectors of discarded products seldom know when those products were bought and why they are discarded. Also, the products do not indicate their remaining life periods. So, it is difficult to decide if it is "sensible" to repair (if necessary) a particular product for subsequent sale on the second-hand market or to disassemble it partially or completely for subsequent remanufacture and/or recycle. To this end, we build an expert system using Bayesian updating process and fuzzy set theory, to aid such decision-making. A numerical example demonstrates the building approach.

The optimal manufacturing batch size with rework under time-varying demand process for a finite time horizon

NASA Astrophysics Data System (ADS)

Musa, Sarah; Supadi, Siti Suzlin; Omar, Mohd

2014-07-01

Rework is one of the solutions to some of the main issues in reverse logistic and green supply chain as it reduces production cost and environmental problem. Many researchers focus on developing rework model, but to the knowledge of the author, none of them has developed a model for time-varying demand rate. In this paper, we extend previous works and develop multiple batch production system for time-varying demand rate with rework. In this model, the rework is done within the same production cycle.

The use of reverse logistics for waste management in a Brazilian grocery retailer.

PubMed

Dias, Karina T S; Braga Junior, Sergio S

2016-01-01

Retail growth is a result of the diversification of departments with the intention to look to consumer's needs and level of demand. Pressed by consumers and by the law, the adoption of environmental preservation practices is becoming stronger among grocery retailers. The objective of this research was to analyse the practices of reverse logistics performed by a retailer and measure the amount of waste generated by each department. To reach the proposed goal, a field research study was conducted to directly observe a grocery retailer in the state of Sao Paulo, Brazil, for a period of 6 months and monitor the amounts of cardboard and plastic discarded by each department. Using the Wuppertal method, the first result observed was that the retailer stopped its monthly production of approximately 20 tonne of biotic and abiotic material, which influence global warming and degradation of the ozone layer. Another result observed with the implementation of reverse logistics, was that the general grocery department mostly used cardboard and plastic. This sector includes products such as food cupboard, drinks, household, health and beauty, and pet articles. The fresh fruit and vegetable department and the meat, chicken and frozen department were increasingly using less plastic and cardboard packaging, increasing the use of returnable and durable packaging and thus promoting sustainability. © The Author(s) 2015.

Reverse preferential spread in complex networks

NASA Astrophysics Data System (ADS)

Toyoizumi, Hiroshi; Tani, Seiichi; Miyoshi, Naoto; Okamoto, Yoshio

2012-08-01

Large-degree nodes may have a larger influence on the network, but they can be bottlenecks for spreading information since spreading attempts tend to concentrate on these nodes and become redundant. We discuss that the reverse preferential spread (distributing information inversely proportional to the degree of the receiving node) has an advantage over other spread mechanisms. In large uncorrelated networks, we show that the mean number of nodes that receive information under the reverse preferential spread is an upper bound among any other weight-based spread mechanisms, and this upper bound is indeed a logistic growth independent of the degree distribution.

Cost-benefit study of consumer product take-back programs using IBM's WIT reverse logistics optimization tool

NASA Astrophysics Data System (ADS)

Veerakamolmal, Pitipong; Lee, Yung-Joon; Fasano, J. P.; Hale, Rhea; Jacques, Mary

2002-02-01

In recent years, there has been increased focus by regulators, manufacturers, and consumers on the issue of product end of life management for electronics. This paper presents an overview of a conceptual study designed to examine the costs and benefits of several different Product Take Back (PTB) scenarios for used electronics equipment. The study utilized a reverse logistics supply chain model to examine the effects of several different factors in PTB programs. The model was done using the IBM supply chain optimization tool known as WIT (Watson Implosion Technology). Using the WIT tool, we were able to determine a theoretical optimal cost scenario for PTB programs. The study was designed to assist IBM internally in determining theoretical optimal Product Take Back program models and determining potential incentives for increasing participation rates.

Unified heuristics to solve routing problem of reverse logistics in sustainable supply chain

NASA Astrophysics Data System (ADS)

Anbuudayasankar, S. P.; Ganesh, K.; Lenny Koh, S. C.; Mohandas, K.

2010-03-01

A reverse logistics problem, motivated by many real-life applications, is examined where bottles/cans in which products are delivered from a processing depot to customers in one period are available for return to the depot in the following period. The picked-up bottles/cans need to be adjusted in the place of delivery load. This problem is termed as simultaneous delivery and pick-up problem with constrained capacity (SDPC). We develop three unified heuristics based on extended branch and bound heuristic, genetic algorithm and simulated annealing to solve SDPC. These heuristics are also designed to solve standard travelling salesman problem (TSP) and TSP with simultaneous delivery and pick-up (TSDP). We tested the heuristics on standard, derived and randomly generated datasets of TSP, TSDP and SDPC and obtained satisfying results with high convergence in reasonable time.

The Life Cycle Evaluation Model of External Diseconomy of Open-loop Supply Chain

NASA Astrophysics Data System (ADS)

Liu, Qian; Hu, Tianjun

2017-08-01

In recent years, with the continuous deterioration of pollution, resource space is gradually narrowed, the number of waste items increased, people began to use the method of recycling on waste products to ease the pressure on the environment. This paper adopted the external diseconomy of open-loop supply chain as the research object and constructed the model by the life cycle evaluation method, comparative analysis through the case. This paper also concludes that the key to solving the problem is to realize the closed-loop supply chain and building reverse logistics system is of great significance.

Global reverse supply chain design for solid waste recycling under uncertainties and carbon emission constraint.

PubMed

Xu, Zhitao; Elomri, Adel; Pokharel, Shaligram; Zhang, Qin; Ming, X G; Liu, Wenjie

2017-06-01

The emergence of concerns over environmental protection, resource conservation as well as the development of logistics operations and manufacturing technology has led several countries to implement formal collection and recycling systems of solid waste. Such recycling system has the benefits of reducing environmental pollution, boosting the economy by creating new jobs, and generating income from trading the recyclable materials. This leads to the formation of a global reverse supply chain (GRSC) of solid waste. In this paper, we investigate the design of such a GRSC with a special emphasis on three aspects; (1) uncertainty of waste collection levels, (2) associated carbon emissions, and (3) challenges posed by the supply chain's global aspect, particularly the maritime transportation costs and currency exchange rates. To the best of our knowledge, this paper is the first attempt to integrate the three above-mentioned important aspects in the design of a GRSC. We have used mixed integer-linear programming method along with robust optimization to develop the model which is validated using a sample case study of e-waste management. Our results show that using a robust model by taking the complex interactions characterizing global reverse supply chain networks into account, we can create a better GRSC. The effect of uncertainties and carbon constraints on decisions to reduce costs and emissions are also shown. Copyright © 2017 Elsevier Ltd. All rights reserved.

Optimising reverse logistics network to support policy-making in the case of Electrical and Electronic Equipment.

PubMed

Achillas, Ch; Vlachokostas, Ch; Aidonis, D; Moussiopoulos, N; Iakovou, E; Banias, G

2010-12-01

Due to the rapid growth of Waste Electrical and Electronic Equipment (WEEE) volumes, as well as the hazardousness of obsolete electr(on)ic goods, this type of waste is now recognised as a priority stream in the developed countries. Policy-making related to the development of the necessary infrastructure and the coordination of all relevant stakeholders is crucial for the efficient management and viability of individually collected waste. This paper presents a decision support tool for policy-makers and regulators to optimise electr(on)ic products' reverse logistics network. To that effect, a Mixed Integer Linear Programming mathematical model is formulated taking into account existing infrastructure of collection points and recycling facilities. The applicability of the developed model is demonstrated employing a real-world case study for the Region of Central Macedonia, Greece. The paper concludes with presenting relevant obtained managerial insights. Copyright © 2010 Elsevier Ltd. All rights reserved.

Epidemic models for phase transitions: application to a physical gel

NASA Astrophysics Data System (ADS)

Bilge, A. H.; Pekcan, O.; Kara, S.; Ogrenci, A. S.

2017-09-01

Carrageenan gels are characterized by reversible sol-gel and gel-sol transitions under cooling and heating processes and these transitions are approximated by generalized logistic growth curves. We express the transitions of carrageenan-water system, as a representative of reversible physical gels, in terms of a modified Susceptible-Infected-Susceptible epidemic model, as opposed to the Susceptible-Infected-Removed model used to represent the (irreversible) chemical gel formation in the previous work. We locate the gel point Tc of sol-gel and gel-sol transitions and we find that, for the sol-gel transition (cooling), Tc > Tsg (transition temperature), i.e. Tc is earlier in time for all carrageenan contents and moves forward in time and gets closer to Tsg as the carrageenan content increases. For the gel-sol transition (heating), Tc is relatively closer to Tgs; it is greater than Tgs, i.e. later in time for low carrageenan contents and moves backward as carrageenan content increases.

77 FR 40026 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-06

... and contractor logistics, Quality Assurance Team support services, engineering and technical support..., engineering and technical support, and other related elements of program support. The estimated cost is $49..., maintenance, or training is Confidential. Reverse engineering could reveal Confidential information...

Analysis on the cost structure of product recall for reverse supply chain

NASA Astrophysics Data System (ADS)

Yanhua, Feng; Xuhui, Xia; Zheng, Yang

2017-12-01

The research on the reverse supply chain of product recall mainly focused on the recall network structure, logistics mode and so on. In this paper, when product recall and supply channel are fixed, the specific structure and function expression of cost are analyzed according to the peak season and off-season of recall activities, and whether the assembly manufacturer, supplier and recyclers are cooperated situation, respectively, to build the total cost structure of the function model. Finally, the model is validated correctly through the automotive industry and the electromechanical industry.

Chaotic Behaviour of a Driven P-N Junction

NASA Astrophysics Data System (ADS)

Perez, Jose Maria

The chaotic behavior of a driven p-n junction is experimentally examined. Bifurcation diagrams for the system are measured, showing period doubling bifurcations up to f/32, onset of chaos, reverse bifurcations of chaotic bands, and periodic windows. Some of the measured bifurcation diagrams are similar to the bifurcation diagram of the logistic map x(,n+1) = (lamda)x(,n)(1 - x(,n)). A return map is also measured showing approximately a one-dimensional map with a single extremum at low driving voltages. The intermittency route to chaos is experimentally observed to occur near a tangent bifurcation as the system approaches a period 5 window at (lamda) = (lamda)(,5). Data are presented for the dependence of the average laminar length on (epsilon) = (lamda)(,5) - (lamda), and for the probability distribution P(l) vs. l. The effects of additive stochastic noise on period doubling, chaos, windows, and intermittency are examined and are found to agree with the logistic model and universal predictions. Three examples of crisis of the attractor are observed. The crises occur when an unstable orbit intersects the chaotic attractor. A period adding sequence is reported in which wide periodic windows of period 2, 3, 4, ... are observed for increasing driving voltage. The initial period doubling cascade and the period adding sequence are compared to two theoretical models, with reasonable success.

[Research of regional medical consumables reagent logistics system in the modern hospital].

PubMed

Wu, Jingjiong; Zhang, Yanwen; Luo, Xiaochen; Zhang, Qing; Zhu, Jianxin

2013-09-01

To explore the modern hospital and regional medical consumable reagents logistics system management. The characteristics of regional logistics, through cooperation between medical institutions within the region, and organize a wide range of special logistics activities, to make reasonable of the regional medical consumable reagents logistics. To set the regional management system, dynamic management systems, supply chain information management system, after-sales service system and assessment system. By the research of existing medical market and medical resources, to establish the regional medical supplies reagents directory and the initial data. The emphasis is centralized dispatch of medical supplies reagents, to introduce qualified logistics company for dispatching, to improve the modern hospital management efficiency, to costs down. Regional medical center and regional community health service centers constitute a regional logistics network, the introduction of medical consumable reagents logistics services, fully embodies integrity level, relevance, purpose, environmental adaptability of characteristics by the medical consumable reagents regional logistics distribution. Modern logistics distribution systems can increase the area of medical consumables reagent management efficiency and reduce costs.

Strategies on the Implementation of China's Logistics Information Network

NASA Astrophysics Data System (ADS)

Dong, Yahui; Li, Wei; Guo, Xuwen

The economic globalization and trend of e-commerce network have determined that the logistics industry will be rapidly developed in the 21st century. In order to achieve the optimal allocation of resources, a worldwide rapid and sound customer service system should be established. The establishment of a corresponding modern logistics system is the inevitable choice of this requirement. It is also the inevitable choice for the development of modern logistics industry in China. The perfect combination of modern logistics and information network can better promote the development of the logistics industry. Through the analysis of Status of Logistics Industry in China, this paper summed up the domestic logistics enterprise logistics information system in the building of some common problems. According to logistics information systems planning methods and principles set out logistics information system to optimize the management model.

Laser SRS tracker for reverse prototyping tasks

NASA Astrophysics Data System (ADS)

Kolmakov, Egor; Redka, Dmitriy; Grishkanich, Aleksandr; Tsvetkov, Konstantin

2017-10-01

According to the current great interest concerning Large-Scale Metrology applications in many different fields of manufacturing industry, technologies and techniques for dimensional measurement have recently shown a substantial improvement. Ease-of-use, logistic and economic issues, as well as metrological performance, are assuming a more and more important role among system requirements. The project is planned to conduct experimental studies aimed at identifying the impact of the application of the basic laws of chip and microlasers as radiators on the linear-angular characteristics of existing measurement systems. The project is planned to conduct experimental studies aimed at identifying the impact of the application of the basic laws of microlasers as radiators on the linear-angular characteristics of existing measurement systems. The system consists of a distributed network-based layout, whose modularity allows to fit differently sized and shaped working volumes by adequately increasing the number of sensing units. Differently from existing spatially distributed metrological instruments, the remote sensor devices are intended to provide embedded data elaboration capabilities, in order to share the overall computational load.

Sustainability assessment and prioritisation of e-waste management options in Brazil.

PubMed

de Souza, Ricardo Gabbay; Clímaco, João C Namorado; Sant'Anna, Annibal Parracho; Rocha, Tiago Barreto; do Valle, Rogério de Aragão Bastos; Quelhas, Osvaldo Luiz Gonçalves

2016-11-01

Brazil has an increasing rate of e-waste generation, but there are currently few adequate management systems in operation, with the largest share of Waste Electrical and Electronic Equipment (WEEE) going to landfill sites or entering informal chains. The National Solid Waste Policy (2010) enforces the implementation of reverse logistics systems under the shared responsibility of consumers, companies and governments. The objective of this paper is to assess sustainability and prioritise system alternatives for potential implementation in the metropolitan region of Rio de Janeiro. Sustainability criteria and decision alternatives were defined by elicitation of stakeholders. The adopted multicriteria approach combines Life Cycle Assessment with qualitative evaluations by a small sample of regional experts with knowledge of the problem. The recommended system consists of a hybrid WEEE collection scheme with delivery points at shops, metro stations and neighbourhood centres; a pre-treatment phase with the involvement of private companies, cooperatives and social enterprises; and full recycling of all components in the country. Copyright © 2016 Elsevier Ltd. All rights reserved.

Investigation of possibility of surface rupture derived from PFDHA and calculation of surface displacement based on dislocation

NASA Astrophysics Data System (ADS)

Inoue, N.; Kitada, N.; Irikura, K.

2013-12-01

A probability of surface rupture is important to configure the seismic source, such as area sources or fault models, for a seismic hazard evaluation. In Japan, Takemura (1998) estimated the probability based on the historical earthquake data. Kagawa et al. (2004) evaluated the probability based on a numerical simulation of surface displacements. The estimated probability indicates a sigmoid curve and increases between Mj (the local magnitude defined and calculated by Japan Meteorological Agency) =6.5 and Mj=7.0. The probability of surface rupture is also used in a probabilistic fault displacement analysis (PFDHA). The probability is determined from the collected earthquake catalog, which were classified into two categories: with surface rupture or without surface rupture. The logistic regression is performed for the classified earthquake data. Youngs et al. (2003), Ross and Moss (2011) and Petersen et al. (2011) indicate the logistic curves of the probability of surface rupture by normal, reverse and strike-slip faults, respectively. Takao et al. (2013) shows the logistic curve derived from only Japanese earthquake data. The Japanese probability curve shows the sharply increasing in narrow magnitude range by comparison with other curves. In this study, we estimated the probability of surface rupture applying the logistic analysis to the surface displacement derived from a surface displacement calculation. A source fault was defined in according to the procedure of Kagawa et al. (2004), which determined a seismic moment from a magnitude and estimated the area size of the asperity and the amount of slip. Strike slip and reverse faults were considered as source faults. We applied Wang et al. (2003) for calculations. The surface displacements with defined source faults were calculated by varying the depth of the fault. A threshold value as 5cm of surface displacement was used to evaluate whether a surface rupture reach or do not reach to the surface. We carried out the logistic regression analysis to the calculated displacements, which were classified by the above threshold. The estimated probability curve indicated the similar trend to the result of Takao et al. (2013). The probability of revere faults is larger than that of strike slip faults. On the other hand, PFDHA results show different trends. The probability of reverse faults at higher magnitude is lower than that of strike slip and normal faults. Ross and Moss (2011) suggested that the sediment and/or rock over the fault compress and not reach the displacement to the surface enough. The numerical theory applied in this study cannot deal with a complex initial situation such as topography.

The critical distance in laser-induced plasmas: an operative definition

NASA Astrophysics Data System (ADS)

Delle Side, D.; Giuffreda, E.; Nassisi, V.

2016-05-01

We propose a method to estimate a precise value for the critical distance Lcr after which three-body recombination stops to produce charge losses in an expanding laser-induced plasma. We show in particular that the total charge collected has a ``reversed sigmoid'' shape as a function of the target-to-detector distance. Fitting the total charge data with a logistic related function, we could consider as Lcr the intercept of the tangent to this curve in its inflection point. Furthermore, this value scales well with theoretical predictions. From the application point of view, this could be of great practical interest, since it provide a reliable way to precisely determine the geometry of the extraction system in Laser Ion Sources.

GIS-based spatial decision support system for grain logistics management

NASA Astrophysics Data System (ADS)

Zhen, Tong; Ge, Hongyi; Jiang, Yuying; Che, Yi

2010-07-01

Grain logistics is the important component of the social logistics, which can be attributed to frequent circulation and the great quantity. At present time, there is no modern grain logistics distribution management system, and the logistics cost is the high. Geographic Information Systems (GIS) have been widely used for spatial data manipulation and model operations and provide effective decision support through its spatial database management capabilities and cartographic visualization. In the present paper, a spatial decision support system (SDSS) is proposed to support policy makers and to reduce the cost of grain logistics. The system is composed of two major components: grain logistics goods tracking model and vehicle routing problem optimization model and also allows incorporation of data coming from external sources. The proposed system is an effective tool to manage grain logistics in order to increase the speed of grain logistics and reduce the grain circulation cost.

Higher outcomes of vasectomy reversal in men with the same female partner as before vasectomy.

PubMed

Ostrowski, Kevin A; Polackwich, A Scott; Kent, Joe; Conlin, Michael J; Hedges, Jason C; Fuchs, Eugene F

2015-01-01

We reviewed fertility outcomes of vasectomy reversal at a high surgical volume center in men with the same female partner as before vasectomy. We retrospectively studied a prospective database. All vasectomy reversals were performed by a single surgeon (EFF). Patients who underwent microsurgical vasectomy reversal and had the same female partner as before vasectomy were identified from 1978 to 2011. Pregnancy and live birth rates, procedure type (bilateral vasovasostomy, bilateral vasoepididymostomy, unilateral vasovasostomy or unilateral vasoepididymostomy), patency rate, time from reversal and spouse age were evaluated. We reviewed the records of 3,135 consecutive microsurgical vasectomy reversals. Of these patients 524 (17%) who underwent vasectomy reversal had the same female partner as before vasectomy. Complete information was available on 258 patients (49%), who had a 94% vas patency rate. The clinical pregnancy rate was 83% by natural means compared to 60% in our general vasectomy reversal population (p <0.0001). On logistic regression analysis controlling for female partner and patient ages, years from vasectomy and vasectomy reversal with the same female partner the OR was 2 (p <0.007). Average time from vasectomy was 5.7 years. Average patient and female partner age at reversal was 38.9 and 33.2 years, respectively. Outcomes of clinical pregnancy and live birth rates are higher in men who undergo microsurgical vasectomy reversal with the same female partner. These outcomes may be related to a shorter interval from vasectomy, previous fertility and couple motivation. Copyright © 2015 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Do `negative' temperatures exist?

NASA Astrophysics Data System (ADS)

Lavenda, B. H.

1999-06-01

A modification of the second law is required for a system with a bounded density of states and not the introduction of a `negative' temperature scale. The ascending and descending branches of the entropy versus energy curve describe particle and hole states, having thermal equations of state that are given by the Fermi and logistic distributions, respectively. Conservation of energy requires isentropic states to be isothermal. The effect of adiabatically reversing the field is entirely mechanical because the only difference between the two states is their energies. The laws of large and small numbers, leading to the normal and Poisson approximations, characterize statistically the states of infinite and zero temperatures, respectively. Since the heat capacity also vanishes in the state of maximum disorder, the third law can be generalized in systems with a bounded density of states: the entropy tends to a constant as the temperature tends to either zero or infinity.

Space Station fluid management logistics

NASA Technical Reports Server (NTRS)

Dominick, Sam M.

1990-01-01

Viewgraphs and discussion on space station fluid management logistics are presented. Topics covered include: fluid management logistics - issues for Space Station Freedom evolution; current fluid logistics approach; evolution of Space Station Freedom fluid resupply; launch vehicle evolution; ELV logistics system approach; logistics carrier configuration; expendable fluid/propellant carrier description; fluid carrier design concept; logistics carrier orbital operations; carrier operations at space station; summary/status of orbital fluid transfer techniques; Soviet progress tanker system; and Soviet propellant resupply system observations.

Reverse Inclusion: Providing Peer Social Interaction Opportunities to Students Placed in Self-Contained Special Education Classrooms

ERIC Educational Resources Information Center

Schoger, Kimberly D.

2006-01-01

The social and academic benefits of inclusion for students with disabilities have been well researched and well documented. Unfortunately, inclusion opportunities are limited by lack of qualified staff, logistics, scheduling and other difficulties encountered when attempting to meet students' unique needs in the general education setting. As a…

Multi scale habitat relationships of Martes americana in northern Idaho, U.S.A.

Treesearch

Tzeidle N. Wasserman; Samuel A. Cushman; David O. Wallin; Jim Hayden

2012-01-01

We used bivariate scaling and logistic regression to investigate multiple-scale habitat selection by American marten (Martes americana). Bivariate scaling reveals dramatic differences in the apparent nature and strength of relationships between marten occupancy and a number of habitat variables across a range of spatial scales. These differences include reversals in...

Coordinate measuring system based on microchip lasers for reverse prototyping

NASA Astrophysics Data System (ADS)

Iakovlev, Alexey; Grishkanich, Alexsandr S.; Redka, Dmitriy; Tsvetkov, Konstantin

2017-02-01

According to the current great interest concerning Large-Scale Metrology applications in many different fields of manufacturing industry, technologies and techniques for dimensional measurement have recently shown a substantial improvement. Ease-of-use, logistic and economic issues, as well as metrological performance, are assuming a more and more important role among system requirements. The project is planned to conduct experimental studies aimed at identifying the impact of the application of the basic laws of chip and microlasers as radiators on the linear-angular characteristics of existing measurement systems. The project is planned to conduct experimental studies aimed at identifying the impact of the application of the basic laws of microlasers as radiators on the linear-angular characteristics of existing measurement systems. The system consists of a distributed network-based layout, whose modularity allows to fit differently sized and shaped working volumes by adequately increasing the number of sensing units. Differently from existing spatially distributed metrological instruments, the remote sensor devices are intended to provide embedded data elaboration capabilities, in order to share the overall computational load.

Process of forming compounds using reverse micelle or reverse microemulsion systems

DOEpatents

Linehan, John C.; Fulton, John L.; Bean, Roger M.

1998-01-01

The present invention is directed to a process for producing a nanometer-sized metal compound. The process comprises forming a reverse micelle or reverse microemulsion system comprising a polar fluid in a non-polar or low-polarity fluid. A first reactant comprising a multi-component, water-soluble metal compound is introduced into the polar fluid in a non-polar or low-polarity fluid. This first reactant can be introduced into the reverse micelle or reverse microemulsion system during formation thereof or subsequent to the formation of the reverse micelle or microemulsion system. The water-soluble metal compound is then reacted in the reverse micelle or reverse microemulsion system to form the nanometer-sized metal compound. The nanometer-sized metal compound is then precipitated from the reverse micelle or reverse microemulsion system.

Does a History of Unintended Pregnancy Lessen the Likelihood of Desire for Sterilization Reversal?

PubMed Central

Grady, Cynthia D.; Schwarz, Eleanor Bimla; Emeremni, Chetachi A.; Yabes, Jonathan; Akers, Aletha; Zite, Nikki

2013-01-01

Abstract Background Unintended pregnancy has been significantly associated with subsequent female sterilization. Whether women who are sterilized after experiencing an unintended pregnancy are less likely to express desire for sterilization reversal is unknown. Methods This study used national, cross-sectional data collected by the 2006–2010 National Survey of Family Growth. The study sample included women ages 15–44 who were surgically sterile from a tubal sterilization at the time of interview. Multivariable logistic regression was used to examine the relationship between a history of unintended pregnancy and desire for sterilization reversal while controlling for potential confounders. Results In this nationally representative sample of 1,418 women who were sterile from a tubal sterilization, 78% had a history of at least one unintended pregnancy and 28% expressed a desire to have their sterilization reversed. In unadjusted analysis, having a prior unintended pregnancy was associated with higher odds of expressing desire for sterilization reversal (odds ratio [OR]: 1.80; 95% confidence interval [CI]: 1.15–2.79). In adjusted analysis controlling for sociodemographic factors, unintended pregnancy was no longer significantly associated with desire for reversal (OR: 1.46; 95% CI: 0.91–2.34). Conclusion Among women who had undergone tubal sterilization, a prior history of unintended pregnancy did not decrease desire for sterilization reversal. PMID:23621776

A hybrid solution approach for a multi-objective closed-loop logistics network under uncertainty

NASA Astrophysics Data System (ADS)

Mehrbod, Mehrdad; Tu, Nan; Miao, Lixin

2015-06-01

The design of closed-loop logistics (forward and reverse logistics) has attracted growing attention with the stringent pressures of customer expectations, environmental concerns and economic factors. This paper considers a multi-product, multi-period and multi-objective closed-loop logistics network model with regard to facility expansion as a facility location-allocation problem, which more closely approximates real-world conditions. A multi-objective mixed integer nonlinear programming formulation is linearized by defining new variables and adding new constraints to the model. By considering the aforementioned model under uncertainty, this paper develops a hybrid solution approach by combining an interactive fuzzy goal programming approach and robust counterpart optimization based on three well-known robust counterpart optimization formulations. Finally, this paper compares the results of the three formulations using different test scenarios and parameter-sensitive analysis in terms of the quality of the final solution, CPU time, the level of conservatism, the degree of closeness to the ideal solution, the degree of balance involved in developing a compromise solution, and satisfaction degree.

The Logistics Equipment Carbon Emission Monitoring System for a Green Logistics

NASA Astrophysics Data System (ADS)

Choi, Hyungrim; Park, Byoungkwon; Lee, Byungha; Park, Yongsung; Lee, Changsup; Ha, Jeongsoo

Recently, due to the global enforcement of obligations to reduce green house gases and various environmental regulations, low carbon green growth strategies are required. Currently, in our country, environment friendly logistics activities are staying in the early stage compared to advanced countries because of our country's large energy consumption type industrial structures. As a measure to respond to the trend of the reinforcement of international environmental regulations in the sector of logistics, active green logistics systems should be established and to solve this problem, this study is intended to develop a monitoring system that can manage the carbon emission of logistics equipment(container truck, discharging equipment etc) in real time using a new technology named IP-RFID. The monitoring system developed in this study can actively manage the carbon emission of individual logistics equipment by attaching IP-Tags that can measure the carbon emission of individual logistics equipment in real time and transmit the information obtained from the measurement directly to users through IP communication. Since carbon emission can be managed by logistics equipment and drivers can check the carbon emission of equipment through this system, the carbon emission generated in the logistics sector may be reduced by using this system.

Application of wireless sensor network technology in logistics information system

NASA Astrophysics Data System (ADS)

Xu, Tao; Gong, Lina; Zhang, Wei; Li, Xuhong; Wang, Xia; Pan, Wenwen

2017-04-01

This paper introduces the basic concepts of active RFID (WSN-ARFID) based on wireless sensor networks and analyzes the shortcomings of the existing RFID-based logistics monitoring system. Integrated wireless sensor network technology and the scrambling point of RFID technology. A new real-time logistics detection system based on WSN and RFID, a model of logistics system based on WSN-ARFID is proposed, and the feasibility of this technology applied to logistics field is analyzed.

Logistics system as an effort of integration in the Mandalika Special Economic Zone and its surroundings

NASA Astrophysics Data System (ADS)

Suheri, T.; Melinda, W. G.

2018-05-01

Indonesia as one of the maritime countries with its territory in the form of an archipelago. A SEZ with an integrated logistics system is very influential on the value of tourism, especially marine tourism. The creation of logistics activities in the Mandalika SEZ as a tourism area formed from the export and import of products as a form of tourism promotion will attract many domestic and foreign tourists. The importance of a logistics system for both people and goods can support the investment system in the area of Mandalika SEZ. The logistics system can provide agglomeration of facilities and infrastructure to support tourist activities in terms of cargo distribution both locally and globally. Mandalika SEZ requires an integrated logistics system to improve national competitiveness in the form of physical system support such as commodity availability and city/regional infrastructure as well as non-physical infrastructure such as service providers and regulation in order to be sustainable. The logistics system also plays a strategic role in synchronizing and harmonizing progress between economies and between regions in order to avoid an imbalance with the surrounding area. This study aims to find out the performance of the existing logistics systems in the Mandalika area and its surrounding areas in order to formulate policies to integrate the logistics systems within and outside the region. This research used content analysis methodology.

Space Station - An integrated approach to operational logistics support

NASA Technical Reports Server (NTRS)

Hosmer, G. J.

1986-01-01

Development of an efficient and cost effective operational logistics system for the Space Station will require logistics planning early in the program's design and development phase. This paper will focus on Integrated Logistics Support (ILS) Program techniques and their application to the Space Station program design, production and deployment phases to assure the development of an effective and cost efficient operational logistics system. The paper will provide the methodology and time-phased programmatic steps required to establish a Space Station ILS Program that will provide an operational logistics system based on planned Space Station program logistics support.

What is the Right RFID for Your Process?

DTIC Science & Technology

2006-04-30

chain efficiency at the US Department of Defense (DoD) and at major retailers such as Wal-Mart, Tesco and others has prompted these organizations...areas of expertise include global operations, supply- chain management, sustainable technologies, product stewardship, reverse logistics and...time MBA programs. Areas of Apte’s research interests include managing service operations, supply- chain management, technology management, and

Logistics hardware and services control system

NASA Technical Reports Server (NTRS)

Koromilas, A.; Miller, K.; Lamb, T.

1973-01-01

Software system permits onsite direct control of logistics operations, which include spare parts, initial installation, tool control, and repairable parts status and control, through all facets of operations. System integrates logistics actions and controls receipts, issues, loans, repairs, fabrications, and modifications and assets in predicting and allocating logistics parts and services effectively.

USAREUR LOGISTIC MANAGEMENT INFORMATION SYSTEM - 360 DAY BRIEFING.

DTIC Science & Technology

Information System . This report is the 360 Day Briefing presented to the DCSLOG and his Logistic Management Information System Committee at the conclusion of the study. (Author)...objective of the study was to provide for the Deputy Chief of Staff for Logistics, Headquarters USAREUR and Seventh Army, a Logistic Management

Fleet logistics system : data administration plans and procedures manual

DOT National Transportation Integrated Search

1996-01-23

This manual provides data administration (DA) procedures for developers and maintainers of Coast Guard fleet logistics information systems. Fleet logistics includes a community of supply, logistics, maintenance, and shipboard functions. The informati...

DISPLA: decision information system for procurement and logistics analysis

NASA Astrophysics Data System (ADS)

Calvo, Alberto B.; Danish, Alexander J.; Lamonakis, Gregory G.

2002-08-01

This paper describes an information-exchange system for Display systems acquisition and logistics support. DISPLA (Decision Information System for Procurement and Logistics Analysis) is an Internet-based system concept for bringing sellers (display system and component suppliers) and buyers (Government Program Offices and System Integrators) together in an electronic exchange to improve the acquisition and logistics analysis support of Flat Panel Displays for the military. A proof-of-concept demonstration is presented in this paper using sample data from vendor Web sites and Government data sources.

Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 7: PEP logistics and training plan requirements

NASA Technical Reports Server (NTRS)

1979-01-01

Recommendations for logistics activities and logistics planning are presented based on the assumption that a system prime contractor will perform logistics functions to support all program hardware and will implement a logistics system to include the planning and provision of products and services to assure cost effective coverage of the following: maintainability; maintenance; spares and supply support; fuels; pressurants and fluids; operations and maintenance documentation training; preservation, packaging and packing; transportation and handling; storage; and logistics management information reporting. The training courses, manpower, materials, and training aids required will be identified and implemented in a training program.

Use of Ubiquitous Technologies in Military Logistic System in Iran

NASA Astrophysics Data System (ADS)

Jafari, P.; Sadeghi-Niaraki, A.

2013-09-01

This study is about integration and evaluation of RFID and ubiquitous technologies in military logistic system management. Firstly, supply chain management and the necessity of a revolution in logistic systems especially in military area, are explained. Secondly RFID and ubiquitous technologies and the advantages of their use in supply chain management are introduced. Lastly a system based on these technologies for controlling and increasing the speed and accuracy in military logistic system in Iran with its unique properties, is presented. The system is based on full control of military logistics (supplies) from the time of deployment to replenishment using sensor network, ubiquitous and RFID technologies.

The relationship between red blood cell distribution width and blood pressure abnormal dipping in patients with essential hypertension: a cross-sectional study.

PubMed

Su, Dan; Guo, Qi; Gao, Ya; Han, Jin; Yan, Bin; Peng, Liyuan; Song, Anqi; Zhou, Fuling; Wang, Gang

2016-02-23

To investigate whether red blood cell distribution width (RDW) is associated with the blood pressure (BP) reverse-dipper pattern in patients with hypertension. Cross-sectional study. Single centre. Patients with essential hypertension were included in our study (n=708). The exclusion criteria included age <18 or >90 years, incomplete clinical data, night workers, diagnosis of secondary hypertension, under antihypertensive treatment, intolerance for the 24 h ambulatory BP monitoring (ABPM) and BP reading success rate <70%. Physical examination and ABPM were performed for all patients in our study. The value of RDW was measured using an automated haematology analyser. The distribution of RDW in patients with hypertension among different circadian BP pattern groups was analyzed using analysis of variance (ANOVA). Multinomial logistic regression was applied to explore the associations of RDW and other relevant variables with ABPM results. There was significantly increased RDW in reverse dippers (13.52 ± 1.05) than dippers (13.25 ± 0.85) of hypertension (p=0.012). Moreover, multinomial logistic regression analysis showed that RDW (OR 1.325, 95% CI 1.037 to 1.692, p=0.024) and diabetes mellitus (OR 2.286, 95% CI 1.380 to 3.788, p=0.001) were significantly different when comparing the reverse-dipper BP pattern with the dipper pattern. However, there was no difference of RDW between the non-dipper pattern and the reverse-dipper pattern (OR 1.036, 95% CI 0.867 to 1.238, p=0.693). In addition to this, RDW was negatively correlated with the decline rate of nocturnal systolic BP (r=-0.113; p=0.003) and diastolic BP (r=-0.101; p=0.007). Our results suggested that RDW might associate with the abnormal dipper BP patterns of either reverse dipping or non-dipping homogeneously examined with 24 h ABPM. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Comprehension of texts by deaf elementary school students: The role of grammatical understanding.

PubMed

Barajas, Carmen; González-Cuenca, Antonia M; Carrero, Francisco

2016-12-01

The aim of this study was to analyze how the reading process of deaf Spanish elementary school students is affected both by those components that explain reading comprehension according to the Simple View of Reading model: decoding and linguistic comprehension (both lexical and grammatical) and by other variables that are external to the reading process: the type of assistive technology used, the age at which it is implanted or fitted, the participant's socioeconomic status and school stage. Forty-seven students aged between 6 and 13 years participated in the study; all presented with profound or severe prelingual bilateral deafness, and all used digital hearing aids or cochlear implants. Students' text comprehension skills, decoding skills and oral comprehension skills (both lexical and grammatical) were evaluated. Logistic regression analysis indicated that neither the type of assistive technology, age at time of fitting or activation, socioeconomic status, nor school stage could predict the presence or absence of difficulties in text comprehension. Furthermore, logistic regression analysis indicated that neither decoding skills, nor lexical age could predict competency in text comprehension; however, grammatical age could explain 41% of the variance. Probing deeper into the effect of grammatical understanding, logistic regression analysis indicated that a participant's understanding of reversible passive object-verb-subject sentences and reversible predicative subject-verb-object sentences accounted for 38% of the variance in text comprehension. Based on these results, we suggest that it might be beneficial to devise and evaluate interventions that focus specifically on grammatical comprehension. Copyright © 2016 Elsevier Ltd. All rights reserved.

Exploring the Lived Experiences of Program Managers Regarding an Automated Logistics Environment

ERIC Educational Resources Information Center

Allen, Ronald Timothy

2014-01-01

Automated Logistics Environment (ALE) is a new term used by Navy and aerospace industry executives to describe the aggregate of logistics-related information systems that support modern aircraft weapon systems. The development of logistics information systems is not always well coordinated among programs, often resulting in solutions that cannot…

Research and design of logistical information system based on SOA

NASA Astrophysics Data System (ADS)

Zhang, Bo

2013-03-01

Through the study on the existing logistics information systems and SOA technology, based on the current situation of enterprise logistics management and business features, this paper puts forward a SOA-based logistics system design program. This program is made in the WCF framework, with the combination of SOA and the actual characteristics of logistics enterprises, is simple to realize, easy to operate, and has strong expansion characteristic, therefore has high practical value.

Analysis of Logistics in Support of a Human Lunar Outpost

NASA Technical Reports Server (NTRS)

Cirillo, William; Earle, Kevin; Goodliff, Kandyce; Reeves, j. D.; Andrashko, Mark; Merrill, R. Gabe; Stromgren, Chel

2008-01-01

Strategic level analysis of the integrated behavior of lunar transportation system and lunar surface system architecture options is performed to inform NASA Constellation Program senior management on the benefit, viability, affordability, and robustness of system design choices. This paper presents an overview of the approach used to perform the campaign (strategic) analysis, with an emphasis on the logistics modeling and the impacts of logistics resupply on campaign behavior. An overview of deterministic and probabilistic analysis approaches is provided, with a discussion of the importance of each approach to understanding the integrated system behavior. The logistics required to support lunar surface habitation are analyzed from both 'macro-logistics' and 'micro-logistics' perspectives, where macro-logistics focuses on the delivery of goods to a destination and micro-logistics focuses on local handling of re-supply goods at a destination. An example campaign is provided to tie the theories of campaign analysis to results generation capabilities.

A development of logistics management models for the Space Transportation System

NASA Technical Reports Server (NTRS)

Carrillo, M. J.; Jacobsen, S. E.; Abell, J. B.; Lippiatt, T. F.

1983-01-01

A new analytic queueing approach was described which relates stockage levels, repair level decisions, and the project network schedule of prelaunch operations directly to the probability distribution of the space transportation system launch delay. Finite source population and limited repair capability were additional factors included in this logistics management model developed specifically for STS maintenance requirements. Data presently available to support logistics decisions were based on a comparability study of heavy aircraft components. A two-phase program is recommended by which NASA would implement an integrated data collection system, assemble logistics data from previous STS flights, revise extant logistics planning and resource requirement parameters using Bayes-Lin techniques, and adjust for uncertainty surrounding logistics systems performance parameters. The implementation of these recommendations can be expected to deliver more cost-effective logistics support.

Integrated Computer System of Management in Logistics

NASA Astrophysics Data System (ADS)

Chwesiuk, Krzysztof

2011-06-01

This paper aims at presenting a concept of an integrated computer system of management in logistics, particularly in supply and distribution chains. Consequently, the paper includes the basic idea of the concept of computer-based management in logistics and components of the system, such as CAM and CIM systems in production processes, and management systems for storage, materials flow, and for managing transport, forwarding and logistics companies. The platform which integrates computer-aided management systems is that of electronic data interchange.

Problem parental care and teenage deliberate self-harm in young community adults.

PubMed

Bifulco, Antonia; Schimmenti, Adriano; Moran, Patricia; Jacobs, Catherine; Bunn, Amanda; Rusu, Adina Carmen

2014-01-01

Deliberate self-harm (DSH) in young people is a clinical and social problem related to early maltreatment but with little specificity in type of care or abuse determined. A community sample of 160 high-risk young people (aged 16-30) were the offspring of mothers' previously interviewed as vulnerable to major depression. The youth were interviewed to determine DSH (both suicidal and nonsuicidal), childhood maltreatment (using the Childhood Experience of Care and Abuse interview) and major depression (using SCID for DSMIV) before age 17. Around one fifth reported DSH; equal proportions were suicidal and nonsuicidal with a fourth of these with both. DSH was highly related to family context (single mother upbringing and family discord) and poor parental care (including antipathy, neglect, inadequate supervision, and role reversal). Highest odds ratios were for role reversal (OR = 17) and neglect (OR = 11). DSH was unrelated to any type of abuse. Logistic regression showed that role reversal, inadequate supervision, and teenage depression all modeled DSH. There was some specificity, with single mother upbringing, role reversal, and inadequate supervision predicting nonsuicidal DSH, and neglect and role reversal alone predicting suicidal DSH. Role reversal remained a key predictor for both types of DSH when controls were applied. Poor childhood care, which has implications for problematic emotion regulation and empoverished social development, needs to be understood to improve interventions and treatment for DSH in young people.

75 FR 17910 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-08

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete a system of records. SUMMARY: The Defense Logistics Agency proposes to delete a system of records notice in its existing...-5045. SUPPLEMENTARY INFORMATION: The Defense Logistics Agency systems of records notices subject to the...

75 FR 15694 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete a system of records. SUMMARY: The Defense Logistics Agency proposes to delete a system of records notice in its existing...-5045. SUPPLEMENTARY INFORMATION: The Defense Logistics Agency systems of records notices subject to the...

75 FR 52515 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to alter a system of records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records notice in its existing.... Jody Sinkler at (703) 767-5045. SUPPLEMENTARY INFORMATION: The Defense Logistics Agency systems of...

75 FR 19377 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-14

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to alter a system of records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records notice in its existing...-5045. SUPPLEMENTARY INFORMATION: The Defense Logistics Agency systems of records notices subject to the...

75 FR 20580 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-20

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency proposes to amend a system of records notice in its existing.... SUPPLEMENTARY INFORMATION: The Defense Logistics Agency systems of records notices subject to the Privacy Act of...

75 FR 10473 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-08

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency proposes to amend a system of records notice in its existing...-5045. SUPPLEMENTARY INFORMATION: The Defense Logistics Agency systems of records notices subject to the...

Chaotic and stable perturbed maps: 2-cycles and spatial models

NASA Astrophysics Data System (ADS)

Braverman, E.; Haroutunian, J.

2010-06-01

As the growth rate parameter increases in the Ricker, logistic and some other maps, the models exhibit an irreversible period doubling route to chaos. If a constant positive perturbation is introduced, then the Ricker model (but not the classical logistic map) experiences period doubling reversals; the break of chaos finally gives birth to a stable two-cycle. We outline the maps which demonstrate a similar behavior and also study relevant discrete spatial models where the value in each cell at the next step is defined only by the values at the cell and its nearest neighbors. The stable 2-cycle in a scalar map does not necessarily imply 2-cyclic-type behavior in each cell for the spatial generalization of the map.

Research on simulation based material delivery system for an automobile company with multi logistics center

NASA Astrophysics Data System (ADS)

Luo, D.; Guan, Z.; Wang, C.; Yue, L.; Peng, L.

2017-06-01

Distribution of different parts to the assembly lines is significant for companies to improve production. Current research investigates the problem of distribution method optimization of a logistics system in a third party logistic company that provide professional services to an automobile manufacturing case company in China. Current research investigates the logistics leveling the material distribution and unloading platform of the automobile logistics enterprise and proposed logistics distribution strategy, material classification method, as well as logistics scheduling. Moreover, the simulation technology Simio is employed on assembly line logistics system which helps to find and validate an optimization distribution scheme through simulation experiments. Experimental results indicate that the proposed scheme can solve the logistic balance and levels the material problem and congestion of the unloading pattern in an efficient way as compared to the original method employed by the case company.

LOGISTIC MANAGEMENT INFORMATION SYSTEM - MANUAL DATA STORAGE AND RETRIEVAL SYSTEM.

DTIC Science & Technology

Logistics Management Information System . The procedures are applicable to manual storage and retrieval of all data used in the Logistics Management ... Information System (LMIS) and include the following: (1) Action Officer data source file. (2) Action Officer presentation format file. (3) LMI Coordination

Logistics Reduction and Repurposing Beyond Low Earth Orbit

NASA Technical Reports Server (NTRS)

Ewert, Michael K.; Broyan, James L., Jr.

2012-01-01

All human space missions, regardless of destination, require significant logistical mass and volume that is strongly proportional to mission duration. Anything that can be done to reduce initial mass and volume of supplies or reuse items that have been launched will be very valuable. Often, the logistical items require disposal and represent a trash burden. Logistics contributions to total mission architecture mass can be minimized by considering potential reuse using systems engineering analysis. In NASA's Advanced Exploration Systems "Logistics Reduction and Repurposing Project," various tasks will reduce the intrinsic mass of logistical packaging, enable reuse and repurposing of logistical packaging and carriers for other habitation, life support, crew health, and propulsion functions, and reduce or eliminate the nuisance aspects of trash at the same time. Repurposing reduces the trash burden and eliminates the need for hardware whose function can be provided by use of spent logistical items. However, these reuse functions need to be identified and built into future logical systems to enable them to effectively have a secondary function. These technologies and innovations will help future logistics systems to support multiple exploration missions much more efficiently.

Logistics Reduction and Repurposing Beyond Low Earth Orbit

NASA Technical Reports Server (NTRS)

Broyan, James Lee, Jr.; Ewert, Michael K.

2011-01-01

All human space missions, regardless of destination, require significant logistical mass and volume that is strongly proportional to mission duration. Anything that can be done to reduce initial mass and volume of supplies or reuse items that have been launched will be very valuable. Often, the logistical items require disposal and represent a trash burden. Utilizing systems engineering to analyze logistics from cradle-to-grave and then to potential reuse, can minimize logistics contributions to total mission architecture mass. In NASA's Advanced Exploration Systems Logistics Reduction and Repurposing Project , various tasks will reduce the intrinsic mass of logistical packaging, enable reuse and repurposing of logistical packaging and carriers for other habitation, life support, crew health, and propulsion functions, and reduce or eliminate the nuisances aspects of trash at the same time. Repurposing reduces the trash burden and eliminates the need for hardware whose function can be provided by use of spent logistic items. However, these reuse functions need to be identified and built into future logical systems to enable them to effectively have a secondary function. These technologies and innovations will help future logistic systems to support multiple exploration missions much more efficiently.

Internal Logistics System Selection with Total Cost of Ownership Analysis

NASA Astrophysics Data System (ADS)

Araújo, Inês; Pimentel, Carina; Godina, Radu; Matias, João C. O.

2017-06-01

In this paper a methodology was followed in order to support the decision-making of one industrial unit regarding its internal logistics system. The addressed factory was facing issues with their internal logistics approach. Some alternatives were pointed out and a proper total cost of ownership (TCO) analysis was developed. This analysis was taken in order to demonstrate the more cost-effective solution for the internal logistics system. This tool is more and more valued by the companies, due to their willing to reduce the costs that are associated with the way of doing business. Despite the proposal of the best choice for the internal logistics system of the enterprise, this study also intends to present some conclusions about the match between the nature of the industrial unit and the logistics systems that best fit the requirements of those.

An Interactive Logistics Centre Information Integration System Using Virtual Reality

NASA Astrophysics Data System (ADS)

Hong, S.; Mao, B.

2018-04-01

The logistics industry plays a very important role in the operation of modern cities. Meanwhile, the development of logistics industry has derived various problems that are urgent to be solved, such as the safety of logistics products. This paper combines the study of logistics industry traceability and logistics centre environment safety supervision with virtual reality technology, creates an interactive logistics centre information integration system. The proposed system utilizes the immerse characteristic of virtual reality, to simulate the real logistics centre scene distinctly, which can make operation staff conduct safety supervision training at any time without regional restrictions. On the one hand, a large number of sensor data can be used to simulate a variety of disaster emergency situations. On the other hand, collecting personnel operation data, to analyse the improper operation, which can improve the training efficiency greatly.

Predictors of participant engagement and naloxone utilization in a community-based naloxone distribution program.

PubMed

Rowe, Christopher; Santos, Glenn-Milo; Vittinghoff, Eric; Wheeler, Eliza; Davidson, Peter; Coffin, Philip O

2015-08-01

To describe characteristics of participants and overdose reversals associated with a community-based naloxone distribution program and identify predictors of obtaining naloxone refills and using naloxone for overdose reversal. Bivariate statistical tests were used to compare characteristics of participants who obtained refills and reported overdose reversals versus those who did not. We fitted multiple logistic regression models to identify predictors of refills and reversals; zero-inflated multiple Poisson regression models were used to identify predictors of number of refills and reversals. San Francisco, California, USA. Naloxone program participants registered and reversals reported from 2010 to 2013. Baseline characteristics of participants and reported characteristics of reversals. A total of 2500 participants were registered and 702 reversals were reported from 2010 to 2013. Participants who had witnessed an overdose [adjusted odds ratio (AOR)=2.02, 95% confidence interval (CI)= 1.53-2.66; AOR = 2.73, 95% CI = 1.73-4.30] or used heroin (AOR = 1.85, 95% CI =  1.44-2.37; AOR = 2.19, 95% CI = 1.54-3.13) or methamphetamine (AOR=1.71, 95% CI=1.37-2.15; AOR=1.61, 95% CI=1.18-2.19) had higher odds of obtaining a refill and reporting a reversal, respectively. African American (AOR = 0.63, 95% CI = 0.45-0.88) and Latino (AOR = 0.65, 95% CI =  0.43-1.00) participants had lower odds of obtaining a naloxone refill, whereas Latino participants who obtained at least one refill reported a higher number of refills [incidence rate ratio (IRR) = 1.33 (1.05-1.69)]. Community naloxone distribution programs are capable of reaching sizeable populations of high-risk individuals and facilitating large numbers of overdose reversals. Community members most likely to engage with a naloxone program and use naloxone to reverse an overdose are active drug users. © 2015 Society for the Study of Addiction.

Company Level Logistics on the Future Battlefield.

DTIC Science & Technology

1993-12-17

also expands the terrain envelope in which responsive logistics can be provided. Self diagnostic equipment is currently imbedded in many of our new ...satellite systems, improved sensors, better communications, and long range weapons systems. The combined effect of these systems creates a new ...battlefield. To support combat operations in light of these changes, logistics units must adapt to the new environment. In the past American logistics units

76 FR 24000 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to add a system of records. SUMMARY: The Defense Logistics Agency proposes to add a system of records notice to its existing inventory... Act Officer, Headquarters, Defense Logistics Agency, Attn: DGA, 8725 John J. Kingman Road, Stop 16443...

76 FR 73602 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

...; System of Records AGENCY: Defense Logistics Agency, Department of Defense (DoD). ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records...: Ms. Jody Sinkler, DLA FOIA/Privacy Act Office, Headquarters, Defense Logistics Agency, ATTN: DGA...

76 FR 20339 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-12

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to Alter a System of Records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records notice in its existing... Officer, Headquarters, Defense Logistics Agency, Attn: DGA, 8725 John J. Kingman Road, Stop 16443, Fort...

77 FR 26261 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-03

...; System of Records AGENCY: Office of the Defense Logistics Agency, DoD. ACTION: Notice to alter a system of records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records in its.../Privacy Act Office, Headquarters, Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite...

76 FR 20341 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-12

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to alter a system of records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records notice in its existing... Officer, Headquarters, Defense Logistics Agency, Attn: DGA, 8725 John J. Kingman Road, Stop 16443, Fort...

76 FR 12078 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-04

...; Systems of Records AGENCY: Defense Logistics Agency. ACTION: Notice to alter a system of records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records notice in its existing inventory of... Act Officer, Headquarters, Defense Logistics Agency, Attn: DGA, 8725 John J. Kingman Road, Stop 16443...

76 FR 13991 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-15

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records notice in its existing...-5045, or the Privacy Act Officer, Headquarters Defense Logistics Agency, ATTN: DGA, 8725 John J...

76 FR 28002 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete three systems of records. SUMMARY: The Defense Logistics Agency proposes to delete three systems of records notices in its..., Headquarters Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060...

76 FR 12076 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-04

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records notice in its existing...-5045, or Privacy Act Officer, Headquarters Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman...

Information logistics: A production-line approach to information services

NASA Technical Reports Server (NTRS)

Adams, Dennis; Lee, Chee-Seng

1991-01-01

Logistics can be defined as the process of strategically managing the acquisition, movement, and storage of materials, parts, and finished inventory (and the related information flow) through the organization and its marketing channels in a cost effective manner. It is concerned with delivering the right product to the right customer in the right place at the right time. The logistics function is composed of inventory management, facilities management, communications unitization, transportation, materials management, and production scheduling. The relationship between logistics and information systems is clear. Systems such as Electronic Data Interchange (EDI), Point of Sale (POS) systems, and Just in Time (JIT) inventory management systems are important elements in the management of product development and delivery. With improved access to market demand figures, logisticians can decrease inventory sizes and better service customer demand. However, without accurate, timely information, little, if any, of this would be feasible in today's global markets. Information systems specialists can learn from logisticians. In a manner similar to logistics management, information logistics is concerned with the delivery of the right data, to the ring customer, at the right time. As such, information systems are integral components of the information logistics system charged with providing customers with accurate, timely, cost-effective, and useful information. Information logistics is a management style and is composed of elements similar to those associated with the traditional logistics activity: inventory management (data resource management), facilities management (distributed, centralized and decentralized information systems), communications (participative design and joint application development methodologies), unitization (input/output system design, i.e., packaging or formatting of the information), transportations (voice, data, image, and video communication systems), materials management (data acquisition, e.g., EDI, POS, external data bases, data entry) and production scheduling (job, staff, and project scheduling).

Defense Logistics Agency Did Not Obtain Fair and Reasonable Prices From Meggitt Aircraft Braking Systems for Sole-Source Commercial Spare Parts (REDACTED)

DTIC Science & Technology

2015-05-08

Defense Logistics Agency Did Not Obtain Fair and Reasonable Prices From Meggitt Aircraft Braking Systems for Sole-Source Commercial Spare Parts...Defense Logistics Agency Did Not Obtain Fair and Reasonable Prices From Meggitt Aircraft Braking Systems for Sole-Source Commercial Spare Parts...D000AH-0180.000) │ i Results in Brief Defense Logistics Agency Did Not Obtain Fair and Reasonable Prices From Meggitt Aircraft Braking Systems for

Generation of and control measures for, e-waste in Hong Kong

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chung Shanshan, E-mail: sschung@hkbu.edu.hk; Lau Kayan; Zhang Chan

2011-03-15

While accurately estimating electrical and electronic waste (e-waste) generation is important for building appropriate infrastructure for its collection and recycling, making reliable estimates of this kind is difficult in Hong Kong owing to the fact that neither accurate trade statistics nor sales data of relevant products are available. In view of this, data of e-products consumption at household level was collected by a tailor-made questionnaire survey from the public for obtaining a reasonable e-waste generation estimate. It was estimated that on average no more than 80,443 tonnes (11.5 kg/capita) of waste is generated from non-plasma and non-liquid crystal display televisions,more » refrigerators, washing machines, air-conditioners and personal computers each year by Hong Kong households. However, not more than 17% of this is disposed as waste despite a producer responsibility scheme (PRS) not being in place because of the existence of a vibrant e-waste trading sector. The form of PRS control that can possibly win most public support is one that would involve the current e-waste traders as a major party in providing the reverse logistics with a visible recycling charge levied at the point of importation. This reverse logistic service should be convenient, reliable and highly accessible to the consumers.« less

Generation of and control measures for, e-waste in Hong Kong.

PubMed

Chung, Shan-shan; Lau, Ka-yan; Zhang, Chan

2011-03-01

While accurately estimating electrical and electronic waste (e-waste) generation is important for building appropriate infrastructure for its collection and recycling, making reliable estimates of this kind is difficult in Hong Kong owing to the fact that neither accurate trade statistics nor sales data of relevant products are available. In view of this, data of e-products consumption at household level was collected by a tailor-made questionnaire survey from the public for obtaining a reasonable e-waste generation estimate. It was estimated that on average no more than 80,443 tones (11.5 kg/capita) of waste is generated from non-plasma and non-liquid crystal display televisions, refrigerators, washing machines, air-conditioners and personal computers each year by Hong Kong households. However, not more than 17% of this is disposed as waste despite a producer responsibility scheme (PRS) not being in place because of the existence of a vibrant e-waste trading sector. The form of PRS control that can possibly win most public support is one that would involve the current e-waste traders as a major party in providing the reverse logistics with a visible recycling charge levied at the point of importation. This reverse logistic service should be convenient, reliable and highly accessible to the consumers. Copyright © 2010 Elsevier Ltd. All rights reserved.

Measuring decision weights in recognition experiments with multiple response alternatives: comparing the correlation and multinomial-logistic-regression methods.

PubMed

Dai, Huanping; Micheyl, Christophe

2012-11-01

Psychophysical "reverse-correlation" methods allow researchers to gain insight into the perceptual representations and decision weighting strategies of individual subjects in perceptual tasks. Although these methods have gained momentum, until recently their development was limited to experiments involving only two response categories. Recently, two approaches for estimating decision weights in m-alternative experiments have been put forward. One approach extends the two-category correlation method to m > 2 alternatives; the second uses multinomial logistic regression (MLR). In this article, the relative merits of the two methods are discussed, and the issues of convergence and statistical efficiency of the methods are evaluated quantitatively using Monte Carlo simulations. The results indicate that, for a range of values of the number of trials, the estimated weighting patterns are closer to their asymptotic values for the correlation method than for the MLR method. Moreover, for the MLR method, weight estimates for different stimulus components can exhibit strong correlations, making the analysis and interpretation of measured weighting patterns less straightforward than for the correlation method. These and other advantages of the correlation method, which include computational simplicity and a close relationship to other well-established psychophysical reverse-correlation methods, make it an attractive tool to uncover decision strategies in m-alternative experiments.

Ultrasound predictors of neonatal outcome in intrauterine growth restriction.

PubMed

Craigo, S D; Beach, M L; Harvey-Wilkes, K B; D'Alton, M E

1996-11-01

Our purpose was to assess the value of commonly performed ultrasound parameters in predicting neonatal outcome of fetuses with intrauterine growth restriction (IUGR). One hundred twenty-seven patients were identified on ultrasound examination to have IUGR. Estimated weight percentile, amniotic fluid volume, umbilical artery Doppler velocimetry, and head circumference/abdominal circumference ratio were compared with neonatal outcome. Thirty infants had severely adverse courses. The degree of growth restriction was strongly associated with adverse outcome and neonatal death. Umbilical artery Doppler waveforms with absent or reverse end-diastolic flow were predicted of neonatal death, bronchopulmonary dysplasia (BPD), necrotizing enterocolitis (NEC), and adverse outcome in general. Oligohydramnios was predictive of adverse outcome and neonatal death. Logistic regression also showed that absent or reverse end-diastolic flow and oligohydramnios were independent predictors of adverse outcome. Ultrasound findings of low estimated weight percentile, absent or reverse end-diastolic umbilical blood flow, and oligohydramnios are independent predictors of adverse neonatal outcome of growth restricted fetuses.

77 FR 65370 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-26

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to Alter a System of Records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records in its inventory of record... Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060-6221, or by phone...

77 FR 3238 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-23

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice To Amend a System of Records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records in its inventory of record... Office, Headquarters, Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort...

76 FR 39390 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-06

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records notice in its existing... Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060-6221...

76 FR 65185 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-20

...; System of Records AGENCY: Defense Logistics Agency, Department of Defense. ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records notice... Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060-6221, or by phone...

77 FR 9632 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-17

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to Amend a System of Records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records in its inventory of record... Office, Headquarters, Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort...

76 FR 11213 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-01

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete a system of records. SUMMARY: The Defense Logistics Agency proposes to delete a system of records notice in its existing..., Headquarters Defense Logistics Agency, Attn: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060...

76 FR 26714 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-09

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to Delete a System of Records. SUMMARY: The Defense Logistics Agency proposes to delete a system of records notice in its existing..., Headquarters Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060...

76 FR 11213 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-01

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete a system of records. SUMMARY: The Defense Logistics Agency proposes to delete a system of records notice in its existing..., Headquarters Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060...

76 FR 76149 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-06

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to Amend a System of Records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records notice in its existing...: Ms. Jody Sinkler at (703) 767-5045, or DLA FOIA/Privacy Act Office, Headquarters, Defense Logistics...

32 CFR 323.6 - Exemption rules.

Code of Federal Regulations, 2013 CFR

2013-07-01

... DEFENSE LOGISTICS AGENCY PRIVACY PROGRAM § 323.6 Exemption rules. (a) The Director, DLA or designee may... proceedings. (c) Exempt Records Systems. All systems of records maintained by the Defense Logistics Agency... Identifier: S500.20 (Specific exemption). (1) System name: Defense Logistics Agency (DLA) Criminal Incident...

32 CFR 323.6 - Exemption rules.

Code of Federal Regulations, 2014 CFR

2014-07-01

... DEFENSE LOGISTICS AGENCY PRIVACY PROGRAM § 323.6 Exemption rules. (a) The Director, DLA or designee may... proceedings. (c) Exempt Records Systems. All systems of records maintained by the Defense Logistics Agency... Identifier: S500.20 (Specific exemption). (1) System name: Defense Logistics Agency (DLA) Criminal Incident...

Logistics Reduction Technologies for Exploration Missions

NASA Technical Reports Server (NTRS)

Broyan, James L., Jr.; Ewert, Michael K.; Fink, Patrick W.

2014-01-01

Human exploration missions under study are very limited by the launch mass capacity of existing and planned vehicles. The logistical mass of crew items is typically considered separate from the vehicle structure, habitat outfitting, and life support systems. Consequently, crew item logistical mass is typically competing with vehicle systems for mass allocation. NASA's Advanced Exploration Systems (AES) Logistics Reduction and Repurposing (LRR) Project is developing five logistics technologies guided by a systems engineering cradle-to-grave approach to enable used crew items to augment vehicle systems. Specifically, AES LRR is investigating the direct reduction of clothing mass, the repurposing of logistical packaging, the use of autonomous logistics management technologies, the processing of spent crew items to benefit radiation shielding and water recovery, and the conversion of trash to propulsion gases. The systematic implementation of these types of technologies will increase launch mass efficiency by enabling items to be used for secondary purposes and improve the habitability of the vehicle as the mission duration increases. This paper provides a description and the challenges of the five technologies under development and the estimated overall mission benefits of each technology.

Right ventricular relative wall thickness as a predictor of outcomes and of right ventricular reverse remodeling for patients with pulmonary hypertension.

PubMed

Sano, Hiroyuki; Tanaka, Hidekazu; Motoji, Yoshiki; Fukuda, Yuko; Mochizuki, Yasuhide; Hatani, Yutaka; Matsuzoe, Hiroki; Hatazawa, Keiko; Shimoura, Hiroyuki; Ooka, Junichi; Ryo-Koriyama, Keiko; Nakayama, Kazuhiko; Matsumoto, Kensuke; Emoto, Noriaki; Hirata, Ken-Ichi

2017-03-01

Mid-term right ventricular (RV) reverse remodeling after treatment in patients with pulmonary hypertension (PH) is associated with long-term outcome as well as baseline RV remodeling. However, baseline factors influencing mid-term RV reverse remodeling after treatment and its prognostic capability remain unclear. We studied 54 PH patients. Mid-term RV remodeling was assessed in terms of the RV area, which was traced planimetrically at the end-systole (RVESA). RV reverse remodeling was defined as a relative decrease in the RVESA of at least 15% at 10.2 ± 9.4 months after treatment. Long-term follow-up was 5 years. Adverse events occurred in ten patients (19%) and mid-term RV reverse remodeling after treatment was observed in 37 (69%). Patients with mid-term RV reverse remodeling had more favorable long-term outcomes than those without (log-rank: p = 0.01). Multivariate logistic regression analysis showed that RV relative wall thickness (RV-RWT), as calculated as RV free-wall thickness/RV basal linear dimension at end-diastole, was an independent predictor of mid-term RV reverse remodeling (OR 1.334; 95% CI, 1.039-1.713; p = 0.03). Moreover, patients with RV-RWT ≥0.21 showed better long-term outcomes than did those without (log-rank p = 0.03), while those with RV-RWT ≥0.21 and mid-term RV reverse remodeling had the best long-term outcomes. Patients with RV-RWT <0.21 and without mid-term RV reverse remodeling, on the other hand, had worse long-term outcomes than other sub-groups. In conclusions, RV-RWT could predict mid-term RV reverse remodeling after treatment in PH patients, and was associated with long-term outcomes. Our finding may have clinical implications for better management of PH patients.

Logistics engineering education from the point of view environment

NASA Astrophysics Data System (ADS)

Bányai, Ágota

2010-05-01

A new field of MSc programme offered by the Faculty of Mechanical Engineering and Informatics of the University of Miskolc is represented by the programme in logistics engineering. The Faculty has always laid great emphasis on assigning processes connected with environment protection and globalisation issues the appropriate weight in its programmes. This is based on the fact that the Faculty has initiated and been involved in a great number of research and development projects with a substantial emphasis on the fundamental principles of sustainable development. The objective of the programme of logistics engineering is to train engineers who, in possession of the science, engineering, economic, informatics and industrial, transportation technological knowledge related to the professional field of logistics, are able to analyse, design, organise, and control logistics processes and systems (freight transportation, materials handling, storage, commissioning, loading, purchasing, distribution and waste management) as well as to design and develop machinery and equipment as the elements of logistic systems and also to be involved in their manufacture and quality control and are able to control their operation. The programme prepares its students for performing the logistics management tasks in a company, for creative participation in solving research and development problems in logistics and for pursuing logistics studies in doctoral programmes. There are several laboratories available for practice-oriented training. The 'Integrated Logistics Laboratory' consists of various fixed and mobile, real industrial, i.e. not model-level equipment, the integration of which in one system facilitates not only the presentation, examination and development of the individual self-standing facilities, but the study of their interaction as well in terms of mechatronics, engineering, control engineering, informatics, identification technology and logistics. The state-of-the-art, reliable, automated mechatronics-material flow system with its single control engineering system provides the academic staff with up-to-date research facilities, and enables the students to study sophisticated equipment and systems that could also operate under industrial conditions, thus offering knowledge that can be efficiently utilised in the industry after graduation. The laboratory measurements of the programme in logistics engineering are performed in this laboratory, and they are supplemented by the theoretical and practical measurements in the ‘Robotic Technology Assembly Laboratory', the ‘Power Electronics Laboratory', the ‘Mechatronics Laboratory', the ‘CAD/CAM Laboratory' and the ‘Acoustics and Product Laboratory'. The bodies of knowledge connected with environment protection and sustainable development can be grouped around three large topic areas. In environmental economics the objective is to present the corporate-organisational aspects of environmental management. Putting environmental management in the focal point, the objective of the programme is to impart knowledge that can be utilised in practice which can be used to shift the relation between the organisation and its environment in the direction of sustainability. The tools include environmental controlling, environmental marketing and various solutions of environmental performance evaluation. The second large topic area is globalization and its logistic aspects. In the field of global logistics the following knowledge carries special weight: logistic challenges in a globalised world; the concept of global logistics, its conditions and effects; delayed manufacture, assembly, packaging; the economic investigation of delayed assembly; globalised purchase and distribution in logistics; the logistic features of the globalised production supply/distribution chain; meta-logistics systems; logistics-related EU harmonisation issues; the effect of e-commerce on the global logistic system; logistic centres, connecting virtual logistic companies in a network; the environmental harmonisation of international transportation. The third large area is recycling logistics. Here the bodies of knowledge are as follows: the concept of developing a ‘closed-loop economy'; stages in the progress of products after discarding, connections between the uses of waste collection, processing, selection, deposition or reuse processes; features of European recommendations (e.g. EMAS), harmonisation of national practices and global solutions; presenting the logistics part-processes of recycling; presenting process organisation procedures for the foundation of designing one-route, multi-route, replacement container waste collecting and distributing part systems; recycling strategies with consideration of logistically serving the separation and storage of waste to be deposited, the technological processing systems of recyclable materials; presenting dismantling and product and material identification technologies, presenting logistics part-tasks, analysis of technical solutions; IT solutions for identifying products and their elements to be distributed and withdrawn from distribution after use (e.g. RFID systems) and monitoring their material flow; methodology of using efficiency analyses and incentive systems in the decision making processes of recycling processes, risk analysis for evaluating typical part processes; the methodology of recycling-oriented product design for specific product groups. Graduates of the Master programmes are able to use and utilise the knowledge obtained in practice, use problem-solving techniques; process the information, new problems and new phenomena arising in the border areas of the professional experience gained the discipline; formulate substantial criticism and opinions as far as possible, make decisions and draw conclusions; comprehending and solving the problems arising, suggesting original ideas; plan and perform tasks independently at a high professional standard; improve themselves, develop their knowledge to higher levels; view the management of technical/engineering - economic - human resources in a complex way; design complex systems in a global way based on a system-oriented and process-oriented way of thinking; use integrated knowledge from the professional fields of transport, mobile machinery, process theory, industrial production processes, electronics and informatics; combine the part processes of logistics systems and the part units performing their physical realisation (materials handling equipment, sensors, actuators, control systems, and database systems, etc.); perform state evaluations depending on their specialisation, use them to elaborate evaluations and recommendations, develop complex logistic systems, design, organise and control them at the highest level. This work was implemented with support by the European Union and co-funding of the European Social Fund.

On the efficiency of the image encryption and decryption by using logistic-sine chaotic system and logistic-tent chaotic system

NASA Astrophysics Data System (ADS)

Chiun, Lee Chia; Mandangan, Arif; Daud, Muhamad Azlan; Hussin, Che Haziqah Che

2017-04-01

We may secure the content of text, audio, image and video during their transmission from one party to another party via an open channel such as the internet by using cryptograph. Logistic-Sine System (LSS) is a combination on two 1D chaotic maps which are Logistic Map and Sine Map. By applying the LSS into cryptography, the image encryption and decryption can be performed. This study is focusing on the performance test of the image encryption and decryption processes by using the LSS. For comparison purpose, we compare the performance of the encryption and decryption by using two different chaotic systems, which are the LSS and Logistic-Tent System (LTS). The result shows that system with LSS is less efficient than LTS in term of encryption time but both systems have similar efficiency in term of decryption time.

32 CFR Appendix H to Part 323 - DLA Exemption Rules

Code of Federal Regulations, 2012 CFR

2012-07-01

... PROGRAM DEFENSE LOGISTICS AGENCY PRIVACY PROGRAM Pt. 323, App. H Appendix H to Part 323—DLA Exemption Rules Exempted Records Systems. All systems of records maintained by the Defense Logistics Agency will.... b. ID: S500.20 (Specific exemption). 1. System name: Defense Logistics Agency Criminal Incident...

14 CFR 25.934 - Turbojet engine thrust reverser system tests.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Turbojet engine thrust reverser system... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant General § 25.934 Turbojet engine thrust reverser system tests. Thrust reversers installed on turbojet engines must meet the...

Static Performance of Six Innovative Thrust Reverser Concepts for Subsonic Transport Applications: Summary of the NASA Langley Innovative Thrust Reverser Test Program

NASA Technical Reports Server (NTRS)

Asbury, Scott C.; Yetter, Jeffrey A.

2000-01-01

The NASA Langley Configuration Aerodynamics Branch has conducted an experimental investigation to study the static performance of innovative thrust reverser concepts applicable to high-bypass-ratio turbofan engines. Testing was conducted on a conventional separate-flow exhaust system configuration, a conventional cascade thrust reverser configuration, and six innovative thrust reverser configurations. The innovative thrust reverser configurations consisted of a cascade thrust reverser with porous fan-duct blocker, a blockerless thrust reverser, two core-mounted target thrust reversers, a multi-door crocodile thrust reverser, and a wing-mounted thrust reverser. Each of the innovative thrust reverser concepts offer potential weight savings and/or design simplifications over a conventional cascade thrust reverser design. Testing was conducted in the Jet-Exit Test Facility at NASA Langley Research Center using a 7.9%-scale exhaust system model with a fan-to-core bypass ratio of approximately 9.0. All tests were conducted with no external flow and cold, high-pressure air was used to simulate core and fan exhaust flows. Results show that the innovative thrust reverser concepts achieved thrust reverser performance levels which, when taking into account the potential for system simplification and reduced weight, may make them competitive with, or potentially more cost effective than current state-of-the-art thrust reverser systems.

The Application of Collaborative Business Intelligence Technology in the Hospital SPD Logistics Management Model.

PubMed

Liu, Tongzhu; Shen, Aizong; Hu, Xiaojian; Tong, Guixian; Gu, Wei

2017-06-01

We aimed to apply collaborative business intelligence (BI) system to hospital supply, processing and distribution (SPD) logistics management model. We searched Engineering Village database, China National Knowledge Infrastructure (CNKI) and Google for articles (Published from 2011 to 2016), books, Web pages, etc., to understand SPD and BI related theories and recent research status. For the application of collaborative BI technology in the hospital SPD logistics management model, we realized this by leveraging data mining techniques to discover knowledge from complex data and collaborative techniques to improve the theories of business process. For the application of BI system, we: (i) proposed a layered structure of collaborative BI system for intelligent management in hospital logistics; (ii) built data warehouse for the collaborative BI system; (iii) improved data mining techniques such as supporting vector machines (SVM) and swarm intelligence firefly algorithm to solve key problems in hospital logistics collaborative BI system; (iv) researched the collaborative techniques oriented to data and business process optimization to improve the business processes of hospital logistics management. Proper combination of SPD model and BI system will improve the management of logistics in the hospitals. The successful implementation of the study requires: (i) to innovate and improve the traditional SPD model and make appropriate implement plans and schedules for the application of BI system according to the actual situations of hospitals; (ii) the collaborative participation of internal departments in hospital including the department of information, logistics, nursing, medical and financial; (iii) timely response of external suppliers.

dLOGIS: Disaster Logistics Information System

NASA Astrophysics Data System (ADS)

Koesuma, Sorja; Riantana, Rio; Siswanto, Budi; Aji Purnomo, Fendi; Lelono, Sarjoko

2017-11-01

There are three timing of disaster mitigation which is pre-disaster, emergency response and post-disaster. All of those is important in disaster mitigation, but emergency response is important when we are talking about time. Emergency response has limited time when we should give help. Rapid assessment of kind of logistic, the number of survivors, number children and old people, their gender and also for difable person. It should be done in emergency response time. Therefore we make a mobile application for logistics management system. The name of application is dLOGIS, i.e. Disaster Logistics Information System. The application is based on Android system for mobile phone. Otherwise there is also website version. The website version is for maintenance, data input and registration. So the people or government can use it directly when there is a disaster. After login in dLOGIS, there is five main menus. The first main menu shows disaster information, refugees conditions, logistics needed, available logistics stock and already accepted logistics. In the second menu is used for entering survivors data. The field coordinator can enter survivors data based on the rapid assessment in disaster location. The third menu is used for entering kind of logistic. Number and kind of logistics are based on the BNPB needed standard for the survivor. The fourth menu displays the logistics stock available in field coordinator. And the last menu displays the logistics help that already accepted and sent by donation. By using this application when a disaster happened, field coordinator or local government can use maintenance distribution of logistics base on their needs. Also for donor people who will give help to survivor, they can give logistics with the corresponding of survivor needs.

Reserve Component Logistics Responsibilities in the Total Force,

DTIC Science & Technology

1982-10-01

It diferent from Report) 14. SUPPLEMENTARY NOTES Four Service-specific Working Notes are included as Appendices. 19. KEY WORDS (Continue on reverse...During the balance of the task, we will augment the data presented in this working note with: - time phasing of RC units after mobilization for a NATO or...aerial refueling During the balance of the task, we will augment the data presented in this working paper with: - time phasings of RC units after

Reverse Algols

NASA Technical Reports Server (NTRS)

Leung, K. C.

1989-01-01

Reverse Algols, binary systems with a semidetached configuration in which the more massive component is in contact with the critical equipotential surface, are examined. Observational evidence for reverse Algols is presented and the parameters of seven reverse Algols are listed. The evolution of Algols and reverse Algols is discussed. It is suggested that, because reverse Algols represent the premass-reversal semidetached phase of close binary evolution, the evolutionary time scale between regular and reverse Algols is the ratio of the number of confirmed systems of these two Algol types.

Reverse Engineering and Security Evaluation of Commercial Tags for RFID-Based IoT Applications.

PubMed

Fernández-Caramés, Tiago M; Fraga-Lamas, Paula; Suárez-Albela, Manuel; Castedo, Luis

2016-12-24

The Internet of Things (IoT) is a distributed system of physical objects that requires the seamless integration of hardware (e.g., sensors, actuators, electronics) and network communications in order to collect and exchange data. IoT smart objects need to be somehow identified to determine the origin of the data and to automatically detect the elements around us. One of the best positioned technologies to perform identification is RFID (Radio Frequency Identification), which in the last years has gained a lot of popularity in applications like access control, payment cards or logistics. Despite its popularity, RFID security has not been properly handled in numerous applications. To foster security in such applications, this article includes three main contributions. First, in order to establish the basics, a detailed review of the most common flaws found in RFID-based IoT systems is provided, including the latest attacks described in the literature. Second, a novel methodology that eases the detection and mitigation of such flaws is presented. Third, the latest RFID security tools are analyzed and the methodology proposed is applied through one of them (Proxmark 3) to validate it. Thus, the methodology is tested in different scenarios where tags are commonly used for identification. In such systems it was possible to clone transponders, extract information, and even emulate both tags and readers. Therefore, it is shown that the methodology proposed is useful for auditing security and reverse engineering RFID communications in IoT applications. It must be noted that, although this paper is aimed at fostering RFID communications security in IoT applications, the methodology can be applied to any RFID communications protocol.

Reverse Engineering and Security Evaluation of Commercial Tags for RFID-Based IoT Applications

PubMed Central

Fernández-Caramés, Tiago M.; Fraga-Lamas, Paula; Suárez-Albela, Manuel; Castedo, Luis

2016-01-01

The Internet of Things (IoT) is a distributed system of physical objects that requires the seamless integration of hardware (e.g., sensors, actuators, electronics) and network communications in order to collect and exchange data. IoT smart objects need to be somehow identified to determine the origin of the data and to automatically detect the elements around us. One of the best positioned technologies to perform identification is RFID (Radio Frequency Identification), which in the last years has gained a lot of popularity in applications like access control, payment cards or logistics. Despite its popularity, RFID security has not been properly handled in numerous applications. To foster security in such applications, this article includes three main contributions. First, in order to establish the basics, a detailed review of the most common flaws found in RFID-based IoT systems is provided, including the latest attacks described in the literature. Second, a novel methodology that eases the detection and mitigation of such flaws is presented. Third, the latest RFID security tools are analyzed and the methodology proposed is applied through one of them (Proxmark 3) to validate it. Thus, the methodology is tested in different scenarios where tags are commonly used for identification. In such systems it was possible to clone transponders, extract information, and even emulate both tags and readers. Therefore, it is shown that the methodology proposed is useful for auditing security and reverse engineering RFID communications in IoT applications. It must be noted that, although this paper is aimed at fostering RFID communications security in IoT applications, the methodology can be applied to any RFID communications protocol. PMID:28029119

P.C. disposal decisions: a banking industry case study

NASA Astrophysics Data System (ADS)

Shah, Sejal P.; Sarkis, Joseph

2002-02-01

The service industry and the manufacturing industry are interlinked in a supply chain situation. Part of the effectiveness of some manufacturing industry environmental performance based on remanufacturing and recycling is dependent on service industry decisions. In the information technology arena, personal computers (PCs) are the hard equipment of the service industry. The end-of-life decisions made by the service industry, and in this case the banking industry will have implications for the amount of systems within the waste or reverse logistics stream for manufacturers. Looking at some of the issues (and presenting a model for evaluation) related to decision making concerning end-of-life disposition for PCs is something this paper investigates. The analytical hierarchy process (AHP) is applied in this circumstance. The development of the model, its application, and results, provide the basis for much of the discussion in this paper.

Research on support effectiveness modeling and simulating of aviation materiel autonomic logistics system

NASA Astrophysics Data System (ADS)

Zhou, Yan; Zhou, Yang; Yuan, Kai; Jia, Zhiyu; Li, Shuo

2018-05-01

Aiming at the demonstration of autonomic logistics system to be used at the new generation of aviation materiel in our country, the modeling and simulating method of aviation materiel support effectiveness considering autonomic logistics are studied. Firstly, this paper introduced the idea of JSF autonomic logistics and analyzed the influence of autonomic logistics on support effectiveness from aspects of reliability, false alarm rate, troubleshooting time, and support delay time and maintenance level. On this basis, the paper studies the modeling and simulating methods of support effectiveness considering autonomic logistics, and puts forward the maintenance support simulation process considering autonomic logistics. Finally, taking the typical aviation materiel as an example, this paper analyzes and verifies the above-mentioned support effectiveness modeling and simulating method of aviation materiel considering autonomic logistics.

On the applicability of low-dimensional models for convective flow reversals at extreme Prandtl numbers

NASA Astrophysics Data System (ADS)

Mannattil, Manu; Pandey, Ambrish; Verma, Mahendra K.; Chakraborty, Sagar

2017-12-01

Constructing simpler models, either stochastic or deterministic, for exploring the phenomenon of flow reversals in fluid systems is in vogue across disciplines. Using direct numerical simulations and nonlinear time series analysis, we illustrate that the basic nature of flow reversals in convecting fluids can depend on the dimensionless parameters describing the system. Specifically, we find evidence of low-dimensional behavior in flow reversals occurring at zero Prandtl number, whereas we fail to find such signatures for reversals at infinite Prandtl number. Thus, even in a single system, as one varies the system parameters, one can encounter reversals that are fundamentally different in nature. Consequently, we conclude that a single general low-dimensional deterministic model cannot faithfully characterize flow reversals for every set of parameter values.

Is decentralization good for logistics systems? Evidence on essential medicine logistics in Ghana and Guatemala.

PubMed

Bossert, Thomas J; Bowser, Diana M; Amenyah, Johnnie K

2007-03-01

Efficient logistics systems move essential medicines down the supply chain to the service delivery point, and then to the end user. Experts on logistics systems tend to see the supply chain as requiring centralized control to be most effective. However, many health reforms have involved decentralization, which experts fear has disrupted the supply chain and made systems less effective. There is no consensus on an appropriate methodology for assessing the effectiveness of decentralization in general, and only a few studies have attempted to address decentralization of logistics systems. This paper sets out a framework and methodology of a pioneering exploratory study that examines the experiences of decentralization in two countries, Guatemala and Ghana, and presents suggestive results of how decentralization affected the performance of their logistics systems. The analytical approach assessed decentralization using the principal author's 'decision space' approach, which defines decentralization as the degree of choice that local officials have over different health system functions. In this case the approach focused on 15 different logistics functions and measured the relationship between the degree of choice and indicators of performance for each of the functions. The results of both studies indicate that less choice (i.e. more centralized) was associated with better performance for two key functions (inventory control and information systems), while more choice (i.e. more decentralized) over planning and budgeting was associated with better performance. With different systems of procurement in Ghana and Guatemala, we found that a system with some elements of procurement that are centralized (selection of firms and prices fixed by national tender) was positively related in Guatemala but negatively related in Ghana, where a system of 'cash and carry' cost recovery allowed more local choice. The authors conclude that logistics systems can be effectively decentralized for some functions while others should remain centralized. These preliminary findings, however, should be subject to alternative methodologies to confirm the findings.

High stoma prevalence and stoma reversal complications following anterior resection for rectal cancer: a population-based multicentre study.

PubMed

Holmgren, K; Kverneng Hultberg, D; Haapamäki, M M; Matthiessen, P; Rutegård, J; Rutegård, M

2017-12-01

Fashioning a defunctioning stoma is common when performing an anterior resection for rectal cancer in order to avoid and mitigate the consequences of an anastomotic leakage. We investigated the permanent stoma prevalence, factors influencing stoma outcome and complication rates following stoma reversal surgery. Patients who had undergone an anterior resection for rectal cancer between 2007 and 2013 in the northern healthcare region were identified using the Swedish Colorectal Cancer Registry and were followed until the end of 2014 regarding stoma outcome. Data were retrieved by a review of medical records. Multiple logistic regression was used to evaluate predefined risk factors for stoma permanence. Risk factors for non-reversal of a defunctioning stoma were also analysed, using Cox proportional-hazards regression. A total of 316 patients who underwent anterior resection were included, of whom 274 (87%) were defunctioned primarily. At the end of the follow-up period 24% had a permanent stoma, and 9% of patients who underwent reversal of a stoma experienced major complications requiring a return to theatre, need for intensive care or mortality. Anastomotic leakage and tumour Stage IV were significant risk factors for stoma permanence. In this series, partial mesorectal excision correlated with a stoma-free outcome. Non-reversal was considerably more prevalent among patients with leakage and Stage IV; Stage III patients at first had a decreased reversal rate, which increased after the initial year of surgery. Stoma permanence is common after anterior resection, while anastomotic leakage and advanced tumour stage decrease the chances of a stoma-free outcome. Stoma reversal surgery entails a significant risk of major complications. Colorectal Disease © 2017 The Association of Coloproctology of Great Britain and Ireland.

Sleep Duration and Midday Napping with 5-Year Incidence and Reversion of Metabolic Syndrome in Middle-Aged and Older Chinese.

PubMed

Yang, Liangle; Xu, Zengguang; He, Meian; Yang, Handong; Li, Xiulou; Min, Xinwen; Zhang, Ce; Xu, Chengwei; Angileri, Francesca; Légaré, Sébastien; Yuan, Jing; Miao, Xiaoping; Guo, Huan; Yao, Ping; Wu, Tangchun; Zhang, Xiaomin

2016-11-01

Prospective evidence on the association of sleep duration and midday napping with metabolic syndrome (MetS) is limited. We aimed to examine the associations of sleep duration and midday napping with risk of incidence and reversion of MetS and its components among a middle-aged and older Chinese population. We included 14,399 subjects from the Dongfeng-Tongji (DFTJ) Cohort Study (2008-2013) who were free of coronary heart disease, stroke, and cancer at baseline. Baseline data were obtained by questionnaires and health examinations. Odds ratios (ORs) and 95% confidence interval (CI) were derived from multivariate logistic regression models. After controlling for potential covariates, longer sleep duration (≥ 9 h) was associated with a higher risk of MetS incidence (OR, 1.29; 95% CI, 1.08-1.55) and lower reversion of MetS (OR, 0.80; 95% CI, 0.66-0.96) compared with sleep duration of 7 to < 8 h; whereas shorter sleep duration (< 6 h) was not related to incidence or reversion of MetS. For midday napping, subjects with longer napping (≥ 90 min) was also associated with a higher risk of MetS incidence and a lower risk of MetS reversion compared with those with napping of 1 to < 30 min (OR, 1.48; 95% CI, 1.05-2.10 and OR, 0.70; 95% CI, 0.52-0.94, respectively). Significance for incidence or reversion of certain MetS components remained in shorter and longer sleepers but disappeared across napping categories. Both longer sleep duration and longer midday napping were potential risk factors for MetS incidence, and concurrently exert adverse effects on MetS reversion. © 2016 Associated Professional Sleep Societies, LLC.

The Application of Collaborative Business Intelligence Technology in the Hospital SPD Logistics Management Model

PubMed Central

LIU, Tongzhu; SHEN, Aizong; HU, Xiaojian; TONG, Guixian; GU, Wei

2017-01-01

Background: We aimed to apply collaborative business intelligence (BI) system to hospital supply, processing and distribution (SPD) logistics management model. Methods: We searched Engineering Village database, China National Knowledge Infrastructure (CNKI) and Google for articles (Published from 2011 to 2016), books, Web pages, etc., to understand SPD and BI related theories and recent research status. For the application of collaborative BI technology in the hospital SPD logistics management model, we realized this by leveraging data mining techniques to discover knowledge from complex data and collaborative techniques to improve the theories of business process. Results: For the application of BI system, we: (i) proposed a layered structure of collaborative BI system for intelligent management in hospital logistics; (ii) built data warehouse for the collaborative BI system; (iii) improved data mining techniques such as supporting vector machines (SVM) and swarm intelligence firefly algorithm to solve key problems in hospital logistics collaborative BI system; (iv) researched the collaborative techniques oriented to data and business process optimization to improve the business processes of hospital logistics management. Conclusion: Proper combination of SPD model and BI system will improve the management of logistics in the hospitals. The successful implementation of the study requires: (i) to innovate and improve the traditional SPD model and make appropriate implement plans and schedules for the application of BI system according to the actual situations of hospitals; (ii) the collaborative participation of internal departments in hospital including the department of information, logistics, nursing, medical and financial; (iii) timely response of external suppliers. PMID:28828316

The Automated Logistics Element Planning System (ALEPS)

NASA Technical Reports Server (NTRS)

Schwaab, Douglas G.

1991-01-01

The design and functions of ALEPS (Automated Logistics Element Planning System) is a computer system that will automate planning and decision support for Space Station Freedom Logistical Elements (LEs) resupply and return operations. ALEPS provides data management, planning, analysis, monitoring, interfacing, and flight certification for support of LE flight load planning activities. The prototype ALEPS algorithm development is described.

Just-In-Time Logistics

DTIC Science & Technology

2006-02-07

consumer confidence will boost and “just- in-time” logistics will be the lighter and leaner combat logistics support the Marine Corps has desperately...stove-piped logistics systems have done little to build customer or “warrior confidence”. Customers who requesting assets from the supply system...have become used to waiting thirty plus days to receive the asset. Consumers outside of the Marine Corps would refuse to accept such delays, but

Logistics Reduction Technologies for Exploration Missions

NASA Technical Reports Server (NTRS)

Broyan, James L., Jr.; Ewert, Michael K.; Fink, Patrick W.

2014-01-01

Human exploration missions under study are limited by the launch mass capacity of existing and planned launch vehicles. The logistical mass of crew items is typically considered separate from the vehicle structure, habitat outfitting, and life support systems. Although mass is typically the focus of exploration missions, due to its strong impact on launch vehicle and habitable volume for the crew, logistics volume also needs to be considered. NASA's Advanced Exploration Systems (AES) Logistics Reduction and Repurposing (LRR) Project is developing six logistics technologies guided by a systems engineering cradle-to-grave approach to enable after-use crew items to augment vehicle systems. Specifically, AES LRR is investigating the direct reduction of clothing mass, the repurposing of logistical packaging, the use of autonomous logistics management technologies, the processing of spent crew items to benefit radiation shielding and water recovery, and the conversion of trash to propulsion gases. Reduction of mass has a corresponding and significant impact to logistical volume. The reduction of logistical volume can reduce the overall pressurized vehicle mass directly, or indirectly benefit the mission by allowing for an increase in habitable volume during the mission. The systematic implementation of these types of technologies will increase launch mass efficiency by enabling items to be used for secondary purposes and improve the habitability of the vehicle as mission durations increase. Early studies have shown that the use of advanced logistics technologies can save approximately 20 m(sup 3) of volume during transit alone for a six-person Mars conjunction class mission.

Chemical reactions in reverse micelle systems

DOEpatents

Matson, Dean W.; Fulton, John L.; Smith, Richard D.; Consani, Keith A.

1993-08-24

This invention is directed to conducting chemical reactions in reverse micelle or microemulsion systems comprising a substantially discontinuous phase including a polar fluid, typically an aqueous fluid, and a microemulsion promoter, typically a surfactant, for facilitating the formation of reverse micelles in the system. The system further includes a substantially continuous phase including a non-polar or low-polarity fluid material which is a gas under standard temperature and pressure and has a critical density, and which is generally a water-insoluble fluid in a near critical or supercritical state. Thus, the microemulsion system is maintained at a pressure and temperature such that the density of the non-polar or low-polarity fluid exceeds the critical density thereof. The method of carrying out chemical reactions generally comprises forming a first reverse micelle system including an aqueous fluid including reverse micelles in a water-insoluble fluid in the supercritical state. Then, a first reactant is introduced into the first reverse micelle system, and a chemical reaction is carried out with the first reactant to form a reaction product. In general, the first reactant can be incorporated into, and the product formed in, the reverse micelles. A second reactant can also be incorporated in the first reverse micelle system which is capable of reacting with the first reactant to form a product.

Techniques utilized in the simulated altitude testing of a 2D-CD vectoring and reversing nozzle

NASA Technical Reports Server (NTRS)

Block, H. Bruce; Bryant, Lively; Dicus, John H.; Moore, Allan S.; Burns, Maureen E.; Solomon, Robert F.; Sheer, Irving

1988-01-01

Simulated altitude testing of a two-dimensional, convergent-divergent, thrust vectoring and reversing exhaust nozzle was accomplished. An important objective of this test was to develop test hardware and techniques to properly operate a vectoring and reversing nozzle within the confines of an altitude test facility. This report presents detailed information on the major test support systems utilized, the operational performance of the systems and the problems encountered, and test equipment improvements recommended for future tests. The most challenging support systems included the multi-axis thrust measurement system, vectored and reverse exhaust gas collection systems, and infrared temperature measurement systems used to evaluate and monitor the nozzle. The feasibility of testing a vectoring and reversing nozzle of this type in an altitude chamber was successfully demonstrated. Supporting systems performed as required. During reverser operation, engine exhaust gases were successfully captured and turned downstream. However, a small amount of exhaust gas spilled out the collector ducts' inlet openings when the reverser was opened more than 60 percent. The spillage did not affect engine or nozzle performance. The three infrared systems which viewed the nozzle through the exhaust collection system worked remarkably well considering the harsh environment.

Space exploration initiative (SEI) logistics support lessons from the DoD

NASA Astrophysics Data System (ADS)

Cox, John R.; McCoy, Walbert G.; Jenkins, Terence

Proven and innovative logistics management approaches and techniques used for developing and supporting DoD and Strategic Defense Initiative Office (SDIO) systems are described on the basis of input from DoD to the SEI Synthesis Group; SDIO-developed logistics initiatives, innovative tools, and methodologies; and logistics planning support provided to the NASA/Johnson Planet Surface System Office. The approach is tailored for lunar/Martian surface operations, and provides guidelines for the development and management of a crucial element of the SEI logistics support program. A case study is presented which shows how incorporation of DoD's proven and innovative logistics management approach, tools, and techniques can substantially benefit early logistics planning for SEI, while also implementing many of DoD's recommendations for SEI.

Proteomic analysis of cerebrospinal fluid from children with central nervous system tumors identifies candidate proteins relating to tumor metastatic spread.

PubMed

Spreafico, Filippo; Bongarzone, Italia; Pizzamiglio, Sara; Magni, Ruben; Taverna, Elena; De Bortoli, Maida; Ciniselli, Chiara M; Barzanò, Elena; Biassoni, Veronica; Luchini, Alessandra; Liotta, Lance A; Zhou, Weidong; Signore, Michele; Verderio, Paolo; Massimino, Maura

2017-07-11

Central nervous system (CNS) tumors are the most common solid tumors in childhood. Since the sensitivity of combined cerebrospinal fluid (CSF) cytology and radiological neuroimaging in detecting meningeal metastases remains relatively low, we sought to characterize the CSF proteome of patients with CSF tumors to identify biomarkers predictive of metastatic spread. CSF samples from 27 children with brain tumors and 13 controls (extra-CNS non-Hodgkin lymphoma) were processed using core-shell hydrogel nanoparticles, and analyzed with reverse-phase liquid chromatography/electrospray tandem mass spectrometry (LC-MS/MS). Candidate proteins were identified with Fisher's exact test and/or a univariate logistic regression model. Reverse phase protein array (RPPA), Western blot (WB), and ELISA were used in the training set and in an independent set of CFS samples (60 cases, 14 controls) to validate our discovery findings. Among the 558 non-redundant proteins identified by LC-MS/MS, 147 were missing from the CSF database at http://www.biosino.org. Fourteen of the 26 final top-candidate proteins were chosen for validation with WB, RPPA and ELISA methods. Six proteins (type 1 collagen, insulin-like growth factor binding protein 4, procollagen C-endopeptidase enhancer 1, glial cell-line derived neurotrophic factor receptor α2, inter-alpha-trypsin inhibitor heavy chain 4, neural proliferation and differentiation control protein-1) revealed the ability to discriminate metastatic cases from controls. Combining a unique dataset of CSFs from pediatric CNS tumors with a novel enabling nanotechnology led us to identify CSF proteins potentially related to metastatic status.

Cradle-to-Grave Logistic Technologies for Exploration Missions

NASA Technical Reports Server (NTRS)

Broyan, James L.; Ewert, Michael K.; Shull, Sarah

2013-01-01

Human exploration missions under study are very limited by the launch mass capacity of exiting and planned vehicles. The logistical mass of crew items is typically considered separate from the vehicle structure, habitat outfitting, and life support systems. Consequently, crew item logistical mass is typically competing with vehicle systems for mass allocation. NASA is Advanced Exploration Systems (AES) Logistics Reduction and Repurposing (LRR) Project is developing four logistics technologies guided by a systems engineering cradle-to-grave approach to enable used crew items to augment vehicle systems. Specifically, AES LRR is investigating the direct reduction of clothing mass, the repurposing of logistical packaging, the processing of spent crew items to benefit radiation shielding and water recovery, and the conversion of trash to propulsion supply gases. The systematic implementation of these types of technologies will increase launch mass efficiency by enabling items to be used for secondary purposes and improve the habitability of the vehicle as the mission duration increases. This paper provides a description, benefits, and challenges of the four technologies under development and a status of progress at the mid ]point of the three year AES project.

Experience of low-dose aminophylline use to relieve minor adverse effects of dipyridamole in patients undergoing stress myocardial perfusion imaging.

PubMed

Lin, Li-Fan; Cheng, Cheng-Yi; Hou, Cheng-Han; Ku, Chih-Hung; Tseng, Neng-Chuan; Shen, Daniel H Y

2014-06-01

Intravenous administration of aminophylline is widely adopted to reverse dipyridamole-related adverse effects (AEs) during stress myocardial perfusion imaging (MPI). The study aimed to investigate the efficacy of lower-dose aminophylline to relieve minor AEs. 2,250 consecutive patients undergoing dipyridamole-stressed MPI were enrolled. Information concerning AE occurrence and dosages of aminophylline was collected to evaluate the efficacy of lower-dose aminophylline. A logistic regression was used to determine independent predictors of dipyridamole-related AE occurrence. No severe AE was noted. Overall mild AE incidence was 37.0% (833/2,250 patients). Initial low-dose (25 mg) aminophylline relieved symptoms in 98.8% of patients with mild AEs (823/833 patients). An extra 25 mg aminophylline sufficed to reverse all such AEs. Mean body mass index (BMI) differed significantly between patients with and without any AE [25.6 vs 25.1 (P = .009)]. There was no significant difference between two subgroups in mean age, male gender prevalence, body height and weight, dipyridamole dose/BMI, or prevalence of significant perfusion defect(s) on MPI. Multivariable logistic regression demonstrated BMI remained the independent predictor of dipyridamole-related AE occurrence (odds ratio 1.028, 95% confidence interval 1.007-1.049, P = .01). Low-dose (≦50 mg, and usually 25 mg) aminophylline seems sufficient to relieve mild dipyridamole-related AEs during stress MPI.

Crew/cargo and logistics module definition

NASA Technical Reports Server (NTRS)

1971-01-01

The logistics requirements for the space station cargo, the initial buildup, and the 90 day resupply are presented, along with the conceptual selection for the orbiter crew accommodations and the GSS logistics system. Various module configurations are outlined; structural/mechanical, environmental, temperature, voice communication, and data bus subsystems are also reviewed. Ground operations and module prelaunch and launch operations are discussed, as well as logistics system interfaces for space shuttles and stations.

Requirement analysis for the one-stop logistics management of fresh agricultural products

NASA Astrophysics Data System (ADS)

Li, Jun; Gao, Hongmei; Liu, Yuchuan

2017-08-01

Issues and concerns for food safety, agro-processing, and the environmental and ecological impact of food production have been attracted many research interests. Traceability and logistics management of fresh agricultural products is faced with the technological challenges including food product label and identification, activity/process characterization, information systems for the supply chain, i.e., from farm to table. Application of one-stop logistics service focuses on the whole supply chain process integration for fresh agricultural products is studied. A collaborative research project for the supply and logistics of fresh agricultural products in Tianjin was performed. Requirement analysis for the one-stop logistics management information system is studied. The model-driven business transformation, an approach uses formal models to explicitly define the structure and behavior of a business, is applied for the review and analysis process. Specific requirements for the logistic management solutions are proposed. Development of this research is crucial for the solution of one-stop logistics management information system integration platform for fresh agricultural products.

United States Air Force Computer-Aided Acquisition and Logistics Support (CALS). Logistics Support Analysis Current Environment. Volume 2

DOT National Transportation Integrated Search

1988-10-01

An analysis of the current environment within the Acquisition stage of the Weapon System Life Cycle Pertaining to the Logistics Support Analysis (LSA) process, the Logistics Support Analysis Record (LSAR), and other Logistics Support data was underta...

United States Air Force Computer-Aided Acquisition and Logistics Support (CALS). Logistics Support Analysis Current Environment. Volume 1

DOT National Transportation Integrated Search

1988-10-01

An analysis of the current environment within the Acquisition stage of the Weapon System Life Cycle Pertaining to the Logistics Support Analysis (LSA) process, the Logistics Support Analysis Record (LSAR), and other Logistics Support data was underta...

Classical reconstruction of interference patterns of position-wave-vector-entangled photon pairs by the time-reversal method

NASA Astrophysics Data System (ADS)

Ogawa, Kazuhisa; Kobayashi, Hirokazu; Tomita, Akihisa

2018-02-01

The quantum interference of entangled photons forms a key phenomenon underlying various quantum-optical technologies. It is known that the quantum interference patterns of entangled photon pairs can be reconstructed classically by the time-reversal method; however, the time-reversal method has been applied only to time-frequency-entangled two-photon systems in previous experiments. Here, we apply the time-reversal method to the position-wave-vector-entangled two-photon systems: the two-photon Young interferometer and the two-photon beam focusing system. We experimentally demonstrate that the time-reversed systems classically reconstruct the same interference patterns as the position-wave-vector-entangled two-photon systems.

The Automated Logistics Element Planning System (ALEPS)

NASA Technical Reports Server (NTRS)

Schwaab, Douglas G.

1992-01-01

ALEPS, which is being developed to provide the SSF program with a computer system to automate logistics resupply/return cargo load planning and verification, is presented. ALEPS will make it possible to simultaneously optimize both the resupply flight load plan and the return flight reload plan for any of the logistics carriers. In the verification mode ALEPS will support the carrier's flight readiness reviews and control proper execution of the approved plans. It will also support the SSF inventory management system by providing electronic block updates to the inventory database on the cargo arriving at or departing the station aboard a logistics carrier. A prototype drawer packing algorithm is described which is capable of generating solutions for 3D packing of cargo items into a logistics carrier storage accommodation. It is concluded that ALEPS will provide the capability to generate and modify optimized loading plans for the logistics elements fleet.

Magnetization reversal modes in fourfold Co nano-wire systems

NASA Astrophysics Data System (ADS)

Blachowicz, T.; Ehrmann, A.

2015-09-01

Magnetic nano-wire systems are, as well as other patterned magnetic structures, of special interest for novel applications, such as magnetic storage media. In these systems, the coupling between neighbouring magnetic units is most important for the magnetization reversal process of the complete system, leading to a variety of magnetization reversal mechanisms. This article examines the influence of the magnetic material on hysteresis loop shape, coercive field, and magnetization reversal modes. While iron nano-wire systems exhibit flat or one-step hysteresis loops, systems consisting of cobalt nano-wires show hysteresis loops with several longitudinal steps and transverse peaks, correlated to a rich spectrum of magnetization reversal mechanisms. We show that changing the material parameters while the system geometry stays identical can lead to completely different hysteresis loops and reversal modes. Thus, especially for finding magnetic nano-systems which can be used as quaternary or even higher-order storage devices, it is rational to test several materials for the planned systems. Apparently, new materials may lead to novel and unexpected behaviour - and can thus result in novel functionalities.

Potential applications of expert systems and operations research to space station logistics functions

NASA Technical Reports Server (NTRS)

Lippiatt, Thomas F.; Waterman, Donald

1985-01-01

The applicability of operations research, artificial intelligence, and expert systems to logistics problems for the space station were assessed. Promising application areas were identified for space station logistics. A needs assessment is presented and a specific course of action in each area is suggested.

[Optimization for MSW logistics of new Xicheng and new Dongcheng districts in Beijing based on the maximum capacity of transfer stations].

PubMed

Yuan, Jing; Li, Guo-xue; Zhang, Hong-yu; Luo, Yi-ming

2013-09-01

It is necessary to achieve the optimization for MSW logistics based on the new Xicheng (combining the former Xicheng and the former Xuanwu districts) and the new Dongcheng (combining the former Dongcheng and the former Chongwen districts) districts of Beijing. Based on the analysis of current MSW logistics system, transfer station's processing capacity and the terminal treatment facilities' conditions of the four former districts and other districts, a MSW logistics system was built by GIS methods considering transregional treatment. This article analyzes the MSW material balance of current and new logistics systems. Results show that the optimization scheme could reduce the MSW collection distance of the new Xicheng and the new Dongcheng by 9.3 x 10(5) km x a(-1), reduced by 10% compared with current logistics. Under the new logistics solution, considering transregional treatment, can reduce landfill treatment of untreated MSW about 28.3%. If the construction of three incineration plants finished based on the new logistics, the system's optimal ratio of incineration: biochemical treatment: landfill can reach 3.8 : 4.5 : 1.7 compared with 1 : 4.8 : 4.2, which is the ratio of current MSW logistics. The ratio of the amount of incineration: biochemical treatment: landfill approximately reach 4 : 3 : 3 which is the target for 2015. The research results are benefit in increasing MSW utilization and reduction rate of the new Dongcheng and Xicheng districts and nearby districts.

Analyzing and Comparing Biomass Feedstock Supply Systems in China: Corn Stover and Sweet Sorghum Case Studies

DOE PAGES

Ren, Lantian; Cafferty, Kara; Roni, Mohammad; ...

2015-06-11

This paper analyzes the rural Chinese biomass supply system and models supply chain operations according to U.S. concepts of logistical unit operations: harvest and collection, storage, transportation, preprocessing, and handling and queuing. In this paper, we quantify the logistics cost of corn stover and sweet sorghum in China under different scenarios. We analyze three scenarios of corn stover logistics from northeast China and three scenarios of sweet sorghum stalks logistics from Inner Mongolia in China. The case study estimates that the logistics cost of corn stover and sweet sorghum stalk to be $52.95/dry metric ton and $52.64/dry metric ton, respectively,more » for the current labor-based biomass logistics system. However, if the feedstock logistics operation is mechanized, the cost of corn stover and sweet sorghum stalk decreases to $36.01/dry metric ton and $35.76/dry metric ton, respectively. The study also includes a sensitivity analysis to identify the cost factors that cause logistics cost variation. Results of the sensitivity analysis show that labor price has the most influence on the logistics cost of corn stover and sweet sorghum stalk, with a variation of $6 to $12/dry metric ton.« less

Analyzing and Comparing Biomass Feedstock Supply Systems in China: Corn Stover and Sweet Sorghum Case Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Lantian; Cafferty, Kara; Roni, Mohammad

This paper analyzes the rural Chinese biomass supply system and models supply chain operations according to U.S. concepts of logistical unit operations: harvest and collection, storage, transportation, preprocessing, and handling and queuing. In this paper, we quantify the logistics cost of corn stover and sweet sorghum in China under different scenarios. We analyze three scenarios of corn stover logistics from northeast China and three scenarios of sweet sorghum stalks logistics from Inner Mongolia in China. The case study estimates that the logistics cost of corn stover and sweet sorghum stalk to be $52.95/dry metric ton and $52.64/dry metric ton, respectively,more » for the current labor-based biomass logistics system. However, if the feedstock logistics operation is mechanized, the cost of corn stover and sweet sorghum stalk decreases to $36.01/dry metric ton and $35.76/dry metric ton, respectively. The study also includes a sensitivity analysis to identify the cost factors that cause logistics cost variation. Results of the sensitivity analysis show that labor price has the most influence on the logistics cost of corn stover and sweet sorghum stalk, with a variation of $6 to $12/dry metric ton.« less

Space Station logistics policy - Risk management from the top down

NASA Technical Reports Server (NTRS)

Paules, Granville; Graham, James L., Jr.

1990-01-01

Considerations are presented in the area of risk management specifically relating to logistics and system supportability. These considerations form a basis for confident application of concurrent engineering principles to a development program, aiming at simultaneous consideration of support and logistics requirements within the engineering process as the system concept and designs develop. It is shown that, by applying such a process, the chances of minimizing program logistics and supportability risk in the long term can be improved. The problem of analyzing and minimizing integrated logistics risk for the Space Station Freedom Program is discussed.

14 CFR 25.933 - Reversing systems.

Code of Federal Regulations, 2014 CFR

2014-01-01

... reversal in flight the engine will produce no more than flight idle thrust. In addition, it must be shown... kind of failure is extremely remote. (3) Each system must have means to prevent the engine from... alone, under the most critical reversing condition expected in operation. (b) For propeller reversing...

14 CFR 25.933 - Reversing systems.

Code of Federal Regulations, 2012 CFR

2012-01-01

... reversal in flight the engine will produce no more than flight idle thrust. In addition, it must be shown... kind of failure is extremely remote. (3) Each system must have means to prevent the engine from... alone, under the most critical reversing condition expected in operation. (b) For propeller reversing...

14 CFR 25.933 - Reversing systems.

Code of Federal Regulations, 2011 CFR

2011-01-01

... reversal in flight the engine will produce no more than flight idle thrust. In addition, it must be shown... kind of failure is extremely remote. (3) Each system must have means to prevent the engine from... alone, under the most critical reversing condition expected in operation. (b) For propeller reversing...

Preliminary analysis of an integrated logistics system for OSSA payloads. Volume 2: OSSA integrated logistics support strategy

NASA Technical Reports Server (NTRS)

Palguta, T.; Bradley, W.; Stockton, T.

1988-01-01

The purpose is to outline an Office of Space Science and Applications (OSSA) integrated logistics support strategy that will ensure effective logistics support of OSSA payloads at an affordable life-cycle cost. Program objectives, organizational relationships, and implementation of the logistics strategy are discussed.

Theoretical test of Jarzynski's equality for reversible volume-switching processes of an ideal gas system.

PubMed

Sung, Jaeyoung

2007-07-01

We present an exact theoretical test of Jarzynski's equality (JE) for reversible volume-switching processes of an ideal gas system. The exact analysis shows that the prediction of JE for the free energy difference is the same as the work done on the gas system during the reversible process that is dependent on the shape of path of the reversible volume-switching process.

Integrated tracking of components by engineering and logistics utilizing logistics asset tracking system

NASA Technical Reports Server (NTRS)

Renfroe, Michael B.; Mcdonald, Edward J.; Bradshaw, Kimberly

1988-01-01

The Logistics Asset Tracking System (LATS) devised by NASA contains data on Space Shuttle LRUs that are daily updated to reflect such LRU status changes as repair due to failure or modification due to changing engineering requirements. The implementation of LATS has substantially increased personnel responsiveness, preventing costly delays in Space Shuttle processing and obviating hardware cannibalization. An evaluation is presented of LATS achievements in the direction of an integrated logistical support posture.

Conduction at the onset of chaos

NASA Astrophysics Data System (ADS)

Baldovin, Fulvio

2017-02-01

After a general discussion of the thermodynamics of conductive processes, we introduce specific observables enabling the connection of the diffusive transport properties with the microscopic dynamics. We solve the case of Brownian particles, both analytically and numerically, and address then whether aspects of the classic Onsager's picture generalize to the non-local non-reversible dynamics described by logistic map iterates. While in the chaotic case numerical evidence of a monotonic relaxation is found, at the onset of chaos complex relaxation patterns emerge.

78 FR 14278 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

.... SUMMARY: The Defense Logistics Agency proposes to alter a system of records in its inventory of record.../Privacy Act Office, Headquarters, Defense Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite... Logistics; Pub.L. 95-521, Ethics in Government Act; and DoD Directive 7050.5, Coordination of Remedies for...

32 CFR 323.5 - Access to systems of records information.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) PRIVACY PROGRAM DEFENSE LOGISTICS AGENCY PRIVACY PROGRAM § 323.5 Access to systems of records... Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060-6221. Any written... General Counsel, Defense Logistics Agency, ATTN: DGA, Suite 1644, 8725 John J. Kingman Road, Fort Belvoir...

32 CFR 323.5 - Access to systems of records information.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) PRIVACY PROGRAM DEFENSE LOGISTICS AGENCY PRIVACY PROGRAM § 323.5 Access to systems of records... Logistics Agency, ATTN: DGA, 8725 John J. Kingman Road, Suite 1644, Fort Belvoir, VA 22060-6221. Any written... General Counsel, Defense Logistics Agency, ATTN: DGA, Suite 1644, 8725 John J. Kingman Road, Fort Belvoir...

32 CFR Appendix H to Part 323 - DLA Exemption Rules

Code of Federal Regulations, 2011 CFR

2011-07-01

... PROGRAM DEFENSE LOGISTICS AGENCY PRIVACY PROGRAM Pt. 323, App. H Appendix H to Part 323—DLA Exemption... systems of records maintained by the Defense Logistics Agency will be exempt from the requirements of 5 U... Defense Logistics Agency claims the same exemptions for the records from those “other” systems that are...

A Model for Logistics Systems Engineering Management Education in Europe.

ERIC Educational Resources Information Center

Naim, M.; Lalwani, C.; Fortuin, L.; Schmidt, T.; Taylor, J.; Aronsson, H.

2000-01-01

Presents the need for a systems and process perspective of logistics, and develops a template for a logistics education course. The template addresses functional, process, and supply chain needs and was developed by a number of university partners with core skills in different traditional disciplines. (Contains 31 references.) (Author/WRM)

Army Logistics Systems: Opportunities to Improve the Accuracy of the Army’s Major Equipment Item System

DTIC Science & Technology

1998-01-01

consolidated financial statements of the federal government, we are reviewing the accuracy of data in the military services’ financial/logistical systems that are used to provide property, plant, and equipment information to the financial statements. The Army uses the Continuing Balance System-Expanded (CBSX) as its central logistics system for reporting the types, quantities, and location of equipment; monitoring the equipment readiness of its warfighting units; and filling equipment shortages in those units scheduled for mobilization. In addition,

Weapon System Management to Directorate of Logistics Management Systems Requirements (XRB) DCS/Plans and Programs Air Force Logistics Command Wright-Patterson AFB, Ohio 45433.

DTIC Science & Technology

1982-05-14

Attachment 2 contains the reports and lessons learned which resulted from the Level II Weapon System Management activities. Attachment 3 contains the reports...and lessons learned which resulted from the Level III Weapon System Management activities. _____ r. Air Force Logistics Command Attn: Col. McConnell 2...May 14, 1982 Attachment 4 contains the plans and lessons learned which resulted from the RCC Evaluation activities. I am pleased to deliver these

LOGDIS (Logistics Data Integration System): Productivity evaluation report. [Logistics Data Integration System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schultz, E.E.; Abrahams, S.; Banks, W.W. Jr.

1987-08-26

This report presents the results of an end-user productivity study associated with the implementation of LOGDIS (Logistics Data Integration System), a prototype LLNL Gateway system. Its purpose is to provide AFLC decision-makers with data pertaining to estimates of any productivity changes that can be expected or realized by the use of advanced technology and applications software. The effort described in this report focuses on objective functional user productivity and performance changes which can be attributed directly and objectively to LOGDIS.

Evaluation of trade-offs in costs and environmental impacts for returnable packaging implementation

NASA Astrophysics Data System (ADS)

Jarupan, Lerpong; Kamarthi, Sagar V.; Gupta, Surendra M.

2004-02-01

The main thrust of returnable packaging these days is to provide logistical services through transportation and distribution of products and be environmentally friendly. Returnable packaging and reverse logistics concepts have converged to mitigate the adverse effect of packaging materials entering the solid waste stream. Returnable packaging must be designed by considering the trade-offs between costs and environmental impact to satisfy manufacturers and environmentalists alike. The cost of returnable packaging entails such items as materials, manufacturing, collection, storage and disposal. Environmental impacts are explicitly linked with solid waste, air pollution, and water pollution. This paper presents a multi-criteria evaluation technique to assist decision-makers for evaluating the trade-offs in costs and environmental impact during the returnable packaging design process. The proposed evaluation technique involves a combination of multiple objective integer linear programming and analytic hierarchy process. A numerical example is used to illustrate the methodology.

ETV REPORT: EVALUATION OF HYDROMETRICS, INC., HIGH EFFICIENCY REVERSE OSMOSIS (HERO™) INDUSTRIAL WASTEWATER TREATMENT SYSTEM

EPA Science Inventory

Hydrometrics, founded in 1979 and located in Helena, MT, manufactures a commercial-ready High Efficiency Reverse Osmosis (HERO™) industrial wastewater treatment system. The system uses a three-stage reverse osmosis process to remove and concentrate metals for recovery while prod...

ADP SYSTEMS ANALYSIS - COMMITTED VS. AVAILABLE MILITARY TRANSPORTATION (LMI T1).

DTIC Science & Technology

LOGISTICS , * MANAGEMENT ENGINEERING), (*DATA PROCESSING, LOGISTICS), INFORMATION RETRIEVAL, SYSTEMS ENGINEERING, MILITARY TRANSPORTATION, CARGO VEHICLES, SCHEDULING, COMPUTER PROGRAMMING, MANAGEMENT PLANNING AND CONTROL

The Use of Logistics n the Quality Parameters Control System of Material Flow

ERIC Educational Resources Information Center

Karpova, Natalia P.; Toymentseva, Irina A.; Shvetsova, Elena V.; Chichkina, Vera D.; Chubarkova, Elena V.

2016-01-01

The relevance of the research problem is conditioned on the need to justify the use of the logistics methodologies in the quality parameters control process of material flows. The goal of the article is to develop theoretical principles and practical recommendations for logistical system control in material flows quality parameters. A leading…

Focused Logistics: Putting Agility in Agile Logistics

DTIC Science & Technology

2011-05-19

list, ahead of companies like American Express, DuPont and Coca Cola ; Supports nearly 1,900 weapon systems; DLA manages eight supply chains and...35 7) Force Health Protection...Distribution, Information Fusion, Joint Theater Logistics Command and Control, Multinational Logistics, Joint Health Services Support, and Agile

Logistics Modeling for Lunar Exploration Systems

NASA Technical Reports Server (NTRS)

Andraschko, Mark R.; Merrill, R. Gabe; Earle, Kevin D.

2008-01-01

The extensive logistics required to support extended crewed operations in space make effective modeling of logistics requirements and deployment critical to predicting the behavior of human lunar exploration systems. This paper discusses the software that has been developed as part of the Campaign Manifest Analysis Tool in support of strategic analysis activities under the Constellation Architecture Team - Lunar. The described logistics module enables definition of logistics requirements across multiple surface locations and allows for the transfer of logistics between those locations. A key feature of the module is the loading algorithm that is used to efficiently load logistics by type into carriers and then onto landers. Attention is given to the capabilities and limitations of this loading algorithm, particularly with regard to surface transfers. These capabilities are described within the context of the object-oriented software implementation, with details provided on the applicability of using this approach to model other human exploration scenarios. Some challenges of incorporating probabilistics into this type of logistics analysis model are discussed at a high level.

The imperative for stronger vaccine supply and logistics systems.

PubMed

Zaffran, Michel; Vandelaer, Jos; Kristensen, Debra; Melgaard, Bjørn; Yadav, Prashant; Antwi-Agyei, K O; Lasher, Heidi

2013-04-18

With the introduction of new vaccines, developing countries are facing serious challenges in their vaccine supply and logistics systems. Storage capacity bottlenecks occur at national, regional, and district levels and system inefficiencies threaten vaccine access, availability, and quality. As countries adopt newer and more expensive vaccines and attempt to reach people at different ages and in new settings, their logistics systems must be strengthened and optimized. As a first step, national governments, donors, and international agencies have crafted a global vision for 2020 vaccine supply and logistics systems with detailed plans of action to achieve five priority objectives. Vaccine products and packaging are designed to meet the needs of developing countries. Immunization supply systems support efficient and effective vaccine delivery. The environmental impact of energy, materials, and processes used in immunization systems is minimized. Immunization information systems enable better and more timely decision-making. Competent and motivated personnel are empowered to handle immunization supply chain issues. Over the next decade, vaccine supply and logistics systems in nearly all developing countries will require significant investments of time and resources from global and national partners, donors, and governments. These investments are critical if we are to reach more people with current and newer vaccines. Copyright © 2012 Elsevier Ltd. All rights reserved.

75 FR 47797 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-09

... DEPARTMENT OF DEFENSE Defense Logistics Agency [Docket ID: DOD-2010-OS-0110] Privacy Act of 1974; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete a system of records. [[Page 47798

76 FR 53420 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-26

...; Systems of Records AGENCY: Defense Logistics Agency, Department of Defense (DoD). ACTION: Notice to Delete a System of Records. SUMMARY: The Defense Logistics Agency proposes to delete a system of records... Docket Management System Office, 4800 Mark Center Drive, Suite 02G09, Alexandria, VA 22350-3100...

75 FR 6000 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-05

...; Systems of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete a system of records. SUMMARY: The Defense Logistics Agency proposes to delete a system of records notice in its existing... . Follow the instructions for submitting comments. * Mail: Federal Docket Management System Office, 1160...

Integrated Logistics Support Plan (ILSP) for the Ports and Waterways Safety System (PAWSS) Project - A Level I Major Acquisition

DOT National Transportation Integrated Search

1997-09-30

This Integrated Logistics Support Plan (ILSP) serves as the master logistics planning document that describes necessary logistic activities, assigns responsibility for those activities, and establishes a schedule for completion. It is one of the init...

Evolution dynamics modeling and simulation of logistics enterprise's core competence based on service innovation

NASA Astrophysics Data System (ADS)

Yang, Bo; Tong, Yuting

2017-04-01

With the rapid development of economy, the development of logistics enterprises in China is also facing a huge challenge, especially the logistics enterprises generally lack of core competitiveness, and service innovation awareness is not strong. Scholars in the process of studying the core competitiveness of logistics enterprises are mainly from the perspective of static stability, not from the perspective of dynamic evolution to explore. So the author analyzes the influencing factors and the evolution process of the core competence of logistics enterprises, using the method of system dynamics to study the cause and effect of the evolution of the core competence of logistics enterprises, construct a system dynamics model of evolution of core competence logistics enterprises, which can be simulated by vensim PLE. The analysis for the effectiveness and sensitivity of simulation model indicates the model can be used as the fitting of the evolution process of the core competence of logistics enterprises and reveal the process and mechanism of the evolution of the core competence of logistics enterprises, and provide management strategies for improving the core competence of logistics enterprises. The construction and operation of computer simulation model offers a kind of effective method for studying the evolution of logistics enterprise core competence.

14 CFR 23.934 - Turbojet and turbofan engine thrust reverser systems tests.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Turbojet and turbofan engine thrust... CATEGORY AIRPLANES Powerplant General § 23.934 Turbojet and turbofan engine thrust reverser systems tests. Thrust reverser systems of turbojet or turbofan engines must meet the requirements of § 33.97 of this...

Operating and Support Costing Guide: Army Weapon Systems

DTIC Science & Technology

1974-12-23

First US Army 1 Commandant, US Army Logistics Management Center (Director Administration and Services) 2 Commander, US Army Management Systems Support...Army Logistics Management Center (Director, Administration and Services) Commander, US Army Management Systems Support Agency (DACS-AME) Commander

Addressing reverse osmosis fouling within water reclamation--a side-by-side comparison of low-pressure membrane pretreatments.

PubMed

Kent, Fraser C; Farahbakhsh, Khosrow

2011-06-01

A tertiary membrane filtration (TMF) pilot operating on secondary effluent and a membrane bioreactor (MBR) were setup in a side-by-side study as pretreatments for two identical reverse osmosis pilot systems. The water quality of the permeate from both low-pressure membrane pretreatment systems and the fouling rate of the reverse osmosis systems were compared to assess the capabilities of the two low-pressure membrane pretreatments to prevent organic fouling of the reverse osmosis systems. Both pretreatment pilots were setup using typical operating conditions (i.e., solids retention time and mixed-liquor suspended solids). A consistent difference in water quality and reverse osmosis performance was demonstrated during the 12-month study. The MBR permeate consistently had significantly lower total organic carbon (TOC) and chemical oxygen demand concentrations, but higher color and specific UV absorbance compared with the permeate from the TMF pretreatment. The pretreatment with the MBR gave an average reverse osmosis fouling rate over the entire study (0.27 Lmh/bar.month) that was less than half of the value found for the reverse osmosis with TMF pretreatment (0.60 Lmh/bar.month). A correlation of reverse osmosis feed TOC concentration with average reverse osmosis fouling rate also was established, independent of the pretreatment method used. Results from a cleaning analysis, energy dispersive spectroscopy, and fourier transformed infrared reflectometry confirmed that the foulants were primarily organic in nature. It is concluded that, for this type of application and setup, MBR systems present an advantage over tertiary membrane polishing of secondary effluent for reverse osmosis pretreatment.

Late pregnancy reversal from excessive gestational weight gain lowers risk of childhood overweight--a cohort study.

PubMed

von Kries, Rüdiger; Chmitorz, Andrea; Rasmussen, Kathleen M; Bayer, Otmar; Ensenauer, Regina

2013-06-01

Whether reversal to adequate gestational weight gain (GWG) in the third trimester reverses the risk for childhood overweight associated with excessive GWG is assessed. In a retrospective cohort study in 6,665 mother-child pairs, pre-pregnancy weight and the temporal course of GWG were collected from medical records. Overweight as defined by International Obesity Task Force was assessed at a mean age of 5.8 years. Main exposures were exceeding week-specific cut-off values for GWG in the third trimester or any previous trimester. Logistic regression models, adjusted for possible confounding factors, were used to predict the risk of childhood overweight from excessive GWG in the third trimester with stratification by excessive GWG in previous trimesters. In the final model, women who avoided excessive GWG in the third trimester had children with a 31% (odds ratio [OR]: 0.69, 95% confidence interval [CI]: 0.59, 0.82) lower probability being overweight. A similar association was observed for reversing from excessive GWG in the first or second trimester to normal GWG in the third trimester: 27% (OR: 0.73, 95% CI: 0.53, 0.99). Avoidance of excessive GWG in the third trimester is associated with lower risk of childhood overweight even in case of excessive GWG in the first or second trimester. Copyright © 2013 The Obesity Society.

Preliminary analysis of an integrated logistics system for OSSA payloads

NASA Technical Reports Server (NTRS)

Palguta, T.; Bradley, W.; Stockton, T.

1988-01-01

The results of studies of the Office of Space Science and Applications' (OSSA) need for an integrated logistics system to support OSSA payloads, whether attached to the Space Station or free-flying are detailed. An executive summary, the integrated logistics support strategy, preparation of planning documents and a supportability analysis of the 1.8 meter centrifuge are discussed.

Logistics Force Planner Assistant (Log Planner)

DTIC Science & Technology

1989-09-01

elements. The system is implemented on a MS-DOS based microcomputer, using the "Knowledge Pro’ software tool., 20 DISTRIBUTION/AVAILABILITY OF... service support structure. 3. A microcomputer-based knowledge system was developed and successfully demonstrated. Four modules of information are...combat service support (CSS) units planning process to Army Staff logistics planners. Personnel newly assigned to logistics planning need an

77 FR 59596 - Procurement List; Proposed Additions

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-28

... within the authority of Naval Supply Systems Command (NAVSUP) Fleet Logistics Center in Jacksonville, FL, as aggregated by the Naval Supply Systems Command (NAVSUP) Fleet Logistics Center, Jacksonville, FL...

Survey of how different groups of veterinarians manage the use of neuromuscular blocking agents in anesthetized dogs.

PubMed

Martin-Flores, Manuel; Sakai, Daniel M; Campoy, Luis; Gleed, Robin D

2018-03-23

To analyze practice habits associated with the use, reversal and monitoring of nondepolarizing neuromuscular blocking agents (NMBAs) in dogs by different groups of veterinarians. Online anonymous survey to veterinarians. Data from 390 answered surveys. A questionnaire was sent to e-mail list servers of the American College of Veterinary Anesthesia and Analgesia (ACVAA-list), Sociedad Española de Anestesia y Analgesia Veterinaria (SEEAV-list), Colégio Brasileiro de Anestesiologia Veterinária (Brazilian College of Veterinary Anesthesiology; CBAV-list) and American College of Veterinary Ophthalmologists (ACVO-list) to elicit information regarding use of NMBAs and reversal agents, monitoring techniques, criteria for redosing, reversing and assessing adequacy of recovery of neuromuscular function. Binomial logistic regression was used to test for association between responses and group of veterinarians in selected questions. Veterinarians of the ACVO-list use NMBAs on a higher fraction of their caseload than other groups (all p < 0.0001). Subjective assessment (observation) of spontaneous movement, including spontaneous breathing, is the most common method for assessing neuromuscular function (43% of pooled responses); 18% of participants always reverse NMBAs, whereas 16% never reverse them. Restoration of neuromuscular function is assessed subjectively by 35% of respondents. Residual neuromuscular block is the most common concern regarding the use of NMBAs for all groups of veterinarians. Side effects of reversal agents (anticholinesterases) were of least concern for all groups. While most veterinarians are concerned about residual neuromuscular block, relatively few steps are implemented to reduce the risks of this complication, such as routine use of quantitative neuromuscular monitoring or routine reversal of NMBAs. These results suggest a limitation in transferring information among groups of veterinarians, or in implementing techniques suggested by scientific research. Copyright © 2018 Association of Veterinary Anaesthetists and American College of Veterinary Anesthesia and Analgesia. Published by Elsevier Ltd. All rights reserved.

Study on conditional probability of surface rupture: effect of fault dip and width of seismogenic layer

NASA Astrophysics Data System (ADS)

Inoue, N.

2017-12-01

The conditional probability of surface ruptures is affected by various factors, such as shallow material properties, process of earthquakes, ground motions and so on. Toda (2013) pointed out difference of the conditional probability of strike and reverse fault by considering the fault dip and width of seismogenic layer. This study evaluated conditional probability of surface rupture based on following procedures. Fault geometry was determined from the randomly generated magnitude based on The Headquarters for Earthquake Research Promotion (2017) method. If the defined fault plane was not saturated in the assumed width of the seismogenic layer, the fault plane depth was randomly provided within the seismogenic layer. The logistic analysis was performed to two data sets: surface displacement calculated by dislocation methods (Wang et al., 2003) from the defined source fault, the depth of top of the defined source fault. The estimated conditional probability from surface displacement indicated higher probability of reverse faults than that of strike faults, and this result coincides to previous similar studies (i.e. Kagawa et al., 2004; Kataoka and Kusakabe, 2005). On the contrary, the probability estimated from the depth of the source fault indicated higher probability of thrust faults than that of strike and reverse faults, and this trend is similar to the conditional probability of PFDHA results (Youngs et al., 2003; Moss and Ross, 2011). The probability of combined simulated results of thrust and reverse also shows low probability. The worldwide compiled reverse fault data include low fault dip angle earthquake. On the other hand, in the case of Japanese reverse fault, there is possibility that the conditional probability of reverse faults with less low dip angle earthquake shows low probability and indicates similar probability of strike fault (i.e. Takao et al., 2013). In the future, numerical simulation by considering failure condition of surface by the source fault would be performed in order to examine the amount of the displacement and conditional probability quantitatively.

78 FR 14273 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete a System of Records. SUMMARY: The Defense Logistics Agency is deleting a system of records notice in its existing inventory of... Management System Office, 4800 Mark Center Drive, East Tower, 2nd Floor, Suite 02G09, Alexandria, VA 22350...

77 FR 35945 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-15

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice To Amend a system of records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records in its inventory of record.... Mail: Federal Docket Management System Office, 4800 Mark Center Drive, East Tower, 2nd Floor, Suite...

78 FR 17385 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-21

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to amend a System of Records. SUMMARY: The Defense Logistics Agency is amending a system of records notice in its existing inventory of... Management System Office, 4800 Mark Center Drive, East Tower, 2nd Floor, Suite 02G09, Alexandria, VA 22350...

78 FR 6078 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-29

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete a System of Records. SUMMARY: The Defense Logistics Agency is deleting a system of records notice in its existing inventory of... Management System Office, 4800 Mark Center Drive, East Tower, 2nd Floor, Suite 02G09, Alexandria, VA 22350...

77 FR 21755 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-11

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records in its inventory of record.... Mail: Federal Docket Management System Office, 4800 Mark Center Drive, East Tower, 2nd Floor, Suite...

78 FR 14279 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete two Systems of Records. SUMMARY: The Defense Logistics Agency is deleting two systems of records notices in its existing inventory... Docket Management System Office, 4800 Mark Center Drive, East Tower, 2nd Floor, Suite 02G09, Alexandria...

77 FR 26260 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-03

.... * Mail: Federal Docket Management System Office, 4800 Mark Center Drive, East Tower, 2nd Floor, Suite...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to alter a system of records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records in its inventory of record...

Improvement of logistics education from the point of view environmental management

NASA Astrophysics Data System (ADS)

Bányai, Á.

2009-04-01

The paper briefly presents the influence of environmental management on the improvement of the logistics education and research structure of the Department of Materials Handling and Logistics at the University of Miskolc, Hungary. The logistics, as an integrated science offers a very good possibility to demonstrate the effect of new innovative knowledge on the migration of the priorities of education and research of sciences. The importance of logistics in the field of recycling (or in wider sense in the field of environmental management) can be justified by the high proportion of logistic costs (as investment and operation costs) and these costs show that optimum logistic solutions are able to decrease the financial outcomes and lead to the establishment of a profitable system. Technological change constantly creates new demands on both education and research. The most important objective of the department is to create a unique logistics education in the country. For this reason the department offered up-to-date integrated knowledge at all level: undergraduate, master degree and PhD education. The integration of logistics means traditionally the joint use of technology of material handling, method of material flow, technology method of traffic, information technology, management sciences, production technology, marketing, market research, technology of services, mathematics and optimization, communication technology, system engineering, electronics and automation, mechatronics [1, 3]. The education and research portfolio of the department followed this tradition till 1993. The new lectures in the field of sustainability (logistics of recycling, logistics of quality management and recycling, closed loop economy, EU logistics or global logistics) became more and more important in the logistics education. The results of fast developments in closed loop economy, recycling, waste management, environmental protection are more and more used in the industry and this effected a revolutionary change in the education and research structure of logistics [2]. The European Community policy in the environment sectors aims at a high level of protection. Four principles were defined: the precautionary principle, the principle that preventive action should be taken, that environmental damages should as a priority be rectified at source and that the polluter should pay. All of these four principles have a very strong logistics background, especially in the field of import/export operations, traffic/transportation, inventory control, materials handling, fleet operations, customer service, supply chain management, distribution, strategic planning, warehousing, information systems of logistics, purchasing. These facts effect the development of different topics of logistics in each field of the education of the department: collection logistics of used products (especially WEEE), optimization of collection systems, design and control of disassembly systems, distribution of fractions of disassembled used products, design and control of recycling parks, possibilities of virtual networks in the field of recycling logistics, integration of logistics, recycling and total quality management, identification systems and recycling, etc. Within the framework of different supports our department has the opportunity to take part in European networks and research projects in the field of sustainability, environmental protection, recycling and closed loop economy. One of the biggest networks was developed within the framework of a Brite-Euram project entitled ‘Closing the loop from the product design to the end of life technologies'. The importance of logistics is certified by the fact, that this network defined the milestones of the improvement of an economically beneficial closed loop economy as quality aspects, communication and marketing, logistics and qualification. Within the frame of this project the logistics focused on the improvement of technologies (disassembly, reuse, refurbishment, remanufacturing and recycling), collection systems, and development of the concept for collection logistics and pre-disassembly, market survey in waste management. The Regional Knowledge Centre of Mechatronics and Logistics Systems was established in 2005. The overall objective of Knowledge Centre is to develop knowledge-intensive mechatronics and logistics systems in the leading edge of the world and to integrate the results in the economy and society through utilising the knowledge. The realisation of the objective requires the establishment and operation of a networking system of relations between those involved in sciences, the economy and society. The knowledge centre is a "knowledge integration tool" of the university in the field of mechanical engineering, and plays an important part in the intensification of the integration of the philosophy of sustainability into the related sciences. The program of the knowledge centre is focused on three well definable strategic fields, which are the vertical elements of the model. These are the R&D programs: world of products, materials and technologies, and integrated systems. The programs cover the implementation of seven, internationally competitive, application-oriented part tasks. These seven part tasks and the sustainability are closely related. The realisation of the part tasks through networking offers considerable results and economical-ecological benefits, forth for the participants and the region. The activities include basic and applied research, experimental development, technology transfer, as well as education and training and preparing the new scientific generation. The horizontal elements of the model are given by the utilisation of knowledge that can be interpreted in different dimensions: technical/engineering, legal, sustainability, economic, and social. The program relies on the continuation of existing relations in networks, and its regional nature is embodied in the cooperation of the higher education institutes and companies of the three counties. This publication was supported by the National Office for Research and Technology within the frame of Pázmány Péter programme. Any opinions, findings and conclusions or recommendations expressed in this material are those of the author and do not necessarily reflect the views of the National Office for Research and Technology. Literature: [1] J. Cselényi, Gy. Fischer, J. Murvai, B. Mang: Typical models of the recycling logistics of worn out product. Proceedings of XIV. International Conference on Material Handling and Warehousing in Belgrade, 1996. pp. 138-143. [2] R. Knoth, M. Hoffmann, B. Kopacek, P. Kopacek: A logistic concept to improve the re-usability of electric and electronic equipment, Electronics and the Environment, 2001. Proceedings of the 2001 IEEE International Symposium. 2001. pp. 115 - 118. [3] L. Cser, B. Mang: Cleaner Technologies and Recycling in Hungary. Proceedings of Int. Workshop on Environmental Conscious Manufacturing in Hertogenbosch, The Netherlands, 1997. pp. 48-56.

Assessment of the Technical Training Received by Source Selection Participants in Air Force Systems Command.

DTIC Science & Technology

1986-09-01

60 48.4 Systems 200/400 15 12.1 Contract Administration (PPM 152) 13 10.5 Logistics Management (Log 224) 2 1.6 Government Contract Law (PPM 302) 20...detail. 1. Systems 200/400 2. Contract Administration (PPM 152) 3. Logistics Management (LOG 224) 4. Government Contract Law (PPM 302) 5. Technical...152 Contract Administration o Log 224 Logistics Management o PPM 302 Government Contract Law o QMT 345 Quantitative Technical, Cost, and Price Analysis

Recovering time-varying networks of dependencies in social and biological studies.

PubMed

Ahmed, Amr; Xing, Eric P

2009-07-21

A plausible representation of the relational information among entities in dynamic systems such as a living cell or a social community is a stochastic network that is topologically rewiring and semantically evolving over time. Although there is a rich literature in modeling static or temporally invariant networks, little has been done toward recovering the network structure when the networks are not observable in a dynamic context. In this article, we present a machine learning method called TESLA, which builds on a temporally smoothed l(1)-regularized logistic regression formalism that can be cast as a standard convex-optimization problem and solved efficiently by using generic solvers scalable to large networks. We report promising results on recovering simulated time-varying networks and on reverse engineering the latent sequence of temporally rewiring political and academic social networks from longitudinal data, and the evolving gene networks over >4,000 genes during the life cycle of Drosophila melanogaster from a microarray time course at a resolution limited only by sample frequency.

An economic production model for deteriorating items and time dependent demand with rework and multiple production setups

NASA Astrophysics Data System (ADS)

Uthayakumar, R.; Tharani, S.

2017-12-01

Recently, much emphasis has given to study the control and maintenance of production inventories of the deteriorating items. Rework is one of the main issues in reverse logistic and green supply chain, since it can reduce production cost and the environmental problem. Many researchers have focused on developing rework model, but few of them have developed model for deteriorating items. Due to this fact, we take up productivity and rework with deterioration as the major concern in this paper. In this paper, a production-inventory model with deteriorative items in which one cycle has n production setups and one rework setup (n, 1) policy is considered for deteriorating items with stock-dependent demand in case 1 and exponential demand in case 2. An effective iterative solution procedure is developed to achieve optimal time, so that the total cost of the system is minimized. Numerical and sensitivity analyses are discussed to examine the outcome of the proposed solution procedure presented in this research.

Using GIS to generate spatially balanced random survey designs for natural resource applications.

PubMed

Theobald, David M; Stevens, Don L; White, Denis; Urquhart, N Scott; Olsen, Anthony R; Norman, John B

2007-07-01

Sampling of a population is frequently required to understand trends and patterns in natural resource management because financial and time constraints preclude a complete census. A rigorous probability-based survey design specifies where to sample so that inferences from the sample apply to the entire population. Probability survey designs should be used in natural resource and environmental management situations because they provide the mathematical foundation for statistical inference. Development of long-term monitoring designs demand survey designs that achieve statistical rigor and are efficient but remain flexible to inevitable logistical or practical constraints during field data collection. Here we describe an approach to probability-based survey design, called the Reversed Randomized Quadrant-Recursive Raster, based on the concept of spatially balanced sampling and implemented in a geographic information system. This provides environmental managers a practical tool to generate flexible and efficient survey designs for natural resource applications. Factors commonly used to modify sampling intensity, such as categories, gradients, or accessibility, can be readily incorporated into the spatially balanced sample design.

Monitoring tetracycline through a solid-state nanopore sensor

NASA Astrophysics Data System (ADS)

Zhang, Yuechuan; Chen, Yanling; Fu, Yongqi; Ying, Cuifeng; Feng, Yanxiao; Huang, Qimeng; Wang, Chao; Pei, De-Sheng; Wang, Deqiang

2016-06-01

Antibiotics as emerging environmental contaminants, are widely used in both human and veterinary medicines. A solid-state nanopore sensing method is reported in this article to detect Tetracycline, which is based on Tet-off and Tet-on systems. rtTA (reverse tetracycline-controlled trans-activator) and TRE (Tetracycline Responsive Element) could bind each other under the action of Tetracycline to form one complex. When the complex passes through nanopores with 8 ~ 9 nanometers in diameter, we could detect the concentrations of Tet from 2 ng/mL to 2000 ng/mL. According to the Logistic model, we could define three growth zones of Tetracycline for rtTA and TRE. The slow growth zone is 0-39.5 ng/mL. The rapid growth zone is 39.5-529.7 ng/mL. The saturated zone is > 529.7 ng/mL. Compared to the previous methods, the nanopore sensor could detect and quantify these different kinds of molecule at the single-molecule level.

Static Performance of a Wing-Mounted Thrust Reverser Concept

NASA Technical Reports Server (NTRS)

Asbury, Scott C.; Yetter, Jeffrey A.

1998-01-01

An experimental investigation was conducted in the Jet-Exit Test Facility at NASA Langley Research Center to study the static aerodynamic performance of a wing-mounted thrust reverser concept applicable to subsonic transport aircraft. This innovative engine powered thrust reverser system is designed to utilize wing-mounted flow deflectors to produce aircraft deceleration forces. Testing was conducted using a 7.9%-scale exhaust system model with a fan-to-core bypass ratio of approximately 9.0, a supercritical left-hand wing section attached via a pylon, and wing-mounted flow deflectors attached to the wing section. Geometric variations of key design parameters investigated for the wing-mounted thrust reverser concept included flow deflector angle and chord length, deflector edge fences, and the yaw mount angle of the deflector system (normal to the engine centerline or parallel to the wing trailing edge). All tests were conducted with no external flow and high pressure air was used to simulate core and fan engine exhaust flows. Test results indicate that the wing-mounted thrust reverser concept can achieve overall thrust reverser effectiveness levels competitive with (parallel mount), or better than (normal mount) a conventional cascade thrust reverser system. By removing the thrust reverser system from the nacelle, the wing-mounted concept offers the nacelle designer more options for improving nacelle aero dynamics and propulsion-airframe integration, simplifying nacelle structural designs, reducing nacelle weight, and improving engine maintenance access.

LOTS of LTA applications

NASA Technical Reports Server (NTRS)

Brown, J. S.

1975-01-01

Current problems facing the logistical planner in utilizing the new ships of the modern, intermodal sea transportation systems in a logistics-over-the-shore (undeveloped) environment are described. Then the employment of two potential LTA vehicle systems are described and discussed as significant parts of possible solutions to this range of logistical problems. Vulnerability aspects of these LTA vehicles are also briefly addressed because of their possible employment near combat areas.

Analysis of Unmanned Systems in Military Logistics

DTIC Science & Technology

2016-12-01

opportunities to employ unmanned systems to support logistic operations. 14. SUBJECT TERMS unmanned systems, robotics , UAVs, UGVs, USVs, UUVs, military...Industrial Robots at Warehouses / Distribution Centers .............................................................................. 17 2. Unmanned...Autonomous Robot Gun Turret. Source: Blain (2010)................................................... 33 Figure 4. Robot Sentries for Base Patrol

Preliminary analysis of an integrated logistics system for OSSA payloads. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Palguta, T.; Bradley, W.; Stockton, T.

1988-01-01

The purpose is to describe the logistics study background and approach to providing estimates of of logistics support requirements for Office of Space Science and Applications' payloads in the Space Station era. A concise summary is given of the study results. Future logistics support analysis tasks are identified.

Software Development With Application Generators: The Naval Aviation Logistics Command Management Information System Case

DTIC Science & Technology

1992-09-01

Aviation Logistics Command Management Information System (NALCOMIS) prototyping development effort, the critical success factors required to implement prototyping with application generators in other areas of DoD.

A robotic system for automation of logistics functions on the Space Station

NASA Technical Reports Server (NTRS)

Martin, J. C.; Purves, R. B.; Hosier, R. N.; Krein, B. A.

1988-01-01

Spacecraft inventory management is currently performed by the crew and as systems become more complex, increased crew time will be required to perform routine logistics activities. If future spacecraft are to function effectively as research labs and production facilities, the efficient use of crew time as a limited resource for performing mission functions must be employed. The use of automation and robotics technology, such as automated warehouse and materials handling functions, can free the crew from many logistics tasks and provide more efficient use of crew time. Design criteria for a Space Station Automated Logistics Inventory Management System is focused on through the design and demonstration of a mobile two armed terrestrial robot. The system functionally represents a 0 gravity automated inventory management system and the problems associated with operating in such an environment. Features of the system include automated storage and retrieval, item recognition, two armed robotic manipulation, and software control of all inventory item transitions and queries.

Inventory Optimization of USMC Uniforms Through Reverse Logistics

DTIC Science & Technology

2016-05-01

Blouse, Desert, MCCUU wiPermethrin 3 $ 38.86 $ 116.58 8415-01-527-1430 03092 Blouse, Woodland, MCCUU wiPermethrin 2 $ 38.90 $ 77.80 8430-01-591· 1103 ...1 $ 11.66 $ 11.66 8455-01-503- 1103 10054 Clasp, Necktie, Gold Plated 1 $ 1.46 $ 1.46 8405-01-279-5579 02049 Coat, Man’s PolyiWool Gabardne, Green. w...Woodland, MCCUU wiPermethrin 2 $ 38.90 $ 77.80 8430-01-591· 1103 04094 Boot, Rugged All Terrain (RAT), Hot Weather $ 141.70 $ 141.70 8430-01-563-6897 03544

Outsourcing vaccine logistics to the private sector: The evidence and lessons learned from the Western Cape Province in South-Africa.

PubMed

Lydon, Patrick; Raubenheimer, Ticky; Arnot-Krüger, Michelle; Zaffran, Michel

2015-06-26

With few exceptions, immunization supply chains in developing countries continue to face chronic difficulties in providing uninterrupted availability of potent vaccines up to service delivery levels, and in the most efficient manner possible. As these countries struggle to keep pace with an ever growing number of vaccines, more and more Ministries of Health are considering options of engaging the private sector to manage vaccine storage, handling and distribution on their behalf. Despite this emerging trend, there is limited evidence on the benefits or challenges of this option to improve public supply chain performance for national immunization programmes. To bridge this knowledge gap, this study aims to shed light on the value proposition of outsourcing by documenting the specific experience of the Western Cape Province of South Africa. The methodology for this review rested on conducting two key supply chain assessments which allowed juxtaposing the performance of the government managed segments of the vaccine supply chain against those managed by the private sector. In particular, measures of effective vaccine management best practice and temperature control in the cold chain were analysed. In addition, the costs of engaging the private sector were analysed to get a better understanding of the economics underpinning outsourcing vaccine logistics. The results from this analysis confirmed some of the theoretical benefits of outsourcing to the private sector. Yet, if the experience in the Western Cape can be deemed a successful one, there are several policy and practice implications that developing countries should be mindful of when considering engaging the private sector. While outsourcing can help improve the performance of the vaccine supply chain, it has the potential to do the reverse if done incorrectly. The findings and lessons learnt from the Western Cape experience can serve as a step towards understanding the role of the private sector in immunization supply chain and logistics systems for developing countries. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

78 FR 14279 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to amend a System of Records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records in its inventory of record... Office, 4800 Mark Center Drive, East Tower, 2nd Floor, Suite 02G09, Alexandria, VA 22350-3100...

76 FR 72909 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-28

...; System of Records AGENCY: Defense Logistics Agency, Department of Defense (DoD). ACTION: Notice to amend a system of records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records... Office, 4800 Mark Center Drive, East Tower, 2nd Floor, Suite 02G09, Alexandria, VA 22350- 3100...

78 FR 21600 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-11

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to delete a Systems of Records. SUMMARY: The Defense Logistics Agency is deleting a system of records notice in its existing inventory of... Office, 4800 Mark Center Drive, East Tower, 2nd Floor, Suite 02G09, Alexandria, VA 22350- 3100...

78 FR 17386 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-21

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to alter a System of Records. SUMMARY: The Defense Logistics Agency proposes to alter a system of records in its inventory of record... Office, 4800 Mark Center Drive, East Tower, 2nd Floor, Suite 02G09, Alexandria, VA 22350- 3100...

78 FR 22525 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-16

...; System of Records AGENCY: Defense Logistics Agency, DoD. ACTION: Notice to amend a System of Records. SUMMARY: The Defense Logistics Agency is proposing to amend a system of records in its inventory of record... Office, 4800 Mark Center Drive, East Tower, 2nd Floor, Suite 02G09, Alexandria, VA 22350-3100...

Soviet Railroad Troops: An Updated Review.

DTIC Science & Technology

1980-01-01

4 Existing Soviet Transport System ........................... 4 *Scarcity of the Rail System ...basis for a totally new evaluation of the Soviet logistics system as a whole, significant misunderstanding will arise if rail capabilities are degraded...sizeable superiority in divisions, tanks, and artillery, the austere Soviet logistic system is suitable only for supporting a short war. In fact, the

An Optimal Hierarchical Decision Model for a Regional Logistics Network with Environmental Impact Consideration

PubMed Central

Zhang, Dezhi; Li, Shuangyan

2014-01-01

This paper proposes a new model of simultaneous optimization of three-level logistics decisions, for logistics authorities, logistics operators, and logistics users, for regional logistics network with environmental impact consideration. The proposed model addresses the interaction among the three logistics players in a complete competitive logistics service market with CO2 emission charges. We also explicitly incorporate the impacts of the scale economics of the logistics park and the logistics users' demand elasticity into the model. The logistics authorities aim to maximize the total social welfare of the system, considering the demand of green logistics development by two different methods: optimal location of logistics nodes and charging a CO2 emission tax. Logistics operators are assumed to compete with logistics service fare and frequency, while logistics users minimize their own perceived logistics disutility given logistics operators' service fare and frequency. A heuristic algorithm based on the multinomial logit model is presented for the three-level decision model, and a numerical example is given to illustrate the above optimal model and its algorithm. The proposed model provides a useful tool for modeling competitive logistics services and evaluating logistics policies at the strategic level. PMID:24977209

An optimal hierarchical decision model for a regional logistics network with environmental impact consideration.

PubMed

Zhang, Dezhi; Li, Shuangyan; Qin, Jin

2014-01-01

This paper proposes a new model of simultaneous optimization of three-level logistics decisions, for logistics authorities, logistics operators, and logistics users, for regional logistics network with environmental impact consideration. The proposed model addresses the interaction among the three logistics players in a complete competitive logistics service market with CO2 emission charges. We also explicitly incorporate the impacts of the scale economics of the logistics park and the logistics users' demand elasticity into the model. The logistics authorities aim to maximize the total social welfare of the system, considering the demand of green logistics development by two different methods: optimal location of logistics nodes and charging a CO2 emission tax. Logistics operators are assumed to compete with logistics service fare and frequency, while logistics users minimize their own perceived logistics disutility given logistics operators' service fare and frequency. A heuristic algorithm based on the multinomial logit model is presented for the three-level decision model, and a numerical example is given to illustrate the above optimal model and its algorithm. The proposed model provides a useful tool for modeling competitive logistics services and evaluating logistics policies at the strategic level.

Research on Colorant Systems Whose Characteristics May Be Reversed

DTIC Science & Technology

1974-06-01

U.S. DEPARTMENT OF COMMERCE NatioMl Technical Information Service AD-A024 083 RESEARCH ON COLORANT SYSTEMS WHOSE CHARACTERISTICS MAY BE REVERSED...TR 75-61-CEMEL 2. SOVT ACCESSION NO «■ TITLE (on* SuMtl») RESEARCH ON COLORANT SYSTEMS WHOSE CHARACTERISTICS MAY BE REVERSED T. AUTMONM...estigation of electrically operated color- ant systems by which the color of a surface could be changed in a controlled manner. Four basic

Logistics Automation Master Plan (LAMP). Better Logistics Support through Automation.

DTIC Science & Technology

1983-06-01

office micro-computers, positioned throughout the command chain , by providing real time links between LCA and all users: 2. Goals: Assist HQDA staff in...field i.e., Airland Battle 2000. IV-27 Section V: CONCEPT OF EXECUTION Suply (Retail) A. SRstem Description. I. The Division Logistics Property Book...7. Divisional Direct Support Unit Automated Supply System (DDASS)/Direct pport Level Suply Automation (DLSA). DDASS and DLSA are system development

Assessment of utilization of long acting reversible contraceptive and associated factors among women of reproductive age in Harar City, Ethiopia.

PubMed

Shiferaw, Kasiye; Musa, Abdulbasit

2017-01-01

World health organization report indicated that, in 2013 alone, over 289,000 maternal death that resulted from pregnancy and delivery related complication were reported worldwide indicating a decline of 45% from 1990. The sub-Saharan Africa region alone accounted for 62% of maternal death followed by southern Asian country (24%). Provision of family planning is one of the effective intervention that prevent unwanted and ill spaced pregnancy there by reducing maternal mortality and morbidity. Given that its effectiveness and, associated fewer visits to health facilities, LARC are very important in tackling maternal mortality and morbidity. However, little is known regarding its prevalence in eastern Ethiopia. Thus, this study aimed to assess utilization of long acting reversible contraceptives and associated factors among women of reproductive age groups. A facility based cross-sectional study conducted in Harar city among 402 study participants. The study participants selected by using systematic random sampling method. The quantitative data collected using structured interviewer administered questionnaires. All variables with p-value of ≤ 0.25 in bivariate logistic regression were taken into multivariable model. Variables having p value ≤ 0.05 in the multivariate analysis were taken as significant predictors. Crude and adjusted odds ratios with their 95% confidence intervals were calculated. The study identified that the utilization of long acting reversible contraceptive among mother of reproductive age was 38%. Study participants whose occupation was daily laborer were less likely to utilize long acting reversible contraceptive compared to those whose occupation was house wife (adjusted OR = 0.3; 95% CI 0.01 to 0.8). Moreover, those mothers who were unable to read and write utilize long acting reversible contraceptive 5 times more likely compared to those who were above grade 12 (adjusted OR = 4.9; 95% CI 1.2 to 19.6). The prevalence of long acting reversible contraceptive was found to be low. Maternal education and occupation were factors found to have a significant association with utilization of long acting reversible contraceptive. Community and facility level awareness creation should be reinforced to improve utilization of long acting reversible contraceptives.

Sleep Duration and Midday Napping with 5-Year Incidence and Reversion of Metabolic Syndrome in Middle-Aged and Older Chinese

PubMed Central

Yang, Liangle; Xu, Zengguang; He, Meian; Yang, Handong; Li, Xiulou; Min, Xinwen; Zhang, Ce; Xu, Chengwei; Angileri, Francesca; Légaré, Sébastien; Yuan, Jing; Miao, Xiaoping; Guo, Huan; Yao, Ping; Wu, Tangchun; Zhang, Xiaomin

2016-01-01

Study Objectives: Prospective evidence on the association of sleep duration and midday napping with metabolic syndrome (MetS) is limited. We aimed to examine the associations of sleep duration and midday napping with risk of incidence and reversion of MetS and its components among a middle-aged and older Chinese population. Methods: We included 14,399 subjects from the Dongfeng-Tongji (DFTJ) Cohort Study (2008–2013) who were free of coronary heart disease, stroke, and cancer at baseline. Baseline data were obtained by questionnaires and health examinations. Odds ratios (ORs) and 95% confidence interval (CI) were derived from multivariate logistic regression models. Results: After controlling for potential covariates, longer sleep duration (≥ 9 h) was associated with a higher risk of MetS incidence (OR, 1.29; 95% CI, 1.08–1.55) and lower reversion of MetS (OR, 0.80; 95% CI, 0.66–0.96) compared with sleep duration of 7 to < 8 h; whereas shorter sleep duration (< 6 h) was not related to incidence or reversion of MetS. For midday napping, subjects with longer napping (≥ 90 min) was also associated with a higher risk of MetS incidence and a lower risk of MetS reversion compared with those with napping of 1 to < 30 min (OR, 1.48; 95% CI, 1.05–2.10 and OR, 0.70; 95% CI, 0.52–0.94, respectively). Significance for incidence or reversion of certain MetS components remained in shorter and longer sleepers but disappeared across napping categories. Conclusions: Both longer sleep duration and longer midday napping were potential risk factors for MetS incidence, and concurrently exert adverse effects on MetS reversion. Citation: Yang L, Xu Z, He M, Yang H, Li X, Min X, Zhang C, Xu C, Angileri F, Légaré S, Yuan J, Miao X, Guo H, Yao P, Wu T, Zhang X. Sleep duration and midday napping with 5-year incidence and reversion of metabolic syndrome in middle-aged and older Chinese. SLEEP 2016;39(11):1911–1918. PMID:27450688

Multi-Purpose Logistics Module (MPLM) Cargo Heat Exchanger

NASA Technical Reports Server (NTRS)

Zampiceni, John J.; Harper, Lon T.

2002-01-01

This paper describes the New Shuttle Orbiter's Multi- Purpose Logistics Modulo (MPLM) Cargo Heat Exchanger (HX) and associated MPLM cooling system. This paper presents Heat Exchanger (HX) design and performance characteristics of the system.

Product Definition Data (PDD) Current Environment Report

DOT National Transportation Integrated Search

1989-05-01

The objective of the Air Force Computer-aided Acquisition and Logistics Support (CALS) Program is to improve weapon system reliability, supportability and maintainability, and to reduce the cost of weapon system acquisition and logistics support. As ...

A Reverse Osmosis System for an Advanced Separation Process Laboratory.

ERIC Educational Resources Information Center

Slater, C. S.; Paccione, J. D.

1987-01-01

Focuses on the development of a pilot unit for use in an advanced separations process laboratory in an effort to develop experiments on such processes as reverse osmosis, ultrafiltration, adsorption, and chromatography. Discusses reverse osmosis principles, the experimental system design, and some experimental studies. (TW)

Prototyping with Application Generators: Lessons Learned from the Naval Aviation Logistics Command Management Information System Case

DTIC Science & Technology

1992-10-01

Prototyping with Application Generators: Lessons Learned from the Naval Aviation Logistics Command Management Information System Case. This study... management information system to automate manual Naval aviation maintenance tasks-NALCOMIS. With the use of a fourth-generation programming language

Pattern formation, logistics, and maximum path probability

NASA Astrophysics Data System (ADS)

Kirkaldy, J. S.

1985-05-01

The concept of pattern formation, which to current researchers is a synonym for self-organization, carries the connotation of deductive logic together with the process of spontaneous inference. Defining a pattern as an equivalence relation on a set of thermodynamic objects, we establish that a large class of irreversible pattern-forming systems, evolving along idealized quasisteady paths, approaches the stable steady state as a mapping upon the formal deductive imperatives of a propositional function calculus. In the preamble the classical reversible thermodynamics of composite systems is analyzed as an externally manipulated system of space partitioning and classification based on ideal enclosures and diaphragms. The diaphragms have discrete classification capabilities which are designated in relation to conserved quantities by descriptors such as impervious, diathermal, and adiabatic. Differentiability in the continuum thermodynamic calculus is invoked as equivalent to analyticity and consistency in the underlying class or sentential calculus. The seat of inference, however, rests with the thermodynamicist. In the transition to an irreversible pattern-forming system the defined nature of the composite reservoirs remains, but a given diaphragm is replaced by a pattern-forming system which by its nature is a spontaneously evolving volume partitioner and classifier of invariants. The seat of volition or inference for the classification system is thus transferred from the experimenter or theoretician to the diaphragm, and with it the full deductive facility. The equivalence relations or partitions associated with the emerging patterns may thus be associated with theorems of the natural pattern-forming calculus. The entropy function, together with its derivatives, is the vehicle which relates the logistics of reservoirs and diaphragms to the analog logistics of the continuum. Maximum path probability or second-order differentiability of the entropy in isolation are sufficiently strong interpretations of the second law of thermodynamics to define the approach to and the nature of patterned stable steady states. For many pattern-forming systems these principles define quantifiable stable states as maxima or minima (or both) in the dissipation. An elementary statistical-mechanical proof is offered. To turn the argument full circle, the transformations of the partitions and classes which are predicated upon such minimax entropic paths can through digital modeling be directly identified with the syntactic and inferential elements of deductive logic. It follows therefore that all self-organizing or pattern-forming systems which possess stable steady states approach these states according to the imperatives of formal logic, the optimum pattern with its rich endowment of equivalence relations representing the central theorem of the associated calculus. Logic is thus ``the stuff of the universe,'' and biological evolution with its culmination in the human brain is the most significant example of all the irreversible pattern-forming processes. We thus conclude with a few remarks on the relevance of the contribution to the theory of evolution and to research on artificial intelligence.

Mission Benefits Analysis of Logistics Reduction Technologies

NASA Technical Reports Server (NTRS)

Ewert, Michael K.; Broyan, James Lee, Jr.

2013-01-01

Future space exploration missions will need to use less logistical supplies if humans are to live for longer periods away from our home planet. Anything that can be done to reduce initial mass and volume of supplies or reuse or recycle items that have been launched will be very valuable. Reuse and recycling also reduce the trash burden and associated nuisances, such as smell, but require good systems engineering and operations integration to reap the greatest benefits. A systems analysis was conducted to quantify the mass and volume savings of four different technologies currently under development by NASA s Advanced Exploration Systems (AES) Logistics Reduction and Repurposing project. Advanced clothing systems lead to savings by direct mass reduction and increased wear duration. Reuse of logistical items, such as packaging, for a second purpose allows fewer items to be launched. A device known as a heat melt compactor drastically reduces the volume of trash, recovers water and produces a stable tile that can be used instead of launching additional radiation protection. The fourth technology, called trash-to-gas, can benefit a mission by supplying fuel such as methane to the propulsion system. This systems engineering work will help improve logistics planning and overall mission architectures by determining the most effective use, and reuse, of all resources.

Mission Benefits Analysis of Logistics Reduction Technologies

NASA Technical Reports Server (NTRS)

Ewert, Michael K.; Broyan, James L.

2012-01-01

Future space exploration missions will need to use less logistical supplies if humans are to live for longer periods away from our home planet. Anything that can be done to reduce initial mass and volume of supplies or reuse or recycle items that have been launched will be very valuable. Reuse and recycling also reduce the trash burden and associated nuisances, such as smell, but require good systems engineering and operations integration to reap the greatest benefits. A systems analysis was conducted to quantify the mass and volume savings of four different technologies currently under development by NASA fs Advanced Exploration Systems (AES) Logistics Reduction and Repurposing project. Advanced clothing systems lead to savings by direct mass reduction and increased wear duration. Reuse of logistical items, such as packaging, for a second purpose allows fewer items to be launched. A device known as a heat melt compactor drastically reduces the volume of trash, recovers water and produces a stable tile that can be used instead of launching additional radiation protection. The fourth technology, called trash ]to ]supply ]gas, can benefit a mission by supplying fuel such as methane to the propulsion system. This systems engineering work will help improve logistics planning and overall mission architectures by determining the most effective use, and reuse, of all resources.

Study on the key technology of grain logistics tracking system

NASA Astrophysics Data System (ADS)

Zhen, Tong; Ge, Hongyi; Jiang, Yuying; Che, Yi

2010-07-01

In recent year, with the rapid development of GIS technology, more and more programming problems depend on the GIS technology and professional model system. The solution of auxiliary programming problem by using GIS technology, which has become very popular. GIS is an important tool and technology, that captures, stores, analyzes, manages, and presents data that are linked to location. A grain logistics distribution system based on GIS is established, which provides a visualization scheme during the process of grain circulation and supports users making decision and analyzing for grain logistics enterprise.

Risk assessment of logistics outsourcing based on BP neural network

NASA Astrophysics Data System (ADS)

Liu, Xiaofeng; Tian, Zi-you

The purpose of this article is to evaluate the risk of the enterprises logistics outsourcing. To get this goal, the paper first analysed he main risks existing in the logistics outsourcing, and then set up a risk evaluation index system of the logistics outsourcing; second applied BP neural network into the logistics outsourcing risk evaluation and used MATLAB to the simulation. It proved that the network error is small and has strong practicability. And this method can be used by enterprises to evaluate the risks of logistics outsourcing.

Highly Viscoelastic Reverse Wormlike Micellar Systems from a Mixture of Lecithin, Polyglycerol Fatty Acid Monoesters, and an Oil.

PubMed

Hashizaki, Kaname; Imai, Miko; Yako, Shuhei; Tsusaka, Hitomi; Sakanishi, Yuichi; Saito, Yoshihiro; Fujii, Makiko

2017-09-01

We report new lecithin reverse wormlike micelles with high viscoelasticity formed using lecithin/polyglycerol fatty acid monoester (PGLFA)/oil systems. In this study, the influence of the amphiphilicity (i.e., hydrophile-lipophile balance, HLB) of PGLFA on the phase behavior and rheological properties of reverse wormlike micelles was investigated in detail. PGLFAs with degrees of polymerization of polyglycerol varying between 6-40 and constituent fatty acids with chains between 6-18 carbon atoms long were used. Partial phase diagrams of the lecithin/PGLFA/n-decane systems indicated that the appropriate PGLFA could change the lecithin/oil solution into a highly viscoelastic solution comprising reverse wormlike micelles. Rheological measurements showed that all systems that formed reverse wormlike micelles exhibited an unusual phenomenon called "shear-thickening". Furthermore, reverse wormlike micelles grew as the PGLFA concentration increased and the zero-shear viscosity (η 0 ) of the solution rapidly increased. Our results indicate that the magnitude of the maximum η 0 depends on the degree of polymerization of the constituent polyglycerol in the PGLFA, while the size of the reverse micellar region and the highly viscous region in the phase diagram depends on the HLB value of the PGLFA.

Ascorbyl radical disproportionation in reverse micellar systems

NASA Astrophysics Data System (ADS)

Gębicki, J. L.; Szymańska-Owczarek, M.; Pacholczyk-Sienicka, B.; Jankowski, S.

2018-04-01

Ascorbyl radical was generated by the pulse radiolysis method and observed with the fast kinetic spectrophotometry within reverse micelles stabilized by AOT in n-heptane or by Igepal CO-520 in cyclohexane at different water to surfactant molar ratio, w0. Rate constants for the disproportionation of the ascorbyl radicals were smaller than those for intermicellar exchange for both type of reverse micelles and slower than those in homogeneous aqueous solutions. However, they increased with increasing w0 for AOT/n-heptane system, while they decreased for Igepal CO-520 system. The absorption spectra of ascorbic acid AOT/n-heptane reverse micellar system showed that the "pH" sensed by this molecule is lower than that in respective homogeneous aqueous solutions. The obtained results were rationalized taking into account three main factors (i) preferential location of ascorbic acid molecules in the interfacial region of the both types of reverse micelles; (ii) postulate that the pH of the interface is lower than that of the water pool of reverse micelles and (iii) different structure of the interface of the reverse micelles made by AOT in n-heptane and those formed by Igepal CO-520 I cyclohexane. Some possible consequences of these findings are discussed.

14 CFR 23.933 - Reversing systems.

Code of Federal Regulations, 2013 CFR

2013-01-01

... analysis and testing completed by the engine and propeller manufacturers. [Doc. No. 26344, 58 FR 18971, Apr... only must be designed so that, during any reversal in flight, the engine will produce no more than... engine from producing more than idle thrust when the reversing system malfunctions; except that it may...

14 CFR 23.933 - Reversing systems.

Code of Federal Regulations, 2014 CFR

2014-01-01

... analysis and testing completed by the engine and propeller manufacturers. [Doc. No. 26344, 58 FR 18971, Apr... only must be designed so that, during any reversal in flight, the engine will produce no more than... engine from producing more than idle thrust when the reversing system malfunctions; except that it may...

14 CFR 23.933 - Reversing systems.

Code of Federal Regulations, 2012 CFR

2012-01-01

... analysis and testing completed by the engine and propeller manufacturers. [Doc. No. 26344, 58 FR 18971, Apr... only must be designed so that, during any reversal in flight, the engine will produce no more than... engine from producing more than idle thrust when the reversing system malfunctions; except that it may...

14 CFR 23.933 - Reversing systems.

Code of Federal Regulations, 2011 CFR

2011-01-01

... analysis and testing completed by the engine and propeller manufacturers. [Doc. No. 26344, 58 FR 18971, Apr... only must be designed so that, during any reversal in flight, the engine will produce no more than... engine from producing more than idle thrust when the reversing system malfunctions; except that it may...

14 CFR 23.933 - Reversing systems.

Code of Federal Regulations, 2010 CFR

2010-01-01

... analysis and testing completed by the engine and propeller manufacturers. [Doc. No. 26344, 58 FR 18971, Apr... only must be designed so that, during any reversal in flight, the engine will produce no more than... engine from producing more than idle thrust when the reversing system malfunctions; except that it may...

Focused Logistics; What the Air Force Brings to the Fight

DTIC Science & Technology

2002-04-09

Agency partnered to develop a Strategic Distribution Management Initiative that support the Air Force’s logistics transformation and is linked by Global Command and Control System and Global Combat Support System-Air Force.

Acoustic Multipurpose Cargo Transfer Bag

NASA Technical Reports Server (NTRS)

Baccus, Shelley

2015-01-01

The Logistics Reduction (LR) project within the Advanced Exploration Systems (AES) program is tasked with reducing logistical mass and repurposing logistical items. Multipurpose Cargo Transfer Bags (MCTB) are designed to be the same external volume as a regular cargo transfer bag, the common logistics carrier for the International Space Station. After use as a cargo bag, the MCTB can be unzipped and unfolded to be reused. This Acoustic MCTBs transform into acoustic blankets after the initial logistics carrying objective is complete.

Simulating Sustainment for an Unmanned Logistics System Concept of Operation in Support of Distributed Operations

DTIC Science & Technology

2017-06-01

designed experiment to model and explore a ship-to-shore logistics process supporting dispersed units via three types of ULSs, which vary primarily in...systems, simulation, discrete event simulation, design of experiments, data analysis, simplekit, nearly orthogonal and balanced designs 15. NUMBER OF... designed experiment to model and explore a ship-to-shore logistics process supporting dispersed units via three types of ULSs, which vary primarily

Logistics in Warfare: The Significance of Logistics in the Army of the Cumberland during the Tullahoma and Chickamauga Campaigns

DTIC Science & Technology

2005-06-17

the medical system for the 71 Army of the Cumberland was not as good as it could have been, it was...analysis of the Union Army and the Army of the Cumberland’s logistical system , a single commodity will be followed from the request for it in the field...acknowledge the Civil War Institute (CWI) at Gettysburg College for the many years of

An Analysis of the Air Force Government Operated Civil Engineering Supply Store Logistic System: How Can It Be Improved?

DTIC Science & Technology

1990-09-01

6 Logistics Systems ............ 7 GOCESS Operation . . . . . . . ..... 9 Work Order Processing . . . . ... 12 Job Order Processing . . . . . . . . . . 14...orders and job orders to the Material Control Section will be discussed separately. Work Order Processing . Figure 2 illustrates typical WO processing...logistics function. The JO processing is similar. Job Order Processing . Figure 3 illustrates typical JO processing in a GOCESS operation. As with WOs, this

Teamed for Success: The Imperative for Aligning Systems Engineering and Life Cycle Logistics

DTIC Science & Technology

2013-02-01

January-February 2013 Kobren is director of the DAU Logistics & Sustainment Center, and the DoD Product Support Assessment Human Capital IPT lead...engineering colleagues, here are 10 key life-cycle logistics, product support, and system sustainment tenets to be cognizant of: Decisions You Make Will...and updates to the Life Cycle Sustainment Plan (LCSP). A vast majority of a weapon systems’ total ownership costs are determined by decisions made

Logistic considerations for a successful institutional approach to the endovascular repair of ruptured abdominal aortic aneurysms.

PubMed

Mayer, Dieter; Rancic, Zoran; Pfammatter, Thomas; Hechelhammer, Lukas; Veith, Frank J; Donas, Konstantin; Lachat, Mario

2010-01-01

The value of emergency endovascular aneurysm repair (EVAR) in the setting of ruptured abdominal aortic aneurysm remains controversial owing to differing results. However, interpretation of published results remains difficult as there is a lack of generally accepted protocols or standard operating procedures. Furthermore, such protocols and standard operating procedures often are reported incompletely or not at all, thereby making interpretation of results difficult. We herein report our integrated logistic system for the endovascular treatment of ruptured abdominal aortic aneurysms. Important components of this system are prehospital logistics, in-hospital treatment logistics, and aftercare. Further studies should include details about all of these components, and a description of these logistic components must be included in all future studies of emergency EVAR for ruptured abdominal aortic aneurysms.

[Research on the Application of Lean Management in Medical Consumables Material Logistics Management].

PubMed

Yang, Chai; Zhang, Wei; Gu, Wei; Shen, Aizong

2016-11-01

Solve the problems of high cost, low utilization rate of resources, low medical care quality problem in medical consumables material logistics management for scientific of medical consumables management. Analysis of the problems existing in the domestic medical consumables material logistics management in hospital, based on lean management method, SPD(Supply, Processing, Distribution) for specific applications, combined HBOS(Hospital Business Operation System), HIS (Hospital Information System) system for medical consumables material management. Achieve the lean management in medical consumables material purchase, warehouse construction, push, clinical use and retrospect. Lean management in medical consumables material can effectively control the cost in logistics management, optimize the alocation of resources, liberate unnecessary time of medical staff, improve the quality of medical care. It is a scientific management method.

Reverse Ecology: from systems to environments and back.

PubMed

Levy, Roie; Borenstein, Elhanan

2012-01-01

The structure of complex biological systems reflects not only their function but also the environments in which they evolved and are adapted to. Reverse Ecology-an emerging new frontier in Evolutionary Systems Biology-aims to extract this information and to obtain novel insights into an organism's ecology. The Reverse Ecology framework facilitates the translation of high-throughput genomic data into large-scale ecological data, and has the potential to transform ecology into a high-throughput field. In this chapter, we describe some of the pioneering work in Reverse Ecology, demonstrating how system-level analysis of complex biological networks can be used to predict the natural habitats of poorly characterized microbial species, their interactions with other species, and universal patterns governing the adaptation of organisms to their environments. We further present several studies that applied Reverse Ecology to elucidate various aspects of microbial ecology, and lay out exciting future directions and potential future applications in biotechnology, biomedicine, and ecological engineering.

Advancing Globally Integrated Logistics Effort 2017 Wargame Report

DTIC Science & Technology

2017-09-01

September 2017 Dr. M. Webster Ewell, Jr. Director, Integration and Gaming Team Advanced Technology and Systems Analysis REPORT...release: distribution unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT This report describes the execution and analysis of a logistics game created for...the Joint Staff J-4, Directorate for Logistics. The game , Advancing Globally Integrated Logistics Effort 2017 (AGILE 17), centered on developing a

[Appliancation of logistics in resources management of medical asset].

PubMed

Miroshnichenko, Iu V; Goriachev, A B; Bunin, S A

2011-06-01

The usage of basic regulations of logistics in practical activity for providing joints and military units with medical asset is theoretically justified. The role of logistics in organizing, building and functioning of military (armed forces) medical supply system is found out. The methods of solving urgent problems of improvement the resources management of medical asset on the basis of logistics are presented.

Korean Domestic Third Party Logistics Providers: Reach for a Global Market

DTIC Science & Technology

2010-03-01

receiving resources from oversea, parts production , assembling finished goods, sales, and customer service become more important. This is...businesses. Production can be located in an optimal area while efficient logistics systems allow world-wide distribution. Global logistics is activities...logistics is managing and utilizing production flow from resources to finished goods by gathering scattered production and sales footholds, and

24th Annual Logistics Conference and Exhibition

DTIC Science & Technology

2008-03-13

Mission / Financial • Beliefs • Organizational Cultures Management and Control Systems • Agency Mission Statements • Process Metrics/Key Performance... Juan Arcocha, USA, Deputy Director for Logistics and Engineering, USNORTHCOM MG John Basilica, Jr., ARNG, Director of Logistics, J4, National Guard...Bureau Panelists:  COL Juan Arcocha, USA, Deputy Director for Logistics and Engineering, USNORTHCOM  MG John Basilica, Jr., ARNG, Director of

Reverse engineering biomolecular systems using -omic data: challenges, progress and opportunities.

PubMed

Quo, Chang F; Kaddi, Chanchala; Phan, John H; Zollanvari, Amin; Xu, Mingqing; Wang, May D; Alterovitz, Gil

2012-07-01

Recent advances in high-throughput biotechnologies have led to the rapid growing research interest in reverse engineering of biomolecular systems (REBMS). 'Data-driven' approaches, i.e. data mining, can be used to extract patterns from large volumes of biochemical data at molecular-level resolution while 'design-driven' approaches, i.e. systems modeling, can be used to simulate emergent system properties. Consequently, both data- and design-driven approaches applied to -omic data may lead to novel insights in reverse engineering biological systems that could not be expected before using low-throughput platforms. However, there exist several challenges in this fast growing field of reverse engineering biomolecular systems: (i) to integrate heterogeneous biochemical data for data mining, (ii) to combine top-down and bottom-up approaches for systems modeling and (iii) to validate system models experimentally. In addition to reviewing progress made by the community and opportunities encountered in addressing these challenges, we explore the emerging field of synthetic biology, which is an exciting approach to validate and analyze theoretical system models directly through experimental synthesis, i.e. analysis-by-synthesis. The ultimate goal is to address the present and future challenges in reverse engineering biomolecular systems (REBMS) using integrated workflow of data mining, systems modeling and synthetic biology.

Electrical detection of microwave assisted magnetization reversal by spin pumping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rao, Siddharth; Subhra Mukherjee, Sankha; Elyasi, Mehrdad

2014-03-24

Microwave assisted magnetization reversal has been investigated in a bilayer system of Pt/ferromagnet by detecting a change in the polarity of the spin pumping signal. The reversal process is studied in two material systems, Pt/CoFeB and Pt/NiFe, for different aspect ratios. The onset of the switching behavior is indicated by a sharp transition in the spin pumping voltage. At a threshold value of the external field, the switching process changes from partial to full reversal with increasing microwave power. The proposed method provides a simple way to detect microwave assisted magnetization reversal.

Ionic Control of the Reversal Response of Cilia in Paramecium caudatum

PubMed Central

Naitoh, Yutaka

1968-01-01

The duration of ciliary reversal of Paramecium caudatum in response to changes in external ionic factors was determined with various ionic compositions of both equilibration and stimulation media. The reversal response was found to occur when calcium ions bound by an inferred cellular cation exchange system were liberated in exchange for externally applied cations other than calcium. Factors which affect the duration of the response were (a) initial amount of calcium bound by the cation exchange system, (b) final amount of calcium bound by the system after equilibration with the stimulation medium, and (c) concentration of calcium ions in the stimulation medium. An empirical equation is presented which relates the duration of the response to these three factors. On the basis of these and previously published data, the following hypothesis is proposed for the mechanism underlying ciliary reversal in response to cationic stimulation: Ca++ liberated from the cellular cation exchange system activates a contractile system which is energized by ATP. Contraction of this component results in the reversal of effective beat direction of cilia by a mechanism not yet understood. The duration of reversal in live paramecia is related to the time course of bound calcium release. PMID:4966766

[Evaluation of the performance of the logistics management system of malaria control resources in the Littoral Department, Benin, in 2017].

PubMed

Ouro-Koura, Abdou-Rahim; Sopoh, Emmanuel Ghislain; Sossa, Jerôme Charles; Glèlè-Ahanhanzo, Yolaine; Agueh, Victoire; Ouendo, Edgard-Marius; Ouedraogo, Laurent

2018-01-01

This study aimed to evaluate the performance of the logistics management system (LMS) of malaria control (MC) resources in the Littoral Department, Benin, in 2017. In June 2017, we conducted a cross-sectional evaluative study focusing on the structures for the storage and the disposal of MC resources as well as on staff involved in their management. The performance of the the logistics management system was evaluated on the basis of the observed compliance of the components and sub-components of the "Structure", the "Process" and the "Results" with the norms and standards defined by the Ministry of Health. A total of 36 structures were investigated and secondary target was surveyed. It followed that 52,78% of the structures for the storage and the disposal of MC resources met the requirements for resources storage while only 33.33% of MC resources management staff were trained in logistics management. The performance of the logistics management system of MC resources was inadequate (compliance 59,13 % compared to the expected score). The structure, as well as the process were non-compliant with the standards ( 60,20% and 73.22% compared to the expected score respectively), leading to negative results (41.53% compared to the expected score). The most inadequate sub-component was the logistics management information system (LMIS). This study highlights the role of LMS for better performance of MC resources management. Particular attention should be given to this component.

Enzyme processing of textiles in reverse micellar solution.

PubMed

Sawada, K; Ueda, M

2001-08-23

Scouring of cotton using pectinase enzyme, bioscouring, in reverse micellar system was studied. The effectiveness of bioscouring was evaluated by measuring weight loss of cotton, analyzing pectin and cotton wax remaining and by wetness testing. Pectinase enzyme showed excellent activity even in organic media, and the effectiveness of scouring was equivalent or better than that achieved by conventional alkaline process or bioscouring in aqueous media. Enzymatic modification of wool using protease enzyme in the same system was also studied. It has found that felting property and tensile strength of wool fabrics treated by protease in reverse micellar system were superior to those in aqueous media. Possibilities of utilization of the same system for the subsequent textile dyeing process were also investigated. It was found that cotton and polyester fabrics were dyed satisfactorily by reverse micellar system compared to conventional aqueous system.

Investigation of thermochemical biorefinery sizing and environmental sustainability impacts for conventional supply system and distributed pre-processing supply system designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

David J. Muth, Jr.; Matthew H. Langholtz; Eric C. D. Tan

The 2011 US Billion-Ton Update estimates that by 2030 there will be enough agricultural and forest resources to sustainably provide at least one billion dry tons of biomass annually, enough to displace approximately 30% of the country's current petroleum consumption. A portion of these resources are inaccessible at current cost targets with conventional feedstock supply systems because of their remoteness or low yields. Reliable analyses and projections of US biofuels production depend on assumptions about the supply system and biorefinery capacity, which, in turn, depend upon economic value, feedstock logistics, and sustainability. A cross-functional team has examined combinations of advancesmore » in feedstock supply systems and biorefinery capacities with rigorous design information, improved crop yield and agronomic practices, and improved estimates of sustainable biomass availability. A previous report on biochemical refinery capacity noted that under advanced feedstock logistic supply systems that include depots and pre-processing operations there are cost advantages that support larger biorefineries up to 10 000 DMT/day facilities compared to the smaller 2000 DMT/day facilities. This report focuses on analyzing conventional versus advanced depot biomass supply systems for a thermochemical conversion and refinery sizing based on woody biomass. The results of this analysis demonstrate that the economies of scale enabled by advanced logistics offsets much of the added logistics costs from additional depot processing and transportation, resulting in a small overall increase to the minimum ethanol selling price compared to the conventional logistic supply system. While the overall costs do increase slightly for the advanced logistic supply systems, the ability to mitigate moisture and ash in the system will improve the storage and conversion processes. In addition, being able to draw on feedstocks from further distances will decrease the risk of biomass supply to the conversion facility.« less

Investigation of thermochemical biorefinery sizing and environmental sustainability impacts for conventional supply system and distributed preprocessing supply system designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muth, jr., David J.; Langholtz, Matthew H.; Tan, Eric

2014-03-31

The 2011 US Billion-Ton Update estimates that by 2030 there will be enough agricultural and forest resources to sustainably provide at least one billion dry tons of biomass annually, enough to displace approximately 30% of the country's current petroleum consumption. A portion of these resources are inaccessible at current cost targets with conventional feedstock supply systems because of their remoteness or low yields. Reliable analyses and projections of US biofuels production depend on assumptions about the supply system and biorefinery capacity, which, in turn, depend upon economic value, feedstock logistics, and sustainability. A cross-functional team has examined combinations of advancesmore » in feedstock supply systems and biorefinery capacities with rigorous design information, improved crop yield and agronomic practices, and improved estimates of sustainable biomass availability. A previous report on biochemical refinery capacity noted that under advanced feedstock logistic supply systems that include depots and pre-processing operations there are cost advantages that support larger biorefineries up to 10 000 DMT/day facilities compared to the smaller 2000 DMT/day facilities. This report focuses on analyzing conventional versus advanced depot biomass supply systems for a thermochemical conversion and refinery sizing based on woody biomass. The results of this analysis demonstrate that the economies of scale enabled by advanced logistics offsets much of the added logistics costs from additional depot processing and transportation, resulting in a small overall increase to the minimum ethanol selling price compared to the conventional logistic supply system. While the overall costs do increase slightly for the advanced logistic supply systems, the ability to mitigate moisture and ash in the system will improve the storage and conversion processes. In addition, being able to draw on feedstocks from further distances will decrease the risk of biomass supply to the conversion facility.« less

Analysis of oil-pipeline distribution of multiple products subject to delivery time-windows

NASA Astrophysics Data System (ADS)

Jittamai, Phongchai

This dissertation defines the operational problems of, and develops solution methodologies for, a distribution of multiple products into oil pipeline subject to delivery time-windows constraints. A multiple-product oil pipeline is a pipeline system composing of pipes, pumps, valves and storage facilities used to transport different types of liquids. Typically, products delivered by pipelines are petroleum of different grades moving either from production facilities to refineries or from refineries to distributors. Time-windows, which are generally used in logistics and scheduling areas, are incorporated in this study. The distribution of multiple products into oil pipeline subject to delivery time-windows is modeled as multicommodity network flow structure and mathematically formulated. The main focus of this dissertation is the investigation of operating issues and problem complexity of single-source pipeline problems and also providing solution methodology to compute input schedule that yields minimum total time violation from due delivery time-windows. The problem is proved to be NP-complete. The heuristic approach, a reversed-flow algorithm, is developed based on pipeline flow reversibility to compute input schedule for the pipeline problem. This algorithm is implemented in no longer than O(T·E) time. This dissertation also extends the study to examine some operating attributes and problem complexity of multiple-source pipelines. The multiple-source pipeline problem is also NP-complete. A heuristic algorithm modified from the one used in single-source pipeline problems is introduced. This algorithm can also be implemented in no longer than O(T·E) time. Computational results are presented for both methodologies on randomly generated problem sets. The computational experience indicates that reversed-flow algorithms provide good solutions in comparison with the optimal solutions. Only 25% of the problems tested were more than 30% greater than optimal values and approximately 40% of the tested problems were solved optimally by the algorithms.

Effects of adolescent exposure to methylmercury and d-amphetamine on reversal learning and an extradimensional shift in male mice

PubMed Central

Boomhower, Steven R.; Newland, M. Christopher

2016-01-01

Adolescence is associated with the continued maturation of dopamine neurotransmission and is implicated in the etiology of many psychiatric illnesses. Adolescent exposure to neurotoxicants that distort dopamine neurotransmission, such as methylmercury (MeHg), may modify the effects of chronic d-amphetamine (d-AMP) administration on reversal learning and attentional-set shifting. Male C57Bl/6n mice were randomly assigned to two MeHg-exposure groups (0 ppm and 3 ppm) and two d-AMP-exposure groups (saline and 1 mg/kg/day), producing four treatment groups (n = 10–12/group): Control, MeHg, d-AMP, and MeHg + d-AMP. MeHg exposure (via drinking water) spanned postnatal day 21–59 (the murine adolescent period), and once daily i.p. injections of d-AMP or saline spanned postnatal day 28–42. As adults, mice were trained on a spatial-discrimination-reversal (SDR) task in which the spatial location of a lever press predicted reinforcement. Following two SDRs, a visual-discrimination task (extradimensional shift) was instated in which the presence of a stimulus light above a lever predicted reinforcement. Responding was modeled using a logistic function, which estimated the rate (slope) of a behavioral transition and trials required to complete half a transition (half-max). MeHg, d-AMP, and MeHg + d-AMP exposure increased estimates of half-max on the second reversal. MeHg exposure increased half-max and decreased the slope term following the extradimensional shift, but these effects did not occur following MeHg + d-AMP exposure. MeHg + d-AMP exposure produced more perseverative errors and omissions following a reversal. Adolescent exposure to MeHg can modify the behavioral effects of chronic d-AMP administration. PMID:28287789

Effects of adolescent exposure to methylmercury and d-amphetamine on reversal learning and an extradimensional shift in male mice.

PubMed

Boomhower, Steven R; Newland, M Christopher

2017-04-01

Adolescence is associated with the continued maturation of dopamine neurotransmission and is implicated in the etiology of many psychiatric illnesses. Adolescent exposure to neurotoxicants that distort dopamine neurotransmission, such as methylmercury (MeHg), may modify the effects of chronic d -amphetamine ( d -AMP) administration on reversal learning and attentional-set shifting. Male C57Bl/6n mice were randomly assigned to two MeHg-exposure groups (0 ppm and 3 ppm) and two d -AMP-exposure groups (saline and 1 mg/kg/day), producing four treatment groups (n = 10-12/group): control, MeHg , d -AMP, and MeHg + d -AMP. MeHg exposure (via drinking water) spanned postnatal days 21-59 (the murine adolescent period), and once daily intraperitoneal injections of d -AMP or saline spanned postnatal days 28-42. As adults, mice were trained on a spatial-discrimination-reversal (SDR) task in which the spatial location of a lever press predicted reinforcement. Following 2 SDRs, a visual-discrimination task (extradimensional shift) was instated in which the presence of a stimulus light above a lever predicted reinforcement. Responding was modeled using a logistic function, which estimated the rate (slope) of a behavioral transition and trials required to complete half a transition (half-max). MeHg, d -AMP, and MeHg + d -AMP exposure increased estimates of half-max on the second reversal. MeHg exposure increased half-max and decreased the slope term following the extradimensional shift, but these effects did not occur following MeHg + d -AMP exposure. MeHg + d -AMP exposure produced more perseverative errors and omissions following a reversal. Adolescent exposure to MeHg can modify the behavioral effects of chronic d -AMP administration. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Is the bronchodilator test an useful tool to measure asthma control?

PubMed

Ferrer Galván, Marta; Javier Alvarez Gutiérrez, Francisco; Romero Falcón, Auxiliadora; Romero Romero, Beatriz; Sáez, Antonia; Medina Gallardo, Juan Francisco

2017-05-01

Asthma control includes the control of symptoms and future risk. We sought to evaluate the usefulness of the degree of spirometric reversibility of the forced expiratory volume in one second (FEV 1 ) as the target parameter of control. Patients with bronchial asthma were followed up for one year. The clinical, functional, inflammatory and control parameters of the asthma were collected. The area under the curve (AUC) was estimated to establish the cutoff point of the post-bronchodilator FEV 1 reversibility in relation to non-control asthma. In the univariate analysis, the differences between groups were studied based on the degree of estimated reversibility. Factors with a significance <0.1 were included in the multivariate analysis by binary logistic regression. A total of 407 patients with a mean age of 38.1 ± 16.7 years were included. When the patients were grouped into controlled and non-controlled groups, compared with post-bronchodilator FEV 1 reversibility, the cutoff point obtained for the non-controlled group was ≥10% (sensitivity: 65.8%, specificity: 48.4%, positive predictive value: 69.5%, and AUC: 0.619 [0.533-0.700], p < 0.01). In the year-long follow-up of this group (post-bronchodilator FEV 1 ≥10), an increased use of relief medication was observed, along with a significantly progressive drop in post-bronchodilator FEV 1 and post-bronchodilator FEV 1 /FVC (forced expiratory volume in one second/forced vital capacity). Spirometric reversibility can be useful in assessing control in asthmatic patients and can predict future risk parameters. The cutoff point related to the non-control of asthma found in our work was ≥10%. Copyright © 2017 Elsevier Ltd. All rights reserved.

Contraceptive Sterilization: Introducing A Couple Perspective to Examine Sociodemographic Differences in Use.

PubMed

Eeckhaut, Mieke C W

2017-09-01

Most studies of contraceptive use have relied solely on the woman's perspective, but because men's attitudes and preferences are also important, analytic approaches based on couples should also be explored. Data from the 2006-2010 and 2011-2013 rounds of the National Survey of Family Growth yielded a sample of 4,591 men and women who were married or cohabiting with an opposite-sex partner and who had completed their intended childbearing. Respondents' reports of both their own and their partners' characteristics and behaviors were employed in two sets of analyses examining educational and racial and ethnic differences in contraceptive use: an individualistic approach (using multinomial logistic regression) and a couple approach (using multinomial logistic diagonal reference models). In the full model using the individualistic approach, respondents with less than a high school education were less likely than those with at least a college degree to rely on male sterilization (odds ratios, 0.1-0.2) or a reversible method (0.4-0.5), as opposed to female sterilization. Parallel analyses limited to couples in which partners had the same educational levels (i.e., educationally homogamous couples) showed an even greater difference between those with the least and those with the most schooling (0.03 for male sterilization and 0.2 for a reversible method). When race and ethnicity, which had a much higher level of homogamy, were examined, the approaches yielded more similar results. Research on contraceptive use can benefit from a couple approach, particularly when focusing on partners' characteristics for which homogamy is relatively low. Copyright © 2017 by the Guttmacher Institute.

Marburg Virus Reverse Genetics Systems

PubMed Central

Schmidt, Kristina Maria; Mühlberger, Elke

2016-01-01

The highly pathogenic Marburg virus (MARV) is a member of the Filoviridae family and belongs to the group of nonsegmented negative-strand RNA viruses. Reverse genetics systems established for MARV have been used to study various aspects of the viral replication cycle, analyze host responses, image viral infection, and screen for antivirals. This article provides an overview of the currently established MARV reverse genetic systems based on minigenomes, infectious virus-like particles and full-length clones, and the research that has been conducted using these systems. PMID:27338448

Marburg Virus Reverse Genetics Systems.

PubMed

Schmidt, Kristina Maria; Mühlberger, Elke

2016-06-22

The highly pathogenic Marburg virus (MARV) is a member of the Filoviridae family and belongs to the group of nonsegmented negative-strand RNA viruses. Reverse genetics systems established for MARV have been used to study various aspects of the viral replication cycle, analyze host responses, image viral infection, and screen for antivirals. This article provides an overview of the currently established MARV reverse genetic systems based on minigenomes, infectious virus-like particles and full-length clones, and the research that has been conducted using these systems.

Comment on ``Correlated noise in a logistic growth model''

NASA Astrophysics Data System (ADS)

Behera, Anita; O'Rourke, S. Francesca C.

2008-01-01

We argue that the results published by Ai [Phys. Rev. E 67, 022903 (2003)] on “correlated noise in logistic growth” are not correct. Their conclusion that, for larger values of the correlation parameter λ , the cell population is peaked at x=0 , which denotes a high extinction rate, is also incorrect. We find the reverse behavior to their results, that increasing λ promotes the stable growth of tumor cells. In particular, their results for the steady-state probability, as a function of cell number, at different correlation strengths, presented in Figs. 1 and 2 of their paper show different behavior than one would expect from the simple mathematical expression for the steady-state probability. Additionally, their interpretation that at small values of cell number the steady-state probability increases as the correlation parameter is increased is also questionable. Another striking feature in their Figs. 1 and 3 is that, for the same values of the parameters λ and α , their simulation produces two different curves, both qualitatively and quantitatively.

49 CFR 234.237 - Reverse switch cut-out circuit.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Reverse switch cut-out circuit. 234.237 Section... Maintenance, Inspection, and Testing Maintenance Standards § 234.237 Reverse switch cut-out circuit. A switch... system circuitry, shall be maintained so that the warning system can only be cut out when the switch...

49 CFR 234.237 - Reverse switch cut-out circuit.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Reverse switch cut-out circuit. 234.237 Section... Maintenance, Inspection, and Testing Maintenance Standards § 234.237 Reverse switch cut-out circuit. A switch... system circuitry, shall be maintained so that the warning system can only be cut out when the switch...

Reverse engineering and identification in systems biology: strategies, perspectives and challenges.

PubMed

Villaverde, Alejandro F; Banga, Julio R

2014-02-06

The interplay of mathematical modelling with experiments is one of the central elements in systems biology. The aim of reverse engineering is to infer, analyse and understand, through this interplay, the functional and regulatory mechanisms of biological systems. Reverse engineering is not exclusive of systems biology and has been studied in different areas, such as inverse problem theory, machine learning, nonlinear physics, (bio)chemical kinetics, control theory and optimization, among others. However, it seems that many of these areas have been relatively closed to outsiders. In this contribution, we aim to compare and highlight the different perspectives and contributions from these fields, with emphasis on two key questions: (i) why are reverse engineering problems so hard to solve, and (ii) what methods are available for the particular problems arising from systems biology?

NASA Supportability Engineering Implementation Utilizing DoD Practices and Processes

NASA Technical Reports Server (NTRS)

Smith, David A.; Smith, John V.

2010-01-01

The Ares I design and development program made the determination early in the System Design Review Phase to utilize DoD ILS and LSA approach for supportability engineering as an integral part of the system engineering process. This paper is to provide a review of the overall approach to design Ares-I with an emphasis on a more affordable, supportable, and sustainable launch vehicle. Discussions will include the requirements development, design influence, support concept alternatives, ILS and LSA planning, Logistics support analyses/trades performed, LSA tailoring for NASA Ares Program, support system infrastructure identification, ILS Design Review documentation, Working Group coordination, and overall ILS implementation. At the outset, the Ares I Project initiated the development of the Integrated Logistics Support Plan (ILSP) and a Logistics Support Analysis process to provide a path forward for the management of the Ares-I ILS program and supportability analysis activities. The ILSP provide the initial planning and coordination between the Ares-I Project Elements and Ground Operation Project. The LSA process provided a system engineering approach in the development of the Ares-I supportability requirements; influence the design for supportability and development of alternative support concepts that satisfies the program operability requirements. The LSA planning and analysis results are documented in the Logistics Support Analysis Report. This document was required during the Ares-I System Design Review (SDR) and Preliminary Design Review (PDR) review cycles. To help coordinate the LSA process across the Ares-I project and between programs, the LSA Report is updated and released quarterly. A System Requirement Analysis was performed to determine the supportability requirements and technical performance measurements (TPMs). Two working groups were established to provide support in the management and implement the Ares-I ILS program, the Integrated Logistics Support Working Group (ILSWG) and the Logistics Support Analysis Record Working Group (LSARWG). The Ares I ILSWG is established to assess the requirements and conduct, evaluate analyses and trade studies associated with acquisition logistic and supportability processes and to resolve Ares I integrated logistics and supportability issues. It established a strategic collaborative alliance for coordination of Logistics Support Analysis activates in support of the integrated Ares I vehicle design and development of logistics support infrastructure. A Joint Ares I - Orion LSAR Working Group was established to: 1) Guide the development of Ares-I and Orion LSAR data and serve as a model for future Constellation programs, 2) Develop rules and assumptions that will apply across the Constellation program with regards to the program's LSAR development, and 3) Maintain the Constellation LSAR Style Guide.

Research and application of genetic algorithm in path planning of logistics distribution vehicle

NASA Astrophysics Data System (ADS)

Wang, Yong; Zhou, Heng; Wang, Ying

2017-08-01

The core of the logistics distribution system is the vehicle routing planning, research path planning problem, provide a better solution has become an important issue. In order to provide the decision support for logistics and distribution operations, this paper studies the problem of vehicle routing with capacity constraints (CVRP). By establishing a mathematical model, the genetic algorithm is used to plan the path of the logistics vehicle to meet the minimum logistics and transportation costs.

Analysis of Jingdong Mall Logistics Distribution Model

NASA Astrophysics Data System (ADS)

Shao, Kang; Cheng, Feng

In recent years, the development of electronic commerce in our country to speed up the pace. The role of logistics has been highlighted, more and more electronic commerce enterprise are beginning to realize the importance of logistics in the success or failure of the enterprise. In this paper, the author take Jingdong Mall for example, performing a SWOT analysis of their current situation of self-built logistics system, find out the problems existing in the current Jingdong Mall logistics distribution and give appropriate recommendations.

Unacceptable treatment outcomes and associated factors among India's initial cohorts of multidrug-resistant tuberculosis (MDR-TB) patients under the revised national TB control programme (2007-2011): Evidence leading to policy enhancement.

PubMed

Parmar, Malik M; Sachdeva, Kuldeep Singh; Dewan, Puneet K; Rade, Kiran; Nair, Sreenivas A; Pant, Rashmi; Khaparde, Sunil D

2018-01-01

Globally, India has the world's highest burden of multidrug-resistant tuberculosis (MDR-TB). Programmatic Management of Drug Resistant TB (PMDT) in India began in 2007 and nationwide coverage was achieved in early 2013. Poor initial microbiological outcomes under the Revised National Tuberculosis Control Programme (RNTCP) prompted detailed analysis. This is the first study on factors significantly associated with poor outcomes in MDR-TB patients treated under the RNTCP. To evaluate initial sputum culture conversion, culture reversion and final treatment outcomes among MDR-TB patients registered in India from 2007 to early 2011 who were treated with a standard 24-month regimen under daily-observed treatment. This is a retrospective cohort study. Clinical and microbiological data were abstracted from PMDT records. Initial sputum culture conversion, culture reversion and treatment outcomes were defined by country adaptation of the standard WHO definitions (2008). Cox proportional hazards modeling with logistic regression, multinomial logistic regression and adjusted odds ratio was used to evaluate factors associated with interim and final outcomes respectively, controlling for demographic and clinical characteristics. In the cohort of 3712 MDR-TB patients, 2735 (73.6%) had initial sputum culture conversion at 100 median days (IQR 92-125), of which 506 (18.5%) had culture reversion at 279 median days (IQR 202-381). Treatment outcomes were available for 2264 (60.9%) patients while 1448 (39.0%) patients were still on treatment or yet to have a definite outcome at the time of analysis. Of 2264 patients, 781 (34.5%) had treatment success, 644 (28.4%) died, 670 (29.6%) were lost to follow up, 169 (7.5%) experienced treatment failure or were changed to XDR-TB treatment. Factors significantly associated with either culture non-conversion, culture reversion and/or unfavorable treatment outcomes were baseline BMI < 18; ≥ seven missed doses in intensive phase (IP) and continuation phase (CP); cavitary disease; prior treatment episodes characterized by re-treatment regimen taken twice, longer duration and more episodes of treatment; any weight loss during treatment; males and additional resistance to first line drugs (Ethambutol, Streptomycin). In a subgroup of 104 MDR-TB patients, 62 (59.6%) had Ofloxacin resistance among whom only 25.8% had treatment success, half of the success (54.8%) seen in Ofloxacin sensitive patients. Baseline susceptibility to Ofloxacin (HR 2.04) and Kanamycin (HR 4.55) significantly doubled and quadrupled the chances for culture conversion respectively while baseline susceptibility to Ofloxacin (AOR 0.37) also significantly reduced the odds of unfavorable treatment outcomes (p value ≤0.05) in multinomial logistic regression model. India's initial MDR-TB patients' cohort treated under the RNTCP experienced poor treatment outcomes. To address the factors associated with poor treatment outcomes revealed in our study, a systematic multi-pronged approach would be needed. A series of policies and interventions have been developed to address these factors to improve DR-TB treatment outcomes and are being scaled-up in India.

Unacceptable treatment outcomes and associated factors among India's initial cohorts of multidrug-resistant tuberculosis (MDR-TB) patients under the revised national TB control programme (2007–2011): Evidence leading to policy enhancement

PubMed Central

Sachdeva, Kuldeep Singh; Dewan, Puneet K.; Rade, Kiran; Nair, Sreenivas A.; Pant, Rashmi; Khaparde, Sunil D.

2018-01-01

Background Globally, India has the world’s highest burden of multidrug-resistant tuberculosis (MDR-TB). Programmatic Management of Drug Resistant TB (PMDT) in India began in 2007 and nationwide coverage was achieved in early 2013. Poor initial microbiological outcomes under the Revised National Tuberculosis Control Programme (RNTCP) prompted detailed analysis. This is the first study on factors significantly associated with poor outcomes in MDR-TB patients treated under the RNTCP. Objective To evaluate initial sputum culture conversion, culture reversion and final treatment outcomes among MDR-TB patients registered in India from 2007 to early 2011 who were treated with a standard 24-month regimen under daily-observed treatment. Methods This is a retrospective cohort study. Clinical and microbiological data were abstracted from PMDT records. Initial sputum culture conversion, culture reversion and treatment outcomes were defined by country adaptation of the standard WHO definitions (2008). Cox proportional hazards modeling with logistic regression, multinomial logistic regression and adjusted odds ratio was used to evaluate factors associated with interim and final outcomes respectively, controlling for demographic and clinical characteristics. Results In the cohort of 3712 MDR-TB patients, 2735 (73.6%) had initial sputum culture conversion at 100 median days (IQR 92–125), of which 506 (18.5%) had culture reversion at 279 median days (IQR 202–381). Treatment outcomes were available for 2264 (60.9%) patients while 1448 (39.0%) patients were still on treatment or yet to have a definite outcome at the time of analysis. Of 2264 patients, 781 (34.5%) had treatment success, 644 (28.4%) died, 670 (29.6%) were lost to follow up, 169 (7.5%) experienced treatment failure or were changed to XDR-TB treatment. Factors significantly associated with either culture non-conversion, culture reversion and/or unfavorable treatment outcomes were baseline BMI < 18; ≥ seven missed doses in intensive phase (IP) and continuation phase (CP); cavitary disease; prior treatment episodes characterized by re-treatment regimen taken twice, longer duration and more episodes of treatment; any weight loss during treatment; males and additional resistance to first line drugs (Ethambutol, Streptomycin). In a subgroup of 104 MDR-TB patients, 62 (59.6%) had Ofloxacin resistance among whom only 25.8% had treatment success, half of the success (54.8%) seen in Ofloxacin sensitive patients. Baseline susceptibility to Ofloxacin (HR 2.04) and Kanamycin (HR 4.55) significantly doubled and quadrupled the chances for culture conversion respectively while baseline susceptibility to Ofloxacin (AOR 0.37) also significantly reduced the odds of unfavorable treatment outcomes (p value ≤0.05) in multinomial logistic regression model. Conclusion India’s initial MDR-TB patients’ cohort treated under the RNTCP experienced poor treatment outcomes. To address the factors associated with poor treatment outcomes revealed in our study, a systematic multi-pronged approach would be needed. A series of policies and interventions have been developed to address these factors to improve DR-TB treatment outcomes and are being scaled-up in India. PMID:29641576

Chaos in the fractional order logistic delay system: Circuit realization and synchronization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baskonus, Haci Mehmet; Hammouch, Zakia; Mekkaoui, Toufik

2016-06-08

In this paper, we present a numerical study and a circuit design to prove existence of chaos in the fractional order Logistic delay system. In addition, we investigate an active control synchronization scheme in this system. Numerical and cicruit simulations show the effectiveness and feasibility of this method.

Automatic Generation of Customized, Model Based Information Systems for Operations Management.

DTIC Science & Technology

The paper discusses the need for developing a customized, model based system to support management decision making in the field of operations ... management . It provides a critique of the current approaches available, formulates a framework to classify logistics decisions, and suggests an approach for the automatic development of logistics systems. (Author)

A Comparison of Alternative Methods of Obtaining Defense Logistics Agency (DLA) Cognizance Spare Parts for Contractor Furnished Equipment (CFE) during Initial Outfitting of New Construction U.S. Navy Ships

DTIC Science & Technology

1991-12-01

database, the Real Time Operation Management Information System (ROMIS), and Fitting Out Management Information System (FOMIS). These three configuration...Codes ROMIS Real Time Operation Management Information System SCLSIS Ship’s Configuration and Logistics Information System SCN Shipbuilding and

Intrahippocampal Administration of an NMDA Receptor Antagonist Impairs Spatial Discrimination Reversal Learning in Weanling Rats

PubMed Central

Watson, Deborah J.; Stanton, Mark E.

2009-01-01

Systemic administration of MK-801, an NMDA receptor antagonist, impairs reversal learning in weanling rats (Chadman, Watson, & Stanton, 2006). The brain systems responsible for this effect are not known in either adult or young animals. This study tested the hypothesis that hippocampal NMDA receptors are engaged in weanling-age rats during spatial discrimination reversal training in a T-maze. In Experiment 1, 26-day-old Long-Evans rats (P26) showed a dose-related impairment on this task following bilateral intrahippocampal administration of either 2.5 or 5.0 μg MK-801 or saline vehicle during the reversal training phase only. In Experiment 2, P26 rats were trained on the same task, but received intrahippocampal MK-801 (2.5 μg) during acquisition, reversal, both, or neither. MK-801 failed to impair acquisition, ruling out nonspecific “performance effects” of the drug. MK-801 impaired reversal irrespective of drug treatment during acquisition. NMDA receptor antagonism in the hippocampus is sufficient to account for the previously reported effects of systemic MK-801 on reversal of T-maze position discrimination. PMID:19248837

Reliability Driven Space Logistics Demand Analysis

NASA Technical Reports Server (NTRS)

Knezevic, J.

1995-01-01

Accurate selection of the quantity of logistic support resources has a strong influence on mission success, system availability and the cost of ownership. At the same time the accurate prediction of these resources depends on the accurate prediction of the reliability measures of the items involved. This paper presents a method for the advanced and accurate calculation of the reliability measures of complex space systems which are the basis for the determination of the demands for logistics resources needed during the operational life or mission of space systems. The applicability of the method presented is demonstrated through several examples.

Logistics Enterprise Evaluation Model Based On Fuzzy Clustering Analysis

NASA Astrophysics Data System (ADS)

Fu, Pei-hua; Yin, Hong-bo

In this thesis, we introduced an evaluation model based on fuzzy cluster algorithm of logistics enterprises. First of all,we present the evaluation index system which contains basic information, management level, technical strength, transport capacity,informatization level, market competition and customer service. We decided the index weight according to the grades, and evaluated integrate ability of the logistics enterprises using fuzzy cluster analysis method. In this thesis, we introduced the system evaluation module and cluster analysis module in detail and described how we achieved these two modules. At last, we gave the result of the system.

Logistics Reduction and Repurposing Technology for Long Duration Space Missions

NASA Technical Reports Server (NTRS)

Broyan, James Lee, Jr.; Chu, Andrew; Ewert, Michael K.

2014-01-01

One of NASA's Advanced Exploration Systems (AES) projects is the Logistics Reduction and Repurposing (LRR) project, which has the goal of reducing logistics resupply items through direct and indirect means. Various technologies under development in the project will reduce the launch mass of consumables and their packaging, enable reuse and repurposing of items, and make logistics tracking more efficient. Repurposing also reduces the trash burden onboard spacecraft and indirectly reduces launch mass by one manifest item having two purposes rather than two manifest items each having only one purpose. This paper provides the status of each of the LRR technologies in their third year of development under AES. Advanced clothing systems (ACSs) are being developed to enable clothing to be worn longer, directly reducing launch mass. ACS has completed a ground exercise clothing study in preparation for an International Space Station technology demonstration in 2014. Development of launch packaging containers and other items that can be repurposed on-orbit as part of habitation outfitting has resulted in a logistics-to-living (L2L) concept. L2L has fabricated and evaluated several multi-purpose cargo transfer bags for potential reuse on-orbit. Autonomous logistics management is using radio frequency identification (RFID) to track items and thus reduce crew time for logistics functions. An RFID dense reader prototype is under construction and plans for integrated testing are being made. A heat melt compactor (HMC) second generation unit for processing trash into compact and stable tiles is nearing completion. The HMC prototype compaction chamber has been completed and system development testing is under way. Research has been conducted on the conversion of trash-to-gas (TtG) for high levels of volume reduction and for use in propulsion systems. A steam reformation system was selected for further system definition of the TtG technology.

Logistics Reduction and Repurposing Technology for Long Duration Space Missions

NASA Technical Reports Server (NTRS)

Broyan, James L.; Chu, Andrew; Ewert, Michael K.

2014-01-01

One of NASA's Advanced Exploration Systems (AES) projects is the Logistics Reduction and Repurposing (LRR) project, which has the goal of reducing logistics resupply items through direct and indirect means. Various technologies under development in the project will reduce the launch mass of consumables and their packaging, enable reuse and repurposing of items and make logistics tracking more efficient. Repurposing also reduces the trash burden onboard spacecraft and indirectly reduces launch mass by replacing some items on the manifest. Examples include reuse of trash as radiation shielding or propellant. This paper provides the status of the LRR technologies in their third year of development under AES. Advanced clothing systems (ACS) are being developed to enable clothing to be worn longer, directly reducing launch mass. ACS has completed a ground exercise clothing study in preparation for an International Space Station (ISS) technology demonstration in 2014. Development of launch packaging containers and other items that can be repurposed on-orbit as part of habitation outfitting has resulted in a logistics-to-living (L2L) concept. L2L has fabricated and evaluated several multi-purpose cargo transfer bags (MCTBs) for potential reuse on orbit. Autonomous logistics management (ALM) is using radio frequency identification (RFID) to track items and thus reduce crew requirements for logistics functions. An RFID dense reader prototype is under construction and plans for integrated testing are being made. Development of a heat melt compactor (HMC) second generation unit for processing trash into compact and stable tiles is nearing completion. The HMC prototype compaction chamber has been completed and system development testing is underway. Research has been conducted on the conversion of trash-to-gas (TtG) for high levels of volume reduction and for use in propulsion systems. A steam reformation system was selected for further system definition of the TtG technology. And benefits analysis of all LRR technologies have been updated with the latest test and analysis results.

Logistics Management: Cases Studies,

DTIC Science & Technology

LOGISTICS , * MANAGEMENT PLANNING AND CONTROL), DECISION MAKING, INVENTORY CONTROL, SPARE PARTS, AIR FORCE EQUIPMENT, NAVAL AIRCRAFT, MAINTENANCE, DEPLOYMENT, SCHEDULING, SYSTEMS ENGINEERING, TEXTBOOKS

Micro-Logistics Analysis for Human Space Exploration

NASA Technical Reports Server (NTRS)

Cirillo, William; Stromgren, Chel; Galan, Ricardo

2008-01-01

Traditionally, logistics analysis for space missions has focused on the delivery of elements and goods to a destination. This type of logistics analysis can be referred to as "macro-logistics". While the delivery of goods is a critical component of mission analysis, it captures only a portion of the constraints that logistics planning may impose on a mission scenario. The other component of logistics analysis concerns the local handling of goods at the destination, including storage, usage, and disposal. This type of logistics analysis, referred to as "micro-logistics", may also be a primary driver in the viability of a human lunar exploration scenario. With the rigorous constraints that will be placed upon a human lunar outpost, it is necessary to accurately evaluate micro-logistics operations in order to develop exploration scenarios that will result in an acceptable level of system performance.

48 CFR 204.7202-1 - CAGE codes.

Code of Federal Regulations, 2014 CFR

2014-10-01

... issued by DLA Logistics Information Service. (Their address is: Customer Service, Federal Center, 74... Logistics Information Service assigns or records and maintains CAGE codes to identify commercial and... Volume 7 of DoD 4100.39-M, Federal Logistics Information System (FLIS) Procedures Manual, prescribe use...

48 CFR 204.7202-1 - CAGE codes.

Code of Federal Regulations, 2011 CFR

2011-10-01

... issued by DLA Logistics Information Service. (Their address is: Customer Service, Federal Center, 74... Logistics Information Service assigns or records and maintains CAGE codes to identify commercial and... Volume 7 of DoD 4100.39-M, Federal Logistics Information System (FLIS) Procedures Manual, prescribe use...

48 CFR 204.7202-1 - CAGE codes.

Code of Federal Regulations, 2013 CFR

2013-10-01

... issued by DLA Logistics Information Service. (Their address is: Customer Service, Federal Center, 74... Logistics Information Service assigns or records and maintains CAGE codes to identify commercial and... Volume 7 of DoD 4100.39-M, Federal Logistics Information System (FLIS) Procedures Manual, prescribe use...

48 CFR 204.7202-1 - CAGE codes.

Code of Federal Regulations, 2012 CFR

2012-10-01

... issued by DLA Logistics Information Service. (Their address is: Customer Service, Federal Center, 74... Logistics Information Service assigns or records and maintains CAGE codes to identify commercial and... Volume 7 of DoD 4100.39-M, Federal Logistics Information System (FLIS) Procedures Manual, prescribe use...

12 CFR Appendix K to Part 226 - Total Annual Loan Cost Rate Computations for Reverse Mortgage Transactions

Code of Federal Regulations, 2011 CFR

2011-01-01

... Reverse Mortgage Transactions K Appendix K to Part 226 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM TRUTH IN LENDING (REGULATION Z) Pt. 226, App. K Appendix K to Part 226—Total Annual Loan Cost Rate Computations for Reverse Mortgage Transactions (a...

12 CFR Appendix K to Part 226 - Total Annual Loan Cost Rate Computations for Reverse Mortgage Transactions

Code of Federal Regulations, 2012 CFR

2012-01-01

... Reverse Mortgage Transactions K Appendix K to Part 226 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM TRUTH IN LENDING (REGULATION Z) Pt. 226, App. K Appendix K to Part 226—Total Annual Loan Cost Rate Computations for Reverse Mortgage Transactions (a...

12 CFR Appendix K to Part 226 - Total Annual Loan Cost Rate Computations for Reverse Mortgage Transactions

Code of Federal Regulations, 2010 CFR

2010-01-01

... Reverse Mortgage Transactions K Appendix K to Part 226 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM TRUTH IN LENDING (REGULATION Z) Pt. 226, App. K Appendix K to Part 226—Total Annual Loan Cost Rate Computations for Reverse Mortgage Transactions (a...

Apparatus and method for use in storing energy

DOEpatents

Sathrum, Aaron J.

2017-08-01

Some embodiments provide energy storage systems that comprise: a first electrode; a second electrode; an electrolyte; the first electrode, the second electrode and the electrolyte are positioned such that the electrolyte is in contact with at least the first electrode; and a polarity reversal system electrically coupled with the first electrode and the second electrode, wherein the polarity reversal system is configured to allow the energy storage system to operate while a first polarity to charge and discharge electrical energy while operating in the first polarity, and the polarity reversal system is configured to reverse the voltage polarity across the first and second electrodes to a second polarity to allow the energy storage system to continue to operate while the second polarity is established across the first electrode and the second electrode to continue to charge and discharge electrical energy while operating in the second polarity.

77 FR 70738 - Procurement List Additions

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-27

...: C-List for 100% of the requirement of the Naval Supply Systems Command (NAVSUP) Fleet Logistics Center, Jacksonville, FL, as aggregated by the Naval Supply Systems Command (NAVSUP) Fleet Logistics Center, Jacksonville, FL. The Committee for Purchase From People Who Are Blind or Severely Disabled...

[Improving a hospital's supply chain through lean management].

PubMed

Aguilar-Escobar, V G; Garrido-Vega, P; Godino-Gallego, N

2013-01-01

Supply management is an area where hospitals have significant opportunities for improvement. The main objective of this paper has been to analyze how the application of Lean principles can improve logistics costs and user satisfaction. In connection with satisfaction, it also aimed to examine which aspects of the service define it and check for differences between different groups of users. The results of an experience to reorganize the hospital logistic system based on some Lean principles have been studied. This is therefore a case study, which combine different methods of data collection. The logistics cost calculation was carried out using the full costing method. To measure satisfaction of healthcare personnel, the internal logistics service users, an anonymous survey was conducted. Processing of the data obtained from the survey have included exploratory analysis, factor analysis and ANOVAs. The data have showed an improvement in logistics management after the implementation of Lean principles. Logistics costs were reduced and the satisfaction level of the internal users with the new logistics system was increased. Some differences in the degree of satisfaction by different groups of users were also detected, although they did not seem to distinguish between different aspects of logistic service. The analyzed experience shows the applicability and suitability of Lean principles to improve logistics operational costs and increase user satisfaction. Copyright © 2012 SECA. Published by Elsevier Espana. All rights reserved.

Cluster analysis: a new approach for identification of underlying risk factors for coronary artery disease in essential hypertensive patients.

PubMed

Guo, Qi; Lu, Xiaoni; Gao, Ya; Zhang, Jingjing; Yan, Bin; Su, Dan; Song, Anqi; Zhao, Xi; Wang, Gang

2017-03-07

Grading of essential hypertension according to blood pressure (BP) level may not adequately reflect clinical heterogeneity of hypertensive patients. This study was carried out to explore clinical phenotypes in essential hypertensive patients using cluster analysis. This study recruited 513 hypertensive patients and evaluated BP variations with ambulatory blood pressure monitoring. Four distinct hypertension groups were identified using cluster analysis: (1) younger male smokers with relatively high BP had the most severe carotid plaque thickness but no coronary artery disease (CAD); (2) older women with relatively low diastolic BP had more diabetes; (3) non-smokers with a low systolic BP level had neither diabetes nor CAD; (4) hypertensive patients with BP reverse dipping were most likely to have CAD but had least severe carotid plaque thickness. In binary logistic analysis, reverse dipping was significantly associated with prevalence of CAD. Cluster analysis was shown to be a feasible approach for investigating the heterogeneity of essential hypertension in clinical studies. BP reverse dipping might be valuable for prediction of CAD in hypertensive patients when compared with carotid plaque thickness. However, large-scale prospective trials with more information of plaque morphology are necessary to further compare the predicative power between BP dipping pattern and carotid plaque.

Cluster analysis: a new approach for identification of underlying risk factors for coronary artery disease in essential hypertensive patients

PubMed Central

Guo, Qi; Lu, Xiaoni; Gao, Ya; Zhang, Jingjing; Yan, Bin; Su, Dan; Song, Anqi; Zhao, Xi; Wang, Gang

2017-01-01

Grading of essential hypertension according to blood pressure (BP) level may not adequately reflect clinical heterogeneity of hypertensive patients. This study was carried out to explore clinical phenotypes in essential hypertensive patients using cluster analysis. This study recruited 513 hypertensive patients and evaluated BP variations with ambulatory blood pressure monitoring. Four distinct hypertension groups were identified using cluster analysis: (1) younger male smokers with relatively high BP had the most severe carotid plaque thickness but no coronary artery disease (CAD); (2) older women with relatively low diastolic BP had more diabetes; (3) non-smokers with a low systolic BP level had neither diabetes nor CAD; (4) hypertensive patients with BP reverse dipping were most likely to have CAD but had least severe carotid plaque thickness. In binary logistic analysis, reverse dipping was significantly associated with prevalence of CAD. Cluster analysis was shown to be a feasible approach for investigating the heterogeneity of essential hypertension in clinical studies. BP reverse dipping might be valuable for prediction of CAD in hypertensive patients when compared with carotid plaque thickness. However, large-scale prospective trials with more information of plaque morphology are necessary to further compare the predicative power between BP dipping pattern and carotid plaque. PMID:28266630

Reverse engineering and identification in systems biology: strategies, perspectives and challenges

PubMed Central

Villaverde, Alejandro F.; Banga, Julio R.

2014-01-01

The interplay of mathematical modelling with experiments is one of the central elements in systems biology. The aim of reverse engineering is to infer, analyse and understand, through this interplay, the functional and regulatory mechanisms of biological systems. Reverse engineering is not exclusive of systems biology and has been studied in different areas, such as inverse problem theory, machine learning, nonlinear physics, (bio)chemical kinetics, control theory and optimization, among others. However, it seems that many of these areas have been relatively closed to outsiders. In this contribution, we aim to compare and highlight the different perspectives and contributions from these fields, with emphasis on two key questions: (i) why are reverse engineering problems so hard to solve, and (ii) what methods are available for the particular problems arising from systems biology? PMID:24307566

A Macro Analysis of DoD Logistics Systems. Volume 3. A Framework for Policy-Level Logistics Management

DTIC Science & Technology

1978-12-01

prioritization. 5 (We have chosen to use a variation of Saaty’s method in our hierarchical analysis, discussed in chapter 5, but for a purpose different ...the word "framework" to refer to an abstract structure for think- ing through policy-tieel management problems. This structure raises method - ological...readiness and logistics system performance, and we relied heavily on "structural" and trend analysis. By structural analysis, we meant a formal method for

Building the Army of the Republic of Vietnam’s Logistical System: Lessons Learned

DTIC Science & Technology

2016-05-26

to any’ penalty for failing to comply with a collection ot information if it does not display a currently valid OMB control number. PLEASE DO NOT...reliant on US Army capability to a regional depot system that assumed control of all logistical operations as the US Army withdrew. The ARVN logistical...described body of work is determining the reasoning behind US military’s approach, and its overall effectiveness for the South Vietnam. From the collective

Guidelines for the Development and Implementation of a Logistic Resource Annex to the Five Year Defense Program. Volume 4. A Logistic Resource Annex for the Marine Corps Section of the DNFYP

DTIC Science & Technology

1978-10-01

Information ; Logistics Planning; Management Planning and Control; Management Information Systems; Management; Military Supplies; Acquisition; JO...Arlington, Virginia 22202 Contract DAHC 15-73C-0200 Task 78-II-1 CONTENTS GLOSSARY : v SUMMARY ix I. INTRODUCTION 1 II. MARINE CORPS SUPPORT OP...Materiel Command Navy Cost Information System/FYDP Subsystem Non-Industrial Fund Non-Telecommunications Offfice of the Assistant Secretary of Defense

Time reversal acoustics for small targets using decomposition of the time reversal operator

NASA Astrophysics Data System (ADS)

Simko, Peter C.

The method of time reversal acoustics has been the focus of considerable interest over the last twenty years. Time reversal imaging methods have made consistent progress as effective methods for signal processing since the initial demonstration that physical time reversal methods can be used to form convergent wave fields on a localized target, even under conditions of severe multipathing. Computational time reversal methods rely on the properties of the so-called 'time reversal operator' in order to extract information about the target medium. Applications for which time reversal imaging have previously been explored include medical imaging, non-destructive evaluation, and mine detection. Emphasis in this paper will fall on two topics within the general field of computational time reversal imaging. First, we will examine previous work on developing a time reversal imaging algorithm based on the MUltiple SIgnal Classification (MUSIC) algorithm. MUSIC, though computationally very intensive, has demonstrated early promise in simulations using array-based methods applicable to true volumetric (three-dimensional) imaging. We will provide a simple algorithm through which the rank of the time reversal operator subspaces can be properly quantified so that the rank of the associated null subspace can be accurately estimated near the central pulse wavelength in broadband imaging. Second, we will focus on the scattering from small acoustically rigid two dimensional cylindrical targets of elliptical cross section. Analysis of the time reversal operator eigenmodes has been well-studied for symmetric response matrices associated with symmetric systems of scattering targets. We will expand these previous results to include more general scattering systems leading to asymmetric response matrices, for which the analytical complexity increases but the physical interpretation of the time reversal operator remains unchanged. For asymmetric responses, the qualitative properties of the time reversal operator eigenmodes remain consistent with those obtained from the more tightly constrained systems.

The Use of Computer Simulation Methods to Reach Data for Economic Analysis of Automated Logistic Systems

NASA Astrophysics Data System (ADS)

Neradilová, Hana; Fedorko, Gabriel

2016-12-01

Automated logistic systems are becoming more widely used within enterprise logistics processes. Their main advantage is that they allow increasing the efficiency and reliability of logistics processes. In terms of evaluating their effectiveness, it is necessary to take into account the economic aspect of the entire process. However, many users ignore and underestimate this area,which is not correct. One of the reasons why the economic aspect is overlooked is the fact that obtaining information for such an analysis is not easy. The aim of this paper is to present the possibilities of computer simulation methods for obtaining data for full-scale economic analysis implementation.

Time-reversal-invariant spin-orbit-coupled bilayer Bose-Einstein condensates

NASA Astrophysics Data System (ADS)

Maisberger, Matthew; Wang, Lin-Cheng; Sun, Kuei; Xu, Yong; Zhang, Chuanwei

2018-05-01

Time-reversal invariance plays a crucial role for many exotic quantum phases, particularly for topologically nontrivial states, in spin-orbit coupled electronic systems. Recently realized spin-orbit coupled cold-atom systems, however, lack the time-reversal symmetry due to the inevitable presence of an effective transverse Zeeman field. We address this issue by analyzing a realistic scheme to preserve time-reversal symmetry in spin-orbit-coupled ultracold atoms, with the use of Hermite-Gaussian-laser-induced Raman transitions that preserve spin-layer time-reversal symmetry. We find that the system's quantum states form Kramers pairs, resulting in symmetry-protected gap closing of the lowest two bands at arbitrarily large Raman coupling. We also show that Bose gases in this setup exhibit interaction-induced layer-stripe and uniform phases as well as intriguing spin-layer symmetry and spin-layer correlation.

Reverse innovation: an opportunity for strengthening health systems.

PubMed

Snowdon, Anne W; Bassi, Harpreet; Scarffe, Andrew D; Smith, Alexander D

2015-02-07

Canada, when compared to other OECD countries, ranks poorly with respect to innovation and innovation adoption while struggling with increasing health system costs. As a result of its failure to innovate, the Canadian health system will struggle to meet the needs and demands of both current and future populations. The purpose of this initiative was to explore if a competition-based reverse innovation challenge could mobilize and stimulate current and future leaders to identify and lead potential reverse innovation projects that address health system challenges in Canada. An open call for applications took place over a 4-month period. Applicants were enticed to submit to the competition with a $50,000 prize for the top submission to finance their project. Leaders from a wide cross-section of sectors collectively developed evaluation criteria and graded the submissions. The criteria evaluated: proof of concept, potential value, financial impact, feasibility, and scalability as well as the use of prize money and innovation team. The competition received 12 submissions from across Canada that identified potential reverse innovations from 18 unique geographical locations that were considered developing and/or emerging markets. The various submissions addressed health system challenges relating to education, mobile health, aboriginal health, immigrant health, seniors health and women's health and wellness. Of the original 12 submissions, 5 finalists were chosen and publically profiled, and 1 was chosen to receive the top prize. The results of this initiative demonstrate that a competition that is targeted to reverse innovation does have the potential to mobilize and stimulate leaders to identify reverse innovations that have the potential for system level impact. The competition also provided important insights into the capacity of Canadian students, health care providers, entrepreneurs, and innovators to propose and implement reverse innovation in the context of the Canadian health system.

Outsourcing Operational Logistics: Buyer Beware

DTIC Science & Technology

2003-05-16

This logistics system takes far too many people to conduct support missions and does not provide the desired customer performance in terms of...FINAL 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER OUTSOURCING OPERATIONAL LOGISTICS: BUYER BEWARE (U) 5b. GRANT NUMBER 5c...Form 298 (Rev. 8-98) 1 (Unclassified Paper) NAVAL WAR COLLEGE Newport, R.I. OUTSOURCING OPERATIONAL LOGISTICS: BUYER BEWARE By LAMONT WOODY Lieutenant

Pulse cleaning flow models and numerical computation of candle ceramic filters.

PubMed

Tian, Gui-shan; Ma, Zhen-ji; Zhang, Xin-yi; Xu, Ting-xiang

2002-04-01

Analytical and numerical computed models are developed for reverse pulse cleaning system of candle ceramic filters. A standard turbulent model is demonstrated suitably to the designing computation of reverse pulse cleaning system from the experimental and one-dimensional computational result. The computed results can be used to guide the designing of reverse pulse cleaning system, which is optimum Venturi geometry. From the computed results, the general conclusions and the designing methods are obtained.

Generation of recombinant rotaviruses expressing fluorescent proteins using an optimized reverse genetics system.

PubMed

Komoto, Satoshi; Fukuda, Saori; Ide, Tomihiko; Ito, Naoto; Sugiyama, Makoto; Yoshikawa, Tetsushi; Murata, Takayuki; Taniguchi, Koki

2018-04-18

An entirely plasmid-based reverse genetics system for rotaviruses was established very recently. We improved the reverse genetics system to generate recombinant rotavirus by transfecting only 11 cDNA plasmids for its 11 gene segments under the condition of increasing the ratio of the cDNA plasmids for NSP2 and NSP5 genes. Utilizing this highly efficient system, we then engineered infectious recombinant rotaviruses expressing bioluminescent (NanoLuc luciferase) and fluorescent (EGFP and mCherry) reporters. These recombinant rotaviruses expressing reporters remained genetically stable during serial passages. Our reverse genetics approach and recombinant rotaviruses carrying reporter genes will be great additions to the tool kit for studying the molecular virology of rotavirus, and for developing future next-generation vaccines and expression vectors. IMPORTANCE Rotavirus is one of the most important pathogens causing severe gastroenteritis in young children worldwide. In this paper, we describe a robust and simple reverse genetics system based on only rotavirus cDNAs, and its application for engineering infectious recombinant rotaviruses harboring bioluminescent (NanoLuc) and fluorescent (EGFP and mCherry) protein genes. This highly efficient reverse genetics system and recombinant RVAs expressing reporters could be powerful tools for the study of different aspects of rotavirus replication. Furthermore, they may be useful for next-generation vaccine production for this medically important virus. Copyright © 2018 American Society for Microbiology.

Product-to-parent reversion processes: Stream-hyporheic spiraling increases ecosystem exposure and environmental persistence

NASA Astrophysics Data System (ADS)

Ward, A. S.; Cwiertny, D. M.; Kolodziej, E. P.

2014-12-01

The product-to-parent reversion of metabolites of trenbolone acetate (TBA), a steroidal growth promoter used widely in beef cattle production, was recently observed to occur in environmental waters. The rapid forward reaction is by direct photolysis (i.e., photohydration), with the much slower reversion reaction occurring via dehydration in the dark. The objective of this study is to quantify the potential effect of this newly discovered reversible process on TBA metabolite concentrations and total bioactivity exposure in fluvial systems. Here, we demonstrate increased persistence of TBA metabolites in the stream and hyporheic zone due to the reversion process, increasing chronic and acute exposure to these endocrine-active compounds along a stream. The perpetually dark hyporheic zone is a key location for reversion in the system, ultimately providing a source of the parent compound to the stream and increasing mean in-stream concentration of 17α-trenbolone (17α-TBOH) by 40% of the input concentration under representative fluvial conditions. As such, regulatory frameworks for compounds undergoing product-to-parent reversion will require new approaches for assessing total exposure to bioactive compounds. Further, we demonstrate generalized cases for prediction of exposure for species with product-to-parent reversion in stream-hyporheic systems.

Pump dependence of the dynamics of quantum dot based waveguide absorbers

NASA Astrophysics Data System (ADS)

Viktorov, Evgeny A.; Erneux, Thomas; Piwonski, Tomasz; Pulka, Jaroslaw; Huyet, Guillaume; Houlihan, John

2012-06-01

The nonlinear two stage recovery of quantum dot based reverse-biased waveguide absorbers is investigated experimentally and analytically as a function of the initial ground state occupation probability of the dot. The latter is controlled experimentally by the pump pulse power. The slow stage of the recovery is exponential and its basic timescale is independent of pump power. The fast stage of the recovery is a logistic function which we analyze in detail. The relative strength of slow to fast components is highlighted and the importance of higher order absorption processes at the highest pump level is demonstrated.

Applications of Evolutionary Technology to Manufacturing and Logistics Systems : State-of-the Art Survey

NASA Astrophysics Data System (ADS)

Gen, Mitsuo; Lin, Lin

Many combinatorial optimization problems from industrial engineering and operations research in real-world are very complex in nature and quite hard to solve them by conventional techniques. Since the 1960s, there has been an increasing interest in imitating living beings to solve such kinds of hard combinatorial optimization problems. Simulating the natural evolutionary process of human beings results in stochastic optimization techniques called evolutionary algorithms (EAs), which can often outperform conventional optimization methods when applied to difficult real-world problems. In this survey paper, we provide a comprehensive survey of the current state-of-the-art in the use of EA in manufacturing and logistics systems. In order to demonstrate the EAs which are powerful and broadly applicable stochastic search and optimization techniques, we deal with the following engineering design problems: transportation planning models, layout design models and two-stage logistics models in logistics systems; job-shop scheduling, resource constrained project scheduling in manufacturing system.

Automatic Ammunition Identification Technology Project. Ammunition Logistics Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weil, B.

1993-03-01

The Automatic Ammunition Identification Technology (AAIT) Project is an activity of the Robotics & Process Systems Division at the Oak Ridge National Laboratory (ORNL) for the US Army`s Project Manager-Ammunition Logistics (PM-AMMOLOG) at the Picatinny Arsenal in Picatinny, New Jersey. The project objective is to evaluate new two-dimensional bar code symbologies for potential use in ammunition logistics systems and automated reloading equipment. These new symbologies are a significant improvement over typical linear bar codes since machine-readable alphanumeric messages up to 2000 characters long are achievable. These compressed data symbologies are expected to significantly improve logistics and inventory management tasks andmore » permit automated feeding and handling of ammunition to weapon systems. The results will be increased throughout capability, better inventory control, reduction of human error, lower operation and support costs, and a more timely re-supply of various weapon systems. This paper will describe the capabilities of existing compressed data symbologies and the symbol testing activities being conducted at ORNL for the AAIT Project.« less

An IPSO-SVM algorithm for security state prediction of mine production logistics system

NASA Astrophysics Data System (ADS)

Zhang, Yanliang; Lei, Junhui; Ma, Qiuli; Chen, Xin; Bi, Runfang

2017-06-01

A theoretical basis for the regulation of corporate security warning and resources was provided in order to reveal the laws behind the security state in mine production logistics. Considering complex mine production logistics system and the variable is difficult to acquire, a superior security status predicting model of mine production logistics system based on the improved particle swarm optimization and support vector machine (IPSO-SVM) is proposed in this paper. Firstly, through the linear adjustments of inertia weight and learning weights, the convergence speed and search accuracy are enhanced with the aim to deal with situations associated with the changeable complexity and the data acquisition difficulty. The improved particle swarm optimization (IPSO) is then introduced to resolve the problem of parameter settings in traditional support vector machines (SVM). At the same time, security status index system is built to determine the classification standards of safety status. The feasibility and effectiveness of this method is finally verified using the experimental results.

A Collection of Technical Papers

NASA Technical Reports Server (NTRS)

1995-01-01

Papers presented at the 6th Space Logistics Symposium covered such areas as: The International Space Station; The Hubble Space Telescope; Launch site computer simulation; Integrated logistics support; The Baikonur Cosmodrome; Probabalistic tools for high confidence repair; A simple space station rescue vehicle; Integrated Traffic Model for the International Space Station; Packaging the maintenance shop; Leading edge software support; Storage information management system; Consolidated maintenance inventory logistics planning; Operation concepts for a single stage to orbit vehicle; Mission architecture for human lunar exploration; Logistics of a lunar based solar power satellite scenario; Just in time in space; NASA acquisitions/logistics; Effective transition management; Shuttle logistics; and Revitalized space operations through total quality control management.

Comparison of Centralized-Manual, Centralized-Computerized, and Decentralized-Computerized Order and Management Information Models for the Turkish Air Force Logistics System.

DTIC Science & Technology

1986-09-01

differentiation between the systems. This study will investigate an appropriate Order Processing and Management Information System (OP&MIS) to link base-level...methodology: 1. Reviewed the current order processing and information model of the TUAF Logistics System. (centralized-manual model) 2. Described the...RDS program’s order processing and information system. (centralized-computerized model) 3. Described the order irocessing and information system of

Marine Tactical Command and Control System (MTACCS) Field Development System-1 (FDS-1) assessment: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Avery, L.W.; Hunt, S.T.; Savage, S.F.

1992-04-01

The United State Marine Corps (USMC) is continuing the development and fielding of the Marine Corps Tactical Command and Control System (MTACCS), a system which exists in varying states of development, fielding, or modernization. MTACCS is currently composed of the following components: Tactical Combat Operations System (TCO) for ground command and control (C2), Intelligence Analysis System (IAS) with a Genser terminal connected to a TCO workstation for intelligence C2, Marine Integrated Personnel System (MIPS) and a TCO workstation using the Marine Combat Personnel System (MCPERS) software for personnel C2, Marine Integrated Logistics System (MILOGS) which is composed of the Landingmore » Force Asset Distribution System (LFADS), the Marine Air-Ground Task Force (MAGTF) II, and a TCO terminal using the Marine Combat Logistics System (MCLOG) for logistics C2, Marine Corps Fire Support System (MCFSS) for fire support C2, and Advanced Tactical Air Command Central (ATACC) and the Improved Direct Air Support Central for aviation C2.« less

Dual Use of Packaging on the Moon: Logistics-2-Living

NASA Technical Reports Server (NTRS)

Howe, A. Scott; Howard, Robert

2010-01-01

This paper describes a modular packaging system for logistics that can be reconfigured into internal outfitting for a lunar outpost, including desks, chairs, partitions, cabinets, and radiation shielding. Logistics include clothes, equipment, food, and other consumables needed to sustain the crew for the duration of the mission. A significant mass penalty is required for the packaging and handling of logistics for re-supply of short to long-term space missions that must be brought out of the gravity well on a launch vehicle. Once the supplies have been exhausted, the packaging material is typically of no further use and is discarded. If a scheme can be developed that reuses the logistics packaging, the mass penalty can be reduced. In this research, a modular packaging system has been devised as a kit-of-parts that can be used for both handling logistics supplies, and then reconfigured into desks, chairs, partitions, cabinets, and radiation shielding. The system is derived from a standard International Space Station (ISS)-type Cargo Transfer Bag (CTB), using soft, unfoldable box-like containers with stiff metal inserts. The empty hydrogen-impregnated CTBs can be used as-is for cabinets, opened up for use as partitions, or draped over the habitat as layers of radiation shielding. Stiff metal inserts can be reconfigured into desks and other useful outfitting.

Preliminary analysis of an integrated logistics system for OSSA payloads. Volume 3: OSSA integrated logistics support planning document

NASA Technical Reports Server (NTRS)

Palguta, T.; Bradley, W.; Stockton, T.

1988-01-01

Guidance in preparing and updating an integrated logistics support plan (ILSP) is given. Clear, concise, and detailed instructions are provided on the preparation and content of an ILSP in order to ensure a quality document that reflects total program requirements.

75 FR 66099 - Ocean Transportation Intermediary License Applicants

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-27

... Global, LLC dba MIQ Logistics (NVO & OFF), 5200 W. 110th Street, Overland Park, IL 66211, Officers: Tina... Fine Systems, Inc. dba Marquis Logistics (NVO), 13460 Brooks Drive, Baldwin Park, CA 91706, Officers... Logistics, Inc. (NVO), 17890 Castleton Street, Suite 398, City of Industry, CA 91748, Officers: Jennifer X...

Management of Customer Service in Terms of Logistics Information Systems

NASA Astrophysics Data System (ADS)

Kampf, Rudolf; Ližbetinová, Lenka; Tišlerová, Kamila

2017-03-01

This paper is focused on perceiving the logistic services as the competition advantage in frame of the ecommerce. Customers consider their purchases in its complexity and all the logistic services should be designed to meet with customers' preferences as much as possible. Our aim was to identify and evaluate of customers perceiving in frame of sales proposals offered by e-shops. Collected data of research were processed with the usage of cluster analysis. The aim of this paper is to present the results and conclusions from this research with focus on the elements of logistics services within e-commerce. These outputs can be used for knowledge base of information systems through which enterprises evaluate their decisions and selection of variants. For the enterprise, it is important to appropriate decisions about resource allocation and design of the structure of logistics services were set based on real customer preferences.

Apparatus and method for controlling the rotary airlocks in a coal processing system by reversing the motor current rotating the air lock

DOEpatents

Groombridge, Clifton E.

1996-01-01

An improvement to a coal processing system where hard materials found in the coal may cause jamming of either inflow or outflow rotary airlocks, each driven by a reversible motor. The instantaneous current used by the motor is continually monitored and compared to a predetermined value. If an overcurrent condition occurs, indicating a jamming of the airlock, a controller means starts a "soft" reverse rotation of the motor thereby clearing the jamming. Three patterns of the motor reversal are provided.

Regional Logistics Information Resources Integration Patterns and Countermeasures

NASA Astrophysics Data System (ADS)

Wu, Hui; Shangguan, Xu-ming

Effective integration of regional logistics information resources can provide collaborative services in information flow, business flow and logistics for regional logistics enterprises, which also can reduce operating costs and improve market responsiveness. First, this paper analyzes the realistic significance on the integration of regional logistics information. Second, this paper brings forward three feasible patterns on the integration of regional logistics information resources, These three models have their own strengths and the scope of application and implementation, which model is selected will depend on the specific business and the regional distribution of enterprises. Last, this paper discusses the related countermeasures on the integration of regional logistics information resources, because the integration of regional logistics information is a systems engineering, when the integration is advancing, the countermeasures should pay close attention to the current needs and long-term development of regional enterprises.

Joint optimization of logistics infrastructure investments and subsidies in a regional logistics network with CO 2 emission reduction targets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Dezhi; Zhan, Qingwen; Chen, Yuche

This study proposes an optimization model that simultaneously incorporates the selection of logistics infrastructure investments and subsidies for green transport modes to achieve specific CO 2 emission targets in a regional logistics network. The proposed model is formulated as a bi-level formulation, in which the upper level determines the optimal selection of logistics infrastructure investments and subsidies for green transport modes such that the benefit-cost ratio of the entire logistics system is maximized. The lower level describes the selected service routes of logistics users. A genetic and Frank-Wolfe hybrid algorithm is introduced to solve the proposed model. The proposed modelmore » is applied to the regional logistics network of Changsha City, China. Findings show that using the joint scheme of the selection of logistics infrastructure investments and green subsidies is more effective than using them solely. In conclusion, carbon emission reduction targets can significantly affect logistics infrastructure investments and subsidy levels.« less

Joint optimization of logistics infrastructure investments and subsidies in a regional logistics network with CO 2 emission reduction targets

DOE PAGES

Zhang, Dezhi; Zhan, Qingwen; Chen, Yuche; ...

2016-03-14

This study proposes an optimization model that simultaneously incorporates the selection of logistics infrastructure investments and subsidies for green transport modes to achieve specific CO 2 emission targets in a regional logistics network. The proposed model is formulated as a bi-level formulation, in which the upper level determines the optimal selection of logistics infrastructure investments and subsidies for green transport modes such that the benefit-cost ratio of the entire logistics system is maximized. The lower level describes the selected service routes of logistics users. A genetic and Frank-Wolfe hybrid algorithm is introduced to solve the proposed model. The proposed modelmore » is applied to the regional logistics network of Changsha City, China. Findings show that using the joint scheme of the selection of logistics infrastructure investments and green subsidies is more effective than using them solely. In conclusion, carbon emission reduction targets can significantly affect logistics infrastructure investments and subsidy levels.« less

Kinetic limitations of the Mg(2)Si system for reversible hydrogen storage.

PubMed

Kelly, Stephen T; Van Atta, Sky L; Vajo, John J; Olson, Gregory L; Clemens, B M

2009-05-20

Despite the promising thermodynamics and storage capacities of many destabilized metal hydride hydrogen storage material systems, they are often kinetically limited from achieving practical and reversible behavior. Such is the case with the Mg2Si system. We investigated the kinetic mechanisms responsible for limiting the reversibility of the MgH2+Si system using thin films as a controlled research platform. We observed that the reaction MgH2 + 1/2Mg2Si + H2 is limited by the mass transport of Mg and Si into separate phases. Hydrogen readily diffuses through the Mg2Si material and nucleating MgH2 phase growth does not result in reaction completion. By depositing and characterizing multilayer films of Mg2Si and Mg with varying Mg2Si layer thicknesses, we conclude that the hydrogenation reaction consumes no more than 1 nm of Mg2Si, making this system impractical for reversible hydrogen storage.

A novel reverse genetics system for production of infectious West Nile virus using homologous recombination in mammalian cells.

PubMed

Kobayashi, Shintaro; Yoshii, Kentaro; Hirano, Minato; Muto, Memi; Kariwa, Hiroaki

2017-02-01

Reverse genetics systems facilitate investigation of many aspects of the life cycle and pathogenesis of viruses. However, genetic instability in Escherichia coli has hampered development of a reverse genetics system for West Nile virus (WNV). In this study, we developed a novel reverse genetics system for WNV based on homologous recombination in mammalian cells. Introduction of the DNA fragment coding for the WNV structural protein together with a DNA-based replicon resulted in the release of infectious WNV. The growth rate and plaque size of the recombinant virus were almost identical to those of the parent WNV. Furthermore, chimeric WNV was produced by introducing the DNA fragment coding for the structural protein and replicon plasmid derived from various strains. Here, we report development of a novel system that will facilitate research into WNV infection. Copyright © 2016 Elsevier B.V. All rights reserved.

Prevalence of Disability and Associated Factors among Registered Leprosy Patients in All Africa Tb and Leprosy Rehabilitation and Training Centre (ALERT), Addis Ababa, Ethiopia.

PubMed

Shumet, Tigist; Demissie, Meaza; Bekele, Yonas

2015-10-01

Delay in leprosy diagnosis and treatment causes disabilities due to nerve damage, immunological reactions and bacillary infiltration. Leprosy disability leads not only to physical dysfunction and activity limitation but also disrupts social interaction of affected individuals by creating stigma and discrimination. This study was aimed at assessing leprosy disability status in patients registered at All African TB and Leprosy Rehabilitation and Training Centre. Medical records of leprosy patients registered from September 11, 2010 to September 10, 2013 G.C were reviewed. Prevalence of disability calculated, bivariate and multiple logistic regressions were used to determine crude and adjusted odds ratios with 95% confidence interval. The overall prevalence of disability was found to be 65.9% from all categories of patients (40.2% Grade I and 25.7% Grade II). The Prevalence among the new category was 62.8% (39.1% Grade 1 and 23.7% Grade 2). Those ageed above 30 years, with duration of symptoms 6-12 months and above 24 months, with sensory loss, nerve damage and reversal reaction were more likely to develop disability. In this study the prevalence of disability, both Grade I and II, is very high. Disability was associated with age, duration of symptom, sensory loss, signs of nerve damage and reversal reaction. These risk factors indicate the existence of delay in diagnosis and treatment of leprosy cases. Therefore, the national leprosy control program should investigate leprosy case detection and diagnosis system in the country and work on improving early case detection and prevention of disability.

The synthesis and the chemical and physical properties of non-aqueous silylamine solvents for carbon dioxide capture.

PubMed

Rohan, Amy L; Switzer, Jackson R; Flack, Kyle M; Hart, Ryan J; Sivaswamy, Swetha; Biddinger, Elizabeth J; Talreja, Manish; Verma, Manjusha; Faltermeier, Sean; Nielsen, Paul T; Pollet, Pamela; Schuette, George F; Eckert, Charles A; Liotta, Charles L

2012-11-01

Silylamine reversible ionic liquids were designed to achieve specific physical properties in order to address effective CO₂ capture. The reversible ionic liquid systems reported herein represent a class of switchable solvents where a relatively non-polar silylamine (molecular liquid) is reversibly transformed to a reversible ionic liquid (RevIL) by reaction with CO₂ (chemisorption). The RevILs can further capture additional CO₂ through physical absorption (physisorption). The effects of changes in structure on (1) the CO₂ capture capacity (chemisorption and physisorption), (2) the viscosity of the solvent systems at partial and total conversion to the ionic liquid state, (3) the energy required for reversing the CO₂ capture process, and (4) the ability to recycle the solvents systems are reported. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

An efficient and rapid influenza gene cloning strategy for reverse genetics system.

PubMed

Shao, Hongxia; Fan, Zhonglei; Wan, Zhimin; Tian, Xiaoyan; Chen, Hongjun; Perez, Daniel R; Qin, Aijian; Ye, Jianqiang

2015-09-15

Influenza reverse genetics plays vital roles in understanding influenza molecular characteristics and vaccine development. However, current influenza reverse genetics heavily depends on restriction enzyme and ligation for gene cloning. The traditional cloning process of influenza eight fragments for virus rescuing generally requires considerable work. To simplify and increase the pace of gene cloning for influenza reverse genetics system, we developed a rapid restriction enzyme-free ExnaseTM II-based in vitro recombination approach for influenza gene cloning. We used this strategy rapidly and successfully to clone influenza eight genes both from viruses PR8 and H9N2 for virus rescuing. Our data demonstrate that the strategy developed here can accelerate the process of influenza gene cloning into reverse genetics system, and shows high potential for applications in both influenza basic and applied research. Copyright © 2015 Elsevier B.V. All rights reserved.

Cascade Reverse Osmosis Air Conditioning System: Cascade Reverse Osmosis and the Absorption Osmosis Cycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

BEETIT Project: Battelle is developing a new air conditioning system that uses a cascade reverse osmosis (RO)-based absorption cycle. Analyses show that this new cycle can be as much as 60% more efficient than vapor compression, which is used in 90% of air conditioners. Traditional vapor-compression systems use polluting liquids for a cooling effect. Absorption cycles use benign refrigerants such as water, which is absorbed in a salt solution and pumped as liquid—replacing compression of vapor. The refrigerant is subsequently separated from absorbing salt using heat for re-use in the cooling cycle. Battelle is replacing thermal separation of refrigerant withmore » a more efficient reverse osmosis process. Research has shown that the cycle is possible, but further investment will be needed to reduce the number of cascade reverse osmosis stages and therefore cost.« less

Reversal of Glaucoma Hemifield Test Results and Visual Field Features in Glaucoma.

PubMed

Wang, Mengyu; Pasquale, Louis R; Shen, Lucy Q; Boland, Michael V; Wellik, Sarah R; De Moraes, Carlos Gustavo; Myers, Jonathan S; Wang, Hui; Baniasadi, Neda; Li, Dian; Silva, Rafaella Nascimento E; Bex, Peter J; Elze, Tobias

2018-03-01

To develop a visual field (VF) feature model to predict the reversal of glaucoma hemifield test (GHT) results to within normal limits (WNL) after 2 consecutive outside normal limits (ONL) results. Retrospective cohort study. Visual fields of 44 503 eyes from 26 130 participants. Eyes with 3 or more consecutive reliable VFs measured with the Humphrey Field Analyzer (Swedish interactive threshold algorithm standard 24-2) were included. Eyes with ONL GHT results for the 2 baseline VFs were selected. We extracted 3 categories of VF features from the baseline tests: (1) VF global indices (mean deviation [MD] and pattern standard deviation), (2) mismatch between baseline VFs, and (3) VF loss patterns (archetypes). Logistic regression was applied to predict the GHT results reversal. Cross-validation was applied to evaluate the model on testing data by the area under the receiver operating characteristic curve (AUC). We ascertained clinical glaucoma status on a patient subset (n = 97) to determine the usefulness of our model. Predictive models for GHT results reversal using VF features. For the 16 604 eyes with 2 initial ONL results, the prevalence of a subsequent WNL result increased from 0.1% for MD < -12 dB to 13.8% for MD ≥-3 dB. Compared with models with VF global indices, the AUC of predictive models increased from 0.669 (MD ≥-3 dB) and 0.697 (-6 dB ≤ MD < -3 dB) to 0.770 and 0.820, respectively, by adding VF mismatch features and computationally derived VF archetypes (P < 0.001 for both). The GHT results reversal was associated with a large mismatch between baseline VFs. Moreover, the GHT results reversal was associated more with VF archetypes of nonglaucomatous loss, severe widespread loss, and lens rim artifacts. For a subset of 97 eyes, using our model to predict absence of glaucoma based on clinical evidence after 2 ONL results yielded significantly better prediction accuracy (87.7%; P < 0.001) than predicting GHT results reversal (68.8%) with a prescribed specificity 67.7%. Using VF features may predict the GHT results reversal to WNL after 2 consecutive ONL results. Copyright © 2017 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

Reverse engineering systems models of regulation: discovery, prediction and mechanisms.

PubMed

Ashworth, Justin; Wurtmann, Elisabeth J; Baliga, Nitin S

2012-08-01

Biological systems can now be understood in comprehensive and quantitative detail using systems biology approaches. Putative genome-scale models can be built rapidly based upon biological inventories and strategic system-wide molecular measurements. Current models combine statistical associations, causative abstractions, and known molecular mechanisms to explain and predict quantitative and complex phenotypes. This top-down 'reverse engineering' approach generates useful organism-scale models despite noise and incompleteness in data and knowledge. Here we review and discuss the reverse engineering of biological systems using top-down data-driven approaches, in order to improve discovery, hypothesis generation, and the inference of biological properties. Copyright © 2011 Elsevier Ltd. All rights reserved.

Evaluation of Multi-Level Support Structure Requirements for New Weapon Systems.

DTIC Science & Technology

1987-09-01

transformer 1 total consumed manhours on this level 19.45 hrs average manhrs within 4 weeks on this level : .38 hrs average rounded number of mainten; personal ...major unit data to provide conclusions about the logistics behavior of failing weapon systems. The modeling of system behavior with CAESAR has severa-l...characteristic data and major unit data to provide conclusions about the logistics behavior of failing weapon systems. The modelling of system behavior

A Formal Approach for Milk-Run Transport Logistics

NASA Astrophysics Data System (ADS)

Satoh, Ichiro

A formal approach for specifying and reasoning about earth-friendly logistics management systems is presented. To reduce fossil fuel consumption and carbon dioxide emissions resulting from transport, we must enhance the transport efficiency of trucks, which play an essential role as carriers in modern logistics services. This paper addresses the milk-run approach. It is one of the most effective and popular solutions to this problem, but it makes it be complicated to implement in a logistics management system. We propose a language for specifying the routes of trucks and an order relation between the requirements of routes and the possible routes of trucks. The former is formulated as process calculus and the latter selects suitable trucks according to their routes.

Benchmarking transportation logistics practices for effective system planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thrower, A.W.; Dravo, A.N.; Keister, M.

2007-07-01

This paper presents preliminary findings of an Office of Civilian Radioactive Waste Management (OCRWM) benchmarking project to identify best practices for logistics enterprises. The results will help OCRWM's Office of Logistics Management (OLM) design and implement a system to move spent nuclear fuel (SNF) and high-level radioactive waste (HLW) to the Yucca Mountain repository for disposal when that facility is licensed and built. This report suggests topics for additional study. The project team looked at three Federal radioactive material logistics operations that are widely viewed to be successful: (1) the Waste Isolation Pilot Plant (WIPP) in Carlsbad, New Mexico; (2)more » the Naval Nuclear Propulsion Program (NNPP); and (3) domestic and foreign research reactor (FRR) SNF acceptance programs. (authors)« less

Exploration Mission Benefits From Logistics Reduction Technologies

NASA Technical Reports Server (NTRS)

Broyan, James Lee, Jr.; Ewert, Michael K.; Schlesinger, Thilini

2016-01-01

Technologies that reduce logistical mass, volume, and the crew time dedicated to logistics management become more important as exploration missions extend further from the Earth. Even modest reductions in logistical mass can have a significant impact because it also reduces the packaging burden. NASA's Advanced Exploration Systems' Logistics Reduction Project is developing technologies that can directly reduce the mass and volume of crew clothing and metabolic waste collection. Also, cargo bags have been developed that can be reconfigured for crew outfitting, and trash processing technologies are under development to increase habitable volume and improve protection against solar storm events. Additionally, Mars class missions are sufficiently distant that even logistics management without resupply can be problematic due to the communication time delay with Earth. Although exploration vehicles are launched with all consumables and logistics in a defined configuration, the configuration continually changes as the mission progresses. Traditionally significant ground and crew time has been required to understand the evolving configuration and to help locate misplaced items. For key mission events and unplanned contingencies, the crew will not be able to rely on the ground for logistics localization assistance. NASA has been developing a radio-frequency-identification autonomous logistics management system to reduce crew time for general inventory and enable greater crew self-response to unplanned events when a wide range of items may need to be located in a very short time period. This paper provides a status of the technologies being developed and their mission benefits for exploration missions.

76 FR 72978 - Whirlpool Corporation Including On-Site Leased Workers From Career Solutions TEC Staffing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-28

..., TEK Systems, Penske Logistics, Eurest, and Canteen, Fort Smith, AR; Amended Certification Regarding... Corporation, including on-site leased workers from Career Solutions TEC Staffing, Fort Smith, Arkansas. The... Corporation, TEK Systems, Penske Logistics, Eurest, and Canteen were employed on-site at the Fort Smith...

Combustion Light Gas Gun Technology Demonstration

DTIC Science & Technology

2007-01-23

J. G. Handbook of Cryogenic Engineering. Philadelphia: Taylor and Francis, 1998. ISBN 1-56032-332-9 Myth #2 from “Twenty Hydrogen Myths” by...the second using Helium-refrigerated reverse Brayton cycle manufactured by Linde. Neither system was designed specifically for naval applications...8 Since floor space is of a premium, the helium refrigerated reverse Brayton cycle is the system of primary current interest. The reverse Brayton

Multi-objective reverse logistics model for integrated computer waste management.

PubMed

Ahluwalia, Poonam Khanijo; Nema, Arvind K

2006-12-01

This study aimed to address the issues involved in the planning and design of a computer waste management system in an integrated manner. A decision-support tool is presented for selecting an optimum configuration of computer waste management facilities (segregation, storage, treatment/processing, reuse/recycle and disposal) and allocation of waste to these facilities. The model is based on an integer linear programming method with the objectives of minimizing environmental risk as well as cost. The issue of uncertainty in the estimated waste quantities from multiple sources is addressed using the Monte Carlo simulation technique. An illustrated example of computer waste management in Delhi, India is presented to demonstrate the usefulness of the proposed model and to study tradeoffs between cost and risk. The results of the example problem show that it is possible to reduce the environmental risk significantly by a marginal increase in the available cost. The proposed model can serve as a powerful tool to address the environmental problems associated with exponentially growing quantities of computer waste which are presently being managed using rudimentary methods of reuse, recovery and disposal by various small-scale vendors.

Virological Surveillance of Dengue in Saint Martin and Saint Barthélemy, French West Indies, Using Blood Samples on Filter Paper

PubMed Central

Matheus, Séverine; Chappert, Jean-Loup; Cassadou, Sylvie; Berger, Franck; Labeau, Bhetty; Bremand, Laetitia; Winicki, Alain; Huc-Anais, Patricia; Quenel, Philippe; Dussart, Philippe

2012-01-01

To strengthen active dengue surveillance in Saint Martin and Saint Barthélemy, two French Caribbean islands, we evaluated the epidemiological usefulness of collecting blood samples from NS1-positive dengue patients on filter paper to identify the dengue serotypes circulating in these regions during a 27-month period. This approach allowed dengue serotypes to be identified by reverse transcriptase-polymerase chain reaction in 90.1% of the total set of 666 samples analyzed and, in 95.5% of the samples collected during the acute phase of the disease. This prospective virological surveillance using blood samples absorbed onto filter paper, which were stored at 4°C and shipped at ambient temperature to a specialized laboratory for analysis, allowed us to avoid the logistic and financial costs associated with shipping frozen venous blood samples. This surveillance system offers a low-cost alternative for reinforcing dengue prevention in areas where specialized laboratories do not exist, notably by facilitating the early detection of potentially new dengue serotypes. PMID:22232467

Systems Analysis of In-Space Manufacturing Applications for the International Space Station and the Evolvable Mars Campaign

NASA Technical Reports Server (NTRS)

Owens, Andrew C.; De Weck, Olivier L.

2016-01-01

Maintenance logistics support is a significant challenge for extended human operations in space, especially for missions beyond Low Earth Orbit (LEO). For missions to Mars (such as NASA's Evolvable Mars Campaign (EMC)), where timely resupply or abort in the event of emergency will not be possible, maintenance logistics mass is directly linked to the Probability of Loss of Crew (P(LoC)), and the cost of driving down risk is an exponential increase in mass requirements. The logistics support strategies that have maintained human operations in LEO will not be effective for these deep space missions. In-Space Manufacturing (ISM) is a promising technological solution that could reduce logistics requirements, mitigate risks, and augment operational capabilities, enabling Earth- independent human spaceflight. This paper reviews maintenance logistics challenges for spaceflight operations in LEO and beyond, and presents a summary of selected results from a systems analysis of potential ISM applications for the ISS and EMC. A quantitative modeling framework and sample assessment of maintenance logistics and risk reduction potential of this new technology is also presented and discussed.

Structured Analysis of the Logistic Support Analysis (LSA) Task, and Integrated Logistic Support (ILS) Element, LSA Subtask 301.2.4.2, Reliability Centered Maintenance (RCM)

DTIC Science & Technology

1988-06-01

Di’Lt. ibu601’. I j I o; DTIC Qt.ALTTY I ,2,1 4 AMERICAN POWER JET COMPANY RIDGEFIELD, NJ FALLS CHURCH...The logic is applied to each reparable item in the system/equipment. When the components have been analyzed, an overall system/equipment analysis is...in the AMSDL as applicable to the referenced DIDs of interest. 5. Apply staff experience in logistics support analysis to assure that the intent of the

Research on JD e-commerce's delivery model

NASA Astrophysics Data System (ADS)

Fan, Zhiguo; Ma, Mengkun; Feng, Chaoying

2017-03-01

E-commerce enterprises represented by JD have made a great contribution to the economic growth and economic development of our country. Delivery, as an important part of logistics, has self-evident importance. By establishing efficient and perfect self-built logistics systems and building good cooperation models with third-party logistics enterprises, e-commerce enterprises have created their own logistics advantages. Characterized by multi-batch and small-batch, e-commerce is much more complicated than traditional transaction. It's not easy to decide which delivery model e-commerce enterprises should adopt. Having e-commerce's logistics delivery as the main research object, this essay aims to find a more suitable logistics delivery model for JD's development.

Micromagnetics and second-order reversal-curves as a route to understanding FORC diagrams of nanoparticles

NASA Astrophysics Data System (ADS)

Winklhofer, M.

2007-05-01

First-order-reversal curve (FORC) diagrams have proven useful in characterizing fine magnetic particle systems in terms of microscopic switching field distributions, characteristic interaction strengths and mean-field effects. Despite the profusion of measured FORC data, we still lack a simple, generally valid recipe for the quantitative analysis of FORC diagrams, the reason being that most samples do not act like classical linear Preisach systems, giving rise to reversible magnetization changes that tend to blur contributions from irreversible switching events. A good example illustrating the confounding influence of reversible contributions are FORC diagrams for particle systems in which vortex configurations occur as remanent states. For non-interacting Fe nanodots with well-defined grain sizes around the zero-field SD/PSD transition and random easy-axis orientation, we will show how a combination of micromagnetic modelling and second-order- reversal-curves can be used to disentangle reversible and irreversible contributions to the FORC diagram. It will also be shown that remanence-based Preisach diagrams do not fully capture the irreversible parts.

The Cyber Threat to Military Just-in-Time Logistics: Risk Mitigation and the Return to Forward Basing

DTIC Science & Technology

2017-05-26

Generation Warfare (RNGW) ......................................................4 What is Traditional Forward-Based or “Just-in- Case ” Logistics...Industrial Control Systems-Cyber Emergency Response Team IT Information Technology JFC Joint Force Commander JIC Just-in- Case JIT Just-in-Time JP Joint...aspects of demand-driven or “Just-in-Time” (JIT) logistics, and bringing back the concept of traditional large inventory or “Just-in- Case ” (JIC) logistics

49 CFR 234.237 - Reverse switch cut-out circuit.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Reverse switch cut-out circuit. 234.237 Section....237 Reverse switch cut-out circuit. A switch, when equipped with a switch circuit controller connected... warning system can only be cut out when the switch point is within one-half inch of full reverse position. ...

49 CFR 234.237 - Reverse switch cut-out circuit.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Reverse switch cut-out circuit. 234.237 Section....237 Reverse switch cut-out circuit. A switch, when equipped with a switch circuit controller connected... warning system can only be cut out when the switch point is within one-half inch of full reverse position. ...

49 CFR 234.237 - Reverse switch cut-out circuit.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Reverse switch cut-out circuit. 234.237 Section....237 Reverse switch cut-out circuit. A switch, when equipped with a switch circuit controller connected... warning system can only be cut out when the switch point is within one-half inch of full reverse position. ...

Product-to-parent reversion increases ecosystem exposure to and environmental persistence of 17α-trenbolone

NASA Astrophysics Data System (ADS)

Ward, Adam; Cwiertny, David; Kolodziej, Edward; Brehm, Colleen

2016-04-01

The product-to-parent reversion of metabolites of trenbolone acetate (TBA), a steroidal growth promoter used widely in beef cattle production, was recently observed to occur in environmental waters. The rapid forward reaction is by direct photolysis (i.e., photohydration), with the much slower reversion reaction occurring via dehydration in the dark. The objective of this study is to quantify the potential effect of this newly discovered reversible process on TBA metabolite concentrations and total bioactivity exposure in fluvial systems. Here, we demonstrate increased persistence of TBA metabolites in the stream and hyporheic zone due to the reversion process, increasing chronic and acute exposure to these endocrine-active compounds along a stream. The perpetually dark hyporheic zone is a key location for reversion in the system, ultimately providing a source of the parent compound to the stream and increasing mean in-stream concentration of 17α-trenbolone (17α-TBOH) by 40% of the input concentration under representative fluvial conditions. We demonstrate generalized cases for prediction of exposure for species with product-to-parent reversion in stream-hyporheic systems. Recognizing this risk, regulatory frameworks for compounds undergoing product-to-parent reversion will require new approaches for assessing total exposure to bioactive compounds. We discuss the role of regulating "joint" or "mixture" bioactivity as an emerging paradigm for more meaningful management of micropollutants.

Market Survey: Biological Detectors. Guide for Selection of Detection Devices and Systems

DTIC Science & Technology

2006-02-01

samples. There are no real concerns with logistical or operational concerns, as issues such as size, weight, signature, transportation , additional equipment...of the detection system or device on support and logistical systems. 2.1 Transportation Measure. Ability to transport the detection system or device...supplied, such as water, fuel, batteries, chemical, power, etc.) that have to be transported to the site for detection. 100 0-1 consumable or

Navy Technical Information Presentation System (NTIPS) Test and Implementation Strategy

DTIC Science & Technology

1981-12-01

IC AROEROCK I NAOI S ~ i P RF R M N C AVI AT OIO N A N DDEPARTMENT STIPRUCTRMNES COMPUATIONAN DEPARTMENT -MATHEMATICS AND 17 LOGISTICS DEPARTMENT leI...and Subtitle) S . TYPE OF REPORT & PERIOD COVERED NAVY TECHNICAL INFORMATION PRESENTATION Final SYSTEM (NTIPS) TEST AND IMPLEMENTATION 6. PERFORMING...CLASSIFICATION OP THIS PAGE (1nor. Data Enteed) ock 20 continued) system operation, training, maintenance, and logistics support. This system was

Reversible logic gates based on enzyme-biocatalyzed reactions and realized in flow cells: a modular approach.

PubMed

Fratto, Brian E; Katz, Evgeny

2015-05-18

Reversible logic gates, such as the double Feynman gate, Toffoli gate and Peres gate, with 3-input/3-output channels are realized using reactions biocatalyzed with enzymes and performed in flow systems. The flow devices are constructed using a modular approach, where each flow cell is modified with one enzyme that biocatalyzes one chemical reaction. The multi-step processes mimicking the reversible logic gates are organized by combining the biocatalytic cells in different networks. This work emphasizes logical but not physical reversibility of the constructed systems. Their advantages and disadvantages are discussed and potential use in biosensing systems, rather than in computing devices, is suggested. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Decision support system for the optimal location of electrical and electronic waste treatment plants: a case study in greece.

PubMed

Achillas, Ch; Vlachokostas, Ch; Moussiopoulos, Nu; Banias, G

2010-05-01

Environmentally sound end-of-life management of Electrical and Electronic Equipment has been realised as a top priority issue internationally, both due to the waste stream's continuously increasing quantities, as well as its content in valuable and also hazardous materials. In an effort to manage Waste Electrical and Electronic Equipment (WEEE), adequate infrastructure in treatment and recycling facilities is considered a prerequisite. A critical number of such plants are mandatory to be installed in order: (i) to accommodate legislative needs, (ii) decrease transportation cost, and (iii) expand reverse logistics network and cover more areas. However, WEEE recycling infrastructures require high expenditures and therefore the decision maker need to be most precautious. In this context, special care should be given on the viability of infrastructure which is heavily dependent on facilities' location. To this end, a methodology aiming towards optimal location of Units of Treatment and Recycling is developed, taking into consideration economical together with social criteria, in an effort to interlace local acceptance and financial viability. For the decision support system's needs, ELECTRE III is adopted as a multicriteria analysis technique. The methodology's applicability is demonstrated with a real-world case study in Greece. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

It's Easy To Be Wise after the Event: Concepts for Redesigning an Educational System on Logistics Derived from Reflecting Its Development and Use.

ERIC Educational Resources Information Center

Neumann, Gaby; Ziems, Dietrich; Hopner, Christian

This paper introduces a multimedia-based educational system on logistics developed at the University of Magdeburg (Germany), reports on development and implementation of the prototype, and discusses ideas for redesign. The system was tested, used, and evaluated at the university and within a European network of 24 universities, colleges, and…

Logistics Control Facility: A Normative Model for Total Asset Visibility in the Air Force Logistics System

DTIC Science & Technology

1994-09-01

IIssue Computers, information systems, and communication systems are being increasingly used in transportation, warehousing, order processing , materials...inventory levels, reduced order processing times, reduced order processing costs, and increased customer satisfaction. While purchasing and transportation...process, the speed in which crders are processed would increase significantly. Lowering the order processing time in turn lowers the lead time, which in

In-space propellant logistics. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1972-01-01

The study addresses the systems and operational problems associated with the transport, transfer, and storage of cryogenic propellants in low earth orbits. The safety problems connected with in-space propellant logistics operations are also considered.Correlation between the two projects was maintained by including safety considerations, resulting from the system safety analysis, in the trade studies and evaluations of alternate operating concepts in the systems operations analysis.

Meeting Skills Needs in a Market-Based Training System: A Study of Employer Perceptions and Responses to Training Challenges in the Australian Transport and Logistics Industry

ERIC Educational Resources Information Center

Gekara, Victor O.; Snell, Darryn; Chhetri, Prem; Manzoni, Alex

2014-01-01

Many countries are adopting market-based training systems to address industry skills needs. This paper examines the marketisation of Australia's training system and the implications for training provision and outcomes in the Transport and Logistics industry. Drawing on qualitative interviews from industry employers and training providers, we…

Nonlinear Time-Reversal in a Wave Chaotic System

NASA Astrophysics Data System (ADS)

Frazier, Matthew; Taddese, Biniyam; Ott, Edward; Antonsen, Thomas; Anlage, Steven

2012-02-01

Time reversal mirrors are particularly simple to implement in wave chaotic systems and form the basis for a new class of sensors [1-3]. These sensors work by applying the quantum mechanical concepts of Loschmidt echo and fidelity decay to classical waves. The sensors make explicit use of time-reversal invariance and spatial reciprocity in a wave chaotic system to remotely measure the presence of small perturbations to the system. The underlying ray chaos increases the sensitivity to small perturbations throughout the volume explored by the waves. We extend our time-reversal mirror to include a discrete element with a nonlinear dynamical response. The initially injected pulse interacts with the nonlinear element, generating new frequency components originating at the element. By selectively filtering for and applying the time-reversal mirror to the new frequency components, we focus a pulse only onto the element, without knowledge of its location. Furthermore, we demonstrate transmission of arbitrary patterns of pulses to the element, creating a targeted communication channel to the exclusion of 'eavesdroppers' at other locations in the system. [1] Appl. Phys. Lett. 95, 114103 (2009) [2] J. Appl. Phys. 108, 1 (2010) [3] Acta Physica Polonica A 112, 569 (2007)

A history of reverse total shoulder arthroplasty.

PubMed

Flatow, Evan L; Harrison, Alicia K

2011-09-01

Management of the cuff-deficient arthritic shoulder has long been challenging. Early unconstrained shoulder arthroplasty systems were associated with high complication and implant failure rates. The evolution toward the modern reverse shoulder arthroplasty includes many variables of constrained shoulder arthroplasty designs. This review explores the development of reverse shoulder arthroplasty, specifically describing (1) the evolution of reverse shoulder arthroplasty designs, (2) the biomechanical variations in the evolution of this arthroplasty, and (3) the current issues relevant to reverse shoulder arthroplasty today. Using a PubMed search, the literature was explored for articles addressing reverse shoulder arthroplasty, focusing on those papers with historical context. Results of the early designs were apparently poor, although they were not subjected to rigorous clinical research and usually reported only in secondary literature. We identified a trend of glenoid component failure in the early reverse designs. This trend was recognized and reported by authors as the reverse shoulder evolved. Authors reported greater pain relief and better function in reverse shoulder arthroplasty with the fundamental change of Grammont's design (moving the center of rotation medially and distally). However, current reports suggest lingering concerns and challenges with today's designs. The history of reverse shoulder arthroplasty involves the designs of many forward-thinking surgeons. Many of these highly constrained systems failed, although more recent designs have demonstrated improved longevity and implant performance. Reverse shoulder arthroplasty requires ongoing study, with challenges and controversies remaining around present-day designs.

Is perpendicular magnetic anisotropy essential to all-optical ultrafast spin reversal in ferromagnets?

NASA Astrophysics Data System (ADS)

Zhang, G. P.; Bai, Y. H.; George, Thomas F.

2017-10-01

All-optical spin reversal presents a new opportunity for spin manipulations, free of a magnetic field. Most of all-optical-spin-reversal ferromagnets are found to have a perpendicular magnetic anisotropy (PMA), but it has been unknown whether PMA is necessary for spin reversal. Here we theoretically investigate magnetic thin films with either PMA or in-plane magnetic anisotropy (IMA). Our results show that spin reversal in IMA systems is possible, but only with a longer laser pulse and within a narrow laser parameter region. Spin reversal does not show a strong helicity dependence where the left- and right-circularly polarized light lead to the identical results. By contrast, the spin reversal in PMA systems is robust, provided both the spin angular momentum and laser field are strong enough while the magnetic anisotropy itself is not too strong. This explains why experimentally the majority of all-optical spin-reversal samples are found to have strong PMA and why spins in Fe nanoparticles only cant out of plane. It is the laser-induced spin-orbit torque that plays a key role in the spin reversal. Surprisingly, the same spin-orbit torque results in laser-induced spin rectification in spin-mixed configuration, a prediction that can be tested experimentally. Our results clearly point out that PMA is essential to spin reversal, though there is an opportunity for in-plane spin reversal.

Extending the boundaries of reverse engineering

NASA Astrophysics Data System (ADS)

Lawrie, Chris

2002-04-01

In today's market place the potential of Reverse Engineering as a time compression tool is commonly lost under its traditional definition. The term Reverse Engineering was coined way back at the advent of CMM machines and 3D CAD systems to describe the process of fitting surfaces to captured point data. Since these early beginnings, downstream hardware scanning and digitising systems have evolved in parallel with an upstream demand, greatly increasing the potential of a point cloud data set within engineering design and manufacturing processes. The paper will discuss the issues surrounding Reverse Engineering at the turn of the millennium.

RNA Virus Reverse Genetics and Vaccine Design

PubMed Central

Stobart, Christopher C.; Moore, Martin L.

2014-01-01

RNA viruses are capable of rapid spread and severe or potentially lethal disease in both animals and humans. The development of reverse genetics systems for manipulation and study of RNA virus genomes has provided platforms for designing and optimizing viral mutants for vaccine development. Here, we review the impact of RNA virus reverse genetics systems on past and current efforts to design effective and safe viral therapeutics and vaccines. PMID:24967693

Next Generation Polar Seismic Instrumentation Challenges

NASA Astrophysics Data System (ADS)

Parker, T.; Beaudoin, B. C.; Gridley, J.; Anderson, K. R.

2011-12-01

Polar region logistics are the limiting factor for deploying deep field seismic arrays. The IRIS PASSCAL Instrument Center, in collaboration with UNAVCO, designed and deployed several systems that address some of the logistical constraints of polar deployments. However, continued logistics' pressures coupled with increasingly ambitious science projects require further reducing the logistics required for deploying both summer and over winter stations. Our focus is to reduce station power requirements and bulk, thereby minimizing the time and effort required to deploy these arrays. We will reduce the weight of the battery bank by incorporating the most applicable new high energy-density battery technology. Using these batteries will require a completely new power management system along with an appropriate smart enclosure. The other aspect will be to integrate the digitizing system with the sensor. Both of these technologies should reduce the install time and shipping volume plus weight while reducing some instrument costs. We will also continue work on an effective Iridium telemetry solution for automated data return. The costs and limitations of polar deep-field science easily justifies a specialized development effort but pays off doubly in that we will continue to leverage the advancements in reduced logistics and increased performance for the benefit of low-latitude seismic research.

[Influences of environmental factors and interaction of several chemokines gene-environmental on systemic lupus erythematosus].

PubMed

Ye, Dong-qing; Hu, Yi-song; Li, Xiang-pei; Huang, Fen; Yang, Shi-gui; Hao, Jia-hu; Yin, Jing; Zhang, Guo-qing; Liu, Hui-hui

2004-11-01

To explore the impact of environmental factors, daily lifestyle, psycho-social factors and the interactions between environmental factors and chemokines genes on systemic lupus erythematosus (SLE). Case-control study was carried out and environmental factors for SLE were analyzed by univariate and multivariate unconditional logistic regression. Interactions between environmental factors and chemokines polymorphism contributing to systemic lupus erythematosus were also analyzed by logistic regression model. There were nineteen factors associated with SLE when univariate unconditional logistic regression was used. However, when multivariate unconditional logistic regression was used, only five factors showed having impacts on the disease, in which drinking well water (OR=0.099) was protective factor for SLE, and multiple drug allergy (OR=8.174), over-exposure to sunshine (OR=18.339), taking antibiotics (OR=9.630) and oral contraceptives were risk factors for SLE. When unconditional logistic regression model was used, results showed that there was interaction between eating irritable food and -2518MCP-1G/G genotype (OR=4.387). No interaction between environmental factors was found that contributing to SLE in this study. Many environmental factors were related to SLE, and there was an interaction between -2518MCP-1G/G genotype and eating irritable food.

NASA Space Rocket Logistics Challenges

NASA Technical Reports Server (NTRS)

Neeley, James R.; Jones, James V.; Watson, Michael D.; Bramon, Christopher J.; Inman, Sharon K.; Tuttle, Loraine

2014-01-01

The Space Launch System (SLS) is the new NASA heavy lift launch vehicle and is scheduled for its first mission in 2017. The goal of the first mission, which will be uncrewed, is to demonstrate the integrated system performance of the SLS rocket and spacecraft before a crewed flight in 2021. SLS has many of the same logistics challenges as any other large scale program. Common logistics concerns for SLS include integration of discreet programs geographically separated, multiple prime contractors with distinct and different goals, schedule pressures and funding constraints. However, SLS also faces unique challenges. The new program is a confluence of new hardware and heritage, with heritage hardware constituting seventy-five percent of the program. This unique approach to design makes logistics concerns such as commonality especially problematic. Additionally, a very low manifest rate of one flight every four years makes logistics comparatively expensive. That, along with the SLS architecture being developed using a block upgrade evolutionary approach, exacerbates long-range planning for supportability considerations. These common and unique logistics challenges must be clearly identified and tackled to allow SLS to have a successful program. This paper will address the common and unique challenges facing the SLS programs, along with the analysis and decisions the NASA Logistics engineers are making to mitigate the threats posed by each.

48 CFR 217.172 - Multiyear contracts for supplies.

Code of Federal Regulations, 2012 CFR

2012-10-01

... contract for— (1) A weapon system and associated items, services, and logistics support for a weapon system... after the completion of a cost analysis performed by the Defense Cost and Resource Center of the... Logistics (10 U.S.C. 2306b(i)(6)). (7) The Secretary of Defense shall send a notification containing the...

48 CFR 217.172 - Multiyear contracts for supplies.

Code of Federal Regulations, 2014 CFR

2014-10-01

... contract for— (1) A weapon system and associated items, services, and logistics support for a weapon system... after the completion of a cost analysis performed by the Defense Cost and Resource Center of the... Logistics (10 U.S.C. 2306b(i)(6)). (7) The Secretary of Defense shall send a notification containing the...

48 CFR 217.172 - Multiyear contracts for supplies.

Code of Federal Regulations, 2011 CFR

2011-10-01

... contract for— (1) A weapon system and associated items, services, and logistics support for a weapon system... after the completion of a cost analysis performed by the Defense Cost and Resource Center of the... Logistics (10 U.S.C. 2306b(i)(6)). (7) The Secretary of Defense shall send a notification containing the...

48 CFR 217.172 - Multiyear contracts for supplies.

Code of Federal Regulations, 2013 CFR

2013-10-01

... contract for— (1) A weapon system and associated items, services, and logistics support for a weapon system... after the completion of a cost analysis performed by the Defense Cost and Resource Center of the... Logistics (10 U.S.C. 2306b(i)(6)). (7) The Secretary of Defense shall send a notification containing the...

Using Students' Knowledge to Generate Individual Feedback: Concept for an Intelligent Educational System on Logistics.

ERIC Educational Resources Information Center

Ziems, Dietrich; Neumann, Gaby

1997-01-01

Discusses a methods kit for interactive problem-solving exercises in engineering education as well as a methodology for intelligent evaluation of solutions. The quality of a system teaching logistics thinking can be improved using artificial intelligence. Embedding a rule-based diagnosis module that evaluates the student's knowledge actively…

Global Spent Fuel Logistics Systems Study (GSFLS). Volume 2A. GSFLS visit findings (appendix). Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1978-01-31

This appendix is a part of the interim report documentation for the Global Spent Fuel Logistics System (GSFLS) study. This appendix provides the legal/regulatory reference material, supportive of Volume 2 - GSFLS Visit Finding and Evaluations; and certain background material on British Nuclear Fuel Limited (BNFL).

Visualizing the Logistic Map with a Microcontroller

ERIC Educational Resources Information Center

Serna, Juan D.; Joshi, Amitabh

2012-01-01

The logistic map is one of the simplest nonlinear dynamical systems that clearly exhibits the route to chaos. In this paper, we explore the evolution of the logistic map using an open-source microcontroller connected to an array of light-emitting diodes (LEDs). We divide the one-dimensional domain interval [0,1] into ten equal parts, an associate…

32 CFR Appendix A to Part 323 - Instructions for Preparation of System Notices

Code of Federal Regulations, 2011 CFR

2011-07-01

... DEFENSE (CONTINUED) PRIVACY PROGRAM DEFENSE LOGISTICS AGENCY PRIVACY PROGRAM Pt. 323, App. A Appendix A to... Copies may be obtained from the Defense Logistics Agency, ATTN: DSS-CV, 8725 John J. Kingman Road, Suite... Secretary of Defense has issued DoD Directive 5105.22 (32 CFR part 398), Defense Logistics Agency (DLA), the...

32 CFR Appendix A to Part 323 - Instructions for Preparation of System Notices

Code of Federal Regulations, 2012 CFR

2012-07-01

... DEFENSE (CONTINUED) PRIVACY PROGRAM DEFENSE LOGISTICS AGENCY PRIVACY PROGRAM Pt. 323, App. A Appendix A to... Copies may be obtained from the Defense Logistics Agency, ATTN: DSS-CV, 8725 John J. Kingman Road, Suite... Secretary of Defense has issued DoD Directive 5105.22 (32 CFR part 398), Defense Logistics Agency (DLA), the...

32 CFR Appendix A to Part 323 - Instructions for Preparation of System Notices

Code of Federal Regulations, 2010 CFR

2010-07-01

... DEFENSE (CONTINUED) PRIVACY PROGRAM DEFENSE LOGISTICS AGENCY PRIVACY PROGRAM Pt. 323, App. A Appendix A to... Copies may be obtained from the Defense Logistics Agency, ATTN: DSS-CV, 8725 John J. Kingman Road, Suite... Secretary of Defense has issued DoD Directive 5105.22 (32 CFR part 398), Defense Logistics Agency (DLA), the...

STUDY OF MANAGEMENT EDUCATION AND TRAINING WITHIN THE DEPARTMENT OF DEFENSE. PART V: SHORT LOGISTICS COURSES TASK GROUP REPORT,

DTIC Science & Technology

are under consideration by other task groups. These courses were examined in considerable depth. The schools are the Army Logistics Management Center...is still small. There is no comprehensive system to determine the needs for training and to insure that the total program of logistics management education

Gene-Gene Combination Effect and Interactions among ABCA1, APOA1, SR-B1, and CETP Polymorphisms for Serum High-Density Lipoprotein-Cholesterol in the Japanese Population

PubMed Central

Nakamura, Akihiko; Niimura, Hideshi; Kuwabara, Kazuyo; Takezaki, Toshiro; Morita, Emi; Wakai, Kenji; Hamajima, Nobuyuki; Nishida, Yuichiro; Turin, Tanvir Chowdhury; Suzuki, Sadao; Ohnaka, Keizo; Uemura, Hirokazu; Ozaki, Etsuko; Hosono, Satoyo; Mikami, Haruo; Kubo, Michiaki; Tanaka, Hideo

2013-01-01

Background/Objective Gene-gene interactions in the reverse cholesterol transport system for high-density lipoprotein-cholesterol (HDL-C) are poorly understood. The present study observed gene-gene combination effect and interactions between single nucleotide polymorphisms (SNPs) in ABCA1, APOA1, SR-B1, and CETP in serum HDL-C from a cross-sectional study in the Japanese population. Methods The study population comprised 1,535 men and 1,515 women aged 35–69 years who were enrolled in the Japan Multi-Institutional Collaborative Cohort (J-MICC) Study. We selected 13 SNPs in the ABCA1, APOA1, CETP, and SR-B1 genes in the reverse cholesterol transport system. The effects of genetic and environmental factors were assessed using general linear and logistic regression models after adjusting for age, sex, and region. Principal Findings Alcohol consumption and daily activity were positively associated with HDL-C levels, whereas smoking had a negative relationship. The T allele of CETP, rs3764261, was correlated with higher HDL-C levels and had the highest coefficient (2.93 mg/dL/allele) among the 13 SNPs, which was statistically significant after applying the Bonferroni correction (p<0.001). Gene-gene combination analysis revealed that CETP rs3764261 was associated with high HDL-C levels with any combination of SNPs from ABCA1, APOA1, and SR-B1, although no gene-gene interaction was apparent. An increasing trend for serum HDL-C was also observed with an increasing number of alleles (p<0.001). Conclusions The present study identified a multiplier effect from a polymorphism in CETP with ABCA1, APOA1, and SR-B1, as well as a dose-dependence according to the number of alleles present. PMID:24376512

Ultrafast Reverse Recovery Time Measurement for Wide-Bandgap Diodes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mauch, Daniel L.; Zutavern, Fred J.; Delhotal, Jarod J.

A system is presented that is capable of measuring sub-nanosecond reverse recovery times of diodes in wide-bandgap materials over a wide range of forward biases (0 – 1 A) and reverse voltages (0 – 10 kV). The system utilizes the step recovery technique and comprises a cable pulser based on a silicon (Si) Photoconductive Semiconductor Switch (PCSS) triggered with an Ultra Short Pulse Laser (USPL), a pulse charging circuit, a diode biasing circuit, and resistive and capacitive voltage monitors. The PCSS based cable pulser transmits a 130 ps rise time pulse down a transmission line to a capacitively coupled diode,more » which acts as the terminating element of the transmission line. The temporal nature of the pulse reflected by the diode provides the reverse recovery characteristics of the diode, measured with a high bandwidth capacitive probe integrated into the cable pulser. Furthermore, this system was used to measure the reverse recovery times (including the creation and charging of the depletion region) for two Avogy gallium nitride (GaN) diodes; the initial reverse recovery time was found to be 4 ns and varied minimally over reverse biases of 50 – 100 V and forward current of 1 – 100 mA.« less

Ultrafast Reverse Recovery Time Measurement for Wide-Bandgap Diodes

DOE PAGES

Mauch, Daniel L.; Zutavern, Fred J.; Delhotal, Jarod J.; ...

2017-03-01

A system is presented that is capable of measuring sub-nanosecond reverse recovery times of diodes in wide-bandgap materials over a wide range of forward biases (0 – 1 A) and reverse voltages (0 – 10 kV). The system utilizes the step recovery technique and comprises a cable pulser based on a silicon (Si) Photoconductive Semiconductor Switch (PCSS) triggered with an Ultra Short Pulse Laser (USPL), a pulse charging circuit, a diode biasing circuit, and resistive and capacitive voltage monitors. The PCSS based cable pulser transmits a 130 ps rise time pulse down a transmission line to a capacitively coupled diode,more » which acts as the terminating element of the transmission line. The temporal nature of the pulse reflected by the diode provides the reverse recovery characteristics of the diode, measured with a high bandwidth capacitive probe integrated into the cable pulser. Furthermore, this system was used to measure the reverse recovery times (including the creation and charging of the depletion region) for two Avogy gallium nitride (GaN) diodes; the initial reverse recovery time was found to be 4 ns and varied minimally over reverse biases of 50 – 100 V and forward current of 1 – 100 mA.« less

Building Combat Strength through Logistics: Translating the New Air Force Logistics Concept of Operations into Action

DTIC Science & Technology

1988-03-31

MARCI 1988 iAm U m WI 4EUnclT CLSIIAION OF THIS PAGE REPORT DOCUMENTATION PAGE is REPORT SECURITY CLASSIFICATION lb. RESTRICTIVE MARKINGS 2.. SECUR ...logistics system of the future more capable of supporting the full spectrumn of war 20 OISTRIaSUTION.’AVAILAeILiTY 0" ABSTRACT 21 ABSTRACT SECURITY ... SECURITY CLASSIFICATION OT: THIS PAGF Unclas ’SCUFUTY Cý= I!FICATION OF THIS PAGE 1,Qwcont.) scenarios. Today’s logistics processes assume wartime

Reverse osmosis water purification system

NASA Technical Reports Server (NTRS)

Ahlstrom, H. G.; Hames, P. S.; Menninger, F. J.

1986-01-01

A reverse osmosis water purification system, which uses a programmable controller (PC) as the control system, was designed and built to maintain the cleanliness and level of water for various systems of a 64-m antenna. The installation operates with other equipment of the antenna at the Goldstone Deep Space Communication Complex. The reverse osmosis system was designed to be fully automatic; with the PC, many complex sequential and timed logic networks were easily implemented and are modified. The PC monitors water levels, pressures, flows, control panel requests, and set points on analog meters; with this information various processes are initiated, monitored, modified, halted, or eliminated as required by the equipment being supplied pure water.

Development of a Logistics Support Framework for Defense Mapping Agency (DMA) Automated Systems

DTIC Science & Technology

1990-09-01

cycle of a particular system. This research identified principles of management , design or system life cycle processes, and ILS elements needed to...Delphi results gathered from DMA expert opinions. The principles of management , depicted in the Logistics Systems Management Matrix (LSMM) portrayed...review were used to form the Delphi survey questions in Chapter III. As shown in Figure 2, the LSMM is a three-dimensional model with thp principles of management on

Time reversal communication system

DOEpatents

Candy, James V.; Meyer, Alan W.

2008-12-02

A system of transmitting a signal through a channel medium comprises digitizing the signal, time-reversing the digitized signal, and transmitting the signal through the channel medium. The channel medium may be air, earth, water, tissue, metal, and/or non-metal.

Reversing the Landauer's erasure: Single-electron Maxwell's demon operating at the limit of thermodynamic efficiency

NASA Astrophysics Data System (ADS)

Averin, Dmitri V.; Pekola, Jukka P.

2017-03-01

According to Landauer's principle, erasure of information is the only part of a computation process that unavoidably involves energy dissipation. If done reversibly, such an erasure generates the minimal heat of $k_BT\\ln 2$ per erased bit of information. The goal of this work is to discuss the actual reversal of the optimal erasure which can serve as the basis for the Maxwell's demon operating with ultimate thermodynamic efficiency as dictated by the second law of thermodynamics. The demon extracts $k_BT\\ln 2$ of heat from an equilibrium reservoir at temperature $T$ per one bit of information obtained about the measured system used by the demon. We have analyzed this Maxwell's demon in the situation when it uses a general quantum system with a discrete spectrum of energy levels as its working body. In the case of the effectively two-level system, which has been realized experimentally based on tunneling of individual electron in a single-electron box [J.V. Koski et al., PNAS 111, 13786 (2014)], we also studied and minimized corrections to the ideal reversible operation of the demon. These corrections include, in particular, the non-adiabatic terms which are described by a version of the classical fluctuation-dissipation theorem. The overall reversibility of the Maxwell's demon requires, beside the reversibility of the intrinsic working body dynamics, the reversibility of the measurement and feedback processes. The single-electron demon can, in principle, be made fully reversible by developing a thermodynamically reversible single-electron charge detector for measurements of the individual charge states of the single-electron box.

A Novel Multi-Sensor Environmental Perception Method Using Low-Rank Representation and a Particle Filter for Vehicle Reversing Safety

PubMed Central

Zhang, Zutao; Li, Yanjun; Wang, Fubing; Meng, Guanjun; Salman, Waleed; Saleem, Layth; Zhang, Xiaoliang; Wang, Chunbai; Hu, Guangdi; Liu, Yugang

2016-01-01

Environmental perception and information processing are two key steps of active safety for vehicle reversing. Single-sensor environmental perception cannot meet the need for vehicle reversing safety due to its low reliability. In this paper, we present a novel multi-sensor environmental perception method using low-rank representation and a particle filter for vehicle reversing safety. The proposed system consists of four main steps, namely multi-sensor environmental perception, information fusion, target recognition and tracking using low-rank representation and a particle filter, and vehicle reversing speed control modules. First of all, the multi-sensor environmental perception module, based on a binocular-camera system and ultrasonic range finders, obtains the distance data for obstacles behind the vehicle when the vehicle is reversing. Secondly, the information fusion algorithm using an adaptive Kalman filter is used to process the data obtained with the multi-sensor environmental perception module, which greatly improves the robustness of the sensors. Then the framework of a particle filter and low-rank representation is used to track the main obstacles. The low-rank representation is used to optimize an objective particle template that has the smallest L-1 norm. Finally, the electronic throttle opening and automatic braking is under control of the proposed vehicle reversing control strategy prior to any potential collisions, making the reversing control safer and more reliable. The final system simulation and practical testing results demonstrate the validity of the proposed multi-sensor environmental perception method using low-rank representation and a particle filter for vehicle reversing safety. PMID:27294931

A Novel Multi-Sensor Environmental Perception Method Using Low-Rank Representation and a Particle Filter for Vehicle Reversing Safety.

PubMed

Zhang, Zutao; Li, Yanjun; Wang, Fubing; Meng, Guanjun; Salman, Waleed; Saleem, Layth; Zhang, Xiaoliang; Wang, Chunbai; Hu, Guangdi; Liu, Yugang

2016-06-09

Environmental perception and information processing are two key steps of active safety for vehicle reversing. Single-sensor environmental perception cannot meet the need for vehicle reversing safety due to its low reliability. In this paper, we present a novel multi-sensor environmental perception method using low-rank representation and a particle filter for vehicle reversing safety. The proposed system consists of four main steps, namely multi-sensor environmental perception, information fusion, target recognition and tracking using low-rank representation and a particle filter, and vehicle reversing speed control modules. First of all, the multi-sensor environmental perception module, based on a binocular-camera system and ultrasonic range finders, obtains the distance data for obstacles behind the vehicle when the vehicle is reversing. Secondly, the information fusion algorithm using an adaptive Kalman filter is used to process the data obtained with the multi-sensor environmental perception module, which greatly improves the robustness of the sensors. Then the framework of a particle filter and low-rank representation is used to track the main obstacles. The low-rank representation is used to optimize an objective particle template that has the smallest L-1 norm. Finally, the electronic throttle opening and automatic braking is under control of the proposed vehicle reversing control strategy prior to any potential collisions, making the reversing control safer and more reliable. The final system simulation and practical testing results demonstrate the validity of the proposed multi-sensor environmental perception method using low-rank representation and a particle filter for vehicle reversing safety.

41 CFR 101-30.303 - Responsibility.

Code of Federal Regulations, 2014 CFR

2014-07-01

... direct to the Defense Logistics Services Center (DLSC) in conformance with procedures set forth in the... cataloging activity designated to receive requests are in the GSA Handbook, Federal Catalog System-Logistics...

41 CFR 101-30.303 - Responsibility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... direct to the Defense Logistics Services Center (DLSC) in conformance with procedures set forth in the... cataloging activity designated to receive requests are in the GSA Handbook, Federal Catalog System-Logistics...

41 CFR 101-30.303 - Responsibility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... direct to the Defense Logistics Services Center (DLSC) in conformance with procedures set forth in the... cataloging activity designated to receive requests are in the GSA Handbook, Federal Catalog System-Logistics...

Development and application of screening tools for biodegradation in water-sediment systems and soil.

PubMed

Junker, Thomas; Coors, Anja; Schüürmann, Gerrit

2016-02-15

Two new screening-test systems for biodegradation in water-sediment systems (WSST; Water-Sediment Screening Tool) and soil (SST; Soil Screening Tool) were developed in analogy with the water-only test system OECD 301C (MITI-test). The test systems could be applied successfully to determine reproducible experimental mineralization rates and kinetics on the screening-test level for fifteen organic chemicals in water (MITI), water-sediment (WSST) and soil (SST). Substance-specific differences were observed for mineralization compared among the three test systems. Based on mineralization rate and mineralization half-life, the fifteen compounds could be grouped into four biodegradation categories: substances with high mineralization and a half-life <28 days in (1) all three test systems, (2) only in the MITI test and in the WSST, (3) only in the SST, and (4) none of the test systems. The observed differences between the MITI results and the WSST and SST biodegradation rates of the compounds do not reflect their (reversible) sorption into organic matter in terms of experimental K(oc) values and log D values for the relevant pH range. Regarding mineralization kinetics we recommend to determine the lag-phase, mineralization half-life and mineralization rate using a 5-parameter logistic regression for degradation curves with and without lag-phase. Experimental data obtained with the WSST and the SST could be verified by showing good agreement with biodegradation data from databases and literature for the majority of compounds tested. Thus, these new screening-tools for water-sediment and soil are considered suitable to determine sound and reliable quantitative mineralization data including mineralization kinetics in addition to the water-only ready biodegradability tests according to OECD 301. Copyright © 2015 Elsevier B.V. All rights reserved.

An extension of trust and TAM model with IDT in the adoption of the electronic logistics information system in HIS in the medical industry.

PubMed

Tung, Feng-Cheng; Chang, Su-Chao; Chou, Chi-Min

2008-05-01

Ever since National Health Insurance was introduced in 1995, the number of insurants increased to over 96% from 50 to 60%, with a continuous satisfaction rating of about 70%. However, the premium accounted for 5.77% of GDP in 2001 and the Bureau of National Health Insurance had pressing financial difficulties, so it reformed its expenditure systems, such as fee for service, capitation, case payment and the global budget system in order to control the rising medical costs. Since the change in health insurance policy, most hospitals attempted to reduce their operating expenses and improve efficiency. Introducing the electronic logistics information system is one way of reducing the cost of the department of central warehouse and the nursing stations. Hence, the study proposes a technology acceptance research model and examines how nurses' acceptance of the e-logistics information system has been affected in the medical industry. This research combines innovation diffusion theory, technology acceptance model and added two research parameters, trust and perceived financial cost to propose a new hybrid technology acceptance model. Taking Taiwan's medical industry as an experimental example, this paper studies nurses' acceptance of the electronic logistics information system. The structural equation modeling technique was used to evaluate the causal model and confirmatory factor analysis was performed to examine the reliability and validity of the measurement model. The results of the survey strongly support the new hybrid technology acceptance model in predicting nurses' intention to use the electronic logistics information system. The study shows that 'compatibility', 'perceived usefulness', 'perceived ease of use', and 'trust' all have great positive influence on 'behavioral intention to use'. On the other hand 'perceived financial cost' has great negative influence on behavioral intention to use.

Science of Test Research Consortium: Year Two Final Report

DTIC Science & Technology

2012-10-02

July 2012. Analysis of an Intervention for Small Unmanned Aerial System ( SUAS ) Accidents, submitted to Quality Engineering, LQEN-2012-0056. Stone... Systems Engineering. Wolf, S. E., R. R. Hill, and J. J. Pignatiello. June 2012. Using Neural Networks and Logistic Regression to Model Small Unmanned ...Human Retina. 6. Wolf, S. E. March 2012. Modeling Small Unmanned Aerial System Mishaps using Logistic Regression and Artificial Neural Networks. 7

Logistics or patient care: which features do independent Finnish pharmacy owners prioritize in a strategic plan for future information technology systems?

PubMed

Westerling, Anna M; Haikala, Veikko E; Bell, J Simon; Airaksinen, Marja S

2010-01-01

To determine Finnish community pharmacy owners' requirements for the next generation of software systems. Descriptive, nonexperimental, cross-sectional study. Finland during December 2006. 308 independent pharmacy owners. Survey listing 126 features that could potentially be included in the new information technology (IT) system. The list was grouped into five categories: (1) drug information and patient counseling, (2) medication safety, (3) interprofessional collaboration, (4) pharmacy services, and (5) pharmacy internal processes. Perceived value of potential features for a new IT system. The survey was mailed to all independent pharmacy owners in Finland (n = 580; response rate 53% [n = 308]). Respondents gave priority to logistical functions and functions related to drug information and patient care. The highest rated individual features were tracking product expiry (rated as very or quite important by 100% of respondents), computerized drug-drug interaction screening (99%), an electronic version of the national pharmaceutical reference book (97%), and a checklist-type drug information database to assist patient counseling (95%). In addition to the high ranking for logistical features, Finnish pharmacy owners put a priority on support for cognitive pharmaceutical services in the next IT system. Although the importance of logistical functions is understandable, the owners demonstrated a commitment to strategic health policy goals when planning their business IT system.

Integrated Logistics Support approach: concept for the new big projects: E-ELT, SKA, CTA

NASA Astrophysics Data System (ADS)

Marchiori, G.; Rampini, F.; Formentin, F.

2014-08-01

The Integrated Logistic Support is a process supporting strategies and optimizing activities for a correct project management and system engineering development. From the design & engineering of complex technical systems, to the erection on site, acceptance and after-sales service, EIE GROUP covers all aspects of the Integrated Logistics Support (ILS) process that includes: costing process centered around the life cycle cost and Level of Repair Analyses; engineering process which influences the design via means of reliability, modularization, etc.; technical publishing process based on international specifications; ordering administration process for supply support. Through the ILS, EIE GROUP plans and directs the identification and development of logistics support and system requirements for its products, with the goal of creating systems that last longer and require less support, thereby reducing costs and increasing return on investments. ILS therefore, addresses these aspects of supportability not only during acquisition, but also throughout the operational life cycle of the system. The impact of the ILS is often measured in terms of metrics such as reliability, availability, maintainability and testability (RAMT), and System Safety (RAMS). Example of the criteria and approach adopted by EIE GROUP during the design, manufacturing and test of the ALMA European Antennas and during the design phase of the E-ELT telescope and Dome are presented.

Optimal design of reverse osmosis module networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maskan, F.; Wiley, D.E.; Johnston, L.P.M.

2000-05-01

The structure of individual reverse osmosis modules, the configuration of the module network, and the operating conditions were optimized for seawater and brackish water desalination. The system model included simple mathematical equations to predict the performance of the reverse osmosis modules. The optimization problem was formulated as a constrained multivariable nonlinear optimization. The objective function was the annual profit for the system, consisting of the profit obtained from the permeate, capital cost for the process units, and operating costs associated with energy consumption and maintenance. Optimization of several dual-stage reverse osmosis systems were investigated and compared. It was found thatmore » optimal network designs are the ones that produce the most permeate. It may be possible to achieve economic improvements by refining current membrane module designs and their operating pressures.« less

A reverse engineering algorithm for neural networks, applied to the subthalamopallidal network of basal ganglia.

PubMed

Floares, Alexandru George

2008-01-01

Modeling neural networks with ordinary differential equations systems is a sensible approach, but also very difficult. This paper describes a new algorithm based on linear genetic programming which can be used to reverse engineer neural networks. The RODES algorithm automatically discovers the structure of the network, including neural connections, their signs and strengths, estimates its parameters, and can even be used to identify the biophysical mechanisms involved. The algorithm is tested on simulated time series data, generated using a realistic model of the subthalamopallidal network of basal ganglia. The resulting ODE system is highly accurate, and results are obtained in a matter of minutes. This is because the problem of reverse engineering a system of coupled differential equations is reduced to one of reverse engineering individual algebraic equations. The algorithm allows the incorporation of common domain knowledge to restrict the solution space. To our knowledge, this is the first time a realistic reverse engineering algorithm based on linear genetic programming has been applied to neural networks.

[Pharmaceutical logistic in turnover of pharmaceutical products of Azerbaijan].

PubMed

Dzhalilova, K I

2009-11-01

Development of pharmaceutical logistic system model promotes optimal strategy for pharmaceutical functioning. The goal of such systems is organization of pharmaceutical product's turnover in required quantity and assortment, at preset time and place, at a highest possible degree of consumption readiness with minimal expenses and qualitative service. Organization of the optimal turnover chain in the region is offered to start from approximate classification of medicaments by logistic characteristics. Supplier selection was performed by evaluation of timeliness of delivery, quality of delivered products (according to the minimum acceptable level of quality) and time-keeping of time spending for orders delivery.

Structured Analysis for the Logistic Support Analysis (LSA) Task and the Integrated Logistic Support (ILS) Element. Structured Analysis - ILS Assessment Element E11. Design Influence

DTIC Science & Technology

1989-01-01

format size of this report, the full identifying entry may well be forcibly shortened, thereby introducing the possibility of misunderstanding. Therefore...OF MATERIEL" 3d . "AR 570-9, "MANPOWER AND EQUIPMENT CONTROL - HOST NATION SUPPORT" 2. AR 700-9, "POLICIES OF THE ARMY LOGISTIC SYSTEM" 3. AR 700-82...PERSONNEL 4. TRAINING 5. SYSTEM SAFETY 6. HEALTH HAZARDS. TEE ASSESSMENT Or MANPRINT INFLUENCE ON DESIGNS IS ADDRESSED IN SIX (6) SPECIFIC AREAS IN

California Family Planning Health Care Providers' Challenges to Same-Day Long-Acting Reversible Contraception Provision.

PubMed

Biggs, M Antonia; Harper, Cynthia C; Brindis, Claire D

2015-08-01

To assess the extent to which practices offering family planning services are able to offer intrauterine devices (IUDs) and implants in one visit and to identify the reasons why multiple visits may be required. In the fall of 2011, 1,000 California family planning providers were asked about their long-acting reversible contraception delivery practices in a probability survey. We used multivariable logistic regression to examine practice characteristics associated with same-day provision of IUDs and implants. Among the 636 responding practices, 67% offered an IUD and 40% offered a contraceptive implant onsite. Among those with onsite provision, the majority required two or more visits to place an IUD (58%); almost half required two visits to place an implant (47%). Nearly all Planned Parenthood practices could place an IUD (95%) or implant (95%) at the initial visit, whereas the majority of all other practice types could not. The main reasons for delaying IUD and contraceptive implant provision included the need to screen and wait for test results (68% and 24%, respectively) and clinic flow and scheduling issues (50% and 64%, respectively). Multivariable analyses indicated that Planned Parenthood practices were significantly more likely than private practices to have same-day insertion protocols. Most of the family planning providers surveyed have not adopted same-day long-acting reversible contraception insertion protocols and face barriers to same-day provision. III.

Exploration Mission Benefits From Logistics Reduction Technologies

NASA Technical Reports Server (NTRS)

Broyan, James Lee, Jr.; Schlesinger, Thilini; Ewert, Michael K.

2016-01-01

Technologies that reduce logistical mass, volume, and the crew time dedicated to logistics management become more important as exploration missions extend further from the Earth. Even modest reductions in logical mass can have a significant impact because it also reduces the packing burden. NASA's Advanced Exploration Systems' Logistics Reduction Project is developing technologies that can directly reduce the mass and volume of crew clothing and metabolic waste collection. Also, cargo bags have been developed that can be reconfigured for crew outfitting and trash processing technologies to increase habitable volume and improve protection against solar storm events are under development. Additionally, Mars class missions are sufficiently distant that even logistics management without resupply can be problematic due to the communication time delay with Earth. Although exploration vehicles are launched with all consumables and logistics in a defined configuration, the configuration continually changes as the mission progresses. Traditionally significant ground and crew time has been required to understand the evolving configuration and locate misplaced items. For key mission events and unplanned contingencies, the crew will not be able to rely on the ground for logistics localization assistance. NASA has been developing a radio frequency identification autonomous logistics management system to reduce crew time for general inventory and enable greater crew self-response to unplanned events when a wide range of items may need to be located in a very short time period. This paper provides a status of the technologies being developed and there mission benefits for exploration missions.

Electrochemical transformation of trichloroethylene in aqueous solution by electrode polarity reversal.

PubMed

Rajic, Ljiljana; Fallahpour, Noushin; Yuan, Songhu; Alshawabkeh, Akram N

2014-12-15

Electrode polarity reversal is evaluated for electrochemical transformation of trichloroethylene (TCE) in aqueous solution using flow-through reactors with mixed metal oxide electrodes and Pd catalyst. The study tests the hypothesis that optimizing electrode polarity reversal will generate H2O2 in Pd presence in the system. The effect of polarity reversal frequency, duration of the polarity reversal intervals, current intensity and TCE concentration on TCE removal rate and removal mechanism were evaluated. TCE removal efficiencies under 6 cycles h(-1) were similar in the presence of Pd catalyst (50.3%) and without Pd catalyst (49.8%), indicating that Pd has limited impact on TCE degradation under these conditions. The overall removal efficacies after 60 min treatment under polarity reversal frequencies of 6, 10, 15, 30 and 90 cycles h(-1) were 50.3%, 56.3%, 69.3%, 34.7% and 23.4%, respectively. Increasing the frequency of polarity reversal increases TCE removal as long as sufficient charge is produced during each cycle for the reaction at the electrode. Electrode polarity reversal shifts oxidation/reduction and reduction/oxidation sequences in the system. The optimized polarity reversal frequency (15 cycles h(-1) at 60 mA) enables two reaction zones formation where reduction/oxidation occurs at each electrode surface. Published by Elsevier Ltd.

Electrochemical transformation of trichloroethylene in aqueous solution by electrode polarity reversal

PubMed Central

Rajic, Ljiljana; Fallahpour, Noushin; Yuan, Songhu; Alshawabkeh, Akram N.

2014-01-01

Electrode polarity reversal is evaluated for electrochemical transformation of trichloroethylene (TCE) in aqueous solution using flow-through reactors with mixed metal oxide electrodes and Pd catalyst. The study tests the hypothesis that optimizing electrode polarity reversal will generate H2O2 in Pd presence in the system. The effect of polarity reversal frequency, duration of the polarity reversal intervals, current intensity and TCE concentration on TCE removal rate and removal mechanism were evaluated. TCE removal efficiencies under 6 cycles h−1 were similar in the presence of Pd catalyst (50.3%) and without Pd catalyst (49.8%), indicating that Pd has limited impact on TCE degradation under these conditions. The overall removal efficacies after 60 min treatment under polarity reversal frequencies of 6, 10, 15, 30 and 90 cycles h−1 were 50.3%, 56.3%, 69.3%, 34.7% and 23.4%, respectively. Increasing the frequency of polarity reversal increases TCE removal as long as sufficient charge is produced during each cycle for the reaction at the electrode. Electrode polarity reversal shifts oxidation/reduction and reduction/oxidation sequences in the system. The optimized polarity reversal frequency (15 cycles h−1 at 60 mA) enables two reaction zones formation where reduction/oxidation occurs at each electrode surface. PMID:25282093

Space Station evolution study

NASA Technical Reports Server (NTRS)

Evans, David B.

1993-01-01

This is the Space Station Freedom (SSF) Evolution Study 1993 Final Report, performed under NASA Contract NAS8-38783, Task Order 5.1. This task examined: (1) the feasibility of launching current National Space Transportation System (NSTS) compatible logistics elements on expendable launch vehicles (ELV's) and the associated modifications, and (2) new, non-NSTS logistics elements for launch on ELV's to augment current SSF logistics capability.

Logistics Modernization Program System Procure-to-Pay Process Did Not Correct Material Weaknesses

DTIC Science & Technology

2012-05-29

Prevalidation of DOD Commercial Payments,” March 2, 2007 Army U.S. Army Audit Agency Report No. A-2007-0205- FFM , “Logistics Modernization Program...Report No. A-2007-0163- FFM , “FY 03–FY 05 Obligations Recorded in the Logistics Modernization Program,” July 27, 2007 U.S. Army Audit Agency Report No

Bifurcation and Fractal of the Coupled Logistic Map

NASA Astrophysics Data System (ADS)

Wang, Xingyuan; Luo, Chao

The nature of the fixed points of the coupled Logistic map is researched, and the boundary equation of the first bifurcation of the coupled Logistic map in the parameter space is given out. Using the quantitative criterion and rule of system chaos, i.e., phase graph, bifurcation graph, power spectra, the computation of the fractal dimension, and the Lyapunov exponent, the paper reveals the general characteristics of the coupled Logistic map transforming from regularity to chaos, the following conclusions are shown: (1) chaotic patterns of the coupled Logistic map may emerge out of double-periodic bifurcation and Hopf bifurcation, respectively; (2) during the process of double-period bifurcation, the system exhibits self-similarity and scale transform invariability in both the parameter space and the phase space. From the research of the attraction basin and Mandelbrot-Julia set of the coupled Logistic map, the following conclusions are indicated: (1) the boundary between periodic and quasiperiodic regions is fractal, and that indicates the impossibility to predict the moving result of the points in the phase plane; (2) the structures of the Mandelbrot-Julia sets are determined by the control parameters, and their boundaries have the fractal characteristic.

The application of virtual reality systems as a support of digital manufacturing and logistics

NASA Astrophysics Data System (ADS)

Golda, G.; Kampa, A.; Paprocka, I.

2016-08-01

Modern trends in development of computer aided techniques are heading toward the integration of design competitive products and so-called "digital manufacturing and logistics", supported by computer simulation software. All phases of product lifecycle: starting from design of a new product, through planning and control of manufacturing, assembly, internal logistics and repairs, quality control, distribution to customers and after-sale service, up to its recycling or utilization should be aided and managed by advanced packages of product lifecycle management software. Important problems for providing the efficient flow of materials in supply chain management of whole product lifecycle, using computer simulation will be described on that paper. Authors will pay attention to the processes of acquiring relevant information and correct data, necessary for virtual modeling and computer simulation of integrated manufacturing and logistics systems. The article describes possibilities of use an applications of virtual reality software for modeling and simulation the production and logistics processes in enterprise in different aspects of product lifecycle management. The authors demonstrate effective method of creating computer simulations for digital manufacturing and logistics and show modeled and programmed examples and solutions. They pay attention to development trends and show options of the applications that go beyond enterprise.

Dynamic origin of segment magnetization reversal in thin-film Penrose tilings

NASA Astrophysics Data System (ADS)

Montoncello, F.; Giovannini, L.; Farmer, B.; De Long, L.

2017-02-01

We investigate the low-frequency spin wave dynamics involved in the magnetization reversal of a Penrose P2 tiling using the dynamical matrix method. This system consists of a two-dimensional, connected wire network of elongated thin-film segments, whose complete reversal occurs as a cascade of successive local segment reversals. Using soft mode theory, we interpret the reversal of an individual segment as a first order magnetic transition, in which magnetization curve of the system suffers a small discontinuity. Near this discontinuity a specific mode of the spin wave spectrum goes soft (i.e., its frequency goes to zero), triggering a local instability of the magnetization. We show that this mode is localized, and is at the origin of the local reversal. We discuss the correlation of the mode spatial profile with the ;reversal mechanism;, which is the passage of a domain wall through the segment. This process differs from reversal in periodic square or honeycomb artificial spin ices, where a cascade of reversing segments (e.g., ;Dirac string;) follows an extended (though irregular) path across the sample; here the spatial distribution of successive segment reversals is discontinuous, but strictly associated with the area where a soft mode is localized. The migration of the localization area across the P2 tiling (during reversal in decreasing applied fields) depends on changes in the internal effective field map. We discuss these results in the context of spin wave localization due to the unique topology of the P2 tiling.

Defense ADP Acquisition Study.

DTIC Science & Technology

1981-11-30

Logistics ALS - Advanced Logistics System AMP - ADPS Master Plan ANSI - American National Standards Institute APR - Agency Procurement Request ASD(C...Computers IRM - Information Resources Management ISO - International Standards Organization L LCC - Life Cycle Costs LCM - Life Cycle Management LE...man- agement in the process * Lack of a mission orientation . Lack of systems management and life cycle perspectives * Lack of effective leadership

A High Resolution Ammunition Resupply Model.

DTIC Science & Technology

1982-03-01

LOU ............... 104 3. Requests for Resupply . . ........ 108 a. Weapon Systems . . . . . . . . . . . . 108 b. Platoon . ... 109 c. Company...essence, the fundamental question, "Can it be done?", is never adequately answered. B. LOGISTICS MODELS Current logistics models then, although...19 .._ " Development of a detailed model that responds to requests for ammunition resupply, maintains a simplified stockage system , and models the

Mathematical modeling of project management in logistics systems based on two-dimensional random vector

NASA Astrophysics Data System (ADS)

Glushkova, Yu O.; Gordashnukova, O. Yu; Pahomova, A. V.; Shatohina, S. P.; Filippov, D. V.

2018-05-01

The modern markets are characterized by fierce competition, constantly changing demand, increasing demands of consumers, shortening of the life cycle of goods and services in connection with scientific and technological progress. Therefore, for survival, modern logistic systems of industrial enterprises must be constantly improved. Modern economic literature is represented by a large volume of publications on various aspects of the studied issues. They consider the issues of project management in the logistics system that inevitably encounter with triple Limited. It initially describes the balance between project content, cost, and time. Later it was suggested to either replace the content with quality or add a fourth criterion. Therefore it is possible to name such limitation as triple or four-criteria limitation.

Short-term cascaded hydroelectric system scheduling based on chaotic particle swarm optimization using improved logistic map

NASA Astrophysics Data System (ADS)

He, Yaoyao; Yang, Shanlin; Xu, Qifa

2013-07-01

In order to solve the model of short-term cascaded hydroelectric system scheduling, a novel chaotic particle swarm optimization (CPSO) algorithm using improved logistic map is introduced, which uses the water discharge as the decision variables combined with the death penalty function. According to the principle of maximum power generation, the proposed approach makes use of the ergodicity, symmetry and stochastic property of improved logistic chaotic map for enhancing the performance of particle swarm optimization (PSO) algorithm. The new hybrid method has been examined and tested on two test functions and a practical cascaded hydroelectric system. The experimental results show that the effectiveness and robustness of the proposed CPSO algorithm in comparison with other traditional algorithms.

Air Force Journal of Logistics: Logistics Dimensions Improving Bare Base Agile Combat Support, The Path to Integration. Volume 28, Number 2

DTIC Science & Technology

2004-01-01

the system is balanced, there is the right flow of new pilots to match the availability of instructors for initial training missions, the right mix of...which attempted to redesign and streamline the DoD global distribution system , significantly improved delivery time to test locations.4 During its...somewhat confusing priority system that does not guarantee cargo delivery at a specific time and a pricing system that does not adequately differentiate

76 FR 11415 - Federal Motor Vehicle Safety Standards; Power-Operated Window, Partition, and Roof Panel Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

... automatic reversal systems (ARS) for power windows and to make a final decision. The agency has decided not... requirements for automatic reversal systems (ARS) and are withdrawing our 2009 proposal regarding ARS. This... of proposed rulemaking (NPRM) proposing new requirements for ARS. The proposal discussed the agency's...

Breaking time reversal in a simple smooth chaotic system.

PubMed

Tomsovic, Steven; Ullmo, Denis; Nagano, Tatsuro

2003-06-01

Within random matrix theory, the statistics of the eigensolutions depend fundamentally on the presence (or absence) of time reversal symmetry. Accepting the Bohigas-Giannoni-Schmit conjecture, this statement extends to quantum systems with chaotic classical analogs. For practical reasons, much of the supporting numerical studies of symmetry breaking have been done with billiards or maps, and little with simple, smooth systems. There are two main difficulties in attempting to break time reversal invariance in a continuous time system with a smooth potential. The first is avoiding false time reversal breaking. The second is locating a parameter regime in which the symmetry breaking is strong enough to transform the fluctuation properties fully to the broken symmetry case, and yet remain weak enough so as not to regularize the dynamics sufficiently that the system is no longer chaotic. We give an example of a system of two coupled quartic oscillators whose energy level statistics closely match with those of the Gaussian unitary ensemble, and which possesses only a minor proportion of regular motion in its phase space.

Global Spent Fuel Logistics Systems Study (GSFLS). Volume 3A. GSFLS technical analysis (appendix). Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriger, A.

1978-01-31

This report is a part of the interim report documentation for the Global Spent Fuel Logistics System (GSFLS) study. The technical and financial considerations underlying a global spent fuel logistics systems have been studied and are reported. The Pacific Basin is used as a model throughout this report; however the stated methodology and, in many cases, considerations and conclusions are applicable to other global regions. Spent fuel discharge profiles for Pacific Basin Countries were used to determine the technical systems requirements for alternative concepts. Functional analyses and flows were generated to define both system design requirements and logistics parameters. Amore » technology review was made to ascertain the state-of-the-art of relevant GSFLS technical systems. Modular GSFLS facility designs were developed using the information generated from the functional analysis and technology review. The modular facility designs were used as a basis for siting and cost estimates for various GSFLS alternatives. Various GSFLS concepts were analyzed from a financial and economic perspective in order to provide total concepts costs and ascertain financial and economic sensitivities to key GSFLS variations. Results of the study include quantification of GSFLS facility and hardware requirements; drawings of relevant GSFLS facility designs; system cost estimates; financial reports - including user service charges; and comparative analyses of various GSFLS alternatives.« less

Serum microRNAs as biomarkers for recurrence in melanoma

PubMed Central

2012-01-01

Background Identification of melanoma patients at high risk for recurrence and monitoring for recurrence are critical for informed management decisions. We hypothesized that serum microRNAs (miRNAs) could provide prognostic information at the time of diagnosis unaccounted for by the current staging system and could be useful in detecting recurrence after resection. Methods We screened 355 miRNAs in sera from 80 melanoma patients at primary diagnosis (discovery cohort) using a unique quantitative reverse transcription-PCR (qRT-PCR) panel. Cox proportional hazard models and Kaplan-Meier recurrence-free survival (RFS) curves were used to identify a miRNA signature with prognostic potential adjusting for stage. We then tested the miRNA signature in an independent cohort of 50 primary melanoma patients (validation cohort). Logistic regression analysis was performed to determine if the miRNA signature can determine risk of recurrence in both cohorts. Selected miRNAs were measured longitudinally in subsets of patients pre-/post-operatively and pre-/post-recurrence. Results A signature of 5 miRNAs successfully classified melanoma patients into high and low recurrence risk groups with significant separation of RFS in both discovery and validation cohorts (p = 0.0036, p = 0.0093, respectively). Significant separation of RFS was maintained when a logistic model containing the same signature set was used to predict recurrence risk in both discovery and validation cohorts (p < 0.0001, p = 0.033, respectively). Longitudinal expression of 4 miRNAs in a subset of patients was dynamic, suggesting miRNAs can be associated with tumor burden. Conclusion Our data demonstrate that serum miRNAs can improve accuracy in identifying primary melanoma patients with high recurrence risk and in monitoring melanoma tumor burden over time. PMID:22857597

Yogurt consumption and abdominal obesity reversion in the PREDIMED study.

PubMed

Santiago, S; Sayón-Orea, C; Babio, N; Ruiz-Canela, M; Martí, A; Corella, D; Estruch, R; Fitó, M; Aros, F; Ros, E; Gómez-García, E; Fiol, M; Lapetra, J; Serra-Majem, Ll; Becerra-Tomás, N; Salas-Salvadó, J; Pinto, X; Schröder, H; Martínez, J A

2016-06-01

Evidence on the association yogurt consumption and obesity is not conclusive. The aim of this study was to prospectively evaluate the association between yogurt consumption, reversion of abdominal obesity status and waist circumference change in elderly. 4545 individuals at high cardiovascular risk were prospectively followed. Total, whole-fat and low-fat yogurt consumption were assessed using food frequency questionnaires. Generalized estimating equations were used to analyze the association between yogurt consumption and waist circumference change (measured at baseline and yearly during the follow-up). Logistic regression models were used to evaluate the odds ratios (ORs) and 95% CIs of the reversion rate of abdominal obesity for each quintile of yogurt consumption compared with the lowest quintile. After multivariable adjustment, the average yearly waist circumference change in the quintiles of whole-fat yogurt consumption was: Q1: 0.00, Q2: 0.00 (-0.23 to 0.23), Q3: -0.15 (-0.42 to 0.13), Q4: 0.10 (-0.21 to 0.42), and Q5: -0.23 (-0.46 to -0.00) cm; p for trend = 0.05. The ORs for the reversion of abdominal obesity for whole-fat yogurt consumption were Q1: 1.00, Q2: 1.40 (1.04-1.90), Q3: 1.33 (0.94-1.89), Q4: 1.21 (0.83-1.77), and Q5: 1.43 (1.06-1.93); p for trend = 0.26. Total yogurt consumption was not significantly associated with reversion of abdominal obesity status and a lower waist circumference. However, consumption of whole-fat yogurt was associated with changes in waist circumference and higher probability for reversion of abdominal obesity. Therefore, it seems that whole-fat yogurt has more beneficial effects in management of abdominal obesity in elderly population at high cardiovascular risk. Copyright © 2015 The Italian Society of Diabetology, the Italian Society for the Study of Atherosclerosis, the Italian Society of Human Nutrition, and the Department of Clinical Medicine and Surgery, Federico II University. Published by Elsevier B.V. All rights reserved.

Reversible formation of aminals: a new strategy to control the release of bioactive volatiles from dynamic mixtures.

PubMed

Godin, Guillaume; Levrand, Barbara; Trachsel, Alain; Lehn, Jean-Marie; Herrmann, Andreas

2010-05-14

Dynamic mixtures generated by reversible aminal formation of fragrance aldehydes with N,N-dibenzyl alkyldiamines in aqueous systems were found to be suitable delivery systems for the controlled release of bioactive volatiles.

GAS DISCHARGE SWITCH EVALUATION FOR RHIC BEAM ABORT KICKER APPLICATION.

DOE Office of Scientific and Technical Information (OSTI.GOV)

ZHANG,W.; SANDBERG,J.; SHELDRAKE,R.

2002-06-30

A gas discharge switch EEV HX3002 is being evaluated at Brookhaven National Laboratory as a possible candidate of RHIC Beam Abort Kicker modulator main switch. At higher beam energy and higher beam intensity, the switch stability becomes very crucial. The hollow anode thyratron used in the existing system is not rated for long reverse current conduction. The reverse voltage arcing caused thyratron hold-off voltage de-rating has been the main limitation of the system operation. To improve the system reliability, a new type of gas discharge switch has been suggested by Marconi Applied Technology for its reverse conducting capability.

Tips of the dual-lumen microcatheter-facilitated reverse wire technique in percutaneous coronary interventions for markedly angulated bifurcated lesions.

PubMed

Nomura, Tetsuya; Kikai, Masakazu; Hori, Yusuke; Yoshioka, Kenichi; Kubota, Hiroshi; Miyawaki, Daisuke; Urata, Ryota; Sugimoto, Takeshi; Keira, Natsuya; Tatsumi, Tetsuya

2018-04-01

In practical settings of percutaneous coronary intervention (PCI), we sometimes encounter difficulty in introducing a guidewire (GW) to the markedly angulated side branch (SB), and the reverse wire technique is considered as a last resort to overcome such a situation. We analyzed 12 cases that underwent PCI with dual-lumen microcatheter-facilitated reverse wire technique between January 2013 and July 2016. We retrospectively investigated the lesion's characteristics and the details of the PCI procedures, and discussed tips about the use of this technique. The SB that exhibits both a smaller take-off angle and a larger carina angle is considered to be the most suitable candidate for this technique. The first step of this technique involves the delivery of the reverse wire system to the target bifurcation. However, most cases exhibit significant stenosis proximal to the bifurcation, which often hampers the delivery of the reverse wire system. Because the sharply curved reverse wire system is easier to pass the stenosis as compared to the roundly curved system, we recommend a sharp curve should be adopted for this technique. On the other hand, it is sure that device delivery is much easier on the GW with a round curve as compared to that with a sharp curve. Therefore, it is important to modify the details of this procedure on a case-by-case basis according to the lesion's characteristics.

Defense Logistics: Army Should Track Financial Benefits Realized from its Logistics Modernization Program

DTIC Science & Technology

2013-11-01

system does not support certain critical requirements, including enabling the Army to generate auditable financial statements by fiscal year 2017 ...current system will not enable the Army to generate auditable financial statements by 2017 , the statutory deadline for this goal. Increment 2, which...fourth quarter of fiscal year 2017 , all three of these enterprise resource planning systems are expected to be fully deployed, to share a common set

Focused Logistics and Support for Force Projection in Force XXI and Beyond

DTIC Science & Technology

1999-12-09

business system linking trading partners with point of sale demand and real time manufacturing for clothing items.17 Quick Response achieved $1.7...be able to determine the real - time status and supply requirements of units. With "distributed logistics system software model hosts൨ and active...location, quantity, condition, and movement of assets. The system is designed to be fully automated, operate in near- real time with an open-architecture

Linking Logistics and Operations: A Case Study of World War II Air Power

DTIC Science & Technology

1991-01-01

Weapon System Evaluation Group, 1951, p. 30). The logistic innovation greatly extended the time that combat ships could remain on station and...presented. This Note was produced under the Project AIR FORCE Resource Management and System Acquisition Program in the project "Combat Support C3 Needs...maintenance workload data suggest either unacceptable system performance or excessive costs. The predictive power of these models is so poor as to

Artificial intelligence applications in logistics information systems : final report

DOT National Transportation Integrated Search

1990-04-01

This report is the principal deliverable from the LIMSS-AI project. It summarizes the results of a survey of existing applications and discusses the feasibility and benefits of specific candidate logistics applications.

Serological Evidence for the Circulation of Rift Valley Fever Virus in Domestic Small Ruminants in Southern Gabon.

PubMed

Maganga, Gael Darren; Abessolo Ndong, Andre Lea; Mikala Okouyi, Clency Sylde; Makiala Mandanda, Sheila; N'Dilimabaka, Nadine; Pinto, Anais; Agossou, Ernest; Cossic, Brieuc; Akue, Jean-Paul; Leroy, Eric Maurice

2017-06-01

Rift Valley fever (RVF) is a zoonotic disease, which caused several epidemics in humans in many countries of Africa. Using an inhibition enzyme-linked immunosorbent assay (ELISA), real-time reverse transcription PCR, and nested one-step reverse transcription PCR, we conducted a cross-sectional study in populations of sheep and goats from the Mongo County in 2014 to determine the circulation of the Rift Valley fever virus (RVFV) in small ruminants from this area. From a total of 201 small ruminants (95 sheep and 106 goats), the overall IgG seroprevalence against the RVFV was 6.47% (13/201). No RVFV RNA was detected in the animal plasmas. Logistic regression analysis showed that age, species, sex, and locality were not the significant risk factors. The findings of this study highlight the risk of RVF for domestic ruminants bred in this region and for the human rural population living in contact with these animals and they emphasize the need to develop adequate control measures to limit this threat.

System for improving measurement accuracy of transducer by measuring transducer temperature and resistance change using thermoelectric voltages

NASA Technical Reports Server (NTRS)

Anderson, Karl F. (Inventor); Parker, Allen R., Jr. (Inventor)

1993-01-01

A constant current loop measuring system measures a property including the temperature of a sensor responsive to an external condition being measured. The measuring system includes thermocouple conductors connected to the sensor, sensing first and second induced voltages responsive to the external condition. In addition, the measuring system includes a current generator and reverser generating a constant current, and supplying the constant current to the thermocouple conductors in forward and reverse directions generating first and second measured voltages, and a determining unit receiving the first and second measured voltages from the current generator and reverser, and determining the temperature of the sensor responsive to the first and second measured voltages.

RECYCLING NICKEL ELECTROPLATING RINSE WATERS BY LOW TEMPERATURE EVAPORATION AND REVERSE OSMOSIS

EPA Science Inventory

Low temperature evaporation and reverse osmosis systems were each evaluated (on a pilot scale) on their respective ability to process rinse water collected from a nickel electroplating operation. Each system offered advantages under specific operating conditions. The low temperat...

Identification of Reversible Disruption of the Human Blood-Brain Barrier Following Acute Ischemia.

PubMed

Simpkins, Alexis N; Dias, Christian; Leigh, Richard

2016-09-01

Animal models of acute cerebral ischemia have demonstrated that diffuse blood-brain barrier (BBB) disruption can be reversible after early reperfusion. However, irreversible, focal BBB disruption in humans is associated with hemorrhagic transformation in patients receiving intravenous thrombolytic therapy. The goal of this study was to use a magnetic resonance imaging biomarker of BBB permeability to differentiate these 2 forms of BBB disruption. Acute stroke patients imaged with magnetic resonance imaging before, 2 hours after, and 24 hours after treatment with intravenous tissue-type plasminogen activator were included. The average BBB permeability of the acute ischemic region before and 2 hours after treatment was calculated using a T2* perfusion-weighted source images. Change in average permeability was compared with percent reperfusion using linear regression. Focal regions of maximal BBB permeability from the pretreatment magnetic resonance imaging were compared with the occurrence of parenchymal hematoma (PH) formation on the 24-hour magnetic resonance imaging scan using logistic regression. Signals indicating reversible BBB permeability were detected in 18/36 patients. Change in average BBB permeability correlated inversely with percent reperfusion (P=0.006), indicating that early reperfusion is associated with decreased BBB permeability, whereas sustained ischemia is associated with increased BBB disruption. Focal regions of maximal BBB permeability were significantly associated with subsequent formation of PH (P=0.013). This study demonstrates that diffuse, mild BBB disruption in the acutely ischemic human brain is reversible with reperfusion. This study also confirms prior findings that focal severe BBB disruption confers an increased risk of hemorrhagic transformation in patients treated with intravenous tissue-type plasminogen activator. © 2016 American Heart Association, Inc.

Performance Based Logistics: Optimizing Total System Availability and Reducing Program Cost

DTIC Science & Technology

2011-03-14

MONITOR’S REPORT Dr. Paul C. Jussel NUMBER(S) U.S. Army War College 12. DISTRIBUTION / AVAILABILITY STATEMENT Distribution Statement A...Colonel David M. Kaczmarski United States Army Dr. Paul C. Jussel Project Adviser This CRP is submitted in...8911927-1.html# (accessed 10 November 2010) 2 Hurst, Dana . Performance Based Logistics – A Bridge Between Acquisition Reform and Logistics Supply

LOGMIS Programmed Texts, Tests and Answers.

DTIC Science & Technology

1979-04-01

This publication contains the programmed text and related test and answer booklets produced to teach field users correct procedures for utilization of the Army’s Logistics Management Information System (LOGMIS). It was prepared by ARINC Research Corporation under Contract DAEA18-77-C-0184 for the Logistics Evaluation Branch, Plans and Programs Division of the Assistant Chief of Staff for Logistics, U.S. Army Communications Command. (Author)

Airship logistics: The LTA vehicle; a total cargo system

NASA Technical Reports Server (NTRS)

Hackney, L. R. M.

1975-01-01

Design considerations for logistics are dealt with as they pertain to the large rigid LTA vehicle as either a commercial or military cargo carrier. Pertinent factors discussed are: (1) the basic mission; (2) types of payload; (3) the payload space in regards to configuration and sizing, its capacity, and its loadability. A logistic capability comparison of selected cargo airships versus jumbo jets is also made.

Localization of a bacterial cytoplasmic receptor is dynamic and changes with cell-cell contacts

PubMed Central

Mauriello, Emilia M. F.; Astling, David P.; Sliusarenko, Oleksii; Zusman, David R.

2009-01-01

Directional motility in the gliding bacterium Myxococcus xanthus requires controlled cell reversals mediated by the Frz chemosensory system. FrzCD, a cytoplasmic chemoreceptor, does not form membrane-bound polar clusters typical for most bacteria, but rather cytoplasmic clusters that appear helically arranged and span the cell length. The distribution of FrzCD in living cells was found to be dynamic: FrzCD was localized in clusters that continuously changed their size, number, and position. The number of FrzCD clusters was correlated with cellular reversal frequency: fewer clusters were observed in hypo-reversing mutants and additional clusters were observed in hyper-reversing mutants. When moving cells made side-to-side contacts, FrzCD clusters in adjacent cells showed transient alignments. These events were frequently followed by one of the interacting cells reversing. These observations suggest that FrzCD detects signals from a cell contact-sensitive signaling system and then re-localizes as it directs reversals to distributed motility engines. PMID:19273862

Data Management Standards in Computer-aided Acquisition and Logistic Support (CALS)

NASA Technical Reports Server (NTRS)

Jefferson, David K.

1990-01-01

Viewgraphs and discussion on data management standards in computer-aided acquisition and logistic support (CALS) are presented. CALS is intended to reduce cost, increase quality, and improve timeliness of weapon system acquisition and support by greatly improving the flow of technical information. The phase 2 standards, industrial environment, are discussed. The information resource dictionary system (IRDS) is described.

Service-Oriented Architecture Approach to MAGTF Logistics Support Systems

DTIC Science & Technology

2013-09-01

Support System-Marine Corps IT Information Technology KPI Key Performance Indicators LCE Logistics Command Element ITV In-transit Visibility LCM...building blocks, options, KPI (key performance indicators), design decisions and the corresponding; the physical attributes which is the second attribute... KPI ) that they impact. h. Layer 8 (Information Architecture) The business intelligence layer and information architecture safeguards the inclusion

Comparing Methodologies for Developing an Early Warning System: Classification and Regression Tree Model versus Logistic Regression. REL 2015-077

ERIC Educational Resources Information Center

Koon, Sharon; Petscher, Yaacov

2015-01-01

The purpose of this report was to explicate the use of logistic regression and classification and regression tree (CART) analysis in the development of early warning systems. It was motivated by state education leaders' interest in maintaining high classification accuracy while simultaneously improving practitioner understanding of the rules by…

Logistic Support for the Navy One-Man One-Atmosphere Diving System (NOMOADS).

DTIC Science & Technology

1987-12-01

AD-19 621 LOGISTIC SUPPORT FOR THE NAVY ONE-MAN ONE-ATMOSPHERE 1/1 DIVING SYSTEM (NOMODS)(U) NAVAL POSTGRADUATE SCHOOL MONTEREY CA M P SMITH DEC 67...6-1 6.1 Major Program Events .................................... 6-1 6.2 M IIe st on es...4-i 6-1 Major Program Events ...................................... 6-2 6-2 M i lestones

The Logistical Tracking System (LTS) Five Years Later: What Has Been Accomplished?

ERIC Educational Resources Information Center

Valcik, Nicolas A.

2007-01-01

The purpose of this research is to discuss development of the Logistical Tracking System (LTS)1 and evaluate the changes in processes and procedures at the University of Texas-Dallas (UT-Dallas) that were due to implementation of a new type of technology. The chapter elaborates on the positive and negative aspects of designing and constructing a…

The Emerging Role of the Data Base Manager. Report No. R-1253-PR.

ERIC Educational Resources Information Center

Sawtelle, Thomas K.

The Air Force Logistics Command (AFLC) is revising and enhancing its data-processing capabilities with the development of a large-scale, multi-site, on-line, integrated data base information system known as the Advanced Logistics System (ALS). A data integrity program is to be built around a Data Base Manager (DBM), an individual or a group of…

Challenges and models in supporting logistics system design for dedicated-biomass-based bioenergy industry.

PubMed

Zhu, Xiaoyan; Li, Xueping; Yao, Qingzhu; Chen, Yuerong

2011-01-01

This paper analyzed the uniqueness and challenges in designing the logistics system for dedicated biomass-to-bioenergy industry, which differs from the other industries, due to the unique features of dedicated biomass (e.g., switchgrass) including its low bulk density, restrictions on harvesting season and frequency, content variation with time and circumambient conditions, weather effects, scattered distribution over a wide geographical area, and so on. To design it, this paper proposed a mixed integer linear programming model. It covered from planting and harvesting switchgrass to delivering to a biorefinery and included the residue handling, concentrating on integrating strategic decisions on the supply chain design and tactical decisions on the annual operation schedules. The present numerical examples verified the model and demonstrated its use in practice. This paper showed that the operations of the logistics system were significantly different for harvesting and non-harvesting seasons, and that under the well-designed biomass logistics system, the mass production with a steady and sufficient supply of biomass can increase the unit profit of bioenergy. The analytical model and practical methodology proposed in this paper will help realize the commercial production in biomass-to-bioenergy industry. Copyright © 2010 Elsevier Ltd. All rights reserved.

Performance characteristics of plane-wall venturi-like reverse flow diverters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, G.V.; Counce, R.M.

1984-02-01

The results of an analytical and experimental study of plane-wall venturi-like reverse flow diverters (RFD) are presented. In general, the flow characteristics of the RFD are reasonably well predicted by the mathematical model of the RFD, although a divergence between theory and data is observed for the output characteristics in the reverse flow mode as the output impedance is reduced. Overall, the performance of these devices indicates their usefulness in fluid control and fluid power systems, such as displacement pumping systems.

Performance characteristics of plane-wall venturi-like reverse flow diverters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, G.V.; Counce, R.M.

1982-01-01

The results of an analytical and experimental study of plane-wall venturi-like reverse flow diverters (RFD) are presented. In general, the flow characteristics of the RFD are reasonably well predicted by the mathematical model of the RFD, although a divergence between theory and data is observed for the output characteristics in the reverse flow mode as the output impedance is reduced. Overall, the performance of these devices indicates their usefulness in fluid control and fluid power systems, such as displacement pumping systems.

Evaluation of MIh Scoring System in Diagnosis of Obstructive Sleep Apnea Syndrome.

PubMed

Xu, Qinxing; Du, Junwei; Ling, Xiaobo; Lu, Yangfei

2017-10-02

BACKGROUND The objective of the present study was to investigate whether the analysis of magnesium (Mg), high-sensitivity C-reactive protein (hsCRP), and ischemia-modified albumin (IMA) concentrations can be used as a non-invasive and convenient method for diagnosing obstructive sleep apnea syndrome (OSAS). MATERIAL AND METHODS After polysomnography, venous blood was collected from 33 patients with OSAS and 30 control individuals. Serum levels of Mg, hsCRP, and IMA were investigated. The relationship between these factors and apnea-hypopnea index (AHI) was analyzed using the Pearson correlation coefficient. The role of the factors was determined using a receiver operating characteristic (ROC) curve and multivariate logistic regression analysis. RESULTS The levels of hsCRP and IMA were significantly higher in patients with OSAS than in control subjects, while the levels of Mg were lower (P<0.05 for all). A significant correlation was noted between serum IMA (r=0.614; P<0.001) and hsCRP (r=0.453; P<0.001) levels and the AHI. The ROC showed that serum Mg (AUC=0.74(0.62-0.85)), hsCRP (AUC=0.77(0.65-0.87)), and IMA (AUC=0.78(0.66-0.87)) levels could be used as markers to diagnose OSAS. Moreover, our new model, MIh, which is obtained by multivariate analysis, yielded an AUC value of 0.93 (0.83-0.98). Continuous positive airway pressure (CPAP) treatment reversed the changes in the serum levels of Mg, hsCRP, and IMA. CONCLUSIONS Patients with OSAS show reduced serum Mg levels and elevated serum hsCRP and IMA levels. These observed alterations can be reversed by CPAP treatment. A novel model, named MIh, may be a promising tool for OSAS diagnosis.

Presence of Headache and Migraine in Asthma Patients.

PubMed

Turan, Muzaffer Onur; Susuz, Çiğdem Çelik; Turan, Pakize Ayşe

2017-04-01

Migraine is a diseases characterized with severe headaches, with neurological and systemic findings. The purpose of this study is to investigate the prevalence of migraine and to examine whether there is a relationship between atopic disorders, parental history and migraine in asthma patients. A total of 288 asthma outpatients, who had the diagnosis by an early or late test of reversibility showing a reversible airway obstruction according to hospital database were included. The presence of headache, atopic symptoms and parental history about asthma, atopic disorders and migraine were asked. The patients with headache were consultated by neurology department and investigated about the presence of migraine. The diagnosis of migraine headache was made if patients fulfilled the International Headache Society (IHS) criteria. 60.4% of patients described a headache. There were 94 patients (32.6%) with headaches meeting the IHS criteria for migraine. Only 12 patients had migraine with aura. There were atopic symptoms in 86.8% of patients. According to parental history, there were asthma in 47.9%, atopic symptoms in 39.6% and migraine in 22.2% of parents. Patients with atopic symptoms were found to have significantly high rate of headaches (65.3%) "p=0.007". The prevalence of migraine was significantly high in patients with parental atopic symptoms (54%) "p=0.002". Multiple logistic regression analysis identified that gender, parental history of asthma, allergia and migraine, and smoking were independent risk factors for presence of migraine in asthmatics. There is a high prevalence of migraine headaches in patients with asthma. The coexistence of asthma and headaches may be related with a similar pathophysiological mechanism; parental history, common genetic compounds and smoking may play role in this mechanism. The headaches in asthma patients, atopic symptoms and family history should be questioned, and clinicians should be careful about the presence of migraine.

Federal Logistics Information System (FLIS) Procedures Manual. Volume 5: Data Bank Interrogations/Search.

DTIC Science & Technology

1995-04-01

NO. 5 DoD 4100.39-M D oD 4100.39-MN Volume 5 DLSC- VPH 1 January 1997 "N FEDERAL LOGISTICS INFORMATION SYSTEM (FLIS) PROCEDURES MANUAL I. Volume 5. DoD...LOGISTICS SERVICES CENTER 74 WASHINGTON AVE N BATTLE CREEK MI 49017-3084 CH 4 CHANGE NO. 4 DoD 4100.39-M DoD 4100.39-M Volume 5 DLSC- VPH 1 July 1996 "FEDERAL...CENTER Volume 5 74 WASHINGTON AVE N BATTLE CREEK, MI 49017-3084 DLSC- VPH 1 April 1995 FOREWORD This is one of the volumes (see backside of cover for

A Simulation Based Approach for Contingency Planning for Aircraft Turnaround Operation System Activities in Airline Hubs

NASA Technical Reports Server (NTRS)

Adeleye, Sanya; Chung, Christopher

2006-01-01

Commercial aircraft undergo a significant number of maintenance and logistical activities during the turnaround operation at the departure gate. By analyzing the sequencing of these activities, more effective turnaround contingency plans may be developed for logistical and maintenance disruptions. Turnaround contingency plans are particularly important as any kind of delay in a hub based system may cascade into further delays with subsequent connections. The contingency sequencing of the maintenance and logistical turnaround activities were analyzed using a combined network and computer simulation modeling approach. Experimental analysis of both current and alternative policies provides a framework to aid in more effective tactical decision making.

Logistics Lessons Learned in NASA Space Flight

NASA Technical Reports Server (NTRS)

Evans, William A.; DeWeck, Olivier; Laufer, Deanna; Shull, Sarah

2006-01-01

The Vision for Space Exploration sets out a number of goals, involving both strategic and tactical objectives. These include returning the Space Shuttle to flight, completing the International Space Station, and conducting human expeditions to the Moon by 2020. Each of these goals has profound logistics implications. In the consideration of these objectives,a need for a study on NASA logistics lessons learned was recognized. The study endeavors to identify both needs for space exploration and challenges in the development of past logistics architectures, as well as in the design of space systems. This study may also be appropriately applied as guidance in the development of an integrated logistics architecture for future human missions to the Moon and Mars. This report first summarizes current logistics practices for the Space Shuttle Program (SSP) and the International Space Station (ISS) and examines the practices of manifesting, stowage, inventory tracking, waste disposal, and return logistics. The key findings of this examination are that while the current practices do have many positive aspects, there are also several shortcomings. These shortcomings include a high-level of excess complexity, redundancy of information/lack of a common database, and a large human-in-the-loop component. Later sections of this report describe the methodology and results of our work to systematically gather logistics lessons learned from past and current human spaceflight programs as well as validating these lessons through a survey of the opinions of current space logisticians. To consider the perspectives on logistics lessons, we searched several sources within NASA, including organizations with direct and indirect connections with the system flow in mission planning. We utilized crew debriefs, the John Commonsense lessons repository for the JSC Mission Operations Directorate, and the Skylab Lessons Learned. Additionally, we searched the public version of the Lessons Learned Information System (LLIS) and verified that we received the same result using the internal version of LLIS for our logistics lesson searches. In conducting the research, information from multiple databases was consolidated into a single spreadsheet of 300 lessons learned. Keywords were applied for the purpose of sorting and evaluation. Once the lessons had been compiled, an analysis of the resulting data was performed, first sorting it by keyword, then finding duplication and root cause, and finally sorting by root cause. The data was then distilled into the top 7 lessons learned across programs, centers, and activities.

Dynamic Models and Coordination Analysis of Reverse Supply Chain with Remanufacturing

NASA Astrophysics Data System (ADS)

Yan, Nina

In this paper, we establish a reverse chain system with one manufacturer and one retailer under demand uncertainties. Distinguishing between the recycling process of the retailer and the remanufacturing process of the manufacturer, we formulate a two-stage dynamic model for reverse supply chain based on remanufacturing. Using buyback contract as coordination mechanism and applying dynamic programming the optimal decision problems for each stage are analyzed. It concluded that the reverse supply chain system could be coordinated under the given condition. Finally, we carry out numerical calculations to analyze the expected profits for the manufacturer and the retailer under different recovery rates and recovery prices and the outcomes validate the theoretical analyses.

USAF Logistics Process Optimization Study for the Aircraft Asset Sustainment Process. Volume 1.

DTIC Science & Technology

1998-12-31

solely to have a record that could be matched with the CMOS receipt data. (This problem is caused by DLA systems that currently do not populate CMOS with...unable to obtain passwords to the Depot D035 systems. Figure 16 shows daily savings as of 30 September 1998 (current time frame ) and projects savings...Engineering, modeling, and systems/software development company LAN Local Area Network LFA Large Frame Aircraft LMA Logistics Management Agency LMR

Application studies of RFID technology in the process of coal logistics transport

NASA Astrophysics Data System (ADS)

Qiao, Bingqin; Chang, Xiaoming; Hao, Meiyan; Kong, Dejin

2012-04-01

For quality control problems in coal transport, RFID technology has been proposed to be applied to coal transportation process. The whole process RFID traceability system from coal production to consumption has been designed and coal supply chain logistics tracking system integration platform has been built, to form the coal supply chain traceability and transport tracking system and providing more and more transparent tracking and monitoring of coal quality information for consumers of coal. Currently direct transport and combined transport are the main forms of coal transportation in China. The means of transport are cars, trains and ships. In the booming networking environment of RFID technology, the RFID technology will be applied to coal logistics and provide opportunity for the coal transportation tracking in the process transportation.

Precise Positioning Method for Logistics Tracking Systems Using Personal Handy-Phone System Based on Mahalanobis Distance

NASA Astrophysics Data System (ADS)

Yokoi, Naoaki; Kawahara, Yasuhiro; Hosaka, Hiroshi; Sakata, Kenji

Focusing on the Personal Handy-phone System (PHS) positioning service used in physical distribution logistics, a positioning error offset method for improving positioning accuracy is invented. A disadvantage of PHS positioning is that measurement errors caused by the fluctuation of radio waves due to buildings around the terminal are large, ranging from several tens to several hundreds of meters. In this study, an error offset method is developed, which learns patterns of positioning results (latitude and longitude) containing errors and the highest signal strength at major logistic points in advance, and matches them with new data measured in actual distribution processes according to the Mahalanobis distance. Then the matching resolution is improved to 1/40 that of the conventional error offset method.

Ariane Transfer Vehicle - Logistic support to Space Station Freedom

NASA Astrophysics Data System (ADS)

Cougnet, C.; Ricaud, C.; Deutscher, N.

The attractiveness of the Ariane 5 and Ariane transfer vehicle (ATV) is described: it avoids the one-sidedness of the National STS, it increases the lift capacity to meet the demands of the Space Station, and it offers a system independent of, but consistent with, the STS in providing backup contingency capability. The Ariane 5/ATV system is able to launch and transfer any cargo module to the Space Station Freedom (SSF) and dispose of it at the end of the mission. Consideration is given to Space Station and SSF logistic support, and ATV operations and design. Diagrams are provided to illustrate the ATV's requirements and capability; an ATV mission toward the SSF; ATV design and components; the ATV's attitude, layout, and the architecture of the main propulsion system and avionic; and the ATV's performance. It is demonstrated that the Ariane 5/ATV system would be an adequate complement to the NSTS for logistic support of the SSF.

Photolithography and Fluorescence Correlation Spectroscopy used to examine the rates of exchange in reverse micelle systems

NASA Astrophysics Data System (ADS)

Norris, Zach; Mawson, Cara; Johnson, Kyron; Kessler, Sarah; Rebecca, Anne; Wolf, Nathan; Lim, Michael; Nucci, Nathaniel

Reverse micelles are molecular complexes that encapsulate a nanoscale pool of water in a surfactant shell dissolved in non-polar solvent. These complexes have a wide range of applications, and in all cases, the degree to which reverse micelles (RM) exchange their contents is relevant for their use. Despite its importance, this aspect of RM behavior is poorly understood. Photolithography is employed here to create micro and nano scale fluidic systems in which mixing rates can be precisely measured using fluorescence correlation spectroscopy (FCS). Micro-channel patterns are etched using reactive ion etching process into a layer of silicon dioxide on crystalline silicon substrates. Solutions containing mixtures of reverse micelles, proteins, and fluorophores are placed into reservoirs in the patterns, while diffusion and exchange between RMs is monitored using a FCS system built from a modified confocal Raman spectrometer. Using this approach, the diffusion and exchange rates for RM systems are measured as a function of the components of the RM mixture. Funding provided by Rowan University.

Medial Prefrontal Administration of MK-801 Impairs T-maze Discrimination Reversal Learning in Weanling Rats

PubMed Central

Watson, Deborah J.; Stanton, Mark E.

2009-01-01

Several executive functions rely on the medial prefrontal cortex (mPFC) in the rat. Aspiration and neurotoxic lesions of the mPFC impair reversal learning in adult rats [1, 16, 34, 55]. Systemic administration of MK-801, an NMDA receptor antagonist, impairs T-maze reversal learning in weanling rats but the role of mPFC NMDA receptor antagonism in this effect is not known in either adult or young animals. This set of studies showed that mPFC NMDA receptors are specifically involved in T-maze discrimination reversal in weanling rats. In Experiment 1, 26-day-old rats (P26) demonstrated a dose-dependent impairment following bilateral mPFC administration of either 2.5 or 5.0 µg MK-801 or saline (vehicle) during the reversal training phase only. In Experiment 2, P26 rats were trained on the same task, but 4 groups of rats received bilateral mPFC infusions during acquisition only (MK-SAL), reversal only (SAL-MK), both phases (MK-MK) or neither phase (SAL-SAL). MK-801 impaired performance only when infused during reversal. This suggests that NMDA receptor antagonism in the mPFC is selectively involved in reversal learning during development and this may account for the previously reported effects of systemic MK-801 on T-maze discrimination reversal in weanling rats. PMID:19643149

Reverse Core Engine with Thrust Reverser

NASA Technical Reports Server (NTRS)

Chandler, Jesse M. (Inventor); Suciu, Gabriel L. (Inventor)

2017-01-01

An engine system has a gas generator, a bi-fi wall surrounding at least a portion of the gas generator, a casing surrounding a fan, and the casing having first and second thrust reverser doors which in a deployed position abut each other and the bi-fi wall.

Neuromuscular Blockade and Reversal Agents: A Primer for Postanesthesia Nurses.

ERIC Educational Resources Information Center

Pesci, Barbara R.

1986-01-01

Presents a comprehensive review of neuromuscular blocking agents, reversal agents used in anesthesia, and factors affecting reversal. It is aimed at nurses who provide care to patients recovering from anesthesia. It discusses the neuromuscular transmission system, depolarizing muscle relaxants, nondepolarizing blocking agents, and criteria for…

KSC-07pd0636

NASA Image and Video Library

2007-03-13

KENNEDY SPACE CENTER, FLA. -- A flat bed truck hauls the container with the Experiment Logistics Module Pressurized Section inside away from the Trident wharf. The logistics module is part of the Japanese Experiment Module, known as Kibo. The logistics module is being transported to the Space Station Processing Facility at NASA's Kennedy Space Center. Kibo consists of six components: two research facilities -- the Pressurized Module and Exposed Facility; a Logistics Module attached to each of them; a Remote Manipulator System; and an Inter-Orbit Communication System unit. Kibo also has a scientific airlock through which experiments are transferred and exposed to the external environment of space. Kibo is Japan's first human space facility and its primary contribution to the station. Kibo will enhance the unique research capabilities of the orbiting complex by providing an additional environment in which astronauts can conduct science experiments. The various components of JEM will be assembled in space over the course of three Space Shuttle missions. The first of those three missions, STS-123, will carry the Experiment Logistics Module Pressurized Section aboard the Space Shuttle Endeavour, targeted for launch in 2007. Photo credit: NASA/Kim Shiflett

JEM Experiment Logistics Module Pressurized Section

NASA Image and Video Library

2007-04-02

In the Space Station Processing Facility, the JEM Experiment Logistics Module Pressurized Section is lowered onto a scale for weight and center-of-gravity measurements. The module will then be moved to a work stand. The logistics module is one of the components of the Japanese Experiment Module or JEM, also known as Kibo, which means "hope" in Japanese. Kibo comprises six components: two research facilities -- the Pressurized Module and Exposed Facility; a Logistics Module attached to each of them; a Remote Manipulator System; and an Inter-Orbit Communication System unit. Kibo also has a scientific airlock through which experiments are transferred and exposed to the external environment of space. Kibo is Japan's first human space facility and its primary contribution to the station. Kibo will enhance the unique research capabilities of the orbiting complex by providing an additional environment in which astronauts can conduct science experiments. The various components of JEM will be assembled in space over the course of three Space Shuttle missions. The first of those three missions, STS-123, will carry the Experiment Logistics Module Pressurized Section aboard the Space Shuttle Endeavour, targeted for launch in 2007.

Reverse Genetics for Mammalian Orthoreovirus.

PubMed

Stuart, Johnasha D; Phillips, Matthew B; Boehme, Karl W

2017-01-01

Reverse genetics allows introduction of specific alterations into a viral genome. Studies performed with mutant viruses generated using reverse genetics approaches have contributed immeasurably to our understanding of viral replication and pathogenesis, and also have led to development of novel vaccines and virus-based vectors. Here, we describe the reverse genetics system that allows for production and recovery of mammalian orthoreovirus, a double-stranded (ds) RNA virus, from plasmids that encode the viral genome.

Novel Designs of Quantum Reversible Counters

NASA Astrophysics Data System (ADS)

Qi, Xuemei; Zhu, Haihong; Chen, Fulong; Zhu, Junru; Zhang, Ziyang

2016-11-01

Reversible logic, as an interesting and important issue, has been widely used in designing combinational and sequential circuits for low-power and high-speed computation. Though a significant number of works have been done on reversible combinational logic, the realization of reversible sequential circuit is still at premature stage. Reversible counter is not only an important part of the sequential circuit but also an essential part of the quantum circuit system. In this paper, we designed two kinds of novel reversible counters. In order to construct counter, the innovative reversible T Flip-flop Gate (TFG), T Flip-flop block (T_FF) and JK flip-flop block (JK_FF) are proposed. Based on the above blocks and some existing reversible gates, the 4-bit binary-coded decimal (BCD) counter and controlled Up/Down synchronous counter are designed. With the help of Verilog hardware description language (Verilog HDL), these counters above have been modeled and confirmed. According to the simulation results, our circuits' logic structures are validated. Compared to the existing ones in terms of quantum cost (QC), delay (DL) and garbage outputs (GBO), it can be concluded that our designs perform better than the others. There is no doubt that they can be used as a kind of important storage components to be applied in future low-power computing systems.

The Logistic System Concept and Foreign Military Sales, U.S. Navy - Royal Norwegian Navy.

DTIC Science & Technology

1976-12-01

FMS organization and the theoretical logistical model. Areas of special concern are identified to be order processing , communications, transportation and training of individuals in the customer’s FMS organization.

Logistics support economy and efficiency through consolidation and automation

NASA Technical Reports Server (NTRS)

Savage, G. R.; Fontana, C. J.; Custer, J. D.

1985-01-01

An integrated logistics support system, which would provide routine access to space and be cost-competitive as an operational space transportation system, was planned and implemented to support the NSTS program launch-on-time goal of 95 percent. A decision was made to centralize the Shuttle logistics functions in a modern facility that would provide office and training space and an efficient warehouse area. In this warehouse, the emphasis is on automation of the storage and retrieval function, while utilizing state-of-the-art warehousing and inventory management technology. This consolidation, together with the automation capabilities being provided, will allow for more effective utilization of personnel and improved responsiveness. In addition, this facility will be the prime support for the fully integrated logistics support of the operations era NSTS and reduce the program's management, procurement, transportation, and supply costs in the operations era.

Static internal performance evaluation of several thrust reversing concepts for 2D-CD nozzles

NASA Technical Reports Server (NTRS)

Rowe, R. K.; Duss, D. J.; Leavitt, L. D.

1984-01-01

Recent performance testing of the two-dimensional convergent-divergent (2D-CD) nozzle has established the concept as a viable alternative to the axisymmetric nozzle for advanced technology aircraft. This type of exhaust system also offers potential integration and performance advantages in the areas of thrust reversing and vectoring over axi-symmetric nozzles. These advantages include the practical integration of thrust reversers which operate not only to reduce landing roll but also operate in-flight for enhanced maneuvering and thrust spoiling. To date there is a very limited data base available from which criteria can be developed for the design and evaluation of this type of thrust reverser system. For this reason, a static scale model test was conducted in which five different thrust reverser designs were evaluated. Each of the five models had varying performance/integration requirements which dictated the five different designs. Some of the parameters investigated in this test included; variable angle external cascade vanes, fixed angle internal cascade vanes, variable position inner doors, external slider doors and internal slider valves. In addition, normal force and yawing moment generation was investigated using the thrust reverser system. Selected results from this test will be presented and discussed in this paper.

Exploiting mosquito sugar feeding to detect mosquito-borne pathogens

PubMed Central

Hall-Mendelin, Sonja; Ritchie, Scott A.; Johansen, Cheryl A.; Zborowski, Paul; Cortis, Giles; Dandridge, Scott; Hall, Roy A.; van den Hurk, Andrew F.

2010-01-01

Arthropod-borne viruses (arboviruses) represent a global public health problem, with dengue viruses causing millions of infections annually, while emerging arboviruses, such as West Nile, Japanese encephalitis, and chikungunya viruses have dramatically expanded their geographical ranges. Surveillance of arboviruses provides vital data regarding their prevalence and distribution that may be utilized for biosecurity measures and the implementation of disease control strategies. However, current surveillance methods that involve detection of virus in mosquito populations or sero-conversion in vertebrate hosts are laborious, expensive, and logistically problematic. We report a unique arbovirus surveillance system to detect arboviruses that exploits the process whereby mosquitoes expectorate virus in their saliva during sugar feeding. In this system, infected mosquitoes captured by CO2-baited updraft box traps are allowed to feed on honey-soaked nucleic acid preservation cards within the trap. The cards are then analyzed for expectorated virus using real-time reverse transcription-PCR. In field trials, this system detected the presence of Ross River and Barmah Forest viruses in multiple traps deployed at two locations in Australia. Viral RNA was preserved for at least seven days on the cards, allowing for long-term placement of traps and continuous collection of data documenting virus presence in mosquito populations. Furthermore no mosquito handling or processing was required and cards were conveniently shipped to the laboratory overnight. The simplicity and efficacy of this approach has the potential to transform current approaches to vector-borne disease surveillance by streamlining the monitoring of pathogens in vector populations. PMID:20534559

The RAAF Logistics Study. Volume 3,

DTIC Science & Technology

human activity system which has been analysed by the Central Studies Establishment on behalf of the Defence Logistics Organisation. This work, now reported on, stems from a conviction that improved decision making can flow from an enhanced and integrated understanding of the activities necessary to fulfil the objectives of the system, by those involved in it or affected by it. This particular Volume deals with the description, using the Soft Systems Methodology described in Volume 1, of the RAAF Technical System which constitutes a major component of the overall RAAF

Feedstock Supply System Design and Economics for Conversion of Lignocellulosic Biomass to Hydrocarbon Fuels Conversion Pathway: Fast Pyrolysis and Hydrotreating Bio-Oil Pathway "The 2017 Design Case"

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kevin L. Kenney; Kara G. Cafferty; Jacob J. Jacobson

The U.S. Department of Energy promotes the production of liquid fuels from lignocellulosic biomass feedstocks by funding fundamental and applied research that advances the state of technology in biomass sustainable supply, logistics, conversion, and overall system sustainability. As part of its involvement in this program, Idaho National Laboratory (INL) investigates the feedstock logistics economics and sustainability of these fuels. Between 2000 and 2012, INL quantified and the economics and sustainability of moving biomass from the field or stand to the throat of the conversion process using conventional equipment and processes. All previous work to 2012 was designed to improve themore » efficiency and decrease costs under conventional supply systems. The 2012 programmatic target was to demonstrate a biomass logistics cost of $55/dry Ton for woody biomass delivered to fast pyrolysis conversion facility. The goal was achieved by applying field and process demonstration unit-scale data from harvest, collection, storage, preprocessing, handling, and transportation operations into INL’s biomass logistics model.« less

23rd Annual National Logistics Conference and Exhibition - Actionable Logistics, Resilient Operations

DTIC Science & Technology

2007-03-22

Chief Logistics Program and Industrial Management Division, USCG 12:00pm Luncheon in Jasmine Hibiscus with Speaker: Mr. Louis Kratz, Vice President...Corporation 12:00pm Luncheon in Jasmine Hibiscus with Speaker: VADM Ann Rondeau, USN, Deputy Commander, USTRANSCOM Presentation of the Edward...outcomes Operational Level Integration • JFC integrates JFC rqmts with national systems • “THIS IS THE ESSENCE OF JOINT LOGISTICS” • Optimize component

North Vietnam’s Military Logistics System: Its Contribution to the War, 1961-1969

DTIC Science & Technology

1977-06-10

51 Personnel Infiltration Proo 6egg....e.. 55 Transportation of Sup:li.esl... "....... 6.., Logistics Aocomplishments........... •.. . 68 III...embraced procurementg supply, and transportation . That this directorate was one of only three within the defense establish- meet illustrated the...the chapter dwells on techniques S/used to infiltrate personnel and to transport munitions, and concludes with a sumary of tho logistical

Availability of Maintained Systems

DTIC Science & Technology

1983-03-01

o -4 >1 w Administrative0 and Logistic Time 0 -4W 0 E-44 4q Operating Time ( > .1 Preventive Maintenance | 04 SOperating Time t Ready Time Operatinf...point in time. It excludes ready time, preventive-maintenance downtime, logistic time, and waiting or administrative downtime. It may be expressed as: A...satisfactorily at a given point in time. It excludes logistic tim-3 and waiting or administrative downtime. It includes active preventive and

An Empirical Study on Low-Carbon: Human Resources Performance Evaluation

PubMed Central

Chen, Quan; Tsai, Sang-Bing; Zhou, Jie; Yu, Jian; Chang, Li-Chung; Li, Guodong; Zheng, Yuxiang; Wang, Jiangtao

2018-01-01

Low-carbon logistics meets the requirements of a low-carbon economy and is the most effective operating model for logistic development to achieve sustainability by coping with severe energy consumption and global warming. Low-carbon logistics aims to reduce carbon intensity rather than simply reduce energy consumption and carbon emissions. Human resources are an important part of the great competition in the logistics market and significantly affect the operations of enterprises. Performance evaluations of human resources are particularly important for low-carbon logistics enterprises with scarce talents. Such evaluations in these enterprises are of great significance for their strategic development. This study constructed a human resource performance evaluation system to assess non-managerial employees’ low-carbon job capacity, job performance, and job attitude in the low-carbon logistics sector. The case study results revealed that the investigated company enjoyed initial success after having promoted low-carbon concepts and values to its non-managerial employees, and the success was demonstrated by excellent performance in its employees’ job attitude and knowledge. This study adopts the AHP method to reasonably determine an indicator system of performance evaluation and its weight to avoid certain human-caused bias. This study not only fills the gap in the related literature, but can also be applied to industrial practice. PMID:29301375

An Empirical Study on Low-Carbon: Human Resources Performance Evaluation.

PubMed

Chen, Quan; Tsai, Sang-Bing; Zhai, Yuming; Zhou, Jie; Yu, Jian; Chang, Li-Chung; Li, Guodong; Zheng, Yuxiang; Wang, Jiangtao

2018-01-03

Low-carbon logistics meets the requirements of a low-carbon economy and is the most effective operating model for logistic development to achieve sustainability by coping with severe energy consumption and global warming. Low-carbon logistics aims to reduce carbon intensity rather than simply reduce energy consumption and carbon emissions. Human resources are an important part of the great competition in the logistics market and significantly affect the operations of enterprises. Performance evaluations of human resources are particularly important for low-carbon logistics enterprises with scarce talents. Such evaluations in these enterprises are of great significance for their strategic development. This study constructed a human resource performance evaluation system to assess non-managerial employees' low-carbon job capacity, job performance, and job attitude in the low-carbon logistics sector. The case study results revealed that the investigated company enjoyed initial success after having promoted low-carbon concepts and values to its non-managerial employees, and the success was demonstrated by excellent performance in its employees' job attitude and knowledge. This study adopts the AHP method to reasonably determine an indicator system of performance evaluation and its weight to avoid certain human-caused bias. This study not only fills the gap in the related literature, but can also be applied to industrial practice.

Manganese Nitride Sorption Joule-Thomson Refrigerator

NASA Technical Reports Server (NTRS)

Jones, Jack A.; Phillips, Wayne M.

1992-01-01

Proposed sorption refrigeration system of increased power efficiency combines MnxNy sorption refrigeration stage with systems described in "Regenerative Sorption Refrigerator" (NPO-17630). Measured pressure-vs-composition isotherms for reversible chemisorption of N2 in MnxNy suggest feasibility to incorporate MnxNy chemisorption stage in Joule-Thomson cryogenic system. Discovery represents first known reversible nitrogen chemisorption compression system. Has potential in nitrogen-isotope separation, nitrogen purification, or contamination-free nitrogen compression.

48 CFR 52.215-15 - Pension adjustments and asset reversions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Pension adjustments and... Clauses 52.215-15 Pension adjustments and asset reversions. As prescribed in 15.408(g), insert the following clause: Pension Adjustments and Asset Reversions (OCT 2010) (a) The Contractor shall promptly...

Atomic-scale reversibility in sheared glasses

NASA Astrophysics Data System (ADS)

Fan, Meng; Wang, Minglei; Liu, Yanhui; Schroers, Jan; Shattuck, Mark; O'Hern, Corey

Systems become irreversible on a macroscopic scale when they are sheared beyond the yield strain and begin flowing. Using computer simulations of oscillatory shear, we investigate atomic scale reversibility. We employ molecular dynamics simulations to cool binary Lennard-Jones liquids to zero temperature over a wide range of cooling rates. We then apply oscillatory quasistatic shear at constant pressure to the zero-temperature glasses and identify neighbor-switching atomic rearrangement events. We determine the critical strain γ*, beyond which atoms in the system do not return to their original positions upon reversing the strain. We show that for more slowly cooled glasses, the average potential energy is lower and the typical size of atomic rearrangements is smaller, which correlates with larger γ*. Finally, we connect atomic- and macro-scale reversibility by determining the number of and correlations between the atomic rearrangements that occur as the system reaches the yield strain.

Direct CRISPR spacer acquisition from RNA by a natural reverse-transcriptase-Cas1 fusion protein

PubMed Central

Sidote, David J.; Markham, Laura M.; Sanchez-Amat, Antonio; Bhaya, Devaki; Lambowitz, Alan M.; Fire, Andrew Z.

2016-01-01

CRISPR (Clustered Regularly Interspaced Short Palindromic Repeat) systems mediate adaptive immunity in diverse prokaryotes. CRISPR-associated Cas1 and Cas2 proteins have been shown to enable adaptation to new threats in Type I and II CRISPR systems by the acquisition of short segments of DNA (“spacers”) from invasive elements. In several Type III CRISPR systems, Cas1 is naturally fused to a reverse transcriptase (RT). In the marine bacterium Marinomonas mediterranea (MMB-1), we show that an RT-Cas1 fusion enables the acquisition of RNA spacers in vivo in an RT-dependent manner. In vitro, the MMB-1 RT-Cas1 and Cas2 proteins catalyze ligation of RNA segments into the CRISPR array, followed by reverse transcription. These observations outline a host-mediated mechanism for reverse information flow from RNA to DNA. PMID:26917774